View Bid Results For Preparation Of Cold Chain Tenders

We found 566 Bid Results related to preparation of cold chain tenders. You can find Contractor details who won preparation of cold chain tenders along with contract details in Bid awards announcements section.

Filters
Stage
463
68
35
Tender Publishing Platform
8
558
State / UT
35
97
47
44
38
36
35
27
27
19
19
18
18
18
14
14
14
11
10
7
6
6
6
6
5
4
4
3
3
2
2
2
1
1
1
1
Contract Value
106
25
351
83
Publish Date
2
0
0
0
0
Sector
19
380
73
22
18
14
13
12
10
5
4
4
3
2
1
1
1
1
1
1
Ownership
5
385
127
32
21
1
Within keyword
Active filters:
Showing 1–12 of 566 tenders matching your filters
1.
Defence #11478095 Technical Bid
Tender For Provision Of Certain Revenue And Minor Work At Age B/R Ii Under Ge(N) Patiala=- 1 Dismantling, Floor, Hearth Or Wall Tiling Including Cm (Bedding (But Not Backing), Removing Serviceable Tiles To Store & Rubbish Off The Premises Complete All As Specified And Directed 2 M&L For Single Charge, Vitrified, Stain & Scratch Resistant, Premium Quality Coloured Tiles Area Of Each Tiles Exceeding 0.42 Sqm But Not Exceeding 1.00 Sqm, In Floors Etc Mm And 8-10 Mm Thick, In Any Pattern Of Light & Dark Tiles As Approved, Laid Over 15 Mm Thick Screed In Cm (1:6) Epoxy Cartridge Tile Grout Using Filling The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour,Complete All As Specified And Directed. 3 All As Per Item No 2 Above But As In Skirting Over 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 4 M&L For Ceramic Glossy Finish, Joint Free Premium Quality Coloured Tiles 600 X 300 Mm And 8-9 Mm Thick, In Any Pattern Of Light & Dark/Highlighters Tiles Etc As Approved, On Vertical Surfaces Such As In Skirting/Dado Etc, Set And Including 10 Mm Thick Rendering In Cement Mortar (1:4) And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 5 M & L For 15 Mm Thick Artificial Granite (Of Any Type) Work Steps, Jambs, Pillars, Window- Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. Including Screed Bed Or Bedding Layer Of Mortar 20 Mm Thick For Laying Floor Finishes Complete All As Specified. 6 Providing And Laying Premium (1St) Quality Straight Edge, Ceramic Tiles Exterior Grade Scratch Resistance Of Size 300X300X7 To 8 Mm Thick In Floors Etc. In Any Shade And Design/Pattern Of Light & Dark Tiles Etc Set And Including 15 Mm Thick Rendering In Cement Mortar (1:6) And Pointed In White Cement With Pigment To Match Complete All As Specified. 7 Taking Up Or Down Existing Steel Tubing And Connections, 15Mm Bore Complete All As Specified. 8 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 15Mm Bore Incl Fittings Complete All As Specified And Directed. 9 Taking Up Or Down Existing Steel Tubing And Connections, 20Mm Bore Complete All As Specified. 10 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 20Mm Bore Incl Fittings Complete All As Specified And Directed. 11 S&F In Repair Angle Stop Cock With Wall Flange 15Mm Cast Copper Alloy, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No-Fon-40053Pm Or Equivalent In /Hindware/Kohlar. 12 S&F In Repair 15 Mm Bore Bib Cock With Wall Flange, Cast Copper Alloy, Chromium Plated, Fancy Type With Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No Opp-15037Pm Or Equivalent In/Hindware/Kohlar. 13 S&Fin Repair Brass Chromium Plated Basin Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar Cat Part No Orp-10011Bpm Or Equivalent In /Hindware/Kohlar 14 S&F In Repair 15Mm Cp Connection 600Mm Long Including Washer And Brass Nuts All As Specified. 15 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 16 S&F In Repair Counter Top Wash Basin Of Size 600 X465Mm With Wash Basin Cabinet Size 600X455X600Mm Including Bottle Trap , Brass Waste Fitting Complete All As Specified. Make:-Cera/Hindware/Jaguar 17 S&F In Repair Toilet Roll Holder Stainless Steel Flap All As Specified. Make- Jaquar Cat Part No Can-1153S Or Equivalent In /Hindware/Kohlar 18 S&F In Repair Towelrack 600Mm Long With Lower Hanger (Stainless Steel) All As Specified.(Make: Jaquar Cat Part No Acn -1181S Or Equivalent In /Hindware/Kohlar 19 S&F In Repair Soap Dispenser With Glass Bottle (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1135N As Equivalent /Hindware/Kohlar 20 S&F In Repair Soap Dish Holder With Glass (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Akp -35731P Or Equivalent In /Hindware/Kohlar 21 S&Fin Repair Towel Ring Square With Round Flange (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1121N Or Equivalent In /Hindware/Kohlar 22 S&F In Repair Healthfaucet With 1Mtr Long Easy Flex Tube In Chrome Finish And Wall Hook Of 15 Mm Bore With Cp Pipe Complete Set Of Make -Jaquar Cat Part No Ald - 565 Or Equivalent In Parryware/Prayag 23 S&F In Repair Looking Mirror 5Mm Thick Size 3.5X3.5 Feet Incl Stud And Fastners Complete All As Specified And Directed. 24 S&F In Double Arm Wall Mounted Reversible Plain/Magnifying (X3) Pivotal Mirror All As Specified. Jaquar Cat Part No Acn -1193N Or Equivalent In /Hindware/Kohlar 25 S&F In Repair Glass Shelf Corner With Bracket Of Size 225Mm X 225Mm Thickness Of Glass 6Mm) With Cp Brass Railing And Brass Screws.Make- Jaquar Cat Part No Acn -1173 Or Equivalent In /Hindware/Kohlar 26 S&F Grating Doom 125Mm Of Ptmt. 27 S & F In Repair Vitreous China Urinal Half Stall Type White (Excluding Flushing Cistern ) Including Waste Fitting, Waste Pipe Complete All As Specified.Make-Jaquar/Hindware/Kohlar 28 S&F Ms Work In Tubular/Pipe/Angle Sections For Frame Work For Roof, Vertical Poles, Rafters And Purlins Including Washer Etc Complete All As Directed. 29 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. ( Design Of Sheet As Mangalore Tiles Pattern In Red Colour ). 30 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. 31 M & L Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Incl Preparation Of New Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 32 M&L 25Mm Thick Factory Made Coloured Interlocking Designer Polished Floor Tiles (Ultra Pattern) Of Grade M-35 Of Shape And Size As Directed,And 100Mm X 100Mm Size Tiles Piece On Every Joint Of Tiles Flooring Laid Over & Including 20Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And Directed . Note: Sample Shall Be Got Approved From Ge Before Commencement Of Work 33 S&F In Repair Stainless Steel Drapery Rod Of 20 Mm Inner Dia (In Lengths As Directed) Of & Including Decorative Finial At Both Ends And Pair Of S S Steel Brackets Fixed At Both Ends With Pvc Rawl Plug & Steel Screws On Walls/Beam, (Victorian Design)All As Specified & As Directed. Make -Sample Can Be Seen In The Office Of Engg-In-Charge For Checking And Quoting The Same 34 Demolition Of Cement Concrete Un -Reinforced In Ground Floors And Pavings N.Exc 15Cm Thickness Complete All As Specified. 35 M& L For 25Mm Thick Pcc 1:2:4 Type Bo Using 12.5 Mm Graded Stone Aggregate As In Floor Complete As Specified And Directed. 36 S & F 75 Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified. 37 S & F Floor Door Stopper Of Aluminium Alloy And Tongue, Anodised With Hard Drawn Steel Overall Length Of Cover Plate 140Mm.As In Repairs Complete All As Specified. 38 Dismantling Of Wall And Ceiling Board(Fiblre, Pulp, Insulation Etc) Any Thickness Including Cover Fillets Complete All As Specified And As Directed. 39 S & F Powder Coated Aluminum Alloy Interlocking Snap Grid Frame Work For False Ceiling Size 600Mm X 600Mm Consists Of Main Tee Runners Of Size 38Mm X 38Mm X 1.5Mm And Cross Tee Of Size 38Mm X 38Mm X 1.5Mm, Spaced Between The Main Tee At 600Mm Centre To Centre To Form A Grid Of 600Mm X 600Mm Complete All As Specified And As Directed And As Per Manufacturer. Instruction. 40 M & L For 4Mm Thick Non Asbestos Fibre Cement Building Boards Of Make E Board Classic Designer Board (Cascade Or Occenic) Of M/S Everest Industries Ltd Or Equivalent As Approved, By Ge Fixed Or Laid/ Inserted To Timber/Gi/Aluminium Framework With Complete All As Specified And As Directed. 41 Taking Down Cement Mortar Plastering On Brick Or Stone Walls, Etc. Including Raking Out Joints,Hacking For Key,Scrubbing Down With Water, Etc Complete All As Specified And As Directed. 42 M&L For Rendering 15Mm (In Two Layers 10Mm+5Mm) Thick Plaster In Cm (1:4) On Faces Of Brick Work Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 43 M&L For Rendering 5Mm Thick Plaster In Cm (1:3) On Faces Of Brick Work Or Concrete On Surfaces Of Ceiling, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 44 Complete Removal Of Existing Treatment Including Washing Rubbing Down And Stopping Of Painted Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 45 M&L For New Plaster Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 46 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 47 M & L For Cement Concrete As Pcc 1:5:10 Type E-2 Using (40Mm Graded Stone Aggregate) As Foundations,Filling And Mass Concrete Complete All As Specified. 48 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 49 Demolition Of Brick Work Or Stone/Boulder Masonary, Laid In Cement Mortar Or Cement Lime Mortar Complete All As Specified. 50 M&L Brick Work, Straight Or Curved On Plan N.Exc 6M Mean Radius In Cm 1:6 Using Old Size Brick Complete All As Specified. 51 Taking Down Chowkat Or Frame With Shutters (With Out Taking Off Shutter From The Frame ) Not Exceeding 1.5 Sqm Each As Directed By Engineer-In-Charge. 52 S&F For Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door Frames/Chowkhat Comprising Of 100 Mm X 65 Mm Size, Applying Pvc Solvent Cement And Screwed With Full Body Threaded, Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With Mild Steel Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete All As Specified And As Directed By Engr-In-Charge. 53 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Solid Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 54 S&F Stainless Steel (304 Grade) Finished Butt Hinges 125Mm Complete All As Specified And Directed 55 S & F Extruded Brass Handles, Fabricated Type Polished 150 Mm Complete All As Specified. 56 S & F Brass , Barrel Tower Bolts, With Cast Or Sheet Barrel And Rolled Or Cast Bolts And Fixed 200 Mm Complete All As Specified. 57 M&L For 250Mm Long Brass, Sliding Door Bolt Withsand Or Die-Cast Brass Hasp, Staple (Bolt Type) And Fixing Bolt With Rolled Or Drawn Brass Bolts And Fixed Complete All As Specified And As Directed. 58 Dismantling Pvc Pipes With Fittings Upto 75Mm To 110Mm Dia Complete All As Specified And Directed By Engr-In Charge.. 59 S&F For Pvc (Swr) Pipe 110 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 60 S&F For Pvc (Swr) Pipe 75 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 61 S&F For Pvc (Swr) Bends With Access Door 110 Mm Dia Complete All As Specified And As Directed. 62 All As Per Item No 61 Above But 75 Mm Dia. 63 S&F Pvc (Swr) Plain Bend 110 Mm Dia Complete All As Specified And As Directed. 64 S&F Pvc (Swr) Plain Bend 75 Mm Dia Complete All As Specified And As Directed. 65 S&F Pvc (Swr) Branch Piece Single Or Double T Equal Or Unequal With Access Door 110 Mm Dia Complete All As Specified And As Directed. 66 All As Per Item No 65 But 75 Mm Dia. 67 S&F Pvc (Swr) Vent Cowl 110 Mm Dia Complete All As Specified And As Directed. 68 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50 M And Making Good Surface 69 M&L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exc 10 Cm Girth All As Specified. 70 Taking Down Carefully Existing Points Wiring On Surface Conduit/Concealed Conduit Including Conduit From Surface And Expect Conduit In Concealed Wiring For Light/Fan/Socket/Power/Bell From Wall & Roof Along With Fitting And Fixtures Such As Switches, Sockets, Ceiling Roses, Batten Holders, Unserviceable Light Fittings, Pieces Of Wires, Gutties, Conduit, Wooden Boards Etc Removing Materials To Store For Keeping In Safe Custody Of Contractor For Which The Credit Has Been Considered Under Schedule Of Credit And Making Good The Disturbed Portion Of All Floor, Ceiling Etc All As Specified And Directed. 71 M & L For Point Wiring With 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor For One Light/Fan/Bell Point In And Including New Pvc Rigid Non Metallic Concealed Conduit 19/20 Mm Dia, Medium Duty, Isi Marked To Be Terminated In Pressed Steel Terminal Boxes With Pvc Modular Top Cover Plates Of Suitable Size For Mounting Of Modular Type Switches/Sockets/Regulators Including 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Earth Continuity Conductor Controlled By One Switch And/Or One Regulator Complete Including Cutting Chases And Making Good The Surfaces In Cm 1:3 And Finishing The Surface As Per Existing Treatment All As Specified And Directed By Engr-In-Charge.Notes: (I) Cost Of Pressed Steel Terminal Boxes And Modular Top Cover Plate Shall Be Included In Point Wiring. (Ii) Wiring Shall Be Done As Per Colour Code In Is For Phase, Neutral And Earth.(Iii) -Cost Of Eye/Bottle Thimbles Used For Connection In Switches/Sockets & Mcbs In Dbs Shall Deemed To Be Included In The Unit Rate Quoted For This Item. 72 All As Per Sl Item No 71.00 Above Herein Before But One Socket Out Let 5 Pins 5 Amp On The Same Board With Other Switches Complete All As Specified And Directed. 73 All As Per Sl Item No 71.00 Above Herein Before But For One Socket Out Let 5 Pins 5 Amp On Independent Board Complete All As Specified And Directed. 74 All As Per Item No71.00 Herein Before But 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor Incl 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Copper Earth Wire For Switch Socket Combination 3 Pin 15 Amps On Independent Board. 75 S & F In Replacement Of Modular Switch 1 Way, 6 Amps, 1 Module, 230 Volts Complete All As Specified. 76 S & F In Replacement Of Modular Switch 1 Way, 16 Amps, 1 Module, 230 Volts Complete All As Specified. 77 S & F In Replacement Of Modular Socket 5 Pin 6 Amps, 2 Module 230 Volts Complete All As Specified. 78 S & F In Replacement Of Modular Socket 5 Pin 6 &16 Amps, Combination Type 2 Module Complete All As Specified. 79 S & F In Replacement Of Modular Fan Regulator Step Type, 120 Watts, 2 Module Complete Fixed As In Repair All As Specified. 80 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 81 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Green Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 82 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Red Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 83 Supply And Fix Surface/Recess Mounted Led Luminaire 36 Watt Cool White 4000-5000K Suitable For Gridd Celling Cutout Dimensions: 2X2 Ft. Incl Connecting With Twin Core Copper Wire From Ceiling Rose To Fitting, Fixture Size: (Lxwxh) In (595X595X65) Mm Incl Lamp And Driver All As Specified & Directed. 84 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 18/20W 6500K Of Capacity ,20 Watt,4 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 85 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 86 Supply And Fix Mirror Light With Linear & Compact 12 W Mirror Light With Decorative Grey End Caps, Polycarbonate Body And Ribbed Opal Diffuser Of Capacity 9 Watt Complete All As Specified And Directed By Engr-In-Charge. 87 M & L For Sub Main Wiring With Two Single Core 4.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 4 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2 Runs Of 4.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 4.00 Sqm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note2 : Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces, Cutting Not Exc. 10 Cm Girth . (Iii) Taking Out/Down Existing Unserviceable Sub Main Wiring. 88 Taking Down And Refixing Of Ceiling Fan After Supply And Replacement Of Rubber Reel, Round Cover Plate Of Size 6 Inch Of Ceiling Fan Complete With Ms Split Clamp Two Nos, Nuts And Bolts Complete All As Specified And Directed By Engr-In-Charge. 89 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 250 Mm Sweep 900 Rpm Engineering Thermoplastic Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Louver Complete All As Specified And Directed By Engineer-In-Charge. 90 Material And Labour For Making Hole Of Suitable Size For Exhaust Fan 250 Mm/ 300Mm Sweep In Wall For Grouting And Making Good The Surface Complete All As Specified And Directed By Engr-In-Charge. 91 Supply And Fixing Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With Mcb Spn 32 Amps, Complete All As Specified And As Directed By Engineer-In-Charge. 92 S&F Poly Coated Gi Frame Work As In Grid For False Ceiling Comprising Of Protected Gi Perimeter Channel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30Mm And Web Of 27Mm Fixed To Surrounding Wall Using Nylon Sleves And Screws At 450Mm Centre To Centre/Intermediate Chaqnnel 0.9Mm Thick Having To Equal Flanges Of 15Mm Each And Web Of 45 Mm Suspended From Soffit And Approx 900Mm Centre To Centre With Gi Cleat And Steel Expansion Fasterners With And Including Ceiling Section (Not Exc 1.2 Metre Length) Of 0.55Mm Thickness Having Kurled Web Of 50Mm And Flange Of 26Mm Each With Lips Of 10.5Mm Fixed To The Intermediate Channel With Connecting Clips Acorss The Intermediate Channel At 457Mm Centre To Centre And Hangers 6Mm Dia Gi (Upto 1200 Mm Length Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of Gi Flat 40 X3Mm Size 60Mm Long Complete With And Including 7Mm Thick Pvc Laminated Gypsum Tiles Of Size 595X595Mm Complete All As Specified & Directed 93 M&L For Complete Removal Of Existing Surfaces Of Walls Including Cornices, Pillasters Etc, And Applying Two Coats Of Obd Over And Incl A Coat Of Interior Wall Primer Over Wall Care Putty Complete All As Specified And Directed. 94 M&L For Complete Removal Of Existing Treatment On Walls And Applying 02 Coats Of Exterior Weather Emulsion Paint To External Walls/Rcc Surfaces/Soffits Of Chajjas/Roof Projections/Cantilevers/Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer And Over Wall Care Putty Complete All As Specified. 95 S&F Stainless Steel Tubing Of 25 Mm Dia Chromium Plated Min. 1.0 Mm Wall Thickness As In Curtain Rod Complete Incl S&F 02 Nos Stainless Steel Brackets/Finials Fency Type, Stops Fixed With Ss Screws Etc All As Specified & Directed.Note : For The Purpose Of Mesurement And Payment Running Length Of Curtain Rod Only Shall Be Considered. 96 Taking Down Chowkhats Or Frames Of Any Description Exc 1.5 Sqm And N. Exc. 4 Sqm Each (Without Taking Off Shutters From The Frame) Including Cutting Hole To Size For Receive Fresh Pcc Of Hold Fast And Making Good The Disturbed Surface Same Complete All As Specified And Directed. 97 S&F Factory Made Pressed Steel Frames Made Of Ms Sheet Of 1.20 Mm Thickness For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified,Size 125X60Mm 98 M&L Pcc 1:3:6 Type C-0 In 12.5 Mm Graded Stone Aggregates Hold Fast Fillinng Inside Frame & Hold Fasts Etc Complete All As Specified 99 S&F Factory Made Flush Shutters 35Mm Thick Ply Construction, Bwp Confirming To Is 2202, Solid Core Construction, With Block Board Core And Plywood Face Panels Commercial Type On Both Sides With 6Mm Thick Lipping Frame To Match Including Supply And Fixing Following Items :(A) Mild Steel Butt Hinges 125Mm - 3 Nos. Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos. Per Leaf(D) Stainless Steel (804 Grade) Finished Sliding Bolt 250 Mm - 1 No. Per Leaf(E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 100 S&F 35Mm Thick Glazed And Skelton Shutters Of 2Nd Class Hard Wood (Factory Made) Open Rebated And Divided To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shutter As Specified In Ssr-91 Pt-1 Section 8 Clause 8.20(A), Kiln Seasoned And Chemically Pressure Treated All As Specified Including Stainless Steel 304 Grade Wire Cloth (0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm) All As Specified And Including Supply And Fixing Following Items :(A) Stainless Steel (304 Grade) Finished Butt Hinges 125Mm - 3 Nos Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos Per Leaf(D) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16X250Mm - 1 No Per Leaf (E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 101 M&L For Two Coat Of Synthetic Enamel Paint (Finishing Coat) Over One Coat Of Pink Primer To New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Incl Prepration Of Surfaces Complete All As Specified And Directed. 102 S&F 300Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 103 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 104 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X35 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 105 S & F In Replacement Of Surface Mounted Led Bulk Head Luminaire Of Capacity 10 Watt With Abs Body & Polycarbonate Diffuser, Ip54 Inc Connection With ,With Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 106 Supply And Fix Lamp Holder Including Led Bulb 9 W Including Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 107 M & L For Sub Main Wiring With Two Single Core 6.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 6.0 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2(Two) Runs Of 6.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 6.00 Sqmm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note 2 :(I) Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces And Cutting Not Exc. 10 Cm Girth . (Iii) Including Taking Out/Down Existing Unserviceable Sub Main Wiring. 108 S & F In Replacement Of Sheet Metal Enclosure Db Tpn 4 Ways Double Door 415 Volts With 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables Complete With Ip-43 Protection Complete All As Specified And Directed By Engr-In-Charge 109 S & F In Replacement Of Mcb, Triple Pole & Neutral (Tpn) 10 Ka 240 Volts 40 To 63 Amp Capacity Fixing In Db’S Complete All As Specified And Directed. (Note: Mcb Should Be B Or C Curve As Directed By Engineer In Charge) 110 Supply And Fix In Replacement Of Sheet Metal Enclosure 8 Ways Double Door For Dbs When Mcbs Are To Be Used 240,Volts Including 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link All Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables With Ip43 Protection Complete All As Specified & Directed By Engr-In-Charge. 111 S & F In Replacement Of Mcb, Single Pole 240 Volts 6 To 32 Amp Capacity For Fixing In Db’S Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 112 Supply And Fix In Replacement Of Mcb , Spn, 240 Volts ,40-63 Amp For Fixing In Dbs Of Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 113 M & L In Replacement Of Unsv Earthing Complete With Galvanized Iron Earth Plate Electrode Of Size 600X600X6.0Mm , Buried Directly In Ground (Earth Pit Not Less Than 2.25 Mtrs Below Normal Ground Level) With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galvanized Earth Lead Wire 4.0 Mm Dia By Means Of Bolts , Nuts , Check Nuts And Galvanized Iron Or Steel Including Earth Work In Any Type Of Soil, Charcoal Salt 15 Cm Around The Earth Plate 20 Mm Dia Watering Pipe Medium Grade 1.70 Mtr Long With A Plug At Top, Gi Protection Pipe Light Grade 15 Mm Dia From Earth Pit To Main Board Including Pcc Pit In Cement Concrete 1:2:4 Along With Ci Frame And Cover 10Mm Thick Duly Hinged To Ci Frame As Shown In The Electrical Plate No3 Of Ssr 2009 Part 1 Specification At Page 497. 114 Xlpe Insulated ,Screened, Pvc Bedded, Galvanized Steel Wire Armoured, Electric Power Cables (Heavy Duty) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 25 Sq Mm 4 Core Supplied & Laid In Replacement Complete All As Specified& Directed By Engineer-In-Charge. 115 Excavation In Trenches Not Exceeding 1.5 Mtr Wide And Not Exceeding 1.5 Mtr In Depth For Laying Of Cables Including Getting Out In Any Kind Of Soil Complete All As Specified And Directed. 116 Returning Filling In Including Spreading, Levelling, And Well Ramming, In Layers Not Exceeding 25 Cm Each Layer Of Any Kind Of Soil. 117 Removing Surplus Excavated Material From Site Not Exceeding 50 Mtrs From Starting Point And Depositing Where Directed At Level Not Exceeding 1.5 Mtr Above The Starting Point. 118 Material And Labour For Sand Cushioning For Cables 8 Cm Below The Cable And 15 Cm Above With Dry River Sand In Trenches For Cushioning Of Underground Cable Line Including Spreading, Leveling, Well Ramming Completed All As Specified And Directed. 119 Cutting Of Hardstanding Floor/Wall For Laying Of Cable Including Matching With Suface By Using Cement Concrete All As Specified And Directed. 120 Supplying & Laying Factory Made Unreinforced Precast Concrete Cable Covers Class Lv Type 1, Flat, Size 250X150X40Mm Laid In Trenches As Protection To Cables Complete All As Directed By Engr-In-Charge 121 Material And Labour For Replacement Of Gi Tubing Light Grade 40 Mm Bore For Passing Through Cables Under The Floor ,Along The Wall Or Along The Pole Complete All As Specified And Directed. 122 Dismantling Of Stone Slab And Tiles Laid Bedded And Pointed In Any Mortar Description Or Thickness In Floors, Apron Etc Complete All As Specified. 123 M & L For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Complete All As Specified. 124 M&L For Virified Ceramic Light Shade Tiles 8 - 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc,Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Epoxy Cartridge Tile Grout Using Fill The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour. 125 All As Per Item No 124 But As A Skirting Incl. 10Mm Thick Rendering As In Back Coat Complete All As Specified. 126 M&L For 7 To 8 Mm Ant-Skid Ceramic Joint Free Premium Quality Coloured Tiles Area Of Each Tile Esc 0.06 Spm But Next 0.11Sqm, As In Floors Etc. In Any Pattern Ghe & Dark Tiles As Approved, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, In Floors Etc. Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 127 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Laid Over Cement Screed Base 15Mm Thick In Cm 1:6 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 128 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations All As Specified. 129 Dismantling Water Tanks And Removing To Store Of Capacity Exc 500 & Not Exc 1000 Ltrs Complete All As Specified. 130 Supply And And Fixing, Hoisting Pvc Tank Of 1000 Ltr Capacity Including Supplied And Fixed 20Mm Dia Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed.(Minimum Weight 15Mm-142 Gms/20Mm-210Gms/25Mm-455 Gms/40Mm-690 Gms Float Valve Assembly Complete All As Specified And Directed. 131 S&F In Repair Wall Mixture Mixing Valves Incl. Three Joints To Steel Pipes Or Unions 15 Mm Bore Fancy Type Best Quality As Per Sample Approved By Ge Make-Jaquar Cat Part No Qqp-7217Pm Or Equivalent In Hindware/Kohlar. 132 S&F Pvc Cabinet 600X450Mm Overall Size With Looking Mirror Of Selected Qality Glass Mountedover Pvc Framing As Per Sample Complete Fixed In Repair Complete All As Specified. 133 S&F Stainless Steel Plate Rack Of Size Not Less Than 90Cmx75Cm(Wt N. Less Than 4 Kg) Fixed With Stainless Steel Screw Including Taking Out Old Unserviceable Wooden Plate Rack As Approved By Ge Complete All As Specified. 134 S&F In Repairs Chromium Plated Shower Roses With Swivel Joints 125 Mm Dia Size Incl Fixing To Gi Pipe/Union Fixed Make-Jaquar /Hindware/Kohlar. 135 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 Finished Even And Smooth ( Without Using Extra Cement ) With Sagol Finish On Plastered Surface Complete All As Specified And As Directed. 136 M&L For Preparation Of New Decorated Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Exterior Emulsion Over One Coat Of Primer And Over 2Mm Thick Putty For Levelling And Smoothening, Complete All As Specified And Directed. 137 M&L Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Oil Bound Distemper Over 1.5Mm Thick Wall Care Putty Complete All As Specified And Directed. 138 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 139 S&F Sinks With Drainage Board Made Of Stainless Steel Lmm Thickkitchen Or Laboratory With Plugs,Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. 140 S&F In Repair Brass Chromium Plated Sink Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar /Hindware/Kohlar 141 S&F Powder Coated Anodised Aluminium Frame For Doors, Windows Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And Directed. 142 S&F Frosted Glass 4.00Mm Thick Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.50Sqm In Each Panes Complete All As Specified And Directed. 143 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Sketon/Glased Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 144 S&F Factory Made Wpc Extruded Board Cnc Machine Cut Jali Fixed To Skelton Door As Per Approved Design Complete All As Specified And Directed 145 S&F Kitchen Cabinets Including All Fittings And Fixtures Incl The Follwing. (A) 19Mm Thick Plywood Of Commercial Block Board,Make: Kitply/Century Ply/ Green Ply(B) 1Mm Thick Commerical Lamination On Both Side Fixed To Black Board(Colour And Design As Approved)(C) Ss Pullout Basket Ss Finish Of Plain 15 X 20 X 6 (D) D Type Handle 100Mm Ss Finish(E) Pullout Basket Ss Finish Cutlery Wire Of Size 15X20X4 (F) 2Nd Class Hard As In Frame Work(G)Ss Channels For Pullout Basket As Required. (Note:- The Measurement Shall Be Taken From Front Elevation And Not Girthwise. 146 S&F Factory Made Upvc Brown Colour Door Shutter Made Of Extruded Profile With Wall Thickness Of 2.3Mm(+-0.2Mm) Door Profile With Hollow Section With Multy Chamber. Frame (60X62Mm),Sash(42Mmx67Mm).Sliding Interlock(One Verticle Length In Each Shutter)(45.5Mmx28Mm).Glazing Bead(24.5Mmx16Mm)Will Be Mittred Cut And Fusion Welded At All Corner.Including Drilling Holes For Fixing Hardware And Drainge Of Water Etc Am,.Making Arrangement For Fixing Of Hardware.Epdm Gasket,1.2+0.2 Mm Thick Galvanised Steel Frame(30Mmx21.5Mm).Sash (30Mmx18Mm)Profile To Be Inserted In Required Profile.Frame Will Be Finshed To The Wall With 8Mmx100Mm Long Fasteners.Hardware Touch Lockof Zinc Alloyed(Brown Powder Coated)Steel Roller System Including 5Mm Thick Glazing With Selected Quality Glass ,Aluminium Track And Bottom Rail For Two Track Sliding Fram,Wool Pine For Sliding Sash And Interlock. Note.The Unit Rate Coated By Contractor Includes Cost Of Glass And All Other Conncted Accessories,Net Opening Will Be Measured For Purpose.Make:H2O Window,Fenesta,Anuplast As Approved By Ge. 147 M&L For Rcc 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate In Any Situation Except Foundation Complete All As Specified And Directed. 148 S&F 10Mm Dia And Above Tmt Bars Cut To Length, Bend To Shape As Required Including Cranking, Hooking Ends & Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Complete All As Specified And Directd. 149 All As Item No 77 Here In Before But 5Mm Dia And Over Upto & Including 10Mm Dia In Stirrups, Spaces & Binder Complete All As Specified And Directd. 150 S & F Powder Coated Aluminium Window/Ventilator Shutters, Side Hung Type With Sash Bars, Including Necessay Joinery Cleats, Glazing Clips, Rubber Packing, Chowkats Aluminium Snap Beading, Screws, Suitable Handle Etc With And Including Sheet Glass Or Ordinary Glazing Quality Of 4Mm Thick And Incl Gi Wire Mesh 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm , Size Of Side Rails , Top Rails , Bottom Rail 85X44.5Mm And Size Of Chowkat Frame 101.6X44.45Mm And Thickness Of Aluminium Member Shall Be 1.40Mm Thick Complete All As Specified. 151 S&F For Prelaminated Particle Board 18/19 Mm Interior Grade Prelaminated On One Side With Decorative Choice Lamination And Other Side Balancing White Lamination Fixed With Screw Timber Frame Work Including Dismantling Board All As Specified. 152 S&F In Repair Continuous (Paino) Hinges, Mild Steel, Bright Finish Or Electrogalvanised Width Of Flap (When Open) In 40Mm All As Specified. 153 S&F In Repair 40Mm Dia, Cupboard Knobs Fixed With Nut, Screw And Washer Of Mild Steel Bright Finished All As Specified. 154 S&F Ball Catches With 8Mm Dia Steel Ball And Brass Body And Striking Plate Including Letting In And Fixing Complete All As Specified. 155 Supply & Fix In Replacement Of Modular Bell Push Switch 1 Way, 6 Amps, 1 Module Complete All As Specified. 156 Supply & Fix In Replacement Of Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified. 157 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 300 Mm Sweep 900 Rpm Metal Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Hole Making Louver Complete All As Specified And Directed By Engineer-In-Charge. 158 S & F Modern Energy Efficient Bedroom Muziris Wall Decorative Light Of Capacity 20 Watt Single Headed 240 Volt, Ip20 Rating, Controller Type (Push Button), Product Weight 1.04 Kg, Body Material (Metal), Power Source (Corded Electric),Lamp Base E27, Colour(Bronze) Incl Electrically Connection , Including Removing Of Unserviceable Decorative Light Fittings Of Any Description Complete All As Specified And Directed By Engr-In-Charge. Make: Philips Model No 31425 Or As Equivalent. 159 Excavating In Trenches N Exc 1.50M In Width And N Exc 1.50M In Depth For Foundation, Manholes Etc As Well As N Exc 10 Sqm On Plan Area And Getting Out In Soft/Loose Soil All As Specified And Directed. 160 M&L For Pcc 1:5:10 Type E-2, Using 40Mm Graded Crushed Stone Aggregate In Foundation, Filling And Mass Concrete All As Specified And Directed. 161 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 162 S&F Mild Steel Deformed Bars, 6Mm To 8Mm Dia Cut To Length, Bent To Shape Required Including Cranking And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0-.90Mm Dia Complete. 163 M&L For Form Work To Soffits Of Suspended Slabs Such As Roof Slabs Etc For Rough Finished Concrete Surface Complete All As Specified And Directed. 164 M&L For Form Work To Sides For Slabs And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10 Cm But N Exc 20 Cm Wide For Fair Finished Concrete Surface Complete All As Specified And Directed. 165 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work, Vertical Or To Batter For Rough Finished Flat Surfaces Of Concrete. 166 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions, Square, Rectangular Or Polygonal For Rough Finished Flat Surfaces Of Concrete. 167 M&L For Rendering In Cement Mortar (1:6) 10 Mm Thick Finished Even Smooth Complete All As Specified On Brick Or Concrete Surface Of Fair Faces. 168 M&L 15Mm Thick Cement Plaster In Two Layer First Coat In Cm 1:6,10Cm Thick & Second Layer 5Mm Thick In Cm 1:4 Mixed With Wpc 3% By Weight Of Cement Including Finishing Fair & Even On Brick Or Concrete Surfaces Of Othern Than Fair Faces. 169 M&L For 5Mm Thick Cement Plastering To Rcc Surfaces In Cm :1:3) Finished Even And Smooth W/O Using Extra Cement On Ceiling Surfaces. 170 S&F Stainless Steel Butt Hinges Medium Weight Cold Rolled Isi Marked Of Size 100 Mm Complete All As Specified And Directed. 171 M&L For Ms Framed Guard Bars Conforming To Fe-410-0 Or Fe-310-0 Welded To Steel Windows/Ventilations Complete All As Specified And Directed. 172 S&F Vitrous China Squatting Pan Of Orissa Patterns Long Pan Size 580Mx440Mm White With P Or S Trap Front Of Back Inlet And Foot Rest Including Long Band Any Pattern (Excluding Flushing Cistern And Flush Pipe) Including Provision For Lime Concrete Bedding. 173 S&F Pvc Flushing Cistern Low Level 10 Ltr Cap With Inlet Ball Valve Float And Handle Syphonic Action Type Incl Brackets And Flush Pipe Of Polythene Of Low Or High Density Isi Marked. 174 S & F In Repairs Vitreous China Oval Shape Wash Basin, White, Flat Back, Size 580 X 450 Mm Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets With 32 Mm Dia Waste Fittings, Brass, Chromium Plated With Waste Pipe Complete All As Specified. 175 S&F Looking Mirror Of Selected Quality Mounted On 6 Mm Thick Ply And Fixed To Wall With Wooden Plugs Chromium Plated Brass Screws And Washers. 176 S&F For Ci Floor Trap With Incl Jointing With Waste Pipe In Cement Mortar Of Size 100Mm. 177 S&F Gully Trap Stone Ware Square Of Round Mounted Type P Of Size 150X150Mm. 178 S&F 20Mm Dia Stop Valve Of Copper Alloy Screwed Down High Pressure With Crutch Or Butter Fly Handle Screwed On Both Ends For Iron Pipe Or For Union Fixed. 179 S&F Pvc Connection 15Mm Dia 600Mm Long Of Heavy Grade Screwed One End To Inlet Of Whb/Pillar Tap/Cistern Etc Complete Incl Brass Union Coupling On Both Ends Connfirming To Is-3076 Complete With Connector For Connection Old Water. 180 S& F For Ci Pipe 75Mm Dia Laid In Floor In Any Length With Or Without Cars With Cement Joint (Waste & Vent Pipe). 181 All As Per Item No 38 Here In Before But 100Mm Dia. 182 S&F For Ci Bend Any Radius Disminshing Pieces Or Tyes Of 100Mm Bore With Ducks For Or Head Rest. 183 S&F For Ci Branch Pieces Single Equal Or Unequal Ordinary Or Inverted Or With Paralled Brnach 100 Mm Bore. 184 S&F Cast Iron Sand Cast Pipe 100 Mm Dia With Or Without Cars With Cement Joint Fixed To Walls. 185 S&F Cast Iron 100 Mm Cowl. 186 M&L For Pcc 1:4:8 Type D-2 Using 40Mm Graded Stone Aggregate)75Mm Thick On In Sub Base Of Fllor .. 187 M&L For 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directd. 188 M&L For Coloured Glazed Ceramic Tiles On Vertical Surface (300Mmx600Mx7M) Thick Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 189 M&L For Coloured Non Skid Ceramic(300X300Mm) Tiles 7 To 8Mm Thick As In Floor Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 190 S&F Steel Ventilation With Top Hung Shutter Including Hinges, Steel Peg Stay Complete. 191 S&F 4Mm Thick Sheet Glass Of Figured,Pin Headed And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each. 192 M&L For Preparation Of Newly Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Over 10 Cm Width Or Girth Complete All As Specified And Directd. 193 M&L For Preparation Of Newly Plastered Surfaces And Applying Two Coats Of Cement Base Paint Over A Coat Of Chalk Whiting Complete All As Specified And Directd. 194 M&L For Three Coats Of White Wash On Wall Of Newly Plastered Surface. 195 S&F For Preparation Of Newly Plastered Surfaces And Applying Three Coats Of White Wash On Ceiling. 196 M & L For Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed. 197 S&F Factory Made Solid Pvc Moulded Door Shutter, With Particle Board Core, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face & 5Mm Thick Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing All As Specified. 198 S&F Aluminium Tower Bolt 150Mm Long Stove Enamelled Black With Bright Bolt & Fixed. 199 S&F Aluminium Sliding Door Bolt With Hasp And Staples Type Bolt Type , 300Mm Long Stove Enamelled And Fixing Clips Of Sheet Cast Or Extruded Section Or Cast Aluminium Alloy And Fixed All As Specified. 200 S&F Aluminium Alloy Handle Of 100M Size Oval Type Stove Enamelled & Fixed All As Specified. 201 M&L For Rendering 10Mm Thick Cm (1:4) On Roof Slab Top, Mixed With Water Proofing Liquid Finished Even And Fair Without Using Extra Cement Complete All As Specified. Note: Water Proofing Liquid Shall Be Measured And Paid Separately. 202 M & L For Cleaning The Newly Plastered Surfaces Of Concrete ( Roof Etc) With Wire Brushes And Applying Water Proofing Treatment As Under :-I) Apply One Coat Of Oil Bound Bituminous Primer @ 0.25 Kg/Sq.M Ii) Providing And Laying 3 Mm Thick App Modified Water Proofing Membrane Weighing Not Less Than 3.5 Kg / Sqm Reinforced With Non Woven Polyester Mat Weighing Not Less Than 160 Gm/Sqm All As Specified Procured From Any One Of The Approved ManufacturerS Iii) Apply One Coat Of Solar Reflective Bituminous Aluminium Paint @ 0.15 Kg/Sqm Over Membrane Over Non Assesble Roof Surfaces Complete All As Per ManufacturerS Instructions And As Directed . 203 M/L Brick Work In Cm1:4, In Half Brick Thick Wall. 204 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 205 S/F Vitreous China Toilet Paper Holder Fixed To Walls With Chromium Plated Cp) Brass Screws 206 S/F Vitreous China Soap Dish Of Appx Size 160*160*90Mm Any Type Fixed To Plugs With Chromium Plated Brass Screws 207 S/F Sheet Glass Shelf Assembly Consistig Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Brackets Guard And Railing 60Cm Long 208 S & F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D Type, 60 Cm Long Between Flanges Complete All As Specified. 209 M & L For Granite 20 Mm Thick Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Griding And Polishing Types All As Specified. 210 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 211 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 212 S&F Health Faucet Including Ms/Anodised Hanging Device Fixed Complete All As Specified And As Directed. 213 Surface Excavation Not Exceeding 30Cm Deep And Averaging 15Cm Deep And Getting Out In Loose / Soft Soil All As Specified And Directed. 214 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 215 M & L 100Mm Thick Pcc 1: 4: 8 Type D2 (Using 40Mm Graded Stone Aggregate) As In Sub Base Complete All As Specified And Directed. 216 M&L For Machine Pressed Precast Concrete Interlocking Paver Block Rubber Moulded Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness, M-35 Grade With Grey And Pigment As In Floor/Pavement Complete All As Specified And As Directed. 217 M&L For Providing Precast Concrete Type C-1, 1:2:4(Using 20Mm Graded Stone Aggregate) As In Kerb Blocks With Plain Fiar Faces, Including Chamferes, Weathering, Throating Etc And Setting In Mortar 1:4 Complete With Joints To Match. 218 M&L For Cement Concrete Type 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And As Directed. 219 M & L For Sand Filling Under Floors Or In Foundation Including Watering And Consolidation 220 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X25 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 221 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 222 M&L For Boring Of Holes Under Road, Pavement, Hard Standing By Trench-Less Technology Using Ultrasound Technique And Necessary Machine Suitable To Pass Through 40 To 80 Mm Bore Gi Tubing And Cable Etc Complete All As Specified And Directed.Note: Gi Pipe Shall Be Measured And Paid Seperately Under Relevant Item.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
2.
Defence #11465339 Price Bid
Tender for Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Not Exc 1.50 Sqm Each And Removing From Site Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc 1.50 Sqm Eachand N Exc 4 Sqm And Removing From Site Complete All As Specified And Directed.. , Demolition Of Brick Work Built In Cement Mortar Including All Quions, Arches, Pillars Etc But Excluding Ashlar Facings Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Complete All As Specified And Ditrected. , Dismantling Of Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Any Description Or Thickness In Floors, Aprons Etc. Complete All As Specified And Directed. , Demolition Of Cement Concrete (Reinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Reinforcement Cut As Required To Facilitate Demoltion Complete All As Specified And Directed. , Taking Down Cement Plaster On Brick Or Stone Wall Etc Including Racking Out Joints, Hacking For Key Scrubbing Down With Water Etc To Receive New Plaster Etc.Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 125 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc. Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 105 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc Complete All As Specified And Directed. , S & F For 35 Mm Thick Factory Made, 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebeated And Prepared To Received Glass, Gauzed, With Out Sash Bar Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitered Beads For Securing Glass Etc, Size Of Member Of Shutter As Per Specified In Ssr Part-I Section 8, Clause 8.24 (A) And For Door And Fixed With Chowkats, Chemically Pressure Treated Complete All As Specified And As Directed. , S&F For 35Mm Thick 2Nd Class Hard Wood Plain, Framed Pannelled Shutters (Two Panel) With Lock Rail And Panel Of 9Mm Bwp Commercial Ply Or 12Mm Veneered Particle Board Wiyh Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per (Is : 1003 Part-I , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And As Directed. , S&F Powder Coated Aluminium Frame Work (Min Thickness Of Powder Coating 50 Micron) For Doors, Windows, Ventiltors And Partition, (Sliding/Openable/Fix Doors, Windows, Ventilator), Etc With One, Two Or More Rebates (Reqd As Per Site), Section Weighing Not Less Than 0.55 Kg/M, Including Joining Cleat For Fixing With Dash Fasteners Of Required Dia And Size, Incl Filling Up Gaps At Junctions, Ie Top, Bottoms And Sides Etc Complete All As Sspecified And Directed.. , S&Fpowder Coated Aluminium Window And Ventilator Shutters, Sliding/Openable/Fixed (As Per Required At Site) Type Without Sash Bar, Alu Section Weighing 0.55 Kg/M, Including Necessary Locking Arrangement, Guide Wheels, Joining Cleats, Glazing Clips Rubber Packing Anodised Alu Snap Beading Screws Etc Complete All As Specified And Directed. , S&F For Sheet Glass Palin/Coloured (As Per Directed By Engr-In-Charge) 3Mm / 5 Mm Thick Best Quality And Glazing With Rubber Packing, Screws Or Glass Putty In Squares Exc 0.5 Sqm Each Pane Complete All As Specified And Directed. , S & F For Stainless Steel Wire Cloth Of 0.36Mm Dia Wire And Average Width Of Aperture 1.40Mm & Fixed With Tacks Or Screws, Wire Staples, Etc Complete All As Specified And Directed. , S&F Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube With Wooden Grain Printed Pvc Sheet Used Inserted Of Plain Colour Pvc Sheet & Edges Will Be Painted To Match With Printed Sheet Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail. Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Complete All As Specified And Directed. , S&F 100 Mm Long Mild Steel Butt Hinges, Cold Rolled, Medium Weight Complete All As Specified And Directed. , S&F For 125Mm Long Anodised Aluminium Barrel Tower Bolt Of Extruded Section Complete All As Specified And Directed. , S&F 150Mm Long Anodised Aluminium Handles, Cast Type Complete All As Specified And Directed. , S&F300mm Long Aluminium Alloy, Anodized Sliding Door Bolt With Hasp Stapple ( Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy And Fixed Complete All As Specified And Directed. , S&F For 20 To 25 Mm Dia Stainless Steel Drapery Curtain Rod With Brass /Nickel Chrom Polish / Designer Lattos And Brackets Complete All As Specified And Approved By Engr-In-Charge Including Taking Out Old Pelmet With Curtain Rods Complete All As Specified And Directed. , S&F 300 Mm Long Mild Steel Ordinary Rat Tail Rod Pattern Spring Including Roller And Roller Plate Complete All As Specified And Directed. , S& F Floor Door Stopper Of Aluminium Alloy Body And Tongue ,Anodised ,With Hard Drawn Steel Spring ,Fixed In Floor Overall Length Of Cover Plate 140Mm Complete All As Specified And Directed. , S & F For Pvc And Cupboard Shelf/ Partition/ Frame / Shutter Of 18Mm Thick Side Of Panel Externally Impact Perfact Finish To The Shutter And Joined Together With Solvent Cement Adhesive 8Mm Thick (4Mmx2)X12mm Wide Pvc Sheet Is Used As Gap Insert For Top & Bottom Rail, 18Mm X 1Mm Pvc Edge Lipping Is Done On Top & Bottom Side Using Pvc Solvent Cement Adhesive, Incl Hasp And Stable For Locking Purpose, Etc Complete As Per Direction Of Engr-In-Charge, Manufactures Specification And Drawing Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc. 6M Mean Radius Built In Cement Mortor 1:6., Etc Complete All As Specified And Directed. , M & L For Brick Work With Sub Class B Modular Bricks, Straight Or Curved On Plan To Any Radius Built In Cm 1:4 In Half Brick Thick Walls Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick In Cm 1:4 On Other Than Fair Faces Of Brick Or Concrete Surface With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed.(Note:- Liquid Water Proofing Compound To Be Measured Paid Separately) , M&L For Rendering 5Mm Thick In Ceiling Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , Supply Only Integral Water Proofing Compound Complete All As Specified And Directed. , M & L For Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , M&L Plain Cement Concrete 1:4:8, Type D2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor Complete All As Specified And Directed . , M & L 25Mm Thick Cement Concrete Type B-0, 1:2:4 (Using 12.5 Mm Graded Aggregate) For Levelling Course In Floors Complete All As Specified And Directed. , M&L For Scratch Free Vitrified Light Shade Floor Tiles 10Mm Thick (Square Or Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm ,In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With And Including 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directed. , All As Per Item No 35 Above But As In Skirting/ Dado Etc With And Including 10Mm Thik Backing Coat In Cement Mortar 1:4 An Wall Complete All As Specified And Directed. , M & L For Non Skid Joint Free Coloured Ceramic Floor Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exc 0.11 Sqm But N Exc 0.18 Sqm,In Floor Etc Set & Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With 15Mm Thick Screed Bed Or Bedding Layer In Cm (1:6) Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Wall Tiles (Textured And Design As Required) In Vertical Surface 450X300x7mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Rendering In 1:4 Cm Complete All As Specified And Directed. , M & L For Applying Two Coat Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. , M & L For Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Cement Primer And Over A Coat Of 2 To 3Mm Thick Wall Care Putty Complete All As Specified And Directed. , M & L For Preparation Of Newly Plastered Surfaces Of Walls And Applying Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gms/Litre, Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per Manufacturers Specification. Two Or More Coats On New Work Over A Coat Of Wall Care Putty 3Mm Thick Complete All As Specified And Directed. , Material And Labour For Apply Two Coats Of Anti Fungal Weather Coat Acrylic Emulsion Paint Over A Coat Of Primer On New Surfaces Including 2 -3 Mm Thick Wall Putty, Complete All As Specified And Directed. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Claim On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M & L For Preparing New Plastered Surface On Ceiling And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surface Including Complete Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Applying Two Coat Of Oil Bound Distemper On Walls Over 2Mm Thick Plaster Of Paris Putty As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surface Including Complete Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) On Walls Over 2Mm Thick Plaster Of Paris Putty As Specified And Directed By Engr-In-Charge. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Claim On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M&L For Three Coat Of White Wash On Old Surface On Ceiling Including Preparation Of Surface Complete All As Specified And Directed. , M & L For Machine Cut Kota Stone Slab Flooring 20 To 25Mm Thick (Size Not Less Than 550Mm X 550Mm) Laid & Jointed With Grey Cement Mixed With Pigment To Match The Shade Of Slab Including Rubbing And Mirror Polishing Finished Laid Over And Including 20Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And As Directed. , M & L For Machine Cut Kota Stone Slab Flooring 18 To 20Mm Thick As In Riser Of Step, Dado And Skirting Over And Including 10Mm Thick 1:4 Cm Backing Coat On Vertical Surface Of Wall With Rubbing And Mirror Polishing Finished Complete All As Specified And As Directed. , M&L Plain Cement Concrete 1:3:6, Type B1( Using 20Mm Graded Stone Aggregate) 75Mm Thick As In Plinth Protection Complete All As Specified And Directed . , Demolition Of Cement Or Lime Concret In Any Despription Along With Tarfelt Treatment In Sunken Portion / Roof And Cement Mortar Bedding From Roof Removal Rubbish Out Side Md Land Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:2:4 Type B-0 Using 12.5Mm Graded Crushed Stone Aggregate As In Sunken Portion, Subbase, Etc Complete All As Specified And As Directed. , M&L For Rendering 10Mm Thick In Cm 1:4 On Roof Suraces With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Water Proofing Treatment To Sunken Portition / Roof Etc. In Following Sequence:- (I) Properly Cleaning And Drying The Surface (Ii) Applying A Coat Of Bitumen Primer @ 1.2Kg/Sqm And Primer Shall Be Allowed To Dry Over Night. (Iii) Laying App Based Modified Water Proofing Membrane Of Weight Not Less Than 3Kg Per Sqm And Thickness Not Less Than 3 Mm, With 100Mm Overlaps, Sealed And Bonded To The Surface By Torchon Method (Iv) Applying Two Coat Of Bituminous Based Aluminum Painting @ 0.15 Kg/Sqm Each Coat On Water Proofing Treatment With Preparation Of Surfaces Complete All As Specified And Directed. , S&F Vitreous China Wash Down Water Closet Pan Semi Pedestal Pattern(Anglo Indian Type), White (Excluding Fixing Bolts, Flushing Cistern And Flush Pipe(Excluding Flushing Cistern And Flush Pipes) Including Connection To Trap And To Flush Pipe Etc And Lime Concrete Bedding Including P Or S Trap Complete All As Specified And Directed. , M&L In Repairs Pvc Valve Less,Syphonic Action Type Flushing Cistern,Low Level ,White With Inlet Ball Valve,Float And Handle Including Brackets And Connection To Pipe And Fixing Of Chain And Pull Or Lever If Any Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back, Size 550X400 Mm Including Bracket, Taps ,Waste Pipes , Chain And Plug Etc Complete All As Specified And Directed. , S & F In Repairs Pvc (Swr) Nani Trap / Floor Trap Plain Or Multi With Stainless Steel Grating Incl Joining To Waste Pipe With Solvent Cement Joint Dia Of Outlet 75Mm Bore Complete All As Specified And As Directed. , S&F In Repair 110Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S&F In Repair 75Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S & F In Repair 110 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repair 75 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repairs 110Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , S & F In Repairs 75Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , M & L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Not Exc 10Cm Girth Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Dia Old Serviceable / Unserviceable Steel Tubing Any Grade And Connections Cleaning For Re-Fixing Or Removal To Store Complete All As Specified And Directed . , All As Per Item No 65 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F Steel Tubing Medium Grade ,Galvanized With All Fitting Such As Bend ,Elbow, Socket,Tees,And Fixed Complete To Wall Or In Ceiling Or In Floors Including Cutting Threading And Making Forged Bends On Pipes Ms Hooks Etc ,For 15Mm Bore Pipes Complete All As Specified And As Directed. , All As Per Item No 67 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F In Repair For 15Mm Bore Bib Taps Chromium Plated With Crutch Or Butterfly Handle ,Screwed Down , Screwed For Iron Pipes Or Brass Ferrule Complete All As Specified And Directed. , S&F In Repair Cp Angle Stop Cock Of 15Mm Bore Screwed Down For High Pressure With Crutch Or Butter Fly Handle ,Screwed Both End For Iron Pipes Complete All As Specified And Directed.. , S&F In Repair Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe 15Mm Bore Complete All As Specified And As Directed. , S&Fixed In Repair 125 Mm Size Chromium Plated Shower Rose With Siwel Joint Suitable For 15 Mm Bore Gi Pipes Complete All As Specified And Directed. , S&F In Repairs Pvc Connection 15Mm Size With Ptmt Nuts Of Length 450 Mm Long Complete All As Specified And As Directed. , S& F In Repair Rotational Moulded Polyethylene Water Storage Tank 1000 Liters Capacity (Cylidrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Incl Brass Float Valve 20Mm Dia And Dismantling Water Tank Complete All As Specified And Directed. , S & F In Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats (Minimum Weight 300 Grams) Complete All As Specified And Directed. , S&F In Repair Stop Valves Fancy Type Chromium Plated With Long Shanks Fixed With 15 Mm Dia Bore Pipes Complete All As Specified And As Directed. , M & L High Strength Steel Deformed Tmt Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping Columns,Hookings Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.90 Mm Dia Or Securing With Clips, Etc Complete All As Specified And Directed. , M & L For Formwork Fair And Finished Surfaces To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Bands, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Complete All As Specified And Directed , M&L Reinforced Cement Concrete M-25 Using 20 Mm Graded Stone Aggr As In Beams, Bands, Cantilvers, Bressummers, Linters, Chajjas, Etc Over 1.5M Span Etc Complete All As Specified And Directed , Demolition And Breaking Up 150Mm Dia Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete ) And Set In Cement Mortar Complete All As Specified And Directed. , M&L For Concrete Bed To Drain Pipes Including Packing Under, And Haunching Against The Sides Of 150 Mm Bore Pipes In Cement Concrete 1:3:6 Type C-2 ( Using 40 Mm Graded Stone Aggregate) After They Are Laid And Tested Complete All As Specified And Directed. , M&L For 150 Mm Bore Salt Glazed Stone Were (Sgsw) Drain Pipe Grade A Laid To Slope In Tranches And Jointed In Cement Mortar (1:1) Including Necessary Testing For Ensuring Teak Proofing Complete All As Specified And Directed. , M & L For Cutting Into Existing Manhole For Connecting New Drains And Making Good To Pipes And Rendering Cutting Out Existing Benching For And Forming Branching For And Forming Branch Channel (1/2 Round Or ¼ Section ) In Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate Smooth Finished And Reforming Benching As Specified And Directed For 150Mm Dia Of Pipe Complete All As Specified And Directed. , M&L Plain Cement Concrete 1:4:8, Type B2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor Complete All As Specified And Directed . , M&L For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block (Glossy Finish) Of M-35 Gde Of Approved Shape, Size And Colour Conferming To Is 15658-2006 And Laid Over And Including 25Mm Thick Grid Cushion Complete All As Specified And Directed. , S & F For Precast Cement Concrete Type B-1 (1:2:4) (20Mm Graded Stone Aggregate) As In Kerb And Edging To Road And Footpath Etc, Including Chamfered, Weathering, Throating Etc And Setting In Cm (1:4) Complete All As Specified And Directed. , S & F In Repairs Ms Framed Work As In Doors Or Gates Of Angle Iron, Door Frame Or Other Section With Gusset Plate, Rails, Braces And Stair Case Etc Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering Etc, To Prepared For Hanging Or Sliding With Including Either Hooks And Hinges Also Fastening Grills, Grating, Hold Fast Of Doors And Windows Chowkat Etc, With Ends Of Bars Shouldered And Or Riveted, Or Forget Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework Of Water Tanksand Fixing And Similar Work Confirming To Fe 290 Gde E-165 Complete All As Specified And As Directed. , M&L For Preparation Of New Steel Surfaces Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , Excavation In Trenches N.Exc 1.5M Wide And N.Exc 1.5M In Depth For Foundation Or Etc, For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc N.Exc 10 Sqm On Plan And N.Exc 1.5M In Depth And Getting Out In Soft/Loose Soil, Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:4:8 Type D2, Using 40Mm Graded Stone Aggregate, As In Foundation Filing, And Mass Concrete , Etc Complete All As Specified And Directed , Removing Excavated Material (Soil) To A Distance Not. Exc. 50 Mtr And Depositing Where Directed At A Level Nexc 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. , M & L Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate) As In Coping, Bearing Course, Manhole/ Drain Channels Etc In Including Necessary Formwork Complete All As Specified And Directed. , M&L For Cement Concrete 1:3:6 Type C-1 Using 20 Mm Graded Stone Aggregatre As In Surface Channels And Drains Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel Exc 30 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms Moulds, Mitred/Stopped Ends Etc Complete All As Specified And Directed. , M & L For Preparing New Plastered Surface On Walls And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M & L 20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite With Providing 15Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And As Directed.. , S&F In Repairs Standard Size Ewc White Colour With P/S Trap White Coloured With And Including Pvc White Coloured Seat Cover Including All And Connecting To Flushing Cistern Complete All As Specified And Directed. , Supply And Fixing Health Faucet Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete All As Specified And Directed. , S & F In Repair Soap Dish With Including Chromium Plated Brass Screws And Wooden/Plastic Cleats ( Minimum Weight 105Gm). Complete All As Specified And Directed. , S & F In Repair Tubular Towel Rail 20Mm Dia 600Mm Long Of Brass Chromium Plated Fixed With Including Chromium Plated Brass Screws And Wooden/Plastic Cleats Complete All As Specified And Directed. , Dismantling Of Asbestos Cement (Corrugated, Semicorrugated, Etc.) Sheets In Roof Covering Incl Ridges Etc Complete All As Specified And Directed. , S&F 0.50Mm Thick (Total Coated Thickness) Pre-Colour, Pre-Profiled Galvalume Sheets Of Required Colour And Design Having Tensile Strength Of 550 Mpa As In Roof, Wall Cladding, North Light Curves, Fixed With Zinc Coated Self Drilling Fastener Including Epdm Washer Complete Laid With One Corrugation Side Laps And Min 150Mm End Lap Laid To Slope All As Per Manufacturer/Profile Maker Instruction Complete All As Specified And Directed. , S & F Pre - Painted Galvalume Aluminium Zinc Coating Plain Sheeting 0.50 Mm Thick Of Required Colour And Shape Having Tensile Strength Of 550 Mpa As In Ridge Valley,Gutters,Barge Board,Roof Covering / Cladding To Wall, Fixed With Self Tapping Screwes Complete All As Specified And Directed. , S & F 600Mm X 450Mm Size Beveled Edge Mirror Of 6Mm Thick Selected Quality Mounted On 6Mm Thick Plywood With Chromium Plated Screws With Washer Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M )Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M )Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Jammu And Kashmir View Result →
3.
Health and Family Welfare #11459387 Technical Bid
procurement of dental materials to h. p. government dental college and hospital, shimla-171001 , alginate - per gram , adhesive plaster- per meter , articulating paper - per pkt. , activator tube for facebow , air rotor bur: assorted- per bur , applicator tips -per pkt , addition silicon putty i)regular ii)medium body iii)light body- per pkt , acrylic stone trimmer - assorted , acrylic stone- metal trimmer , amelogenin for periodontal regeneration , arch bar different type- per pkt , assorted brackets 022 mbt premolar to premolar upper lower-per kit , base plate - per pkt , broaches-per pec. , bonding agent 7th generation bond- per ml , bone grafting material: synthetic containing either hydroxyatelie and beta tri calcium phosphate crystals , bp blade size=11,12,15,22,23 nos.- per pec. , bp blade with handle (disposable)-size=11,12,15 nos.- per pec. , bleaching kit agent 37.5% h2o2 - per ml/mg , bleaching kit agent 10% carbemide peroxide- per ml/mg , bio dentine- per gm , bulk fill composite universal restoration , bite registration material , bonding agent for core buildup material , band material premolar- per feet , baccishield solution-ltr. , bupiva caine , cold cure: pink (liquid & powder), clear (liquid & powder) & liquid- per ml/gm , compound benzoin tincture , cold mould seal -per ml , campher phenol , clove oil - per ml , calcium hydroxide powder , crown cutting bur kit , ca(oh)2 iodoform paste syringe/ tubes- per tube , ca(oh)2 based root canal sealer- , ca(oh)2 tubes- per tube , core buildup composite/material with bonding system(conditioner+adhesive-a,b)- per ml/mg , cord poker , composite preparation and finishing kit , composite polishing kit , composite polishing discs assorted with mentstill , composite polishing strips assorted , calcium hydroxide point (15-40) , carbide bur: assorted- per bur , cotton roll , cotton roll- preformed , ceramic finishing kit , cotton bandage 2 , cotton bandage 6 , collagen memberan made of pure type-i collegen 25x25x.2mm- per pkt , collogen periodontal chip -sterile collegen periodontal chip impregnated with 2.5mg chlorhexidine gluconate and thickness 1-2mm , collagen plug type-i , cancellous bone block- rigid with proper fixation size 10x10x20mm , chin cap with vertical pull head gear- per pec. , caries detection dye , denture adhesive powder- per gm , dental varnish- per ml , dental floss , devitaliser arsenic free- per gm , diamond bur: egg shaped, wheel round and wheel burs , disinfectant sleeves for all types of hand pieces etc. - per sleeves , disinfectant for cleaning of burs - per ml , disinfectant and sterilizing solution for surgical instruments - per ml , dental implant sprial- bioline (per implant) , dental implant conical- bioline (per implant) , die stone -per kg , dental stone/stone plaster- per kg , drip set bt/iv set , distilled water for autoclave liter , dextrocose injection 5% , disposable syringes -2ml , disposable syringes -5ml , disposable syringes -10ml , disposable syringes -20ml , disposable sterilized gloves (6,6.5,7 & 7.5 no.) , disposable three layer face mask , disposable nitrile gloves (6.5 & 7 no.) , disposable surgical caps -per pec. , disposable surgical gowns- per pec. , disposable surgical drape set- per pec. , disposable patients drape sheet- per pec. , disposable rvg sleeves- per sleeves , disposable shoes cover-per cover , disposable glasses- per pec. , disposable tisses- per pec. , disposable plasitc impression trays-upper & lower- per pec. , elastic adhesive bandage10cmx4/6m , etchant- per ml/gm , endo rotary file protaper- per pec. , edta gel , ethylene /vinyl acetated co-polymer fiber diameter 0.5 mm containing tetracycline (1 pkt x4 fiber carton) , endo access burs-per bur , elastomeric modules – per pec. , esthetic preformed 10 teeth s.s crowns: anterior / posterior ki t(d4,d5,e4,e5) , elastomeric chain: short, closed & open- per pkt , elastics pkt. extra oral 8 oz, intra oral 1/4, 5/16 & 3/16- per pkt , finger plugger -per pec. , finger spreader- per pec. , flucal gel , flowable composite with etchant - per ml/gm , flowable composite without etchant , flux - per ml , facebow standard short or long- per pec. , fiber reinforced splinting (3 units 8.5cmx2mmx0.2mm)- per strip , file for negotiating calcified canals pkt , formalin 10% -per ml , formalin tablet- per tab , glycerin bottle -per ml , green stick - per pec. , glass ionomer cement lutting - per mg/ml , glass ionomer cement –type-ii -per mg/ml , glass ionomer cement re-inforced restorative-per mg/ml , glass ionomer cement light cure-per mg/ml , gingival cutting burs-per bur , gingival barrier , glucometer strips- pkt , gp point 2%- all type- per pec. , gp points (pkt )=4% & 6% (all type- per pec. , gp sticks , gum paint (ml) , gate glidden drills: size #1, #2, #3- per pec. , gutta purcha solvent- per ml , gc plus tooth mouse- per gram , gauze than- per meter , heat cure pink veined- per mg/ml , heat cure light pink- per mg/ml , h-files different type- per pec. , hand sanitizer -per ml , h² o² solution ml , hand piece oil - per ml , hyrex screw (11 & 13mm)- per pec. , hand niti files -per pec. , isoflurance , impression compound , interim restorative material eugenol free- per gm , inlay wax- per gm , investment material gypsum bounded , investment material phosphate bonded - per gm , intra oral tips for light body- per pec. , k-files different type- per pec. , kit for micro abrasion for teeth , kedo s gold assorted {d1,e1,u1-4%&6% each} , lysol -bottle , lignocaine with adrenaline , lignocaine plain-2% , lignocaine spray , lignocaine jelly-2% , light cure syringes of all kinds of shades , light cure syringes various shades, nano hybrid composite with dual shade , light cure bonding agent for orthodontic bracket(transbond)- per mg/ml , light cure cavity liner- per gm/ml , light cure denture base resin sheets-pkt , ligature wire (.001)- per spool , ligature wire 26 gaze- per spool , light cure opaquer composite syringes (assorted set of shades) , lentulo spiral- per pec. , lingual button (bondable) - per pec. , lingual button (weldable) - per pec. , lip bumper without loops- per pec. , lingual sheath - per pec. , leukoplas adhesive tape- per tap , lazer(8w) perio surgical tips , mackintosh - per meter , molar band material { 0.005x0.180 and 0.006x0.180)- per roll , molar tubes (bondable) upper/lower- single, double & triple- per pec. , molar tubes (weldable) upper/lower- single, double & triple- per pec. , molar tubes 2nd (bondable) - per pec. , molar tubes bondable upper/lower-single - per pec. , mercury - per gram , matrix/mylar strip- per pec. , mouth wash chlorhexidine-per ml , mouth wash betadine - per ltr. , molding wax , membranes for guided bone regeneration resirable bilover collagen memberances- per pec. , mineral trioxide aggregate- per gm , microporus hypoallergenic pressure sensitive adhesive tape for medicaldiffrent type- per meter , micropore surgical tape , medical examination gloves pkt , matrix band (1 & 8 nos.)- per pec. , mini implants screws( 1.5x8, & 1.5x10) , mummifying agent (formacresol)- per ml , metrogyl solution , micro motor burs: tf- fine, round= coarse & straight fissure= coarse , n-95 face mask , ni-ti files- per pec. , niti open coil spring (012”x030) , niti closed coil spring (9mm,11mm) , nylon 4.0 cutting needle pkt , ni ti upper & lower (pkt) , orthodontics bone screws (2x12 & 2x14) , orthodontics mini implant kit , plaster of paris (pop)- per kg/gm , povidine- iodine solution 10% , povidine- iodine solution 5% , povidine- iodine scrub 7.5% , partial teeth u/l anterior assorted (set) 23,24,25,26,27- per set , partial teeth u/l posterior- per set , polishing buff- per pec. , paper point- per pec. , peeso reamer - per pec. , pit & fissure sealant - per ml/mg , plaque disclosing solution two tone disclosing solution to distinguish between old and new plaque 10ml , periodontal pack non eugenol- per gm , pre fabricated posts- per pec. , protraction face mask(petit) , pumice powder- per gram , preformed bands molar permanent ( first permanent molar) - per feet , preformed silicon tip sectional matrix and reinforced rings of two sizes , pattern resins for post and core , polishing strips proxa- per pec. , posterior composite universal (syringes) , ringer lactate-rl , reamer-all type per pec. , retraction cord - per gm/coil , rubber dam sheet size 5x5- per pec. , rubber polishing cups- per pec. , reproximation diamond strip both ended - per pec. , resin reinforce zinc oxide eugenol cement- per ml/gm , resin cement (self etching self adhsive)- per gm. , root canal biocremic sealer -pkt , root canal irrigation solution containing tween-80 , silver amalgam alloy - per gm , suction tip - per pec. , suction catheter: , sponge stone/gelatin sponges , ss crown prefabricated for deciduous molar 3 & 4 nos. , strip crown deciduous ant. , strip crown permanent ant. (box) , spirit -per ltr. , soap (liquid) , soap-per cake , stainless steel wire (pkt) , stainless steel upper & lower (pre-formed) , stainless steel upper & lower wire (straight length) , stainless steel wires (straight length) , surgical burs assorted size pkt , soft reliner permanent (elastomeric) , separators pkt , silver solder pkt , standard expansion screws , seddle matrix system 0.035mm , sodium hypochloride 3% solution , sodium hypo chloride 5% solution , sodium chloride (ns) 0.9% injection , suture silk 4-0, 16mm 3/8 reverse cutting pkt- per pec. , silk suture 3-0, 26mm 3/8 reverse cutting pkt- per pec. , silk suture 5-0, 26mm pkt- per pec. , silk suture with cutting needle 3-0, 26mm pkt- per pec. , silk suture with cutting needle 2-0, 26mm pkt- per pec. , silver diamine fluoride , side vented needle 30 gaze , sectional matrix system-kit , teeth set full : 23,,24,25,26,27- per set , temporization material all shades cool temp. (each shade)- per gm , temporization material , tooth vitality cold test spray , tapered fissure bur flat ended , trans metal burs: tapered fissure, assorted size , tma (straight length)-per pec. , tma -arch wires (pkt)-per pec. , universal dispensing gun for addition silicon- per pec. , ultrasonic activator irrigation tips , vaseline , veinflon , vicryl suture 3.0 reverse cutting body 16mm with 112 circular cutting needle - per pec. , vicryl suture 3.0 reverse cutting body 16mm with 112 circular cutting needle absorbable- per pec. , vicryl suture 4.0 with reverse cutting needle 25 mm- per pec. , vicryl suture 5.0 13 mm 3/8 with reverse cutting needle , wedges - wooden- per pec. , x-ray film iopa - 31 x 41mm -per pkt , x-ray film iopa- peado-per pkt , x-ray film for dry view laser printer :8 x 10 -per pkt , x-ray film for dry view lasar printer:10 x 12 -per pkt , x-ray film occlusal 2.25”x 3”-per pkt , x-ray film developer to develop -per ltr , x-ray film fixture to fixture -per ltr. , dicom x-ray film for cbct-per pkt , a4 glossy sheet-pkt , zoe+idoform (alvogyl)- per gram , zoe impression paste , zinc phosphate cement , zinc oxide powder with eygenol liquid , zirconomer restoration material , 2% chlorhexidine gel- per ml , 2% chlorhexidine solution - per ml , 3d expansion screw with 2 or 3 activation
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Himachal Pradesh View Result →
4.
Power #11454678 AOC
Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 2827583; 2827583; Service Provider - Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5M In Width As Well As 10 Sqm On Plan) Including Disposal Of Excavated Earth, Lead Upto 50 M And Lift Upto 1.5 M, Disposed Earth To Be Levelled And Neatly Dressed. , Supplying And Filling In Plinth With Local Sand/Stone Dust Under Floors Including,Watering, Ramming Consolidating And Dressing Complete. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level : 1:2:4 (I Cement 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size). , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering-All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Brick Work With Common Burnt Clay/Fly Ash F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Kg , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Openings /Wooden Frames With Rawl Plugs Screws Etc. , Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Cold Twisted Bars , Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10x15cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) , Neat Cement Punning , 12 Mm Cement Plaster 1:4 (1 Cement : 4 Coarse Sand) , 12 Mm Cement Plaster 1:6 (1 Cement : 6 Coarse Sand) , 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix 1:6 (1 Cement : 6 Coarse Sand) , Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete As Per The Direction Of Engineer-In-Charge. Made Of G.I. Wire Of Dia. 4 Mm , Providing And Laying Four Courses Water Proofing Treatment With Bitumen Felt Over Roofs Consisting Of First And Third Courses Of Blown Bitumen 85/25 Or 90/15 Conforming To Is : 702 Applied Hot @ 1.45 Kg Per Square Metre Of Area For Each Course, Second Course Of Roofing Felt Type 3 Grade-I (Hessian Based Self Finished Bitumen Felt) And Fourth And Final Course Of Stone Grit 6Mm And Down Size Or Pea-Sized Gravel Spread At 6 Cubic Diameter Per Square Metre Including Preparation Of Surface But Excluding Grading Complete With Bitumen Felt (Hessian Base) Type 3 Grade I Conforming To Is : 1322. , Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete.40 Mm Thik With 20Mm Nominal Size Stone Aggregate , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M. , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade One Or More Coats On Old Work. , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of G.S. Sheet , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of Asbestos Sheet , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Providing Corrugated G.S. Sheet Roofing Including Vertical/Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275Gm/ M² , Lettering With Black Japan Paint Of Approved Brand And Manufacture , Making The Opening In Brick Masonry Including Dismantling In Floor Or Walls By Cutting Masonry And Making Good The Damages To Walls, Flooring And Jambs Complete, To Match Existing Surface I/C Disposal Of Mulba/ Rubbish To The Nearest Municipal Dumping Ground. , Carriage Of Material By Mechanical Transport Including, Loading, Unloading And Stacking :Earth, Building Rubbish Etc .(Rate Applicable After Deduction Of Void As Per Cpwd/Pwd Norms) Up To 2 Km , Providing Jack Hammer With Compressor Its Lead And Operator For Making Hole In Slab And Breaking R.C.C. And Exposing Existing Reinforcement And J.C.B Machine With Driver/Operator Fuel Hire Etc. Complete. , Providing & Fixing Top Cover Rolling Shutters , Providing & Fixing Ball Bearing For Rolling Shutters. , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 – Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X1.20 Mm M.S. Laths With 1.20 Mm Thick Top Cover. , Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters, Exceeding 10.00 Sqm And Upto 16.80 Sqm In The Area. , Dewatering By Pump Of Capacity 5/7.5 Hp With 4Meter Sump And 50Meter Pipe Length Including Installation, Operator /Helper ,Desiel/ Fuel Etc. As Per Direction Of Engineer In Charge. , Repair Of Rooling Shutter Through Repairing Of All Part Of It Including Required Size M.S. Laths ,Interlocked Together Their Enteir Length And Jointed Together At The End By Locks Mounted On Specially Designed Pipe Shaft With Breackets ,Side Guides And Arrangements For Inside And Out Side Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adeqate Strength Conforming To Is:4454-Part 1 And M.S. Top Cover Of Requierd Thickness For Rolling Shutter. 80X1.20Mm M.S. Laths With 1.20 Mm Thick Top Cover .Including All T&P And Manpower Complete. , Welding By Gas Or Electric Plant Including Transportation Of Plant At Site Etc. Complete. , Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Without Applying A Priming Coat Of Approved Steel Primer All Complete. , Same As Above Item But Material Shall Be Provided By Department To The Contractor Free Of Cost. , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheetfixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I.Limpet And Bitumen Washers Complete. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² , Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6 Mm Angle Iron And 3 Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer.Using M.S. Angels 40X40x6 Mm For Diagonal Braces
Contract Date: Ref. Documents Contract Value : 31.38 Lakh
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
5.
Defence #11344413 Technical Bid
Tender for Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Hard/Dense Soil, Complete All As Specified And Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil Complete All As Specified And Directed. , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Complete All As Specified And Directed. , Excavating In Post Holes Each N Exc 0.5 Cum Getting Out, Returning Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceedings 25Cm Watering And Removing Surplus Soil To Distance N Exc 50 M And Making Good Surface In Hard/Dense Soils Complete All As Specified And Directed. , Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point, Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc 15Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Timber Scantling 40 Sqcm And Over In Section In Any Position Framed Work, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Unframed Work In Fillets, Rails, Posts, Rafters, Purlins Etc Under 40Sqcm In Section, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Boarding Any Description, Fixed With Any Position With Nails, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness Including Nanital Pattern Or Similar Pattern Roof Covering, Complete All As Specified And Directed By Engr-In-Charge. , M&L For Hardcore Of Gauge N Exc. 63 Mm Of Broken Stone Or Boulders, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface, Complete All As Specified And Directed. , M&L For Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Foundation And Filling Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Plain Cement Concrete Type C2, 1:3:6 (40Mm Graded Aggregate) (M-10) As In Foundation , Filling And Mass Concrete And Similar Work , All As Specified And Directed. , M&L Foer Plain Cement Concrete Type B2, 1:2:4 (40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete, Complete All As Specified And Directed. , M&L For Type C1, 1:3:6 (20Mm Graded Aggregate) Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Setting In Mortar, Complete Complete All As Specified And Directed. , M&L For Type B1, 1:2:4 (20Mm Graded Aggregate) Pre-Cast Cement Concrete With Hollow Block Masonry, Exc. 10 Cm In Width And Setting In Cm 1:6, Complete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Flat Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Sup- Ports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Square, Rectangula Or Polygonal Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And Directed By Engr-In-Charge. , M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4.00 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Wall/Ceiling Panelling And Similar Work Complete All As Specified And Directed By Engr-In-Charge. , S&F Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cemtn And Fixing At Sit Eon Pvc Frame As Per Specifications And Drawing, Complete All As Specified And Directed By Engr-In-Charge. , S&F 5Mm Thnick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 125Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Work As Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Complete All As Specified And Directed By Engr-In-Charge. , S&F Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts, If Required Hooks (Stay), Heavy, For Large Gates; Hook And Pintle Hinges: Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps; Hold Fasts; Wall Ties; Hooks For Hanging Fans; Plain Angle Cleats For Securing Purlins To Wood Trusses Or Rafters; Knee Piece Inserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165, Complete All As Specified And Directed. , S&F Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Rolled Mild Steel Plate Girder Or Single Stanchions Built Up Of One Beam Or Channel Section With Flange Plates, Caps, Bases, Splices, Angle Brackets, Cleats And Other Connections Conforming To Fe-290Complete All As Specified And Directed. , S&F For S&F Steel Work In Tubular Trusses Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161 1979 Grade St.-240, Complete All As Specified And Directed. , S&F 0.63Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap,Fixed With Coach Screws And Washers In Roof, Walls Etc With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F 0.80Mm Thick Plain, Galvanised, Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings (Length And Girth As Fixed) With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. , M&L For 6Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work (05 No Of Ply), Complete All As Specified And Directed By Engr-In-Charge. , M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Plain Cement Concrete 1:3:6 Type C2 (40Mm Graded Aggregate) As In Plinth Protection Complete All As Specified And Directed. , M&L For 75Mm Thick Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Sub Base Or Flooring Complete All As Specified And Directed By Engr-In-Charge. , M&L For 100Mm Thick Cement Concrete Type D2, 1:4:8 (40Mm Stone Aggregate) As In Floors Or Sub Base, Complete All As Specified And Directed. , M&L For 25Mm Thick Plain Cement Concrete Type B1 1:2:4 (20Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For 40Mm Thick Plain Cement Concrete Type B-0, 1:2:4 (12.5Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Tiles In Vertical Surface 350X 250X 7Mm/ 450X 350X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick(Square/Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Virified Ceramic Tiles 10 Mm Thick, Light Shade (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 As Backing Coat Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete Complete All As Specified And Directed. , M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. , Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc.Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Alkali Resistance Priming Paint Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Obd Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. , M&L For Preparation Of Old Wooden Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Steel Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Steel Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide, Zinc Crome Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Of Electrical Switch Board Of Any Size/Tube Light/Ceiling Rose/Holder And Refixing After And Over Wall Panelling Complete All As Specified And Directed. , M/L For Point Wiring In Casing Caping With 1.5Sq Mm Frls Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Casing Caping With Its Accessories Pressed Steel Terminal Box Incl 3Mm Thick Isi Marked Laminated Sheet Cover For Fixing Switches/Socket/Regulators Etc For The Following: - One Light/Fan Point Controlled By One No Piano Type Switch 5 Amps Single Pole One Way , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On The Same Board. , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On Independent Board. , All As Per Item No 1 Above But One 3 Pin Socket Out Let 15/16 Amps With Three Nos Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase, Neutral & Earth Continuity Conductor. , S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. , S&F Switch Socket Combination 2 In 1, 3 Pin, 6 And 16 annual periodical maintenance Flush Type Universal , S&F Switch Socket Combination 2 In 1, 6A Flush Type , S&F Ceiling Rose Surface Bakelite 65Mmx50mm 10 Watt Three Terminal. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 8 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , S&F Mcb Spn 32 Amps 240 Volts C Series, 10 Ka, 50 Hz. Make:- As Approved Make Of Db , S&F Mcb Sp 5 To 32 Amps 240 Volts C Series, 10 Ka, 50 Hz Including Connection In The Db And Testing/Commissioning. Make:- As Approved Make Of Db , Supply And Fixing Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. , Supply And Fixing Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete. , Supply And Fixing Led Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 16 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 4 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , S&F Dwc Pipe 63/50Mm Size All As Specified And Directed By Engr-In-Charge. , Material And Labour For Earthing Complete With Galvanized Steel Earth Plate Electrode 600 X 600 X 6 Mm Thick Buried Directly In Ground( Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level) With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level, Connected To Galvanised Earth Lead Wire 4.0Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron Or Steel, All As Shown In Electrical Plate No 3 Of Ssr Pt I Including Necessary Excavation And Earth Work Plain Cement Concrete (1:3:6) Type C-1 With 50 Mm Thick Pre Cast Reinforced Cement Concrete ( 1:2:4) Type B-1 Cover Slab Framed With 50X30x4 Mm Ms Angle (Reinforced With 6 Mm Dia Deformed Bar @ 15 Cm C/C Both Ways And Suitable Handle Of 10 Mm Dia Round Bar) Including Providing Charcoal Or Coke And Magnesium Sulphate In Alternate Layers Of 15 Cm Compacted Thickness All Around The Earth Electrode, With Funnel And 20 Mm Bore Galvanized Iron Watering Pipe (Medium Grade) Wire Mesh, Copper Lugs, Complete In All Respect., Gi Earth Wire Protected By 40 Mm Bore (Light Grade) Galvanized Iron Pipe And Other End Connected To The Earth Bar (Test Point) Made Of Ms Flat (400X32x6 Mm) Bend In ‘D Shape And Fixed To Wall By Means Of Fast Nut Or Bolt Grouted In To Wall At 1 Mtr From Plinth Height. 4Sqmm Pvc Insulated (Colour Green) Copper Conductor Single Run As Earth Continuity Conductor Along With 15 Mm Pvc Conduit Grouted In Wall Or Fixed On Wall Surface To Be Continued Up To Main Switch Board And Fix With Common Earth Dolly As Directed By Eic . Disposal Of Soil To A Distance Not Exceeding 50 Mtr And Necessary Testing On Completion Complete Including Taking Out Old Unserviceable Earthing Materials All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
6.
Defence #11306500 AOC
Tender for Taking Down Cement Plaster On Brick, Concrete Stone Surfaces Etc Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Etc. Complete All As Specified And Directed , M & L 10 Mm Thick Rendering On Cement Mortar 1:6 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed , Material And Labour For 10Mm Thick Rendering In Cement Mortar (1:3) On Brick Or Concrete Surfaces Of Ceiling Finshed Even And Smooth Without Using Extra Cement. Complete All As Specified And Directed , M & L For 15Mm Thick Rendering In Cement Mortar 1:4 On Brick , Concrete And Roof Surface With Wpc @ 200Ml Per 50Kg By Weight Of Cement Finishing The Surfaces Even & Fair, Complete All As Directed.(Wpc Will Be Measured And Paid Separately). , Supply Only Liquid Water Proofing Compound. , Material And Labour For Complete Removal Of Existing Treatment For Old Wall Surface, Including Washing Down And Stopping Of Distempered Surfaces And Applying Two Coat Of Distempered Oil Emulsion Over 1Mm Thick Wall Care Putty All As Specified And Directed. , Material And Labour For 1 Mm Thick Wall Care Putty On Wall All As Specified And Directed. , Material And Labour For Preparation Of Old Painted Steel Surfaces Of Any Description Over 10 Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint All As Specified And Directed. , Material And Labour For Preparation Of Old Previously Treated Plastered Surface Of Ceilings Including Cornices Etc, And Cleaning By Brooming Down And Applying Two Coat Of White Wash On Ceilig All As Specified And Directed. , Material And Labour For Preparation Of Old Distempered Surface Of Walls Including Washing Down And Stopping Of Distempered Surfaces And Applying One Coat Of Distempered Oil Emulsion All As Specified And Directed. , M & L For Preparation Of New External Plasterd Surface Of Wall And Ceiling Apply Of Birla White Putty, Make The Surface Smooth By Rubbing With Emary Paper And Applying Two Coats Of Weather Proof Paint Over A Coat Of Water Thinkable Cement Primer Complete All As Specified And Directed , M & L For Preparation Of Old Plasterd Surface Of Wall And Ceiling Apply Make The Surface Smooth By Rubbing With Emary Paper And Applying One Coats Of Weather Proof Paint Complete All As Specified And Directed , M & L For Preparing New Wooden Surfaces Of Any Description, Not Otherwise Described Over 10 Cm In Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer, Complete All As Specified And Directed. , M&L Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Acrylic Distemper/ Distemper Oil Emulsion (Obd), Over A Coat Of 1Mm Thick Wall Care Putty All As Specified Including Preperation Of Surfaces Complete All As Specified And Directed , M&L Preparing Newly Plastered Surfaces Of Ceilings And Applying Three Coats Of White Wash, Complete All As Specified And Directed. , M&L For Writing Letters Or Figureswith Synthetic Enamel Paint (Block. Roman, Italic Or Indian) N Exc. 30 Cm High,Complete All As Directed. , Dismantling Of Wall And Ceiling Boards Any Type And Thickness Including Cover Fillets, Complete All As Specified And Directed. , Supply And Fix 600Mmx600mmx4mm Thick ‘E Board Classic (Make-Everest Industries Ltd) As In False Ceiling Including Supply And Fixing Gi ‘Tee Grid Frame Work Made Of Special Section Of M.S Galvanized Sheet 0.30Mm Thick , Bottom Portion Painted With Cellular Nitro Painting, Warping The Suspending Wire Around The Existing Wooden/Steel Purlin /Rafter For Suspending Grid Frame Work Of Size 605Mmx605mm Suspended With 4 Mm Dia Gi Wire @ 1200Mm C/C On Main Tee And Fixed To T-Grid With The Help Of Level Clip Or As Per Manufacturer Direction. The Section Consisting Of Main Tee 37Mmx24mmx0.60Mm, Cross Runner Tee 37Mmx24mmx0.60Mm And Perimeter Angle Of 24Mmx24mmx0.50Mm Thick. Perimeter Angle To Be Fixed To Wall With Gi Screw Of 40Mm Long @ 450 Mm C/C Along The Perimeter Of Wall Including Applying Two Coats Of Distemper Oil Emulsion Complete All As Specified And Directed , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), And Rubbish Off From The Site, Complete All As Directed. , M&L For 25 Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20 Mm Graded Stone Aggregate) As In Sub Floor Finishing Cement Concrete Surface Even And Smooth Using Extra Cement Complete All As Specified And Directed , M&L For 15 Mm Thick Screed Bed In Cm 1:4 For Laying Floor Tiles, Complete All As Specified And Directed , M&L For Non-Skid Ceramic Coloured Tiles 7 To 8 Mm Thick (Square/Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding .18 Sqm, In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White/Coloured Cement To Match The Shade, Complete All As Specified And Directed. , M&L For Light Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, Complete All As Specified And Directed. , M&L For Dark Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, Complete All As Specified And Directed. , M&L For Light Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, As In Skirting, Dados And Riser To Steps Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, Complete All As Specified And Directed. , M & L For 10Mm Thick Rendering In Cm 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Rough To Receive Tiles . , M & L For 450X300x7mm Mm Thick Glazed Coloured Ceramic Tiles On Vertical Surface Of Wall Set And Jointed In Neat Cement Slurry And Pointed In White/Coloured Cement To Match The Shade. , Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc And Removal Of Rubbish From Site, Complete All As Specified And Directed.. , M&L18- 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Cooking Platforms In Cm 1:4 Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Including Moulding Of Edged,Complete All As Specified And Directed. , M&L For 20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) For Wall Lining (Veneering To Wall) 12Mm Thick In Cement Mortar (1:3) And Pointing With White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Including Moulding Of Edges If Reqd, Complete All As Specified And Directed. , Demolition Of Precast Cement Concrete Articles And Precast Concrete Block Walling Built In Cement Mortar, Comlpete All As Directed , M&L For Precast Cement Concrete 1:3:6 Type C1 Using 20 Mm Graded Aggregate Block Solid Building Blocks Or Slabs In Not Exc 10Cm Thick (With Plain Or Interlocking Joints As Directed ) Complete Set In Cm 1:4 , Demolition Of Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For, Complete All As Directed. , M&L Mild Steel Tmt Bars 10 Mm Dia., And Over Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips. Complete All As Specified And Directed , Material And Labour For Form Work To Slabs, Chajja With Fair Finish Surfaces Complete All As Specified And Directed. , Material And Labour For Reinforced Cement Concrete Nominal Mix 1:2:4 (Using 20 Mm Graded Crushed Stone Aggregate) Type B1 In Cm 1:6 As In Chajjas, Slabs Work Including Removing Rubbish Off The Premises Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Exceeding 1.50 Sqm But Not Exc 4 Sqm, Complete All As Directed. , Taking Down Shutters Of Any Description Not Exc1.00 Sqm Each,Complete Al As Directed. , S & F Mild Steel Bands, Straps, Clamps, Hold Fasts, Wall Ties And Similar Articles Conforming To Fe-290-O, Complete All As Specified And Directed. , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed , S&F 35 Mm Thick Second Class Hard Wood Plain Framed, Panelled Shutter (Two Panel) With Lock Rail And Panel Of 9 M Bwp Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rails And Stiles As Per Is 1003 ( Part I) Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And Directed , S&F 30 Mm Thick Second Class Hard Wood Glazed And Skelton Shuters , Open Rebated And Prepared To Receive Galss , Gauze , Etc, Divided Into Squares, With Plain , Chamfered Or Rounded Fitted With Cut And Mitred And Rebated Shash Bars Any Numbers Beads For Securing Glass, Etc Sizes Of Members Of Shutters As Speified In Ssr Part I Section 8 , Clause 8.24, Complete All As Specified And Directed. , S&F 30Mm Flush Shutters, Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Side And Both Face Is Covered With Decorative Face Veneer With Lipping/Frame Tp Match All As Completed And Specified As Directed. , S & F For 18Mm Veneered Decorative Plywood, Grade 1 (With Bwr Resin) With Decorative Face Veneers On Both Faces; Fixed With Screws To Timber Frame Work As In Shutters For Kitchen Cabinate/Cupboard Shutters Etc Complete All As Specified And Directed, , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying And Fixing In Opening As Per Specification And Drawing Complete All As Specified And Directed. , S & F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail, Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading And Joined Together With Solvent Cement Supplying & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed. , S & F 100Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S& F Aluminium Anodised Barrel Tower Bolts 150Mm Long Of Extruded Section And Fixed , S & F 150Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S&F Pre Coated Mild Steel Floor Door Stopper ,Tongue Anodized 140Mm Length Including Vulcanised Rubber Piece , Supply And Fix In Repair Toilet Paper Holder Supar Of Brass Chromium Plated Fitted To Wall With Cp/ Brass Screws Of Make - Sona (Code Al 1001 ) Complete All As Specified And Directed , S&F In Repair Harrison Rails( Curtain Rail), Mild Steel,Chromium Plated With Fixing Brackets,Stops,Rollers Etc, Complete All As Sspecified And Directed. , S & F Aluminium Alloy, Anodised, Sliding Door Bolts 250 Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy Complete All As Specified And Directed. , Hacking Out Old Broken Glass (Any Thickness, Size Quality Or Description) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones. , S & F Sheet Glass 3Mm Thick Ordinary Quality And Glazing With Oil Putty/Glazing Clips/Beadings In Squares N Exc 0.50 Sqm In Each Pane. , S & F 3Mm Thick Figured Glass, Pin Head Glazing With Oil Putty/Glazing Clips/Beading In Squares N Exc 0.50 Sqm In Each Pane, Complete All As Specified And Directed. , S&F For 50Mm Dia, Polished, Hard Wood Knobs Fixed With Screws, Complete All As Specified And Directed. , S&F For Continuous (Piano) Hinges, Mild Steel, Bright Finish Or Electro Galvanised, 30 Mm Wide Flap (When Open), Complete All As Specified. , S&F In Repair For Continuous (Piano) Hinges, Mild Steel, Bright Finish Or Electro Galvanised, 30 Mm Wide Flap (When Open), Fixed In Repairs, Complete All As Specified. , Supply And Fixed In Repair 15Mm Angle Valves, Cast Copper Alloy Chromium Plated(Fancy Type), Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed, Complete All As Specified And Directed. , S & F 75Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S & F 100Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S&F For 100 Mm Size Hasp And Staple, Safety Type, Aluminium Anodized With Mild Steel Hinge Pin Including Bolt To Hinge Plate And Fixed With Screws, Complete All As Specified. , S & F In Repair Vitreous China Wash Down Water Closet Pan Of Pedestal Pattern, White With P Or S Traps, Including Connecting To Trap And To Flushing Pipe Etc Complete All As Specified. , Dismantling Of Pvc(Swr),In Any Position And In Any Description Pattern Including All Fittings Etc Complete All As Specified And Directed. , Supply And Fix In Repairs Pvc (Swr) Wc Connector 110Mm Dia With Lip Ring With Rubber Ring Joints Fixed To Walls Complete All As Specified And Directed. , Supply And Fix 110Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints Fixed To Wall Complete All As Specified And Directed. , Supply And Fix 75Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints Fixed To Wall Complete All As Specified And Directed. , Supply And Fix 110Mm Bore Pvc (Swr) Bends Any Radius With Access Door Complete All As Specified And Directed. , Supply And Fix 110Mm Bore Pvc (Swr) Junction Single , (Single T) Equal Or Unequal With Access Door Complete All As Specified And Directed. , Supply And Fix 75Mm Bore Pvc (Swr) Bends Any Radius With Access Door Complete All As Specified And Directed. , Supply And Fix 110Mm Bore Pvc (Swr) Vent Cowl Complete All As Specified And Directed. , S&F In Rep Pvc (Swr) Floor Trap, 75Mm Dia Outlet, Plain With Grating Incl Jointing With Solvent Cement, Complete All As Specified And Directed. , Supply And Fix In Rep 15Mm Bore Galvanised Iron Tube, Medium Grade, With All New Fittings, Fixed To Walls And Ceiling Or Laid In Floor Complete All As Specified And Directed. , Supply And Fix In Rep 20Mm Bore Galvanised Iron Tube, Medium Grade, With All New Fittings, Fixed To Walls And Ceiling Or Laid In Floor Complete All As Specified And Directed. , S&F In Repair 15Mm Brass Cp Wall Mixer For Mixing Hot And Cold Water Screwed Down For Iron Pipe And Fixed In Bath Shower,Wash Basin & Kichen Sink With Complete All As Specified And Directed. , Supply And Fix In Repairs Plate Rack Made Of Stainless Steel 0.50Mm Thick,Over All Size 762Mm(H)X787mm(W)X254mm(D) Complete All As Specified And Directed. , S & F In Repairs Chromium Plated Fancy Type 15Mm Dia Stop Cock, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specifed. , S & F In Repairs Chromium Plated Fancy Type 15Mm Dia Bib Tap, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specifed. , S & F In Repairs Chromium Plated Fancy Type Pillar Taps 15Mm Dia Cast Copper Alloy With Capstan Heads, Screwed Down High Pressure, With Lettered Hot Or Cold With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe And Fixed, Complete All As Specified And Directed , S&F In Repairs Vitreous China Wash Hand Basin White Flat Back Of Size 550Mmx400 Mm Including Cutting For And Pinning In End Of Brackets,32 Mm Waste Fittings,Brass Chromium Plated For Glazed Ware Sinks,Basins Etc.With Long Screwed Shanks And Fly Nuts Flange End Bedded In Red Lead Cement And Other End Fixed.And Flush Pipe Of Polytethylene Of Low Or High Density Or Pvc 32 Mm Dia Complete All As Specified And Directed , S & F In Repairs 10 Ltrs Capacity Pvc Valveless Syphonic Action Type Flushing Cistern Low Level White With Inlet Ball Valve, Float, Chain And Pull And Brackets Etc Complete All As Specified And Directed , S & F In Repair Pvc Connection 15Mm Dia 450 Mm Long With Brass Check Nuts And Washers Complete All As Specified And Directed , S & F In Repair Plastic Water Closet Seat Cover, White Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And Directed , S&F In Repair For Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S&F In Repair Cp Towel Ring Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 90 Gms) , S&F In Repair Soap Dish, Any Type, Fiexd To Plugs With Chromium Plated Brass Screws Complete All As Specified And Directed , S&F In Repair Cp Towel Rail 450Mm Long Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 190 Gms) Complete All As Specified And Directed , Supply And Fix In Repairs, Stainless Steel Wire Cloth, 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed To Steel Frames With Tinned Tacks, Or Galvanized Wire Staples, Or Fixed To Wooden Frames With First Class Hard Wood Bead, Complete All As Specified And Directed. , M&L Welding In Repairs Exc 2.5 Cm But N.Exceeding 2.5Cm In Length (Thickness Of Metal To Be Welded Not Exceeding 6Mm) Including Cleaning Preparing The Surface And Holding The Members In True Position For Maintenance Of Steel Items Such As Gates, Grills, Doors, Windows Etc., Complete All As Specified And As Directed. , Supply And Fix, Clolthes Hook/Hangers Stainless Steel Set Of Five Casted On Strip, Complete All As Specified And Directed. , S &F In Repairs 15Mm Swivel Shower Of Ptmt Any Colour (Minimum Weigth-40Gms) Including 15Mm Shower Arm, 195Mm Long With Bend Of 45 Degree With Flange Of Ptmt Any Colour (Minimum Weight 40Gm) Complete All As Specified And Directed. , Supply And Fixing In Repair Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long, Complete All As Specified And Directed. , S&F In Repairs Of Single Piece European Water Closet White Colour With Soft Seat Cover, 5D Powerful Syphonic Flushing System And Rimless Bowl, Size 67X36x74.5 Cm Complete All As Specified And Directed , S&F In Repair Looking Mirror 600 Mm X 450 Mm Beveled Edge Mirror Of Selected Quality Glass Mounted On 6 Mm Thick Commercial Plywood And Fixed To Wooden Plugs With Steel Screws In Repairs, Complete All As Specified. , S& F For Cabinet Mirror With Plastic / Abs Body With Selve Complete All As Specified And Directed , S & F In Repairs Stainless Steel Sinks With Drainage Board Made Out Of 1.00 Mm Thick Sheet For Kitchen With Plugs, Washers, Waste Pipes, Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cast Iron Cantilever Brackets And Connecting Union To Pipe Overall Size 915 Mm X 460 Mm With Bowl Size 410Mm X 330Mm X 160Mm, With And Including Pvc Waste Pipe And Cp Waste Coupling 32 Mm Dia And Making Good To Disturbed Surfaces, Complete All As Specified. , S&F In Repairs Sinks Made Of Stainless Steel Lmm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X 160Mm, Including Pvc Waste Pipe And Cp Waste Coupling 32 Mm Dia And Making Good To Disturbed Surfaces, Complete All As Specified And Directed. , S&F In Repair 20Mm Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & Highdensity Plastic Ball Screwed For Iron Pipe And Fixed. (Minimum Weight - 20Mm-210Gm)
Contract Date: Jun 17, 2026 Contract Value : 41.47 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Arunachal Pradesh View Result →
7.
Defence #11292278 Technical Bid
Tender for Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/Loose Soil Complete All As Specified And Directed By Engr-In-Charge. , Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, In Any Type Of Soil Complete All As Specified And Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil Complete All As Specified And Directed. , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Complete All As Specified And Directed. , Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Complete All As Specified And Directed By Engr-In-Charge. , M&L For Hardcore Of Gauge N Exc. 63Mm (Of Broken Stone Or Boulders), Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And Directed By Engr-In-Charge. , M&L For Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Foundation And Filling Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Cement Concrete Type C2, 1:3:6 (40Mm Stone Aggregate) As In Walls Or Retaining Walls, Any Thickness, Size Or Shape Including Pilasters, Buttresses Columns, Pillars, Boundary Pillars And Posts (Including Caps And Bases) Complete All As Specified And Directed. , Providing Cement Concrete Type B1 1:2:4 (20Mm Graded Aggregate) As In Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges Complete All As Specified And Directed By Engr-In-Charge. , M&L For Type B1, 1:2:4 (20Mm Graded Aggregate) Pre-Cast Cement Concrete With Hollow Block Masonry, Exc. 10 Cm In Width And Setting In Cm 1:6, Complete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Flat Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Sup- Ports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Square, Rectangular Or Polygonal Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And Directed By Engr-In-Charge. , M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing, Complete All As Specified And Directed By Engr-In-Charge. , S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 125Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S &F Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Complete All As Specified And Directed. , S&F Framed Work Such As Grills, Gratings, Etc. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.Gde-E-165 Complete All As Specified And Directed By Engr-In-Charge. , S & F Ms Screw Bolt(Machine Made) With Hexagonal Or Squre Heads At One End And Screwed The Other Or Screwed Both Ends And Dia Of Bolt 11 To 15 Mm And Length Exc 10Cm N Exc 15 Cm Long Complete All As Specified And Directed. , S&F Mild Steel Round Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping Forcolumns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips For Chain Link Fencing Complete All As Specified And Directed. , Taking Down Of Electrical Switch Board Of Any Size/Tube Light/Ceiling Rose/Holder And Refixing After And Over Wall Panelling Complete All As Specified And Directed. , S&F Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Rolled Mild Steel Work As In Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Complete All As Specified And Directed. , Fixing Only Chain Link Fencing Including Line Wires, Any Mesh, Size And Type To Any Type Of Standards, Rails, Straining Bolts, Etc. Including Provission Of Binding Wire, Complete All As Specified And Directed. , S & F Galvanised. 2 Strand, Steel Barbed Wire 2.24Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacings And Straining And Fixing To Any Type Of Standard Rails Straining Bolts, Including, Securing Or Tying At Crossings With And Provision Of Galvanised Mild Steel Wire, Staples Or Steel Pins, Etc. As Directed (Each Line Wire To Be Measured) Complete All As Specified. , Supply Only Chain Link Fencing Mesh Size Of 100 X 100 Mm Of 4Mm Dia Galvanised Wire Complete All As Specified And Directed. , S&F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering /Cladding To Wall, Fixed With Self Tapping Screws As Specified Complete All As Specified And Directed. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified Complete All As Specified And Directed. , M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. , M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Plain Cement Concrete 1:3:6 Type C2 (40Mm Graded Aggregate) As In Plinth Protection Complete All As Specified And Directed. , M&L For 100Mm Thick Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) In Sub Base Or Floors, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Cement Concrete Type D2, 1:4:8 (40Mm Graded Aggregate) As In Sub Base Or In Floors Complete All As Specified And Directed By Engr-In-Charge. , M&L For 25Mm Thick Cement Concrete Type B0, 1:2:4 (12.5Mm Graded Aggregate) As In Floors Complete All As Specified And Directed By Engr-In-Charge. , M&L For Chequered Cement Concrete Tiles 20Cm X 20Cm X 25Mm Thick, Set, Jointed And Pointed In Neat Cement Slurry In Floors With Grey Cement And Pigment Complete All As Specified And Directed By Engr-In-Charge. , M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete All As Specified And Directed. , M&L For 20Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 For Laying Floor Finishes Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Obd Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of New Steel Urfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Crome Complete All As Specified And Directed. , Preparation Of New Steel Surfaces Of Any Description, N.Exc10cm In Width Or Girth When Unconnected With Other Painting Or When Painted In Adifferent Tint And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Crome Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
8.
Public Administrative Department #11290947 Technical Bid
Tender for Cartage Of Malva, Silt, Sludge Kankar And Other Disposable Organic Material Etc. All Complete With Labour T&P Including Cartage Of 8 Km. (Chapter No.3 Si.No.8) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (1 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (2 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (3 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Earth Work In Filling In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 8Km. Form The Foundation Trenches Including Royalty@ 9.00 Per Cum. (Chapter No.4 Pwd.Sch.-253(A)+ Cptr No. 3 1 To 8 Km.) , Earth Work In Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Earth Work In Excavation In Foundation In Ordinary Soil Mixed With Moorum Shingle Kankar Requiring The Use Of Special Tools And Plants Such A Pick Axes Subbals Etc. Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Extra For Earth Work In Embankment Mechanically Compacted To 98% Proctor Density Ln Ordinary Soil, Excavation To Be Done Form Of Regular Pits Not Exceeding 0.5Mtr In Depth And Work In Embankment To Be In 20Cm Layer Including Ramming And Dressing Pulverization Surfacing Including Supply Of Labour, T&P, Roller And Water Sprinkle , Back Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50M And Lift Upto 1.5 M Incl. Cost Of All Labor Complete As Per Specifications , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 1.50M To 3M. , Supply & Fixing 3.5Kg And Or As Specified By The Manufacture, Harderner In Trexim Concrete Per Sqm. , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 3.00M To 4.50M. , Cleaning Jungles Including Uprooting Of Trunk Vegetation Grass, Bushes, Wood Trees And Sapling Of Girth Upto 30Cm Measured At A Height Of 1 Meter Above Ground Level And Removal Of Rubbish Upto A Distance Of 50 Meters Out Side The Periphery Of Area Cleared. , Removal Of Silt For Nala/Nali In Liquid Mud Or Faul Position With Special T&P Including Lead 30M And Lift Up To 3.00M Etc. All Complete. (As Per Attached Sanctioned Rate Analysis) , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 4.50M To 6.00M. , Earth Work In Cutting Or In Embankment In Ordinary Soil Excavation To Be In The Form Of A Regular Pits Not Exceeding 0.50M In Depth And Earth Work In Embankment To Be In 20Cm Layers Including Ramming And Dressing The Surface To Required Lavels And Slops And Also Including 1.5 M Lift And 30 M Lead. The Earth In Form Of Cutting (B) To Be Used As Spoil Banks Within 50M Distance As Directed By The Engineer-In-Charge Etc. All Complete. (4-Chapter Si.No.3) , Sand Filling In Plinth Including Supply Of Necessary Quality Of Local Sand From A Distance Not Exceeding 8 Kms From The Site Of Work And Including Watering Dressing Etc.Required For Proper Completion Of Work (Chapter No.4 Si.No.6 ) , Providing And Laying Cement Concrete In 1:5:10 (1 Cement :5 Fine Sand 10 Stone Ballast 40 Mm Gauges) And Curing Complete, Including Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.1) , Providing And Laying Cement Concrete In 1:4:8 (1 Cement:4 Coarse Sand :8 Graded Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors (5-Chapter Sr.No.2) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand :6 Gladed Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.3) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand:6 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors. (5-Chapter Sr.No.5) , Providing And Laying Cement Concrete In 1:2:4 (1 Cement: 2 Coarse Sand :4 Graded Stone Aggregate 40 Mm Noffrinal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors..(5-Chapter Sr.No.6 Si.No..4.1.3) , Providing And Laying Cement Concrete In 1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors. (5-Chapter Sr.No.7) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement -All Work Up To Plinth Level: 1:2:4 (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete , Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Up To Plinth Leuel:1:2:4 In Raft Foundation (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Trp To Plinth Level : 1:1.5:3 (1 Cement:1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) Ch-S Si No- 5,1.2 , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete,Slab Including The Cost Of Centering, Shutterang, Finishing And Excluding Reinforcement - Above Plinth Level Upto Fifth Floor Lable : 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Above Plinth Level Upto Fifth (V) Floor Lable , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Balconies, Shelves, Chajjas, Bands, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Including The Cost Of Centering, Shuttering, Finishing Exlcuding Reinforcement, With 1:1.5:3 In Heavier Beam (1 Cement: 1.5 Coarse Sand(Zone-Lll) : 3 Graded Stone). , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Work Up To Plinth Level (5-Chapter S.I. No.-16) , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Works Above Plinth Level Upto Floor V Level (5-Chapter S.I. No.-16) , Class-150 (Non Modular) Brick Work In 1:6 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.. ( Chapter No. 06 Sr.No. 1) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Foundation And Plinth Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapter No. 06 Sr.No. 2) , Class-150 (Non Modular) Brick Work In 1 :4 Cement And Fine Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Only 80Mm Thick Wall). (Chapter No. 06 Sr.No.3) , Class-150 (Non Modula0 Brick Work In L:3 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Chapter No. 06 Sr.No.4) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. (Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand Mortor In Super Structure Above Plinth Level Upto Floor Five Level For Wall Thickness More Than 12Cm. Including Supply Of All Material, Labour And Tools And Plants Etc. All Complete. {Chapter No.6 Si.No.2+6} , Add Extra To Ltem No. 1 To 4 Above For Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 12Cm And Less. (Chapte No. 06 S.I. No. 2+4) , Add Extra To Ltem No. 1 To 4 Above But In Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 8Cm And Below. (Chapte No. 06 S.I. No. 2+4) , Providing And Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.1} , Providing And Laying Damp-Proof Course 25 Mm Thick With Cement Concrete 1:2.4 (1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.2} , Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Vg-10 Of Approved Quality Using 1.7K9 Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With Piece Of Cloth Lightly Soaked In Kerosene Oil.. {Chapter No.07 Si.No.3} , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (A) 35Mm Thick. (Chapter No.9 Si.No.1-9.21.1) , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (2) 30Mm Thick. (Chapter No.9 Si.No.1-9.21.2) , Providing & Fixing 1.00 Mm Thick Decorative High Pressure Laminated Sheet Of Plain/Wood Grain In Gloss/Matt/Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Uality Conforming To Is : 2046 Type S, Including Cost Of Aadhesive Of Approved Quality. , Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styless And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shal Be Flat And 20 Mm Shalll Be Tapered In 45 Degree Angle On Both Sides Forming Styless And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail And Lock Rails Shall Be Top, Bottom And Lock Rails Shall Be Provided Both Sides Of The Panel. 10 Mm (5 Mm X 2) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gap Insert For Top Rail & Bottom Rail. Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded/Sealed To The Styles & Rails With 7 Mm (5 Mm + 2 Mm) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interrior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacturers Specification & Drawing.30 Mm Thick Pre Laminated Pvc Door Shutters , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Ls: 1868, Minimum Anodic Coating Of Grade Ac 15) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 5.5 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 8.0 Mm Thickness , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315 , Having Brand Logo Embossed On The Body/ Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors ,Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor . Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Entineer-In-Charge. With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness. , Providing And Tixing Factory Made Upvc White Colour Casement/ Casement Cum Frxed Glazed Door Comprising Of Upvc Multi-L Chambered Frame. Sash And Mullion (Where Ever Required) Extrlcled Profiles Dl,Ly Reinforced With 1.60 T 0 2 Mm Thick I Galvalized Mild Steel Section Made From Roll Forming Process Of Iequrred Length {Shape & Size According To Upvc Profile), I Ldvc Extruded Glazing Beads Of Appropriate Dimension. Epdi\/L Gasket. Znc Alloy (White Powder Coated) 3D Hrnges And One Handle On Each Side Of Panels Along With Zinc Plated Mild Steel Rnulti Point Locking Having Transmission Gear, Cylinder With Keeps And One Sicle Key, G.L Fasteners 100 X I Mm Size For Fixing Frame To Finished Wall And Necessary Stainless Steel Screws Etc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusion Weldecl Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. Afier Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approvecl Quality, All Complete As Per Approved Drawing & Cllrection Of Engineer-In-Charge. (Single I Double Glass Panes And Sllicon Sealent Shall Be Paid Separately) Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerance In Dlrnension I.E. In Depth & Width Of Profile Shall Be Acceptable Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. Casement Door With 3D Hinges Made Of (Big Series) Frame 67 X 64 Rm & Sasn 67 X 1 10 Mm Both Having Wall Thickness Of 2.3 I 0.2 ^Rr Ancl Single Glazing Bead / Double Glazing Bead Of Lappopiate D.Mersion. (Area Of Door Upto L2 00 Sqm). , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Structural Steel Work In Single Section, Fixed With Or Withoul Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required Heavy Size Such As Trusses Built , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Apptying A Priming Coat Of Approved Steel Primer.(Chapter No.10 Si.No.4-10.3) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pjpe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\4.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover (Upto 10.00 Sqm).(Chapter No.10 Si.No.4-10.5) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\Il.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X,1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters. Exceeding 10.00 Sqm And Upto 16.80 Sqm/Above In The Area , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc, Complete. Hot Finished Welded Type Tubes , Supply And Fixing Stainless Steel (Grade 304) Ralling Made Of Hollow Tubes, Channels, Plates Etc. Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Steel Nuts And Bolts Complete. I/C Fixing The Ralling With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts Fasteners Etc.). (Chapter No.10 Si. No. 14 New) , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1 .4 Mm Aperture On Both Sides , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Stainless Steel (Grade 304) Wire Gauze Of 0.5 Mm Dia Wire And 1.4 Mm Aperture On Both Sides , Painting Top Of Roofs With Bitumen Of Approved Quality @ 17Kg Per 10 Sqm Impregasted With A Cost Of Coarse Sand At 60 Codm Per 10 Sgm, Including Cleaning The Slab Surface With Keroseme Oil Complete : With Residual Type Petroleum Bitmen Of Grade Vg-10 , Providing And Laying Integral Cement Based Water Proofing Itreatment Including Preparation Of Surface As Required For Itreatment Of Roofs, Balconies, Terraces Etc Consisting Of Lfollowing Operations: (A) Applying A Slurry Coat Of Neat Cement Lusing 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Lcompound Conforming To Ls. 2645 And Approved By I E Ng Ineer-In-Charge Over The Reinforced Cement Concrete Slab Including Adjoining Walls Lupto 300 Mm Height Including Cleaning The Surface Before Llreatment. B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 125 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 L Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Ofjunctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Lb : 2645 And Approved By Engineer-In-Charge (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix L:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Includlng Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finjshing The Surface With Lrowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge :Wth Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65Mm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm/Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 80 Mm Thick With Zinc Coating Not Less Than 275 Gm/ Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/ M , Providing And Laying Six Courses Water Proofing Teatment With Bitumen Felt Over, Roofs Consisting Of First, Third And Llfth Course Of Blown Bitumen 85/25 Or 9O/15 Conforming To Ls : 702 Applied Hot @ 1.45, L.2O And 1.45 Kg Per Square Metre Of Area Respitively, Second And Fourth Courses Of Roofing Felt Lype 3 Grade I Conforming To Ls : 1322 (Hessian Based Self Flnished ;Itumen Felt) , Sixth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Decimeter Per Sqm Iniluding Preparation Of Surface But Excluding Grading, Complete. , 10 Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa @ 35 Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Flat Tile Bricks, Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finished Neat: With Common Burnt Clay F.P.S.(Non Modular) Brick Tile Of Class Designation 10 , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineerin-Charge) 0 50 Mm (+ 0.05 %) Total Coated Hickness With Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Icrons Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge, The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roollng Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Ridges Plain (500 - 600Mm) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Ls: 12823 Grade Ltype Ll, In Anelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing 12 Mm Thick Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. I\4Arine Plywood Conforming To Ls: 710 , Providing And Fixing Tiled False Ceiling Of Specilled Materials Of Size 595X595 Mm In Lrue Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanlzed @ 120 Grams/ Sqtn, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel Lo Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Iight Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gl Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gl Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T- Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Gl Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G Lsheet Having Galvanizing Of 100 Gms/Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending , Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595mm Of Approved Texture, Design And Patterns Having Nrc (Noise Reduction Coefficient) Of 0.50 (Minimum) As Per Ls 8225:1987, Light Reflectance Of 85%(Minimum). Non Combustible As Per Bs:476 (Part-4), Fire Performance As Per Bsi476 (Part 6 &7), Humidity Resistance Of 100%, Thermal Conductivity 0.043 W/M K As Per Astm 518:1991,In True Horizontal Level Suspended On Inter- Locking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 24X38 Mm Of Length 3000 Mm, Cross - T Of Size 24X32 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 24X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, I Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Ol Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 460 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-Incharge. With 15 Mm Thick Tegular Edged Light Weight Calcium Silicate False Ceiling Tiles. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:6 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of 1:4 Cement & Fine Sand (Not Less Than In 1.25 Fm) Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:3 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:4 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 20 Mm Cement Plaster 1:3 (L Cement:3 Coarse Sand) Linished With A Floating Coat Of Neat Cement. , 20Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding Bomm. Ln Girth And Finished Even And Smooth , 6Mm Thick Celling Plaster 1:3 (1 Cement :3 Fine Sand) Cement & Fine Sand In F.M Not Less Than 1.25, 1:3 Including Chipping Of Reinforced Cement Concrete Surface Before Celing Plaster. The Cost Of Including At Material, Labor T&P And Scafolding Etc Complete. (Chapter No.13 Si.No.13) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Morlar1:4 (1 Cement: 4 Coarse Sand) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Including 50Mm Thick Base With Concrete 1:4Rb Complete As Per E/L , Marble Tiles Stone Slabs 18 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With : Marble White Dhungriquality , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With: White Alebeta White Stone , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1: 4 (1 Cement: 4 Coarse Sand) : 25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Moftar 1:5 (L Cement: 5 Coarse Sand)With Joints Finished Flush.Red Sand Stone , Prividing & Laying Ceramic Non Skid Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming Tq Ls : 15622 Of Approved Make In Colours Such As White, Lvory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Ioints With White Cement And Matching Pigment Etc., Complete. , Providing & Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Ls : 15622 (Thickness To Be Specified By The Manufacturer )Of Approved Make In Atl Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-Incharge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Morta|L:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 33Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Vitrified Tiles 500X500mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providing And Laying Vitrified Tiles 600X600mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providlng And Laying Polished Granite Jet Black Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge.{Chapter No.14 Si.No.27} , Stone Work (Machine Cut Edges) For Wall Llning Etc. (Veneer Work) Upto10 Metre Height, Backing Filled With A Grout Of Avercge 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Polnting In White Cement Mortar 1:2 (1 White Cement R 2 Stone Dust) Wlth An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Plns Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Flne Dressed With Rough Backing. 30 Mm Thick , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. Including Curing The Cost Of All Material, Labour, T&P Etc. Complete. (Chapter No.15 Si.No.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Ofwork. , Finishing Walls With Water Proofing Cement Paint Of Required Shade : New Work (Two Or More Coats Applied @ 3.84 Kg/10 Sqm) Supply Of All Labour Material And T&P Requlred For Proper Completion Of Work. , Finishing Walls With Textured Exterior Paint Of Required Shade New Work (Two Or More Coats Applied @ 328 Ll Lo Sqm) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20K9/10 Sqm Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade ; New Work (Two Or More Coat Applied @ 1.67 Llth) Sqm Over And Including Priming Coat Ofexterior Primer Applied @ 2 20 Kg/10 Sqm) Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/L0 Sqm Over An Under Coat Of Primer Applled @ O.B0 Ltr/10 Sqm Of Approved Brand And Manufacture. Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacturb Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Paint Of The Two Coat Over Primer Coat Wood Surface And Etc. All Complete.(15-Chapter Si.No.8+10+11) , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Upto 10 Cm In Width , Applying Priming Coat: With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood) Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Of Work , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade Two Or More Coats On New Work Includlng Cost Of All Materials, Labour T&P Etc. Required For Proper Completion Of Work Wood And Steel , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..One Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..Two Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Sudace Smooth Including Necessary Repairs To Scratches Etc. Complete. , Distempering With Lst Quality Acrylic Distember (Ready Mix) Having Voc Content Less Than 50 Grams/ Litre Of Approved Brand And Manufacture To Give An Even Shade:Old Work (One Or More Coats) , White Washing Wth Lime On Undecorated Wall Surface (One Coat) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , White Washing Wth Lime On Undecorated Wall Surface (Three Or More Coats) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , Colour Washing Such As Green, Blue And Other Coloures Or Buff To Give An Even Shade New Work Colour Washing (Two Coats) With A Base Coat Of White Washing With Limes Including Cost Of All T&P Other Complete Work. , Removing White Or Colour Wash By Scrapping And Sand Papering And Pteparing The Surface Smooth Including Necessary Repairs To Scratches Etc Complete , Demolishing Cement Concrete Manually Including Disposal Of Materialwithin 50 Metres Lead , Dismantling Reinforced Cement Concrete Or Reinforced Brick Work Including Stacking Of Materials As Directed By E/Ic With In A Distance Of 60 Meters (200 Feet). (17-Chapter Pwd. No.694) , Demolishing R.B. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-Incharqe. , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge In Cement Mortar. (17-Chapter Si.No.6) , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Eng;Neer-In-Charge : Ln Lime Mortar , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead Of Area 3 Sq. Metres And Below , Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: R.S. Joists , Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. (17-Chapter Si.No.16) , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Wlthin 50 Metres Lead. , Dismantling Of Old Interlocking Tiles Pavement Including Staking Of Serviceable Material And Disposal Of Unserviceable Material Within Lead Of 50M As Per Direction Of Engineer In Charge. (Ns) , Random Rubble Masonry 1:6 (1 Cement: 6 Coarse Sand), With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size).Upto Plinth Level With , Random Rubble Masonry 1:6 (1 Cement : 6 Coarse Sand), With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (L Cement:6 Coarse Sand:12 Graded Stone Aggregaie 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like , 30 Mm Red Sand Stone Sun-Shade (Chisel-Dressed) Supported On Red Sand Stone Brackets, Fixed In Walls With Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Finishing Complete. , Providing And Fixing Red Sand Stone Jali 40 Mm Thick Throughout In Cement Mortar 1R3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc , Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 30 Mm Thick (Chapter No.18 Si.No.7) , Supply And Fixing 500 Liter Pvc. Sintex Water Tank Etc. All Complete. (19-Chapter Sr.No.2(C)) , Laying Brick Soling Layer On Prepared Sub-Grade With Brick On End Edging According To Lines, Graded And Cross-Section Shown On The Drawing Filling Joints With Sand And Earth, Spreading 25 Mm Thick Layer Of Earth Over Brick Soling, Watering And Rolliing The Same With Three Wheel Road Roller 80-100 Kn As Per Technical Specification Clause 412 , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Constuction Of Un-Reinforced, Plain Cement Concrete Avement Thickness As Per Disign, Over A Prepared Sub Base With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M-30 (Grade), Coarse And Fine Aggregate Conforming To Is 383, Maximum Size Of Coarse Aggregate Not Exeeding 25Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Acapacity And Apporopriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork (Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film Wedges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continous Aperation Including Provision Of Contraction, Expansion, Construction And Constructionl Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14 Days, Curing Comound (Where Apecified) And Water Finishing To Lines And Grade As Per Drawing And Technical And Technical Sepcification Clause 1501. (For Agra). (Chapter No.20 Si.No.12) , Construction Of Un-Reinforced, Plain Cement Concrete Pavement Over A Prepared Sub Base With Approve Grade Cement @ 400 Kg Per Cum, Coarse And Fine Aggregate Conforming To Ls 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed Form Or Slip Form Paver, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Prim Er, Joint Sealant, Debonding Strip, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades As Per Drawing For Agra , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work.80 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Coloured) , Re-Laying Of I Shaped Precast Interlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50Kg) Including 25Mm Thick Loacal Sand Base Levelling And Ressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Comlete Work. Including Vat (Chapter No.20 Si.No.19 New Item) , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe. (Lnternal Work - Exposed On Wall) 32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 40Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 50Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 15 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 20 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 25 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 32 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 40 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 62.50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 75 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 100 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 150 Mm Nonrinal Dia Pipes , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 15 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 20 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 25 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 32 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 40 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 50 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 15 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 20 Mm Dia Nominal Bore , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 60X60x75 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 90X90x100 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 120X120x100 Cm Lnside , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Ls : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Lsl Marked White Solid Plastic Seat And Lid , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Two Urinal Basins With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Three Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Four Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require: (White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C. P. Brass Pillar Taps) {Chapter No.24 Si.No.5A} , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Tap , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pajr Of 15 Mm C.P. Brass Pillar Taps , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C.P. Brass Pillartap , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.6A) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pi Pe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Ls:2556, C.L. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittlngs And Cutting And Making Good The Walls And Floors Wherever Requlred:Range Of Two Half Stall Urinals With 5 Litre Pvc. Automatic Flushing Cistern , Constructing Brick Masonary Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 455X610mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (A) Inside Dimensions 455X610mm And 45Cm Deep For Single Pipe Line : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.6A) , Constructing Brick Massonry Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 600X850mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (C) Inside Dimensions 600X850mm And 45Cm Deep For Pipe Line With Three Or More Inlets : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.8C) , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) Hindi Letters , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) English Letters , Reinforced Cement Concrete M15 Grade Boundary Pillars/ Wheel Guard Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.2 Metre High , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.8 Metre High , Deduction Of Cost Brick/Bats. (Chapter No.1 Sr.No.2(C)) , Deduction Cost Of Material Old Workable Bricks Etc. All Complete. , Road Delinator Delinealor Supply & Fixing Of M S Delineator Made Of L\Lild Steel With Pllre Polyester Powder Coating With The Minimum Thickness Of Powder Coating Of Not Less Than 40 Micron For Prolectlon Against Corlosion The Surface Should Be Concealed So That There Sholrld Not Be Any Exposed Surface Wilhout Powder Coating. Alternatively, These Metal Guide Poles Can Be Concealed With Thermoplastic Body. The Posts Shall Have Lan Ellipsoidal Or Circular Design Wilh The Height Of The Pole Shall Be 800 To 900 Mm Above The Ground With About 200 To 300 Mm Base Which Can Be Anchored Onto The Ground Mild Steel Guide Poles Shall Conform To Type Xl Sheeting Specifications As Per Lrc67 And Ast Ii D4956 Which Would Ensure To Obtainl Clear Visibility Of The Road Alignment During Nighl Time. The Relro Reflective Sheeting Shall Be Tested For Acertificale Of Having The Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Iiner Removal, Adhesion,Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdooa Weathering And Ils Having Passed These Tests Shall Be Obta Ned From Lnlernational/Government Laboratory / Lnslitute By The Manufacturer Of The Sheeinq And In Case The Cerliflcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condillon Within 3 Years Of Launching Of Product By The Manufaclure In Abroad. Alternatively, A Certillcate Conforming To Astlvl Specification (D4956 09) On Adficial Accelerated Weatherlng Requirements From A Reputed Laboratory In Lndia Can Be Accepted providing Sionally. Ln Such A Siluation, The Employer / Clienl, If So Desires, Collld Seek For A Performance Guarantee Which Would Be Released Alter Receipt Of Certiflcate Meeting The Requ Rement Of Three Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Report Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour. T&P, Transportation, Installation And Incidentals All Complete As Per D Recllon Of The Engineerincharge , Road Marking With Hot Applied Thermoplastic Compound With Reflectrosing Glass Beads On Bituminous Surface. Providing & Laying Of Hot Applied Thermoplastic Compound 2.5Mm Thick Including Reflecto Rising Glass Beads @ 250Gm/Sqm. Area, Thickness Of 2.5Mm Is Exclusive Of Surface Applied Glass, Beads As Per I.R.C. 35. The Finish Surface To Be Level Uniform And Free Form Steaks And Holes Composition Of Thermoplastic Material Shall Be As Per Table 800-3 Of Clause 803 Of Morth Including Cost Of Work As Per Direction E/Ic. (Chapter-28 Si.No.2) , Road Marking With Hot Appliod Ths.Moplastic Compound With Roflsctorlsing Glass Boads On Bituminous Surface. (Ropoated / Tranvers Bar) Providing And Laying Of Hot Applied Thermoplastic Compound 5 Mm Thick Lncludlng Reflectorising Glass Beads 0) 5Oo Gms Per Sqm Area, Thickness Of 5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35-2015 The Llnished Surface To Be Level, Uniform And Free From Streaks And Holes , 6M Span Over Head Cantilever Structure With 300 Dia M S One Vertical Post Supply, Fxing & Erection Of Built Up Canllever Structure 6 M Span Comprising Of One Verllcal Posts Of 6.00 I!4 Helght Made Up Of 300 Mm Nb Heavy Class Ms Pipe As Verllcal Member Welded With 10 Mm I\,4S Plate At Top & 12 Mm M S Plate At Bottom. The Horizontal Truss Shall Comprise Of 50 Mm Dia Heavy Class M.S. Pipe And 40 Mm Dia Heavy M S Pipe As Bracing & 10 Mm Ms Plate At Bottom For Llxing To Vertical Post As Per Structure Design & Drawing Wilh One Of Steel Primer And Two Coats Of Synthetic Enamel Planl. The Work Includes Constrlrction Of Reinforced Cement Concrete Foundation Of Size 0.90X0.90X1 50 M Of Required Depth As Per Site Conditlon For Built Up Structure Including Earlh Work In Excavation 100 Mm Thick Lean Concrete In 113:6 Cement Coarse Sand And 40 Mm Gauge Stone Ballast And Reinforced Cement Concrete M25 Grade Concrete Including Supply And Fixing Of 25 Mm Dia Foundalion Bolts 600 Mm Long As Per Provision Of Structure Design Includlng Cost Of Reinforcemenl & Shuttering. The Lateral Vertical Clearances And Complete. Nstallaton Work Shall Be As Per Relevanl Clauses Of Mort&H Speciflcation Section 8Oo And Irc 67 2012 Complete In All Respect The Raies Shall Include Cost Of Deslgn Fabricalion, Supply, Kansportalion, Local Shifting Erection Of Signage Skucture Using Crane, Inclusive Of All Taxes Etc. All T&P Machine, Malerial And Labour Requiled For Proper Completion Of Work As Per Direclion Of Engineer-Ln-Charge. , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilhout Shank) , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilh Shank) , Flexible Median Marksr As Per Irc 79:2019: Flexible Lmedian N4arker (Flv4nl) Should Be Used For Improving Medlan Visib Lity Dlrring Dark Hours. , Use Of L/Edian ]Varker Provides Safely Againsl Colision Happening Wilh Med Ans During N Ght Lime , Or Sevete Weather Flexib E L\.4Edian Markers Shall Be Provided With Fluorescenl Yellow Colour Retro-Refleci Ve Sheeting Type Xl As Per Irc:87. Flexible Lt4edian Lmarker Shall Be Ol Lough, High Impact Resistant, Lnieclion Molded, Lhermoplastic Body With Propery Of Flexibility Io Provide High Durabilityand U Shape Structure Having Rebound / Bollnce Back Properly. The Sheeting Shall Be Of Type Xl Conforming To Lrcl67 And Ii Should Be On Both The Faces Whereby Providing Maximum Refleclivity At L,Anger Distances With Adequate Durabllity. The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body During The Lnjection Molding Process. Fi\4M Shall Be Fixed By A Combination Bf Epoxy Adhesive And Grouting/ Drilling On Concrete Medians Or Property Conslructed Solid Medians Heighl: The Marker Height Shall Be A Minimum Of 180 Mm Width 120 Mm & Body Thickness: 6.5 Mm. The Shanks Shall Not Be Less Lhan 20 Mm And Depth Shall Not Be Less Than 30 Mm Reflective Area: Shall Not Be Less Than G0 Cm Square . Proof Of Lhe Same Report Shall Be Uploaded Which Quollng Lender. The Body Of Fn,4[,4 Shall Bounce Back To Ils Origlnal Position Of Afier 750 Number Of Hits Using Pendulum Of 1.8 Kg Conforming 40 Astm D256 Adhesion Between The Body And Outer Casing Body Of Fmi\4 Shall With Stand 50 Kg I Tensile Loads Conforming To Astm D63b Method. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer-Ln-Charge. , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Over 10 Cm. In Width , Linear Dstinoator Systsm (Lds) Supply & Fixing Of Linear Delineator System (Lds) Panels Made Of Micro Prismatic Retro Reflective Sheeting Type Xl Duly Laminated On Thin Aluminium Foil To A Unique Corrugated Shape To Provide Retro Reflection Across Wide Range Of Observaiions And External Angles. Eatch Lds Panel Should Be Of Nominal Lenglh Of 33 Inch And Each Ridge Shall Be Approximately 0.34 Inch High Each Lds Panel Is To Be Firmly Fixed On Existing Concrete/Brick Work With 16 Nos Fastner/ Screw , Retro-Roflectivesheeting Type-Lv With 4 Mm Thick Acm Single Side Providing & Flxing Of Reflective Signs With A Corrosion Resistant 4 Mm Thick Wlth 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Lace To Be Iully Covered With Hlgh Lntenslty Prlsmatic Sheetlng Type Lv As Per Irc-6712012 Relro Refleclive Sheeling With Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Elc Shollld Be As Per Morth Speciflcation No Bo1.3.7 .The Sheelng Shall Have A Pressure - Sensltive Adhesive Of The Aggressive - Tack Type Requiring No Heat , Solvent Other Preparation For Adhesion 10 A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acim (Aluminium Composite Materials) Shall Be Flxed On The Back Frame Nis Angle Wiih Riveting. Micro Prismalic Type Lv Retro Rellective Sheeting Conilrming 1O Astm 04956-09 Shall Be Pressure Lixed. The Retro Reflective Sheeting Shall Be Tested For A Cerlillcate Of Having The Sheeting Tesled For Coetllcient Of Retro Refleclion, Dayume Colour And Luminance, Shrinkage, Flexibilily, Liner Iemoval, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed Lhese Lesls Shall Be Obtained From Lnlemational/Government Laboratory/ Lnstitute By The Manufacture. Of The Sheetng And In Case The Certiflcate Is Oblalned From International Condilion, T Should Also Be Obtained From Lndian Condilion Within 3 Years Of Launching Of Producl By The Manufactllre In Abroad. Alternalively, A Cerliilcate Conforming To Astm Specification (D 4956-09) On Artiilcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, Lhe Employer/Client, If So Desires, Could Seek For A Petlotrnance Guarantee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirement Of Lhree Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo.T Shall Be Uploaded Whlch Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Lransportation, Installation And Lncidentals All Complete As Per Direction Of The Eng Neer-In-Charge. , Retro-Reflectivesheeting Type Iv With 4 Mm Thjck Acm Double Side: Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Lhlck With 0.4 To 0.5 Mm Both Side Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Tntensity Prismaiic Sheeling Type Lv As Per Irc-67:2012 Retro Reflective Sheeting With Back Frame Ms Angle Of 35X35x5 Mm Legends Letters , Numerals And Borders Elc Should Be As Per Morth Specification No801.3.7 The Sheeting Shall Have A Pressure - Sensitive Adhesive Of The Aggressive - Tack Type Requiring No Heai, Solvent Olher Preparation For Adhesion To A Smooth Clean Surface, Ln A Manner Recommended By The Sheeling Manufacturer. The Acn,4 (Aluminium Cornposite L\,4Aterials) Shall Be Ilxed On The Back Frame Ms Angle With Nveling. Micro Prismatic Type Lv Retro Refleclive Sheeting Conflrming Io Astm D4956-09 Shall Be Pressure Llxed. The Reko Reflective Sheeling Shall Be Tesled For A Cedificate Of Having The Sheeting Tested For Coemcient Oi Reko Reflection, Daytime Colour And Luminance, Shrinkage Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdoor Weatherlng And Its Having Passed These Tests Shall Be Obtained From Lnternallonal/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeting And In Case The Certificale Is Oblained From International Condition It Should Also Be Obta Ned From Lndian Condilion Wilhin 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certilicate Conforming 10 Astm Speciflcatlon (0 4958-09) On Aatiflclal Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepled Provisionally. Ln Sllch A Situation, The Employer/Client If So Desires, Could Seek For A Performance Guarantee Which Would Be Released Afler Receipl Of Cerlillcate Meeting The Requirement Of Lhree Years Outdoor Weathering Of The Sheeling As Per Irc 67I2012 & Proof Of The Same Repofl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installalion And Incidentals All Cornplete As Per Dlreclion Of The Engineer-In-Charge , Retro-Refle.Ctivesheeting Type-Xl With 4 Mm Thick Acm Single Side Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Thick With 0.4 To 0.5 Mm Both Slde Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Lntensity Prismatlc Sheeting Type Lv As Pet Irc-67:2012 Reko Reflective Sheeling With Back Frame L\,4S Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per L\Lorth Specification No_ 801.3.7 The Sheeting Shal Have A Pressure - Sensitive Adhesive Of The Aggressive Tack Type Requiring No Heal Solvent Other Preparation For Adhesion To A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acm (Alllminium Composite L\,4Aterlals) Shall Be Fixed On The Back Frame Ms Angle With Riveting. Micro Prismatic Type Lv Retro Reflective Sheeung Conflrming To Astlvl D4956-09 Shall Be Pressure Fixed. The Relro Reflective Sheeting Shall Be Tested For A Cefiilicate Of Having The Sheeting Tested For Coeificient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Iungus Resistance. 3 Years Outdoor Weathering And Lts Having Passed These Tests Shall Be Obtained From Lnlernational/Government Laboraiory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cefiificate Ls Obtained From Lnternational Condition. It Should Also Be Oblalned From Lndian Condition Wilhin 3 Years Of Launching Of Producl By The Manufacture In Abroad. Alternatively, A Certificate Conforming To Astii Speciflcation (D 4S5b-09) On Adiflcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Prcvisionally. Ln Such A Siluation, The Employer/Client, If So Desires, Could Seek For A Performance Guaranlee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirernent Of Three Years Outdoor Weathering Of Lhe Sheeting As Per Irc 67:2012 & Prooi Of The Same Reporl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpoftalion, Installation And Incldentals All Complete As Per Direction Oi The Engineer-Ln-Charge , Retro-Reflectlveshoeting Type-Xl With 4 Mm Thick Acm Double Side Providing & Rlxing Of Reflective Signs With A Colrosion Resistanl 4 Mm Thick With 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Face Lo Be Iully Covered With High Lntensity Prismatic Sheeling Type Lv As Per Irc-67:2012 Relro Retlective Sheeting Wlth Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specification No_ Bo1.3.7 .The Sheeting Shall Have A Pressure - Sensilive Adhesive Of The Aggressive - Tack Type Requiring No Heat, Solvent Other Preparation For Adhesion Lo A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer, The Acn,4 (Aluminlum Composite Materlals) Shall Be Fixed On The Back Fiame Ms Angle With Riveting. Micro Prismalic Type Lv Retro Reflective Sheeting Conflrming To Astm D4956 09 Shall Be Pressure Fixed. The Relro Refleclive Sheeting Shall Be Tested For A Ce(Iilcate Of Having The Sheeting Tested For Coefllcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Funqus Resistance. 3 Years Outdoor Weathering And Its Having Passed These Tests Shal Be Oblained From Lnternationa /Governmenl Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case Lhe Certillcate Ls Obtained From Internalional Condition, It Should Also Be Obtained From Lndian Condition Within 3 Years Of Launching Of Product By The Manufacture In Abroad Alternalively, A Ce(Iilcate Conforming To Astm Specification (D 4956-09) On Artiflcial Accelerated Wealhering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Sltuation, The Employer/Cllent, If So Deslres Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cedillcate Meeling The Requirement Of Lhree Years Outdoor Weathering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo( Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpo.Tation, Installation And Incidentals All Complete As Per Direction Of The Engineer-In-Charge , Bollard (Single Sido) Supply & Fixing Of Bollard Made(Single Side) Out Of2mm Thick Aluminium Sheet Face Lo Be Covered With High Intensity Prismatic Grade Type Lv Sheeting , Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specillcation No-801.3.7 . Welded Poly Shaped To Make It Monolithic Pillar Size 12Oo Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Is Fully Cover (Size Of Foundation 0.45X0.45X0.60M) , Bollard (Doublo Side) Supply 8, Fixing Of Bollad Made (Double Side) Out Of 2Mm Thick Aluminium Sheet Face To Be Covered With High Intensity Prismatic Grade Iype Lv Sheeting Legends , Letters , Numerals And Borders Etc Should Be As Per Morih Specification No-801.3.7. Welded Poly Shaped To Make It Monolithic Pillar Size 1200 Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Ls Fully Cover. (Size Of Foundalion 0.45X0.45X0.60M) , Solar Power Road Marker (Solar Studs) The Solar Studs Shalt Be Made Of Aluminium Alloy And Poly Carbonate Material Which Shall Be Absolutely Weather Resistant And Strong Enough To Support A Load Of 13,635 Kg Tested In Accordance With Ast[4 D4280. Lts Co]Our May Be While . Red , Yellow , Green Or Blue Or Combination As Directed By The Engineer . Its Water Resislance Shall Meet Lhe Requiremenls Of Lp 65 In Accordance Wilh 15:12063:1987 Category 2 For Protection Againsl Water Ingress The Dimensions Of Solar Sluds Shall Not Be Less Than 100 Mm X 100 Mm X 10 Mm Ltshall Have Super Bright Leds So As To Provide Long Visibillty From A Distance Of More Than B0o M. Lts Flashing Rate Shall Not Be Less Than1 Hz Lts Should Be Able To Glve The Prescribed Performance In The Temperrature Range Of - 40C To +55C Lts Life Shall Be Not Less Than 3 Years. The Rate Shall Include All Materials, Labour, Equipments, Fabrication, Transportation, Erecuon, Installation And Incidentals All Complete As Per Direclion Of The Englneer-In-Charge , Cast-Ln-Situ Cement Concreto M 20 Kerb Construction Of Cement Concrete Kerb With Top And Bottom Width 115 And 165 Mm Respectively, 250 Mm High In M 20 Grade Plain Cement Concrete On M-10 Grade Foundation 150 Mm Thick, Foundation Having 50 Mm Projection Beyond Kerb Stone, Kerb Stone Laid With Kerb Laying Machine, Foundation Concrete Tad Manually, Alt Complete As Per Clause 408. , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 90 Cm Equllateral Tringle With Dif,Lnitation Plate Size (20Cm X 60Cm , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Eqlrilateral Trinqle With Difflnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Circular With Difflnltation Plale (20Cm X 60Cm) . , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government B0 Mm X 60 Mm Reclangu annual repair With Difllnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Mm X 45 Mm Rectangular With Difllnitation Plale (2Ocm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm X 60 Cm Square With Difflnitation Plate (20Cm X 60Crn) , Direction And Place Identification Signs Up To 0.90 Sqm Size Board Providing And Erecting Directlon And Place Identification Retro Reflectorised S Gn As Per Irc-67 Made Of High Intensily G.Ade Sheeting The Relro Reflective Sheelng Shall Be Tested For A Certiicate Of Having The Sheeling Tested For Coefficient Of Reko Reflection. Daytime Colour And Luminance, Shrinkage, Flexibllity. Liner Removal Adhesion, Impacl Resislance, Specula. Gloss And Iungus Resistance, 3 Years Ouldoor Weathering And Its Having Passed These Tesls Shall Be Obtalned From Lnternational/Govemment Laboraiory/ Lnslitule By The Manufacturer Of The Sheeting And In Case The Certillcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condltion Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certiflcate Confonning To Ast[4 Specification (D4956 09) On Art Ficial Ccelerated Wealhering Requirements Faom A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer I Client, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Lhree Years Olrtdoor Weathering Of Lhe Sheeting As Per Irc 67 2012. Legends , Letters , Nurrerals And Borders Etc Should Be As Per Imorth Speciilcation No-801.3.7 Sheet Fixed Over Aluminium Sheetinq .2 Mm Thick Wilh Area Not Exceeding 0.9 Sqm.Supported On A Mild Steel Single Angle Iron Post 75X75x6 Mm Flrmly Fixed Lo The Ground By Rneans Of Property Designed Foundalion With N,4-15 Grade Cement Concrete 45X45x60 Cm.,Below Ground Lcvcl As Pcr Approvcd D.Awing. Complete. , Tree Plats Supply & Fixing Of Retro Reflective Tree Plate Having Size 15Cm X15cm, Conjisiing Type Xl Retro Reflective Sheeting Lixed Over 1.50 Mm Thick Aluminiu; Sh;Et Including Labour, Material T&P Etc For Proper Completion Of The Work. The Rate Shall Include All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 1000 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 750 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 500 Mm Helght , Aluminum-Backed Flexible Prismatic Sheeting Shall Be Made Of Yellow Colored Flexible Prismallc Sheeting With Non-Rnetallic Prismatc Lens Formed In A Lransparent, Synthelic Resin As Retro Leflective Elements. This Llexible Prlsmatic Sheeting Shall Have Black And Yellow Stripes With Aluminum Backed Flexible Prismatic Type Vl Sheeting Conforming To Astm: D4956 . Specifications And Standards Of Coefllcient Of Relro Refleclivity, Flexibility And Lmpact Resislance Applicable For Reboundable Devices This Flexible Prismatic Sheeting Shall Have Screen Printed Arrow/Slant Line Pattern In Black Colour In A Continuous Roll Format. Wldlh Of Object Marker Shall Be 300 Mm. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer In-Charge , 2.40 M Span Over Head Cantilever Structure With 150 Die Ms One Vertical Post (Double Side Retro Reflective Sign Boards) Supply, Fixing & Eraction Of Built Up Cantilever Structure 240 M Span O.PiiIng Oi One Ve.Tical Posts Of 7 30 N4 Heighl Made Up Of 150 Mm Nb Medium Class T\4S Pipe As Vertical Memberwelded With 10 Mm Ms Plate At Top & Lo Mm Lvls Plate At Boltom. Flxing To Vertical Post As Per Structllre Design & Drawing Wiih One Of Steel Primer And Two Coats Of Synthetic Enamel Plant And The R;Tro Reflective Sheetinq Shall Be Tesled For A Certifcale Of Having The Sheeting Tested Fo. Coemcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Olltdoor Wealhering And Ils Having Passed These Lests Shall Be Obtained From Lnternational/Government Laboraiory/ Lnstitute By The Manufactllrer Of The Sheeting And In Case The Certificate Is Obtained From Internatlonal Condilion, It Should Also Be Obtained From Lndian Condition Wilhin 3 Years Of Launchlng Of Product By The Manufacture In Abroad. Alternatively, A Cedificate Confonning Io Astm Speciflcation (0 4956 09) On Artificial Accelerated Weathering Reqllirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. N Such A Sltuation, The Employer / Client, If So Desiaes. Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerllllcate Meeting The Requirement Of Three Years Outdoor Weathering Ol Lne Sheeling As Pel Irc 67 2012 . Legenos . ,Etters . Numerdls And Borders Elc Sholllo Be Asperl\,4Orlh Specif,Calion No_801 37 The Work Includes Construction Of Reinforced Cement Concrete Foundation Of Size 0.60X0.60X1.20 M Of Required Depth As Per Site Condilion For Built Up Struclure Lncluding Earth Work In Excavation 100 Mm Thick Lean Concrete Ln 1:3:6 Cemenl Coarse Sand And 40 Mm Gauge Stone Ballast. Reinforced Cement Concrete Lm25 Includlng Supply And Fixing Of 25 Mm Dla Foundalion Bolts 600 Mm Long As Per Provision Of Slructure Design Including Cost Ot Reinforcement & Shuttering. The Lateral Vertical Clearances And Complete. Lnstallation Work Shall Be As Per Relevant Clauses Of Mort&H Specitlcation Seclion 800 And Irc 67 2012 Complete In A I Respect The Rates Shall Inclucle Cosl Ol Design Fabrication, Supply, Lransporlalion, Local Shifling Erection Of Signage Slructure Using Crane, Incluslve Of All Taxes Etc All T&P Machine, Material And Labout Required For Proper Completion Of Work As Per Direction Of Engineer-In-Charge , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 30X90 Cm (Lefrright) Object Hazard , Retro Rellectorisod Signs (Stajnless Steel Frame And Post With One Side Sings) Supply & Fixing Of Reflective Sign Board (Single Side) Of Size 1.50X1.20 M Retro Refleclive Sheeling Of Hip Grade Type-Lv, Lhe Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick, Acm Sheel Of Standard Make As Per Morth Specificaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Cm Cement Conclete Foundauon. The Stainless Steeljoint Welding Of Ss Pipe Work Shall Be Band And Grinder Property Including Bufflng So An To Give Uniiorm Shining At Weded Joinls. The Retro Reflective Sheellng Shall Be Lested For A Certiflcate Of Having Ihe Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Cololrr And Luminance, Shrinkage, Flexibility, Linet Removal, Adheslon, Impact Resistance, Specular Qloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Governmenl Laboratory/ Institute By Lhe Manufacturer Of The Sheeting And Ln Case The Cedillcate Is Obtained From Inlernational Condition, It Should Also Be Oblained From Lndian Condition Within 3 Years Of Launching Of Procluct By The Manufacture In Abroad Allernatively. A Certiflcate Confolrnlng To Astm Specilicalion (D 4956-09) On Artiflcial Acceleraled Weathenng Requirements From A Reputed Laboratory Ln Lndia Can Be Accepled Provislonally. Ln Slrch A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificale Meeting The Requirement Of Three Years Ouldoor Weathering Of The Sheeting As Per Irc 67I2012. Legends , Letters , Numerals And Borders Elc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Governmenl Repod Shall Be Uploaded While Quoting Tender. , Retro Reflectorised Signs (Stainless Steel Frame And Post With Both Side Sings) Slrpply & Fixing Of Reflecllve Sign Board (Sing E Side) Of Size 1.50X1.20 M Retro Reflective Sheeting Of Hip Grade Type-Lv, The Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick Acni Sheet Of Standard Make As Per Morth Speciilcaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Crn Cement Concrele Foundation The Stainless Steelioint Welding Of Ss Pipe Work Shallbe Band And Grinder Propefiy Including Butting So An To Give Uniform Shining At Weded Joints. The Relro Reflective Sheeting Sha I Be Tested For A Certificale Of Having The Sheeling Tested For Coefficient Of Retro Reflection Daytime Colour And Luminance, Shrinkage. Flexibiity, Llner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Reslstance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeling And Ln Case The Certiflcate Is Obtained Lrom Lnternational Condition, It Should Also Be Obtained From Lndian Condition Wlthin 3 Years Of Launching Of Product By The Manufacture In Abroad. Allernatively, A Cerlificate Conforming To Astm Specificalion (0 4956.09) On Artificial Accelerated Weathering Requlremenls From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificate Meeting The Requirement Of Three Years Outdoor Weather Ng Of The Sheeting As Per Irc 67I2012. Legends. Letters, Numerals And Borders Etc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Government Report Shall Be Uploaded Whlle Quoting Lender. , Type - A, W : Metal Beam Crash Barrier Providing And Erecting A W Metal Beam Crash Barrler Comprlsing Of 3 Mm Lhick Coffugated Sheet Melal Beam Ral 70 Cm Above Road/Ground Level Flxed On Ismc Series Channel Vertical Posl, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High. 1.1 M Below Grolnd/Road Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fltlings To Conform To Lsi1367 And 15:1364. Metal Beam Rail To Be Fixed On The Vedical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810 , Type - B, Thrie : Metal Beam Crash Barrier Providing And Erecting A Thrie Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Melal Beam Rail,85 Cm Above Road/Ground Level, Fixed On Isi\Ic Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Cenlre To Cenke, 2 M High With 1.15 M Below Ground Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fittings To Conform Lo Lsl1367 And Ls:1364 Metal Beam Rail 10 Be Fixed On The Verlical Post With A Space Of Channel Seclion 150 X 75 X 5 Mm, 546 Mm Long Complete As Per Clause 810 , Anti-Termite Treatment The Soil Along With External Perimeter Of Building At The Rate Of 2.5 Litres Of Emulsion Per Square Metre Of The Perimeter Wall {Chapter No.08 Si.No.5} , Anti-Termite Treatment Of The Bottom And Sides Of Excavation At The Rate Of 5Litres Of Emulsion Per Square Metre Of Surface Area {Chapter No.08 Si.No.1} , Anti-Termite Treatment Of The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface{Chapter No.08 Si.No.3} , Anti-Termite Treatment Of The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface {Chapter No.08 Si.No.4} , Anti-Termite Treatment Of The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (Area Of The Sub Structure In Contact With Backfill To Be Measured) {Chapter No.08 Si.No.2} , Treatment Of Existing Masonry Using Chemical Emulsion @ One Litre Per Hole At 300 Mm Interval Including Drilling Holes At 45 Degree And Plugging Them With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To The Full Depth Of The Hole : With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration {Chapter No.08 Si.No.6-2.35.4.1} , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration {Chapter No.08 Si.No.6-2.35.3.1} , Providing And Stacking 22.40-53Mm Guage Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Etc All Complete.(Ns) , Supply And Laying Stone Dust Etc All Complete. , Consolidation/Compaction Of Stone Ballast 10Cm Thick (Loose) Coat Including Repairing Of Patches Picking Up To Old Surface Spreading, Ballast Making Medhies To Retain Water And Carriage Of Metal Upto 30M Carriage Of Water Upto 200M Maintenance Of Barriers And All Labour T&P Including Road Roller Charges Etc. Required For Proper Completion Of Work The Stone Ballast Is To Be Supplied To The Contractor Free Of Cost At Site. , Scarifying The Existing Bituminous Road Surface To A Depth Of 150 Mm And Disposal Of Scarified Material With A Lift Upto 3 M And Lead Upto 1000 M As Per Technical Specification Clause 301.4 {Chapter No.20 Si No.16} , Providing And Applying Primer Coat With Ss1 Grade Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means. (As Per Attached Analysis) , Providing And Laying Dense Graded Bituminous Macadam With Higher Capacity Batch Type Hmp Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , Providing & Applying Tack Coat With Bitumen Vg-10 Using Bitumen Pressure Distributor At The Rate Of 0.30Kg/Sqm. On The Prepared Primed Granular/Old Painted Surface. Cleaned With Air Compressor. Including All Taxes, Material, Labour, T&P Etc Required For Proper Completion Of The Work. (For Bituminous Surface). (Chapter No.20 Si No.9) , Providing And Laying Bituminous Concrete (Grading-Ii) With 100-120 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Vg-30 As Per Approved Job Mix Formula Which Ever Is Higher Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification 5Th Revision Clause No. 509 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , S/L/J Of 20Mm Dia Pvc Cunduct Pipe Etc. All Complete. , Making Of Nala Bandha With Sand Bags. With Local Sand Including Etc. All Complete. (Atached Per Annalysis Rate). , Providing Of Nala Bandha For Diversion Of Nala Etc All Complete.(Ns) , Scraping Of Max Phalt Road Including Disposal Of All Scraped Material To A Distance Of 30Mtrs (100 Ft) As Directed By Engineer-In-Charge C.P. & T&P.Etc. All Complete. {Chapter No.20 Si No. 772(A)} , Dismentling Existing Damage Plaster Including Disposal Of Refuse As Directed By E/Ic With In A Distance Of 60 Meters Etc. All Complete. {Chapter No. 17 S.I. No.16 (706)} , Supply And Fixing Of Light Fitting Switch Board. (None Sheduled) , Fixing Of Gate, Grill And Jali Etc. All Complete. (None Scheduled) , Supply & Fixing Of Wiring Sub Main. , Supply & Fixing Of Plug Point 15Mm. , Supply And Fixing Oxided Iron Fitting Etc. All Complete (None Scheduled) , Supply/Fixing Of 16 Mm Pvc Pipe Adopter Suitable For Item No. , Supply/Fixing Of 20 Mm Cvc Pipe Adopter Suitable For Item No. , Supply & Fixing Of 27Watt. Cfl Etc. All Complete. , Supply And Fixing Cat Eye Including Supply Of All Material, Loabour, T&P Etc. All Complete. (Chapter No.28 Si.No.5B) , Supply And Fixing Wiring Of Light Point. (None Sheduled) , Making Connection Of Drain Of Sewer Line With Existing Man Hole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Cement Plastered On Both Side With Cement Mortar 1:3 Finished With A Floating Coat Of Neat Cement And Making Necessary Channels With Cement Concrete 1:2:4 For The Drain Etc. All Complete. (Chapter No.25 Si.No.9) , Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Course Sand : 4 Graded Stone Of Size 20 Mm Nominal Size) Laid In One Layer Finished With A Floating Coat Of Neat Cement (40 Mm Thick Floor). (Si No. 665), Nbo 14.71) , Providing And Fixing Of Foot Steps Etc All Complete. (Ns) On Market Rate , Providlng And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Ls:8931.15 Mm Nominal Bore , Supply & Fixing Of C.P. Brass Stop Cock (Conceled) Of Standerd Design Of Approve Quality Etc. All Complete. (Chapter No.21 Si.No.44) , Providing And Fixing Close Timbering In Trenches On Both Side & All Complete. (A) 0.00 To 3.00 M. (None Scheduled) , Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Ls:8931..15 Mm Nominal Bore , Fixing Window Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Ls Standards And Weighing Not Less Than 690 Qms.15 Mm Nominal Bore , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 75Mm Diameter. (Chapter No.23 Si.No. 32(Ii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 110Mm Diameter. (Chapter No.23 Si.No. 32(Iii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 140Mm Diameter. (Chapter No.23 Si.No. 32(Iv)) , Rectangular Shape 1500X450 Mm Mirror With Plastic Moulded Frame. (Chapter No.22 Si.No.77) , Making Ornamental 2D Painting With Special Design Make By Specialist Painter Laying Of Two Coat Birla White Putty And Design By Asian Paint Including All Material Etc. All Complete. (Nn Approved) , Providing Of 8Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Fixing Door Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Supply And Fixing 6Mm (1/4) Thick Chine White Glazed Tiles In Flooring Or Dado Laid With 1:3 Cement And Approved Coarse Sand Mortar And Approved Coarse Sand Mortar Finished With White Cement Jointed And Polishing Complete Including Supply Of All Materials, Labor For Porper Completion Of The Work. (Chapter No.14 S.I. No. 628) , Supply & Fixing Of Pre-Cast M-30 Cement Concrete Grass Paver (Rubber Molded Coloured) Over 40Mm Thick Local Sand Bed, With 3Mm Thick Joints Filled With Local Sand Including Leveling, Tempering And Sweeping Etc., Interlocking Bricks Will Be As Description Given In Direction Issued By The Ircsc-03-2004 And Should Be Isi Marked All Complete. 80Mm Thick, Strength Should Not Less Than M-30. (Tiles I Shape Decided By Engineer-In-Charge With Isi Mark) {Chapter No.20 Si.No.17F) , Repairing Of Leakage And Damege Pipe Line Etc All Complete.(Ns) , Lettering & Painting Of Wall Etc. All Complete. , Red Sand Stone Work For Wall Lining Etc. (Veneer Work) 30Mm Thick In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Camping Jointing In White Cemnet Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching Complete. (Chapter No.18 Si.No.1 New) , Providing And Fixing White Vitreous China Wash Basin Size 630X450mm With Pair Of 15Mm C.P. Brass Pillar Taps Including Etc. All Complete. (Chapter No.24 S.I. No. 3(A)) , Cleaning Of The Site For Workable Etc. All Complete. (Non Scheduled) , Providing Of 32Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 1200X600x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 600X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x100mm Etc All Complete. (As Per Market Rate) , Fixing Of Reinforced Cement Concrete Slab Etc All Complete. (Ns) , Raising & Re-Fixing Of Manhole Including All Material Labor T&P Etc. All Complete. (Non Scheduled) , Supply & Fixing Reinforced Cement Concrete Menhole Cover Heavy Duty Size Etc. All Complete. (Non Scheduled) , Providing Laying Spreeding And Compacting 45-90Mm Stone Agreegate For W.M.M. Specification Etc. All Complete. (None Scheduled) , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing Of 3D Ornamental Wall Art Painting By Architect & Special Painter Including Scrapping Of Wall And Two Coat White Putting White Putty One Coat Primer All Labour Scaffolding Work & Labour T&P Etc. Painting By Asian Special Paint Etc. All Complete. (Rate Mr As Smart City, Agra) , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam (22.40-53Mm) Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With 3 Wheeled Steel/ Vibratory Roller In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening/ Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density. , Providing & Laying 5Cm. Thick B.M. Laying By Paver Finisher Bitumen Of The @3.4%Kg By Weight And Stone Grit Etc. All Complete. (20-Chapter Analysis Rate) , Providing & Laying 2.5Cm. Thick S.D.B.C. Laying By Paver Finisher Bitumen Of The 5% By Weight Etc. All Complete. (20-Chapter Analysis Rate) , Supply & Fixing M/S Iron Work Display Board Including Painting, Lettering Etc. All Complete. (None Schedule) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.4A) , Supply And Fixing Of Precast Reinforced Reinforced Cement Concrete Benches (Pfrc) Ornamental Benches With 02 Year Warranty Etc All Complete. (None Scheduled) , S/L/F Supply Of 1000Mm Dia Np-3 Reinforced Cement Concrete Hume Pipe In Proper Position As Directed By E/I Including Catage Of Pipes Collars Upto 30M Distance Etc All Complete. (Chapter No.1 Si.No.31(E) ) , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 In Reinforced Cement Concrete Slab Excluding Supply Of Reinforcement And Its Bending But Including Its Fixing And Binding The Same With 24 Bwgi Binding Wire And Including Necessary Centring And Shuttering Etc. And Also Including Supply Of All Materials Labor And Tools And Plants Etc. Required For Proper Completion Of The Work. Strength Of The Concrete Shall Not Be Less Than M-150. (5-Chapter S.I. No.-284) , Supply & Fixing Granite Stone Work Display Board (Size 2.50Ft X 4.00Ft) Including Painting, Lettering Etc. All Complete. (None Schedule) , Installation Of 1.50 H.P. Isi Marked Sumbercible Pump Etc All Complete. (Attache As Per Santion Annalysis) , Cost Of Septik Tank Attache As Per Estimate & Details. , Plain Glass Best Quality, Cut To Size 5Mm Thick , Providing And Fixing Designer Dustbin (Market As Per Catlog Code No. Db-03). , Supply Of Planting Of Trees Amaltas, Jaarul, Arjun Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 110Mm Is:4984:2016 (As Per Market Rate) , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 160Mm Is:4984:2016 (As Per Market Rate) , Supply & Fixing Of Pre-Cast Reinforced Cement Concrete Drain Cover Different Size Etc All Complete. , Supply And Sowing Of Grass In Park Including One Year Mantinance Etc. All Complete. (None Scheduled) , Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 8 Km Lead Complete (Earth Measure Dinstacks Will Be Reduced By 20% For Payment) .(Dar 2020 Hort-Basic Rates 2.2) Based , Supply And Fixing Of Light, Fitting Switch Board. (None Sheduled) , Supply And Fixing Of Chest Press Double. , Supply And Fixing Of Leg Press Double. , Supply And Fixing Of Triple Twister. , Supply And Fixing Of Shoulder Builder Double. , Supply And Fixing Of Air Walker. , Supply And Fixing Of Doublebar. , Supply And Fixing Of Rower. , Supply And Fixing Of Horse Rider. , Supply And Fixing Of Plastic Side With Iron Ladder 12 Feet Length. , Supply And Fixing Of See Saw Double Board Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Sliding With Swing Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Slide Ground Level Mgr Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Snack Climber Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Slide Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Nursery Combo Set Revolving Jhoola Etc All Complete. (None Scheduled) , Providing And Fixing Of Stainless Steel Water Cooler 4 Tap Etc. All Complete. (None Schedule) , Supply And Fixing Bansi Paharpur (Red/White) Bharra Sand Stone Fully Moulded, Engraved, Carved With Polishing And Dressing Including Clamp And Fashners Of Pillar Set With All Complete Work Etc. (None Schedule) , Supply & Fixing Of Rubber Moulded Cement Concrete Kerb Stone (Double Tapper) M-20 With Labour T&P Etc All Complete. , Supply And Installation And Jointing Of 500Mmx500mm Epdm Rubber Mat Flooring Of Thickness 24Mm Puling All Labour Material T&P Etc. All Complete (Rate As Per Jhs Jscl Mr). , Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm/230Mm/300Mm Thick Aac Blocks In Super Structure Above Plinth Level Up T Floor Five Level With Reinforced Cement Concrete Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer-In-Charge (The Payment Of Reinforced Cement Concrete Band And Reinforcement Shall Be Made For Separately). , Providing And Fixing Of Barricading Of 100Mm Average Ballies With In A Distance Of 1.50 Meter For 3 Rows Of 3Q. 3 Nosof Cross Ballies, Two Supporting Ballies Of 3 Meter Ballies And 2 Nos Perpendicular Ballies Tie With Moonj Rope Including Supply Of All Material Such As Ballies Rope T&P Required For Proper Completion Of Work And Also Including Labour Component (Material Will Be Property Of Contractor After Dismantling). , Providing & Fixing Of Green/White Shade Multipurpose Net/Cotton Cloth Proper Completion Of Work Etc All Complete. (Ns) , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Supply And Fixing Of Ward Up Big As Per Attach Photograph & Analysis. , Supply And Fixing Of Ward Up Small As Per Attach Photograph & Analysis. , Supply And Fixing And Installation Of See Saw Double Board Jhoola Isi Marked As Per Direction Of Engineer-In-Charge Etc. All Complete As Per Attach Photograph & Analysis. , Supply And Fixing Of Cast Iron Banches As Per Attach Photograph And Analysis And Direction Of Engineer-Incharge Etc. All Complete. , Complete De-Silting And Cleaning Of All Types Of Sewer Lines By Using Super Suction Machine And Taking Out Of Cebris/Silt Etc Including Safe Disposal Of Silt As Directed By The Deptt. Including Cost Of All Consumble Likes Disel Oil, Water Ret Provision Of Diversion Of Line If Required With The Help Of Sewage Pumps, Poser Backup From Gene Sets For Running Of Pumps. Night Lighting Etc Barricades Display Of Entire Operation Along With Sadequate Safely Equipments Must Be Used By Sewer Workers Size Fo Sewer Line To Be Desilted As Detail Above 1000Mm Dia. , providing and laying Gsb With Graded Stone Ballast With Stone Grit Size Stone Ballast With Hand Ramming Watering Including All Material Labor T&P Etc.All Complete (Ns) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing & Laying Of Polythene Etc. All Complete. , Supply & Fixing Of Factory Wired Intergal Led Flood Light Luminaries With Die Cast Aluminum Housing Built With Driver Set Suitable For 140W. To 150W. Confirming To Ip 65 Protection Complete In All Respect. Cat Aaa ( S.I No. 1454 Pwd Schedule 2018) , Providing, Laying, Spreading And Compacting Stone Aggregates 45-63Mm Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Ro Ling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screen Ing/Bindin G Materials To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. (Labour , A Pre-Laminated Sheet, Often Referred To As A Prelam Sheet, Is An Engineered Myka Wood Work Product Where A Decorative Layer, Like Laminate Or Veneer, Is Pre-Attached To A Core Material Like Particleboard Or Mdf. These Sheets Offer A Durable And Aesthetically Pleasing Surface For Furniture, Interior Design, And Construction.(None Scheduled) , Same Is Ltme No-1 & Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters (Over All Area Of Door Shutter To Be Measured) , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration (Chapter No.8 Sr.No.6.1) , Supply And Fixing Of Advertisement Sign Board Size 4X3 As Per Direction Of Engineer-In-Charge Etc. All Complete , Supply Of Planting Of Trees Washington Palm, Amaltas, Cycus Revoluta, Ficus Benjamina Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Providing Of Rain Water Harvesting Drawing And Analysis Etc. All Complete (Details Attached). , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Drilling Of 200Mm Dia T/W Bore Suitable For 110Mm Dia Pipe All Complete With Labour T/P As Per Direction Of Engineer-In-Charge. , Suppply And Lowering Of 110Mm Dia 6 Kg/Cm2 Pvc Pipe (Phenolex Or Apb By E/I) All Complete. (Isi Marked Only) , Supply And Pouring Of Pea Gravel Suitable For T/W Bore All Complete. As Per Direction Of E/I (If Required) , S/L Of 1.50 H.P. Submersible Pump Set 65 Mt Head. (Pluga, Crompton, Ksb Etc.) I.S.I. Marked Etc All Complte. (Water Filled Only) , Supply & Fixing Of 100Mm Pvc Pipe Adopter Suitable For Item No.2 , S/L Of 1.50 H.P. Submersible Motor Controlled Starter Pannel All Complete. Crompton Make. (I.S.I. Marked Only) , Supply/Fixing Of 25Mm Gate Valve All Complete. Approved Make. , Supply/Fixing 4Sq.Mm 3 Core Copper Cable All Complete. , S/L Of 40Mm Dia Red Screen Ashirbad Pvc Pipe All Complete. , Supply/Fixing Of M.S. Clamp Made With 65X6mm X600mm Long M.S. Streep Suitable For 110Mm Dia Pvc Pipe For Holding All Complete. , Supply/Fixing Of 40Mm Dia G.I. Pipe B-Class Complete With Labour Charge. (Including All G.I. Fitting) , Supply & Fixing Of 25Mm Cpvc Etc. All Complete. , Development Of Bore Till The Discharge Is Free From Turbidity Of Compression Including Labour, Required For Proper Completion Of Work. , Supply And Fixing Of Precast Readymade Boundry Wall Hieght 8 Feet Etc All Complete. (As Market Rate) , Useable Brick (A) Class M-L50 , Useable Brick (B) Class M-100 , Useable Brick(C ) Straiqht Over Brunt , (D) Tiles, Bull Nose Drip Course Brick , Brick Ballast (A) Brick Ballast 40Mm Qauge , Brick Ballast (B) Class-150 Brick Ballast 25Mm Gauge , Brick Ballast (C ) Brick - Bats Of O.B.B./150 Bb , Fiy Ash Brick (Specification/Strength Should Not Be Less Than Bricks - M-{50) 230Mmx1 10Mmx75mm , Aac Block Autoclaved Aerated Concrete Block (Aac Block) Conforming To Ls : 2185 - 2005 (Part-3) Including Loading, Cartage Upto Site, Unloading, Stacking And Including All Levies And Royalties If Any But Excludinq G.S.T , Stone Ballast (Khera Thakur Quarry Bharatpur Rajsthan) 45-90 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 45-63 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 22.4-53 Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 20Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 19Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) Crushed Stone Dust 2.36Mm & Below , Stone Dust , 13.20Mm Guage , 11.20Mm Guage , 6.7Mm Guage And Below , Stone Boulder (From Khera Thakur Quarry) (A) 25-40 Kq , Stone Boulder (From Khera Thakur Quarry) (B) 40-60 Kq , Stone Boulder (From Khera Thakur Quarry) (C) Stone Bricks Dressed , Grit {District Gwalior(Mp) Quarry}(Berja,Chandrapura, Turak Pura,Parsen,Sumerpada Padampur Kheria, Bhileti & Bilara) District Bhind (M.P.)(Pali, Dirman & Piparsana) , (A) 45-63 Mm Guage Stone Ballast. , (B) 22.4-53 Mm Guage Stone Ballast. , (C) 20-40 Mm Guage Stone Ballast. , (D) 20 Mm Guage Stone Ballast. , (E) 19 Mm Guage Stone Ballast. , (F) 16 Mm Guage Stone Ballast. , (G) 13.20 Mm Guage Stone Ballast. , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured Rubber Moulded , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 (Plain) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 16 X6 (Designer) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 18 X6 , Coarse Sand (Excluding Actual Bulkaqe) , Fine Sand (Excludinq Actual Bulkaqe) , (L) Local Sand , Cement (L) Portland Cement (J.P., A.C.C., Birla, J.K.) O.P.C , Cement (Ll) Cement (P.P.C.) , Cement (Lll) White Cement (J.K. Or Birla Brand) , Green Net(Chapter- 1 Sl.No 44) , Tractor Trolley With Driver Including P.O.L. (Chapter-2 Sl.No 25)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 142
Uttar Pradesh View Result →
9.
Public Administrative Department #11286668 AOC
Tender For Construction/Repair Work In Record Room/Nazarat Department - (a) Bricks M-150 2 (b) Bricks M-100 3 (c) Bricks-Straight over brunt 4 (d) Bricks- Tiles (Ist Class) 5 (e) Brick Bats M-75 6 (f) Brick Bats (O.B.) 7 Fly ash Bricks (specification/strength should not be less then Bricks M-150)size 230x110x75mm 8 Fly ash Bricks Tiles (specification/strength should not be less then Bricks M-150)size 230x110x38mm 9 Fly ash Concrete curve Stone (specification/strength should as per mord/morth) size 300x300x150mm (M30) 10 (a) 5.00cm. Gauge 11 (b) 4.00 cm. gauge 12 (c) 2.50 cm. gauge 13 Stone Grading Materials Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm 14 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5mm 15 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm 16 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6mm 17 Aggregate - Grading I (40 mm nominal Size) 10 mm - 5 / 4.75 mm 18 Aggregate - Grading I (40 mm nominal Size) 25 mm – 10mm 19 Aggregate - Grading I (40 mm nominal Size) 37.25 mm -25mm 20 Aggregate-Grading I 90 mm to 45 mm 21 Aggregate-Grading II 63 mm to 45 mm 22 Aggregate-Grading III 53 mm to 22.4 mm 23 Aggregates 22.4 mm to 2.36 mm for wet mix macadam 24 Aggregates 45 mm to 22.4 mm for wet mix macadam 25 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron 26 Crushed Stone Aggregate 26.5 mm to 75 micron 27 Crushed Stone chipping 13.2 mm nominal size 28 Crushed Stone Chipping 6.7 mm size 100% passing 11.2 mm and retained on 2.36 mm 29 Crushed Stone Chipping 6.7 mm size 100% passing 9.5 mm and retained on 2.36 mm 30 Crushed Stone chipping 9.5 mm nominal size 31 Crushed Stone Coarse Aggregate Passing 53 mm and retained on 2.8 mm 32 Fine aggregate/Crushed sand 2.36 mm to 75 micron 33 Stone Boulder of size 150 mm and below 34 Stone for Coarse Rubble Masonry 1st Sort 35 Stone for Coarse Rubble Masonry 2nd Sort 36 Stone for Random Rubble Masonry 37 Stone for Stone Set Pavement (300 mm x 200 mm x 150MM 38 Well Graded Material for Sub-Base - Grading I 2.36 mm below 39 Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm 40 Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm 41 Well Graded Material for Sub-Base - Grading II 2.36 mm below 42 Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm 43 Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm 44 Well Graded Material for Sub-Base - Grading III 2.36 mm below 45 Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm 46 Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm 47 Boulder with minimum size of 300 mm for Pitching at Site 48 Granular Material or hard murrum for GSB works at Site 49 Close graded Granular sub-base Material 37.5 mm to 9.5 mm 50 Close graded Granular sub-base Material 9.5 mm to 4.75 mm 51 Close graded Granular sub-base Material 4.75mm to 75 micron mm 52 Close graded Granular sub-base Material 2.36 mm 53 Coarse graded Granular sub-base Material 4.75mm to 75 micron mm 54 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm 55 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 56 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 57 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 58 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 59 Coarse graded Granular sub-base Material 53 mm to 26.5mm 60 Stone screening material for WBM Grading-2 and 3 61 Miscellaneous Items Cement Grey PPC 62 Cement Port land (ordinary) 63 Cement white viz J.K./Birla 64 Wall Putty J.k / Birla white 65 Plaster of Parish Sakarni or eqvivalent 66 Cinder 67 Distemper oil bound 68 Dry Distemper ordinary of bes quality (Approved manufacture and approved quality viz. Burger, Asian, J&N 69 Glass Ordinary cut to size (a) 3mm thick (Wt. 7.5 Kg./sqmt.) 70 (b) 4mm thick (Wt. 10.0 Kg/sqmt.) 71 (c) 5.5 mm thick (Wt. 13.5 Kg/sqmt.) 72 White lime (unslacked) for White Washing 73 White Lead (Best Quality PIG Lead) 74 (d) G.I. Barbed wire 75 (e) Iron Sheet Galvanized Plain 22 gauge 76 (f) Iron Sheet Galvanized Plain 24 gauge 77 (g) -do- but corrugated 24 gauge 78 (h) -do- but black plain 18 gauge 79 (J) Expanded metal 2-0 cm mesh 16/17 guage 80 (K) M.S. binding wire 24 gauge 81 (i) 1x2 size of 10 gauge wire 82 (ii) 1x3 size of 10 gauge wire 83 (iii) Murga Jali 1/2x24 gauge 84 (iv) 1x2 size of 10 gauge wire 85 (i) F -d sections @ 1.58 Kg/R/M 86 (ii) F -B/T/T Secs. @ 2.40 Kg/R/M 87 (iii) F - Sections @ 0.74 Kg/R/M 88 (a) Super white 89 (b) Commercial white, coloured & black 90 Marble Dust (200 mesh) 91 Nails (Country) 92 Nails (Wire) 93 (a) Oil (linseed double boiled) 94 (b) Oil (Terpentine) 95 (a) Paint anticorosive Bitumenous 96 (b) Black Japan 97 (c) Superior Ready Mixed paints (Grade II) in 20 ltrs. Drums of approved manufactures and aporoved make 98 (i) Dark Green Oxide 99 (ii) Deep Black Oxide 100 (iii) Blue Oxide 101 (iv) Chocoiate Oxide 102 (e) (i) Red Oxide primer surface for steel (in 20 ltrs. Drum) (Approved manufactures and approved make) 103 (ii) Red lead paint ready mixed for roof (in 20 ltrs. Drum) (Approved manufactures and approved make) 104 (f)(i)PaintenamelGradeIsuperClass(Approved manufactures and approved make) 105 (ii) Paint (Aluminium) 106 (g) (i) Paint primer for wood 107 (ii) Paint primer for metal 108 (h) (i) Cement Primer of Berger or equivalent 109 (ii) Water proof cement paint (in 50 kg. drums) 110 (i) Clear synthetic (in 20 ltr drums) 111 (ii) Copall 112 (iii) Weather Coat cement paint for exterior 113 (iii) Weather Coat cement paint for exterior 114 Water Proofing compound (Dr. Fixit) 115 Polish (mansion & wax) 116 (iv) P.V.C. Pipe 110 mm dia & 6Kg./CM2 (ISI Marked) 117 (v) Same as above but 90 mm dia 118 (vi) Same as above but 75 mm dia 119 (v) Same as above but 140 mm dia 120 (a) Corrugated 121 (b) Plain 122 (i) Internal dia 5 cm (Wt. 11.41 Kg.) 123 (ii) Internal dia 7.5 cm. (Wt. 16.52 Kg.) 124 (iii) Internal dia 10 cm. (Wt. 21.67 Kg.) 125 (iii) Internal dia 15cm. (Wt. 21.67 Kg.) 126 (i) 5.0 cm dia (Wt. 2.30 Kg. ) 127 (ii)7.5 cm dia (Wt. 3.30 Kg.) 128 (iii) 10.0 cm. dia (Wt. 4.60 Kg.) 129 (i) 5.0 cm dia (Wt. 2.10 Kg. ) 130 (ii) 8.0 cm dia (Wt. 3.20 Kg.) 131 (iii) 10.0 cm. dia (Wt. 4.40 Kg.) 132 (c) C.I. Spout 23.0 cm Long 40 mm dia 133 (a) Rope (Moonj) 134 (b) Rope (HEMP) 135 (c) Rope (cotton) 136 (d) Spun yarn 137 Rivets 138 Coarse sand of approved quarry (Finess modules 2.20) at site of work in the district Saharanpur, Muzaffarnagar 139 Finesand(blendedtofineness modulus1.25) Saharanpur, Muzaffarnagar and Shamli 140 (a) Local Sand 141 Surkhi 142 White lime (slacked) 143 (a) Washers (Lumpet) 144 (b) Washers (Bitumen) 145 (c) Washers G.I. 146 J.Hooks 147 Wood presevator in 5 ltrs. Pack. 148 (a) Teak wood 149 (b) Sheesham 150 (c) Indian Sal 151 (a) Teak wood 152 (b) Sheesham 153 (c) Indian Sal/ maleshien 154 Fuel Wood (Dry) 155 (a) 2.2 cm width 156 (b) 3.50 cm. width 157 (c) Same as 48 (a) but 5 mm thick 158 (d) Same as 48 (b) but 5 mm thick 159 Antitermite treatment oil concentrate to 0.30 (as per IS 1307) 160 (i) 40mm thick 161 (ii) 50 mm thick 162 (a) KOTASTONE (machine cut ) 60 x 60 cm. 163 (a) Marble White 60 x 60 cm. 164 (b) Marble White 60 x 60 cm. 165 Granite stone black or Grey Polished 166 Granite stone black or Grey Polished 167 Polythene Sheet (125 Micron) 168 Plastic waste which is cleaned is cut into a size between 2.36mm and 600 microns and of maximum size 2.36 mm length and 2.00mm width. 169 (a) For Floor Size 300 x 300 170 (b) For Wall Size 200 x 300 171 (c) Vitrified Tiles size 600 x 600 172 RCC Hume Pipe 350mm dia 173 RCC Hume Pipe 450mm dia 174 (a) Ordinary 175 (b) For floor and tile work 176 Carpenter 177 Black Smith 178 Hammer man 179 Fitter 180 Painter 181 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 182 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 183 (b) Electrician Licensed with Kit or Koshal vikash certificate 184 (b) Electrician Licensed with Kit or Koshal vikash certificate 185 Mate 186 Beldar / Mali 187 Bhishti with Mushk 188 White Washer 189 Belder for bitumen or tar work 190 Glazier 191 Bhainsa Buggi with driver 192 Tractor trolley with driver excluding P.O.L. 193 Amin/Tracer 194 Chaukidar 195 Jeep/Truck/Tractor/Roller Driver 196 Generator Operator 197 Mixol Operator 198 Pump Operator 199 Cleaner 200 Sweeper (Full Time) 201 Sweeper (Part Time) 202 Tractor with harrow or water TankerTrolly with 203 Tractor with harrow or water TankerTrolly with 204 driver and P.O.L. 205 J.C.B. Machine with driver with P.O.L. 206 Crane (20-50 Tonnee) with Driver and P.O.L. 207 Ricksaw Thela with Driver 208 (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) 209 (a) As in item 251 (a) above but excavation in soil mixed with Moorum, shingle, kankar requiring the use of special tools and plant such as pickaxes, sabbals etc. (where machine can not move ) 210 (a) Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) 211 (a)Add to items (251-253) for every additional 30 M. (100 ft.) lead or part of 30 M (100 ft.) or for every additional 1.50 M. (5 ft.) lift or part of 1.50 M. (5 ft.) 212 (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measuredat a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. 213 (i) Cleaning jungle including up rooting ofrank, vegetations grass, push, wood trees and amplings of grith upto 30 cms. measured at a height of 1 M. aboveground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. 214 (a) Same as above 259(i) above but grass only. 215 (a) Add to item no. 253 (a) for mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc. 216 (b) As in item no. 260 (a) above but for departmental works excluding Roller charges and its fuel, cost of water, allT&P. and sundries etc. but including carriage of water to site. 217 Upto ½ Km 218 Ist Km. (If lead is beyond ½ Km.) 219 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 220 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 221 As in item 273 above but in proportion 10:5:1 222 As in item 273 above but in proportion 8:4:1 223 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 224 (b) Same as item no. 279 (a) but in proportion of 1:3:6 225 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 226 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 227 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 228 As in item 273 above but in proportion 10:5:1 229 As in item 273 above but in proportion 8:4:1 230 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 231 (b) Same as item no. 279 (a) but in proportion of 1:3:6 232 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 233 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 234 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 235 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 236 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 237 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 238 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 239 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 240 As in item 309 above but for walls of one brick thick, add for extra labour 241 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 242 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 243 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 244 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 245 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 246 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 247 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 248 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 249 As in item 309 above but for walls of one brick thick, add for extra labour 250 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 251 Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 252 As in item No. 401 but for sheesham wood 253 As in item no. 401 but with Indian Sal wood 254 Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glass to be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt. 255 Providing and fixing Glass panes with teak wood beading in doors and windows as desired by the Engineer incharge including cost of all materials, fittings, hinges, labour, T&P all etc. required for proper completion of the work. 256 As in item no. 409 above but fully panelled. 257 As in item no 409 above but fully glazed. 258 As in item no. 409 above but 3.8 cm. thick. 259 As in item no. 411 above but 3.8 cm. thick. 260 As in item no. 412 above but 3.8 cm. thick. 261 As in item no. 409 above but 3.8 cm. thick, Shisham wood. 262 As in item no. 411 above but 3.8 cm. thick, Shisham wood. 263 As in item no. 412 above but 3.8 cm. thick, Shisham wood. 264 Supply and fixing of 3.8 cm. (1½) thick Teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm. (1/10 or 1/12 or 1/16 inch) mesh or any other size, with necessary beadings, including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including two coat of black Japan on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 265 As in item (450) above but in shisham wood. 266 Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. 267 As in item (455) above but with shisham wood battens. 268 As in item (455) above but with Indian Salwood battens. 269 As in item (455) above but with Deodar wood battens. 270 As in item no. 409 but Indian Commercial flush shutters 35 mm. thick (excluding cost of all fitting). 271 As in item no. 409 but Indian Commercial flush shutters 32 mm. thick (excluding cost of all fitting). 272 As above 471 but Double Leaf Add. extra. 273 Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) 274 As above item no. 473 Aluminium Fittings ISI marked. 275 Supply and fixing of 3.8 cm. (1½) thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings 276 Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) 277 As in item no. 9.26 above but for single leaf. 278 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 279 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 280 As in item no. 9.29 above but for single leaf. 281 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 282 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 283 As per item above A but with shisham wood batton 284 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 285 Fixing of Curtain rods (Labour only) 286 Fixing of Curtain palmets (Labour only) 287 50x20 mm 288 50x12 mm 289 With 2nd class teak wood beading 62X19 mm. 290 300x16 mm 291 250x16 mm 292 250x10 mm 293 200x10 mm 294 150x10 mm 295 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 296 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 297 As in item no. 9.29 above but for single leaf. 298 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 299 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 300 As per item above A but with shisham wood batton 301 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 302 Fixing of Curtain rods (Labour only) 303 Fixing of Curtain palmets (Labour only) 304 50x20 mm 305 50x12 mm 306 With 2nd class teak wood beading 62X19 mm. 307 300x16 mm 308 250x16 mm 309 250x10 mm 310 200x10 mm 311 150x10 mm 312 250x10 mm 313 200x10 mm 314 150x10 mm 315 100x10 mm 316 125 mm 317 100 mm 318 75 mm 319 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI C sections (39mm x 19mm x O.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be filled with 3mm thick high - pressure compact laminate asper manufacturers specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). 321 With decorative veneering on one side and commercial veering on other side. 322 With non decorative veneering on both sides. 323 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 324 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 325 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 326 Same as in items 502 above but steel Z Section window excluding Glass panes.(ii) Openable panels 327 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 328 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 329 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 330 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 331 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 332 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 333 with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 334 As per item no 517a but with steel strip inplace of angle iron. 335 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 336 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 337 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 338 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 339 providing and fixing top cover for rolling shutters 2.50 meter wide. 340 Providing and fixing ball bearing for rolling shutters. 341 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 342 (b) Shutters above 16.8m² (180 sqft) area 343 (i) Door chaukhat 344 (ii) window chaukhat 345 (iii) Ventilator chaukhat 346 (iv) Stair case Nosing 347 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 348 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile B 349 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile C 350 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile E 351 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 352 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 353 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 354 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 355 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 356 Same as in items 502 above but steel Z Section window excluding Glass panes. (ii) Openable panels 357 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 358 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 359 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 360 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 361 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 362 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 363 Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 364 As per item no 517a but with steel strip inplace of angle iron. 365 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 366 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 367 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 368 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 369 providing and fixing top cover for rolling shutters 2.50 meter wide. 370 Providing and fixing ball bearing for rolling shutters. 371 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 372 (b) Shutters above 16.8m² (180 sqft) area 373 (i) Door chaukhat 374 (ii) window chaukhat 375 (iii) Ventilator chaukhat 376 (iv) Stair case Nosing 377 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 378 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B 379 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 380 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E 381 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 382 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 383 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. 384 Same as in item 574 above but Flush pointing Deduct from item 574. 385 Same as in item 574 above but in floors deduction from item 574 & 575. 386 Struck cement pointing with 1:2 cement and fine sand of 1.25 F.M. mortar with colouring including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 387 12 mmthick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 388 As in item (582) above but with cement and approved coarse sand mortar in 1:3. 389 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:4. 390 As per Item No. 584 but with 1:4 cement and Corse sand 391 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:6. 392 Add for extra labour to all item of plaster if done ceiling. 393 Add for extra labour and materials for plaster over rough face of one brick wall. 394 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 395 Same as above item but 1.20cm. thick instead of 2 cm thick. 396 Engraving lines in plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-incharge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (add for extra labour to all items of plaster), 397 Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 398 20 mm thick rough cast exterior cement plaster on walls consisting 10 mm thick backing cast of 1:3 cement mortar (1 cement :3 coarse sand) and 10 mm thick finishing coat of 1:3 cement mortar (1cement :3 coarse aggregate of size 6mm to 12 mm ) including arises, chamfers and/or rounded angles not exceeding 80 mm. 399 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 400 (A) As in item no. 601 above but without base concrete. 401 (B) As in item no. 601 above but base concrete consisting of brick ballast and fine sand & cement in prop. 12:6:1 402 As in item (601) above but floor shall be 4 cm (1½) thick instead of 2.5 (1) thick and without base concrete. 403 Add in item (601) to (603) and (605) when floors are polished including supply of extra cement, chapra batti, Carborandum stone, all other materials, labour, Tools & plants etc. required for proper completion of the work. Marble dust shall be added in the floting coat in ratio of 5:1 (cement and marble dust) if necessary but no extra amount will be paid for it. This includes final finish with french mansion polish or any other approved polish. 404 M-150 Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. 405 As in item (615) above but bricks laid flat. 406 Granolithic marble flooring 2.5 cm. (1) thick consisting of 2 cm. (3/4) thick layer of 1 part cement, 2 parts of approved coarse sand and 4 parts of 2 cm. (3/4) graded approved stone chips including 5 mm (¼) thick surface coat with ordinary cement, black and white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 1.5 mm. (1/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-incharge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish and including 8 cm (3) 1:6:12, concrete base, including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work 407 As in item (620) above but when white cement is used in top 5 mm (¼) layer. 408 As in item no. (620) above but when coloured floors are to be made. 409 Granolithic marble dado 2 cm. (¼) thick consisting of 15 mm. (9/16) thick layer of one part cement, 2 parts of approved coarse sand including 5 mm. (3/16) thick surface coat with ordinary cement black or white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 15 mm. (9/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-in- charge and polished by hand or by machine and finally finished with French Mansion Polish or any other approved polish including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work. 410 Same as item no. 625 above but 12 mm. thick dado. 411 As in item (625) above but when white cement is used in top 5 mm. (3/16) thick layer instead of ordinary cement. 412 As in item (625) above but when coloured dados are to be made. 413 Supply and fixing 6 mm. (¼) China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants 414 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (a) of 2.2 cm. depth 415 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (b) of 3.5 cm. depth 416 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (c) of 2.2 cm. depth and of 5 mm thickness 417 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete(d) of 3.5 cm. depth and of 5 mm thickness 418 Extra for making chequers of approved patterns on cement concrete, floor, steps landing etc. 419 Supply and fixing of Kota stone in floor ing 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 420 As in item no. New item (1) above but 25 mm thick. 421 Supply and fixing 10 to 12 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 422 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- charge 423 Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. 424 As in item (641) above but for every coat after first coat. 425 As in item (642) above but for every coat on previously painted old wood or Iron work including its sand papering, rubbing and cleaning as required for proper completion of work. 426 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 427 As in item (644) above but for every coat after the first coat. 428 As in item (645) above but for every coat over previously painted surface 429 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 430 As in item (647) above but for every subsequent coat on previously treated surface . 431 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 432 As in item (649) above but for every coat after the first coat. 433 As in item (649) above but for every coat after the previous coat or subsequent coat. 434 One coat hot coaltar on new surface including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 435 As in item (652) above but for every coat after the first coat or on previously treated surface. 436 One coat surface or other approved preservative on new wood work, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 437 As in item (654) above but for every coat or on previously treated surface. 438 Oiling wood work with double boiled linseed oil including supply of all materials labour, Tools & plant etc. required for proper completion of the work. 439 Removing paint or varnishing with paint remover or with caustic Soda, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 440 Polishing with French Polish or wax polish (in proportion 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 441 As in item No. (658) above but on previously polished wood or wood based surface. 442 Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 443 Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade 444 Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 445 Same aas item 660 but for weather coat. 446 Sameaasitembut over previouslypainted surface weather coat. 447 Providing cement primer on old/new surfaces 448 Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 449 Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 450 White washing one coat including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 451 As in item 671 above but Two coats. 452 As in item 671 above but Three coats. 453 Colour washing one coat using approved. Colouring material buff, blue, gray or brown shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 454 As in item 674 above but two coats. 455 As in item (674) but using approved colouring material of pink, green or yellow shade. 456 As in item 676 above but two coats. 457 As in item (674) above but colour washing with copper or iron sulphate one coat. 458 As in item 678 above but Two coat. 459 Cement washing including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 460 One priming coat and one coat of dry distemper on new work including supply of all materials, labour, Tools & plant etc. reqired for proper completion of work. 461 As in item (681) but for each coat of distemper after the first coat 462 Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 463 Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). 464 As in item (692) above but in mud mortar. 465 Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 466 Dismantling Jack arched or wooden beam and barga roofs including beam, roof concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 467 As in item (695) above but only roof concrete. 468 Dismantlingcementconcreteorbrickor granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 469 As in item (697) above but floor to be stone flagged or tiled floor. 470 Dismantling corrugated Iron roofs walls or partitions,includingpurlins,battensand vertical supports and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 471 Dismantling of girders, trusses and other steel work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 472 Dismantling doors or windows including chaukhats with hold fast and including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 473 Dismantling doors or windows leaves including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 474 Dismantling doors or windows including chaukhats but excluding hold fast and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 475 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 476 Raking out joint of brick work in cement or lime morter to a depth 1 cm. (3/8) including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 477 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 478 Supply and fixing of 10cm. (4) internal dia A.C. down pipes Everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3mm. (1 x1/8) fixed to walls with cement motar (1:2) and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. 479 As per item No. 730 above but for 10.0 cm. PVC down pipe.(kissan/suprime make) 480 As per item No. 730 above but for 7.5 cm. PVC down pipe. .(kissan/suprime make) 481 As per item No. 730 above but for 5.00 cm. PVC down pipe..(kissan/suprime make) 482 Providing and injecting chemical for preconstruction anttermite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding or pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (part II 1981) Aldrine emulsifiable concentrate or any other approved material such as heptachlor of chlordane will be used. The rate of application of chemical emulsion shall be as follows :- 1.Treatment for massonary and foundation 5 liters per sqm. 2.Back fill in immediate contact with foundation 7.5 liters per sqm. 3.Treatment of surface of plinth filling 5 liters per sqm. 4.Treatment of soil along external perameter of Building 7.5 liters per sqm 5. Treatment of soil under external parameter 5 liters per sqm. 483 Providing & injecting chemical for post Constructional anti termite treatment with drilling holes at junction of floor with walls & pillars, the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall also be as provided in the I.S. code, including quarterly inspection and providing required treatment for one year. As direction by the Engineer-in-charge. 484 Consolidation of Kankar by hand rammer including opening out stacks sorting kankar into three sizes, repairing patches in existing road suface with kanker making medhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft.) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, kankar to be supplied to the contractor free at site. 485 (A) As in item No. 752 above but 12 cm. (loose) thick coat of stone ballast. 486 (B) As in item No. 755 (a) above but excluding roller charges. 487 (D) As in item No. 755 (a) above but upto 10 cm. (loose) thick coat. 488 (E) As item No. 755 (b) above but upto 10cm. (loose) thick coat. but excluding roller charges. 489 Water allowance to be allowed on item No. 751 to 756 including carriage & cost of water where water is not available at site. 490 Dag belling 15cm (6) deep in one line aligned with flags and jhandies as directed by Engineer- in-charge. 491 Painting white/coloured traffic lines 8-15 cm. wide in three coats with approved road making paint (spirit base) as directed by the Engineer- incharge, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 492 Painting on divider 1 priming and two coats of enamel paint including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 493 As per item above but every coat after Ist coat and on old surface 494 Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8) depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. 495 As in item No. 762(a) above but with bricks laid on edge. 496 M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8) depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. 497 Renewing patries 1.5 metere wide including dressing surface filling upto 8cm (3) depth and making namunas, at every 15 metre apart on either side of the road true to patri template with side slopes of 1:2 etc. trenches for taking the earth to be so dug that they form a continuous side drain at road boundary. 498 Brick lining on both side of the road of M-150 bricks 7 cm. wide. 11 cm. deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-charge. 499 Cleaning the existing painted /primed surface and laying premix 2cm. (3/4) thick over a tack coat with graded approved grit and bitumin (labour only) including heating the paint and grit to the required temperature and mixing either in mixer/ hand drum or by manual including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge . including labour charges for tack coat. 500 As in item No. 781 above excluding T&P and sundries etc. for departmental works. 501 As in item No. 781 above but in Patches. 502 As in item No. 781(a) but in Patches. 503 Cleaning the premix surface and laying seal coat with approved 6mm (1/4) graded grit and bitumin (labour only) including heating the paint to the required temperature and mixing either in mixer, hand drum including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge including all T&P and sundries to be arranged by the contractor but exculding roller charges and fuel wood. 504 As in item No. 783 above but in Patches. 505 Providing and applying primer coat over prepared surface of granular base with slow setting bitumen emulsion with spray set including cleaning of W.B.M. surface spreaying primer @ 0.6 kg/sqm (excluding emulsion) all labour T & P etc. as per MORT&H Specification. (labour rate only) in patches 506 Brick soling with straight over brunt bricks laid flat and dry (labour only) including preparation of subgrade to prescribed camber, filling joints with local earth spreading a blinding coat 1 cm (3/8) depth of local earth over the entire surface and including labour T&P etc.required for proper completion of the work.. 507 As in item No. 785 above but with bricks laid on edge. 508 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(i) 350 mm dia 509 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE (ii) 600 mm dia 510 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iii) 800 mm dia 511 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iv) 900 mm dia 512 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(v) 1000 mm dia 513 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work, (i) 350 to 600 mm dia 514 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work(ii) 800 to 1000 mm dia 515 (a) Laying and Consolidation of stone ballast in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 516 (b) Laying and Consolidation of Brick ballast/ bats in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 517 Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer In charge. For two days 518 As item above but for more than 02 days. 519 As per item above but with three rows of horizontal ballies. 520 Dismantling of old brick laid on edge kharanja including stacking of old bricks . 521 As per item above but bricks laid flat / C.C. Interlocking tiles 522 Providing & laying of hot applied thermoplastic compound 2.5 m.m. thick including reflectorising glass beads @ 250 gms./Sq.mt. area. Thickness of 2.5 mm. inclusive of surface applied glass beads as per I.R.C. 2.35. The finished surface must be level, uniform and free from steaks and holes.Supplying & laying of Empty cement bags 523 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 524 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 525 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 526 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 527 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 528 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 529 Providing and laying of interlocking concrete Block pavement having thickness 60 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 530 Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 531 Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 532 Providing & supply gunny bags including cost of sand and stitching of bags and laying in position. 533 Laying of interlocking tiles (labour only) 534 Disposal or malba 535 primaxing carpet 20 mm 536 seal coat 537 earth work in filling 538 45-90 mm gauge stone ballast 539 53-22.4 mm gauge stone ballast 540 stone screening meterial 541 mild steel for rcc work 542 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes 543 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargeb) 20 mm dia. nominal outer dia Pipes 544 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargec) 25 mm dia. nominal outer dia Pipes 545 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charged) 32 mm dia. nominal outer dia Pipes 546 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargee) 40 mm dia. nominal outer dia Pipes 547 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm dia. nominal outer dia Pipes 548 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes 549 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes 550 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. d) 32 mm dia. nominal outer dia Pipes 551 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin- Charge. External work.. a) 15 mm dia. nominal outer dia Pipes 552 b) 20 mm dia. nominal outer dia Pipes 553 c) 25 mm dia. nominal outer dia Pipes 554 d) 32 mm dia. nominal outer dia Pipes 555 e) 40 mm dia. nominal outer dia Pipes 556 f) 50 mm dia. nominal outer dia Pipes 557 g) 62.50 mm dia. nominal outer dia Pipes 558 h) 75 mm dia. nominal outer dia Pipes 559 i) 100 mm dia. nominal outer dia Pipes 560 j) 150 mm dia. nominal outer dia Pipes 561 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in- charge. a) 15 mm nominal bore 562 b) 20 mm nominal bore 563 Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. a) 15 mm nominal bore 564 b) 20 mm nominal bore 565 Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge.High or low pressure with plastic floats: a) 15 mm nominal bore 566 b) 20 mm nominal bore 567 c) 25 mm nominal bore 568 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 a) 15 mm nominal bore 569 Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms. a) 15mm nominal bore. 570 Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to ISI standards IS 8931 a) 15mm nominal bore. 571 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 a) 15 mm nominal bore 572 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in- charge. 573 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White glazed earthen ware(Indian Type)/Neycer W.C. Pan 580 mm Dia. 574 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 575 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern 576 Single half stall urinal with 5 litre PVC. automatic flushing cistern 577 Range of two half stall urinals with 5 litre PVC. automatic flushing cistern 578 Range of three half stall urinals with 10 litre PVC. automatic flushing cistern 579 Range of four half stall urinals with 10 litre PVC. automatic flushing cistern 580 Single squatting plate with 5 litre P.V.C. automatic flushing cistern 581 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern 582 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern 583 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps 584 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 585 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 586 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 587 White Vitreous China Angle back wash basin of size 600x480 mm with single 15 mm C.P. brass pillar tap 588 White Vitreous China Angle back wash basin of size 400x400 mm with single 15 mm C.P. brass pillar tap 589 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 590 Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings. 591 ProvidingandfixingStainlessSteelAISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 592 510x1040 mm bowl depth 250 mm 593 510x1040 mm bowl depth 225 mm 594 510x1040 mm bowl depth 200 mm 595 470x420 mm bowl depth 178 mm 596 Long pattern W.C. pan size of 580 mm 597 Orissa pattern W.C. pan size 580x440 mm 598 Providing and fixing water vitreous china pedestal type (Eurepean type/wash down type) 599 Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in- charge 600 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete.10 litre capacity – white 601 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 602 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete. Semi rigid pipe 32 mm dia / 40 mm dia 603 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 604 Providing and fixing soil, waiste and vent pipes: 100 mm dia Sand cast iron S&S as per IS - 3989 605 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 606 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 75 mm dia meter 607 Sand cast iron S&S as per IS - 1729 608 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 609 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 610 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): 100 mm dia 611 75 mm dia 612 50 mm dia 613 White vitreous china dual purpose W.C. pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend ISI Mark Kajaria eqvilent Indian made Brand. 614 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6 litre (adjustable to 4 litre/ 8 litre), including seat cover and cistern fittings, nuts, bolts and gasket etc complete. ISI Mark Kajaria eqvilent Indian made Brand. 615 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type 616 with common burnt clay (non modular) bricks of class-150 150x100 mm size p type 617 with common burnt clay (non modular) bricks of class-150 618 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg 619 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg 620 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions 621 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter 622 Square shape 450 mm internal dimension 623 Circular shape 500 mm internal diameter 624 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg 625 Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge 626 Painting letters upto 2.5 cm. size including supply of all materials, labour & tools and plants etc. required for proper completion of the work. 627 As in item 817 above but size above 2.5 cm. but upto 8 cm. 628 As in item no. 817 above 8 cm. but upto 15 cm. 629 Repairing letters upto 2.50 cm. size including supply of all meterials labour and tool and plants etc. required for proper comletion of the work 630 As in item NO. 820 above but size above 2.5 cm. but upto 8 cm. 631 As in item NO. 820 above but size above 8 cm. but upto 15 cm. 632 Painting Border line upto 2.5 cm. wide 633 Painting Border line upto 2.5 cm. to 5 cm. wide 634 Re-Painting Border line upto 2.5 cm. wide 635 Re-Painting Border line upto 2.5 cm. to 5 cm. wide 636 Repainting and relettering number plates on ends of parapets of culverts and bridges and boader line in letters height from 2.5 cm. to 8 cm. with approved enamael paint of superior quality including supply of all materials, labour and T & P etx. required for proper completion of the work. 637 Repainting and relettering of K.M. stones as per IRC design (except 5th km. Stone) with approved enemal paint of superior quality including supply of all materials, labour and T & P etc. required for proper completion of the work. 638 As in item 832 above but 5th km. stone 639 As in item 832 above but 200 H.M. stone 640 Varnishing /Painting on chair /side rack with stand and such other items including all matrial labour T&P etc. complite for proper completion of the work. 641 Varnishing /Painting on Double bed including all matrial labour T&P etc. complite for proper completion of the work. 642 Varnishing /Painting on Singal bed/ Sofa/ Dining table including all matrial labour T&P etc. complite for proper completion of the work. 643 Cutting and repairing of walls or windows for fitting of window type A.C. inculding wooden bidding after fixing. 644 White washing and hirmichi washing of culverts and trees upto a distance of 5 M. from the edge of black top in three bends of 1 width at a height of 1 M. from the crown of the road on either side of road. including supply of all materials, labour, T & P etc. required for proper completion of the work. 645 (a) Same as above but with departmental labour 646 Retro-Reflectorised Traffic Signs Direction and place identification signs up to 0.90 sqm Size BoardProviding and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 647 Direction and place identification signsMore then 0.90 sqm Size Board Providing and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 648 Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM. D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 649 Retro Reflective Signs (Type-IV Sheet) for both side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 650 Retro Reflective Signs (Type-IV Sheet) for both side ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 651 Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) 652 b) 60cm equilateral triangle with diffinitation plate size (20cm x 60cm) 653 c) 60 cm Circular with diffinitation plate (20 cm x 60 cm) 654 d) 80mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 655 e) 60mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 656 f) 60 cm x 60 cm square with diffinitation plate ( 20 cm x 60 cm) 657 g) 90 cm high octagon 658 h) 50 x 60 cm single chevron 659 i) 155 x 60 cm Double chevron 660 j) 30 x 90 cm (Left/Right) Object Hazard 661 k) 45 x 90 cm two way Object Hazard 662 l) 30 x 90 cm +45 x 78 cm Guarded/unguarded Railway crossing 663 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of work. 664 Supply, fixing and hoisting of 6.00-7.00 m. spanCantilever Structure in position with one vertical post of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffners & two nos. 8 mm thick MS plates at top welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of the work. 665 Supply, fixing and hoisting of 12.00 - 15.00 M span Overhead Structure in position with two vertical posts of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners & two nos.10 mm thick MS plates at top welded with structure of 50 mm NB (M) pipe comprising of horizontal, vertical pipe of 40 mm NB (M) and bracing pipe of 32 mm NB (M) as per structural design requirements and approved drawing with vertical and lateral clearance given in clause 802.2 and design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of the work. 666 Reflective Raised Pavement Marker Providing and fixing of raised 667 Reflective Raised Pavement Marker with shanks Providing and 668 Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting Type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing Concrite / brick work with 16 Nos Fastner/ screw as per IRC 79-2019 -Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work. 669 Providing & fixing of Bollard made (Single side) out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty,etc all T&P/machine material and labour required for proper completion of work. 670 Supply & fixing of Bollard (Double side) Made out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd. fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of work. 671 Metal Beam Crash Barrier 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 672 Metal Beam Crash Barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2.0 m high, 1.5 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete 673 TREE PLATE S/F Reflective tree plate having Size 15 Cm x15Cm, Consisting type XI sheeting over 1.5mm thick aluminium sheet including labour. Material T&P etc for proper completion of the work. 674 Cartage of Ballast, Kankar, Coal, Grit or Sand etc. including loading and unloading but excluding stackings on pucca roads. I st Km. 675 2 nd Km. 676 3 th Km. 677 4 th Km. 678 5 th Km. 679 6 th Km. 680 7 th Km. 681 8 th Km. 682 9 th Km. 683 10 th Km. 684 11 th Km. 685 12 th Km. 686 13 th Km. 687 14 th Km. 688 15 th Km. 689 16 th Km. 690 17 th Km. 691 18 th Km. 692 19 th Km. 693 20 th Km. 694 21 th Km. 695 22 th Km. 696 23 th Km. 697 24 th Km. 698 25 th Km. 699 26 th Km. 700 27 th Km. 701 28 th Km. 702 29 th Km. 703 30 th Km. 704 31st to 75 Km. 705 76st to 100 Km. 706 100st to 200 Km. 707 As in item (231) above but for cement, steel or other materials : Ist Km. 708 2nd and 3rd Km. 709 4th and 5th Km. 710 6th to 10th Km. 711 11th to 20th Km. 712 21st to 30th Km. 713 31st to 50th Km. 714 51 to 75 Km. 715 76th to 100 Km. 716 101st to 200 Km. 717 201st to 250 Km. 718 As in item (231) above but for tar, bitumen Asphalt, Mobile oil or other such materials 1st Km. 719 2nd and 3rd Km. 720 4th and 5th Km. 721 6th to 10th Km. 722 11th to 20th Km. 723 21st to 30th Km. 724 31st to 50th Km. 725 51st to 75 Km. 726 76th to 100 Km. 727 101st to 200 Km. 728 201st to 250 Km. 729 Cartage of brick/stone ballast, kankar coal shingle or sand etc. by head load upto 90 metres (3 chains) including loading and unloading but excluding stacking 730 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (a) Loading 731 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (b) Unloading 732 Unloading of cement, tar or bitumen drum lighter steel sections and other such materials from wagons and stacking the same on platform. 733 As in item No. 236 (a) above but for heavy articles like joist etc. machinery and unwieldly structures 734 Stacking of bricks on edge in row of two to a height of ten brick and in a length of 100 bricks after dressing levelling of the site as required where bricks are to be stacked. 735 Stacking of coal, surkhi, sand, lime, stone grit, stone/brick ballast & boulders etc. to the required sizes to stacks after necessary dressing of site where such materials are to be stacked. 736 237 (a) above but when the materials are either cement / steel. 737 Loading of cement, tar or bitumen drums, lighter sections of steel and other such materials into wagons. 738 As in item 238 (a) above but for heavy articles like joist, machinery and unwieldly structures. 739 Cartage of R.C.C. Hume pipe 30cm. to 46cm. dia and 1.8 meter to 2.5 metre in length (including collars for which nothing extra will be paid ) including loading and unloading. 1st Km. 740 2nd and 3rd k.m. 741 4th and 5th k.m. 742 6th to 10th k.m. 743 11th to 20 th k.m. 744 21st to 30 th k.m. 745 31st to 50 th k.m. 746 51st to onward k.m. 747 As in item No. 239 (c) above but for R.C.C. Hume pipe 50 to 95 cm. dia and 1.8 meter to 2.5 meter in length carriage to be done by truck or by thela. 1st Km. 748 2nd and 3rd k.m. 749 4th and 5th k.m. 750 6th to 10th k.m. 751 11th to 20 th k.m. 752 21st to 30 th k.m. 753 31st to 50 th k.m. 754 51st to onward k.m.
