View Bid Results For Providing Stone Tile Tenders

We found 10000 Bid Results related to providing stone tile tenders. You can find Contractor details who won providing stone tile tenders along with contract details in Bid awards announcements section.

Filters
Stage
4799
3150
2976
Tender Publishing Platform
150
10775
State / UT
37
5011
1703
799
640
475
249
248
227
219
206
156
126
124
112
110
77
65
47
40
34
32
30
29
26
24
21
18
16
11
11
11
6
6
5
4
4
3
Contract Value
6288
1436
2764
408
Publish Date
25
1
0
0
0
Sector
30
6452
1309
1280
593
230
206
184
117
77
60
59
58
51
33
28
25
25
24
21
18
17
11
10
10
8
7
5
4
2
1
Ownership
7
6093
3199
1286
305
20
20
2
Within keyword
Active filters:
Showing 1–50 of 10000 tenders matching your filters
Contract Date: Jul 02, 2026 Contract Value : 1.71 Lakh
Boards / Undertakings / PSU No of Bidders 4
2.
Defence #11478095 Technical Bid
Tender For Provision Of Certain Revenue And Minor Work At Age B/R Ii Under Ge(N) Patiala=- 1 Dismantling, Floor, Hearth Or Wall Tiling Including Cm (Bedding (But Not Backing), Removing Serviceable Tiles To Store & Rubbish Off The Premises Complete All As Specified And Directed 2 M&L For Single Charge, Vitrified, Stain & Scratch Resistant, Premium Quality Coloured Tiles Area Of Each Tiles Exceeding 0.42 Sqm But Not Exceeding 1.00 Sqm, In Floors Etc Mm And 8-10 Mm Thick, In Any Pattern Of Light & Dark Tiles As Approved, Laid Over 15 Mm Thick Screed In Cm (1:6) Epoxy Cartridge Tile Grout Using Filling The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour,Complete All As Specified And Directed. 3 All As Per Item No 2 Above But As In Skirting Over 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 4 M&L For Ceramic Glossy Finish, Joint Free Premium Quality Coloured Tiles 600 X 300 Mm And 8-9 Mm Thick, In Any Pattern Of Light & Dark/Highlighters Tiles Etc As Approved, On Vertical Surfaces Such As In Skirting/Dado Etc, Set And Including 10 Mm Thick Rendering In Cement Mortar (1:4) And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 5 M & L For 15 Mm Thick Artificial Granite (Of Any Type) Work Steps, Jambs, Pillars, Window- Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. Including Screed Bed Or Bedding Layer Of Mortar 20 Mm Thick For Laying Floor Finishes Complete All As Specified. 6 Providing And Laying Premium (1St) Quality Straight Edge, Ceramic Tiles Exterior Grade Scratch Resistance Of Size 300X300X7 To 8 Mm Thick In Floors Etc. In Any Shade And Design/Pattern Of Light & Dark Tiles Etc Set And Including 15 Mm Thick Rendering In Cement Mortar (1:6) And Pointed In White Cement With Pigment To Match Complete All As Specified. 7 Taking Up Or Down Existing Steel Tubing And Connections, 15Mm Bore Complete All As Specified. 8 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 15Mm Bore Incl Fittings Complete All As Specified And Directed. 9 Taking Up Or Down Existing Steel Tubing And Connections, 20Mm Bore Complete All As Specified. 10 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 20Mm Bore Incl Fittings Complete All As Specified And Directed. 11 S&F In Repair Angle Stop Cock With Wall Flange 15Mm Cast Copper Alloy, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No-Fon-40053Pm Or Equivalent In /Hindware/Kohlar. 12 S&F In Repair 15 Mm Bore Bib Cock With Wall Flange, Cast Copper Alloy, Chromium Plated, Fancy Type With Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No Opp-15037Pm Or Equivalent In/Hindware/Kohlar. 13 S&Fin Repair Brass Chromium Plated Basin Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar Cat Part No Orp-10011Bpm Or Equivalent In /Hindware/Kohlar 14 S&F In Repair 15Mm Cp Connection 600Mm Long Including Washer And Brass Nuts All As Specified. 15 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 16 S&F In Repair Counter Top Wash Basin Of Size 600 X465Mm With Wash Basin Cabinet Size 600X455X600Mm Including Bottle Trap , Brass Waste Fitting Complete All As Specified. Make:-Cera/Hindware/Jaguar 17 S&F In Repair Toilet Roll Holder Stainless Steel Flap All As Specified. Make- Jaquar Cat Part No Can-1153S Or Equivalent In /Hindware/Kohlar 18 S&F In Repair Towelrack 600Mm Long With Lower Hanger (Stainless Steel) All As Specified.(Make: Jaquar Cat Part No Acn -1181S Or Equivalent In /Hindware/Kohlar 19 S&F In Repair Soap Dispenser With Glass Bottle (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1135N As Equivalent /Hindware/Kohlar 20 S&F In Repair Soap Dish Holder With Glass (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Akp -35731P Or Equivalent In /Hindware/Kohlar 21 S&Fin Repair Towel Ring Square With Round Flange (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1121N Or Equivalent In /Hindware/Kohlar 22 S&F In Repair Healthfaucet With 1Mtr Long Easy Flex Tube In Chrome Finish And Wall Hook Of 15 Mm Bore With Cp Pipe Complete Set Of Make -Jaquar Cat Part No Ald - 565 Or Equivalent In Parryware/Prayag 23 S&F In Repair Looking Mirror 5Mm Thick Size 3.5X3.5 Feet Incl Stud And Fastners Complete All As Specified And Directed. 24 S&F In Double Arm Wall Mounted Reversible Plain/Magnifying (X3) Pivotal Mirror All As Specified. Jaquar Cat Part No Acn -1193N Or Equivalent In /Hindware/Kohlar 25 S&F In Repair Glass Shelf Corner With Bracket Of Size 225Mm X 225Mm Thickness Of Glass 6Mm) With Cp Brass Railing And Brass Screws.Make- Jaquar Cat Part No Acn -1173 Or Equivalent In /Hindware/Kohlar 26 S&F Grating Doom 125Mm Of Ptmt. 27 S & F In Repair Vitreous China Urinal Half Stall Type White (Excluding Flushing Cistern ) Including Waste Fitting, Waste Pipe Complete All As Specified.Make-Jaquar/Hindware/Kohlar 28 S&F Ms Work In Tubular/Pipe/Angle Sections For Frame Work For Roof, Vertical Poles, Rafters And Purlins Including Washer Etc Complete All As Directed. 29 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. ( Design Of Sheet As Mangalore Tiles Pattern In Red Colour ). 30 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. 31 M & L Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Incl Preparation Of New Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 32 M&L 25Mm Thick Factory Made Coloured Interlocking Designer Polished Floor Tiles (Ultra Pattern) Of Grade M-35 Of Shape And Size As Directed,And 100Mm X 100Mm Size Tiles Piece On Every Joint Of Tiles Flooring Laid Over & Including 20Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And Directed . Note: Sample Shall Be Got Approved From Ge Before Commencement Of Work 33 S&F In Repair Stainless Steel Drapery Rod Of 20 Mm Inner Dia (In Lengths As Directed) Of & Including Decorative Finial At Both Ends And Pair Of S S Steel Brackets Fixed At Both Ends With Pvc Rawl Plug & Steel Screws On Walls/Beam, (Victorian Design)All As Specified & As Directed. Make -Sample Can Be Seen In The Office Of Engg-In-Charge For Checking And Quoting The Same 34 Demolition Of Cement Concrete Un -Reinforced In Ground Floors And Pavings N.Exc 15Cm Thickness Complete All As Specified. 35 M& L For 25Mm Thick Pcc 1:2:4 Type Bo Using 12.5 Mm Graded Stone Aggregate As In Floor Complete As Specified And Directed. 36 S & F 75 Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified. 37 S & F Floor Door Stopper Of Aluminium Alloy And Tongue, Anodised With Hard Drawn Steel Overall Length Of Cover Plate 140Mm.As In Repairs Complete All As Specified. 38 Dismantling Of Wall And Ceiling Board(Fiblre, Pulp, Insulation Etc) Any Thickness Including Cover Fillets Complete All As Specified And As Directed. 39 S & F Powder Coated Aluminum Alloy Interlocking Snap Grid Frame Work For False Ceiling Size 600Mm X 600Mm Consists Of Main Tee Runners Of Size 38Mm X 38Mm X 1.5Mm And Cross Tee Of Size 38Mm X 38Mm X 1.5Mm, Spaced Between The Main Tee At 600Mm Centre To Centre To Form A Grid Of 600Mm X 600Mm Complete All As Specified And As Directed And As Per Manufacturer. Instruction. 40 M & L For 4Mm Thick Non Asbestos Fibre Cement Building Boards Of Make E Board Classic Designer Board (Cascade Or Occenic) Of M/S Everest Industries Ltd Or Equivalent As Approved, By Ge Fixed Or Laid/ Inserted To Timber/Gi/Aluminium Framework With Complete All As Specified And As Directed. 41 Taking Down Cement Mortar Plastering On Brick Or Stone Walls, Etc. Including Raking Out Joints,Hacking For Key,Scrubbing Down With Water, Etc Complete All As Specified And As Directed. 42 M&L For Rendering 15Mm (In Two Layers 10Mm+5Mm) Thick Plaster In Cm (1:4) On Faces Of Brick Work Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 43 M&L For Rendering 5Mm Thick Plaster In Cm (1:3) On Faces Of Brick Work Or Concrete On Surfaces Of Ceiling, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 44 Complete Removal Of Existing Treatment Including Washing Rubbing Down And Stopping Of Painted Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 45 M&L For New Plaster Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 46 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 47 M & L For Cement Concrete As Pcc 1:5:10 Type E-2 Using (40Mm Graded Stone Aggregate) As Foundations,Filling And Mass Concrete Complete All As Specified. 48 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 49 Demolition Of Brick Work Or Stone/Boulder Masonary, Laid In Cement Mortar Or Cement Lime Mortar Complete All As Specified. 50 M&L Brick Work, Straight Or Curved On Plan N.Exc 6M Mean Radius In Cm 1:6 Using Old Size Brick Complete All As Specified. 51 Taking Down Chowkat Or Frame With Shutters (With Out Taking Off Shutter From The Frame ) Not Exceeding 1.5 Sqm Each As Directed By Engineer-In-Charge. 52 S&F For Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door Frames/Chowkhat Comprising Of 100 Mm X 65 Mm Size, Applying Pvc Solvent Cement And Screwed With Full Body Threaded, Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With Mild Steel Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete All As Specified And As Directed By Engr-In-Charge. 53 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Solid Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 54 S&F Stainless Steel (304 Grade) Finished Butt Hinges 125Mm Complete All As Specified And Directed 55 S & F Extruded Brass Handles, Fabricated Type Polished 150 Mm Complete All As Specified. 56 S & F Brass , Barrel Tower Bolts, With Cast Or Sheet Barrel And Rolled Or Cast Bolts And Fixed 200 Mm Complete All As Specified. 57 M&L For 250Mm Long Brass, Sliding Door Bolt Withsand Or Die-Cast Brass Hasp, Staple (Bolt Type) And Fixing Bolt With Rolled Or Drawn Brass Bolts And Fixed Complete All As Specified And As Directed. 58 Dismantling Pvc Pipes With Fittings Upto 75Mm To 110Mm Dia Complete All As Specified And Directed By Engr-In Charge.. 59 S&F For Pvc (Swr) Pipe 110 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 60 S&F For Pvc (Swr) Pipe 75 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 61 S&F For Pvc (Swr) Bends With Access Door 110 Mm Dia Complete All As Specified And As Directed. 62 All As Per Item No 61 Above But 75 Mm Dia. 63 S&F Pvc (Swr) Plain Bend 110 Mm Dia Complete All As Specified And As Directed. 64 S&F Pvc (Swr) Plain Bend 75 Mm Dia Complete All As Specified And As Directed. 65 S&F Pvc (Swr) Branch Piece Single Or Double T Equal Or Unequal With Access Door 110 Mm Dia Complete All As Specified And As Directed. 66 All As Per Item No 65 But 75 Mm Dia. 67 S&F Pvc (Swr) Vent Cowl 110 Mm Dia Complete All As Specified And As Directed. 68 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50 M And Making Good Surface 69 M&L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exc 10 Cm Girth All As Specified. 70 Taking Down Carefully Existing Points Wiring On Surface Conduit/Concealed Conduit Including Conduit From Surface And Expect Conduit In Concealed Wiring For Light/Fan/Socket/Power/Bell From Wall & Roof Along With Fitting And Fixtures Such As Switches, Sockets, Ceiling Roses, Batten Holders, Unserviceable Light Fittings, Pieces Of Wires, Gutties, Conduit, Wooden Boards Etc Removing Materials To Store For Keeping In Safe Custody Of Contractor For Which The Credit Has Been Considered Under Schedule Of Credit And Making Good The Disturbed Portion Of All Floor, Ceiling Etc All As Specified And Directed. 71 M & L For Point Wiring With 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor For One Light/Fan/Bell Point In And Including New Pvc Rigid Non Metallic Concealed Conduit 19/20 Mm Dia, Medium Duty, Isi Marked To Be Terminated In Pressed Steel Terminal Boxes With Pvc Modular Top Cover Plates Of Suitable Size For Mounting Of Modular Type Switches/Sockets/Regulators Including 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Earth Continuity Conductor Controlled By One Switch And/Or One Regulator Complete Including Cutting Chases And Making Good The Surfaces In Cm 1:3 And Finishing The Surface As Per Existing Treatment All As Specified And Directed By Engr-In-Charge.Notes: (I) Cost Of Pressed Steel Terminal Boxes And Modular Top Cover Plate Shall Be Included In Point Wiring. (Ii) Wiring Shall Be Done As Per Colour Code In Is For Phase, Neutral And Earth.(Iii) -Cost Of Eye/Bottle Thimbles Used For Connection In Switches/Sockets & Mcbs In Dbs Shall Deemed To Be Included In The Unit Rate Quoted For This Item. 72 All As Per Sl Item No 71.00 Above Herein Before But One Socket Out Let 5 Pins 5 Amp On The Same Board With Other Switches Complete All As Specified And Directed. 73 All As Per Sl Item No 71.00 Above Herein Before But For One Socket Out Let 5 Pins 5 Amp On Independent Board Complete All As Specified And Directed. 74 All As Per Item No71.00 Herein Before But 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor Incl 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Copper Earth Wire For Switch Socket Combination 3 Pin 15 Amps On Independent Board. 75 S & F In Replacement Of Modular Switch 1 Way, 6 Amps, 1 Module, 230 Volts Complete All As Specified. 76 S & F In Replacement Of Modular Switch 1 Way, 16 Amps, 1 Module, 230 Volts Complete All As Specified. 77 S & F In Replacement Of Modular Socket 5 Pin 6 Amps, 2 Module 230 Volts Complete All As Specified. 78 S & F In Replacement Of Modular Socket 5 Pin 6 &16 Amps, Combination Type 2 Module Complete All As Specified. 79 S & F In Replacement Of Modular Fan Regulator Step Type, 120 Watts, 2 Module Complete Fixed As In Repair All As Specified. 80 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 81 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Green Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 82 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Red Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 83 Supply And Fix Surface/Recess Mounted Led Luminaire 36 Watt Cool White 4000-5000K Suitable For Gridd Celling Cutout Dimensions: 2X2 Ft. Incl Connecting With Twin Core Copper Wire From Ceiling Rose To Fitting, Fixture Size: (Lxwxh) In (595X595X65) Mm Incl Lamp And Driver All As Specified & Directed. 84 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 18/20W 6500K Of Capacity ,20 Watt,4 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 85 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 86 Supply And Fix Mirror Light With Linear & Compact 12 W Mirror Light With Decorative Grey End Caps, Polycarbonate Body And Ribbed Opal Diffuser Of Capacity 9 Watt Complete All As Specified And Directed By Engr-In-Charge. 87 M & L For Sub Main Wiring With Two Single Core 4.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 4 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2 Runs Of 4.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 4.00 Sqm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note2 : Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces, Cutting Not Exc. 10 Cm Girth . (Iii) Taking Out/Down Existing Unserviceable Sub Main Wiring. 88 Taking Down And Refixing Of Ceiling Fan After Supply And Replacement Of Rubber Reel, Round Cover Plate Of Size 6 Inch Of Ceiling Fan Complete With Ms Split Clamp Two Nos, Nuts And Bolts Complete All As Specified And Directed By Engr-In-Charge. 89 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 250 Mm Sweep 900 Rpm Engineering Thermoplastic Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Louver Complete All As Specified And Directed By Engineer-In-Charge. 90 Material And Labour For Making Hole Of Suitable Size For Exhaust Fan 250 Mm/ 300Mm Sweep In Wall For Grouting And Making Good The Surface Complete All As Specified And Directed By Engr-In-Charge. 91 Supply And Fixing Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With Mcb Spn 32 Amps, Complete All As Specified And As Directed By Engineer-In-Charge. 92 S&F Poly Coated Gi Frame Work As In Grid For False Ceiling Comprising Of Protected Gi Perimeter Channel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30Mm And Web Of 27Mm Fixed To Surrounding Wall Using Nylon Sleves And Screws At 450Mm Centre To Centre/Intermediate Chaqnnel 0.9Mm Thick Having To Equal Flanges Of 15Mm Each And Web Of 45 Mm Suspended From Soffit And Approx 900Mm Centre To Centre With Gi Cleat And Steel Expansion Fasterners With And Including Ceiling Section (Not Exc 1.2 Metre Length) Of 0.55Mm Thickness Having Kurled Web Of 50Mm And Flange Of 26Mm Each With Lips Of 10.5Mm Fixed To The Intermediate Channel With Connecting Clips Acorss The Intermediate Channel At 457Mm Centre To Centre And Hangers 6Mm Dia Gi (Upto 1200 Mm Length Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of Gi Flat 40 X3Mm Size 60Mm Long Complete With And Including 7Mm Thick Pvc Laminated Gypsum Tiles Of Size 595X595Mm Complete All As Specified & Directed 93 M&L For Complete Removal Of Existing Surfaces Of Walls Including Cornices, Pillasters Etc, And Applying Two Coats Of Obd Over And Incl A Coat Of Interior Wall Primer Over Wall Care Putty Complete All As Specified And Directed. 94 M&L For Complete Removal Of Existing Treatment On Walls And Applying 02 Coats Of Exterior Weather Emulsion Paint To External Walls/Rcc Surfaces/Soffits Of Chajjas/Roof Projections/Cantilevers/Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer And Over Wall Care Putty Complete All As Specified. 95 S&F Stainless Steel Tubing Of 25 Mm Dia Chromium Plated Min. 1.0 Mm Wall Thickness As In Curtain Rod Complete Incl S&F 02 Nos Stainless Steel Brackets/Finials Fency Type, Stops Fixed With Ss Screws Etc All As Specified & Directed.Note : For The Purpose Of Mesurement And Payment Running Length Of Curtain Rod Only Shall Be Considered. 96 Taking Down Chowkhats Or Frames Of Any Description Exc 1.5 Sqm And N. Exc. 4 Sqm Each (Without Taking Off Shutters From The Frame) Including Cutting Hole To Size For Receive Fresh Pcc Of Hold Fast And Making Good The Disturbed Surface Same Complete All As Specified And Directed. 97 S&F Factory Made Pressed Steel Frames Made Of Ms Sheet Of 1.20 Mm Thickness For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified,Size 125X60Mm 98 M&L Pcc 1:3:6 Type C-0 In 12.5 Mm Graded Stone Aggregates Hold Fast Fillinng Inside Frame & Hold Fasts Etc Complete All As Specified 99 S&F Factory Made Flush Shutters 35Mm Thick Ply Construction, Bwp Confirming To Is 2202, Solid Core Construction, With Block Board Core And Plywood Face Panels Commercial Type On Both Sides With 6Mm Thick Lipping Frame To Match Including Supply And Fixing Following Items :(A) Mild Steel Butt Hinges 125Mm - 3 Nos. Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos. Per Leaf(D) Stainless Steel (804 Grade) Finished Sliding Bolt 250 Mm - 1 No. Per Leaf(E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 100 S&F 35Mm Thick Glazed And Skelton Shutters Of 2Nd Class Hard Wood (Factory Made) Open Rebated And Divided To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shutter As Specified In Ssr-91 Pt-1 Section 8 Clause 8.20(A), Kiln Seasoned And Chemically Pressure Treated All As Specified Including Stainless Steel 304 Grade Wire Cloth (0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm) All As Specified And Including Supply And Fixing Following Items :(A) Stainless Steel (304 Grade) Finished Butt Hinges 125Mm - 3 Nos Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos Per Leaf(D) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16X250Mm - 1 No Per Leaf (E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 101 M&L For Two Coat Of Synthetic Enamel Paint (Finishing Coat) Over One Coat Of Pink Primer To New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Incl Prepration Of Surfaces Complete All As Specified And Directed. 102 S&F 300Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 103 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 104 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X35 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 105 S & F In Replacement Of Surface Mounted Led Bulk Head Luminaire Of Capacity 10 Watt With Abs Body & Polycarbonate Diffuser, Ip54 Inc Connection With ,With Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 106 Supply And Fix Lamp Holder Including Led Bulb 9 W Including Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 107 M & L For Sub Main Wiring With Two Single Core 6.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 6.0 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2(Two) Runs Of 6.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 6.00 Sqmm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note 2 :(I) Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces And Cutting Not Exc. 10 Cm Girth . (Iii) Including Taking Out/Down Existing Unserviceable Sub Main Wiring. 108 S & F In Replacement Of Sheet Metal Enclosure Db Tpn 4 Ways Double Door 415 Volts With 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables Complete With Ip-43 Protection Complete All As Specified And Directed By Engr-In-Charge 109 S & F In Replacement Of Mcb, Triple Pole & Neutral (Tpn) 10 Ka 240 Volts 40 To 63 Amp Capacity Fixing In Db’S Complete All As Specified And Directed. (Note: Mcb Should Be B Or C Curve As Directed By Engineer In Charge) 110 Supply And Fix In Replacement Of Sheet Metal Enclosure 8 Ways Double Door For Dbs When Mcbs Are To Be Used 240,Volts Including 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link All Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables With Ip43 Protection Complete All As Specified & Directed By Engr-In-Charge. 111 S & F In Replacement Of Mcb, Single Pole 240 Volts 6 To 32 Amp Capacity For Fixing In Db’S Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 112 Supply And Fix In Replacement Of Mcb , Spn, 240 Volts ,40-63 Amp For Fixing In Dbs Of Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 113 M & L In Replacement Of Unsv Earthing Complete With Galvanized Iron Earth Plate Electrode Of Size 600X600X6.0Mm , Buried Directly In Ground (Earth Pit Not Less Than 2.25 Mtrs Below Normal Ground Level) With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galvanized Earth Lead Wire 4.0 Mm Dia By Means Of Bolts , Nuts , Check Nuts And Galvanized Iron Or Steel Including Earth Work In Any Type Of Soil, Charcoal Salt 15 Cm Around The Earth Plate 20 Mm Dia Watering Pipe Medium Grade 1.70 Mtr Long With A Plug At Top, Gi Protection Pipe Light Grade 15 Mm Dia From Earth Pit To Main Board Including Pcc Pit In Cement Concrete 1:2:4 Along With Ci Frame And Cover 10Mm Thick Duly Hinged To Ci Frame As Shown In The Electrical Plate No3 Of Ssr 2009 Part 1 Specification At Page 497. 114 Xlpe Insulated ,Screened, Pvc Bedded, Galvanized Steel Wire Armoured, Electric Power Cables (Heavy Duty) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 25 Sq Mm 4 Core Supplied & Laid In Replacement Complete All As Specified& Directed By Engineer-In-Charge. 115 Excavation In Trenches Not Exceeding 1.5 Mtr Wide And Not Exceeding 1.5 Mtr In Depth For Laying Of Cables Including Getting Out In Any Kind Of Soil Complete All As Specified And Directed. 116 Returning Filling In Including Spreading, Levelling, And Well Ramming, In Layers Not Exceeding 25 Cm Each Layer Of Any Kind Of Soil. 117 Removing Surplus Excavated Material From Site Not Exceeding 50 Mtrs From Starting Point And Depositing Where Directed At Level Not Exceeding 1.5 Mtr Above The Starting Point. 118 Material And Labour For Sand Cushioning For Cables 8 Cm Below The Cable And 15 Cm Above With Dry River Sand In Trenches For Cushioning Of Underground Cable Line Including Spreading, Leveling, Well Ramming Completed All As Specified And Directed. 119 Cutting Of Hardstanding Floor/Wall For Laying Of Cable Including Matching With Suface By Using Cement Concrete All As Specified And Directed. 120 Supplying & Laying Factory Made Unreinforced Precast Concrete Cable Covers Class Lv Type 1, Flat, Size 250X150X40Mm Laid In Trenches As Protection To Cables Complete All As Directed By Engr-In-Charge 121 Material And Labour For Replacement Of Gi Tubing Light Grade 40 Mm Bore For Passing Through Cables Under The Floor ,Along The Wall Or Along The Pole Complete All As Specified And Directed. 122 Dismantling Of Stone Slab And Tiles Laid Bedded And Pointed In Any Mortar Description Or Thickness In Floors, Apron Etc Complete All As Specified. 123 M & L For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Complete All As Specified. 124 M&L For Virified Ceramic Light Shade Tiles 8 - 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc,Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Epoxy Cartridge Tile Grout Using Fill The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour. 125 All As Per Item No 124 But As A Skirting Incl. 10Mm Thick Rendering As In Back Coat Complete All As Specified. 126 M&L For 7 To 8 Mm Ant-Skid Ceramic Joint Free Premium Quality Coloured Tiles Area Of Each Tile Esc 0.06 Spm But Next 0.11Sqm, As In Floors Etc. In Any Pattern Ghe & Dark Tiles As Approved, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, In Floors Etc. Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 127 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Laid Over Cement Screed Base 15Mm Thick In Cm 1:6 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 128 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations All As Specified. 129 Dismantling Water Tanks And Removing To Store Of Capacity Exc 500 & Not Exc 1000 Ltrs Complete All As Specified. 130 Supply And And Fixing, Hoisting Pvc Tank Of 1000 Ltr Capacity Including Supplied And Fixed 20Mm Dia Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed.(Minimum Weight 15Mm-142 Gms/20Mm-210Gms/25Mm-455 Gms/40Mm-690 Gms Float Valve Assembly Complete All As Specified And Directed. 131 S&F In Repair Wall Mixture Mixing Valves Incl. Three Joints To Steel Pipes Or Unions 15 Mm Bore Fancy Type Best Quality As Per Sample Approved By Ge Make-Jaquar Cat Part No Qqp-7217Pm Or Equivalent In Hindware/Kohlar. 132 S&F Pvc Cabinet 600X450Mm Overall Size With Looking Mirror Of Selected Qality Glass Mountedover Pvc Framing As Per Sample Complete Fixed In Repair Complete All As Specified. 133 S&F Stainless Steel Plate Rack Of Size Not Less Than 90Cmx75Cm(Wt N. Less Than 4 Kg) Fixed With Stainless Steel Screw Including Taking Out Old Unserviceable Wooden Plate Rack As Approved By Ge Complete All As Specified. 134 S&F In Repairs Chromium Plated Shower Roses With Swivel Joints 125 Mm Dia Size Incl Fixing To Gi Pipe/Union Fixed Make-Jaquar /Hindware/Kohlar. 135 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 Finished Even And Smooth ( Without Using Extra Cement ) With Sagol Finish On Plastered Surface Complete All As Specified And As Directed. 136 M&L For Preparation Of New Decorated Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Exterior Emulsion Over One Coat Of Primer And Over 2Mm Thick Putty For Levelling And Smoothening, Complete All As Specified And Directed. 137 M&L Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Oil Bound Distemper Over 1.5Mm Thick Wall Care Putty Complete All As Specified And Directed. 138 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 139 S&F Sinks With Drainage Board Made Of Stainless Steel Lmm Thickkitchen Or Laboratory With Plugs,Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. 140 S&F In Repair Brass Chromium Plated Sink Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar /Hindware/Kohlar 141 S&F Powder Coated Anodised Aluminium Frame For Doors, Windows Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And Directed. 142 S&F Frosted Glass 4.00Mm Thick Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.50Sqm In Each Panes Complete All As Specified And Directed. 143 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Sketon/Glased Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 144 S&F Factory Made Wpc Extruded Board Cnc Machine Cut Jali Fixed To Skelton Door As Per Approved Design Complete All As Specified And Directed 145 S&F Kitchen Cabinets Including All Fittings And Fixtures Incl The Follwing. (A) 19Mm Thick Plywood Of Commercial Block Board,Make: Kitply/Century Ply/ Green Ply(B) 1Mm Thick Commerical Lamination On Both Side Fixed To Black Board(Colour And Design As Approved)(C) Ss Pullout Basket Ss Finish Of Plain 15 X 20 X 6 (D) D Type Handle 100Mm Ss Finish(E) Pullout Basket Ss Finish Cutlery Wire Of Size 15X20X4 (F) 2Nd Class Hard As In Frame Work(G)Ss Channels For Pullout Basket As Required. (Note:- The Measurement Shall Be Taken From Front Elevation And Not Girthwise. 146 S&F Factory Made Upvc Brown Colour Door Shutter Made Of Extruded Profile With Wall Thickness Of 2.3Mm(+-0.2Mm) Door Profile With Hollow Section With Multy Chamber. Frame (60X62Mm),Sash(42Mmx67Mm).Sliding Interlock(One Verticle Length In Each Shutter)(45.5Mmx28Mm).Glazing Bead(24.5Mmx16Mm)Will Be Mittred Cut And Fusion Welded At All Corner.Including Drilling Holes For Fixing Hardware And Drainge Of Water Etc Am,.Making Arrangement For Fixing Of Hardware.Epdm Gasket,1.2+0.2 Mm Thick Galvanised Steel Frame(30Mmx21.5Mm).Sash (30Mmx18Mm)Profile To Be Inserted In Required Profile.Frame Will Be Finshed To The Wall With 8Mmx100Mm Long Fasteners.Hardware Touch Lockof Zinc Alloyed(Brown Powder Coated)Steel Roller System Including 5Mm Thick Glazing With Selected Quality Glass ,Aluminium Track And Bottom Rail For Two Track Sliding Fram,Wool Pine For Sliding Sash And Interlock. Note.The Unit Rate Coated By Contractor Includes Cost Of Glass And All Other Conncted Accessories,Net Opening Will Be Measured For Purpose.Make:H2O Window,Fenesta,Anuplast As Approved By Ge. 147 M&L For Rcc 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate In Any Situation Except Foundation Complete All As Specified And Directed. 148 S&F 10Mm Dia And Above Tmt Bars Cut To Length, Bend To Shape As Required Including Cranking, Hooking Ends & Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Complete All As Specified And Directd. 149 All As Item No 77 Here In Before But 5Mm Dia And Over Upto & Including 10Mm Dia In Stirrups, Spaces & Binder Complete All As Specified And Directd. 150 S & F Powder Coated Aluminium Window/Ventilator Shutters, Side Hung Type With Sash Bars, Including Necessay Joinery Cleats, Glazing Clips, Rubber Packing, Chowkats Aluminium Snap Beading, Screws, Suitable Handle Etc With And Including Sheet Glass Or Ordinary Glazing Quality Of 4Mm Thick And Incl Gi Wire Mesh 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm , Size Of Side Rails , Top Rails , Bottom Rail 85X44.5Mm And Size Of Chowkat Frame 101.6X44.45Mm And Thickness Of Aluminium Member Shall Be 1.40Mm Thick Complete All As Specified. 151 S&F For Prelaminated Particle Board 18/19 Mm Interior Grade Prelaminated On One Side With Decorative Choice Lamination And Other Side Balancing White Lamination Fixed With Screw Timber Frame Work Including Dismantling Board All As Specified. 152 S&F In Repair Continuous (Paino) Hinges, Mild Steel, Bright Finish Or Electrogalvanised Width Of Flap (When Open) In 40Mm All As Specified. 153 S&F In Repair 40Mm Dia, Cupboard Knobs Fixed With Nut, Screw And Washer Of Mild Steel Bright Finished All As Specified. 154 S&F Ball Catches With 8Mm Dia Steel Ball And Brass Body And Striking Plate Including Letting In And Fixing Complete All As Specified. 155 Supply & Fix In Replacement Of Modular Bell Push Switch 1 Way, 6 Amps, 1 Module Complete All As Specified. 156 Supply & Fix In Replacement Of Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified. 157 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 300 Mm Sweep 900 Rpm Metal Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Hole Making Louver Complete All As Specified And Directed By Engineer-In-Charge. 158 S & F Modern Energy Efficient Bedroom Muziris Wall Decorative Light Of Capacity 20 Watt Single Headed 240 Volt, Ip20 Rating, Controller Type (Push Button), Product Weight 1.04 Kg, Body Material (Metal), Power Source (Corded Electric),Lamp Base E27, Colour(Bronze) Incl Electrically Connection , Including Removing Of Unserviceable Decorative Light Fittings Of Any Description Complete All As Specified And Directed By Engr-In-Charge. Make: Philips Model No 31425 Or As Equivalent. 159 Excavating In Trenches N Exc 1.50M In Width And N Exc 1.50M In Depth For Foundation, Manholes Etc As Well As N Exc 10 Sqm On Plan Area And Getting Out In Soft/Loose Soil All As Specified And Directed. 160 M&L For Pcc 1:5:10 Type E-2, Using 40Mm Graded Crushed Stone Aggregate In Foundation, Filling And Mass Concrete All As Specified And Directed. 161 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 162 S&F Mild Steel Deformed Bars, 6Mm To 8Mm Dia Cut To Length, Bent To Shape Required Including Cranking And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0-.90Mm Dia Complete. 163 M&L For Form Work To Soffits Of Suspended Slabs Such As Roof Slabs Etc For Rough Finished Concrete Surface Complete All As Specified And Directed. 164 M&L For Form Work To Sides For Slabs And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10 Cm But N Exc 20 Cm Wide For Fair Finished Concrete Surface Complete All As Specified And Directed. 165 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work, Vertical Or To Batter For Rough Finished Flat Surfaces Of Concrete. 166 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions, Square, Rectangular Or Polygonal For Rough Finished Flat Surfaces Of Concrete. 167 M&L For Rendering In Cement Mortar (1:6) 10 Mm Thick Finished Even Smooth Complete All As Specified On Brick Or Concrete Surface Of Fair Faces. 168 M&L 15Mm Thick Cement Plaster In Two Layer First Coat In Cm 1:6,10Cm Thick & Second Layer 5Mm Thick In Cm 1:4 Mixed With Wpc 3% By Weight Of Cement Including Finishing Fair & Even On Brick Or Concrete Surfaces Of Othern Than Fair Faces. 169 M&L For 5Mm Thick Cement Plastering To Rcc Surfaces In Cm :1:3) Finished Even And Smooth W/O Using Extra Cement On Ceiling Surfaces. 170 S&F Stainless Steel Butt Hinges Medium Weight Cold Rolled Isi Marked Of Size 100 Mm Complete All As Specified And Directed. 171 M&L For Ms Framed Guard Bars Conforming To Fe-410-0 Or Fe-310-0 Welded To Steel Windows/Ventilations Complete All As Specified And Directed. 172 S&F Vitrous China Squatting Pan Of Orissa Patterns Long Pan Size 580Mx440Mm White With P Or S Trap Front Of Back Inlet And Foot Rest Including Long Band Any Pattern (Excluding Flushing Cistern And Flush Pipe) Including Provision For Lime Concrete Bedding. 173 S&F Pvc Flushing Cistern Low Level 10 Ltr Cap With Inlet Ball Valve Float And Handle Syphonic Action Type Incl Brackets And Flush Pipe Of Polythene Of Low Or High Density Isi Marked. 174 S & F In Repairs Vitreous China Oval Shape Wash Basin, White, Flat Back, Size 580 X 450 Mm Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets With 32 Mm Dia Waste Fittings, Brass, Chromium Plated With Waste Pipe Complete All As Specified. 175 S&F Looking Mirror Of Selected Quality Mounted On 6 Mm Thick Ply And Fixed To Wall With Wooden Plugs Chromium Plated Brass Screws And Washers. 176 S&F For Ci Floor Trap With Incl Jointing With Waste Pipe In Cement Mortar Of Size 100Mm. 177 S&F Gully Trap Stone Ware Square Of Round Mounted Type P Of Size 150X150Mm. 178 S&F 20Mm Dia Stop Valve Of Copper Alloy Screwed Down High Pressure With Crutch Or Butter Fly Handle Screwed On Both Ends For Iron Pipe Or For Union Fixed. 179 S&F Pvc Connection 15Mm Dia 600Mm Long Of Heavy Grade Screwed One End To Inlet Of Whb/Pillar Tap/Cistern Etc Complete Incl Brass Union Coupling On Both Ends Connfirming To Is-3076 Complete With Connector For Connection Old Water. 180 S& F For Ci Pipe 75Mm Dia Laid In Floor In Any Length With Or Without Cars With Cement Joint (Waste & Vent Pipe). 181 All As Per Item No 38 Here In Before But 100Mm Dia. 182 S&F For Ci Bend Any Radius Disminshing Pieces Or Tyes Of 100Mm Bore With Ducks For Or Head Rest. 183 S&F For Ci Branch Pieces Single Equal Or Unequal Ordinary Or Inverted Or With Paralled Brnach 100 Mm Bore. 184 S&F Cast Iron Sand Cast Pipe 100 Mm Dia With Or Without Cars With Cement Joint Fixed To Walls. 185 S&F Cast Iron 100 Mm Cowl. 186 M&L For Pcc 1:4:8 Type D-2 Using 40Mm Graded Stone Aggregate)75Mm Thick On In Sub Base Of Fllor .. 187 M&L For 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directd. 188 M&L For Coloured Glazed Ceramic Tiles On Vertical Surface (300Mmx600Mx7M) Thick Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 189 M&L For Coloured Non Skid Ceramic(300X300Mm) Tiles 7 To 8Mm Thick As In Floor Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 190 S&F Steel Ventilation With Top Hung Shutter Including Hinges, Steel Peg Stay Complete. 191 S&F 4Mm Thick Sheet Glass Of Figured,Pin Headed And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each. 192 M&L For Preparation Of Newly Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Over 10 Cm Width Or Girth Complete All As Specified And Directd. 193 M&L For Preparation Of Newly Plastered Surfaces And Applying Two Coats Of Cement Base Paint Over A Coat Of Chalk Whiting Complete All As Specified And Directd. 194 M&L For Three Coats Of White Wash On Wall Of Newly Plastered Surface. 195 S&F For Preparation Of Newly Plastered Surfaces And Applying Three Coats Of White Wash On Ceiling. 196 M & L For Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed. 197 S&F Factory Made Solid Pvc Moulded Door Shutter, With Particle Board Core, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face & 5Mm Thick Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing All As Specified. 198 S&F Aluminium Tower Bolt 150Mm Long Stove Enamelled Black With Bright Bolt & Fixed. 199 S&F Aluminium Sliding Door Bolt With Hasp And Staples Type Bolt Type , 300Mm Long Stove Enamelled And Fixing Clips Of Sheet Cast Or Extruded Section Or Cast Aluminium Alloy And Fixed All As Specified. 200 S&F Aluminium Alloy Handle Of 100M Size Oval Type Stove Enamelled & Fixed All As Specified. 201 M&L For Rendering 10Mm Thick Cm (1:4) On Roof Slab Top, Mixed With Water Proofing Liquid Finished Even And Fair Without Using Extra Cement Complete All As Specified. Note: Water Proofing Liquid Shall Be Measured And Paid Separately. 202 M & L For Cleaning The Newly Plastered Surfaces Of Concrete ( Roof Etc) With Wire Brushes And Applying Water Proofing Treatment As Under :-I) Apply One Coat Of Oil Bound Bituminous Primer @ 0.25 Kg/Sq.M Ii) Providing And Laying 3 Mm Thick App Modified Water Proofing Membrane Weighing Not Less Than 3.5 Kg / Sqm Reinforced With Non Woven Polyester Mat Weighing Not Less Than 160 Gm/Sqm All As Specified Procured From Any One Of The Approved ManufacturerS Iii) Apply One Coat Of Solar Reflective Bituminous Aluminium Paint @ 0.15 Kg/Sqm Over Membrane Over Non Assesble Roof Surfaces Complete All As Per ManufacturerS Instructions And As Directed . 203 M/L Brick Work In Cm1:4, In Half Brick Thick Wall. 204 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 205 S/F Vitreous China Toilet Paper Holder Fixed To Walls With Chromium Plated Cp) Brass Screws 206 S/F Vitreous China Soap Dish Of Appx Size 160*160*90Mm Any Type Fixed To Plugs With Chromium Plated Brass Screws 207 S/F Sheet Glass Shelf Assembly Consistig Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Brackets Guard And Railing 60Cm Long 208 S & F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D Type, 60 Cm Long Between Flanges Complete All As Specified. 209 M & L For Granite 20 Mm Thick Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Griding And Polishing Types All As Specified. 210 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 211 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 212 S&F Health Faucet Including Ms/Anodised Hanging Device Fixed Complete All As Specified And As Directed. 213 Surface Excavation Not Exceeding 30Cm Deep And Averaging 15Cm Deep And Getting Out In Loose / Soft Soil All As Specified And Directed. 214 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 215 M & L 100Mm Thick Pcc 1: 4: 8 Type D2 (Using 40Mm Graded Stone Aggregate) As In Sub Base Complete All As Specified And Directed. 216 M&L For Machine Pressed Precast Concrete Interlocking Paver Block Rubber Moulded Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness, M-35 Grade With Grey And Pigment As In Floor/Pavement Complete All As Specified And As Directed. 217 M&L For Providing Precast Concrete Type C-1, 1:2:4(Using 20Mm Graded Stone Aggregate) As In Kerb Blocks With Plain Fiar Faces, Including Chamferes, Weathering, Throating Etc And Setting In Mortar 1:4 Complete With Joints To Match. 218 M&L For Cement Concrete Type 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And As Directed. 219 M & L For Sand Filling Under Floors Or In Foundation Including Watering And Consolidation 220 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X25 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 221 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 222 M&L For Boring Of Holes Under Road, Pavement, Hard Standing By Trench-Less Technology Using Ultrasound Technique And Necessary Machine Suitable To Pass Through 40 To 80 Mm Bore Gi Tubing And Cable Etc Complete All As Specified And Directed.Note: Gi Pipe Shall Be Measured And Paid Seperately Under Relevant Item.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
3.
