View Bid Results For Radar And Sonar Systems And Components Tenders

We found 5 Bid Results related to radar and sonar systems and components tenders. You can find Contractor details who won radar and sonar systems and components tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–1 of 5 tenders matching your filters

Housing Urban and Rular Development #8768148 AOC

Providing, Supplying, Commissioning Of Innovation Lab Equipments For Ghps & Ghs K. Veerapura Village In Ballari Taluk, Under 2515 Kkrdb Cmdq For The Year 2024-25. - Misc t-31, Six Axis Robotic ARM Consists of •Axis – 6 axis•64- bit ARM Cortex Processor8GB RAM64 GB Storage CapacityServo Motors with 9.6 Kg/cm Torque Payload – 200gReach – 200 mmUSB Support port Should have 8 MP Camera User can add various objects for detection Should identify pre trained Objects Should perform pick and place operation Dimension in mm(D x H): 1100 x 600 One pair of PCB and Mechanical casing should be provided 1 2 Petro robot it should consists of Should have 8 MP Camera 64 bit ARM Cortex Processor 2-D Lidar Sensor Person Recognitiobject Recognition Should consists of 4 leg armShould perform forward and reverse motion Should have rechargeable battery Should have 12 V rechargeable BatteryPower Adapter for Battery Recharge •Dimension in cm (L x W x H): 62 x 20 x 45•One pair of PCB and Mechanical casing should be provided •Tasks performed: 1. Walking2. Running3. Pushups4. Dance5. Jumping6. Sit and Stand positions7. Lane following 1 3 Line Following robo car it should consists of A Robotic car with 4 wheelsShould have 2 IR sensors Should have 4 DC motors Atmega 328P Microcontroller L298 Motor Driver for Direction and Speed control Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5 Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: Straight Weight: 250gm•One pair of PCB and Mechanical casing should be provided 1 4 Obstacle avoidance robo car it shouldconsists of Robotic Car with 4 Wheels Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8 Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 5 Voice controlled Robo Car it should consists of 1 30 Robotic Car with 4 Wheels DC motors with drivesBluetooth controllerShould perform motions by voice command Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22 mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (KgCm): 0.8Gearbox Shape: Straight Weight: 250gm •One pair of PCB and Mechanical casing should be provided 6 RC Tank Robot RC Tank Chassis Kit – 01ESP32 controllerLED Switch4 DC motors with Drive Battery 4 DC motors with drive ESP32 controllerDimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 7 AI Humaid Robot The AI Humaid robot can realize human body induction in different directions, can perform facial recognition, supports voice interaction, and can realize the function of guiding navigation and explaining. Should have obstacle avoidance algorithm, perceive the real-time changes in the surrounding environment, bypass the obstacles in the planned path, and choose the appropriate route Go forward and finally reach the target point. The robot should have a touchable high-definition display screen, which should display, video playback, product information query, map display and other functions. The robot should have an open SDK package and an open API, which can be used for development according to the application scenario, adding exclusive personality functions, and more in line with the actual application scenario. Technical specifications include a user-friendly interface, robust security measures, seamless integration, efficient performance, and scalability. Specification: Processor: Intel i5 8th Gen Motors: DC motors for smooth and precise movement.Microphone: High-sensitivity microphone for voice recognition and interaction.Speakers: High-quality speakers for audio output and ntertainment. Display: LCD display for user interaction, information visualization. Dimension in cm(L x W x H): 50 x 54 x 100 1 8.1 IoT Pack IoT Based Smart Agriculture Smart Agriculture model should include an Raspberry Pi, a 10 inch LCD display, soil moisture sensor, water pump, and relay to automate irrigation for plants. The soil moisture sensor should continuously monitor the moisture levels in the soil. When the soil is wet, the relay should remain off, preventing the pump from operating. However, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. The LCD display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. Constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart techlogy