View Bid Results For Power Generation And Transmission Tenders

We found 114 Bid Results related to power generation and transmission tenders. You can find Contractor details who won power generation and transmission tenders along with contract details in Bid awards announcements section.

Indian Tenders
7
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
3
Live Opportunities Worldwide
Filters
Stage
85
17
12
Tender Publishing Platform
25
89
State / UT
24
20
19
12
10
8
6
5
4
4
4
2
2
2
2
2
2
2
2
1
1
1
1
1
1
Contract Value
36
20
42
13
Publish Date
0
0
0
0
0
Sector
15
38
19
10
9
8
7
6
4
4
3
2
1
1
1
1
Ownership
5
65
30
12
6
1
Within keyword
Active filters:
Showing 1–3 of 114 tenders matching your filters
1.
Educational and Research Institute #11299551 Price Bid
Tender For Supply Of Library Books , Library Books (Refer Nit) , Industrial Safety And Human Behaviour Kaila 9788174734532 , Engineering Mechanics Vela Murali Bks456005 , Earthquake Resist Design Structural Shashikant Dugg Bks643652 , Surveying And Levelling Subramanian 9780198085423 , Practical Railway Engineering, 2Nd Ed Clifford Bonnett 9780000990136 , Geographic Information Systems Gis For Disaster Management 2Ed Brain 9781032552460 , Design Of Structural Elements Chanakya 9781138046436 , Wind Loading Of Structures 3Rd Edition John D. Holmes 9780367241803 , Structural Analysis 3/Ed Menon 9788184877342 , Concrete Pipes And Pipelines Joshi Bks426990 , Strength Of Materials Basavarajaiah 9788173714580 , Geotechnical Engineering Debashis Moitra 9788173719905 , Textbook Of Environmental Studies For Undergraduate Courses 3 Ed Bharucha 9789389211788 , Intelligent Transportation Systems Srinivasa Kumar 9788195400928 , Transportation Engineering Srinivasa Kumar 9789389211160 , Structural Analysis With Finite Elements Hartmann 9788132208945 , Strength Of Materials Vol 1 Binu Sukumar 9789388005029 , Geospatial Technology Dwivedi 9789380381480 , Heavy Metal And Metalloid Contamination Of Surface And Underground Water Gupta A. 9781032728582 , Fundamentals Of Environmental Engineering Danny D Reible 9781566700474 , Computer-Aided Highway Engineering S Goswami 9781032728483 , Fundamentals Of Hydrology Davie 9781032251936 , Highwall Mining : Applicability, Design & Safety Porathur J. L. 9781032728919 , Environmemtal Pollution Control Engineering 4Ed Rao 9788122472288 , Plane Surveying 3Ed Chandra 9788122438802 , Design Of Reinforced Cement Concrete Vol 1 Structural Elements Bhavikatti 9788122440515 , Strength Of Materials, 2/Ed Jindal 9789352861521 , Fundamentals Of Hydraulic Engineering Sy Houghtalen 9789332507593 , Geotechnical Engineering Coduto,Yeung 9789332587427 , Strenth Of Materials Jindal 9788131759097 , Dynamics Of Structures 2Nd Ed Jain 9789357059350 , Finite Element Method With Cd Eldho Desai Shah 9788131724644 , Soil Mechanics And Foundation Engineering Purushotama Rai 9788131790816 , Engineering Mechanics - Statics & Dynamics Shames Rao 9788177581232 , Dynamics Of Structures In Si Unites 5Ed Chopra 9789353945251 , Elementary Engineering Hydrology Deodhar 9788131708057 , Environmental Studies Basak 9788131721186 , Introduction To Finite Elements In Engineering 5/E Tirupathi 9781009461818 , Strength Of Materials Rao 9781108454285 , Plumbing Engineering Nikhil Anthony 9788119365128 , Fundamental Of Ground Improvement Engi Prof.Dr.R.K. Khit 9788195916948 , Surveying And Levelling : Part - 1 Kanetkar Kulkarni Bks644037 , Surveying And Levelling : Part - 2 Kanetkar Bks644038 , A Textbook Of Strength Of Materials Rajput 9789355010704 , Building Construction Bhavikatti 9789325960794 , Fundamental Of Reinforced Concrete Chandra Bks498526 , Irrigation Engineering And Hydraulic Structures Sharma Bks535826 , Surveying I Anne Mary 9788183717304 , Highway Engineering Subramanian 9788183716888 , Strength Of Materials Bansal Bks534222 , Reinforced Cement Concrete Design (Reinforeced Concrete Structures) Punima 9788131809426 , Building Construction Rangwala Bks502124 , Civil Engineering Drawing Rangwala Bks440591 , Soil Mechanics & Foundation Engineering Modi 9788189401306 , Engineering Materials Rangwala Bks385325 , Bridge Engineering Rangwala Bks554100 , Harbour Dock And Tunnel Engineering Srinivasan Bks502125 , Solid Hazardous Watse Management 2Ed Rao 9789389354621 , Textbook Of Remote Sensing And G.I.S 4Ed Reddy 9789381075975 , Reinforced Concrete Design P.B Sharma 9789391910419 , Energy Environment Ecology And Society Anil Kumar 9788178002576 , Solved Problems In Geotecnical Engineering Sharma 9789395038478 , Highway Engineering Suganthi Bks411034 , Highway And Railway Engineering Santhanam Bks638485 , Construction Materials & Tech Mathankumar Bks638450 , Prefabricated Structures Soundrarajan Bks638488 , Structural Analysis-I Santhanam Bks479564 , Green Building Design Molykutty Bks503088 , Irrigation Engineering Basak 9780074635384 , Estimating Construction Costs Peurifoy 9780071239455 , Design Of Steel Structure Duggal 9780070260689 , Concrete Technology Gambhir 9781259062551 , Engineering Mechanics Timoshenko 9781259062667 , Flow In Open Channels Subramanya 9789353166298 , Reinforced Concrete Design 4Ed Pillai 9789354601026 , Surveying Vol - Ii 5Th Edn Duggal 9789353167523 , Surveying And Levelling Basak 9789332901537 , Prestressed Concrete 6Ed Krishna Raju 9789387886209 , Fluid Mechanics White 9789355322043 , Strength Of Materials Rattan 9789385965517 , Surveying Vol - 1 Duggal 9789353167509 , Environmental Studies-3Ed Joseph 9789352605170 , Construction Planning, Equipment Peurifoy 9780070706996 , Fluid Mechanics Fundamentals And Applic Cengel 9789353166212 , Schaums Outline Of Finite Element Analysis Buchanan 9789389691375 , Wind Energy Theory And Practice 3Ed Ahmed Bks662294 , Bituminous Road Construction In India Kandhal 9789391818821 , Mechanics Of Composite Structures Vasiliev 9781138582101 , Satellite Towns In Neometropolitan Development In India Amit Chatterjee 9789811932052 , Sustainable By Design Walker 9781032973685 , Management Of Quality In Construction Ashford 9781138607163 , Disaster Managament 2/Ed Pandey 9789357461610 , Remote Sensing And Image Interpretation Thomas Lillesand 9789354642104 , Composite Structures Of Steel And Concrete 3Ed Johnson 9788126539819 , Strength Of Materials 2Nd/Ed Debabrata Nag 9788126534876 , Reasoning Ability And Quantitative Aptitude Tcy Online 9788126559008 , Green It Strategies And Applications Using Envir Intell Bhuvan Unhelkar 9781032054025 , Bioenergy For Sustainability And Security Behera 9789381891438 , Textbook Of Engineering Geology Annadurai 9789385259937 , Structural Dynamics Mukhopadhyay 9788180520907 , Matrix And Finite Element Analysis Mukhopadhyay 9788180520754 , Irrigation Engineering & Hydraulic Structures Suresh 9789383656899 , Strength Of Materials 2Ed Vendateshan 9789383656646 , Concrete Technology Job Thomas 9788131526682 , Steel Design Segui 9788131526651 , A First Course In The Finite Element Methods Logan 9789353507855 , Civil Engineering Materials Sivakugan Tuladhar 9789386650382 , Soil And Water Conservation Engineer Fangmeier 9788131524985 , Principles Of Foundation Engineering 9Th Ed Das 9789355738110 , Elements Of Civil Engineering Balasubramanya 9789387511576 , Soil Mechanics & Foundation Engineering Huat Prasad 9788131529591 , Principles Of Foundation Engineering Das 9789386650955 , Analysis Of Structures On Elastic Tsudik 9788131518953 , Strength Of Materials : Mechanics Gupta 9789355737717 , Steel Design With Mt Segui 9789386650887 , Prestressed Concrete Structures, 6Ed Dayaratnam 9788120417915 , Fundamentals Of Reinforced Cement Concrete Designs Gahlot 9789385915611 , Instrumental Methods Of Analysis Willard 9788123909431 , Tb Of Soil Mechanics And Foundation Engineering:Geo Technical Engg Murthy 9788123913629 , Civil Engineering Through Objective Type Questions 3Ed Gupta 9788123907970 , Advanced Reinforced Concrete Design 3Ed Raju 9788123929606 , Design Of Reinforced Concrete Structures 4Ed Dayaratnam 9788120414198 , Structural Dynamics Paz 9788123909783 , Modern Prestressed Concrete Libby Bks465269 , Textbok Of Solid Wastes Managemnt Khan 9788123909448 , Analysis & Design Of Substructures, 2Ed Swami Saran 9788120417007 , Building Repair And Maintance Management Gahlot 9788123912431 , Advanced Foundation Engineering Murthy 9788123915067 , Modern Construction Management 7Ed Harris 9788126572298 , Groundwater Hydrology Rushton 9788126539772 , Textbook Of Highway And Traffic Engineering Saxena 9788123924175 , Airport Engineering Saxena 9788123915500 , Construction Dewatering And Groundwater Control 3Ed Powers 9788126541669 , Quality Management Of Cement Concrete Construction (Pb) Gahlot 9788123916989 , Tb Of Water Supply And Sanitary Engineering Husain 9788120416833 , Design Of Bridges 5Ed Raju 9788120417984 , Essentials Of Bridge Engineering 6Ed Victor 9788120417175 , Building Construction Handbook Chudley 9789381269169 , Design And Construction Of Concrete Shell Roofs Ramasamy 9788123909905 , Strength Of Materials, Vol-Ii:Advanced Theory And Problems Timoshenko 9788123910772 , Construction And Project Managment 2Ed (Pb 2018) Krishnamurthy 9789386217790 , Water And Wastewater Calculations Manual 2Ed Lin 9789353162863 , Design Of Stell Structures Abu-Saba 9788123905389 , Prestressed Concrete Problems And Solutions Raju 9788123925424 , Water Resources And Irrigation Engineering Ganesaguru Bks588955 , Dam Engineering Asthana 9789381891469 , Sedimentary Rocks In The Field A Colour Guide Stow 9781874545699 , Soil Mechanics Basic Concepts & Engineering Aysen 9780415383936 , A Tb Of Fluid Mechanics And Hydraulic Machines Bansal Bks493063 , Intelligent And Sustainable Cement Production Chatterjee A.K. 9781032728445 , Total Quality Management 5Ed Besterfield 9789353066314 , Matrix Methods Of Structural Analysis Kothandaraman 9789357059190 , Hydraulics And Fluid Mechanics Hydraulic Machine Modi , Seth Bks291963 , Limit State Design Of Steel Structures Duggal 9789353164874 , Schaums Outline Of Reinforced Concrete Everard 9789389538656 , Earthquake Resistant Design Of Structures Agarwal Bks344533 , Building Materials Varghese 9788120350915 , Total Quality Management 2Ed Mukerjee 9788119364299 , Principles Of Geotechnical Engineering 10 Th Ed Das 9789355738103 , Building Materials Products Properties And Systems Gambhir 9780071077606 , Gate 2025 Civil Engineering - Guide By Gkp C L Educate 9789356817593 , Gate 2025 Mechanical Engineering Guide Gkp 9789356817746 , Engineering Design Dieter 9789355322258 , Economics And Principles Of Management Vinoth Kumar 9788194244646 , Vector Mechanics For Engineers Dynamics Beer 9789353166656 , Aviation Maintenance Management Kinnison 9780071076838 , Theory Of Machines S S Rattan 9789353166281 , Turbomachinery Dubey 9789353161156 , Engineering Mechanics 4/E Kumar 9780070681811 , Modern Compressible Flow: With Historica Anderson 9789355320070 , Programming In Matlab Patel Mittal 9789332524811 , Finite Element Analysis Moaveni 9788131760642 , Non Conventional Energy Resources Sobh Nath Singh 9789332543577 , Additive Manufacturing And 3D Printing Technology Awari Thorat 9781041049562 , Practical Guide To Vehicle Refinishin Woodstock 9781032963570 , The Internet Of Mechanical Things The Iot Framework Sami Salama Hussen 9781041038573 , Energy Storage Systems And Components Alfred Rufer 9781041049470 , Metal Cutting Theory & Practice Stephenson 9780824758882 , Classical Mechanics Problems And Solutions Carolina C Llie 9781032983608 , Product Design Baxter 9781032967882 , Thermal Measurements & Inverse Tech Orlande 9781439845554 , The Induction Machines Design Handbook Boldea Bks331229 , Modeling And Control Of Engineering Systems Clarence W. De Silva 9781420076868 , Fundametals Of Production Planning And Control Chapman 9788131717394 , Applied Thermodynamics For Engineering Technologist 5Ed Eastop 9788177582383 , Classical Mechaincs Goldstein 9788131758915 , Introduction To Robotics Saha 9789355326461 , Thermodynamics-Basc And Applied Ganesan 9789353161279 , Ethics In Engineering 5/Ed Martin 9789355325075 , Digital Marketing Chaarlas 9788119243983 , Non Conventional Energy Resources Khan 9789352601882 , Supply Chain Logistics Management Bowersox 9789353162580 , Mechanical Metallurgy Appuraj Thiyagrajan Deiter 9781307834840 , Schaums Outline Of Continuum Mechanics Mase 9789389691283 , Schaums Outline Of Statics And Mechanics Of Materials Nash 9789389691399 , Maleev & Hartmans Machine Design 6Ed Grover 9788123926322 , Mass Transfer Theory And Applications Narayanan Bks440952 , Manual Of Fire Safety Prakash 9788123919904 , Gpropulsion Systems For Space Applications Satyanarayana 9789395038553 , Mechanics Of Materials Si Version 5Ed Philpot 9789354643293 , Introduction To Robotics 3/Ed Niku 9789357461306 , Advanced Mechanics Of Materials 6Ed Boresi 9788194726395 , Design And Analysis Of Experiments Douglas & Montgomery 9788126540501 , Machine Component Design Robert C.Juvinall 9788126559732 , Callisters Materials Science And Engineering, 2Nd Ed Balasubramaniam 9788126541607 , Process Dynamics And Control 4Ed Dale Seborg 9789354248429 , Engineering Optimization Theory And Practice 5Ed Rao 9789357461238 , Principles Of Modern Manufacturing Si Version Groover 9788126573059 , Convective Heat And Mass Transfer South Asian Edi Mostafa Ghiassiaan 9781107511811 , Continuum Mechanics Jog C S 9781108437141 , Singers Engineering Mechanics Statics & Dynamics ( Si Units ) 3Ed Vijay Kumar 9788178002194 , Analytical Mechanics Fowles 9788131501115 , Thermal Sciences Potter Scott 9788131529461 , Physical Metallurgy Principles Abbaschian 9788131520697 , Additive Manufacturing Technology Hari Prasad 9789353500481 , Computational Fluid Dynamics & Heat Ghosh Dastidar 9788131533079 , Internet Mrketing With Mt Zahay 9789355734570 , Mechanical Vibrations Theory And Applications Kelly 9788131526033 , Mechanics Of Materials, Enhanced Edi Goodno--Gere 9789355737847 , Fundamentals Of Mechatronics Jouane 9788131526026 , Mechanics Of Materials Strength Of Materials Pilli/Bala 9789386668509 , Workshop Manufacturing Practices Ai Juneja 9789387994614 , The Finite Elements Methods - Its Basis & Fundamentals 7/Ed Zienkiewiez 9789351071587 , Automation And Collaborative Robotics (Dp) Mathews 9781484277102 , The Robotic Process Automation Handbook : A Guide To Implementing Ri Systems Taulli 9781484275306 , Materials Selection In Mechanical Design 5Ed Ashby 9789351073864 , Industry 4.0 : The Industrial Internet Things Gilchrist 9781484249703 , The Finite Element Method A Practical Course 2Ed Liu 9789351071594 , Elasticity-Theory, Applications & Numerics 2Ed Sadd 9789351072270 , Energy Resources And Their Utilisation R.K. Khitoliya 9789394917040 , Workshop Theory And Practice Delilah Sam 9788119365098 , New Persp. In Hybrid Vehicle Technology Samual Rodrigues 9788119365418 , Natural Gas Engineering Selvin 9788119365197 , Machine Shop Theory Samual Rodrigues 9788119205639 , Applied Mechanics Laboratory Samual Lobo 9788119365760 , Robotics: Emerging Opportunities Adrian Dsilva 9788119523702 , Advances In Hypersonic Vehicles Samual Rodrigues 9788119365500 , Machine Elements Samual Rodrigues 9788119205691 , Work And Energy Parth Chavda 9788119365234 , Design Thinking : A Comprehensive Textbook Tiwari 9789357468640 , Welding Technology Sanfras Monteiro 9788119523023 , Combustion Engineering Samual Rodrigues 9788119205943 , Fluid Machinery Noel Vincent 9788119365029 , Renewable Energy Roy 9789384007157 , Engineering Graphics Using Autocad 7/Ed {Pb} Elanchezhian C 789387938564 , Introduction To Micromachining 2Ed Jain 9788184873610 , A Systems Approach To Automotive Technology Erjavac 9788131512111 , Emotionally Intelligent Design Pavliscak 9789352138029 , Mechanics Of Solids Binu Sivakumar 9789380381671 , Mechanics Of Solids Christian Johnson 9789385983085 , Jet Engines Jaganathan 9789380381497 , Essentials Of Management, 11Ed Koontz 9789353168148 , Disaster Management Subramanian Bks481407 , Engineering Fluid Mechanics Kumar Bks613447 , A Textbook Of Fluid Mechanics Rajput Bks648302 , A Textbook Of Thermal Engineering ( Lpspe ) Khurmi Bks613483 , Materials Science And Engineering Raghavan 9788120350922 , Engineering Economics 2Nd Ed Panneerselvam Bks661039 , A Tb Of Theory Of Machine Gupta R Khurmi Bks408347 , Energy Security And Sustainability Shukla A. 9781032728926 , Mechanical Engineering Jain Bks554131 , Engineering Materials And Metallurgy Annamalai 9789386235046 , Kinematics Of Machinery Baskar Bks462932 , Thermal Engineering Swaminathan Bks638475 , Engineering Materials And Metallurgy Baskar Bks638439 , Lean Manufacuring Kalyana Chakravarthy Bks638464 , Elements Of Mechanical Engineering Singh Bks448529 , Fundamentals Of Manifacturing Engineering Singh 9789380156002 , Strength Of Machine Elements Ghorpade 9789384726003 , Observability Engineering Achieving Production Excellence Majors 9789355422996 , Research Methodology 5Ed Kothari 9789389802559 , The Automotive Body Vol 2 Morello 9788132208884 , Kinematics Of Machines Kumar 9789388005425 , Essentials Of Heat And Fluid Flow In Porous Media Narasimhan 9789382127215 , Analysis Of Composite Structures Decolon 9789380931463 , Theory Of Elasticity Chandramouli 9789380381633 , Principles Of Composite Material Mechanics 3Ed Gibson Bks380369 , Introduction To Combustion Engineering Basic And Applied Amitava Sarkar 9789357053129 , Textbook Of Finite Element Analysis Seshu Bks414440 , Engineering Thermodynamics Savithiri Bks442773 , Automobile Engineering Vol-Ii Kirpal Singh 9788180142512 , An Introduction To Mechanical Engine 4Ed Wickert Lewis 9789353507473 , Welding Engineering & Technology Parmar Bks53191 , Manufacturing Technology Vol 1-Foundry Forming Rao 9789353160500 , Manufacturing Technology Singh 9789381162385 , Dynamics Of Machines Balaguru 9789386668608 , Unconventional Machining Vivekanandhan Bks613041 , Basic Civil And Mechanical Engineering Shanmugam 9789355329547 , Engineerin Drawing 2Ed Shah / Rana 9788131710562 , Materials For Engineers And Technicians 7Ed Bolton 9781032973722 , Fuel Cell Technology Handbook Hoogers Bks333321 , Robots And Robotics Miller 9789387572966 , Non Destructive Testing And Materials Vivekanandhan Bks476859 , Engineering Mechanics Nelson 9780070146143 , Engineering Tribology 4Ed Stachowiak 9789351071679 , Materials Selection In Mechanical Design 5Ed Ashby 9789351073864 , Automobile Engineering Ayyappan Karthikeyan Bks464418 , Thermal Engineering Swaminathan Bks638475 , Automobile Engineering Babu Singh Bks587323 , A Textbook Of Production Technology Sharma Bks479783 , A Textbook Of Mechatronics Rajput Bks554009 , Automobile Engineering Jain 9780070445291 , Engineering Mechanics Statics & Dynamics Khanchani 9788180521089 , Basic Mechanical Engineering Prabhu 9788183715737 , Powder Metallurgy Ramakrisnan 9789381714485 , Additive Manufacturing Technology Hari Prasad 9789353500481 , Switching And Finite Automata Theory Jha 9780521176804 , Introduction To Mechanics 2Nd Ed Mahendra K Verma 9788173719813 , Basic And Applied Thermodynamics - A Ready Recknor Bhat 9789388005074 , Basic Refrigeration And Airconditioning 4Ed Ananthanarayanan 9781259062704 , Engineering Mechanics Applied Mecha Gupta 9789353505240 , Mechatronics Sathish Kumar Bks476759 , Automobile Engineereing Vol I Singh Bks247106 , Process Planning And Cost Estimating Selvakumar Bks480422 , Non Conventional Energy Resources Sawhney 9788120346093 , Non Conventional Energy Resources Sobh Nath Singh 9789332543577 , Introduction To Micromachining 2Ed Jain 9788184873610 , Vector Mechanics For Engineers Statics/Dynamics (Sie) Beer 9789353166625 , Fluid Mechanics &Hydraulics Rev &Updated Edn Ukarande 9789381162538 , Mechanical Measurements - Revision 6Ed Beckwith 9789353945633 , Vibration Monitoring Testing And Instrumentation C W.De Silva 9781032292137 , A Treatise On Turbomachines Gopalakrishnan Bks321517 , Construction Materials Vs Karthikeyan Bks476834 , Design Of Machine Elements Bhandari 9789390177479 , Mechanical Vibrations Bhava 9788131732489 , Design Of Transmission Systems Baskar Bks476758 , Engineering Materials And Metallurgy Baskar Bks638439 , Manufacturing Technology Vivekanandhan Bks638476 , Design Of Machine Elements Arunraja Bks638441 , Mechanical Vibrations Nag 9788126530908 , Power Plant Engineering Dhanasekar Bks505300 , Statistical Quality Control A Modern Introduction 6Ed Montgomery 9788126525065 , Additive Manufacturing Technologies Shiva Ahuj Shukla 9789357462419 , Hydraulics And Pneumatics Dixon Bks638479 , Engineering Principles Of Ground Modification Hausman 9789351341871 , Engineering Thermodynamics 6Ed Nag 9789352606429 , Refrigeration And Air Conditioning Arora 9789390385843 , Enterprise Resource Planning 4Th Edn Leon 9789353167820 , Foundations Of Material Science And Engg 6Th Edn Smith 9789355322173 , Shigleys Mechanical Engineering Design Budynas 9789390219636 , General Studies Paper - I ( 2025 ) Mhe 9789355327796 , Erp Demystified 3/Ed Leon 9789383286676 , Heat And Mass Transfer 6Ed Cengel 9789390185283 , Engineering Noise Control: Theory And Practices 4Ed Bies 9780415487078 , Rapid Prototyping And Engineering Applications Frank W.Liou 9781138569577 , Strength Of Materials Vol Ii Binu Sukumar 9789388005418 , Mechatronics A Foundation Course Clarence W.De Silva 9781138569553 , Design And Analysis Of Randomized Algorithms Hromkovic 9788132231592 , Metrology And Measurements Annamalai 9789388005463 , Fluid Mechanics And Machinery Molykutty 9789391549725 , Micro Electro Mechanical System Design Allen 9780824758240 , Micromachining Of Engineering Materials J Mcgeough 9781032419794 , Gas Turbine Combustion-3 Rd Ed Lefebvre 9781138569584 , Ergonomics Laboratory Exercises Joseph Gallwey 9781032973005 , Introduction To Biofuels Mousdale 9781439812075 , Environmental Engineering Charles Monteiro 9788119205509 , Power Plant Engineering Lijo Thomas 9788119365036 , Industrial Engineering Richard Carvalho 9788119205523 , Design & Operation Of Heat Exchanger Gerhard Rott 9788119365425 , Hydro Power Gerhard Rott 9788119205912 , Air Conditioning And Ventilation Systems Lijo Thomas 9788119365401 , Materials Science And Engineering Raghavan 9788120350922 , Automation And Collaborative Robotics (Dp) Mathews 9781484277102 , Design Management : Create, Develop And Lead Effective Design Teams Picchi 9781484283615 , Heat And Mass Transfer 2Ed Karwa 9789811926099 , Testing Of Metallic Materials 2Ed Suryanarayana 9788178001340 , Introduction To Engineering Materials 2/Ed Murray George 9781032530772 , Mechanics Of Composite Materials 2/Ed Jones R.M 9781138571075 , Reliability Evaluation Of Enginnering Systems 2Ed Billinton 9788181285522 , Workshop Practice Manual 6/Ed Reddy 9788178003078 , Finite Element Analysis 2D Lakshmi Narasai 9789389354225 , Engineering Mechanics Pb Lakshmi 9789390211609 , Engineering Mechanics 2Ed Harbola 9788131518298 , Environmental Science And Engineering Rajesh Gopinath 9789387511569 , Materials Science And Engineering Periodical Renewal Gilmore 9788131520451 , Environmental Science With Mt 16 Th Ed Miller 9789355738899 , Fluid Mechanics Munson Huebsch 9788126553433 , Engineering Mechanics: Dynamics, Si Version Meriam Bolton 9788126565375 , Engineering Mechanics Statics And Dynamcs James Meriam Kraige 9789354248566 , Engineering Fluid Mechanics Elger 9788126564491 , Engineering Mechanics Applied Mecha Gupta 9789353505240 , Machine Design Data Book Ramana 9789387593879 , Heat Transfer Alan 9789332575066 , Theory Of Machines 3Ed Bevan 9788131729656 , Introduction To Enviromental Engineering And Science Masters 9789332549760 , Heat And Mass Transfer Mayilsamy 9788131733837 , Engineering Thermodynamics 4Ed Rogers 9788131702062 , Operations Research :An Introduction-10Th Ed Hamdy Taha 9789352865277 , Engineering Mechanics - Statics & Dynamics Shames Rao 9788177581232 , Automation, Production Systems, And Computer - Integrated Manufacturing 5Th Ed Groover 9789361592959 , Introduction To Materials Science For Engineers 9E/D Shackelford 9789357059978 , Fundamentals Of Engineering Drawing Luzadder 9789332549982 , Engineering Materials Properties And Selection 9Ed Budinski Naraimhulu 9789332574045 , Thermodynamics Rajadurai Bks471287 , Environmental Science And Engineering Kaushik 9788122436471 , Engineering Optimization 4Ed Rao 9789395161800 , Cad/Cam/Cim 5Ed Radhakrishnan 9789395161855 , Finite Element Analysis With Ansys Workbench Tickoo 9789355513007 , Industrial Waste Management Mathankumar Bks480053 , Metrology And Measurements Vivekanandan Bks638442 , Finite Elements Analysis Baskar Bks534307 , Environmental And Agriculture Kavitha Bks638465 , Energy Materials Bandarenka A.S 9781032530789 , Digital Twin Ranjan Ganguli 9781032934198 , Industry 5.0 The Future Of The Industrial Economy Uthayan 9781032600130 , Quantum Computation Helmut Bez 9781032983738 , Wind Electrical Systems Bhadra, 9780195670936 , Metal Fatigue In Engineering Stephens 9788126539215 , Introduction To Industrial Internet Of Things And Industry 40 Sudip Misra 9781032146751 , Sustainable Manufacturing For Industry 4.0 Jayakrishna K. 9781032728728 , Reverse Supply Chains: Issues And Analysis Gupta S.M. 9781032729039 , Industry 5.0 The Future Of The Industrial Economy Uthayan 9781032600130 , Gas Turbine Heat Transfer Cooling Je-Chin Han, Sandip Dutta 9781439855683 , First Course In Aerial Robots And Drones (A) Bestaoui Sebbane 9781032963518 , Handbook Of Induction Heating Rudnev 9780824708481 , Fracture Mechanics (Forth Ed) T.L Anderson 9781032292120 , Fire Safety Engg Design Of Structures, 2Ed Purkiss 9788131220085 , Future Energy Improved Sustainable And Clean Opitons Letcjer 9788131220849 , Introduction To Finite Elements In Engineering 5/E Tirupathi 9781009461818 , Fundamentals Of Gas Dynamics Babu 9781910390009 , Fundamentals Of Propulsion Babu 9788180522529 , Engineering Metrology 3Rd Ed Narayana Bks396066 , Engineering Mechanics Kumaravelan Bks315205 , General Aptitude For Competitive Examinations Pattanaik Bks670722 , Dictionary Of Heat Power Engineering Ramalingam 9789386923035 , Environmental Pollution Principles Narayana Bks353570 , Production Processes Luqman 9788123918983 , Tractors And Their Power Units, Hb Lijiedahal 9788123905013 , Metal Cutting Principles Shaw 9788123901367 , Sheet Metal Press Tools Design And Making A Practical Approach Luqman 9788123925134 , Solid State Physics Wahab 9788184877786 , Practical Non - Destructive Testing, 3Ed Baldev Raj 9788173197970 , Mechanics Of Machines, 3Ed Ramamurti 9788173198922 , Handbook On Quality And Productivity Improvement Of Concrete Nayak 9788184876390 , Environmental Studies 4Ed Rajagopalan 9789354978944 , Finite Element Methods Dhanraj 9780198073901 , Fluid Dynamics Raisinghania Bks320511 , Entrepreneurship 11/Ed Hisrich 9789390113309 , Thermodynamics 9Th Ed Cengel 9789353165741 , Cad / Cam : Computer - Aided Design & Manufacturing Groover 9788177584165 , Engineering Vibration, 4/E Inman 9789332518483 , Thermodynamics 9Th Ed Cengel 9789353165741 , Schaums Outline Of Mechanical Vibration Graham Kelly 9789389538861 , Enterprise Resource Planning Singla 9789360531485 , Machine Drawing 51Ed Bhatt 9789385039560 , Heat Treatment : Principles And Techniques 3Ed Rajan 9788119364077 , Total Quality Management 2Ed Mukerjee 9788119364299 , Heat Treatment : Principles And Techniques 3Ed Rajan 9788119364077 , Operations Research Panneerselvam 9789354437892 , Design Thinking Teun Den Dekker 9781032786018 , Aeroplane Ramalingam 9788193103159 , Faqs In Control Systems Engineering Pattanaik 9789394639003 , Mass Transfer - Theory & Practice Begum/Anantharaman 9788120341692 , Total Quality Management 5Ed Besterfield 9789353066314 , Production &Operations Management 3Ed Panneerselvam Bks477079 , Manufacturing Technology Vol 2-Metal Cutting Rao 9789353160524 , Engineering Drawing Agrawal 9789353167448 , Cad / Cam : Computer - Aided Design & Manufacturing Groover 9788177584165 , Engineering Mechanics : Statics & Dynamics Kottiswaran Bks307984 , Power Plant Engineering Hegde 9789332534100 , Hydraulics And Fluid Mechanics Hydraulic Machine Modi , Seth Bks291963 , Fundamentals Of Heat And Mass Transer Kothandaraman Bks481435 , Alternative Fuels For Ic Engines Krishnasamy 9789364441995 , Mechatronics Electronic Control Systems In Mechanical And Electrical Eng Bolton 9789357052849 , Manufacturing Technology Vol 2-Metal Cutting Rao 9789353160524 , Fundamentals Of Heat And Mass Transer Kothandaraman Bks481435 , Mechatronics Electronic Control Systems In Mechanical And Electrical Eng Bolton 9789357052849 , Production &Operations Management 3Ed Panneerselvam Bks477079 , Engineering Drawing Agrawal 9789353167448 , Mass Transfer - Theory & Practice Begum/Anantharaman 9788120341692 , Industrial Robotics Control Frigeni 9781484294154 , Gate 2025 Production And Industrial Eng Gkp 9789356818170 , Engineering Vibration, 4/E Inman 9789332518483 , Fundamentals Of Engg Heat And Mass Transfer-5Ed Sachdeva 9789386070968 , Internet Of Nanothings And Wireless Body Area Networks Fadi 9781032599144 , Modern Machining Processes Pandey 9789386761835 , Materials Science For Mechanical Engineering Palanisamy 9789386923059 , Materials Science For Mechanical Engineering Palanisamy 9789386923059 , Textbook Of Fluid Dynamics Chorlton 9788123908816 , Engineering Mechanics : Statics & Dynamics Kottiswaran Bks307984 , Robotics Rajmohan Bks480419 , Hmt Data Book Kothandaraman 9788812243594 , Design Data (Data Book) Psg Bks58578 , Digital Signal Processing 2Ed Paulo Diniz 9781108406703 , 8086 Microprocessor And Applications 3Ed Kani 9789354661327 , Wireless Telecommunication System & Network Mullett 9788131520123 , Operational Amplifiers & Linear Integrated Circuits Lal Kishore 9788177585667 , Mobile Computing Principles Bfar 9780521696234 , Microprocessors & Programmed Logic 2Ed Short 9788131709160 , Design With Pic Microcontroller Peatman 9788177585513 , Digital Systems Design With Access Code Nagoor Kani 9789354667688 , Introduction To Biomems Folch 9781032568225 , Introduction To Biomedical Equipment Technology 4Ed Carr 9788177588835 , Antennas & Wave Propagation Raju 9788131701843 , Raspberry Pi For Dummies Cook 9789357460422 , Digital Signal Processors : Architectures --Op Kuo 9788131717936 , Principles Of Electromagnetics, 6Ed Sadiku 9780199461851 , Advanced Digital Design With The Verilog Michael.D.Ciletti 9789332584464 , Neural Networks Kumar 9781259006166 , Embedded System 2Nd Ed Peckol 9789357463966 , Microprocessor And Peripherals Chowdhury Bks405737 , Networks & Systems Roy Choudhury 9789389802535 , Microcontroller Theory And Application With The Pic Rafiquzzaman 9788126548354 , Digital Signal Processing For Anna University Kani 9789354661006 , Digital Signal Processing 3Ed Kani 9789354661167 , Analog And Pulse Circuits Lakshmaiah D 9789389354201 , Electronic Devices And Circuits Orient 9789386235305 , Quantum Chemistry 7 Ed Levine 9789332558533 , Engineering Circuit Analysis 9/Ed Hayt 9789390185139 , Gate 2025 Electronics And Communication Eng.Guide Gkp 9789356819306 , Chip Design For Submicron Vlsi : Cmos Layout And Simulation Uyemura 9788131501955 , Microelectronics Neamen 9789354601637 , Neural Networks And Learning Machines Haykin 9789332570313 , Electronic Circuits : Fundamentals And Applications 5Ed Tooley 9781032726687 , A Course In Digital Signal Processing Pucca Bundh Porat 9788126534913 , Signals And System Apte 9781316615393 , Digital Design 6Ed Mano 9789353062019 , Principles Of Signal Processing And Liner System Lathi 9780198062288 , Fiber Optic Communications 5Ed Palais 9788131717912 , Circuits And Networks Sudhakar 9789339219604 , Introduction To Communication Systems Madhow 9781316608241 , Analog Communication Rao 9780070704800 , Arduino Based Embedded Systems Singh 9781032964058 , Next Generation Wireless Lans 2Nd Ed Perahia 9781107414617 , Arm Microprocessor System Tahir 9781138387539 , Digital Communication Mutagi Bks478677 , Advanced Microprocessors & Peripherals Bhurchandi 9781259006135 , Vlsi Design Chitra 9788183716598 , Television And Video Engineering Salai Thillai 9788183712194 , The Design Of Cmos Radio Frequency Integrated Circuits Lee 9780521613897 , Network Security : Private Communication In A Public World Charlie Kaufman 9788196874339 , Sensors And Transducers Patranabis 9788120321984 , Neuro Fuzzy And Soft Computing Jang Sun Mizutani 9789332549883 , Network Analysis Channa Venkatesh 9788131533215 , Circuits Carlson 9788131505861 , Op Amps And Linear Integrated Circuits : Concepts And Applications Fiore 9788131512340 , Mobile Computing Principles Bfar 9780521696234 , Instrumental Methods Of Analysis Willard 9788123909431 , Vlsi Circuits And Embedded Systems Hasan Babu 9781032906003 , Computer Organization And Embedded System-6 Th Ed Hamacher 9789339218317 , Network Analysis And Synthesis, 2Ed Singh 9789353166724 , Handbook Of Biomedical Instrumentations Khandpur 9789355328021 , Security And Privacy In Internet Of Things Lots Hu Fei 9781032707150 , Television & Video Engineering Veeralakshmi 9789380156699 , Power Quality Sankaran 9781138569249 , Introduction To Microcontroller Programming For Power Electronic Control Applications Rossi 9781032972183 , Communications System Laboratory Preetham Kumar 9781138603288 , Digital Signal Processing And Its Applications Senthil Kumar 9788195268726 , Multimedia Enabled Sensors In Iot Fadi 9781032599205 , Novel Wearable Antennas For Communication And Medical System Albert Sabban 9781041049579 , Internet Of Things Using Single Board Computers : Principles Of Iot And Python Programming Kanagachidam Baresan 9781484299258 , Handbook Of Optical Communication Networks Ilyas 9781498798037 , Communications System Laboratory Preetham Kumar 9781138603288 , Digital Watermarking And Steganography 2Nd Edition Shih 9781032972121 , Propagation Handbook For Wireless Communication System Design Crane 9780849308208 , The Internet Of Things In The Cloud Honbo Zhou 9781498770354 , Arduino Based Embedded Systems Singh 9781032964058 , 5G Mobile Communications Concepts And Technologies Saad Asif 9781032663159 , Electronic Devices 10Ed Robert Floyd 9789354493935 , Semiconductor Physics And Devices, 3Ed Sze 9789354243226 , Digital Fundamentals 11Ed Floyd 9789332584600 , Electronic Devices And Circuits--11 Ed Boylestad Nashelsky 9789332542600 , The 8051 Microcontrollers & Embedded Systems 2Ed Mazidi 9788131710265 , A System C Primer 2Ed Bhasker 9788178001418 , Household Electricity And Appliances P.B Bhagava 9789390211265 , Image Processing Analysis And Mach Sonka 9789386858146 , Verilog Hdl 2Ed +Cd Palnitkar 9788177589184 , Modern Semiconductor Devices For Integration Hu 9788131730249 , Analog Integrated Circuit Design Isv 2Nd Ed Chan Carusone 9788126543939 , Textbook Of Digital Electronics Vasudevan 9789381714539 , Microwave Engineering 4Ed Das 9789390113347 , Analysis Of Microcontrollers For The Students Kothari 9789381714294 , Digital Signal Processing : For C.S.I.T Palani 9789380618388 , Fundamentals Of Digital Images Processing Jain 9789332551916 , Signals And Systems Sreenivasa Reddy 9789389354041 , Satellite Communications Pratt 9789354243035 , Analog Signals And Systems Kudeki 9788131787984 , Embedded Systems Handbook 2Ed System Design And Verification Zurawski Bks331222 , Vlsi Design And Eda Tools 2Nd Ed Sarkar 9788183714976 , Vlsi Design Das 9780198094869 , 8085 Microprocessor Pramod Borole 9789382127581 , Fundamentals Of Communication Systems Proakis 9788131705735 , Short Range Wireless Communication 3Ed Bensky 9789351073994 , Introduction To Fiber Optics Ghatak Ajoy 9781316644010 , The Definitive Guide To Arm Cortex M3 And Cortex M4 Processors Yiu 9789351071754 , Rf Circuit Design Ludwig 9788131762189 , Electric Circuits For Be/Betch 2Ed Kani 9789354663925 , Control Systems Nagoor Kani 9789389239010 , Digital Logic Circuits Nagoor Kani 9789354669989 , Microwave And Rf Design Steer 9789380381305 , Electrical Measurement And Measuring Instruments Rajput Bks543993 , Digital Signal Processing 3Ed Kani 9789354661167 , A Handson Course In Sensors Using The Arduino And Raspberry Pi Ziemann Volker 9781032791470 , Signal And Systems Simplified 2Ed Nagoor Kani 9789354661013 , Basic Electrical And Electronics Engineering 2/Ed Bhattacharya 9789332586505 , Ad Hoc Wireless Networks : Architectures & Protocols Murthy 9788131706886 , Ad Hoc And Wilreless Sensor Network Athawale 9789356066137 , Digital Circuits Design Kothari 9789332543539 , Solid State Electronic Devices Streetman 9789332555082 , Wireless Communication Goldsmith 9780521704168 , Probability And Stochastic Processes 3Ed Yates 9789354243455 , Signals, Systems And Inference Oppenheim 9789356064676 , Electromagnetic Field And Waves Salivahanan 9788119896677 , Analog Design For Cmos Vlsi Systems Maloberti 9788181284341 , Vlsi Design Michael 9780849318764 , Cognitive Sensors And Iot Fadi 9781032599236 , Digital Design & Computer Organization Farhat 9780849311918 , Digital Intergrated Circuits Evegni 9780849330575 , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi Ambaji Kulkarni 9781032966885 , Basic Electrical And Electronics Engineering Murugan 9789384726072 , Adaptive Antenna Arrays Chandran 9788181289322 , Networks Lines & Fields 2Ed Ryder 9789332559516 , Data Compression : The Complete Reference Salomon 9788184898002 , Electric Circuits Bell Bks321194 , Digital Signal Processing Oppenheim 9789332550339 , Iot Standards With Blockchain : Enterprise Methodology For Internet Of Things Upadrista 9781484284278 , An In Depth Guide To Mobile Device Forensics Chuck Easttom 9781032785905 , Digital Signal Processing Oppenheim 9789332550339 , Digital Modulation & Coding Wilson 9788131721438 , Fundamentals Of Mobile Computing 2Ed Pattnaik Bks534717 , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi Ambaji Kulkarni 9781032966885 , Biomedical Instrumentations And Measurements Cromwell 9789332556911 , Artificial Neural Networks For Engineers And Scientists Chakraverty S. 9781032729121 , Digital Communication Bhattacharya 9780070591172 , Signals And Systems 2/Ed Oppenheim 9789332550230 , Fundamentals Of Modern Vlsi Devices Yuan Taur 9781316649794 , Digital Systems:Principles&Design(Anna) Rajkamal 9789332535916 , Principles Of Cognitive Radio Vincent 9781107439900 , Digital Signal Processing 4Ed Proakis 9788131710005 , Op Amps And Linear Integrated Circuits Gayakwad 9789353949037 , Microwave And Radar Engineering Rao 9788131799444 , Introduction To Pspice Using Orcad For Circuits And Electronics Rashid 9789332555174 , Basic Electronics Saha 9781316632932 , Linear Integrated Circuits Salivahanan 9789353163808 , Principles Of Electronic Communication Orient 9789386235107 , Optoelectronic Devices And Optical Fiber Communication Chakrabarti 9789354667947 , Introduction To Vlsi Design Flow Sneh Saurabh 9781009200813 , Antennas And Wave Propagation Kraus 9789352606184 , Network Analysis Revised 3Ed Van Valkenburg/ Rathode 9789353433123 , Communication Systems : Analog And Digital, 3Rd Singh 9781259004605 , Internet Of Things The : How Smart Tvs Sm Miller 9789332552456 , Microwave Devices & Circuits 3Ed Liao 9788177583533 , Fundamentals Of Mobile Computing 2Ed Pattnaik Bks534717 , 5G Mobile And Wireless Communication Technology Pauline Cullen 9781009590921 , The Intel Microprocessors : 8086/8088,80186/80188,80286,80386,80486,Pentium, Pentium Pro Processor, Pentium Ii - 8Ed Brey 9788131726228 , Circuits Analysis Theory And Practic Robbins 9788131519028 , Medical Instrumentation 5Ed : Application And Design : An Indian Adaptation Webster 9789354249150 , Microwave Engineering, An Indian Adaptation Theory And Techniques Pozar 9789388991087 , Wireless Communications 2Ed Molisch 9789354248795 , Controll System Eng. 8/Ed Norman 9789357463980 , Signals, Systems, And Transforms, 4/E Phillips 9789332518490 , Antenna Theory And Applications 4Ed Balanis 9789354248474 , Gate 2025 Electronics And Communication Eng.Guide Gkp 9789356819306 , Introduction To Analog And Digital Communication 2Ed Haykin 9789354644337 , Digital Image Processing Gonzalez 9789353062989 , Power Electronics (An Indian Adaption) Ned Mohan 9789354640278 , Dorfs Introduction To Electric Circuits Wiley India Edition Richard 9788126573493 , Electronic Devices 10Ed Robert Floyd 9789354493935 , Communication Systems 5Ed Haykin 9789354640896 , Modern Control Engineering Ogata 9789332550162 , Electric Circuits With Mt Kang 9789386650344 , The Intel Microprocessors : 8086/8088,80186/80188,80286,80386,80486,Pentium, Pentium Pro Processor, Pentium Ii - 8Ed Brey 9788131726228 , Modern Digital Electronics-5Th Edtion Jain 9789355321770 , Analog And Digital Electronics Roth 9789353502355 , Introduction To Communication Systems Madhow 9781316608241 , Voip Handbook Application Technologies Ahson 9781420070200 , Embedded Systems Handbook 2Ed Network Embedded System Zurawski Bks331227 , Matlab: An Introduction With Applications 6Ed Amos Gilat 9789357462174 , Fiber Optic Communication Systems 5Ed Agrawal 9789357461245 , Crc Handbook Of Modern Telecommunications 2Ed Morreale Bks331221 , Mathematical Aspects Of Signal Processing Sircar 9781107175174 , Rf And Microwave Semiconductior Device Handbook Golio 9780849315626 , Electronic Systems Maintenance Handbook, Second Edi Whitaker Bks322864 , The 8051 Microcontroller Ayala 9788131502006 , Digital Systems Design Using Vhdl W/ Roth 9788131518304 , Fundamentals Of Engineering Electromagnetics Cheng 9789332535138 , Basic Electronics-2Ed Kothari 9789352606467 , Power Electronics Essentials & Applications Umanand 9788126519453 , An In Depth Guide To Mobile Device Forensics Chuck Easttom 9781032785905 , Automotive Embedded Systems Handbook Navet Bks335190 , Wavelet Analysis With Applications To Image Process Prasad 9780849331695 , Primer On Wavelets And Their Scintific Applications Walker 9781032963617 , Face Detectin And Recognition: Theory And Practice Datta A.K. 9781032728964 , Fiber Optics & Optoelectronics Khare 9780195669305 , Mobile Cellular Telecomm 2E Lee 9780070635999 , Cmos Vlsi Design : A Circuits And Systems Perspective, 3Ed Weste 9788131762653 , Antennas Blake 9789380381268 , Mobile Communications, 2Ed Schiller 9788131724262 , Introduction To Wireless Systems Black 9788131726389 , Ad Hoc And Wilreless Sensor Network Athawale 9789356066137 , Linear Integrated Circuits Sathishkumar Bks476847 , Linear Integrated Circuits Dhanasekar Bks638493 , Embedded And Real Time Systems Ramprabu Bks476848 , Transmission Lines And Rf Systems Shanmugaraja Sivakumar Bks490771 , Transmission And Distribution Gayathri Bks476751 , Wireless Communication Santhosh Krishna Bks638491 , Digital System Design Edwindhas Bks638462 , Power Quality & Distributed Generation Jayaprakash 9788184876987 , Digital Signal Processing Antoniou 9780070636330 , Power System Engineering 3 Ed Kothari 9789353165116 , Digital Integrated Circuit 2/Ed Rabeay 9789332573925 , Principles Of Electronic Materials Kasap 9789390113866 , Digital Logic Circuits With Vhdl And Verilog Programs Nagoor Kani 9789354669606 , Principles Of Electronic Materials Kasap 9789390113866 , Wireless Communications : Principles Rappaport 9789356066212 , Communication Networks Fundamentals Leon 9780070595019 , Interoperability In Iot For Smart Systems Roy M. 9781032728100 , Basic Elec & Linear Circuits Bhargava 9781259006463 , Brain Computer Interface Eeg Signal Processing Panigrahi 9781032851181 , Learning Basics And Electronic Science Through Mcqs Priya 9789394639249 , Fundamentals Of Logic Design Roth 9789360535650 , Engineering Circuit Analysis 10E/D Hayt 9789364441094 , Programmable Logic Controllers 6Th Ed Petruzella 9789355325860 , Modern Wireless Communication Haykin 9788131704431 , Signals And Systems 5Ed Ramesh Babu Bks505218 , Digital Signal Processing Ramesh Babu Bks503977 , Digital Image Processing 2Ed Sridhar Bks643706 , Digital Logic Circuits With Vhdl And Verilog Programs Nagoor Kani 9789354669606 , Wireless Communications : Principles Rappaport 9789356066212 , Digital Integrated Circuit 2/Ed Rabeay 9789332573925 , Brain Computer Interface Eeg Signal Processing Panigrahi 9781032851181 , Internet Of Nanothings And Wireless Body Area Networks Fadi 9781032599144 , Phyiscs For Electronics & Information Science Palanisamy 9789386923134 , Vlsi Design Sathyah Bks665018 , Basic Elec & Linear Circuits Bhargava 9781259006463 , Communication Networks Fundamentals Leon 9780070595019 , Linear Integrated Circuits Salivahanan 9789353160487 , Wireless Communications : Principles Rappaport 9789356066212 , Linear Integrated Circuits Salivahanan 9789353160487 , Digital Logic & Computer Design Mano 9789332542525 , Digital Electronics Bignell 9788131520710 , Design Of Analog Cmos Integrated Circuit-2Ed Razavi 9789387067844 , Fundamentals Of Logic Design Roth 9789360535650 , Engineering Circuit Analysis 10E/D Hayt 9789364441094 , Digital Electronics Bignell 9788131520710 , Design Of Analog Cmos Integrated Circuit-2Ed Razavi 9789387067844 , Applied Machine Learning Gopal 9789354601590 , Essentials Of Digital Signal Process Using Matlab Ingle/Proakis 9788131517727 , Arm System On Chip Architecture Furber 9789332555570 , Smart Grid In Iot Enabled Spaces Fadi Ai Turjman 9781032598543 , Power Plant Engineering Nag 9789354600050 , Mathematical Analysis A Straightforward Binmore 9781107526235 , Algebra 2Nd Edition Michael Artin 9789353432751 , Discrete Mathematics Dhami 9780199452798 , Statistics And Numerical Methods 10Ed Vijayakumari 9789356062733 , Algebra, 3Ed Sahai 9788173198250 , Algebraic Topology M J Greenberg , J R Harper 9780367475604 , Algebra, 4Ed Sahai 9788184876208 , Concept Of Modern Algebra Pandey 9788184877069 , Friendly Introduction To Number Theory Silverman 9789353433079 , Elementary Differential Equations 8Ed Richard 9789332571617 , Introduction To Graph Theory West 9789332549654 , Linear Algebra Ubaidullah 9789391549893 , Higher Algebra Barnard 9789385923326 , Sequences And Series Arumugam 9789388005128 , Modern Analysis Arumugam 9789388005111 , Intorduction Topology And Modern Analysis Simmons 9789387465916 , Higher Algebra Hall Knight 9788174731043 , Analytical Geometry Veerarajan 9789388005142 , Transforms And Partial Diffrential Equations 3Rd Ed Muthucumaraswamy 9789391549473 , Multilevel Analysis: Techniques And Applications 3/E Hox 9781032938035 , Thomas Calculus 15Ed Hass 9788119896608 , Calculus Vil I 2Ed ( An Indian Adaptation) Apostol 9789354642630 , Calculus 10Ed Saturmino Salas Einar Hille Ga 9789390421961 , Introduction To Linear Regresion Analysis, 6Ed Montgomery 9789357461283 , Matrices Advanced Calculus & Complex Stewart 9789360534509 , Operations Research Mote 9788126556380 , Topology 2Ed James Munkres 9789353432775 , Linear Algebra 5Ed Friedberg 9789390168132 , Multivariate Calculus Joshi Bks498996 , Mathematical Analysis 6Ed Malik Bks413195 , Stochastic Processes 5Ed Medhi 9789389802245 , Human Resource Management Aswathappa 9789355323675 , The Elements Of Complex Analysis 3Ed Choudhary 9789388818780 , Probability And Statistics For Engineering Devore 9789353506247 , Operations Research Panneerselvam 9789354437892 , The Elements Of Complex Analysis 3Ed Choudhary 9789388818780 , Optics 8Ed Ghatak 9789355328595 , Outline Of Beginning Physics Schaum 9789389538984 , Outline Of Astronomy Schaum 9789389538939 , Introductory Nuclear Physics 3/Ed Krane 9789354640834 , Physics Vol 2 5Ed David Halliday Resnick 9789354640438 , Physics For Scientists And Engineers Serway 9789355739223 , Non Conventional Energy Source Math 9789388005081 , Nuclear Physics Theory And Experiments 3Ed Roy 9788122449884 , Gravitation : Foundations And Frontiers (South Asian Edition) Padmanabhan 9780521178761 , Electricity And Magnetism Murugeshan 9789352837342 , Introductory Nuclear Physics Wong 9788126546060 , Modern Physics Murugeshan Bks367126 , Introduction To Electrodynamics South Asia Ed - 4/Ed David J. Griffiths 9781108822909 , Theoretical Astrophysics Vol 2 Padmanabhan 9781107400603 , Heat Thermodynamics And Statistical Physics Lal Subramanian Bks460942 , Classical Dynamic Of Particles Thornton 9788131518472 , Materials For Engineers And Technicians 7Ed Bolton 9781032973722 , Statistical Mechanics 2Ed (An Indian Adaption) Kerson Huang 9789354247736 , Atomic And Molecular Spectroscopy Rita Kakkar 9781108413206 , Laser Fundamentals Silfvast 9780521138475 , Engineering Chemistry 2E : Fundamentals And Applications Shikha Agarwal 9781108724449 , Organic Name Reations Sanjay Bari 9789389354737 , Basics Of Environmental Science Khosla 9788184874013 , Environmental Chemistry Singhu 9788122427318 , Biomaterials Principles And Applications Joon Park 9781032934167 , Organic Reaction Mechanisms Ahluwalia Bks366263 , Organic Synthesis Concepts And Methods 3Ed Pb 2014 Jurgen Hinri 9788126547227 , Engineering Chemistry Palanna 9789352605774 , Engineering Chemistry 2Nd Ed Wiley 9788126543205 , A Textbook Of Engineering Chemistry Dara Bks561640 , Engineering Chemistry Vairam & Kalyani 9788126543342 , Chemical Applications Of Group Theory Albert Cotton 9788194726364 , Environmental Science And Engineering Yuganath 9788183717014 , Environmental Science Isv 8Th/Ed Botkin, Killer 9788126534142 , Chemical Reaction Engineering 3Ed (An Indian Adaptation) Octave Levenspiel 9789354244605 , Outline Of Thermodynamics Schaum 9789389538540 , Textbook Of Chemical Engineering Thermodynamics Narayanan 9788120347472 , Communication Skills, 3Ed Sanjay Kumar 9789354978555 , English For Science & Technology-I Chellammal 9781009224796 , English For Science & Technology-Ii Francis 9781009251181 , Effective Technical Communication Rizvi 9789352605781 , Research Methodology Vinod 9789352863518 , Placement Interviews Skills For Success Anandamurugan 9780070700956 , Prowess Orient 9789354421242 , Research Methodology Panneerselvam 9788120349469 , Academic Writing A Handbook For Students Stephen Bailey 9781138615533 , Design Thinking In Technical Communication Jason C K Tham 9781041004356 , Principles Of Scientific And Technical Mohapatra 9789355327482 , Critical Thinking Idea Innovation And Creativity Richard H Mccuen 9781041000846 , Literature For Language Skills 2Ed Mahanand 9789388005470 , Academic Writing P.B Ajay Semalty 9789390211739 , Teaching English Through Folktales Mahanand 9789391549077 , An Introduction To Literary Studies Mario Klarer 9781032785974 , Heritage Of Tamils Muthuramalingam 9789391549718 , A Short History Of English Literature Saintsbury 9788174733054 , The English Language Wrenn 9788174733368 , An Introduction To The Study Of English Litetrature Hudson 9788174731197 , Rabindranath Tagores Ideational Challenges Bidyut Chakrabarty 9789356400122 , English Literature Long Bks476291 , Test Of Reasoning 7Th Edn Thorpe 9789389811513 , Science And Technology 8Ed Agarahri Ravi 9789355326324 , Excel Reasoning Arun Sharma 9789355329455 , Aptipedia Aptitude Encyclopedia 2 Ed Wiley 9788126569502 , Excel Quantitative Apititude Arun Sharma 9789355327970 , Verbal Ability And Reasoning For Competitive Examinations Anand Lalit Singh 9788126554294 , Intermediate Engligh Grammer With Answers, 2Ed Murphy 9788185618517 , Design Thinking Teun Den Dekker 9781032786018 , Spotting Errors Lakshminarayanan Bks670723
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Tamil Nadu View Result →
Haryana View Result →
3.