Housing Urban and Rular Development #11475953 Technical Bid
bill of quantities (boq) for renovation of toilets at eight floors (ground floor, 1st, 2nd, 3rd, 4th, 5th, 6th & 7th floors) and pantry at 8th floor of ncdc headquarters building, 4, siri institutional area, august kranti marg, new delhi – 110016 schedule a- civil works sl. no. description of items unit quantity rate amount sub-head : 1 dismantling / demolition works , dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. , dismantling tile work in floors,walls and roofs laid in cement mortar including stacking material within 50 metres lead. , dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead , of area 3 sqm. and below , dismantling old plaster or water proofing or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. , demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar , dismantling of flushing cistern of all types c.i./pvc/vitrious china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. , vitreous china water closet indian / european , vitreous china wash basins / urinals , dismantling existing floors of bathrooms and toilets as per instructions. the cost inclusive of stacking of dismantled materials (serviceable material) in good condition and also disposal of broken unserviceable materials at contractors own place. , dismantling of existing cp brass fittings, bottle traps and existing gi & ci pipes / fittings, wherever required in toilet as per instructions. the cost inclusive of stacking of existing brass fittings as per instructions of engineer - in - charge and the location directed by him. , dismantling & removal of malbaa from the sunken areas including stacking of serviceable and unserviceable material separately in the lead of 50 mts.after digging the same till the existing waterproofing is visible. the unserviceable material (inclusive of existing waterproofing, if any, of any nature) shall be removed from the sunken areas and the contractor should stack the same at his own place. sub total 0.0 sub head:2 wood work , providing and fixing wood work in frames of doors, windows, celestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). a. sal wood , providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws , extra for providing and fixing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter is to be measured for payment purpose). sub total 0.0 sub head:3 finishing work , providing and applying 12mm cement plaster including making grooves wherever required of mix 1:6 . (1 cement :6 coarse sand) , brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) , providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “t” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “t” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “t” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “t” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. main “t” runners to be suspended from ceiling using gi slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm gi adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main t, bottom exposed width of 24 mm of all t-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by engineer-in-charge. , 12.5 mm thick square edge pvc laminated gypsum tile of size 595x595 mm, made of gypsum plasterboard, manufactured from natural gypsum as per is 2095 part i and laminated with white 0.16mm thick fire retardant pvc film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side pvc film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. , providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. size of tile 800x800 (note: a. base rate of tile in the range of rs.90-95/- per sq.ft. b. brands: kajaria, euro, rak ceramics, somany or equivalent only ) , providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointingwith grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 800x800 mm (note: a. base rate of tile in the range of rs.90 -95 per sq.ft. brands: kajaria, euro, rak ceramics, somany or equivalent only ) , providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. completeat all levels.granite stone slab of colour black, cherry/ruby red , providing and fixing1500x500 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed towooden cleats with c.p. brass screws and washers complete.mirror make:asahi, saint gobain or equivalent as approved by engineer in charge sub total sub head:4 waterproofing work , providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of w.c., kitchen and the like consisting of: (i) ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to is : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) iind course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) iiird course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv)ivth course of 400 micron thick pvc sheet. (overlaps at joints of pvc sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). , providing and laying water proofing treatment in sunken portion of wcs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. this layer will be allowed to air cure for 4 hours. (b) second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. this layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. , supplying and filling in sunken with sand under floors, including watering,ramming, consolidating and dressing complete. sub total 0.0 sub-head : 5 plumbing / sanitary work , providing and fixing white vitreous china pedestal type water closet(european type-one piece) with seat and lid, 10 litre low level white vitreous chinaflushing cistern & c.p. flush bend with fittings & c.i. brackets, 40 mm flushbend, overflow arrangement with specials of standard make and mosquitoproof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floorswherever required : w.c. pan with isi marked white solid plastic seat and lid , providing and fixing water closet squatting pan (indian type w.c. pan ) with 100 mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete, includingcutting and making good the walls and floors wherever required:white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests , providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (i)white vitreous china wash basin size 630x450 mm with a pair of 15 mm c.p. brass pillar taps , providing and fixing white vitreous china flat back half stall urinal of 710x485x300 mm or 640x370x310 or 610x390x370mm sizes with white pvc automatic flushing cistern, with fittings,standard size c.p. brass flush pipe, spreaders with unions and clamps (allin c.p. brass) with waste fitting as per is : 2556, c.i. trap with outlet gratingand other couplings in c.p. brass, including painting of fittings and cuttingand making good the walls and floors wherever required : range of two half stall urinals with 10 litre p.v.c. automatic flushing cistern , providing and fixing stainless steel a isi 304 (18/8) kitchen sink as peris:13983 with c.i. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the walls wherever required :kitchen sink with drain board 510x1040 mm bowl depth 225 mm , providing and fixing stone slab with table rubbed, edges rounded and polished,of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting achase of appropriate width with chase cutter and embedding the stone in thechase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 6 mm nominal size) as per direction of engineer-in-charge and finished smooth. (granite stone of approved shade) , providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work, including cutting chases and making good the walls etc.following dia mm nominal outer dia pipes),(astral, ashirwad or quivalent make) , 15mm nominal outer dia. pipes , 20mm nominal outer dia. pipes , 32mm nominal outer dia. pipes , 50mm nominal outer dia. pipes , providing and fixing 3 layer pp-r (poly propylene random copolymer)pipes confirming to is:15801 uv stabilized & anti - microbial fusion welded,having thermal stability for hot & cold water supply, including all pp - r plain & brass threaded polypropylene random fittings, including trenching,refilling & testing of joints complete as per direction of engineer-in-charge. (concealed work, including cutting chases and making good the walls etc.following dia mm nominal outer dia pipes),(astral, ashirwad or equivalent make) , 100mm nominal outer dia. pipes , 150mm nominal outer dia. pipes , all internal sanitary works , providing and fixing c.p. brass long nose bib cock of approved quality (15 mm nominal bore) , providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931 , providing and fixing brass 2 in 1 pillar cock of approved quality (15 mm nominal bore) sub total 0.0 total sch a 0.0 schedule b- elctrical works sl.no. description unit quantity rate amount (in rs.) , wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls/hffr pvc insulated copper conductor single core cable etc. as required.(wire make- havells, polycab, finolex or equivalent. modular switch, socket, box, plate, etc make- havells, roma or equivalent. steel conduit make-bec, unicon or equivalent) , group c , wiring for circuit/ submain wiring along with earth wire with the following sizes of frls/hffr pvc insulated copper conductor, single core cable in surface/recessed steel conduit as required.(wire make- havells, polycab, finolex or equivalent) , 2 x 4 sq. mm + 1 x 4 sq. mm earth wire , 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire , supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.(make- havells, schneider or equivalent) , 250 mm x 300 mm x 100 mm deep , 180 mm x 100 mm x 60 mm deep , supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(make- havells, roma or equivalent , 3 pin 5/6 a socket outlet , 5/6 a switch , 15/16 a switch , 6 pin 15/16 a socket outlet , supplying and fixing following size/ modules, gi box along with modular base & cover plate for modular switches in recess etc. as required.(make- havells, finolex or equivalent , 8 module (125mmx125mm) , 12 module (200mmx150mm) , 6 module (200mmx75mm) , installation, testing and commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(make- havells, crompton or equivalent , 510 mm sweep , led down lighter (cob type) (system lumen efficacy ≥120 lm/watt ) supplying, installation, testing & commissioning of led recessed/surface down lighter (round / square/ rectangular) cob type of following body material and construction as per is : 10322 with driver as per the requirement with driver efficiency 85%, operating voltage ac 140-270 volt, frequency 50/60 hz, operating temp range -5 0c to 40 0c, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10%, p. f.≥0.95, ip20, cri 80 , ugr (unified glare rating) 19, flicker free (flicker should be below 5 %), life time (led, driver & electrical circuitry), life time of minimum 50000 burning hours with, 70% of initial lumen maintained till life ends , cct 3000°k / 4000°k / 5700°k /6500°k (as per ansi bin), sdcm(standard deviation colour matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard. manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy ≥120 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted shape size and cct shall be as approved by engineer-in- charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90°c). powder coated die cast /extruded aluminium body including trim with aluminium reflector(make- havells, philips or equivalent) , 12 -15 watt , led batten light (system lumen efficacy ≥120 135 lm/watt) supplying, installation, testing & commissioning of led surface mounted batten light of following body material and construction as per is : 10322 with driver (replaceable) as per the requirement with driver efficiency 85%, operating voltage ac 140- 270 volt, frequency 50/60 hz, operating temp range -5 0c to 40 0c, internal surge protection of 2.5 kv with short & open circuit protection ,thd 10% , p. f.≥0.95, ip20, cri 80, flicker free (flicker should be below 5 %), life time (led,driver & electrical circuitry), of minimum 50000 burning hours with 70% of initial lumen maintained till life ends, cct 3000°k / 4000°k / 5700°k /6500°k 46 delhi schedule of rates (e&m)-2025(as per ansi bin), sdcm(standard deviation colour matching) 3, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard. manufactures word mark/ name engraved/ embossing/ screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy ≥120 135 lm/watt output. lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminium housing such that led junction temperature shall not rise above 90°c).powder coated die cast /extruded aluminium body (thickness 1.20 mm)(make- havells, philips or equivalent) , 18- 22 watt , led strip light (make- philips, wipro or equivalent) , automatic hand dryer (make- dolphy, euronics or equivalent) , automatic touchless toilet urinal sensor alongwith solenoid valve, flexible hose, etc(make- parryware, jaquar or equivalent) total sch b total total (sch a+schb) 0.0 say rs.
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 5
4.
Public Administrative Department #11466134 Price Bid
Tender for Earth Work In Excavation In Trenches For Foundation Pipe Cable Etc In Ordinary Soil Etc All Comp , Dismantaling Brick Work Or Stone Work In Lime Of Cement Mortar And Including Stocking Of Materials As Directed Etc All Comp , Dismantling Cement Concrete Or Brick Or Granolithic Floors Including Etc All Comp , Dismentaling Of Interlocking Tiles Etc All Comp , Laying Of Base Concrete 1:6:12 With Cement C.Sand & 40 Mm Brick Ballast Including Mat Lab T&P Etc All Comp , Centering And Shuttering Including Strutting Propping Etc All Comp , Reinforced Cement Concrete Works With Cement Approved Coarse Sand And 2 Cm (3/4) Gauge Approved Stone Ballast Etc All Comp , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work Etc All Comp , Providing And Laying In Cement Concrete 4:2:1 Of Not Less Than Strength Of M 150 ( Stone Ballast 4 (20 Mm Normal Size):2 Approved Etc All Comp , Relaying Of 80 Mm Plain Cement Concrete Interlocking Tiles Et Call Comp , Sale Of Material To Contractor Old Brick Etc All completion , Sale Of Material To Contractor Brick Bats Etc All completion , Supply And Fixing Inogration Board With Paidestal And Granite Board Etc All Comp , Construction Of Granular Sub Base (Gsb) By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Etc All Comp , Cartage Of Earth Up To 3.00 Km Including Loading & Unloading But Excluding Stacking On Pucca Road Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
5.
Public Administrative Department #11466132 Price Bid
Tender for Dismentaling Of Interlocking Tiles Etc All Cmp , Sale Of Material To Contractor Old Interlocking Tiles Etc All Comp , Desilting/Cleaning Of Open Service Lane Under Foul Position Etc Call Comp , Making Bundha By Sand Filled Bag Including Cost Of Local Sand Empty Cement Bag Stretching Etc All Comp , Earth Work In Cutting In Ordinary Soil Lead 30 Mt & Lift 1.5 Mtincl Lab T&P Etc All Comp , Class-150 Brick Work In 1:4 Cement & Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials ,Labour And Tools And Plants Etc All Comp , 12 Mm Thick Plaster In Single Coat On Fair Side Of Single Or Half Brick Wall For Interior Plastering Up To Floor Two Level Including Etc All Comp , Centering And Shuttering Including Strutting Propping Etc All Comp , Reinforced Cement Concrete Works With Cement Approved Coarse Sand And 2 Cm (3/4) Gauge Approved Stone Ballast Etc All Comp , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work Etc All Comp , Supply And Fixing Inogration Board With Paidestal And Granite Board Etc All Comp , Providing And Laying Design Mix Cement Of M-30 Grade In Roads/Tax Tracks Runways Using Etc All completion , Construction Of Granular Sub Base (Gsb) By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Etc All Comp , Diposal Of Earth Up To 3.00 Km Including Loading & Unloading But Excluding Stacking On Pucca Road Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
6.
Public Administrative Department #11466090 Price Bid
Tender for Dismentaling Of Interlocking Tiles Etc All Comp , Earth Work In Cutting In Ordinary Soil Lead 30 Mt & Lift 1.5 Mtincl Lab T&P Etc All , Earth Work In Ecxavation In Ordinary Soil Lead 30 Mt& Lift 1.5 Mtincl Lab T&P Etc All Comp , Laying Of Base Concrete 1:6:12 With Cement C.Sand & 40 Mm Brick Ballast Etc All Cmp , Laying , Spreading And Commpaction Of Local Screened Sand N Water Logged Location For Construction Of Road Embankment Including Etc All Comp , S/L/J Of 350 Mm Dia Reinforced Cement Concrete Hume/Sw Pipe With Standard Jointing Material Cement & Spun Yam In Mortar Of Cement @ C/Sand Including Etc All Comp , Class-150 Brick Work In 1:4 Cement & Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And Tools And Plants Etc All Comp , 12 Mm Thick Plaster In Single Coat On Fair Side Of Single Or Half Brick Wall For Interior Plastering Up To Floor Two Level Including Etc All Comp , Construction Of Gsb Granular Sub Base By Providing Well Graded Material Spreding In Uniform Layers With Mortar Grader On Prepared Surface completion , Providing And Laying Of Rubber Moulded Interlocking Concrete Block With 80 Mm Thick Icbp ( 75% Gray & 25 % Red /Yellow Coloured) Etc All Cmp , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2 Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 ( 1 Cement:6 Aggregate) In Lintels Of Doors And Windows Etc All Comp , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work ( When Ot Include In Overall Rates) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work Etc All Comp , Supply And Fixing Of Inogaration Board Paidestal Etc All Comp , Construction Of Gully Pit As Per Design Of Knn Etc All Comp , Cartage Of Earth Up To 3 Km Including Loading & Unloading Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 9
Uttar Pradesh View Result →
7.
Public Administrative Department #11466088 Price Bid
Tender for Dismentaling Of Interlocking Tiles Etc All Comp , Dismantaling Brick Work Or Stone Work In Lime Or Cement Mortar And Including Stocking Of Materials As Directed Etc All Comp , Dismentaling Of Cement Concrete Etc All Comp , Earth Work In Ecxavation In Ordinary Soil Lead 30 Mt& Lift 1.5 Mtincl Lab T&P Etc All Comp , Laying Of Base Concrete 1:6:12 With Cement C.Sand & 40 Mm Brick Ballast Etc All Cmp , Class-150 Brick Work In 1:4 Cement & Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And Tools And Plants Etc All Comp , 12 Mm Thick Plaster In Single Coat On Fair Side Of Single Or Half Brick Wall For Interior Plastering Up To Floor Two Level Including Etc All Comp , Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement In Position To The Required Line Level And Curvature Jointed With Cement Mortar Etc All Comp , Construction Of Gsb Granular Sub Base By Providing Well Graded Material Spreding In Uniform Layers With Mortar Grader On Prepared Surface completion , providing and laying Of 125 Micron Plastick Sheet Providing Over Sub Base Etc All Comp , Providing And Laying Design Mix Cement Of M-30 Grade In Road/Tak Tracks Runways Using Cement Etc All Comp , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2 Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 ( 1 Cement:6 Aggregate) In Lintels Of Doors And Windows Etc All Comp , Mild Steel Or Iron In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work ( When Ot Include In Overall Rates) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work Etc All Comp , Sale Of Material To Contractor Old Brick Etc All Comp , Sale Of Material To Contractor Brick Bats Etc All Comp , Supply And Fixing Of Inogaration Board Paidestal Etc All Comp , Construction Of Gully Pit As Per Design Of Knn Etc All Comp , Raising Or Manhole Chamber Etc All Comp , Construction Of M.H Chamber 0.60X0.60X1.20 Etc All Comp , Cartage Of Earth Up To 3 Km Including Loading & Unloading Etc All Comp , Add 18% Gst
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
8.
Rural Development #11465735 Price Bid
Development Works At Shree Skhetra Jagdamba Devi Sanshtan At Sav. Tq. Dist. Buldana.- 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 2 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 3 Excavation for foundation in Hard murum including removing the excavated material upto a distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringand struttingetc. complete. (Lift from1.5 to3.0m.) By Mechanical Means 4 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 5 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 6 Providing and laying in situ /Ready MixCement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water,Steel centeringformwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 7 Providing and laying Cast in situ/Ready Mix Cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 8 F.F. 9 Providing and laying Cast in situ/Ready Mix Cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 10 F.F. 11 Providing and laying Cast in situ/Ready Mix Cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 12 F.F. 13 Providing and laying Cast in situ/Ready Mix Cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 14 F.F. 15 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 16 F.F. 17 Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwithtwocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. FF 18 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc. complete. 19 Providing fly ash brick masonry with conventional / I.S. type fly ash bricksin C.M. 1:6 in foundation and plinth includingbailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. 20 Providing and laying Cast in situ/Ready Mix Cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 21 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 22 F.F. 23 Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. FF 24 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . FF 25 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. FF 26 Providing and fixing 30mm thickPVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom railsandtwo19x19mm MStubesinsertedhorizontallyinsidethe hollowprofile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thickx20mmwidthonstilesandrailsusingsolventcement.Theinnerpanelshallbe laminatedwith5mm thicktermite proofwaterproof plain/prelam PVCsheet using solvent cementonthebothsidesofthepanelincludingstainlesssteelfixturesandfasteningetc. Complete as per direction of Engineer incharge, manufacturers specification and drawing. FF 27 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. 28 F.F. 29 Providing andfixing inposition(asper1868/1982)Aluminium sliding windowofthree tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeofbearingbottom40x18x1.25mmat weight 0.417Kilogram/One Running Metre.Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Runningmetre.andhandleandtopsection40x18x1.25mm atweight 0.417Kilogram/Runningmetre.Asperdetaileddrawingsandasdirectedby Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmthickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwithall required screws and nuts etc, complete. With powder coating without box 30 F.F. 31 Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,of approved quality etc. complete. FF 32 Providing and fixing foldable mild steel door using fully anodised sections of hollow square pipe 40 X 40 X 4 mm & 80 X 40 X 4 mm, M. S. sheet and grill as per drawing with all accessories etc. complete. (I.S. 105211983). [ Item as per Circular No. 1304 Dt. 24/02/23 33 Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, moulding edges, cleaning complete. a) Marble other than white makrana 34 F.F. 35 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. 36 F.F. 37 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 38 F.F. 39 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. 40 F.F. 41 Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. 42 F.F. 43 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete 44 F.F. 45 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete. 46 F.F. 47 Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. 48 F.F. 49 Providing and applying plastic emulsion paint of approved quality, colour and shade tonew surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. 50 F.F. 51 Providing and applying two coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 52 F.F. 53 Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and1.5mmthickattop, 40mm diameterand1.5mm thickverticalsupportsspacedat1.5m centertocenterand8mmthicktoughenedglassincludingfabricating,fixtures,errecting, necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete 54 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates oranglecleatsinmainandcrossbeams,hipandjackrafters,purlinsconnectingtotruss members andthe like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil paintingofapproved quality and shade etc. complete. 55 Providingandfixingcorrugatedgalvanisedironsheetsof0.63mmthick(24B.W.G.)for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 Kilogram/sq.m.). 56 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge 57 Royalty Charges for Metal and Murum 58 Royalty Charges for Sand 59 Fineness Modulus,Silt & Clay Content 60 Compressive Strength 61 Water Absorption. Compressive Strength. Efflorances 62 Gradation 63 Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final), Compressive Strength, Soundness 64 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 65 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 66 Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterialupto distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringandstruttingetc.complete.(Liftupto1.50m)ByMechanical Means 67 Excavation for foundation in Hard murum including removing the excavated material upto a distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringand struttingetc. complete. (Lift from1.5 to3.0m.) By Mechanical Means 68 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 69 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 70 Providing and laying in situ /Ready MixCement concreteM-20of trap / granite /quartzite/ gneissmetal for R.C.C. workin foundations like raft, strip foundations, grillage andfootings of R.C.C. columns and steel stanchionsetc. including bailing out water,Steel centeringformwork, laying/pumpingcover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 71 Providing and laying Cast in situ/Ready Mix Cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 72 Providing and laying Cast in situ/Ready Mix Cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 73 Providing and laying Cast in situ/Ready Mix Cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel) with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 74 ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-20oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem ifspecialfinishistobeprovidedandcuringcomplete.(Excludingreinforcementand structuralsteel).withfullyautomaticmicroprocessorbasedPLCwithSCADAenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 75 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 76 ProvidingandfixingheavydutyinterlockingconcreteRUBBERMOULDGLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaningetc. complete. (using 100% crushed sand) 77 Providing andlaying Castinsitu/ReadyMixcement concrete M-15oftrap/ granite/quartzite/gneissmetalforcoping to plinthorparapet,mouldedorchamferedasper drawingorasdirectedincludingsteelcentering,plywood/steelformworkcompacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) 78 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge 79 Royalty Charges for Metal and Murum 80 Royalty Charges for Sand 81 Fineness Modulus,Silt & Clay Content 82 Compressive Strength 83 Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final), Compressive Strength, Soundness 84 Gradation
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 5
Maharashtra View Result →
9.
Defence #11465339 Price Bid
Tender for Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Not Exc 1.50 Sqm Each And Removing From Site Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc 1.50 Sqm Eachand N Exc 4 Sqm And Removing From Site Complete All As Specified And Directed.. , Demolition Of Brick Work Built In Cement Mortar Including All Quions, Arches, Pillars Etc But Excluding Ashlar Facings Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Complete All As Specified And Ditrected. , Dismantling Of Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Any Description Or Thickness In Floors, Aprons Etc. Complete All As Specified And Directed. , Demolition Of Cement Concrete (Reinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Reinforcement Cut As Required To Facilitate Demoltion Complete All As Specified And Directed. , Taking Down Cement Plaster On Brick Or Stone Wall Etc Including Racking Out Joints, Hacking For Key Scrubbing Down With Water Etc To Receive New Plaster Etc.Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 125 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc. Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 105 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc Complete All As Specified And Directed. , S & F For 35 Mm Thick Factory Made, 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebeated And Prepared To Received Glass, Gauzed, With Out Sash Bar Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitered Beads For Securing Glass Etc, Size Of Member Of Shutter As Per Specified In Ssr Part-I Section 8, Clause 8.24 (A) And For Door And Fixed With Chowkats, Chemically Pressure Treated Complete All As Specified And As Directed. , S&F For 35Mm Thick 2Nd Class Hard Wood Plain, Framed Pannelled Shutters (Two Panel) With Lock Rail And Panel Of 9Mm Bwp Commercial Ply Or 12Mm Veneered Particle Board Wiyh Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per (Is : 1003 Part-I , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And As Directed. , S&F Powder Coated Aluminium Frame Work (Min Thickness Of Powder Coating 50 Micron) For Doors, Windows, Ventiltors And Partition, (Sliding/Openable/Fix Doors, Windows, Ventilator), Etc With One, Two Or More Rebates (Reqd As Per Site), Section Weighing Not Less Than 0.55 Kg/M, Including Joining Cleat For Fixing With Dash Fasteners Of Required Dia And Size, Incl Filling Up Gaps At Junctions, Ie Top, Bottoms And Sides Etc Complete All As Sspecified And Directed.. , S&Fpowder Coated Aluminium Window And Ventilator Shutters, Sliding/Openable/Fixed (As Per Required At Site) Type Without Sash Bar, Alu Section Weighing 0.55 Kg/M, Including Necessary Locking Arrangement, Guide Wheels, Joining Cleats, Glazing Clips Rubber Packing Anodised Alu Snap Beading Screws Etc Complete All As Specified And Directed. , S&F For Sheet Glass Palin/Coloured (As Per Directed By Engr-In-Charge) 3Mm / 5 Mm Thick Best Quality And Glazing With Rubber Packing, Screws Or Glass Putty In Squares Exc 0.5 Sqm Each Pane Complete All As Specified And Directed. , S & F For Stainless Steel Wire Cloth Of 0.36Mm Dia Wire And Average Width Of Aperture 1.40Mm & Fixed With Tacks Or Screws, Wire Staples, Etc Complete All As Specified And Directed. , S&F Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube With Wooden Grain Printed Pvc Sheet Used Inserted Of Plain Colour Pvc Sheet & Edges Will Be Painted To Match With Printed Sheet Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail. Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Complete All As Specified And Directed. , S&F 100 Mm Long Mild Steel Butt Hinges, Cold Rolled, Medium Weight Complete All As Specified And Directed. , S&F For 125Mm Long Anodised Aluminium Barrel Tower Bolt Of Extruded Section Complete All As Specified And Directed. , S&F 150Mm Long Anodised Aluminium Handles, Cast Type Complete All As Specified And Directed. , S&F300mm Long Aluminium Alloy, Anodized Sliding Door Bolt With Hasp Stapple ( Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy And Fixed Complete All As Specified And Directed. , S&F For 20 To 25 Mm Dia Stainless Steel Drapery Curtain Rod With Brass /Nickel Chrom Polish / Designer Lattos And Brackets Complete All As Specified And Approved By Engr-In-Charge Including Taking Out Old Pelmet With Curtain Rods Complete All As Specified And Directed. , S&F 300 Mm Long Mild Steel Ordinary Rat Tail Rod Pattern Spring Including Roller And Roller Plate Complete All As Specified And Directed. , S& F Floor Door Stopper Of Aluminium Alloy Body And Tongue ,Anodised ,With Hard Drawn Steel Spring ,Fixed In Floor Overall Length Of Cover Plate 140Mm Complete All As Specified And Directed. , S & F For Pvc And Cupboard Shelf/ Partition/ Frame / Shutter Of 18Mm Thick Side Of Panel Externally Impact Perfact Finish To The Shutter And Joined Together With Solvent Cement Adhesive 8Mm Thick (4Mmx2)X12mm Wide Pvc Sheet Is Used As Gap Insert For Top & Bottom Rail, 18Mm X 1Mm Pvc Edge Lipping Is Done On Top & Bottom Side Using Pvc Solvent Cement Adhesive, Incl Hasp And Stable For Locking Purpose, Etc Complete As Per Direction Of Engr-In-Charge, Manufactures Specification And Drawing Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc. 6M Mean Radius Built In Cement Mortor 1:6., Etc Complete All As Specified And Directed. , M & L For Brick Work With Sub Class B Modular Bricks, Straight Or Curved On Plan To Any Radius Built In Cm 1:4 In Half Brick Thick Walls Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick In Cm 1:4 On Other Than Fair Faces Of Brick Or Concrete Surface With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed.(Note:- Liquid Water Proofing Compound To Be Measured Paid Separately) , M&L For Rendering 5Mm Thick In Ceiling Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , Supply Only Integral Water Proofing Compound Complete All As Specified And Directed. , M & L For Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , M&L Plain Cement Concrete 1:4:8, Type D2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor Complete All As Specified And Directed . , M & L 25Mm Thick Cement Concrete Type B-0, 1:2:4 (Using 12.5 Mm Graded Aggregate) For Levelling Course In Floors Complete All As Specified And Directed. , M&L For Scratch Free Vitrified Light Shade Floor Tiles 10Mm Thick (Square Or Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm ,In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With And Including 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directed. , All As Per Item No 35 Above But As In Skirting/ Dado Etc With And Including 10Mm Thik Backing Coat In Cement Mortar 1:4 An Wall Complete All As Specified And Directed. , M & L For Non Skid Joint Free Coloured Ceramic Floor Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exc 0.11 Sqm But N Exc 0.18 Sqm,In Floor Etc Set & Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With 15Mm Thick Screed Bed Or Bedding Layer In Cm (1:6) Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Wall Tiles (Textured And Design As Required) In Vertical Surface 450X300x7mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Rendering In 1:4 Cm Complete All As Specified And Directed. , M & L For Applying Two Coat Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. , M & L For Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Cement Primer And Over A Coat Of 2 To 3Mm Thick Wall Care Putty Complete All As Specified And Directed. , M & L For Preparation Of Newly Plastered Surfaces Of Walls And Applying Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gms/Litre, Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per Manufacturers Specification. Two Or More Coats On New Work Over A Coat Of Wall Care Putty 3Mm Thick Complete All As Specified And Directed. , Material And Labour For Apply Two Coats Of Anti Fungal Weather Coat Acrylic Emulsion Paint Over A Coat Of Primer On New Surfaces Including 2 -3 Mm Thick Wall Putty, Complete All As Specified And Directed. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Claim On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M & L For Preparing New Plastered Surface On Ceiling And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surface Including Complete Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Applying Two Coat Of Oil Bound Distemper On Walls Over 2Mm Thick Plaster Of Paris Putty As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surface Including Complete Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) On Walls Over 2Mm Thick Plaster Of Paris Putty As Specified And Directed By Engr-In-Charge. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Claim On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M&L For Three Coat Of White Wash On Old Surface On Ceiling Including Preparation Of Surface Complete All As Specified And Directed. , M & L For Machine Cut Kota Stone Slab Flooring 20 To 25Mm Thick (Size Not Less Than 550Mm X 550Mm) Laid & Jointed With Grey Cement Mixed With Pigment To Match The Shade Of Slab Including Rubbing And Mirror Polishing Finished Laid Over And Including 20Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And As Directed. , M & L For Machine Cut Kota Stone Slab Flooring 18 To 20Mm Thick As In Riser Of Step, Dado And Skirting Over And Including 10Mm Thick 1:4 Cm Backing Coat On Vertical Surface Of Wall With Rubbing And Mirror Polishing Finished Complete All As Specified And As Directed. , M&L Plain Cement Concrete 1:3:6, Type B1( Using 20Mm Graded Stone Aggregate) 75Mm Thick As In Plinth Protection Complete All As Specified And Directed . , Demolition Of Cement Or Lime Concret In Any Despription Along With Tarfelt Treatment In Sunken Portion / Roof And Cement Mortar Bedding From Roof Removal Rubbish Out Side Md Land Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:2:4 Type B-0 Using 12.5Mm Graded Crushed Stone Aggregate As In Sunken Portion, Subbase, Etc Complete All As Specified And As Directed. , M&L For Rendering 10Mm Thick In Cm 1:4 On Roof Suraces With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Water Proofing Treatment To Sunken Portition / Roof Etc. In Following Sequence:- (I) Properly Cleaning And Drying The Surface (Ii) Applying A Coat Of Bitumen Primer @ 1.2Kg/Sqm And Primer Shall Be Allowed To Dry Over Night. (Iii) Laying App Based Modified Water Proofing Membrane Of Weight Not Less Than 3Kg Per Sqm And Thickness Not Less Than 3 Mm, With 100Mm Overlaps, Sealed And Bonded To The Surface By Torchon Method (Iv) Applying Two Coat Of Bituminous Based Aluminum Painting @ 0.15 Kg/Sqm Each Coat On Water Proofing Treatment With Preparation Of Surfaces Complete All As Specified And Directed. , S&F Vitreous China Wash Down Water Closet Pan Semi Pedestal Pattern(Anglo Indian Type), White (Excluding Fixing Bolts, Flushing Cistern And Flush Pipe(Excluding Flushing Cistern And Flush Pipes) Including Connection To Trap And To Flush Pipe Etc And Lime Concrete Bedding Including P Or S Trap Complete All As Specified And Directed. , M&L In Repairs Pvc Valve Less,Syphonic Action Type Flushing Cistern,Low Level ,White With Inlet Ball Valve,Float And Handle Including Brackets And Connection To Pipe And Fixing Of Chain And Pull Or Lever If Any Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back, Size 550X400 Mm Including Bracket, Taps ,Waste Pipes , Chain And Plug Etc Complete All As Specified And Directed. , S & F In Repairs Pvc (Swr) Nani Trap / Floor Trap Plain Or Multi With Stainless Steel Grating Incl Joining To Waste Pipe With Solvent Cement Joint Dia Of Outlet 75Mm Bore Complete All As Specified And As Directed. , S&F In Repair 110Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S&F In Repair 75Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S & F In Repair 110 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repair 75 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repairs 110Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , S & F In Repairs 75Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , M & L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Not Exc 10Cm Girth Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Dia Old Serviceable / Unserviceable Steel Tubing Any Grade And Connections Cleaning For Re-Fixing Or Removal To Store Complete All As Specified And Directed . , All As Per Item No 65 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F Steel Tubing Medium Grade ,Galvanized With All Fitting Such As Bend ,Elbow, Socket,Tees,And Fixed Complete To Wall Or In Ceiling Or In Floors Including Cutting Threading And Making Forged Bends On Pipes Ms Hooks Etc ,For 15Mm Bore Pipes Complete All As Specified And As Directed. , All As Per Item No 67 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F In Repair For 15Mm Bore Bib Taps Chromium Plated With Crutch Or Butterfly Handle ,Screwed Down , Screwed For Iron Pipes Or Brass Ferrule Complete All As Specified And Directed. , S&F In Repair Cp Angle Stop Cock Of 15Mm Bore Screwed Down For High Pressure With Crutch Or Butter Fly Handle ,Screwed Both End For Iron Pipes Complete All As Specified And Directed.. , S&F In Repair Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe 15Mm Bore Complete All As Specified And As Directed. , S&Fixed In Repair 125 Mm Size Chromium Plated Shower Rose With Siwel Joint Suitable For 15 Mm Bore Gi Pipes Complete All As Specified And Directed. , S&F In Repairs Pvc Connection 15Mm Size With Ptmt Nuts Of Length 450 Mm Long Complete All As Specified And As Directed. , S& F In Repair Rotational Moulded Polyethylene Water Storage Tank 1000 Liters Capacity (Cylidrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Incl Brass Float Valve 20Mm Dia And Dismantling Water Tank Complete All As Specified And Directed. , S & F In Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats (Minimum Weight 300 Grams) Complete All As Specified And Directed. , S&F In Repair Stop Valves Fancy Type Chromium Plated With Long Shanks Fixed With 15 Mm Dia Bore Pipes Complete All As Specified And As Directed. , M & L High Strength Steel Deformed Tmt Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping Columns,Hookings Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.90 Mm Dia Or Securing With Clips, Etc Complete All As Specified And Directed. , M & L For Formwork Fair And Finished Surfaces To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Bands, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Complete All As Specified And Directed , M&L Reinforced Cement Concrete M-25 Using 20 Mm Graded Stone Aggr As In Beams, Bands, Cantilvers, Bressummers, Linters, Chajjas, Etc Over 1.5M Span Etc Complete All As Specified And Directed , Demolition And Breaking Up 150Mm Dia Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete ) And Set In Cement Mortar Complete All As Specified And Directed. , M&L For Concrete Bed To Drain Pipes Including Packing Under, And Haunching Against The Sides Of 150 Mm Bore Pipes In Cement Concrete 1:3:6 Type C-2 ( Using 40 Mm Graded Stone Aggregate) After They Are Laid And Tested Complete All As Specified And Directed. , M&L For 150 Mm Bore Salt Glazed Stone Were (Sgsw) Drain Pipe Grade A Laid To Slope In Tranches And Jointed In Cement Mortar (1:1) Including Necessary Testing For Ensuring Teak Proofing Complete All As Specified And Directed. , M & L For Cutting Into Existing Manhole For Connecting New Drains And Making Good To Pipes And Rendering Cutting Out Existing Benching For And Forming Branching For And Forming Branch Channel (1/2 Round Or ¼ Section ) In Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate Smooth Finished And Reforming Benching As Specified And Directed For 150Mm Dia Of Pipe Complete All As Specified And Directed. , M&L Plain Cement Concrete 1:4:8, Type B2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor Complete All As Specified And Directed . , M&L For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block (Glossy Finish) Of M-35 Gde Of Approved Shape, Size And Colour Conferming To Is 15658-2006 And Laid Over And Including 25Mm Thick Grid Cushion Complete All As Specified And Directed. , S & F For Precast Cement Concrete Type B-1 (1:2:4) (20Mm Graded Stone Aggregate) As In Kerb And Edging To Road And Footpath Etc, Including Chamfered, Weathering, Throating Etc And Setting In Cm (1:4) Complete All As Specified And Directed. , S & F In Repairs Ms Framed Work As In Doors Or Gates Of Angle Iron, Door Frame Or Other Section With Gusset Plate, Rails, Braces And Stair Case Etc Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering Etc, To Prepared For Hanging Or Sliding With Including Either Hooks And Hinges Also Fastening Grills, Grating, Hold Fast Of Doors And Windows Chowkat Etc, With Ends Of Bars Shouldered And Or Riveted, Or Forget Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework Of Water Tanksand Fixing And Similar Work Confirming To Fe 290 Gde E-165 Complete All As Specified And As Directed. , M&L For Preparation Of New Steel Surfaces Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , Excavation In Trenches N.Exc 1.5M Wide And N.Exc 1.5M In Depth For Foundation Or Etc, For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc N.Exc 10 Sqm On Plan And N.Exc 1.5M In Depth And Getting Out In Soft/Loose Soil, Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:4:8 Type D2, Using 40Mm Graded Stone Aggregate, As In Foundation Filing, And Mass Concrete , Etc Complete All As Specified And Directed , Removing Excavated Material (Soil) To A Distance Not. Exc. 50 Mtr And Depositing Where Directed At A Level Nexc 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. , M & L Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate) As In Coping, Bearing Course, Manhole/ Drain Channels Etc In Including Necessary Formwork Complete All As Specified And Directed. , M&L For Cement Concrete 1:3:6 Type C-1 Using 20 Mm Graded Stone Aggregatre As In Surface Channels And Drains Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel Exc 30 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms Moulds, Mitred/Stopped Ends Etc Complete All As Specified And Directed. , M & L For Preparing New Plastered Surface On Walls And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M & L 20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite With Providing 15Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And As Directed.. , S&F In Repairs Standard Size Ewc White Colour With P/S Trap White Coloured With And Including Pvc White Coloured Seat Cover Including All And Connecting To Flushing Cistern Complete All As Specified And Directed. , Supply And Fixing Health Faucet Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete All As Specified And Directed. , S & F In Repair Soap Dish With Including Chromium Plated Brass Screws And Wooden/Plastic Cleats ( Minimum Weight 105Gm). Complete All As Specified And Directed. , S & F In Repair Tubular Towel Rail 20Mm Dia 600Mm Long Of Brass Chromium Plated Fixed With Including Chromium Plated Brass Screws And Wooden/Plastic Cleats Complete All As Specified And Directed. , Dismantling Of Asbestos Cement (Corrugated, Semicorrugated, Etc.) Sheets In Roof Covering Incl Ridges Etc Complete All As Specified And Directed. , S&F 0.50Mm Thick (Total Coated Thickness) Pre-Colour, Pre-Profiled Galvalume Sheets Of Required Colour And Design Having Tensile Strength Of 550 Mpa As In Roof, Wall Cladding, North Light Curves, Fixed With Zinc Coated Self Drilling Fastener Including Epdm Washer Complete Laid With One Corrugation Side Laps And Min 150Mm End Lap Laid To Slope All As Per Manufacturer/Profile Maker Instruction Complete All As Specified And Directed. , S & F Pre - Painted Galvalume Aluminium Zinc Coating Plain Sheeting 0.50 Mm Thick Of Required Colour And Shape Having Tensile Strength Of 550 Mpa As In Ridge Valley,Gutters,Barge Board,Roof Covering / Cladding To Wall, Fixed With Self Tapping Screwes Complete All As Specified And Directed. , S & F 600Mm X 450Mm Size Beveled Edge Mirror Of 6Mm Thick Selected Quality Mounted On 6Mm Thick Plywood With Chromium Plated Screws With Washer Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M )Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M )Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Jammu And Kashmir View Result →
10.