in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. Microcontroller: Raspberry piSoil Moisture Sensor – Measures soil humidity levels.DHT11/DHT22 Sensor – Monitors temperature and humidity.pH Sensor – Checks soil acidity or alkalinity.LDR (Light Sensor) – Detects sunlight intensity.Rain Sensor – Detects rainfall for irrigation control.Ultrasonic Sensor – Monitors water level in tanks.Water Pump – Automated irrigation control via relay.Servo Motor – Adjusts solar panel orientation.Relay Module (5V) – Controls high-power devices.IoT Connectivity – Data transmission via WiFi/Bluetooth.Cloud Storage – Stores real-time sensor data online.Web App – Displays real-time farm conditions.Power Adapter – Powers all connected components. 1 8.2 IoT Based Home Automation The Home Automation System model should include a Raspberry Pi, MQ-2 gas 1 31 sensor, buzzer, ultrasonic sensor, servo motor, 7-inch display, DHT11 temperature sensor, and two relays to enhance home convenience and safety. The ultrasonic sensor should detect approaching objects, triggering the servo motor to automatically open the door, while the 7-inch display presents real-time temperature readings. In one room, an IR sensor should detect motion, activating the relay to turn on an LED and a fan. Additionally, when the MQ-2 sensor detects smoke in the kitchen, the buzzer should sound an alert until the smoke dissipates. The system must feature a durable plastic body for reliability and easy assembly, showcasing the seamless integration of smart techlogies to create a safer and more efficient living environment, ensuring enhanced convenience and security. Microcontroller: Raspberry Pi for central control with WiFi and Bluetooth Ram: 4GB64 bit ARM Cortex ControllerGas Detection: MQ-2 sensor to detect smoke and gas leaksAlert System: Buzzer sounds when smoke is detectedObject Detection: Ultrasonic sensor detects approaching objects for automatic door controlDoor Mechanism: Servo motor opens the door upon object detectionDisplay: 7-inch screen for real-time temperature and system statusTemperature Monitoring: DHT11 sensor measures room temperature and humidityMotion Detection: IR sensor detects movement in the room Relay Module (x2): Controls LED and fan activationLighting & Ventilation: LED and fan turn on when motion is detectedBody: Durable plastic for reliability and easy assembly 8.3 Smart Watch health parameter monitoring kit Smart Watch is an invative wearable device project, and the model should include an ESP processor, OLED display, and four push buttons to provide a range of functionalities. The watch must feature a custom-designed PCB for compactness and efficiency, along with a durable watch belt for comfortable wear. One push button should be dedicated to displaying the current time, date, and day, while ather button should provide weather information, enhancing convenience for users. The remaining two buttons should be integrated for the IoT interface, allowing interaction with various smart devices and applications. This project demonstrates the potential of combining advanced techlogy with practical design, creating a multifunctional smartwatch that caters to modern lifestyle needs, ensuring reliability and user-friendly operation. ESP Processor – Core controller for smartwatch operations. OLED Display – Displays time, date, weather, and IoT interactions. Four Push Buttons – Dedicated for time, date, weather, and IoT control. Custom-Designed PCB – Ensures compactness and efficiency. Durable Watch Belt – Provides comfort for daily wear. Time, Date, and Day Display – Activated by a dedicated button. Weather Information Display – Accessed via a separate button. IoT Integration – Controls and interacts with smart devices. Energy-Efficient Design – Optimized for long battery life. Modern & User-Friendly – Enhances convenience and usability. 1 8.4 IoT Based Smart Cam Vision Snap should consist of an advanced security system that includes facial recognition for identifying individuals, enhancing security in restricted areas. Key components include a Raspberry Pi, a camera, and a display for real-time monitoring. This system features motion detection, which triggers alerts for unauthorized movement, significantly improving surveillance capabilities. It provides real-time alerts, enabling immediate responses to potential threats, while secure connectivity ensures the protection of sensitive data. Together, these features create a robust security solution for various applications, making Vision Snap an effective tool for safeguarding premises and enhancing overall security measures. Raspberry Pi – Central processing unit for AI-based security.Camera Module – Captures real-time footage and facial recognition.Display Screen – Shows live monitoring and alerts.Facial Recognition – Identifies individuals for security access.Motion Detection – Detects unauthorized movement and triggers alerts.Real-Time Alerts – Sends tifications for immediate response.Secure Connectivity – Protects sensitive surveillance data.AI-Powered Surveillance – 1 32 Enhances monitoring efficiency.Remote Access – Allows monitoring from any location.Robust Security System – Ideal for restricted areas and premises. 