Educational and Research Institute #11161433 Price Bid
Procurement Of Equipment, Instruments, Machinery, Tools Etc. Related To Laboratories And Workshops Of Electronics And Telecommunication Engg., Engineering Physics, Engineering Mechanics Of Mirik Government Polytechnic, Mirik, Dist. Darjeeling, 734214 , Spherometer (Screw Pitch 0.05 Mm And Lc 0.005 Mm) , Concave Mirror (Focal Length 20 Cm) , Convex Mirror (Focal Length 20 Cm) , Concave Surface (Focal Length 20 Cm Diameter 50 Mm) , Hooks Law Apparatus (Consisting Of 30 Cm Long Mirror Scale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand) , Mercury (Distilled Liquid Mercury, Grade Std.-Biotech Grade) , Flywheel Apparatus (Thickness: 4.4 Cm Diameter :20 Cm) , Cantilever (Length 100 Cm, Hook At One End, C Clamp) , Light Weight Hanger (Metal Slotted Weight Mechanics Physics Experiment Equipment Set With Hook With Weight Of Each Mass Of The Order Of 50Gm Or 100 Gm) , Inverse Square Law Apparatus (Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter) , Stopwatch (Digital Stopwatch With Ms Count) , High Resistance Box (Resistance Box Plug With 1 To 10 K Ohm Resistance) , Winch Crab Single Purchase With Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut.String, Weight Box With Pan. ] , Winch Crab Double Purchase Without Weight [Experiment Set Up Winch Crab Single Purchase- Fitted With Heavy Cast Iron Wall Brackets The Grooved Wheel Is Of 25 Cm Diameter And Gears Are Machine Cut. ] , Worm And Worm Wheel Single Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Worm And Worm Wheel Double Without Weight [Experiment Set Up Consisting Of Machine Cut Worm Gear Of 25 Cm Diameter, Carrying A Metal Drum On 12 Cm Diameter, And Machine Cut Worm On Steel Spindle Carrying A 12 Cm, Complete With Effort Pulley, String With Pan.] , Wheel & Axle Simple Without Weight [Standard Setup For Lab.] , Simple Screw Jack With Weight [Experiment Set Up Screw Jack ( Weights)All Metallic Construction Accurately Machine Cut Screw With A Pitch Of 5 Mm Carrying A Double Fanged Turn Table Of About 20 Cm Diameter. Fitted On A Heavy Cast Iron Base And Complete With Two Adjustable Pulleys, Cord And Hook. Weights Are Included.] , Combined Inclined Plane & Friction Slide Apparatus Iron Base & With Weight [Standard Setup For Lab.] , Parallel Forces Apparatus [Experiment Set Up Simple Supported Best Type Supported At Its End. For Verification Of Condition Of Equilibrium Of Parallel Forces, Law Of Lever & Forces On Beam Etc. Consisting Of Two Compression Thrust Type 10 Kg Tubular Spring Balances Fixed On Wooden Polished Board, A Wooden Beam With Steel Back Plate. Complete With Two Strups, Hooks & Two 10Kg Weights. ] , To Verify Lami’S Theorem [Gravesand Apparatusboard: Wooden With Metal Base Pulley: Z-Pullies (2 Nos) With Adjustable Distance Weight Set: 5X50 G (3 Sets). ] , Simple Jib Crane Apparatus Iron Stand With Weight [Experiment Set Upwith Consisting Of A Tubular Compression Balance, Pivoted About An Axis Fitted To The Base. The Tie Chain Has An Adjustable Angle Bracket And Fitted With A 10Kg Extension Balance. Completion Wooden Base With 1.2 Meter Jib. With Weights. ] , Mini Drafter, T Square, Protractor, Set Squares, Compass, Divider [Made Out Of Wood. To Be Used In Chalk Board] , Model Of Geometric Constriction (Solid Cube, Solid Primed, Cylinder, Cone, Hexagon, Tetrahedron ) [Made Out Of Wood. To Be Used In Chalk Board] , Amplitude Modulation And Demodulation Trainer Kit [Message Signal:100 Hz To 2.8 Khz, Carrier Signal 28 Khz To 108 Khz,Modulation : Balanced Modulator, Amplifier : Op Amp Based, Demodulation : Diode Detector & Lpf(6Th Order)] , Frequency Modulation Anddemodulation Kit [On-Board Message Signal With Variable Amp/Freq,On Board Carrier Signal Fm Modulation Using Xr 2206Ic,Demodulation Using Pll Detector And Lpf 4Th Order Lpf,Internal Power Supply +5V , +12V/ 500 Ma] , Super Heterodyne Am Radio Receiver Trainer Kit To Measure Sensitivity, Selectivity And Fidelity [On Board Variable Capacitor Tuning,Receiving Antenna,Local Oscillator,Bfo, Rf Amplifier, Mixer,If Amplifiers, Detectors, Agc,Audio O/P Amplifier, Speaker.Frequency Range: 400Khz To 1700Khz,If Frequency: 455 Khz.] , Pam, Pwm And Ppm Modulation And Demodulation Trainer Kit [Provides Sine Waveform Output Of 250Hz, 500Hz, 1 Khz, And 2 Khz With Amplitude Adjustments Of 0 - 5Vp-P. Switch Selectable Sampling Clock Of 4, 8, 16, 32 Khz. On-Board Features Analog Sample Circuit/Output, Sample & Hold Circuit/Output, Flat Top Circuit/Output, 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz.] , Analog Signal Sampling & Reconstruction Trainer Kit [±15V D.C. At 100Ma, Ic Regulated Power Supply, A.F. Signal Generator For Modulating Signal.Sampling Clock Generator To Provide Sampling Clock And Gate Pulse. Modulator Circuit For Flat-Top Natural And S/H Circuit. Demodulator Circuit To Reconstruct Input (Sinewave)] , Telephone Receiver Trainer Kit [Line In Section : One Dot Line Connection Port.Handset : One Handset Connection Port. Keyboard : 4X3 Matrix Keyboard.Dialer : Tone And Pulse. Facilities : Redial Up To 32 Digits, Mute, Redial, Flash, Pause Switches.Indicators : Line In, Hook, Tone And Ringer, Call Mute Section.Control : Ringer Volume Control, Ringer Speed Control.Speech Path : Fully Non-Blocking.Dial Pulse Ratio : 10 Pps + / - 10%.] , 100Mhz Digital Oscilloscope [Bandwidth: 100 Mhz, 2 Analog Channels+ Ext With Probes Included Rise Time: =3.5 Ns, Real-Time Sample Rate Of 1 Gsa/S 1% Dc Gain Accuracy Should Support Rs232/Uart, I2c And Spi Bus Triggers And Decodes Usb And Ethernet Connectivity] , 30Mhz Analog Cro [Dual Trace Dual Channel Oscilloscope. Bandwidth: 20Mhz. Full Bandwidth Sweeping Circuit , Tv-H / Tv-V Synchronization And Trigger-Lock To Observe All Kinds Of Signals Stably. Y Deflection Operation: Y1, Y2, Alt, Chop, Add, Mode.Horizontal Sweep Mode: Auto, Trig, Lock, Single.X-Y Mode Input: X-Axis Yi And Y-Axis Y2.] , 2 Mhz Function Generator [Frequency: 1Hz – 2 Mhz Sine, Square, Triangle, Ttl Output] , Digital Storage Oscilloscope (100 Mhz) [Bandwidth 100 Mhz, Channels: 2+, Display: Tft Color Lcd Of Suitable Size (Capacitive Touchscreen). Sampling Rate: 1 Gsa/S Real Time, Sampling Mode: Normal, Average (2, 4, 8, 16, 32, 64, 128, 256), Peak Detect. Mathematics: A+B, A-B, A×B, Fft (Fast Fourier Transform). Fft Windows: Rectangle, Hanning, Hamming, Blackman. Auto Measurement: Vpp, Vamp, Vmax, Vmin, Vtop, Vbase, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Delay1-2 (Rise), Delay1-2(Fall) ] , Trainer Kit For Rectifier With And Without Capacitor Filter For : — (A) Half-Wave Rectifier, (B) Full-Wave Rectifier, (C) Bridge Rectifier [Transformer Rating : 9-0-9V/200Ma, Rectifiers : Half Wave; Full Wave - Bridge, Center Tapped Rectifier,On-Board Dc Voltmeter : 0 - 20V,On-Board Ac Voltmeter : 0 - 20V,Load : Variable Resistive Load 10K,Filter Circuit : In-Built- Capacitor (3Nos.),In-Built- Inductor (1No.),Input Line Voltage : 230V Ac ± 10%, 50Hz] , Push-Pull Amplifier Trainer Kit [I.C Regulated Power Supply : +6 V.Digital Ac Voltmeter: 0 – 20 V.Digital Ac Milliammeter : 0 – 200 Ma.Set Of Resistances.Set Of Capacitors.Two Transistors Cl 100 And Ck 100.Connecting Wire.] , Fet Characteristics Trainer Kit [Variable Dc Regulated Power Supply Of 0-5V At 250Ma. Dual Range Dc Voltmeter Of 1.5V/15V.Dc Ammeter Of 0-20Ma.] , To Determine Frequency Response Characteristics Of Rc Coupled Amplifier Circuit And Calculation Of Bandwidth, Midband Gain, Input Impedance And Output Impedance For: (A) Single-Stage Amplifier (B) Double-Stage Amplifier [Sine Wave Oscillator 15Hz To 150Khz In Four Ranges With Amplifier & Amplitude Adjustable.Three Decade Resistances Bank In Steps Of 1K, 10K & 100K Per Steps Total Step 30.Two Pnp Transistors.] , Mosfet Characteristics Trainer Kit [On Board Ammeter And Voltmeter,Dual Variable Dc Power Supplies,On Board Mosfet And Fet With Resistors To Perform Experiments] , To Study The Input And Output Characteristics And To Find The H-Parameters Of A Bjt For : — (A) C-E Configuration, (B) C-C Configuration, (C) C-B Configuration [Power Supply 1) 0-1V Dc 2) 0-10V Dc.Meters Dc 65Mm Four Dial V, V , Ma Ua/ Ma.Transistor Cl100/ Similar] , Component Development System [Power Supplies On Boards 0-15 V And 0-30 V, 250 Ma Each Variable.Fixed Dc Regulated Power Supplies 15 V/250 Ma And 5 V/250 Ma.Ac Power Supply 15-0-15 V For Rectifier Applications.Various Components On The Trainer Set. ] , Kcl & Kvl Trainer Kit [Two Dc Ic Regulated Power Supplies 0-12 V/150 Ma, Two Mr65 Square/Digital Meters For Voltage & Current Measurement, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Power Cords 230 V, 50 Hz] , Thevenin’S And Norton’S Theorems Trainer Kit [Power Supply 2?3?0?V, Regulated & Short Circuit Proof Variable Dc Voltage Source – 01 No. Fixed Resistance Of Different Values. Dc Voltmeter.Dc Ammeter. Glass Fuse For Short Circuit Protection. On/Off Switch With Indication Light. Patch Cords Suitable To The Terminals With Board For Easy Interconnection.All Above Accessories Will Be Fitted On Bakelite Sheet Fixed On Box.] , Superposition Theorem Trainer Kit [Instrument Comprises Of Two Fixed Output Dc Regulated Power Suppliesof 12V & 5V At 500 Ma Current, Three Moving Coilmeter, Circuit Diagram Printed On The Front Panel & Connections Ofsupplies, Meter & Resistances Brought Out At 4Mm Sockets. ] , Maximum Power Transfer Theorem Trainer Kit [Ammeter 30Ma Dc. Voltmeter 12V Dc. Power Supplies: Dc Supply Ic Regulated 0-12V Dc, 150Ma. Operated On Mains Power 230V, 50Hz +10% Components Are Mounted On The Panels Are: Resistances 2Watts Variable Resistor Voltage Control Through Potentiometer. Fuse For Short Circuit Protection. Patch Cords 4Mm.] , Reciprocity Theorem Trainer Kit [Instrument Comprises Of One Fixed Output Dc Power Supply Of 12V At 300 Ma Current, Two Moving Coil Meters, Circuit Diagram Printed On The Fornt Panel & Connections Of Supplies, Meters & Resistances Brought On Terminals.] , Series And Parallel Resonant Circuit Trainer Kit [Analog Meters: Ammeter 20Ma Ac. Voltmeter 20V Ac. Components Mounted On The Panels Are: 3 Nos. Of Resistors Selected By Rotary Switch. 3 Nos. Of Capacitors Selected By Rotary Switch. 3 Nos. Of Inductors Selected By Rotary Switch.] , Low Pass And High Pass Filter( Rc & Lc) Constant K Type Trainer Kit [Instrument Comprises Low Pass Circuit Rc Type Instrument Comprises Low Pass Circuit Lc Type Instrument Comprises High Pass Circuit Rc Type Instrument Comprises High Pass Circuit Lc Type Instrument Fitted In Highly Shockproof Plastics Box] , T And ? Type Attenuator Trainer Kit [Instrument Comprises Ofdc Ic Regulated Power Supplies 0-15V/150Ma. Two Mr65 Square / Digital / Round Meters For Voltage & Current Measurement. T And Pie Network Provided On The Board. Variable Resistor Using Band Switch Is Mounted On The Board. Instrument Fitted In Highly Shockproof Plastics Box. Sufficient No Of 4Mm Patch Cords For Interconnection Instruction Manual For Student Workbook. Power Cords 230V, 50Hz] , To Study Standing Wave Pattern For A Transmission Line Of Finite Length With: (A) Open Termination, (B) Short Termination, And © Matched Termination. [Transmission Line : Coaxial Cable 100M ( 25M X 4 Nos) Impedance Matching Resistance : 0 To 100 ( 02 Nos ) Test Generator : 1. Sine Wave : 4 Khz To 4 Mhz. 2. Square Wave : 10 Khz. Interconnections : 4 Mm Sockets On All Input / Output Connections. Test Points : 10 On Board Circuit Mimic : Illustrates Functional Blocks For Ease Of Experimentation Power Requirement : 230V 10% 50Hz, 1 Ac. Accessories Provided : I. Set Of Patch Cords. Ii. Bnc To Bnc Cable. Iii. Bnc To Crocodile. Iv. Detailed Instruction Manual.] , Digital Trainer Kit (Experiment 1. -To Verify The Truth Table Of Not, Or, And, Nand, Nor, Xor, X-Nor With Ttl Logic Gates And Cmos Logic Gates. Experiment 2.- To Realize Different Boolean Expressions With Logic Gates. Experiment 3.-To Realize Half-Adder, Full-Adder, Subtractor, Parallel And Serial Full-Adder. Experiment 4-To Design 1’S Complement, 2’S Complement And 9’S Complement Adder-Subtractor.) [Dc +5V , 400Ma; Dc +12V, 250Ma; Dc -12 V, 250Ma, Dc0 To + 30V: Variable 100Ma,Ac Output: 12V-Ct-12V, 150Ma; Logic Data 8-Bit Debounced Set/Clear Ttl Output With Bicolour Led; Clock Generator I Hz To 200Khz Variable & Manual, Ttl & /Ttl(Complement) With Bicolour Led;Logic Probes 8-Bit 3-State Led Display High, Low, High Impedance; Function Generator Sine, Square, Triangle, 1 Hz To 250 Khz;Bread Boards : 3 X 820 Tie-Points; Total Short Circuit Protection From Any To Any Point On Board] , Complete Setup To Implement The Truth Table Of Encoder,Decoder, Multiplexer And De-Multiplexer. [The Trainer Kit Should Be Able To Verify The Truth Tables Of Truth Table Ofencoder,Decoder, Multiplexer And De-Multiplexer.] , Complete Setup To Design/Construct Parity Generator, Checker And Comparator. [Industry Standard Specification To Perform Relevant Experiments. ] , Flip Flop Trainer Kit [Kit For Verification Of Jk, Sr, D, And T Flip-Flop Truth Tables] , Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design / Construct Programmable Up/Down Counter. [Industry Standard Specification To Perform Relevant Experiments. ] , Complete Setup To Design Controlled Shift Register And Study Their Function. [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Study Different Memory Ics [Industry Standard Specification To Perform Relevant Experiments. ] , A/D & D/A Converter Trainer [Industry Standard Specification To Perform Relevant Experiments. ] , Trainer Kit To Interface Ttl And Cmos Ics. [Industry Standard Specification To Perform Relevant Experiments. ] , 8051 Trainer Kit [Operating Frequency : 10Mhz Crystal,40-Pin Ic Base | 40Pin-Zif Socket,2×16 Char Lcd Display,32 I/O Pins,32Kb-Sram,32Kb-Eeprom.] , Ct-31/51 Or 8031/51 Microcontroller Trainer Kit With Led Display, Usb Interface & Inbuilt Power Supply [Operating At 10/12 Mhz, On Board 8K Ram,8/16K Bytes Of Eeprom,48 I/O Lines,Hexadecimal Keyboard And Six Seven Segment Displays,Rs-232C Interface,Usb Interface] , Ct-31/51Lcdadu8031/51 Microcontroller Trainer With Lcd Display, Usb Interface, Adc, Dac& Inbuilt Power Supply [Trainer Based On 8051/89C52 Microcontroller.On Board 32K Ram.64 K Bytes Of Eeprom.20 X 2 Lcd Display.48 I/O Lines. Onboard Adc & Dac.] , Adc Interface Module [Usb Interface, Adc Module Module 10 Channel 12Bit Ad Sampling Data Acquisition Stm32 Uart Communication Adc Module] , Dac Interface Module [Operating Voltage 2.7-5.5 V. Interface Type I2c. Resolution 12 Bits.] , Lcd Display Module [Display Contents :16 * 2 Characters (5*8 Dots ). Lcd Size :80 X 36 Mm .Lcd Thickness :9.5 Mm.] , Keyboard Interface Module [5X4 Keys Matrix Keyboard. ] , Dc Motor Controller Module [Driver Module : L298n. Motor Supply Voltage (Max.): 46V.Motor Supply Current (Max.): 2A. ] , Stepper Motor Controller Interface Module [Robocraze Stepper Motor(28Ybj-48 Dc 5V 4 Phase 5 Wire) + Uln2003 Driver Board Compatible With Arduino] , Trafic Light Controller Module [Led Traffic Lights Signal Module/Digital Signal Output Traffic Light Module] , Temperature Measurement Module [Electrobot Dht11 Digital Temperature & Humidity Sensor Module For Arduino And Rpi] , Operational Amplifier Trainer Kit ( Ic 741 ) [Inbuilt Variable/Fixed Dc Regulated Power Supplies.Output Voltages : 0-5Vdc (2Nos.) (Variable), +12Vdc (Fixed).Transistor & Components Provided Ic : 741.Transistor : Cl 100 (Npn).] , Active Filter Trainer Kit (Lpf, Hpf, Bpf) [Opamp Based First Order Lpf, Hpf, Bof Trainer Kit (Mi-A14)] , Application Of Ic555 Timer Trainer Kit (Astable & Monostable Mv) [In-Built Regulated Dc Power Supply.On Board Manual Pulse Generator For Triggering The Monostable And Bistable Circuit.Inbuilt Led Output Indicator.Symbols And Diagram Are Printed On Glass Epoxy Pcb.] , Opamp Based Oscillator Trainer Kit ((A) Hartley, (B) Colpitt, (C) Phase Shift, (D) Wein Bridge) [Op-Amp Oscillator Trainer Mi-A13. Frequency 50-60 Mhz.] , Crystal Oscillator Trainer Kit (741 Based) [Industry Standard Specification To Perform Relevant Experiments. ] , Function Generation Kit (Using Icl8038) [Icl8038 Function Signal Generator Sine Triangle Wave Kit Diy Professional K5e8.Uses Icl8038 And High-Speed Op Amp, Higher Accuracy. Low Distortion Sine Wave: 1%.] , Voltage Regulator Trainer Kit (Using Ic723) [0-35V D.C. At 250Ma, Countinously Variable Unregulated Power Supply.D.C. Milliammeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 50Ma And 250Ma.D.C. Voltmeter, 65Mm Rectangular Dial With Switch Selectable Ranges Of 10V And 40V.Ic 723 Fitted On Base.Three Potentiometers.] , Function Generator Trainer Kit [Frequency Ranges: 1? Hz To 1?0? Hz, 1?0? Hz To 1?0?0? Hz Fuse:3?5?0? Ma, Slow Blow Automation Grade: Manual Power Supply:Max 2?3?0?V Ac, 5?0? Hz +/- 1?0?%] , Maxwells Bridge Trainer Kit [The Kit Contains A Bridge With Provision For Connections Of Capacitors And An Unknown Inductor. In Built Ac Supply [ 1 Khz And 2 Vpp ] And Dc Supply [ +5 V ] On Board. Two Nos Dial Resistances [ 50 Ohm To 200 Ohm ] And [ 1 Ohm To 11 Ohm ] In Step. A Dc And Ac Null Detector Using Selector Switch. A Dial Type Variable Capacitor [ Range 0.2 Uf Ro 1.2 Uf ] And Six Nos. Unknown Inductors [ Range 1 Mh To 12 Mh ].] , Lvdt Trainer Kit [Excitation Source Built In Ac Source 2.5 Khz Sine Approx. L.V.D.T. In Non Metallic Structure. Micrometer One (For Displacement) Displacement Range 10Mm. Test Points Sockets At Different Places For Signals. Potentiometer Two For Zero & Calibration Adjust Display (Mm) 3.5 Digit Digital Power Supply Ic Regulated Phase Detection Balanced Demodulator Power Supply Short Circuit &Overload Protected Mains 230V/50Hz Ac] , Strain Gauge Trainer Kit [Strain Gauge: 4 Mounted Upon Cantilever 150X3.5X3.5Mm, Stable Dc Voltage For Strain Gauge Bridge, Opamp Based,Precision Instrumentation Amplifier With Variable Gain,Potentiometer For Zero And Calibration Adjust,3.5 Digit Display For Strain/Weight, 230V 50Hz Ac] , Temperature Transducers Kit Using (A) Rtd (Pt-100) (B) Thermistor. [12 - 0 - -12 V 500Ma To Drive Digital Integrated Circuitry. 5 - 0 - -5 V 250Ma To Drive A To D Converter Signal Conditioning And Amplifying :Analog To Digital Converter. Display : 31/2 Digit Led Display Of 200 Mv Fsd Initial Set : Single Turn Potentiometer To Set Initial Temperature ( Room Temperature) Final Set : Single Turn Potentiometer To Calibrate The Instrument ( Max. Temperature) Select : 2 Way Rotary Switch To Select Rtdand Thermistor. Power On : Rocker Switch To Control Power Supply To The Instrument.] , Calibration Of A Single-Phase Energy Meter By Phantom Loading Trainer Kit [Usage/Application: Lab Experiment Connection:4?-Mm Patch Cord Single Phase Automation Grade:Manual Power:2?0?0? W Voltage:2?2?0?-2?4?0? V] , Calibration Of A Voltmeter Using Crompton Potentiometer Trainer Kit [This Trainer Is Supplied Along With Highly Regulated Dc Power Supplies To Operate The Unit. Further To Calibrate Pmmc Meters, Necessary Ratio Boxes Also Provided. Resistors Used In This Unit For Coarse And Fine Are Very Standard Type Made Of Manganin. This Enable The User To Measure The Potential In A Circuit Close To Micro Volts. Necessary Schematic/Wiring Diagram Printed On The Panel To Follow And Conduct Experiments. User Manual And 4Mm Patch Cords Supplied. Accessories Included: Necessary Dc Power Supplies, Ratio Boxes & Galvanometer Are Provided Alongwith The Unit.] , Cro Demonstration Kit [Crt : 6Rectangular Screen With Internal Graphical 8X10 Division (1Div-1Cm) Vertical Deflection Display : Ch1, Ch2, Add, Alt & Chop Deflection Factor : 5Mv/Div To 5V/Div +3%, 1Mv/Div To 1V/Div, +5% (X5), 10 Steps Rise Time : <17.2Ns Maximum Input Voltage : 250 (Dc + Ac Peak Value) When <1Khz (250V, Dc +Ac) Input Coupling : Ac, Dc & Gnd Polarity Selection : + (Ch2 Only) Display Mode : 1, 10 & X-Y Horizontal Deflection Time Base : 0.2Us/Div To 0.2S/Div, 9 Ranges Sweep Expansion : X10 Accuracy : +3% Triggering Mode : Auto, Norm, Tv-V, Tv-H Triggering Source : Int, Line & Ext. Trigger System Auto : 20Hz-20Mhz Norm : 0.5 Div Int, 0.5 Vp-P Ext Tv-H : At Least 1 Div Or 1 Vp-P Input Impedance : 1Mohm X-Y Phase Difference : <3 Degree, Dc-50 Khz Calibration Waveform : Frequency 1Khz 2%,Voltage 0.5 V 1%, Block Diagram Printed On The Top Panel, Power Requirement: 220 Vac +10% , 50 Hz] , Q-Meter Kit Formeasurement Ofq Of Coils. [Inductance Range:199.9Mµh-19.99H Resistance Range (Ohm):19.99O-19.99M? Capacitance Range:199.9P-1.999?F Capacitance Accuracy: ±(1%±2) Digital Lcr Bridge Meter Power:220 Volts/50Hz ±10%] , Spectrum Analyzer Trainer Kit [Industry Standard Specification To Perform Relevant Experiments. ] , Public Address System Trainer Kit [To Test The Performance Of Loudspeaker And Microphone; Power Output: 100W Rms At 10% Thd Pre-Amplifier Output: 200Mv; Line Output: 1V/ 1K?; Input Channels: Mic: 2Nos; Frequency Response : 65 Hz To 15 Khz +/- 3Db Tone Controls : Bass, Treble, Master 1Control; Speaker Outputs : 4 , 8 , 16 , 70-100V Line Matching; Speakers : 2 Nos; Microphones : 2 Nos(Dynamic Microphone)] , Demonstration Kit Of Black & White Tv Trainer [To Learn The Practical Aspects And Faults Which Would Occur Often In The Black And White Tv. All The Fault Switches Are Provided To Conduct Fault And Observe The Output. The Test Points Are Provided To Determine The Voltages At The Different Sections Of The Tv And Observe The Signal Output Of The Various Sections. The Output Is Monitored On A 20” Picture Tube.] , Demonstration Kit Of Colour Pattern Generator For Colour Tv [They Should Be Able To Make Various Patterns, Including Vertical Bar Patterns, Horizontal Bar Patterns, Circle Patterns, 100% White Patterns, Check Patterns, Horizontal Bar Patterns, Vertical Bar Patterns, Color Bar Patterns, Red Color Patterns, Green Color Patterns, Blue Color Patterns,Yellow Color Patterns, Magenta Color Patterns, And Cyan Color Patterns. Learning Materials To Be Included: Theory, Procedure, Reference Results, Etc.] , Demonstration Kit Of Colour Led Tv Trainer [Display Type: Led; Hd Screen Size: 24 Inch (50Cm) Or More; Display Resolution: 1600 X 900 Pixels Or More; Video Interface: Video Input/ Vga, Hdmi And Or Dvi Input; Audio Output Power: 8W X 2; Receiving System: Pal Bg/I/Dk And Ntsc; Channel Coverage: Vhf-2-12, Uhf21-69; Catv (X~Z+2, S11s41) Mains Supply: 110-260V Ac ± 10%, 50/60Hz; Power Consumption: 35W] , Demonstration Kit Of Dth Trainer Kit [Colour Tft Lcd: 5.7” Tft Lcd; Rf Input: 950 - 2150 Mhz; Rf Output: 470 Mhz Two 862Mhz; Video Output: Pal/Ntsc; Uplink Satellite: Insat 4B; Test Points: 34 Nos.; Included Accessories: Mains Cord, Power Supply, Remote, Dish Antenna With Accessories, Lnb] , Demonstration Kit Of Photocopier [Interface Hi-Speed Usb 2.0 Copy Speed Simplex To Simplex Up To 20 Ppm In A4 (21 Ppm In Letter) Scan Method Color Cis Compatibility Twain, Wia Fault-Creating Facilities For Crum, Thermistor, Stepper Motor, Pickup Clutch, Feed Sensor, Width Sensor, Scanner Stepper Motor, Scanner Sensor, And Printer Door. Various Fault Switch With Test Points Provided On-Board.] , Demonstration Kit Of Fully Automatic Washing Machine Trainer Kit [Semi/Fully Automatic Washing Machine Mechanical Controls 30 Minutes Timer, Wash/Spin Control Atleast 6 Liter Capacity Machine Fault Switches For Wash Motor, Spin Motor, Lid Opening, Buzzer Etc All Faults Are Mounted On Pcb With Enclosure] , Demonstration Kit Of Microwave Oven Trainer Kit [Type: Solo; Capacity: >15 Ltr; Power Consumption: 600 Watt Or More: Child Lock And Alarm, Various Test Points] , Demonstration Kit Of Refrigerator [Industry Standard Specification To Perform Relevant Experiments. ] , Demonstration Kit Of Air Conditioner. [Industry Standard Specification To Perform Relevant Experiments. ] , Tdmpulse Code Modulation Trainer Kit [Crystal Frequency: 12/16 Mhz On Board Generators, 1. Adjustable Amplitude Sine Generator Of 500Hz & I Khz (Synchronised) 2. Variable Amplitude Dc Level (2 Nos.) Input Channels: Two Multiplexing: Time Division Multiplexing Modulation: Pulse Code Modulation Sync Signals: Pseudo Random Sync. Code Modulation Error Check Code: Off, Odd, Even, Hamming Operating Modes: Fast 240 Khz Channel (Approx) And Slow I Khz Channel (Approx) Pc - Pc Communication: 2 Channel Via Rs 232 Baud Rate: Selectable From 300 To 2400 Fault Switches : 8 Nos. Through 8 Way Dip Switch For Troubleshooting At Different Blocks Should Include Various Test Points] , Tdm Pulse Code Demodulation Trainer Kit [2 Channel Time Division Multiplexed Pulse Code Modulation Receiver. Fast (240 Khz/Channel Approx) And Slow (1Hz. /Channel Approx.) Mode Of Operation Pseudo Random Sync. Code Generator For Frame Synchronization. Receiver Clock Generation Using Pll. Error Detection Of None, Even, Odd, Hamming. Error Correction Using The Hamming Code Technique None, Even, Odd, Hamming Parity Selections Two Nos. Of 4Th Order Butterworth Low Pass Filter With Cut Off Frequency Of 3.4 Khz. Four Switched Faults For Fault Selection Block Description Screen Printed On Glassy Epoxy Pcb] , Fdm Transmitter / Receiver Kit [Two Variable Modulating (Sinusoidal) Input Channels With Provision Of Voice Inputs Two Dsbsc Modulators For Frequency Band Translation Of Two Test Signals Two Carrier Generators Two Sets Of Audio Input Amplifier One Adder/Transmission Amplifier Two Demodulators Two Low Pass Filters For Smooth Output] , Ask / Psk / Fsk Modulation And Demodulation Kit [The Kit Should Have An Integrated Ask / Psk / Fsk Modulation And Demodulation. Various Functional Block Diagrams Are Provided On-Board For Teaching/Training. Test Points To Visualize The Signals On Oscilloscopes] , Microwave Test Bench (Klystronbased) [Complete Klystron-Based Test Bench Study Of The Characteristics Of The Klystron Tube And To Determine Its Tuning Range, To Determine The Frequency & Wavelength In A Rectangular Waveguide Working On Te 10 Mode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , Microwave Test Bench (Gunn Based) [To Study The V-I Characteristics Of Gunn Diode, To Study The Voice Communication By Using Microwave Test Bench, To Study The Following Characteristics Of Gunn Diode, It Should Also Be A Ble To Study Characteristics Of The Directional Coupler, Attenuator And Isolator.] , 24 Awg Tinned Single Strand Jumper Wire Spool Blue Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Green Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Red Colour [90 Meter Spool] , 24 Awg Tinned Single Strand Jumper Wire Spool Black Colour [90 Meter Spool] , Flexible Electric Wire [2 Core, Twisted Flexible, Red And Black, 0.5 Sq Mm Copper Core, 50M Length] , Soldering Wire [Flux Core, Coil Type (Wire Of 100Gm )] , Inductor 1 Mh [8X10 Mm Radial Leaded Power] , Inductor 10 Mh [8X10 Mm Radial Leaded Power] , Led Red, Green, Blue, White Colour. Fifty Numbers Of Each Colour Led. [0.5W, Through Hole Type] , Ic 7400 [Ttl Ic-Quad 2-Input Nand Gate] , Ic 7402 [Ttl Ic-Quad 2-Input Nor Gate] , Ic 7404 [Ttl Ic-Hex Inverter Gate] , Ic 7408 [Ttl Ic-Quad 2-Input And Gate] , Ic 7432 [Ttl Ic-Quad 2-Input Or Gate] , Ic 7486 [Ttl Ic-Quad 2-Input Xor Gate] , Ic 7474 [Ttl Ic-Dual D Positive Edge Triggered Flip-Flop, Asynchronous Preset And Clear] , Ic 7476 [Ttl Ic-Dual J-K Flip-Flop, Asynchronous Preset And Clear] , Ic 7490 [Ttl Ic-Decade Counter (Separate Divide-By-2 And Divide-By-5 Sections)] , Ic 7495 [Ttl Ic-4-Bit Shift Register, Parallel In, Parallel Out, Serial Input] , Ic 74200 [Ttl Ic-256-Bit Ram (256X1)] , Ic 74147 [Ttl Ic Encoder] , Ic 74138 [Ttl Ic 3 To 8 Line Decoder] , Ic74151 [Ttl Ic Multiplexer] , Ic74138 [Ttl Ic Demultiplexer] , Ic 74169 [Ttl Ic Up-Down Counter] , Ic 74180 [Ttl Ic Parity Checker/Generator] , Ic 74Ls83 [Ttl Full Adder With Carry Ic] , Ic 74330 [Ttl Ic-Pla (12 Inputs, 50 Terms, 6 Outputs)] , Ic 4077 [Cmos Ic Xnor Gate] , Ic 4001 [Cmos Ic Nor Gate] , Ic 4011 [Cmos Ic Nand Gate] , Ic 4070 [Cmos Ic Exor Gate] , Ic 4071 [Cmos Ic Or Gate] , Ic 4077 [Cmos Ic Ex-Nor Gate] , Ic 4081 [Cmos Ic And Gate] , Ic 4093 [Cmos Ic Nand Gate] , Ic74ls47 [Bcd To 7-Segment Decoder/Driver Ic (7447 Ic) Dip-16 Package] , Lts542 [7-Segment Display - Common Anode] , Lts543 [7-Segment Display - Common Cathode] , Ic Dac0808 [Dac0808 8-Bit Digital To Analog D/A Converter Ic Dip-16 Package] , Ic Adc0809 [Adc0809 8-Bit A/D Converter With 8-Channel Multiplexer Ic Dip-28 Package] , Ic723 [Voltage Regulator Ic Input Voltage Up To 40V Output Voltage Adjustable From 2 To 37V Positive Or Negative Supply Operation Series, Shunt, Switching Or Floating Operation Output Current To 150Ma Without External Pass Transistor Adjustable Current Limiting] , Icl8038 [Function Generator Ic Wide Frequency Range - 0.001Hz To 300Khz Variable Duty Cycle - 2% To 98% High Level Outputs - Ttl To 28V Simultaneous Sine, Square, And Triangle Wave Outputs] , Ad633 [Analog Multiplier Ic 4-Quadrant Multiplication Low Cost, 8-Lead Soic And Pdip Packages Complete—No External Components Required Laser-Trimmed Accuracy And Stability Total Error Within 2% Of Full Scale Differential High Impedance X And Y Inputs High Impedance Unity-Gain Summing Input Laser-Trimmed 10 V Scaling Reference] , Lm566 [Vco Ic Wide Supply Voltage Range: 10V To 24V Very Linear Modulation Characteristics High Temperature Stability Excellent Supply Voltage Rejection 10 To 1 Frequency Range With Fixed Capacitor Frequency Programmable By Means Of Current, Voltage, Resistor Or Capacitor] , Ic Ne555 [Ne555 Timer Ic Dip-8 Package, Pack(Set) Of 30 Ics] , Ic 741 Op-Amp (Dip) [741 Ic - Dip Package - General Purpose Op-Amp Ic, Pack(Set) Of 50 Op-Amps] , Transistor 2N3904 [Pack (Set) Of 20 Transistors] , Transistor Bc107b [Pack (Set) Of 20 Transistors] , Diode 1N4007 [Pack (Set) Of 50 Diodes] , Fet- Bfw10 [Pack (Set) Of 50 Field Effect Transistors] , Zener Diode 5.6V, 1W [Pack (Set) Of 20 Zener Diodes] , Potentiometer 1 K?, 10 K?,100 K? Power Rating: 1W [20 Nos Of Each Value] , Wire Stripping Pliers, 6 Inch Long [Stainless Steel, Rust Resistant.] , Long Nose Mini-Pliers [Stainless Steel, Rust Resistant.] , Resistor 33O, 56O, 68O, 82O, 100O, 120O, 200O, 220O, 270O, 330O, 390O, 470O, 680O, 1K?,1.5K?. Maximium Power Rating 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Resistor 2.2K?, 2.7K?, 3K?, 4.7K?, 5.6K?, 6.8K?, 8.2K?, 10K?, 20K?, 36K?, 56K?, 68K?, 100K?, 470K?, 1M?, 2M? Maximium Power Rating: 1/4W [Pack(Set) Of 50 Nos Of Each Resistor Value] , Disk Ceramic Capacitor Of Values 220 Pf, 0.01 ?F, 0.024?F, 0.1?F, 0.24?F [Pack(Set) 25 Nos Of Capacitors For Each Valueh] , Disk Ceramic Capacitor Of Values 10?F(63V), 100?F, 220?F, 470?F(50V) [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Polypropylene Capacitor Of Values 0.001 ?F,0.01 ?F, 0.1 ?F, 0.22 ?F [Pack(Set) Of 25 Nos Of Capacitors For Each Value] , Tantalum Capacitor 10 ?F (25 V) [Pack(Set) Of 25 Capacitors] , Incandescent Bulb, 40W, 100W, 200 W [With Tungstenfilament And B22 Connector]
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 10
West Bengal View Result →
4.
Defence #11097521 AOC
Tender For Provision Of One Mega Watt Solar Power Project Under Ge (I) (P) No 2.; 1 Supply and fixing of MS fabricated office container of size 15x8x8.5 feet with toilet cabin of size 5x4 feet for SCADA panel and local monitoring for accomodating portable shelter , office, or living space in high alttitude cold region with including PCC flooring work for installation of container including fixing arrangement completeall as specified and directed.Location conditionTemparature range -30 °C to +25°CAltitude -3500m above sea levelwind speed upto 120 km/hSnow load high (snow accumulation on roof)Readymade container shall include the following(a) Attached toilet with EWC/IWC pressure jet gun, water tap, exhaust fan, corner wash basin, tiles flooring, water tank stand , gyser provision, wall mixer and other accessories required for said locations conditions. 2 (b) Container shall include bottom frame 100mmx50mm C channel ISI marked, Top frame of size 50mmx50mm MS square pipe ISI marked , stiffener bottom 100mm x50mm, 50mmx25mm, 25mmx25mm MS square pipeISI marked stiffener top 50mmx25mm, 25mmx25m MS square pipe ISI marked, side post 50mmx50mm, 50mmx25mm MS square pipe ISI marked, Side wall stiffness specially formed CR sheets of thicknes 1.2mm internal wall panelling 8mm thick MDF and all vertically and horizontal corner will be nealty and smoothly finished with aluminium section and L angle, Roof outside 1.2mm thick sheet of make properly sloped and water tight, false ceiling 9mm thick and smoothly finished with aluminium section and L angle, flooring 18mm thick cemented board of make visaka industries will be fixed by means of self taping screw and 1.5mm thick PVC vinyl carpet will be fixed on the panel (100% water termite and dimensional proof with veyl carpet) Aluminium windows double shutter sliding aluminium powder coated windows of thickness of 1.2mm with 4mm thick glass of make saint Gobin for all windows safety grill from outside and canopy above the floor frame work by tubular pipe of 25x25, Door with lock and handles with hydraulic door closer. Insulation 25mm thick glass wool insulation of density 65kg/m3 on side wall and 50mm on ceiling , all wiring will be PVC insulated copper wires of ISI quality, suitable for 240 volts 50 bukhead, switches and socket of 6Amp of ISI make. Split air conditioner point 16Amp alongwith seperate MCB earthing point will be provided for safety. Outside painting with 1 coat of Epoxy primer with 2 coats of epoxy paint and specially formed hooks for easy lifting and shifting. 3 Material and Labour for Plain fillets 2nd class softwood . square, rectangular or triangular in section, clean sawn, secured with screws of size exc 13 and not exc 25 Sqcm complete all as specified and directed. 4 Material and Labour for for prepration of wooden surfaces and applying a coat of pink primer for filletsof surface of any description not otherwise described over 10cm in width or girth complete all as specified and directed. 5 Material and Labour for50mm thick bonded mineral wool blanket slab made from rock, density 48kg/Cum and fixed as per manufactures instruction complete all as specified and directed. 6 Material and Labour for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails on walls complete all as specified and directed. 7 Material and Labour for 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with nails on ceiling complete all as specified and directed. 8 Material and Labour for cement concrete type D2 1:4:8 (40mm graded agg)as in foundations filling mass concrete and all as specified and directed. 9 Material and Labour for Pre-cast cement concrete block masonry with solid blocks in 1:3:6 type C-1 using20mm graded crushed stone aggregates, exc. 10 cm in width or girthand setting in mortar 1:6, complete all as specified and directed. 10 Material and Labour for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in flooring finished even and smooth without using extra cement complete all as specified and directed. 11 Material and Labour for renderring 15mm thick in CM 1:4 on fair faces of concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. 12 Material and Labour for renderring 15mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified and directed. 13 Material and Labour for Walling of random rubble masonry, uncoursed well bonded bedded and solidly hearted built in CM 1:4 and flush pointing the surface in contact with earth in same mortar as the work proceeds complete all as specified and directed. 14 Supply and fixing of50mm thick PUF insulated water tank of capacity 5000 litres complete all as specified and directed. 15 Supply and fixing of50mm thick PUF insulated water tank of capacity 1000 litres complete all as specified and directed. 16 Supply, installation, errecting ,testing and commissioning of On grid connecting on ground Mono Perc half Cut Bifacial Solar photo voltaic (SPV) generation plant of capacity 825KWp DC capacity at standard test condition and750 KW AC capacity (Net capcity after derating), at CHUMATHANG for fixed on module mounting structure without tracking component including solar grade copper cable of suitable sizes upto Invertor,UPS for auxilliary supply to SCADA, string array combiner/ array junction boxes comprising of following sub components/sub systems including all necessary protection, control switches and relays as required for smooth functioning of the system and meeting the specifications as given and directed by Engineer-In-Charge, the quoted rates includes all components/accessories as given below and required from Solar panel to upto step up transformer 1000 KVA incomer termination complete all as specified and directed. 17 (A) Solar photo voltaic plant- : To obtain cumulative 825KWp, three tables of nearly equal size table (varaiation of 5% between table size is permissible) ofthe input of mono perc Half Cut Bifacial silicon solar PV modules of minimum or more than 540/545 Wp with minimum or more than 144 Nos solar cells preferably per module of standard size and weight as per NISE standard , frame anodised aluminium frame (double walled) with junction box IP 65 rated , each having efficiency more than 21% at standard test condition, fill factor more than 0.79 performance ratio equal to and greater than 78 % & made of high transmittivity glass as per NISE standard tempered and glass front surface shall give high encapsulation gain. (transmittance above 90% and bending less than 0.3%) Electrical parameters of 540/545 Wp solar PV module under STC of irradiance 1000 W/m2 , AM 1.5 Spectrum at temperature 25° C will be as under or higher :-Min Peak power Pmax : 540/545 Wp or higher, Current at Pmax Ipm : 12.97A Voltage at Pmax Vpm : 41.65 Volt Short circuit current Isc : 13.85 A Open circuit voltage Voc : 49.50Volts , Maximum series fuse rating : 30A (i) Rated output of modules shall have positive tolerance of minimum 3% & no negative tolerance is allowed. (ii) It shall perform satisfactorily in relative humidity 100% with temperature -35° C to +35° C (Cell) and should withstand wind 198 Km/Hr on the surface of the panel. (iii) PV modules must be warranted for their output peak watt capacity, which shall not be less than 90% of the initial value at the end of 10 years and 80% of the initial value at the end of 25 years. (iv) The temperature co-efficient for the module shall be suitable for CHUMATHANG (UT Of Ladakh) climatic conditions. Variation of higher capacity Solar PV panel is permissible subjected to that performance parameter of the panel shall be equal or better than given above.v) PV module must confirm to latest edition of IEC 61215/IS14286 and as specified here-in- after in particular specification In addition, the modules must confirm to IEC 61730 Part-I & II for construction and testing & safety qualification. (vi) It shall also in conformity of latest technical specifications issued by MNRE from time to time (vii) Provision of earthing & earth strip/cables etc. for earth for solar PV module/Array etc. as per latest IS/MNRE norms to be provided and the cost of the same is to be included in this item and no extra amount will be paid to the contractor on this account.Notes: On SPV (i) The specifications and capacities of plant equipments shall be designed to confirm and achieve the minimum of efficiency and performance guarantees as laid down in this bid documents. These design details and other technical details shall be submitted by contractor on commencement of contract as early as possible but not later than one month(ii) The installed system should be such that during the day, the power needs should be first met by Solar energy. In case the solar energy production is less than the required, the deficit power should be pulled from the exsiting DG set supply .(iii)The contractor shall obtain the approval of make for the proposed SPV module from accepting officer complete system of 825 KWp Solar photo voltaic (SPV) (iv) Any necessary item required for functioning of SPV but not catered in the contract will be deemed to be included in the quoted rate and nothing extra will be admissible on this account 18 .(v) Site clearance incl removal of boulders to a distance 250 m to 500m to be carried out before execution of work. Amount required for site clearance is deemed to be inclulded in the amount quoted by Contractor against this item. Contractor is advised to visit the site before quoting the rate. (vi) Country of origin for solar cell & PV module must confirm to ALMM APPROVED LIST OF MNRE.(B) String array combiner/Junction Boxes: Supply & fix suitable Numbers of dust, vermin and waterproof Array string array combiner/Junction Boxes and main junction boxes made of FRP/Thermo Plast with IP65 protection in compliance with IEC62208 and shall be sunlight /UV resistant a well of fire retardant including over voltage protection, surge protection and maintenance free earthing as per relavant standard. The string array combiner/Junction boxes shall have suitable arrangement of followings:(i) Strings are required to be connected to the busbar through individual fuses. Provide arrangement fordisconnection for each of the groups (ii) Provide a test point for each subgroup for quick faultlocation & to provide group array isolation. (iii) Each array junction box will have suitable by pass &reverse blocking diodes for maximum DC blocking voltage of 1500V with suitable arrangement for its connection. Reverse blocking & by-pass diodes shall work for temperative extreames & shall have efficiency of 99.98% conformed by appropriate IEC standard. Note:- String array combiner/ junction box shall be carried out as per approved SLD.(C) Cabling : (i) Supply and fixing suitable size of XLPO insulated copper cable as per load of solar grade, 1800 V DC/1100 V AC or higher DC voltage rating, confirming to TUV 2 pfg 1169/08.2007 PV1F and latest IEC codes & IS codes for Solar Cables. (ii) All cables and connectors for use of installations shall be of solar grade which can withstand harsh environment conditions including high temperature, UV radians, rain. humidity, dirt, burial and attack by moss and microbes for 25 years and voltage as per latest IEC/IS in standards. (iii) All cables/wires shall be provided with UV resistance printed copper ferrules for DC side. (iv) Size of cable from PV module to invertor shall be minimum 6 sqmm 1 core multistranded copper UV protected solar cable to be provided. (v) Cable Batch No./Drum No., IS code & size make should be printed/embossed at every one metre. (vi) The wiring of modules interconnection shall be in suitable size GI/HD pipe. (vii) Size of wire - 3.70mm dia with tolerance limit (+/ -) 0.08mm. (viii) Size of aperture - 80mm x 100mm (ix) Woven double twisted, hexagonal shaped Zn + PVC coated wire mesh type 80 x 100mm of wire 3.70mm dia wire as per IS 16014. The wire used for the manufacture of wire mesh shall have minimum tensile strength of 350N/mm2 and elongation shall not be less than 10% in accordance with IS 16014.To be laid in DWC pipe of suitable size. (xi) Solar inverter to ACB Panel, connection aluminium XLPE conductor cable of size 185 sqmm x 3C 1.9/3.3 KV rating Note : Cost of interconnecting copper cable (AC & DC), Al XLPE cable from Solar Invertor to ACB panel and cable tray above upto inverter and LT panels and upto LT side of transformer as per site requirement at the location as directed deemed to include in the item quotated rates and no extra payment will be made to contractor on this account. LT Panel shall be paid seperately. 19 (D) Module Mounting Structure (MMS) : Supply, design & fixing support structure MS hot dipped galvanised (80Micrones) including PCC 1:2:4 type B-1 for each support / foundation for civil works (excavation and earth work cutting, grouting, PCC etc.) and fixing the mouting arrangement suitable for PV solar modules & to withstand minimum horizontal wind speed of 198km/hr. The mounting structure is of mild steel hot dipped galvanised. The array structure shall be so designed that it will occupy minimum space without sacrificing the output from Solar PV panels. Nut bolts, supporting structures including module mounting structures shall have to be adequately protected from atmosphere and weather prevailing in the area. All fastners shall be of stainless steel of grade SS316. Two numbers of anti-theft fasteners of stainless steel on two diagonally opposite corner of each module shall be provided.Note: (i) Cost of interconnecting copper cables along with cable trays ( floor/ wall mounted ) suitable to accommodate solar grade cables & cables upto inverter is included in the item and no extra payment will be made to contractor. (ii) The module mounting structure shall be carried out as per approved drawing of foundation MMS. MMS foundation shall be designed as per IS 456:2000 and IS 13920:2016 and drawings shall be approved by GE before execution. (iii) The MMS stub/column,rafter,purlin ,ties and bracing members shall conform to following indian standard :IS 2062 -Hot rolled medium and high tensile structural steel ,IS 811-Cold formed light gauged structural steel section ,IS 1161-steel tube for structural purposes, IS4923- Hollow steel section for structural use. Minimum grade of steel sections for conforming to IS 811 and IS 4923 shall be E350 conforming to IS 2062 and Yst 310 conforming to IS 1608 respectively.(E) Lightning Protection for PV Array :- Supply & fix Lightning Arrestor of the required number of suitable Early Streamer Emission (ESE) lightning arrestors installed in the array field. Lightning arrestors/surge arrestors shall conform to IEC 60099-4 or IS:3070 except to the extent modified in the specifications. Arrestors shall be of hermetically sealed units, self-supporting construction, suitable for mounting on lattice type support with the following :-(i) The air terminal should be capable of racking the lightning stroke 60 micro seconds earlier as compare to passive lightning rod. (ii) The air terminal is Early Streamer Emission (E.S.E.) type which shall be fixed at the top of a GI elevation pole with base so as be at least 2 meters above the structure to be protected. Its height above roof level would be dependent on the level of protection and the protection radii required (iii) The air terminal should be working on the principle of early streamer emission using non-radioactve technology, needing no external power source. (iv) The air terminal is of stainless steel and it has qualified diameter to resist high values of lightning currents. (v) Roof connecting pipe should be capable of withstand in lightning strikes having dimension 50mm ID and 60mm OD. The terminal adaptor having inner dia 60mm OD. Lightening protection shall be provided as per approved Drg. 20 (F) Earthing system for PV array field :-Earthing system shall comply with latest revision andamendment of the relevent IEC standard and IS codes. (i) All PV module ,module mounting structure (MMS) and string monitoring unit (SMU) structures in the PV erray field shall be connected to the earthing system (ii) Each PV module frame shall be earth using copper wire of sufficient cross section area. Earthing complete with copper earth plate electrode 600×600 ×3.15 mm thick electrode, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level connected to 20x3 mm copper strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and 40mm dia GI pipe light grade for protection of earth strip and 20mm dia meduim grade for water funnel with wire mesh complete connected to earthing test point as per SSR Part-I 2009 all as specified and directed including testing on completion.NOTE:- Cost of all Copper plates earthing equipments including Copper earth strips from equipments to earth pit is deemed to be included in quoted rates.(G) Solar Inverter : Supply, fixing, testing and commissioning of minimum of suitable capacity in suitable Nos as per 250/255 KW (Total capacity of Inverters shall not be less than 750/755 KW after derating with three inverter) for CHUMTHANG 50 Hz , 3 phase 800V,185A Grid Connected Solar inverter outdoor type suitable to convert DC power of solar PV module/array to AC for further feeding to stepup transformer conforming to IEC-61683 for efficiency, IEC-62109(1&2) or equivalent for safety & IEC-62093 for reliability. The input D.C. tech specification of inverter are as under and as per approved design.(i) Operating temperature :-40ºC to + 35ºC,(ii) Relative humidity (Non condensing) upto 95%.(iii) The inverter shall consist of associated control, protection, data loging device and remote monitoring hardware. the inverter shall be suitable for operation at Chumathang .Alt 4200 mtr and min - 40ºC temperature.(iv)The inverters shall have minimum protection to IP65 and minimum European efficiency 99% load as per IEC 61683 standard.(v) The inverter shall adjust voltage and frequency levels to suit the existing DG Sets/AC power supply. (vi) The inverter shall be self-commulated with pulse width modulation (PWM) technology and shall be capable of synchronize maximum within 1 minute.vii) Maximum power point tracker (MPPT) conforming IEC- 62093 shall be integrated in the inverter to maximize energy drawn from the solar PV array. (viii) The inverter shall include appropriate self protection & self diagnostic feature to protect itself and the PV array from the damage in the event of inverter component failure or from parameters beyond the inverters safe operating due to internal or external causes. 21 (ix) Inverter shall have protective arrangement against ground leakage faults, over voltage & over current. (x) Inverter shall have arrangement for adjusting DC input current & shall trip against sustainable fault down stream and shall not restart till fault is rectified. Notes: (i) If the solar inverter as specified here-in-before is not available in the market , contractor will provide the same of higher capacity as available in the market without any extra cost. (ii) All suitable size of copper cables as per load requirement from SPV systemto inverter for interconnection purpose shall be provided by the contractor and deemed to be included in quoted rates. (iii) Cost of all Copper plates earthing equipments including Copper earth strips from equipments to earth pit is deemed to be included in quoted rates.(H) Uninterrupted power supply(UPS) : Supply, installation, testing & commissioningof 110V/40A Float Cum Boost Battery Charger unit includingbattery bank comprising 50 Nos of 2 Volts-65 AH sealed maintenance free battery.The CCCV battery charger consisting ofcopper wound,air cooled transformer, 01 Set single phase full wave bridge rectifier consisting ofdiodes andSCRs, liberally rated mounted on heat sink andcomplete with resistor/condenser network for surge supperssion .During auto float mode automatic changeover shall take place from float mode to boost mode and vice versa, 01 Set of solid state constant potential controller to stabilize the DC output voltage of the float cum boost charger, 01 No electronic controller , DCdigital ammeter,DC digitalvoltmeter, Potentiometer , DC, MCB for reverse battery protection . The charger should have alarm annunciation with visual and audible alarm with manual reset facility forfuse fail alarm. Float cum boost battery charger and DC distribution board shall be housed in powder coated sheet steel cubicle with panels of 1.6mm thickness , louvers for ventilation , gland plate will be provided for cable entry from bottom .The battery charger shall be divided into two compartments.The upper compartment shall house the battery charger & DCDB with all necessary controls. The lower compartment shall be suitable for housing the batteries. Tech specification shall be as under:-(a) Input working voltage-180 -270 Volts(b) Nominal Input Voltage - 230 V , AC , 50 Hz,1 (c) On load input power factor- > 0.8 (d) On load unit watt efficiencies-> 80%(e) No load losses of complete charge-< 10% (f)Ripple contents on the load (RMS)= 1% to 5% (g) Over load - 110% for 30 minutes and will give visual indication for over load condition. (h) Boost charging - 2.4 V/Cell . (j)Float charging -2.15 V/Cell (k)Float cum boost charging-Automatically changes from one state to another state as per battery condition and will give the visual indication for either float or boost based on charging mode. (l)Reverse polarity -No damage will caused .A visual indication for reverse polarity will appear with an audio alarm. (m)Short circuit-MCB protecton provided. Make of battery charger. Statcon/Sinetrac/Amar Raja Make of batteries. Exide/Amaron/Okaya(n) The battery bank system shall be designed to supply power to following loads :-(i) SCADA(ii) Inverter auxillairy supply 22 (iii) Capacity of battery bank shall be done considering the above mention load at power factor of 0.8 lagging inclusive of 10% design margin at 50ºC.Note:- All suitable size of copper cables as per load requirement for interconnection to above loads here-in-before shall be provided by the contractor and deemed to be included in quoted rates(J) DATA ACQUISITION SYSTEM/PLANT MONITORING & SCADA :- Supply,fixing,testing and commissioning of SCADA system Monitoring system with 65 inch Screen at site with Local LDMS and for Remote Monitoring 55 inchs screen in Engineer-in-charge office to be provided for the performance of the SPV on cloud. plant, inverter ,power, array voltages, array currents & AC parameters,energy yield, temperature,irradiance level etc. and it could provides flexible interface to facilitate PC based inverter monitoring and control via GPRS modem and internet/ethernet connection. This should have include web visualization system and data logger with integrated ethernet port. (i) Data acquisition System shall be provided for each of the solar PV plant. (ii) Data Logging Provision for plant control and monitoring, time and date stamped system data logs for analysis with the high quality, including latest version available of PC & Printer. Metering and Instrumentation for display of systems parameters and status indication to be provided (iii) Solar Irradiance: An integration Pyranometer/Solar cell based irradiation sensor (along with calibration certificate) provided, with the sensor mounted in the plane of the array. Readout integrated with data logging system. (iv) Temperature: Temperature probes for recording the Solar Panel temperature and ambient temperature to be provided complete with readouts integrated with the data logging system.(v) The parameters like AC Voltage, AC Output current, Output Power, Power factor, DC Input Voltage, DC Input Current, Time Active, Time disabled, Time Idle, Energy Produced, Protective function limits (Viz-AC Over voltage, AC Under voltage, Over frequency, Under frequency ground fault, PV starting voltage, PV stopping voltage etc are accessible via the operating interface display in real time separately for solar power plant. (vi) All major parameters available on the digital bus and logging facility for energy auditing through the internal microprocessor and read on the digital front panel at any time and logging facility (the current values, previous values for up to a month and the average values) should be made available for energy auditing through the internal microprocesor and should be read on the digital front panel. (vii) PV array energy production: Digital Energy Meters to log the actual value of AC/DC voltage, Current & Energy generated by the PV system provided. Energy meter along with CT/PT should be of 0.5 accuracy class. (viii) Computerized DC String/Array monitoring and AC output monitoring shall be provided as part of the inverter and /or string/array combiner box or separately (ix) String and array DC Voltage, Current and Power, Inverter AC output voltage and current (All 3 phases and lines), AC power (Active, Reactive and Apparent), Power Factor and AC energy (All 3 phases and cumulative) and frequency shall be monitored. (x) Computerized AC energy monitoring shall be in addition to the digital AC energy meter. 23 (xi) The data shall be recorded in a common work sheet chronologically date wise. The data file shall be MS Excel compatible. The data shall be represented in both tabular and graphical form (xii) All instantaneous data shall be shown on the computer screen. (xiii) Provision for Internet monitoring and download of data including recharging shall be also incorporated till the duration of contract. (xiv) Software shall be provided for USB download with life time license and analysis of DC and AC parametric data for individual plant (xv) Remote Server and software for centralized Internet monitoring system shall be also provided for download and analysis of cumulative data of all the plants and the data of the solar radiation and temperature monitoring system. (xvi) Ambient /Solar PV module back surface temperature shall be also monitored on continuous basis. (xvii) Simultaneous monitoring of DC and AC electrical voltage, current, power, energy and other data of the plant for correlation with solar and environment data shall be provided. (xviii) Remote Monitoring and data acquisition through Remote Monitoring System with latest software/hardware configuration and service connectivity for online/real time data monitoring/control complete to be supplied and operation and maintenance/control to be encurred by the supplier. Provision for interfacing these data on Engineer-In-Charge Computer/display device and portal.NOTE:- The cost of all equipments , internet, ethernet connections, connected cables, Server, printer etc. are included in this item All licensee of windows server, MS office or any other software required for functioning of SCADA is deemed to be included in quoted rates for life time. Recharge of GPRS/3G/4G/5G network for 5 yrs from date of completion shall be reponsibilty of contractor and rates quoted are deemed to include the same. Training: On successful commissioning of the plant, training shall be provided on Plant operations and maintenance to a team (Engineers and Technician/Operations) as nominated by GE for 07 days at the time of handing over of solar plant after completion of phase-I.K) WEATHER MONITORING SYSTEM : Complete one set for Chumathag As a part of weather monitoring system the contractor shall provide the following measuring instruments with all necessary software and hardware required to integrate with SCADA.(i) Pyranometer : The contractor shall provide minimum 04 Nos of secondary standard pyranometer (ISO 9060 classification alongwith necessary assessories for measuring incidental solar radiation at horizontal and inclined plane of array. Specificiation of the pyranometer shall be asfollows:- Spectral response : 0.31 to 2.8 micron ,Time response (95%) : Max 15 second ,Nonlinearity ± 0.5% ,Temperature response : ± 2% ,Tilt error <± 0.5% ,Zero offset thermal radiation ±7W/Sqm ,Zero offset temperature change ± 2 W/Sqm ,Operating temperature range O ºC to 80ºC ,Non stability Maximum ±0.8% ,Resolution minimum +/- 1 W/Sqm : Output Analog 4-20 mA, ,Digital RS 485 Each instruments shall be supplied with necessary length of cable calibration certificate with calibration ,traceability to world radiation reference(WRR) or world radiation centre shall be furnished alonwith the equipments.The GE reserves the right to check the calibration at the expense of the contractor. 24 The signal cable length shall not exceed 20 m .The contractor shall provide instrument manual in hard and soft form.(L) Protection switch gears: Supply, installation, testing and commissioning of factory made outdoor type, LT panel weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick with internal partition of 1.6 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 2000 Amp, outdoor type , frame factory fabricated , duly powder coated painting having thickness not less than 100 microns provided suitable gasket, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system, including the following :- (a)ACB 1250 Amps capacity adjustable type , 4 pole 50 KA, 800 V, 50 HZ draw out type breaking capacity 50 KA( Icu=Ics=Icw=50KA) microprocessor protection. (b) MCCB 400 A, 4 pole, 415 volts, 50 Hz - 03 Nos (C) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 800 V duly moounted on porcelain insulators -01 Set (d) Digital amp meter 3 ph programmeable type with suitable1600 Amps -01 Set (e)Digital volt meter 3 ph programmeable type with suitable0- 800 volts -01 Set (g) CT 1250/5A/5A, PT 100VA CL 0.5/3P (h) LED phase indicator (RYB )-01 Set. All DC & AC circuits shall be suitably protected using appropriate circuit breakers and isolators, fuses and relays annunciator & system condition displays. Protection switchgears on AC side shall have LT ACB 1250 Amps capacity adjustable type , 4 pole 50 KA, 800 V, 50 HZ draw out type breaking capacity 50 KA( Icu=Ics=Icw=50KA) microprocessor protection based with overload ,short circuit over voltage, under voltage, over frequency , under frequency , earth fault and instantaneous over current protection unit , electrically operated with manual spring charge facility , having indication for earth /over load /overvoltage/ under voltage/ over frequency/ under frequency complete with digital meter. Note:- Panelshall be provided as per approved SLD.(M) Cable Duct / Conduit DWC Pipe : Cable duct/ cable tray of appropriate size from solar panel to inverter/ transformer and cable duct made from PCC etc incl MS plates duct cover 6 mm thick (plain orchequered) channels square cut or notched ( ordinary & counter sunk) forming holes without any attachment complete all as spd and directed.Note: (a) There should be provision of vertical separation between power and control cable duct. (b) Cable ductshall be provided as per approved drg . 25 Supply, installation testing and commissioning of outdoor type step up transformer Inverter duty type low losses of 1 MVA, 0.800/11KV, 3 phase, 50 HZ, ONAN Cooled oil immersed copper wound out door type Step up Transformer delta/delta (Δ/Δ) complete with first oil filling and other standard fitting / accessories and Off load tap changer (Taping Range ± 5% in step of 2.5% each) suitable for feeding supply generated from solar power plant to existing transmission line with Including the following : 26 HV Bushing 33 KV and LV Cable Box suitable for chumathang area of Alt 4200 m along with necessary bus bars with adaptor box suitable for terminating incoming cables from inverter. Marshalling Box (having TTB Only ) all as specified and directed (i) Buchholz Relay trip contact and shut off valves. (ii) PRVRelay Trip (iii) Oil temperature indicator 150 mm dia with alarm and trip contact. (iv) Winding temperature indicator with alarm and trip contacts (v) Marshalling box 200 TB (MK) -03 Nos (6 No of terminal , 3 phase primary and 3 phase secondary, Bolted or plu in type terminal, cable entry 3X 50 sqmm (primary) and 3 X 120 sqmm (secondary) cable ties, clips or trays ) (vi) Magnetic oil level gauge. (vii) Pressure release valve (PRV) with trip contacts.(viii) Conservator with oil filling hole with cap and drain plug and wit built in diaphragm to avoid direct air contact with transformer oil. (ix) Oil level indicator with minimum level marking.(x) Thermometer pockets with thermometer. (xi) Silica gel breather (xii) Air Release plug. (xiii) Lifting Lugs (xiv) Earthing terminals (xv) Bi-directional Rollers (xvi) Anodized aluminum rating and diagram plate. (xvii) Off load Tap changer including indoor remote control panel. (xviii) Top filter valve (xix) Including transformer platform as per OEM recommendation is deemed to be included in quoted rates.Following protections shall be integrated with RMU Necessary equipments/metering devices shall be instaled in transformer.(a) Instantaneous overcurrent (b) AC time over current (c) Neutral & residual instantaneous over cuurent (d) Neutral & residual time overcurrent (e) master trip (f) anti pumping (g) trip circuit supervision (h) DC failure (i) WTI and OTI (j) pressure relief (k) Buchholz (l) Differential protectionNOTE:-The following works /items shall deemed to be included in the above quoted rates and no extra payment shall be made to the contractor on this account. (i) The erection /installation of transformer with suitable size of foundation as per OEM recommendation is deemed to be included in quoted rates (ii) Rates quoted is inclusive of all control cables of suitable size and core(as per manufacturer recommendations) from buchholz relay, PRV, OTI & WTI of power transformer to various controls ie CTS/PTs & HT panel and control panels. (iii) LT single core cable /LT bus bar of suitable size and capacity from LT panel to step up transforemers LT side including appropriate size of cable lugs as required at site for connection complete all as specified and directed. (iv) The step up transformer shall be suitable for inverter input to avoid/reduce/capable for odd harmonics and heat losses. 27 Supply, installation testing and commissioning of outdoor type distribution low losses as per Level II part I (IS:1180) of 1.25 MVA, 0.415/11KV, 3 phase, 50 HZ, ONAN Cooled oil immersed copper wound out door type Step up Transformer delta/star (Δ/Υ) (complete with first oil filling and other standard fitting / accessories and Off load tap changer (Taping Range ± 5 % in step of 2.5% each) suitable for feeding supply generated from solar power plant to existing transmission line with Including the following : 28 HV bushing and LV Cable Box along with necessary bus bars with adaptor box suitable for terminating incoming cables frominverter. Marshalling Box (having TTB Only ) all as specified and directed (i) Buchholz Relay with alarm and trip contact and shut off valves. (ii) Oil temperature indicator 150 mm dia with alarm and trip contact. (iii) Winding temperature indicator with alarm and trip contacts (iv) Marshalling box 200 TB (MK) -03 Nos (v) Magnetic oil level gauge. (vi) Pressure release valve (PRV) with trip contacts. (vii) Conservator with oil filling hole with cap and drain plug and wit built in diaphragm to avoid direct air contact with transformer oil. (viii) Oil level indicator with minimum level marking. (ix) Thermometer pockets with thermometer. (x) Silica gel breather (xi) Air Release plug. (xii) Lifting Lugs (xiii) Earthing terminals (xiv) Bi-directional Rollers (xv) Anodized aluminum rating and diagram plate. (xvi) Off load Tap changer. (xvii) Top filter valve (xviii) Differential relay protection for power transformer Following protections shall be integrated with RMU Necessary equipments/metering devices shall be instaled in transformer.(a) Instantaneous overcurrent (b) AC time over current (c) Neutral & residual instantaneous over cuurent (d) Neutral & residual time overcurrent (e) master trip (f) anti pumping (g) trip circuit supervision (h) DC failure (i) WTI and OTI (j) pressure relief (k) Buchholz (l) Differential protectionNOTE:-The following works /items shall deemed to be included in the above quoted rates and no extra payment shall be made to the contractor on this account. (i) The erection /installation of transformer with suitable size of foundation as per OEM design is deemed to be included in quoted rates .(ii) Rates quoted is inclusive of all control cables of suitablesize (as per manufacturer recommendations) from different relays buchholz relay of power transformer to various controls ie CTS/PTs & HT panel and control panels. (iii) LT single core cable /LT bus bar of suitable size and capacity from LT panel to step up transforemers LT side including appropriate size of cable lugs as required at site for connection complete all as specified and directed. (iv) The transformer shall be suitable for inverter input to avoid/reduce/capable for odd harmonics and heat losses. 29 Supply, installatioon , testing and commissiooning of factory made outdoor type 4 Way 2x630 Amp SF6 + 2x630Amp LBS out door type 11 KV Ringmain Unit with Space Heater at Altitude 4200m, 630 Amps IAC 20 KA for 3 sec suitable for solar power system confirming to relevant IS/IEC, LSC 2B having following specification and comprising of following:- (i) Electrolytic copper bus bars, droppers and bus bar should be insulated with full system voltage sleeves. Each SF6 breaker shall comprise of following 30 (ii) Trolly mounted vaccum circuit breaker as per IEC-62271-100 SF6 circuit breaker should have three Nos resin encapsulated vaccum bottles.(iii) Motorized spring charging mechanism 230V AC 50 Hz with integral spring charging handle for manual spring charging. (iv) Cast resin current transformer 11KV, 200/1-1A, Core-I: class 1.0, 5VA, core2:5P10,5VA.Bushing shall be of 11 KV (v) Cast resin potential transformer 11KV/√3/110V, 50VA, class 0.5Cl 3P, bushing shall be 11KV KV and HT fuse at the primary end and 4P MCB at secondary end of PT. (vi) Accessoories like local/remote switch, breaker control switch (T-N-C) space heater with thermostat, DC and AC control circuit through MCB, indicating lamps for RYB, spring charge, DC supply healthy, breaker ON/OFF , breaker in SERVICE/TEST. (vii) Multifunction meter with RS 485 port , on MODBUS Protocol. (viii) Digital ammeter and digital voltmeter. (ix) Master trip relay-01 No and Aux relay TCS, DC Fail, OC & E/F (x) Comprehensive numarical protection relay on MODBUS protocol compatiable for directional and non directional O/C, E/F, U/V, O/V protection, Pressure switch or gas density monito, Frequency relay, Breaker failure protectionTransfomer protection Bucholz protection, PRV,Differential protection, OTI, WTI Relay and panel should have following additional facilities:- (xi) Trip Ckt supervision, AC fail, DC fail (xii) Disturbance recorder. (xiii) Event log with date and time (xiv) Measurment and control feature (xv) Fully internal arc type tested. (xvi) SF6 bottles should be epoxy encapsulated. (xvii) Racking in/out, manual closing/tripping of CB with compartment door closed. (xviii) Breaker shall be provided with following contacts:- (xix) Auxilary switch with 6 No + 6 NC mounted on the draw out portion of the switchgear. (xx) Position switch with 3 NO + 1NC contacts for eachposition in SERVICE and TEST.