Public Administrative Department #11465012 Price Bid
Tender For Supply Of Construction Material And Providing Equipments In Nrega /Vb G Ram G And Other Scheme At Gram Panchayat Sajjan Ka Par Panchayat Samiti Ramsar For Fy2026-27Up To 31 March 2027- A Cement B Iron Materials C Cc Blocks D Other Construction Materials E Electrical And Sanitary Items F Other Equipment, Etc. Supply Of Construction Material-1 Gravel / Pebbles / Coarse Aggregate 2 Mud Mortar / Fine Mortar Mix 3 Kiln-Burnt Lime For Lime Masonry Work 4 Cement 4.1 Ppc (Portland Pozzolana Cement) 4.2 White Cement 5 Fine Aggregate 5.1 Sand / Grit 5.2 Local Grit / Gravel 5.3 Fly Ash 5.4 Surkhi (Pulverized Brick Dust) 5.5 Stone Dust (For Masonry Work) 6 Stone / Brick Aggregate (For Works Other Than Roads) 6.1 40Mm Stone Aggregate (Hand-Broken) (Deduct 1/11 For Voids) 6.2 40Mm Stone Aggregate (Crusher-Broken) (Deduct 1/11 For Voids) 6.3 20Mm Stone Aggregate (Crusher-Broken) : 6.4 12/10/6Mm Stone Aggregate (Crusher-Broken) 6.5 Brick Aggregate 7 Materials For Road Works (Including 5 Km Lead) 7.1 63-40 Mm Crusher-Broken Stone Aggregate (Deduct 1/11 For Voids) 7.2 63-40 Mm Hand-Broken Stone Aggregate (Deduct 1/11 For Voids) 7.3 90-45 Mm Hand-Broken Stone Aggregate (Deduct 1/11 For Voids) 7.4 Quarry Rubble (Deduct 1/6 For Voids) 7.5 Gravel (Voids Deducted 1/6) 7.6 Coarse Aggregate (Voids Deducted 1/6) 7.7 Binding Material (Pi 4-6) (Voids Deducted 1/6) 8 Bricks (22.5 X 11 X 7.50 Cm) 8.1 First Class 8.2 Second Class 9 Soling / Paving / Masonry Stone 9.1 Rubble Masonry (Rr) 9.2 Coursed Rubble Masonry (Cr) 9.3 Paving Soling (For Flooring Work Up To 15 Cm Thickness) 9.4 Paving Soling (For Road Paving Work Up To 23 Cm Thickness) 9.5 Jodhpur-Type Stone Slabs / Arches / Fragments (Length 2-3 Ft Width 10-12 In Thickness 2.5-3.5 In) 9.6 10 Flaky Stone Chips (Flaky Material) (3-4 Thick Length And Width 1-2) Sandstone (Dpc Sill Coping Lintel Tand Almirah Etc.) 10.1 Up To 25Mm Thickness 10.2 25Mm To 40Mm Thickness 10.3 40Mm To 50Mm Thickness 10.4 50Mm To 75Mm Thickness 10.5 75Mm To 100Mm Thickness 10.6 100Mm To 150Mm Thickness 11 Flooring / Slab-Laying Stone Slabs 11.1 Flooring Slabs: Up To 35Mm Thick Min. Area Of ​​3 Sq. Ft. Or More 11.2 Slabs For Roofing/Laying: 60-75Mm Thick Min. Area Of ​​3 Sq. Ft. Or More 11.3 Rough Kota Stone (Unpolished) 11.3.1 Up To 900 Sq. Cm 11.3.2 From 901 To 2300 Sq. Cm 11.3.3 Greater Than 2300 Sq. Cm 11.4 Polished Kota Stone (Polished On One Side) 11.4.1 Up To 900 Sq. Cm 11.4.2 From 901 To 2300 Sq. Cm 11.4.3 Greater Than 2300 Sq. Cm 11.5 Marble Stone (Makrana Adanga 20Mm Thick) 11.5.1 From 901 To 2300 Sq. Cm 11.5.2 Up To 900 Sq Cm 11.5.3 Exceeding 2300 Sq Cm 11.6 Marble Chips 11.7 Marble Powder 11.8 Marble Stone (Rajnagar Ii Quality / Local 20Mm Thick) 11.8.1 From 901 To 2300 Sq Cm 11.8.2 Up To 900 Sq Cm 11.8.3 Exceeding 2300 Sq Cm 12 Stone Door Frames 12.1 Single Rebate Size 100 X 75 Mm 12.2 Double Rebate Size 125 X 75 Mm 13 Stone Slabs 13.1 Up To 1.5 M Length Minimum 40Mm Thick 13.2 1.5 M To 2.40 M Length Minimum 50Mm Thick 13.3 2.4 M To 3.0 M Length Minimum 65Mm Thick 13.4 Above 3.0 M Length Minimum 75Mm Thick 14 Precast Tiles / Blocks 14.1 Glazed Size 30 X 45 Cm 14.2 Mosaic Size 40Mm Thick 14.3 Vitrified Size 60 X 60 Cm 15 Interlocking Tiles / Bricks / Blocks For Road Work 15.1 Cement Interlocking Block M-30 Grade 60Mm Thick 15.2 Cement Interlocking Block M-30 Grade 80Mm Thick 15.3 Cement Interlocking Block M-30 Grade 100Mm Thick 16 Fr Pvc Insulated Copper Conductor Single Core Cable (Isi Marked) 16.1 1.50 Sq. Mm 16.2 2.50 Sq. Mm 16.3 0.50 Sq. Mm 16.4 1.00 Sq. Mm 16.5 4.00 Sq. Mm 16.6 6.00 Sq. Mm 17 Local Timber (Including Fittings) (For Doors Windows And Furniture) 17.1 Mango 17.2 Acacia (Babool) 17.3 Others 17.4 Factory-Made Doors (30 Mm Thick Solid Core Single Leaf) 18 Structural Steel 18.1 Iron (Tor Steel Fe 415/500 For Reinforcement) 18.2 Binding Wire (18 Gauge) 18.3 Iron Girders 18.4 Angle Iron / Square Bar / Flat Strip / Angle Iron+ 18.5 Barbed Iron Wire (Size: 12 Gauge Wire And 12 Gauge Strand / 12 Gauge Wire And 14 Gauge Strand / 14 Gauge) 19 Wire Mesh 19.1 Iron Wire Mesh (24 Gauge 14 Mesh) 19.2 Cement Concrete Mesh (Reinforcement) — 40 Mm Thick 20 Glass 20.1 3 Mm Thick Glass 21 Paints & Finishes 21.1 Enamel Paint 21.2 Distemper (Water-Bound) 21.3 Lime — For Whitewashing (Aras / Kali) 21.4 Primer (For Iron / Wood) 22 Petroleum Products 22.1 Diesel (Hsd) 22.2 Mobil Oil 1 22.3 Bitumen Shalitex Board (25 Mm Thick) 23 Plain Sheets 23.1 G.I. Sheet — 22 Gauge (0.80 Mm) 23.2 G.I. Sheet — 24 Gauge (0.63 Mm) 23.3 M.S. Sheet — 22 Gauge (0.80 Mm) 23.4 M.S. Sheet 24 Gauge (0.63 Mm) 24 Corrugated Sheets 24.1 G.I. Sheet (Mm Thick) 24.2 G.I. Sheet 22 Gauge (0.80 Mm) 24.3 Asbestos Cement Sheet 6 Mm (2.5/2.75 X 1 M) 25 Other Sheets 25.1 S.W. Chahar Modi (Plain) 25.2 S.W. Bend (183X90) 26 26.1 G.I. 15 Mm (B Class) 26.2 20 Mm (B Class) 26.3 25 Mm Diameter (B Class) 26.4 A.C. 75 Mm Diameter 26.5 A.C. 100 Mm Diameter 26.6 S.W. 90 Mm 26.7 S.W. 110 Mm (With Fittings) 26.8 Pvc 140 Mm (With Fittings) 26.9 Ppr 110 Mm (2.5 Kg/Sq. Cm) Including Fittings 27 Sanitary 27.1 Indian W.C. 27.2 Orissa W.C. 27.3 European W.C. [Materials For The Above Items] 27.4 Foot Rest 27.5 Ceramic Urinal (430X350X300 Mm) [With] Brackets Waste Pipe 27.6 Wash Basin (450X300 Mm) [With] Brackets Waste Pipe 27.7 S.W. Pipe (100 Mm Diameter 0.6 M Long) 27.8 C.P. Pillar Cock (15 Mm Dia) (Is Mark) 27.9 C.P. Bib Cock (15 Mm Dia) (Is Mark) 27.1 125 Mm Diameter C.P. Grating 28 R.C.C. Np3 Hume Pipe (Spigot & Socket) 28.1 1200Mm Diameter 28.2 1000Mm Diameter 28.3 750Mm Diameter 28.4 600Mm 28.5 450Mm Diameter 28.6 300Mm 29 Steel Conduit (Isi Marked) 29.1 20 Mm Diameter 29.2 25 Mm Diameter 30 Charcoal 31 Pvc Water Tank (Conforming To Is:12701-1989) 32 13/0.20 Mm Stranded Pvc-Insulated Flexible Copper Cable 33 Steel Flat (6 Mm X 75 Mm) 34 Pvc Conduit (Isi Marked) 34.1 25 Mm Diameter 34.2 20 Mm Diameter 35 Junction Box 35.1 20 Mm (Deep) 35.2 20 Mm (Shallow) 35.3 25 Mm (Deep)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
11.
Defence #11456122 Technical Bid
Tender for Contract Details , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings N.Exc 15 Cm Thickness (Below Or Above |Ground Level) And Removing Rubbish Material Outside Mod . Complete As Specified And Directed By Engr-In-Charge. , M&L For Roughenig Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust & Brushing Neat Cement Slurry With 3 Kgs Of Cement Per Sqm Wtc All As Specified & Directed By Engr-In-Charge. , M&L For Cement Concrete Work In Pavement/Hard Standing Of Flexural Strength 40 Kg Per Square Centimeter In Field Using 400 Kg Of Cement Per Cubic Metre, Thickness Of Concrete 25 Cm Or Less And Finishing Surface Of Concrete Roads, Pavements By Brooming Complete All As Specified And Directed By Engr-In-Charge. , M&L For Forming 20 Mm Thick Expansion Joints Filled With Pre Formed Bituminous Filler And 30 Mm Primed And Sealed With Sealing Compound Grade A For 150 Mm Thick Concrete Slab Complete All As Speciied And Directed By Engr-In-Charge. , Supply And Fixing In Repair Metal Tubular Dealineator Made Out Of Abs Round Body Fitted With 2 Nos 65 Mm Dia Highly Reflective Reflectors Made Out Of Pmma And Mounted On 45/50 Mm Dia Mild Steel Pipe Of 600 Mm Height Duly Powder Coated And Thermo Plastic Elastomer 3 Bands Of Green, Red And Yellow Reflector Radium Tape Of 25 Mm Wide Strips With Anti Theft Steel Net For Reflector Protection Including Embedding In Plain Cement Concrete 1:2:4 (150X150x300mm) Type B1 Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fixing In Repair Cat Eye Solar Reflective Type Of Metal Body Alloy Of Size 100Mm X 100Mm X 20Mm With Pama Striplens Reflector Of Model No. Da 972.0 Fixed With And Incl Ms Stud Of Suitable Size As Per Manufactures Instructions As Specified And Directed. , Removing Building Materoals Etc To A Distance Of 5 Km Or Under, Beyond The Lead Included In Rates, Including Loadoing, Unloading And Stacking At The Destination , Dismantling Of Stone Slabs And Tiles Of Any Description Or Thickness Laid Bedded And Pointed In Any Mortar In Floor, Aprons Etc And Including Disposal Of All Debris Exc 1.5 Kmtr Not Exc 5 Km. , Providing And And Laying 80Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-30 Grade With Approved Colour, Design & Pattern As In Footpath, Parks, Lawns, Drive Ways Or Light Trafficparking Etc., Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over And Including 50Mmn Thick Compacted Bed Of Coarse Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Fine Sand And Cutting Of Paver Block As Per Required Size And Pattern, Finishing And Sweeping Extra Sand; Complete All As Specified And Directed. , M&L For Preparation Of Old Stone, Concrete Surfaces & Applying One Coat Of Synthetic Enamel Paint Of Any Description Over 10Cm Girth Or Width, Not Otherwise Described Complete All As Specified And As Directed. , S&F In Repair For Factory Made Plain Cement Concrete Kerb Stone Of Size 300 X 460X150mm , Laid In Position To The Required Line, Level And Curvature, Jointed With Cement Mortor 1:3 Including Making The Joint With Or Without Grooves Including Making Drainage Opening Where Ever Required Comlete All As Per Direction Of Engineer-In-Charge. , M&L For Plain Cement Concrete 1:2:4 , Type B1 Using 20Mm Graded Stone Agg As In Benching And Coping, Apex Stone Etc, All As Specified And Directed. , M&L For Painting Of Two Coats Synthetic Enemal Paint Over Kerb Stone In White/Yellow/Black Shades Including Priming Coat And Cleaning/Preparation Of The Surface Complet All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Uttarakhand View Result →
12.
New and Renewable Energy #11454900 AOC
Bids Are invited for Title1 - Wall painting with acrylic emulsion paint , Title2 - Providing and applying white cement based , Title3 - Finishing walls with Acrylic Smooth exterior paint , Title4 - 15 mm cement plaster , Title5 - Neat cement punning , Title6 - Providing and fixing bright finished brass hanging type floor door stopper , Title7 - Painting with synthetic enamel , Title8 - Applying one coat of water thinnable cement primer , Title9 - 6mm cement plaster , Title10 - Providing and fixing Ist quality ceramic glazed wall tiles , Title11 - White washing with lime , Title12 - Clearing and stripping the site , Title13 - Supply and transport of earth , Title14 - Earth work in excavation , Title15 - Providing and laying in position specified grade of PCC , Title16 - Providing and laying in position specified grade of reinforced cement concrete , Title17 - Steel reinforcement , Title18 - Centering and shuttering , Title19 - Structural steel work riveted , Title20 - Providing and fixing ISI marked flush door shutters , Title21 - Providing and fixing concertina coil fencing , Title22 - With GI barbed wire , Title23 - Providing and fixing GI chain link fabric , Title24 - Removal of wet dry sludge , Title25 - Removal of existing damaged glass , Title26 - Welding by gas or electric plant , Title27 - Removal of existing damaged door , Title28 - Dismantling colour coated roofing Sheets , Title29 - Rectifying all defects causing leakage in pre coated iron profile roofing sheets , Title30 - Providing and fixing precoated galvanised iron profile sheets , Title31 - Demolishing RCC work by mechanical means , Title32 - Supplying and applying bituminous solution primer , Title33 - Random rubble masonry , Title34 - Brick work with common Fly ash bricks , Title35 - Providing and injecting chemical emulsion , Title36 - Half brick masonry , Title37 - Providing and fixing white vitreous china pedestal type water closet , Title38 - Providing and fixing wash basin , Title39 - Providing and fixing beveled edge mirror , Title40 - Providing and fixing CP brass bib cock , Title41 - Providing and fixing CP brass stop cock , Title42 - Providing and fixing water closet squatting pan , Title43 - Providing and laying Ceramic glazed floor tiles , Title44 - Providing and fixing on wall face un plasticised Rigid PVC SWR pipes , Title45 - Providing and placing on terrace polyethylene water storage tank , Title46 - Providing and fixing inposition collapsible steel shutters , Title47 - Providing and fixing PTMT pillar cock , Title48 - Providing and laying Bituminous concrete , Title49 - Sub-base course , Title50 - Base course , Title51 - Providing and fixing brass 100mm mortise latch an dlock with 6 levers , Title52 - Developing lawn , Title53 - 30 mm thick factory made Polyvinyl Chloride , Title54 - Providing and fixing GI chain link fabric , Title55 - Do GI Pipe 25m dia , Title56 - 32 mm dia nominal bore , Title57 - 50 mm dia nominal bore , Title58 - Providing and fixing false ceiling , Title59 - Supplying and filling in plinth , Title60 - Providing and laying dampproof course , Title61 - Finishing with Epoxy paint , Title62 - Providing fixing glass panes , Title63 - Providing and laying vitrified floor tiles , Title64 - Providing and laying Polished Granite stone , Title65 - Providing and fixing Stainless Steel , Title66 - Providing and fixing Stainless Steel 24 inch Towel Rod , Title67 - Providing and fixing of Overhead Shower , Title68 - Providing and fixing of Shower Arm Casted Chrome , Title69 - Providing and fixing with all fittings of Angle Cock , Title70 - Providing and fixing with all fitting of two way bib Cock , Title71 - Providing and fixing with all fitting of Float valve , Title72 - Constructing masonry Chamber , Title73 - Dry stone pitching , Title74 - Providing and fixing gun metal gate valve , Title75 - Providing and laying 60mm thick faciory made cement concrete interlocking paver block Total Quantity : 14934
Contract Date: Ref. Documents Contract Value : 34.73 Lakh
Boards / Undertakings / PSU No of Bidders 2
Andhra Pradesh View Result →
13.
Science and Technology #11440503 Technical Bid
Tender for Earth Work , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lif. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Cement Concrete (Cast In Situ) , Providing And Laying In Position Excluding Cement Concrete Of Level: Specified Grade The Cost Of Centering And Shuttering - All Work Up To Plinth 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Stone Work , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :Cement Mortar 1:6(1 Cement : 6 Coarse Sand) , Cladding Work , Providing Edge Moulding To 18Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge,Granite Work , Wood And P. V. C. Work , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing 40X5 Mm Flat Iron Hold Fast 400 Mm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 300X100x150 Mm 1:3:6 Mix (1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For (I) Sites With Basic Wind Speed 45 M/Sec As Per Is 875 - Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speedscasement Window Double Panels With Fixed Mullion With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above) & Sash (39 Mm & Above) X (60 Mm & Above) & Mullion (39 Mm & Above) X (60 Mm & Above). (Height Upto 1.2 Metre). , Steel Work , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Flooring , Providing And Laying Vitrified Tiles In Floor In Diferent Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Double Charge Vitrified Tile Polished Finish Of Size Of Tile 600 X 600 Mm , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Finishing , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Coarse Sand) , 6 Mm Cement Plaster 1:3 (1 Cement: 3 Fine Sand) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of Reinforced Cement Concrete Slabs And Beams. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , 12 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 (1 Cement: 4 Fine Sand):Moulded Band , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Itr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work , French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content.With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre , Dismantling And Demolishing , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:3:6 Or Richer Mix (Including Equivalent Design Mix) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Aluminium Work , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete.Upto 5 Mm Depth And 5 Mm Width , Market Rate Items , Provinding Precast Cement Concrete Solid Block Masonry Including Hoisting And Setting In Position With Cement Mortar 1:6 (Cement :6 Coarse Sand) Completed As Per The Direction Of Engineer In Charge As Per Site Condition , Providing And Fixing 5 Mm Thick Clear Transparent Acrylic Sheet Of Approved Brand And Manufacture For Fixed Curved Portions In Openings, Including Epdm Rubber/Neoprene Gasket And All Necessary Accessories, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Electrical Work , Laying And Fixing Of One No Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Upto 35 Sq.Mm (Clamped With 1Mm Thick Saddle) Size On Wall Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 4 X 16 Sq. Mm (25Mm) Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. , Supplying And Fixing Of 4 Way (4 + 12), Double Door Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs As Required . , Supplying And Fixing 6 Way, Double Door, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator. , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole And Neutral , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole And Neutral , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.4 X 6 Sq. Mm + 2 X 6 Sq. Mm Earth Wire , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 6 Module (200Mmx125mm) , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 5/6 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 15/16 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 15/16 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Bell Push , 2M Stepped Type Electronic Fan Regulator , Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Group Controlled (Looped) Light Point/ Fanpoint/ Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit,And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. (Group-C) , Providing And Fixing 6 Swg Dia G.I Wire On Surface Or In Recess For Loop Earthing As Required. , Supplying, Installation, Testing & Commissioning Of Photo Electronic Smoke Detector With Builtin Led And Mounting Base Plate Suitable With Ms Junction Box For Operation On 12V / 24V Complete With All Connections Etc. As Required. , Supplying, Installation, Testing & Commissioning Of Manual Call Box Of Abs Type In Surface/Recess With Stainless Steel Chain & Hammer Assembly Complete With Glass And Push Button Etc. As Required. , Supplying & Laying Of 2 X 1.5 Sqmm Fire Alarm Armoured Cable, 600/1000V Rated With Annealed Copper Conductor Having Xlpe Insulation, Steel Wire Armouring & Frls Outer Sheath Complete As Required. , Supplying And Fixing Dp Sheet Steel Enclosure On Surface / Recess Along With Upto 32A, 240 V, C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Spmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep,Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Speed Control Compitable For Electronic Type Regulator And All Remaining Accessories Including Safety Pin,Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Including Fixing Fan Hook In Ceiling Complete As Required. , Supplying, Installation, Testing & Commissioning Of Panel Light 2X2 Ft.,40W Of Powder Coated Die Cast / Extruded Aluminium Body (Thickness ≥ 1.20 Mm) Body Material And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency 85%, Operating Voltage Ac 140 270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection, Thd 10% , P. F.≥0.95, Ip20, Cri 80, Ugr (Unified Glare Rating) 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With, 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11Report, Cct 5700°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. System Lumen Efficacy ≥105 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. , Supplying And Fixing Of 25Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Drawing 1 Run Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended/Surface Mount From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 V, Complete As Required. , Supplying And Fixing Fp Mcb Sheet Steel Enclosure With Din Rail On Surface / Recess Etc. As Required. , Supplying & Fixing Of 4Pole, 63 A Rating, 415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 16Sq.Mm, Aluminium , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 6Sq.Mm, Copper , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,3C X 4 Sq.Mm, Copper , Supply And Laying Of Un Armoured Copper Single Core 10 Sq.Mm Flexible Cable With Annealed Copper Conductor In Suitable Size Hdpe Pipe In Ground/ On Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.4 X 6 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.3 X 4 Sq.Mm , Supply ,Installation, Testing And Commissioning Of 2 Tr/24000Btu Per Hour And Bee-5 Star Rated Wall Mounted Inverter Type Hi Wall Split Cooling Air Conditioner Having Wireless Remote Controller, Hermetically Sealed/Scroll/Rotary Compressor And Eco Friendly Refrigerant,Initial Charge Of Refrigerant,Condensor And Evaporator Coils Of Copper Material, Air Filter With Auto Swing & Auto Restart Features, Suitable For Operation On 230V, Single Phase, 50Hz, Ac Power Supply. The Indoor Unit Shall Be Fixed Rigidly On Wall Using Necessary Frame, The Outdoor Unit Shall Be Mounted On Wall Or Floor Using Suitable Powder Coated Ms Angle Frame As Required. Including Clamps, Bolts, Nuts,Vibrating Dampers, Laying Of 3 Meter Standard Length Of Copper Refrigerant Piping With 3 Meter Pvc Covering Pipe, 3 Meter Drain Piping, Wrapping Tape And Necessary Insulation ,Electrical Flexible Cable Connectivity Between Indoor And Outdoor Unit. Necessary Drilling Of Hole And Finishing The Same To Match For The Surrounding As Required. , Supplying And Fixing Of Frp Box 200Mmx140mmx95mm Size (Nominal Size) On Surface With Hinged Door With Suitable Grounding Copper Bar Link With Holes Fitted Inside The Box Etc. As Required. , Supplying And Fixing Of Dual Rj 45 / Io Outlet On Existing Modular Switch Plate. , Supply,Installation,Testing And Commissioning Of Maintenace Free Earth Pit Of Single Pipe Technology Copper Pipe Of 2000Mm Long (Min), Outer Dia 50 Mm, Wall Thickness 1.2Mm(Min), Filled With Highly Conducting Metallic Compounds With The Permanent Sealing At Both The Ends And Lead Terminal Of 50 X 10 Mm Size At The Top The Length Of The Electrode Shall Be 2000 Mm Excluding The Lead Terminal And The Length Of The Lead Terminal At The Top Shall Be Minimum 50Mm. To Ensure The Moisture Content And Electrical Conductivity, Resistance Lowering Grounding Minerals Shall Be Filled Around The Electrode Of (Min25 Kg) .Heavy Duty Weather Proof Plastic Earth Pit Chamber With Cover Of Dimension 300 Mm Dia (Top), 260 Mm Dia(Bottom) And 300 Mm (Height) Shall Be Used, Numbering Of Pit And Measured Value Written With Weather Proof Painting Or Stickering. As Required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
14.
Housing Urban and Rular Development #11432200 Price Bid
Tender for Demolishing Stone Rubble Masonry Manually/ By Mechanical Meansincluding Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Ofengineer-In-Chargein Cement Mortar 15.9.2 , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width Aswell As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavatedearth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge.2.7.1 , Providing And Laying In Position Cement Concrete Of Specified Grade1:3;6(1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stonelevel 4.1.6 , Random Rubble Masonry (Second Sort) With Hard Stone In Foundation &Plinth Withcement Mortar 1:6 (1 Cement : 6 Coarse Sand) 7.1.1 , Centering And Shuttering Including Strutting, Propping Etc. And Removalof Form For :Suspended Floors, Roofs, Landings, Balconies And Access 5.9.3 , Providing And Laying In Position Specified Grade Of Reinforced Cementconcrete, Excluding The Cost Of Centering, Shuttering, Finishing Andreinforcement - All Work Up To Plinth Level :1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii): 3 Graded Stoneaggregate 20 Mm Nominal Size)5.1.2 , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Classdesignation 7.5 In Superstructure Above Plinth Level Up To Floor V Level Inall Shapes And Sizes In :6.4.1 , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting,Bending, Placing In Position And Binding All Complete Upto Plinth Level5.22.6 , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting,Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steelprimer Using Structural Steel Etc. As Requiredin Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates10.25.2. , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Bespecified By The Manufacturer) With Water Absorption Less Than 0.08%And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades,Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand),Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting Thejointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting Thejoints With White Cement And Matching Pigments Etc., Complete11.41.2 , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windowsand Other Frames, Wrought Framed And Fixed In Position With Hold Fastlugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Ordash Fastener Shall Be Paid For Separatelysal Wood 9.1.2 , Providing And Fixing Precoated Galvanised Iron Profile Sheets12.5 , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheetfixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.Ilimpet And Bitumen Washers Complete.12.4.1 , 12 Mm Cement Plaster Of Mix1:6 (1 Cement: 6 Fine Sand)13.1.2 , Finishing Walls With Textured Exterior Paint Of Required Shadenew Work (Two Or More Coats Applied @ 3.28 Ltr/10 Sqm)Over And Including Priming Coat Of Exterior Primer Applied@ 2.20Kg/10 Sqmqty As Item No 19 13.45.1 , Painting Steel Work With Deluxe Multi Surface Paint Togive An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/10 Sqm Of Approved Brand And Manufactur13.48.3 , Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brasspillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Includingpainting Of Fittings And Brackets, Cutting And Making Good The Wallswherever Require17.7.1 , Providing And Fixing White Vitreous China Pedestal Type Water Closet(Indian Type W.C. Pan) With Seat And Lid, 10 Litre Low Level Whitep.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlleddevice (Handle Lever), Conforming To Is : 7231, With All Fittings Andfixtures Complete, Including Cutting And Making Good The Walls Andfixtures Complete, Including Cutting And Making Good The Walls Andfloors Wherever Required :17.1.1 , Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conformingto Is:8931 18.49.1Providing And Laying 60Mm Thick Faciory Made Cement Concreteinterlocking Paver Block Of M -30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50Mmthick Compacted Bed Of Coarse Sand, Filling The Joints With Line Sandetc. All Complete As Per The Direction Of Engineer-In-Charge 16.91.1 , Providing And Laying 60Mm Thick Faciory Made Cement Concreteinterlocking Paver Block Of M -30 Grade Made By Block Makingmachine With Strong Vibratory Compaction, Of Approved Size, Design& Shape, Laid In Required Colour And Pattern Over And Including 50Mmthick Compacted Bed Of Coarse Sand, Filling The Joints With Line Sandetc. All Complete As Per The Direction Of Engineer-In-Charge 16.91.1 , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, 20 Mm Nominal Outer Dia Pipesinternal Work - Exposed On Wall 18.7.2 , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 100Mm 12.41.1 , 75 Mm 12.41.2 , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters:35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 9.21.1 , providing and Fixing Sitting Bench Rate Aerdo Market
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
15.
Housing Urban and Rular Development #11432192 Price Bid
Tender for Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge Nominal Concrete 1:3:6 Or Richer Mix (I/C Equivalent Designmix) 15.2.1 , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge In Cement Mortar 15.9.2 , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge.2.7.1 , Providing And Laying In Position Cement Concrete Of Specified Grade 1:3;6(1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) 4.1.6 , Random Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)7.1.1 , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :6.4.1 , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii): 3 Graded Stone Aggregate 20 Mm Nominal Size)5.1.2 , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size).5.3 , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 5.22.6: , Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete 5.9.1 , Suspended Floors, Roofs, Landings, Balconies And Access5.9.3 , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 10.25.2 , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete11.41.2 , Providing And Fixing Precoated Galvanised Iron Profile Sheets 12.5 , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I. Limpet And Bitumen Washers Complete.12.4.1 , 12 Mm Cement Plaster Of Mix 1:6 (1 Cement: 6 Fine Sand)13.12 , Finishing Walls With Textured Exterior Paint Of Required Shade New Work (Two Or More Coats Applied @ 3.28 Ltr/10 Sqm) Over And Including Priming Coat Of Exterior Primer Applied 2.20Kg/10 Sqm 13.45.1 , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufactur 13.48.3 , Providing And Laying 60Mm Thick Faciory Made Cement Concrete Interlocking Paver Block Of M -30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Line Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge 16.91.1 , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over Andjointed With Grey Cement Slurry Mixed With Pigment To Match The Shadeof The Slab, Including Rubbing And Polishing Complete With Base Of Cementmortar 1 : 4 (1 Cement : 4 Coarse Sand) :11.26.1 , Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sqmm. Fr Pvc Insulated Copper Conductor Single Core Cable In Surface/Recessed Pvc Conduit, With Piano Type Switch, Phenolic, Laminated Sheet, Suitable Size Ms Box And Earthing The Point With 1.5 Sq.Mm Fr Pvc Insulated Copper Conductor Single Core Cable Etc As Required.8.1 , Direction And Place Identification Signs More Than 0.9 Sqm Size Board.Providing And Erecting Direction And Place Identification Sign Withcorrosion Resistant 2Mm Thick Dg Grade Type Xi Retro- Reflectivecautionary, Mandatory, Informatory Sign Board With 10 Year Warranty Asper Irc:67 Made Of High Intensity Sheeting Fixed Over Acp (Aluminiumcomposite Panel) 3 Mm Thick (Including Framing And Bracing Withfabrication, Plotting Of Letters On Electro Cut Film, Pasting, Riveting, Taping 6-2-2
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
16.