9.1 Immersive Techlogy Pack VR Headset Kit Should Consist of Following Line Item VR Head Set Storage: 512GBDisplay: Each eye experiences a resolution of 2064 x 2208 pixels, delivering sharp and immersive visuals.Processor: Powered by the Snapdragon XR2 Gen 2 chipset, providing enhanced performance for demanding VR applications.Refresh Rate: Supports a 120Hz refresh rate, ensuring smooth and responsive gameplay.Memory: Equipped with 8GB of RAM to handle multitasking and complex VR environments.Mixed Reality Capabilities: Features full-color passthrough, allowing users to blend virtual and real-world elements seamlessly.Design: Utilizes pancake optics to reduce the headsets size, offering a more comfortable fit for extended use. 1 9.2 32-inch or more smart LED TV to Stream a VR applications Resolution: HD (720p)Smart Platform: Google TVFeatures: Google Play, Google Cast Built-in, HDR10, Dolby Audio, Voice Remote, Live TV Streaming 1 9.3 AA Batteries – 10 Voltage: 3.7V (Lithium-Ion)Capacity: 1800–3500 mAhChemistry Types: Alkaline, NiMH (Rechargeable), Lithium, Zinc-CarbonSize: Diameter ~14.5mm, Length ~50.5mmWeight: ~23g to 30g 1 9.4 6DoF AR-VR Educational Controller can be used as and augmented reality (AR) device. Hold virtual heart, lungs, disaurs, plants and so much more in your hand to get an engaging learning experience. AR provides students with opportunities to deepen their kwledge within several areas, including:ScienceWorking with numbersSpatial concepts Content creationReal-life environments & scenarios 1 9.5 Samsung Galaxy M15 5G or ARCore supported Devices Display: 6.5-inch Super AMOLED, 1080 x 2340 pixelsProcessor: MediaTek Dimensity 6100+, Octa-coreRAM & Storage: 4GB/6GB/8GB RAM, 28GB/256GB storage (expandable up to 1TB)Rear Cameras: 50MP (wide) + 5MP (ultra-wide) + 2MP (macro)Front Camera: 13MPBattery: 6,000mAh, 25W fast charging OS: Android 14 with One UI 6Security: Side-mounted fingerprint sensor Connectivity: 5G, NFC supportDimensions: 160.1 x 76.8 x 9.3mm, Weight : 217g 1 9.6 VR Application Content for experintial learning a) VR chemistry lab, b) VR human anatomy, c) VR tour guide, d) VR English Learning App, e) VR space exploration app, f) VR electrical simulator app, g) VR Based Lathe Machine app, h) VR Based SMD Soldering & De soldering app 1 10 Drone Kit Should Consist of Following Line Item. Drone Kit with Wi-Fi and Camera is an ideal project for enthusiasts looking to build a custom drone from the ground up. This kit typically includes essential components such as a frame, brushless motors (BLDC), electronic speed controllers (ESCs), a flight controller board (FCB), and a Wi-Fi-enabled camera for real-time video transmission. It offers the flexibility of adding a LiPo battery for power, a remote controller, and propellers for flight stability. With built-in WiFi, users can easily control and monitor the drone using a mobile app or computer, while the camera provides aerial photography and video streaming capabilities. 1 x F450 Frame 4 x 1000kv BLDC Motor 4 x ESC Motor 1 x 2-3 Cell Battery Charger1 x 2200 mAh Lipo Battery1 x Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver1 x APM 2.8 Flight Controller (Without Compass) 1 11.1 Mini Makers Pack Thermo Sage Thermo Sage is a touch-free temperature monitoring system, and the model should include an ESP8266, OLED display, infrared temperature sensor, ultrasonic sensor, two LEDs, and a buzzer for efficient health monitoring. When the ultrasonic sensor detects a person within 10 cm, the infrared sensor measures their body temperature, displaying the result on the OLED screen. If the temperature is 1 33 rmal, the green LED lights up as an indication. However, if the temperature exceeds the rmal range, the red LED activates, and the buzzer sounds an alert. The design must feature a durable plastic body for reliable performance, offering a safe, contactless