(xxi) 16 window annunciater with hooter/alarm for OC,SC,OV,UV,TCS,DC Fail, AC Fail OTI,WTI,PRV,Bucholz, Differential, OF, UF, Gas density low, Breaker failure protection 31 Material and Labour for Earthing complete with GI earthplate electrode 600mm x 600mm and not less than 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to GI strip of size 32x6mm by means of bolts, nuts, check nuts and washers of GI/steel all as shown in electric plate No 3 connected to equipmentscomplete and including char coal dust & salt filling in alternate layers (each layer shall be 15 cm thick)and GI protection pipe, medium grade 40mm dia and GI watering pipe 20mm, medium grade with funnel and wire mesh, 40mm thick pre-cast RCC, M-15 (nominal mix) cover reinforced with XPM weight not less than 4kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40 x 40 x 3mm frame for cover, PCC M-15 (nominal mix) pit, excavation and earth work in any type of soil and connectedcomplete all as specified and directed. 32 Material and Labour for earthing complete with and including copper earth plate electrode 600 mm x 600 mm x 3.15 mm surrounded by a mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less than 2.25 m deep below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level, connected to copper trip earth lead wire 25x6 mm dia by means of nuts, bolts, checknuts and washers made out of galvanised iron, 15 mm bore (light grade) GI pipe for protection of earthing lead, 20 mm bore (light grade) GI pipe for watering with funnel, wire mesh and including necessary excavation and earth work, PCC 1:2:4 type B-1 pit and 50 mm thick RCC M-25(Design mix) reinforced with XPM (weight not less than 3 kg/sq m) pit cover, C.I frame, charcoal and comman salt filling in alternate layers, complete all as shown and specified in electrical plate No. 3 of SI Part-I. 33 Material and Labour for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr belowground level connecting to galvanisedearth lead wire 4mm dia by means of bolts,check nuts and washers and earth lead protected by provision of GI pipe light grade 15mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/Sqm) and frame of angle iron 25 X 25 X 3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, connecting to test pointwith fixing arrangement, funnel, wire mesh and earth work in hard/dense soil,returning filling in and removal of surplus soil to a distance not exeeding 50 mtr, all as per electrical plate No 3all as specified and testing on completion. Note :- Cost of earth lead upto 7.5 mtr and GI 15mm bore pipe is deemed to be included in unit rate. 34 Supply, installation, testing and commissioning of factory made, DG disribution cum DG syncronization panel of suitable size, outdoor type made out of CRCA sheet 3.15 mm thick with partition of 1.6 mm, frame factory fabricated with front and back openable double door with locking arrangement, with MS angle section 50x50x6 mm support, duly powder coated painting having thickness not less than 100 microns provided suitable gasket to make it dust and vermin proof, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system,comprising of following :- (a)Distribution panel with ACB 2500Amp microprocessor release operation type, 415 Volt 50 KA 1 Nos 2500 Amp ACB (b) DG Synchronizing panel- DG Sync Panel with double busbars required for sync 3 nos 400 KVA DG set after Sync Power fed to 2500 Amp Distribution Panel (c)Control Ckt require for DG Sync With PV System, Logic of this control ckt : DG 1, 400 KVA on all time with minimum 30% load and when load increase 80% DG2 400 KVAstart and so on for all 3rd Nos 400 KVA DG) Note: DG syncronization panel shall be provided as per approved SLDcomplete all as specified and directed.. 35 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1.9/3.3 KVgrade, cross-sectional area 400 Sqmm 3 core for solar ACB panel to inverter duty transformercomplete all as specified and directed. 36 Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrinkable type joint complete with jointing meterial and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size400 Sqmmcomplete all as specified and directed. 37 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 400 Sqmm 3.5 corecomplete all as specified and directed. 38 Material and Labourfor Sand cushing to under ground cable, provided with 8 cms thick layer before laying the cable and 15 cm thick after laying and streching the calbe complete all as specified and directed. 39 Supply and laying unreinforced precast concrete cable cover on the cable in the trench,classl LV, Type-I, flat size 250mm X150mmX50mm(1100 volts LT cable)complete all as specified and directed. 40 Supply and laying Unreinforced precastconcrete cable coveron the cable in the trench , class HV, Type-I, flat size 300mm X180mmX50mm (for 11KV HT cable)complete all as specified and directed. 41 Material and Labour for Solar HT Generation meter AC three phase, multifunction net meter of accuracy class 0.5s, rated voltage 110 V Ph-Ph or 3 X 63.5 V Ph-N, voltage range + 15% to - 30% of rated voltage, basic current 1 Amps or 5 Amps, maximum continuous current 2 times (200%) of basic current , starting current 0.1% of basic current, frequency 50 Hz and operating frequency range 47.5 to 50.5 Hz , IP 65 protection, Protection: over voltage, over current, over/ under grid frequency, over temperature, short circuit. with optical & RS232 port, backlit LCD display, (measures import kWh, kVAh, Export kWh, kVAh , Net kWh, kVAh, V,I, kW, 6 month history of energy, load survey, tamper detection & logging, power On/Off events, instantaneous parameters of rating -/5A with display in absence of powercomplete all as specified and directed. 42 Shifting of DG set of capacity 3 x 400 KVA from location Upper and lower chumathang (Upto 2 Km) near to SPV plant location with all connected items including installation, connection with cable, making of suitable size as per existing 3 Nos PCC plateform of 400 KVA DG set all as per specified and directed 43 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 630 Sqmm 3.5 corecomplete all as specified and directed. 44 Material and Labour for Rolling and consolidation formation surface in cuttingto required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed. 45 Material and Labour for soiling (or Sub Base) 200mm thick (Spread thickness) with broken boulders or quarred stone interstices filled, surface formed and surface formed and rolled and consolidated torequired gradient and camber with 8 to 12 tonne power roller, complete all as specified and directed. 46 Material and Labour for cement concrete work in pavement/hardstanding of flexural strength 40 kg/sqcm in field using 400 kg of cement per Cum for thickness of concrete 20 cm including brooming the surface complete all as specified and directed. 47 Material and Labour for forming contraction (Dummy) joints 80mm deepx 10mm wide filled with sealing compound grade B complete all as specified and directed. 48 Material and Labour for forming 20mm thick expansiion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade B for 200mm thickness of concrete slab complete all as specified and directed. 49 Material and Labour for 150mm thick (compacted thickness) WMM in two equal layers 75mm thick each layer with coarse aggregates of lime stone, sand stone flint or quartizite of grading 2 (63 to 40mm size) spread, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed. 50 Material and Labour for Cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation filling and mass concretecomplete all as specified and directed. 51 Material and Labour for Cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in benching, coping around poles (aove GL) etc including weathering slightly rounded or chamfered angles and fair finshing the exposed surfaces or concrete using extra cement cmplete including necessary form workcomplete all as specified and directed. 52 Supplying, installation, commissioning and testing of transformer step down 11/0.415KV capacity750 KVA, Level II, IS 1180 Part I, out door type copper wound 3 phase, 4 wire, 50 cycles per second, oil immersed naturally cooled external cooling tube core type delta connection on primary side (HV side) and star connection on secondary side (LV side) having tapping 0,± 2.5%, ±5%, ±7.5% to be charged by means of hand operated, off load/tap changing gear including first filling of new transformer oil of dielectric strength not less than 60 KV with standard fittings such as two earting terminals for body and one additional for neutral brought out inbushing, oil level gauge indicator for level minimum and maximum, lifting lugs, rating and termina plate, plain breather device to prevent ingress of rain water and inserts, drain cum sampling valve 20mm bore steel with plug,dial type thermo meter, oil filling hole 32mm threaded with plug. The transformer shall be powder coated for water/dust and vermin proof. Note :- (1) Transformer oil shall be conforming to requirements of IS-335-1983 specification for newinsulating oil for transformers.(2) Equipment shall be suitable to operate at 4200 mtr above MSL at temperature variation between -35˚C to (+)35˚ C including platform as per OEM recommendation is deemed to be included in quoted rates (For lower Chumathang) 53 Supplying, installation, commissioning and testing of transformer step down 11/0.415KV capacity400 KVA,Level II, IS 1180 Part I, out door type copper wound 3 phase, 4 wire, 50 cycles per second, oil immersed naturally cooled external cooling tube core type delta connection on primary side (HV side) and star connection on secondary side (LV side) having tapping 0,± 2.5%, ±5%, ±7.5% to be charged by means of hand operated, off load/tap changing gear including first filling of new transformer oil of dielectric strength not less than 60 KV with standard fittings such as two earting terminals for body and one additional for neutral brought out inbushing, oil level gauge indicator for level minimum and maximum, lifting lugs, rating and termina plate, plain breather device to prevent ingress of rain water and inserts, drain cum sampling valve 20mm bore steel with plug,dial type thermo meter, oil filling hole 32mm threaded with plug. The transformer shall be powder coated for water/dust and vermin proof. Note :- (1) Transformer oil shall be conforming to requirements of IS-335-1983 specification for newinsulating oil for transformers.(2) Equipment shall be suitable to operate at 4200 mtr above MSL at temperature variation between -35˚C to (+)35˚ Cincluding platform as per OEM recommendationis deemed to be included in quoted rates (For additional pocket & Upper chumathang)complete all as specified and directed. 54 Material and Labour for Steel tublar swaged poles erected truly vertical or planted as strut complete with 6 mm thick mild steel base plate, welded to pole, B-118 final taper cap,bolts,nuts & screws, poles made out of ERW MS tubing conforming to IS 2713 Part-II. Type 410-SP-55 (11 m long) including drilling of holes of required size for fixing of cross arms, paintin g the exposed surfacs of pole with two coats of aluminium paint over a coat of two coats of zinc chrome3 primer and two coats of black bitumenous paint internally & portion embadded in concrete, making five black & white bands at lower portion of pole each 300 mm wide alternatley, and marking pole No. with black paint at suitable height complete all as specified and directed.(For two/ four pole structure) Note :- Excavation and earth work, PCC in foundation shall be measured and paid for separetely.complete all as specified and directed. 55 Material and Labour for Switch air break gang opertated tripple pole mechanically operated from ground level mounted, outdoor type suitable for vertical instatllation single break provided with locking arrangement for operating handle with lock consisting of mild steel channelHT post top insulator copper alloy high pressure assembly 33 KV grade complete with all accessoriescomplete all as specified and directed. 56 Supply & fixing lightning arrestor, high tension, polymer type gapless complete with all fitting transmission class, of capacity 33 kilo voltscomplete all as specified and directed. 57 Material and Labour forCross arms, bracing , supports, clamps and aback plates ,fabricated out of structural steel sections incuding nuts, bolts,washers,welding,bending cold or hot, drilling holes for bolts in any shape or size as indicated or coat of red oxide zinx chrome primer, one under coat and one finshing coat of aluminium paint complete all as specified. 58 Supply, laying, testing and commissioning of aluminium conductor, XLPE insulated, PVC inner sheathed, GI strip or wire armoured & overall PVC sheathed cable of 11 KV (Earthed) grade in trenchesl/ in GI pipe including dressing and clamping the cable with MS clamps of cross section area 185 Sqmm 3 corecomplete all as specified and directed. 59 Supply, laying, testing and commissioning of aluminium conductor, XLPE insulated, PVC inner sheathed, GI strip or wire armoured & overall PVC sheathed cable of 11 KV (Earthed) grade in trenchesl/ in GI pipe including dressing and clamping the cable with MS clamps of cross section area 120 Sqmm 3 corecomplete all as specified and directed. 60 Supply and fixing of cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrinkable type joint complete with jointing meterial and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size120 sqmm to 185 sqmmcompleted all as specified and directed. 61 Material and Labour for ACSR conductor for the provision of HT OH lineof sizes,3 of 6/1X3.0 (Ferret), 3 of 6/ 1x2.59 ( weasel) completed all as specified and directed. 62 Material and Labour for galvanised steel wire of4 mm dia with hooks stretching kinks and bends completed all as specified and directed. 63 Anticlimbing devices spikes type fabricated out of MS bars (round square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and shown on drawings. 64 Supply and fixing pin type 10 KN polymer type, porcelain, viterous white, brown or green insulator including one mild steel spindle,for 33000 volts grade incl all accessories for fixing of pin insulator completed all as specified and directed. 65 Supply and fixing disc type 90 KN polymer type, porcelain, viterous white, brown or green insulator including one mild steel spindle,for 33000 volts grade incl all accessories for fixing of disc insulator completed all as specified and directed. 66 Supply and fixing of Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letter, figures and conventional skull and bones in signal red colour and fixed with M.S clamps, bolts and nuts of approved size, for HT,25x20cm sizecomplete all as specified and directed. 67 Material and Labour for Galvanised steel tubing light grade 80 mm bore laid in trenches orfix to wall/hole with fitting as required for cable protectioncomplete all as specified and directed. 68 Material and Labour for Galvanised steel tubing light grade 100 mm bore laid in trenches orfix to wall/hole with fitting as required for cable protectioncomplete all as specified and directed. 69 Material and Labour for stay assembly complete using stay rod of 20 mm dia complete with accessories as shown in electric plate no 1 of SSR-2009 Part -I complete all as specified and directed by Engr-in-Charge Note: (Unit rate quoted by contractor herein before also includes earth work and PCC work ,Loop type insulator ,stay clamps ,nuts ,bolts ,washers and concretecomplete all as specified and directed. 70 Material and Labour for galvanised stay strand, size 7/4 mmcomplete all as specified and directed. 71 Supply and fixing of loop type porcelain vitreous white ,brown or green insulator large size with overall dimensions 90x140 mm,clearance of hole 25.5 mm complete all as specified and directed 72 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 2200 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. 73 Under composion of following.(LT panel No-01 Lower Chumathag)(i)ACB 415 V, 4 pole, 1600 Amp, 50 KA -01 No (Incoming)(ii) ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Outgoing)For existing DG panel (iii) ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Outgoing)For existing DG panel(iv) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 2500 Amps duly moounted on porcelain insulators -01 Set (v) Digital amp meter 3 ph programmeable type with suitable2500 Amps -01 Set (vi)Digital volt meter 3 ph programmeable type with suitable0- 500 volts -01 Set (vii) LED phase indicator (RYB )-01 Set 74 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and copper busbar of capacity not less than 1250 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. 75 Under composion of following. (LT Panel No-2 upper chumathang)(i)ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Incoming cum outgoing) (ii) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 1200 Amps duly moounted on porcelain insulators -01 Set(iv) Digital amp meter 3 ph programmeable type with suitable 800 Amps -01 Set(v)Digital volt meter 3 ph programmeable type with suitable 0-500 volts -01 Set (vi) LED phase indicator (RYB )-01 Set 76 Supply and install LT panel outdoor type weather & vermin proofsuitable for 3 phase 415 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and copper busbar of capacity not less than 1250 Amp insulated with PVC sleeves and coloured with (R,Y,B and Black) with angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. Under composion of following. (LT Panel No-3 upper chumathang additional pocket) 77 (i)ACB 415 V, 4 pole, 800 Amp, 50 KA -01 No (Incoming)(ii) MCCB 415 V, 4 pole, 200 Amp, 25 KA -1 No (Out Going), MCCB 415 V, 4 pole, 400 Amp, 36 KA -1 No (Out Going) MCCB 415 V, 4 pole, 100 Amp, 25 KA -1 No (Out Going)(iii) Bus bar chamber with and including aluminium strip (set 4 Nos) suitable for 1250 Amps duly moounted on porcelain insulators -01 Set (iv) Digital amp meter 3 ph programmeable type with suitable 800 Amps -01 Set (v)Digital volt meter 3 ph programmeable type with suitable 0-500 volts -01 Set (vi) LED phase indicator (RYB )-01 Set 78 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 Sqmm 3.5 core complete all as specified anddirected 79 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 Sqmm 3.5 core complete all as specified anddirected 80 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 Sqmm 3.5 core complete all as specified anddirected 81 Supply, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 core complete all as specified anddirected 82 Supply and fixing of LED Street light of 70 Watt , IP66 power coated pressure die cast aluminium housing with high efficiency LED as lighting source and toughened glass complete all as specified anddirected 83 Supply and install LT panel box outdoor type weather & vermin proofsuitable for single phase 230 V made out of 3.15 mm thick MS sheet duly powder coatedand both sides openable with lockingarrangment and aluminium busbar of capacity not less than 100 Amp insulated with phase indicator incl angle iron frame for stand made out of40 x 40 x 6mmincludingfour legs grouted by using PCC (1:2:4) type B 1 with 20mm graded stone aggregate thimbling andcable entry box incl connection and necessary fixing arrangement complete all as specified anddirected by Engineer in Charge. Under composion of following.(For Street light)(i) MCB SPN 6-32 Amps, 230V, 10 KA -01 No (Incoming)(ii) MCB SP 6-10 Amps, 230V, 10 KA -02 No (outcoming)(iii) Bus bar chamber with and including aluminium strip ( 2 Nos) suitable for 100 Amps duly moounted on porcelain insulators -01 Set (iv) LED phase indicator (RYB )-01 Set 84 Supply and fixing GI bracket 1.2 m long made out of GI pipe 40mm dia mediam grade with necessary clamp for fixing nut and bolts and connection complete all as specified anddirected 85 Material and Labour for Steel tublar swaged poles erected truly vertical or planted as strut complete with 6 mm thick mild steel base plate, welded to pole, B-118 final taper cap,bolts,nuts & screws, poles made out of ERW MS tubing conforming to IS 2713 Part-II. Type 410-SP-31 (09 m long) including drilling of holes of required size for fixing of cross arms, paintin g the exposed surfacs of pole with two coats of aluminium paint over a coat of two coats of zinc chrome3 primer and two coats of black bitumenous paint internally & portion embadded in concrete, making five black & white bands at lower portion of pole each 300 mm wide alternatley, and marking pole No. with black paint at suitable height complete all as specified and directed.Note :- Excavation and earth work, PCC in foundation shall be measured and paid for separetely. 86 Supply and fixing of 2.5 sqmm copper conductor cable for street light connection from junction box to street light at pole all as specified and directed by Engr-in-charge 87 Supply and fixing of junction box made out of PVC box with necessary clamps for fixing busbar with MCB SP 6 Amps and necessary connection from street light to junction box with 2.5 sqmm x 3C copper conductor cable complete all as specified anddirected 88 Material and Labour for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and haunching completely surrounding pipes with concrete after they laid and tested for 150 mm bore NP 2 pipe, complete all as specified and directed. 89 Material and Labour forM&L for Reinforced concrete pipes,class NP2,dia 150 mmlaid and jointed complete with collars complete all as specified and directed. 90 Material and Labour for PCC 1:2:4 Type B1 using 20 mm garded stone agg as in coping including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. 91 Supply onlyliquid water proofing compoundcomplete all as specified and directed. 92 Material and Labour forTMT bars 10mm dia and over , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia, or securing with clips, rungs, handles completeall as specified and directed. 93 Material and Labour forprecast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in manhole coverslabsincluding necessary formworks set in cement mortar 1:4 complete all as specified and directed. 94 Material and Labour for cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channel and inside drains of manhole complete all as specified and directed. 95 Material and Labour for Mild steel rungs and handle made to shape out of 16mm dia round barsconforming to Fe-290grade E-165including fixing/embedding in concrete /masonrypainted with two coats of bituminous paint complete all as specified and directed. 96 Extra forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed. 97 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work not exc 200mm thick (horizontal or sloping) for flat fair finished surfaces complete all as specified and directed. 98 Material and Labour for construction of septic tank for 10 users designed to carry sewage and sewage water, excavation in any type of soil, PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregates in foundation, precast cement concrete block masonry wall, RCC cover slab complete all as specified and directed and shown on drawing. 99 Material and Labour for construction of soakage well with excavation in any type of soil complete all as specifiedand directed and shown on drawing. 100 Material and Labour for MS work as in posts and struts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 101 Supply only chain link MS galvanised fencing any size or type complete all as specified anddirectedNote : weight of chain link fencing shall be checked by BOO detailed by GE. 102 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails straining bolts etc including provision of binding wire complete all as specified and directed. 103 Material and Labour for prepration of new or previously untreated steel surface & priming with red oxide primer and applying two coats of synthetic enamel paint of any description over 10cm width or girth not otherwise described complete all as specified and directed. 104 Material and Labour for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 105 Material and Labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 22.5cm longand diameter of neck 11 to 15mm complete all as specified and directed. 106 Material and Labour for construction of steel gate 5.5m wide and 3m high with RCC pillars including excavation and earth work and all other relevant works complete all as specified and directed. 107 Excavation over area not exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed. 108 Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out inhard/dense soil. Complete all specifed and directed. 109 All as per Srl No. 94. above but exc 1.5 m or part there ofin depth beyond the first 1.5m complete all as specified anddirected 110 Excavation in post holes (or similar holes) each not exc 0.5 Cum getting out returning filling and ramming earth or broken rubble mixed with earth around in layers not exc 25cm watering and removing surplus soil to a distance not exc 50 and making good surface in hard/dense soil complete all as specified and directed. 111 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed . 112 Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. 113 Removing excavated rocks material from site n exc. 50 m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified anddirected
Contract Date: Jun 20, 2026 Contract Value : ₹ 6.14 Crore
Statutory Bodies & Commissions/Committees No of Bidders 9
Ladakh View Result →
5.
Power #11055259 AOC
Tender Document For Sub-Station and Transmission Line [PACKAGE-C8(1B)]-TECHNICALSPECIFICATION FOR 12kV, 800A, 18.4kA, MULTI PANEL (Incoming, Bus Coupler with Adaptor Panel and Outgoing) SHUNT TRIP, INDOOR TYPE SCADA COMPATIBLE SWITCHGEAR WITH MOTOR OPERATED SPRING CLOSING VACUUM CIRCUIT BREAKER- 1 ELECTRICAL PART : 2 WBSETCL Assessed Quantities: 3 245KV 40KA for 3sec Gas Insulated Switchgear - i)2500 A rated Double Bus Barwith BUS earthing arrangement ii) 3 phase / single phase encapsulated iii) Minimum 2000 A rated Circuit Breaker for line and Transformers & 2500A for Bus coupler Bay iv) CT with current ratio 1600-800-400/1A (5 core) for feeder & transformer & 2000-1600/1A (3 core) for bus coupler as per CT specification v) Each feeder comprises of Circuit Breaker, Disconnectors, CTs, Bus bar, density monitors, gas partition etc. vi) suitable for EHV cable entry withdouble terminationarrangementif single Run cable is used other will be kept as spare. vii) Standalone Local Control Cubicle (LCC) with all required accessoriesand Gas monitoring system and the requiredPD sensors to cover the total GIS portion. -The complete system shall be as per technical specification and requirement comprising of - 4 Complete LineBayswith accommodation of3 nos GIS Line VTeach having 3 cores(2 nos core for Protection and 1 no core for metering and other parameters as per technical specification 5 LA for Line bay ( one number per phase - to be installed within GIS) 6 CompleteTransformer Bays 7 Buscoupler Bay 8 2 sets of 3 phase Bus PT each having 3 cores (2 core Protection and 1 core Metering), each for Main Bus-I & Main Bus-II with disconnectors & earth switch. As per Tech Spec 9 Disconnector with earthing arrangement and gas tight barriers atOne side of Main Bus I & IIfor future extension.one side 10 Portable UHF PD monitoring System - The analyser shall have 6 channel input withinherent PD location accuracy of 0.5m., colour display unit and user friendly interface for detailed analysis.The system includes allaccessoriesto monitorPD, UHF cables,required software and other accessories to complete as per Technical Specification. 11 Dew Point Meter as per Technical Specification 12 145KV 31.5KA for 3sec Gas Insulated Switchgear i)2000 A rated Double Bus Barwith BUS earthing arrangement ii) 3 phase / single phase encapsulated iii) Minimum 2000 A rated Circuit Breaker iv) Each feeder comprises of Circuit Breaker, Disconnectors, CTs, Bus bar, density monitors, gas partition etc.v) CT with current ratio 1000-800-400/1A (5 core) for feeder & transformer & 2000-1600/1A (3 core) for bus coupler as per CT specification vi) suitable for EHV cable entry withdouble terminationarrangementif single Run cable is used other will be kept as spare. vii) Standalone Local Control Cubicle (LCC) with all required accessoriesand Gas monitoring system and the requiredPD sensors to cover the total GIS portion. -The complete system shall be as per technical specification and requirement comprising of - 13 Complete LineBayswith accommodation of3 nos GIS Line VTeach having 3 cores(2 nos core for Protection and 1 no core for metering and other parameters as per technical specification 14 Complete Transformer Bays for LV side of 160 MVA 220/132 KV Transformer & HV side of 50 MVA 132/33 KV Transformers 15 Bus coupler Bay 16 Disconnector with earthing arrangement and gas tight barriers atOne side of Main Bus I & IIfor future extension.one side 17 2 sets of 3 phase Bus PT each having 3 cores (2 core Protection and 1 core Metering), each for Main Bus-I & Main Bus-II with disconnectors & earth switch. As per Tech Spec 18 36 KV, 31.5KA for 3sec Indoor, floor mounted drawoutSwitchgear Assembly (2500A Bus rating with Copper Bus Bar) with VCB suitable for EHV cable entry withtripple termination arrangement and bus earthing arrangement from both side, Line earthing arrangement and dead line status and corresponding electrical and mechanicalinterlocking arrangementas per technical specification and requirement comprising of - 19 Outgoing Feeder Bays, 1250A Circuit Breaker ratingas per Techspec. 20 LV side of50MVA 132/33KV Transformer Bays (2000 A Breaker Capacity) CT Ratio 2000-1000/1A 3 coreas per Tech spec 21 HV side of6.3 MVA 33/11KV Transformer Bays(1250 A Breaker Capacity ) as per Tech Spec 22 Station service transformer bay (1250A Circuit Breaker rating) 23 Bus section Bay (2500 A Breaker Capacity) 24 (i)2(two) set of 3 phase Bus PT - 5 limb, (One set each for Main Bus-I & Main Bus-II) with isolation arrangement.as per Tech Spec. (ii) Other required equipment & accessories like Bus Earthing arrangement etc. to complete the system . 25 12 KV, 1600 A, 25 KA, 30 V DC, SCADA compatible, VCB Switchgear includingProtection Relays, ,control & annunciation equipment and other accessories complete as per technical specification (uploaded for Nandanpuronly) Cable and bus earthing shall be electrically and mechanically interlocked with associated breaker as per interlock requirement. but rating should be as per BOQrequirement comprising of - 26 Outgoing Line Bays (CT Ratio 400-200/1) 2 coreVCB rating 1250A 27 Incoming Transformer Bays(CT Ratio 600-400/1A) 4 core VCB rating 1250A 28 Bus section Bay VCB rating 1600A 29 (i) 3(Three) set of 3 phase Bus PTwith isolation arrangement must be mounted above incomer switchgearpanel. (ii) Other required equipment and accessories like Bus earthing arrangement etc to complete the system 30 Electric Overhead Travelling Crane (E.O.T.) 31 Electric Overhead Travelling Crane (E.O.T.)- For 220 KV GIS Building 5.0 Metric Ton capacity or maximum weight of GIS shipping unit whichever is higher -complete with all accessories as per technical specification and requirement. 32 Transformers : 33 160 MVA, 220/132/33 KV, 3 Phase ,Auto Transformer suitablefor NIFPSwith Bushing CTs and NCTS andRTCC panel alonwith BCUand other accessories as per technical specification ofAuto Transformer. 220KV & 132KV bushingshall be of RIP/RIS type. 34 Nitrogen injection type Fire Prevention and ExtinguishingSystem including reservoir tank andall required accessories for 160 MVA, 220/132/33 KV, 3 Phase Power Transformer 35 50 MVA, 132/33 KV, 3 Phase, 2 winding Power Transformerwith Bushing CTs and NCTsincluding RTCC panel alongwith BCU and alongwith all accessoriesin line with technical specification of Power Transformer.132 KVbushingshall be of RIP/RIS type. 36 6.3 MVA, 33/11 KV, 3 Phase, 2 winding Power Transformer with Bushing CTs and NCTs in line with technical specification of Power Transformer . As per Tech spec 37 STATION SERVICE TRANSFORMER: 315 KVA, 33/0.415 KV, 3Ph, 2-Windingas per technical specification andrequirement 38 EARTHINGTRANSFORMER: 33KV, 3 Ph ,fault current rating of874 Amp for 30 secas per Technical Specification and requirement 39 Isolators : As per Technical specification 40 220 KV, 1600A, 40 KA for 3sec, HCB, motor operated 3-phase Assembly WITHOUT EARTHING SWITCH (excluding insulators) for HV side of 160 MVA Transformers(water proof mechanism housing with auxiliary switch) 41 Solid Core Insulator for each set of above Isolators 42 220 KV, 1600A, 40 KA for 3sec, HCB, motor operated 3-phase Assembly WITH EARTHING SWITCH (excluding insulators) for Line bay(water proof mechanism housing with auxiliary switch) 43 Solid Core Insulator for each set of above Isolators 44 132KV, 1250 A,31.5 KA for 3sec, HCB, 3Ph Assembly isolator with Earth Switch for line feeder, motor control - excluding solid core insulators as per Tech. Specification (water proof mechanism housing with auxiliary switch) 45 Solid coreInsulator for each set of above Isolators 46 132KV, 1250A,31.5 KA for 3sec, HCB, 3Ph Assembly isolator with out Earth Switch for Transformers, motor control - excluding solid core insulators as per Tech. Specification (water proof mechanism housing with auxiliary switch) 47 Solid coreInsulator for each set of above Isolators 48 33KV, 1250A,31.5 KA for 3sec, CRDB, 3Ph Assemblywithout earthswitch as per Tech. Specification - forHV side of 33/11KV Transformer & Earthing Transformer(excludingInsulators ) 49 Solid coreInsulator for each set of above Isolators 50 33KV, 2000 A,31.5 KA for 3sec, CRDB, 3Ph Assemblywithout earthswitch as per Tech. Specification - for LV side of 132/33 KV Transformer,(excludingInsulators ) 51 Solid coreInsulator for each set of above Isolators 52 33KV, 1250A,31.5 KA for 3sec, CRDB, 3Ph Assembly with Horn-gap fuse units to be mounted on same structure of isolator ( for Station service Transformers ) as per Tech. Specification(excluding insulator) 53 Solid Core Insulator for each set of above Isolators 54 LIGHTNINGARRESTORAs per Technical specification 55 198 KV, single phase, 10 KA, Heavy Duty, Station Class, Gapless (for 2 nos. 160 MVA Transformersas per technical specification and as per requirement. (Polymer type) 56 198 KV class polymer type LA at Composite Tower 57 120 KV, Single phase, 10 KA, Heavy Duty, Station Class, Gapless for 2 nos 160MVA Transformers,2 nos 50MVA Transformerand line bays (Polymer type) 58 42 KV, Single phase, 10 KA, Heavy Duty, Station Class, Gapless (for 2 nos 50MVA transformer, 3 Nos 6.3 MVA 33/11 KV Transformer &2 nos.315KVA station serviceTransformer) ((Polymer type) 59 12 KV, 3 phase 10KA,Station class GapelessLA (LV side of 3nos. 6.3MVA Transformers) (Polymer type) 60 220 V Battery & Charger( As per technical Specification ) 61 VRLA Battery SET - 800AH 220 Voltas per Tech Spec. 62 Battery Health monitoring system forabovementioned 220V batteries as per Technical Specification. 63 Battery Charger - 220Volt. suitable for above Battery set in line with Technical Specification(Float Charger capacity - 80A and Float cum Boost Charger capacity - 150A) - Charger shall be equipped with disconnecting arrangement forLoad and Battery - Charger shall be capable of charging the battery both in Constant Current and Constant Voltage mode with appropriate selector switch - Fuse fail indication arrangements are to be provided for all fuse units. All the indications like fuse fail, blocking diode fail, rect. fail, battery earth fault, charger fail etc are to be provided locally, as well as necessary potential free contacts to send at remote end also. 64 VRLA BATTERY SET -75 AH 30 VoltCapacity will be as per design or75 AH whichever is higher as per uploadedtech spec 65 Battery Charger - 30Volt. Foalt cum Boost Charger Float charger capacity 35A or as per design whichever is higher as per Tech Spec ( uploaded) - Charger shall be equipped with disconnecting arrangement forLoad and Battery - Charger shall be capable of charging the battery both in Constant Current and Constant Voltage mode with appropriate selector switch - Fuse fail indication arrangements are to be provided for all fuse units. All the indications like fuse fail, blocking diode fail, rect. fail, battery earth fault, charger fail etc are to be provided locally, as well as necessary potential free contacts to send at remote end also.(as per uploaded spec.) as per uploaded spec 66 PROTECTION PANEL ( SIMPLEX REAR Open Door type ) inclusive of all relays, Annunciator (Minimum 24 windows or more as per scheme requirement, with RS485 port for Modbus Communication, Auxiliary AC and DC Supply as well as Dedicated AC Fail and DC Fail windows) at each panel and other accessories as per specificaction and requirement. (Protection Panels will be installed in Relay Room.) 67 Protection panel with BCU and Breaker Control Switch for 220 KV Line Feeder. Each feeder panel will have 2 nos. Distance Protection Relays of different manufacturer having different model, algorithm, hardware with Group Selection Switch and all other accessories complete as per Tech. Spec. 68 Protection Panel with BCU and Breaker Control Switch for 220 KV side of 220/132/33 KV Transformer complete as per Tech. Spec. (Transformer Differential Relay, Circulating Curent Protection Relay in addition to all other Transformer HV Protection relays are to be considered in HV side Panel). 69 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both Bus PTs) and Breaker Control Switch for 220 KV Bus Coupler complete as per Tech. Spec. 70 220 KV Busbar Differential Panel with low impedance type Centralized Busbar Protection Relay having in-built LBB protection, End Fault protection, CT Open detection feature etc. complete as per Tech. Spec. (Panel to be complete with all relays, components and wiring i.r.o. at least 3 nos. future Line bays and 1 no. future Transformer HV bay in addition to present bays) 71 Protection panel with BCU and Breaker Control Switch for 132 KV Line Feeder. Each feeder panel will have 2 nos. Distance Protection Relays of different manufacturer having different model, algorithm, hardware with Group Selection Switch and all other accessories complete as per Tech. Spec. 72 Protection Panel with BCU and Breaker Control Switch for 132 KV side of 220/132/33 KV Transformer complete as per Tech. Spec. 73 Protection Panel with BCU and Breaker Control Switch for 132 KV side of 132/33 KV Transformer complete as per Tech. Spec. (Transformer Differential Relay, HV REF Protection Relay in addition to other Transformer HV Protection relays are to be considered in HV side Panel) 74 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both Bus PTs) and Breaker Control Switch for 132 KV Bus Coupler complete as per Tech. Spec. 75 132 KV Busbar Differential Panel with low impedance type Centralized Busbar Protection Relay having in-built LBB protection, End Fault protection, CT Open Detection feature etc. complete as per Tech. Spec. (Panel to be complete with all relays, components and wiring i.r.o. at least 3 nos. future Line bays and 1 no. future Transformer HV bay in addition to present bays) 76 Protection Panel with BCU and Breaker Control Switch for 33 KV Line Feeder as per Tech. Spec. 77 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 33/0.415 KV Station Service Transformer (S.S.T.) as per Tech. Spec. Panel schematics will be similar to Line Feeder Panel, along with addtitional S.S.T. Supervision Relays. 78 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 132/33 KV Transformer as per Tech. Spec. 79 Protection Panel with BCU and Breaker Control Switch for 33 KV side of 33/11 KV Transformer (considering HV REF Protection Relay, HV Over-current Relay and all other accessories alongwith space and provision for future Transformer Differential Relay) as per Tech. Spec. and actual requirement. 80 Protection Panel with BCU (having 2 set voltage coils for measuring 3-phase bus voltages from both side Bus PTs) and Breaker Control Switch for 33 KV Bus Section bay as per Tech. Spec. 81 Meter Panel without meter( As per drawing uploaded) 82 XLPE Copper Cableas per Technical Specification 83 220 KV 630 Sq. mm single Core Copper Cable AL sheath forLine from Composite Tower To GIS- Single phase connection with double run cable for each phase- The actual length will be decided after finalisation of LUP drawing. 84 220 KV 630 Sq. mm single Core Copper Cable AL Sheath for HV side of 160 MVA TransformersSingle phase connection with single run cable for each phase- The actual length will be decided after finalisation of LUP drawing. 85 220 KV 400 Sq. mm Single Core Cu cable AL sheath(as per technical specification and as per requirement) forLine bays- Single phase connection with single run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 86 132 KV 630 Sq. mmsingle core Cu cable AL sheath (as per technical specification and as per requirement) for connection of 132 KV side of 2 nos 160 MVA, 220/132/33 KV Transformers - Single phase connection with doublerun cable for each phase - The actual length will be decided after finalisation of LUP drawing. 87 132 KV 400 Sq. mm Single Core Cu cable AL sheath(as per technical specification and as per requirement) for connection of 132 KV side of 2 nos 50MVA, 132/33 KV Transformers and Line bays- Single phase connection with single run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 88 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer - Single phase connection with double run cable for each phase - The actual length will be decided after finalisation of LUP drawing. 89 33 KV 240 Sq.mmThree Core copper cable for three 33/11KV 6.3MVA Transformer , two 315KVA Transformer - Three Phase Connection with single run cable - The actual length will be decided after finalisation of LUP drawing. 90 11 KV 400 Sq.mm 3 coreCopper for 33/11KV 6.3MVA Transformer - Three Phase Connection with singlerun cable - The actual length will be decided after finalisation of LUP drawing. 91 Outdoor End Termination Kit/ cable sealing end and other required accessories for above XLPE cables as per requirement and specification : 92 For 220KV 630 Sq.mmsingle core copper cable for Line 93 For 220KV 630 Sq.mmsingle core copper cable forTransformer 94 For 220KV 400 Sq.mmsingle core copper cable for Line 95 132 KV 630 Sq.mm single Core Copper Cable for LV side of 160 MVA Transformer (single phase connection with doublerun cable for each phase ) 96 132 KV 400 Sq.mm single Core Copper Cable forHV side of 50 MVA Transformer & Line feeder(single phase connection with single run cable for each phase ) 97 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer (single phase connection with two run cable for each phase) 98 33 KV 240 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer, two 315 KVA Auxiliary Transformer,( Three phase connection with single run cable ) 99 11 KV 400 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer(Three Phase Connection Single run cable) 100 Indoor End Termination Kit for above XLPEcable : Dry Plug-In type GIS Indoor Termination kitwith all its accessories complete. This includes cable connecting contact plates and cable terminal box at GIS termination of type-A, Fig -3 as per IEC 60859 with support structure and insulator as per approved drawing, technical specification /requirement as per the following cables. For 33 : Dry Heat Shrink type as per approved drawing, technical specification /requirement as per the following cables. 101 For 220KV 630 Sq.mmsingle core copper cable for Line 102 For 220KV 630 Sq.mmsingle core copper cable forTransformer 103 For 220KV 400 Sq.mmsingle core copper cable for Line 104 132 KV 630 Sq.mm single Core Copper Cable for LV side of 160 MVA Transformer (single phase connection with doublerun cable for each phase ) 105 132 KV 400 Sq.mm single Core Copper Cable forHV side of 50 MVA Transformer & Line feeder(single phase connection with single run cable for each phase ) 106 33 KV 630 Sq.mmSingle Corecopper cable for LV side of 50MVA Transformer (single phase connection with two run cable for each phase) 107 33 KV 240 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer, two 315 KVA Auxiliary Transformer,( Three phase connection with single run cable ) 108 11 KV 400 Sq.mm size Three Core for three 6.3MVA 33/11KV Transformer(Three Phase Connection Single run cable) 109 Generator 110 DG set 100KVA with all accessoriesas per Technical specification 111 Communication Equipment (As per technical specification, BOQ and mentioned Annexure) 112 Fibre Optic Terminal equipment ( with minimum five redundantdirections with MSP protection)/Optical Line Terminal Equipment (SDH-STM 4) for the Sub Station Reduntant Power Supply card and Control card etc. complete to meet Tech. Spec. Requirement in all respect ( should be compatible with FO equipment at BAPL,SLDC & Backup SLDC for data and voice communication and carrier aided protection). 113 E1 Interface cards( Minimum 16 interfaces/card) 114 Ethernet Interfaces10/100 Mbps with Layer-2 switching ( Minimum 8 interfaces/card) 115 Equipment Cabinets 116 Main Distribution Frame (100 pairs) 117 Pre-connectorised optical fibre patch cords as per requirement 118 E-1 Port Interfacing Cable 119 EPAX (with cabinet)To be suitable both for FO Equipment and PLCC equipment with 2 digit, 3 digit & 4 digit Station numbering facility and programmable features such as using analog telephone & Laptop with (4 x 8 nos.) Local Subscribers 120 Digital Teleprotection Coupler suitable for integration with SDH terminal equipment to communicate on G 703 (E1, 2 Mbps) with minimum eight commands as per Technical Specification requirement. 121 Telephone Receiver (2-wire) for connection with EPAX,to be installed at different rooms of GIS cum Control& office building, C-type quarter, Colony buildings, Security room at main gate and other areas as per direction of Site-In-Charge. 122 Telephone cable (armoured) for all2-wire telephones & other requirements as per specification and as per requirement 123 STP Data Cable(CAT 6) with flexible GI conduit pipe for data transfer and for connecting IP phones (placed at Control room, communication room, Sub-Station In-charges room etc.) with FO Panel 124 Two no. licensed software for configuration of SDH and DPC to be handed over in two pendrive to Communication wing 125 48V, 300AH VRLA type Battery 126 48V, 60A Battery Charger 127 48V DCDB as per technical specification 128 Integration withexisting Fiber Optic System at connecting Sub-Stationon optical channel (STM-4), in consultation with the OEM, whose equipment is installed at other end. i) for voice & data communication ii)for carrier aided protection purpose -with supply of equipment and material(SFP,Patchcord, etc) as required. Intigration of new SDH, with existing SDH at connecting substation must not affect repoting of existing SDH at NMS, for which necessay action needs to be taken. 129 SAS system (as perindicative Scheme diagram, Technical Specification and requirement) -Monitoring & Control of the Sub Station from a far end Operting Station in addition to local unit 130 Rack mounted Main Server (Intel XeonSilver 4215processor or higher) with KVM console with display & all accessories ( server is to be mounted at SERVER PANEL-1, for connection FO port to be considered). 131 Rack mountedStandbyServer (Intel Xeon Silver 4215 processor or higher) with KVM console with display & all accessories ( server is to be mounted at SERVER PANEL-2, for connection FO port to be considered). 132 Local HMI (client Terminal) with 32 Monitor (LED) 133 Remote HMI PC with monitor (32LED) and necessary software for remote control and monitoring via local substation Gateway ,shall support IEC60870-5-104and IEC 61850 protocol. Remote HMI shall 100% replication of local substation HMI in all respect . 134 MainGateway (Intel Xeon Silver 4215 processor or higher)-Bay level data shall report to GATEWAY & SERVER independently. support simultaneous communication with 4 independent Master stations over IEC 104 protocol. 135 Standby Gateway (Intel Xeon Silver 4215 processor or higher)- Bay level data shall report to GATEWAY & SERVER independently. support simultaneous communication with 4 independent Master stations over IEC 104 protocol 136 Disturbance Recorder Cum Engineering Workstation PC (Industrial Grade) withMonitors (24 size- LED) 137 1 no PC with monitor (24 size LED) and necessary software for remote end to fetch DR data from relays and to configure all relays . 138 Rack mounted complete GPS unit, to be mounted in server panels . 139 Laser Colour Printer (suitable for at least A3 size) 140 Dot Matrix Printer 141 PRP Compliant, managed 20 FO port Ethernet Switch, industrial grade. 142 SAS application software with required license (suitable for 8000 signals, with life time validity) and other relevant operating & system software for running the scheme successfully. 143 Redundant Inverter of 5KVA or higher capacity in HOT-STANDBY Mode, on220V station battery , to feed SERVER, GATEWAY, HMI, Engineers WorkStation,Monitors, Ethernet Switches, KVM Switches,Printers, MODEM/ROUTER, etc. 144 Cabling System -Multimode / Single Mode Dual Window armoured fibre optic approach cable as required with HDPE duct, Flexible GI Conduit, all other power & control cables, Jacks, connectors and any other hardware to meet functional / performance requirement. 145 LIU having minimum 12 ports. 146 Red Box having minimum 4 RJ45 & 2 FO ports. 147 Remote Monitoring & control (wherever required) of Station Auxilliary System like Fire Fighting System, Air Conditioning System, Battery System, Lighting System, ACDB, 220V & 48V DCDB,replica of annunciator with buzzer & reset arrangement,& fire fighting annunciatoretc. complete as per technical specification requirement. For auxilliary system, AUX BCU to be mounted in separate panel. 148 Premium quality Integrated Control console deskwith chairs and other furnituresfor HMI Workstations, DR PC, telephones, storing of log sheets & manuals etc. suitable for three operators 149 Data Integration with SLDC and Back up SLDC End Including programme as per technical specification and also as per site requirement by directly communication with agency engaged for AMC of SCADA at SLDC and Back up SLDC End. 150 Router cum firewall shall be provided at local end for remote data transmission . 151 Network panel and other material / equipment / accessories required for successful completion ofthe job . 152 Automated notification in the form of SMS - i) SMS is required to be sent to 5 (five) mobile numbers at a time. ii) When required, any number can be deleted or altered. For that easy interface is to be provided. A log (with user-id and time) for the same is also required to be maintained. iii) The type of disturbaces or trippings for which SMS to be sent must be cofigurable. iv) All required hardwares and softwares to establish the system is under scope of the bidder. v) ISP connection in the name of WBSETCL and any formalities (if required) is to be done by the Bidder.SIM will be provided by WBSETCL. vi) After handing over the system, any recurring charges for SIM will be borne by WBSETCL. 153 Vendor Assessed Quantities: 154 ACDISTRIBUTION BOARD(comprising of Main ACDB, Sub-ACDBMLDB,DB) complete as per technical specificationand as per requirement. In addition to incomers from 2 nosStation Transformer, and Diesel Generator, suitable incomer for Solar Roof Top plant (40 kWp capacity) is to be considered as per requirement for GIS building and 11 KV room . 155 DCDISTRIBUTION BOARD (220 V DC)complete as per technical specificationand as per requirement 156 30V DCDB (with single source) for 11 KV System as per uploaded Tech spec 157 Control cable 1.1KV grade( Cupper ) as per TECH Spec and as per requirement as per approved drawing and cable schedulefor entire work including cable laying fromACDB & DCDB ,paneland any other equipment and also any equipments supplied by WBSETCL including Supply and installation of all required cables as per transformer & RTCC scheme drawing . Actual quantity will be finalised as per approved drawing and cable schedule and as per requirement 158 19 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 159 16 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 160 12 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 161 8 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 162 4 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 163 5 core, PVC, Armoured4 Sq. mm Copper as per Technical Specification.(For all CT, PT & CVT connection. For CT individual colour coded cables are to be used for individual core). 164 4 core, PVC, Armoured4 Sq. mm Copper as per Technical Specification. 165 5 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 166 3 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 167 2 core, PVC, Armoured2.5 Sq. mm Copper as per Technical Specification. 168 POWERCABLE-Multi Core, PVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification and as per requirement as per approved drawing and cable schedulefor entire work including cable laying fromACDB & DCDB ,paneland any other equipment and also any equipments supplied by WBSETCL including Supply and installation of all required cables as per transformer & RTCC scheme drawing (Allcablesshall be of Copper only.)Actual quantity will be finalised as per approved drawing and cable schedule and as per requirement 169 1C X 500 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 170 3.5C X 185 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 171 4C X 16 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 172 4C X 25 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 173 4C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 174 4C X 35 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 175 2C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 176 1C X 50 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 177 2C X 4 sq. mmPVC, Armoured, 1.1 KV POWERCABLE (Copper) as per Technical Specification 178 ACSR CONDUCTORwith accessoriesas per Technical Specification and as per requirement 179 ACSR Moose 180 ACSR Panther 181 Earth /Shield wirefor LM down comer 182 ALUMINIUM TUBULAR PIPE (Schedule 80) as per Technical Specification and as per requirement 183 3 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 184 2.5 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 185 1.5 IPS ALUMINIUM TUBULAR PIPE as per Technical Specification and as per requirement 186 CLAMPS,CONNECTORS,BUNDLE SPACER, Hardware fittings & accessoriesincluding equipment connectors(SUITABLE FOR SCH. 80) and as per approved ACSR conductor as per Technical Specification and as per requirement 187 220KV System 188 132KV System 189 33 KV System 190 11KV System 191 0.4KV System 192 Solid Core POSTINSULATOR& Anti fog type Disc insulatorwithhardware fittings and accessories as per Technical Specification andrequirement 193 220KV System 194 132KV System 195 33 KV System 196 11KV System 197 ILLUMINATION SYSTEM 198 ILLUMINATION SYSTEM COMPLETE (Both Indoor & outdoor)GIS building control building switchyard periphery C type building B type buildingPump House, Security Goomty / Barrack, DG Room,other area installation including light pole with foundation worketc as per technical specificationandrequirement. Allluminaire used shall be of LED type (irrespective of the type mention in specification) and all fans shall be of energy efficient BLDC type. 199 Dehumidifier as per specification 200 Dehumidifier with suitable capacity & size for 33 KV Switchgear Roomas per approved drawing 201 Direct Stroke Lightning Protection for GIS building(considering Roof Top Solar Plant), Control builting, FFPH, as per relevant IEC. 202 Furnitures and Gadgets for Conference Room - Premium quality furnitures of reputed brand like Godrej or equivalent are to be considered. However, before procurment of furnitures and gadgets, written approval from WBSETCL site-in-charge is to be taken. 203 Conference table suitable for 30 person 204 Executive High Back chairs 205 Digital Audio / visual projector - 4K resolution, 2 nos USB 2.0 and 2 nos HDMI 2.0 ports (Preferred make - Sony, Epson, JVC, Panasonic) 206 64 or higher Interactive smart whiteboard of reknowned make 207 Meeting room Audio system (microphones - 30 nos., wall mounted speakers, amplifiers, other required hardwares & softwares) - (Make Harman, Sennheiser or equivalent) 208 Decorative dimmable LED lights (average 500 lux level) 209 High quality window blinds matching with room interior 210 AIR CONDITIONING SYSTEM COMPLETE as per Technical Specification and as per requirement (All machines must be of same make.) 211 RelayRoom and SAS Room & communication Room- Ductable Air Conditioning System is to be considered. -All machines must be ofsame make . Considering continuous operation ,machines must be of Industrial gradeand refrigerent must be of R32 or better environmental standards .as per spec 212 5star rated Split type Non-Ductable AC for Battery & Chargerroom, In-Charge Room, Conference room DB Room etcAll machines must be ofsame make . Considering continuous operation, machines must be of Industrial grade / 5 star rated split and refrigerent must be of R32 or better environmental standards as per spec 213 FIRE FIGHTING & FIRE PROTECTION SYSTEM - As per Tech spec 214 Fire hydrant system in ring formation along the periphery of switchyard covering entire portion (Entire 132 KV Switchyard &220 KV switchyard), GIS building, Control Building etc as required. 215 Portable fire extinguisher & bucket at key locations of switchyard ,control room, GIS building, office area ,residential and other building and near each Power Transformer as per Technical spec . and as per requirement. 216 Fire Alarm System (Concealed cabling is preferred ) - i) Smoke & heat detection system covering all the rooms of GIS cum Control room building ii) adequatebeam detector with redundancyfor GIS room - as per technical specification & requirement 217 CCTV Survelliance system (as perTech specification ) - The system shall be capable to integrate with central control centre. The actual quantity shall be finalised depending on the approved design . 218 Fixed Bullet camera (short range) with all accessories -as per technical specification. 219 Fixed Bullet camera (long range) with all accessories -as per technical specification. 220 Fixed Dome camera with all accessories-as per technical specification. 221 PTZ camera with all accessories-as per technical specification. 222 IP Based Outdoor Thermal Camera with all accessories as per technical specification 223 VMS management server with 30 days recording facility for minimum 40 cameras (with MS Windows professional operating system) -as per technical specification. 224 Video surveillance software and license for 40 cameras or more (which shall be valid for lifetime) -as per technical specification. 225 40 4K Display, 24 x 7 operation; as per technical specifications 226 2 KVA online UPS with 30 minute backup-as per technical specification. 227 24 Port PoE 1G Network Switch with 4 nos SFP Ports along with 1G SM SFP Modules; as per technical specifications 228 Required number of Industrial Grade 4 Port 1G Network Switch with 2 Nos. SFP Ports along with 1G SM SFP Modules; as per technical specifications 229 Media Converter, PTZ keyboard with joystick, cabinet, junction box, POE injector, LIU, power supply, Indoor floor mount rack, outdoor rack, clamp, connector and hardware for camera fixing etc. -as per technical specification. 230 All types of armoured fibre optic cables, CAT 6 cables, armoured copper cables, HDMI cable, HDPE conduits, PVC straight pipe and accessories etc. required to complete the system-as per technical specification. 231 Computer Table, rolling Chair, additional mounting pole and Other tit-bit materials not specified above but required for successful completion of CCTV surveillance systemas per site requirement. 232 NEXT GENERATION FIREWALL/ CYBERSECURITY GATEWAY and all required hardwares & software for integration with remote Control Command & Centre AS PER TECHNICAL SPECIFICATIONS. 233 One additional viewing unitsat In-Charge Room with all required hardware and software 234 SUBSTATION EARTHING SYSTEM : As per Technical specification 235 32mm dia or higherMS rod for main earthmat grid,corner mesh and periphry for outdoor switchyard . The actual quantity shall be finalised depending on the approved design (Only design quantity with lap length without any wastage for main mat, periphry& corner mesh will be considered for payment.) The Earthmat design is to be done considering earth resistivity of 30 Ohm-m oractual measured value whichever is higher. 236 32mm dia or higherMS rod for riser below and aboveground auxiliary Mat fencing and gate earthing bending length and overlapping length as per requirement & as per approved drawing 237 GS flat for riser above ground / cable trench & other areas.Rod/pipe electrode , test link and other materials etc. - as per requirement, technical specificationand approved design/layout including earthpit. 238 Earthing for GIS enclosure and GIS building as per manufacturers recommendation including civil work. 239 Earth Link Box, SVL, Earth Strip, earth continuity cable for single bondwherever required for Earthing of allXLPE Cablecomplete at cable conductor junction point etc as per technical requirement / as per approved drawings. 240 Earth Strip and other accessories including lugs for link box etc wherever required for Earthing of allXLPE Cablecompletei as per technical requirement / as per approved drawings. 241 3 ph Earth Link Box with SVLas per technical requirement / as per approved drawings. 242 3 ph Earth Link Box with outSVL as per technical requirement / as per approved drawings. 243 1 ph Earth Link Box with SVL as per technical requirement / as per approved drawings. 244 1 ph Earth Link Box with outSVL as per technical requirement / as per approved drawings. 245 6.6 KV/3.8 KV Copper Bonding Cableas per technical requirement / as per approved drawings. 246 1.1KV Grade 240 sqmm CopperEarth continuity Cableas per technical requirement / as per approved drawings. 247 GRID CONNECTED ROOF TOP SOLAR POWER SYSTEM (As per Technical Specification) 248 5kWpSolar Roof Top plant (at the roof of GIS & Control building) having high quality mono. crystalline type solar PV module from reputed brand (as mentioned under WBSETCL Makers list), Mounting structures (Fixed Type) with Civil pedestals including civil work as per requirement. 249 i) High quality inverter from reputed brand as mentioned under WBSETCL Makers list) suitable for 40kWp solar roof top plant. ii ) All other required accessories- Data logger with CPU, LCD monitor, UPS,Metering,Junction box & distribution boxes, Type-II Surge protective device, string monitoring uints, pyrano.meter with sensors, all Cables, hardware, earthing & lightning protection materials, required furnitures & cabinets, conduits etc. to complete the system of 40kWp grid connected plant 250 Essential spares necessary for operation, routine maintenance and testing of equipment supplied for 3 years to be covered under Annual Maintenance Contract. 251 MISCELLANEOUS ITEMS -As per Technical specification 252 i) Glow signboard for name of the substation- minimum size 50 sq ft, ii) schematic SLD on glow signboard iii) Danger plate, phase plate, bay nameplate etc iv) Statutory caution boards made of mild steel of 250 mm x 200 mm and at least 2 mm thick and vitreous enamelled, white on both sides and with inscription in signal red colour on front side as required. v) Shock treatment chart in local and English language duly mounted on wooden frame with glass as required vi) Safety Slogans - to be put up in Offices and Sub-station premises (Site-in-charge may select the slogans from WBSETCL Safety Manual, Version 2.0, Page 18)vii) WBSETCLLOGO & Sub-Station Nameat main gate of Sub-Station entry with good quality durable materials 253 Ferrules & lugs, GI conduit, Cu flexible wires for panel earthing etc. 254 .Angle, Channel and other hardwares for installation of panels, DBs etc. 255 Supply of itemsfabrication marker, tags,Protection cover tiles, PVC warning tape, route marker, jointing marker, clamps connector etc as per specification & approved drawing 256 Trefoil clamp suitable for approved XLPE cable 257 Bay marshalling kiosk, dummypanel, junction box, , Lighting & other Distribution Boards etc. As per requirement& as per Technical specification 258 Bay marshalling kiosk, 259 Dummypanel, 260 Junction box, (CT,PT,CVT as per requirement 261 Distribution Boards as per requirement 262 Cable Tray (Ladder type & perforated type etc ) as per requirement for indoor cable trench and and as per requirement within GIS building 263 Industrial type Exhaust Fans and mechanised louvers of required quantity for 220KV & 132KV GIS Hall, 33 KV indoor switchgear& 11 KV Switchgear Room as per requirement & as per Tech Spec 264 HDPE Pipes 265 200 mm Dia 266 150 mm Dia 267 One storage type RO + UV + UF water purifier for office building 268 Spares:- Spare relays including test jack are to be delivered after duly tested at CTD WBSETCL on chargeble basis. All materias will be as per scheme of this project ) 269 Distance Protection relay (as approved at 220 KV Line bay for Main-1 potection) 270 Distance Protection relay (as approved at 220 KV Line bay for Main-2 potection) 271 Distance Protection relay (as approved at 132 KV Line bay for Main-1 potection) 272 Distance Protection relay (as approved at 132 KV Line bay for Main-2 potection) 273 Transformer differential Relay(same as approved for 220 KV Transformer bay) 274 Transformer differential Relay(same as approved for 132 KV Transformer bay) 275 BCU (same as approved for 220KV bays ) 276 BCU (same as approved for 132KV bays ) 277 BCU (same as approved for 33KV bays ) 278 BCU (same as approved for auxilliary system) 279 PRP Compliant, managed Ethernet Switch, industrial grade. (same as approved for SCADA Systeml) 280 Over Current& Earth fault Relay 281 Bus Bar Differential Relay (One Central Unit and one Peripheral Unit) 282 Trip Relay 283 VT selection Relay 284 Spares: Spare are to be delivered at nearest store in consultation with in charge All materias will be as per scheme of this project. 285 220KV GIS Circuit Breaker complete mechanism 286 220KV GIS Disconnector complete mechanism 287 220KV GIS High speed earth switch complete mechanism 288 132KV GIS Circuit Breaker complete mechanism 289 132KV GIS Disconnector complete mechanism 290 132KV GIS High speed earth switch complete mechanism 291 33KV CT - same as supplied for Line bay 292 33KV CT - same as supplied for 50 MVA Transformer bay 293 Safety Equipment 294 Full Body Safety Harness with Twin rope lanyard, length < 3 meter with waist belt and accessories as per IS - 3521 295 First aid box complete with all items (as perAnnexure in line with WBSETCL Safety Manual, Version 2.0) - to be placed at Control Room & Maintenance Room 296 Discharge cum earthing rod - Highly insulated FRP telescopic type with all accessories suitable for 245 KV system or higher,CPRI type tested as per IEC - 1230:1993 & IEC - 1235 with tested epoxy earthing rod for 10 KV /ft for 1 min as per IEC- 855 297 Safety Helmet - Made of Polyethylene/ glass fibre reinforced with head band, cradle, strap fittings with withstanding temp of 50oC as per IS – 2925 (Suitable stand / Racks are to be provided to store the helmets. Helmets are to be colour coded for visitors, technical staff and others) 298 Gum Boot made of Rubber (Suitable stand / Racks are to be provided for storage.) 299 Renowned make High Voltage Detector - Suitable for 11 KV to 245 KV , 50 HZ system with sensing level 1 mtr. for 132/220/ 400 KV system complete with HV probe, 5.0 mtr telescopic insulation stick with visual LED and Buzzer indication as per IS - 13771/ IS - 2071 300 Safety shoes - Double density PU sole, leather with hard Toe cap, Non-woven Eva lining, anti static /electric shock proof Insole (with minimum electrical resistance and high voltage of 18 KV), conforming to IS – 15298 301 Hand Gloves - Made of soft quality rubber, seamless latex, shock proof, for electrical purpose suitable upto33 KV -system as per IS - 4770 302 Electric Arc Protection Suit - FR suit compatible to wearwith hood, jacket, face shield, trouser etc complaint with NEFA- 70 E standard as per IEC - 61482-1-1-2007/9 303 Insulating mat - High density insulating matsasper IS - 15652 with ac(rms) kv 3.3, sizes of rolls 5000 mm X 1000 mm (to cover entire operating length of 33KV switchgear, DB room & Panel room) 304 Safety Ladder - Single step self supporting type with complete Fiber glass, 3 inch wide, antiskid fibre steps, non - slip fibre glass shoes with thick rubber pad, Height 8 ft 305 Safety Torch / Search Light - Body:- Fibre glass, PCB - glass epoxy to meet all weather condition, Circuitry - IC Control, Charge -220 Volt AC, Light Source - 12 V Halogen Bulb, 55 watt, Power source - 12 volt, 7 AH sealed battery, Extra jack tobe provided for direct lightning by 12 volt DC, Continuous run - 2 hr High beam Rechargeable Hand Held Search light 306 Lifting Rope - Hemp Rope / Sisal Rope / Manila Rope - One inch dia., 30mtr long 307 Passenger Elevator (6 person capacity, ) - For GIS & Control buildingcomplete in all respect as per technical specification and as per requirement. 308 Industrial grade Vacuum Cleaner of reputed make 309 Civil Part: 310 Supply, fabrication, galvanisaton of variousswitchyard & equipment structures,LM-Lattice type ( 35Mtr or 50 Mtr-based on DSLP Calculation), XLPE cable supporting structure completeas per approved electrical layoutdrawings and technical specification (Electrical & civil) and as per requirement complete. (including Nuts & Bolts and foundation bolts) 311 Switchyard Structures including Nuts & Bolts 312 Foundation Bolts for switchyard structures including nuts, washers and anchor plates (Foundation Bolts shall be galvanisedupto threaded length from top) 313 Supply, fabrication of various structures (MS FLAT, MS Plate, Insert plate, Angles, Transformer Rail, Channels, ISMB, Chequred plate, MS grating for GIS Building, Transformer, Cable trench , drain etc. as per approved drawings, technical specification (Electrical & civil) andrequirement complete.
