View Bid Results For Pump House Automation Tenders

We found 350 Bid Results related to pump house automation tenders. You can find Contractor details who won pump house automation tenders along with contract details in Bid awards announcements section.

Indian Tenders
5
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
221
86
43
Tender Publishing Platform
14
336
State / UT
22
111
89
57
18
14
12
11
9
4
4
3
3
3
2
2
2
1
1
1
1
1
1
Contract Value
136
55
78
81
Publish Date
0
0
0
0
0
Sector
15
210
65
20
14
12
7
6
5
3
2
2
1
1
1
1
Ownership
6
249
64
23
11
2
1
Within keyword
Active filters:
Showing 1–7 of 350 tenders matching your filters
1.
Drinking Water Supply and Sanitation #11351667 Technical Bid
Tender for Less Credit Of Old Bricks , Less Credit Of Old Bricks*** , Less Credit Of Old Brick Bats , Less Credit Of Old Panel Board At Existing Water Works , Supplying, Erection, Testing And Commissioning Of Horizontal Motor Pumping Set For Raw Water Having Head 12 M As Per The Indicated Requirements Of Discharge In Lpm And Power Capacity In Bhp Make: Ksb, Cri, Kirlosker, Crompton Greeve, Lubi) For Raw Water 1800Lpm X 12 Mtr Head , Less Credit Of Old Pumping Machinery For Clear Water At Existing Water Works 2 Nos. 30.00 Bhp X 45.00 Mtr Head 1600 Lpm , Less Credit Of Old Pumping Machinery For Raw Water At Existing Water Works 2 Nos. 7.5 Bhp X 12.00 Mtr Head 1600 Lpm , Water Treatment Plant (Wtp) - Designing, Testing, Construction And Commissioning Of 1.00 Mld Capacity Water Treatment Plant Including Inlet Channel Alum Dozing, Flash Mixing, Clari Floculator, Filtter Box, Over Head Reservoir For Back Wash, Waste Water Tank, Including All Civil Work Pumping Machinery And Electric Cabling, Control Panel, Entire Piping Network Of Suitable Size, Supplying, Laying, Cutting And Jointing Of Di Pipes From Raw Water Pump To Inlet Box Of Wtp, Wtp To Cwt And Suction Well For Cw Including, Di Specials Suitable Size Sluice Valves, Hodies, Manhole Covers, Air Scour Equipment, Chemical House Including Chlorination Equipment And Arrangement Of Flow Measurement And Sand Bed With Automation Complete In All Respects As Per Approved Nit. (Sluice Valve Of Make Ivcawag)On Complete In All Respects As Per Approved Nit. (Sluice Valve Of Make Ivcawag) , I) Operation And Maintenance During Defect Liability Period After 3 Months Trial Run Period , Ii) Operation And Maintenance During 1St Year After Defect Liability Period , Iii) Operation And Maintenance During 2Nd Year , Iv) Operation And Maintenance During 3Rd Year , V) Operation And Maintenance During 4Th Year , Vi) Operation And Maintenance During 5Th Year , Item Description , Hsr Items For Dnit Name : Bahbalpur Estimate For Improvement Water Supply Scheme In Village Bahbalpur Distt. Hisar [Puh/2025- 26/104314] Construction Of 2 Nos. Reinforced Cement Concrete S And S Tank, Construction Of Wtp 1.00 Mld Capacity, Construction Of Cwt, Construction Of boundary wall Raising Of Pump Chamber And Pipe Line At Head Works, Construction Of I/Channel Inside W/W, Replacement Of Pumping Machinery At W/W, Laying, Jointing, Cutting , Commissioning And Testing Of 100 Mm I/D 13720 Mtr. 150 Mm I/D Di Pipe 2265 Mtr., And 200 Mm I/D 170 Mtr. Di Pipe In Village Bahbalpur Including Operation And Maintenance Of Wtp During Defect Liability Period Of 12 Months After Successful Completion Of 3 Months Trial Run And Thereafter For 5 Years Complete In All Respect And All Other Works Contingent Thereto.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Haryana View Result →
2.
Drinking Water Supply and Sanitation #11292490 Technical Bid
Tender for Survey, Soil Investigation, Design, Supply Of All Materials, Labour, T&P Etc. Required For Construction, Erection, Completion, Testing And Commissioning Of Water Supply Works Including (But Not Limited To) Reinforced Cement Concrete Oht (03 Nos.), Rising Main, Distribution System, Tube Wells, Pump House, Boundary Wall, Mcs/Scadaroom And Site Development Works Etc. And Other Appurtenant Works Including Scada And Automation On Turnkey Basis As Per Specifications In Tender Document For Nagar Palika Parishad Muzaffarnagar Water Supply Reorganization Scheme Zone-1,2,3,4&5 (Part-1), Distt. Muzaffarnagar. The Scope Of Work Also Includes Trial Run Of 03 Months And Defect Liability Period Of 12 Months For Civil Works And 24 Months For E/M Works Which Shall Start After Completion Of Successful Trial& Run And Handing Over Of All Works. All Completed And Commissioned Work Under Nagar Palika Parishad Muzaffarnagar Water Supply Reorganization Scheme, Zone-1,2,3,4&5 (Part-1), Distt. Muzaffarnagar Shall Be Handed Over To Nagar Palika Parishad Muzaffarnagar After 03 Months Successful Trial Run Period.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Uttar Pradesh View Result →
3.
Drinking Water Supply and Sanitation #11287260 Technical Bid
Tender for Less Credit Of Old Panel Board At Existing Water Works , Less Credit Of Old Pumping Machinery For Raw Water At Existing Water Works 2 Nos. 7.5 Bhp X 12.00 Mtr Head 1500 Lpm , Water Treatment Plant (Wtp) - Designing, Testing, Construction And Commissioning Of 1.50 Mld Capacity Water Treatment Plant Including Inlet Channel Alum Dozing, Flash Mixing, Clari Floculator, Filtter Box, Over Head Reservoir For Back Wash, Waste Water Tank, Including All Civil Work Pumping Machinery And Electric Cabling, Control Panel, Entire Piping Network Of Suitable Size, Supplying, Laying, Cutting And Jointing Of Di Pipes From Raw Water Pump To Inlet Box Of Wtp, Wtp To Cwt And Suction Well For Cw Including, Di Specials Suitable Size Sluice Valves, Hodies, Manhole Covers, Air Scour Equipment, Chemical House Including Chlorination Equipment And Arrangement Of Flow Measurement And Sand Bed With Automation Complete In All Respects As Per Approved Nit. (Sluice Valve Of Make Ivcawag) , Operation And Mentainance During Defect Liblity Period After 3 Months Trial Run Period , Operation And Mentainance During 1St Year After Defect Liablity Period , Operation And Mentainance During 2Nd Year , Operation And Mentainance During 3Rd Year , Operation And Mentainance During 4Th Year , Operation And Mentainance During 5Th Year , Item Description , Hsr Items For Dnit Name : Dhansu:- Estimate For Improvement Of Water Supply Scheme In Village Dhansu Distt. Hisar [Puh/2023- 24/93300] Construction Of 1 No. Wtp 1.50 Mld Capacity, Construction Of 1 No. Reinforced Cement Concrete S And S Tank, Construction Of 2 Nos. Reinforced Cement Concrete Cwt, Construction Of Pump Chamber, Construction Of Reinforced Cement Concrete S. S. Well For Raw And Clear Water, Construction Of Road And Path, Pipe Line At Head Works, Replacement Of Pumping Machinery At W/W, Laying, Jointing, Cutting , Commissioning And Testing Of 150 Mm I/D 900 Mtr. Di Rising Main W/W To Exist. B/S In Village Dhansu, Including Operation And Maintenance Of Wtp During Defect Liability Period Of 12 Months After Successful Completion Of 3 Months Trial Run And Thereafter For 5 Years Complete In All Respect And All Other Works Contingent Thereto.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Haryana View Result →
Himachal Pradesh View Result →
5.