solution for monitoring body temperature, ideal for public health and safety applications. Microcontroller: ESP8266 for wireless connectivityDisplay: OLED screen for temperature readingsTemperature Sensor: Infrared sensor for touch-free measurementDistance Sensor: Ultrasonic sensor to detect person within 10 cmLED Indicators: Green LED for rmal temperature, red LED for high temperatureBuzzer: Alerts when temperature is above rmal rangeBody: Durable plastic for reliable performanceOne pair of PCB and Mechanical Design will be provided 11.2 Sun Quest Sun Quest model should include an Ardui Na, two LDR modules, a servomotor, a solar panel, and two LEDs to maximize energy efficiency. The LDR modules detect light intensity, enabling the system to track the sun’s position. When one LDR senses higher light intensity, the servo motor should rotate the solar panel toward that direction to optimize energy capture. The LEDs connected to the solar panel will demonstrate real-time power generation, lighting up to show how current is produced as the panel adjusts. The design must feature a durable plastic body for longevity, enhancing solar energy efficiency by dynamically following the sun’s path throughout the day. Microcontroller: Ardui Na for system controlLight Sensors: Two LDR modules for detecting light intensityActuator: Servo motor for rotating the solar panelSolar Panel: Generates and demonstrates power outputLED Indicators: Show real-time power generationBody: Durable plastic for longevity One pair of PCB and Mechanical Design will be provided 1 11.3 LightScape Lightscape model should include an Ardui Na, LDR module, IR sensor, and 6 LEDs to optimize energy usage based on environmental conditions. When the LDR detects darkness (indicating nighttime), the system should activate, keeping 3 LEDs ON for basic lighting. When the IR sensor detects movement, all 6 LEDs should turn ON for 5 seconds to enhance visibility for pedestrians or vehicles, then return to 3 LEDs ON. During daylight, when the LDR senses light, the LEDs should remain OFF to conserve energy. The design must feature a durable plastic body for reliability, providing efficient, adaptive street lighting that responds to both time of day and movement, significantly improving energy conservation and safety on the streets. Microcontroller: Ardui Na for system automationSensors: LDR for detecting light levels, IR sensor for motion detectionLEDs: 6 LEDs for adaptive street lightingLighting Control: 3 LEDs ON at night, all 6 ON when motion is detected for 5 secondsEnergy Conservation: LEDs OFF during daylight Body: Durable plastic for reliabilityOne pair of PCB and Mechanical Design will be provided 1 11.4 Navwave NavWave is a sonar-inspired object detection system, and the model should include an ESP8266, OLED display, ultrasonic sensor, and servo motor to detect and display nearby objects. The ultrasonic sensor, mounted on the servo motor, should continuously rotate from 0 to 180 degrees, scanning the surroundings for obstacles. As objects are detected, the system should display a dotted pattern on the OLED screen, similar to a submarine radar interface, providing a real-time visual representation of object proximity and location. The design must feature a durable plastic body for reliability, simulating sonar navigation and offering a dynamic way to monitor nearby obstacles through the rotating ultrasonic sensor and radar-like display. Its robust design ensures optimal performance in various environments, making it an excellent tool for obstacle detection and navigation. •Microcontroller: ESP8266 for processing and wireless capabilityDisplay: OLED screen with radar-like visual representationSensor: Ultrasonic sensor for object detectionActuator: Servo motor for 0°-180° scanning motionDetection Mechanism: Real-time scanning and obstacle mappingBody: Durable plastic for reliabilityOne pair of PCB and Mechanical 1 34 Design will be provided 12 Electronics & Hardware Kit Universal Electrical/Electronic breadboard plug and play training kit designed to perform the experiments from the basic to advance level of electrical and electronics exercises, This kit is made easy to conduct experiments by plugging in the components in to the specifically designed breadboard. Should have built-in Function generator, power supply and required meters List of components Resistors SetPotentiometers n-linear resistors VDR-, LDR-, NTC-, PTC resistors Capacitors SetTransformer 1 13.1 Experiential Skilling Lab set Electrical Booth Spec - 01 Each