Contract Date: May 11, 2026 Contract Value : ₹ 242.30 Crore
Government Departments No of Bidders 3
West Bengal View Result →
6.
Educational and Research Institute #10908628 AOC
Notice Inviting E-Tender For Laboratory Setup For Vtcs Of Jhargram And Paschim Medinipur Districts Including Supply, Installation And Commissioning Of Tools/Equipment/Instruments Etc. For Implementation Of Vocational Education In West Bengal- 1 Hot air oven 2 Seed drill 3 Sealing machine 4 Soil Auger 5 BOD incubator 6 Sowing machine 7 Soil testing kit 8 Sprayer 9 Compound Microscope 10 Pressure cooker 11 Wheel hoe 12 EC meter 13 Measuring tape 14 Sleeve trier/Nobbe trier 15 Heater 16 Hose pipe 17 Spade 18 Hand leveller 19 Watering can 20 Moisture box 21 Sickle 22 Sickle 23 Grinding machine 24 Germinator 25 Four stroke petrol engine with CNG setup- working condition 26 Power tiller 27 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 28 Riffle type divider 29 Model Tractor 30 Processing / Oil extraction machine ( Soxhlet Apparatus) 31 Dibbler 32 Sprayer 33 General Balance 34 Soil testing kit 35 Foot Sprayer 36 Wheel hoe 37 Measuring tape 38 Pruning shear 39 Hose pipe 40 Heater 41 Forester’s shear 42 Hand fork 43 Spade 44 Hedge shear 45 Crow-bar 46 Grass shear 47 Hand leveler 48 Pruning saw 49 Axe 50 Hand cultivator 51 Drainage hoe 52 Pruning knife 53 Garden trowel 54 Watering can 55 Sickle 56 Digging fork 57 Garden hand rake 58 Kurpi-Varvari 59 Iron peg , Field board 60 Grinding machine ( turmeric powder and seed spices powder) 61 Aluminium oil extraction unit large ( for lemon grass & citronella) 62 Pouch sealing machine 63 Pilfer proof cap sealing machine 64 Hand refractometer 65 Weeder 66 Soil testing kit 67 Moisture meter 68 General Balance 69 Foot Sprayer 70 Salometer 71 Brix hydrometer 72 Electrically operated mixer cum grinder 73 Measuring tape 74 Knife Set 75 Heater 76 Hose pipe 77 Vegetable slicer, Potato slicer, Pineapple slicer 78 Spade 79 Hand leveler 80 Axe (Local made) 81 Pruning Secateur 82 Watering can 83 Fruit Tree Picking Pole with Basket 84 Sickle 85 Pulper 86 Cabinet dryer 87 Crusher 88 Autoclave (Laboratory type) 89 Spiral or screw type juice extractor. 90 Can sealer or double seamer 91 Water distillation unit 92 Wheelbarrow 93 Can vacuum testing gauge 94 Hand operated metal grinder 95 Washing machine 96 AC Motor Trainer Kit 97 Mixer cum grinder 98 Soldering & De-soldering Station 99 Megger 100 Geyser 101 ½ HP Induction motor Three Phase 102 Wooden Panel board with following accessories 103 Electric Power Drill 104 Clamp On Meter 105 Vacuum cleaner 106 Multimeter 107 ¼ HP Induction motor Single Phase 108 TPIC with Neutral main switch 109 Hand Drill Machine Electric with Hammer Action 110 Single phase Energy meter 111 Sodium vapour lamp 112 Mercury vapour lamp 113 Steam iron automatic 114 Electric rice cooker 115 DOL starter 116 Adjustable wrench 117 Screw driver set 118 M.C.B 119 Bench Vice 120 Wooden Board for wiring 121 Insulated Combination Plier (Heavy Duty ) 122 DPIC main switch 123 Spanner set 124 Cable cutting pliers 125 Analog multi-meter 126 DOL starter 127 Cutting pliers 128 Tools maker vice 129 Soldering iron 130 Crimping tool(pliers) 131 Ring Spanner 132 Screw driver set 133 Precision set of screwdrivers 134 M.C.B 135 Adjustable wrench 136 Hacksaw frame adjustable 137 De-soldering pump electrical heated, manual operators 138 Insulated combination pliers 139 Insulated side cutting pliers 140 Insulated screw driver 141 Insulated Combination Plier (Heavy Duty ) 142 Earthing rod with chain, Fish Wire 143 Electric bell 144 File flat second cut 145 Distribution box 4-way 146 File flat bastard 147 Handsaw 450mm 148 Soldering Iron Changeable bits 149 Ball Pin Hammer 150 Spirit level 151 3-pin 16A wall socket, flush type 152 Plier-Flat Nose 153 File flat smooth 154 3-pin 16A wall socket, mounting type 155 Ceiling rose 6A, 250V 2plate 156 Chisel-Cold-Flat 157 Fuse 158 Hammer ball pen 159 Fan regulator 160 3-pin 6A wall socket, flush type 161 Continuity tester 162 Hacksaw with frame adjustable 163 Wooden saw 164 Combined LED or fluorescent tube 165 Fuse 166 Standard wire gauge 167 I.C.T.P. switch16A 400V 168 S.P. switch 6A, 250 V mounting type two-way 169 S.P. switch flush type two way 170 3-pin 6A wall socket ,mounting type 171 2-pin 6A wall socket, flush type 172 I.C.D.P. switch16A250V 173 I.C. cut out 16A, 250V 174 Intermediate switch 6A, 250V 175 2-pin 6A mounting type 176 S.P. switch 6A, 250V mounting type single way 177 Kit-kat fuse 178 Kit-kat fuse 179 S.P. switch flush type, single way 180 3-pin16A 250V plug 181 Bell-Push/switch 6A, 250V mounting type 182 HRC Fuse-16A 183 PVC Cu wire 184 Terminal plate 16A 250 V3-way 185 Bell-Push / switch 6A, 250V flush type 186 GI junction box-1,2,3&4way square type 187 Bakelite pendent-holder 188 3-pin 6A 250V plug 189 Toggle switch 6A 190 Neutral link 16a mps 191 GI conduit pipe 192 PVC Channel 193 PVC pipe coupling 194 PVC junction box-1,2,3 and 4 way 195 PVC bend 196 PVC Elbow 197 PVC Tee 198 GI conduit coupler & Inspection Coupler 199 GI Elbow & Inspection Elbow 200 Tees & Inspection Tee 201 PVC Casing for wiring 202 PVC conduit pipe 203 Solar Photo-voltaic Cell : Solar power generation 204 Storage Battery 205 Complete set up of Single crystalline silicon PV Cell 206 Pyranometer 207 Solar street lighting 208 Solar home lighting system with all necessary components for student demonstration 209 Data logger 210 Concentrated solar collector 211 Flat type solar collector 212 Solar cooker 213 PVC / XLPE low tension cable jointing kit 214 D.C shunt Motor 215 Three phase Energy meter 216 Voltage Stabilizer 217 Room Heater 218 4-point starter 219 Tools makers vice 220 Tubular box spanner 221 Magneto spanner set 222 LED lamp 223 Allenkey set (Hexagonal set of 9) 224 Insulator model a) Pin type 225 Insulator model b) Strain type 226 Insulator model c) Disc type 227 Round Nose pliers 100mm 228 Round Nose pliers 2no. of set 229 Connecting screwdriver 100mm 230 Steel rule graduated both in Metric and English Unit 300mm 231 Long Nose pliers8 232 Micrometer 233 Steel measuring tape 3 meters 234 Hammer ball pen 500 grams 235 Neon tester 500V 236 PVC cable & XLPE cable 4 core, 3 & ½ core in m 237 Iron connector-5A, 250V 238 Digital compression testing machine 239 Theodolite transit latest model with all accessories 240 Aggregate impact tester with cylindrical cup and measuring cylinder 241 Auto level latest model with all accessories 242 Hand GPS-latest version 243 Mortar cube vibrator 244 Aggregate Crushing Value Apparatus 245 Concrete mixer 246 Dumpy level 247 Manual bar bending machine of suitable size 248 Bulk density apparatus (Cylindrical measure for fine aggregate and coarse aggregate ) 249 Turbidity Test Kit 250 Power cutter of suitable size 251 Box sextant 252 Planimeter Digital 253 Plane table with stand, accessories & water proofing Cover 254 Weighing plateform digital 255 Vicat apparatus with plunger, needles and mould 256 Standard IS sand 257 Oven Small Size 258 Electronic balance 259 Tile cutter 260 Bar bending table 261 Drill and bit set 262 Ratchet rack : with post and clamp flat 5 drill 6 to 35 mm by 0.2 mm. 263 Mortar board : 2000x2000 264 Metal cross staff- box type 265 Telescopic alidade 266 Slump test apparatus with temping rod 267 Water testing kit – for ph value 268 Thickness and length gauges (Elongation and Flakiness Index) 269 Plumbers metal melting pot 270 Metal cross staff- open type 271 Ratchet pipe die : 15 mm to 32 mm 272 Tap and die set to cut BSP Thread 273 Height indicators 274 Metric chain : 30 m & 20 m 275 Prismatic compass with stand and all accessories 276 Chain pipe wrenches : 90 mm-650 mm 277 Engineers chain 278 Sieve for sand in adjustable stand : 1mm, 100cm x 60cm fixed in steel frame 279 Optical square 280 Mortar board : 2 mtx2 mt. 281 Slump Cone 282 IS Brass sieves - set 283 Stillson pattern pipe wrenches : 450 mm to take pipe up to 52 mm dia. 284 Pipe vice to grip pipes up to : 77mm 285 Drawing Board : 1000mmx700mm 286 Brushes for painting 287 Leveling st-4M 288 Ranging rod Steel-2M 289 Offset rod : 2M 290 Measuring cylinder : set of 100 ml., 500 m., 1000 ml. 291 Pick axe 292 Pyconometer for specific gravity 293 Pickaxe. 294 Le Chatelier Mould (for soundness test of cement) 295 Survey plotting scale : 8 scales with offset scale in box 296 Mason square : 30x60 cm 297 Tenon saw, dovetail saw 298 Le Chateliers flask (For specific gravity test of cement) 299 Monkey Plier (gas pliers) 300 Aluminum float 301 Tool caulking 302 Flat Smithy tong. 303 Saw plumber : 300mm 304 Stop watch Digital 305 Screw driver Set 306 Land measuring steel tape 30 Meter long 307 Brick hammer with handle 308 Crow bar : 30mm dia. 1.5 m long of mild steel 309 Cube mould : 150mm Size 310 Spanner monkey up to 50 mm 311 Stilson wrench : 200 & 350 mm 312 Land measuring plastic tape : 30 mt long 313 Shovel 314 Spade 315 Telescopic pipes / props 316 Mason plumb rule with spirit Level 317 Trowel : 25 cmx10cm 318 Plumb rule and Bob 319 Non porous plate 320 Graduated cylinder 321 Adjustable spanner : A375 322 Double face hammers 323 Hacksaw frame adjustable : 250 to 300 mm 324 Level spirit wooden : 300mm 325 M.S pan : 45CM Dia. 326 Bucket G.i. : 35 CM Dia. 327 Sprit level : 30cm long 328 Bolster 329 Bevel 330 Wooden mallet 331 Gauging trowel 332 Sampling scoops : 2kg and 5 kg 333 Plumbers ladle 334 Trowel 125 335 Farma of mild steel for measuring aggregate : Heaving volume 0.03472 cm 336 Masonry grinder 337 Cutter, pipe wheel type : 6 mm to 25 mm 338 Caliper outside : 150mm 339 Steel tapes : 5 Meter long 340 Hammer ball peen : 800gms. 341 Cutting pliers 342 Inside caliper : 150mm 343 pointing Trowel : 6 344 Steel float 345 Measuring tape : 15 Meter long (Steel) 346 Bar bending lever (suitable diameter and length) : In m 347 Float wooden 348 Chisel : different sizes 349 Plumb bob : 50gms. 350 Bending pipes (suitable diameter and length) : In M 351 Line pin corner block 352 Wire brushes 353 Bending pipes : suitable dia& length in m 354 Total station latest model with all accessories 355 DGPS-latest version 356 Motorised sieve shaker 357 Floor polishing machine 358 Concrete vibrator : pin type & plate type 359 Electric drilling machine : 6 to 35 mm by 0.2 mm. for drilling 360 Power operated cutting machine 361 Vibrating machine : 12000 ± 400 rpm 362 Portable hand bender of suitable size 363 Spray painting machine 364 Drums : 200 liters capacity 365 Polishing machine 366 Abney level 367 Electric heater 368 Computing scales five hectares 369 Gunters chain 370 Offset scale for cadastral survey 371 Computing scales two hectares 372 Indian pattern clinometers 373 Telescopic/ adjustable spans 374 Straight edge 375 Steel / plywood shuttering plates 376 Hammer 5 kg 377 Water tube : 6m 378 Hammer 1 kg 379 Magnifying glass 380 Marking rope & thread : 15m 381 Chisel cold flat : 20 x 250 mm 382 File flat rough : 300mm 383 Four stroke petrol engine with CNG setup-working Condition 384 Diesel Engine – CRDI - 4 stroke for Dismantling and Assembling with Swiveling Stand. 385 Disk brake in working condition with caliper assembly with all parts 386 Drum brake assembly in Working Condition 387 Cut section working model of automatic transmission Gear box 388 Radiator cut section-cross flow 389 Cut section working model of Single plate clutch Assembly 390 Cut section of cross ply and radial tyres 391 Tyre pressure gauge with holding nipple 392 Vernier caliper : 0-300 mm with least count 0.02mm 393 Different type of piston model : 3 Different Types on board 394 Spanner, ring set of 12 : 6 to 32 mm. (metric) 395 Philips Screw Driver set of 5 pieces : 100 mm to 300 mm 396 Fuel feed pump for Diesel : Hand operated Plunger Type 397 Piston ring compressor 398 Piston Ring expander and remover. 399 Outside micrometer : 0-25mm 400 Automotive oil pump for dismantling and assembling 401 Valve Lifter 402 Carburetor – Solex : Solex for dismantling and assembling 403 Caliper inside with spring : 15cm 404 Calipers outside with spring : 15cm 405 Pliers combination : 20cm 406 Gasket Cutter : 5-35mm 407 Circlip pliers Expanding and contracting : 15cm 408 Dividers with spring : 15cm 409 Hammer Ball Peen : 0.75kg 410 Hammer Mallet 411 Hammer Plastic 412 Feeler gauge 20 blades (metric) 413 Hydraulic jack HI-LIFT type : 3 Ton Capacity 414 Two wheeler (refurbished) 415 Demonstration board of MPFI system : With injectors, rail, inlet manifold, throttle body, distributor, ECU, purge valve, sensor, crank pulley, fuel tank module. 416 Work bench : 250 x 120 x 60 cm with 4 vices 12cm Jaw 417 Torque wrenches set : 5-35 Nm, 12-68 Nm & 50-225 Nm 418 Battery –charger : Capable to charge batteries from 5AH – 150AH. 419 Battery –charger : Capable to charge batteries from 5AH – 150AH. 420 Spanners socket with speed handle, T-bar, ratchet and universal set of 28 pieces with box : up to 32 mm 421 Spanner D.E. set of 12 pieces : 6mm to 32mm 422 Steel tool box with lock and key (folding type) : 400x200x150 mm 423 Allen Key set of 12 pieces : 2mm to 14mm 424 Grease Gun 425 Electric Soldering Iron : 230 V 60 watts – 230 V 25 watts 426 Hacksaw frame adjustable : 20-30 cm 427 Hammer ball peen with handle : 0.5kg. 428 Electrician Screw Driver : 250mm 429 Flat File , second cut 25cm 430 File flat , bastard : 20cm 431 Hands file for Second cut flat : 20cm 432 Spanner, adjustable : 15cm 433 Scriber : 15cm 434 Test Jig box : PCB Jig Box, 220V, Dimension: 1.5x1x1 Feet 435 Different models of Water purifier, Microwave oven : set 436 Inverter set with stabilizer, battery charger, step down transformer : set. 437 Bonding machine 438 Different models of LED and LCD TV receiver 439 LCD Tester 440 SMD rework station 441 Soldering Station : Temp range: 200~480degC, Temp stability: +-2degC,Max power: 60W, Tip Compatibility: 900M Series, Inputvoltage: AC220V / 50 Hz 442 Battery tester : 2Ah-220Ah Internal Resistance Tester Accurate Digital Auto Battery Analyzer Digital Battery Tester 443 Bench power supply 444 Screwdriver set, tweezers, nose pliers, wire cutters etc. : in set. 445 PPM meter 446 Digital Multimeter (Black 2000 Counts) 447 SMD tester 448 Hot air gun 449 TDS meter 450 Soldering Iron : Soldering Iron 60W, Soldering Gun Solder Weld Welding Iron Tool 160-240 V 451 De soldering pump, 452 Dual CRO 30 MHz 453 Micro wave power meter 454 LED Magnifying Lamp, 220-240V 455 Electrical drill machine 456 BIOS programmer 457 Antistatic Mat (ESD Mat) : Electromark Esd Mat 6.5 X 2 Feet, Blue for static charge Dissipation 458 Hot air blower : 1500W Heat Gun cum Hot Air Blower with Dual Temperature Control 459 Back light Tester 460 Battery Booster : 12 volt dc adapter, 12V, Adapter, adaptor, battery booster 461 PTC heating element 462 Setter Hatcher Machine 463 Wt. Balance 464 Simple microscope 465 Chaff cutter 466 Vaccines as- RD, GD, IBD, Fowl Pox etc.Vaccinator, & First aid kit etc. 467 Rake, Fan, Litter material 468 Trevis/Crate 469 Milking machine 470 Sprayer 471 Poultry feeder, Drinker, water Heater 472 Postmortem set 473 Brooder, Brooder Guard & Hover 474 Mixer Grinder 475 veterinarians stethoscope 476 Thermometer 477 Haemometer 478 Setter Hatcher Machine 479 Aerator 480 Vaccines as- RD, GD, IBD, Fowl Pox etc. Vaccinator, & First aid kit etc.
Contract Date: Jan 16, 2026 Contract Value : ₹ 1.02 Crore
Government Departments No of Bidders 6
West Bengal View Result →
7.
Educational and Research Institute #10815224 Price Bid
Procurement, Installation And Maintenance Of Infrastructure And Communication Technology (Ict) Equipment And Consumables Procurement, Installation And Maintenance Of Infrastructure And Communication Technology (Ict) Equipment And Consumablesprabodhini College, Porvorim, Goa. , Category 2: Ict Equipment’S Estimated Cost:59,88,000 /- , Digital Metal Podium Powder-Coated Metal Cabinet, Free-Standing, With Lockable Caster Wheels For Mobility; Crca Steel ~1.6 Mm Thick; Metal Top; Locking Security System; Storage Space For Cpu, Keyboard & Mouse, Laptop Trays, Side Shelf, 21.5? Interactive Touch Monitor; Motorised Tiltable Monitor Mechanism; Scratch-Resistant, Anti-Glare Screen; Full Hd (1920×1080) Resolution; Supports Finger & Stylus Input; Annotation Software Capabilities, Built-In 120 W Rms Amplifier; Two 30 W Wall Speakers; Two Gooseneck Microphones; One Wireless Handheld Mic; One Wireless Collar Mic; The Usual Av Input/Output (Vga, Hdmi, Usb, Aux, Xlr, Etc., Cpu: Intel I5; Ram 8 Gb; Storage: 500Gb Hdd; Wifi And Bluetooth; Includes Keyboard & Mouse., Vga, Hdmi, Usb, Aux, Xlr; Rj-45 Lan Port; Vga/Hdmi Switcher; Front Panel “Source” Control; Power Sockets Etc., Dimensions: 28? X 22? X 47? (L × W × H) ; Weight ~ 80 Kg, Minimum 1 Year Warranty , Smartboards Preffered Make:Viewsonic/Samsung/Solitaire Panel Size: 75,Type/Tech: Ips Type,Display Area (Mm): Minimum 1650.24(H) × 928.26(V),Aspect Ratio: 16:9,Native Resolution: 4K60hz,Colours: 10 Bits,Brightness: Minimum 450 Nits Or Higher,Contrast Ratio: 1200:1 (Typ) 5000:1 (Dcr) Or More,Response Time: 8Ms Or Better,Viewing Angles: H = 178, V = 178 Typ.,Backlight Life: Minimum 50,000Hr Of Higher Surface Treatment: Hardness: 9H Or Higher,Thickness: 4Mm,Orientation: Landscape,Processor: Octa Core Arm Cortex-A73*4 + A53 * 4 Or Higher,Android 11.0 And Upgarade To 13,Ram: 8Gb Ddr4 Or More,Storage: 64Gb Or More Type/ Tech: Ir Recognition/ P-Cap,Touch Point: 40 Points Or Higher,Hdmi In: Minimum 3,Rs232: X1,Ops: 1 Audio Out: 3.5Mm X1,Spdif: X1, Rj45: X2,Type A: Usb 2.0 X2, Usb 3.0 X4 “Smartport Usb” To All Channels,Type B: X2, For Touch,Type C: X1 (Dp 1.2, Usb2.0, Pd65w, Ethernet 100M),Speakers: 12W X 2 + 16W X 1 Or More Light Sensor : Yes,Power Consumption: 140W Or Less,Eye Care Certification Like Low Blue Light & Flicker Free Certifications: Tuv, Fcc, Energy Star 8, Emc/Ce, Cb, Rohs & Doc, Reach Test Report, Weee Test Report, Bis, Epat Software Features: Entity Management & Device Manager To Manage Ifp Remotely Without Lan, Also To Share Content & Broadcast Messages Remotely Onto Ifps,Same Whiteboard Software For Windows, Android & Browser,Live Webcast Directly From Interactive Whiteboard Software To Youtube And Facebook, Screen Recording,Artificial Intelligence Pen,Wireless Casting On Ifp From Mobile & Laptop,Drag And Drop Youtube Videos, Direct Images From Google Search,Handwriting Recognition Text To Speech Inbuilt In Whiteboard Software (Male Or Female Voice),Create Online Quiz With Time Limit From Whiteboard Software,Auto Grading Of Answers,Download Results As Excel Sheets,Sign In Directly From Qr Code On Interactive Whiteboard Software And Link Cloud Storages (Google Drive, Microsoft One Drive, Box Or Drop Box),4K Ops Module With Intel Core I5 Or Better, 8 Th Generation Or Better, 8 Gb Ram 256Gb Ssd Or Better. Ops Secification: 4K Ops Module With Intel Core I5 Or Better, 8 Th Generation Or Better, 8 Gb Ram 256Gb Ssd Or Better. Additional: Latest Microsoft Office And Ups , Video Conferencing Equipment- Webcamera Along With Wireless Speaker And Bluetooth Dongle Microphones For Large Classroom Setup- Evota Ultra-Wide 4K Resolution Camera For High-Definition Video Capture, Hd Support, Built In Microphone, And Microphone Wireless Speaker Phone With Bluetooth Dongle, Speaker Output, Ai Noise Reduction, 8 Mic Array, Built In Dsp,High-Quality Audio Output Suitable For Conference Or Meeting Rooms,Plug-And-Play Support , Camera And Lens- Preffered Make:Canon, Nikon Sensor: 24.2Mp Full-Frame Cmos Sensor,Processor: Digic X,Iso Range: 100–102,400 (Expandable To 50–204,800) Autofocus: Dual Pixel Cmos Af Ii With Up To 1,053 Af Points,Continuous Shooting: Up To 40 Fps With Electronic Shutter,Viewfinder: 2.36M-Dot Oled Evf,Display: 3.0 Vari-Angle Touchscreen Lcd With 1.62M Dots,Video: 4K Uhd At 60P, 10-Bit 4:2:2, Connectivity: Wi-Fi, Bluetooth, Uvc/Uac For Webcam Use Lens Format: Full-Frame,Focal Length: 24–105Mm,Aperture: F/4–7.1,Image Stabilization: Up To 5 Stops,Autofocus: Stm Stepping Motor For Smooth And Quiet Focusing,Macro Capabilities: Center Focus Macro With 0.5X Magnification,Minimum Focusing Distance: 0.66 Ft (0.20 M) In Autofocus; 0.43 Ft (0.13 M) In Macro Mode,Filter Size: 67 Mm , Dual-Channel Wireless Microphone System System Type: Dual-Channel Wireless Microphone System With One Receiver And Two Transmitters. Microphone Type: Built-In Omnidirectional Microphones In Each Transmitter; Supports External Lavalier Microphones Via 3.5Mm Trs Input. Transmission Technology: Series Iv 2.4Ghz Digital Transmission With 128-Bit Encryption. Transmission Range: Up To 200 Meters (Line Of Sight). Frequency Response: 50Hz – 20Khz. Maximum Spl: 100 Db Spl (1Khz @ 1M). Battery Life: Up To 7 Hours On A Full Charge. Charging Port: Usb Type-C. , Wireless Connectivity- Wifi Routers Wifi Routers- Tplink Archer C6 Dual Band Router,Dual-Band Wi-Fi: Supports Both 2.4 Ghz And 5 Ghz Frequencies , All In One Pcs Preffered Make: Hp / Dell /Lenovo I5- 13Th Gen 1355U Or Above,8 Gb ,512 Gb ,23.8 Diagonal, Fhd (1920 X 1080), Ips, Anti-Glare, Wled-Backlit, 250 Nits, 72% Ntsc,Win 11 Pro,Intel® Uhd Graphics; Intel® Iris® X? Graphics; Intel® Graphics,Wired,Microsoft Office 21 Or Above 3 -Years , Video Camcorder- Preffered Make:Canon, Sony 4K Uhd Recording,1/2.3 Cmos Sensor,Digic Dv 6,Mp4 And Xf-Avc (Mxf),4K Uhd (3840 X 2160) At Up To 30 Fps,Full Hd 1080P At Up To 60 Fpsuhd 4K Camcorder, Xf-Avc: Up To 160 Mbps,Mp4: Up To 150 Mbps,Iso/Gain: 0 To 24 Db,F/1.8 To F/2.8,Up To 800X,5-Axis Dynamic Is (Optical + Digital),2 X Xlr Terminals (With Phantom Power),3.5Mm Stereo Mini-Jack,16-Bit/48Khz Linear Pcm And Aac,Headphone Output, Lcd Screen,Touchscreen, Usb-C: Supports Uvc For Livestreaming,Hdmi Output: Mini-Hdmi 2.0, Recording Media: Dual Sd/Sdhc/Sdxc Uhs-I Slotsheavy Duty Tripod Stand For Video Camera , Drone- Weight: < 249 G Flight Time: Min 34–45 Minutes Camera: 1/1.3 Cmos, 48 Mp, 24 Mm F/1.7 Lens Video: 4K Up To 100 Fps, 1080P Slow-Motion Up To 200 Fps, 150 Mbps Bitrate Photo Formats: Jpeg, Raw (Dng) | Video Formats: Mp4, H.264/H.265, Supports Vertical Video Capture, Panorama Modes: Sphere, 180°, Wide Angle, Vertical, Remote Controller- 5.5-Inch Fhd Screen With A Resolution Of 1920×1080 Pixels, 60Hz Refresh Rate, And 700 Nits Brightness. Supports 10-Point Multi-Touch,Up To 1080P/60Fps Live Feed When The Aircraft Is In Photo Or Video Mode,4 Antennas, 2T4r (Two Transmitters, Four Receivers), Two Built-In Antennas And Two External Antennas With Manual Angle Adjustments For Optimal Video Transmission,Supports Quick Charging , Copier Machine: Preffered Make: Canon, Xerox, Ricoh Main Unit -Machine Type-A3 Monochrome Laser Multifunctional; Core Functions-Print, Copy, Scan, Send And Optional Fax; Processor Speed 1.6Ghz Dual Core Processor; Control Panel Standard: 7 Inch Tft Lcd Wvga Colour Touch Panel; Memory Standard: 2.0Gb Ram; Storage Standard: 64Gb Emmc,Optional: 256Gb Ssd; Interface Connection- Network Standard: 1000Base-T/100Base-Tx/10-Base-T, Wireless Lan (Ieee 802.11 B/G/N), Wi-Fi Direct Connection Others Standard: Usb 2.0 (Host) X2, Usb 2.0 (Device) X1; Paper Input (Standard); Paper Supply Capacity (A4, 80 Gsm)-Standard: 1,200 Sheets Maximum: 2,300 Sheets (With Cassette Feeding Unit-Aw1); Paper Output Capacity (A4, 80 Gsm)-Standard: 250 Sheets Maximum: 645 Sheets (With Inner Finisher-L1 And Copy Tray-T2); Finishing Capabilities -Collate, Group, Offset, Staple, Hole Punch, Eco Staple, Staple On Demand; Supported Media Types- Main Body Cassette (Upper/Lower): Thin, Plain, Recycled, Color, Heavy, Bond, Pre-Punched, Letterhead, Postcard Multi-Purpose Tray:Thin, Plain, Recycled, Color, Heavy2, Bond, Pre-Punched, Letterhead, Postcard, Labels, Coated, Tracing;Supported Media Sizes-Upper Cassette: Standard Size: A4, A5, A5r, A6r, B5custom Size: 105.0 X 148.0 Mm To 297.0 X 215.9 Mm Lower Cassette: Standard Size: A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r, Com 10 No. 10*, Monarch*, Dl* Custom Size: 105 X 148 Mm To 304.8 X 457.2 Mm; Supported Media Weights -Main Body Cassette (Upper/Lower): 52 To 256 Gsm Multi-Purpose Tray: 52 To 300 Gsm Duplex: 52 To 220 Gsm; Warm-Up Time -4 Seconds Or Less From Sleep Mode: 10 Seconds Or Less From Power On: 10 Seconds Or Less; Dimensions (W X D X H)- 565 X 687 X 891 Mm; Installation Space (W X D)-1,286 X 1,116 Mm (With Dadf-Ba1 + Inner Finisher Tray Max Extended + Copy Tray-T2 Max Extended + Paper Cassette Opened; Weight -Approx. 66 Kg Print Specifications-Print Speed:Up To 45 Ppm (A4, A5, A5r, A6r), Up To 22 Ppm (A3), Up To 32 Ppm (A4r),Print Resolution (Dpi):Up To 1200 X 1200;Page Description Languages;Standard: Ufrii, Pcl6, Optional: Adobe Postscript 3Tm; Double-Sided Printing: Yes; Direct Print: Pdf, Eps, Tiff/Jpeg, Xps; Mobile / Cloud Printing: Airprint, Mopria, Canon Print Business, Uniflow Online And Universal Print By Microsoft; Fonts : Ps Fonts: 136 Roman Pcl Fonts: 93 Roman, 10 Bitmap Fonts, 2 Ocr Fonts, Andalé Mono Wt J/K/S/T (Japanese, Korean, Simplified And Traditional Chinese) , Barcode Fonts Print Features: Secure Print, Secure Watermark, Header/Footer, Page Layout, Duplex Printing, Mixed Paper Sizes/ Orientations, Toner Reduction, Poster Printing, Forced Hold Printing, Print Date, Scheduled Printing, Printing Using A Virtual Printer Operating Systems :Ufrii: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022, Mac Os X (10.13 Or Later) Pcl: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022 Ps: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022, Mac Os X (10.13 Or Later) Ppd: Windows 10/11, Mac Os X (10.13 Or Later) Copy Specifications :Copy Speed Up To 45 Ppm (A4, A5, A5r, A6r), Up To 22 Ppm (A3), Up To 32 Ppm (A4r),First-Copy-Out Time:5.3 Seconds; Copy Resolution (Dpi):600 X 600; Multiple Copies: Up To 999 Copies; Copy Density: Automatic Or Manual (9 Levels); Magnification:25% - 400% (1% Increments); Preset Reductions: 25%, 50%, 70%, 100% (1:1), 141%, 200%, 400%; Preset Enlargements:25%, 50%, 70%, 100% (1:1), 141%, 200%, 400%; Basic Copy Features: Preset R/E Ratios By Area, Two-Sided, Density Adjustment, Original Type Selection, Interrupt Mode, Book To Two Pages, Two-Sided Original, Sort, Job Build, N On 1, Different Size Originals, Sharpness, Erase Frame, Copy Id Card, Skip Blank Pages, Free Size Original, Color Mode, Reserved Copy, Copy Sample; Scan Specifications:Type: Color Scanner; Pull Scan Specifications: Colour Network Scangear2. For Both Twain And Wia Supported Os: Windows 10/11/Server2012/Server2012 R2/Server 2016/Server 2019/Server2022; Scan Resolution (Dpi): Scan For Copy: 600 X 600 Scan For Send: (Push) 600 X 600 (Smb/Ftp/Webdav/Ifax), (Pull) 600 X 600 Scan For Fax: 600 X 600; Document Feeder Paper Capacity (80 Gsm): Up To 100 Sheets; Acceptable Originals/Weights: Platen: Sheet, Book, 3-Dimensional Objects Document Feeder Sheet Media Weight : 1-Sided Scanning: 38 To 128 Gsm (Bw), 64 To 128 Gsm (Cl) 2-Sided Scanning: 50 To 128 Gsm (Bw), 64 To 128 Gsm (Cl); Supported Media Sizes: Platen: Max. Scanning Size: 297.0 X 431.8 Mm Dadf: A3, A4, A4r, A5, A5r, B4, B5, B5r, B6, Custom Size: 139.7 X 128.0 Mm To 297.0 X 431.8 Mm; Scan Method:Push Scan, Pull Scan, Scan To Network, Scan To Usb Memory Key, Scan To Mobile Device, Scan To Cloud-Based Services (Uniflow Online); Scan Speed:1-Sided Scanning: 70/70 (300 X 300 Dpi, Send), 51 /51 (600 X 600 Dpi, Copy) 2-Sided Scanning: 35/35 (300 X 300 Dpi, Send), 25.5 /25.5 (600 X 600 Dpi, Copy); Double-Sided Scanning: Yes;Supported Media Sizes: Platen: Max. Scanning Size: 297.0 X 431.8 Mm Dadf: A3, A4, A4r, A5, A5r, B4, B5, B5r, B6, Custom Size: 139.7 X 128.0 Mm To 297.0 X 431.8 Mm; Scan Method:Push Scan, Pull Scan, Scan To Network, Scan To Usb Memory Key, Scan To Mobile Device, Scan To Cloud-Based Services (Uniflow Online); Scan Speed:1-Sided Scanning: 70/70 (300 X 300 Dpi, Send), 51 /51 (600 X 600 Dpi, Copy) 2-Sided Scanning: 35/35 (300 X 300 Dpi, Send), 25.5 /25.5 (600 X 600 Dpi, Copy); Double-Sided Scanning: Yes; Send Specifications- Optional / Standard-Destination: Standard: E-Mail/Internet Fax (Smtp), Smb3.1.1, Ftp, Webdav,Optional: Super G3 Fax;Address Book / Speed Dials: Ldap (2,000)/ Local (1,600) /Speed Dial (200); Send Resolution (Dpi):Push: Up To 600 X 600 Pull: Up To 600 X 600; Communication Protocol: Ftp (Tcp/Ip), Smb3.1.1 (Tcp/Ip), Webdav Email/Ifax: Smtp(Send), Pop3(Receive); File Format: Standard: Tiff (Mmr), Jpeg Pdf (Compact, Searchable, Pdf/A-1B, Encrypted), Xps(Compact, Searchable), Pdf/Xps (Device Signature, Office Open Xml (Powerpoint, Word) Optional: Pdf (Trace & Smooth), Pdf/Xps (User Signature); Universal Send Features:Original Type Selection, Two-Sided Original, Book To Two Pages, Different-Size Originals, Density Adjustment, Sharpness, Erase Frame, Job Build, Delayed Send, Preview, Job Done Notice, File Name, Subject/Message, Reply-To, E-Mail Priority, Tx Report, Original Content Orientation; Fax Specifications- Optional; Modem Speed: Super G3: 33.6 Kbps G3: 14.4 Kbps; Compression Method: Mh, Mr, Mmr, Jbig; Resolution (Dpi):200X100dpi (Standard), 200X200dpi (Fine), 200X400 Dpi (Super Fine), 400X400 Dpi (Ultra Fine); Sending/Receiving Size: Sending: A3, A4, A4r, A5*1, A5r*1, B4, B5*2, B5r*1 Receiving: A3, A4, A4r, A5r, B4, B5, B5r *1 Sent As A4. *2 Sent As B4 Short.; Fax Memory: Up To 30,000 Pages (2,000 Jobs); Fax Features:Senders Name (Tti), Selecting The Telephone Line (When Sending Fax), Direct Send, Delayed Send, Preview, Finished Stamp, Job Done Notice, Tx Report, Interrupt Transmission, Sequential Broadcasting, Password/Sub-Address Sending, Confidential Mailbox Store Specifications- Memory Media: Standard: Usb Memory, Security Specifications; Authentication & Access Control: User Authentication(Picture Login, Picture And Pin Login, Username And Password Login, Function Level Login, Mobile Login), Department Id Authentication(Depertment Id And Pin Login, Function Level Login), Uniflow Online (Pin Login, Picture Login, Picture And Pin Login, Card Login, Card And Pin Login, Username And Password Login, Depertment Id And Pin Login, Function Level Login), Access Management System(Access Control);Network Security:Tls 1.3, Ipsec, Ieee802.1X Authentication, Snmpv3, Firewall, Functionality(Ip/Mac Address Filtering), Wpa3 Support (Wi-Fi), Dual Network Support(Wired Lan/Wireless Lan, Wired Lan/Wired Lan), Enabling/Disabling(Network Applications, Remote Ui, Usb Interface), G3 Fax Separation From Lan, Usb Port Separation From Lan, Scan And Send -Virus Concerns For E-Mail Reception Document Security -Print Security(Secure Print, Encrypted Secureprint, Forced Hold Printing, Uniflow Secure Print 1),Receive Data Security(Confidential Fax Inbox Forwarding Received Documents Automatically), Scan Security (Encrypted Pdf, Device Signature Pdf/Xps, User Signature Pdf/Xps112), Send Data Security(Setting For Requesting Password Input Per Transmission, Restricted E-Mail/File Send Functions, Confirming Fax Number, Allow/Restrict Fax Driver Transmissions, Allow/Restrict Sending From History, S/Mime Support) Environmental Specifications- Operating Environment: Temperature: 10 To 30 °C (50 To 86 °F);Humidity: 20 To 80 % Rh (Relative Humidity); Power Source: Eur: 220-240V 50/60Hz 10A; Power Consumption: Maximum: Approx. 1,500W,Copying (With Dadf Continuous Scan): Approx. 666W (220-240V)*1,Standby: Approx. 28.1W (220-240V)*1,Sleep Mode: Approx. 0.8W*2,* 0.8W Is Not Available In All Circumstances Due To Certain Settings.,*1 Reference Value: Measured One Unit,*2 0.8W Is Not Available In All Circumstances Due To Certain Settings.,Typical Electricity Consumption (Tec): 0.48 Kwh*,*As Per Energy Star Version 3.0 Software & Printer Management- Tracking & Reporting: Uniflow Online; Remote Management Tools: Iw Enterprise Management Console Emaintenance Content Delivery System; Scanning Software: Network Scangear;Toner Cartridge/S: Toner C-Exv 67 Black; Toner Estimated Yield:33,000 Pages (A4), (Estimated @ 6% Coverage); Cassette Feeding Unit:Cassette Feeding Unit-Aw1: Paper Capacity: 550 Sheets X 2 (1,100 Sheets) (80 Gsm), Paper Type: Thin, Plain, Recycled, Color, Heavy, Bond, Transparency, Pre-Punched, Letterhead Paper Size: A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r,Custom Size: 105.0 X 148.0 Mm To 304.8 X 457.2 Mm,Paper Weight: 52 To 256 Gsm,Power Source: From The Main Unit Dimensions (W X D X H): 565 X 635 X 248 Mm,Weight: Approx. 16.0 Kg Output Options- Copy Tray: Check For Impacted Products.; Copy Tray:Inner 2Way Tray-M1:Tray Capacity (With 80 Gsm Paper):Upper Tray: Sra3, A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r: 100 Sheets,Lower Tray (Standard Tray): A4, A5, A5r, A6r, B5, B5r: Up To 250 Sheets,Sra3, A3, A4r, B4: Up To 100 Sheets Paper Weight: 52 To 300 Gsm, Dimensions (W X D X H): 428 X 405 X 88 Mm,Weight: Approx. 0.7 Kg, Inner 2-Way Tray-Copy Tray-T2:Capacity (80Gsm Paper):A4, A5r, B5, B5r: 100 Sheets,A3, A4r, B4: 65 Sheets,Dimensions (W X D X H): 444 × 373 × 176 Mm (Attached To The Main Unit, When The Extension Tray Is Extended),Weight: 0.5 Kg, Inner Finisher - Inner Finisher-L1:Upper Tray: Sra3, A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r: Approx. 45 Sheets,Lower Tray: A4, A5, A5r, B5: Approx. 500 Sheets Sra3, A3, A4r, B4, B5r: 250 Sheets,A6r: 30 Sheets,Envelope: 10 Sheets Paper Weight: 52 To 300 Gsm,Staple Position: Corner, Double,Staple Capacity: A4, B5: 50 Sheets (52 To 90 Gsm),A4r: 40 Sheets (52 To 90 Gsm),A3, B4: 30 Sheets (52 To 90 Gsm),Eco Staple: A3, A4, B4, B5: 10 Sheets (52 To 64 Gsm)/8 Sheets (65 To 81.4 Gsm)/6 Sheets (82 To 105 Gsm),Staple On Demand: Approx. 40 Sheets (80 Gsm) Dimensions (W X D X H): 727 × 525 × 225 Mm (Attached To The Main Unit, When The Extension Tray Is Extended),Weight: Approx. 9.1 Kg Hardware Accessories- Card Readers: Ic Card Reader Attachment-B4 Attachment Kit For Reader-A2; Print Accessories- Pcl International Font Set-A Ps Printer Kit-Bt1; Send Options: Universal Send Trace & Smooth Pdf Kit-A1 Universal Send Digital User Signature Kit-C1; Barcode Printing: Barcode Printing Kit-D1; , Audio Accessories-Ahuja Wired Mikes , Audio Accessories-Ahuja Cordless Mikes , Audio Accessories-Mike Stand (Tall And Small), , Audio Accessories-Cordless Mike Holder Cap, , Audio Accessories-Wired Mike Holder Cap , Audio Accessories-Jack To Jack Wired , Audio Accessories-3 Pin Xlr Male To Xlr Female , Audio Accessories-Universal Aaa And Aa Battery Recharger Adapter , Audio Accessories-Aa Recharge Batteries, Aaa Recharge Batteries , Audio Accessories-Mains Power Cable Cords
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Private Organizations No of Bidders 3
Goa View Result →
8.