Contract Date: Jun 15, 2026 Contract Value : Ref. Document
Local Bodies No of Bidders 10
Uttar Pradesh View Result →
10.
Defence #11276668 AOC
Tender For Welcome Maintenance To Omq Area Under Ge (Af) Srinagar.-- Sl. No. Item Description 1 Preparation Of Old Decorated Plastered Or Unplastered Surfaces Of Wall Including Filling Of Holes, Cracks And Undulating Surface With Cement Wall Care Putty Making Surface Even And Smooth And Applying One Coat Of Distemper Oil Emulsion Paint (Obd), Complete All As Specified And Directed 2 Preparation Of Old Decorated Plastered Or Unplastered Surfaces Of Wall Including Filling Of Holes, Cracks And Undulating Surface With Cement Wall Care Putty Making Surface Even And Smooth And Applying Two Coats Of Distemper Oil Emulsion Paint (Obd), Complete All As Specified And Directed 3 Complete Removal Of Existing Treatment From Wall Surfaces And Applying Two Coats Of Oil Bound Distemper Of Approved Colour Including Applying 1Mm Thick Jk Birla Wall Care Putty For Making The Surface Even And Smooth And Filling The Uneven And Small Holes And Making The Edges Of Plaster Properly By Plaster Of Paris Preparatory To Distempering Including Preparation Of Surface By Washing Rubbing Down And Stopping Of Distempered Surfaces, Complete All As Specified And Directed. 4 Preparation Of Old Plastered / Unplastered Old Decorated Surfaces Of Ceiling / False Ceiling, Cornices By Brooming Down Or Steel Brushing, Scraping Down Smoke. Moulds , Moss And Efflorescence Salts, Trading Oil Greasy Spots Etc. And Applying One Coat Of Oil Bound Distemper (Obd), Complete All As Specified And Directed 5 Preparation Of Old Plastered Or Unplastered Ceiling Surfaces And Applying One Coat Of White Wash, Complete All As Specified And Directed. 6 Preparation Of Old Plastered Or Unplastered Wall Surfaces And Applying One Coat Of White Wash, Complete All As Specified And Directed. 7 Preparation Of Old Plastered Or Unplastered Wall Surfaces And Applying Two Coats Of White Wash, Complete All As Specified And Directed. 8 Preparation Of Old Painted Steel & Iron Surfaces Of Any Description Over 10Cm Width Or Girth And Applying One Coat Synthetic Enamel Paint, Complete All As Specified And Directed. 9 Preparation Of Old Painted Wood Surfaces And Wood Based Materials Of Any Description Over 10Cm Width Or Girth And Applying One Coat Synthetic Enamel Paint, Complete All As Specified And Directed. 10 Preparation Of Old Plastered Surfaces Of Wall By Washing Down, Brooming Down Or Steel Wire Brushing Etc. And Applying One Coat Cement Base Paint, Complete All As Specified And Directed. 11 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying Two Coats Of Cement Based Paint Over A Coat Of Primer, Complete All As Specified And Directed. 12 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying Two Coats Of Weather Paint (Apex) Over A Coat Of Exterior Primer, Complete All As Specified And Directed. 13 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying One Coat Of Weather Paint (Apex), Complete All As Specified And Directed. 14 M&L For French Polishing On Surfaces Of Any Description Width Or Girth Including Cleaning And Preparing The Surface Including A Coat Of Wood Filler On New Wooden Works With Two Or More Coats, Complete All As Specified And Directed. 15 S&F In Repairs 32/40 Mm Dia Bore Pvc Flexible Pipe For Wash Hand Basin / Urinal, Complete All As Specified And Directed. 16 S&F In Repairs 15Mm Size Pvc Connections With Ptmt Nuts Of Length 450Mm, Complete All As Specified And Directed. 17 S&F In Repairs Cp Health Faucet Fixed With Spring Action And Lever Along With Flexible Shower Hose With Brass Nut Of Length 1.5M Fitted In The Existing Water Connection In The Toilets, Complete All As Specified And Directed. 18 S&F In Repairs Brass Chromium Plated Tubular Towel Rail 20Mm Dia \D\ Type 60Cm Long Between Flanges, Complete All As Specified And Directed. 19 S&F In Repairs Plastic Water Closet Seat Cover Closed Pattern With Flat Bottom Cover And Mild Steel Chromium Plated Or Aluminized Hinging Device, Complete All As Specified And Directed. 20 S&F In Repairs 15Mm Bore Bib Tap, Cast Copper Alloy, Chromium Plated, With Capstan Handle, Screwed Down, Screwed From Iron Pipe Or For Brass Ferrule, Complete All As Specified And Directed. 21 S&F In Repairs 15Mm Bore Stop Valve / Angle Valve, Cast Copper Alloy, Chromium Plated, Fancy Type, Screwed Down High Pressure With Capstan Head, Complete All As Specified And Directed. 22 S&F In Repairs 15Mm Bore Hot And Cold Water Mixer With Swan Neck For Whb Chromium Plated Quarter Turn Screwed Down, Including Necessary Fittings, Complete All As Specified And Directed. 23 S&F In Repairs 15Mm Size Sink Mixer For Mixing Hot & Cold Water, Cast Copper Alloy Chromium Plated With Capstan Heads, High Pressure, With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe, Complete All As Specified And Directed. 24 S&F In Repairs 15Mm Bore Chromium Plated Wall Mixer 3-In-1 System Wall Mixer With Overhead And Hand Shower Arrangement With Connecting Legs, Wall Flanges And Wall Bracket For Hand Shower, Complete All As Specified And Directed. 25 S&F In Repairs 10 Litre Capacity Pvc Valveless, Syphonic Action Type, Flushing Cistern Low Level, White With Inlet Ball Valve, Float And Handle Including Brackets And Pvc Flush Pipe Etc., Complete All As Specified And Directed. 26 S&F In Repairs 5.5Mm Thick Sheet Glass Shelf Assembly Consisting Sheet Glass, Chromium Plated, 600Mm Long And 120Mm Wide With Chromium Plated Brackets, Guard Bar And Railing, Complete All As Specified And Directed. 27 S&F In Repairs Vitreous China Wash Hand Basin, White Flat Back, Size Of 550X400Mm Including Cutting For And Pinning In Ends Of Brackets (Including Supply And Fixing Of Brackets) Or Erecting Stand, 32Mm Brass Chromium Plated Waste Fitting With Long Screwed Shank And Fly Nut Flangedend Bedded In Red Led Cement, Chain And Plug And Porcelain Stopper, Complete All As Specified And Directed. 28 S&F In Repairs For 15Mm Bore Tubes, Medium Grade, Galvanised, With All Fitting, ( Such As Bends, Elbows, Tees, Short Pieces, Connectors, Back Nuts, Diminishing Pieces, Caps, Plugs, Unions Etc.) And Fixed Complete To And Ceiling With Clips, Wall Hooks, Wooden Plugs Or Laid In Floors Including Screwing And Waste And For Forged Bends On Piping As Required, Complete All As Specified And Directed. 29 S&F In Repairs For 20Mm Bore Tubes, Medium Grade, Galvanised, With All Fitting, ( Such As Bends, Elbows, Tees, Short Pieces, Connectors, Back Nuts, Diminishing Pieces, Caps, Plugs, Unions Etc.) And Fixed Complete To And Ceiling With Clips, Wall Hooks, Wooden Plugs Or Laid In Floors Including Screwing And Waste And For Forged Bends On Piping As Required, Complete All As Specified And Directed. 30 S&F 500 Litres Capacity Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Including Dismantling Existing Water Tank And Removing From Site, Complete All As Specified And Directed. 31 Cleaning And Removing All Scale And Dirt, Etc. From Tanks And From Mouths Of Circulating Pipes, Etc Of Capacity Upto 500 Litres And Refixing The Float Valve And Plugging Wash Pipe, Complete All As Specified And Directed. 32 Cleaning And Removing All Scales And Dirt Etc. From Tanks And From Mouths Of Circulating Pipes Of Capacity Exc 500 Litres But N Exc 1000 Litres And Refixing The Float Valve And Plugging Wash Pipe, Complete All As Specified And Directed. 33 S&F In Repairs Cabinet Mirror Of Size 450X600Mm, Complete All As Specified And Directed. 34 Taking Down And Refixing Of Shutters In Same Opening After Easing And Adjusting Of Any Description Exc 1 Sqm And N Exc 2 Sqm Each Including Resecuring/Changing Of Builders Hardware, Complete All As Specified And Directed. 35 Taking Down Aluminium Door / Window Shutter Of Any Size N Exc 2.5 Sqm Each And Refixing In The Same Position / Opening After Easing And Adjusting, Tightening Of Joints Or Changes Of Hinges, Screws, Cleats, Beadings, Rubber Gasket Etc, As Per Site Requirement To Make Functional The Shutter, Complete All As Specified And Directed. 36 Taking Down Shutters Of Any Description Size Of Shutter Exc 1 Sqm But N.Exc 2 Sqm And Removing From Site Complete All As Specified And Directed. 37 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) N Exc. 1.5 Sqm And Credited To The Contractor, Complete All As Specified And Directednote: The Damaged Portion Of The Tiles / Rendering Shall Be Made Good With The Same Material To Match With The Adjacent Surface. 38 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc. 1.5 Sqm But N Exc 4.0 Sqm And Credited To The Contractor, Complete All As Specified And Directednote: The Damaged Portion Of The Tiles / Rendering Shall Be Made Good With The Same Material To Match With The Adjacent Surface. 39 S&F Pressed Steel Frame For Doors With One Rebates Size Of Frame 125X60 Mm Including Necessary Fixing Lungs Hinges Lock Strike Plate Etc. Including Pcc, 1:3:6, Type C-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Back Filling Of Pressed Steel Frame, Complete All As Specified And Directed. 40 S&F Pressed Steel Frame For Doors With One Rebates Size Of Frame 105X60 Mm Including Necessary Fixing Lungs Hinges Lock Strike Plate Etc. Including Pcc, 1:3:6, Type C-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Back Filling Of Pressed Steel Frame, Complete All As Specified And Directed. 41 S&F Anodised Aluminium Powder Coated Door Shutter With Frame (Minimum Thickness Of Powder Coating 50 Micron Of Approved Colour), Partly Glazed With 5Mm Thick Tinted Glass And Partly Panelled With 9Mm Thick Prelaminated Particle Board With Both Side Decorative Laminated Including Rubber Bead Joining Cleat For Fixing In Position, Aluminium Door Handle 150Mm Size, Aluminium Barrel Tower Bolt 200Mm Size, Mortice Lock Etc. All As Specified Below, Complete All As Specified And Directed. (A) Frame (Top & Side) Section Shall Of Size 101.60 X 44.75 X 2.4Mm (Section No 14021)(B) Vertical Members Of Shutter Section Shall Be Be Of Size 85.00 X 44.45 X 2.00Mm (Section No 19560)(C) Top Members Of Shutter Section Shall Be Be Of Size 83.50 X 44.45 X 2.00Mm (Section No 19581)(D) Lock Rail (Middle Member) Of Shutter Section Shall Be Be Of Size 150.00 X 44.45 X 3.00Mm (Section No 19596)(E) Bottom Members Of Shutter Section Shall Be Be Of Size 150.00 X 44.45 X 3.10Mm (Section No 19584) (F) Glazing Clip For Securing Glass Of Shutters Shall Be Be Of 0.80Mm Thick (Section No 19370).Note:- (I) Section No Given Above Are Of Make Jindal, Contractor May Use Similar Section Of Other Make Mention In Appx A(Ii) Floor Door Spring Will Be Measured & Paid Separately. 42 S&F Aluminium Powder Coated Aluminium Window Having Three Track (Minimum Thickness Of Powder Coating 50 Micron) With Aluminium Section 92Mm X 31.75Mm (Weight Bottom Section 1.070 Kg/M, Top Section 0.933 Kg/M, Shutter Section 40Mm X 18Mm (Weight Of Handle Section 0.417 Kg/M) Interlock 0.547 Kg/Rm Mounted On Bearing To Slide On Tracks Plain Anodized In Approved Shade Including Supply And Fixing Of 5Mm Thick Plain Glass And Wire Mesh, Pvc Track Gasket, Epdm Rubber Gasket On Glass Of Weather Tightening Along With Locks, Handle Including Sealing Gap With Marble Surfaces With Silicon Sealants Making It Water Proof In All Manner Etc. Complete All As Specified And Directed. 43 S&F Aluminium Powder Coated Ventilator (Minimum Thickness Of Powder Coating 50 Micron) Having Fixed Glass With Aluminium Section Having Section 50.80Mm X 25.40Mm (Weight 0.489 Kg/M) Glazing Clear Section (Weight 0.109 Kg/M) With Plain Anodized Including Supply And Fixing Of 5Mm Thick Sun / Heat Reflected Glass Making Frame And Glass Water Tightening Making It Good Etc., Complete All As Specified And Directed. 44 S&F For Powder Coated Aluminium Grill (Thickness Or Powder Coating Not Less Than 50 Micron) Of Approved Design / Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass / Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Powder Coated Aluminium Standard Section Around The Opening, Complete All As Specified And Directed. 45 S&F Upvc Windows With, Glass 5Mm Thick Clear Tough + 12Mm Thick A, G+5Mm Clear Toughened, Profile-Mozart Premium, Colour-White, Drainage, Face, Reinforcement Standard, T-Joints, Mechanical /V-Welded, Bead-Default, Mesh-Pull Down, Handle Type Cocksper Handle, Complete All As Specified And Directed. 46 S&F 4.8Mm Thick Sheet Glass Ordinary Quality And Glazing With Aluminium Glazing Clips And Rubber Neosprine Gasket In Square Or Rectangular In Section N Exc 0.5 Sqm In Each Pane, Complete All As Specified And Directed. 47 S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Supplying And Fixing In Opening, Complete All As Specified And Directed. 48 S&F 30Mm Thick Factory Made Solid Pvc Moulded Door Shutter With Wood Free Eps, 28 To 30Mm Thick (Stiles), With 2, 4 Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face And 2Mm Thick Plain Colour Pvc Sheet On Back Face, Suppling And Fining In Frame At Site As Per Specification And Drawing 49 S&F 35Mm Thick 2Nd Class Hardwood, Factory Made, Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc. (Without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass, Etc. Sizes Of Members Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A), Complete All As Specified And Directed. 50 S&F 35Mm Thick 2Nd Class Hardwood Plain Framed, Panelled Shutter (Two Panel), Factory Made, With Lock Rail And Panel Of 9 Mm B.W.P. Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 (Part I), Kiln Seasoned And Chemically Pressure Treated, Complete All As Specified And Directed. 51 S&F In Repairs 250Mm Mild Steel Helical Door Spring Rat Tail Type Including Collar Plate And Welding If Required Or Otherwise Fixed With Screw On Wooden Frames, Complete All As Specified And Directed. 52 S&F 150Mm Size Aluminium Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And Directed. 53 S&F 100Mm Size Aluminium Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And Directed. 54 S&F 150Mm Size Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed. 55 S&F 100Mm Size Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed. 56 S&F 100Mm Long Medium Weight, Cold Rolled Mild Steel Butt Hinges, Complete All As Specified And Directed.. 57 S&F 100Mm Long Floor Door Stopper Of Aluminium Alloy Body And Tongue With Rubber Cover Ends, Complete All As Specified And Directed. 58 S&F 250Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts, Complete All As Specified And Directed. 59 S&F Mild Steel Wire Cloth 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 In Steel / Wooden Shutter Of Door & Windows, Complete All As Specified And Directed. 60 S&F 3Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty / Wooden Beading In Squares Not Exceeding 0.50 Sqm Including Hacking Old Glass, Complete All As Specified And Directed. 61 S&F Door Strip Comprising Of Aluminium Holds & Rubber Strip Fixed At Bottom Of Door Shutter With Screws, Complete All As Specified And Directed. 62 S&F In Repairs 18-19Mm Thick Block Board, Grade-2 Quality, Interior Grade, Commercial Type, Fixed With Screws To Timber Framework As In Kitchen Drawers, Cupboard Shutters Etc. Complete All As Specified And Directed. 63 S&F 0.90Mm Thick Decorative Laminate Type 1 Of Surface Finish, Colour And Pattern As Approved, Fixed With Approved Adhesive As Per ManufacturerS Instructions, Complete All As Specified And Directed. 64 S&F 30Mm Width Of Flaps Continuous (Piano) Hinges, Stainless Steel, Bright Finish Or Electro Galvanised, Complete All As Specified And Directed. 65 S&F In Repairs 100Mm Long Hasp And Staple, Safety Type, Brass Aluminium Anodized With Mild Steel Hinge Pin Including Bolt To Hinge Plote And Fixed With Screw, Complete All As Specified And Directed. 66 S&F In Repairs Sink With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X160Mm, Complete All As Specified And Directed. 67 S&F In Repairs Kitchen Plate Rack Made Of Stainless Steel 1Mm Thick With Plugs Washers As Overall Size Of 900Mm X 975Mm Including Fixing To Wall And All Accessories, Complete All As Specified And Directed. 68 S&F In Repairs 9Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work Or Wall Panelling / Flooring / Ceiling, Complete All As Specified And Directed. 69 Preparation Of New Wood And Wood Based Surfaces Of Any Description Exc 10Cm With Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer, Complete All As Specified And Directed. 70 S&F In Repairs Snap Grid For False Ceiling Of Size 600Mm X 600Mm Grid Exposed Grid System Fabricated With Galvanised Iron Powder Coated Section All As Shown On Serial Page No 185 Of Ssr Part Ii (2020 Print), Complete All As Specified And Directed. 71 S&F 12Mm Thick Perforated Particle Boards Or Tiles For Insulation And Acoustic Purposes, 60Cm X 60Cm In Size, Fixed With Nails To Timber Frame Workorwith Staples On Snap Grid, Complete All As Specified And Directed. 72 S&F 6Mm Thick Non Asbestos Fibre Cement Building Boards Fixed Or Laid/Inserted To Timber /Gi / Aluminium Framework With Screws To Ceiling Flat Or Sloping, Complete All As Specified And Directed. 73 S&F In Repairs 12Mm Thick Wooden Wall Panelling Of Second Class Softwood With Tongue And Groove Joint Fixed In Any Position Over And Including Wooden Framework In Second Class Softwood With Plain Fillets Square Or Sectional Area Exc 13 Sqcm And N Exc 25 Sqcm At N Exc 90 Cm Centre To Centre In Both Direction And Including Two Or More Coats Of French Polishing On All The Exposed Surfaces Wooden Panelling Including Taking Down Existing Electrical Fittings And Re-Fixing The Same, Complete All As Specified And Directed. 74 S&F In Repairs Solid Pvc Wall Lining Consisting Of 5Mm Thick Wood Grain Printed Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame Including 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specifications,Complete All As Specified And Directed. 75 S&F In Repairs Decorative Type Wallpaper Of Good Quality Surface Finish, Colour ,Design And Pattern As Required Fixed With Approved Adhesive As Per ManufacturerS Instructions As Approved, Complete All As Specified And Directed. 76 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For, Complete All As Specified And Directed. 77 M&L For Structural Steel Work As In Truss, Rafter Purling, Made Out Of Angle / Hollow Pipe / Tube Section Including Jointing Cleats, Plates Flat Iron, Gusset Plates, Rails, Braces Etc. Conforming To Fe 410-W (Gde-E-250) Quality, Confirming To Is-1161-1979 Of Grade St-240 Complete All As Specified And As Directed. 78 S&F In Repairs 0.63Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap, With L-Type Or J-Type Or Cranked Hook Bolts, In Roofs, Walls Etc. With Grade Of Zinc Coating, Complete All As Specified And Directed. 79 S&F In Repairs Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws, Complete All As Specified And Directed. 80 S&F In Repairs Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws, Complete All As Specified And Directed. 81 M&L For Tightening Bolts And Closing Bolt Holes, Etc. To Rectify The Leakage / Seepage, In Old Roof Of Corrugated Steel Sheets By Sealing With One Bitumen And One Curved Gi Washer On Either Side And 6Mm G.I. Bolts And Nuts If Required, All Set In Stiff White Lead, Complete All As Specified And Directed. 82 Preparing New Zinc (Or Galvanised) Surfaces To Receive Painting Of Any Description Over 10Cm Width Or Girth, By Coating With Mordant Solution Including Washing And Cleaning, Etc. Steel And Iron Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over One Coat Red Oxide Primer, Complete All As Specified And Directed. 83 Preparation Of Old Zinc (Or Galvanised) Steel And Iron Roof Surfaces Of Any Description Over 10 Cm Width Or Girth To Receive Painting, By Coating With Mordant Solution Including Washing And Cleaning Etc. And Applying Two Coats Of Synthetic Enamel Paint, Complete All As Specified And Directed. 84 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc., Complete All As Specified And Directed. 85 M&L For 18-20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Jambs, Pillars, Window Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Over And Including 15Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 86 Demolition Of Reinforced Cement Concrete Of Any Description In Any Position Not Otherwise Specifically Provided For, Complete All As Specified And Directed. 87 Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work For Fair Finished Surface, Not Exceeding 200M Thick (Horizontal Or Sloping), Complete All As Specified And Directed. 88 M&L For Reinforced Cement Concrete, 1:2:4, Type B-1 (Using 20 Mm Graded Crushed Stone Aggregate) For Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like, Complete All As Specified And Directed. 89 M&L For Ms Tmt Bars 10Mm Dia And Over, Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hooking For Columns, Hooking Ends And Binding With And Including Mils Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips, Complete All As Specified And Directed. 90 S&F In Repairs 20Mm Dia Decorative Powder Coated Drapery Curtain Rods Of With Bright Finish, Including Decorative Side Domes, Brackets And A Minimum Of 8 Nos Curtain Rings In Per Running Metre Of Length, Complete All As Specified And Directed. 91 Demolition Of Brick Work Or Stone/ Boulder Masonry, Built In Cement Mortar Including All Quoins, Pillars Etc. Complete All As Specified And Directed. 92 M&L For Brick Work With Sub-Class `B Bricks (Using Old Size Bricks), Straight Or Curved On Plan Exceeding 6M Mean Radius Built In Cm 1:6, Complete All As Specified And Directed. 93 Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Etc., Complete All As Specified And Directed. 94 M&L 15Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 And Finishing Even And Smooth Without Using Extra Cement Using Integral Water Proofing Compound, Complete All As Specified And Directed. (Wpc Shall Be Measured And Paid Separately). 95 Supply Only Integral Water Proofing Compound, Complete All As Specified And Directed. 96 M&L For Rendering 15Mm Thick On Other Than Fair Faces Of Brick Or Concrete Surfaces In Cement Mortar 1:6, Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 97 Preparation Of New Surface Of Wall And Applying Two Coats Of Cement Base Paint Over One Coat Of Primer, Complete All As Specified And Directed. 98 Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Alkali Resistant Primer, Complete All As Specified And Directed. 99 M&L For Lagging To 15Mm Bore Pipes Used In External Water Supply Or Plumbing All Around With 50Mm Thick Bonded Mineral Wool Pre-Formed ‘Snap On’ Pipe Sections Of Density 144 Kg /Cum Conforming To Is 9842 Provided With Chicken Mesh Wire Netting 25Gauge 20Mm Mesh Including Applying With Brushing Neat Cement Slurry With 3 Kg Of Cement Per Sqm Including Taking Down Of Old Lagging If Required, Complete All As Specified And Directed. 100 M&L For Lagging To 20Mm Bore Pipes Used In External Water Supply Or Plumbing All Around With 50Mm Thick Bonded Mineral Wool Pre-Formed ‘Snap On’ Pipe Sections Of Density 144 Kg /Cum Conforming To Is 9842 Provided With Chicken Mesh Wire Netting 25Gauge 20Mm Mesh Including Applying With Brushing Neat Cement Slurry With 3 Kg Of Cement Per Sqm Including Taking Down Of Old Lagging If Required, Complete All As Specified And Directed. 101 S&F In Repairs 75Mm Dia Pvc (Swr) Soil Waste And Vent Pipes Single Socketed In Any Length With Rubber Ring Joints, Laid In Trenches Or Fixed To Walls, Complete All As Specified And Directed 102 S&F In Repairs 110Mm Dia Pvc (Swr) Soil Waste And Vent Pipes Single Socketed In Any Length With Rubber Ring Joints, Laid In Trenches Or Fixed To Walls, Complete All As Specified And Directed 103 M&L For Cleaning Surface Of Sunken Portion Wall / Bottom And Applying Cement Slurry @1.2 Kg Per Sqm And Applying 15Mm Thick Cement Plastred In Cm 1:3 Finished Even And Fair Using Extra Cement And Applying Two Coats Of Acrylic Polymer Modified Cementious Slurry As Per Manufactureas Instruction To Make The Surface Leak Proof, Complete All As Specified And Directed. 104 S&F In Repairs Vitreous China Wash Down Water Closet Pan (Pedestal Pattern), White (Excluding Flushing Cistern ) Including Connection To Drain (Or Outgoing Pipe) And To Flushing Pipe, Antisyphonage Pipe, Pvc Cover Sheet In Same Colour Etc., Complete All As Specified And Directed. 105 Dismantling Of Floor Hearth Or Wall Tiling Including Cement Mortar Bedding But Not Backing Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. 106 Demolition Of Cement Concrete In Ground Floors And Pavings N Exc 15Cm Thick (Below Or Above Ground Level), Complete All As Specified And Directed. 107 M&L For 25Mm Thick Plain Cement Concrete, 1:2:4, Type B-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Sub Base Of Floor Finish Even And Rough To Receive Further Floor Finishes (Tile/Kota Stone/ Marble ), Complete All As Specified And Directed. 108 M&L For 100Mm Thick Plain Cement Concrete, 1:2:4, Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Flooring , Laid In Alternate Bays And Finishing The Surface Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 109 M&L For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match Over And Including 15Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 110 M&L For Glazed Ceramic Tile 300X600X06-7Mm Thick (Coloured) On Vertical Surfaces Such As Wall, Dados Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tiles Over And Including 10Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 111 M&L For Light Shade Vitrified Ceramic Tiles 8 To 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15 Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 112 M&L For Light Shade Vitrified Ceramic Tiles 8 To 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Backing Coat Cm 1:4, Complete All As Specified And Directed. 113 M&L For 75Mm Thick Plain Cement Concrete, 1:4:8, Type D-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Sub Base, Complete All As Specified And Directed. 114 M&L For 100Mm Thick Plain Cement Concrete, 1:4:8, Type D-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Sub Base, Complete All As Specified And Directed. 115 M&L For 10Mm Thick Vitrified Parking Tiles Heavy Duty, Exterior Grade, Textured Finished Of Size 300X300Mm Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:4, Complete All As Specified And Directed. 116 M&L For Chequered Cement Concrete Tiles Size 300 Mm X 300 Mm X 22-25Mm Thick With Grey Cement And Pigment , Rubber Moulded With Laquer Polish For Extra Shine, Isi Marked, Coloured, Set Jointed And Pointed In Neat Cement Slurry Over And Including 20Mm Thick Screed Bed In Cm 1:6, Complete All As Specified And Directed. 117 M&L For Strong Silicone Sealant Suitable For Roof Leak Hole, Metal Leak, Gap Filling Etc. Hole Size N Exc 5X5Mm Including Necessary Fitting And Scaffolding Height Upto 15M, Complete All As Specified And Directed. 118 S&F In Repairs Pvc Syphon Kit For One Piece, Complete All As Specified And Directed. 119 S&F In Repairs One Piece Closet Seat Cover Closed Pattern With Flat Bottom Cover And Mild Steel Chromium Plated Or Aluminized Hinging Device, Complete All As Specified And Directed. 120 S&F In Repairs 100Mm Dia Cp Grating Doom, Complete All As Specified And Directed. 121 Deduction To Be Made From Boq For Schedule A Part-Ii (Credit Schedule From Dismantling / Taking Down Items) Worth Rs 65,905.00 During Aoc.(Note :- Tenderers Shall Not Quote For This Schedule) Please Enable Macros To View Boq Information
Contract Date: Jun 29, 2026 Contract Value : 19.33 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu And Kashmir View Result →
11.
Educational and Research Institute #11249071 Price Bid
Tender For supply of Drugs Consumables And Surgical Items In Bmc Sagar , Ibuprofen(200 Mg),Tablet , Clomiphene Citrate(50 Mg Tab),Tablet , Cyproterone Acetate (2Mg) + Ethinyl Estradiol(0.035Mg),Tablet , Disulfiram(250 Mg),Tablet , Ethinylestradiol (A) + Levonorgestrel (B), [0.03 Mg (A) + 0.15 Mg (B)](With Ferrous Fumarate 75 Mg),Tablet , Ethinylestradiol(Tablet 0.01 Mg),Tablet , Ethinylestradiol(Tablet 0.05 Mg 10X10),Tablet , Levonorgestrel Emergency Contraceptive(0.75Mg),Tablet , Micronised Progesterone(100 Mg),Tablet , Mifepristone-200Mg (1 Tab)+Misoprostol-200Mcg (4 Tab)(Combipack),Tablet , Misoprostol(100 Mcg 4 Tables / Pack),Tablet , Norethisterone(5Mg),Tablet , Sodium Valproate + Valproate(333 Mg + 145 Mg),Tablet , Acetaminophen 1000 Mg/100 Ml(10 Mg/Ml),Injection , Dextrose 25%(500Ml Ffs Bottle),Injection , Glycine Irrigation Solution(1.5% 3000 Ml Iv),Fluid , Linezolid(200Mg / 100Ml ),Infusion , Sodium Chloride N/2 Injection Ip (0.45%)(500Ml Ffs Bottle),Injection [110399] , Dacarbazine Usp 200 Mg(10Mg/Ml),Injection [202207215] , Amoxycillin And Potassium Clavulanate I.P.(1 Gm + 0.2 Gm /10 Ml Vial),Injection [120021] , Betahistine(16 Mg),Tablet [110401] , Carboplatin(150Mg 15 Ml Vial),Injection [120056] , Cefixime 200 Mg + Clavulanic Acid 125 Mg(Tab),Tablet , Cefoperazone 500Mg + Sulbactam 500Mg(Vial),Injection [120067] , Ceftriaxone 1000Mg + Sulbactam 500Mg(Vial),Injection [120325] , Cefuroxime( 250 Mg),Tablet [120432] , Cefuroxime( 500 Mg),Tablet [120431] , Cepodoxamine 200 Mg + Clavulanic Acid 125Mg Tab(200Mg + 125 Mg),Tablet [121197] , Clindamycin(1% W/W 10 Gm),Gel [120329] , Epirubicin(50Mg Vial),Injection [120121] , Imatinib Cap/Tab(100 Mg),Tablet Or Capsule [120165] , Ketoconazole Ointment 2% 15Gm Tube(15 Gm),Ointment [4460030] , Omeprazole 40Mg(Vial),Injection [120231] , Ursodeoxy Cholic Acid 300 Mg Tab [700392] , Vitamin D3 Granules(60000 Iu Sachet),Powder [120715] , Amikacin(100Mg / 2Ml Vial),Injection [110068] , Betamethasone 0.1%, 5Ml(5Ml),Drop [201135] , Carboxymethylcellulose Eye Drop Ip 1% W/V 10Ml Vial(Sodium Cmc Also Accepted),Eye Drop [1100336] , Cefotaxime Sodium(1 Gm Vial),Injection [110094] , Cefuroxime(1.5 Gm),Injection [140076] , Ciprofloxacin 0.3%(5Ml Vial),Eye And Ear Drop [202210020] , Ciprofloxacin 0.3%(5Ml Vial),Eye Drop [110330] , Diclofenac Sodium 75Mg Intended To Use Iv - Aqueous Formulation(1Ml Amp/Vial),Injection [202109030] , Dicyclomine(10Mg/Ml (2 Ml Amp)),Injection [110279] , Etiophylline And Theophylline(220 Mg/2Ml),Injection [110375] , Gentamicin Inj(40 Mg/Ml 2 Ml Amp),Injection [110114] , Hydrocortisone Sodium Succinate(100 Mg/Vial),Injection [110039] , Levetiracetam(250 Mg),Tablet [120655] , Lignocaine 2 %(21.3 Mg / Ml (30 Ml Vial)),Injection [110006] , Meropenem 250 Mg / Vial(250Mg/Vial),Injection [700502] , Mometasone 0.10% Ointment/Cream(Mometasone Furoate Also Acceptable),Ointment [120533] , Moxifloxacin 0.5% W/V(5 Ml),Eye Drop [120534] , Ondensetron(4Mg/2Ml, 2Ml Amp),Injection [140090] , Paracetamol 150 Mg/Ml(15 Ml Bottle With Dropper),Drop [110028] , Pentaprazole Inj Vial(40 Mg),Injection [110275] , Promethazine Inj 25 Mg/Ml (10 Ml Vail)(10 Ml Vail),Injection Solution For [4350207] , Ranitidine(50Mg/2Ml , 2Ml Amp),Injection [110278] , Tobramycin(0.3% 5Ml),Eye Drop [120293] , Xylometazoline(0.05% 10Ml),Nasal Drop [202109079] , Linezolid 200Mg/100Ml(100Ml Ffs Bottle),Injection [120182] , Amikacin(100Mg / 2Ml Vial),Injection [110068] , Atropine Sulphate 0.6 Mg/Ml Sc/Im/Iv(2Ml Amp),Injection [110012] , Dicyclomine(10Mg/Ml (2 Ml Amp)),Injection [110279] , Etiophylline And Theophylline(220 Mg/2Ml),Injection [110375] , Frusemide(10 Mg/Ml (2 Ml Amp)),Injection [110266] , Methyl Prednisolone Sodium Succinate Inj( Usp - 125Mg ),Vial [4350112] , Paracetamol Inj(150Mg/Ml 2Ml Amp(2Ml Amp)),Injection [110029] , Tramadol(100Mg/Ml (2 Ml Amp)),Injection [120609] , Calamine Lotion((Contains Per 1000 Ml:- Calamine 150 Gm,Zinc Oxide 50 Gm, Bentonite 30 Gm, Sodium Citrate 5Gm, Liquified Phenol 5Ml, Glycerin 50 Ml Purified Waterfreshly Boiled And Cooled To Produced 1000Ml) 50 Ml Bottle),Lotion [110258] , Drotaverine(80 Mg),Tablet [700527] , Latanoprost Eye Drop(0.005%, 2.5Ml),Drop [120896] , Metronidazole Oral Suspension(200 Mg/5Ml (60 Ml Bottle)),Suspension [110136] , Phenylephrine Hydrochloride,(10 Mg/Ml),Injection [202207316] , Quetiapine(50 Mg),Tablet [120582] , Rabeprazole 20 Mg + Domperidone 10Mg(10 X 10),Tablet [120999] , Sodium Valproate(200Mg),Tablet [110066] , Travoprost Ip(0.004% W/V,),Eye Drop [202207369] , Piracetam(200Mg),Injection [202207317] , Piroxicam(20 Mg/Ml),Injection [202207318] , Pancreatin 170 Mg+Oxbile Extract 50 Mg + Ginger Oleoresin 2 Mg+Activated Charcoal 50 Mg(Tab)(Tablet (With Additional Content Acceptable)),Tablet [120902] , Cyclopentolate 1% W/V(5 Ml),Eye Drop [120456] , Moxifloxacin 0.5% +Loteprednol 0.5% W/V(0.5%+0.5% W/V),Eye Drop [202207298] , Nepafenac(1Mg/Ml),Eye Drop [120685] , Prednisolone(1% Eye Drop),Drop [202209079] , Proparacaine(0.50% 5 Ml /Vial),Eye Drop [120575] , Sodium Hyaluronate (Intraocular)(1% /Ml),Injection [202111019] , Amitriptyline(10 Mg),Tablet [120408] , Chlorhexidine Gluconate Mouthwash 0.2% W/V Solution(50Ml Bottle ),Solution [110248] , Clobetasol Propionate 0.05%(15 Gm Tube),Cream [120443] , Domperidone(1 Mg/ Ml 10 Ml With Dropper),Drop [120472] , Drotaverine(40 Mg),Tablet [110343] , Ondansetron(2Mg/5Ml 30Ml Bottle),Syrup Or Solution [110292] , Paraffin Liquid(Liquid Paraffin 1.25Ml + Milk Of Magnesia 3.75Ml + Sodium Picosulphate 3.33Mg),Syrup [4700084] , Sucralfate(1Gm/5Ml),Syrup Or Suspension [140073] , Sucralfate 500Mg + Oxetacaine 10 Mg/5Ml Syrup/Suspension, 200Ml Bottle(500Mg+10/5Ml),Bottle [202109073] , Tranexamic Acid + Mefenamic Acid (500Mg + 250Mg),Tablet [140051] , Vitamin D3(800Iu/Ml),Drop [202109140] , Caffeine Citrate Inj(20Mg/Ml 3 Ml Amp/Vial ),Injection [987622] , Magnesium Sulphate Injection(I.P.50 % W/V 10 Ml Amp),Injection [120186] , Menadione Usp (Vitamin K3)(10 Mg/Ml (1 Ml Amp)),Injection [120192] , Vitamin B12 500 Mcg /Ml 10 Ml Vial(10 Ml Vial),Injection [120614] , Reusable Flexible Hollow Co2 Fiber(Dedicated Specially For Stapedotomy, One Shot, Stapedotomy, Glomus Tumor, Tymponostomy),Consumable [202403001] , Alfacalcidiol Capsule(0.25 Mcg (Soft Gelatin Capsule Also Acceptable)),Capsule [120315] , Clotrimazole (200Mg) + Clindamycin (100Mg)(Vaginal ),Pessary [202312001] , Vitamin A Cap Usp Soft Gelatin Capsule( 2 Lakh Iu),Capsule [120307] , Vitamin-E Usp(400 Mg),Capsule [120721] , Aspirin Low Dose(75Mg Tab),Tablet [110022] , Deferasirox Dispersible(100Mg),Tablet [120101] , Deferasirox Dispersible(500Mg),Tablet [110200] , Hydroxychloroquine(200 Mg),Tablet [20200301] , Sitagliptin(50 Mg),Tablet [120272] , Desflurane(240 Ml),Bottle [202207220] , Amoxicillin Trihydrate Dispersible 125 Mg Tab(125 Mg),Tablet [700405] , Artesunate Powder For Injection 120 Mg(Vial Of 1 Powder Injection With Appropriate Diluents),Injection [202209015] , Pralidoxime Chloride Injection I.P.-1Gm(20 Ml),Injection [120258] , Amphotericin B Inj Ip 50 Mg(Liposomal Amphotericin B Also Acceptable),Injection , Anti D Immunoglobulin For Iv/Im Use (Monoclonal)(150Mcg (1Ml Vial)),Injection [110312] , Anti Thymocyte Globulin (250Mg/5Ml),Injection [202109153] , Human Anti D. Immunoglobulin (Monoclonal)(300Mcg/Vial),Injection [110313] , Human Chorionic Gonadotropin(Injection 5000 Iu Vial Of 2 Ml Injection),Injection [202209063] , Leuprolide Depot Inj(3.75Mg),Injection [700758] , Rabies Immunoglobulin Inj-300 Iu((2Ml Vial / Pfs)),Injection [110315] , Tetanus Immunoglobulin(Usp/Ip 250 Iu/Vial),Injection [110317] , Glargine 100 Iu /Ml, 3Ml Cartridge Inj. (Firm Has To Supply One Compatible Pen With Every 20 Cartridges As And When Required Without Any Extra Cost)(100 Iu /Ml),Cartridges , Human Insulin Regular/Soluble(100Iu/Ml (10Ml Vial)),Injection [120708] , Human Insulin Regular/Soluble(40Iu/Ml (10Ml Vial)),Injection [110300] , Insulin Biphasic 30/70((30% Soluble Insulin & 70% Isophane Insulin) 100 Iu/Ml. 10 Ml Vial),Infusion [202209090] , Premix Insulin 30:70(40 Iu/Ml),Injection [202209088] , Chlorpheniramine Maleate(4Mg),Tablet [110048] , Sulfamethoxazole +Trimethoprim Suspension (200 Mg + 40 Mg) / 5 Ml Suspension(50 Ml Bottle),Suspension [110132] , Sulfamethoxazole +Trimethoprim Tab(200 Mg + 40 Mg),Tablet [110131] , Point Of Care Test Kit (Poct) For Sickle Cell Diagnostics(As Per Attached Specification),Consumable [202403003] , Td (Tetanus Diphtheria) Vaccine (Adsorbed) (For Adults And Adolescents As Per I.P.),Vaccine [202209092] , Dextrose(10% Inj 500 Ml Ffs Btl),Injection [110386] , Dextrose(25% 100 Ml Ffs Bottle),Injection [110387] , Normal Saline(0.9% (500Ml Ffs Bottle)),Infusion [110395] , Sodium Chloride Normal Saline(100Ml Ffs Bottle),Infusion [110396] , Albendazole Ip(400Mg),Tablet [110141] , Iron Folic Acid Sugar Coated (Blue Tablet) Ferrous Sulphate Ip Equivalent To 60 Mg Elemental Iron & 500 Mcg Folic Acid Ip(60 Mg + 500 Mcg),Tablet [110407] , Iron Folic Acid Sugar Coated Tablet Dried Ferrous Sulphate Ip Eq. To 45Mg Ferrous Iron And 400Mcg Folic Acid Ip (Pink Coloured Tab) -Wifs Junior Ifa Tablets (Detail Specification As Per Tender)(45Mg + 400Mcg),Tablet [110409] , Metformin(500 Mg),Tablet [110302] , Paracetamol(500Mg),Tablet [110027] , Zinc Dispersible(20Mg),Tablet [110421] , Empagliflozin(10Mg Tab),Tablet [120940] , Empagliflozin(25Mg Tab),Tablet [120941] , Linagliptin 2.5Mg+Metformin 500Mg(Tab),Tablet [120992] , Alprazolam(0.5Mg),Tablet [110365] , Atorvastatin(Ip 10 Mg),Tablet [110238] , Azithromycin(250Mg),Tablet [110083] , Azithromycin(500Mg Tab),Tablet [110084] , Clomipramine 25 Mg(Tablet),Tablet [120446] , Clonazepam 0.25 Mg(Tablet),Tablet [120332] , Clonazepam(0.5Mg),Tablet [120872] , Clozapine(25 Mg),Tablet [120452] , Diazepam(5 Mg),Tablet [110367] , Divalproex Sodium(250 Mg),Tablet [120471] , Escitalopram(5 Mg),Tablet [120481] , Escitalopram + Clonazepam(10 Mg + 0.5 Mg),Tablet [120483] , Fluoxetine(10 Mg),Tablet Or Capsule [110361] , Glimepride 2 Mg + Metformin 1000 Mg(Tab),Tablet [120967] , Haloperidol(5Mg),Tablet [110356] , Levocetirizine 5Mg(Mouth Dissolving Tablet Also Acceptable),Tablet [110046] , Lorazepam(1 Mg),Tablet [120657] , Losartan(25 Mg),Tablet [140020] , Mirtazapine 15 Mg(Tablet),Tablet [120532] , Ondansetron(Tab 4 Mg),Tablet [4710264] , Pantoprazole 40 Mg, Domperidone 10 Mg(Tab),Tablet [120243] , Paroxetine Cr(12.5 Mg),Tablet [120564] , Pioglitazone(30 Mg),Tablet [120568] , Piracetam(800Mg),Tablet [140032] , Primaquine(15Mg),Tablet [110163] , Rosuvastatin(10 Mg),Tablet [120590] , Trihexyphenidyl(2Mg ),Tablet [110191] , 2Fdc (P) (Isoniazid 50 Mg & Rifampicin 75 Mg )(Dstb-Cp (P)),Tablet [202403006] , Alfacalcidiol Capsule(0.25 Mcg (Soft Gelatin Capsule Also Acceptable)),Capsule [120315] , Artesunate 200 Mg (3Tab) + Sulphadoxine 750 Mg + Pyrimethamine 37.5 Mg Ip (2 Tab)(Age Group 15 Or Above),Combi Blister Pack [110155] , Baclofen(40 Mg Tab),Tablet [120638] , Betahistine(8 Mg Tab),Tablet [110400] , Carbimazole(10 Mg),Tablet [120324] , Cefpodoxime(50 Mg (Dt Tablet Also Acceptable)),Tablet [110095] , Clofazimine Cap(100 Mg),Capsule [20200917] , Clotrimazole Vaginal Tablet I.P. - 100Mg(Without Applicator),Tablet [120842] , Cycloserine(Capsule 125 Mg),Capsule [202209021] , Diltiazem(Sr Tablet 90 Mg 10X10),Tablet [202209038] , Enalapril Maleate Tab(5Mg),Tablet [110220] , Ethionamide 125 Mg(Dispersible),Tablet [202403009] , Ethionamide 125 Mg Tab(125 Mg),Tablet [20210157] , Ethionamide 250 Mg Tab(250 Mg),Tablet [20210158] , Etizolam(0.5Mg),Tablet [202109101] , Ketorolac(10 Mg Tablet),Tablet [202207082] , Methylcobalamin(1500 Mcg),Tablet [120995] , Moxifloxacin 100Mg(Dispersible),Tablet [202403010] , Neomycin Sulphate+Bacitracin Zinc(5Mg+500 Iu/Gm Ointment (15Gm Tube)),Tube , Nicotinamide(Tablet 50 Mg),Tablet [202209084] , Nifedipine Capsule(5Mg Cap),Capsule [110227] , Nitroglycerine(Glyceryl Trinitrate)(Sublingual Tab 0.5 Mg),Tablet [4710073] , Oseltamivir 12 Mg/Ml Syrup(75Ml Bottle),Syrup [120237] , Penicillin V(Phenoxymethyl Penicillin Potassium)(250 Mg),Tablet [110126] , Pyrazinamide(150 Mg),Tablet [202403012] , Pyrazinamide(400 Mg),Tablet [202403013] , Pyridoxine(100 Mg),Tablet [120744] , Sodium Valporate + Valproic Acid Cr (300Mg),Tablet [140040] , Sodium Valproate(500 Mg),Tablet [120390] , Sodium Valproate Oral Solution(200 Mg / 5 Ml),Solution [110067] , Teneligliptin + Metformin(20Mg + 500Mg (Extended/Sustained Release Also Acceptable)),Tablet [140047] , Tiotropium 18Mcg(30Cap. X 6 Pack With 1 Dispensing Device),Rotacaps [700300] , Trypsin -Chymotrypsin(1 Lac Iu),Tablet [202109021] , Beclomethasone 0.025 % + Fusidic Acid 2.0 % Cream(10 Gm),Tube [202109012] , Febuxostat(80Mg),Tablet [202109103] , Fluconazole(200 Mg),Tablet [120352] , Aceclofenac 100Mg+Paracetamol 325Mg Tab( ),Tablet [120002] , Ammonium Chloride+Diphenhydramine+Sodium Citrate(138Mg+14.08Mg+57.03Mg Each 5Ml Cough Syrup (Additional Composition Of Menthol Also Acceptable)),Syrup , Chloroquine Phosphate Tab.(250Mg),Tablet [110159] , Chlorthalidone(25Mg),Tablet [202209037] , Deferasirox Dispersible(250Mg),Tablet [120102] , Diclofenac Sodium(50 Mg),Tablet [110023] , Etophylline + Theophylline((77 Mg+23 Mg)),Tablet [4710329] , Folic Acid Tab(400 Mcg),Tablet [700668] , Losartan Potassium, Hydrochlorthiazide(50 Mg + 12.5 Mg),Tablet [120185] , Metronidazole Benzoate Oral Suspension(100Mg Of Base/5 Ml (60Ml Bottle)),Suspension , Metronidazole Tab(400Mg),Tablet [110135] , Rosuvastatin(20 Mg),Tablet [202109128] , Sitagliptin + Metformin(50Mg + 500Mg),Tablet [140038] , Sulfamethoxazole +Trimethoprim Tab(200 Mg + 40 Mg),Tablet [110131] , Amiodarone(100Mg Tab),Tablet [110208] , Beclomethasone Inhalation I.P 200 Mcg Per Dose(200 Metered Dose Container),Inhaler , Brimonidine Eye Drop 0.2%(5Ml),Vial [120876] , Budesonide Nebulising Suspension Containing Budesonide(0.5 Mg/2 Ml, 2Ml Amp),Suspension [110372] , Darifenacin(7.5 Mg),Tablet [202207034] , Deferiprone(500 Mg),Capsule [120786] , Formoterol 6Mcg + Budesonide 200Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps [120778] , Formoterol 6Mcg + Budesonide 400Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps [120779] , Formoterol + Budesonide(6 Mcg + 100 Mcg/Puff (120 Mdi)),Inhaler [120135] , Formoterol Fumarate 12Mcg + Fluticasone Propionate( 500 Mcg ),Rotacaps [120777] , Insulin Biphasic Lispro 25:75 100 Iu/Ml (3 Ml Cartridge)(Firm Has To Supply Compatible Pen Along With Cartridges As And When Required Without Any Extra Cost),Cartridges [120713] , Ipratropium Bromide(250 Mcg/Ml Respules/Ampoule),Inhalation [20200601A] , Levosalbutamol(100Mcg),Capsule For Inhalation [202407001] , Levosalbutamol 100 Mcg + Ipratropium Bromide(40 Mcg),Rotacaps [120783] , Levosalbutamol (1.25Mg),Ipratropium (500Mcg) Respule(3Ml),Ampule [120749] , Liposomal Amphotericin B(50 Mg),Injection [20220114] , Metoprolol Inj 1 Mg/Ml(5Ml Vial),Injection [110225] , Propranolol Tab(40 Mg),Tablet [110229] , Salbutamol Inhalation Ip 100Mcg/Dose(200 Metered Dose Container),Inhaler [110380] , Salbutamol Nebuliser Solution Bp-Sabutamol Sulphate Eq. To Salbutamol 1Mg Per Ml(2.5 Ml Amp),Solution [110379] , Salmeterol 25 Mcg + Fluticasone 125 Mcg(120Mdi),Inhaler [780120] , Salmeterol 25 Mcg + Fluticasone 250 Mcg Inhaler (120Mdi)(250 Mcg),Inhaler [120730] , Salmeterol 50Mcg +Fluticasone 250 Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps [120780] , Salmeterol 50Mcg +Fluticasone 500 Mcg(30 Cap X 6 Pack With 1 Dispensing Device),Rotacaps [120781] , Tiotropium 9Mcg 180 Doses Inhaler(180 Or More Doses Acceptable),Inhaler [700301] , Tiotropium 9 Mcg + Formoterol 6 Mcg + Ciclesonide 200 Mcg(Pack Of 180 To 200Mdi),Inhaler [120909] , Tobramycin(300Mg/5 Ml),Respule [202207366] , Torsemide(10Mg),Tablet [110270] , Venlafaxine(75 Mg),Capsule [110363] , Warfarin(1 Mg ),Tablet [202209075] , Acamprosate(333 Mg),Tablet [120631] , Alendronate(70 Mg),Tablet [202109148] , Amiodarone Tab(200Mg),Tablet [4710096] , Amisulpride(200 Mg),Tablet [120407] , Atorvastatin(5 Mg),Tablet [120319] , Clobazam(10 Mg),Tablet [120331] , Donepezil(5 Mg),Tablet [120646] , Escitalopram(20 Mg),Tablet [120482] , Etoricoxib (90Mg),Tablet [140012] , Fluvoxamine(100 Mg),Tablet [120491] , Fluvoxamine(50 Mg),Tablet [120490] , Hydrochlorthiazide(12.5 Mg),Tablet [120356] , Lamotrigine Dt(50 Mg),Tablet [120514] , Lamotrigine Dt Tab(100 Mg),Tablet [120513] , Memantine(10 Mg),Tablet [120659] , Mycophenolate (360Mg),Tablet [140026] , Sertraline(100 Mg),Tablet [120594] , Sertraline(50 Mg),Tablet [110362] , Spironolactone Tab 100Mg(10X10),Tablet [4710136] , Tenofovir Desoproxil Fumarate(300 Mg (Tdf) Tablet/Capsule),Tablet Or Capsule , Hpmc (Hydroxy Proply Methyl Cellulose) 2% W/V(2Ml Glass Prefilled Syringe),Syrings [120690] , Hydroxy Propyl Methyl Cellulose Injection 2%(3Ml Prefilled Syringe),Syrings [120855] , Bortezomib(3.5Mg Vial),Injection [120048] , Activated Charcoal(400Mg),Tablet [202202008] , Beclomethasone Dipropionate, Neomycin Sulphate, Miconazole Nitrate(0.025 % + 0.5 % + 2 % (5 Gm Tube)),Ointment [120040] , Betamethasone Valerate Oint 0.1%(15 Gm Tube),Ointment [4460003] , Bisacodyl(5Mg Tab),Tablet [110293] , Brimonidine Eye Drop, 0.1%(5Ml),Eye Drop [120877] , Calcitriol 0.25 Mcg + Calcium 500Mg+ Mecobalamin 1500Mcg+ Omega-3 Acid Ethyl Esters-60 Bp+ Folic Acid-400Mcg + Elemental Boron 1.5Mg(Capsule/Soft Gelatin Capsule),Capsule [20200511] , Calcium Carbonate(500 Mg),Tablet [110403] , Carboxymethyl Cellulose 0.5% Eye Drop(5 Ml),Eye Drop [122020] , Cefotaxime + Sulbactam 1000 Mg + 500 Mg Vial(1000 Mg + 500 Mg),Injection [120429] , Chewable Antacid Containing Magnesium Hydroxide Minimum 250Mg To 500Mg+Aluminimum Hydroxide Minimum 250Mg To 500Mg +Simethecon/Dimethicon Minimum 25Mg To 50Mg Tab(Additional Component Will Also Be Accept),Tablet [1100273] , Chloramphenicol 1%(5 Ml Vial),Eye Drop [4240001] , Dinoprostone Gel(0.5 Mg),Gel [120885] , Disodium Hydrogen Citrate 1.25Gm/5Ml 100 Ml(100 Ml),Syrup [120882] , Hydrocortisone Sodium Succinate Inj. 200Mg Vial( ),Injection [4350141] , Levothyroxine(100 Mcg),Tablet [4710079] , Levothyroxine(50 Mcg),Tablet [4710074] , Multivitamin Sugar Coated Tab Nfi Formula Multivitamin Sugar(Item With Additional Vitamin Will Also Be Considered And Film Coated Also Acceptable),Tablet [110412] , Nicotine (Nrt)(2 Mg Chewing Gum ),Gum [120542] , Nicotine (Nrt)(4 Mg Chewing Gum ),Gum [120543] , Pregabalin + Methylcobalamin(75 Mg + 750 Mcg),Tablet Or Capsule [120573] , Sodium Chloride N/2 Injection(0.45%(100Ml Ffs Bottle)),Injection [202202013] , Vitamin B1 10Mg, B2 10Mg, B6 3Mg, B12 15Mcg, Niacinamide 75Mg, Calcium Panthenol 50Mg(Folic Acid 1.5Mg, Vitamin C 150Mg, Biotin 100Mcg Or More),Tablet [120692] , Sodium Dichloroisocynaurate 35 Mg Tablet(Turnover Criteria Amended As Average Annual Turnover 2Cr. Only Gmp Certified Companies Also Eligible For This Consumable Item),Tablet [121002A] , Atropine Sulphate 1%(5 Ml Vial),Eye Drop [110325] , Bupivacaine Hydrochloride(0.5% (20 Ml Vial)),Injection [110010] , Dexamethasone Eye Drop(0.1%, 5Ml),Eye Drop [120883] , Flurbinprofen Eye Drop 0.03%(5 Ml Vial),Eye Drop [120888] , Glycopyrrolate Inj. - 0.2 Mg/Ml(1 Ml Amp),Injection [110013] , Heparin(1000Iu/Ml 5Ml Vial),Injection [110194] , Ketorolac Eye Drop 0.5%,(5Ml),Drop [202209091] , Lorazepam(2 Mg / Ml 2 Ml Vial),Injection [120658] , Midazolam(1Mg/Ml (10Ml Vial)),Injection [110014A] , Noradrenaline Bitartrate 2 Mg Base / 2 Ml Amp Injection(2 Ml Amp),Injection [121109] , Succinyl Choline(50Mg/Ml (10 Ml Vial)),Injection [110033] , Timolol Maleate I.P. 0.5 %W/V(5 Ml Vial),Eye Drop [987694] , Tropicamide + Phenylephrine Eye Drop 0.8% And 5%(5 Ml Vial),Eye Drop [120904] , Mannitol(20% 100 Ml Ffs Bottle),Injection [110269] , Darbepoetin(25Mcg),Injection [140078] , Darbepoetin(40Mcg),Injection [140079] , Ketorolac Tromethamine Ip(20 Mg (30 Gram) Gel),Tube [202207083] , Panitumumab(100 Mg Vial),Injection [202207131] , Rituximab(500Mg ),Injection [4350297] , Sachet Ompeprazole Ip Excipents Sodium Bicarbonate (Eq To Approx, 460 Mg, Sodium)((Sucralose, Sucrose, Xanthan Gum, Xylitol And Mint Flavour) 20 Mg Sachet),Sachet [202207339] , Ursodeoxy Cholic Acid(150 Mg Tab),Tablet [120733] , Doxketoprofen Trometamol(Equivalent To Dexketoprofen 25Mg + Paracitamol 325 Mg),Tablet , Framycetin Sulphate 1% Cream(30 Gm Tube),Cream [110251] , Ferric Carboxymaltose 50Mg/Ml(10Ml Vial),Injection [120704] , Amoxicillin(125 Mg/5Ml (30 Ml Bottle)),Suspension [110074] , Ampicillin Trihydrate Capsules(500Mg 10X10),Capsule [110081] , Cefopodoxime 50 Mg/5 Ml Suspension(30Ml),Bottle [202109017] , Chloramphenicol Ear Drop 5%(5 Ml Vial),Drop [4580001] , Cyproheptadine Hydrochloride Ip(2Mg Each 5Ml),Syrup [140072] , Deflazacort(6Mg),Tablet [202109094] , Diclofenac Sodium 25 Mg/Ml(3Ml Amp),Injection [110024] , Itraconazole(200Mg),Capsule [202109108] , Rabeprazole + Levosulpiride(20Mg +75Mg),Tablet Or Capsule [202109126] , Fluoro Metholone Eye Drop 0.1%(5Ml),Eye Drop [122022] , Fat Emulsion 20%(250 Ml),Injection [202401001] , Fluconazole Iv(2Mg/Ml (100Ml Bottle)),Infusion [120133] , Hydroxyethyl (6% Saline Solution For Infusion)(Starch 6%Ip 500 Ml Bottel),Infusion , Ivf Glutamine Dipeptide(100Ml),Injection [120796] , Busulphan(60Mg/10Ml),Injection [202203019] , Vinorelbine(10 Mg),Injection [202109136] , Allopurinol(100Mg),Tablet [110034] , Glycerine + Sodium Chloride Enema(15% + 15% 20-30 Ml /Pack),Enema [120498] , Bromhexine Hcl 4 Mg+ Guaiphensin 50 Mg + Terbutaline Sulphate 1.25 Mg/5Ml Syp(100 Ml Bottle),Syrup [120049] , Disodium Hydrogen Citrate 1.25Gm/5Ml 100 Ml(100 Ml),Syrup [120882] , Iron Folic Acid Syrup Ip, Each 1Ml Of Syrup Shall Contain Ferrous Sulphate Equivalent To Elemental Ferrous Iron (Derived From Ferrous Sulphate Ip): 20Mg And Folic Acid Ip 0.1Mg (50Ml Bottle)(As Per Attached Specification Annexure),Syrup [202401002] , Metronidazole Oral Suspension(200 Mg/5Ml (60 Ml Bottle)),Suspension [110136] , Salbutamol(2Mg / 5Ml (100Ml Bottle)),Syrup [121035] , Potassium Chloride 150 Mg/Ml Injection, 10 Ml Ampule(10 Ml Ampule),Injection , Water For Injection 5 Ml Amp [110435] , Erythropoietin(4000 Iu Inj Vial/Pfs),Injection [120127] , Tenecteplase 20Mg(20Mg),Injection [120770] , Amisulpride(100 Mg),Tablet [120405] , Aripiprazole(10 Mg),Tablet [120413] , Divalproex Sodium(500 Mg Tab),Tablet [120469] , Duloxetine(20 Mg),Tablet [120475] , Entecavir(0.5 Mg Tablet/Capsule),Tablet Or Capsule [20201195] , Mirtazapine(7.5 Mg),Tablet [120369] , Doxorubicin (Lyophilized)(10 Mg / Vial),Injection [120116] , Gemcitabine(200Mg/Vial),Injection [120141] , Fluocinolone Acetonide Ip( 0.1% W/W 30 Gm Cream),Tube [122021] , Gefitinib(250Mg),Tablet [120139] , Tamoxifen(20Mg),Tablet [110187] , 5-Fluro Uracil(500Mg),Injection [202109081] , Bendamustine(100Mg Vial),Injection [120822] , Cisplatin(50 Mg),Injection [202109024] , Cyclophosphamide Inj 500Mg/Vial(Each),Injection [4350189] , Cytarabine(100Mg),Vial [120726] , Hydroxy Urea(500Mg),Capsule [120159] , Methotraxate(50 Mg),Injection [202109115] , Pemetrexed(500Mg),Injection [120248] , Temozolomide(250Mg),Capsule [120287] , Zoledronic Acid(4Mg Vial),Injection [110189] , Human Albumin Solution I.P. 20%W/V(100 Ml Ffs Bottle/Glass Bottle),Bottle [110202] , Carboxymethyl Cellulose (1% Eye Drop, 5Ml),Eye Drop [120879] , Ciprofloxacin + Dexamethosone (0.3%+0.1%)(5Ml),Eye Drop [120079] , Fluticasone 50Mcg/Spray(70-120 Meter Dose Nasal),Spray [202109034] , Hyoscine Butylbromide(10Mg),Tablet [120162] , Metformin(1000Mg),Sr Tablet [140022] , Ofloxacin + Dexamethosone(0.3%+ 0.1% (10 Ml)),Eye Drop [120225] , Olopotadine(0.1% W/V (5 Ml Vial)),Eye Drop [110337] , Vildagliptin Tab(50 Mg),Tablet [4710516] , Water For Injection Inj 10 Ml Amp [4350073] , Ferrous Ascorbate 100Mg (Elemental Iron)+Folic Acid 1.5Mg(Tablet),Tablet [120846] , Cisatracurium(2Mg/Ml),Injection [202207201] , Cyanocobalamin (Vit B-12)(1,000 Mcg/Ml),Injection [202207210] , Polypropylene 1-0 Rb 1/2 Circle 30 Mm, L 70 Cm(12 Foils /Pkt),Needle [202307002] , Isosorbide Dinitrate Tab Ip(5Mg),Tablet [110236] , Prazosin Tab(5 Mg),Tablet [4710081] , Primaquin(2.5Mg),Tablet [110161] , Pyridoxine(25 Mg),Tablet [202312022] , Pyridoxine(40 Mg),Tablet [202209085] , Pyridoxine(50 Mg),Tablet [202312023] , Thyroxine Sodium 25 Mcg(100 Per Bottle),Tablet [120607] , Thyroxine Sodium Tab 100 Mcg (100 Tab Bottle)(100 Tab),Tablet [110310] , Thyroxine Sodium Tab(50Mcg(100 Tab Bottle)),Tablet [110309] , Bicalutamide(50Mg ),Tablet [120831] , Erlotinib(150 Mg),Tablet [120827] , Ascorbic Acid (Vitamin C)(100 Mg),Tablet [202012174] , Clotrimazole(1% 100 Gm),Powder [120448] , Diclofenac Sodium(50 Mg),Tablet [110023] , Folic Acid Tab(400 Mcg),Tablet [700668] , Salbutamol Sulphate(4Mg),Tablet [110377] , Vitamin A Syrup(100000 Iu/Ml With Market Spoon For 1Ml And 2 Ml (100 Ml Bottle)),Syrup Or Solution [110417] , Vitamin. B Complex Nfi (Prophylactic)(B12 Mg, B22mg, B6 0.5 Mg, Niacinamide 25 Mg, Calcium Pantothenate 1 Mg),Tablet [20200514] , Amantadine(100Mg),Tablet [202109150] , Bevacizumab100 Mg(4 Ml Vial),Injection [120691] , Clonazepam(2Mg),Tablet [120873] , Etanercept 25Mg/Vial(Pack Of 2 Vials),Injection [120852] , Filgrastim 300 Mcg(Prefilled Syrings),Vial [120132] , Haloperidol(10Mg),Tablet [4340017] , Intravenous Immunoglobulin(Ivig 10% (10Gm /100Ml)),Vial [120853] , Iv Human Immunoglobin 5% Iv Ig(5Gm/100Ml Each),Infusion [120802] , Ranibizumab 10Mg/Ml Injection(Intenvitral),Injection [120787] , Rituximab(100Mg),Injection [120268] , Thyroxine Sodium(75 Mcg),Tablet [120608] , Trastuzumab 440 Mg Injection(Vial),Injection [120837] , Primaquin(7.5Mg),Tablet [110162] , Sulfasalazine(1 Gm),Tablet [202207358] , Bortezomib(2Mg),Injection [120047] , Exemestane(25 Mg),Tablet [202212010] , Irinotecan Hydrochloride(100 Mg),Injection [120173] , Lenalidomide(25Mg),Tablet Or Capsule [120826] , Oxaliplatin(50Mg Inj 25 Ml Vial),Injection [120239] , Paclitaxel Nanoparticle/Protein Bound Particles Inj.(100Mg Vial),Vial [120242] , Pemetrexed(100 Mg Vial),Injection [120247] , Sorafenib(200Mg),Tablet [120275] , Sunitinib(50 Mg),Tablet Or Capsule [202212008] , Canagliflozin(100 Mg),Tablet [20200914] , Risperidone(50 Mg Injection Vial Of 2 Ml),Injection [202209082] , Acetylsalicylic Acid(150 Mg),Tablet [202209004] , Adrenaline(1 Mg / Ml (1 Ml Amp)),Injection [110043] , Ascorbic Acid (Vitamin C) Tab I.P.(500Mg),Tablet [120030] , Atropine Sulphate 0.6 Mg/Ml Sc/Im/Iv(2Ml Amp),Injection [110012] , Calcium Citrate - 1000Mg (Elemental Ca Equivalent To 250 Mg And Vitamin D3 400 Iu)(-),Tablet [120695] , Combo Ear Drop(Chloramphenicol 5% W/V + Clotrimazole 1% + Lignocaine Hydrochloride 2%),Ear Drop [2021031] , Diazepam(5 Mg/Ml (2 Ml Amp)),Injection [110366] , Diclofenac 100Mg(Sr Tablet 10X10),Tablet [140010] , Doxycycline Dry Syrup(50 Mg/5 Ml),Suspension [202209025] , Doxylamine Succinate + Pyridoxine(10Mg+10Mg),Tablet [120117] , Elemental Iron 40 Mg, Ammonium Citrate 200 Mg, Cyanocobalamin 7.5 Mg, Folic Acid 0.5 Mg, Zinc Sulphate 7 Mg(Per 5Ml)(Iron Syrup 200 Ml),Bottle [987889] , Ethambutol(400 Mg),Tablet [202103054] , Ethambutol(800 Mg),Tablet [202103058] , Gabapantin300 Mg + Methylcobalamin 500 Mcg(300 Mg + 500 Mcg),Tablet [120989] , Gel Containing Choline Salicylate + Benzalkonium Chloride 9% + 0.02%(10 Gm),Gel , Isoniazid(100Mg(As Per Attached Specification)),Tablet [120705] , Isoniazid(300 Mg(As Per Attached Specification)),Tablet [120706] , Magnesium Suplhate(50 % W/V (2Ml Amp)),Injection [110345] , Methyl Prednisolone(8Mg),Tablet [120204] , Mupirocin(2% W/W (5 Gm Tube)),Ointment Or Cream Or Gel [110250] , Norfloxacin(100 Mg Dispersible Tablet),Tablet [202209027] , Ofloxacin Tab - 400 Mg(Ofloxacin Tab - 400 Mg),Tablet [700381] , Phenytoin Sodium(50 Mg/Ml (2Ml Amp)),Injection [110062] , Povidine-Iodine(Gargle 2% W/V 100 Ml Bottel),Bottle [202209047] , Rabeprazole(20 Mg),Tablet [120276] , Sodium Valproate Oral Solution(200 Mg / 5 Ml),Solution [202111020] , Water For Injection Ip(2 Ml Amp),Injection [110434] , Metoclopramide(10Mg),Tablet [110288] , Dexamethasone(4 Mg),Tablet [120104] , Diclofenac + Seratopeptidase(50Mg + 10Mg),Tablet [121033] , Doxylamine Succinate(10 Mg),Tablet [110286] , Fluconazole(50 Mg),Tablet [120350] , Glibenclamide(5 Mg),Tablet [120145] , Hydrochlorthiazide(12.5 Mg),Tablet [120356] , Isosorbide-5-Mononitrate(Tab.20 Mg),Tablet [110235] , Levetiracetam 500 Mg [120515] , Losartan(50 Mg),Tablet [4710032] , Metformine 500Mg + Glibenclamide 5Mg(Tab),Tablet [120707] , Metronidazole Oral Suspension(200 Mg/5Ml (60 Ml Bottle)),Suspension [110136] , Misoprostol(200Mcg),Tablet [110349] , Omeprazole Capsule(40 Mg),Capsule [120376] , Oseltamivir Cap(75Mg),Capsule [120235] , Paracetamol 500Mg + Chlorpheniramine 2Mg+ Phenylephrine 10Mg(500Mg+2Mg+10Mg),Tablet [202109068] , Telmisatran(20 Mg),Tablet [4710307] , Alfuzosin(10Mg),Tablet Capsule [202109149] , Citicoline(500Mg),Tablet [140007] , Fexofenadine + Montelukast (120Mg/10 Mg),Tablet [202109033] , Rifaximin(400Mg),Tablet [202109127] , Clopidogrel + Aspirin(75 Mg + 150 Mg),Capsule [120088] , Cycloserine(250Mg),Capsule [202312009] , Ethambutol(200 Mg),Tablet [202103053] , Ivabradine(5Mg),Tablet [120768] , Rifampicin(150 Mg),Capsule [202312003] , Rifampicin Cap(300 Mg),Capsule [700485] , Rifampicin Cap(450 Mg),Capsule [700486] , Rifapentine And Isoniazid Tablet(300Mg /300Mg),Tablet [202403014] , Artesunate(60 Mg /Vial),Injection [110148] , Alfacalcidol 0.25Mcg, Calcium 200Mg(0.25Mcg+200Mg),Capsule [140057] , Pyrazinamide(1000Mg),Tablet [202403011] , Azithromycin(200Mg/5Ml (15 Ml Bottle)),Syrup [110085] , Medroxy Progesterone Acetate(10 Mg),Tablet [120519] , Dydrogesterone(10 Mg),Tablet [110305] , Amikacin(500Mg/2Ml (2Ml Vial)),Injection [110070] , Ceftrioxone Usp(1Gm/Vial),Injection [110101] , Piperacillin + Tazobactam 1000 Mg + 125 Mg Vial 10 Ml Vial( ),Injection [120570] , Liquid Medical Oxygen(Not Less Than 99 % V/V Of Oxygen - Mars),Other Item [202301005] , Monthly Rental And Maintenance Charges Of Lmo Setup Per Site(Mars),Other Item , Transportation And Other Charges Per Cubic Meter Of Medical Oxygen(Mars),Consumable [202301011] , Aminophylline(25 Mg/Ml 10 Ml Vial),Injection [110370] , Betamethasone Sodium Phosphate(Ml Contain Betamethasone Sodium Phosphate Equal To 4Mg Of Betamethasone (1Ml Amp)),Injection [110035] , Calcium Gluconate 10%(10Ml Vial/Amp),Injection [110404] , Carboxymethylcellulose Sodium Eye Drop 0.5%(10Ml),Eye Drop [4240036] , Drotaverine(40Mg/2Ml (2Ml Amp)),Injection [110342] , Methyl Ergometrine Inj Meleate(0.2 Mg /Ml (1Ml Amp)),Injection [110347] , Moxifloxacin 0.5% W/V(5 Ml),Eye Drop [120534] , Moxifloxacine + Dexamethasone 0.5% + 0.1% W/V 5 Ml(-),Eye Drop [120536] , Ofloxacin 0.3% W/V Of Ofloxacin(5 Ml Vial),Eye Drop [110332] , Ondansetron(2 Mg/ Ml (2 Ml Amp)),Injection [110291] , Ondensetron(4Mg/2Ml, 2Ml Amp),Injection [140090] , Pheniramine Maleate(22.75 Mg/Ml (2 Ml Amp)),Injection [120250] , Promethazine 25 Mg/Ml(2 Ml Amp),Injection [120627] , Vitamin B12 Inj 500 Mcg/Ml(30 Ml Amp/Vial),Injection [120915] , Xylometazoline Nasal(0.1%W/V (10 Ml Vial)),Drop [120312] , Acyclovir(800Mg),Tablet [110168] , Betamethasone Dipropionate(0.05% (15Gm) Tube),Ointment Or Cream [110254] , Escitalopram 10 Mg Tab(10 Mg),Tablet [4710216] , Fusidic Acid Cream/Sodium Fusidic Ointment 2%(5Gm Tube),Tube [110252] , Gliclazide(80 Mg),Tablet [110297] , Levocarnitine-(500Mg),Tablet [202207283] , Metoprolol( 25Mg, Sustained Release ),Tablet Or Capsule [140024] , Moxonidine(0.2 Mg),Tablet [202207300] , Moxonidine(0.3 Mg),Tablet [202207301] , Phenytoin Sodium(100Mg),Tablet [110064] , Tacrolimus(0.1%W/W),Ointment [202207359] , Ibuprofen 100Mg + Paracetamol 125Mg Per 5 Ml Syrup(60 Ml Bottle),Syrup [987656] , Omeprazole(20Mg),Capsule [120230] , Cetuximab(500 Mg),Injection [202207016] , Linezolid Tab(600 Mg),Tablet [120751] , Abacavir(Tablet 300 Mg),Tablet [202209014] , Acyclovir 5%(5Gm ),Ointment Or Cream [110169] , Acyclovir Tab. Ip - 200Mg(Dt Tablets Also Acceptable),Tablet [110167] , Benzoyl Peroxide 2.5% 20 Gm(Ointment/Gel),Tube [120321] , Benzyl Benzoate Lotion 25%(100Ml Bottle),Bottle [700901] , Clindamycin(150 Mg),Capsule [202209019] , Clindamycin(300Mg ),Tablet Or Capsule [120776] , Clobetasol 0.05% + Gentamicin 0.1% Cream 10 Gm(10 Gm Tube),Cream [120082] , Clotrimazole (Vaginal Tab) 500 Mg(With Applicator),Tablet [1100145] , Daclatasvir(60 Mg Tab),Tablet [20201192] , Hydrocortisone 1% Ointment(15 Gm Tube),Ointment [202209011] , Levocetrizine(10Mg),Tablet [202109111] , Milk Of Magnesia+Liquid Paraffin (11.25Ml+3.75Ml) /15Ml(200Ml Bottle),Syrup [120208] , Phenobarbitone(30 Mg),Tablet [110061] , Phenobarbitone(60 Mg Tab),Tablet [120253] , Ramipril(5 Mg),Tablet [4710288] , Risperidone(1Mg),Tablet [120714] , Risperidone(2 Mg),Tablet [110359] , Sofosbuvir(400Mg Tab),Tablet [20201190] , Spironolactone(25Mg),Tablet [120761] , Ipratropium Bromide Inhaler 20Mcg Per Puff(200 Metered Dose Container),Inhaler , Ipratropium Bromide + Levosalbutamol(20Mcg+50Mcg, 200 Mdi),Inhaler , Aceclofenac + Paracetamol + Chlorzoxazone(100 Mg + 325 Mg + 500 Mg),Tablet , Acetazolamide Tab(250Mg),Tablet [110263] , Albendazole Suspension 200Mg/5Ml(10 Ml Bottle),Syrup [110140] , Amoxicillin 250Mg + Clavulanic Acid 50Mg Inj Vial [1350003] , Amoxicillin + Clavulanic Acid(200 Mg + 28.5 Mg),Tablet [120411] , Amoxycillin And Clavulanic Acid I.P.(500Mg + 125Mg),Tablet [110079] , Amoxycillin +Potassium Clavulanic(250Mg + 125Mg),Tablet [140001] , Ampicillin 250 Mg + Cloxacillin 250 Mg( Cap),Capsule [120972] , Ampicillin(500 Mg/Vial),Injection [110082] , Ampicillin Inj(250 Mg/Vial),Vial [110080] , Ampicillin Syrup (125 Mg / 5 Ml 30 Ml Bottle),Syrup [120024] , Atenolol(100Mg),Tablet [110215] , Atenolol(25 Mg),Tablet [120395] , Azithromycin 1Gm + Cefixime 400Mg((1 + 1 Tab)),Tablet [120841] , Benzathine Penicillin(6 Lakh Iu/Vial),Vial [110123] , Benzathine Penicilline 12 Lac Iu / Vial(Vial),Injection [110124] , Cefadroxil Syrup(125 Mg / 5 Ml 30 Ml Bottle),Syrup [120061] , Cefixime Syrup 50Mg/5Ml(30 Ml Bottle),Syrup [987605] , Cefpodoxime(200 Mg (Dispersible Tab Also Accepted)),Tablet [110096] , Chloroquine Phosphate Suspension Equivalent To Chloroquine 160Mg/10Ml(160Mg/10Ml (60Ml Bottle), Suspension/Syrup),Suspension , Clarithromycin(250 Mg),Tablet [202209018] , Cloxacillin(125 Mg / 5 Ml 40 Ml Bottle),Syrup [120336] , Cloxacillin Sodium Inj.(500Mg),Vial [120093] , Diazepam(10 Mg),Tablet [120462] , Diclofenac Sodium + Paracetamol +Serratiopeptidase(50 Mg +325 Mg + 10 Mg),Tablet , Diethylcarbamazine Tab(100Mg),Tablet [110143] , Fexofenadine(120Mg),Tablet [140013] , Fexofenadine(180Mg),Tablet [140014] , Furosemide Tab(40Mg),Tablet [110265] , Ivermectin Usp(6Mg),Tablet [4710242] , Ketoconazole(200Mg),Tablet [700508] , Mebendazole(100 Mg Tab),Tablet [120191] , Meropenem(1000 Mg (Vial)),Injection [120522] , Meropenem(500 Mg / Vial),Injection [110119] , Meropenem Inj 125Mg/Vial(Each),Injection [110118] , Meropenem + Sulbactum (1 Gm + 500 Mg)(1.5 Gm Injection Vial),Injection , Moxifloxacin( 400Mg),Tablet [120930] , Nevirapine(50Mg/5Ml),Syrup [202301013] , Nifedipine(10Mg Tab),Tablet [110228] , Norfloxacin(200 Mg),Tablet [140031] , Ofloxacin 200Mg +Tinidazole 600Mg(Tab),Tablet [120227] , Ondansetron(Drops) Syrup(2Mg/5Ml (10 Ml Bottle)),Syrup [700583] , Ornidazole Tab(500 Mg),Tablet [120377] , Paracetamol Oral Drops(100 Mg/Ml (15 Ml Bottle With Dropper)),Drop [120245] , Piperacillin + Tazobactam 2000 Mg + 250 Mg 20Ml Vial( 2000 Mg + 250 Mg 20Ml Vial),Injection [120569] , Pyrazinamide(500 Mg),Tablet [202012161] , Pyrazinamide 750Mg Tablet(10X10),Tablet [700666] , Quinine Sulphate(300Mg),Tablet [110165] , Riboflavin(Tablet 5 Mg 10 X 10),Tablet [202209086] , Secnidazole(500 Mg Tab),Tablet [120387] , Streptomycin Inj(0.75G),Injection [4350209] , Sulfamethoxazole And Trimethoprim(100 Mg And 20Mg),Tablet [110128] , Telmisartan(80Mg),Tablet [140045] , Tinidazole(300 Mg),Tablet [110138] , Tinidazole(500Mg),Tablet [110137] , Tramadol(50Mg),Tablet [110019] , Voriconazole(200Mg),Tablet [202203029] , Zidovudine(50Mg/5Ml),Syrup [202305004] , Zinc Sulphate Dispersible(10Mg),Tablet [110420] , Acyclovir Inj(250 Mg/Vial),Injection [4350007] , Adrenaline(1 Mg / Ml (1 Ml Amp)),Injection [110043] , Alpha-Beta Arteether(150Mg/2Ml),Injection [110156] , Amikacin(250Mg/2Ml),Injection [110069] , Artemether Inj 80Mg/Ml(1 Ml Amp),Injection [1350005] , Atropine Sulphate 0.6 Mg/Ml Sc/Im/Iv(2Ml Amp),Injection [110012] , Bupivacaine Hydrochloride 0.25%(20 Ml Vial),Injection [120050] , Bupivacaine Hydrochloride(0.5% (20 Ml Vial)),Injection [110010] , Bupivacaine Hydrochloride (Not For Spinal Use) (0.5%)( 4Ml Amp/Vial),Vial , Cefazolin Inj(500Mg Vial),Injection [110086] , Cefepime 1Gm And Tazobactam 125 Mg Inj(Vial),Solution [4350434] , Cefepime(500Mg Injection),Injection [4350329] , Cefotaxime Sodium(250 Mg Vial),Injection [110092] , Ceftazidime 1Gm/Vial Inj(1 Gm/Vial),Injection [110098] , Ceftazidime Inj(500Mg/ Vial),Injection [110097] , Ceftazidime Powder For Injection 250 Mg(Vial Of 1 Powder Injection With Appropriate Diluents),Injection [202209016] , Ceftriaxone(500Mg Vial),Injection [110100] , Ceftriaxone+Tazobactum(1Gm+125Mg,Vial),Injection [110102] , Ceftriaxone+Tazobactum 250Mg+31.25Mg(Vial),Injection [4350437] , Ceftriaxone+Tazobactum(500Mg+62.5Mg Vial),Injection [120070] , Chloroquine Phosphate(40Mg/Ml (5 Ml Amp)),Injection [110157] , Chlorpheniramine Maleate(10Mg/Ml Inj 10 Ml ),Vial [110047] , Clindamycin 600Mg (150Mg/Ml),Injection [202109026] , Dexamethasone Sodium Phosphate(8Mg/2Ml (2Ml Vial)),Injection [110037] , Dicyclomine(10Mg/Ml (2 Ml Amp)),Injection [110279] , Dobutamine Hcl 50 Mg/Ml(5Ml Amp),Injection [1100242] , Dopamine Hcl 40 Mg/Ml(5Ml Amp),Injection [1100244] , Heparin Inj(5000Iu/Ml 5Ml Vial),Injection [110195] , Iron Sucrose Usp(100 Mg/5 Ml (5 Ml Amp)),Injection [110411] , Ketamine Hydrochloride(10Mg/Ml (10Ml Vial)),Injection [110003] , Ketamine Hydrochloride(50Mg/Ml (10 Ml Vial)),Injection [120177] , Lignocaine 2% + Adrenaline 5 Mcg/Ml(30 Ml ),Injection [110009] , Magnesium Sulphate Injection(I.P.50 % W/V (1 Ml Amp)),Injection [120187] , Methyl Ergometrine Inj Meleate(0.2 Mg /Ml (1Ml Amp)),Injection [110347] , Metoclopramide 5Mg/Ml(2 Ml Amp),Injection [110287] , Midazolam(1Mg/Ml (5Ml Amp)),Injection [110014] , Ondansetron(2 Mg/ Ml (2 Ml Amp)),Injection [110291] , Oxytocin Inj(5 Iu/Ml (1Ml Amp)),Injection [700482] , Pentazocine Lactate(30Mg/Ml (1 Ml Amp)),Injection [4350028] , Pheniramine Maleate(22.75 Mg/Ml (2 Ml Amp)),Injection [120250] , Promethazine 25 Mg/Ml(1Ml Amp),Ampule [120851] , Propofal(Injection 10 Mg/Ml 1 Ml /Vial),Injection [202209003] , Propofol Sodium 1%W/V(10Mg/Ml (20Ml Vial)),Injection [110004] , Thiamine(Injection 100 Mg/Ml 1 Ml/Vial),Injection [202209087] , Tramadol(50Mg/Ml (2Ml Amp)),Injection [110018] , Tranexamic Acid Injection Bp/Ip(100Mg/Ml (5Ml Amp)),Injection [110198] , Vitamin B Complex Injection(Nfi Formula 30Ml/Vial),Injection [120308] , Cetrimide 15% W/V + Chlorhexidine 1.5% W/V(1 Liter Bottle),Bottle [110247] , Bleomycin(15 Units / Vial),Injection [700299] , Carboplatin(450Mg 45Ml Multidose Vial),Injection [110172] , Gemcitabine(1.4 Gm Vial),Injection [110180] , Irinotecan(40Mg/Vial),Injection [120172] , Topotecan(4Mg/4Ml Vial),Injection [202209032] , Digoxin Tab(0.25Mg),Tablet [110241] , Atenolol(50Mg Tab),Tablet [110216] , Hydrochlorothiazid(12.5 Mg),Tablet [202209042] , Methyl Prednisolone(4Mg),Tablet [120202] , Methyl Prednisolone Tab(16 Mg),Tablet [120201] , Pioglitazone(15 Mg),Tablet [120567] , Atenolol(25 Mg),Tablet [120395] , Atorvastatin Ip(20 Mg),Tablet [110239] , Cinnarizine(25 Mg),Tablet [110402] , Glimepiride(1 Mg),Tablet [110298] , Glimepiride(2 Mg),Tablet [110299] , Iron Folic Acid Sugar Coated (Red Tablet) Ferrous Sulphate Ip Equivalent To 60 Mg Elemental Iron & 500 Mcg Folic Acid Ip(60 Mg + 500 Mcg ),Tablet [110408] , Iron Folic Acid Sugar Coated Tablet Dried Ferrous Sulphate Ip Eq. To 45Mg Ferrous Iron And 400Mcg Folic Acid Ip (Pink Coloured Tab) -Wifs Junior Ifa Tablets (Detail Specification As Per Tender)(45Mg + 400Mcg),Tablet [110409] , Ferric Carboxymaltose 50Mg/Ml(20Ml Vial),Injection [122030] , Nilotinib(200Mg),Tablet Or Capsule [4710425] , Cyclosporine(100Mg),Capsule [202203030] , Cyclosporine(100Mg/ Ml),Solution [202203028] , Cyclosporine(50Mg),Capsule [202203031] , Degludec 100 Iu /Ml(3Ml Cartridge With Pen Inj.),Injection [140080] , Extended Half Life (Ehl) - Recombinant Factor Ix (Rfix)- Glycopegylated (Nonacog Beta Pegol)(500Iu),Vial [202303007] , Extended Half Life (Ehl) - Recombinant Factor Viii (Rfviii)- Glycopegylated (Turoctocog Alfa Pegol)(500Iu),Vial [202303006] , Insulin Biphasic Aspart 30:70 100 Iu/Ml (Firm Has To Supply Compatible Pen Along With Cartridges As And When Required Without Any Extra Cost)(3Ml Cartridge),Cartridges , Recombiant Fviia(1Mg/Vial),Vial [120861] , Recombiant Fviii(1000 Iu/Vial),Vial [120267] , Recombinant Anti - Hemophilic Factor Viii(250 Iu Inj / Vial),Injection [120265] , Recombinant Anti - Hemophilic Factor Viii(500 Iu Inj / Vial),Injection [120266] , Diltiazem(30 Mg),Tablet [110217] , Aceclofenac 100Mg+Paracetamol 325Mg Tab( ),Tablet [120002] , Amoxycillin Dispersible Tablets Ip-Amoxicillin Trihydrate Ip Equivalent To Amoxicillin(250Mg),Tablet [120022] , Amoxycilline(500Mg),Capsule [110073] , Cefadroxil(500 Mg),Tablet [700154] , Cefixime(200 Mg Tab (Dt Tablet Also Acceptable) ),Tablet [4710186] , Cefixime(50 Mg Dt),Tablet [110088] , Cefixime + Ofloxacin(200 Mg + 200 Mg),Tablet [120976] , Cefixime Tab Ip(100Mg),Tablet [120065] , Cefpodoxamine(200 Mg Tab),Tablet [201392] , Cephalexine(250Mg),Capsule [110104] , Ciprofloxacin(500Mg),Tablet [4350032] , Ciprofloxacin + Tinidazole(250 Mg + 300 Mg),Tablet [120328] , Ciprofloxacin + Tinidazole(500Mg+600Mg),Tablet [120080] , Diclofenac Sodium 50Mg + Paracetamol(325Mg),Tablet [120108] , Doxycycline(100 Mg),Capsule [110113] , Erythromycin Stearate(500 Mg),Tablet [120125] , Ibuprofen 400Mg+ Paracetamol 325Mg Tablet( ),Tablet [4710399] , Levofloxacin(250Mg),Tablet [110116] , Levofloxacin(500Mg),Tablet [110117] , Norfloxacin Tab. - 400Mg [4710033] , Ofloxacin + Ornidazole(200Mg And 500Mg),Tablet [120226] , Sulfamethoxazole And Trimethoprim(800Mg + 160Mg),Tablet [110130] , Tranexamic Acid(500 Mg Tab),Tablet [110199] , Etoricoxib (90Mg),Tablet [140012] , Prednisolone Tab 20 Mg(Dispersible Tablet Also Acceptable),Tablet [110042] , Sulfasalazine(500 Mg),Tablet [202207150] , 3 Fdc (P) (Isoniazid 50Mg, Rifampicin 75 Mg, Pyrazinamide 150 Mg)(Dstb-Ip (P)),Tablet [202403008] , Suspension For Intratracheal Instillation(80Mg/Ml (Pack Size As Licensed)),Suspension , Aminoacid (Essential) Infusion(10% 100Ml Glass Ffs),Bottle [120014] , Palbociclib(125 Mg),Tablet Or Capsule [202207128] , Recombinant Fix(1000Iu/Vial),Vial [120860] , Recombinant Fix(250Iu/Vial),Vial [120858] , Recombinant F Ix(500Iu/Vial),Vial [120859] , Anti Snake Venom Polyvalent Inj 10Ml (Lyophilized)(10 Ml Vial),Injection [110314] , Equine Anti Rabies Immunoglobulin,(Not Less Than 300Iu/Ml),Injection [120122] , Aceclofenac(100Mg),Tablet [110021] , Bromhexine Hcl 4 Mg+ Guaiphensin 50 Mg + Terbutaline Sulphate 1.25 Mg/5Ml Syp(100 Ml Bottle),Syrup [120049] , Cetirizine(10 Mg),Tablet [110044] , Disodium Hydrogen Citrate 1.25Gm/5Ml 100 Ml(100 Ml),Syrup [120882] , Ofloxacin(200Mg),Tablet [4710048] , Ranitidine(150Mg),Tablet [110277] , Alpha-Beta Arteether(150Mg/2Ml),Injection [110156] , Cefoperazone 1000Mg + Sulbactam 1000Mg Inj(Vial),Injection [110091] , Cefoperazone 1Gm /Vial Vial [120428] , Clindamycin 600Mg (150Mg/Ml),Injection [202109026] , Colistimethate Sodium For Injection Ip(2 M Iu Vial),Injection [202207026] , Methyl Prednisolone(500Mg),Injection [20200516] , Vecuronium Bromide(2Mg/Ml (2Ml Amp/Vial)),Injection [700398] , Voriconazole(200 Mg/Vials),Injection [202207174] , Buppivacaine 5 Mg, Dextrose80 Mg / Ml(4 Ml Injection),Injection [987852] , Oxytocin Inj(5 Iu/Ml (1Ml Amp)),Injection [700482] , Phytomenadione Injection 10Mg/Ml(10Mg Ampule),Injection [202202012] , Quinine Dihydrochloride(300Mg/Ml (2Ml Amp)),Injection [120716] , Liquid Medical Oxygen(Not Less Than 99 % V/V Of Oxygen - Dean-Datia-Ramavati Chemical),Other Item [20230448] , Monthly Rental And Maintenance Charges Of Lmo Setup Per Site(10Kl Dean-Datia-Ramavati Chemicals),Other Item [20230449] , Transportation And Other Charges Per Cubic Meter Of Medical Oxygen(Dean-Datia-Ramavati Chemicals),Other Item [20230450] , Iodised Peptone 0.322Mg (Equivalent To 33 Mcg Of Iodine), Magnesium Chloride Ip 6.67Mg(Equivalent To 0.8 Mg Of Magnesium), Manganese Sulphate Bp 1.33 Mg (Eq. To 0.33 Mg Of Manganese), Sodium Metavanadate 0.22Mg. Zinc Sulphate Ip 10.71 Mg(Eq. To 2.5Mg Of Zinc), Pyrodoxine Hydrochloride Ip 0.25 Mg Cyanocobalamin Ip 0.167 Mcg, Nicotinamide Ip 3.33 Mg, Ethanol (95%) Ip 0.317 Ml. Syrup 300 Ml ),Bottle [120892] , Peptonised Iron 176.5 Mg(Equivalent To 30 Mg Of Elemental Iron,Protein (As Peptone) 100 Mg,Folic Acid 200 Mcg, Vitamin B12 2.5 Mcg 100Ml),Bottle [20200910] , Amorolfine(0.25% W/W 30 Gm),Cream [202207190] , Atorvastatin(40Mg),Tablet [120767] , Methylcobalamin/Mecobalamin(500 Mcg),Tablet [120367] , Mometasone Furoate 0.1% - Salicylic Acid 5%(Tube),Cream [202207181] , Pregabalin (Sr Tablet Also Acceptable)(150 Mg),Tablet [202209007] , Silodosin(4 Mg),Tablet Or Capsule [202207346] , Silodosin(8Mg),Tablet Or Capsule [202207347] , Tamsulosin + Dutasteride 0.4 Mg + 0.5 Mg(Tab),Tablet [120600] , Teneligliptin(20Mg),Tablet [140046] , Hepatitis B Immunoglobulin(100 Iu/Vial),Vial [110319] , Plasma Derived Factor Viii(250Iu/Vial),Vial [120862] , Plasma Derived Factor Viii 500 Iu / Anti Hemophillic Factor Viii 500 Iu(Vial),Vial , Tenecteplase(40Mg),Injection [120771] , Amisulpride(50 Mg),Tablet [120406] , Aripiprazole 15 Mg(Tablet),Tablet [120414] , Clonazepam(1 Mg),Tablet [120333] , Clozapine(50 Mg),Tablet [120453] , Each 5Ml Contain Potassium Citrate I.P. 1100 Mgmagnesium Citrate U.S.P. 375 Mg Pyridoxine Hydrochloride I.P 20 Mg Colour Caramel(Each Ml Contains Approx.L Meq, Magnesium Ion, 2Meq. Potassium Ion, 3Meq. Citrate Ion And 4Mg Of Pyridoxine Hydrochloride),Bottle [20200904] , Enalapril Maleate Tab(2.5Mg),Tablet [110219] , Febuxostat(40 Mg Tab),Tablet [120988] , Flunarizine(10 Mg Tab),Tablet [120353] , Fluoxetine Cap(20 Mg),Capsule [120134] , Hydroxyzine 10Mg/5Ml Syrup,(100Ml Bottle),Syrup [202109040] , Hydroxyzine(25 Mg),Tablet [202209012] , Olanzapine(10Mg Tab),Tablet [4710498] , Olanzapine( 5 Mg),Tablet [120556] , Paracetamol + Phenylephrine + Chlorpheniramine Maleate (125Mg+2.5 Mg+1Mg) /Ml(15 Ml Bottle With Dropper),Drop [120561] , Tramadol(100Mg),Tablet [120297] , Amlodipine(10 Mg),Tablet [110214] , Cinacalcet(30 Mg),Tablet [202207019] , Faropenem(300Mg),Tablet [202207057] , Fluconazole(150 Mg),Tablet [110146] , Fluvoxamine(25Mg),Tablet [202207065] , Itraconazole Cap(100 Mg),Capsule [110147] , Paracetamol Tab(650 Mg),Tablet [700757] , Sevelamer(400 Mg),Tablet [202207148] , Tolvaptan(30 Mg),Tablet [202207167] , Emicizumab(Each 30Mg/Ml Each Vial),Vial [202211175] , Pertuzumab 30 Mg/Ml(420Mg/14Ml),Injection [202207313] , Bupivacaine Hcl For Spinal Anaesthesia(0.5%(Heavy)),Injection [110011] , Fentanyl Citrate Inj 50 Mcg/Ml(2Ml Ampoule),Ampule [110016] , Mephentermine Inj 30Mg/Ml(10 Ml Vial),Injection [120194] , Morphine Sulphate(10 Mg),Tablet [120816] , Morphine Sulphate Inj. Ip 10Mg/Ml(1Ml Ampoule),Injection [4350111] , Naltrexone(50 Mg),Tablet [120664] , Acyclovir Inj(250 Mg/Vial),Injection [4350007] , Acyclovir Intervenous Infusion I.P(500Mg/Vial),Injection [700017] , Adenosine(6 Mg/ 2Ml ),Injection [2023012002] , Calcium Leucovorin(50 Mg/Vial Inj),Injection [700213] , Esmolol 100 Mg/Vial(10Mg/Ml),Injection [120484] , Pralidoxime (Pam) Inj(25 Mg/Ml),Injection [4350085] , Streptokinase Inj 15 Lac Iu(Vial/Amp),Injection [1100210] , Vasopressin(20 Iu / Ml),Injection [202207379] , Ambroxol Hcl 15Mg+Terbutaline Sulphate 1.25Mg+Guaiphenesin 50Mg 5Ml((Additional Composition Of Menthol Also Acceptable) 100Ml Bottle),Syrup [120825] , Azithromycin(100Mg/5Ml (15 Ml Bottle)),Suspension [120034] , Bromhexine Hcl 4 Mg+ Guaiphensin 50 Mg + Terbutaline Sulphate 1.25 Mg/5Ml Syp(100 Ml Bottle),Syrup [120049] , Bromhexine Hydrochloride(4Mg/5Ml Syrup (50Ml Bottle)),Syrup [110383] , Calcium Carbonate 625 Mg, Vitamin - D3 125 Iu / 5 Ml(100 Ml Syrup),Syrup [120052] , Cetirizine(5Mg/5Ml (60 Ml Bottle)),Syrup [120071] , Cetirizine Syrup (5Mg/5Ml 30 Ml Bottle)(30Ml Bottle),Syrup [110045] , Chlorpheniramine Oral Liquid 2 Mg/5 Ml(30 Ml Bottel),Liquid [202209009] , Cyproheptadine Hcl + Tricholine Citrate(2Mg + 275 Mg / 5 Ml (200Ml Bottle)),Syrup [120097] , Dextromethorphan Hydrobromide Syrup 13.5 Mg/ 5Ml(30 Ml Bottle),Syrup [700411] , Diclofenac(1%),Ointment Or Cream Or Gel [120106] , Domperidone(1 Mg/ Ml 10 Ml With Dropper),Drop [120472] , Domperidone Suspension 1Mg/Ml(30Ml Bottle),Suspension [110285] , Furazolidone(25Mg/5Ml (60 Ml Bottle)),Suspension [120137] , Glucose Pouch(75 Gm)(Powder),Powder [120840] , Glycerine Ip Solution (Who-Gmp Certification Exempted For This Item)(100 Ml ),Bottle , Glycerin Oral Liquid Ip (Repacking License Is Also Eligible)(30 Ml Bottel),Liquid , Ketoconazole Ointment 2% 15Gm Tube(15 Gm),Ointment [4460030] , Lignocaine Hydrochloride(2% W/V (30 Gm Tube)),Gel [110007] , Metronidazole 100Mg/5Ml(30Ml),Syrup [120719] , Milk Of Magnesia+Liquid Paraffin (11.25Ml+3.75Ml) /15Ml(200Ml Bottle),Syrup , Multivitamin Syrup 60 Ml (Each 5Ml Contains-Vitamin A (Palmitate) Ip 1600 Iu+Vitamin D3 Ip 200 Iu(+Vitamin B2 Ip 1.00Mg+Vitamin B6 Ip 0.50Mg+Niacinamide Ip 15.00Mg+D-Panthenol Ip 1.00Mg (20% Variability In Strength Or With Additional Contents Acceptable)),Syrup [120897] , Norfloxacin 100Mg Metronidazole 100Mg( Per 5Ml),Suspension [120554] , Norfloxacin + Tinidazole((100 Mg + 100 Mg)/5 Ml 30Ml Syrup),Syrup [120220] , Paracetamol(125 Mg/Ml),Drop [20200720] , Paracetamol 150 Mg/Ml(15 Ml Bottle With Dropper),Drop [110028] , Paraffin Liquid(Liquid Paraffin 1.25Ml + Milk Of Magnesia 3.75Ml + Sodium Picosulphate 3.33Mg),Syrup [4700084] , Potassium Chloride Oral Solution 100Mg/Ml(200Ml Bottle),Bottle [110414] , Povidone Iodine(5% 100 Ml),Solution [110427] , Povidone Iodine + Metronidazole(5 % + 1 % ),Ointment [120577] , Povidone Iodine Ointment 5%(15Gm Tube),Tube [110430] , Povidone Iodine Ointment 5% 250Gm Jar( ),Each [4340018] , Povidone Iodine Solution-5%(500 Ml),Bottle [120688] , Promethazine 5 Mg/5Ml(60 Ml Bottle),Syrup [110050] , Silver Sulphadiazine Cream(Usp 1% W/W 25Gm),Tube [110262] , Tinidazole 150 Mg / 5 Ml(60 Ml Bottle),Suspension [110139] , Turpentine Oil (Repacking License Is Also Eligible)(50Ml Bottle),Bottle [202208032] , Zinc Sulphate/Gluconate 10 Mg Elemental Zinc / 5 Ml(10 Mg /5 Ml),Syrup [120618] , Ceritinib(150Mg),Tablet Or Capsule [202207015] , Secukinumab 150 Mg/Ml(Powder For Solution For Injection),Injection [202207342] , Anti Thymocyte Immunoglobulin (Rabbit)(5Mg/Ml (25Mg Vial)),Injection [202203018] , Anti Rabies Vaccine I.P. Inj. Human (Tissue Culture) For I/D And I/M Route 2.5 Iu With(1Ml Diluents),Vial [119316R] , Diosmin (450Mg) + Hesperidin(50Mg),Tablet [202207230] , Perindopril 8Mg + Amlodipine 5Mg(8Mg + 5Mg),Tablet [202207138] , Perindopril 8Mg + Indapamide 2.5 Mg(8Mg + 2.5Mg),Tablet [202207137] , Pregabalin(75Mg),Capsule [140067] , Clopidogrel(75 Mg),Tablet [4710026] , Buprenorphine 20 Mg Patch(Each Patch),Each [120830] , Fentanyl T.D. Patch T D(50 Micro Gram/Hour),Patch [202207239] , Airway, Nasopharyngeal, Sterile, Single Use, Set With 6.5Mm(External Diameter),Consumable [202208028] , Trucut Biopsy Needle(18 G Length 15 Cm Without Gun),Each [202406001] , Alprazolam(Tab 0.25Mg),Tablet [110364] , Atorvastatin + Asprin(10Mg + 75Mg),Tablet Or Capsule [140002] , Betamethasone(0.5 Mg),Tablet [110036] , Bisoprolol(5 Mg),Tablet [202109163] , Disodium Hydrogen Citrate(1.4Gm/5Ml)(200Ml),Syrup [120809] , Enalapril Maleate(Tab 10 Mg),Tablet [202209039] , Finofibrate(160 Mg),Tablet [202209040] , Hydrochlorothiazide Tab(25 Mg),Tablet [110267] , Ivermectin(Tab 12 Mg),Tablet [202209026] , Loperamide(2Mg),Tablet [120828] , Omeprazole + Domperidone 20 Mg + 10 Mg(Capsule),Capsule [120557] , Pantaprazole(40Mg Tab),Tablet [4710114] , Prednisolone(10 Mg (Dt Also Acceptable)),Tablet [110041] , Prednisolone (Dt Tablets Also Accepted)(5Mg),Tablet [120572] , Propranolol Tab(10 Mg),Tablet [110230] , Ramipril(2.5 Mg),Tablet [110231] , Sildenafil(50 Mg),Tablet [120732] , Tamsulosin(0.4Mg),Tablet [120282] , Torsemide(20Mg),Tablet [110271] , Warfarin(2 Mg),Tablet [202209076] , Warfarin Sodium(5 Mg),Tablet [110196] , Aceclofenac 100Mg+Paracetamol 325Mg Tab( ),Tablet [120002] , Beclomethasone Dipropionate, Clotrimazole, Neomycine Sulphate, Chlorocresol(0.025% + 1% + 0.5% + 0.1% W/W (5Gm Tube)),Ointment Or Cream [120039] , Benzoic Acid + Salicylic Acid(6% + 3% (15 Gm Tube)),Ointment [120320] , Betamethasone Valerate Cream 0.05%(15Gm Tube),Ointment [120042] , Carbamazepine(200 Mg),Tablet [110057] , Clindamycin(300Mg ),Tablet Or Capsule [120776] , Diclofenac Sodium 50Mg + Paracetamol(325Mg),Tablet [120108] , Domperidone(10Mg),Tablet [110284] , Doxycycline(100 Mg),Capsule [110113] , Ibuprofen(400Mg),Tablet [110026] , Levocetirizine + Monteleukast(5 Mg + 10 Mg),Tablet [120516] , Mupirocin(2% W/W (5 Gm Tube)),Ointment Or Cream Or Gel [110250] , Pantoprazole 40 Mg, Domperidone 10 Mg(Tab),Tablet [120243] , Risperidone(2 Mg),Tablet [110359] , Silver Sulphadiazine Cream Usp 1%(500 Gm Jar),Cream [700600] , Telmisartan(40 Mg),Tablet [110233] , Vitamin. B Complex Nfi (Prophylactic)(B12 Mg, B22mg, B6 0.5 Mg, Niacinamide 25 Mg, Calcium Pantothenate 1 Mg),Tablet [20200514] , Clarithromycin(500Mg),Injection [120774] , Colistinethate Sodium Inj Bp(1 Million Iu),Injection [700764] , Colistin Sulphate(12.5 Mg / 5 Ml 30 Ml Bottle),Suspension [120337] , Finasteride(1Mg),Tablet [202207058] , Levetiracetam(100Mg/Ml),Injection [202109043] , L Ornithine And L Aspartate(5Mg/10 Ml),Injection [202207277] , Mycophenolate(250 Mg),Tablet Or Capsule [202207114] , Sevelamer Carbonate(800Mg),Tablet [140035] , Sodium Bicarbonate Inj. - 7.5% W/V(10Ml),Ampoule [4350083] , Teicoplanin(200 Mg /Vial),Injection [120602] , Thiamine Hcl.2Ml(Each Ml Contains 50Mg) 50 Mg Inj(.),Injection [120950] , Tofacitinib(5Mg),Tablet [202207162] , Tramadol(50Mg/Ml (2Ml Amp)),Injection [110018] , Vancomycin Hydrochloride(250Mg Vial),Injection [120300] , Vancomycin Hydrochloride(500Mg),Injection [120302] , Amoxicillin And Clavulanic Acid I.P.(200+28.5Mg (30 Ml Bottle)),Syrup [110078] , Amoxycillin 250 Mg + Cloxacillin 250 Mg(250Mg + 250Mg),Capsule [120970] , Clopidogrel (75Mg) + Aspirin(75Mg Tab),Tablet [4710496] , Voglibose(0.3Mg (Mouth Dissolving Tablet Also Acceptable)),Tablet [120311] , Azithromycin(500 Mg/5Ml Inj ),Vial [120033] , Ivf (L-Alanine + L-Glutamine)(50 Ml),Injection [120798] , Chloroquine Phosphate Suspension Equivalent To Chloroquine(50Mg/5Ml (60 Ml Bottle)),Suspension [110158] , Dextromethorphan 10Mg/5Ml(100Ml Bottle),Syrup [120105] , Dextromethorphan Syrup(60Ml Bottle)(10Mg/5Ml),Syrup [120847] , Ibuprofen Syrup 100Mg/5Ml (60 Ml Bottle)(60 Ml Bottle),Syrup [110025] , Magnesium Hydroxide + Aluminium Hydroxide Simethecon 250 Mg + 250 Mg + 50 Mg/ 5 Ml 170 Ml Bottle(Syrup),Syrup [120518] , Ofloxacin Suspension 50Mg/5 Ml(30 Ml Bottle),Suspension [120224] , Vitamin B Complex Nfi Formula(100Ml Bottle),Syrup [120310] , Vitamin B Complex Nfi Formula(200Ml Bottle),Syrup [120309] , Diacerin 50Mg + Glucosamine 750Mg(Tab.),Tablet [202207225] , Labetalol(100 Mg),Tablet [110221] , Vitamin B1(Thiamine 100 Mg),Tablet [120613] , Vitamin D3 (Cholecalciferol)(400 Iu /Ml (100 Ml Bottle)),Syrup [120615] , Acyclovir 3%(Ointment),Ointment [202211096] , Alpha-Beta Arteether Inj 75 Mg /Ml 1Ml 1Ml Amp( ),Injection [120011] , Amiodarone 50Mg/Ml(3Ml Vial/Amp),Injection [1100207] , Carboprost(250 Mcg (1 Ml Amp/Vial)),Injection [110303] , Chloramphenicol + Dexamethasone 1% + 0.1%(Eyedrops-5 Ml Vial),Eye Drop [202204020] , Citicoline(250Mg/Ml),Injection [202207202] , Clotrimazole 1%W/V +Lignocaine 2%W/V Ear Drop 10Ml Vial Bfs/Ffs Squeeze(10Ml Vial),Vial [4790061] , Dobutamine(12.5 Mg / Ml 20 Ml Vial),Injection [110243] , Gatifloxacin(0.3% ),Eye Drop [120138] , Gentamicin 0.3%(10Ml),Eye And Ear Drop [20210223] , Gentamycin Sulphate 0.1%(15Gm Tube),Ointment Or Cream [120143] , Haloperidol Inj(5Mg/Ml (1 Ml Amp)),Injection [4350087] , Labetalol 5 Mg/Ml(4Ml Ampl),Injection [202209043] , Lantanoprost Eye Drop 0.005%(5Ml),Eye Drop [120895] , Medroxyprogesterone Acetate(Injection 150 Mg 1 Ml / Vial),Injection [202209064] , Methylprednisolone Acetate Ip(80Mg/2Ml),Injection [202207292] , Metronidazole(0.75 % Cream),Tube [202207294] , Moxifloxacin 0.5% W/V(5 Ml),Eye Drop [120534] , Moxifloxacin+ Ketorolac(0.5% W/V Plus .5% W/V),Eye Drop [202207299] , Normal Saline(Nasal Drops: Sodium Chloride Drops 0.05% W/V 10 Ml Vial),Drop [202209053] , Phenobarbitone(200 Mg/Ml),Injection [110060] , Piperacillin + Tazobactum(4.5 G),Injection [110127] , Salicylic Acid 6 % Ointment(6 % Ointment),Ointment [110261] , Sodium Thiopentone - 0.5 Gm Powder/Vial(20Ml Vial),Injection [4350057] , Sulfacetamide(20%),Eye Drop [4240002] , Tobramycin + Dexamethasone(0.3%W/V + 0.1%W/V (5Ml Vial)),Eye Drop [120292] , Tropicamide(1% 5Ml Vial),Eye Drop [110328] , Vitamin K1(1Mg/0.5Ml (0.5 Ml Amp)),Injection [110418] , Neostigmine(0.5Mg/Ml (1Ml Amp)),Injection [110322] , Extended Half Life (Ehl) - Recombinant Factor Viii (Rfviii)- Pegylated (Rurioctocog Alfa Pegol)(500Iu),Vial [202303005] , Human Albumin Solution 5%(250 Ml Bottel ),Injection [202209072] , Plasma Derived Activated Prothrombin Complex Concentrate(500 Units/Vial),Injection [120865] , Atracurium(10Mg/Ml ),Injection [110032] , Feracrylum 1% 100 Ml Solution(1% 100Ml),Solution [202109104] , Feracrylum 1% Gel(15Gm),Tube [20200512] , Ropivacaine Hydrochloride(0.2 % 2Mg/Ml),Injection [202207335] , Aceclofenac 100Mg+Paracetamol 325Mg + Serratiopeptidase 15Mg(10X10),Tablet [120857] , Cefepime(250 Mg/Vial),Injection [120397] , Ceftazidime(250Mg/Vial),Injection [120068] , Olmesartan Medoxomil( 20 Mg),Tablet [120997] , Surgical Spirit Ip(500 Ml),Bottle [120599] , Etomidate Vial (2Mg/Ml) -(10Ml Vial),Injection [202207054] , Aceclofenac 100 Mg +Paracetamol 325 Mg +Chlorzoxazone 250 Mg(100Mg+325Mg+250Mg),Tablet [202207187] , Cefuroxime 750Mg Powder For Solution For Injection(750Mg),Powder [700519] , Thiocolchicoside(4 Mg),Tablet Or Capsule [202207364] , Acarbose Tab(50Mg),Tablet [120001] , Aceborophylline(100 Mg ),Capsule [700389] , Aciclovir Tab 400 Mg(400 Mg Dt Tablet Also Acceptable),Tablet [4710112] , Adapalene(0.1%W/W),Gel [202109147] , Allopurinol(300 Mg),Tablet [202209006] , Amitriptyline Tab. Ip(25 Mg),Tablet [120016] , Artesunate + Sulphadoxine + Pyrimethamine(Age Group Of Less Than 1Year)(25 Mg (3 Tab) + 250 Mg (1 Tab) + 12.5Mg Tablets Ip(1Tab) (Dispersible Tablet Also Aceepted)),Tablet [110151] , Benzoyl Peroxide Gel 5%(15 Gm Tube),Tube [202209048] , Bromocriptine(2.5 Mg),Tablet [202207195] , Calcium Acetate(667 Mg),Tablet [140003] , Carbamazepine(100 Mg / 5 Ml 100 Ml Bottle),Syrup [110059] , Carbamazepine(200 Mg),Tablet [110057] , Carvedilol (12.5Mg),Tablet [202109088] , Chlordiazepoxide(10 Mg),Tablet [120439] , Chlordiazepoxide(25 Mg),Tablet [120438] , Chlorpromazine(100 Mg),Tablet [700452] , Chlorthalidone(12.5Mg ),Tablet [202209036] , Clobazam( 5 Mg),Tablet [120330] , Clobetasole Propionet 0.05% + Salicylic Acid 3%(15Gm Tube),Ointment [202207022] , Clobetasole Propionet 0.05% + Salicylic Acid 6%(15Gm Tube ),Ointment [202207023] , Clotrimazole 1% W/V(15Ml),Mouth Paint [120449] , Clotrimazole Vaginal Tablet I.P. - 100Mg(Without Applicator),Tablet [120842] , Dexamethasone(0.5Mg),Tablet [110038] , Dicyclomine(10Mg),Tablet [4710058] , Diloxanide Furoate(Tablet 500 Mg),Tablet [202209024] , Diltiazem Tablet(60 Mg),Tablet [120109] , Diphenhydramine Syrup(12.5Mg/5Ml (100 Ml Bottle)),Syrup [700582] , Donepezil(10 Mg),Tablet [120647] , Doxophylline(400 Mg),Tablet [120473] , Each Uncoated Chewable Tablet Contains Dride Aluminium Hydroxide I.P 240 Mg Magnesium(Hydroxide I.P 100Mg Activated Dimethicone I.P 25Mg Light Magnesium Carbonate Ip 60Mg),Tablet [120986] , Entecavir(1 Mg Tablet/Capsule),Tablet Or Capsule [20201196] , Ethamsylate Tab(250 Mg),Tablet [110197] , Ethamsylate Tab(500Mg),Tablet [120129] , Etiophylline +Theophylline((46.5+14)Mg / 5Ml (100 Ml Bottle)),Syrup [110374] , Etophylline + Theophylline Sr Tablet 231Mg + 69Mg( ),Tablet [120487] , Frusemide 20Mg + Spironolactone 50Mg(Tablet),Tablet [120136] , Gabapentin(300Mg),Tablet [202109037] , Glimepiride + Metformin Hydrocloride Sr(1 Mg + 500 Mg),Tablet [120496] , Haloperidol(1.5 Mg),Tablet [120652] , Hydroxychloroquine(400 Mg),Tablet [20200302] , Imipramine(25Mg),Tablet [202112010] , Lactulose(10Gm/15Ml (100 Ml Bottle)),Solution [110296] , Levetiracetam 100Mg/Ml Syrup/ Solution(100Ml Bottle),Syrup [202109044] , Lorazepam(2 Mg),Tablet [110368] , Luliconazole(1% W/W),Cream [202207286] , Metformin + Glimepiride(500 Mg + 2 Mg Tablet (Sr Form Also Acceptable)),Tablet [120524] , Methyl Ergometrine Maleate Tab(0.125Mg),Tablet [4710018] , Metoprolol(50Mg),Tablet [110226] , Metronidazole Tab(200 Mg),Tablet [110134] , Nitrofurantoin(100Mg),Tablet Capsule [120217] , Oseltamivir 30Mg(Capsule),Capsule [120234] , Oseltamivir(45Mg),Capsule [120236] , Oxcarbazepine(300 Mg),Tablet [120379] , Pentoxyfylline(400 Mg),Tablet [202207308] , Perindopril(8Mg),Tablet [202207139] , Phenytoin Sodium Oral Suspension - 25 Mg/Ml(100 Ml Bottle Suspension),Suspension [110065] , Povidone Iodine Vaginal(200 Mg),Pessary [110428] , Sitagliptin(100 Mg),Tablet [120271] , Sodium Valporate(300 Mg),Tablet [120598] , Tamoxifen(10 Mg),Tablet [120281] , Terbinafine Hcl 1% W/W(10Gm Tube ),Cream [202207361] , Ticagrelor(90Mg),Tablet [202207400] , Tricholine Citrate + Sorbitol(550 Mg + 7.15 G/10 Ml ),Syrup [120610] , Vildagliptin + Metformin(50Mg + 500Mg),Tablet [120305] , Vitamin D3 Drop 10Ml (Cholecalciferol 400 Iu)(10 Ml Drop),Drop [120916] , Voglibose(0.2 Mg),Tablet [202207172] , Zolpidem 10 Mg(Tablet),Tablet [120678] , Ethamsylate Inj(250Mg (2Ml Amp)),Injection [4350314] , Ethinylestradiol (A) + Levonorgestrel (B)(Tablet 0.03 Mg (A) + 0.15 Mg (B) 10X10),Tablet [202209061] , Fluconazole Eye Drop 3 Mg/Ml(10 Ml Vial), 5Ml Eye Drop(5 Ml Eye Drop),Drop [202209078] , Mebeverine Hydrochloride(200Mg),Tablet [202207289] , Methylcobalamine (Vitamin B12) 500 Mcg /Ml 3 Ml [120527] , Micronised Progestrone(200 Mg),Tablet [110308] , Cisplatin(10 Mg),Injection [202109023] , Cyclophosphamide Inj(200 Mg/Vial),Injection [120095] , Etoposide(100Mg Vial),Injection [110178] , Vinblastine(10Mg),Injection [4350303] , Vincristine Sulphate((1Mg/Ml) 1 Ml Vial),Injection [202401003] , Clindamycin(150Mg/Ml (2 Ml Vial/Amp)),Injection [110111] , Docetaxel(120Mg Vial),Injection [110175] , Docetaxel(20Mg),Injection [120113] , Docetaxel( 80Mg Inj (Docetaxel Concentrate Also Acceptable)),Injection [120114] , Enoxaparin (20Mg/0.2Ml)(0.2 Ml Prefilled Syringe ),Injection [4350435] , Epirubicin(100Mg/Vial),Injection [110177] , Imipenem 500 Mg With Cilastatin 500Mg(Vial/Amp),Injection [120789] , Oxaliplatin(100Mg),Injection [110184] , Paclitaxel Inj(100Mg ),Injection [120694] , Carvedilol(3.125 Mg),Tablet [120058] , Enoxaparin(40Mg Equivalent To- 4000 Iu Vial/Pfs),Injection [110192] , Enoxaparin(60Mg Equivalant To- 6000 Iu Vial/Pfs),Injection [110193] , Diphtheria Antitoxin 10000 Iu(10Ml Vial),Injection [110318] , Ciprofloxacin Inj 200 Mg/100 Ml(100 Ml Ffs Bottle),Infusion [110110] , Dextrose 5%(500Ml Ffs Bottle),Injection [110389] , Dextrose With Saline(5% + 0.9% (500Ml Ffs Bottle)),Injection [110390] , Electrolyte P (Multi-Electrolytes And Dextrose Injection Type I Ip) I/V Fluid (Each 100Ml Contains: Anhydrous Dextrose 5Gm Potassium Chloride 0.13Gm, Sodium Acetate 0.32Gm, Dibasic Potassium Phosphate 0.026Gm)(500 Ml Ffs Bottle),Injection [110394] , Mannitol Inj. 20% 350Ml Ffs Bottle [700315] , Metronidazole 500Mg/100 Ml(100 Ml Ffs Bottle),Injection [110133] , Ringer Lactate Ip I/V 0.24 % W/V Of Lactic Acid ( Eq. To 0.32% W/V Of Sodium Lactate), 0.6 % W/V Sodium Chloride, 0.04 % W/V Potassium Chloride And 0.027 % W/V Calcium Chloride(500Ml Ffs Bottle),Infusion [110398] , Amoxycillin +Clavulanic Acid((Amoxycillin 500 + Clavulanic Acid 100 Mg)/Vial),Injection [110077] , Ciprofloxacin(250Mg),Tablet [110107] , Ibuprofen(400Mg),Tablet [110026] , Imipenem 250Mg+Cilastatin 250Mg (Powder For Solution(1 Each)),Injection [120889] , Methyl Prednisolone Sodium Succinate Inj.1000Mg Vial(1000Mg Vial),Injection Solution For [4350231] , Metronidazole Tab(400Mg),Tablet [110135] , Paracetamol(500Mg),Tablet [110027] , Vancomycin Hydrochloride(1000Mg Vial),Injection [120301] , Needle Free(Connector),Consumable [202305002] , Titanium Chemo Port With Silicon Catheter (8 Fr) Length -60Cm-80Cm, Guide Wire, Peel-Away Desilet, Hubsite Needle(22 G * 20 -25.4Mm),Consumable [202403004] , Cefadroxil 250 Mg(Tab),Tablet [120396] , Cefixime(200 Mg Tab (Dt Tablet Also Acceptable) ),Tablet [4710186] , Cefixime Tab Ip(100Mg),Tablet [120065] , Cefopodoxime 50 Mg/5 Ml Suspension(30Ml),Bottle [202109017] , Cefpodoxime Tablet 100 Mg(Dt Tablet Also Acceptable),Tablet [120398] , Cephalexine(Each 5Ml Contains 125Mg (30Ml Bottle)),Syrup [110106] , Ciprofloxacin + Tinidazole(250 Mg + 300 Mg),Tablet [120328] , Diclofenac 50Mg +Paracetamol 325Mg+Chlorzoxazone 500Mg(Tab),Tablet [987680] , Diclofenac+Paracetamol+Chlorzoxazoe(50 Mg + 325 Mg + 250 Mg),Tablet [120464] , Dicyclomine Hydrochloride(20 Mg),Tablet [110281] , Furazolidone(100Mg),Tablet [1100112] , Multivitamin Sugar Coated Tab Nfi Formula Multivitamin Sugar(Item With Additional Vitamin Will Also Be Considered And Film Coated Also Acceptable),Tablet [110412] , Norfloxacine 400Mg And Tinidazole 600Mg(Tab),Tablet [120221] , Piroxicam(20Mg),Tablet Or Capsule [110031] , Sulfamethoxazole And Trimethoprim(400Mg + 80Mg),Tablet [110129] , Sulfamethoxazole And Trimethoprim(800Mg + 160Mg),Tablet [110130] , Vitamin. B Complex Nfi (Prophylactic)(B12 Mg, B22mg, B6 0.5 Mg, Niacinamide 25 Mg, Calcium Pantothenate 1 Mg),Tablet [20200514] , Beclomethasone Dipropionate, Clotrimazole, Neomycine Sulphate, Chlorocresol(0.025% + 1% + 0.5% + 0.1% W/W (5Gm Tube)),Ointment Or Cream [120039] , Bupropion(150 Mg),Tablet [120641] , Domperidone(10Mg),Tablet [110284] , Flunarizine(5 Mg),Tablet [110437] , Folic Acid Ip(5 Mg),Tablet [110406] , Levocetirizine + Monteleukast 2.5 Mg + 4 Mg / 5 Ml(60 Ml Bottle,Suspension),Suspension [121214] , Permethrin Lotion 5% W/V(60 Ml Bottle),Lotion [4000008] , Salbutamol Sulphate (2Mg/5Ml 60Ml)(60Ml Bottle),Syrup [110381] , Wax Solvent Ear Drops: Benzocaine(2.7% W/V 10 Ml Bottel Drop),Drop [202209054] , Wax Solvent Ear Drops:Paradichlorobenzene(2 % W/V 10 Ml Bottel),Drop [202209055] , Liquid Medical Oxygen(Not Less Than 99 % V/V Of Oxygen - Yash),Other Item [202301004] , Monthly Rental And Maintenance Charges Of Lmo Setup Per Site(Yash),Other Item [202212018] , Transportation And Other Charges Per Cubic Meter Of Medical Oxygen(Yash),Other Item [202301010] , Capecitabine(500Mg),Tablet [110171] , Cefixime Oral Suspension(100 Mg / 5 Ml (30 Ml Bottle)),Suspension [110090] , Ceftriaxone(250Mg Vial),Injection [110099] , Doxorubicin (Lyophilised)(50Mg Vial),Injection [110176] , Gentamicin 0.3% Eye/Ear Drops(5Ml Ffs Squeeze Vial),Eye Drop [130142] , Hyoscine Butylbromide 20Mg/Ml(1Ml Vial/Amp),Injection [110283] , Imatinib(400 Mg Tab),Tablet [110181] , Isoxsuprine(10Mg),Tablet [120174] , Letrozole(2.5 Mg),Tablet [120728] , Mifepristone(200 Mg),Tablet [110348] , Paclitaxel 260Mg(43.34Ml Vial),Injection [110185] , Permethrin Cream 5% W/V(60 Gm),Tube [202202011] , Azithromycin(200Mg/5Ml (15 Ml Bottle)),Syrup [110085] , Beclomethasone Dipropionate, Neomycin Sulphate, Miconazole Nitrate(0.025 % + 0.5 % + 2 % (5 Gm Tube)),Ointment [120040] , Betamethasone Dipropionate(0.05% (15Gm) Tube),Ointment Or Cream [110254] , Calcium Phosphate(2 : 1 Ratio (100 Ml Bottle)),Syrup(Each 5 Ml Contains :- Calcium 82 Mg + Vitamin D3 (Cholecalciferol) 200 Iu + Vitamin B12 (Cynocobalamin) 2.5 Mcg),Syrup [120699] , Chlorpheniramine 2Mg+ Dextromethorphan 10Mg /5Ml(100Ml),Syrup [202109019] , Clindamycin(1% W/W 10 Gm),Gel [120329] , Clotrimazole Cream - 1%(15 Gm Tube ),Cream [4150001] , Clotrimazole I.P.- 2%W/W(15Gm Tube),Cream Or Gel [110144] , Cyproheptadine Hydrochloride Ip(2Mg Each 5Ml),Syrup [140072] , Diphenhydramine(25Mg),Capsule [120110] , Gamma Benzene Hexachloride Solution/Lotion 1%((100 Ml)),Bottle [110256] , Hydrocortisone(Ointment 0.5% 15 Gm),Ointment Or Cream [202209010] , Hydroquinone 2% + Mometasone 0.1% + Tretinoin0.025%(5 Gm Tube),Cream [202207074] , Levosalbutamol 1 Mg / 5 Ml( Syrup),(100 Ml Bottle),Syrup [202207094] , Miconazole Cream I.P. 2% W/W(15 Gm Tube),Cream Or Ointment [110249] , Omeprazole(20Mg),Capsule [120230] , Omeprazole Capsule(40 Mg),Capsule [120376] , Omeprazole + Domperidone 20 Mg + 10 Mg(Capsule),Capsule [120557] , Ors Who Powder Glucose Anhydrous 13.5G/L, Sodium Chloride 2.6G/L, Potassium Chloride 1.5G/L, Trisodium Citrate 2.9G/L(As Per Attached Pack Specification),Powder [4520020] , Paracetamol Syrup/Suspension 125 Mg/5Ml (60Ml Bottle)(Syrup),Syrup [4700001] , Permethrin Cream 5% W/V(60 Gm),Tube [202202011] , Permethrin Lotion 5% W/V(60 Ml Bottle),Lotion [4000008] , Sertaconazole(2% W/W),Cream [202207345] , Vitamin A Syrup(100000 Iu/Ml With Market Spoon For 1Ml And 2 Ml (100 Ml Bottle)),Syrup Or Solution [110417] , Zinc Sulphate Syrup - 20Mg/5Ml(50 Ml Bottle),Syrup [4700009] , Aceclofenac(100Mg),Tablet [110021] , Amoxicillin Cap(250 Mg),Capsule [4070001] , Amoxycilline(500Mg),Capsule [110073] , Ampicillin(250 Mg),Capsule [120718] , Artesunate 150Mg (3Tab) + Sulphadoxine 500Mg + Pyrimethamine 25Mg ( 2 Tab )(Age Group 9 To 14 Years Combi),Tablet Combi Red Colour Blister Pack [110154] , Artesunate 50 Mg (3 Tab) + Sulphadoxine 500 Mg + Pyrimethamine 25 Mg (1 Tab)(Age Group Between 1-4 Year),Combi Blister Pack [110152] , Artesunate + Sulphadoxine + Pyrimethamine Ip(100 Mg(3Tab) + 750Mg + 37.5Mg (1Tab) (Age Group Between 5 To 8 Years)),Combi Blister Pack [110153] , Atorvastatin(40Mg),Tablet [120767] , Cephalexine(250Mg),Capsule [110104] , Cephalexine(500Mg),Capsule [110105] , Montelukast(5 Mg),Tablet [202209071] , Iron & Folic Acid With Vitamin B12 Capsules (Time Released) Each Timed-Release Capsule Contains:(Ferrous Fumarate (In Sr Form) Ip 200Mg Eq. To 64Mg Elemental Iron Cyanocobalamine Ip 15Mcg Folic Acid Ip 1.5Mg),Capsule [120937] , Anastrozole Tablet(1 Mg),Tablet [120832] , Gemcitabine(1000Mg Vial),Injection [120140] , L-Asparaginase 5000 Iu Lyophilized(Vial),Injection [120180] , Temozolomide(100Mg),Capsule [120285] , Temozolomide(20Mg),Capsule [120286] , Theophylline + Etophylline(35Mg+115Mg),Tablet [120740] , Erythropoietin(10000Iu Inj),Injection [4350419] , Pegfilgrastin(6 Mg/0.6Ml (0.6Ml Vial/Pfs)),Injection [202207312] , Rh-Erythropoetin(2000 I.U),Injection [110205] , Labetalol(20 Mg/4 Ml (4Ml Amp)),Injection [110222] , Cefotaxime Sodium(500 Mg/Vial),Injection [110093] , Inj Acetylcysteine 200 Mg/Ml (1 Ml Amp) , Inj Bupivacaine Heavy 4 Ml , Inj Clonidine 150 Mcg/Ml , Inj Dexmedetomidine 100 Mcg/Ml , Inj Digoxin 0.5 Mg/ 2Ml , Inj Dextomide 100 Mcg/Ml , Inj Doxycycline 100 Mg , Inj Diltiazem 5 Mg/Ml , Iohexol Injection 350 Mg Iodine/Ml(100 Ml Vial),Injection [202211184] , Iohexol Injection 350 Mg Iodine/Ml(20 Ml Vial),Consumable [20200729] , Inj Lidocaine 4% , Inj Lidocaine2% , Inj Lignocaine With Adrenaline 4% , Inj Lignocaine Hcl Preservative Free 50 Ml For Iv Use , Inj Multivitamin For Iv Use 10 Ml , Inj Milrinone 10 Mg/10 Ml , Inj Myopyrolate (Glycopyrrolate 0.5 Mg + Neostigmine 2.5 Mg) , Inj Netilmycin 50 Mg , Inj Nitroglycerine 5 Mg/Ml , Inj Sodium Valproate 500 Mg , Inj Tetanus Toxoid , Inj Tigecycline50 Mg , I/V Normal Saline 3% 100 Ml , I/V Normal Saline 1/2 0.45% 500 Ml , I/V Dextrose 50% 100 Ml , I/V Isolyte M 500 Ml , I/V Paracetamol 100 Ml , I/V Total Parentral Nutrition 2000 Ml , I/V Tinidazole 400 Ml , Distilled Water 500 Ml , Sevoflurane (250 Ml Bottle) , Isoflurane (250 Ml Bottle) , Water For Injection 50 Ml , Tab Pheniramine Maleate 25 Mg , Tab Antioxidant , Tab Bisacodyl 5Mg , Tab Cabergoline 0.25 Mg , Tab Cabergoline 0.5 Mg , Tab Cefodoxime 200 Mg , Tab Frusemide 40 Mg , Cap Hydroxy Urea 250 Mg , Tab Methylprednisolone 4 Mg , Tab Methylprednisolone 8 Mg , Tab Methylprednisolone 16 Mg , Tab Paracetamol+Tramadol , Tab Thicolchicoside 8 Mg , Tab Tadalafil 5 Mg , Tab Tadalafil 10 Mg , Tab Nortryptyline 10 Mg , Tab Nortryptyline 25 Mg , Tab Mitrazepine 7.5 Mg , Tab Mitrazepine 15 Mg , Tab Baclofen 10 Mg , Tab Baclofen 20 Mg , Tab Melatonin 3 Mg , Tab Melatonin 5 Mg , Tab Atomoxetine 10 Mg , Tab Etiozolam 0.25 Mg , Tab Etiozolam 0.5 Mg , Tab Clomiperamine 75 Mg , Tab Naproxen 250 Mg , Tab Naproxen 500 Mg , Tab Desvenlafexine 25 Mg , Tab Desvenlafexine 50 Mg , Tab L-Methylfolate 7.5 Mg , Tab Tropiramate 50 Mg , Tab Glycopyyrolate 2 Mg , Syp Antioxodant 100 Ml , Syp Paracetamol+Tramol 60 Ml , Syp Ciprofloxacin+Metronidazole 30 Ml , Syp Ofloxacin+Tinidazole 30 Ml , Syp Dicyclomine , Syp Phenobarbital 20 Mg/5 Ml , Syp/Tab Pyrimethamine+Sulfadiazine , Syp Caffeine Citrate , Syp Ranitidine 150 Mg , Drop Digoxin , Drop Multivitamin , Probiotic Sachet , Hmf ( Human Milk Fortifier) Sachet , K Binder (Calcium Polystyrene Sulphonate ) Powder 15 Gm , Mct (Medium Chain Triglyceride) Oil , Respule Acetylcysteine , Inhaler Salbutamol 50 Mcg + Beclomethasone 50 Mcg , Ear Drop Neosporin , Ear Drop Ofloxacin+Clotrimazole+Beclomethasone , Ear Drop Neosporin+Beclomethasone+Clotrimazole , Ear Drop Ofloxacin+Dexamethasone , Ear Drop Fluconazole , Nasal Drop Ciprofloxacin+Dexamethasone , Nasal Drop Botroclot (Haemocoagulase Solution) , Oint Magnesium Sulphate,Urea,Sulphacetamide,Proflavine , Oint Heparin , Inj Zolendronic Acid 4 Mg , Tab Formalin , Eto Indicator Tape , Microtome Blade , B.B Silk Size-3/0 (12 Foils/Pkt)(3/8Cir Rcut Needle 26Mm Length 76 Cm),Needle [700615] , B.B Silk With 1/2 Cir Rb/Cutting Needle 30 Mm Length 75 Cm Non Absorbable(Size 2-0, 12 Foils/Pkt),Consumable [700103] , B.B Silk With 1/2 Cir Rb Needle 20 Mm Length At Least 75 Cm Non Absorbable Surgical Suture Usp Size 3-0,(12Foils/Pkt),Needle [700104] , B.B Silk With 1/2 Cir Rb Needle Size:4/0 20 Mm(Length At Least 75 Cm, 12 Foils Per Packet),Needle [700469] , Chromic Catgut Suture(3/8 Cir Rcutting Needle 16 Mm, Suture Length 76 Cm(5/0 12 Foils/Pkt)),Sutures [700859] , Chromic Size - 1, (12 Foils/Pkt)(1/2 Cir Rb Needle 40 Mm, Length 76 Cm),Needle [700573] , Chromic Size - 1, 12 Foils/Pkt(1/2 Cir Rb Needle 45 Mm, Length 100 Cm),Needle [700557] , Chromic With 1/2 Cir Rb Needle 40 Mm Length 76 Cm (With Needle) ) Absorbable Surgical Sutures Usp,(Size 1, 12 Foils/Pkt),Surgical Material [987769] , Chromic With 1/2 Cir Rb Needle Absorbable Surgical Suture (12 Foils/Pkt)(40 Mm Length 76 Cm Size:1/0 ,Surgical Material),Consumable [202109009] , Chromic With St Rb Needle (12 Foils/Pkt)(60 Mm Length 76 Cm Size:2/0),Consumable [6450009] , Coated Polyster With 1/2 Cir Green Needle 17 Mm (Curved Reverse Cutting Or Curved Round Body Or Taper Cut) Size:2/0 Length 90Cm(.),Consumable [202212002] , Gloves Latex Autoclavable(8 No (Pair) Made Of Natural Latex Micro Rough Finish For Better Grip),Consumable [Mis59] , Nylon Suture,Macrofilment Spatulated, Micropoint Double Armed Size 10-0(12 Foils/Pkt),Sutures [700870] , Polyamide Size - 1/0, 12 Foils/Pkt(3/8 R Cutting Needle 45 Mm, Length 70 Cm),Needle [700570] , Polyamide Size - 2/0, 12 Foils/Pkt(3/8 R Cutting Needle 45 Mm, Length 70 Cm),Needle [700558] , Polyamide With Cd R Cut Extra Penetrating Needle (12 Foils/Pkt)(Size 4/0),Consumable [987778] , Polyglactin 30 Mm 1/2 Circle Round Body 90 Cm Size 1/0(12 Foils/ Pkt),Consumable [700332] , Polyglactin 40 Mm 1/2 Circle Round Body 90 Cm Size 1(12 Foils/ Pkt),Consumable [700333] , Polyglycolic Acid Absorbable Surgical Suture (12 Foils/Pkt)(1/2 Cir Rb Needle 20 Mm, Length 70 Cm Size -3/0),Needle [700562] , Polyglycolic Acid Absorbable Surgical Suture (12 Foils/Pkt)(1/2 Cir Rb Needle 40 Mm, Length 90 Cm Size -2/0),Needle [700561] , Sutures 6-0, Braided Coated Polyglycolic Acid / Polyglactin 910, Violet Absorbable Surgical Suture With Needle,1/4Th Micropoint Spatula 8Mm Double Arm(12 Foils/Packet),Sutures [202211187] , Chromic Catgut Suture (12 Foils/Pkt)(3/8 Cir R Cutting Needle 19 Mm Needle, Suture Length 76 Cm Size 4/0),Needle [700612] , Poly Propylene Monofilament Sterile Precut With 1/2 Cir Rb Needle 30Mm Length 70Cm Non Absorbable Surgical Sutures Usp Size 2/0(Size:2/0 (12 Foils/Pkt)),Consumable [987776] , Poly Propylene Monofilament Sterile Precut With 1/2 Cir Rb Needle 30Mm Length 70Cm Size : 1/0(12 Foils/Pkt),Consumable [700265] , Poly Propylene Monofilament Sterile Precut With 1/2 Cir Rb Needle 40 Mm Length 70 Cm Size 1(12 Foils/Pkt),Needle [700329] , Chromic (12 Foils/Pkt)(3/8 Rb Needle 30 Mm, Length 76 Cm, Size - 2/0),Needle [700560] , Chromic Size - 1/0 (12 Foils/Pkt)(3/8 Cir Rb Needle 40 Mm, Suture Length 76 Cm),Needle [700572] , Chromic With 1/2 Cir Rb Needle 30 Mm Length 76Cm, 2-0 Usp, Absorbable Surgical Suture Surgical Material(12 Foils/Box),Surgical Material [987766] , Chromic With Cd Rb Needle 30 Mm Length 76 Cm Size:2/0(Absorbable Surgical Suture Surgical Usp, 12 Foils/Boxmaterial),Surgical Material [987770] , Turp Loop, Double Lumen Stem, Cutting Loop, Angled, 24 Fr. , Poly Propylene Mesh(15 X 15 Cm), Consumable [700330] , Poly Propylene Mesh (7.5 Cm X 15Cm), Consumable [987906] , Disposable Spinal Needle(23 No),Each [700128] , Spinal (L.P.) Needle Disposable(24G),Consumable [987783] , Spinal Needle(24 G),Consumable [700417] , Spinal Needle 26 G(Each),Needle [700484] , Ffr Catheter(Model- Comet Ii Pressure Guide Wire),Consumable [202309002] , Hip Joint Procedure Cooled Rf Kit - 100Mm Probe Length,(With 4Mm Active Tip),Consumable [202401020] , Ivus Catheter(Model- Opticross Hd (60 Mhz)),Consumable [202309001] , Knee Procedure Cooled Rf Kit - 75Mm Probe Length,(With 4Mm Active Tip),Consumable [202401018] , Laparoscopic Surgery Instruments:- 5 Mm Lap Hand Activated Curved Coagulating Shears Capable Of Sealing Blood Vessels Upto 7 Mm In Diameter With Ultrasonic Technology,(36 Cm And 45 Cm Shaft Length, Ergonomic Handle. ),Consumable [202402031] , Laparoscopic Surgery Instruments:- Articulating Rf Probe(35 Cm),Consumable [202402032] , Open Surgery Instruments:-17 Cm Shaft, Curved, Tapered Tip For Precise Dissection, Seals 5 Mm Vessels,(As Well As Lymphatic With16 Mm Active Blade & 240-Degree Activation, Triggers Support Multiple Hand Positions. ),Consumable [202402026] , Open Surgery Instruments:- 5Mm Diameter, 20Cm Long, 18Mm Curved Coated Blade And A Clamp Arm With Tissue Pad, Capable Of Cutting, Sealing, Grasping And Coagulating Blood Vessels Up To And Including 7Mm In Diameter,(With An Integrated Hand Piece And T),Consumable [202402030] , Open Surgery Instruments:-5 Mm Hand Activated Curved Coagulating Shears Capable Of Sealing Blood Vessels Upto 5Mm In Diameter,(23 Cm Shaft Length, Ergonomic Handle.),Consumable [202402027] , Open Surgery Instruments:- 9Cm Shaft, Curved, Tapered Tip For Precise Dissection, Seals 5 Mm Vessels,(As Well As Lymphatic With 16 Mm Active Blade & 240-Degree Activation, Triggers Support Multiple Hand Positions),Consumable [202402025] , Open Surgery Instruments:- Curved Blade Having Telescoping Shaft (10Cm-14Cm)(With Integrated Hand Activation Control Buttons),Consumable [202402028] , Open Surgery Instruments:-Dissecting Hook Having Telescoping Shaft (10Cm-14Cm)(With Integrated Hand Activation Control Buttons),Consumable [202402029] , Pull Back Sledge(Model- Sterile Pulback Sled),Consumable [202309003] , Reusable Co2 Fiber(Can Be Used With Flexible Endoscopy, For Use In Tumor Surgery In The Larynx, Pharynx, Nasal And Oral Structures And Specially For Use In Stenosis & Juvenile Papillomatosis),Consumable [202403002] , Rf Grounding(Pad),Consumable [202401011] , Si Procedure Cooled Rf Kit - 150Mm Probe Length,(With 4Mm Active Tip),Consumable [202401019] , Standard Rf Cannula Supporting 100Mm Length, 10Mm Active Tip,(20 Gauge),Consumable [202401015] , Standard Rf Cannula Supporting 100Mm Length, 5Mm Active Tip,(21 Gauge),Consumable [202401014] , Standard Rf Cannula Supporting 145Mm Length, 10Mm Active Tip,(20 Gauge),Consumable [202401017] , Standard Rf Cannula Supporting 145Mm Length, 5Mm Active Tip,(20 Gauge),Consumable [202401016] , Standard Rf Probe 100Mm Length,(20 Gauge, Reusable),Consumable [202401012] , Standard Rf Probe 145Mm Length,(20 Gauge, Reusable),Consumable [202401013] , Transducer Of Laproscopic(Handpiece ),Consumable [202402033] , Peripheral Inserted Central Catheter(4 Fr),Consumable [202203008] , Peripheral Inserted Central Catheter(5 Fr),Consumable [202203009] , Nasal Mask With Compatible Interface(Medium Size),Consumable [202402008] , Nasal Mask With Compatible Interface(Small Size),Consumable [202402007] , Reusable Tubes(For Bubble C-Pap),Consumable [202402009] , Airway, Oropharyngeal Guedel, Set With Size Of: No. 3(80 Mm),Consumable [2020765] , Airway, Oropharyngeal Guedel, Set With Size Of: No. 4(90 Mm),Consumable [2020766] , Blood Transfusion Set(Pediatric),Consumable [20201061] , Intravenous Set With Airway And Needle((Adult)),Surgical Material [6450089] , Non-Rebreathing Mask(Oxygen Mask With Reservoir Bag),Consumable [2020772] , Paediatric Drip Set(Set),Consumable [700116] , Urinary Drainage Bag Cap With Non Return Valve (Eo Sterile)(2 Litre, Each),Consumable [700876] , Heated Breathing Circuit(For Hfnc),Consumable [202302001] , Humidifier Chamber(For Hfnc),Consumable [202302002] , Personal Protective Suite With Tape Over Seam And Kit(As Per Attached Specification),Consumable [202102200] , Adult - Double Lumen Catheter Set(Size: 11.5 Fr-12 Fr, 13Cm To 15Cm (Curved)), Consumable [700824] , Adult - Double Lumen Catheter Set(Size: 11.5 Fr-12 Fr, 13Cm To 15Cm (Straight)), Consumable [700823] , A V Fistula Sterilized Twin Needle(17 G (Two Needle Pack)),Consumable [700786] , Central Venous Catheter Kit(Single Lumen),Kit [700210] , Femoral Catheters Double Lumen Kit Curved Double Lumen Catheter Set(12 F (Curved) Adult),Consumable [700228] , Fistula Sterilized Twin Needle(16 G (Two Needle Pack)),Consumable [700785] , Pressure Monitor(Line),Each [201280] , Triple Lumen Jugular Catheter Kit,(Size 12F, 16+/- 1Cm, Kit),Consumable [700869] , Foldable Iol Sterile Lens Pc+14D(Lens-2),Pc+16D(Lens-3),Pc+18D(Lens-5),Pc+19D(Lens-5),Pc+19.5D(Lens-5),Pc+20D(Lens-15),Pc+20.5(Lens-15),Pc+21D(Lens-13),Pc+21.5D(Lens-11),Pc+22D(Lens-11),Pc+22.5D(Lens-5),Pc+23D(Lens-5),Pc+24D(Lens-3),Pc+26D(Lens-2)((One Box Should Contain 100 Pieces As Per Specification Of Power Given),Lens(Attached Specification (100 Lens Per Box)),Consumable [Mis55] , Non Foldable Iol Sterile Lens Pc+14D (2),Pc+16D (3),Pc+18D (5),Pc+19D (5),Pc+19.5D (5),Pc+20D (15),Pc+20.5D (15),Pc+21D (13),Pc+21.5D (10),Pc+22D (10),Pc+22.5D (5),Pc+23D (5),Pc+24D (3),Pc+26D (2),Ac+19D(2)(Box),Lens [700427] , Adhesive Plasters Usp(7.5 Cm X 5 Mts/Roll),Consumable [6550014] , Adhesive Tape 7.5Cm X10(Mtr/Roll),Consumable [700446] , Sterile Disposable/Hypodermic Syringe For Single Use(5Ml (With Needle) :Is 10258 :2002 Marked),Consumable [Mis118] , Sterile Disposable/Hypodermic Syringe(Is 10258:2002 With Needle 10Ml),Consumable [Mis119] , Sterile Disposable/Hypodermic Syringe With Needle For Single Use(1Ml :Is10258),Consumable [Mis121] , Sterile Disposable/Hypodermic Syringe With Needle For Single Use(2Ml :Is10258 Marked:),Consumable [Mis122] , Disposable Syringe(50 Ml),Syrings [Mis44] , Baby Diapers Small(10 Diaper Per Pkt),Consumable [700431] , Adhesive Elastic Tape , Gutta Percha (Gp) With Universal Hand Files For Rtc(As Per Attached Specification),Kit [202209095] , Light Cure Composite(As Per Attached Specification),Kit [202209094] , Feeding Tube (Catheter)(10 G, Each),Consumable [700403] , Folys Catheter(Size 16 Plain),Consumable [202110007] , Infant Feeding Tube(10 G Each Piece, Each),Consumable [700748] , Infant Feeding Tube(7G Each Piece, Each),Consumable [7007481] , Infant Feeding Tube (Catheter) Size: 3G(No.),Consumable [700438] , Infant Feeding Tube (Catheter)(Size: 4G),Consumable [20200725] , Infant Feeding Tube((Catheter) Size: 5G),Consumable [6760003] , Infant Feeding Tube (Catheter) Size: 8G(Each),Consumable [987830] , Infant Feeding Tube(Size: 6G),Consumable [20200726] , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 16- 2 Way Each),Consumable [700851] , Nasal Prong((Each) (Adult)),Consumable [987746] , Nasal Prong Each,Consumable(Neonatal Size 01),Consumable [201397] , Nasal Prong Each,Consumable(Neonatal Size 02),Consumable [201398] , Suction Catheter Assorted(10 No/Each),Consumable [700441] , Suction Catheter Assorted 9 No/Each(Each),Consumable [700440] , Suction Catheter, Sterile(Size Fg 20 (Disposable, Sterile Each)),Consumable [700744] , Suction Catheter, Sterile(Size Fg 22 (Disposable, Sterile Each)),Consumable [700745] , Suction Catheter, Sterile(Size Fg 6 (Disposable, Sterile Each)),Consumable [700746] , Urinary Drainage Bag (Paediatric)(100 Ml / Pc, Each),Consumable [700567] , Collagen Sheets(10 X 10 Cm Sheet),Sheet [4390002] , Self Inflatable Bag With Mask /Adult Each 1000-1700Ml, With Oxygen Connecting Tube ,Should Be Supplied With A Carry Pouch, Should Be Complete With Required Autoclavable Valves And Other Accessories(Should Have Silicon Rubber Bellow To Withstand Autoclave At 134 Degree C) Should Be Multiple Times Autoclavable),Consumable [202308014] , Disposable Pricking Lancet (Pkt Of 200 Units)(Packet),Consumable [6120004] , Surgical Blade Isi Marked, Size 15(100 Per Packet),Surgical Material [Mis123] , Surgical Blade Isi Marked, Size 22(100/Pkt),Surgical Material [Mis124] , Surgical Blade Isi Marked, Size 23(100/Pkt),Surgical Material [Mis125] , Surgical Blade Isi Marked, Size 24(100/Pkt),Surgical Material [Mis126] , Leukoreduction Filter((Bed Side) Post Storage),Consumable [20250902] , Absorbent Bench Underpads (Absorbancy 340Ml),Consumable [20210204] , Disposable Kelly Pad Fabric: Non-Woven, Layered; Spunbound-Meltblown-Spunbound (Sms), Dimensions: Drape: L 76 Cm; W 77 Cm .Drain Pouch: L 38 Cm; W 38 Cm. Drain Tube: L 25 Cm; W 3 Cm,Fenestration Area: Reinforcement(Of Polycoated Fabric,Adsorbent On One Side And Impervious To Fluids On Another Side,With Drain Pouch And Drainage Tube,Packing: Sterile Pack; Double Packed With Outer Pouch Must Be Peel Off Made Of Medical Grade Paper),Consumable [20200748] , X- Ray Developer (22.5 Ltr.) Pkt , X- Ray Film Fixer(22.5 Ltr.) Pkt , Hub Cutter Non Electric Lockable Safety Portable Box For Disposal Of Hypodermic Needles(Cuts The Needle From The Hub Of Machine),Each [700828] , I.V Canulafixater(Transperent Material For Fixation Of I.V. Cannula),Consumable [20200724] , Kellys Pad( Rubber/Each),Consumable [700420] , Plastic Disposable(Shoe Cover),Consumable [202301004] , Synthetic, Monofilament, Nonabsorbable Polyprolene Mesh 7.5 X 15 Cm( Each),Consumable [202212001] , Disposable Sterile Gloves Bis Specification Gloves, Surgical Rubber,Made Of Hypoallergic Latex 100%,Electronically Tested Sterilized By Gamma Irradiatio Eto Is No:13422:1992 As Amended Upto , 7Inch/Pair(Pair),Consumable [6281066] , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized By Gamma Irradiation / Eto Is No : 13422:1992 As Amended Upto, 6 Inch / Pair(Pair),Surgical Material [6281063] , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized By Gamma Irradiation / Eto Is No : 13422:1992,As Amended Upto, 7.5 Inch / Pair(Pair),Consumable [700166] , Disposable Needles Is 10654:2002 (26 G (1 1/2 Inch)),Consumable [202110002] , Disposable Needles Is 10654:2002 (26 G (1 Inch)),Consumable [202110003] , Disposable Syringe With Needle(1Ml Each),Syrings [20201062] , Reuse Prevention Syringe-Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliance To Iso 7886:4 Type I And B,Flow Wrap/ Blister Pkg Using Medical Grade Breathable Paper, Eto Sterilized(10Ml),Consumable [20200741] , Reuse Prevention Syringe-Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliance To Iso 7886:4 Type I And B,Flow Wrap/ Blister Pkg Using Medical Grade Breathable Paper, Eto Sterilized(3Ml),Consumable [987824] , Reuse Prevention Syringe-Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliance To Iso 7886:4 Type I,B, Flow Wrap/Blister Pack Using Medical Grade Breathable Paper, Eto Sterilized(5Ml),Syrings [700023] , Sterile Disposable Insulin Syringe With 31G Needle((Single Unit Pack) Is Marked, 100Iu),Syrings [202211182] , Sterile Disposable Insulin Syringe With 31G Needle((Single Unit Pack) Is Marked, 40 Iu),Syrings [202211180] , I.V Cannula Size With Injection Valve (Port)(18G),Consumable [700271] , I.V Cannula Size With Inj. Valve (Port)(22G),Consumable [121203] , I.V. Cannula With Injection Valve(20G),Consumable [700173] , Iv Cannula With Inj.Valve (Port)(Size 26G Each Consumable),Consumable [121126] , I.V Cannula For Single Use (Intravascular Catheters) Bis (Gauze 22,Length 25) Consumable(Each),Consumable [121201] , I.V. Cannula With Injection Valve(Size 24 G),Consumable [700179] , Disposable(Cap),Consumable [6940001] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 6 Inch/Pair(Pair),Consumable [13001] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 7.5 Inch/Pair(Pair),Consumable [13004] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 7 Inch/Pair(Pair),Consumable [13003] , Disposable Under Pad- Dimention Of Sheet 60*90 Cm(Inside)(Weight 80 Gm Unit),Consumable [121208] , Elbow Length Latex Gloves(Large),Consumable [Mis48] , Elbow Length Latex Gloves(Medium),Consumable [Mis49] , Elbow Length Latex Gloves(Small),Consumable [Mis50] , Utility Gloves(Large),Consumable [Mis161] , Utility Gloves(Medium),Consumable [Mis162] , Disposable Needle 20-G-No(Isi Marked Needle),Consumable [121114] , Disposable Syringe {Auto Disabled (Ad)/Re-Use Prevantion(Rup) Syringe}((For Vitamin K Inj)(1Ml With Needle 26G)),Consumable [121134] , Simcoe I/A Cannula,Direct,(Num),Consumable [Mis110] , Sterile Disposable Insulin Syringe Each (Graduation Upto 100 Units) 30G Needle(40 Units/Ml (30 G Needle, 40Units/Ml)),Syrings [202211181] , Adhesive Plasters Usp(7.5 Cm X 5 Mts/Roll),Consumable [6550014] , Cloth Based Surgical Adhesive Tape Roll(6 Inch X 10M / Roll),Consumable [Mis28] , Latex Examination Gloves (Medium)(100/Pkt)(Packet),Consumable [700555] , Latex Examination Gloves (Small) (100/Pkt)(Packet),Consumable [700556] , Paper Adhesive Microporous Surgical Tape 3 Inch X 5 M / Roll (10 Roll/Pkt)(3 Inch X 5 M / Roll (10 Roll/Pkt)),Consumable [700481] , Paper Adhesive Plaster Microporous Surgical Tape 1 Inch X 9 M / Roll(1 Inch * 9 M/Roll (Iso 13485:2016)),Consumable [700122] , Paper Adhesive Plaster Microporous Surgical Tape(2 Inch X 5M /Roll),Consumable [700124] , Paper Adhesive Plaster Microporous Surgical Tape(4 Inch X 9 M / Roll (Iso 13485:2016)),Consumable [700123] , Paper Adhesive Plaster Microporous Surgical Tape(6 Inch X 5M /Roll),Consumable [700125] , Absorbent Cotton Wool Ip 500 Grms (Each) Roll(Iso:13485:2016),Consumable [6550030] , Radio Opague Catheter With Ptfe/Polyurethine/Fep/Volex Material(Iv Safety Cannula With Luer Lock (G-22)),Consumable [121129] , Radio Opaque Catheter With Ptfe/Polyurethine/Fep/Volex Material(Iv Safety Cannula With Luer Lock (G-18)),Consumable [121127] , Radio Opaque Catheter With Ptfe/Polyurethine/Fep/Volex Material(Iv Safety Cannula With Luer Lock (G-20)),Consumable [121128] , Three Way Conector(100 Mm Extention),Consumable [20201108] , Neonatal(Probe),Consumable [202407004] , Disposable Syringe With Needle 10Ml(Each),Consumable [202212003] , Disposable Syringe With Needle(20Ml Each),Syrings [700443] , Disposable Syringe With Needle(3Ml Each),Syrings [700421] , Cuff For Adult(Size Lenght 22-42/45Cm And Width Minimum 12Cm),Consumable [202401005] , Cuff For Pediatric(Size Lenght 12-22Cm),Consumable [202401006] , Gauze Sponge/Each(Size 3 X 3 Inches),Consumable [202301005] , Flow Meter With Humidifier Bottle(As Per Attached Specification),Consumable [2020760] , Laryngeal Mask Airway (Lma)(No. 3),Consumable [2020767] , Laryngeal Mask Airway (Lma)(No. 4),Consumable [2020768] , Ventury Mask, With Percent O2 Lock + Minimum 2.0 M Tubing Size Adult(As Per Attached Specification),Consumable [2020764] , Umbical Cord Clamps(Plastic Material),Consumable [700322] , Skin Closure Stapler (35 Pins High Quality Medical Grade Plastic,Cartridge With Ss Rectangular Design Pins With Wire Diameter 0.60 Mm And Size After Closure( 7.2 X 4.3 Mm),Consumable [700266] , Titanium Adapter(Each),Consumable [202106005] , Transfer Set (Each),Consumable [202106006] , Absorbent Cotton Wool Ip 500 Grms (Each) Roll(Iso:13485:2016),Consumable [6550030] , Cannula Fixer Set(Piece),Each [700602] , Syringe With Luer Lock Technology(10 Ml Syringe),Syrings [202203011] , Syringe With Luer Lock Technology(5 Ml Syringe),Syrings [202203012] , Disposable Drape For Eye Surgery(Each),Consumable [202206003] , Blood Bag With Acd/Cpd Solution (Disposable Sterilised) With Needle(100 Ml),Bag [700675] , Blood Bag With Acd/Cpd Solution (Disposable Sterilised) With Needle(350 Ml),Bag [700676] , Close Wound Drainage Device Under Negative Pressure(Closed Wound Suction Unit) Size 200 Ml(Catheter Size 16, Each),Consumable [700568] , Close Wound Drainage Device Under Negative Pressure(Closed Wound Suction Unit) Size 200 Ml(Catheter Size 18, Each),Consumable [700569] , Double Lumen Polyurethane Cvp Catheter 4 To 5 Fr(Length 8 To 13 Cm,),Consumable [700865] , Endotracheal Tube No 5.5(Uncuffed),Each [201278] , I.V Cannula (Two Way) Size(16 Nos),Consumable [121202] , Iv Cannula With Inj Valve(16G),Consumable [Mis163] , Paclitaxal Administration(I.V Set),Consumable [202011052] , Triple Lumen Polyurethane Cvp Catheter 7 To 7.5Fr(G-14-16X18x18, Length 16-20 Cm, Each),Consumable [700867] , Triple Lumen Polyurethane Cvp Catheter 7 To 7.5 Fr(G-14-16X18x18x18, Length 15-16Cm, Each),Consumable [700866] , Triway Cannula(3 Way Stop Cock),Consumable [700180] , Abdominal Belt(32 Inch Each),Consumable [700537] , Abdominal Belt(34 Inch Each),Consumable [700680] , Abdominal Belt(36 Inch Each),Consumable [700677] , Abdominal Belt(38 Inch Each),Consumable [700679] , Non-Latex Purple Nitrile Gloves (As Per Attached Specification)(Large),Consumable [20200761] , Non-Latex Purple Nitrile Gloves (As Per Attached Specification)(Medium),Consumable [20200760] , Endotracheal Tube No 6.0(Uncuffed),Each [201279] , Endotracheal Tube,Soft Cuff Towards The Distal End Kink Resistant Inflation Tube Murphy Eye At Distal End With Polished Smoothness Standard 15 Mm Connector Sterile, Single Use Curved Shaped Blister Pack-Suiting The Shape Of Product(Size 3),Tube [700614] , Endotracheal Tube, Soft Cuff Towards The Distal End Kink Resistant Inflation Tube Murphy Eye At Distal End With Polished Smoothness Standard 15 Mm Connector Sterile, Single Use Curved Shaped Blister Pack-Suiting The Shape Of Product(Size 4 , Each),Tube [700613] , Endotracheal Tubes Size 9.5 Cuffed Should Have Low Pressure High Volume Cuff And Radio Opaque Line(Size 9.5 , Each),Consumable [700873] , Reuse Prevention Syringe-Sterile Single Use Reuse Prevention Syringe With Detachable Needles Compliance To Iso 7886:4 Type I,B,Flow Wrap/ Blister Pack Using Medical Grade Breathable Paper, Eto Sterilized(2Ml),Consumable [20200740] , Blood Transfusion Set(Adult),Consumable [201396] , Disposable Scalp Vein Set(Size 20 No),Consumable [700114] , Disposable Scalp Vein Set Size 22 No(Each),Consumable [700115] , Disposable Suction Catheter(Size 12),Consumable [700113] , Disposable Suction Catheter(Size 14),Consumable [700112] , Endotracheal Tube No(2.5(Uncuffed)),Tube [20201060] , Endotracheal Tube No(3.5(Uncuffed)),Tube [202011003] , Endotracheal Tube No 3(Uncuffed),Consumable [202011005] , Endotracheal Tube No(4.0(Uncuffed)),Tube [202011004] , Endotracheal Tube No 4.5(Uncuffed),Tube [202011002] , Endotracheal Tube No 5.0(Uncuffed),Tube [202011001] , Intravenous Set With Airway And Needle (Children)(Surgical Material),Consumable [202011041] , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 18- 2 Way, Each),Consumable [700850] , Micro Volume(Drip Set),Digonstic [6600001] , Ryles Tube (Pvc) Size : Adult: 16(Each),Consumable [987829] , Ryles Tube (Pvc) Size : Adult(18, Each),Tube [700110] , Ryles Tube (Pvc) Size( Children: 10),Consumable [987828] , Ryles Tube (Pvc) Size(Children : 12),Tube [700111] , Ryles Tube(Size 14 Each Piece),Consumable [700750] , Scalp Vein Set(Size 24G, Disposable , Each),Consumable [700893] , Latex Examination Gloves (Large) (100/Pkt)(Packet),Consumable [700554] , Disposable Syringe With Needle(2Ml Each),Syrings [700422] , Disposable Syringe With Needle(5Ml Each),Needle [700437] , Hard Cervical Collar(Large),Consumable [202308008] , Hard Cervical Collar(Small),Consumable [202308009] , Pelvic Binder(Large),Consumable [202308010] , Pelvic Binder(Medium),Consumable [202308011] , Pelvic Binder(Small),Consumable [202308012] , Splints(Long Arm Splint),Consumable [202308001] , Splints(Long Leg Thomas Splint),Consumable [202308003] , Splints(Short Arm Splint),Consumable [202308002] , Splints(Short Leg Thomas Splint),Consumable [202308004] , Phaco(Handpiece),Consumable [202303019] , Reusable Autoclavable Phaco Tip(Size 2.2 Mm With 30 Degree Tips),Consumable [202303017] , Reusable Autoclavable(Tubing),Consumable [202303016] , Reusable Phaco(Sleve),Consumable [202303018] , Bcg(1 Ml Each),Syrings [700840] , Foleys Urinary Catheter 2 Way(Size 22 Each),Consumable [700743] , Follyscathator(Pediatrics),Consumable [202110006] , Follyscathetor 10 No(Pediatrics),Consumable [201282] , Follyscathetor 8 No(Pediatrics ),Consumable [201281] , Latex Based Baloon Capacity (30-50Ml) Foleys Catheter(Size 14- 2 Way Each),Consumable [700849] , Latex Based Baloon (Capacity 30-50 Ml) Foleys Urinary Catheter(3 Way Size 20),Consumable [700874] , Latex Based Baloon Capacity (3Ml) Foleys Urinary Catheter Peadiatrics(2 Way Size 8, Each),Consumable [700852] , Latex Based Baloon Capacity (3Ml) Foleys Urinary Catheter Peadiatrics(Size 10 , Each),Consumable [700853] , Mva Kit (Mannual Vaccum Aspiration Kit)(As Per Attached Specification),Consumable [700890] , Wound Suction Catheter(No 18),Each [700148] , Airway, Nasopharyngeal, Sterile, Single Use, Set With 7.5 Mm(External Diameter),Consumable [202208029] , Hme Filter(As Per Specification),Each [20200503] , I.V Canulafixater(Transperent Material For Fixation Of I.V. Cannula),Consumable [20200724] , Tracheostomy Tube (Pvc) Sterile Single Use - (Adult)(Size 4 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant),Tube [700565] , Tracheostomy Tube (Pvc) Sterile Single Use - (Adult)(Size 5 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant),Tube [700566] , Tracheostomy Tube (Pvc) Sterile Single Use - (Adult)(Size 7 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each),Tube [700563] , Tracheostomy Tube (Pvc) Sterile Single Use - (Adult)(Size 8 Each Piece Soft Flexible Flange At For Each Fixation 15 Mm Connector At Terminal End Which Can Be Rotated In 360 Degree Direction Non-Irritant, Each),Tube [700564] , Disposable Sterile Gloves B.I.S Specification Gloves, Surgical Rubber, Made Of Hypoallergic Latex 100%, Electronically Tested Sterilized By Gamma Irradiation / Eto Is No : 13422:1992 As Amended Upto, 6.5 Inch / Pair(Pair),Consumable [700164] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 6 Inch/Pair(Pair),Consumable [13001] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 7.5 Inch/Pair(Pair),Consumable [13004] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 7 Inch/Pair(Pair),Consumable [13003] , Femoral Catheters Single Lumen Set Adult(Size - 6F To 8F, Length 13 Cm To 15 Cm, Each),Consumable [700811] , Femoral Guide Wires : Straight/J Tip((0.325 Mm Size) Sterile: Ce/Iso13485 Marked),Consumable [700825] , Paediatric Epidural Set(19G Needle, Metal Stylet,22G Catheter,0.22Micron Epidural Catheter Lor Syringe)( ),Consumable [700456] , Spinal Needle(G-22 L-120 Mm),Consumable [700868] , Spectacles For Old Person(Bifocal),Consumable [202210002] , Spectacles For Old Person(Black Safety Goggles),Consumable [202210003] , Spectacles For Old Person(Presbyopia),Consumable [202210001] , Spectacles For School(Children),Consumable [202210004] , Disposable(24-G Each),Needle [700841] , Disposable Needles(Is 10654:2002 22G),Surgical Material [6451076] , Disposable Needles Is 10654:2002(23G),Needle [700843] , Disposable Needles Is(10654:2002 26 G),Needle [700394] , Hypodermic Needles For Single Use Bis Gauze(23 Length, 25 Mm +-1),Needle [700839] , Needle Hypodermic Size Is(10654:2002 23G),Needle [700174] , Needle Hypodermic Size Is(10654:2002 24G),Consumable [987786] , Epidural Set(20 N0.),Consumable [202012041] , Exchange Transfusion Catheter With Four Way Adaptor(Size- 4 Cm, L-40 Cm),Consumable [Mis52] , Hickman Catheter Single Lumen(4.2 Fr),Consumable [202203007] , Hickman Catheter Single Lumen(6.6 Fr),Consumable [202203006] , Long Line Silicon Catheter(G-24, Fr-2, L-30Cm),Consumable [Mis76] , Short Iv Catheter With Straight/J Tip Guidewire(L-20, Fr-2, G-22),Consumable [Mis108] , Short Iv Catheter With Straight/J Tip Guidewire(L-4, Fr-2, G-22),Consumable [Mis109] , Single Umbilical Catheter With Leur Lock(Fr-2 To Fr 2.5, L-40 Cm),Consumable [Mis111] , Single Umbilical Catheter With Leur Lock(Fr-3 To Fr 3.5 , L-40 Cm),Consumable [Mis112] , Single Umbilical Catheter With Luer Lock Stopcock(Fr-4, L-40 Cm),Consumable [Mis113] , Single Umbilical Catheter With Luer Lock Stopcock(Fr-5, L-40 Cm),Consumable [Mis114] , Plaster Of Paris Bandage 10 Cm X 2.7 Mtr / Roll(Roll),Bandage [700226] , Plaster Of Paris Bandage 15Cm X 2.7Mtr / Roll(Roll),Bandage [6030008] , Disposable Drape For Eye Surgery(Each),Consumable [202206003] , Abdominal Belt(32 Inch Each),Consumable [700537] , Abdominal Belt(34 Inch Each),Consumable [700680] , Abdominal Belt(36 Inch Each),Consumable [700677] , Abdominal Belt(38 Inch Each),Consumable [700679] , Blood Transfusion Set(Pediatric),Consumable [20201061] , Paediatric Drip Set(Set),Consumable [700116] , Endotracheal Tube No 5.0(Uncuffed),Tube [202011001] , Colostomy Bag , Collagen Dressing , Illeostomy Bag , Gigli Wire , Merocel (Standard Nasal Dressing) , Pigtail Catheter 8 , Pigtail Catheter With Needle No 10 , Pigtail Catheter With Needle No 12 , Pigtail Catheter With Needle No 14 , Pigtail Catheter With Needle No 16 , Pigtail Catheter With Needle No 18 , Pigtail Catheter With Needle 20 , Intercostal Chest Tube(Ictd) 24 No. , Icd Drain Bag Under Water Drain With Trochar , Chest Trochar With Cannula 22 No. , Chest Trochar With Cannula 28 No. , Chest Trochar With Cannula 30 No. , Chest Trochar With Cannula 32 No. , Romovac Suction Minivac Set Size No 08 , Romovac Suction Minivac Set Size No 10 , Romovac Suction Minivac Set Size 12 , Romovac Suction Minivac Set Size 16 , Romovac Suction Minivac Set Size 18 , Pvc Corrugated Drain , Epidural Set 16 Gauze , Epidural Set 18 Gauze , Epidural Catheter 16 Gauze , Epidural Catheter 18 Gauze , Pediatric Epidural Set 22 Gauze , Pediatric Epidural Set 24 Gauze , Nerve Stimulator Needle 05Cm , Nerve Stimulator Needle 10Cm , Central Venous Catheter (Double Lumen)/(Triple Lumen) , Flexometallic Endotracheal Tube No.5.0 , Flexometallic Endotracheal Tube No. 5.5 , Flexometallic Endotracheal Tube No. 6.0 , Flexometallic Endotracheal Tube No.6.5 , Flexometallic Endotracheal Tube No.7.0 , Flexometallic Endotracheal Tube No.7.5 , Pvc Endotracheal Tube Cuffed No. 5.0 , Pvc Endotracheal Tube Cuffed No. 5.5 , Pvc Endotracheal Tube Cuffed No. 6.0 , Pvc Endotracheal Tube Cuffed No. 6.5 , Pvc Endotracheal Tube Cuffed No. 7.0 , Pvc Endotracheal Tube Cuffed No. 7.5 , Pvc Endotracheal Tube Cuffed No. 8.0 , Spinal Needle 25 Gauze , Spinal Needle 27 Gauze , Ecg Electrode , Dynaplast 15Cm , Povidone Iodine Scrub 7.5% 500 Ml , Surgical Blade 11 No , Soft Cotton Roll 10 Cm , Soft Cotton Roll 15 Cm , Plaster Of Paris Powder , Intravenous Set (Adult) , Adult Diaper , 3-Way Foleys Catheter Size 18,20.22 , Metal Loops , Nichrome Wire Loop , Nichrome Wire Loop 0.5 , Nichrome Wire Loop 1 , Nichrome Wire Loop 2 , Nichrome Wire Loop Straight Wire , Magnetic Stirring Bars , Magnetic Rotors Oval Shape Bars , Magnetic Stirring Bar Retrievers , Blood Transfusion Set(Adult),Consumable [201396] , Follyscathator(Pediatrics),Consumable [202110006] , Folys Catheter(Size 16 Plain),Consumable [202110007] , Suction Catheter Assorted 9 No/Each(Each),Consumable [700440] , Disposable Surgeon Cap With Cable Tie(Each),Consumable [202206004] , Endotracheal Tube No(2.5(Uncuffed)),Tube [20201060] , Endotracheal Tube No(3.5(Uncuffed)),Tube [202011003] , Endotracheal Tube No 3(Uncuffed),Consumable [202011005] , Endotracheal Tube No(4.0(Uncuffed)),Tube [202011004] , Endotracheal Tube No 4.5(Uncuffed),Tube [202011002] , Umbical Cord Clamps(Plastic Material),Consumable [700322] , Disposable Spinal (L.P.) Needle(25G),Surgical Material [6451074] , Disposable Spinal Needle(22 No),Each [700130] , Electric Cautery Lead/Each-Disposable Electro Surgical Pencil-4Cm(Each),Each [120864] , Endotracheal Tube Internal With Radioopaque Line(Dia 2.5 Mm To 5 Mm, Each),Consumable [700872] , Hmef, Filter, Heat And Moisture Exchanger With Viral Filter (Hmef), High Efficiency(With Connectors,Single Use Certification Required For Viral Filtration),Consumable [2020761] , Mask Oxygen With Connection Tube, Reservoir Bag And Valve, High Concentartion(Adult),Consumable [202204018] , Mask Oxygen With Connection Tube, Reservoir Bag And Valve, High Concentartion, Paediatric/ Non-Rebreathing Mask(Oxygen Mask With Reservoir Bag),Consumable [202204019] , Nasal Prong(Adult),Consumable [2020771] , Nasal Prong Each,Consumable(Infant),Consumable [201399] , Nasal Prong Each,Consumable(Pediatric),Consumable [201400] , Non-Invasive Masks For Niv Therapy Large Size(As Per Attached Specification),Consumable [2020763] , Non-Invasive Masks For Niv Therapy Medium Size( As Per Attached Specification),Consumable [2020762] , Oropharyngeal Airway,(Size 1),Consumable [202208023] , Oropharyngeal Airway,(Size 2),Consumable [202208024] , Oropharyngeal Airway,(Size 5),Consumable [202208025] , Polyethylene High Pressure Extension Tube(Length - 150Cm),Consumable [Mis94] , Silicon Mask Adult Size 3 With Connection Tube, Reservoir Bag And Valve, High-Concentration, Adult(Bains Circuit),Consumable [202208026] , Silicon Mask Adult Size 4 With Connection Tube, Reservoir Bag And Valve, High-Concentration, Adult(Bains Circuit),Consumable [202208027] , Silicon Mask Size 0 Paediatric With Connection Tube, Reservoir Bag And Valve, High-Concentration, Paediatric(Jackson Rees Circuit),Consumable [2020769] , Silicon Mask Size 1 Paediatric With Connection Tube, Reservoir Bag And Valve, High-Concentration, Paediatric(Jackson Rees Circuit),Consumable [2020770] , Cloth Based Surgical Adhesive Tape Roll(1 Inch X 5 Mtr / Roll),Consumable [700887] , Cervical Collar/Each-Soft,(Medium Sized),Consumable [700430] , Compatible Filter Tips For M/S Sartorius Make Multi Channel Pipette (8 Channel) 10 Microliter - 100 Microliter:(1 Box Of 10 Packs),Consumable [202401025] , Compatible Filter Tips For M/S Sartorius Make Multi Channel Pipette (8 Channel) 30 Microliter - 300 Microliter:(1 Box Of 10 Packs),Consumable [202401026] , Compatible Filter Tips For M/S Sartorius Make Multi Channel Pipette (8 Channel) 5 Microliter - 50 Microliter:(1 Box Of 10 Packs),Consumable [202401024] , Bss (Balance Salt Solution ) 500 Ml. Bottle , Alcohol (Absolute)(500 Ml),Consumable [122008] , Bile Esculin Agar(100 Gm),Consumable [121021] , Bile Salt Agar(100 Gm),Consumable [121020] , Blood Agar Powder(500 Grm),Consumable [Mis19] , Carbolic Acid Phenol(500Ml),Consumable [121186] , Cetrimide Agar(100 Gm),Consumable [121022] , Cled Agar(500 Gm),Consumable [121014] , Edta Solutions K3(500 Ml Bottle),Consumable [700752] , Fouchets Reagent(100 Ml Bottle),Consumable [Mis56] , Gram Staining Kit(125Ml X 4),Consumable [800101] , H2so4 (Sulphuric Acid)(25% 500 Ml Bottle),Consumable [700535] , Macconckeys Agar(500Grm),Consumable [Mis77] , Methylated Spirit(500 Ml Bottle),Consumable [121189] , Methyl Blue For (Z N)(125 Ml Bottle),Consumable [Mis80] , Nutrient Agar(500 Grm),Consumable [Mis88] , Nutrient Broth(500 Gm),Consumable [121008] , Phenolic Compound/Phenol Crystal Chemical Name: Phenol, Chemical Structure: C6h5oh, Molecular Wt: 94.11, Melting Point:40 C+2 Purity: 99.5%(500 Gm Glass Bottle),Consumable [121190] , Sabourauds Dextrose Agar Powder(100Gms),Consumable [Mis104] , Absorbable Gelatine Sponge(Ip 80Mm X 50Mm X 10Mm),Consumable [6270001] , Films Of Size 10X12 Inches Compatible Films To Dr System(10X12 Inches),Film [202111003] , Films Of Size 11X14 Inches Compatible Films To Dr System(11X14 Inches),Film [202111002] , Films Of Size 14X17 Inches Compatible Films To Dr System(14X17 Inches),Film [202111001] , Films Of Size 8X10 Inches Compatible Films To Dr System(8X10 Inches),Film [202111004] , Sterile Alcohol(Swabs),Consumable [202203014] , Tourniquet With Belt (Good Quality Pairs)(Each),Consumable [700237] , Covid-19 (Sars-Cov-2)(Specific Rapid Antigen Test Kit),Kit [20210402] , Hiv Kit(Card),Kit [5400014] , Viral Transport Media With Swabs(As Per Attached Specification),Consumable [Mis1005] , Widal Slide Test(4X5ml With Control),Consumable [73001] , Disposable Sterile Gloves Isi Marked Surgical Rubber Made Of Hypoallergic Latex 100% , Electronically Tested Sterilized By Gamma Irradiation/ Eto Is No:13422:1992 As Amended Upto, Powder Free 6.5 Inch/Pair(Pair),Consumable [13002] , Trypan Blue(0.06% 1 Ml),Solution [140104] , Disposable Sharp Collection Containers(1.5 L),Consumable [700246] , Disposable Sharp Collection Containers(5 Ltr),Consumable [700294] , Disposable Three Layer Surgical Mask(As Per Attached Specification),Mask [700454] , Falcon Tube (Conical Bottom)(50Ml Each Plastic Containers With Air Tight Screw Cap Printed Graduation),Consumable [121187] , Nebulization Mask-Kit(Adult),Mask [700025] , Nebulization Mask - Kit(Pediatrics),Consumable [700323] , Oxygen Mask Adult(Standard Size),Mask [6601029] , Oxygen Mask Paediatric(Standard Size),Mask [4390003] , Plain Vial With Screw Cap (12X75),Consumable [7410047] , Safe Delivery Kit-1 Plastic Desposable Gown (Non Woven Plastic Laminated, Leak Proof)-2(4*4),(2) Disposable Goggles For Protection Of Eyes-2 (Free Size),(3) Face Mask-2 Free Size (4) Plastic Disposable Cap (Non Woven Plastic Laminated,Leak Proof)((-1Pair,(5)Long Gloves Elbow Length-2Pairs(6 1/2 And 7) (6)Disposable Shoe Covers Till Calf (Plastic)-2Pair Umbical Cord Clamps- Plastic Material(1Pair)(Free Size)(As Per Attached Specification))),Consumable [121130] , Screw Cap Vial With O Ring (2Ml),Screw Cap,Leak Proof Self Standing/Flat Bottom With O Ring, Un Graduated,Polypropylene/Polyethylene,2Ml Capacity Each(Each),Consumable [130011] , Sputum Container(100 Per Box),Consumable [121191] , Sterile(Gauze),Consumable [202203013] , Test Tube, Leak Proof, Ungraduated, Polypropylene/Polyethylene Capacity 5Ml Each(Each),Consumable [130010] , Urinary Drainage Bag Cap With Non Return Valve (Eo Sterile)(2 Litre, Each),Consumable [700876] , White Translucent Puncture Proof Container Size(2 Litre),Consumable [202011047] , Anti Hcv Antibody Kits (Elisa)(As Per Attached Specification),Consumable [202012033] , Cotton Crape Bandage(10Cm X 4M),Consumable [987731] , Cotton Crape Bandage(15Cm X 4M),Consumable [987730] , Hcv Kit Card(Test),Digonstic [5400015] , Hiv (Rapid)(Whole Blood Finger Prick Test Kit),Consumable [121198] , Serum Creatinine(100 Ml Bottle (2 X 50 Ml)),Consumable [700735] , Troponin 1 Kit(10 Test Per Pack),Consumable [700550] , Uric Acid(50 Ml(2 X 25 Ml),Consumable [121133] , Blood Urea Reagent Kit(200Ml (2X100ml)),Consumable [Mis20] , Leishman Stain(500 Ml Bottle),Consumable [Mis75] , Rpr Test Kit(100 Test),Kit [Mis103] , Bilirubin Kit (Colorimeter Semi Auto)(4X60 Ml 480 Test/Kit),Consumable [987758] , Cholesterol Kit End Point Enzymatic Kit(5X20ml 200 Test/Kit),Consumable [987759] , Serum Amylase(2X25 Ml),Consumable [20210732] , Triglyceride Kit Enzymetic(5X20ml 200Test/Kit),Consumable [987761] , Calibration Instrument/Rod(Make Thorasys),Consumable [202401010] , Humidification Water Chamber:Consumable [202402001] , Mouth Piece Filter For Fot Consumable [202401009] , Nasal Cannual Prongs-(Extra-Large > 5 Kg),Consumable [202402006] , Nasal Cannual Prongs-(Extra Small < 1 Kg),Consumable [202402002] , Nasal Cannual Prongs-(Large < 2-5 Kg),Consumable [202402005] , Nasal Cannual Prongs-(Small < 1-2 Kg),Consumable [202402003] , Cyphenothrin(5% Ec),Consumable [20210225] , Cr System Cassette Size(10X12),Consumable [202210021] , Cr System Cassette Size(14X17),Consumable [202210022] , Cr System Cassette Size(8X10),Consumable [202210023] , Cr System Film(Size 10X12),Consumable [21100202] , Cr System Film(Size 14X17),Consumable [21100203] , Cr System Film(Size 8X10),Consumable [2110021] , Films Size(10X12 Inches),Consumable [202402035] , Films Size(8X10 Inches),Consumable [202402034] , Black-Braided Silk With 1/2 Cir Cutting Needle 30Mm Length 75 Cm(1/0 12 Foils/Pkt),Consumable [Mis18] , Bone Wax Sterilised(2.5 Gm/Packet)(Consumable),Consumable [121124] , Catgut Chromic With 1/2 Cir Cutting Needle 12Mm(Length 70Cm No.3-0, 12 Foils Per Pakt),Consumable [700458] , Chromic Catgut (12 Foils/Pkt)(Size:1/0 Length At Least 150 Cm),Consumable [987772] , Polyamide Mono Filament (Nylon) With 1/2 Cir Cut Needle 20/16 Mm Length 70 Cm Size 2/0(12 Foils/Pkt),Consumable [121206] , Measure Volume(Drip Set),Each [700117] , Iohexol Injection 350 Mg Iodine/Ml(50 Ml Vial),Injection [202211183] , Bio Medical Waste Bins Blue (15 Liter),Consumable [202011031] , Bio Medical Waste Bins Blue (25 Ltr),Consumable [202011035] , Bio Medical Waste Bins Blue(40 Ltr),Consumable [202011038] , Bio Medical Waste Bins Red(15 Ltr),Consumable [202011034] , Bio Medical Waste Bins Red(25 Ltr),Consumable [202011033] , Bio Medical Waste Bins Red(40 Ltr),Consumable [202011037] , Bio Medical Waste Bins Yellow(15 Liter),Consumable [202011032] , Bio Medical Waste Bins Yellow(25 Ltr),Consumable [202011036] , Bio Medical Waste Bins Yellow(40 Ltr),Consumable [202011039] , Ecg Jelly 250 Gms(Bottle),Jelly [700024] , Echo Jelly 250Ml Bottle(Bottle),Jelly [700199] , Sanitizing Agent(50 Ml),Bottle [202209093] , Electrolyte Concentrate(10 Litre/Pack),Consumable [202208022] , Urine Container Size Of The Container Shall Be 30Ml Disposable(50 Per Pkt),Consumable [7004071] , Usg Gel(250 Ml Bottle),Consumable [700740] , 0.2 Ml Pcr Tube(Sterile, Flat-Cap Shaped),Consumable [20200826] , Acid Fast Staining Kit (Carbol)(125Ml X 3),Consumable [800102] , Columbia Blood Agar Base(500 Gm),Consumable [121013] , Cristensens Urea Agar Base(100 Gm),Consumable [121016] , Diluent For Dna Extraction/ Ethanol, Molecular(Biology Grade 500Ml),Consumable [2020777] , Glucose Phosphate Broth(100 Gm),Consumable [121015] , Imipenem 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121025] , Isopropanol, Molecular(Biology Grade 500Ml),Consumable [20200827] , Muller Hinton Agar(500 Gm),Consumable [121009] , Multipurpose Labelling(Tag),Consumable [2020787] , Nalidixic Acid 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121028] , Para Film Sealing Film, Quantity 510 Roll, Rate Should Be Quoted For Per Roll, Parafilm, 100 Mm Width, 58M Length, Should Withstand At Temprature Between -40Deg C To +50Deg C(100 Mm Width, 58M Length),Consumable [202011049] , Piperacillin 100 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [0121035] , Potassium Permanganate, Powdered(Analytical Grade 500 Gm),Consumable [20200829] , Rnase/ Dnase Away Solution, For Complete Removal Of Rnase/ Dnase Contamination From Work Surfaces, Pipettes And Equipments(Should Be Stable At Room Temperature),Consumable [2020783] , Salmonella Shigella Agar(100 Gm),Consumable [121017] , Selenite F Broth(100Gm Pack),Consumable [121007] , Simmons Citrate Agar(100 Gm),Consumable [121011] , Swab Stick With Tube-Sterile(70-80 Mm Length 10- 15 Mm Diameter), Unit 1(100/Pkt , Packet),Consumable [700685] , Tcbs Agar(100 Gm),Consumable [121019] , Teicoplanin 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121034] , Triple Sugar Iron Agar(100Gm Pack),Consumable [121006] , Test Card For Abg Machine(For Abg M/C),Consumable [202302003] , Therma Col Box For Falcon Tube (Box Size Should Contain Minimum 2 Falcon Tube (9X6x6)(Box Size Should Contain Minimum 2 Falcon Tube (9X6x6)),Consumable [202011097] , Bmw Polybags Blue Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210608] , Bmw Polybags Blue Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210609] , Bmw Polybags Blue Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210607] , Bmw Polybags Red Colour(Sizes 28 Kg (As Per Attached Specification)),Bag [20210612] , Bmw Polybags Red Colour(Sizes 45 Kg (As Per Attached Specification)),Bag [20210613] , Bmw Polybags Red Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210610] , Bmw Polybags Yellow Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210605] , Bmw Polybags Yellow Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210606] , Cr System Cassette For Konica Minolta(Size 10X12),Consumable [202308024] , Cr System Cassette For Konica Minolta(Size 14X17),Consumable [202308023] , Cr System Cassette For Konica Minolta(Size 8X10),Consumable [202308025] , Cr System Film For Konica Minolta Size(Size 10X12),Consumable [202308021] , Cr System Film For Konica Minolta Size(Size 14X17),Consumable [202308020] , Cr System Film For Konica Minolta Size(Size 8X10),Consumable [202308022] , Compatible Feno(Sensor Circassia Ab),Consumable [202401008] , Mouth Piece Filter For Feno(Make Circassia Ab),Consumable [202401007] , Indelible Ink Marker(Pen),Consumable [Con210101] , G6pd Deficiency(Test Kit - 10 Test),Consumable [5400011] , Reagent For Hdl Cholestrol Test(100 Ml (4 X 25)),Consumable [700856] , Abdominal Drain(Set 32 No),Each [Mis05] , Disposable Circuit For Ventilator(As Per Specification),Surgical Material [20200504] , Disposable Nasal Canula Compatible For Heated Humidified High Flow Oxygen Therapy(Adult Size),Consumable [20200844] , Disposable Nasal Canula Compatible For Heated Humidified High Flow Oxygen Therapy(Neonatal Size),Consumable [20200845] , Bmw Polybags Blue Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210608] , Bmw Polybags Blue Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210609] , Bmw Polybags Blue Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210607] , Bmw Polybags Red Colour(Sizes 28 Kg (As Per Attached Specification)),Bag [20210612] , Bmw Polybags Red Colour(Sizes 45 Kg (As Per Attached Specification)),Bag [20210613] , Bmw Polybags Red Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210610] , Bmw Polybags Yellow Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210605] , Bmw Polybags Yellow Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210606] , Blood Grouping Kit Having Anti Sera A Monoclonal(10 Ml Vial), Anti Sera B Monoclonal(10 Ml Vial) And Anti Sera D Monoclonal(10 Ml Vial),Consumable [20201039] , Solubility Test Kit (For Sickle Cell), As Per Attached Specification, Control Sample Is Not Mandatory Acessories Required- 1. Dropper 2.Test Tube (Standard Size)/Vial 3. Reading Stand 4.Micropipette With Tip/Capillary Tube 5.Lancet(6.Alcohol Swab , Kit),Kit [131145] , Malaria Bivalent Antigen-Detecting Rapid Diagonstic Tests(Rdts) For P.F And Pv (10 Card, 10 Capillary,1 Buffer Solution,10 Alcohol Swab,10 Sterile Lancet(0.15 Mm To 0.75Mm Diameter Needle Based Lancet Mounted On Small Non Metallic Pedastal For Pricking,(Pack Of 10 Test., Rate Shall Be Quoted For Pack Of 10),Specification Attached),Consumable [20200730] , Dual Testing Kit For Hiv And Syphilis Screening, Rapid Diagnostic Test Kit(Total No. Of Test 900000),Consumable [20250901] , Serum T3 Kit, Elisa(96 Test Kit Each),Consumable [700551] , Serum T4 Kit, Elisa(96 Test Kit Each),Consumable [700552] , Serum Tsh Kit, Elisa(96 / Pkt),Consumable [700553] , Cover Slip With Isi Marked Size:18X18mm(+/- 1.00Mm),Thikness 0.13.. To 0.17Mm(Pkt Of 50 Pieces),Consumable [700416] , Blood Bag Double 350Ml(As Per Attached Specification),Each [121210A] , Blood Bag Triple 350Ml As Per Attached Specification(Each),Bag [121200] , Blood Bag Triple -Sagam 350Ml(Each),Bag [121212] , Blood Bag Triple -Sagam 450Ml(As Per Attached Specification),Each [121211] , Leukoreduction Filter (Lab Side) Prestorage(As Per Attached Specification),Consumable [20250903] , Minicap (Capd) With Povidon Iodine(Each),Consumable [202106004] , Quadruple Blood Bags As Per Attached Specification(Each),Consumable [121204] , Single Blood Bag(As Per Attached Specification),Each [121213] , Soda Lime 5 Kg. Pkt , Top And Bottom Bags For Leukoreduction(As Per Attached Specification),Consumable [20250904] , Dpx Mountant , Xylene Rectified , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (0.5 - 10 Microliter):(1 Box Of 10 Packs),Consumable [202401027] , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (100 - 1000 Microliter):(1 Box Of 10 Packs),Consumable [202401029] , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (10 - 100 Microliter):(1 Box Of 10 Packs),Consumable [202401028] , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (20 - 200 Microliter):(1 Box Of 10 Packs),Consumable [202401031] , Compatible Filter Tips For M/S Abdos Labtech Pvt Ltd Make Micropipettes (2 - 20 Microliter):(1 Box Of 10 Packs),Consumable [202401030] , Sanitary Napkins(As Per Attached Specification/Pack Of 6 Pads),Consumable [Mis106] , Antibody Screening(11 Cell Panel),Consumable [202402021] , Antibody Screening(3 Cell Panel),Consumable [202402020] , Antibody Titre(Na),Consumable [202402018] , Blood Grouping(Forward),Consumable [202402012] , Blood Grouping(Reverse),Consumable [202402013] , Cross Matching(Na),Consumable [202402014] , Direct Coombs Test(Dct),Consumable [202402017] , Indirect Coombs Test(Ict),Consumable [202402016] , Phenotyping(Na),Consumable [202402019] , Rare Blood Grouping Testing(Na),Consumable [202402015] , Weak D Testing(Na),Consumable [202402022] , Dengue Ns-1 Elisa (Antigen) Kit(Pack Of 96/As Per Attached Specification In Tender),Consumable [700473] , Hiv (Rapid) Test Kit-2(As Per Attached Specification),Kit [202303009] , Basic Fuchsin Chemical Name:Pararosaniline Hydrochloride,Chemical Structure C20h20cin3 Mol Wt:337.86 Dye Content: Approx 85% 88% Dye Content Must Be Mentioned Color: Metalic Green(25 Gms Glass Bottle),Consumable [121138] , Formaldehyde 40% (Conc. Formaline)(1 X 30 Lit),Consumable [710021] , Glacial Acetic Acid (Liquid) (100 Ml Bottles),Consumable [202110008] , N/10 Hcl (100 Ml),Consumable [202110010] , Sulphuric Acid(500Ml Glass Bottle),Consumable [121192] , Pyrethrum Extract 2%(25 Litre Drum)(As Per Specification Attached In Tender),Chemical , Acetic Acid - Solution(3% 100 Ml Bottle),Consumable [987846] , Acetone Detection Kit(100 Gm),Powder [Mis07] , Albumin Reagent Kit, 200Ml(4*50 Ml),Consumable [121135] , Alkaline Phosphatase(100 Ml (5 X 20)),Consumable [700855] , Aso Kit(25 Test/Packet),Consumable [Mis10] , Auto Pippets Fixed Volume(1000 Micro Liters Each),Consumable [Mis12] , Auto Pippets Fixed Volume(10 Micro Liters Each),Consumable [Mis11] , Auto Pippets Fixed Volume(20 Micro Liters Each),Consumable [Mis13] , Barium Chloride 10%(500 Ml Bottle),Consumable [Mis14] , Crp Test Kit(Latex/Card),Kit Of 25 Tests(25 Test / Kit),Consumable [Mis33] , Field Stain A(500Ml),Consumable [5410005] , Field Stain B(500Ml),Consumable [Mis53] , Formaldehyde Solution(Analytical Grade 500Ml),Consumable [20200830] , Glucose Kit (God/Pod)(350Ml),Consumable [Mis60] , Hdl Kit Ppt(2X50ml 200 Test/Kit),Consumable [987760] , Ldh Kit Pack(50 Ml Bottle),Consumable [700603] , Platelet Dilution Fluid(100 Ml),Consumable [Mis91] , Ra Factor Rapid Kit 1)Should Be Based On Latex Agglutination Slide Test 2)Qualitative And Semi Quantative Testing Facility Possible 3)Test Speed Must Be Less Than 2 Minutes(Test),Consumable [700756] , Rbc Dialuation Fluid(500 Ml Bottle),Consumable [Mis98] , Safranine (Gram Stain)(500 Ml Bottle),Consumable [Mis105] , Semen Dilution Fluid(100 Ml Bottle),Consumable [Mis107] , Sgot(25 Ml),Consumable [700736] , Sgpt100 Ml(4 X 25),Consumable [700854] , Sodium Citrate 3.8%(500 Ml Bottle),Consumable [Mis115] , Total Protein Test Kit(100 Ml Bottle),Consumable [700429] , Urea Kit Berthelot(100 Test/Kit),Consumable [Mis142] , Wbc Diluting Fluid(500 Ml Bottle),Consumable [Mis144] , N-95 Mask (Without Exhalation Valve)(As Per Specification),Consumable [20200710] , Salt Testing Kit(As Per Attached Specification , Kit),Consumable [6400013] , Capillary Tube(100 Pieces),Consumable [202301003] , Ecg Paper (Chemical Coated)(80Mmx 20 Mtr Each),Consumable [700538] , Face Sheild(As Per Specification),Consumable [20200505] , Fixer Powder (Fixer With Hardner) (22.5 Ltr/Pkt)(22.5Ltr/Pkt),Consumable [202011099] , Gram Iodine (Gram Stain)(100Ml Bottle),Consumable [700186] , Lugols Iodine (5% Solution) (Potassium Iodine-10% W/V And Iodine-5% W/V(100 Ml Bottle),Consumable [202212004] , Micro Pipette Tips 5-300Ul(100 Per Pack),Consumable [80002] , X-Ray Film Fixer(Powder To Make 13.5 Liters-Pkt),Consumable [700539] , X-Ray Film Fixer(Powder To Make 9 Liters-Pkt),Consumable [700540] , Disposable Adhesive Eye Dressing With Non Adherent Pad(Each),Consumable , Dead Body Bags(As Per Attached Specification),Consumable [20200823] , Big Repackaging Box Specifications(24-Inch Length X18 Inch Width X 18 Inch Height),Consumable [202305007] , Packing Kit Each Kit Contains As Per Specification(1. Plastic Bori- 10 Quantity, 2. Carton Tape- 01 Quantity, 3. Marker- 01 Quantity, 4. Plastic Rope- 01 Quantity),Consumable [202012183] , Sleeve (Cp) Green For 3Fdc Drugs (Type - A)(As Per Attached Technical Specification),Consumable [202305010] , Sleeve (Cp) Green For 3Fdc Drugs (Type - B)(As Per Attached Technical Specification),Consumable [202305011] , Sleeve (Cp) Green For 3Fdc Drugs (Type - C)(As Per Attached Technical Specification),Consumable [202305012] , Sleeve (Ip) Red For 4Fdc Drugs (Type - A)(As Per Attached Technical Specification),Consumable [202305008] , Sleeve (Ip) Red For 4Fdc Drugs (Type - B)(As Per Attached Technical Specification),Consumable [202305009] , Films Of Size 10X12 Inches Compatible Films To Dr System(10X12 Inches),Film , Films Of Size 11X14 Inches Compatible Films To Dr System(11X14 Inches),Film , Films Of Size 14X17 Inches Compatible Films To Dr System(14X17 Inches),Film , Films Of Size 8X10 Inches Compatible Films To Dr System(8X10 Inches),Film , Bmw Polybags Blue Colour For Sizes 18Kg(As Per Attached Specification),Consumable , Bmw Polybags Blue Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210608] , Bmw Polybags Blue Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210609] , Bmw Polybags Blue Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210607] , Bmw Polybags Red Colour For Sizes 18Kg(As Per Attached Specification),Consumable , Bmw Polybags Red Colour(Sizes 28 Kg (As Per Attached Specification)),Bag [20210612] , Bmw Polybags Red Colour(Sizes 45 Kg (As Per Attached Specification)),Bag [20210613] , Bmw Polybags Red Colour(Sizes 5Kg (As Per Attached Specification)),Bag [20210610] , Bmw Polybags Yellow Colour For Sizes 18Kg(As Per Attached Specification),Consumable [Mis203] , Bmw Polybags Yellow Colour(Sizes 28Kg (As Per Attached Specification)),Bag [20210605] , Bmw Polybags Yellow Colour(Sizes 45Kg (As Per Attached Specification)),Bag [20210606] , Sodium Hypochlorite 5% Solution(5 Ltr),Solution [4630027] , Cpk-Mb Kit (Kinetic)(25 Test/Kit),Consumable [Mis31] , Poc Kit For Syphilis (As Per Attached Specification)(10 Test Per Pack),Consumable [Mis92] , Alcohol Based Hand Sanitizer(500 Ml Bottle),Contain , Isopropyl Alcohol Not Less Than 75% V/V Or Ethanol Not Less Than 80% V/V , Hydrogen Peroxide,0.125%V/V , Glycerol 1.45 % V/V, Distilled Water/Purified Water / De-Mineralised Water(500 Ml Bottle),Consumable [202202008] , Alcohol Based Hand Sanitizer (500Ml Bottle With Dispenser),Contain, Isopropyl Alcohol Not Less Than 75% V/V Or Ethanol Not Less Than 80% V/V , Hydrogen Peroxide,0.125%V/V, Glycerol 1.45 % V/V, Distilled Water/Purified Water / De-Mineralised Water(500Ml Bottle With Dispenser),Consumable [202202004] , Micro Centrifuge Tube 1.5 Ml , Polypropylene Tubes, Resistance To Chemicals, Mechanical Stress And Temperature Extremes,(Autoclavable, Dnase Rnase/Endotoxine Free),Consumable [2020775] , Test Tube Stand, Polypropylene, 3 Tier(For Keeping 10 Ml Vtm Vials/ Tier),Consumable [20200834] , Liquid Paraffin(500 Ml, Bottle),Solution [4410002] , Cold Sterilant Solution(5 Ltr Can),Consumable [202301002] , Fogger Solution 5 Lit Cane Containing Of Hydrogen Peroxide(I.P-11.0% W/V And Silver Nitrate Dilute-0.01% W/V),Consumable [202301001] , Glutaraldehyde Solution 2% In 5 Litre Can (2 Strips/Vials Per Each Can)(5 Litre Can),Consumable [700591] , Hiv (Rapid) Test Kit-3(As Per Attached Specification),Kit [202303010] , Collection Tube Polystrene(100 Per Pack),Consumable [80001] , Cryogenic Vials(1.8Ml Sterile External Thread),Consumable [202202009] , Micro Centrifuge Tube2 Ml Polypropylene Tubes, Resistance To Chemicals,(Mechanical Stress And Temperature Extremes, Autoclavale, Dnase Rnase/ Endotoxin Free),Consumable [2020776] , Screw Cap Vial With O Ring (2Ml),Screw Cap,Leak Proof Self Standing/Flat Bottom With O Ring, Un Graduated,Polypropylene/Polyethylene,2Ml Capacity Each(Each),Consumable [130011] , Steralised And Autoclavable Culture Tube Flat Bottom, 5Ml (Plastic)(Each),Consumable [130012] , Sterile Pasteur(Pipettes 3Ml),Consumable [20200831] , Glucometer Strips 1 Should Be Able To Use Capillary Blood Samples 2 Should Have Expiry As Printed On The Label Of The Supplied Box(3 All Strips Should Have At Least One Year Expiry Date From The Date Of Supply 1 Glucometer Free With Each 1 Thousand Strips Rate Should Be Quoted For 50 Strip/Packet),Consumable [700610] , K3 Edta Evacuated Blood Collection Tube(3Ml (100 Tube/Pkt)),Consumable [202407003] , Sanitary Napkins(As Per Attached Specification/Pack Of 6 Pads),Consumable [Mis106] , Cresol With Soap Solution Ip(5 Liter Jar),Consumable [2020105] , Amikacin 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121024] , Amoxyclav (Amoxycillin/Clavulanic Acid) 20/10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121029] , Ampicillin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121042] , Azithromycin 15 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121048] , Brain Heart Infusion Broth(500 Gm),Consumable [121012] , Cary Blair Medium Base(100 Gm),Consumable [121018] , Cefazoline 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121041] , Cefoperazone 75 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121038] , Ceftazidime 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121040] , Ceftriaxone 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121032] , Cefuroxime 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [0121033] , Chloramphenicol 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121046] , Ciprofloxacin 5Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121031] , Clindamycin 2 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121051] , Colistin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121037] , Co Trimoxazole(Sulpha/Trimethoprim) 25 Mcg (23.75/1.25)(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121026] , Doxycycline Hydrochloride 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121045] , Erythromycin 15 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121050] , Gentamicin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121030] , Levofloxacin 5 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121049] , Nitrofurantion 300 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121027] , Norfloxacin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121036] , Penicillin 10 Units(50-100 Disc Per Pack),Consumable [121052] , Piperacillin/Tazobactam 100/10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121039] , Polymyxin B(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121044] , Sabroud Dextrose Agar With Chlorophenicol(100 Gm),Consumable [121010] , Teicoplanin 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121034] , Tetracycline 30 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121047] , Tobramycin 10 Mcg(1 Packet Of 5 Vial (Each Vial Of 100 Disc)),Consumable [121043] , Vancomycin 30 Mcg(50-100 Disc Per Pack),Consumable [121053] , Hbs-Ag Elisa Test Kit(As Per Attached Specification),Kit [202307001] , Hiv Elisa Test Kit, Pack Size 96 Wells Per Kit(1 Kit Containing 96 Wells (As Per Attached Specification)),Consumable [202011053] , Conventional Medical X-Ray Film-Polyster Based Imaging Film 30.5Cmx30.5Cm (12X12)(Size-50 Sheet In One Packet),Consumable [7004063] , Conventional Medical X-Ray Film-Polyster Based Imaging Film 35.6Cmx35.6Cm (14X14)(Size-50 Sheet In One Packet),Consumable [7004062] , Conventional Medical X-Ray Film-Polyster Based Imaging Film 35.6Cmx43.2Cm (14X17)(Size-50 Sheet In One Packet),Consumable [7004061] , Conventional X-Ray Film 10X12(50 Sheet/Pack),Consumable [7004065] , Conventional X-Ray Film 12X15(50 Sheet/Pack),Consumable [7004064] , Conventional X-Ray Film 8X10(50 Sheet/Pack),Consumable [7004066] , Truenat (Mtb Chips),Consumable [202306001] , Truenat (Rif Chips),Consumable [202306002] , Bag(Spikes),Consumable [202305001] , Bacillus Thuringiensis Var Israeliensis(5% Wp),Consumable [202208001] , Sputum Container(100 Per Box),Consumable [121191] , Electric Cautery Lead/Each-Disposable Electro Surgical Pencil-4Cm(Each),Each [120864] , Dengue Ns-1 Elisa (Antigen) Kit(Pack Of 96/As Per Attached Specification In Tender),Consumable [700473] , Blood Bag Triple -Sagam 450Ml(As Per Attached Specification),Each [121211] , Bacillus Thuringiensis Var Israeliensis 5%(As (Aqueous Suspension)),Consumable [202208002] , Collection Tube Polystrene(100 Per Pack),Consumable [80001] , Liquid Paraffin 50Ml(Bottle ),Consumable [700549] , Screw Cap Vial With O Ring (2Ml),Screw Cap,Leak Proof Self Standing/Flat Bottom With O Ring, Un Graduated,Polypropylene/Polyethylene,2Ml Capacity Each(Each),Consumable [130011] , Steralised And Autoclavable Culture Tube Flat Bottom, 5Ml (Plastic)(Each),Consumable [130012] , Inj Ganciclovir500 Mg , Solution Hydrogen Peroxide 500 Ml , Sol. Sodium Hypochloride Solution 5%(500 Ml Bottle) , Liquid Paraffin Heavy (Grm6362-500Ml) , Liquid Paraffin Light (Grm1310 -500Ml) , Absolute Alcohol 500Ml , H2o2 100Ml , Indian Ink Dye Grm5259/ 23Ml , Lugols Iodine S-01 (125Ml) , Xylene (Hi-Lr) As078 (500Ml) , Ph Buffer (100Ml) , Alpha Naphthoilamine R009-100Ml , Sulfanilic Acid R015-100Ml , Acetic Acid Mb052-500Ml , Petroleum Jelly Grm1810-500G , Ninhydrin Reagent Mb234-25G , Cornmeal Agar (Cma) M-146 (500 Gm) , Hi-Crome Candida Differential Agar M-1297A (100Gm) , Muller Hinton Agar (500 Gm Pack) , Nutrient Agar (500Gm Pack) , Sabouraud Dextrose Agar (Mh-063) -100 Gm Pack , Triple Sugar Iron Agar (500 Grmpack) , Tcbs Agar (100 Grmpack) , Rpmi(1640) Medium (500Gm) , Potato Dextrose Agar (Pda) Sm-096-100 Grm Pack , Dermatophyte Test Medium (Dtm) -100 Gm , Of Media (M-395)-500 Gm , Gelatin (M920-500G) , Lysine Decarboxylase Broth M-376-500G , Nitrate Agar M4395-500G , Esculin Agar M1386-500G , Nitrate Broth M439-500G , Skimmed Milk Media-100Gm , Fluorescence - Denitrification Medium M565-500G , Blood Agar Base M073 -500Gm , Fluconazole 25Mcg (Sd 232)-1 Packet Of 5 Vial (Each Vial Of 100 Disc ) , Amphotericin B 20Mcg -1 Packet Of 5 Vial (Each Vial Of 100 Disc) , Caspofungin 32Mcg Em119-10St-1 Packet Of 5 Vial ( Each Vial Of 100 Disc ) , Clotrimazole Em 141 10St-1 Packet Of 5 Vial (Each Vial Of 100 Disc ) , Cefoxitine Disk (1Micro Gram) 1 Packet Of 5 Vial ( Each Vial Of 100 Disc ) , Actidione (Cycloheximide) Ms5583-1G , Micro Pippet(100-1000 Microliter) , Loop Sterilization Burner , Mannitol Salt Agar Smh118-500Ml , Thioglycolate Medium Base-M1616 500G , Ferric Chloride , Hichrome Chromogenic Coli Form Agar M1991i , Glass Mccartney Bottle With Lid , Andrades Peptone Water500g , Sugar Fermentation Media , Glucose Fermentation Media , Sucrose Fermentation Media , Lactosefermentation Media , –Maltose Fermentation Media , Enzymic Strips , 1 Cefotaxime / Cefotaxime+ Clavulanic Acidem099 , 2 Ceftazidime/ Ceftazidime+ Clavulanic Acid Em098 , Anti Fungal Agent , 1 Amphotericine B , 2 Fluconazole , 3 Ketoconazole , 4 Nystatin , Octa Disk Combi I Combi 7 , Antibiotic Zone Scalepw297 , Candida Agar M1602 , Pipettes , Pipettes 100Ul , Pipettes 1000Ul , Solution Bottle Sterile , Solution Bottle Sterile Tcp 037 , Solution Bottle Sterile Tcp 038 , Solution Bottle Sterile Tcp 040 , Test Tube Racks , Test Tube Large , Test Tube Medium , Test Tube Small , Filter Paper (Whatman No.1) , Cellulose Nitrate Membrane , Forceps , Surgical Blades No.22 , Scissors , S.S. Petri Plate Carrier With Handlela659 , Screw Tubes , Durham’Stube Long , Wash Bottles , Disposable Plastic Flexi Loops , Hand Sanitizer 500 Ml , Liquid Hand Wash 500 Ml , Suction Tube With Tip Vaccum (Vaccu Suck Yankaur) , Dialyser (1.6 M2) , Hd Av Line (Tubing Set) , Part A (Acetic Acid) Solution , Part B (Bicarbonate) Hd , Citric Acid Solution 50% , Autoclavable Bags For Waste Disposable (Medium) , Autoclavable Bags For Waste Disposable (Large) , Tissue Paper Roll , Ph Papers , Marker Pen Wide/Narrow/Tip , La483 , Ceiling Tap For Lab. Ware , Glass/Slide Pencil/Marker , Slide Staining Jar , Coplin Jar , Slide Staining Racks , Cover Slipenglish Glass , Hand Washing Solution , Glass Ware Washing Solution , Environmental Sanitizer & Spray Pump Co014 , Hi Gas Burner , Niddle Cutter , Hi Loop Electric Sterilizerla832 , Colony Counter La660 , India Ink , Urea Solution Fd2535x , Cedar Wood Oil , Paraffin Oil , Antisera , Antiserasalmonella , Antisera Vibrio- , Antisera E.Coli , H2o2 , Gram Negative Broth , Selenite F Broth , Dtm , Sds , Rcm , Hand Gloves , Powder Free Surgical Gloves , Mantoux Test 5 Tu 10Tu , Thayer Martin Medium , Tinsdale Medium , Lj Media , Loffler’Sserum Slop , Dca Agar , Xld Agar , Ss Agar , Of Sugar Media , Tcbs Agar , Ashdown’S Media , Gas Fumigation Sachet , Cetrimide Agar , Congo Red Agar , Tryptic Soya Broth , Bile Aesculin Agar , 2 Ply Absorbent Tissue Roll Lab. Grade , Purple Nitrile Gloves With Beaded Cuffs, Textured Finger Tips With Minimum 6 Mm Thickness , Absorbant Tissue Roll 2 Ply X 50 Mtr , Aluminium Foil 72 Mtr , Sodium Hypochlorite , Iso Propanol Absolute(500 Ml) , Ethanol Absolute (500 Ml) , Racked Filter Tips 1000Ul Compatible With Sartorious Pipette (10 Boxes /Pack 96 Each Box) , Racked Filter Tips 200 Ulcompatible With Sartorious Pipette (10 Boxes /Pack 96 Each Box) , Racked Filter Tips 100 Ulcompatible With Sartorious Pipette (10 Boxes /Pack 96 Each Box) , Racked Filter Tips 10 Ulcompatible With Sartorious Pipette (10 Boxes /Pack 96 Each Box) , Filter Tips 100-1200 Ul (D1200) Proprietory Item For Gilson Multichannel Pipette , Hard Shell 96 Well Plates, Low Profile, Thin Wall, Skirted , White Serial No Hsp9655 Proprietory Item For Biorad Cfx-96 Real Time Pcr , Microseal ‘B’ Pcr Plate Sealing Film Adhesive Optical Serial No Msb1001 Proprietory Itemfor Biorad Cfx-96 Real Time Pcr , Microamp Optical 96-Well Reaction Plate (N8010560) Proprietory Item Quant Studio 5 Applied Biosystem Real Time Pcr , Microamp Optical Adhesive Filmproprietory Item , Elisa Reader Print Rolls 3” , Magmax Viral Isolation Kit With Plastic Consumables Proprietory Item Make Thermofisher (Quant Studio 5) , Kingfisher Duo Prime Deep Well 96 Plateproprietory Item (95040455/A48424/95040450/ A48305) , Kingfisher Duo 12 Tip Comb , Kingfisher Duo Elution Strip , Kingfisher Duo Elution Cap , Total Nucleic Acid Extraction Kit Qiagen Proprietory Item , Stool Dna Extraction Kit , Conical Bottom Eppendorf Tube Dna/ Rna Free(1.5 Ml) , Cryovials Screw Cap Withstand -80 C , Cryotags Withstand -80 C , Falcon Tubes (50 Ml) , Falcon Tubes (15 Ml) , Parafilm Roll , Borosil Screw Cap Bottle 1000 Ml , Borosil Screw Cap Bottle 500 Ml , Borosil Screw Cap Bottle 250 Ml , Borosil Conical Bottom Flask 250 , Borosil Conical Bottom Flask 500 , Measuring Cylinder 100 Ml , Measuring Cylinder 1000 Ml , Plastic Spray Bottles 500 Ml , Laboratory Grade Hand Wash (500 Ml) , Chlorine Based Gas Fumigation Agent For Virology Lab Disinfection , 0.5 Ml Pcr Strip With Caps (8 Strip ) Proprietory For Cfx 96 , Test Tube (Capacity – 20Ml) , Beaker (Capacity – 50Ml) , Beaker (Capacity – 100Ml) , Beaker (Capacity – 250Ml) , Beaker (Capacity – 500Ml) , Beaker (Capacity – 1000Ml) , Test Tube Brush , Sprit Lamp , Glass Pipette (10 Ml) , Urino Meter , Pap Pen For Immuno Histochemistry (Ihc) , Polymer Kit , Hrp +Dab 15 Ml. , Micro Pippets Variable Vol. , Anti Er 3 Ml. Rtu , Anti Pr 3 Ml. Rtu , Immuno Histo Chemistry Wash Buffer 6 X 20 Ml. , Antigen Retrieval Solution , Immuno Histo Chemistry (Ihc) Slide 100 / Pk , Anti Hertu N 3 Ml. Rtu , Heparin Tube , Sodiumcitrate Tube , Biomedical Dustbin Set With 4 Colours , Accu Pipette(Tarson) Cat. No. 030090 , Micropipette Stand , Micropipettetips (05-10 ?L) , Micropipettetips (10-200 ?L) , Micropipettetips (200-1000 ?L) , Micropipettetips (50-100 ?L) , Micropipettetips (05-10 ?L) , Micropipettetips (10-200 ?L) , Micropipettetips (50-100 ?L) , Beaker (10-100 Ml) , Beaker(100-1000 Ml) , Test Tube Rack , 0.25 Micrometer Syringe Filter , Mini Cooler , Oil Emulsion(1X 250 Ml) , Para Film Role , Starlabs Diamond Tip Glass Marking Pencil , Freezer Tapes , Blood Transportation Box , Dialyser (1.8 M2) , Dna Extraction Kit , Rtpcrhpv Genotyping (16,18,45 Multiplex) Probe Pcr Kit , Molecular Grade Ethanol (96-100%) , Propane(Iso Propyl Alcohol) , Coplin Staining Jar , Molecular Biology Grade Water , Liquid Based Cytology , Slide Stand , Measuring Cylinder , 8-Strip Tube & Optically Clear Flat Caps For Pcr ( Thermo Fisher) , Pcr Tubes (0.2Ml) (Thermo Fisher) , 1.2 Ml Pcr Tube , 0.5Ml Pcr Tube , Pcr Cooler , Pcr Plates (Thermo Fisher) , Opticalsealingfilm (Thermo Fisher) , Pcr Tube Stand , Forcep , Pbs 10X , Tris Edta , Lb Agar Media , Naoh Pellet , Chloroform , Ethanol 70 % , Acetone , Methanol , Hplc Water , Weighingbalance (Mg) , Capillaries , Safety Goggles( Formolecular Lab) , Micropipettetips (200- 1000 ?L) , Glass Slide , Coverslip(Large &Small Size) , Surgicalheadcap , Surgical Mask , Surgicalgloves , Lugal’S Iodine (100Ml) , Acetic Acid Glacial(99.5 %) , Nitrile Gloves , Ph Strips ( Ph Meter) , Distilled Water , Rotar (15 Ml-50 Ml) , Forcep 10 , Pipette (Autoclavable) (10?L, 200?L,1000?L) , Vortex Mixer(Brand-Spinix) , Petri Plates (Autoclavable) , Loop , Spirit Lamp , Cotton Bundles , Discarders Glass , Incubator , Autoclavable Bags 50 , Measuringbeaker (All Size) , Test Tube (Glass Ria Vial 5 Ml) , Testing Cup (1.5 Ml) , Diffd5 (Agappe Mispa Count Xplus) , Diffc5 (Agappe Mispa Count Xplus) , Diffl5 (Agappe Mispa Count Xplus) , Diffp5 (Agappe Mispa Count Xplus) , Diluent (Dx3) (Agappe Mispa Count X ) , Lyse (Lx3) (Agappe Mispa Count X ) , Probe Cleaner(Agappe Mispa Count X ) , Electrophoresis Chamber , Etbr(Ethidium Bromide) , Agar Powder (Bacteriological) , Tris Hcl , Petri Plates , Media Agrose, Acrylamide, Cellulose , 4 Mobile Phase- Rinse, , Diluent , Seal Wash , 10%Isopropanol , Optical Adhesive Film -25 Covers , Optical 96 Well Reaction Plate Thermofisher , Carboyl Fushion , Propidium Iodide , Ethydium Bromide , Acridine Orange , Sonicator (Water Bath) , Acetonitrile Ethyl Acetate , Hexane , Butanol , Formic Acid , Monobromobimane (Mbb) Probe , Cystein / Glutathione (Thiol Standerd) , Elisa Kit For Ferritin Assay , No. 41 Whatman Filter Paper , Polypropylene Tube , Elisa Kit For Vegf , 20 Ml Glass Vial With Cap , Tris Hcl Buffer , 100 Ul Proteinase K , 5 Mm Cacl2 , 10 Ml Of A 30 % H2o2 Solution , Pig Pancreatic Enzyme , Porcine Lipase , Glass Flask 100 Ml. , Cotton Gowns , Plastic Free Cgloves , Sample Vials: Polypropylene Or Teflon Vials , Digestion Vessls : Teflon Digestion Vessels For Sample Preparation , Zinc Salt (Eg. Zinc Acetate Or Zinc Chloride) , Trupcr Hpv 16 & 18 Detection , Norgens Human Papillomavirus (Hpv) (High And Low Risk) Taqman Pcr Detection , Nucleic Acid Extraction Kit , Magmax Ffpe Dna / Rna Ultra Kit , Rnase Free Microfuge Tubes (1.5 Ml) , Human Il - 1 Beta Elisa , Human Il - 1 Alpha Elisa , Human Tnf - Alpha Elisa , Human Cox - 2 Elisa , Human Cox - 1 Elisa , Human Papillomavirus (Hpv) (High And Low Risk) Taqman Pcr Detection , Tissue Homogenizer , Hepatits B Quantitative Rt Pcr (Hbv Dna) (96 Rxn) , Hpv Genotyping Rt Pcr Kit (96 Rxn) , Stool Dna Extraction , Total Nucleic Acid Extraction Kit , Gentera Rna Advantage / Rna Later Solution (100 Ml) , Respiratory Virus Panel Rt Pcr , Filter Tips 100-1200 Ul (D1200)Gilson (D1200) , Tbe Buffer Tris Base (500 Gm.) , Boric Acid For Molecular Biology 99.5 % (1 Kg.) , Agarose Powder (500 Gm.) , Edta Disodium Salt Dehydrated(500 Gm) , Orange Blue Loading Dye 6 X (3 Ml.) , 100 Bp Dna Ladder (250 Gm.) , Red Protein Gel Stain (500 Ul) , Micropipette Stand , H1n1 /Inf A/B Rt Pcr
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
Madhya Pradesh View Result →
12.