Housing Urban and Rular Development #11432190 Price Bid
Tender for 2.6.1Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq M On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. - All Kinds Of Soil , 2.25Filling Available Excavated Earth (Excluding Hard Rock/Ordinary Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. , 2.27Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , 4.1.4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1 :2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , 4.1.8 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mmnominal Size) , 4.17Making Plinth Protection 50 Mm Thick Of Cement Concrete 1 :3:6 (1 Cement : 3 Coarse Sand (Zone-Ill) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. , 5.1.2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level [ 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii): 3 Graded Stone Aggregate 20 Mm Nominal Size) ] , 5.33.1.1 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana I Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate I Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , 5.33.2.1 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana I Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate I Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , 5.22.6Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , 5.9.1Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For : Foundations, Footings, Bases For Columns , 5.9.5Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , 5.9.21Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers With Water Proof Ply 12 Mm Thick , 6.1.2Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , 7.1.1Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1 :6:12 (1 Cement: 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level With : Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , 8.14.4.1Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1 :3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1 :2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :White Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 70 Mm Thick , 8.25.1Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 40 Mm Thick , 8.25.4Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 12 Mm Thick , 10.16.1Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , 10.25.1Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete , 11.41.2Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , 12.34Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg I M3, 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm)@ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , 12.50Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , 12.51.1 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , 12.51.2 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Flashings/ Aprons.( Upto 600 Mm) , 12.51.6 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Gutter (600 Mm Over All Girth) , 13.50.2Applying Priming Coat: With Ready Mixed Aluminium Primer Of Approved Brand And Manufacture On Resinous Wood And Plywood , 13.50.3Applying Priming Coat: With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , 13.62.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , 13.68.1French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , 16.69 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineer In-Charge (Length Of Finished Kerb Edging Shall Be Measured To Calculate Volume For Payment). (Precast cement concrete Kerb Stone Shall Be Approved By Engineer-In-Charge). , 16.92Providing And Fixing 10X10x7.50 Cm Granite Stone Block Hand Cut And Chisel Dressed On Top, For Paving In Floors, Drains Etc. Laid Over 20 Mm Thick Base Mortar 1:4 (1 Cement : 4 Coarse Sand) With Joints 10 Mm Wide Filled With Same Mortar Including Ruled Pointing Etc. Complete As Per Direction Of Engineer-In-Charge. , 1-2Excavationinfoundationfor Retaining,Breastwallsetc, Inall Typesofsoils And Rocks Includingall Lead, Lift Anddisposal Of Surplusmaterial Asper Direction Of Engineer- In- Charge, As Per Drawing And Technical Specifications Clause 305.1 Of Mord Specifiction , 1-4 Randomrubblestonemasonry Laid In1:6Cement Andsandmortar, In Breastwalls,Retainingwalls,Parapets,Scuppers,Etc. Includingsupplyofall Material, Labour, T&Pand Royaltiies Etc. Complete As Per Drawingand Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , 1-3 Randomrubblestonemasonry Laiddry, Inbreastwalls, Retainingwalls, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Completeasper Drawingand Technical Specificationsclauses702, 704, 1202 & 1203 Of Mord Specifiction , 1-5 Handpackedstonefillinginbackofwallls Includingcostofallmaterials, Royality,T&Petc.Completeasperdirectionofengineer-In-Charge. (Asper Pwd Uttarakhand Specifications) , 2-2Concretewithcement, Coarsesandand40mmgaugestoneballast In Proportion1:4:8 In Foundationsand Floors Includingsupplyof Allmaterial, Labour Andt&Petc. Required For Proper Completionof Thework. Asper Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , 3-7Removal Of Unsuitable Soil With Disposal Upto 1000 M Removal Of Unsuitable Soil Including Excavation, Loading And Disposal Upto 1000 M Lead But Excluding Compaction Ground Supporting Embankment Subgradereplacement By Suitable Soil, Which Shall Be Paid Separately As Per Clause 303.5.2As Per Technical Specification Clause 302.3.11 , 12-9Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Providing & Supplying Of 25W Self Ballasted Led , Providing & Supplying Of Decorative Lighting Pole Of 4M , Providing & Fixing Of Aayush Wellness Based Signages/Boards Including Vertical Pole & Ms Sheet , Providing & Fixing Of Aayush Wellness Based 3D Paintings With Pop Texture Including Texture Paint
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
17.
Housing Urban and Rular Development #11432189 Price Bid
Tender for Demolishing Of Cement Concrete Manually & Disposal Of Material Within 50 Metres.Nominal Concrete 1:3:6 Or Richer Mix , Demolishing Of Reinforced Cement Concrete Work Manually Including Stacking Of Steel Bars & Disposal Of Material Within 50 Metres. , Dismantling Of Doors & Windows Frames & Chawkhats Of Area Blow 3 Sqm. , Dismantiling Of Roofing Including Ridges, Hips Valley And Gutters Etc. And Stacking Gs Sheet , Earth Work In Excavation By Mechanical Means By Hydraulicexcavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or10 Sqm On Plan Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Excavating Trenches Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M :Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth,Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5M. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:4:8 (1 Cement : 4 Coarse Sand (Zoneiii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Specified Grade Of Reinforceed Cement Cocrete Excluding The Cost Of Centering, Shuttring, Finishing And Reinforcment - All Work Upto Plinth Level.1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20Mm Nominal Size) , Reinforced Cement Concrete Work In Walls (Any Thickness),Including Attached Pilasters, Buttresses, Plinth And String Courses,Fillets, Columns, Pillars, Piers,Abutments, Posts And Struts Etc. Upto Floor Five Level Excluding Cost Of Centring,Shuttering, Finishing And Reinforcement.1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20Mm Nominal Size) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level- Thermo-Mechanically Treated Bars , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level Cement Mortar 1 :4 (1 Cement :4 Coarse Sand) , Casement Cum Fixed Panel Window Having One Single Casement Panel & One Fixed Panel With S.S 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles Using R3 Series With Frame (55 Mm & Above ) X (45 Mm & Above) & Sash (55 Mm & Above) X (65 Mm & Above) & Mullion (55 Mm & Above) X (65 Mm & Above). (Height Upto 1.8 Metre; Each Openable Shutter Upto 0.8M Width) , Ventilator Casement Window Single Panel With Or Without Fixed Panel With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Single Point Locking Zinc Alloy (Zamak) Using R3 Series With Frame (55 Mm & Above) X (45 Mm & Above) & Sash /Mullion (55 Mm & Above) X (65 Mm & Above). (Height Above 1.2 Metre) , Casement Door Double Panel With French (False) Mullion With Zinc Alloy (Zamak) 30 Hinges, Multi-Point Locking System With Cylinder, Zinc Alloy (Zamak) Powder Coated Handles On Both Sides.Using R4 Series With Frame (64 Mm & Above) X (55 Mm & Above) & Sash (64 Mm & Above) X (100 Mm & Above) & French (False) Mullion (64 Mm & Above) X (60 Mm & Above). (Height Above 2.5 Metre). , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1 :4 (1 Cement: 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing Of Edges To Give High Gloss Finish Etc. Complete At All Levels Granite Stone Slab Of All Colour And Texture Except Black, Cherry/Ruby Red Area Of Slab Over 0.50 Sqm , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1 :3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. , 12 Mm Cement Plaster Of Mix :1:6 (1 Cement: 6 Coarse Sand) , 20 Mm Cement Plaster Of Mix 1:6 (1 Cement: 6 Coarse Sand) , Providing & Applying White Cement Based Putty Of 2 Mm Thick Of Approved Brand Over Plastered Wall Surface For Even & Smooth Wall Fiinsh , Finishing With Delux Multi Surface Paint For Interiors Using Primer As Specified Two Or More Coats Applied On Wall At 1.25Ltr/10 Sqm Over And Including And On Coat Of Special Primer , Finishing Walls With Textured Acrylic Smooth Paint New Work (Two Or More Coats Applied @ 3.28 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm , Applying Primer Coat With Ready Mix Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacturer On Steel Works And Gi , Finishing With Epoxy Paint Two Coats On All Location Prepared And Applied On Steel , Providing Corrugated G.S. Sheet Roofing Including Vertical I Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces), Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete Barge Board Upto 300 Mm , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete Gutter 600 Mm Over All Girth , Providing 10 Mm Thick Plaster Of Paris (Gypsum Anhydrous) Ceiling Up To A Height Of 5 M Above Floor Level, Over First Class Kail Wood Strips 25X6 Mm With 10 Mm Gap In Between And Reinforced With Rabbit Wire Mesh Fixed To Wooden Frame (Frame Work To Be Paid Separately) , Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level With :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level With :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
18.
Housing Urban and Rular Development #11432188 Price Bid
Tender for Demolishing Of Cement Concrete Manually & Disposal Of Material Within 50 Metres.Nominal Concrete 1:3:6 Or Richer Mix , Demolishing Of Reinforced Cement Concrete Work Manually Including Stacking Of Steel Bars & Disposal Of Material Within 50 Metres. , Dismantling Of Doors & Windows Frames & Chawkhats Of Area Blow 3 Sqm. , Dismantiling Of Roofing Including Ridges, Hips Valley And Gutters Etc. And Stacking Gs Sheet , Earth Work In Excavation By Mechanical Means By Hydraulicexcavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or10 Sqm On Plan Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Excavating Trenches Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Upto 1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M :Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth,Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5M. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:4:8 (1 Cement : 4 Coarse Sand (Zoneiii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Specified Grade Of Reinforceed Cement Cocrete Excluding The Cost Of Centering, Shuttring, Finishing And Reinforcment - All Work Upto Plinth Level.1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20Mm Nominal Size) , Reinforced Cement Concrete Work In Walls (Any Thickness),Including Attached Pilasters, Buttresses, Plinth And String Courses,Fillets, Columns, Pillars, Piers,Abutments, Posts And Struts Etc. Upto Floor Five Level Excluding Cost Of Centring,Shuttering, Finishing And Reinforcement.1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20Mm Nominal Size) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level- Thermo-Mechanically Treated Bars , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level Cement Mortar 1 :4 (1 Cement :4 Coarse Sand) , Casement Cum Fixed Panel Window Having One Single Casement Panel & One Fixed Panel With S.S 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles Using R3 Series With Frame (55 Mm & Above ) X (45 Mm & Above) & Sash (55 Mm & Above) X (65 Mm & Above) & Mullion (55 Mm & Above) X (65 Mm & Above). (Height Upto 1.8 Metre; Each Openable Shutter Upto 0.8M Width) , Ventilator Casement Window Single Panel With Or Without Fixed Panel With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Single Point Locking Zinc Alloy (Zamak) Using R3 Series With Frame (55 Mm & Above) X (45 Mm & Above) & Sash /Mullion (55 Mm & Above) X (65 Mm & Above). (Height Above 1.2 Metre) , Casement Door Double Panel With French (False) Mullion With Zinc Alloy (Zamak) 30 Hinges, Multi-Point Locking System With Cylinder, Zinc Alloy (Zamak) Powder Coated Handles On Both Sides.Using R4 Series With Frame (64 Mm & Above) X (55 Mm & Above) & Sash (64 Mm & Above) X (100 Mm & Above) & French (False) Mullion (64 Mm & Above) X (60 Mm & Above). (Height Above 2.5 Metre). , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1 :4 (1 Cement: 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing Of Edges To Give High Gloss Finish Etc. Complete At All Levels Granite Stone Slab Of All Colour And Texture Except Black, Cherry/Ruby Red Area Of Slab Over 0.50 Sqm , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1 :3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. , 12 Mm Cement Plaster Of Mix :1:6 (1 Cement: 6 Coarse Sand) , 20 Mm Cement Plaster Of Mix 1:6 (1 Cement: 6 Coarse Sand) , Providing & Applying White Cement Based Putty Of 2 Mm Thick Of Approved Brand Over Plastered Wall Surface For Even & Smooth Wall Fiinsh , Finishing With Delux Multi Surface Paint For Interiors Using Primer As Specified Two Or More Coats Applied On Wall At 1.25Ltr/10 Sqm Over And Including And On Coat Of Special Primer , Finishing Walls With Textured Acrylic Smooth Paint New Work (Two Or More Coats Applied @ 3.28 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm , Applying Primer Coat With Ready Mix Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacturer On Steel Works And Gi , Finishing With Epoxy Paint Two Coats On All Location Prepared And Applied On Steel , Providing Corrugated G.S. Sheet Roofing Including Vertical I Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces), Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete Barge Board Upto 300 Mm , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete Gutter 600 Mm Over All Girth , Providing 10 Mm Thick Plaster Of Paris (Gypsum Anhydrous) Ceiling Up To A Height Of 5 M Above Floor Level, Over First Class Kail Wood Strips 25X6 Mm With 10 Mm Gap In Between And Reinforced With Rabbit Wire Mesh Fixed To Wooden Frame (Frame Work To Be Paid Separately) , Excavation Work By Mechanical Means (Hydraulic Excavator)/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soils As Directed, Within A Lead Of 50 M. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1 :1.5 :3 (1 Cement: 1 % Coarse Sand (Zone-Ill) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Supply & Fixing Of Pedestrain Traffic Barrier , Supply & Fixing Of Dustbin , Supply & Fixing Of Signages
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
19.
Housing Urban and Rular Development #11432187 Price Bid
Tender for Demolishing Of Cement Concrete Manually & Disposal Of Material Within 50 Metres.Nominal Concrete 1:3:6 Or Richer Mix , Demolishing Of Reinforced Cement Concrete Work Manually Including Stacking Of Steel Bars & Disposal Of Material Within 50 Metres. , Demolishing Of Brick Work Manually. In Cement Mortar Disposal Of Material Within 50 Metres , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Dismantling Of Doors & Windows Frames & Chawkhats Of Area Blow 3 Sqm. , Dismantiling Of Roofing Including Ridges, Hips Valley And Gutters Etc. And Stacking Gs Sheet , Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As 10 Sqm On Plan Including Getting Out And Disposal Of Excavated Earth Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In- Charge: , Earth Work In Excavation By Mechanical Means By Hydraulicexcavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or10 Sqm On Plan Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth,Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5M. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 , Providing And Laying Cement Concrete In Kerbs, Steps And The Like At Or Near Ground Level Excluding The Cost Of Centering, Shuttering And Finishing. 1:1.5:3 (1 Cement: 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size. , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete. , Reinforced Cement Concrete Work In Walls, Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement. 1:1.5:3 (1 Cement :1.5 Coarse Sand: 3 Graded Stone Aggregate 20 Mm Nominal Size) , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Walls Including Attached Pilasters, Butteresses, Plinth And String Courses Etc. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level- Thermo-Mechanically Treated Bars , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level Cement Mortar 1 :4 (1 Cement :4 Coarse Sand) , Three Track Three Panels Sliding Window With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. Using R3 Series With Frame (98 Mm & Above) X (40 Mm & Above) & Sash (30 Mm & Above) X (55 Mm & Above) With Zinc Alloy (Zamak) Powder Coated Handle On Two End Panels Along With Multi-Point Locking System (Height Upto 1.8 Metre) , Casement Door Double Panel With French (False) Mullion With Zinc Alloy (Zamak) 30 Hinges, Multi-Point Locking System With Cylinder, Zinc Alloy (Zamak) Powder Coated Handles On Both Sides.Using R4 Series With Frame (64 Mm & Above) X (55 Mm & Above) & Sash (64 Mm & Above) X (100 Mm & Above) & French (False) Mullion (64 Mm & Above) X (60 Mm & Above). (Height Above 2.5 Metre). , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete , Providing And Laying 60 Mm Thick Faciory Made Cement Concrete Interlocking Paver Block Of M-30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Line Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1 :3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. , 12 Mm Cement Plaster Of Mix :1:6 (1 Cement: 6 Coarse Sand) , 20 Mm Cement Plaster Of Mix 1:6 (1 Cement: 6 Coarse Sand) , Providing & Applying White Cement Based Putty Of 2 Mm Thick Of Approved Brand Over Plastered Wall Surface For Even & Smooth Wall Fiinsh , Colour Washing Such As Green, Blue Or Buff To Give An Even Shade. New Work (Two Or More Coats) With A Base Coat Of Whiting. , Distempering With 1St Quality Acrylic Distemper Having Voc Content Less Than 50 Gram/Litre, Of Approved Manufacturer And Of Required Shade And Colour All Complete To Achieve Even Shade And Colour. New Work Over And Including Water Thinnable Priming Coat With Cement Primer Having Voc Content Less Than 50 Gram/Litre , Finishing Walls With Water Proofing Cement Paint Of Required Shade Two Or More Coats Applied. , Finishing With Delux Multi Surface Paint For Interiors Using Primer As Specified Two Or More Coats Applied On Wall At 1.25Ltr/10 Sqm Over And Including And On Coat Of Special Primer , Applying Primer Coat With Ready Mix Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacturer On Steel Works And Gi , Finishing With Epoxy Paint Two Coats On All Location Prepared And Applied On Steel , Providing And Fixing Dry Cladding Upto 10 Metre Height With 30 Mm Thick Gang Saw Cut Stone With Machine Cut Edges Of Uniform Colour And Size Upto 1Mx1m, Fixed To Structural Steel Frame Work And/ Or With The Help Of Cramps, Pins Etc. And Sealing The Joints With Approved Weather Sealant As Per Architectural Drawing And Direction Of Engineer-In-Charge , Providing And Fixing Insulating Board Ceiling Of Approved Quality With Necessary Nails Etc. Complete. Flame Retardant Face Insulating Board, 12 Mm Thick , Providing And Fixing Thermal Insulation With Resin Bonded Fibre Glass Wool Conforming To Is: 8183. Density 16 Kg/M³, 50 Mm Thick, Wrapped In 200G Virgin Polythene Bags Placed Over Existing False Ceiling And Held In Position By Criss-Crossing Gi Wire , Providing Wood Work In Frames Of False Ceiling, Partitions Etc. Sawn And Fixed In Position With Necessary Stainless Steel Screws Etc. , Providing And Fixing 35 Mm Thick Factory Made Laminated Veneer Lumber Door Shutter Conforming To Is : 14616 And Tads 15:2001 (Part B), Fixing With Butt Hinges Of Required Size With Necessary Screws, All Complete As Per Directions Of Engineer- In-Charge And Panelling With Panels Of 12 Mm Thick Plain Grade -1, Medium Density Flat Pressed Three Layer Particle Board , Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows. Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. Particle Board 12 Mm Thick. , Varnishing With Varnish Of Approved Brand And Manufacture : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture. Two Or More Coats Of Glue Sizing With Copal Varnish Over An Under Coat Of Flatting Varnish , French Spirit Polishing Two Or More Coats On New Works Including A Coat Of Wood Filler , Polishing On Wood Work With Ready Mixed Wax Polish Of Approved Brand And Manufacture :
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
20.
Housing Urban and Rular Development #11432178 Price Bid
Tender for Excavation In Foundation For Retaining, Breast Walls Etc, In All Types Of Soils And Rocks Including All Lead, Lift And Disposal Of Surplus Material As Per Direction Of Engineer - In - Charge, As Per Drawing And Technical Specifications Clause 305.1 Of Mord Specifiction , Removal Of Unsuitable Soil With Disposal Upto 1000 M Removal Of Unsuitable Soil Including Excavation, Loading And Disposal Upto 1000 M Lead But Excluding Compaction Ground Supporting Embankment Subgrade Replacement By Suitable Soil, Which Shall Be Paid Separately As Per Clause 303.5.2 As Per Technical Specification Clause 302.3.11 , Concrete With Cement, Coarse Sand And 40 Mm Gauge Stone Ballast In Proportion 1:4:8 In Foundations And Floors Including Supply Of All Material, Labour And T&P Etc. Required Forproper Completion Of The Work. As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Random Rubble Stone Masonry Laid In 1:6 Cement And Sand Mortar, In Breast Walls, Retaining Walls, Parapets, Scuppers, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Complete As Per Drawing And Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , Random Rubble Stone Masonry Laid Dry, In Breast Walls, Retaining Walls, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Complete As Per Drawing And Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , Hand Packed Stone Filling In Back Of Wallls Including Cost Of All Materials, Royality, T&P Etc. Complete As Per Direction Of Engineer-In- Charge. (As Per Pwd Uttarakhand Specifications) , Providing Weepholes In Brick Masonry/Stone Masonry, Lain / Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Excavation In Hilly Areas In Ordinary Rock By Mechanical Means Not Requiring Blasting (With Out Dozer) Excavation In Hilly Area In Ordinary Rock Not Requiring Blasting By Mechanical Means Without Using Dozer Including Cutting And Trimming Of Slopes And Disposal Of Cut Material With A Lift Upto 1.5 M And Lead Upto 20 M As Per Clause 1603.2. , Providing And Laying Of Stone Set Pavement Over 2.5 Cm Thick Bedding Layer Of Plain Cement Concrete 1:2:4 Which Shall Further Be Placed Over 10 Cm Thick Dry Stone Kharanja Or Crushed Stones Base Over A Prepared Subgrade As Per Drawings And Technical Specifications. The Size Of Stones Shall Not Be Less Than 20Cm X 20Cm And Thickness Of Stones Shall Vary From 10Cm To 15 Cm. The Work Includes Filling Of Joints With Plain Cement Concrete 1:2:4 As Per The Standard Drawings And Instructions Of The Engineer-In-Charge. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 6.4.1 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:6 (1 Cement: 6 Fine Sand) - Outer Plaster , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : 13.41.1 New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Seamless Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggreentrance Gate 20 Mm Nominal Size Derived From Natural Sources) , Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggreentrance Gate 20 Mm Nominal Size) Upto Plinth Level With : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggreentrance Gate 20 Mm Nominal Size Derived From Natural Sources) , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Columns, Pillars, Piers, Abutments, Posts And Struts , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers With Water Proof Ply 12 Mm Thick , Random Rubble Masonry With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like. Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Pointing On Stone Work With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) : Raised And Cut Pointing , Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 12 Mm Thick , French Spirit Polishing : Two Or More Coats On New Works Including A Coat Of Wood Filler , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg / M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Flashings/ Aprons.( Upto 600 Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Gutter (600 Mm Over All Girth) , Manufacturing, Supplying And Fixing Retro Reflective Sign Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity Encapsulated Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iv Of Astm-D 4956-01 In Blue And Silver White Or Other Colour Combination Including Subject Matter, Message (Bi-Lingual), Symbols And Borders Etc. As Per Irc ; 67:2001, Pasted On Substrate By An Adhesive Backing Which Shall Be Activated By Applying Heat And Pressure Conforming To Class -2 Of Astm-D-4956-01 And Fixing The Same With Suitable Sized Aluminium Alloy Rivets @ 20 Cm C/C To Back Support Frame Of M.S. Angle Iron Of Size 25X25x3 Mm Along With Theft Resistant Measures, Mounted And Fixed With 2 Nos. M.S. Angles Of Size 35X35x5 Mm To A Vertical Post Made Up To M.S. Tee Section Ismt 50X50x6 Mm Welded With Base Plate Of Size 100X100x5 Mm At The Bottom End And Including Making Holes In Pipes, Angles Flats, Providing & Fixing M.S. Message Plate Of Required Size, Steel Work To Be Painted With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade And Of Approved Brand & Manufacture Over Priming Coat Of Zinc Chromate Yellow Primer (Vertical Ms-Tee Support To Be Painted In Black And White Colours).Backside Of Aluminium Sheet To Be Painted With Two Or More Coats Of Epoxy Paint Over And Including Appropriate Priming Coat Including All Leads And Lifts Etc. Complete As Per Drawing, Specification And Direction Of Engineer-In-Charge. 16.59.1 Mandatory/ Regulatory Sign Boards Of 900 Mm Diametre With Support Length Of 3750 Mm , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. 2.6.1 All Kinds Of Soil , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M , Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration , Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone - Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth , Providing And Fixing Plain Lining With Necessary Screws/Nuts & Bolts/ Nails, Including A Coat Of Approved Primer On One Face, And Fixed On Wooden /Steel Frame Work, Complete As Per Direction Of Engineer-In- Charge (Frame Work Shall Be Paid For Separately). 12 Mm Thick Commercial Ply Conforming To Is : 1328 Bwr Type , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg / M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing And Fixing Of External Wall System On Light Gauge Steel Frame Work With Outer Face Cement Boards As Per Standard Sizes Fixed With Self-Drilling / Taping Screws / Fasteners @ 60 Cm C/C Of Approved Make. A Groove Of 2 Mm To 3 Mm Shall Be Maintained And Grooves Shall Be Sealed With Silicon Based Sealant. The Board Shall Be Fixed In A Staggered Pattern. Screws Shall Be Of Counter Sunk Rib Head Of 1.60 Mm To 4 Mm Thick Or 8 To 10 Gauge Of Length Varying From 25 To 45 Mm And. Internal Face 12.5 Mm Thick Gypsum Plaster Board Fixed On Cement Board As Per Standard Sizes Fixed With Self- Drilling / Taping Screws / Fasteners @ 60Cm C/C Of Approved Make, Proper Taping And Jointing To Be Done Using Fiber Mesh Tape And Epoxy And Acrylic Based Jointing Compound For Seamless Finish.(Cost Of Frame Work To Be Paid For Separately) Outer Face- Outer Face Having 6 Mm Thick Fiber Cement Board Type A, Category-Iv As Per Is:14862:2000 Fixed On 9 Mm Thick Fiber Cement Board, Type A, Category-Iv As Per Is:14862:2000 (High Pressure Steam Cured) Inner Face- 12.5 Mm Thick Gypsum Plaster Board Conforming To Is 2095:2011 Fixed On 8 Mm Thick Fibre Cement Board Of Type B, Category-Iii As Per Is:14862:2000 (High Pressure Steam Cured) , Providing And Fixing Internal Wall Panels On Light Gauge Steel Frame Work With 12.5 Mm Thick Gypsum Plaster Board Conforming Is 2095:2011 Fixed On Cement Board As Per Standard Sizes Fixed With Self-Drilling / Taping Screws / Fasteners @ 60 Cm C/C Of Approved Make, Screws Shall Be Of Counter Sunk Rib Head Of 1.60 Mm To 4 Mm Thick Or 8 To 10 Gauge Of Length Varying From 25 To 45 Mm. Proper Taping And Jointing To Be Done Using Fiber Mesh Tape And Epoxy And Acrylic Based Jointing Compound For Seamless Finish.(Cost Of Frame Work To Be Paid For Separately Cement Fiber Board 8 Mm Thick Of Type B, Category Iii As Per Is 14862:2000 (High Pressure Steam Cured) , Providing And Fixing In All Exterior Face Panels Breathable Vapour Barrier Underneath The Cement Fiber Board As Per National Building Code 2009 Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing M.S. Tubular Frames For Doors, Windows, Ventilators And Cupboard With Rectangular/ L-Type Sections, Made Of 1.60 Mm Thick M.S. Sheet, Joints Mitred, Welded And Grinded Finish, With Profiles Of Required Size, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 10.15.1 Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size , Providing And Fixing Pressed Steel Door Frames Conforming To Is: 4351, Manufactured From Commercial Mild Steel Sheet Of 1.60 Mm Thickness, Including Hinges, Jamb, Lock Jamb, Bead And If Required Angle Threshold Of Mild Steel Angle Of Section 50X25 Mm, Or Base Ties Of 1.60 Mm, Pressed Mild Steel Welded Or Rigidly Fixed Together By Mechanical Means, Including M.S. Pressed Butt Hinges 2.5 Mm Thick With Mortar Guards, Lock Strikeplate And Shock Absorbers As Specified And Applying A Coat Of Approved Steel Primer After Pre-Treatment Of The Surface As Directed By Engineer In-Charge: Profile B Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size (To Be Paid For Separately) , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding , Providing And Fixing Fly Proof Galvanized M.S. Wire Gauge To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm All Complete. With 12 Mm Mild Steel U Beading (Mosquito Jali). , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With : 10.30.1 4.0 Mm Thick Glass Panes , Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 125 Mm , Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 250X10 Mm , Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 300X16 Mm , Providing And Fixing Isi Marked 85X42 Mm Oxidised M.S. Pull Bolt Lock Conforming To Is : 7534 With Necessary Screws Bolts, Nut And Washers Etc. Complete (Copper Oxidised As Per Is 1378). , Providing And Fixing Aluminium Hanging Floor Door Stopper Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete. Single Rubber Stopper , Providing And Fixing Ptmt Door Catcher Of Length 72 Mm And Dia. Of 42 Mm With Suitable Washers Weighing Not Less Than 33 Gms , Providing And Laying Vitrified Tiles In Floor With Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately). Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Brand & Manufacturer, In All Colours And Shade, In Skirting, Riser Of Steps, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is: 15477, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately). Size Of Tile 600X600 Mm , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Supplying And Filling Of Earth By Mechanical Transport Including Loading, Unloading & Stacking Beyond 5Km Upto 10Km & Beyond 10Km Upto 20Km (Including All) , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge; For The Following Grades Of Concrete. Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level. Concrete Of M30 Grade With Minimum Cement Content Of 350 Kg /Cum , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Extra For Providing And Placing In Position 2 Nos 6Mm Dia. M.S. Bars At Every Third Course Of Half Brick Masonry , 12 Mm Cement Plaster Of Mix: 1:6 (1 Cement: 6 Fine Sand) - Inner Plaster , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screw , Providing And Fixing Factory Made Isi Marked Steel Glazed Doors, Windows And Ventilators, Side /Top /Centre Hung, With Beading And All Members Such As F7d,F4b, K11 B And K12 B Etc. Complete Of Standard Rolled Steel Sections, Joints Mitred And Flash Butt Welded And Sash Bars Tenoned And Riveted, Including Providing And Fixing Of Hinges, Pivots, Including Riming Coat Of Approved Steel Primer, But Excluding The Cost Of Other Fittings, Complete All As Per Approved Design, (Sectional Weight Of Only Steel Members Shall Be Measured For Payment). 10.11.1 Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete , Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sq.M Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sq M Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sq M) , Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : (A) First Layer Of Slurry Of Cement @ 0.488 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg/ Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. (B) Second Layer Of Slurry Of Cement @ 0.242 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg/Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. , Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To Reinforced Cement Concrete Projections.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
21.
Housing Urban and Rular Development #11432177 Price Bid
Tender for Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 6.4.1 Cement Mortar 1 :4 (1 Cement: 4 Coarse Sand) , 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Fine Sand) 13.1.2 , Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour. Two Coats 13.83.2 , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1 :4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 11.41.2 , Polishing In High Gloss/Matt Finish Melamine Clear Polish On Wood Work In Required Color/Wooden Shade Texture With Following Process In The Sequence As Detailed 13.116 , Providing And Fixing Flat Pressed Three Layer Particle Or Graded Plain Wood Board Medium Density Exterior Grade (Grade I) Fpt-1, Conforming And Marked To Frame, Backing Or Studding With Screws Etc. Complete (Frames, Backing Or Studding To Be Paid Separately): 9.17.1 12Mmthick , Multipurpose Cement Board Reinforced With Suitable Fibre Cement Screw. 8 Mm Thick Cement Fibre Board, Type- B, Category- Ill As Per Is: 14862 : 2000 9.133.2.1 , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 10.25.2 , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 12.50 , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement -All Work Up To Plinth Level :1 :1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Ill) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 5.1.2 , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) I Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. 2.8.1 All Kinds Of Soil. , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-5000 Or More. 5.22.6 , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply And All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall 18.7.1 15 Mm Nominal Dia Pipes , 1 :4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) 4.1.8 , Two Track Two Panels Sliding Window With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. 9.147.A1 .1 Using R2 Series With Frame (40 Mm & Above) X (40 Mm & Above) & Sash (25 Mm & Above) X (50 Mm & Above) With Zinc Alloy (Zamak) Powder Coated Touch Locks With Hook (Height Upto 1.2 Metre). , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : 12.51.1 Ridges Plain (500 - 600Mm) , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg I M3, 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm)@ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of: , Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260x350 Mm And 340X410x265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type) With Seat And Lid, 10 Litre Low Level White Vitreous China Flushing Cistern & C.P. Flush Bend With Fittings & C.I. Brackets, 40 Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , providing and Fixing Of Canada Pine Including Supplying And Fixing Of All Material T&P , Labor Etc , Supply And Fixing Of Wash Basin With Vanity Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Off Towel Ring Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Toilet Paper Holde Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Hand Fauscets Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Angle Valve Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Short Body Bib Cock Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Shop Disc Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Looking Mirror Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Shower Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Wash Basin Mix Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Wall Mix Inluding Of All Material Labour T & P Etc Complete. , Supply And Fixing Of Bunk Bed Inluding Of All Material Labour T & P Etc Complete.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
22.
Public Administrative Department #11417772 Price Bid
Tender For Repairing And Maintenance Of Civil Related Works In Ward No.19 (For The Year 2025-26)-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for thefoundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge. Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, f oundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.: Bd.F.17, Page No. 306 Ground Floor Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means Removing and Transporting of excavated / demolished material within PCMC limit including loading, unloading, stacking the material as directed by Engineer-in-charge etc. complete. (For Lead 10.0 Km). Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with WITHOUT SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer Page No - 3 without SCADA with fine agreegates of required specifications (Crushed sand / VSI grade ) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material Granular Sub Base Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material (Note- As per circular issued by Hon. city engineer PCMC , vide civil/CE/TS/23/16/2023.Date 21/04/2023 .Rate is reducedby 20% as material is brought from PCMCs C and D waste processing plant.) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material Construction of granular Page No - 4 sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material Note- As per circular issued by Hon. City Engineer, PCMC vide circular no.Civil/CE/TS/23/16/2023 Dated 21/04/2023, rate is reduced to 20% as material is to be brought from C and D work processing plant Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Spreading hard murum/ soft murrum/ gravel or kankar for side width complete Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shadeetc. complete. Ground Floor Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel st anchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Lift 0.0 to 3.8 M Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. PARDI of required thickness including centering, formwork, cover blocks, laying/pumping ,compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural Page No - 6 steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With Crushed sand VSI Grade. Spec. no.:- Bd.F.11 Page No. 304 and B.7, Page No. 38 Ground Floor Providing fly ash brick masonry with conventional / S. type fly ash bricks in C.M. 6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Providing fly ash brick masonry with conventional/ S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Lift 0.0 to 3.8 M Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints un exposed faces and watering etc.complete. Providing waterproof plaster W.C. and bath 20 mm thick dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. Removing the tar or coba and disposing of the material as directed etc. complete. Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor Lift 0.0 to 3.8 M Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. etc
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 6
Maharashtra View Result →
23.
Public Administrative Department #11417771 Price Bid
Providing Civil Works In Ward No.14 Kalbhor Nagar, Moannagar And Other Areas (Year 2025-26)-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for thefoundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge. Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, f oundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.: Bd.F.17, Page No. 306 Ground Floor Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means Removing and Transporting of excavated / demolished material within PCMC limit including loading, unloading, stacking the material as directed by Engineer-in-charge etc. complete. (For Lead 10.0 Km). Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with WITHOUT SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer without SCADA with fine agreegates of required specifications (Crushed sand VSI grade ) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material Granular Sub Base Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material (Note- As per circular issued by Hon. city engineer PCMC , vide civil/CE/TS/23/16/2023.Date 21/04/2023 .Rate is reducedby 20% as material brought from PCMCs C and waste processing plant.) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material Note- As per circular issued by Hon. City Engineer, PCMC vide circular no.Civil/CE/TS/23/16/2023 Dated 21/04/2023, rate is reduced to 20% as material is to be brought from C and D work processing plant Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Spreading hard murum/ soft murrum/ gravel or kankar for side width complete Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shadeetc. complete. Ground Floor Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel st anchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Lift 0.0 to 3.8 M Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. PARDI of required thickness including centering, formwork, cover blocks, laying/pumping ,compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With Crushed sand VSI Grade. Spec. no.:- Bd.F.11 Page No. 304 and B.7, Page No. 38 Ground Floor Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Lift 0.0 to 3.8 M Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. Removing the tar or coba and disposing of the material as directed etc. complete. Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering to 10 Square Metre Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor Lift 0.0 to 3.8 M Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat) Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Ground Floor Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. Ground Floor Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 etc
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 8
Maharashtra View Result →
24.