Drinking Water Supply and Sanitation #11196434 Technical Bid
Tender for Survey, Soil Investigation, Design, Supply Of All Materials, Labour, T&P Etc. For Construction, Erection, Completion, Testing & Commissioning Of Water Supply Works Such As Over Head Tank, Tube Well, Rising Main, Distribution System, Pump House, Boundary Wall, Gate, Site Development, Renovation Of Existing Facilities, Including Plc Scada Automation And Other Appurtenant Works Of Water Supply As Specified In Tender Document Of Chhitauni Nagar Panchayat Water Supply Reorganization Scheme, District- Kushinagar On Turnkey Basis. The Scope Of Work Also Includes Trial & Run Of 3 Months And Defect Liability Period Of 12 Months For Civil Works & 24 Months For E&M Works After Completion Of Successful Trial & Run. All Completed And Commissioned Works Of Above Scheme Shall Be Handed Over To Concerned Ulb.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
6.
Drinking Water Supply and Sanitation #11050852 Technical Bid
Tender for Survey, Soil Investigation, Design, Supply Of All Materials, Labour, T&P Etc. Required For Construction, Erection, Completion, Testing And Commissioning Of Water Supply Works Including (But Not Limited To) Reinforced Cement Concrete Oht (4 Nos.), Rising Main, Distribution System, Tube Wells, Pump House, Boundary Wall And Site Development Works Etc. And Other Appurtenant Works Including Scada And Automation On Turnkey Basis As Per Specifications In Tender Document For Nagar Nigam Meerut Water Supply Re-Organization Scheme Zone 5, 6 &7. The Scope Of Work Also Includes Trial Run Of 03 Months And Defect Liability Period Of 12 Months For Civil Works And 24 Months For E/M Works Which Shall Start After Completion Of Successful Trial & Run. All Completed And Commissioned Work Under Nagar Nigam Meerut Water Supply Re-Organization Scheme Zone 5,6 &7 Shall Be Handed Over To Meerut Nagar Nigam After 03 Months Successful Trial Run Period.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
7.
Drinking Water Supply and Sanitation #10957789 Technical Bid
Tender for Survey, Soil Investigation, Engineering Design/Drawing, Supply Of All Materials, Labour, T&P Etc. Required For Completion Of Following Works Of Hamirpur Npp & Kurara Np Re-Organization Water Supply Scheme Construction, Erection, Completion, Testing & Commissioning Of Water Supply Works Such As:Intake Well Cum Pump House & Approach Bridge And Associated Works, Water Treatment Plant (20 Mld Capacity) And Its Associated Works, Tube Well, Pump House And Its Associated Works, Raw Water Rising Main From Intake Well To Water Treatment Plant, Reinforced Cement Concrete Over Head Tanks, Zpss/Clear Water Reservoir Cum Pumping Station, Rising Main, Feeder Main, Distribution System, Drinking Water House Connection, Scada Room, Chlorination Room, Meter Room, Panel Room, Staff Quarter, Boundary Wall & Site Development Works Etc. And Other Appurtenant Works Including Automation And Scope Of Work Also Includes The Proper Completion Of Project In All Respect. The Other Details& Scope Of Work Shall Be As Per The Specifications Stipulated In The Tender Document.The Scope Of Work Also Includes Commissioning, Testing, Trial Run Of 3 Months & Defect Liability Period Of 12 Months For Civil Works & 24 Months For E/M Works After Completion Of Successful Trial Run. All Completed And Commissioned Work Shall Be Hand Over To Jal Sansthan, Chitrakoot Dham Mandal / Nagar Palika Parishad Hamirpur Distt- Hamirpur After 3 Month Successful Trial Run Period.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
8.
Housing Urban and Rular Development #10827881 Price Bid
Repair Maintenance Contract Electrical And Mechanical Services At Dr Bsa Hospital Rohini Delhi Sh Providing And Installation Of Microprocessor Based Control Panel Wireless Connectivity With Complete Scada Software For Automation Of Pump House
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Delhi View Result →
Delhi View Result →
Kerala View Result →
Kerala View Result →
12.
Public Administrative Department #10660996 Price Bid
Tender For Work of installation of 12 inch tube well near the school in Amar Vihar Colony. - Transportation, installation, dismantling of rig achine and logging of bore hole. 3 Drilling and Lowering of Tube well assembly 4 Erection of Rig Machine and Camp equipment at site. 5 Dismentalling of Rig machine and Camp equipage after complition of work. 6 Drilling of bore of 675mm dia (with pilot) bore. 7 GL to 100 MBGL 675mm. Dia bore 8 101 to 160 MBGl 675mm Dia bore 9 loging of bore holw by departmental / approved electric logger. 10 Zone Testin in water quality problem ares including all required material. Labour, T&P etc Complete in all respest (At least 03 Nos. start a sample) 11 Lowering of Tube well assembly of 300 mm Dia size with Shrouding of pea-gravel. 12 GL to 100 MBGL (300mm. Dia) 13 101 to 150 MBGL (300mm. Dia) 14 Tube well Assembly 15 MS tubewell assembly with all required parts like plane pipe, slotted pipe (as required up to 50% of plane pioe) rings, wall cap ball plug, clamp, reducer, Central Guide, Support structure etc. as required & as per typed design Complete in all respect- 300 mm dia. 16 Development of tube well by air compressor (250PSI) 17 Transportation, Installation, Dismantling of 250/350/600 PSI Compressor 18 Charges for Development by 250 PSI Compressor per hour 19 Development of tube well by O.P Unit 20 Transportation, erection, dismentlling of 1 Cuses/3 Cuses OP Unitand Yield test. 21 Charge of development by 3 cusec O.P Unit Yalid Test 22 Electrical well logging 23 Pea- gravel 24 Supply of lal kuan pea gravel size of 1.6mm to 4.8mm which is to be used during lowering or tubewell assembly and development of tubewell 25 Yield test, chemical test & site development 26 Chemical test of water 27 S.I.T.C of Submersible Pump Setwith 24 meter coloum pipe, NRV, CI D/F bend 90 degree , CL A/F tee, D/F pipe (1.5M long 02 Nos and 1.0 m Long 01 No), Earthing, Painting, Toolset , 12 Stablizer, wiring of Pump house internal and external,chainpully block and all puming plant accessories with nut bolts and rubber packing etc. ( All other items for pumping plant items not includes in SCADA automation pumping plant items) 28 Additional column pipe in 3m length 29 GAUGES 30 Prassure Guage 31 Depth Guage 32 Pump 33 SPECIAL TOOLS AND SPANNERS IN A TOOL KIT 34 Pipe wrenches 35 D/E spanner 22/6mm 36 Adjustable wrench 300mm 37 Screw Driver 38 300MM 39 150MM 40 Combination pliers 200mm 41 Noise pliler 150mm 42 Hammer with handle 1kg 43 Line tester (Tapariya Make) 44 LIFTING TACKLES (REPUTED MAKE) 45 Electrification of pumphouse (internal & external) 46 Cover 47 Motor inspection fees 48 INSTALLATION AND EARTHING 49 Installation of pumping plant and along with all nessuary fitting including bypass and delivery arrangement, airline and gauges fittingnetc. Complete in all respect with supply & burying of 600 mm x 600mm x 6mm G.I plate vertically for dauble earthing with its top at lease 3m Below ground level complete with 40mm dia G I pipe and funnel for watering and one earthing load of 25 mm x 3mm GI strip in L.S. 32mm dia . GI pipe upto switch bold 30 Sq. Cm. CI frame with hinges cover masonry and salt at least 200mm thick all a ground etc. complete in all respect as per ISS and Indian electricty 50 Commissioning & testing of pumping plant 51 One month watch & during the period of Installation 52 Power connection of UPPCL 53 Processing fees for 19 KW 54 Energy meter upto 20 KW 55 Security Charges @ 4000.00 for LMV7 56 11KV HT line with Accessories Material Per Km for 100 KVA 57 Distribution Transformer 11KV/4Kw with double pole substation for 25 KVA 58 Civil Work 59 Construction of room 3.60x3.60 Size. Outer size
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Uttar Pradesh View Result →
13.