Educational and Research Institute #10734365 AOC
Notice Inviting Etender For Procurement Of Equipment, Instruments, Machineries, Tools Charts Etc. Related To Laboratories And Workshop Of Engineering Institute For Junior Executives, Dalalpukur, Howrah-711104-1 Dead Weight Pressure Gauge Tester • Bourdon Tube Pressure Gauge As Manometer • Manometer With Transparent Scale • Manufactured From Corrosion Resistant Materials • Components Arranged On Base Plate. • Set Of Weights • Medium For Transmitting Pressure: Hydraulic • Capacity Of 25Kg / Cm2 • The System Is Nickel Chrome • The Weights Are Zink Iron ) 2 Cut Section Model Of Hermetically Sealed Compressor 3 Universal Bevel Protractor ( Accuracy: 0.01 Mm Material: Stainless Steel Diameter: 70 Mm Size: 300 Mm Type: Analog Graduation 5 Min Straightness .00016+ ( .00005Xl / 2 ) ) 4 Cut Section Model Of Lamont Boiler 5 Slip Gauge Set; Special Set ( M87 ) , Grade I, High Grade Steel, 9 Mm Wide & 30-35 Mm Long Cross Section. 6 Utm Machine ( Material:Ms Voltage:220 V Phase: Single Phase Capacity: 10 To 100 Ton Cross Travel: Up To 1000 Mm Weight: 1500 Kg ) 7 Mollier Chart Flex ( 40 × 30 ) 8 Teak Wood; Wood For Pattern Shop Size: 2×1×6 9 Thermal Conductivity Of Metal Rod; • Frame: Made Of M.S. Square Tubes & Sheets, Welded & Powder Coated • Optional Accessories: Rotameter For Water Flow Measurement • Electric Heater : Clamp Heater, Capacity 200 W, Supply 230 V Ac • Insulation Jacket: Made Of Mild Steel, Mild Steel Rod Is Insulated By Asbestos Powder • Diameter Of Metal Rod 25 Mm, Length Of Rod 300 Mm 10 Cut Section Model Of Screw Type Rotary Air Compressor 11.01 Chart Of Velox Boiler With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.02 Chart Of Mollier Diagram With Labelling ( Size: 23’’ X 36’’, Material: Pvc, With Roller ) 11.03 Chart Of T-T-T Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.04 Chart Of Utm Machine & Sample With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.05 Chart Of Torsion Testing Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.06 Chart Of Iron-Carbon Equilibrium Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.07 Chart Of Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.08 Chart Of Vernier Height Gauge With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.09 Chart Of Thread Measurement With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.10 Chart Of Gear Tooth Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.11 Chart Of Hermetically Sealed Compressor With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.12 Chart Of Domestic Refrigerator With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.13 Chart Of Full Pressure Engine Lubricating System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.14 Chart Of Constant Mesh Gear Box With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.15 Chart Of Synchromesh Gear Box With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.16 Chart Of Components Of A Chasis With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.17 Chart Of Knuckel Joint With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.18 Chart Of Intersection Of A Prism And Cone ( Size:30× 40, Material: Pvc, With Roller ) 11.19 Chart Of Projection Of A Straight Line In Different Quadrants ( Size:30× 40, Material: Pvc, With Roller ) 11.20 Chart Of Plummer Block - Details And Arrangement ( Size:30× 40, Material: Pvc, With Roller ) 11.21 Chart Of Centrifugal Pump With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.22 Chart Of Balanced Type Vane Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.23 Chart Of Bent Axis Piston Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.24 Chart Of Lathe Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.25 Chart Of Single Point Cutting Tool Geometry With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.26 Chart Of Screw Jack Assembly With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.27 Chart Of Cotter Joint Assembly And Design With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.28 Chart Of Vertical Drilling Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.29 Chart Of Shaper Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.30 Chart Of Safety On A Lathe Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.31 Chart Of Safety On A Milling Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.32 Chart Of Safety On A Shaper Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.33 Chart Of Safety In Carpentry Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.34 Chart Of Safety In Fitting Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.35 Chart Of General Precaution In Workshop ( Size:30× 40, Material: Pvc, With Roller ) 11.36 Chart Of Cnc Turning With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.37 Chart Of Elements Of Jigs ( Drill Bushes ) With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.38 Chart Of Tig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.39 Chart Of Mig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.40 Chart Of Engine Cooling System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 12 Digital Lab Trainer ( Bread Board Model ) ( Built-In Dc Regulated Power Supply; At Least 8 Logic Input Switches; At Least8 Output Led; Pulse Generator For Clock Frequency ; Patch Chords ) 13 Arduino Uno Board ( Atmega328 ) 14 Experimental Kit To Study Pam, Pwm And Ppm Modulation And Demodulation ( Pulse Generator With Variable Frequency And Amplitude, Pam Modulator And Demodulator, Pwm Modulator And Demodulator, Ppm Modulator And Demodulator ) 15 Ujt Trainer Kit With P.S. & Patch Cord 16 Led Colour Tv Demonstration Kit ( Display Type: Led, Hd: Screen Size: 24: Connectivity: Usb, Hdmi, Av: Test Points To Be Present Minimum 10 Nos.: Switched Faults To Be Provided: Product Tutorial Should Be Present ) 17 Microwave Oven Demonstration Trainer Kit ( Type: Solo: Capacity: 17 Ltr.: Control Type:Mechanical: All Circuits & Panels To Be Mounted On-Board: Test Points To Be Provided To Analyze Signals: Instruction Manual To Be Provided ) 18 Washing Machine Demonstration Trainer Kit ( Application: Lab Experiment: Semi-Automatic: Tank Capacity: 6.5 Kg: Block Diagram & Circuit Diagram To Be Mounted On The Lid: Test Points To Be Provided ) 19 Mobile Communication Trainer Kit To Study Various Signalling And Fault Insertion Techniques ( Gsm Handset Trainer Kit.  Operate Both On Windows And Linux Platform  Usb Interface For Communication  Best Suitable For Iot Gateway Application  External Connector To Interface With Any Microcontroller  Easy Understanding Of At Commands  Real Time Operation  Built In Network Status Led  Audio Interface Connector  Simple / Easy Operation  External Antenna  Application Module Relay Interface For Ac Device ( Optional ) ) 20 Trainer Kit For Mobilephone Set To Study Transmitter And Receiver Sections In Mobile Handset And Measure Frequency Band Signal ( Real Time Mobile Operation # Full Understanding Of Mobile Phone Working # Frequency Measurement And Band Verification # Provides Study Of All Sections In Mobile Phone # Tx / Rx Frequency Measurement # 3G / 4G Technology And Gmsk Signals # Gsm Data Rate # Detail Study Of User Interface Control Signals # Detail Study Of Sim Operation # Battery Identification And Charging Study  Switched Faults 21 Consumable ( 9V Battery, Cro Probe, Digital Ics ) 22 Cro ( 20 Mhz , Dual Trace, Dual Channel ) 23 Trainer Kit For Mobile Phone ( Features : The Experimental Kit Will Be Capable I ) To Study General Block Diagram Of A Mobile Phone. Ii ) To Study Mobile Transmission Section. Iii ) To Study Mobile Reception Section. Iv ) To Study Different Nos. Of Faults Provided With The Trainer. V ) To Study & Observe Voltages / Waveforms Of Each Test Points. Vi ) To Study Mobile Charging Circuits. Vii ) To Use Mobile Phone As Modem For Using At Commands As Given; A ) Sending Text Messages, Read / Delete Massages Etc. B ) Calling To A No, Reject / Accept The Incoming Calls Etc. C ) Gprs Related Commands. Study Of Bluetooth Technology & Connection With Other Bt Devices. Bluetooth Profiles : Bip, Bpp, Dunp, Ftp, Hid, Opp , Sap, A2dp, Pbap, Spp Etc. To Study General Idea Of Sim Card. ( Local Sim Card Must Be Inserted By The User At The Time Of Experiment ) . ) 24 Salt Bath Furnace For Heat Treatment ( • Resistance Heating ( Element ) • Operating Temp.: Up To 1200°C • Digital Temp. Controller ( Pid ) • Chamber Size : 450Mm X 300 Mm X 300 Mm • Furnace Uniformity + / - 2°C • Temp Recorder With 2 Channel Placed At Opposite Sides • Salt For Use With Two Times Top Up • Spare Heating Element 2Pc ) 25 In-Situ Metallography Kit ( • Items: Portable Grinder / Polisher, Grinding Discs, Lapping Cloths, Diamond Pastes, Aerosol Spray, Replication Film, Paste, Reflector And Gumming Tape For Excellent Contrast Or Transparent Replica - Film Thickness - 125 Microns, 30 Microns, Replica Liquid, Glass Slides ) 26 Automatic Electrolytic Polishing Machine ( • Function: Fully Automatic Electrolytic Polishing And Etching With Automatic Scanning Function • Preparation Time: Within 30 Sec • Electrolyte For Low / High Alloyed Steels & Aluminium • Pump And Magnetic Stirrer • Integrated Cooling System ) 27 Micro-Hardness Tester ( • Test Load : 10, 25, 50, 100, 200, 300, 500, 1000 Gm • Scale: Knoop & Vickers • Dwell Time: 5-90 Seconds Settable • Objectives : 10X, 20X, 40X, 60X • Loading And Unloading : Motorized • Measurement – Automatic And Or With Manual Micrometer Eyepiece. • Traverse: Automatic And Or Manual With Micrometer. • Focusing - Motorized Focusing With Manual Over-Ride • Computerized Imaging Attachment, Dedicated Software To Measure Hardness On Computer With Report Generation Facility • Accessories: Sheet Holder, Wire Holder, Hardness Test Block, Bulb, Indenter. ) 28 Cracked Aluminum Test Block ( For Penetrant Sensitivity Checking In Dpt ) ( Aluminum Test Piece That Measures 3 X 2 X 3 / 8 With A 1 / 8 Wide With A Milled Notch That Separates The Blocks Two Sides To Facilitate Side-By-Side Penetrant Comparison. The Test Block Is Used To Check The Strength Of “In-Use” Penetrants. This Is Done By Processing One Half Of The Block With “Used” Penetrant, And The Other Half With Fresh Penetrant. Can Be Used To Compare Sensitivity Of Different Penetrants Or Sensitivity Of New And Old Penetrants. Complies With Astm E165 And Asme Boiler And Pressure Vessel Code Section V & Iii, And Mil-I-23135-C. ) 29 Pie Gauge / Magnetic Flux Indicator ( To Be Made From Eight Ferrous Segments, Braised Into A Single Piece, Providing A Star Pattern Of Nonferrous Discontinuities. Eight Linear Discontinuities To Provide Indications In All Directions Non-Ferrous Handle With Pivot. Specification Compliance • Mil-Std-271 • Astm E709 ) 30 20Mhz Analog Cro ( Dual Trace ) , Bandwidth:- Dc ~ 20Mhz ( -3Db ) Y Deflection:- 5Mv / Div ~ 10V / Div. Rise Time:- <18Ns，Mag _70Ns ：17.5Ns. Max Input:- 400V ( Dc+Acp-P ) 31 50Mhz Digital Storage Oscilloscope, Bandwidth 50Mhzreal-Time Sampling Rate 500 Msa / S, Equivalent Sampling Rate 50Gsa / S.Memory Depth: 32Kptstrigger Types: Edge, Pulse Width, Video, Slope, Alternativeunique Digital Filter Function And Waveform Recorder Function, Max Input:- 400V ( Dc+Acp-P ) 32 3D Model Showing Different Parts Of A Coal Fired Thermal Power Station 33 3D Model Showing Different Parts Of A Gas Fired Thermal Power Station 34 3D Model Showing Different Parts Of A Diesel Power Station 35 3D Model Showing Different Parts Of A Nuclear Power Station 36 3D Model Showing Different Parts Of A Hydro-Electric Power Station 37 3D Model Of Boiler Showing Its Different Parts Used In Coal Fired Thermal Power Station 38 3D Model Of Boiler Showing Its Different Parts Used In Nuclear Power Station 39 3D Model Of Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant 40.1 Colour Flex Chart Describing Different Parts Of A Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.2 Colour Flex Chart Describing Different Parts Of A Gas Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.3 Colour Flex Chart Describing Different Parts Of A Diesel Power Station Size:30× 40, Material: Pvc, With Roller 40.4 Colour Flex Chart Describing Different Parts Of A Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.5 Colour Flex Chart Describing Different Parts Of A Hydro-Electric Power Station Size:30× 40, Material: Pvc, With Roller 40.6 Colour Flex Chart Describing Different Parts Of Boiler, Used In Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.7 Colour Flex Chart Describing Different Parts Of Boiler, Used In Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.8 Colour Flex Chart Describing Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant Size:30× 40, Material: Pvc, With Roller 41 3-Phase Induction Motor Speed Control Using Pwm Inverter For Interpreting Speed-Torque Characteristics Using Vvvf Drive 42 Ups Trainer Kit ( 1Kva ) Output Voltage : 230 V Ac Nominal, Input Voltage : +12V Dc Battery. Capacity : 1Kva, Output Frequency : 50 Hz Accuracy : + 5%. Switching : Automatic. 43 Smps Trainer Kit Incl. ±5V, ±12V Input Voltage: Ac 100 – 264V 50 / 60Hz Output Voltage: 12V Dc, 0-5A Output Voltage: Adjustment Range: ±20% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal Ac Input / Full Range 100% Full Load Burn-In Test Cooling By Free Air Convection High Quality And High Performance Led Power Supply With A Metal Body For Hidden Installation For Led Lighting Design With Built-In Emi Filter, Improve Signal Precision. Certifications: Ce & Rohs No Minimum Load. Compact Size Light Weight. High Efficiency, Reliabiltiy & Low Energy Consumption Controller: Satandard 44 Commutation Kit Of Scr ( Class A To F ) Completely Self – Contained Stand – Alone Unit. Demonstrates The Principle And Various Methods Of Forced Commutation Of Scr. 1. Self-Commutation By Resonating Load ( Class “A” Method ) . 2. Self-Commutation By An L C Circuit ( Class “B” Method ) . 3. Complimentary Commutation ( Class “C” Method ) . 4. Auxiliary Commutation ( Class “D” Method ) . 5. External Pulse Commutation ( Class “E” Method ) . * Supply Required 230V, 50Hz Ac. * Built-In Ic Based Dc Regulated Supply And Led Indication For Supply “On”. * Built-In Load Facility In The Form Of Led’S. * Connecting Each Circuit Separately And Verifying Its Principle. * Multicoloured Test Points Are Provided To Observe The Waveform And Voltages. * Set Of Required Number Of Patch Cords. * Housed In An Elegant Cabinet With A Well Spread Intelligently Designed Circuit Layout Engraved On The Front Panel. * Strongly Supported By A Comprehensive Instruction Manual Complete With Theory And Operating Details. 45 Colour Flex Chart Describing Single Line Diagram Of A Given Distribution System ( Lt & Ht ) Size:30× 40, Material: Pvc, With Roller 46 Colour Flex Chart Describing Short Transmission Line ( 220Kv ) Size:30× 40, Material: Pvc, With Roller 47 Colour Flex Chart Describing Medium Transmission Line ( 220Kv ) ( Both T & Π-Model ) Size:30× 40, Material: Pvc, With Roller 48 Power Factor Improvement Kit Using Static Condenser Including Load R-L Load Of At Least 2Kva With Appropriate Capacitor Bank. 49 Setup For Load Test On 1-Ph Induction Motor: Load Test Kit Of 1-Ph Induction Motor ( 1Hp, 230V, 50Hz ) 50 Loading Test Kit Of 3-Phase Alternator: ( 2Kw, 415V, 50Hz ) With 3-Ph R-L Load Box Coupled To A Dc Motor; Capable To Perform As Synchronous Motor Test With Dc Generator Load; Integrated With All Required Measuring Instruments 51 Speed Control Kit Of Stepper Motor Including Reversing Arrangement With 8051 Microcontroller: Stepper Motor Of Appropriate Capacity To Be Served By 8051Μc 52 Speed Control Kit Of Ac Servo Motor: Motor Spec: 3000Rpm, 200W, 0-240V, Control Torque: Standard With All Needed Accessories 53 Speed Control Kit Of Dc Servo Motor: •Voltmeter Vdc 3.5 Digit. 200Mv •Rpm Indicator For Speed Measurement •Voltmeter Vdc 3.5 Digit 20V Power Supply: •Ic Regulation In Controller Circuit Power Supplies •Operated On Mains Power 230V, 50Hz +10% Features: •Position Control Of A 12 Volt, 1 Amp Dc Geared Pm Motor ( 50 / 60 Rpm ) •Calibrated Dials With 1 Degree Resolution For Reference And Output Position •Two 360 Degree Servo-Potentiometers •Built In Step Signal •Built In Waveform Capture / Display Card For Study Dynamic •Electronic Techogenerator For Feedback •Non-Contact Eddy Current Break For Load •Speed Control Of 12V, 4W, Permanent Magnet Dc Motor •Speed Range Up To 3000 Rpm ( Typical 54 Mcb Test Kit For Performing Load Test: Kit Should Be Able To Perform Short-Circuit, Over Load, Thermal Trip Test For Mcb With Rating Upto 30A 55 Dismantled Elcb & Rccb Kit For Demonstration Purpose: Elcb: Single Phase 2 Pole Elcb, Rccb, Isi Marked 32A Mcb With High Voltage, Overload Protection, Current 3 To 30 Ma Rccb: Breaking Capacity 10 Ka, Frequency, 50 Hz, Number Of Poles 2P, Operating Characteristics: Ac Rated Current 40 A, Sensitivity 30 Ma, Standard, Is 12640-1 & Iec 61008-4, Test Button Yes 56 Testing Kit For Percentage Differential Protection Of Transformer Using Transformer Differential Relay ( Electromagnetic / Μp Based / Static ) : Standard For Laboratory Purpose 57 Colour Flex Chart Describing Different Parts Of Acb & Vcb ( 33Kv, 15Mva ) : Size:30× 40, Material: Pvc, With Roller 58 Experiment Kit To Measure Solar Radiation Using Pyranometer On Tilted Surface At Different Angle Inclination: Standard For Laboratory Purpose 59 Colour Flex Chart Describing Different Parts Of Solar Flat Plate Collector & Solar Concentrating Collector & Trough Collector: Size:30× 40, Material: Pvc, With Roller 60 Experiment Kit To Measure Thermal Performance Of Solar Water Heating System: Standard For Laboratory Purpose 61 3D Model Describing Different Parts Of ( I ) Solar Street Lighting System & ( Ii ) 1Kw Small Wind Turbine ( Swt ) : 3D Model For Laboratory Purpose 62 Setup Of 250Wp Solar Pv Plant Including All Accessories: Solar Panel Specifications:Peak Power: 250W; Maximum Power Voltage: 20.2V; Maximum Power Current: 12.38A; Open Circuit Voltage: 23.9V; Short Circuit Current: 13.12A; Power Allowance Range: + / - 3% Hybrid Inverter Specifications: Nominal Battery Voltage: 12V; Continuous Power Output: 1000W / 1000Va; Surge Power: 2000Va Output Voltage: 230V Ac; Output Frequency: 50Hz / 60 Hz; Output Waveform: Pure Sine Wave; Maximum Solar Input Power: 600W; Maximum Open Circuit Solar Input Voltage: 55V; Maximum Solar Charging Current: 50A; Maximum Mains Ac Charging Current: 20A; Maximum Combined Charging Current: 50A; Peak Efficiency: 93% Battery Specifications ( Per Battery ) : Nominal Voltage: 12V; Nominal Capacity: 50Ah ( 10H Rate ) / 55Ah ( 20H Rate ) ; Maximum Charging Current: 25A; Self-Discharging Rate: <3% Per Month; Cycle Lifetime At 30% D.O.D.: 1000-1100 Pressure Control: Safety Valve Installed Terminal Type: F13 ( Bolts And Washers Included ) Operating Temperature: From +10C To +40C 63 Setup Of Small Wind Turbine Plant Including All Accessories: Standard For Laboratory Purpose 64 Study Kit Of Assembling And Dismantling Of Csp Plant Using Parabolic Trough Or Disc: Standard For Laboratory Purpose 65 Study Kit For Assembling Vertical Axis Or Horizontal Axis Swt: Standard For Laboratory Purpose 66 Digital Lcr Multimeter: Digital Lcr Meter ( Battery Operated ) , Model: 4070 Range: 0.1Μh To 20H, 0.1Pf To 2000Μf, 0.1Ohm To 20Mohm Accuracy: 2Mh, Resolution: 1Uh, Accuracy: 20Mh, Resolution: 10Uh, Accuracy: 200Mh, Resolution: 100Uh Accuracy: 2Nf, Resolution: 1Pf, Accuracy: 20Nf, Resolution: 10Pf, Accuracy: 200Nf, Resolution: 100Pf, Accuracy: 2Uf, Resolution: 1Nf, Accuracy: 200, Resolution: ± ( 0.8 Percent+5 ) 0.1, Accuracy: 2K, Resolution: 1, Accuracy: 20K, Resolution: 10, Accuracy: 200K ( Make: Metravi ) 67 Handheld Power Meter Or Power Analyzer With Socket: Voltage: 85V-265V, Current; 0.002A~20A, 50Hz, 1-Ph 68 Analog Power Factor Meter ( 1-Ph & 3-Ph ) : Standard For Laboratory Purpose 69 Multimeter With Clamp Meter Arrangement With Hfe Lcr: Standard For Laboratory Purpose ( Make: Metravi ) 70 Three Phase Power Measurement Kit ( Y & Δ Load R-L Load ) Incl. 3-Ph Wattmeter With 2Kw Range: Standard For Laboratory Purpose 71 Kit For Troubleshooting Single Phase Electronic Energy Meter: 230V, 1-Ph, 50Hz 72 Three Phase Trivector Meter: Salient Features Class 0.5S As Per Relevant Is And Iec Standards 5A Current Rating 3 Phase 4 Wire 4 Quadrant Measurement Anti-Tamper Features Self-Diagnostic Capability Multiple Tariff / Time Of Day Feature Bidirectional Energy Recording Up To 4 Maximum Demand Registers Load Survey ( Interval Data ) Features Up To 12 Reset Backups Optical Port / Rs 232 / Rs 485 / Ir / Irda / Rf ( 2.4 Ghz / 865-867 Mhz ) ( Optional ) ( Make: L&T ) 73 Brake Test Kit Of Dc Series Motor: 220V Dc, 2Hp With Allied Required Accessories 74 Back-To-Back Test Kit Of Single Phase Transformer: 1-Ph, 240V, 50Hz, 1Kva ( 2 Nos. ) Identical Transformers With Other Standard Accessories 75 Isolation Transformer Kit: 230V; 230V / 10Amp 230V; 230V / 5Amp 76 Pulse Transformer Kit: Dc Supply: Two 5V & 12V, Pulse Generator: Two Selectable Frequency & Variable Pulse Width, Mains: 230V / 50Hz, Adequate For Cro Observations, Optocoupler: One, One Ferrite Wired 1:1 77 Colour Flex Chart Describing Different Vector Groups Of Theree Phase Transformer: Size:30× 40, Material: Pvc, With Roller 78 Full-Wave Fully Controlled Bridge Rectifier Kit With & Witout Filter Arrangement: Standard For Laboratory Purpose 79 Kit To Find The Characteristics Of Zener Diode: Standard For Laboratory Purpose 80 Kit To Find The Characteristics Of Mosfet: Standard For Laboratory Purpose 81 Ujt Relaxation Oscillator Trainer Kit: Standard For Laboratory Purpose 82 Singlestatge Transistor Trainer Kit ( Ce-Mode ) : Standard For Laboratory Purpose 83 Trainer Kit For Sr, D, Jk & T – Flip-Flop: Standard For Laboratory Purpose 84 Trainer Kit For Realization Of Encoder And Decoder Circuit: Standard For Laboratory Purpose 85 Trainer Kit For Realization Of Multiplexer And Demultiplexer Circuit: Standard For Laboratory Purpose 86 Trainer Kit For Implementing Dac & Adc: Standard For Laboratory Purpose 87 Connector Cables For Ade Lab. Of Different Types: Standard For Laboratory Purpose 88 Arduino Uno R3 Board With Lcd1602, Servo Motor, Relayes, Processing And C Code, Beginner Starter Kit With Mannual And Allied Accessories: Standard For Laboratory Purpose 89 Trainer Kit For 8051 Μc Programming: Trainer Kit For 8051 Μc Programming With Keypad To Write Program 90 Trainer Kit Using 8051 Μc For Measurement Of Ac Voltage, Current, Frequency & Phase Angle Using Suitable Ct, Pt, Zcd, Adc, Etc. 91 Demonstration Kit For Identifying Pvc, Xlpe, Vir, Catenary, Frls, Frlsh Cables / Wires Of Different Current Rattings: Standard For Laboratory Purpose 92 Megger: Insulation Tester ( 500V ) With Hand-Driven Gen.: 500V, 2500 Mega Ohms 93 Megger: Insulation Tester ( 2500V ) With Hand-Driven Gen. 2.5Kv, 2500 Mega Ohms 94 3-Ph Smart Energy Meter For Lt Power Measurement, 3-Ph, 415V, 4-Wire, Kwh Meter, Current: 10-60A, Class 1.0 Accuracy As Per Relevant Is And Iec Standards, With Lcd Display [ Make: L&T ] 95 Trainer Kit For Dc Chopper Drive With Resistive Load & Dc Separately Excited Motor. 1 / 8 Hp, 200Vdc Operation, Current Limit Protection, Speed Control Using Frequency And Duty Cycle Variation, Jones Chopper Based Control, Motor Loading Arrangement Can Be Provided / Resistive Load May Be Connected, Other Variety Of Controllers With Converter Control With Closed Loop Controller 96 Trainer Kit For Controlling The Speed Of Separately Excited Dc Motor By Changing The Firing Angle Of Scr Using 1-Ph Full Converter. Power Supplies: • Power Supply +15Vat 150Ma • Isolated Supply 0-220V At 5A. • Operated On Mains Power 230V, 50Hz +10% Digital Meters: • Voltmeter 2000V Ac • Voltmeter 2000V Dc • Ammeter 2A Dc Components Are Mounted On The Panels Are: • Scr Tyn604 ( 2 Nos. ) • Diode 1N5408 ( 2Nos. ) • Diode Ba159 • Ac Phase Control By Gate Control Firing Circuit. • Snubber Circuit. Load: • 1 / 2Hp Dc Shunt Motor. • Inductor As Load 230V, 1A • Lamp Load 230V, 60W 97 Μcontroller Based 3-Ph Syn. Motor Drive: Trainer Kit For Controlling The Speed Of Synchronous Motor ( 1Kva ) Drive Using Μc. 98 Demonstartion Kit Showing Different Types Of Power Semiconductor Devices With Heat Shink E.G. Scr, Igbt, Gto, Mosfet, Standard For Laboratory Purpose. 99 Kit For Magnetic Control Of Im: Control And Power Circuit For ( I ) Forward And Reverse Rotation Of Squirrel Cage Im Using Contactor, ( Ii ) Automatic Star-Delta Starter Of Squirrel Cage Im, ( Iii ) Dynamic Braking Of Squirrel Cage Im, Standard For Laboratory Purpose. 100 Screw Driver Set, Standard For Laboratory Purpose. 101 6” Slide Range, Standard For Laboratory Purpose. 102 Wire Stripper, Standard For Laboratory Purpose. 103 Crimping Tool ( 1 Sq. Mm. To 6 Sq. Mm. ) . 104 2.5 Sq. Mm. Stranded Pvc Copper Wire 105 1.5 Sq. Mm. Stranded Pvc Copper Wire 106 1 Sq. Mm. Stranded Pvc Copper Wire 107 Soldering Kit: 20W With Solder Material 108 Contact Type Tachometer ( Range: 0-10, 000 Rpm ) 109 Set-Up With Different Type Tl Lamps ( Conventional & Led ) With Fittings Containing Electrimagnetic Ballast / Electronic Ballast Etc.: Tl Fittings With: 1. Electronic & Electromagnetic Ballast For ( I ) Single 40W, 240V, 50Hz Tl, ( Ii ) 2X40w, 240V, 50Hz Tl, 2. 20W Led Tl With Fittings Incl. 110 3-Ph Capacitor Bank Of 2-4Kva For Correcting Power Factor Of 415V, 50Hz, 1500 Rpm, 2Hp, 3-Ph Squirrel Cage Im With Facility To Connect The Stator Of The 3-Ph Im Both In Star & Delta Mode And A Tri-Vector Meter Having Facility To Measure Kw, Kva, Kwh, Kvarh, Pf. 111 Transformer Oil Breakdown Strength Kit: Breakdown Strength Kit With 5 Ltr. Fresh Transformer Oil, Standard For Laboratory Purpose. 112 Chart For Demonstration Of Different Fire Extinguishers: Colour Flex Chart Describing Different Types Of Fire Extinguishers ( 4 X 3 ) , Material: Pvc, With Roller 113 Chart For Demonstration Of Artificial Respiration ( Cpr ) And Prepare A Report.: Colour Flex Chart Describing Different Types Of Artificial Respiration ( Cpr ) ( 4 X 3 ) , Material: Pvc, With Roller.
Contract Date: Dec 10, 2024 Contract Value : ₹ 11.21 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
9.
Educational and Research Institute #10575911 Price Bid
Supply Of Coronary Engiography Kit And Its Related Consumables , Group A: Coronary Angiography ( Items Used In Cath Lab ) , ( A ) Angio Guidewire Hydrophylic 0.035 / 0.023 – J / 0.032 J-Tip 150 Cm - Us Fda And Japan Pmda And Dcgi Approved ( B ) Angio Guidewire Hydrophylic 0.035 / 0.023 – J / 0.032 J-Tip 260 Cm - Us Fda And Japan Pmda And Dcgi Approved , Angio Guidewire 0.035 – J / 0.032 J-Tip 150 Cm Translumina Or Equivalent , Angio. Cath. Al1 / Al2 / Al3 – 5F, 6F , Angio. Cath. Ar1 / Ar2 / Ar3 – 5F, 6F , Angio. Cath. Jl -3.0 / 3.5 / 4.0 / 4.5 / 5.0 ( 5F & 6F ) , Angio. Cath. Jr. 3.0 / 3.5 / 4.0 ( 5F & 6F ) , Angio. Cath. Pigtail 4F / 5F / 6F , Ima - 6F / 7F , Multipurpose6f, 7F , Peadiatric Input Sheath 4F / 5F , ( A ) Radial Sheath 5F / 6F- Us Fda And Japan Pmda And Dcgi Approved ( B ) Femoral Sheath 5F / 6F-U Us Fda And Japan Pmda And Dcgi Approved , Two Locking Mechanism ( A ) Snap On / Click Off ( B ) Rotating Type. Have Unique Intro Cross Cut Valve Which Maintain Uncompromised Hemostasis To Avoid Bleeding.Radial Sheath 5F / 6F Or Equivalent , Tiger 5F / 6Fcatheter- Us Fda And Japan Pmda And Dcgi Approved , Tiger 5F / 6F Catheter Equivalent Tig 2 Inner Diameter To 0.050 With Maximum Pressure Upto 1200 Psi. , Angiographic Catheter – Tig Curve Comprised Of A Two-Layer Construction, Double Braided Stainless-Steel Two-Ply Mesh Sandwiched Between Layers Of Polyurethane And Polyamide Elastomers. •Must Have 32 Strands Of Stainless-Steel Braid. •Must Have The Shaft Inner Layer And Outer Layer Contain Barium Sulphate. •Must Have Anti-Kinking Protector Sleeve, With Non-Braided Tip Shaft ( Distal -2 Cm ) . •Trans Radial Catheter Must Have Shapes Designed To Cannulate Left And Right Coronary Arteries Tig, Tig Ii, Jacky, Sarah. •Must Be Available In 4F, 5F, 6F Sizes •Must Have Inner Diameter Of 4F = 1.03Mm, 5F= 1.20Mm, 6F = 1.30Mm •Usfda And Pmda –Approved , Dye ( Non-Ionic Contrast Agent 100Ml It Should Be Us Fda / Ce & Dcgi Approvediohexol As Salt Name With 350 Mg / Ml Concentration , Iodixanol As A Salt Name 320Mg / Ml With Plastic Bottle With Hanger 100Ml Pack , ( A ) Femoral Sheath 5F / 6F / 7F / 8F / 9F / 10F / 11F / ( B ) Femoral Long Sheath 30 To 50 Cm , Unilock Syringe 10 Ml , Iv Cannula ( 18, 20, 22 G ) , Disposable Ecg Electrodes For Adults- Us Fda / Ce & Dcgi Approved • Adult Diaphoretic Foam Electrodes. • Should Be Pre-Gelled, Peel And Stick Electrode With Excellent Adhesion • Should Have No Residue Once Removed Should Conform To Or Exceed The Highest Industrial Standard For Ecg Electrodes, Quality Certification From Authorized Agencies To Be Provided , Cd – R Media With Atleast 700 Mb Storage And Atleast 52X Recordable Speed Dvd , Pressure Monitoring Line 200Cm , Manifold ( Two Port ) ( Right On ) , High Pressure Line - 200 Cm , Dvd , Docking Wire , Swan Ganz Catheter - Ce Approved - 6F / 7F Us Fda / Ce And Dcgi Approved , Gadoteric Acid 10 Mlvial With Usfda Approved , Gadotericacid20 Ml Vials With Usfda Approved , Radial Artery Haemostasis Device- ( T.R. Band ) Consists Of Two Balloon Specially Designed For Spot Compression Of The Radial Puncture Site. Must Have Belt Magic Tape For Fast Application •Must Have Curved Support Plate. Must Have Green Positioning Marker. •Must Be Available In 2 Sizes – 24Cm And 29Cm Usfda+Pmda Approved• , Special Slender Sheath ( Gss ) Must Have Unique Thin Wall Technology Reducing The Outer Diameter By 1• Fr Size Whilst Maintaining The One Size Lager Inner Diameter. Must Have 7Fr Sheath With Outer Diameter Of 2.8Mm, 6Fr With Od Of• 2.46 Mm & 5Fr With Od Of 2.13Mm. Hydrophilic M Coating With 20 / 21G Surflash Needle And Tif Tip• Technology Which Provide Optimal Tapering Design. Usfda / Pmda Approved• , Group B: ( Consumable For Ptca ) , ( A ) Judkins Guiding Catheter ( Jr Jl & Pigtail Ebu, Routine And Sidehole Catheterxb, Xbr ( Terumo, Cordis, Meditronic, Boston Scientific, Translumina ) Or Equivalent Qualityus Fda / Ce & Dcgi Approved • 4 French / 5 French / 6 French / 7 French / 8French Size Left And Right Judkins Catheters In Various Standard Curves And Lengths. , Special Guiding Catheter – Ikari Curve •Must Have Ikari Curve For Radial Route. •Must Have Stainless Steel Flat Wire Braid •High Strength Wired Braided Catheter With Inner Layer Of Ptfe With Fluoropolymer. •Must Have Zone Technology - Five Zone Each Fabricated From A Material Of Different Stiffness. •Must Have Larger Lumen.6Fr Id - .071 •Usfda / Pmda Approved , Ptca Inflation Device – Us Fda Approved , Nih Catheter Us Fda / Ce & Dcgi Approved • 4 French / 5 French / 6 French / 7 French / 8French In Various Standard Curves And Lengths. , Cournard Guidingcatheter Us Fda / Ce & Dcgi Approved • 4 French / 5 French / 6 French / 7 French / 8French In Various Standard Curves And Lengths. , Double Lumen Thrombo-Aspiration Catheter , ·Swan Ganz Catheter , Vascular Closure Device With Bio Absorbable Pga Suture That Provide A Secure Seal, , Bioabsorbable Collagen Designed To Conform To The Arteriotomy For Confident Closure, And Low Profile Bioabsorbable Anchor ( 50:50 Blend Glycolideandlactidepolyer ) To Fit Closely Against Arterial Wall Leaving Blood Flow Undistributed While Maintaining Vessel Diameter. Againt . , Ptca Inflation Device- Us Fda / Ce & Dcgi Approved • Efficient Locking System To Maintain High Pressure • Rapid Inflation And Deflation • Clear Barrel For Easy Visualization Of De-Bubbling • Luminescent Analog Pressure Gauge ( Up To 30 Atm ) • Ergomatric And Use Friendly Hand Held Design. , ( A ) ( Haemostatic Y-Connector ) For Ptca – Push Mechanism - Us Fda / Ce & Dcgi Approved • Should Accommodate Virtually All Interventional Devices • Luer Connector At The Guiding Catheter End • Rotating Adapter At The Guiding Catheter End • Should Have Bleed Back Safety Mechanism • Stepwise Control For Open, Semi-Open And Closed Position ( B ) Ptca Y Connector 400 Kpa Leak-Proof Seal From Proprietary Designed Valve, *7F-9F Compatible Lumen Allowing Delivery Of Wide Range Of Devices And Torque And Introducer Fit 0.014-0.021 Guide Wire. , Hydrophilic Guidewire With Mcoat Technology Tapered Tip, Single Nitinol Core Alloy, Tungsten-Infused Polyurethane Jacket • Hydrophilic Polymer Coat. •One Piece Construction & Radiopaque Polyurethane Jacket. •Must Be Available In Standard And Stiff. •Must Be Available In .035, .032, .038, .025, .018 Diameter And 260 Cm Length - Straight / Angled / 1.5 Mm J Shape •Usfda And Pmda Approved , ( A ) Baby J Wire With 1.5Mm J Tip – 180 Cm And •Baby J Curve Must Have Radius Of 1.5 Mm. •Super Elastic Nitinol Alloy, M Coat Hydrophilic Coat, •One Piece Construction For 1:1 Torque & Radiopaque Polyurethane Jacket. •Must Have Tungsten-Infused Polyurethane Jacket. •Usfda And Pmda Approved ( B ) Baby J Wire With 1.5Mm J Tip – 260 Cm And •Baby J Curve Must Have Radius Of 1.5 Mm. •Super Elastic Nitinol Alloy, M Coat Hydrophilic Coat, •One Piece Construction For 1:1 Torque & Radiopaque Polyurethane Jacket. •Must Have Tungsten-Infused Polyurethane Jacket. •Usfda And Pmda Approved , .014” One Piece Core Workhorse Wire With Jointless Spring Coil With Sion Technology Having Composit Core With Actone Inside Length 28Cm Tip Load 0.7 Gm 180 Cm Length Tip Radiopacity 3 Cm , .014” One Piece Core Workhorse Wire With Jointless Spring Coil With Sion Technology Having Composit Core With Actone Inside Length 20Cm Tip Load 0.5 Gm 180 Cm Length Tip Radiopacity 3 Cm , .014” On E Piece Core Workhorse Wire With Jointless Spring Coil With Sion Technology Having Composit Core With Actone Inside Length 22Cm Polymer Sleee Length With Slip Coat Coating Over The Polymer Sleeve Tip Load 0.8 Gm 180 Cm Length Tip Radiopacity 3 Cm , .014” On E Piece Core Workhorse Wire With Jointless Spring Coil 22 Cm Polymer Sleev Length With Slip Coat Coating Over The Polymer Sleeve Tip Load 1Gm 180 Cm Length Tip Radiopacity 3 Cm , Extra Support 0.014Wire; 0.7 Gf Tip Load Tip Radio Opacity 4 Cm 180 Cm Length Ptfe Coating Over The Shaft Silicone Coating Ovr Spring Coil , .014 One Piece Core Workhorse Wire With Jointless Spring Coil With Polymer Jacket With Sion Technology Having Comosit Core With Actone Inside Length 28 Cm With Tip Load 0.8 Gm 180 Cm Length Tip Radiopacity 3 Cm , .014 One Piece Core Workhorse Wire With Jointless Spring Coil With Polymer Jacket With Sion Technology Having Comosit Core With Actone Inside Length Tip Radiopacity 3 Cmwith Tip Load 0.5 Gm , .014 One Piece Core Workhorse Wire With Jointless Spring Coil With Tapering To .009” 0.8Gf Of Tip Load; 16 Cm Plymer Sleeve Length With Slip Coat Coating Over The Polymer Sleeve, 190 Cm Length Tip Radiopacity 16 Cm , .014 One Piece Core Cto Wire With Jointless Spring Coil Ptfe Coating Over The Shaft, Tip Load 3G, Tip Load 3G, 4.6 G And 12G, 180 Cm Length With Tip Radiopacity 11 Cm , One Piece Core Wire With Jointless Spring Coil With Slip Coat Coating Over The Spring Coil Tapering To .009” Tip Load 9G 180 Cm Length Tip Radiopacity 20 Cm , One Piece Core Wire With Jointless Spring Coil With Slip Coat Coating Over The Spring Coil Tapering To .009” Tip Load 12G 180 Cm Length Tip Radiopacity 20 Cm , One Piece Core Wire With Jointless Spring Coil With Slip Coat Coating Over The Spring Coil Tapering To .008” Tip Load 20G 180 Cm Length Tip Radiopacity 17 Cm , .010” One Piece Core Wire With Joint Less Spring Coil Length 15 Cm Cone Tip With A Tip Load Of 3.5 Gm 190 Cm Length Tip Radiopacity 15 Cm , Ptca Guide Wire – Core Material Elastinite Nitinol For Excellent Flexibility And Durability, Shaping Ribbon For Excellent Shape Retention And Atraumatic Tip Load Less Than 0.65 Gm With Regular Length, Regular Shaft Support And Floppy Tipus Fda / Ce & Dcgi Approved , Ptca Guide Wire-Durasteel Stainless Steel For Durability And Excellent Torque Control, Full Polymer Jacket, Core To Tip Design For Precise Steering And Tip Control, Various Tip Loads 0.8 Gm To 1.2 Gm For Complex Anatomies, Hydrophilic Coating For Longer Lasting Lubricity. Us Fda / Ce & Dcgi Approved , Ptca Guide Wire – Exchange Length Us Fda / Ce & Dcgi Approve , Ptca Guide Wire-Durasteel Stainless Steel For Durability And Excellent Torque Control, Full Polymer Jacket, Core To Tip Design For Precise Steering And Tip Control, Various Tip Loads 1.5 Gm To 4.1.Gm For Complex Anatomies, Hydrophilic Coating For Longer Lasting Lubricity. Us Fda / Ce & Dcgi Approved , Ptca Guide Wire – Hydrophilic Coated, Exchange Length Us Fda / Ce & Dcgi Approved , Ns Ptca Wire Floppy. Extra Floppy Intermediate & Hypercoat Including Cto Wires .014Diameter Ptca Wires With Directly Jointed Sus And Nitinol Shaft Through Duocore Technology For Superior Torque Transmission Available In Various Tip Loads- Us Fda And Japan Pmda And Dcgi Approved , Extra Floppy Ptca Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 / 300 Cm Length •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocoretechnology And Silicon Coated Joint. •Must Have Ptfe Coating From 25 To 180 Cm Length. & Mucus Coat Hydrophilic Coating Up To 248 Mm •Should Have 0.6-Gram Force Tip Loads •Usfda+Pmda , Floppy Tip Ptca Guide Wire – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length. •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocoretechnology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 248 Mm, & Ptfe Coating From 25 To 180 Cm Length. •Should Have 1 Gram Force Tip Loads •Usfda+Pmda , Hypercoat Ptca Guide Wire With 9.7-Gram Force Rail Support– Mucus Coated Hydrophilic Distal Tip, 0.014” Diameter And 180 / 300 Cm Length •Must Have Platinum Coil At Distal Tip. 14 Mm Tip Shape Length. •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocoretechnology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 250 Mm & Ptfe Coating From 25 To 180 Cm Length. •Should Have 1-Gram Fore Tip Load •Usfda+Pmda , Cto Stiff Ptca Guide Wire - 3.6-Gram Force Tip Load – 2 Mm Silicon Coated Distal Tip, 0.014” Diameter And 180 Cm Length. •Must Have Platinum Coil At Distal Tip. Balance Of Hydrophilic And Hydrophobic Coating •Must Have Directly Jointed Sus And Nitinol Shaft Through Duocoretechnology And Silicon Coated Joint. •Must Have M Coat Hydrophilic Coating Up To 248 Mm & Ptfe Coating From 25 To 180 Cm Length. •Should Have 3.6-Gram Fore Tip Load •Usfda+Pmda , Micro Catheter To Be Used For Cto Fine Cross Antegrade And Retrograde Apporch. -Us Fda / Ce & Dcgi Approved , Aspiration Thrombectomy Catheter • Available In Size 6F, 7F Both, Must Have Entry Profile 0.019 Inches • Must Have 1.30 Mm Square Suction Area • Braided Polyamide Elastomer Shaft, Stainless Steel Wire Braiding And Guide Wire Type Stylet, • 6.0Mm Tip Length For Making Aspiration Inlet To Come Closer To The Target Thrombus And 10Cm-Length Depth. • Must Have Distal 40 Cm Hydrophilic Coating. • Pmda And Dcgi Approved , Cto Indicatedsemi-Complaint Balloon With Slim Seal Technology On Distal Tip With Lesion Entry Profile Of 0.017, Crossing Profile Of 0.021 And Single Flexible Tungsten Marker Available In Unique Diameter Of 1.2Mm With Variety Of Lengthsus Fda / Ce & Dcgi Approved , Ptca Balloon ( Non-Compliant ) -Us Fda / Ce & Dcgi Approved • Quote Both Monorail ( Rapid Exchange ) And Otw Balloons • Available In All Sizes From 2 - 4.0 Mm, Variable Lengths Should Have A Very High Rated Burst Pressure , Ptca Balloon Ultra Lowentry Profile Balloon With 0.016 Entry Profile, Thin Marker Of 25Micro Milimeter And Core Wire Shaft For Batter Pushabilty With Widerange From 1Mm To 4Mm Diameter. , Ptca Balloon Semi Compliant Cto Balloon With Ultra Low Entry Profile With 0.40Mm Or 0.016 And Entry Profile From 1.25*10 To 2.25*10 Remains Same For Crossablity Even With Higher Diameter Balloon. , Ptca Balloon Semi Compliant Balloon With Entry Profile Of0.40Mm Or 0.016 Or Execellentcrossablity ( A ) Sirolimus Drug Eluting Balloon With Nano Carriers Ce Marked ( B ) Drug Coated Balloon - Drug Coated Balloon With 2 ?G / Mm2 Dose Of Paclitaxel With Polysorbate& Sorbitol As Carrier Which Will Deliver An Optimal, Therapeutic Drug Dose To The Target Vessel Wall After A Minimum 30 Second Inflation Time. Available In Sizes- 035 Guidewire Compatible – 120 Cm Shaft - 4Mm -6Mm Dia, Lengthupto 150Mm, 035 Guidewire Compatible – 75Cm Shaft – 5Mm – 12 Mm Dia, Length 60Mm, 014 Guidewire Compatible – 150 Cm Shaft – 2Mm To 3.5Mm Dia, Length 120 Mm , High Pressure Ptca Dilatation Catheter With Small Entry Profile Of 0.43Mm And Small Balloon Profile Of 0.034” With Special Silicon Coating On Balloon To Avoid Mellon Seed Effect. • Small Distal Shaft Profile Of 2.5-2.6Mm To Allow Kbt In 6Fr Large Lumen Guiding Catheter. , Lesion Entry Profile - 0.016 / Nominal Pressure - 12 Bars / Rbp - 22 Bars / Impeccable Tip / Hydrophilic Coated / Non-Compliant Balloon / Prime Shaft , Dual Layer / Rbp 35 Bars / Abp 45 Bars / Strictly Non-Compliant , Ptca Balloon ( Semi Compliant ) – ( Usfda Approved ) Monorail, Bi Segment Inner Lumen Shaft, Monorail Catheter, Z Glide Coating, Proximal Shaft – 2.6Fr, Distal Shaft – 2.3 Fr, Balloon Material Opti Leap, Delivery System Working Length 143 Cm Size 1.2, 1.5, 1.2 Push, 1.5 Push, 2-4Mm Dia X 8, 12, 15, 20, 30 Lengths , ( A ) Ptca Balloon ( Non Compliant ) – ( Usfda Approved ) Bi Segment Inner Lumen Shaft, Monorail Catheter, Z Glide Coating, Proximal Shaft – 2.6Fr, Distal Shaft – 2.3 Fr, Balloon Material Opti Leap, Delivery System Working Length 143 Cm Size - 2-6Mm Dia X 6, 8, 12, 15, 20, 30 Lengths ( A ) High Pressure Non-Compliant Balloon With Innovative Triple Layer Balloon Technology With High Pressure Resistance Of 22 Atm. Must Have Elastomer Outer Layer, Middle Layer Of Polyamide And Inner • Most Layer Of Elastomer. Must Have Nominal Pressure Of 12Atm And Rbp Of 22Atm. •Shorter Thin Distal Tip Of 2.9Mm With Low Entry Profile Of 0.43 Mm. Must Have Hydrophilic Mucus Coating Must Have 3.0 Mm Short Taper Balloon Shoulder& Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile.Must Have 2.6 French Stainless Steel Core Wire Structured Shaft•& Stainlesssteel Stylet In Mid Shaft. Must Have Hypotube Without Ptfe Coating. Must Have Three Pleats Re-Wrappable Structure. Pmda+Ce Approved• , Cto Balloon With Ultra – Ultra Low Entry Profile Of 0.016 Must Have Hydrophilic Mucus Coating. •Should Have Smallest Diameter 1.00Mm And 5Mm Length. •Must Have 0.8Mm Shorter And 25?M Thinner Radiopaque Marker For Lower Crossing Profile. •Must Have Flexible Tip With Short Balloon Bonding Part Of 0.4Mm. •Nominal Pressure Of 06 Atm And Rbp Of 14 Atm •Must Have 2.4 To 2.7 French Tapered Stainless Steel Core Wire Structured Shaft. •Must Have Three Pleats Re-Wrappable Structure. •Pmda+Ce Approved , Dual Layer / Rbp 35 Bars / Strictly Non-Compliant ( Only 10% Growth ) / Andfor Super High Pressure Ptca, A Manometer Of 55 Atm , Cto Nc Balloon Diameter 0.85 Mm Entry Profile .016 Rbp 21 Hydrophilic Single Proximal Marker. , Dedicated Dual Lumen Micro Catheter For Side Branch Access , Thrombus Aspiration Catheter With Removable Core Wire And 30Cm Hydrophilic Coating From The Tip; Available In 6F And 7F , Semi-Complaint Ptca Balloon With Smallest Entry Profile Of 0.0157, Tapered Balloon Shape, Unique Tri-Fold Wrapping Technology, Tr2 Hydrophilic Coating; Available In Lowest Profile 1 Mm Diameter, Longer Shaft Length Of 146Cm. , Non-Compliant Ptca Balloon With Highest Rbp Up To 22 Atm; Tapered Balloon Tip To 4Mm With Lowest Shoulder Angle To 32 Deg; Available In Lowest Profile 1.5Mm Diameter, Longer Shaft Length Of 146Cm. , Special Ptca Balloon ( Non-Compliant ) For Post Dilation. Must Have Diameter Starting From 1.75 Mm-5.0 Mm. Balloon Material Must Be Nylon For Controlled Compliance. Quote Both Monorail ( Rapid Exchange ) Balloon. Ce Approved , Cutting Balloon For Ptca Having Microsurgical Atherotomes ( Blades ) - Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) Balloons Available In The Sizes And Lengths , Wire Based Scoring Balloon Cathethr. Us Fda / Ce & Dcgi Approved • Available In The Sizes And Lengths Monorail ( Rapid Exchange ) , Everolimus Eluting Stent. Cobalt Chromium With 60 Microns Strut Thickness. Hydrophilic Coating On 3 Mm Balloon Shaft. Biodegradable Coating Only On Abluminal Side. , Sirolimus Eluting Stent. Cobalt Chromium With 60 Microns Strut Thickness. Hydrophilic Coating On 3 Mm Balloon Shaft. Biodegradable Coating Only On Abluminal Side. , High Pressure Semi Complaint Ptca Balloon Must Have Low Entry Tip Profile Equal To Or Less Than 0.016 Should Have Nominal Pressure 6 Atm Or Above And Rbp Above 14 Atmmust Be Available In Diameter 1.0 Mm Along With Other Size Matrix Starts From Diameter 1.75 Mm To 4 Mm Quote Both Monorail And Otw Balloonus Fda / Ce & Dcgi Approved , Special Ptca Balloon ( Non Complaint ) For Post Dilations Must Have Diameter Strating From 1.75 Mm To 5.0 Mm Balloon Material Must Be Nylon For Controlled Compliance. Quote Both Monorail And Otw Balloonus Fda / Ce & Dcgi Approved , Semi Complaint Balloon - Thin Multi-Layer Balloon, Tri Fold Balloon Design For Good Rewrap, Semi-Complaint Coronary Balloon With Laser Bond Technology On Distal Tip With Crossing Profile Of 0.021”, Tip Entry Profile Of 0.017”, Nominal Pressure Of 8Atm And Rbp Of 14Atm Available In Diameter 1.20-4.00Mm And Lengths 6Mm -30Mmus Fda / Ce & Dcgi Approved , Non-Complaint Coronary Balloon With Tri-Fold Layers And Tip Entry Profile Of 0.018” With Nominal Pressure Of 12Atm And Rbp Of 18Atm. Excellent Flexibility And Tight Rewrap With Flat Compliance For Excellent Stent Apposition, Available In Diameter 2.0-4.5Mm And Lengths In 8Mm-25Mmus Fda / Ce & Dcgi Approved , Workhorse Guidewire With Triple Spring 304V Stainless Steel With Niti Distal Core And Cold Working Rotary Swagging Tip Available In Tiploads Between 0.6-0.8Gm And Lengths ( 190 / 300Cm ) Us Fda / Ce & Dcgi Approved , Semi-Complaint Coronary Balloon With Slim Seal Technology On Distal Tip With Crossing Profile Of 0.021”, Lesion Entry Profile Of 0.017” And Microglide Coating Available In Diameter 2.25-5.00Mm And Lengths 6-30Mmus Fda / Ce & Dcgi Approved , Special Ptca Balloon Non-Complaint Coronary Balloon With Multilayer Crossflex Balloon Technology And Round Tip With Lesion Entry Profile Of 0.018” Available In Diameter 1.5Mm-5Mm And Lengths In 6Mm-25Mm With Skive Technology On Mid Shaft Of Dilatation Catheterus Fda / Ce & Dcgi Approved , Workhorse Guidewire With Durasteel Core, Responsease Core Grind Technology With Hydrophilic Coating And 1Cm Uncoated Distal Tip For Tactile Feedback Available In Multiple Variants With Same Tipload Of 0.9Gmus Fda / Ce & Dcgi Approved , Workhorse Guidewire With Triple Spring 304V Stainless Steel With Niti Distal Core And Cold Working Rotary Swagging Tip Available In Tiploads Between 0.6-0.8Gm And Lengths ( 190 / 300Cm ) .Us Fda / Ce & Dcgi Approved , Cto Indicated Penetration Guide Wire For Antegrade Wire Escalation ( Awe ) Technique With Unique Micro Textured Tip For Cap Engagement And Tapered Tip For High Penetration Powers. Tip Load 11 To 14 Gm Penetration Power – Above 160 Kg / In2us Fda / Ce & Dcgi Approved , Tuohy Borst ( Haemostatic Y-Connector ) For Ptca Push Pull Mechanism – Us Fda , Amplatz Wire – Ptee Coated – ( Regular Length ) .035 Large Stainless Steel ( Ss ) Core With Ss Flat Wire Coils Gradual Taper With Core To Tip Support And Flexibility For Atraumatic Navigation Through Fortuous Anatomy 150 Cm And 180 Cm Usfda Approved , Group C: Stents , Stainless Steel Coronary Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Stainless Steel Coronary Stents, Premounted On Balloon –Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Cobalt Chromium Coronary Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Cobalt Chromium Coronary Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Covered Coronary Stents – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) Both • Available In The Sizes And Lengths • Covered Graft Stent For Dissectedartery , Stainless Steel Renal Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) • Available In The Sizes And Lengths , Zotarolimus Eluting Stent - Us Fda / Ce & Dcgi Approved , Abluminally Coated Sirolimus Eluting Thin Struts Microporus Chromium Cobalt Stent With Bio Absorbable-Polymer Matrix, Where Balloon Is Also Coated With Sirolimusus Fda / Ce & Dcgi Approved , Abluminally Coated Sirolimus Eluting Thin Struts Microporus Stain Less Steel Stent With Bio Absorbable-Polymer Matrix, Where Balloon Is Also Coated With Sirolimusus Fda / Ce & Dcgi Approved , Sirolimus Eluting Stent Cobalt Chromium With Diameter Of 2Mm To 4.5Mm With Length Of 8Mm To 48Mm With Biogradable Polymer.Us Fda / Ce & Dcgi Approved , Biolimus Eluting Stent - Us Fda / Ce & Dcgi Approved , Tacrolimus Eluting Stent - Us Fda / Ce & Dcgi Approved , Drug Eluting Biodegradable Polymer & Shellac Resign Top Coatus Fda / Ce & Dcgi Approved , Everolimus Eluting Chromium Cobalt Multi Link Drug Eluting Stent -Us Fda / Ce & Dcgi Approved , Everolimus Eluting Chromium Cobalt Multi Link 48Mm Drug Eluting Stent -Us Fda / Ce & Dcgi Approved , Everolimus Eluting Platinum Chromium Stent Bio Absorvbale Polymer Stentus Fda / Ce & Dcgi Approved , Sirolimus Eluting Stent Cobalt Chromiumwith 2 Links & 8 Crownswith Diameter Of 2Mm To 4.5Mm With Length Of 8Mm To 38Mm With Biogradable Polymer And Gradient Coating.Us Fda / Ce & Dcgi Approved , Biodegradable Polymer / Microporous Surface / Sirolimus Drug & Shellac Resign / Abluminal Coating / Temperature Control Device-Tag Alertus Fda / Ce & Dcgi Approved , Dual Drug Polymer Free Stent / Plat Form-Cobalt Cromium / Probucol Drug Instead Of Polymer / Microporous Surface / Abluminal Coating / Shellac Resin / Strut Thickness 79Micron , Sirolimus Coated Drug Stent On Cobalt Chromium - Ce / Us Fda And Dcgi Approved , Silicon Carbide And Sirolimus Drug Eluting Stent – Ce / Us Fda And Dcgi Approved , C.P. Stent Covered , C.P. Stent Uncovered , Drug Eluting Platinum Chromium Coronary Stents, Premounted On Balloon – Us Fda / Ce & Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) Available In The Sizes And Lengths , Sirolimus Eluting Cobalt-Chromium Stent With Abluminal Gradient Coating - ( L-605 Co-Cr Alloy ) ( Should Not Have Drug & Polymer Coating On Joints & Bends ) . 2 Links – 8 Crown Design •Bioresorbable Polymer Of Plcl ( Poly Lactic Acid + Poly Capro Lactone Pcl ) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. •Low Concentration Of Sirolimus ( 0.8Ug / Mmsq ) . •Minimum Tip Entry Profile Of 0.42Mm •Pmda+Ce Approved , Sirolimus Eluting Cobalt-Chromium Stent With Abluminal Gradient Coating - ( L-605 Co-Cr Alloy ) ( Should Not Have Drug & Polymer Coating On Joints & Bends ) . 2 Links – 8 Crown Design •Bioresorbable Polymer Of Plcl ( Poly Lactic Acid + Poly Capro Lactone Pcl ) With Degradation Time Of 3-4 Months. Should Have Bioinspired Open Cell In Phase Design. •Low Concentration Of Sirolimus ( 0.8Ug / Mmsq ) . •Minimum Tip Entry Profile Of 0.42Mm Should Have Gradiant Coating •Pmda+Ce Approved , Polymer Free Evrolimus Eluting Stent Coronary Stent Withco-Cr Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin Withdiameters Of 2.0 Mm To 4.0 Mm Of Varying Length. Entry Profile 0.016 , Biodegradable Polymer Sirolimus Eluting Coronary Stentwith Stainless- Steel Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin Withdiameters Of 2.0 Mm To 4.0 Mm Of Varying Length. , Polymer Free Sirolimus Eluting Coronary Stent With Co-Cr Platform Having Microporous Surface, Abluminal Coating And Shellac Resin Withdiameters Of 2.0 Mm To 4.0 Mm Of Varying Length. Entry Profile 0.016 , Biodegradable Polymer Sirolimus Eluting Coronary Stentwith Co-Cr Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin Withstrut Thickness 68?M ( Sv ) , 79?M ( Mv ) . , Biodegradable Polymer Sirolimus Eluting Coronary Stentwith Stainless- Steel Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin With Temperature Control Device - Tag Alert , Biodegradable Polymer Sirolimus Eluting Coronary Stentwith Co-Cr Platform Havingmicroporous Surface, Abluminal Coating And Shellac Resin Withs Strut Thickness 68?M ( Sv ) , 79?M ( Mv ) . , New Generation Des Providing Synergywith Biodegradable Polymer With Microporous Surface. Sirolimus Drug And Cobalt Chromium Surface. , Sirolimus Eluting Stent With Biodegradable Polymer. Distal 3 Mm Tip Should Be Hydrophilic Coated. Strut Thickness Should Be 60Microns. , Everolimus Eluting Stent With Biodegradable Polymer. Distal 3 Mm Tip Should Be Hydrophilic Coated. Strut Thickness Should Be 60Microns , Balloon Expandable Pulmonary Artery Stents – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Available In Various Sizes , Ivc Stents Self Expendable - Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Available In Various Sizes , Everolimus Eluting Chromium Cobalt Multi Link Platform Drug Eluting Stent With True Center Tip For Peak Performance In Complex Leasions -Us Fda / Ce & Dcgi Approved , Sirolimus Bioresorbable Vascular Scaffold Stent Systemus Fda / Ce & Dcgi Approved , Ultrathin Strut 50 Micron Cobalt Chromium Everlimus Eluting Coronary Stents , Group D: Consumable For Peripheral Stenting , Distal Embolic Protection Device - Carotid / Svg • ( One Size For All Carotids ) • Eccentric Filter With Nitinol Loop For360 Degree Wall Apposition • Rx .014 6F Sheath Compatible • 190 Cm Extra Supportwire • Uniform Micro Pore Size Of 110 Micron Pore Size With 1Mm Pore Free Zone • Non-Thrombogenic Nylon Membrane With Hydrophilic Coating • Should Allow Optimal Filtration In Vessels 3– 5.5 Mm Size •Usfda Approved , Balloon Expandable Stent - Renal • Should Be Low Profile, 6F Guide And 0.018 Wire Compatible, Monorail System • Should Have High Consistent Radial Strength, High Flexibility, Enhanced Radiopacity • Should Have Architecture Which Offers Excellent Lumen Coverage And Conformability • Should Have Increased Support And Radial Strength At Proximal End For Ostial Lesion • Stent Should Be Premounted On Semi Compliant Balloon Catheter • Stent Dia 4-7Mm, Length 15 & 19, Cathter Length 90 & 150 Cm. • Should Have Crimping Technology Which Ensures No Stent Slippage From Balloon , Balloon Expandable Stent - Large Diameter • Should Have High Consistent Radial Strength, High Flexibility, Enhanced Radiopacity • Should Have Architecture Which Offers Excellent Lumen Coverage And Conformability • Should Have Low Foreshortening, Low Recoil. • Stent Should Be Premounted On Non Compliant Balloon Catheter To Avoid Dogboning And Proper Scafolding • Should Have Dual Lumen Catheter Design For Faster Deflation • Stent Dia 5-10Mm, Length 27, 37, 57, Cathter Length 135 Cm. • Should Have Crimping Technology Which Ensures No Stent Slippage From Balloon , Self Expanding Stent For Carotid Artery Stenting • Self Expandingelgilloy Stent With Closed Cell Design • Monorail, 0.014 Wire & 6F Sheath Compatible • Reconstrainable Braided Stent • Shaft Length 135Cm • Dia : 6-9 Mm , Peripheral Self Expandable Stent • Should Be Laser Cut Self Expandingnitinol Stent With Proximal And Distal Markers • Should Have Hybrid Cell Design Which Promotes A Balance Of Radial Strength And Flexibility • Stent Struts To Be Electropolished To Avoid Micro Fracture Through Micro Cracks On The Stent Struts • Should Have Controlled Release / Deployment Mechanism To Ensure Precise Placement And Low Foreshortening • Dia 6 - 14 Mm , Length -20, 40, 60 , 80 , 100 , 120 • Should Be 6F Sheath And 0.035 Wire Compatible Across Sent Size Matrix , Peripheral Self Expanding Drug Eluting Stent • Paclitaxel Eluting Self-Expanding Stent With A Polymer That Releases Paclitaxel Over 12 Months With Lowest Dose Density Of 0.167 ?G / Mm2 For Sfa And Ppa. • Triaxial Delivery System • Hybridcell Architecture With Open & Close Celldesisn • Easy Deployment With Thumbwheel & Pull Grip • 6F Sheath Compatibility • Dia - 6 & 7 Mm • Length -40, 60, 80 , 100, 120 Mm • Us Fda Approved • Laser Cut Nitinol Stentdedicatedly Designedfor Sfa & Popliteal • Trixial Delivery System , Hybrid Cell Architecture, • 6F Sheath Compatibility • Dia5, 6, 7 , 8 Mm , Length -40, 60, 80, 100, 120Mm , 150 Mm • Easy Deployment With Thumbwheel & Pull Grip , Inflation Device To Have High Presure Range Upto 26 Atm To Have High Pressure Stopcock Preventing Leakage During High Pressure Inflation 20Cc Volume Holding , Balloons - Nc Workhorse ( 0.035 Wire ) Should Be Non-Compliant / Semi Compliant. Rbp Of 20 - 24 Atm ( 3-8Mm Balloon ) , 14-18 Atm ( 9-12Mm Balloon ) , Should Have High Rated Burst Pressure With Scratch / Puncture Resistant Nybax Material Dual Lumen Shaft With Balloon Laser Bonded And Short Atraumatic Tapered Tip Should Have Lubricious Medi-Glide Coating On Balloon Material Should Have Good Re-Wrap And Low Tip Profile Should Be 5F ( 3-7Mm Balloon ) / 6F ( 8-10Mm Balloon ) / 7F ( 12Mm Balloon ) Sheath And 0.035 Wire Compatible Should Have Min Lesion Entry Profile Of 0.040 ( 1.016Mm ) Should Have Choice Of Long Balloon Lengths 20Mm To 200Mm , Carotid / Renal Angioplasty Balloon • Rx 018 Carotid / Renal Balloon • 018 Guide Wire Compatible • 4F Sheath Compatible To 4 To 7 Mm Diameter With 20Mm Length • Usable Catheter Length 135Cm For All Sizes . • Usfda Approved , Paclitaxel Coated Drug Eluting Balloon For Btk Paclitaxel Coating Should Be 2Ug / Mm2 Should Have Citrus Ester Exipentwith Hydrophobic Coating For Mininising Drug Loss Must Be Compatible With 0.018 -Inch Wire Loading Tool Should Be Avialbale Must Be Compatible With 4 Fr Sheath Balloon Length Should Be 20Mm – 200Mm Dia -2-4 Mm , Paclitaxel Coated Drug Eluting Balloon For Iliac & Sfa Paclitaxel Coating Should Be 2Ug / Mm2 Should Have Citrus Ester Exipentwith Hydrophobic Coating For Mininising Drug Loss Must Be Compatible With 0.018 -Inch Wire Loading Tool Should Be Avialbale Must Be Compatible With 4 Fr Sheath Balloon Length Should Be 20Mm – 200Mm Dia -4-7 Mm , Balloons - 0.018 / 0.014 Wire Compatible Should Be 4F / 5F Sheath And 0.018 / 0.014 Wire Compatible With Choice Of Otw / Monorail Delivery System Should Be Non-Compliant / Semi Compliant Should Have High Rated Burst Pressure With Scratch / Puncture Resistant Pebax Material Should Have Lowest Tip Entry Profile Of Not More Than 0.022 And Good 5 Fold Re-Wrap Design Should Have Bioslide Hydrophilic Coating On Balloon Material Should Have Large Working Range Should Have Excellent Coulum Support With Balloon Laser Bonded And Short Atraumatic Tapered Tip Should Have Full Length Tapered Core Wire For Enhancdpushability And Kink Resistance Should Have Balloon Lengths Starting From 20 Mm- 150 Mm And Balloon Diameter From 3Mm To 10Mm , Balloon - 0.014 Wire Compatible For Btk Procedure With An Ultra-Low Lesion Entry Profile ( 0.017” / 0.43 Mm ) And Best-In-Class Crossing Profile ( 0.030” / 0.76 Mm ) With Deflation Times Of Less Than 10 Seconds*** And Balloon Lengths Up To 220 Mm Balloon Dia From 1.5 Mm To 4Mm With 4 F Sheath Compatibility Across Sizes. Monorail / Over The Wire. , Balloons - Large Diameter For Vessel Diameters Of 12Mm And Above Should Be Non-Compliant And Have Low Deflation Time Balloon Material Should Be Lubriciously Coated With Scratch / Puncture Resistant Balloon Material Min. Sheath Compatibility Of 7F. , Peripheral Cutting Balloon Should Have Choice Of Diameter Range From 5Mm To 8Mm Should Have Micro Surgical Blades ( Atherotome ) On Non Compliant Balloon Only Bigger Diameter Cutting Balloons ( 5 - 8Mm ) With 2Cm Atherotome Should Be 0.018 Wire Compatible With Otw Delivery System Exposed Atherotome Height To Be Not More Than 0.005 , Occlusion Balloon Should Be Soft Compliant Balloon Material With Radiopaque Markers At Both Distal And Proximal End Of Balloon Should Be 14F / 16F Sheath And 0.035 / 0.038 Wire Compatible With Balloon Diameter Of 20Mm, 27Mm, 33Mm And 40 Mm , Guidewires - 0.018 / 0.014 Should Have Glidex Hydrophilic Distal Coating For Negotiating Tortous Anatomy And Colateral Approach. Should Be Available In Both 0.018 And 0.014. Should Provide Excellent Support Like A 0.035 In A 0.018 / 0.014 Wire Single Piece Core Design To Have Better Steerability, Pushability And Torque Transmission , Amplatz Super Stiff Wires - 0.035, 0.038 Should Have Stiff Core, Super