workstation should have dimensions of 4 ft width and 6 ft height. The material used for the workstations construction must be high-quality plywood with a thickness of at least 10mm, ensuring durability and stability. The workstation should be designed in a plus-shaped configuration, where each arm of the plus symbol represents an individual training domain. The work station should have 4 station where, Electrical installation, Plumbing and CCTV installation can be practiced All necessaries aids for this training should be provided in this work station 1 13.2 CCTV Installation kit To provide a comprehensive training setup for students to learn and practice the installation, configuration, and maintenance of CCTV systems, including cabling, DVR setup, and network integration for monitoring and recording. Dome Cameras –1 Bullet Camera-1 DVR/NVR Unit -1 Cables and AccessoriesPower Supply with adaptorsSwitch and RouterDisplay and MonitoringNetworking Tools 1 13.3 Domestic Electric Wiring Kit To provide a comprehensive training setup for students to learn and practice the installation, wiring, and maintenance of domestic Electric wiring methods, includes reading and understanding electrical drawings, Switch gears and colour coding of cables. Domestic electric wiring kit – 1 set MCB, 4P, 25ADistribution Box 3 tier 36 modules RCCB 2P 40A 30mA ACtypeMCB xC60 1P 2A C 10000A6A 1-WAY SWITCH 6A 2-way Switch6A/16A 3-Pin Socket Outlet PVC Casing-Capping, 50mmPVC CasingCapping, 25mmPVC Conduit, High density, 19mmSaddles, 19 mmPOP screwPVC Junction Box 19mm, 1 wayPVC Junction Box 19mm, 2 wayPVC Junction Box 19mm, 3 wayPVC Junction Box 19mm, 4 wayBatten Holder2- Module Box with surface plate, PVC4-Module Box, PVC8-Module Box, PVCTools – 1 set 12V Cordless Drill machinePhilip bit Spirit Level, 30 cm Steel Rule, 30 Cm Wire Stripper Heavy duty cable cutter Try square Measurement tape Mini Hack Saw frame with blades Hack Saw Frame with blades Crimping tool, tube type lugs File Set Electrician knifeAllen key set Hole saw, 22 mm Screw Driver set se plier Drill Bit Set Mini screw driver set Aluminum Stair Case, 3 step 1 13.4 Plumbing Installation Setup To equip a plumbing training lab with all necessary tools and equipment to provide students with hands-on experience in basic and advanced plumbing techniques, including pipe fitting, jointing, fixture installation, and system testing. Tools for Pipe Cutting and ShapingPipe Cutter:Hacksaw:Pipe Bender:PVC Pipe Cutting Scissors:Tools for Threading and JoiningPipe Threaded Set: Teflon Tape Dispenser:Plumbers Soldering Kit:Adhesive Application Kit: Wrenches and SpannersAdjustable Pipe Wrench:Basin Wrench:Ring Spanner Set:Testing and Measurement ToolsWater Pressure Gauge: Flow Rate Meter:Leak Detection Kit: Spirit Level:Plumbing Fixtures for Installation PracticeSink and Basin Fixtures:Faucets and Taps:Shower Unit: Drainage System ComponentsP-traps and S-traps:Wastewater Pipes:Junction Boxes: 1 14 Smart Solar Renewable Energy Kit Solar Photovoltaic Training Kit for Lab experimentsPV Module Stand: 2s. 1 35 15 SAM S-5 Missile Educational Training Kit Missile defense systems are essential for national security, airspace protection, and strategic deterrence. This will explore the working principles of the missile system, focusing on its launch mechanism, guidance techlogy, and interception capabilities. Additionally, it will analyze the applications of the model in air defense, including target tracking, threat neutralization, and military strategy. SAM S-5 Missile System should consist of the following items. Raspberry Pi x 1Camera Module x 1Lidar or Ultrasonic sensor x 1 Servo MotorsGyroscope x 1Shooter x 1Battery x 1 Battery Adapter x 1 1 16 GEO Satellite Communication Educational Training Kit Satellites play a crucial role in modern communication, navigation, weather forecasting, and scientific research. This will explore the communication and data transmission process in GEO satellites analyze the applications of GEO satellites in telecommunications, weather forecasting, and remote sensing. GEO Satellite Communication Kit should consist of the following items. Raspberry Pi x 3ESP8266 x 3ZigBee Module and adapter x 3 RF Module x 3 Temperature and Humidity Sensor x 2 Soil Moisture Sensor x 1 NPK Sensor x 1 Pressure Sensor x 2Co2 Sensor x 1Camera Module x 1Buzzer x 3 LEDsRover Model x 1Base station Model x 1Battery Battery Adapter 1 17 LUNAR PATH Explorer- Educational Rover BOT It should comes with Matt finished metal chassis. Included all sensor metal clamps, and high torque DC Johnson A grade motors. Compatible with Ardui, raspberry, etc. Easy to assemble. Assembly manual provided in the kit. All required components, sensors, and tools are provided in the kit. It should consists of following items: 12V DC 10 RPM MOTORS -2ULTRASONIC SENSORS - 3IR SENSORS - 5 WIDE TRACK WHEELS - 4WIDE TRACK BELTNUT BOLTSSPANNER TWO IN ONE SCREWDRIVER,JUMPER WIRESSG90 SERVO MOTOR -1 ON/OFF ROCKER SWITCH -2TOGGLE SWITCH - 2MOTOR WIRES 1 18 Package . 