Public Administrative Department #10660993 Price Bid
Tender For Work of installation of 12 inch tube well in Mohalla Satta Jatwan. - Transportation, installation, dismantling of rig achine and logging of bore hole. 3 Drilling and Lowering of Tube well assembly 4 Erection of Rig Machine and Camp equipment at site. 5 Dismentalling of Rig machine and Camp equipage after complition of work. 6 Drilling of bore of 675mm dia (with pilot) bore. 7 GL to 100 MBGL 675mm. Dia bore 8 101 to 160 MBGl 675mm Dia bore 9 loging of bore holw by departmental / approved electric logger. 10 Zone Testin in water quality problem ares including all required material. Labour, T&P etc Complete in all respest (At least 03 Nos. start a sample) 11 Lowering of Tube well assembly of 300 mm Dia size with Shrouding of pea-gravel. 12 GL to 100 MBGL (300mm. Dia) 13 101 to 150 MBGL (300mm. Dia) 14 Tube well Assembly 15 MS tubewell assembly with all required parts like plane pipe, slotted pipe (as required up to 50% of plane pioe) rings, wall cap ball plug, clamp, reducer, Central Guide, Support structure etc. as required & as per typed design Complete in all respect- 300 mm dia. 16 Development of tube well by air compressor (250PSI) 17 Transportation, Installation, Dismantling of 250/350/600 PSI Compressor 18 Charges for Development by 250 PSI Compressor per hour 19 Development of tube well by O.P Unit 20 Transportation, erection, dismentlling of 1 Cuses/3 Cuses OP Unitand Yield test. 21 Charge of development by 3 cusec O.P Unit Yalid Test 22 Electrical well logging 23 Pea- gravel 24 Supply of lal kuan pea gravel size of 1.6mm to 4.8mm which is to be used during lowering or tubewell assembly and development of tubewell 25 Yield test, chemical test & site development 26 Chemical test of water 27 S.I.T.C of Submersible Pump Setwith 24 meter coloum pipe, NRV, CI D/F bend 90 degree , CL A/F tee, D/F pipe (1.5M long 02 Nos and 1.0 m Long 01 No), Earthing, Painting, Toolset , 12 Stablizer, wiring of Pump house internal and external,chainpully block and all puming plant accessories with nut bolts and rubber packing etc. ( All other items for pumping plant items not includes in SCADA automation pumping plant items) 28 Additional column pipe in 3m length 29 GAUGES 30 Prassure Guage 31 Depth Guage 32 Pump 33 SPECIAL TOOLS AND SPANNERS IN A TOOL KIT 34 Pipe wrenches 35 D/E spanner 22/6mm 36 Adjustable wrench 300mm 37 Screw Driver 38 300MM 39 150MM 40 Combination pliers 200mm 41 Noise pliler 150mm 42 Hammer with handle 1kg 43 Line tester (Tapariya Make) 44 LIFTING TACKLES (REPUTED MAKE) 45 Electrification of pumphouse (internal & external) 46 Cover 47 Motor inspection fees 48 INSTALLATION AND EARTHING 49 Installation of pumping plant and along with all nessuary fitting including bypass and delivery arrangement, airline and gauges fittingnetc. Complete in all respect with supply & burying of 600 mm x 600mm x 6mm G.I plate vertically for dauble earthing with its top at lease 3m Below ground level complete with 40mm dia G I pipe and funnel for watering and one earthing load of 25 mm x 3mm GI strip in L.S. 32mm dia . GI pipe upto switch bold 30 Sq. Cm. CI frame with hinges cover masonry and salt at least 200mm thick all a ground etc. complete in all respect as per ISS and Indian electricty 50 Commissioning & testing of pumping plant 51 One month watch & during the period of Installation 52 Power connection of UPPCL 53 Processing fees for 19 KW 54 Energy meter upto 20 KW 55 Security Charges @ 4000.00 for LMV7 56 11KV HT line with Accessories Material Per Km for 100 KVA 57 Distribution Transformer 11KV/4Kw with double pole substation for 25 KVA 58 Civil Work 59 Construction of room 3.60x3.60 Size. Outer size
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Uttar Pradesh View Result →
14.
Housing Urban and Rular Development #10562771 Price Bid
Providing Water Automation System Including Upgradation Of Existing Pump House At Sawan Park.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Delhi View Result →
15.
Drinking Water Supply and Sanitation #10546075 Price Bid
supply installation testing and commissioning ofOf Starters For Operation Of Various Electric Motors At Old Intake Raw Water Pump House.. (Re- Invite) , Sitc Of300 Hp Auto Transformer Starter For Set No.5 & 12 For Operation Of Induction Motor At Old Intake Raw Water Pump House I/C Following Woks :- S/O Smart Automatic Oil Immersed 300 Hp Ats Starter I/Cshort Circuit Protection, Single Phasing Or Phase Loss , Phase Reversal And Phase Unbalance Fault Protection ,Voltage & Current Based Protection With Individual Fault Protection Enable/ Disable Feature, Cabletransformer Will Be Of Copper Wound Heavy Duty In 50%, 65%, 80% Tapping Suitable For Approx. 300-330 Kw Starting Current. Other Components I.E., Contactors, Mccb, Relays , Protectionrelays, Metering Section Will Be As Suitable For 300 Hp. Capacity. Make : Bentex , S/O Transformer Oil. Make : Savita/ Poweroil , Dismantling Of Old Starters, Installation Fixing & Automation Of Starter With All Electrical And Mechanical Connection With Proper Thumbling Tapping Of Cable End Connection If Existing Cable With Required Civil Works. , Loading, Unloading By Heavy Manual Labouri/C Transportation Charges. , Testing & Commissioning Of The Auto Transformer Starter With Relevant Is. Testing Of The Starter Prior To Switching On As Follow (I) Continuityand Earth Testing (Ii) Meggering Of All Equipments For Phase To Phase,Neutral To Body , Neutral To Earth, And Phase To Earth. (Iii) Checking For All Tightness Of Nut And Bolts (Iv) Alignments Of Doors Etc (V) All Functional Tests/Setting Of Protection Parameters
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Delhi View Result →
16.