Public Administrative Department #11417770 Price Bid
Doing Civil Related Works In Akurdi Areas At Ward No.14 (For The Year 2025-26)-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for thefoundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. Removing and Transporting excavated / demolished material within PCMC limit including loading, unloading, stacking the material as directed by Engineer-in-charge etc. complete. (For Lead 10.0 Km). Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foun dation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (VSI sand finely washed etc ) Providing and laying in situ Ready Mix cement concrete M-20 of trap / granite quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate Crushed sand VSI Grade) Providing fly ash brick masonry with conventional / S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Providing fly ash brick masonry with conventional/ S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Lift 0.0 to 3.8 M Providing leak proof treatment by Injection grouting method to old floor without removing tiles of W.C., bath, with cement sand proportion of 1:1.5 and waterproofing compound at 2 Kilogram/bag of cement mixed in 35 liters of water including drilling holes in required position grouting with above mixed solution and ceiling etc. complete. Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. Gound Floor Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. Granular Sub Base Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material (Note- As per circular issued by Hon. city engineer PCMC , vide civil/CE/TS/23/16/2023.Date 21/04/2023 .Rate is reducedby 20% as material is brought from PCMCs C and waste processing plant.) Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material Removing the tar or coba and disposing of the material as directed etc. complete. Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Ground Floor Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Ground Floor Lift 0.0 to 3.8 M Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. Ground floor Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. Ground Floor Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. Providing and fixing 1.5 mm thick polyvenyl venyl chloride flooring including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in requiredposition laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Ground Floor Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of to 10 mm thickness and confirming to IS. 15622-2006 group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete Ground Floor Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. Ground Floor Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval Superintending Engineer will be necessary. Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat) Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Ground Floor Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. Ground Floor Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. Ground Floor Providing and applying external raincoat painting with crack filling acrylic polymer based chemical compound coating to the external surface of walls to prevent water seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrapping the existing loose old paint, removing loose particles of sand on the surface opening and cleaning the cracksdeveloped in the external plaster, removing loose particles by chiseling, filling cracks by chemicals compound of approved make with proper penetration etc. Coating of Raincoat with the help of brush and as per instructions and specification given by manufacturer and with instruction from Engineer in- charge. Work shall be executed by certified applicator only and covering gurantee of 3 years on court stamp paper of Rs. 500/- and necessary testing etc. complete. Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Lift 0.0 to 3.8 M Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not lessthan 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossingswith hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, oil painting two coats complete. Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti- corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including etc
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 6
Maharashtra View Result →
26.
Defence #11409082 Technical Bid
Tender for Demolition Of Reinforced Cement Concrete Cover Slab And Removing The Debris To A Distance Not Exc 500M As Directed. , Material And Labour For Precast Cement Concrete B1, Type 1:2:4 Using 20 Mm Graded Stone Aggregate For Cover Slab Set In Cm 1:4 Including Necessary Formwork Complete All As Specified. , Material And Labour For Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length Bend To Shape Required Including Cranking Bending Spirally For Hopping For Columns Hooking Ends And Binding With And Clips Complete All As Specified And Directed. , Demolition Of Stone /Boulder Masonry, Built In Cement Mortar Including All Quoins, Arches, Pillars, Etc., But Excluding Ashlar Facings, Dressed Stonework And Precast Concrete Articles. , Pre - Cast Cement Concrete 1:3:6 Type C-1, (20Mm Graded Stone Aggregate) Block Masonry With Solid Blocks Built In Cement Mortar 1:4 , Demolition Of Un-Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For. , Material And Labour For Plain Cement Concrete Type C2 1:3:6 (40Cm Graded Aggregate) As In Foundation Of Drains Complete All As Directed , Material And Labour For Plain Cement Concrete Type B0 1:2:4 (12.5Mm Graded Aggregate) As In Haunching Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Material And Labour For Plain Cement Concrete Type B1 1:2:4 (20 Mm Graded Aggregate) As In Coping Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Rendering 15 Mm Thick In Cement Mortar (1:4) On Brick Surface And Finishing Plastered Surface With Using Extra Cement, Complete All As Specified And Directed. , Material And Labour For Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Concrete Using Extra Cement Including Form Moulds Mitered/Stopped Ends Etc , Material And Labour For Extra For Forming Fair Finished Drain Or Channel For Additional 25 Mm Inner Girth Over Or Under 30 Cm In Cement Concrete Using Extra Cement Including Form Moulds Mitered/Stopped Ends Etc All As Specified , Material And Labour For Plain Cement Concrete 1:3:6 Type C2 (Using 40 Mm Graded Granite Stone Aggregate) In Concrete Bed To Drain Pipes Including Packing Under And Haunching Against The Sides Of Pipes After They Are Laid And Tested For Pipes Of 300 Mm Bore. , Supply And Fix Reinforced Cement Concrete Class Np 2, 300 Mm Bore Pipes Laid And Jointed Complete With Collars. , Material And Labour Demolition Of Cement Concrete Of Any Description And In Any Position Not Otherwise Specially Provided For And Demolition Procedure Like Cutting Out Of Full Depth Of (100 To 450Mm) Existing Damaged/Shattered Concrete Slab With Diamond Wheel Cutter Or Carbide Tipped Wheel Saw To Provide A Pressure Relief Cut Within The Patch Area Prior To Boundary Sawing, In Proper Rectangular, Square Or Triangular Shape Perimeter Without Disturbing Adjacent Slab, After The Repair Area Is Isolated By Full - Depth Saw Cuts, Making Small Pieces, Lift And Removing The Deteriorated Concrete Slab Pieces From Its Position And Removing To A Distance Exc 1.5 Km But Not Exceeding 5 Km And Depositing Where Directed Complete All As Specified. , Providing And Laying Dry Lean Concrete (Dlc) 100Mm Thick Of Aggregate Gradation As Per Table 1 Of Sp 49:2014 Having 7 Days Average Compressive Strength Not Less Than 7 Mpa. Minimum Cement Content Not Less Than 140 Kg/Cum Dlc Mixed In Batching Plant, Transported To Site And Laid By Electronic Sensor Paver Including Spreading And Compacting Using High Amplitude Tamping Bars Of Paver (Initial Compaction) Further By Double Drum Smooth Wheeled Vibratory Rollers With 80-100 Kn Static Weight To Achieve Minimum Dry Density, Necessary Finishing Etc Complete All As Per Specified And Tolerances To Be As Per Table 900-1 Of Morth Specifications For Road And Bridge Work 2013. , Supplying And Laying 400 Micron Thick Hdpe Sheet (Virgin Quality|) Water Proof, Wrinkle Free Without Puncture Having Minimum Weight 390Gm/Sqm Over Tack Coat/Sand Cushion As Specified In The Design With Overlap Between Adjacent Strips And At Transverse Joints As Minimum 300Mm Complete All As Specified And As Directed By Engr-In-Charge. Note: Sand Layer Shall Be Measured And Paid Separately And Overlapping Of Hdpe Sheet Shall Be Included In This Unit Rate. , Material And Labour For 10 Mm Thick Sand Cushion With Clean River Sand Duly Clear Of Residual, Organic And Deleterious Materials Spread Evenly To Uniform Thickness Laid Over Dlc Layer As Specified And Directed. (No Additional I Amount To Be Paid For Overlap) , Pavement Quality Concrete (Pqc) Of Minimum 28 Days Field Flexural Strength Of 45Kg/ Sqcm Or 4.5 Mpa, Aggregate Gradation As Per Table 3 Of Irc 15-2017, Coarse Aggregate Of Clean, Hard Strong, Dense, Non-Porous And Durable Pieces Of Crushed Stone Or Gravel, Fine Aggregates Of Clean Natural Sand Or Crushed Stone Sand Or Combination Of Both Using Minimum 360 Kg/Cum Of Cement With Non-Circular, Virgin Synthetic Fibre Of 12-18 Mm Length, Specific Gravity 1.34 To 1.39. Uv Stable, Alkali Resistant, With Equivalent Dia 15-40 Micron, Minimum Melting Temperature As 240 C And Minimum Tensile Strength Of 300 Mpa And At The Rate Specified By The Manufacturer. Pqc Laid, Spread And Compacted With Slip-Form Paver Of Minimum 7.50 M Width, Including Curing And Tinning By Texturing Cum Curing Machine Complete All As Per Specified And Directed. Required Surface Texturing To Be Done As Specified In Clause 10.1, 14 And Table 9 Of Irc 15-2017. , Supply Only Polyester Triangular/ Non Circular Synthetic Fiber Reinforcement All As Manufacturer Instructions Complete All As Specified And Directed. , Material And Labour For Cutting Of Construction Joints 25 Mm Deep And 10 Mm Wide By Early Entry Saw Cut Using Diamond Bicutter Of Appropriate Size, Straight And Smooth Edges. Joint Cleaned Thoroughly With Application Of Compressed Air. Joint Shall Be Made Dry, Vacuum Cleaned And Free Of Dirt, Oil, Vegetation And Other Debris Application Of Two Coats Of Primer With Thin Brush By Forward And Backward Movement At An Interval Of 30 Minutes Before Placing The Backup Rod And Pouring The Sealant. Placing Of Closed Cell Medium Density, Crossed Linked Polyethylene Foam Backup Rod Of 12 Mm Dia, Application Of Bond Breaker Tape On Top Of Back Up Rod For Complete Width Of The Joint And Filled With Polyurethane Based Sealant Complying With Bs-5212, Bs 4254 And En- 141875-2003 With Minimum Movement Accommodation Factor (Maf) Of +I- 30% Having Minimum 10 Year Performance Guarantee, Applying Masked Tape On The Edges Of Joints And Removing The Masking Tape After Filling Of Sealant As Per The Method Specified By The Manufacturer Complete As Specified And Directed , Material And Labour For Forming 25 Mm Width Expansion Joint In Concrete Slab For Full Depth Of Poc. Early Entry Saw And Subsequent Cutting By Using Diamond Bit Cutter O Appropriate Size. Straight And Smooth Edges. Join Cleaned Thoroughly With Application Of Compressed Air. Joint Shall Be Made Dry, Vacuum Cleaned And Free Of Dirt, Oil, Vegetation And Other Debris. The Join Then Filled With Pre-Molded 25 Mm Thick Compressible Polyethylene Closed Cell Type Filler Board As Specified Thereafter Application Of Two Coats Of Primer With Thin Brush By Forward And Backward Movement At An Interval Of 30 Minutes Before Placing The Backup Rod And Pouring The Sealant Placing Of Closed Cell Medium Density, Crossed Linked Polyethylene Foam Backup Rod Of 30 Mm Dia, Over Filler Board And Filled With Polyurethane Based Sealant Complying With Bs 5212, Bs 4254 And En-141875-2003 With Minimum Movement Accommodation Factor (Maf) Of+/- 30% Having Minimum 10 Year Performance Guarantee Applying Masked Tape On The Edges Of Joints And Removing The Masking Tape After Filling Of Sealant As Per The Method Specified By The Manufacture Complete As Specified And Directed. , Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors/Dado, Aprons Etc Laid Bedded And Pointed In Any Mortar , Material And Labour For Machine Pressed Precast Concrete Interlocking Paver Block Any Shape And Size Confirming To Is 15658-2006 Of 80 Mm Thickness, M-40 Grade With Grey Cement And Pigment All As Specified. , Material And Labour For Providing, Cement Concrete Type B1 ,1:2:4 Using 20 Mm Graded Stone Aggregate In Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges All As Specified. , Note For All Items Due To The Non-Availability Of The Runway/Airfield During Daytime, The Site May Be Made Available For Execution Of Work During Night Hours On Certain Occasions, Subject To Operational Requirements And Availability. The Contractor Shall Make All Necessary Arrangements For Adequate Lighting And Other Safety Measures Required For Carrying Out The Work During Night Time. The Rates Quoted By The Bidder Shall Be Deemed To Be Inclusive Of All Costs Associated With Execution Of Work During Night Hours, And No Additional Payment Shall Be Admissible On This Account.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 10
27.
Defence #11405410 Technical Bid
Tender for Taking Down Cement Plaster On Brick Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And As Directed. , Demolition Of Brick Work Or Stone/Boulder Masonry, Built In Cement Mortar Including All Quoins,Arches, Pillars, Etc But Excluding Ashlar Facing, Dressed Stonework And Precast Concrete Articles Complete All As Specified And As Directed By Engineer-In-Charge. , M&L Brick Work With Sub-Class ‘B Bricks (With Old Size Bricks), Straight Or Curved On Plan Exc. 6.0 Metre Mean Radius, Built In Cement Mortar (1:6) Complete All As Specified And As Directed. , M&L For Half Brick Work Burnt Modular Bricks Built In Cement Mortar (1:4) Straight Or Curved On Plan Exceeding 6Mtr Mean Radius And Complete All As Specified And As Directed. , M & L For Plain Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Aggreagte As In Coping Bed Block Etc Complete All As Specified And Complete All As Specified And As Directed. , M&L Plain Cement Concrete In Surface Channels,Benching In Sewers,Drains Etc Type B1 (1:2:4) Using 20 Mm Graded Stone Aggregate Complete All As Specified And As Directed. , M & L For Redndering In Cement Mortar (1:4) 15Mm Thick On Concrete /Brick Masonry Wall Surfaces, Complete All As Specified And As Directed.. (Note Wpc Paid Separetely) , M&L Pre-Cast Reinforced Cement Concrete (1:2:4) (20Mm Graded Aggregate) In Cover Slab Of Manholes, Septic Tanks, Etc., Set In Cement Mortar 1:4 Including Demolition Of Existing Reinforced Cement Concrete Slabs ., Complete All As Specified And As Directed. Note : Reinforcement Will Be Measured And Paid Separately Under Appropriate Items. , M&L Tmt Bars 10Mm Dia And Overcut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping For Columns Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.90Mm Dia, Complete All As Specified And As Directed. , M&L Two Coats Of Cement Base Paint Over A Coat Of Primer On New Wall Surface Including Preparation Of Surface. Complete All As Specified And As Directed. , M&L Preparation Of Old Surface Of Wall And Applying One Coat Of Cement Base Paint Complete All As Specified And As Directed. , Dismantling Plain Or Corrugated Asbestos Sheeting Any Thickness In Roof Covering. Complete All As Specified And As Directed. , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering Fixed With Self Tapping Screws Complete All As Specified And As Directed.. , Taking Down/Dismantlinig Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Proveded Complete All As Specified And As Directed. , S&F Rolled Sections As In Main And Cross Beams, Hip And Jack Rafters; Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates To Fe-290 (Gde E- 165) Complete All As Specified And As Directed. , Dismantling Posts Or Struts (Wood, Steel Or R.C.C.) Any Section, Including Taking Out Embedded Portion & Making Good Disturbed Ground Embedded In Concrete, Brick Work, Masonry, Etc. Complete All As Specified And As Directed. , Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In & Raming Earth/ Broken Rubble Mixed With Earth Around, In Layers N. Exc. 25Cm, Watering, & Removing Surplus Soil To A Distance N Exc 50M & Making Good Surface In Soft/Loose Soil. Complete All As Specified And As Directed. , M&L Plain Cement Concrete In Foundations, Filling And Mass-Concrete Type B2 (1:2:4) Using 40 Mm Graded Stone Aggregate Complete All As Specified And As Directed. , M&L For Ms Work For Fencing Post And Struts Made From Angle Iron And Flat Iron In Any Section Including Cutting Tops To Shape , Drilling Holes And Notching For Fixing Of Wires Etc Confirming To Fe -290 Or Fe -330, With And Incl Necessary Nut And Bolts Of 12Mm Dia Of Reqd Length Complete All As Specified And As Directed. , M&L, Ms Round Bars 10 Mm Dia And Over Cut To Length, Bent To Shape Reqd Incl Cranking Bending Etc And Binding With Ms Wire (Annealed) Not Less Than 0.9 Mm Dia As In Chain Link Fencing Fixing Fe-410-W (Gde.E-250) Quality-A Orfe 290 (Gde -E-165) Complete All As Specified And As Directed. , Preparing Steel Surfaces By Mechanical Cleaning/Sand Blasting And Applying One Coat Zinc Rich Epoxy Primer And Two Coats Aliphatic Two Component Polyurethane Paint Complete All As Per ManufacturerS Instruction And Complete All As Specified And As Directed. , Applying Two Coats Of Synthetic Enamel Paint On Steel & Iron Surfaces Of Any Description, Not Otherwise, Described, Over 10Cm Width Or Girth Including Preparation Of New Surface & Applying One Coat Of Red Oxide, Zinc Chrome Complete All As Specified And As Directed. , All As Per Item No Above Herein Before But Not Exceeding 10Cm Wide Or Girth. Complete All As Specified And As Directed. , M&L For Mild Steel Work For Securing Of Chain Link Fencing And Similar Small Articles Etc Confirming To Is-15911 Complete All As Specified And Directed. , S & F Ms Screw Bolts 5 To 10Mm Dia (Machine Made) With Hexagonal Or Square Head At One End, Screwed End To Be Fitted With Washer And One Hexagonal / Square Nuts And 5 To 10 Cm Long All As Specified And Directed. , S&F In Repairs For Galvanised 2 Strand Steel Barbed Wire 2.24Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacing And Straining And Fixing To Any Type Of Standard Rails Straining Bolts Including Securing Or Tying At Cross With And Provision Of Galvanised Mild Steel Wire, Staples Or Steel Pins Etc Complete All As Specified And As Directed. (Each Line To Be Measured Separately) , Dismantling Fencing Wire Mesh, Any Type All Directed By Engineer-In-Charge Complete All As Specified And As Directed. , Fixing Only Chain Link Fencing Including Line Wires, Any Mesh, Size And Type To Any Type Of Standards, Rails, Straining Bolts, Etc.Including Provission Of Binding Wire Complete All As Specified And As Directed. , Supply Only Chain Link Ms Galvanisd Fencing, Any Size Or Type Complete All As Specified And As Directed. , M&L For Reinforced Cement Concrete Work (1:1.5:3) (20 Mm Graded Stone Aggregate )As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams,Bases For Columns Including Demolition Of Existing Reinforced Cement Concrete Complete All As Specified And As Directed. , M&L For Reinforced Cement Concrete Work (1:1.5:3) (20 Mm Graded Stone Aggregate) Columns, Pillars, Piers, Posts And Struts Including Demolition Of Existing Reinforced Cement Concrete Complete All As Specified And As Directed , M&L Formwork To Sides Of Concrete Foundations, Footings, Bases Ofcolumns, Raft And Raft Beams,Sides And Soffits (If Any) Of Foundation And Plinth Beams;And Similar Work; Vertical Or To Batter Flat Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed. , M&L Formwork To Formwork To Sides Of Pillars,Posts, Struts, Piers, Columns And Stanchions Square, Circular Rectangular Or Polygonal Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed. , Mild Steel Tmt Bar 10Mm Dia And Over Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hoping For Columns Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed. , Mild Steel Tmt Bar 5Mm Dia And Over Upto And Including 10Mm Dia As In Stirrups, Spacers & Binders Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hoping For Columns Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed. , S&F For Ms Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) And Hanging; Also Fastening And Fixing Confirming To Fe 410,E-250 Qualitry A Including Dismantling Wrought Or Mild Steel Work Of Any Description Not Otherwise Provided For Complete All As Specified And As Directed. , M& L For Granite Of Any Type 18-20Mm Thick Cut Beded And Jointed With Grey Cement Slurry And Pointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding And Polishing Complete In Vertical Surfaces Of Wall Incl 10 Mm Thick Backing Coat In Cm 1:4 Including Demolition Of Stone Slabs Tiles Of Any Description Or Thickness In Floors Aprons Laid Bedeed And Pointed In Any Morter And Any Position. Complete All As Specified And As Directed. , Demolition Of Un- Reinforced Cement Concrete In Ground Floors And Pavings Not Exceeding 15 Cm Thickness. (Below Or Above Ground Level) Complete All As Specified And As Directed. , M&L For 100 Mm Thick Plain Cement Concrete (1:3:6) Type D-2 Using 40Mm Graded Stone Aggregate As In Subbase/Footpath Necessary Form Work, Complete All As Specified And As Directed. , M&L For 75 Mm Thick Plain Cement Concrete (1:3:6) Type D-2 Using 40Mm Graded Stone Aggregate As In Subbase/Footpath/Plinth Protection Necessary Form Work, Complete All As Specified And As Directed. , M&L For 50 Mm Thick Plain Cement Concrete (1:3:6) Type D-2 Using 20Mm Graded Stone Aggregate As In Subbase/Footpath Necessary Form Work, Complete All As Specified And As Directed. , M&L For Providing And Laying 60Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour, Design & Pattern As In Footparth, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc., Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compacted Bed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand Incl Demolition Of Old Paver Block, Complete All As Specified And As Directed. , M&L For Pre-Polished Glazed Designer Endura Tiles/Dura Stone, Coloured, 30Cm X 30Cm X 10Cm Thick , Set, Jointed And Pointed In Neat Cement Slurry, Pointed In White Or Coloured Cement To Match In Floors Over 15Mm Thick Screed In 1:4 Including Dismantling Of Old Tiles Complete All As Specified And As Directed. , M&L Heavy Duty Coloured Ceramic Tiles As In Steps,Stairs In Single Piece Set And Jointed In Neat Cement Slurry And Pointed In White Cement Mixed With Pigment To Match The Colour Of Tiles Over And Including 15 Mm Thick Screed Bed Or Bedding Layer In Cm (1:4) Including Dismantling Of Old Heavy Duty Tiles, Complete All As Specified And As Directed By Engr-In-Charge , S&F In Repair 450Mm Bore Reinforced Concrete Pipes, Class Np2, Laid And Jointed Complete With Collars Including Dismantling Of Cast Iron Or Reinforced Concrete Drain Pipes, Jointed In Cement Mortar And Taking Out Of Trenches,Inclunding Concrete Bed In Plain Cement Concrete (1:3:6) Packing Under, & Haunching Against The Sides Of Pipes After They Are Laid & Tested Complete All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 10
28.
Defence #11403945 Price Bid
Tender for Contract Details , Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For Any Work As Directed And Specified . , M&L For Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate) As In Roof Padding, 40Mm Thick, Finished The Surface Fair And Even All As Specified And As Directed. , M&L For Screeding 10Mm Thick In Cm 1:4 Using Water Proofing Compound, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. Note:- Water Proofing Compound Shall Be Measured And Paid Separately Under Respective Item Of Sch A (Boq). , Supplyt Only Liquid Water Proofing Compound Complete All As Specified And As Directed , Material And Labour For App Based Polymeric Water Proof Membrane, Minimum 3 Mm Thick And Weighing Not Less Than 3.6 Kg Per Square Metre, Black Finish Reinforced With Non Woven Polyster Matt With Thermo Finish Laid Over Compatible Bitumen Primer @ 0.30 Liters Per Square Metre And Applying A Layer Of Blown Grade Bitumen (Conforming To Is -702) 85/25 @ 1.20 Kg/Sqm With Help Of Torching With A Proplane Or A Butane Gas Using Torch With Minimum Overlap Of 75 Mm At Side And 100 Mm At Ends And Sealing Including Applying A Coat Of Cold Emulsion Bituminous Primer All As Per Manufacturers Instructions.Complete All As Specified And As Directed. For Parapet The Membrane Will Be Taken To A Height Of 30 Cm And Then Inserted Inside The Parapet In A Groove (No Separate Payment Will Be Made And The Measurement Will Be Done For Horizontal Surface ).Including Applying A Coat Of 85/25 Penetration Industrial Bitumen Over Top Surface @ 1.2 Kg/Sqm And Binding Materials Such As Sand In Dry Condition @ 0.5 To 1.00 Kg/Sqm Shall Be Dusted Over The Bitumen Complete All As Specified And As Directed. (Note :- 1. App Based Polymeric Water Proofing Membrane Shall Be Purchased Directly From The Manufacturer Or Their Authorized Distributors) . , Taking Up Or Down Steel Tubing 15Mm Bore And Connection Including Cleaning For Refixing Complete All As Specified And Directed. , Refixing Old Serviceable 15 Mm Gi Tubing And Connection In New Or Old Position (Wall, Ceiling Floor Etc.) Including Necessary Fittings&Fixtures Ie. Union, Nipple, Socket Etc. Complete All As Specified And Directed , Supply And Fix 15 Mm Bore Medium Grade Galvanised Steel Tubing With All Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floor Complete Incl Ie. Union, Nipple, Socket Etc. All As Specified And Directed. , Taking Up Or Down Steel Tubing 20Mm Bore And Connection Including Cleaning For Refixing Complete All As Specified And Directed. , Refixing Old Serviceable 20 Mm Gi Tubing And Connection In New Or Old Position (Wall, Ceiling Floor Etc.) Including Necessary Fittings&Fixtures Ie. Union, Nipple, Socket Etc. Complete All As Specified And Directed , Supply And Fix 20Mm Bore Medium Grade Galvanised Steel Tubing With All Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floor Complete Incl Ie. Union, Nipple, Socket Etc. Complete All As Specified And Directed. , Supply And Fix For 1000 Litre Capacity Rotational Moulded Polythylene Water Storage Tanks (Cylindrical Vertical With Closed Top ) Hoisted And Fixed In Position Including Dismantling Of Existing Water Tanks Of Syntax Complete All As Specified And Directed. , Supply And Fix For 500 Litre Capacity Rotational Moulded Polythylene Water Storage Tanks (Cylindrical Vertical With Closed Top ) Hoisted And Fixed In Position Including Dismantling Of Existing Water Tanks Of Syntax Complete All As Specified And Directed. , S&F In Repairs Vitreous China Wash Hand Basin, White, Size 550 X 400 Mm Including Brackets, Chromium Placted Waste Coupling &Pvc Waste Pipe Of 32 Mm Dia Complete All As Specified & Directed. , S&F In Repair For 15 Mm Bore Dia Of Pipe Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High Density Plastic Ball Screwed For Iron Pipe And Fixed (Min Weight 20Mm - 210 Gms) Comnnection Complete All As Specified , S&F In Repair For 20 Mm Bore Dia Of Pipe Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High Density Plastic Ball Screwed For Iron Pipe And Fixed (Min Weight 20Mm - 210 Gms) Comnnection Complete All As Specified , S&F (In Repair) 15 Mm Bore Fancy Type Long Body Bib Taps Brass Chromium Plated Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Including Flench Complete All As Specified & Directed. , S&F (In Repair) 15Mm Bore Pillar Taps, Brass Chromium Plated, Fancy Type Screwed Down High Pressure With Or Without Lettered, Hot Or Cold With Long Screwed Shanks And Fly Nuts, Screwed To Iron Pipe Complete All As Specified & Directed. , S&F In Repair 15 Mm Dia Chromium Plated Angle Cocks/Stop Valves, Brass, Screwed Down, High Pressure With Crutch Or Butterfly Handle, Flench Screwed Both Ends For Iron Pipe Or For Union Complete All As Specified & Directed. , S&F In Repairs 15 Mm Bore Concealed Stop Cock, Chromium Plated, Long Shank Copper Alloy, Screwed Down With Crutch Or Butterfly Handle Screwed Both Ends Complete All As Specified & Directed. , S&F For 600 X 450 Mm Beveled Edge Mirror Of Selected Quality Glass Mounted On 6Mm Thick Ac Building Board Or Commercial Ply Wood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers In Repairs Complete All As Specified & Directed. , Vitreous China Urinals, Bowl Type (Back Or Corner Wall Type),Complete Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs Withand Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets,Flush Pipe,Grating And Union For Discharge Pipe. (Exclusive Of Fixing Supply Pipe To Flushing Cistern, Trap And Waste Pipe) , M&L 20Mm Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Plat Forms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite , Providing Edge Moulding To 18-20Mm Thick Granite Stone Of Counters Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed , M&L For Non - Skid Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:6 Complete All As Specified And Directed , M&L For Glazed Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Vertical Surface 350X 250X 7 Mm/ 450X 350X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Over And Including 10Mm Thick Plaster In Cement Mortar 1:4 Complete All As Specified And Directed , S&F Kitchen Plate Rack In Repair Of Stainless Steel Of Size 720Mm X 600Mm X 230 Mm Made Out Of 1 Mm Thick Steel Sheet Complete All As Specified & Directed. , M&L Complete Removal Of Existing Treatment And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Alkali Resistant Priming Paint. , Cleaning Of Storage Water Tank Of Pvc/Hdpe Exc. 250 Ltrs But N. Exc 500 Ltr Capacity Staged Over Reinforced Cement Concrete Roof/Floor Slab Or Similar Place Inside /Outside Bldgs By Removing Float Valves Carefully, Thoroughly Cleaning The Wall, Floor And Ceiling Of The Tanks, Mouth Of Pipe Etc, Removing The Dirty Water, Sludge And Other Depositions To A Distance Not Exceeding 50 Mtr To Make The Tank Totally Dirtfree And Finally Cleaning The Water Tank With Fresh Water Till Water Becomes Clear To Entire Satisfaction Of Eng-In-Charge And As Specified In Particular Specification And Refixing Of Float Valves All As Specified And Directed , Cleaning Of Storage Water Tank Of Pvc/Hdpe Exc. 500 Ltrs But N. Exc 1000 Ltr Capacity Staged Over Reinforced Cement Concrete Roof/Floor Slab Or Similar Place Inside /Outside Bldgs By Removing Float Valves Carefully, Thoroughly Cleaning The Wall, Floor And Ceiling Of The Tanks, Mouth Of Pipe Etc, Removing The Dirty Water, Sludge And Other Depositions To A Distance Not Exceeding 50 Mtr To Make The Tank Totally Dirtfree And Finally Cleaning The Water Tank With Fresh Water Till Water Becomes Clear To Entire Satisfaction Of Eng-In-Charge And As Specified In Particular Specification And Refixing Of Float Valves All As Specified And Directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Uttarakhand View Result →
29.
Defence #11392800 Technical Bid
Tender for Demolition Of Brick Work /Stone Masonry/Pcc Block Masonry Built In Cement Mortar Of Any Description Complete All As Specified And As Directed , Taking Down Cement Plaster Of Any Description Hacking For Key Or Raking Out Joint On Old Brick Work/ Stone /Concrete Surface Etc Complete All As Specified And As Directed , Demolition Of Stone Slab And Tiles Incl Backing Coat Of Any Description Or Thickness In Floors, Aprons Etc (Laid Dry Or Laid Dry And Pointed) Etc Complete All As Specified And As Directed , Demolition Of Cement Concrete And Paving Not Exc 15 Cm Thick (Below Or Above Ground Level) Complete All As Specified And As Directed. , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description & In Any Position Not Specifically Provided For Complete All As Specified And As Directed , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Etc Complete All As Specified And As Directed , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering Complete All As Specified And As Directed , Demolition And Breaking Up Drain Pipes Up To 100 Mm Dia Bofe (Salt Glazed Ware, Ac Or Reinforced Concrete) Set In Cement Mortar Etc Complete All As Specified And As Directed , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Under Bedding For Interlocking Tiles Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete Type D-2 1:4:8 (With Using 40 Mm Graded Stone Aggregates) As In Foundations And Mass Concrete Etc Complete All As Specified And As Directed , Material And Labour For Cement Concrete Type 1:2:4 B-0, (Using 12.50 Mm Graded Stone Aggregate) As In Surface Channels And Drains Etc Complete All As Specified And Directed. , Material And Labour For Providing Cement Concrete Type 1:2:4 B 0 (12.50Mm Graded Stone Aggregate) In Copings, Leveling Concrete, Kerbs, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Material And Labour For Precast Cement Concrete Type B1, 1:2:4 (Using 20 Mm Graded Stone Aggregate) As In Landings, Cover Slab (For Manholes Etc) And Similar Work Including Necessary Form Work And Set In Cm 1:6 Etc Complete All As Specified And Directed. , Material And Labour For Reinforced Cement Concrete (Nominal Mix) Type B-1 (1:2:4) With Using 20 Mm Graded Stone Aggregates As Columns, Pillars, Piers, Posts, Ftg, Etc Struts Etc Complete All As Specified And As Directed , Material And Labour For Providing 25Mm Thick Precast Cement Concrete Louvres Type B-0 , 1:2:4 (With Using 12.5 Mm Graded Stone Aggregaes) Set In Cm 1:6 As And Jallies, 25Mm Thick (Measured Solid), Including All Mouldings But Excluding Frame (Pre -Cast Frame Shall Be Measured Separately And Paid For Under Item) Etc Complete All As Specified And As Directed , Supply Only Water Proofing Compound. , Material And Labour For Brickwork (Old Size Brick) With Sub Class ‘B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:4 Etc Complete All As Specified And As Directed , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour For 18 To 20Mm Thick Granite Granite Stone Slab (Of Any Type) Work (Table Rubbed And Polished) Granite (Of Any Type) Work For Wall Lining (Veneering To Wall) 12Mm Thick In Cement Mortar (1:3) And Pointing With White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Slab Including Grinding The Edges Half Round Etc Complete All As Specified And As Directed , Material And Labour For Formwork With Square / Rectangular Pillars, Posts, Struts, Piers, Columns And, Ftg Etc, Stanchions With Rough Finished Surface Of Concrete Etc Complete All As Specified And As Directed , Material And Labour Tmt Bar 10Mm Dia And Over Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hoping For Columns Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed , All As Per Item No 21 Above But 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders Etc Complete All As Specified And As Directed , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Trusses, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed Note: To Be Executed For Provison Of Ridges And Hips, Valley Etc Complete All As Specifed And As Directed , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 60 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Supply And Fix Exterior Grade, Coloured Glossy Finish Rubber Pressed, Cement Concrete Designer Chequered Tiles Of Size 30Cm X 30Cm X 25Mm Thick Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment To Match The Shade / Colour / Matrix Of Tiles Over Etc Complete All As Specified And Directed. , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Complete All As Specified And Directed. , Material And Labour For Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Incl Cutting Edges Etc Etc Complete All As Specified And As Directed Complete All As Specified And As Directed , Material And Labour For Machine Cut Kota Stone Slab 18-20 Mm Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed And Jointed With Including 10Mm Thick Rendering In Cm 1:4 Etc Set And Jointed In Neat Cement Slurry Complete All As Specified And Directed. , Material And Labour For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Etc Complete All As Specified And As Directed , Material And Labour For 100Mm Thick Cement Concrete 1:2:4 Type B-2 (Using 40Mm Graded Stone Aggregate ) As In Flooring, Hardstanding Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Etc Complete All As Specified And As Directed , Material And Labour For Rendering For Ceiling 5 Mm Thick In Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surface Finished Even And Smooth Without Using Extra Cement Etc Complete All As Specified And As Directed , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Mixed With Water Proofing Compound As Per Manufacture Instruction Etc Complete All As Specified And As Directed Notes : Wpc Shall Be Measured And Paid Seperately , Material And Labour For Preparing New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Ove A Coat Of Cement Primer Etc Complete All As Specified And As Directed , Material And Labour For Preparation New Plastered Surface Of Wall And Applying Two Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance (Apex Ultima), Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces. Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Ceiling And Applying Three Coats Of White Wash Including Preparation Complete All As Specified And As Directed. , Complete Removal Exising Treatment By Means Of Wire Brushing, Sand Paper, Manually Or Mechanically Up To Visible Of Plastered Surface Incl Rubbing And Washing Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Old Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Etc Complete All As Specified And As Directed , Material And Labour For Preparation Old Plastered Surface Of Wall And Applying Two Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance (Apex Ultima), Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces. Etc Complete All As Specified And As Directed , Material And Labour For Preparation New Of Previously Un Treated Steel And Iron Surface Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Supply And Fix 110 Mm Pvc, Swr Pipes, Single Socketed In Any Length With Rubber Ring Joint Fixed To Walls/Floor Etc Etc Complete All As Specified And Directed , Supply And Fix 75 Mm Pvc, Swr Pipes, Single Socketed In Any Length With Rubber Ring Joint Fixed To Walls /Floor Etc Complete All As Specified And Directed , Supply And Fix Pvc Bends (Any Radius) Of 110Mm Dia With Access Door Etc Complete All As Specified And As Directed , Supply And Fix Pvc Bends (Any Radius) Of 75Mm Dia With Access Door Etc Complete All As Specified And As Directed , Material And Labour For Spraying Antiweed / Non Toxic Solution / Chemicals Containing Glyphosate As Per Manufacture Instructions And Removing The Weed Including The Roots After Ensuring Complete De-Germification Of Palnt/Weed And Cutting Down The Plant/Trees Off From Roof/Top Sides Of External Walls Of Bldgs, In Chajjas, Wall Junctions, Junctions Of Gi/Ci/Ac/Pvc Pipes And Taking Out Roots Entered In Wall/Slabs, Including Making Good The Surface Using Plain Cement Concrete 1:2:4 Type B1 Or Cement Mortar (1:2) Or Brick Work In Cm(1:4) Plastered With Cm(1:4) To Match With Existing Surface And Repairing The Pipes And Joints Which Was Affected By Cutting Down/Taking Out Process All As Specified And As Directed For Plants / Trees Located In The Buildings At Any Height Of Bldgs, Complete All As Specified And Directed. , Maintenance/Cleaning Of Masonry Of Concrete Drains ( Cross Sectional Area Not Exceeding 1.20 Sqm) By Desilting Of All Deposited Soil/Silts And Other Materials Including Removing All Vegetation From Side And Bottom Of Drains To A Distance Exceeding 250M And Not Exceeding 500M And Depositing In Layers Not Exceeding 25Cm Thick Complete To The Original Shape Of Drains And Free Flow Of Water And Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
30.