1 Atal Tinkering Lab The package should include all items As per QR/specification for Package . 1 - Atal Tinkering Lab of NITI AAYOG Electronics Development, Robotics, Internet of Things and Sensors approved by NITI AAYOG (Approved Copy of Qrs / Specification uploaded in Gem portal) Specification: Microcontrollers & Boards:Ardui U/Na/Mega (or equivalents).Raspberry Pi 3 Model B+.ESP32, de MCU.Prototyping Tools:Solderless breadboards (400 and 800 pins).Self-adhesive proto shield and FR2 A-grade materials.Hook-up wires, jumper cables (M-M, M-F, F-F), and alligator connectors.Sensors & Modules:Wide range of sensors: Humidity, temperature, motion, gas (MQ series), IR, ultrasonic, PIR, and more.RFID Reader, Bluetooth, GSM, GPS, and Wi-Fi modules.Capacitive touch, soil moisture, rain, and color recognition sensors.Displays & Actuators:16x2 LCD display with I2C interface. LED matrices, RGB LEDs, and various single-color LEDs.Motors: DC, stepper, servo, vibrating, and BO motor with driver modules.Miscellaneous Components: Resistor and capacitor kits, diodes, transistors, and ICs (LM555).Relays, motor drivers, and piezoelectric plates.Robotics, drone, and application-specific DIY kitsPower & Connectivity:USB cables, battery packs, power banks, and clips. 1 19 Package . 2 Atal Tinkering Lab – Rapid Prototyping Tools The Package should include all items As per QR/specification for Package .2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG Specifications: 3D Printer Kit and tools Dedicated UPS/Power back up Filament for 3D printer Filament Storage Box Set of Arts & Crafts Accessories – e.g.- stationary items and basic prototyping materials 1 20 Package . 3 Atal Tinkering Lab – Mechanical, Electrical and Measurement Tools The package should include all items As per QR/specification for Package .3 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI 1 36 AAYOG Specification: Cutting Tools: Hacksaw frame with blades (standard & mini).File set, mini file set, and flexible cutting mat. Hand Tools: Pliers (4.5-inch), tweezers, ball pein hammer, claw hammer, C-clamp, spanner set, Allen key set, wrench, and wire strippers. Drilling Tools: Drill machine set with workstation.Drill bit set and vice (rmal). Screwdrivers & Soldering Tools: Precision screwdriver set, electric screwdriver set, soldering kit, and soldering helping hand. Measuring & Testing Tools: Digital multi meter, digital Vernier caliper, spirit level, measuring tape, and pen electric tester. Digital oscilloscope, adapters, telescope, DIY paper microscope Power Tools: Cordless rotary multi tool, dual-temperature heat gun, air blower, and hot glue gun.Organization & Workspace: Plastic trays, pegboard, and return measuring tools 21 Intel Core i5 - 1245U Mid Level Laptop - tebook Specification: Laptop Type: Mid LevelIntel Core i5 - 1245UOperating System (Factory PreLoaded)Window 11 HomeRAM Size (GB)16Display Size (in cm) – Diagonal: 35.56 to 38.09 (14 In to 14.99 In)Capacity of Storage Drive (in GB)512 1 22 65 Inch Display Interactive Panel with CPU Size (Diagonal): 65 or higher Panel Techlogy: IPS / VA Resolution: (Minimum) 4K (3840 x 2160) Viewing Angle (Hx V): 178*178RAM: 4 GB or higher On-board memory: 32 GB or higher Input (Minimum): 3 x HDMI, 4 x USB (Out of, which min 2xUSB3.0),1 xAudio, 1 x OPS slot, 1 x USB Type C Port Output: (Minimum) 1 x HDMI, 1 x Audio The software enables teachers to generate presentations using Al in PPT or PDF format. The teachers can select their Class, Subject, Topic and language to generate the presentations. The software supports all Indian and Global languages including English, Hindi, Marathi, Kannada, Tamil, Telugu, Gujarati, etc. Using Al, the software is able to analyse the Class and Subject and generate output accordingly. Using the Ask Me Anything tool, the teachers can search queries related to any topic and the Al is able to generate Class-wise and Subject-wise results including Images, Videos (YouTube Videos) and Explanation. Connected Classroom Software has in-built Generative Al capability to search and import filtered content