Drinking Water Supply and Sanitation #10523073 Price Bid
Tender For Interception & Diversion (I&D) & Stp For Existing Drain In Dhampur Town/Npp, Distt Bijnor - Civil Works of 7.2 MLD STP and 7 KLD Septage Co-Treatment Facilities 2 Design, Construction, Supply of all materials, Erection and Commissioning of 7.2 MLD STP and 7 KLD Septage Co-Treatment Facilities with all the civil,LT/HT panel room, sub station building, DG set foundation, admin buidling, laboratories, meter room and campus development [Construction of Internal Road (CC Road, 3.6m wide, area approx 2000sqm),fiiling of earth if required]fully furnished administrative building having fully functional testing laboratory, PLC/SCADA Rooms, Power Generation building, Blower building, sludge handling system & other building required for technology proposed. OCEMS system at inlet & outlet of STP and master control station (MCS) at STP. Conference room suitable for 15 people, 4 rooms with a attached toilet for supervisory staff and a toilet block, drinking water cooler, all office rooms and conference room (Air Conditioned)., staff quarters as per requirement and specification, external water supply (20KL tank including tube well and pumping arrangement,sanitation work) etc. all complete for STP with co-treatment facilities. STP shall be based on SBR Technology OR any proven technology. The effluent quality for agricultural uses (PH-6.5 TO 8.3, SS-30 mg/l, Oil&Grease-10 mg/l, BOD-10mg/l) , COD-30 mg/l , Residual chlorine-nil , TKN-10mg/l, Nitrate N-10 mg/l, F.C.-230 MPN/100 ml, Dissolved P-5 mg/l (preferable 2 mg/l). ) shall be maintained asper CPHEEO manuals. Latest NGT norms for effluent discharge shall be adhered. The cost is inclusive of (Peak flow 24.11 MLD) (civil works). 3 INTERCEPTOR SEWERExcavation below G.L. upto depth as specified for laying sewer and manhole ordinary soil (earth, sand, loam and clay) including cutting of joints pits ramming dressing) leveling, refilling of trenches in 20 cm layer watering and ramming the same including (8% reduction due to excavation already taken in manhole and SCC) 4 (a)0.00 to 1.50 m 5 (b) 01.50 to 03.00 m 6 (c) 03.00 to 04.50 m 7 Provide and fix close timbering in trenches for the depth as specified below G.L. consisting of 40 mm thick approved country wood plank for polling board 125 x 75 mm eucalyptus-Safeda-Sal Wood wallers and 100 mm dia ballies for shuttering at 1.5 m C/C including all labour etc , complete 8 (a)1.5 to 3 m 9 (b) 03.00 to 06.00 m 10 Same as item No. 3 but for open timbering (No timbering for depth <1.50m) 11 (a) 1.50 to 03.00 m 12 Timbering left in trenches (No timbering for depth <1.50m) 13 Open Timbering left in trenches (used timbering) 0-3m depth 14 Closed Timbering left in trenches(used timbering)0-3m depth 15 Closed Timbering left in trenches(used timbering)3-6m depth 16 Supply of following sizes of RCC spigotted and socketed non pressure pipes( Dia. In mm ) with structural strength as per IS 458 : 2003 and its latest amendment(s).NP3 17 600 mm dia 18 700 mm dia 19 Carting following sizes of R.C.C. Hume pipe NP3 Class Socket / spigot rubber ring jointing and specials from store to the work lowering and laying the same in to the trenches upto depth as specified below G.L. true to alignment600 mm dia pipe 20 01.50 - 0 3.00 m 21 03.00 - 04.50 m 22 700 mm dia pipe 23 01.50 - 0 3.00 m 24 Cement concrete work in bedding below G.L. at specified depth with cement, coarse sand and 20 mm gauge approved stone ballast (1:2:4) including supply of all materials, labour, T&P etc. required for the proper completion of work. 25 (c) 03.00 to 04.50 m 26 Filling granular material (well graded crushed rock or gravel maximum size 20mm) into the trenches for class B bedding (granular bedding) including watering compaction, labour T&P etc. for completion of work. 27 (b) 01.50 to 03.00 m 28 Supply (excluding cartage) of granular material (well graded crushed rock or gravel of maximum size 20mm)for class B bedding (granular bedding) 29 Construction of circular type brick masonry HD (HD25) manhole (with Extra Heavy Duty type manhole cover) with top slab made of cement concrete 1:1.5:3 with graded granite stone aggregate (12 mm nominal size), wall made of brick masonry using 1st class bricks having crushing strength between 100 to 149 kg/cm² in cement mortar 1:4 inside plastering 12 mm thick 1:4 finished smooth with neat cement, pinning, outside plaster 1:4 and making channels with cement concrete 1:2:4 graded granite stone aggregate (12 mm nominal size) complete with including Plastic Encapsulated M.S. foot Rest staggered at 0.375 mtr interval, including excavation, reinforcement. 30 1200mm internal dia., 3.30m deep 31 1500mm internal dia., 4.95m deep 32 Extra for every additional depth of 1 m or part there of in following size of circular manholes. 33 1200mm internal dia., 3.30m deep 34 1500mm internal dia., 4.95m deep 35 Dismantling/Cutting of Cement Concrete road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materialsas per direction of Engineer Incharge. 36 Reinstatement of Concrete road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials as per direction of Engineer Incharge. 37 Providing and erecting temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes hiring of Ballies and arrangement for traffic diversion such as traffic signals during construction at site as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). The rate is for unit length of pipe laying. 38 Disposal of Surplus Earth as per direction of Engineer Incharge. 39 Construction of Boundary Wall 2.0m ht. above plinth level 0.23m width with RCC Column @3m c/c with plinth beam and foundation avg. 2 m depth including reinforcement and RCC coping on top of wall with plaster (1:4) and painting (apex painting 3 coat) as per type design and drawing at the STP site 40 MS gate (3.6m wide with 1.50m wicket gate with 0.35 m x0.35m RCC piller) 41 Cnstruction of Intermediate Pumping Station (IPS) as per specification, accesory building & design approved by Engineer in Charge 42 Sewage Rising main from IPS Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as per direction of Engineer Incharge. 43 0.0 to 1.5 mtr. Depth (do - in all kindes of soil) 44 Supply of 400mm dia. DI K9 pipe and special for the pumping mains including all complete pipes conforming to IS : 8329- 400 mm 45 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc.(400mm) 46 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete 150 mm 47 Carting of 400mm dia DI K9 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc. 48 Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, withcast insitu RCCslab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing 49 Sluice valve, Air valve chambers 50 Dismantling/cutting of the BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 51 Reinstatement of the BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 52 Interception and diversion (I&D) Structure works 53 Cnstruction of Interception and Diversion Structure works as per specification, accesory building & design approved by Engineer in Charge 54 Treated Effluent line (400mm Dia DI K7) (STP to Disposal point (Khow river) 55 Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 m.0.0 to 1.5 mtr. Depth do - in all kindes of soil 56 Supply of 400mm dia. DI K7 pipe and special for the pumping mains including all complete Pipes conforming to IS : 8329- 400 mm 57 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc.all complete required for completion of work (400mm dia) 58 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. all complete required for completion of work150 mm 59 Carting of 400mm dia DI K7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc. 60 Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, withcast insitu RCCslab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing. 61 Sluice valve, Air valve chambers 62 Dismantling/cutting of BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 63 Reinstatement of BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 64 E/M WORKS 65 STP ( 7.2 MLD ) And Co Treat ment Plant ( 7 KLD ) 66 A. Design, Supply of all Materials, Erection, Testing,Commissioning and 3 month trial run Of Electrical, Mechanical & Instrumentation Equipments at STP (7.2 MLD )with all required electrical& mechanical works, PLC/SCADA work, electrification & street lighting work and Online Continuous Effluent Monitoring System (OCEMS) etc. all complete as per tender documentfor STP.The effluent quality for agricultural uses ( PH-6.5 TO 8.3,SS-30 mg/l, Oil & Greases -10mg/l, BOD- 10mg/l,COD-30 mg/l,Residual Chlorine-nil, TKN-10mg/l, Nitrate-10mg/l, FC-230MPN/100ml Dissolved P-5mg/l (preferable 2mg/l).) shall be maintained as per CPHEEO mannuals Latest NGT norms for effluent discharge shall be adhered. The rate is Considered for SBR Technology. The STP shall be capable to treat the raw sewage having minimum concentrationmentiond in CPHEEO mannual. Firm has to complete Design, Supply, Erection, Testing,Commissioning and 3 month trial run of Substation Work like HT Panel, Transformer & its associated equipments and DG Set Work with AMF Panelwith considering load of STP and MPS both.B. Design, Supply of all Materials, Erection and Commissioning and 3 month Trial Run of Co-Treatment Plant ( 7 KLD ) having manual screen with-SS 304 with bar size (50 mm x 10mm) and gaping 20 mm, Screw Pumps (2 Kl/h 1W+1S), Screw Press Machine (3 KL/H) with double cylinder having VFD for its operation , 1000 Lit. PVC tank for washing screw press machine. all type pipe and fittings, LT panel and cabling material,Dewatering Pumps (1W+ 1S), 2HP Blower with 6 Nos Diffusers etc complete. including Supply and 3 month trial run of 1 No. 1500 Lit. Cesspool Vehicle having 30 HP Reputed make Tractor (with Registration Certificate and insurance papers) 67 E./M. Works at MPS 68 Electrical Works 69 H.T.Panel( Comprising with 1 -I/C and 2 -O/G. (panels should be TYPE TESTED ASSEMBLY ( TTA) type only) 70 SITC of Indoor Type Floor mounted HT Panel with11 KV, 630/800 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details- 71 Supply installation testing and commissioning of Incoming Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturers own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. (1set, included in STP costing) 72 Supply Installation Testing and Commissioning Outgoing Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimalfailure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturers own make) having protectionsof 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) (2 sets, included in STP costing) 73 Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. (included in STP costing)3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) -60 metersTrench making and covering of trench in all respect.