Stiff Wire Body, Atraumatic Tip With Gradual Distal Core Taper Should Have Ptfe / Teflon Coating For Reduced Friction During Catheter Tracking. Should Support Catheter Exchange Should Have Flat Coiled Outer Wire Construction For Larger Inner Core And Hence Greater Support , Hydrophilic Marker Wire - 0.035 Should Have Single Piece Core With Radiopaque Polyurethane Jacket And Glidex Coated Hydrophilic Coating 4 Distal Paltinum Magic Markers Spaced At 1Cm For Improved Visualization Single Piece Core Design To Have Better Steerability, Pushability And Torque Transmission , Cto Wire 0.014 0.014 Weighted Tip Cto Guide Wire With Stainless Steel Core Hydrophilic & Hydrophobic Coating Tip Load-12Gm , 18 Gm , 25 Gm , 30 Gm Us Fda Approved Wire Lengths - 190 Cm & 300Cm , Cto Wire 0.018 0.018 Weighted Tip Cto Guide Wire With Stainless Steel Core Hydrophilic & Hydrophobic Coating Tip Load-12Gm , 18 Gm , 25 Gm , 30 Gm Us Fda Approved Wire Lengths - 190 Cm & 300Cm , 0.014 Peripheral Wire Stainless Steel Core Wire Hydrophilic & Hydrophobic Coating Tip Load-3Gm & 6 Gm Us Fda Approved Wire Lengths - 190 Cm & 300Cm , 0.018 Peripheral Wire 0.018 Guide Wire With Stainless Steel Core Hydrophilic & Hydrophobic Coating Tip Load- 7.6 Gm , 6.5 Gm Us Fda Approved Wire Lengths -150 Cm , 200 Cm & 300Cm , Backup Meir Wire - 0.035 • Should Have Extra Stiff Shaft To Support Aaa Device • Should Have Very Flexible And Soft Distal Tip To Avoid Aortic Perforation / Vessel Trauma • Should Have Radiopaque Tip For Excellent Visibility, Ptfe Coated Proximal Shaft For Frictionless Advancement • Sholud Have Choice Of J And C Tip Shape With 185Cm And 260 / 300Cm , Guide Catheters - 6F, 7F, 8F Choice Of 16 Tip Shapes Amongst Indusry Standard Shapes In 55Cm And 90Cm Should Have Excellent Backup Support And Shape Retention Tungsten Atraumatic, Radiopaque Soft Tip Should Have Round Double Wire Braided Construction For Better Torque, Large Inner Lumen With Soft Tapered Tip Ptfe Inner Liner ( For Smooth Passage Of Devices ) And Polyether-Ester Polymer Outer Coating ( For Shape Retention ) , Support Catheter Catheter For Crossing Chronic Total Occlusions In Peripheral Arteries- Fda / Ce Mark Approved Various Sizes , 0.014 , 0.018, 0.035 , Micro Punture Set Accustick Ii Introducer ( 4F Coaxial Dilator / 6F Sheath With Ro ) With Locking Stiffening Cannula Anddiagnosticneedle With Stylet 21G + 0.038 J -Tip And 0.018 Nitinol Wire , Detachable Coil 0.018 Interlock Detachable Platinum Fibered Coil For Peripheral Use , 0.018 Assorted Sizes .Dia 3Mm -14 Mm . Assorted Lengths , Detachable Coil 0.035 Interlock Detachable Platinum Fibered Coil For Peripheral Use , 0.035 Assorted Sizes Dia 3Mm- 20 Mm, Assorted Lengths , Pushablevortx 18 Coil Pushable 0.018 System Platinum Vortx Coils 3 To 6 Mm In Diameter Of Assorted Length , Pushable18 Coil Pushable Platinum 0.018 System Coils, 3-6 Mm Diameter Of Assorted Lenghts , Pushablevortx 35 Coil Pushable Platinum Vortx0.035 System Coils Upto 3 To 9 Mm In Diameter Of Assorted Lenghts , Pushable35 Coil Pushable Platinum 0.035 System Coils Upto 3 To 9 Mm In Diameter Of Assorted Lenghts , Pva Particle Polyvinyl Alcohol Particles 350-500 Microns , Pva Particle Polyvinyl Alcohol Particles 500-700 Microns , Pva Particle Polyvinyl Alcohol Particles 150-250 Microns , Pva Particle Polyvinyl Alcohol Particles 45-150 Microns , Drug Eluting Beads D C Bead - Loadable Hydrogel Microspheres That Are Biocompatible, Hydrophilic, Non-Resorbable, And Precisely Calibrated And Approved For Loading With Doxorubicin And Irinotecan, Available In Size Range Of 70Um - 700Um. , Torquable Pre Shaped Superselectivemicrocatheter Torquablemicrocatheter For Peripheral Embolization, Made Of Nitinolhypotube And Hydrophilictip. Id 0.021 With Different Shapes. ( Bern, J, Swan & Strait ) , Microcatheter For Peripheral Embolization Stainless Steel Braided Microcatheter With Hydrophilic Coating For Peripheral Coil Embolization. Id 0.021 Manually Shapeable Tip , Hi-Flow Microcatheter For Peripheral Embolization Fiber Braided High Flow Microcatheter Od 2.8Fr / Id 0.027 Permiting 710 Micron Pva Particle & 5520 Kpi Burst Pressure. Dmso & Alcohol Compatible , Torquablesuperselectivemicrocatheter With Guidewire Torquablemicrocathetermede Of Nitinolhypotube With Hydrophilic Shapable Tip. Id 0.021 With 0.014 Manually Shapable&Reshapable Tip Wire Guide For Superselective Peripheral Embolization , Hi-Flow Microcatheter For Peripheral Embolization With Guide Wire Fiber Braided High Flow Microcatheter Od 2.8Fr / Id 0.027 Permiting 710 Micron Pva Particle & 5520 Kpi Burst Pressure With Hydrophilic Shapable Tip. Id 0.021 With 0.016 High Torque Control Dimond Cut Nitinolhypotube, Shapable Tip Micro Wire. Dmso & Alcohol Compatible , Peripheral Imaging Ivus Catheter 0.018 Peripheral Imaging Catheter ( Ivus ) With 30 Mhz Frequency To Image Large Peripheral Vessels , Pharmaco Mechanical Thrombolysisdevice / Catheter Pharmaco Mechanical Thrombolysisdevice / Catheterwith Active Infusion Ofthromblytic Agentand Aspiration Suctionin Same Catheter .Dia -4F , 6F , 8F , Power Pulse Kit Angiojet Ultra Power Pulse Kit , Group E: Items For Bmv Procedure And Pulmonary Valve Dilation , Brocken Brough Needle ( Transeptal ) , L.A. Wire, Stylet, Ruler, Syringe, Streching Tube ( Balloon Kit ) , Baloon Size 20-30 Mm Innoue , Baloon Size 20-30 Mmaccura , Baloon Size 20-30 Mm Sym / Equivalent , Mullen Sheath , Baloon Shaper , Septal Dilator , Exchange Length Terumo Wire , Tyshak Balloon ( 9-12 ) , Tyshak Balloon Compatible Extra Stiff Wire ( 021 & 025 ) , Valver Balloon , Balloon ( Innoue ) With Accessories ( Brocken Brough Needle ( Transeptal ) , L.A. Wire, Stylet, Ruler, Syringe, Streching Tube ( Balloon Kit ) , Mullen Sheath, Baloon Shaper, Septal Dilator, Exchange Length Terumo Wire ) , Balloon ( Accura With Accessories ) ( Brocken Brough Needle ( Transeptal ) , L.A. Wire, Stylet, Ruler, Syringe, Streching Tube ( Balloon Kit ) , Mullen Sheath, Baloon Shaper, Septal Dilator, Exchange Length Terumo Wire ) , Balloon For Pulmonary Valve Dilation , Group F , ( A ) Asd Closure Devices With Delivery System – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Device Made Of Biologically Inert Material • Self-Centering, Detachable Device With Delivery Cable • Available In All The Sizes ( 6 Mm – 40 Mm ) ( B ) Titanium Nitride Coated Asd Closure Device With Delivery System -Approved For Pediatric / Adult Use -Device Made Up Of Biologically Inert Material -Available In All Sizes ( 06Mm To 42Mm ) -Titanium Nitride ( Tin ) Coating Should Be There To Prevent Nickel Leaching. -Should Come With Compatible Delivery System , Asd Closure Devices Without Delivery System – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Device Made Of Biologically Inert Material • Self-Centering, Detachable Device With Delivery Cable • Available In All The Sizes ( 6 Mm – 40 Mm ) , Delivery Sheath For Asd Closure Device – Us Fda / Ce & Dcgi Approved • Compatible With The Device Approved In Item No. 1, 2 , ( A ) Left Atrial Appensage Closure Device Us Fda / Ce & Dcgi Approved ( B ) • Titanium Nitride Coated Left Atrial Apendage Closure Device: • Us Fda / Ce & Dcgi Approved • -Should Be Able To Close Single Lobed And Multiple Lobed Appendages. • -Low Profile • -Should Be Compatible To All The Laa Anatomy • Titanium Nitride Coated Vsd Closure Device With Delivery System • -Approved For Pediatric / Adult Use • -Device Made Up Of Biologically Inert Material • -Available In All Sizes ( 06Mm To 24Mm ) • -Titanium Nitride ( Tin ) Coating Should Be There To Prevent Nickel Leaching. ( C ) -Should Come With Compatible Delivery System , Sizing Balloon For Device Closure – Circular Shape Us Fda / Ce & Dcgi Approved , Sizing Balloon For Device Closure – Oval Shaped - Us Fda / Ce & Dcgi Approved , Sizing Plate For Device Closure- Us Fda / Ce & Dcgi Approved , Delivery Cable For Asd / Vsd / Pda Devices - Us Fda / Ce & Dcgi Approved , Retrievers For Asd / Vsd / Pda Devices - Us Fda / Ce & Dcgi Approved , Seath For Retrival Of Devices - Us Fda / Ce & Dcgi Approved , ( A ) Vsd Closure Devices With Delivery System – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Device Made Of Biologically Inert Material • Self-Centering, Detachable Device With Delivery Cable • Available In All The Sizes ( 6 Mm – 40 Mm ) ( B ) Titanium Nitride Coated Vsd Closure Device With Delivery System -Approved For Pediatric / Adult Use -Device Made Up Of Biologically Inert Material -Available In All Sizes ( 06Mm To 24Mm ) -Titanium Nitride ( Tin ) Coating Should Be There To Prevent Nickel Leaching. -Should Come With Compatible Delivery System , ( A ) Pda Closure Devices With Delivery System – Us Fda / Ce & Dcgi Approved • Approved For Pediatric / Adult Use • Device Made Of Biologically Inert Material • Self-Centering, Detachable Device With Delivery Cable • Available In All The Sizes ( B ) Titanium Nitride Coated Pda Closure Device With Delivery System -Approved For Pediatric / Adult Use -Device Made Up Of Biologically Inert Material -Available In All Sizes ( 03-05Mm To 20-22Mm ) -Titanium Nitride ( Tin ) Coating Should Be There To Prevent Nickel Leaching. -Should Come With Compatible Delivery System , Pda Closure Devices Without Delivery System – Us Fda / Ce & Dcgi Approved , Embolisation Coils ( 0.018 Inch ) - Us Fda / Ce & Dcgi Approved • Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils ( 0.035 Inch ) - Us Fda / Ce & Dcgi Approved • Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Coils ( 0.052 Inch ) - Us Fda / Ce & Dcgi Approved • Sizes Ranging From 2 X 2 To 15 X 15 , Embolisation Plugs And Foam , Introducer System For Laa Closure With The Double Angulation Of 45° & 30° Containing I ) Delivery Sheath With Back Bleed Prevention Hemostatic Valve And Side Port, Ii ) Dilator, Iii ) Delivery Cable, Iv ) Loader. 8 / 9 / 10Fr. , Multifunctional Occluder -For Occlusion Of Muscular Vsd, Perimembranous Vsd, Rsov, Apex Window & Av Fistula - Should Be Low Profile ( 4F-6F ) -Should Come With Aelongatable Waist And Can Be Used In Retrograde And Antegrade Approach. , Self-Expandablenitinol Stent With Radial Force Fixation, E Ptfe Dual Membrane Coating For ( Excellent Biocompatibility And Durability Andno Suture On The Main Body To Prevent Pin Hole Leakage ) . Spine – Connecting Bar – ( Gives Axial Support , - Avoids Shortening ) . Size Od - 20Mm To 44Mm; Length - 80Mm, 100Mm, 120Mm, 140Mm 160Mm And 200Mm. Tapering - 4 / 6 / 8Mm , Specifically Designed For Endovascular To Exclusion Abdominal Aortic Aneurysm. A Self-Expandable Nitinol Stent With Eptfe Dual Membrane Coating. No Suture On The Main Body To Prevent Pin Hole Leakage. Od - 22Mm To 34Mm, Length - 120Mm Main Body , Iliac Stent Graft Endovascular Stent Graft Device For The Treatment Iliac Aneurysm Or Dissection. With Proximal Bare Spring Configuration. It Should Be An Extension To Aaa Graft System. Od - 10Mm To 18Mm Length - 60Mm To 120Mm , Peripheral Snare With Tungesten Loop Coated With Titanium Nitride ( 5Mm To 35Mm ) Having A Nitinol Shaft With The Length Of 120Cm. Type - Goose Neck. , Coronary Snare Withtungsten Loop Coated With Titanium Nitride ( 4Mm & 7Mm ) Having Nitinol Shaft With The Length Of 200Cm. Type - Goose Neck , Steerable Sheath With Deflectable Tip ( 90-180 Degree ) Size Available Upto - 5 / 6 / 7 / 8 / 9 / 10 / 12 / 14Fr. In 80Cm 90Cm Length , Aui Stent Graft System Specifically Designed For Treatment Of Endovascular Abdominal Aortic Aneurysm. A Self-Expandable Nitinol Stent With Eptfe Dual Membrane Coating With Connecting Spine Bar For Flexibility & Offers Axial Supportpreventing Foreshortening Of Stent. , Group G: Miscellaneous Item , Intravascular Retriever – Snare ( ‘Amplatz Gooseneck’ Type ) - Us Fda / Ce & Dcgi Approved Snare Kit Should Include • A Snare And Its Compatible Sheath • Should Have Nitinol Shaft • Should Have 90 Degree Preformed Snare Loop • Variable Sizes Of Loop ( 5-35 Mm ) , Sheaths For Intravascular Snares - Us Fda / Ce & Dcgi Approved , Vertebral Catheter - Us Fda / Ce & Dcgi Approved • In Various Standard Lengths And Curves , Coeliac Axis Catheter - Us Fda / Ce & Dcgi Approved • In Various Standard Lengths And Curves / Cobra Catheter , Shepherd’S Hook Catheter- Us Fda / Ce & Dcgi Approved • In Various Standard Lengths And Curves , Microcatheter ( Coiled Stainless Steel Construction ) - Us Fda / Ce & Dcgi Approved • In Various Standard Lengths And Curves • 2-3.8 F Size • .010-.022 Inch Wire Compatible • With Radio-Opaque Marker At Tip , High Pressure Angioplasty Balloon For Peripheral Vascular Use – Us Fda / Ce & Dcgi Approved • Should Have Rated Burst Pressure = 14 Atmosphere • Should Have Hydrophilic Coating • Should Be Available In Various Outer Diameters And Balloon Lengths And Various Shaft Lengths , Peripheral Stent Balloon Expandable ( Otw / Rx ) – Us Fda / Ce & Dcgi Approved • Should Be 0.035” Compatible • Should Be Made Of Cobalt Chromium • Should Be Quoted Either In Open Cell Or Closed Cell Design • Should Be Available In Various Balloon Ods • Should Have Balloon / Stent Lengths Available • Should Have A Shaft Lengths Of 75-135 Cm , Self-Expanding Peripheral Stent – Us Fda / Ce & Dcgi Approved • Should Be 0.014 / 0.018” Compatible • Should Over The Wire • Should Be Made Of Nitinol • Should Have The Least Lesion Crossing Profile For All Stent Diameters • Should Be Available In Various Stent Diameters Of 6-10 Mm • Should Be Available In Various Stent Lengths > 60 Mm • Should Have A Shaft Lengths Of At Least 110 Cm , Ivc Filter – Us Fda / Ce & Dcgi Approved , Ivus Catheter Compatible With System In Cath Lab Of Pbm Hospital Bikaner ( Boston Scientific ) , Ffr Catheter Compatible With St. Jude System , Rota Burr ( All Size ) , Rota Wire , Rotapro Pre Connected Exchangable Burr Catheter ( Rota Advancer And Burr ) - Us Fda Approved ( Compatible With Rotapro Machine ) . , Ivl Cathetar , Iabp Cathetar And Accessories , Bib ( Balloon In Balloon ) Type Balloons For Coarctation Dilatation-Us Fda& Ce And Dcgi Approved • Monorail ( Rapid Exchange ) And Over-The-Wire ( Otw ) Balloons Available In The Sizes And Lengths , Z Med Type Balloon For Aortic Coactation – Us Fda / Ce And Dcgi Approved • 5 To 20 Cm Diameter In All Sizes Otw / Rapid Exchange, Compatible With 0.014” / 0.035” And 0.038” Wire , ( A ) Impella Hemodynamic Support Catheter2.5 ( B ) Impella Hemodynamic Support Catheter5 ( C ) Impella Hemodynamic Support Cathetercp ( D ) Impella Hemodynamic Support Catheterrp , Acist Ivus Catheter • With Dual Frequency 40 / 60 Mhz In Single Catheter • Single Catheter For Both Coronary And Peripheral • Lubricious Hydrophilic Coating Supports Faster Pullback Speed Up To 10 Mm / Sec For Minimizing Ischemic Risk • With Novel Offset To Design, Variflex Imaging Window. , Savvy Sensor Guided Tavi Wire Single Wire Working As A Guide Wire, For Hemodynamic Measurement And For Rapid Lv Pacing , Optowire A Hybrid Nitinol / Stainless Steel Pressure Sensing Guided Wire Powered By Fidela • Patented Optical Pressure Sensor Mounted Proximal To 3 Cm Long Radioopaque • Measure Physiologic Indices Including •Ffr & Diastolic Pressure Radio ( Dpr ) • Wire With Diameter Of .014 And Length Of 180 Cm • Operating Pressure Of -30 To + 300 Mmhg , Consumables For Tavi ( A ) Balloon Expandable With All Required Accessories ( B ) Self Expandable With All Required Assessories , Fine Cross Micro Catheter ( Braided & Coil Construction Must Have Along With Distal Hydrophilic Coating ) To Be Used For Cto Antegrade And Retrograde Approach , Guide Extansion Catheter Us Fda Approved , Group H: Pace Maker , Vvirpacemaker Us Fda / Ce & Dcgi Approved Permanent Pacemakers With All Leads And Accessories With Life Time Warranty Mri Compatible 3 Tesla , Vvirpacemaker Us Fda / Ce & Dcgi Approved Digital Multi-Programmable Pacemaker.Mode: Single Chamber: Vvir / Aair. With Beat To Beat Auto Capture And Proven Longevity Of >9.5 Years With 100% Pacing Of Ra / Rv @2.5Volts. Digital High Sampling Rate Of P / R Wave And Automated Ventricular Rate Stabilization During Af. With 6F Compatible Passive-Fixation Tined Lead Or Screw In Lead & Lead Introducer & Dual Rate Responsive Sensors With Life Time Warranty. Mri Compatible 3 Tesla , Vdd / Vddr Pacemaker Us Fda / Ce & Dcgi Approved Permanent Pacemakers With All Leads And Accessories With Life Time Warranty Mri Compatible 3 Tesla , Dddr Pacemaker Us Fda / Ce & Dcgi Approved Permanent Pacemakers With All Leads And Accessories With Life Time Warranty Mri Compatible 3 Tesla , Dddr Pacemaker Us Fda / Ce & Dcgi Approved Digital Multi-Programmable Pacemaker Mode: Dual Chamber: Dddr. With Features Of Automatic Threshold Check, Auto Adjusting Of Av Delay ( Extendable Upto 400 Ms ) , And Automatic Intrinsic Activity Search. With Beat To Beat Auto Capture And Proven Longevity Of >10 Years With 100% Pacing Of Ra & Rv At 2.5 Volts. With 6F Compatible Passive-Fixation Tined Leads Or Screw In Leads & Lead Introducers & Dual Rate Responsive Sensors With Life Time Warranty. Mri Compatible 3 Tesla , Dddr Pacemaker Us Fda / Ce & Dcgi Approved Permanent Pacemakers For Physiological Pacing ( His Bundle And Left Bundle Pacing ) With All Leads And Accessories With Life Time Warranty Mri Compatible 3 Tesla , ( A ) Physiological Pacing Lead ( His Bundle And Left Bundle Pacing ) & All Accessories 3Tmri Compitableus Fda / Ce & Dcgi Approved ( B ) Lumenless Lead Fda Approved Lead For His Bundle Pacing And Lbbap , Dddr Pacemaker Us Fda / Ce & Dcgi Approved Digital Multi-Programmable Pacemaker Mode: Dual Chamber: Dddr. With Features Of Automatic Threshold Check, Auto Adjusting Of Av Delay ( Extendable Upto 400 Ms ) , And Automatic Intrinsic Activity Search. With Beat To Beat Auto Capture, With 6F Compatible Passive-Fixation Tined Leads Or Screw In Leads & Lead Introducers & Dual Rate Responsive Sensors With Life Time Warranty. Mri Compatible 3 Tesla , Aicd Single Chamber Pacemaker With All Leads Us Fda / Ce & Dcgi Approved, Icd With All Leads And All Accessories • Single Chamber • All Basic Programmable Parameters • Must Be Mr Conditional. • Must Have Facility Of Atp Befor Charging For Defibrillation • All Basic Programmable Parameters With Shock Reduction Technology Comprising Of Svt, T-Wave, Rv-Noise Discrimination Features. • Must Have Facility Of Rf / Distance Telemetry Programming • Rv Lead Must Be 9F Of Less In Size And Have Proven Performance Of 5 Years. • Lead Should Be Steroid Eluting And Df-1 & Df-4 Compatible • Mri Compatible 3 Tesla • Warranty Shoud Not Be Less Than 10 Years , Aicd Dual Chamber Pacemaker With All Leads Us Fda / Ce & Dcgi Approved, Icd With All Leads And All Accessories • Dual Chamber • All Basic Programmable Parameters • Must Be Mr Conditional • Must Have Acility Of Atp Befor Charging For Defibrillation • All Basic Programmable Parameters With Shock Reduction Technology Comprising Of Svt, T-Wave, Rv-Noise Discrimination Features. • Must Have Facility Of Rf / Distance Telemetry Programming • Rv Lead Most Be 9F Or Less In Size And Have Proven Performance Of 5 Years • Must Have Algorithm Of Automatic Conversion From Aair To Dddr And Vice Versa ( For Minimize Ventricular Pacing ) • Must Have Algorithm For Management Of Neuro Cardiogenic Syncope • Must Have Automatic Threshold Management For Patient Safety. • Mri Compatible 3 Tesla • Warranty Shoud Not Be Less Than 8 Years , Biventricular Pacemaker With All Accessories And Leads Us Fda / Ce & Dcgi Approved, Biventricular Pacemaker With Atrial, Rv, Lv Leads And All Accessories Required During Imlantation • Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay • Must Have Facility For Egm Based Optimization Of Av, Pv And Vv Delays • Must Have Quadripolar Lead For Lv Pacing • Must Have Fluid Monitoring System • Must Have Facility For Active Fixation Of Lv Lead In C S ( Either Screwing Ordeployable Lobes With Anchor Mechanism ) • Must Have Mri Compatible • Company Must Quote Only The Latest Model Of Devices Commercially Available • Mri Compatible 3 Tesla , Combo Device ( Crt-D ) With Quadripolar Lv Lead And Df-1 Rv Lead Must Be 3T Full Body Mri Conditional Must Have Atleast 17 Pacing Vectors In Lv Lead Must Have Rate Responsive Feature With Mv Sensor Must Have Battery Capacity Of More Than 1.8 Ampere Hour Warranty Of Atleast 6 ( 4+2 ) Years , Biventricular Pacemaker + Icd With All Leads Us Fda / Ce & Dcgi Approved, Biventricular Pacemaker + Icd ( Combo Device ) With Atrial, Rv, Lv Leads And All Accessories Required During Imlantation • Must Have All Basic Programmable Parameters • Must Have Quadripolar Lead For Lv Pacing • Facility Of Atp During Charging For Defibrillation • Must Have Fluid Monitoring System • Must Have Separate Programmable Rv, Lv Lead Amplitude, Pulse Width And Vv Delay. • Must Have Algorithm For Af Suppression With Programmable Automatic Mode Switch Basal Rate. • Must Have Facility For Automatic Lv Only And B / V Pacing And Automatic Av, Vv Delay • The Size Of Atrial And Rv Lead Must Be Df-4 Compatible And Lv Lead Quadripolar • Must Have Mri Compatible • Company Must Quote Only The Latest Model Of Devices Commercially Available. • Mri Compatible 3 Tesla , Remote Monitoring Device With International Roaming • Must Have Automatic Hands Free Transmission For Patients • Must Have Physician Friendly Colour Coded Urgency Settings • Must Be Compatible With Standard Internet Settings • Interrogation Capabilities Should Be Compatible With In Office Follow Up • Alert Notification Should Be Available As Text Messages On Mobile • Direct Presence Of Parent Company In India ( Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept • Company Must Quote Only The Latest Model Of Devices Commercially Available , Implantable Loop Recorder • Must Be Able To Detect Asytole, Brady-Arrhythmia And Vt / Fvt • Must Have The Storage Capacity Of >45 Minutes • Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion • Must Have A Patient Tool For Symptomatic Recording • Must Have At Least 35 Months Of Longevity • Must Be Compatible With Remote Monitoring Device • Direct Presence Of Parent Company In India ( Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept • Company Must Quote Only The Latest Model Of Devices Commercially Available , Implantable Loop Recorder For Af Detection • Must Be Able To Detect Asystole, Brady-Arrhythmia And Vt / Fvt And At / Af • Must Have The Storage Capacity Of >45 Minutes • Must Have Dynamic Sensing Threshold For R Wave Sensing Along With Noise Reversion • Must Have A Patient Tool For Symptomatic Recording Along With Alerts • Must Be Able To Give Af Burden Reports To Monitor The Progress Of Chronic Af Patients • Must Have At Least 35 Months Of Longevity • Must Be Compatible With Remote Monitoring Device • Direct Presence Of Parent Company In India ( Not Only Through The Distributors ) And Company Must Provide Its Trained Technical Person For Each Implantation Whenever Required And For Follow Up Programming When It Is Required • Company Must Provide At Least One Programmer Exclusively To The Cardiology Dept • Company Must Quote Only The Latest Model Of Devices Commercially Available , Mobile Cardiac Telementry System For Arrhythmia Diagnosis • Must Have 7 Days Rhythm Monitoring With Active Life • Must Collect Ecgs Automatically For • Bradycardia And Tachycardia • Pause / Asystole • Atrial Fibrillation • Vt / Vf , Us Fda / Ce & Dcgi Approved, Biventricular Pacemaker + Icd ( Combo Device ) Without Lead , Us Fda / Ce & Dcgi Approved, Biventricular Pacemaker ( Crt ) Without Lead , Us Fda / Ce & Dcgi Approved, Aicd Dual Chamber Pacemaker Without Lead , Us Fda / Ce & Dcgi Approved, Aicd Single Chamber Pacemaker Without Lead , Us Fda / Ce & Dcgi Approved Dddr Permanent Pacemakers Without Lead , Us Fda / Ce & Dcgi Approved Vdd / Vddr Permanent Pacemakers Without Leads , Us Fda / Ce & Dcgi Approved Ddd Permanent Pacemakers Without Lead , Us Fda / Ce & Dcgi Approvedvvi Permanent Pacemakers Without Lead , Us Fda / Ce & Dcgi Approved Vvir Permanent Pacemakers Without Leads , Atrial Lead&All Accessories For Biventricular Pacemaker ( Crt ) , Us Fda / Ce & Dcgi Approved , Rv Leadall &Accessories For Biventricular Pacemaker ( Crt ) , Us Fda / Ce & Dcgi Approved , Lv Leadall &Accessories For Biventricular Pacemaker ( Crt ) , Us Fda / Ce & Dcgi Approved , Atrial Leadfor Biventricular Pacemaker + Icd ( Combo Device ) With All Accessories Required During Imlantation Us Fda / Ce & Dcgi Approved , Rv Leadfor Biventricular Pacemaker + Icd ( Combo Device ) With All Accessories Required During Imlantation Us Fda / Ce & Dcgi Approved , Lv Leadfor Biventricular Pacemaker + Icd ( Combo Device ) With All Accessories Required During Imlantation Us Fda / Ce & Dcgi Approved , Rv Lead For Aicd Single Chamber, Us Fda / Ce & Dcgi Approved , Pacing Leads For Aicd Dual Chamber, Us Fda / Ce & Dcgi Approved , Atrial Leadpacing Lead For Dddr Permanent Pacemakers Us Fda / Ce & Dcgi Approved , Ventricular Leadpacing Lead For Dddr Permanent Pacemakers Us Fda / Ce & Dcgi Approved , Atrial Leadpacing Lead For Dddpermanent Pacemakers Us Fda / Ce & Dcgi Approved , Ventricular Leadpacing Lead For Dddpermanent Pacemakers Us Fda / Ce & Dcgi Approved , Pacing Leads For Vdd / Vddr Pacemakers Us Fda / Ce & Dcgi Approved , Pacing Leads For Vvi / Vvir Pacemakersus Fda / Ce & Dcgi Approved , Epicardial Lead For Pacemakersus Fda / Ce & Dcgi Approved , Temporary Pacing Leads - Us Fda / Ce & Dcgi Approved 1. Should Be Us Fda & Dcgi Approved 2. Should Have 10 Cm Depth Markers To Enhance Placement. 3. Should Have Smooth, Polyurethane Hemocompatible Coating. 4. Should Have Clearly Marked Terminals. 5. Should Have Shrouded 2 Mm Pin Connector Leads. 6. Should Have Stainless Steel Centre Conductor And Stainless Steel Electrodes. 7. It Should Have Solid Core Enables User To Customize The Curve. 8. Should Have Optimal Torque Control For Challenging Anatomy , Temporary Pacing Leads: Balloon Floatable – Us Fda / Ce & Dcgi Approved 1. Should Be Us Fda & Dcgi Approved 2. Should Be Latex Balloon Tipped, Flow Guided For Stable Insertion. 3. Should Have 10 Cm Depth Markers To Enhance Placement. 4. Should Have Smooth, Polyurethane Hemocompatible Coating. 5. Should Have Clearly Marked Terminals. 6. Should Have Shrouded 2 Mm Pin Connector Leads. 7. Should Have Platinum Electrodes 8. It Should Have Flexible Tip Design For Delicate Placement. , Temporary Pacing Leads With Stylet - Us Fda / Ce & Dcgi Approved , Pulse Generator ( Temporary ) , Lead Extraction System Of Different Variety , Vvi / Vvir Leadless Pacemaker With All Accessories Us Fda Approved / 7Years Warranty Permanent Leadless Pacing Capsule Providing Vvi / Vvir Pacing The Weight Of The Device Should Be Less Than 2Gms And Volume Less Than 1 Cc Must Be Mri Conditional Pacemaker For Full Body Scan - 1.5T & 3T Must Have Ventricular Capture Management Should Have The Ability To Transmit Data Through Remote Moniter. , Vdd Leadless Pacemaker With All Accessories Us Fda Approved / 7 Years Warranty Permanent Leadless Pacing Capsule Providing Vvi / Vvir / Vdd Pacing The Weight Of The Device Should Be Less Than 2Gms And Volume Less Than 1 Cc Must Be Mri Conditional Pacemaker For Full Body Scan - 1.5T & 3T Must Have Ventricular Capture Management Should Have The Ability To Transmit Data Through Remote Moniter , Subcutaneous Icd 3Tesla Mri Compitable , Group I Diagnostic Ep Catheters , Deflect. Decaduapolar ( 20 Poles ) For A Flutter ---- All Diameters , Deflectable Decapolar ( 10 ) ( Pulm. Vein ) --- All Diameters , Defectable Decaduapolar ( 20 ) ( Pulm. Vein ) --- All Diameters , 2F Multipolar ( > Ten Electrodes ) For Mapping Through Coronary Vasculature , Basket Catheter With Accessory , Crista Catheter With Accessory , Other Special Ep Catheters , Pacing Catheter With Angiogrophic Capability • Variable Sizes • Bipolar Or Quadripolar With Appropriate Cable • Cvp Monitoring & Angiographic Facility , Pediatric Use : All The Above Catheters, Sheaths Etc For Pediatric Use. • Implying Smaller French Size Like 4F, 5F, With Certification For Use In Children , Pentapolar Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Octapolar Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval –- Us Fda / Ce & Dcgi Approved , 16 Pole Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , 20 Pole Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , 24 Pole Diagnostic Catheter – Fixed Curve Catheter Material – Woven Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Bi-Directional Steerable Catheters Handle- Thumb Wheel Or Push Pull Automatic Curve Lock Mechanism Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Atrial Mapping Catheters Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Dual Curve Rf Ablation Catheter Bi-Directional Steerable Electrode – Stainless Steel, Platinum, Paladium Quality Approval – - Us Fda / Ce & Dcgi Approved , Reusable Defibrillation / Transcutaneous Pacing Patches ( Suitable For Equipment In Cath Lab, Ct2, Ct3, Ct6 ) , Disposable Defibrillation / Transcutaneous Pacing Patches ( Suitable For Equipment In Cath Lab, Ct2, Ct3, Ct6 ) , Defibrillation / Transcutaneous Pacing Patches For Use In Infants And Children , Cryo Catheters ( And Accessories ) For Ablation Of Arrhythmias In Children And Adults , Intracardiac Ultrasound / Echo Catheter For Guiding Rfa Compatible With The Existing Echo Machine At Pbm Hospital, Bikaner ( Quote All Prices Of The Catheters And Accessories ) , Disposable Electrocautery Patches For Rfa , Reusable Electrocautery Patches For Rfa , Magnetic Based Patches For Electro-Anatomical Mapping For Used With Ensite Precision Mapping System. , Velocity Array Catheter , Cool Pump Cable / Tubing Set , Sheaths Used In Ep Study And Rfa Sro Sl, Azulix , Bidirectional Sensor Enabled Contact Force Catheter Compatibable With Ensite Precision System With Assorted Curve. , Irrigated Bidirectional 16 Electrode High Density Sensor Enable Mapping Catheter Compatible With Ensite Precision System , Irrigated Bidirectional Ablation Catheter For 3D Mapping With Flexible Tip And Laser Cut Technology Compatible With Ensite Mapping System. , Irrigated Bidirectional Ablation Catheter For 3D Mapping With Flexible Tip And Laser Cuttechnology Compatible With Ensite Mapping System
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 10
Rajasthan View Result →
10.
Educational and Research Institute #10502902 Price Bid
Supply Of Library Books , Library Books , Introduction To Database Management System P.K. Yadav , Database Management Systemp.K. Yadav , Concepts Of Database System P.K. Yadav , Software Project Managementrajiv Chopra , Software Testing Rajiv Chopra , Software Testing And Quality Assurance Rajiv Chopra , An Integrated Approach To Software Engineering Rajiv Chopra , Internet Of Things ( Iot ) Rajiv Chopra , Object Oriented Software Engineeringrajiv Chopra , Introduction To Microprocessor Rajiv Chopra , Requrements And Estimation Techniques Rajiv Chopra , Fundamentals Of Computing Rajiv Chopra & Rishbh Anand , An Introduction To Automata Theory & Formal Languages Adesh K. Pandey , Introd. To Automata Theory & Formal Lang.Adesh K. Pandey , Fundamentals Of Compiler Designadesh K. Pandey , Concepts Of Complier Designadesh K. Pandey , Concepts Of E-Commerceadesh K. Pandey , Internet Fundamentalsadesh K. Pandey , Network Security & Administrationadesh K. Pandey , Internet & Web Designingadesh K. Pandey &Er.Neha Dutta , Introduction To E-Commerce & Erpadesh K. Pandey , A Textbook Of Compiler Designadesh K. Pandey , Elements Of Compiler Designadesh K. Pandey , Theory Of Automata And Computationadesh K. Pandey , Theory Of Computationadesh K. Pandey , Fundamentals Of Electronics Commerce Adesh K. Pandey , Internet Programming Using Javapandey & Pandey , Fundamentals Of Computer Programming In Cs.K.Jha , System Analysis & Designs.K.Jha , Programming In Cs.K.Jha , Pc Organization S.K.Chauhan , Pc Upgrading Maintenance & Trouble Shooting Guide , Neural Network & Fuzzy Logicvinoth Kumar And R.Saravana Kr. , Soft Computingk.Vinoth Kumar , Fundamentals Of Soft Computingk.Vinoth Kumar , Computer Concepts & Programming In Camit Kumar Mishra , Basic Computer Engineeringamit Kumar Mishra , Introduction To Computer Systemamit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , A Textbook Of Computer Architecture Amit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , Computer System And Programming In C Amit Kumar Mishra , Computer Architecture & Organizationamit Kumar Mishra , Information Security And Cyber Laws Amit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , Computer Architecture Amit Kumar Mishra , Computer Programming Amit Kumar Mishra , Fundamentals Of Computer And Programming Amit Kumar Mishra , Software Engineeringbali And Bali , Fundamentals Of Software Engineeringbali And Bali , Thinking In C++ Rajesh Kocher & Sunil K. Pandey , Learn Autocadrajesh Kocher & Sunil K. Pandey , Fundamentals Of Computer Programming And Itsunil K. Pandey& V.K. Jain , Object Oriented Programing With C ++ Sunil K. Pandey& Rajesh Kochher , Programming Language Nitin Upadhyay , The Design & Analysis Of Algorithmsnitin Upadhyay , Data Structures And Algorithms Using C Nitin Upadhyay , Question Bank In Computer Sciencenitin Upadhyay, Pankaj Sharma , Computer Networks Dr. Sanjay Sharma , Elements Of Computer Networks Dr. Sanjay Sharma , Computer Networks Dr. Sanjay Sharma , A Course In Computer Networksdr. Sanjay Sharma , Introduction To Computer Networks Dr. Sanjay Sharma , Computer Networks-I Dr. Sanjay Sharma , Advanced Computer Networksdr. Sanjay Sharma , Computer Networks-Ii Dr. Sanjay Sharma , Principles Of Computer Networks Dr. Sanjay Sharma , Digital Logic Design Dr. Sanjay Sharma , A Textbook Of Computer Network Dr. Sanjay Sharma , Fundamentals Of Computer Network Dr. Sanjay Sharma , Introduction To Web Technologypankaj Sharma , Fundamentals Of Web Technologypankaj Sharma , Working With Artificial Intelligencepankaj Sharma , Web Engineering Pankaj Sharma , Manet And High Speed Networkspankaj Sharma , Computer Organization Pankaj Sharma , Computer Architecture & Organizationpankaj Sharma , System Programmingpankaj Sharma , Expert System Pankaj Sharma , Information Security & Cyber Lawspankaj Sharma , System Programming & System Admin. Pankaj Sharma , Rapid Application Devlop.Using Visual Basic & Visual C++Pankaj Sharma , Parallel Algorithms Pankaj Sharma , Pattern Recognitionpankaj Sharma , Web Developmentpankaj Sharma , Information Storage & Managementpankaj Sharma , Web Engineering Pankaj Sharma , System Administration Pankaj Sharma , Information Security Pankaj Sharma , Cloud Computing Pankaj Sharma , Introduction To Web Engineering Pankaj Sharma , Web Administration Pankaj Sharma , Dot Net Framework With C# Programming Dr. Lalit Arora , Object Oriented System With C++ Dr. Lalit Arora , Object Oriented System With Javadr. Lalit Arora , Internet & Javadr. Lalit Arora , C# Using .Net Frameworkdr. Lalit Arora , Java Programming & Web Site Designdr. Lalit Arora , Object Oriented Techniques Java Dr. Lalit Arora , Object Oriented Programing Using C ++Dr. Lalit Arora , It Skills And Technology Dr. Lalit Arora , Concept Of Programming And Oopsdr. Lalit Arora, Dr. Raj Kumar & Dr. Anjali , Computer Organization & Architecture Dr. Lalit Arora, Dr. Raj Kumar & Dr. Anjali , Computer Graphicsudit Agarwal , Introduction To Computer Graphicsudit Agarwal , Data Structures Using C Udit Agarwal , Data Structures Udit Agarwal , Software Engineeringudit Agarwal , Distributed Systems Udit Agarwal , Distributed Computing Udit Agarwal , Data Mining And Data Warehousingudit Agarwal , Computer Graphics And Multimedia Udit Agarwal , Programming For Problem Solving Udit Agarwal , Operating Systemvijay Shukla , Multimedia System, Technology & Communication Sujata Pandey , Data Mining & Data Ware Housing , Network Programmingkadambri Agarwal , Programming Languages Kadambri Agarwal , Network Technologykadambri Agarwal , System Network Administration Kadambri Agarwal , Graph Theoryk.Patrai , Discrete Structures & Graph Theoryk.Patrai , Mobile Computingvishnu Sharma , Advances Mobile Computingvishnu Sharma , A Course In Electrical Technologyj.B Gupta , A Course In Electrical Technology-Ij.B Gupta , A Course In Electrical Technology-Iij.B Gupta , A Course In Electrical Technology-Iiij.B Gupta , Generation & Economic Considerationsj.B Gupta , A Course In Electrical Powerj.B Gupta , A Course In Power Systems J.B Gupta , Theory & Performance Of Electrical Machinej.B Gupta , Utilization Of Electric Power & Electric Tractionj.B Gupta , Utilization Of Electrical Energy And Traction J.B.Gupta, R. Manglik, R. Manglik , Switchgear & Protectionj.B Gupta , A Course In Electrical Installation Estimating & Costingj.B Gupta , Fundamentals Of Electrical & Electronics Engineering J.B Gupta , Transmission & Distribution Of Electrical Powerj.B Gupta , Basic Electrical Engineeringj.B Gupta , Basic Electricity J.B Gupta , Electrical Measurements & Measuring Instrumentsj.B Gupta , Electrical Machines-Ij.B Gupta , Electrical Machine - Iij.B Gupta , An Integrated Course In Electrical Engineering J.B Gupta , Explanation / Solutions To An Integrated Course In Electrical Engineering J.B Gupta , An Integrated Course In Electrical Engineering Volume I J.B Gupta , An Integrated Course In Electrical Engineering Volume Ii J.B Gupta , Question Bank In Electrical Engineeringj.B Gupta , Question Bank In Electrical Engineering Volume I J.B Gupta , Question Bank In Electrical Engineering Volume Ii J.B Gupta , A Text Book Of Electrical Engineeringj.B Gupta , Electrical Science J.B Gupta , Electromechanical Energy Conversionj.B Gupta , Electromechanical Energy Conversion- Ij.B Gupta , Electromechanical Energy Conversion- Iij.B Gupta , Electrical Machines ( Ac, Dc Machine ) J.B Gupta , A Text Book Of Electrical Technologyj.B Gupta , Electrical Machines & Automatic Controlj.B Gupta & Hasan , Elements Of Power Systems J.B Gupta , Power System Analysis J.B Gupta , Fundamentals Of Switchgear & Protectionj.B Gupta , Electrical Engineering Materials & Semiconductor Devices J.B Gupta , Basic Electrical & Electronics Engineering J.B Gupta , Electrical Machines-Ij.B Gupta , Electrical Machines-Ii J.B Gupta , Electrical Technologyj.B Gupta , Basic Electrical Engineeringj.B Gupta , Fundamentals Of Electrical Engineering J.B Gupta , Elements Of Electrical Engineering J.B Gupta , Basic Electrical Engineering J.B Gupta , A Textbook Of Electrical Science J.B Gupta , A Textbook Of Electrical Engineering Rajeev Manglik , Power System & Protectionn.K.Datta , Theory & Performance Of Electrical Machine Design Dr. N.K.Datta , Principles Of Electrical Machine Designr.K. Agarwal , Electrical Engineering Materialsrakesh Dogra , Electrical Engineering Drawing-Isurjit Singh , Electrical Engineering Drawing-Iisurjit Singh , Electrical Measurements & Measuring Instrumentsm.L.Anand , Basic Electrical Engineeringtarlok Singh , Installation Commissioning & Maintain. Of Elect. Equip.Tarlok Singh , Electrical Measurement & Measuring Instrumentstarlok Singh , Elements Of Electrical & Electronics Engineering Tarlok Singh , Utilization Of Electric Energytarlok Singh , Electrical Machine-Itarlok Singh , Electrical Machine-Iitarlok Singh , Electrical Power-Iitarlok Singh , Fundamentals Of Electrical Engineering Tarlok Singh , Electrical Science Tarlok Singh , Transmission & Distributiontarlok Singh , Modern Electric Traction Tarlok Singh , Energy Managementdr. Sanjeev Singh, Umesh Rathore , Basic Instrumentation System & Programmable Logic Controllerumesh Rathore , Industrial Instrumentationumesh Rathore , Programmable Logic Controller And Microcontrollers Umesh Rathore , A Textbook Of Electrical Workshop Practices Umesh Rathore, Naresh Kumar Sharma , A Textbook Of Energy Science & Engineering Umesh Rathore , Fundamentals Of Managementdr. R.C.Bhatia , Sub-Station Engineering Design, Concepts & Computer Applications Er. R.S.Dahiya , An Introduction To Electric Traction Sachidananda Mallik & Rupali G. Nazar , Fundamentals Of Managementrenu Rana , Special Electrical Machines Simmi P Burman , High Voltage Engineering Simmi P Burman & Nikita Gupta , Electrical Engineering Laboratory Practice P. Tiwari & S. Sairola , Ehv-Ac, Hvdc Transmission And Distribution Engineering Sanjay Kumar Sharma , Basic System Analysissyed Hasan Saeed & Faizan Arif Khan , Power Quality Simmi P. Burman & Bipin Singh , Scada And Energy Management System Er. Tanuj Kumar Bisht , Computer Aided Design Of Electrical Machines V.K. Maurya, Ritu Raj Jallan, Shasya Shukla , A Textbook Of Power System Operation And Control K. Nisha , Electromagnetic Field Theory Syed Hasan Saeed & Faizan Arif Khan , Installation Maintenance And Repair Of Electrical Machines And Equipments Madhvi Gupta , Electrical Engnineering Design, Drawing & Estimation Madhvi Gupta, Ankit Agarwal , Control Systems S.P. Meher , Fundamentals Of Smart Grid Technology Bharat Modi, Anu Prakash & Yogesh Kumar , Electric Vehicle Dr. Nitesh Tiwari , Ssc-Je-Question Bank In Electrical Engineering J.B.Gupta , Ace Academy Gate 2024 Ace Publication , Gate / Ese / Psus Electrical Handbook Ace Publication , Ace Academy Ese Vol 1And Vol 2 Ace Publication , Yct Electrical Engineering Je-Vol And Vol 2 Yct Publications , Yct Electrical Engineering Ae-Vol And Vol 2 Yct Publications , Basic Electrical Engineering Vol 1S Chand Publication, B L Theraja , Ac & Dc Machine Vol 2 S Chand Publication, B L Theraja , Transmission And Distribution Utilisation S Chand Publication, B L Theraja , Electronics Devices And Circuits S Chand Publication, B L Theraja , Power Electronics Khanna Publications, Dr. Ps Bhimbra , Fundamentals Of Electrical Circuits Mc Graw Hill, Charles K.Alexander , Objective Electrical Technology V.K.Mehta, Rohit Mehta , Principles Of Power System V.K.Mehta, Rohit Mehta , Principles Of Electrical Machines V.K.Mehta, Rohit Mehta , Control Of Machines New Age International , Sk Bhattacharya , Linear Integrated Circuits New Age International , Sk Bhattacharya , Programmable Logic Controllerpearson, John.R.Hackworth , Principles Of Electromagnetics Oxford, Sadiku & Kulkarni , A Course In Electrical & Electronics Measurements And Instrumentation Dhanpat Raj & Co , A K Sawhney , Fundamentals Of Digital Circuits Phi, A.Anand Kumar , Power Electronics Devices Circuits And Applicationpearson, Muhammad H. Rashid , Electrical Power System C.L.Wadhwa, New Age International , Modern Power System Analysis Mc Graw Hill, D.P.Kothari , Electrical Machinery Khanna Publications, Dr. Ps Bhimbra , Generalized Theory Of Electrical Machines Khanna Publications, Dr. Ps Bhimbra , Electronics Devices And Circuits S.Salivahanan, Mc Graw Hill , Micro Controller Principles And Applications Ajit Pal, Eastern Economy Edition , Power Plant Engineering Mc Graw Hill, P K Nag , Power System Engineering Lp, R.K.Rajput , Non Conventional Energy G D Rai, Khanna Publication , Basic Electrical And Electronics Engineering Mc Graw Hill, D.P.Kothari , Repair And Maintenance Bpb Publications, Shashi Bhushan Sinha , Electrical Applications Haynes , Electronic Devices And Circuitsj.B.Gupta , Basic Electrical And Electronics Engineeringj.B.Gupta , Linear Integrated Circuitsj.B.Gupta , Fundamentals Of Analog Electronicsj.B.Gupta , Basic Electronics J.B.Gupta , Electrical & Electronics Engineering J.B.Gupta , A Textbook Of Basic Electronics J.B.Gupta, Rajeev Manglik, Rohit Manglik , Analog Devices And Circuits J.B.Gupta , Fundamentals Of Electronics Devices & Circuits J.B.Gupta , Electronic Devices & Circuits Dr. Sanjay Sharma , Analog & Digital Electronicsdr. Sanjay Sharma , Signal & Systemsdr. Sanjay Sharma , Digital Signal Processing Dr. Sanjay Sharma , Electronics Circuits Dr. Sanjay Sharma , Digital Electronics Dr. Sanjay Sharma , Digital Communications Dr. Sanjay Sharma , Fundamentals Of Electronic Devicesdr. Sanjay Sharma , Digital Communication Dr. Sanjay Sharma , Digital Signal Processing Dr. Sanjay Sharma , Principle Of Digital Signal Processingdr. Sanjay Sharma , Analog & Digital Communication Dr. Sanjay Sharma , Signal & System Dr. Sanjay Sharma , Fundamentals Of Communication Engineering Dr. Sanjay Sharma , Communication Engineeringdr. Sanjay Sharma , Digital Electronics And Logic Design Dr. Sanjay Sharma , Digital Circuits & Systems Dr. Sanjay Sharma , Wireless Communication Systems Dr. Sanjay Sharma , Electronic Circuits Dr. Sanjay Sharma , Digital Electronics & Design Aspects Dr. Sanjay Sharma , Electronic Devices Dr. Sanjay Sharma , Signals & Systems Dr. Sanjay Sharma , Digital Design Dr. Sanjay Sharma , Analog And Digital Electronics Dr. Sanjay Sharma , A Textbook Of Electronics Engineering Dr. Sanjay Sharma , Fundamentals Of Digital Electronics Dr. Sanjay Sharma , Fundamentals Of Digital Image Processing Dr. Sanjay Sharma , Digital Image Processing Dr. Sanjay Sharma , Wireless Communication System Dr. Sanjay Sharma , Mobile Computing Dr. Sanjay Sharma , Switching Theory And Logic Design Dr. Sanjay Sharma , Essentials Of Computer Networks Dr. Sanjay Sharma , Data And Computer Communications Dr. Sanjay Sharma , Fundamentals Of Switching Theory & Logic Design Dr. Sanjay Sharma , Essentials Of Analog Communication Dr. Sanjay Sharma , Data Communication And Computer Networks Dr. Sanjay Sharma , A Textbook Of Data Communication And Networks Dr. Sanjay Sharma , Essentials Of Wireless Communication Dr. Sanjay Sharma , Fundamentals Of Electronics Engineering Dr. Sanjay Sharma , Wireless Communicationsdr. Sanjay Sharma , Electronic Devices & Circuits Dr. Sanjay Sharma , Fundamentals Of Digital Signal Processing Dr. Sanjay Sharma , Fundamentals Of Analog Communication Dr. Sanjay Sharma , A Textbook Of Signals & Systems Dr. Sanjay Sharma , Solid State Devices & Circuits Dr. Sanjay Sharma , Electronics-I Dr. Sanjay Sharma , Signal Processing And Linear Systems Dr. Sanjay Sharma , Emerging Domain In Electronics Engineering Dr. Sanjay Sharma , Circuits & Systemsk.M.Soni , Circuit Analysis And Synthesis K.M.Soni , Advanced Control Systemsk.M.Soni , Network Analysis & Systhesisk.M.Soni , Network Analysisk.M.Soni , Network Theory K.M.Soni , Fundamentals Of Network Analysis & Synthesis K.M.Soni , Basic System Analysisk.M.Soni , Signals And Systems K.M.Soni , Digital Electronicsb.R.Gupta And V.Singhal , Consumer Electronicsb.R.Gupta , Power Electronicsb.R.Gupta And V.Singhal , Introduction To Electric Drivesb.R.Gupta And V.Singhal , Question Bank Electronics & Communicationengineeringb.R.Gupta And V.Singhal , Fundamentals Of Electric Drives And Control B.R.Gupta And V.Singhal , Industrial Electronics & Instrumentationsunil Kumar , Optical Fiber Communicationsapna Katiyar , Satellite Communicationsapna Katiyar , Advanced Communication Systemsapna Katiyar , Electronic Switchingsapna Katiyar , Introduction To Optical Communicationsapna Katiyar , Telecommunication Networkssapna Katiyar , Fundamentals Of Optical Fiber Communicationsapna Katiyar , A Textbook Of Optical Fiber Communication Systems Sapna Katiyar , Introduction To Satellite Communcation Sapna Katiyar , Tv And Satellite Communications Sapna Katiyar , Vlsi ( Technology, Design & Basics Of Microelectronics ) Sapna Katiyar , 8051 Microcontroller & Embedded Systemsampath K. Venkatesh , Digital Circuit System Using Vhdlneelu Chaudhary And Shipra Gupta , Digital Logic & Design Pratima Manhas And Shaveta Thakral , Digital Electronicspratima Manhas And Shaveta Thakral , Vlsi Design Pratima Manhas & Shaveta Thakral , Introduction To Microprocessors & Interfacingaashutosh Gupta , Electromagnetic Fields & Wavesr.Gowri , Wireless Communicationaman Kundra And Amrita Sandhu , Trouble Shooting & Maintenance Of Elect. Equipmentsk.Sudeep Singh , Fundamentals Of Television & Radar Engineering K.K Sharma , Fundamentals Of Radar, Sonar & Navigation Engineering K.K Sharma , Fundamentals Of Data Communicationk.K Sharma , Digital & Analog Communicationk.K Sharma , Microwave & Radar Engineeringk.K Sharma , Antenna & Wave Propagation A.K.Gautam , Principle Of Communication Engineering A.K.Gautam , Communication System-Ia.K.Gautam , Microwave Engineering A.K.Gautam , Control System Hasan Saeed , Digital & Analog Communicationbrijesh Verma , Mobile Communicationbrijesh Verma , Telemetry & Data Transmissionr.N.Baral , Electronics Devices & Circuits-I M.L.Anand , Bio-Medical Signal Processing Rakesh Kumar , Medical Electronics O.N. Pandey & Rakesh Kr. , Instrumentation And Process Control O.N. Pandey , Electromagnetic Field Theory Parul Dawar , Digital Circuit And Systems Shipra Gupta , Vlsi Designc.P Verma , Introduction To Vlsi Circuits & Systems Deepak Garg , Vlsi Technology Deepak Garg , Fundamentals Of Vlsi Design Deepak Garg , Basics Of Vlsi Design With Vhdl Deepak Garg , Microprocessor & Interfacingn. Marriwala , Embedded System Design N. Marriwala & Ritu Khullar , Fundamentals Of Radar & Navigation Sachin Gupta , Optical Communication Sachin Gupta , Microwave And Radar Engineeringravi Garg & Ankaj Gupta , Antenna And Wave Propagation Prashant Pandey , Digital Electronics Preeti Sehrawat , Electronic Circuits M. Elangovan , Electromagnetics And Antennas H. Singh , Optoelectronics & Optical Communication Satyajit Das , Control Systems Engineering Dr. S. Panda, S. Padhy & S.R. Das , Microcontroller And Embedded Systems Ankaj Gupta , Microprocessors And Microcontrollers Ankaj Gupta , Fundamentals Of Microprocessors And Embedded Systems Ankaj Gupta , Microprocessors Shweta Goyal & Swati Gargust , Industrial Electronics And Control Of Drives Shweta Goyal & Swati Gargust , Engineering Economics And Industrial Management Dr. R.K. Singal & Er. Rishi Singal , Microwave & Radar Engineering Er. Rajesh Dhiman , Embedded Systems Anurag Arora , Wireless Sensor Networks Sunil Gupta & Dr. Harsh K. Verma , Probability, Random Variables And Stochastic Methods Himanshu Chaurasiya & Dr. K.M. Soni , Relational Database Management System Pooja Sharma & D.S. Sehrawat , Semiconductor Devices And Circuits C.S. Murlidharan Sharma , Industrial Power Electronics Partha K. Ganguly , An Insight To Matlab & Simulink Dr. Shailender Gupta & Bharat Bhushan , Fundamentals Of Optical Communication & Networks Shila Ghosh, Somali Sikder , Digital Image Processing Ketki Kshirsagar, Rajeshree Shinde , Embedded System & Microcontroller Manish Verma & K.B. Singh , Electronic Design Automation & Logic Synthesissarita Chauhan , Artificial Intelligence For Engineers Malvika Gupta, Medha Malik , Principles Of Electronics Dr. S.K. Bhattacharya , Machine Learning Dr. Himanshu Sharma , Strength Of Materials R.S.Khurmi S.Chand & Company Ltd, New Delhi , Strength Of Materials S.Ramamirtham Dhanpat Rai , Engineering Mechanics R K Bansal Laxmi Publications Pvt.Ltd. , Building Materials P.C.Varghese Prentice-Hall Of India ( P ) Ltd., I Edition , Building Construction Dr. B.C. Punmia Laxmi Publications ( P ) Ltd New Delhi. , Building Construction S.C.Rangwala Charotar Publishing House, Vii Edition , Surveying Volume I Punmia.B.C. Ashok K.Jain & Arun K. Jain Lami Publications Private Limited, 16Th Edition , Surveying Volume Ii & Iii Punmia.B.C, Ashok Jain & Arun K. Jain Lami, Publications Private Limited., 15 Th Edition, , Fundamentals Of Surveying S. K. Roy Phi Learning Private Limited , Building Planning And Drawing Dr.N.Kumaraswamy Charotor Publishing House , Building Planning And Construction G. Vaidhyanathan, I. Kulasekaran, G. Sathish Kumar , A Guide To Civil Engineering Drawing V.R.Thothathri , Theory Of Structures S. Ramamrutham Dhanpat Rai Publications, New Delhi , Theory Of Structures B.C. Punmia, Ashok Jain & Arun Jain Laxmi Publications , Analysis Of Structures V.N. Vazirani & M.M. Ratwani , Fluid Mechanics R.K. Bansal Lakshmi Publications , Hydraulics, Fluid Mechanics And Hydraulics Machines S. Ramamirtham Dhanpat Rai & Sons, New Delhi , Hydraulics, Fluid Mechanics And Hydraulics Machines K.R. Arora Standard Publishers & Distributors, New Delhi , Highway Engineering S.K.Khanna And C.E.G Justo Nem Chand And Bros, Roorkee. , Highway Engineering Rangwala Charotor Publishing House Pvt. Ltd , A Text Book Of Transportation Engineering S P Chandola S Chand & Company Ltd , Bridge Engineering Rangawala Charotor Publishing House , Reinforced Concrete Design N Krishnaraju New Age International Publications, 2012 , Is 456-2000 , Steel Structures Hand Book Sp16 , Limit State Design Of Reinforced Concrete B C Punmia Laxmi Publications, 2007 , Design Of R C C And Structural Elements ( Rcc Vol I ) S S Bhavikatti, New Age International Publications, 2011 , Environmental Engineering B C Punmia Lami Publications, 2010 , Waste Water Engineering B C Punmia , Laxmi Publications, 2010 , Environmental Engineering A.Kamala, D.L.Kanthraotata Mcgraw Hill Publishing Company Ltd., New Delhi , Concrete Technologym.S. Shetty S.Chand & Company Pvt. Ltd. New Delhi. , Soil Mechanics And Foundation Engineering B C Punmia Laxmi Publications ( P ) Ltd., 2005 , Civil Engineering Drawings.C. Rangwala Charotor Publishing House , Construction Management Sanga Reddy. S Kumaran Publications, Coimbatore , Steel Structures Dr.Subramaniam , Town Planning S.C. Rangwala , Principles And Practice Of Town And Country Planninglewis B. Keeble Estates Gazette, University Of Michigan, 2010 , Estimating & Costing L.N.Dutta Dhanpat Rai & Sons , Estimating & Costingrangawala , Charotor Publishing , Quantity Surveying & Valuation N.A.Shaw Khanna Publishers; , Civil Engineering Competitionsbooks R.Agor Khanna Publishers; , Civil Engineering ( Objective Type ) P Jaya Rami Reddy , Laxmi Publications , Reinforced Concrete Design S.Unnikrishna Pilla & Devadas Menon, Mc Graw Hill Publications , Limit State Design Of Steel Structures S K Duggal , Mc Graw Hill Publications , Basic And Applied Soil Mechanics , Gopal Ranjan & A S R Rao, New Age International Publications , Fluid Mechanics And Fluid Power Engineering Dr. D.S Kumar , Basics Of Mechanical Engineering Dr. D.S Kumar , Mechanical Engineering ( Objectives ) Dr. D.S Kumar , Refrigration And Air Conditioner Dr. D.S Kumar , Total Quality Management Dr.K.C.Arora , Engineering Drawing , Ps Gill , Textbook Of Machine Drawing, Ps Gill , Geomatric Dimensioning And Tolerancing , Ps Gill , Computer Aided Drafting Using Autocad , Ps Gill , Learning Autocad , Ps Gill , Auto Cad 2D Design Fundamentals , Ps Gill , Auto Cad 3D Models Fundamentals Ps Gill , Operation Research , Ap Verma , Textbook Of Industrial Management , Ap Verma & N.Mohan , Industrial Engineering And Management , Ap Verma , Stem Tables Rk Singal , Manufacturing Practices ( Workshop Practices ) Rk Singal , Engineering Metrology And Instrumention , Rk Rajput , Strength Of Materials , Rk Rajput , Textbook Of Material Science , Callister , Workshop Technology , Virendra Narula , Manufacturing Process , Virendra Narula , An Intoduction To Nc And Cnc , S.Vishal , Computer Aided Manufacturing, S.Vishal , Automobile Engineering , Km Moeed , Manufacturing Process I Sandy Khippal , Manufacturing Process Ii Sandy Khippal , Principals Of Powder Meatallurgy , Ps Gill , Inspection And Quality Control, Ap Verma , Automation Of Robotics, Khushdeep Goyal , Industrial Automation And Robotics, Khushdeep Goyal , Cnc Machines And Automation , Khushdeep Goyal , Production Planing And Control , Rk Singal , Theroy Of Machines , Rk Singal , Data Book For Designing Machine Elements , Arunkumar , Entreprenurship Development, Ranbirsingh , Unconventional Manufacturing Process , Rahul Jain , Mechanics Of Solids , Timoshenko , Engineering Mechanics , Timoshenko , Mechanics Of Solids , Egor P Popov , Fluid Mechanics And Fluid Power Engineering, Frank M White , Matlab For Dummies , John Mueller , Machine Learning For Dummies , John Mueller , Thermodynamics , Cengel , The Functional Aspects Of Communication Skills, Dr. P. Prasad , Professional Communication, Dr. P. Prasad , Universal English ( In The Twenty-First Century ) Dr. P. Prasad , Effectual Communication Skills , Bhupender Kaur , Engineering Physics, Dr. Abhijit Nayak , Essentials Of Physicsdr. Rakesh Dogra , Engineering Physics ( Aicte ) Dr. Rakesh Dogra , Applied Physics- Imanpreet Singh , Applied Physics -Iimanpreet Singh , Laser Systems & Applications, Dr. Rajesh Mishra , Engineering Physics-I, Dr. Rajesh Mishra , Fundamentals Of Polymer Science & Technology, Anshu Srivastava & Shakun Srivastava , Nuclear Science, Chanchal Garg , Petrochemicals, Anjana Srivastava , Impact Of Science Technology On Society, Ishwar Singh , Introduction To Bioscience , Dr. O.N. Pandey , Introduction To Bioscience Sweety Israni , A Textbook Of Nanoscience , Dr. Rakesh Kumar & Dr. Kamala Pati Tiwary , Professional Communicationdr. Raavee Tripathi , Technical Writing , Dr. O.N. Pandey , Engineering Economics , Dr. O.N. Pandey , Numerical Analysis Dr. Surbhi Gupta & Dr. Abhilasha Sharma , Business Environment , Anita Sengar , Numerical Methods , Girish Nayyar , Human Values And Professional Ethics , Smriti Srivastava , Discrete Mathematical Structures , Adesh K. Pandey & Rakesh Dube , Effective Technical Communication , Dr. Bharti Kukerja, Dr. Anupama Jain , Human Behaviour , Dr. Amit Jain , Organisational Behaviour , Er. Ishwar Singh, Dr. Bratpal Singh , Universal Human Values And Professional Ethics , Dr. Ritu Soryan , Soft Skills , Dr. Ritu Soryan , Communication Skills, Dr. Ritu Soryan , Constitution Of India , Richa Chaudhary, Arunima Mishra, Imran Khan , Concise Engineering Physics , Dr. Shiva Kant Pathak , Discrete Mathematicsanjana Gupta , Discrete Structures, Adesh K. Pandey , Discrete Structure, Kalika Patrai , Applied Mathematics- I, Dr. Hari Arora , Applied Mathematics- Ii, Anita Sachdeva & Hari Arora , Applied Mathematics- I, Dr. J.S.Bindra And K.S.Gill , Applied Mathematics- Ii, Dr. J.S.Bindra And K.S.Gill , Applied Mathematics- Iii, Dr. J.S.Bindra And K.S.Gill , Elements Of Engineering Mathematics- I Dr. V.P. Mishra , Elements Of Engineering Mathematics- Ii, Mishra & Mishra , Elements Of Engineering Mathematics- Iii, Mishra & Mishra , Engineering Mathematics-I , Mishra & Mishra , Question Bank In Engineering Mathematics , Mishra & Mishra , A Textbook Of Applied Mathematics-I, Dr. Hari Arora , A Textbook Of Applied Mathematics-Ii , Dr. Hari Arora , A Textbook Of Applied Mathematics-Iii , Dr. Hari Arora , A Textbook Of Applied Mathematics-Iv , Dr. Hari Arora , A Textbook Of Engineering Mathematics-Ii , Dr. Hari Arora , A Textbook Of Engineering Mathematics-I ( Calculus & Linear Algebra ) , Dr. Hari Arora , Applied Mathematics-Ii ( Previous Year Papers ) Dr. Hari Arora , Numerical Methods And Optimization Dr. Hari Arora , Probability & Statistics Dr. Hari Arora , Differential Equations And Complex Analysis Dr. Hari Arora , Numerical Methods For Engineers And Scientists Dr. Hari Arora , Engineering Mathematics-Iii Amit Gupta , Mathematics ( Cbse ) ( Class - Ix ) Upadhyay & Upadhyay , Mathematics ( Cbse ) ( Class - X ) Upadhyay & Upadhyay , Mathematics ( Cbse ) ( Class - Xi ) Upadhyay & Upadhyay , Mathematics For Mechanical Engineering ( A Solution Manual ) Salman Hussien Omran, Laith Jaffer Habeeb , A Textbook Of Finite Element Method , Pushpam Kumar Sinha , Engineering Chemistry , Dr. Sunita Rattan , Engineering Chemistry With Experiments , Dr. Sunita Rattan , Comprehensive Engineering Chemistry, Dr. Sunita Rattan , Experiments In Applied Chemistry , Dr. Sunita Rattan , Theory & Practical Of Engineering Chemistry, Dr. Sunita Rattan , A Textbook Of Engineering Chemistry , Dr. Sunita Rattan , Engineering Chemistry ( With Experiments ) , Dr. Sunita Rattan , Applied Chemistry- I, Dr. Raman Rani Mittal , Applied Chemistry- Ii, Dr. Raman Rani Mittal , Engineering Chemistry, Dr. Renu Gupta , New Course Engineering Chemistry, Dr. S.K. Bhasin , New Course Engineering Chemistry , Dr. S.K. Bhasin , Realm Of Space Science , Rajeev Garg , A Textbook Of Engineering Chemistry , Dr. Sunita Rattan , A Textbook Of Engineering Chemistry , Dr. Rajshree Khare , Applied Physics ( Theory & Experiments ) , Ritika Sorot Chauhan, Kavindar Tiwari , Applied Chemistry ( Theory & Experiments ) , Dr. Babita Bhardwaj , Junior English Revised , Haydn Richards => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Tamil Nadu View Result →
11.