Defence #11392756 Technical Bid
Tender for Demolition Of Brick Work /Stone Masonry Masonry Built In Cement Mortar Of Any Description Complete All As Specified And As Directed. , Demolition Of Stone Slabs And Tiles Laid Dry And Dry Or Pointed Of Any Description Or Thickness Infloors, Aprons Etc Complete All As Specified And As Directed. , Taking Down Shutters Of Any Description Exc 1 Sq. M And N Exc 2 Sq. M Each Removing To Store Complete All As Specified And As Directed. , Demolition Of Cement Concrete And Paving Not Exc 15 Cm Thick (Below Or Above Ground Level) Complete All As Specified And As Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Area N.Exc. 1.5 Sqm Including Builders Hardware Each Complete All As Specified And As Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Area Exceeding 1.5 Sqm But Not Exceeding 4 Sqm Each Including Builders Hardware Complete All As Specified And As Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering Complete All As Specified And As Directed. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Etc Complete All As Specified And As Directed , Dismantling Wall And Ceiling Boards Or Insulation Boards, Any Thickness, Any Description, Including Cover Fillets Complete All As Specified And Directed. , Taking Down Cement Plaster Of Any Description Hacking For Key Or Raking Out Joint On Old Brick Work/ Stone /Concrete Surface Etc Complete All As Specified And As Directed , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding But Not Backing Complete All As Specified And As Directed. , Excavating In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surfaces In Soft/Loose Soil Complete All As Specified And As Directed. , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Under Bedding For Interlocking Tiles Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete Type D-2 1:4:8 (With Using 40 Mm Graded Stone Aggregates) As In Foundations And Mass Concrete Etc Complete All As Specified And As Directed , Material And Labour For Providing Cement Concrete Type B0 1:2:4 (Using 12.50Mm Graded Stone Aggregate) In Copings, Parapets And, Kerbs, Water Troughs/ Chajjas And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Material And Labour Brickwork (Old Size Brick) With Sub Class ‘B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:4 Etc Complete All As Specified And As Directed , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Jambs, Pillars, Window- Cills,Cooking Platforms, Working Table And Like Over 20 Mm Thick Screed Bed Or Bedding Layer In Cement Mortar (1:4), Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite , Material And Labour For 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) For Wall Lining (Veneering To Wall) 10Mm Thick In Cement Mortar (1:3) And Pointing With White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. , Supply And Fix 30 Mm Thcik Flush Shutters, Solid Core Construction, With Block Board Core And Plywood Face Panels, Commercial Type On Both Sides Complete All As Specified And As Directed. , Supply And Fix 30Mm Thick 2Nd Class Hw Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc.Divided Into Squares, With Plain,Chamfered Or Rounded,Mitred And Rebated Sash Bars,Any Numbers, Edges Of Framing Plain,Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass,Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed. , Supply And Fix Solid Pre Lam Pvc Door Frame/Chowkhat Of Size 50 X 47Mm Made Out Of 5Mm Prelam Pvc Sheet Reinforced With M.S. Square Tube 15Mm X 15Mm. The Two Vertical Door Profiles Are To Be Reinforced With 40Mm X 20Mm Ms Tube 19 Guage. Door Frame Need To Be Fixed To Wall Using 100 Mm Long Ms Screws Etc Complete. , Supply And Fix Factory Made Solid Panel Pre Lam Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes 19 Guage Thickness And Size Of 40Mm X 20 Mm For Stiles, Top,Bottom And Lock Rails. M.S. Frame Shall Be Covered With Heat Moulded Prelam Pvc ‘C Channel Having A Pvc Sheet Strip Of 30Mm Width Stuck Inside With Solvent Cement. 110 Mm Width Forming Stiles In Which 100Mmm Should Be Flat And 5 Mm Should Be Tapered, And 5 Mm Thich, 135 Mm Wide Prelam Pvc Sheet For Top And Bottom Rail In Wchich 125 Should Be Flat And 5 Mm Should Be Tapered On Either Side Of Panel, Also For Lock Rail 145 Mm Sheet, 125 Should Be Flat And 5 Mm Tapered On Either Side. And Additional 5 Mm Thich Pvc Strip Struck Inside Of C Channel. And Prelam Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Prelam Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement Etc Complete , Supply And Fix 100 Mm Size Stainless Steel Butt Hinges, Complete All As Specified And As Directed. , Supply And Fix 200 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section Complete All As Specified And As Directed. , Supply And Fix 150 Mm Long Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section Complete All As Specified And As Directed. , Supply And Fix 150 Mm Extruded Aluminum Alloy Handles, Fabricated Type, Anodized Complete All As Specified And As Directed , Supply And Fix 300 Mm Long Aluminum Alloy Anodised Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Steel, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminum Alloy Complete All As Specified And As Directed. , Supply And Fix Stain-Less Steel Wire Cloth, 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40 Mm And Fixed With Stainless Wire Staples Complete All As Specified And As Directed. , Supply And Fix As In Repair Aluminium Extuded Section Body Door Closer Hydraulically Regulated, Designation No. 3,Universal Type, Suitable For Door Shutters Of 851 To 1000 Mm In Width And Of Weight Between 61 To 80 Kg Complete All As Specified. , Taking Down And Refixing Aluminium Window, Shutters And Making Unserviceable Shutter To Serviceable Shutter (Which Incls Replacing Roller,Rubber Beading Etc) Complete All As Specified And Directed. , Providing And Fixing Powder Coated Aluminium (Minimum Thicknesss Of Powder Coating 50 Micron) Work For Doors, Windows, Ventilators And Partitions (Fixed Portions) With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Confirming To Is-733 And Is- 1285, Fixed With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E At Top, Bottom And Sides With Required Epdm Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 105Mmx60mmx1.25Mm With Double Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified, Supplied And Fixed , Supply And Fix Pressed Steel Frames For Doors Of Size 125Mmx60mmx1.25Mm With Single Rebate Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified, Supplied And Fixed , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Trusses, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Framed Work Such As Grills, Gratings, Etc.. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.Gde-E-165 Complete All As Specified And Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed Note: To Be Executed For Provison Of Ridges And Hips, Valley Etc Complete All As Specifed And As Directed , Supply And Fix Suspended False Ceiling Using E-Grid 2430, 180 Gsm (Exposed Ceiling Suspension System ) Of Grid Size 600Mmx600 Mm With Main Runner 32 Mm X 24 Mm And Wall Angle 24Mm X 24Mm Using 4Mm Thick High Pressure Stean Crude Everest Non Asbestos Fiber Cement Plain Board (E-Board Classic) In & Including A Grid Of Gi System Duly Suspended With 4Mm Dia Gi Wire Hanger Fixed With Steel Dash Fasteners Or Iron Purlin From The Roof With Adjustment Clip Providing Positions For Light Fixtures,Air Conditioning Diffuser And Ducts ,Sprinkler ,Smoke Detectors Etc.The Main Runners To Be Secured To Structural Soffits By Hanger @ 1220 Mm Maximum C/C. The Last Hanger At The End Of Each Main Runner Should Not Be Placed At More Than 450Mm From The Adjucent Wall,Flush Fitting 1220 Mm Cross Tee To Be Interlocked Between Main Runners @ 610Mm C/C,So As To Form 600Mm X 600 Mm Grid Complete All As Specified And Directed. , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 60 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:6) Complete All As Specified And Directed. , Supply And Fix For Exterior Grade, Coloured Glossy Finish Rubber Pressed, Cement Concrete Designer Chequered Tiles Of Size 300Mm X 300Mm X 25Mm Thick Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment To Match The Shade / Colour / Matrix Of Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:6) Complete All As Specified And Directed. Etc Complete All As Specified And Directed. , Material And Labour For Double Charged Vitrified Ceramic Tiles Light Shade 9 To 10Mm Thick (Square/Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm, Laid In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed In Cm 1:6 Complete All As Specified And As Directed. , Material And Labour For Double Charge Vitrified Ceramic Tiles, Light Shade, 9 To 10Mm Thick (Square/Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm,, In Skriting Dado Etc., Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Colour Of Tiles, Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed. , Material And Labour Non Skid Coloured Ceramic Tiles 7 To 8Mm Thick, (Square/Rectangular) Area Of Each Tiles Exc 0.06 Sqm But Not Exc 0.11 Sqm As In Floors Set And Jointed In Cement Slurry And Pointed In White Cement Mixed With Colour Pigment To Match Existing Surfaces With 15 Mm Thick Screed Bed In Cement Mortar (1:6) Including Dismantling Of Old Unserviceable Tiles Complete All As Specified And Directed. , Material And Labour For Glazed Light Coloured/Printed Ceramic Tiles 450X300x7mm Thick In Vertical Surfaces Such As Skirting, Dado Etc Set And Jointed In Neat Cement Slurry, Pointed In White Or Coloured Cement To Match Colour Of Tiles, Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed. , Material And Labour For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular) Area Of Each Tiles Exc 0.18 Sqm But Not Exceeding 0.38 Sqm In Floor Etc Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match With Coloured Tiles Over 15Mm Thick Screed Bed In Cement Mortar 1:6 Complete All As Specified And Directed. , Material And Labour For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular )Area Of Each Tiles Exc 0.18 Sqm But Not Exceeding 0.38 Sqm On Vertical Surfaces As Skirting Etc Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match With Coloured Tiles Over 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For 100Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate ) As.In Floor Finishing Even And Smooth With Out Using Extra Cement Complete All As Specified And As Directed , Material And Labour For 10Mm Thick Rendering On Other Than Fair Faces Of Brick Wall In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement With Using Wpc @3% By The Wt Of Cement. Wpc Shall Be Measured And Paid Seperately. , Supply Only Water Proofing Compound. , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Wall And Applying A Coat Of Alkali Primer And Two Coats Of Acrylic Distemper Complete All As Specified And Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Acrylic Exterior Weather Coat Paint (Weather Proof Paint With Quality Of Dust Guard, Anti Algal And Anti Fungal Paint With Minimum 05 Years Performance Warranty, Make: Berger Weathercoat Anti Dustt Or Equivalent Of Asian Paint Or Nerolac) Over A Coat Of Approved Primer Over 1Mm Thick Water Proof Putty Of Same Manufacturer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Wall Surface And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , Supply And Fix Sheet Glass 4.0 Mm Thick Ordinary Quality And Glazing With Oil Putty/ Wooden Beads/ Aluminium Window In Squares Not Exc. 1.00 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For Preparation Of New Or Previously Untreated Surface Of Wood Or Wood Based Materials Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer All As Specified. , Material And Labour For Preparation Of New Steel And Iron Surfaces Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Supply Hoisting And Fix 500 Ltrs Rotational Moulded Polythene Water Storage Water Tanks Twin Layered Construction ( Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Duly Isi Marked, 20Mm Gi Light Grade Over Flow Pipe Approx Length 1.5M Long, 20Mm Gi Medium Grade Pipe For Wash Out Approx Length 2.00 M Duly Plugged At One End Shall Be Provided Including Dismantling The Existing Tank Complete All As Specified. , Supply Hoisting And Fix 1000 Ltrs Rotational Moulded Polythene Water Storage Water Tanks Twin Layered Construction ( Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Duly Isi Marked, 20Mm Gi Light Grade Over Flow Pipe Approx Length 1.5M Long, 20Mm Gi Medium Grade Pipe For Wash Out Approx Length 2.00 M Duly Plugged At One End Shall Be Provided Including Dismantling The Existing Tank Complete All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
31.
Defence #11392755 Technical Bid
Tender for Material And Labour For Plain Cement Concrete 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundation ,Filling And Mass Concrete Complete All As Specified And Directed . , Material And Labour For Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate) As In Cills, Steps; Seismic And Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets And Railings Upto 60 Cm In Height, Copings, Kneelers, Apex Stones, Bed Plates, Kerbs Not Provided For, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating Etc , Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C-1 Using (20Mm Graded Stone Aggregate) As In Bed Blocks For Hold Fast,Coping Errection Of Posts Etc Complete All As Specified And Directed. , Material And Labour Reinforced Cement Concrete Nominal Mix (1:1.5:3) Type A1 (Using 20Mm Graded Stone Aggregate) On Slabs Supported On Walls , Beams And Columns In Floors , Roofs,Landings,Balconies, Canopies Deck Slabs, And In Shelves And The Like Complete All As Specified And As Directed. , Material And Labour Reinforced Cement Concrete Nominal Mix (1:1.5:3) Type A1 (Using 20Mm Graded Stone Aggregate) Chajja, Facia Etc And The Like Complete All As Specified And As Directed. , Material And Labour For Plain Cement Concrete 1:3:6 Type C0 (Using 12.5Mm Graded Stone Aggregate) As In Filling The Hollow Portion Of Steel Frame Complete All As Specified And Directed. , Supply Only Water Proofing Compound. , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cm 1:4 Complete All As Specifed And Directed. , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour For Form Work On Flat Sides To Soffits Of Suspended Roof Slabs Not Exc 200 Mm Thick (Horizontal Or Sloping), Walls , Beams And Columns In Floors,Landings,Balconies, Canopies Deck Slabs, And In Shelves Rough Finished Surface Of Concrete All As Specified And As Directed. , Material And Labour For Form Work On Flat Sides To Chajja, Fins, Louvers, Fascia Etc Rough Finished Surface Of Concrete All As Specified And As Directed. , Refixing Wooden Or Aluminium Door Shutters Of Any Description Exceeding 1 Sqm But Not Exceeding 2 Sqm Each In The Same Opening After Taking Down, Easing And Adjusting Including Refixing Builders Hardware, Glass Etc As Required And Renewal Of Unserviceable Screws Concrete All As Specified And As Directed. , Supply And Fix For 2Nd Class Hardwood Plain, Solid, Straight Chowkhats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue, Pinned At Joints Complete All As Specified And Directed. , Supply And Fix Factory Made 30 Mm Thick Flush Shutter Solid Core Construction With Block Board Core & Plywood Face Panels Commercial Type On Both Sides Incl 5Mm Thick Teakwood Leaping Alround Complete All As Specified And Directed. , Supply And Fix 2Nd Class Hardwood Factory Made Door, 35 Mm Thick, Glazed And Skeleton Shutters, Open Rebated And Prepated To Receive Glass Gauze Etc (With Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Materials And Revated Sash Bars Any Number , Edges Of Framing Plain Chemfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass In Door Etc Or Provided With Styles And Rails As Specified In Ssr Part 1 Section 8, Clause 8.20 (A) Complete All As Specified And Directed. , Supply And Fix 2Nd Class Hardwood Glazed And Skeleton Window Shutter 30Mm Thick, Divided Into Squares, With Plain, Chamfered Or Rounded, Mitred And Rebated Sash Bars, Any Numbers, To Receive Glass, Gauze, Etc Or Provided With Styles And Rails As Specified In Ssr Part 1 Section 8, Clause 8.20 (B) Complete All As Specified And Directed. , Supply And Fix Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed , Supply And Fix Factory Made Solid Panel Pvc Door Shutter 30Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails, M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Heaving A Pvc Sheet Strip Of 20Mm Width Suck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S Frame Wedded/ Sealed To The Stiles, & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Supplying & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed , Supply And Fix Stainless Steel Wire Cloth 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Stapple Etc Concrete All As Specified And As Directed. , Supply And Fix 300Mm Long Aluminium Alloy Anodised , Plate Type ,Stove Enameled Black , With Bright Bolt Not Less Than 12Mm Dia With And Incl Minimum Of 6 Bolts And Nuts ,Four On Bolt Plate And Two On Staple Concrete All As Specified And As Directed. , Supply And Fix Stainless Steel Butt Hinges Cold Rolled Meium Weight Of Size 100Mm Etc Complete All As Specified And Directed. , Supply And Fix Stainless Steel Butt Hinges Cold Rolled Meium Weight Of Size 75Mm Etc Complete All As Specified And Directed. , Supply And Fix Aluminium Alloy Handles 150 Mm Long Fabricated Type Complete All As Specified And Directed. , Supply And Fix Aluminium Alloy Handles 100 Mm Long Fabricated Type Complete All As Specified And Directed. , Supply And Fix Aluminium Anodised Barrel Tower Bolts Of Extruded Section 200 Mm Long Complete All As Specified And Directed. , Supply And Fix Aluminium Anodised Barrel Tower Bolts Of Extruded Section 150 Mm Long Complete All As Specified And Directed. , Supply And Fix 300Mm Long Aluminium Alloy Anodised Sliding Door Bolts , With Hasp Staple (Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast-Aluminium Ally Complete All As Specified And Directed. , Supply And Fix Powder Coated Three Track Aluminium Sliding Window With Approved Make Of Following Extruded Section Of Anodised Glazed Shutter As Per Standard Engineering Practices Including All Other Accessories Complete Including 4.00 Mm Thick Tinted Glass Panes, Rubber Beading, Mosquito Proofing, Locking System Etc. Complete All As Specified And As Directed. (Refer Jindal Cat M-2014 ) Aluminium Sections : A Series (I) Shutter Bottom & Top :- 37.50 X 15 X 1.3 Mm Thick (20690) (Ii) Shutter Interlock :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iii) Shutter Side (Handle) :- 37.50 X 23 X 1.3 Mm Thick (20689) (Iv) Frame Bottom :- 75 X 26 X 1 Mm Thick (20671) (V) Frame Top And Sides :- 75 X 26 X 1 Mm Thick (20672) , Supply And Fix Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) Or Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber/Neoprene Gasket Required (Fittings Shall Be Paid For Separately) With Extruded Built Up Standard Tubular Material And Labour Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling, C.P. Brass/ Stainless Steel Screws All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 125Mmx60mmx1.25Mm With Double Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.Complete All As Specified And Directed. , Supply And Fix Pressed Steel Frames For Doors Of Size 105Mmx60mmx1.25Mm With Single Rebate Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc.,Complete All As Specified And Directed. , Material And Labour For Mild Steel Conforming To Fe 410-0 Or Fe 310-0 In Framed Work Such As Grills, Gratings, Etc With Ends Of Bars Shouldered And/Or Riveted Or Forged Into Spikes; Framed Guard Bars; Ladders; Railings And Similar Work Complete All As Specified And Directed. , Supply And Fix Box Type Steel Windows With Side Hung Shutters Both Mosquito Proof And Glazed Shutter Including Projecting Type Hinges With Steel Handle And Steel Peg Stay With Glazing Bars And 12 Mm Square Bar Or Ground Bar Of Approved Design Welded To Steel Window Frame Dovetailed Or Welded Complete All As Specified And As Directed. , Supply And Fix Steel Ventilators With Top Hung Shutter Including Hinges, Steel Peg Stay, Complete All As Specified And As Directed. , Material And Labour For Mild Steel Tmt Bars 10 Mm Dia And Over Cut To Length, Bent To Shape As Required Including Cranking, Bending And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia As In Reinforcement Bar Complete All As Specified And As Directed. , Repairing Of Existing Mild Steel Rolling Shutter Of Any Description Or Any Size Including Replacement Of Damaged Mild Steel Laths, Repairing/ Replacement Of Side Guide Channels, Pipe Shaft, Springs, Ball Bearings, Locking Arrangements, Welding Work, Alingment And Smooth Operation, Including Necessary Nuts, Bolts, Oiling And Greasing, Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Atmospheric Classification Category 3,Four (4) Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed , Material And Labour For Pre- Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Plain Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Pattern Corresponding To Is 15965 : 2012 Of Durability Class 3, Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Having Yield Strength Of 550 Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified Complete All As Specified And As Directed. Note: To Be Executed For Provision Of Ridges And Hips. , Material And Labour For 12 Mm Thick Prelaminated Particle Board Bwp Type Melamine Finished (Both Side) For Fixing The Panel Of The Partition/Door Including Necessary Fittings, Gusket, Angle Cleats, Screw Etc Complete All As Specified And Directed. , Supply And Fix Suspended False Ceiling Using E-Grid 2430, 180 Gsm (Exposed Ceiling Suspension System ) Of Grid Size 600Mmx600 Mm With Main Runner 32 Mm X 24 Mm And Wall Angle 24Mm X 24Mm Using 4Mm Thick High Pressure Stean Crude Everest Non Asbestos Fiber Cement Plain Board (E-Board Classic) In & Including A Grid Of Gi System Duly Suspended With 4Mm Dia Gi Wire Hanger Fixed With Steel Dash Fasteners Or Iron Purlin From The Roof With Adjustment Clip Providing Positions For Light Fixtures,Air Conditioning Diffuser And Ducts ,Sprinkler ,Smoke Detectors Etc.The Main Runners To Be Secured To Structural Soffits By Hanger @ 1220 Mm Maximum C/C. The Last Hanger At The End Of Each Main Runner Should Not Be Placed At More Than 450Mm From The Adjucent Wall,Flush Fitting 1220 Mm Cross Tee To Be Interlocked Between Main Runners @ 610Mm C/C,So As To Form 600Mm X 600 Mm Grid Complete All As Specified And Directed. , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over And Including Screed Bed Of 15 Mm Thick In Cement Mortar (1:4) Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm Thick, In Floor, Shelves Etc, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Shade Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:4 Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 7 To 8Mm Thick Area Of Each Tile Exceeding 0.18 And N.Exc 0.38 Sqm In Floor, Shelves Etc, Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Shade Of Tiles Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cement Mortar 1:4 Complete All As Specified And Directed. , Material And Labour For Non Skid, Ceramic Coloured Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Exc 0.18 And N.Exc 0.38 Sqm , In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Including 10Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. , Material And Labour For Coloured/ Printed Glazed Ceramic Tiles 7Mm Thick Not Exc 0.15 Sqm In Area In Vertical Surfaces I.E. Dado, Skirting, Etc., Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match The Tiles, Laid Over And Including Screed Or Screed Bed 10Mm Thick In Cement Mortar 1:4, Complete All As Specified And As Directed. , Material And Labour For 75Mm Thick Cement Concrete 1:3:6 Type C-2 (Using 40Mm Graded Stone Aggregate ) As In Plinth Protection Complete All As Specified And Directed. , Material And Labour For 100Mm Thick Cement Concrete 1:2:4 Type B-2 (Using 40Mm Graded Stone Aggregate) As In Flooring, Hardstanding Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For 10Mm Thick Rendering On Other Than Fair Faces Of Brick Wall In Cm 1:6 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement With Using Wpc @3% By The Wt Of Cement. Wpc Shall Be Measured And Paid Seperately. , Material And Labour For 5Mm Thick Rendering On Fair Faces Of Brick Or Concrete Surface In Cm 1:3 Finished Even And Smooth With Out Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Rendering 15Mm Thick External In Cm 1:4 On Fair Faces Of Brick/Concrete Surfaces Finished Even And Smooth Without Using Exta Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surface Of Wall And Applying A Coat Of Alkali Primer And Two Coats Of Acrylic Distemper Complete All As Specified And Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Acrylic Exterior Weather Coat Paint (Weather Proof Paint With Quality Of Dust Guard, Anti Algal And Anti Fungal Paint With Minimum 05 Years Performance Warranty, Over A Coat Of Approved Primer Over 1Mm Thick Water Proof Putty Of Same Manufacturer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Wall Surface And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And Directed. , Material And Labour For Preparing Of Newly Plastered Ceiling Surface And Applying Three Coats Of White Wash Complete All As Specified And Directed. , Material And Labour For 4Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square N-Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For 4Mm Thick Sheet Glass Figured Glass, Pin Head Type And Glazing With Oil Putty In Square N-Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. , Material And Labour For Preparation And Applying Two Coats Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Over A Coat Of Pink Primer Complete All As Specified And Directed. , Material And Labour For Preparation Of Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide On New Steel Surfaces , Over 10 Cm In Width Or Grith Not Other Wise Described Complete All As Specified And Directed. , Supply And Fix Steel Water Tubes, Medium Grade, Isi Marked, Galvanised, 15Mm Bore With All Fittings, Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , Supply And Fix Steel Water Tubes, Medium Grade, Isi Marked, Galvanised, 20 Mm Bore With All Fittings, Fixed To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , Supply And Fix In Repair Vitreous China Wash Hand Basin White, Flat Back Of Size 550Mmx400mm Fixed On And Including Cast Iron Cantilever Bracket, 32Mm Dia Pvc Waste Coupling And 32 Mm Dia Pvc Waste Pipe Including Fixing Of Tap, Waste Fitting Etc Complete All As Specified And Directed. , Supply And Fix In Repair Bib Taps With Wall Flange 15Mm Bore, Fancy Type, Quarter/Half Turn, Brass Chromium Plated, Long Body With Capstan Head And Cup Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Including Accessories Complete All As Specified And Directed. , Supply And Fix In Repair 125 Mm Dia, Chromium Plated Swivel Type Shower Rose With 195 Mm Long Chromium Plated Shower Arm And Wall Flange Suitable For Fixing 15Mm Bore Iron Pipe All As Specified And Directed , Supply And Fix In Repair Bath Wall Mixer With 15Mm Bore (Dia) Spout, Chromium Plated With Long Bend Pipe For Over Head Shower Including Flanges Complete All As Specified And As Directed. , Supply And Fix In Repair Pillar Taps, Cast Copper Alloy, With Capstan Heads, Fancy Type, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered ‘Hot Or ‘Cold With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe 15 Mm Bore Complete All As Specified And Directed. , Supply And Fix In Repair Cp Stop Valve/Angle Valve 15 Mm Bore, Fancy Type Cromimum Plated With Long Shank And Cup (Concealed Type), High Pressure Crutch Or Butter Fly Handle Screwed Both Ends Screwed For Iron Pipe Or For Unions Complete All As Specified And Directed. , Supply And Fix In Repair Rotational Moulded,Multilayer Hdpe Water Storage Tank Of 1000 Ltrs Capacity(Cylindrical Vertical With Closed Top) Isi Marked Fixed In Position On Existing Places With Fittings And Refixing Of Inlet, Outlet & Overflow Pipe Etc, Complete All As Specified And As Directed. , Supply And Fix In Repair Rotational Moulded,Multilayer Hdpe Water Storage Tank Of 500 Ltrs Capacity(Cylindrical Vertical With Closed Top) Isi Marked Fixed In Position On Existing Places Complete And Refixing Of Inlet, Outlet & Overflow Pipe Etc, Complete All As Specified And As Directed. , Supply And Fix Ball Valves 20Mm Bore Dia Of Pipe High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed (Minimum Weight 20Mm-210Gms). , Supply And Fix In Repair 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers , Supply And Fix In Repair Pvc Valve, Symphonic Action Type, Flushing Cistern 10 Liters Capacity Low Level White With Inlet ,Ball Valve ,Float And Handle Including Brocket Complete All As Specified And As Directed. , Supply And Fix 110Mm Dia Pvc (Swr) Pipes, Presure Rate Having 6 Kgf Single Socketed In Any Length With Rubber Ring Joints And Laid In Trenches As In Waste/Soil Pipe Complete All As Specified And As Directed. , Supply And Fix 110Mm Dia Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Complete All As Specified And As Directed. , Supply And Fix 75Mm Dia Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Walls Or Floor Complete All As Specified And As Directed. , Supply And Fix Pvc (Swr) Bends With Access Door Any Radius, 75 Mm Bore Complete. , Supply And Fix Pvc (Swr) Bends With Access Door Any Radius, 110 Mm Bore Complete. , Supply And Fix, In Repair Vitreous China Wash Down Water Closet Of Orissa Pattern Size 580 X 440 Mm White With Integral Foot Rests Including Removing Filled Lean Concrete From Sunken Portion And Putting Of Lean Concrete After Treatment Of Sunken Slab, Connection To Trap And To Flushing Pipe Etc Complete And Making Good To Floor Complete All As Specified And Directed. , Supply And Fix In Repair Vitreous China Wash Down Water Closed Pan (Pedestal Pattern) With P Or S Trap White, Including Connection To Trap And Cistern, Flush Pipe Including White Plastic Water Closet Seat Cover, Closed Pattern With Flat Bottom & Cover And Aluminium Anodised Hinging Device And Making Good Disturbed Surface Of Floor Complete All As Specified And Directed. , Supply And Fix In Repair Plastic Water Closet Seat Cover, White, Closed Pattern With Flat Bottom & Cover And Aluminium Anodised Hinging Device And Fixed Wc Pan Complete All As Specified And Directed. , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Down Door Chowkhat With Shutter Area N-Exc 1.5 Sqm Each(Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Taking Down Chowkhats Or Frames With Shutters Exc 1.5 Sqm But Not Exc 4 Sqm Each (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Taking Down Shutters Of Wooden Or Aluminium Door Of Any Description N. Exc 1 Sqm Each Complete All As Specified And Directed. , Taking Down Shutters Of Wooden Or Aluminium Door Any Description Area Exc 1 Sqm And N Exc 2 Sqm Each Complete All As Specified And Directed. , Dismantling Wall And Ceiling Boards Or Insulation Boards, Any Thickness, Any Description, Including Cover Fillets Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description And In Any Position Not Otherwise Specifically Provided For Complete All As Specified And As Directed. , Taking Down Cement Plaster Of Any Description On Brick Or Stone Walls Etc Including Racking Out Joints Hacking For Key Scrubbing Down With Water Etc Complete All As Specified And Directed. , Demolition Of Brick Work Built In Cement Mortar Or Cement Lime Mortar , Dismantling Structural Steel Work Including Doors, Gates But Excluding Framed Trusses Etc Complete All As Specified. , Demolition Of Stone Slabs And Tiles Laid Dry And Dry Or Pointed Of Any Description Or Thickness Infloors, Aprons Etc. , Dismantling, Floor Hearth Or Wall Tiling Inclduing Cement Mortar Bedding And Removing Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc. 15 Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed. , Demolition And Breaking Up Drain Waste Pipes (Sgsw, Ac Or Rcc, Ci ) Of Internal Dia 75/110 Mm, Set In Cement Mortar In Any Position Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
32.
Defence #11392754 Technical Bid
Tender for Demolition Of Brick Work /Stone Masonry/Pcc Block Masonry Built In Cement Mortar Of Any Description Complete All As Specified And As Directed , Taking Down Cement Plaster Of Any Description Hacking For Key Or Raking Out Joint On Old Brick Work/ Stone /Concrete Surface Etc Complete All As Specified And As Directed , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description & In Any Position Not Specifically Provided For Complete All As Specified And As Directed , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Etc Complete All As Specified And As Directed , Dismantling Of Fencing Posts Or Struts (Wood, Steel Rcc) Any Section, Posts Embeded In Natural Ground Etc, Including Taking Out Embeded Portion And Making Good Distrubed Ground Complete All As Specified And As Directed , Dismantling Of Fencing Wire Mesh, Any Type Etc Complete All As Specified And As Directed , Demolition Of Stone Slab And Tiles Incl Backing Coat Of Any Description Or Thickness In Floors, Aprons Etc (Laid Dry Or Laid Dry And Pointed) Etc Complete All As Specified And As Directed , Demolition Of Cement Concrete And Paving Not Exc 15 Cm Thick (Below Or Above Ground Level) Complete All As Specified And As Directed. , Excavating In Post Holes (Or Similar Holes) Each Not Exceeding 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50M And Making Good Surfaces In Soft/Loose Soil Complete All As Specified And As Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Soft / Loose Etc Complete All As Specified And As Directed , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm. Etc Complete All As Specified And As Directed , Removing Excavated Material Exc. 250 M But N Exc. 500 M And Depositing Where Directed Et Complete All As Specified And As Directed , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Under Bedding For Interlocking Tiles Etc Complete All As Specified And As Directed , Material And Labour For Reinforced Cement Concrete (Nominal Mix) Type (1:2:4) B-1 (With Using 20 Mm Graded Stone Aggregates ) As Columns, Pillars, Piers, Posts, Ftg, Etc Struts Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete 1:4:8 Type D-2(With Using 40 Mm Graded Stone Aggregates) As In Foundations And Mass Concrete Etc Complete All As Specified And As Directed , Material And Labour For Providing Cement Concrete1:2:4 Type B 0 (12.50Mm Graded Stone Aggregate) In Copings, Leveling Concrete, Kerbs, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating Complete All As Specified And As Directed , Material And Labour For Providing 25Mm Thick Precast Cement Concrete Louvres Type B-0 , 1:2:4 (With Using 12.5 Mm Graded Stone Aggregaes) Set In Cm 1:6 As And Jallies, 25Mm Thick (Measured Solid), Including All Mouldings But Excluding Frame (Pre -Cast Frame Shall Be Measured Separately And Paid For Under Item) Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete 1:2:4 Type C-1, (With Using 20 Mm Grades Stone Aggregates) As In Walls Or Retaining Walls, Any Thickness, Size Or Shape Including Pilasters, Buttresses Columns, Pillars, Boundary Pillars And Posts (Including Caps And Base) Incl Form Work Etc Complete All As Specified And As Directed , Material And Labour Brickwork (Old Size Brick) With Sub Class ‘B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:4 Etc Complete All As Specified And As Directed , All As Per Item No 20 Above, But Except Brick, , Material And Labour Brickwork (Old Size Brick)With Sub Class ‘B Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls Built In Cm 1:4 Etc Complete All As Specified And As Directed , All As Per Item No 21 Above, But Except Brick, , Material And Labour For Mirror Polishing 16-18 Mm Thick Granite (Of Any Type) With High Gloss Finish Machine Cut, In Floor Etc Laid Over Cement Screed And Jointed With Grey Cement Slurry And Pointing With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Grinding & Necessary Polishing & Over 15 Mm Thick Screed With 1:6 Cm Complete All As Specified And Directed. , Material And Labour For Formwork With Square / Rectangular Pillars, Posts, Struts, Piers, Columns And, Ftg Etc, Stanchions With Rough Finished Surface Of Concrete Etc Complete All As Specified And As Directed , Material And Labour Tmt Bar 10Mm Dia And Over Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hoping For Columns Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete. , All As Per Item No 25 Above But 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders Etc Complete All As Specified And As Directed , Supply And Fix Framed Work Such As Grills, Gratings, Guard Bars Etc With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railing; Framework Of Water Tanks And Similar Work Conforming To Fe-290 Gde-E-165 Incl Dismantling Of Existing Mild Steel Work Work Etc Complete All As Specified And Directed. , Supply And Fix Posts And Struts As In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Etc Complete All As Specified And As Directed , Supply Only Galvanised Chain Link Fencing Of Mesh Size (75Mmx75mmx3.15Mm) Etc Complete All As Specified And As Dicected , Fixing Only Galvanised Chain Link Fencing Of Mesh Size (75Mmx75mmx3.15Mm)) Size And Any Type Of Standards, Rails, Straining Bolts, Etc. Including Provission Of Binding Wire Etc Complete All As Specified And As Directed , Supply And Fix Pvc Coated Chain Link Fencing, Size Of Mesh 75 Mmx 75 Mm Made Out Of 3.15Mm Dia Gi Wire (Conforming To Relevant Is) Excluding Thickness Of Pvc Coated , Colour As Approved, Fixed To Any Type Of Fencing Pots, Standard Rails, Straining Bolts Etc Complete All As Specified And Directed . , Supply And Fix Mild Steel Screw Bolts (Machine Made) With Hexagonal Or Spuare Heads At One End And Screwed The Other Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Not N.Exc 5 Cm Long And Diameter Of Shank 5 To 10 Mm Complete All As Directed , Material And Labour For Mild Steel Round Bars Fe 410W (Gde.E-250) Quality-A, 10Mm Dia And Over, Cut To Length, Bent To Shap Required Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Les Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed. , Supply And Fix In Repair Galvanised, 2 Strand, Steel Barbed Wire 2.24 Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacings And Straining And Fixing To Any Type Of Standard Rails Straining Bolts, Including, Securing Or Tying At Crossings With And Orovising Of Galvanised Mild Steel Wire, Staples Or Steel Pins, Etc. Complete All As Directed. (Each Line Wire Measured) , Supply And Fix In Repair Razor Blade Galvanised Concertina Coil Of 600Mm Diametre Made Out Of 2.59Mm Thick Galvanised Wire Having Weight Of Each Coil @ 15.2Kg+/-5%, Stretched To A Length Of 10 To 12 M To Achieve 950Mm Dia As In Fencing To Steel Posts And To Another Coil/Ms Ribs Including Fixing With Special Galvanised Fastners Such As J Clips, U Clips C Clips Etc, Fixed In Position Complete All As Specified And As Directed. Note: Linear Measurement(Per Rm Of Concertina Coil Of 600Mm Dia) Shall Be Measured And Paid. , Restraining And Resecuring Existing Barbed Wire Of Any Description Including Making Good Stapples Etc Complete All As Specified And Directed , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 60 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 80 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Supply And Fix Exterior Grade, Coloured Glossy Finish Rubber Pressed, Cement Concrete Designer Chequered Tiles Of Size 30Cm X 30Cm X 25Mm Thick Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment To Match The Shade / Colour / Matrix Of Tiles Over 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Etc Complete All As Specified And As Directed , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Over 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Etc Complete All As Specified And As Directed , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And As Directed , Material And Labour For 75 Mm Thick Cement Concrete Type D- 2, 1:4:8 (40Mm Graded Stone Aggregate) As In Sub Base Of Flooing Etc Complete All As Specified And As Directed , Material And Labour For 100Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20Mm Graded Stone Aggregate )As.In Floor Finishing Even And Smooth With Out Using Extra Cement Complete All As Specified And As Directed , Material And Labour For Rubber Moulded Factory Made Pre-Cast Kerb Stones Of Cement Concrete Type B-1 1:2:4 (With Using 20Mm Graded Stone Aggregates) Fixed In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Et Complete All As Specifed And As Directed. , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Walls And Applying Two Coat Of Cement Base Paint Over A Coat Of Primer Complete All As Specified And As Directed. , Material And Labour For Comple Removal Of Existing Treatment Of Old Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Primeretc Complete All As Specified And As Directed , Material And Labour For Preparation New Of Previously Un Treated Steel And Iron Surface Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Material And Labour For Preparing New Concrete Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Primer Etc Complete All As Specified And As Directed , Material And Labour For Preparing Old Concrete Surface And Applying One Coat Of Synthetic Enamel Paint Etc Complete All As Specified And As Directed
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
34.
Public Administrative Department #11382445 AOC
Tender For Annual Plan-Pro.No 315/26 Crematorium Construction In Avanur Gp 2025-26-Avr 315/26-General Civil Work - Building construction 2 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 5 OD316310/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site . Modified from 60.7.1 6 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 8 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 10 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 11 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 12 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 13 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 14 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III)derived from natural sources: 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 15 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 16 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 17 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 18 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 19 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 20 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 21 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 22 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness(weight not less than 20 kg/sqm) 23 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 24 11.20.2:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement 25 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 26 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap 27 17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid 28 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 29 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 30 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 31 50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall 32 50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall 33 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 34 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 35 17.29:Providing and fixing 100 mm sand cast Iron grating for gully trap. 36 OD325929/2025-2026:Supply and fixing PVC frame and shutter for doors of size of (0.8mX2.00m)including cost of labour and materials as per direction of departmental officers. 37 OD326277/2025-2026:Supplying and fixing Pressed Steel Door of standard pattern with frames as per profile of IS:4351 of section 105*60mm using 18G (1.2mm thick CRCA) sheet and shutters made of section 75*30mm of outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR as per the specification with zinc chromate primer including all charges of fittings, conveyance etc, complete.steel door of size 120*210 cms 38 51.19.ST2:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 2. 15 to below 25 flush capacity 39 OD326287/2025-2026:Ferrow cement soak pit 75 cm dia and 75 cm height 40 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 41 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 42 10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover 43 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 44 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 45 OD326395/2025-2026:supplying and fixing 150mm half cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and materials , conveyance, labour charges etc. 46 OD330008/2025-2026:Roofing with Premium Aluzinc roofing powder coated Tiled design sheet with matte finishing 0.5mm thick or nearest available thickness with overlaps of 150mm at ends and G I hook or screw or crank C I bolts and nuts including plain and bitumen washers etc completed.