- 60 metersSITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) - 4 sets11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break Down Voltage 45 KV - 2.5 SqmTransformer:Suitable capacitywith Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer of suitable capacity rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. (included in STP costing) -- 2 Nos. 74 L.T. Panel (panels should be TYPE TESTED ASSEMBLY ( TTA) type only)SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operatedon 415 ± 6 %volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming ACB panels and 1 outgoing ACB panel, each consisting of following items -(i) 4 pole Microprocessor based release Draw out type ACB (Motorised charging type) ,630 A Rating ,50 kA- 1 No.(ii)C.Ts of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v)Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi)Frequency meter-1 No.(vii)KWH meter - 1 No. (viii)2 Pole over current relay& one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 6 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 63 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 3 Nos. outgoing panels for miscellaneousworks, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F) 4 pole Microprocessor based release Draw out type (Motorised charging type) ,630 A Rating ,50 kA Panel for DG sets incoming - 1 NO (G) Bus coupler arrangement in panels 75 LT Cable laying and jointing 76 Power and control cable-Supply of 185 sq. mm 3.5 core cable - 2 Run required for power fromeach Transformer to each L.T. panel , 50 sq. mm X3 core-1 run cable for power from starters to Motor including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation systemetc. complete in all respect. 77 Earthing 78 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. 79 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. 80 Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) 81 Charges of Electrical safety Clearance 82 Expenditure on B&L Form, Challan etc. 83 Proper fencing of substation portion as per I.E. rules. (Ref. Ongoing AMRUT Work Aligarh Sewarage) 84 STARTER PANEL 85 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 20 HP motor (To be fixed in composite panel of LT Panel) 86 Mechanical Works 87 PumpThesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 20 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (4W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 3110 lpmTotal Head= 16 M or as per designSpeed=980Quantity of pumps. 88 Guid Rail System 89 Guide rail system (Automatic coupling system) for 20 HP submersible pump setscomplete for above pump set.(6 Sets, included in item no. 51.01) 90 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (6 Sets, included in item no. 51.01) 91 Main piping and Valves.Main piping and valves 200 mm dia delivery, 350 mm diacommon header line. 92 Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable water 93 Material of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MS 94 Motor Operated Sluice Valves 95 Sluice Valve 200 mm dia 96 Sluice Valve 350 mm dia 97 Reflux Valve 98 Reflux valve 200 mm dia N.B. 99 PipingsNote : Regarding the size of pipes, Tee, Bend etc, contrctor is required to designed them self and may got it approved by the department before execution of works along with layout drawing taking 200mm pipe 60m and 350 mm pipe 15m . 100 200 mm, K9 delivery pipes for all six pumping plant 101 350 mm, K9 common header pipes 102 Specials like bend, tee, D Joint etc. 103 Nut Bolt, Washer Rubber packing etc 104 INSTALLATION, TESTING & COMMISSIONING 105 Installation & Commissioning of all 6 Nos. Pump set,Piping & Valves as mentioned in above. 106 Level Transmitter (For Hi-Lo cut-off & alarms) 107 SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. 108 Electro magnetic flow meter 109 SITC of CE/UL certified Electro magnetic flow metersuitable to measure 0 to 30 MLD flow to be fitted in 350 mm dia main header line. 110 E.O.T. Crane 111 SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. 112 Chequerred plate and guards 113 SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. 114 PAINTING 115 Painting of all pumps piping and valves with two coat enamel paint. 116 LIGHT WIRING & Electrification (Ref. UP Jal Nigam E&M SOR, 2019) 117 Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan 118 Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan 119 IPS Campus with Solar Panel and LED Light of 3 sets. 120 D.G. SET AND ACCESSORIES 121 SITC of Radiator Cooled and Turbo charged Silent type suitable capacity DG set , engine ,alternator capable of developingat 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. (1 set, included in stp costing) 122 SITC of PLC Based Auto main failure (AMF) Panel forDG Set fabricated from CRCA sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, operator interface panel complete in all respect.(1 Set, included in stp costing) 123 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required.(2 Job, included in stp costing) 124 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. (2 Jobincluded in stp costing) 125 Supply & Laying 50 mm X 6mm sizeGI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. (1 Job, included in stp costing) 126 Providing and Laying cable for DG Set to Panel ( armored aluminium )-(1 Job, included in stp costing) 127 Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 185 sq mm. (4 Jobs, included in stp costing) 128 SCREENS AND GATES: 129 Rising type thimble mounted CI Sluice Gates of reputed make at IPS 130 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at mid year peak discharge (1w+ 1s) 131 Packing and Frieght 132 Installation, Testing and Commissioning 133 AUTOMATION OF MPS 134 CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. 135 GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 136 CE/UL certified intellignet Smart Energy Meter 137 Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1) 138 160 AMP rating 139 Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. 140 CE/UL Certified Surge protector for control panel. 141 CE/UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters. 142 Security Survillance IP Camera with recorder 143 Installation, commissiong & testing of above automation work 144 Expenditure on Operation & Maintenance of MPS including automation, Diesel Consumption & Electricity Consuption During 3 month Trial and Run Period 145 E./M. Works at IPS Dhampur 146 Electrical Works 147 H.T.Panel( Comprising with 1 -I/C and 2 -O/G .(panels should be TYPE TESTED ASSEMBLY ( TTA) type only)SITC of Indoor Type Floor mounted HT Panel with11 KV, 630/800 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details- 148 Supply installation testing and commissioning of Incoming Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturers own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. 149 Supply Installation Testing and Commissioning Outgoing Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimalfailure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturers own make) having protectionsof 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) 150 Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. 151 3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) 152 SITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) 153 11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break DownVoltage 45 KV 154 Transformer: 315 KVA with Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer of 315 KVA rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. 155 L.T. Panel (panels should be TYPE TESTED ASSEMBLY ( TTA) type only) 156 SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operatedon 415 ± 6 %volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming ACB panels and 1 No outgoing ACB panel, each consisting of following items -(i) 4 pole Microprocessor based release Draw out type ACB (Motorised charging type) ,630 A Rating ,50 kA- 1 No.(ii)C.Ts of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v)Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi)Frequency meter-1 No.(vii)KWH meter - 1 No. (viii)2 Pole over current relay & one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 3 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 400 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 2 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 100 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (E) 3 Nos. outgoing panels for miscellaneousworks, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (F)APFC Panel for total load.(G) 4 pole Microprocessor based release Draw out type (Motorised charging type) ,630 A Rating ,50 kA Panel for DG sets incoming - 1 NO (G) Bus coupler arrangement in panels 157 LT Cable laying and jointing 158 Power and control cable-Supply of 240 sq. mm 3.5 core cable - 2 Run required for power fromeach Transformer to each L.T. panel , 240 sq. mm X3 core-1 run cable for power from starters to 67 KW Motors & 35 sq. mm X3 core-1 run cable for power from starters to 15 KW Motors including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation systemetc. complete in all respect. 159 Earthing 160 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. 161 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. 162 Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) 163 Charges of Electrical safety Clearance 164 Expenditure on B&L Form, Challan etc. 165 Proper fencing of substation portion as per I.E. rules. (Ref. Ongoing AMRUT Work Aligarh Sewarage) 166 STARTER PANEL 167 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 90 HP motor (To be fixed in composite panel of LT Panel) 168 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 20 HP motor (To be fixed in composite panel of LT Panel) 169 Mechanical Works 170 Large PumpsThesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 90 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (2W+1S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 5750 lpmTotal Head= 40 M or as per designSpeed=980Quantity of pumps. 171 Guid Rail System 172 Guide rail system (Automatic coupling system) for 90 HP submersible pump setscomplete for above pump set.(3 Sets, included in item no. 94.01) 173 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (3 Sets, included in item no. 94.01) 174 Small Pumps 175 Thesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 20 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (1W+1S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump=2500 lpmTotal Head= 17 MSpeed=980Quantity of pumps. 176 Guid Rail System 177 Guide rail system (Automatic coupling system) for 20 HP submersible pump setscomplete for above pump set. (2 Sets, included in item no. 98.01) 178 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (2 Sets, included in item no.98.01) 179 Main piping and Valves. 