Public Administrative Department #10379186 Price Bid
Supply, Installation, Testing, Commissioning And Maintenance For Cctv Camera Surveillance System And Integrated Command Control ( Iccc ) Surveillance System For Palghar Muncipal Conucil Area 58 Cameras And 3 Year Amc ( Semi-Comprehensive Service And M , Supply, Installation, Testing, Commissioning And Maintenance For Cctv Camera Surveillance System Andintegrated Command Control ( Iccc ) Surveillance System For Palghar Muncipal Conucil Area 58 Cameras And 3 Year Amc ( Semi-Comprehensive Service And Maintenance Contract 3 Years ) . Palghar. , Supply, Installation, Testing & Commisioning Of 5Mp Bullet Camera Image Sensor 1 / 2.9 Progressive Scan Cmos Min. Illumination Color: 0.01 Lux @ ( F1.2, Agc On ) , 0.028 Lux @ ( F2.0, Agc On ) , 0 Lux With Ir Shutter Speed 1 / 3 S To 1 / 100, 000 S Slow Shutter Yes Day & Night Ir Cut Filter Digital Noise Reduction 3D Dnr Wdr 120Db 3-Axis Adjustment Pan: 0° To 360°, Tilt: 0° To 100°, Rotate: 0° To 360° Focal Length 2.8 / 4 / 6 / 8 Mm Aperture F2.0 Focus Fixed Fov 2.8 Mm, Horizontal Fov: 97°, Vertical Fov: 63°, Diagonal Fov: 120° 4 Mm, Horizontal Fov: 78°, Vertical Fov: 50°, Diagonal Fov: 97° 6 Mm, Horizontal Fov: 60°, Vertical Fov: 39°, Diag Onal Fov: 75° 8 Mm, Horizo Ntal Fov: 39.5°, Vertical Fov: 26°, Diagon Al Fov: 48° Lens Mount M12 Ir Range Min 50 M Wavelength 850Nm Video Compression Main Stream: H.265 / H.264 Sub-Stream: H.265 / H. 264 / Mjpeg Third Stream: H.265 / H.264 H.264 Type Main Profile / High Profile H.264+ Main Stream Supports H.265 Type Main Profile H.265+ Main Stream Supports Video Bit Rate 32 Kbps To 16 Mbps. Smart Event Line Crossing Detection, Intrusion Detection, Face Detection Basic Event Motion Detection, Video Tampering Alarm, Exception ( Network Disconnected, Ip Address Conflict, Illegal Login, Hdd Full, Hdd Error ) Linkage Method Trigger Recording: Memory Card, Network Storage, Pre-Record And Post-Record Trigger Captured Pictures Uploading: Ftp, Http, Nas, Email Trigger Notification: Http, Isapi, Email Region Of Interest Support 1 Fixed Region For Main Stream And Sub-Stream Max. Resolution, 25 Fps In All Resolution 30Fps ( 2560 × 1440, 1920 × 1080, 1280 ×720 ) Sub-Stream 50Hz: 25Fps ( 640 × 480, 640 × 360, 320 × 240 ) 60Hz: 30Fps ( 640 × 480, 640 × 360, 320 × 240 ) Third Stream 50Hz: 25Fps ( 1280 × 720, 640 × 360, 352 × 288 ) 60Hz: 30Fps ( 1280 × 720, 640 × 360, 352 × 240 ) Image Enhancement Blc / 3D Dnr / Hlc Image Setting Rotate Mode, Saturation, Brightness, Contrast, Sharpness, Agc, And White Balance Are Adjustable Byclient Software Or Web Browser Target Cropping No Day / Night Switch Day / Night / Auto / Schedule Network Storage Support Micro Sd / Sdhc / Sdxc Card ( 128G ) , Local Storage And Nas ( Nfs, Smb / Cifs ) , Anr Protocols Tcp / Ip, Udp, Icmp, Http, Https, Ftp, Dhcp, Dns, Ddns, Rtp, Rtsp, Rtcp, Pppoe, Ntp, Upnp, Smtp, Snmp, Igmp, 802.1X, Qos, Ipv6, Udp, Ssl / Tls General Function Anti-Flicker, Three Streams, Heartbeat, Mirror, Privacy Masks, Password Reset Via E-Mail, Pixel Counter, Http Listening Security Password Protection, Complicated Password, Https Encryption, 802.1X Authentication ( Eap-Tls 1.2, Eap-Leap, Eap-Md5 ) , Watermark, Ip Address Filter, Basic And Digest Authentication For Http / Https, Wsse And Digest Authentication For Onvif, Tls1.2Api Onvif ( Profile S, Profile G, Profile T ) , Isapi, Sdk Simultaneous Live View Up To 6 Channels User / Host Up To 32 Users 3 Levels: Video Output No Communication Interface 1 Rj45 10M / 100M Self-Adaptive Ethernet Port On-Board Storage Built-In Microsd / Sdhc / Sdxc Slot, Up To 128 Gb Svc H.264 And H.265 Encoding Support Reset Button Yes Operating Conditions -30 °C To +60 °C ( -22 °F To +140 °F ) , Humidity 95% Or Less ( Non-Condensing ) Power Supply 12 Vdc ± 25%, F 5.5Mm Coaxial Power Plug Poe ( 802.3Af, Class 3 ) Power Consumption And Current :12 Vdc, 0.6 A, Max. 7 W Poe: ( 802.3Af, 36 V To 57 V ) , 0.3 A To 0.2 A, Max. 8.5 W Max. 12 W Protection Level Ip67. Warranty Of 1 Year. , Supply, Installation, Testing & Commisioning.Of 5Mp Bullet Camera. Image Sensor-1 / 2.7 Cmos, Max. Resolution-2592 ( H ) × 1944 ( V ) , Rom-128 Mb, Ram-512 Mb, Scanning System Progressive Electronic Shutter Speed Auto / Manual 1 / 3 S–1 / 100, 000 S Min. Illumination 0.005 [email protected] ( Color, 30 Ire ) 0.0005 [email protected] ( B / W, 30 Ire ) 0 Lux ( Illuminator On ) S / N Ratio>56 Db Illumination Distance-60 M ( 196.85 Ft ) ( Ir Led ) Illuminator On / Off Control Auto;Manual Illuminator Number 4 ( Ir Led ) , Pan / Tilt / Rotation Range Pan: 0°–360° Tilt: 0°–75° Rotation: 0°–360° Lens Type Motorized Vari-Focal Lens Mount F14 Focal Length-2.7 Mm–13.5 Mm, Max. Aperture-F1.5 Field Of View H: 100°–30° V: 72° –23° D: 134° –38° Iris Control-Fixed Close Focus Dista Nce-0.8 M ( 2.62 Ft ) Dori Distance Lens Detect Observe Recognize Identify W 64.4 M ( 211.29 Ft ) 25.8 M ( 84.65 Ft ) 12.9 M ( 42.32 Ft ) 6.4 M ( 21.00 Ft ) T221.4 M ( 726.37 Ft ) 88.6 M ( 290.68 Ft ) 44.3 M ( 145.34 Ft ) 22.1 M ( 72.51 Ft ) Ivs ( Perimeter Protection ) Tripwire; Intrusion ( The Two Functions Support The Classification And Accurate Detection Of Vehicle And Human ) Smart Search-Work Together With Smart Nvr To Perform Refine Intelligent Search, Event Extraction And Merging To Event Videos.Video Compression 25 Fps In All Resolution Bit Rate Control Cbr / Vbr Video Bit Rate H.264: 3 Kbps–8192 Kbps H.265: 3Kbps–8192 Kbps Day / Night Auto ( Icr ) / Color / B / W Blc Yes Hlc Yes Wdr 120 Db Scene Self-Adaptation ( Ssa ) Yes White Balance Auto; Natural; Street L Outdoor; Manual; Regional Custom Gain Control Auto;Manual Noise Reduction 3D Dnr Motion Detection Off / On ( 4 Areas, Rectangular ) Region Of Interest ( Roi ) Yes ( 4 Areas ) Smart Illumination Yes Image Rotation 0° / 90° / 180° / 270° ( Support 90° / 270° With 1080P Resolution And Lower ) Mirror Yes Privacy Masking 4 Areas. Audio Compression G.711A; G.711Mu; Pcm; G.726 ( Only - Zas Supports ) . Alarm Event -Zas:No Sd Card; Sd Card Full; Sd Card Error; Network Disconnection; Ip Conflict; Illegal Access; Motion Detection; Video Tampering; Intrusion; Tripwire; Scene Changing; Audio Detection; Voltage Detection; Defocus Detection; External Alarm; Smd; Safety Exception-Zs:No Sd Card; Sd Card Full; Sd Card Error; Network Disconnection; Ip Conflict; Illegal Access; Motion Detection; Video Tampering; Intrusion; Tripwire; Scene Changing; Voltage Detection; Defocus Detection; Smd; Safety Exception. Network Port Rj-45 ( 10 / 100 Base-T ) Sdk And Api Yes Cyber Security Video Encryption; Firmware Encryption; Configuration Encry Ption; Digest; Wsse; Account Lockout; Security Logs; Ip / Mac Filtering; Generation And Importing Of X.509 Certific Ation; Syslog; Https; 802.1X; Trusted Boot; Trusted Exec Ution; Trusted Upgrade Network Protocol Ipv4; Ipv6; Http; Tcp; Udp; Arp; Rtp; Rtsp; Rtcp; Rtmp; Smtp; Ftp; Sftp; Dhcp; Dns; Ddns; Qos; Upnp; Ntp; Multicast; Icmp; Igmp; Nfs; Samba; Pppoe; Snmp Interoperability Onvif ( Profile S / Profile G / Profile T ) ; Cgi; P2p; Milestone; Genetec User / Host 20 ( Total Bandwidth: 64 M ) Storage Ftp; Sftp; Micro Sd Card ( Support Max. 256 Gb ) ; Nas Browser Ie Chrome, Firefox Management Software Smart Pss; Dss; Dmss Mobile Client-Ios; Android.Audio Input 1 Channel ( Rca Port ) ( Only - Zas Supports ) Audio Output 1 Channel ( Rca Port ) ( Only - Zas Supports ) Alarm Input 1 Channel In: 5 Ma 3–5 Vdc ( Only - Zas Supports ) Alarm Output 1 Channel Out: 300 Ma 12 Vdc ( Only - Zas Supports ) Power Supply 12 Vdc / Poe ( 802.3Af ) Power Consumption Basic: 3.3 W ( 12 Vdc ) ; 4.2 W ( Poe ) Max ( Wdr + Ir Intensity + Intelligence On ) : 7.8 W ( 12 Vdc ) ; 9.7 W ( Poe ) Environment Operating Temperature –30 °C To +60 °C ( –22 °F To +140 °F ) Operating Humidity =95% Storage Temperature–40 °C To +60 °C ( –40 °F To +140 °F ) Protection Ip67.Warranty Of 1 Year. , Supply & Installation Of Camera Housing For Outdoor Suitable For High Temperature Environment, Working Temperature- 20? ~ +60?, Humidity 95% Or Less ( Non-Condensing ) , Main: Aluminum Alloy Window: Glass, Dimension ( Mm ) -455.3×169.2×110, Protection Level-Ip67. , Supply & Installation Of Camera Bracket Mount With Bracket Type: Pan Tilt Brackets, Dimensions Mm: 190 X 200 X 500 Mm, Max Load Kg-50, Housing Material-Steel. , Supply, Installation, Testing & Commisioning. 4 X 100M Poe Ports, 1 X 1000M Rj45 Port, And 1 X 1000M Sfp Fiber Optical Port. Supports Ieee 802.3At / Af. Supports Ieee 802.3, Ieee 802.3U And Ieee 802.3X.Supports High Priority Ports. Supports 8-Core Power Supply. Up To 250 M Transmission Distance. Poe Port With 6 Kv Surge Protection.Supports Poe Output Power Management. 1000M Network Access.Wire-Speed Forwarding And Non-Blocking Design.Store-And-Forward Switching.Solid High-Strength Metal Shell.Power Supply Specification 100~240 Vac, 50 / 60 Hz, Max. 2.5 A. Warranty Of 1 Year. , Supplying And Laying Of Cat-6 Cable With Rodent Proof And Anti Termite Jacket Suitable For Networking As Per Specification No. Wg-Coc / Nc , Supplying And Laying Of Cat-6 Armoured Cable With Eccs Tape Suitable For Networking As Per Specification No. Wg-Coc / Nc , Supply, Installation, Testing & Commisioning. 128G 128Gb Microsd Cards For Surveillance 128 Gb Maximum Read Speed: 96 Mb / S Maximum Read Speed: 96 Mb / S Compatible With Microsdhc, Microsdxc, Microsdhc Uhs-I, And Microsdxc Uhs-I Host Devices. Warranty Of 1 Year. , Supply, Installation & Testing Of 6 U Outdoor Rack Item Type Technical Parameter Layout & Mounting One Compartment, Pole & Wall Mountable Equipment Installation Method 19” Standard Rack Door With One Front Door With Lock ( Support Padlock ) Material 1.Galvanized Steel;2.Single Wall, Thickness Of : 1.2Mm, Thickness Of Mounting Angles:1.5Mm Structure Assembled, Welded Constructions, Ingress Protection Ip65 Temperature Control Cooling Ac220v 90 Cfm Dual Fan.Lighting Led Lamp Ac230 V Or Dc 48V Led Lamp- Optional Temperature Temperature Working Temperature: -40°C ~ +55°C Storage Temperature: -50°C ~ + 70°C Transport Temperature: -50°C ~ +70°C Humidity Relative Humidity 5% ~ 100% Pressure Air Pressure 62Kpa ~ 101Kpa ( Similar To 0M ~ 5000M Altitude ) Radiation Intensity Solar Radiation Intensity 1124 × ( 1±5% ) W / M2 ) Warranty For 1 Year. , Supply, Installation, Testing & Commisioning. Media Converter, Auto-Negotiation Of Half-Duplex / Full-Duplex Transfer Mode Extends Fiber Distance Up To 15Km.1× 1000M Sc / Upc Port 1× 10 / 100 / 1000M Rj45 Port ( Auto Mdi / Mdix ) . Single-Mode Fiber, Utp Category 5, 5E Cable ( Maximum 100M ) Eia / Tia-568 100O Stp ( Maximum 100M ) .Operating Temperature: 0?~50? ( 32?~122? ) . Warranty Of 1 Year. , Supplying And Erecting Lszh Armoured Multimode Optical Fibre Cable With 12 Fibres, Core Dia 50 / 125 ?M ( Om3 ) , Suitable Up To 10 Gbps Ethernet Distance At 850 Nm Of Wavelength, On Wall / Ceiling Or Laid In Provided Pipe / Trench As Per Specification No. Wg-Coc / Ofc , Providing & Erecting 5 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A / F, Top 70 Mm A / F On Provided Foundation As Per Specification No. Oh-Pl / Opl. , Making M- 20 Grade Reinforced Cement Concrete Foundation By Considering The Safe Soil Bearing Capacity As 10 T / Sq.M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation, Fixing Provided Nut Bolts With The Help Of Template, Duly Plastered As Per Design Complete ( For 3 To 5M Octagonal / Conical Gi Pole ) . , Supply, Lnstallation, Testing & Commissioning Of Nvr Viewer Workstation ( Hp / Dell / Lenovo ) With Duel Monitor Support , With Nvr Viewer Software And License Operating System 12Th Gen Lntel Corerm I5- Processor Windows 10 Pro ( Windows 1 1 Pro License Included ) , English8 Gb, Ddr5, 256 Gb, M.22230, Pcle Nvme, Ssd, Class 35 Power Button; Hard Disk Drive Activity Light ;. Line Ln / Out 4. Universal Audio Jack S.Usb 3.2 Gen 2Type A With Power Share 6. Usb 3.2 Gen2x2 Type C ( 20Gb Data ) Back ( 35W ) : Knock-Out Slot For External Wireless Antenna ( Optional ) ; Optional Video Port ( Hdmi 2.0B1 Displayport 1.4A1 Vga / Usb Type-C With Displayport Alt Mode ) ; Usb 3.2 Type A Ports ( 2 - One With Power On ) ; Padlock Ring And Kensington Security Cable Slot ; Ethernet Rj-45 12. Usb 3.2 Gen 2 Type A Ports ( 2 ) ; Display Ports 1.A ( 1 ; Power Adapter Portback ( 65W ) : ; Knock-Out Slot For Wireless Antenna ; Optional Video Port ( Hdmi 2.0Bl Displayport 1.4A1 Vga / Usb Type-C With Displayport Alt Mode ) ; Usb 3.2 Gen 1 Type A With Smart Power On; Padlock Ring And Kensington Security-Cable Slot ; Ethernet Rj-45; Usb 3.2 Gen 2 Type A Ports ( Z ) ; Displayport 1.4 Ports ( 3 ) ; Power Adapter Port.Warranty Of 1 Year. , Supplying, Erecting, Testing And Commissioning Of 3Kva Capacity Online Pure Sine Wave With Backup Time Of ....... Hrs. Pwm & Igbt Based Ups With 0.8 To Unity Output Pf, Single Phase Input & 1 Phase Output Complete With All Protections As Per Specification No. Ap-Ups. Warranty Of 1 Year. , Supplying And Erecting 12 V / 65Ah Smf Battery With Battery Terminal Wire, Duly Charged Complete With 24 Months Warranty Complete. Warranty Of 1 Year. , Supply, Installation Testing And Commissioning Of Router - Cable Or Dsl Modem With Ethernet Port, 4 10 / 100 Lan Ports, 1 10 / 100 Wan Port, 2.4 Ghz To 2.497 Ghz, Wep 64 / 128-Bit Data Encryption, Wi-Fi Protected Access ( Wpa / Wpa2 ) , Wps, Network Address Translation ( Nat ) , Stateful Packet Inspection ( Spi ) , Mac Address Filtering, Url Filtering, Power, Internet Status, Wlan , Lan.Warranty Of 1 Year. , Supply, Installation, Testing & Commisioning. Uhd 4K Led Display 86 Interactive Panel With Resolution Of 3840 × 2160 ? Anti-Glare And Anti-Blocking Design To Ensure Smooth Interaction? Dual Systems Of Windows And Android Saving Cost And Easy To Use? Quick Response, At Most 20-Point Touch Control And Smooth Writing Experience? Dual Usb 3.0 Interfaces, And Data From Any Interface Can Be Read In Windows And Android System At The Same Time? Enable The Floating Ball By Gesture To Realize Writing, Erasing, Screenshoting And Freezing In Any Channel? Mirroring By Mobile Phone Or Tablet To Realize Remote Control And Flexible Teaching? Teaching Software Integrating Kinds Of Tools And Materials, Convenient Writing, Erasing, Recording, Preparing And Teaching ? Scan The Qr Code To Save The Teaching Notes ? All-In-One Design With Tempered Glass And Intelligent Temperature Control, Making It Environmental-Friendly And Safety-Guaranteed.Warranty Of 1 Year. , Supply Installation & Testing Ofvms, An Integrated Security Software, Is Designed To Meet Versatile Security Challenges In One Intuitive Platform: From Managing Individual Systems Such As Video Security, Access Control, Intrusion Alarm, Etc., To Collaborating Multiple Systems Under A Unified Architecture. While Protecting People And Property, It Makes Daily Operations More Efficient, And Helps Various Kinds Of Users Make Smarter Decisions. , Supply, Installation And Testing Of 10 Tb Surveillance Storage Hard Disk Drive -24R Surveillance Hdo Capacity - 8 Tb Interface Sata Iii 6 Gb / S Max Sustained Transfer Rate Od-210 Mbs Cache - 256 Mb Tamish Resistant Load / Unloadcycles-300 000 Power On Hours / Year 8760 Mean Tim Between Failures ( Mtbf ) - 1 Million Hours Operating Temperature - Ambient : 41 F / 5 C ( Min ) Drive Case : 158 F / 70 C ( Max ) Non Operating Temperature Ambient : 40 F / 10C ( Min ) . Warranty Of 1 Year. , Supply, Installation Testing And Commissioning Of 21 U Rack Rack Standard : Conforms To Din 41494 Or Equivalent Standardconstruction : Welded Or Ckd ( Knockdown ) Front Door : Lockable Double Toughened Glass Door Or Perforated Basic Frame : Steel Equipment Mounting : Din Standard 10Mm Sq. Slots / Direct M6 Tapmounting Angle : 19” Mounting Angles Made Of Formed Steelstandard Finish : Powder Coatedtop And Bottom Cover : Welded To Frame, Vented And Cable Entry / Exit Cut Outs From Top & Bottom Standard Mounting Option : Castor Wheels ( Front 2 Wheels With Break And Rear Without Break ) Or Levelers Standard Color : Grey Or Black Static Load : 500Kgs. Warranty Of 1 Year. , Supply, Installation Testing And Commissioning Of 8 Port Poe Later 2 Indoor Network Switches With 2 Sfp Port And Modules Complete As Required. 3 Years Defect Liability Period, All Necessary Maintenance, Transportation, Rack And Taxes.Warranty Of 1 Year. , Supply, Installation Testing And Commissioning Of Nvr For Video And Audio Ip Video Input 64-Ch Up To 12 Mp Resolution*: 32 Mp And 24 Mp Is Only Available For Channel 1 When Ultra Hd Resolution Mode Is Enabled. Incoming Bandwidth 320 Mbps Outgoing Bandwidth 256 Mbps Incoming Bandwidth ( Raid Mode ) 200 Mbps Outgoing Bandwidth ( Raid Mode ) 200 Mbps Hdmi 1 Output 4K ( 3840 × 2160 ) / 60Hz, 4K ( 3840 × 2160 ) / 30Hz, 1920 × 1080 / 60Hz, 1600 × 1200 / 60Hz, 1280 × 1024 / 60Hz, 1280 × 720 / 60Hz, 1024 × 768 / 60Hz Hdmi 2 Output 1920 × 1080 / 60Hz, 1280 × 1024 / 60Hz, 1280 × 720 / 60Hz, 1024 × 768 / 60Hzvga 1 Output 1920 × 1080 / 60Hz, 1280 × 1024 / 60Hz, 1280 × 720 / 60Hz, 1024 × 768 / 60Hz Vga 2 Output1920 × 1080 / 60Hz, 1280 × 1024 / 60Hz, 1280 × 720 / 60Hz, 1024 × 768 / 60Hz Video Output Mode Hdmi 1 And Vga 1 Provide Simultaneous Video Output, And Work As The Main Output;Hdmi 2 And Vga 2 Provide Simulta Neous Video Output, And Work As The Auxiliary Output Cvbs Output 1-Ch, Bnc ( 1.0 Vp-P, 75 O ) , Resolution: Pal: 704 × 576, Ntsc: 704 × 480 Audio Output2-Ch, Rca ( Linear, 1 K? ) Two-Way Audio1-Ch, Rca ( 2.0 Vp-P, 1 K?, Using The Audio Input ) Decoding Decoding Format H.265+ / H.265 / H.264+ / H.264 / Mpeg4 Recording Resolution 32 Mp / 24 Mp / 12 Mp / 8 Mp / 6 Mp / 5 Mp / 4 Mp / 3 P / 1080P / Uxga / 720P / Vga / 4Cif / Dcif / 2Cif / Cif / Qcif *: 32 Mp And 24 Mp Is Only Available For Channel 1 When Ultra Hd Resolution Mode Is Enabled. Synchronous Playback 16-Ch Decoding Capability 1-Ch@32 Mp ( 30 Fps ) / 2-Ch@12 Mp ( 20Fps ) / 4-Ch@8 Mp ( 25Fps ) / 8-Ch@4 Mp ( 30Fps ) / 16-Ch@1080P ( 30Fps ) Dual-Stream Recording Support Stream Type Video, Video & Audio Audio Compression. 711Ulaw / G.711Alaw / G.722 / G. 726 / Aac / Mp2l2 / Pcm Network Remote Connection 128 Network Protocoltcp / Ip, Dhcp, Ipv4, Ipv6, Dns, Ddns, Ntp, Rtsp, Sadp, Smtp, Snmp, Nfs, Iscsi, Isup, Upnp™, Http, Https Network Interface 2, Rj-45 10 / 100 / 1000 Mbps Self-Adaptive Ethernet Interface Raid Raid Type Raid0, Raid1, Raid5, Raid6, And Raid10 ( At Least 4 Tb For Each Hdd ) Auxiliary Interface Serial Interface 1 Rs-485 ( Full-Duplex ) , 1 Rs-232, 1 Keyboard, 10 Sata Interfaces Supporting Hot-Plug Esata 1 Esata Interface Capacity-Up To 10Tb Capacity For Each Disk. Alarm In / Out-16 / 4. Usb Interface Front Panel: 2 × Usb 2.0; Rear Panel: 1 × Usb 3.0 Power Supply-100 To 240 Vac, 50 To 60 Hz Consumption-30 W Working Temperature-10 °C To 55 °C ( 14 °F To 131 °F ) Working Humidity 10% To 90% Chassis 3U Weight-10 Kg ( 22 Lb ) .Warranty Of 1 Year. , Supplying, Installing And Testing Utp Connector ( Rj-45 ) As Per Specification No.Wg-Nas / Utpc. , Amc ( Semi-Comprehensive ) Forcamera Complete Solution From On Field Equipments To Command Control Setup For 2Nd Year Where Upto Rs.1000 Will Be Waived Off Or Bare By Agency.From Agency Twice Inspection Will Be Done In A Month And Camera Position And Working Status Of Camera Will Be Updated. ( Parts Includes In Semi Comprehensive Amc Are Camera, Poe Switch, Tv, Work Station, Memory Card, Nvr, Inverter & Batteries ) . , Amc ( Semi-Comprehensive ) Forcamera Complete Solution From On Field Equipments To Command Control Setup For 3Rd Year Where Upto Rs.1000 Will Be Waived Off Or Bare By Agency.From Agency Twice Inspection Will Be Done In A Month And Camera Positionand Working Status Of Camera Will Be Updated. ( Parts Includes In Semi Comprehensive Amc Are Camera, Poe Switch, Tv, Work Station, Memory Card, Nvr, Inverter & Batteries ) . , Amc ( Semi-Comprehensive ) Forcamera Complete Solution From On Field Equipments To Command Control Setup For 4Th Year Where Upto Rs.1000 Will Be Waived Off Or Bare By Agency. From Agency Twice Inspection Will Be Done In A Month And Camera Position And Working Status Of Camera Will Be Updated. ( Parts Includes In Semi Comprehensive Amc Are Camera, Poe Switch, Tv, Work Station, Memory Card, Nvr, Inverter & Batteries ) . , Add 4% Contigency Rs.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 5
Maharashtra View Result →
12.
Educational and Research Institute #10372706 Price Bid
Procurement Of Equipment, Instrument, Machineries, Tools Etc. Related To Laboratories Procurement Of Equipment Related To Laboratories And Workshops Of Mechanical Electrical Civil Chemical Engineering And Science Humanities Departments Of Hooghly Institute Of Technology Hooghly-Strain Gauge Trainer Kit - Gauge Factor : 2.1 Maximum Bearable Weight : 500 Gm, Cantilever Material : Stainless Steel, Bridge Configuration : Full Bridge Display : 3½ Or 4 Digit Ledwith User Manual 2 Measurement Of Temperature Using Thermocouple, Rtd, Thermistor, Ad950 - Transducers With Electronic Instrumentation Transducers : Thermocouple ( K - Type ) , Thermocouple ( J - Type ) , Thermistor ( Ntc ) , Rtd ( Pt 100 ) , Semiconductor Sensor ( Lm 335 ) And Semiconductor Sensor ( Ad 590 ) With User Manual 3 Bourdon Tube Type Pressure Gauge - Bourdon Tube Type Pressure Gauge, Pressure Range Upto 10, 000 Psi, Accuracy Upto + / -0.25%, With Pumping System 4 Flow Control System Using Mass Flow Meter, Single Loop Controller And Control Valve - Set Up Should Consist Of ---Mass Flow Meter, Single Loop Controller, Control Valve ( Glove ) , Transmitter Should Be Installed At The Upstream Of Control Valve, Controlling Facility By Controller, Continuous Water Recycling Facility, Table Mounted Set Up Preferable With User Manual 5 A / D & D / A Converter Trainer Kit - Analog To Digital Converter • 8-Bit Descrete Adc • On-Board Signal Generator With Adjustable Amplitude Levels • On-Board Led Bank To Observe Digital Outputs • Power Supply : +5V, ±12V Gnd • Interconnection Is Provided By 2Mm Connectors • Experimental Manual Digital To Analog Converter • 8-Bit Binary Weighted Resistors Dac • 8-Bit Ladder Type D To A Converter • Onboard Switches Are Provided For Digital Pattern Generation • 8-Bit Digital Inputs Ranges From 00 To Ff • Extensive Experimental Manual Is Provided With The Kit 6 8051 Based Advanced Microcontrollertrainer - 8051 Microcontroller Trainer Kit;Based On Intels 8051 Microcontroller 12Mhz With • On Board Power Supply • Rechargeable Ni-Cd Battery • Ascii Keyboard Interface • Programming Interface With Pc • Compiler And Cross Assemblers For Programming In C, • Lcd Display, 8051 Usb Programmer, 16*2 Lcd, Light Sensor Module ( Ldr ) , Tsop Sensor Module, 4*4 Matrix Keypad, Aa 6 Cell Holder, Burge Strip F-F Connectors, • 32 K Or Higheruser Ram. ( Expandable ) • Serial I / O Through 8251 Usart • Parallel I / O Lines Available Through Two 8255 Chips • 3 Channels Of 16 Bit Timer / Counters From 8253. 8254 • Adc & Dac Interface Module • Stepper Motor Interface • Square, Triangular, Staircase Wave Generator Interface Module • Dc Voltage, Current Measurement Interface Module • Zero Crossing Detectors Interface Module • Users’ Guide • Cd - Required Software, Usb Cable, Microcontroller & Its Interfacing Book With Application Projects, Cd - Required Software 7 Microcontroller Development Kit - 8051 Development Kit With Accessories And Software 8 Solar Photovoltaic Cell Characteristics Trainer Kit - 12V Solar Module With Suitable Arrangement Of Halogen Lamps 500W, Digital Dc Voltmeter And Ammeter, Lux Meter And Variable Resistive Loadwith User Manual 9 Flux Meter ( Magnetic ) - Integrating Type Digital Fluxmeter, With 3&Half Digit Digital Display, 4- Ranges Of Measurements Indicating Flux Values From 0.1 Kmt ( Kilo Maxwell Turns ) To 2*105 Kmt 10 Digital Storage Oscilloscope ( 70 Mhz ) Detailed Technical Specifications:- A ) No. Of Channels : 2 Or 4 B ) Bandwidth : 70 Mhz C ) Maximum Input : 400 V ( Peak ) D ) Sample Rate : 2 Gsa / Sec E ) Waveform Update Rate : 400 Waveforms / Sec F ) Memory Depth : 100 Kpts Standard ( Upgradable ) G ) Time Base : 5Nsec / Div. To 50 Sec. / Div H ) Waveform Update Rate: 50, 000 Waveforms / Sec I ) Display : 8.5 Inch Colour Wvga J ) Trigger Modes : Force, Edge, And Video, Pulse Width. K ) Built In Interface : Standard Usb 2.0 High Speed Device 11 Lcr Q Meter - Measuring Inductance ( L ) , Capacitance ( C ) , Resistance ( R ) , Quality Factor ( Q ) And Dissipation Factor ( D ) . With A Basic Accuracy Of 0.25% And Five Digit Display Resolution. 12 Diode And Zener Diode Characteristics Trainer - A Complete System To Study The Diode Characteristics Forward And Reverse Characteristics Experiment Can Be Performed On This Trainer Kit Silicon, Zener And Germanium Diode Are Provided With This System. Inbuilt Ammeter And Voltmeter. Digital Display For Displaying Voltage And Current. Different Test Points With User Manual 13 Experimental Kit For Input / Output Characteristics Of Bjt- One Fixed 12V Power Supply, One Variable Constant Voltage Source And One Constant Current Source For Output Characteristic Of The Transistor. Three Digital Meters On The Panel. One Fixed Frequency Of 1Khz With Variable Amplitude , Bread Board With User Manual 14 Training Kit To Study Of Opamp Characteristics - Specification: 2 No. Variable Dc Power Supply 0-3V / 30Ma, 1 No. Fixed Dc Power Supply 12V1 No. Operational Amplifier Ic 741 & Different Types Of Resistance, Capacitors And One Potentiometer With User Manual 15 Training Kit To Study Of Universal Logic Gates & Applications With Power Supply - • On Panel Gates : 4 Nand Gates ( 7400 ) , 4 Nor Gates ( 7402 ) , 4 And Gates ( 7408 ) , 4 Or Gates ( 7432 ) & 6 Not Gates ( 7404 ) • 5 Nos Of Extra 18 Pin Ic Base Mounted On Panel To Use Different Ics • 5 Logic Input Switches With Led • 5 Logic Output Led • On Panel 5 Sockets Each For +5 V & Gnd • Required Numbers Of Patch With User Manual 16 Training Kit For Study Of Kirchhoff’S Current & Voltage Law- Equipped With Necessary Resistors, Digital Voltmeters, Ammeter And Inbuilt Variable Power Supply 5V & 12V.On Board Test Points To Observe Signals, On Board Schematic Diagram, With User Manual 17 Analog Wattmeter - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Dynamometer Type Wattmeters I ) 5-10A, 150-300-600V, Ii ) 10-20A, 150-300-600V. 18 Series Parallel Resonance Of R-L-C Ckt - Kit For Series Parallel Resonance Of R-L-C Ckt: The Set-Up Consist Of Power Supply, Audio Oscillator With Digital Readout, Digital Rms Meters And Different Number Of Inductors ( Smoothly Variable ) , Capacitors, Potentiometer, Ammeter & Voltmeters With User Manual 19 Power Factor Meter ( Single Phase ) - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Power Factor Meter- Dynamometer Type Power Factor Meter , 1 Phase , Current Coil Range : 2.5 & 5.0 Amps. ( Dual Range ) , Pressure Coil Range: 150, 300 Volts ( Double Range ) . 20 Power Supply:Dc - • 2X30v-3A, 5V-3A • Constant Voltage & Constant Current Operation • Digital Displays For Voltage & Current • Adjustable Current Limiter • Protection Against Overload & Short Circuit 21 Training Kit For Verification Of A ) Superposition Theorem. B ) Thevenin’S Theorem. C ) Norton’S Theorem. D ) Maximum Power Transfer Theorem. Two Nos. Variable Dc Power Supply. Two Nos. Resistive Potentiometer ( Pot ) . Differnt Values Sets Of Resistances. Digital Dc Voltmeter, Dc Ammeter, Complete Operating Manual, Connecting Wires , Patch Cords, Etc. 22 Ac Distributor Simulator - Transmission Line Trainer Consist Of:- 100 Km X 3 Phase Tx Line Block At The End Of Each Block Short Is Possible All Digital Multifunctional Meters At The Sending & Receiving End, Loading Provision For Total 1Kva – Load Of Variable Separate Inductive, Capacitive & Resistive Load Bank. High Quality Patch Cord And User Manual. 23 Lux Meter - Sensitivity – 1 - 50, 000 Lux Error Percentage + 5%, 4 ½ Digit To 5 ½ Digit Detail Operating Manual Also To Be Supplied 24 Dielectric Strength Test Setup For Transformer Oil - Transformer Oil: Breakdown Voltage : 0-60Kv, Vertical Panel Mounted With Voltmeter, Glass Cover Encapsulated, Test Cup And Gap Measuring Gauge With 10 Liter Of Transformer Oil 25 Digital Insulation Tester , Digital Insulation Tester: 500V, 200Mohm, Portable Type 26 Half Wave & Full Wave Bridge Rectifier Trainer Kit, 1 / 2 Wave, Fullwave ( Centre Tapped & Bridge ) With Filter Ckt With User Manual 27 Experimental Kit For Characteristics Of Zener Diode, Complete Set Should Consist Of All Accessories To Perform The Experiment Using A Zener Diode Fitted On The Printed Boardwith User Manual 28 Experimental Kit For Input / Output Characteristics Of Bjt, Transistor Trainer Kit Consists Of One Fixed 12V Power Supply, Variable Constant Voltage Source And Constant Current Source For Output Characteristic Of The Transistor.Digital Meters On The Panelwith User Manual 29 Experimental Setup For Implementation Of Adder & Subtractor, With Adder ( Half & Full ) & Subtractor ( Half & Full ) Using Basic Gates. Must Have Onboard Input Supply, Display To Show Logic Outputwith User Manual 30 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer With Power Supply, Display Unit, Patch Cords, Necessary Ic And Manuals For Each. 31 A / D & D / A Converter Trainer Kit 8 Bit With Accessories And Manual. 32 Scr Single Phase Half Wave, Full Wave, Fully Controlled Bridge Rectifier / Converter With In-Built Meters And On-Board Power Supplywith User Manual 33 Training Kit For Study Of Vi Characteristic Of Scr, Igbt , With Separate Section For Scr And Igbt Characteristics With In-Built Meters And Led Indicationswith User Manual 34 Scr Firing Circuit, Power Requirement: 230 Vac +10%, 50Hzstandard Accessories:6 Volt / 1 / 4 W Lamp, Patch Chords & Instruction Manual 35 Training Kit For Study Of Vi Characteristic Of Diac, With Proper Heat Sink And Training Manual.Consists Of One No. Diac With Proper Heat Sink.All Components Should Mount On A Screen Printed Pcb Fixed On Acabinets 36 Scr Commutation Circuit, Scr Commutation Circuit Commutation Techniques Used . I ) Class A Ii ) Class B Iii ) Class C Iv ) Class D V ) Class E Vi ) Class F • In Built Ic Based Dc Regulated Fixed Power Supply +12Vdc & Acwith User Manual 37 Electronic Energy Meter, A.C. Single Phase, 2 Wire Solid State ( Static ) Fully Electronic Energy Meter, Accuracy Class 1.0 & Current Rating 5-30 Amp. With Backlit Lcd Display For 240 Volt System Fitted With Pilfer Proof Meter Box. 38 Trainer Kit For Measurement Of Medium Resistance By Wheat Stone Bridgekit Must Have Inbuilt Power Supply, Measurement Range 1 Ohm – 100 Ohm, Having Sensitive Galvanometer With User Manual 39 Trainer Kit For Measurement Of Low Resistance By Kelvins Double Bridge, With Power Supply, Range 1 Microohm -1 Kiloohm, Having Sensitive Galvanometerwith User Manual 40 Earth Tester, Insulation Reslstance Test: More Than 25 Megohms At 500 V Dc Between Electrical Circuit & Containing Case, Display: Led Or Lcd. Dual Ranges: 0 - 10 - 1000 Ohm ( B ) 0 - 5 - 500 Ohm 41 Trainer Kit For Measurement Of Inductance By Anderson Bridgekit Must Have Built In Power Supply, Inbuilt Signal Source, Application Bridge On Screen Printed Front Panel Display, Set Of Unknown Inductance Coil, Variable Resistance, Set Of Capacitance, Audio Null Detector, Patch Cords, Connecting Wires And Head Phone, Complete Operating Manual. 42 Trainer Kit For Measurement Of Capacitance By Schering Bridge Kit Must Have Input Supply 50 Hz Sine Wave, Two Ratio Dial P & Q, Each Having 1, 10, 100, 100 Ohm Coil, 3 Decade Dial, X 0.001 Microfarad, 0.01 Microfarad, 0.1 Microfarad. Having Sensitive Head Phonewith User Manual 43 Tri-Vector Meter 3Ph 4 Wire Lt Ct & 3Ph 3 / 4 Wire Ht Ct / Pt Operated Fully Static Amr Compatible Tri-Vector Energy Meters Dlms Compliant – Category C 44 Trainer Kit For Measurement Oflinear Displacement Bylinear Variable Differential Transformer ( Lvdt ) For Linear Displacement, Type: Spring Loaded Core Type, Configuration: Axial Type Lvdt Full, Actual Displacement: By Micrometer Arrangement Pitch: 1 Mm, Circuit: Ac Excitation Source, Phase Detector & Digital Display, Excitation Source: Sine Wave Of 2 Khz To 5 Khz Variable Frequency And 0 To 5 Or 12V Variable Amplitude, Readout: Digital Display To Measure 0 To + / - 10 Mm, Indicating, Displacement In Millimeters With Core In / Out Indicated By + Sign, Test Points: Instruction Manual 45 Measure Pressure Using Pressure Sensor Kit.Resistive Pressure Transducer With Pressure Of 0-300Mm Hg / 6Psi, Primary Excitation Voltage Of 5V Dc On Board Provided. On-Board 41 / 2 Digital Panel Meter Provided Using Ad7135. Pressure Generation And Monitor Using A Pressure Gauge. Onboard Instrumentation Amplifier Provided With User Manual. 46 Trainer Kit For Op-Amp As Inverter, Non-Inverting Modefront Panel Built With High Class Insulated Printed Circuit Board Sheet With Well Printed Circuits And Symbols. Fuse For Short Circuit Protection. Patch Cords. The Trainer Is Housed In Abs Plastic / Wooden Cabinet.Size Of The Trainer Set 12”X8”. Instruction Manual. 47 Trainer Kit For Op-Amp As Adder, Differentiator And Integrator Instrument Comprises Of Two Dc Regulated Power Supply 0-5V Dc, ±15V Dc, One Meters To Measure Input And Output Voltage & Combination Of Resistance, Capacitors Mounted On Front Panelwith User Manual 48 Convert Digital Data Into Analog Data By Using Analog To Digital Converters And Analog Data Into Digital Data By Digital To Analog Converter Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden Box, Proper Patch Cord With User Mannual.Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden / Metal Enclosure 49 Simulate Differential Protection Scheme For Transformer With Power System Simulation Kit-3-Phase, 415V, 50Hz, Ac Supply. Control Supply : 1-Phase, 230V, 50Hz, Ac Supply. Short Circuit Protection : Hrc Fuses & Mcb. 3-Phase, 3Kva, 415 / 240V, Delta / Star Connected Transformer With Tapings Primary : 0-10-20-100% Secondary - 0-10-20-100% On Each Phase Of Windings, Natural Air Cooled. • Protection Cts : Primary Side Cts 10 / 1A, 5 Va, Cl-1, Wound Primary Typesecondary Side Cts 20 / 0.67A, 5Va, Wound Primary Type. • Fault Simulating Switches : 32A, 2-Pole, On / Off Rotary Switches Are Provided For Creating A ) Line To Ground Fault, B ) Line To Line Fault, C ) Inter-Turn Faultprotective Relays. % Differential Relay Static Type-With Minimum Basic Setting Biased Feature 10%, 20%, 30%, 40%, 50% Setting For Current. Ct Rated 1A Definite Time Over Current Relay • Earth Fault Relay • Aux. Supply To Relay : 110 / 220 V Ac / Dc Educational Bench Model With Schematic Diagram Of The Test Circuit Printed On The Model Test Points & Measurement Points Brought Out & Connected To Terminals, Circuit Setup For Testing Through Interconnections Of Patch Chords With User Manual 50 D.C. Compound Motor ( Open Type ) - 2 Hp- Dc Compound Motor: 2H.P. 1500Rpm, 230V, Open Type For Assemble And Dismantling Of Different Parts Of Stator And Rotor, Commutator, Brush Etc. 51 D. C. Shunt Generator- For O.C.C. Test-Dc Motor:- 2Hp, 1500 Rpm., 220V Dc Generator:- 1Kw, 1500 Rpm, 220V. Necessary Panel To Set Up With Foundation, Voltmeter:0-300V, Ammeter: 0-5A, Ammeter:0-1A, 4-Point Dc Starter. 52 Dc Motor Speed Control System With Power Supply & Motor-Motor 0.5 Hp, Variable Dc ( 0-230V ) Source, Built In Techogenerator, Digital Panel Meter, Power Circuits Of 4 Scrs ( 1200V., 25 A ) I.E. Half Bridge, Facilities Of Studying Torque Speed Characteristics Of Dc Motor, Torque Measurement, Rpm Indicatorwith User Manual 53 Swinburns Test To Compute Efficiency Of Shunt Generator, 1Hp, 220V, 1500Rpm-D.C. Motor:- 2 Hp, 230V, 1500Rpm, Shunt Field. Suitable Panel Withvoltmeter ( 0-300V ) , And Ammeter: 0-1A, Ammeter:0-5A With User Manual & Proper Setup With Foundation 54 Determination Of Equivalent Circuit Parameters Of A Single Phase Transformer By O.C And S.C Test- Transformer: 1 Kva, 230 / 115V, Variac: 0-270V, Panel With Voltmeter: ( 0-50V ) , Voltmeter ( 0-300V ) , Ammeter: 0 -2A, Ammeter:0-10A, Wattmeter: 0-1200W. 55 Compute The Efficiency Of A Single Phase Transformer By Back To Back Test- Complete Set Upwith User Manual: Ac Power Supply 0-230V At 4A ( Optional ) • Operated On Mains Power 230V, 50Hz +10% Digital / Analog Meters: • Voltmeter 2 Nos. ( For Primary And Secondary ) • Ammeter 2Nos. ( For Primary And Secondary ) • Digital Wattmeter 2Nos. 56 Parallel Operation Of Two Single Phase Transformers To Determine The Sharing Of Load Current, Apparent Power And Real Power- Transformer ( 2 Numbers ) : 1 Kva, 230 / 115V, Panel With Voltmeter ( 0-300V / 150V ) , Ammeter: 0-10A, Variable Resistive Load 115V, 10A, Single Phase. 57 Three Phase Transformer With Provision For The Connection In All Vector Groups ( Stardelta, Delta-Star Etc ) - 3-Phase, 1Kva, 415V / 230V, Transformer With Provision For The External Connection Terminals To Perform All Vector Groups ( Star-Delta, Delta-Star Etc. ) . 58 Isolation Transformer - Single Phase, 1Kva , 3Phase , 415V / 230V Isolation Transformer With Provision To Show Its Function And Testing Of It. 59 Tachometer For Speed Measurement-Digital Photo Tachometer • No Contact Rpm Measurement, Wide Measuring Range From 0.5 To 100, 000 Rpm. , Resolution: 0.1 Rpm ( < 1000 Rpm ) . • The Last Value Can Be Stored Into The Memory Automatically & Be Obtained By Pressing Memory Call Button With User Manual 60 4 Point Starter-For Operational Upto 7.5 Hp Dc Motor, 230Vdc. 61 Ac Variac ( Closed Type ) - Single Phase 8A, 0-270V, Rotary Type 62 Clip On Meter-Clip On ( Digital Led Display ) Type Meter Suitable For Measurement Of ( I ) Ac / Dc Current 5 / 10 / 50Amp, With Zero Set Button ( Ii ) Voltage:600Vac / 500Vdc, ( Iii ) Resistance: 0-10Mohms. 63 The Three Phase Squirrel Cage Induction Motor Setup With Various Starters- Complete Panel With Dol, Star-Delta , Auto-Transformer Starter With 2Hp , 3Phase, 415V , 4Pole, 1500Rpm, Squirrel Cage Induction Motor With Suitable Foundation & User Manual 64 Three Phase Squirrel Cage Induction Motor For Direct Load Test To Plot The Various Characteristics-2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 65 Three Phase Squirrel Cage Induction Motor For No Load And Blocked Rotor Test- 2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 66 Three Phase Squirrel Cage Induction Motor For Speed Control-Applicable Methods: I ) Auto-Transformer, Ii ) Vvvf. Specification: 2Hp , 3Hp , 415V, 4Pole, 1500 Rpm Three Phase Squirrel Cage Induction Motor With Necessary Panel Meters And Equipments. 67 Three Phase Slip Ring Induction Motor With Necessary Panel, Proper Base Foundation - To Measure The Open Circuit Voltage Ratio Of The Three Phase Slip Ring Induction Motor.Specification: 2Hp , 3Ph , 415V, 4Pole, 1500 Rpm 68 Three Phase Alternator For Oc, Sc And Load Test-3 Kva, 415 V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With Dc Motor ( Shunt ) 5Hp, 220 V, 1500Rpm, 4-Point Dc Starter, 3-Phase Variable Resistive Load 220 ( L-L ) , 15A Per Phase, With Necessary Panel, Proper Base Foundation 69 Squirrel Cage 1 Hp, 400V I / M & Stroboscope To Measure Slip- I ) 1Hp, 415V, 3-Ph, 50Hz, 1440 Rpm Squirrel Cage Induction Motor With Loading Arrangement. Ii ) Stroboscope For Frequency 0-6Khz. 70 Three Phase Synchronous Motor-Synchronous Motor:3Hp, 415V, 1500 Rpm, Excitor 220V, Dc Through Slipring, Dc Shunt Generator, 1.5Kw, Rpm, 230V Dc, Regulator Control With Necessary Panel, Proper Base Foundation 71 Synchronization Of 3 Phase Alternators By Synchroscope & 3 Lamp Method-Synchronization Of 3 Phase Alternators: 2- Numbers Of 3 Kva, 415V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With 2-Numbers Of Dc Motors ( Shunt ) 5Hp, 230Vdc, 1500Rpm Alongwith Synchronisation Panel With Synchronoscope, 3-Lamps ( With Fuse ) For Lamp Method, Ammeters & Voltmeters For Dc Motors And Alternator, Digital Frequency Meter, Digital Rpm Meter For Dc Motors, 4-Point Dc Starters For Both Motors, 3-Phase Star Connected Variable Resistive Load, 4-Pole Mcb ( S ) & Variable Dc ( With 2-Pole Mcb ) Field Control For Both Alternators. The Whole Set-Up Needs To Be Equiped With Proper Electrical Protection, Base Foundation, Connector Cables, With User Manual, 72 Stepper Motor Controller Trainer-Stepper Motor Controller Trainer Stepper Motor : Motor Type :Unipolar, Torque : 6 Kg-Cm Phase Current : 0.8 Amp. , Stepping Angle : 1.8° / 0.9° Operating Voltage : 12 V Dc Input Pulse : 5V Ttl Compatible, Test Points :20 Gold Plated With User Manual 73 D.C. Servometer Speed Control -Trainer Kit-Kit For D.C. Servometer Speed Control- Position Control Of A 12V, 1A D.C.Gear Motor ( 50 Rpm ) Provision For Positive And Negative Tacho Generator Feedback Tacho Constant: 2V / 1000 Rpm Approximately Calibrated Dials For Reference And Output Position: Resolution 1° Servo-Potentiometers With Full 360°Rotation Microprocessor Based Waveform Capture / Display Card Built-In 3½Digit Dvm For Signal Measurements Built-In Step Signal And Ic Regulated Power Supplies For Electronic Circuits Separate Unit For Motor In A See-Through Cabinet 220V±10%, 50Hz Mains Operation With User Manual 74 Oil Hydraulic Circuit Trainer Unit: Hydraulic Circuit Trainer Unit Consisting Of Standard Components And Accessories For Carrying Out The Study Of Various Hydraulic Components And Hydraulic Circuits Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals 75 Pneumatic Trainer Kit With Compressor: Unit Is To Be Provided With Standard Mounting Board ( Modular Type ) With All Trainer Kits. All The Products Are To Be Provided With Suitable “One Touch Fittings / Push-In Fittings”.Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make , Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentionedalong With Delivery And Maintenance Kit & Manuals. 2 Hard Copies Of Operation Manual To Be Supplied; Installation, Demonstration And Training Of Faculties Are To Be Given. 76 Air Conditioning Trainer : Standard Specifications To Demonstrate The Basic Functioning Of Air-Conditioning. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manual. 77 Refrigeration Trainer: Standard Specifications To Demonstrate The Basic Functioning Of Vapour-Compression Cycle. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals. 78 Plug Gauge: Plug Gauge, Dimension: 25.4-0.5 Mm, Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned. 79 Refrigerator 190 Lit, Direct-Cool Single Door Refrigerator 80 Analog Rough Balance 0-2 Kg, Pan Shape Rectangle Weight Display Analog 81 Analog Rough Balance 0-5 Kg, Pan Shape Rectangle Weight Display Analog 82 Borosil Burette Fitted With Boroflow, 100Ml 83 Borosil Burette Fitted With Boroflow, 50Ml 84 Borosil Burette Fitted With Boroflow, 25 Ml 85 Borosil 3.3 Glass Beaker With Graduation Marks, 1000Ml 86 Borosil 3.3 Glass Beaker With Graduation Marks, 500Ml 87 Borosil 3.3 Glass Beaker With Graduation Marks, 250 Ml 88 Spylx Burette Stand With Clampboss Head And Rod, Burette Stand With Clampboss Head And Rod 89 Transparent Borosilicate Glass Volumetric Flask, 250 Ml 90 Transparent Borosilicate Glassvolumetric Flask, 500 Ml 91 Borosilglass Rod , Outer Diameter: 7Mm, Length: 205 Mm, Material: Polished 3.3 Borosilicate Glass 92 Test Tube Holder, Material: Wrought Iron, Length: 200 Mm, Maximum Opening: 20 To 25 Mm 93 Spherometer: Minimum Length Of Leg 25 Millimeter, Minimum Diameter Of Leg 4 Millimeter, Pitch Of The Screw 1 Millimeter, High Grade Tool Steel 94 Instrument To Observe The Effects Of Frictions Using Inclined Plane: Consisting Of A Wooden Plane 90X18cm Having Adjustment For Setting The Required Angle Precisely Complete With Frictionless Pulley Linear And Circular Scale Pan A Wheeled Trolley And A Set Of Eight Slide Draws Having Bottom Of Different Materials.Base Board Very Superior Quality Having Thick Teak Wood Base, Fittedwith Glass Plate, Complete With Brass Arc, Leveling Screws Pan , Pulley And Iron N.P Roller Export Quality. Heavy Pattern. 95 Stainless Steel Led Digital Vernier Calliper: Mitutoyo, Made In Japan, Length 6, Vernier Constant 0.01Cm , Made Of Stainless Steel, Measure Internal, External And Height Dimensions , Digital Display 96 Verification Of Kirchoffs Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance -1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 20V, Number Of Led Indicators Available To Indicate Power Input -1, Availability Of Dc Voltmeter Available On Board -Yes, Range Of Dcvoltmeter - 0-30Volt, Availability Of Dc Ammeter On Board- Yes, Range Of Dc Ammeter - 0-50 Ma, Number Of Test Points Provided Onboard To Observe Signals - 14, Necessary Patch Cords Available For Interconnection - Yes, Casing Material - Plastic. Two Round Analog Meters For Voltage & Current Measurement, Components Are Mounted Behind The Panel With Printed Circuit Diagram, Connections Are Brought With 4 Mm Banana Sockets, Instrument Fitted In Highly Shockproof Plastics Box, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Student Instruction Manual Will Be Provided With The Trainer Kit, 97 Instrument To Verify Inverse Square Law Of Radiation Using Photoelectric Effect: Type Of Display For On-Board Measurement- Digital, Availability Of Dc Voltmeter On Board - Yes, Range Of Dc Voltmeter - 0-20Volt, Availability Of Dc Ammeter On Board - Yes, Range Of Dc Ammeter - 0-100 Ma, Number Of Dc Regulated Power Supply With Short Circuit And Overload Protection-2, Voltage Range Of Continously Variable Dc Power Supply -20 Volt, Number Of Potentiometers Provided Onboard - 1, Number Of Test Points Provided In The Circuit To Observe Voltage And Current Signal - 5, On Board Schematic Diagram - Yes, Casing Material-Plastic, Number Of Led Indicators Available To Indicate Power Input - 1, Provision Of On-Board Knob For Adjusting The Voltage - Yes.Wooden Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter. On Board Analog Moving Coil Meters , Galvanometer : 30-0-30, Selenium Photocell Mounted In The Metal Box With Metal Base, Lamp Holder With 60-Watt Bulb With Metal Base, Weight : 1.0Kg Approx.Standard Accessories : Selenium Photocell Mounted In The Metal Box, Wooden Plank With Half-Meter Scale Fitted On It, Lamp Holder With Lamp, Patch Chords, Instruction Manual, 98 Conversion Of Galvanometer Into Ammeter Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 99 Conversion Of Galvanometer Into Voltmeter Kit:Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 100 Ohms Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance- 1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 5 Volt, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board -Yes, Availability Of Dc Ammeter On Board - Yes, Casing Material - Plastic.Ohms Law App: To Verify The Ohms Law: Fitted With Slidingrheostat.Onedcvoltmeter, Mo.65&Onedcammetermo-65, Mounted On The Same Base With Terminals, 4 Mm Patch Cords Are Provided With The Trainer Kit For Interconnections 101 Pn Junction Diode Characteristics Kit: Compleate Set With Inbuilt Power Supply & With Digital Voltmeter & Ammeter Compatible For Both Forward & Reverse Bias 102 Boyles Law Apparatus: Burrete Graduated In Cc ( Or Ml ) With 1.0 Cc / Div. Scale Graduated On Both Sides ( Left & Right ) With Same Marking. Both Open And Closed Tubes Can Be Slided Up And Down Over Aluminium Rod. High Quality Synthetic Tube ( 1.0 M Long ) . One Spare Synthetic Tube. ( Withextra 500Gm Mercury ) . Superiorquality, Open&Closedtypeonemeterlongteakwoodboard Onheavy Metal Base Fitted With Leveling Screws Without Mercury But Complete With Pressure Rubber Tubing & Glass Tubes, Routinequality, Doublerodwithopen& Closedendtubes&Pressuretubing. 103 Instrument To Determine The Moment Of Inertia Of A Flywheel About Its Own Axis Of Rotation: Good Quality Stainless Steel Full Setup.Csi Superiorquality Flywheel With Weights , Comprising Of Carefully Machined And Balanced Cast Iron Wheel And Steel Spindle Is Supported On Ball Bearings In Strong Iron Brackets, Thickness: 4.4 Cm, Diameter :20 Cm, Wall Type With Pointer, With Revolution Counter, Set Ofslotted Weights For Flywheel Complete With Weights Cord And Hook. 104 Instrument For Determination Of Spring Constant Of Horizontal & Vertical Spiral Spring Setup: Stand With Heavy Base, Transparent Scale With Mm Resolution, Horizontal Support For Spring, Brightly Colored Stretch Indicator, Three Springs With Identical Diameter And Length, But Different Spring Constants, Three Of Each Spring Included, For A Total Of Nine Springs: Spring Constants Are 5 N / M, 8 N / M, 70 N / M.Consisting Of 45Cm Long Mirrorscale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand, On Metal Stand With Mirror Scale, Superior On Heavy Base, About 50 Cm High For Taking More Readings, Complete With Weights, Helical Spring: Light Spiral Spring With Pointer, Easy To Work With 50 Gm.Weight Complete With Hook For Hanging 105 Stainless Steel Led Digital Outside Micrometer: Mitutoyo: Made In Japan, 0.25Mm-0.01Mm, Least Count 0.01Mm, Made Of Stainless Steel, Digital Display. 106 Linear Expansion Coefficient Apparatus:- Superiorquality , Height 50 Cm, With Brass Rod, Stainlesssteel Finish A 50 Cm Long Expansion Base With A Built-In Dial Gauge And Thermistor.Three Metal Tubes — Brass, Copper ( 99.5%Cu, 0.5% Te ) , And Aluminum ( 98.9% Al, 0.7% Mg, 0.4% Si ) : 6.4 Mm Outside Diameter. A Foam Insulator To Avoid Heat Loss At The Thermistor Connection Point.Thermoplastic Elastometer Tubing With 6.4 Mm I.D.A Source Of Steam Or Hot Water, Such As The Pasco Model Td-8556A Steam Generator.A Digital Ohmmeter Such As Pasco Model Se9589 To Measure The Thermistor Resistance. Leads Should Have Banana Plug Connectors, Such As Pasco Model Se-9750 Or Se-9751 Patch Cords 107 Gclamp-4 Inchirwin 4 Inch / 100 Mm Record H / D G-Clamp T1204 108 Post Office Box-Post Office Box Of Material-Brass And Coil Manganin, Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing 109 Muffle Furnace-Voltage ~230 V Ac, Insulating Maximum Temperatures 1000 C / 1200 C & Working Temperature 930 C / 1130 C Controlled By Digital Temperature Controller Cum Indicator 110 Digital Conductivity Meter-Electrode : Cell K = 1 – Pvc Sleeved Power Required: 230 V Ac 10%, 50 Hz, 5 Va Or 9 V Battery Standard Conductance: Conductance Of 1.000 M Stirrer Speed: 200 Rpm 111 Redwood Viscometer No.1-Material Stainless Steel Voltage 220 Volt Power Source Electric Frequency 50 Hz Phase Single Phase Accuracy + / - 3 °C Readability + / - 0. 5 Degree Capacity 50 Ml 112 Flash Point Apparatus With Stirrer-Voltage-115 V / 230 V, 50 Hz / 60 Hz Measuring Range- Up To 110 °C 113 Daniel Cell-Copper Vessel Complete With Porous Pot & Zinc Rod Diameter ~ 3.5- 4 Inch 114 Digital Voltmeter-Voltage -50-500 V Ac Accuracy ±10% 115 Arsenic Detection Kit-Reaction Time: 10 Minutes Test Type: Test Strip Colour Comparison Results Duration: Rapid 116 Digital Ph Meter-Resolution: 0.01 Ph Range: 0.0 To 14.0 Ph Temperature Controller Display 3 Digit 117 Cube Mould ( 70.6 Mm ) These Are Used For Casting Cement Mortar Test Specimens For Carrying Out Compressive Strength Test Of Cement As Per Is:516. These Moulds Are Manufactured As Per Is Specifications. The Faces Are Machined Flat Within ±0.02 Mm Tolerance And The Inside Dimensions Are Accurate Within ±0.2Mm. Each Mould Is Supplied With A Base Plate. Mould, Steel, For 70.6Mm Cube As Per Is: 10080-1982 Weight: Must Be 6.5 Kg Or More. Should Be Isi Mark. These Cube Moulds Are Made Of Steel. The Tolerance Between Faces Is Maintained At ±0.1 Mm And Plainness Is +0.03Mm. Cube Moulds Carry Isi Mark 118 Digital Rebound Hammer With Calibraton Anvil ( For Concrete Compressive Strength Analysis In The Field And Material Hardness Testing. ) Should Come With Rechargeable Batteries Including Charger. Capabality Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis. Should Conform To Astm C-805, En 12 504-2, Bs -1881- 202 And Other International Standards. Range:10 To 70N / Mm2 Impact Energy: 2.207 N-M Additionally The Following Minimum Specifications Must Be Met. Should Features 16 Character Digital Read Out And Provide Automatic Calculation Of Mean Rebound Number, Compressive Strength And The Median. Should Come With Rechargeable Batteries Including Charger. Capability Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis Is Required. The Necessary Software And The Required Cables For Connecting To The Computer Should Be Provided. A Calibration Anvil Should Be Provided 119 Ductility Testing Apparatus: Ductility Testing Machine Is: 1208 -1978 For Determining The Ductility Of Asphaltic Bitumen, Native Asphalt, Cut Back Bitumen And Blown Type Bitumen. It Consists Of Three Mould Assemblies On A Base Plate. A Separate Briquette Mould ( Total Length 75 ± 0.5 Mm, Distance Between Clips 30 ± 0.3 Mm, Width At Mount Of Slip 20 ± 0.2 Mm, Width At Minimum Cross Section 10 ± 0.1 Mm, Thickness Throughout 10 ± 0.1 Mm ) For Casting The Specimens Is Also Supplied. A Water Bath Of 10 Litres Capacity With A Perforated Shelf Not Less Than 50 Mm From The Bottom Of Bath And A Thermostat Controller For Heater. The Machine Has Two Standard Rates Of Travel Of 1 Cm / Mnt And 5 Cm / Mnt. The Movable Bracket Can Be Arrested Or Released Without Switching Off The Motor By A Clutch Arrangement. Suitable For Operation On 220V, 50 Hz, Single Phase Ac Supply. 120 Length Gauge Conforms To Is:2386 ( Part-I ) Used For Determination Of Elongation Index Of Aggregate. Length Gauge With Isi Certification Mark Is:2386 ( Part I ) , It Consists Of A Metal Plate On Which 8 Steel Pins Are Vertically Mounted With Specified Distances In Between. This Assembly Is Mounted On A Hardwood Base 121 Colorimeter ( Digital ) : Colorimeter, Equipped With Easy-To-Use Conventional Style Controls, Making It Ideal For Routine And Educational Use. Standard 10Mm Square Cuvettes, Semi-Micro Volume Cuvettes, Flowthrough Or Pour In / Suck Out Cells Can All Be Used With The Standard Sample Holder. Wavelength Range: 400 To 710Nm Wavelength Selection :: 8 In-Built Gelatin Filters: 430, 470, 490, 520, 540, 580, 600 And 710Nm Measurement Ranges:: 0-100%T, 0-1.50Abs, 0.1 To 1000 Concentration Bandwidth:Typically 40Nm Blank Drift:: 2% / Hr After 15 Minute Warm-Up Photometric Linearity :: 1%T Light Source :: Tungsten Filament Lamp Output:: Analogue, 10Mv Per Digit Power: 230V, 50Hz Size ( L X W X D ) :: 300 X 355 X 120Mm Weight:: 3Kg 122 Cod Test Apparatus: Cod Test Sample For Dry Bath Heating. Temperature 5+ 150 ◦C + / _ 1◦ C. Digital Controller With Heating Block. Sample Being Digested Within 2 Hours With Titration Method Bod Bottle Capacity : 300 Ml B.O.D. Incubators Has Been Designed Especially For Biological Oxygen Demand Determination & Other Applications Like General Incubators, Serum Studies & Enzyme Assays Test. We Can Also Customize The B.O.D. Incubators To Suit The Varied Requirement Of The Clients With In Stipulated Time Frame. Inner Chamber Made Of S.S.304 & Outer Chamber Made Of M. S. Powder Coated Full Length Inner Acrylic Door Permit Inspection Of Specimens Without Disturbing The Tem. Temp Controlled By Solid State Digital Controllers Housing All The Control With Pt-100 Sensor Illumination Light Are Provided For Viewing With Door Limit Switch. Cfc Free Hermetically Sealed Compressor Provide Temp. For Below Ambient Condition. Air Circulation Fan For Maintain Temp. Uniformity Throughout The Chamber. The Chamber Is Provided With Modular Removable Shelves Made Of S. S. For Complete Flexibility In Use. To Work On 230 Volts 50 H2. 123 Validation Protocols : Iq Oq & Pq Documentation With Calibration & Tradability Certificate Of Controller. Safety Features : Built In Temp Deviation Audio Visual Alarm, Safety Thermostat For Overshoot Temp. Cut Off System. Hrc Fuses For Compressor Heater & Mains Time Daily Circuit For Safety Of Compressor. This B.O.D. Incubator Is Available In Below Sizes: Size= 6Cu.Ft Inner Dimension W X D X H = ( 50 X 50 X 70 ) Cm Capacity= 175 Ltr No. Of Shelves= 2 124 Colony Counter: Working Temperature 5 To 50 ◦ C, 4 Digit Red Led Display, Petridish Holder, Fluorescent Lamp, Zero Reset Button, Dimension-30 ( W ) X33 ( D ) X10 ( H ) Cm, Net Weight 6.5 Kg. 125 Digital Nephelometer ( Turbidity Meter ) :Conformance:: Iso 7027 ( Ir Source ) Epa 180.1 ( Tungsten Lamp ) Measurement Range:: Auto-Ranging From 0 - 1000 Ntu Principle:: Nephelometric Non Ratio Accuracy:: + / - 2% Of Reading Plus 0.01 Ntu Resolution:: 0.01 Ntu ( 0 - 9.9 Ntu ) , 0.1 Ntu ( 10- 99 Ntu ) , 1 Ntu ( 100 - 1000Ntu ) . Response Time: < 6 Sec Display:Lcd , 3 Digit Light Source: Tungsten Filament Or Ir - Led ( 860Nm ) Power Supply: 120 - 240 Volts Ac Sample Cells: 30 M Shipping Dimensions :: 27.3X25.4X9.5Cm ( 10.7 X 10 X 3.75 ) Shipping Weight:: 1.92 Kg ( 2.9Lbs ) 126 High Volume Air Sampler: High Volume Sampler ( With Gaseous Attachment ) Technical Specifications :Flow Rate: - 0 To 1.8 M3 / Min Free Flowparticle Size: - Particles 0 To100 Microns & Below Collected On Filter Paper Holder. Spm Bigger Than 100 Microns Collected In A Separate Sampling Bottle Under The Cyclone. Sampling Time: - 24 Hours... 127 Low Volume Air Sampler: State Of The Art Microprocessor Electronics Flowrate And Volume Totalizations Displayed Are Temperature And Pressure ( 4 Options Available ) Classical Stp 0ºc, 760 Mmhg Normal T And P 20ºc, 760 Mmhg Modified Normal T And P 21.1ºc, 760 Mmhg Standard Ambient T And P 25ºc, 760 Mmhg Elapsed Time Meter Auto Zero Calibration Feature Of Flow Sensor Bright Led Display Flow Rate Accuracy Within ± 4% F.S. Rs-232 Communication Port W / Operator Selectable Download Frequency For Real-Time Data Auto Shut-Off On Time Or Volume 110 – 120 Vac, 50 / 60Hz; Single Phase 128 Hydraulic Bench: Top Tray: Size 1000 X 700 X 100 Mm ( Approx ) Water Circulation: 1 Hp Pump. Flow Measurement: Using Measuring Tank, Capacity 40L. Sump Tank: Capacity 100 Ltrs. Control Panel Comprises Of: Standard Make On / Off Switch, Mains Indicator, Etc The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure 129 Crushing Value Test Apparatus: Consists Of M.S.Cylindrical Container 150 Mm ±0.5Mm Dia X 130Mm To 140Mm High With Base Plate 200 To 230 Mm. / Sqr X 6Mm Thick. A Plinger Of 148Mm ± 0.5Mm Dia X 100 To 115Mm High. Supplied Complete With Tamping Rod, 16Mm Dia X 600Mm Long, One End Rounded. And 1 No. Metal Measure 115 ± 0.5Mm Dia X 180 0.5Mm High. Consists Of Both End Open Cylinder, Base Plate, A Plunger 130 Digital Ph Meter: Measuring Range Resolution Accuracy Ph Range 0 To 14 Ph ( Min. ) 0.001 Ph ± 0.002 Ph Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Rel. Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Temperature Mtc -10.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Atc -5.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Compensation :Automatic And Manual Temperature Compensation Display : It Should Have Thin Film Transistor ( Tft ) Display Of More Than 4 Inch Color ( Blue / Red / Green / Yellow ) Display For Better Vision Of Readings With Clear And Well Arranged Icons Of Parameters Like Ph, Temperature, Mv, Date & Time Etc. Ingress Protection Level : It Should Be Ip54 Complied Protection Level. Power Requirements : It Should Be Operable With 9 -12V / 10W Dc Adapter.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