Defence #11233985 Price Bid
Tender for Taking Down Cement Or Cement Lime Plaster Of Any Description On Brick Or Plain Cement Concrete Blocks Or Stone Wall Or Concrete Surface Etc Including Racking Out Joints, Hacking For Keys, Scrubbing Down With Water Etc All As Specified And Directed. , M&L For Rendering 15 Mm Thick On Fair Faces Of Brick Work In Cm 1:6 Finished Even And Fair Without Using Extra Cement Complete. , M&L For 15Mm Thick Cement Plaster In Cm (1:4) On Fair Faces Of Brick Or Concrete Surfaces Using Wpc Where Ever Required As Per Manufacturerers Instructions And Finishing The Surface Even And Fair Etc. Complete All As Specified Note -Wpc Shall Be Measured And Paid Separetely. , Supply Only Wpc Complete All As Specified And Directed. , M&L For Rendering 5 Mm Thick In Cm (1:3) On Fair Faces Of Brick Work Or Concrete Surfaces On Ceiling Surfaces And Finishing The Surface Even And Smooth Without Using Extra Cement All As Specified And As Directed. , M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Cement Base Paint Over A Coat Of Primer Complete. , M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Complete. , M&L For Preparation Of New Plastered Surfaces Of Ceiling And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Primer Complete. , M&L For Preparation Of Old Plastered Surfaces Of Walls Incl Washing Rubbing Down And Stopping Of Distempered And Painted And Applying One Coat Of Oil Bound Distemper On Old Decorated Surfaces On Walls Incl Filling Of Nail Holes By Cementious Wall Care Putty All As Specified And As Directed. The Contractor Shall Make Necessary Arrangement Of Scaffolding And Ensure Safety Of Labours. , All As Per Item No 9, But Applying Two Coats Of Oil Bound Distemper , M&L For Preparation, Complete Removal Of Old Treated Surfaces Of Ceiling And Applying One Coats Of Distember Oil Emulsion, White Or Tinted, Complete All As Specified And Directed. , M&L For Providing And Applying Minimum 2 Mm Thick Wall Care Putty Over Prepared Surface (Old And New Plastered Surface) And Rubbing It With Sand Paper To Achieve The Surface Even And Smooth For Further Application Of Finishes Complete All As Specified And Directed. (Note : The Rate Quoted By Contractor Shall Include Cleaning Of Surface, Application As Per Instruction And Scaffolding Upto 10 Mtr Height Complete All As Specified And Directed) , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surfaces Of Walls Incl Cornices Etc By Brooming Down Or Steel Wire Brushing Scraping Down Smoke Soot Moulds Moss And Efflorescent Salt And Trading Oil And Greasy Spots And Applying One Coat Of Cement Base Paint Complete All As Specified And Directed.The Contractor Shall Make Necessary Arrangement Of Scaffolding And Ensure Safety Of Labours. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surfaces Of Walls Incl Cornices Etc By Brooming Down Or Steel Wire Brushing Scraping Down Smoke Soot Moulds Moss And Efflorescent Salt And Trading Oil And Greasy Spots And Applying Two Coat Of Cement Base Paint Complete All As Specified And Directed.The Contractor Shall Make Necessary Arrangement Of Scaffolding And Ensure Safety Of Labours. , M&L For Preparation Of Old Or Previously Treated Steel Surfaces Of Any Description,Not Otherwise Descri- Bed Over 10Cm Width Or Girth And Applying One Coats Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of Old Or Previously Treated Wooden Surfaces Of Any Description,Not Otherwise Described Over 10Cm Width Or Girth And Applying One Coats Of Synthetic Enamel Paint Complete All As Specified And Directed.. The Contractor Shall Make Necessary Arrangement Of Scaffolding And Ensure Safety Of Labours. , M&L For Preparation Of Old Or Previously Treated Cemented Surfaces Of Any Description,Not Otherwise Descri- Bed Over 10Cm Width Or Girth And Applying One Coats Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For One Coat Of Exterior Emulsion Paint On Old Treated Surface Of Wall Preparation Of Plastered Surface To Make Surface Truely Smooth Complete All As Specified And As Directed By Engr-In-Charge. The Contractor Shall Make Necessary Arrangement Of Scaffolding And Ensure Safety Of Labours. , M&L For Two Coat Of Exterior Emulsion Paint Over A Priming Coat (As Per Manufactures Instruction) On Old Treated Surface Of Wall After Complete Removal Of Existing Treatment Including Preparation Of Plastered Surface And Provision Of 2Mm Thick Wall Putty In Two Layer To Make Surface Truely Smooth Complete All As Specified And As Directed By Engr-In-Charge. , M&L For Preparation Of Existing Old Treated Cgi/Pgi Sheet Roof Surface Of Any Description Not Otherwise Described Over 10 Cm Width Or Girth By Cleaning , Removing Dust And Incl Washing And Cleaning Etc To Receive Painting And Applying One Coats Of Roof Paints ( Coptic Of Jenson & Nicholsan Or Antisol Of Berger) Complete All As Spd And Directed The Contractor Shall Make Necessary Arrangement Of Scaffolding And Ensure Safety Of Labours. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , M&L Glazed Coloured Ceramic Tiles In Verticle Surfaces 450 X 300 X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match With Backcoat Of Screed Bed Or Bedding Layer 10Mm Thick 1:4 And Pointed In White Or Coloured Cement To Match Complete All As Specified. , M&L Non - Skid Coloured Ceramic Tiles 7 To 10 Mm Thick (Square/Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry Over Screed Bed Of 15 Mm Thick 1:6 And Pointed In White Or Coloured Cement To Match Complete. , Taking Up Or Down 15Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Taking Up Or Down 20Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , S&F For 15Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , S&F For 20 Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Bib Tap Long Body Cp, Screwed For Iron Pipes Complete All As Specified And Directed , S&F In Repair Angle Cock 15 Mm Bore Brass Fancy Type Chromium Plated, Screwed Both Ends For Pipes Or For Unions Fixed In Repairs Including Making Good To Match With Existing Surface , S&F In Repair Pillar Taps 15 Mm Bore, Brass Chromium Plated , Screwed Down High Pressure With Or Without Letter Hot Or Cold With Long Screwed Shanks And Fly Nut Complete All As Specified, Fixed In Repairs. , S&F In Repair Bib Tap Standard Of Ptmt (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath Fitting), Any Colour, Screwed Foriron Pipe 15 Mm Bore Pipe (Minimum Weight 90 Gm) All As Specified, Fixed In Repairs , S&F In Repair Polymer White (Polypropeylene Delrin And Abs) Low Level Flushing Cistern 10 Ltrs Capacity, Valveless, Syphonic Action Type Complete With Inlet, Ball Valve Float Valve, Bends Brackets, Rawl Plug, Brass Screws Handle Etc Complete, Complete All As Specified And Directed. , S&F In Repairs, 550X400mm Vitreous China, Wash Hand Basin , Flat Back Excluding Trap And Waste Chain And Plug And Porcelain Stopper Including Sutaible Size Brackets Waste Pipe And Waste Coupling Complete All As Specified And Directed. , S&F In Repair Hot And Cold Single Hole Basin Mixer Brass Chromium Plated 15Mm Bore Fixed As In Repairs Complete All As Specified And Directed. , S&F In Repair Brass Cp Wall Mixer For Mixing Hot & Cold Water (3 In 1) Screwed Down For Iron Pipe And Fixed Bore Of Pipe 15Mm Complete All As Specified . , S&F 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed , Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden/Metal Frames, Glazed With Putty Or Fixed With Beads Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones All As Specified , S&F 3 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square Not Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed. , S&F In Repairs Of Stainless Steel Wire Cloth. 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Wire Staples Complete All As Specified And Directed. , S&F In Repair One Piece Floor Mounted Vitreous China Ewc With Integrated Flushing Cistern, Soft Closing Seat Cover And Necessary Nut/Bolt For Fixing Complete All As Specified And As Directed By Engr-In-Charge , S&F In Repair Tubular Towel Rail Cp Brass, Chromium Plated D Type With Cp Brackets, 600 Mm Long Between Flanges All As Specified. , S&F In Repair Soap Dish Cp Complete All As Specified And Directed , S&F Pvc Whb Waste Pipe 32/40 Mm Dia Compolete All As Specified , S&F In Repair Hand Shower (Health Faucet) Cp Brass 15 Mm Bore With 1 Meter Long Easy Flex Tube In Chrome Finish And Wall Hook With Nrv (Back Flow Preventer) As Approved By The Ge. , S&F In Repairs Chromium Plated Shower Rose 125 Mm Swivel Type , S & F In Repair 25Mm Dia Aluminium Alloy Anodised Curtain Rod Decorative Fancy Type With Brackets Complete All As Specified. , S & F In Repair Pvc Connections 15Mm Dia , 600Mm Long, With Ptmt Nuts & Washers At Both Ends , S&F In Repair Glass Shelf 450 X 125 X 6Mm (With Abs Bracket Chromium Plated Bracket Guard And Ss Railing Complete All As Specified And As Directed , Dismantling Of Brick Tiles Or Terracing Tiles, Single Layer On Roofs Complete All As Specified. , M&L 50Mm Thick (Laid In Two Equal Layer Of 25 Mm Thick) In Plain Cement Concrete 1:2:4 Type B-0 (Using 12.5Mm Graded Crushed Stone Aggregate) Including Finishing Even And Fair As In Roof Padding And Prepare Surface To Receive Treatment Complete All As Specified And Directed. , S & F 1.4Mm Dia Galvanised Steel Wire Netting 20Mm X 20Mm Mesh Size , Made Up Into Matteresses Or Cages, Lapped , Wired And Laid In Position ,Incl Fixed With Tinned Tacks Of Wire Staples Complete All As Specified. , M&L 40 Mm Thick Brick Tiles Laid Over And Including 15Mm Thick Bedding Layer In Cement Mortar 1:6 And Jointed, Grouted And Pointed Flush In Cm 1:3 Mixed With Stp No-1 Liguid @ 200Ml Of Per 50 Kg Of Cement Complete All As Specified. , M&L For App Based Polymeric Membrane Minimum Weighing 3.00Kg/Sqm And Minimum 3Mm Thick Reinforced With Polyster Non Woven Fabric ( Wt Not Less Than 150 Gms /Sqm ) Laid On Bituminous Surfaces By Forced Application Over Entire Roof Area, With Side Lap Not Less 100Mm And End Lap Not Less Than 150Mm Complete All Specified. , M&L For Applying A Tack Coat Of Industrial Bitumen 85/25 Grade @ 1.2 Kg/Sqm Over A Coat Of Bitumen Primer @ 0.30 Kg/ Sqm Including Cleaning Surfaces Etc Complete All As Specified , S&F In Repair Rotational Moulded Polythene Water Storage Tanks Tripple Layer (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 500 Ltrs Capacity With And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Complete All As Specified And Directed. , S&F In Repair Rotational Moulded Polythene Water Storage Tanks Tripple Layer (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 1000 Ltrs Capacity With And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Complete All As Specified And Directed. , S&F In Repair 110 Mm Bore Pvc Rain Water Drain, Waste And Vent Pipes Single Socketed Ncluding Necessary Fittings Like Socket, Bend, Elbow, Single/Double Tee Etc In Any Length With Rubber Ring Joints Fixed With Clamps Of Flat Iron And Including Bolts And Nuts And Securing Ends Of Stays To Wall Or Roof And Making Good With Cement Mortor 1:3 Or With Plain Cement Concrete 1:2:4 Complete All As Directed. , Demolition Of Brick Work Built In Cement Mortar All As Specified , M&L For Brick Work With Sub Class B Bricks, Straight On Plan Exc 6M Mean Radius Built In Cm 1:6 Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Uttarakhand View Result →
13.
Defence #11219952 AOC
Tender For (Schedule-A Part-I B/R Works) Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Not Exc 1.50 Sqm Each And Removing From Site Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc 1.50 Sqm Eachand N Exc 4 Sqm And Removing From Site Complete All As Specified And Directed. , Taking Down Shutter Of Any Description Area Exc. 1 Sqm And N.Exc. 2 Sqm And Removing From Site Complete All As Specified And Directed. , Demolition Of Brick Work Built In Cement Mortar Including All Quions, Arches, Pillars Etc But Excluding Ashlar Facings Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Complete All As Specified And Directed. , Demolition Of Cement Concrete (Reinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Reinforcement Cut As Required To Facilitate Demoltion Complete All As Specified And Directed. , Taking Down Cement Plaster On Brick Or Stone Wall Etc Including Racking Out Joints, Hacking For Key Scrubbing Down With Water Etc To Receive New Plaster Etc. Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 125 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc. Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 105 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc Complete All As Specified And Directed. , S & F For 35 Mm Thick Factory Made, 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebeated And Prepared To Received Glass, Gauzed, With Out Sash Bar Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitered Beads For Securing Glass Etc, Size Of Member Of Shutter As Per Specified In Ssr Part-I Section 8, Clause 8.24 (A) And For Door And Fixed With Chowkats, Chemically Pressure Treated Complete All As Specified And As Directed. , S&F For 35Mm Thick 2Nd Class Hard Wood Plain, Framed Pannelled Shutters (Two Panel) With Lock Rail And Panel Of 9Mm Bwp Commercial Ply Or 12Mm Veneered Particle Board Wiyh Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per (Is : 1003 Part-I , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And As Directed. , S&F Box Type Steel Window Side Hung Double Shutters With Provision For Desert Cooler/Ac(Inside For Wire Mesh & Out Side For Glass), Including Guard Bar,Hinges, Steel Handle, Tower Bolt And Steel Peg Stay Complete With Glazing Bar Dovetailed Or Welded And Fixed, Steel Window Shall Be Conforming To Relevant Is Complete All As Shown On Drawing No Ceuz/Td/1302/09, Sh 1/3 To 3/3 And Directed. Complete All As Specified And Directed. Note:- Wire Mesh And Sheet Glass Shall Be Measured And Paid Separately , S&F Steel Ventilators Top Hung Double Shutters (Inside For Wire Mesh & Out Side For Glass), Including Hinges, Steel Handle, Tower Bolt And Steel Peg Stay Complete With Glazing Bar Dovetailed Or Welded Including A Coat Of Red Oxide After Preparation Of Surface Before Fixing.Steel Window Shall Be Conforming To Relevant Is All As Specified. Note:- Wire Mesh And Sheet Glass Shall Be Measured And Paid Separately , S&F For Sheet Glass Palin/Coloured (As Per Directed By Engr-In-Charge) 3Mm / 5 Mm Thick Best Quality And Glazing With Rubber Packing, Screws Or Glass Putty In Squares Exc 0.5 Sqm Each Pane Complete All As Specified And Directed. , S & F For Stainless Steel Wire Cloth Of 0.36Mm Dia Wire And Average Width Of Aperture 1.40Mm & Fixed With Tacks Or Screws, Wire Staples, Etc Complete All As Specified And Directed. , S&F Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Wooden Grain Printed Pvc Sheet & Edges Will Be Painted To Match With Printed Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawingreinforced Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Wood Grain Printed Pvc Sheet 5Mm Thick X15Mm Wide Pvc Sheet Beading Used Inside Stiles And Rails And Decorative Pvc Beading Of 10Mm X 10Mm (900 ) Used Instead Of Exposed Portion Of Pvc Sheet Beading Pvc ‘C Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail. Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Complete All As Specified And Directed. , S&F 100 Mm Long Mild Steel Butt Hinges, Cold Rolled, Medium Weight Complete All As Specified And Directed. , S&F For 125Mm Long Anodised Aluminium Barrel Tower Bolt Of Extruded Section Complete All As Specified And Directed. , S&F 150Mm Long Anodised Aluminium Handles, Cast Type Complete All As Specified And Directed. , S & F In 300Mm Long Aluminium Alloy, Anodized Sliding Door Bolt With Hasp Stapple ( Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy And Fixed Complete All As Specified And Directed. , S&F For 20 To 25 Mm Dia Stainless Steel Drapery Curtain Rod With Brass /Nickel Chrom Polish / Designer Lattos And Brackets Complete All As Specified And Approved By Engr-In-Charge Including Taking Out Old Pelmet With Curtain Rods Complete All As Specified And Directed. , S&F 300 Mm Long Mild Steel Ordinary Rat Tail Rod Pattern Spring Including Roller And Roller Plate Complete All As Specified And Directed. , S& F Floor Door Stopper Of Aluminium Alloy Body And Tongue ,Anodised ,With Hard Drawn Steel Spring ,Fixed In Floor Overall Length Of Cover Plate 140Mm Complete All As Specified And Directed. , S & F 2 Nd Class Hardwood For Plain, Solid, Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue Pinned At Joints, Complete All As Specified And As Directed. , S & F For Pvc And Cupboard Shelf/ Partition/ Frame / Shutter Of 18Mm Thick Side Of Panel Externally Impact Perfact Finish To The Shutter And Joined Together With Solvent Cement Adhesive 8Mm Thick (4Mmx2)X12Mm Wide Pvc Sheet Is Used As Gap Insert For Top & Bottom Rail, 18Mm X 1Mm Pvc Edge Lipping Is Done On Top & Bottom Side Using Pvc Solvent Cement Adhesive, Incl Hasp And Stable For Locking Purpose, Etc Complete As Per Direction Of Engr-In-Charge, Manufactures Specification And Drawing. , M&L For Block Boards 18/19 Mm Thick, Grade 2 Quality, I N T E R I O R Grade, Decorative Type With Decorative Face Veneer On One Face, Fixed With Screws To Timber Frame-Work For Partision Of Cupboard Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc. 6M Mean Radius Built In Cement Mortor 1:6., Etc Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick In Cm 1:4 On Other Than Fair Faces Of Brick Or Concrete Surface With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed.(Note:- Liquid Water Proofing Compound To Be Measured Paid Separately) , M&L For Rendering 5Mm Thick In Ceiling Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , Supply Only Liquid Water Proofing Compound Complete All As Spesified And Directed. , M&L Plain Cement Concrete 1:4:8, Type D2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor/ Interlocking Paver Block Complete All As Specified And Directed . , M & L 25Mm Thick Cement Concrete Type B-0, 1:2:4 (Using 12.5 Mm Graded Aggregate) For Levelling Course In Floors Complete All As Specified And Directed. , M & L For Non Skid Joint Free Coloured Ceramic Floor Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exc 0.11 Sqm But N Exc 0.18 Sqm,In Floor Etc Set & Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With 15Mm Thick Screed Bed Or Bedding Layer In Cm (1:6) Complete All As Specified And Directed. , All As Per Item No 35 Above But As In Skirting/ Dado Etc With And Including 10Mm Thik Backing Coat In Cement Mortar 1:4 An Wall Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Wall Tiles (Textured And Design As Required) In Vertical Surface 450X300X7Mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Rendering In 1:4 Cm Complete All As Specified And Directed. , M & L For Applying Two Coat Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. , M & L For Applying Two Coat Of Synthetic Enamel Paint On Old Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. , M & L For Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Cement Primer And Over A Coat Of Putty Complete All As Specified And Directed. , Material And Labour For Apply Two Coats Of 100% Premium Anti Fungal Weather Coat Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistence As Per Is 15489;2004, Alkali & Fungal Resistence, Dirt Resistence Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.9 Litre / 10 Sqm Over New Surfaces Complete All As Specified And Directed. . Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Clain On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M & L For Preparing New Plastered Surface On Ceiling And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M&L For Complete Removal Of Exsting Treatment On Plastered Or Unplastered Surface Including Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Applying Two Coat Of Oil Bound Distemper On Walls Over A Coat Of Putty Complete All As Specified And Directed. , Material And Labour For Complete Removal Of Existing Treatment And Apply Two Coats Of 100% Premium Anti Fungal Weather Coat Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistence As Per Is 15489;2004, Alkali & Fungal Resistence, Dirt Resistence Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.9 Litre / 10 Sqm On Old Surfaces Complete All As Specified And Directed. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Clain On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M&L For Three Coat Of White Wash On Old Surface On Wall Including Preparation Of Old Surface Complete All As Specified And Directed. , M&L For Three Coat Of White Wash On Old Surface On Ceiling Including Preparation Of Surface Complete All As Specified And Directed. , Dismantling Of Kota Stone Slabs And Tiles Of Any Description Or Thickness In Laid Bedded And Pointed Floors, Aprons Etc Incl Screed Bed Complete All As Specified And Directed.. , M&L For Machine Cut Kota Stone Slab Flooring 18-20 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Completeand Including 20 Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And As Directed. , M&L For Kota Stone Slab 18-20 Mm Thickin Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed And Jointedwith Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Completeand Including 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And As Directed. , M&L For Rubbing And Washing Of Kota Stone Floor And Mirror Polishing On Kota Stone/ Stone Work Where Ever Required To Give High Gloss Finish Complete All As Specified And Directed. , M & L 20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite With Providing 15Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And As Directed.. , M&L Plain Cement Concrete 1:3:6, Type B1( Using 20Mm Graded Stone Aggregate) 75Mm Thick As In Plinth Protection Complete All As Specified And Directed . , Demolition Of Cement Or Lime Concrete In Any Despription Along With Tarfelt Treatment In Sunken Portion / Roof And Cement Mortar Bedding From Roof Removal Rubbish Out Side Md Land Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:2:4 Type B-0 Using 12.5Mm Graded Crushed Stone Aggregate As In Sunken Portion, Subbase, Etc Complete All As Specified And As Directed. , M&L For Water Proofing Treatment To Sunken Portition / Roof Etc. In Following Sequence:- (I) Properly Cleaning And Drying The Surface (Ii) Applying A Coat Of Bitumen Primer @ 1.2Kg/Sqm And Primer Shall Be Allowed To Dry Over Night. (Iii) Laying App Based Modified Water Proofing Membrane Of Weight Not Less Than 3Kg Per Sqm And Thickness Not Less Than 3 Mm, With 100Mm Overlaps, Sealed And Bonded To The Surface By Torchon Method (Iv) Applying Two Coat Of Bituminous Based Aluminum Painting @ 0.15 Kg/Sqm Each Coat On Water Proofing Treatment With Preparation Of Surfaces Complete All As Specified And Directed At Site. , S&F Vitreous China Squatting Pan Orissa Pattern Of Size 580X440Mm White With Integral Foot Rest (Excluding Flushing Cistern And Flush Pipes) Including Connection To Trap And To Flush Pipe Etc And Lime Concrete Bedding Including P Or S Trap Complete All As Specified And Directed. , M & L For Complete Removal Of Existing Sunken Treatment And Clean The Surface Of Sunken Slab , Appling Plain Cement Concrete B1 1:2:4 (20 Mm Aggregate Of ) With Wpc Of Thickness 100 Mm Finished Even And Fair With 1:20 Sloped Towards Corner Of Outer Wall & Pvc Pipe Of Require Dia Be Inserted At Corner Projecting Outside 20 Cm From Wall And 15 Mm Plaster Cm 1:3 With Wpc Is Also Applied Over Plain Cement Concrete And Returning Filling The Sunken Slab Complete All As Specified And Directed , M&L In Repairs Pvc Valve Less,Syphonic Action Type Flushing Cistern,Low Level ,White With Inlet Ball Valve,Float And Handle Including Brackets And Connection To Pipe And Fixing Of Chain And Pull Or Lever If Any Complete All As Specified And Directed. , Supply And Fixing Of Soap-Dish Chromium Plated Complete All As Specified And As Directed. , S&F In Repairs Of Brass Cp Tubular Towel Rail 20 Mm Dia 60Cm Long Between Flange With Brackets Etc As In Repair Complete All As Specified And Directed. , S&F Vitreous China Wash And Basin, White, Flat Back, Size 550 Mm X 400 Mm Incl Fixed On New Ms Bracket, Fixing Of Tap, Waste Coupling,Fitting,Waste Pipe And Union Incl 15 Mm Bore Brass Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe And Fixed Complete All As Specified And Directed. , S & F Pvc (Swr) Nani Trap / Floor Trap Plain Or Multi With Stainless Steel Grating Incl Joining To Waste Pipe With Solvent Cement Joint Dia Of Outlet 75Mm Bore Complete All As Specified And As Directed. , S&F In Repair 110Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S&F In Repair 75Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S & F In Repair 110 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repair 75 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repairs 110Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Tren1Ches Complete All As Specified And As Directed. , S & F In Repairs 75Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , M & L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Not Exc 10Cm Girth Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Dia Old Serviceable / Unserviceable Steel Tubing Any Grade And Connections Cleaning For Re-Fixing Or Removal To Store Complete All As Specified And Directed . , All As Per Item No 70 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F Steel Tubing Medium Grade ,Galvanized With All Fitting Such As Bend ,Elbow, Socket,Tees,And Fixed Complete To Wall Or In Ceiling Or In Floors Including Cutting Threading And Making Forged Bends On Pipes Ms Hooks Etc ,For 15Mm Bore Pipes Complete All As Specified And As Directed. , All As Per Item No 72 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F In Repair For 15Mm Bore Bib Taps Chromium Plated With Crutch Or Butterfly Handle ,Screwed Down , Screwed For Iron Pipes Or Brass Ferrule Complete All As Specified And Directed. , S&F In Repair Cp Angle Stop Cock Of 15Mm Bore Screwed Down For High Pressure With Crutch Or Butter Fly Handle ,Screwed Both End For Iron Pipes Complete All As Specified And Directed.. , S&F In Repair Cp Wall Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe 15Mm Bore Complete All As Specified And As Directed. , S&Fixed In Repair 125 Mm Size Chromium Plated Shower Rose With Siwel Joint Suitable For 15 Mm Bore Gi Pipes Complete All As Specified And As Directed. , S&F In Repairs Pvc Connection 15Mm Size With Ptmt Nuts Of Length 450 Mm Long Complete All As Specified And As Directed. , S& F In Repair Rotational Moulded Polyethylene Water Storage Tank 500 Liters Capacity (Cylidrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Incl Brass Float Valve 20Mm Dia And Dismantling Water Tank. , S & F In Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats (Minimum Weight 300 Grams) Complete All As Specified And As Directed. , S&F In Trepair Kitchen Sink With Drainage Board Made Of Stainless Steel 1.0 Mm Thick In Kitchen With Plug , Washer And Waste Including Bedding Layer In Cm (1:6) In Wall Or Including Fixing Cantilever Bracket And Connecting Union To Pipes Over All Size 915X460 Mm Bowl Size 410X330X160 Mm Including Taking Out Unserviceable Kitchen Sink Complete All As Specified And As Directed. , M&L For Stain Less Steel Plate Rack For Kitchen 1 Mm Thick Of Best Quality With Suitable Hanging Arrangement And Fixed To Wall Complete All As Specified And Directed .Note:- Size Of Plate Rack Should Not Be Less Than 900X1200 Mm And Weight Of Rack Shall Not Be Less Than 8.5 Kg Each Complete All As Specified And As Directed. , S&F In Repair Gun-Metal, Globe Or Gate Valves, 20 Mm Dia Bore Pipes With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And As Directed. , M & L High Strength Steel Deformed Tmt Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping Columns,Hookings Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.90 Mm Dia Or Securing With Clips, Etc Complete All As Specified And Directed. , M & L For Formwork Fair And Finished Surfaces To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Bands, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Complete All As Specified And Directed , M&L Reinforced Cement Concrete B1 1:2:4 Using 20 Mm Graded Stone Aggr As Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Etc Complete All As Specified And Directed , M & L For Formwork Flat Fair Finished Surfaces To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Bands, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Complete All As Specified And Directed , M&L Reinforced Cement Concrete M-25 Using 20 Mm Graded Stone Aggr As In Beams, Bands, Cantilvers, Bressummers, Linters, Chajjas, Etc Over 1.5M Span Etc Complete All As Specified And Directed , M&L For Mild Steel Bars (Tmt Bars) 5Mm Dia And Over Upto And Including 10Mm Dia In Strriups,Spacers And Binders Complete All As Specified And Directed. , M & L For Precast Cement Concrete 1:2:4 Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Manhole/Drain Slab Cover All As Specified And Set In Cm 1:4 Complete All As Specified And Directed. , Excavation In Trenches N.Exc 1.5M Wide And N.Exc 1.5M In Depth For Foundation Or Etc, For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc N.Exc 10 Sqm On Plan And N.Exc 1.5M In Depth And Getting Out In Hard Dence Soil, Complete All As Specified And Directed. , Returing, Filling In Trenches, Incl Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Hard/Dense Soil Complete All As Specified And Directed. , Removing Excavated Material (Soil) To A Distance Not. Exc. 50 Mtr And Depositing Where Directed At A Level Nexc 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. , Demolition And Breaking Up 150Mm Dia Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete ) And Set In Cement Mortar Complete All As Specified And Directed. , M&L For Concrete Bed To Drain Pipes Including Packing Under, And Haunching Against The Sides Of 150 Mm Bore Pipes In Cement Concrete 1:3:6 Type C-2 ( Using 40 Mm Graded Stone Aggregate) After They Are Laid And Tested Complete All As Specified And Directed. , M&L For 150 Mm Bore Salt Glazed Stone Were (Sgsw) Drain Pipe Grade A Laid To Slope In Tranches And Jointed In Cement Mortar (1:1) Including Necessary Testing For Ensuring Teak Proofing Complete All As Specified And Directed. , M & L For Cutting Into Existing Manhole For Connecting New Drains And Making Good To Pipes And Rendering Cutting Out Existing Benching For And Forming Branching For And Forming Branch Channel (1/2 Round Or ¼ Section ) In Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate Smooth Finished And Reforming Benching As Specified And Directed For 150Mm Dia Of Pipe Complete All As Specified. , M&L For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block (Glossy Finish) Of M-35 Gde Of Approved Shape, Size And Colour Conferming To Is 15658-2006 And Laid Over And Including 25Mm Thick Grid/Sand Cushion Complete All As Specified And Directed. , S & F For Precast Cement Concrete Type B-1 (1:2:4) (20 Mm Graded Stone Aggregate) As In Kerb And Edging To Road And Footpath Etc, Including Chamfered, Weathering, Throating, Etc Setting In Cm(1:4) Complete All As Specified And Directed. , S & F In Repairs Ms Framed Work As In Doors Or Gates Of Angle Iron, Door Frame Or Other Section With Gusset Plate, Rails, Braces And Stair Case Etc Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering Etc, To Prepared For Hanging Or Sliding With Including Either Hooks And Hinges Also Fastening Grills, Grating, Hold Fast Of Doors And Windows Chowkat Etc, With Ends Of Bars Shouldered And Or Riveted, Or Forget Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework Of Water Tanksand Fixing And Similar Work Confirming To Fe 290 Gde E-165 Complete All As Specified And As Directed. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing), And Rubbish Off The Premises Complete All As Specified And Directed. , M&L For Cement Concrete B1 1:2:4 (20Mm Aggregate) In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. , M & L Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate) As In Coping, Bearing Course, Manhole/ Drain Channels Etc In Including Necessary Formwork Complete All As Specified And Directed. , M&L For Preparation Of New Steel Surfaces Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , S&F 600Mmx450Mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers, Complete All As Specified And Directed. , M&L For Preparation Of Old Steel Surfaces Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M Works) Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And As Directed. , (Schedule-A Part-Ii E/M Works) Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And As Directed.
Contract Date: Jun 15, 2026 Contract Value : 31.73 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu and Kashmir View Result →
14.
Power #11209663 AOC
Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 3995405; 3995405; Service Provider-Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.External Work. 15 Mm Dia. Nominal Bore Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.External Work20 Mm Dia. Nominal Bore Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.External Work 25 Mm Dia. Nominal Bore Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.External Work 32 Mm Dia. Nominal Bore Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.External Work 40 Mm Dia. Nominal Bore Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc.External Work 50 Mm Dia. Nominal Bore Same As Above But For Internal Work (Exposed On Wall) 15 Mm Dia. Nominal Bore Same As Above But For Internal Work (Exposed On Wall) 20 Mm Dia. Nominal Bore Same As Above But For Internal Work (Exposed On Wall) 25 Mm Dia. Nominal Bore Same As Above But For Internal Work (Exposed On Wall) 32 Mm Dia. Nominal Bore Same As Above But For Internal Work (Exposed On Wall) 40 Mm Dia. Nominal Bore Same As Above But For Internal Work (Exposed On Wall) 50 Mm Dia. Nominal Bore Providing & Fixing Full Way Stop Cock/G.M. Gate Valve Of Following Dia With Wheel, I.S.I. Mark Heavy Duty. Including Supply Of All Materials Labours, T&P Required For Proper Completion. 15 Mm Dia. Nominal Bore Providing & Fixing Full Way Stop Cock/G.M. Gate Valve Of Following Dia With Wheel, I.S.I. Mark Heavy Duty. Including Supply Of All Materials Labours, T&P Required For Proper Completion. 20 Mm Dia. Nominal Bore Providing & Fixing Full Way Stop Cock/G.M. Gate Valve Of Following Dia With Wheel, I.S.I. Mark Heavy Duty. Including Supply Of All Materials Labours, T&P Required For Proper Completion. 25 Mm Dia. Nominal Bore Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete :15 Mm Nominal Bore Providing And Fixing Brass Ferrule With C.I. Mouth Cover Including Boring And Tapping The Main :15 Mm Nominal Bore Providing And Fixing Unplasticised P.V.C. Connection Pipe With Ptmt Nuts, Collar And Bush Of Approved Quality And Colour. 15 Mm Nominal Bore With 45 Cm Length. Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank Providing And Fixing Brass Bib Cock Of Approved Quality :15 Mm Nominal Bore Supply And Fixing Of 15Mm Dia Ci/P.V.C. Bib Cock Including Replacing Of Old Bib Cock Complete. Providing & Fixing Of 110 Mm P.V.C. Pipe 6 Kg/Cm2 Specials Such As Tee, Bend, Socket, Elbow Etc. Including Cutting Excavation Of Trenches Its Back Filling After Testing The Pipe Line, Watering, Ramming Etc. Complete Including Disposal Of Surplus Earth From The Site Up To 100 Metre As Per Direction Of Engineer-In-Charge As Required For Proper Completion Of Work. Providing & Fixing 15 Mm Dia C.P. Pillar Cock Of Approved Make Including Cost Of All Materials, Labours T&P Etc. Required For Proper Completion Of Work. Providing & Fixing Suitable P.V.C. Washer In Bib/Stop/Pillar Cock, Including Cost Of Washer, Labour T&P Etc. Providing And Fixing G.I. Union 15 Mm Nominal Bore Each Union In Existing G.I. Pipe Line, Cutting And Threading The Pipe And Making Long Screws Including Excavation, Refilling The Earth Or Cutting Of Wall And Making Good The Same Complete Wherever Required :15 Mm Nominal Bore. Same As Above But For G.I. Tee, Socket, Elbow, Bend Etc. Upto 50Mm Dia Providing And Fixing White Vitreous China Water Closet Squatting Pan (Indian Type) But Orissa Pattern W.C. Pan Of Size 580X440 Mm Providing And Fixing White Vitreous China Squatting Plate Urinal With Integral Rim Longitudinal Flush Pipe. Providing And Fixing White Vitreous China Wash Basin Including Making All Connections But Excluding The Cost Of Fittings :Flat Back Wash Basin Of Size 550X400Mm. Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour.Waste Coupling 38 Mm Dia Of 83 Mm Length And 77Mm Breadth, Weighing Not Less Than 60Gms. Providing And Fixing P.V.C. Low Level Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete.10 Litre Capacity - White Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. Providing & Fixing :100 Mm Sand Cast Iron Grating For Gully Trap. Repair Of Leakage In G.I./C.I. Pipe Line Of Following Dia. Including Necessary Excavation/Dismantling Relaying Of Pipe And Refilling Of Trenches Etc. Including Replacement Of Nuts, Bolts, Washer And Filling Etc. Complete 20 Mm To 40 Mm Dia Pipe Repair Of Leakage In G.I./C.I. Pipe Line Of Following Dia. Including Necessary Excavation/Dismantling Relaying Of Pipe And Refilling Of Trenches Etc. Including Replacement Of Nuts, Bolts, Washer And Filling Etc. Complete 50 Mm To125 Mm Dia Pipe Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. 2.6.1 All Kinds Of Soil Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level .1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size). Same As Above But C.C.1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Providing Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) In Superstructure For Closing Cavity 5 To 7.5 Cm Wide In Cavity Wall Complete With 10 Cm / 11.4 Cm Wide Bitumen Felt Type 3 Grade 1. Brick Work With Non Modular Fly Ash Lime Bricks (Falg Bricks) Conforming To Is:12894, Class Designation 10 Average Compressive Strength In Super Structure Above Plinth Level Up To Floor V Level In :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 12 Mm Cement Plaster In Fine Sand Of Mix With 1:6 (1 Cement: 6 Fine Sand) Cement Concrete Flooring 1:2:4. With 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate. Attending Of Petty Maintenance Service Like Plumbing, Welder, Mason And Carpenter Services With One No. Plumber/Welder/Mason/Carpenter With One No. Helper Per Hour. Making Connection Of G.I. Distribution Branch With G.I. Main Of Following Sizes By Providing And Fixing Tee, Including Cutting And Threading The Pipe Etc. Complete :25 To 40 Mm Nominal Bore.Providing And Fixing Brass Ferrule With C.I. Mouth Cover Including Boring And Tapping The Main.15 Mm Nominal Bore Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Is:8931.15 Mm Nominal Bore. Providing & Fixing Bottle Trap Of C.P. Brass Including Cost Of All Materials, Labour, T&P Etc. All Complete. Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required .White Glazed Fire Clay Kitchen Sink Of Size 600X450X250 Mm. Providing And Fixing Soil, Waste And Vent Pipes Of 100 Mm Dia. Centrifugally Cast (Spun) Iron Socket & Spigot (S&S) Pipe As Per Is: 3989. Same As Item Above Above But For 75 Mm Dia. Centrifugally Cast (Spun) Iron Socketed Supply & Fixing C.P. Brass Bib Cock Heavy Quality 15 Mm Dia (400 Gms) Isi Mark Including Supply Of All Material, Labour And T&P Etc. Required For Proper Completion Of Work. Providing And Fixing Bend Of Required Degree With Access Door, Insertion Rubber Washer 3 Mm Thick, Bolts And Nuts Complete Of 100 Mm Dia. With Sand Cast Iron S&S As Per Is 3989 Same As Item Above Above But For 75 Mm Dia And .Sand Cast Iron S&S As Per Is- 3989 Providing Lead Caulked Joints To Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes And Fittings Of Diameter Of 100 Mm. Same As Item Above Above But For 75 Mm Dia. Same As Item Above Above But For 50 Mm Dia. Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors .100 Mm Inlet And 100 Mm Outlet.Sand Cast Iron S&S As Per Is: 1729. Cleaning Of Septic Tank Including Disposal Of Waste Outside The Area As Per Direction Of The Engineer Incharge Including Cost Of Removing Septic Tank Cover And Replacing Cover In Its Position Including Cost Of All Labour T&P Etc. Required For Proper Completion Of Work. Same As Above Item But For Inspection Chamber. Repair & Adustment Of Aluminum Doors And Windows For Proper Functioning By Skilled Mechanic Including All Labour T&P Etc. Required For Proper Completion Work. Supply & Fixing Of Brass Polised Hydraulic Door Closure Of Standar Size And Approved Quality In Door Shutter Including Cost Of All Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg., For Doors, Including Cost Of Cutting Floors , Embedding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer-In-Charge.With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness. Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty:Float Glass Panes Of Thickness 5.5 Mm Same As Item Above But 4 Mm Thich Float Glass Panes. Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Completeupto 5Mm Depth And 5 Mm Width. Providing & Fixing Fully Glazed Anodized Aluminum Fixed Glazing With Hindalco Or Equivalent Extruded Standard Sections Of Various Thickness Show In Extruded Standard Sections Of Various Thickness Shown In Drawing Joints Mitered And Jointed As Shown In Drawing Including Providing And Fixed Of 5.5 Mm Thick Glass With Neoprene Beading All Round. The Minimum Thickness Of Anodizing On All Aluminum Sections Should Be 20 Micron With A (+) 2 Microns Tolerance. The Rate Should Include The Cost Of Fixing Of All Frame To Teak Wood Frame Or With Masonry/Rb/Rcc Structure By There Of Starting From 100 Mm Above The Bottom In Vertical Member Excluding Cost Of Teak Wood Frame. But Including Cost Of All Other Materials, Labour T&P Etc. Complete Required For Proper Completion Of Work. Same As Item Above But For Openable Window Portion As Shown In Drawings, Including Providing & Fixing Aluminum Hinges Of Heavy Quality And All Other Fitting Like Concealed Tower Bolts Handles Etc. As Per Direction Of Engineer-In-Charge Required For Proper Completion Of Work. Same As Item Above But For Openable Gate/Doors Portion As Shown In Drawings Including Providing And Fixing Pivots Of Heavy Quality And All Other Fittings Like Concealed Approved Tower Bolts, Bush Plate (As Shown In Drawing) And Approved Standard Brass Body With Brass Components 6 Levers Heavy Duly Concealed Lock Etc. Required For Proper Completion Of Work. Providing & Fixing Top Cover Of Rolling Shutters Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown Laid On 20Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigments Etc Complete. Providing Corrugated G.S. Sheet Roofing Including Vertical/Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/ Vertical Or Curved Surfaces) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required.1.00Mm Thick With Zinc Coating Not Less Than 275Gm/M². Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J. Or L Hooks, Bolts And Nuts 8 Mm Dia. G.I. Limpet And Bitumen Washers Complete. 0.80Mm Thick With Zinc Coating Not Less Than 275Gm/M². Providing Non-Asbestos High Impact Polypropylene Reinforced Cement 6Mm Thick Corrugated Sheets (As Per Is: 14871) Roofing Up To Any Pitch And Fixing With Polymer Coated J, Or L Hooks, Bolts And Nuts 8Mm Dia. G.I. Plain And Bitumen Washers Or With Self Drilling Fastener And Epdm Washers Etc. Complete (Excluding The Cost Of Purlins, Rafters And Trusses), Including Cutting Sheets To Size And Shape Wherever Required. Providing Jack Hammer With Compressor Its Lead And Operator For Making Hole In Slab And Breaking R.C.C. And Exposing Existing Reinforcement And J.C.B Machine With Driver/Operator Fuel Hire Etc. Complete. Providing And Fixing 3Mm Thick Translucent White Acrylic Plastic Sheets Of Approved Quality In False Ceiling Or Window Pan Up To Any Elevation. Providing And Fixing 6 Mm. Thick Gympsum Board In False Ceiling With Beading And All Including Fixture Where Ever As Required Including Supply All Materials, Labours, T&P Etc. Required For Proper Completion Of Work. Reinforcement For R.C.C Work Including Straightening, Cutting Bending, Placing In Position And Binding All Complete (Cold Twisted Bars). Providing And Grouting With Convextra G.P.- 2 Of Standard Quality Approved By Engineer In - Charge Including Chipping Of Rcc And Including All Labors, T&P Etc. Complete. Installation & Running Of 5 Hp /7.5 Hp Elctric/Diesel Engine Motor Pump Set With Suction Of 5 Meter Depth & Delivery Pipe Up To The Distance Of 70 Meter In Near By Pit Including Cost Of All Hire Charges Of Motor Pump Set, Operator And Fuel Etc. Complete As Pr Direction Of Engineer In Charge. Cartage Of Grass/Malwa By Tractor Trally Upto A Distance Of 1 Km From Periphery Of Area Cleared, Including Cost Of All Labour, T&P Etc. Such As Loading Unloading & Cartage, Tractor Trally, Driver, Fuel Required For Proper Comlplletion Of Work. Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up To Floor Five Level Excluding Dismantling & Relaying Of Old G.I Pipe With Supply And Fixing Of Approved G.I Fitting As Per Required For The Following Base,Including Threading Of Pipe It Required,Including Cutting And Making Good Wall. 15 Mm To 20 Mm Dia. Dismantling & Relaying Of Old G.I Pipe With Supply And Fixing Of Approved G.I Fitting As Per Required For The Following Base,Including Threading Of Pipe It Required,Including Cutting And Making Good Wall. 40 Mm To 80 Mm Dia. Providing And Fixing Bright Finished Brass/Aluminium Hanging Type Floor Door Stopper With Necessary Screws Of Approved Brand , Etc. Complete. Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For All Type Of Work Upto 52 Mts Floor As Per Specification. Providing And Fixing 110X25 Mm Outer Dia. Pvc Saddle Or 110Mm Outer Dia Pvc Including Rubber Ring. Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete For Semi Regid Or Flexibel Upto 40 Mm Dia. Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood Or Teak Wood(As Per Direction Of Engineer In Charge). Providing And Fixing Partition Upto Ceiling Height Consisting Of G.I. Frame And Required Board Including Providing And Fixing Of Frame Work Made Of Special Section Power Pressed/ Roll Form G.I. Sheet With Zinc Coating Of 120 Gms/Sqm(Both Side Inclusive), Consisting Of Floor And Ceiling Channel 50Mm Wide Having Equal Flanges Of 32 Mm And 0.50 Mm Thick, Fixed To The Floor And Fixed To The Studs Using Metal To Metal Flat Head Screws, Including Jointing And Finishing To A Flush Finish With Recommended Jointing Compound, Jointing Tape, Angle Beads At Corner (25 Mm X 25 Mm X 0.5 Mm), Joint Finisher And Two Coats Of Primer Suitable For Board As Per ManufactureS Specification And Direction Of Engineer In Charge All Complete. As Per Specification Of Dsr. Providing And Fixing 40 Mm Thickacid And/Or Alkali Resistant Tiles Of Approved Make And Colour Using Acid And/Or Alkali Resisting Mortar Bedding, And Joints Filled With Acid And/Or Alkali Resisting Cement Also Includs The Cost Of 10 Mm Thick Acid Proof Base/Lining As Per Is : 4457, Complete As Per The Direction Of Engineer-In- Charge.In Dado/Skirting On 12 Mm Thick Mortar 1:4 (1 Acid Proof Cement : 4 Coarse Sand) Acid And Alkali Resistant Tile. Supply Of 100 Mm Long 15 Mm G.I. Nozzle Including Cutting Holes In Rcc Slab, Column,Floor And Beam Including Its Fixing With Cement Mortar Including All Labour, T&P And Material Etc Complete As Per Direction Of Engineer-In-Charge. Pressure Grouting Of Crackes Honey Comb In Concrete Surface Expansion Joints Or Where Ever Required With Cement Grout Of Ratio One Part Of Cement, Four Parts Of Water And 3% Water Proofing Cicco No.3 Compound (Liquids) With The Help Of Grout Pump Of Appropriate Pressure Excluding Cost Of Fixing G.I. Nozzles Complete. As Per Engineer-In- Charge . Epoxy Adhesive Providing And Fixing Aluminum U Beading Of Required Size To Pre-Laminated/ Flush Door Shutter, Including Fixing Etc. Complete As Per Direction Of Engineer-In-Charge. Kg 435.10 Finishing With Epoxy Paint (Two Or More Coats) At All Locations Prepared And Applied As Per ManufacturerS Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete. On Concrete Work 12 Mm Thick Marine Plywood Conforming To Is: 710 Providing And Fixing 10 Mm Thick Acid And/Or Alkali Resistant Tiles Of Approved Make And Colour Using Acid And/Or Alkali Resisting Mortar Bedding, And Joints Filled With Acid And/Or Alkali Resisting Cement As Per , Complete As Per The Direction Of Engineer-In- Charge In Dado/Skirting On 12 Mm Thick Mortar 1:4 (1 Acid Proof Cement : 4 Coarse Sand) Acid And Alkali Resistant Tile Sqm 1607.70 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete Size Of Tile 600X600 Mm Sqm Providing And Fixing G.I. Union In Existing G.I. Union 50 Mm Nominal Bore Each Providing And Fixing G.I. Union In Existingg.I. Union 25 Mm Nominal Bore Each Providing And Fixing White Vitreous China Pedestal Type (European Type/ Wash Down Type) Water Closet Pan. Each 2276.95 Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. Each 297.55 12.5 Mm Thick Fully Perforated Gypsum Board Tile Made From Plasterboard Having Glass Fibre Conforming To Is: 2095 Part I, Of Size 595X595 Mm, Having Perforation Of 9.7X9.7 Mm At 19.4 Mm C/C With Center Borders Of 48 Mm And The Side Borders Of 30 Mm, Backed With Non Woven Tissue On The Back Side, Having An Nrc (Noise Reduction Coefficient) Of 0.79, With 50 Mm Resin Bonded Glass Wool Backing. Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required: White Glazed Fire Clay Kitchen Sink Of Size 600X450X 250 Mm Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than Providing And Fixing Ptmt, Push Cock Of Approved Quality And Colour. 15 Mm Nominal Bore, 98 Mm Long, Weighing Not Less Than 75 Gms Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels.Granite Of Any Colour And Shade 8.2.2.2 Area Of Slab Over Providing And Fixing Plastic Seat Cover With Lid For Pedestal Type W.C.Pan Complete : White Plastic Seat With Lid Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion. Bend 87.5° 110 Mm Bend Neat Cement Punning Fencing With Angle Iron Post Placed At Required Distance Embedded In Cement Concrete Blocks, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With Horizontal Lines And Two Diagonals Interwoven With Horizontal Wires, Of Barbed Wire Weighing 9.38 Kg Per 100 M (Minimum), Between The Two Posts Fitted And Fixed With G.I. Staples, Turn Buckles Etc. Complete. (Cost Of Posts, Struts, Earth Work And Concrete Work To Be Paid For Separately). Payment To Be Made Per Metre Cost Of Total Length Of Barbed Wire Used. 16.18.1 With G.I. Barbed Wire Metre Providing And Fixing G.I. Union In Existingg.I. Union 15 Mm Nominal Bore Each Dismantaling By Electrical Hilti Including Cost Of Gst 18% Pr 1100069168 Rfq 6000011061
Contract Date: Ref. Documents Contract Value : 44.22 Lakh
Government Departments No of Bidders 5
Uttar Pradesh View Result →
15.
Defence #11191790 Price Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Any Guage, Thickness, Including Nainital Pattern Or Similar Pattern Roof Covering Complete All As Specified And Directed. , S&F 0.63Mm Thick Galvanised Corrugated Ms Sheeting (Cgi Sheet Roofing) With Two Corrugation Side Laps, With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusive Fixed With Coach Screws And Washers As In Roofs Etc All As Specified , S&F 0.63Mm Thick Plain Galvanised Ms Sheeting Using Grade-O Sheets With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusives, As In Roof, Ridges, Hips, Valley Gutters, Drip And Straight Flashing Complete All As Specified And Directed. , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa (Az 150) As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , Demolition Of Brick Work Or Stone Masonry Precast Plain Cement Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Using Old Size Bricks Straight Or Curved On Plan Exc 6 Mtr Mean Radius, Built In Cm 1:6 All As Specified And Directed. , M&L For Precast Cement Concrete Block Masonery With Solid Block Of Cement Concrete 1:3:6 Type C-1 ( Using 20 Mm Graded Stone Aggregate) Exc 10 Cm In Width And Setting In Cm 1:6Complete All As Specified And Directed By Engg-In- Charge , Taking Down Cement Or Cement Lime Plaster Of Any Description On Brick Or Plain Cement Concrete Blocks Or Stone Wall Or Concrete Surface Etc Including Racking Out Joints, Hacking For Keys, Scrubbing Down With Water Etc All As Specified And Directed. , M&L For Rendering 15 Mm Thick Readymade Plaster On Inner/Outer Walls By Adding 17-19% Of Potable Water By Weight Of Material For Thickness Above 15Mm It Is Recommended To Be Applied In Multiple Layers. Ready Mix Plaster Shall Complies With Is 1661-1972, Is 2250-1965, Is 2402-1963 And Confirms The Compressive Strength @ 28 Days 10-12 Mpa/Bulk Density 1500-1600 Kg/M3. (Note : The Rate Quoted By Contractor Shall Include Cleaning Of Surface, Application As Per Instruction And Scaffolding Upto 20 Mtr Ht All As Specified And Directed) , M&L For Applying Two Coats Of Cement Base Paint Over A Coat Of Primer On Newly Plastered Surfaces Of Walls Including Preparation Of Surfaces Complete. , (M&L For Preparation Of New Plastered Surfaces & Applying A Layer Of Birla Putty 3Mm Thickness On Wall Surfaces Including Cornics Etc For Proper Levelling Of Plaster And Two Coat Of Oil Emulision Distemper Complete All As Specified And Directed. , (M&L Three Coats Of White Wash On Walls Including All Preparation Complete , M&L Preparation Of Old Surfaces Including Cornices Etc And One Coat Of Oil Bound Distemper Complete All As Specified And Directed. , M&L For Preparation Of Old Plastered Surfaces & Applying A Layer Of Birla Putty On Wall Surfaces Including Cornics Etc For Proper Levelling Of Plaster And Two Coat Of Oil Emulision Paint Complete All As Specified And Directed. , Dismantling Of Ceiling Board (Flbre Pulp, Insulation Etc) Or Insulation Boards/Slabs/Blankets Any Thickness, Including Cover Fillets Complete All As Specified And Directed. , S&F Of Powder Coated Grid Frame Work For False Celling Comprising Of The Following Sections For Making Partitions Of 600X600 Mm Size Fixed To Walls With Rawl Plugs & Screws And Hanged To Roof With And Including 4Mm Dia Gi Wire Suspender Of Suitable Length And Butterfly Clips, Size Of Main Tee Shall Be 28Mmx24mmx0.3Mm Thick , Cross Tee Shall Be 28Mmx24mmx0.3Mm Thick And Wall Angle Shall Be 24Mmx24mmx0.3 Mm Thick Incl 4 Mm Thick E-Board Classic (Make-Everest) For Insulation And Accoustic Purpose, 595 X 595 Mm Size Fixed With Staples On Snap Grid As In Ceiling With And Including Dusting Of Surface Complete All As Specified And Directed.Complete All As Specified And Directed , S&F Solid Pvc Wall Lining Dual Colour Consisting Of 5 Mm Thick Wood Grain Printed Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specification And Drawing Complete Fixing Arrangement Icluding Taking Down Old Existing Wooden Panelling Complete. , S & F For 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc 15Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed. , M&L For Cement Concrete 1:4:8 Type D-2 (Using 20Mm Graded Stone Agg) As In Foundation , Filling And Mass Concrete Complete All As Specified And Directed. , M&L 40 Mm Thick Plain Cement Concrete Type B-1 (1:2:4) Using 20 Mm Graded Stone Aggregate As In Flooring Finishing Cement Concrete Even And Smooth With Using Extra Cement Complete All As Spd , Surface Channel In Concrete 1:3:6 (40 Mm Graded Aggregate) For Drain Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Complete All As Pecified And Directed. Concrete, Using Ex- Tra Cement, Including Forms, Moulds, Mi- Tred/Stopped Ends Etc.All As Specified And Directed. , M&L For 75Mm Thick Cement Concrete 1:3:6 Type C-2 (Using 40Mm Graded Stone Agg) As In Plinth Protection Laid To Slope In Bays And Finishing The Surfaces Of Concrete Topping Fair And Even And Exposed Edges Fair Or Rounding Or Chamfering Laid In Panels Wit , M&L Chequred Tiles 300 X 300 X 25 Mm Coloured Glossy Finish Rubber Pressed Moulded Of Approved Pattern & Shade Make As Approved By Ge As In Floor Over 15 Mm Thick Screed Bed Or Bedding Layer In Cm(1:4) And Jointed Complete All As Specified And Directed. , M&L Interlocking Tiles 75-80 Mm Coloured Rubber Pressed Glossy Finish Thick Of Approved Pattern & Shade Isi Marked Or Approved By Ge Set Jointed Over 40 Mm Th Fine Sand Cushion Including Sides Are Tappered 75 Mm In Width By Plain Cement Concrete 1:3:6 Type C1 (Using 20Mm Graded Crushed Stone Agg.) Complete All As Specified And Directed. , Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And Directed. , Dismantling Of Timber Scantling 40 Sqcm And Over In Section In Any Position As In Framed Work Complete All As Specified And Directed , M&L For 2Nd Class Hard Wood Clean Sawn In As In Scantling Framed And Over 40Sqcm Fixed With Screws Etc All As Specified And Directed. , S&F 18Mm Thick Mdf Board Both Side Finished As In Wardrobe/ Cup Board Shutter All As Specified And As Directed By Engineer-In-Charge. , Dismantling Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors Laid Bedded And Pointed In Any Mortar, Aprons Etc. , M&L Plain Cement Concrete 1:5:10 Type E2 Using 40Mm Graded Aggregate As In Sub Base Complete All As Spd , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , M&L 300X450x7mm Thick Glazed Ceramic Digital Tiles Coloured Incl , Design And Pattern As Approved Fixed As In Vertical Surface Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Cement With Colour Pigment To Match Incl Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Complete All As Specified And Directed. , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.11 Sqm But N.Exc. 0.18 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigment Incl 15Mm Thick Screed Bed In Cm 1:6 Complete All As Spd , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.18 Sqm But N. Exc. 0.38 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigments Incl 15Mm Thick Screed Bed In Cm 1:6Complete All As Spd , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.18 Sqm But N. Exc. 0.38 Sqm In Skirting /Dado Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigments Incl Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Complete All As Specified And Directed.Complete All As Spd , M&L 18 To 20 Mm Thick Granite Stone On Steps Including Rubbing And Polishing And Making Hole For Gas Pipe And Front Portion Rounded And Chamfered Complete Including Screed Bedding 15 Mm Thick In Cm 1:4 Complete All As Spd , S&F In Repairs Parquet Flooring 8.3 Mm Thick Hard Board Plank Both Side Laminated With Decorative Surface And Approved By Ge Laid Above The Thermoplastic Sheet Complete All As Spd , Taking Up Or Down 15Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Taking Up Or Down 20Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , M&L For 15Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , M&L For 20 Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Bib Tap Long Body Cp, Screwed For Iron Pipes Complete All As Specified And Directed , S&F Angle Cock 15 Mm Bore Brass Chromium Plated, Screwed Both Ends For Pipes Or For Unions Fixed In Repairs Including Making Good To Match With Existing Surface , S&F In Repair Pillar Taps 15 Mm Bore, Brass Chromium Plated , Screwed Down High Pressure With Or Without Letter Hot Or Cold With Long Screwed Shanks And Fly Nut Complete All As Specified, Fixed In Repairs. , S&F Bib Tap Standard Of Ptmt (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath Fitting), Any Colour, Screwed Foriron Pipe 15 Mm Bore Pipe (Minimum Weight 90 Gm) All As Specified, Fixed In Repairs (Make : Prayag Or Equivelent As Approved) , S&F In Repair Polymer White (Polypropeylene Delrin And Abs) Low Level Flushing Cistern 10 Ltrs Capacity, Valveless, Syphonic Action Type Complete With Inlet, Ball Valve Float Valve, Bends Brackets, Rawl Plug, Brass Screws Handle Etc Complete, Complete All As Specified And Directed. , S&F In Repairs, 550X400mm Vitreous China, Wash Hand Basin , Flat Back With Pedestal Excluding Trap And Waste Chain And Plug And Porcelain Stopper Including Sutaible Size Brackets Waste Pipe And Waste Coupling Complete All As Specified And Directed. , S&F Vitreous China Squatting Pan Orrissa Pattern Size 580 X 440 Mm White With Intregal Foot Rests, With & Including P Or S Trap (Excluding Material & Labour Of Flushing Cistern And Flush Pipe) Including Conection To Trap And To Flush Pipe Etc Complete Including Making Good To Floor Complete All As Specified And Directed Fixed In Repairs. , Dismantling Water Tanks 500 Ltrs Capacity Complete All As Specified And Directed. , Dismantling Water Tanks Of Any Description, Capacity Exceeding 500 Litres But Not Exceeding1000 Liters Complete , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 500 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Make - Prayag Complete All As Specified And Directed. , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 1000 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Make - Prayag Complete All As Specified And Directed. , S&F 20 Mm Dia Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Road & High Density Plastic Ball Screwed For Iron Pipe And Fixed In Repairs (Min Weight 210 Gm). , S&F 15 Mm Dia Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Road & High Density Plastic Ball Screwed For Iron Pipe And Fixed In Repairs (Min Weight 210 Gm). , S&F Pvc Circular Top Cover Suitable To Rotational Moulded Polyethylene Water Storage Tanks Of 500 /1000 Litres Capacity Tanks Of Standard Mares, With 6 Mm Dia Nut And Bolts On Two Ends Of Cover To Act As Hinge As Will As Locking Arrangement For Side Opening , S&F In Repairs Sinks With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboratory With Plugs,Washers And Wastes,Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cautilever Brack Etc And Connecting Union To Pipe Over All Size 915Mmx460mm Bowl Size 405Mm X 354Mm X 178Mm As Approved By Gecomplete All As Specified And Directed. , S&F Pvc Whb Waste Pipe 32/40 Mm Dia Compolete All As Spd , S & F In Repairs 15 Mm Bore Fancy Type Chromium Plated Wall Mixer With Provision For Overhead Shower With 115Mm Long Bend Pipe On Upper Side, Connecting Legs And Wall Flanges, Screwed Down High Pressure With Or Without Lettered Hot And Cold Screwed For Iron Pipe Complete All As Specified And Directed. , S&F, 5.50 Mm Thick Looking Mirror Of Selected Quality Glass, Size 60 Cm X 45 Cm, Mounted On 6Mm Thick Commercial Plywood And Fixed To Wooden Plug With C.P. Brass Screws And Cup Washers With & Including Plastic Fancy Frame Alround All As Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each.& Removing To Or From Store All As Specifed & Directed. , Taking Down Chowkats Or Frames Exc 1.5 Sqm But Not Exc 4 Sqm Each With Shutters (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , M&L For Second Class Hard Wood Plain, Solid, Straight Chowkats And Frames, Wrought, Frame Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed. , S&F Factory Made 35Mm Thick Plain Framed, Panelled Shutter (Two Panel) With Lock Rail And Panel Of 9 Mm B.W.P. Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 (Part I), Kiln Seasoned And Chemically Pressure Treated All As Specified , S & F 35 Mm Thick Second Class Hard Wood Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc., Rs, Edges Of Framing Plain, Chamfered Complete All As Specified And Directed. , Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/ Window/ Ceosetory Window & Other Frames/ Chowkhat Of Size 45 X 70 Mm Comprising Of Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wwod Powder/ Rick Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Stat Headed Ss Screws Having Minimum Frame Density Of 750 Kg/ Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Compressive Strength Of 58 N/Mm2, Modules Of Elasticity 900 N / Mm 2 And Resistance To Spread Of Flame Of Class A Catogory With Property Of Being Termite/ Borer Proof, Water / Moisture Proof And Fire Retardant And Fixed In Position With Ms Hold Fast/Lugs / Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In-Charge (M.S. Hold Fast/ Lugs Or Ss Dash Fasteners Shall Be Paid For Separately). , Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Plain Flush Door Shutter Of 35 Mm Thick Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/ Cum And Screw Withdrwal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N Mm2 Modulus Of Elasticity 850 N / Mm2 And Resistance To Spread Of Flame Of Class A Catogary With Property Of Being Termite/ Borer Proof, Water/ Moisture Proof And Fire Retardanat And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws, All As Per Direction Of Engineer-In-Charge (Note:- Stainless Steel Butt Hinges And Necessary Ss Screws Shall Be Paid Separately. , S&F Aluminium Powder Coated Door With Shutter And Frame Of Aluminium Section Sliding Type As Per Following Specifications With And Including Round Type Aluminium Handle, Tower Bolts, Hinges, Panes Etc And As Directed At Site. Make Jindal Or Its Equivalent Approved Make:- (A) Door Frame : 100 X 44 X1.6 Mm Section For Complete Frame. (B) Door Shutter : Top & Bottom Rail Of 100X44x1.6 Mm, Middle Rail Of 83 X 44 X 1.6Mm, Both Styles Of 83 X 44 X 1.6 Mm Size Shall Be Used. (C) Glass Pane : 5Mm Thick Sun Broken Glass Fixed With Gasket With Aluminium Clip , Jointing Clips, Glazing Clips, Rubber Packing, Screws Etc. (D) Jointing Cleats, Glazing Clips, Rubber Packing, Anodized Aluminium Snap Beading, Screws, Anodized Aluminium Fittings Such As 100Mm Long 03 Nos. Hinges, Aluminium Handles , Aluminium Tower Bolts ,And Mortice Lock 6 Levers Etc Complete All As Specified And Directed , M&L For Taking Down Existing Aluminium Door Shutter Carefully Without Damage Of Glass Panesincluding Replacing Aluminium Clip , Jointing Clips, Glazing Clips, Rubber Packing, Screws Etc As Reqd At Site And Refixing The Same After Complete Repairs All As Specified And Directed ( Note- Any Replacement Of Aluminium Rails Or Stiles If Reqd To Be Replaced Will Be Measured Seperately ) , S&F In Repairs Double Action Floor Spring Hydraulicaly Regulated Made Up Of Minimum 1.25Mm Thick Aluminium Alloy Sheet Foundation Box Main Body With Stainless Steel Cover Governing Pivot Made Brass Other Parts Made Of Mild Steel Heavy Duty And Fixed Complete All Specified , S&F Aluminium Partition Powder Coated Of Frame Of Aluminium Section 44.45 X 44.45 X 1.6Mm Etc And 5 Mm Thick Sun Broken Glass Fixed With Gasket With Aluminium Clip , Jointing Clips, Glazing Clips, Rubber Packing, Screws Etc.And As Directed At Site. Make Jindal Or Its Equivalent Approved Make Including Taking Down Old Userviceable Wooden Partition Completeall As Spd , S&F 100Mm Size Ms Butt Hinges, Medium Weight, Cold Rolled And Fixed Complete All As Specified And Directed. , S&F 150Mm Long Aluminium Tower Bolt And Fixed Complete All As Specified And Directed. , S&F 125 Mm Size Aluminium Handle Plate Type Anodised Complete All As Specified And Directed. , S&F In Repairs Hydraulic Door Closer Aluminium ( Die Cast) Regulated Designation No-3 Universal Type For Door Shutter Complete All As Spd , Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden/Metal Frames, Glazed With Putty Or Fixed With Beads Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones All As Specified , S&F 3 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square Not Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed. , S&F In Repairs Of Galvanised Mild Steel Wire Cloth 0.45 Mm Nominal Dia Of Wire And Average Width Of Aperature 1.18Mm And Fixed With Tinned Tacks Or Galvanised Wire Staples Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description,Not Otherwise Described Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Fixing Of Hold Fast, Bed Blocks Etc Including Necessary Form Work As Required Complete All As Specified And Directed. , Demolition And Breaking Up Drains Pipes(150Mm Size) Salt Glazed Ware, Ac Or Reinforced Concrete Set In Cement Mortar Complete All As Specified And Directed. , S&F 110Mm Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Wall And In Floors Complete All As Specified And Directed , S&F Of 75 Mm Bore Pvc (Swr) Pipe Single Socketed In As Length With Rubber Ring As In Vent Pipe Complete All As Specified And Directed , S&F In Repairs Of 110 Mm Dia Pvc (Swr) Bend Complete All As Specified And Directed. , S&F In Repairs Of 75 Mm Dia Pvc (Swr) Bend Complete All As Specified And Directed. , S&F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D; Type, 60 Cm Long Between Flanges Complete All As Specified And Directed. , S&F Chromium Plated Soap Disk Fixed To Plug With Chormium Plated Brass Screws All As Specified And Directed , S & F 20Mm Dia Aluminium Alloy Anodised Curtain Rod Decorative Fency Type With Brackets Complete All As Specified. , S&F Mild Steel Work As Hold Fasts, Bands, Straps, Supports Or Stays For Pipes Eaves Gutter Including Bolts If Required, Hooks (Stay), Clamps And Similar Small Articles, Conforming Tofe 310-0 Or Fe 410-0 Complete All As Specified And Directed. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For. , S&F Mild Steel Framed Work Such As Purlin , Truss, Square Tube , Ms Pole , Grating Etc With End Of Bars Shouldered And/ Or Riveted Or Forged Into Spikes, Framed Guard Bars, Barred Iron Doors, Ladders, Framed Balusters, Walk Ways, Railings, Welded Wire Mesh And Similar Work Confirming To Fe-290 Gde E-165 Complete All As Specified And Directed. , M&L For Preparation Of Old Or Previously Treated Wooden Surfaces Of Any Description,Not Otherwise Descri- Bed Over 10Cm Width Or Girth And Applying One Coats Of Synthetic Enamel Paint Complete All As Specified And Directed.. The Contractor Shall Make Necessary Arrangement Of Scaffolding And Ensure Safety Of Labours. , S& F In Repair Vitreous China Premium/ 1St Quality Wash Down Water Closet Wall Hung Ewc White/ Ivory/Off White (Closed Pattern Incl All Necessary Accessories Like Rag Bolts/ Gel Gasket Etc. (Excluding Flushing Cistern & Flush Pipe) Complete In All Respect All As Specified. , Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S & F 20Mm Dia Aluminium Alloy Anodised Curtain Rod Decorative Fency Type With Brackets Complete All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Uttarakhand View Result →
16.
Defence #11191783 Price Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Any Guage, Thickness, Including Nainital Pattern Or Similar Pattern Roof Covering Complete All As Specified And Directed. , Demolition Of Brick Work Or Stone Masonry Precast Plain Cement Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , Taking Down Cement Or Cement Lime Plaster Of Any Description On Brick Or Plain Cement Concrete Blocks Or Stone Wall Or Concrete Surface Etc Including Racking Out Joints, Hacking For Keys, Scrubbing Down With Water Etc All As Specified And Directed. , Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And Directed. , Dismantling Timber Scantlings 40 Sq. Cm And Over In Section, In Any Position Complete All As Specified , Taking Up Or Down 15Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Taking Up Or Down 20Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Dismantling Water Tanks 500 Ltrs Capacity Complete All As Specified And Directed. , Dismantling Water Tanks Of Any Description, Capacity Exceeding 500 Litres But Not Exceeding1000 Liters Complete. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each.& Removing To Or From Store All As Specifed & Directed. , Taking Down Chowkats Or Frames Exc 1.5 Sqm But Not Exc 4 Sqm Each With Shutters (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , Dismantling Of Ceiling Board (Flbre Pulp, Insulation Etc) Or Insulation Boards/Slabs/Blankets Any Thickness, Including Cover Fillets Complete All As Specified And Directed. , S&F In Repairs Of Galvanised Mild Steel Wire Cloth 0.45 Mm Nominal Dia Of Wire And Average Width Of Aperature 1.18Mm And Fixed With Tinned Tacks Or Galvanised Wire Staples Complete All As Specified And Directed. , Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden/Metal Frames, Glazed With Putty Or Fixed With Beads Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones All As Specified , S&F 4 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square Not Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed. , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa (Az 150) As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , S&F 0.63Mm Thick Galvanised Corrugated Ms Sheeting (Cgi Sheet Roofing) With Two Corrugation Side Laps, With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusive Fixed With Coach Screws And Washers As In Roofs Etc All As Specified , S&F 0.63Mm Thick Plain Galvanised Ms Sheeting Using Grade-O Sheets With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusives, As In Roof, Ridges, Hips, Valley Gutters, Drip And Straight Flashing Complete All As Specified And Directed. , S&F Of Powder Coated Grid Frame Work For False Celling Comprising Of The Following Sections For Making Partitions Of 600X600 Mm Size Fixed To Walls With Rawl Plugs & Screws And Hanged To Roof With And Including 4Mm Dia Gi Wire Suspender Of Suitable Length And Butterfly Clips, Size Of Main Tee Shall Be 28Mmx24mmx0.3Mm Thick , Cross Tee Shall Be 28Mmx24mmx0.3Mm Thick And Wall Angle Shall Be 24Mmx24mmx0.3 Mm Thick Incl 4 Mm Thick E-Board Classic (Make-Everest) For Insulation And Accoustic Purpose, 595 X 595 Mm Size Fixed With Staples On Snap Grid As In Ceiling With And Including Dusting Of Surface Complete All As Specified And Directed.Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Using Old Size Bricks Straight Or Curved On Plan Exc 6 Mtr Mean Radius, Built In Cm 1:6 All As Specified And Directed. , M&L For Rendering 15 Mm Thick Readymade Plaster On Inner/Outer Walls By Adding 17-19% Of Potable Water By Weight Of Material For Thickness Above 15Mm It Is Recommended To Be Applied In Multiple Layers. Ready Mix Plaster Shall Complies With Is 1661-1972, Is 2250-1965, Is 2402-1963 And Confirms The Compressive Strength @ 28 Days 10-12 Mpa/Bulk Density 1500-1600 Kg/M3. (Note : The Rate Quoted By Contractor Shall Include Cleaning Of Surface, Application As Per Instruction And Scaffolding Upto 20 Mtr Ht All As Specified And Directed.Make Fosroc/ Sika/ Ultrarech/ Choksey , M&L For Preparation Of New Plastered Surfaces & Applying A Layer Of Birla Putty On Wall Surfaces Including Cornics Etc For Proper Levelling Of Plaster And Two Coat Of Oil Emulision Distemper Complete All As Specified And Directed. , M/L For Complete Removal Of Existing Treatment For Preparing Old Painted Surfacess And Applying Two Coat Of Distemper Oil Emulsion Over A Coat Of Primer Complete All As Specified And Directed. , M&L Three Coats Of White Wash On Ceiling Including All Preparation Complete All As Sopecified , Material & Labour For Applying Two Or More Coats Of 100% Remium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance,Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives@ 1.43 Litre/ 10 Sqm Over And Including Primingcoat Of Exterior Primer Applied @ 0.90 Litre/ 10Sqm Over New Surfaces Complete All As Specified And Directed. , M&L Preparation Of Old Surfaces Including Cornices Etc And One Coat Of Oil Bound Distemper Complete All As Specified And Directed. , S&F 20Mm Thick 2Nd Class Soft Wood (Chir) Boarding Planned One Side Fixed With Butt Joints With Nails In Any Situation/Position Except Flooring And Skirting Complete All As Specified And Directed. , M&L For 2Nd Class Hard Wood Clean Sawn In As In Scantling Framed And Over 40Sqcm Fixed With Screws Etc All As Specified And Directed.. , S&F In Repair 110Mm Dia Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Joints Fixed To Walls Or Laid In Trenches Etc Complete. , S&F In Repair 75Mm Dia Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Joints Fixed To Walls Or Laid In Trenches Etc Complete. , M&L 300X450x7mm Thick Glazed Ceramic Digital Tiles Coloured Incl , Design And Pattern As Approved Fixed As In Vertical Surface Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Cement With Colour Pigment To Match Incl Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Complete All As Specified And Directed. , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.11 Sqm But N.Exc. 0.18 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigment Incl 15Mm Thick Screed Bed In Cm 1:6 Complete All As Spd , M&L For 15Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , M&L For 20 Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Bib Tap Long Body Cp, Screwed For Iron Pipes Complete All As Specified And Directed , S&F Angle Cock 15 Mm Bore Brass Chromium Plated, Screwed Both Ends For Pipes Or For Unions Fixed In Repairs Including Making Good To Match With Existing Surface , S&F Pillar Taps 15 Mm Bore, Brass Chromium Plated , Screwed Down High Pressure With Or Without Letter Hot Or Cold With Long Screwed Shanks And Fly Nut Complete All As Specified, Fixed In Repairs. , S&F Bib Tap Standard Of Ptmt (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath Fitting), Any Colour, Screwed Foriron Pipe 15 Mm Bore Pipe (Minimum Weight 90 Gm) All As Specified, Fixed In Repairs (Make : Prayag Or Equivelent As Approved) , S&F In Repair Polymer White (Polypropeylene Delrin And Abs) Low Level Flushing Cistern 10 Ltrs Capacity, Valveless, Syphonic Action Type Complete With Inlet, Ball Valve Float Valve, Bends Brackets, Rawl Plug, Brass Screws Handle Etc Complete, Complete All As Specified And Directed. , S&F In Repairs, 550X400mm Vitreous China, Wash Hand Basin , Flat Back With Pedestal Excluding Trap And Waste Chain And Plug And Porcelain Stopper Including Sutaible Size Brackets Waste Pipe And Waste Coupling Complete All As Specified And Directed. , S&F Vitreous China Squatting Pan Orrissa Pattern Size 580 X 440 Mm White With Intregal Foot Rests, With & Including P Or S Trap (Excluding Material & Labour Of Flushing Cistern And Flush Pipe) Including Conection To Trap And To Flush Pipe Etc Complete Including Making Good To Floor Complete All As Specified And Directed Fixed In Repairs. , S& F In Repair Vitreous China Premium/ 1St Quality Wash Down Water Closet Ewc White/ Ivory/Off White (Closed Pattern Incl All Necessary Accessories Like Rag Bolts/ Gel Gasket Etc. (Excluding Flushing Cistern & Flush Pipe) Complete In All Respect All As Specified. , M&L Pvc (Swr) Floor Trap 75Mm Dia Plain With Grating Including Jointing With Solvent Cement Etc Complete, Fixed In Repair. , S&F Pvc Circular Top Cover Suitable To Rotational Moulded Polyethylene Water Storage Tanks Of 300 /500 Litres Capacity Tanks Of Standard Mares, With 6 Mm Dia Nut And Bolts On Two Ends Of Cover To Act As Hinge As Will As Locking Arrangement For Side Opening , M&L For Sunken Floor Treatment As Described As Under (I) To (Vii) :- (I) Demolition Of Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided Or In Any Type Of Filling In Sunken Portion & Cleaned The Sunken Portion Incl Vertical Wall Surface Complete As Directed. (Ii) M&L To Fill The Sunken Floor With Plain Cement Concrete ( 1:5:10) Type E-2 Using Bk Aggregate Over The Treated Surface Complete All As Specified And Directed. (Iii) M& L 40Mm Thick (Min) Plain Cement Concrete (1:2:4) Type B-0 Using 12.5 Mm Graded Stone Aggregate With Integral Water Proofing Compound As Per Manufacturer Instructions On Bottom Of Sunken Portion With Proper Slope Towards Spout. Vertical Sides Shall Be Plastered In Cm (1:3) 15 Mm Thick Mixed With Water Proofing Compound As Per Manufacturer Instructions. Plaster Shall Be Extended Over Plain Cement Concrete Coving When The Same Is Green I.E. Plain Cement Concrete & Plaster Be Carried Out At The Same Time Complete All As Specified And Directed.(Iv) After Laying Sewage/ Plumbing Pipes With Fixtures In Position 2 Coats Of Omiplas Ep-101 Epoxy Compound Shall Be Applied Complete All As Specified And Directed.(V) Spouts Of 25Mm Dia Gi Pipe Light Grade Projecting 450Mm Clear Of Face Outer A Wall With Mosquito Proof Cap On Inner Face Of Pipe Shall Be Provided To Drain Out Seepage Water ,Including Cutting Holes And Making Good If Needed As Specified And Directed. (Vi) Test Again Of Water Tightness By Pounding For 72 Hours & Rectify Defects If Any Till Total Elimination Of Defects Complete All As Specified And Directed.The Sunken Portion Shall Be Tested For Leakage / Seepage / Dampness By Pounding With Water For 72 Hours. In Case Any Defect Is Noticed The Portion Shall Be Grouted With Cement Slurry Mixed With Suitable Chemical & Tested Again. The Process Of Grouting And Testing Shall Be Repeated Till Leakage / Seepage / Dampness Is Eliminated. , Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/ Window/ Ceosetory Window & Other Frames/ Chowkhat Of Size 45 X 70 Mm Comprising Of Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wwod Powder/ Rick Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Stat Headed Ss Screws Having Minimum Frame Density Of 750 Kg/ Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Compressive Strength Of 58 N/Mm2, Modules Of Elasticity 900 N / Mm 2 And Resistance To Spread Of Flame Of Class A Catogory With Property Of Being Termite/ Borer Proof, Water / Moisture Proof And Fire Retardant And Fixed In Position With Ms Hold Fast/Lugs / Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In-Charge (M.S. Hold Fast/ Lugs Or Ss Dash Fasteners Shall Be Paid For Separately). , Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Plain Flush Door Shutter Of 35 Mm Thick Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/ Cum And Screw Withdrwal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N Mm2 Modulus Of Elasticity 850 N / Mm2 And Resistance To Spread Of Flame Of Class A Catogary With Property Of Being Termite/ Borer Proof, Water/ Moisture Proof And Fire Retardanat And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws, All As Per Direction Of Engineer-In-Charge (Note:- Stainless Steel Butt Hinges And Necessary Ss Screws Shall Be Paid Separately. , S&F Mild Steel Work As Hold Fasts, Bands, Straps, Supports Or Stays For Pipes Eaves Gutter Including Bolts If Required, Hooks (Stay), Clamps And Similar Small Articles, Conforming Tofe 310-0 Or Fe 410-0 Complete All As Specified And Directed. , S&F 100Mm Size Ms Butt Hinges, Medium Weight, Cold Rolled And Fixed Complete All As Specified And Directed. , S&F 150Mm Long Aluminium Tower Bolt And Fixed Complete All As Specified And Directed. , S&F 125 Mm Size Aluminium Handle Plate Type Anodised Complete All As Specified And Directed. , M & L For Roof Surface Must Be Pressure-Washed With Water With, Is To Be Used To And/ Or Remove All Dirt, Dust, Chalking And Waste Products. Remove Algae, Mold By Using Bleach Solution. 2 Tiles Joint Repair All Visible And Joint More Than 0.50Mm And Not Giving Hollow Sound, On The Tiles Roof Or At The Junctions Of Flat Roof & Vertical Parapet Wall, Pipe Joints, Should Be Cut And Widen V Shape With Mechanical Cutter In The Size (6Mm W X 6Mm D) And Fill With Pmm Methodology.Glass Fiber Apply Urp Or Primeseal A On The Well Prepared Groove, Allow To Cure Tack Free. Followed By Filling All The Joints Covering The Entire Area Uniformly With Suitable Chemical. Allow Chemical To Cure A Minimum 24 Hours. Apply Minimum 50Mm-100Mm Width 45 Gms Glass Fibre Mesh/ Non-Woven Geo Testile Fleece With The Coat Of Roofseal Classic Along The Length Of Crack When The 1St Coat Is Still In Wet Condition. Apply The Second Coat With An Interval If 4-6 Hours. Waterproofing: Apply A Coat Of Roofseal Classic (Diluted With Water In The Ratio 2:1) As Self Priming 14.0-18.0 Sq. Mt/Litre.Allow Coating To Dry For 3-4 Hours. Applt Two Coats Of Dr Fixit Roofseal Classic/Litre/Coat, Without, The Rate Of Application Being The Same For Both The Coats. This Would Ensure Correct Consumption Of Material That Will Deliver A Total Of Dft Of Microns. Allow The System To Air Cure For 5 Days Minimum. Check To See No Void Surface Is Left Untreated/Uncoated. The Material Having Following Technical Specification As Per Astm D 6083 M- Type Ii, Attains A Tensile Strength Of 2.5 N/Mm2 Confirming To Astm D 2370: Elongation At Break 300% Confirming Astm D 2370, Adhesion To Concrete 2.0N/Mm2 Confirming Astm D 4541 And Crack Bridging Ability Up To 2Mm, Air Cure The Coating For 7 Days Before Water Pound Test For 48 Hrs. The System Comes With 7 Year Waterproofing Warranty From Service Provider. For Vertical Surface : Apply 2 Coat Of Dr Fixit Roofseal Classic With Forced Coverage Of /Litre/Coat. Entire Terrace Should Be Coated With Roofseal Classic Alongwith Parapet Walls Needs To Be Enveloped With Roofseal Classic/Raincoat System. The Total 3 Coats Treatment Inclu Taking Down/Dismantling Of Old Tarfelt/Old Unserviceable Roof Treatment From Reinforced Cement Concrete Roof By Scrapping, Broomig And Washing With Water Etc Including 10Mm Thick Rendering In Cm 1:3 With Water Proofing Compound Complete All As . Make : Dr Fixit, Asian Or Equivalent (Note : The Treatment Should Be Carried Out Through Authorised Applicator Only) , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 500 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Complete All As Specified And Directed. , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 1000 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Complete All As Specified And Directed. , S & F 20Mm Dia Aluminium Alloy Anodised Curtain Rod Decorative Fency Type With Brackets Complete All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttarakhand View Result →
17.
Agriculture #11175867 Technical Bid
Tender for Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter. All Kinds Of Soils , Clearing And Grubbing Road Land Clearing And Grubbing Road Land Including Uprooting Wild Vegetation, Grass, Bushes, Shrubs, Saplings And Trees Of Girth Upto 300 Mm, Removal Of Stumps Of Such Trees Cut Earlier And Disposal Of Unserviceable Materials And Stacking Of Serviceable Material To Be Used Or Auctioned, Upto A Lead Of 1000 M Including Removal And Disposal Of Top Organic Soil Not Exceeding 150 Mm In Thickness As Per Morth Specification Clause 201. By Mechanical Means In Area Of Thorny Jungle , Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300-1 And 300-2 With A Lead Upto 50 M As Per Morth Specification Clause 305.3 , Carriage Of Earth, Sand, Lime, Morrum Manure Or Sludge For 5 Km. , Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Meter Lead. , Dismantling Stone Slab/ Terrazo Chip Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. , Carriage Of Building Rubbish Stone Metal (Grit And Ballast Etc.) Up To 50 Mtr Lead , Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix 1: 3: 6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). , Providing And Laying In Position Specified Grade Of Cement Concrete For All Reinforced Cement Concrete Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement. M20 Grade Nominal Mix / Design Mix , Providing And Fabricating Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Up To Floor Five Level. (Original Producers Who Manufacture Billet Directly From Iron Ores And Roll The Bilets To Produce Steel Conforming To Is:1786) Thermo-Mechanically Treated Bars (Conforming Of Relevent Is Code) , Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways And Removal Of Formwork For Foundation , Footings, Strap Beam, Raft , Bases Of Columns Etc. , Providing And Laying Damp-Proof Course With Cement Concrete Grade M-150 (1 : 2 : 4) Mortar Prepared With 1% Solution Of Water-Proof Compound Complete As Per Specification 50Mm Thick. , Random Rubble Stone Masonry For With Hard Stone In Foundation And Plinth In Cement Sand Mortar Above 30 Cm Thick Wall In: Cement Mortar 1:6 ( 1-Cement : 6-Sand). , Random Rubble Dry Stone Kharanja Under Floor. , Supply And Installation Of Multi Rib Proofing/Cladding Sheet Manufacture Out Of 0.50Mm Tct (Total Coated Thickness) High Tensile Zinc Aluminum Alloy Coated Galvalume Steel (As Per 150Gsm Zinc Aluminum Coated 550Mpa Tuekd Strength) Confirming To Is: 1397/Astm A-792 Sheet To Have Wide Pens 30Mm High Nb At 250 Centre And Centre Width Of 1020Mm Sheets Be Casted With Regular Modified Polyster System On A Continuous With Line On Centre For Face And With A Polyster Coating Respectively Sheet Shall Have Proportionality With Siphoned Plate Made To Prevent Leakage Sheet Shall Be Fixed By More Of Sell Drilling Lift Tapping Hot Dip Zinc Coated Hox Head Fasterner Of Size 12X14x55mm Long. The Sheet Shall Be Supplied In Cost One Length And For A Minimum Up To 12Mts With All Scaffolding. , Brick Work With Mechanised Autoclaved Flyash Lime Bricks Conforming To Is: 12894 :2002 Of Class Designation 100 In Superstructure Above Plinth Level Upto Floor V Level In. Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) , Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) For Area Of Each Slab From 2001 To 5000 Sq.Cm , Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300mm Confirming To Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). , Providing And Fixing Of Double Leaf Steel Shutter For Cupboard, The Frame Is Made Of Pressed Steel Isi Section 80X25 Mmx 1.25 Mm Thick With 1.00 Mm Ms Sheet To Spot Welded Including Holdfasts Of 15X3mm, Ms Oxidized Fittings Such As Butt Hinges, Sliding Doors Bolts, Handles, Tower Bolts And Twin Peg Etc Complete Including Applying Priming Coat Of Approved Steel Primer Of Red Oxide Zinc Chromate And Spray Painting In Approved Shade With Deco Paint Of Approved Quality Complete As Per Direction Of Engineer In Charge , Supplying And Fixing In Walls Machine Cut And Polished Stone Shelves, Tands And In Cm 1:3 With Machine Cut Edges : Kota Stone Minimum 30Mm Thick. , Providing And Fixing 1St Quality Standard White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 & Is :15622 Of Size 200Mm X 300Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Pillar). , Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12Mm (Av.) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Jointing With White Cement Mortar 1:2 (1White Cement : 2 Marble Dust) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Jhunjhunu /Jalore (Red/Choclate/Black/ Pink Colour) Above 3601 Cm2 Slabs , Extra For Providing Edge Moulding To 15-18Mm Thick Marble/ Granite/Kota Stone Counters, Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Granite/Kota Stone Work Full Edge Moulding , Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joints Etc. Complete Fine Finish : 12 Mm Thick . , Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand) , Repair Of Door, Window Shutters Including Cost Of Material And Labour For Change Of Damaged : Style/Rail Of Teak Wood 30Mm Thick/ Aluminium Section 4Wide , Renewing Glass Panes And Refixing Existing Wooden Fillets : 5Mm Thick Plain Glass Panes. , Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats,Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide , Providing And Fixing Steel Glazed Window Frame Made Out Of 80X40 Mm Hollow Sheet Section Of 16 Gauge Thickness, Joint Mitred Welded And Grinded Including Hold Fast Of Steel Lugs 13Mm X 3Mm And 15 Cm Long Embedded In C C Block 15 X 10 X 10 Cm Of 1:3:6 Nominal Concrete And Including Fixing Of Pivoted Hinges Of Superior Quality, Window Shutters Made Out Of 50 X 25.0 Mm Hollow Steel Section 15 Mm Paitam Of 18 Gauge Thickness, Joint Mitred And Grinded Including 10Mm X 10Mm Square Bars Welded To Frame For Paitam Fixing Float Glass 4Mm Thick Panes With Glazing Clips And Metal Sash Putty And Fixing Of Shutters Frames Peg Stay, U Shape Handle 100 Mm Long, Tower Bolts 100 Mm Long Of Steel Powder Coated Superior Quality Including Fixing And Jointing With Frame Hinges Priming Coat With Steel Primer Complete In All Respect As Per Direction Of Engineer-In -Charge Window Openable. , Window Fixed. , Extra For Additional Shutter In Pipe Section Windows With Wire Gauge 14 Mesh X 24 Gauge , Making Khurras 450 X 450Mm With Average Minimum Thickness 50Mm Cement Concrete 1 : 2:4 Over P.V.C. Sheet 1 Mtr. X 1 Mtr. X 40Micron Finished With 12Mm Cement Plaster 1 : 3 And One Coat Of Neat Cement, Rounding Edges And Making And Finishing The Out Let Complete. , Providing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead And Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces) Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Whenever Required. 0.80 Mm Thick With Zinc Coating Not Less Than 275 Gm/M2 , Providing And Fixing Welded Mesh/Expanded Metal Mesh In Frame Work, Flat Iron Beading 20X3mm Including Top Cross Laps Inside And Out Sides Welding, Iron Bolts, Crews, Clips Etc. Complete (Excluding Frame Work) Of Size. Welded Mesh 25 Mmx 25 Mm X 2.1 Mm , Providing And Fixing Pressed Steel Door Frames Confirming To Is 4351 Manufactured From Commercial Mild Steel Sheet Of 1.25 Mm Thickness Including Hinges Jamb, Lock Jamb, Bead And If Required Angle Threshold Of Mild Steel Angle Of Section 50X25mm, Or Base Ties Of 1.25Mm Pressed Mild Steel Welded Or Rigidly Fixed Together By Mechanical Means, Adjustable Lugs With Split End Tail To Each Jamb Including Steel Butt Hinges 2.5Mm Thick With Mortar Guards, Lock Strike-Plate And Shock Absorbers As Specified And Applying A Coat Of Approved Steel Primer After Pre-Treatment Of The Surface Including Filling With cement concrete 1:2:4(M15 Grade) Complete As Directed By Engineer-In-Charge : Profile B , Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure A : 30 Mm Thick . Commercial Veneer Both Side , Extra For Providing External Lipping With 2Nd Class Teak Wood Battens 6 Mm Minimum Depth On All Edges Of Shutters (Over All Area Of Door Shutter To Be Measured) Over Item No. 8.13. , Providing & Fixing Mica Of Approved Make For Inner/Outer Side Of Shutters With Fevicol & Nails Complete As Per Approved By Engineer In Charge. 0.8Mm Thick Mica , Providing And Laying Of Interlocking M-30 Grade Concrete Block Pavements Having Thickness 60 Mm As Per Drawings And As Per Is 15658:2006.And Materials Conforming To Morth Specification Clause 602 With M-30 Grade 0.30 Mtr X 0.30 Mtr X 0.15 Mtr Edge Blocks. Category B : Dentated Only Two Side Like I,Z,T Shape As Per Irc:Sp:63-2004 , Granular Sub-Base With Close Graded Material (Table:- 400-1) Plant Mix Method Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means. For Grading-Iii Material , Dry Lean Cement Concrete Sub - Base. Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing. , Grading Roof For Water Proofing Treatment With Water Proffing Compound Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 10Mm And Down Gauge) Including Finishing With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) As Per Standard Design : , Providing And Laying Water Proofing Treatment On Roofs Of Slabs By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : , After Surface Preparation, First Layer Of Slurry Of Cement @ 0.488 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg/Sqm. , Laying Second Layer Of Fiber Glass Cloth When The First Layer Is Still Green . Overlaps Of Joints Of Fiber Cloth Should Not Be Less Than 10 Cm . , Third Layer Of 1.5 Mm Thickness Consisting Of Slurry Of Cement @ 1.289 Kg/Sqm Mixed With Water Proffing Cement Compound @ 0.670 Kg/Sqm And Coarse Sand @ 1.289 Kg/Sqm. This Will Be Allowed To Air Cure For 4 Hours Followed By Water Curing For 48 Hours. The Entire Treatment Will Be Taken Upto 30Cm On Parapet Wall And Tucked Into Groove In Parapet All Around , Fourth And Final Layer Of Brick Tiling ‘With Cement Mortar Or Any Other Approved Protective Coarse. (Which Will Be Paid For Separately) For The Purpose Of Measurement The Entire Treated Surface Will Be Measured , Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: Old Work (One Or More Coats ) , Two Or More Coats On New Work Including Prepartion Of Base With Primer, Putty, Lippy Etc Complete In All Respect. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work , One Or More Coats On Old Work. , Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete New Plastered Surface (Three Or More Coats) , Finishing Wall With Water Proofing Cement Paint Of Approved Brand And Manufacture And Or Required Shade To Give An Even Shade Including All Scaffolding: Old Work (One Or More Coats). , Painting Exterior Surface Of Wall With 100% Acrylic Exterior Paint Of Approved Brand And Manufacture To Give An Even Shade With Two Or More Coats Including Prepartion Of Base With Sand Papering, Primer, Putty, Etc Complete In All Respect Including Scaffolding And Safety Provision New Work , Old Work , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meter Lead : For Thickness Of Tiles 10Mm To 25Mm. , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. 1: 3: 6 Or Richer Mix. , Providing And Fixing Aluminum Work For Doors ,Windows, Ventilators And Partition With Extruded Built Up Standard Tubular / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is :733 And Is :1285, Fixed With Rawl Plugs And Screws Or With Fixing Clips ,Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gap. At Junctions , At Top ,Bottom And Sides With Required Pvc/Neoprene Felt Etc. Aluminium Section Shall Be Smooth ,Rust Free, Straight ,Mitered And Jointed Mechanically Wherever Required Including Cleat Angle Aluminium Snap Beading For Glazing /Paneling , C.P. Brass/ Stainless Steel Screws Al. Tower Bolt & Al. Handle & Al. Aldrop Etc.,All Complete As Per Architectural Drawings And The Directions Of Engineer- In - Charge .(Glazing And Paneling To Be Paid For Separately). , For Fixed Portion Anodised Aluminum (Anodised Transparent 81 Dyed To Required Shade According To Is : 1868. (Minimum Anodic Coating Of Grade Ac 15, Anodizing To Be Got Done From Approved Anodizer) , For Shutters Builtup Standard Tubular Sections Of Openable Doors ,Windows & Ventilators Including Providing & Fixing Hinges / Rollers Etc. And Making Provision For Fixing Of Fittings Wherever Required (Lockes Shall Be Paid For Separately). Anodised Aluminum (Anodised Transparent 81 Dyed To Required Shade According To Is : 1868. (Minimum Anodic Coating Of Grade Ac 15, Anodizing To Be Got Done From Approved Anodizer) , Providing And Fixing Glazing In Aluminium Door, Window ,Ventilator Shutters And Partitions Etc. With Pvs/Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge. (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item.) With Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10.0 Kg/Sqm) As Per Is : 2835. , Providing And Fixing 12 Mm Thick Prelaminated Three Layer Medium Density (Exterior Grade ) Particle Board Grade I, Type Ii Conforming To Is : 12823 Bonded Formaldehyde Synthetic Resin ,Of Approved Brand And Manufacture In Paneling Fixed In Aluminium Doors ,Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Direction Of Engineer-In-Charge. Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side. , P & F Soap Dish Or Tray Of Approved Quality/Make C.P. Brass , P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall : Size 580 Mm X 450 Mm , P & F Wvc Wash Basin (Ist Quality Is:2556 Mark) Of Approved Make With C.I. Brackets Duly Painted 1 No. 15 Mm C.P. Pillar Cock (Is:8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make, P.V.C Waste Pipe With Pvc Nut 32 Mm Complete Including Cutting & Making Good The Wall : Size 630 Mm X 500 Mm Dia For Counter Top , P & F Inlet Connection (Angle Valves) Superior Quality, Of Approved Make, For Wash Basin, Gyser Etc. C.P. Inlet Connection 15Mm.Brass (Is : 8931 Marked) , P & F 15 Mm. Dia Connection Pipe Of Approved Quality/Make :450 Mm , P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia , P & F Kitchen & Lab. Sink Of Approved Make With C.I. Brackets Duly Painted, 40 Mm C.P. Waste Coupling, C.P. Brass Chain With Rubber Plug, 40 Mm G.I. Waste Pipe Up-To Floor Level Complete Including Cutting And Making Good The Wall & Floor : 1.0 Mm Thick Stainless Steel Aisi -304 & Is 13983-1994 Kitchen Sink Of Approved Make As Per Engineer-In-Charge With Large Waste Coupling. 45 X 20 X 8 20X16x8 (With Drain Board) , Construction Of Septic Tank In All Types Of Soil With 40 Cm .Thick Masonry In Cm 1:6, 15 Cm Thick cement concrete Bed Of 1:5:10, M-15 Grade cement concrete Floor & Reinforced Cement Concrete Slab Covering With M15 Grade cement concrete Floor, 50 Mm Thick Stone Slab Partition Walls, 20 Mm Thick Plaster In Cm 1:6 Finished With Neat Floating Cement, 4 Nos Stone Foot Rests Of Approved Design ,Two No. 450 Mm Dia Each Ferro Cement Cover With Frame, Earth Work Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr:- , Size 230 X110 X150 Cm.(For 20 Users) With 115 Mm Thick Reinforced Cement Concrete (M-20) Slab With Tor Steel Reinforcement 10Mm Φ @15 Cm C/C Bothways Including Shuttering Complete In All Respect. , Size 400 X140x150 Cm.(For 50 Users) With 115 Mm Thick Reinforced Cement Concrete (M-20) Slab With Tor Steel Reinforcement 10Mm Φ @15 Cm C/C Bothways Including Shuttering Complete In All Respect. , P & F Indian Type White Glazed Vitreous China 1St Quality W.C. Orissa Pan (Is :2556 Mark) With 100 Mm Vitreous China P Or S Trap Including Cutting And Making Good The Wall And Floor: Size 580X440mm. , P & F Grating Of Approved Quality/Make: Stainless Steel Sheet Size 125Mm Dia. Heavy Quality Of Approved Make , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1 Metre Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work Exposed On Wall) 20Mm Nominal Size , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,) , 20Mm Nominal Size , 25 Mm Nominal Size , 32Mm Nominal Size , P & F Bib Cock (Is : 8931 Mark), Superior Quality Of Approved Make: C.P. Brass Bib Cock,15Mm Nominal Bore. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes (Is 15778 : 2007 Code) Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings, This Included Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement , Trenching Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. (External Work). , 25 Mm Nominal Size , 32Mm Nominal Size , P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: , Coupler (Socket) , 110Mm Dia , Plain Tee , 110Mm Dia , Bend 87 .5 , 110Mm Dia , Pipe Clip , 110Mm Dia , Providing And Fixing Superior Quality Pvc Tank Cover Complete As Per Approved By Engineer In Charge , Above 500 Lt. Capacity , P & F Pvc Storage Tank Isi Marked (Is : 12701) Indicating The Bis License No), Of Approved Make With Cover, 25Mm Dia 1M Long G.I. Over-Flow Pipe & 25 Cm. Long Wash Out Pipe With Plug & Socket, Including Making Connection Etc., Complete Of Approved Design: , 1000 Ltr. , P & F European Type White Glazed Vitreous China 1St Quality Double Syphonic W.C (Is :2556 Mark) With P Or S Trap Including Cutting And Making Good The Wall And Floor , P & F Water Closet Seat Covers With Brass Hinges Complete : Solid Pvc (Is 2548 Marked) Grade-I White For Ewc. , P & F Low Level Flushing Cistern Of 10 Litres Capacity (Is : 2556 Mark) Of Approved Make With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball (Is: 1703 Mark) Complete Including Cutting And Making Good The Wall: Pvc With Pvc Bend As Per Is : 7231 . , Providing And Fixing Unplasticized Poly Vinyl Chloride (Upvc) Swr Pipes Type B For Sciland Waste Discharge System (Is:13592 : 1992 Marked) Of Approved Quality /Make 110 Mm Dia , Providing And Fixing Unplasticized Poly Vinyl Chloride (Upvc) Swr Pipes Fittings Type B For Sciland Waste Discharge System (Is:13592 : 1992 Marked) Of Approved Quality /Make 110Mm Dia , Coupler , Bend 87.5 Dg. , Bend 45 Dg. , Door Bend 87.5 Dg. , Single Tee , Vent Cowel
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 5
18.
Defence #11162658 Technical Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Of Any Thickness As In Roof Coverings Complete All As Specified And Directed. , Supply And Fix 0.63 Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugation Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts In Lieu Of Screws And Washers, In Roofs, Walls Etc. With Grade Of Zinc Coating 275 Gsm Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering Cladding To Wall, Fixed With Self Tapping Screws As Specified. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete In Floors N.Exc 15 Cm Thick In Ground Floor (Below Or Above Ground Level) And In Any Position All As Specified , M&L For Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Stone Aggragate As In Subbase 25 Mm Thick Complete All Specified And Directed By Engr In Charge. , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Skirting All As Specified. , M&L For Light Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , Material And Labour For 450X350x7mm Thick Glazed Ceramic Tiles Coloured Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Dado Of Bathroom, Toilet And Kitchen All As Specified. , Demolition Of Stone Slabs Or Tiles Of Any Description Or Thickness Laid Bedded And Pointed In Any Mortar In Floors, Aprons Etc , M&L 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Cooking Platforms In Cm 1:4 Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite All As Specified. , M&L For Screed Bed Or Bedding Layer Of Mortar 20Mm Thick In Cm 1:4 For Laying Floor Finishes Complete All As Specified And Directed. , Demolition Of Precast Cement Concrete Articles And Precast Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , M & L Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Using Plain Cement Concrete Type C-1, 1:3:6 (20Mm Graded Agg) And Setting In Cement Mortar 1:6 Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For. , M&L For Reinforced Cement Concrete Type B1 1:2:4 Using 20Mm Graded Aggragate In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Chajjas, Deck Slabs And In Shelves And The Like Complete All Specified And Directed , M&L Tmt Bars 10 Mm Dia., And Over Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips Qual Complete All Specified And Directed , M&L For Mils Steel Tmt Bars 05Mm Dia And Over, Upto And Including 10 Mm Dia In Stirrups, Spaces And Binders All As Specified And Directed.. , Use And Waste Of Flat Fair Finished Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work ; Not Exceeding 200Mm Thick (Horizontal Or Sloping) As Specified , Taking Down Cement Plaster On Brick, Concrete Block Wall Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And Directed. , M & L 10 Mm Thick Rendering In Cement Mortar 1:6 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , M & L For 15 Mm Thick Plaster In Cement Mortar 1:4 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Primer. Complete All As Specified And Directed. , Material And Labour Preparing Newly Plastered Wall Surfaces And Applying Two Coats Of Cement Base Paint On Wall Surfaces Over One Coat Of Alkali Resistant Primer Complete All As Specified And Directed. , Dismantling Of Wall And Ceiling Board Or Insulation Boards/Slabs/Blanckets/Any Thickness Including Cover Fillets Complete All As Specified And Directed. , S&F 6 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Wall Surfaces Complete All As Specified And Directed. , S&F 4 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Ceiling Surfaces Complete All As Specified And Directed. , M & L For 50 Mm Thick Ii Nd Class Hard Wood Clean Sawn Boarding With Butt Joints Fixed With Nails In Any Situation Complete All As Specified And Directed. , M & L For 2 Nd Class Hard Wood Plain Fillets, Square, Rectangular Or Triangular In Section,Wrought, Secured With Nails Or Brads, Sectional Area Exc 3 But N.Exc 6 Sq.Cm. Complete All As Specified And Directed. , M&L For Preparation Of New Wooden Surfaces Of Any Description, Not Other Wise Described, Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. , Supply And Fix 600Mmx600mmx4mm Thick ‘E Board Classic (Make-Everest Industries Ltd) As In False Ceiling Including Supply And Fixing Gi ‘Tee Grid Frame Work Made Of Special Section Of M.S Galvanized Sheet 0.30Mm Thick , Bottom Portion Painted With Cellular Nitro Painting, Warping The Suspending Wire Around The Existing Wooden/Steel Purlin /Rafter For Suspending Grid Frame Work Of Size 605Mmx605mm Suspended With 4 Mm Dia Gi Wire @ 1200Mm C/C On Main Tee And Fixed To T-Grid With The Help Of Level Clip Or As Per Manufacturer Direction. The Section Consisting Of Main Tee 37Mmx24mmx0.60Mm, Cross Runner Tee 37Mmx24mmx0.60Mm And Perimeter Angle Of 24Mmx24mmx0.50Mm Thick. Perimeter Angle To Be Fixed To Wall With Gi Screw Of 40Mm Long @ 450 Mm C/C Along The Perimeter Of Wall Including Applying Two Coats Of Distemper Oil Emulsion Complete All As Specified And Directed , M & F For Solid Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing Complete All As Specified And Directed. , S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Exceeding 1.50 Sqm But Not Exc 4 Sqm. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exceeding 1.50 Sqm , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed. , S&F 30Mm Flush Shutters, Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Side And Both Face Is Covered With Decorative Face Veneer With Lipping/Frame Tp Match All As Completed And Specified As Directed. , S & F 30Mm Thick 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass, Gauze Etc But Divided Into Squares, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20Mm Width Tuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Lain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed. , S&F Ms Window Guard Bars, Window Frames Etc Articles Confirming To Fe 410-0 Or Fe 310-0. , S & F 100Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S & F 75Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S& F Aluminium Anodised Barrel Tower Bolts 150Mm Long Of Extruded Section And Fixed , S& F Aluminium Anodised Barrel Tower Bolts 100Mm Long Of Extruded Section And Fixed , S & F 150Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F 100Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F Aluminium Alloy, Anodised, Sliding Door Bolts 300Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed , S&F In Repair Pre Coated Mild Steel Floor Door Stopper ,Tongue Anodized 140Mm Length Including Vulcanised Rubber Piece Complete All As Specified And Directed. , S&F In Repair Pvc Coated 25Mm Dia Mild Steel Chromium Plated Curtain Rod Of Medium Weight And Including Fixing Brackets, Finals And Decorative End Supports Etc Complete All As Directed , M&L For Power Coated Anodised Aluminium Frame For Doors, Windows, Ventilatores With One Or More Rebated Including Joiing Cleat For Fixing Etc Complete All As Specified And Direcyed , S & F Anodised Aluminium Window And Ventilator Shutters, Fixed Type Without Sash Barsaluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glzing Clips,Rubber Packing,Anodised Aluminium Snap Beading,Screws Etc And Power Coating Of Any Colour(Thickness Of Powder Coating Not Less Than 50 Micron.) Complete All As Specified. , M & L For 4.80 Mm Sheet Glass, Ordinary Quality And Glazing With Aluminium Clip And Beading In Square Exc 0.5 Sq. M In Each Panel Complete All As Specified And Directed. , S & F Gi Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm Etc All As Specified. , Hacking Out Old Broken Glass (Any Thickness, Size Quality Or Description) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones. , S&F Sheet Glass 3Mm Thick Ordinary Quality And Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , S&F 3Mm Thick Figured Glass, Pin Head Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , Dismatling Of Mild Steel Work Any Description , M&L For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Conforming To Fe 290 (Gde E-165) Complete All As Specified And Directed. , M & L For Preparation Of New Or Previously Untreated Steel Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer To Steel And Iron Surfaces Of Any Description Over 10 Cm In Width Or Girth Not Otherwise Described Including Preparation Of New Steel Surfaces Complete All As Specified And Directed. , Dismantling Of Ci Soil, Rain Water Pipes, Cast And Vent Pipes Of Any Dia, Any Pattern Including All Fittings. , S&F Pvc (Swr) Pipes Single Socketed 110Mm Dia In Any Length With Rubber Ring Joints Fixed To Walls , S&F In Rep Pvc (Swr) Bends Any Radius, Bend 110Mm Dia With Access Door , S&F Pvc (Swr) Pipes 75 Mm Bore Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches,Wall Or In Floors. , S&F In Repair Pvc Bends Any Radius 75Mm Bore , S&F In Rep Pvc (Swr) Floor Trap, 75Mm Dia Outlet, Plain With Grating Incl Jointing With Solvent Cement. , S&F In Repair Grating Doom 125Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair Grating Doom 100Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair 32Mm Pvc Waste Pipe For Kitchen Sink ,Whb Complete All As Specified And Directed. , S&F In Repair Pvc (Swr) Wc Connector 110Mm Dia Complete All As Specified And Directed. , S&F In Repair Vitreous China Squatting Pan Orissa Pattern Size 580 X440 Mm White With Integral Foot Rest Complete All As Specified And Directed. , S7f In Repairs 10 Ltrs Capacity Pvc Valveless Syphonic Action Type Flushing Cistern Low Level White With Inlet Ball Valve, Float, Chain And Pull And Brackets Etc Complete All As Specified And Directed. , S & F In Repair Pvc Connection 15Mm Dia 450 Mm Long With Brass Check Nuts And Washers Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Down Water Closet Pan Of Pedestal Pattern, White With P Or S Traps, Including Connecting To Trap And To Flushing Pipe Etc Complete All As Specified. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back Of Size 550Mmx400 Mm Including Cutting For And Pinning In End Of Brackets,32 Mm Waste Fittings,Brass Chromium Plated For Glazed Ware Sinks,Basins Etc.With Long Screwed Shanks And Fly Nuts Flange End Bedded In Red Lead Cement And Other End Fixed.And Flush Pipe Of Polytethylene Of Low Or High Density Or Pvc 32 Mm Dia Complete All As Specified And Directed. , S&F In Repair Sinks Made Of Stainless Steel With Drainage Board 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Drarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X160mm Complete All As Specified And Directed. , S&F Vitreous China Urinals, Bowl Type 465X355x265 Mm White, Providing & Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe Complete All As Specified And Directed. , S & F In Repair Plastic Water Closet Seat Cover, White Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And Directed. , S&F In Repair For Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S&F In Repairs Of Waste Fittings 32 Mm Dia, Brass, Cp For Glazed Ware Sink, Basins, Etc. With Long Screwed Shanks And Fly-Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed Complete All As Specified And Directed. , S&F In Repair Cp Towel Ring Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 90 Gms) , S&F In Repair Soap Dish, Any Type, Fiexd To Plugs With Chromium Plated Brass Screws , S&F Cp Towel Rail 600Mm Long Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 190 Gms) , S & F In Repair Looking Mirror 600 Mm X 450 Mm Bevelled Edge Mirror Or Selected Quality Glass, Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed. , Dismantling Of Water Tanks Exc 250 Ltrs & N. Exc 500 Ltrs Capacity And Removing To Store. , Dismantling Of Water Tanks Exc 500 Ltrs & N. Exc1000 Ltrs Capacity And Removing To Store. , S&F Pvc Water Storage Tanks Of 500 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S&F Pvc Water Storage Tanks Of 1000 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S & F In Repairs Fancy Type 15Mm Dia Bib Tap, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specifed. , S & F In Repair 20Mm Ball Brass Valves, High Pressure, With Polyethene Float And Flynut Complete Screwed For Iron Pipe Of 20Mm Dia All As Specified. , S&F In Repair 20Mm Gun Metal Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For 20 Mm Dia Of Pipe And Fixed Complete All As Specified And Directed. , S & F In Repair Chromium Plated 15Mm Dia Stop Cock Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified , Supply And Fix In Rep 15Mm Pillar Taps , Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. , S&F In Repair 15Mm Brass Cp Mixer For Mixing Hot And Cold Water (Wall Mixer) Screwed Down For Iron Pipe Andd Fixed In Repairs For Bath Shower And Kichen Sink With Complete All As Specified And Directed. , S&F In Repair 15 Mm Brass Cp Basin Mixer Unit With All Fittings Required Complete All As Specified And Directed. , S& F In Repair Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And Directed. , S& F In Repair Chromium Plated Shower Roses With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Clfor Refixing Or Removal To Store , S&F 15Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches Complete All As Specified And Directed. , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning Or Refixing Or Removal To Store , S&F 20 Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 20 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 16 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , M & L For 100 Mm Thick Cement Concrete Type D- 2,1:4:8 (40Mm Graded Aggregate) As In Sub Base Complete All As Specified And Directed. , M & L Providing And Laying 60Mm Thick Factorymade Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour,Design & Pattern As In Footparth, Parks,Lawns, Drive Ways Or Light Traffic Parking Etc.,Of Required Strength, Thickness & Size/Shape, Made By Table Vibratory Method Usingpu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compactedbed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paverblocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Sizeand Pattern, Finishing And Sweeping Extra Sand Complete All As Specified . , M&L Chequered Cement Concrete Tiles 20Cmx20cmx25mm Thick With Grey Cement And Pigment, Set Jointed And Pointed In Neat Cement Slurry In Floors Completed All As Specified And Directed By Engr-In-Charge. , Disconnecting Existing Water Tanks Of Capacity Exc 250 Ltrs But N Exc 500 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed. , Disconnecting Existing Water Tanks Of Capacity Exc 500 Ltrs But N Exc 1000 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Arunachal Pradesh View Result →
19.
Defence #11162657 Technical Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Of Any Thickness As In Roof Coverings Complete All As Specified And Directed. , Supply And Fix 0.63 Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugation Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts In Lieu Of Screws And Washers, In Roofs, Walls Etc. With Grade Of Zinc Coating 275 Gsm Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering Cladding To Wall, Fixed With Self Tapping Screws As Specified. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete In Floors N.Exc 15 Cm Thick In Ground Floor (Below Or Above Ground Level) And In Any Position All As Specified , M&L For Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Stone Aggragate As In Subbase 25 Mm Thick Complete All Specified And Directed By Engr In Charge. , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Skirting All As Specified. , M&L For Light Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , Material And Labour For 450X350x7mm Thick Glazed Ceramic Tiles Coloured Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Dado Of Bathroom, Toilet And Kitchen All As Specified. , Demolition Of Stone Slabs Or Tiles Of Any Description Or Thickness Laid Bedded And Pointed In Any Mortar In Floors, Aprons Etc , M&L 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Cooking Platforms In Cm 1:4 Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite All As Specified. , M&L For Screed Bed Or Bedding Layer Of Mortar 20Mm Thick In Cm 1:4 For Laying Floor Finishes Complete All As Specified And Directed. , Demolition Of Precast Cement Concrete Articles And Precast Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , M & L Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Using Plain Cement Concrete Type C-1, 1:3:6 (20Mm Graded Agg) And Setting In Cement Mortar 1:6 Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For. , M&L For Reinforced Cement Concrete Type B1 1:2:4 Using 20Mm Graded Aggragate In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Chajjas, Deck Slabs And In Shelves And The Like Complete All Specified And Directed , M&L Tmt Bars 10 Mm Dia., And Over Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips Qual Complete All Specified And Directed , M&L For Mils Steel Tmt Bars 05Mm Dia And Over, Upto And Including 10 Mm Dia In Stirrups, Spaces And Binders All As Specified And Directed.. , Use And Waste Of Flat Fair Finished Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work ; Not Exceeding 200Mm Thick (Horizontal Or Sloping) As Specified , Taking Down Cement Plaster On Brick, Concrete Block Wall Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And Directed. , M & L 10 Mm Thick Rendering In Cement Mortar 1:6 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , M & L For 15 Mm Thick Plaster In Cement Mortar 1:4 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Primer. Complete All As Specified And Directed. , Material And Labour Preparing Newly Plastered Wall Surfaces And Applying Two Coats Of Cement Base Paint On Wall Surfaces Over One Coat Of Alkali Resistant Primer Complete All As Specified And Directed. , Dismantling Of Wall And Ceiling Board Or Insulation Boards/Slabs/Blanckets/Any Thickness Including Cover Fillets Complete All As Specified And Directed. , S&F 6 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Wall Surfaces Complete All As Specified And Directed. , S&F 4 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Ceiling Surfaces Complete All As Specified And Directed. , M & L For 50 Mm Thick Ii Nd Class Hard Wood Clean Sawn Boarding With Butt Joints Fixed With Nails In Any Situation Complete All As Specified And Directed. , M & L For 2 Nd Class Hard Wood Plain Fillets, Square, Rectangular Or Triangular In Section,Wrought, Secured With Nails Or Brads, Sectional Area Exc 3 But N.Exc 6 Sq.Cm. Complete All As Specified And Directed. , M&L For Preparation Of New Wooden Surfaces Of Any Description, Not Other Wise Described, Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. , Supply And Fix 600Mmx600mmx4mm Thick ‘E Board Classic (Make-Everest Industries Ltd) As In False Ceiling Including Supply And Fixing Gi ‘Tee Grid Frame Work Made Of Special Section Of M.S Galvanized Sheet 0.30Mm Thick , Bottom Portion Painted With Cellular Nitro Painting, Warping The Suspending Wire Around The Existing Wooden/Steel Purlin /Rafter For Suspending Grid Frame Work Of Size 605Mmx605mm Suspended With 4 Mm Dia Gi Wire @ 1200Mm C/C On Main Tee And Fixed To T-Grid With The Help Of Level Clip Or As Per Manufacturer Direction. The Section Consisting Of Main Tee 37Mmx24mmx0.60Mm, Cross Runner Tee 37Mmx24mmx0.60Mm And Perimeter Angle Of 24Mmx24mmx0.50Mm Thick. Perimeter Angle To Be Fixed To Wall With Gi Screw Of 40Mm Long @ 450 Mm C/C Along The Perimeter Of Wall Including Applying Two Coats Of Distemper Oil Emulsion Complete All As Specified And Directed , M & F For Solid Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing Complete All As Specified And Directed. , S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Exceeding 1.50 Sqm But Not Exc 4 Sqm. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exceeding 1.50 Sqm , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed. , S&F 30Mm Flush Shutters, Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Side And Both Face Is Covered With Decorative Face Veneer With Lipping/Frame Tp Match All As Completed And Specified As Directed. , S & F 30Mm Thick 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass, Gauze Etc But Divided Into Squares, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20Mm Width Tuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Lain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed. , S&F Ms Window Guard Bars, Window Frames Etc Articles Confirming To Fe 410-0 Or Fe 310-0. , S & F 100Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S & F 75Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S& F Aluminium Anodised Barrel Tower Bolts 150Mm Long Of Extruded Section And Fixed , S& F Aluminium Anodised Barrel Tower Bolts 100Mm Long Of Extruded Section And Fixed , S & F 150Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F 100Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F Aluminium Alloy, Anodised, Sliding Door Bolts 300Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed , S&F In Repair Pre Coated Mild Steel Floor Door Stopper ,Tongue Anodized 140Mm Length Including Vulcanised Rubber Piece Complete All As Specified And Directed. , S&F In Repair Pvc Coated 25Mm Dia Mild Steel Chromium Plated Curtain Rod Of Medium Weight And Including Fixing Brackets, Finals And Decorative End Supports Etc Complete All As Directed , M&L For Power Coated Anodised Aluminium Frame For Doors, Windows, Ventilatores With One Or More Rebated Including Joiing Cleat For Fixing Etc Complete All As Specified And Direcyed , S & F Anodised Aluminium Window And Ventilator Shutters, Fixed Type Without Sash Barsaluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glzing Clips,Rubber Packing,Anodised Aluminium Snap Beading,Screws Etc And Power Coating Of Any Colour(Thickness Of Powder Coating Not Less Than 50 Micron.) Complete All As Specified. , M & L For 4.80 Mm Sheet Glass, Ordinary Quality And Glazing With Aluminium Clip And Beading In Square Exc 0.5 Sq. M In Each Panel Complete All As Specified And Directed. , S & F Gi Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm Etc All As Specified. , Hacking Out Old Broken Glass (Any Thickness, Size Quality Or Description) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones. , S&F Sheet Glass 3Mm Thick Ordinary Quality And Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , S&F 3Mm Thick Figured Glass, Pin Head Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , Dismatling Of Mild Steel Work Any Description , M&L For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Conforming To Fe 290 (Gde E-165) Complete All As Specified And Directed. , M & L For Preparation Of New Or Previously Untreated Steel Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer To Steel And Iron Surfaces Of Any Description Over 10 Cm In Width Or Girth Not Otherwise Described Including Preparation Of New Steel Surfaces Complete All As Specified And Directed. , Dismantling Of Ci Soil, Rain Water Pipes, Cast And Vent Pipes Of Any Dia, Any Pattern Including All Fittings. , S&F Pvc (Swr) Pipes Single Socketed 110Mm Dia In Any Length With Rubber Ring Joints Fixed To Walls , S&F In Rep Pvc (Swr) Bends Any Radius, Bend 110Mm Dia With Access Door , S&F Pvc (Swr) Pipes 75 Mm Bore Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches,Wall Or In Floors. , S&F In Repair Pvc Bends Any Radius 75Mm Bore , S&F In Rep Pvc (Swr) Floor Trap, 75Mm Dia Outlet, Plain With Grating Incl Jointing With Solvent Cement. , S&F In Repair Grating Doom 125Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair Grating Doom 100Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair 32Mm Pvc Waste Pipe For Kitchen Sink ,Whb Complete All As Specified And Directed. , S&F In Repair Pvc (Swr) Wc Connector 110Mm Dia Complete All As Specified And Directed. , S&F In Repair Vitreous China Squatting Pan Orissa Pattern Size 580 X440 Mm White With Integral Foot Rest Complete All As Specified And Directed. , S7f In Repairs 10 Ltrs Capacity Pvc Valveless Syphonic Action Type Flushing Cistern Low Level White With Inlet Ball Valve, Float, Chain And Pull And Brackets Etc Complete All As Specified And Directed. , S & F In Repair Pvc Connection 15Mm Dia 450 Mm Long With Brass Check Nuts And Washers Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Down Water Closet Pan Of Pedestal Pattern, White With P Or S Traps, Including Connecting To Trap And To Flushing Pipe Etc Complete All As Specified. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back Of Size 550Mmx400 Mm Including Cutting For And Pinning In End Of Brackets,32 Mm Waste Fittings,Brass Chromium Plated For Glazed Ware Sinks,Basins Etc.With Long Screwed Shanks And Fly Nuts Flange End Bedded In Red Lead Cement And Other End Fixed.And Flush Pipe Of Polytethylene Of Low Or High Density Or Pvc 32 Mm Dia Complete All As Specified And Directed. , S&F In Repair Sinks Made Of Stainless Steel With Drainage Board 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Drarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X160mm Complete All As Specified And Directed. , S&F Vitreous China Urinals, Bowl Type 465X355x265 Mm White, Providing & Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe Complete All As Specified And Directed. , S & F In Repair Plastic Water Closet Seat Cover, White Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And Directed. , S&F In Repair For Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S&F In Repairs Of Waste Fittings 32 Mm Dia, Brass, Cp For Glazed Ware Sink, Basins, Etc. With Long Screwed Shanks And Fly-Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed Complete All As Specified And Directed. , S&F In Repair Cp Towel Ring Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 90 Gms) , S&F In Repair Soap Dish, Any Type, Fiexd To Plugs With Chromium Plated Brass Screws , S&F Cp Towel Rail 600Mm Long Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 190 Gms) , S & F In Repair Looking Mirror 600 Mm X 450 Mm Bevelled Edge Mirror Or Selected Quality Glass, Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed. , Dismantling Of Water Tanks Exc 250 Ltrs & N. Exc 500 Ltrs Capacity And Removing To Store. , Dismantling Of Water Tanks Exc 500 Ltrs & N. Exc1000 Ltrs Capacity And Removing To Store. , S&F Pvc Water Storage Tanks Of 500 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S&F Pvc Water Storage Tanks Of 1000 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S & F In Repairs Fancy Type 15Mm Dia Bib Tap, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specifed. , S & F In Repair 20Mm Ball Brass Valves, High Pressure, With Polyethene Float And Flynut Complete Screwed For Iron Pipe Of 20Mm Dia All As Specified. , S&F In Repair 20Mm Gun Metal Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For 20 Mm Dia Of Pipe And Fixed Complete All As Specified And Directed. , S & F In Repair Chromium Plated 15Mm Dia Stop Cock Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified , Supply And Fix In Rep 15Mm Pillar Taps , Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. , S&F In Repair 15Mm Brass Cp Mixer For Mixing Hot And Cold Water (Wall Mixer) Screwed Down For Iron Pipe Andd Fixed In Repairs For Bath Shower And Kichen Sink With Complete All As Specified And Directed. , S&F In Repair 15 Mm Brass Cp Basin Mixer Unit With All Fittings Required Complete All As Specified And Directed. , S& F In Repair Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And Directed. , S& F In Repair Chromium Plated Shower Roses With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Clfor Refixing Or Removal To Store , S&F 15Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches Complete All As Specified And Directed. , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning Or Refixing Or Removal To Store , S&F 20 Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 20 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 16 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , M & L For 100 Mm Thick Cement Concrete Type D- 2,1:4:8 (40Mm Graded Aggregate) As In Sub Base Complete All As Specified And Directed. , M & L Providing And Laying 60Mm Thick Factorymade Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour,Design & Pattern As In Footparth, Parks,Lawns, Drive Ways Or Light Traffic Parking Etc.,Of Required Strength, Thickness & Size/Shape, Made By Table Vibratory Method Usingpu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compactedbed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paverblocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Sizeand Pattern, Finishing And Sweeping Extra Sand Complete All As Specified . , M&L Chequered Cement Concrete Tiles 20Cmx20cmx25mm Thick With Grey Cement And Pigment, Set Jointed And Pointed In Neat Cement Slurry In Floors Completed All As Specified And Directed By Engr-In-Charge. , Disconnecting Existing Water Tanks Of Capacity Exc 250 Ltrs But N Exc 500 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed. , Disconnecting Existing Water Tanks Of Capacity Exc 500 Ltrs But N Exc 1000 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
Arunachal Pradesh View Result →
20.
Defence #11162656 AOC
Tender for Dismantling Plain Or Corrugated Steel Sheeting Of Any Thickness As In Roof Coverings Complete All As Specified And Directed. , Supply And Fix 0.63 Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugation Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts In Lieu Of Screws And Washers, In Roofs, Walls Etc. With Grade Of Zinc Coating 275 Gsm Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering Cladding To Wall, Fixed With Self Tapping Screws As Specified. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And Directed. , Demolition Of Cement Concrete In Floors N.Exc 15 Cm Thick In Ground Floor (Below Or Above Ground Level) And In Any Position All As Specified , M&L For Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Stone Aggragate As In Subbase 25 Mm Thick Complete All Specified And Directed By Engr In Charge. , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Skirting All As Specified. , M&L For Light Shade Virified Ceramic Tiles 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , Material And Labour For 450X350x7mm Thick Glazed Ceramic Tiles Coloured Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Dado Of Bathroom, Toilet And Kitchen All As Specified. , Demolition Of Stone Slabs Or Tiles Of Any Description Or Thickness Laid Bedded And Pointed In Any Mortar In Floors, Aprons Etc , M&L 20 Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Cooking Platforms In Cm 1:4 Including Pointing In White Cement 1:2 Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite All As Specified. , M&L For Screed Bed Or Bedding Layer Of Mortar 20Mm Thick In Cm 1:4 For Laying Floor Finishes Complete All As Specified And Directed. , Demolition Of Precast Cement Concrete Articles And Precast Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , M & L Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Using Plain Cement Concrete Type C-1, 1:3:6 (20Mm Graded Agg) And Setting In Cement Mortar 1:6 Complete All As Specified And Directed. , Demolition Of Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For. , M&L For Reinforced Cement Concrete Type B1 1:2:4 Using 20Mm Graded Aggragate In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Chajjas, Deck Slabs And In Shelves And The Like Complete All Specified And Directed , M&L Tmt Bars 10 Mm Dia., And Over Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9 Mm Dia., Or Securing With Clips Qual Complete All Specified And Directed , M&L For Mils Steel Tmt Bars 05Mm Dia And Over, Upto And Including 10 Mm Dia In Stirrups, Spaces And Binders All As Specified And Directed.. , Use And Waste Of Flat Fair Finished Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work ; Not Exceeding 200Mm Thick (Horizontal Or Sloping) As Specified , Taking Down Cement Plaster On Brick, Concrete Block Wall Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And Directed. , M & L 10 Mm Thick Rendering In Cement Mortar 1:6 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , M & L For 15 Mm Thick Plaster In Cement Mortar 1:4 On Brick Or Concrete Surfaces Finished Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. , Material And Labour For Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Primer. Complete All As Specified And Directed. , Material And Labour Preparing Newly Plastered Wall Surfaces And Applying Two Coats Of Cement Base Paint On Wall Surfaces Over One Coat Of Alkali Resistant Primer Complete All As Specified And Directed. , Dismantling Of Wall And Ceiling Board Or Insulation Boards/Slabs/Blanckets/Any Thickness Including Cover Fillets Complete All As Specified And Directed. , S&F 6 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Wall Surfaces Complete All As Specified And Directed. , S&F 4 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Ceiling Surfaces Complete All As Specified And Directed. , M & L For 50 Mm Thick Ii Nd Class Hard Wood Clean Sawn Boarding With Butt Joints Fixed With Nails In Any Situation Complete All As Specified And Directed. , M & L For 2 Nd Class Hard Wood Plain Fillets, Square, Rectangular Or Triangular In Section,Wrought, Secured With Nails Or Brads, Sectional Area Exc 3 But N.Exc 6 Sq.Cm. Complete All As Specified And Directed. , M&L For Preparation Of New Wooden Surfaces Of Any Description, Not Other Wise Described, Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. , Supply And Fix 600Mmx600mmx4mm Thick ‘E Board Classic (Make-Everest Industries Ltd) As In False Ceiling Including Supply And Fixing Gi ‘Tee Grid Frame Work Made Of Special Section Of M.S Galvanized Sheet 0.30Mm Thick , Bottom Portion Painted With Cellular Nitro Painting, Warping The Suspending Wire Around The Existing Wooden/Steel Purlin /Rafter For Suspending Grid Frame Work Of Size 605Mmx605mm Suspended With 4 Mm Dia Gi Wire @ 1200Mm C/C On Main Tee And Fixed To T-Grid With The Help Of Level Clip Or As Per Manufacturer Direction. The Section Consisting Of Main Tee 37Mmx24mmx0.60Mm, Cross Runner Tee 37Mmx24mmx0.60Mm And Perimeter Angle Of 24Mmx24mmx0.50Mm Thick. Perimeter Angle To Be Fixed To Wall With Gi Screw Of 40Mm Long @ 450 Mm C/C Along The Perimeter Of Wall Including Applying Two Coats Of Distemper Oil Emulsion Complete All As Specified And Directed , M & F For Solid Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing Complete All As Specified And Directed. , S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Exceeding 1.50 Sqm But Not Exc 4 Sqm. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exceeding 1.50 Sqm , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed. , S&F 30Mm Flush Shutters, Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Side And Both Face Is Covered With Decorative Face Veneer With Lipping/Frame Tp Match All As Completed And Specified As Directed. , S & F 30Mm Thick 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass, Gauze Etc But Divided Into Squares, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20Mm Width Tuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Lain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing Complete All As Specified And Directed. , S&F Ms Window Guard Bars, Window Frames Etc Articles Confirming To Fe 410-0 Or Fe 310-0. , S & F 100Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S & F 75Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S& F Aluminium Anodised Barrel Tower Bolts 150Mm Long Of Extruded Section And Fixed , S& F Aluminium Anodised Barrel Tower Bolts 100Mm Long Of Extruded Section And Fixed , S & F 150Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F 100Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F Aluminium Alloy, Anodised, Sliding Door Bolts 300Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed , S&F In Repair Pre Coated Mild Steel Floor Door Stopper ,Tongue Anodized 140Mm Length Including Vulcanised Rubber Piece Complete All As Specified And Directed. , S&F In Repair Pvc Coated 25Mm Dia Mild Steel Chromium Plated Curtain Rod Of Medium Weight And Including Fixing Brackets, Finals And Decorative End Supports Etc Complete All As Directed , M&L For Power Coated Anodised Aluminium Frame For Doors, Windows, Ventilatores With One Or More Rebated Including Joiing Cleat For Fixing Etc Complete All As Specified And Direcyed , S & F Anodised Aluminium Window And Ventilator Shutters, Fixed Type Without Sash Barsaluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glzing Clips,Rubber Packing,Anodised Aluminium Snap Beading,Screws Etc And Power Coating Of Any Colour(Thickness Of Powder Coating Not Less Than 50 Micron.) Complete All As Specified. , M & L For 4.80 Mm Sheet Glass, Ordinary Quality And Glazing With Aluminium Clip And Beading In Square Exc 0.5 Sq. M In Each Panel Complete All As Specified And Directed. , S & F Gi Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm Etc All As Specified. , Hacking Out Old Broken Glass (Any Thickness, Size Quality Or Description) From Metal Frame Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones. , S&F Sheet Glass 3Mm Thick Ordinary Quality And Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , S&F 3Mm Thick Figured Glass, Pin Head Glazing With Oil Putty In Squares N Exc 0.50 Sqm In Each Panel Complete All As Specified And Directed. , Dismatling Of Mild Steel Work Any Description , M&L For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Conforming To Fe 290 (Gde E-165) Complete All As Specified And Directed. , M & L For Preparation Of New Or Previously Untreated Steel Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer To Steel And Iron Surfaces Of Any Description Over 10 Cm In Width Or Girth Not Otherwise Described Including Preparation Of New Steel Surfaces Complete All As Specified And Directed. , Dismantling Of Ci Soil, Rain Water Pipes, Cast And Vent Pipes Of Any Dia, Any Pattern Including All Fittings. , S&F Pvc (Swr) Pipes Single Socketed 110Mm Dia In Any Length With Rubber Ring Joints Fixed To Walls , S&F In Rep Pvc (Swr) Bends Any Radius, Bend 110Mm Dia With Access Door , S&F Pvc (Swr) Pipes 75 Mm Bore Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches,Wall Or In Floors. , S&F In Repair Pvc Bends Any Radius 75Mm Bore , S&F In Rep Pvc (Swr) Floor Trap, 75Mm Dia Outlet, Plain With Grating Incl Jointing With Solvent Cement. , S&F In Repair Grating Doom 125Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair Grating Doom 100Mm Dia With And Without Wast Hole Ptmt (Minimum Weight 40 Grms) , S&F In Repair 32Mm Pvc Waste Pipe For Kitchen Sink ,Whb Complete All As Specified And Directed. , S&F In Repair Pvc (Swr) Wc Connector 110Mm Dia Complete All As Specified And Directed. , S&F In Repair Vitreous China Squatting Pan Orissa Pattern Size 580 X440 Mm White With Integral Foot Rest Complete All As Specified And Directed. , S7f In Repairs 10 Ltrs Capacity Pvc Valveless Syphonic Action Type Flushing Cistern Low Level White With Inlet Ball Valve, Float, Chain And Pull And Brackets Etc Complete All As Specified And Directed. , S & F In Repair Pvc Connection 15Mm Dia 450 Mm Long With Brass Check Nuts And Washers Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Down Water Closet Pan Of Pedestal Pattern, White With P Or S Traps, Including Connecting To Trap And To Flushing Pipe Etc Complete All As Specified. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back Of Size 550Mmx400 Mm Including Cutting For And Pinning In End Of Brackets,32 Mm Waste Fittings,Brass Chromium Plated For Glazed Ware Sinks,Basins Etc.With Long Screwed Shanks And Fly Nuts Flange End Bedded In Red Lead Cement And Other End Fixed.And Flush Pipe Of Polytethylene Of Low Or High Density Or Pvc 32 Mm Dia Complete All As Specified And Directed. , S&F In Repair Sinks Made Of Stainless Steel With Drainage Board 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar On To Drarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe, Overall Size 495Mm X 420Mm Bowl Size 410Mm X 330Mm X160mm Complete All As Specified And Directed. , S&F Vitreous China Urinals, Bowl Type 465X355x265 Mm White, Providing & Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement; Fixing Automatic Flushing Cistern With Brackets, Flush Pipe, Grating And Union For Discharge Pipe Complete All As Specified And Directed. , S & F In Repair Plastic Water Closet Seat Cover, White Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And Directed. , S&F In Repair For Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S&F In Repairs Of Waste Fittings 32 Mm Dia, Brass, Cp For Glazed Ware Sink, Basins, Etc. With Long Screwed Shanks And Fly-Nuts, Flange End Bedded In Red Lead Cement And Other End Fixed Complete All As Specified And Directed. , S&F In Repair Cp Towel Ring Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 90 Gms) , S&F In Repair Soap Dish, Any Type, Fiexd To Plugs With Chromium Plated Brass Screws , S&F Cp Towel Rail 600Mm Long Of Ptmt Fixed With Chromium Plated Brass Screws (Min Wt 190 Gms) , S & F In Repair Looking Mirror 600 Mm X 450 Mm Bevelled Edge Mirror Or Selected Quality Glass, Mounted On 6 Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed. , Dismantling Of Water Tanks Exc 250 Ltrs & N. Exc 500 Ltrs Capacity And Removing To Store. , Dismantling Of Water Tanks Exc 500 Ltrs & N. Exc1000 Ltrs Capacity And Removing To Store. , S&F Pvc Water Storage Tanks Of 500 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S&F Pvc Water Storage Tanks Of 1000 Ltrs Capacity Rotational Moulded (Multi Layered Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified And Directed. , S & F In Repairs Fancy Type 15Mm Dia Bib Tap, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specifed. , S & F In Repair 20Mm Ball Brass Valves, High Pressure, With Polyethene Float And Flynut Complete Screwed For Iron Pipe Of 20Mm Dia All As Specified. , S&F In Repair 20Mm Gun Metal Globe Or Gate Valve With Iron Wheel Head, Screwed Both Ends For 20 Mm Dia Of Pipe And Fixed Complete All As Specified And Directed. , S & F In Repair Chromium Plated 15Mm Dia Stop Cock Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down For Iron Pipe Or For Brass Ferrule Complete All As Specified , Supply And Fix In Rep 15Mm Pillar Taps , Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. , S&F In Repair 15Mm Brass Cp Mixer For Mixing Hot And Cold Water (Wall Mixer) Screwed Down For Iron Pipe Andd Fixed In Repairs For Bath Shower And Kichen Sink With Complete All As Specified And Directed. , S&F In Repair 15 Mm Brass Cp Basin Mixer Unit With All Fittings Required Complete All As Specified And Directed. , S& F In Repair Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And Directed. , S& F In Repair Chromium Plated Shower Roses With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Bore Steel Water Tubing And Connections Including Clfor Refixing Or Removal To Store , S&F 15Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches Complete All As Specified And Directed. , Taking Up Or Down 20 Mm Bore Steel Water Tubing And Connections Including Cleaning Or Refixing Or Removal To Store , S&F 20 Mm Bore Steel Water Tubes, Medium Grade, Galvanised With All Fittings And Fixed Complete To Walls/Ceilings Or Laid In Trenches. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 20 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , Supply & Fixing In Repair 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Of 16 Mm Outer Dia Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. With All Fittings And Fixed Complete To Wall And Ceiling Or Laid In Floors And Making Connection With Old Gi Tube/Ppr Pipe Using Suitable Section Complete Leakproof All As Specified And As Directed. , M & L For 100 Mm Thick Cement Concrete Type D- 2,1:4:8 (40Mm Graded Aggregate) As In Sub Base Complete All As Specified And Directed. , M & L Providing And Laying 60Mm Thick Factorymade Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour,Design & Pattern As In Footparth, Parks,Lawns, Drive Ways Or Light Traffic Parking Etc.,Of Required Strength, Thickness & Size/Shape, Made By Table Vibratory Method Usingpu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compactedbed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paverblocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Sizeand Pattern, Finishing And Sweeping Extra Sand Complete All As Specified . , M&L Chequered Cement Concrete Tiles 20Cmx20cmx25mm Thick With Grey Cement And Pigment, Set Jointed And Pointed In Neat Cement Slurry In Floors Completed All As Specified And Directed By Engr-In-Charge. , Disconnecting Existing Water Tanks Of Capacity Exc 250 Ltrs But N Exc 500 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed. , Disconnecting Existing Water Tanks Of Capacity Exc 500 Ltrs But N Exc 1000 Ltrs, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required Reconnecting And Re-Fixing In Position Incl Cleaning And Removing All Scale And Dirt Etc, From Tanks And From Mouths Of Circulating Pipes Etc Complete All As Specified And Directed.
Contract Date: Jul 02, 2026 Contract Value : 41.50 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Arunachal Pradesh View Result →
21.
Defence #11162653 Technical Bid
Tender for M&L Sunken Treatment Of Toilet/Bathroom( Including Demolition) As In Following Steps: I) Top Of Reinforced Cement Concrete Slab In Sunken Portion Including Peripheral Beams Shall Be Plastered With 15Mm Thick In Cement Mortar 1 : 3 Using Approved Water Proofing Compound @ 3% By Weight Of Cement Finished Even And Smooth Using Extra Cement, Curved At The Junctions. Ii) Apply Two Coats Of Epoxy Resin/Polymer Modified Cementations Coating Like Brush Bond Of Fosrok/Sika/Pedilite Or Equivalent, Both On Floor & Beams. Iii) Sunken Slabs To Be Given 1:20 Slope Outward 25Mm Gi Pipe Spout With 300 Mm Projection Beyond Outer Surface Of Wall Shall Be Provided. Iv) Water Tightness Of Sunken Portion To Be Tested By Ponding With Water For 72 Hours. In Case Of Even A Slight Mark Of Seepage, The Portion To Be Treated And Ponding Shall Be Carried Out Again To Confirm The Water Tightness Of Sunken Slab. V) The Sunken Portion Will Be Filled With Lean Concrete 1:4:8 Type D2 Using Brick Aggregates To Required Depth. Note : No Cutting In Roof Slab/Beam Shall Be Allowed For Passing Of Ci Pipes & Fittings.The Stage Of Water Proofing To Sunken Slab Shall Be Passed By Eng-In-Charge/Ge. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles And Rubbish Off The Premises Complete All As Specified And Directed , Demolition Of Cement Concrete In Floors N.Exc 15 Cm Thick In Ground Floor (Below Or Above Ground Level) And In Any Position All As Specified , M&L For Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Stone Aggragate As In Subbase 40 Mm Thick Complete All Specified And Directed By Engr In Charge Complete All As Specified And Directed , M&L For Virified Ceramic Tiles Light Shade 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Virified Ceramic Tiles Light Shade 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Skirting All As Specified. , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Of Cm 1:4 Complete All As Specified And Directed , M&L For Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Skirting All As Specified. , Material And Labour For 450X350x7mm Thick Glazed Ceramic Tiles Coloured Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement Over And Including 10Mm Thick Rendering With Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces As In Dado Of Bathroom, Toilet And Kitchen All As Specified. , Dismantling Of Wall And Ceiling Board Or Insulation Boards/Slabs/Blanckets/Any Thickness Including Cover Fillets Complete All As Specified And Directed , S&F 6 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Wall Surfaces Complete All As Specified And Directed , S&F 4 Mm Thick Ply Wood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work On Ceiling Surfaces Complete All As Specified And Directed , M & L For 50 Mm Thick Ii Nd Class Hard Wood Clean Sawn Boarding With Butt Joints Fixed With Nails In Any Situation Complete All As Specified And Directed , M & L For 2 Nd Class Hard Wood Plain Fillets, Square, Rectangular Or Triangular In Section,Wrought, Secured With Nails Or Brads, Sectional Area Exc 3 But N.Exc 6 Sq.Cm Complete All As Specified And Directed , M&L For Preparation Of New Wooden Surfaces Of Any Description, Not Other Wise Described, Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed , Supply And Fix 600Mmx600mmx4mm Thick ‘E Board Classic (Make-Everest Industries Ltd) As In False Ceiling Including Supply And Fixing Gi ‘Tee Grid Frame Work Made Of Special Section Of M.S Galvanized Sheet 0.30Mm Thick , Bottom Portion Painted With Cellular Nitro Painting, Warping The Suspending Wire Around The Existing Wooden/Steel Purlin /Rafter For Suspending Grid Frame Work Of Size 605Mmx605mm Suspended With 4 Mm Dia Gi Wire @ 1200Mm C/C On Main Tee And Fixed To T-Grid With The Help Of Level Clip Or As Per Manufacturer Direction. The Section Consisting Of Main Tee 37Mmx24mmx0.60Mm, Cross Runner Tee 37Mmx24mmx0.60Mm And Perimeter Angle Of 24Mmx24mmx0.50Mm Thick. Perimeter Angle To Be Fixed To Wall With Gi Screw Of 40Mm Long @ 450 Mm C/C Along The Perimeter Of Wall Including Applying Two Coats Of Distemper Oil Emulsion Complete All As Specified And Directed , M&L For Gl Frame Work For Seamless Ceiling Comprising Of Gl Perimeter Channnel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30 Mm And Web Of 27 Mm Fixed To Surrounding Wall Using Nylon Sleeves And Screws At 450 Mm Centre To Centre/Intermediate Channel 0.9 Mm Thick Having Two Equal Flanges Of 15 Mm Each And Web Of 45 Mm Suspended From Soffit At Approx 900 Mm Centre To Centre With Gl Cleat And Steel Expansion Fasteners With And Including Ceiling Section (Not Exc 1.2 M Length) Of 0.55 Mm Thickness Having Kurled Web Of 50 Mm And Flange Of 26 Mm Each With Lips Of 10.5 Mm Fixed To The Intermediate Channel With Connecting Clips Across The Intermediate Channel At 457 Mm Centre To Centre Complete All As Specified And Directed , M&L For 8Mm Thick Seamless Calcium Silicate Ceiling Made Out Of 1800 X 1200 Mm Size Board Of Siliceous And Calcareous Material Reinforced With Cellulose Fibre Fixed To The Ceiling Section With 25 Mm Long Self Drilling And Tapping Screws Having Phillips Head With Under Head Cutter At 200 Mm Centre To Centre, Including Finshing The Joint Of Face Board With Specially Formulated Jointing Compound And 48 Mm Wide Fibre Tape To Provide Seam Less Finish (Frame Work For Ceiling Shall Be Measured And Paid Separately) Complete All As Specified And Directed , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Exceeding 1.50 Sqm But Not Exc 4 Sqm. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exceeding 1.50 Sqm , S & F 2Nd Class Hard Wood Plain Solid Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed , S & F 2Nd Class Hard Wood Plain Framed Panelled Shutter 35Mm Thick (Any Number Of Panels) With Panels Of Timber Flat On Both Sides, Feather Edged Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneer 30Mm Thick Complete All As Specified And Directed , S&F 30Mm Flush Shutters, Solid Core Construction With Particle Board Core And Plywood Face Panels, Commercial Type On Both Side And Both Face Is Covered With Decorative Face Veneer With Lipping/Frame Tp Match All As Completed And Specified As Directed. , S & F 30Mm Thick 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebated And Prepared To Receive Glass, Gauze Etc But Divided Into Squares, Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc.; Sizes Of Me-Mbers Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A); Supplied And Fitted To Chowkats Complete All As Specified And As Directed , S&F Ms Window Guard Bars, Window Frames Etc Articles Confirming To Fe 410-0 Or Fe 310-0 Complete All As Specified And Directed , S & F 100Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S & F 75Mm Size Mild Steel Butt Hinges Medium Weight Cold Rolled And Fixed. , S& F Aluminium Anodised Barrel Tower Bolts 150Mm Long Of Extruded Section And Fixed , S& F Aluminium Anodised Barrel Tower Bolts 100Mm Long Of Extruded Section And Fixed , S & F 150Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F 100Mm Size Extruded Aluminium Alloy Handles, Fabricated Type Anodised , S & F Aluminium Alloy, Anodised, Sliding Door Bolts 300Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed Complete All As Specified And Directed , S&F Pre Coated Mild Steel Floor Door Stopper ,Tongue Anodized 140Mm Length Including Vulcanised Rubber Piece Complete All As Specified And Directed , M&L For Power Coated Anodised Aluminium Frame For Doors, Windows, Ventilatores With One Or More Rebated Including Joiing Cleat For Fixing Etc Complete All As Specified And Directed , S & F Anodised Aluminium Window And Ventilator Shutters, Fixed Type Without Sash Barsaluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glzing Clips,Rubber Packing,Anodised Aluminium Snap Beading,Screws Etc And Power Coating Of Any Colour(Thickness Of Powder Coating Not Less Than 50 Micron.) Complete All As Specified. , M & L For 4.80 Mm Sheet Glass, Ordinary Quality And Glazing With Aluminium Clip And Beading In Square Exc 0.5 Sq. M In Each Pane , S & F Gi Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm Etc All As Specified. , Dismatling Of Mild Steel Work Any Description , M&L For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Conforming To Fe 290 (Gde E-165) Complete All As Specified And Directed , M&L For Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) And Hanging; Also Fastening And Fixing Complete Conforming To Fe 290 (Gde E-165) Complete All As Specified And Directed , M & L For Preparation Of New Or Previously Untreated Steel Surface And Applying Two Coat Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer To Steel And Iron Surfaces Of Any Description Over 10 Cm In Width Or Girth Not Otherwise Described Including Preparation Of New Steel Surfaces Complete All As Specified And Directed , Dismantling Plain Or Corrugated Steel Sheeting Of Any Thickness As In Roof Coverings Complete All As Specified And Directed. , Supply And Fix 0.63 Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugation Side Lap, Fixed With L-Type Or J-Type Or Cranked Hook Bolts In Lieu Of Screws And Washers, In Roofs, Walls Etc. With Grade Of Zinc Coating 275 Gsm Complete All As Specified And As Directed. , S & F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering Cladding To Wall, Fixed With Self Tapping Screws As Specified. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified. , M & F For Solid Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing Complete All As Specified And Directed , M&L 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed , S&F In Rep Pvc (Swr) Wc Connector 110Mm Dia. , S&F In Repair Vitreous China Squatting Pan Orissa Pattern Size 580 X440 Mm White With Integral Foot Rest Complete All As Specified And Directed , S&F In Repairs 10 Ltrs Capacity Pvc Valveless Syphonic Action Type Flushing Cistern Low Level White With Inlet Ball Valve, Float, Chain And Pull And Brackets Etc Complete All As Specified And Directed , S & F In Repair Pvc Connection 15Mm Dia 450 Mm Long With Brass Check Nuts And Washers Complete All As Specified And Directed , S&F In Repair Vitreous China Wash Down Water Closet Pan Of Pedestal Pattern, White With P Or S Traps, Including Connecting To Trap And To Flushing Pipe Etc Complete All As Specified. , S & F In Repair Plastic Water Closet Seat Cover, White Closed Pattern With Flat Bottom, And Cover And Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And Directed , Dismantling Of Ci Soil, Rain Water Pipes, Cast And Vent Pipes Of Any Dia, Any Pattern Including All Fittings. , S&F Pvc (Swr) Pipes Single Socketed 110Mm Dia In Any Length With Rubber Ring Joints Fixed To Walls Complete All As Specified And Directed , S&F In Rep Pvc (Swr) Bends Any Radius, Bend 110Mm Dia With Access Door , S&F Pvc (Swr) Pipes 75 Mm Bore Single Socketed, In Any Length With Rubber Ring Joints, Laid In Trenches,Wall Or In Floors Complete All As Specified And Directed , S&F In Repair Pvc Bends Any Radius 75Mm Bore , S&F In Rep Pvc (Swr) Floor Trap, 75Mm Dia Outlet, Plain With Grating Incl Jointing With Solvent Cement. , Material & Labour For Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Where Ever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, Including Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of Floor Or The Side Of Waist Slab With Suitable Arrangement Complete All As Specified And Directed , Demolition For Brickwork Or Precast Concrete Articles, Built In Cement/Lime Mortar Including All Quoins, Arches, Pillars, Etc, But Excluding Ashlar Facings, Dressed Stonework And Precast Concrete Articles , M&L For Plain Cement Concrete 1:3:6 Type C-1(20 Mm Graded Aggregate) Precast Cement Concrete Block Masonry With Solid Blocks Exc 10 Cm In Width And Setting In Cm 1:6 Etc Complete All As Specified And Directed , M&L Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surface In Cement Plaster 1:4, Finished Even And Smooth Without Using Extra Cement With Wpc Completed All As Specified And Directed. Note : Wpc Will Be Measured And Paid Separately) , Supply Only Integral Water Proofing Compound , M & L 100Mm Thick Cement Concrete Type C2 (1:3:6) Using (40Mmgraded Aggr.) As In Sub Base Complete All Specified And Directed , M&L For 20Mm Thick Screed Bed Or Bedding Layer In Cm (1:6) For Laying Floor Finishes Complete All As Specified And Directed , M&L For Chequered Cement Concrete Tiles 200X200x25/300X300x25mm Etc. Set And Jointed And Pointed In Neat Cement Slurry In Floor With Grey Cement And Pigment All As Directed. , M&L For 40 Mm Thick Plain Cement Concrete 1:2:4 Type B1 (Using 20 Mm Graded Granite Stone Aggregate) In Floorings Including Finishing The Surface Even And Smooth Using Extra Cement All As Specified , M&L For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block With Grey Cement And No Pigment Any Shape And Size Confirming To Is 15658-2006 Of 60 Mm Thickness, M-35 Grade Complete All As Specified And Directed , M&L For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Arunachal Pradesh View Result →
22.