180 200 mm dia delivery for small pumps and250 mm dia delivery for large pumps, 350 mm diacommon header line. 181 Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable water 182 Material of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MS 183 Motor Operated Sluice Valves 184 Sluice Valve 200 mm dia 185 Sluice Valve 250 mm dia 186 Sluice Valve 350 mm dia 187 Reflux Valve 188 Reflux valve 200 mm dia N.B. 189 Reflux valve 250 mm dia N.B. 190 PipingsNote : Regarding the size of pipes, Tee, Bend etc, contrctor is required to designed them self and may got it approved by the department before execution of works along with layout drawing . 191 200 mm, K9 delivery pipes for small pumping plants 192 250 mm, K9 delivery pipes for large pumping plants 193 350 mm, K9 common header pipes 194 Specials like bend, tee, D Joint etc. 195 Nut Bolt, Washer Rubber packing etc 196 INSTALLATION, TESTING & COMMISSIONING 197 Installation & Commissioning of allPump set,Piping & Valves as mentioned in above @5% of supplied items. 198 Level Transmitter (For Hi-Lo cut-off & alarms) 199 SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. 200 Electro magnetic flow meter 201 SITC of CE/UL certified Electro magnetic flow metersuitable to measure 0 to 30 MLD flow to be fitted in 350 mm dia main header line. 202 E.O.T. Crane 203 SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. 204 Chequerred plate and guards 205 SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition(3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. 206 PAINTING 207 Painting of all pumps piping and valves with two coat enamel paint. 208 LIGHT WIRING & Electrification (Ref. UP Jal Nigam E&M SOR, 2019) 209 Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan 210 Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan 211 IPS Campus with Solar Panel and LED Light of 3 sets. 212 D.G. SET AND ACCESSORIES 213 SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing 250 kVA at 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. 214 SITC of PLC Based Auto main failure (AMF) Panel for 250 KVA DG Set fabricated from CRCA sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, operator interface panel complete in all respect. 215 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. 216 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. 217 Supply & Laying 50 mm X 6mm sizeGI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. 218 Providing and Laying cable for DG Set to Panel 240 sq mm X 3.5 core x 2 run( armored aluminium ). 219 Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 240 sq mm. 220 SCREENS AND GATES: 221 Rising type thimble mounted CI Sluice Gates of reputed make at IPS 222 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at peak load of full discharge (working) 223 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at peak load of full discharge( standby) 224 Packing and Frieght 225 Installation, Testing and Commissioning 226 AUTOMATION OF IPS 227 CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. 228 GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 229 CE/UL certified intellignet Smart Energy Meter 230 Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1) 231 160 AMP rating 232 Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. 233 CE/UL Certified Surge protector for control panel. 234 CE/UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 235 Security Survillance IP Camera with recorder 236 Installation, commissiong & testing of above automation work 237 3 month trial run of automation work 238 Expenditure on Operation & Maintenance of IPS during 3 month Trial and Run Period 239 Expenditure onDiesel Consumption of IPS during 3 month Trial and Run Period 240 Expenditure on Electricity Consuption of STP, MPS & IPS as per actual UPPCL bill during 3 month Trial and Run Period
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Uttar Pradesh View Result →
17.
Drinking Water Supply and Sanitation #10489962 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Harat Water Supply Scheme, T.W. No. I & Ii, Block: Haripal, District - Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 500 Lpmhead : 65 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
18.
Drinking Water Supply and Sanitation #10489957 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Hasnan Water Supply Scheme, T.W. No. I & Ii, Block: Polba-Dadpur, District Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 511 Lpmhead : 75 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I15-25 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
19.
Drinking Water Supply and Sanitation #10489951 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Lokabati Water Supply Scheme, T.W. No. I & Ii, Block: Dhaniakhali, District - Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 470 Lpmhead : 78 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I15-25 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 30 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
20.
Drinking Water Supply and Sanitation #10489945 AOC
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Naita Water Supply Scheme, T.W. No. I & Ii, Block: Tarakeswar, District - Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 500 Lpmhead : 65 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Dec 30, 2022 Contract Value : ₹ 21.49 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
21.
Drinking Water Supply and Sanitation #10489939 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Natibpur Water Supply Scheme, T.W. No. I & Ii, Block: Khanakul-Ii, District - Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 625 Lpmhead : 60 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
22.
Drinking Water Supply and Sanitation #10489927 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Patul Water Supply Scheme, T.W. No. I & Ii, Block: Polba-Dadpur, District - Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 284 Lpmhead : 78 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 20 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
23.
Drinking Water Supply and Sanitation #10489917 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Rudrani Water Supply Scheme, T.W. No. I & Ii, Block: Dhaniakhali, District - Hooghly Under Electrical Division, Phe Dte-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 354 Lpmhead : 76 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
24.
Drinking Water Supply and Sanitation #10489911 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Atisara Water Supply Scheme, T.W. No. I & Ii, Block: Singur, District - Hooghly Under Electrical Division, Phe Dte.- 1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 700 Lpmhead : 65 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 6 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I15-25 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 30 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
25.
Drinking Water Supply and Sanitation #10489906 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Badinan Water Supply Scheme, T.W. No. Iii, Block: Polba-Dadpur, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 667 Lpmhead : 50 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star, Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
26.
Drinking Water Supply and Sanitation #10489902 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Bandhpur Water Supply Scheme, T.W. No.- I & Ii, Block: Chanditala-I, District- Hooghly Under Electrical Division, Phe Dte-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 563.04 Lpmhead : 54 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
27.
Drinking Water Supply and Sanitation #10489898 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Bandipur Water Supply Scheme, T.W. No. Vi, Block: Haripal, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 667 Lpmhead : 56 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - Ii15-25 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
28.
Drinking Water Supply and Sanitation #10489893 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Basubati Water Supply Scheme, T.W. No.- I & Ii, Block: Singur, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 700 Lpmhead : 65 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 6 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I15-25 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 30 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
29.
Drinking Water Supply and Sanitation #10489889 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Bishnupur Water Supply Scheme, T.W. No.- I & Ii, Block: Dhaniakhali, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 836 Lpmhead : 57 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 6 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I15-25 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 30 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
30.
Drinking Water Supply and Sanitation #10489884 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Bishnupur Water Supply Scheme, T.W. No.- I & Ii, Block: Jangipara, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 283 Lpmhead : 58 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 20 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
31.
Drinking Water Supply and Sanitation #10489862 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Kanajoli Water Supply Scheme, T.W. No.- I & Ii, Block: Dhaniakhali, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 344 Lpmhead : 56 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 20 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
32.
Drinking Water Supply and Sanitation #10489858 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Kelepara Water Supply Scheme, T.W. No.- I & Ii, Block: Pursura, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 348 Lpmhead : 61 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 20 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
33.
Drinking Water Supply and Sanitation #10489848 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Khajurdaha Water Supply Scheme, T.W. No.- I & Ii, Block: Dhaniakhali, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 474 Lpmhead : 54 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 20 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
34.
Drinking Water Supply and Sanitation #10489843 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Kuchpala Water Supply Scheme, T.W. No.- I & Ii, Block: Polba-Dadpur, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 340 Lpmhead : 75 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
35.