Contract Date: Jun 27, 2026 Contract Value : 30.93 Lakh
Government Departments No of Bidders 3
35.
Health and Family Welfare #11375574 AOC
Repairs To Central Medicine Store Building At Nizamabad In Nizamabad District-33.97 Dismantling, Clearing Away And Carefully Stacking Useful Materials For Re-Use And Disposal Of Unserviceable Materials With 100M Lead As Directed By Executive Engineer Duly Taking Actual Premeasurements Before Dismantling Including All Labour Charges , Etc., Complete. Unreinforced Cement Concrete Up To 15Cm Thickness 120.00 Kadapa Slabs Or Shahabad Stone Slabs On Sand Bed 9.00 Earth Work Excavation For Foundations ( Mechanical Means ) For Buildings In Ordinary Soils And Depositing On Bank For All Lifts And With An Initial Lead Of 10M And Up To 3M Depth Including All Operational, Incidental, Labour Charges Such As Shoring, Sheeting, Planking, Strutting Etc., Complete For Finished Item Of Work Excluding Dewatering Charges Etc., As Per Ss 20 B ( Apss 308 ) . 21.12 Plain Cement Concrete ( 1:5:10 ) ( Cement: Fine Aggregate: Coarse Aggregate ) For Foundations And Under Flooring Bed Using Coarse Aggregate 40Mm Size Hard , Machine Crushed Granite From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand, Coarse Aggregate, Water Etc. To Site, Sales & Other Taxes On All Materials And Including All Charges For Machine Mixing, Laying Concrete In Foundations And Under Flooring Bed, Ramming In 15 Cm Layers Finishing Top Surface To The Required Level Curing Etc., Complete For Finished Item Of Work. ( Apss No. 402 ) . 1.35 Supply And Placing Of The Design Mix Concrete M 25 Grade Corresponding To Is 456 With Minimum Cement Content Of 380 Kgs Per 1 Cum Of Concrete Using Concrete Batching Plant With 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate - As Per Is 383 - 1970 And Is 2386 Part 1 To Part 8 ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Fine Aggregate ( Sand ) Coarse Aggregate, Water Etc., To Site And Sales & Other Taxes On All Materials, Centering Using Steel Scaffolding Pipes, Jack Props, Wallers, Foot Plates, Brackets, Steel Centering Plates Etc., Including All Operational, Incidental And Labour Charges Such As Weigh Batching, Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work ( Apss No. 402 ) . Gate Footings 0.43 Pedstals 1.82 Gate Columns 2.93 Masonry Work In Cm ( 1:6 ) Prop ( Cement : Screened Sand ) In Superstructure With Fly Ash Cement / Lime Solid Blocks Of Size 290Mm X 225Mm X 140Mm From Approved Source Having Minimum Crushing Strength Of 50 Kg / Sqcm. Including Cost And Conveyance Of All Materials Like Cement, Sand, Bricks, Water Etc., To Site, Including Sales & Other Taxes On All Materials And Such As Labour Charges, Like Mixing Cement Mortar, Scaffolding Charges, Constructing Masonry, Lift Charges, Curing, Etc., Complete For Finished Item Of Work. ( Apss No. 501 & 504 ) . 0.50 Providing Thermo Mechanically Treated ( Tmt ) ( Fe -500 / 500D / 550D From Primary Producer Tata, Sail, Vsp, Jsw &Shyam Steel Etc As Per Is 1786-2008 ) Of Different Diameters For Rcc Works , Including Labour Charges For Straightening, Cutting, Bending To Required Sizes And Shapes, Placing In Position With Cover Blocks Of Approved Materials And Size And Tying And Lap-Splicing With Binding Wire Of 18 Swg, Forming Grills For Reinforcement Work As Per Approved Designs And Drawings, Including Cost And Conveyance Of Steel Bars, Including All Wastages Such As Overlaps, Couplings, Chairs, Spacer Bars Including Cost And Conveyance Of Binding Wire, Cover Blocks And All Incidental, Operational, Labour Charges Such As Cutting, Bending, Placing In Position, Tying Including Sales And Other Taxes On All Materials Etc. , Complete For Finished Item Of Work. ( Apss No.126 ) . 339.53 Flooring With 16 To 18Mm Thick High Polished Granite Stone Slabs Other Than Black And Regular Colours ( I.E. Of Shades Like Paradiso / Bala Flower / Copper Silk / Laka Red / Lavender Blue ) With Borders And Design As Per The Pattern Approved By The Engineer-In-Charge Of Length Not Less Than 2.43 Mts Set Over Base Coat Of Cement Mortar ( 1:8 ) , 20Mm Thick Using Screened Sand Over Cc Bed Already Laid Or Rcc Roof Slab Including Neat Grey Cement Slurry Of Honey Like Consistency Spread @ 3.3 Kg Per Sqm And Jointed Neatly With White Cement Paste Mixed With Pigment Of Matching Shade To Full Depth Including Cost And Conveyance Of All Materials Like Cement , Sand , Water , Granite Slabs Etc., To Work Site And All Operational, Incidental Labour & Lift Charges, Polishing Charges And All Other Taxes On All Materials, Cost Of Base Coat Complete For Finished Item Of Work ( S.S.701 & Special ) Ground Floor 120.00 Supply Of Precast Concrete Blocks For Paving Of M-35Grade And Thickness Not Less Than 60 Mm For Very Heavy Traffic Areas Conforming To Is 15658:2006 In All Shapes And Designs Of Any Shade As Approved By Engineer-In-Charge Set Over Base Coat Of Cement Mortar ( 1:6 ) , 12 Mm Thick Using Screened Sand Over Cc Bed Alredy Laid Or Rcc Roof Slab Including Neat Cement Slurry Of Honey Like Consistency Spread @ 3.3 Kgs Per Sqm And Jointed With Neat White Cement To Full Depth Mixed With Pigment Of Matching Shade Including Cost And Conveyance Of All Materials Like Cement, Sand, Water And Tiles Etc., Complete For Finished Item Of Work. Ground Floor 33.75 Supply And Fixing Ornamental Ms Main Gate Of Size 9Mts X 3.75 Mts ( Average Height ) I.E., Varying From 3Mts To 4.50 Mts At Centre As Per The Approved Drawing Using Ms Angle Of 75Mm X 75Mm X 6Mm Alround For Frame And 63Mm X 6Mm Ms Flats In 6 Rows Horizontally, 25Mm Ms Square Bars At 125Mm C / C And Ci Spikes 9 Long On Top And 6 Long Ci Spikes In The Middle In Two Rows Including 6 Nos Of Pin Clamps Fixed In Rcc Columns, 2 Nos Of Ms Aldrops 450 Mm Long ( Special ) Welded At The The Centre On Each Side, 2 Nos Of Ms Tower Bolts 450Mm Long ( Special ) And Providing Brass Emblem On Emboseed Cover In The Centre Of The Two Leaves And Fixing 2 Nos. Of Rollers Per Each Leaf Including Cost And Conveyance Of All Materials, Fabrication Charges , Welding Charges, Incidental Charges And All Labour Charges, Etc., Complete For Finsihed Item Of Work. 30.00 Supply And Laying Of Isi 25Mm Outer Dia Medium Grade, With Is:9537 Part 3 Rigid Pvc Concealed In Wall With All Required Pvc / Metallic Junction Boxes Including Masonary Work And Labour Charges Etc., Makes:- Sudhakar / Finolex / Modi / Vip / Precision / Universal / Million Plast / Gold / Polycab / Dec. 5.00 Wiring With Run Of 2 Of 1.5 Sqmm Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specification For Copper Cable. In Existing Pvc Conduit Pipe Including Supply And Fixing Of Jumbo Ceiling Rose And 6A / 10A Isi Mark 1Way Modular Switch With Required Modular Box And Cover Frame In Existing Surface Or Concealed Pipe Wiring Including Cost And Conveyance Of All Material And All Labour Charges Etc., Complete For Light, Fan, Exhaust Fan And Bell Points In N.R.B. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) . / Dec ( Hffr ) . Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 10A 3 / 2 Pin 2 Module Modular Socket With Shutter With 6 / 10A 1 Way 1 Module Modular Switch, 3 Module Box With Cover Frame In Common Switch Board Including Cost And Conveyance Of All Materials And All Labour Charges Etc., Complete In N.R.B. / R.B. Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 6 / 10A 1 Way 1 Module Modular Switches - 2 Nos And 10A 3 / 2 Pin 2 Module Modular Socket With Shutter - 2 Nos Modular Type With Cover Plate And Gi Switch Box Fixing On Separate Board Including All Labour Charges Etc., Complete. Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 16A / 6A 2 Module Combi Socket Modular Socket With Shutter With 16A / 20A 1 Way 1 Module Modular Switch Fixed On Suitable Size Modular Box With Required Cover Frame Including With Connections, Cost And Conveyance Of All Material And All Labour Charges Etc., Complete Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 50.00 Supply And Run Of 3 Of 2.5 Sq.Mm ( Phase, Neutral And Earth ) Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specifications For Copper Cable Of In Existing Pipe. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) / Dec ( Hffr ) . 50.00 Supply And Run Of 3 Of 4.0 Sq Mm ( Phase Neutral And Earth ) Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specifications For Copper Cable Of In Existing Pipe For Power Points And Ac Sockets Inlcuding All Labour Charges Etc., Complete. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) / Dec ( Hffr ) . 10.00 Supply, Transportation And Fixing Of 22W + / 10% , > / 2300 Lumens, 1200Mm Length Led Light Housing Made With Alluminium Anodised Body, Wide Operating Voltage With Pf≥0.9, Surge Protection: > 2Kv, Thd<10%, With Inbuilt Driver And Frosted Cover Cct: 3000K - 6500K As Desired By The Department As Per Is, Minimum Cri≥80 Etc., Complete With 5 Years Warranty With Bis Certification With Bis Certification Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 2.00 Supply, Transportation And Fixing 32-36W ( >=3240 Lumens ) Edge Lit, 2 X2 ( 600Mm X 600Mm ) Slim Panel Recessed / Surface Led Luminaire Square Housing Made Of Aluminum Alloy With Corrosion Resistant Powder Coat, With High Efficiency Acrylic Wide Diffuser, With Wide Operating Voltage Range, Power Factor > 0.9, Surge Protection >2Kv, System Efficacy Of >90 Lumens / Watt, Cct: 3000K - 6500K As Desired By The Department, Cri >80, And Thd Is Less Than 15% With Non Integrated Driver Etc., Complete With 2 Years Warranty With Bis Certification. Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 5 Supply, Transportation And Fixing Of 18 W + / -10% ( >= 1800 Lumens ) Back Lit Led Down Light Recessed / Surface Mounting Round / Square With Housing Made Of Powder Coated Pressure Die Cast Aluminium Housing With Extended Heat Sink, With Protruded High Efficiency Diffuser, Ip20, With Wide Operating Voltage Range, Power Factor > 0.9, Surge Protection: > 2Kv, System Efficacy Of >100 Lumens / Watt, Cct: 3000K - 6500K As Desired By The Department And As Per Is, Cri >80, And Thd Is Less Than 15% Etc., Complete With 5 Years Warranty With Bis Certification. Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 171 Supply, Transportation And Fixing Isi Mark Batten Holder / Slanting Holder Makes : Anchor / Gold Medal Olive / Million Zoom In Lieu Of Ceiling Rose Of Light Point Complete With All Connections And All Labour Charges With 5W Led Lamp. Led Lamp Makes: Phillips / Osram / Crompton / Eveready / Bajaj / Havells / Halonix / Jaquar / C&S / Gm / Gold Medal / Million / Syska. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 3 Supply, Transportation Of Energy Efficient Decorative Fan, 1200 Mm Sweep, Aluminium Body, Consuming 28 W, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current ( Bldc ) Motor, Class Of Insulation: B, 3 Nos Blades, 30 Cm Long Down Rod, 2 Nos Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Greater Than 0.90, Service Value ( Cmm / W ) Greater Than 8.5, Air Delivery Minimum 235 Cmm, 350 Rpm ( Tolerance As Per Is:374-2019 ) , Thd Less Than 10%, Remote Or Compatible To Electronic Step Type Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise = 75 Degree C ( Max ) , Insulation Resistance More Than 2 Mega Ohm, Suitable For 230V, 50 Hz, Single Phase Ac Supply, Earthing Etc., Complete. Makes : Atomberg ( Efficio + ) / Havells / Orient / Rr / Halonix Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 3 Supply And Fixing Of Modular Type Stepped Electronic Regulator For Sweep Ac Ceiling Fans Of 1200Mm / 1400Mm Complete With Connections. Makes : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Crabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T Englaze. 3 Labour Charges For Fixing Of Ceiling Fan Including Giving Connections With Twin Core Wire Etc., Complete. 2 Supply, Transportation Of 12 ( 300Mm ) Isi, 900 Rpm Heavy Duty Exhaust Fan With Metallic Blades Wiremesh With All Accessories Etc Complete. Makes : Crompton / Almounard / Havells Turbo Force. 3 Supply, Transportation And Installation Of Split Ac Unit With High Wall Mounted 100% Copper Indoor Unit And Outdoor Condencing Unit Hermetically Sealed Compressor Suitable For Operation On 230V, 50Hz, 1Phase Ac Supply Capable Of Performing Cooling Dehumidifying Air Circulating And Filtering With Cooling And Condensing Units With 3.0 Mts Of Copper Piping, Insulation Kit And 4 Mts Of 3 Core Copper Flexible Chord ( Voltage Range 160- 264 Volts ) And Cordless Remote Control With 5 Years Warranty Compressor And Comprehensive Maintenance For 2 Years. 1.5 Tr 3 Star Capable Of Delivering 18000 Btu / Hr Makes: Carrier / Daikin / Blue Star / Hitachi. 3 Supply And Erecting Fully Automatic Line Voltage Stabilizer For Operation On Input Voltage 200 To 250V. Rated For 4 Kva Maximum Load And Time Delay Model With Volt Meter, Selector Switch, 6A / 16A Flush Type, 5 Pin Socket For Out Put And With 3 Core Flexible Chord And 3 Pin 6 / 16A Plug Top Suitable For Refrigerator For Continuous Operation Including Cost And Conveyance Of All Mateials And All Labour Charges Etc., Complete. Makes : V-Guard / Real Guard / Uni Stab / Itl.
Contract Date: Ref. Documents Contract Value : 19.36 Lakh
Government Departments No of Bidders 1
Contract Date: Ref. Documents Contract Value : 4.96 Lakh
Government Departments No of Bidders 1
37.
Public Administrative Department #11367710 AOC
Tender for Dismentelling Of Existing Plaster Including Disposal Of Difuse As Directed By Engineer Etc All Comp , M-150 Class Brick Work In 1:4 Cement Mortor With Cement & C-Sand Of 1.25 Fineless Moduius Mortar In Foundation And Plinth Including Etc All Comp , 12 Mm Cement Plaster Single Coat Or Half Brick Wall For Interior Plasting Up To Flor Two Level Including Internal Rounded Angles Etc All Comp , providing and laying Of 8 To 10 Mm Thick Ivory Or Light Shade Vitried Tiles Fllooring Over 20 Mm (Av) Thick Base Of Cement Mortar 1:3 ( 1 Cement:3 Coarse) Laid Etc Al Comp , Providing And Applying White Cement Based Putty Of Average Thikness Of 1 Mm Of Approved Branmd And Anufaturer Over The Plasterd Wall Including Etc All Comp , Finishing Wall With Water Profing Cement Paint In Two Coat Approved Make And Quality On New Work With Two Coat To Give And Even Shade Including Etc All Comp , Fixing And Supplying Of Uropian Type White Galzed Earthen Ware 1 St Quality I.S.I Wc Pan Size 580 Mm Indian Make Of Approved Etc All Comp , providing and laying Of 15 Mm Dia B-Class G.I., Pipe Jindal Jctm With Gi Fitting And Clamp Including Of All Material Etc All Comp , Supply/Fixing Of P.V.C. Heavy Quality P Trap Etc All Comp , providing and Fixing Of C.P. Piller Cock With Brass Sprindle With Isis Mark Quality Etc All Comp , Supply/Fixing Of M.S Bracket For Sink And Hand Wash Basin Etc All Comp , providing and Fixing Of P.V.C. Connection With Approved Quality Etc All Comp , Supply/Fixing Of Khunti Type 5 Point Cloth Hanger Of Approved Quality Etc All Comp , providing and Fixing Of S.W. Gully Trap 150X100 Mm Dia Of Approved Quality Etc All Comp , Brass Stop Cock 15 Mm Dia 200 Grm Heavy Quality Etc All Comp , providing and Fixing Of 15 Mm Dia Angle Valve Of Heavy Quality Etc All Comp , Providing % Finxing Ms Staninless Grade 304 For Railing Etc All Comp , Supply/Fixing Of Fresh Air Fan With 1.5 Sq Nn Fr Pvc Insulated Copper Conducter Cablein 25 Mm Dia Heavy Duty Etc All Comp , Supply And Fitting Of Butten Holder Including Al Comp , Supply/Fixing Of 13 Watt Led Lighting Of Approved Quality Etc All Comp , providing and Fixing Of Hand Wash Basin 550X400 Mm Size Of White Glazed Earthen Wear (22;;X16) With Waste Jali Of Approved Quality Etc All Comp , Providing And Fixing Factory Made Pvc Door Etc All Comp , Supply Of White China Glazed Low Level Cistern;S 10 Lt Capacity With All Internal Fitting Of P.V.C Etc All completion , Supply And Fixing 5 Mm Thick China White Glazed Wall Tiles (Av) 20Mm Thick Base Of Cement Mortor 1:3 ( 1Cement:3 Coarse) Laid And Jointed With White Cement Etc , Providing And Laying In Cement Concrete 4:2:1 Of Not Less Than Strength Of M 150 ( Stone Ballast 4 20 Mm Nominalsize:2 Approved Coarse Sand:1 Cement) Etc All Comp , Supply/Fixing Of Flat Back Or Anguler Front Lipper Urinal Basin Of White Glazed Earthen Ware 465X355x265 Mm For Proper Completion Etc All Comp , providing and Fixing Of Mirror Of Atul Make With Indian Polish Of 600X450 Mm Dia Size With Beveled Edge With Backl Hard Boared Etc All Comp , Add 18% Gst
Contract Date: Jun 25, 2026 Contract Value : 2.39 Lakh
Government Departments No of Bidders 1
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
40.
Petroleum and Natural Gas #11346768 AOC
Bids Are invited for Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (A-1) 4 core 4 Sq. mm , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (a) 3 core 2.5Sq. Mm , Laying of XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (G) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 25 Sq. mm , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (D) 3 core 10 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (a) 2 to 4 core 2.5/ 4 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (A)3 core 2.5 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 4 core 25 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (c) 3 core 10 Sq. mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A)4Sq.mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 2.5 Sq.mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 25 Sq.mm. , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm , Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground. , Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground. , Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cm. layer of sand above & below cable (16 bricks per meter) , Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 50 K.A. and above at 415 V having Normal current rating 400A with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing [ ICS=100% of ICU only, Cat III] , Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. , Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , Disconnecting the cable connection and Providing straight joint with PVC mould using heat shrink /cast resin type epoxy compound Insulating material and making the joint complete using necessary in line connectors, hardener, earth continuity connection, spacers etc. and reconnecting the same & ensure the joint resistance within the limits as per IS. (B)3.5C 50 Sq. mm cable. , Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge.(5) 300 X 50 X 2.0 mm Thick , Providing and fixing approved make 90° Elbow for Perforated C type cable tray. Made from sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. (5) 300 X 50 X 2.0 mm Thick 90° Elbow , Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge. (2) 100 X 50 X 1.6 mm Thick , Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete. , Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with necessary curing for pole muffing or any other purpose.
Contract Date: Ref. Documents Contract Value : 9.58 Lakh
Boards / Undertakings / PSU No of Bidders 4
41.
Defence #11344413 Technical Bid
Tender for Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Hard/Dense Soil, Complete All As Specified And Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil Complete All As Specified And Directed. , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Complete All As Specified And Directed. , Excavating In Post Holes Each N Exc 0.5 Cum Getting Out, Returning Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceedings 25Cm Watering And Removing Surplus Soil To Distance N Exc 50 M And Making Good Surface In Hard/Dense Soils Complete All As Specified And Directed. , Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point, Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc 15Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Timber Scantling 40 Sqcm And Over In Section In Any Position Framed Work, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Unframed Work In Fillets, Rails, Posts, Rafters, Purlins Etc Under 40Sqcm In Section, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Boarding Any Description, Fixed With Any Position With Nails, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness Including Nanital Pattern Or Similar Pattern Roof Covering, Complete All As Specified And Directed By Engr-In-Charge. , M&L For Hardcore Of Gauge N Exc. 63 Mm Of Broken Stone Or Boulders, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface, Complete All As Specified And Directed. , M&L For Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Foundation And Filling Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Plain Cement Concrete Type C2, 1:3:6 (40Mm Graded Aggregate) (M-10) As In Foundation , Filling And Mass Concrete And Similar Work , All As Specified And Directed. , M&L Foer Plain Cement Concrete Type B2, 1:2:4 (40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete, Complete All As Specified And Directed. , M&L For Type C1, 1:3:6 (20Mm Graded Aggregate) Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Setting In Mortar, Complete Complete All As Specified And Directed. , M&L For Type B1, 1:2:4 (20Mm Graded Aggregate) Pre-Cast Cement Concrete With Hollow Block Masonry, Exc. 10 Cm In Width And Setting In Cm 1:6, Complete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Flat Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Sup- Ports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Square, Rectangula Or Polygonal Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And Directed By Engr-In-Charge. , M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4.00 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Wall/Ceiling Panelling And Similar Work Complete All As Specified And Directed By Engr-In-Charge. , S&F Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cemtn And Fixing At Sit Eon Pvc Frame As Per Specifications And Drawing, Complete All As Specified And Directed By Engr-In-Charge. , S&F 5Mm Thnick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 125Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Work As Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Complete All As Specified And Directed By Engr-In-Charge. , S&F Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts, If Required Hooks (Stay), Heavy, For Large Gates; Hook And Pintle Hinges: Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps; Hold Fasts; Wall Ties; Hooks For Hanging Fans; Plain Angle Cleats For Securing Purlins To Wood Trusses Or Rafters; Knee Piece Inserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165, Complete All As Specified And Directed. , S&F Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Rolled Mild Steel Plate Girder Or Single Stanchions Built Up Of One Beam Or Channel Section With Flange Plates, Caps, Bases, Splices, Angle Brackets, Cleats And Other Connections Conforming To Fe-290Complete All As Specified And Directed. , S&F For S&F Steel Work In Tubular Trusses Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161 1979 Grade St.-240, Complete All As Specified And Directed. , S&F 0.63Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap,Fixed With Coach Screws And Washers In Roof, Walls Etc With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F 0.80Mm Thick Plain, Galvanised, Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings (Length And Girth As Fixed) With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. , M&L For 6Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work (05 No Of Ply), Complete All As Specified And Directed By Engr-In-Charge. , M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Plain Cement Concrete 1:3:6 Type C2 (40Mm Graded Aggregate) As In Plinth Protection Complete All As Specified And Directed. , M&L For 75Mm Thick Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Sub Base Or Flooring Complete All As Specified And Directed By Engr-In-Charge. , M&L For 100Mm Thick Cement Concrete Type D2, 1:4:8 (40Mm Stone Aggregate) As In Floors Or Sub Base, Complete All As Specified And Directed. , M&L For 25Mm Thick Plain Cement Concrete Type B1 1:2:4 (20Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For 40Mm Thick Plain Cement Concrete Type B-0, 1:2:4 (12.5Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Tiles In Vertical Surface 350X 250X 7Mm/ 450X 350X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick(Square/Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Virified Ceramic Tiles 10 Mm Thick, Light Shade (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 As Backing Coat Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete Complete All As Specified And Directed. , M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. , Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc.Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Alkali Resistance Priming Paint Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Obd Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. , M&L For Preparation Of Old Wooden Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Steel Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Steel Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide, Zinc Crome Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Of Electrical Switch Board Of Any Size/Tube Light/Ceiling Rose/Holder And Refixing After And Over Wall Panelling Complete All As Specified And Directed. , M/L For Point Wiring In Casing Caping With 1.5Sq Mm Frls Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Casing Caping With Its Accessories Pressed Steel Terminal Box Incl 3Mm Thick Isi Marked Laminated Sheet Cover For Fixing Switches/Socket/Regulators Etc For The Following: - One Light/Fan Point Controlled By One No Piano Type Switch 5 Amps Single Pole One Way , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On The Same Board. , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On Independent Board. , All As Per Item No 1 Above But One 3 Pin Socket Out Let 15/16 Amps With Three Nos Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase, Neutral & Earth Continuity Conductor. , S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. , S&F Switch Socket Combination 2 In 1, 3 Pin, 6 And 16 annual periodical maintenance Flush Type Universal , S&F Switch Socket Combination 2 In 1, 6A Flush Type , S&F Ceiling Rose Surface Bakelite 65Mmx50mm 10 Watt Three Terminal. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 8 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , S&F Mcb Spn 32 Amps 240 Volts C Series, 10 Ka, 50 Hz. Make:- As Approved Make Of Db , S&F Mcb Sp 5 To 32 Amps 240 Volts C Series, 10 Ka, 50 Hz Including Connection In The Db And Testing/Commissioning. Make:- As Approved Make Of Db , Supply And Fixing Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. , Supply And Fixing Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete. , Supply And Fixing Led Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 16 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 4 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , S&F Dwc Pipe 63/50Mm Size All As Specified And Directed By Engr-In-Charge. , Material And Labour For Earthing Complete With Galvanized Steel Earth Plate Electrode 600 X 600 X 6 Mm Thick Buried Directly In Ground( Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level) With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level, Connected To Galvanised Earth Lead Wire 4.0Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron Or Steel, All As Shown In Electrical Plate No 3 Of Ssr Pt I Including Necessary Excavation And Earth Work Plain Cement Concrete (1:3:6) Type C-1 With 50 Mm Thick Pre Cast Reinforced Cement Concrete ( 1:2:4) Type B-1 Cover Slab Framed With 50X30x4 Mm Ms Angle (Reinforced With 6 Mm Dia Deformed Bar @ 15 Cm C/C Both Ways And Suitable Handle Of 10 Mm Dia Round Bar) Including Providing Charcoal Or Coke And Magnesium Sulphate In Alternate Layers Of 15 Cm Compacted Thickness All Around The Earth Electrode, With Funnel And 20 Mm Bore Galvanized Iron Watering Pipe (Medium Grade) Wire Mesh, Copper Lugs, Complete In All Respect., Gi Earth Wire Protected By 40 Mm Bore (Light Grade) Galvanized Iron Pipe And Other End Connected To The Earth Bar (Test Point) Made Of Ms Flat (400X32x6 Mm) Bend In ‘D Shape And Fixed To Wall By Means Of Fast Nut Or Bolt Grouted In To Wall At 1 Mtr From Plinth Height. 4Sqmm Pvc Insulated (Colour Green) Copper Conductor Single Run As Earth Continuity Conductor Along With 15 Mm Pvc Conduit Grouted In Wall Or Fixed On Wall Surface To Be Continued Up To Main Switch Board And Fix With Common Earth Dolly As Directed By Eic . Disposal Of Soil To A Distance Not Exceeding 50 Mtr And Necessary Testing On Completion Complete Including Taking Out Old Unserviceable Earthing Materials All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
42.
Public Administrative Department #11341195 Price Bid
Tender For Supply Of Construction Material And Providing Equipments In Nrega /Vb G Ram G And Other Scheme At Gram Panchayat Ramsarpanchayat Samiti Ramsar For Fy2026-27Up To 31 March 2027\ A Cement B Iron Materials C Cc Blocks D Other Construction Materials E Electrical And Sanitary Items F Other Equipment, Etc. Supply Of Construction Material-1 Gravel / Pebbles / Coarse Aggregate 2 Mud Mortar / Fine Mortar Mix 3 Kiln-Burnt Lime For Lime Masonry Work 4 Cement 4.1 Ppc (Portland Pozzolana Cement) 4.2 White Cement 5 Fine Aggregate 5.1 Sand / Grit 5.2 Local Grit / Gravel 5.3 Fly Ash 5.4 Surkhi (Pulverized Brick Dust) 5.5 Stone Dust (For Masonry Work) 6 Stone / Brick Aggregate (For Works Other Than Roads) 6.1 40Mm Stone Aggregate (Hand-Broken) (Deduct 1/11 For Voids) 6.2 40Mm Stone Aggregate (Crusher-Broken) (Deduct 1/11 For Voids) 6.3 20Mm Stone Aggregate (Crusher-Broken) : 6.4 12/10/6Mm Stone Aggregate (Crusher-Broken) 6.5 Brick Aggregate 7 Materials For Road Works (Including 5 Km Lead) 7.1 63-40 Mm Crusher-Broken Stone Aggregate (Deduct 1/11 For Voids) 7.2 63-40 Mm Hand-Broken Stone Aggregate (Deduct 1/11 For Voids) 7.3 90-45 Mm Hand-Broken Stone Aggregate (Deduct 1/11 For Voids) 7.4 Quarry Rubble (Deduct 1/6 For Voids) 7.5 Gravel (Voids Deducted 1/6) 7.6 Coarse Aggregate (Voids Deducted 1/6) 7.7 Binding Material (Pi 4-6) (Voids Deducted 1/6) 8 Bricks (22.5 X 11 X 7.50 Cm) 8.1 First Class 8.2 Second Class 9 Soling / Paving / Masonry Stone 9.1 Rubble Masonry (Rr) 9.2 Coursed Rubble Masonry (Cr) 9.3 Paving Soling (For Flooring Work Up To 15 Cm Thickness) 9.4 Paving Soling (For Road Paving Work Up To 23 Cm Thickness) 9.5 Jodhpur-Type Stone Slabs / Arches / Fragments (Length 2-3 Ft Width 10-12 In Thickness 2.5-3.5 In) 9.6 10 Flaky Stone Chips (Flaky Material) (3-4 Thick Length And Width 1-2) Sandstone (Dpc Sill Coping Lintel Tand Almirah Etc.) 10.1 Up To 25Mm Thickness 10.2 25Mm To 40Mm Thickness 10.3 40Mm To 50Mm Thickness 10.4 50Mm To 75Mm Thickness 10.5 75Mm To 100Mm Thickness 10.6 100Mm To 150Mm Thickness 11 Flooring / Slab-Laying Stone Slabs 11.1 Flooring Slabs: Up To 35Mm Thick Min. Area Of ​​3 Sq. Ft. Or More 11.2 Slabs For Roofing/Laying: 60-75Mm Thick Min. Area Of ​​3 Sq. Ft. Or More 11.3 Rough Kota Stone (Unpolished) 11.3.1 Up To 900 Sq. Cm 11.3.2 From 901 To 2300 Sq. Cm 11.3.3 Greater Than 2300 Sq. Cm 11.4 Polished Kota Stone (Polished On One Side) 11.4.1 Up To 900 Sq. Cm 11.4.2 From 901 To 2300 Sq. Cm 11.4.3 Greater Than 2300 Sq. Cm 11.5 Marble Stone (Makrana Adanga 20Mm Thick) 11.5.1 From 901 To 2300 Sq. Cm 11.5.2 Up To 900 Sq Cm 11.5.3 Exceeding 2300 Sq Cm 11.6 Marble Chips 11.7 Marble Powder 11.8 Marble Stone (Rajnagar Ii Quality / Local 20Mm Thick) 11.8.1 From 901 To 2300 Sq Cm 11.8.2 Up To 900 Sq Cm 11.8.3 Exceeding 2300 Sq Cm 12 Stone Door Frames 12.1 Single Rebate Size 100 X 75 Mm 12.2 Double Rebate Size 125 X 75 Mm 13 Stone Slabs 13.1 Up To 1.5 M Length Minimum 40Mm Thick 13.2 1.5 M To 2.40 M Length Minimum 50Mm Thick 13.3 2.4 M To 3.0 M Length Minimum 65Mm Thick 13.4 Above 3.0 M Length Minimum 75Mm Thick 14 Precast Tiles / Blocks 14.1 Glazed Size 30 X 45 Cm 14.2 Mosaic Size 40Mm Thick 14.3 Vitrified Size 60 X 60 Cm 15 Interlocking Tiles / Bricks / Blocks For Road Work 15.1 Cement Interlocking Block M-30 Grade 60Mm Thick 15.2 Cement Interlocking Block M-30 Grade 80Mm Thick 15.3 Cement Interlocking Block M-30 Grade 100Mm Thick 16 Fr Pvc Insulated Copper Conductor Single Core Cable (Isi Marked) 16.1 1.50 Sq. Mm 16.2 2.50 Sq. Mm 16.3 0.50 Sq. Mm 16.4 1.00 Sq. Mm 16.5 4.00 Sq. Mm 16.6 6.00 Sq. Mm 17 Local Timber (Including Fittings) (For Doors Windows And Furniture) 17.1 Mango 17.2 Acacia (Babool) 17.3 Others 17.4 Factory-Made Doors (30 Mm Thick Solid Core Single Leaf) 18 Structural Steel 18.1 Iron (Tor Steel Fe 415/500 For Reinforcement) 18.2 Binding Wire (18 Gauge) 18.3 Iron Girders 18.4 Angle Iron / Square Bar / Flat Strip / Angle Iron+ 18.5 Barbed Iron Wire (Size: 12 Gauge Wire And 12 Gauge Strand / 12 Gauge Wire And 14 Gauge Strand / 14 Gauge) 19 Wire Mesh 19.1 Iron Wire Mesh (24 Gauge 14 Mesh) 19.2 Cement Concrete Mesh (Reinforcement) — 40 Mm Thick 20 Glass 20.1 3 Mm Thick Glass 21 Paints & Finishes 21.1 Enamel Paint 21.2 Distemper (Water-Bound) 21.3 Lime — For Whitewashing (Aras / Kali) 21.4 Primer (For Iron / Wood) 22 Petroleum Products 22.1 Diesel (Hsd) 22.2 Mobil Oil 1 22.3 Bitumen Shalitex Board (25 Mm Thick) 23 Plain Sheets 23.1 G.I. Sheet — 22 Gauge (0.80 Mm) 23.2 G.I. Sheet — 24 Gauge (0.63 Mm) 23.3 M.S. Sheet — 22 Gauge (0.80 Mm) 23.4 M.S. Sheet 24 Gauge (0.63 Mm) 24 Corrugated Sheets 24.1 G.I. Sheet (Mm Thick) 24.2 G.I. Sheet 22 Gauge (0.80 Mm) 24.3 Asbestos Cement Sheet 6 Mm (2.5/2.75 X 1 M) 25 Other Sheets 25.1 S.W. Chahar Modi (Plain) 25.2 S.W. Bend (183X90) 26 26.1 G.I. 15 Mm (B Class) 26.2 20 Mm (B Class) 26.3 25 Mm Diameter (B Class) 26.4 A.C. 75 Mm Diameter 26.5 A.C. 100 Mm Diameter 26.6 S.W. 90 Mm 26.7 S.W. 110 Mm (With Fittings) 26.8 Pvc 140 Mm (With Fittings) 26.9 Ppr 110 Mm (2.5 Kg/Sq. Cm) Including Fittings 27 Sanitary 27.1 Indian W.C. 27.2 Orissa W.C. 27.3 European W.C. [Materials For The Above Items] 27.4 Foot Rest 27.5 Ceramic Urinal (430X350X300 Mm) [With] Brackets Waste Pipe 27.6 Wash Basin (450X300 Mm) [With] Brackets Waste Pipe 27.7 S.W. Pipe (100 Mm Diameter 0.6 M Long) 27.8 C.P. Pillar Cock (15 Mm Dia) (Is Mark) 27.9 C.P. Bib Cock (15 Mm Dia) (Is Mark) 27.1 125 Mm Diameter C.P. Grating 28 R.C.C. Np3 Hume Pipe (Spigot & Socket) 28.1 1200Mm Diameter 28.2 1000Mm Diameter 28.3 750Mm Diameter 28.4 600Mm 28.5 450Mm Diameter 28.6 300Mm 29 Steel Conduit (Isi Marked) 29.1 20 Mm Diameter 29.2 25 Mm Diameter 30 Charcoal 31 Pvc Water Tank (Conforming To Is:12701-1989) 32 13/0.20 Mm Stranded Pvc-Insulated Flexible Copper Cable 33 Steel Flat (6 Mm X 75 Mm) 34 Pvc Conduit (Isi Marked) 34.1 25 Mm Diameter 34.2 20 Mm Diameter 35 Junction Box 35.1 20 Mm (Deep) 35.2 20 Mm (Shallow) 35.3 25 Mm (Deep)
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
43.