Defence #11161321 Price Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Any Guage, Thickness, Including Nainital Pattern Or Similar Pattern Roof Covering Complete All As Specified And Directed. , Demolition Of Brick Work Or Stone Masonry Precast Plain Cement Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each.& Removing To Or From Store All As Specifed & Directed. , Taking Down Cement Or Cement Lime Plaster Of Any Description On Brick Or Plain Cement Concrete Blocks Or Stone Wall Or Concrete Surface Etc Including Racking Out Joints, Hacking For Keys, Scrubbing Down With Water Etc All As Specified And Directed. , Dismantling Of Ceiling Board (Flbre Pulp, Insulation Etc) Or Insulation Boards/Slabs/Blankets Any Thickness, Including Cover Fillets Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc 15Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed. , Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And Directed. , Dismantling Of Timber Scantling 40 Sqcm And Over In Section In Any Position As In Framed Work Complete All As Specified And Directed. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , Dismantling Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors Laid Bedded And Pointed In Any Mortar, Aprons Etc. , Taking Up Or Down 15Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Taking Up Or Down 20Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Dismantling Water Tanks 500 Ltrs Capacity Complete All As Specified And Directed. , Dismantling Water Tanks Of Any Description, Capacity Exceeding 500 Litres But Not Exceeding1000 Liters Complete. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For. , S&F 0.63Mm Thick Galvanised Corrugated Ms Sheeting (Cgi Sheet Roofing) With Two Corrugation Side Laps, With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusive Fixed With Coach Screws And Washers As In Roofs Etc All As Specified , S&F 0.63Mm Thick Plain Galvanised Ms Sheeting Using Grade-O Sheets With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusives, As In Roof, Ridges, Hips, Valley Gutters, Drip And Straight Flashing Complete All As Specified And Directed. , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa (Az 150) As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , M&L For Brick Work With Sub Class B Bricks Using Old Size Bricks Straight Or Curved On Plan Exc 6 Mtr Mean Radius, Built In Cm 1:6 All As Specified And Directed. , M&L For Rendering 15 Mm Thick Readymade Plaster On Inner/Outer Walls By Adding 17-19% Of Potable Water By Weight Of Material For Thickness Above 15Mm It Is Recommended To Be Applied In Multiple Layers. Ready Mix Plaster Shall Complies With Is 1661-1972, Is 2250-1965, Is 2402-1963 And Confirms The Compressive Strength @ 28 Days 10-12 Mpa/Bulk Density 1500-1600 Kg/M3. (Note : The Rate Quoted By Contractor Shall Include Cleaning Of Surface, Application As Per Instruction And Scaffolding Upto 20 Mtr Ht All As Specified And Directed) , M&L For Preparation Of New Plastered Surfaces & Applying A Layer Of 3Mm Thickness Birla Putty On Wall Surfaces Including Cornics Etc For Proper Levelling Of Plaster And Two Coat Of Oil Emulision Distemper Complete All As Specified And Directed. , M&L Preparation Of Newlly Plastered Surfaces Of Ceiling Surfaces And Applying Three Coats Of White Wash Complete All As Specified & Directed , Material & Labour For Applying Two Or More Coats Of 100% Remium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance,Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives@ 1.43 Litre/ 10 Sqm Over And Including Primingcoat Of Exterior Primer Applied @ 0.90 Litre/ 10Sqm Over New Surfaces Complete All As Specified And Directed. , M&L Preparation Of Old Surfaces Including Cornices Etc And One Coat Of Oil Bound Distemper Complete All As Specified And Directed. , M&L For Preparation Of Old Plastered Surfaces & Applying A Layer Of Birla Putty On Wall Surfaces Including Cornics Etc For Proper Levelling Of Plaster And Two Coat Of Oil Emulision Paint Complete All As Specified And Directed. , S&F Of Powder Coated Grid Frame Work For False Celling Comprising Of The Following Sections For Making Partitions Of 600X600 Mm Size Fixed To Walls With Rawl Plugs & Screws And Hanged To Roof With And Including 4Mm Dia Gi Wire Suspender Of Suitable Length And Butterfly Clips, Size Of Main Tee Shall Be 28Mmx24mmx0.3Mm Thick , Cross Tee Shall Be 28Mmx24mmx0.3Mm Thick And Wall Angle Shall Be 24Mmx24mmx0.3 Mm Thick Incl 4 Mm Thick E-Board Classic (Make-Everest) For Insulation And Accoustic Purpose, 595 X 595 Mm Size Fixed With Staples On Snap Grid As In Ceiling With And Including Dusting Of Surface Complete All As Specified And Directed.Complete All As Specified And Directed. , S&F Solid Pvc Wall Lining Dual Colour Consisting Of 5 Mm Thick Wood Grain Printed Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specification And Drawing Complete Fixing Arrangement Icluding Taking Down Old Existing Wooden Panelling Complete. , S & F For 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing. , M & L For Plain Cement Concrete 1:3:6 (40 Mm Graded Aggregate)As In Surface Channel & Drain Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Complete All As Pecified And Directed. Concrete, Using Ex- Tra Cement, Including Forms, Moulds, Mi- Tred/Stopped Ends Etc.All As Specified And Directed. , M&L Plain Cement Concrete 1:5:10 Type E2 Using 40Mm Graded Aggregate As In Sub Base Complete All As Specified And Directed. , M&L Chequred Tiles 300 X 300 X 25 Mm Coloured Glossy Finish Rubber Pressed Moulded Of Approved Pattern & Shade Make As Approved By Ge As In Floor 15 Mm Thick Set In Cm(1:4) And Jointed Complete All As Specified And Directed. , M&L Interlocking Tiles 75-80 Mm Coloured Rubber Moulded Glossy Finish 80Mm Thick Of Approved Pattern & Shade Isi Marked Or Approved By Ge Set Jointed Over 40 Mm Thick Fine Sand Cushion Including Sides Are Tappered 75 Mm In Width By Plain Cement Concrete 1:3:6 Type C1 (Using 20Mm Graded Crushed Stone Agg.) Complete All As Specified And Directed. , M&L For 2Nd Class Hard Wood Clean Sawn As In Scantling Framed Over 40 Sqcm And Fixed With Screws Etc All As Specified And Directed.. , S & F Second Class Hardwood 25 Mm Boarding Plain One Side With Butt Joint Fixed With Nails In Any Situation. Complete All As Specified And Directed. , S&F Mild Steel Framed Work Such As Purlin , Truss, Square Tube , Ms Pole , Grating Etc With End Of Bars Shouldered And/ Or Riveted Or Forged Into Spikes, Framed Guard Bars, Barred Iron Doors, Ladders, Framed Balusters, Walk Ways, Railings, Welded Wire Mesh And Similar Work Confirming To Fe-290 Gde E-165 Complete All As Specified And Directed. , M&L 300X450x7mm Thick Glazed Ceramic Digital Tiles Coloured Incl , Design And Pattern As Approved Fixed As In Vertical Surface Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Cement With Colour Pigment To Match Incl Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Complete All As Specified And Directed. , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.11 Sqm But N.Exc. 0.18 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigment Incl 15Mm Thick Screed Bed In Cm 1:6 Complete All As Spd , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.18 Sqm But N. Exc. 0.38 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigments Incl 15Mm Thick Screed Bed In Cm 1:6Complete All As Spd , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.18 Sqm But N. Exc. 0.38 Sqm In Skirting /Dado Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigments Incl Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Complete All As Specified And Directed.Complete All As Spd , M&L 18 To 20 Mm Thick Granite Stone On Steps Including Rubbing And Polishing And Making Hole For Gas Pipe And Front Portion Rounded And Chamfered Complete Including Screed Bedding 15 Mm Thick In Cm 1:4 Complete All As Spd , S&F In Repairs Parquet Flooring 8.3 Mm Thick Hard Board Plank Both Side Laminated With Decorative Surface And Approved By Ge Laid Above The Thermoplastic Sheet Complete All As Spd , M&L For 15Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , M&L For 20 Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 500 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Make - Prayag Complete All As Specified And Directed. , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 1000 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Make - Prayag Complete All As Specified And Directed. , S&F Angle Cock 15 Mm Bore Brass Chromium Plated, Screwed Both Ends For Pipes Or For Unions Fixed In Repairs Including Making Good To Match With Existing Surface , S&F Pillar Taps 15 Mm Bore, Brass Chromium Plated , Screwed Down High Pressure With Or Without Letter Hot Or Cold With Long Screwed Shanks And Fly Nut Complete All As Specified, Fixed In Repairs. , S&F Bib Tap Standard Of Ptmt (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath Fitting), Any Colour, Screwed Foriron Pipe 15 Mm Bore Pipe (Minimum Weight 90 Gm) All As Specified, Fixed In Repairs (Make : Prayag Or Equivelent As Approved) , S&F In Repair Polymer White (Polypropeylene Delrin And Abs) Low Level Flushing Cistern 10 Ltrs Capacity, Valveless, Syphonic Action Type Complete With Inlet, Ball Valve Float Valve, Bends Brackets, Rawl Plug, Brass Screws Handle Etc Complete, Complete All As Specified And Directed. , S&F In Repairs, 550X400mm Vitreous China, Wash Hand Basin , Flat Back With Pedestal Excluding Trap And Waste Chain And Plug And Porcelain Stopper Including Sutaible Size Brackets Waste Pipe And Waste Coupling Complete All As Specified And Directed. , S&F Vitreous China Squatting Pan Orrissa Pattern Size 580 X 440 Mm White With Intregal Foot Rests, With & Including P Or S Trap (Excluding Material & Labour Of Flushing Cistern And Flush Pipe) Including Conection To Trap And To Flush Pipe Etc Complete Including Making Good To Floor Complete All As Specified And Directed Fixed In Repairs. , S&F In Repair 15Mm Dia Bib Tap Long Body Cp, Screwed For Iron Pipes Complete All As Specified And Directed , S&F Aluminium Partition Powder Coated Of Frame Of Aluminium Section 44.45 X 44.45 X 1.6Mm Etc And 5 Mm Thick Sun Broken Glass Fixed With Gasket With Aluminium Clip , Jointing Clips, Glazing Clips, Rubber Packing, Screws Etc.And As Directed At Site. Make Jindal Or Its Equivalent Approved Make Including Taking Down Old Userviceable Wooden Partition Completeall As Spd , M&L Preparation Of New Or Previously Untreated Steel And Iron Surfaces Of Any Description, Over 10 Cm In Width Or Girth, Not Otherwise Described And Applying Two Coats Of Synthetic Enemel Paint Over A Coat Of Red Oxide. , S&F In Repairs Hydraulic Door Closer Aluminium ( Die Cast) Regulated Designation No-3 Universal Type For Door Shutter Complete All As Spd , S&F 18Mm Thick Mdf Board Both Side Finished As In Wardrobe/ Cup Board Shutter All As Specified And As Directed By Engineer-In-Charge. , Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden/Metal Frames, Glazed With Putty Or Fixed With Beads Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones All As Specified , S&F 3 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square Not Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed. , S&F In Repairs Of Galvanised Mild Steel Wire Cloth 0.45 Mm Nominal Dia Of Wire And Average Width Of Aperature 1.18Mm And Fixed With Tinned Tacks Or Galvanised Wire Staples Complete All As Specified And Directed. , S & F 20Mm Dia Aluminium Alloy Anodised Curtain Rod Decorative Fency Type With Brackets Complete All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Uttarakhand View Result →
23.
Public Administrative Department #11150983 Technical Bid
Tender for Demolishing Brick Work Manually/By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable In Cement Mortar , Demolishing Reinforced Cement Concrete Work Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge: , Demolishing Brick Tile Covering In Terracing Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. , Demolishing Mud Phaska In Terracing And Disposal Of Material Within 50 Meters Lead , Providing And Laying Water Proofing Treatment On Roofs Of Slabs By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : (A) After Surface Preparation, First Layer Of Slurry Of Cement @ 0.488 Kg/Sqm Mixed With Water Proofing Cement Compound@ 0.253 Kg/Sqm. (B) Laying Second Layer Of Fibre Glass Cloth When The First Layer Is Still Green. Overlaps Of Joints Of Fibre Cloth Should Not Be Less Than 10 Cm. (C) Third Layer Of 1.5 Mm Thickness Consisting Of Slurry Of Cement @ 1.289 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.670 Kg./Sqm. And Coarse Sand @1.289 Kg/Sqm. This Will Be Allowed To Air Cure For 4 Hours Followed By Water Curing For 48 Hours. The Entire Treatment Will Be Taken Upto 30Cm On Parapet Wall And Tucked Into Groove In Parapet All Around. (D) Fourth And Final Layer Of Brick Tiling With Cement Mortar (Which Will Be Paid For Separately) For The Purpose Of Measurement The Entire Treated Surface Will Be Measured. , 10Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa At 35Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Specified Tile Bricks Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finishing Neat. With Common Burnt Clay (Non Modular) Brick Tiles Of Class Designation 10.0 , Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Stone Aggregate 10 Mm And Down Gauge), Including Finishing With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) As Per Standard Design. In 75X75 Mm Deep Chase. , Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over P.V.C. Sheet 1 M X1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement: 3 Coarse Sand) And A Coat Of Neat Cement, Rounding The Edges And Making And Finishing The Outlet Complete. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Internal Work Concealed Fixing The Pipe With Clamps At 1.00 Meter Spacing Including Cutting Chases And Making Good The Wall Etc. 15Mm Nominal Outer Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Internal Work Concealed Fixing The Pipe With Clamps At 1.00 Meter Spacing Including Cutting Chases And Making Good The Wall Etc. 20Mm Nominal Outer Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain And Brass Threaded Fittings. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge. Internal Work Concealed Fixing The Pipe With Clamps At 1.00 Meter Spacing Including Cutting Chases And Making Good The Wall Etc. 25Mm Nominal Outer Dia Pipes , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. (I) Single Socketed Pipes 75 Mm Diametre , Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. (I) Single Socketed Pipes 110 Mm Diametre , Providing And Fixing One Piece Construction White Vitreous China Squatting Plate With An Integral Longitudinal Flushing Pipe, White P.V.C Automatic Flushing Cistern, With Fittings, Standard Size G.I./ Pvc Flush Pipe For Back And Front Flush With Standard Spreader Pipes With Fittings, G.I Clamps And In C.P Brass Coupling Complete, Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Etc. Wherever Required: Range Of Two Squatting Plates With 5 Liter P.V.C. Automatic Flushing Cistern. , Providing And Fixing Kitchen Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P. Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. 18.10.1 White Glazed Fire Clay Kitchen Sink Of Size 600X450x250 Mm , Providing And Fixing White Vitreous China Squatting Plate Urinal With Integral Rim Longitudinal Flush Pipe. , Providing And Fixing Mirror Of Superior Glass (Of Approved Quality) And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6 Mm Thick Hard Board Backing Rectangular Shape 453X357 Mm , Providing And Fixing Ptmt Waste Coupling For Wash Basin And Sink, Of Approved Quality And Colour:Waste Coupling 31Mm Of 79 Mm Length And 62 Mm Breadth Weighing Not Less Than 45Gms. , Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Brackets Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. , Providing And Fixing Ptmt Bottle Trap For Wash Basin And Sink: 18.70.1 Bottle Trap 31 Mm Single Piece Moulded With Height Of 270 Mm, Effective Length Of Tail Pipe 260 Mm From The Centre Of The Waste Coupling 77 Mm Breadth With 25 Mm Minimum Water Seal, Weighing Not Less Than 260 Gms. , Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With A Minimum Distance Of 37 Mm From Wall Face With Concealed Fittings Arrangements Of Approved Quality And Colour, Weighing Not Less Than 88 Gms. , Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour: 450 Mm Long Towel Rail With Total Length Of 495 Mm, 78 Mm Wide And Effective Height Of 88 Mm, Weighing Not Less Than 170 Gms. , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Make Conforming To Is : 8931 , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms. , Providing And Fixing 15 Mm Nominal Bore Of Standard Back Type C.P. Brass Close Hole Basin Mixer Pillar Tap Of Approved Quality And Make, Weighing Not Less Than 1.970 Kg. , Providing And Fixing White Vitreous China Wash Basin Including Making All Connections But Excluding The Cost Of Fittings. Flat Back Wash Basin Of Size 630X450 Mm. , Providing And Fixing White Vitreous China Pedestal For Wash Basincompletely Recessed At The Back For The Reception Of Pipes And Fittings , Providing & Fixing T-Iron Frames For Doors, Windows & Ventilators Of Mild Steel Tee-Sections, Joints Mitred & Welded, Including Fixing Of Necessary Butt Hinges & Screws And Applying A Priming Coat Of Approved Steel Primer. Fixing With 15X3 Mm Lugs 10Cm Long Embedded In Cement Concrete Blocks 15X10x10cm Of cement concrete 1:3:6 (1Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20Mm Nominal Size) . , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding , Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 1 Mm Thick , Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. , Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Liter Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour. Two Coats , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade On New Work (Two Or More Coats Applied @ 1.67 Liter/10Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg/10Sqm) , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound) Content. With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Liter , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound) Content. With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Liter , Providing And Fixing Of Electrical Points Including Concealed Pvc Pipes Wiring Fan Boxes In False Ceiling Etc All Complete Job , Providing And Fixing Exhaust Fans Including Fitting All Complete Job , Providing And Fixing Of Concealed Lights Of 15 Watt Capacity Or Any Other Shape , Providing And Fixing Ceiliong Fans Of Approved Make , Providing And Laying Ceramic Glazed Floor Tiles 300X300 Mm (Thickness To Be Specified By The Manufacturers) Of 1St Quality Conforming To Is: 15622 Of Approved Make, Laid On 20 Mm Thick Bed Of Cement Mortar 1: 4 ( 1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete.In Colour Such As White, Ivory, Grey, Fume Red Brown , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Repairs To Plaster Of Thickness 12Mm To 20 Mm In Patches Of Area 2.5 Sq. Meters And Under, Including Cutting The Patch In Proper Shape Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 Meters Lead With Cement Mortar 1:4 (1 Cement : 4 Fine Sand) , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. Second Class Deodar Wood 35 Mm , Providing And Fixing Aluminum Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Is: 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete : , Providing And Fixing Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. 12 Mm Thick Coir Veneer Board (Conforming To Is: 14842) , Providing And Fixing Wire Gauze Shutters Using Galvanized M.S. Wire Gauze Of Average Width For Aperture 1.4 Mm In Both Directions With Wire Of Dia. 0.63 Mm For Doors, Windows And Clerestory Windows With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws As Per Direction Of Engineer-In-Charge : Second Class Deodar Wood 35Mm , Providing And Fixing Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations, Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels(Area Of Slab Over 0.5 Sqm) 16 Mm , Removal Of Mulba From Site Of Work To Beyond Muncipal Muncipal Limits Including Loading Unloading Complete , Engaging Labours Of Clearance Of Site, Sewers, Bush Cutting Etc. , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes Channels, Plates Etc. Including Welding ,Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete ,Including Fixing The Railing With Necessary Accessories And Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc. Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.).
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 5
Jammu And Kashmir View Result →
24.
Defence #11117617 AOC
Tender For Provision Of Training Shed And Pt Shed At Varanasi; Design, fabrication, supply and erecting, Pre-engineered building steel structure/LGSF made from 345 Mpa high strength Hot rolled paletes and factory produced zincalume cold rolled light gauge steel zincalume frame (1 mm BMT)for provision oftraining and PT Sheds of size 72 metre x 18 metre x7.95 metre height from FFL to bottom of truss using 0.45 mm base metal thickness, pre-painted 0.50 mm corrugated galvalume aluminium zinc coating (AZ-150 GSM) aluminium zinc alloy coated colour having tensile strength of 550Mpa as in roofingfixed with self tapping screws including S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick (AZ not less than 150) of colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/cladding to wall fixed with self tapping screws, (factory made valley gutter, shape and size directed by Engineer-in Charge including supply of bolts, gutter bolts, screws, washer, pipe nails distance pieces, plug, holder bats for pipe and all jointing materials, down take pipe, downspout pipe and metal clamp of appropriate size and shape and LGSF structure with brick work in CM 1:4 onas per mentioned in architectural drawing all as specified with following design parameters all as specified and vetted design and drawing by any IIT/NIT and approved by Chief Engineer Lucknow Zone with permanent specification complete all as specified and as shown on drawing:-(i) Frame type Pre-Engineered Building (ii) Size of training and PT shed as perarchitectural drawing (iii) LGSF structure with 1 mm to 2.5 mm thick(iv) Anti-corrosion treatment and painting as per IS -1477 Part 1 & 2 .(v) PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including form work in base of footing.(vi)RCC work M-30 in footing, plinth beam & Stair case/steps as per approved mix design and as per IS:9103(vii)All necessary civil works for setting for super structure layout, excavation, back filling, removal of surplus soil, RCC foundation/footing, plinth beam, RCC sitting step with granite finish including bull nosing finish & Stainless steel railing complete.Note : (i) Design parameters of PEB structure is attached as appendix ‘A’ (ii) Following items mentioned under srl no 1.01 to1.13 here-in after shall also be included in lump sum rate quoted against Srl item No 1 of BOQ. 2 Site clearance/site developments 3 Anti termite treatment 4 All primary structural components should be confirmed to IS: 2062 E-350 BR, Having a minimum tensile strength of 490 MPs and pass physical & Chemical tests stipulates therein 5 Purlins and side girt membersshall be made from cold Formed Sections, Confirming to IS : 811, having a minimum tensile strength of 345 MPs. The sheets used for cold forming sections shall confirm to IS : 1079, 2009 quality HR3 6 Permanently colour coated high tensile steel sheet havingminimum base metal thickness of 0.45mm (i.e excluding Aluminium -Zinc/galvanizing & colour coating thickness) & minimum Yield strength of 550 Mpa, coated with 55% Al-Zn alloy @ 150 g/Sqm as per ASTM A792M; Color coated with total minimum thickness of 40 microns (nominal) comprising of Silicon, Modified polyester (SMP with silicon content of 30% minimum) paint or super Polyester paint of minimum 20 microns (nominal) Dry Film Thickness (DFT) on exposed side over 5 microns (nominal) primer coat and 10 microns (nominal) approved colour Epoxy paint on other side over 5 microns (nominal) primer coat as per ASTM A755M 7 Kota stone flooring shall be 18 to 20 mm thick machine cut and polished at site after fixing (Mirror polish/granite polish). Size of Kota stone slabs used in floors shall be not less than 500 mm x 500mm.Kota stone slab shall be laid over 20mm thick screed in CM (1:6) over 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate over rammed earth. Jointing shall be with grey cement mixed with pigment to match the shade of Kota stone slab. The floor shallachieve mirror finish surface. 8 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as inplinth protection & Saucer drain. Plinth protection surface finishedeven and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) 9 Stainless steelrailingwith SS hand rail pipes grade 304 as perarchitectural drawing shall be provided. 10 10 to12 mm thick ready mix plaster on internal surface and external surface of wall. 11 Preparation of newly plaster surface of wall and applying two coats of synthetic enamel paint over a coat of primer on internal and external surface of wall. 12 Ramp provided same as per flooring specification 13 PAINTING SCHEME FOR STRUCTURAL STEEL WORK:(a) Soap paint :- One coat of inorganic zinc silicate primer-75 microns(b) Soap paint :- One coat of polyurethane paint -30 microns(c) Site paint :- One coat of polyurethane paint- 30 microns (after erection & fixing work) 14 Applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer on other than structural steel surface 15 Design, fabrication, supply and erecting, Pre-engineered building steel structure/LGSF made from 345 Mpa high strength Hot rolled paletes and factory produced zincalume cold rolled light gauge steel zincalume frame (1 mm BMT)for provision oftraining and PT Sheds of size 36 metre x 12 metre x 7.95 metre heightfrom FFL to bottom of trussusing 0.45 mm base metal thickness, pre-painted 0.50 mm corrugated galvalume aluminium zinc coating (AZ-150 GSM) aluminium zinc alloy coated colour having tensile strength of 550Mpa as in roofingfixed with self tapping screws including S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick (AZ not less than 150) of colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/cladding to wall fixed with self tapping screws, (factory made valley gutter, shape and size directed by Engineer-in Charge including supply of bolts, gutter bolts, screws, washer, pipe nails distance pieces, plug, holder bats for pipe and all jointing materials, down take pipe, downspout pipe and metal clamp of appropriate size and shape and LGSF structure with brick work in CM 1:4 onas per mentioned in architectural drawing all as specified with following design parameters all as specified and vetted design and drawing by any IIT/NIT and approved by Chief Engineer Lucknow Zone with permanent specification complete all as specified and as shown on drawing:-(i) Frame type Pre-Engineered Building (ii) Size of training and PT shed as perarchitectural drawing (iii) LGSF structure with 1 mm to 2.5 mm thick(iv) Anti-corrosion treatment and painting as per IS -1477 Part 1 & 2 .(v) PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate including form work in base of footing.(vi)RCC work M-30 in footing, plinth beam & Stair case/steps as per approved mix design and as per IS:9103(vii)All necessary civil works for setting for super structure layout, excavation, back filling, removal of surplus soil, RCC foundation/footing, plinth beam, RCC sitting step with granite finish including bull nosing finish & Stainless steel railing complete.Note : (i) Design parameters of PEB structure is attached as appendix ‘A’ (ii) Following items mentioned under srl no 2.01 to2.13 here-in after shall also be included in lump sum rate quoted against Srl item No 2 of BOQ. 16 Site clearance/site developments 17 Anti termite treatment 18 All primary structural components should be confirmed to IS: 2062 E-350 BR, Having a minimum tensile strength of 490 MPs and pass physical & Chemical tests stipulates therein 19 Purlins and side girt membersshall be made from cold Formed Sections, Confirming to IS : 811, having a minimum tensile strength of 345 MPs. The sheets used for cold forming sections shall confirm to IS : 1079, 2009 quality HR3 20 Permanently colour coated high tensile steel sheet havingminimum base metal thickness of 0.45mm (i.e excluding Aluminium -Zinc/galvanizing & colour coating thickness) & minimum Yield strength of 550 Mpa, coated with 55% Al-Zn alloy @ 150 g/Sqm as per ASTM A792M; Color coated with total minimum thickness of 40 microns (nominal) comprising of Silicon, Modified polyester (SMP with silicon content of 30% minimum) paint or super Polyester paint of minimum 20 microns (nominal) Dry Film Thickness (DFT) on exposed side over 5 microns (nominal) primer coat and 10 microns (nominal) approved colour Epoxy paint on other side over 5 microns (nominal) primer coat as per ASTM A755M 21 Kota stone flooring shall be 18 to 20 mm thick machine cut and polished at site after fixing (Mirror polish/granite polish). Size of Kota stone slabs used in floors shall be not less than 500 mm x 500mm.Kota stone slab shall be laid over 20mm thick screed in CM (1:6) over 100 mm thick PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate over rammed earth. Jointing shall be with grey cement mixed with pigment to match the shade of Kota stone slab. The floor shallachieve mirror finish surface. 22 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as inplinth protection & Saucer drain. Plinth protection surface finishedeven and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) 23 Stainless steelrailingwith SS hand rail pipes grade 304 as perarchitectural drawing shall be provided. 24 10 to12 mm thick ready mix plaster on internal surface and external surface of wall. 25 Preparation of newly plaster surface of wall and applying two coats of synthetic enamel paint over a coat of primer on internal and external surface of wall. 26 Ramp provided same as per flooring specification 27 PAINTING SCHEME FOR STRUCTURAL STEEL WORK:(a) Soap paint :- One coat of inorganic zinc silicate primer-75 microns(b) Soap paint :- One coat of polyurethane paint -30 microns(c) Site paint :- One coat of polyurethane paint- 30 microns (after erection & fixing work) 28 Applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer on other than structural steel surface 29 INTERNAL ELECTRIFICATIONM&L for point wiring completeforOne light/Fan/Exhaust Fan/Bell point/ Bldg Security Light / Industrial wall mounting fancontrolled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 25 mm in roof / floor slab and ceiling, pressed GI concealed terminal modular boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of required colour complete, including suitable cover plate of any module including 1.5 Sqmm PVC, FRLSH cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(i) In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.(ii) Height of socket should be 1.2m above from FFL(iii) Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost. 30 M&L for Point wiring completeforone 5 Pin 5 Amp switch Socket outlet point on an independent board, with PVC insualted and unsheathed FRLSH CABLE 1.5 Sqmm (nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall / roof / floor slab and ceiling, pressed GI concealed terminal modular boxes not less than 1.6 mm thick of required size and with top cover 3 mm thick of plastic laminated sheets of requied colour complete, including 1.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :-(i)In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.(ii) Height of socket should be 1.2m above from FFL 31 M&L forPoint wiring completefor power point controlled by oneswitch with PVC insualted and unsheathed FRLSH cable 2.5 Sqmm(nominal area) ISI marked, multi-stranded copper conductor single core including ISI marked 25 mm dia non metalic PVC conduit medium grade concealed in wall and heavy duty PVC conduit not less than 25 mm in roof /wall/ floor slab and ceiling, suitable for modular switch with modular metal flush box with inner and outer cover plate & frame etc of requied colour complete, including 2.5 Sqmm PVC, FRLS cable insulated unsheathed copper earth wire to the common earth and connecting to earth dolly, including colour coding of cable shall be Phase-red, Neutral-black and Earth- green with all accessories complete all as specified and directed.Note :- In case of roof/ceiling, heavy duty PVC pipe not less than 25 mm dia shall be used without any extra cost.One circuit controlled by max one points only. 32 S&F Switch piano, flush type 5 Amps single pole, one way complete all as specified and directed. 33 S&F Socket outlet, flush type 2 in 1, 5 pin, 6 Amps, multi-purpose complete all as speci-fied and directed. 34 S&F Switch piano, flush type single pole, one way 16 Amps complete all as specified and directed. 35 S&F Socket outlet, flush type 2 in 1, 5 pin, 5 and 16 Amps, multipurpose complete all as specified and directed. 36 S&F ceiling rose two to three terminal, complete all as specified and directed. 37 S&F BLDC type air circular wall mounting fan 750mm Sweep, single phase 230 V AC, 1440 RPM, air delivery CMM, power consumption 250 watt, with string, 3 speed choice colour mate, 5 star rating & ISI marked alongwith complete accessories and connecting up the fan to ceiling rose incl PVC insulated 3 core 23/0.0076 copper cable & suitable size of flexible cord with plug top from ceiling rose to wall mounted fan arrangement on pillar / wall is deemed under quoted item rate, complete all as specified and directed 38 S & FLED wide beam optics High Bay Light 100 Wdaylight 150 lum/Wwith PDC housingsuitable for ceiling (surface/suspended) rated aluminium housing indoor type with all fixing arrangement, complete all as specified and directed. 39 S&F LED Building security light fitting 35 Watt with aluminum pressure die cast housing, high purity PC Fresnel diffuser with silicon gasket for IP-65 protection, power consumption <20 W (35W) & luminaire lumen >2500 lm and system efficiency > 120 lm/W, in built electronic driver prewired upto terminal block with driver efficiency >85% power factor >0.95 as light source with toughened glass including two core flexible copper wire of 1.5 sq mm from ceiling rose to the connector of fitting, connection wires not to be more than 2.5 in length and made out of GI tubing 35/40 mm dia /suitable dia light grade bend to shape security light fitting with necessary MS clamp 25 mm wide and 6 mm in thickness in suitable length not more than 30 CM and max length of pipe 1.5 Mtr long with one code of anti corrosive primer and two coats aluminum paint including nuts, bolts and washers, complete all as specified and directed. 40 S & F MCB DB vertical type 4-way VTPN sheet metal enclosures 415 V with 200 Amp fully insulatedstandard copper Bushbar for each phase & sourrounded with neutral Bars & two common neutral bar, two earth bar incl cable ties fo cable management suitable for housing MCCB/TPN 415 V as incommer IP-54 protection with metal doors all enclosed on standard steel sheet flush mounted type double door factory fabricated complete without MCB & MCCB but with enclosure blank plate, complete all as specified and directed. 41 Supply and fixing MCB DB single pole pole with neutral sheet metal enclosure double door type, 240 volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standardsteel sheet flush mounting type factory fabricated powder coated complete without MCB and with enclosure blank plates for unused way suitable for 12- way ISI marked, complete all as specified and directed. 42 Supply and fixing MCB DB single pole pole with neutral sheet metal enclosure double door type, 240 volts AC, with 200 amp rated bus bar of suitable size plate and common neutral link all enclosed in standardsteel sheet flush mounting type factory fabricated powder coated complete withoutMCB and with enclosure blank plates for unused way suitable for 8- way ISI marked, complete all as specified and directed. 43 S&F MCB SPN 32 Amps B series, 10 KA-240 Volts, AC ISI marked, complete all as specified and directed. 44 S&F MCB single pole 6 to 32 Amp rating C Series,10 KA240 Volts, AC50 Hz , ISI marked, complete all as specified and directed. 45 S&F MCCB 415 Volts AC, with 100 amp rated bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated ,powder coated complete with out MCCBand with enclosure blank plates for unused way suitable for 4 way, complete all as specified and directed. 46 M&L for submain wiring with two single core 4 sqmm copper conductor FRLSH, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit not less than 25 mm dia medium grade ISI marked concealed in wallsurface / ceiling for sub main connection including 6 sqmm PVC insulated multistranded unsheathed copper conductor used as earth wire to cdommon earth and connection to earth dolly, complete all as specified and directed.Note:- Two single core 6 sqmm copper conductor for phase / neutral, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. 47 M&L Earthing complete with galvanised mild steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using GI earth wire 4 mm dia as earth electrode connected to bolts, nuts, check nuts and washers of GI or steel etc at one end and connected to equipment at another end.GI earth wire encased in and including 15 mm dia GI light grade pipe from upper end of earth plate upto equipment 20 dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, test point, GI funnel with wire mesh fixed on water pipe PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in pit chamber and RCC pit cover slab of 50 mm thick precast RCC (1:1.5:3) type A-1 duly reinforced with MS TMT bars 8 mm dia @ 150 mm c/c both ways with 10 mm dia MS round baras in lifting handles, excavation earth work including laying the GI pipe concealed in floor/wall all as described in electric plate no 3 of SSR part I complete all as specified and directed and testing on completion. Note:- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.(ii) Earthing wire beyond 7.5m shall be measured and paid separately. 48 B&R WorkM & L One closed side panel of ACP Sheet with framed Mild steel structure at one side of shed with the raised platform arrangement of size12m x 6m of brick work and Tile/marble flooring for Yoga / PT Shed, complete all as specified and directed. 49 M & L for Design, fabrication ,supply & erection of pre-engineered steel building incl civil works inside shed for One store Room of dimension 5 m x 5 m, complete all as specified and directed. 50 Material and Labour for 08 nos Rope Gallows made up of framed mild steel structure fixed to walls/floors with sliding arrangement which can be slided to one side when not in use with 5 ropes to be hung from each rope gallows including painting with primer, complete all as specified and directed. 51 Material and Labour for 04 nos beam bars made up of framed mild steel structure fixed to walls/ floors to be placed at one side of edge including painting with primer, complete all as specified and directed. 52 Material and Labour for 20 nos chin up bars made up of framed mild steel structure fixed to walls/ floors at 2.4m height fixed at one side of edge of shed including painting with primer, complete all as specified and directed. 53 Supply and fixing MS grill bars all around the shed, complete all as specified and directed. 54 EXTERNAL ELECTRIC SUPPLYSupply,installation and testing of factory made,CPRI Approved cubical outdoor (Kiosk) type feeder pillar box 415 volt, 4 wire, AC 50 Hz, made out of 3.15 mm thick CRCA sheet ,weatherand vermin proof powder coating finish bothside(interior & exterior) for outdoor mounting withhaving degree of protection as per IP-56 complete factory lock two earth terminal suitable cable gland for all incoming and outgoing and removable neutral link,Both Side openable double door Indicating light LED type RYB - 01 Set,Ammeter-01, Voltmeter-01, connecting strip/solid conductor brought out to cable chamber brass/copper nut, bolts/washer etc including grouting of feeder pillar box 60 cm above ground level including suitable size angle iron stand made up of65 x 65 x 6 mm welded on all the four corner embedded in PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) upto 30 cm includingexcavation and earth work complete with following asseccories:-(a) copper insulatd busbar high conductivity 400 Amp rated 4 phase including neutral bus bar complete - 01 No.Incoming :-(b) MCCB4 -pole 160 Amp make-L & T,415 Volt,breaking capacity 36 KA,50 HZ with thermal magnetic release - 01 No.Outgoing :-(c)MCCB 4 - pole 125 Ampsbreaking capacity 25 KA, 50 HZ- 02 Nos. (d)MCCB 4 - pole 63 Ampsbreaking capacity 25 KA, 50 HZ- 01 No. 55 M&L for bus bar box of sheet metal 3 mm thick powder coated, having 4 Nos. aluminium bus bar of rating 200 Amp mounted on insulator including 01 No. of MCCB 4 pole 63 Amp 415 volts with thermal magnetic release as incomer, breaking capacity 25 KA inside the box and suitable fixing arrengement like flat iron clamp of size 25x3mm with hinged cover & locking arrangementincluding grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 40 X 40 X 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete duly painted with two coat of synthetic enameled paint over a coat of red oxide primer fixed in repair outdoor type duly fitted oncomplete all as directed by Engineer-in-charge. 56 Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 3.5 core XLPEcable of size 16 sqmmto 35 sqmminsulated armoured aluminium cable complete all as specified and directed. 57 Supply, jointing and testing cable jointing kit for 1100 volt grade cable for cable end termination heat shrink type joint complete with jointing material & accessories suitable for 3.5 core XLPEcable of size 50 sqmmto 95 sqmminsulated armoured aluminium cable complete all as specified and directed. 58 Supplying ,laying, commissioning & testing 70 Sq.mm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 59 Supplying ,laying, commissioning & testing 50 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including takingout old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 60 Supplying ,laying, commissioning & testing 35 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cable,complete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 61 Supplying ,laying, commissioning & testing 25 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking out old / unserveciable existing cablecomplete all as specified & directed.Note:Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BoQ. 62 Excavation in trenches, n. exc. 1.5 m wide and n. exc. 1.5 m in depth;for laying of cable, foundation, etc, or for shafts, wells, cesspits, manholes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil,complete all as specified & directed. 63 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm,complete all as specified & directed. 64 Removing excavated material n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point,complete all as specified & directed. 65 M&L sand filling under floors or in foundations including watering and consolidation,complete all as specified & directed.Note :- Punned thickness shall be measured and paid. 66 Supplying & laying reinforced precast concrete cable cover, class EHV, type 1 with peak, size 450mm x 230mm x 50mm (Note: cable cover shall be laid perpendicular to the axis of cable). 67 M&L for earthing complete with galvanised steel earth plate 600 x 600 x 6.3mm burried directly in ground (Earth pit not less than 2.25 m deep) with top edge of the plate not less than 1.5 m below ground level connected to GI strip of size 32 x 6 mm by means of nuts, bolts & washers,earth wire protected by GI pipe 50 mm dia ‘light grade’ ISI marked including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate),40 mm thick precast RCC cover in 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe ‘light grade’ ISI marked, 20 mm bore all as shown in Electrical plate No. 03 of MES Schedule Part-1 (2009) complete. 68 M&L GI pipes/tubes 80 mm bore,light gradeincluding necessary GI Fitting i.e. GI bends with socket ,reducer socket laid in trenches fixed on pole fixed on walls UG Road/floor for cable protection complete,complete all as specified & directed. . 69 M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 25x4mm galvanised iron strip,complete all as specified & directed. 70 Chain Link FencingExcavation in post holes (or similar holes) in soft/ loose soil each n exc 0.5 Cum filling in and ramming earth or broken rubble mixed with earth around, complete all speecified and as directed. 71 PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in foudation for fencing post filling, and mass concrete, complete all as specified and directed. 72 Supply and Fixing Mild steel work Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. 73 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire. 74 Supply chain link MS fencing galvanised mild steel wires 4mm diameter mesh size not less than 75mm x 75mm etc complete all as as specified and directed.
Contract Date: May 20, 2026 Contract Value : 5.24 Crore
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
25.
Defence #11085217 Price Bid
Tender for Taking Down Chowkhets Or Frames With Shutter (Without Taking Off Shutters From The Frames) Exc 1.50 Sqm And N.Exc 4.00 Sqm Each Complete All As Specified And Directed , Taking Down Chowkats With Shutter N. Exc 1.5 Sqm Each. (Without Taking Of Shutter From The Frame). Complete All As Specified And Directed , S & F Pressed Steel Frames Factory Made For Doors Out Of 1.25Mm Thick Pbi Sheet With One Of More Rebates Including Necessary Flat Iron Lugs, Hinges, Lock Strike Plate, Hinges Etc Complete, Size Of Frame 105X60mm Complete All As Specified And Directed , S & F Pressed Steel Frames Factory Made For Doors Out Of 1.25Mm Thick Pbi Sheet With One Of More Rebates Including Necessary Flat Iron Lugs, Hinges, Lock Strike Plate, Hinges Etc Complete, Size Of Frame 125X60mm Complete All As Specified And Directed , S&F 2Nd Class Hard Wood, 40 Mm Thick Plain, Framed Panelled Shutters (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers, Fitterd To Chowkhets Complete All As Specified And Directed , S&F 2Nd Class Hard Wood 35Mm Thick Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc With Sash Bars, Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass, Etc Sizes Of Members Of Shutters As Specified In Ssr Part-I Section 8 Clause 8.24(A) , Supplied And Fitted To Chowkats Etc Complete All As Specified And Directed , S & F Box Type Steel Windows/Vent With Double Shutters (Inside For Wiremesh & Out Side For Glass), Incl Guard Bar,Hinges, Steel Handle, Tower Bolt And Steel Peg Stay Complete With Glazing Bar Dovetailed Or Welded Including A Coat Of Red Oxide After Preparation Of Surface Before Fixing.Steel Window Shall Be Conforming To Relevant Is Complete All As Specified And Directed. , S & F Box Type Steel Ventilators Top Hung Double Shutters (Inside For Wiremesh & Out Side For Glass), Incl Guard Bar,Hinges, Steel Handle, Tower Bolt And Steel Peg Stay Complete With Glazing Bar Dovetailed Or Welded Including A Coat Of Red Oxide After Preparation Of Surface Before Fixing Complete All As Specified And Directed , S & F Solid Pvc Door Frames Of Sizes 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube Complete All As Specified And As Directed , S & F Factory Made Solid Panel Pvc Door Shutter With Wood Free Eps 30Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top And Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail , Lock Rail And Bottom Rail On Either Side And As Gap Insert For Top Rail And Bottom Rail , Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Framewelded/ Sealed To The Stiles And Rails With Suitable Pvc Sheet Beading , And Jointed Together With Solvent Cement In The Frame At Site As Per Specification Complete All S Specified And As Directed. , S & F 3Mm Thick Sheet Glass, Ordinary Qaulity,In Sqaures N Exc 0.5 Sqm Each Panes Etc Complete All As Specified And Directed , S & F 3Mm Thick Pin Head Glass, Ordinary Qaulity,In Sqaures N Exc 0.5 Sqm Each Panes Etc Complete All As Specified And Directed , S&F Galvanised Mild Steel Wire Cloth, 0.63Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Tinned Tacks, Or Galvanised Wire Staples Etc Complete All As Specified And Directed , S&F 150Mm Long Aluminium Anodised Barrel Tower Bolt Of Extruded Section And Fixed Complete All As Specified And Directed , S&F 300Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Stapple (Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed Complete All As Specified And Directed , S&F 150Mm Long Aluminium Handles Cast Type, Anodised And Fitted Complete All As Specified And Directed , S&F 100Mm Long Aluminium Handles Cast Type, Anodised And Fitted Complete All As Specified And Directed , S&F 100 Mm Long Butt Hinges (Medium Weight) Colled Rolled Mild Steel Complete All As Specified And Directed. , S&F 300Mm Long Ordinary Ms Rat Tail Rod Pattern Springs Incl Roller And Roller Plate Complete All As Specified And Directed , S & F 150Mm Floor Door Stopper Of Aluminium Alloy Body And Tongue, Anodised, With Hard Drawn Steel Spring, Fixed In Floor Complete All As Specified And Directed , S&F In Repair Harrison Rails, Mild Steel, Chromium Plated With Fixing Brackets, Stops, Roller Etc Complete All As Specified And Directed , S&F Iron 6 Pin Cloth Hanger Wall Mounted Door Mounted Bathroom Cloth Wall Hook, Door Hooks Rail For Hanging Keys, Ivory Complete All Specified And Directed. , Demolition Of Brickwork Or Stone Buolder Masonry, Built In Cement Mortar Including All Quoins, Arches, Pillars, Etc, But Excluding Ashlar Facings, Dressed Stonework And Precast Concrete Articles Complete All As Specified And Directed , M & L For Brick Work With Sub-Class B Bricks, Straight Or Curved On Plan With Modular Bricks Exceeding 6 M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And Directed , M&L Brickwork With Sub- Class ‘B Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Thick Walls Built In Cm 1:4 Complete All As Specifed And Directed. , Taking Down Cement Plaster On Brick Or Stone Walls, Etc .Including Raking Out Joints, Hacking For Key, Scrubing Down With Water Etc. Complete All As Specified And Directed , M&L Rendering 5Mm Thick In Cm (1:3)As In Ceiling , Soffit Of Chajja Etc.Complete All As Specified And Directed , M&L For Rendering 10Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 Without Using Extra Cement Complete All As Specified And Directed , M&L For Rendering 15Mm Thick On Unfair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Without Using Extra Cement Complete All As Specified And Directed. , Supplied Only For Integral Water Proofing Compound Complete All As Specified And Directed , M&L Two Coats Of Synathetic Enamel Paint Over A Coat Of Pink Primer On New Wood Or Wood Surfaces, Over 10 Cms Width Or Girth Incl Preparation Of Surfaces Complete All As Specified And Directed. , M & L Preparing New Plastered Surfaces Of Ceiling Chajjas Facia Etc. And Applying Three Coats Of White Wash Complete All As Specified And Directed , M & L For Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Cement Based Paint Complete All As Specified And Directed , Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces Complete All As Specified And Directed. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Clain On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , As Per Item No 34 But Old Surface Of Wall Including Preparation Of Surface Complete All As Specified And Directed Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Clain On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M & L For Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Oil Bound Distemper Over 3Mm Thick Wall Care Puttyover A Coat Of Chalk Whitening Preparatory To Distempering On Walls Etc Complete All As Specified And Directed , M & L For Preparing Old Plastered Surfaces Of Wall And Applying One Coat Of Cement Based Paint Complete All As Specified And Directed , M & L For Preparing Old Plastered Surfaces Of Wall And Applying Two Coat Of Oil Bound Distemper Etc Complete All As Specified And Directed , M & L For Preparing New Steel Surfaces Of Any Description, Not Otherwise Described Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Priming Coat Of Red Oxide Complete All As Specified And Directed. , M& L For Preparing Old Steel Surfaces Of Any Description, Not Otherwise Described Over 10 Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Complete All As Specified And Directed. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises Etc Complete All As Specified And Directed , M&L For Ceramic Tiles 7-8 Mm Thick (Square Or Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm Light Shade ,In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And As Directed. , All As Per Item No 42 Above But As In Skirting/ Dado Etc With And Including 10Mm Thik Backing Coat In Cement Mortar 1:4 An Wall Complete All As Specified And As Directed. , Demolition Of Cement Concrete In Ground Floor And Paving N.Exc 15Cm Thickness(Below Or Above Ground Level) Unreinforced Complete All As Specified And Directed , M & L Plain Cement Concrete 1:3:6 Type C2 (75 Mm Thick As In Plinth Protection & Finishing The Surface Even & Fair W/O Using Extra Cement Complete All As Specified And Directed. , M&L Of 25 Mm Thick Plain Cement Concrete 1:2:4 Type B-0 As A Sub Base To Receive Topping Layer Finished Even And Rough Complete All As Specified And As Directed. , M&L For Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over Cement Screed Base Laid And Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified And Directed , M&L For Machine Cut Kota Stone 20-25Mm Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed Base Laid And Mixed With Pigment To Match The Shade Of The Slab Includingrubbing And Polishing Complete All As Specified And Directed , M&L Makrana White Marble 18- 20Mm Thick Machine Cut, Bedded Jointed And Pointed With White Cement Slurry Including Cutting And Polishing Types (Mirror Finish) Over 15Mm Thick Screed Bed In Cm ( 1:6) As In Floor Finished, Complete All As Specified And Directed , M&L For Non-Skid Ceramic Tiles 7 To 8Mm Thick (Square/Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm , In Floors Etc . Set And Jointed In Neat Cement Slurry And Pointed In While Or Coloured Cement To Match Etc Complete All As Specified And Directed , M&L Glazed, Coloured, Ceramic, Tiles Of Size (450Mm X 350 Mm) X 7 Mm Thick, On Vertical Surfaces, Such As Dadoes, Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match With The Shade Of Tiles Complete All As Specified And Directed , Taking Out Old Unserviceable Water Closet (Squatt Pattern) And S & F Vitreous China, Squatting Pan Orissa Pattern Size 580X440mm, White With Integral Foot Rests (Excluding Flushing Cistern And Flush Pipe ) With Vitreous China ‘P Or ‘S Trap, Front Or Back Inlet Including Connection To Trap And To Flushing Pipe, Anti Syphonage Pipe And Making Good The Floor To Match The Existing Complete All As Specified And Directed , S& F In Repair Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve Float And Handle Including Brackets (10 Ltr) Including Mild Steel Tube 32Mm Dia Flush Pipe. Complete All As Specified And Directed , S&F In Repair Vitreous China Wash Basin Agle Back, Size 600X480 Mm White, Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets Complete All As Specified And Directed. , S&F In The Wall Soap Dish, Vitrious China White, Approximate Size 160X160x90 In Repairs Complete All As Specified And Directed , Taking Up Or Down 15Mm Bore Steel Tubing And Connections,Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed , S & F 15 Mm Dia Gi Tubing Medium Grade With All Fittings And Fixed Complete To Walls Or Laid In Floors. Complete All As Specified And Directed , M & L For Cutting Chases, Pinning In, Making Good To Facing Where Rerquired And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels,Etc And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring Etc And Making Good, Cutting Not Exceeding 10 Cm Girth In Brick Walls Complete All As Specified And Directed , Taking Up Or Down 20Mm Bore Steel Tubing And Connections,Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed , S & F 20Mm Dia Gi Tubing Medium Grade With All Fittings And Fixed Complete To Walls Or Laid In Floors Complete All As Specified And Directed , S & F In Repair 15Mm Bore Bib Taps, Chromium Plated Fancy Type With Crutch Or Butterfly Handle, Screwed Down Screwed For Brass Ferrule And Fixed Complete All As Specified And Directed , S & F In Repair 15 Mm Bore Pillar Taps Fancy Type Cast Copper Alloy Chrominium Plated Fancy Typewith Capstan Heads, Chromium Plated, Screwed Down High Pressure With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly Nuts Screwed For Iron Pipe Complete All As Specified And Directed , S&F In Repair 15Mm Bore Stop Valve Fancy Type, Chromium Plated, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Bath Ends For Iron Pipe Or Fixed Union And Fixed Complete All As Specified And Directed , S&F In Repairs Gate Valves 20Mm Dia With Iron Wheel Head, Screwed Both Ends For Iron Pipe Complete All As Specified And As Directed. , S&F In Repair Glass Corner Shelf Of 300Mm Long Complete All As Specified And Directed , S & F Vitreous China Urinal, Back Or Corner Wall Type, White With Ptmt Waste Fitting, Pvc Waste Pipe, Brass Cp Urinal Spreader Including Providing And Fixing Plugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal To Plugs With And Including 60Mm Long Brass Screws Complete All As Specified And Directed. , M&L For 75Mm Dia Cast Iron Nahani Trap, With Grating Including Jointing To Waste Pipe Fixed In Concrete Type B1(1:2:4) Complete All As Specified And Directed , M&L For Pvc Swr Gully Trap 125/110Mm, Setting And Jointing With Solvent Cement With Grating Including Jointing To Waste Pipe Fixed In Concrete Type B1(1:2:4) Complete All As Specified And Directed , S&F 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers Complete All As Specified And Directed , S&F In Repairs Brass Chromium Plated Tubular Towel Rail,20Mm Dia, D Type, 60Cm Long Between Flage Complete All As Specified And Directed. , M & L Pvc Connection 15Mm Size With Ptmt Nuts Of Length 600Mm Complete All As Specified And Directed , Dismantling Of Water Tanks And Removing To Store Of Capacity Exc 250 Ltr & N Exc 500 Ltr Etc Complete All As Specified And Directed , S&F 500 Ltr Capacity Rotational Moulded Polythylene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Complete All As Specified And Directed , S&F 20 Mm Dia Ball Valve Ptmt Valves, High Pressure With Polythene Float And Fly Nut Complete Screwed For Iron Pipe Or Brass Ferrule. , Dismantling Plain Or Corrugated Steel Sheeting, Any Gauze, Thickness, Including Nainital Or Similar Pattern Roof Coverings Etc Complete All As Specified And Directed , S & F For Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws Complete All As Specified And Directed , S & F Pre-Painted Galvalume Aluminium Zinc Coatingn Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Ridge, Hips, Valley Gutter, Drip And Straight Flashing Fixed With Self Tapping Screws Complete All As Specified And Directed , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Other Wise Provided Complete All As Specified And As Directed. , S&F Framed Work Rolled Section As In Framing Compound Girder Staging For End Bars, Shouldered And Riveted, Forged Into Spikes, Framed Guard Bars, Dooriron, Ladders Walk Rails, Railings, Frame Work For Tanks, Water Tank,Cooler Frame As And The Like Built Up From Two Or More Beam Or Channel Section Or Angles With Plates Stiffeners Fe 290 G E-165Etc Complete All As Specified And Directed , S & F Rolled Mild Steel In Roof Trusses(Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing(Beam,Tee, Angle, Channel Or Flat Sections)Incl Distance Pieces, Cleats,Cooler Stand Etc Conforming To Grade Fe-410W-(Gde E-250 Quality A) Complete All As Specified And As Directed. , S&F Cast Iron Soil Waste And Vent Pipe In Any Length With Or Without Ears With Cement Joints Laid In In Floors/Wall Of 100Mm Bore All As Specified Complete All As Specified And Fixed In Repair Complete All As Specified And Directed , All As Per Item 81 Above But Fixed To Floor/Wall Of 75Mm Bore Pipe Complete All As Specified And Directed , S & F Bends ( Any Radius ) With Duck Foot Or Heal Rest For 100 Mm Bore Pipe Fixed In Repair Including Taking Out Old Fittings Complete All As Specified And Directed , All As Per Srl Item No 83 Above But 75Mm Bore Pipe Complete All As Specified And Directed , S & F In Ci Branch Pieces Single (Equal Or Unequal) Ordinary Or Inverted (Spigot Or Socket Type ) Or With Parallel Branches For 100Mm Bore Pipe Fixed In Repair Including Taking Out Old Fitting Complete All As Directed With Oval Access Door Fixed In Repairs Complete All As Specified And Directed , All As Per Item 85 Above But 75Mm Bore Pipe Complete All As Specified And Directed , Dismantling Of Ceiling Board (Fibre, Pulp, Insulation Etc.) Or Insulation Of Boards/Slap /Blankets, Any Thick-Ness With Frame Work Including Cover Fillets Cornices Etc. And Serviceable Ceiling Board And Cover Fillets, Etc, Keep In Safe Custody For Re-Use, Complete All As Specified And As Directed. , M & L 6 Mm Thick Non Asbestos Fibre Cement Building Boards Fixed Or Laid/ Inserted To Timber/Gi/Aluminium Framework With Screws And Applying Two Coat Of Oil Bound Distemper Complete All As Specified And Directed , S & F Anodised Aluminium Snap Grid Frame Work 605X605 Mm For False Ceiling Complete All As Specified And Directed , S & F Hangers 6 Mm Dia. G.I. (Upto 1200Mm Length) Adjusting Level Fixed To Roof Slabs By Means Of Ceilling Cleats Made Out Of G.I. Flat 40 X 3 Mm Size 60Mm Long And Expansion Hold Fasteners 12.5Mm Dia. 40Mm Long Complete All As Specified And Directed , M&L For Plain Cement Concrete 1:4:8 Type D-2 (Using 40Mm Graded Agg) As In Foundations, Filling And Mass Concrete Complete All As Specified And Directed , Demolition Of Cement Concrete (Unreinforced) As In Roofs, Floors (Other Than Ground Floors), Beams, Staircases, Landing, Chajjas And Similar Suspended Work Complete All As Specified And Directed , M&L Providing, Cement Concrete 1:2:4 Type B-0 (12.5Mm Graded Aggregate ) As In Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges Or As In Padding Concrete Complete All As Specified And As Directed. , M&L For 10 Mm Rendering In Cm 1:4 Including Water Proofing Compound @2% Of Cement Over Roof Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed Note:- Wpc Mesured And Paid Separately. , M & L For Applying Evenly A Tack Coat Of Induatrial Bitumen 85/25 Grade @ 1.2 Kg/Sqm Complete All As Specified And Directed , M & L For One Layer Of App Based Polymeric Membrane Of Approved Manufacturer, 3Mm Thick, Weight Not Less Than 3.50 Kgs Per Sqm , Reinforced With Non Woven Polyester Fabric Or Weight Not Less Than 150 Gms Per Sqm . Polymeric Membrane Shall Be Taken To A Height 60 Cm (Minimum) And Then Inserted Inside The Groove Of Parapet Wall And Shall Be Finished By A Membrane Flashing(Note (I) Laying Of App Based Polymeric Membrane Shall Be Done By Torch On Method Or As Per Manufacturers Instructions (Ii) A Minimum Overlap Of 100 Mm And 75 Mm Should Be Made In The End And Sides Of The Polymeric Membrane Respectively And Sealed All Overlaps And Joints As Manufacturers Instructions (Iii) The Make Of Polymeric Membrane Shall Be Iwl India Ltd Chennai. Ltd Or Moply Fp Of Texsa India Ltd). Note : S&F Of App Based Polimeric Membrane Of Approved Manufacturer Will Be Laid/Fixed By Authorised Person Of The Same Manufacturers Units Asper Relevent Is. , M&L Cement Concrete Tiles 25Cm X 25Cm X 22Mm Thick, M A C H I N E Pressed; Set Jointed With Grey Cement And Pigment And Pointed In Neat Cement Slurry In Floors, And Cut And Polished Including Laid Over Screed Bed Or Bedding Layer Of Cm 1:4 Mortar 15 Mm Thick For Laying Floor Finishes Complete All As Specified And Directed , M & L Chequered Cement Concrete Tiles Of Size 30Cm X 30Cm X 25Mm Thick (With Grey Cement And Pigments) Set, Jointed And Pointed In Neat Cement Slurry In Floor,Laid Over And Incl 15Mm Thick Cement Screed Base In Cm 1:6,Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Incl Cutting, Rubbing, Grinding Complete All As Specified And A Directed. , M & L For Providing Number Plate Of Size 450 X 300X20mm In Cm 1:4 And Writing Building No Of Height 8 To 10Cms With Luminous Paint Through Grooves Of Size 12 X 12Mm ( Base: Black, Grooves : Orange) Complete All As Specified And Directed , (Schedule-A Part-Ii E/M) Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit All As Specified And As Directed By Engr-In-Charge , (Schedule-A Part-Ii E/M) Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit All As Specified And As Directed By Engr-In-Charge
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Jammu And Kashmir View Result →
26.
Educational and Research Institute #10971037 Technical Bid
Tender for Construction Of 11 Nos. Of Acr At Upgradation H.S Chanddih (20070300901) In Deoghar District In Santhal Division Of Jharkhand. , Earthwork In Excavation In Foundation Trenches In Ordinary Soil (Vide Classfication Of Soil Item - A) And Disposal Of Excavated Earth A Obtained To A Distance Up To 50M Including All Lifts With Leveling Ramming The Foundation Trenches Removing Roots Of Trees Shurbs All Complete As Per Approved Design And Per Building Specification And Direction Of E/I. , Extra For Earth Work In Hard Soil As Per Specification And Direction Of E/I. (Vide Classfication Of Soil Item - B) , Earth Filling In Foundation Trenches And Plinth In Layer Not Exceeding 150Mm Thick Will Watered Rammed Fully Compacted And Fine Dressed With Earth Obtained From Excavation Of Foundation Trenched With A Lead Of 50Mm And Lift Of 1.5M All Complete As Per Building Specification And Direction Of E/I. (Mode Of Measurement Compacted Volume). , Providing Coarse Clean Sand In Filling In Foundation Trenches Or Plinth Including Ramming And Watering In Layers Not Exceeding 150Mm Thick With All Leads And Lifts Includng Cost Of All Materials, Labour, Rotalty And Taxes All Complete As Per Building Specification And Direction Of E/I (Mode Of Measurement Compacted Volume). , Providing Designation 75B Brick Work In C.M. (1:6) In Foundation And Plinth With Approved Quality Of Clean Coarse Sand Of F.M. 2 To 2.5 Including Providing 10Mm Thick Mortar Joints, Cost Of Screening Maerials, Raking Out Joints To 15Mm Depth, Curing, Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing Designation 100 A Brick Work With Fly Ash Lime Brick (Flag) Confirming To Is 12894-1990 (9X4.5X3) In C.M. (1:6) In Foundation And Plinth With Approved Uality Of Clean Coarse Sand Of F.M. 2 To 2.5 Including Providing 10Mm Thick Mortar Joints, Cost Of Screening Materials, Raking Out Joints To 15Mm Depth, Curing, Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing Designation 112Mm Thick Reinforcement Designtion 100 A Brick Work With Fly Ash Lime Brick (Flag) Confirming To Is 12894-1990 (9X4.5X3) In C.M. (1:4) In Supertructure With Approved Quality Of Clean Coarse Sand Of F.M. 2 To 2.5 Including Cost Of Screening Materials Scaffoliding Raking Out Joints To 15Mm Depth Curing Taxesand Royalty ( But Excluding Theb Cost Of Reinforcement) All Complete As Per Building Specification And Direction Of E/I. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) : 4 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii): 6 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level. 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii): 3 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mmnominal Size) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Laying Damp-Proof Course 50Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand(Zone-Iii) : 4 Graded Stone Aggregate 20Mm Nominal Size). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Stairs, (Excluding Landings) Except Spiral-Staircases , Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete Weather Shade, Chajjas, Corbels Etc., Including Edges , Supplying, Fitting And Fixing 20 Guage G.C.I. Sheet Gate Fitted On M.S. Angle Frame Of Size 60X60x6mm. Including Cost Of Fabrication, Providing Necessary Locking Arrangement With Haskal And Domny Duly Fixed In Plain Cement Concrete (1:2:4) Blocks Of Required Size Applying A Priming Red Lead Paint Over Steel Work, Taxes All Complete As Per Drawing Specification And Direction Of E/I. , Providing Toe Steel Reinforcement Of 8Mm Dia To 32Mm Dia Rods As Approved Design And Drawing Excluding Carriage Of M.S. Bars To Work Site, Cutting, Bending And Binding With Annealed Wire With Cost Of Wire, Removal Of Rust, Placing The Rods In Position All Complete As Per Building Specification And Direction Of E/I. Tmt Fe 500 (Only Valid For Sail & Tata Steel) 8Mm , 12Mm-25Mm , Supply/Fixing M.S. Grill Made Of 20 X 6Mm M.S. Flat As Per Approved Design And Drawing, Properly Fabricated With Joints Continous Fillet Welded And Finished Smooth, Carriage Of Grill To Work Site, Hoisting As Per Building Specification And Direction Ofe/I. (Where Materials Is Not Supplied By The Deptt.) , Providing And Fixing Fan Hooks Of 16Mm Dia M.S. Bar & 1 Meter Long, Bent Torequired Size And Shape, Placed In Position And Fixed In The R.C.C.Slab/Beam At The Time Ofcasting All Complete As Per Building Specification And Direction Of E/I. , Providing Designation 75 B One Brick Flat Soling Joints Filled With Local Sand Including Cost Of Watering Texes Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing 12Mm Cement Plaster (1:3) With Clean Coarse Sand Of F.M. 1.5 Including Screening, Curing With All Leads And Lifts Of Water, Scaffolding Taxes And Royalty All Complete As Per Specification And Direction Of E/I. , Providing 12Mm Thick Cement Plaster (1:6) With Clean Coarse Sand Of F.M. 1.5 Including Screening, Curing With All Leads And Lifts Of Water, Scaffolding Taxes And Royalty All Complete As Per Specification And Direction Of E/I. , Providing 6Mm Thick Cement Plaster (1:4) In Ceiling With Clean Of F.M. 1.5 Including Screening, Curing With All Leads And Lifts Of Water, Scaffolding Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Providing 1.5Mm Cement Punning Including Curing, Carriage Of Water With All Leads And Lifts As Per Building Specification And Direction Of E/I. , Providing Two Coat Of Oil Bound Distemper Of Approved Shade And Make Over A Primer Coat Of Cement Primer Over New Surface Including Preparing The Plastered Surface By Rubbing Smooth With Pumice Stone Or Fine Sand Paper Applying Putty Wherever Required Scaffolding, Washing Floors And Taxes All Complete As Per Building Specification And Direction Of E/I. , Providing Primer One Coat Of Red Lead Paint Of Approved Make Over New Steel Surface Including Preparing The Surface After Cleaning, Removing Dust, Dirt, Scales Smokes And Grease And Cleaning The Surface Thoroughly Including Cost Of Scaffolding And Taxes All Complete As Per Building Specification And Direction Of E/I. (Mode Of Measurement Area Shall Be Multiplied By The Co-Efficient As Indicated In Building Specificatio). , Providing Two Coats Of Synthetic Enamel Paint Of Approved Shade And Make Over Steel Surface Including Cleaning The Surface Thoroughly Cost Of Scaffolding And Taxes All Complete As Per Building Specification And Direction Of E/I. , Providing 19Mm Thick Water Proof Cement Plaster (1:3) With Clean Coarse Sand Of F.M. 1.5 With 5% Cico Or Any Other Approved Water Proofing Compound Including Screening, Curing With All Leads And Lifts Of Water, Scaffolding Taxes And Royalty All Complete As Per Building Specification And Direction Of E/I. , Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement :3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size ) Over 75Mm Bad By Dry Brick Ballast 40Mm Nominal Size Well Rammend And Consolidated And Grouted With Fine Sand Including Finishing The Top Smooth. , Extra For Providing And Placing In Position 2 Nos 6Mm Dia. M.S. Bars At Every Third Course Of Half Brick Masonry. , Supplying,Fitting And Fixing M.S. 40X40x4mm Is2062 Grade A M.S. Angle, Hoisting In Steps, Welded With 6Mm Dia And 75Mm Long M.S. Rods, Anchorage Fixed In Concrete Steps At The Time Of Casting, Including Taxes All Complete As Per Direction Of E/I. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Ofchequered Plate Wherever Required, All Complete In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. , Providing 25Mm Thick First Class Patent Stone Flooring (1:2:4) With Stone Chips In Two Layers, Bottom Layers 19Mm. Thick (1:2:4)With 12Mm To 6Mm. Size Graded Stone Chips And Top Layer 6Mm. Thicks (1:2) With 6Mm Down Stone Chips, In Panels Including Cost Of Curing, Finishing The Surface Smooth By Rubbing With Carborandum Stone, Taxes And Royality With All Complete As Per Building Specification And Direction Of E/I. , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is:13592 Type A, Including Jointing With Sea; Ring Conforming To Is:5382, Leaving 10Mm Gap For Thermal Expansion, Single Socketed Pipes , Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion. Coupler - 110Mm , Bend - 110Mm , 110 Mm , Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50x50 Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length, Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete Supplying, Fitting And Fixing Fully Glazed Steel Door, Window Or Ventilations Of Standard Rolled Z And Mullion Steel Sections And Size As Per Is-1038 Joints Met And Welded With 100X16x3mm M.S. Lugs Fixed In Cement Concrete (1:2:4) Block 15X10x10cm, Size Including Cost Of Oxidised Iron Fittings, With Hinges, Handle Per Steps, Catch Springs, 3Mm Thick Plain Glass Panes With Aluminimum Beads And Inner Frame Fixed With Lugs With 20Mm Long 6.3Mm G.I. Counter Sunk Machine Screw And Nuts And Applying A Coat Of Red Lead Paint Carriage To Work Site Hoisting And Placing In Position In All Storys And Taxes All Complete As Per Building Specification And Direction Of E/I. , Carriage Of Materials Bricks Lead = 1 K+7 P(8Km) , Fly Ash Brick - 15Km , Sand Lead = 10 Km , Stone Chips Lead = 22 Km , Stone Metal Lead = 22 Km , Local Sand Lead = 3Km , Providing And Fixing Male Ended 15Mm Dia Brass Bib Cock Of Approved Quality (Wt. Not Less Than 350 Gms.) With Extra Socket All Compere As Per Specification And Direction Of E/I. , Providing & Fixing 15Mm Size Pillar Cock C.I. Body Brass Spindle Pillar Cock Of Approved Quality As Per Specification & Direction Of E/I. , Providing And Fixing Brass/C.I. Stop Cock Of Approved Quality All Complete As Per Specification And Direction Of E/I. 15 Mm Dia , Providing And Fixing G.M. Non Return Valve Horizontal/Vertical Type Of Approved Quality As Per Specification And Direction Of E/I. Horizontal - 25 Mm Dia , Horizontal - 32 Mm Dia , Making Holes In Walls For Laying G.I. Pipe And Restoring The Same After Pipe Laying As Per Specification And Direction Of E/I. 125 Mm Thick Wall , 250 Mm Thick Wall , Supplying, Fitting And Fixing The Following Items Complete With All Materials As Per Specification And Direction Of E/I. Mirror (300 X 450Mm) , C.P. Brass Tower Rail , C.P. Brass Soap Container Medium Quality With Screw And Hinges Etc. , Supplying, Fitting And Fixing Viterious White Glazed Earthen Ware I.W.C. Of Parry Hindustan Or Any Other I.S.S. Approved Make With 100Mm H.C.I. P Trap 15 Litres C.I. Pull And Let Go Flushing Cistern Of Names Or Other I.S.S. Equivalent Make, Complete With All Fittings C.I. Or cement concrete Brackets 32Mm Alkathene/P.V.C. Telescopic Flush, Pipe About 2M Long With One Brass Coupling And Clamps G.I. Chain And Pull Including Supplying And Fixing A Pair Or Viterous White Glazed Earthenware Footrest To Be Fixed In Floor 15Mm C.I. Body Brass Spindle Stope Cock Of Weight Not Less Than Exposed Pipe And Cistern With Two Coats Of Approved Paint Over A Coat Of Red Oxide Primer Etc. All Complete As Per Specification And Direction Of E/I. 580Mm Long - With 12.5 Lit. Low Level Pvc Cistern , Supplying, Fitting And Fixing 40Mm Highb Viterous White Glazed Earthen E.W.C. With P Trap Of Parry Hindustan Or Any Other Approved I.S.S. Make Including Supplying And Fixing 15 Litres C.I. Mosquito Proof Low Down Flushing Cistern Of Approved Make With Complete Fitting With C.I. Handle And R.S. Or Bracket With Telescopic Flush Pipe With Brass Coupling And Plumbers Joints Spindle Stope Cock Of Approved Quality Weight Not Less Than 450 Grams 15Mm Pvc Alkathene Pipe 45Cm. Long With Brass Coupling At Both Ends And White/Black Plastic Soild State Seal And Lead Of Commander/Cuckoo Or Other I.S.S. Make With Hinges Or Screws Etc. Painting Pipe And Cistern Etc. With 2 Coats Of Approved Paint Over A Coat Of Red Oxide Priming All Complete As Per Specification And Direction Of E/I. With P Trap - 12.5 Lit Low Level Pvc Cistern , Supplying, Fitting And Fixing Flat Back Or Angular, Lipped Front Viterous White Glazed Earthen Ware Urinal Of Hindustan Parry Or Any Other Approved I.S.S. Make With 5 Liters Capacity C.I. Automatic Flushing Cistern Of Reliance For Any Other I.S.S. Approved Make With All Fittings With C.I. Or R.S., Brackets, Standard Size G.I. Flush Pipe With Fitting Clamps, 15Mm, C.I. Body Brass Spindle Stop Cock Of Approved Quality Weight Not Less Than 400 Grams, 15Mm P.V.C./Alkthene Pipe 450Mm Long With Brass Coupling At Both Ends And Doing Plumber Joints Including Painting Coat Of Red Oxide Cutting Wall And Floor Making Good The Same Etc. All Complete As Per Specification And Direction Of E/I. (A)Flat Back Or Standing Cornar , Supplying, Fitting And Fixing Viterous White Glazed Earthen Ware Wash Hand Basin Of Parry Or Hindustan Or Any Other I.S.S. Approved Make Supported On Pointed C.I. Or R.S. Brackets 32M C.I. Brass Waste 15Mm Dia C.I. Body Brass Spindle Stop Cock Of Approved Quality Of Weight Not Less Than 350Grms. 32Mm P.V.C. Waste Pipe 750Mm Long With Brass Coupling At One End And Making Plumber Joints Etc. All Complete As Per Specification And Direction Of E/I. , Supplying Np2 Reinforced Cement Concrete Hume Pipe With Colour As Work Site As Per Direction Of E/I. 150Mm Dia , Approved Basic Rates Construction Materials For Preparation Of Schedule Of Rates Only, (Material Should Conform To Relevent B.I.S. Specification). The Rates Are Inclusive Of All Taxes, Royalty, Cess And Carraige But Exclusive Of Contractors Profit And Overhead Charges - Special Type Of C.P. Bath Room Fitting For V.I.P. Buildings (Jal, Jaguar, Marc Or Equivalent Mark) Angular Stopcock /2 Way Bib Cock , Telephonic Shower Flexible Pipe , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 75 Mm Diameter , 110 Mm Diameter , Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/ Accessories For Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion. Single Tee Without Door - 75X75x75 Mm , Single Tee Without Door - 110X110x110 Mm , 75 Mm Bend , 110 Mm Bend , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall 25 Mm Nominal Outer Dia Pipes , 32 Mm Nominal Outer Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 15 Mm Nominal Outer Dia Pipes , 20 Mm Nominal Outer Dia Pipes , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Waterstorage Tank, Isi : 12701 Marked, With Cover And Suitable Lockingarrangement And Making Necessary Holes For Inlet, Outlet And Overflowpipes But Without Fittings And The Base Support For Tank. , Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Point Wiring In Pvc Conduit, With Modular Type Switch - Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sq.Mm. Fr Pvc Insulated Copper Conductor Single Cable In Surface/Recessed Pvc Conduit, With Modular Type Switch, Modular Plate, Suitable Size G.I. Box Etc. As Required. Group A , Twin Control Point Wiring In Pvc Conduit, With Modular Type Switch: Wiring For Twin Control Light Point With 1.5 Sq.Mm Fr Pvc Insulated Copper Conductor Single Core Cable In Surface/Recessed Pvc Conduit, 2 Way Modular Type Switch, Modular Plate, Suitable Size Of Gi Box Etc As Required. , Circuit/Sub-Main Wiring In Pvc Conduit:- Wiring For Circuit / Sub-Main Wiring Along With Earth Wire With The Following Sizes Of Pvc Insulated, Copper Conductor, Single Core Cable In Surface/Recessed Pvc Conduit As Required. 2X1.5 Sqmm + 1X1.5 Sqmm Earth Wire , 2X2.5 Sqmm + 1X2.5 Sqmm Earth Wire , Supply/Fixing Modular Type Switch Socket - Supplying And Fixing Following Modular Switch/Socket On The Existing Modular Plate And Switch Box Including Connection But Excluding Modular Plate Etc. As Required 5/6 Amps, One Way Switch , 3 Pin 5/6 Amps, Socket Outlet , Supply/Fixing Modular Type Electronic Fan Regulator:- Supplying And Fixing Stepped (Two Module) Type Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc As Required. , Supply/Fixing Light Plug Point With Modular Type Accessories - Supplying And Fixing Suitable Size G.I. Box With Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 3 Pin, 5/6 Amps Modular Socket Outlet And 5/6 Amps Modular Type Switch Connection, Painting Etc. As Required . (For Light Plugs To Be Used In Non Residential Buildings) , Supply/Fixing Power Plug Point With Modular Type Accessories:- Supply And Fixing Gi Box With Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 6 Pin, 15/16 Amps Modular Socket Outlet And 15/16 Amps Modular Type Switch, Connection, Painting Etc As Required. , Supply/Fixing Ceiling Rose:- Supplying And Fixing 2 Pin Ceiling Rose On The Existing Junction Box/ Wooden Block Including Connection Etc As Required. , Supply/Fixing Batten / Angle Holder:- Supplying And Fixing Batten / Angle Holder Including Connection Etc As Required. , Supplying And Fixing Following Way Single Pole Neutral, Sheet, Mcb Disrtibution Board, 240 Volts, On Surface/Recess, Complete With Tinned Copper Busbar, Neutral Busbar, Earth Bar, Din Bar, Detachable Gland Plate, Interconnections, Phosphatized And Powder Painted Including Earthing Etc. As Required (But Without Mcb/Rccb/Isolator) 8 Way, Single Door , Supplying And Fixing 6 Amps To 32 Amps Rating, 240 Volts, B Series, Miniature Circuit Breaker Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commossioning Etc. As Required. 6/32, Single Pole, B Series , Supply/Fixing Dp Mcb Isolator - Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required 40 annual periodical maintenance , 63 annual periodical maintenance , G.I. Earth Electrode With Salt/Charcoal - Earthing With G.I. Earth Pipe 4.5 Mtr. Long, 40Mm Dia Including Accessories, And Providing Masonary Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal And Salt As Required , providing and Fixing G.I. Lightning Conductor Finial - Providing And Fixing Of Lightning Conductor Finial, Made Of 25Mm Dia 300Mm Long, G.I. Tube, Having Single Prong At Top, With 85Mm Dia 3Mm Thick G.I. Base Plate Including Holes Etc. Complete As Required. , S/L 8 Swg Copper Wire In Ground - Supplying And Laying 8 Swg Copper Wire At 0.50 Metre Below Ground Level For Conductor Earth, Including Soldering Etc. As Required , Supplying Pvc/Xlpe Insulated Pvc Sheathed, Heavy Duty, Armoured Electrical Cable With Aluminium Conductor- 3.5 Core, 50 Sq.Mm , Supplying And Fixing Of 9/10 Watt Led Bulb , Supplying And Fixing Led Batten (20/22W) , Supply And Installation Of Ceiling Fan 48 (1200Mm) , Supply Of 12 (300Mm) Metal Exhaust Fan , Labour Cess
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
27.
Defence #10969895 Price Bid
Tender for Dismantling Water Tanks Exc 500 Ltr But Not Exc 1000 Ltr And Removing To Store Or Issued To Contracror Under Sch Of Credit Complete All As Specified And Directed. , Taking Up Or Down 25 Or 32 Mm Dia Steel Tubing And Connections, Including Cleaning For Refixing Or Removal To Store Complete All As Specified And Directed. , Taking Down Shutters Of Any Description Exc 2 Sqm Of Doors Each Complete All As Specified And Directed. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. , Demolition Of Cement Concrete (Un-Reinforced) In Ground Floors And Pavings N Exc 15 Cm Thickness (Below Or Above Ground Levelr All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) Of Any Description And In Any Position Not Otherwise Specifically Provided For All As Specified And Directed. , Dismantling Of Plain Or Corrugated Steel Sheeting Any Gauge, Thickness As In Roof Covering Complete All As Specified And Directed , Use And Waste Flat Form Work To Vertical Faces Of Drain/Retaining Wall And Similar Work . , Taking Down Chowkats Or Frames With Shutter (Without Taking Off Shutter From The Frame) Not Exc 1.50 Sqm Each Including Iron Mongeries Complete All As Specified And Directed. , Material And Labour For Providing Cement Concrete 1:2:4 Type B-1 Using 20 Mm Graded Aggregate ) In Plinth Walls Or Retaining Walls,Drain Walls, Any Thickness, Size Or Shape Including Pilasters, Buttresses Columns, Pillars, Boundary Pillars And Posts (Including Caps And Bases) , M&L For Cement Concrete Type B-2, 1:2:4 (Using 40Mm Graded Agg) As In Surface Channels And Drains Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms, Moulds, Mi- Tred/Stopped Ends Etc , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of M.S. Tubes For Top & Bottom Rails. M.S. Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail; Panelling Of Plain Colour Pvc Sheet To Be Fitted In The M.S. Frame Welded / Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Suppling & Fixing In The Frame At Site As Per Specification & Drawing. Complete All As Specified And Directed By Engr-In-Charge. , S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawing Complete All As Specified And Directed By Engr-In-Charge. , Supply And Fix 30Mm Thick Single Piece, Coloured Abc (Acrylonitrile Brutadine Styrene) Coated, Puf Filled Door Shutters With Puf (Poly Urethanefoam) Insulation Of Minimum Density 40 Kg/Cum Filled In Between Two Abs Sheets Of Thickness 1.2Mm (Min), Border Covered With Insitu Pasted Abs Strips Of Width Equal To Thickness Of Door Shutters, 1.2Mm Thickness, Reinforced With Two Number 10Mm Ctd Bars, PreEmbedded With Wooden Blocks Of Suitable Sizes For Receiving Hinges, Tower / Sliding Bolts, Towel Rails, Handles Etc, With/Without Embossed Pattern Completed All As Specified And Directed. , S&F 150Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 300Mm Mild Steel Sliding Door Bolts, Plate Type, Stove Enamelled Black, With Bright Bolt Not Less Than 12Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F Galvanised Mild Steel Wire Cloth, 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18Mm And Fixed With Tinned Tacks, Or Galvanised Wire Staples , S&F Powder Coated Anodised Aluminium Frame For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified , S&F Powder Coated Anodised Aluminium Window And Ventilator Shutters Powder Coated (Min Thickness 50 Micron), Fixed Type Without Sash Bar, Aluminium Section Weighing 0.55 Kg/M Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws Etc. Complete All As Specified , M&L For Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified , M&L For Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified , S&F Tank Connector With All Fitting Suitable To 32Mm Dia Ppr Pipe Complete All As Specified And Directed. , S&F In Repair 32Mm Dia Waste Pipe For Whb/Sink Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Angle Valve, Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle And Fixedcomplete All As Specified And Directed. , M&L For 75Mm Thick Plain Cement Concrete Type C-2, 1:3:6 (Using 40Mm Graded Stone Agg) As In Plinth Protection Complete All As Specified And Directed. , M&L For 40 Mm Thick Plain Cement Concrete Type B-1, 1:2:4 (Using 20Mm Graded Stone Agg) As In Sub Base, Floors And Pavings Complete All As Specified And Directed. , M&L For Non-Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square/Rectangular) Area Of Each Tile Exc 0.06 Sqm But Not Exc 0.11 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Joint Free Non - Skid Coloured Ceramic Tiles 7 To 8 Mm Thick Area Of Each Tile Exc 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed. (Note: Colour And Pattern Of Tile Will Be Decided By Ge/ Engr-In-Charge. Contractor Will Brought The Tiles Only After Approval Of Colour And Pattern By Ge/Engr-In-Charge). , M&L For Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces With Cm 1:4 Complete All As Specified. , M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. , M&L For Preparing Plastered Or Unplasterd Newly Surface Of Any Description With Three Coat Of White Wash On Walls Surfaces. , Supply And Fix Sheet Glass 4Mm Thick Ordinary Quality And Glazing With Oil Putty In Squares N.Exc 0.50 Sqm In Each Pane, Complete All As Specified And Directed. , M&L For Preparation Of Old Steel Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , S&F 32Mm Dia 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or Infloors Etc. Complete All As Specified And Directed. , S&F 25Mm Dia 3-Layer Pp-R Polypropylene Random Copolymer) Concealed Pipes Sdr 7.4 (Pn16) Uv Stabilized And Antimicrobial Fusion Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded Polypropylene Random Fittings Fixed Complete To Walls, Ceilings Or In Floors Etc. Complete All As Specified And Directed. , S&F 32Mm Dia Pp-R Gate Valves (Brass Insert) As Per Requirement Of The Site Complete All As Specified And Directed. , S&F 750 Ltrs Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Complete All As Specified And Directed. , S&F 1000 Ltrs Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Fancy Type Bib Taps, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule And Fixed Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Pillar Taps, Cast Copper Alloy, With Capstan Heads, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe And Fixed Complete All As Specified And Directed. , S&F Waste Coupling Of Ptmt (Half Or Full Threaded) (Minimum Weight 32Mm - 45Gms/40Mm-60 Gms) Complete All As Specified And Directed. , S&F Repairs Grating Doom 100Mm Dia Of Ptmt (Minimum Weight 25Gms) Complete All As Specified And Directed. , S&F In Repair Pvc Connections 15Mm Size With Ptmt Nuts Of Length 600Mm Complete All As Specified And Directed. , S&F In Repairs Vitreous China Squatting Pan, ‘Orissa Pattern, Size 580 X 440 Mm White, With Integral Foot Rests (Excluding Flushing Cistern And Flush Pipe) Squatting Pan Including Connection To Trap, And To Flushing Pipe, Anti-Syphonage Pipe, Etc. Complete Including Making Good To Floor Complete All As Specified And Directed. , S&F In Repairs Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Bracket High Or Low Level Fluslhing Cistern (Exclusive Of Brackets), And Connections To Pipes And Fixing Of Chain And Pull, Or Lever, If Any Complete All As Specified And Directed. , S&F In Repairs Vitreous China Wash Basin, White, Flat Back, Size 550X400mm Excluding Taps, Waste, Chain And Plugs But Including Brackets Complete All As Specified And Directed. , Supply & Fix Aluminium Anodised Barrel Tower Bolt 150 Mm Long Of Extruded Section Etc Complete All As Specified And Directed. , Supply & Fix Aluminium Alloy, Anodised, Sliding Door Bolts 250Mm Size With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheets , Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Section Or Cast Aluminium Alloy And Fixed Etc Complete All As Specified And Directed. , Supply And Fix Ms Butt Hinges Medium Weight, Cold Rolled 100Mm Size Complete All As Specified And Directed. , Supply & Fix Extruded Aluminium Anodised Alloy Handles Fabricated Type 150Mm Long Complete All As Specified And Directed. , Taking Down Copper/Aluminium Point Wiring (Light, Fan, Socket Or Power) Complete, Including Fixture And Fittings Such As Switches, Ceiling Roses, Pendants, Regulators, Sockets, Light Fitting Etc. Removing Materials To Store For Keeping In Safe Custody Or For Taking Credit (Credit For Above Items Should Be Made As Per Conditions Separately) And Making Good Disturbed Surfaces Of Walls, Floors, Etc. , M/L For Point Wiring In Casing Caping With 1.5Sq Mm Frls Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Casing Caping With Its Accessories Pressed Steel Terminal Box Incl 3Mm Thick Isi Marked Laminated Sheet Cover For Fixing Switches/Socket/Regulators Etc For The Following: -One Light/Fan Point Controlled By One No Piano Type Switch 5 Amps Single Pole One Way , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On The Same Board. , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On Independent Board. , All As Per Item No 1 Above But One 3 Pin Socket Out Let 15/16 Amps With Three Nos Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase, Neutral & Earth Continuity Conductor. , S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. , S&F Switch Socket Combination 2 In 1, 3 Pin, 6 And 16 annual periodical maintenance Flush Type Universal , S&F Switch Socket Combination 2 In 1, 6A Flush Type , S&F Socket Outlett 2 In 1, 3 Pin, 6A Flush Type , S&F Ceiling Rose Surface Bakelite 65Mmx50mm 100Watt Three Terminal. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 4 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , M&L For Sub Main Wiring With Two Single Core Pvc Insulated Of Size 6 Sqmm Frls Unsheathed Copper Conductor 1100 Volt Grade Multistandard And Incl Drawn Through And Including Pvc Casing Caping Including 6.0 Sqmm Frls Copper Wire For Earth Continuity Wire And Connected Of Common Earth Dolly Including Taking Down Old Unserviceable Sub Main Wiring And Making Good Of Existing Surface. Note:- (I)One Run Of Pvc Casing Caping, Two Run Of 6 Sq Mm Copper Conductor & One Run Of 6.0 Sq Mm Copper Conductor Is Measured As One Unit. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 8 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , S&F Mcb Spn 32 Amps 240 Volts C Series, 10 Ka, 50 Hz. Make:- Havells, Legrand, Indo Asian , S&F Mcb Sp 5 To 32 Amps 240 Volts C Series, 10 Ka, 50 Hz Including Connection In The Db And Testing/Commissioning. Make:- As Approved Make Of Db , Supply And Fixing Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. , Supply And Fixing Led Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete. , Supply And Laying Or Fixing Or Passing Through Pipe, 1100 Volts Grade Heavy Duty Cable With Pvc Insulated Aluminium Conductor Served With Aninner Sheathing Of Pvc Tape Armoured With Galvanised Steel Wire Or Tape And Overall Pvc Sheathed 6 Sq. Mm Nominal Cross Section In Service Connections , Supply And Fix Exhaust Fan Made Of Sturdy Engineering Plastic Complete With Louvers Shutter, Voltage 230V, 50 Hz, Rpm 1200, Copper Winding Of Sweep 300M Complite All A Specified And As Directed By Engineer-In-Charge. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 10 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , S&F Dwc Pipe 63/50Mm Size All As Specified And Directed By Engr-In-Charge. , M&L For Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation Of Poles, Etc. Or For Laying Of Cable, Pier Holes, Etc. Nexc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Soft And Loose Soil , M&L For Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Of Hard & Dense Soil , M&L For Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Of Any Type Of Soil , Material And Labour For Earthing Complete With Galvanized Steel Earth Plate Electrode 600 X 600 X 6 Mm Thick Buried Directly In Ground( Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level) With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level, Connected To Galvanised Earth Lead Wire 4.0Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron Or Steel, All As Shown In Electrical Plate No 3 Of Ssr Pt I Including Necessary Excavation And Earth Work Plain Cement Concrete (1:3:6) Type C-1 With 50 Mm Thick Pre Cast Reinforced Cement Concrete ( 1:2:4) Type B-1 Cover Slab Framed With 50X30x4 Mm Ms Angle (Reinforced With 6 Mm Dia Deformed Bar @ 15 Cm C/C Both Ways And Suitable Handle Of 10 Mm Dia Round Bar) Including Providing Charcoal Or Coke And Magnesium Sulphate In Alternate Layers Of 15 Cm Compacted Thickness All Around The Earth Electrode, With Funnel And 20 Mm Bore Galvanized Iron Watering Pipe (Medium Grade) Wire Mesh, Copper Lugs, Complete In All Respect., Gi Earth Wire Protected By 40 Mm Bore (Light Grade) Galvanized Iron Pipe And Other End Connected To The Earth Bar (Test Point) Made Of Ms Flat (400X32x6 Mm) Bend In ‘D Shape And Fixed To Wall By Means Of Fast Nut Or Bolt Grouted In To Wall At 1 Mtr From Plinth Height. 4Sqmm Pvc Insulated (Colour Green) Copper Conductor Single Run As Earth Continuity Conductor Along With 15 Mm Pvc Conduit Grouted In Wall Or Fixed On Wall Surface To Be Continued Up To Main Switch Board And Fix With Common Earth Dolly As Directed By Eic . Disposal Of Soil To A Distance Not Exceeding 50 Mtr And Necessary Testing On Completion Complete Including Taking Out Old Unserviceable Earthing Materials All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
28.
Power #10907633 AOC
Construction Of New Test Lab Building At 33/11 Kv Sub Centre, Fatehabad And Other Related Civil Works. - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: (DSR 2.1) All kinds of soil (DSR 2.1.1) 2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. (DSR 2.6) All kinds of soil (DSR 2.6.1) 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(DSR 2.8) All kinds of soil. (DSR 2.8.1) 4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. (DSR )(DSR 2.25) 5 Excavating, supplying, stacking and filling of local earth (excluding royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. NSI Based on(DSR 2.25(a)) 6 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. (DSR 2.26) All kinds of soil (DSR 2.26.1) 7 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (DSR 2.28) All kinds of soil (DSR 2.28.1) 8 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m. (DSR 2.3) All kinds of soil (DSR 2.30.1) 9 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (DSR )(DSR 2.31) 10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.2) 11 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.1.3) 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (DSR 4.1) 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR 4.1.8) 13 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR 4.2.2) 14 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: (DSR 4.2) 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 4.2.3) 15 Centering and shuttering including strutting, propping etc. and removal of form work for : (DSR 4.3) Foundations, footings, bases for columns (DSR 4.3.1) 16 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) (DSR ) (DSR 4.10) 17 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturers specification. (DSR )(DSR 4.12) 18 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (DSR 5.1) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.1.2) 19 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (DSR 5.2) 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR 5.2.2) 20 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.3) 21 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Suspended floors, roofs, landings, balconies and access platform (DSR 5.9.3) 22 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Shelves (Cast in situ) (DSR 5.9.4) 23 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR 5.9.5) 24 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Columns, Pillars, Piers, Abutments, Posts and Struts (DSR 5.9.6) 25 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Stairs, (excluding landings) except spiral-staircases (DSR 5.9.7) 26 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Small lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like (DSR 5.9.15) 27 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Edges of slabs and breaks in floors and walls 5.9.16 Under 20 cm wide (DSR 5.9.16.1) 28 Centering and shuttering including strutting, propping etc. and removal of form for (DSR 5.9) Weather shade, Chajjas, corbels etc., including edges (DSR 5.9.19) 29 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.12) 30 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR )(DSR 5.13) 31 Providing, transporting, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR )(DSR 5.15) 32 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. (DSR 5.22) Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR 5.22.6)/ (DSR 5.22A.6) 33 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) 34 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (DSR 6.1) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.1.2) 35 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.4.1) 36 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (DSR 6.4) Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 6.4.2) 37 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. (DSR 6.13) Cement mortar 1:4 (1 cement :4 coarse sand) (DSR 6.13.2) 38 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab upto 0.50 sqm (DSR 8.2.1.1) 39 (DSR 8.2) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1 Area of slab over 0.50 sqm (DSR 8.2.1.2) 40 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (DSR 8.3) Granite work (DSR 8.3.2) 41 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. (DSR )(DSR 8.4) 42 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (DSR )(DSR 8.5) 43 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. (DSR )(DSR 8.6) 44 Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : (DSR 8.14) Red sand stone - exposed face fine dressed with rough backing. 8.14.1 30 mm thick (DSR 8.14.1.5) 45 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : (DSR 8.28) Decorative veneer facings of approved manufacture (DSR 8.28.1) 46 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 18 mm thick (DSR 8.30.1) 47 Providing and fixing skirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : (DSR 8.3) 25 mm thick (DSR 8.30.2) 48 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR )(DSR 8.31) 49 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). (DSR 9.1) Sal wood (DSR 9.1.2) 50 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 35 mm thick shutters (DSR 9.5.1.1) 51 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) (DSR 9.5) Second class teak wood 9.5.1 30 mm thick shutters (DSR 9.5.1.2) 52 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : (DSR 9.7) Second class teak wood (DSR 9.7.1) 53 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 35 mm thick (DSR 9.9.1.1) 54 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (DSR 9.9) Second class teak wood 9.9.1 30 mm thick (DSR 9.9.1.2) 55 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) (DSR 9.11) 5.0 mm thick(weight not less than 12.50 kg per sqm) instead of 4 mm thick(weight not less than 10 kg per sqm). (DSR 9.11.1) 56 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick(weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). (DSR )(DSR 9.12) 57 Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). (DSR )(DSR 9.14) 58 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Panelled or panelled & glazed shutters : 9.16.1 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.1.2) 59 Providing and fixing 25 mm thick shutters for cup board etc. : (DSR 9.16) Glazed shutters : 9.16.2 Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (DSR 9.16.2.2) 60 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 12 mm thick (DSR 9.17.1) 61 Providing and fixing flat pressed three layer particle or gradedplain wood board medium density exterior grade (Grade I) FPT-I, conforming and markedto frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): (DSR 9.17) 18 mm thick (DSR 9.17.2) 62 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (DSR 9.21) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.2) 63 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : (DSR 9.4) Kiln seasoned and chemically treated hollock wood 9.40.2 50x12 mm (DSR 9.40.2.1) 64 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : (DSR 9.47) 25 mm dia (heavy type) (DSR 9.47.2) 65 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (DSR 9.48) Fixed to steel windows by welding (DSR 9.48.1) 66 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 125x65x2.12 mm (DSR 9.57.1) 67 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 100x58x1.90 mm (DSR 9.57.2) 68 Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) (DSR 9.57) 75x47x1.70 mm (DSR 9.57.3) 69 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.62) 250x16 mm (DSR 9.62.2) 70 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 200x10 mm (DSR 9.63.2) 71 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.63) 150x10 mm (DSR 9.63.3) 72 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 125 mm (DSR 9.66.1) 73 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 100 mm (DSR 9.66.2) 74 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) (DSR 9.66) 75 mm (DSR 9.66.3) 75 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR )(DSR 10.1) 76 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. (DSR 10.15) Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) (DSR 10.15.2) 77 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (DSR 10.16) Electric resistance or induction butt welded tubes (DSR 10.16.3) 78 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. (DSR )(DSR 10.17) 79 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. (DSR )(DSR 10.18) 80 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR 10.25) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR 10.25.2) 81 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR )(DSR 10.28) 82 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. (DSR 10.29) Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides (DSR 10.29.2) 83 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : (DSR 10.3) 4.0 mm thick glass panes (DSR 10.30.1) 84 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. (DSR )(DSR 11.2) 85 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. (DSR 11.3) 40 mm thick with 20 mm nominal size stone aggregate (DSR 11.3.1) 86 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (DSR 11.26) 25 mm thick (DSR 11.26.1) 87 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR )(DSR 11.27) 88 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR )(DSR 11.37) 89 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. (DSR 11.41) Size of Tile 600x600 mm (DSR 11.41.2) 90 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (DSR 11.48) Size of Tile 600x600 mm (DSR 11.48.2) 91 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (DSR 12.41) 110 mm diameter (DSR 12.41.2) 92 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 75 mm (DSR 12.42.1.1) 93 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. (DSR 12.42) Coupler 12.42.1 110 mm (DSR 12.42.1.2) 94 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. (DSR 11.56) Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent (DSR 11.56.1) 95 Providing & fixing at all heights, levels and locations Mill finish Aluminium alloy roofing sheets of alloyIS designation31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately). (DSR 12.64) 0.56 mm, Aluminium troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. (DSR 12.64.1) 96 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:4 (1 cement: 4 coarse sand) (DSR 13.4.1) 97 12 mm cement plaster of mix :CEMENT PLASTER (IN COARSE SAND) (DSR 13.4) 1:6 (1 cement: 6 coarse sand) (DSR 13.4.2) 98 15 mm cement plaster on rough side of single or half brick wall of mix:CEMENT PLASTER (IN COARSE SAND) (DSR 13.5) 1:4 (1 cement: 4 coarse sand) (DSR 13.5.1) 99 15 mm cement plaster on rough side of single or half brick wall of mix:CEMENT PLASTER (IN COARSE SAND) (DSR 13.5) 1:6 (1 cement: 6 coarse sand) (DSR 13.5.2) 100 12 mm cement plaster finished with a floating coat of neat cement of mix : (DSR 13.7) 1:4 (1 cement: 4 fine sand) (DSR 13.7.2) 101 6 mm cement plaster of mix : (DSR 13.16) 1:3 (1 cement : 3 fine sand) (DSR 13.16.1) 102 Neat cement punning. (DSR )(DSR 13.18) 103 Pebble dash plaster upto 10 m height above ground level with a mixture of washed pebble or crushed stone 6 mm to 12.5 mm nominal size, dashed over and including fresh plaster in two layers under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. (DSR ) (DSR 13.20) 104 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. (DSR )(DSR 13.21) 105 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : (DSR 13.41) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre (DSR 13.41.1) 106 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.46) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR 13.46.1) 107 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR )(DSR 13.80) 108 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturerincluding applying additional coats wherever required to achieve even shade and colour(DSR 13.81) Old work (one or more coats) (DSR 13.81.1) 109 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR )(DSR 13.88) 110 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR )(DSR 13.91) 111 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (DSR 13.99) One or more coats on old work (DSR 13.99.1) 112 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR 13.111.1) 113 Finishing walls with Acrylic Smooth exterior paint of required shade : (DSR 13.111) Old work (One or more coat applied @ 0.90 ltr/10 sqm). (DSR 13.111.2) 114 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (DSR 14.5) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (DSR 14.5.1) 115 Renewal of old putty of glass panes (length) (DSR )(DSR 14.9) 116 Disconnecting damaged overhead/terrace PVC water storage tankof any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. (DSR )(DSR 14.79) 117 Providing & fixing White vitreous china water closet squatting pan (Indian type) along withS or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (DSR 14.8) Orissa pattern W.C Pan of size 580x440 mm (DSR 14.80.2) 118 DismantlingW.C.Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (DSR )(DSR 14.82) 119 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (DSR 15.2) Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) (DSR 15.2.2) 120 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (DSR )(DSR 15.3) 121 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (DSR 15.7) In cement mortar (DSR 15.7.4) 122 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): (DSR 15.8) From brick work in cement mortar (DSR 15.8.3) 123 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : (DSR 15.12) Of area 3 sq. metres and below (DSR 15.12.1) 124 Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. (DSR )(DSR 15.19) 125 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : (DSR )(DSR 15.24) 126 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: (DSR 15.28) G.S. Sheet (DSR 15.28.1) 127 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR )(DSR 15.52) 128 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR )(DSR 15.56) 129 Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars. (DSR )(DSR 15.58) 130 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR )(DSR 15.60) 131 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. (DSR )(DSR 16.42) 132 Extra for providing and mixing hardening compound of approved quality as per manufacturers specification in cement concrete. (DSR )(DSR 16.44) 133 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) (DSR )(DSR 16.53) 134 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (DSR )(DSR 16.68) 135 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. (DSR 16.7) Made of G.I. wire of dia 4 mm (DSR 16.70.1) 136 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). (DSR )(DSR 16.75) 137 Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement. (DSR )(DSR 16.76) 138 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (DSR 16.78) With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 (DSR 16.78.2) 139 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. (DSR 16.91.1) 140 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed ofsand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. (DSR 16.91) 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. (DSR 16.91.2) 141 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (DSR 17.1) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR 17.1.1) 142 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a)White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (DSR )(DSR 17.7A) 143 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : (DSR 17.25) Flat back wash basin of size 550x400 mm (DSR 17.25.2) 144 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR 17.28) Semi rigid pipe 17.28.1 32 mm dia (DSR 17.28.1.1) 145 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR )(DSR 17.31) 146 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. (DSR 17.69) Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (DSR 17.69.1) 147 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(Concealed work, including cutting chases and making good the walls etc.) (DSR 18.8) 20 mm nominal dia Pipes (DSR 18.8.2) 148 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.(External work) (DSR 18.9) 25 mm nominal dia Pipes (DSR 18.9.3) 149 Providing and fixing brass bib cock of approved quality : (DSR 18.15) 20 mm nominal bore (DSR 18.15.2) 150 Providing and fixing brass stop cock of approved quality : (DSR 18.16) 20 mm nominal bore (DSR 18.16.2) 151 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 25 mm nominal bore (DSR 18.17.1) 152 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 20 mm nominal bore (DSR 18.17.1A) 153 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : (DSR 18.17) 32 mm nominal bore. (DSR 18.17.2) 154 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 30 cm length 18.21.1 20 mm nominal bore (DSR 18.21.1.2) 155 Providing and fixing uplasticised PVC connection pipe with brass unions : (DSR 18.21) 45 cm length 18.21.2 20 mm nominal bore (DSR 18.21.2.2) 156 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR )(DSR 18.48) 157 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (DSR )(DSR 18.65) 158 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : (DSR 19.5) 100 mm diameter (DSR 19.5.1) 159 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.1.1) 160 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.1.2) 161 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For fixed portion 21.1.1 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.1.3) 162 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) (DSR 21.1.2.1) 163 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR 21.1.2.2) 164 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : (DSR 21.1) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2 Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) (DSR 21.1.2.3) 165 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) (DSR 21.3.1) 166 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (DSR 21.3.2) 167 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (DSR 21.3) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) (DSR 21.3.3) 168 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With stainless steel cover plate minimum 1.25 mm thickness (DSR 21.4.1) 169 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. (DSR 21.4) With brass cover plate minimum 1.25 mm thickness (DSR 21.4.2) 170 Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately). (DSR )(DSR 21.5) 171 Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge. (DSR )(DSR 21.6) 172 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR )(DSR 21.18) 173 Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq mm frls pvc insulated copper conductor single core cable in surface /recessed medium class pvc conduit , with modular switch ,modular plate, suitable GI box and earething the pint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (DSR E&M 1.10)Group A (DSR E&M 1.10.1) 174 Wiring for light/power plug with 2x4 sq. mm FRLS PVC insulatted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (DSR E&M 1.12) 175 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x2.5sq. Mm + 1x2.5 sq. mm eartrh wire (DSR E&M 1.14.2) 176 Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (DSR E&M 1.14) 2x4sq. Mm + 1x4 sq. mm eartrh wire (DSR E&M 1.14.3) 177 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (DSR E&M 1.21) 25mm (DSR E&M 1.21.2) 178 Supplying and fixing 6way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240V, on Surface/recess,complete with tinned copper bus bar, heutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But with MCB/RCCB/Isolator) (DSR E&M 2022 2.3.1) 179 Supplying and fixing 5 amps to 32 amps rating,Single pole, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR E&M 2022 2.10.1) 180 Supplying and fixing 63 amps, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(DSR E&M 2022 2.12.2) 181 Earthing with G.I earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (DSR E&M 2022 5.2) 182 Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required (DSR E&M 2022 19.1) 183 Concrete with 4cm gauge I class brick ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) 184 Concrete work with 40 mm gauge brick ballast obtained from breaking brick bats (brick bats supplied by the department free of cost) in proportion of 12:6:1 as in CSI no. 5.01 including cost of all labour, materials, T&P etc required for proper completion of work. (CSI No. 5.20) 185 Brick work in foundation & plinth with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.18) 186 Brick work in Super structure with old dismantled bricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5 mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.19) 187 S/F welded wire mesh size 75x25mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded as required including cost of drilling holes, washer welding etc as required including cost of all material, labour and T&P etc. required for proper completion of work . exept cost of M.S angle and flat. (CSI No. 9.22) 188 Providing and laying SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.29 c) 110 mm dia 189 Supply and fixing of power plug with 15A/250 voltflushtype switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mmsize with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. 2018 PWD 1139 190 Supply and fixing ofLED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. 2018 PWD 1413(A)CAT AA 191 S/F of LED Bulb 9Watt bajaj or equivalent make as approved sample and make as per direction of Engineer in charge (NSI) 192 S/F of 07 Watt LED bulb Syska or other equivalent make including cost of labour, T&P etc required for proper completion of the work (NSI) 193 Providing and lowering of 32 mm dia. uPVC column pipe Finolex/Ashirwad or equivalent make with column coupling socket etc. including cutting the pipe of required length, proper jointing the same including cost of all materials, labour, T&P etc required for proper completion of work.(NSI) 194 Supply and fixing support clamps for 32mm dia column pipes made out of MS flats, pairs of bolt-nuts etc complete with all material, labour, T&P. (CSI No. 19.24 e) 195 Supply & installation of electrical control panel of L&T / Havells or equivalent make for 1.5/2.00 pump set single phase submersible pump / pumpset containing contractor relay condenser. (CSI No. 19.31b) 196 Supply & Installation of 2.00 HP outlet 40mm dia. or more, Head 89/45, Discharge 2000/6000 LPH submersible pump of K.S.B/ CALAMA. or eqt. make including cost of labour, T&P and material required for completion of work. (CSI No. 19.32c) 197 Supply and fixing of 2.5 mm2 for pump above 1 HP and up to 3 HP submersible cable Havels or equivalent make, for submersible pump complete in all respect. (CSI No. 19.33b) 198 Supply & fixing of steel wire rope for submersible pump including cost of labour, T&P and material required for completion of work. (CSI No. 19.34) 199 Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost when steel is to be provided by the department. (CSI No. 9.02) 200 Supply and fixing CP Nahani Trap India make of heavy approved quality complete with CI grating, including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21b) as above but for 100 mm.PVC trap. 201 Providing and fixing CI GRATING 100 mm dia including all materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25) 202 Providing and fixing 15 mm thick Industrial tiles size 600 x 600 mm to of Johnson Endura Meteor or approved make and colour using in different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete(NSI) 203 Providing and fixing 12 mm thick Industrial tiles size 300 x 300 mm or more of Kajaria or approved make and colour using in different sizes (thickness to be specified by the manufacturer) conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (NSI) 204 Water proofing treatment over Roof, wall, Chajjas, Balcony etc. with Engineer Plus 7 layer waterproofing system at leakage, seepage area consisting of Surface preparation roughening of surface, opening of cracks in V groove in size of 5 mm to 10 mm width, Back filling of cracks with SBR Latex, 2 layer Spraying Mixture of Aquasil-99 and Aquaprime-99 (Take 20 liter clean water+ 1 liter Engineer Plus Aquasil-99 + 2 liter. Engineer Plus Aquaprime-99 in proportion 20:1:2 This solution should not sprayed over more than 40 sqm area, 3rd Laying 90GSM fiber glass mesh with proper overlap, 4th coat of brushable mortar prepared with Engineer Plus Aquaprime-99, water & cement (Aquaprime -99 @ 0.45 kg per sqm, water @0.45 kg per sqm & cement @0.68 kg per sqm.) in the proportion of 1:1:1.5 by weight, After 4th coat allow the coating to air cure for minimum four hours, after 4 hours interval apply, 2 coat of Flexicoat-99 mixed with Water (Flexicoat-99 @0.33 kg/sqm, water @0.66 Kg per Sqm) in the proportion of 1:2 by weight in 4 hours interval. After 6th coat allow the coating to air cure for minimum 4 hours. After 4 hours interval apply, 7th coat of Engineer Plus smartcoat-99 (Smartcoat-99 @ 0.45 Ltr/sqm & water @ 1.35Ltr/sqm in the proportion of 1:3). The surface will dry within 2 hours and surface would be fully water proof and usable after a period of 24 hours and the final appearance of the coating will be gray/milky white. The rates are included the cost of all chemicals, labours, and Required T&P for Proper completion of Work.
Contract Date: Apr 29, 2026 Contract Value : 36.93 Lakh
Government Departments No of Bidders 3
Uttar Pradesh View Result →
29.
Defence #10822213 Price Bid
Price For Procurement Of Dental Materials And Consumables Dglp Re-01 For Fy 2020-21 For 21 Corps Dental Unit-1 Crimpable Hooks - Straight ( Pkt Of 10 ) 2 Crimpable Hooks - Curved ( Pkt Of 10 ) 3 Light Cure Band Cement 4 Small Expansion Screw For Lower 5 Reverse Pull Head Gear 6 Ortho Organizer 0.018” Roth Bracket Kit 7 Bracket Mbt 0.022” Swa With 1St & 2Nd Molar Tubes In Set 8 Preformed Molar Bands With 0.018 Roth Double Tube Prewelded - Ur ( Sizes : 34, 34.5, 35, 35.5, 40.5, 41, 41.5, 42 ) ( Kit Of 100 ) 9 Preformed Molar Bands With 0.018 Roth Single Tube Prewelded - Ll ( Sizes : 34, 34.5, 35, 35.5, 40.5, 41, 41.5, 42 ) ( Kit Of 100 ) 10 Preformed Molar Bands With 0.018 Roth Single Tube Prewelded - Lr ( Sizes : 34, 34.5, 35, 35.5, 40.5, 41, 41.5, 42 ) ( Kit Of 100 ) 11 “0.016” Ss Preformed A / W Upper ( Pkt Of 10 ) 12 “0.016” Ss Preformed A / W Lower ( Pkt Of 10 ) 13 “0.016X0.022” Niti A / W Upper ( Pkt Of 10 ) 14 “0.016X0.022” Niti A / W Lower ( Pkt Of 10 ) 15 “0.016X0.022” Cna Mushroom Loop A / W Upper 16 “0.016X0.022” Cna Mushroom Loop A / W Lower 17 E Chain 18 Bondable Upper Double Tube Roth 018 ( Pkt Of 10 ) 19 Bondable Lower Double Tube Roth 018 ( Pkt Of 10 ) 20 Bondable Upper Double Tube Roth 022 ( Pkt Of 10 ) 21 Bondable Lower Double Tube Roth 022 ( Pkt Of 10 ) 22 “0.016X0.022” Ss A / W Upper ( Pkt Of 10 ) 23 “0.016X0.022” Ss A / W Lower ( Pkt Of 10 ) 24 Boll End Clasp ( Pkt Of 10 ) 25 Ortho Organizer Closed Coil Spring With Hooks ( 9Mm ) Pkt Of 10 26 Expansion Screws ( Upper ) 27 Stim Orthodontic Tooth Brush 28 “0.012” Niti Wire ( Pkt Of 10 ) Upper 29 “0.014” Niti Wire Upper ( Pkt Of 10 ) 30 “0.014” Niti Wire Lower ( Pkt Of 10 ) 31 “0.016” Niti Wire Upper ( Pkt Of 10 ) 32 “0.016” Niti Wire Lower ( Pkt Of 10 ) 33 Orthodontic Relief Wax 34 0.016 X 0.022 Ss Brass Posted Arch Wire Upper 35 0.016 X 0.022 Ss Brass Posted Arch Wire Lower 36 Hyrax Screw 13Mm 37 Extra Oral Heavy Elastic ( Pkt Of 100 ) 38 Transbond Xt Kit ( 02 Adhesive Paste And 01 Primer ) 39 Temporary Mucosal Protector For Orthodontic Appliance ( Soft Flow ) Pkt Of Two 40 Self Sealing Sterilization Pouches ( Pkt Of 200 ) 41 Gp Solvent 42 Neoendo Flex Files Assorted 25 Mm 6 Files Pack ( 17 / 4%, 20 / 4%, 25 / 4%, 20 / 6%, 25 / 6%, Coronal Flaring File 30, 8% 43 Neoendo Flex Files Assorted 21 Mm 6 Files Pack ( 17 / 4%, 20 / 4%, 25 / 4%, 20 / 6%, 25 / 6%, Coronal Flaring File 30, 8% 44 Protaper Universal Files F1-F3 ( Assorted ) 45 Niti K Files 21 Mm Size 15-40 46 Niti K Files 25 Mm Size 15-40 47 H Files 21 Mm Size 15-40 48 Rc Help Edta 49 Metapex Double Syringes Pack Of 2 Syringes 50 Ah Plus Root Canal Sealent Two Tubes Of 4 Ml 51 Normal Saline Bott Of 500 Ml 52 Hydrogen Peroxide 3% Bott Of 500 Ml 53 Sodium Hypo Chlorite 5.25 % Bott Of 500 Ml 54 4% Gp Points Size 20 55 4% Gp Points Size 25 56 6% Gp Points Size 20 57 6% Gp Points Size 25 58 6% Gp Points Size 30 59 4% Paper Points Size 20 60 4% Paper Points Size 25 61 6% Paper Points Size 20 62 6% Paper Points Size 25 63 6% Paper Points Size 30 64 Endo Frost Spray For Cold Testing 65 Avuecal Calcium Hydroxide Paste 66 Pola Office Bleaching Kit 67 C Pilot Files Assorted 68 Burs ( Mani ) Tf-12 Set Of 5 69 Burs ( Mani ) Tf-31 Set Of 5 70 Burs ( Mani ) Br-31 Set Of 5 71 Burs ( Mani ) Br-40 Set Of 5 72 Burs ( Mani ) Ex-12 Set Of 5 73 Burs ( Mani ) Ex-25 Set Of 5 74 Protaper Retreatment Files Assorted 75 Fusion I Seal Light Cure Gic 76 Gc Gold Lable Ii 77 Temporary Filling Material 78 Etching Gel 79 Gc Gold Label 2 Lc 1-1 Pkg 80 Voco Calcimol Lc Pkt Of 2X2.5 Gm Syringes 81 Ivoclar Tetric N Bond Universal 82 Composite Restorative Kit 3 M Z 350 83 Ivoclar Flowable Composite 84 Protaper Universal Gp Points F1, F2, F3 ( Assorted ) 85 Calcium Hydroxide Cavity Liner And Protective Base ( Hydro Al Lc ) 86 Acryrock Teeth Set Set Of 28 87 Articulating Paper 88 Modelling Wax Pkt Of 12 Sheet 89 Api Acrylic Teeth Set Of 6 Anterior 90 Api Acrylic Teeth Set Of 6 Posterior 91 Glass Ionomer Luting Cement 92 Shofu Crown And Bridge Preparation Kit 93 Dpi Cold Cure Liquid Bottle Of 110 Ml 94 Kalabhai Ultrarock Die Stone ( 3 Kg ) 95 Plaster Of Paris ( 3 Kg ) 96 Diamond Disc 97 Renfert Glaze Brush Size 06 98 Renfert Glaze Brush Size 08 99 Vita Vmk Master Dentine Shade A1 Bott Of 28 Gm 100 Vita Vmk Master Dentine Shade A2 Bott Of 28 Gm 101 Vita Vmk Master Dentine Shade A3 Bott Of 28 Gm 102 Vita Vmk Master Dentine Shade B1 Bott Of 28 Gm 103 Vita Vmk Master Dentine Shade B2 Bott Of 28 Gm 104 Vita Vmk Master Glaze Liquid & Powder 105 Vita Vmk Master Stain 106 Silicone Wheel For Ceramic Polishing 107 Sprue Wax 4Mm 108 Icpa Fixon Denture Adhesive Powder Of 15 Gm 109 Dpi Green Stick 110 Kerr Temp Bond Ne 111 Resin Cement 112 Dentsply Aquasil Soft Putty Standard Pack 113 Dentsply Aquasil Ultrawash Material- Lv Pack Of 4X 50 Ml Cartridges 114 Pesso Reamers 32Mm Assorted #1-6 Pack Of 6 115 Hydroflouric Acid For Etching Ceramic 116 Vita Modeling Liquid 117 Sand Paper Mandrel ( Pack Of 2 ) 118 Macrodent Flexi Denture Cartridge 119 Mandrel For Disc 120 Lucitone High Impact Heat Cure Powder & Liquid Pack Of 450 Gm 121 Biostar Sheet 2 Mm Soft ( Acrylic Sheets ) Pkt Of 10 122 Biostar Sheets 1 Mm ( Acrylic Sheets ) Pkt Of 10 123 Equinox Dental Implant D 3.8X L 8 Mm With Abutment, Impression Post, Gingival Former & Implant Analog 124 Equinox Dental Implant D 3.8X L 9.5 Mm With Abutment, Impression Post, Gingival Former & Implant Analog 125 Equinox Dental Implant D 3.8Xl 11Mm With Abutment, Impression Post, Gingival Former & Implant Analog 126 Equinox Dental Implant D 4.5X L 8 Mm With Abutment, Impression Post, Gingival Former & Implant Analog 127 Equinox Dental Implant D 4.5X L 11Mm With Abutment, Impression Post, Gingival Former & Implant Analog 128 Debubblizer Bottle Of 1000 Ml 129 Pro Temp With Dispenser 130 Para Core 131 Base Plate 132 Impression Compound 133 Cold Cure ( Clear ) Powder 400G 134 Buff For Denture Polishing 135 Metal Finishing Kit For Metal Crown 136 Novabone Bone Putty Bone Graft 137 Bp Blade 15 Number ( Pkt Of 100 ) 138 Arch Bar 139 Oral Surgical Straight Fissure Bur For Micro Motor Hp 701 140 Suture Silk 3.0 141 Sterile Surgical Gloves ( No 7 ) 142 Settling Elastic Red 143 Septoject Sterile Disposable Needles 30G ( 0.30 X 25 Inch ) Pkt Of 100 144 Accu- Check Blood Glucose Strips Pkt Of 50 145 Suture Silk 3-0 25 Mm Round Body 146 25 Mm Suture Needle Round Body 147 Interdental Brush Ns ( Pkt Of 5 ) 148 Interdental Brush Ws ( Pkt Of 5 ) 149 Powder Free Examination Gloves ( Pkt Of100 ) 150 3M Handrub Antiseptic Solution 500 Ml 151 Hexidine Mouth Wash 500 Ml 152 Colgate Total Dental Floss Waxed 25 Mtr 153 Disposable Face Mask ( Pkt Of 100 ) 154 Shoe Cover Pkt Of 100 155 Lignocaine Topical Spray Bottle Of 100 Gms 156 Dental Napkin 157 Septodent Alvylogel Jar Of 10 Gm 158 Gauze Ribbon Absorbent 159 Gum Paint Bott Of 15 Ml 160 Tooth Paste For Sensitivity 161 Povidine Iodine Solution 5% Bottle Of 500 Ml 162 X-Ray Developer Bott Of 250 Ml 163 Fixer Bott Of 250 Ml 164 Mouth Mirror Top Pkt Of 10 165 Inj Lignocaine With Out Adrenaline 166 Septodont Isodan Solution Bott Of 5 Ml 167 Septodont Dimenol Solution Bott Of 200 Ml 168 Septodent Decident Box Containing 24 Sleeves 169 Ppe – Personal Protective Equipment Kit 170 Septodont R4 Solution Bott Of 13 Ml 171 N95 Protective Face Mask 172 Disposable Protective Full Face Shield
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Madhya Pradesh View Result →
30.
Defence #10822088 Price Bid
Supply Of Medical Stores Medicines And Consumables:-1. 010144 Pot. Monopersulphate 1% 2. 010146 2 Propanol & 1 Propanol Macetronium Ethylsulphate 0.2%, 45 Gm / 30Gm In 100Gm 3. 010148 Iso-Propanol 60-65% And Benzalkonium Chloride Skin Disinfectant, 63Gm / 0.025 Gm In 100 Gm 4. 010250 Indicator Soda Lime 5. 010255 Common Cold Tab ( Antihistiminics + Paracetamol 500 Mg Without Pseudoephedrine ) 6. 010273 Naproxen 250Mg Tab 7. 010279 Tab Etoricoxib 120Mg 8. 010280 Tab Piroxicam 20 Mg 9. 010303 Tab Cetrizine 10 Mg 10. 010308 Dexamethasone 0.5 Mg Tab 11. 010325 Promethazine Hcl 2.5%, 25Mg / Ml, 2 Ml Inj 12. 010539 Carbamazepine 200 Mg Cr Tab 13. 010546 Diazepam Syp 2Mg / 5Ml Bottle Of 60 Ml 14. 010547 Diazepam 5 Mg Tab 15. 010558 Sodium Valporate 500Mg / Ml Inj 16. 010564 Tab Lamotrizine 50 Mg 17. 010570 Baclofen 10 Mg Tab 18. 010626 Tab Amitryptilline 25Mg 19. 010655 Amphotericin Liposomal 50 Mg / Ml Inj 20. 010680 Chloroquine Phosphate Syp ( Containing 50Mg Base Per 5Ml ) Bottle Of 60 Ml 21. 010841 Methotrexate Sodium 50Mg, 2 Ml Inj 22. 010866 Mesna 200Mg Inj 23. 010876 Letrozole 2.5 Mg Tab 24. 010929 Tab Levodopa 125Mg 25. 010930 Tab Levodopa Cr 250Mg 26. 011107 Diltiazem 5Mg / Ml Inj 27. 011118 Nitroglycerin 5Mg Controlled Release Patches 28. 011143 Enalapril Maleate 10 Mg Tab 29. 011144 Enalapril Maleate 2.5 Mg Tab 30. 011150 Nifedipine Retard 20 Mg Cap / Tab 31. 011153 Sodium Nitroprusside 50 Mg, 5 Ml Inj 32. 011156 Digoxin 0.5 Mg, 2 Ml Inj 33. 011186 Losartan 25 Mg Tab 34. 011187 Losartan 50 Mg Tab 35. 011192 Ramipiril 10 Mg Tab 36. 011193 Enalapril 5 Mg Tab 37. 011325 Desonide 0.05% Bott Of 30 Ml 38. 011337 Glycerin ( Glycerol ) 39. 011341 Isotretinoin 20 Mg Cap 40. 011358 Paraffin Soft Yellow 41. 011360 Salicylic Acid Powder 42. 011371 Terbinafine 1% Cream Tube Of 10 Gm 43. 011385 Coal Tar 6% V / W + Salicyclic Acid 3% Oint 50 Gm Tube 44. 011386 Extract Capae, Heparin Sodium, Allantoin Gel 20 Gm 45. 011387 Halobetasol Propionate Lotion 0.05% W / V Bottle 30Ml 46. 011479 Paraformaldehyde Tab For Sterilisation Of Catheters 47. 011636 Omeprazole 20 Mg Cap 48. 011652 Anti Haemorrhoidal Ointment Containing Hydrocortisone Acetate 5.58Mg, Framycetin 10Mg Heparin 100Iu, Esculoside 10Mg Ethyleaminobenzoate 10Mg, Butyleaminobenzoate 10Mg Per Gm Tube Of 10 Gm 49. 011658 Hydrocortisone Enema 10%W / W 50. 011690 Secnidazole 1 Gm Tab 51. 011738 Hydroxyprogesterone Caproate 500 Mg / 2 Ml ( Amp Of 2 Ml ) Inj 52. 011751 Micronised Progesterone 100Mg Inj 53. 011753 Obstetric Antiseptic Cream Containing Dichloroxylenol 1% Terpineol 1% Phenol 0.25% In Lubricant Base 54. 011755 Oestradiol 1 Mg / Gm Cream 15 Gm + Applicator 55. 011767 Human Insulin Analogue Long Acting Ing, 100 Iu / Ml ( Recombinant Dna Origin ) 300Iu Disposable Pen With 5 Needles Per Pen 56. 011771 Glibenclamide 5Mg Tab 57. 011972 Nourish Renal ( 100 Gm, Providing 486 Kcal, Proteins 11.5G, Carb 60.4G, Fats 22.7G, ( Min & Vit ) 58. 011976 Papaverine Hydrochloride 50 Mg, 2 Ml Inj 59. 012003 Betaxolol Eye Drops 0.25%-0.5% Bott Of 5 Ml 60. 012006 Ciprofloxacin Hcl 0.3% Tube Of 5 Gm 61. 012010 Cyclosporine Eye Drop 0.05% Bott Of 5 Ml 62. 012014 Gatifloxacin 0.3% Eye Drop Bott Of 5 Ml 63. 012015 Gentamicin Sulphate 0.3% W / V Gentamicin Base With Hydrocortisone Acetate Ip 1% W / V Eye & Ear Drops Bott Of 5 Ml 64. 012024 Lignocaine 1% For Intra-Ocular Use Vial Of 1 Ml ( Preservative Free ) 65. 012025 Lignocaine Intracam 0.05% Vial Of 1 Ml 66. 012027 Carboxy Methyl Cellulose 1% Eye Drop Bott Of 5 Ml 67. 012028 Methyl Cellulose Inj 2% ( For Intra Ocular Use ) Vial Of 2Ml 68. 012029 Methyl Cellullose 2% Solution Bottle Of 5 Ml 69. 012039 Pilocarpine Intracameral Inj 0.5% Pilocarpine Nitrate Intra-Ocular Inj Without Preservatives, Amp Of 01Ml Each 70. 012040 Povidone 5% Eye Drop Bott Of 5 Ml 71. 012041 Predinisolone Acetate 1% W / V Bott Of 5 Ml 72. 012063 Atropine Sulphate Oint 1% Tube Of 3 Gm 73. 012064 Dexamethasone 0.1% Eye Drop Bott Of 5 Ml 74. 012121 Soldium Chromoglycate Nasal Spray 2% W / V Bottle Of 20 Ml 75. 012254 Syrup Calcium With Vit-D3 ( 80Mg / 5 Ml ) 200Ml Bottle 76. 012255 Tab Isoniazid 60Mg+Rifampicin 600Mg 77. 012256 Tab ( Dispersable ) Isoniazid 60Mg+Rifampicin 60Mg+Pyrazinamide 150Mg 78. 012302 Bupropion Hcl 150 Mg Sr Tab 79. 012305 Chloridiazepoxide 10Mg Tab 80. 012309 Chlorpromazine Hcl 100 Mg Tab 81. 012313 Clomipramine Hcl 25 Mg Tab 82. 012317 Doxepin Hcl 75 Mg Cap 83. 012323 Haloperidol Deconate 50 Mg / Ml Inj 84. 012326 Haloperidol Syp 2Mg / Ml Bott Of 30 Ml 85. 012327 Imipramine 25 Mg Tab 86. 012331 Lithium Carbonate 300 Mg Cap / Tab 87. 012332 Mirtazapine 15 Mg Tab 88. 012353 Aripiprazole 10 Mg Tab 89. 012362 Olanzapine 10Mg / Ml Inj 90. 012370 Venlafaxine 37.5Mg Tab 91. 012378 Inj Risperidone Prolonged Release Suspension 25Mg 92. 012451 Etophylline Bp 84.7 Mg And Theophylline Ip 25.3, Per Ml, 2 Ml Inj 93. 012455 Beclomethasone Diproprionate 50 Mcg Salbutamol ( As Sulphate ) 100Mcg Per Metered Dose, Aerosol, 200 Dose Units 94. 012471 Salbutamol Sulphate 500 Mcg / Ml 1Ml Inj 95. 012476 Salbutamol Sulphate Respirator Solution 5Mg / Ml, Vial Of 15 Ml 96. 012478 Tiotropium Bromide 18 Mcg & Formoterol 12 Mcg Dry Powder Cap 97. 012487 Bromhexine Syp 5 Ml Containing 4 Mg Of Bromhexine Hcl Bottle Of 120Ml 98. 012492 Syp Codeine Phosphate 10Mg+Chlorphenaramine Maleate 4Mg Per 5Ml Bottle Of 100Ml 99. 012493 Syrup Terbutaline Sulphate 1.25Mg+Bromhexine Hcl 4Mg+Guaifenesin 50Mg+Per 5 Ml Bottle Of 100 Ml 100. 012504 Dextrose Monohydrate For Oral Use 101. 012513 Amino Acid Preparation Iv Bott Of 200- 250Ml 102. 012519 Potassium Chloride Liquid 20% Bott Of 200 Ml 103. 012614 Enzymatic Detergent 104. 012616 Antimicrobial Hand Gel Containing Ethyl Alcohol 60% + Cyclomethicone C12-15 Alkyl Lactate + Cetyl Lactate + Phenoxyethanol + Stearyl Alcohol With Moisturizer 105. 012650 Enteral Feed Powder, Protein 85% Short Chain Peptides 15%, Free Amino Acids, Fat 50%, Mct 25% Vet Fat Carbohydrate Malto Destri Sachet Of 126 Gm 106. 012652 Immuno Booster Enteral Feed Containing Protein>13Gm, Fat<8Gm, Carbohydrates>32 Gm Enriched With Omega-3 Fatty Acids And Arginine 107. 012683 Oxybutynin 2.5 Mg Tab 108. 012702 Ascorbic Acid 500 Mg Tab 109. 012706 B1, 50 Mg Inj 110. 012718 Multi Vit Inj Iv 2-10 Ml With Minimum Constituents Having Thiamine ( B1 ) - 30Mg / Ml, Pyridoxine ( B6 ) 30Mg / Ml And ( B12 ) Cyanocobelemine-300Mcg / Ml 111. 012741 Vitamin E 200 Mg Cap 112. 012806 Sodium Hyaluronate 1% ( Intra Articular ) Inj 113. 012916 Colchicine 0.5 Mg Tab 114. 012918 Capsacain Gel Tube Of 20 Gm 115. 012922 Fexofenadine Hydrochloride Tab 120 Mg 116. 012924 Glucosamine 500 Mg Tab 117. 012930 Immunoglobulin Intravenous 2.5Gm Inj 118. 012932 Immunoglobulin Intravenous 5 Gm Inj 119. 012946 Leflunomide 10 Mg Tab 120. 013224 Cefoperazone Sodium 1 Gm Inj 121. 013227 Cefoperazone Sodium 1Gm & Sulbactum Sodium 1Gm Inj 122. 013245 Erythromycin Ethyl Succinate For Oral Susp Containing Erythromycin Base 100Mg Per 5 Ml Or 125Mg 5 Ml Bottle Of 40 Ml To 60 Ml 123. 013248 Gentamycin Sulphate Inj Im / Iv 40Mg / Ml, 2 Ml Inj 124. 013250 Imipenem 500Mg Inj 125. 013254 Netilmicin Sulphate 200 Mg / 2Ml Inj 126. 013264 Ticarcillin 3G + Clavulanic Acid 100Mg Inj 127. 013268 Meropenem 500Mg Inj 128. 013282 Acyclovir 800 Mg Tab 129. 013292 Nevirapine 200 Mg Tab 130. 013296 Zidovudine Tab 300 Mg
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 12
Jammu And Kashmir View Result →
31.
Defence #10801071 Price Bid
Tender For Comprehensive B R And Em Repair Maintenance Works To 14 Asc Af Kakkanad Under Age I R D Kochi; 1 Hacking out old broken glass panes 4 mm thick from steel frame including putty/ metal beadings and supply and fix sheet glass ordinary 4 mm thick, in squares n.exc. 0.50 Sqm in each pane including necessary new oil putty or with existing metal beadings complete all as specified and as directed 2 Hacking out old broken glass panes 4 mm thick from wooden framed shutters including putty/wooden beadings and supply and fix sheet glass ordinary quality, 4 mm thick, in square n.exc. 0.5 Sqm in each pane including necessary oil putty/wooden beads complete all as specified and as directed. 3 S&F in repairs extruded aluminium anodised 150 mm long handles fabricated type. 4 All as per item No 3 above but 100 mm long. 5 Supply and fix in repairs foot operated door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring and cover plate overall length 150 mm including taking down defective foot operated door stopper all as specified and as directed. 6 S&F in repairsmortice lock brass 4 levers vertical type 100 mm 7 S & Fin repairs door closer hydraulically regulated, castiron body, designation No -3, universal type ,suitable for door shuttersof 851 to1000 mm in width and of wt between 61 to 80 Kg and fixed 8 Re securing and easing to wooden shutters of any description area n.exc 1 Sqm each without taking down the shutter all as specified and as directed. 9 Re securing and easing to wooden shutters of any description exc 1 Sqmbut n.exc 2 Sqm each without taking down the shutters all as specified and as directed. 10 S&F In repairs Aluminium anodised, barrel tower bolts of extruded section 150 mm long. 11 All as per item No 10 above but 100 mm long. 12 S&F in repairs Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy, 300 mm long 13 Taking down shutters exc 1 sq. m and n exc2 sq. m each and re-fixing in same openings. 14 Taking down shutters n exc 1 sq. m each and re-fixing in same openings. 15 S&F in repairs Butt hinges, medium weight cold rolled mild steel 100 mm size. 16 All as per item No 15 above but 75 mm size. 17 Taking down and removing to or from store chowkats or framesexc 1.5 sq. m and not exc 4 sqm each but with shutters (without taking off shutters from the frames) 18 S&F Solid PVC door frame of size 50mm x 47mm made of of 5mm plain color PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing. 19 S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain color PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color PVC sheets for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain color PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 20 S&F Aluminium, anodised, barrel tower boltsof extruded section and fixed length of bolt in 200 mm complete all as specified and directed. 21 S&F Butt hinges, medium weight, cold rolled mild steel, and fixed size of hinges in 100 mm complete all as specified and directed. 22 S&F Aluminium handles, cast type, anodised size of handle in 150mm 23 Supply and fix in repair PVC low level flushing cistern 10 liters capacity with ISI mark including inlet, ball valve, float, handle and brackets etc. including taking down old defective low level flushing cistern all as specified and as directed. 24 Supply and fix plastic seat and cover superior quality closed pattern with flat bottom of heavy duty including necessary hinged devices, including taking down damaged/ broken plastic seat and cover from EWC all as specified and as directed. 25 Supply and Fix in repair PVC connection with PTMT nuts of length 450 mm screwed for iron pipe15 mm bore. 26 Supply and fix in repair 15 mm dia CP pillar cocks fancy type for wash hand basin including taking down existing pillar cock, all as specified and as directed. 27 Supply and fix 150 mm square grating of PTMT to floor trap/nahani trap including taking down existing damaged CI grating from floor tap/nahani trap all as specified and as directed. 28 Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore pipe, all as specified and as directed. 29 All as per item No 28 above but 20mm bore. 30 All as per item No 28 above but 25/32 mm bore. 31 Supply and fix Unplasticised PVC pipes of bore 15mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed 32 Supply and fix Unplasticised PVC pipes of bore 20mm, pressure rating 10 Kg/Sq. Cm pressure rating 10 Kgf/Sq. Cm all as specified and as directed 33 Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 34 S&F in repairs bib taps 15mm bore, cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed for iron pipe or for brass ferrule all as specified and as directed 35 S&F in repairs stop valves 15mm bore, cast copper alloy chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed. 36 S&F in repairs vitreous china wash basin white flat back, size 580x450mm excluding taps waste, chain and plug and porcelain stopper including brackets all as specified and as directed. 37 S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe). 38 Supply and fix tubular towel rail aluminium anodised20 mm dia D type 60 cm long between flanges including taking down defective aluminium tubular towel rail all as specified and as directed. 39 Supply and fix in repair beveled edgedmirror of size 600 x 450 mm selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. 40 S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore. 41 All as per item 40 above but 110 mm bore 42 S&F PVC (SWR) bends any radius 75 mm bore 43 Supply and fix in repairs 100 mm dia CIfloor trap/nahani trap including taking down existing damaged CI grating from floor trap/nahani trap 44 M&L Dismantling water tanks and removing to store exc 250 & n exc 500 capacity 45 M&L Dismantling water tanks and removing to store exc 500 & n exc 1000 capacity 46 M&L Rotational moulded polyethylene water storage tanks 500 litres capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia PTMT Ball valve high pressure all as directed. 47 Allas per item No 46 above but 1000 ltr capacity 48 M & L for PU injection grouting by making necessary holes of 8 to 10 mm in concrete to a depth of about 75mm using proper electric hammer drill. Fix new nipples of 8 to 10mm using aluminum pipes using neat cement or M-Seal for proper anchorage. Carry-out pressure grouting using shaligrout 2k /equivalent) using a proper grouting pump. Seal the holes properly after the grouting nipples have been removed all as specified and directed by Engg -In Charge. 49 Material and labour for taking down old plaster and rendering 10mm thick in CM 1:6 on other than fair faces of brickor concrete surfaces finishing smooth and even and smooth without using extra cement making good match the old surface finish. 50 M&L two coat of OBD over a coat of primer on newly plastered surfaces of wall including cornices and preparation of surfaces. 51 M&L pre laminated particle board 12mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixture with screws to frame work 52 Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge 53 M&L Screed bed or bedding layer 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge 54 M&L Rendering 10 mm thick in CM 1:3 on brick or concrete surfaces, finished fair and even for receiving wall tiles. 55 S&F glazed ceramic coloured tiles 300 x 200 x 7 mm thickon vertical surfaces, set and jointed in neat cement slurry and pointed in white/colour cement to match over 10 mm thick rendering (backing coat)in cm 1:3, complete all as specified and directed by Engineer-in-Charge. 56 M & L for non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm In floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge 57 S&F Vitrified ceramic coloured tiles 10mm thick (Square/ Rectangular) polished area of each tile not exceeding 0.36 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match 58 S&F in repairs health faucet 15mm size chromium plated standard size all as specified and directed. 59 Supply and fixed in repairs stainless steel wire cloth, 0.63mm nominal dia of wire and average width aperture 1.40mm and fixed with tinned tacks, or galvanized wire staples 60 M&L for chip and remove all damaged and de bonded concrete and plaster from the RCC slabs by manually or mechanically so as to expose the corroded reinforcement bars, removingthe debris with in a lead of 100 meters as directed by Engineer-in-charge. 61 M&L for supply and application of Nitobond EP (Manufactured by M/s Fosroc chemicals India Ltd) epoxy bonding agent over the old concrete surface complete all as specified and all as directed by Engineer-in-charge. 62 M&L for supply and application of rust remover/converter (Rebaklense RR of M/s Fosroc Chemicals India Ltd. or equivalent) or Amandur ,(manufactured by GK technocom) over the corroded reinforcement bar where ever micro concreting is required and cleaning the same after application complete all as directed by Engineer-in-charge. 63 M&L for plastering with Nitobond SBR (Styrene butadiene polymer bonding agent cum cement mortar/concrete modifier Manufactured by M/s Fosroc Chemicals India Ltd or equivalent) modified cement mortar (1:4) under the slab to an average thickness of 40 mm (applied in two layers not exceeding 20mm each) , including the cost of all materials rent of tools and labour charges etc complete all as directed by Engr-in-charge. 64 M&L Preparation of newsurfaces of ceiling and applying two coats of distemper oil emulsion on ceiling over a coat of primer over 3 mm thick wall care putty plastered and other surfaces with alkali resistant priming paint complete all as specified. 65 Taking down cement plaster of any description on walls incl raking out joints, hacking for key scrubbing down with water 66 M&L for plastering in CM1:6, 10 mm thick on interior walls finished even and smooth w/o using extra cement. 67 M&L for plasteringin CM 1:3, 5mm thick on ceiling finished even and smooth w/o using extra cement 68 M&L for two coats of Antifungal paint (Apex ultima Protek of Asian paint or Equivalent in approved Makes) over a coat of Exterior primer (Professional pack of Asian paints) over a coat of external wall care putty n.exc 2 mm thick on new or old prepared plastered external surfaces . 69 M&L Preparation of Newsurfaces of internal walland applying two coats of distemper oil emulsion on wall over a coat of primer plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified. 70 M&L Preparation of oldsurfaces of internal wall by complete removal of existing treatment , and applying two coats of distemper oil emulsion on wall over a coat of primer plastered and other surfaces with alkali resistant priming paint over 3mm thick wall care putty complete all as specified. 71 M&L Preparation of old surfaces of ceiling by complete removal of existing treatment, and applying two coats of distemper oil emulsion on ceiling over a coat of primer, plastered and other surfaces with alkali resistant paint complete all as specified. 72 Demolition of brick work / PCC block masonry work built in cement mortar etc complete all as specified. 73 M&L Precast Concrete block masonry with solid blocks in PCC 1:3:6 type C1 (using 20 mm stone agg) exc 10 cm in width and setting in mortar 1:4with minimum compressive strength of 5N/ sq mm complete all as specified and as directed. 74 M&L for providing and fixing Gypsum Board 12mm thick in walls fixed with screw as per manufacturer’s instructions complete all as specified. 75 Dismantling in Wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified. 76 M & L Anodised aluminium snap grid frame work (size of grid 605x 605) mm for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified and as directed. 77 M&L for providing and fixing Exposed metal frame ceiling with fire resistant calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) fixed with screw as per manufacturer’s instructions complete all as specified. 78 Cleaning (mechanically)of sewage line/effluent drains 150/110 mm dia and disposing offthe sludge outside MoD land complete all as directed. 79 Removing the chokes in drains of WC/bath room/kitchen up to 1st manhole including cleaning of gully traps in single storey/ground floor of multi storeyed buildings, all as specified and directed. 80 Removing chokes in drains of WC/bath room/kitchen other than ground floor all as specified and directed. 81 Destruction of growth of weed plants with roots level on wall/ roof of building any height with weedicides such as Round up manufactured by Excel Chemical Industries and sprayed in and around roots and the place of possible growth of weeds as per manufacturer’sinstructions and making good the surfacescomplete all as specifiedand as directed. 82 Demolition of reinforced cement concrete in any position not otherwise specifically provided for 83 M& L for Precast RCC Cover slabs type B-1, 1:2:4 (20 mm graded stone aggregate as in slabs of drains including necessary form works. (Reinforcement bar will be measuredand paid separately). 84 M&L TMT bars 10mm dia and over cut to length bent to shape required, including, cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips 85 Demolition of cement concrete in any position not otherwise specifically provided for complete all as specified and directed. 86 M & L for 1:3:6 Type C-2 (using 40 mm graded stone aggregate) for surface channels anddrains all as specified 87 Extra for forming fair finished drain or channel 30 Cminner girth in cement concrete ,using extra cement, including forms, moulds, mitered /stopped endsetc 88 Opening manhole of septic tank remove night soil and sediments including liquid by mechanical pumping into tanker lorry having cleaning internal surface with water and re-fix the manhole covers, complete all as specified and directed. Notes :-(i)Volume of the manhole will be worked out based on the depth or actual depth of sludge, whichever is less.(ii) Water shall be procured by the contractor for cleaning purpose. 89 Demolition of cement concretein ground floors and pavings n.exc 15 cm thickness (below or above ground level) 90 M&L for 100mm thick PCC ( 1:3:6)type C-2,using 40mm graded stone aggregate as in hard standing/path/sub basefinished to an even and fair surfaces. 91 M&L forming contraction (Dummy) joints 65 mm deep x 10 mm wide, filled with sealing compound Grade A. 92 Dismantling structural steel work incl doors, gates but excluding framed trusses. 93 S & FMS work in railings, balusters, posts and struts in fencing etc including cutting tops to shapeas directed, includingall necessary welding, drilling bolting or riveting etc and similar work conforming to FE 290 Gd E-165 complete all as specified 94 S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging with and including hooks and hinges, also fastening and fixing complete conforming to Fe-410W (Gde-E-250) 95 M&L for Point wiring for light point /fan point/Exhaust fan /Bell Pointwith 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, with modular switch, modular plate and cover with GI box and earthing the point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable etc. including dismantling /removing of burnt cable/making good surface asrequired . 96 M&L for submain wiring for 5 Amp socket outlet point on independent board with 2x 1.5 sqmm single core PVC insulated and unsheathed FRLS cable, 1100 volts grade IS -694 marked with multi standard copper conductors and earth continuity wire with similar 1x1.5 sqmm cable (incl connecting to earth dolly) drawn through and single core cable in surface/recessed medium class PVC conduit including dismantling /removing of burnt cable/making good surface as persiterequirement . 97 Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular switch and 5/6A modular socket ,connection etc. as required atsitecomplete all as specified and directed (for Independent 5 Amp socket ) . 98 M&L for wiring for circuit along with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed steel conduit as required .wire 2x22.5 sq.mm + 1x2.5 sq.mm earth wire for 15/25 power plug/socket. 99 All as per item above but Supply and fixingsuitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 15/16 A modular switch and 15/16A modularsocket ,connection etc. as required atsitecomplete all as specified and directed( for 15/16 Amp Socket ). 100 M&L for wiring for circuit along with 4 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface /recessed steel conduit as required .wire 2x4 sq.mm + 1x4 sq.mm earth wire (for Ac & Geyser ) 101 S&F Electronic ceiling fan regulator, modular type stepped /socket type heavy duty suitable to work on 230 volts complete all as specified and directed. 102 Supply & Fixing piano type 5/6 amps switch on the existing Switch box including connection as required on site. 103 Supply & Fixing piano type 2 way 5/6 amps switch on the existing Switch box including connection as required on site. 104 Supply & Fixing piano type 15/16 amps switch on the existing Switch box including connection as required on site. 105 Supply & Fixing piano type 3 pin 5/6 amps socket outlet switch on the existing Switch box including connection as required on site. 106 Supply & Fixing piano type 6 pin 15/16 amps socket outlet switch on the existing Switch box including connection as required on site. 107 Supply & Fixing 5/6 Amodular switch on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 108 Supply & Fixing 15/25 Amodular switch on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 109 Supply & Fixing 3 pin 5/6 modular socket on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 110 Supply & Fixing 6 pin 15/25 modular socket on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 111 Supply & Fixing modular bell push on the existing modular plate & Switch box including connection but excluding modular plates etc. as required on site. 112 Supply and fixing 1 or 2 module base & cover plate on existing modular metal boxes etc as required. 113 Supply and fixing 3 module base & cover plate on existing modular metal boxes etc as required. 114 Supply and fixing 4 module base & cover plate on existing modular metal boxes etc as required. 115 Supply and fixing 6 module base & cover plate on existing modular metal boxes etc as required. 116 Supply and fixing 8 module base & cover plate on existing modular metal boxes etc as required. 117 Supply and fixing LED light fitting 1X20W,220V high efficiency(efficiency up to 100lm/w) polycarbonate batten bright light having high quality material and design, compact appearance simple and versatile in nature makes it as long lasting efficient solution, Make Crompton, Product code : CCS-102-20-30/40/65-SL-DP-NWHor GM/ Panasonic/Havells etc. 118 Supply and fixing LED light fitting 1X10W,220V high efficiency(efficiency up to 100lm/w)polycarbonate batten bright light having high quality material and design, compact appearance simple and versatile in nature makes it as long lasting efficient solution, Make Crompton, Product code : CCS-102-10-30/40/65-SL-DP-NWH or Havells /Panasonic/GM etc. 119 S & F in repairs LED 20W T8 Tube within built driver and efficiency of 100lm/w having glare free lighting distribution, double sided connection, housing made of high grade polycarbonate cover, 2.5 KV internal surge protection, IP20 ingress protection, PCB mounted on extruded metal plate. Make: Crompton model No LT8-20-865-(2) or equivalent in Havells/C&S/ Phillips/Bajaj. 120 S&F switch socket combination 5 Amp with PVC box suitable for 230 Volt on surface. 121 S&F switch socket combination 15 Amp with PVC box suitable for 230 Volt in surface 122 M&L switch socket combination2 in 1, 6/16 Amp flush type in existing switch box. 123 All as per item above but 6 Amp flush type in existing switch box. 124 M&L forbell AC 230 V Single pole ding dong type. 125 Supply and fixing angular type batten holder insulator body of PVC/ polycarbonate type suitable for 10/9 W Led bulb. 126 Supply and fixing fan condenser / capacitor of size 2.25/2.5 suitable for ceiling fan of any sweep. 127 Supply and fixingonly LED lamp of 9 watt, Make : Crompton/ Havells /Panasonic 128 S&F of 20 Amps 240 V , SPN Industrial type socket outlet, with 2 pole and earth ,metal enclosed plug top along with 20 A C Curve ,SP MCB , in sheet steel enclosure ,on surface or in recess with chained metal cover for the socket outlet and complete with connections ,testing and commissioning etc. as required . 129 Supplying and fixing 6 way, Double door single pole and neutral sheet steel, MCB distribution board,240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar interconnections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolator) 130 Supplying and fixing 8 way, Double door single pole and neutral sheet steel, MCB distribution board,240 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar ,din bar interconnections, powder painted including earthing etc. as required (But without MCB / RCCB/Isolator) 131 Supplying and fixing 4 way, Horizontal type , Three pole and neutral Dl sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) 132 Supply and fixing of 5A to 32 A rating, 240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of single pole in the existing MCB DB Complete with connections, testing and commissioning etc ax required. 133 Supply and fixing of 5A to 32 A rating,240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of single pole and neutralin the existing MCB DB Complete with connections, testing and commissioning etc ax required. 134 Supply and fixing of 63 A rating,240/415V, 10kA C curve miniature circuit Breaker suitable for inductive load of Triplepole and neutralin the existing MCB DB Complete with connections, testing and commissioning etc as required. Make: IndoAsain, HSN Code: 8536, Cat. Nos.: 810107 or equivalent make of LT/ Havells. 135 M & L LED Square surface mounted Led Panel 12w, PDC housing and high translucent frosted plastic diffuser makes it a robust Luminar and efficiency up to 100lm/w. Make: Crompton, Model no LCDSPLN-R-12-CDL or equivalent make of GM/Havells. 136 M & L LED Round and Square recess mounted 12w LED edge lit slim down light with die cast aluminium housing finished in premium white coating and efficacy up to 100lm/w suitable for false ceiling. Make Crompton, Model no LSCRM-12W-WW/NW/ CDL or equivalent make of GM/Havells. 137 Dismantling and taking down ceiling fan any size for servicing by cleaning dust, filling cavities with filler and painting complete with synthetic enamel paint by spraying and re fixing the same in position, connecting and testingall as specified and directed. 138 M & L for carry out rewinding of ceiling fan motor of any size/ make including taking down from any height ,dismantling ceiling fan motor , removing old burnt winding wire, cleaning the armature thoroughly and replacing the same with new enameled copper wire of adequate size/gauge including class B insulation, varnishing heating etc, reassembling and removing the old painting and providing newpainting to ceiling fanscompletewith synthetic enamel Grey paintby spraying using machine including filling cavities with filler one coat after cleaning all dust making the surface in good finishes etc , testing, re-fixing the same in original position complete all as specified and as directed by the Engineer - in - Charge.Note: Rate include the taking down the ceiling fan and deposited to MES store for checkingand repairing) 139 All as per Item above but for the Exhaust fan of 300 /450 mm sweep sizes: 140 S & F in repairs of LED 36W surface full lit luminaire with glare free uniform illumination with longer life and less maintenance available in 2x2 ft (> 100 lm/w).Make: Crompton, Model No LCTLSNE-36-FO-WW/TL/CDL or Havells /C&S/ Phillips/Bajaj. 141 Supply andLayingGI tubing medium grade of size 50 mm with and including all fittings such as bends, elbows, tees, short pieces etc complete in trenches of following sizes after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. Note- Excavation & earth work will be measured & paid separately. 142 All as per item above but 40 mm bore 143 All as per item above but 25 mm bore 144 Supply & Fixing of Size 50 mm GI tubing medium grade withand including all fittings such as bends, elbows, tees, short pieces etc complete on wall and ceiling or laid in floors after taking down old unserviceable GI pipes all as specified and directed by Engr in charge. 145 All as per item No 4 above but 40 mm bore 146 All as per item No 4 above but 25 mm bore 147 All as per item No 4 above but 20 mm bore 148 Repairs to leakage /damaged G.I. pipe of size 50/40 mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples ,Bends etc. all asdirected by Engr- in- charge. Note:- G.I. pipe length will be measured and paid separately under relevant item of sch A 149 All as per item above but 25/20 mm bore 150 Supply and fix in repairs gun metal gate valve of size 50 mm ISI marked with iron wheel head screwed both ends all as directed. 151 All as per item above but 40 mm bore 152 All as per item above but 25 mm bore 153 All as per item above but 20 mm bore 154 All as per item above but 15 mm bore 155 S&F in repairs un plasticized PVC pipe, 25mm bore of pressure rating 10 Kg/ Sqcm with all fittings, fixed to walls, ceilings or in floors complete with snap clips hooks etc and taking out old unserviceable one all as specified an as directed 156 All as per item above butof size 20 mm bore dia 157 Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil forlaying/taking out GI pipe line all as specified and directed. 158 Returning filling in including spreadingleveling watering and well rammingin layer not exceeding 25 cm in soft/loose soil all as specified and directed. 159 Removing excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mabove the starting point all as specified and directed. 160 M & L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside of the RCC Under Ground Sump of10,000 Ltrscapacity by dewatering the sump and cleaning the complete inner surfaces by rubbing / scrapping by wire brush to removethe sludge, washing with bleaching powder solution and then with water and draining out sludge, water completely including applying one coat of white wash to all the inner surfaces, and details of tanks like date of cleaning ,capacity of tanks etc shall be written on the outside of the tank with synthetic enamel paint with lettersize 20 cm high in white color , over a black backgroundof size 100x60 cmand charges included for pump set for de watering incl operator all as specified anddirected 161 M&L for removing the dirt, sediments, silt, algae, fungi etc, from the bottom and walls of the inside PVC Service tanks kept on roof top of buildings or on stagings, cleaning the surface using brush and other cleaning materials such as bleaching powder as required including writing the capacity of the tank and date of cleaning with white enamel paint over black back ground all as specified and directed for the following capacity of tanks at different locations on Technical/Residential Buildings all as specified and directed by Engr-in-Charge. 162 2000 Ltr capacity 163 1000 Ltr Capacity 164 500/300 Ltr capacity 165 S&F in repairs float Valve 40mm bore (Ball brass valves) high pressure type with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed and taking out old unserviceable one all as specified and directed 166 All as per item above but of size 25mm bore 167 All as per item above but of size 20mm bore 168 S&F in repair/replacement HDPE Tank cover suitable for 300 to 1000 Litr capacity and taking out old unserviceable one 169 All as per item above but for 2000Ltr capacity tanks 170 M&L for repair/replacement ofFoot valve of size 50mmbrass heavy duty including taking up the suction pipe and re-fixing the same after replacement of foot valve in to the sump for proper functioning of pump and taking out old unserviceable one all as specified and directed 171 Dismantling of Mono-block Pump set from the existing position for servicing including opening the pump replacing the unserviceable ball bearings of suitable size for capacities up to 5 HP including greasing complete all as specified and directed 172 Repairs and servicing of Electric chlorine dozing Pump/ system Make Sathya sai Aqua Pura Services with Ant siphon valve including servicing of pump and motor with repair/ replacement of unserviceable parts like piston, stroke controller, suction and delivery tubing, PVC foot valve, nozzle, solution tank inlet, PVC water tubing 15mmbore, gate valve 15mm size etc, complete all as specified and directed. 173 M&L for cleaning of pump sets starter panel after dismantling the incoming and outgoing connections from MCCBs /MCBs and replacing the old unserviceable gland, lugs, nuts &bolts, push buttons, indicating lamps, supporting insulators etc, and checking the serviceability of MCBs cables and earth continuity conductor including replacement of worn out and unserviceable minor accessories all as specified and directed 174 M&L for Replacement of unserviceable DOL Starter suitable for motor up to 5 HPincluding connections 175 M&L for Repairing the old Valve pit of dimension 60x45x45 cm by taking out plaster and rendering with 10mm thick CM(1:4) including PCC (1:3:6) TYPE C2 on base, brick work inCM (1:4) as required and applying two coats of white wash on plastered surface including applying two coats of synthetic enamel paint over one coat of red oxide primer over steel surfaces after preparation, complete all as specified and directed 176 M&L for painting pump set including preparation old surfaces and painting with two coats of synthetic enamel paint over a coat of red oxide primer including marking the signs, letters, Nos on the pump setof capacity up to 2HP all as specified and as directed. 177 M&L for painting of old painted GI pipe of any size on the external surfaces after preparation, located in and out of Pump House, by scrapping and cleaning of external surfaces and applying two coats of Sky Blue paint over a coat of red oxide primer complete all as specified and directed. 178 Dismantling , taking out complete burnt winding wire of submersible motor including cleaning of statorslots replacement of defective parts and rewinding with existing type & gauge ofcopper wireas per motor capacity and using new insulation material such as insulating paper sleeves etc. replacement of submersible cable as required length complete all as directed of rating 1.5/2HP Single phase 179 Repairs to leakage /damaged G.I. pipe of size 80 to 100mm bore including necessary excavation, returning, filling in removal/ pump out the line water cutting out GI pipes at both ends replacement ofGI Pipe and jointing with new fittings accessories such assockets, tees, reducers, Nipples, Bends etc. all asdirected by Engr- in- charge. Note:- (i) G.I. pipe length will be measured and paid separately under relevant item of sch A 180 Material Labour for fixing Mechanical joint suitable 80 mm dia GI pipe, fabricated and made out of MS sheet of thickness 6/8 mm including welding work, rubber gasket, nuts, bolts and washers complete all as specified and directed by Engr in charge. 181 Comprehensive Maintenance, Servicing and carrying out periodical service to DG set along with AMF panel or standard panel like carry out oil service and routine checkup/maintenance as per manufacturers schedule, checking complete system of lubrication, cooling systems, air intake systems, fuel systems, exhaust systems, DC/AC electrical systems in DG Set as well as in AMF/Standard Panel, tightening bolts and nuts in engine and alternator related systems, etc and repairs including material for renewal/ replacement of minor defective parts of like connectors, MCBs , phase indication lamps etc for following capacity of DG sets all as specified and directed by Engr in charge. 182 35 KVA with AMF Panel installed at 14 ASC, AF Kakkanad 183 20 KVA with AMF Panel installed at 14 ASC 184 Note:The spares to DG Sets items as listed below as SUPPLY ONLY will be used whenever required only and it shall measured and paid separately under respective items. 185 The rate is inclusive of all items as required at site except those items as SUPPLY ONLY below to keep the DG Set along with AMF / Standard panel on monthly basis complete all as specified and as directed by Engr-in-Charge. 186 The contractor should attend any complaint / breakdown immediately on call basis and even no. of times without any extra cost. 187 Contractor should submit the inspection / maintenance report of every visit in spite of no of visits during breakdown calls including mentioning the status of DG Sets and spares any replaced 188 The old unserviceable spares replaced under comprehensive maintenance i.e. in sl No 02 of above BOQ is the property of contractor for which credit shall be deducted under respective items in schedule of credit. 189 All AMF panels and standard DG set panels should be well cleaned with CTC solution checking all the electrical connection and tighten for any loose connection. 190 Supply and replace of heavy duty diesel engine oil of 20W40 grade for DG Sets having capacities varying from 15 KVA to 35 KVA complete all as specified and as directed. 191 Supply only Lub Oil Filter for DG set 15 KVA to 35 KVA 192 Supply only fuel filter forDG set 15 KVA to 35 KVA 193 Supply only Oil pressure gauge for DG set of any size/make 194 Recharging of Battery 12 Volts , up to180 AH any make / type by replacing electrolyte including replacement of unserviceable terminal posts , to the required standard complete all as specified andas directed . 195 Diesel hose of size 5/16 all as directed 196 Battery terminals one end socket and the other end clamp type including brazing work and applying jelly over the battery terminal and pole all as directed by the Engr in charge 197 Water hoses complete set of engineDG sets of cap 15 to 35 KVA 198 Repairs to 12 V self starter of DG set engine by dismantling, removing and replacing the old defective/worn-out bearings, servicing including replacement of carbon brush, bendix drive, cleaning commutator in armature etc assembling and testing for satisfactory function all as directed. 199 Supply only auxiliary contactor suitable for AMF panel of 15 to 35 KVA DG set 200 Supply only power contactor suitable for AMF Panel of 15 to 35 KVA DG set 201 Supply, install, testing & commissioning in repairs DC relay card/ PLA relay 12/24 volt DC for DG set any capacity including making all electrical connections and checking by running the DG set for 02 hours complete all as specified and directed by Engr-in Charge, 202 Supply and mixing water coolant in radiator water of DG Sets having capacities varying from 15 KVA to 320 KVA complete all as specified and as directed. 203 Repairs to door of acoustic enclosure of DG set cap 20 KVA by taking down and replacing the door hinges and door lock including all M&L and as directed. 204 Supply only distilled water into battery capacity of 12/24 Volt 88/90/180 AH all as specified and as directed by Engineer-in-Charge. 205 Taking out old burnt out Automatic voltage regulator from DG setcapacity 15 KVA to 35 KVA alternator and replace with new AVR and includingtesting and checking voltage regulation ofthe DG set on full loadfor its satisfactory performance complete all as specified and directed by Engineer-in-Charge:- 206 M&L for dismantling of complete radiator assy for DG Set capacity 15KVA to 35 KVA from engine and taking out all, de scaling rusty, sludge and muddy particles inside the radiator by using of sodium hydroxide with water pressure cleaning complete, changing of radiator fan belt if required and re-fixing the radiator assy on its existing position and testing complete for its satisfactory performance with entire satisfaction of Engineer-in-Charge:- 207 M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm buried directly in ground level with top edge of earth plate at a depth not less than 1.5m below ground level connected to and including galvanized iron strip 25mm x 4mm as earthing lead by means of bolts, nuts, check nuts and washers etc made of GI and connected to earthing test point all as shown in electric plate No. 3 of SSR indicated and testing on completion including excavation and earth work in any type of soil/rock, PCC (1:3:6) type C-1 earthing chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B-1 reinforced with welded steel wire babric (APM) weight not less than 4 Kg/ Sqm, funnel with GI watering pipe of 20mm bore medium grade, wire mesh and lugs, GI protection pipe of 40mm bore medium grade 7.5 m long test point etc complete all as specified and as directed by Engr-in-Charge. 208 Providing and fixing 25mm x 5mm G.I strip in 40 mm Dia G.I pipe from earth electrode including connection with G.I Nut, bolt, Spring, Waher excavation and refilling etc. as required. 209 Supply & Fix in replacement MCB SP 6 - 32 Amp, C-curve, 415 volt AC complete all as specified. 210 Supply & Fix in replacement MCB SPN 6 - 32 Amp, C-curve, 415 volt AC complete all as specified. 211 Supply & Fix in replacement MCB TPN, 40 -63 Amp, C-curve, 415 volt AC complete all as specified. 212 Supply & Fix in replacement AMF controller, three phases, 50 Hz, AC, auto/manual/test/off mode with necessary display complete all as specified. 213 Material & Labour for dismantling the alternator of DG Set of capacity 20 KVA to 75KVA from its base by using chain and pulley after removing the coupling with the engine, removing all nut, bolt with washer and all electrical connection of the alternator, shifting the alternator to workshop by crane and vehicle, opening into parts, checking all winding like main stator/rotor winding, exciter stator/rotor winding. Rewinding the main rotor and exciter rotor by using the “F” class insulation and existing gauge and type of magnet wire which was on original motor, varnishing, heating, drying, greasing the bearing including replacement unserviceable bearing ,re-fixing the complete including connection to the terminal box of the alternator at workshop and shifting the same to the site, fixing the alternator to its base carefully by using chain and pulley, connecting it with existing engine including checking the alignment of alternator with engine connecting all electrical connection of the alternator and testing the DG set “OFF/ FULL LOAD” , matching to the existing range of RPM of the engine output voltage for 415 volt and testing complete all as per the direction of Engineer In Charge. 214 Material & Labour for taking down unserviceable heat insulation from exhaust piping and providing new heat insulation to exhaust pipe using 50 mm thick mineral wool inside the container & up to the exhaust stack. The insulation shall be cladded/ covered with 24G aluminium sheet. Pipe length shall be maximum up to12 Meter long from engineincluding necessary welding works, cladding works with wire mesh and aluminium foil, replace unserviceable supporting MC,angle iron 50 mm X 50 mm X 6 mm, suitable size flange, nut, bolt and washers as required includingweather cowl complete all as specified. 215 Material & Labour for dismantling carefully fuel injection pump (FIP) up to 6 cylinders engine of DG set and transporting to workshop, opening into parts, for maintenance, servicing, overhauling, tuning and calibration, adjustment of nozzle pressure and other controls, replacement of unserviceable spares, re-assembling, re-fixing the FIP on its original position including to and from conveyance charge from site to workshop and back complete all as specified. 216 Material & Labour for dismantling exhaust manifold from the engine to detect the smoke leak, clean the manifold including welding works, replacement of unserviceable spares, packing, bellows, nut, bolt, washers, insulators, etc. reassembling and re-fixing on its base, testing by running the DG set No LOAD/FULL LOAD complete all as specified. 217 S&F in repair 1.5 Sqmm three core PVC insulated, unsheathed multi stranded copper conductor flexible cable 1100 volts grade complete all as specified and directed by Engr in Charge. 218 M&L for preparation of old paintedsurfaces of the DG set and fuel tankof following capacity by cleaning oily and greasy spots using CTC and material and labour for one coat of synthetic enamel paint using spray machine to the fuel tank and one coat of heat resistance paint to Engine / alternator complete all as specified and directed. 219 Note: - Colour code to be followed as under:-(i) Engine body - OG.(ii) Alternator - Siemens grey(iii) Fly wheel guard - Red(iv)Radiator -Black(iv)DG set canopy/complete body with two coats of superior qualitysynthetic enamel paint using spray gun (Area of painting not exceeding 3 sqm) including writingof incoming/outgoing feeder with letters, MES/SM Nos etc completeall as specified. For DG Set capacity 15 KVA to 35 KVA 220 M&L for disconnection of Diesel Oil tank with inlet and outlet diesel pipe line hose/pipe and cleaning of complete oil tank and drain out slug, muddy oil particle complete and re-fixing after at the same place and connecting complete with existing system including marking of tank showing the capacity in Ltrs and replacement of transparent PVC pipe complete all as directed by Engineer-in-Charge:-For DG Set capacity15KVA to 35KVA 221 Supply, install, testing & commissioning in repairs controller- Procom DGC-6D Auto Mains failure control Module including Display, replacing contactors/Connectors and making all electrical connections good and renewed for up to DG set 35 KVA as per existing make complete all as specified and directed by Engr-in-charge. 222 M & L for Servicing of split type Air-conditioning unit comprising Indoor and Outdoor unit of any make/type having capacity 1.0/1.5/2 TR including attending breakdown including required tools and plants,minor electrical sparer like small piece of wire, insulation tape , screws required to rectify the complaints by replacing the spare partsin technical andresidentialbuildingat 14 ASC Kakkanad. Note: Spares required is measured and paid as respective items in Schedule A and all specified and directed by the Engineer - In - Charge. 223 Supply and charge refrigerant gas R-32/R-410 at site including testing all as specified and as directed by Engineer in charge . 224 Supply only Capacitor 36/40 MFD suitable for 230 V 50 HZ AC supply all as specified and as directed by Engineer in charge. Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 225 Supply only Capacitor 50/60 MFD suitable for 230 V 50 HZ AC supply all as specified and as directed by Engineer in charge. Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 226 Supply only Capacitor 80/100MFD suitable for 230 V 50 HZ AC supplyall as specified and as directed by Engineer in charge . Make: USHA / ASIAN / TESLA / EPCOS/ L & T/Keltron) 227 Taking out existing burnt fan motor single phase 230 Voltfrom the unit at site by carefully dismantling the same, taking out burnt copper winding and rewinding the same with super enameled copper winding wire of appropriate size and gauge, including replacement of defective bearing and bushes of existing size and standard make including varnishing to copper winding re-assembling the motor and testing the motor at medium and full load complete for the followingall as specified and as directed by Engineer - in - Charge. 228 Splittype AC capacity up to 1.5 Ton 229 Split type AC 2.0 Ton Capacity 230 Taking out old unserviceable PCB and replace the same with new PCB at site suitable for window/split type AC of capacity 1/1.5/2 TR all as specified and directed by Engg-in-charge 231 Taking out carefully existing defective sealed unit compressorSupply & fixing factory made rotary type sealed compressor unit same as per existing model and make including charging the gas and testing & commissioning under normal condition of following rating complete all as specified and directed by Engineer - in - Charge. 232 (a) Split type Ac 1.5/2.0 Ton capacity 233 Removing the damaged insulation of suction and discharge line & Supplying and fixing new Thermal sleeve insulation for suction line and discharge line including providing hard plastic tape over the thermal insulation of split type A/C 1.5 / 2.0 Ton capacity etc complete all as directed by Engineer - in - Charge. 234 M&L in replacement of old unserviceable remote by providing new remote suitable for window type/ split type AC of any capacity/any make as specified and directed by Engineer in Charge. 235 Supply only new capacitor of Fan motor of 4 MFD complete all as directed by Engineer - in - Charge. Make: USHA / ASIAN / TESLA / KELTRON / KEIL/ EPCOS. 236 Supply only new capacitor of Fan motor of 10 MFD complete all as directed by Engineer - in - Charge. Make: USHA / ASIAN / TESLA / KELTRON / KEIL/ EPCOS. 237 Suply only split type AC indoor unit oscillation motorcomplete all as directed by Engineer - in - Charge. 238 Supply only thermostat for split type AC 1.0/1.5/2.0 complete all as directed by Engineer - in - Charge. Make: INDFOSS / RANTROL / ANNAPURNA. 239 Supply & fix in replacement of factory made MS bracket or Stand duly painted suitable for outdoor unit of split AC including making good disturbed surfaces etc. , all as specified andas directed. 240 M & L Removing the split A/c unit from existing position, of capacity 1.5/2.0 Ton of any make and refix the same in other location by fixing the indoor and outdoor unit in position on fixing on wall/ floor as directed including piping refix the insulation, Gas charging filling the cavities on wall setting of grills alignment complete including, testing & commissioning to the entire satisfaction of Engineer - in - Charge. 241 Supply and fixreplacement 240V 20 Amp singlepole and earth enclosure with a two pin and earth plug and socket complete with one single poleMCB20 Amp SPAll as directedEIC .Make: Legrand , Cat No: 6078 41/Equivalent in L & T/Indo Asian. 242 Taking down the old sub main wiring and M/L for new sub main wiring with 2 run single core 4.0 sq mmPVC unsheathed copper multi stranded, FRLS conductor drawing into and including PVC conduit medium grade of size not less than 20 mm dia with all fittings and fixtures like L- bow, saddles etc of white/lvorycolour PVC conduit including multi stranded copper earth conductor 4.0 sq mm one run as earth continuity conductor all as directed by Engineer in Charge. 243 Supply and fixing in replacement of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make: Havells Cat Part No ENDURAPEARLNEOSL45LED757PASYTOPC or its equivalent make of Crompton/Bajaj/HPL/GM. 244 Supply, fixing, connecting and testing in replacement of 150 Watt LED flood light 230 Volt AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Havells Cat No JETAIRISFLS150WLED757PSYMLTG or its equivalent make of Crompton/GM/HPL. 245 Supply and fixing in replacement to ground with suitable pole mounting with OD of 76 mm, connecting and testing 40 Watt LED Post Top Luminaire, 230 Volt AC outdoor type with decorative post top for 360° indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Make: Crompton Cat Part No LPTO-40-CDL/M or its equivalent make of Havells/Bajaj/GM/HPL. 246 Supply and fixing passing through pole cable 3 core PVC insulated unsheathed multi stranded copper conductor of size 2.5 Sqmm from junction box to lightfitting all as directed by EIC. Make: Havells/Finolex/Poly cab. 247 Supply & fixing in replacement of transparent cover type street light junction box of size 168 mm x 253 mm x 115 mm made of high quality thermoplastic type with hinged and 4 Nos DIN mounted terminal suitable for 10 Sqmm XLPE cable, IP-66 (Dust and power jet Proof according to IEC 60529) , shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II ) made of halogen and silica free recyclable material, UV resistant having high grade gasket made of poly-urethane with copper bus bar 25 x 5 mm -04 strip, one noMCB SP 6 Amps with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable up to, 10Sqmm cable etc and fixing to the street light pole with 02 Nos, 25 x 3 mm thick MS clamps, nuts & bolt, etc. complete all as specified and directed. Make: Hensel Cat Part No KG 9002 or its equivalent make. 248 M & L for removal of existing treatment from PCC poles and applying two coats of weather proof exterior emulsion paint on old painted surface over a coat of primer, complete all as specified and directed by Engineer-in-Charge. 249 M&L for cleaning of feeder pillar/ panel after dismantling the Incoming and outgoing connections from MCBs and replacing the old unserviceable Gland, lugs, nuts & bolts, push buttons, indicating lamps, supporting insulators etc., and checking the serviceability of MCBs, cables and earth continuity conductor including replacement of worn out and unserviceable minor accessories all as specified and directed by Engineer-in-Charge.Note: Spares / materials charge for repair/replacement of worn-out parts shall be measured and paid separately under relevant items. 250 S & F in replacement of MCCB 4 Pole 100-125 Amps 415V 16 KA 251 S & F in replacement of MCB TPN63Amp, 4 Pole, C Curve 252 S & F in replacement of MCB DP 32-40Amp, C Curve 253 S & F in replacement of MCB SP 6 to 32Amp, C Curve 254 Comprehensive Maintenance, Servicing and carrying out periodical service to Voltage Stabilizer, servo type of capacity 63 KVA, 3 phase, 50 c/s, AC including along withrepairing/ replacing of all defective parts such as nut-bolts, washers and all other minor accessories as required at siteall as specified and directed by Engr in charge. Notes: 255 (a) Any additional parts required to be replaced will be measured and paid separately as Supply only against appropriate item of schedule. However labour element and painting involved in replacement are included in quoted rate against this item. 256 (b) Any minor repairs involved to make the voltage stabilizer functional if notified by the Engr-in-Charge shall be carried out by the contractor without any extra cost to the department. (c) Following parts (if renewed) shall be measured and paid separately under appropriate items at Supply only rates and unserviceable parts retrieved through replacement shall be measured under Sch of credit. 257 Disconnecting the complete unit of Servo Controlled voltage stabilizer of capacity 63 KVA, 3 phase, 50 c/s, AC supply of Make- Volteck or as per existing make and overhauling of the same by cleaning, servicing all serviceable accessories including painting with two coats of synthetic enameled paint externally after rubbing of old loose paint along with writing SM No. and capacity on the face of stabilizer and making all connections at both ends including providing lugs on existing cable and testing on full load after completion of repair / overhauling work complete all as specified and directed.NOTE: - (i) Supply only spare parts shall be measured and paid separately under relevant items of this schedule. (ii)Transportation charge / labour charge during the repair of voltage stabilizer from the site to workshop are included in the items of this schedule 258 Supply only following spare parts of 63KVA capacity Servo Voltage Stabilizer complete all as specified and directed: - 259 AC synchronous motor single phase, 50 Hz, 240 volts Make:UNI STEP or equivalent make suitable for volteck servo . 260 Variable auto transformer (Variac). 261 Sensing Transformer. 262 Carbon brush with holder complete. 263 Solid state sensing circuit. 264 RC Net work. 265 PCB connector. 266 Gear big. 267 Carbon fingers. 268 Variac Control CT. 269 Main Bushing with brass rod (insulator & rod). 270 High low cut off relay. 271 Series transformer. 272 Wiring Set. 273 Gear small. 274 Transformers oil filtering with test 275 Replacement of electronic control board 276 Fixing of top cover after repair and testing up to entire satisfaction of Engr in Charge. 277 Supply, installation, testing and commissioning of street light timer control panel, on pole/wall/floor mounting made out of CRCA steel sheet duly powder coated with locking arrangement, including internal wiring complete with bypass arrangements as per manufactures recommendation and design complete all as specified and as directed.Make: Havells Cat Part No IHXTS09120 or its equivalent make of above specification. 278 S&F bracket for fixing to street light poles, made out of suitable dia for fitting of LED street light fittingsmedium grade GI pipe bend to shape inclusive of one primer coat, one under aluminium coat and one aluminium finishing coat of paintall as directed by the Engineer-in- Charge. Make: TATA / Jindal / Surya Praksh. 279 Supply, install, test and commissioning of outdoor type double door LT Feeder pillar box made out of 3.15 mm thick CRCA sheet outdoor type totally enclosed weather dust and vermin proof as per IS , CPRI Approved with front opening suitable locking arrangement having copper bus bar of 300 Amp capacity for RYB and half for neutral and insulated with insulators, including connecting incoming and outgoing cables necessary PCC 1:3:6 in foundation and made out of 50 mm x 50 mm x 6 mm angle iron grouted at ground above 30 cm from ground level comprising of the following etc complete all as specified and directed by Engineer-in-Charge. Note: Cost of necessary internal wiring from bus bar to MCCBs/MCBs/Enclosure connections etc shall be deemed to be included in the unit rate. 280 Incoming:(a) MCCB 200 Amp 4 pole 36 KA Ics=100% of Icu with spreader & rom -01 No. (b) Indication Lamp Red/Yellow - 03 No (c) SP MCB 6A -03 Nos (d) MFM Meter with CT- 01 No (g) Provision for installation of KESB 3 Phase meter with necessary accessories. 281 Outgoings.(a) 125 Amp 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No (b) 100 Amp 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No (c) 63 A 4P MCCB 25 KA Ics=100% of Ics with spreader & rom -01 No.(d) 32 Amp 4 MCCB 16 KA, Ics=100% of Ics with spreader & rom -01 No. 282 M & L for re-filling of chemicals (minimum 25-30 ltrof Bentonite chemical / Graphite compound for each earth pit) in existing chemical earthing at technical area for achieving satisfactory earthing value with comprising of the Bentonitecomponents including necessary excavation/drilling for lift of cylindrical copper tubes from the ground and re-fixing the same by using Rig machine and providingenclosure with heavy duty plastic cover having locking arrangement including changing of electrode with pure copper chemical earthing electrode (length ofRod : 3 mtr Approx) for excellent conductivity & work efficiencycomplete all as specified and as directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 9
32.
Health and Family Welfare #10782310 Price Bid
Supply Of Consumable Dental Material, Glass Wares, Surgical Items, Chemicals And Burs At Government Dental College And Hospital, Jalgaon, Dist. Jalgaon - 425 001 For The Year Of 2024-2025. , Microslides 75X25x1.30Mm(Blue Star) , Cover Slip 22X40mm (Polythene) , Cover Slip 22X22mm (Squqre) , Cover Slip 22X22mm (Round) , Mouth Probe , Mouth Mirror ( Imported / Indian) , Mouth Mirror Top ( Imported/ Indian) , Irm (Densply ) , Dycal ( Densply) , Alginate ( Oricam) , Cavity Varnish (Gc./ Indian) , Hight Copper Alloy( Dpi) , Mercury( Prime Dental) , Gc Gold Gic Type 1 ( Gold Label) , Gc Gold Gic Type 2 Restoretive ( Gold Label) , Cmcp ( Vishal) , Kavo Dental Oil Spray (Kavo) , Eugenol (Dpi / Prime) , Zinc Oxide Powder ( Ammdent / Prime) , Apf Gel( Fluorotop) , Foism Tray (3 Small 3 Large) (Denmax) , Calcium Hydroxide Powder , Etchent 37% Syringe ( Ammdent/ Dtech) , Acrylic Cold Cure Liquid And Pink Powder ( Dpi) , Acrylic Heat Cure Liquid And Pink Powder ( Dpi) , Seperating Medium (Prime) , Zinc Phosphate Cement (Harvard) , Green Stick Compund ( Prime) , Rubber Base Impression Material Zeta Plus , Light Cure Materials Shade A1, A2, B1, B2 ( Fusion/ Prime ) , Articulating Paper (Gsm -100 Microns) 16Red 16Blue ( Deepti) , Matrix Band No 1 , 8 , Formacresol (Shellac / Local) , Base Plate , Sand Paper ( Fine Grit 10 Sheets, Medium Grit 10 Sheet) , Rubber Dam Sheet 6X6 (Gdc) , Dental Stone ( Neelkanth) , Dental Plaster Of Paris , Zoe Impression Paste ( Prime) , Spacer Wax Upper Lower (15 Each) , Mbt 018 Bracket Kit , Niti Euro 014 Upper / Lower , Niti Euro 016 Upper / Lower , S.S Wire 19,21,22,23,24 Guage , Pearl Die Stone (1Kg) (Pearl) , Rc Solvent(Prime) , Polishing Paste ( Prevest / Prime) , Teeth Set Complete 1X28 (Identical ) , Teeth Set 1X16 , Teeth Set 1X6 (Upper / Lower) , Teeth Set 1X6 (Zero Degree) , Dpi Impression Compound , Modelling Wax , Composite Bonding Agent 7Th Generation , Green Inlay Wax , Mta (Safe Endo) , Blue Inlay Wax (Maarc) , Acrylc Polishing Cake (Sammit) , Beading Wax , Boxing Wax , Resorbable Collagen Membrane (Colo Guide) , Ultrasonic Tips. Supragingival ( Woodpecker) , Ultrasonic Tips Subgingival ( Woodpecker) , Ultrasontc Tips -(For Endodonics) ( Woodpecker) , Composite Splint Material (Prevest) , Fibre Splint Matertal ( Devgen) , Metapex , Mbt 022 Bracket Kits ( U U Ortho) , Roth 022 Bracket Kits ( Red Ortho) , Elastomeric E Chain Grey Colour , Intra Oral Elastics Green Colour , Bondable Lingual Buttons ( Addler) , Bondable Single Molar Tubes Mbt 022 ( Ortho) , S S Wires 16 X 22 Upper And Lower ( Ortho) , S S Wires 17X 25 Upper And Lower , S S Wires 19 X 25 Upper And Lower , E Chain Short Clear , Light Cure Orthodontic Bonding Ahesive And Primer , Rcs Niti Arch Wire , Band Material Molar 180X006 Size , Lingual Sheaths , Intraoral Elastics Pink Colour , E Chain Long Clear , Intraoral Elastics Red Colour , Intraoral Elastics Blue Colour , Niti Archwires Ovoid 014 Upper / Lower ( U Ortho) , Niti Archwires Ovoid 016 Upper / Lower ( U Ortho) , Expension Screws Upper Arch ( Dentaurum) , Expension Screws Lower Arch( Dentaurum) , Leica 818 High Profile Microtome Blades , Periodontal Pack , Paedric Iopa Xray Film , Adult Iopa Xray Film , Occusal X Ray Film , X Ray Developer Powder ( Bro Max) , X Ray Fixer Powder ( Bro Max) , Laser Film Dry View Dve ( Caresteam) Size 8X12 And 5X7 , Extraoral Xray Films Ujfil M, Size 8X10 10X12 And 5X7 , Hacrantosylin Etutich , Eosin , Lesihman Stain , Praffin Wax (58-60 0 C Non Cracking) , Xyline (Sulphur Free) (Sigma) , Hacnatoxylin Harris , Crystal Violet ( Sigma) , N /10 Hcl 500Ml , Cederwood Oil ( Immersion Oil) ( , Surgical Spirit , Glycerine , Iodine , Karsolex (Rapid) , Xyloquire Plain Adrenaline 2 % , Xyloquire Plain Without Adrenaline 2 % , Xyloquirejelly Tube , Schiffs Reagents , Dettol , Absolute Alchol , Nitric Acid Lr , Dpx Mountant , Handwash , Liquor Ammonia , Ez Cleaner For 3 Parts Haematology , Prob Cleaner For 3 Parts Haematology , White Petrolium Jelly , Cidex Solution (Aps) , Normal Saline , Sodium Hypochlorite 3% , Hydrogen Peroxide 6% , Glocuse Powder , Rbc Diluting Fluid , Wbc Diluting Fluid , Antisera ( A B D) , Sodium Bicarbonate , Liquid Phenol , Gum Acacia , Calamine Powder , Bentonite , Sodium Citrate , Liq. Paraffin , Diluent (Erba) , Gp Points Standardized15-40 , Gp Points Standardized45-80 , G.P Points No. 15 , G.P Points No. 20 , G.P Points No. 25 , G.P Points No. 30 , Protaper Guttapercha Point , Gp Points No. F1,F2,F3 , Diamond Bur For Contra Angle Handpiece Round , Diamond Bur For Contra Angle Handpiece Round Inverted Cone 010 012 , Diamond Bur For Contra Angle Handpiece Straight Fissure 010 012 , Diamond Bur For Contra Angle Handpiece Tapered Fissure 009 010 , Diamond Bur For Airoter Handpiece Round , Diamond Bur For Airoter Handpiece Inverted Cone 010 012 , Diamond Bur For Airoter Handpiece Straight Fissure 010 012 , Diamond Bur For Airoter Handpiece Tapered Fissure 009 010 , Diamond Bur For Airoter Handpiece Long Shank - Inverted Cone 010 012 , Diamond Bur Forairoter Handpiece Long Shank - Straight Fissure 010 012 , Finger Spreader , Finger Plugger , H File 15-40 (1-6) 25Mm , H File 15-40 (1-6) 21Mm , H File 45-80 (7-12) 25Mm , H File 6/8 , H File 15/20/25/30 , Protaper Hand File S1,S2,F1, F2 25Mm , K File 15-40 (1-6) 25Mm , K File 15-40 (1-6) 21Mm , K File 45-80 (7-12) 25Mm , K File 6/8/10 , K File 15/20/25/30 , Root Canal Broaches , Root Canal Reamers 25Mm 15-40 (1-6) , Root Canal Reamers 25Mm 45-80 (7-12) , Protaper Rotary Files (Sx, S1,S2,F1, F2) 25Mm , Protaper Rotary Files (Sx, S1,S2,F1, F2) 21Mm , Cotton Buff Small Size , Carbide Bur Round, Cylindrical , Straight , Aplphine Carborandum Points Chp , Acrylic Trimmer , Non Absorable Surgical Suture 3-0 , Diposable Mask , Sterile / Non Sterile Surgical Gloves No 6 , Sterile / Non Sterile Surgical Gloves No 6.5 , Sterile / Non Sterile Surgical Gloves No 7 , Sterile / Non Sterile Surgical Gloves No 7.5 , Edta Vacutainer Tube , Examination Gloves , Arch Bar , Stainless Steel Wire Of 26 Guage For Oral Surgery , Surgical Blade No. 11 , Surgical Blade No. 12 , Surgical Blade No. 15 , Disposable Needle 26 Guage 1.5 Inches , Disposable Syringe 2 Cc With Needle , Disposable Syringe 5 Cc With Needle , Disposable Surgical Dental Drape , Non Absorable Surgical Suture 3-0 , Stainless Steel Suture Needle No 18 Half Circle Triangular , Bandage Gauze , Black Silk 3-0 , Absorable Surgical Suture 3-0 , Adhesive Plaster (Ip /Usp) , Resorbable Vicryl Sutures 4-0 , Resorbable Vicryl Sutures 5-0 , Surgical Blade 15C , Disposable Head Caps , Disposable Suction Tip , Cotton Roll , Biomedical Waste Bag -Red , Biomedical Waste Bag -Black , Biomedical Waste Bag - Blue , Biomedical Waste Bag- Yellow , Crown And Bridge Preparation Kit
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Maharashtra View Result →
33.