Drinking Water Supply and Sanitation #10489839 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Kulihanda Water Supply Scheme, T.W. No.- V, Block: Chinsurah Mogra, District- Hooghly Under Electrical Division, Phe Dte-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 667 Lpmhead : 56 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - Ii15-25 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
36.
Drinking Water Supply and Sanitation #10489834 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Nababpur Water Supply Scheme, T.W. No.- I & Ii, Block: Chanditala-I, District- Hooghly Under Electrical Division, Phe Dte.- 1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 557.34 Lpmhead : 58 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
37.
Drinking Water Supply and Sanitation #10489830 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Purushottampur Water Supply Scheme, T.W. No.- I & Ii, Block: Singur, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 500 Lpmhead : 66 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
38.
Drinking Water Supply and Sanitation #10489824 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Routhkhana Water Supply Scheme, T.W. No.- I & Ii, Block: Khanakul-Ii, District- Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 531 Lpmhead : 60 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
39.
Drinking Water Supply and Sanitation #10489819 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Chalua Water Supply Scheme, T.W. No. I & Ii, Block: Dhaniakhali, District - Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 591 Lpmhead : 80 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I15-25 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 30 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
40.
Drinking Water Supply and Sanitation #10489814 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Chautara Water Supply Scheme, T.W. No. I & Ii, Block: Dhaniakhali, District - Hooghly Under Electrical Division, Phe Dte.- Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 268 Lpmhead : 79 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 20 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
41.
Drinking Water Supply and Sanitation #10489809 Price Bid
Supply, Delivery & Installation Of Submersible Pumping Machinery And Other Electrical / Mechanical Equipments Etc. Including Allied Works For Gurbari Water Supply Scheme, T.W. No. I & Ii, Block: Dhaniakhali District - Hooghly Under Electrical Division, Phe Dte.-1 Part-A Supply And Delivery At Site Submersible Pumping Machinery Directly Coupled With Wet Winding Type Submersible Motor Having The Following Specification Pump.Duty Condition : 395 Lpmhead : 80 Mtr.Motor : Submersible Type 3 Ph. 50 Hz. 400V + 10%, Star Deltaimpeller : Gm / Ss / Cromesteelmotor Winding : Wet Type.Pump Outlet - 65 / 75 / 100 Mm.Suitable For Size Of Tubewell : 250 Mm X 150 Mm.Make : Ksb / Texmo / Pluga / Bg. ( Test Certificate, Warranty Certificate Along With Characteristic Curve Should Be Submitted At The Time Of Delivery. ) 2 Supply And Delivery At Site The Following:-Upvc 80 Mm Dia Column Pipewith Both Side Square Threaded ( 8 Tpi ) With One Socket And O Ring Biax Technology With Wiring Lock System Non Corrosive, High Tensile Having Iso 9001 Standard. ( Make- Ashirbad / Oriplast ) 3 I ) 3 Mtr. Long. 4 Ii ) 1.5 Mtr. Long 5 Iii ) 80 Mm Dia Top & Bottom Adaptor 6 100 Mm X 80 Mm Dia Gi Reducer 7 Supply And Delivery At Site Heavy Type Suitable Dia M.S. Suspension Clamp For Above Column Pipe Along With Nuts, Bolts And Washers Etc. 8 Supply And Delivery At Site 80 Mm. Dia Cidf Sluice Valve- 1 No., 80Mm Non Return Valve ( Swing Type - 1 No. ) Pn - 1.0, 80Mm Ms Heavy Flange - 1 No., Cidf Bend 90O - 1 No., Cidf / Ms ( Heavy ) Short Piece As Required Length, 80Mm Cidf Tee - 1 No., Reducer, Nut Bolt And Other Ci / Ms Specials Etc. As Required As Per I.S. Specification And Other Required Materials For The Job I.E. For Making Complete Construction Of Delivery And Wash Out Line ( Make Valve : I.V.I / I.V.C / Kirloskar / Upadhya / Jupitor Engg. Co. / Sigma Flow Control India Ltd. / Cair Euromatic Automation Pvt. Ltd. / K.E Of Magnet Brand ) As Per Relavant I.S. ( Test Certificate For Valve Should Be Submitted At The Time Of Delivery ) . 9 Supply And Delivery At Site Split Type M.S. Fabricated Suitable Tubewell Cover For The Tubewell Housing With Necessary Clamping Arrangement Including Holes For Column Pipe, Air Pipe And Cable Entry Etc. 10 Supply And Delivery At Site Depth Gauge ( Make : H. Guru ) 102 Mm Dia. With Steel Airbreak Pipe Required Length With All Other Fittings And Accessories For The Work Including Supplying On The Good Quality Hand Pump Of Approve Make 11 Supply And Delivery At Site Pressure Gauge 102 Mm. Dia And 7 Kg. / Cm2 Range, Brass Cocks And Fitting Complete ( H.Guru ) 12 Supply And Delivery At Site 4 Sq. Mm. 3 Core Copper 1.1 Kv Grade Pvc Insulated Water Proof Flat Submersible Cable. ( Make : Finolex / Netco / Mescab / Crystal ) 13 Making Safety Device For Above Pump By Supplying 3 Nos. Suitable Size Ms Clamp / Ms Cage And 1 Dia Nylon Rope Of Required Length Including Supplying Nuts, Bolts, And Other Materials As Per Direction. 14 Supply & Delivery Of Double Flanged Three Phase 50 Hz Quarter Turn Electrical Actuator [ Gear Case Lubrication : Sp68 Is:13095, Torch Switches: 2 X 1 No / 1 Nc Changeover Contact, Positional Limit Switches: 2 X 1 No / 1 Nc Changeover Contacts ] Operated Flange Type Butterfly Valve ( Pn - 1.0 ) 80 Mm. Dia With Mechanical Position Indicator, Ci Body & Disk - Is: 210 Gr. Fg 260, Shaft Of Stainless Steel Aisi 410 As Per Bs 5155 Ip - 68 / S-2, Actuator Make - Rotork / Limitorque / Anlna. Valve Make - Ivi / Ivc / Kirloskar / Jupiter Engg. Co. / Andco ) . ( Test Certificate Should Be Submitted At The Time Of Delivery ) 15 Supply & Delivery Of 415 V Mcc Cum Pdb. With Minimum 2Mm Thickness And Degree Of Protection Ip - 54, Conforming To Is-8623 Withsuitable Bus Bar, Digital Voltmeter Ammeter, Contactor, Delay Timer, Mcb, Valve Actuator Starter Etc. With Plc Logic & Ups As Detailed In Annexure - I7.5-15 Hp With Sds ( Star Delta Starter ) Panel Make : Digitek / Rnr Industries / Pce Projects / Opg Power System / Ecs. [ Tc / Gc To Be Submitted Along With Panel After Approval Of Detail Power And Control Circuit Drawing By Eic ] . 16 Supply & Delivery Of 35 Sq. Mm. 3 1 / 2 Core Pvc Insulatedal. Armoured Cable ( 1.1 Kv Grade ) , Is 1554 ( Part - I ) / Is 7098 ( Part-I ) Make : Incab / Gloster / Nicco / Polycab / Crystal. 