relevant to Class and Subject. - images, videos, explanation for queries given by teachers in all languages. Teachers are able to import images and videos for teaching in class. The software has a text-to-speech function (for all languages) to convert text-based explanation into speech and read out loud in class. Software has Two-Way Live Conferencing Feature with education specific features Live conferencing feature also enables recording which gets directly uploaded to cloud.. Reports: Detailed reports for Attendance, Assessments, Study Material, are available for administrators to access. Administrators should be able to access to view the whiteboard saved by the teachers and monitor the usage.. Below tools and simulations are provided for enhancing the teaching-learning experience: - Graph: Demonstrating equations using 2D and 3D visualizations - Calculator: Standard and scientific - PHET simulation library with 100+ simulations across Maths, Physics, Chemistry, Biology. 1 23 2 kVA OFF LINE UPS Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete 1 24 Battery 75/80 AH capacity Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 1 25 6Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required s. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 37 26 8 Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required s. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 27 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire with switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 1 28 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire without switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box 1 29 1.5 mm2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1 30 Fans : 48 Sweep (1200 mm) Regular model Supplying capacitor type ceiling fan complete with down rod blades, shackle, capies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 1 31 LED Down Light 15-18W Supplying of recess mounting n integrated type LED down light W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 1 32 Fall Ceiling for Invation lab to cover entire Area Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. 1 33 Floor Mat for Invation lab to Cover the entire Lab Providing and laying lileum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, labour, complete as per specifications 1 34 Repair and Replacement of Windows and Doors (if required) Repairing door and window frames with available wood to the required size. 1 35 Painting Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² 1 38 with paint of approved quality to give an even shade, after thoroughly rooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-ccharge. (The gloss should be 50% @ 60 degree angle with 10 years life) 36 Providing and laying Cement concrete flooring 40 mm thick with 20 mm minal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry complete.(P .59, SI. 9.1 PWD SR 2023-24 Volume 2) 1 37 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.( SI. 8.33.1 PWD SR 2023-24 Volume 2) 1 38 Polyurethane based ingle Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2 , having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content t less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2 , and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification (P .A-149, SI. 15.2 PWD SR 2023-24 Volume 1) 1 39 Model Table - Modular Table with MDF Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface t to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 1 40 Student Table - Modular Table with Particle Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to 1 39 be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface t to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 41 Trainer Table - Executive Table with Pedestal, 3 Side Storage Unit 1 42 Student Chair – Providing and supplying Unbranded wood chair/stool, already assembled Technical Specifcation Chair feature painting. Color-Other, Style Traditional. Furniture Assembly Already Assembled. Material Wood. Additional Parameters Additional Features good quality wooden arm chairs. 1 43 Trainer Chair - Revolving Chair with Synchronic tilt mechanism 1 44 Training of Teachers The Master Trainer will conduct a 2-day Training of Trainers (ToT) program for educators on effectively utilizing the Invation Lab . The training should cover hands-on learning methodologies, STEM education, and practical applications of lab tools and techlogies (P .A-48, SI. 1 PWD SR 2023-24 Volume 1)

Contract Date: Ref. Documents Contract Value : ₹ 53.34 Lakh