Defence #10733972 AOC
Tender For Special Repair To Smqs Of Djp At Af Stn Vadodara - Taking down chowkats or frame exc 1.5 Sqm and n exc 4.0 Sqm each (without taking off shutter from the fram) all as speified and as directed. 2 Taking down chowkats or frame nexc 1.5 Sqm each (without taking off shutter from the frame all as speified and as directed. 3 Taking down shutter only of any description exc 1.0 Sqm n exc 2.0 Sqm and removing all as speified and as directed. 4 Taking down shutter only of any description n exc 1Sqmand removing all as speified and as directed. 5 M&L for35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc(without shash bar ) edges of framing plain chamfered or rounded filled with cut and mitered beads for securing, glass etc size of member of shutter as per specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats and directed by Engg. In Charge. 6 M&L forFactory made flush shutters 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in shutter all as specified and as directed. 7 S&Fsolid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete 8 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawingspecification and drawing complete 9 M&L Factory made flush shutters 25mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter as in shutter all as specified and as directed.. 10 S&F 75mm long SS butt hinges and fixed to frame with scrwewd or welding complete.. 11 S&F200mm long aluminium anodized barrel tower bolts of extruded section and fixed. 12 S&F150mm long aluminium anodized barrel tower bolts of extruded section and fixed 13 S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm. 14 S&F150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. 15 S&F100mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge. 16 S&FHasp and staple, safety type aluminium anodized including bolt to hinge plate and fixed with screws 100 mm size complete all as specified and directed. 17 S&F in repair door stopper of aluminum alloy body and tongue double legged anodized with hard draw steel spring over all length of cover plate 150mm fixed in floor all as specified (ISI Marked). 18 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,plaster work on edges during fixing (if required)etc all complete as per architectural drawings and the directions. 19 S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples. 20 S&F 4mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified 21 M&L for Pressed steel frames(105 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete, as specified, 22 M&L forPressed steel frames(125 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified, 23 S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework or water tanks and similar work conforming to Fe 290 Gde-E-165. 24 M&L forFramed work( Fe 290 gde E 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing complete all as specified and as directed 25 M&LforPreparation of new steel surfaces and applying with 2 coats synthetic enamelpaint of any description, over 10cm in width or girth, not otherwise described over a red oxide primer complete all as specified 26 M&L for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer. 27 M&L for Mild steel, plain, black sheet 1.00 mm thickin wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as require all as directed 28 S&F mild steel hold fast etc conforming to Fe-410-0 or 310-0. 29 M&L for cutting holes in brick wall for inserting hold fast etc. built in CM of depth exc. one brick but n. exc. two brick thick wall making good dismantled portion in cementmortar in (1:3) orPCC (1:2:4) type B1 as specified. 30 Demolition of Reinforced cement concrete staircases, landing, chajjas and similar suspended work all as specified and directed. 31 M&L for Separating, scraping and cleaning of reinforcement (Demolition of concretemeasured separately) all as specified and directed. 32 M&L for design Mix RCC M-30 ( 20mm graded aggregate) in stairways(except spiral staircases)including steps (square or spandril), string pieces, carriages, etc., complete, anysection straight or winding, but excluding landings all as specified and directed. 33 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips 34 M&L for formwork of rough finished flat concrete surface for staircases with sloping or stepped soffits including risers and stringers (excluding landing) all as specified and directed. 35 Demolition of Cement Concrete any description and in any position not otherwise specifically provided for all as specified and directed. 36 M&L for Cement concrete 75mm thick as in plinth protection type C-2,1:3:6 (40mm graded aggregate)even and soomth finished surface without using extra cement. 37 M&L for 75 mm thick Cement concrete Type D21:4:8 (40 mm graded gradedaggregate) as in sub bases,floor finishes and pavings. 38 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 39 M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. 40 M&LNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.18 SQM but not exceeding 0.38 SQM, as in skiting,/ vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified. 41 M&LNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular)area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. 42 M&L for coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match. 43 M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed. 44 M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls all as specified and directed. 45 Demolition of stone slabs and tiles of any description or any thickness, laid bedded and pointed in any mortar. 46 M&Lfor Machine cut Pre polishedkota stone slab flooring 20-25 mm thick over and incl 15mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in single piece as in window cill, stairscase and Kitchen platform etc. 47 Taking up or down steel tubing and connections for 15mm bore, including cleaning for refixing or removal to store 48 Taking up or down steel tubing and connections for 20 mm bore, including cleaning for refixing or removal to store 49 S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, 50 Fixing only 15mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified 51 S&F 20mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors, 52 Fixing only 20mm bore GI water tubing medium grade in any length including all fittings fixed to wall or laid in floor complete all as specified 53 Dismantling water tanks exc 200 ltr & n exc 500ltr capacity and removing to store 54 S&F 500ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified. 55 S&F 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed. 56 S&Fin repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm dia pipe 57 S&F in repair vitreous china wash hand basin, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed. 58 S&F in repaivitreous china pedestal pattern white (excluding fixing both flushing cistern and flush pipe) complete all specified . 59 Supply & fixing in repair plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinged device fixed in repairs. 60 S&F in repair 10 litres capacity PVC valveless symphonic action type, flushing cistern, flush pipe of polyethylene of low or high density or PVC. 32 mm dia for low level cistern, white, with inlet, ball valve float handle including brackets all as specified. 61 S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube andABS wall hook including making connections and fixed in position complete in all respect as specified . 62 S&F 32mm brass chromium plated waste coupling for wash hand basin all as specified 63 S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down high pressure, with or without lettered Hot or Cold withlong screwedshanks and fly-nuts, screwed for iron pipe and fixed to 15mm bore pipe all as specified. 64 S&F in repair Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe. 65 S&F in repair Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed bothends for iron pipe or for unions and fixed to15mm bore pipe complete all as specified. 66 S&F in repairConcealed type Stop valves, fancy type,chromium plated with long shank and cup cast copper alloy,screwed down, high pressure,screwed bothends for iron pipe or fo runions and fixed to15mm bore pipe complete all as specified. 67 S&F in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union to15mm bore pipe complete all as specified. 68 S&Fin repair 32/40mm PVC waste pipe for wash hand basin & kitchen sink, 600mm long complete all as specified 69 S&F PVC connection 15mm size with PTMT nuts of length 600 mm complete all as specified. 70 S&F Tubular Towel Rail 20 mm dia 600mm long between flanges Brass Chromium Plated fixed complete all as specified 71 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified . 72 S&F Soap dish, any type, fixed to plugs with chromium plated brass screws. 73 M&L for Treatment to sunken portion including demolition of existing tiles and PCC of sunken floorand provn of 40mm thickPCC 1:2:4 type B1astop layer and10mm thick plaster in CM 1:4 with WPC Liquid complast 421 in bottom and sides of sunken potion and applying one coat each of Nitroproof 100 and Nitroproof 120 on plastered surface. Rendering with 10mm thick plaster in CM 1:4 mixed with complast 421 in sunken portion of WC as in second layer including jointing of CI pipe joint , provn of GI spout with 40mm dia pipe up to 30cm with water tight joint from the external surface of wall andfilled with PCC1:5:10 type E2 as lean concrete up to the required level as directed by Engr in Charge 74 Demolition and breaking up drain pipes (CIdrain pipes /PVC/ AC or Reinforced concrete) set in cement mortar (100mm dia), if required complete all as specified and directed. 75 S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor all as specified and directed. 76 S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or in trenches or in floor all as specified and directed. 77 S&F in repair 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed. 78 S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed. 79 S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal all as specified and directed. 80 S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequalall as specified and directed. 81 S&F 110mm bore PVC (SWR) couplers 82 S&F 75mm bore PVC (SWR) couplers 83 S&F 75 mm bore PVC (SWR) bends any radius 84 S&F 110 mm bore PVC (SWR) bends any radius 85 S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and waste coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm 86 S&F in repair Stainless Steel plate rack 1mm thick of Size 31x36x10 fixed in position complete all as specified 87 S&F25 mm dia curtain Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc. fixed complete as in repairs all as specified and directed 88 Taking dawn cementplaster any description on brick or stone wall/ celling including raking out joint, haking for key scrubing with water etc. 89 M & Lfor 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonry wall, finishedeven and smooth with thin layer of sagol. 90 M & L for 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compound on faces of brick masonry wall, finished even and fair etc complete. 91 M&L for Rendering 5mm thick on concrete surface of ceiling CM 1:3 finishing the surface fair and even complete all as specified and directed. 92 M&L for Preparation of new plastered surface of wall and applyingtwo coats of exterior acrylic emulsion paint over a coat primer complete all as specified and directed. 93 M&L for Preparation of new surfaces of wallrubbing down andapplying two coats of oil bound distemper over application of chalk whiteningcompleteall as specified as directed 94 M&L for preparation of new plastered wall surface and applying three coats of white wash on ceiling surface complete all as specified and directed 95 M&L forComplete removal of existing treatment and applytwo coats of exterior acrylic emulsion over a coat of primer incl preparation of surface complete all as specified 96 M&L for Complete removal of existing treatmentandapplying two coats of oil bound distemper over application of thin layer of putty with surface preparation complete all as specified as directed 97 M&Lfor Complete removal of existing treatmentandapplying three coats of white wash on ceiling complete all as specifiedas directed by Engineer -in-Charge. 98 M&L for Preparation of old surfaces and apply 3mm thick putty on wall/ceiling finished complete allas specified 99 M&L for Filling surface cracks not exc 5 mm to 7 mm wide with Dr Fixit cracks X power or equivalent polymer modified cracks filler all as per manufacturersinstructions and as directed by Eng-in-Charge. 100 Removing of existing unserviceable water proofing treatmenttaking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises. 101 M&L for Applying cold bituminous primer @ 0.30 Ltr / Sqm conforming to IS 3384 laying APP polymer modified membrane 3mm thick 3 Kg/Sqm in weight with non-woven polyester reinforcement with plain finish and sealing all overlaps of 75mm in length side and 75mm on width side of membrane by torching the same as per manufacture instruction and all as per particular specification including application of solar reflective aluminium paint all as specified and directed by Engr-in Charge Note:-(a) Rate quoted deemed to be inclusive of cleaning of surface to be treated properly to receive the primer and all as directed by the Engr-in-Charge.(b)Necessary guarantee certificate shall be given by the manufacturer for the material for 10 years from the date of completion of work.(c) APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on vertical position and 30cm on horizontal position shall be done with proper attention and work carried out by authorised applicator only. Main portion of roof treatment shall be commenced only on completion of corners/edges/junctions.(d) APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum.(e) Ensure while laying the treatment no bulging on surface/voids shall be found and proper care/attention be given for the treatment.(f) If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be consider.(g) Contractor shall produce the certificate from the manufacturerer for the authorised applicator before commencement of work. 102 M&L for 10mm thick plastringin CM 1:4 mixed with WPT 3% by weight of cementfinished even and smooth with out using extra cement onroof surfacesfor laying WPT complete all as specified and as directed by Engr-in-Charge. 103 M&L for PCC 1:2:4 Type B-0 using 12.5mm graded aggregate laid to slope 1:30 in padding for WPT over roof slab, filling of pressed steel door frame complete all as specified and directed by Engineer-in-Charge. 104 M&L PCC 1:2:4 Type B-0 using 12.5mm graded aggregate as in cover fillet of 75 mm radius at junction of roof slab and parapet wall etc complete all as specified and directed by Engineer-in-Charge. 105 Supply only integral water proofing compound. 106 Demolition of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified 107 M&L for Brick work with sub class B bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified 108 Removing building materials etc. (other than spoil payable under items 03028 to03031 in Section-3—Earthwork) to a distance of 1.0 KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. 109 Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed. 110 Taking down sub main wiring copmlate including removing materials from site and making good disturbed surfaces complate all as specified and as directed. 111 M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed (FRLSH) multistranded copper conductor cable 1100 volt grade enclosed in and including drawn through existing PVC conduit concealed wiringwith accessoriesby means of PVC sleeves Dash fastners and cadmium plated screws all as per ISI including sunk type boxes for mounting fitting like switches, socketes fan regulators with 3 mm thick phenolic Laminated sheet top covers concealed in walls etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly.Make of wire/cable: Havells, Finolex, Anchor 112 (a)One light point controlled by one one/way switch. 113 (b)One Fan/Exhuastfan point controlled by one,one way switch. 114 (c) One 3 pin 5 Amps socket outlet on same board with other switch. 115 (d) One 3 pin 5 Amps socket outlet on independent board with other switch. 116 (e ) One bell point controlled by one, oneway switch 117 (e ) One light point controlled by twoway switch 118 All as per item No.111 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable (FRLSH) as earth continuity conductor for one 5 pin 15 Amps power socket outlet point on independent board complate all as specified and as directed. 119 M & L forpoint wiring in concealed conduitcomplete with multistranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable 1100 volt grade (FRLSH), conforming IS 694 & color code drawing in concealed conduit complete, with repalcement ofsunken in pressed steel terminal boxes of available size with providing modular top cover platewith all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit inclding arrangements for modular /regular fittings acessories complete all as specified. 120 (a) One light point controlled by one, one way switch. 121 (b) One Fan point controlled by one,one way switch and regulator. 122 (c ) One 3 pin 5 Amps socket outlet on same board with other switch. 123 (d) One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size. 124 (e ) One bell point controlled by one way switch 125 (f ) One light point controlled by two 2 way switch 126 All as per item No.111 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 2.5 sqmm copper conductor unsheathed cable (FRLSH) as earth continuity conductor for one 5 pin 15 Amps power socket outlet point on independent board complete all as specified and as directed. 127 M&L for sub main wiring using two run single core 6 Sqmm fire retardent PVC insulated and unsheathed cable with copper conductor 1100 vots grade, FRLSH & ISI mrked complete with PVC conduit accessories like bends tees etc and PVC insulatd copper cable 6 Sqmm for earth wire and connecting to earth dolly, complete all as specified and as directed. 128 M&L for sub main wiring using two run single core 4 Sqmm fire retardent PVC insulated (FRLSH) and unsheathed cable with copper conductor 1100 vots grade, ISI mrked complete with PVC conduit accessories like bends tees etc and PVC insulatd copper cable 4 Sqmm for earth wire and connecting to earth dolly, complete all as specified and as directed. Notefor item No 115 & 116 : Two run of main wire, one run of earth wire & one run of PVC conduit shall be measured as one unit. 129 S&F switch piano modular flush type single pole one way 5 Amp 240 Volts complete all as specified and as directed. 130 S&F switch piano modular flush type single pole one way 15 Amp 240 Volts complete all as specified and as directed. 131 S&F bell push 6 Amp modular single pole one way 240 Volts complete all as specified and as directed. 132 S&F switch piano modular type two way5 Amp 240 Volts complete all as specified and as directed. 133 S&Fsocket6 /16 Amp modular 2/3 pin combined 2 module flush type complate all as specified and as directed. 134 S&Fsocket6 /16 Amp modular 2/3 pin combined 2 module flush type complete all as specified and as directed. 135 S&F ceiling rose modular surface PVC/bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked. 136 S&F modular electronic fan regulator heavy duty type A/C 240 V complete all as specified and as directed. 137 S&F in DBsSheet metal enclosure for SPN DB 12 waytype 240 volts and 200 Amp ratings bus bar complete allas specified and directed. 138 S&F MCB in the DBs as under : 139 (a). MCB SP Isolater up to 40 Amp, 240 volts. 140 (b). MCB SPN Isolater upto 63 Amp, 240 volts. 141 Supply and fixingLEDTubelight fittingENERGY Efficient 20 Watt 2000 lumen bright lighthours complete all as directed by Engr-in-charge. 142 Supply and fixingLEDTubelight fittingENERGY Efficient 10 Watt 2000 lumen bright lightcomplete all as directed by Engr-in-charge. 143 Supply and fixingLEDwall mounted fittingENERGY Efficient 9 Wattambient lighting made from engineering grade polymer with prismatic diffuser, aesthetic disign suitable for LED bulb. 144 Supply and fixing LED security light luminaire 35 Watt freedom , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete. 145 Supply and fix in replacment bracket for security light made up of 25 mm dia, 1.0 mtr long GI pipe, light grade, bent to required length, fixed to wall either clamps made of 20x3 mm mild steel flat minimum 15 cm long, 4 nos 8 mm dia bolts with nut complete including taking down old unserviceable all as speified and directed by Engr in Charge. 146 S&F bell ding dongtype A/C 240 V complete all as specified and as directed. 147 Supply & fix single pole and neutral encloser with a two pin and earth plug and socket complete with20 amp SPMCB complete all as specified and as directed. 148 Taking down serviceable exhaust fan from site cleaning the body and blade, painting and servicing complete and refixing the same location complete all as specified and as directed. 149 Taking down serviceable ceiling fan from site cleaning the body and blade, painting and servicing complete and refixing the same location complete all as specified and as directed. 150 Taking down unserviceable geyser with complete fittings and PVC connection including all fittings and fixtures from site and depositing at MES store as directed. 151 M&L for providing earthing complete with GI earth plate electrode 60 x 60cm x 3.15mm thick buried directly in ground (Earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to copper earth lead 4 MM GI wire upto 7.5 meter long by means of bolts,nuts check nuts and washers of all galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-1 and connected to test point including necessary excavation/ earth work in any type of soil/rock strata, PCC 1:3:6 type C1, cement concrete 1:2:4 type B1 reinforced with welded steel wire fabric (AMP) not less than 4 KG per Sqm, funnel with wire mesh and watering pipe 15 mm dia bore (GI light grade), PCC pit with 50mm thick PCC cover etc. including testing on completing including GI protection pipe 15 mm dia medium grade for earthing lead complete all as specified and directed including .
Contract Date: Apr 24, 2026 Contract Value : 56.10 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 7
34.
Educational and Research Institute #10691357 Price Bid
Rate Contract For Procurement Of Drugs And Medicine At Aiims Bathinda - 2 23.5% Nacl ( Fluid ) N / S 500Ml 3 2-Pyridine Aldoxime Methiodide 25 Mg 4 3% Nacl ( Hypertonic Saline 100Ml 5 3% Nacl ( Hypertonic Saline 50Ml 6 5 Essential Trace Elements 7 5-Deoxy-5-Fluorouracil 1000 8 5-Flucytosine 9 7.5% Nacl 10 Abacavir Sulphate 600Mg And Lamivudine 300 Mg 11 Abatacept 250Mg 12 Abciximab - 2Mg 13 Abciximab 12 Mg 14 Abirateron 200 Mg 15 Abiraterone Aceate 250Mg 16 Absolute Alcohol 17 Acarbose 25Mg 18 Acarbose 50Mg 19 Acebrophylline 100 Mg 20 Acebrophylline 200Mg 21 Aceclofenac+Rabeprazole+Paracetamol 22 Acellular Variant Of Dpt Vaccine 23 Acelofenac 100 Mg + Theocolchicoside 4 Mg 24 Acelofenac 100 Mg + Theocolchicoside 8 Mg 25 Acelofenac 100Mg 26 Acelofenac+Paracetamol ( 100+500 ) 27 Acelofenac+Serratiopeptidase 28 Acelofenac100mg+Paracetamol 500Mg+Serratiopeptidase 15Mg 29 Acetaminophen Ip 325Mg, Tramadol Hydrochloride Ip 37.5Mg 30 Acetaminophen Suppository 125 Mg 31 Acetaminophen Suppository 170 Mg 32 Acetaminophen Suppository 250 Mg 33 Acetaminophen Suppository 80Mg 34 Acetazolamide 250 Mg 35 Acetazolamide 250 Mg 36 Acetominophen+Dextopropoxyphen 65+325Mg 37 Acetominophen+Propoxyphene Napsylate 400+100Mg 38 Acetycysteine And Ambroxol 39 Acetyl Cysteine 200 Mg 40 Acetyl Cysteine 600 Mg 41 Acetyl Cysteine Solution 20% 2Ml 42 Acetyl Cysteine Solution 20% 5Ml 43 Acetyl Salicylic Acid 100 Mg 44 Acetyl Salicylic Acid 150 Mg 45 Acetyl Salicylic Acid 150Mg + Atorvastatin 10 Mg 46 Acetyl Salicylic Acid 150Mg + Atorvastatin 20 Mg 47 Acetyl Salicylic Acid 350Mg 48 Acetyl Salicylic Acid 75Mg 49 Acetyl Salicylic Acid 75Mg + Atorvastatin 10 Mg 50 Acetyl Salicylic Acid 75Mg + Atorvastatin 20 Mg 51 Acetyl Salicylic Acid 75Mg + Clopidogrel 75Mg 52 Acetyl Salicylic Acid 75Mg + Clopidogrel150mg 53 Acitretin 25 Mg 54 Acotiamide 100 Mg 55 Activated Charcol / Gasex 56 Activated Prothrombin Complex Concentrate 500 Iu 57 Active Ingred. -L-Omithine-L-Aspartate 58 Active Ingrediatent L-Omithine -L-Aspartate 59 Acton Prolongatum ( Acth ) 60Iu Vial 60 Actyl Cystine 600 Mg 61 Acyclovir 200Mg 62 Acyclovir 250 Mg 63 Acyclovir 400Mg 64 Acyclovir 800Mg 65 Acyclovir Eye Oint. 66 Acyclovir Skin Oint. 67 Adalimumab 40Mg Pfs 68 Adapalene Gel 69 Adapalene+Clindamycine Gel 70 Adefovir 10Mg 71 Ademetionine Ion 400 Mg. 72 Adenosine 30Mg 73 Adenosine 6Mg / 2Ml 74 Adrenaline Bitartrate 75 Adrenaline Intracarmel ( Opth. ) 76 Adrenochrome 0.75Mg / Ml, 2Ml 77 Aecelofenac 200 Mg 78 Afatinib Dimaleate 20 Mg 79 Afatinib Dimaleate 30 Mg 80 Afatinib Dimaleate 40 Mg 81 Afatinib Dimaleate 50 Mg 82 Aflibercept 83 Al Transretenoic Acid 84 Albandazole 10Ml. 85 Albandazole 400Mg 86 Albumin 20% 100Ml 87 Albumin 20% 50Ml 88 Albumin 20% 50Ml, Self-Collapsible Bag 89 Albumin 20% Low Salt 100 Ml, Self-Collapsible Bag 90 Albumin 20% Low Salt 50Ml, Bottle 91 Albumin 20% Low Salt 50Ml, Self-Collapsible Bag 92 Albumin 25% 100Ml, Bottle 93 Albumin 25% 100Ml, Self-Collapsible Bag 94 Albumin 25% 50Ml, Self-Collapsible Bag 95 Albumin 25% Low Salt 100 Ml, Bottle 96 Albumin 25% Low Salt 100 Ml, Self-Collapsible Bag 97 Albumin 25% Low Salt 50Ml, Bottle 98 Albumin 25% Low Salt 50Ml, Self-Collapsible Bag 99 Albumin 4.5% 100Ml, Bottle 100 Albumin 4.5% 100Ml, Self-Collapsible Bag 101 Albumin 4.5% 250Ml, Bottle 102 Albumin 4.5% 250Ml, Self-Collapsible Bag 103 Albumin 4.5% 500Ml, Bottle 104 Albumin 4.5% 500Ml, Self-Collapsible Bag 105 Albumin 4.5% 50Ml, Bottle 106 Albumin 4.5% 50Ml, Self-Collapsible Bag 107 Albumin 4.5% Low Salt 100 Ml, Bottle 108 Albumin 4.5% Low Salt 100 Ml, Self-Collapsible Bag 109 Albumin 4.5% Low Salt 250Ml, Bottle 110 Albumin 4.5% Low Salt 250Ml, Self-Collapsible Bag 111 Albumin 4.5% Low Salt 500Ml, Bottle 112 Albumin 4.5% Low Salt 500Ml, Self-Collapsible Bag 113 Albumin 4.5% Low Salt 50Ml, Bottle 114 Albumin 4.5% Low Salt 50Ml, Self-Collapsible Bag 115 Albumin 5% 100Ml 116 Albumin 5% 100Ml, Self-Collapsible Bag 117 Albumin 5% 250Ml 118 Albumin 5% 250Ml, Self-Collapsible Bag 119 Albumin 5% 500Ml, Bottle 120 Albumin 5% 500Ml, Self-Collapsible Bag 121 Albumin 5% 50Ml 122 Albumin 5% 50Ml, Self-Collapsible Bag 123 Albumin 5% Low Salt 100 Ml, Bottle 124 Albumin 5% Low Salt 100 Ml, Self-Collapsible Bag 125 Albumin 5% Low Salt 250Ml, Bottle 126 Albumin 5% Low Salt 250Ml, Self-Collapsible Bag 127 Albumin 5% Low Salt 500Ml, Bottle 128 Albumin 5% Low Salt 500Ml, Self-Collapsible Bag 129 Albumin 5% Low Salt 50Ml, Bottle 130 Albumin 5% Low Salt 50Ml, Self-Collapsible Bag 131 Albumin Strip For Protein Test 132 Alectinib Capsules 150 Mg 133 Alemtuzumab 134 Alendronate Na + Cholce Calciferol 70 / 5600 135 Alendronate Sodium 10Mg 136 Alendronate Sodium 35 Mg 137 Alendronate Sodium 5 Mg 138 Alendronate Sodium 70 Mg 139 Alendronate Sodium Cholcalciferol 70 / 5600 140 Alfacalcidol 0.5Mcg 141 Alfuzocin Hcl 10Mg ( Er ) 142 Alfuzocin+Dutasteride 143 Aliskiren 150Mg 144 Aliskiren 300Mg 145 Aliskiren+Amlodipine 146 Aliskiren+Hydrochlorthiazide 147 All Transretonic Acid 10Mg 148 Allopurinol 100Mg 149 Allopurinol 300Mg 150 Alltransretinoic Acid 151 Allumina+Magnesia+Simethicon 170Ml 152 Alluminium Hydroxide+Simethicon+Magnicium Sulphate+Magnicium Sulphate+Magnisium Aluminium Silicate 153 Allylestrenol 5Mg 154 Aloevira + Vitamin E +Glycerin 155 Alpha Calcidol + Calcium Carbonate 156 Alpha Calcidol 0.1 Mcg 157 Alpha Calcidol 0.25 Mcg 158 Alpha Co Opta Activated Factor Vii A 159 Alpha Galactosidase 160 Alpha Ketoanalogue 161 Alpha Ketoanalogue 162 Alpha Lipoic Acid 100 Mg 163 Alprazolam 0.25 Mg 164 Alprazolam 0.50 Mg 165 Alprazolam Propranolol 166 Alprazolam With Melatonin 167 Alprazolam+Isopropanol 168 Alprostadil 500 Microgram 169 Alteplase 20 Mg 170 Alteplase 50 Mg 171 Altramine 50Mg 172 Alumunium Hydroxide Tab 173 Alumunium Hydroxide Gel + Lignocane 174 Amantadine 100 Mg 175 Amastrazole 1Mg 176 Ambroxel +Salbutamol Cough Syrup 177 Ambroxel Cough 178 Ambroxel Cough Syrup Plain 179 Ambroxol 180 Ambroxol + Terbutaline 100Ml 181 Ambroxol Inhalation 182 Ambroxol+Guaphenesin+Terbutalin 183 Amifostine 500Mg 184 Amikacin 100 Mg 185 Amikacin 1Gm ( Barium Free ) 186 Amikacin 250 Mg 187 Amikacin 500 Mg 188 Amiloride & Hcl Hydrochlorothiazide 189 Amino Acid 190 Amino Acid + Dextrose ( Product Should Be Sorbitol Free, All Types, Concentrations And Volumes Should Be Quoted ) 191 Amino Acid +Dextrose +Lipid ( Product Should Be Sorbitol Free, All Types, Concentrations And Volumes Should Be Quoted ) 192 Amino Acid 10% 50 Ml 193 Amino Acid 10% With Eloectrolytes, 500 Ml 194 Amino Acid 10% Without Eloectrolytes, 250 Ml 195 Amino Acid Alone ( All Types, Concentrations And Volumes Should Be Quoted ) 196 Amino Acid And Vitamin 197 Amino Acid Vitamin Minerals Lycopene 198 Amino Acid, Vitamins Minerals With Natural Antioxidants 199 Amino Acid+Protein 200 Amino Acid+Vitamin B Complex 201 Amino Acids 10% 100 Ml 202 Amino Acids 250Ml 203 Amino Salicylic Acid 400 Mg 204 Aminoglycosides 205 Aminophylline 10Ml 206 Aminophylline 250Mg 207 Aminophylline 250Mg / 2Ml 208 Aminoplasma 100Ml For Infants 209 Amiodarone 100Mg 210 Amiodarone 200Mg 211 Amiodarone 50Mg / Ml, 3Ml 212 Amisulpride 100Mg 213 Amisulpride 200Mg 214 Amisulpride 50Mg / 25 Mg 215 Amitriptyline 50 Mg 216 Amitryptiline 10Mg 217 Amitryptiline 25 Mg 218 Amitryptiline Hcl+ Chlordizapoxide 219 Amitryptyline+Gabapentin 220 Amlexanox 221 Amlodipin + Losartan Pottasium 222 Amlodipin + Metoprolol ( 5+50 ) 223 Amlodipine + Indapamide 224 Amlodipine 10Mg 225 Amlodipine 2.5Mg 226 Amlodipine 2.5Mg + Atenolol 25Mg 227 Amlodipine 2.5Mg + Ramipril 2.5Mg 228 Amlodipine 2.5Mg+Metoprolol 25Mg 229 Amlodipine 5Mg 230 Amlodipine 5Mg + Atenolol 50Mg 231 Amlodipine 5Mg + Olmisartan 20Mg 232 Amlodipine 5Mg + Olmisartan 40Mg 233 Amlodipine 5Mg + Perindopril 4Mg 234 Amlodipine 5Mg + Telmisartan 20Mg 235 Amlodipine 5Mg + Telmisartan 40Mg 236 Amlodipine 5Mg+ Ramipril 5Mg 237 Amlodipine 5Mg+Chlorthiazide 12.5Mg 238 Amlodipine 5Mg+Losartan 50Mg 239 Amlodipine+Chlorthalidone 240 Amlodipine+Lisnopril 241 Ammonia Soln. 25% 500Ml 242 Ammonium Lactate Lotion 12% 243 Amonium Lactate 12% 244 Amorolfine 5% 245 Amorphoos Hydrogel Colloidal Silver 50Gm 246 Amorphous Silver Alginate Matrix Paste 15Gm 247 Amoxy+Cloxacillin ( 250+250 ) 248 Amoxycillin 125Mg Dt 249 Amoxycillin 500Mg+Cloxacillin 500 Mg 250 Amoxycillin+Clavanic Acid ( 228.5 ) Mg 251 Amoxycilline 250 Mg. 252 Amoxycilline 30Ml 253 Amoxycilline 500Mg 254 Amoxycilline 60Ml 255 Amoxycilline 750Mg + Tinidazole 500Mg +Omeprazole 20Mg, Kit 256 Amphotericin B Crystalline 257 Amphotericin- B Liposomal Gel 258 Amphotericin- B Liposomal Iv 10Mg 259 Amphotericin- B Liposomal Iv 25Mg 260 Amphotericin- B Liposomal Iv 50Mg 261 Amphotericin B With Fat Emulsion 50Mg 262 Amphotericine B 10Mg 263 Amphotericine B 25Mg 264 Amphotericine B 50Mg 265 Amphotericine B Colloidal 10Mg 266 Amphotericine B Colloidal 25Mg 267 Amphotericine B Colloidal 50Mg 268 Amphotericine B Lipid Complex 100Mg 269 Amphotericine B Lipid Complex 10Mg 270 Amphotericine B Lipid Complex 25 Mg 271 Amphotericine B Lipid Complex 50 Mg 272 Ampicillin + Cloxacilline 30Ml 273 Ampicillin + Cloxacilline 60Ml 274 Ampicillin + Sulbactum ( Ampicillin 250Mg+Sulbactum 125Mg ) 275 Ampicillin + Sulbactum 375Mg ( Ampicillin 250Mg+Sulbactum 125Mg ) 276 Ampicillin 250+Cloxacilline 250Mg 277 Ampicillin 250+Cloxacilline 250Mg 278 Ampicillin 250Mg 279 Ampicillin 250Mg 280 Ampicillin 250Mg / 500 281 Ampicillin 250Mg / 500 282 Ampicillin 500Mg 283 Ampicillin 500Mg 284 Ampicillin+Sulbactum 375 Mg ( Ampicillin 250 Mg + Sulbactum 125 Mg ) 285 Anastrazole 1Mg 286 Anesthetic Antacid 120 Ml 287 Anidulafungin 288 Ant + Mv + Multivitamin + Mineral + Methylcobalamine+ Carbohydrate+Protein+Sugar / Fat, Vitamin C, B, B2+Vit E + Folic Acid 289 Ant + Mv + Multivitamin + Mineral + Methylcobalamine+ Carbohydrate+Protein+Sugar / Fat, Vitamin C, B, B2+Vit E + Folic Acid 200 Ml 290 Antacid 170 Ml ( All Flavour ) 291 Anti D 250 Mcg 292 Anti D 300 Mcg ( Monoclonel ) 293 Anti D 300 Mcg ( Polyclonel ) 294 Anti D 50 Mcg ( Mono ) 295 Anti D 50 Mcg ( Poly ) 296 Anti Hairfall Serum 60 Ml 297 Anti Human Lymphocyte Immunoglobulin ( Horse ) 100 Mg 298 Anti Human Lymphocyte Serum 5Ml 299 Anti Human Thymocyte Immunoglobulin 300 Anti Rabbies Immunoglobin 301 Anti Rabbies Vaccine 302 Anti Rhd 1000Mcg 303 Anti Rhd 300 Mcg ( Monoclonel ) 304 Anti Rhd 300 Mcg ( Polyclonel ) 305 Anti Rho D Immunoglobulin 1000Mcg / 5000 Iu 306 Anti Snake Venum Polyvalent 307 Antihemorridol+Steriode 308 Anti-Human T-Lymphocyte Immunoglobulin From Rabbits 100 Mg / 5 Ml 309 Antioxidant Plain 310 Antioxidant + Multivitamin 311 Antioxident + Multivitamin + Minerals 312 Antiseptic / Antibiotic Ointment / Cream For Bed Sore / Wound Care ( All Types, Chemical Composition, Concentrations And Pack Volumes To Be Quoted ) 313 Antiseptic Tulle Grass Dressing 10X10cm ( Large ) 314 Antiseptic Tulle Grass Dressing 10X10cm ( Small ) 315 Apixaban 2.5Mg 316 Apixaban 5Mg 317 Apixaben 2.5 Mg 318 Apixaben 5 Mg 319 Apomorphine 2Mg 320 Apomorphine 4Mg 321 Apremilast 10 Mg 322 Apremilast 30 Mg 323 Aprepitant 125Mg 324 Aprepitant 80Mg 325 Aprotinine 10000Kiu / Ml 50Ml 326 Arbutin + Kojic A + Glycolic Acid 327 Arbutin + Kojic A + Glycolic Acid 328 Argatroban 250Mg / 2.5Ml 329 Arginine 10% 330 Arginine Sachets 331 Aripiprazole 10Mg 332 Aripiprazole 15Mg 333 Aripiprazole 20Mg 334 Aripiprazole 5Mg 335 Arsenic Trioxide 10 Mg 336 Artemether 337 Artemether 338 Artemether + Lumifantine 339 Artesunate+Amodiaquine 340 Artesunate+Mefloquine 341 Artether 342 Artificial Saliva 343 Artificial Saliva 344 Artificial Saliva 345 Artisunate 346 Artisunate 50 Mg 347 Artisunate Ds Kit 348 Ascorbic Acid 60Mg Biotin 300 Mcg Folic Acid 10 Mg Methylcobalamin 1500 Mcg Niacinamide 20 Mg Pantothenic Acid 10 Mg Pyridoxine Hydrochloride 20 Mg Riboflavine 3 Mg Thiamine Hydrochloride 2 Mg 349 Aspart / Degludec 30 / 70 Flextouch And Penfill 350 Aspart 3Mg / 300 Ml 351 Aspirin Delayed Release 352 Aspirin+Clopedogerol+Atorvastatin ( 75+75+10 ) 353 Aspirin+Clopidogrel+Rosavastatin ( 75+75+10 ) Mg 354 Aspirin+Dipyridamole 355 Asprin + Glycine 356 Asprin Delayed Release Ds 357 Atazanavir Sulphate 300Mg & Ritonavir 100 Mg 358 Atenolol + Chlorthiazide ( 25+12.5 ) Mg 359 Atenolol + Chlorthiazide ( 50+12.5 ) Mg 360 Atenolol + Hydrochlorthiazide ( 100+12.5 ) Mg 361 Atenolol + Indipamide 362 Atenolol +Nefedipine 363 Atenolol 100Mg 364 Atenolol 12.5Mg 365 Atenolol 25Mg 366 Atenolol 50Mg 367 Atenolol Chlorthalidone 368 Atezolizumab 1200 Mg / 20Ml 369 Atg 100Mg 370 Atg 25 Mg 371 Atg 250Mg 372 Atorva+Ezitinib 373 Atorvastatin + Atenolol + Losartan Potassium 374 Atorvastatin + Ramipril 375 Atorvastatin + Ramipril 376 Atorvastatin + Ramipril + Aspirin ( 10+2.5+75 ) 377 Atorvastatin + Ramipril + Aspirin ( 20+5+75 ) 378 Atorvastatin 10 Mg + Clopidogrel 75 Mg + Aspirin Ip 75 Mg 379 Atorvastatin 10Mg+ Finofibrate 160Mg 380 Atorvastatin 40Mg 381 Atorvastatin 5 Mg 382 Atorvastatin 80Mg 383 Atorvastatin Calcium 10Mg 384 Atorvastatin Calcium 20Mg 385 Atorvastatin Tg 386 Atorvastatin+Ramipril+Asprin+Clopedogrole ( 10+2.5+75+75 ) Mg 387 Atorvastatin+Ramipril+Asprin+Clopedogrole ( 20+5+75+75 ) Mg 388 Atracurium Bromide 25Mg 389 Atropine 390 Atropine 391 Avobenzone+Oxybenzone+Vitamins 392 Azacitidine 393 Azathioprime 25Mg 394 Azathioprime 50Mg 395 Azelac Acid 10% 15 Gm 396 Azelac Acid 10% 15 Gm 397 Azelastine 398 Azelastine Hcl 399 Azelastine Hcl & Fluticasone Propio 400 Azelastine-Budesonide 401 Azithromycin 100 Mg / Dt 402 Azithromycin 15Ml 403 Azithromycin 250+Cefixime 200Mg 404 Azithromycin 250Mg 405 Azithromycin 500Mg 406 Azithromycin 500Mg 407 Aztreonam 1 Gm 408 Aztreonam 2 Gm 409 Aztreonam 500 Mg 410 B1+B6+B12+Fa+Ino+Ala+Nicotinamide+Biotine 411 B12+Folate 412 B12-Cyanocobalamine+Multivitamin 413 B6+Fa+B12 414 Bacillous Clausi Spores ( Enterogermina ) 415 Bacillus Clausii Spores Suspension 5Ml ( Lactic Acid ) 416 Baclofen 417 Baclofen 10Mg 418 Baclofen 1Mg / Ml 419 Baclofen 20Mg 420 Baclofen 25Mg 421 Baclofen 5Mg 422 Baclofen Extended Rele. 20 Mg 423 Baclofen Extended Rele. 40 Mg 424 Bactigrass 425 Balanced Gelatin 4% 500 Ml 426 Balanced Salt Solution Plus ( Bss ) 250 Ml 427 Balanced Salt Solution Plus ( Bss ) 500 Ml 428 Balanced Solution With Calcium Acetate & Maleate 500 Ml 429 Bambuterol Hcl 10 Mg 430 Barium Sulphate H.D. 150 Ml. 431 Barium Sulphate-Microbar Hd 300Ml 432 Basiliximab 20Mg 433 Bcg Vaccine 40 Mg 434 B-Complex + Vitamin C ( 100Ml / 200 Ml ) 435 B-Complex Methylcobalamin 436 Beclomethasone Dipropionate&Neomycin Sulphate 15Gm 437 Beclomethasone Dipropionate.025%, Phenylepherine Hydrochloride .1%, Lignocaine Hydrochloride 2.5% 438 Bectomethasone + Salbutamol 439 Belatacep 440 Benazepril 10Mg 441 Benazepril 20Mg 442 Benazepril 5Mg 443 Bendamustine 100Mg 444 Benfothiamine Methylcobalamin Alpha 445 Benfotiamine 100 Mg 446 Benzocain Gel 447 Benzthiazide+Triameterene ( 25+50Mg ) 448 Benzyl Benzoate 25% 449 Benzyl Benzoate 25% 100Ml 450 Benzyl Penicilline 10 Lac Iu 451 Benzyl Penicilline 12 Lac Iu 452 Benzyl Penicilline 24 Lac Iu 453 Benzyl Peroxide 2.5% Gel 454 Benzyl Peroxide 5% Gel 455 Beta Carotone + C + E 456 Beta White + Tyrostat + Melanostatine-5, 10 Gm 457 Betacarotene Lutein 458 Betahistin Dihydrochloride16mg 459 Betahistine Dihydrochloride 24Mg 460 Betahistine Dihydrochloride 48Mg 461 Betahistine Dihydrochloride 8Mg 462 Betahistine Mesilate 12 Mg 463 Betahistine Mesilate 6 Mg 464 Betamethasome Dipropionate +Clotrimazole 465 Betamethasome Dipropionate +Emollient 466 Betamethasome Dipropionate +Gentamicin 467 Betamethasome Dipropionate +Salicylic Acid 468 Betamethasome Dipropionate +Urea+Lactic Acid+Salicylic Acid 469 Betamethasone + Clioquinol 30 Gm 470 Betamethasone + Neomycin 471 Betamethasone 0.5 Mg 472 Betamethasone 1 Ml 473 Betamethasone 12% W / W 20Gm 474 Betamethasone 2 Ml 475 Betamethasone 4Mg / Ml 2Ml ( Amp ) 476 Betamethasone 4Mg / Ml 2Ml Vial 477 Betamethasone+Cicloquine 478 Betamethasone+Clotrimazole 479 Betamethson Dipropionate+Miconazole Nitrate 480 Betamethson Dipropionate+Neomycin Sulphate+Tolanflate 481 Betamethson Dipropionate+Salicyclic Acid 482 Betaxalol .5% 483 Betaxolol 484 Bethamethasone Valerate + Gentamycin + Miconazole 485 Bethamethasone Valerate + Neomycin 20 Gm 486 Bethamethasone+ Valerate + Phenylepheni Hc 487 Bethanechol Cloride. 25Mg 488 Bethanechol Cloride. 25Mg 489 Bethanechol Cloride. 50Mg 490 Bevacizumab 400 Mg 491 Bevacizumob 4Ml 492 Bezafibrate 200Mg 493 Bezafibrate 400Mg 494 Bezocaine+Para Chlorobenzene 495 Bezonatate 496 Bibag For Online Filteration ( Dry Sodium Bicarbonate ) 650 497 Bibag For Online Filteration ( Dry Sodium Bicarbonate ) 900 498 Bicalutamide 50 Mg 499 Biclutamide 50Mg 500 Bioactive Collagen Peptides 501 Biotin 502 Biotin + Vitamin 503 Biotin 10 Mg + Vitamin And Minerals 504 Biotin 5 Mg + Folic Acid Ip 5 Mg 505 Biotin 5 Mg + Vitamin And Minerals 506 Bisacodyl 10 Mg 507 Bisacodyl 5Mg 508 Bisacodyl Suppositories ( Adult ) 509 Bisacodyl Suppositories ( Paed. ) 510 Bis-Chloroethylnitrosourea 100Mg 511 Bisoprolol Fumarate 2.5Mg 512 Bisoprolol Fumarate 5Mg 513 Bisoprolol+Hydrochlorthiazide 514 Bivaluridin 515 Bleomycin Sulphate 15Mg 516 Bortezomib 1Mg. 517 Bortezomib 2.5 Mg 518 Bortezomib 2Mg. 519 Bortezomib 3.5 Mg 520 Bortezomib 3.5Mg. 521 Bosentan 125Mg 522 Bosentan 62.5Mg 523 Botulinum Toxin 524 Botulinum Toxin 100 Iu 525 Branch Chain Amino Acid Sachet 10Gm 526 Brimonidine 527 Brimonidine Tartrate & Timolol Maleate Opt 528 Brimonidine Tartrate + Opthalmic Sol. 529 Brimonidine Tartrate 2Mg 530 Brimonidine Tartrate P 0.15% 531 Brinzolemide 1% 532 Bromelain+Rutoside+Trypsin 533 Bromexime+Levosalbutamol 534 Bromhex. +Dextrometh. +Amm.Cl. +Menth 535 Bromhexine 536 Bromhexine 100Ml 537 Bromocriptine Mesylate 2.5Mg 538 Bromofenac 539 Buclizine Hydrochloride Ip 25 Mg 540 Buclizine Hydrochloride Ip 50 Mg 541 Buclizine Hydrochloride Ip 6 Mg / 5Ml 542 Budesonide 543 Budesonide 2Ml 544 Budesonide 3Mg 545 Budesonide Inhaler 200 Mcg 546 Budesonide Nasal Spray 547 Budesonide Respirator 548 Budisonide 100 Inhaler 549 Bumustine 40 Mg 550 Bupinorphine Transdermal Patch 10Mcg 551 Bupinorphine Transdermal Patch 20Mcg 552 Bupinorphine Transdermal Patch 5Mcg 553 Bupivacaine 0.25% 20Ml 554 Bupivacaine 0.50% 20Ml 555 Bupivacaine H 0.5% 4Ml 556 Bupivacine Isobaric 0.5% 4Ml 557 Busprion 5 Mg 558 Busulfan 2Mg 559 Busulfan 60Mg / 10Ml 560 Butorphanol Tartrate 1Mg 561 Butorphanol Tartrate 2Mg 562 Butorphenol Inj. 563 Butorphenol Nasal Spray 564 Cabazitaxel 60 Mg 565 Cabazitaxel 60 Mg 566 Cabergoline 0.25Mg 567 Cabergoline 0.5Mg 568 Cabergoline 1 Mg 569 Cabonyl Iron Folic Ac. Cal. Bio. Methyco.Vi 570 Caffeine Citrate 60Mg / 1Ml 571 Caffeine Citrate 60Mg / 2Ml 572 Caffeine Citrate 60Mg / 3Ml 573 Caffeine Citrate 60Mg / 3Ml 574 Calamine Lotion 575 Calcipotriol Cream 576 Calcitonin 577 Calcitonin 100 Mg 578 Calcitrid+Calcium Carbonate+Mehycabol+Vit. Ki-7+Zinc 579 Calcitriol 0.25Mcg 580 Calcitrol + Calcium Carbonate + Zinc 581 Calcitrol 1Mcg 582 Calcitrol Oint 3 Mcg 583 Calcium & Vitamin D3 584 Calcium & Vitamin D3, B12 585 Calcium + Isoflavane 586 Calcium + Methylcoblamine + Folic Acid + B6 587 Calcium + Vit B Comp+ Vit C+D3 588 Calcium + Vit B Comp+ Vit C+D3 589 Calcium + Vitamin D3 & Vitamin B12 590 Calcium Acetate 667 Mg 591 Calcium And Phosphorus With Vitamin D3 592 Calcium And Phosphorus With Vitamin D3 , 200Ml 593 Calcium Carb. +Mang. +Vit D3+Zinc 594 Calcium Carb. +Mang. +Vit D3+Zinc 595 Calcium Carbonate 150Mg 596 Calcium Carbonate 300Mg 597 Calcium Carbonate 500Mg 598 Calcium Carbonate Calcitriol Vitamin K 2 599 Calcium Carbonate Calcium Vitamin K2-7, Magnesium 600 Calcium Carbonate With Vit - D3 , 250Mg 601 Calcium Carbonate With Vit - D3, 500Mg 602 Calcium Carbonate With Vitamin D3, B6 603 Calcium Carbonate+Vit D3 1000 Mg 604 Calcium Chloride 10Ml 605 Calcium Citrate + Calcitriol + Vit. K 606 Calcium Citrate +Methycobalamine+Calcitriol 607 Calcium Citrate 1000Mg +Vit.D-3 608 Calcium Citrate Maleate +Vit.D-3 609 Calcium Citrate Vit D3 & Folic Acid 610 Calcium Citrate+Methycobalamine+Calcitriol 611 Calcium D3 60000 612 Calcium D3 60000 613 Calcium Dobesilate + Docusate Sodium 614 Calcium Dobesilate + Lignocaine + Hydrocortizone + Zinc 615 Calcium Dobesilate 500Mg 616 Calcium Folivate 15 Mg 617 Calcium Folivate 30 Mg 618 Calcium Gluconate ( 50 Mg ) + Calcium Lactobionate ( 87.5 Mg ) 619 Calcium Gluconate 10% 620 Calcium Phosphate+Chromic Cl2+Biotin+Fe+Compound Vitamin Abcde 621 Calcium Pidolate 622 Calcium Polysterine Sulphonate 623 Calcium Vitamin D3 Zinc 624 Calcium Vitamin D3, B12 625 Calcium Vitamin D3, B6 Lysine Mineral 626 Calcium With Vit - D3 627 Calcium With Vitamin D&B 12 628 Calcium With Vitamin D&B 12 629 Calcium+Isoflavon 630 Camphor+Chlorothymol+Eucalyptol+Methol+Terpineol 631 Canagliflozin 100 Mg 632 Canagliflozin 300 Mg 633 Capecitabine 500 Mg 634 Caphasol 635 Capreomycin 1000 Mg 636 Capreomycin Sulphate 637 Capreomycin Sulphate 750 Mg 638 Capsaiein+Methyl Salieylate+Menthol+Diclofenac 639 Capsule 13 Cis Retinoic Acid 10Mg 640 Capsule 13 Cis Retinoic Acid 20Mg 641 Captopril 12.5 Mg 642 Captopril 25Mg 643 Captopril 50Mg 644 Carbamazepine 200Mg 645 Carbamazepine Retard 200 Mg 646 Carbamazepine Retard 300 Mg 647 Carbamazepine Retard 400 Mg 648 Carbamezapine 100 Mg / 5Ml 649 Carbamezapine 100Mg 650 Carbamezapine 200Mg 651 Carbamezapine 300Mg 652 Carbamezapine 400Mg 653 Carbamezapine Retard 200Mg 654 Carbimazole 10Mg 655 Carbimazole 20Mg 656 Carbimazole 5Mg 657 Carbocisteine 375Mg 658 Carbohydrate ( 48Gm ) +Protein ( 30Gm ) +Sugar ( 1.06Mg ) ( 275 Gm Pack ) 659 Carbolic Acid 400Ml / 500Ml 660 Carbonyl Iron & Folic Acid Vitamin B12 661 Carbonyl Iron + Folic Acid 5 Mg 662 Carbonyl Iron + Zinc + Folic Acid 663 Carboplatin 150 Mg 664 Carboplatin 450Mg 665 Carboplatin 600Mg 666 Carboxy Methyl Cellulose 0.5% 667 Carboxy Methyl Cellulose+Glycerine 0.1% 668 Carboxy Methyl Cellulose+Glycerine 1% 669 Carboxylic Acid 60 Gm 670 Carboxymethyl Cellulose + Glycerin 671 Carboxymethyl Cellulose + Glycerin - Soft Drops 672 Cardio Plegia Conc. 20Ml 673 Carfilzomib 60 Mg 674 Carfilzomib 60 Mg 675 Caritron 8Mg 676 Carmellose Sodium 677 Carmustine 100 Mg 678 Carnitine 330 Mg 679 Carnitine 330Mg 680 Carotenoids + Lutein + Zeaxanthi 681 Carvedilol 682 Carvedilol + Hydrochlorthiazide 12.5 Mg 683 Carvedilol + Hydrochlorthiazide 6.25 Mg 684 Carvedilol 12.5 Mg 685 Carvedilol 3.125 Mg 686 Carvedilol 6.25 Mg 687 Caspofungin Acetate 50Mg 688 Caspofungin Acetate 70 Mg 689 Castramid 50 Mg 690 Catheter Lock Solution 32.4% 691 Catheter Lock Solution 46.7% 692 Cefaclor 250Mg 693 Cefaclor 30 Ml 694 Cefaclor 500Mg 695 Cefaclor 750 Mg 696 Cefadroxil 1Gm 697 Cefadroxil 1Gm 698 Cefadroxil 250Mg 699 Cefadroxil 30Ml 700 Cefadroxil 500Mg 701 Cefazolin 1Gm 702 Cefazoline 500Mg 703 Cefdinir 300 704 Cefditioren 200Mg 705 Cefepime 1 Gm 706 Cefepime 2 Gm 707 Cefepime 2 Gm + Tazobactam 250 Gm 708 Cefipime 1Gm+Tazobactum 125 Mg 709 Cefipime 250Mg+Tazobactum 31.25 Mg 710 Cefipime 500Mg+Tazobactum 62.5 Mg 711 Cefixim+Ornidazole 712 Cefixime 100Mg 713 Cefixime 100Mg / 5Ml ( 30 Ml ) 714 Cefixime 200Mg 715 Cefixime 200Mg + Ofloxacin 200Mg 716 Cefixime 500 Mg Dt 717 Cefixime+Azithromycin 718 Cefoparazone + Sulabactum ( 2Gm + 1Gm ) 719 Cefoparazone 2 Gm 720 Cefoperazone 1 Gm 721 Cefoperazone 250 Mg 722 Cefoperazone Sodium +Sulbactum ( 1.5Gm+1.5Gm ) 723 Cefoperazone Sodium +Sulbactum ( 500Mg+500Mg ) 724 Cefotaxim + Sulbactum 1.5 Gm 725 Cefotaxim + Sulbactum 375 Mg 726 Cefotaxim + Sulbactum 750 Mg 727 Cefotaxim 250Mg 728 Cefotaxime 125Mg 729 Cefotaxime 1Gm 730 Cefpirome Sulphate 1 Gm 731 Cefpodoxime + Clavulanic Acid ( 100+150 ) 732 Cefpodoxime + Clavulanic Acid ( 200+228 ) 733 Cefpodoxime 100 Mg + Clavulanic Acid 62.5 Mg 734 Cefpodoxime 100+Clavulanic Acid 100 735 Cefpodoxime 100Mg 736 Cefpodoxime 200 Mg + Ofloxacin Ip 200 Mg 737 Cefpodoxime 200+Clavulanic Acid 125Mg 738 Cefpodoxime 50 Mg + Clavulanic Acid 31.25 Mg / 5Ml 739 Cefpodoxime 50+Clavulanic Acid 50 740 Cefpodoxime 50+Clavulanic Acid 50 741 Cefpodoxime Proxetil 200Mg 742 Cefpodoxine Proxetil 100Mg / 5Ml 743 Ceftazidime 1Gm 744 Ceftazidime 2 Gm 745 Ceftazidime 250Mg 746 Ceftizoxime Sodium 1 Gm 747 Ceftolozane 1 Gm + Tazobactum 0.5 Gm 748 Ceftozolant + Tazobactum 749 Ceftriaxone 1Gm 750 Ceftriaxone 1Gm + Tazobactum 125 Mg 751 Ceftriaxone 2 Gm 752 Ceftriaxone 250Mg 753 Ceftriaxone 500Mg + Tazobactum 62.5 Mg 754 Ceftriaxone / Disodium Editate / Sulbactum 755 Ceftriaxone / Disodium Editate / Sulbactum 756 Cefuroxim 500Mg + Linezolid 600Mg 757 Cefuroxime 250 Mg 758 Cefuroxime Axetil 500 + Clavulinic Acid 759 Cefuroxime Axetil 500Mg 760 Cefuroxime Sod. 1.5Gm 761 Cefuroxime Sod. 750Mg 762 Cefuroxime Sodium 250 Mg 763 Celecoxib 200Mg 764 Cellumide Eye Strip 765 Cephalexin 250Mg 766 Cephalexin 500Mg. 767 Cephalexin 60 Ml 768 Cephalexine 30Ml. 769 Ceritinib 150Mg 770 Cetrizine 771 Cetrizine + Dexamethasone 772 Cetrizine + Phencitate 773 Cetrizine Hcl 10 Mg Tab 774 Cetrorelix Acetate 775 Cetrorelix Axetate Equivalent To Cetrorelix 0.25 Mg 776 Cetuximab 100Mg 777 Cetuximab 500Mg 778 Chicken Pox Vaccine 779 Chlomphenol+Polymexin B+Bacitracin 780 Chlophineramine+Phenylpherene+Paracetamol+Caffiene 781 Chloral Hydrate 100Mg / Ml 782 Chloram+Sodium Phosphate 783 Chlorambucil 5 Mg 784 Chloramphanicol 500Mg 785 Chloramphenical+Polymixin Sulp 786 Chloramphenicod + Bectomethason + Clotrimazole 787 Chloramphenicol 788 Chloramphenicol 100Ml 789 Chloramphenicol 1Gm 790 Chloramphenicol 500 Mg 791 Chloramphenicol 60 Ml 792 Chlordiazepoxide Amitriptyline Hcl 793 Chlordiazepoxide+Clidinime+Dicyclomin 794 Chlordiazepoxide+Clindium Bromide 795 Chlordizepoxide 10Mg 796 Chlordizepoxide 25Mg 797 Chlorhexidine Gluconate 798 Chlorhexidine Gluconate 799 Chlorhexidine Gluconate 100Ml 800 Chlorhexidine Gluconate 160 Ml 801 Chlorhexidine Gluconate 500 Ml 802 Chlorhexidine Gluconate 500Ml 803 Chlorine Tabs 804 Chlorine Water 500Ml 805 Chloroprocaine Hcl 5Ml 806 Chloroquine 807 Chloroquine ( 200Mg / 5Ml ) 808 Chloroquine Phosphate 250Mg 809 Chlorpheniramine 810 Chlorpheniramine Maleate 811 Chlorpheniramine Maleate 812 Chlorpheniramine Maleate 100 Ml 813 Chlorphenramine 814 Chlorpromazine 50Mg 815 Chlorpromazine 50Mg / Ml 2Ml 816 Chlorthalidine + Telmisartan 817 Chlorthalidine 12.25 818 Chlorthalidine 25Mg 819 Chlorthalidine 6.25 820 Chlorthalidone 821 Chlorzoxazone 500Mg 822 Chlorzoxazone+Diclofenac Sod. 500 Mg + Paracetamol 823 Cholcecalciferol 60000, Vitamin D3 824 Cholecalciferol 400 Iu ( 10 Mcg ) ( Vitamin D3 ) / 1Ml 825 Cholecalciferol 2, 000 I.U. 826 Cholecalciferol Oral Sol 30 Ml ( 60K ) 827 Cholecalciferol Vit D3 828 Cholecaliferol 60 Lac 829 Cholestyramine 4 / 5 Gm 830 Choline Salicylate Lignocaine 831 Choramphenicol Dipropionate Ciotri 832 Chromylyn Sodium 833 Ciclesonide -80Ug 834 Ciclesonide Formeterol ( 4.5 / 160Ug ) 835 Ciclesonide Formeterol ( 4.5 / 160Ug ) 836 Ciclesonide-160Ug 837 Ciclesonide-160Ug 838 Ciclopirox Lacquer ( Nail ) 839 Ciclopirox Topical 8% Soln. 840 Cilindepine 10Mg 841 Cilindepine 10Mg + Telmisartan 40 Mg 842 Cilnidipine 10 Mg + Telmisartan Ip 40 Mg 843 Cilnidipine 10Mg+Atenolol 50Mg 844 Cilnidipine 20 Mg 845 Cilnidipine 20Mg 846 Cilnidipine 5Mg 847 Cilostazol Tab 100 Mg 848 Cilostazol Tab 50 Mg 849 Cimetidine 200 Mg 850 Cimetidine 400 Mg 851 Cimetropium Bromide 852 Cinacalcet 30 Mg 853 Cinacalcet 60 Mg 854 Cinerazine + Betahisterine 855 Cinidipine 20 Mg 856 Cinnarizine 20Mg + Dimenhydrinate 40 Mg 857 Cinnarizine 25Mg 858 Cinnarizine 75Mg 859 Ciprofloxacin + Dexamethasone 860 Ciprofloxacin + Ornidazole 861 Ciprofloxacin 100Mg 862 Ciprofloxacin 200Mg 100Ml Iv 863 Ciprofloxacin 250Mg 864 Ciprofloxacin 250Mg+Tinidazole 300Mg 865 Ciprofloxacin 500 + Tinidazole 600 866 Ciprofloxacin 500 Mg 867 Ciprofloxacin 750 Mg 868 Cisapride 10 Mg 869 Cisapride 60Ml 870 Cisatracurium Besylate 2Mg / Ml ( 10Ml ) 871 Cisatracurium Besylate 2Mg / Ml ( 5Ml ) 872 Cisplatin 10 Mg 873 Cisplatin 100 Mg 874 Cisplatin 50 Mg 875 Citalopram Hydrobromide 10 Mg 876 Citicholine 877 Citicholine 500 Mg 878 Citicoline 879 Citicoline 1 Ml 880 Citicoline 2Ml 881 Citicoline 500 Mg 882 Citicoline 500Mg & Piracetam 400Mg Tablets 883 Citicoline 500Mg & Piracetam 800Mg Tablets 884 Cladirabin 10 Mg 885 Clarithromycin 886 Clarithromycin 250Mg 887 Clarithromycin 500Mg 888 Clav Acid + Amoxy ( 125+250 ) Mg 889 Clav Acid + Amoxy ( 25+125Mg ) 890 Clav Acid + Amoxy ( 25+125Mg ) 891 Clav Acid + Amoxy ( 31.25+125 ) 30Ml 892 Clav Acid + Amoxy ( 50+250 ) Mg 893 Clav.Acid + Amoxy ( 200Mg+ 1Gm ) 894 Clav.Acid 125 + Amoxycilline 875 Mg 895 Clav.Acid 125 + Amoxycilline 875Mg 896 Clav.Acid+ Amoxy ( 125 +500 ) 897 Clav.Acid+ Cefixime ( 125 +200 ) 898 Clav.Acid+ Cefixime ( 31.25+50 ) ) 899 Clav.Acid+ Cefixime ( 62.5 +100 ) 900 Clepopride 0.5 Mg 901 Clepopride 1 Mg 902 Clindamycin + Nicotinamide 15 Gm 903 Clindamycin 100Mg + Clotrimazole 100Mg + Tinidazole 904 Clindamycin 100Mg + Clotrimazole 100Mg + Tinidazole 100Mg Vaginal Suppositories 905 Clindamycin 100Mg+Clotrimazole 100Mg 906 Clindamycin 150 Mg 907 Clindamycin 300 Mg 908 Clindamycin 300Mg 909 Clindamycin 600Mg 910 Clindamycin 600Mg 911 Clindamycin Gel 912 Clindamycin Phosphate + Benzoyl Peroxide 10 Gm 913 Clindamycin+Allantoin+Nicotinamide 914 Clindamycin+Clotrimazole 915 Clindipine 10 Mg 916 Clindipine 5 Mg 917 Clobazam 10Mg 918 Clobazam 20Mg 919 Clobazam 5Mg 920 Clobazam Mouth Dissolving 921 Clobcare Mx Clobetasol 922 Clobestasol+Miconazole Cream 923 Clobetasol 924 Clobetasol 0.05% + Salicylic Acid 3% 925 Clobetasol 0.05% + Salicylic Acid 3% 926 Clobetasol 0.05% + Salicylic Acid 6%+Lactic Acid 3%+Urea 10% 927 Clobetasol Propionate + Genta. + Micona. Nit 15Gm 928 Clobetasol Propionate + Genta. + Micona. Nit 30 Gm 929 Clobetasol Propionate 30Gm. 930 Clobetasol Propionate Topical Solution 931 Clobetasole Cream 15Gm 932 Clofazimine 933 Clomiphene 25Mg 934 Clomiphene 50Mg 935 Clonazepam 0.25Mg 936 Clonazepam 0.5Mg 937 Clonazepam 1Mg 938 Clonazepam 2Mg 939 Clonazepam 3Mg 940 Clonazepam Dispersible 941 Clonazepam Ip 0.50 Mg + Propranolol Hydrochloride Ip 20 Mg 942 Clonidine 100 Mcg 943 Clonidine 100 Mcg + Hydrochlorthiazide 12.5Mg 944 Clonidine 100 Mcg + Hydrochlorthiazide 20Mg 945 Clonidine 150 Mcg 946 Clonidine 150 Mcg 947 Clonidine 1Ml 948 Clonidine Hydrochloride 949 Clonidine Hydrochloride 150 Mcg 950 Clonidine Hydrochloride I.V. / I.M 951 Clopidogrel 150 Mg 952 Clopidogrel 300 Mg 953 Clopidogrel 75 + Aspirin 150 954 Clopidogrel 75 Mg 955 Clopidogrel 75Mg + Aspirin 75Mg 956 Clopitrogril + Atorvastatin 957 Clorpolydone + Metoprolol 958 Clostridium Botulinum 250 Unit / Ml 959 Clostridium Botulinum 500 Unit / Ml 960 Clotrimazole Mouth Paint For Oral Application 961 Clotrimazole +Beclomethasone Dipropionate+Gentamycin Sulphate 962 Clotrimazole 1% + Selinium Sulphate 2.5% 963 Clotrimazole 1% Beclomethasone 964 Clotrimazole 1% Topical Solution 965 Clotrimazole 200 Mg 966 Clotrimazole Ear Drop 967 Clotrimazole Lotion For Scalp Apllication 968 Clotrimazole Lozenges 10Mg 969 Clotrimazole Mouth Paint For Oral Application 970 Clotrimazole Oint 15 Gm 971 Clotrimazole Powder 972 Clotrimazole Sol. ( Extra ) 973 Clotrimazole Tropical Lotion 15Ml 974 Clotrimazole Vaginal Tab. 975 Clotrimazole+Baclo+Ligno+Chloramphenicol 976 Clotrimazole+Beclomethasone Oint. 977 Cloxacillin 100Ml 978 Cloxacillin 250Mg 979 Cloxacillin 500Mg 980 Cloxacillin 500Mg 981 Cloxacilline 125 Mg 982 Cloxacilline 250 Mg 983 Cloxacilline 500 Mg 984 Co - Trimoxazole ( 100+480 ) Mg 985 Co - Trimoxazole ( 60Ml ) 986 Co - Trimoxazole 20Mg 987 Co - Trimoxazole 5Ml 988 Co - Trimoxazole 5Ml + Trimethoprim 989 Co - Trimoxazole 60Ml + Trimethoprim 990 Co - Trimoxazole Ds ( 160+160 ) 991 Coaltar 50 Gm 992 Coaltar Solution 50 Gm 993 Coartem And Riamet, Falcynate-Lf 20 / 120 994 Coartem And Riamet, Falcynate-Lf 40 / 240 995 Coartem And Riamet, Falcynate-Lf 40 / 480 996 Coartem And Riamet, Falcynate-Lf 80 / 480 997 Cod Liver Oil 300Mg 998 Codeine Linctus 100Ml 999 Codergocrine 1Mg 1000 Codergocrine 1Mg 1001 Codiene Sulphate 1002 Codiene Sulphate 1003 Codiene + Promethazine 60Ml 1004 Codiene Phosphate+Diclofenac 1005 Codiene+Chlorepheniramine Maleate 100 Ml 1006 Coenzyme Lycopene 1007 Coenzyme Q 100 Mg 1008 Coenzyme Q 100 Mg + Levocarnitine 500 Mg 1009 Coenzyme Q 30 Mg 1010 Coenzyme Q 300 Mg 1011 Coenzyme Q10 180Mg 1012 Colchicine 0.5 Mg 1013 Cold Sterilant Concentrate 1014 Colistimethate Sodium 1Miu 1015 Colistimethate Sodium 2Miu 1016 Colistimethate Sodium 3Miu 1017 Colistimethate Sodium 4.5 Miu 1018 Colistimethate Sodium 8 Miu 1019 Colistimethate Sodium With 150Mg Colistin Base 1020 Collagen Based Cream / Gel For Burn Dressing 1021 Collagen Peptides 10G, Glucosamine Sulphate Potassium Chloride 1500Mg , Vitamin C 35 Mg ( 12 Gm ) 1022 Colloidal Iron Lysine Fol 1023 Colloidal Nanosilver Hydrogel 1024 Combination Mmr Vaccine Cotaining Measles, Mumps And Rubella Vaccine , Live 1025 Combination Vaccine Containing Diptheria, Pertussis ( Whole Cell ) , Tetanus Toxoid, Hepatitis B ( Rdna ) , Hemophilus Toxoid, Hepatitis B ( Rdna ) , Hemophilus Influenza Type B Andpolio Virus: Each 0.5Ml Containing: Dipheria Toxoid >_20 Lf To <_30 Lf, Tetanus Toxoid >_5 Lf To <_25 Lf, B.Pertusis Whole Cell Inactivated >_4 Iu, Hbsag Recombinant Dna 10 Microgram And Inactivate Polio Virus Containing Type 1, 2 And 3 1026 Combination Vaccine Injection Containing Tetanus Toxoid 5Lf, Diphtheria Toxoid 2-2.5 Lf, Acellular Pertussis Toxoid 2.5-8 Microgram, Filamentous Hemagglutinin ( Fha ) 5-8 Microgram And Petactin 2.5-3 Microgram 1027 Combination Vaccine-Diptheria-Pertussis-Tetanus ( Dpt ) +Hemophilus Influenzae Type B ( Hib ) , 1028 Combination Vaccine-Diptheria-Pertussis-Tetanus ( Dpt ) +Hemophilus Influenzae Type B ( Hib ) , Hepatitis B ( Hep B ) 1029 Combination Vaccine-Diptheria-Pertussis-Tetanus ( Dpt ) +Hemophilus Influenzae Type B ( Hib ) , Injectable Polio 1030 Combination Vaccine-Diptheria-Pertussis-Tetanus ( Dpt ) +Hepatitis B 1031 Compound Dithranol 30 Gm Oint. 1032 Compound Sodium Chloride 500Ml 1033 Compound Sodium Chloride 500Ml 1034 Conivaptan 15Gm 1035 Conivaptan 15Gm 1036 Conivaptan 20Gm 1037 Conivaptan 20Gm 1038 Conivaptan 30Gm 1039 Conivaptan 30Gm 1040 Conjugated Estrogens 1041 Conjugated Estrogens 0.3Mg 1042 Conjugated Estrogens 0.625Mg 1043 Conjugated Estrogens 1.25Mg 1044 Contrast - Diatrizoate Maglumine Sod Solution 1045 Contrast For Usg – Sonoview Sulfur Hexafluoride 1046 Contrast Iodinated Oral 30Ml 1047 Contrast - Ionic Maglumine Diatrizoate Sod 60%, 20 Ml 1048 Contrast - Ionic Maglumine Diatrizoate Sod 76%, 100 Ml 1049 Contrast - Ionic Maglumine Diatrizoate Sod 76%, 20 Ml 1050 Contrast - Ionic Maglumine Diatrizoate Sod. 65% 50 Ml 1051 Contrast - Non Ionic For Ct / Angio ( Iohexol ) 300 Mg, 10Ml 1052 Contrast - Non Ionic For Ct / Angio ( Iohexol ) 300 Mg, 40Ml 1053 Contrast - Non Ionic For Ct / Angio ( Iohexol ) 350Mg, 100 Ml 1054 Contrast - Non Ionic For Ct / Angio ( Iopromide ) 370 Mg, 50Ml 1055 Contrast - Non Ionic For Ct / Angio ( Lopromide ) 370Mg100ml 1056 Contrast - Non Ionic For Mri ( Gadolium Based ) 10Ml 1057 Contrast - Non Ionic For Mri ( Gadolium Based ) 10Ml Prefilled Syringe 1058 Contrast - Non Ionic For Mri ( Gadolium Based ) 15Ml 1059 Contrast - Non Ionic For Mri ( Gadolium Based ) 20Ml 1060 Contrast - Non Ionic Isosmolar 320Mg 100Ml 1061 Contrast - Non Ionic Isosmolar 350Mg 100Ml 1062 Contrast -Diatrizoate Meglumine And Diatrizoate Sodium 30Ml. 1063 Contrast For Ultrasound Sulfur Hesafluoride Microbubbles 25Mg 1064 Contrast Iomeprol 400 Mg 100 Ml 1065 Contrast Non Ionic 300Mg, 100Ml 1066 Contrast Non Ionic 300Mg, 50Ml 1067 Contrast Non Ionic 370Mg, 100Ml 1068 Contrast Non Ionic 370Mg, 50Ml 1069 Contrast Non Ionic 50Ml 1070 Contrast Non Ionic 75Ml 1071 Contrast Non Ionic For Ct Iohexol 250Mg / Ml 20Ml 1072 Contrast Non Ionic Iopamidol 370Mg, 100Ml 1073 Contrast Non Ionic Iopamidol 370Mg, 50Ml 1074 Contrast Non Ionic Iopamidol 370Mg, 75Ml 1075 Contrast Non Ionic Iopromide 370Mg, 100Ml 1076 Contrast Non Ionic Isomolar Iodixanol 320Mg, 100Ml 1077 Contrast-Non Ionic For Ct ( Iohexol ) 300Mg / Ml, 100Ml 1078 Contrast-Non Ionic For Ct ( Iohexol ) 300Mg / Ml, 40Ml 1079 Contrast-Non Ionic For Ct ( Iohexol ) 300Mg / Ml, 50Ml 1080 Contrast-Non Ionic For Ct ( Iopromide ) 300Mg / Ml, 100Ml 1081 Contrast-Non Ionic For Ct ( Iopromide ) 300Mg / Ml, 50Ml 1082 Coral Calcium With Vit D And K 1083 Cotrimazole+Clindamycin+Tinidazole 1084 Cotrimazole+Clindamycin+Tinidazole ( Forte ) 1085 Co-Trimoxazole 1086 Co-Trimoxazole 1087 Cotrimoxazole ( Tmp / Smx-40 / 200 Mg / 5Ml ) 1088 Cotrimoxazole ( Tmp / Smx-80 / 400 Mg / 5Ml ) 1089 Cranberry Extract 300 Mg + D-Mannose 600 Mg 1090 Cranberry Hibiscus & D-Mannose 1091 Crizotimib 200Mg 1092 Crizotimib 250Mg 1093 Cromolyn Sodium 1094 Crotamiton Ointment 1095 Crp Kit, Semiquantitative Latex Agglutination, Serial Dilutional Method, Slide Method 1096 Curcumin & Piperine 150 Ml 1097 Curcumin 300 Mg 1098 Cyclobenzapine Hcl 15Mg 1099 Cyclobenzaprine Hcl 30Mg 1100 Cyclophosphamide 1000Mg 1101 Cyclophosphamide 200Mg 1102 Cyclophosphamide 500Mg 1103 Cyclophosphamide 50Mg 1104 Cyclophosphomide 200Mg 1105 Cyclophosphomide 1000Mg 1106 Cycloscrine 1107 Cycloserine 1108 Cyclosporin 100Mg 1109 Cyclosporin 10Mg 1110 Cyclosporin 1Ml 1111 Cyclosporin 25Mg 1112 Cyclosporin 2Ml 1113 Cyclosporin 50Mg 1114 Cyclosporin 50Ml 1115 Cyproheptadine + Lysine 1116 Cyproheptadine + Lysine 200Ml 1117 Cyproheptadine 100 Ml 2Mg / 5Ml 1118 Cyproheptadine 200Ml 2Mg / 5Ml 1119 Cyproheptadine 4Mg 1120 Cyproheptadine Peptone & Lysine 1121 Cyproterone Actet + Ethinylestr 1122 Cytosine 1000Mg 1123 Cytosine 100Mg 1124 Cytosine 500 Mg 1125 Cytosorb 300Ml 1126 Cytrabine 100 Mg 1127 Cytrabine 1000 Mg 1128 D.D.A.C 1Gm + 1-Propanol 40 Gm 500Ml Pack En 1129 Dabigatran 1130 Dabigatran Etexilate 75Mg 1131 Dabigatran Etixilate Mesilate 110Mg 1132 Dabigatran Etixilate Mesilate 150Mg 1133 Dacarbazine 200Mg 1134 Dacarbazine 500Mg 1135 Daclatasvir 30 Mg 1136 Daclatasvir 60 Mg 1137 Daclatasvir 90 Mg 1138 Daclizumab 25Mg 1139 Dactinomycin. 5 Mg 1140 Danaproid 1141 Danazol 100Mg 1142 Danazol 200 Mg 1143 Danazol 50 Mg 1144 Dapagliflozin 10 Mg 1145 Dapagliflozin 10 Mg + Metformin 500 Mg 1146 Dapagliflozin 5 Mg 1147 Dapagliflozin 5 Mg + Metformin 1000 Mg 1148 Dapoxetin 30Mg 1149 Dapoxetin 60Mg 1150 Dapoxetin 60Mg 1151 Dapsone I.P.100Mg 1152 Daptomycin 350 Mg Inj 1153 Daratumunab 400 Mg / 20Ml 1154 Darbapoetien 100Mcg 1155 Darbapoetien 200Mcg 1156 Darbapoetien 25 Mcg 1157 Darbapoetien 40Mcg 1158 Darbepoetin Alfa 25 Mcg 1159 Darbepoetin Alfa 60 Mcg 1160 Darbepoetin Alfa 60Mcg 1161 Darifenacin Extended 15Mg 1162 Dasatinib 50Mg 1163 Dasatinib 70Mg 1164 Daunorubicine 20Mg 1165 Ddavp 1166 Ddavp 1167 Decadurabolin 50Mg 1168 Decitabine 1169 Deferasirox 100Mg 1170 Deferasirox 180Mg 1171 Deferasirox 200 Mg 1172 Deferasirox 250Mg 1173 Deferasirox 360Mg 1174 Deferasirox 400Mg 1175 Deferasirox 500Mg 1176 Deferasirox 90Mg 1177 Deferiprone 500Mg 1178 Deferoaxamine 500 Mg 1179 Deflazacort 12Mg 1180 Deflazacort 1Mg 1181 Deflazacort 24Mg 1182 Deflazacort 30Mg 1183 Deflazacort 48Mg 1184 Deflazacort 6Mg 1185 Degarelix 120Mg Vial 1186 Degarelix 80Mg Vial 1187 Degludac 300 Mg / 3 Ml 1188 Denosumab 1189 Denosumab 120Mg 1190 Denosumab 60 Mg 1191 Deoderm Patch 4X4 1192 Deoderm Patch 8X8 1193 Deptomycin 350Mg 1194 Derifenocin 15 Mg 1195 Derifenocin 15 Mg 1196 Derifenocin 7.5 Mg 1197 Derifenocin 7.5 Mg 1198 Desferrioxamine 0.5 Mg 1199 Desferrioxamine 0.5 Mg 1200 Desflurane Agent For Inhalation 240Ml 1201 Desloratidine 5Mg 1202 Desmopressin 1203 Desmopressin 1204 Desmopressin 0.1 Mg 1205 Desmopressin 0.1 Mg / Ml In 2.5 Ml 1206 Desmopressin 0.2 Mg 1207 Desmopressin Oral Lyophilisate 120 Mcg 1208 Desmopressin Oral Lyophilisate 60 Mcg 1209 Desogestel & Ethinylestradiol 1210 Desonide 30Ml 1211 Desvenlafaxine 100 Mg 1212 Desvenlafaxine 25 Mg 1213 Desvenlafaxine 50 Mg 1214 Desvenlafaxine 50 Mg 1215 Detemer 300 Unit / 3 Ml ( Flexpen ) 1216 Dexametha Acet. + Framycetin Solution 1217 Dexametha Acet. + Framycetin Sulution 1218 Dexamethasone 1219 Dexamethasone 0.01% 1220 Dexamethasone 0.5Mg 1221 Dexamethasone 20Mg 1222 Dexamethasone 2Ml 1223 Dexamethasone 4 Mg 1224 Dexamethasone 4Mg 1225 Dexamethasone 8 Mg 1226 Dexamethasone 8Mg 1227 Dexamethasone Intraocular 40 Mg / Ml 1228 Dexamethasone Shock Pack 1229 Dexamethasone Sodium Phosphate 1230 Dexarabeprazole Sodium 10Mg Vial 1231 Dexchlorpheramine Sr 6 Mg 1232 Dexketoprofen 12.5 Mg In Mentholated Gel Base 1233 Dexketoprofen 25 Mg Water For Injection Q.S 1234 Dexketoprofen Trometamol Equivalent To Dexketoprofen 25 Mg 1235 Dexlansoprazole Mr 30 Mg 1236 Dexlansoprazole Mr 60 Mg 1237 Dexmedetomidine Hcl 100Mcg / Ml, 2Ml 1238 Dexraprazole Sod.10Mg+Domperidone 30Mg 1239 Dextranomar Hyaluronic Acid 1240 Dextranomar Hyaluronic Acid 1241 Dextranomer Hyaluronic Acid 1242 Dextrometherphan Hbr 1243 Dextromethorphan Hydrobromide Ip 10Mg, Cpm Ip 2Mg, Phenylephrine Ip 5Mg ( Flavoured And Sugar Free ) 1244 Dextromethorphen + Triprolidine Hcl + Phenypherine 1245 Dextromethorphen + Triprolidine Hcl + Phenypherine 1246 Dextromethrophan 10Mg+ Bromhexine 8Mg+ Ammonium Chloride 100Mg+Menthol 5Mg 1247 Dextroproxyphene Napslyate Usp 100Mg Acetaminophane Ip 400Mg 1248 Dextrose 5% 500Ml ( Should Be Sterilized At 121°C, Should Have Closure System, This Closure System Having Innovative Two-Parts, Should Meet Global Standards, Should Have Transparency As Glass Bottles ) 1249 Dextrose Normal Saline 500Ml ( Should Be Sterilized At 121°C, Should Have Closure System, This Closure System Having Innovative Two-Parts, Should Meet Global Standards, Should Have Transparency As Glass Bottles ) 1250 Diastase 50Mg + Pepsin 10% 1251 Diatrizote Sodium 25% W / V 1252 Diazepam 1253 Diazepam 10 Mg / 2 Ml 1254 Diazepam 10Mg 1255 Diazepam 2Mg 1256 Diazepam 5Mg 1257 Diazoxide 50 Mg 1258 Diazoxide 50Mg 1259 Dicerin Gm 1260 Dicerine 1261 Diclofenac + Paracetamol Mr 1262 Diclofenac 100Mg 1263 Diclofenac Diethylamine 1264 Diclofenac Diethylamine 1.16 W / V Capsaicin 0.025% Methyl Salicylate 5% W / W, Menthol 2% W / W 1265 Diclofenac Diethylamine; Linseed Oil; Methyl Salicylate & Menthol 1266 Diclofenac Diethylamine; Linseed Oil; Methyl Salicylate & Menthol 30Gm 1267 Diclofenac Diethylammonium 1268 Diclofenac Potassium+Dicyclomine Hcl 1269 Diclofenac Pottasium + Paracetamol + Chlorzoxazone 1270 Diclofenac Sodium 1271 Diclofenac Sodium 100Mg S.R. 1272 Diclofenac Sodium 150Mg Ir / Er 1273 Diclofenac Sodium 30Gm 1274 Diclofenac Sodium 50Mg 1275 Diclofenac Sodium 50Mg+Paracetamol 500Mg 1276 Diclofenac Sodium 75Mg 1277 Diclofenac Sodium 75Mg / 3Ml 1278 Diclofenac Spray 1279 Diclofenac Suppository 1280 Diclofenac Transdermal Patch 100Mg 1281 Diclofenac Transdermal Patch 200Mg 1282 Diclofenac+Thiocolchiside ( 50+8Mg ) 1283 Dicyclomin 1284 Dicyclomin 1285 Dicyclomine + Activated Dimethicone 1286 Dicyclomine + Activated Dimethicone 1287 Dicyclomine + Simethicon Drop 1288 Dicyclomine + Simethicon Drop 30Ml 1289 Dicyclomine 20Mg + Diclofenac 50Mg 1290 Dicyclomine Hydrochloride10mg+Propoxyphene Napsylate 100Mg+Acetominophen 400Mg 1291 Diethyl Carbamazine 100Mg 1292 Diethyl Carbamazine 50Mg 1293 Digestive Tonic 1294 Digoxin 0.25Mg 1295 Digoxin 0.5Mg / 2Ml 1296 Digoxin 30Ml 1297 Digoxin 60Ml 1298 Diltiazem 120 Mg 1299 Diltiazem 120 Mg Sr 1300 Diltiazem 2% 1301 Diltiazem 240Mg Sr 1302 Diltiazem 25Mg / 5Ml 1303 Diltiazem 30 Mg 1304 Diltiazem 60 Mg 1305 Diltiazem 90Mg 1306 Diltiazem 90Mg Sr 1307 Dimethicon+Parrafin 1308 Dimethicone+Polyethyleneglycolt Potassium Chloride+Sodium Bicarbonate+Sodium Chloride 1309 Dimethyl Fumerate 120Mg Delayed Release 1310 Dimethyl Fumerate 240Mg Delayed Release 1311 Dimethyl Sulphoxide 100Ml 1312 Dimethyl Sulphoxide 10Ml 1313 Dinoprostone 0.5 1314 Dinoprostone 0.5 1315 Diosmin + Hesperidon 1316 Diphenoxylate Hydrochloride+Atropine Sulphate 1317 Diphtheria, Tetanus & Pertussis Vaccine 1318 Diphtheria, Tetanus & Pertussis Vaccine 1319 Dipthira Tetnus 1320 Dipyridamole + Aspirin ( 100+150 ) 1321 Dipyridamole + Aspirin ( 100+75 ) 1322 Dipyridamole 100Mg 1323 Dipyridamole 25Mg 1324 Disodium Hydrogen Citrate 1325 Disogestrol+Ethinyl Estradiol 1326 Distilled Water 1 Lt 1327 Distilled Water 2 Lt 1328 Distilled Water 3 Lt 1329 Distilled Water 5 Lt 1330 Distilled Water 500 Ml 1331 Distilled Water With Facility For Hanging On Iv Stand 1 Ltr 1332 Distilled Water With Facility For Hanging On Iv Stand 2 Ltr 1333 Distilled Water With Facility For Hanging On Iv Stand 500 1334 Dithramol +Coaltar+Salicylic 1335 Divalproex Sodium 1000Mg Extended Release 1336 Divalproex Sodium 500 Mg 1337 Divalprox Sodium 250 Mg 1338 Divalprox Sodium 750 Mg 1339 Divalprox Sodium Er 250 Mg 1340 Divalprox Sodium Er 500 Mg 1341 Dobutamine 250Mg 1342 Dobutamine Lypholised 250 Mg 1343 Docetaxel Concentrate 120Mg 3Ml With Solvent 1344 Docetaxel Concentrate 20Mg 0.5Ml With Solvent 1345 Docetaxel Concentrate 80Mg With Solvent 1346 Docusate Sodium 100Mg 1347 Dolutegravir 50 Mg 1348 Domperidon 10Mg 1349 Domperidon 30Mg Sr 1350 Domperidon 5Mg 1351 Domperidon10 Mg+Omeprazol 20 Mg 1352 Domperidon10 Mg+Omeprazol10 Mg 1353 Domperidone 30Ml 1354 Donepazil 5Mg 1355 Donepezil 10Mg 1356 Donepezil 5 Mg + Memantine 10 Mg 1357 Donepezil 5 Mg + Memantine 5 Mg 1358 Donepezil 7.5 Mg 1359 Donepezil Sr 12.5Mg 1360 Donepezil Sr 23Mg 1361 Dopamine 200Mg / 5Ml 1362 Doripenam 250 Mg 1363 Doripenam 500Mg 1364 Doripenem 18 Mg 1365 Dothiepin 25Mg 1366 Dothiepin 50Mg 1367 Dothiepin 75Mg 1368 Doxecalciferol 1369 Doxepin 10Mg 1370 Doxepin 25Mg 1371 Doxepin 25Mg 1372 Doxepin 50Mg 1373 Doxepin 75Mg 1374 Doxofylline 400Mg 1375 Doxofylline Ip 400 Mg + Ambroxol Hydrochloride Ip 30 Mg 1376 Doxofylline Ip 400 Mg + Montelukast 10 Mg 1377 Doxorubicin 10 Mg 1378 Doxorubicin 10 Mg Ready To Use 1379 Doxorubicin 50 Mg 1380 Doxorubicin 50 Mg Ready To Use 1381 Doxorubicin Hcl Liposomal 50Mg 1382 Doxorubicin Liposomal 20Mg 1383 Doxycycline 100Mg 1384 Doxycycline 100Mg 1385 Doxylamine+Pyridoxine 1386 Doxylamine+Pyridoxine+Folic Acid 1387 Dport Closure System .9% 100 Ml 121º C Sterile Ns 1388 Droperidol 1389 Droperidol 1390 Drosperinone +Ethinyl Estradiol 1391 Drosperinone 0.15 Mg And Ethinylestradiol 0.02 Mg 1392 Drosperinone 0.15 Mg And Ethinylestradiol 0.03 Mg 1393 Drotavarine 1394 Drotavarine 1395 Drotaverine + Mafenic Acid 1396 Drotavrine Hcl 1397 Drotecogin Alpha 1398 Drotecogin Alpha 1399 Dry Citrate Concentrate With Dry Bicarbonate Concentrate Part A And Part B 1400 Dry Sodium Bicarbonate Bibag 650Gm 1401 Dry Sodium Bicarbonate Bibag 900Gm 1402 Ducosate Sodium Bp 0.5% W / V 1403 Dulaglutide 0.75 Mg 1404 Dulaglutide 1.5 Mg 1405 Duloxetine 30Mg 1406 Duloxetine Hcl 10 Mg 1407 Duloxetine Hcl 20 Mg 1408 Duloxetine Hcl 40 Mg 1409 Duloxitine Hcl 60Mg 1410 Durvalumab 120Mg / 2.4Ml 1411 Durvalumab 500Mg / 10Ml 1412 Durvalumab 50Mg / Ml 1413 Dutasteride + Transulosin ( 0.5 + 0.4 ) Mg 1414 Dutasteride 0.5 Mg 1415 Dydrogesterone 10 Mg 1416 Dynaprestone 10Mg Vaginal Pesseries 1417 Dynaprestone 10Mg Vaginal Pesseries 10 Mg 1418 Earbitux 100Mg Vial 20Ml 1419 Ebastine 10 Mg 1420 Ebastine+Phenylephrine 1421 Ebastine+Phenylephrine 1422 Eberaconazole 1423 Ecluzumab 1424 Eflonithine Hcl 1425 Electrolyte-M, 500 Ml ( Should Be Sterilized At 121°C, Should Have Closure System, This Closure System Having Innovative Two-Parts, Should Meet Global Standards, Should Have Transparency As Glass Bottles ) 1426 Electrolyte-P, 500 Ml ( Should Be Sterilized At 121°C, Should Have Closure System, This Closure System Having Innovative Two-Parts, Should Meet Global Standards, Should Have Transparency As Glass Bottles ) 1427 Elemental Calcium 150 Mg 1428 Elemental Iron With Vitamin 1429 Eltrombopag Olamine 25 Mg 1430 Eltrombopag Olamine 50 Mg 1431 Embramine Hcl 25 Mg 1432 Emollient - Glycerin Cream 1433 Emollient - Urea + Lactic A In Paraffin 1434 Empagliflozin 10 Mg 1435 Empagliflozin 25 Mg 1436 Enalapril Maleate 1437 Enalapril Maleate 10Mg 1438 Enalapril Maleate 10Mg+Hydrochlorthiazide 25 Mg 1439 Enalapril Maleate 2.5Mg 1440 Enalapril Maleate 5Mg 1441 Enalapril Maleate+Actitol Monohydrute 200 Ml 1442 Enalapril+Hydrochlorthizide ( 5+12.5 ) 1443 Enalapril+Hydroehlathiazide ( 10+12.5 ) 1444 Entecavir 1445 Entecavir 0.5Mg 1446 Entecavir 1Mg 1447 Enteral Nutrition Products For All Types Of Dialysis Patients ( Gluten Free, All Types And Pack Sizes ) 1448 Enteral Nutrition Products For All Types Of Dialysis Patients ( Gluten Free, All Types And Pack Sizes ) 1449 Enteral Nutrition Products For General Patients ( Gluten Free, All Types And Pack Sizes ) 1450 Enteral Nutrition Products For General Patients ( Gluten Free, All Types And Pack Sizes ) 1451 Enteral Nutrition Products Of All Types For Liver Failure Patients ( Gluten Free, All Types And Pack Sizes ) 1452 Enteral Nutrition Products Of All Types For Liver Failure Patients ( Gluten Free, All Types And Pack Sizes ) 1453 Enteral Nutrition Products Of All Types For Renal Failure Patients ( Gluten Free, All Types And Pack Sizes ) 1454 Enteral Nutrition Products Of All Types For Renal Failure Patients ( Gluten Free, All Types And Pack Sizes ) 1455 Enteral Nutrition Products Of All Types For Burn And Trauma Patients 1456 Enteral Nutrition Products Of All Types For Burn And Trauma Patients 1457 Enteral Nutrition Products Of All Types For Diabetic Patients ( Gluten Free, All Types And Pack Sizes ) 1458 Enteral Nutrition Products Of All Types For Diabetic Patients ( Gluten Free, All Types And Pack Sizes ) 1459 Enteral Nutrition Products Of All Types For Respiratoryfailure Patients ( Gluten Free, All Types And Pack Sizes ) 1460 Enteral Nutrition Products Of All Types For Respiratory Failure Patients ( Gluten Free, All Types And Pack Sizes ) 1461 Enteral Nutrition Products Of All Types With High Protein Content ( Gluten Free, All Types And Pack Sizes ) 1462 Enteral Nutrition Products Of All Types With High Protein Content ( Gluten Free, All Types And Pack Sizes ) 1463 Enteral Tube Feed Standard 400Gm ( Gluten Free, All Types And Pack Sizes ) 1464 Enteral Tube Feed Standard 56Gm ( Gluten Free, All Types And Pack Sizes ) 1465 Enteric Coated Sodium Bicarbonate 500 Mg 1466 Enz. Omega Fo. Acid Alpha Di. 1467 Enzalutamide 40 Mg 1468 Enzalutamide 40 Mg 1469 Epalrestat 1470 Epalrestat + B1+B6+B12 1471 Eperisone 150 Mg Sr 1472 Eperisone Hydrochloride 150 Mg + Diclofenac Sodium Ip 100 Mg 1473 Ephedrine Sulphate 50 Mg 1474 Ephedrine Sulphate 50Mg 1475 Epidermal Growth Factor 15 Gm 1476 Epidermal Growth Factor 7.5 Gm 1477 Epirisone Hcl Diclofenac ( Sr ) 1478 Epirubicin 10 Mg Ready To Use 1479 Epirubicin 50 Mg Ready To Use 1480 Epirubicine 10 Mg 1481 Epirubicine 100 Mg 1482 Epirubicine 150 Mg 1483 Epirubicine 50 Mg 1484 Epithelone 50 Mg 1485 Epithelone 50 Mg 1486 Epithelone 70 Mg 1487 Epithelone 70 Mg 1488 Eplerenone 25Mg 1489 Eplerenone 50Mg 1490 Eprisone 1491 Eptifibatide ( 20Mg / 10Ml ) 1492 Eptifibatide ( 75Mg / 100Ml ) 1493 Ergocalciferol 60000Iu 1494 Eribulin Mesylate 1 Mg / 2 Ml 1495 Erlotinib 100Mg 1496 Erlotinib 150Mg 1497 Ertapenem Sodium1gm 1498 Erythromycin 1499 Erythromycin 100Mg / Ml Oral Drops 1500 Erythromycin 250Mg. 1501 Erythromycin 500Mg 1502 Erythromycin 60Ml 1503 Erythropoetein 1000 -Alpha 1504 Erythropoetein 1000 -Beta 1505 Erythropoetein 1000 -Thermostable 1506 Erythropoetein 6000 1507 Erythropoetein 8000 1508 Erythropoetien 2000-Alpha 1509 Erythropoetien 2000-Beta 1510 Erythropoetien 2000-Thermostable 1511 Erythropoetien 3000 -Alpha 1512 Erythropoetien 3000 -Beta 1513 Erythropoetien 3000 -Thermostable 1514 Erythropoetien 4000 -Alpha 1515 Erythropoetien 4000 -Beta 1516 Erythropoetien 4000 -Thermostable 1517 Erythropoteien 10, 000-Alpha 1518 Erythropoteien 10, 000-Beta 1519 Erythropoteien 10, 000-Thermostable 1520 Erythropoteien 30000 Cartridge 1521 Erythropoteien 30000-Alpha 1522 Erythropoteien 30000-Beta 1523 Erythropoteien 30000-Thermostable 1524 Erythropoteien 40000-Alpha 1525 Erythropoteien 40000-Beta 1526 Erythropoteien 40000-Thermostable 1527 Escitalopram 10 Mg 1528 Escitalopram 5 Mg 1529 Escitalopram Oxalate + Clonazepam ( 10 / 0.25 ) 1530 Escitalopram Oxalate + Clonazepam ( 10 / 0.5 ) 1531 Escitalopram Oxalate + Clonazepam ( 5 / 0.25 ) 1532 Escitalopram Oxalate 10Mg 1533 Escitalopram Oxalate 20 Mg 1534 Escitalopram Oxalate 5 Mg 1535 Escitalopram+Olonazepam ( 10+10 ) 1536 Eslicarbazepine 400Mg 1537 Eslicarbazepine 600Mg 1538 Esmolol 100Mg 1539 Esmolol 250Mg / 10Ml 1540 Esmoprazole 40Mg 1541 Esomeprazol+Levosulpride 1542 Esomeprazole 40Mg +Domperidone 30Mg 1543 Esomeprazole+Itopride 1544 Esomoprazole 20 Mg 1545 Esomoprazole 40 Mg 1546 Esomoprazole Magnesium & Domperidon 1547 Essential Amino Acids 1548 Essential Phospholipids 1549 Essential Phospholipids + Vital Vit 30Mg 1550 Estaloperam 10Mg 1551 Estaloperam 5Mg 1552 Estradiol Valerate 2 Mg 1553 Estramustine Phosphate 140Mg 1554 Estrogen 1555 Etanercept 25 Mg 1556 Etanercept 50 Mg 1557 Ethambutol 1000 Mg 1558 Ethambutol 1200 Mg 1559 Ethambutol 200 Mg 1560 Ethambutol 400 Mg 1561 Ethambutol 600 Mg 1562 Ethambutol 800 Mg 1563 Ethamsyate 250Mg 1564 Ethamsyate 250Mg / 2Ml 1565 Ethamsyate 500Mg 1566 Ethamsylate 250Mg+Tranexamic Acid 250Mg 1567 Ethinamide 250 Mg 1568 Ethinyl Estradiol 0.01Mg 1569 Ethinyl Estradiol 0.05Mg 1570 Ethosuxomide 250 Mg 1571 Ethyl Chloride ( Spray For La On Skin ) 1572 Ethyl Esters Of Iodized Fatty Acid Of Poppy Seed Oil 10 Ml 1573 Ethylene Vinyl Alcohol Copolymer With Iodine And Dmso 1574 Ethylene Vinyl Alcohol Copolymer With Micronized Tantalum Powder And Dmso 1575 Ethylene Vinyl Alcohol Copolymer With Tantalum Powder And Dmso 1576 Etizolam 0.25 Mg 1577 Etizolam 0.5 Mg + Escitalopram 10 Mg 1578 Etizolam 0.5 Mg + Propranolol Hydrochloride Ip 1579 Etizolam 0.5Mg 1580 Etizolam Tablet 1Mg 1581 Etizolam ( 0.5Mg ) & Escitalopram Oxalate ( 5Mg ) 1582 Etodolac 200 Mg 1583 Etodolac 200 Mg + Thiocolchicoside 4 Mg 1584 Etodolac 300 Mg 1585 Etodolac 5% W / W + Camphor 4% W / W + Menthol 10% W / W + Methyl Salicylate 5% 4 / W + Linseed Oil 3% W / W 1586 Etofyllin & Theophlline 2 Ml 1587 Etomidate 1588 Etophylline + Theophylline 100Mg 1589 Etophylline + Theophylline 100Ml 1590 Etophylline + Theophylline 20Mg 1591 Etophylline+Theophylline 100Mg 1592 Etophylline+Theophylline 2Ml 1593 Etophylline+Theophylline Retard 150Mg 1594 Etophylline+Theophylline Retard 300Mg 1595 Etophylline+Theophylline Retd 150Mg 1596 Etophylline+Theophylline Retd 300Mg 1597 Etoposide 100Mg 1598 Etoposide 50Mg 1599 Etopride Hcl 50Mg 1600 Etoricoxib + Thiocalchiside 1601 Etoricoxib 120 Mg 1602 Etoricoxib 60Mg 1603 Etoricoxib 90 Mg 1604 Euphobia Prostrata Extract 1605 Euphorbia Prostrata Extract 100Mg 1606 Euphoria Prostate Extract 1607 Evening Primosa 1608 Evening Primosa Oil 1 Gm 1609 Everolimus 0.25 Mg 1610 Everolimus 0.50 Mg 1611 Everolimus 0.75 Mg 1612 Everolimus 10 Mg 1613 Everolimus 5 Mg 1614 Evolocumab 140 Mg / Ml 1615 Exemestane 25Mg 1616 Exenatide 10Mcg 1617 Exenatide 5Mcg 1618 Eye Applicap Chloramphenical 1619 Eye Drop Atropine 1620 Eye Drop Azelastine 1621 Eye Drop Betaxalol .5% 1622 Eye Drop Brimonidine Tartrate 2Mg 1623 Eye Drop Chloramphenicol 1624 Eye Drop Ciprofloxacin 1625 Eye Drop Cyclopentolate 0.5% 1626 Eye Drop Cyclopentolate 1% 1627 Eye Drop Dexamethasone 0.01% 1628 Eye Drop Dorzolamate+Timolol 1629 Eye Drop Gatifloxacin 1630 Eye Drop Hydroxy Propyl Methylcellulose 1631 Eye Drop Ketotiprofen+Tromethamilone 1632 Eye Drop Latanaprost 50 Mcg 1633 Eye Drop Latanoprost 50 Mcg + Timilol 1634 Eye Drop Natamycin 1635 Eye Drop Ofloxacin + Dexamethasone 1636 Eye Drop Pilocarpin 0.5% Drop 1637 Eye Drop Pilocarpin 2% ( 5Ml ) Drop 1638 Eye Drop Sodium Hyalunate: 0.1% Preservative Free With Comode 1639 Eye Drop Sparfloxacin 1640 Eye Drop Timolol 0.5% 1641 Eye Drop Timolol Maleate 0.5% Preservative Free With Comode 1642 Eye Drop Timolol+Pilocarpine 1643 Eye Drop Tobramycin 1644 Eye Drop Travopost 1645 Eye Drop Tropicamide+Phenylephrin 1646 Eye Drops Betamethasone + Neomycin 1647 Eye Drops Brimonidine Tartrate P 0.15% 1648 Eye Drops Carboxy Methyl Cellulose 1649 Eye Drops Chlorphenramine 1650 Eye Drops Cromolyn Sodium 1651 Eye Drops Diclofenac Sodium 1652 Eye Drops Dorzolamide Hcl 1653 Eye Drops Fluconazole 1654 Eye Drops Fluoromethqlone 1655 Eye Drops Flurbiprofen Sodium 1656 Eye Drops Framycetin 1657 Eye Drops Gatifloxacin 1658 Eye Drops Gentamycin 1659 Eye Drops Glucomol 1660 Eye Drops Homatropine Sulhate 1661 Eye Drops Hypromellose 1662 Eye Drops Keterolac 1663 Eye Drops Ketotifen 1664 Eye Drops Levobunolol Hydrochloride 0.5% 1665 Eye Drops Loteprednol Etabonate 1666 Eye Drops Moisol 1667 Eye Drops Moxifloxacin 1668 Eye Drops Naphazoline+ Chlorpheniramin 1669 Eye Drops Neomycine 1670 Eye Drops Norfloxacin 1671 Eye Drops Ofloxacin 1672 Eye Drops Oxiconazole Nitrate 1673 Eye Drops Phenylephrine Hcl 10% 1674 Eye Drops Phenypherine Hcl + Chlorbutanol 1675 Eye Drops Polyviny + Povi+Chlor. Lubr 1676 Eye Drops Polyviny + Povidone 1677 Eye Drops Potacium Iodine 1678 Eye Drops Prednisolone 1679 Eye Drops Prednisolone + Ofloxacin 1680 Eye Drops Pro Paracaine Hcl 1681 Eye Drops Sodium Chloride 1682 Eye Drops Sodium Cromolyn 1683 Eye Drops Sodium Hyaluronate 0.18% 1684 Eye Drops Sparfloxacin 1685 Eye Drops Sulphacetamide 1686 Eye Drops Timolol Maleate 1687 Eye Drops Tobramycin + Dexamethasone 1688 Eye Drops Tobramycin + Fluorometh 1689 Eye Gel Carboxy Methyl Cellulose 1690 Eye Gel Hpmcopthalmic Solution 1691 Eye Oint Chloramphenical + Polymixin + Bacitracin 1692 Eye Oint Ciprofloxacin 1693 Eye Oint Ciprofloxacin+Dexamethasone 1694 Eye Oint Neosporin 1695 Eye Oint Neosporine+Hydrocortisone 1696 Eye Oint Tetracyclin 1% 1697 Eye Oint Tobramycin 1698 Eye Oint. Atropine 1699 Eye Sol Bimatoprost 1700 Eye Sol Oxymetazoline Hcl 1701 Eye Sol. Betaxolol 1702 Eye Strip Fluorescine Sodium 1703 Ezetinibe 10 Mg 1704 Ezetinibe 10 Mg + Atorvastatin 10Mg 1705 Factor Activated Prothrombin Complex 1706 Factor Ix ( 600Iu ) 1707 Factor Viii 1708 Factor Viii ( Monoclonal ) 1709 Fameterol+Eiplanomide Formetrol 1710 Famotidine 20Mg 1711 Famotidine 40Mg 1712 Faropenam Sodium 150 Mg 1713 Faropenam Sodium 200 Mg 1714 Faropenem 300 1715 Fat Emulsion 10% 100Ml 1716 Fat Emulsion 20% 500Ml 1717 Fat Emulsion 20% With Mct 500Ml. 1718 Fe+B12+Folate 1719 Febuxostat 1720 Febuxostat 40Mg 1721 Febuxostat 80Mg 1722 Felodipine 10Mg 1723 Feminine Hygiene Wash 1724 Fenofibrate 145 Mg 1725 Fenofibrate 160 Mg. 1726 Fenofibrate 200Mg 1727 Fentanyl 100 Mcg / 2Ml 1728 Fentanyl 500Mcg / 10Ml Inj. 1729 Fentanyl Lozenzes 1730 Fentanyl Patches 12 Mcg 1731 Fentanyl Patches 25 Mcg 1732 Fentanyl Patches 50 Mcg 1733 Feracrylum 1% 1734 Feracrylum 100 Ml 1735 Ferracryline 1% Eye Oint. 1736 Ferracryline Skin Oint. 1737 Ferramycine+Dexamethasone 1738 Ferric Carbocymaltose Injection 100Mg 1739 Ferric Carbocymaltose Injection 500Mg 1740 Ferric Carboxymaltose 1 Gm 1741 Ferric Citrate Tablet 1742 Ferric Hydroxide In Complex With Sucrose Equivalent To Elemental Iron 20 Mg / Ml 1743 Ferric Pyrophosphate Sucrosoniol Iron 30 Mg 1744 Ferrous Ascorbate 1745 Ferrous Ascorbate Eq. To Elemental Iron 100 Mg+Nicotinamide 25 Mg+Folic Acid 10 Mg+Vitamin B6 10 Mg+ Calcium Pantothenate 6 Mg+Vitamin B2 3 Mg+Vitamin B1 2 Mg+Methylcobalamin 500 Mcg+Biotin 300 Mcg 1746 Ferrous Ascorbate Equivalent To Elemental Iron 30 Mg + Folic Acid 550 Mcg 1747 Ferrous Ascorbate Equivalent To Elemental Iron 100 Mg + Folic Acid 1.1 Mg 1748 Ferrous Ascorbate Equivalent To Elemental Iron 100 Mg + Folic Acid 1.1 Mg + Methylcobalamin 1.5 Mg + Zinc Sulfate Monohydrate Equivalent To Elemental Zinc 22.5 1749 Ferrous Ascorbate Methylco. Zinc 200 Ml 1750 Ferrous Fumarate 1751 Ferrous Furmate Pyri Hydro Folic Acid 1752 Ferrous Furmate Pyri Hydro Folic Acid 1753 Ferrous Sulphate 1754 Ferrous Sulphate 200Mg 1755 Ferrous Sulphate With Copper + Magnesium 1756 Ferrous Sulphate+Folic Acid 1757 Ferrous Sulphate+Folic Acid+Zinc 1758 Ferrous Sulphate+Folic Acid+Zinc 200Ml 1759 Ferrous Sulphate+Folic Acid200ml 1760 Fexofenadine 1761 Fexofenadine 120Mg 1762 Fexofenadine 180Mg 1763 Fibrin Sealant Glue For Microneural Repair And Skin Grafting 1764 Fibrin Sealent Solution 1 Ml 1765 Fibrin Sealent Solution 2 Ml 1766 Fibrin Sealent Solution Vhs / D 2Ml 1767 Fibrin Sealent Solution Vhs / D 4Ml 1768 Filgrastim 30 Miu 1769 Finasteride 5Mg 1770 Fixed Drug Combination Of Sofosbuvir 400 Mg + Ledipasvir 90 Mg 1771 Flash Glucose Monitoring Tool 1772 Flash Glucose Monitoring Tool 1773 Flavonol Glycosides & Vitamin 1774 Flavoxate 20Mg 1775 Flavoxate Hcl 1776 Flecainide 1777 Flecainide 1778 Floroquinolone 1779 Flowable Gelatine Matrix 1780 Flu Vaccine 0.5 Ml ( Immunoglobuline ) 1781 Flucloxacillin 1 Gm 1782 Flucloxacillin 1 Gm 1783 Flucloxacillin 18 Mg 1784 Flucloxacillin 18 Mg 1785 Flucloxacillin 500 Gm 1786 Flucloxacillin 500 Gm 1787 Fluconazole 1788 Fluconazole + Azithromycin + Ornidazole 1789 Fluconazole 100Mg 1790 Fluconazole 150Mg 1791 Fluconazole 200Mg 1792 Fluconazole 50Mg 1793 Fluconazole Dry Powder Susp 50 Ml 1794 Fluconazole Ip 150 Mg + Ivermectin 12 Mg 1795 Fluconazole Iv 100Ml 1796 Flucytosine 250 Mg 1797 Flucytosine 500 Mg 1798 Fludarabine Phosphate 10Mg 1799 Fludarabine Sulphate 50 Mg 1800 Fludrocortisone 0.1Mg 1801 Fluid 3% Hypertonic Saline 100Ml 1802 Fluid Acid Concentrate With Na + 103 1803 Fluid Dextrose 5% 500Ml In Glass Bottle Packing 1804 Fluid I V Dextrose 5%With0.9% Nacl 100Ml 1805 Fluid I.V. Dextrose 25% 25Ml 1806 Fluid I.V. Dextrose 25% 25Ml 1807 Fluid I.V. Dextrose 25% 25Ml. Coll Bag 1808 Fluid Irrigant Saline 1.5% Glycine 3Ltr 1809 Fluid Irrigant Saline 1.5% Glycine 3Ltr 1810 Fluid Irrigant Saline 1.5% Glycine 3Ltr 1811 Fluid Irrigant Saline 3% Glycrine 1812 Fluid Iv 5% Dextrose With 0.2% Nacl 500 Ml 1813 Fluid Iv Dex 5% In Water 1000Ml Coll Bag 1814 Fluid Iv Dex 5% In Water 100Ml Coll Bag 1815 Fluid Iv Dex 5% With 0.9% Nacl 1000Ml 1816 Fluid Iv Dextrose 10% 100Ml 1817 Fluid Iv Dextrose 10% 100Ml Coll Bag 1818 Fluid Iv Dextrose 10% 500Ml 1819 Fluid Iv Dextrose 10% 500Ml Coll Bag 1820 Fluid Iv Dextrose 20% 500Ml 1821 Fluid Iv Dextrose 20% 500Ml Coll Bag 1822 Fluid Iv Dextrose 25% 100Ml 1823 Fluid Iv Dextrose 25% 100Ml Coll Bag 1824 Fluid Iv Dextrose 5% 500Ml 1825 Fluid Iv Dextrose 5% 500Ml Coll Bag 1826 Fluid Iv Dextrose 5%With 0.9% Nacl 100 Ml 1827 Fluid Iv Dextrose 50% 25Ml 1828 Fluid Iv Dextrose 50% 25Ml 1829 Fluid Iv Dextrose 50% 25Ml Coll Bag 1830 Fluid Iv Dextrose With Saline 500Ml 1831 Fluid Iv Dextrose With Saline 500Ml Coll Bag 1832 Fluid Iv Irrigant Saline 1.5% , Glycin 3Lt 1833 Fluid Iv Isolyte - P ( 500Ml ) 1834 Fluid Iv Isolyte - P ( 500Ml ) Coll Bag 1835 Fluid Iv Isolyte-M 500Ml 1836 Fluid Iv Isolyte-M 500Ml Coll Bag 1837 Fluid Iv Normal Saline 100 Ml In Closed System 1838 Fluid Iv Normal Saline 1Ltr 1839 Fluid Iv Normal Saline 250 Ml In Closed System 1840 Fluid Iv Normal Saline 2Ltr. 1841 Fluid Iv Normal Saline 500Ml 1842 Fluid Iv Normal Saline 500Ml Coll Bag 1843 Fluid Iv Ns 0.9% Nacl 100 Ml 1844 Fluid Iv Ringer Lactate 500Ml 1845 Fluid Iv Ringer Lactate 500Ml Coll Bag 1846 Fluid Iv Saline 3% 100Ml 1847 Fluid Iv Saline 3% 100Ml Coll Bag 1848 Fluid Iv Sodium Chloride 0.45%, 500 Ml With Dextrose 1849 Fluid Iv Sodium Chloride 0.45%, 500 Ml With Dextrose Coll Bag 1850 Fluid Iv Sodium Chloride 0.45%, 500 Ml Without Dextrose 1851 Fluid Iv Sodium Chloride 0.45%, 500 Ml Without Dextrose Coll Bag 1852 Fluid Iv Tinidazole 400Ml 1853 Fluid Iv Tinidazole 400Ml Coll Bag 1854 Fluid Sucrose 20% 1855 Flunarizine 10Mg 1856 Flunarizine 5Mg 1857 Flunarizine Dihydrochloride 10 Mg 1858 Flunarizine Dihydrochloride 5 Mg 1859 Fluorescine Sodium 1860 Fluorescine Sodium 20% 1861 Fluorescine Sodium 20% 1862 Fluorometholone+Tobramycin 1863 Fluoromethqlone 1864 Fluorouracil 1865 Fluoxetine 10 Mg 1866 Fluoxetine 20 Mg 1867 Fluoxetine 40 Mg 1868 Fluoxitine 10Mg 1869 Fluoxitine 20Mg 1870 Flupenthixol 2Hcl 1 Mg 1871 Flupenthixol 2Hcl 3 Mg 1872 Flupenthixol Decanoate 40 Mg 1873 Flupenthixol Hcl 0.5 Mg 1874 Flupenthixol+Melitracen 1875 Flupentixol 0.5Mg 1876 Flupentixol 0.5Mg 1877 Flupertine 1878 Flupirtine Maleate 1879 Flurbiprofen 200 Mg 1880 Flurbiprofen Sodium 1881 Flurouracil 250 Mg 1882 Flurouracil 500 Mg 1883 Flutamid 250Mg 1884 Flutamid 250Mg 1885 Fluticasone 1886 Fluticasone 1887 Fluticasone Cream 1888 Fluticasone Propionate + Mupirocin 1889 Fluticasone Propionate Inhaler 125 1890 Fluticasone+Azilastin 1891 Fluticasone+Terbinafine 1892 Fluticasone+Terbinafine 1893 Fluticasone-Salmeterol ( 5 / 125Ug ) 1894 Fluticasone-Salmeterol ( 5 / 250Ug ) 1895 Fluticasone-Salmterol ( 5 / 250 Ug ) 1896 Fluticasone-Salmterol ( 5 / 125 Ug ) 1897 Flutishon Proponate 1898 Fluvoxamine 100Mg 1899 Fluvoxamine 50Mg 1900 Fofestrol Sodium 120Mg 1901 Folic Acid 1902 Folic Acid + Cynocobalmin 1903 Folic Acid + Cynocobalmin 1904 Folic Acid + Cynocobalmin 1905 Folic Acid + Zycopen + Dha + Zinc 1906 Folic Acid 0.70 Mg Methylcobalamin 1500 Mcg Nicotinamide 12 Mg Vitamin C 150 Mg 1907 Folic Acid 5Mg 1908 Folic Acid Drops 1909 Folic Acid, Methycobalamin Pyriod. 1910 Folic Acid+ Cynocobalmin 1911 Folic Acid+Methycobyl+Pyridoxcin 1912 Folic Acid+Zyeopen+Dha+Zinc ) 1913 Folinic Acid 2.5 Mg 1914 Folinic Acid 2.5Mg 1915 Fondaparinux Sod. 2.5Mg / 0.5Ml 1916 Formaldehyde 1917 Formaldehyde 500Ml 1918 Formaldehyde Liquid 5 Lit 1919 Formeterol-Budesonide ( 6 / 200Ug ) 1920 Formeterol-Fluticasone ( 6 / 100 Ug ) 1921 Formeterol-Fluticasone ( 6 / 100 Ug ) 1922 Formeterol-Fluticasone ( 6 / 250 Ug ) 1923 Formeterol-Fluticasone ( 6 / 250 Ug ) 1924 Formeterol-Tiotropium Bromiode ( 6 / 9Ug ) 1925 Formeterol-Tiotropium Bromiode ( 6 / 9Ug ) 1926 Formeterol-Tiotropium Bromiode ( 6 / 18Ug ) 1927 Formeterol-Tiotropium Bromiode ( 6 / 18Ug ) 1928 Formetrol + Budesonide 200 Mt Dose 1929 Formetrol Respules 0.5 Mcg 1930 Formetrol Respules 1 Mcg 1931 Formitral + Budesonide Inhal-200 1932 Formitral + Budesonide Inhal-400 1933 Formoterol Fumarte 200 Rotacap 1934 Formoterol Fumarte 400 Rotacap 1935 Formoterol Furmarate Budesonide 0.5 ( 2Ml ) 1936 Formoterol+Bunesonide Dpi Device 4.5 / 160 1937 Formoterol+Bunesonide Dpi Device 6 / 200 1938 Formoterol+Mometasone 400 Rotacaps 1939 Formoterol-Budesonide ( 12 / 400Ug ) 1940 Formoterol-Budesonide ( 4.5 / 160 ) 1941 Formoterol-Budesonide ( 6 / 200Ug ) 1942 Formula Feed For Term Neonate, Containing Per 100Gm Energy-490-500 Cal, Proteins-10-15 Gm, Fat-20-25 Gm, Carbohydrate 60-80 Gm 1943 Formula Feed-Preterm, Lbw Containing Per 100Ml Energy-76Cal, Proteins-1.9Gm, Fat-3.9Gm, Carbohydrate 8.4Gm, Vit D 6471U 1944 Formula Feed-Preterm, Lbw Containing Per 100Ml Energy-88Cal, Proteins-2.2Gm, Fat-4.4Gm, Carbohydrate 9.7Gm 1945 Formula Feed-Term Containing Milk Solids, Corn Oil, Minerals, Vitamins, Soya Lecithin, Soyabean Oil, Algal Oil 1946 Fosaprepitant 150Mg 1947 Fosaprepitant Dimeglumine 1948 Fosfestrol 1949 Fosfomycin Sodium For Injection 4 Gm 1950 Fosfomycin 3 Gm 1951 Fosphenytoin 1952 Fosphenytoin 1953 Framycetin 1954 Framycetin Cream100gm 1955 Framycetin Cream30gm 1956 Framycetin Sulphate 20Gm 1957 Framycetin Sulphate 5Mg + Phenylethyl Alcohol 0.5% 1958 Framycetin Sulphate 5Mg+Phenylethyl Alcohol 0.5% 1959 Frusemide + Amloride 1960 Frusemide + Spironolactone 20+ 100 Mg 1961 Frusemide + Spironolactone 20+50 Mg 1962 Frusemide + Spironolactone 40+ 50 Mg 1963 Frusemide + Spironolactone 50+ 20 Mg 1964 Frusemide 10 Mg / Ml, 2 Ml 1965 Frusemide 100Mg 1966 Frusemide 10Mg 1967 Frusemide 20+Triameterrene 50 Mg 1968 Frusemide 20Mg 1969 Frusemide 20Mg / 1Ml 1970 Frusemide 250Mg 1971 Frusemide 30Ml 1972 Frusemide 40Mg 1973 Frusemide 500Mg 1974 Frusemide 500Mg 1975 Frusibin Hifiber 180 1976 Fulvestrant 250Mg 1977 Fulvestrant 500Mg 1978 Fungal Diaftase+Activated Charcol 1979 Fungal Diastase + Pepsin 1980 Fungal Diastase+Pepsin, 200Ml 1981 Furazolidone + Metronidazole 100+300 1982 Furomonide 200 Mg 1983 Furosemide 1984 Fusidic Acid 2% 1985 Fusidic Acid 2% 1986 G I Imaging Capsules 1987 Gabapantin 100 Mg 1988 Gabapantin 300Mg 1989 Gabapantin 300Mg +Mecobalamin500mcg 1990 Gabapentin & Nortriptyline Hydrochloride 1991 Gabapentin 100Mg And Amitriptyline 10Mg Bl 1992 Gabapentin 300Mg + Methycobalamin 0.5 Mg + Alpha Lipic Acid 100Mg 1993 Gabapentin 400Mg 1994 Gabapentin Sr 450Mg 1995 Gabapentin Sr 600Mg 1996 Gabapentin+Mecobalamine+Tocoferol 1997 Gadobenate Dimeglumine 15Ml 1998 Gadobutrol Solution For Injection 10 Ml 1999 Gadobutrol Solution For Injection 5 Ml 2000 Gadobutrol Solution For Injection 7.5 Ml 2001 Gadodiamide Gd-Dtpa-Bma 10 Ml 2002 Gado-Xelate Sodium Gd-Eob-Dtpa 2003 Gamma Benzene Hexachloride + Cetrimide Emulsion 100 Ml 2004 Gamma Delta Tocotrienol 400 Mg 2005 Gamma Lanolenic Acid + Methycob 2006 Gamma Lenoic Acid 2007 Ganciclovir 250Mg 2008 Ganciclovir 500Mg 2009 Gancyclovir 250Mg 2010 Gancyclovir 500Mg 2011 Gatifloxacin 2012 Gatifloxacin 2Mg / 1Ml 200 Ml 2013 Gatifloxacin 400Mg 2014 Gd-Bopta ( Gadobenate Disodium ) 2015 Gd-Dtpa Gadopentate 2016 Gd-Dtpa-Bmea 2017 Gefitnib 250Mg 2018 Gefitnib 400 Mg 2019 Gelatins 4% With Average Molecular Wt. < 35, 000 Daltons 2020 Gemcitabin 200 Mg 2021 Gemcitabin Hcl 1Gm 2022 Gemcitabine 1.4 Gm 2023 Gemfibrozil 300 Mg 2024 Gemfibrozil 600 Mg 2025 Gemifloxacin 2026 Gentamycin 2027 Gentamycin 20Mg 2028 Gentamycin 80Mg 2029 Gentamycin Eye Oint. 2030 Gentamycin Eye Respules 2031 Gentamycin Skin Oint. 2032 Gentian Violet Paint 0.5% 2033 Ginkgo Biloba 2034 Glargine 10 Ml 2035 Glargine 10 Ml 2036 Glargine 100 Mg / 300 Iu 2037 Glargine 100 Mg / 3Ml 2038 Glargine 3 Ml 2039 Glargine 3 Ml 2040 Glargine 300 Mg 2041 Glatira 20 Mg 2042 Glatiramer Acitate 2043 Glibenclamide 5Mg 2044 Glibenclamide Metformin 2045 Glibenelamide 2.5Mg 2046 Gliclazide & Metformin Hcl 30 Mg + 500 Mg 2047 Gliclazide & Metformin Hcl 80 Mg + 500 Mg 2048 Gliclazide 40Mg 2049 Gliclazide 60 Mg 2050 Gliclazide 80Mg 2051 Gliclazide Modified Release 60Mg 2052 Gliclazide+Metformin Er 2053 Glimepiride 0.5 Mg 2054 Glimepiride 1Mg 2055 Glimepiride 2Mg 2056 Glimepiride 3 Mg 2057 Glimepiride Ip 2 Mg + Metformin Hydrochloride Ip 1000 Mg ( In Sustained Release Form ) 2058 Glimepiride Ip 3 Mg + Metformin Hydrochloride Ip 1000 Mg ( In Sustained Release Form ) 2059 Glimepiride Ip 3 Mg + Metformin Hydrochloride Ip 500 Mg ( In Sustained Release Form ) 2060 Glimepiride Ip 4 Mg + Metformin Hydrochloride Ip 1000 Mg ( In Sustained Release Form ) 2061 Glimepiride Ip 4 Mg + Metformin Hydrochloride Ip 500 Mg ( In Sustained Release Form ) 2062 Glimepride 4 Mg 2063 Glimepride+Meformin 2064 Glimipride 1Mg + Metformine 500 2065 Glimipride 2Mg + Metformine 500 2066 Glimipride+Metformin+Pioglitazone-1 2067 Glimipride+Metformin+Pioglitazone-2 2068 Glipizide 2.5 Mg 2069 Glipizide 5Mg 2070 Glipizide+Metformin 2071 Glipmepride+Metformin 850 Gm 2072 Gloves Powder 800 Gm 2073 Glucagon 1Mg 2074 Glucometer Of Latest Technology 2075 Glucomol 2076 Gluconate 80 Ml 2077 Glucosamine & Methylsulfonymethane 2078 Glucosamine 750Mg+Chondroitin 600Mg 2079 Glucosamine Chondroitin Antioxidant 2080 Glucosamine Sodium+Ascorbic Acid+Msm+Zinc+Tocopherol 2081 Glucosamine Sulfate +Vitamin E 2082 Glucosamine Sulfate 500Mg 2083 Glucosamine Sulph Vitamin Mag. 2084 Glucosamine Sulphate + Chondroitin Sulphate ( 750Mg+400Mg ) 2085 Glucosamine Sulphate + Vitamin C + Msm + Zinc+Tocoferol 2086 Glucosamine Sulphate+Chondrotin Sulphate 2087 Glucose Powder 100Gm 2088 Glucose Powder 200Gm 2089 Glucose Powder 500Gm 2090 Glucostick Ketone Strips 2091 Glucostick Strips ( Technical Specifications As Per Annexure-A ) 2092 Glulisine 3 Mg / 300 Ml 2093 Glutamine 2094 Gluthathione 500 Mg 2095 Glyceril Trinitrate 2.5Mg 2096 Glyceril Trinitrate 2.6Mg 2097 Glycerin 2098 Glycerin 2099 Glycerin Ip 15% 2100 Glycerin+Silica+Sod. Phosphosilicate+Sol. Laurg+Titanium Carbomer+Potassium Aesulfame 2101 Glycerine Ip 400 Gm 2102 Glyceryl Trinitrate 2103 Glyceryl Trinitrate 2104 Glyceryl Trinitrate 2105 Glyceryl Trinitrate 0.5 Mg 2106 Glyceryl Trinitrate 10Mg 2107 Glyceryl Trinitrate 2.6 Controlled Rel 2108 Glyceryl Trinitrate 5Mg 2109 Glyclazide+Metformin 2110 Glycolic Acid 12% ( 20Gm ) 2111 Glycolic Acid Lotion 12% 2112 Glycolic Acid Lotion 6% 2113 Glycolic Acid+Hydroquinone +Kojic Acid Lotion 2114 Glycolic Acid+Hydroquinone Lotion 2115 Glycopyrollate 0.2 Mg / Ml 2116 Glycopyrollate+Neogistimine 2117 Glyvin Iv 500Ml 2118 Gm-Csf 500Mcg 2119 Gold Sodium Thiomalate 50 Mg 2120 Golimumab 50Mg 2121 Goserelin 3.6Mg 2122 Granisetron 2123 Granisetron 1 Ml 2124 Granisetron 1Mg 2125 Granisetron 3Mg 2126 Granisetron 3Ml 2127 Granulocyte Collection Kit 2128 Granulocyte Macrophage Csf 400 Mcg 2129 Gravity Set For Liquid Enteral Feed 2130 Griseofulvin 250Mg 2131 Growth Factor ( Monoclonal Colony Stimulating ) 2132 Growth Factors ( All Types, Exact Chemical Composition, Concentrations And Pack Volumes To Be Quoted ) 2133 Haematenic 2134 Haematenic 2135 Haematenic With Release Iron 2136 Haemo Filteration & Hemo Dialysis Solution 5 Ltr 2137 Haemocoagulase 2138 Haemophilus B Conjugate Vaccine 2139 Hair Removal Cream 25 Gm 2140 Hair Revitalizing Lotion 2141 Halobetasol Propionate + Salicylic Cream 2142 Halobetasol Propionate Cream 2143 Haloperidol + Benzhexol 2144 Haloperidol + Tripoxyphenydile 2145 Haloperidol 0.25Mg 2146 Haloperidol 0.50Mg 2147 Haloperidol 1.5Mg 2148 Haloperidol 2.5Mg 2149 Haloperidol 5Mg 2150 Haloperidol 5Mg 2151 Halothane 250Ml 2152 Hd Fluid Bicarb Without Dextrose 10Lit 2153 Hd Fluid Bicarb Without Potassium ( 10 Lit ) 2154 Hd Fluid Bicarb Without Calcium 10 Ltr. 2155 Hd Fluid For Crrt Machine With No Potassium ( K Free ) 2156 Hd Fluid For Crrt Machine With 2 Meq / L Potassium 2157 Hd Fluid For Crrt Machine With 4 Meq / L Potassium 2158 Hd Fluid For Crrt Machine 5 Ltr 2159 Hd Fluid For Crrt Machine With No Calcium ( Ca Free ) 2160 Hd Fluid With Dextrose Acetate 10 Ltr. 2161 Heat Stable Erythropoetien 2162 Hem Iron Polypeptide 2163 Hematinic With Vit. B12 200 Ml 2164 Hemocoagulant 2165 Hemoglobulin / Hematocrit Strips 2166 Hemostatic Matrix Sealent 5Ml 2167 Heparin & Benzyl Nicotinate 2168 Heparin 10 Iu 2 Ml 2169 Heparin 15 Gm 2170 Heparin 25000 Iu Or 5000 Iu / Ml 2171 Heparin 5000 Iu Or 1000Iu / Ml 2172 Heparin 5000Iu 2173 Heparin Low Molecular Wt ( Nadroparine ) 2174 Heparin Low Molecular Wt 0.3Ml ( Nadroparine ) 2175 Heparin Low Molecular Wt 0.4Ml ( Nadroparine ) 2176 Heparin Low Molecular Wt 10000 Iu ( Dalteparine ) 2177 Heparin Low Molecular Wt 1600 Iu ( Parnaparin ) 2178 Heparin Low Molecular Wt 20 Mg ( Enoxaparine ) 2179 Heparin Low Molecular Wt 2500 Iu ( Dalteparine ) 2180 Heparin Low Molecular Wt 3200 Iu ( Parnaparin ) 2181 Heparin Low Molecular Wt 40Mg ( Enoxaparine ) 2182 Heparin Low Molecular Wt 5000 Iu ( Dalteparine ) 2183 Heparin Low Molecular Wt 60Mg ( Enoxaparine ) 2184 Heparin Low Molecular Wt 6400 Iu ( Parnaparin ) 2185 Heparin Low Molecular Wt 7500 Iu ( Dalteparine ) 2186 Heparin Low Molecular Wt 80Mg ( Enoxaparine ) 2187 Heparin Low Molecular Wt Reviparin 2188 Heparin Sodium 200Iu, 20Gm 2189 Heparin+Allantoin Based 2190 Heparine Low Molecular Wt. 10000 Iu ( Multi Dose ) , 10 Ml 2191 Heparine Low Molecular Wt. 10000 Iu ( Multi Dose ) , 10 Ml 2192 Hepatitis A Vaccine .5 Ml 2193 Hepatitis A Vaccine 0.5 Lt 2194 Hepatitis B Immunoglobulin 1Ml 2195 Hepatitis B Immunoglobulin 2Ml 2196 Hepatitis B Multidose 2197 Hepatitis B Suface Antigen 10Ml 2198 Hepatitis B Surface Antigen 2Ml 2199 Hepatitis B Surface Antigen 5Ml 2200 Hepatitis B Vaccine 0.5Ml 2201 Hepatitis B Vaccine 1 Ml 2202 Hepatitis B Vaccine 2 Ml 2203 Hepotoprotective Herbal 2204 Herpes Zoster Vaccine Live 2205 High Mct Enteral Formula ( High Mct Formula Which Can Be Used For Neonates And Infants Also. Fda Approved ) 2206 High Protein Peptide Powder 2207 High Protein Powder With Eicosapantoic Acid ( Epa ) 2208 High Strength Gluco. & Chon. 2209 Hmg 150Mg 2210 Hmg 75Mg 2211 Homatropine Hydrobromide 2212 Homatropine Sulhate 2213 Hpmc Opthalmic Solution 2214 Htk Solution 2215 Human Chronic Gonadotrophen 2000 I U 2216 Human Chronic Gonadotrophen Hormone 10, 000 I.U 2217 Human Chronic Gonadotrophin 5000 Iu Inj 2218 Human Growth Hormone 10 To 18 Unit ( Or 3 To 6 Mg ) Cartridge For Permanent Pen 2219 Human Growth Hormone 10 To 18 Unit ( Or 3 To 6 Mg ) Disposable Pen 2220 Human Growth Hormone 10 To 18 Unit ( Or 3 To 6 Mg ) Vial 2221 Human Growth Hormone 12Iu 2222 Human Growth Hormone 16Iu 2223 Human Growth Hormone 30 To 45 Unit ( 10 To 15 Mg ) Cartridge For Permanent Pen 2224 Human Growth Hormone 30 To 45 Unit ( 10 To 15 Mg ) Disposable Pen 2225 Human Growth Hormone 30 To 45 Unit ( 10 To 15 Mg ) Vial 2226 Human Growth Hormone 36Iu 2227 Human Growth Hormone 4 Unit ( Or 1 To 2 Mg ) Cartridge For Permanent Pen 2228 Human Growth Hormone 4 Unit ( Or 1 To 2 Mg ) Disposable Pen 2229 Human Growth Hormone 4 Unit ( Or 1 To 2 Mg ) Vial 2230 Human Insulin Humalog 2231 Human Insuline 30 / 70 100 2232 Human Insuline N 2233 Human Insuline Regular Cartridge 100 Iu 2234 Human Milk Fortifier, Each Gram Containing Energy 3 Kcal, Protein 0.18 Gram, Carbohydrate 0.68 Gm, Calcium 12 Gm, Phosphorus 7.20 Gm, Iron 0.29 Mg, Vitamin D 0.60Mcg, Sodium 4.16 Mg, Potassium 10.56 Mg 2235 Human Milk Fortifier, Each Gram Containing Energy 3.37 Kcal, Protein 0.27 Gram, Fat 0.04 Gram, Carbohydrate 0.49 Gm, Calcium 15.80 Gm, Phosphorus 7.90 Gm, Iron 0.30 Mg, Vitamin D 3.32Mcg, Sodium 1.90 Mg, Potassium 9 Mg 2236 Human Milk Fortifier, Multicomponent 2 Gm 2237 Human Milk Fortifier, Multicomponent 2Gm / Sachet Containing Protein 0.2Gm, Fat 0.1Gm, Calcium 50Ng, Phosphate 25Mg, Sodium 1.75Mg, Vit A 730 Iu, Vitd 250 Iu Energy 7.5 Cal 2238 Human Pappiloma Virus Vaccine 2239 Human Rabbies Immunoglobulin 2240 Human Thrombin Mixture For Microvascular Hemostasis 2241 Hyaluronic Acid Stablized Single 2242 Hyaluronidase 2243 Hydrazine 100 Mg 2244 Hydrcortisone Acetate Foam 10% W / W Enema 2245 Hydrochlorthiazide 12.5Mg 2246 Hydrochlorthiazide 25 Mg 2247 Hydrochlothriazide 100Mg 2248 Hydrochlothriazide 50Mg 2249 Hydrocortisone + Framycetin Sulfate 2250 Hydrocortisone + Naphaxoline 10 Ml 2251 Hydrocortisone 10 Mg 2252 Hydrocortisone 100 Mg 2253 Hydrocortisone 100Mg 2254 Hydrocortisone 20 Mg 2255 Hydrocortisone 5 Mg 2256 Hydrocortisone Acetate 10 Gm 2257 Hydrocortisone Sod. Succinate 100Mg 2258 Hydrocortisone Sodium Succinate 2259 Hydrocortisone+ Tretinoin+ Mometasone Cream 2260 Hydrocortisone+Tetracycline 2261 Hydrogen Peroxide 500Ml 2262 Hydrogen Peroxide 6% 1Litre 2263 Hydrogen Peroxide+Diluted Silver Nitrate Sol. 1 Lit. 2264 Hydrolazine 2265 Hydrolysate Pyridoxine Zinc 2266 Hydromellose & Opthalmic 2267 Hydromellose & Opthalmic 2268 Hydromellose & Opthalmic 2269 Hydroquinone 3% 2270 Hydroquinone 5% 2271 Hydroxy Hydrozine 10 Mg 2272 Hydroxy Hydrozine 25 Mg 2273 Hydroxy Progrestone 500 Mg 2274 Hydroxy Propyl Methyl Cellulose 2% 2275 Hydroxy Propyl Methyl Cellulose 2% W / V 2276 Hydroxy Urea 500Mg 2277 Hydroxychloroquine 200 Mg 2278 Hydroxychloroquine 400Mg 2279 Hydroxychloroquine Sulphate 300Mg 2280 Hydroxycobalamin 1000 Mcg 2281 Hydroxycobalamin 1000Mcg 2282 Hydroxyethyl Starch 6% With Mean Molecular Weight =Or < 200Kg Dalton, Molar Substitute 0.4, Chloride Concentration 120Mmol / L Or Less 2283 Hydroxypropyl Methylcellulose 2284 Hydroxyzine 100 Ml 2285 Hydroxyzine 10Mg 2286 Hydroxyzine 12.5 Mg 2287 Hydroxyzine 25 Mg 2288 Hydroxyzine 25 Mg 2289 Hydroxyzine 50 Mg 2290 Hydroxyzine 50 Ml 2291 Hylan G-F-20 Pfs 6Ml 2292 Hylorinidase 2293 Hynidase ( Hydorinidal ) 2294 Hyoluronate Eye Solution 2295 Hyoscine Butyl Bromide 2296 Hyoscine Butyl Bromide 2297 Hyper Immune Globulin 0.5Ml 2298 Hyper Immune Globulin 40 Ml 2299 Hypromellose 2300 Hypromelose 2% Nacl Kcl Cacl 2301 Ibandronate 150Mg 2302 Ibandronic Acid + Albendazole 2303 Ibrutinib 140 Mg 2304 Ibuprofen 2305 Ibuprofen + Paracetamol 60Ml 2306 Ibuprofen +Tizanidine 2307 Ibuprofen 200 Mg 2308 Ibuprofen 400 Mg 2309 Ibuprofen Syrup 60Ml 2310 Ibutilide Fumarate 0.1 Mg / Ml 2311 Ibutilide Fumarate 0.1 Mg / Ml 2312 Idarubicin Hydrochloride 10Mg 2313 Idarubicin Hydrochloride 25Mg 2314 Idarubicin Hydrochloride 5Mg 2315 Idarubicin Iv Inj. 5Mg 2316 Idebenone 2317 Ifosfamide 1 Gm 2318 Ifosfamide Inj. 1Gm With Mesna 2319 Ifosfamide Inj. 2Gm With Mesna 2320 Ifosphamide With Mesna 0.5Gm 2321 Ilaprazole 2322 Ilaprazole 10Mg 2323 Imatinib 100Mg 2324 Imatinib 400Mg 2325 Imepenum+Cilastatin 250Mg 2326 Imiglucerase 400 Iu 2327 Imipenam + Cilastatin 1 Gm 2328 Imipenam+Cilastatin 500Mg 2329 Imipenem With Closed Delivery System 2330 Imipenum 2331 Imipramine 25Mg 2332 Imipramine 75Mg 2333 Imipramine Hcl 2334 Imiquimod 2335 Inactivated Hepatitis A Vaccine 2336 Inactivated Influenza Vaccine ( Adult ) 2337 Inactivated Influenza Vaccine ( Paed ) 2338 Inactivated Influenza Vaccine Quadrivalent 2339 Indacateral And Glycopyrronium 2340 Indacaterol Dpi 150Mg 2341 Indacaterol Dpi 350Mg 2342 Indapamide 2.5 Mg 2343 Indapamide 1.5 Mg 2344 Indinavir Sulphate 400 Mg 2345 Indomethacin 2346 Indomethacin 1Mg 2347 Indomethacin 25Mg 2348 Indomethacin 75 Mg. 2349 Infant Formula Preparation 2350 Infliximab 100Mg 2351 Inhaler - Salbutamol 200 Dose 2352 Inhaler Baclomethasone - 100 Puff 2353 Inhaler Baclomethasone 200 Puff 2354 Inhaler Baclomethasone 50 Puff 2355 Inhaler Budesonide - 100 2356 Inhaler Budesonide 200 2357 Inhaler Formitral + Budesonide 2358 Inhaler Fumerate 200 Md 2359 Inhaler Fumerate 400 Md 2360 Inhaler Fumerate 400Md 2361 Inhaler Ipratropium 2362 Inhaler Levosalbutamol 2363 Inhaler Rota Haler ( Use Of Rotacap ) 2364 Inhaler Salbutamol+Baclamethasone 2365 Inhaler Salmeterol + Fluticasone 125 2366 Inhaler Salmeterol + Fluticasone 250 2367 Inhaler Salmeterol 200 Md. 2368 Inhaler Theoasthaline 2369 Inhaler Tiotropium Bromide Inhaler 2370 Iniradican 2371 Inj. Lomeprol 400Mg 2372 Inj. Methylergotamine 2373 Inj. Palanosetron 75 Mg 2374 Injectable Polio Vaccine ( Ipv ) 2375 Insulin 25 / 75 Aspart / Nph Cartridge For Pen 100U 3 Ml Vial 2376 Insulin 25 / 75 Aspart / Nph Premixed Disposable Pen 100U 300 Units 2377 Insulin 25 / 75 Lispro / Nph Premixed Cartridge For Pen 100U 3 Ml Vial 2378 Insulin 25 / 75 Lispro / Nph Premixed Disposable Pen 100U 300 Units 2379 Insulin 30 / 70 Regular / Nph Cartridge For Pen 100U 3 Ml 2380 Insulin 30 / 70 Regular / Nph Premixed Disposable Pen 100U 300 Units 2381 Insulin 30 / 70 Regular / Nph Premixed Vial 40U 10 Ml Vial 2382 Insulin 50 / 50 Regular / Nph Cartridge For Pen 100U 3 Ml 2383 Insulin 50 / 50 Regular / Nph Cartridge For Pen 100U 3 Ml Vial 2384 Insulin 50 / 50 Regular / Nph Premixed Disposable Pen 2385 Insulin 50 / 50 Regular / Nph Premixed Vial 40U 10 Ml Vial 2386 Insulin Aspart 2387 Insulin Aspart 2388 Insulin Aspart 100U Cartridge For Pen 3 Ml. 2389 Insulin Aspart 100U Pre Filled Disposable Pen 300 Units 2390 Insulin Aspart 30% + Insulin Aspart Protamine 70% 100 Iu 3 Ml 2391 Insulin Aspart 30% + Insulin Aspart Protamine 70% 100 Iu 3 Ml 2392 Insulin Biphasic Aspart 30 / 70 2393 Insulin Biphasic Aspart 30 / 70 2394 Insulin Degludac 2395 Insulin Degludac 2396 Insulin Degludac ( R-Dna Origin ) 3 Ml 2397 Insulin Detemir 100U Pre Filled Disposable Pen 300 Units 2398 Insulin Detemir 100U Cartridge For Pen 3 Ml 2399 Insulin Glargine 100U Cartridge For Pen 3 Ml. 2400 Insulin Glargine 100U Vial 3 Ml. 2401 Insulin Glargine 100U Vial 5 Ml. 2402 Insulin Glargine 100U Pre Filled Disposable Pen 300 Units 2403 Insulin Glulisine 100U Cartridge For Pen 3 Ml. 2404 Insulin Glulisine 100U Pre Filled Disposable Pen 300 Units 2405 Insulin Human 30 / 70 100Iu 2406 Insulin Human30 / 70 Cartridge 100 Iu 2407 Insulin Lispro 100U Cartridge For Pen 3 Ml. 2408 Insulin Lispro 100U Pre Filled Disposable Pen 200 Units / Ml 2409 Insulin Lispro 100U Pre Filled Disposable Pen 300 Units 2410 Insulin Needle 2411 Insulin Nph 100 Iu Cartridges ( Eli ) 2412 Insulin Nph 100U Cartridge For Pen 3 Ml 2413 Insulin Nph 100U Pre Filled Disposable Pen 300 Units 2414 Insulin Nph 100U Vial 10 Ml 2415 Insulin Nph 40U Vial 10 Ml 2416 Insulin Permanent Pen For Use Of All Types Of Insulin Cartridges ( I.E. Solostar, Glaritus Pen, Novo Nordisk, Biocon, , Etc. ) 2417 Insulin Regular 100U Cartridge For Pen 3 Ml 2418 Insulin Regular 100U Pre Filled Disposable Pen 300 Units 2419 Insulin Regular 100U Vial 10 Ml 2420 Insulin Regular 40U Vial 10 Ml 2421 Insuline Regular 100 Iu Cartridges ( Eli ) 2422 Interferon 3 Miu 2423 Interferon 4.5 Miu 2424 Interferon 5 Miu 2425 Interferon Beta 1A 2426 Interferon Multidose 18 Miu 2427 Interferon Peg 100 Mcg 2428 Interferon Peg 120 Mcg 2429 Interferon Peg 30 Miu. 2430 Interferon Peg 50Mcg 2431 Interferon Peg 80Mcg 2432 Intralipid 20% ( 100 Ml ) 2433 Intralipid 20% ( 250 Ml ) 2434 Iodine For Ot Preparation Of Graves Patients 2435 Iodixanol 270Mg / Ml 2436 Iomeprol 100Mg / Ml 2437 Iomeprol 30Mg / Ml 2438 Iomeprol 400Mg / Ml 2439 Iomeprol 50Mg / Ml 2440 Iort-3 2441 Ipratropium Brom.Resp.Soln. 15Ml 2442 Ipratropium Bromide 2443 Ipratropium Bromide + Salbutamol 2444 Ipratropium Bromide 0.025% Solution For Inhalation 2445 Ipratropium Bromide 500Ug 2446 Ipratropium Bromide Respules 2447 Irabradone 5Mg 2448 Irinotecan 100Mg 2449 Irinotecan 40Mg 2450 Iron ( Iii ) Hydroxide Plymatose Complex 100Mg+Folic Acid 5Mcg 2451 Iron + Vitamin+Mineral 200 Gm 2452 Iron Dextran 50Mg / Ml, 2Ml 2453 Iron Dextran Inj. 50Mg / Ml, 2Ml 2454 Iron Dextran Inj. 50Mg / Ml, 500 Ml 2455 Iron Drops Containing 15Mg / Ml Of Elemental Iron Folic Acid 200Ug.Ml 2456 Iron Drops Containing 25Mg / Ml Of Elemental Iron Folic Acid 200Ug.Ml 2457 Iron Drops Containing 30Mg / Ml Of Elemental Iron Folic Acid 200Ug.Ml 2458 Iron Folic Acid 2459 Iron Folic With Methycobalamin 2460 Iron Hydroxide 2461 Iron Hydroxide Polymaltose 2462 Iron Isomaltoside 100 Mg / Ml 2463 Iron Isomaltoside 500 Mg / 5Ml 2464 Iron Sucrose 2465 Iron Sucrose 5 Mg 2466 Iron With Zinc 200Ml 2467 Iron, Folic Acid & Vit B12 2468 Iron+Mineral+Vit B+Etc 2469 Irrigating Fluid With Glutathione 50 Ml 2470 Isabgol Husk 100Gm 2471 Isabgol Husk 200 Gm 2472 Isabgol Husk 200 Gm ( Natural ) 2473 Isabgol Husk 300Gm 2474 Isepamicin 250Mg 2475 Isoflavane 60 Mg 2476 Isoflavone + Calcitrol + Cacuz 2477 Isoflavone Cr 2478 Isoflavones With Genistein & Cal. ( All Strength ) 2479 Isofluorane 100Ml 2480 Isoflurane 250Ml 2481 Isomaltoside 2482 Isoniazed ( 100Mg / 5Ml ) 2483 Isoniazid 100 Mg 2484 Isoniazid 300 Mg 2485 Isoniazid 50 Mg 2486 Isoprenalin 2487 Isosorbide - 5 & Mononitrate 2488 Isosorbide Dinitrate 10 Mg Ret. 2489 Isosorbide Dinitrate 10Mg 2490 Isosorbide Dinitrate 20Mg Ret. 2491 Isosorbide Dinitrate 5 Mg Ret. 2492 Isosorbide Dinitrate 5Mg 2493 Isosorbide Mononitrate + Closporin 2494 Isosorbide Mononitrate 10Mg 2495 Isosorbide Mononitrate 20Mg 2496 Isosorbide Mononitrate 30Mg + Aspirin 2497 Isosorbide Mononitrate 30Mg Sr 2498 Isosorbide Mononitrate 60Mg 2499 Isotonic Balanced Colloid Tetrastarch 500Ml 2500 Isotretinoin 10 Mg 2501 Isotretinoin 20 Mg 2502 Isoxpurine 10Mg. 2503 Isoxsuprine 20 Mg Sr 2504 Isoxsuprine Hcl 10Mg / 2Ml 2505 Isoxsuprine Retard 40 Mg 2506 Itolizumab 25Mg / 5Ml 2507 Itone Eye Drop 2508 Itopride 150 Mg 2509 Itopride 50 Mg 2510 Itraconazole 2511 Itraconazole 100Mg 2512 Itraconazole 200Mg 2513 Itraconazole 200Mg / 20Ml 2514 Iv Omega 3 Fatty Acids 2515 Iv Trace Elements As Individual Elements Or In Various Combinations 2516 Ivabardine 7.5 Mg 2517 Ivabradine 5Mg 2518 Ivermectin 12Mg 2519 Ivermectin 6Mg 2520 Ivermectine 12 Mg + Albendazole 400 Mg 2521 Ivermectine 6 Mg + Albendazole 400 Mg 2522 Ivig 0.5 Gm 2523 Ivig 1 Gm 2524 Ivig 10 Gm 2525 Ivig 2.5 Gm 2526 Ivig 20 Gm 2527 Ivig 5 Gm 2528 Ixabepilone 15Mg 2529 Ixabepilone 45Mg 2530 Kanamycin 150 Mg 2531 Kanamycin 300 Mg 2532 Ketamin 100Mg / 10Ml 2533 Ketamin 100Mg / 2Ml 2534 Ketamin 100Mg / 5Ml 2535 Keteonazole + Coltar 2536 Keterolac 2537 Keterolac - Dt 10Mg 2538 Ketoconazole +Zpto 2539 Ketoconazole 200Mg 2540 Ketoconazole Ip 2% W / W 2541 Ketomin 2542 Ketoprophen 50Mg / Ml 2543 Ketorolac 10Mg 2544 Ketorolac 10Mg 2545 Ketorolac 30Mg 2546 Ketorolac 30Mg / Ml 2547 Ketorolac Tromethamine 2548 Ketorolac Tromethamine Moxifloxacin 2549 Ketosteril 2550 Ketosteril 2551 Ketotifen 2552 Ketotifen 1 Mg 2553 Ketotiprofen+Tromethamilone 2554 Ketprofen Ip 30 Mg 2555 Kojic Acid Dipalmitate + Lactic Acid + Arbutin 2556 L - Glutamine 15 Gm 2557 L - Omithine 2558 Labetalol 100 Mg 2559 Labetalol 50 Mg 2560 Labetolol ( 4Ml ) 2561 Lacosamide 2562 Lacosamide 100Mg 2563 Lacosamide 150Mg 2564 Lacosamide 200Mg 2565 Lacosamide 50Mg 2566 Lactacyed Wash ( Hygine Wash ) 2567 Lactic Acid 0.07% + Lactoserum ( 1.01% ) Lotion For Perionel Wash 2568 Lactic Acid Bacillus + Probiotic 2569 Lactic Acid Bacillus 1.8Gm 2570 Lactic Acid Vaginal Wash 2571 Lactictol + Isabgol 2572 Lactilol Monohydrate 10Gm 2573 Lactilol Monohydrate 20Gm 2574 Lactitol Monohydrate + Ispaghula Husk 2575 Lactitol Monohydrate 200 Ml 2576 Lactitol Monohydrate 450 Ml 2577 Lacto Bacillus Sporogenes Probiotic 2578 Lactobacillius 60Ml 2579 Lactobacillus ( Adult ) 2580 Lactobacillus ( Paed ) 2581 Lactobacillus+Streptococcus Faecallis+Bifidobactrium 2582 Lactobacilus+Vit C+Vit.B Complex 2583 Lactocalamine 30 Ml 2584 Lactocalamine 60 Ml 2585 Lactose Free Milk Formula - 1 2586 Lactose Free Milk Formula - 2 2587 Lactose Granules 2588 Lactulose Enema 250 Ml 2589 Lactulose Enema 275 Ml 2590 Lactulose Enema 500 Ml 2591 Lactulose ( Fibre ) 2592 Lactulose 100Ml 2593 Lactulose 200Ml 2594 Lactulose 450Ml 2595 Lactulose 60Ml 2596 Lactulose Free Infant Formula Preparation - 1 2597 Lactulose Free Infant Formula Preparation - 2 2598 Lactulose With Isabgula Husk 2599 Ladacaine+ Benzalkonium + Choline Salicylate 2600 Ladacaine+ Benzalkonium + Choline Salicylate 2601 L-Alpha Glyceryl Phosphorylcholine 2602 Lamivudine 100Mg 2603 Lamivudine 150Mg + Zidovudine 300Mg 2604 Lamotrigine 100Mg 2605 Lamotrigine 25Mg 2606 Lamotrigine 50Mg 2607 Lamotrigine 5Mg 2608 Lamotrigine Sr 100Mg 2609 Lamotrigine Sr 50Mg 2610 Lanolin Oint 20 Gm 2611 Lansoprazole 15Mg 2612 Lansoprazole 30Mg 2613 Lanthanum Carbonate 250 Mg 2614 Lanthanum Carbonate 500 Mg 2615 Lapatinib Ditosylate 250 Mg 2616 L-Arginine Proanthocyan 2617 L-Arginine With Vitamin C & Vitamin E 10 Gm 2618 Laronidase 2.9 Mg / 5 Ml 2619 Laronidase 2.9 Mg / 5Ml 2620 L-Asparaginase 10000Iu 2621 L-Asparaginase 3750 Iu / 5Ml 2622 L-Asparaginase 5000Iu 2623 Laxativ 2624 Laxative Oral Solution ( Milk Of Magnesia ) 2625 L-Carnitine L-Tartrate Eq. To L-Carnitine 500 Mg Methylcobalamin 500 Mg Folic Acid Ip 1.5 Mg 2626 L-Carnitine L-Tartrate, Ubidecerenone, Zinc & Lyconpene 2627 L-Carnitine+L-Tartnate+Methycobalamin+Folic Acid 2628 L-Carnitine-L-Tartarate & Vitamin E 2629 Lecithin 500Mg 2630 Ledipasvir 90 Mg 2631 Leflunomide 10 Mg 2632 Leflunomide 20Mg 2633 Lenalidomide 10Mg 2634 Lenalidomide 2 5Mg 2635 Lenalidomide 5Mg 2636 Lenograstim 2637 Lenvatinib 10 Mg 2638 Lenvatinib 10Mg 2639 Lenvatinib 4 Mg 2640 Lenvatinib 4Mg 2641 Lercandipine 10 Mg 2642 Lercandipine 5 Mg 2643 Lercanidipine+Atenolol 2644 Letrozole 5 Mg 2645 Letrozole Tab 2.5 Mg 2646 Leucovorin 15 Mg 2647 Leucovorin 30 Mg 2648 Leucovorin 50Mg 2649 Leuprolide Acetate 11.25Mg 2650 Leuprolide Acetate 22.5Mg 2651 Leuprolide Acetate 3.75 Mg 2652 Leuprolide Acetate 45 Mg 2653 Leuprolide Acetate 7.5 Mg 2654 Levamisole Hcl 150 Mg 2655 Levamisole Hcl 300 Mg 2656 Levamisole Hcl 50 Mg 2657 Levamisole Hydrochloride Ip Equivalent To Levamisole 150Mg 2658 Leveteracetam 1Gm 2659 Leveteracetam 250Mg 2660 Leveteracetam 750Mg 2661 Leviteracetam 2662 Leviteracetam 500Mg 2663 Leviteracetam 500Mg / 15Ml 2664 Levobunolol Hydrochloride 0.5% 2665 Levobupivacaine Hcl 2666 Levocarnitine 1 Gm 2667 Levocarnitine 330 Mg 2668 Levocarnitine 500 Mg 2669 Levocarnitine+Iron+Folic Acid 2670 Levocetirizine 10 Mg 2671 Levocetrizine + Montelukast Sodium Mouth Dissolving 2672 Levocetrizine 2.5 Mg 2673 Levocetrizine 5 Mg 2674 Levocetrizine Dihcl, Ambroxol & Psedo 2675 Levocloperastine Fendizoate Sus. 2676 Levodopa + Carbidopa + Entacapone 150 2677 Levodopa + Carbidopa + Entacapone 100 2678 Levodopa + Carbidopa + Entacapone 50 2679 Levodopa + Carbidopa +Entacapone ( 100+25+200 ) Mg 2680 Levodopa + Carbidopa +Entacapone ( 150+37.5+200 ) Mg 2681 Levodopa + Carbidopa +Entacapone ( 50+12.5+200 ) Mg 2682 Levodopa + Carbidopa 100Mg+10Mg 2683 Levodopa + Carbidopa 100Mg+25Mg 2684 Levodopa + Carbidopa Cr 200Mg+50Mg 2685 Levodopa +Benserazide 250 Mg 2686 Levodropropizine 2687 Levofloxacin 2688 Levofloxacin 250 Mg Tab 2689 Levofloxacin 500Mg Tab 2690 Levofloxacin 500Mg / 100Ml 2691 Levofloxacin 60 Ml 2692 Levofloxacin 750Mg 2693 Levonorgestrel + Ethinyl Estrodiol 2694 Levonorgestrel 0.75 Mg 2695 Levonorgestrel 1.5 Mg 2696 Levosalbutamol 2697 Levosalbutamol 2698 Levosalbutamol 0.63Mg 2699 Levosalbutamol 1.25Mg 2700 Levosalbutamol ( 50 Ug ) 2701 Levosalbutamol-100Ug 2702 Levosalbutamol-200Ug 2703 Levosimendan 125Mg 2704 Levosimendan 2.5 Mg / Ml 2705 Levosolbutamol+Ipratropium Respules 2706 Levosulpride 2707 Levosulpride 25 Mg 2708 Lidocain 2% 5Gm 2709 Lidocain 5% 20Gm 2710 Lidocaine & Prilocaine Cream30gm 2711 Lidocaine + Beclometosone + Clotrimazole +Chloramphenical 2712 Lignocaine ( Xylocaine ) 1% 50 Ml 2713 Lignocaine 1% 50 Ml 2714 Lignocaine 10% 2715 Lignocaine 10% 2716 Lignocaine 2% Jelly 30Gm 2717 Lignocaine 2% 100Ml 2718 Lignocaine 2% 30Ml 2719 Lignocaine 2% 30Ml With Adrenaline 2720 Lignocaine 2% 50Ml 2721 Lignocaine 4% 2722 Lignocaine 4% Topical 2723 Lignocaine Spray 100Mg 2724 Lignocaine Viscous 100Ml 2725 Linagliptin 2.5Mg+Metformin 1000Mg 2726 Linagliptin 2.5Mg+Metformin 500Mg 2727 Linagliptin 2.5Mg+Metformin 850Mg 2728 Linagliptin 5 Mg 2729 Linagliptin 2.5 Mg 2730 Linagliptin 5 Mg + Metformin 1000 Mg 2731 Linagliptin 5 Mg + Metformin 500 Mg 2732 Linazolid 300 Mg 2733 Linceed Oil 3%+Diclofenac Diethylanine+Menthol+Methyl Salicylate +Benzyl Alchohol 2734 Linceed Oil 3%+Diclofenac Diethylanine+Menthol+Methyl Salicylate +Benzyl Alchohol 2735 Linezolid ( 20Mg / Ml ) 2736 Linezolid + Cefixim 2737 Linezolid 600 Mg 2738 Linezolid Iv 300Ml 600Mg 2739 Lipaglyn 4Mg 2740 Lipid Alone ( All Types, Concentrations And Volumes Should Be Quoted ) 2741 Lipiodol Ultrafluid 10Ml 2742 Lipiodol Ultrafluid 20Ml 2743 Liposomal Ferric Pyrophosophate 15 Mg 2744 Liq.Parrafin 400Ml 2745 Liquid Paraffin+Milk Of Magnesia 2746 Liquid Parafin 2747 Liraglutide 6Mg / Ml 2748 Lisinopril 10 Mg 2749 Lisinopril 2.5 Mg 2750 Lisinopril 5Mg 2751 Lisinopril 5Mg. + Hydrochlorothiazide 12.5 2752 Lithium Carbonate 300Mg 2753 Liver Protective 2754 Lixisenatide 10 Mg 2755 Lixisenatide 20 Mg 2756 L-Lecithin ( All Types ) 2757 L-Leucine, L-Lysine, Vit A, D, B1, B2, B6, B12, Folic Acid C & E 2758 L-Lysine Hydrochloride 2759 Lomustine 40 Mg 2760 Lopinavir 200 Mg & Ritonavir 50 Mg Ip 2761 Lopramide 2762 Loratadine 10 Mg 2763 Loratidin+Ambroxol 2764 Loratidine 4Mg 2765 Lorazepam 1Mg 2766 Lorazepam 2Mg 2767 Lorazepam 2Mg / Ml, 2 Ml 2768 Lorazepam 3Mg 2769 Lornoxicam 4Mg 2770 Lornoxicam 8Mg 2771 Lornoxican+Paracetamol 2772 Lorvastatin 20Mg 2773 Losartan + Metoprolol 2774 Losartan 25Mg 2775 Losartan 50+Hydrochlorthiazide 12.5Mg 2776 Losartan 50+Ramipril 1.25 2777 Losartan 50Mg 2778 Lovastatin 10Mg 2779 Lovastatin 20Mg 2780 Low Fat Wholewhey Protein Powder ( Specialized Formula ) 400 Gm 2781 Low M.W. Dextran 40 2782 Lubiprostone 24 Mcg 2783 Lubiprostone 24 Mcg 2784 Lubiprostone 8 Mcg 2785 Lubiprostone 8 Mcg 2786 Lubricant 2787 Lubricant Jelly 30 Gms 2788 Luliconazole 2789 Lumitantrine 2790 Lutein Astaxanthin L-Gluthione 2791 Lutein, Betacarotene, Lycopene B 2792 Lycopene + Vit A + Tocophery Acetate 2793 Lycopene + Vitamin + Zinc 2794 Lycopene + Vitamin A, C, E 2795 Lycopene Beta Carotete Zinc Sulphate 2796 Lycopene Selenium Omega 3 Fatty Acid 2797 Lycopene Vitamin & Minerals 2798 Lycopene+Folic Acid+Vit.C+L-Carnitin 2799 Lymphocyte Immune Globulin 250 Mg 2800 Lynparza 150 Mg 2801 Lyphilized Peg Interferon Alfa 2B 2802 Lyproheptidex + Lysine 2803 Lysine Monohydrate 30Mg 2804 Macrogol 400 Mg 2805 Magnesium Sulphate 2806 Magnesium Sulphate 2807 Magnesium Sulphate 500Gm 2808 Magnesium Sulphate 75 Gm 2809 Magnesium Sulphate Inj. 2810 Mandelic Acid+Arbutin+Mag. Ascarbyl Phosphate 2811 Mannitol & Glycerine 100Ml 2812 Mannitol & Glycerine 300Ml 2813 Mannitol Iv 20% 100Ml 2814 Mannitol Iv 20% 250 Ml In Closed System 2815 Mannitol Iv 20% 350Ml 2816 Masalazine ( Liquid ) 1Gm / 100 Ml 2817 Mdi Spacers With Valve 2818 Measles Mumms And Rubella Vaccine ( Mmr ) 2819 Mebendazole 100Mg 2820 Mebeverine Hcl 135 Mg 2821 Mebeverine+Isabgol 2822 Meco+Dpenthol+Nicocinamide+V1b12 2823 Meco+Dpenthol+Nicocinamide+V1b12 2824 Mecobalamin 2825 Mecobalamin & Vitamin 2826 Mecobalamin 1 Ml 2827 Mecobalamin 1200 Mg 2828 Mecobalamin 1500Mcg+Ala 100Gm+Q -10 100Gm 2829 Mecobalamin Orally Disintegrating Strips 1500 Mcg 2830 Mecobalamin, Lycopane 2831 Mecobalamine + Beta Carotene Biotin Tocopherol& Vit.B Complex 2832 Mecobalamine + Beta Carotene Biotin Tocopherol& Vit.B Complex 2833 Mecobalamine With B-Complex 500 Mg 2834 Mecobalamine, Folic Acid, D-Alfa Tocopherol 2835 Meconazole 2836 Meconazole + Fluocinolone 10Gm 2837 Medium Chain Triglyceride 100 Ml 2838 Medium Chain Triglyceride 40 Gm 2839 Medoxyprogesterone 150Mg 2840 Medoxyprogesterone 150Mg 2841 Medoxyprogesterone 2.5 Mg 2842 Medoxyprogesterone 5 Mg 2843 Medroxy Progesteron 10Mg 2844 Mefenamic Acid + Dicyclomine 2845 Mefenamic Picosulphate 2846 Mefloquine 2847 Megastrol Acetate 160Mg 2848 Megastrol Acetate 40 Mg 2849 Megastrol Acetate 40Mg 2850 Melotonin 3 Mg 2851 Meloxicam 15Mg 2852 Meloxicam 30Mg 2853 Meloxicam 75Mg 2854 Melphalan 2Mg 2855 Melphalan 50Mg 2856 Memantine + Donepezil 2857 Memantine 10Mg 2858 Memantine Hydrochloride 10Mg 2859 Memantine Hydrochloride 5Mg 2860 Menadione Sulphate 10Mg 2861 Menadione Sulphate 1Ml 2862 Meninggoccal Polysach Vac 0.5Ml 2863 Menocycline 100 Mg 2864 Menocycline 100 Mg 2865 Menotrophin 2866 Menthol 55 Mg, Terpineol 120 Mg, Chlorothymol 5 Mg, Camphor 25 Mg, Eucalyptole 125 Mg 2867 Mephenteramine 10Ml 2868 Mephenteramine 2 Ml 2869 Mephenteramine 30 Mg 2870 Mercaptopurine 50Mg 2871 Mercaptopurine 50Mg 2872 Meropenam 1Gm 2873 Meropenam+Sulbactum 2874 Meropenem 250Mg 2875 Meropenem 500Mg 2876 Merothonab Cd-3 + Murine Monoclonel Antibody 5Mg 2877 Mesalamine 1.2 Gm 2878 Mesalamine Enema 2879 Mesalazine 2 Gm 2880 Mesalazine 500Mg 2881 Mesalazine Enema 1Gm / 100Ml 2882 Mesalazine Suppository 1 Gm 2883 Meslamine 1200Mg 2884 Meslamine 400Mg 2885 Meslamine 800Mg 2886 Meslamine Pallets 2887 Mesna 100Mg 2888 Mesna 200Mg 2889 Mesna 500 Mg 2890 Mesna 600Mg 2891 Metadoxine+Silymamarin+L-Ornithrine Aspirate+Pyridoxine Hydrochloride+Folic Acid 2892 Metaraminol 2893 Metformin 1000Mg 2894 Metformin 1000Mg Sr 2895 Metformin 500 Sr 2896 Metformin 500Mg 2897 Metformin 750 Mg 2898 Metformin 850 Mg Sr 2899 Metformin 850Mg 2900 Methaxalone 400Mg 2901 Methotrexate 1% 2902 Methotrexate 10 Mg 2903 Methotrexate 15Mg 2904 Methotrexate 15Mg 2905 Methotrexate 1Gm 2906 Methotrexate 2.5Mg Tab 2907 Methotrexate 20Mg 2908 Methotrexate 20Mg 2909 Methotrexate 25Mg 2910 Methotrexate 25Mg 2911 Methotrexate 500 Mg 2912 Methotrexate 50Mg / 2Ml 2913 Methotrexate 5Mg 2914 Methotrexate7.5Mg 2915 Methoxalen 10 Mg 2916 Methoxsalen 2917 Methoxy Plyeyhylene Glycol Epotien Beta 100 Mcg 2918 Methoxy Plyeyhylene Glycol Epotien Beta 50 Mcg 2919 Methoxy Plyeyhylene Glycol Epotien Beta 75 Mcg 2920 Methycobal+Spirulina+Vit A, B, C 2921 Methycobalamin + Vit+Niacinamide+Dpantheno 2922 Methycobalamin Benfottam 2923 Methycobalamin+Alpha Lopic Acid+Vitamins 2924 Methycobalamin+Spiroluna+Vit Abc 2925 Methycobalamine 1500 Mg + Pregabalamin 75 Mg Sr 2926 Methycobalamine+Ala+Befothim 2927 Methycobyl+Gabapantin+Alphalopic Acid 2928 Methyl Dopa 250 Mg 2929 Methyl Dopa 500 Mg 2930 Methyl Dopa I.P. 250Mg. 2931 Methyl Ergotamine 0.125 Mg 2932 Methyl Ergotamine 0.125 Mg 2933 Methyl Phenidate 18Mg 2934 Methyl Phenidate 36Mg 2935 Methyl Phenidate 54Mg 2936 Methyl Pred. Acetate 40Mg / Ml 2Ml 2937 Methyl Pred.Acetate 40Mg / Ml 1Ml 2938 Methyl Prednisolone 2939 Methyl Prednisolone 16 Mg 2940 Methyl Prednisolone 4Mg 2941 Methyl Prednisolone 8Mg 2942 Methyl Prednisolone Sod Succinate 125Mg 2943 Methyl Prednisolone Sod Succinate 1Gm 2944 Methyl Prednisolone Sod Succinate 500Mg 2945 Methyl Prednisolone Sod Succinate 60 Mg 2946 Methyl Prednisolone Succinate 100 Mg 2947 Methyl Prednisolone Succinate 40 Mg 2948 Methyl Prednisolone Succinate 80 Mg 2949 Methyl Salicylate + Menthol + Camphor + Eucayptus + Leorisan + Capsicum 2950 Methyl Salicylate + Menthol + Camphor + Eucayptus + Leorisan + Capsicum 2951 Methyl Salicylate + Menthol + Camphur 15Gm 2952 Methyl Xanthenes 2953 Methylcobal 500Mg + Vitamin E + Spiruline 2954 Methylcobalamin 1500 Mcg 2955 Methylcobalamin Cd 3 2956 Methylcobalamine 1500 Mcg + L-Methylfolate 1 Mg +Pyridoxal-5-Phosphate 0.5 Mg 2957 Methylcobalamine 500Mg 2958 Methylcobalamine 500Mg 2959 Metoclopramide 10Mg 2960 Metoclopramide Hcl 10Mg 2961 Metoclopramide Syrup 30Ml 2962 Metolazone 2.5 Mg 2963 Metolazone 2.5Mg 2964 Metolazone 5 Mg 2965 Metolazone 5Mg 2966 Metoprolol 100Mg Xr 2967 Metoprolol 12.5Mg 2968 Metoprolol 25 Mg 2969 Metoprolol 25Mg+Hydrochorhiazide 12.5 Mg 2970 Metoprolol 25Mg+Hydrochorhiazide 6.25Mg 2971 Metoprolol 50 Mg 2972 Metoprolol 50Mg+Hydrochorhiazide 12.5Mg 2973 Metoprolol 5Mg / Ml 5Ml 2974 Metoprolol Xr 25Mg 2975 Metoprolol Xr 50Mg 2976 Metronidazole 200 Mg 2977 Metronidazole 30Gm 2978 Metronidazole 400Mg 2979 Metronidazole 60Ml 2980 Metronidazole Iv 100Ml 2981 Mexiletine 100Mg 2982 Mexiletine 100Mg 2983 Mexiletine 200Mg 2984 Micafungin 100 Mg 2985 Micafungin 50 Mg 2986 Miconazole 2987 Miconazole 2988 Miconazole + Fluocinolone 10 Gm 2989 Miconazole Cream 2990 Miconazole / Eberaconazole Cream 2991 Micoonazole Nitrate Fluocinalone Aceto 2992 Microbar For Barium Enema 400Gm Disposable Kit 2993 Micronised Atorvastatin 10Mg 2994 Micronised Atorvastatin 20Mg 2995 Micronised Atorvastatin 40Mg 2996 Micronised Atorvastatin 80Mg 2997 Micronised Progesterone 200Mg 2998 Micronized Flavonoid 1000 2999 Micronized Probiota+Streptocos Facelias 3000 Micronized Purified Flavonoid Fraction 3001 Micronutrient 150 Ml 3002 Micronutrients 3003 Microspheres Of Dextronomer Deflux 3004 Midazolam 10Ml 3005 Midazolam 2Mg 3006 Midazolam 5Mg 3007 Midazolam 5Mg / 5Ml 3008 Midazolam Nasal Spray 3009 Midodrine 2.5Mg 3010 Mifeprine 200Mg ( 1 Tab ) +Minoprotos 200Mg ( 4Tab ) Kit 3011 Mifiprestone 200Mg 3012 Mild Endrin 3013 Milnacipran 25 Mg 3014 Milrinone Lactate 10Mg / 10Ml 3015 Mini Bag Plus Mate Kit 3016 Minixidil Topical 3017 Minocycline Hcl 100 Mg 3018 Minoxidil & Aminexil. 60 Ml 3019 Minoxidil + Finasteride Liquid 60 Ml 3020 Minoxidil + Tretinoin + Azelaic A Sol. 3021 Minoxidil 10 Mg 3022 Minoxidil 2% 3023 Minoxidil 5 Mg 3024 Minoxidil 5% Sol 3025 Minoxidil Topical 3% 60 Ml 3026 Minoxidil Topical Sol. 10% 60 Ml 3027 Minoxidil Topical Sol. 5% 150 Ml 3028 Minoxidil Topical Sol. 5% 60 Ml 3029 Minoxidil+Amnexidilloli 3030 Minoxidil+Amnexidilloli 10% 3031 Mirabegron 25 Mg 3032 Mirabegron 50 Mg 3033 Mirtazapine 15 Mg 3034 Mirtazapine 7.5 Mg 3035 Misoprostal 200Mg 3036 Misoprostol 100Mg 3037 Misoprostol 25Mg 3038 Misoprostol 50Mg 3039 Misoprostol 600Mg 3040 Misoprotal+Diclofenac ( 200+50 ) 3041 Mitomycin-C 10 Mg 3042 Mitoxantrone Inj. 10Ml 3043 Mizolastine 10 Mg 3044 Modified Fluid Gelatin 4% 3045 Modimed Cms 2.3%+Propylene Glycol 20% 3046 Moisol 2% Solution 3047 Mometasone 3048 Mometasone 3049 Mometasone + Clotrimazole 3050 Mometasone Furoate +Salicylic Acid 3051 Mometasone Furoate Cream 3052 Mometasone Furoate+ Terbinafine Cream 3053 Mometasone Xl 3054 Mometasone Xl 3055 Mometasone+Clotrimazole 3056 Monoclonal Anti Cd 20 3057 Monteluckast 10Mg+Bumbotrol 3058 Montelukast 10 + Levocetrizine 5 + Abroxol Hydrochloride 75 3059 Montelukast 10 Mg 3060 Montelukast 10 Mg + Levocetrizine 5 Mg 3061 Montelukast 10Mg + Desloratadine 5Mg 3062 Montelukast 5Mg 3063 Montelukast 5Mg+Levocetrizine 5 + Abroxol Hydrochloride 30 3064 Montelukast+Fexofenadine ( 10+120 ) 3065 Morphin 15Mg / Ml Preservative Free 3066 Morphine 10Mg 3067 Morphine 10Mg / Ml 3068 Morphine 20 Mg 3069 Morphine 20 Mg Sr 3070 Morphine 20 Mg Sr 3071 Morphine 30 Mg 3072 Morphine 30 Mg Sr 3073 Morphine Sulphate ( 10Mg / 2Ml ) 3074 Morphine Sulphate 60Mg 3075 Morphine Sulphate Sr 10Mg / Tab 3076 Morphine Sulphate Sr 20Mg / Tab 3077 Morphine Sulphate Sr 60Mg / Tab 3078 Moxifloc+Ketrolac 3079 Moxifloxacin & Dexamethasone 3080 Moxifloxacin 400Mg 3081 Moxifloxacin 400Mg 3082 Moxifloxacin 5 Ml 3083 Moxifloxacin+Prednisolone 3084 Moxinidine 0.2 Mg 3085 Moxinidine 0.3 Mg 3086 Moza Pride + Simethicon 3087 Moza Pride 5 Mg 3088 Multivitamin 3089 Multivitamin 10Ml 3090 Multivitamin Oral Drop 15Ml 3091 Multivitamin With 200 Mg Elemental Iron 3092 Multivitamin With Biotin 3093 Multivitamin With Vit. A 3094 Multivitamin With Zinc 3095 Multivitamin With Zinc 3096 Mupirocin Oint 5Gm 3097 Mupirocin+Fluticasone 3098 Mycophenolate Mofetil 3099 Mycophenolate Mofetil 250Mg 3100 Mycophenolate Mofetil 500Mg 3101 Mycophenolate Mofetil 750Mg 3102 Mycophenolate Sodium 180Mg 3103 Mycophenolate Sodium 360Mg 3104 N- Acetyl Cysteine Solution 2 Ml 3105 N- Acetyl Cysteine Solution 5Ml 3106 N Butyl 2-Cyanoacylate 0.5Ml 3107 N Butyl Cynoacrylate 1Ml 3108 N. Acetyl Cysteine 1000 Mg 3109 N. Acetyl Cysteine 300 Mg 3110 N. Acetyl Cysteine 600 Mg 3111 Na + Carboxy Methyl Cellulose 3112 Na Hyluronite 10Mg / Ml 3113 Nadifloxacin & Clobestal 3114 Nadifloxacin 1% 10Mg 3115 Nadifloxacin 1% Cream ( 100Mg ) 3116 Nadifloxacin 10Mg + Adapaline 1Mg 3117 Nalidixic Acid + Metro 60Ml 3118 Nalidixic Acid 30Ml 3119 Nalidixic Acid 500Mg ( Adult ) 3120 Nalidixic Acid+Metro.60Ml 3121 Naloxone 20 Mcg / Ml, 2Ml 3122 Naloxone 400Mcg / 1Ml 3123 Nandrolone Decanonate 25Mg 3124 Nandrolone Decanonate 50Mg 3125 Nandrolone Phenylpropionate 25Mg 3126 Nandrolone Phenylpropionate 50Mg 3127 Naphazoline + Chlorpheniramin 3128 Naproxen + Domparidon 250 Mg 3129 Naproxen + Domparidon 500 Mg 3130 Naproxen 250 Mg 3131 Naproxen 275 Mg 3132 Naproxen 500 Mg 3133 Naproxen 750 Mg 3134 Nardroline Decanoate 100Mg 3135 Nardroline Decanoate 25Mg 3136 Nardroline Decanoate 50Mg 3137 Natalizumab Iv 300 Mcg 3138 Nateglinate 60 Mg 3139 Nebihold + Hydro 3140 Nebiodol 5Mg Cilnidipine 10 Mg 3141 Nebivolol 3142 Nebivolol 2.5Mg 3143 Nebivolol 2.5Mg 3144 Nebivolol 5Mg 3145 Nebivolol 5Mg 3146 Nefromega 3147 Neomycin + Polymixin B + Hydrocortisone 3148 Neomycin+Polimilixin B + Hydrocartisone Powder 10Gm 3149 Neomycine 3150 Neosporin 3151 Neosporine + Hydrocartisone 3152 Neostigmine 15 Mg 3153 Neostigmine 2.5Mg / 5Ml 3154 Nepafenac 3155 Nephazolin+Tinolol Eye Drop 3156 Netilmicin 3157 Netilmicin 100Mg 3158 Netilmicin 10Mg 3159 Netilmicin 150Mg 3160 Netilmicin 200Mg 3161 Netilmicin 25Mg 3162 Netilmicin 300Mg 3163 Netilmicin 50Mg 3164 Nevirapine 200 Mg 3165 Nevirapine 50 Mg / 5Ml 3166 Nicorandal Iv 3167 Nicorandil 10Mg 3168 Nicorandil 2Mg 3169 Nicorandil 5Mg 3170 Nicorandil In Cold Chain Pouch 10Mg 3171 Nicorandil In Cold Chain Pouch 5Mg 3172 Nicorandil Od 10 Mg 3173 Nicotinamide 3174 Nicotinamide & D-Panthrnol Vita B1b6b12 3175 Nicotine Lozenges 3176 Nicotine Lozenges 2 Mg 3177 Nicotine Lozenges 3 Mg 3178 Nicotine Lozenges 4 Mg 3179 Nicotine Polacrilex 400Ml 3180 Nicoumalone 1Mg 3181 Nicoumalone 2Mg 3182 Nicoumalone 3 Mg 3183 Nicoumalone 4 Mg 3184 Nifedipine 10Mg 3185 Nifedipine 5Mg 3186 Nifedipine Retard 10Mg 3187 Nifedipine Retard 20Mg 3188 Nilotinib 150Mg 3189 Nilotinib 200 Mg 3190 Nilotinib 300Mg 3191 Nilutamide 150Mg 3192 Nimesulide & Tizanidine 3193 Nimesulide + Methyl Salicylate 30Gm Gel 3194 Nimesulide + Paracetamol 3195 Nimesulide 100Mg 3196 Nimesulide 200Mg 3197 Nimesulide Syrup 60Ml 3198 Nimesulide+Tizanidine 3199 Nimodipine 30Mg 3200 Nimodipine 50Ml 3201 Nimotuzumab - 50Mg 10Ml Vial 3202 Nintedanib Ethanesulphonate 100 Mg 3203 Nintedanib Ethanesulphonate 150 Mg 3204 Nitazoxanide 3205 Nitazoxanide 500 Mg 3206 Nitazoxanide Dt 3207 Nitrazepam 5Mg 3208 Nitrocontin 2.5Mg 3209 Nitrocontin 2.6Mg 3210 Nitrocontin 6.4Mg 3211 Nitrofuradantin 100Mg 3212 Nitrofuradantin 50Mg 3213 Nitrofurantoin 3214 Nitrofurantoin 100 Mg 3215 Nitroglcerin 6.5 Mg Cap 3216 Nitroglcerin Controlled Releae 3217 Nitroglycerin 0.2% 30Gm 3218 Nitroglycerine 3219 Nitroglycerine 3220 Nitroglycerine 25 Mg / 5Ml 3221 Nitroprusside ( 50Mg / Ml ) 3222 Nivolumab 100 Mg 3223 Nivolumab 40 Mg 3224 Noiethisterone 5Mg 3225 Noradrinalene 2Ml 3226 Norethindrone Acetate 3227 Norethisterone 3228 Norfloxacin 3229 Norfloxacin + Metronidazole 30Ml 3230 Norfloxacin + Tinidazole ( 400+600 ) Mg 3231 Norfloxacin 400Mg 3232 Norgestrel 0.5 Mg With Ethinyl Estrodiol 0.05 Mg 3233 Normal Saline 500Ml ( Should Be Sterilized At 121°C, Should Have Closure System, This Closure System Having Innovative Two-Parts, Should Meet Global Standards, Should Have Transparency As Glass Bottles ) 3234 Nystatin Ointment 3235 O.R.S 3236 O.R.S Low Osmolarity Containing 75 Mg Sodium And Glucose 37.5 Gm Each 3237 Obinutuzumab 3238 Octreotide 0.05Mg 3239 Octreotide 0.1Mg 3240 Octreotide Lar 10Mg 3241 Octreotide Lar 20Mg 3242 Octriotide Lar 30Mg 3243 Oestriol 15 Gm Cream 3244 Oestriol 30 Gm Cream 3245 Ofatumab 1000Mg 3246 Ofatumab 100Mg 3247 Ofloxacin + Metrogyl 3248 Ofloxacin + Ornidazole ( 200+500 ) 3249 Ofloxacin + Ornidazole 30 Ml 3250 Ofloxacin 100Mg / 5Ml 3251 Ofloxacin 200Mg 3252 Ofloxacin 400Mg 3253 Ofloxacin 800 Mg 3254 Ofloxacin Iv 100Ml 3255 Ofloxacin+Clotrimazole+Beclamethasone 3256 Oil And Water Soluble Vitamin 3257 Oil And Water Soluble Vitamin 3258 Oint. Teracrylume 3259 Olanzapine Tab. 10Mg 3260 Olanzapine Tab. 2.5Mg 3261 Olanzapine Tab. 5Mg 3262 Olanzapine Tab. 7.5Mg 3263 Olanzapine+Fluoxitine 3264 Olaparib 150 Mg 3265 Oleores In Capsicum Methyl 3266 Oleum Lini & Dic. Diethylammo 3267 Oleum Lini & Dic. Diethylammo 30Gm 3268 Olmesartan 10 Mg 3269 Olmesartan 20 Mg 3270 Olmesartan 20Mg + Ramipril 2.5Mg 3271 Olmesartan 20Mg + Ramipril 5Mg 3272 Olmesartan 20Mg+Amlodipine 5Mg All Strengths 3273 Olmesartan 20Mg+Metoprolol 25Mg All Strengths 3274 Olmesartan 20Mg+Metoprolol 50Mg All Strengths 3275 Olmesartan 40 Mg 3276 Olmesartan 40Mg+Amlodipine 5Mg All Strengths 3277 Olmesartan+Amlodipine+Hydrochlorothiazide All Strengths 3278 Olmesartan+Atenolol All Strengths 3279 Olmisartan 20 Mg + Hydrochloride 12.5 Mg 3280 Olmisartan 40 Mg + Hydrochloride 12.5 Mg 3281 Olmisartan+Chlorhalidone All Strengths 3282 Olnazapine 10 Mg 3283 Olnazapine 5 Mg 3284 Olopatadine 3285 Olopatadine Hydrochloride Solu. 3286 Olpatadine 0.1% / 0.2% 3287 Omalizumab 150Mg 3288 Omega 3 Fatty Acids+Antioxidants+Chromium+Vitamin C & E 3289 Omega-3 Marine Triglycerides With Ubidecarenone & Vitamin E 3290 Omeprazol+Tindiazole+Clarithromycin 3291 Omeprazol+Tindiazole+Clarithromycin ( Kit ) 3292 Omeprazole 3293 Omeprazole +Magnesium 3294 Omeprazole +Magnesium 3295 Omeprazole 10 Mg 3296 Omeprazole 20Mg 3297 Omeprazole 40Mg 3298 Omnesartan+Hydrochlorthazide 20Mg 3299 Omnesartan+Hydrochlorthazide 40Mg 3300 Ondencetron 3301 Ondencetron 4Mg 3302 Ondencetron 4Mg 3303 Ondencetron 8Mg 3304 Ondensetron 8Mg 3305 Oral Branched-Chain Amino Acids ( Bcaas ) , Should Contain L- Valine ( 1144 Mg ) , L-Isoleucine ( 952 Mg ) , L- Leucine ( 1904 Mg ) 3306 Oral Iron Drops 3307 Orceprenalin 10Mg 3308 Orciprenaline 3309 Orciprenaline 2Ml 3310 Oremeloxafene 3311 Organ Preservation Solution 1 Lit. 3312 Organ Preservation Solution 2 Lit. 3313 Orilistat 120 Mg 3314 Ornidazole 500Mg 3315 Ornidazole Fluconazole 3316 Ors Prolyte Powder 3317 Oseltamivir Phosphate 3318 Oseltamivir Phosphate 30 Mg 3319 Oseltamivir Phosphate 45 Mg 3320 Oseltamivir Phosphate 60 Mg 3321 Oseltamivir Phosphate 75 Mg 3322 Osimertinib 40 Mg 3323 Osimertinib 80 Mg 3324 Ostocal + Vitamin B12 ( Chewing Tablet ) 3325 Ostocalcium Chewable 3326 Otilonium Bromide 40 Mg Tab 3327 Oxaliplatin 100 Mg 3328 Oxaliplatin 50 Mg 3329 Oxalobacter+Lactobacillus+Bifidebacterium 3330 Oxazepam 15Mg 3331 Oxazepam 30Mg 3332 Oxcarbazepine 150 Mg 3333 Oxcarbazepine 300 Mg 3334 Oxcarbazepine 300 Mg / 5Ml 3335 Oxcarbazepine 450 Mg 3336 Oxcarbazepine 600 Mg 3337 Oxiconazole Gel 3338 Oxiconazole Nitrate 3339 Oxiconazole Nitrate 10Gm 3340 Oxybutynin 5Mg 3341 Oxybutynin Suspension 3342 Oxybutynin Tab 2.5 Mg 3343 Oxymetazoline 0.25% 3344 Oxymetazoline 0.5% 3345 Oxymetazoline Hcl 3346 Oxymetazoline Nasal Drop 0.05% 3347 Oxymetazoline Paed. Nasal Drop 0.025% 3348 Oxytocin 5Iu / 1Ml. 3349 Paclitaxel 100 Mg 3350 Paclitaxel 120 Mg 3351 Paclitaxel 200 Mg 3352 Paclitaxel 200 Mg 3353 Paclitaxel 250 Mg 3354 Paclitaxel 260 Mg 3355 Paclitaxel 30 Mg 3356 Paclitaxel 300 Mg 3357 Paclitaxel Inj. Concentrate For Nanodispersion 100 Mg 3358 Paclitaxel Inj. Concentrate For Nanodispersion 300 Mg ( Multidose ) 3359 Paclitaxel Usp 100Mg + Albumin Human Usp Approximately 900Mg 3360 Palbociclib 100 Mg 3361 Palbociclib 125 Mg 3362 Palbociclib 75 Mg 3363 Paliperidone 100Mg Inj. 3364 Paliperidone 150Mg Inj. 3365 Paliperidone 75Mg Inj. 3366 Palonosetron 0.25 Mg Iv 3367 Palonosetron 75Ugm 3368 Pamidronate Sod. 30Mg 3369 Pamidronate Sod. 60Mg 3370 Pamidronate Sod. 90Mg 3371 Panax Ginseng Extract Powder 42.5 Mg + ( Highly Concentrated, Standardized Ginseng Extract Corresponding To 212.5 Mg Of Root Of Panax Ginseng ) + L-Carnitine L-Tartrate Equivalent To L-Carnitine 175 Mg Cyanocobalamin 3372 Pancreatin 125Mg 3373 Pancreatin Mini Microspheres 25000 3374 Pancreatin Mini Microspheres 10000 3375 Pancuronium 4Mg / 2Ml 3376 Panitumumab 3377 Panobinastat 10 Mg 3378 Panobinastat 15 Mg 3379 Panobinastat 20 Mg 3380 Pantaprazole 20 Domperidon 10 3381 Pantaprazole 40+Levosulpride 25 Mg 3382 Pantaprazole Iv 40 Mg Inj. 3383 Pantoprazole 20 Mg 3384 Pantoprazole 20Mg 3385 Pantoprazole 40 Mg 3386 Pantoprazole 40 Mg + Cinitapride 3 Mg Sr 3387 Pantoprazole 40Mg 3388 Pantoprazole+Itopride 3389 Pantoprozole Sod. 40+ Domperidon 30 3390 Papavarin 2 Ml 3391 Paps Smear Kit 3392 Paracetamol I.V. 1Gm 3393 Paracetamol + Dicyclomine 3394 Paracetamol + Pentazocine ( 500 + 15 ) 3395 Paracetamol + Pseudoephedine 3396 Paracetamol + Pseudoephedine + Tripolide 3397 Paracetamol 125Mg 3398 Paracetamol 1Gm 3399 Paracetamol 250Mg 3400 Paracetamol 2Ml Im 3401 Paracetamol 2Ml Iv ( Intravenous ) 3402 Paracetamol 300Mg / 2Ml Iv 3403 Paracetamol 325+ Ibuprofen 400 3404 Paracetamol 500Mg 3405 Paracetamol 60Ml 3406 Paracetamol 650Mg 3407 Paracetamol 80Mg 3408 Paracetamol Analgin 0.375 3409 Paracetamol Ds 3410 Paracetamol I.V 100Ml 3411 Paracetamol In Normal Saline 100 Ml ( Closed System ) 3412 Paracetamol Infusion 100Mg ( Paracetamol With Cysteine & Mannitol In Glass Bottle 3413 Paracetamol Iv 3Ml / Amp 5 Ml ( Iv ) 3414 Paracetamol Pseudoephedrie Cpm Caffen 3415 Paracetamol Suppository 170 Mg 3416 Paracetamol+Domperidon 3417 Paracetamol+Phenylephrine + Chlorpheniramine 3418 Paracetamol+Phenylephrine+Chlorpheniramine 3419 Paracetamol+Psudo+Phenylepherine 3420 Paracetamol500mg / 5Ml ( Iv ) 3421 Paracetomol With Nimuslide 3422 Paracetomol With Tramodal 3423 Paradichlorobenzene + Benzocaine + Chlorbutol 3424 Paraldehyde 3425 Parecoxib Sodium 40Mg. 3426 Parenteral Nutrition Products ( All Types Of Lipids ) 3427 Parenteral Nutrition Products ( All Types Of Amino Acids ) 3428 Parenteral Nutrition Products ( All Types Of Dextrose ) 3429 Parenteral Nutrition Products ( All Types Of Dextrose , Amino Acids And Lipid Combinations ) 3430 Parenteral Nutrition Products ( All Types Of Dextrose And Amino Acids Combinations ) 3431 Parentral Nutrition Glutamine Dipeptide 100 Ml 3432 Parentral Nutrition Glutamine Dipeptide 50 Ml 3433 Parentral Nutrition Omega 3Fatty Acid 50Ml 3434 Paroxetin 12.5Mg 3435 Paroxetin 25Mg 3436 Part A Acid Concentrate 10Lt With Sodium + 103 3437 Part A Acid Concentrate 10Lt With Sodium + 103 H.D Fluid 3438 Pasireotide 0.3 Mg 3439 Pasireotide 0.6 Mg 3440 Pasireotide 0.9 Mg 3441 Patient Transfer Board 3442 Pazopanib Hcl 200 Mg 3443 Pazopanib Hcl 400 Mg 3444 Pazufloxacin Mesylate Iv 500Mg / 100Ml 3445 Pd Fluid 1.7% 1000Ml 3446 Pd Fluid 2 Ltr With Dextrose 4.25% 3447 Pd Fluid 2 Ltr. With 2.5% Dextrose 3448 Pd Fluid 2 Ltr. With Dextrose1.5% 3449 Pd Fluid 5 Ltr With 2.5% Dex 3450 Pd Fluid 5 Ltr With 4.25% Dex 3451 Pd Fluid 5Ltr. With 1.5% Dextrose 3452 Pd Fluid With 7.5% Lcodextrine For Long Dwell 2 Litre Bag 3453 Pegaptanib Sodium 3454 Peginterferon Alpha 2A 135Mcg 3455 Peginterferon Alpha 2A 180Mcg 3456 Pegleted Filgrastim 3457 Pegylated Erythropoetien 3458 Pegylated Interferon Alfa 2 B 100Mg 3459 Pegylated Interferon Alfa 2 B 120Mg 3460 Pegylated Interferon Alfa 2 B 50Mg 3461 Pegylated Interferon Alfa 2 B 80Mg 3462 Pegylated Interferon Beta 1A 125 Mcg 3463 Pembrolizumab 100 Mg 3464 Pembrolizumab 50 Mg 3465 Pemetrexed 250Mg 3466 Pemetrexed 500Mg 3467 Pencellamine 250Mg 3468 Pentazocine Hcl 30Mg / 1Ml 3469 Pentoxifylline 3470 Pentoxyphyline 400Mg 3471 Pentoxyphyline 400Mg 3472 Perampanel 2 Mg 3473 Perampanel 4 Mg 3474 Perampanel 6 Mg 3475 Perindopril + Hydrochlorthiazide All Strengths 3476 Perindopril 2 Mg 3477 Perindopril 4 Mg 3478 Perindopril 8 Mg 3479 Perindopril 8Mg+Indapamide 10 Mg 3480 Perindopril 8Mg+Indapamide 2.5 Mg 3481 Perindopril 8Mg+Indapamide 5 Mg 3482 Perindopril+Amlodipine ( 4+5Mg ) 3483 Perindopril+Amlodipine ( 8+10Mg ) 3484 Perindopril+Amlodipine ( 8+5Mg ) 3485 Perindopril+Losartan All Strengths 3486 Perineal Wash 3487 Permethrin 1% 3488 Permethrin 5% 3489 Permethrin Cream 5% 30 Gm 3490 Pertuzumab 420 Mg / 14Ml 3491 Pethdine 100Mg / 2Ml 3492 Pethidine Hcl 50Mg / Ml, 1Ml Ampoule 3493 Phenazopyridine 200 Mg 3494 Pheniramine 100 Ml 3495 Pheniramine 22.75Mg / Ml 2Ml 3496 Pheniramine Maleate 25Mg 3497 Pheniramine Maleate 50Mg 3498 Phenobanbiton+Phenytoin 3499 Phenobarbiton 2Ml 3500 Phenobarbitone 20Mg / 5Ml 3501 Phenobarbitone 30Mg 3502 Phenobarbitone 60Mg 3503 Phenoxy Benzamine Hcl 50 Mg 3504 Phenoxy Benzamine Hcl 50Mg 3505 Phention Sodium 3506 Phention Sodium 3507 Phention Sodium 100Mg 3508 Phention Sodium 300Mg 3509 Phention Sodium 50Mg 3510 Phentolamine 3511 Phentolamine 3512 Phenylephrine + Bromhexine 100 Ml 3513 Phenylephrine 10% 3514 Phenylephrine Hcl 10% 3515 Phenylephrine Hcl 10Mg 3516 Phenylephrine+Paracetamol 3517 Phenypherine Hcl + Chlorbutanol 3518 Phenytoin Sod. 100Mg / 2Ml 3519 Phenytoin Sodium 100Mg 3520 Phenytoin Sodium 100Ml 3521 Phosphorus Less Calorie Dense Protein Supplement For Ckdpatient ( Vit A & Vit K Free ) 3522 Phosphorus Less Calorie Dense Protein Supplement For Dialysis Patient ( Vit A & Vit K Free ) 3523 Phytomenadione 3524 Phytomenadione 3525 Pifloxacin 400Mg 3526 Pifloxacin 400Mg 3527 Pilocarpin 0.5% Drop 3528 Pilocarpin 2% ( 5Ml ) Drop 3529 Pilocarpin Hcl 5Mg 3530 Pilocarpin Nitrate 3531 Pilocarpine 2% 3532 Pilocarpine Intracameral 3533 Pilocarpine Nitrate 3534 Piludocane 3535 Pioglitazone + Metformin 15Mg 3536 Pioglitazone + Metformin 30Mg 3537 Pioglitazone Hcl 15Mg 3538 Pioglitazone Hcl 30Mg 3539 Piperacillin 125 / 500Mg 3540 Piperacillin+Clavulinic 3541 Piperazine 100 Mg 3542 Piprine 5Mg + Lycopene 10 Mg 3543 Piracetam 100Ml 3544 Piracetam 1200Mg 3545 Piracetam 15Ml 3546 Piracetam 400 Mg 3547 Piracetam 800Mg 3548 Pirfenidone 3549 Piribedil 50Mg 3550 Piroxicam 3551 Piroxicam 10Mg 3552 Piroxicam 20Mg. Dt. 3553 Piroxicam 40Mg 3554 Piroxicam 40Mg 3555 Piroxicam Oint. 3556 Pitavastatin Calcium 1 Mg 3557 Pitavastatin Calcium 1 Mg 3558 Placentax 20Gm Gel 3559 Placentax Extract 2Ml 3560 Plasma Lyte A 1000Ml 3561 Plasma Lyte A 500Ml 3562 Plasma Vol.Expander Hes 6% 500Ml 3563 Platelet Derived Growth Factor 15 Gm 3564 Platelet Derived Growth Factor 7.5Gm 3565 Plerixafor 20Mg / Ml 3566 Plus Permanent Pen 100 U 3567 Pneumococcal Conjugate Vaccine ( 10 Valent ) 3568 Pneumococcal Polysaccharide Conjugate Vaccine ( 13 Valent Absorbed ) 3569 Pneumococcal Polysaccharide Conjugate Vaccine ( 23 Valent Absorbed ) 3570 Podophyllin 3571 Policresulen+Cinchocaine Hcl 15Gm 3572 Policresulen+Cinchocaine Hcl 30Gm 3573 Polidocanol 3574 Polyantibiotic Resi. Bacilus Claussi 3575 Polyethelene Glycol 3350-17Gm 3576 Polyethylene Glycol 3350 And Elctrolyte 3577 Polyethylene Glycol With Electrolytes For Oral Solution 3578 Polyethylene Without Electrolytes For Oral Solution 3579 Polyhexanide 0.1%+Betaine Surf 0.1% Wound Irr Soln. 1000Ml 3580 Polyhexanide 0.1%+Betaine Surf 0.1% Wound Irr Soln. 350Ml 3581 Polyhexanide 0.1%+Betaine Surf 0.1% Wound Irr Soln. 40Ml 3582 Polymexin B 20 Mg 3583 Polymexin B 5 Mg 3584 Polymyxin B 3585 Polymyxin B + Neomycin + Bacitricin + Hydrocortisone 3586 Polymyxin B Sulphate 5, 00000 Units 3587 Polystyrene Sulphonate &Ca Salt 15Gm 3588 Polythylene Glycol 17 Gm 3589 Polyvinl Alcohol 3590 Polyviny + Povi+Chlor. Lubr 3591 Polyviny + Povidone 3592 Polyvinyl Polymer + Benzocaie+ Cetrimede+Propellent Solvent 3593 Pomalidomide 1 Mg 3594 Pomalidomide 2 Mg 3595 Pomalidomide 3 Mg 3596 Pomalidomide 4 Mg 3597 Posaconazole 3598 Posaconazole Inravenous 3599 Posaconazole Iv 300 Mg 3600 Potacium Iodine 3601 Potassium Chloride 10Ml 3602 Potassium Chloride 200Ml 3603 Potassium Citrate 450 & Citric Acid 200 3604 Potassium Citrate Citiric Acid 200 Ml 3605 Potassium Citrate Citiric Acid 450 Ml 3606 Potassium Magnesium Citrate 3607 Potassium Magnesium Citrate With Vit B6 Solution 200Ml 3608 Potassium Nitrate 5% Paste 3609 Potassium Permanganate Crystal 200Gm 3610 Potassium Permanganate Crystal 500Gm 3611 Potassium Phosphates 15 Ml 3612 Potassium Phosphates 15 Ml 3613 Pottasium Chloride 3614 Povidine - Iodine Gargle 3615 Povidine Iodine 3616 Povidine Iodine 5% 100 Ml 3617 Povidine Iodine 5% 15 Gm 3618 Povidine Iodine 5% 20 Gm 3619 Ppi 3620 Pralidoxime Iodide 500Mg 3621 Pramipex Er 0.125 Mg 3622 Pramipex Er 0.375 Mg 3623 Pramipex Er 0.75 Mg 3624 Pramipex Er 1.5 Mg 3625 Pramipexole 0.75 Mg 3626 Pramipexole 1.0 Sr 3627 Pramipexole 1.5Mg 3628 Pramipexole Hcl 0.5 Mg 3629 Pramiprax 0.125 3630 Pramiprax 0.25 3631 Pramiprax 0.5 3632 Pramiprax 1.0 3633 Prasugrel 10 Mg 3634 Prasugrel 5Mg 3635 Pravastatin Sodium 20Mg 3636 Prazosin 1Mg 3637 Prazosin 2.5Mg 3638 Prazosin 5Mg 3639 Prazosin Gits 2.5Mg 3640 Prazosin Gits 5Mg 3641 Prazosin Hcl 5 Mg 3642 Prazosin Xl All Strengths 3643 Prebiotic + Probiotic 3644 Predinosolone 3645 Prednisolone 3646 Prednisolone + Ofloxacin 3647 Prednisolone 10Mg 3648 Prednisolone 2.5Mg 3649 Prednisolone 20Mg 3650 Prednisolone 40 Mg 3651 Prednisolone 5Mg 3652 Prednisolone Forte 3653 Pregabalin 100 Mg Extend Relise 3654 Pregabalin 150 Mg 3655 Pregabalin 150 Mg Extend Relise 3656 Pregabalin 50 Mg Extend Relise 3657 Pregabalin 75 Mg 3658 Pregabalin 75 Mg Extend Relise 3659 Pregabalin 75Mg + Methylcobalamin 750 Mcg 3660 Pregabalin Methylcobalamin B6 Folic Acid 3661 Pregabalin With Nortryptillyne 75Mg + 10 Mg 3662 Pregabolin 100 Mg 3663 Pregabolin 50 Mg 3664 Pregabolin Xr 150 Mg 3665 Prilocaine + Lignocaine Local Anesthetic Cream 3666 Prilomine+Lignocaine 3667 Primaquine 7.5Mg 3668 Primidone 250 Mg 3669 Primosa 1 Gm 3670 Pro Paracaine Hcl 3671 Probiotic 90 Billion Cfl 3672 Probiotic Lactobacilus 3673 Probiotic Lactobacilus 3674 Probiotic Saccharomyces Boulardii 3675 Probiotics With Melatonin 3676 Procainamide 250Mg 3677 Procainamide All Strengths 3678 Procapil + Vit. E + Polyquaterium 100 Ml 3679 Procarbazine 50 Mg 3680 Prochlorperazine 5Mg + Dimenhydrinate 40Mg 3681 Prochlorperazine Mesylate 3682 Prochlorperazine Mesylate 5 Mg Dispersable 3683 Proctoclysis Enema 100 Ml 3684 Proctosedyl Ointment 3685 Progesteron 100 Mg 3686 Progesteron 200 Mg 3687 Progesteron 400 Mg 3688 Progesterone 1% 3689 Progesterone 100 Mg 3690 Progesterone 200 Mg 3691 Progestorone Soft Gelatin 1% 3692 Progestorone Soft Gelatin 100Mg 3693 Progestorone Soft Gelatin 100Mg 3694 Progestorone Soft Gelatin 200Mg 3695 Progestorone Soft Gelatin 200Mg 3696 Prolifloxacin 3697 Prolonged Release Venlafaxine Cap 3698 Promethazine 125 Ml 3699 Promethazine 25Mg. 3700 Promethazine 50Mg / 2Ml 3701 Propafenone 3702 Propafenone 150Mg 3703 Propanol ( Long Acting ) 40 Mg 3704 Propantheline Bromide 3705 Proparacaine 3706 Propofal 1% 20Ml In Edta 3707 Propofal 1% 50Ml In Edta 3708 Propofol 1% 20Ml 3709 Propofol 1% 50Ml 3710 Propofol 2% 25Ml 3711 Propofol 2% 50Ml 3712 Propranolol 10Mg 3713 Propranolol 20 Mg 3714 Propranolol 20Mg Er 3715 Propranolol 4 Mg 3716 Propranolol 40Mg 3717 Propranolol 40Mg Er 3718 Propranolol Hcl 40 Mg 3719 Propsalic Lotion 50 Ml 3720 Propylene Glycol Cream 100Gm 3721 Propylene Glycol, Diazolidinyl Urea 3722 Prostaglandin 3723 Prostaglandin E1 ( 500 Microgram / Ml ) 3724 Prostidin 125Mg 3725 Prostidin 250Mg 3726 Protamine Sulphate 50Mg / 5Ml 3727 Protein Granules Tin 200Gm 3728 Protein Predigestive B-4 3729 Protein+Zinc+Reboflamin+D-Pantethenol+Naicinaucle 3730 Prothiaden ( 25Mg ) 3731 Prothiaden ( 75Mg ) 3732 Prothionamide 250 Mg Tab 3733 Prulifloxacin 600Mg 3734 Pseudoephedrin & Chlorpheniramine 3735 Pseudoephedrin & Chlorpheniramine 3736 Pseudoephedrin & Chlorpheniramine T 3737 Pure Mct Powder 3738 Pyrazinamide 3739 Pyrazinamide 1.5Gm 3740 Pyrazinamide 1000 Mg 3741 Pyrazinamide 500Mg 3742 Pyrazinamide 750Mg 3743 Pyridostigmine 60 Mg 3744 Pyridostigmine Er 120 Mg 3745 Pyridostigmine Er 180 Mg 3746 Pyridostigmine Er 180 Mg 3747 Pyridoxine ( 50Mg / Ml ) 3748 Pyridoxine 100Mg 3749 Pyridoxine 10Mg 3750 Pyridoxine 40Mg 3751 Pyridoxine+ Nicotinamide+ Vit B12 + Folic Acid + Zinc Sulphate + Felectati + Calcium Gluconate 3752 Pyridoxine+ Nicotinamide+ Vit B12 + Folic Acid + Zinc Sulphate + Felectati + Calcium Gluconate 3753 Pyrimethamin + Sulphadoxin 3754 Pyrimethamine 25Mg 3755 Pyritinol Dihydrochloride 200Mg 3756 Pzide 1000 Mg 3757 Pzide 500 Mg 3758 Quetiapin Xr 100Mg 3759 Quetiapin Xr 50Mg 3760 Quetiapine 25 Mg 3761 Quetiapine 50 Mg 3762 Quetiapine Fumarate 100 Mg 3763 Quetiapine Fumarate 200 Mg Sustained Release 3764 Quetiapine Fumarate 300 Mg Sustained Release 3765 Quinapril 20Mg 3766 Quinine Dihydrochloride 3767 Quinine Sulphate 300Mg 3768 Rabeprazole 3769 Rabeprazole & Levossulpride 3770 Rabeprazole + Itopride 3771 Rabeprazole + Mosapride 3772 Rabeprazole 20Mg 3773 Rabeprazole Sodium 20Mg + Levosulpride 75 3774 Rabeprazole+Domperidon 3775 Racecadotril 100 Mg 3776 Racecadotril 30 Mg 3777 Racecadotril 30 Mg 3778 Raloxifene 60Mg 3779 Ramicizumab 100 Mg 3780 Ramicizumab 500 Mg 3781 Ramipril 1.25 Mg 3782 Ramipril 10Mg 3783 Ramipril 2.5 Mg 3784 Ramipril 2.5Mg + Hydrochorhiazide 12.5 Mg 3785 Ramipril 2.5Mg+Metoprolol 25Mg 3786 Ramipril 5 Mg 3787 Ramipril 5 Mg + Hydrochlorthiazide 3788 Ramipril 5Mg+Metoprolol 50Mg 3789 Ramosetron 1 3790 Ramosetron 2 3791 Ramosetron 3 3792 Ramosetron 5 Mcg 3793 Ramosetron Hcl 3Mg 3794 Ranibizumab 3795 Ranitidine 3796 Ranitidine ( 25Mg / Ml ) 3797 Ranitidine 100Mg / 2Ml 3798 Ranitidine 150Mg 3799 Ranitidine 300Mg 3800 Ranitidine Effervescet 150 Mg 3801 Ranitidine Effervescet 300 Mg 3802 Ranolazine 1000 Mg 3803 Ranolazine 500 Mg 3804 Rantidine With Domperidone 3805 Rapamycine 3806 Rapamycine 3807 Rasageline 0.5Mg 3808 Rasageline 1Mg 3809 Rasburicase 1.5 Mg 3810 Rasburicase 60Mg 3811 R-Cin ( 450 ) + Inh ( 300 ) + Ethambutol ( 800 ) + Pyrazinamide ( 1500 ) ( Kit ) 3812 R-Cinex Kid 150+Inh 100 3813 Ready To Hang Liquid Enteral Feed ( Peptide Based ) 1000 Ml 3814 Ready To Hang Liquid Enteral Feed 500 Ml 3815 Recombinant Factor Ix 3816 Recombinant Factor Vii 3817 Recombinant Factor Viii 3818 Recombinant Follitropin Beta 3819 Recombinant Human Follicle Stimulating Hormone 300 Iu 3820 Recombinant Human Follicle Stimulating Hormone 150 Iu 3821 Recombinant Human Follicle Stimulating Hormone 225 Iu 3822 Recombinant Human Follicle Stimulating Hormone 75 Iu 3823 Recombinant Human Interferon Beta 1A 30Mcg, 0.5Ml Pf Pen 3824 Recombinant Human Tissue Type – Plasminogen Activator 20Mg 3825 Recombinant Tissue Plasminogen Activator ( Rtpa ) 100 Mg 3826 Recombinant Tissue Plasminogen Activator ( Rtpa ) 50 Mg 3827 Recombinant Tissue Plasminogen Activator 18 Mg 3828 Recomibinant Follicle Stimulating Harmone 1200Iu 3829 Reduced Glutathione 250Mg 3830 Reduced Glutathione 50Mg 3831 Reo Phos 35 Mg 3832 Repaglinide 0.5Mg 3833 Repaglinide 1 Mg 3834 Residronate 35 Mg 3835 Resperidone 2 Mg 3836 Reteplase 10 Iu 3837 Reverse Tissue Plasminogen Activator ( Rtpa ) 3838 Revolac 25 Mg 3839 Ribavirin 200Mg 3840 Ribociclib 200 Mg 3841 Riboflavin 20 Mg 3842 Rifabutin 150Mg 3843 Rifampcin Syp.All Strength 3844 Rifampcin +Inh +Ethambutol ( 450+300+800 ) 3845 Rifampcin +Isoniazode 100+50Mg 3846 Rifampcin 100 Ml 3847 Rifampcin 150 Ml 3848 Rifampcin 150Mg 3849 Rifampcin 200Mg 3850 Rifampcin 300 Ml 3851 Rifampcin 400 Ml 3852 Rifampcin 50Mg 3853 Rifampcin 600Mg 3854 Rifampcin100mg 3855 Rifampicin + Isoniazed ( 450+300 ) 3856 Rifampicin + Isoniazed ( 600+300 ) 3857 Rifampicin 300Mg Tab. 3858 Rifampicin 450Mg Cap 3859 Rifampicin+Ethambutol+Isoniazid + Pyrazinamide 3860 Rifaximine 3861 Rifaximine 200Mg 3862 Rifaximine 400Mg 3863 Rifaximine 550Mg 3864 Ringer Lactate 500 Ml ( Should Be Sterilized At 121°C, Should Have Closure System, This Closure System Having Innovative Two-Parts, Should Meet Global Standards, Should Have Transparency As Glass Bottles ) 3865 Risedronate 35Mg 3866 Risperidone 1Mg 3867 Risperidone 2Mg 3868 Risperidone 3Mg 3869 Risperidone 4Mg 3870 Risperidone Prolonged Release Suspension 25Mg 3871 Risperidone Prolonged Release Suspension 37.5Mg 3872 Risperidone Prolonged Release Suspension 50Mg 3873 Rituximab 1000Mg 3874 Rituximab 100Mg 3875 Rituximab 500Mg 3876 Rivaroxaban 3877 Rivaroxaban 3878 Rivastigmine 1.5 Mg 3879 Rivastigmine 3 Mg 3880 Rivastigmine 4.5 Mg 3881 Rivastigmine Transdermal Patch 3882 Rivoroxaban 20Mg 3883 Rizatriptan 10 Mg 3884 Rocuronium Bromide 50Mg 3885 Roficoxib 12.5Mg 3886 Roficoxib 25Mg 3887 Roficoxib 50Mg 3888 Roflumilast 3889 Ropinirole Hcl 0.25Mg 3890 Ropinirole Hcl 0.5Mg 3891 Ropinirole Hcl 1Mg 3892 Ropinirole Hcl Er 0.5Mg 3893 Ropinirole Hcl Er 1Mg 3894 Ropinirole Hcl Er 2Mg 3895 Ropinirole Hcl Er 3Mg 3896 Ropivacaine 0.2% 3897 Ropivacaine 0.5% 3898 Ropivacaine 0.75% 3899 Ropivacaine 1%, 10Ml 3900 Rosiglitazone & Metformin 4Mg 3901 Rosiglitazone 4Mg 3902 Rosovastatin 10+Aspirin 150Mg 3903 Rosovastatin 20+Aspirin 75Mg 3904 Rosuvastatin 10Mg 3905 Rosuvastatin 10Mg + Aspirin 75Mg 3906 Rosuvastatin 10Mg + Fenofibrate 145Mg 3907 Rosuvastatin 10Mg + Fenofibrate 160Mg 3908 Rosuvastatin 10Mg + Fenofibrate 67.5Mg 3909 Rosuvastatin 20Mg 3910 Rosuvastatin 20Mg + Aspirin 150Mg 3911 Rosuvastatin 40Mg 3912 Rosuvastatin 5 Mg + Fenofibrate Ip 145 Mg 3913 Rosuvastatin 5Mg 3914 Rosuvastatine 75 3915 Rotacap Budesonide 200 Mcg 3916 Rotacap Fluticasone 250 Mcg 3917 Rotacap Fluticasone 50 Mcg 3918 Rotacap Ipratropium Bromide 3919 Rotacap Salbutamol 3920 Rotacap Salbutamol+Baclomethasone 3921 Rotacap Salmeterol + Fluticasone 3922 Rotacap Tiotropium Bromide 18Mcg 3923 Rotahaler Machine 3924 Rotavirus Pentavalent Vaccine 3925 Rotavirus Vaccine, Live, Oral, ( Rv-1 ) 3926 Rotavirus Vaccine, Live, Oral, Pentavalent, ( Rv-5 ) 3927 Roxatidine 75Mg 3928 Roxithromycin 150Mg 3929 Roxithromycin 30Ml 3930 Roxithromycin 50Mg 3931 Roxithromycin 75Mg 3932 Rupatidine 10Mg 3933 Rutacea 500Mg 3934 Ruxolitinib 3935 Ruxolitinib 15Mg 3936 Ruxolitinib 20Mg 3937 Ruxolitinib 5Mg 3938 S ( - ) Metoprolol Tartrate 25 Mg + Telmisartan 20 Mg 3939 S ( - ) Metoprolol Tartrate 25 Mg + Telmisartan 40 Mg 3940 S ( - ) Pantoprazole 20 Mg 3941 S ( - ) Amlodipine 2.5 Mg Telmisartan 40 Mg 3942 S ( - ) Metoprolol Succinate 23.75 Mg Equivalent To S ( - ) Metoprolol Tartrate 25 Mg 3943 S ( - ) Metoprolol Succinate 23.75 Mg Eq. To S ( - ) Metoprolol Tartrate 25 Mg ( Extended Release ) S ( - ) Amlodipine Besilate Eq. To S ( - ) Amlodipine 2.5 Mg. 3944 S ( - ) Metoprolol Tartrate 25 Mg ( Extended Release ) S ( - ) Amlodipine Besilate Eq. To S ( - ) Amlodipine 5 Mg. 3945 Saccharomyces Boulardi 3946 Saccharomyces Boulardi 250 Mg 3947 Sacubitril / Valsartan 100 Mg 3948 Sacubitril / Valsartan 200 Mg 3949 Sacubitril / Valsartan 50 Mg 3950 S-Adenosyl Methionim 200Mg 3951 S-Adenosyl Methionim 400Mg 3952 Salbutamol 3953 Salbutamol 3954 Salbutamol + Fluoxetine 3955 Salbutamol + Fluoxetine 3956 Salbutamol 2Mg 3957 Salbutamol 4Mg 3958 Salbutamol And Ipratopium Bromide Respules 3959 Salbutamol Plain 100Ml 3960 Salbutamol Resp. Soln. 3Mg / 15Ml 3961 Salbutamol Solution 0.5% ( 5Mg / Ml ) 3962 Salfasalazine 1000Mg 3963 Salfasalazine 500Mg 3964 Salicylic Acid 12% 3965 Salicylic Acid 6% 3966 Salicylic Acid Lotion 3967 Saline Nasal Drops 3968 Saline Nasal Spray 3969 Saliva Supplement Mouth Spray 50Ml 3970 Salmeterol And Fluticasone Propionate Hfa 3971 Salmeterol Plain Mdi 3972 Salmetrol 200 Meter Dose 3973 Salmetrol+Fluticasone 250 Mcg 3974 S-Amlodipine 2.5 Mg + Olmesartan Medoxomil 20 Mg + Hydrochlorothiazide 12.5 Mg 3975 S-Amlodipine 2.50 Mg , Losartan 50 Mg 3976 S-Amlodipine 2.50 Mg, Atenelol 50 Mg 3977 S-Amlodipine 2.50 Mg. Hydrochlorothiazide 12.50 Mg 3978 S-Amlodipine 5 Mg Hydrochloridethiazide 12.50 Mg 3979 S-Amlodipine Beselate 10 Mg 3980 S-Amlodipine Beselate 2.5 Mg 3981 S-Amlodipine Beselate 5 Mg 3982 Sargramostim 250Mcg 3983 Sargramostim 500Mcg 3984 Saxagliptin 2.5 Mg 3985 Saxagliptin 5 Mg 3986 Saxagliptin 5Mg+Metformin 1000Mg 3987 Saxagliptin 5Mg+Metformin 500Mg 3988 Saxagliptin Metformin Hcl Exte. Rele. 3989 Secnidazole 1Gm Tab. 3990 Secukinumab 150 Mg 3991 Selenium Sulphide Sol. 3992 Semi Elemental Enteral Formula ( Pure Semi Elemental, Iso-Osmolar, Fda Approved Formula For Infants And Older Children ) 3993 Senasof 3994 Senna Glucoside 3995 Sensitive Teeth Cavity Prevention 3996 Seratopeptidase 10 Mg 3997 Serr Pep 10Mg + Diclofenac Pot 50Mg 3998 Sertoconazole Nitrate 3999 Sertraline 100 Mg 4000 Sertraline 25 Mg 4001 Sertraline 50 Mg 4002 Sertraline Hcl 50Mg 4003 S-Etodolac Mg 200+Paracetamol 325Mg 4004 Sevelamer Bicarbonate 400Mg 4005 Sevelamer Bicarbonate 800Mg 4006 Sevelamer Carbonate 400Mg Dispersible Tablet 4007 Sevelamer Carbonate 800Mg Dispersible Tablet 4008 Sevelamer Carbonate Powder For Oral Suspension 800Mg 4009 Sevelamer Hcl 400Mg 4010 Sevelamer Hcl 800 Mg 4011 Sevelmer Carbonate 400 Mg 4012 Sevelmer Carbonate 800 Mg 4013 Sevoflurane Wet Formulation 4014 Sibutramin 10Mg 4015 Sibutramin 15Mg 4016 Silbyon Phospholipid 4017 Sildenafil 100 Mg 4018 Sildenafil 20 Mg 4019 Sildenafil 25 Mg 4020 Sildenafil 50 Mg 4021 Sildenaphil I.V. 4022 Silicone Anti Scar Gel 4023 Silodosin 4 Mg 4024 Silodosin 8 Mg 4025 Silodosin 8 Mg + Dutasteride 0.5 Mg 4026 Silver Sulphadiagene Cream 15 Gm 4027 Silver Sulphadiagene Cream 250 Gm 4028 Silver Sulphadiagene Cream 30 Gm 4029 Silver Sulphadiagene Cream 500 Gm 4030 Simthicone & Activated Charcoal 4031 Simvastatin 10Mg 4032 Simvastatin 20Mg 4033 Simvastatin 5Mg 4034 Sirolimus 1Mg 4035 Sirolimus Susp 4036 Sitagliptin 100 Mg + Metformin 1000 Mg 4037 Sitagliptin 100Mg 4038 Sitagliptin 250Mg 4039 Sitagliptin 25Mg 4040 Sitagliptin 50 Mg + Metformin 500 Mg 4041 Sitagliptin 50Mg 4042 Sitagliptin Phosphate 100 Mg + Metformin 1000 Mg 4043 Sitagliptin Phosphate 50 Met. Hydro 1000 Mg 4044 Skin Lightening Cream 20 Gm 4045 Sod. Chloride 4046 Sod. Monofluoro Phosphate 4047 Sod. Monofluoro Phosphate 4048 Sod.Monofluorophoephate+Zinc Sulphate+Aluminium 4049 Soda Lime Granules 5 Kg 4050 Sodium Acid Phosphate 250 Mg 4051 Sodium Acid Phosphate Anhydrous 1.936 G Providing Elemental Phosphorus 500 Mg 4052 Sodium Benzoate 20 G 4053 Sodium Bicarboante 1000 Mg 300 Ml 4054 Sodium Bicarbonate 4055 Sodium Bicarbonate 1000 Mg 4056 Sodium Bicarbonate 500 Mg 4057 Sodium Bicarbonate -Snap Off Ampoule 25Ml 4058 Sodium Carboxymethylcellulose ( Lubricant-0.5% ) 4059 Sodium Chloride 4060 Sodium Chloride 4061 Sodium Chloride 4062 Sodium Chloride 4063 Sodium Chloride 4064 Sodium Chloride .45% Without Dextrose 2 Ltr 4065 Sodium Chloride 3% 4066 Sodium Chloride Opthalmic Oint 4067 Sodium Chloride.45% Without Dextrose - 2 Ltr 4068 Sodium Cromoglicate 4069 Sodium Cromolyn 4070 Sodium Ferric Gluconat 62.5 Mg 4071 Sodium Flucidate 4072 Sodium Flucidate 4073 Sodium Fluorescein 4074 Sodium Fluoride 4075 Sodium Fusidate 20Gm 4076 Sodium Hyaluminate + Chandrontin Sulphate 4077 Sodium Hyaluminate + Chandrontin Sulphate 4078 Sodium Hyalunate: 0.1% Preservative Free With Comode 4079 Sodium Hyaluronate + Chondritin Sulphate 4080 Sodium Hyaluronate Solution 14 Mg ( Sterile ) 4081 Sodium Hyaluronate, Pre-Filled Syringe:20Mg / 2 Ml Pfs 4082 Sodium Hyaluronate, Pre-Filled Syringe:25Mg / 2.5 Ml Pfs 4083 Sodium Hyduronate 4084 Sodium Hypochloride 5 Lit 4085 Sodium Monofluoro Phosphate 4086 Sodium Monofluoro Phosphate 4087 Sodium Monofluorophoephate+Zinc+Alum 4088 Sodium Nitropruside 50Mg 4089 Sodium Pentason Polysulphonate 4090 Sodium Phenyl Butyrate 4091 Sodium Sulphate Bowl Preparation Sol. 4092 Sodium Pico Sulphate 100 Ml 4093 Sodium Pico Sulphate 10Mg 4094 Sodium Tetra Decyl Sulphate 2Ml 4095 Sodium Valporat + Valproicacid 200Mg Cr 4096 Sodium Valporat + Valproicacid 500Mg Cr 4097 Sodium Valporate 100Ml 4098 Sodium Valporate 200 Mg 4099 Sodium Valporate 300Mg 4100 Sodium Valporate 500 Mg 4101 Sodium Valporate Inj. 100Mg / Ml 5Ml 4102 Sodium Valporate+Valporic Acid 300Mg Cr 4103 Sofosbuvir 400 Mg 4104 Sofosbuvir 400 Mg + Velpatasvir 100 Mg 4105 Softgel Cap Of Omega 3 Fatty Acid 4106 Solefenacin 10Mg 4107 Solefenacin 5Mg 4108 Solifenacin Succinate 5Mg 4109 Solution For Haemo Filteration & Hemo Dialysis 5 Ltr 4110 Solvent Ether 500Ml 4111 Somatostatin 3 Mg 4112 Sorafinib 200Mg 4113 Sorafinib 50Mg 4114 Sotalol 20Mg 4115 Sotalol 40Mg 4116 Sotalol 80Mg 4117 Spacer For Metered Dose Inhaler 4118 S-Pantoprazole 20Mg+Domperidone ( Sr ) 30Mg 4119 Sparfloxacin 4120 Sparfloxacin 200 Mg 4121 Special Nutritional Preparation With Immuno-Modulatory Properties ( All Types, Concentrations And Volumes Should Be Quoted ) 4122 Special Wound Care Products With Growth Factors ( All Types, Exact Chemical Composition, Concentrations And Pack Volumes To Be Quoted ) 4123 Specific Dose Multivitamins 4124 Specific Dose Multivitamins 4125 Specific Dose Multivitamins 4126 Spirinolactone 100Mg 4127 Spirinolactone 25Mg 4128 Spirinolactone 50Mg 4129 Spirit Surgical 100Ml 4130 Spirit Surgical 500Ml 4131 Squalene, Aloevera & Vitamin 4132 Stanozolal 2Mg 4133 Sterile Opthalmic Irrigation 4134 Streptococcus Faecallis+Lactobacillus Sporogenes 4135 Streptokinase 15Lac Unit 4136 Streptokinase 7.5Lac Unit 4137 Streptomycin 1 Gm 4138 Streptomycin 750Mg 4139 Succinylcholine 100 / 2Ml 4140 Succinylcholine 10Ml 4141 Sucralfate 4142 Sucralfate 4143 Sucralfate 1Gm 4144 Sucralfate Susp. 100Ml 4145 Sucralfate Suspension 200Ml 4146 Sucralfate+Oxethazaine 4147 Sufentanil Citrate Inj 50Mcg / Ml 1Ml 4148 Sulbactum + Ampicillin 375 Mg 4149 Sulbactum + Ampicillin 500 Mg 4150 Sulbactum + Ampicilline 1.5Gm 4151 Sulbactum + Cefoperazone 1Gm 4152 Sulbactum 1Gm / 2Gm 4153 Sulbactum+Cefoparazone 2Gm 4154 Sulfamethizole+Trimethoprim 4155 Sulfamethizole+Trimethoprim 4156 Sulfasalazine 500 Mg 4157 Sulphacetamide 4158 Sulphamethoxazole+Trimethaprim 800+160 4159 Sulphamethoxazole+Trimethaprim 800+160 ( 60 Ml ) 4160 Sulphasalazine 1000 Mg 4161 Sumatriptan Succinate 50Mg 4162 Sun Screen Lotion 50 4163 Sun Screen Lotion 50 4164 Sunitinib 25Mg 4165 Sunitinib 12.5Mg 4166 Sunitinib 37.5Mg 4167 Sunitinib 50Mg 4168 Sunscreen Lotion 30 4169 Sunscreen Oint 30 4170 Superoxide Solution 4171 Superoxidized Solution 100 Ml 4172 Surfactant Porcine Minced 1.5 Ml 4173 Surfactant, Bovine Lavage, 3Ml 4174 Surfactant, Bovine Lavage, 5Ml 4175 Surfactant, Bovine Minced, 4Ml 4176 Surfactant, Bovine Minced, 8Ml 4177 Surfactant, Porcine Minced, 1.5Ml 4178 Surgical Sealant 2Ml 4179 Surgical Sealant 4Mg 4180 Sustained Release Recombinant Human Growth Hormone, 24Mg / Vial 4181 Tablets Of Morphine Sulphate 10 Mg C.R. 4182 Taclstasvir 60 Mg 4183 Tacrolimus 0.1% 4184 Tacrolimus 0.25Mg 4185 Tacrolimus 0.5 Mg 4186 Tacrolimus 0.5 Mg P.R. 4187 Tacrolimus 1 Mg P.R. 4188 Tacrolimus 1.0 Mg 4189 Tacrolimus 2 Mg 4190 Tacrolimus 3 Mg P.R. 4191 Tacrolimus 5 Mg P.R. 4192 Tacrolimus 5.0 Mg 4193 Tacrolimus Iv 4194 Tacrolimus Oint 0.03% W / W 4195 Tadalanafil 10Mg 4196 Tadalanafil 20Mg 4197 Tamoxifen 10 Mg 4198 Tamoxifen Citrate Tab 20 Mg 4199 Tamsulosin 0.2 4200 Tamsulosin Hcl 0.4Mg 4201 Tamsulosin+Dutasteride 4202 Tamsulosin+Finasterid 4203 Taurine 500 Mg + Acetylcysteine 150 Mg 4204 Taurolock Cyclotaurolidine + Citrate 4% - 4 Ml 4205 Taurolock Cyclotaurolidine + Citrate 4% - 8 Ml 4206 Taurolock Hep - 100 Iu / Ml 4207 Taurolock Hep - 500 Iu / Ml 4208 Tazobactum+Piperacillin 1.125Gm 4209 Tazobactum+Piperacillin 2.250Gm 4210 Tazobactum+Piperacillin 4.5Gm 4211 Td ( Tetanus Diptheria ) Vaccine 4212 Tegafur 100 Mg / Uracil 224 Mg 4213 Teicoplanin 200Mg 4214 Teicoplanin 400Mg 4215 Telavancin 4216 Telbivudine 600 Mg 4217 Telmesartan + Cinidepin 4218 Telmisartan 40 Mg + Hydrochlorthiazide 12.5 Mg 4219 Telmisartan 40Mg+Amlodipine 2.5 Mg 4220 Telmisartan 40Mg+Amlodipine 5Mg 4221 Telmisartan 40Mg+Metoprolol 25Mg 4222 Telmisartan 40Mg+Metoprolol 50Mg 4223 Telmisartan 80 Mg 4224 Telmisartan 80 Mg + Hydrochlorthiazide 12.5 Mg 4225 Telmisartan 80Mg+Amlodipine 5Mg 4226 Telmisartan+Hydrochlorthiazide ( 40+12.5 ) 4227 Telmisartan+Hydroethiazide ( 80+12.5 ) 4228 Telmisertan 20Mg 4229 Telmisertan 40Mg 4230 Temozolamide 100Mg 4231 Temozolamide 140 Mg 4232 Temozolamide 180 Mg 4233 Temozolamide 20Mg 4234 Temozolamide 250Mg 4235 Tenecteplase 20 Mg 4236 Tenecteplase 30Mg 4237 Tenecteplase 40Mg 4238 Tenegliptin 20 Mg + Metformin 100 Mg 4239 Tenegliptin 20 Mg + Metformin 500 Mg 4240 Teneligliptin 20 Mg 4241 Tenofovir Aletenamide Fumarate 25 Mg 4242 Tenofovir Alfenamide Frumurate 4243 Tenofovir Disoproxil 300Mg 4244 Tenofovir Disoproxil Fumarate 4245 Tenofovir Disoproxil Fumarate 300 Mg & Emtricitabine Ip 200 Mg 4246 Tenofovir Disoproxil Fumarate 300 Mg & Lamivudine 300 Mg Tabs Ip 4247 Tenofovir Disoproxil Fumarate 300 Mg, Emtricitabine 600 Mg & Efavirenz 200 Mg 4248 Tenofovir Disoproxil Fumarate 300 Mg, Lamivudine 600 Mg & Efavirenz 300 Mg 4249 Terazocin 1Mg 4250 Terazocin 2Mg 4251 Terbinafin 4252 Terbinafine 250Mg 4253 Terbutalin Inhaler 4254 Terbutaline 4255 Terbutaline 0.5Mg / Ml 4256 Terbutaline 2.5Mg 4257 Terbutaline 5Mg 4258 Terbutaline Resp. Soln. 4259 Terbutaline Respules 4260 Terbutaline Sulphate Sf 4261 Terbutaline+Bromhexine+Guaiphenesin+Menthol 4262 Teriflunomide 14 Mg 4263 Teriflunomide 7 Mg 4264 Teriparatide 600 Mcg / 2.4Ml 4265 Teriparatide 750 Mcg / 3 Ml 4266 Terizidone 250 Mg 4267 Terlipressin 1.0 Mg 4268 Testosterone 1 Gm 4269 Testosterone Enanthate 250Mg / Ml 4270 Testosterone Propionate Phenylpro 4271 Testosterone Undecanoate 4272 Testoviron Depot 100 Mg 4273 Testoviron Depot 250 Mg 4274 Tetanus Immunoglobin Human 1000Iu 4275 Tetanus Immunoglobin Human 250Iu 4276 Tetanus Immunoglobin Human 500Iu 4277 Tetanus Toxoide 4278 Tetrabenazine 25 Mg 4279 Tetracyclin 1% 4280 Tetracyclin 250Mg 4281 Thalidomide 100 Mg 4282 Thalidomide 200 Mg 4283 Thalidomide 50 Mg 4284 The Advanced Anti Scar Gel 15Gm 4285 The Advanced Anti Scar Gel 5Gm 4286 Theophylline 200 Mg 4287 Theophylline 400 Mg 4288 Theophylline 50Mg / Ml 4289 Theophylline 600 Mg 4290 Theophylline+Salbutamol 4291 Theophylline+Salbutamol 4292 Thiamine 100Mg 4293 Thiamine 100Mg / Ml 4294 Thiamine Propyl Di Sulphide 75Mg 4295 Thiocalchi+Accelofenac 4296 Thiocalchi+Epirasone 4297 Thiocalchi+Lornoxicam 4298 Thiocalchiside 2Ml 4299 Thiocalchiside 4Mg 4300 Thiocalchiside 8Mg 4301 Thioguanine 40Mg 4302 Thiopentone Sodium 250 Mg 4303 Thiopentone Sodium 500Mg 4304 Thioridazine 10Mg 4305 Thioridazine 50Mg 4306 Thymol + Eucalyptol + Benzoic Acid + Menthol ( Big ) 4307 Thymol + Eucalyptol + Benzoic Acid + Menthol ( Small ) 4308 Thyoxine Sodium 75 Mcg 4309 Thyrotropine Alfa Human Recombinant 4310 Thyroxine Sodium 100Mcg 4311 Thyroxine Sodium 12.5Mcg 4312 Thyroxine Sodium 125Mcg 4313 Thyroxine Sodium 150Mcg 4314 Thyroxine Sodium 25Mcg 4315 Thyroxine Sodium 50Mcg 4316 Thyroxine Sodium 62.5Mcg 4317 Thyroxine Sodium 75Mcg 4318 Thyroxine Sodium 88 Mcg 4319 Tianeptin 12.5Mg 4320 Ticagrelor 60Mg 4321 Ticagrelor 90Mg 4322 Ticagretor 60 Mg 4323 Ticagretor 90 Mg 4324 Ticarcillin 4325 Ticarcillin + Clav Acid 4326 Ticlopidine 250Mg 4327 Ticlopidine 250Mg + Aspirine 100 Mg 4328 Ticlopidine250mg+Aspirine75mg 4329 Tigecycline 50Mg 4330 Timolol Maleate 4331 Timolol Maleate 0.5% Preservative Free With Comode 4332 Timolol+Pilocarpine 4333 Tincture Benzoine 400Ml 4334 Tinidazole 2Mg 4335 Tinidazole 500Mg 4336 Tinidazole Iv 500 Ml 4337 Tinidazole+Miconazole+Azithromycin 4338 Tiotropium 9 Mcg + Formoterol 6 Mcg 4339 Tiotropium Bromide 4340 Tiotropium Bromide ( 18Ug ) 4341 Tiotropium Bromide ( 9Ug / 18Ug ) 4342 Tirofiban Hcl .2 5 Mg / Ml 50Ml 4343 Tirofiban Hcl 5 Mg 4344 Titropium + Formetrol 4345 Tizanidine Hcl 2 Mg 4346 Tizanidine Hcl 4 Mg 4347 Tnk-T-Pa 20Mg 4348 Tobramycin 4349 Tobramycin 4350 Tobramycin 4351 Tobramycin + Dexamethasone 4352 Tobramycin + Fluorometh 4353 Tobramycin 20 Mg 4354 Tobramycin 80Mg 4355 Tobramycin Inhalation Solution 4356 Tobramycin Inhaler 4357 Tobramycin Nebuliser Solution 4358 Tocilizumab 100Mg 4359 Tocilizumab 400Mg 4360 Tocilizumab 80Mg 4361 Tocotrienol 400Mg 4362 Tofacitnib 5Mg 4363 Tokoferol + Vitamin 4364 Tolperisone Hcl 100Mg 4365 Tolperisone Hcl 150 Mg 4366 Tolperisone Hcl 450Mg 4367 Tolperisone Hcl 50Mg 4368 Tolterodine Tartrate 2Mg 4369 Tolterodine Tartrate 4Mg 4370 Tolvaptan 15Mg 4371 Tolvaptan 30Mg 4372 Top Nitro – 10 4373 Top Nitro – 5 4374 Topiramet 100 Mg 4375 Topiramet 25 Mg 4376 Topiramet 50 Mg 4377 Torsemaide 10Mg + Sprironolactone 50Mg 4378 Torsemaide 20Mg + Sprironolactone 50Mg 4379 Torsemide 100Mg 4380 Torsemide 10Mg 4381 Torsemide 20 Mg 4382 Torsemide 40 Mg 4383 Torsemide With Spironolactone 4384 Trabectadine 1Mg 4385 Trace Elements 4386 Trace Elements 10 Ml 4387 Tramadol + Paracetamol + Diclomine 4388 Tramadol 100 + Paracetamol 500 4389 Tramadol 100Mg 4390 Tramadol 18.75Mg + Paracetamol 162.5Mg 4391 Tramadol 50+Paracetamol 500 4392 Tramadol 50Mg 4393 Tramadol 50Mg / 1Ml 4394 Tramadol Hcl 100Mg 4395 Tranexamine Acid 250 Mg 4396 Tranexamine Acid 500 Mg 4397 Tranexamine Hcl 100Mg / 5Ml 4398 Tranexamine Hcl 40Mg 4399 Traneximic Acid+Ethamsylate 4400 Transdermal Fentanyl System 100Mcg 4401 Transdermal Fentanyl System 12Mcg 4402 Transdermal Fentanyl System 25Mcg 4403 Transdermal Fentanyl System 50Mcg 4404 Transdermal Fentanyl System 75Mcg 4405 Trastuzumab 150Mg 4406 Trastuzumab 440Mg 4407 Trastuzumab Emtansine 100 Mg 4408 Trastuzumab Emtansine 160 Mg 4409 Trenaxa+Mefenamic Acid 4410 Treptorelin 22.5 Mg 4411 Tretinoin + Hydroquinone 4412 Tretinoin + Hydroquinone 4413 Tretinoin 0.05% 4414 Tretinoin Gel .025% 4415 Tretinoin Gel .1% 4416 Tretinoin Gel 0.04% 4417 Tretinoin+Clindamycine 4418 Tretitoin Microphere 4419 Triamcilone Acetonide 40Mg 4420 Triamcinolone + Acetonide 4421 Triameinolone Acetomide 0.1% 4422 Triamterene 50Mg + Benzthiazide 25Mg 4423 Trichloryl 30Ml 4424 Triclophos Syrup 30Ml 4425 Triclosan 4426 Trihexyphenidyl 2Mg 4427 Trimathorin 100Mg 4428 Trimetazidine 20Mg 4429 Trimetazidine 35Mg Modified Release 4430 Trimetazidine 60Mg 4431 Trimethoprim 100 Mg 4432 Trimethoprim 200 Mg 4433 Trimethyl Glycine Mecobalamin + Vit 4434 Triminidone 4435 Tripro + Pseudo + Para 2.5+60+500 Mg 4436 Tripro + Pseudo + Para 2.5+60+500Mg 4437 Triptorelin 11.25 Mg 4438 Triptorelin 22.5 Mg 4439 Triptorelin 22.5 Mg 4440 Triptorelin Acetate 172 Mg 4441 Triptorelin Acetate 3.75 Mg 4442 Triptoreline 3.75Mg 4443 Trisodium Citrate 4% Solution 4444 Trospium Chloride Sustained Release 20 Mg 4445 Trospium Chloride Sustained Release 40 Mg 4446 Trospium Chloride Sustained Release 60 Mg 4447 Troxerutin Calcium Dobesillate Zince Phen 4448 Troxipide 100 4449 Troxipide 200 4450 Troxipide 300 4451 Trypan Blue Solution 4452 Trypon 4453 Trypsin 48 Mg + Bromelain 90 Mg + Rutoside Trihydrate 100 Mg 4454 Trypsin 48 Mg + Bromelain 90 Mg + Rutoside Trihydrate 100 Mg + Diclofenac Sodium Ip 50 Mg 4455 Trypsin+Chymotrypsin 4456 Typhoid Polysachride 4457 Typhoid Vaccine 0.5Ml 4458 Ubidecarenone 120Mg L-Carnitine L-Tartrate 500Mcg Choline Bitartrate 1500Mcg & Selenium 200Mcg 4459 Ubiqunol 100 Mg 4460 Udenafil 4461 Ulinastatin 100000 Iu 4462 Urea + Bethamethsone 15 Gm 4463 Urea + Bethamethsone 20Gm 4464 Urea+Lactic Acid+Propyline 4465 Urea+Lactic Acid+Propyline 4466 Urine Pregnacy Kit 4467 Urofollitropin Equivalent To Activity Of Follicle Stimulating Hormone ( Fsh ) - 150 Iu 4468 Urofollitropin Equivalent To Activity Of Follicle Stimulating Hormone ( Fsh ) - 75 Iu 4469 Urokinase 2.5 Lac Iu 4470 Urokinase 5Lac Iu 4471 Ursodeoxycholic Acid 4472 Ursodexocholic Acid 150Mg 4473 Ursodexocholic Acid 150Mg S.R. 4474 Ursodexocholic Acid 300 Mg 4475 Ursodexocholic Acid 450Mg Sr 4476 Ursodexocholic Acid 75Mg 4477 Ursodexocolie Acid 500Mg Sr + Silymarin 4478 Vacuronium Bromide 10Mg 4479 Vacuronium Bromide 4Mg 4480 Valacyclovir 1Gm 4481 Valacyclovir 500Gm 4482 Valdecoxib 10Mg 4483 Valdecoxib 20Mg 4484 Valdecoxib 40Mg 4485 Valethamate 10Mg 4486 Valethamate 10Mg 4487 Valgancyclovir 450 Mg 4488 Valsartan 160 Mg 4489 Valsartan 40 Mg 4490 Valsartan 80 Mg 4491 Valsartan 80 Mg+Hydrochlorthizide 4492 Vancomycin 125 Mg 4493 Vancomycin 250Mg 4494 Vancomycin 500 Mg 4495 Vancomycin 500Mg 4496 Varicella Immunoglobulin 4497 Varicella Vaccine 4498 Vasopressin Inj 4499 Venlafexine 37.5 Er 4500 Venlafexine 37.5 Xr 4501 Venlafexine 75 Er 4502 Venlafexine 75 Xr 4503 Verapamil 5Mg / 2Ml 4504 Verapamil Sr 120 Mg 4505 Verapamil Sr 80 Mg 4506 Vericella ( Chicken Pox Vaccine ) 4507 Veriniclane Tartrate 0.5 Mg 4508 Veriniclane Tartrate 1 Mg 4509 Verpamil 5Mg / 2Ml 4510 Verpamil 240 S.R. 4511 Verpamil 40 Mg / Ml 4512 Verpamil 40Mg 4513 Verpamil 80Mg 4514 Verteporfin 15Mg 4515 Vigabatrin 500Mg 4516 Vildagliptin 50 Mg 4517 Vildagliptin 50 Mg + Metformin 1000 Mg 4518 Vildagliptin 50 Mg + Metformin 500 Mg 4519 Vinblastine Sulphate 10Mg 4520 Vincristine 1 Mg 4521 Vinorlebine 50Mg 4522 Vit A, Vit B, Vit. C, D3 & Zn., 100 Ml 4523 Vit B1, B6, B12 4524 Vit B1, B6, B12, & Vit D 4525 Vit B12+ Vit C+ Folic Acid 4526 Vit D3 60000 Iu 4527 Vit D3 60000 Iu 4528 Vit. B1 B6 B12 + Calcium Pentothenate 4529 Vit. B1, B6, B12 / 2Ml 4530 Vit. B12+Folate 4531 Vit. B12+Vit. C+Vit. E & Zinc 4532 Vit. B12+Vit.C+Fol.12+Incenamide 4533 Vit. B12+Vit.C+Fol.12+Zinc 4534 Vit. B12+Vit.C+Fol.12+Zinc 4535 Vit.A, B1, B2, B6, B12, Ferrous Sulphate 4536 Vit.A, B1, B2, B6, B12, Ferrous Sulphate 4537 Vit.D3-60000 Iu 4538 Vitamin B 12 4539 Vitamin & Minerals 4540 Vitamin A 4541 Vitamin A 4542 Vitamin A 4543 Vitamin A 4544 Vitamin B 1 4545 Vitamin B Complex 4546 Vitamin B Complex + Zinc + Folic Acid 4547 Vitamin B Complex 120Ml 4548 Vitamin B Complex 200Ml 4549 Vitamin B Complex 250Ml 4550 Vitamin B Complex Forte 100Ml 4551 Vitamin B Complex Vitamin C - Zinc 4552 Vitamin B Complex With Vitamin C 4553 Vitamin B Complex With Vitamin C + Folic Acid 4554 Vitamin B1, B6, B12 4555 Vitamin B1, B6, B12, 3 Ml 4556 Vitamin B12 4557 Vitamin B-12 / Thiamine ( For I.V.Use ) 4558 Vitamin C 4559 Vitamin C + Vit. E + Ferric Acid 10 Ml 4560 Vitamin C 500 Mg 4561 Vitamin C 500Mg 4562 Vitamin D 3 Lac Iu / Ml 4563 Vitamin D 60000 U 4564 Vitamin D In Liquid Nano Particles 4565 Vitamin D3 4566 Vitamin D3 4567 Vitamin D3 ( 1Ml=400Iu ) 4568 Vitamin D3 ( 1Ml=800Iu ) 4569 Vitamin D-3Lac Unit 4570 Vitamin D-6Lac Unit 4571 Vitamin E 4572 Vitamin E 4573 Vitamin E + Aloevera 4574 Vitamin E + Primosa Oil 4575 Vitamin E 200 Mg 4576 Vitamin E 400Mg 4577 Vitamin E 600Mg 4578 Vitamin E Carbohydrate 4579 Vitamin E Cod Lever 4580 Vitamin K 10 Mg 4581 Vitamin K 10Mg / Ml 4582 Vitamin K 1Mg / 0.5Ml 4583 Vitamine - E + Levocarnitine 4584 Voglibose 0.2 Mg & Metformin 500Mg 4585 Voglibose 0.2 Mg + Glimepride Ip 1 Mg + Metformin Hydrochloride Ip 500 Mg ( As Extended Release ) 4586 Voglibose 0.2 Mg + Glimepride Ip 2 Mg + Metformin Hydrochloride Ip 500 Mg ( As Extended Release ) 4587 Voglibose 0.2 Mg Glimepiride 1 Mg Metformin Hydrochloride 500 Mg ( As Sustained Release Form ) 4588 Voglibose 0.2 Mg Glimepiride 2 Mg Metformin Hydrochloride 500 Mg ( As Sustained Release Form ) 4589 Voglibose 0.2Mg 4590 Voglibose 0.3 Mg & Metformin 500Mg 4591 Voglibose 0.3Mg 4592 Voglibose Ip0.2Mg, Gliclazide Ip 80 Mg, Metformin Hydrochloride Ip 500Mg 4593 Voriconazole 200 Mg 4594 Voriconazole 200 Mg 4595 Voriconazole 400Mg 4596 Voriconazole 400Mg 4597 Voriconazole 50 Mg 4598 Vortioxetine 10 Mg 4599 Vortioxetine 20 Mg 4600 Vortioxetine 5 Mg 4601 Warfarin Sodium 2Mg 4602 Warfarin Sodium 5Mg 4603 Water For Injection 10Ml 4604 Water For Injection 5Ml 4605 Xanthinol Nicotinate 150Mg. 4606 Xanthinol Nicotinate 500Mg. 4607 Xantinol 300Mg / 2Ml 4608 Xylometazoline Hcl 4609 Zabpro 500 Mg 4610 Zemigliptin 50 Mg 4611 Zerostat B 4612 Zidovudine 100Mg 4613 Zidovudine 300Mg 4614 Zidovudine 50Mg / Ml 4615 Zinc Acetate 4616 Zinc Acetate 50Mg 4617 Zinc Carbonate 4618 Zinc Oxide + Dimethecon + Calamine + Cetrcide 4619 Zinc Oxide Spf 19 4620 Zinc Oxide Spf 26 4621 Zinc Oxide Spf 30 4622 Zinc Oxide Spf 40 4623 Zinc Sulphate 4624 Zinc Sulphate 50Mg 4625 Zinc+Vit. B12+Vit.C+Fol.12 4626 Ziprasidone 20Mg 4627 Zolidronic Acid 4 Mg 4628 Zolidronic Acid 5 Mg 4629 Zolmitoriptan 4630 Zolpidem Er 12.5 4631 Zolpidem Er 6.25 4632 Zolpidem Tartarate 10 Mg 4633 Zolpidem Tartrate 5 Mg 4634 Zolpilone 0.675G 4635 Zonisamide 100Mg 4636 Zonisamide 25Mg 4637 Zonisamide 50Mg 4638 Zoster Immunoglobulin 4639 Zuclopenthixol Acetate 50 Mg 4640 Zuclopenthixol Decanoate 200 Mg 4641 Benidipine Hydrochloride 4 Mg 4642 Benidipine Hydrochloride 8 Mg 4643 Calcium Syrup Containing Hydroxyappetite 4644 Carvedilol Er 10 Mg 4645 Carvedilol Er 20 Mg 4646 Carvedilol Er 40 Mg 4647 Carvedilol Er 80 Mg 4648 Crysatlline Pencicillin 4649 Dihydralazine Sulphate 25 Mg 4650 Erythromycin Eye Drops 4651 Furosemide Drops 4652 Glycerine Suppository 4653 Hepatitis A Live Vaccine 4654 Hydralazine Hydrochloride 50 Mg 4655 Hydralazine Hydrochloride 10 Mg 4656 Hydralazine Hydrochloride 100 Mg 4657 Hydralazine Hydrochloride 25 Mg 4658 Inactivated Japanese Encephaltitis Vaccine 4659 Lansoperazole 15 Mg 4660 Medium Chain Triglycerides Containing Milk Formula 4661 Minocycline Hcl 100 Mg 4662 Potassium Binding Resins 4663 Procaine Penicillin 4664 Salmeterol + Fluticasone Accuhaler 50 / 250 4665 Salmeterol + Fluticasone Accuhaler 50 / 500 4666 Topical Preparation Containing Fusidic Acid 4667 Topical Preparation Containing Zinc Oxide 4668 Vancomycin 250 Mg 4669 Varicella Live Vaccine
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 65
35.