17 Supply & Delivery Of 100 Amp. 440 V, 50 Hz. Tpn Main Switch With Rewireable Type Fuse Link ( Make: Havells / Standard ) 18 Supply & Delivery Of 100 Amp. Industrial Copper Busbar ( Make Havells / Siemens ) 19 Supply & Delivery Of 4 Pole 100 Amp Changeover Unit ( Make- Havells / Standard / Abb ) 20 Supply & Delivery Of 100 Amp 4 Pole Mccb With Adjustable Overload And Adjacent Short Circuit Protection Including Enclosures. ( Make- Siemens [ Model No. 3Vt ] / Havells / Abb ) 21 Supply & Delivery At Site Of 25 Kva, 3 Phase Oil Cooled Type Servo Motor Operated Wound Line Voltage Corrector Conforming To Is-9815 [ Pt-I ] 1994 Suitable For Unbalanced Input Voltage.Input Voltage: 3 Phase Main Supply Phase To Phase 250V-500V 3 Servo Motor In 3 Phase With All Protection By Mcb ( Make- Abb / Siemens / L&T ) Output Voltage: 3 Phase Balanced Output Phase To Phase 415V + 1% [ Make - Fiji / Digitek / Automatic Electric Ltd / Andrew & Glue / Sen & Pandit / Ecs / Any Approved Make ] . ( Test Certificate & Warranty Certificate Should Be Submitted At The Time Of Delivery ) 22 Supply And Delivery Of Automatic Plunger Type Chlorinator For Feeding Accurately Automatic Controlled Dosage Of Chlorine Solution Into The Water By Connecting Metering Pump With Flow Rate Of Water 0-100 Ltr / Hr. With Maximum Pressure Of 10 Kg. / Cm2 Suitable Dosing Pump And Other Necessary Accessories On The Delivery Pipe Line As Required. The Pump Shall Be Coupled With 1 / 2 Hp Motor Having 3 Phase Power And 1440 Rpm ( +4% ) .Pump Make - Swelore / Positive. Motor Make - Crompton Greaves / Kirloskar / Abb / Any Approved. ( Test Certificate Will Be Submitted At The Time Of Delivery ) 23 Part-Binstallation Of Pumping Machinery With Valves, Pipe & Pipe Specials, Sort Piece, Presurre Gauge Including Hoisting Of Column Pipe Making All Electrical And Water Line Interconnection Complete As Per Direction Including Supply Of Necessary Materials As Required For The Work. 24 Making Of Tubewell Foundation ( Size- 3X 3X 3.5 Approx ) As Per Site Situation Including Supply Of Necessary Materials As Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing To Complete As Per Direction. 25 Installtion Of Panel & Actuator Operated Ci Butterfly Valvewith Supply Of 12 Core 2.5 Sq. Mm. Copper Control Cable, Compensating Ms Flange, Nuts, Bolts Gasket And Other Fixing Materials As Required To Complete The Job Including Necessary Making Of Brick Pillar As Per Site Situation With Supply Of Necessary Materials Like Bricks, Sand, Cement, Stone Chips Etc. With Plastering & Neat Cement Finishing In All Respect Including Successfull Operation Along With Testing Of The Whole Installation As Per Entire Satisfaction Of Eic. 26 Installation With Testing And Commissioning Of The Voltage Stabilizer With Necessary Foundation Along With Necessary Accessories In The Suitable Position And Drawing Cable With Ms Shaddle, Making All Electrical Connection Including Socketing, Crimping To Complete The Work As Per Direction. 27 Installation Of Above Supplied Chlorinator Pump Set And Drawing Of Power Line By Supplying Of Necessary Wire And Continuous Earthing Connected To Auto / Manual Panel. This Includes The Cost Of Making Necessary Brick Foundation Base With Neat Cement Finish By Supplying All Requered Materials And Testing Entire Set As Per Direction Of Eic 28 Making Internal Electrification With 16Amp Main Switch / Mcb ( Make: Havells / Any Approved ) By 1.5 Sq.Mm Frlsh Grade Copper Pvc Insulated Single Core Multistrand Wire ( Make: Havells / Mescab / Finolex / Any Approved ) In Pvc Casing Of Pump House Consisting Of 2 Nos. Bracket Point, 1 No. Tube Light Point, 1 No. Bulk Head Point And 1 No. Five Pin 5 Amp. Socket Point, 1 No. Ceiling Fan Point With Controlling Switches Including Supply Of 2 Nos. Bracket With 12W Led Lamp, 1 No. 20 Watt Led Tube Light Set, 1 No. Outdoor Type Bulk Head With 9W Led Lamp And Drawing Of Necessary Earthing ( 1.0 Sq.Mm ) Material All Complete As Per Direction Eic. ( Led Light Make: Philips / Havells / Any Approved ) 29 Supply And Fitting Fixing Of 45 Watt. X 2 Nos. Led Light Set [ Make - Philips, Model: Brp031 Led45 Cw Slr Gr Psu ] With 2 Nos 40 Mm Dia 1.5 Mtr. Long G.I Pipe Bracket Fixed On The Roof Of The Pump House With Properly Grout Including Making Power Connection By 2 X 1.5 Sq. Mm Copper Fr Grade Flexible Wire Through Pvc Casing / Conduit With Drawing Earth Conductor ( 1.0 Sq Mm Copper Flexible Wire ) , Fitting Fixing Of 15 Amp Switch On Board With All Complete As Per Direction Of Eic. 30 Earthing Confirming To Is: 3043 By 50Mm Dia Gi Pipe 3.64Mm Thick X 3.04M Long And 1 X 4 Swggi ( Hot Dip ) Wire ( 4 Mts. Long ) , 13Mm Dia X 80Mm Long Gi Bolts, Double Nuts, Double Washers Including Supply & Fixing Of 15Mm Dia Gi Pipe Protection ( 1 Mtr Long ) To Be Filled With Bitumen Partly Under The Ground Level And Partly Above Ground Level Driven To An Average Depth Of 3.65 Mtrs Below The Ground Level And Restoring Surface Duly Rammed As Below. A ) For Soft Soilby Tata - Medium Gi Pipe 31 Drawing Earth By M.S. Flat Strip ( 20Mm X 3Mm ) Fromearth Bus / Electrode To Above Differentcomponents As Per I.E. Rules And As Per Direction Of Eic. 32 Supply & Fitting Fixing Of 100 Amp. Kit Kat ( 3 Nos. ) ( Make : Havells ) With Required Size Wooden Board Mounted On Wall. 33 Supply, Delivery & Fitting Fixing Of 48 Sweep 230 Volt, 50 Hz, Ac Ceiling Fan ( Make : Havells / Cg / Approved Make ) Including Fitting Fixing On Ceiling And Making Electrical Connection Complete. 34 Supply & Delivery At Site 2 Nos. Plastic Chair & 1 No. Plastic Table ( Make: Cello / Supreme / Nilkamal ) 35 Trial Operation And Guarding Of Whole Installationas Per Departmental Requirement And Guideline 1 No. Operator @ 404 / - Per Day With 8.33% Bonus. [ As Per Existing Departmental Terms & Conditions ]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
42.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Jharkhand View Result →
43.
Housing Urban and Rular Development #10426885 Price Bid
supply installation testing commissioning Of Microprocessor Based Control Panel, Online Monitoring, Wireless Connectivity Complete With Scada Led Display For Automation Of Sewage Pumps At Khushak Nallah Pump House
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Delhi View Result →
44.
Drinking Water Supply and Sanitation #10415308 Price Bid
Construction Of Over Head Tank, Tubewell With Plc Scada And Automation, Pump House, Staff Quarter, Supply, Laying & Jointing Of Rising Main Etc. At Shishgarh Nagar Panchayat Reorganisation Water Supply Scheme, Distt.-Bareilly
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Uttar Pradesh View Result →
45.
Drinking Water Supply and Sanitation #10415304 Price Bid
Construction Of Over Head Tank, Tubewell With Plc Scada And Automation, Pump House, Staff Quarter, Supply, Laying & Jointing Of Rising Main Etc. At Sainthal Nagar Panchayat Reorganisation Water Supply Scheme, Distt.-Bareilly
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
46.
Drinking Water Supply and Sanitation #10415300 Price Bid
Construction Of Over Head Tank, Tubewell With Plc Scada And Automation, Pump House, Staff Quarter, Supply, Laying & Jointing Of Rising Main Etc. At Fatehganj Purvinagar Panchayat Reorganisation Water Supply Scheme, Distt.-Bareilly
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
Uttar Pradesh View Result →
Uttar Pradesh View Result →
Uttar Pradesh View Result →
Uttar Pradesh View Result →
TenderDetail
Loading tenders