Public Administrative Department #11336982 Technical Bid
Tender for Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Excavation In Foundation In Ordinary Soil, Loam, Clay Or Sand Including Lift Upto 1.5M & Lead Upto 30M Including Filling Watering & Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building & Inside The Foundation Trenches Or Into The Plinth, Removal & Disposal Of Surplus Earth As Directed By The Engineer In Charge Upto A Distance Of 30M From The Foundation Trenches. (Excluding Royalty ) As Per Sino. 251 , Granular Sub-Base With Well Graded Material Providing, Laying And Spreading Material(Mix In Place) On A Prepared Sub Grade With Rotavator And Compacting With The Road Roller At Omc To Achieve The Desired Unconfined Compressive Strength And To Form A Layer Of Sub-Base.400.1 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 With 22.4 - 53 Mm Stone Ballast As Per Technical Specification Clause 405) , Concrete With 4Cm Gauge Brick Ballast, Fine Sand Of 1.25 Fineness Modulous And Cement In Proportion Of 12:6:1 In Foundation And Under Floor Including Supply Of All Material , Labour, And T&P Etc. Required For Proper Completion Of Work. As Per Sino. 273 , First Class Brick Work In 1:4 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Material, Labour, T&P Etc. Required For Proper Completion Of Work.As Per Sino. 305 , Cement Concrete With 2Cm (3/4) Gauge Approved Stone Ballast, Approved Coarse Sand And Cement In The Proportion Of 4:2:1 Including Supply Of All Materials Labour And T & P Etc Required For Proper Completion Of The Work As Item No. 279(I) , Providing And Laying Of Factory Made 80 Mm Thick Interlocking Cement Concrete Tiles (30 Mpa) Including 25Mm Thick Compacted Bed Of Fine Sand Compacting And Proper Embedding/ Laying Of Interlocking Tiles Leveling And Dressing Of Surface To Required Level And Slope, Filling Joints With Fine Sand Including The Cost Of Material, Labour T&P Etc. Required For Proper Completion Of Work As Directed By Engineer-In Charge.As Per New Item No.1 , Supply Of 350Mm Dia Reinforced Cement Concrete Hume Pipe Np3 Class With Coller Si No Non Schedule Item No 5(Iv) , Laying And Fixing Of 350Mm Dia Reinforced Cement Concrete Hume Pipe Np3 Class (Labour Only) Si No Non Schedule Item No 5A(Iv) , Cement Concrete With 4Cm Gauge Approved Stone Ballast Approved Coarse Sand And Cement In The Proportion Of 8;4:1 Including Supply Of All Material, Labour And T&P Etc.Required For Proper Completion Of The Work As Per Si.No.281 , Struck Pointing With Cement Mortar Consisting Of One Part Cement And 2 Part Of Fine Sand Of 1.25 F.M On Brick Work Including Of All Material Labour And T&P Etc.Required For Proper Completion Of The Work As Per Si.No 574 , Supply Of Reinforced Cement Concrete Hume Pipe Np3 Class.Non Schedule Item No 5(I) , Laying And Fixing Of Reinforced Cement Concrete Hume Pipe Np3 Class.Non Schedule Item No 5A(I) , Supply & Fixing Of Informatory M.S. Sign. Board Size 1200X900mm Made Of 18 Gauge M.S. Sheet Fixed In Isa 40X40x5 Mm. Frame By Flat Iron 40X5mm. On All Four Sides Along With Two Vertical Post Of 2150Mm. Long From Bottom To Frame Of Angle Iron 40X40x5 Mm. With 150Mm. Horizontal Hold Fast At Bottom Braced With 40X5mm. Flat Iron 1980Mm. Long Electrically Welded And Painted With One Coat Of Redoxide Primer.Rates Sanction Se/Red Rs. 4200.00 Including Letter Writting.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
44.
Public Administrative Department #11336972 Technical Bid
Tender for Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Tech , Excavation In Foundation In Ordinary Soil, Loam, Clay Or Sand Including Lift Upto 1.5M & Lead Upto 30M Including Filling Watering & Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building & Inside The Foundation Trenches Or Into The Plinth, Removal & Disposal Of Surplus Earth As Directed By The Engineer In Charge Upto A Distance Of 30M From The Foundation Trenches. (Excluding Royalty ) As Per Sino. 251 , Granular Sub-Base With Well Graded Material Providing, Laying And Spreading Material(Mix In Place) On A Prepared Sub Grade With Rotavator And Compacting With The Road Roller At Omc To Achieve The Desired Unconfined Compressive Strength And To Form A Layer Of Sub-Base.400.1 , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 With 22.4 - 53 Mm Stone Ballast As Per Technical Specification Clause 405) , Concrete With 4Cm Gauge Brick Ballast, Fine Sand Of 1.25 Fineness Modulous And Cement In Proportion Of 12:6:1 In Foundation And Under Floor Including Supply Of All Material , Labour, And T&P Etc. Required For Proper Completion Of Work. As Per Sino. 273 , First Class Brick Work In 1:4 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Material, Labour, T&P Etc. Required For Proper Completion Of Work.As Per Sino. 305 , Cement Concrete With 2Cm (3/4) Gauge Approved Stone Ballast, Approved Coarse Sand And Cement In The Proportion Of 4:2:1 Including Supply Of All Materials Labour And T & P Etc Required For Proper Completion Of The Work As Item No. 279(I) , Providing And Laying Of Factory Made 80 Mm Thick Interlocking Cement Concrete Tiles (30 Mpa) Including 25Mm Thick Compacted Bed Of Fine Sand Compacting And Proper Embedding/ Laying Of Interlocking Tiles Leveling And Dressing Of Surface To Required Level And Slope, Filling Joints With Fine Sand Including The Cost Of Material, Labour T&P Etc. Required For Proper Completion Of Work As Directed By Engineer-In Charge.As Per New Item No.1 , 12Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement And 4 Parts Of Coarse Sand Of 2.25 Fm On Brick Work Including Supply Of All Material, Labour, T&P Etc. Required For Proper Completion Of Work. (Pwd Si No. 584I ) , Supply Of 350Mm Dia Reinforced Cement Concrete Hume Pipe Np3 Class With Coller Si No Non Schedule Item No 5(Iv) , Laying And Fixing Of 350Mm Dia Reinforced Cement Concrete Hume Pipe Np3 Class (Labour Only) Si No Non Schedule Item No 5A(Iv) , Supply And Fixing Of 75Mm Dia Pvc Pipe Si No 730 C , Cement Concrete With 4Cm Gauge Approved Stone Ballast Approved Coarse Sand And Cement In The Proportion Of 8;4:1 Including Supply Of All Material, Labour And T&P Etc.Required For Proper Completion Of The Work As Per Si.No.281 , Supply & Fixing Of Informatory M.S. Sign. Board Size 1200X900mm Made Of 18 Gauge M.S. Sheet Fixed In Isa 40X40x5 Mm. Frame By Flat Iron 40X5mm. On All Four Sides Along With Two Vertical Post Of 2150Mm. Long From Bottom To Frame Of Angle Iron 40X40x5 Mm. With 150Mm. Horizontal Hold Fast At Bottom Braced With 40X5mm. Flat Iron 1980Mm. Long Electrically Welded And Painted With One Coat Of Redoxide Primer.Rates Sanction Se/Red Rs. 4200.00 Including Letter Writting.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
45.
Public Administrative Department #11336970 Technical Bid
Tender for Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000M As Per Technical Specification Clause 301.5 , Excavation In Foundation In Ordinary Soil, Loame, Clay Or Sand Inculuding Lift Upto 1.5 M & Lead Upto 30M Including Filling Watering & Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building & The Sides Of Foundation Trenches Or In To The Plinth Removal & Disposal Of Surplus Earth As Directed By The Engineer In Charge Upto A Distance Of 30Mfrom The Foundation Trenches. Si. No. 251. , Concrete With The 4 Cm Guage Brick Ballast,Fine Local Sand Of 1.25 F.M And Cement In Proportion Of 12:6:1 In Foundation And Under Floor Including Supply Of All Material And T&P Etc. Required For Proper Completion Of The Work As P.W.D S.I. No 273 , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness Hand Packing Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber Applying And Brooming Stone Screening / Binding Material To Fill Up The Interstics Of Coarse Aggregate, Watering And Compacting To The Required Dencity . Grading - Ii ( With 45-63 Mm Size Stone Ballast) As Per Technical Specification Clause 405. , First Class Brick Work In 1:4 Cement And Coarse Sand Morter In Foundation & Plinth Inculding Supply Of All Materials Labour T & P Etc.Required For Proper Completion Of Work. As Per S.I. No. 305. , Cement Concrete With 20 Mm. Gauge Approved Stone Grit ; Approved Coarse Sand And Cement In The Proportion Of 4:2:1 Inculding Supply Of All Material, Labour And T & P Etc. Required For Proper Completion The Work. As Per S.I. No. 279(I) , Providing And Laying Of Factory Made 80 Mm Thick Interlocking Cement Concrete Tiles (30Mpa) Including 25Mm Thick Compacted Bed Of Fine Sand Compacting And Proper Embedding/ Laying Of Interlocking Tiles Leveling And Dressing Of Surface To Required Level And Slope, Filling Joints With Fine Sand Including The Cost Of Material, Labour T&P Etc.Required For Proper Completion Of Work As Directed By Engineer-In-Charge , Supply & Fixing Of Informatory Sign Board Rates Sanction Se/Red
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
46.
Public Administrative Department #11336968 Technical Bid
Tender for Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000M As Per Technical Specification Clause 301.5 , Excavation In Foundation In Ordinary Soil, Loame, Clay Or Sand Inculuding Lift Upto 1.5 M & Lead Upto 30M Including Filling Watering & Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building & The Sides Of Foundation Trenches Or In To The Plinth Removal & Disposal Of Surplus Earth As Directed By The Engineer In Charge Upto A Distance Of 30Mfrom The Foundation Trenches. Si. No. 251. , Concrete With The 4 Cm Guage Brick Ballast,Fine Local Sand Of 1.25 F.M And Cement In Proportion Of 12:6:1 In Foundation And Under Floor Including Supply Of All Material And T&P Etc. Required For Proper Completion Of The Work As P.W.D S.I. No 273 , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness Hand Packing Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber Applying And Brooming Stone Screening / Binding Material To Fill Up The Interstics Of Coarse Aggregate, Watering And Compacting To The Required Dencity . Grading - Ii ( With 45-63 Mm Size Stone Ballast) As Per Technical Specification Clause 405. , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness Hand Packing Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber Applying And Brooming Stone Screening / Binding Material To Fill Up The Interstics Of Coarse Aggregate, Watering And Compacting To The Required Dencity . Grading - Iii ( With 22.40-53 Mm Size Stone Ballast) As Per Technical Specification Clause 405. , Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means As Per Technical Specification Clause 502 , Providing And Applying Tack Coat With Bitumen Emulsion(Rs-1) Using Emulsion Distributor @ 0.275 Kg. Per Sqm. On The Prepared Granuler Surface Treated With Priner & Cleaned With Hydaulic Broom As Per Technical Specification Clause 503. , Providing,Laying And Rolling Of Open Graded P.C. Of 20Mm Thickness Composed Of 13.2Mm To 5.6Mm Aggregates Eigher Using Penetration Grade Bitumen Or Emulsion To Required Line Grade And Level To Serve As Wearing Course On A Previously Prepared Base I/C Mixing In A Suitable Plant, Laying And Rolling With A Three Wheeld 80-100 Kn Static Roller Capacity, Finished To Required Level And Gredes To Be Followed By Seal Coat As Per Technical Specification Clause 508 , Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type C As Per Technical Specification Clause 510 , Brick Edging On Both Side Of The Road Of First Class Bricks 8Cm Wide And 12Cm Deep Laid ..........Comp..As Per S.I.No.765 , First Class Brick Work In 1:4 Cement And Coarse Sand Morter In Foundation & Plinth Inculding Supply Of All Materials Labour T & P Etc.Required For Proper Completion Of Work. As Per S.I. No. 305. , Cement Concrete With 20 Mm. Gauge Approved Stone Grit ; Approved Coarse Sand And Cement In The Proportion Of 4:2:1 Inculding Supply Of All Material, Labour And T & P Etc. Required For Proper Completion The Work. As Per S.I. No. 279(I) , Providing And Laying Of Factory Made 80 Mm Thick Interlocking Cement Concrete Tiles (30Mpa) Including 25Mm Thick Compacted Bed Of Fine Sand Compacting And Proper Embedding/ Laying Of Interlocking Tiles Leveling And Dressing Of Surface To Required Level And Slope, Filling Joints With Fine Sand Including The Cost Of Material, Labour T&P Etc.Required For Proper Completion Of Work As Directed By Engineer-In-Charge , Supply Of Reinforced Cement Concrete Hume Pipe Np-3 Class (Including Cartage Up To Site) 300 Mm Of Dia As Per Ch.20 Non Schedule Item No.5 (Iv) , Laying & Fixing Of Reinforced Cement Concrete Hume Pipe Np-3 Class 300 Mm Of Dia As Per Ch.20 Non Schedule Item No.5 (A) (Iv) , Supply & Fixing Of Informatory Sign Board Rates Sanction Se/Red
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
47.
Public Administrative Department #11336959 Technical Bid
Tender for Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Excavation In Foundation In Ordinary Soil, Loame, Clay Or Sand Inculuding Lift Upto 1.5 M & Lead Upto 30M Including Filling Watering & Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building & The Sides Of Foundation Trenches Or In To The Plinth Removal & Disposal Of Surplus Earth As Directed By The Engineer In Charge Upto A Distance Of 30Mfrom The Foundation Trenches. Si. No. 251. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness Hand Packing Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber Applying And Brooming Stone Screening / Binding Material To Fill Up The Interstics Of Coarse Aggregate, Watering And Compacting To The Required Dencity . Grading - Iii ( With 22.40-53 Mm Size Stone Ballast) As Per Technical Specification Clause 405. , Concrete With 4 Cm. Gauge Brick Ballast, Final Local Sand Of 1.25 Fm And Cement In Proportion Of 12 :6 : 1 In Foundation And Under Floor, Including Supply Of All Material With Mixer Machine, Labour And T & P Etc. Required For Proper Completion The Work.As Per S.I. No. 273 , First Class Brick Work In 1:4 Cement And Coarse Sand Morter In Foundation & Plinth Inculding Supply Of All Materials Labour T & P Etc.Required For Proper Completion Of Work. As Per S.I. No. 305. , 12 M.M. Thick Plaster With Cement Mortar Consisting Of One Part Of Cement And 5 Part Of Coarse Sand Of 2.25 Fm On Brick Work Including Supply Of All Material, Labour, T&P Etc.S.I No 584(I). , Cement Concrete With 20 Mm. Gauge Approved Stone Grit ; Approved Coarse Sand And Cement In The Proportion Of 4:2:1 Inculding Supply Of All Material, Labour And T & P Etc. Required For Proper Completion The Work. As Per S.I. No. 279(I) , Providing And Laying Of Factory Made 80 Mm Thick Interlocking Cement Concrete Tiles (30Mpa) Including 25Mm Thick Compacted Bed Of Fine Sand Compacting And Proper Embedding/ Laying Of Interlocking Tiles Leveling And Dressing Of Surface To Required Level And Slope, Filling Joints With Fine Sand Including The Cost Of Material, Labour T&P Etc.Required For Proper Completion Of Work As Directed By Engineer-In-Charge , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2Cm. Gauge Approved Stone Ballast In The Proportion Of 1:1½:3 In Lintels Of Doors And Windows Excluding Supply Of Reinforcement And Its Binding But Including Its Fixing And Necessary Centering And Shuttering Etc. And Also Inculding Supply Of All Material, Labour And T & P Etc. Required For Proper Completion Of The Work. As Per S.I. No. 283A. , Mild Steel Or Iron Work In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work (When Not Included In An Over All Rates) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of All Steel And Wastage And Over Lapping & Hooks. S.I.No. 504 , Supply/Fixing Of Informatory Sign Board.........I/C Painting,Writing & Fixing At Site.... Complete.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
48.
Public Administrative Department #11336953 Technical Bid
Tender for Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 , Excavation In Foundation In Ordinary Soil, Loame, Clay Or Sand Inculuding Lift Upto 1.5 M & Lead Upto 30M Including Filling Watering & Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building & The Sides Of Foundation Trenches Or In To The Plinth Removal & Disposal Of Surplus Earth As Directed By The Engineer In Charge Upto A Distance Of 30Mfrom The Foundation Trenches. Si. No. 251. , Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401. , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness Hand Packing Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber Applying And Brooming Stone Screening / Binding Material To Fill Up The Interstics Of Coarse Aggregate, Watering And Compacting To The Required Dencity . Grading - Iii ( With 22.40-53 Mm Size Stone Ballast) As Per Technical Specification Clause 405. , Concrete With 4 Cm. Gauge Brick Ballast, Final Local Sand Of 1.25 Fm And Cement In Proportion Of 12 :6 : 1 In Foundation And Under Floor, Including Supply Of All Material With Mixer Machine, Labour And T & P Etc. Required For Proper Completion The Work.As Per S.I. No. 273 , First Class Brick Work In 1:4 Cement And Coarse Sand Morter In Foundation & Plinth Inculding Supply Of All Materials Labour T & P Etc.Required For Proper Completion Of Work. As Per S.I. No. 305. , 12 M.M. Thick Plaster With Cement Mortar Consisting Of One Part Of Cement And 5 Part Of Coarse Sand Of 2.25 Fm On Brick Work Including Supply Of All Material, Labour, T&P Etc.S.I No 584(I). , Cement Concrete With 20 Mm. Gauge Approved Stone Grit ; Approved Coarse Sand And Cement In The Proportion Of 4:2:1 Inculding Supply Of All Material, Labour And T & P Etc. Required For Proper Completion The Work. As Per S.I. No. 279(I) , Providing And Laying Of Factory Made 80 Mm Thick Interlocking Cement Concrete Tiles (30Mpa) Including 25Mm Thick Compacted Bed Of Fine Sand Compacting And Proper Embedding/ Laying Of Interlocking Tiles Leveling And Dressing Of Surface To Required Level And Slope, Filling Joints With Fine Sand Including The Cost Of Material, Labour T&P Etc.Required For Proper Completion Of Work As Directed By Engineer-In-Charge , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2Cm. Gauge Approved Stone Ballast In The Proportion Of 1:1½:3 In Lintels Of Doors And Windows Excluding Supply Of Reinforcement And Its Binding But Including Its Fixing And Necessary Centering And Shuttering Etc. And Also Inculding Supply Of All Material, Labour And T & P Etc. Required For Proper Completion Of The Work. As Per S.I. No. 283A. , Mild Steel Or Iron Work In Plain Work Such As Reinforced Concrete Or Reinforced Brick Work (When Not Included In An Over All Rates) Wrought To Required Shape As Necessary Including Bending For Proper Completion Of The Work And Including Supply Of All Steel And Wastage And Over Lapping & Hooks. S.I.No. 504 , Supply/Fixing Of Informatory Sign Board.........I/C Painting,Writing & Fixing At Site.... Complete.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
49.
Housing Urban and Rular Development #11335412 AOC
Replacement Of Roofing And Misc.Works At Barrack No.13 At Old Hydrabad House , Nagpur (Only For Society) (2Nd Call).- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material uptoa distance of 50m.beyond the building area and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 2 Providing soling using80mm sizetrapmetalin15cm.layerincludingfilling voidswith Crushed sand/grit, ramming, watering etc. complete. 3 Providing and laying Castinsitu/Ready Mix cement concrete inM-10oftrap/granite/ quartzite/gneiss metal for foundation and bedding including bailing outwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishing if required and curing complete,with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 4 Dismantlingbrickmasonryinlimeorcementmortarandstackingthematerilsasdirected with all leads, lifts etc. 5 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials,stacking the same as and where directed in the compound including scaffolding etc. complete. 6 Removing rafters from roof including the materials asdirectedwithallleads ,liftsetc. complete. 7 Removing purlins from roof including stacking as directed with all leads , lifts etc. complete. 8 Providing second class Burnt Brick masonry with conventional/I.S.type bricks in cement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 9 Providing and laying Castinsitu/Ready Mix cement concreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 11 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing,gussetplatesetc.asperdetaileddesignsanddrawingsoras directedincluding cutting,fabricating,hoisting,erectingfixinginposition, Makingriveted/bolted/welded connectionandone coat of anticorrosive paint andover it 2 coats of oil painting approved quality and shade etc. complete. 12 Providing Gas or Electrical welding for structural steel section, plates as per detailed drawing. For less than 10 mm thick section. 13 Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 14 Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( withinorganic pigment). The paint shallhave atotal coating thickness ofnominal 35mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)600 mm girth (Surface Width). 15 Providing internal cement plaster 20mm thick in a single coat using Ready to use wall plasterto concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete.a) cement ratio 1:5 With Prior Approval of Concerned S.E. 16 Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete.a) cement ratio 1:5 With Prior Approval of Concerned S.E. 17 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 18 Providing and laying Vitrified MATT finishhaving decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical andconfirmingtoIS15622-2006(GroupBla)ofapprovedmakeshadeandpatternfor flooringinrequiredpositionlaidonabedofbondingchemicalfillingjointscuringand cleaning etc .complete. 19 Supply & Fixing ofRock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick and required width wide in plain pattern includingCement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. 20 PRIVIDING AND FIXING ANTIMICROBIAL ACOUSTICAL FALSE CEILING: Bioguard Mineral Fibre Acoustical Suspended Ceiling System with 19mm thick Acoustics Microlook 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth bright laminated visual with Humidity Resistance (RH) of 99%, NRC 0.7 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 41db as per ASTM E1414, Light Reflectance ≥87% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of Class 0/1 as per BS 476 Part6/7 and Class A as per ASTM E 84with 19mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm./ 600x1200mm. The scrim on the face of the tile shall be cleanable, washable up to 500 cycle as per ASTM D-4828 and resistant to disinfectants. The tile shall be treated with Anti Microbial coating on the face of the tile to achieve cleanroom classification of class 5 (Class 100) as per ISO 14644-1 and suitable forzone 4 area having partical emission under normal conditions of ISO 5, Decontamination Class of CP10 and Bacteriological Cleanliness Class B1 for specific strains as per NF S 90-35:2003 The tile shall have a rating of 8 or above (face) for tests conducted for Resistance to growth of Mold in accordance to ASTM D3273. It shall be suitable for Green Building application, with Recycled content of 35% having VOC and Formaldehyde emission rate less than 0.1mg/m2/hr. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. 21 Transportation of material obtained from debris of various sorts excavated stuff including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed.( Beyond 10 Km. ) 22 Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction material for which royalty is necessary. Natural Sand 23 Testing Charges for Conducting BASIC TEST OF CEMENT.Standard ConsistancyFineness, Specific Gravity,Setting Time ( Initial & Final ), CompressiveStrength, Soundness etc. complete. 24 Testing Charges for Conducting BASIC TEST OF FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ),Silt & Clay Content 25 Testing Charges for Conducting BASIC TEST OF BRICKS Water Absorption (Set of 5 Bricks), CompressiveStrength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). 26 Testing Charges for Conducting BASIC TEST OfSTEEL BAR TESTING Upto 16 mm(Set of 3 Bars)
Contract Date: Jun 22, 2026 Contract Value : 18.51 Lakh
Government Departments No of Bidders 2
Maharashtra View Result →
50.
Power #11334917 AOC
Tit-bit civil work along with Repair and Maintenance of Chakdha (west) CCC Building. (Estimate as per P.W.D. S.O.R.Vol I &II for the area of Kalyani Sub-Division in the district of Nadia w.e.f. 01.11.17 and all other corrigenda uptodate ) - 1 Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m .a) In ground floor including roof 2 b) In first floor 3 Dismantling all types of masonry excepting cementconcrete plain or reinforced, stacking serviceablematerials at site and removing rubbish as directedwithin a lead of 75 m.a) In ground floor including roof 4 b) In first floor 5 Dismantling all types of plain cement concreteworks, stacking serviceable materials at site andremoving rubbish as directed within a lead of 75m.In ground floor including roof.(a) upto 150 mm. thick 6 b) In first floor 7 Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof 8 b) In first floor 9 Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necess-ary trimming thesides of trenches, levelling, dress-ing and ramming thebottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm 10 Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis ofmeasurement of finished quantity of work)(a) With earth obtained from excavation of foundation 11 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 12 Cutting holes and subsequent mending good damages. (a) Diameter upto 150 mm. (i) In brick work [Cement-4.0 Kg/Mtr] 13 Cutting chase upto 125 x 150 mm. and subsequentmending of damages.(a) in brick wall [Cement-3.6 Kg/Mtr] 14 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineerin charge. 15 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 16 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any as per relevant IS codes. a) Pakur Varietya) In ground floor 17 b) In first floor 18 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominalsize) excluding shuttering and reinforcement,if any, in gound floor as perrelevant IS codesPakur variety 19 1st floor 20 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Varietya) In ground floor 21 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.a) For works in foundation, basement and upto roof of ground floor / upto 4m.(iii) other manufacturers not specified. 22 Brick work with 1st class bricks in cement mortar (1:6)a)in foundation & plinth 23 In Super structure, ground floor 24 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.a) In ground floor 25 b) In first floor 26 Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.(B) Wall-------------------------With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m-----------ii) Other than Coloured decorative including white----------i) Gr.floor 27 A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m& joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m----- Other than Coloured decorative including white-------i) Gr.floor 28 Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to themanufacturer sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be suppliedby the contrr]e)I(I) With application slurry @1.75 kg/ Sq.m, 20 mm sandcement mortar (1:4) & 2 mm thick cement slurry at back sideof tiles, 0.2 kg/ Sq.m white cement for joint filling withpigment.(A) Light colour(Gr.floor) 29 (ii) First floor 30 Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick)----------(i) Ground floor 31 In 1sl floor 32 Labour for taking out door and window frame including shutter for repair orreplacement of different parts of the frame & refixing the same including mendinggood all damaes complete. (Concrete and brick work for mending damage will bepaid separately)(a) Upto area 2.5 Sq.m 33 M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S. W.I. flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.i) Grill weighing above 16 Kg./sqm------------a) In ground floor 34 b) In first floor 35 Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 36 1st floor 37 M.S. structural works in columns, beams etc. with simple rolledstructural members (e.g. joists, angle, channel sections conformingto IS: 226, IS: 808 & SP (6)- 1964 connected to one another withbracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming toIS: 816- 1969 & IS: 1995 using electrodes of approved make andbrand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools andplants and labour required for the work including all incidentalchages such as electricity charges, labour insurance charges etc 38 Supplying, fitting and fixing windows and ventilators with or withoutintegrated grills conforming to IS 1038-1975 and manufacture from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket,handle plate etc, including hoisting in position,straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing fixed with neceessary clamps and nuts and bolts and erected complete.(ii) below 50mm.Fixed type steel windows as per IS sizes with horizontal glazing bars 39 (b) Openable steel windows as per IS sizes with side hung shuttersand horizotal glazing bars. [The extra rate admissible for theopenable portion only] 40 steel peg stay 300 mm long including fitting and fixing. 41 Two point nose steel handle including fitting and fixing. 42 Taking out M.S. or W.I. Grills from wooden frame including cuttinglugs from masonry wall and refitting the same and mending gooddamages after repairs. (Excluding the cost of necessary repair ofdamages) or doing any other necessary works 43 Easing, oiling and adjusting the steel shutters including scraping allmembers and fitting so as to make the shutters easily operable (noextra payment will be made for taking out and fixing glass, ifnecessary). 44 Renewing M.S. members of steel shutters by welding including takingout the old, mending good damages complete, including taking outand refixing the glass panes. 45 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(c) Sal : Locala) In ground floor 46 Panel shutters of door and window, as per design (each panel consisting of singleplank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made)iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 47 Brass floor door stopper. 48 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed. a) With continuous plate base (Hexagonal / Round rod), (i)75 mm grip x 10 mm dia rod. 49 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISImark.vi) 100mm. X 75mm. X 3.5 mm 50 Anodised aluminium barrel / tower / socket bolt (full covered) of approvedmanufactured from extruded section conforming to I.S. 204/74 fitted and fixedwith cadmium plated screws:ix) 300mm long x 10mm dia. bolt. 51 Anodised aluminium Aldrop / Sliding bolts of approved quality manufacturedfrom extruded section conforming to I.S. specification (I.S. 2681/66) fitted andfixed complete.----------300mm x 16mm dia. Bolt 52 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 53 PVC Door Shutter-37 mm thick-Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor. 54 Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).In 10-12 Micron thickness Annodizing film. i)natural White k) Movable door shutter .Door frame (top & sides) 55 ii) Shutter :Top rail 56 Bottom rail 57 Door Vertical 58 Lock rail 59 Glazing cleap 60 Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium sections for the following units:- (B) Partly glazed partly panelled or fully glazed single leaf alunminiumswing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry setneoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. 61 Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987. i) 4mm thick clear glass. 62 5mm thick clear glass 63 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filledwith foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) . (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) 64 Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film. i)natural White j)Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both endsof vertical member restrained but panels within 0.9 sq.m.)Top,bottom & side member 65 Intermediate member. 66 Glazing clip. 67 Supplying heavy duty hydraulic double action floor spring along with toppin/set of pivots conforming to IS: 6315 or any approved make as perdirection of Engineer in charge. 68 Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge. (This item to be provided where floor spring not 69 Supplying concealed type heavy duty PVC headed aluminium tower boltfor double leaf doors as per approved make and brand as per direction ofEngineer-in-Charge.250 long 70 Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.(weatger gasket/woolpile) 71 Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width 72 Extra for each additional floor. 73 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including, rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface including threading nosing and drip course where necessary.i) With 1:6 cement mortar.a) 20 mm thick plaster.in ground floor 74 a.2) In first floor 75 15 mm th.b.1) In ground floor. 76 b.2) In first floor 77 ii) With 1:4 cement mortar.c) 10 mm thick plaster.c.1) In ground floor 78 Neat cement punning about 1.5mm. thick in wall, dado, window sills, floor, drain etc. 79 Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 80 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)i) Standard Quality 81 Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concretesurface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior Immersion paint including scrapping and preparing the surface thoroughly, complete as per manufacturers specification and as per direction of E.I.C(i)One coat in ground floor 82 2) In first floor 83 Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.b) NORMAL Acrylic Emulsionin ground floor(two coat) 84 2) In first floor(Two coat) 85 Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. 86 a ) Priming one coat on timber or plastered or surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 87 b ) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 88 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.(a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) 89 (b) On steel or other metal surface :--------With super gloss (hi-gloss) ------(iv) Two coats (with any shade except white) 90 (iii) One coat (with any shade except white) 91 Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m) 92 (ii) 4 mm thick 93 Renewing worn out putty of glass panes :(a) Panes not exceeding 0.2 Sq.m 94 Supply fitting approved type ventilator in position after cutting holes in walls setting in cement mortar, mending damages to wall and plaster and two costs of point of approved brand and shade.(b) R.C.C ventilator of 20 mm. thicki) Upto 0.10 Sqm. Area 95 Artificial stone in floor, dado, staircase etc with cement concrete(1:2:4) with stone chips, laid in panels as directed with toppingmade with ordinary or white cement In ground floor. (as necessary) and marble3 mm. thick topping (High polishing grinding on this item is notpermitted with ordinary cement).(ii) 25 mm th.(i) Ground floor 96 Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wallafter unscrewing bolts, nuts, screws etc.andstacking the material at site as directed. 97 Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)(i) In Roof:-b) With 0.60 mm thick sheet 98 (ii) In wall:-a) With 0.60 mm thick sheet 99 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 100 (f) 25 mm to 30 mm shuttering without staging in foundation 101 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming toIS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (SpunYarn,Valamoi/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. 102 B) UPVC Fittings:a) Plain Tee(ii) 110 mm. Dia 103 b) Plain Y(ii) 110 mm. Dia 104 c) Bend 87.5 degree (ii) 110 mm. Dia 105 d) Shoe c(ii) 110 mm. Dia. 106 Uprooting and removing plants from the surface of wallsparapet etc and making good damages. (Repairing ofdamages to be paid separately) 107 Renewing throating,nosing or drip course moulding with 15 mm.thick cement plaster (1:4) complete. (Cement 0.7Kg/Mtr.)In ground floor. 108 Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in- Charge prior to execution will be necessary).(Payment to be made on area cleared) 109 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union cross, elbow nipple, long screw reducting socket reducing tee, short piece etc. fitted withholder bats clamps, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground (payment will be made on the center line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials) FOR EXPOSED WORK15MM DIA MEDIUM QUALITY 110 ii) 20 mm dia medium quality 111 ii) 25 mm dia medium quality 112 Chromium plated round shower with revolving joint (Equivalent toCode No. 541(N) & Model - Tropical / Sumthing Special of ESSCO orsimilar brand). 113 Supplying, fitting and fixingpillar cock ofapproved make---CP pillar cock-15mm(Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand) 114 Supplying, fitting, fixing G.M wheel valve of approved brand and made tested to 21 Kg. Per sq. cm. (for water lines only.) --- i)20mm. 115 ii)25mm 116 11)40mm 117 Supplying fitting fixing bib cock Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand). 118 b)i.Chromium plated Stop cock [Equivalent to Code No.513(A) & 513(B) & Model - Tropical/Sumthing of ESSCO or similar brand] 119 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver redas per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm X 300 mm 120 Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. b) With S trap (with vent) 121 Supplying, fitting and fixing towel rail with two brackets.a) C.P. over brass.b) I) 25 mm dia and 450 mm long 122 Supplying, fitting and fixing 18 mm. thick marble partition slab with chawk doongri marble square cut, both sides polished with two front corners rounded and edges polished. 123 Supplying, fitting and fixing white vitreous china best quality approvedmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damages and painting the brackets with two coats ofapproved paint.(i) 450 mm X 300 mm size 124 Supplying, fitting and fixing Orissa pattern water closet in white glazedvitreous chinaware of approved make in position complete excluding P orS trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm each 125 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification withP.V.C fitting complete, C.I. brackets including two coats of painting to bracket etc. 126 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make withnecessary fixing materials and clamps complete.i) Polythene Flush Pipe 127 Flat back urinal (half-stallin urinal)in white vitreous china ware of approved make (CERA/HINDWARE)supplied,fitted and fixed in position with brass screw on75mmx75mmx75mm wooden block complete. (i) 635 mm X 395 mm X 420 mm each 128 Supplying ,fitting and fixing approved brand p.v.c. connector white flexible ,with both ends coupling with heavy brass C.P.nut 15mm dia.(i) 300 mm long 129 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps.900 mm long 130 Approved patent vent cowl I.C.I. conforming to I.S.S.a) 75 mm dia. 131 Supplying PVC water storage tank approved quality with closed top with lid (block). Multilayer. a) 1500 Litre capacity. 132 Labour for dismantling (i) 15 mm 133 (ii) 20 mm 134 100 mm 135 Refixing GI pipe with fittings with cleaning wher necessary(i) 15 mm 136 (ii) 20 mm 137 Removing chokage in G.I pipe including cleaning pipe(i) 15 mm 138 (ii) 20 mm 139 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all damages with cement concrete(4:2:1) with jhama chips and cement plaster (6:1) to match with and curing.15mm 140 (ii) 20 mm 141 Dismantling wash basin with brackets with or without waste fittings. 142 Dismantling E.P. or Anglo-Indian W.C. 143 Dismantling urinal. 144 Dismantling pillar cock of wash basin. 145 Cleaning glazed tiles with acid 146 Mazdoor 147 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately)(a) For Exposed Work PVC Pipes 15mm 148 20 mm metredia 149 25 mm metredia 150 40 mm metredia 151 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 530 mm X 430 mm x 180 mm 152 Supplying, fitting and fixing 15 mm swan neck tap with left & right handoperating nob with aerator (Equivalent to Code No. 510, 510(A) andModel - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand 153 Iron door ring of approved quality fitted and fixed with nut and washer complete. (i) 50mm dia. 154 Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick) 155 ii) Godrej Hydraulic door closer fitted and fixed complete.(c) Light type 156 Filling in foundation or plinth by fine sand inlayers not exceeding 150 mm as directed andconsolidating the same by thorough saturation withwater, ramming complete including the cost of supplyof sand. (payment to be made on measurement offinished quantity) 157 Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(a) Upto 20 users:-(ii) Beyond a lead of 150 metre and outside the Municipal limit 158 Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineerin-Charge. 159 Renewing profile of rolling shutter including fitting fixing complete as per existing size and shape 160 Labour for taking out rolling shutter (only shutter portion) dismantling by parts for repair or (replacement of damaged parts only), rehanging and refitting the same in position after necessary repairs (excluding the cost of supply of new parts 161 Easing and oiling, cleaning collapsible gate and repairing to locking arrangements. 162 Easing and oiling, cleaning rolling shutters excluding repair to inside locks 163 Easing and oiling W.I. Gate or G.I. Gate. 164 Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. 165 Extra for each additional story 166 Labour for lowering plastic water storage tank and stacking in places asdirected.(i) Upto 1500 litre capacity 167 (b) Extra for each additional story 168 Labour for punching hole in plastic water storage tank upto 50 mm dia 169 Labour for taking out (from fencing) line of wire (galvanised,strand or barbed) by drawing the same out through holes in thebody of the post or through holes formed by fixed staples.(Payment to be made on the length of the wire taken out.) 170 ) Supplying, fitting galvanised 3 ply 12 gauge / 4 points line ofbarbed wire in fencing (holes already made in the body of the post)or fixed by staples tightening and fixing the wires in taut conditionwith straining bolts including the cost of cutting and of lappingjoints in the wire as necessary but excluding the cost of galvanisedstaples,straining bolt and binding wire where necessary. 171 Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete. (i) 10 mm. dia. (a) 150 mm 172 Supplying galvanised staples fitted and fixed complete. (a) 19 mm. to 25 mm. size
Contract Date: Jun 23, 2026 Contract Value : 5.85 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
TenderDetail
Loading tenders