Defence #10655672 Price Bid
Tender For Special Repair To Married Accommodation Bldg No.P-82 ( 1, 2 ) , P-91 ( 1, 2, 3 ) And P-129 ( 1, 2, 3 ) Of Mt Lane At Cme.; 1 Dismantling Of Single Layer Mangalore Pattern Roof Tile Laid Dry Complete All As Specified And Directed 2 All As Per Item No.1 Above, But Bedded In Lime Or Cement Mortar Complete All, As Specified And Directed. 3 Dismantling Battens For Tiles, Shingles Etc, Of Any Size Including Tilting Fillets Spacing Exc 15 Cm Complete All As Specified And Directed. 4 Dismantling Timber Scantlings 40 Sq. Cm And Over In Section, In Any Position 5 M&L For Roof Tiles, Mangalore Pattern, Interlocking At Side Joints Laid Dry Complete All As Specified And Directed. 6 M&L For Ridge Tiles, Mangalore Pattern, Set And Jointed In Cm 1:6 Complete All As Specified And Directed. 7 M&L 2Nd Class Hardwood Clean Sawn Battens At 30Cm Centres Of Sectional Area Exc 5 & N.Exc 15 Sqcm Complete All As Specified And Directed. 8 M&L Second Class Hard Wood Clean Sawn In Scantling Fixed In Framed Work Complete All As Specified And Directed. 9 Dismantling Boarding , Any Description In Any Position With Nails Complete 10 M&L 2Nd Class Hardwood Clean Sawn Weather Boarding, Plain, 20Mm Thick Or Feather Edged 15Mm To 20Mm Thick And Fixed With 30Mm Laps Complete All As Specified And Directed. 11 M&L For Preparing The Surfaces Of Wood And Wood Based Materials New Or Old Of Any Description And Girth Noth Otherwise Described And Treated With Two Coats Of Cresote Oil Complete All As Specified And Directed 12 M&L For Preparing The Surfaces Of Tiles Battern Any Size And Spacing Prepared And Treated All Over ( Measured Overall On One Side Only ) , Spaces Not Deducted With Two Coats Of Cresote Oil Complete All As Specified And Directed. 13 M&L For Preparing New Surface Of Wood Of Any Decription, Not Otherwise Described Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All, As Specified And Directed. 14 Dismantling Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness, Including Nainital Or Similar Pattern Roof Coverings 15 S&F 0.63Mm Thick Cgi Sheeting With Two Corrugation Side Lap, Fixed With Coach Screws And Washers, In Roof, Walls Etc Including Dismantling Of Existing Sheet Of Any Descriptioncomplete All As Specified And Directed. 16 M & L For False Ceiling With 4Mm Thick Designer E Board Fixed On Gi Grid Work With Powder Coated Finish On Exposed Surface Of Size 0.6 X 0.6M Consisting Of Gi Angle Supported On Wall Of Size 24Mm X 28 X 0.7Mm Main Tee Of Size24mm X38mm X 0.7Mm, Cross Tee Of Size24mm X 28Mm X 0.7 Mm Using Porpose Made Members Interlocking To Each Other And40mm X 3Mm Flat Gi Mild Steel Strip Suspender Made To Shape At 1200Mm C / C Fixed With 3Mm Dia Gi Wireand Making Holes Etc All As Directedincluding Two Coats Of White Wash On Ceiling After Preparation Of Surfaces And As Per Manufacture Instruction Including Taking Down Old Ceilingmake Of Gi Grid Work : Armstrong / Swastik / Techno Grid Make Of E Board : Everest / Indian Gypsum / Armstrong Or Equivalent Approved . 17 Dismantling Water Tanks And Removing To Store Capacity Exc 250 & N.Exc 500 Ltrs Complete All As Specified And Directed. 18 S&F For 500 Ltr. Capacity Rotational Moulded Polyethylene Water Storage Tankscylindrical Vertical With Closed Top ) Hoisted And Fixed In Position All As Specified In Ssr Part I 19 M&L 20Mm Bore Dia Ball Brass Valves, High Pressure With Polythene Float And Flynut Complete Screwed For Iron Pipe Or Brass Ferrule Complete All As Specified And Directed. 20 Demolition Of Cement Concrete ( Un-Reinforced ) In Roof / Floors Other Than Ground Level Beam, Stair Case, Landing, Chajjas And Similar Items Includingwater Proofing Treatment In Any Layersand Removal Of Debris To Distance Exceeding 250M And Not Exceeding 500M From The Site Complete All As Specified And Directed. 21 M&L For 25 Mm Thick , Pcc 1:2:4 ( Type B0 Using 20Mm Graded Stone Aggregate ) As In Levelling Course To Match The Undulations Of Roof And In Coping, Roof Kerbs, Fins Including Benching Etc Complete All As Specified And Directed 22 M&L 10 Mm Thick Cement Screed In Cm 1:3 Mixed With Water Proofing Compound Of Approved Make Over Rcc Roof Slab And Vertical Surface, Finished Even And Smooth By Using Steel Trowel Complete All As Specified And Directed. 23 M&L For App Based Polymeric Membrane Minimum Weighing 3 Kg / Sqm And Minimum 3Mm Thick Reinforced With Polyster Non Woven Fabric ( Wt Not Less Than 150 Gms / Sqm ) Laid Over Primed Surface Including Bituminous Primer Conforming To Is-3384 Applied @ 0.3 Ltr / Sqm By Forced Complete All As Specified And Directed. Four Course Roof Treatment Consists Of As Under :- ( A ) Applying One Coat Of Bituminous Primer Conforming To Is-3384 @ 0.30 Ltr Per Sqm. ( B ) Laying Of App Based Membrane As Specified Thickness And Weight. ( C ) Applying One Coat Of Bitumin Grade 85 / 25 @ 1.2 Kg / Sqm. ( D ) Applying Two Coat Of Aluminium Paint @ 100Ml / Sqm 24 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) , Removing Serviceable Tiles To Store And Rubbish Off The Premisescomplete All As Specified And Directed. 25 Demolition Of Cement Concrete ( Unreinforced ) In Ground Floors And Pavings Not Exceedidng 15Cm Thickness ( Below ;Or Aboved Ground Level ) All As Specified And Directed. 26 M&L For 75Mm Thick Pcc Type D-2 ( 1:4:8 ) Using 20Mm Graded Aggregate As In Sub Base Etc Complete All As Specified And Directed 27 M&L For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick For Laying Floor / Wallfinishes In Cm 1:6. 28 M&L For Coloured Non - Skid Ceramic Tiles 8 To 10 Mm Thick Area Of Each Tile Exceeding 0.18 Sqm But Not Exceeding 0.38 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match 29 M & L For Non-Skid Ceramic Tiles 7 To 8 Mm Thick ( Square / Rectangular ) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Etc. Complete. 30 M & L For Coloured Non Skid Ceremic Tiles 8 To10 Mm Thick ( Square / Rectangular ) Polished, Area Of Each Tiles Not Exceeding 0.38 Sqm, Inskirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Etc Complete As Specified And Directed. 31 M& L For Rendering 10Mm Thick Cement Mortar In 1:4 As Inbacking Coat Complete All As Specified And Directed 32 M&L For Glazed Ceramic Coloured Tiles In Verticle Surface 350Mmx250mmx7mm / 450Mmx350mmx7mmthick Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over Backing Coat 10Mm Thick Cement Mortar In 1:4 Complete All As Specified And Directed, 33 Dismantling Stone Slab And Tiles Of Any Description And Thickness As In Floor Including Cement Mortar Bedding And Rubbish Off The Premisses Complete All As Specified And Directed. 34 M& L For 18 To 20 Mm Thick, Granite ( Of Any Type ) Work ( Table Rubbed And Polished ) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar ( 1:4 ) Including Pointing In White Cement ( 1:2 ) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Etc Complete All As Specified And Directed.. 35 M&L Machine Cut Cuddappah Stone Slab 20-25Mmthick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Over And Including 15Mm Thick Screed Bed In Cm 1:6 Complete All As Specified And Directed. 36 Roundidng To Edges Of Stone Slabs , Such As Insteps, Cooking Plateform, And Other Similar Situation Complete All As Specified And Directed. 37 Taking Up Or Down 15Mm Bore Steel Water Tubing & Connections, Including Cleaning For Refixing Or Offering Credit As Per Schedule Of Credit All As Directed. 38 All As Per Item No.37Above, But 20Mm Bore 39 S&F 15Mm Bore Medium Grade Galvanised Steel Water Tubing With All Fitting & Fixed Complete To Walls Or Ceiling Or Laid In Floors All As Specifeid And Directed. 40 S&F 20Mm Bore Medium Grade Galvanised Steel Water Tubing With All Fitting & Fixed Complete To Walls Or Ceiling Or Laid In Floors All As Specified And Directed. 41 Refixing 15Mm Bore Old Steel Water Tubing & Connection In New Or Old Position Of Wall, Ceiling, Floor Etc All As Specified And Directed 42 All As Per Item No.41 Above, But 20Mm Bore. 43 M& L For Cutting Chases, Pinning In Stone Concrete Black Or Slab , Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.;And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Exceeding 20Cm Girth Etc. Complete All As Specified And Directed. 44 S&F In Repair Vitreous China Wash Basin , White , Flat Back, Size 630X450mm Excluding Taps, Waste Chain And Plug And Porcelain Stopper But Including Brackets , Waste Coupling Complete All As Specified And Directed. 45 S&F In Repair Vitreous China Wash Down Water Closet Pan ( Pedestal Pattern ) , White ( Excluding Fixing Bolts, Flushing Cisternand Flush Pipe ) Including Seat Cover Complete All As Specified And Directed 46 S&F In Repair 10 Ltr Capacity Pvc Valveless, Syphonic Action Type Flushing Cistern, Low Level, White, With Inlet Ball Valve, Float And Handle Including Brackeet And 32Mm Dia Flush Pipe Of Polyethylene Of Low Or High Density For Low Level Cistern Complete All As Specified And Directed. 47 S&F For In Repair Brass Chromium Plated Two Way Bib Cock Fancy Type, 15Mm Bore ( Min Wt. 550 Grams ) Of Approved Make By Eic / Ge Etc.Complete All As Specifed And As Directed. 48 S & F For Brass Chromium Plated, 15 Mm Bore Healthfoucet, ( Flexy Type ) 1.00 Mtr. Long Of Approved Make By Eic / Ge Etc. Complete All As Specified And As Directed. 49 S&F In Repair 15 Mm Dia Pillar Taps, Cast Copper Alloy, With Capstan Heads, Chromium Plated Fancy Type , Screwed Down High Pressure, With Or Without Lettered Hot Or Cold Woth Long Shanks And Flynuts, Screwed For Iron Pipe Complete All As Specified And Directed. 50 S&F Pvc In Repair Connection 15Mm Size With Ptmt Nuts Of Length 450Mm Complete All As Specified And Directed. 51 S&F In Repair 15Mm Fancy Type Bib Tap, Chromium Plated With Crutch Or Butterfly Handle, Screwed Down , Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And Directed 52 S&F In Repair 15Mm Dia Stop Valve Chromium Plated Fancy Type Screwed Down High Pressure With Crutch Or Butterfly Handle Screwed Both End For Iron Pipe Or For Union Complete All As Specified And Directed. 53 S&F In Repairs Brass Chromium Plated Shower Rose 125Mm Size 54 S&F In Repair 75Mm Pvc ( Swr ) Pipes Single Socketed In Any Length With Rubber Ring Joints Fixed To Walls Complete All As Specified And Directed. 55 All As Per Item No 54 Above, But 110Mm Complete All As Specified And Directed. 56 S&F In Repair 75 Mm Pvc ( Swr ) Bend Any Radius Complete All As Specified And Directed 57 All As Per Item No 56 Above, But 110Mm Dia Complete All As Specified And Directed. 58 S&F In Repair 75Mm Pvc ( Swr ) Junction Single ( Single T ) Equal Or Unequal Complete All As Specified And Directed. 59 All As Per Item No 58 Above, But 110Mm Bore Of Pipe Complete All As Specified And Directed. 60 M&L In Repair 75Mmpvc ( Swr ) Floor Trap With Grating Including Jointing With Solvent Cementcomplete All As Specified And Directed. 61 All As Per Item No 60 Above, But 110Mm Complete All As Specified And Directed. 62 S&F In Repair 75Mm Pvc ( Swr ) Vent Cowl Complete All As Specified And Directed. 63 All As Per Item No.62 Above, But 110Mm Complete All As Specified And Directed. 64 S&F In Repair Stainless Steel Sink, Made Out Of 1.00 Mm Thick Sheet For Kitched With Plug, Washer Pipe Cast Iron Cantilever Brackets, Connecting Union Overall Size 495X420mmbowl Size 410Mm X 330Mm X160mm All As Specified And Directed. Make: Nirali / Diamond / Blue King / Kingston / 65 S&F In Repairs 600Mmx450mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup 66 S&F In Repair Brass Chromium Plated Tubular Towel Rail, 20Mm Dia , D Type 60Cm Long Between Flanges Complete All As Specified And Directed. 67 S&F For In Repairsheet Glass Shelf Assembly Consisting Of 5.5 Mm Thick Sheet Glass Shelf 12 Cm Wide With Stain Steelbracket Guard And Railing 60 Cm Long Etc. Complete All As Specified And As Directed. 68 S&F In Repairs Vitreous China Soap Tray Embedded In The Wall As Specified And Directed. 69 S&F Toilet Paper Holder, Vitreous China, Box Type 70 S& Fin Repair Brass Cp Mixer For Mixing Hot & Cold Water Screwed Down For 15 Mm Size Iron Pipe And Fixed 71 Taking Down Chowkats Or Frames With Shutter ( Without Taking Off Shutters From The Frames ) Not Exc 1.5 Sqm Each And Removing From Sitecomplete All As Sepcified And Directed. 72 All As Per Item No 71 Above But Exc 1.5 Sqm And N.Exc 4 Sqm Complete All As Specified And Directed. 73 S&F 2Nd Class Hard Woodplain Solid Straight Chowkhats And Frames, Wrought, Framed Rebated On The Solid Rounded Or Chamferred, Put Together With Glue Pinned At Jointsetc. Complete All As Specified And Directed 74 S& Fixed 2Nd Class Hard Wood 35 Mm Thick Made Glazed And Skeleton Shuttersopen Rebated And Prepared To Recieve Glass, Gauze, Etc. ( Without Sash Bars ) , Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitred Beads For Securing Glass, Etc, Size Of Members Of Shutters As Spfd In Ssr Part-1, Section 8, Clause 8.24 ( A ) Complete All As Spfd And Directed . 75 S& Fixed Factory Made Plain Framed Panelled Shutters 35Mm Thick Of 2Nd Class Hard Wood ( Any Number Of Panels ) With Panels Of Timber Flat On Both Sides Feather Edges Or Panel Of 9Mm Bwp Commercial Ply Over 12Mm Thick Veneered Panticle Board With Commercial Face Veneers Fixed To Chowkhat . The Size Of Rail And Stile As Per Is : 1003 ( Part-1 ) , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And Directed. 76 M&L For Preparing New Surface Of Wood Of Any Decription, Not Otherwise Described Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. 77 Mild Steel Works As In Bands Straps, Hold Fasts Etc, Conforming To Is-2062-2006 ( Fe-290 ) , Embedded Portion Duly Painted With Bituminious Paint And Sanded, Complete All As Specified. 78 Preparing Surface Of Iron And Treating Small Articles Such As Stop, Covers, Gully Grating, Holdfasts, End Of Posts Area Exc 0.1 Sqm Each Complete All As Specified And Directed. 79 Cement Concrete Type B1 ( 1:2:4 ) Using 20Mm Graded Stone Aggregate As In Copings, Bed Plates, Fixing Of Hold Fasts And Other Similar Works And The Like Incl Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed Incl Use And Waste Of Necessary Form Work Complete All As Spd. 80 S & F Powder Coated Aluminium Sliding Windows Three Track With Two Glass Shutters Using 4 Mm Thick Glass Tinted Modi Guard And One Shutter With Stainless Steel Wire Gauge Wire Cloth 0.31Mm Nominal Dia Of Wire And Width Of Aperture 1.61Mm, Using Aluminium Powder Coated Sect, Alumini Cleat, Pvc Track, Bearing, Handle Lock Rubber Beading, Etc Complete. Notesize Of Aluminum Sections Are As Under :- ( I ) Three Track Top & Vertical – Jindal Main – 2010 Section No 20621. ( Ii ) Three Track Bottom - Jindal Main – 2010 Section No 20620. ( Iii ) Shutter Vertical Section - Jindal Main – 2010 Section No 20606. ( Iv ) Shutter Top & Bottom - Jindal Main – 2010 Section No 20604 ( V ) Shutter Vertical Middle ( Interlock ) - Jindal Main – 2010 Section No 20605. 81 Aluminium Powder Coated Ventilators Partly Fix And Partly Lowered Of Aluminium Section Designed Dg-2762 ( 40 Mm X 32 Mm X1.5 Mm Thick ) ( Wt 0.668 Kg / Mtr ) Frame And Dg-2763 And Middle Section Of Designed Dg-2763 ( 40 Mm X 32 Mm X 1.5 Mm Thick ) ( Wt 0.654 Kg / Mtr ) , Middle Section Dg-2546 ( 17.27 Mm X 17.15 Mm X 1.22 Mm Thick ) ( Wt 0.124 Kg / Mtr ) Including 4 Mm Thick Pinheaded Figured Glass Louvers With Blades Of 100 Mm Heavy Duty Including With Aluminium Lever Handle Fixed Panel Shall Be Provided With 5 Mm Thick Pin Headed Figured Glass Including All Necessary Rubber Packing, Anodized Aluminium Snap Beading Fixed With Minimum 6 Nos Of Suitable Size Galvanised Screws With Pvc Plug Etc. Complete All As Specified And Directed. 82 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Nottherwise Provided For 83 M&L For Framed Work Such As Grills Or Grating Etc With Ends Of Bars Shouldered As Framed Guard Bars Conforming To Fe-410-0 Or 310-0 All As Specified And Directed. 84 S & F Solid Pvc Doorframe Of Size 50Mm X 47Mm Made Out Of5 Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tubeetc All As Specified And As Directed. 85 Factory Made Solid Pvc Moulded Door Shutter, 28 To 30Mm Thick ( Stiles ) , With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawin 86 M&L 18 / 19Mm Thickpre-Laminated Board Exterior Grade, Prelaminated One Side With Decorative Choice Lamination & Other Side Balancing White Lamination , Fixed With Screw To Timber Frame Including Taking Down Existing Board Of Any Description Complete All As Specified And Directed. 87 Extra Over Rates Of Block Board Or Veneered Particle Board For External Teak Wood 18 / 19Mmlipping 6Mm Thick Fixed With Nails 88 S&F 150Mm Hasp And Staple, Mild Steel, Wire Type Stove Enamelled Black, Including Bolt To Hinge Plate And Fixed With Screw.Complete All As Specified And Directed. 89 S & F Mild Steel Butt Hinges Medium Weight , Cold Rolled, 100Mm, Isi Marked, Complete All As Spd . 90 M&L 200 Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed Etc. Complete 91 M&L 150 Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed Etc. Complete 92 S&F 125Mm Long Aluminium Anodised Handles Or Extruded Section Complete All As Specified And Directed. 93 S&F 150 Mm Long Aluminium Anodised Handles Or Extruded Section Complete All As Specified And Directed. 94 S&F 300Mm Long Aluninium Alloy, Anodised, Sliding Door Bolt With Hasp , Staple, ( Bolt Type ) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts Of Extruded Sections Or Cast-Aluminium Alloy Complete All As Specified And Directed. 95 S&F Mild Steel 300Mm Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 96 S&F Galvanised Mild Steel Wire Cloth 0.56Mm Nominal Dia Of Wire And Width Of Aperture 1.18Mm & Fixed With Tinned Tacks Or Galvanised Wire Staples Complete All As Specified And As Directed. 97 Demolition Of Brick Or Stone / Boulder Masonary , Built In Cement Mortar Including All Quoins, Aarches, Pillars Etc But Excluding Ashlar Facings, Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed. 98 M&L Precast Solid Block Masonry Of Block 1:3:6 Type C-1 Wall Exceeding 10 Cm In Width And Built In Cement Mortar 1:6 Complete All As Specified And Directed. 99 M&L 15Mm Thick Plastering On Concrete Surface In Cm 1:4 Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. 100 Racking Out Joints / Pointing To Random Rubble Masonry, Polygonal Rubble Uncoursed Or Brought Upto Course Complete All As Specified And Directed. 101 M&L Raised Pointing In Cm 1:4 To Random Or Polygonal Rubble, Uncoursed Or Brought Upto Complete All As Sepcified And Directed, 102 Taking Down Cement Plaster On Brick Or Stone Walls Or Concrete Surface Etc Including Raking Out Joints, Hacking For Key Scrubbing Down With Water All As Specified And Directed. 103 M&L Rendering 15Mm Thick On Stone Masonary Surfaces In Cm 1:6 Finished Even And Smooth With Sagol Over And Including Dubbing Out Average 10Mm Thickon Irregular Face Of Walls In Cm 1:6 Complete All As Specified And Directed. 104 M&L Rendering 5Mm Thick On Concrete Surfaces In Cm 1:3 On Ceiling, Finished Even And Smooth With Sagol All As Specified And Directed. 105 M&L 15Mm Thick Cement Plastering On Concrete Surfacesin Cm ( 1:4 ) Finishing Surfaces Even And Smooth Without Using Extra Cementcomplete All As Specified And As Directed. 106 M&L Preparing Newly Plastered Surfaces Of Wall And Applying Two Coats Of Oil Bound Distemper Over One Coat Primer And 3Mm Wall Care Putty On Walls Complete All As Specified And Directed. 107 M&L For Preparation Of Newly Plastered Surfaces And Applying Three Coats Of White Wash On Ceiling All As Specified And Directed. 108 M&L Preparation Of Newly Plastered Or Unplastered Surfaces On Wall Surfaces And Applying Two Coats Of Cement Base Paint Completeall As Specified. 109 M&L Complete Removal Of Existing Treatment And Applying Two Coat Of Oil Bond Distermper White Or Tinned All As Specified And Directed. 110 M&L For Complete Removal Of Existing Treatment And Applying 3Mm Thick Birla Wall Care Putty On Newly Plastered Area On Walls, Etc All As Specified And Directed. 111 M&L For Complete Removal Of Existing Treatment And Applying One Coat Of Primer On Walls On Newly Plastered Area, Etc All As Specified And Directed. 112 All As Per Item No 109 Above, But Two Coat Of White Wash On Ceiling Complete All As Sepcified And Directed. 113 M&L For Two Coat Of Synthetic Enamel Paint Over Wooden Surfaces Including Preparation Of Old Surfaces Over 10Cm Width Or Girth All As Specified And Directed By The Engineer-In-Charge. 114 S &F In Repairs Harrison Rails 20Mm, Mild Steel, Chromium Plated With Fixing Brackets, Stops, Rollers Etc All As Specified And Directed By Engr-In-Charge 115 M&L Cement Concrete 1:3:6 Type C-2 ( 40Mm Graded Stone Aggregate ) As In Floors Plinth Protection, Path Etc 75Mm Thick Smooth Finished Surface Without Using Extra Cement Complete All As Specified And Directed. 116 Chipping Off Loose Concrete / Plaster Upto Sound Stratum Of Rcc Members Such As Slab, Chajjas, Columns, Beams And Clean The Surface With Wire Brush, Washing Down With Water Using Water Jet Including Necessary Scaffolding & Propping To Support The Structural Members Where Work Is To Be Executed And Removing Debries To A Distance Exc 250 Meter But N Exc 500 Meter. 117 Providing And Applying Rust Inhibition Coat System ( In Two Coats ) As Per ManufacturerS Instructions To Exposed Reinforcement After Cleaning And Removing Scales And Rust Complete All As Specified And Directed By Engineer-In-Charge. 118 Providing And Applying A Bond Coat ( Epoxy Based Bonding Materials ) To All Exposed Concrete Surfaces All As Per The ManufacturerS Instructions As Specified And Directed By Engineer-In-Charge. 119 M&L Treatment Of Soil Under Existing Floors Using Emulsion @ One Litre Per Hole, 300 Mm Apartincluding Drilling And Plugging 12 Mm Dia Holes With Cement Mortar 1:2 To Match The Existing Floors 120 Taking Down Carefully Copper / Aluminium Point Wiring ( Light, Fan, Bell, Socket Or Power ) Complete, Including Fixture And Fittings Such As Switches, Ceiling Rose, Pendents, Regulators, Sockets, Light Fittings Etc Removing Materials To Store For Keeping In Safe Custody Or For Taking Creditand Making Good Disturbed Surfaces Of Walls, Floors, Etc . Credit For Above Items Should Be Made As Per Conditions Separately. 121 Taking Down Old Ceiling Fan Any Size Or Any Type And Deposited To Age E / M Store For Necessary Disposal Action Complete All As Specified And Directed. 122 Taking Down Single Phase Electric Meterandrefix The Same After Calibration And Necessary Repair On Wooden Board Complete All As Specified And Directed. Note :Quarter Wise Last Meter Reading Shall Be Noted By The Contractor And Submitted Age E / M Office For Onward Submission To Bso. 123 M&L For Point Wiring For Light / Fan / Bell With Frlsh Cable 1.5 Sqmm Pvc Insulated ( Red For Phase And Black For Neutral ) Unsheathed, Multi Stranded Copper Conductor 1100 Volt Grade In And Incl Not Less Than 2Mm Thick Pvc Casing / Capingwith All Accessories And 1.50 Sqmm Green In Colour Pvc Copper Conductor Cable For Earth Continuity Connected To Common Earth Dolly Inclpvc Box Surface / Flush Type With Pvc Sheet For Mounting Fittings Such As Switches, Sockets, Fan Regulators, Etc Complete All As Specified And Directed For One Light / Fan / Bell Point Controlled By One Switch & Making Goodto Disturbed Surface Of Wall Etc 124 All As Per Item No.123 Above, But For One Multipin 5 Amps Socket Outlet On Same Board.With Other Switch 125 All As Per Item No.123 Above, But For One Multipin 5 Amps Socket Outlet On Independent Board 126 All As Per Item No.123Above, But With 2.5 Sqmm Cable And 2.5 Sqmm For Earth Continuityfor Multipin 15 Amps Socket Outlet Flush Type On Independent Board. 127 S & F Switch Piano, Flush Type, Single Pole One Way 6 Amps Complete All As Specified And Directed. 128 S & F Switch Piano, Flush Type, Single Pole One Way16 Ampscomplete All As Specified And Directed. 129 S & Fbell Pushflush Type Single Pole One Way 5 Ampscomplete All As Specified And Directed. 130 S & F Socket Outlet 2 In 1, 3 Pin, 6 Amps Flush Typecomplete All As Specified And Directed. 131 S & F Socket Outlet 2 In 1, 3 Pin, 16 Amps Flush Typecomplete All As Specified And Directed. 132 S & F Ceiling Rose, 3 Phase Pvc / Polycarbonate Isolated Body, Surface Bakelite 65 X 50 Mm, 3 Terminal Incl Pvc Square Blockcomplete All As Specified And Directed. 133 S & Flamp Holder, Pvc / Polycarbonate Type With Back Plate Suitable For Batten Fitting Incl Pvc Square Blockcomplete All As Specified And Directed. 134 S & F Call Bell Ding Dong Ac, 230 Volts, Single Polecomplete All As Specified And Directed. 135 Supply And Fixing Surface And Wall Mounted Led Batten With Polycarbonate Housing & Integrated Electronic Driver, 1X 22W, 220V, Ac Ready To Use Pack Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete All As Specified And Directed. 136 Supply And Fixing Led Tube Light Fitting Surface And Wall Mounted Led Batten With Polycarbonate Housing & Integrated Electronic Driver, 2 Feet, 10 Watt 220 V Ac Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed. 137 S&F Decorative Wall Light Fittings ( Bracket Light ) , City 3 Made Up Of Polycarbonate Suitable For 10 Watt Led Lamp Incl Led Lamp Incl Taking Down Old Unsv One. 138 Supply And Fixing Led Bldg Security Light 25 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete Withip 65 / 66 Protection Complete All As Specified And Directed. 139 M&L For Sub Main Wiring With Two Run Of4 Sqmm Single Core Multi Stranded Pvc Insulated And Unsheathed Copper Conductor ( Red For Phase And Black For Neutral ) Of Grade 1100 Volt Frlsh Cable 1100 Volt Electrical Grade In And Including Pvc Casing Capingnot Less Than 20Mm Wide& 4Sqmm Copper Conductor Cable Pvc Unsheathed Green Coloured For Earthing With Complete Accessories Duly Connected With Earth Dolly Complete All As Specified And As Directed. 140 S&F Mcb Distribution Board Double Door240volts 8 Way With 200 Amps Rated Bus Bar And Making Good To Disturbed Surfaces Of Floors Walls Incl Taking Down Old Unserviceable One. 141 S & Fmcb Sp 6 To 32 Amps, 230 V Ac, 10 Ka C Curveincl Taking Down Old Unserviceable One Complete All As Specified And Directed. 142 S & Fmcb Spn 40 Amps, 230 V, Ac Incl Taking Down Old Unserviceable One Complete All As Specified And Directed. 143 Supply And Fix Exhaust Fan Made Of Sturdy Engineering Plastic Complete With Louvers Shutter, Voltage 230V, 50 Hz, Rpm 1200, Copper Winding Of Sweep 300 Mm Complete All As Specified And Directed. 144 Supply And Fix Exhaust Fan Made Of Sturdy Engineering Plastic Complete With Louvers Shutter, Voltage 230V, 50 Hz, Rpm 1200, Copper Winding Of Sweep 250 Mm Complete All As Specified And Directed. 145 M & L For Earthing Complete With Gi Earth Plate Electrode Of Size 60 X 60 X 0.6 Cms Thick Burried Directly In Ground Vertically At A Depth Of Not Less Than 2.25 Mtrs Below Normal Ground Level With Top Edge Of The Earth Plate Not Less Than 1.5 Mtr Deep Below Normal Ground Level Connected To Galvanised Iron Wire 4 Mm Dia As Earthing Lead By Means Of Nuts, Bolts And Washers Of Steel After Welding Of Gi Strip To Earth Electrode To The Full Length Of Earth Plate, 15 Mm Dia Gi Tubing Light Grade Protection Pipe Upto Test Point, 20 Mm Dia Gi Watering Pipe With Funnel And Wire Mesh, Pcc 1:3:6 Type C1 Earth Chamber Of Outer Dimension 54 X 54 X 30 Cm And Internal Diamension 30 X 30 X 30 Cm With Rcc 1:2:4 Type B1 Cover Reinforced Of Size 54 X 54 X 10Cm With 6Mm Dia Mild Steel Round Bar @ 15Cm C / C Both Way And 8 Mm Dia Mild Roud Bard Handle Adequate Qty Of Charcoal Dust And Salt Layers All Around The Earth Plate, Removal Of Surplus Soil And Returning Filling In All As Required At Site All As Specified In Plate No 3 Of Ssr Part-I And Directed By Engr-In-Charge. 146 M&L For Led Lamp 9 Watt Complete All As Specified And Directed. 147 Supply And Fixing Ceiling Fan Complete With Blade, Down Rod, Electronic Regulator And Accessories, 230 V, 1200 Mm Sweep. Min Air Delivery 210 Cfm With Service Value 6.00 Bee. Five Star Rated With Brushless Direct Current Motor ( Bldc ) Complete All As Specified And Directed. 148 Supply And Fix Electric Water Heater, Storage Type Steel Body With Copper Inner Tank And Heating Element Upto 2 Kw Capacity 25 Litre, Bee 5 Star Rated Complete With All Accessories Such As Safety Valve, Thermostate, Nrv, Connection Piece Etc. 149 S&F In Replacement Enclosure, Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With One Single Pole Mcb 20 Amps, 240 Volt Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Maharashtra View Result →
36.
Banking and Finance #10621919 Price Bid
Tender For Rate Contract Of Dental Consumables And Non Consumables For Esic Dental College , Rohini Sector 15 , Delhi-110089 -1 Periodontal Dressing ( Non Eugenol ) 2 Impression Disinfectant Spray 3 Calcium Hydroxide Powder 4 Sodium Hypochlorite ( 3% ) ( 500Ml. ) 5 Edta Gel ( 1 Kit With 3 Syringes Each ) 6 Glass Beads 7 Plaster Of Paris 8 Etchant Liquid 9 Etchant Gel 10 Apf Gel 1.23% ( Fluoridated Gel ) 11 Matrix Bands - Ivory No.1 12 Matrix Bands -Ivory No.8 13 Variable Taper Files ( Hand ) 14 Variable Taper Files ( Rotary ) 15 Variable Taper Gutta Percha Points 16 Bonding Agent 17 Plastic Spatula 18 Mirror Tops 19 Posterior Composite 20 Flowable Composite 21 Resin Based Dual Cure Luting Cement 22 K. Files No.8 ( 21Mm & 25 Mm ) 23 K. Files No.10 ( 21Mm & 25 Mm ) 24 Cleaning & Lubricating Oil For Hand Piece 25 Rubber Dam Sheets 26 Endoaccess Bur 27 Diamond Points –Straight Fissure - N-Short Thin N-Medium N-Long Thin N 28 Diamond Points –Tapered Fissure – N-Short N-Medium N- Long N 29 Diamond Points- Inverted Cone - Nsmall Nmedium Nlarge N 30 Diamond Points –Flame Shaped – Small 31 Diamond Points –Wheel Shaped – Small 32 Diamond Points –Disc Shaped – Small 33 Diamond Points-End Cutting Bur 34 Crown Cutting Diamond Points / Stones Kit 35 Fine Grit Diamond Points ( For Finishing ) – Spindle 36 Fine Grit Diamond Points ( For Finishing ) –Tapered 37 Fine Grit Diamond Points ( For Finishing ) – Round 38 Fine Grit Diamond Points ( For Finishing ) –Straight Fissure 39 Tungsten Carbide Plain Cut Cavity Cutting Burs –Round No.2 40 Silver Alloy Powder 41 Mercury 42 Amalgam Capsules 43 1’’Carborandum Disk Small / Thin / Thick 44 Casting Rings ( No. 2, 6 ) 45 Die Spacer 46 Debublizer 47 Die Hardner 48 Inlay Casting Wax 49 Porcelain Stain Kit 50 Sand ( Alumina ) -150Μ & 300 Μ 51 Sprue Wax ( Thin / Thick ) 52 Ring Liner 53 Set Of 16 Posterior Teeth 54 Set Of 6 Lower Anterior Teeth 55 Set Of 6 Upper Anterior Teeth 56 Loose / Assorted Acrylic Teeth For Rpd. 57 Erich Arch Bar 58 Soft Stainless Steel 26 Gauge Wire Roll 59 Light Protection Covers For Image Plate For Vista Scan Mini 60 Autoclave Pouches For Sterilization Should Have Indicator For Sterilization 61 Suction Disinfection 2% -01 Litre / 5 Litre 62 Dental Floss 63 Polishing Cups 64 Tungsten Carbide Bur For Micromotor-Round ( Variable Sizes ) . 65 Tungsten Carbide Bur For Micromotor-Straight Fissure. N-Short Thin. N-Short Thick. N 66 Tungsten Carbide Bur For Micromotor-Straight Fissure . N-Long Thin. N-Long Thick N 67 Diamond Points For Micromotor. Nround- ( Variable Sizes ) . N 68 Diamond Points For Micromotor Straight Fissure- Short / Long. 69 Assorted Stainless Steel Steel Crowns. N ( Primary / Deciduous ) N 70 Assorted Stainless Steel Crowns ( Permanent ) 71 Preformed Molar Band With Pre-Welded Tubes.Variable Sizes. ( Left And Right Side ) 72 Preformed Molar Band With Pre-Welded Tubes.Variable Sizes. ( Left And Right Side ) 73 Non End Cutting Bur For Access Cavity Preparation 74 Metal Free Pre Framed Dental Dam 75 Camphorphenol Based Root Canl Disinfectant 76 Resin Based Root Canal Sealer 77 Chlorhexidine Based Intracanal Medicament / Irrigant 78 Rmgi, Light Cure Nanoionomer Restorative For Class I, Iii, And V With Polyacrylic Conditioner Usable With Light Cure Restorative 79 Self Etch Bonding Agent 80 Band Material – ( Molar, Premolar & Anterior ) 81 M.B.T. Prescription Stainless Steel Brackets With Weldable Molar Tubes ( Upper Triple& Lower Double ) –0.022” Slot 82 Weldable Lingual Sheath With Hook 83 Lingual Buttons – Bondable 84 Begg’S Bondable Brackets With Flat Base & Curved Base 85 Ligature Wire Spool ( 0.009”& 0.010” ) 86 Elastic Cotton Thread 87 Elastomeric Chain – Short, Long & Nclosed N 88 Elastomeric Modules – Clear& Colored 89 Elastic Tooth Separators 90 Arch Wire Sleeve – Grey / Tooth Color 91 Mbt Molar Tubes– Bondable ( 0.22 Slot ) 92 Patient Relief Wax 93 Crimpable Hooks ( Medium / Long ) 94 Niti Open Coil Springs 95 Niti Closed Coil Springs With Eyelets 96 Niti Preformed Archwires ( Round ) – 0.014” 0.016” & 0.018” 97 Niti Preformed Archwires ( Rectangular ) – 0.017X0.025”, 0.019X0.025”, 0.016X0.022” 98 Reverse Curve Of Spee Niti Preformed Wires – 0.018” & 0.019 X 0.025” 99 Stainless Steel Preformed Archwires ( Round ) - 0.014, 0.016, 0.018 & 0.020” 100 Stainless Steel Preformed Archwires ( Rectangular ) - 0.016 X 0.022”, 0.017 X 0.025” & 0.019 X 0.025” 101 Australian A.J. Wilcock Wire – Npulse Straightened 0.014”, 0.016”, 0.018” & 0.020” N 102 Cna Beta Iii Wires Preformed – 0.019 X 0.025” & 0.021 X 0.025” 103 Intraoral Latex Elastics – Variable Sizes 104 Extraoral Elastics Sizes – Variable Sizes 105 Rapid Palatal Expander ( Hyrax Type ) – 9, 11 & 13 Mm 106 Orthodontic Light Cure Composite Kit 107 Orthodontic Self Cure Composite Kit 108 Orthodontic Self Cure Composite Primer 109 Thermoplastic Rubber Pates For Fabrication Of Splints- Different Sizes 110 Ultrasonic Scaler Tips-Flat. 111 Ultrasonic Scaler Tips-Curved & Pointed. 112 Iodoform Powder 113 Gelatin Sponge 114 Hemostatic Surgical Dressing For Extraction Socket 115 Bone Wax 116 Irrigation Tube For Physiodispenser For Nmodel : Surgic. A.P. Nsk, Japan N 117 Saw Blades : Oscillating N ( Compatible With Nsk Handpieces. ) N 118 Saw Blades : Sagittal N ( Compatible With Nsk Handpieces. ) N 119 Ss Unidirectional Extraoral Mandibular Distractor 120 Schanz Pins Of 2.0 Mm Diameter For Extraoral Mandibular Distractor 121 Ss Unidirectional Intraoral Mandibular Distractor 122 Ss Screws Of 2.0 Mm Diameter For Introral Mandibular Distractor 123 Surgical Tungsten Carbid Burs For Micromotor Straight Hand Piece. 124 Surgical Tungsten Carbide Burs For Micromotor Straight Hand Piece 125 Metallic Trimming Burs 126 Glass Lonomer Cement Having Powder With Mixed Silver Alloy Particles ( Silver Alloy Admix ) N + Liquid For Filling Purpose N 127 Die Stone 128 Formocresol 129 Paste Of Ca ( Oh ) 2+Iodoform Twin Paste 130 Zinc Oxide Powder. 131 Eugenol Liquid. 132 Plastic Wedges 133 Wooden Wedges 134 Silver Modified Glass Lonomer Cement, Powder With Sintered Silver Particles + Liquid For Filling Purpose 135 Graded, Premixed Eugenol Free Temporary Filling Material 136 Alginate 137 Impression Compound 138 Dental Stone For Prosthodontics Purpose. 139 Retraction Cord 140 Cold Cure Tooth Colored Acrylic ( Shades 2, 4, 5 ) Powder With Liquid. 141 Polishing Buff ( Cotton ) 142 Acrylic Teeth Sets-Complete With Good Teeth Anatomy And Wear Resistance. 143 Pumice Powder 144 Polishing Cake 145 Sand Paper ( Different Grits ) 146 Disc Mandrels 147 Sand Paper Mandrels 148 Articulating Paper- ( Variable Thickness ) 149 Glass Slabs 150 Dappen Dish 151 Acrylic Stone Trimmers’ Burs ( Different Shapes ) For Straight Hand Piece. 152 Metallic Trimming Burs For Metal Different Shapes For Straight Hand Piece. 153 Soft Denture Reline Kit 154 Disposable Suction Tubes ( Plastic ) 155 Applicator Sticks 156 Surgical Burs Straight Hand Piece Nstraight Fissure Hp703 Nstraight Fissure Hp558l N 157 Air Rotor Surgical Carbide Bur Nsmall Shaft Fg702 Nlong Shaft Fg703 Sl N 158 Acrylic Trimmer Tungsten Carbide Coated Burs For Surgical Use. 159 Standard Three Pin Sectional Expansion Screws – Upper. 160 Standard Two Pin Sectional Expansion Screws – Lower. 161 Type 3 Dental Stone For Orthodontic Use 162 Cartridges Containing Lignocain Hcl 2% And Adrenaline 1:80000 ( 1.8 Ml, Box Of 50 ) 163 Cartridges Containing Long Acting 4% Articaine And Adrenaline 1: 100000 ( 1.7 Ml, Box Of 50 ) 164 Needles For Anesthetic Dental Cartridges Syringe ( 30 G , 25Mm ) ( Box Of 100 Needle 165 Needles For Anesthetic Dental Cartridges Syringe ( 27 G , 35Mm ) ( Box Of 100 Needle ) 166 Topical Anesthetic Spray Containing 15% Lidocaine 167 Fibre Splint N ( Rebond Type ) N 168 Paper Points N ( 15-40 ) N ( 40-100 ) N 169 Zinc-Phosphate Cement Powder + Liquid ( Harward Type ) 170 Zinc-Polycarboxylate Cement ( Powder + Liquid Pack ) 171 Irm ( Powder + Liquid Pack ) 172 Nano Composite With Zirconia Fillers ( Light Cure ) N ( For Universal Applications Preferably ) N 173 Gic Luting Cement With Film Thickness Of 17 Microns, Powder + Liquid. 174 Self Cure Semi Permanent Crown Material , Over 400Mpa Of Strength In Cartidges 175 Chromatic Pit & Fissure Sealant 176 Cold Mold Seal 177 Silicone Rubber Based Impression Material ( Putty And Wash ) 178 Dispensing Gun ( To Dispense The Wash Material ) 179 Surgical Burs For Micro Motor Straight Hand Piece Hp 701 180 Reney Clip 181 Reney Clip Applicator 182 Rtr 183 Bio- Membrane 184 Laser Fiber - 300Μm Laser Fiber With Connection 185 General Purpose Cleaning Solution / Enzymatic Ultrasonic Cleaner 186 Impression Paste 187 Modelling Wax 188 Tma Wires ( Straight Length ) -.016*.022 And .017*.025 189 Ferric Sulphate Dental Haemostatic 190 Benzocaine Topical Anesthetic Gel 191 Dental Varnish 192 Sectional Matrix Bands 193 Plastic Wedges For Sectional Matrix System 194 Interproximal Guards To Protect From Cutting Of Interproximal Surface For Sectional Matrix System 195 Absolute Alcohol 196 Disposable High Profile Microtome Blade 197 Disposable Plastic Moulds 198 Paraffin Wax 199 Distilled Water 200 Acetic Acid ( Glacial ) 201 K-Files No.15 ( 21Mm ) 202 K-Files No.20 ( 21Mm ) 203 K-Files No.25 ( 21Mm ) 204 K-Files No.30 ( 21Mm ) 205 K-Files No.35 ( 21Mm ) 206 K-Files No.40 ( 21Mm ) 207 K-Files No.15 ( 25Mm ) 208 K-Files No.20 ( 25Mm ) 209 K-Files No.25 ( 25Mm ) 210 K-Files No.30 ( 25Mm ) 211 K-Files No.35 ( 25Mm ) 212 K-Files No.40 ( 25Mm ) 213 K-Files No.15 ( 31Mm ) 214 K-Files No.20 ( 31Mm ) 215 K-Files No.25 ( 31Mm ) 216 K-Files No.30 ( 31Mm ) 217 K-Files No.35 ( 31Mm ) 218 K-Files No.40 ( 31Mm ) 219 K-Files No.45 ( 21Mm ) 220 K-Files No.50 ( 21Mm ) 221 K-Files No.55 ( 21Mm ) 222 K-Files No.60 ( 21Mm ) 223 K-Files No.70 ( 21Mm ) 224 K-Files No.80 ( 21Mm ) 225 K-Files No.45 ( 25Mm ) 226 K-Files No.50 ( 25Mm ) 227 K-Files No.55 ( 25Mm ) 228 K-Files No.60 ( 25Mm ) 229 K-Files No.70 ( 25Mm ) 230 K-Files No.80 ( 25Mm ) 231 K-Files No.45 ( 31Mm ) 232 K-Files No.50 ( 31Mm ) 233 K-Files No.55 ( 31Mm ) 234 K-Files No.60 ( 31Mm ) 235 K-Files No.70 ( 31Mm ) 236 K-Files No.80 ( 31Mm ) 237 H-Files No.15 ( 21Mm ) 238 H-Files No.20 ( 21Mm ) 239 H-Files No.25 ( 21Mm ) 240 H-Files No.30 ( 21Mm ) 241 H-Files No.35 ( 21Mm ) 242 H-Files No.40 ( 21Mm ) 243 H-Files No.15 ( 25Mm ) 244 H-Files No.20 ( 25Mm ) 245 H-Files No.25 ( 25Mm ) 246 H-Files No.30 ( 25Mm ) 247 H-Files No.35 ( 25Mm ) 248 H-Files No.40 ( 25Mm ) 249 H-Files No.45 ( 21Mm ) 250 H-Files No.50 ( 21Mm ) 251 H-Files No.55 ( 21Mm ) 252 H-Files No.60 ( 21Mm ) 253 H-Files No.70 ( 21Mm ) 254 H-Files No.80 ( 21Mm ) 255 H-Files No.45 ( 25Mm ) 256 H-Files No.50 ( 25Mm ) 257 H-Files No.55 ( 25Mm ) 258 H-Files No.60 ( 25Mm ) 259 H-Files No.70 ( 25Mm ) 260 H-Files No.80 ( 25Mm ) 261 H-Files No.45 ( 31Mm ) 262 H-Files No.50 ( 31Mm ) 263 H-Files No.55 ( 31Mm ) 264 H-Files No.60 ( 31Mm ) 265 H-Files No.70 ( 31Mm ) 266 H-Files No.80 ( 31Mm ) 267 Niti Files No.15-40 ( 21Mm ) 268 Niti Files No.15-40 ( 25Mm ) 269 Niti Files No.45-80 ( 21Mm ) 270 Niti Files No.45-80 ( 25Mm ) 271 Gutta Percha Points No.15 272 Gutta Percha Points No.20 273 Gutta Percha Points No.25 274 Gutta Percha Points No.30 275 Gutta Percha Points No.35 276 Gutta Percha Points No.40 277 Gutta Percha Points No.45 278 Gutta Percha Points No.50 279 Gutta Percha Points No.55 280 Gutta Percha Points No.60 281 Gutta Percha Points No.70 282 Gutta Percha Points No.80 283 Barbed Broaches Size:21 Mm 284 Barbed Broaches Size:25 Mm 285 C+ Files No.6 286 C+ Files No.8 287 C+ Files No.10 288 C+ Files No.15 289 Gates Glidden Drills ( 1 To 6 ) Sizes 290 Paezo Reamers 291 Lentulo Spirals Size:21Mm 292 Lentulo Spirals Size:25Mm 293 Pathfinder Files No.10 ( 21Mm ) 294 Pathfinder Files No.10 ( 25Mm ) 295 Finger Pluggers ( #10-40 ) 296 Endo Blocks 297 Edta Solution 298 Root Canal Filling Removal Consisting Of Tetra Chloro Ethylene. 299 Radio Opaque Calcium Hydroxide Cavity Liner. N-Paste Of Ca ( Oh ) 2 Paste+Catalyst N N 300 Composite Finishing Kit 301 Composite Finishing + Polishing Kit 302 Mineral Trioxide Aggregate ( Mta ) 303 Granulated, High Density Glass Lonomer Powder+Liquid For Filling Purpose. 304 Prefabricated Metal Posts. 305 Glass Fibre Posts. 306 Dental Investment Material ( Phosphate Bonded ) 307 Porcelain Adjustment Kit 308 Green Tracing Sticks – Dental 309 Veined High Strength Heat Cure Acrylic Resin-Powder With Liquid. 310 Heat Cure Acrylic Resin 311 Cold Cure Acrylic Resin With Liquid Na ) Pink Nb ) Clear N 312 Metal For All Metal Crowns 313 Metal For Porcelain Fused To Metal 314 Porcelain Powder ( Different Shades ) N 315 Ceramic Finishing Burs. N 316 Die Lubricants. N 317 Disinfectant For Burs And Rotary Instruments. 318 Bio Degradable And Aldehyde Free Dental Chair Leather Upholstery Cleaner. 319 Bio Degradable And Aldehyde Free Fully Virucidal Instrument Disinfectant And Cleaner. 320 Round Stainless Steel Wires-Different Gauges ( 19, 20, 21, 22, And 23 ) . Nstandard Spool. N 321 Round Stainless Steel Wires-Different Gauges ( 19, 20, 21, 22, And 23 ) . Nlaboratory Spool. N 322 Dentin Replacement Composite 323 Bone Graft 324 Local Drug Delivery Agent Tetracycline Fibres N 325 Face Mask ( Petit Type ) 326 Chin Cup With Headgear 327 Thermoplastic Bioplast Rubber Sheets For Splints ( Different Sizes )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 7
37.
Defence #10566033 Price Bid
Tender For Additional / Alternator And Improvement To Smqs ( Phase- Iii ) At Afa Hyderabad; 1 Demolition Of Pcc In Roof Surfaces Including Existing Treatment And Demolition Of Pcc Under Sunken Floors Of Bathroom Including Floor Tiles Rooms Flooring Etc Of Any Description And In Any Position Not Otherwise Specifically Provided, Complete All As Specified And As Directed 2 Demolition Of Rcc Lintels, Chajja, Slab Cover, Beams Of Any Description And Height Upto 3M To 5M, Not Other Wise Specically Provided And In Simillar Works Complete All As Specified And As Directed 3 Removal Of Debris ( Aggregates Concrete, Rubble Etc Of Any Description ) Obatained From Demolition Including Loading And Unloading To A Distance Of 5.0 Km From The Starting Point And Deposited Where Directedcomplete All As Specified And As Directed.Note: One Load Equals To 0.62 Cum Of Aggregate / Concrete Debris / Rubble Etc. 4 M&L For Making Good With Cement Mortar 1:4 Under Cills Or Over Arches, Lintels And Bressummers, Including All Pinning When Necessary, At Any Height With Necessary Scafoldings Complete All As Specified And As Directed. 5 Demolition Of Brick / Stone Masonry Built In Cement Mortar Of Any Description, Complete All As Specified And As Directed 6 M&L For Pre-Cast Cement Concrete Block Masonry In ( 1:3:6 ) Type C1 ( Using 20Mm Graded Stone Aggregate ) With Solid Blocks Exc 10Cm In Width And Setting In Cement Mortar 1:4 In Walls / Parapet Walls Etcat Any Heightcomplete All As Specified And As Directed. 7 Taking Down Cement Plaster On Brick Or Stone Walls, Etc., Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc Complete All As Specifiedand Directed. 8 Cleaning The Roof Surfaces And Applying Oil Basedbitumen Primer @0.20 Kg Per Sqm, Providing4mm Thick App Modified Water Proofing Membrane Weight Not Less Than 4 Kg Per Sqm Reinforced With Non Woven Polyster Mat Weight Not Less 160 Gm Per Sqm Having Softening Point Not Less Than 140 Degree Centigrade, Longitudinal Tensile Strength Not Less Than 800N Per Sqcm Tearing Strenght Of 180N With Minimum Of 10 Cm Side Laps And 15 Cm End Laps By Application Of Torch, Applying A Coat Of Blown Grade Hot Bitumen Over The Membrane @ 1.20 Kg / Sqmas Per Manufacturer Instructionscomplete All As Specified And As Directed 9 M & L Cement Concrete ( 1:2:4 ) Typeb-1 Using ( 20Mm Graded Stone Aggregate ) In Haunching And Padding On Chajjas, Approchable / Unapprochable Areas Of Any Height, Complete All As Specified And As Directed 10 M&L For Applying One Coat Of Solar Reflective Bituminous Aluminium Paint Over Surface Of App Water Proofing Membrane @ 0.1 Kg / Sqm Complete All As Specified And As Directed. 11 Taking Up Or Downsteel Tubing And Connections Upto 25 Mm Bore For Refixing Or Removalcomplete All As Directed. 12 S&F 15 Mm Bore Steel Tubing Medium Grade Galvanised With All Fittings And Fixed Complete To Walls, Ceilings Or Laid In Floorscomplete All As Specified And As Directed. 13 S&F 20 Mm Bore Steel Tubing Medium Grade Galvanised With All Fittings And Fixed Complete To Walls, Ceilings Or Laid In Floors Complete All As Specified And As Directed. 14 Refixing Old 15 Mm Gi Tubing Obtained From Sl Item No 11Of Any Grade, Fixed With All Necessary Fittings / Connections In New Or Old Positions To Walls And Ceilings Or Laying In Floorscomplete All As Specified And As Directed. 15 Refixing Old 20 Mm Gi Tubing Obtained From Sl Item No 11 Of Any Grade, Fixed With All Necessary Fittings / Connections In New Or Old Positions To Walls And Ceilings Or Laying In Floors Etc Complete All As Specified And As Directed. 16 Cutting Chases For Concealed Water Tubing In Brick Or Stone Walls Or Concrete Surfaces And Making Good To Facings Where Required And Pointing In Cement Mortar 1:3, Cutting Not Exc 10 Cm Girthcomplete All As Specified And As Directed. 17 M&L For Pcc 1:2:4 Type B0 ( Using 12.5Mm Graded Stone Aggregate ) Average 25 Mm Thick With Water Proofing Compond As Per Manufacturers Instructions, Finished Even And Fair In Bottom Portion Of Sunken Floor Portion . Complete All As Specified And As Directed. Note : ( Wpc Will Be Measured & Paid Separately Under Relevant Item ) 18 M&L For Rendering 15Mm Thick In Cm 1 : 3 On Fair Faces Of Brick Or Concrete Surfaces Mixed With Water Proofing Compound As Per Manufacturers Instructions Finished Even And Smooth In Sunken Portion Withoutusing Extra Cement Etc Complete As Specified And As Directed. Note :Wpc Will Be Measured & Paid Separately Under Relevant Item 19 M&L For Applying A Uniform Coat Of Blown Grade Bitumen 85 / 25 @ 1.20 Kg Per Sqm Conforming To Is 702 Over A Coat Of Bituminous Primer @ 0.70 Kg Per Sqm And Over That Provision Of Water Proofing 3Mm Thick App Based Polymeric Membrane Of Weight Not Less Than 3 Kg Per Sqm Reinforced With Polyster Non Woven Fabric ( Wt Not Less Than 150 Gms / Sqm ) Laid On Prepared Surface By Forced Application As Per Manufacturers Instructions In Sunken Floorcomplete All As Specified And As Directed. 20 M&L For Pcc ( 1:5:10 ) Type E2 ( Using 40Mm Graded Stone Aggregate ) In Foundationfilling And Mass Concrete Complete As Specified And As Directed.. 21 Supply Only Intergral Water Proofing Compound As Per Manufacturers Instructions Complete All As Directed. 22 M&L For 40 Mm Dia Gi Pipe As Spouts In Sunken Floors, Medium Grade Complete All As Specified And As Directed 23 Dismantling Floor Hearth Or Existing Wall Tiling Incl Cement Mortar Bedding ( But Not Backing ) Including Removal Of Debris From The Site, Complete All As Specified And As Directed 24 M&L Joint Free Non Skid Ceramic Coloured Tiles Of Premium Quality 7 To 8 Mm Thick, ( Square / Rectangular ) , Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Colour Tiles, Laid Over And Including Screed Bed In Cm ( 1:6 ) 10 Mm Thick Complete All As Specified And Directed. 25 M&L Joint Free Glazed Coloured Ceramic Tiles Of Digital Quality In Vertical Surfaces Of Dados Skirting Etc450x300x7-8Mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, Laid Over And Including Backing Coat / Renderingin Cm ( 1:4 ) 10 Mm Thick Complete All As Specified And Directed. ( Note: Colour Of Tile Will Be Finalized By Engr-In-Charge ) 26 M&L For Roughening Surfaces Of Old Concrete Floor By Picking, Hacking For Keys, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. For Preparation For Tilingand Spreading & Laying Of Cera Bond Chemical @ 6 Kg / Sqm For Fixing Floor Tiles Complete All As Specified And As Directed 27 M&L For Joint Free Glazed Colour Tiles Of Premium Quality 7 To 8 Mm Thick, ( Square / Rectangular ) , Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match The Colour Tiles, Laid Over And Including Screed Bed In Cm ( 1:6 ) , 10Mm Thick Complete All As Specified And Directed. 28 All As Per Item No 27 Above But In Vertical Surfaces Of Dados, Skirtings Etc Laid Over And Including Backing Coat / Rendering In Cm ( 1:4 ) 10Mm Thickcomplete All As Specified And As Directed. 29 S&F Of 20 Mm Thick Granite Work ( Table Rubbed And Polished ) Black Coloured, Cooking Platform And Like In Cement Mortar ( 1:4 ) Including Pointing In White Cement ( 1:2 ) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite , Laid Over And Including Screed Bed 15 Mm Thick In Cm ( 1:6 ) Complete All As Specified And As Directed. 30 M&L Rounding To Edges Of Stone Slabs One Edge, In Cooking Plotforms Complete All As Specified And As Directed. 31 M & L For Rendering 15 Mm Thick In Cement Mortar 1:6On Fair Faces Of Brick Work Or Concrete Surfaces At Any Height With Neccesary Scafoldings, Finished Even Smooth Withoutusing Extra Cement. 32 M & L Forexternal Rendering 15 Mm Thick Cement Plaster In Two Layers 5Mm Thick In Cm 1:4 With Wpc / Liquid As Per Manufacturers Instruction Over 10 Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfacesat Any Height With Neccesary Scafoldings, Finished Even Smooth Withoutusing Extra Cement Note :- ( Wpc Will Be Measured & Paid Separately Under Relevant Item ) 33 M & L For Rendering 10 Mm Thick In Cement Mortar 1:4 On Ceilings & Soffits Of Stair Case Waist Slab, Beam Bottom, Etc, Ofconcrete Surfacesat Any Height Including Neccesary Scafoldings, Finished Even And Smooth Without Using Extra Cement.All As Specified And As Directed. 34 Preparation Of Newly Plastered Internal Wall Surface And Applyingtwo Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Priming Paint Over A Coat Of 3Mm Thick Wall Care Putty Complete All As Specified And As Directed 35 Preparing Newly Plastered External Wall Surfaces And Applying Two Coats Of Cement Based Paint Over A Coat Of Cement Primer, Complete All As Specified And As Directed. 36 Preparingnewly Plastered Surfaces Of Ceiling And Applying Three Coats White Washcomplete All As Specified And As Directed. 37 S&F In Repairs Of Vitreous China Wash Basin, White, Flat Back, Size 580X450mm Excluding Taps, Waste Chain And Plug And Porcelain Stopper But Including Brackets Complete All As Specified. 38 S&Fof Waste Coupling Of32 Mm Chromium Plated For Glazed Ware Basins With Long Screwed Shanks And Fly-Nuts Complete All As Specified And As Directed. 39 S&F Of Pillar Taps 15 Mm Dia, Cast Copper Alloy Long Nose, Chromium Platedfancy Typescrewed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Fly-Nuts, Screwed For Iron Pipe Of 15 Mm Bore Complete All As Specified And As Directed. 40 S&F In Repair Of Bib Taps, Cp Fancy Typescrewed Down, Screwed For Iron Pipe Or For Brass Ferrule Andfixed To 15Mm Bore Pipecomplete All As Specified And As Directed 41 S&F In Repairs Of Stop Valves / Angle Cocks 15Mm Dia Cpfancy Typescreweddown High Pressure Screwed Both Ends For Iron Pipe Or For Unions, Of 15Mm Borecomplete All As Specified And As Directed. 42 S&F In Repairs Of Stop Valves ( Concealed Type ) 15Mm Dia Cpfancy Type Screweddown High Pressure Screwed Both Ends For Iron Pipe Or For Unions, Of 15Mm Bore Complete All As Specified And As Directed. 43 S&F In Repairs Of Vitreous China Squatting Pan, Orissa Pattern Of Size 580 X 440Mm, White With Integral Foot Rest Including Trap And Set In Concrete P Ors Trap As Per Site Requirements Including Making Good To Floor Complete All As Specified And Directed By Engr -In- Charge. 44 S&F In Repair 10 Lts Pvc Valveless, Syphonic Action Type, Flushing Cistern, Low Level, White, With Inlet, Ball Valve, Float And Handle Including Brackets For Fluslhing Cistern And Connections To Pipes Including Long Bends Complete All As Specified And As Directed. 45 S&F In Repairs Of Pvc Waste Pipe 32 Mm Bore, 900 Mm Longcomplete All As Specified And Directed By Engr -In- Charge. 46 Supply And Fix In Repairs, Pvc Connection 15 Mm Bore With Brass Cp Nuts, Of Length 450 Mm Complete All As Specified And As Directed. 47 S&F High Density Polyethylene Pipes 32Mm ( Hdpe ) With Collar Of Pressure Rating 6 Kgf / Cm2 Fixed Complete To Walls, Ceilings Or In Floors Etc.Complete All As Specified And As Directed. 48 S&F In Repairs For 15 Mm Dia Gun Metal Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And As Directed. 49 S&F In Repairs For 20 Mm Dia Gun Metal Gate Valve With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And As Directed. 50 S&F In Repairs For 125 Mm Cp Shower Rose, Fancy Type With Cp Arm, All As Specified And As Directed 51 S&F In Repair Of Stainless Steel Gratings 100Mm Dia, Hinge Or Openable Type, Fixed With Suitable Solvent Cement Etc Complete All As Specified And As Directed. 52 S&F Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long, Complete All As Specified And As Directed 53 Supply And Fix In Repairs Stainless Steel Sink With Drain Board Of Overall Size 915Mmx460mm Bowl Size 410Mmx330mmx160mm With Draining Board Made Out Of Stainless Steel 1 Mm Thick For Kitchenwith Plugs, Washers And Waste Pipe Including Cast Iron Cantilever Bracketsand Connecting To Union / Pipe Complete All As Specified And As Directed. 54 S & F In Repairs Brass Cp Fancy Tubular Towel Rail Of 20 Mm Dia, D Type 600 Mm Long Between Flanges, Including Brackets Complete All As Specified And As Directed. 55 S&F Pvc Cabinet Of Size 585X290x215, Complete All As Specified And As Directed. Cat No; Cc-252 Ofpearl Precision Products Or Equivalent In Prayag Or Equivalent Approved By Ge. 56 S&F Dish / Plate Display Rack Stainless Steel Hand Made - Wall Hangingof Cat No. P.336 Pf Prayag Or Equivalent ( Approximte Size 600Mm X 900Mm X 250Mm ) , Complete All As Specified And As Directed. 57 S&F 5Mm Thick Bevelled Edge Looking Mirror Of Size 600X450mm, Of Selected Quality, Including Fixing To Walls With Catch Nuts, Complete All As Specified And As Directed. 58 Taking Down Eaves Gutters And Rainwater Pipes ( Any Size Or Pattern ) , Including All Fittings, Heads, Shoes, Bends, Swan-Necks, Etc., Including Cleaning Or Refixing Or Removal To Store ( Measured Overall As Fixed Along The Centre Line Over Fitting And Accessories ) Complete All As Specified And As Directed. 59 S & F110 Mm Bore Pvc ( Swr ) Pipes Type BSingle Socketed, In Any Lengthfixed To Walls Or In Floors, Ceiling Etc Complete All As Specified And As Directed. 60 S & F75 Mm Bore Pvc ( Swr ) Pipestype B Single Socketed, In Any Length Fxed To Walls Or In Floors, Ceilingcomplete All As Specified And As Directed. 61 S & F 110 Mm Dia Bore Pvc ( Swr ) Bends, Any Radius With Oval Access Door, Complete All As Specified And As Directed. 62 S & F110 Mm Dia Bore Pvc ( Swr ) Bends, Any Radius, Complete All As Specified And As Directed. 63 S & F75 Mm Dia Bore Pvc ( Swr ) Bends, Any Radius With Oval Access Door, Complete All As Specified And As Directed. 64 S & F 110 Mm Bore Pvc ( Swr ) Vent Cowl, Complete All As Specified And As Directed. 65 S & F 110 Mm Bore Pvc ( Swr ) , Junction Single, ( Single T ) Equal Or Unequal With Access Door, Complete All As Specified And As Directed. 66 S&F In Repair Of Cast Iron Nahani Trap Of 75Mm Size With Cp Grating Including Jointing To Waste Pipe Fixed In Cement Concrete Type B1 ( 1:2:4 ) , Including Taking Down Existing Of Any Descriptioncomplete All As Specified. 67 S&F In Repair Of Cast Iron Floor Trap Of 100 Mm Size With Cp Grating Including Jointing To Waste Pipe Fixed In Cement Concrete Type B1 ( 1:2:4 ) , Including Taking Down Existing Of Any Descriptioncomplete All As Specified. 68 S & Fin Repairs Salt Glazed Stoneware Gully Trap, P Type 150X100mmmm, Including Taking Down Existing Of Any Descriptioncomplete All As Specified And As Directed. 69 Complete Removal Of The Existing Treatment On Walls And Applying Three Coats Of White Wash Including Preparation Of Surfaces Complete All As Specified And Directed By Engineer-In-Charge. 70 Complete Removal Of The Existing Treatment On Ceilings And Applying Two Coats Of White Wash Including Preparation Of Surfaces Complete All As Specified And Directed By Engineer-In-Charge. 71 M&L For Complete Removal Of The Existing Old Treatment On Walls And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Primer Over 3Mm Thick Wall Care Putty, Including Preparation Of Surfaces Complete All As Specified And Directed By Engineer-In-Charge. 72 M&L For Complete Removal Of Existing Painting On Old Plastered Or Unplastered Surfaces On Wallsincluding Cornices By Applying Two Coats Of Cement Based Paint Over A Coat Of Cement Primerall As Specified And Directed By The Engineer-In-Charge. 73 M&L For Complete Removal Of Existing Painting On Old Plastered Or Concrete Facia / Cornice Surfaces And Applying Two Coat Of Santex Matt Painting Over A Coat Of Primertcomplete All As Directed. 74 M & L For Preparing Old Painted Wood And Wood Based Surfaces Of Any Description, Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint All As Specified And Directed By Engineer-In-Charge. 75 M & L For Preparing Old Painted Steel And Iron Surfaces Of Any Description, Not Otherwise Described Applying One Coat Of Synthetic Enamel Paint All As Specified And Directed By Engineer-In-Charge. 76 M & L For Preparing Old Painted Steel And Iron Surfaces, Plain Or Moulded, N Exc 10Cm Width Or Girth When Unconnected With Other Painting Or When Painted In A Different Tint, Not Otherwise Described Applying One Coat Of Synthetic Enamel Paint All As Specified And Directed By Engineer-In-Charge. 77 S&F Rotational Moulded Pvc Water Storage Tanks Of 500 Ltrs Capacity ( Cylindrical Vertical With Closed Top ) , Threelayered, Hoisted And Fixed In Positionincluding Out Let And Inlet Connections Including Dismantling Existing Water Tanks Of Capacity 500 Litres, All As Specified In Ssr Part–I And As Directed.. 78 S & F20 Mm Dia Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Rod & High-Density Plastic Ball Screwed For Iron Pipe ( Minimum Weigh 210 Gms ) Complete All As Specified And As Directed. 79 S&F Stainless Steel Tubular Curtain Rails 20Mm Diacompleteall As Specified And As Directed 80 S&F 20Mm Dia Fancy Type Brass Chromium Plated Curtain End Finials, Completeall As Specified And As Directed 81 S&F Stainless Steel Brackets Suitable For 20Mm Dia Curtain Rails, Etc Completeall As Specified And As Directed 82 Taking Down Chowkats Or Steel Window / Door Frames With Shutters ( Without Taking Off Shutters From Frames ) Not Exc 1.5 Sqm Each Complete All As Specified And As Directed. 83 Taking Down Chowkats Or Steel Window / Door Frames With Shutters ( Without Taking Off Shutters From Frames ) Exc 1.5 Sqm But Not Exc 4 Sqm Each Complete All As Specified And As Directed. 84 Taking Down Shutters Of Any Description Of Area Exc 1.0 Sqm But N Exc 2 Sqm Each Complete All As Specified And As Directed. 85 M & Lpcc 1:2:4 Type B1 Using 20 Mm Graded Aggregate For Bed Blocks For Securing Hold Fast And The Like Including Weathering, Sligtly Rounded Or Chamfered Angles And Throating, With Necessary Formwork Complete All As Specified And As Directed. 86 S & F Pressed Steel Frames 105X60mm Size Made With 1.25 Mm Thick Sheet , For Doors With Singlerebates Including Necessary Fixing Lugs, Lock Strick Plate, Etc, Complete All As Specified. 87 S & F Pressed Steel Frames 125X60mm Size Made With 1.25 Mm Thick Shee For Doors With Double Rebates Including Necessary Fixing Lugs, Lock Strick Plate, Etc, Complete All As Specified. 88 M&L For Pcc 1:3:6 Type C0 ( Using 12.5Mm Graded Stone Aggregate ) As In Filling Of Hollow Portion Of Pressed Steel Framecomplete All As Specied And As Direceted. 89 S & F 30Mm Thick Factory Made Flush Shutters, Solid Core Construction, With Block Board Core And Ply Wood Face Panels, Commercial Type On Both Sides Complete All As Specified And As Directed. 90 S & F35 Mm Thick Factory Made Second Class Hardwood Glazed / Gauzed And Skeleton Door Shutters , Open Rebated And Prepared To Receive Glass, Gauze, Mesh Etc With Sash Bars Divided Into Squares With Plain Chamfered Or Rounded Mitred Beads For Securing Glass Etc, Size Of Members Of Shutters As Specified In Ssr Part I Section 8, Clause 8.24 ( A ) And Fixed To Chowkats Complete All As Specified And As Directed. 91 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Aluminium Three Track Sliding Windows Of Approximate Size 2000Mm X 1200Mm Made Out Of Anodised Aluminium Extruded Section Outer Frame With Gutter 92X45.5X1.50Mm And Shutter Section 40X18x1.50Mm Fully Glazed Including 5Mm Thick Sheet Glass, Rubber Gasket, Aluminium Beading, Suitable Fancy Type Handles, Locking Device, Rollers And All Other Required Hardware Fittings As Per Standard Engg. Practice, Complete All As Specified And Directed. 92 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Aluminium Two Track Sliding Windows Of Approximate Size 115Mm X 1200Mm Made Out Of Anodised Aluminium Extruded Section Outer Frame With Gutter 61.85X45.5X1.50Mm And Shutter Section 40X18x1.50Mm Fully Glazed Including 5Mm Thick Sheet Glass, Rubber Gasket, Aluminium Beading, Suitable Fancy Type Handles, Locking Device, Rollers And All Other Required Hardware Fittings As Per Standard Engg. Practice, Complete All As Specified And Directed. 93 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Aluminium Ventilators Of Approximate Size 600Mm X 800Mm, Top Hung Type Made Out Of Anodised Aluminium Extruded Section Of Thickness Not Less Than 1.50 Mm, Including 5 Mm Thick Tinted Glass, Suitable Aluminium Hinges, Aluminium Tower Bolts, Rubber Gasket, Aluminium Beading, Suitable Fancy Type Handles, Peg Stay And Including All Other Required Fittings As Per Standard Engg. Practice, Complete All As Specified And Directed. 94 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Anodised Aluminium Frame For Windows And Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And As Directed. 95 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Anodised Aluminium Window Shutters, Side Hung Type Without Sash Bars, Aluminium Sections Weighing 0.55 Kg / M Including Necessary Joining Cleats, Glazing Clips, Rubber Packing, Anodised Aluminium Snap Beading, Screws, Anodised Aluminium Fittings Such As Peg Stays 150Mm Long ( 1 No. ) Hinge Type B-21 100Mm Long ( 2 No. ) Suitable Handle ( 1 No. ) Complete All As Specified And As Directed. 96 S&F 4.80Mm Thick Sheet Glass, Ordinary Quality, In Squares Exc 0.5 Sq. M Each Pane And Fixed To Aluminium Frames Or Shutters Of Any Description Complete All As Specified And Directed By Engr In Charge. 97 S&F Powder Coated ( Thickness Not Less Than 50Micron ) Aluminium Anodised Grill, Aperture N Exc 75 Mm , Size 6Mm X 4Mm Thick, Including 1 Mm Thick F Or H Section Channelsfixed With Steel Screws Complete All As Specified And Directed. 98 S&F Stainless Steel Wire Cloth, 0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm And Fixed With Stainless Steel Wire Staples, Complete All As Specified And As Directed 99 S&F In Repair Ms Framed Work Such As In Grills And Framed Guard Bars For Windows / Ventilators With Ends Of Bars Shouldered And / Or Riveted, Or Forged Into Spikes Etc And Similar Work Conforming To Fe 290, Gde E 165 Etc Complete All As Specified And As Directed 100 S&F Solid Pvc Frame ( Single Rebated ) Of Size 60Mm X 30Mm Made Out Ofsolid Pvc Foam With Homogeneous Fine Cellular Structure Having Smooth Outer Integral Skin With Suitable Metal Stiffner And Fixed With 100 X 8 Sheet Metal Csk Screws Complete All As Specified And As Shown On Drawing. ( Note:- Door Frame Shall Be Water Proof, Termite Proof, Elegant And Should Have Excellent Screws Holding Strength To Fix Hinges And Hold Doors Properly For A Long Life ) All As Specified And As Directed 101 S&F Factory Made Solid Pvc Profiled Panel Door Shutter 28Mm Thick With Integral Skin As Frame & 3Mm Thick High Pressure Compact Laminate On Both Side Of Approved Colour As Infill, With C Type Gi Or 40 X 20 X 19 Of Ms Pipe As Stiffner & Supplying & Fixing In Frame At Site As Per Specificationsall As Specified And As Directed 102 Taking Down Shutters Of Any Description Exc1 Sqm But N Exc 2 Sqm And Refixing The Same In Same Openings After Repairing Or Cutting Bottom As Per Site Requirement, Complete All As Specified And As Directed 103 S & Fbutt Hinges Of 100Mm Size, Medium Weight Cold Rolled Mild Steel And Fixedcomplete All As Specified And As Directed. 104 S & F Butt Hinges Of 100Mm Size, Extruded Aluminium Alloy With Galvanised Mild Steel Hinge Pin, Anodised, Type C-21 Complete All As Specified And As Directed. 105 S & F150mm Long Extruded Aluminium Alloy Handles, Cast Type Anodised Complete All As Specified And As Directed. 106 S & F Tower Bolt 150Mm Long, Extruded Aluminium Anodised Complete All As Specified And As Directed. 107 S & F 300Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple ( Bolt Type ) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Specified And As Directed. 108 S & F 300Mm Long Mild Steel Ordinary Rat And Tail Rod Pattern Springs, Including Roller And Roller Plate Complete All As Specified And As Directed. 109 S&F50 Mm Size Butt Hinges, Medium Weight, Cold Rolled Mild Steel Complete All As Specified And As Directed. 110 S&F Second Class Hardwood Small Fittings Such As Brackets Of Any Type, Latch And Hinge Blocks, Shaped Door And Window Stops And The Like, Including All Necessary Labours; Articles N Exc 200 Cu. Cm Each Complete All As Specified And As Directed. 111 S&F 150Mm Long Floor Door Stopper Of Aluminium Alloy Body And Tongue, Anodised, With Hard Drawn Steel Spring. Fixed In Floor, Etc Complete All As Specified And As Directed 112 Running Welding In Repairs Of Thickness Of Metal N.Exc 6 Mmcomplete All As Specified And As Directed. 113 M & L Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described, Over 10 Cm Width Or Girth And Applying Two Coat Of Synthetic Enamel Paint ( Ordinary Tint ) Over A Coat Of Pink Primer, Complete All As Specified And Directed. 114 M & Lfor Preparation And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxideprimer On Newly Treated Steel Surfaces Of Any Description, Not Otherwise Described Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 115 Demolition Of Cement Concrete In Ground Floors And Pavings N.Exc 15 Cm Thick Above Or Below Ground Level, Complete All As Specified And As Directed.. 116 M&L For Hardcore Of Gauge N Exc. 63 Mm Of Broken Stone Boulders, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed. 117 M&L 75 Mm Thick Cement Concrete In Sub Base To Pavings, Type D2 1:4:8 ( 40 Mm Graded Aggregate ) Complete All As Specified And As Directed 118 M&L 75 Mm Thick Cement Concrete, Type B-1, 1:2:4 ( 20Mm Graded Aggregate ) As In Pavings, Finished Even And Smoothwithout Using Extra Cement, Complete All As Specified And As Directed 119 Forming Construction Joint 30Mm Deep X 10Mm Wide Filled With Sealing Compound Of Grade A, Complete All As Specified And As Direceted. 120 M&L 75 Mm Thick Plain Cement Concrete 1:3:6 Type C2 Using 20Mm Graded Stone Aggregate As Inplinth Protection Etc., Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 121 Complete Removing Of Plants Including Roots By Dismantling / Cuttings Etc. Of Brick Work / Pcc / Rcc Including Necessary Scaffolding, Any Type, Any Location / Height ( I.E Roof, Parapet Walls Near Pipes Etc. ) And Applying Conc Acid After Removing Roots For Preventing The Regrowthing And Making Good The Disturbed Portion Using Pcc 1:2:4 Type B-O And Plaster In Cm 1:3 ( Size Of Disturbed Portion 150 X 150 X 150Mm ) Complete All As Specified & Directed By Engr- In -Charge. 122 M&L For Cleaning The Spalled Concrete Covers, Exposed Reinforced Corroded Bars With Water And Applying Two Coats Of Zinc Rich Anti Corrosive Coat On Bars And Then Replaster The Same With Cement Mortar 1:4 Of Average Thickness Of 40Mm, All Around With Wpc On Ceilings & Soffits Of Stair Case Waist Slab, Beams Ofconcrete Surfacesat Any Height With Neccesary Scafoldings, Finished Even And Smooth Without Using Extra Cement With Necessary Bonding Agent As Directed. Make: Build Core Chemicals, Stp Limited, Dr.Fixit Or Equivalent Approved By Ge. 123 M&L For Taking Down Existing Pointing Of Any Description Including Racking Out Joints, Hacking For Keys, Scrubbing Down With Water And Providing Raised Pointing To Old Stone Walls Surfaces Of Any Description, With Necessary Scaffoldings, By Using Cement Mortar 1:3 Complete All As Specified And As Directed. 124 M&L In Repair Second Class Hard-Wood In Scantlings, Clean Sawn, Fixed To Existing Chowkats Or To Walls, Complete All As Specified And As Directed 125 M&L For Second Class Hardwood Plain Fillets In Cub Boards, Shelves, Etc Exc 13 & N. Exc 25 Sq. Cm, Square, Rectangular Or Triangular In Section, Clean Sawn, Secured With Nails Or Brads, , Complete All As Specified And As Directed 126 M&L For Second Class Hardwood Plain Fillets In Cub Boards, Shelves, Etc Exc 6 & N Exc 13 Sq. Cm, Square, Rectangular Or Triangular In Section, Clean Sawn, Secured With Nails Or Brads, , Complete All As Specified And As Directed 127 M&L 18Mm Thick Marine Plywood Of First Grade , Fixed With Screws As In Cupboards, Sides Of Shelves, Partitions And In Simillar Works, All As Specified And As Directed.. 128 M&L 12Mm Thick Marine Plywood Of First Grade , Fixed With Screws As In Cupboards, Sides Of Shelves, Partitions And In Simillar Works, All As Specified And As Directed.. 129 M&L For 0.9 Mm Thick Decorative Laminated Sheet Type 1 Of Surface Finish Coloured Andpattern As Approved And Fixed Over Plywood With Approved Adhesive All As Specified. 130 M&L For External Teak Wood Lipping, 6Mm Thick, Fixed With Nails 19Mm Wide.Complete All As Specified And As Directed 131 S&F Brass Continuous ( Piano ) Hinges, Width Of Flap 30Mm Bright Finish Or Electrogalvanised, All As Specified And As Dierected. 132 Supply And Fix 100Mm Long Extruded Aluminium Alloy Handles, Cast Type Anodised Complete All As Specified And As Directed. 133 S&F In Repairs Of 100Mm Aluminium Anodised Hasp And Staple, Safty Type, With Hinge Pin Including Bolt To Hinge Plate And Fixed With Screws Etc Complete All As Specified And As Directed. 134 S&F Tower Bolt 100Mm Long, Extruded Aluminium Anodised Complete All As Specified And As Directed. 135 Excavating In Trenches N. Exc 1.5 M Width And N. Exc 1.5 M In Depth For Foundation Or Cesspits , Manholes , Pier Holes Etc N Exc 10 Sqm On Plan And N Exc 1.5 M In Depth Orgetting Out Soft / Loose Soil, Complete All As Specified And As Directed. 136 Demolition And Breaking Up Drain / Sewage Pipes 150 Mm Dia, ( Salt Glazed Ware, Ac Or Reinforced Concrete ) Set In Concrete Mortar, Complete All As Specified And Directed. 137 Cutting Holes Into Or Through Stone Wall Built In Cement Mortar Or Cement Lime Mortar And Walls Of Cement Concrete, Of Superficial Area Exc 400 Sq. Cm But N. Exc. 0.10 Sqm, Complete All As Specified And Directed. 138 Returning Filling In , Including Spreading , Levelling, Watering And Well Ramming In Layers N Exc 25 Cm In Soft / Loose Soil, Complete All As Specified And As Directed. 139 Removing Excavatedmaterialto A Distance Exc 1.50 Km But N Exc 5 Km Distance And Depositing Where Directed At A Level N.Exc 1.5Mm Abovethe Starting Pointcomplete All As Specified And As Directed. 140 M&L For Pcc 1:4:8, Type D-2 ( Using 40Mm Graded Stone Aggregate ) For Concrete Bed Of 10Cm Thick, To Drain Pipes Of 150 Mm Dia, Including Packing Under, And Hunching Against The Sides Of Pipes After They Are Laid And Tested, Complete All As Specified And As Directed. 141 M&L For 150 Mm Dia Pipe ( Grade ‘A’ Pipe ) Salt Glazed Stone Ware Drain Pipes Laid In Trenches And Jointed In Cm 1:3 Complete All As Specified And Directed. 142 Cutting Into Existing Manholes For Connecting New Drain Of 150 Mm Dia, Making Good To Pipes And Rendering, Cutting Out Existing Benching For And Forming Branch Channel ( 1 / 2 Round Or 3 / 4 Section ) In Cement Concrete 1:2:4 Type B-1, Smooth Finished, And Reforming Benching As Required, Complete All As Specified And As Directed. 143 M&Lproviding Precast Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate ) In Landing, Cover Slabs Manholes, Chullah Hoods , Chajjas , Water Troughs , Shelves And Similar Articles With Plain Faces Set In Cement Mortar 1:4, Complete All As Specified And Directed. Note: Reinforcement Shall Be Measured Sepreatly 144 S&F Mild Steel Tmt Bar 6Mm To 8Mm Dia, Cut To Length , Bent To Shape As Required, Including Cranking, Bendingspirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire ( Annealed ) Not Less Than 0.9 Mm Dia.Complete All As Specified And Directed. 145 Taking Down The Unserviceablepoint Wiring ( Light, Fan, Socket Or Power ) Complete With Fittings Such As Switches, Sockets Ceiling Roses Pendent Regulators, Sockets Etc Any Light Points And Making Good Disturbed Surfaces Of Walls And Floorscomplete All As Specified And Directed. 146 Taking Down Unserviceable Mcbs, Dbs, Main Switches Complete All As Specified And Directed. 147 Removing The Existing Metering Board Panel From Theexisting Wall After Removing The Existing Serviceable Electric Metersall As Specified And Directed.Note- Serviceable Electric Meter To Be Fixed In The New Panel Board. Item No- 148 148 Supply, Installation, Testing & Commissioning Of Indoor Type, Wall Mounted ( With Bolts And Nuts ) Meter Cabinet Of Size 1.5X1.2X0.2Mtr And Made Out Of 2Mm Thick Crca Ms Sheet With Front Door Having Glass Window For Viewing Kwh Meter And Other Doors Shall Be Opaque. All Door Sholud Have Neaprene Rubber Gasket And Locking Arrangements. The Cabinet Shall Be Painted Both Internally And Externally With Powder Coated Paint ( Shade : Ral 7032 Siemens Grey ) . The Cabinet Shall Be Dust And Vermin Proof With Degree Of Protection Ip 43. The Cabinet Shall Be Comprising With The Following Accessories:- 149 ( A ) Four Pole Mccb, 100Amps With Breaking Capacity Of 16Ka Having Adustable Thermal And Fixed Magnetic Release. ( B ) Aluminium Bus Bars For 3-Phase & Nuetral Of Current Carying Capacity Up To 200Amps Dully Mounted On Frp / Dmc Insulators And Necessary Drillingfor Connections And Duly Covered With Heat Shrinkable Pvc Sleeves Of Standard Colour Code. ( C ) Mcb Spn 32Amps, 10Ka - 5Nos. ( 04Nos For Meters, 01 For Spare ) ( D ) Mcb Spn 10Amps-01 ( 1 For Security Lights & Stair Case ) ( E ) Analog Type Timer Up To 10Amps Capacity Single Phase 230Voltage For Building Security Lights & Common Lights ( F ) Two Way Bakelite Connector With Nut, Bolts And Wahsers Suitable For Connecting The Outgoing Wires In The Cabinet - 6Nos ( G ) Fixing Of Old Serviceable Electric Meters Obtained From The Old Meter Panel Board. ( H ) Internal Wiring Of Meters / Mcb / Cable Connector Shall Be Carried Out With10sqmm Copper Conductor Unsheathed, Multistranded, Pvc Insulated, 1100Volts Grade, Single Core Cable Of Standard Colour Code For Phase & Neutral Including Necessary Lugs / Nuts / Bolts / Washers Etc. ( J ) Led Phase Indicating Lamps ( Ryb ) With Control Mcb ( Sp-2Amps ) - 3Nos.Taking Down Ceiling Fan / Exhaust Fan, Dismantling Blades And Removing Fan And Refixing Ceiling Fan / Exhaust Fan After Completion Of Re-Wiring And Connecting Up By Cleaning / Oiling Etc Including Provision Of 3Core Flexible Round Cable From Ceiling Rose Or Connector To Fan All As Directed. 150 Taking Down Ceiling Fan / Exhaust Fan, Dismantling Blades And Removing Fan And Refixing Ceiling Fan / Exhaust Fan After Completion Of Re-Wiring And Connecting Up By Cleaning / Oiling Etc Including Provision Of 3Core Flexible Round Cable From Ceiling Rose Or Connector To Fan All As Directed. 151 M&L For Point Wiring With 1.5 Sqmm Copper Conductor Unsheathed, Multistranded, Pvc Insulated, 1100Volts Grade, Single Core Cable With Earth Continuity Conductor Of 1.5 Sqmm Pvc Insulated Copper Conductor And Including Rigid Pvccondit Or Pvc Conduits / Casing Caping Of Suitable Size Withaccessories Fixed Orconsealed In Stone Walletc., Including Terminal Boxes Made Out Of 1.2Mm Thick Ms Sheet For Switches, Fan Regulators Socket Outlet Etc Along-With 3Mm Thick Top Laminated Bakelite Sheet For Housing Switches, Sockets, Regulators Etcfor One Light Point Controlled By One One Way 5 Amps Switch 152 Note ( I ) : Necessary Pvc Rigid Junction Boxes For Identifying Junction As Required On Site / Directed By Engr-In-Charge For Point Wiring Work With Pvc Dummy Plates Shall Deemed To Be Included In The Quoted Rate. 153 ( Ii ) Same Size Wire Shall Be Used For Phase, Neutral & Earth Conductor 154 ( Iii ) The Wiring Shall Be Done Strictly By Following Proper Colour Coding Using Red, Yellow And Blue For Phase, Black For Neutral And Green For Earth Leads. 155 All As Per Item No 151 Above But One Light Point Controlled By Two, Two Way 5 Amps Switch 156 All As Per Item No151above But One Ceiling Fan / Exhaust Fan Point Controlled By One 5 Amps Switch 157 All As Per Item No 151Above But Socket 5 Amp On Independent Board. 158 All As Per Item No 151 Above But One 3 / 5 Pin Socket Out Let5 Amp On Same Board With Other Switches. 159 All As Per Item No 151 Above But One Bell / Buzzer Controlled By One 5 Amps Push Button Switch. 160 All As Per Item No 151 Above Butwiring With 2.5 Sq Mm Copper Cable With 2.5 Sq Mm For One Earth Continuitycablefor 6 Pin 15 Amps Socket Out Controlled By 15 Amps Switch.Complete All As Specified And As Directed. 161 Supply And Fixswitch Socket Combination 5 A / 15 Amps 5 In 1, Multipurpose Flush Type, Isi Markedcomplete All As Specified And As Directed. 162 Supply And Fixswitch Socket Combination 2 In 1, 5 Pin 5 Amps, Multipurpose Flush Type, Isi Markedcomplete All As Specified And As Directed. 163 Supply & Fixing Socket Outlet 3 / 5 Pin 5 Amp Flush Type Isi Markedcomplete All As Specified And As Directed. 164 Supply And Fixswitch Piano Flush Type, Single Pole, One Way, 5 Amps, 230 Volts, Isi Markedcomplete All As Specified And As Directed. 165 Supply And Fixswitch Piano Flush Type, Single Pole, Two Way, 5 Amps, 230 Volts, Isi Marked Complete.Isi Markedcomplete All As Specified And As Directed. 166 Supply And Fixbell Push , 5 Amps, 230 Volts, Isi Markedcomplete All As Specified And As Directed. 167 S&F Ceiling Rose, Three Terminal, Pvc / Polycarbonate, Isolated Body, Isi Markedcomplete All As Specified And As Directed. 168 Supply And Fix Bell Multi Music Type Ac 230 V Complete All As Specified And As Directed. 169 S & F Stepped Type Electronic Fan Regulator Flush Type All As Specified And As Directed. 170 Supply & Fixing Angle Holder / Batten Holder Insulated Complete All As Specified And As Directed. 171 S&F Surface Mounting / Wall Mounted Led Tube Light Fitting 1X18 To 20Wattshigh Efficiency, Anti Glare, Maintenance Free Operation Including Led Driver And Mounting Arrangements, All Accessories Internally Pre-Wired, Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable White Colour With Suitable Size All As Specified And Directed By Engineer-In-Charge. 172 S&F Surface Mounting / Wall Mounted Led Tube Light Fitting 1X10wattshigh Efficiency, Anti Glare, Maintenance Free Operation Including Led Driver And Mounting Arrangements, All Accessories Internally Pre-Wired, Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable White Colour With Suitable Size All As Specified And Directed By Engineer-In-Charge. 173 Supply & Fixing 1X10w Led Bulkhead Fitting Housing With High Pressure Die Cast Alluminium, Poly Carbonate Front Diffuser Cover Including Led Driver, Lamp Andall Accessories Internally Pre-Wired, Connecting Up With Twin Core Twisted Flexible Copper Conductor Cable White Colour With Suitable Size Including Taking Out Old Unserviceable One Complete All As Specified And Directed By Engineer-In-Charge. 174 Supply And Fix Gi Pipe Light Grade Brackets 40 Mm Dia, 1.5 M Long Bent To Shape As Required And Fixed With Suitable Size Of 02 Nos Ms Clamps Made Out Of Flat 25Mm X 4Mm Duly Drilled With Nuts, Bolts, Washers Etc., To Poles / Walls Complete All As Directed. 175 Supply And Fixled Street Light Fitting 1 X 30 Watt Led Pressure Die Cast Aluminum Housing Heat Resistant Toughened Glass With Frame , Ip - 66 Protection, Uniform Distribution Make:-Cromptoncat Part No:- Lsto-30-Cdl Or Equvalent ( Suitable For 40 Mm Outer Dia G I Pipe ) And Connecting Up .Complete All As Specified And As Directed. 176 M&L For Sub Main Wiring Pvc Insulated Cable 2 Single Core 10Sq Mm 1100 V Grade ( Nominal Area ) Single Core Pvc Insulated Unsheathed Cable Multi-Stranded Copper Conductor Drawn Through And Including Medium Grade, Rigid Non-Metallic Pvc Conduit / Casing & Capping Of Suitable Size With All Necessary Fittings, Concealed In Walls / Roof / Floor Duly Earthed With One Run Of Single Core Cable Of Same Size But Green In Colour As Continuous Earthing Wire And Connecting To Common Earth Dolly Complete And After Taking Out The Existing Sub-Main Wiringetc. Complete All As Specified And Directed By Engineer-In-Charge. 177 Note ( I ) : Necessary Pvc Rigid Junction Boxes For Identifying Junction As Required On Site / Directed By Engr-In-Charge For Point Wiring Work With Pvc Dummy Plates Shall Deemed To Be Included In The Quoted Rate. 178 ( Ii ) Three Runs Of Cable And One Run Of Conduit With Necessary Accessories Will Be Measured As One Unit Length. 179 ( Iii ) The Wiring Shall Be Done Strictly By Following Proper Colour Coding Using Red, Yellow And Blue For Phase, Black For Neutral And Green For Earth Leads. 180 M&L For Sub Main Wiring Pvc Insulated Cable 2 Single Core 6Sq Mm 1100 V Grade ( Nominal Area ) Single Core Pvc Insulated Unsheathed Cable Multi-Stranded Copper Conductor Drawn Through And Including Medium Grade, Rigid Non-Metallic Pvc Conduit / Casing & Capping Of Suitable Size With All Necessary Fittings, Concealed In Walls / Roof / Floor Duly Earthed With One Run Of Single Core Cable Of Same Size But Green In Colour As Continuous Earthing Wire And Connecting To Common Earth Dolly Complete And After Taking Out The Existing Sub-Main Wiringetc. Complete All As Specified And Directed By Engineer-In-Charge. 181 Note ( I ) : Necessary Pvc Rigid Junction Boxes For Identifying Junction As Required On Site / Directed By Engr-In-Charge For Point Wiring Work With Pvc Dummy Plates Shall Deemed To Be Included In The Quoted Rate. 182 ( Ii ) Three Runs Of Cable And One Run Of Conduit With Necessary Accessories Will Be Measured As One Unit Length. 183 ( Iii ) The Wiring Shall Be Done Strictly By Following Proper Colour Coding Using Red, Yellow And Blue For Phase, Black For Neutral And Green For Earth Leads. 184 M&L For Sub Main Wiring With Two Runs Of 1.5Sq Mm 1100 V Grade ( Nominal Area ) Single Core Pvc Insulated Unsheathed Cable Multi-Stranded Copper Conductor Drawn Through Medium Grade, Rigid Non-Metallic Pvc Conduit / Casing & Caping ( As Per Site Requirement ) Of Suitable Sizewith All Necessary Fittings, Surface In Walls / Roof / Floor Duly Earthed With One Run Of Single Core Cable Of Same Size But Green In Colour As Continuous Earthing Wire And Connecting To Common Earth Dolly Complete All As Specified And Directed By Engineer-In-Charge. ( For Bldg Security Light ) 185 Note:- ( I ) Necessary Pvc Dummy Plates & Pvc Rigid Junction Boxes For Identifying Junction As Required On Site / Directed By Engr-In-Charge Shall Deemed To Be Included In The Quoted Rate. 186 ( Ii ) The Wiring Shall Be Done Strictly By Following Proper Colour Coding Using Red, Yellow And Blue For Phase, Black For Neutral And Green For Earth Leads. 187 ( Iii ) Three Runs Of Cable And One Run Of Pvc Conduit / Casing Caping Will Be Measured As One Uint. 188 Supply And Fix Sheet Metal Enclosure Single Door Mcb Db2 Way With 240V Rated Without Busbar Complete All As Specified And Directed By Engineer-In-Charge. 189 Supply And Fix Sheet Metal Enclosure Double Door Mcb Db Spn 8 Way With 100 A Rated Bus Bar & Neutral Link Complete All As Specified And Directed By Engineer-In-Charge. 190 S & F Mcb Spn 6 To 32A, 10 Ka Rupturing Capacity Complete All As Specified And Directed By Engineer-In-Charge. 191 S & F Mcb Sp 6 To 32A 10 Ka Rupturing Capacity Complete All As Specified And Directed By Engineer-In-Charge. 192 M&L For Earthing Complete With Gi Earth Plate Electrode Of Size 600X600x6.6 Mm Thick Buried Directly In Ground With Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level Connected To Gi Wire 4 Mm Dia Earth Lead By Means Of Nuts, Bolts, Check Nuts, Washers Of Galvanised Iron As Steel, Protected By Galvanized Iron Pipe 40Mm Bore ( Medium Grade ) Allas Directed Including Cement Concrete ( 1:3:6 ) Type C-1 Earth Pit With Precast Rcc ( 1:1.5:3 ) Type A-1 Cover Slab Of Size 42 X 42 X10cm Thick Reinforced With 8Mm Dia Tmt Bars @ 15 Cm C / C Both Ways With 10Mm Dia Mild Steel Round Bar Of 30 Cm Long, Bent To Shape As Lifting Handle, Funnel, Wire Mesh, 20 Mm Bore Galvanized Iron Pipe ( Medium Grade ) For Watering, Earth Testing Point, Charcoal Or Coke And Salt In Alternate Layers With Necessary Earth Work In Soft / Loose Soil Complete All As Shown In Electrical Plate No 3 Of Ssr Part I Including Testing On Completion All Complete As Specified And Directed After Taking Down Old Earthing. ( Gi Wire Upto 7.5M Including Testing Consider In This Item ) . 193 Note: ( I ) Cost Of Gi Earth Wire And Gi Protection Pipe Upto 7.5Mtr Length Shall Be Deemed To Be Included In The Rate Quoted For This Item. ( Ii ) The Unit Rate Shall Also Includes For Wire Mesh, Funnel, Excavation, Returninng & Filling, Pcc Chamber Pit, Rcc Cover & Test Point ( Iii ) Pcc Pit Shall Be Provided At Least 500Mm Away From The Earth Pit And Not Just On The Earth Pit 194 M & L Sand Covering / Cushioning For Underground Cable Protection All As Specified In Ssr Part- I And Punning Down Complete All As Specified And Directed By Engineer-In-Charge.Note: Punned Thickness Shall Be Measured 195 M&Lfor Burntbricks Sub ClassB Laid Perpendicularover & Cushioning For Cable Protectioncomplete All As Specified & Directed At Site By The Engr- In Charge. 196 Supply And Lay Lt Ug Cable, Xlpe Insulated Armoured, Heavy Dutyaluminium Conductor Multistranded, 1100Volts Grade, Of 16Sqmm X 4Core Cross Sectional Area Laid In Trenches / Fixing On Walls / Poles Or Passing Through Gi Pipe Including Connecting Up With Suaitable Lugs, Nuts And Bolts Wherever Required And Testing Complete All As Specified. 197 Supply And Fix Cable Gland Double Compression Type, Weather Proof For 4Core 16Sqmm Armoured Cable Complete All As Specifed And Directed By Enginner-In-Charge. 198 Taking Out Old Unserviceable Cable, Lt 1100V 10Sqmm 2 Core From The Trench After Taking Necessary Shutdown From The Oh Lt Supply And Making Good The Disturbed Surfaces As Per Existing Complete All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 7
38.
Heavy Industries and Public Enterprises #10547140 Price Bid
Tender For Turnkey Works For Setting Up Of Amrit Pharmacy At Uttar Pradesh University Of Medical Sciences, Saifai, Etawah, Up; 1 CIVIL WORKS 2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 4 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 5 Filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size). 7 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 8 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) 9 Reinforced cement concrete work in column, beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 10 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto floor V level including plinth. Thermo - Mechanically Treated bars of grade Fe-500D or more 11 Centering and shuttering including strutting, propping etc. and removal of form for all heights: 12 Foundations, footings, bases of columns, etc. for massconcrete 13 Lintels, beams, plinth beams, girders, bressumers and cantilevers 14 Columns, Pillars, Piers, Abutments, Posts and Struts 15 Suspended floors, roofs, landings, balconies and accessplatform 16 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 17 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 18 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 19 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer 20 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 21 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour. Two coats 22 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 23 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats of Enamel Paint all complete. 24 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 25 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood 26 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 27 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm 28 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 29 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 30 Providing and fixing bright finished brass handles with screws etc. complete: 125 mm 31 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 32 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately). 33 Providing and fixing of frameless glass door SS Patch Lock with out handle in toughened glassincluding all necessary screws etc. complete. 34 Providing and fixing both side 2 nos SS H handle having min 450 mm length in toughed glass door including all necessary screws etc. complete. 35 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) including skirting with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc.,complete:Size of Tile 600x600 mm 36 Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement counter opening and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge 37 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 38 ACP : Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding over Aluminium rectangular tube of minimum size 50x25x2mm, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics including all required & complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in Sqm. up to two decimal places. 39 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover 40 Providing and fixing ball bearing for rolling shutters. 41 Extra for providing mechanical device chain and crank operation for operating rolling shutters.Exceeding 10.00 sqm and upto 16.80 sqm in the area 42 Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. 43 12 mm cement plaster finished with a floating coat of neat cement ofmix :1:3 (1 cement: 3 fine sand) 44 Furniture Works 45 Double Level Counter:Providing and fixing Double Level Counter, first step at 750 mm from ground, 900mm wide and Counter top at 1100 mm level and 300 mm wide. 12mm thick acrylic sheet (pure white in colour) to be used for counter top on 25 mm thick prelaminated commercial ply. Display unit with 8mm thick toughened glass fascia and 18mm thick prelaminated shelves to be in built in counter with movable shutter. Counter should contain retractable keyboard trays and partitioned drawers with drawer channel, cupboard units with swing door and auto close hinges. Drawers and cupboard are to be fixed with individual locks and handles. Cable manager and leg space are also to be provided.150mm high SS glossy skirting all Complete as per the design and instructions of engineer in charge. 12mm thick toughened glass partition to be provided above counter up-to roof height with necessary counter opening. Note: Only front elevation of wooden counter will be measured. (12mm thick toughened glass will be paid separately). Make laminate: GREENLAM, MARINO or equivalent. 46 Counter Height Stools :Supply and installation at site counter height stools of following specifications :Revolving adjustable Chrome plated steel body chairs with resistance to the corrosion.Cushion Seat with Lift mechanism for Adjustment of height. Minimum height 750mm before expansion. Medium Back rest and arm rest. Item shall be of reputed make. 47 Table: Supply and errection of Working Table 900mm length X600mm depth X750mm height made with 18mm thick prelaminated particle board with one side decorative and other side balancing lamination and all edges to be fixed with matching PVC edge beeding. Partitioned storage unit having swing door ,Partitioned cash drawer, Key board drawer and leg spaceare also to be provided with individual locks and handles, autoclose hinges, drawer channels etc. complete as per the aproved design andinstructions of engineer in charge. 48 Chair: Supply and errection of Medium back ergonomic chair with five nos. Star shaped Nylon base. Castors: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment and backrest height adjustment. Fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric. Upholstery: Heavy duty rubber backed fabric in BLACK. 49 Medicine display shelf: Providing and fixing of Open Wooden display laminated cabinets of length 900mmX height 2500mm made up of Pre-laminated MDF Board, exterior Grade-I 18 mm thick confirming to IS: 14587 with decorative lamination on both side with proper provision of racks and shelves.Bottom storage unit of 600mm deep storage shall be 750mm from the ground with display wooden shelves @150mm C/c. Upper storage unit provided with display wooden shelves @150mm C/c and 450 mm deep and height of 1750mm from the bottom storage unit. All the edges to be finished with edge band and shelves to be fixed with proper bracket holders complete as per approved layout, drawings and instruction of Engineer in Charge. Note: Only front elevation will be measured. 50 Over Head Storage Cabinet: Providing and fixing ofOver head storage cabinet ofdimension 900mmX600mmX450mm made up of Pre-laminated MDF Board, exterior Grade-I 18 mm thick confirming to IS:14587 with decorative lamination on both side including inside middle partitions and with sliding door on front side with rollers, sliding channels, handles, locks etc. All the edges to be finished with edge band and shelves to be fix with proper bracket holders complete as per approved layout, drawings and instruction of Engineer In Charge. Note: Only front elevation will be measured. 51 Slotted Angle Racks : Supply and errection of Powder coated slotted angle metalic rack having min 6 shelfs made up ofmin 40 X 40 X 2 mm size rolled steel angle posts shall have 8-mm diameter holes provided at 50-mm centre to centre.Metal shelves shall be made from mild steel sheets not less than 1.0 mm in thickness and with sufficient stiffners. Shelves shall have lipped flangeswidth of flange being 30 mm and depth of lip 15 mm .Min size of rack 900mm Length X 400mm Depth X 2000mm Height. 52 Airport Chair, 3 Seater: Supply and erection of Airport Chair (Set Of 3 In 1) having overall dimension ofLength 1720mm x width 675mm x height 850mm. Chair dimension floor to seat height 400mm and floor to arms height 600mm seat and back frame size Length 495mm x width 490mm x height 550 mm. Chair arms is made up of Stainless Steel Tube 50mm X 25mm Oval Shapes Tube 1.6mm thickness. Legs are made to 48mm Stainless Steel round Tube 2mm thickness and seat and back frame made to 19mm Stainless steel round tube 1.2mm thickness. Seat and back use to 1.2mm thickness perforated Stainless steel sheet. All the end cups are made to stainless steel glossy finish cups and using for the floor levellers 10mm nylon adjustable bush. 53 DISPLAY WORKS 54 Backlit Acrilic Board with projected channel letters: Supply, installation, testing and commissioningof weatherproof backlit acrilic board with projected channel letters made upof 20mm thick acrilic board and having box depth of min 100mm in approved size and design with reqired LED strips for high glow light. The board shall be fabricated and fixed over suitable welded and painted 25X25X3mm MS angle frame in suitable location and in proper line and level with all necessary fastners, supports etc. Electrical works likes electrical wirings, connections, fittings, externaly fixed weather proof 2/3 pin plug points and sockets including boxes etc. to be complete properly. All fabrication and fixing should be done as per approved design and instructions of Engineerin Charge. (Note: Only front elevation will be measured.) 55 Vinyl TransparentVision Glass Stickers: Supply and pasting of Vinyl Transparent Vision Glass Stickers in approved size and design in glass partition and door as per the instruction of Engineer in Charge. 56 PVC flex board: Supply and fixing of PVC flex board in approved size and design including all the required steel frames and fixings as per the instruction of Engineer in Charge. 57 Providing & sticking/pasting of printed vinyl wall stickersas per approved size anddesign at all heights includes all the required as per the instruction of Engineer in Charge. 58 CAPITAL/SUPPLY ITEMS 59 Supply,Installation,testingandCommissioning of Desktop computers with following specification. Processor:12th or Higher Gen Intel® Core™ i5 - (30 MB cache, 16 cores) Memory:16 GB: 2 x 8 GB, DDR5 Video Card: Intel® Graphics Storage:1 TB, M.2 2230, PCIe NVMe, SSD, Class 35 OS: Windows 10/11 Pro English Chassis:Mini Tower, Wired Multimedia Keyboard and Mouse Integrated Wireless LAN Integrated Gigabit LAN Monitor 21.5 LED or higher. Make : Dell / HP or equivalent 60 SITC of All in One PC Client PC Configuration, BRAND (DELL/HP)12th Gen Intel® Core™ i3-12400 (18 MB cache, 4 cores, 8 threads, 2.5 GHz to 4.5 GHz Turbo), memory *8 GB: 1 x 8 GB, DDR5, Storage:512 GB, M.2 2230, PCIe NVMe, SSD, Class 35, OS: Windows 11 Pro English, Multimedia Wired Keyboard, Optical Mouse, 2 USB 3.2 Gen 1 ports, Integrated Wireless LAN, Monitor 21.5 LED or higher. 61 LaserjetMultifunctionalMonochromeNetwork Printer: Supply and Installation at site, All in One LaserjetMultifunctionMonochromePrinter havingLCDDisplay,withfunctionstocopy, print and scan, print resolution 600 dpi x 600 dpi, 20ppmprintspeed,Dutycycleminimum8000 pages per month, 24 bit depth, USB, Wi-Fi connectivity.Make:hp/brother/canon/epsonor equivalent, for Bill Printing cum Office use with Warrantyperiodofoneyear.Connectivity:Hi- speedUSB 3.0Supported,Wi-Fi,Media Types: Paper, envelopes, labels, cardstock, transparencies, postcards, Functionality: Print, Scan/Copy.Power Consumption:Maximum 250 WattsRecommended Make : hp/brother/canon/epson or equivalent 62 Laserjet Monochrome Network Printer : Supplyand Installation at site, Laserjet MonochromePrinterhavingLCDDisplay,with functions to copy and print, printresolution 600 dpix600dpi,20ppmprintspeed,Dutycycle minimum8000pagespermonth,24bitdepth, USB,Wi-Ficonnectivity.Make: hp/brother/canon/epson or equivalent 63 Visi Cooler / Pharmacy refrigerator : Supply, errection and commisioning of lab / pharmacyrefrigiratorasperfollowing specifications:UprightShowcase Coolers/refrigerators with Single Glass Door and Lock having 350-450 Litre capacity, Temperature range capability 1-10 degree celsius with Digital TemperatureControllerandDisplay,Minimum of 4 adjustable Shelves/Racks Recommended Make:CELFROST,BLUESTAR,VOLTAS, THERMO FISCHER 64 Cash Counting Machine cum Fake Note Detector Make : Optimus-Model No.OLC 04 or equivalent 65 CashSafe(Coffer)Volume.14LMin WallThickness: 2.5 mm min for body and 5 mm min for door Recommended Make: Godrej make, ModelNo.PremiumCofferBRN(ltemCode: SEBP1112) or equivalent (only manual lockinq system) 66 CounterCommunicationSystem:Supply, installation, testing and commisioning of two way countercommunicationsystemincluding speaker,mike,controlunit,powerunitetcall required (make : Ahujaccs 2300 or equivalent) 67 WaterDispenser:Supplyanderrectionofwater dispensercanhold20litrewaterbottlehaving normalstanding designwith14liter refrigerator atbottom andhaving3temperaturetapshot, plain and cold. 3 liter cooling and 5 liter heating capacity per hour. Body made of ABS plastic and tankmadeofFoodgradestainlesssteel.Heavy duty bottle piercer with bottle holder. withmin 1 year warranty. (Make : voltas / Blue star/ equivalent) 68 Supply of ABC Type fire extinguisher of 2 Kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 69 Electrical Work 70 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C 71 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Recommended Material : Polycab, RR Kabel, V Guard, Havells) 72 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.( Recommended Material : RR Kabel/National/ Ralison/RKG/ Finolex / Polycab / Havells) 73 2 x1.5 sq.mm + 1x 1.5 sq. Mm earth wire 74 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 75 2 X 6 sq. mm + 1 X 6 sq. mm earth wire meter 76 Supplying and fixing 3 pin 5 A ceiling rose on the exising junction box / wooden block including connections as required. 77 S/F light plug point modular type accessaries : Supplying and fixing suitable size GI box with modular plate and cover in fronton surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc as required, 78 S/F Power plug point with modular type switch : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 and 15/16 amps modular switch, connection,painting etc as required. 79 S/F 20A SPN MCB industrial socket outlet : Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. 80 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door 81 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator):12 way, Double door. 82 S/F C series, MCB : Supplyingand fixing5 amps to 32 amps rating, 240/415volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioningetc. as required. 83 Single pole 84 Single pole and neutral 85 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A 86 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 16 sq mm with factory made clamp including cable termination 87 Supply, Installation, testing & commissioning of branded best qualityThree phaseelectronic type energy meter with LCD display with battery back up.withall connections complete, Make:L&T or Equivalent . 88 S/F C series, MCB : Supplyingand fixing5 amps to 32 amps rating, 240/415volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioningetc. as required. Triple pole 89 Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A 90 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps 91 Supply,installation,testingandcommissioningofthe following types oflight fittings with all accessorieson false ceiling, true ceiling or wall as directedand giving connectionswith 16/0.20 mm 3 core PVC insulated andsheathedroundcopperconductorflexwireor extendingthe original wiring and giving connectionsas required. All recessed type fixtures are to be supportedindependentlywith chains or GI wire anchoredto the ceiling with anchoring bolt of necessary size. All loose wires above the false ceiling are to be neatly concealed by flexible metal/pvc conduits.( cost to include lamps & all consumables also) 92 Supply and installtion of 30-36W, 230V, 4300 lumen, Recessed Square LED Cool White light fixture of dimession 600mm X 600mm on false ceiling along with all accessories with intergrated driver THD<10% and connections as well as making good the damages as required at site Engineer. Recommended makes: Philips/Crompton/Wipro or equivalent. 93 Supply and installtion of LEDtubelight of6000K and 20-24W on wall or ceiling as directedand giving connections as required.All loose wires are to be neatly concealed. (Make: Philips, Wipro, Crompton or equivalent) 94 Supply and installtion of 10-15W, 230V, Recessed Square or Round LED Cool White light fixture on false ceilling along with all accessories with intergrated driver THD<10% and connections as well as making good the damages as required at site Engineer. Recommended makes: Philips/Havells/Wipro or equivalent. 95 Supply, Installation, testing and commissioning of wall mount fan (400mm sweep), adjustable speed. min 60 degree oscillation, swing, Adjustable upward and downward tilt mechanism, Protective Guard, Including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, mounting accessories, etc. as required. It shall be double ball bearning type. (Make: USHA, Cromption ,Havells) 96 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 97 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. 98 Network / LAN 99 S/F Modular boxes, base & cover plate : Supplying and fixing 1 or 2 module ( 75 mm x 75 mm), GI box along with modular base, cover plate for modular switches in recess etc as required. 100 Providing and Fixing of RJ-45 socket outlet in the existing modular box with connections and all required. 101 16Port Network Switch :Supply, Installation, testing and commissioning of: 10/100 Mbps 16-Ports Gigabit Switch . ( Make : D-Link DGS-1008A) 102 Supplying,drawing and crimping with all accessories of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable from Port Switch to Data socket 103 Supply, installation, testing and commissioning of best quality cat-6 patch cord having1 metre length complete as per specifications as required. 104 Supply, installation and commissioning of powder coated DVR 4U Wall Mounted ServerRack ofISO Standard of size 550 x 350 x 140 mmhaving depth adjustable mounting slots, top and bottom Panel with ventilation and cable entry facility, provision to mount the cooling fans on the top panel, lock and key etc. and having capacity to carry a max Load of 60 kg all complete as per the manufacturer specifications and instructions of Engineer In Charge. 105 CCTV 106 Supply, Installation, Testing & Commissioning ofIndoor IR Dome night vision cameras :2.0 MP, 0.1 lux, Resolution 720 P ,AWB/ BLC/ AGC,min 20m range, Built-in IR illumination, white color case, PAL-CE/FCC approved. Make: CP PLUS/HIKVISION/Honeywell or equivalent 107 Supply, Installation, Testing & Commissioning of Outdoor IR Bullet night vision camera :2.0 MP,0.1 lux, Resolution 720 P,AWB/ BLC/ AGC ,min 20m range, Built-in IR illumination, white color case, DC12V, PAL-CE/FCC approved. Make: CP PLUS/HIKVISION/Honeywell or equivalent 108 Supply ,Installation ,Testing & commissioning of SMPS Power supply unit for above camera as speficied by camera manufacturer -12VDC 10A 109 Supply ,Installation ,Testing & commissioning of Digital Video Recorder : 8-Channel Embedded HD DVR, 400fps, Real-time, with 2 TB HDD and English OSD, 230VAC. Rate shall be inclusive of all accessories, termination of cables, etc complete. 110 Supply ,Installation ,Testing & commissioning of 15 to 16LED Color Monitor. make :LG / Samsung/ Equivalent. 111 Supply and Laying ofCoaxial cable 2+1 RG59/RG6 premium quality CCTV power and video cable with ISI marked PVC conduit including terminations with suitable BNC Connector, power Jack etc complete. 112 AC 113 Inverter Air Conditioner: Supply, installation, testing and commissioning of Air Cooled Cassette Air Conditioner of following capacity consisting of indoor room unit with cordless remote control and one number outdoor condensing unit comprising of enegy efficient suitable rotary compressorfor operation on single phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation and fixing of room unit on ceiling, standard 3 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room& condenser as per site conditions, comprising of 1 or 2 dia drain PVC pipe with insulation 3m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigarant gas, suitable stabilizer etc complete as required. ( Make : Voltas , Blue Star, LG, Samsung, Carrier,Hitachi ) :Minimum 3TR 3 star rated as per BEE 114 Supply and Installation of additional copper piping, cabling and drain piping for air conditioning unit with proper insulation including all required on wall/above false ceiling complete
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 5
Uttar Pradesh View Result →
39.
Power #10523064 Price Bid
Tender For Misc. Civil Maintenance & Repair Work In Admin Block,Mess & OfficerS Ac Hostal Building Block-Catelectricity Trainning Institute Sarojani Nagarlucknow - Laying and Jointing PVC Pipe. Heading 2 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 3 Providing and laying in position cement concrete of 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - All work up to plinth level, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 4 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 5 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 6 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 7 Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto/above plinth level, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 8 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 9 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 10 Brick work with Cement mortar 1:4 (1 cement : 4 coarse sand) &common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 11 Half brick masonry with Cement mortar 1:4 (1 cement :4 coarse sand) & common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up ton floor V level,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 12 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels,Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 13 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 14 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 15 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters,35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 16 Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete ,75x60x3.10 mm, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 17 Providing and fixing ISI marked oxidised 200x10 mm M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 18 Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 19 Providing and fixing ISI marked oxidised 250x20x6 mm M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 20 Providing and fixing ISI marked oxidised 100 mm M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 21 Providing and fixing special quality bright finished brass 40mm cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 22 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 23 Providing and fixing PTMT handles with necessary screws etc. complete.150x34x24 mm weighing not less than 26 gmsthe work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 24 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 25 Providing and fixing factory made panel 30 mm thick pre laminatedPVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC C channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturers specification & drawing. 26 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (Hot finished welded type tubes).,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 27 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 28 40 mm thick with 20 mm nominal size stone aggregate Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 29 18 mm thick Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 30 Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 31 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.., complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 32 Providing and laying vitrified floor tilesin different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.(600mmx600mm) 33 Providing and laying Vitrified tilesin different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 34 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.(Size 600mm x 600mm) 35 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles,included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 36 Providing corrugated G.S. sheet roofing (0.80 mm thick with zinc coating not less than 275 gm/m²)including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, ,included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 37 Providing and fixing on wall face 110 mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 38 Providing and fixing on wall face 110mm unplasticised - PVC moulded Coupler for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 39 Providing and fixing on wall face 110mm unplasticised - PVC moulded Single tee with door for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 40 Providing and fixing on wall face 110mm unplasticised - PVC moulded Bend 87.5° for unplasticised Rigid PVC rain water pipes, included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 41 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. 42 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand)the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 43 12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand)the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 44 20 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 45 12 mm Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 46 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 47 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications,Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 48 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 49 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 50 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 51 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately), the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 52 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 53 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (One Coat),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 54 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 55 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (One or more coats on old work),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 56 Painting with aluminium paint of approved brand and manufacture to give an even shade (One or more coats on old work),the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 57 Polishing on Old wood work with ready made wax polish of approved brand and manufacture the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 58 Finishing walls with Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 59 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.(With Cement Mortar 1:4 (1 cement , 4 coarse sand) 60 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 61 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 62 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. 63 Providing & fixing White vitreous china water closet squatting pan (Indian type) (Orissa pattern W.C Pan of size 580x440 mm) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 64 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malbathe work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 65 Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 66 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 67 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge. 68 Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 69 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead ,Of area 3 sq. metres and below, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 70 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 71 Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of (G.S. Sheet) 72 Dismantling 15 mm to 40 mm nominal bore G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge . 73 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 74 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 75 Providing and laying 60mm faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. 76 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 77 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (Old CC paver blocks shall be supplied by the department free of cost). 78 Providing and laying matt finished vitrified tile of size 300x300 or approved by E/I having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 79 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 80 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mmincluded cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 81 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 82 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make (a) 15 mm nominal dia included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 83 Providing and fixing 32 mm flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 84 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 85 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 86 Providing and fixing 15 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (Internal work - Exposed on wall) . 87 Providing and fixing 25 mm Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge (Internal work - Exposed on wall) . 88 Providing and fixing 15 mmChlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc).. 89 Providing and fixing 25 mmChlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Concealed work, including cutting chases and making good the walls etc).. 90 Providing and fixing 65 mm G.I. pipes complete with G.I. fittings including trenching and refilling etcthe work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 91 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. (25 mm to 40 mm Nominal Bore) 92 Providing and fixing 65mm gun metal gate valve with C.I. wheel of approved quality (screwed end) , the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 93 Providing and fixing 25mm ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 94 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe (45 cm length) with brass unions, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 95 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 96 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 97 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 98 Providing and fixing 15 mm C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 ,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 99 Providing and fixing 15 mm C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge 100 Providing and fixing aluminium work for For fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)) 101 Providing and fixing aluminium work for For Shutter of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)) 102 Providing and fixing glazing With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.. (Cost of aluminium snap beading shall be paid in basic item). 103 Providing and fixing double action hydraulic floor spring With stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 104 Filling the gap in between aluminium frame (Upto 5mm depth and 5 mm width) & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 105 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours,(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 106 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compoundconsisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entiretreatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge. 107 Providing, mixing and applying bonding coat of Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. 108 Providing and fixing in place a full height storage cabinet 450 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only. 109 2.5 cm thick 1:1.5:3 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. (without base CC). 110 Cleaning of septic tank including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work. 111 Providing and fixing sun-film of Gareware or equivalent make on glass panes of door and window shutters including cost of all materials,labour and T&P etc. required for proper completion of the work. 112 Attending to petty maintenance service like plumbing service,welder service, mansion service and carpenter service required as below. (Job attending by one no. Plumber/welder/mason /carpenter with one no. helper per hour or part of an hour.) 113 S/F of Waste Coupling Jaquar or Equivalent Model No-ALD-705L130 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 114 Supply and fixing of Health Faucet Jaquar or Equivalent Model ALD-573 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 115 Supply and fixing wall hung WS with normal closed seat cover Jaquar or Equivalent Model CNS-WHT-959JSPP as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 116 S/F ofBib Cock jaquar or Equivalent Model No-CON-047KN or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 117 S/F of jaguar make flushing plate jaquar or Equivalent ModelNo-CHR 152415 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 118 Providing and fixing soap dish chromium plated with brackets fixed to wooden cleats with brass screws including supply of all materials,labour and T&P etc.required for proper completion of the work. 119 Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe including cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 120 Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe BENDincluding cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 121 Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe SOCKETincluding cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 122 Providing and laying 110 MM SWR, PVC ( Finolex or equivalent ) pipe Plain TEEincluding cost of excavation, C.C etc including its jointing and connection, all materials, labour and T&P etc. required for proper completion of the work. 123 Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havells or equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge. 124 Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. 125 Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work. 126 Supply of labor (Mazdoor) for sifting furniture, T&P & Otherrequired for proper completion of the work. 127 Supply and fixing 100 mm PVC Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. 128 Providing and fixing 100 mm dia PVC P or S trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.). 129 Repairng ofold cushioned Single seater Sofa removing of old damage upholstery as required then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, . The work include cost of all labour,material T&P required for proper completion of work as approved by the Engineer -in-Charge. 130 Repairng ofold cushionedThreeseater Sofa removing of old damage upholstery as required then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of Sofa using 50 mm thick sleepwell foam 32 denstry, The work include cost of all labour,material T&P required for proper completion of work as approved by the Engineer -in-Charge. 131 Providing and fixing superior,approved quality cotton curtain height approximately 2.65mtr upper side margin 0.05mtr, lower side margin 0.02 mtr, upper side margin fitted proper tape for hanging curtain with the help of hooks and rings Lucknow as per direction of Engineer in charge. The work includes cost ofall labour, material and T&P etc. 132 Repairing of old cushioned officer chair at, removing of old damage upholstery as Requied then wooden frame repairing and re-polishing, upholstery of new 75 mm thick sleepwell foam 32 denstry on seat and back side of chair using 50 mm thick sleepwell foam 32 denstry, The work includes cost ofall labour, material and T&P etc. 133 Providing & Fixing of Roller Blinds kazage make or equivalent of approved shade as per drawing & specificationas approved by the Engineer -in-Charge. 134 Providing and fixing4.0 mm thicknes ACP in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item). 135 Providing ,making & Fixing of 6mm PVC Wall Panneling on wall surface includingsupply of all materials,labour and T&P etc. required for proper completion of the work. 136 Supply and Fixing of 8 mm Table top Glasswith edge polish,the work included cost of labour, material T&P etc for proper completion of work. 137 Providing& making& fixing of Wall Panneling as per drawing from claded with 12mm water proof & Fire Retardent ply & final surface to be finised with 6 mm thickMDF & 1mm Laminate complete with painted or polishedas per the approved desin all complete as per drawing, specification and direction as approved by E/I. 138 Supply and Fixing of Basin Trap with regular swinging spout(wall mounted Spout)jaquar or Equivalent Model FLR-CHR -5347 or as approved By engineer incharge,the work included cost of labour, material T&P etc for proper completion of work. 139 Existing old damage Tile and Fixing Newfalse ceiling with 12mm thick Arm strong Fire resistant gyp board false ceiling system of approved type fixed to a Withrequired hanger Including supply of all materials, labour and T & P etc required for proper completion of work. 140 Dismentling of existing Wall tilesand then Replacing of 1 Nos of automatic urinal sensor with 1 nos of Self closing Concealed Urinal pushcock Model-PRS-CHR-073 orBrand & model approved by E/I and fixingnew wall tilesin 1 urinal pot of approved brand as directed by E/I.The work include cost of all labour,material T&P required for proper completion of work. 141 Supply and fixing of Concelled cistern with wall mounting frame & instalation kitModel No CIB-31801011XW-2400WS with control plate lemon design Model No-CIS-CHR-31204190 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P for proper completion of work. 142 Supply and fixing of Jet Sprayjaquar or Equivalen Model No- ALD-CHR-547 or as approved By engineer incharge,the work included cost of labour, material T&P etc required for proper completion of work. 143 Supply and fixing of Two way Bib cock with wall flange Jaquar or Equivant make Model No-OPP-15041PMas approved by E/I,the work included cost of all labour, material T&P required for proper completion of work. 144 Supply and fixing ofRack bolt For WC Model No-ZPS-SNS-RB01 of Jaquar make or equivalentas approved by E/I. The work includedcost of all labour, material T&P Required for proper completion of work. 145 Supply and fixing of Wax Seal Model No-ZPS-WHT-1401 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work. 146 Supply and fixing of Cistren Base Plate Model No- ZMP - CHR-003 or approved a of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work. 147 Supply and fixing of Cistren ball Cock Model No- ZMP - CHR-002 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Required for proper completion of work. 148 Supply and fixing of Cistren Syphon Model No- ZMP - CHR-001 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work. 149 Supply and fixing of Conector Pipe Model No- ZPS-WHT-CP01 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P Requiredfor proper completion of work. 150 Supply and fixing of Brass Inlet Fixing Model No- ZPS-BRC-5007of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work. 151 Supply and fixing of Rubber Gasket Inlet Model No- ZPS-BLK-1403 of Jaquar make or equivalent as approved by E/I. The work includes cost of all labour, material T&P Required for proper completion of work. 152 Painting two coat ofSmart care Damp Proof Xtreme White Waterproof Coating Asian or equivalent make on roof/wall surface including removal of loose particles etc,surface should be free from dust, grease or any other foreign material including repair of suface if requird. First coat shall be applied after 30% diluted with water, second coat shall be applied undiluted only after drying of first coatincludingthe supply of all material labour , T&P etc required for proper completion of work as approved by E/I. 153 Supply and fixing of Metropole Flush Valve Regular 32mm Size (Concealed Body) with Exposed Shut Off Provision & 100mm Square Plate Model No- FLV-1095NSQZPS-BLK-1403 of Jaquar make or equivalent as approved by E/I. The work included cost of all labour, material T&P etc for proper completion of work . 154 Dismanteling, Alignment& Refiixing of existing Aluminium Door including replacement of handle, lock,hinges , tower bolts, EPDM rubber beading, Glass/ACP as requied including cost of silicon sealent,screw,fastner etc (Excluding door closure )and T&P for proper completion of work as approved by E/I. 155 Dismanteling, Alignment& Refiixing of existing aluminium sliding windowincluding replacement of handle, lock,Hinges ,tower bolts, EPDM Rubber beading,Sliding Roller, Glass as requied including cost of silicon sealent,screw,fastner etc and T&P for proper completion of work as approved by E/I. 156 Supplying & fixing suitable size GI box wih 1 modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP МСВ, С curve including connections, painting etc. as required. 157 Supply and Fixing of 5 Blade Exhaust fan Ventiles aur dx 225mm of Havells or equivalent make including all material , T&P etc required for completion of work as approved by engineer in charge 158 Chemical Electrode Earthing of size 50mm dia X 3000mm ground with suitable compund. One forAdmin Building. 159 Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. 160 Supply and Fixing of 12 to 30 watt LED post top indirect light luminaire having pressure die cast aluminium body and clear glass with driver set comfiring to IP66 and above protection. 161 Supply & fixing steel tabular pole 5 meter lomg designated410 SP-1 in 1:3:6cement concrete foundation includingexcavation back Filling etc. 162 Supply and Fixing of 3 Blade Ceiling fan 1200mm of Håvells or equivalent make including all material,T&P etc required for completion of work as approved by engineer in charge. 163 Supply and Fixing of 3 Blade wall fan of Havells platina 300/400 mm or equivalent including all material t&P etc required for proper completion of work as approvred by engineer in charge for mess 164 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required for mess 165 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required for mess 166 Supply and Fixing of 8 to 16 watt LED on surface Luminaire with driver set confiring to IP 65 protection. 167 SIC (Supply,Installation and Connection 630Amp bus bar panel with 630Amp MCCBs 168 Chemical Electrode Earthing of size 50mm dia X 3000mm ground with suitable compund. officers Hostel.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
40.
Defence #10477212 Price Bid
Procurement Drugs / Consumable Through Price Agreements Procurement Drugs / Consumable Through Price Agreements For One Year , Electrical Items : , Ether Solvent , Isoflurane Bottle Of 100 Ml , Ketamine Hcl 50 Mg / Ml, 2 Ml Inj , Propofol 1% Or 10Mg / Ml, 20 Ml Inj , Thiopentone Inj Of 0.5 G Without Water For Injection , Sevoflurane Bottle Of 250 Ml Closed Fill System With Integrated Non-Removable Adapter , Sevoflurane Bottle Of 250 Ml , Bupivacaine Hcl 5 Mg / Ml, 20 Ml Inj , Bupivacaine Hcl 5 Mg / Ml Heavy 4 Ml Inj , Lignocaine Hcl 2% ( Without Adrenaline ) 30 Ml Inj ( Suitable For Ophthalmic Use Also ) , Lignocaine Hcl 2% With Adrenaline ( 1:80000 ) 30 Ml Inj , Lidocaine / Lignocaine Hcl 2% With Adrenaline / Epinephrine ( 1:80, 000 ) 2 Ml Cartridge , Lignocaine 100 Mg & Ethanol 28 Mg / Ml V / V Spray Container Of 500 / 800 Ml , Lignocaine Hcl Jelly 2% Tube Of 30 Gm With Plastic Nozzle , Atropine Sulphate 0.6 Mg, 1 Ml Inj , Midazolam 5 Mg, 1 Ml Inj , Peracetic Acid Bott Of 810 Gm , 2 Propanol & 1 Propanol Macetronium Ethylsulphate 0.2%, 45 Gm / 30Gm In 100 Gm , 1, 6 Dihydroxy, 2-5 Dioxahexane, Gluteraldeyde Benzylalkonium Chl, Alkyl Urea Derivative, 11.2Gm / 5.0Gm 5Gm / 3Gm In 100 Gm , Indicator Soda Lime , Paracetamol With Cysteine Hcl Monohydrate Infusion 1000Mg / 100Ml , Aspirin ( Soluble ) 350 Mg Tab , Common Cold Tab ( Cetrizine 5-10 Mg + Paracetamol 500 Mg + Pseudoephedrine 30-60 Mg ) , Deflazacort 6 Mg, Tab , Diclofenac Sodium 50 Mg, Enteric Coated Tab , Diclofenac 25 Mg / Ml Ip, 3Ml Inj , Ibuprofen 200 Mg Tab , Ibuprofen Syrup 100 Mg / 5Ml Bott Of 50 Ml , Ibuprofen 400 Mg Tab , Naproxen 250Mg Tab , Paracetamol 500Mg Tab , Paracetamol 150Mg / Ml, 2 Ml Iv, Inj , Paracetamol Syp 125 Mg / 5 Ml Bottle Of 60 Ml , Paracetamol 325Mg And Ibuprofen 400Mg Tab , Etoricoxib 120 Mg, Tab , Piroxicam 20 Mg Tab , Piroxicam 40 Mg, 2 Ml Inj , Indomethacin 75 Mg Sr Tab , Allopurinol 100 Mg Tab , Indomethacin 25Mg Tab / Cap , Ketorolac 10 Mg Tab , Tizanidine 2Mg + Ibuprofen 400Mg Tab , Tramadol Hcl 50 Mg Cap / Tab , Tramadol Hcl 50Mg / Ml Inj, 1 Ml Amp , Valethamate 8Mg / Ml, 1Ml Inj , Febuxostat 40 Mg Tab , Betamethasone 4Mg 1Ml Inj , Adrenaline Tartrate ( 1:1000 ) , 1 Ml Inj , Cetrizine-Dihydrochloride 10 Mg Tab , Levo-Cetrizine 5Mg Tab , Cyproheptadine 4 Mg Tab , Suspension Fexofenadine 30Mg / 5Ml 60 Ml Bottle , Montelukast 10 Mg + Levocetrizine 5 Mg ( Combination ) , Tab , Dexamethasone 0.5 Mg Tab , Dexamethasone Sodium Phosphate 4.4 Mg ( Equivalent To Dexamethasone Phosphate 4 Mg / Ml ) 2 Ml Inj , Olapatidine 5Mg Tab , Hydrocortisone Sodium Succininate 100 Mg Inj , Pheniramine Maleate Inj 22.75 Mg Per Ml Amp Of 2 Ml , Nor Adrenaline Bitartrate 2 Mg / Ml, 2 Ml Inj , Pheniramine Maleate 25 Mg Tab , Prednisolone 5 Mg Tab , Methylprednisolone 16 Mg, Tab , Promethazine Hcl 2.5%, 25Mgm / Ml, 2 Ml Inj , Leucoverin 15Mg Tab , Pralidoxime 500Mg / 20Ml Inj , Levetiracetam 100Mg / Ml, Vial Of 5 Ml Inj , Divalproate 500 Mg, Tab , Pregabalin 75 Mg, Cap / Tab , Levetiracetam 100 Mg / Ml, 100 Ml Bott , Levetericetam 500 Mg, Tab , Oxcarbazepine 150 Mg Tab , Oxcarbazepine 300 Mg Tab , Carbamazepine 200 Mg Tab , Carbamazepine 200 Mg Cr Tab , Carbamazepine Syp 100Mg / 5Ml Bottle Of 100 Ml , Clobazam 5 Mg Tab , Clonazepam 2 Mg Tab , Lorazepam 2Mg / Ml, 2 Ml Inj , Diazepam 10 Mg, 2 Ml Inj , Donepezil 5 Mg Tab , Diazepam Syp 2Mg / 5Ml Bottle Of 60 Ml , Diazepam 5 Mg Tab , Gabapentin 300 Mg Cap , Phenobarbitone Sod 200Mg, 1 Ml Inj , Phenobarbitone 30Mg Tab , Inj Fosphenytoin 75Mg / Ml-2Ml Ampoule , Phenytoin Oral Suspension Containing Phenytoin 100Mg / 4Ml Bottle Of 100 Ml , Phenytoin Sodium 100 Mg Tab , Sodium Valproate 100Mg / Ml Inj , Sodium Valproate Oral Solution 200Mg / 5Ml Bott Of 100 Ml , Sodium Valproate 200 Mg Tab , Immunoglobulin ( Human ) 500 Mg Inj , Lamotrigine 25 Mg Tab , Lamotrigine 50 Mg Tab , Sumatriptan 50 Mg Tab , Topiramate 25 Mg Tab , Baclofen 10 Mg Tab , Nimodipine 30 Mg Tab , Acebrophylline 100 Mg Cap , Budesonide 200Mcg Inhaler , Budesonide 200Mcg + Formeterol 6 Mcg Autohaler , Budesunide 1 Mg Respules , Chlorzoxazone 500 Mg + Diclofenac Sodium 50 Mg + Paracetamol 325 Mg Tab , Salmeterol 25 Mcg + Fluticasone 250 Mcg Autohaler , Diacerin 50 Mg Tab , Doxiphyllin 400 Mg Tab , Dulaglutide 0.75 Mg Solution For Inj In Pre-Filled Pen , Gliclazide Xr 60 Mg Tab , Hydrocortisone 5 Mg Tab , Insulin Analogue Long Acting Basal Plus Long Acting Glp-1 Analogue In Pfs / Pfp Inj , Pyrazinamide 1 Gm Tab , Albendazole 400 Mg Tab , Albendazole Syp Each 5 Ml Containing 200 Mg Bott Of 10 Ml Syp , Sitagliptin 50 Mg + Metformin 500 Mg Tab , Ivermectin Tab 6Mg , Spacer Device For Inhaler , Pyrantel Pamoate 250 Mg / 5Ml Susp. , Diethylcarbamazine 50Mg Tab , Clofazimine 100Mg Cap , Dapsone 50Mg Tab , Tab Amitriptyline 25 Mg , Tab Artisunate 25Mg + Sulphadoxine 250Mg + Pyrimethamine 12.5 Mg , Itopride 50Mg , Rifampicin 150Mg Cap , Rifampicin 450Mg + Isoniazid 300Mg Combination Cap / Tab , Rifampicin 600 Mg+Tab Inh 300Mg Tab , Ethambutol 200Mg Tab , Isoniazid 100Mg With Pyridoxine 5Mg Tab , Isoniazid 300 Mg Tab , Streptomycin 1 G Inj , Pyrazinamide 0.5 Gm Tab , Pyrazinamide 1500 Mg Tab , Streptomycin Sulphate 750Mg Sod Methane Sulphonate, Isonicotinic Hydrazide 300 Mg Inj , Clotrimazole Mouth Paint 1% Bottle Of 15 Ml , Fluconazole 50 Mg Cap / Tab , Fluconazole 150 Mg Cap / Tab , Fluconazole Infusion 2 Mg / Ml 100 Ml Bott , Itraconazole 100Mg Cap , Diloxanide Furoate 500 Mg Tab , Metronidazole 400 Mg, Tab , Tinidazole 500 Mg Tab , Artesunate 60Mg Inj , Artesunate 50Mg Tab , Sulphadoxine 500 Mg & Pyrimethamine 25 Mg Tab , Artemether 80Mg / Ml, 1 Ml Inj , Artemether 40Mg Cap , Chloroquine Phosphate Syp ( Containing 50Mg Base Per 5Ml ) Bottle Of 60 Ml , Chloroquine Phosphate 250Mg Tab , Mefloquine 250Mg Tab , Primaquine ( 7.5Mg Base ) Tab , Quinine 300Mg Tab , Azathioprine 50Mg Tab , Cyclosporine A Micro Emulsion 25 Mg Cap , Cyclosporine A Micro Emulsion 100 Mg Cap , Methyl Prednisolone Sodium Succinate 1000 Mg Inj , Mycophenolate Mofetil 500Mg Tab , Morphine Hydrochloride 10 Mg Tab , Paraffin / 15 Ml Containing Magnesium Hydroxide 11.25Ml Liq Paraffin 3.75Ml , Hydroxyurea 500 Mg Cap , Gefitinib 250Mg Tab , Imatinib Mesylate 100Mg Cap , Methotrexate Sodium 50Mg, 2 Ml Inj , Methotrexate 2.5Mg Tab , Thalidomide 50Mg Cap , Granulocyte Colony Stimulating Factor 300Mcg Inj , Imatinib Mesylate 400Mg Cap , Methotrexate 5 Mg, Tab , Bicalutamide 50 Mg Tab , Ondansetron ( 2Mg / Ml ) 4 Ml Inj , Ondansetron 8 Mg Tab , Exemestane 25 Mg Tab , Goserelin 3.6 Mg Prefilled Syringe , Letrozole 2.5 Mg Tab , Medroxy Progesterone 10 Mg Tab , Anastrazole 1Mg Tab , Tamoxifen Citrate 20 Mg Tab , Inj Pegylated Gcsf 6Mg , Amantadine 100 Mg Cap , Bromocriptine 2.5 Mg Tab , Cabergoline 0.5 Mg, Tab , Levodopa 250 Mg With Carbidopa 25 Mg Tab , Rasagiline 1Mg, Tab , Trihexyphenidyl Hcl 2 Mg Tab , Tab Levodopa 125 Mg , Tab Levodopa Cr 250 Mg , Tab Methylcobalamine 1500 Mcg , Tab Topiramate 50Mg , Tab Leviteracetam 500Mg , Erythropoeitin Human Recombinant, 2000 Iu , Erythropoeitin 10, 000 Iu Inj , Erythropoitein Human Recombinant 20000 Iu Inj , Folic Acid 5 Mg Tab , Heamatinic Tab / Cap Containing ( A ) Ferrous Fumarate 200 Mg To 350M Mg ( B ) Vit B12 2Mcg To 10 Mcg ( C ) Folic Acid 500 Mcg To 1500 Mcg , Ethamsylate 250 Mg, Tab , Heparin 5000 Iu / Ml Inj , Acenocoumarol 4 Mg Tab , Acenocoumarol 1 Mg Tab , Tranexamic Acid 500 Mg / 5Ml Inj , Tranexamic Acid 500Mg Tab , Phytomenadione ( Vit K ) 1 Mg / 0.5 Ml Inj , Atorvastatin 20 Mg Tab , Carvedilol 3.125Mg Tab , Carvedilol 12.5 Mg Tab , Diltiazem 60 Mg Tab , Diltiazem ( Controlled Delivery ) 90Mg Tab , Fenofibrate 200 Mg Tab , Diltiazem 5Mg / Ml Inj , Isosorbide Dinitrate 10 Mg Tab , Isosorbide Mononitrate 20 Mg Tab , Nicorandil 10 Mg Tab , Bosentan 62.5 Mg, Tab , Torsemide 10 Mg ( Scored Tab ) Tab , Tab Perindopril 8Mg , Nitroglycerin 5Mg Controlled Release Patches , Gycerl Trinitrate Cr 2.6 Mg, Tab , Simvastatin 20Mg Tab , Adenosine 3 Mg / Ml, 2 Ml Inj , Verapamil 5 Mg, 2 Ml Inj , Ecosprin 75Mg+Rosuvastatin 10 Mg Tab , Amiodarone Hcl 150 Mg, 3 Ml Inj , Amiodarone Hcl 200 Mg Tab , Esmolol 100 Mg, 10 Ml Inj , Prasugrel Hcl 5 Mg Tab , Atorvastatin 10 Mg Tab , Rosuvastatin 5Mg Tab , Lignocaine Hcl Solution 2% For Iv Use, 50 Ml Inj , S -Amlodepine 5Mg, Tab , Atenolol 50 Mg Tab , Atenolol 25 Mg Tab , Enalapril Maleate 10 Mg Tab , Enalapril Maleate 2.5 Mg Tab , Nebivoilol 5Mg, Tab , Labetalol Hcl 100 Mg Tab , Metoprolol Tarterate 50 Mg Tab , Metoprolol 1 Mg / Ml, 5 Ml Inj , Nifedipine Retard 20 Mg Cap / Tab , Propranolol Tr 40 Mg, Tab , Ramipiril 2.5 Mg Tab , Sodium Nitroprusside 50 Mg Inj , Digoxin 0.25 Mg Tab , Digoxin 0.5 Mg, 2 Ml Inj , Vasopressin 20 Units / Ml Inj, 1Ml Ampoule , Dopamine Hcl 40 Mg / Ml, 5Ml Inj , Dobutamine Hcl 250 Mg, 5 Ml Inj , Asprin 75 Mg Tab , Streptokinase 15 Lacs Iu Inj , Clopidogrel 75 Mg Tab , Enoxaparin 20 Mg / 0.2Ml Inj , Enoxaparin 40 Mg / 0.4Ml Inj , Enoxaparin 60 Mg / 0.6Ml Inj , Aspirin 150 Mg Tab , Warfarin 5 Mg Tab , Amlodipine Besylate 5 Mg Tab , Metoprolol - Extended Release 50Mg , Atenolol 50Mg + Amlodipine 5 Mg Tab , Clonidine 100 Mcg Tab , Hydrochlorothiazide 25Mg , Telmisartan 40 Mg, Tab , Frusemide 20Mg + Spironolactone 50 Mg Tab , Indapamide Sr 1.5 Mg Tab , Labetalol Hcl 5Mg / Ml, 4Ml Inj , Losartan 25 Mg Tab , Losartan 50 Mg Tab , Prazosin 2.5 Mg Sustained Release / Slow Release Tab , Prazosin 5 Mg Sustained Release / Slow Release Tab , Ramipiril 5 Mg Tab , Ramipiril 10 Mg Tab , Enalapril 5 Mg Tab , Methyldopa Tab 250Mg , Perindopril 4Mg Tab , Telmisartan 40 Mg + Hydrochlorthiazide 12.5 Mg, Tab , Antiseptic Mouth Wash Containing Sodium Fluoride & Triclosan Bott Of 100-150Ml , Anticarious Fluoride Rinse Mouth Wash With Sodium Fluoride Acidulated Phosphate Bott Of 300-500 Ml , Benzocaine 20%, Pectin Based, Oral Ointment Tube Of 5 Gm , Desensitising Paste ( Stannous Fluoride / Pottasium Nitrate / Sodium Monofluro-Phosphate ) Tube Of 40-55 Ml Or Gm , Anticaries Fluoride Gel Containing Sodium Fluoride / Stannous Fluoride Bott / Tube Of 120-150 Ml Or Gm , Chlorhexidine Mouth Wash 0.12% Sugar And Alcohol Free Bottle Of 450-500 Ml In Amber Coloured Bottle , Mercury ( Pack Of 225 Gm ) , Triamcinalone Acetate 1% For Oral Use, Tube Of 5 Gm , Adapalene 0.1% Tube Of 15 Gm , Tacrolimus Oint ( 0.03% ) 20 Gm Tube , Benzoyl Peroxide 2.5% Tube Of 20 Gm Tube , Ointment Betamethasone Dipropionate 0.05% And Salicylic Acid 3% Tube Of 20 Grams , Betamethasone Dipropionate Usp 0.05Mg And Gentamycin Sulphate 1Mg / Gm Tube Of 5Gm , Zinc Oxide / Titanium Dioxide Bott ( Spf 50 ) ( Sunscreen Lotion ) Bottle Of 60 Ml , Clindamycin Phosphate 1% Topical Gel Tube Of 10 Gm , Clobetasol Propionate Cream 0.05% In Tube Of 10 Gm , Clotrimazole Cream 1% Tube Of 15 Gm , Clotrimazole Pulv 1% Bott Of 75 Gm , Desonide 0.05% Bott Of 30 Ml , Erythromycin 4% Gel Tube Of 20 Gm , Fexofenadine 180 Mg Tab , Fluticasone 0.05% W / W Cream 10Gm Tube , Liquor Formaldehyde 40% W / V , Framycetin Sulphate Cream Bp 1% Cream 100 Gms , Framycetin Sulphate Cream Bp 1% Cream 20 Gms , Gamma Benzene Hexachloride 1% W / V Cetrimide 0.1% W / V In Alcoholic Solution , Glycerin ( Glycerol ) In Bottle Of 1 Kg , Hydroquinone 2% Tube Of 50 Gm , Ketoconazole Lotion 2% Bott Of 75Ml , Isotretinoin 20 Mg Cap , Minocycline Hydrochloride 100 Mg Cap , Metronidazole 1% Tube Of 30Gm , Mometasone 0.1% Tube Of 10 Gm , Mupirocin 2% Oint Tube Of 5 Gm , Minoxidil 5 % Lotion Bott Of 60 Ml , Permethrin 5% Tube Of 30 Gm , Paraffin Soft Yellow Jar Of 4 Kg , Silver Sulphadiazine 1% Cream W / V Jar Of 500 Gms , Sisomicin Sulphate Skin Cream 0.10% Tube Of 7.5 Gms , Terbinafine 1% Cream Tube Of 10 Gm , Triamcinolone Acetate 10 Mg / Ml Inj , Tretinoin 0.025% Tube Of 15Gm , Tretinoin 0.05% Tube Of 20 Gm , Urea Cream, Urea 10 To 12% Lactic Acid 5 To 10% In Pack Of 50 Gm , Hydroxyzine Hcl 25Mgtab , Tab Valaciclovir Hcl 500 Mg , Terbinafine Hcl Tab Of 250 Gm , Fusidic Acid Cream 2 % W / W 10G Tube , Fluocinolone Acetonide 0.01%, Hydroquinone 4% And Tretinoin 0.05% Tube Of 15Gm , Enzymatic Detergent Solution Containing Bacterial Protease< 8.5% Per 100Ml , Sodium Hypochlorite 5% , Chlorhexidine Gluconate Solution Equivalent To 4% W / V With Isopropanol< 10%, Ethoxylated Alkylphenol < 10% Fatty Acid Diethanolamide< 10%, Acetic Acid Glacial , 2-Propanol 45Gm, 1- Propanol 30 Gm Ethyl Hexadecyl Dimethyl Ammonium Ethyl Sulphate 0.2 Gm With Skin Protecting Substances 500 Ml Bott With Dispenser , 0.5% W / V Chlorhexidine Gluconate In 70% V / V Ethyl Alcohol With Moisturizer 500 Ml Bott With Dispenser , 10% Povidone Iodine Solution, U.S.P Equivalent To 1% Available Iodine 500 Ml Bott , Chloroxylenol Sol Pot Hydroxide 13.6G, Chloroxylenol Solution 50.5G Oleic Acid-7.5Ml Castor Oil-63.0G Terpineal-100Ml Ethanol ( 96% ) -200Ml Purified Water Freshly Boiled & Cooled To Produce 1000Ml , Hydrogen Peroxide Solution With Stabilizer Ip ( 20 Volume ) 500 Ml Bott , Chlorhexidine Solution Containing Chlorhexidine Gluconate Bp 7.5% V / V Cetrimide Bp 15% W / V 1000 Ml Bott ( Savlon ) , Paraformaldehyde Tab , Povidone Iodine Solution 5% Bottle Of 100 Ml , Acetazolamide 0.25G Tab , Tab Dutasteride 0.5 Mg , Frusemide 40 Mg Tab , Frusemide 20 Mg, 2 Ml Inj , Mannitol 20% Inj Bottle Of 350 Ml Inj , Spironolactone 25 Mg Tab , Triamterene 50Mg Ip And Benzthiazide 25 Mg Nfc ( Us ) Tab , L-Ornithine L Asparate 5Gm, 10Ml Inj , L- Ornithine L Aspartate Powder 5Gm , Ursodeoxycholic Acid 150Mg Tab , Bacillus Clausii 2 Billion Spores / 5 Ml , Human Albumin 20% In Bott Of 100Ml , Somatostatin Inj 3Mg , Rifaximin 200 Mg Cap , Terlipressin 1Mg + 5Ml Sterile Diluent Inj , Furosemide 40 Mg + Amiloride Hydrochloride 5 Mg Tab , Octreotide 0.1Mg / Ml Inj , Mesalamine Suppository 500 Mg , Pancreatic Enzyme Supplement With A Lipase Content Of 25000 Units Or More Cap , Antispasmodic Tab Containing Mefenamic Acid 250 Mg & Dicyclomine Hcl 10 Mg , Tenofovir 300 Mg Tab , Tab Levosulpiride 25 Mg , Cap Probiotic ( Multibacillary- 4 Or More Organisms ) , Antacid ( Chewable ) Containing Ai ( Oh ) 3 300Mg, Mg Silicate 25 Mg & Simethicone 25 Mg Or Megaldrate 480Mg+Simethicone 20Mg , Antacid Gel Each 5Ml Containing Dried Aluminium Hydroxide Gel Ip 250Mg, Magn Esium Hydroxide Nf 250Mg And Methyl Polysiloxane 50Mg Bottle Of 170 Ml , Clarithromycin 500Mg Tab , Omeprazole 20 Mg Cap , Pantoprazole 40Mg Tab , Pantoprazole 40Mg Inj , Sucralfate Suspension 1Gm / 5Ml Bott Of 200 Ml , Ranitidine 150 Mg Tab , Ranitidine Hcl 50 Mg, 2 Ml Inj , Domperidone 10 Mg Tab , Metoclopramide 10 Mg Tab , Metoclopramide Hcl 5Mg / Ml, 2Ml Inj , Metoclopramide Syrup 5Mg / 5Ml Bott Of 30 Ml , Anti Haemorrhoidal Ointment Containing Hydrocortisone Acetate 5.58Mg, Framycetin 10Mg Heparin 100Iu, Esculoside 10Mg Ethyleaminobenzoate 10Mg, Butyleaminobenzoate 10Mg Per Gm Tube Of 10 Gm With Applicator , Anti Haemorhoidal Ointment Containing Betamethasone 0.05% Phenylephrine 0.1% & Lignocaine 2.5% Tube Of 15 Gm With Applicator , 5 Amino Salicylic Acid Sr 1.2 G, Tab , 5- Amino Salicylic Acid Enema 4G , Hydrocortisone Enema 10% W / W , Sulphasalazine 500Mg Tab , Dicyclomine Hcl 20Mg Inj , Drotaverine Hcl 20Mg / Ml Inj , Tab / Cap Dicyclomine 10Mg , Hyoscine Bromide Inj 20 Mg / Ml, 1Ml Inj , Mebeverine Hcl ( 135Mg ) Tab , Enema Sodium Phoshate Ml 6% Sod Acid Phoshate 16% Pack Of 100Ml , Glycerine Suppositories Child Size ( 2G Mould ) , Isapgol / Ispaghula Husk 3.5 Gm , Bisacodyl 5 Mg Tab , Lactulose Syp Each 5Ml Containing 3.325G Bott Of 100 Ml , Parraffin Liq In Bottle Of 100 Ml , Polyethylene Glycol ( Purgative Powder ) Ip 118Gm. Sod Chloride 2.93 Gm, Pot Chloride 1.484 Gm, Sod Bicarb 3.37 Gm, Sod Sulphate 11.35Gm , Norflox 400 Mg + Tinidazole 600Mg Tab , Oral Rehydration Powder Sachet Of 20.5 G Each Containing Sodium Chloride Ip 2.6 G Anhydrous Dextrose Ip 13.5 G, Potassium Chloride Ip 1.5 G & Sodium Citrate Ip 2.9 Gm To Make The Mixture , Pancreatin Microspheres 150Mg Cap , Secnidazole 1 Gm Tab , Pancreatic Enzyme Capsules With A Lipase Content Of 10000 To 20000 Units , Ornidazole 500 Mg + Ofloxacin 200 Mg, Tab , Loperamide 2Mg Tab , Hydrocortisone 20Mg Tab , Misoprostrol 25 Mcg, Tab , Tab Thyroxine 50Mcg , Tab Metformin Sr 0.5Gm , Tab Metformin Sr I Gm Tab , Nandrolone Decanoate 25Mg / Ml Inj , Inj Liraglutide 6 Mg Per Ml Pre Filled Pen / Pre Filled Syringe Of 3 Ml , Purified Fsh 75 Iu Inj , Goserlin 10.8Mg Inj , Insulin Lispro 25% And 75% Insulin Lispro Protamine Susp Inj, 300 Iu, Prefilled Pen , Hmg 150 Iu Inj , Carboprost Tromethamine 250 Mcg / Ml 1Ml Inj , Ethinyl Estradiol 0.035Mg, Cyproterone Acetate 2Mg ( Pack Of 21 Tablets ) , Clomiphene Citrate 50 Mg Tab , Doxylamine Succinate 10Mg Usp+Pyridoxine Hydrochloride 10 Mg Ip Tab , Danazol 100 Mg Cap , Mifepristone 200 Mg Tab , Oestrogen Cream ( Concentration 0.06% To 0.1% W / W ) ( Tube Of 15 To 50 Gms ) , Misoprostol 200 Mcg Tab , Dydrogesterone 10Mg Tab , Natural Micronised Progesterone 100 Mg Tab , Dinoprostone Gel 0.5Mg ( In 3Gm / 2.5Ml Gel ) / Syringe , Ethacridine Lactate Set Of 3 Vials Of 50Ml Each ( 1Mg / Ml ) , Ethinylestradiol 0.01 Mg Tab , Hydroxyprogesterone Caproate 500 Mg / 2 Ml ( Amp Of 2 Ml ) Inj , Clotrimazole Vaginal Pessary 100Mg , Saxagliptin 5 Mg Tab , Povidone Iodine 200 Mgm Pessary , Prednisolone 20 Mg , Isoxsuprine 10Mg Tab , Isoxsuprine Hcl 5Mg / Ml Amp Of 2 Ml , Levonorgestrel 0.25 Mg + Ethinylestradiol 0.03Mg ( Pack Of 21 Tab ) , Medroxy Progesterone 10 Mg Tab , Methylergometrine Maleate 0.2Mg, 1 Ml Inj , Nor-Ethisterone 5Mg Tab , Obstetric Antiseptic Cream Containing Dichloroxylenol 1% Terpineol 1% Phenol 0.25% In Lubricant Base , Oestrogen Conjugated 0.625Mg Tab , Conjugated Estradiol 0.625 Mg Per Gm Tube Of 15 Gm + Applicator , Oxytocin 5 Units Per 1.0Ml Amp Inj , Metformin 1000Mg+Vildagliptin 50 Mg Tab , Magnesium Sulphate 50% W / V Inj , Slide Test For Pregnancy ( Agglutination Inhibition Test ) Kit Of 25 Tests , Acarbose 50 Mg Tab , Glimepiride 1Mg Tab , Glimepiride 2 Mg Tab , Insulin Premixed Biphasic 40 Iu Per Ml ( 30% Human Neutral Plus 70% Human Isophane Insulin ) , 10 Ml Inj , Voglibose 0.2 Mg Tab , Human Insulin Analogue Rapid Acting Inj, 100 Iu / Ml ( Recombinant Dna Origin ) 300 Iu Disposable Pen With 5 Needles Per Pen , Human Insulin Analogue Long Acting Basal Inj, 100 Iu / Ml ( Recombinant Dna Origin ) 300 Iu Disposable Pen With 5 Needles Per Pen , Gliclazide Mr 30 Mg, Tab , Glipizide 5Mg Tab , Glibenclamide 5Mg Tab , Inj Human Insulin Analogue Aspart Premix 30% Insulin / 70% Insulin Protamine Aspart Suspension 100 Iu / Ml ( Monocomponent Insulin, Recombinant Dna Origin ) 3 Ml Pfs / Pfp , Tab Vildagliptin 50Mg , Insulin Highly Purified Human Regular 40Iu / Ml, 10 Ml Inj , Sitagliptin 50 Mg+Metformin 1000Mg Tab , Insulin Lispro Biphasic Injection I.P ( 25% Insulin Lispro And 75% Insulin Lispro Protamine Suspension ) , Insulin Highly Purified Isophane ( Human Nph ) 40Iu / Ml, 10 Ml Inj , Tab Empagliflozin 10 Mg , Linagliptin 5 Mg , Metformin 0.5G Tab , Tab Metformin 500 Mg + Tab Vidagliptin 50 Mg , Pioglitazone Hydrochloride 15 Mg Tab , Carbimazole 5 Mg Tab , Thyroxine Sodium 0.025 Mg Tab , Thyroxine Sodium 0.1Mg Tab , Alendronate Sodium 70Mg Tab , Human Chorionic Gonadotrophin 2000 Iu Inj , Menotrophin ( 75U Fsh+ 75 Ulh ) Inj , Atracurium 10 Mg / Ml, 2.5 Ml Inj , Glycopyrrolate 0.2 Mg / Ml, 1Ml Inj , Neostigmine 0.5 Mg, 1 Ml Inj , Pancuronium Bromide 2 Mg / Ml, 2 Ml Inj , Pyridostigmine 60 Mg Tab , Succinylchloline Chloride 50 Mg / Ml, 2 Ml Inj , Vecuronium Bromide 4Mg / Ml, 1 Ml Inj , Alfacalcidol Vit D3 0.25Mcg Cap , Flavoxate 200 Mg Tab , Calcium Acetate 500 Mg Tab , Erythropoietin Recombinant Human 4000 Iu , Mycophenolate Sodium 360Mg Tab , Protein Supplement , Papaverine Hydrochloride 50 Mg, 2 Ml Inj , Tacrolimus 1Mg Tab , Tacrolimus 0.5Mg Cap , Sevelamer 400 Mg Tab , Everolimus 0.75 Mg Tab , Tab L-Carnitine 500Mg , Tab Sodium Bicarbonate 500Mg , Human Insulin Analogue Glargine Inj, 100 Iu / Ml ( Recombinant Dna Origin ) 300Iu Disposable Pen With 5 Needles Per Pen , Acyclovir Ophth Ointment 3% W / W In 5 Gm Tube , Timolol Maleate 0.5% Preservative Free With Comod System , Chloramphenicol 0.5% + Dexamethasone Sodium 0.1% Bott Of 5 Ml , Ciprofloxacin 0.3% Eye Drops Of 3Mg / Ml Bott Of 5 Ml , Ciprofloxacin Hcl 0.3% Tube Of 5 Gm , Ciprofloxacin Hcl 0.3% + Dexamethasone 0.1 % Bott Of 5Ml , Fluconazole 0.3% W / V Bott Of 5 Ml , Flurbiprofen Sodium Ophthalmic Sol 0.03% Vial Of 5 Ml , Gatifloxacin 0.3% Eye Drop Bott Of 5 Ml , Gentamicin Sulphate 0.3% W / V Gentamicin Base With Hydrocortisone Acetate Ip 1% W / V Eye & Ear Drops Bott Of 5 Ml , Moxifloxacin 0.5% Preservative Free Eye Drops , Homatropine Hydrochloride, Sol 2% , Ketotifen Fumarate 0.005%, Eye Drops , Ketorolac Tromethamine 0.4%, Eye Drops , Brimonidine Tartrate 0.2%, Eye Drops , Latanoprost 0.005% With 0.5% Timolol Eye Drop Bott Of 2.5 Ml , Lotepredenol Etabonate 0.5% Bott Of 5 Ml , Lignocaine Hyrochloride 4% Topical Solution Bott Of 30 Ml , Carboxy Methyl Cellulose 1% Eye Drop Bott Of 10 Ml , Methyl Cellullose 2% Solution Bottle Of 5 Ml , Dorzolamide 2%, Eye Drops , Carboxy Methyl Cellulose ( Cmc ) 1%, Gel , Ofloxacin 0.3% Bott Of 5 Ml , Phenylephrine Hcl 10% With Chlorbutol 0.5% Eye Drops , Povidone 5% Eye Drop Bott Of 5 Ml , Predinisolone Acetate 1% W / V Bott Of 5 Ml , Sodium Chromoglycate Eye Drops 2% Bott Of 5 Ml , Sodium Chloride 6% W / W Ointment Tube Of 3 Gm , Sodium Chloride Eye Drops 5%, 5 Ml Bott , Sulphacetamide Drops 20% Ml ( Sod ) In 10Ml / 14Ml Amber Bottle With Self Dropper , Timolol Maleate Eye Drop 0.5% Bott Of 5 Ml , Tobramycin 0.3% Bott Of 5 Ml , Tropicamide 1% With 5% Phenylephrine Eye Drop Bott Of 5 Ml , Atropine Sulphate Oint 1% Tube Of 3 Gm , Dexamethasone 0.1% Eye Drop Bott Of 5 Ml , Bimatoprost 0.03% Bott Of 3Ml , Syp Diphenhydramine 10-15 Mg Per 5 Ml And Ammonium Chloride 100 -150 Mg, Sodium Citrate 50-85 Mg Per 5 Ml Bottle Of 100 Ml , Fluticasone Propionate 50 Mcg Bp, Nasal Spray , Sodium Chloride 0.65% W / V Nasal Drops Of 15 Ml , Azelastine Hcl 140 Mcg + Fluticasone Propionate 50 Mcg Bp, Nasal Spray , Beclomethasone Dipropionate Nasal Spray 50 Mcg Per Dose Metered Dose 150 Units , Betahistine Dihydro Chloride 8Mg Tab , Cinnarizine 25 Mg Tab , Prochlorperazine Maleate 5Mg Tab , Clotrimazole 1% W / V Ip+ Lignocaine 2% W / V Ip Ear Drop Bott Of 10Ml , Chloramphenicol 5% W / V Clotrimazole 1% W / V Betamethasone 0.25 % W / V Lignocaine Hcl 2% W / V In Bott Of 5 Ml , Pseudoephidrine 60 Mg With Tripolidine 2.5 Mg Tab , Nasal Decongestant Adult Drops ( Xylometazoline Hcl 0.1% W / V Nasal Drop ) Bottle Of 10 Ml , Xylometazoline Hcl 0.05% W / V Nasal Solution For Paed Use Bott Of 10Ml , Nasal Spray Xylometazoline 0.14 Mg / 0.14 Ml Preservative Free , Salmetrol 50 Mcg + Fluticasone 125Mg Mdi , 120 Doses , Cefixime Syp 50Mg / 5Ml Bott Of 30 Ml , Linezolid, Dry Powder 100Mg / 30Ml , Cetrizine Syp 5Mg / 5Ml Bott Of 60 Ml , Cypropheptadine Hcl 2 Mg / 5Ml Bott Of 100 Ml , Domperidone Syp 1 Mg / Ml Bott Of 30 Ml , Metronidazole Susp 200 Mg / 5Ml Bott Of 60 Ml , Nalidixic Acid 300 Mg / 5 Ml Bottle Of 30 Ml Susp , Norflox Syp 100Mg / 5Ml Bott Of 30 Ml , Ondansetron Syp 2 Mg / 5Ml In Bott Of 30 Ml , Iron Drops Paediatric Containing Ferrous Fumerate 25Mg / Ml, Vit B12 12.5Mg / Ml & Folic Acid 200Mg / Ml, Bott Of 15Ml , Roxythromycin 50Mg / 5Ml Syp In Bott Of 30 Ml , Levo-Salbutamol Syrup 1 Mg / 5Ml Bottle Of 100 Ml , Natural Surfactant 25 To 80Mg / Ml Inj , Tab Isoniazid 60 Mg + Rifampicin 60 Mg , Tab ( Dispersable ) Isoniazid 60 Mg + Rifampicin 60 Mg + Pyrazinamide 150 Mg , Alprazolam 0.25 Mg Tab , Bupropion Hcl 150 Mg Sr Tab , Buspirone Hcl 10 Mg Tab , Chloridiazepoxide 10Mg Tab , Clonazepam 0.5 Mg Tab , Clonazepam 0.25 Mg Tab , Doxepin 25 Mg Cap , Clomipramine Hcl 25 Mg Tab , Clozapine 100 Mg Tab , Duloxetine 20 Mg Tab , Doxepin Hcl 75 Mg Cap , Escitalopran 10 Mg Tab , Fluoxetine Hcl 20 Mg Cap , Haloperidol Deconate 50 Mg / Ml Inj In 1Ml Amp , Haloperidol 5Mg / Ml Inj , Haloperidol 5 Mg Tab , Lorazepam 1 Mg Tab , Memantine 10Mg Tab , Lithium Carbonate 300 Mg Cap / Tab , Mirtazapine 15 Mg Tab , Nortriptyline 25 Mg Tab , Naltrexone 50Mg Tab , Promethazine Hcl 25 Mg Tab , Risperidone 2 Mg Tab , Risperidone 4 Mg Tab , Acamprosate 333 Mg Tab , Aripiprazole 10 Mg Tab , Atomoxetime 10 Mg Tab , Olanzapine 10 Mg Tab , Olanzapine 5 Mg Tab , Sertraline 50 Mg Tab , Venlafaxine 37.5Mg Tab , Zolpidem 10 Mg Tab , Quitiapine 50 Mg, Tab , Paroxetine Xr 12.5, Tab , Tab Amisulpride 200 Mg , Tab Quetiapine 100 Mg , Etophylline Bp 84.7 Mg And Theophylline Ip 25.3, Per Ml, 2 Ml Inj , Beclomethasone Dipropionate 50 Mcg And Levosalbutamol 50 Mcg Per Metred Dose In Cfc Free Mdi , Beclomethasone Dipropionate 200Mcg Metered Dose Aerosol, Containg 200 Metered Doses , N Acetyl Cysteine 600 Mg, Tab , Etophylline 115Mg And Theophylline 35 Mg In Slow Release Form Tab , Ipratropium Bromide Respirator Soln 500 Mcg / 2 Ml Respule , Salbutamol Sulphaterespirator Solution 5Mg / Ml Of 15 Ml Bott , Levo Salbutamol Aerosol Pack Of 100-200 Metered Doses ( Each Metered Dose Supplies 50 Mcg Of Levo Salbutamol ) , Levosalbutamol Sulphate, 2.5 Ml Containing 1.25 Mg, Respule , Tiotropium Bromide 9 Mcg 120 Metered Doses / Unit, Inhaler , Tiotropium Bromide 18 Mcg & Formoterol 12 Mcg Dry Powder Cap , Budesonide 200 Mcg Dry Powder , Formoterol 12 Mcg & Fluticasone 250 Mcg Dry Powder , Tiotropium Bromide 18 Mcg Dry Powder Cap , Bromhexine Syp 5 Ml Containing 4 Mg Of Bromhexine Hcl Bottle Of 100 Ml , Cough Sedative Syp Each 5 Ml Containing Chlorpheniramine Maleate 2.5Mg Guiaphenesin 100Mg Noscapine 15Mg Sodium Citrate 60Mg In Flavoured Base Bott Of 100 Ml , Syrup Codeine Phosphate 10 Mg + Chlorphenaramine Maleate 4 Mg Per 5 Ml Bottle Of 100 Ml , Syrup Terbutaline Sulphate 1.25 Mg + Bromhexine Hcl 4 Mg + Guaiphenesin 50 Mg Per 5 Ml Bootle Of 100 Ml , Dextrose Monohydrate ( Glucose ) , Dextrose 50%, 25 Ml Inj , Dextrose Inj 25%, 25 Ml Inj , Amino Acid Preparation Iv Bott Of 200-250Ml , Hydroxy Ethyl Starch 6% Soln Bott Of 500 Ml , Potassium Chloride 15% Inj ( Iv ) Amp Of 10 Ml ( 1.5Gm ) , Potassium Chloride Liquid 20% Bott Of 200 Ml , Sodium Bicarbonate 7.5% Amp Of 10 Ml ( 8.4% In 25 Ml ) , Sterile Water For Amp Of 10 Ml , Teicoplanin 200 Mg Inj , Linezolid 600 Mg Tab , Meropenem 1 Gm Inj , Enzymatic Detergent , Antimicrobial Hand Gel Containing Ethyl Alcohol 60% + Cyclomethicone C12-15 Alkyl Lactate + Cetyl Lactate + Phenoxyethanol + Stearyl Alcohol With Moisturizer , Anti Phlebitis Cream Tube Of 15G / 20G , Micronised Purified Flavonoid Fraction 500 Mg ( Daflon 500 ) , Povidone Iodine 10% Solution, Bott Of 100 Ml , Enteral Feed Powder, Protein 85% Short Chain Peptides 15%, Free Amino Acids, Fat 50%, Mct 25% Vet Fat Carbohydrate Malto Destri Sachet Of 126 Gm , Immuno Booster Enteral Feed Containing Protein>13Gm, Fat32 Gm Enriched With Omega-3 Fatty Acids And Arginine , Tpn For Peripheral Vein Pack Of 1000-2500 Ml Containing : Calorie 600 K Cal / L, Amino Acid 22 Gms / L Nitrogen 3.5 Gm / L Or More, Glucose 65 Gm / L, Lipid, 20 Gm / L, Osmalarity Not More Than 900 Milli Osom / L , Haemostatic Sponge Gelatin 80 Mm Long, 50Mm Broad 10 Mm Thick , 0.5% Chlorhexidine Acetate Tulle Grass Dressing , Nadifloxacin 1% Gel, Tube Of 15Gm , Cilostazole Tab 100 Mg , Oxybutnin 2.5Mg Tab , Sildenafil Citrate 50 Mg Tab , Potassium Citrate 1100Mg, Citric Acid Or Mag Citrate 300 To 400Mg Per 5Ml Bott Of 200Ml , Tamsulosin Hcl 0.4Mg Cap , Tolterodine Tartrate 2 Mg Tab , Drotaverine Hcl 1%, 20 Mg / Ml, 2 Ml Inj , Drotaverine Hcl 40 Mg Tab , Finasteride 5 Mg Tab , Ascorbic Acid 500 Mg Tab , Pyridoxine 100 Mg, Tab , Vitamin B Complex With A Minimum Concentration Of Vit B1-5Mg, Vit B6-3Mg & Vit B12-5Mcg Therapeutic Tab / Cap , B 12, 500 Mcg / Ml Inj , Calcium Carbonate 500Mg Tab ( Elemental ) And Vit-D-3-200Iu To 250Iu Tab , Calcium ( 9Mg ) + Calcium Gluconate ( 50Mg ) Inj For Iv Use, 10 Ml Injection , Iron Syp Paediatric Each 5 Ml Containing Elemental Iron 25-50 Mg And Folic Acid 500Mcg Bottle Of 200Ml , Multi Vit Inj Iv 2-10 Ml With Minimum Constituents Having Thiamine ( B1 ) -30Mg / Ml, Pyridoxine ( B6 ) 30Mg / Ml And ( B12 ) Cyanocobalamin-300Mcg / Ml , Multivitamin Drops With Constituents Having Vit A, Vit B1, Vit B2, B6, Vit C, Vit D Bottle Of 15Ml ( Dosages As Per Recommended Daily Allowances ) , Vit D-3, Cholecalciferol 60, 000 Iu Tab , Vitamin E 200 Mg Cap , Azelastine Hcl 140 Mcg And Fluticasone Furoate 27.5 Mcg Per Dose ( Nasal Spray ) , Budesonide 0.5 Mg Respules , Ethambutol 800Mg Tab , Fluticasone Propionate Lotion Ml 0.05% Bott Of 10 Ml , Fluticasone Propionate Cream 0.05% Tube Of 10Gm , Fluticasone Propionate Oint 0.005% Tube Of 10 Gm , Fluticasone Propionate Inhaler For Paed Use 50Mcg / Dose, 120 Metered Doses , Fluticasone Propionate Inhaler For Adults 125 Mcg / Dose , Formeterol 6 Mcg And Budesonide 400 Mcg , Cfc Free, Mdi, 120 Metered Doses , Ipratropium Bromide Rotacaps ( 400 Mcg ) , Methyl Prednisolone Sodium Succinate 40 Mg, Inj , Monteleukast 5 Mg Tab , Ofloxacin 400 Mg Tab , Salmeterol 50Mcg + Fluticasone 250 Mcg Pulverised For Inhalation Rotacaps, Pack Of 30 , Salmetrol 50Mcg + Fluticasone 250Mcg Multi Dose Dry Powder Inhaler Of 30 / 60 / 100 Doses Powder Multi-Unit Dose Inhaler , Salmeterol Rotacap 50Mcg , Levo-Salbutamol 50 Mcg + Ipratropium 20 Mcg Metered Dose Inhaler, 200 Dose Units , Levo-Salbutamol 1.25Mg + Ipratropium 500 Mcg In 2.5 Ml Respule , Sulphasalazine 1000Mg Delayed Released , Colchicine 0.5Mg Tab , Capsacain Gel Tube Of 20 Gm , Diclofenac Gel 1% Tube Of 30 Gm , Fexofenadine Hydrochloride Tab 120 Mg , Glucosamine 500 Mg Tab , Glucosamine 250Mg + Chondroitin Sulphate 200 Mg Cap , Hydroxychloroquin 200 Mg Tab , Immunoglobulin Intravenous 2.5Gm Inj , Immunoglobulin Intravenous 5 Gm Inj , Methyl Prednisolone Sodium Acetate 80 Mg Inj , Methyl Prednisolone Sodium Succinate 0.5Gm Inj , Ibuprofen Gel Tube Of 20 Gm , Leflunomide 10 Mg Tab , Naproxen Gel Tube Of 20 Gm , Nimesulide Gel Tube Of 20 Gm , Tab Etoricoxib 90 Mg , Inj Methotrexate 15Mg, 1 Ml , Methylprednisolone 4 Mg, Tab , Cefepime 1Gm& Tazobactum 125Mg Powder For Injection , Amoxycillin 500Mg +Clavulanic Acid 125Mg Tab , Amoxycillin 875Mg + Clavulanic Acid 125Mg Tab , Amoxycillin 200Mg / 5Ml + Clavulanic Acid 28.5Mg / 5Ml Syp In 30 Ml Bott , Amoxycillin 1G + Clavulanic Acid 200Mg, 1.2 Gm Inj , Amoxycillin 250 Mg Cap , Amoxycillin For Oral Susp Containing Amoxycillin Base 125Mg Per 5 Ml After Reconstitution ( Bottle Of 30 Ml ) , Ampicillin 500 Mg Inj , Tab Cefpodoxime 200Mg , Benzathine Penicillin 6, 00, 00 Unit Inj , Ampicillin 250Mg + Cloxacillin 250Mg Inj , Atazanavir 300Mg, Ritonavir100mg , Tenofovir ( 300Mg ) + Lamivudine ( 300Mg ) + Efavirenz ( 600Mg ) Combination Pill , Darunavir Tab 300Mg , Amikacin Sulphate 250Mg / 2 Ml Inj , Azithromycin Dihydrate 250 Mg Tab / Cap , Cefoperazone Sodium 1 Gm Inj , Artemether 80 Mg, Lumefantrine 480 Mg Tablet , Cefotaxime Sodium 1Gm Inj , Cefoperazone Sodium 1Gm & Sulbactum Sodium 1Gm Inj , Ceftazidime 1Gm Inj , Ceftriaxone 1Gm Inj , Cefuroxime 250 Mg Tab , Cefuroxime Susp 125Mg / 5Ml Bott Of 30 Ml , Ciprofloxacin 200 Mg / 100Ml Inj , Ciprofloxacin 250 Mg Tab , Clarithromycin 500 Mg, Inj , Clarithromycin 250 Mg Tab , Clindamycin 300 Mg Cap , Cefixime 100Mg Tab , Doxycycline Cap 100Mg , Erythromycin Ethyl Succinate For Oral Susp Containing Erythromycin Base 100Mg Per 5 Ml Or 125Mg 5 Ml Bottle Of 40 Ml To 60 Ml , Gentamycin Sulphate Inj Im / Iv 40Mg / Ml, 2 Ml Inj , Imipenem 500Mg + Cilastin 500Mg Inj , Levofloxacin 500 Mg In 100 Ml Inj , Levofloxacin 500 Mg Tab , Metronidazole Inj For Iv Use Containing 500Mg Per Bott Of 100 Ml , Norfloxacin 400Mg Tab , Ofloxacin 200 Mg Tab , Piperacillin 4 Gm +Tazobactum 500Mg Lyophilized Inj , Sulphamethoxazole 400 Mg & Trimethoprim 80Mg Tab , Tobramycin 80 Mg, 2Ml Inj , Teicoplanin 400 Mg Inj , Ticarcillin 3G + Clavulanic Acid 100Mg Inj , Vancomycin Cp 500 Mg Inj , Linezolid Infusion 200Mg To 300 Mg / 100Ml , Meropenem 500 Mg Inj , Acyclovir 200 Mg Tab , Acyclovir 800 Mg Tab , Acyclovir 250 Mg Inj , Emtricitabine 200 Mg + Tenofovir 300Mg Tab , Lamivudine 150 Mg + Stavudine 30Mg + Nevirapine 200Mg Tab , Lamivudine 150 Mg Tab , Nevirapine 200 Mg Tab , Zidovudine 300Mg+ Lamivudine 150Mg Tab , Efavirenz 600 Mg, Tab , Zidovudine Tab 300 Mg , Zidovudine 300Mg + Lamivudine 150Mg + Nevirapine 200Mg Tab , Lopinavir 200 Mg + Ritonavir 50 Mg Co-Formulation , Anti Venom, Serum Polyvalent, Dry Vial Of 10 Ml , Bcg Vaccine , Hepatitis B Vaccine 10 Ml , Hepatitis B Human Immunoglobuline ( Hbig ) , Tetanus Human Immunoglobuline. , Injectable Typhoid Vaccine 0.5 Ml , Cell Culture Rabies Vaccine Vial Of 1 Ml , Purified Vero Cell Rabies Vaccine , Inj Varicella Vaccine 0.5Ml , Pneumococcal Vaccine 0.5Ml , Meningococcal Tetravalent Conjugated ( A, C, Y, W-135 ) In 0.5Ml Vial , Serum Anti Rabic Concentrated 10 Ml Amp , Tetanus Toxoid, Purified Absorbed Rubber Capped, Vial Of 5 Ml ( 10 Doses ) , Test Mantoux ( Sufficent For 10 Tests ) , Rabies Immune Globulin ( Human ) Usp, Heat Treated Ampoule. ( Ampoule Containing Not Less Than 150 Iu / Ml Of Human Anti Rabies Immunoglobulin ) , 2 Ml Ampoule / Pfs , Vaccine Measles Multidose Vial Of 10 Ml With Diluent , Airway Long Transparent Oropharyngeal Set Consisting Of Size Size Length 000 3.5, 00 5.0, 0 5.0 1 7.0, 2 9.0 3 10.0 4 1.0 , Adhesive Incise Drape 5X15cm , Apparatus Anaesthitic Face Mask With Air Cushion Transparent Size 0 Infant , Apparatus Anaesthetic Facemask With Air Cushion Transparent Size 1Paediatric , Apparatus Anaesthetic Face Mask ( Anitistatic ) With Air Cushion ( Transparent ) Size 2 Medium , Apparatus Anaesthetic Face Mask ( Antistatic ) With, Air Cushion ( Transparent ) Size 3 Adult With Valve , Apparatus Anaesthetic Face Mask ( Antistatic ) With Air Cushion ( Transparent ) Size 4 , Apparatus Oxygen Inhalation Portable Facemask Disposable For , Apparatus Oxygen Inhalation Portable Tubing 1 Meter With Connector For , Apparatus Oxygen Portable Light Weight Tubing 122 Cm White Mask Adapter And Bayonet Connection For , Apparatus Oxygen Portable Light Weight Detachable Flow Selector For , Apparatus Anaesthetic Face Mask Angle Mount For , Bag Rebreathing Antistatic Rubber 2 Ltr , Bag Mount Complete With Adaptor , Catheter Suction Endobronchial With Terminal Transparent Non Toxic Pvc Tubing Size Fg 10, Length 45 Cm , Catheter Suction Endobronchial With Terminal Transparent Non Toxic Pvc Tubing Size Fg 12 Length 50 Cm , Catheter Suction Endobronchial With Terminal Transparent Non Toxic Pvc Tubing Size Fg 14 Length 50 Cm , Chest Drainage System , Combined Epidural / Spinal Sets , Double Lumen Catherer Cannula With Guide Wire, Introducing Needle And Dilator , Disposable Pressure Transducer Kit With Flushing Device With Compatible Interface Cables , Disposable Gown , Disposable Shoe Cover , Ot Pack Large Gamma Irradiation Sterilised Consisting Of :- Operating Gown Large -1, Operating Gown Medium -2, Gloves Size 7-2 Pairs, Gloves Size 7.5 -1 Pair, Towels 75 X 75Cm -5, Gauze 7.5Cm X 7.5Cm -4 Packs Consisting Of 6 Nos In Each Pack, Gauze Pad -1 , Ecg Electrodes ( Disposable ) , Flow Meter Peak Sterilisable Mouth Piece For. , Laryngoscope Cells ( Aaa Duracell Battery ) , Laryngoscope Cell 1.5 V Dia 13 Mm And Length 51 Mm For , Long I V Line 15 G 100 Cm , Long I V Line 18 G Of 70 Cm , Long I V Line 18 G Of 100 Cm , Manometer Scales , Medium And High Concentration Oxygen Seethrough Masks Pvc With 7 Ft. Oxygen Supply Tubing Adult. , Medium And High Concentration Oxygen Seethrough Masks Pvc With 7 Ft. Oxygen Supply Tubing Paediatric , Mapleson Non Rebreathing System ( Brains Circuit ) , Nasal Cannula Adult , Nasal Cannula Paediatric , Needle Epidural Anaesthesia With Luer Lock Fitting With Styllet 15 G ( Ss ) , Needle Epidural Anaesthesia With Luer Lock Fitting With Styllet 18 G ( Ss ) , Needle Spinal Anaesthesia With Luer Lock Fitting With Styllet 22G ( Ss ) , Needle Spinal Anaesthesia With Luer Lock Fitting With Styllet 24G ( Ss ) , Needle Spinal Anaesthesia With Luer Lock Fitting With Styllet 25G ( Ss ) , Operating Pack Containing :- Sheet Large-3, Trolley Cover-2, Surgeon Gown-4 , Paediatric Anaesthetic Circuit Complete Non-Rebreathing System , Pressure Monitoring Line 100 Cm / 200Cm ( Male / Female ) , Rapid Infusion Set , Seclon Seldy Single Lumen 20 Cm For Vein Cannnulation 15 G , Short Ledercath 20G-8 To 10 Cm Long With Introducer Needle And Guide Wire , Silicon Full Face Mask For Bipap / Cipap Machine , T-Piece In Three Sizes , Three Way Stop -Cock ( Plastic ) , Triple Lumen Catherer Kit Cannula, Guide Wire, Dilator Introducer Needle , Tube Endo-Tracheal Reinforced Pvc Size 3.0 With Out Cuff , Tube Endo-Tracheal Reinforced Pvc Size 3.5 With Out Cuff , Tube Endo-Tracheal Reinforced Pvc Size 4.0 With Out Cuff , Tube Endo-Tracheal Armoured Styllet For , Tube Endo-Tracheal Catherer Mount For , Tube Endo-Tracheal Nasal Size 2.5 Without Cuff. , Tube Endo-Tracheal Nasal Size 3.0 Without Cuff. , Tube Endo-Tracheal Nasal Size 3.5 Without Cuff , Tube Endo-Tracheal Nasal Size 4.0 Without Cuff , Tube Endo-Tracheal Nasal Size 4.5 Without Cuff , Tube Endo-Tracheal Nasal Metal Connection Size : 7 For , Tube Endo-Tracheal Nasal Metal Connection Size:8 For , Tube Endo-Tracheal Nasal Size 5.0 With Cuff , Tube Endo-Tracheal Nasal Size 5.5 With Cuff , Tube Endo-Tracheal Nasal Size 6.0 With Cuff , Tube Endo-Tracheal Nasal Size 6.5 With Cuff , Tube Endo-Tracheal Nasal Size 7.0 With Cuff , Tube Endo-Tracheal Nasal Size 7.5 With Cuff , Tube Endo-Tracheal Nasal Size 8.0 With Cuff , Tube Endo-Tracheal Nasal Size 8.5 With Cuff , Tube Endo-Tracheal Oral With Inflatable Cuff Tube And Pilot Bag 5.5Mm Internal Diameter , Tube Endo-Tracheal Oral With Inflatable Cuff Tube And Pilot Bag 5.0 Mm Internal Diameter , Tube Endo-Tracheal Oral With Inflatable Cuff Tube And Pilot Bag 5.5 Mm Internal Diameter , Tube Endo-Tracheal Oral With Inflatable Cuff Tube And Pilot Bag 7.5 Mm Internal Diameter , Tube Endo-Tracheal Oral With Inflatable Cuff Tube And Pilot Bag 8.0 Mm Internal Diameter , Tube Endo-Tracheal Oral With Inflatable Cuff Tube And Pilot Bag 9.0 Mm Internal Diameter. , Tube Endo-Tracheal Oral With Inflatable Cuff Tube And Pilot Bag 9.5 Mm Internal Diameter , Tube Endo-Tracheal Reinforced Pvc Size 4.5 With Out Cuff. , Tube Endo Tracheal Re-Inforced Pvc Size 5.0 With Cuff , Tube Endo-Tracheal Reinforced Pvc Size 5.5 With Cuff. , Tube Endo-Trachel Reinforced Pvc 6.0 With Cuff , Tube Endo-Tracheal Reinforced Pvc Size 6.5 With Cuff , Tube Endo-Tracheal Reinforced Pvc Size 7.0 With Cuff , Tube Endo-Tracheal Reinforced Pvc Size 7.5 With Cuff , Tube Endo-Tracheal Reinforced Pvc Size 8.0 With Cuff , Tube Endo-Tracheal Reinforced Pvc Size 8.5 With Cuff , Tube Endo-Tracheal Reinforced Pvc Size 9.0 With Cuff , Tube Endo-Tracheal Reinforced Pvc Size 9.5 With Cuff , Tube Tracheostomy With Inflatable Cuff Size 30 Fg , Tube Tracheostomy With Inflatable Cuff Size 33 Fg , Tube Tracheostomy With Inflatable Cuff Size 35 Fg , Tube Tracheostomy With Inflatable Cuff Size 39 Fg , Foleys Balloon Catherer 2 Way, Silicon 16 G , Foleys Balloon Catherer 2 Way Silicon 20 G , Foleys Balloon Catherer 2 Way Silicon 22G , Catherer Foleys Silicon 2 Way 5 Ml Size 16 Fg , Catherer Foleys Silicon 2 Way Size 20 Fg 5 Ml Retention Balloon , Catherer Foleys Silicon 2 Way Size 22 Fg 20-30 Ml Retention Balloon , Hand Gloves, Size 6 1 / 2 Pair Of , Hand Gloves, Size 7 Pair Of , Hand Gloves, Size 7 1 / 2 Pair Of , Gloves Operational Size 8 Pair Of , Knife Bard Parker, Blade Size 1 Fitting ( Commercial No.10 ) Sterile , Knife Bard Parker, Blade Size 1 Fitting ( Commercial No. 11 ) Sterile , Knife Bard Parker, Blade Size 1 Fitting ( Commercial No. 12 ) Sterile , Knife Bard Parker, Blade Size 1 Fitting ( Commercial No. 15 ) Sterile , Knife Bard Parker, Blade Size 2 Fitting ( Commercial No. 20 ) Sterile , Knife Bard Parker, Blade Size 2 Fitting ( Commercial No.22 ) Sterile , Knife Bard Parker, Blade Size 2 Fitting ( Commercial No. 23 ) Sterile , Syringe Disposable, Plastic, Sterile, 2 Ml With Needle , Syringe Disposable, Plastic, Sterile, 5 Ml With Needle , Syringe Dosposable, Plastic Sterile, 10 Ml With Needle , Syringe Disposable 20 Ml , Syringe Disposable 50Ml , Strip Indicators For Sterilisation Control ( For Testing Sterility Of Drums ) Pkt Of 100 , Insulin Disposable Syringe 100 Units In 1Ml , 21 G Needle With Stylet 11Cm Length For Fnac , 22 G Needle With Stylet 11Cm Length For Fnac , Vaccum Blood Collection Tubes With Needles : Edta 3Ml , Vaccum Blood Collection Tubes With Needles : Heparin 3Ml , Vaccum Blood Collection Tubes With Needles : Sterile Tube With Gel-5Ml ( Material-Plastic / Glass ) , Vaccum Blood Collection Tubes With Needles : Sterile Tube With Out Gel - 5Ml , Vaccum Blood Collection Tubes With Needles : Sodium Citrate - 3Ml , Vaccum Blood Collection Tubes With Needles And Additives Sodium Fluoride / Sodium Fluoride+K3edta In Tubes Of Vol 02 Ml , Adhesive Plaster Zinc Oxide 2.5 Cm X 1 Mtr , Adhesive Plaster Zinc Oxide 7.5 Cm X 5 Mtr , Adhesive Plaster Tape 2 Inches Box Of 6 Microfoam , Adhesive Plaster Tape 3 Inches Box Of 4 Microfoam , Adhesive Plaster Tape 4 Inches Box Of 3 Microfoam , Adhesive Plaster Micro Porous Tape 1 Inch Box Of 12 , Adhesive Plaster Micro Porous Tape 2 Inches Box Of 6 , Adhesive Plaster Micro Porous Tape 3 Inches Box Of 4 , Abdominal Binder 10 , Bandage Crepe: 10 Cm , Bandage Crepe:15 Cm , Bandage Elastic Adhesive, 6 Cm X 3 Metres Unstretched And 5-6 Metres When Stretched. , Bandage Open Woven For Plaster Of Paris 10Cmx5m , Bandage, Open Woven Compressed 2.5 Cm X 4 Metres , Bandage Open Wove Uncompressed: 6 Cm X 4 Metres , Bandage Open Wove Uncompressed 10 Cm X 4 Metres , Bandage, Plaster Of Paris 10 Cm X 3 Metres , Bandage, Plaster Of Paris 15 Cm X 3 Metres , Bandage Triangular , Bandage `T` Shaped , Bandage Self Adherent Wrap 15Cm X 4.5Mtr ( Box Of 10 ) , Bandage Self Adherent Wrap ) 10Cm X 4.5Mtr ( Box Of 18 ) , Bandage-Abdominal Binder With Perineal Support - Small , Bandage-Abdominal Binder With Perineal Support - Medium , Bandage-Abdominal Binder With Perineal Support - Large , Bandage Comfortable Casting 7.5Cmx3.6Cm , Bandage Comfortable Casting 12.5Cmx3.6M , Bandage Dvt Stocking Small , Bandage Dvt Stocking - Medium , Bandage Dvt Stocking - Large , Bandage Full Arm Lymphoedema Sleeve, Small , Bandage Full Arm Lymphoedema Sleeve, Medium , Bandage Full Arm Lymphoedema Sleeve, Large , Comfort Caps , Cotton Wool, Absorbent Pkt Of 50 Gm , Cotton Wool, Absorbent Pkt Of 500 Gm , Cotton Wool, Non-Absorbent Pkt Of 500G , Dressing Medicated Adhesive 25 Cm X 6 Cm In A Single Strip Pack , Dressing, First Aid, Unmedicated Sterile Pack , Dressing Medicated Gauze Paraffin, 10 Cm X 10 Cm, Tin Of 24 , Dressing, Shell, Compressed , Dressing Silicon Gel Sheet 56*6 Cm , Dressing Sterile 4 X 4 Box Of 5 , Dressing Sterile 8 X 8 Box Of 3 , Dressing Collagen Wound Management, Size 2 X 3 , Dressing Collagen Wound Management, Size 8 X 14 , Dressing Collagen Wound Management Material, 5 Ml , Dressing Collagen Wound Management Material, 15 Ml , Gauze Absorbent, Folded : 2.5 Cm X 100 Metres , Gauze Surgical, Open Wove, Unmedicated: 60 Cm Wide , Gauze Surgical, Open Wove, Unmedicated : 60 Cm X 3 Metres Packet , Lint Absorbent, Cotton , Pad Abdominal Swab 25 X 25 Cm With Tape 30 Cm , Pad Abdominal Swab 40 X 25 Cm With Tape, 30 Cm , Pins Safety, 2 Sizes 3.89 Cm & 3.33 Cm, Set Of 12 ( 6 Of Each Size ) , Slab, Plaster Of Paris: 10 X 38 Cm, Tin Of 50 , Slab Plaster Of Paris: 75 X 15 Cm, Tin Of 50 , Suspensory Scrotal , Surgeons Caps Disposable , Surgeons Mask Disposable , Transparent Medicated Adhesive Wound Dressing 10 X 25 Cm Box Of 12 , Chromic Catgut Size 1 / 0 Cutting 3 / 8 Circle Needle , Chromic Catgut Size 1 / 0 Rb 3 / 8 Circle Needle , Chromic Catgut Size 2 / 0 Cutting 3 / 8 Circle Needle , Chromic Catgut Size 4 / 0 Cutting 3 / 8 Circle Needle , Haemostatic Clips Titanium Haemostatic Clips Extra Large , Haemostatic Clips Titanium Haemostatic Clips Large , Haemostatic Clips Titanium Haemostatic Clips Medium , Haemostatic Clips Titanium Haemostatic Clips Small , Linear Cutter Reload Unit Blue Cartidge For Use With Safety Lock Out 75Mm , Linear Cutter Reload Unit Blue Cartidge For Use With Safety Lock Out 55Mm , Linear Stapler 30Mm Vascular Reload Unit For Use With Variable Staple Height 1Mm , Linear Stapler 60Mm Reload Unit Heavy Wire For Use With Variable Staple Height 1.5Mm-2.5Mm , Linear Stapler 90Mm Reload Unit Heavy Wire For Use With Variable Staple Height 1.5Mm-2.5Mm , Linear Stapler Reload Unit Wire 30Mm Use With Variable Staple Height 1.5Mm-2.5Mm , Mesh Prosthesis For Hernia-Small Polypropylene Mesh Size 6*11 Cms. Composite Light Wt Mesh Of Polypropylene And Polygalactin 910 / Polygycolic Acid, Size 6 *11 Cms , Monofilament Polyglyconate Synthetic Absorbable Suture Size 2 / 0, 70-75 Cm 1 / 2 Circle Taper Cutting 20-30 Mm , Monofilament Polyglyconate Synthetic Absorbable Suture Size 3 / 0, 70-75 Cm, 1 / 2 Circle Taper Cutting 20-30 Mm , Polyamide Monofilament Size 1, 100 Cm, 1 / 2 Circle Rb 40 Mm , Polyamide Monofilament Size 1 / 0, 100 Cm 1 / 2 Circle Rb 40 Mm , Polydioxanone Size 1, 1.5Cms Loop, 1 / 2 Circle Rb Needle 50-55 Mm , Polydioxanone Size 1, 90 Cms, 1 / 2 Circle Needle 40-45 Mm , Polyglicaprone Size 2 / 0 , 70-75 Cm 1 / 2 Circle Round Body 30 -40 Mm , Polyglicaprone Size 3 / 0 , 70-75 Cm 1 / 2 Circle Rb 20-25 Mm , Polyglicaprone Size 3 / 0, 70-75 Cm 3 / 8 Circle Cutting 20-25 Mm , Polyglicaprone Size 4 / 0 70-75 Cms 3 / 8 Circle Reverse Cutting 15-20 Mm , Polyglicaprone Size 4 / 0, 70-75 Cm, 1 / 2 Circle Rb 20-25 Mm , Polyglicaprone Size 5 / 0 40-45 Cms, Curved Reverse Cutting 15-20 Mm , Polypropylene Blue Monofilament 70-75 Cm Size 3 / 0, 1 / 2 Circle Taper Cut 25 Mm Double Needle , Polypropylene Blue Monofilament 70-75 Cm Size 3 / 0, 3 / 8 Circle Reverse Cutting 12 Mm , Polypropylene Blue Monofilament 70-75 Cm, Size 1 3 / 8 Circle Reverse Cutting, 12 Mm , Polypropylene Blue Monofilament 70-75 Cm, Size 1 / 0 3 / 8 Circle Reverse Cutting, 12 Mm , Polypropylene Blue Monofilament 70-75 Cm, Size 4 / 0, 1 / 2 Circle Rb 13 Mm Double Needle , Polypropylene Blue Monofilament 70-75 Cm, Size 5 / 0 3 / 8 Circle Reverse Cutting, 12-13 Mm Double Needle , Polypropylene Blue Monofilament 70-75 Cm, Size 6 / 0, 3 / 8 Circle Reverse Cutting, 12-13 Mm Double Needle , Polypropylene Blue Monofilament 70-75 Cms Size 2 / 0 3 / 8 Circle Reverse Cutting 12 Mm , Polypropylene Blue Monofilament 70-75 Cms Size 4 / 0 3 / 8 Circle Reverse Cutting 12 Mm , Polypropylene Mesh 15 X 15 Cms, Mesh Prosthesis For Hernia-Medium / Polypropylene Mesh, Size 15Cms*15 Cms.Composite Light Weight Mesh Of Polypropylene And Polygalactin910 / Polygycolic Acid Size 15Cms*15 Cms , Polypropylene Mesh 30 Cms*30Cms, Mesh Prosthesis For Hernia-Medium / Polypropylene Mesh, Size 30Cms*30 Cms.Composite Light Weight Mesh Of Polypropylene And Polygalactin 910 / Polygycolic Acid Size 30Cms*30 Cms , Polypropylene Mesh 6 Cm X 11 Cm ( Box Of 6 ) , Silk Braided Size 0 70-76 Cm Reverse Cutting 3 / 8 Circle Needle 45 Mm , Silk Braided Size 1 / 0 70-76 Cms Taper Cut 1 / 2 Circle Needle 25Mm , Silk Braided Size 1 / 0 Reel 6 Reels X 25 Mtrs , Silk Braided Size 1 / 0, 70-76 Cm Rb 3 / 8 Circle Needle 45Mm , Silk Braided Size 2 / 0 Reel 6 Reels X 25 Mtrs , Silk Braided Size 2 / 0, 70-76 Cm Cutting 3 / 8 Circle Needle 45 Mm , Silk Braided Size 2 / 0, 70-76 Cm Rb 3 / 8 Circle Needle 45Mm , Silk Braided Size 3 / 0, 70-76 Cm Cutting 3 / 8 Circle Needle 45Mm , Silk Braided Size 3 / 0, 70-76 Cm Rb 3 / 8 Circle Needle 45 Mm , Silk Braided Size 3 / 0, 70-76 Cm Rb 1 / 2 Circle Needle 12-16Mm , Silk Braided Size 3 / 0, 70-76 Cm Rb 1 / 2 Circle Needle 20-25 Mm , Silk Braided Size 4 / 0, 70-76 Cm Rb 1 / 2 Circle Needle 20-25 Mm , Silk Braided Size 4 / 0, 70-76 Cm Rb 3 / 8 Circle Needle 12-16 Mm , Silk Braided Size 5 / 0, 70-76 Cm Cutting 3 / 8 Circle Spatulated Needle 12 Mm , Skin Stapler With 35 Stainless Steel Staples , Synthetic Absorabable Polygalactin Rapid Absorption 2 / 0, 80-90 Cms, 1 / 2 Circle Cutting , 30-40 Mm Double Arm , Synthetic Absorbable Polygalactin 910 Rapid Absorption Size 5 / 0 40-45 Cm Curved Reverse Cutting 10-15 Mm , Synthetic Absorbable Polygalactin 910 / Polyglycolic Acid Coated With Polycaprolate Size 1 / 0, 70-90 Cm, 1 / 2 Circle Reverse Cutting 30-40 Mm , Synthetic Absorbable Polygalactin 910 / Polyglycolic Acid Coated With Polycaprolate Size 1 / 0, 70-90 Cms, 1 / 2 Circle Rb 20-25 Mm , Synthetic Absorbable Polygalactin 910 / Polyglycolic Acid Coated With Polycaprolate Size 2 / 0, 70-90 Cms, 1 / 2 Circle Rb 30-40 Mm , Synthetic Absorbable Polygalactin 910 / Polyglycolic Acid Coated With Polycaprolate Size 2 / 0, 70-90 Cms, 1 / 2 Circle Reverse Cutting 30-40 Mm , Synthetic Absorbable Polygalactin 910 / Polyglycolic Acid Coated With Polycaprolate Size 3 / 0, 70-90 Cms, 1 / 2 Circle Rb 20-25 Mm , Synthetic Absorbable Polygalactin 910 / Polyglycolic Acid Coated With Polycaprolate Size 3 / 0, 70-90 Cms, 3 / 8 Circle Reverse Cutting 20-25 Mm , Synthetic Absorbable Polygalactin 910 / Polyglycolic Acid Coated With Polycaprolate Size 4 / 0, 70-90 Cms, 1 / 2 Circle Rb 16-20 Mm , Synthetic Absorbable Polygalactin Rapid Absorption Size 4 / 0 70-80 Cm Curved Cutting 15-20 Mm , Autoclave Labels, Size 2.5 X 5 Cms Packet Of 500 , Blood Sedimentation Rate Pipette, ( Westergren ) Graduated From 0-200 Mm In 1 Mm Divisions. , Glass, Cover Microscopic Rectangular, 22 X 30Mm Made Of Usp No1 Glass , Glass, Cover, Microscope, 18 Mm Square 0.10 Mm ( 1 / 250 ) Thick For Dark Ground Work Pkt Of 14 G , Replaces Glass, Cover, Microscopic, Rectangular Pv 16442 22X50 Mm Made Of Usp No 1 Glass Pkt Of 14 Gm ( Pack Of 10Gm ) , Replaces Glass, Cover, Microscopic, Rectangular Pv 16446 22X40mm Made Of Usp No 1 Glass Pkt Of 14 Gm ( Pack Of 10Gm ) , Hypodermic Disposable Needle Thin Walled 22G 1.5 Inch Long , Marking Pen , Membrane Filters, Pore Size 0.4 Micrones, Diameter 47Mm , Membrane Filters, Pore Size 0.2 Micrones, Diameter 47Mm , Membrane Prefilter, Diameter 47Mm , Micropipettes, Tips For 1 -200 Ul , Micropipettes, Tips For 500 --1000 Ul , Paper, Filter, Round ( Greens No. 795 ) 9 Cm, Pkt Of 100 , Paper, Filter, Square, ( Greens No. 795 ) 51Cm X 51Cm, Pkt Of 100 , Pencil, Marking Glass. , Semi Auto Haematology Cell Counter Printing Paper Roll For , Semi Auto Analyser, Wash Solution For , Semi Auto Analyser, Printing Paper Roll For , Slide, Microscope Thickness 1.15 Mm To 1.35Mm Size 76Mm X 50Mm , Slide, Microscope, Thickness 1.15 To 1.35Mm Size 75Mm X 25Mm , Tube, Kahn 75 Mm X 10 Mm Dia, Rimless , Tube, Test, 200 Mm X 25 Mm , Rimless , Tube, Test, 100 Mm X 12 Mm, Rimless , Acetone Commercial , Acetic Acid Glacial ( Analar ) , Acid Aceticum Glaciale , Acid, Hydrochloric , Acid, Sulphosalicylic Ar , Acid, Sulphuric ( Commercial ) . , Agar Agar In Powder. , Albumin Bovine 20% Solution, Bottle Of 10Ml , Alcohol Amyl , Aluminium Foils. , Alcohol Methyl , Anti Serum To Human Igg, Vial Of 1Ml , Anti Serum To Human Iga, Vial Of 1Ml , Anti Serum To Human Igm, Vial Of 1Ml , Antigen Control Igg + Iga + Igm ( Control Serum ) Vial Of 1Ml , Benedict Solution, Qualitative. , Blood Agar Base ( Infusion Agar ) , Chloroform Ar ( Analytical Grade ) , Cled Agar ( With Thymol Blue ) , Cyanmethohaemoglobin Standard For Haemoglobin Estimation Ampules Of 10Ml. , Congo Red Technical Dye, Bottle Of 100G , Kit For Estimation Of Cpk ( Ck-Nac ) , Deoxycholate Citrate Agar. , Diacetyl Monoxim Ar . , Dimethyl-Aminobenzal-Dehyde Ar , D P X Mounting Med , Drabkins Solution ( Diluting Solution For Haemoglobin Estimation By Cyanmet Haemoglobin Method ) , Ferric Chloride Anhydrous Ar , Glycerine Ar ( Glycerol ) , Kit For Estimation Of Hdl Cholesterol , Hiv I & Ii Rapid Test Kit ( Tridot ) Kit Of 100 Strips , Hepatitis B Surface Antigen ( Hbsag ) Detection Elisa Kit Of 96 Tests , Hiv Antibody 1 & 2 Detection Rapid Test Kit , Keto Diastix Bott Of 50 Strips , Kits For Estimation Of Albumin , Kits For Estimation Of Cholestrol , Kits For Estimation Of Glucose ( 5*60 Ml ) , Kits For Estimation Of Inorganic Phosphorus ( 5*60 Ml ) , Kits For Estimation Of Protein , Kits For Estimation Of Urea ( 5*20 Ml ) , Kits For Estimation Of Uric Acid ( 5*20 Ml ) , Kits For Estimation Of Creatinine ( 4X60 Ml ) , Kits For Estimation Of Alkaline Phosphatase , Kits For Estimation Of Sgot ( Ast ) ( 5*20 Ml ) , Kits For Estimation Of Sgpt ( Alt ) . ( 5*20 Ml ) , Kits For Estimation Of Iron , Lactose Pure For Bacteriological Work , Lead Acetate , Lithium Carbonate Ar , Mac Conkey Agar , Mannitol , Methylene Blue , Mercuric Oxide Red. , Mueller Hinton Agar , Nutrient Broth, Dehydrated Media , Nnnn-Tetramethylphenylene Diamine Dihydrochloride, Bottle Of 10 Gm. , Peptone Water , Potassium Di-Hydrogen Phosphate , Potassium Hydroxide ( Caustic Potash ) . , Propan-2-Ol, Bottle Of 500 Ml. , Pttk Reagent , Sodium Nitroprusside A.R. , Sodium Hypochlorite Solution 10% , Sodium Polyanethol Sulphonate ( Liquid ) . , Stain Crystal Violet , Stain Eosin, Water Soluble , Stain Haematoxylin Powder. , Stain Leishmans Powder. , Stain Methylene Blue , Strips Albumin And Glucose Bottle Of 100 Strips , Triphenyl Tetrazolium Chloride ( Ttc ) Tetrazolium Salt , Triple Sugar Iron Agar , Xylene ( Xylol Pure ) , Kit For Triglyceride Estimation ( 100 Ml ) , Kit For Ldl Cholesterol By Direct Estimation , Kit For Estimation Of Bilirubin ( 4X60 Ml ) , Kit For Estimation Of Ggt ( Gamma Gluteryl Transaminase ) ( 12 X 5 Ml ) , Kit For Estimation Of Cpk-Mb ( 2.5 Ml ) , Kit For Estimation Of Calcium ( 50 Ml ) , Kit For Estimation Of Amylase ( 6X6ml ) , Kit For Estimation Of Ldh ( 12 X 5Ml ) , Rapid Card Screening For Hcv For 50 Test , C Reactive Protein ( Kit For 50 Tests ) , Pt Reagent ( Kit Of 25 Tests ) , Tissue Cassettes & Block Holders , Antibiotic Discs For Sensitivity Testing , Under Water Seal Drainage With Trocar , Under Water Seal Drainage With Heimlich Valve , Urine Collecting Bag With Volume Meter , Water Proof Gowns , Water Proof Dress , Paediatric Vol. Admn Set , Paper Unglazed White 100Cm X 75Cm , Film X-Ray 43.18Cm X 35.56 Cm ( 17 X 14 ) High Speed. , Film X-Ray 38.1Cm X 30.5Cm ( 15 X 12 ) High Speed , Film X-Ray 30.5Cm X 25.4Cm ( 12 X 10 ) High Speed , Film X-Ray 25.4Cm X 20.3Cm ( 10 X 8 ) High Speed , Inj Iohexol 300 Mg / Ml In Vial Of 50 Ml , Salt, Acid Fixing With Hardner , Ultrasound Jelly Tube Of 250 Gm. , Liquid Developer For Automatic Processor With Starter , Liquid Fixer For Automatic Processor , Anti D ( Rho ) Immunoglobulin Monoclonal Human Lyophilised Freeze Dried Vial Of 300 / 350 Mcg , Serum Albumin 20% , Bott Of 50Ml , Serum Albumin 20% ( Low Salt ) , Bott Of 100 Ml , Cannula Iv With Injection Port And Wings Size 16G , Cannula Iv With Injection Port And Wings Size 18 G , Cannula Iv With Injection Port And Wings Size 20G , Cannula Iv With Injection Port And Wings Size 22G , Cannula Iv With Injection Port And Wings Size 24G , Hiv Rapid Test , Dextran 40, 10% V / V In 0.9% Sodium Chloride Solution Bott Of 500Ml , Microtips 200Ul ( Filter Barrier & Sterile ) , Glucose Saline Isotonic Solution In Non-Toxic Disposable Plastic Bott Of 500Ml Ffs , Glucose Solution 5% In Non-Toxic Disposable Plastic Bott Of 500Ml Ffs , Isotonic Glucose Saline N-2 In Plastic Bottle Of 500Ml Capacity , Isotonic Glucose Saline N-3 In Plastic Bottle Of 500Ml Capacity , Isotonic Glucose Saline N-4 In Plastic Bottle Of 500Ml Capacity , Lancet Disposable Pre-Sterilized Size 10 , Modified Gelatin Solution 3.5% In Isotonic Saline 500Ml In Non-Toxic Plastic Container , Scalp Vein Set With Luer Fitting Of Disposable Plastic Size 24 G ( Blister Pack ) , Serum Anti D Igg + Igm ( For Saline Tube Test ) , Serum Haemaglutinating Gp. A ( Anti-B ) ( Monoclonal ) , Serum Haemaglutinating Gp. B ( Anti-A ) ( Monoclonal ) , Serum Haemaglutinating Gp. C ( Anti-Ab ) ( Monoclonal ) , Disposable Plastic Infusion Set For Plasma / Blood ( Presterilised, Pyrogen Free ) Complete With Airline And Nylon Filter Alongwith Airvent , Set Infusion Microdrip Presterilised Disposable For Paediatric Use Consisting Of Nontoxic Pvc Tubing 1700Mm With Drip Chamber Of Minimum 1000Ml Capacity With Cannula Stainless Steel To Deliver 60 Drops Per Ml & With Roller Clamp Of Roll Type And Stainless , Sodium Chloride Solution Isotonic In Nontoxic Disposable Plastic Bottle Of 500Ml Ffs , Sodium Lactate Compound Solution ( Ringer Lactate Solution ) In Nontoxic Disposable Plastic Bottle Of 500Ml Ffs , Triple Lumen Subclavian Vein Cannula , Lactospiral Extension , Disposable Plastic Infusion Set For Iv Fluids ( Presterilised, Pyrogen Free ) Complete With Airline And Nylon Filter Alongwith Airvent , Adjustable Arm Pouch Sling L / M / S , Adjustable, Foldable Walker Plain , Ankle Brace , Ankle Support , Ankle Wrap L , Ankle Wrap Xl , Arc Pad ( Silicon Or Carbon Copolymer ) , Arm Sling Strap , Baseball Finger Splint , Cash Orthosis , Comfort Back Support , Cot Finger Splint , Crutches Elbow Adjustable , Elastic Knee Support , Elastic Shoulder Immobiliser , Finger Exerciser , Flex Finger Splint , Foot Drop Splint , Frog Finger Splint , Functional Knee Support , Heel Cup ( Silicon Or Carbon Copolymer ) , Knee Immobiliser , Lunar Splint , Rib Belt Female , Rib Belt Male , Rs Brace , Solar Splint , Spoon Finger Splint , Stax Mallet Finger Splint , Tennis Elbow Support , Thumb Spica Splint , Walking Aid Monopod Assist , Walking Stick Tetra Pod , Wrist Hand Resting Splint ( Cone ) , Wrist Hand Resting Splint ( Finger ) , Win Splint For Swan Neck Deformity , Wrist And Forearm Splint , Mouth Prop And Air Way 1Cm Bite , Mouth Prop And Air Way 1.2 Cm Bite , Mouth Prop And Airway 1.5Cm Bite , Pipette Red Cell Giving Dilution 1 In 100 , Pipette White Cell Giving Dilution In 10 , Sitagliptin 50 Mg Tab , Rotaheler , Cough Expectorant Syp 5 Ml Containing Diphenhydramine Hcl 14.08Mg Ammonium Chloride 0.138 Gm, Sodium Citrate 57.03Mg , Menthol 1.14 Mg In Flavoured Syp Base Bott Of 100Ml , Cough Sedative Syp Each 5 Ml Containing Chlorpheniramine Maleate 2.5Mg Guiaphenesin 100Mg Noscapine 15Mg Sodium Citrate 60Mg In Flavoured Base Bott Of 100 Ml , Delivery System For Ipratropium Bromide Rotacap , Delivery System For Salmeterol+ Fluticasone Rotacaps With Pin Puncture Technology , Delivery System For Salmetrol Rotacap , Injectable Typhoid Vaccine 2.50 Ml , Clobazam 10 Mg Tab , Aceclofenac 100Mg +Thiocholchicoside Tab , Aceclofenac 100Mg +Paracetamol 500Mg Tab , Aceclofenacsr 200Mg Tab , Aceclofenac 100Mg +Paracetamol 500Mg + Chlorzoxazonetab , Aceclofenac 100Mg +Paracetamol 325Mg +Serratiopeptidase , Tab Amitriptyline 10 Mg , Acenocoumarol 2 Mg Tab , Amlodipine 2.5 Mg Tab , Entacavir 0.5Mg Tab , Novamix ( 30 / 70 ) Insulin Pen Fill 100 Units / Ml 3Ml Cart , Lispro Humalog Mix 50 ( 03Ml ) 100Unit / Ml ) Inj , Insulin Premixed Biphasic 40 Iu Per Ml ( 30% Human Neutral Plus 70% Human Isophane Insulin ) , 10 Ml Inj , Cough Benadril Syp 100Ml , Betahistine Dihydro Chloride 16Mg Tab , Clozapine 50 Mg Mg Tab , Clozapine 25 Mg Tab , Escitalopran 20 Mg Tab , Etophylline Bp 77 Mg And Theophylline Ip 23Mg Tab , Serratiopeptidase 5Mg Tab , Azithromycin 500 Mg Tab / Cap , Citicoline 500Mg Tab , Clinidipine 10 Mg Tab , Clinidipine 5Mg Tab , Serum Haemaglutinating Gp.D ( Anti-D ) ( Monoclonal ) , Diclofenac Sodium 100Mg Sr Tab , Divaloprox Sodium 250Mg Srtab , Esmoprazole 40Mg Tab , Fungal Diastase 50Mg + Pepsin 5Mg+ Lipase Tab , Gliclazide 80Mg Tab , Hydrochlorothiazide12.5Mg Tab , Methycobalamine 1500Mcg Tab , Methycobalamine 500Mcg Tab , Nitrofuranton 100Mg Tab , Pantoprazole 40Mg + Domeperidone 10Mg , Pioglitazone 30Mg Tab , Torsemide 100Mgtab , Ticagrelor 90Mg Tab , Antioxidant Cap , Acelofenac + Thiocolchicosde 4Mg Tab , Clotrimazole Powder 100Gm , Ditiazem 60Mg Tab , Dabigatran Em 110Mg Tab , Mesalamine 800Mg Tab , Ntrogycerine 2.6 Tab , Olmesartatan 20Mg Tab , Piracetam 400Mg Tab , Rabeprazole 20Mg Tab , Trihexphenidyl 2Mg Tab , Vitamin E 400 Mg Cap , Voglibose 0.3Mg Tab , Cremaffin 170Ml Syp , Foracort Rotacaps 250Mcg , Multivitamin & Minerlas Syp 200Ml , Cervical Collar ( Size-L, M ) , Lumber Belt Size -Large , Moxilong 0.2Mg Tab , Moxilong 0.3Mg Tab , Trimetazidine 35Mg Sr Tab , Cream Aloevera , Calamine Lotion , Liquid Parafin 120Ml , Band Aid , Disposable Masks , R / C Budertol ( Formetrol+ Budesonide ) , Oint Thrombophob , Knee Cap Medium / L / Xl / S , Insulin Syringe40 Iu In1ml , Paracetamol 650Mg Tab , Novofine Needle , Syp Sodium Picosulphate , Amifru 40Mg Tab , Oint Miconazole , Verapamil Hydrochloride 40Mg Tab , Metformin 1000 Mg Tab , Ointpovidone Iodine 20Gm , Levosalbutamol 1.25Mg + Ipratropium 500Mcg Res , Bisoprolol 5 Mg Tab , Syp Disodium Hydrogen Citratere , Teneligliptin 20Mg , Hbsag Rapid Test Kit Of 50 Test , Malaria Rapid Kit Of 25 Test , Ra Factor Kit Of 25 Test , Spirit , Widal Kit ( 4*5 Ml ) , Acitretin 25 Mg Cap , Alfuzocine 10 Mg + Dutastrideride 5 Mg Ab , Amisulpride 100 Mg Tab , Amisulpride 50 Mg Tab , Bisoprolol 2.5 Mg Tab , Cefuroxime 250 Mg Tab , Chlorthalidon 12.5 Mg Tab , Chlorthalidon 6.25 Mg ( Ctd ) Tab , Dapagliflozin 10 Mg Tab , Dapsone 100 Mg Tab , Diane / Ginette 35 Tablet , Donepezil 5 Mg + Mementine 5 Mg Tab , Novonac Eye Drop , Epleronone 25 Mg Tab , Evening Prime Rose Oil Cap , Chlordiazepoxide ( 10Mg ) Tab , Lisinopril 5 Mg Tab , Lacosamide 100 Mg Tab , Maxepa Tab , Montelukast 10 Mg +Fexofenadine 120 Mg ( Combination ) , Tab , Luliconazole Cream 0.1% W / W Tube Of 20 Gm , Omega Faty Acid Cap , Omeprazole 20 Mg + Domperidone 30 Mgcap , Ritonavir100mg Tab , Sildenafil Citrate 20 Mg Tab , Sildosin 8 Mg Tab , Sildosin 8 Mg + Dutasteride 0.5 Mg Tab , Levodopawith Carbidopa110 Mg Tab , Tolperisone 150 Mgtab , Warfarin 2 Mg Tab , Warfarin 3 Mg Tab , Dextromethorphan, Chlorpheniramine And Phenaylephrine Syp Bott Of 100 Ml , Pirfenidone 200 Mg Tab , Tab Empagliflozin 25 Mg , Dapagliflozin 25 Mg Tab , Nicorandil 05 Mg Tab , Canagliflozin 100 Mg Tab , Rivaroxaban 20 Mg Tab , Crp Kit , Distilled Water , Ecg Paper 50*20 ( Bpl ) , Ecg Paper A4 Thermal ( Bpl ) , Ecg Paper 1200A ( Bpl Cardiat ) , Ecg Paper 50*20 ( Bpl Cardiat 6108 T ) , Esr Tube ( Westergreen Metyhod ) , Haematology Sysmax Cell Pack Of 20 Lit , Haematology Sysmax Stomotolyser , Sterile Urine Container Of 50 Ml , Trypsin And Chymotrypsin Tab , Foleys Balloon Catherer 2 Way, Silicon 14 G , Alfuzocine 10 Mg Tab , Amiloride Hydrochloride 2.5 Mg + Hydroclorthiazide 25 Mgtab , Amlodipine 10 Mg Tab , Amlodipine 10 Mg + Bisoprolol 2.5 Mgtab , Antioxidant Cap , Atorvastatine 10 Mg + Fenofibrate 160 Mg Tab , Caripiril 1100 Mg Tab , Indomethacine 75 Mg Sr , Cilastozole 100 Mg Tab , Citicoline 500Mg + Piracetam 400 Mgtab , Clinidipine 20 Mg Tab , Clopidogrel 75 Mg + Aspirin 75 Mg Tab , Clopidogrel 75 Mg +Aspirin 150 Mgtab , Clonazapine 5 Mg Tab , Desvenlafaxine 50 Mg Tab , Diltiazem 30 Mg Tab , Dothiopine Hcl 75 Mg Tab , Ebastin 10 Mg Tab , Pre And Pro Biotic Scht , Econorm Scht , Asprin 75 Mg + Atorvastatine10 Mgtab , Esmoprazole 40 Mg Tab , Rabeprazole Dsr Cap , Etoricoxib 60 Mg Tab , Flunarizine 5 Mg Tab , Gabapentin 300 Mg + Mecobalamine 500 Mg Cap , Pregabalin 150 Mg +Mecobalamine 1500 Mg Cap / Tab , Gliclazide40 Mg + Metformin 500 Mg Tab , Gliclazide40 Mg Tab , Glucosamine 250Mg + Diacerine 50 Mg Cap , Heptral 400 Mg Tab , Hydroxyzine 10 Mg Tab , Imipramine 25 Mg Tab , Leveril Fort Tab , Levetericetam 1000 Mg, Tab , Linagliptin 5 Mg + Metformin 500 Mg , Meloxicame 15 Mg Tab , Mesalamine 400 Mg Tab , Tab Methylcobalamine 500 Mcg , Tab Methylcobalamine + Alfa Lupoic Acid + Folic Acid Cap , Metoprolol Tarterate 50 Mg Xr Tab , Metoprolol Tarterate 25 Mg Tab , Metoprolol Tarterate 25 Mg Xr Tab , Metolazone 2.5 Mg Tab , Neurobion Fort Tab , Olmesartatan 20Mg + Hct 12.5 Mgtab , Olmesartatan 40Mg Tab , Pantoprazole 40Mg + Levosulpraide 75 Mg , Piracetam 800Mg Tab , Pregabalin 150 Mg +Mecobalamine 500 Mg Cap / Tab , Ramipiril 5Mg +Hydrochlorothiazide 12.5 Mg Tab , Ranolazine 500 Mg Tab , Ribavirin 200 Mg Cap , Rosuvastatin 10 Mg Tab , Serratiopeptidase 10 Mg + Diclofenac Sodium 50 Mg + Paracetamol 325 Mg Tab , Sevelamer 800 Mg Tab , Sodium Valproate 500 Mg Tab , Telmisartan 40 Mg + Amlodipine 5 Mg Tab , Telmisartan 80 Mg, Tab , Tranexamic Acid 500 Mg + Mefenamic Acid 250 Mg Tab , Ursodeoxycholic Acid 300 Mg Tab , Valganciclovir 450 Mg Tab , Betamethasone Dipropionate 0.025 % W / W, Neomycin 0.5 % W / W, Clotrimazole 1 % W / W Cream Tube Of 20G , Dermadew Lotion , Brimonidine Tartrate 0.2% + Timilol Eye Drops , Lotion Venusia , Povidone Iodine Powder , Pottacium Chlororide ( Kesol ) Syp , Oral Decogestant Syp ( Tixlix ) , Iron Sucrose Inj , Ferric Carboxymaltose 500 Mg / 10 Ml Inj Inj , Benzyl Peroxide 5% Gel Of 20 Gm Tube , Ketoconazole Cream 2% Tube Of 30 Gm , Entogermania Resp , Dengue Rapid Test Of 25 Test , Whatmen Filter Paper , Widal Igg Igm Rapid Kit , Fluouride Tube , Glucometer Strips ( Counter Ts ) Bott Of 50 Test , Normal Saline 100 Ml , Azilasartan 40 Mg Tab , Torsemide 10 Mg + Spiranolactonetab , Vericose Bein Stocking ( Size - S ) , Vericose Bein Stocking ( Size - L ) , Vericose Bein Stocking ( Size -M ) , Vericose Bein Stocking ( Size - Xl ) , Sacubiteil + Valsartan 50 Mg Tab , Darunavir600 Mg + Ritonavir 100 Mg Tab , Raltegavir 400 Mg Tab , Moxonidine 0.3 Mg Tab , Prasugrel Hcl 10 Mg Tab , Silymarin 140 Mg Tab , Solifinacin 5 Mg Tab , Venlafaxine 75 Mg Tab , Glycopyrolate 2 Mg Tab , Metformin 500 Mg +Glimpride 1 Mg Tab , Metformin 500 Mg +Glimpride 2 Mg Tab , Yucca Sensa Core Reagent Pack , Yucca Sensa Core Cleaner , Artesunate 60Mg Inj , Hiv / Hbsag Cesarean Disposible Kit , Skin Grafting Blade , Oxygen Face Mask Disposible ( Adult ) , High Concerntration Oxygen Face Mask Disposible ( Adult ) , Central Line 15 Fr , Cell Clean Sysmax 50 Ml , Arkamin 100 Mcg Tab , Yucca Gram Stain 100 Ml , Trop-I , Amitriptyline 25 Mg + Chlordiazapexide , Venlafaxine 150 Mg Er Tab , Typhoid Conjugated Vaccine , Rosuvastatin 10 Mg + Fenofibrate Tab , Ehanyl Estrodiol And Cyprotexote Acetate Tab ( Ginetate-35 ) , Trazodone Hcl 100 Mg Tab , Cefodoxime 250 Mg Tab , Goserelin 3.6 Mg Prefilled Syringe , Torsemide 05 Mg Tab , Perfectil Tab , Atenolol + Chlothalidone Tab , Sodium Valproate And Valporic Acid Cr200 Mg Tab , Glucose Strips Along With Free Meter , Rabiprazole + Levosulbutamol Tab , Tinagliptin 20 Mg Tab , Thiamine 2 Ml Inj , Prednisolon E / D , Atropine E / D , Ketoralac Dt Tab , Osteocalcium Syp , Mucain Antacid Gel , Moxyfloxacin E / D , Piclin Syp 150 Ml , Ryles Tube S-8 , Ryles Tube S-10 , Ryles Tube S-12 , Ryles Tube S-14 , Ryles Tube S-16 , Pig Tail Cath , Cabargolin 0.25 Ng Tab , Cvp Manometer , Succinyl Scolin Inj , Methyl Ergomatin Inj , Insulin Degludac , Victofol Inj , Iso-Propanol 60-65% And Benzalkonium Chloride Skin Disinfectant, 63Gm / 0.025 Gm In 100 Gm , Pot. Monopersulphate 1% ( Potassium Peroxymonosulfate Is Same Item ) , Hydrocortisone Acetate 25Mg / Ml, 5 Ml Inj , Capecitabine 500 Mg Tab , Chlorambucil 2.0Mg Tab , Selegiline Hcl 5Mg Tab , Ecosprin 75Mg+ Atorvastatin 10 Mg Tab , Silver Sulphadiazine 1% Cream W / V Jar Of 20 Gms , Cisapride 10 Mg Tab , Ritodrine 50 Mg / 5 Ml, Inj , Mesacol 800 Mg Tab , Mesacol 1 Gm Sr Tab , Anti Spasmodic Drops , Simethicone 80Mg & Charcoal 400 Mg Tab , Neostigmide 15 Mg Tab , Natamycin 3% Eye Drops In 3 Ml Bott , Pilocarpine Nitrate Eye Solution 2% Bott Of 5 Ml , Fluvoxamine 50 Mg Cap , Cough Logences , Urokinase 5 Lacs Unit + Diluent Inj , Desmopressin Acetate Inj 4 Mcg / Ml, 1 Ml Ampoule , Ethionamide 250 Mg Tab , Finifibrate 200 Mg`Tab , Finifibrate 160 Mg`Tab , Theophylline Sr 400 Mg Tab , Cefaclor 250 Mg Cap , Cefaclor 500 Mg Cap , Indinavir 400 Mg Tab , Stavudine 30Mg + Lamivudine 150Mg Tab , Stavudine 30Mg Tablet , Sitagliptin 100 Mg Tab , Amoxycillin 500 Mg Cap , Clindamycin 300 Mg 2 Ml Inj , Paracetamol Infusion 100 Ml Bott , Atazanavir 300Mg Tab , Atazanavir 300Mg + Ritonavir 100 Mg Tab , Crizotinib 250 Mg Tab , Doxazocin 1 Mg Tab , Emtricitabine 200 Mg Tab , Atazanavir 300Mg + Ritonovir 50 Mg Tab , Glipizide 5Mg+ Metformin 500 Mgtab , Losartan 25 Mg + Hct 12.5 Mg Tab , Mementin Hcl 5 Mg , Insulin Exenatide 100 Iu Per Ml 4 Ml Inj , Insulin Detimir 100 Iu Per Ml 3 Ml Inj , Insulin Lispro 50 / 50 , Insulin Human Actrapid 50 / 50 , Ranelozaline 500 Mg Tab , Multivamin & Minerlas Tab , Vitamin D3 Cap , Kitoconazole Shampoo Bott Of 60 Ml , Salsun Shampoo Bott Of 120 Ml , Gemfebrozil 60 Mg Tab , Keto Analog 200 Mg , Inj Darbepoietin Alpha 40 Mcg , Capd Fluid 1.5% , 5 Lit Bag With Mini Cap ( Baxter ) , Capd Fluid 2.5% , 5 Lit Bag With Mini Cap ( Baxter ) , Abacavir 300 Mg Tab , Abacavir 600 Mg Tab , Absulte Alcohol , Ada Kit , Kit For Ckmb , Leishmen Stain , Liqd Amonia , Occult Blood Estimation Kit , Pap Stain Rapid , Raticulocyte Count Stain , Stain Fuchsin Basic , Sterile Swab Sticks , Vdrl Reagent 100 Test , Lumber Belt Size-Xl , Lumber Belt Size-M , Lumber Belt Size-S , Rabeprazole +Domperidone Cap , Hearing Aid Bte , Hearing Aid Itc , Hearing Aid Cic , Rituximab 100 Mg Inj , Zolidrnic Acid 5 Mg Inj , Tpn 1Ltr Triple Chamber Bag For Central Vein Contain Proteins 30-50 Gm / I , Li [ Pid 30 / 40 Gm / Iu , Prostaglandin Ei 500 Mcg Inj Vial Of 1 Ml , Ascorbic Acid 100 Mg Tab , B1 50 Mg Inj , Amoxycillin 250 Mg + Clavulanic Acid 50 Mg Inj , Gancyclovir 500 Mg Inj , Alcohal Dehydrated Bott Of 100 Ml , Microtips 1000 Ul ( Filter Barrier And Sterile ) , Capd Fluid 7.5% , 5 Lit Bag With Mini Cap ( Baxter ) , Scalp Vein Set With Luer Fitting Of Disposable Plastic Size 21 G ( Blister Pack ) , Scalp Vein Set With Luer Fitting Of Disposable Plastic Size 22 G ( Blister Pack ) , Scalp Vein Set With Luer Fitting Of Disposable Plastic Size 23 G ( Blister Pack ) , Scalp Vein Set With Luer Fitting Of Disposable Plastic Size 25 G ( Blister Pack ) , Abdominal Belt Size-S , Abdominal Belt Size-M , Abdominal Belt Size-L , Dvt Stocking Grade-Ii Below Knee Size-S , Dvt Stocking Grade-Ii Below Knee Size-M , Dvt Stocking Grade-Ii Below Knee Size-L , Dvt Stocking Grade-Ii Full Leg Size-S , Dvt Stocking Grade-Ii Full Leg Size-M , Dvt Stocking Grade-Ii Full Leg Size-L , Stocking Full Leg Size-S , Stocking Full Leg Size-M , Stocking Full Leg Size-L , Stocking Below Knee Size-S , Stocking Below Knee Size-M , Stocking Below Knee Size-L , Fuji Dry Film Of Cr Size-8X10 , Fuji Dry Film Of Cr Size-10X12 , Tab Codeine Phosphate 15 Mg , Clove Oil Bott Of 5 Ml , Sitagliptin 25 Mg Tab , Betaxolol E / D 0.25%-0.5 % Bott Of 5 Mlbott , Formetrol Fuumrate 12 Mcg Dry [ Powder , Tab Acebrophyllin 200 Mg , Tab Aprimilast 300 Mg , Tab Dabigatron 150 Mg , E / D Soliwax , Tab Empagliflozine 25 Mg , Hand Wash 200 Ml , Tab Tolperine 50 Mg , Inj Isulin Rizodeg , Inj Intacept 25 Mg , Tab Rosuvastatin 20 Mg , Roller Bandage 4 Inch , Tab Telmisartan 20 Mg , Tab Glimepride 4 Mg , Tab Ticagrelor 60 Mg , Tab Ivabridine 5 Mg , Tab Lenvetinin 10 Mg , Tab Pacreatin 80 Mg , Inj Glargin 100 Iu , Inj Novarapid Penfill Cart , Tab Tenfovir Alfenamide Fumarate , Tab Pirfenidone 200 Mg , Tab Rifaximin 400 Mg , Inj Intracept 50 Mg , Lot Diprovate , E / D Nepafenac , Inj Vitcofol , Brucella Kit , Cikungunya Card , Fouchest Reagent Bott Of 500 Ml , Barium Chloridebott Of 500 Ml , Sulpher Powder Bott Of 500 Ml , 3.8 % Sodium Citrate Bott Of 500 Ml , Wbc Diluting Fluid Bott Of 100 Ml , Microtips 500 Ul , Urine Ketone Strip Bott Of 50 Test , Diamond Glass Writing 240 / 0-240 , Quaility Controll Kit For Electrolyte Analyser Yucca Sensa Core St - 200 Cl , Hba1c Agappe Mispa I2 30 Test , Aso Agappe Mispa I2 30 Test , Rf Agappe Mispa I2 30 Test , Tab Telmisartan 40 Mg + Amlodipin 10 Mg + Hydrochlorthiazide 12.5 Mg , Teething Gel , Oint Silver Sulphadiazine 1 % Tube Of 25 Gm , Tab Antispasmodic Dicyclomin 10 Mg +Dextroproxyphen 65 Mg+ Acetaminophen 400 Mg , Tab Acarbose 25 Mg , Insulin Premixed 40 Iu Per Ml ( 50% Human Neutral Plus50 % Human Isophane Insulin ) , 10 Ml Inj , Isulin 40Iu / Ml Vial Of 5 Ml , Syp Calcium Phosphate , Sachet Calcium Polysyrene Sulphonate Powder 15 Gm ( K Bind ) , E / D Betamethasone + Neomycin , Tab Salbutamol 4 Mg , Vit D3 Sachet 60000 Iu , Mixtard Of Soluble Insulin 30% + Isophane Insulin 70 % Human Source 100 Iu / 3Ml , Tab Glimepride 1 Mg + Metformin 1000 Mg , Tab Serratiopeptidase 10 Mg+ Diclofenac 50 Mg , Tab Tenfovir 300 Mg + Emtricetabine 200 Mg + Efaverinz 600 Mg , Tab Torsemide 20 Mg , Tab Amlodipine 5 Mg + Bisoprolol 2.5 Mg , Cap Pregablin 75 Mg + Methylcobalamin 500 Mg , Tab Itraconazole 200 Mg , Cap Multivitaminand Minerals , Tab Isosorbid Mononitrate 30 Mg , Tab Escitalopram 10 Mg + Clonazepam 0.5 Mg , Lot Amorolfine 5 % , Tab Ginkgobiloba 60Mg + Paracetum 400 Mg , Tab Benfomet Plus , Tab Mesacolamine 1200 Mg , Inj Nervigen Plus , Tab Enzar Hs , Inj Novamix ( 50 / 50 ) Insulin Penfill 100 Iu / Ml , Tab Darunavir 600 Mg , E / D Brinzolomide , Tab Rasaglin 0.5 Mg , Cap Sildosin 4 Mg + Dutesteride 0.5 Mg , Tab Valacyclovir 2000 Mg , Tab Rifiximine 550 Mg , Tab Metformin 500 Mg + Glimepride 1 Mg + Voglibose 0.2 Mg , Tab Metformin 500 Mg + Glimepride 2 Mg + Voglibose 0.2 Mg , Tab Aspirin 75 Mg +Clopid 75 Mg + Atorvastatin 10 Mg , Tab Aspirin 75 Mg +Clopid 75 Mg + Atorvastatin 20 Mg , Tab Losartan 50 Mg + Hydrochlorthiazide 12.5 Mg , Glass Test Tube12*100 Mm , Strips For Detection Of Urine Suger & Protein , Iinj Resperidone 50 Mg , Romovac , Ecg Paper 210X14 , Hinged Knee Brace L , Hinged Knee Brace M , Tab Metolar Xr 100 Mg , Silodosin 8 Mg Tab , Tab Dytor Pluse , Tab Tenoric 50 , Tab Quetiapine 25 Mg , Syp Paracetamol 250 Mg / 5 Ml , Protinex Pow Pack Of 250 Gm , Inj Tenecteplace 40 Mg , Inj Lisposomal Amphotericin B 50 Mg , Ung Neosporine Eye Ointment , Ung Neosporine Skin Ointment , Powder Neosporine , Tab A To Z , Pylo Kit , Tab Cobadex , Pop Cast 10 Cm , Pop Cast 15 Cm , Walker Foldable , Covid-19 Antigen Kit Of 25 Test , Blood Grouping Sera Anti A , Blood Grouping Sera Anti B , Blood Grouping Sera Anti Ab , Blood Grouping Sera Anti D , Bacteria Filter , Hma Filter , Disposible Spirometer , Tab Heptral , Tab Lycorex Forte , Hcg Test Strips , Fumigator Solution Microgen ( Ds-125 ) , Vtm Kit Of 50 Tube , Tab Fabipiravir 200 Mg , Tab Fabipiravir 400 Mg , Ppd Tuberculin , N-95 Mask ( Venus ) , Erba 360- H Diluant , Erba 360- H Lyse , Erba 360- H Clean , Erba 360- H Control High , Easy Lyte Na / K / Cl / Ca / Li Pack , Easy Lyte Stat Cleaning Soln , Glass Test Tube12*75Mm , Erba 360- H Control Low , Erba 360- H Control Nom
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 13
41.
Educational and Research Institute #10410465 Price Bid
Tender For Renovation Of Ramakkalmedu Tourism Project At Idukki-FENCING 2 Clearing grass and removal of the rubbish up to a distance of 50 m outside theperiphery of the area cleared. 3 Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposedearth to be levelled and neatly dressed.All kinds of soil 4 Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) 5 Supplying and fixing PVC coated wire mesh welded and galvanized steel fabriccoated with.2mmmarine grade polyvinyl chloride(PVC) size 1.5 metre height, 3 inch dia MS tube aspole at a distance of 1.5 meter, with 2inch x2 inch PVC coated net. 6 PLAYING EQUIPMENTS 7 Roto Multi play Fun System-12 including Roto Palm Tree, Palm Tree is made up ofLLDPE Plastic inrotational moulding processes. Roto Sparrow, Roto House Canopy with Chimney,House Canopy with Chimney is made up of LLDPE roto moulded plastic.This is inshape of House Roof. House Canopy size will be minimum – 1500 mm X 1600 mm.It has fitted with chimney on top of canopy. FRP Rock Climber 5’Ht, Rock Climber is made up of Fibre Reinforce Plastic. Injection moulded rock hold are fitted on sameplatform .It has gradent of 65 degree with the ground. Minimum 6 rock hold will beof nylon in three colours. Support frame should be given from the back for strength.Roto Slide Entry - Slide entry is made up of LLDPE plastic in rotational moulding ,FRP Ladder 5’Ht 8 Monkey Climber:-Product Area : 10.7Ft x 3.1Ft, Safe Area : 16.7Ft x 6.1Ft, AgeGroup : 5 to 12 Years, Users at a Time : 4 to 6 Nos, Monkey climber side frame ismade up of 80 NB GI B-Class pipe.• Ladder frame is made up of 20 NB GI B-Class pipe & attached to main frame withnylon clamp.• Top frame is made up of 40 NB & 20 NB GI B-Class pipe. 9 Double Arc Swing with Character :- Product Area : 9.3Ft x 3.5Ft, Users at a Time: 2 Nos, Age Group : 4 to 14 Years.Safe Area : 13Ft x 13Ft, Top bar is made up of50 NB G.I B-Class pipe having 2 sets of bearing assembly & profile plate at end. •The length of top bar is 2.8m long.•Side frame is made up of 80 NB G.I B-Class pipe having 2 nos. Side frame is bendone piece in UShape. • Special design pipe clamps hold casting assembly of bearings.It gives noiseless and smoothmovement to the swing. Round cobalt coated short linkchain of 8mm diameter (electric butt welded) as per ISI: 2429, which can carry aweight of 400 kg. The chain is rubberised coated .S.S s-hook is used to hang chain inrubber belt. Seat is made up of rubber with non-skid surface with nylon lining insandwich pattern. Belt seat should be 13mm thick. S.S. triangular hook is moulded inbelt in such a way that it won’tproject from the top surface of the belt seatsRotomoulded LLDPE plastic sparrow character is fixed on top bar 10 SOLAR LIGHT 11 Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposedearth to be levelled and neatly dressed.All kinds of soil 12 Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 nominal size) 13 Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) 14 Centering and shuttering including strutting, etc. and removal of formfor:Foundations, footings, bases of columns, etc for mass concrete 15 Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelThermo - Mechanically Treatedbars of grade Fe-500D or more 16 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand). 17 Solar street light:Supply installation termination, testing and commissioning 30wSolar LED Street Light, All in one type with 60w Pannel, 12.8V 18AhLithium Phero Phospate LifePo4 Battery, Protection individually for eachcomponents Motion sensor and Hybrid Charge controller. The pole shall 5 mtr GIConical Pole Made by CNC Filament machine, and be painted with anti corrosivepaint with required thickness for protection. Each street light pole shall have properindepentent earth at each location (Excluding civil work) 18 LANDSCAPING 19 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking ofserviceable materials and then disposing of surplus soil, by spreading and neatlylevelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after floodingtrench with water (excluding cost of imported earth, sludge or manure). 20 Supplying and stacking of good earth at site including royalty and carriage upto 5k.m. lead complete (earth measured in stacks will be reduced by 20% for payment). 21 Supplying and stacking sludge at site including royalty and carriage upto 5 k.m. leadcomplete (sludge measured in stacks will be reduced by 8% for payment). 22 Supplying and stacking at site dump manure from approved source, includingcarriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8%for payment) :Screened through sieve of I.S. designation 20 mm 23 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with waterincluding disposal of uprooted vegetation. 24 Fine dressing of the ground 25 Spreading of sludge, dump manure and/or good earth in required thickness as perdirection of officer-in-charge (cost of sludge, dump manure and/ or good earth to bepaid separately). 26 Mixing earth and sludge or manure in the required proportion specified or directed bythe Officer-in-charge 27 Grassing with selection No. 1 grass including watering and maintenance of the lawnfor 60 days or more till the grass forms a thick lawn, free from weeds and fit formowing including supplying good earth, if needed (the grass and good earth shall bepaid for separately).In rows 5 cm apart in both directions 28 Grassing with selection No. 1 grass including watering and maintenance of the lawnfor 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall bepaid for separately).With grass Turf 29 Supplying and Planting Eugeniya 2.5 feet height 30 Supplying and Planting Melastoma 2 feet height 31 Supplying and Planting maranta 32 Supplying and Planting polgadott 33 Supplying and Planting Ajuga 34 Supplying and Planting Areliya 35 ENTRANCE GATE & TICKET COUNTER 36 Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposedearth to be levelled and neatly dressed.All kinds of soil 37 Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundation etc. in layers not exceeding 20 cm in depth, consolidating each depositedlayer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 38 Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 nominal size) 39 Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) 40 Reinforced cement concrete work in beams, suspended floors, roofs, having slope upto 150 landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases up to floor five level excluding thecost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 41 Centering and shuttering including strutting, etc. and removal of formfor:Foundations, footings, bases of columns, etc for mass concrete 42 Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelThermo - Mechanically Treatedbars of grade Fe-500D or more 43 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 44 Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cmor nearest available size confirming to IS 2185 part I of 1979 for foundation andplinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete 45 Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600 x 600 mm. 46 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trussesetc., including cutting, hoisting, fixing position and applying a priming coat ofapproved steel primer, including welding and bolted with special shaped washers etc.complete.Hot finished welded type tubes 47 Providing and applying plaster of paris putty of 2 mm thickness over plastered surfaceto prepare the surface even and smooth complete 48 Finishing walls with water proofing cement paint of required shade:New work (Twoor more coats applied @ 3.84 kg/10 sqm) 49 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Twoor more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exteriorprimer applied @ 2.20 kg/10 sqm) 50 Finishing with Epoxy paint (two or more coats) at all locations prepared and appliedas per manufacturers specifications including appropriate priming coat,preparation of surface, etc. complete.On steel work 51 Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixing with dashfasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating50 micron) 52 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layeror graded wood particle board conforming to IS : 12823 Grade I Type II, in panellingfixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions ofEngineer - in- Charge.Pre-laminated particle board with decorative lamination on oneside and balancing lamination on other side 53 Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per theCost Index (Place) : Idukki, GST : 18%Printed On architectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mmthickness 54 providing clay roof tiling (Weinerbergeror equivalent material)in required size as perthe architectural drawings and the direction of engineer in charge including all fittingand fixtures, scaffolding etc, complete 55 Providing and fixing walls and false ceiling with 7.5 mm thick PVC plain panel boardceiling of approved quality in aluminium frame work with necessary screws etccomplete (aluminium frame work shall be paid separately) 56 Fixing of Aluminum composite panels, composed of laminate 2 color paintedaluminum sheets with plastic cores, in the plate form and with the thickness of 4mm 57 ENTRANCE GATE & TICKET COUNTER - ELECTRICAL WORKS 58 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVCconduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C 59 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.20 mm 60 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.32 mm 61 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm 62 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.5/6 amps switch 63 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.15/16 amp switch 64 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.3 pin 5/6 amp socket outlet 65 Supplying and fixing modular blanking plate on the existing modular plate &switch box excluding modular plate as required. 66 Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.8 Module 67 Supplying and fixing suitable size GI box with modular plate and cover in front onsurface or in recess, including providing and fixing 3 pin 5/6 amps modular socketoutlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to beused in non residential buildings). 68 Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door 69 Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door 70 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes inthe existing MCB DB complete with connections, testing and commissioning etc. asrequired.25 amps 71 Supplying and fixing TP sheet steel enclosure on surface/ recess along with16/25/32amps 415 volts C curve TP MCB complete with connections,testing and commissioning etc. as required. 72 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2pole and earth,metal enclosed plug top along with 20 amps C curve, SP,MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover forthe socket out let and complete with connections, testing and commissioning etc. asrequired. 73 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, andproviding masonry enclosure with cover plate having locking arrangement andwatering pipe etc. (but without charcoal/ coke and salt ) as required. 74 S/F 400mm Wall Fan with pulling cord : Supplying and fixing 400 mm sweep wallfan with 3 speedpositions with pulling cord and giving connections, etc. as per the direction ofengineer in charge as required. 75 HANDRAIL 76 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trussesetc., including cutting, hoisting, fixing position and applying a priming coat ofapproved steel primer, including welding and bolted with special shaped washers etc.complete.Hot finished welded type tubes 77 Finishing with Epoxy paint (two or more coats) at all locations prepared and appliedas per manufacturers specifications including appropriate priming coat,preparation of surface, etc. complete.On steel work 78 BACK SIDE GATE 79 Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposedearth to be levelled and neatly dressed.All kinds of soil 80 Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 nominal size) 81 Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mmnominal size) 82 Reinforced cement concrete work in beams, suspended floors, roofs, having slope upto 150 landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases up to floor five level excluding thecost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 83 Centering and shuttering including strutting, etc. and removal of formfor:Foundations, footings, bases of columns, etc for mass concrete 84 Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelThermo - Mechanically Treatedbars of grade Fe-500D or more 85 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 86 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trussesetc., including cutting, hoisting, fixing position and applying a priming coat ofapproved steel primer, including welding and bolted with special shaped washers etc.complete.Hot finished welded type tubes 87 Finishing walls with water proofing cement paint of required shade:New work (Twoor more coats applied @ 3.84 kg/10 sqm) 88 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Twoor more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exteriorprimer applied @ 2.20 kg/10 sqm) 89 Finishing with Epoxy paint (two or more coats) at all locations prepared and appliedas per manufacturers specifications including appropriate priming coat,preparation of surface, etc. complete.On steel work 90 RENOVATION OF TOILET BLOCK 91 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Twoor more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exteriorprimer applied @ 2.20 kg/10 sqm) 92 Wall painting with acrylic emulsion paint of approved brand and manufacture to givean even shade:Two or more coats on new work 93 Providing and fixing white vitreous china pedestal type water closet (European type)with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I. brackets, 40 mm flush bend, overflowarrangement with specials of standard make and mosquito proof coupling of approvedmunicipal design complete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required :W.C. pan with ISI marked whitesolid plastic seat and lid 94 Providing and fixing white vitreous china flat back half stall urinal of size580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) withwaste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P.brass, including painting of fittings and cutting and making good the walls and floorswherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern 95 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require:White Vitreous China Flat backwash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 96 Providing and fixing mirror of superior glass ( of approved quality) and of requiredshape and size with plastic moulded frame of approved make and shade with 6 mmthick hard board backing :Rectangular shape 1500x450 mm 97 Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the basesupport for tank. 98 Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS: 893115 mm nominal bore 99 Providing and fixing PTMT pillar cock of approved quality and colour.15 mmnominal bore, 107 mm long, weighing not less than 110 gms 100 Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia 101 Providing and fixing PTMT urinal cock of approved quality and colour.15 mmnominal bore, 80 mm long 42 mm high and 30 mm wide with BSP female threadsweighing not less than 48 gms . 102 Supplying and fixing CP Towel rod 45cm or nearest available length including cost ofmaterials and labour charges etc complete as per the direction of site Engineer-in-charge 103 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 104 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm widewith minimum distances of 37 mm from wall face with concealed fittingsarrangement of approved quality and colour, weighing not less than 88 gms 105 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement andtesting of joints complete as per direction of Engineer -in-Charge. Internal work -Exposed on wall25 mm nominal outer dia pipes 106 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement andtesting of joints complete as per direction of Engineer -in-Charge. Internal work -Exposed on wall32 mm nominal outer dia pipes 107 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings including fixing the pipe with clamps at 1.00 m spacing. Thisincludes jointing of pipes & fittings with one step CPVC solvent cement andtesting of joints complete as per direction of Engineer -in-Charge. Internal work -Exposed on wall40 mm nominal outer dia pipes 108 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermalstability for hot & cold water supply, including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includesjointing of pipes& fittings, with one step CPVC solvent cement and the cost ofcutting chases and making good the same including testing of joints complete as perdirection of Engineer-in-Charge. Concealed work, including cutting chases andmaking good the wall etc.15 mm nominal outer dia pipes 109 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 32 mm pipe10Kgf/cm2 110 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 50 mm pipe10 kgf/cm2 111 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 6Kgf/cm2 - External work - Exposed on wall 112 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00m spacing . This includes jointing of pipes with one step PVC solvent cement andtesting of joints complete as per direction of Engineer-in-Charge 110 mm dia 6Kgf/cm2 - External work- Exposed on wall 113 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of30 mm thickness. The laminated shall be moulded with fire resistant gradeunsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mmthick and shall be filled with suitable wooden block in all the three legs. The frameshall be covered with fiber glass from all sides. M.S. stay shall be provided at thebottom to steady the frame. 114 Providing and fixing to existing door frames.30 mm thick Glas Fibre ReinforcedPlastic (FRP) panelled door shutter of required colour and approved brand andmanufacture, made with fire - retardant grade unsaturated polyester resin, moulded to3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame andsuitable blocks of seasoned wood inside at required places for fixing of fittings, castmonolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856,including fixing to frames. 115 Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600 x 600 mm. 116 Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. 117 RENOVATION OF TOILET BLOCK -ELECTRICAL WORKS 118 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVCconduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C 119 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.20 mm 120 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.32 mm 121 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.40 mm 122 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.5/6 amps switch 123 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. asrequired.15/16 amp switch 124 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.3 pin 5/6 amp socket outlet 125 Supplying and fixing modular blanking plate on the existing modular plate &switch box excluding modular plate as required. 126 Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.1 or 2 Module 127 Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.3 Module 128 Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.4 Module 129 Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.6 Module 130 Supplying and fixing suitable size GI box with modular plate and cover in front onsurface or in recess, including providing and fixing 3 pin 5/6 amps modular socketoutlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to beused in non residential buildings). 131 Installation of exhaust fan in the existing opening, including making good the damageconnection testing, commissioning etc. as required.Upto 450 mm sweep 132 Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door 133 Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door 134 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes inthe existing MCB DB complete with connections, testing and commissioning etc. asrequired.25 amps 135 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, andproviding masonry enclosure with cover plate having locking arrangement andwatering pipe etc. (but without charcoal/ coke and salt ) as required. 136 S/F 400mm Wall Fan with pulling cord : Supplying and fixing 400 mm sweep wallfan with 3 speedpositions with pulling cord and giving connections, etc. as per the direction ofengineer in charge as required. 137 Supply of 305 mm sweep, 1400 rpm heavy duty exhaust fan with front guard,working on 230 V AC supply, etc. as per the direction of engineer in charge asrequired 138 REOVATION OF CANTEEN 139 Demolishing cement concrete manually / by mechanical means including disposal ofmaterial within 50 metres lead as per direction of Engineer - in-Charge.Nominalconcrete 1:3:6 or richer mix (i/c equivalent design mix) 140 Demolishing brick work manually / by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar 141 Dismantling doors, windows and clerestory windows (steel or wood ) shutterincluding chowkhats, architrave, holdfasts etc. complete and stacking within 50metres lead:Of area 3 sq. metres and below 142 Dismantling steel work in built up sections in angles, tees, flats and channelsincluding all gusset plates,boltd, nuts, cutting rivets, welding etc. includingdismembering and stacking within 50 metres lead. 143 Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cmor nearest available size confirming to IS 2185 part I of 1979 for super structure up tofloor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etccomplete. 144 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 145 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of crosssection90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of30 mm thickness. The laminated shall be moulded with fire resistant gradeunsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mmthick and shall be filled with suitable wooden block in all the three legs. The frameshall be covered with fiber glass from all sides. M.S. stay shall be provided at thebottom to steady the frame. 146 Providing and fixing to existing door frames.30 mm thick Glas Fibre ReinforcedPlastic (FRP) panelled door shutter of required colour and approved brand andmanufacture, made with fire - retardant grade unsaturated polyester resin, moulded to3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame andsuitable blocks of seasoned wood inside at required places for fixing of fittings, castmonolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856,including fixing to frames. 147 Providing and fixing aluminium work for doors, windows, ventilators and partitionswith extruded built up standard tubular sections/ appropriate Z sections and othersections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointedmechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating50 micron) 148 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layeror graded wood particle board conforming to IS : 12823 Grade I Type II, in panellingfixed in aluminum doors, windows shutters and partition frames with C.P. brass /stainless steel screws etc. complete as per architectural drawings and directions ofEngineer - in- Charge.Pre- laminated particle board with decorative lamination onboth sides 149 Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with EPDM rubber / neoprene gasket etc. complete as per thearchitectural drawings and the directions of Engineer - in -Charge. ( Cost ofaluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mmthickness 150 Providing and laying vitrified floor tiles in different sizes (thickness to be specified bythe manufacturer) with water absorption less than 0.08% and conforming to IS :15622, of approved make, in all colours and shades, laid on 20 mm thick cementmortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cementand matching pigments etc., complete.Size of Tile 600 x 600 mm. 151 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Twoor more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exteriorprimer applied @ 2.20 kg/10 sqm) 152 Wall painting with acrylic emulsion paint of approved brand and manufacture to givean even shade:Two or more coats on new work 153 Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling ofapproved quality in aluminium frame work with necessary screws etc complete(aluminium frame work shall be paid separately) 154 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting,fixing in position and applying a priming coatof approved steel primer, including welding and bolted with special shaped washersetc. complete 155 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and makingcurvature (wherever required) and fitting the same with necessary stainless steel nutsand bolts complete, i/c fixing the railing with necessary accessories & stainlesssteel dash fasteners, stainless steel bolts etc., of required size on the top of the floor orthe side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall beconsidered excluding fixing accessories such as nuts, bolts, fasteners etc.) 156 Reinforced cement concrete work in beams, suspended floors, roofs, having slope upto 150 landings, balconies, shelves, chajjas, lintels, bands,plain window sills, staircases and spiral stair cases up to floor five level excluding thecost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 157 Steel reinforcement for R.C.C work including straightening, cutting, bending, placingin position and binding all complete upto plinth levelThermo - Mechanically Treatedbars of grade Fe-500D or more 158 Supplying and fixing deck sheet of 3mm thk of including Composite Deck sheet is asteel profile with ribs, embossments which helps in binding with concrete slab andtogether forms a part of the floor structure. This interlocking between the concreteand the floor deck cretes a reinforced concrete slab that serves the dual purpose ofpermanent shuttering and reinforcement. 159 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983with C.I. brackets and stainless steel plug 40 mm, including painting of fittings andbrackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm 160 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete.Semi rigid pipe40 mm dia 161 Providing and fixing PTMT pillar cock of approved quality and colour.15 mmnominal bore, 107 mm long, weighing not less than 110 gms 162 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solventcement and testing of joints complete as per direction of Engineer-in-Charge 50 mmdia 6Kgf/cm2 - External work - Exposed on wall 163 RENOVATION OF CANTEEN - ELECTRICAL WORKS 164 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mmFRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVCconduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C 165 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.20 mm 166 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.32 mm 167 Supplying and fixing of following sizes of medium class PVC conduit along withaccessories in surface/ recess including cutting the wall and making good the same incase of recessed conduit as required.40 mm 168 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. As required.5/6 amps switch 169 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.15/16 amp switch 170 Supplying and fixing following modular switch/ socket on the existing modular plate& switch box including connections but excluding modular plate etc. asrequired.3 pin 5/6 amp socket outlet 171 Supplying and fixing modular blanking plate on the existing modular plate &switch box excluding modular plate as required 172 Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.1 or 2 Module 173 Supplying and fixing following Modular base & cover plate on existing modularmetal boxes etc. as required.3 Module 174 Supplying and fixing suitable size GI box with modular plate and cover in front onsurface or in recess, including providing and fixing 3 pin 5/6 amps modular socketoutlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to beused in non residential buildings). 175 Installation of exhaust fan in the existing opening, including making good the damageconnection testing, commissioning etc. as required.Upto 450 mm sweep 176 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes 177 Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door 178 Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 V, on surface/ recess, complete with tinned copper bus bar,neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door 179 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,residualcurrent circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes inthe existing MCB DB complete with connections, testing and commissioning etc. asrequired.25 amps 180 Supplying and fixing TP sheet steel enclosure on surface/ recess along with16/25/32amps 415 volts C curve TP MCB complete with connections,testing and commissioning etc. as required. 181 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2pole and earth,metal enclosed plug top along with 20 amps C curve, SP,MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover forthe socket out let and complete with connections, testing and commissioning etc. asrequired. 182 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, andproviding masonry enclosure with cover plate having locking arrangement andwatering pipe etc. (but without charcoal/ coke and salt ) as required 183 S/F 400mm Wall Fan with pulling cord : Supplying and fixing 400 mm sweep wallfan with 3 speedpositions with pulling cord and giving connections, etc. as per the direction ofengineer in charge as required. 184 Supply of 305 mm sweep, 1400 rpm heavy duty exhaust fan with front guard,working on 230 V AC supply, etc. as per the direction of engineer in charge asrequired 185 SITTING BENCHES 186 Supplying and fixing Stone garden sitting bench with 1.5 metre length ,450 mm clearHight from groundlevel 450 mm wide seating ,450 mm wide back rest as approved by engineer incharge 187 WASTE BIN 188 FISH BIN :- Product Area diameter 1.3 ft, Capacity 64 Ltr.Material of waste bin shallbe of FRP 189 FROG BIN :- Product Area diameter 2 ft, Capacity 84 Ltr.Material of waste bin shallbe of FRP. 190 RENOVATION OF RAIN SHELTER 191 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Twoor more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exteriorprimer applied @ 2.20 kg/10 sqm) 192 Finishing with Epoxy paint (two or more coats) at all locations prepared and appliedas per manufacturers specifications including appropriate priming coat,preparation of surface, etc. complete.On concrete work 193 Wall painting with acrylic emulsion paint of approved brand and manufacture to givean even shade:Two or more coats on new work 194 PROPOSED SIGNAGES 195 Earth work in excavation by mechanical means (Hydraulic excavator)/manual meansover areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 196 Manufacturing, supplying and fixing retro reflective overhead signage boards madeup of 2 mm thick aluminimum sheet, face to be fully covered with high intensity andencapsulated lens type heat activated retro reflective sheeting conforming to type - lllof ASTM-D-4956-01 as approved by Engineer-in-Charge, letters, borders etc. as perIRC: 67-2001 in silver white with blue colour back ground and with high intensitygrade, pasted on substrate by pressure sensitive adhesive backing which shall beactivated by applying pressure conforming to class ll of ASTM -D-4956-01 andfixing the same to the plate of structural frame work by means of suitable sizedaluminimum alloys, rivets or bolts & nuts @ 300 mm centre to centre all alongthe periphery as well as in two vertical rows along with theft resistant measures,including the cost of painting with two or more coats of epoxy paint in grey colour onthe back side of aluminimum sheet including appropriate priming coat. The rateincludes the cost of rounding off the corners, lowering down the structural framework from the gantry, fixing and erecting the same in position all complete as perdrawings, specification and direction of the Engineer-in-Charges. (Structural framework including M.S. plate to be provided separately. Rectangular area of the sheetonly shall be measured for payment ).Overhead informatory road signage 197 Providing and fixing Destination board fixing in main entrance of compound wall top 198 MALAMUZHAKI SCULPTURE 199 Ornamental painting work for columns with required shade and including design& drawing, and direction of engineer in charge, complete finish 200 KURAVANUM KURATHIYUM 201 Ornamental painting work for columns with required shade and including design& drawing, and direction of engineer in charge, complete finish Please Enable Macros to View BoQ information
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
42.
Defence #10399420 Price Bid
Tender For Provision Of Certain Srw And Minor Work At Age B/R-I Under Ge Babina. ; 1 Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. 2 M&L for painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 3 M&L forPre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engineer in charge. 4 Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified. 5 M&L for Brick work with sub class B old size bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. 6 M&L for Brick work with sub class B old size half bricks thick straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. 7 Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided forcomplete all as specified at site complete all as specified and as directed. 8 M&L for old size brick work with subclass `B bricks, straight or curved on plan exc 6m mean radius, built inCM(1:6) etc complete all as specified and directed. 9 M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1(using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the likecomplete all as specified and as directed. 10 M&L, Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 11 Demolition of PCCin any description and in any positionetc complete all as specified and directed by Engr-in-Charge. 12 M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub base offlooring finishing cement concrete surface even and smooth using extra cement 13 M&L for 20 mm thick screed bed in CM 1:6 for laying floor tiles/kota stone etc complete all as specified and directed by Engr-in-Charge. 14 M&L for Machine cutkota stone slab flooring 20-25mm thick over cement screedbase laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. 15 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. 16 M&L for Machine cutkota stone slab flooring 20-25mm thick over 10mm cement plaster in CM 1:4 in riser of steps, skirting, dado and pillar laid over cement screed and jointed including rubbing and polishing complete all as specified and directed by Engr-in-Charge. 17 M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. 18 M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 19 M&L 60 mm thickness M-40 Grade , machine pressed precast concrete Inter locking paver blocksany shape & size with grey cement and pigment conf to IS-15658-2006laid dry oversand cushion complete all as specified and directed by Engr-in-Charge.(Sand cushion shall be measured and paid separately) 20 Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed. 21 M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement onconc/brick surfaces in CM 1:6, complete all as specified and as directed 22 M&L for rendering 15mm thick on fair faces of wall even and smooth finish without using extra cement onconc/brick surfaces in CM 1:4, complete all as specified and as directed 23 M & L for preparation of new plastered surface and applying three coat of white wash on wall surface complete all as specified and as directed. 24 M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer completeall as specified and as directed. 25 Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed 26 Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed. 27 S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed 28 S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed 29 S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed.. 30 S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet for PVC doors etc complete all as specified and directed by Engr-in-Charge. 31 S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed by Engr-in-Charge. 32 S&F Pressed steel frames for doors(125x60) mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified and directed by Engr-in-Charge. 33 Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. 34 M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats and sunken floor complete all as specified and directed. 35 S&F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge. 36 S&F factory made fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8.20 (a),divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed 37 S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed 38 S&F of CRC sheet box type steel window with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed by Engr-in-Charge. 39 S&F of CRC sheet box type steel window with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded all as specified and directed by Engr-in-Charge. 40 S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and directed by Engr-in-Charge.. 41 S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded all as specified and directed by Engr-in-Charge.. 42 M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and directed by Engr-in-Charge. 43 S & F3 mm thick sheet glass, Ordinary quality and glazing with putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. 44 S & F3 mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed. 45 M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of rex oxide primer over 10 cm width or girth complete all as specified and as directed. 46 M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed. 47 M & L for complete removal of existing treatment from surface ofwall all as specified and as directed by the Engineer-in-Charge 48 M & L forpreparing old decorated surfaces of wall and applying two coat of white wash on old surface of wall all as specified and as directed by the Engineer-in-Charge 49 M&L for preparing old decorated surfaces of wall and applying two coats cement base paintall as specified and as directedby the Engineer-in-Charge. 50 S&L for Steel rolling shutters (Thickness of laths 1.25mm),but gear operated type with chain wheel and hand chain, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:push pull or manual type inclduing shaft and all items which are required to established of the shutter completed and including taking down of existing rolling shutters all as specified and directed by Engr-in-Charge. 51 S&F forSafety lever locks mild steel with 4 levers forrolling shutters all as specified and directed by Engr-in-Charge. 52 S&L forBall bearing for rolling shutters completed all as specified and directed by Engr-in-Charge. 53 Excavation in trenches n exc 1.5 m wide and n. exc 1.5 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed by Engr-in-Charge. 54 M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc complete all as specified and directed by Engr-in-Charge. 55 M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in foundation, including rafts footing, foundation beams, plinth beams, bases for columns etc complete all as specified and directed by Engr-in-Charge. 56 M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars etc complete all as specified and directed by Engr-in-Charge. 57 Use & waste rough finished Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. 58 M&L forTMT bars Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and directed. 59 M&L forTMT bars Mild steel bars 8mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified and directed. 60 M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in coping including weathering slightly rounded or chamfered angles and throating as directed including necessary form work where required. 61 M&L for 15mm thick rendering in CM (1:4) on fair/un-even surfaces of brick work or concrete surfaces to be finished even and smooth without using extra cement, complete all as specified and directed. 62 M&L for 20mm thick Granite (of any type) work (table rubbed and polished)for wall lining (veneering towall) 12mm thickin cementmortar (1:3) and pointing with white cement (1:2)using marble dust with admixture of pigment to match with shade of granite. 63 M&L three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed. 64 S&FFramed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete similar work conforming to Fe.410.Gde-E-250all as specified and directed. 65 S&F framed guard bars, barred iron doors, ladders, framedbalusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed. 66 M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed. 67 S & F 600 mm mild steel skeleton tower bolts with steel sheets pressed plate and staple, stove enamelled black and mild steel bright bolt complete all as specified and directed. 68 S & F 375 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and inclduing a minimum of 6 bolts and nuts, four on bolts plate and two on staple complete all as specified and directed. 69 M&L hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed . 70 M & L 75 mm thick Cement concrete type C2,1:3:6 (40mm graded aggregate) as in sub base, including form work complete all as specified and directed by Engineer-in-Charge 71 Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge. 72 M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 Grade complete all as specified and directed by Engineer-in-Charge 73 M&L forProviding, cement concrete type B1 (1:2:4) using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge. 74 Demolition of PCC/lime concrete (Other than Ground flooors) terracingincluding felt in any description and in any position over roof etc complete all as specified and as directed by the Engineer-in-Charge. 75 M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. 76 Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. 77 M&L, roughening surfaces of old concrete roof by picking ,sweeping clean and washing down with water to remove dust etc and applying a coat of cement slurry @ 3 Kg per Sqm complete all as specified and directed. 78 M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed. 79 M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately. 80 Supply only integral water proofing compound complete all as specified and as directed. 81 M&L applying water proofing treatment with the following:- (a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane. 82 M&L for toping layer of precast machine pressed cement concrete tiles of size 25cm x 25cm x 22 mm thick laid in neat cement slurry over and including 15 mm thick cement mortar screed in 1:4 and joints between the tiles to be filled with grey cement and no pigment complete all as specified and directed. 83 Taking up or down existing steel tubing 15mm dia and connections including cleaning for refixing or removal to store complete all as specified and as directed. 84 Taking up or down existing steel tubing 20mm dia and connections including cleaning for refixing or removal to store complete all as specified and as directed. 85 Supplying, fixing, jointing and testing galvanised iron tubing 15mm dia medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed. 86 Supplying, fixing, jointing and testing galvanised iron tubing 20mm dia medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed. 87 Fixing only old steel tubing 15mm dia and connections obtained from taking down against item No 84 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed. 88 Fixing only old steel tubing 20mm dia and connections obtained from taking down against item No 85 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings complete all as specified and as directed. 89 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and as directed. 90 S&F 500 litre cap rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part - I including S and F of 20mm dia Ball valve high pressure of PTMT with epoxy coatedaluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight20mm-210gms) complete all as specified and as directed. 91 S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed 92 S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. 93 M&L for non skidcoloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.06sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:4) completeall as specified and as directed. 94 M&L for non skidcoloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:4) completeall as specified and as directed. 95 M&L for non skidcoloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in Skirting etc set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc and including rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tiling etccompleteall as specified and as directed. 96 M&L for joint free glazed coloured tiles 350x250x7mm/450x350x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc including rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tilingcomplete all as specified and as directed 97 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and as directed. 98 M&L for 50mm thick cement concrete type B2, 1:2:4 (40mm graded aggregate) as in floor/hardstanding finished even and smooth without using extra cement complete all as specified and directed. 99 Demolition ofBrickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and directed. 100 M&L brick work with fly ash bricks(FASB) confirming to IS 12894, of strength M-10 straightor curved on plan exc 6m mean radiusbuilt cement mortar 1:6 complete all as specified and as directed. 101 M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. 102 M & L for Preparation of new plastered surfaceof wall and applying two coat of OBD over a coat of putty complet all as specified and as directed. 103 M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat putty completeall as specified and as directed. 104 Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed. 105 Refixing same opening and shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed. 106 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to thestiles & rails with suitable PVC sheet beading, and joined together with solvent cementall as directed and specified by Engineer-in-Charge. 107 S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete complete all as specified and as directed. 108 M & L Secound class hardwood Plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. 109 S&F 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and as directed. 110 S&F 18/19 mm Cover fillet of external teak wood lipping 6mm thick fixed with nail complete all as specified and as directed. 111 S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and as directed. 112 S&F, locally fabricated 35 mm thick IInd class HW partly paneled& Partly gauged & skeleton shutters open rebated and prepared to receive glass/gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a),divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed 113 S&F Pressed steel frames for doors(125x60) mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. 114 S&F Pressed steel frames for doors(105x60) mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and as directed. 115 M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed 116 S & F powder coated anodised aluminium sliding window/ventilator shutter three track section for frames of weight not less then 1.17 kg/Rm and sliding section for shutter frame all round with aluminium section of weight not less then 0.42 kg/Rm top and bottom rail of shutter of weight not less than 0.368 Kg/m in two pannels and shutter with including necessary aluminium fittings and 5mm thick selected quality tinted glass and third one with and incl stainless steel wiremesh etc cover aluminium decogrill as approved by GE fixed with standed aluminium channel out side with incl handle cleat, glazing clip special auto lock dry set rubber gasket complete all as specified and as directed 117 M&L, preparing for old woodensurfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed. 118 S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white Make :- Hindware with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) &including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. 119 S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white Make :- Hindwarwith inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed. 120 S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type)including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed. 121 S $ F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 122 S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed. 123 S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flangecomplete all as specified and as directed. 124 S&F in repair 15mm bore cast copper alloy chromium plated angle cock with flangecomplete all as specified and as directed. 125 S&F in repair 15mm bore fancy type chromium plated bib cock long body with flangeetc complete all as specified and as directed. 126 S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixedall as directed. 127 S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed. 128 S & F CP Towel rail 20mm D type, 60CMlong between flanges complete all as specified and directed. 129 S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixed complete all as specified and as directed. 130 S&F stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed. 131 S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed. 132 S&F in repair 25 mm dia chromium plate curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge. 133 Demolition and breaking up drain pipes (Salt glazed ware, AC/PVC/CI or Reinforced concrete) set in cement mortar in floors or wall in 100mm dia meter complete all as specified and as directed. 134 S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. 135 S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or walland complete all as specified and directed. 136 S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. 137 S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. 138 S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and as directed. 139 S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. 140 S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. 141 S&F MS chromium plated peg set of five fixing with wall complete all as specified and as directed. 142 M&L for 100mm internal dia Salt-glazed stoneware drain pipes laid in trenches and joints as specified. 143 M&L for type D-2 (1:4:8) concrete bed to drain pipes including packing under, and hunching against the side of pipe after they are laid and tested, in 100mm dia pipe complete all as specified and as directed. 144 Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil complete all as specified and as directed. 145 Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed. 146 Removing excavated at a level n.exc 50m m above the starting point complete all as specified and as directed. 147 M & L for applying one coat of putty all as specified and as directed by the Engineer-in-Charge 148 M & L for applying one coat of oil bound distemper all as specified and as directed by the Engineer-in-Charge 149 M&Lfor applying one coats cement base paint on wallall as specified and as directedby the Engineer-in-Charge. 150 M&L, Preparing old plastered/unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. 151 M&L, Preparing old plastered/unplastered surfaces of wall and applying one coat of white wash complete all as specified and directed. 152 Cutting holes in brick walls built in cement mortar for inserting hold fasts/pipe and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. 153 M&L for 10 mm thick rendering in cement mortar 1:4 on sunken surface finished even and fair complete all as specified and as directed. 154 M & L for application of one coat of water based bitumen emulision primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust &dirt.Lay water proofing treatment with polymetric memberane 3 Kg/ sqm standard consisting of 90 micron, HMHDPE torch on memberane over a coat of blown bitumen 85/25 @ 1.2 Kg/sqm on top of memberane and providing 25 mm thick sand cushioning to recieve lean concrete in sunken floor complete, all as directed and as specified. 155 Taking downcarefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge. 156 Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. 157 Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. 158 M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed . 159 Description same as per item No 160 above but one fan point controlled by one switch & regulator. 160 Description same as per item No 160 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. 161 Description same as per item No 160 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. 162 Description all as per item No 160 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. 163 S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. 164 S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and asdirected. 165 S&F switch piano flush button type 15 Amp single pole one way complete all as specified and asdirected. 166 S&F socket outlet2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. 167 S&F ceiling rose,surface bakelite 63 x50mm three terminals completeall as specified and asdirected. 168 S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed. 169 S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , C series, connected with copper lugs complete all as specified and as directed. 170 S&F Rigid non-metallic PVC conduit 25mm dia(external) ISI marked concealed and including cutting necessary chases on wall/ceiling surface for drawing of conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts,saddles, pipe hooks etc. complete all as specified and as directed. 171 Supply and lay river bed sand free from sharp materialsa for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed . 172 Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 16 sqmm 4 core as per IS 7092 Pt-I completeall as specified and as directed. 173 S&F MCB single pole 6 to 32Amps 240 V,10KA, C series, connected with copper lugs complete all as specified and as directed. 174 Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm,factory madeof specified make , complete all as specified and directed. 175 S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification. 176 M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts gradecable drawn into conduit (Existing / new)including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directedNote:- (a) Two runs of6 sqmm cable and one run of 6 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment.(b) New conduit and conduit accossories shall be measured separately. 177 Supply and fixing in repair 22W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. 178 S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed 179 S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in AppndxB to PS . 180 S & F delux fan regulator electronic rotary step type 240Volts 50Hzscomplete all as specified as directed 181 S&F VTPN DB-DPX Box 4 way double door with provision for DPX MCCBs as out going no MCBs 8+12 complete all as specified and as directed. 182 S&FMCB having breaking capacity of 16KA 415V 4 pole having rating capacity of 63 Amp 100% ICU complete all as specified and as directed. 183 Supply and laying GI pipe 50mm bore LIGHT GRADE in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed. 184 M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
43.
Heavy Industries and Public Enterprises #10390733 AOC
Vertical Extension & Other Development Works at Academic Block Annex-2 Palayad Campus, Kannur University, Kannur, Kerala under PM-USHA scheme- 1 Civil work -General Structural work 2 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge25 mm average thickness 3 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars upto 12 mm diameter 4 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge. 5 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar 6 Core Cutting of RCC slabs(12cm Maxi.thickness) by using mechanical core cutting equipment of required diameter of the pipe in full depth etc to the satisfaction of engineer in charge including all cost and conveyance materials and labours charge etc complete (dia 80-200mm) 7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 8 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work ( Payment shall be made on the cross sectional area of R.C.C. or R.B work) as per direction of Engineer-in-charge. 9 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 10 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock 11 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 13 Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) 14 Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 15 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level 16 Extra for providing richer mixes at all floor levels. Note:- Excess/less cement over the specified cement content used is payable/ recoverable separately.Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum). 17 Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 18 Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 19 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 20 Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 21 Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) 22 Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges 23 Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick. 24 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more 25 Block work & Finishing Work 26 Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 27 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 28 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) 29 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 30 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) 31 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 32 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats 33 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 34 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 35 Add for plaster drip course / groove in plastered surface or moulding to R.C.C. projections. 36 Teracotta Clay Jali work, For Building work, minimum 7.5 cm thick as per approved design and pattern of Engineer in charge in super structure above plinth level upto floor V level with cement mortar 1:4 (1 cement : 4 coarse sand) with neat finish, polishing work all complete. 37 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wallwith suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre.The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channelof 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufactures specification and direction of engineer in charge all complete.75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG),plaster board conforming to IS : 2095 : (part 3) 1996 (Board with BIS Certification marks) 38 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 39 For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 40 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides 41 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness 42 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm 43 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in- charge. 44 Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm 45 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 46 Joinery 47 Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. 48 Providing and fixing to existing door frames.30 mm thick Fiberglass Reinforced Plastic (F.R.P) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used all filler material throughout the hollow panel, casted monoolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS : 14856, complete as per direction of Engineer- in-charge. 49 Providing and fixing factory made uPVC white colour casement/casement cum fixedglazedwindowscomprisingofuPVCmulti-chamberedframe,sashand mullion(whereeverrequired)extrudedprofilesduly reinforcedwith1.60+/- 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension,EPDMgasket,stainlesssteel(SS304grade)friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mmsizeforfixingframetofinishedwall,plasticpackers,plasticcapsand necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)Note: For uPVC frame, sash and mullion extruded profilesminus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm). 50 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness 51 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood 52 Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack wood 53 Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc 54 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 55 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm 56 Providing and fixing CP Brass Handle 450mm in all types of doors with the necessary fittings and arrangements all complete. 57 Providingand fixing chromium plated brass handles with necessary screws etc. complete:200 mm 58 Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality, with necessary screws etc complete as per direction of Engineer- in- charge. 59 French spirit polishing:Two or more coats on new works including a coat of wood filler 60 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece 61 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1800X2250 mm. 62 Fire Metal door. Material Specifications: Frame : GI 1.60 mm, Shutter : GI 1.20 mm, Shutter Width / Active Shutter Width : 808.00 mm, Frame Profile: 143.00 mm X 57.00 mm, Frame Profile type : Normal, Frame Rebate : Double, Door type : Single leaf door, Infill Material : Honey Comb, Vision Panel Active: 200 mmX300 mm. 8nos Ball bearing butt hinge, BB3090F, SS304, of size 100 x 75 x 3mm with screws in SSS , 1no Euro profile half cylinder 3005, 42mm Key x Blank, Silver satin finish , 2no Surface door closer TS73, size EN2/3/4, with standard arm, Silver finish, 1no Clear glass, 6mm of size 200 x 300mm, 2 nos concealed flush bolt, Mortise sash lock with lever handle on side and panic lever on other side. The door should have a minimum fire rating of 2hrs . Wall Opening Size 1000X2200 mm. 63 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately) 64 Providing and fixing SS H handle having min 45 cm length in toughed glass door including all necessary screws etc. complete. 65 Providing and fixing of glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete 66 Fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in- charge. 67 Providing and fixing 3M Fasara frosted etching film of thickness 25 microns self- adhesive of approved colour, shade, and quality with cutting as per approved design and pattern, including cleaning of glass and making surface smooth for fixing of film to the surface, all completed as per the direction of the engineer in charge. 68 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover 69 Providing and fixing ball bearing for rolling shutters. 70 Sanitary and CP Fittings 71 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 72 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid 73 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 74 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 75 Providing and fixing ceramic urinal partitions of standard size as per direction of Engineer-in Charge and of approved shade 76 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 77 Providing and fixing uplasticised PVC connectionpipe with brass unions: 30 cm length15 mm nominal bore 78 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:150 mm diameter 79 Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore 80 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board610x510 mm bowl depth 200 mm 82 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm 83 Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in- charge. 84 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 85 Flexible pipe32 mm dia 86 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with C.P. brass screws and washers complete. 87 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 88 Providing and fixing SS grating of approved quality and colour. Rectangular type with openable lid150 mm nominal size square 100 mm diameter of the inner hinged grating. 89 Providing and fixing disabled friendly bathroom kit with all accessories including wash closet with soft close seat cover and cistern with twin flush setting, wash basin of min dimensions 510mm x 400mm with all necessary fittings including Angle cock, Connection pipe, waste pipe, Spatula Lever basin mixer, Wall mounted 600mm long, Wall mounted grab bar 600 mm long and wall mounted hinged rail 750 x 750, Health Faucet with angle cock. Recommended Makes : CERA , Hindware, Jaguar or equivalent . 90 Plumbing 91 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall32 mm nominal outer dia pipes 92 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall40 mm nominal outer dia pipes 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge.Internal work - Exposed on wall50 mm nominal outer dia pipes 94 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes 95 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes 96 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore 97 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore 98 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore 99 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore 100 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall 101 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall 102 Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall 103 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow 104 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes including jointing with PVC solvent cement - 63x63x63 mm dia Tee 105 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63x50 mm dia Reducer 106 Supplying and fixing PVC Floor Trap 100mmx75mm size without Jali including cutting open, boring through RCC slabs and making good the damages. 107 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 6Kgf/cm2 108 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2 109 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall 110 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend 111 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee 112 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl 113 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia End cap 114 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow 115 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall 116 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 117 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee 118 Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl 119 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia End Cap 120 Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow 121 Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer 122 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore 123 Providing and placing on terrace (at all floor levels) polyethylene water storage tank:ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 124 Yard Plumbing 125 Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2 126 Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes,including jointing with PVC solvent cement - 110 mm dia Socket/ coupling 127 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 120x90 cm and 90 cm deep including C.I. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg):With common burnt clay F.P.S ( non modular) bricks of class designation 7.5 128 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single pushfit Coupler110 mm 129 Providing and fixing on wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansionBend 87.50110 mm bend 130 Tile and Granite work 131 Providing and laying Matt Finished vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 1200 x 600 mm. 132 Providing and laying Matt finished Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, ofapproved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 1200x600 mm 133 Providing and laying Anti Skid matt vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. 134 Providing and laying premium vitrified bathroom wall tile in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 135 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm 136 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining ( veneer work), backing filled with a grout of 12 mm thick average in cement mortar 1:3 ( 1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 ( 1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade ( To be secured to the backing by means of cramps, which shall be paid for separately).Area of slab over 0.50 sqm 137 Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shade. Area of slab over 0.50 sqm 138 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 139 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work 140 Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 141 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 142 Providing and fixing 12 mm thick gang saw cut, mat /rough finished granite, machine cut for steps, ramps or inclined plate form with raking and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 143 Structural steel 144 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 145 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 146 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 147 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 148 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 149 False ceiling 150 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board 151 Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile size 595x595 mm made of Gypsum plasterboard , manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyster on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyster film so as to make the tile a completely sealed unit. 152 Rainwater Harvesting ,Fire Tank,Septic Tank 153 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock 154 Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock 155 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 156 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 157 Providing and laying in position machine batched and machine mixed design mix M- 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to siteof laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work upto plinth level 158 Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 159 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For vertical surface two coats @0.70 kg per sqm 160 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineerin-charge. The product performance shall carry guarantee for 10 years against any leakage.For horizontal surface one coat @1.10 kg per sqm. 161 Supplying and fixing C.I with frame for manholes: 600mm x 600mm ( heavy duty) the weight of the cover and frame shall not be less than 208 kg 162 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 163 Providing and placing on terrace (at all floor levels) Stainless Steel 304as per IS 5522:1992 of capacity 5000 Litreswith suitable fixing arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 164 Providing and fixing of Fire Rated door 1200x2100mm- Hollow metal fire doors at all levels from ISO 9001-2015 certified Manufacturer. Fire door should be as per NFPA 80 and NFPA 252. All fire doors should be tested at UL for 120 minutes and should pass both UL10B and UL10C. Doors shall be made from pressed galvanized steel confirming to IS277 as per following specification.Frame:Door frame shall be single rebate grooved profile of size 125 x 55 mm made out of 1.6 mm (16 gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self-tabs. Frames to have in build grooved sealing system and shall be site fitted with fire rated EPDM gasket as standard. All provision should be mortised, drilled and tapped for receiving appropriate ANSI UL labeled hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff and the gaps shall be sealed with silicon sealant.Shutter: Door leaf shall be 46 mm thick fully flush double skin door without vision lite. Door leaf shall be manufactured from 1.2 mm (18 gauge) minimum thick galvanized steel sheet.The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI standard. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf.Door and frames shall be finished Pure Polyester Powder coated and shall have passed minimum 500 hours of salt spray test.Vision glass: The glass shall be 5mm clear fire rated glass of equal rating and not exceeding size of 114 sq. inches.Door Hardware: Stainless steel Ball bearing Hinges 3 Nos, Minimum 90Kg hydraulic surface applied rack and pinion door closers, Mortice Sash Lock with cylinder. One Side Handle and Other Side with 2 point Panic Bar. 165 Road Work 166 Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 167 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. 168 Water proofing 169 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 170 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tilling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured) 171 Landscaping 172 Supplying of Flowering Shrubs (Heliconiya st. Vincent red, Ixora bush, Cana durf etc..) 173 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removalof unsaverieable material?s as per direction of officer in charge (including cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100) 174 Providing and Laying Landscaping of outdoor area with buffalo grass and small plants with all necessary levelling and filling as required. 175 Signage 176 Providing and fixing in position the signage board made out of 3 mm opaque PVC foam board of computerised cut, PVC non reflective self adhesive vinyl painted foam board of required size and colour. 177 Providing and fixing non lit Signages made of CNC Cut Stainless Steel projected letters and fixing it at site with all necessary fitting arrangements and accessories as per the design and requirement on instructions of the engineer in charge. 178 Furniture 179 Two tiered reagent racks (MS with powder coating) with granite top of 150 mm depth for side workbenches. The two tier should be placed at a minimum spacing of 300 mm. The item should be in compliance with IS 4209 (2013), NABL etc. The Length should be customized as per lab workbench and vertical posts must be placed at appropriate spacing. 180 Supply and Installation of Sink Module with SinkEach sink module should have a minimum dimension of 900 mm (L) x 900 mm (W) x 900 mm (H) and made of MS as per IS 1730 shall be designed with a single cabinet (with 2 shutter, SS304 hinges for easy and noiseless opening and closing mechanism). This module should include a sink made of 5 mm thick polypropylene with black color body. Minimum Dimension of the sink: 450 mm (L) x 600 mm (W). Sink should include PVC tap connection-15mm diameter (Goose neck type), grating etc. The sink module shall be portable and provided with 18mm thick granite table top (with cut out for providing sink). Item to be inclusive of all necessary fitting arrangement.The item should be in compliance with IS 4209 (2013), NABL, WHO etc. 181 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 750 mm D 182 Supplying and Fixing of Lab work Table with Granite Top supported over 18mm thick marine plywood , frame work with with GI members with Heavy Duty Levelers, minimum dimension of 2000mm L x 890mm D 183 Supply, Installation, Testing and Commissioning of Eye wash with Brass inject mould with epoxy powder coated body with auto released Valve and cup shaped water dispenser with min 1/2 HP power pressure booster pump 184 Counter Height Stools :Supply and erection of counter height stools ( bar stools ) of following specifications : Revolving adjustable Chrome plated steel body chairs with resistance to the corrosion. Cushion Seat with Lift mechanism for Adjustment of height. Minimum height 750mm before expansion. Medium Back rest and arm rest. Item shall be of reputed make. 185 Office Chair: Non-revolving executive chair with fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric, Upholstery: Heavy duty rubber backed fabric in BLACK ( Size -55x60 cm) 186 Executive Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 187 Revolving Chair: Medium back ergonomic chair with five nos. star shaped Nylon base. Castor: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment , Fixed armrest providing natural resting for arms. Seat with PU coated foam backed fabric, back rest with mesh type fabric, upholstery: Heavy duty rubber backed fabric in BLACK 188 Cabinet/Wardrobe: Providing and fixing Cabinet/Wardrobe unit with 18 mm thick Multi wood board with one side decorative and other side balancing lamination. cupboard shutters edge to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with fixing chromium plated brass 50 mm cupboard or wardrobe knobs, special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Depth of shelves to be 300-600mm and shelves to be fix with proper support and bracket holders. as per layout drawing approved by Engineer in charge. Make laminate: Greenlam/ Merino / Century. Only front elevation will be measured. 189 Supply and erection of Airport type 3 seater waiting chair with powder coated chromium finish having minimum dimensions 1675mm length X 710mm width X 775mm total height and 400mm seat height . Seat: High quality cold rolled 1.2mm thick steel perforated sheet pressed and welded to form the shape. Arm & Leg: High quality 1.2mm thick MS Tube / Sheet . Cross bar: High quality cold rolled 2mm thick steel sheet pressed and welded to form the shape. 190 Table of size Min 2300x600mm Made of minimum 18mm BWR ISI (303 Grade) plywood (Century, Greenply, Fineply or equivalent). On top and all sides with 1mm thick hot press (3M or Henkel) laminates (Brand MERINO, Associates or equivalent) of approved colour and pattern as per the design. The table is provided with 1 drawer, 1 Storage, 1 key board locks, handles, mini fix, dowels and screws. Exposed edges to be finished with 0.8 mm edge band as per specified colour. 191 Supply of wooden table with one drawer and Cupboard unit made of hard wood varnishing/painting all complete. Size: 1200x600x750mm 192 Providing & supply of Conference Table with executive chair of 13 Pax with the following specifications.Table top size :3600 x 1200mm. Table Tops –made of 25mm thick MDF with waterfall top edges finished in PVC Membrane using unique wrap around technology for better aesthetics & long lasting use. Under structure – Legs made of 25 mm thick standard Black matt colour post formed panels interconnected with 18mm thick standard Black matt colour pre-laminated modesty panels, with height adjustable levelers to take care of uneven floors. Wire Management & Concealed wire management to take care of basic wiring requirements both horizontally & vertically. For closed configurations, liftable top cover, made of 12mm MDF finished in PVC Membrane, is provided to access the horizontal wire carrier. Vertical wire management is through flexible vertical wire manager, popup grommet with power & RJ45 Socket. Designed for Flexibility through modular Construction, PVC Membrane Finish Tops for seamless surface, Post formed Legs for safe use, Provision for easy wire management, Upgradeable / reconfigurable for future needs. 13 Nos Revolving adjustable type Medium height Back Office Chair with arm rest with back tilt and swivel mechanism constructed out of mild steel and high quality plastic. 193 Supply of wooded Chairs with armrest of Hard Wood Plank Seat and Reaper Back. 194 Supply of Wooden Bench and Desk made up of Mahagani of minimum size - Bench Size :1 83x30X46cm Desk Size :183x41x75 cm 195 Supply and installation of steel podium made of SS304 with min dimensions 500mm X 450 mm X 1200mm and having a sloped top surface, and having a decorative/ plain front face all made of SS 304 as per the design and approvals of the architect/ Engineer - In - Charge 196 Wiring-General Electrical work 197 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C 198 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 199 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire 200 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 201 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 202 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 6 Sq.mm + 1 x 6 sq.mm earth wire 203 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C 204 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 10 sq. mm + 1 X 6 sq. mm earth wire 205 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 16 sq. mm + 1 X 6 sq. mm earth wire 206 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 4 sq. mm + 2 X 4 sq. mm earth wire 207 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 208 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 209 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm 210 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm 211 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 32 mm 212 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair 213 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 214 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 215 Fixtures 216 Supply and Fixing suitable size modular GI box with cover in front on and providing and fixing 1 no RJ 45 including connections as required. 217 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 218 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 219 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet 220 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 221 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet 222 Supply and Installation of surface/recess mounted LED 2x2 luminaire with CRCA housing suitable with fully diffused diffuser for general lighting. The luminaire should have CRI > 80 and CCT of both 6500K/5700K, Cool White Light. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3700 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 36 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro or equivalent 223 Supply, conveyance and Installation of compact, 2 feet,10-15W,LED tube light with high lumen giving soft glare free light including all required mounting accessories, frames complete. (Philips/WIPRO/Havells or equivalent) 224 Supply, Installation of surface mounted LED Tubelight. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 105 lumen/watt and Minimum system wattage of 30 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 25k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make - Philips, Crompton, Wipro, Havells 225 Supply, Installation of surface/recess mounted LED Round/Square luminaire with CRCA housing suitable with fully diffused diffuser for general lighting in office areas. The luminaire should have CRI > 80 and CCT of both 6500K/5700K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3600 nominal lumens and efficacy of atleast 110 lumen/watt and Minimum system wattage of 10 -15 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours. The electronic driver used shall have a power factor >0.95 and THD. Make-Philips, Crompton, Wipro 226 Supply, conveyance and Installation of compact 10-15W LED Bulkhead Light giving soft glare free, Cool White light & complete with electronic driver including all required mounting accessories, frames, complete ( Make: Philips/WIPRO/Havells or equivalent) 227 Supply, Installation, Testing and Commissioning of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 228 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, ashers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: Atomberg/Havells/ Orient Electric/ Crompton or equivalent 229 Supplying, conveyance and Installation of 150-250 mm sweep,1350 rpm, 3 - 5 blade BLDC Exhaust Fan including frames and all mounting accessories complete.Recommended Make: Atomberg Efficio/Crompton Brisk Air 230 Supplying, conveyance and Installation of BLDC Type Wall Fan having 3 blade, 400 mm sweep, Speed 1350 rpm, Air Delivery 70 CMM minimum, Wall Mount Fan including frames and all mounting accessories complete. Recommended Make: Atomberg Renesa/V-Guard ENVIRO WF BLDC/Havells Platina 231 Supply, Installation, Testing and Commissioning of 450 mm sweep, 900 rpm heavy duty exhaust fan with louver in existing opening including making good the hole to suite the size of above fan complete with connections using 3 core 1.5sqmm multi core pvc sheathed copper conductor cable etc as required. 232 SITC of skirting light fitting with white LED 3 module along with suitable size modular metal box with inner and outer plates with all accessories. 233 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). 234 Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. lCD 235 Supply and installation of 2 Nos. 4 ft MS powder-coated hanging rods for tube lights, including supply and laying of 1.5 sqmm copper PVC insulated FRLS wire (3 runs: Phase, Neutral, Earth), necessary hardware (ceiling clamps, saddles, junction box, connectors), complete mounting, terminations, testing, and labour charges — complete in all respects. 236 Network and CCTV System 237 Supply of 16 ports Network Switch, Rack-mountable 10/100/1000 Mbps, Switching capacity 35.7 Mbps Features: Flow control, Layer 2 switching, auto-negotiation, auto- uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, Quality of Service (QoS) Power: AC 120/230 V (50/60 Hz) complete. Make D-Link/TP Link/Cisco or equivalent 238 Supply Installation Testing and Commissioning of 32 channel embedded Linux NVR (Network Video Recorder), must connect 32 channel IP cameras, Should support min 2 SATA HDD and each should support Min 2TB and must record video simultaneously, (Recording Type: Continuous, Motion Detection, Alarm, Smart Event, Event Motion Detection, Alarm, Smart Event), Video Compression H.265(HEVC)/H.264+/H.264, 2 Year Warranty, Image quality should be maintained throughout the warranty period. Make: CP Plus/Hikivision/Dahua or equivalent 239 Network Switch for CCTV. 16 Port PoE Switch 1000BASE-T Copper Ethernet PoE+ connections, 10M/100M/1G RJ-45 copper ports, 1000BASE-X Fiber SFP ports, 16 port Auto sensing 10/100/1000 Mbps PoE, minimum CPU memory 512 MB with 2 SFP/combo ports, Energy Efficient Ethernet (IEEE 802.3az) Make: CP Plus/Netgear or equivalent 240 Supply, Conveyance and Installing of 2MP IP Dome/Bullet Camera having Progressive Scan True Day and Night Colour IR Camera having effective pixel of 2 MP, Video frame rate of 2MP @30FPS, Minimum illumination of 0.01 [email protected], 0 lux@IR On, 20 M IR Range, 24 IR LED, AWB, AGC, BLC, 2D Noise reduction, with 3.6mm board lense, 12 VDC, PoE IP67 rated weatherproof performance. 1 year warranty. Make: Bosch/CP Plus/Honeywell or equivalent 241 Supply and fixing of 6U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete 242 Supply Installation Testing & Commissioning of 16 Port Loaded Cat 6 - U/UTP Modular Toolless Patch Panel having a metal structure enabling them to be durably fixed to the uprights of the 19 chassis. Include rear cable manager to hold cables without need for cable ties. The termination of I/0s shall be without any manual crimping tools. 243 Supply and fixing of 4U wall mounting rack with supply and fixing of mounting brackets for support Lockable Front Door and Detachable Side Doors, Cable Manager and PDU of 4 or 6 sockets including cooling fan with accessories complete. 244 Supply and connecting 2 meter long CAT6 cable Patch cord having RJ45 connectors crimped at both ends, to the existing outlets as required. Make: D-Link/TP-Link or equivalent 245 Supply and Installation of LED Color display of minimum 32 inch screen, complete, UHD display Make: LG/Samsung/Panasonic or equivalent. 246 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable 247 Supply, Installation and Integration of Dual Band WiFi Access Point on false ceiling along with accessories, having Fast Wireless Speed, simultaneous 2.4GHz 300Mbps and 5GHz, 867Mbps Dual Band connections for 1.2Gbps of total available bandwidth, Superior Coverage of Four Fixed External antennas provide stable wireless connections and optimal coverage, App Control, Interface of 1× 10/100 Mbps WAN Port and 4× 10/100 Mbps LAN Ports having Working Modes (Router Mode / Access Point Mode). Make: TP-Link/Netgear/DLink or equivalent 248 UPS 249 Supply, Installation, Testing and Commissioning of True on-line Double Conversion 10 KVA UPS system with 3:3 Crest Factor Three Phase Input Three Phase Output. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : a) Phase – Three Phase with ground b)Voltage range 190 VAC – 470 VAC c)Input Frequency :50/60 Hz d)Power Factor : 0.95 or above e)THD : less than 5% with full load Bypass f) Voltage Range – 200VAC – 240 VAC ) Frequency range – 45-55 Hz/55-65 Hz Output Voltage Range h)Voltage Range – 200VAC – 240 VAC i)Frequency range – 50/60 Hz j)Voltage distortion – linear load <= 2% k)Voltage distortion – nonlinear load <= 5% l)Output waveform – pure sinewave m) Crest Factor – 3:1 Minimum Back up time : Continuous 30 Minutes at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type: Sealed Lead Acid Maintenance Free DC Voltage : 96V DC System, Battery Nos and capacity shall be designed for optimum storage space. Installation &Commissioning Required Breakers also needs to be provided in input and output side for the UPS. Make: Liebert Vertiv/APC by Schneider/Numeric by Legrand 250 Cable Trays 251 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.375 mm width X 50 mm depth X 2.0 mm thickness 252 Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness 253 Fan Clamp 254 Providing and fixing 16 mm S.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. 255 DB and Switchgear 256 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) 257 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 258 Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) 259 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator6 way, Double door 260 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 261 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural 262 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole 263 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 264 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 265 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 266 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 267 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 268 Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32amps 415 volts C curve TP MCB complete with connections, testing and commissioning etc. as required. 269 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole 270 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole and neutral 271 Earthing and Lightning Arrestor 272 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re- filling etc. as required. 273 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 274 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. 275 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 276 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 277 Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) 278 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. 279 Laying copper/ G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. 280 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube,having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 281 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. 282 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) 283 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) 284 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.75 mm copper conductor (6 SWG) 285 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.00 mm (8 SWG) 286 Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.4.75 mm (6 SWG) 287 Street Lights 288 Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 289 Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 290 Water Purifier 291 Supply and Installation of Water Purifier having Multi-Stage Filtration: RO (Reverse Osmosis), UV (Ultraviolet), UF (Ultrafiltration), Storage Capacity: 7-9 Liters, Purification Features: RO: Removes dissolved impurities, heavy metals, and salts.UV: Kills bacteria, viruses, and other microorganisms. UF: Filters out fine particles and microorganisms. Mineral Booster: Adds essential minerals to enhance water taste.TDS Controller: Adjusts Total Dissolved Solids for taste preference. ActiveCopper: Infuses copper ions into the water for added health benefits.Aqua Taste Booster: Enhances the taste and maintains optimum pH level. In-Tank UV Disinfection: Keeps stored water pure.Smart Display/Indicators: Alerts for filter change, UV fail, water level, and service needs. Super Fine Sediment Filter: Removes fine and coarse particulate impurities. Water Level Indicator: Monitors the purified water level in the storage tank. Make: Aquaguard Aura 7L/ Bluestar Aristo 7L/Kent Grand Plus ZWW 9-Litre/ LG 8L 292 LT Cabling and Termination 293 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 294 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 295 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp 296 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 297 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp 298 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 240 sq mm 299 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 240 sq. mm (62mm) 300 Supply & laying of one No. PVC insulated and PVC sheathed armoured aluminium power cable of 1.1 KV grade of the following sizes in the existing masonry open duct as required.3.5 core 400 sq mm 301 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 400 sq. mm (82mm) 302 LT Panels 303 Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work. General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall befl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 400A 3kA 4 Pole MCCB - 1no Ics = 100% Icu rating Digital Voltmeter 0- 500V with selector switch & Digital ammeter (0-400A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 400A. Out going : 250A ,50kA 4 Pole MCCB - 2no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 304 Lift panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 40A ,16-25kA TP MCB - 6 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list.Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 305 Sub Panel- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required. Incomer : 1) 63A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch &Digital ammeter (0-63A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 63A. Out going : 1) 32A ,16-25kA 4 Pole MCCB - 4 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 306 SSB2- Fabrication, Supply, Installation, Testing & Commissioning of floor mounted, cubical type, dust & vermin proof, powder coated of approved shade Electrical panel fabricated out of sheet steel not less than 2.0 mm thick. Wherever necessary, such sheet steel members shall be stiffened by angle iron frame work.General construction shall employ the principle of compartmentalization and segregation for each circuit. Unless otherwise approved, incomer and bus section panels or sections shall be separate and independent and shall not be mixed with sections required for feeders. Each section of the rear accessible type panel shall have hinged access doors at the rear. Overall height of the panel shall not exceed 2.4 meters. Operating levers, handle etc. of highest unit shall not be higher than 1.7 meters. Multi-tier mounting of feeder is permissible. The general arrangement for multi-tier construction shall be such that the horizontal tiers formed present a pleasing and aesthetic look. Cable entries for various feeders shall be either from top or bottom. Through cable alleys located in between two circuit sections, either in the rear or in the front of the panel. All cable terminations shall be through gland plates. There shall be separate gland plate for each cable entry so that there will not be dislocation of already wired circuits when new feeders are added. Cable entry plates shall therefore be sectionalized. The construction shall include necessary cable supports for clamping the cable in the cable alley or rear cable chamber. The bus bars shall be of aluminium of high conductivity electrolytic quality and of adequate section. All bus bars and connections shall be suitably sleeved / insulated in approved manner. All voltmeters and ammeters shall be fl ush mounted of size minimum 96 mm conforming to class 1.5 of IS 1248 for accuracy. All voltmeters shall be protected with MCB. On all the incomers of M.V panels, ON/OFF indicating LED lamps shall be provided and shall be suitable for operation on AC supply. Phase indicating LED lamps shall be associated with necessary ON/OFF toggle switch. All small wiring for Controls, Indication etc. shall be with suitable FRLS/ HFFR (halogen free fire retardant) copper conductor cables. Identification ferrules shall be used at both ends of the wires. The panel shall comprise of incomers, outgoing feeders and bus coupler as specified. The entire switch panel shall be cubical type generally conforming to IS 8623:1993 for factory assembled switch board. All incoming AIR CIRCUIT BREAKER/ MCCB shall have suitable adjustable tripping current and the time delay settings. The entire panel shall have a common earth bar of size as specified with two terminals for earth connections. The panel shall be suitable for operation on 415V, 3 phase, 50 Hz AC supply with enclosure protection class IP-42 as required.Incomer : 1) 250A 36kA 4 Pole MCCB - 1no Ics = 100% Icu rating, THERMAL MANGNETIC RELEASEDigital Voltmeter 0-500V with selector switch & Digital ammeter (0-250A) with selector switch and CTs etc. LED type RYB phase indication lamps, ON, OFF, Trip indication lamps, set of aluminium bus bar 250A. Out going : 1) 63A ,16-25kA 4 Pole MCCB - 8 no Ics = 100% Icu, (with Hylam sheet & warning signages as required) Switch gear make should as per approved make list. Panel shall meet all necessary specifications as per local electrical body/Inspectorate norms. 307 Transformer 308 Supply , Installation, Testing and commissioning of 500 kVA outdoor unitized substation with an 11kV/433V dry-type cast resin transformer and a 630A VCB typically includes a compact prefabricated design conforming to IEC62271-202 standards, offering IP53/IP23 protection, and featuring compartmentalized construction to prevent accidental entry into energized areas. The substation is designed to withstand electrical impulses, thermal, and dynamic stresses, ensuring reliable and robust performance with low power loss and noise levels. The installation involves placing the substation on a prepared concrete plinth, connecting high-tension (HT) and low-tension (LT) cables, and ensuring proper earthing and safety measures. The commissioning process includes testing the transformer, switchgear, and protection systems to verify operational integrity. Make: Unipower/Intrans/Voltamp 309 MSB and APFC Panel 310 Supplying, installation, testing & commissioning of cubical type MAIN SWITCH BOARD suitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface area 6 sq.mtr (Approx.) fabricated in compartmentalized design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 630 Amp capacity extensible type TPN aluminium alloy bus bars of height conductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., bottom base channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :- Interlocking:Electrical through advance contacts in MCCB/ ACB’s (incomers & bus couplers) and mechanical (castel key) interlocking should be provided to ensure that only one supply is available at a time on each section of bus and to eliminate any possibility of accidentally approaching two supplies at one bus section.Interlocking b(I) Incoming : 2 Nos 800 Amps (DG and MAINS) each four pole ACB of fault breaking capacity 50 KA (Ics=Icu upto 433 V manually operated, fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicators and frame earthing contact, conforming to IS 1397- 2 : 1993 as amended up-to-date complete with following accessories for each MCCB(a) Independent manual spring closing mechanism- 1 No.(b) Microprocessor release (EMI & EMC certified) for over current, earth fault & short circuit protection- 1 set.(c) Digital* type Voltmeter (0-500 V), with selector switch & back up HRC fuses/MCBs-1 set. (d) Digital* type Ammeter (0-.600 Amp), with selector switch and one set of 3 nos. CT’s of ratio. 800/5A Class I accuracy and 15 VA burden- 1set. (Ratio to be fi lled up).(e) 3 Nos. Phase indication LED lamps with 2 Amp back up HRC fuse, breaker ‘ON’ indicating light with 2 A HRC fuse, test terminal block set, fuses, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required.(f) Shunt trip coil 220 V A.C. (II) Bus Bars :TPN aluminium bus bars of minimum of 800 Amps capacity with heat shrinkable coloured sleeves and i/c DMC/SMC bus bar cross section, size supports & their spacing etc. for withstanding fault level of 31 MVA for 1 Sec (II) Outgoing :(1) (a) 4 Nos. 250 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 250/5 Amps Nos. (c) Digital* type ammeter (0- 400 Ap) with selector switch set. (2) (a) 1 Nos. 200 Amp4 Pole MCCB for (Ics = 35 kA upto 433 V) (b) CT’s of ratio 200/5 Amps set (c) Digital* type ammeter (0- 250 Amp) with selector switch set. (3) 3 Nos 160 Amp 4 Pole MCCB (Ics = 35 kA upto 433 V) (b) CT’s of ratio 160/5 Amps set (c) Digital* type ammeter (0- 200 Amp) with selector switch set. The switchgears/measuring instruments shall be as per the Choice of the Engineer in charge. The panel shall be mounted on required structural steel supports and frames for mounting, the price quoted shall be inclusive of the same. The panel shall have suitable provision for connecting to the incoming cables of 3R x 400 sqmm XLPE Aluminium cables and shall be provided with necessary earth leakage relays as per the Inspectorate Norms. The panel shall be as per the IS standards and shall conform to all norms of EB/Inspectorate/CEA. Make of Switchgear : ABB/L & T/Schneider Electric/Siemens/Legrand 311 Design, Manufacture, Supply, Installation, Testing and Commissioning of Automatic Power correction Panel having Incomer: 250A, TPN MCCB, Digital Multifunction meter for V,A,F,PF With CTs CL:1 with RYB Indication lamps-1 Set 250A Aluminium bus bar with heat shrinkable insulation sleeves-1 set, Intelligent power factor controller with control MCBs etc. complete The panel shall comprise of suitable combination of capacitor banks upto a total of 100 kVAR and shall be designed as per the standards of Electrical Inspectorate/CEA. 312 DG and AMF Panel 313 Supply, Installing, Testing and Commissioning of & Silent Type& Diesel Generating set having CPCB IV+ acoustic enclosure having Prime Power Rating of 500 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: Diesel engine radiator cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Engine mounted Instrument Panel fitted with and having digital display and necessary indication coupled to Synchronous alternator rated at 500 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor. Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Daily service fuel tank of 440-460 litres capacity fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. Dry exhaust manifold with hospital exhaust silencer and catalytic convertor. 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (lead acid type) as required as per specifications. Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. 314 Design, Fabricating, Supply, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 500 KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following: (a) 1 Nos. 630 Amp., 50 kA (Ics=100%Icu), 4 pole, current limiting type MCCB with microprocessor based release with overload setting of 50-100% having adjustable OL & SC. Set at 350A (b) Auto/Manual/Test/Off selector switch (c) 2 Nos. over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay. (d) 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering(e) Energy analyser unit to indicate current voltage frequency power factor and KWH(f) Indicating lamps for load on mains and load on set(g) Fuse for instruments(h) Battery charger, complete with transformer/ rectifi er, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment.(i) Main supply failure monitor(j) Supply failure timer(k) Restoration timer(l) Control unit with three impulse automatic engine start/stop and failure to start lockout.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator(o) Audio/Video annunciation for(i) High water temperature(ii) Low lubricating oil pressure(iii) Engine over speed(iv) Engine fails to start(v) Full load/maximum load warning. AMF Panel shall be connected to Main Switch Board incomer with necessary interlocking arrangement to prevent simultaneous switching on of power supplies. All integration between Main Switchboard and AMF Panel is under contractor scope. 315 HT Cable 316 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3 core 300 sq mm 317 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:300 sq. mm 318 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :300 sq. mm 319 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.Above 120 sq. mm and upto 400 sq. mm 320 Air Conditioning Works 321 Supply, Installation, testing and commissioning of 3 x 3 Cassette type Air Conditioner of following capacity and specifications: Consisting of ceiling-mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of energy-efficient suitable rotary compressor for operation on single-phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation, with R-32/R-410A or equivalent refrigerant and fixing of room (fan coil) unit on ceiling, standard 5 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room & condenser as per site conditions, comprising of 1 dia drain PVC pipe with insulation up to 5 m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigerant gas, suitable stabilizer etc complete as required. (Make: Voltas, Blue Star, Daikin, Hitachi, Carrier or equivalent). Minimum 2 TR 3 Star rated (inverter type AC) as per BEE 322 Supplying additional copper piping of required size and connecting the same to the available piping and extension of the same through 100mm PVC duct inside false ceiling. 323 Electrical Dismantling Works 324 Dismantling of existing outdoor transformer and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 325 Dismantling of existing DG set 100 kVA, AMF panel etc and handing over to client as required by stacking the same within the campus premises, including accessories complete as per direction of engineer-in-charge 326 Electrical Works- Fire 327 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm 328 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 6 sq mm with factory made clamp 329 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 330 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 35 sq mm with factory made clamp 331 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm) 332 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) 333 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm) 334 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 335 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 336 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 337 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 338 First Aid Hose reel &Wet Riser system 339 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.a.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585b.20 mm nominal internal dia gun metal globe valve & nozzle. c.Drum and brackets for fixing the equipmets on wall.d.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.30 m 340 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 341 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :2 way-100 mm dia M.S. Pipe 342 Supply and fixing of Air release valve SS body of 25 mm dia (UL Listed). 343 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 344 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 345 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel (Grade 304) 346 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :Stainless Steel (Grade 304) 347 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel 348 Hose Box - Supply, Installation, Testing and Commissioning of Hose Box -Double door - (cabinet) to accommodate Two pieces of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pipe. The cabinet is made of MS sheet, painted in approved red colour with glass fronted hinged doors and lock &key (UL Listed). 349 Supply and Installation of Fire Brigade Draw-out Collecting head of CI Body having gunmetal 63mm dia instantaneous male draw out confirming to IS:903 suitable to fit on 100mm dia pipe with necessary flanges, rubber gasket, nut & bolts and other items. 350 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 351 Fire extinguishers 352 Supply &installation of ISI ABC type fire extinguisher of 4 kgs. Make SAFEX/ MINIMAX / CEASEFIRE or equivalent(UL Listed) 353 Supply &installation of CO2 type fire extinguisher of 4.5 kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 354 Supply & installation of water mist type fire extinguisher of 9 liters. Make SAFEX / MINIMAX / CEASEFIRE or equivalent 355 Supplying & Installing of Clean agent based automatic modular fire extinguisher (ceiling mounted) suitable for A,B,C class fires & electrical fires, Capacity- 5Kg 356 Supplying & Installing of Mechanical Foam (Stored Pressure) Type fire extinguisher of 9L capacity with mounting clamp. ISI approved. Make : SAFEX/MINIMAX/CEASEFIRE or equivalent 357 Fire Pumps & Fire Panel 358 Electric driven Main Fire Pump: Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.1620 lpm at 56 m Head 359 Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump)Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required.Suitable cement concrete foundation duly plastered and with anti vibration pads. 1620 lpm at 56 m Head 360 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump)a.Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520.b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325.c. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. As required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head 361 Fabrication, supply, Installation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)Main Fire Pump125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.Jockey Pump63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.DIESEL ENGINE CONTROLControl for diesel engine comprising - Automatic/Manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitable for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller.Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification 362 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 150mm 363 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 80mm 364 Supply and Installation of 12V DC, 200Ah maintenace free battery suitable for Diesel Engine driven fire pump operation with required connect cable set, battery stand. 365 Supplying & Installation of suitable flexible coupling/connection to fix at the suction and deliverys side of the fire pumps.dia 100mm 366 Signages 367 Supply and fixing in position Exit Signages photo luminescent type with indication arrows and letters Exit/Fire Exit/ Staircase/FIRE/Fire Station/Fire Fighting Equipment/Fire Duct/ Fire Extinguisher/ Floor/Fire Command Centre/Fire Pump Room/ No Smoking / Danger/ Call point / Sounder Identification Numbers (Ground/ 1st/2nd)/ In case of the fire do not use lift, use stairs and other mandatory signages recommended by Fire Departments having dimension 30 cm x 15 cm complete inculding fixing mechanism. 368 Supplying and Installing in position the signages approved by Kerala state fire service - of minimum size 1ft x 1.5ft made out of PVC rigid sheet 3mm thick with computer cut PVC non- reflective self adhesive imported vinyl painted on the front of PVC rigid sheet complete with wall mounting arrangements with mirror screws. with lettering- ASSEMBLY AREA 369 Signboards: Supply and Installation of Fire Escape Plan with fire fighting equipment location, exit in A3 Foam sheet with plastic lamination with necessory accessories to fix it on wall. 370 Supply and fixing in position & Fire Order& signage in suitable size made of high quality PVC foam sheet with photo luminescent lamination to make it glow automatically in the dark, with suitable arrangement to fix it on wall. 371 Supplying & fixing in position Assembly Point sigange in suitable size on aluminium composite panel with suitable stand to fix it on open area outside building. Assembly Point 372 Terrace pump 373 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)a.Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-F insulation, conforming to IS-325.c. M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.d. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head 374 Design, Supply, Installation, Testing, and Commissioning of an Automatic Terrace Fire Pump Panel, including:- IP54-rated enclosure with powder-coated CRCA sheet steel.- 32A 16kA MCCB, 15 HP-rated pump 3P contactor, overload relay, and pressure switch for automatic pump operation.- Auto/Manual selector switch, START/STOP push buttons, hooter, timer, and protection features (dry-run, phase failure, etc.).- Indicators (Power ON, Pump Running, Fault, Low Pressure), meters (Voltmeter, Ammeter with selector switches).- Copper wiring, termination, and provision for cable glands.- Installation, onsite calibration, and full functional testing for pressure-based automation. 375 Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 376 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 377 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 378 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 379 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.100mm dia 380 Pressure Guage-Supply, Installation, Testing and Commissioning of pressure guage, 4 & dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 381 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations (UL Listed).20 mm dia Make : Kartar/ Atom 382 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required4.00 mm copper conductor ( 8 SWG) 383 Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.10 sq mm 384 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 385 Above Ground Piping 386 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :100 mm dia 387 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :25 mm dia 388 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :80 mm dia 389 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :250 mm dia (wall thickness 6.3 mm) 390 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :150 mm dia 391 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :200 mm dia (wall thickness 6.3 mm) 392 Supply and Installation of 80mm dia M.S. &C& Class Diesel Engine exhaust pipe duly insulated with 50mm thick Glass wool with 1mm thick aluminium sheet cladding with bellows, flexible joint, necessary support, making hole in brick wall for pipe installation.Pipe dia 80mm 393 Underground piping 394 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 150 mm. Make - TATA / JINDAL 395 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (75 cm below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 200 mm. Make - TATA / JINDAL 396 Supply, Installation, Testing and Commissioning of MS C class ERW pipes with ISI Mark complete including cutting and jointing as per the requirements of standards, welding using high quality welding electrodes for pipe. supporting the pipes using Channels or Angles or structures at required intervals as specified for fire fighting work. Piping shall have one coat of anticorrossive zinc chromate industrial primer and two coats of IS approved colour code. All pipes are with ISI mark (IS 1239/3589)Pipes of required dimensions (length and dia) need to fabricated by the vendor by cutting/welding pipes of standard dimensions. length of each type( pipe diameter) should be fixed by the vendor after visiting the site and factory building. The pipe shall be laid direct in ground (1m below ground level) including excavation and refilling the trench and covering with 3 mm tar sheet. Pipe size 100 mm. Make - TATA / JINDAL 397 Valves, measuring devices & switches 398 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:200mm dia 399 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required80 mm dia 400 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required100 mm dia 401 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required150 mm dia 402 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :80mm dia 403 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :150mm dia 404 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.150mm dia 405 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 406 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required 407 Pressure Gauge-Supply, Installation, Testing and Commissioning of pressure gauge, 4 dial, 0 - 200 psi range 3/8 BSP weather proof with stainless steel internals, siphon tube including fittings etc (UL Listed). Make: H Guru/Pointer 408 Supply and fixing of Air release valve Brass body of 25 mm dia (UL Listed) following IS standards, with required pressure rated. 409 Supply, installation, Testing and Commissioning of Lever operated Ball valves made of Cast iron conforms to IS 5312, at required locations.25 mm dia Make : Kartar/ Atom 410 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :100mm dia 411 MOEFA system, Automatic Detection & Fire Alarm System 412 Supplying, installing, testing and commissioning approved make Microprocessor based Multi-loop, Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 trouble events including1000 alarm log history events, Self Programmable alphanumeric keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop and shall be extendable upto 10 Loops. Each loop shall have a capacity of minimum 125 detectors & 125 other devices exculding 20% spare. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition with the charging capacity of 200AH. The panel shall be capable of self programing without any dependancy on dongle or programming software. Quoted rate shall include supply of necessary software & hardware for progamming the panel with all necessary licence. Panel shall have Modbus over IP protocol for future integration with BMS. However, for present arrangement FA system will be standalone with 24x7 monitoring. The panel shall be capable of connecting to the cloud platform/solution. Complied to meet UL864, 10th Edition 6 Loop Networkable Addressable Fire Alarm Control Panel(Make: Honeywell or Equivalent) 413 Supplying, installation, testing & commissioning of addressable fire control module complete as required. 414 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 415 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 416 Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. 417 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 418 Supplying, Installation, testing & commissioning of external power supply unit provides regulated and filtered 24 VDC power for hooter operation.Battery backup with built in charging. 419 CABLING & WIRING Supplying & laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. 420 Miscellaneous 421 Preparation of initial and final drawings, submission to Panchayath, Municipality, KSEB, Electrical Inspectorate, Kerala Water Authority, State Pollution Control board, Fire Department, Factories and Boilers and other agencies if any for getting approval, sanction and No Objection Certificate for building permit and completion from Fire Department and other department. Quoted rate shall be excluding statutory fee (All statutory fees shall be borne by Client-actual statutory fees shall be reimbursed on submission of original bill/challans from authorities).
Contract Date: Jul 17, 2025 Contract Value : 11.48 Crore
Boards / Undertakings / PSU No of Bidders 1
44.
Agriculture #10366973 Price Bid
tender for Construction Of Biotech Lab And Boundary Wall At A.N.D.University Kumarganj, In District Ayodhya Construction Of Biotech Lab And Boundary Wall At A.N.D.University Kumarganj In District Ayodhya, Construction of Tissue Cultural Lab at Acharya Narendra Dev Agriculture and Technology University, Kumarganj, Ayodhya, Construction of internal sewerage system, Construction of external pipeline, Construction of septum and soakpit, Construction of boundary wall (225 m), construction of barbed chain link fencing, Construction of 01 gate, Construction of C.C. and interlocking, Construction of guard room, Construction of generator room, Soil filling work, Construction of polycarbonate high-tech green house, Construction of 02 poly houses and Construction of 02 net houses., 1 Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. 2 Excavating, supplying and filling of local earth (including royalty) bymechanical transport upto a lead of 5km also including ramming andwatering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete 3 Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors. 4 Construction of apron drain along apron (150X150)MM 5 Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work. 6 (4) Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturers standard dilution) 7 Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Upto plinth level R.C.C. work in Footing 8 (iii) R.C.C. work in Columns footing 9 (ii) R.C.C. work in Beam 10 Above plinth to floor-V lvl Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Upto plinth level R.C.C. work in Columan 11 (i) R.C.C. work in Lintel 12 (ii) R.C.C. work in Beam 13 (iv) R.C.C. work in Slab 14 M-150 brick work in 1:6 (one cement and six coarse sand sand of 2.25 fineness modulus) mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. 15 Providing and laying damp-proof course 25 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). 16 Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 17 M-150 brick work in 1:6in super-structure above plinth level up to floor two level ( up to two storeys ) includingnecessarycutting and moulding of brick work asrequiredand also including honeycombed brick work in thickness of wall more than 12cms. (1:6 cement : coarse sand) 18 M-150 brick work in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 19 P/F Fe-500 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 20 15mm thick plaster with cement mortar in proportion of 1:4 cement & coarse sand of 2.25 F.M. 21 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 coarse sand 22 12mm thick plaster in 1:3 on ceiling and soffitsof stairs upto floor two level. 23 Making grooves 10 to 12 X 12mm and upto 25 X 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required. 24 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, Cherry/Ruby red 25 Providing and laying 6 to 8 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size with all colours and shades, laid on 20mm thick cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 26 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 25 mm thick 27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 28 Supply and fixing 6 mm China white glazedtiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and tool sand plants etc. required for proper completion of the work. (Size of tiles upto 300x300mm). 29 Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor). 30 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) with glazing 31 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick Single leaf 32 35 mm thick Doubleleaf 33 Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick 34 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.Fabrication of holdfast for door, chaukhats and windows. 35 Providing & fixing of door / windows grill./Chaukhat 36 Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles dulyreinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardwares and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge. (Single / double glass panes,wire mesh and silicon sealent shall be paid separately). Variation inprofile dimension in higher side shall be accepted but no extra paymenton this account shall be made. Three track three panels sliding window with fly proof SSwire mesh (Two nos. glazed & one no. wire mesh panels)made of (small series) frame 92 x 44 mm & sash 32 x 60mm both having wall thickness of 1.9 ± 0.2 mm and singleglazing bead of appropriate dimension (Area of window upto1.75 sqm). 37 Steel Painting:Applying priming coat:(a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/steel works.(b) Painting withsynthetic enamel paint of approvedbrandand manufactureto give an even shade:Two or more coats on new work. 38 Finishing walls with Acrylic smooth exterior paint of required shade: - New work (Two or more coat applied @ 1.67 Ltr./10 Sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 Sqm. 39 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade . Two or more coats on new work (For Internal ceiling surface) 40 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 41 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brickbats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5(1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm heightincluding rounding of junctions of walls and slabs c) After two days ofproper curing applying a second coat of cement slurry using 2.75 kg/ sqmof cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarsesand) admixed with water proofing compound conforming to IS : 2645and approved by Engineer-in-charge including laying glass fibre cloth ofapproved quality in top layer of plaster and finally finishing the surface withtrowel with neat cement slurry and making pattern of 300x300 mm square3 mm deep. e) The whole terrace so finished shall be flooded with water fora minimum period of two weeks for curing and for final test. All above 42 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes 43 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 44 Providing and fixing Stainless steelsliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. complete. (a) 250mm x 16mm. 45 Providing and fixing Stainless steel tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 300 x 10mm 46 200 x 10mm 47 Providing and fixing Stainless steelhandles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete (a) 125 mm. 48 Providing and fixing 150 mm bright finished floor stainless steel door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. 49 80 PUFF PANNEL(80 MM THICK WALL PUFF PANEEL-80 MM THICK WITH 0.4 MM & 0.4 MM COLOUR COATED SHEET,SHEET MAKE TATA STEEL/JSW) 50 Steel work inbuilt uptublartrusses includingcutting, hoisting, fixingin position andapplying a priming coat of approvedsteelprimer,elded and bolted including specialshappedwashersetc. complete: Electric resistance or induction butt welded tubes. 51 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 52 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 53 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain boardconforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks) 54 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white plastic seat and lid 55 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. 56 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm 57 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 40mm dia 58 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 59 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brassincluding painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern 60 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade 61 Providing and fixinghealth fossitof approve brand as directed by engineer-in-charge. 15mm nominal bore 62 Providing and fixing CP Brass 32 mm sizeBottal Trap of approved quality & make and as per thedirection of Enginer-in-charge. 63 Providing and fixing Toilet paper holder C.P. brass 64 Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms. 65 Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms. 66 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter 67 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.Coupler 110 mm 68 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.110 mm Bend Bend 87.5 degree 69 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.Shoe (Plain) 110 mm shoe 70 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. 71 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm 72 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 73 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32mm dia nominal pipe 74 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25mm dia nominal outer dia pipes 75 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. 15mm dia nominal outer dia pipes 76 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. 20mm dia nominal outer dia pipes 77 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. 25mm dia nominal outer dia pipes 78 Providing & fixing CP brass bib cock of approved quality conforming to IS 893115mm nominal bore 79 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore 80 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore 81 Providing & fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 82 Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore 83 Providing and fixing gun metal gate valve with wheel of approved quality. 20mm dia nominal bore 84 Providing and fixing gun metal gate valve with wheel of approved quality. 32mm dia nominal bore 85 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore 86 Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 87 Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia. 88 Providing, laying and fixing pvc pipe as per engineer in charge 160mm diameter 89 Providing, laying and fixing pvc pipe as per engineer in charge 100mm diameter 90 Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 100mm diameterS.W. Pipe 91 Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design: 150 x 100 mm. size P type With Sewer bricks conforming to IS : 4885 92 Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard designInside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75For Sewer Line 93 Extra for depth of man hole size 90x80 cm 94 Providing, laying and fixing pvc pipe as per engineer in charge 75 mm dia pipe 95 Providing, laying and fixing pvc pipe as per engineer in charge 110 mm dia pipe 96 Providing and fixinghealth fossitof approve brand as directed by engineer-in-charge. 97 Providing and laying in position cement concrete of specified grade excluding the ccost of centering and shuttering -All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). 98 Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. In all kind of soil upto 1.5m to 3.0m. depth 99 Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. In all kind of soil upto 3.0m to 4.5m. depth 100 Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. In all kind of soil upto 4.5m to 6.0m. Depth 101 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) 102 Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars. 103 Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter 104 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. Drilling of 300mm dia bore hole manually. 105 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia 106 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 107 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 108 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge. 109 Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter 110 Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameterS.W. Pipe 111 Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix(1 cement :4coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design.a) Inside size 60x60 cm & 60 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg. 112 Provding and fixing gun metal non return valve of approved quality (screwed end) 65 mm nominal bore Vertical 113 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.External work. 32mm nominal pipe 114 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.External work. 50mm nominal pipe 115 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.External work. 65mm nominal pipe 116 Providing & fixing sand of grading zone V or coaser grade alround the cpvc. Pipes in external work.32 mm diameter pipe 117 Providing & fixing sand of grading zone V or coaser grade alround the cpvc. Pipes in external work. 50 mm diameter pipe 118 Providing & fixing sand of grading zone V or coaser grade alround the cpvc. Pipes in external work. 64 mm diameter pipe 119 Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 32 mm nominal bore 120 Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 50 mm nominal bore 121 Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc. 65 mm nominal bore 122 Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : M-150 brick 123 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm dia nominal bore 124 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm dia nominal bore 125 Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:4:8 (1 cement : 4 Brick ballast :84 gradded stone aggregae 20 mm nominal size) 126 Providing and fixing C.I. tee at the inlet and outlet of septic tank. 127 Providing & fixing 75mm dia vent pipes. 128 Providing & fixing of 75mm dia cast iron terminal guard. 129 Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.L.D. -2.5- Circular shape 450mm internal diameter 130 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. 131 Finishing walls with water proofing cement paint of approved make and quality on new work with two coats to give and even shade including supply of all materials,labour & T&P etc. required for proper completion of the work. 132 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 133 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia 4 mm 134 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). but for thelighterbeams i.e. having spans upto 6 m. (Using m-20 Mix concrete) 135 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 136 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 137 Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick 138 Distempering with oil bound washable distemper of approved brandNew work (two or more coats) over and including water thinnable priming coat with cement primer 139 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (M.S. works). 140 Providing & fixing stainless steel sliding door bolts ISI markedcomplete. (a) 300mm x 16mm. 141 Providing & fixing stainless steel tower bolts ISI markedcomplete.(a) 250 mm x 10mm 142 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm 143 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 144 Providing, laying, spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, handpacking, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, crushible screening to fill up the interstices of coarse aggregate, watering and compacting, to the required density Grading - 2 as per technical specification clause 405. 145 Providing, laying, spreading and compacting stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, handpacking, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, crushible screening to fill up the interstices of coarse aggregate, watering and compacting, to the required density Grading - 3 as per technical specification clause 405. 146 R.C.C.workwithcementapprovedcoarsesandand20mm. guageapprovedstoneballastintheproportionof1:1.5:3(M- 20) in slab excluding supply of reinforcement and its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc.and also includingsupplyofallmaterials,labourandtoolsandplants etc, required for proper completion of the works. Binding wire cost being inluded in the item. M-20 147 Interlocking Tiles-Rubbermouldedrefiective Zig-Zag 80mm Providing and laying of Interlocking Concrete Block Laying ofPavements having thickness 80mm including levelling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc for proper completion of the work as per drawing and technical specification clause 1504 148 Providing and laying in position bitumen hot sealing compoundfor expansion joints etc. 149 Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS:7231, Parryware/Hindware/Seabird/Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests 150 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 151 Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 152 Providing and fixing unplasticised PVC connection pipe with brass unions. 45 cm15 mm nominal bore length 153 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:893115 mm nominal bore 154 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931 15 mm nominal bore 155 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 156 Providing & fixing soil, waste and vent pipes. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 100mm dia centrifugally cast iron S & S pipe. 157 Providing & fixing soil, waste and vent pipes. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 750mm dia centrifugally cast iron S & S pipe. 158 Providing and fixingGI pipes complete with GI fittings and clamps, including cutting and making good walls etc. ( for wash basin waste ) 32mm dia nominal bore 159 Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe. 100mm SS 304 grade coupling with EPDM rubber gasket 160 Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe. 75mm SS 304 grade coupling with EPDM rubber gasket 161 Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominalsize).Including cost of cutting holes & making good the walls etc. for 100mm dia pipe. 162 Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm 163 Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.Coupler 164 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 165 Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm 166 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. 167 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.15mm dia nominal outer dia pipes 168 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.20mm dia nominal outer dia pipes 169 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work-Exposed on wall 25mm dia nominal bore 170 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work-Exposed on wall 32mm dia nominal bore 171 Providing and fixing gun metal gate valve with wheel of approved quality. 20mm dia nominal bore 172 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
45.
Defence #10339003 Price Bid
tender for Expendable Medical Store Items Of Drugs , 010107Desflurane , 010111Thiopentone Inj Of 0.5 G Without Water For Injection , 010115Bupivacaine Hcl 5 Mg / Ml, 20 Ml Inj , 010116Bupivacaine Hcl 5Mg / Ml Heavy 4 Ml Inj , 010118Lignocaine Viscous 2 % Containing Lignocaine 21.3 Mg, Methyl Paraben 0.61 Mg, Propyl Paraben 0.27 Mg / Ml In Bott Of 100Ml , 010119Lignocaine Hcl 2 Percent ( Without Adrenaline ) 30Ml Inj ( Suitable For Ophthalmic Use Also ) , 010123Lignocaine Hcl 2% With Adrenaline ( 1:80000 ) 2 Ml Cartiradge , 010127Nelectrolyte Solution For Sterigen ( Pack Of 20L ) , 010129Lignocaine Hcl Jelly 2% Tube Of 30 Gm With Sterile Tube And Short Nozzel Suitable For Intra Uretheral Use, Should Be Packed Within A Sterile Blister Pack , 010135Midazolam 5 Mg, 1 Ml Inj , 010201Paracetamol 650Mg Tab , 010202Diclofenac 100Mg Suppository , 010255Common Cold Tab ( Cetirizine 5-10 Mg + Paracetamol 500 Mg + Pseudoephedrine 30-60 Mg ) , 010256Deflazacort 6 Mg Tab , 010257Diclofenac Sodium 50 Mg, Enteric Coated Tab , 010258Diclofenac 25Mg / Mlip, 3Ml Inj , 010261Ibuprofen Syrup 100Mg / 5Ml Bott Of 50 Ml ( Cdl ) , 10262Ibuprofen 400 Mg Tab , 010273Naproxen 250Mg Tab , 10277Paracetamol Syp 125Mg / 5Ml Bott Of 60 Ml , 010278Paracetamol 325 Mg And Ibuprofen 400 Mg Tab , 010282Fentanyl Citrate 50 Mcg / Ml, 2 Ml Inj , 010283Fentanylcitrate 50 Mcg / Ml, 10 Ml Inj , 010284Morphine 15Mg, 1 Mlinj , 010291Ketorolac 10 Mg Tab , 010293Tramadol Hcl 50 Mg Cap / Tab ( Cdl ) , 010294Tramadol Hcl 50 Mg / Ml, 1 Ml Inj , 010300Betamethasone 4 Mg 1 Ml Inj , 010302Cetrizine Dihydrochloride 10 Mg Tab , 010305Fexofenamide 30Mg / 5 Ml In 60Ml Bott , 010306Montelukast 10 Mg + Levocetrizine 5 Mg Tab ( Montair Lc ) , 010307Promethazine Syp 5 Mg / 5 Ml Bott Of 60 Ml , 010310Dexamethasone Sodium Phosphate 4.4 Mg ( Equivalent To Dexamethasone Phosphate 4 Mg / Ml ) 2 Ml Inj , 010314Hydrocortisone Sodium Succininate 100 Mg Inj , 010315Tab Montelukast 10 Mg , 010318Pheniramine Maleate Inj 22.75 Mg Per Ml Amp Of 2 Ml , 010319Nor Adrenaline Bitartrate 2 Mg / Ml, 2 Ml Inj , 010320Pheniramine Maleate 25 Mg Tab , 010322Prednisolone 5 Mg Tab , 010402Naloxone Hydrochloride 1Mg / Ml Inj , 010433Penicillamine 250 Mg Tab , 010501Levetiracetam 100Mg / Ml, Vial Of 5 Ml Inj ( Old Niv / 1730 ) , 010502Zolmitriptan Nasal Spray 5 Mg, 7 Metered Doses , 010504Bethanechol 25Mg Tab , 010507Edaravone Injection 1.5 Mg / Ml, 20 Ml Vial, Each Ml Contains Edaravone 1.5 Mg, Water For Injection Ip Q.S , 010513Leveteracetam 1000 Mg , 010530Botulinum Toxin 200 Units, 1 Ml Inj , 010531Divalproate 500 Mg Tab , 010533Pregabalin 75 Mg Tab , 010534Levetiracetam 100 Mg / Ml, Syr / Soln / Liquid ( Bottle Of 100Ml ) , 010535Levetiracetam 500 Mg Tab , 010538Carbamazepine 200Mg Tab , 010539Carbamazepine 200 Mg Cr Tab , 010540Carbamazepine Syp 100 Mg / 5 Ml Bottle Of 100 Ml , 010541Clobazam 5 Mg Tab , 010544Diazepam 10 Mg, 2 Ml Inj , 010545Donepezil 5 Mg Tab , 010548Gabapentin 300 Mg Cap , 010553Phenytoin Oral Suspension Containing Phenytoin 100Mg / 4Ml Bottle Of 100 Ml , 010554Phenytoin Sodium 100 Mg Tab , 010557Daclatasvir 60 Mg Tab ( Old Niv 6851 ) , 010559Sodium Valproate Oral Solution 200Mg / 5Ml Bott Of 100 Ml ( Cdl ) , 010560Sodium Valproate 200 Mg Tab , 010563Lamotrigine 25 Mg Tab , 010567Topiramate 25 Mg Tab , 010568Rizatriptan 5 Mg Tab , 010569Peg-Interferon Beta 1A ( R-Dna Origin ) 125Mc / 0.5 Prefilled Pen ( Plegredy ) , 010571Sofosbuvir 400 Mg+ Ledipasvir 90 Mg ( Old Niv 6852 ) , 010572Inj Adalimumab 40 Mg , 010573Cap Sacchaomyces Boullardi 250 Mg Cap , 010579Budesonide 200Mcg Inhaler , 010581Budesonide 1 Mg Respule , 010582Canagliflozin 100 Mg Tab , 010583Carbimazole 20 Mg Tab , 010585Pentoxyphyllin400 Mg Tab , 010586Desmopressin 0.1Mg Tab , 010587Diacerin 50 Mg Tab , 010588Doxophyllin 400 Mg Tab , 010589 Dulaglutide 0.75 Mg Solution For Inj In Pre Filled Pen , 010591Gliclazide Xr 60 Mg + Metformin Xr 500 Mg Tab , 010592Gliclazide Xr 60 Mg Tab , 010595Mesalazine 500 Mg Tab ( Ph Independent ) , 010601Albendazole 400 Mg Tab , 010603Sitagliptin 50 Mg + Metformin 500 Mg Tab , 010606Spacer Device For Inhaler , 010609Tolvaptan 15 Mg Tab , 010611Diethylcarbamazine 50Mg Tab , 010625Indacaterol 110Mcg And Glycopyrronium 50 Mcg ( Box Of 30 Cap And 1 Inhaler ) , 010626Amitriptyline 25 Mg Tab , 10627Artesunate 25Mg+ Sulfadoxine 250Mg+ Pyremethamine 12.5 Mg Tab ( Cdl ) , 010628Itopride 50 Mg Tab , 010630Rifabutin 150Mg Cap , 010632Rifampicin Oral Susp 100Mg / 5Ml Bottle Of 60 Ml , 010634Rifampicin 150 Mg Cap , 010636Rifampicin 450Mg + Isoniazid 300Mg Combination Cap ( Cdl ) , 010645Pyrazinamide 1500 Mg Tab ( Cdl ) , 010652Amphotericin-B 50 Mg Inj , 010654Amphotericin Lipid Complex 50Mg Inj , 010655Amphotericin B Liposomal 50Mg Inj , 010656Clotrimazole Mouth Paint 1% Bottle Of 15 Ml , 010658Fluconazole 50 Mg Cap / Tab , 010660Fluconazole 150 Mg Cap / Tab , 010662Fluconazole Infusion 2 Mg / Ml 100 Ml Bott , 010665Caspofungin 50Mg / 10 Ml Inj In 10 Ml Vial , 010666Itraconazole 100Mg Cap , 010673Metronidazole 400 Mg Tab , 010675Artesunate 60Mg Inj , 10677 Sulphadoxine 500 Mg And Pyrimethamine 25 Mg Tab ( Cdl ) , 010678 Artemether 80Mg / Ml, 1 Ml Inj ( Cdl ) , 010681Chloroquine Phosphate 250Mg Tab , 010682Mefloquine 250 Mg Tab , 010683Primaquine ( 7.5Mg Base ) Tab , 010686Quinine 300Mg Tab ( Cdl ) , 010701Azathioprine 50Mg Tab , 010702Tab Afatinib 40Mg , 010703Tab Axitinib 5Mg , 010705Cyclosporine A Micro Emulsion 25 Mg Cap , 010706Cyclosporine A Micro Emulsion 100 Mg Cap , 010707Cyclosporine A Micro Emulsion 100 Mg / Ml Bottle Of 50 Ml , 010721Methyl Prednisolone Sodium Succinate 1000Mg Inj , 010725Mycophenolate Mofetil 500 Mg Tab , 010742Fentanyl 25 Mcg Transdermal , 010802Actinomycin D 0.5 Mg Inj , 010805Lomustine 40 Mg Cap , 010806Capecitabine 500 Mg Tab , 010807Chlorambucil 2.0Mg Tab ( Cdl ) , 010811Cyclophosphamide 500 Mg Inj Of 25 Ml , 010812Cyclophosphamide 50 Mg Tab , 010815Dacarbazine 200Mg Inj Of 2.8-4 Mg / Ml , 010817Docetaxel 20Mg 0.5Ml Vial + 1.5Ml Solvent For Inj , 010818Doxorubicin Hcl 2Mg / Ml, 5Ml Inj , 010821Etoposide 100Mg, 5 Ml Inj , 0108235-Fluorouracil 500Mg, 10 Ml Inj , 010824Transtuzumab 440 Mg Inj , 010828Ifosfamide Inj 1G Vial With 3 Amp Of 2 Ml Each Mesna , 010829Docetaxel 80Mg / 2Ml Vial 6 Ml Solvent For Inj , 010830Doxorubicin Hcl Inj 2Mg / Ml, 25 Ml Inj , 010831Gemcitabine 1000Mg Inj , 010832Gemcitabine 200Mg Inj , 010834Imatinib Mesylate 100 Mg Cap , 010835Irinotecan 100Mginj , 010838Melphalan 50Mg Inj , 010840Oxaliplatin 100Mg Inj , 010841Methotrexate Sodium 50Mg, 2 Ml Inj , 010843Methotrexate 2.5Mg Tab , 010844Oxaliplatin 50Mg Inj , 010845Infliximab 100Mg Inj , 010846Paclitaxel 30Mg Inj , 010847Paclitaxel 100Mg Inj , 010848Pegylated Liposomal Doxorubicin 20Mg Inj , 010850Rituximab 500Mg Inj , 010851Rituximab 100Mg Inj , 010853Vincristine Sulphate 1Mg Inj , 010854- Temozolamide 100Mg Cap , 010855Temozolamide 250Mg Cap , 010857Granulocyte Colony Stimulating Factor 300Mcg Inj , 010858Sunitinib Mesylate 12.5 Mg Tab , 010859Sunitinib 25 Mg Tab , 010863Imatinib Mesylate 400 Mg Cap , 010864Methotrexate 5 Mg Tab , 010870Bicalutamide 50 Mg Tab , 010871Ondansetron 2Mg / Ml Inj , 010872Ondansetron 8 Mg Tab , 010873Exemestane 25 Mg Tab , 010874Nruxolitinib 5 Mg Tab , 010879Anastrazole 1Mg Tab , 010880Tamoxifen Citrate 20 Mg Tab , 010883Nlenalidomide 10 Mg Cap , 010888Tab Sorafenib 200 Mg , 010889Everolimus 5 Mg Tab , 010890Everolimus 10 Mg Tab , 010891Sunitinib 50 Mg Tab , 010892Inj Pegylated Gcsf 6 Mg , 010893Omalizumab 150 Mg Solution For Injection Ineach 1 Ml, Pre Filled Syringe ( Pfs ) , 010894Inj Cetuximab 100 Mg , 010895Lapatinib 250 Mg Tab , 010896Nilotinib 200 Mg Tab , 010898Pemetrexed 500 Mg Powder For Inj , 010899Abiraterone Acetate 250 Mg Tab , 010910Amantadine 100 Mg Cap , 010917Levodopa 250 Mg With Carbidopa 25 Mg Tab , 010925Rasagiline 1 Mg Tab , 010926Trihexyphenidyl Hcl 2 Mg Tab , 010928Interferon Beta 1B 250 Mcg Inj , 010931Methylcobalamine 1500 Mcg Tab , 010932Botulinum Toxin A 50 Units Inj , 010933Topiramate 50 Mg Tab , 011001Recombinant Human Tissue-Typeplasminogen Activator ( Tpa ) Powder Forinjection 20 Mg , 011002Inj Methoxy Polyethylene Glycol - Epoetinbeta 75 Mcg / 0.3 Ml Vial ( Old Niv / 4304 ) , 011008Desferasirox 400 Mg Tab , 011010Erythropoeitin 10, 000 Iu Inj , 011012Dasatinib 50 Mg Tab ( Bottle Of 60 Tab ) , 011015Nilotinib 150 Mg Tab , 011016Decitabine 50 Mg Inj , 011018Ninj Azacytidine 100 Mg , 011020Cap Ibrutinib 140 Mg , 011021Recombinant Factor Viii ( Human Plasma / Albumin Free + Viral Inactivation Throughsolvent Detergent Treatment Step ) , 011023Inj Daratumumab 100 Mg , 011024Inj Daratumumab 400 Mg , 011025Heparin 5000 Iu / Ml Inj , 011028Acenocoumarol4 Mg Tab , 011029Acenocoumarol 1 Mg Tab , 011030Protamine Sulphate 1% W / V, 5 Ml Inj , 011031Recombinant Factor Viia 2Mg Inj , 011032Tranexamic Acid 500 Mg / 5Ml Inj , 011034Tranexamic Acid500 Mg Tab , 011049Inj Nivolumab, Vial Of 100 Mg , 011050Inj Nivolumab, Vial Of 40 Mg , 011053Inj Pertuzumab420 Mg , 011054Inj Ado Trastuzumab Emtansine ( Tdm-1 ) Vial Of 100 Mg , 011056Inj Atezolizumab 1200 Mg , 011057Tab Alectinib 150 Mg , 011058Inj Ramucirumab Vial Of 500 Mg , 011059Inj Ramucirumab Vial Of 100 Mg , 011061Inj Nano Liposomal Docetaxel Vial Of 80 Mg ( Old Niv / 7224 ) , 011062Inj Nano Liposomal Docetaxel Vial Of 20 Mg ( Old Niv / 7223 ) , 11072Inj Tenecteplase 20 Mg ( Old Niv / 9470 ) , 011100Atorvastatin 20 Mg Tab , 011101Carvedilol 3.125 Mg Tab , 011102Carvedilol 12.5 Mg Tab , 011103Tab Ticagrelar 90 Mg , 011105Diltiazem ( Controlled Delivery ) 90 Mg Tab , 011106Fenofibrate200 Mg Tab , 011108Isosorbide Dinitrate10 Mg Tab , 011109Isosorbide Mononitrate 20 Mg Tab , 011110Ndabigatran 110Mg Tab , 011112Nicorandil 48 Mg Inj , 011113Nicorandil 10 Mg Tab , 011114Bosentan 62.5 Mg Tab , 011115Torsemide 10 Mg ( Scored Tab ) , 011116Perindopril 8 Mg Tab , 011119Nglyceryl Trinitrate Cr 2.6 Mg, Tab ( Nitroglycerine Trinitrate Tab ) ( Old Niv / 996 ) , 011120Simvastatin20mg Tab , 011126Amiodarone Hcl 150 Mg, 3 Ml Inj , 011127Amiodarone Hcl200 Mg Tab , 011131Prasugrel Hcl 5 Mg Tab , 011133Rosuvastatin 5Mg Tab ( Old Niv / 3965 ) , 011140S Amlodipine 5 Mg Tab , 011141Atenolol 50 Mg Tab , 011142Atenolol25 Mg Tab , 011145Nebivolol 5 Mg Tab , 011146Labetalol Hcl100 Mg Tab , 011147Metoprolol Tarterate 50 Mg Tab , 011149Metoprolol 1 Mg / Ml, 5 Ml Inj , 011151Propranolol Tr 40 Mg Tab , 011152Ramipiril 2.5 Mg Tab , 011153Sodium Nitroprusside 50 Mg, 5 Ml Inj , 011154Tab Ivabridine 5Mg ( Old Niv / 2708 ) , 011155Digoxin 0.25 Mg Tab , 011156Digoxin 0.5 Mg, 2 Ml Inj , 011158Tab Sacubitril 24 Mg + Vasartan 26Mg ( Old Niv / 7332 ) , 011159Metoprolol Xl 25 Mg Tab ( Old Niv / 568 ) , 011162Dobutamine Hcl 250 Mg, 5 Ml Inj , 011164Aspirin 75 Mg Tab , 011166Abciximab 2 Mg / Ml, 5 Ml Inj , 011168Clopidogrel 75 Mg Tab , 011169Enoxaparin 20 Mg / 0.2Ml Inj , 011170Enoxaparin 40 Mg / 0.4Ml Inj , 011171Enoxaparin 60 Mg / 0.6Ml Inj , 011174Aspirin 150 Mg Tab , 011175Warfarin 5 Mg Tab , 011177Metoprolol Extended Release 50 Mg Tab , 011180Clonidine 100 Mcg Tab , 011181Hydrochlorothiazide 25 Mg Tab , 011182Telmisartan 40 Mg Tab , 011184Indapamide Sr 1.5 Mg Tab , 011185Labetalol Hcl5mg / Ml, 4Ml Inj , 011186Losartan 25 Mg Tab , 011187Losartan 50 Mg Tab , 011188Phenylepherine 10 Mg, 1 Ml Inj , 011189Prazosin2.5 Mg Sustained Release / Slow Release Tab , 011190Prazosin5 Mg Sustained Release / Slow Release Tab , 011191Ramipiril 5 Mg Tab , 011192Ramipril 10 Mg Tab , 011193Enalapril 5 Mg Tab , 011195Perindopril 4Mg Tab , 011197Telmisartan 40 Mg + Hydrochlorothiazide 12.5 Mg Tab , 011202Bisoprolol 5 Mg Tab ( Old Niv / 2546 ) , 011246Antiseptic Mouth Wash Containing Sodiumfluoride And Triclosan Bott Of 100-150Ml , 011271Triamcinolone Acetonide 0.1% For Oral Use, Tube Of 5 Gm , 011301Adapalene 0.1% Tube Of 15 Gm , 011303Halobetasol Propionate 0.05% + Salicylic Acid 3% Oint Tube , 011305Tacrolimus 0.03% , 20 Gm Tube , 011306Benzoyl Peroxide 2.5% Tube Of 20 Gm , 011307Sertaconazole Nitrate 2% Cream Tube , 011309Ointment Betamethasone Dipropionate0.05 Percent And Salicylic Acid 3 Percent, Tube Of 20Grams , 011315Zinc Oxide / Titanium Dioxide Bottle ( Spf 25-50 ) Sunscreen Lotion Bottle Of 60 Ml , 011320Clobetasol Propionate Cream 0.05% In Tube Of 10 Gm , 011322Clotrimazole Cream 1% Tube Of 15 Gm , 011328Fexofenadine 180 Mg Tab , 011329Fluticasone 0.05Percent W / W Cream 10 Gm Tube , 011340Ketoconazole 2% + Zinc Pyrithione 1%Bottle Of 60 Ml , 011345Mometasone 0.1% Tube Of 10 Gm , 011346Mupirocin 2% Oint Tube Of 5 Gm , 011350Permethrin 5% Tube Of 30 Gm , 011356Salicylic Acid 3.5% + Coal Tar 1-3% Solutionbott , 011363Silver Sulphadiazine 1% Cream W / V Jar Of 500 Gms , 011364Triamcinolone 40 Mg / Vial Inj , 011374Triamcinolone Acetate 10 Mg, 1 Ml Inj ( Kenacort Inj ) , 011381Voriconazole 200 Mg Tab , 011389Terbinafine Hcl 250 Mg Tab , 011390Isotretinoin 10 Mg Tab , 011391 Fusidic Acid Cream 2% W / W 10 Gm Tube , 011398Para Dichlorobenzene 2%, Benzocaine 2.7%, Chlorbutol 5%, Terpentine Oil 15% Bott Of 10Ml ( Waxsolve ) Ear Drops ( Old Pvms 012136 ) , 0114010.55% W / W Phthaladehyde ( 1, 2-Benzene Dicarboxaldehyde ) Solution , 011409Potassium Monopersulphate 40-50%, Sodium C 10-13 Alkylbenzenesulphonate 10-20%, Sodium Chloride 1-5% Powder , 011411Dexamethasone 0.7Mg Intravitreal Implant With Applicator ( Sterile ) ( Old Niv / 4711 ) , 011414Enzymatic Detergent Solution Containing Bacterial Protease 5%, Alpha-Amylase 5%, Lipase 5%, Cellulase 5%, Sodium Tetraborate Decahydrate 8.5% 100Ml Bott , 011429Chlorhexidine Gluconate Solution Equivalent To 4% W / V With Isopropanallt;10%, Ethoxylated Alkylphenol1lt;0%, Fatty Acid Diethanolamide Lt;;10%, Acetic Acid Glacial 10%, Cellulose And Fragrance Lt;10% 500 Ml Bott With Dispenser , 01143760% V / V Ethyl Alcohol With Benzalkonium Chloride, Glycerine, Dimethicone Cyclopentasiloxane , C12-15 Alkyl Lactate, Proylene Glycol, Methylparaben, Phenoxythanol, Stearyl Alcohol, Aminomethyl Propanol, Diazolidinyl Aurea With Moisturizer 1Ltr Bott , 0114400.5% W / V Chlorhexidine Gluconate In 75% V / V Ethyl Alcohol With Moisturizer 500 Ml Bott With Dispenser / Alcoholic Hand Disinfectant K Pureb , 0114431% W / V Available Iodine In Nonoxynol Iodine Surfactant Base 500 Ml Bott , 011446Chlorhexidine Gluconate 2% In 70% Isopropyl Alcohol 500 Ml Bott , 011449Propan-2-Ol 63.0G ( Equals 72 Vol% ) Benzalkonium Chloride 0.025G Purified Water Sunset Yellow Dye 500Ml Bott , 011465Chloroxylenol Solution Potassium Hydroxide-13.6 Gm, Chlaroxylenon Solution 50G, Oleic Acid-7.5% Castor 011-63.0G, Terpineal-100 Ml, Ethano ( 96% ) -200 Ml ) Purrified Water Freshly Boiled And Cooled To Produce 1000 Ml Also Acceptable Chloroxylenol , 011472Hydrogen Peroxide Solution With Stabilizer Ip ( 20 Volume ) 400 Ml Bott , 011476Chlorhexidine Solution Containing Chlorhexidine Gluconate Bp 7.5% V / V Cetrimide Bp 15% 500Ml Bott , 011502Acetazolamide 250 Mg Tab , 011503Dutasteride 0.5 Mg Tab , 011506Tab Sacubitril 49 Mg+ Valsartan 51 Mg ( Vymada ) , 011507Frusemide 40 Mg Tab , 011508Frusemide 20 Mg, 2 Ml Inj , 011518Spironolactone 25 Mg Tab , 011601L-Ornithine L Asparate 5Gm, 10Ml Inj , 011603L- Ornithine L Asparate Powder 5Gm , 011607Ursodexycholic Acid 150Mg Tab , 011609Ribavirin 200Mg Cap , 011611Human Albumin 20 Percentage In Bott Of 100Ml , 011615Terlipressin 1Mg + 5Mlsterile Diluent Inj , 011619Polidocanol 3% 2 Ml Inj , 011620Pancreatic Enzyme Suppliment With A Lipase Content Of 25000 Units Or More Cap , 011622Antispasmodic Tab Containing Mefenamic Acid 250 Mg And Dicyclomine Hcl 10 Mg ( Tab Meftal Spasm ) , 011624Tenofovir 300 Mg Tab , 011626Probiotic ( Multibacillary-4 Or More Organisms ) Cap , 011627Entacavir 0.5 Mg Tab , 011628Ademetionine 400 Mg Tab , 011630 Chewable Antacid Tab ( Cdl ) Digene Tab , 011632Antacid Gel Each 5Ml Containing Dried Aluminium Hydroxide Gel Ip 250Mg, Magn Esium Hydroxide Nf 250Mg And Methyl Polysiloxane 50Mg Bottle Of 170 Ml , 011633Clarithromycin 500 Mg Tab , 011635Zoladronic Acid 4 Mg Powder For Inj , 011637Pantoprazole 40Mg Tab , 011639Sucralfate Suspension 1Gm / 5Ml Bott Of 200 Ml , 011641Ranitidine Hcl50 Mg, 2 Ml Inj , 011645Domperidone 10 Mg Tab , 011646Palonoseteron 0.25 Mg Inj Of 5 Ml , 011648Metoclopramide 10 Mg Tab , 0116565-Amino Salicylic Acid Enema 4G , 011658Hydrocortisone Enema 10% W / W ( Cdl ) , 011659Sulphasalazine 500 Mg Tab , 011660Dicyclomine Hcl 20 Mg / 2 Ml Injof 2 Ml , 011669Hyoscine Bromide Inj 20 Mg / Ml, 1Ml Inj , 011680Lactulose Syp, Bottle Of 100 Ml , 11681 Sodium Phosphate Solution 45 Ml Each Pack Of 2 Bottle ( Cdl ) , 011682Paraffin Liq Bottle Of 100 Ml , 011682Oldamoxy 500 Mg Cap , 011692Ornidazole 500 Mg + Ofloxacin 200 Mg Tab , 011693Loperamide 2Mg Tab , 011694Saccharomyces Boulardii Pdr 250Mg ( New Pvms No 010600 ) , 011704Fludrocortisone 0.1Mg Tab , 011705Ibandronate 150 Mg Tab , 011706Thyroxine Sodium 50 Mcg Tab , 011707Metformin Sr 500 Mg Tab , 011708Metformin Sr 1 Gm Tab , 011710Liraglutide 6 Mg Per Ml Pfs, Pen Of 3 Ml , 011711Recombinant Human Growth Hormone 5 - 15 Mg Inj Or Eqyuivalent In Ius , 011715Goserlin 10.8Mg Inj , 011718Insulin Lispro25% And 75% Insulin Lispro Protamine Suspension 300 Iu Pre Filled Pen , 011721Carboprost Tromethamine 250 Mcg / Ml 1Ml Inj , 011722Ethinyl Estradiol 0.035 Mg, Cyproterone Acetate 2 Mg ( Pack Of 21 Tablets ) , 011723Clomiphene Citrate 50 Mg Tab , 011724Doxylamine Succinate 10 Mg Usp + Pyridoxine Hydrochloride 10 Mg Ip Tab ( Doxinate Tab ) ( Cdl ) , 011726Mifepristone 200 Mg Tab , 011728Misoprostol 100 Mcg Tab , 011729Dydrogesterone 10 Mg Tab , 011731Natural Micronised Progesterone 100 Mg Tab , 011737- Darbepoetin Alfa ( R-Dna Origin ) 200 Mcg , 011738Hydroxyprogesterone Caproate 500 Mg / 2 Ml ( Proluton Depot ) Inj , 011739Clotrimazole Vaginal100mg Pessary , 011740Saxagliptin 5Mg Tab ( Old Niv / 4109 ) , 011742Prednisolone 20 Mg Tab , 011745Levonorgestrol Intra Uterine System , 011746Ethinylestradiol 0.03 Mg + Levonorgestrel 0.25 Mg ( Pack Of 21 Tab ) ( Cdl ) , 011749Medroxy Progesterone Acetate10 Mg Tab , 011752Northisterone 5Mg Tab , 011754Conjugated Oestrogen 0.625 Mg Tab , 011758Magnesium Sulphate 50% W / V Inj , 011761Acarbose 50 Mg Tab , 011762Glimepride 1 Mg Tab , 011763Glimepride 2 Mg Tab , 011764Insulin Premixed Biphasic40 Iu Per Ml ( 30% Human Neutral Plus 70% Human Isophane Insulin ) , 10 Ml Inj , 011765Voglibose 0.2 Mg Tab , 011766Human Insulin Analogue Rapid Acting Inj 100 Iu / Ml ( Recombinant Dna Origin ) 300 Iu Disposable Pen With 5 Needles Per Pen , 011767Human Insulin Analogue Long Acting Basal Inj, 100 Iu / Ml ( Recombinant Dna Origin ) 300 Iu Disposable Pen With 5 Needles Per Pen , 011768Sitagliptin 100 Mg Tab , 011770Glipizide 5Mg Tab , 011772Human Insulin Analogue Aspart Premix 30% Insulin / 70% Insulin Protamine Aspart Suspension 100 Iu / Ml ( Monocomponenent Insulin, Recombinant Dna Orgin ) 3 Ml Pfs / Pfp Inj , 011775Sitagliptin 50 Mg + Metformin 1000Mg Tab , 011778Sirolimus 1Mg Tab , 011781Empaglifozin 10 Mg Tab , 011782Highly Purified Human Natural Insulin Inj 40 U / Ml 10 Ml Vial , 011782Nempaglifozin 25 Mg Tab , 011783Linagliptin 5Mg Tab , 011789Thyroxine Sodium 0.025 Mg Tab Pack Of 100 Bottle , 011790Thyroxine Sodium 0.1Mg Tab , 011791Teriparatide 750 Mcg / 3 Ml Inj , 011792Alendronate Sodium 70 Mg Tab , 011793Human Chorionic Gonadotrophin 2000 Iu Inj , 011799Thyroxin Sodium 12.5 Mcg Tab , 011802Atracurium 10 Mg / Ml, 2.5 Ml Inj , 011832Pyridostigmine 60 Mg Tab , 011850Vecuronium Bromide4 Mg / Ml, 1 Ml Inj , 011904Inj Methoxy Polyethylene Glycol Epoetin Beta 50 Mcg Pfs ( Old Niv / 4303 ) , 011955Alfacalcidol Vit D3 0.25Mcg Cap , 011956Anti Thymocytic Globulin 250 Mg ( Equine ) 5 Ml Inj , 011957Valganciclovir 450 Mg Tab , 011958Inj Antihuman T Lymphocyte Immunoglobulin ( Atlg ) - Rabbit, 100 Mg / 5 Ml , 011959Anti Rabbit Human Thymocyte Globulin 25 Mg 5 Ml Inj , 011961Basiliximab 20 Mg Inj , 011962Flavoxate 200 Mg Tab , 011963Calcium Acetate 500 Mg Tab , 011969Erythropoietin Recombinant Human 4000 Iu , 011971Mycophenolate Mofetil Sodium 360 Mg Tab , 011979- Tacrolimus 1Mg Tab , 011980Tacrolimus 0.5Mg Tab , 011981Sevelamer 400 Mg Tab , 011985Everolimus 0.25 Mg Tab , 011986Darbepoietin Alpha 25 Mcg Inj , 011990Sodium Bicarbonate 500 Mg Tab , 011992Human Insuline Analogue Glargine Inj 100 Iu / Ml ( Rec Dna Origine ) 300 Iu Disposable Pen With 5 Needles Per Pen , 012002Timolol 0.5% Preservative Free With Comod System , 012005Ciprofloxacin 0.3Percent Eye Drops Of 3Mg / Ml Bott Of 5 Ml , 012006Ciprofloxacin Hcl 0.3% Tube Of 5 Gm , 012009Ciprofloxacin Hcl 0.3% + Dexamethasone 0.1 % Bott Of 5Ml , 012013Flurbiprofen Sodium Ophthalmic Sol 0.3% Vial Of 5 Ml , 012018Ketotifen Fumarate 0.05% Eye Drops, Bottle Of 5Ml ( Cdl ) , 012020Brimonidine Tartrate 0.2%, Eye Drops Bottle Of 5Ml , 012022Latanoprost 0.005% With 0.5% Timolol Eye Drop Bott Of 2.5 Ml , 012026Lignocaine Hyrochloride 4% Topical Solution Bott Of 30 Ml , 012027Carboxy Methyl Cellulose 1% Eye Drop Bott Of 10 Ml ( Cmc ) , 012030Hydroxy Methyl Cellulose 2%, 2 Ml Inj , 012032Dorzolamide 2% Eye Drops , 012034Ofloxacin 0.3% Bott Of 5 Ml , 012041Prednisolone Acetate 1Percent W / V Bott Of 5 Ml , 012048Sodium Hyaluronate Opthalmic Sol 1% ( 10Mg / Ml ) Pre Filled Solution ( For Intra Ocular Use ) 2.5 Ml , 012053Timolol Maleate Eye Drop 0.5% Bott Of 5 Ml , 012054Tobramycin 0.3Percent Bott Of 5 Ml , 012055Tropicamide 1% With 5% Phenylephrine Eye Drop Bott Of 5 Ml , 012058Tropicamide Eye Solution 1%, Bott Of 5 Ml , 012059Trypan Blue 0.6% In Vial Of 1Ml Inj , 012062Atropine Sulphate 1% W / V Bott Of 3 Ml , 012066Bimatoprost 0.03% Bott Of 3Ml , 012067Bevacizumab 100Mg / 4Ml Vial Inj , 012070Ranibizumab 2.3 Mg / 0.23 Ml Inj , 012101Diphenhydramine 10-15 Mg Per 5 Ml And Ammonium Chloride 100-150 Mg, Sodium Citrate 50-85 Mg Per 5 Ml Bottle Of 100 Ml , 012102Fluticasone Propionate 50Mcg Bp Nasal Spray Of 10 Ml , 012103Sodium Chloride 0.65% W / V Nasal Drop Of 15Ml , 012104Azelastine Hcl 140Mcg + Fluticasone Propionate 50Mcg Nasal Spray , 012107Momentasone Nasal Spray 50 Mcg Per Dose Bottle Of 10 Ml , 012111Betahistine Dihydro Chloride 8Mg Tab , 012112Betahistine 16 Mg Tab , 012116Prochlorperazine Maleate 5 Mg Tab , 012122Clotrimazole 1% W / V Ip+ Lignocaine 2% W / V Ip Ear Drop Bott Of 10Ml , 012131Nasal Decongestant Tab ( Phenylpropanolamine With Chlorpheniramine ) , 012136Para Dichlorobenzene 2% W / V Benzocaine 2.7% W / V Chlorbutol 5%, Turpentine Oil 15%, W / V ) Bott Of 10 Ml ( New Pvms 011398 ) , 012145Xylometazoline Hcl 0.05% W / V Nasal Solution Bott Of 10Ml ( Cdl ) , 012205Liposomal Amphotericin-B 10 Mg Vial For Inj ( Cdl ) , 012206Cefixime Syp 50Mg / 5Ml Bott Of 30 Ml , 012207Cefaclor Syp 125Mg / 5Ml Bott Of 30 Ml , 012208Midazolam Nasal Spray 0.5 Mg / Spray 5 Ml Bottle , 012216Digoxin Elixir 0.05Mg / Ml In 30 Ml Packages ( Cdl ) , 012226Metronidazole Susp 200 Mg / 5Ml Bott Of 60 Ml , 012238Ondansetron Syp 2 Mg / 5Ml In Bott Of 30 Ml , 012243Prednisolone Syp 5Mg / 5Ml In Bott Of 30 Ml , 012246Levo Salbutamol Syrup 1 Mg / 5Ml Bottle Of 100 Ml , 012247Surfactant ( Natural ) 25 - 80 Mg / Ml Inj Of 8 Ml , 012301Alprazolam 0.25 Mg Tab , 012308Doxepin 25 Mg Cap , 012312Risperidone Prolonged Release Suspension Of 50 Mg In 2 Ml Amp For Inj , 012314Clozapine 100 Mg Tab , 012316Duloxetine 20 Mg Tab , 012318Escitalopram 10 Mg Tab , 012320Fluvoxamine 50 Mg Cap , 012324Haloperidol5 Mg / Ml 1Ml Inj , 012330Memantine 10 Mg Tab , 012331Lithium Carbonate 300 Mg Cap / Tab , 012332Mirtazapine 15 Mg Tab , 012335Nortriptyline 25 Mg Tab , 012336Naltrexone 50Mg Tab , 012346Etizolam 0.5 Mg , 012348Risperidone 2 Mg Tab , 012349Risperidone 4 Mg Tab , 012350Risperidone 1 Mg / Ml Syp In Bott Of 30 Ml , 012353Aripiprazole 10 Mg Tab , 012354Atomoxetine 10 Mg Tab , 012373Quetiapine 50 Mg Tab , 012375Paroxetine Cr 12.5 Mg Tab , 012376Amisulpride 200 Mg Tab , 012377Quetiapine 100 Mg Tab , 012406Glycopyrronium Inhalation Solution 25Mcg / Ml ( 5 Respules Of 2Ml Each ) , 012459N-Acetyle Cysteine 600Mg Tab , 012461Etophyllin 84.7Mg And Theophyllin 25.3Mg / Ml 2Ml Amp , 012469Etophylline 115Mg And Theopohylline 35 Mgin Slow Release Form Tab , 012475Levo Salbutamol Aerosol Inhalation Pack Of 200 Doses ( Each Metered Dose Supplies 50 Mcg Of Levo Salbutamol ) , 012477Tiova Inhaler , 012484Tiotropium Bromide 18 Mcg Dry Powder Cap , 012489Bcough Expectorant Syp 5Ml Containing Diphenhydramine Hcl 14.08 Mg Ammonium Chloride 0.138 Gm, Sodium Citrate 57.03 Mg, Menthol 1.14 Mg On Flavoured Syp Base Bott Of 100Ml. , 012491Cough Sedative Syp Each 5 Ml Containing Chlorpheniramine Maleate 2.5Mg Guaifenesin 100Mg Noscapine 15Mg Sodium Citrate 60Mg In Flavoured Base Bott Of 100 Ml , 012492Codeine Phosphate 10 Mg + Chlorpheneramine Maleate 4 Mg Per 5 Ml Bottle Of 100 Ml Syp , 012493Terbutaline Sulphate 1.25 Mg + Bromhexine Hcl 4 Mg + Guaiphenesin 50 Mg Per 5 Ml Botle Of 100 Ml Syp , 012504Dextrose Monohydrate For Oral Use Pack Of 100 Gms , 012513Amino Acid Preparation Iv Bott Of 200-250Ml , 012518Potassium Chloride 15% Inj ( Iv ) Amp Of 10 Ml ( 1.5Gm ) , 012528Sterile Water For Amp Of 10 Ml ( Cdl ) , 012602Teicoplanin 200 Mg Inj , 012606Linezolid 600 Mg Tab , 012636Micronized Flavanoid Fraction 1000 Mg Tab ( Daflon 1000 ) , 012641Povidone Iodine 10% Solution, Bott Of 100 Ml ( Cdl ) , 012654Tpn 1Ltr Triple Chamber Bag For Central Vein Contain Proteins 30-50 Gm / I, Lipid 30-45 Gm / I Glucose 100-160 Gm / I , 012656Tpn For Peripheral Vein Pack Of 1000 - 2500 Ml , 012662Nadifloxacin 1%, Tube Of 15 Gm , 012670Cilostazole 100 Mg Tab , 012681Desmopressin Acetate Nasal Spray 1 Mcg / Ml Bott Of 5 Ml , 012682Terazosin 2 Mg Tab , 012684Sildenafil Citrate 50 Mg Tab , 012685Potassium Citrate And Citric Acid 1.53 Gm / 5 Ml Oral Solution 200 Ml , 012686Tamsulosin Hydrochloride 0.4 Mg Tab / Cap , 012687Tolterodine Tartrate 2 Mg Tab , 012704Pyridoxine 100 Mg Tab , 012705Vitamin B Complexwith A Minimum Concentration Of Vit B1-5Mg, Vit B6-3Mg And Vit B12-5Mcg Therapeutic Tab / Cap , 012708Calcium Carbonate 500 Mg Tab ( Elemental ) And Vitamin D3 200 Iu To 250 Iu Tab , 012714Iron Syp With Vitamins Each 5 Ml Containing 25 Mg Elemental Iron , Folic Acid - Minimum- 5 Mcg With Or Without Multivitamins In A Bottle Of 200 Ml , 012718Multi Vit Inj Iv 2-10 Ml With Minimum Constituents Having Thiamine ( B1 ) -30Mg / Ml, Pyridoxine ( B6 ) 30Mg / Ml And ( B12 ) Cyanocobelemine-300Mcg / Ml Of 3 Ml , 012721Multivitamin Drops With Constituents Having Vit A, Vit B1-, Vit B2-, B6-, Vit C-, Vit D-, Zinc- Bottle Of 15 Ml Dosage As Per Rec By Daily Allowances Of 3 Ml , 012728Vitamin B1 ( 100Mg ) , B6 ( 100Mg ) And B12 ( 1000Mcg ) 2 Or 3Ml Inj , 012734Vit D-3, 60, 000 Iu Per 1 Gm Sachet , 012802Inj Degludec 100 Iu / Ml 3Ml Pfs ( Niv / 7479 ) , 012805Inj Denosumab 60 Mg , 012807Human Insulin Analogue Glargine ( Recombinant Dna Origin ) 450 Iu / 1.5 Ml Pfs Disposable Pen With 5 Needles Per Pen , 012810Azelastine Hcl 140Mcg + Fluticasone Propionate 27.5Mcg / Dose Nasal Spray , 012814Budesonide 0.5 Mg Respules , 012816Cycloserine 250 Mg Cap , 012820Ethionamide 250 Mg Tab , 012834Formoterol 6 Mcg + Budesonide 400Mcg Cfc Free Mdi ( Foracort ) , 012844Methyl Prednisolone Sodium Acetate 40 Mg Inj , 012846Montelukast 5 Mg Tab , 012856Salmeterol 50 Mcg + Fluticasone 250 Mcg Pulverised For Inhailation Rotacap, Pack Of 30 Doses , 012856Adelivery System For Salmeterol+ Fluticasone Rotacaps With Pin Puncture Technology , 012858Salmeterol 50 Mcg + Fluticasone 250 Mcg Dry Powder Multidose Inhaler Of 60 Doses ( Niv / 4275 ) , 012862Levosalbutamol 50 Mcg + Ipratropium 20 Mcg Metered Dose Inhaler, 200 Dose Units, Cfc Free , 012864Levo Sulbutamol Sulphate 1.25 Mg + Ipratropium Bromide 500 Mcg In 2.5Ml Respules , 012912Celecoxib 100 Mg Tab , 012914Celecoxib 200 Mg Tab , 012920Diclofenac Gel 1 Percent Tube Of 30 Gm , 012922Fexofenadine Hydrochloride Tab 120 Mg , 012924Glucosamine 500 Mg Tab , 012925Glucosamine 250Mg+ Chondroitin Sulphate 200 Mg Cap , 012926Hydroxychloroquin 200 Mg Tab , 012934Methyl Prednisolone Sodium Acetate 80 Mg Inj2 Ml , 012936Methyl Prednisolone Sodium Succinate40 Mg Inj , 012940Methyl Prednisolone Sodium Succinate 0.5Gm Inj , 012951Etoricoxib 90 Mg Tab , 012952Methotrexate 15 Mg, 1 Ml Inj , 012953Inj Etanercept 25 Mg , 012955Methyl Prednisolone 4 Mg Tab , 013202Amoxycillin 500Mg + Clavulanic Acid 125Mg Tab , 013203Amoxycillin 875Mg + Clavulanic Acid 125Mgtab , 013204Amoxycillin 200Mg / 5Ml + Clavulanic Acid 28.5Mg / 5Ml Syp In 30 Ml Bott , 013205Amoxycillin 250Mg + Clavulanic Acid 50Mg 300 Mg Inj , 013206Amoxycillin 1G + Clavulanic Acid 200Mg, 1.2 Gm Inj , 013207Tigecycline 50 Mg Powder Of Inj , 013208Amoxycillin 250 Mg Cap , 013211Cefpodoxime Proxetil 200 Mg Tab , 013218Atazanavir 300 Mg, Retonavir 100 Mg Tab , 013219Tenofovir ( 300 Mg ) +Lamivudine ( 300 Mg ) +Efabirenz ( 600 Mg ) Combination Pill ( Trioday ) , 013220Raltegravir Tab 400 Mg , 013223Azithromycin Dihydrate 250 Mg Tab / Cap , 013225Artenether 80 Mg, Lumefantrine 480 Mg Tab ( Cdl ) , 013226Cefotaxime Sodium 1Gminj , 013229Ceftazidime 1Gm Inj , 013230Ceftriaxone 1Gm Inj , 013231Cefuroxime 250 Mg Tab , 013233Cefuroxime Susp 125Mg / 5Ml Bott Of 30 Ml , 013235Cefaclor 500 Mg Cap , 013236Ciprofloxacin 200 Mg / 100Ml Inj , 013237Ciprofloxacin250 Mg Tab , 013238Posaconazole 40 Mg / Ml Oral Suspension Bottle Of 105 Ml , 013239Cefipime 1Gm Inj , 013240Clarithromycin500mg Inj , 013241Clarithromycin 250 Mg Tab , 013242Clindamycin 300 Mg Cap , 013244Doxycycline Cap 100Mg , 013248Gentamycin Sulphate Inj Im / Iv40mg / Ml, 2 Ml Inj , 013250Imipenem 500 Mg + Cilastin 500 Mg Inj , 013251Levofloxacin 500 Mg In 100 Ml Inj ( Cdl ) , 013254Netilmicin Sulphate 200 Mg / 2Ml Inj , 013256Cefixime 200Mg Tab , 013258Piperacillin 4 Gm +Tazobactum 500Mg Inj , 013264Ticarcillin 3G + Clavulanic Acid 100 Mg Inj , 013266Azithromycin 500 Mg Tab , 013267Linezolid Infusion 200 Mg To 300 Mg / 100 Ml , 013268Meropenem 500Mg Inj , 013280Acyclovir 200 Mg Tab ( Cdl ) , 013282Acyclovir800 Mg Tab , 013284Acyclovir250 Mg Inj ( Cdl ) , 013287Emtricitabine 200 Mg + Tenofovir 300 Mg Tab , 013290Lamivudine 150 Mg Tab , 013292Nevirapine 200 Mg Tab , 013294Zidovudine 300Mg+ Lamivudine 150Mg Tab ( Cdl ) , 013295Efaverinz 600Mg Tab , 013298Zidovudine 300 Mg + Lamivudine 150 Mg + Nevirapine 200 Mg Tab , 013299Lopinavir 200 Mg + Ritonavir 50 Mg Co-Formulation Tab , 013409Inj Ranizumab Solution For Injection 10 Mg / Ml In Prefilled Syringe , 013410Polyethylene Glycol 400 Nf ( 0.4% ) , Propylene Glycol ( 0.3% ) , Sorbitol, Hp Gaur, Borate Polyquad 0.001%, 10 Ml Bottle , 013411Travoprost 40 Ug, Timolol 5 Mg Travoprost 4 Ug / Ml, Timolol Maleate Eq. Timolol 5.00 Mg / Ml, 2.5 Ml Bottle , 013414Cyclosporine Emulsion 0.05% With Glycerine, Castor Oil, Polysorbate 80, Carbomer 1342, Preservative Free Aa, Pack Of 30 Vials Of 0.4 Ml Each , 013415Nepafenac 0.1% Solution Eye Drops Of 5 Ml , 013601Thyroxine Sodium 75Mcg Tab , 013603Canagliflozin 300 Mg Tab , 013701Inj Nitroglycerine / Glyceryltrinitrate 5 Mg ( Old No 011119 ) , 013703Antacid ( Chewable ) Containing Dried Aluminium Hydroxide Ip 250Mg Mag Hydroxide Nf 250 Mg Methyl Poly Siloxane 50Mg Tab , 013802Eye Drop Povidone20 Mg / Ml, Preservative Free, Phosphate Free With Comod System , 013901Bortezumib Subcutaneous 3.5 Mg Inj , 013902Dexamethasone 4 Mg , 013921Denosumab 120 Mg Inj , 014717Dinoprostone ( Pge2 ) 10 Mg Pessary , 016101Atorvastatin 40 Mg , 016103Bisoprolol 2.5 Mg , 016104Carvedilol 6.25 Mg , 018101Clindamycin 600 Mg Inj 150 Mg Per Ml Of 4 Ml , 020001Anti Venom, Serum Polyvalent, Dry Amp Of 10 Ml ( Cdl ) , 020081Hepatitis B Vaccine 10 Ml , 020082Hbv- Vaccine 1 Ml , 020090Tetanushumanimmunoglobuline. , 020151Injectable Typhoid Vaccine0.5 Ml , 020167Rabies Vaccine Purified Vero Cell , 020170Pentavalent Vaccine ( Diptheria Pertusis, Tetanus, Hib And Hepatitis B ) , 020182Pneumococcal Vaccine 0.5 Ml Inj ( Pcv 13 ) , 020215Test Mantoux ( Sufficent For 10 Tests ) , 020221Human Rabies Immune Globulin 150 Iu / Ml, 2 Ml Vial ( Old Niv : Niv / 2587 ) , 040040Cable For Disposable Transducer Compatible With Transducer And Monitor , 040059Cylinder Oxygen ( O2 ) Gas For 7000 Ltr , 040070Ndouble Lumen Catheter Cannula With Guide Wire, Introducing Needle And Dialator , 040127Lighted Intubation Stylet Small / Medium / Large , 230068Self Sticking Label , 2703075% Dextrose Bottle Of 500 Ml , 270313Glucose Saline Isotonic Solution In Self Collapsible Bags Dextrose 5 % With 0.9 % Sodium Chloride ( Cdl ) Of 500 Ml , 29002343Isotonic Saline Normal Of 500Ml For Iv , 29002536Domperidone 10Mg Tab, Qty-10 , 29002543Fortwin 30 Mg Inj, Qty-04 , Niv / 01 / 2157Pantoprazole 40 Mg + Domperidone 10 Mg Tab Dup Stock Shifted To Niv / 5718 , Niv / 01 / 29Insulin Regular ( R ) , Niv / 0175Udca 300 Mg , Niv / 05Basic Fibroblast Growth Factor 0.10 % Lotion , Niv / 100Rabeprazole 20Mg Tab , Niv / 1005Sodium Valporate 133 Mg + Valporic Acid 58 Mg , Niv / 102Rizatriptan 10 Mg Tab , Niv / 1030Clindamycin 150Mg Cap , Niv / 10319Inj Cefoperazone 2 Gm + Sulbactam 1 Gm ( Magnex Forte 3G ) , Niv / 1034Nasal Saline 0.65% 20Ml Bott , Niv / 1035Nasal Saline 2% 20Ml Bott , Niv / 1043Levetiracetam 250 Mg Tab , Niv / 1048Proparacaine Hydrochloride 0.5% Eye Drop Of 2.5 Ml , Niv / 1049Sodium Valporate 335 Mg + Valporic Acid 145 Mg Tab , Niv / 1050Sodium Valporate 200 Mg + Valporic Acid 87 Mg Tab , Niv / 1051Novo Fine Needles Disposables For Growth Hormone / Insulins , Niv / 10519Tab Antoxipan ( Pack Of 15 ) , Niv / 10568Acyclovir Skin Cream 5% Tube Of 5 Gm ( Old Pvms No.011303 ) , Niv / 10575Enteral Feeding Powder With Protease Enzyme 50-100Gm Bottle ( 15-25 Gm Protein / Bottle ) , Niv / 1058Salmeterol 25 Mcg+ Fluticasone Proprionate 250 Mcg Mdi Inhaler , Niv / 1062Gabapentin 300 Mg + Methyl Cobalamin 500 Mcg , Niv / 10638Tab Mexiletine 150Mg , Niv / 10650Pegylated Recombinant Human Factor Viii 500 Iu , Niv / 10651Pegylated Recombinant Human Factor Viii 1000 Iu , Niv / 10729Capsule Midostaurin 25 Mg , Niv / 10730Tablet Azacitidine 300 Mg , Niv / 10731Tablet Azacitidine 200 Mg , Niv / 10826Tribulus Terrestris-250Mg Ubidecarenone 100Mg, Agrinine, Lycopene And Selenium ( Ubi-Q 100 ) Cap , Niv / 10828Tab Tofacitinib 11 Mg , Niv / 1092Clobazam 20 Mg Tab , Niv / 1098Cefoperazone 2 Gm Inj 1 Gm Available In Pv- 013224 , Niv / 1109Tissue Type Plasminogen Activator ( R-Tpa ) 50Mg Dupicate Of Pv 011173 , Niv / 1126Flupentixol Dacanote 40 Mg / 2 Ml Inj , Niv / 1146Pramipexole 0.5 Mg Tab , Niv / 118Carbidopa 25 Mg + Levodopa 100 Mg Tab , Niv / 1246Vitamin E + Fatty Acid + Omega 3 Containing Tab , Niv / 1253Pyridoxine 40 Mg Tab , Niv / 1258Telmisartan 20 Mg Tab , Niv / 1259Ropinirole 2 Mg Tab , Niv / 127Pregabalin 150 Mg Tab , Niv / 1274Lansoprazole 15 Mg Tab , Niv / 1276Glyceryl Trinitrate6.4 Mg / 6.5 Mg Tab , Niv / 1277Lactic Acid Bacillus With Vitamins , Niv / 1279Ropinirole 0.25 Mg Tab , Niv / 128Tiotropium Bromide 9 Mcg + Formetrol Fumerate 12 Mcg Inhaler , Niv / 133Budesonide Respules ( Duplicate Of 012814 ) , Niv / 144Sodium Chloride 3% Injection Bott Of 100Ml , Niv / 1545Ipratropium Bromide Respules , Niv / 155Cepae Extract, Allantoin, Heparin Sodium Gel , Niv / 1561Gatifloxacin + Prednisolone Eye Drops , Niv / 1592Zinc Acetate 20Mg Per 5Ml Syrup Of 100 Ml , Niv / 1662Oxcarbazepine 600 Mg Tab , Niv / 1670Diltiazem 30 Mg Tab , Niv / 1672Atorvastatin 10 Mg + Fenofibrate 160 Mg , Niv / 1721Hydroxyzine 10 Mg Tab , Niv / 1765Pioglitazone Hydrochloride 30 Mg Tab , Niv / 1778Spironolactone 50 Mg Tab , Niv / 1780Metoprolol 25 Mg Tab , Niv / 1787Vitamin E 400Mg Cap , Niv / 1799Esomeprazole 20 Mg Tab , Niv / 1800Atorvastatin 40Mg Tab , Niv / 1801Clobazam 10 Mg Tab , Niv / 1803Olmesartan 20 Mg Tab , Niv / 1824Tocilizumab 400 Mg / 20 Ml , Niv / 1826Itopride 150 Mg Tab , Niv / 1837Tolterodine Tartrate 4Mgsustained Release Cap , Niv / 1838Aztreonam 1Gm Injection , Niv / 1842Ondansetron 4 Mg / Ml Inj ( For Read Pv 010871 ) , Niv / 1903Salmetrol + Fluticasone 250 Mcg Inhalor , Niv / 1943Prednisolone 10 Mg Tab , Niv / 198Cefazolin Injection , Niv / 1988Trimetazidine Mr 35 Mg Tab , Niv / 201Multivitamin Syp Of 200 Ml , Niv / 2062Voglibose 0.3Mg Tab , Niv / 2063Mometasone 0.1 % Lotion , Niv / 2070Carbidopa 10Mg + Levodpa 100Mg Tab , Niv / 208Naloxone Hydrochloride 1 Mg / 1 Ml Injection , Niv / 2090Entacapone 25 Mg + Carbidopa 25 Mg + Levodopa 100 Mg , Niv / 21Finasteride 1 Mg Tab , Niv / 2106Glimepride 1Mg + Metformin 500Mg Tab , Niv / 2118Torsemide 5 Mg Tab , Niv / 2132Nitrazepam 5 Mg Tab , Niv / 2133Clonazepam 0.25 Mg Tab , Niv / 214Lactobacillus Containing 100 Million Cells Capsule Duplicate Of 011626 , Niv / 2196Methotrexate 500Mg Inj , Niv / 2221Diethylcarbamazine 100 Mg Tab , Niv / 2223Octreotide 50 Mg Inj , Niv / 2291Des Loratidine 5 Mg Tab , Niv / 2292Fluorouracil5% Cream , Niv / 2294White Soft Paraffin + Light Liquid Paraffin + Aloe Vera Gel Cream , Niv / 2296Calcipotriol 50Mcg + Betamethasone 0.05% Ointment , Niv / 2304Fluconazole 200Mg Tab , Niv / 2324Allopurinol 300Mg Tab , Niv / 2326Febuxostat 80Mg Tab , Niv / 235Clobetasol Propionate 0.05 % + Salicylic Acid 3 % Ointment , Niv / 2367Darifenacin 7.5Mg Tab , Niv / 238Povidine Iodine Ointment 5% , Niv / 242Zinc Gluconate Oral Soln , Niv / 2438Leuprolide Depot 11.25 Mg Inj , Niv / 249Osteocalcium Syp Bottle Of 200 Ml ( 1250Mg Of Calcium Carbonate ) , Niv / 2503Tenectplase Injection 40Mg Per Vial , Niv / 2534Lenalidomide 5Mg Cap , Niv / 2535Lenalidomide 10Mg Cap ( Duplicate Of 010883 ) , Niv / 2556Chlorhexidine Gluconate4% Scurb ( Pvms -011466 ) , Niv / 2558Chlorhexidine Gluconate 20% Scrub Lotion 500 Ml Bott , Niv / 2569Nebivolol 2.5 Mg Tab , Niv / 260Mebeverine 200Mg Tab , Niv / 2604Ropivacaine 0.75%150Mg / 20Ml Inj , Niv / 2605Ursodeoxycholic Acid 300 Mg Tab , Niv / 261Antihistaminic Drops Containing Nephazolene 0.05% And Chloramphenecol 0.5% Drops , Niv / 2638Inj Ertapenem Sodium 1 Gm , Niv / 268Escitalopram 5 Mg Tab , Niv / 2693Pantoprazole 40 Mg + Itopride Hcl 150 Mg Tab , Niv / 275Cyclophosphamide 1Gm Injection , Niv / 2798Mesalazine 1.2 Gm Sr ( 5-Amino Salicylic Acid ) Tab ( Pvms No. 011655 ) , Niv / 301Vitamin Drops , Niv / 304Insulin Aspart Pen Containing 100 U / Ml , Niv / 3057Modafinil 100 Mg Tab , Niv / 3064Desvenlafaxine 50 Mg Tab , Niv / 3164Enterogermina ( Bacillus Clausi Spores Suspension ) , Niv / 3171Carnitine 500Mg / 100Ml Syp , Niv / 3185Methotrexate 25 Mg Inj , Niv / 3188Hypertonic Saline Nasal Solution 10 Ml , Niv / 3245Omegaven 100 Ml / 50Ml Bottle , Niv / 326Dasatinib 70 Mg Tab , Niv / 3377Insulin Glargine 100Iu / Ml Cartridgelantus , Niv / 3394Lycopene Of 5000Mcg+Multivatmin 5Mcg And Multiminerals Cap / Tab , Niv / 3405Minoxidil 5 % + Aminexil 1.5% Lotion , Niv / 348Heparin Sodium 50000 Iu / 100 Gm Ointment, Tube Of 10 Gms , Niv / 3497Brimonidine With Timolol Eye Drops Of 2.5 Ml , Niv / 3617Normal Saline Nasal Drops , Niv / 3672Ecospirin 75Mg + Atorvastatin 10 Mg Tab , Niv / 3688Polymixin B 500000 Iu Inj , Niv / 3700Insulin Human Mixtard 25 / 75 100 Iu / Ml Cart Of 03Ml , Niv / 3701Isosorbide Monotrate 30Mg , Niv / 3704Prosure Powder , Niv / 3723Protein And Nutritional Supplement ( Example Nutrigen / Reropro ) , Niv / 3764Olmisartan 40 Mg Tab , Niv / 377Fluconazole 100Mg Tab , Niv / 3772Rifaximin 400 Mg Tab , Niv / 3775Acenocoumarol 3 Mg Tab , Niv / 3778Leuprolide Depot 22.5 Mg Inj ( Pvms 011060 ) , Niv / 3783Mmr ( Measles, Mumps, Rubells ) , Niv / 3784Quadrivalent Vaccine 0.5 Ml ( Diptheria Toxoid, Pertusis Inactivated Whole Cell, Tetanus Toxoid, Hemophilus Influenza Capsular Polysaccharide ) , Niv / 380Amiodarone 100 Mg Tab , Niv / 3803Rifampicin 300 Mg Tab , Niv / 3825Glutaraldehyde 2% Aqueaous Soln With Activator , Niv / 3845Sildenafil 20Mg Tab , Niv / 3847Cinitapride 1 Mg Tab , Niv / 38511, 6 Dihydroxy, 2-5 Dioxahexane, Glutaraldehyde Benzylakonium Chl, Alkyl Urea Derivative, 11.2Gm / 5.0Gm, 5Gm / 3Gm In 100Gm ( Bacillocid ) , Niv / 391Bisoprolol 2.5 Mg Tab , Niv / 3914Erlotinib Hcl 150Mg , Niv / 3941Levosalbutamol 0.63Mg Of 2.5 Ml Respules , Niv / 3943Levosalbutamol 2Mg , Niv / 3944Levosalbutamol 50Mcg Inh , Niv / 3946Artemether 40 Mg Lumefantrine 240 Mg , Niv / 3953Acetylcysteine 20% W / V 5Ml , Niv / 401Escitalopram 20 Mg Tab , Niv / 4031Betadine Scrub 5% , Niv / 4036Trimetazidine Hydrochloride 37.5 Mg Tab , Niv / 4046Econorm Sachet , Niv / 405Tadalafil 10Mg Tab , Niv / 411Losartan 50 Mg+ Hydrochlorthaizide12.5 Mg Tab , Niv / 4121Etomidate 2 Mg Inj , Niv / 4140Silodosin 4 Mg Cap , Niv / 4169Pyridoxine 10 Mg Tab , Niv / 4180Tocilizumab 80Mg Inj , Niv / 4233Micafungin Sodium 50 Mg Inj , Niv / 4239Naphazoline + Chlorpheniramine + Hpmc Eye Drop , Niv / 4240Hypermellose 0.3% + Glycerine 0.2% + Dextran 0.4% Eye Drop , Niv / 4271Perfinedone 200 Mg Tab , Niv / 4303Methoxy Polyethylene Glycol-Epoetin Beta 50 Mcg Pfs ( Pvms 011904 ) , Niv / 4328Human Chorionic Gonadotrophin 10000 Iu , Niv / 4334Sevelimer 800Mg Tab , Niv / 436Modafinil 200 Mg Tab , Niv / 437Ppp-Cefixime 200Mg Cap , Niv / 4473Humalog Mix , Niv / 452Mefenamic Acid 500 Mg + Dicyclomine 20 Mg Tab , Niv / 4520Deferasirox 500 Mg Tab , Niv / 4541Valsartan 80 Mg Tab , Niv / 4547Tab Hyoscine Bromide 10Mg , Niv / 4582Colistin 1 Million Iu Inj , Niv / 4585Paclitaxel 260 Mg Inj , Niv / 460Verapamil Hydrochloride 40 Mg Tab , Niv / 4601Fosaprepitant 150 Mg Inj , Niv / 4610Paracetamol 500 Mg + Aceclofenac 100 Mg Tab , Niv / 463Amitryptilline 25 Mg Tab ( New 010626 ) , Niv / 4634Cinacalcet Tab 30 Mg , Niv / 4638Pneumococcal Vaccine13 Vallent Conjugeted , Niv / 4657Benzydamine Mouthwash 0.15% , Niv / 4707Octreotide Depot 20 Mg Inj , Niv / 478Primrose Evening Oil 500Mg , Niv / 4786Brinzolomide Opthalmic Suspension 1.0% Eye Drop , Niv / 4787Bss Plus Glass Bottle For Intra Ocular Use , Niv / 4792Olopatadine Hydrochloride Opthalmic Solutiion 0.2% W / V , Niv / 4882Everolimus 5 Mg , Niv / 4900Buprenorphine Patch 10 Mcg , Niv / 492Gabapentin 100 Mg Tab , Niv / 493Ethinylestradiol 0.025 Mg + Levonorgestrel 0.1 Mg Tab , Niv / 5016Urea 10%, Glycerin 10%, Cyclomethicone 1%, Allantoin 0.5%, Menthol 0.5%, White Petroleum Jelly 5% Cream , Niv / 5021Adapalene0.1%W / W+Benzoyl Peroxide 2.5% W / W Gel ( 15 Gm ) , Niv / 5034Cream Lulicanazole 1% ( 10 Gm ) , Niv / 5066Omeprazole 20 Mg + Domperidone 10 Mg Tab , Niv / 5091Protein Powder ( Sugar Free ) For Diabetic Patients 400Gm , Niv / 5092Ensure Enteral Feeding Powder , Niv / 5097Rifampicin 150 Mg + Isoniazide 100 Mg + Ethambutol 275-500 Mg + Pyrazinamide 400 Mg Tab , Niv / 5113Ppp-Ciprofloxacin 500 Mg Tab , Niv / 5176Picc Central Line Catheter Set Size 26 G , Niv / 5204Saccharomyces Boulardii 282.5 Mg Lyophilied Tablet , Niv / 5219Urokinase 5000 Unit + Diluent Inj , Niv / 5278Valganocyclovir 500 Mg Tab , Niv / 5286Atenolol 50 Mg + Hydrochlorthiazide 12.5 Mg Tab , Niv / 5330Dologel , Niv / 5341Ambrisentan 5 Mg Tab , Niv / 5395Ribavarin 100Mg Cap , Niv / 5405Lurasidone 40 Mg Tab , Niv / 5410Paliperidone 100 Mg Inj , Niv / 5429Plasmolyte - A Ph 7.4, Multiple Electrolytes Type 1, Usp 500 Ml Inj , Niv / 5458Zinc Acetate Tab , Niv / 5474Linagliptin 2.5Mg + Metformin 850Mg , Niv / 5612Montelukast 10Mg+Fexofenadine 120Mg , Niv / 563Glutamine Injectable ( Dipeptiven ) Vial Of 100 Ml , Niv / 565Amitryptilline 10Mg Tab , Niv / 566Lamotrigine 100 Mg Tab , Niv / 5827Crizotinib 250 Mg Cap , Niv / 5877Ppp-Ciprofloxacin 500 Mg + Tinidazole 600 Mg Tab , Niv / 5884Inj Torsemide 10Mg , Niv / 592Dextrose 10% Injection Bott Of 500Ml , Niv / 596Simvastatin 10Mg Tablet , Niv / 611Sildenafil 25Mg Tab , Niv / 612Pantaprazole 20Mg Tab , Niv / 632Amoxycillin 250Mg + Clavulonic Acid 125Mg Cap , Niv / 636Levodopa + Carbidopa 250Mg Tab , Niv / 6389Sodium Chondroitoin Sulphate 30 Mg + Sodium Hyaluronatu 40 Mg In 0.75 Ml Pfs ( Viscoat ) , Niv / 6426Rabeprazole 20 Mg + Domperidone Sr 30 Mg , Niv / 644Silymarin 140Mg Tab , Niv / 6445Tab Calcium Acetate 667 Mg , Niv / 6451Pac- Inj Panitumumab 100Mg / 5Ml Vial , Niv / 6456Inj Eribulin Mesylate , Niv / 6464Dietary Protein Supplement For Respiratory Disease ( Pulmofit ) , Niv / 6470Inj Golimumab 50Mg Pfs Of 0.5 Ml ( Pvms No. 014901 ) , Niv / 6472Mecobalamine Tab , Niv / 660Topiramate 100 Mg Tab , Niv / 662Povidone Iodine 7.5 Percent Surgiscrab , Niv / 6663Inactivated Polio Vaccine Inj , Niv / 6672Vit D3 Drops 400 Unit / Ml , Niv / 672Citalopram 10 Mg , Niv / 673Gliclazide 80Mg Tab , Niv / 6767Chlorhexidiene 4 % Solution In 100 Ml Packs , Niv / 6833Primorelin 11.25 Mg Inj , Niv / 6845Pac- Axitinib 1 Mg Tab , Niv / 6888Tegafur 100Mg + Uracil 224Mg Cap , Niv / 6943Pac- Tab Afatinib 30 Mg , Niv / 6944Iron Sucrose 100 Mg, Inj , Niv / 6966Iron Isomaltoside 5Ml Vial ( 1Mg Containing 100Mg Iron Isomaltoside ) , Niv / 6971Injection Secukinumab 150Mg / 1 Ml ( Powder ) Injection , Niv / 705Aminovine Infant 10% ( 100 Ml Bottle ) , Niv / 7066Tab Tenofovir 300 Mg + Emtricitabine 200 Mg + Efavirenz 600 Mg , Niv / 7068Inj Gemcitabine 1.4 Gm , Niv / 7071Pvc Free And Dhp Free Normal Saline 1000 Ml , Niv / 7073Inj Doxycycline 100 Mg , Niv / 7082Pac- Trastuzumab Emtansine 100Mg Inj , Niv / 710Pneumococcal Polysaccharide Vaccine23 Valent 0.5 Mg , Niv / 7105Salicylic Acid 3% Andbenzoic Acid 6 % Ointment , Niv / 7106Cis-Atracurium Besylate Inj 2 Mg / 1Ml- 5 Ml Amp , Niv / 711Calcium + Vitamin + Folicacid Tablets , Niv / 713Glutamine Sachets 15 G / 10 G , Niv / 7131Eylea ( Aflibercept Solution For Injection ) ( Pvms No. 012043 ) , Niv / 716Budesonide 200 Mcg+Formeterol 06 Mcg Inhaler , Niv / 7191Cap Palbociclib 125Mg , Niv / 7197Electrolyte Solution For Sterigen ( Pack Of 20L ) , Niv / 7199Intralipid Infant 20% , Niv / 7224Inj Nano Liposomal Docetaxel Vial Of 80 Mg ( Pvms 011061 ) , Niv / 7244Ranitidine 75 Mg / 5Ml Syp , Niv / 7264Pac- Inj Polymer Bound Nano Particle Paclitaxel 100Mg , Niv / 7333Ambulatory Glucose Monitoring System , Niv / 7349Cap Nintedanib 100 Mg , Niv / 735Lamivudine 100Mg Tab , Niv / 7350Cap Nintedanib 150 Mg , Niv / 7426Moxifloxacin+Dexamethasone Eye Drops ( Vigadexa ) , Niv / 7428Ofloxacin+Betamethasone Eye Ointment , Niv / 7429Ologen Collagen Matrix , Niv / 7434Cap Lenvatinib 10Mg , Niv / 7435Cap Lenvatinib 4Mg , Niv / 7534Hyaluronic Acid0.3% + Rhealba Oat 3% Cream ( Tube Of 35 Gm ) , Niv / 7535Retinol 0.1% With Liposomal Encapsulation+Hyaluronic Acid Cream ( Tube Of 30 Mg ) , Niv / 7537Eberconazole 1% Cream ( Tube Of 30Gm , Niv / 7558Inj Iohexol 350Mg / Ml 200 Ml Vial , Niv / 7709Ensure Plus , Niv / 7712Tab Brivaracetam 50 Mg , Niv / 7713Tab Ribociclib 200 Mg , Niv / 7714Nitrophage Forte Sachet , Niv / 7759Inj Romiplastim 250 Mg , Niv / 7789Diclofenac Diethylamine Bp2.32%+Methyl Salicylate Ip10%+Mentholip5%And Absolute Alcohol 10%In Topical Solution ( New Pvms 010265 ) , Niv / 7796Inj Evolocumab 140 Mg / Ml , Niv / 781Donepezil 10 Mgtab , Niv / 7843Cap Netupitant 300Mg+Palonosetron 0.5 Mg , Niv / 787Clotrimazol Vaginal Cream / Gel , Niv / 790Citric Acid ( For Nephro ) Kg , Niv / 7988Chlorhexidine Spray For Skin Disinfection , Niv / 8054Tab Olaparib 150 Mg , Niv / 80572:1:1 Of Branched Chain Amino Acid L-Leucine, L-Valine, L-Isoleucine , Niv / 836Tolterodine 1Mg , Niv / 837Human Insulin 30% Rapid Acting + Human Insulin 70% Intermediate , Niv / 888Tranexamic Acid 500 Mg + Mefenamic Acid 250 Mg , Niv / 890Aripiperazole 15 Mg , Niv / 92Atomoxetine 18Mg , Niv / 9204Acarbose 25 Mg Tab ( Old Pvms 011761 ) , Niv / 9232Tabceretinib150 Mg , Niv / 9233Inj Transstuzumab150 Mg , Niv / 9244Infovac Canister 500 Ml With Gel , Niv / 9245Canister 300 Ml With Gel , Niv / 9295Tab Melatonin 3 Mg , Niv / 9297Inj Zuclopenthixol Deconate 200 Mg , Niv / 9328Cap Dabrafenib 50 Mg , Niv / 9329Tab Trametinib 0.5 Mg , Niv / 9330Tab Lorlatinib 25 Mg , Niv / 9332Inj Bevacizumab 300 Mg , Niv / 9339Tab Eldicet ( Pinaverium Bromide 50 Mg ) , Niv / 948Risperidone 3 Mg Tab , Niv / 949Latanoprost 0.05% Eye Drop , Niv / 9495Liposomal Amphotericin Bin Saline Suspension 50 Mg / 50 Ml ( Bottle Of 50 Ml ) , Niv / 95Citicholine 500Mg Tab , Niv / 9599Transparent Peripheral Iv High Secural Dressing ( Size- 6X7 Cm ) , Niv / 96Rocuronium Bromide 50 Mg Inj In 5 Ml , Niv / 985Feropenem 200 Mg Tab , Niv / 99Divalproex Sodium Delayed Release Tab 250Mg , Niv / 996Nitroglycerine 2.6 Mg Tab , Niv / 999Olanzapine 2.5Mg Tab , Niv / Onco / 4348Inj Rasburicase 1.5Mg , 012683Tab Oxybutynin 2.5 Mg , Niv / 9435Permethrin 1% Cream Tube Of 120 Gm , 010743Fentanyl 50 Mcg Transdermal
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 34
46.
Housing Urban and Rular Development #10332311 Price Bid
Tender For Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M (One Point Five Metre ) In Width Or 10 Sqm ( Ten Square Metre ) On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, (One Point Five Metre ) Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan),Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Gettingout The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed With In Any Lead .Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundationsetc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Up To Any Leadwithin Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4(One Cement : Two Coarse Sand): Four Graded Stone Aggregate 40 Mm ( Forty Millimetre ) Nominal Size) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying In Position Cement Concrete Of Specified Grade In Parapets Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4(One Cement : Two Coarse Sand): Four Graded Stone Aggregate 40 Mm ( Forty Millimetre ) Nominal Size) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (One Cement : Four Coarse Sand): Eight Graded Stone Aggregate 40 Mm ( Forty Millimetre ) Nominal Size) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , A) Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , D) Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Steel Work In Built Up Section Trusses And Framed Work Including Hosting Fixing In Position And Applying A Priming Coat Of Red Lead Paint As Per Direction Of Engineer-In-Charge.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Applying Priming Coat: With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Supplying At Site Angle Iron Post & Strut Of Required Size Including Bottom To Be Split And Bent At Right Angle In Opposite Direction For 10 Cm Length And Drilling Holes Upto 10 Mm Dia. Etc. Complete. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing G.I. Chain Link Fabric Fencing Of Required Width In Mesh Size 50X50 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete As Per The Direction Of Engineer-In-Charge. Made Of G.I. Wire Of Dia 4 Mm, Pvc Coated To Achieve Outer Dia Not Less Than 5 Mm In Required Colour And Shade.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Portable Barricades , Supply Of Portable Steel Fabricated Barricade Stand Metal Barricade Stand Manufacturer And Dealers Specification: Size: 1800Mmlx1200mmcolour: Yellow Number Of Wheels: 4 Numbers (75Mm Dia) Pipe Dia: 40Mm Pipe Gauge: 16 Gauge Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Boom Barrier & Tyre Killer , Supply Installation Testing & Commissioning Of Boom Barrier Of 4 Mtr. Length Of Boom Arms. Galvanised And Ral Painted With Buil In Control Panel With Intensive Use. Manual Open / Close Buttons And Automatic Closing Ir Device Complete With Ground Loop Detection Board (For Entrance And Exit To The Main Building),100% Duty Cycle.High Intensive Use Dc Barrier. 180-200Nm Operating Torque For. 2 Sec Open/Close Time . Motor Current Draw : 12A. Max Motor Power: 300W.Max Opening : 90 Degree.Ip54. Inter-Changeable Barrier( Left To Right And Vice Versa). Ampereomatic Feature For High Safety In Case Of Failure Of Safety Device. Complete As Required As Per Given Technical Specification.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Supply Installation Testing & Commissioning Of Portable Spike Barieer Tyre /Killer Suitable To Work On Manual Operation .The Main Frame Is Made Of 6Mm Thick Flat Aluminum Strip Which Made It Corrosion Resistant,Strong And Light In Weight For Easy Portability & Long Durability. Other Details Are As Below, A. Portable Tyre Killer - 4 Mtr. B. Edge Of Spike - 10Mm,C. Height Of Spike - 60Mm,D. No. Of Spikes - 85 Nos.E. Total Weight : 7 Kg. (Approx.)F. No. Of Wheels In Packing Box - Two Etc.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix Providing M-25 Grade Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, Including Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-In-Charge. Note :- (Note:- Cement Content Considered In M-25 Is @ 330 Kg/Cum) All Works Upto Plinth Level , All Works Upto Plinth Level , All Works Above Plinth Level Upto Floor V Level , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Including Cost Of Binding Wire Upto Plinth Level As Per The Directions Of Engineer-In-Charge Including Carriage Of Materials With In All Leads, Lifts And Other Incidentals . Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Structural Steel Work Riveted ,Bolted Or Welded In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights :Columns, Pillars, Piers, Abutments, Posts And Struts Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand) : 3 Graded Stone Aggregate 20 Mm Nominal Size). Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In :Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Painting Two Or More Coats On Brick Wall/Rcc Wall/ Masonary Wall At All Locations Prepared And Applied As Per Manufacturers Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete. On Steel Work Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Colour Coated Galvalume Trapezoidal Profiled Sheeting Of 0.50Mm Thickness Tolerance +/-5% Total Coated Thickness Tct Of Material 550 Mpa For Roofing/ Cladding Application. The Trapezoidal Profiled Sheet Shall Be 28-32 Mm In Crest Height With 2 Stiffener Ribs With Subtle Square Fluting In The Six Pans At Nominal 200 Mm Centre- To-Centre. The End Crest Shall Be Designed For Anti - Capillary Action , To Avoid Any Seepage Of Water Through The Lateral Overlap. The Profile Shall Have Return Leg For Proper Side Lap. Coating Specification: Primer Coat: 5-7 Microns Epoxy Primer On Both Side Of Sheet. Top Coat: Polyester Top Coat 15 -18 Microns. Color: As Approved By Engineer-In-Charge Tolerances: As Per Is Standards: Is: 15961, Is: 513, Is: 14264. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Same As Above But For Ridges Plain (500 - 600Mm) , Same As Above But For Gutter .(600 Mm Over All Girth) , Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications :Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/10 Sqm Of Approved Brand And Manufacture Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Preparation And Consolidation Of Subgrade With Power Road Roller Of 8 To 12 Tonne Capacity After Excavating Earth To An Average Of 22.5 Cm Depth , Dressing To Camber And Consolidating With Road Roller Including Making Good The Undulations Etc. And Re-Rolling The Subgrade And Disposal Of Surplus Earth With Lead Upto 50 Metres.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Dry Stone Pitching 22.5 Cm Thick Including Supply Of Stones And Preparing Surface Complete.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Applying Prime Coat Using Bitumen Emulsion Conforming To Is: 8887, Using Emulsion Pressure Distributer Including Preparing The Surface & Cleaning With Mechanical Broom. With Medium Setting Bitumen Emulsion On W.B.M / W.M.M. @ 0.4Kg/Sqm Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Applying Tack Coat Using Bitumen Emulsion Conforming To Is: 8887, Using Emulsion Pressure Distributer Including Preparing The Surface & Cleaning With Mechanical Broom. With Medium Setting Bitumen Emulsion On Bituminous Surface @ 0.25Kg/Sqm Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Painting Runway/Taxi Track/Apron Marking With Adequate Nos Of Coats To Give Uniform Finish With Road Marking Paint Of Superior Make As Approved By The Engineer-Incharge, I/C Cleaning The Surface Of Oil , Dirt , Scales , Oil , Grease And Other Foreign Mater;Al Etc. And Lining Out Complete. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Painting Road Surface Marking With Adequate Nos Of Coats To Give Uniform Finish With Ready Mixed Road Marking Paint Conforming To Is : 164, On Bituminous Surface In White/Yellow Shade, Including Cleaning The Surface Of All Dirt, Scales, Oil, Grease And Foreign Material Etc. Complete. New Work (Two Or More Coats) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying Dense Graded Bituminous Macadam Using Crushed Stone Aggregates Of Specified Grading, Premixed With Bituminous Binder And Filler, Transporting The Hot Mix To Work Site By Tippers, Laying With Paver Finisher Equiped With Electronic Sensor To The Required Grade, Level And Alignment And Rolling With Smooth Wheeled, Vibratory And Tandem Rollers As Per Specifications To Achieve The Desired Compaction And Density, Complete As Per Specificatons And Directions Of Engineer-In-Charge. 50 To 100 Mm Average Compacted Thickness With Bitumen Of Grade Vg-30 @ 5% (Percentage By Weight Of Total Mix) And Lime Filler @ 2% (Percentage By Weight Of Aggregate) Prepared In Batch Type Hot Mix Plant Of 100-120 Tph Capacity.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying Bituminous Concrete Using Crushed Stone Aggregates Of Specified Grading, Premixed With Bituminous Binder And Filler, Transporting The Hot Mix To Work Site By Tippers, Laying With Paver Finisher Equiped With Electronic Sensor To The Required Grade, Level And Alignment And Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction And Density As Per Specification, Complete And As Per Directions Of Engineer-In-Charge. 40/50 Mm Compacted Thickness With Bitumen Of Grade Vg-30 @ 5.5% (Percentage By Weight Of Total Mix) And Lime Filler @ 3% (Percentage By Weight Of Aggregate) Prepared In Batch Type Hot Mix Plant Of 100-120 Tph Capacity.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying 60Mm Thick Faciory Made Cement Concrete Interlocking Paver Block Of M -30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size,Design & Shape, Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Line Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing, Laying, Spreading And Compacting Graded Stone Aggregate (Size Range 53 Mm To 0.075 Mm ) To Wet Mix Macadam (Wmm) Specification Including Premixing The Material With Water At Omc In For All Leads & Lifts, Laying In Uniform Layers With Mechanical Paverfinisher In Sub- Base / Base Course On Well Prepared Surface And Compacting With Vibratory Roller Of 8 To 10 Tonne Capacity To Achievethe Desired Density, Complete As Per Specifications And Directions Of Engineer-In-Charge.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M. All Kinds Of Soil. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M. All Kinds Of Soil.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. All Kinds Of Soilwithin Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth , Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. , Extra For Every Additional Lift Of 1.5 M Or Part Thereof In Excavation / Banking Excavated Or Stacked Materials. All Kinds Of Soil Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Prepainted Sandwich Puffed Roofing With Top Skin Of 0.60 Mm Thick Prepainted Steel Sheet Over Steel Trusses Made Of Cold Rolled Steel Coil With Epoxy Coating Of 25 Micron Having A Puff Depth Of 50 Mm Rock Wool And Wt. Of Puff 35 To 37 Kg Per Cum. And Interior Skin Of 0.50 Mm Prepainted Steel Sheet Steel Frames Are To Be Painted Of Approved Shade I/C Fixing With Self Drilling And Self Tapping Galvanizedoz Or Zinc Alloy Coated Fasteners Of Sizes 5.5 Mm Dia And 55 Mm Long With Epdm Seal , Wahsers Complete With All Accessories As Required And As Per The Specification And Direction Of Engineer - In - Charge Including Carriage Of Materials With In All Lead And Lift And Other Incidentals . Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I. Limpet And Bitumen Washers Complete. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² , Providing And Fixing 15Cm Wide ,45 Cm Over All Semi-Circular Plain G.S.Sheet Gutter With Iron Brackets 40X3 Mm Size , Bolts ,Nuts And Washers Etc., Including Making Necessary Connections With Rain Water Pipes Complete. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/M² Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Finishing With Epoxy Paint (Two Or More Coats )At All Locations Prepared And Applied As Per Manufacturers Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete.On Steel Work Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Supplying And Stacking At Site. Good Earth Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified. Chlorpyriphos/ Lindane Emulsifiable Concentrate Of 20% Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Making Plinth Protection With Local Stone / Slate Embedded In 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone - Iii) : 6 Graded Stone Aggregate 20 Mm Nominal Size) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1Cement : 2 Coarse Sand): 4 Graded Stone Aggregate 12.5Mm Nominal Size) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7 Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With A Piece Of Clothlightly Soaked In Kerosene Oil. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Extra For Providing And Mixing Waterproofing Material In Cement Concrete Work In Doses By Weight Of Cement As Per Manufacturers Specification. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing 18 Mm Thick Gang Saw Cut,Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills,Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment,Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc .Complete At All Levels:Granite Of Any Colour And Shade Area Of Slab Upto 0.50 Sqm Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing Edge Moulding To 18 Mm Thick Marble Stone Counters, Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is:2202 (Part I) Non-Decorative Type , Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters:35 Mm Thick Including Isi Marked Stainless Steel But Thinges With Necessary Screws Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Aluminium Sliding Door Bolts Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade With Nuts And Screws Etc. Complete. 300X16 Mm Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Aluminium Tower Bolts Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc. Complete: 300X10 Mm Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125 Mm Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac10 As Per Is: 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete. Twin Rubber Stopper Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Bright Finished 100 Mm Mortice Lock With 6 Levers Without Pair Of Handles Of Approved Quality For Aluminium Door, With Necessary Screws Etc Complete As Per Direction Of Engineer- In-Charge. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing & Fixing Decorative High Pressure Laminated Sheet Of Plain / Wood Grain In Gloss / Matt/ Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is : 2046 Type S, Including Cost Of Adhesive Of Approved Quality.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters (Over All Area Of Door Shutter To Be Measured).Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi , Is:3564 ,Embossed On The Body,Door Weight Upto 36 Kg To80 Kg And Door Width From 701 Mm To1000 Mm),With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Structural Steel Work Riveted ,Bolted Or Welded In Built Up Sections , Trusses And Framed Work, Including Cutting , Hoisting , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete.Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Carbon Steel Galvanised (Minimum Coating 5 Micron) Dash Fastener Of 10 Mm Dia Double Threaded 6.8 Grade (Yield Strength 480N/Mm2), Counter Sunk Head, Comprising Of 10Mdia Polyamide Pa6 Grade Sleeve, Including Drilling Of Hole In Frame , Concrete/Masonry, Etc. As Per Direction Of Engineer-In-Charge Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Kota Stone Slab Flooring Over 20Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1:4(1 Cement : 4 Coarse Sand) : 25 Mm Thick Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Kota Stone Slabs 20Mm Thick In Risers Of Steps , Skirting ,Dado And Pillars Laid On 12Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand ) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. Two Coats Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , 12 Mm Cement Plaster To Ceiling In Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) As Per The Directions Of Engineer-In-Charge Including Carriage Of Materials Within All Leads, Lifts And Other Ncidentals.1:6 (1 Cement: 6 Coarse Sand) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , 20 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Finishing Walls With Textured Exterior Paint Of Required Shade : New Work(Two Orn More Coats Applied @ 3.28 Ltr/10Sqm) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg/10 Sqm Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Finishing With Epoxy Paint (Two Or More Coats )At All Locations Prepared And Applied As Per Manufacturers Specifications Including Appropriate Priming Coat, Preparation Of Surface, Etc. Complete.On Steel Workwithin Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , Providing And Fixing Double Glazed Hermetically Sealed Glazing In Aluminium Windows, Ventilators And Partition Etc. With 6 Mm Thick Clear Float Glass Both Side, Having 12 Mm Air Gap, Including Providing Epdm Gasket, Perforated Aluminium Spacers, Desiccants, Sealant (Both Primary And Secondary Sealant) Etc. As Per Specifications, Drawings And Direction Of Engineer-In-Charge Complete. , Filling The Gap In Between Aluminium Frame & Adjacent Reinforced Cement Concrete / Brick / Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete. Upto 5Mm Depth And 5 Mm Width Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights : Suspended Floors, Roofs, Landings, Balconies And Access Platform Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights :Edges Of Slabs And Breaks In Floors And Walls: Under 20Cm Wide. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying Integral Cement Based Treatment For Water Proofing On Horizontal Surface At All Depth Below Ground Level For Under Ground Structures As Directed By Engineer-In-Charge And Consisting Of : (I) Ist Layer Of 22 Mm To 25 Mm Thick Approved And Specified Rough Stone Slabover A 25 Mm Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Mixed With Water Proofing Compound Conforming To Is:2645 In The Recommended Proportion Over The Leveling Course (Leveling Course To Be Paid Separately). Joints Sealed And Grouted With Cement Slurry Mixed With Water Proofing Compound. (Ii) 2Nd Layer Of 25 Mm Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Mixed With Water Proofing Compound In Recommended Proportions. (Iii) Finishing Top With Stone Aggregate Of 10 Mm To 12 Mm Nominal Sizespreading @ 8 Cudm/Sqm Thoroughly Embedded In The 2Nd Layer. Using Rough Kota Stone. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Laying Integral Cement Based Treatment For Waterproofing On The Vertical Surface By Fixing Specified Stone Slab 22 Mm To 25 Mm Thick With Cement Slurry Mixed With Water Proofing Compound Conforming To Is:2645 In Recommended Proportions With A Gap Of 20 Mm (Minimum) Between Stone Slabs And The Receiving Surfaces And Filling The Gaps With Neat Cement Slurry Mixed With Waterproofing Compound And Finishing The Exterior Of Stone Slab With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) 20 Mm Thick With Neat Cement Punning Mixed With Waterproofing Compound In Recommended Proportion Complete At All Levels And As Directed By Engineer-In-Charge : Using Rough Kota Stone Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honeycomb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter , 1.8 M Long Complete As Per Standard Design.With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Providing And Placing In Position Suitable Pvcwater Stops Conforming To Is:12200 For Construction / Expansion Joints Between Two Reinforced Cement Concrete Members And Fixed To The Reinforcement With Binding Wire Before Pouring Concrete Etc. Complete : Dumb Bell With Central Bulb (180 Mm Wide, 8 Mm Thick) Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst. , Construction Of Pre-Fabricated Cabin Size (12.00X5.00X5.00)Mtr Roof Hut Shape As Per Dreawing.Specifications:- A) Outer Wall 50Mm Thick Wall Puf Insulated Panel.B) Roof Panel (30/70)Mm Thick Puf Panelc) Door And Window (As Per Drawing) Upvc.D) Ppgi Flashings (U-Channel & Corners).E) Hardware & Accessories.F) Erection Of Wall And Roof Panel.G) Tile Flooringh)Pvc Ceilingincluding All Civil Work Required I.E Foundation, Footing, Plinth Beam Etc, Office, Toilets,Electrical Work ,Hvac,Fire Fighting,Plumbing & Sanitation,Earthing,Over Head Tank 5,000 Ltr, Septic Tank Etc As All Required Work Completed Including Carriage Of Material In All Leads And Lifts As Per The Direction Of Engineer-In-Charge. Within Any Lead .Ithin All Leads And Lift Including Carriage Of Materials And As Per Direction Of Engineer-In- Charge. The Rate Is Including Octroi, Royality, Malkana, Toll Tax, Or Any Other Taxes Imposed By The Government Excluding Gst.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Himachal Pradesh View Result →
47.
Tourism #10317833 Price Bid
Smriti Van At Chabisay Seyok Under Forest Department,Gta. - Boundary Fence ( L = 595.00 m): Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .a) Depth exceeding 1.50m 2 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 3 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge. 4 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. 5 Cost of Boulder 150 mm size delivered and stacked at site 6 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety 7 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 8 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. i) Tor/ mild steel ( other manufacture nat specified) 9 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 10 M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with IS: 816- 1956 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 1957, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m 11 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.with (4:1) cement motera) 20 mm thick 12 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(b) On steel or other metal surface : 13 Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised C clips to grid of horizontal strands of galvanised high tensile spring steel wire of fixed to the vertical posts by means ofgalvanised special clips, bolts and nuts etc.(I) 50 mm. x 50 mm. x 8 g. 14 Footpath (L= 565.00 m Width-1.50m)Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.a) Depth exceeding 1.50m 15 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 16 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 17 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (a) Single brick flat soling (thickness 75 mm.) 18 Cost of Boulder 150 mm size delivered and stacked at site 19 Filling in Foundation or Plinth with Silver Sand in layers not exceeding 150mm as directed and consolidating the same by thorough saturation with water ramming complete including the cost of supply of sand 20 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes ii ) River bazree (1:1.5:3) 21 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 22 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 23 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 24 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 25 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 26 Observatory Tower (G+2 Storied) Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. a) Depth exceeding 1.50m 27 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 28 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres. a) Depth exceeding 1.50m foundation filling 1/3 of ….. 29 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 30 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (a) Single brick flat soling (thickness 75 mm.) 31 Cost of Boulder 150 mm size delivered and stacked at site 32 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety 33 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 34 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 35 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 36 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. a) In road and jhora work 37 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .25 to 30 mm thick shuttering 38 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 39 (d) Extra for works beyond the roof of ground floor per additional floor(i) upto 4th (per floor) and in basement. 40 second floor/ second basement 41 Third Floor 42 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) conencted to one another with bracket gusset cleats as per design, direction of Engineer-in-charge complete ihncluding cuting to requisite size fabrication with necessary metal are welding conforming to IS 816-1956 & IS 9595 using electrodes of apporved make and brand conforming to IS 814-1957 haulage, hoisting and erection all complete.The rate includes the cost of rolled steel section, confumables such as the cost of gas and hirea charges of all tools and plants and labour required for the works incouding all incidental charges such as electricity charges labour insurance charges etc. i) For trusses spanning u p to 12.00 mSquare tube 50x50x4.5 mm th = 5.95 kg/m 43 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 44 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 45 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement moter, 15 mm thick 46 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 47 Supplying fitting and fixing 1st quality cremic tiles in wall and floors to match with the existing workmaterials(WALL)(b) Area of each tile above 0.09 Sq.m(i) Coloured or decorative 48 Supplying fitting and fixing 1st quality cremic tiles in wall and floors to match with the existing workmaterials(FLOOR)(b) Area of each tile above 0.09 Sq.m(i) Coloured or decorative 49 Supplying and laying true to line and level vitrified tiles of approved brand(size not less than 600mmx600mmx10mm thk) in floor, skirting etc. set in 20mm sand cement mortar(1:4) and 2mm thk cement slurry back side of tiles using cement @ 2.91kg/m2 or using polymerised adhesive(6mm thk layer applied directly over finished artificial stone floor/mosiac etc without any backing course) laid after application slurry using 1.75kg of cement per m2 below mortar only, joints grouted with admixture of white cemet and colouring pigment to match with colour of tiles/epoxy groutmaterials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete true to materials, labour and all other incidential charges complete true to manufacturers specification and direction of Engineer-In-Charge.(White cement, synthetic adhesive and grout materials to be supplied by the contractor) I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. 50 Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohrs hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N(A) Deep Colour & White 51 Wood work in door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of the framef) sissu, gammar, champ 52 Panel shutters with both side raised panels of doors and windows as per design (each panel consisting of a single plank without joint), including fitting and fixing the same in position but excluding the cost of hinges and other fittings. (f) sissu, gammar, champ 53 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 54 Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. 55 M.S. clamps for fixing doors & windows framesmade of flatbent bar, end bifurcated, fixedin cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction.b) 40mmx6mm above 250 mm 56 Iron butt hinge of approved quality fitted and fixed with steel screws with I S I mark100 mm x 75 mm x 3.5 mm 57 Anodised aluminium Aldrop/ Sliding of approved quality manufactured from extruded section conforming to I.S: specificatiion (I.S. 2681/66) fitted and fixed complete.(i) 250mm x 16mm dia 58 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated(iv)150mm long x 10 mm dia rod 59 Anodized aluminium D type handleof approved quality manufactured from extruded section confirming the I.S.230/72fitted & fixed complete. 150mm grip x 12 mm dia rod 60 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M] 61 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M] 3 track 62 Labour charge for fabricating and installation of composite door window, partition made from annodised extruded alloy sections for the following units: (A)Glazed aluminium windows ,made of extruded and anodised alloy aluminium sectn fabrications ,including cutting to proper shape and size , drilling and alinging of window and shutter frame fitted with a built locking arrangements, sliding rollers and other necessary fittngs, fixture, adhesives and joineries along with neooprene or EPDM gasketing inbetween window frame and masonry work( walls columns window, lintels etc) as well as between stars and shutters frame and fixing glass & Polysulphate Sealant and inbetween shutter and window frame where necessary including cutting to requisite size and fixing the glass as per drawing, specification and direction of Engineer-in-Charge. The rate includes the hire charges of all tools and plants ,including all incidential charges , adhesive,joineries such as screws cleats angles etc. but excludes the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, locking arrangements and rollers. 3 track sliding window 63 Supplying bubble free float glass of approved make and brand. Confirming to IS 2835-1987. (ix) 5mm thick coloured/ tinted/ smoke glass . 64 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooR Grills above 10 kg/m2 to 16 kg/m2 65 Lime punning about 3 mm thick with stone lime and shell lime 66 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 67 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIc(b) Two Coats 68 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 69 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 70 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On timber or plastered surface : 71 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On Steel surface : 72 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber or plastered surface :a. iv. 2 coat any shad 73 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber Steel surface :a. iv. 2 coat any shad 74 Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:(ii) 100mm Dia 75 D) shoe:(ii) 110mm Dia 76 SANITARY & PLUMBING:Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)Work above ground.32 mm 77 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)15 mm (b) For CONCEALED wORK 78 upply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure) (Dia)75mm 79 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).32 mm 80 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).15 mm 81 Supplying, fitting and fixing bib cock or stop cock. (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). 82 Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body 83 Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 84 (f) hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall 85 Supplying, fitting fixing pillar cock of approved makec) CP Pillar Cock - 15 mm. (Code No. 5011 & Model - FLORENTINE of JAQUAR 86 e ) CP Centre hole basin mixture with regular spout without popup waste system with 450mm long braided hoses( Equivalent to Code No. 5167(B) & Model - FLORENTINE OF JAQUAR or similar brand 87 Supplying P.V.C. water storage tank of approved make quality with closed top with lidUPTO 1000 Ltr. 88 Wash basin wite vitrous china of approved make ( without fittings) supplied, fitted and fixed in position on 75 mm x 75mm x 75mm wood blocks and cast iron brackets including two coat of painting oa C. I bracket (i) 450 x 300mm size 89 Supplying fitting fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.With S Trap 90 Supplying fitting fixing Closet seat of approved make with lid and CP hinges , rubber buffer and brass screwscompletea) EWCiv) Bestolite (solid type ) white 91 Supplying fitting and fixing C.I or P or S trap comforming to I.S 3989/1970 and 1729/1964 including painting the exposed surface.P trap (100 mm dia) 92 Supplying, fitting fixing soap holder.c.(a) PTMT(Prayag or equivalent) 93 Supplying fitting and fixing 10 litres porcelain low down crysteen of approved make with either side or bottom inlet,sideoverflow, brackets complete with all internal PVC fittings. 94 Supplying fitting and fixing porcelain toilet paper holder of approved make and size.Roll type size ( 175mm x 150mm) 95 Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass (i) 25 mm dia. and 450 mm long 96 Supplying fitting fixing best quality Indian make mirror 5.5 mm thick with Silvering as per ISI specification supported on fibre glass frame of any colour, frame size 550 mmx400mm 97 Supplying fitting and fixing in position C.I manhole/ pit cover with rim.(b) Square = (i) 450 mm X 450 mm X 16 kg (approx.) 98 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 99 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Lengthb) 110 mm 100 fittingsplain teeb) 110 mm 101 Bend 45 degreeb) 110 mm 102 xi) Door Bend (T.S.) b) 110 mm 103 xvi) Pipe Clipb) 110 mm 104 xv) Vent Cowlb) 110 mm 105 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.Work above groundb) 110 mm 106 Construction of inspection pit (inside measurement 600mmx600mmx 450mm depth) as per drawing with 250mm thick brick work in cement morter (4:1) bottom of the pit consisting of 10mm thick cement concrete (1:3:6) over brick flat soling, providing channel or invert with cement concrete (1:2:4) top of the pit covered with 100mm thick RCC slab (1:2:4) and reinforcement upto 1%) having one manhole cover of approved Quality with necessary fittings, plastering with sand and cement morter (4:1) 12mm thick On entire internal surface and exposed external surface of wall, 20mm thick bottom Of pit 6mm thick on internal and external surface of the RCC slab neat cement finishing On all plastered surfaces, including earthwork in excavation and fitting the sides of the pit With earth complete in all respects with all materials and labour900x 750 x600 mm 107 Construction of Septic tankas per approved drawing and specifications including supplying fitting and fixing necessary specials and fittings such as S.W. Tees, C.I. foot rests, 560mm dia. R.C.C. manhole covers of approver quality including necessary earth work in excavation in all sorts of soils including bailing out water, and shoring etc. as necessary and refilling the sides of the tank with clear filling up the chambers with clear water after removing all foreign materials from inside the chambers and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. complete in all respects with all materials and labours( approved water proofing compound shall have to be plastering all internal surfaces of the tankB) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL). 10 User 108 Construction of circular soak well 2.50mtr. deep with dry brickwork 2.10mtr.from the bottom end and brickwork in cement mortar (4:1) in top 1.50m with 20mm cement mortar plaster (4:1) inside including filling up the inside pit 1.00metre from bottom and 30 cm thick annular space all round the full depth of the pit upto dry brick work with brick metal of sizes 5cm to 15cm (bigger size placed at of the pit covered with 10cm thick R.C.C. slab (4:2:1) with necessary reinforcements and shuttering including 6mm thick (4:1)a)With 250 mm dry brickwork and 250mm thick cement brickwork(6:1). and 1.00m inside dia2.5mm deep 109 Ordinary Bat delivered and stacked at sith 110 Stone ballast 40 mm down of N.B variety delivered and stacked at site 111 Meditation Centre: Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.a) Depth exceeding 1.50m 112 Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 113 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 114 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 115 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 116 Cost of Boulder 150 mm size delivered and stacked at site 117 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety 118 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 119 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 120 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 121 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. a) In road and jhora work 122 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 123 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 124 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) conencted to one another with bracket gusset cleats as per design, direction of Engineer-in-charge complete ihncluding cuting to requisite size fabrication with necessary metal are welding conforming to IS 816-1956 & IS 9595 using electrodes of apporved make and brand conforming to IS 814-1957 haulage, hoisting and erection all complete.The rate includes the cost of rolled steel section, confumables such as the cost of gas and hirea charges of all tools and plants and labour required for the works incouding all incidental charges such as electricity charges labour insurance charges etc. i) For trusses spanning u p to 12.00 mSquare tube 50x50x4.5 mm th = 5.95 kg/m 125 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 126 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 127 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement moter, 15 mm thick 128 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 129 Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.). Ground Floor - Sal : Local 130 Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303- 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in- Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping]In Ground Floor 131 Wood work in door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of the framef) sissu, gammar, champ 132 Panel shutters with both side raised panels of doors and windows as per design (each panel consisting of a single plank without joint), including fitting and fixing the same in position but excluding the cost of hinges and other fittings. (f) sissu, gammar, champ 133 M.S. clamps for fixing doors & windows framesmade of flatbent bar, end bifurcated, fixedin cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction.b) 40mmx6mm above 250 mm 134 Iron butt hinge of approved quality fitted and fixed with steel screws with I S I mark100 mm x 75 mm x 3.5 mm 135 Anodised aluminium Aldrop/ Sliding of approved quality manufactured from extruded section conforming to I.S: specificatiion (I.S. 2681/66) fitted and fixed complete.(i) 250mm x 16mm dia 136 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated (iv)150mm long x 10 mm dia rod 137 Anodized aluminium D type handleof approved quality manufactured from extruded section confirming the I.S.230/72fitted & fixed complete. 150mm grip x 12 mm dia rod 138 P.V.C- False Ceiling :Providing False Ceiling made with framework of steel tube of 40mm x 20mm of not less than 18 gauge,the long and cross section will be welded with each other 1000mm to 1200mm apart the entire framework will be fixed in wall using rawlplug or gutties or screws etc. and suspended from ceiling with M.S flat 19mmx3mm as necessary,the entire frame will be painted with red oxide. PRINTED LAMINATED P.V.C Section 150mm x 12mmx 1.00mm (+/- 0.01mm) of approved quality and colour will be fixed on the frame so that the entire framework will not be visible from below P.V.C Section will be fixed with the frame with the help of self tapping steel screws including all materials and labour charges including fitting,fixing the same and hoisting including mending the damages in all respect and cost of paint as required as per direction of Engineer-in- Charge .In ground floor. 139 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge.For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M]3 Track W 140 Labour charge for fabricating and installation of composite door window, partition made from annodised extruded alloy sections for the following units: (A)Glazed aluminium windows ,made of extruded and anodised alloy aluminium sectn fabrications ,including cutting to proper shape and size , drilling and alinging of window and shutter frame fitted with a built locking arrangements, sliding rollers and other necessary fittngs, fixture, adhesives and joineries along with neooprene or EPDM gasketing inbetween window frame and masonry work( walls columns window, lintels etc) as well as between stars and shutters frame and fixing glass & Polysulphate Sealant and inbetween shutter and window frame where necessary including cutting to requisite size and fixing the glass as per drawing, specification and direction of Engineer-in-Charge. The rate includes the hire charges of all tools and plants ,including all incidential charges , adhesive,joineries such as screws cleats angles etc. but excludes the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, locking arrangements and rollers. 3 track sliding window 141 Supplying bubble free float glass of approved make and brand. Confirming to IS 2835-1987. (ix) 5mm thick coloured/ tinted/ smoke glass . 142 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooR Grills above 10 kg/m2 to 16 kg/m2 143 Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).a) With i)IN ROOF0.5 mm thick sheet 144 Galvonised iron sheet ridging fitted with necessary bolt, screws, washers etd complete (225 mm end lapping).450 mm laping each way 145 Supplying, fitting & fixing polycarbonate sheet of approved make & brand conforming to IS: 14443-1997 and having 50 micron UV protection layer under co-extrusion technology, Fire rating being B-s1 as per EN13501-1 certification, fitted and fixed with 60mm wide aluminium channel section top and bottom member in dry-glaze sandwitch system, (unit wt. of top and bottom members: 0.375 kg/m & 0.69 kg/m) of approved brand and profile, EPDM quality rubber gaskets, anti dust tape, end closer C channel and 75 mm long Self tapping screw being drilled through the centre leg of the bottom section with nuts placed at 300 mm apart without anyway puncturing the polycarbonate sheet, EPDM Washer 16 mm dia & 3 mm thick washer etc complete strictly as per manufacturers specification and direction of Engineer-in- Charge. (Payment to be made on area of finished work) .In Roof:- Natural/ Blue/Green/Bronze/Opal/Metallic grey colour. c)With 2 wall 10 mm overall thickness (wt.1.70kg/sqm,Ugvalue being 3.1 W/m2K, Min. cold bending radius of 1200 mm) 146 Galvonised iron sheet eaves gutter fitted and fixed with necessary 50 mm x 6mm M.S flat bar clamps bent to design, bolt , nuts, washers etc complete eaves gutter made of 0.63 mm thick. (b) 300 mm. wide gutter 147 Wooden eaves board as per design fitted and fixed complete.(iii) Ornamental eaves board (Badam/Gamar/Champ/Hallak). a) 19 mm thick 148 Holding down bolt with nuts including 100x100x6mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as diredted.25 mm dia 149 Lime punning about 3 mm thick with stone lime and shell lime 150 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 151 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIc(b) Two Coats 152 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 153 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 154 Chopal varnish of approved quality including preparing surface(i) On new wood surfacev 155 Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:(ii) 100mm Dia 156 C) Bend 87.5 degree (ii) 110mm Dia 157 D) shoe:(ii) 110mm Dia 158 Hanuman Mandir :Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 159 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 160 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 161 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 162 Cost of Boulder 150 mm size delivered and stacked at site 163 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety.1:3:6 proportion 164 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:2:4) 165 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 166 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 167 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. a) In road and jhora work 168 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 169 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 170 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) conencted to one another with bracket gusset cleats as per design, direction of Engineer-in-charge complete ihncluding cuting to requisite size fabrication with necessary metal are welding conforming to IS 816-1956 & IS 9595 using electrodes of apporved make and brand conforming to IS 814-1957 haulage, hoisting and erection all complete.The rate includes the cost of rolled steel section, confumables such as the cost of gas and hirea charges of all tools and plants and labour required for the works incouding all incidental charges such as electricity charges labour insurance charges etc. i) For trusses spanning u p to 12.00 mSquare tube 50x50x4.5 mm th = 5.95 kg/m 171 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 172 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 173 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement moter, 15 mm thick 174 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 175 Supplying, fitting and fixing Marble Slab/tile of 15mm to 18mm thickness in dado / wall in 15mm (avg.) cement morter(1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4kg/Sq.m at the back side of marble & pointing in cement morter (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of Engineer-In-Chargeincluding cost of materials, labours, scaffolding, staging, curing complete.With Chawk Dungri 176 Supplying and laying true to line and level 20 mm / 25 mm. thick precast roof tiles made of cement conc. with stone chips as per approved strength and density set in 25mm avg. thickcement morter(1:3) and filling up joint (3 mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per Sq.m back of tiles and then settting close the precasttiles, finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm. high skirting with the same tiles flushed with the insidesurface of parapet wall,finishing the mouth of rain water pipes, curving etc. as necessary complete as per direction of the Engineer-in-charge. (Levelling if necessary may be paidseparately). (a) For 20 mm. thick precast tiles (cement 14.6 kg/ Sq.m for underlayer) 177 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooR Grills above 10 kg/m2 to 16 kg/m2 178 Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) 179 Lime punning about 3 mm thick with stone lime and shell lime 180 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 181 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 182 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On Steel surface : 183 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On Steel surface : 184 Ticket Counter cum Guard Room:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 185 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 186 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 187 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (a) Single brick flat soling (thickness 75 mm.) 188 Cost of Boulder 150 mm size delivered and stacked at site 189 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety(a) 1:3:6) 190 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:2:4) 191 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:1.5:3) 192 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 193 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 194 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 195 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 196 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 197 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 198 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement moter, 15 mm thick 199 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 200 Supplying and laying true to line and level vitrified tiles of approved brand(size not less than 600mmx600mmx10mm thk) in floor, skirting etc. set in 20mm sand cement mortar(1:4) and 2mm thk cement slurry back side of tiles using cement @ 2.91kg/m2 or using polymerised adhesive(6mm thk layer applied directly over finished artificial stone floor/mosiac etc without any backing course) laid after application slurry using 1.75kg of cement per m2 below mortar only, joints grouted with admixture of white cemet and colouring pigment to match with colour of tiles/epoxy groutmaterials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete true to materials, labour and all other incidential charges complete true to manufacturers specification and direction of Engineer-In-Charge.(White cement, synthetic adhesive and grout materials to be supplied by the contractor)(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement moar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(A) Deep Colour & White 201 Supplying and laying 20 mm thick designer chequered tile of any shade and of approved quality as per I.S 1237:1980 laid in pattern as directed in pavement, foothpath including necessary under lay 25 mm thick average cement moter (1:3) complete in all respct with all labour and material. 202 Wood work in door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame f) sissu, gammar, champ 203 Panel shutters with both side raised panels of doors and windows as per design (each panel consisting of a single plank without joint), including fitting and fixing the same in position but excluding the cost of hinges and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. sissu, gammar, champ 204 M.S. clamps for fixing doors & windows framesmade of flatbent bar, end bifurcated, fixedin cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction.b) 40mmx6mm above 250 mm 205 Iron butt hinge of approved quality fitted and fixed with steel screws with I S I mark100 mm x 75 mm x 3.5 mm 206 Anodised aluminium Aldrop/ Sliding of approved quality manufactured from extruded section conforming to I.S: specificatiion (I.S. 2681/66) fitted and fixed complete.(i) 250mm x 16mm dia 207 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated(iv)150mm long x 10 mm dia rod 208 Anodized aluminium D type handleof approved quality manufactured from extruded section confirming the I.S.230/72fitted & fixed complete. 150mm grip x 12 mm dia rod 209 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge.For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr. 210 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architecturaldrawings and direction of Engineer-in-charge.For 2-Track window : Members for Bottom frame @ 0.875 Kg per Mtr. an.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr. and for Top and Side frame @ 1.067 Kg per Mtr. and for shutter Bottom and Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and Interlock member @ 0.612 Kg per Mtr.[Note : for estimate purpose construction wing may consider weight of 2- track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M]3 Track W 211 Labour charge for fabricating and installation of composite door window, partition made from annodised extruded alloy sections for the following units:-(A)Glazed aluminium windows ,made of extruded and anodised alloy aluminium sectn fabrications ,including cutting to proper shape and size , drilling and alinging of window and shutter frame fitted with a built locking arrangements, sliding rollers and other necessary fittngs, fixture, adhesives and joineries along with neooprene or EPDM gasketing inbetween window frame and masonry work( walls columns window, lintels etc) as well as between stars and shutters frame and fixing glass & Polysulphate Sealant and inbetween shutter and window frame where necessary including cutting to requisite size and fixing the glass as per drawing, specification and direction of Engineer-in-Charge. The rate includes the hire charges of all tools and plants ,including all incidential charges , adhesive,joineries such as screws cleats angles etc. but excludes the cost of extruded aluminium sections, glass, neoprene/ EPDM gasketing, locking arrangements and rollers. 3 track sliding window 212 Supplying bubble free float glass of approved make and brand. Confirming to IS 2835-1987. (ix) 5mm thick coloured/ tinted/ smoke glass . 213 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooRGrills above 10 kg/m2 to 16 kg/m2 214 Lime punning about 3 mm thick with stone lime and shell lime 215 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 216 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIc(b) Two Coats 217 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 218 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 219 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On timber or plastered surface : 220 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On Steel surface : 221 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber or plastered surface :a. iv. 2 coat any shad 222 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) OnSteel or Metal surface :a. iv. 2 coat any shad 223 Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:(ii) 100mm Dia 224 D) shoe:(ii) 110mm Dia 225 Toilet Block.( Gents & Ladies) Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. a) Depth exceeding 1.50m 226 E xcavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 227 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres. a) Depth exceeding 1.50m foundation filling 1/3 of ….. 228 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 229 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 230 Cost of Boulder 150 mm size delivered and stacked at site 231 (II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety(a) 1:3:6) 232 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:2:4) 233 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 234 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 235 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 236 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .25 to 30 mm thick shuttering 237 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 238 125mm thick brick work with 1st class bricks in cement morter (4:1) in groundfloor. 239 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.with (4:1) cement motera) 20 mm thick 240 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.with (4:1) cement moter, 15 mm thick 241 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 242 Supplying fitting and fixing 1st quality cremic tiles in wall and floors to match with the existing workmaterials(WALL)(b) Area of each tile above 0.09 Sq.m(i) Coloured or decorative 243 Supplying fitting and fixing 1st quality cremic tiles in wall and floors to match with the existing workmaterials(FLOOR)(b) Area of each tile above 0.09 Sq.m(i) Coloured or decorative 244 Wood work in door and window frames fine dressed fitted and fixed in position complete including a protective coat of painting at the contact surface of the framef) sissu, gammar, champ 245 Panel shutters with both side raised panels of doors and windows as per design (each panel consisting of a single plank without joint), including fitting and fixing the same in position but excluding the cost of hinges and other fittings. (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. sissu, gammar, champ 246 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 247 Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. 248 M.S. clamps for fixing doors & windows framesmade of flatbent bar, end bifurcated, fixedin cement concrete with stone chips (4:2:1) fitted & fixed complete as per direction.b) 40mmx6mm above 250 mm 249 Iron butt hinge of approved quality fitted and fixed with steel screws with I S I mark100 mm x 75 mm x 3.5 mm 250 Anodised aluminium Aldrop/ Sliding of approved quality manufactured from extruded section conforming to I.S: specificatiion (I.S. 2681/66) fitted and fixed complete. (i) 250mm x 16mm dia 251 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated(iv)150mm long x 10 mm dia rod 252 Anodized aluminium D type handleof approved quality manufactured from extruded section confirming the I.S.230/72fitted & fixed complete. 150mm grip x 12 mm dia rod 253 Supplying best Indian sheet glass panes set in putty (as per I.S specification) and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & upto 6 m height for external wall). 4 MM THICK 254 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground flooRGrills above 10 kg/m2 to 16 kg/m2 255 Supplying fitting fixing steel windows and ventilators with or without integrated grills confirming to IS 1038 - 1975 and manufactured from rolled sections confirming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etcincluding hoisting in position, straightrning if rerquired, fixing lugs in cement concrete (1:2:4) with stone chips 20mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. (b) Openable steel windows as per IS sizes with side hung shutters bars with/without fixed type ventilators. 256 Lime punning about 3 mm thick with stone lime and shell lime 257 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 258 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIc(b) Two Coats 259 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 260 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 261 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. (a) On timber or plastered surface : 262 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc. (a) On timber or plastered surface : 263 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.(a) On timber surface : 264 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. (a) On Steel surface : 265 Supplying fitting fixing UPVC pipes A-Type and confirming to IS:13592-1992 with all necessary clamps,nails including making hole in the wall floor etc. cutting trenches in any soil through masonry concrerte structure etc. if necessary and mending good damages including joining with jointing materials(Spun Yarn, VAlamoid/Bitumen/M-Seal etc) complete.UPVC Pipes:(ii) 100mm Dia 266 D) shoe:(ii) 110mm Dia 267 SANITARY & PLUMBING: Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)Work above ground.32 mm 268 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)15 mm (b) For CONCEALED wORK 269 Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure) (Dia)75mm 270 Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure) (Dia)25mm 271 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).32 mm 272 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).15 mm 273 Supplying, fitting and fixing alloy iron with brass spindle bib cock/ stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm.20 mm 274 (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).20 mm 275 (a) (i) Chromium plated Bib Cock short body 276 Supplying, fitting and fixing push cock of heavy quality and of approved make and brand.(a) Cast iron 15 MM 277 Supplying, fitting and fixing shower of approved brand and make. (a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 278 Supplying P.V.C. water storage tank of approved make quality with closed top with lidUPTO 1000 Ltr. 279 Wash basin wite vitrous china of approved make ( without fittings) supplied, fitted and fixed in position on 75 mm x 75mm x 75mm wood blocks and cast iron brackets including two coat of painting oa C. I bracket (i) 450 x 300mm size 280 Supplying fitting fixing EWC in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.With P Trap 281 Supplying fitting fixing Closet seat of approved make with lid and CP hinges , rubber buffer and brass screwscompletea) EWCiv) Bestolite (solid type ) white 282 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or S trap (excluding cost of concrete for fixing).(ii) 530 mm X 410 mm 283 Supplying fitting and fixing C.I or P or S trap comforming to I.S 3989/1970 and 1729/1964 including painting the exposed surface.P trap (100 mm dia) 284 Supplying, fitting fixing soap holder.c.(a) PTMT(Prayag or equivalent) 285 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 286 Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass (i) 25 mm dia. and 450 mm long 287 supplying fitting and fixing flat back urinaal ( half stall urinal ) in white vetreous china ware of approved make in position with brass screwson 75 mm x 75 mm x 75mm x wooden block complete(ii) 470 mm X 280 mm X 340 mm 288 Supplying fitting fixing best quality Indian make mirror 5.5 mm thick with Silvering as per ISI specification supported on fibre glass frame of any colour, frame size 550 mmx400mm 289 Supplying fitting and fixing in position C.I manhole/ pit cover with rim.(b) Square = (i) 450 mm X 450 mm X 16 kg (approx.) 290 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 291 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Lengthb) 110 mm 292 fittings plain teeb) 110 mm 293 Bend 45 degreeb) 110 mm 294 xi) Door Bend (T.S.) b) 110 mm 295 xvi) Pipe Clipb) 110 mm 296 xv) Vent Cowlb) 110 mm 297 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin- charge. (Payment will be made on centre line measurement of the total pipeline including specials.Work above groundb) 110 mm 298 Construction of inspection pit (inside measurement 600mmx600mmx 450mm depth) as per drawing with 250mm thick brick work in cement morter (4:1) bottom of the pit consisting of 10mm thick cement concrete (1:3:6) over brick flat soling, providing channel or invert with cement concrete (1:2:4) top of the pit covered with 100mm thick RCC slab (1:2:4) and reinforcement upto 1%) having one manhole cover of approved Quality with necessary fittings, plastering with sand and cement morter (4:1) 12mm thick On entire internal surface and exposed external surface of wall, 20mm thick bottom Of pit 6mm thick on internal and external surface of the RCC slab neat cement finishing On all plastered surfaces, including earthwork in excavation and fitting the sides of the pit With earth complete in all respects with all materials and labour900x 750 x600 mm 299 Construction of Septic tankas per approved drawing and specifications including supplying fitting and fixing necessary specials and fittings such as S.W. Tees, C.I. foot rests, 560mm dia. R.C.C. manhole covers of approver quality including necessary earth work in excavation in all sorts of soils including bailing out water, and shoring etc. as necessary and refilling the sides of the tank with clear filling up the chambers with clear water after removing all foreign materials from inside the chambers and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. complete in all respects with all materials and labours( approved water proofing compound shall have to be plastering all internal surfaces of the tankB) With Bazree (N.B Varity) (Other than SAIL/TATA/RINL). 50 Users 300 Construction of circular soak well 2.50mtr. deep with dry brickwork 2.10mtr.from the bottom end and brickwork in cement mortar (4:1) in top 1.50m with 20mm cement mortar plaster (4:1) inside including filling up the inside pit 1.00metre from bottom and 30 cm thick annular space all round the full depth of the pit upto dry brick work with brick metal of sizes 5cm to 15cm (bigger size placed at of the pit covered with 10cm thick R.C.C. slab (4:2:1) with necessary reinforcements and shuttering including 6mm thick (4:1)a)With 250 mm dry brickwork and 250mm thick cement brickwork(6:1). and 1.00m inside dia 301 Ordinary Bat delivered and stacked at sith 302 Stone ballast 40 mm down of N.B variety delivered and stacked at site 303 (8)Gazeboo(5 Nos) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 304 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres. a) Depth exceeding 1.50m foundation filling 1/3 of ….. 305 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 306 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 307 Cost of Boulder 150 mm size delivered and stacked at site 308 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety(a) 1:3:6) 309 Ordinary cement concrete (mix 1:2:4) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:2:4) 310 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes.ii ) River bazree (1:1.5:3) 311 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 312 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site. a) In road and jhora work 313 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 314 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) .(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 315 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 316 Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohrs hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).b) In Ground Floor: Sizes-600 mm x600mm x10 mm with breaking strength > 1500 N 317 Lime punning about 3 mm thick with stone lime and shell lime 318 Applying Interior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 319 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothening the surface. 320 (9)3 nos of gate and front drop point ) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge . a) Depth exceeding 1.50m 321 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres. a) Depth exceeding 1.50m foundation filling 1/3 of ….. 322 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 323 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth. (a) Single brick flat soling (thickness 75 mm.) 324 Cost of Boulder 150 mm size delivered and stacked at site 325 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety(a) 1:3:6) 326 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 327 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor/ mild steel ( other manufacture nat specified) 328 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 329 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface. with (4:1) cement motera) 20 mm thick 330 M.S or W.I ornamental grills of approved designjoint continiously welded with M.S or W.I flats and bars of window railing etc fitted and fixed with necessary screws and lugs in ground floor.Grills above 16 kg/m2 331 80 mm thick interlocking designer concrete paver block M-40 grade for medium-traffic zone & utility cuts on arterial roads etc. as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge.Colour Decorative 332 Lime punning about 3 mm thick with stone lime and shell lime 333 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC (b) Two Coats 334 Protective and Decorative Acrlylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrlylic primer as required. The rate includes cost of material, labour, scaffolding and all incidential charges but excluding the cost of primer.In Ground floor (Two Coat)b) Premium 100% Acrylic Emulsion 335 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.(a) On Steel surface : 336 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. (a) On Steel surface : 337 (10)Road Cum Parking (L=300.0m, Width-6.0m)Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .a) Depth exceeding 1.50m 338 Earthwork in filling in foundation tenches with good earth in layers not exceeding 15 cm including watering and ramming layer by layer complete with earth obtained from excavation of foundaiton or from fresh excavation of land arranged by Deptt. within a lead of 150 metres.a) Depth exceeding 1.50m foundation filling 1/3 of ….. 339 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal,loading into truck and cleaning the site in all respect as per direction of Engineer in charge 340 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 341 Cost of Boulder 150 mm size delivered and stacked at site 342 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes .ii ) River bazree (1:1.5:3) 343 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 344 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . 25 to 30 mm thick shuttering 345 (11)Water Reserve tank (13,000 lits) and water supply with HDPE pipe(L=450.0m):Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .a) Depth exceeding 1.50m 346 Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(a) Single brick flat soling (thickness 75 mm.) 347 Cost of Boulder 150 mm size delivered and stacked at site 348 (II) Cement concrete with 30 mm down graded shingles excluding shuttering. N.B. Variety 349 Ordinary cement concrete (mix 1:1.5:3) with graded stone chips (20mm nominal size) excluding shuttering and reinforcement if any, in Ground Floor as per revelent IS codes . ii ) River bazree (1:1.5:3) 350 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. i) Tor/ mild steel ( other manufacture nat specified) 351 Rubble masonry in cement (1:6) with hard dressed stones from approved quarries and clean, coarse and washed sand including carriage of all materials to site.a) In road and jhora work 352 Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns ,lintels curved or straight including fitting , fixing and striking out after completion of works(upto roof of ground floor) . (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work( Add 18 for every floor) 353 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar, including rounding off corners or chamfering corners as directed and recking out joints or roughening of concrete surface.with (4:1) cement motera) 20 mm thick 354 Neat cement punning above 1.50 mm thick in wall, dado window, sills, floor 355 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)Work above ground. 32 mm 356 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)Work above ground. 15 mm For CONCEALED work 357 Supply of High Density Poly-ethylene Pipe conforming to IS - 4984 - 1985 (Dia) [PE - 63]A. 6 Kg / Sq.Cm. (Working Pressure) (Dia) 358 B. 10 Kg / Sq.Cm. (Working Pressure) (Dia)25 mm dia 359 Labour, fitting and fixing high density polythene pipe or P.V.C. pipe for above ground including cost of joining material paints etc fitting and fixing all necessary special cutting pipe making thread, cutting holes on wall or RCC floor where necessary and mending good all damages excluding the cost of masonary. Work above ground 360 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 80 mm dia 361 Supplying, fitting and fixing Peets valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). 25mm dia 362 Hanuman Statue 363 Garden Chair 364 DUSTBIN 365 Glow Sign Board 366 Glow Sign Board… 367 Glow Sign Board
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
48.
Housing Urban and Rular Development #10312082 Price Bid
Tender For Rate Contract For Day To Day Maintenance Works At P.B.M Hospital, Bikaner - PART -A Civil work 2 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 3 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil. 4 Carriage for 4km(building rubbish) 5 Providing and laying in position cement cocrete including curing, compaction etc. of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).. 6 Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering.M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 7 Brick masonry with F.P.S. bricks of class designation 100 infoundation and plinth with bricks Cement mortar 1 : 6 (1 cement : 6 coarse sand) 8 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 6 (1 cement : 6 coarse sand) 9 Half brick masonry in Superstructure , above plinth level upto floor Vlevelusing bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) 10 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:i) Ist course of applying cement slurry @ 4.4 Kg/sum mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface ii).IInd course of 20mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water. proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.iii).IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg per sqm. of area.iv)IVth course of 400 micron thick PVC sheet .(Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen@ 1.7 Kg/sqm.) 11 Supplying and fixing in walls machine cut and polished stone shelves, tands andin CM 1:3 with machine cut edges :Kota stone minimum 30mm thick. 12 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar).Extraforusingsize above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finishedtiles in place of 300mm x 300mm size. 13 Providing and fixing 1st quality MAT ceramic tile confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).size 300mmx300mm 14 Making khurras 450 x 450mm with average minimum thickness 50mmcement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and onecoat of neat cement, rounding edges and making and finishing the out let complete. 15 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 16 Grading roof for water proofing treatment withwater proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 17 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blownbitumen 85/25 or 90/15 conforming to IS : 702 applied hot 1.45Kg. per square meter of area for each course, second course of roofing felt type 3 grade –I(Hessian based self finished bitumen felt )and fourth and final course of stone grit 6mm and down size of pea sized gravel spread at 6cubes diameterper square meter including preparation of surface, but excluding grading, completewithBitumenfelt(Hessianbase)type3grade - Iconforming to : 1322. 18 Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg ofVG-40 (30/40 )grade and 0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. 19 Providing and fixing 20 mm thick precast terrazo tiles of approved make, with marble chips of size upto 6mm laid over roof with neat cement slurry mixed with pigment to match the shade of the tiles, including cutting ,grinding rubbing with machinecomplete on 20 mm thick bed of cement sand mortar 1 : 4. 20 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 21 Providing and fixing in cement sand mortar 1 : 4 single paitam (rebated) stone doors windows and ventilator frames of approved quarry :Size 100x 75mm 22 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 23 Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size.Welded mesh 50 mmx 50 mm x 2.1 mm 24 Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). 25 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 26 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A:35 mm thick .Commercial Veneer both side 27 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm 28 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm 29 Repair to damaged RCC slabs, beams and columns etc for strengthening with cement mortar 1 : 2 in following steps :-Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried.Applying Epoxy primer on the exposed steel bars.Applying Epoxy hardener and resin mix (as per manufectureds specification) on concrete and steel bars with brush.Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day.Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete.Cure the plastered surface for 15 days, All work including scaffolding etc. complete in all respect. 30 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1 :4 ( 1 cement : 4 coarse sand) 31 Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats) 32 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 33 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. 34 Providing and fixing 150 mm wide sheet covering over expansion joints with iron screws as per design to match the colour / shadeofwall treatment.Aluminium fluted strips 2mm thick 35 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size 550 mm x 400 mm 36 P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor 37 P&F Jet spray for water closet with C.P. copper tube flange of approved make. 38 P & F water closet Seat Covers with brass hinges complete :Solid PVC (IS 2548 marked) grade-I white 39 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231 40 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: size580*440mm 41 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (large) or half stall size 610x400x80mm. 42 P&F Marble Urinal Partition slab both sides polished of approved design cut from marble size 900x600mm.Makrana II quality marble having light spots 43 P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor :1.0 mm thick stainless steel AISI -304 & IS 13983-1994kitchen sink of approved make as per Engineer-in-chargewith large waste coupling.24 x 18 x 820x16x8 44 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 750 (-do-) litres capacity 45 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 46 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:C.P. Brass bib cock,15mm nominal bore. 47 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal size 48 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)25mm nominal size 49 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge.(External work).20mm nominal size 50 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete :Brass wt.Not less than 400 gm, 20mm. 51 P & F 15 mm. Dia Connection Pipe of approved quality/make PVC pipe withC.P. Brass nuts upto length,450mm 52 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :.Gun-metal 25mm nominal bore. 53 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore 54 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: 55 plain Tee with Door 110mm dia 56 Coupler 110mm dia 57 pipe clip 110mm dia 58 Vent Cowel 110mm dia 59 bend 87.5 110mm 60 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make Nahni Trap without Jali 4”110mm 61 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant.110mm dia 62 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant160mm dia 63 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.inside size 600mmx450mm depth upto 0.5 M to 1.0 M –do- 64 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.1: 4: 8 or leaner mix. 65 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar. 66 Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meters lead:Of area 3 square meter and below. 67 Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 25mm to 40mm. 68 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 69 Renewing glass panes,with putty and nails wherever necessaryFloat glass panes of thickness 5 mm 70 Repair to brick masonary in cement sand mortar 1:6 withnew brick. 71 Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) 72 For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) 73 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminatedparticleboardwithdecorativelaminationononesideandbalancinglaminationonotherside. 74 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.)With glass panes of 4.0 mm thickness ( weight not less than 10.0 kg/sqm) as per IS : 2835. 75 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. With stainless steel cover plate 76 Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 77 Providing and fixing aluminium U shape handle of size 100mm with SS screws etc. Complete as per direction of Engineer-in-chargeAnodized (AC 15 ) aluminium 78 Part B : Supply of Material 79 European type white glazed vitreous china Ist quality W.C. pan 80 Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings 81 Unplasticised P.V.C.connection pipe with brass union 45 cm long 15 mm bore 82 Anodised Aluminium hanging type door stopper 83 Ply wood 5 ply with teak ply on both faces 9 mm thick 84 C.P. Brass bibcock 15 mm 85 C.P. Brass long body bibcock 15 mm 86 C.P. Brass angle valve 15 mm 87 Flushing Cistern P.V.C. 10 lts capacity ( low level ) (White) ( with fittings, accessories and flush pipe) 88 PVC Tank Cover 500 Lt. capacity 89 PVC Tank CoverAbove 500 Lt. capacity 90 Chlorinated Polyvinyl - chloride (CPVC) pipe 20 mm outer dia. 91 Chlorinated Polyvinyl - chloride (CPVC) pipe 25 mm outer dia. 92 Portland Cement 93 White Cement 94 Bajri 95 Stone Aggregate (Single size) : 10 mm nominal size 96 Stone Aggregate (Single size) : 20 mm nominal size 97 Stone Aggregate (Single size) : 40 mm nominal size 98 Brass handles 100 mm with plate 150x32 mm 99 Brass 150 mm floor door stopper (0.357kg) 100 Part CSupply of Labour 101 Fitter 102 Blacksmith 103 Mason 104 Carpenter
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
49.
Tourism #10301450 AOC
Tender For Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. All Kinds Of Soil , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer In Charge. , Carriage Of Debris From The Site Of Work Like Excavated Earth,Demolished Stones, Rock Boulders,Vegetation Etc, And Disposing The Same To A Distance Of 1.00Kms.Including All Lead And Lifts Etc. Complete By Means Of Tipper Truck( Contractor To Indentify The Site Of Disposal At His Own Cost And Risk). , Brick Work Using Common Burnt Building Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) With Bricks Of Class Designation 75 Kg/ Cm2 (Wire Cut Bricks). In Superstructure Upto Floor Five Level. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Exposed Decorative Laterite Masonary Of Stones As Specified And Laid As Directed By Architect In Cement Mortar 1: 4 (1Cement: 4 Coarse Sand ) , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) Above Plinth Upto Level V. , Providing And Laying In Position Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 40 M Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing .All Works Upto Plinth Level , Providing & Laying Cement Concrete 1:3:6 (1 Cement: 3 Coarse Sand: 6 Graded Granitic Or Basaltic Stone Aggrt. 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In:All Works Upto Plinth Level , Providing And Laying In Position (1:11/2:3) Reinforced Cement Conrete Excluding The Cost Of Centering, Shuttering, Finishing And Reinfrocement (1 Cement: 1½ Coarse Sand:3 Graded Stone Agg 20Mm Nominal Size) All Works Upto Plinth Level , Providing And Laying In Position (1:11/2:3) Reinforced Cement Conrete Excluding The Cost Of Centering, Shuttering, Finishing And Reinfrocement (1 Cement: 1½ Coarse Sand:3 Graded Stone Agg 20Mm Nominal Size) ..In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Structs Etc. Upto Floor Five Level , Providing And Laying In Position (1:11/2:3) Reinforced Cement Conrete Excluding The Cost Of Centering, Shuttering, Finishing And Reinfrocement (1 Cement: 1½ Coarse Sand:3 Graded Stone Agg 20Mm Nominal Size) ..In Beams, Suspended Floors, Roofs Having Slope Upto 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases Upto Floor Five Level , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For :Foundations, Footings, Bases For Columns , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For :Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For :Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates I) Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only + Extra To Be Added For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De- Shuttering And De-Centering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1M Or Part Thereof. (Plan Area To Be Measured) Suspended Floors, Roofs, Landings, Beams And Balconies (Plan Area To Be Measured) Where Inclination To The Horizontal Exceeds 30° Requiring Shuttering On The Underside & Upperside If Required (Only Area Of Underside Shall Be Measured For Payment) , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) )(Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Providing Woodwork In Frames Of Doors, Windows, Clerestory Windows Trusses & Other Frames Wrought Framed And Fixed In Positon.:Second Class Indian Teak Wood , Providing And Fixing 38 Mm Thick Panelled Glazed Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Window Including Black Enamelled Iron Butt Hinges With Necessary Screws: Second Class Indian Teak Wood , Providing And Fixing Louvers 50 Mm Wide In Grooves In Clerestory Window Frames Excluding The Cost Of Frames.:Second Class Indian Teak Wood 12 Mm Thick , Providing Flat Iron Hold Fast 40 Cm Including Fixing To Frame With 10 Mm Dia Bolts, Nuts And Wooden Plugs And Embeded In Cement Concrete Block 30 X 10 X 15 Cm 1:3:6 Mix (1 Cement: 3 Coarse Sand: 6 Stone Aggregate 20 Mm Nominal Size.: 40 X 3 Mm Flat Iron Hold Fast, 15 Cm Long , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws.:Plain Grill , Providing And Fixing Bright Finished Brass Butt Hinges With Necessary Screws Etc Complete: 125 X 70 X 4 Mm (Ordinary Type) , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete: 200 X 10 Mm , Providing And Fixing Bright Finished Brass Handles With Necessary Screws Etc Complete: 125Mm , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete:250 X 16 X 5 Mm , Providing & Fixing Bright Finished Brass 100 Mm. Mortice Latch & Lock & A Pair Of Levers, Handles With Necessary Screws Etc. Complete (Indian Make Of Approved Quality). , Providing And Fixing 150 Mm. Bright Finished Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutter Thickness Complete. , Providing And Fixing Brass Hydraulic Door Closer Of Make Everest Universal 68 Or Equivalent With Necessary Screws And Fittings Complete. , Providing And Fixing Factory Made Panelled Door Shutter Fabricated Out Of Second Class Teak Wood With Styles Top And Middle Rail, Lock And Bottom Rail With Navopan Or Equivalent Weather Resistant Melamine Faced Prelaminated Twin Particle Board - Bonded With Bwp/Bwr Exterior Grade Synthetic Resin As Per Is - 3087 (1985)Type I Including Anodised Aluminium Butt Hinges With Necessary Screws Etc. Complete.: 12 Mm Thick Panel (Iii) 30 Mm Thick , Providing And Fixing Flush Door Shutter Of Solid Core Melamine Face Three Layered, Prelaminated Wood Based Particle Board Exterior Grade Having Shade Of Choice On Both Sides (Ptx) Or Having Shade Of Choice On One Side And Balancing Lamination On The Other Side (Plx) As Per Is 3087 (1985) Type I On The Edge Of Novopan Or Equivalent Bonded With Bwr/Bwp Synthetic Resin With Second Class Teak Wood, Lipping Of Section Of Size 12 Mm X 30 Mm Flange And 18 Mm X 10 Mm Web (18 Mm Deep) Fixed Into 18 X 10 Mm Groves Of Shutter With Water Resistant Adhesive And Fully Threaded G.I. Screws 50 Mm Not More Than 450 Mm Centre To Centre Including Anodized Aluminium Butt Hinges With Necessary Screws Etc. Complete.:Natural Teak On Both Faces:2) 30Mm Thick , Frp (Fiber Reinforced Polymer) Frames With Wood Finish Manufacture, Supply And Installation (With Anchor Fastener) Of Epee Or Equivalent Goan Make Frp (Fiber Reinforced Polymer) Frame Of Cross Section As Per Options Below With Right Angle Joint And Frp (Fiber Reinforced Polymer) Laminate Made From 450 Grams Per Sq.Mts (Gsm) Chop Strand Glass Fiber (Matt) And Unsaturated Polyester Resin With Viscosity Range Of 400/450 Centipoises Per Second (Cps). The Core Of Frame Would Be Filled With Seasoned Wood As Infill Material. The Slot Of Frame For Door Resting Will Be Of Suitable Width So As To Take Specified Thickness Door. The Frame Will Be Water Proof As Well As Mild Acid/ Alkali Resistant Manufactured In An Iso 9001- 2015 Certified Company. Accessories:I) S. S. Hinges 4 - 3 Nos Ii) S. S. Latch - 1 No Iii) Tower Bolt 5 - 2 Nos Iv) Handle 5 - 2 Nos Shutter Thickness: A) 30Mm , Providing And Fixing Anodized Aluminium Shutters In Accordance With The Specification Annexed With Goa Schedule Of Rates (2004) Vol & Ii Including All Taxes, Transportation, Scaffolding And Handling Etc. Complete As Per Direction Of The Engineer-In-Charge: Windows With Two Sliding Shutters Using 18 Mm Series Shutters Section.:Figured Glass , Providing And Fixing Anodized Aluminium Shutters In Accordance With The Specification Annexed With Goa Schedule Of Rates (2004) Vol & Ii Including All Taxes, Transportation, Scaffolding And Handling Etc. Complete As Per Direction Of The Engineer-In-Charge: Adjustable Louvered Windows.:Plain Glass , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of (Sail, Tata. Vizag, Jsw ,Apollo Steel Ltd.) Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand): 20 Mm Thick. , Kotah Stone Slab Flooring Over 25 Mm Thick In Risers Of Steps, Skirtings, Dado & Pillars Laid On 12Mm (Average) Thick Cement Mortor 1:3 (1 Cement : 3 Coarse Sand) & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Polishing Complete. , Providing And Laying Jet Black Mirror Polish Granite Flooring And Dado Over 20Mm Thick Base Of Cement Mortar 1:4 Laid Over And Jointed With Cement Slurry Including Rubbling Complete Granitic Slab (Jet Blck With Mirror Polish) 20 Mm Thick Add Q0% Wastage 1.00 , Providing 25 Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer-In-Charge , Providing And And Laying Vitrified Floor Tiles In Different Sizes Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make In Colours And Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigment Etc., Complete :600X 600 Mm Light Shades , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm.:60 Mm Thick In All Colours Except Grey (M35 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm.:60 Mm Thick In Grey Colour (M35 Grade) , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Elite Brown , Providing And Fixing 18 Mm Thick Gang Saw Cut,Mirror Polished, Premoulded And Prepolished,Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade,Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand),Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade, Area Of Slab Over 0.50 Sqm:Cherry Red , Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories (Tata Make) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. , Add For Providing & Fixing Flashings -[Corners, Ridges, Valleys, Gable End & Trims] (Girth Upto 610Mm) Including All The Accessories Complete As Per The Directions Of The Engineer In Charge. , Providing And Fixing Prince Or Equivalent Make Pvc Swr Half Round Eaves Gutter With Bolts, Nuts And Flat Iron Brackets 40 X 3 Mm Size Complete.-180 Mm Nominal Size , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr Joint Bracket With 2 Clamps For Socketed Half Round Eaves Gutters.:180 Mm Nominal Size , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr 90 Deg. Elbow With/Without Outlet With 2 Clamps For Socketed Half Round Eaves Gutters.:180 Mm Nominal Size , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr Short Stop Ends For Socketed Half Round Eaves Gutters.:180 Mm Nominal Size , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing & Fixing Of Metal Tile Ceiling System Comprising Of Tile Of 600Mm Wide And 600Mm Long Manufactured Of 0.6Mm Thick Aluminium Clip-In Perforated 2.5Mm Dia 5.5Mm C/C. The Tile Shall Be Manufactured On Advanced Equipment, Which Includes Several Levelling Stages In The Manufacturing Process. Tile Ends Shall Be Raised With Pips And Stops To Ensure Positive Engagement Into The Spring To Enable For De-Mounting Of Individual Panels. The Tile Sides Shall Be Sufficiently High To Ensure A Minimum Deflection Across The Length Of Tile. All Tiles Shall Be Bevelled Edged. The Tile Shall Be Polyester Based, Powder Coated In White Colour. Tile Shall Be Clipped Into Clip In Profile Of 0.5Mm Thick G.I. The Clip In Profile Shall Be Supported From Slab By Means Of Rigid Suspension Of 4Mm G.I. Rod, Hold On Clamp With Clip. Acoustic Felt: Non-Woven Felt Made Of Glass-Reinforced Fibreglued Over The Perforation For Sound Absorption. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , 20Mm Cement Plaster 1: 3 (1 Cement : 3 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , Neat Cement Punning , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) Extra For Plastering Spherical Ceiling , 20Mm Cement Plaster 1: 3 (1 Cement : 3 Fine Sand) Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) Extra For Plastering Done On Mouldings, Cornices, Or Arch It Raves Including Neat Finish To Line And Level.In One Coat , 12Mm Thick Moulded Cement Mortar Bands In Cement Mortar 1:4 (1 Cement : 4 Fine Sand) Cm Per Meter , Painting One/ Two More Coats With Ordinary Ready Mixed Paint Of Approved Brand & Manufacture In All Shades Except White Or Green On Old Work To Give An Even Shade. , Painting Two Or More Coats (Excluding Priming Coat) With Superior Quality Ready Mixed Paint For Steel Work Of Approved Brand & Manufacture In All Shades On New Work To Give An Even Shade. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Wall Painting (One Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On Old Work To Give An Even Shade. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture(Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Painting One Or More Coats Of Acryllic Exterior Paint Of Approved Brand And Manufacture(Such As Dulex/ Asian Paints/ Sherwin Willians) On Old Work Including Cleaning The Surface With Water Etc. Complete. , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge:110 Mm Dia , Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 1 Km. (Earth Measured In Stacks Will Be Reduced By 20% For Payment). , Spreading Of Sludge, Dung Manure Or/And Good Earth In Required Thickness (Cost Of Sludge, Dung Manure Or/And Good Earth To Be Paid Separately). , 1) Grassing With Doob Grass Including Watering And Maintenance Of The Lawn For 30 Days Or More Till The Grass Forms Of Thick Lawn Free From Weeds And Fit For Moving, Including Supplying Good Earth If Needed. (Cost Of Doob Grass Not Included ) 2) In Rows 15 Cm Apart In Either Direction. , Digging Holes In Ordinary Soil And Refilling The Same With The Excavated Earth Mixed With Manure Or Sludge In Ratio Of 2: 1 By Volume (2 Parts Or Stacked Volume Of Earth After Reduction By 20% And 1 Part Of Stacked Volume Of Manure After Reduction By 40%) Flooding With Water, Dressing Including Removal Of Rubbish & Surplus Earth If Any With All Leads & Lifts (Cost Of Manure Or Sludge Of Extra Good Earth If Needed To Be Paid For Separately) Holes 1.2M Dia And 1.2M Deep , Providing And Fixing M.S. Flat Iron Tree Guard 60Cm Dia & 2 M High Above Ground Level, Formed Of 4 Nos. 25 X 6Mm And 8 Nos. 25 X 3Mm Vertical M.S. Flat Iron Rings In Two Halves, Bolted Together With 8Mm Dia And 30 Mm Long Bolts Including Painting Two Coats With Paint Of Approved Brand And Manufacture Over A Coat Of Priming, Complete In All Respects. , Proving And Fixing White Vitreous China Water Closet Squating (European Type W.C. Pan) With Seat And Lid, C.P. Brass Hinges And Rubber Buffers 10 Lts. High Level P.V.C.. Flushing Cistern (Of Approved Make ) With Fittings, Rack Bolts 32 Mm Diameter P.V.C. Telescopic Flush Pipe With Fit Tings And Clamps 25Mm P.V.C.. Over Flow Pipe With Specials & Mosquito Proof Coupling Of Approved Municipal Design And Nylon. Chain And Pull Complete, Cutting And Making Good The Walls Ad Floors Where Required.:W.C. Pan With White Plastic Seat And Lid. , Providing And Fixing Vitreous China Wash Basin With R Sor C.I.Brackets Painted White,15Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Including Cutting And Making Good The Walls Where Required.:Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing & Fixing (4) 100 Mm Sand Cast Iron Grating For Gully Floor Or Nahni Trap. , Providing And Fixing 600 X 450 Mm Bevelled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Asbestos Sheet Ground Fixed To Wooden Cleats With C. P. Brass Screws And Washers. , Providing And Fixing Toilet Paper Holder :C.P. Brass , Providing & Fixing Liquid Soap Container With C.P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws A)Glass Container , Providing And Fixing White Vitreous China Type Water Closet Squatting Pan (European Type W.C. Pan) With Flush Valve Nelson/ Similar) Fully Chromium Plated With Stop Cock Wall Flanges Flush Pipe Or Elbow And Vaccu.M Breaker Coupling Etc. Including Cutting Making Good The Walls And Floors Where Required. , Providing And Fixing Brass Bib Cock (Heavy) Of Approved Quality :15 Mm Nominal Bore , Providing And Fixing Brass Stop Cock (Heavy) Of Approved Quality : A)15 Mm Nominal Bore , Providing And Fixing Brass Stop Cock (Heavy) Of Approved Quality :B)20 Mm Nominal Bore , Providing And Fixing Brass Stop Cock (Heavy) Of Approved Quality : C)25 Mm Nominal Bore . , Providing And Fixing Brass Stop Cock (Heavy) Of Approved Quality :D)32 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality :A)15 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality :B)20 Mm Nominal Bore , Providing And Fixing Ball Valve (Brass) Of Approved Quality :A) High Pressure With P.V.C. Floats: 25Mm Nominal Bore , Providing And Fixing Non-Return Valve Of Approved Quality :A)25 Mm Nominal Bore , Providing And Fixing Non-Return Valve Of Approved Quality : B)32 Mm Nominal Bore , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701; 1996. C) 1000 Lit. Capacity , Providing And Fixing Square-Mouth S.W. Gully Trap Grade ‘A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of Cover To Be Not Less Than 4.53 Kg). And Frame To Be Not Less Than 2.72 Kg As Per Standard Design : A)100 X 100 Mm Size P Type , Constructing Brick Masonry Manhole Or Inspection Chamber With Second Class Bricks In Cement Mortar 1:5 (1 Cement :5 Fine Sand) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement: 2 Coarse Sand;4 Graded Stone Aggregate 20Mm Nominal Size Foundation Concrete 1:2:4 Mix (1 Cement ;2 Coarse Sand :4 Graded Stone Agrregate 40Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With A Floating Coat Of Neat Cemetn And Making Channels In Cement Concrete 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) Neatly Finished Complete As Per Standard Design. : D)Inside Size 60 X 60Cm And 60Cm Deep Including C.I. Cover With Frame (Light Duty) 455X610mm Internal Diameter Total Weight Of Cover And Frame To Be Not Less Than 38 Kg. (Weight Of Cover 23 Kg). , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design. , Providing And Fixing Rigid Pvc S.W.R. (Soil, Waste & Rain Water) Drainage Pipes Of Approved Including Lubricant Etc. Complete (Single/Double) Socketed: A)110 Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating Etc Complete Bend With Door :A)100 Mm Dia , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door: A)110 Mm Dia , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door :A)110 Mm Dia , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door 110 Dia A)110Mm Dia , Providing And Fixing R.P.V.C. Vent Cowl: A)110 Mm Dia , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bib Cock Short Body Jaquar Make Or Equivalent. Confirming To Is 8931;1993 A)15Mm Nominal Bore , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flance Jaquar Make Or Equivalent. Confirming To Is 8931;1993 A)15Mm Nominal Bore , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Concealed Stop Cock With Slinding Flance 15 Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 A)15Mm Nominal Bore , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5 Pipe). A)15 Mm Outer Dia Cpvc Pipe , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5 Pipe). B) 20 Mm Outer Dia Cpvc Pipe , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc. A)15 Mm Outer Dia Cpvc Pipe , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc. B)20 Mm Outer Dia Cpvc Pipe , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc. C)25 Mm Dia Nominal Outer Dia Pipes. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes Confirming To Is: 15778 Having Thermal Stability For Hot And Cold Water Supply Includng All Cpvc Plain And Brass Threaded Fittings Cpvc Solvent Cement, Trenching, Refilling And Testing Of Joints Complete As Per Firectionof The Engineer In Charge.(External Work (Heavy Duty Sdr 11 Pipe) C)25 Mm Nominal Outer Dia Pipes. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes Confirming To Is: 15778 Having Thermal Stability For Hot And Cold Water Supply Includng All Cpvc Plain And Brass Threaded Fittings Cpvc Solvent Cement, Trenching, Refilling And Testing Of Joints Complete As Per Firectionof The Engineer In Charge.(External Work (Heavy Duty Sdr 11 Pipe) D)32 Mm Nominal Outer Dia Pipes. , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 Including Cutting Of Stone And Making Good The Walls Wherever Required. Kitchen Sink Without Drain Board. With Coupling & All Accessories Complete With Choke Stop Strainer, Plain Type Having Flat Borders For Correct Sandwithing Between The Plaform Top And Bottom Slabs Complete. A)Overall Size 610Mmx510mm (24X20) Bowl Size 545Mmx445mmx200mm (211/2X 17 1/2X 8) Depth 200 Mm. Glossy. 1.0Mm Thk, , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainles Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Two Way Bib Cock With Single Knob And Wall Flange Conforming To Is 8931:1993 15Mm Nominal Bore. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. I)Sch-80(Blue)/(White) A)20Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. I) Sch-40(Blue)/(White) A)20Mm Outer Dia. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bib Cock With Extended Lever Handle And Wall Flange Confirming To Is 8931; 1993 A)15Mm Nominal Bore , Providing Anti - Termite Treatment To Buildings Conforming To I.S.S. 6113 Part Ii 1971 (Revised) Including Adopting Precautions For Health Hazards And Safety Measures As Required Therein With The Cost Of All Materials, Chemicals, Plants, Equipments Required For The Treatment And Furnishing A Guarantee For A Minimum Period Of 10 Years From The Date Of Completion Including Eradicating Any Infestation Of Termite Free Of Cost During The Guaranty Period Complete. (Thepayment Will Be Made On Plinth Of The Building). A)Pre-Construction , Providing Anti - Termite Treatment To Buildings Conforming To I.S.S. 6113 Part Ii 1971 (Revised) Including Adopting Precautions For Health Hazards And Safety Measures As Required Therein With The Cost Of All Materials, Chemicals, Plants, Equipments Required For The Treatment And Furnishing A Guarantee For A Minimum Period Of 10 Years From The Date Of Completion Including Eradicating Any Infestation Of Termite Free Of Cost During The Guaranty Period Complete. (Thepayment Will Be Made On Plinth Of The Building). B)Post Construction , Pvc False Ceiling Grid Type : Providing And Fixing Pvc False Ceiling Consisting Of 600Mm X 600Mm, 5Mm(±0.25) Thick Plain Pvc Sheet Of 600 Kg/Cbm Density Manufactured By An Iso- 9000 Certified Company, Used As Panel Insert In A Frame Work Made Using Anodized Aluminum T- Section Of Sizes 1 X1 (25X25mm, 19 Gauge Or 1Mm Thick) In Square Pattern Of Grid Sizes Of 2X2(600X600mm). The Aluminum Frame Work Is Supported From The Ceiling With The Help Of J Hook And G.I. Wire / 6Mm M.S. Rods Of Required Sizes To Maintain Proper Level Etc. The Aluminum Framework Is Supported On Side Wall With The Use Of Aluminum L-Section Of Size 1X1 (25X25mm) Angles Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacturers Specification & Drawing. , Fabrication And Fixing Of Aluminium Composite Panel Cladding With Thick 3Mm/ 0.25Mm Acp Sheets, Aluminium Framework, With 50 X 25 X1.2 Mm Thick Sections. Silicon Sealants Etc. Including Accessories Complete. , Providing And Laying Laterite Flooring 160Mm Thick With Hard Laterite Stone As Shown In The Drawings, Layed Over Bed Earth, Filling The Joints With Grass, Including As Approved By The Engineer, Etc Complete.Crushing Strength Of Patradevi/Hard Laterite Stone Not Less Than 70Kg/Sqcm , Providing And Fixing Statues (Lion Statue 3D View) Made Up Of Pop Of Size 3.45Ft X 4Ft Including All Fitting Fixtures , Finish Should Be Similar To The Photo Features References,Concepts Of Historic Eras Including All Tools, Plants, Labour And Materials, Leads, Lifts Etc Complete. As Directed By Engineer-In-Charge. , Fabricating, Providing & Fixing Signages Using 304 Grade Stainless Steel 1.5Mm Thick Brushed Steel Finish Plate With Eched Lettering . Ss Plate Of Required Size As Shown In Drawing Will Be Fixed To The Wall/ Door/Wooden Partition With Ss Studs, Complete. Refer Drawing Scspl/Diet/Sign , Supply And Installation Of Dustbin Of Size 15 Dia.And 30Ht. Ndc Or Equivalent,Brown Wood Slated Finish With Pastel Blue Green Lids (Refer Image) Made Up Of Frp Consisting Of Binani Matt Fibres With Gp Resin And Hardener Having A Minimum Of 600 Gsm For Small Size Products Upto 2400 Gsm For Large Size Products For Stability And Durability.Dustbin Must Be Paint By Duco Nc Base Paint Of Choice As Per Ral Code/Duco Catalogue For Good Quality Surface Finish.The Surface Of Dustbin Must Be Smooth Matt Finish. All Tools, Plants, Labour And Materials, Leads, Lifts, Etc Complete. As Directed By Engineer-In-Charge. , Providing And Fixing Of Cast Iron & Frp Benches Made Up Of Cast Iron Powder Coated Frames And Frp Strips Connected To The Frames With Gi Nut Bolt And Gi Clamps Etc. Complete Fitting Length 5 Feet Standard In Size. All Tools Plants, Machinery, Lifts, Transportation Complete. , Supply, Installation,Testing And Commissioning Of 50 Mm X 40 Mm Horizontal Openwell Submersible Pump Having Cast Iron Casing With Cast Iron Impeller, Aisi 410 Shaft. Pump With 5 Hp 2880 Rpm 415 Volts, 50 Hz Ac 3 Phase Electric Motor. Capacity: 270 / 220 Lpm @ 32 / 36 Mtr. Total Head And Digital Control Panel With Float Switch For 2 X 5 Hp Submersible Pumpsets Comprising Of Under Volts / Over Volts Protection, Reversal Phase Protection,Dry Running Protection. , Providing, Installing And Commmissioning Of Aquaguard Eureka Forbes Or Equivalent, Commericial & Industrial Water Treatment Plants Skid Mounted Type Ro Plant Of 500 Litres/Hr Capacity. The Plant Shall House Pressure Sand Filter (Psf) And Activated Carbon Filter (Acf) With The Capacity Providing Fixing 1300 Lph, Reverse Osmosis System With Capacity Of 250Lph, Antiscalant Dosing Sysytem, Micron Cartridge Filter, High Pressure Pump With The Capacity Of 1300 Lph, Uv System And Other Required Accessories Excluding The Cost Of Raw And Clear Storage Tank. All Plants, Equipments, Tools, Machinery, Leads, Lifts Complete. , Providing, Installing And Commissioning Of Water Cooler Of Bluestar Make Or Equivalent With Partial Stainless Steel Material Of 80 Litre Capacity. All Plants, Equipments, Tools, Machinery, Leads, Lifts Complete. , Preparation And Surface Treatment Of Formation. (Preparation And Surface Treatment Of Formation By Removing Mud And Slurry, Watering To The Extent Needed To Maintain The Desired Moisture Content, Trimming To The Required Line, Grade, Profile And Rolling With 8-10 Tonne Smooth Wheeled Roller, Complete As Per Clause 310.) , Scarifying Existing Bituminous Surface To A Depth Of 50 Mm By Mechanical Means (Scarifying The Existing Bituminous Road Surface To A Depth Of 50 Mm And Disposal Of Scarified Material With In All Lifts And Lead Upto 1000 Metres.) , Bituminous Macadam (Providing And Laying Bituminous Macadam With 100-120 Tph Hot Mix Plant Producing Anaverage Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading Premixed With Bituminous Binder, Transported To Site, Laid Over A Previously Prepared Surface With Paver Finisher To The Required Grade, Level And Alignment And Rolled As Per Mort& H Specifications, Fifth Edition For Grading I ( 40 Mm Nominal Size ) , Excavation For Roadway In Soil By Mechanical Means Including Cutting And Pushing The Earth To Site Of Embankement Lead 50 Metres), Including Trimming Bottom And Side Slopes In Accordance With Requirements Of Lines, Grades And Cross Sections.As Per Morth Specification 301 , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification.(A) Size 30 Cm L X 50 Cm H X 15 Cm T , Supplying And Fixing Of Precast Reinforced Cement Concrete Slabs(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) At Site In Concrete Grade Of M-25 With 20 Mm Nominal Size Granitic Or Basaltic Aggregate, Consolidated By Means Of Mechanical Platform, Vibration Etc. With Lifting Hooks Of M.S. 10Mm Bars And Pvc Cups Including Cost Of Reincforcement, Certificate From Manufacturer Shall Be Produced Indicating Grade Of Concret And Minimum Content Of Steel In The Product Along With 5 Year Free Replacement Warranty In Case Of Breakage Complete And As Directed By Engineer -In -Charge. A)Size 900 X 400 X 150 Mm With Steel Reinforcement Not Less Than 7 Kg Per Unit -30 T Capacity , Supplying And Fixing Of Precast Reinforced Cement Concrete Slabs(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) At Site In Concrete Grade Of M-25 With 20 Mm Nominal Size Granitic Or Basaltic Aggregate, Consolidated By Means Of Mechanical Platform, Vibration Etc. With Lifting Hooks Of M.S. 10Mm Bars And Pvc Cups Including Cost Of Reincforcement, Certificate From Manufacturer Shall Be Produced Indicating Grade Of Concret And Minimum Content Of Steel In The Product Along With 5 Year Free Replacement Warranty In Case Of Breakage Complete And As Directed By Engineer -In -Charge. B)Size 700 X 500 X 75 Mm With Steel Reinforcemnt Not Less Than 3.0 Kgs Per Unit , Supplying And Stacking Laterite Stones Of Size 150-200 Mm(Contractors Stone) For Soling At Site , Laying Stone Soiling Including Packing With Smaller Stones And Consolidation With Road Roller Including Spreading, Watering And Consolidating Of Binding Material Murrum Or Earth Etc.(Payment To Be Made For Quantity Of Only Soling Stone Used Excluding Binding Material) , Providing And Applying Tack Coat With Bitumen Grade Of 80/100 Or Bitumen Emulsion Using Pressure Distributor On The Prepared Bituminous/Granular Surface Cleaned With Mechanical Broom As Per Mort&H Specifications Clause 503. , Providing And Laying Bituminious Concrete With 40-60 Tph Drum Mix Type Hhot Mix Plant Producing An Average Output Of 50 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminious Binder To Mix With Filler, Transporting The Hotmix To Work Site, With All Leads Laying With A Mechanical Paver Finisher To The Required Grade, Level And Alignment, Using Antistripping Agent Rolling With Smooth Wheeled, Vibratory Or Tandem Rollers To Achieve The Desired Compaction Complete As Per Mort& Specifications Clause 509 Grade-Ii (13Mm Nominal Size) @ 6.5% Bitumen Of Grade 60/70 Antistripping Agent @ 0.5% Of Bitumen Content , Providing And Laying 30 Mm Thick Bituminious/Asphaltic Concrete With 40-60 Batch Type Hmp Producing An Average Output Of 50 Tonnes Per Hour Using Crushed Aggregates Of Specified Gradings Premixed With Bituminious Binder At 6.5 % By Weight Of Total Mix And Fillerusing Antistripping Agent Transpoting The Hotmix To Work Site With All Leads And Applying A Tack Coat @F 2.00 Kg/10Sq.M. With Hot Bitumen Of 80/100 And Laying With Mechanical Paver Finisher To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory Or Tandem Rollers To Achieve The Desired Compaction As Per Mort&H Specifications Clause 509 And 503 A) Antistripping Agent @ 0.5% Of Bitumen Content , Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Isexclusive Of Surface Applied Glass Beads As Per Irc : 35. The Finished Surface To Be Level Uniform And Free From Streaks And Holes As Per Morth Specification 803 , Electrical Works , Street Light Panel: Supply, Installation, Testing And Commissioning Of Lt Panel Ip- 67 Outdoor Type,Floor Mounted Panels Shall Be Suitable For 415 V, 3 Phase, 4 Wire, 50Hz Supply System. With 3 Phase Energy Meter And 63A Tpn Mcb As Incommer And 8 Nos 16 A Tpn Mcb As Outgoing With Microcontoller Based Programmable Digital Almac Timer With Voltage Stabilizer, Outdoor Body Should Be Powder Coated. As Shown In Sld. , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. A) 4 Core 10 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size.A) 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. A)3 Core 2.5 Sq.Mm , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required.(A) 4 X 10 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required.(A) 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed /Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required.(A) 3 X 1.5/2.5 Sq. Mm. , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge, Sand Cushioning With Screened Sand Bed Of 20Mm Thick, Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(B) In Rocky Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run (The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required.(B) In Rocky Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 400 Sq.Mm In The Existing Reinforced Cement Concrete /Hume / Stoneware Metal Pipe, Etc. Complete As Required , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark,Of Approved Brands, Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. With Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs. D) Refilling The Pit Of Size 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe. G) Watering Arrangement(B) In Rocky Strata , Providing And Fixing 6 Swg Dia Gi Wire On Surface Or In Recess For Loop Arthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supply And Erection Of 8 Mtrs Octoganal Pappeared H.D.G.I Pole Made Out Of 4 M.M. Thick Plate And Heavy Provision For Cable Entry, Having Weight Not Less Than 97Kg. 4 Nos Of J Type M24x 750Mm Long Foundation Bolts Of Grade En 8 As Specified By Ged. Along With Suitable Arm And Led Fixture Of Inled Make Specified By Ged Of 80 W , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. (A) Sp, Cat A , Laying And Fixing With Collars Light Duty Non-Pressure Np 2 Class Reinforced Cement Concrete Pipes With Cement Mortar In Proportion 1:2 (1 Cement : 2 Fine Sand) In Joints Including Cost Of Jointing Material Etc. Complete.A) 300 Mm Dia Pipe , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The Independent Surface/ Recessed Frls Pvc Conduit Of Appropriate Size As Required.(B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The Independent Surface/ Recessed Frls Pvc Conduit Of Appropriate Size As Required.(C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.(C) Group C -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Supplying And Fixing Suitable Size Modular Gi Box With Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 3 Pin 5/6 A Modular Socket Outlet And 5/16 A Modular Switch Connection Painting Etc. As Required.(A) Cat A , Supplying And Fixing Suitable Size Modular Gi Box With Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 6 Pin 15/16 A And 5/6 A Modular Socket Outlet Modular Socket Outlet And 15/16 A Modular Switch Connection Painting Etc. As Required.A) Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required (A) Cat A , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Supply And Erecting Fan Hook Box (100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supply And Erecting Of 56 Inch (1400 Mm Sweep) Ceiling Fan, Double Ball Bearing Type, Complete With All Accessories. (A) Cat A , Supplying And Erecting Led Surface Lights Of 5 To 8 W, 230V Intergral Type With Required Driver And All The Required Accessories Of Legro, Wipro, Crompton, Bajaj, Havels Make Or Equivalet Approved By Engineer - In - Charge Complete As Required. , Supply, Erection,Testing & Commissioning Of 20 - 24 W Led Tubelight Luminaire.With Required Driver And Other Accessories Of Legro, Wipro, Crompton, Bajaj, Havels Or Equivalent Make Approved By Engineer - In - Charge Complete As Required. , Supplying And Fixing Following Way Spn Sheet Steel Mcb Distribution Board 240 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (C) 12 Way Single Door Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. (E) Tpn, Cat A , Supply And Erecting Meter Box Suitable For Three Phase Energy Meter And Incoming Sp/Dp Mcb, Fabricated Out Of 16 Swg Sheet Steel, Powder Coated, Complete As Required And Conforming To The Requirements Of Goa Electricity Deaprtment. , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only.(B) 10 To 40 A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required
Contract Date: Jun 12, 2026 Contract Value : 3.82 Crore
Government Departments No of Bidders 2
50.
Housing Urban and Rular Development #10235078 Price Bid
Tender For New Construction Of Cheriyan Nagar Library Chennai; 1 DISMANTALING WORKS 2 Dismantling etc., all complete 3 Brick / Stone Masonry in lime mortar walls 4 Dismantling RCC by manual / by using deploying machineries 5 Doors and Windows including removal of frames, hinges and fastenings 6 CIVIL WORK 7 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size bouldersand Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum 8 Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 40 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 9 Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 10 Supplying and filling in foundation, basement, etc with filling Gravel inwellrammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 11 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 12 Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls.The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide “Chloripyrifos” and sprayingthe same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II) / 1981 and as directed by the departmental officers. 13 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc.,Rate to include all materials, labour charges, wastages ,placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by theClient / Engineer-in-charge. 14 For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members 15 for plane surfaces such as rectangular or square rcc columns, sunshades, topand bottom slab of rcc boxing, etc. 16 Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members 17 Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. 18 For FoundationandBasement 19 For Ground Floor 20 For First Floor 21 For Second Floor 22 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 23 Supply and constructing Fly ash Brick (230 x 110 x 75mm) masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure usingFly ash Bricks of size 230x110x75mm etc. Rate to include all materials, labour charges, wastagesfor working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 24 For Ground Floor 25 For First Floor 26 For Second Floor 27 Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails. 28 Upto 3 M Height 29 3 m to 5.5 m Height 30 5.5 m to 7.5 m Height 31 7.5 m to 10 m Height 32 10 m to 12.5 m Height 33 Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of P sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 34 Plastering 15 mm thick for external surfaces with Cement Mortar 1:5 (1 of cement : 5 of P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturers Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate includingcost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 35 Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine river sand)according to specifications. Rate shall include for providing GI chicken mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 36 Painting the new plastered walls with two coats for Interior Plastic Emulsion paint approved quality and colour over a priming coat, with two coats of wall putty including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 37 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 38 UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work 39 UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chamberedsections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer before use on work 40 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 41 Painting the new Iron work with two coats of Ready Mixed Enamel Paint of aproved quality and colour over the existing priming coatincluding the cost all materials etc.,complete, in all floors and as directed by the Departmntal Officers. 42 Providing and fixing Vertical blinds , quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete. 43 Supply and laying with best quality the following materials of Ruby Red, Raw Silk Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4’x2’ and above 18mm to 20mm thick Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 44 Supply and laying with best quality the following materials of Sinthetic Grey, Paradise and similar varieties Granite Slabs Granite Tiles - (Superfine Polished with Machine Cut Edges) of size 2’0” x 1’0” and above 10mm Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 45 Nosing for Granite Slab-Single Nosing 46 Grooving the Granite Slab 47 Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Executive Engineer before use on work 48 Paving the floor with design Antiskirt Ceramic tiles (colour and shade as directed) of size 305 mm x 305 mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement. 49 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 50 Supplying and filling the sunken slab area by BRICK-BATCOBA by adding CICO NO:1 of approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Naterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturers specification after entire completion of laying pipes, sanitary fittings etc Rate including all mater aaod and lifts, working materials, labour charges wastages with necessary lead and at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specificatior and as directed by the Client/ Engineer-in Charge 51 Including applying two coats not less than 2 nm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No. 1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturers specifications and as directed. 52 Waterproofing: Providing and Applying CFTRI approvedtwo component flexible polymer modified acryliccementitious waterproofing coating with a mix ratio of(5 Liquid :7 Powder) to the RCC surface of the UGT/OHT tankapplied @ 2.2kg/m2 in 2 coats to achieve1.2mm DFT, having Elongation at break >120% asper ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right anglesof wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completelyas per specification. Followed by applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Mortar on as protective plastering @ 29kg/m2. The material having Compressive strength of 38 MPa at 28 days as per EN 12190, Adhesive Bond Test, >1.5 Mpa as per EN1542, followed by Water curing by sprinkling water for 3 times a day for 5- 7 days. Followed by applyingtwo component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification 53 Finishing the top of roof with one course of Solar Reflective ceramic tiles of size 305 mm x 305 mm x 7 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 54 Supplying And Fixing Rubber Moulded Interlocking Paver Blocks Against Available Edge Restraints 83 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)) 55 Supplying and fabricating of MS structural steel supports for various applications using channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above. 56 Providing Teak wood wrought and put up for frames of doors, windows and ventilators and any other similar joinery works including cost of country wood scantlings and labour charges for manufacturing the frames and fixing hold fasts and fixing in position etc. for all lengths as per architect designs. 57 Best Indian Teak Wood Panelled door in double shutters with frames 100x75mm at side,verticals and top. The shutters shall beof 40mm thick with moulded panels in 20mm thick planks,6Nos.of iron hold fasts fixed in c.c.1:2:4 6Nos.of butt hinges 125mm long including wind appliances, furniture,iron fittings,1No.of iron padlock 15cm long for locking arrangements and fixing inposition,etc.,complete.(ISI STD) 58 Varnishing the new wood work one coat with best shellac and with fine best varnish of approved quality varnish of teak wood natural finish including preparation of surfaces with sand papering in patty priming etc., complete complying with standard specification and as directed by the Departmental officers. 59 Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter 60 Best Indian Teak Wood panelled door shutter for single leaf door. The shutter shall be 40mm thick with moulded panels in 20mm thick planks inclusive of 3 Nos.butt hinges 125mm long,furniture iron fittings,1No.of jappened hooks and eyes 200mm long and 6mm thick and iron pad lock 15cm long including fixing inposition,etc.,complete 61 FALSE CEILING WITH GYPSUM PLAIN TILES Providing and fixing true horizontal level false ceiling using SAINT -GOBAINGYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at1200mm c/cmax by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying 62 Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), including putty works. 63 Supplying and Fixing of English Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 64 Supplying and Fixing of Tamil Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 65 upplying and Fixing ofEmblem (15”) Stainless Steel size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 66 Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges. 67 Supplying and erecting in position LIGHT DUTYSTEEL TRUSSES as per the drawing.The materials and design of the trusses should confirm to the relevant Indian Standard specification.The trusses shall be procured only from reputed manufactures oftrusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design.The rate quoted shall include the cost oftrusses.Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc.,The roof sheeting shall project 0.762m from the eves purlins. 68 Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. 69 Providing, supplying, and fixing factory-manufactured pre-fabricated insulated roofing panels made of PUF (Polyurethane Foam) sandwiched between two metal skins, comprising pre-painted galvanized iron (PPGI) sheets of 0.5 mm thickness on both sides with 40 mm to 50 mm thick CFC-free polyurethane foam core of minimum density 40 kg/m³, having tongue and groove jointing with cam-locking arrangement for weather-tight sealing. Panels shall have minimum overall R-value of 6.5 and thermal conductivity not more than 0.022 W/m·K. Roofing to be supported over structural purlins/trusses using self-drilling screws with EPDM washers, sealants, fasteners, ridge covers, and flashing, complete. Rate includes supply, transport, hoisting, cutting to size, edge finishing, foam taping at joints, sealing, labour, tools, scaffolding, and all incidentals for a fully finished, insulated, and weatherproof roofing system as per manufacturer’s specification and as directed by the Engineer-in-Charge. 70 Brick Wall Cladding Nuvocotto Edge Cut Wall Tiles Natural Red finish in size 230mm x 76mm x 15mm 71 Brick JalliNuvocotto Camp Jallie Natural Red finish in size 200mm x 200mm x 60mm 72 Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT 73 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 74 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 75 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 76 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 77 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 78 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 79 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,. 80 PLUMBING 81 Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, unioncoupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. 82 Supplying and fixing Stainless Steel Health Faucetwith all the accessories etc, 83 Supply and fixing White without PedastalWash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia B Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples,15mm CP Pillar Tap etc (The wash basin should be got approved by Executive Engineer before use on works). 84 Providing and fixing C.P. Angle stop cock of approved quality conformingto IS:8931 :15mm nominal bore 85 Providing and fixing Brass Chromium Plated Towel Rail 60cm long and20mm dia with Brackets etc,. 86 Providing and fixing Brass Chromium Plated Soap Tray of size 150mm x 100mm 87 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines. 88 75 DIA 89 110 DIA 90 Providing, fixing and testing of PVC waste pipe of agricultural sereis conforming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. 91 40 DIA 92 Providing, fixing and testing of PVC floor- trap 110 dia with necessory of multitrap connection (heavy duty hinged type) with brass CP frame & cover (100 mm x 75 mm). Trap of 100 mm dia inlet and 75 mm dia outlet fixed on a bed of cement concrete etc.complete. (The frame and grating shall be approved by Architects) 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Concealed On Wall) 94 20MM DIA 95 25MM DIA 96 Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 97 25mm dia Cost of gate valve 98 32mm dia Cost of gate valve 99 Providing, installation, testing and commissioning approved make CIY-type Strainer conforming to IS standardwithnecessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications. 100 32 mm nominal bore 101 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines.(Pipes Runningin the Shaft & below ground level) 102 75 DIA 103 110 DIA 104 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Pipes Runningin the Shaft & below ground level) 105 25MM DIA 106 32MM DIA 107 Providinging and fixing in position PVC Vent cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before use on works). 108 75MM DIA 109 110MM DIA 110 Providing and fixing GI. puddle flanges (IS; 1239) fabricated out of 6 mmthick M.S. plate of size 300 x 300mm plusdia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized.(Rate As per Quotation) 111 32 mm dia 112 40 mm dia 113 50 mm dia 114 65 mm dia 115 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:(Rate As per Quotation) 116 Constructing in site of Inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm ,Heavy duty RCC precast cover (SFRC), benching in CC M-15, internalfaces plastered smooth in CM1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge. 600x600 mm size internal and depth will 450mm to 1200mm & 900x800 mm size internal and depth will 450mm to 1200mm. (Rate As per Quotation) 117 600x600 118 Making of core cutting in RC slab of maximum 150mm thick of following diameter. 119 a) 150 mm dia 120 b) 125 mm dia 121 Providing and fixing MS slotted angle iron brackets, hangers, MS grip bilts,universal clamps with thereaded rod,supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc., as per detailed drawing for supporting soil, waste and rain water pipes and water Providing pipes in shafts with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls/outer walls etc., The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08 mm thick conformed to IS 1239 etc., complete as directed by the employer. 122 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.(600x600mm) 123 Providinging, installing, fixing, jointing, testing and commissioning of PVC Storm water pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste,The quoted rate shall include necessary earth work, fittings,pipe to be laid below ground level in trenches upto required depth, dewatering, jointing of pipes, water testing and setting,refilling, and making good the same complete as required. 124 110 DIA 125 Providing, fixing and testing of Terrace Rain water outlet (110dia) with all the accessories etc,. 126 INTERIOR 127 BOOK SHELF 1 - 2100 x 400 x 2100 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 128 MAGAZINE HOLDER - 600 x 250 x 1200 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 129 DISPLAY UNIT AT RECEPTION - 1200 x 300 x 600 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 130 LEDGE 5000 x600 x 750 Panels are 16mm MR ply with 1mm Matt Finish on both sides with 2mm PVC Edge Band finish mounted to the wall. 131 4SEATERLEARNINGCENTRETABLE-2000mmx1000mmx750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thick 132 6SEATERLEARNINGCENTRETABLE-2400mmx1000mmx 750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thic 133 READING CHAIR - Lounge Chair Uphostered in EPU Leather. Sleek Four Star Fixed Base With Revolving Function In Warm White Powder Coated Finish. Three Dimensional Lumbar Support Design. Model number SCML-SF30.1. Bosses Cabin or equivalent. 134 ROLLINGCHAIRS-Medium back chair with metal grey back frame, metal grey adjustable PU armrest (4D), moulded foam seat with metal grey shell, STG drive-by-wire mechanism with 4 position locking, polished aluminum alloy five-star base with metal grey PU castors. Model number CHT66SW. Bosses Cabin or equivalent. 135 SINGLESTUDYCHAIR:Multi-Purpose Chair Upholstered In Water Based PU Leather. Cushioned Seat and White Ash Solid Wood Legs. Model number SCMF-XCB33 - Latte Brown. Bosses Cabin or equivalent. 136 LOCKER & FOOTWEAR STORAGE- – 1950x375x470mmPLU main 2 DR numeric lock with envelop slot – 1950x375x470mm. Godrej interio or equivalent. 137 RECEPTIONDESK-1800mmx650mmx 1050mm- Reception Table In Matt White and Oak Laminate. IncludesStorage Cabinet and WireManagement Grommet OnDesk. Top Model number 28ROB003(BCRMB-OB 03). Bosses cabin or equivalent. 138 Seamlessly shift from warm, cozy tones to cool, vibrant whites (also known as tunable white or human-centric lighting) is an advanced JS3 Serial LED Connecting System LED lighting technology that allows users to adjust the color temperature of the light output — from warm to cool — to suit mood, time of day, or functional needs.LED Type: OSRAM SMD 3030Iceil™ Supply of OSRAM 24V LED Module Color Temperature: 2700K to 10000K with Iceil IP67 Drivers CRI: ≥90 – Delivers natural, true-to-life color accuracyMounting: High-performance aluminum rigid PCB– Ensures excellent thermal management and long lifespanConfiguration:– Each block features 4 high-quality LEDs– Optimized light spacing for shadow-free illumination– Viewing Angle: PMMA lens Ultra-wide 160° beam spreadDimmable: No Compatibility:DALI, Tuya Smart App, Alexa, & Google Home. Touch Panel, and RF Remote control optionsPower Consumption:– Only 4-6W per sq.ft– Energy-efficient yet high-lumen outputLighting Quality:– Uniform light diffusion across the stretch ceiling– Suitable for both translucent and printed membrane typesIceil™ Power Supply: Wide Input Range 100-305AC (Class I), Surge Protection with 6KV/4KV, Working temp. -20~ +45°C 20% ~ 90%RH, Metal case IP67, Power factor <0.98LED and Power Supply Warranty: 5 Years or 50,000 Hours (whichever comes first)Certifications: CE & RoHS Certified – environmentally safe and globally compliant Installation of pre-supplied LED lighting fixtures, associated drivers, and control systems, including all necessary mounting, wiring, terminations, and system integration by qualified technicians.The scope includes:Installation of LEDs as per lighting layoutMounting and secure placement of LED drivers and control gear in accessible locationsElectrical connections between LEDs, drivers, and controllers using appropriate cablingTesting of each circuit and commissioning of the full lighting setupRate Includes: Skilled labor, tools, basic fasteners, and all on-site installation efforts.. 139 Iceil™ supplies exclusively premium-grade of European Standard PVC Thermo-Stretchable Membrane, complying with BS1-D0 as per EN 13501-1 and Class A as per ASTM E84-2024 fire safety standards. The membrane is precision-cut to the required shape and size, with perimeter edges high-frequency welded with harpoon inserts. Installation is carried out using a durable aluminium profile framing system, ensuring a seamless, secure, and aesthetic ceiling solutionThickness 0.18 mmWeight 250–300 gsm ± 2%Light Transmission Up to 75% (for translucent type)Width Up to 5 meters (seamless); larger areas joined with invisible seamsStretching Method Thermal installation at ~50–60°C using hot air gas blower Fire Rating BS1-D0, as per EN 13501-1, ASTM E84-2024 Class A Explanation: B = Very limited contribution to fire, s1 = Little or No Smoke Production, d0 = No flaming droplets or particles Moisture Resistance 100% Moisture-proofUV Resistance Yes – does not yellow or degrade indoorsEnvironmental ROHS compliant, Phthalate-free, UL Certified - Tri-O-cresyl phosphate < 50mg per kgCertification Manufactured in ISO 9001:2015 certified factoryWarranty 10 Years (under standard indoor conditions) Installation of pre-supplied Stretch Ceiling System, including site preparation, profile fixing, membrane stretching, and finishing using specialized tools and skilled labor.The scope includesFixing of aluminum/PVC perimeter profiles as per approved ceiling layoutHeating and stretching of the pre-cut stretch ceiling membrane on-siteAlignment, tensioning, and seamless fitting of membrane onto the installed profilesIntegration of cutouts for lighting, sprinklers, air conditioning vents, speakers, etc.Final finishing, cleaning, and handover of installed ceiling areaRate Includes: Skilled labor, installation tools, on-site execution, and necessary accessories for completing the installation of the stretch ceiling. 140 The Iceil Wooden Box is built from durable MR/BWP-grade plywood, featuring a 12mm back board, 18mm vertical sides (150mm height), and dual 8mm flexible plywood layers for curved designs. The 150mm depth accommodates lighting and structural needs.Finish Options: White emulsion or PU-coated interior, or white reflective laminate; exterior customizable per client.Mounting: Reinforced corners, cross supports (wood/MS) every 2 ft, fixed with dash fasteners, threaded rods, or MS supports.Stretch Ceiling Compatibility: Suits Iceil’s PVC Harpoon Profile System with aluminium profiles for welded membranes.Lighting Integration: Base for rigid block LEDs with ventilation slots for heat dissipation. 141 Wall paper 142 Carpet Flooring 143 160A LT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, Wall mounted, single front,14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars,internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The Breakerof 160A TPN MCCB and 1set of 160/5A CT with TNEB Metering provision and 1nos of 160/5A CT for APFCR . (Rate as per Quotation) 144 Supply and Erection of electrical panels Boards 145 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type Three Phase Changer Over panel of size (H 2100 X L 2000 X D 300 ) mm with suitable to accommodate 100A 4 pole Three phase Change Over Switch-1No. as incomer for EB Source and as incomer for DG Source, 6nos of 63A 4Pole MCCBs and 4nos of 32A 4Pole MCCBs compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 146 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type 50 kVAR panel of size (H 1800 X L 1800 X D 300 ) mm with suitable to accommodate Incomer 1 Nos 63A 4Pole MCCB, 7nos of 25A 4Pole MCCBs with 7% 1-10 kVAR Capacitor banks in compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 147 VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixingof4way verticalTPMCBsheetsteel Industrial Type TP MCB DB with IP54 Protection of surface type fitted with bus bars and neutral links with1 No. of 63A FP MCB as Incoming and 4 Nos.of32A,10KA Triple Pole MCB in Flush with wall and making good of the concealed portion with earth connection.( Industrial Type TPMCB DB with IP54 Protections) 148 Supply and fixing of 7 segment8 way63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic doorcover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 63 A TPN MCB, 10kA, / Isolator and another separate 4 way for accommodating one no. 63 Amps, 30 mA, 4 pole ELCB / RCD (totally 8 ways in one segment) and 24 nos 6-32 A, 10kA, SP MCB / Isolators ( totally 24 nos.) for outgoing in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. withthe following in flush with wall with earth connection only. 149 Supply and fixing of 65 mm dia. (2 -1/2) GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonry pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 90W LED Streetlight fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour 150 Supply and Fixing of24W Ceiling Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 151 Supply and Fixing of11W Bulk Head Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 152 Supply of surface-mounted 24W LED wall lights to the ideal solution for a variety of indoor lighting applications. Direct illumination of the wall and surrounding surface, as well as accent lighting for vertical structures. Featuring an aesthetically pleasing, robust construction, these lights are built to withstand all weather conditions, ensuring long-lasting performance and durability • Luminaire body made of extruded aluminium alloy (grade 6063) with die cast aluminium components and non corrosive SS fasteners • Non yellowing UV stabilized translucent polycarbonate diffuser • Luminaire integrated with 24W LED • Die-cast aluminium mounting base for easy installation onto the wall • Surface mounting on wall using hardware after connecting to the power supply • IP : 65, IK : 08 • Cable entries for through-wiring of mains supply cable • Integral constant current power supply • CRI ( Ra) : >80 • Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply • Available CCT : 2700K, 3000K, 4000K, 5700K. Driver Power Supply : Integral, Input Voltage : 230-240Vac, Frequency : 50-60 Hz, Power Factor : ≥0.95, THD : <10%, Surge Protection : 4KV, Efficiency : >85%, Symmetrical Light Distribution.Product Finish options: Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. CE & BIS Certified. Inhouse NABL accredited lab. Brand Name : Philips, Product SKU : 919215850004 153 Supply of LED Linear Pendant luminaire is a versatile solution for projects that demand high quality of the lighting system and high visual comfort. With its modular design, the Revo-L can be used as an individual fixture or as a combination of luminaires put together in continuous lines • Luminaire made of extruded aluminium for better thermal management • polycarbonate diffuser for optimum optical performance, • Hexa-cell (Matte Black) secondary reflector • Suitable for surface and suspended mounting • Supplied with standard suspension kit (1metre).• Cable entries for through-wiring of mains supply cable • Integral power supply • Suitable for operation on 240V,50Hz single phase ac supply• Driver Power Supply : Integral, Power Factor : >0.90, THD : <10%, Surge Protection : 4KV-6KV, Efficiency : >85%, IP 44 Rating.• Dimension: 1188 x 36 x 75, 2365 x 36 x 75, 3540 x 36 x 75.• Wattage Options : Upto 40W, Upto 80W, Upto 120W.• Mounting: Pendant Mounting, Pendant Mounting, Pendant Mounting, Surface Mounting, Surface Mounting, Surface Mounting • Product Finish options: Pure polyester powder coated, RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 9016 Traffic White • CE & BIS Certified • Inhouse NABL accredited lab. Philips SP170P LED25S-6500 PSU W5L113 OD WH Smartbright Linear 154 Supply of Input power : 8W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire madeof extruded aluminium alloy (grade 6063), die-cast aluminium of high corrosion resistance and non corrosive stainless steel fasteners. Translucent polycarbonate diffuser. Pressure die cast aluminium mounting plate Ø100.5mm x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD55 for surface mounting on floor. The base plate have a cable entry hole of 70 x 24 mm dia at the center. Single cable entrance via PG7 cable gland. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 2.5KV. Luminaire dimension : 106mm diameter x 565mm height. CE & BIS Certified. Foundation Bolt - 2 Nos of M8 Foundation J Bolt Length 150mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each BoltInhouse NABL accredited lab. PHILIPS Bollard BCP100 LED 10W PSU GR L 750mm Solar Light 155 Supply of LED Linear Lighting to suit ceiling / wall is a slim and elegantly designed fixture, suited for varied applications offers a uniform, glareless and soft lighting.Al. Profile Housing Dimension: 1000 x 17 x 8, 2000 x 17 x 8Mounting: Surface Mounting, Product Finish: Anodized Aluminum• Luminaire made of extruded aluminium for better thermal management • PC clear / semi clear matte diffuser for excellent diffused lighting experience throughout the life of the fixture • Designed for mounting on ceiling / wall • Cable entries for through-wiring of mains supply cable • To be used with LED strip & power supply unit of suitable rating. Brand Philips Profile Shine 240 LEDs/m LED Strip | 3000K Warm White | High Brightness Linear Strip for Cove, False Ceiling, Architectural, Ambient Lighting 156 Supply of 24V 2835 Flexible LED Strip, 12W/m, Non-Integral, CCT: 2700K, 4000K, 6500KDimension: 5m / Roll, IP : 67, Brand Name : K-Lite, Code : 7289 or equivalent 157 24V Power supply, IP 67 Rated SMPS suitable for 24V LED Strip lights. Wattage: 150W, 24V Series Waterproof IP67 Power Supply24Vdc 6.25 Amps 150W Power unitDimension: 313 x 43 x 34IP : 67,Brand Name : K-Lite, Code : 8198 or equivalent 158 Supply and fixing of Fans and Air Circulator 159 Supply and fixing of 1200mm (48) sweep AC ceiling fan 5 star rated complete ( Higher end)with 2 module 100W fan step regulator (Higher end)with 2.5 metre down rod with fan clamp, and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 160 Supply and fixing of 600mm wall mounting Air circulator and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 161 Supply and fixing of 300mm(12)sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessaryaccessories and hardwares as required. 162 Supply and fixing oflouvers shutter arrangements for 300mm(12)sweep (Heavy duty) AC Exhaust fan complete 163 Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required. 164 Supply and Laying of 3 1/2 x 50 sq.mm. PVC Al.Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 165 Supply and Laying of 4C x 16 sq.mm. PVC AL. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.Main Panel to DB 166 Supply and Laying of 3C x 2.5 sq.mm. PVC Cu. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodMain Panel / DB to Street Lights 167 Supplying & Laying 120mm/103.5mm HDPE Pipe as per requirements including excavation & refilling. 168 Supply and fixing of double compression brass cable gland for following Aluminium conductorXLPE insulatedarmoured cable of 1100 V grade with earth connection. 169 Supply and fixing of brass cable gland for3 1/2 Cx 50 Sq.mm PVC LTUGAl. Armoured cable with earth connection 170 Supply and fixing of brass cable gland suitable for4C x 16 PVC Al. Armoured LTUG cable with earth connection. 171 Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cableLTUG cablewith earth connection. 172 Supply and providing cable end termination of the following sizePVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable) 173 Supply and providing cable end termination of3 1/2Corex 50Sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. 174 Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. 175 Supply and providing cable end termination of 3C X 2.5 SqmmPVC LTUGCopper cable with necessary copper cable sockets by crimping etc, with electrical connection complete. 176 Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End (SD-375) 177 Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil)Higher End (SD-385) 178 Supply and fixing of 25A Flushtype Wall Socket 25A DPMCB complete set for ACPlug inflush with wall with earth connection (For AC Plug) 179 Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigidpipe Concealed inwall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copperwire and making good of the concealed portion withsuitable colour. ( SD 430 ) 180 Supply and Run of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe onconcealed wall and ceiling with continuous earth wire connection with painting of suitable colour. 181 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp andwithcopper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonrySD-233 182 Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection 183 Supply and Run of 1 of25.6.25 mm Al. Flat on wall / floor / ground for earth connection. 184 Supply and Run of 1 of25.6.25 mm Cu. Flat on wall / floor / ground for earth connection. 185 Supply, Installation, Testing and commissioning of 40 channel NVR with 4TB HDD * 4nos, Up to 40-ch 8 MP IP cameras can be connected, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by up to 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1/VGA1 outputs provided  HDMI1 Video output ) resolution Storage and Playback, Up to 4SATA interfaces and 1 eSATA interface for HDD connection, Support upto 6TB capacity for each HDD, Smart search for efficient playback.(Make: Hikvision/Dahua/Panasonic) 186 Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse.All including suitable camera stand and accessories. (Make: Dahua/Panasonic) 187 Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Dome Each Cameras, 1/2.8 CMOS,4 MP 2592 x1520 or better , triple stream, Min. Illumination required 0.005 Lux/F2.0 (Color,30IRE), 0 Lux/F2.0 (IR ON), 140dB True WDR, triple stream,3 to 12 mm, F1.4 to 2.8 , MFZ, Backlight Compensation, Highlight Compensation 3DNR, Privacy Mask, Internal/External Smart IR LEDs with up to 50m IR distance, H.265& |MJPEG, Inbuilt Video Analytics: Smart Motion Detection, Intrusion Detection, People Counting, Multiloitering, Face Detection, Line Crossing, Missing Object detection, [Unattended Object Detection. THe camera shall have inbuilt cyber security FIPS Chipset.Audio Stream Full Duplex, 1TB SD card support, IP 67 & IK10, Alarm: 1 In & 1out, PoE, H.265 High Profile and MJPEG, PoE Class . Certifications: ONVIF Profile S,G,T & M compliant, NDAA 889 UL, CE, EN, FCC & RoHS compliant and with all accessories and as per detailed tender specifications. 188 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). 189 Supply and Clamping of CAT 6 armoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant.Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylenev. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 190 Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point( Point to Point ) Crimping, Testing and arrangement charges. 191 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. 192 Supply and Fixing of Rack with Accessories -Higher end 12 U Rack with LNS unit and fan extra for the above rack. 193 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 194 PA SYSTEMS 195 Supply,installation, testing and commissioning of 30W High efficiency ABS horn loudspeaker with weather protectin IP 65Max Power : 45 W, Rated power, 30 Watts, Power tapping, 30/15/7.5W-Effective frequency range (-10 db) (-380 Hz to 5 kHz) - SPL at rated power (1 khz) 126 dB- Self extinguishing acc. to UL 94 VO - IP 65 acc. to IEC 60529, safety acc. to EN 60065. (Make - BOSCH) 196 Supply, installaion, testing and commissioning of 240W mixer amplifier with following features : inbuilt bluetooth for audio streaming, sports audio playback from USB pen drive, 4 microphone/line inputs, plus music source input, insert features to use as a pre/power amplifier, Optional 2 tone chime generation for input 1 technical specifications - Frequency response 80 Hz to 18 kHx (+1/-3 dB W - 10 dB ref. rated output) - Distortion <1% @ rated output power, 1 kHz bass control Max +/- 8 dB Treble control max +/- 8 dB. (Make - BOSCH) 197 Supply, installation, testing and commissioning of Goose Mic 198 Supply and installation ofHandheld microphone with a dynamic transducer element that shall be designed for high speech intelligivility. It should have a rugged enclosure is both stylish and easy to use in a wide range of public and sound reinforcement applications. Polar Pattern unidirectional, frequency range 80 hZ to 12 kHz, Sensitivity 1.7mV/Pa +/- dB, Rate out impedance 600 Ohms. (Make BOSCH) (Market rate) 199 Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers. 200 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 201 Supply and erection, testing and commissioning of 2.0 TR (6000K.cal/hr) ABS Split type Air conditioner (3 star rating)confirming to IS : 1391(part-2) 1992 with Admt No.1 fitted withhermetically sealed air compressor operating on refrigerant R-410A suitable for wall mounting for operation on 230V 50 HZsingle phase AC supply inverter technology with capable of thefollowing performinga) Coolingb) Dehumidifyingc) Air circulatingd) Filteringe) Refrigerant pipe lines – 6 mtr lengthThe installation works for the above split type AC units includethe following1. Mounting / fitting indoor and outdoor units at theirrespective locations2. Laying refrigerant pipe line of required length notexceeding 6 meters distance & connecting both units afterdrilling hole/holes in the wall is required, thickness of the coppertubing shall not be less than 0.7 mm3. Installing the section pipe with expanded polythene foamtubing4. Laying drain pipe to throw out the condensate water beingformed within indoor unit5. Leak testing the entire system unit6. Charging refrigerant gas in the unit7. Suitable electrical wiring with to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoorunit upto 6 meter length and upto switch within 3 meters oflocation of indoor unit. (Like (Carrier / Voltas / Blue Star /Equivalent) as directed by the department officers 202 Supply and fixing of 5 KVA slim and wall mounting (V Guardmake ) double booster voltage stabilizer for operation on 170-230V 50Hz single phase AC supply capable for 2 TR split ACwith necessary inter connection and earth connection as directedby the departmental officers. 203 LANDSCAPE 204 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 205 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 206 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 207 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 208 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 209 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 210 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
TenderDetail
Loading tenders