13.
Housing Urban and Rular Development #10235078 Price Bid
Tender For New Construction Of Cheriyan Nagar Library Chennai; 1 DISMANTALING WORKS 2 Dismantling etc., all complete 3 Brick / Stone Masonry in lime mortar walls 4 Dismantling RCC by manual / by using deploying machineries 5 Doors and Windows including removal of frames, hinges and fastenings 6 CIVIL WORK 7 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size bouldersand Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum 8 Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 40 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 9 Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 10 Supplying and filling in foundation, basement, etc with filling Gravel inwellrammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 11 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 12 Providing pre-constructional Antitermite treatment including cost of chemicals labour as per standard specifications for preparing the area for treatment by spraying chemicals and other incidental charges etc.. complete. The rates should be for antitermite treatment from the plinth beam and brick masonry with super structure in contact with the back fill earth and at the junction of the walls.The top surface of filled earth for flooring and the soil along with the perimeter of the building by making holes with the crow bar and poured 5% termicide “Chloripyrifos” and sprayingthe same termicide solution on the wooden frames and treating the other periphery of buildings etc., complete in all respects as per IS 6313 (part II) / 1981 and as directed by the departmental officers. 13 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc.,Rate to include all materials, labour charges, wastages ,placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by theClient / Engineer-in-charge. 14 For Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members 15 for plane surfaces such as rectangular or square rcc columns, sunshades, topand bottom slab of rcc boxing, etc. 16 Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members 17 Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. 18 For FoundationandBasement 19 For Ground Floor 20 For First Floor 21 For Second Floor 22 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 23 Supply and constructing Fly ash Brick (230 x 110 x 75mm) masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure usingFly ash Bricks of size 230x110x75mm etc. Rate to include all materials, labour charges, wastagesfor working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 24 For Ground Floor 25 For First Floor 26 For Second Floor 27 Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails. 28 Upto 3 M Height 29 3 m to 5.5 m Height 30 5.5 m to 7.5 m Height 31 7.5 m to 10 m Height 32 10 m to 12.5 m Height 33 Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of P sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 34 Plastering 15 mm thick for external surfaces with Cement Mortar 1:5 (1 of cement : 5 of P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturers Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate includingcost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 35 Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine river sand)according to specifications. Rate shall include for providing GI chicken mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportation charges, loading, unloading, preparation of surface, necessary hacking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing,cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 36 Painting the new plastered walls with two coats for Interior Plastic Emulsion paint approved quality and colour over a priming coat, with two coats of wall putty including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 37 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 38 UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work 39 UPVC VentilatorSpecification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chamberedsections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer before use on work 40 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 41 Painting the new Iron work with two coats of Ready Mixed Enamel Paint of aproved quality and colour over the existing priming coatincluding the cost all materials etc.,complete, in all floors and as directed by the Departmntal Officers. 42 Providing and fixing Vertical blinds , quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete. 43 Supply and laying with best quality the following materials of Ruby Red, Raw Silk Granite Slabs (Super Fine Polished with Machine Cut Edges) of sizes 4’x2’ and above 18mm to 20mm thick Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 44 Supply and laying with best quality the following materials of Sinthetic Grey, Paradise and similar varieties Granite Slabs Granite Tiles - (Superfine Polished with Machine Cut Edges) of size 2’0” x 1’0” and above 10mm Thick including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 45 Nosing for Granite Slab-Single Nosing 46 Grooving the Granite Slab 47 Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Executive Engineer before use on work 48 Paving the floor with design Antiskirt Ceramic tiles (colour and shade as directed) of size 305 mm x 305 mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement. 49 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 50 Supplying and filling the sunken slab area by BRICK-BATCOBA by adding CICO NO:1 of approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Naterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturers specification after entire completion of laying pipes, sanitary fittings etc Rate including all mater aaod and lifts, working materials, labour charges wastages with necessary lead and at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specificatior and as directed by the Client/ Engineer-in Charge 51 Including applying two coats not less than 2 nm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No. 1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturers specifications and as directed. 52 Waterproofing: Providing and Applying CFTRI approvedtwo component flexible polymer modified acryliccementitious waterproofing coating with a mix ratio of(5 Liquid :7 Powder) to the RCC surface of the UGT/OHT tankapplied @ 2.2kg/m2 in 2 coats to achieve1.2mm DFT, having Elongation at break >120% asper ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right anglesof wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completelyas per specification. Followed by applying 15 mm thick dimensionally stable fibrous reinforced cementitious structural grade dual shrinkage Polymer Mortar on as protective plastering @ 29kg/m2. The material having Compressive strength of 38 MPa at 28 days as per EN 12190, Adhesive Bond Test, >1.5 Mpa as per EN1542, followed by Water curing by sprinkling water for 3 times a day for 5- 7 days. Followed by applyingtwo component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti algae, antifungal, Non-toxic, hygiene cum damp-proof coating Certified by CFTRI as per 21 CFR 175 – 300 of US – FDA, having mixing Ratio (Base: Hardener: Water) – 1:1:1 to be applied @ 0.35 Kg/m2 in 2 coats. Ensure that this coating is applied over the protective plaster. The Waterproofing material shall have Specific Gravity: 1.2, Water vapor permeance: 244.48 g/m2/24 hrs, as per IS 7809/Pt 2/1977, Adhesion strength: 2 N/mm2 as per ASTM D 4541: 02. The finished cost to include surface preparation completely as per specification 53 Finishing the top of roof with one course of Solar Reflective ceramic tiles of size 305 mm x 305 mm x 7 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 54 Supplying And Fixing Rubber Moulded Interlocking Paver Blocks Against Available Edge Restraints 83 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)) 55 Supplying and fabricating of MS structural steel supports for various applications using channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above. 56 Providing Teak wood wrought and put up for frames of doors, windows and ventilators and any other similar joinery works including cost of country wood scantlings and labour charges for manufacturing the frames and fixing hold fasts and fixing in position etc. for all lengths as per architect designs. 57 Best Indian Teak Wood Panelled door in double shutters with frames 100x75mm at side,verticals and top. The shutters shall beof 40mm thick with moulded panels in 20mm thick planks,6Nos.of iron hold fasts fixed in c.c.1:2:4 6Nos.of butt hinges 125mm long including wind appliances, furniture,iron fittings,1No.of iron padlock 15cm long for locking arrangements and fixing inposition,etc.,complete.(ISI STD) 58 Varnishing the new wood work one coat with best shellac and with fine best varnish of approved quality varnish of teak wood natural finish including preparation of surfaces with sand papering in patty priming etc., complete complying with standard specification and as directed by the Departmental officers. 59 Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter 60 Best Indian Teak Wood panelled door shutter for single leaf door. The shutter shall be 40mm thick with moulded panels in 20mm thick planks inclusive of 3 Nos.butt hinges 125mm long,furniture iron fittings,1No.of jappened hooks and eyes 200mm long and 6mm thick and iron pad lock 15cm long including fixing inposition,etc.,complete 61 FALSE CEILING WITH GYPSUM PLAIN TILES Providing and fixing true horizontal level false ceiling using SAINT -GOBAINGYPROC or Equivalent make with 24 mm Grid system using hot dipped galvanised Steel Section, exposed surface chemically cleaned caping prefinished in backed polyestar paint wall angle of size 24mmX24mm used in the periphery of the ceiling fixed to the wall partition R.C. Column bandwalls with the help of screws Column bandwalls with the help of screws at 600mmc/c. Main runner of size 32X24mm suspended at1200mm c/cmax by using securely fixed to the structural soffit of R.C.C. slab by using 6mm Nylon Rawl plug at every 1200mm (Max) and 1200mm long Cross Tee of size 24X24mm to interlocked between Mainrunner at 600mm c/c (max) to form a grid of 1200mmX600mm. 600mm long Cross Tee of size 24X24mm is inserted to form a grid of 600mmX600mm and finally tiles laying 62 Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), including putty works. 63 Supplying and Fixing of English Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 64 Supplying and Fixing of Tamil Stainless Steel Letters of 25cm (10”)size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 65 upplying and Fixing ofEmblem (15”) Stainless Steel size and approved colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes 66 Supply and fixing of Pre-fabricated Structural Steel, coated galvalume ROOFING SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top & side of ribs for better composite action including Flashing for joints, and all incidental charges. 67 Supplying and erecting in position LIGHT DUTYSTEEL TRUSSES as per the drawing.The materials and design of the trusses should confirm to the relevant Indian Standard specification.The trusses shall be procured only from reputed manufactures oftrusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design.The rate quoted shall include the cost oftrusses.Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc.,The roof sheeting shall project 0.762m from the eves purlins. 68 Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. 69 Providing, supplying, and fixing factory-manufactured pre-fabricated insulated roofing panels made of PUF (Polyurethane Foam) sandwiched between two metal skins, comprising pre-painted galvanized iron (PPGI) sheets of 0.5 mm thickness on both sides with 40 mm to 50 mm thick CFC-free polyurethane foam core of minimum density 40 kg/m³, having tongue and groove jointing with cam-locking arrangement for weather-tight sealing. Panels shall have minimum overall R-value of 6.5 and thermal conductivity not more than 0.022 W/m·K. Roofing to be supported over structural purlins/trusses using self-drilling screws with EPDM washers, sealants, fasteners, ridge covers, and flashing, complete. Rate includes supply, transport, hoisting, cutting to size, edge finishing, foam taping at joints, sealing, labour, tools, scaffolding, and all incidentals for a fully finished, insulated, and weatherproof roofing system as per manufacturer’s specification and as directed by the Engineer-in-Charge. 70 Brick Wall Cladding Nuvocotto Edge Cut Wall Tiles Natural Red finish in size 230mm x 76mm x 15mm 71 Brick JalliNuvocotto Camp Jallie Natural Red finish in size 200mm x 200mm x 60mm 72 Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT 73 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 74 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 75 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 76 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 77 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 78 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 79 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,. 80 PLUMBING 81 Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, unioncoupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. 82 Supplying and fixing Stainless Steel Health Faucetwith all the accessories etc, 83 Supply and fixing White without PedastalWash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia B Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples,15mm CP Pillar Tap etc (The wash basin should be got approved by Executive Engineer before use on works). 84 Providing and fixing C.P. Angle stop cock of approved quality conformingto IS:8931 :15mm nominal bore 85 Providing and fixing Brass Chromium Plated Towel Rail 60cm long and20mm dia with Brackets etc,. 86 Providing and fixing Brass Chromium Plated Soap Tray of size 150mm x 100mm 87 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines. 88 75 DIA 89 110 DIA 90 Providing, fixing and testing of PVC waste pipe of agricultural sereis conforming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. 91 40 DIA 92 Providing, fixing and testing of PVC floor- trap 110 dia with necessory of multitrap connection (heavy duty hinged type) with brass CP frame & cover (100 mm x 75 mm). Trap of 100 mm dia inlet and 75 mm dia outlet fixed on a bed of cement concrete etc.complete. (The frame and grating shall be approved by Architects) 93 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Concealed On Wall) 94 20MM DIA 95 25MM DIA 96 Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 97 25mm dia Cost of gate valve 98 32mm dia Cost of gate valve 99 Providing, installation, testing and commissioning approved make CIY-type Strainer conforming to IS standardwithnecessary companion flanges, neoprene gaskets(10Kg/sq.cm. pressure rating) nuts and bolts including all the accessories to complete the work as per the specifications. 100 32 mm nominal bore 101 Providing, fixing and testing of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines.(Pipes Runningin the Shaft & below ground level) 102 75 DIA 103 110 DIA 104 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water Providing, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(Pipes Runningin the Shaft & below ground level) 105 25MM DIA 106 32MM DIA 107 Providinging and fixing in position PVC Vent cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before use on works). 108 75MM DIA 109 110MM DIA 110 Providing and fixing GI. puddle flanges (IS; 1239) fabricated out of 6 mmthick M.S. plate of size 300 x 300mm plusdia of pipe of 750mm long pipe pieces fixed to RCC wall of water tanks. Including painting with two coats of primer complete as required. The entire fitting shall be hot dipped galvanized.(Rate As per Quotation) 111 32 mm dia 112 40 mm dia 113 50 mm dia 114 65 mm dia 115 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:(Rate As per Quotation) 116 Constructing in site of Inspection chambers comprising burnt brick/solid block masonry walls of 230 mm thk., built in CM 1:4 over M-15 CC bed of thickness 100 mm ,Heavy duty RCC precast cover (SFRC), benching in CC M-15, internalfaces plastered smooth in CM1:4, 15mm thick and outside Rough Plastered with CM 1:6, 15mm thick including necessary earth work excavation returning and refilling and disposing surplus soil as directed by the Engineer in charge. 600x600 mm size internal and depth will 450mm to 1200mm & 900x800 mm size internal and depth will 450mm to 1200mm. (Rate As per Quotation) 117 600x600 118 Making of core cutting in RC slab of maximum 150mm thick of following diameter. 119 a) 150 mm dia 120 b) 125 mm dia 121 Providing and fixing MS slotted angle iron brackets, hangers, MS grip bilts,universal clamps with thereaded rod,supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc., as per detailed drawing for supporting soil, waste and rain water pipes and water Providing pipes in shafts with suitable MS clamps, bolts, anchor bolts, nuts and washers fixed on shaft walls/outer walls etc., The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 0.08 mm thick conformed to IS 1239 etc., complete as directed by the employer. 122 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.(600x600mm) 123 Providinging, installing, fixing, jointing, testing and commissioning of PVC Storm water pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cementfollowed by application of leak proof adhesive like FRP paste,The quoted rate shall include necessary earth work, fittings,pipe to be laid below ground level in trenches upto required depth, dewatering, jointing of pipes, water testing and setting,refilling, and making good the same complete as required. 124 110 DIA 125 Providing, fixing and testing of Terrace Rain water outlet (110dia) with all the accessories etc,. 126 INTERIOR 127 BOOK SHELF 1 - 2100 x 400 x 2100 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 128 MAGAZINE HOLDER - 600 x 250 x 1200 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 129 DISPLAY UNIT AT RECEPTION - 1200 x 300 x 600 Carcass are 16mm MR Ply with 0.72mm Backer Laminate on both Sides, Shutters are 16mm MR ply with One Side 0.72mm Backer Laminate & Front side 1mm Matt Finish with 2mm PVC Edge Band finish. 130 LEDGE 5000 x600 x 750 Panels are 16mm MR ply with 1mm Matt Finish on both sides with 2mm PVC Edge Band finish mounted to the wall. 131 4SEATERLEARNINGCENTRETABLE-2000mmx1000mmx750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thick 132 6SEATERLEARNINGCENTRETABLE-2400mmx1000mmx 750mm -TABLE TOP: 25mm pre laminated particle board with 2mm PVC edge banding. MS 120 LEGS: Pillar are made out of heavy duty CNC cut & bend section of 120 degree which is engineer designed, E250 grate of 2.5mm thic 133 READING CHAIR - Lounge Chair Uphostered in EPU Leather. Sleek Four Star Fixed Base With Revolving Function In Warm White Powder Coated Finish. Three Dimensional Lumbar Support Design. Model number SCML-SF30.1. Bosses Cabin or equivalent. 134 ROLLINGCHAIRS-Medium back chair with metal grey back frame, metal grey adjustable PU armrest (4D), moulded foam seat with metal grey shell, STG drive-by-wire mechanism with 4 position locking, polished aluminum alloy five-star base with metal grey PU castors. Model number CHT66SW. Bosses Cabin or equivalent. 135 SINGLESTUDYCHAIR:Multi-Purpose Chair Upholstered In Water Based PU Leather. Cushioned Seat and White Ash Solid Wood Legs. Model number SCMF-XCB33 - Latte Brown. Bosses Cabin or equivalent. 136 LOCKER & FOOTWEAR STORAGE- – 1950x375x470mmPLU main 2 DR numeric lock with envelop slot – 1950x375x470mm. Godrej interio or equivalent. 137 RECEPTIONDESK-1800mmx650mmx 1050mm- Reception Table In Matt White and Oak Laminate. IncludesStorage Cabinet and WireManagement Grommet OnDesk. Top Model number 28ROB003(BCRMB-OB 03). Bosses cabin or equivalent. 138 Seamlessly shift from warm, cozy tones to cool, vibrant whites (also known as tunable white or human-centric lighting) is an advanced JS3 Serial LED Connecting System LED lighting technology that allows users to adjust the color temperature of the light output — from warm to cool — to suit mood, time of day, or functional needs.LED Type: OSRAM SMD 3030Iceil™ Supply of OSRAM 24V LED Module Color Temperature: 2700K to 10000K with Iceil IP67 Drivers CRI: ≥90 – Delivers natural, true-to-life color accuracyMounting: High-performance aluminum rigid PCB– Ensures excellent thermal management and long lifespanConfiguration:– Each block features 4 high-quality LEDs– Optimized light spacing for shadow-free illumination– Viewing Angle: PMMA lens Ultra-wide 160° beam spreadDimmable: No Compatibility:DALI, Tuya Smart App, Alexa, & Google Home. Touch Panel, and RF Remote control optionsPower Consumption:– Only 4-6W per sq.ft– Energy-efficient yet high-lumen outputLighting Quality:– Uniform light diffusion across the stretch ceiling– Suitable for both translucent and printed membrane typesIceil™ Power Supply: Wide Input Range 100-305AC (Class I), Surge Protection with 6KV/4KV, Working temp. -20~ +45°C 20% ~ 90%RH, Metal case IP67, Power factor <0.98LED and Power Supply Warranty: 5 Years or 50,000 Hours (whichever comes first)Certifications: CE & RoHS Certified – environmentally safe and globally compliant Installation of pre-supplied LED lighting fixtures, associated drivers, and control systems, including all necessary mounting, wiring, terminations, and system integration by qualified technicians.The scope includes:Installation of LEDs as per lighting layoutMounting and secure placement of LED drivers and control gear in accessible locationsElectrical connections between LEDs, drivers, and controllers using appropriate cablingTesting of each circuit and commissioning of the full lighting setupRate Includes: Skilled labor, tools, basic fasteners, and all on-site installation efforts.. 139 Iceil™ supplies exclusively premium-grade of European Standard PVC Thermo-Stretchable Membrane, complying with BS1-D0 as per EN 13501-1 and Class A as per ASTM E84-2024 fire safety standards. The membrane is precision-cut to the required shape and size, with perimeter edges high-frequency welded with harpoon inserts. Installation is carried out using a durable aluminium profile framing system, ensuring a seamless, secure, and aesthetic ceiling solutionThickness 0.18 mmWeight 250–300 gsm ± 2%Light Transmission Up to 75% (for translucent type)Width Up to 5 meters (seamless); larger areas joined with invisible seamsStretching Method Thermal installation at ~50–60°C using hot air gas blower Fire Rating BS1-D0, as per EN 13501-1, ASTM E84-2024 Class A Explanation: B = Very limited contribution to fire, s1 = Little or No Smoke Production, d0 = No flaming droplets or particles Moisture Resistance 100% Moisture-proofUV Resistance Yes – does not yellow or degrade indoorsEnvironmental ROHS compliant, Phthalate-free, UL Certified - Tri-O-cresyl phosphate < 50mg per kgCertification Manufactured in ISO 9001:2015 certified factoryWarranty 10 Years (under standard indoor conditions) Installation of pre-supplied Stretch Ceiling System, including site preparation, profile fixing, membrane stretching, and finishing using specialized tools and skilled labor.The scope includesFixing of aluminum/PVC perimeter profiles as per approved ceiling layoutHeating and stretching of the pre-cut stretch ceiling membrane on-siteAlignment, tensioning, and seamless fitting of membrane onto the installed profilesIntegration of cutouts for lighting, sprinklers, air conditioning vents, speakers, etc.Final finishing, cleaning, and handover of installed ceiling areaRate Includes: Skilled labor, installation tools, on-site execution, and necessary accessories for completing the installation of the stretch ceiling. 140 The Iceil Wooden Box is built from durable MR/BWP-grade plywood, featuring a 12mm back board, 18mm vertical sides (150mm height), and dual 8mm flexible plywood layers for curved designs. The 150mm depth accommodates lighting and structural needs.Finish Options: White emulsion or PU-coated interior, or white reflective laminate; exterior customizable per client.Mounting: Reinforced corners, cross supports (wood/MS) every 2 ft, fixed with dash fasteners, threaded rods, or MS supports.Stretch Ceiling Compatibility: Suits Iceil’s PVC Harpoon Profile System with aluminium profiles for welded membranes.Lighting Integration: Base for rigid block LEDs with ventilation slots for heat dissipation. 141 Wall paper 142 Carpet Flooring 143 160A LT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, Wall mounted, single front,14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars,internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The Breakerof 160A TPN MCCB and 1set of 160/5A CT with TNEB Metering provision and 1nos of 160/5A CT for APFCR . (Rate as per Quotation) 144 Supply and Erection of electrical panels Boards 145 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type Three Phase Changer Over panel of size (H 2100 X L 2000 X D 300 ) mm with suitable to accommodate 100A 4 pole Three phase Change Over Switch-1No. as incomer for EB Source and as incomer for DG Source, 6nos of 63A 4Pole MCCBs and 4nos of 32A 4Pole MCCBs compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 146 Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steelmade up of 2mm powder coatedMCCB Indoor Type 50 kVAR panel of size (H 1800 X L 1800 X D 300 ) mm with suitable to accommodate Incomer 1 Nos 63A 4Pole MCCB, 7nos of 25A 4Pole MCCBs with 7% 1-10 kVAR Capacitor banks in compartment as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 25x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost ofWeldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S 147 VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixingof4way verticalTPMCBsheetsteel Industrial Type TP MCB DB with IP54 Protection of surface type fitted with bus bars and neutral links with1 No. of 63A FP MCB as Incoming and 4 Nos.of32A,10KA Triple Pole MCB in Flush with wall and making good of the concealed portion with earth connection.( Industrial Type TPMCB DB with IP54 Protections) 148 Supply and fixing of 7 segment8 way63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic doorcover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 63 A TPN MCB, 10kA, / Isolator and another separate 4 way for accommodating one no. 63 Amps, 30 mA, 4 pole ELCB / RCD (totally 8 ways in one segment) and 24 nos 6-32 A, 10kA, SP MCB / Isolators ( totally 24 nos.) for outgoing in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. withthe following in flush with wall with earth connection only. 149 Supply and fixing of 65 mm dia. (2 -1/2) GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonry pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 90W LED Streetlight fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour 150 Supply and Fixing of24W Ceiling Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 151 Supply and Fixing of11W Bulk Head Lightwith PVC unsheathed copper leads from terminals to the fitting.(Make : Philips/Crompton/Havelles ) 152 Supply of surface-mounted 24W LED wall lights to the ideal solution for a variety of indoor lighting applications. Direct illumination of the wall and surrounding surface, as well as accent lighting for vertical structures. Featuring an aesthetically pleasing, robust construction, these lights are built to withstand all weather conditions, ensuring long-lasting performance and durability • Luminaire body made of extruded aluminium alloy (grade 6063) with die cast aluminium components and non corrosive SS fasteners • Non yellowing UV stabilized translucent polycarbonate diffuser • Luminaire integrated with 24W LED • Die-cast aluminium mounting base for easy installation onto the wall • Surface mounting on wall using hardware after connecting to the power supply • IP : 65, IK : 08 • Cable entries for through-wiring of mains supply cable • Integral constant current power supply • CRI ( Ra) : >80 • Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply • Available CCT : 2700K, 3000K, 4000K, 5700K. Driver Power Supply : Integral, Input Voltage : 230-240Vac, Frequency : 50-60 Hz, Power Factor : ≥0.95, THD : <10%, Surge Protection : 4KV, Efficiency : >85%, Symmetrical Light Distribution.Product Finish options: Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. CE & BIS Certified. Inhouse NABL accredited lab. Brand Name : Philips, Product SKU : 919215850004 153 Supply of LED Linear Pendant luminaire is a versatile solution for projects that demand high quality of the lighting system and high visual comfort. With its modular design, the Revo-L can be used as an individual fixture or as a combination of luminaires put together in continuous lines • Luminaire made of extruded aluminium for better thermal management • polycarbonate diffuser for optimum optical performance, • Hexa-cell (Matte Black) secondary reflector • Suitable for surface and suspended mounting • Supplied with standard suspension kit (1metre).• Cable entries for through-wiring of mains supply cable • Integral power supply • Suitable for operation on 240V,50Hz single phase ac supply• Driver Power Supply : Integral, Power Factor : >0.90, THD : <10%, Surge Protection : 4KV-6KV, Efficiency : >85%, IP 44 Rating.• Dimension: 1188 x 36 x 75, 2365 x 36 x 75, 3540 x 36 x 75.• Wattage Options : Upto 40W, Upto 80W, Upto 120W.• Mounting: Pendant Mounting, Pendant Mounting, Pendant Mounting, Surface Mounting, Surface Mounting, Surface Mounting • Product Finish options: Pure polyester powder coated, RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 9016 Traffic White • CE & BIS Certified • Inhouse NABL accredited lab. Philips SP170P LED25S-6500 PSU W5L113 OD WH Smartbright Linear 154 Supply of Input power : 8W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire madeof extruded aluminium alloy (grade 6063), die-cast aluminium of high corrosion resistance and non corrosive stainless steel fasteners. Translucent polycarbonate diffuser. Pressure die cast aluminium mounting plate Ø100.5mm x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD55 for surface mounting on floor. The base plate have a cable entry hole of 70 x 24 mm dia at the center. Single cable entrance via PG7 cable gland. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.9, THD <10%, Surge protection 2.5KV. Luminaire dimension : 106mm diameter x 565mm height. CE & BIS Certified. Foundation Bolt - 2 Nos of M8 Foundation J Bolt Length 150mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each BoltInhouse NABL accredited lab. PHILIPS Bollard BCP100 LED 10W PSU GR L 750mm Solar Light 155 Supply of LED Linear Lighting to suit ceiling / wall is a slim and elegantly designed fixture, suited for varied applications offers a uniform, glareless and soft lighting.Al. Profile Housing Dimension: 1000 x 17 x 8, 2000 x 17 x 8Mounting: Surface Mounting, Product Finish: Anodized Aluminum• Luminaire made of extruded aluminium for better thermal management • PC clear / semi clear matte diffuser for excellent diffused lighting experience throughout the life of the fixture • Designed for mounting on ceiling / wall • Cable entries for through-wiring of mains supply cable • To be used with LED strip & power supply unit of suitable rating. Brand Philips Profile Shine 240 LEDs/m LED Strip | 3000K Warm White | High Brightness Linear Strip for Cove, False Ceiling, Architectural, Ambient Lighting 156 Supply of 24V 2835 Flexible LED Strip, 12W/m, Non-Integral, CCT: 2700K, 4000K, 6500KDimension: 5m / Roll, IP : 67, Brand Name : K-Lite, Code : 7289 or equivalent 157 24V Power supply, IP 67 Rated SMPS suitable for 24V LED Strip lights. Wattage: 150W, 24V Series Waterproof IP67 Power Supply24Vdc 6.25 Amps 150W Power unitDimension: 313 x 43 x 34IP : 67,Brand Name : K-Lite, Code : 8198 or equivalent 158 Supply and fixing of Fans and Air Circulator 159 Supply and fixing of 1200mm (48) sweep AC ceiling fan 5 star rated complete ( Higher end)with 2 module 100W fan step regulator (Higher end)with 2.5 metre down rod with fan clamp, and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 160 Supply and fixing of 600mm wall mounting Air circulator and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessaryaccessories and hardwares as required. (SD -563) 161 Supply and fixing of 300mm(12)sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessaryaccessories and hardwares as required. 162 Supply and fixing oflouvers shutter arrangements for 300mm(12)sweep (Heavy duty) AC Exhaust fan complete 163 Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required. 164 Supply and Laying of 3 1/2 x 50 sq.mm. PVC Al.Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 165 Supply and Laying of 4C x 16 sq.mm. PVC AL. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.Main Panel to DB 166 Supply and Laying of 3C x 2.5 sq.mm. PVC Cu. Armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make goodMain Panel / DB to Street Lights 167 Supplying & Laying 120mm/103.5mm HDPE Pipe as per requirements including excavation & refilling. 168 Supply and fixing of double compression brass cable gland for following Aluminium conductorXLPE insulatedarmoured cable of 1100 V grade with earth connection. 169 Supply and fixing of brass cable gland for3 1/2 Cx 50 Sq.mm PVC LTUGAl. Armoured cable with earth connection 170 Supply and fixing of brass cable gland suitable for4C x 16 PVC Al. Armoured LTUG cable with earth connection. 171 Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cableLTUG cablewith earth connection. 172 Supply and providing cable end termination of the following sizePVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable) 173 Supply and providing cable end termination of3 1/2Corex 50Sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. 174 Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Al. Armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. 175 Supply and providing cable end termination of 3C X 2.5 SqmmPVC LTUGCopper cable with necessary copper cable sockets by crimping etc, with electrical connection complete. 176 Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End (SD-375) 177 Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil)Higher End (SD-385) 178 Supply and fixing of 25A Flushtype Wall Socket 25A DPMCB complete set for ACPlug inflush with wall with earth connection (For AC Plug) 179 Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigidpipe Concealed inwall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copperwire and making good of the concealed portion withsuitable colour. ( SD 430 ) 180 Supply and Run of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe onconcealed wall and ceiling with continuous earth wire connection with painting of suitable colour. 181 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp andwithcopper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonrySD-233 182 Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection 183 Supply and Run of 1 of25.6.25 mm Al. Flat on wall / floor / ground for earth connection. 184 Supply and Run of 1 of25.6.25 mm Cu. Flat on wall / floor / ground for earth connection. 185 Supply, Installation, Testing and commissioning of 40 channel NVR with 4TB HDD * 4nos, Up to 40-ch 8 MP IP cameras can be connected, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by up to 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1/VGA1 outputs provided  HDMI1 Video output ) resolution Storage and Playback, Up to 4SATA interfaces and 1 eSATA interface for HDD connection, Support upto 6TB capacity for each HDD, Smart search for efficient playback.(Make: Hikvision/Dahua/Panasonic) 186 Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse.All including suitable camera stand and accessories. (Make: Dahua/Panasonic) 187 Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Dome Each Cameras, 1/2.8 CMOS,4 MP 2592 x1520 or better , triple stream, Min. Illumination required 0.005 Lux/F2.0 (Color,30IRE), 0 Lux/F2.0 (IR ON), 140dB True WDR, triple stream,3 to 12 mm, F1.4 to 2.8 , MFZ, Backlight Compensation, Highlight Compensation 3DNR, Privacy Mask, Internal/External Smart IR LEDs with up to 50m IR distance, H.265& |MJPEG, Inbuilt Video Analytics: Smart Motion Detection, Intrusion Detection, People Counting, Multiloitering, Face Detection, Line Crossing, Missing Object detection, [Unattended Object Detection. THe camera shall have inbuilt cyber security FIPS Chipset.Audio Stream Full Duplex, 1TB SD card support, IP 67 & IK10, Alarm: 1 In & 1out, PoE, H.265 High Profile and MJPEG, PoE Class . Certifications: ONVIF Profile S,G,T & M compliant, NDAA 889 UL, CE, EN, FCC & RoHS compliant and with all accessories and as per detailed tender specifications. 188 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). 189 Supply and Clamping of CAT 6 armoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant.Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylenev. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 190 Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point( Point to Point ) Crimping, Testing and arrangement charges. 191 Supply and fixing of POE 24 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. 192 Supply and Fixing of Rack with Accessories -Higher end 12 U Rack with LNS unit and fan extra for the above rack. 193 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 194 PA SYSTEMS 195 Supply,installation, testing and commissioning of 30W High efficiency ABS horn loudspeaker with weather protectin IP 65Max Power : 45 W, Rated power, 30 Watts, Power tapping, 30/15/7.5W-Effective frequency range (-10 db) (-380 Hz to 5 kHz) - SPL at rated power (1 khz) 126 dB- Self extinguishing acc. to UL 94 VO - IP 65 acc. to IEC 60529, safety acc. to EN 60065. (Make - BOSCH) 196 Supply, installaion, testing and commissioning of 240W mixer amplifier with following features : inbuilt bluetooth for audio streaming, sports audio playback from USB pen drive, 4 microphone/line inputs, plus music source input, insert features to use as a pre/power amplifier, Optional 2 tone chime generation for input 1 technical specifications - Frequency response 80 Hz to 18 kHx (+1/-3 dB W - 10 dB ref. rated output) - Distortion <1% @ rated output power, 1 kHz bass control Max +/- 8 dB Treble control max +/- 8 dB. (Make - BOSCH) 197 Supply, installation, testing and commissioning of Goose Mic 198 Supply and installation ofHandheld microphone with a dynamic transducer element that shall be designed for high speech intelligivility. It should have a rugged enclosure is both stylish and easy to use in a wide range of public and sound reinforcement applications. Polar Pattern unidirectional, frequency range 80 hZ to 12 kHz, Sensitivity 1.7mV/Pa +/- dB, Rate out impedance 600 Ohms. (Make BOSCH) (Market rate) 199 Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers. 200 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up 201 Supply and erection, testing and commissioning of 2.0 TR (6000K.cal/hr) ABS Split type Air conditioner (3 star rating)confirming to IS : 1391(part-2) 1992 with Admt No.1 fitted withhermetically sealed air compressor operating on refrigerant R-410A suitable for wall mounting for operation on 230V 50 HZsingle phase AC supply inverter technology with capable of thefollowing performinga) Coolingb) Dehumidifyingc) Air circulatingd) Filteringe) Refrigerant pipe lines – 6 mtr lengthThe installation works for the above split type AC units includethe following1. Mounting / fitting indoor and outdoor units at theirrespective locations2. Laying refrigerant pipe line of required length notexceeding 6 meters distance & connecting both units afterdrilling hole/holes in the wall is required, thickness of the coppertubing shall not be less than 0.7 mm3. Installing the section pipe with expanded polythene foamtubing4. Laying drain pipe to throw out the condensate water beingformed within indoor unit5. Leak testing the entire system unit6. Charging refrigerant gas in the unit7. Suitable electrical wiring with to be provided with 2.5sq.mm PVC insulated copper wire between indoor and outdoorunit upto 6 meter length and upto switch within 3 meters oflocation of indoor unit. (Like (Carrier / Voltas / Blue Star /Equivalent) as directed by the department officers 202 Supply and fixing of 5 KVA slim and wall mounting (V Guardmake ) double booster voltage stabilizer for operation on 170-230V 50Hz single phase AC supply capable for 2 TR split ACwith necessary inter connection and earth connection as directedby the departmental officers. 203 LANDSCAPE 204 Supplying of plastic Potted plants Anthurium size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 205 Supplying of plastic Potted plants Bogainvillea size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 206 Supplying of plastic Potted plants Ficus ponda size of dia 12 inch including loading and unloading charges, transportation, etc as directed by the site in-charge 207 Providing & laying spreading & Compacting graded stone aggeragate of size 45mm to 22.4mm, 22.4mm to 2.36mm & 2.36mm to 75 microns to Wet Mix Macadam (WMM) specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in Sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, rate including the cost & conveyence of all materials, labour charges for spreading, watering, rammed & consolidation and other tools & plants employed for the work etc., all complete and as directed by the departmental officers as per MORTH specification 406 IV Revision 208 Supplying and filling with M-Sand well watered rammed, and consolidated complying with relevant standard specifications etc., complete and as directed by the departmental officers. 209 ProvidingandlayingofBlackGraniteCobbleStoneflooringof approvedmake,inallcoloursandshades,laidon20mmthick cementmortar1:4(1cement:4coarsesand),jointingwithgrey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 210 SupplyingandlayingGrassPaverblock M40grade Providingand layingof 63mm thickhighstrengthtypeconformingIS15658- 2006ofrubberizedinterlockingpaverlockinsizeofminimum compressivestrengthof40N/mm2inuniformshapeofapproved maketobelaidinflurringbonepatternwithsandcushionbelow theuniformshapofapproved nonskittingsurfaceinthetopand therateincludinglevellingthebasepreparationof paversassub base,sandcushion150mmthicklaying outofpavementcutthe piecestofixtheedgevibringthepavers,sweepingtranporting loadingunloadingoflayingpaverblockasperstandard specification,.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Tamil Nadu View Result →
14.
Educational and Research Institute #10212966 Price Bid
Lecture Capture Studio , 4K Ptz Camera • Sensor - 1.0 Inch-Type Cmos • 15X Optical Zoom, 20X Digital Zoom • Effective Pixels Approx. 8.29 Megapixels (3840 X 2160) • Lens - F=8.3 – 124.5 Mm, F/2.8 – 4.5, 15X Optical Zoom, 9-Bladed Iris Diaphragm • Focal Length F=8.3 – 124.5 Mm, F/2.8 – 4.5, 35Mm Equivalent Focal Length: Approx. 25.5 (W) – 382.5 Mm (T) • Angle Of View Horizontal: 73.0 (W) – 5.7° (T) Vertical: 45.2° (W) – 3.2° (T) • Min. Illumination - 1.5 Lux At Uhd • Shutter Speed 1/3 – 1/2000 Sec • Gain = -6.0 Db~ 33.0 Db • Nd Filter - Built-In (Off, 1/4, 1/16, 1/64), Motor Operated • Focus - Focus Mode: Manual, Af-Boosted Mf, Continuous Af, Face Af, Tracking Af Type: Dual Pixel Cmos Af, Contrast Af • Gamma - Normal1 (Standard), Normal2 (X4.0), Normal3 (Bt.709), Normal4 (X5.0), Wide Dr, Oem Log 3 • Pan And Tilt - Pan Operation Range: Horizontal ±170° Pan Operation Speed: 0.1° – 100°/Sec. Tilt Operation Range: Vertical -30° – +90° Tilt Operation Speed: 0.1° – 100°/Sec. • Protocol -Xc, Rtsp/Rtp, Ndi|Hx, Rtmp/Rtmps, Standard Communication (Serial), Standard Communication (Ip), Srt, Freed • Video Output Format: Sdi - 1920 X 1080: 59.94P/59.94I, 50.00P/50.00I/25.00P, 29.97P/23.98P (4:2:2 10 Bit)1280 X 720: 59.94P, 50.00P (4:2:2 10 Bit) • Video Output Format: Hdmi 3840 X 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 Bit) 1920 X 1080: 59.94P/59.94I, 50.00P/50.00I/25.00P, 29.97P/23.98P (4:2:2 10 Bit) 1280 X 720: 59.94P, 50.00P (4:2:2 10 Bit) • Video Output Format: Ip 3840 X 2160: 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 1920 X 1080: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 1280 X 720: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 640 X 360: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) • Gen-Lock Terminal - Bnc Jack X 1, 1.0 Vp-P/75 O, Input Only • Audio Input- 2X Xlr/Audio Input (3-Pin Jack)Balanced Sensitivity (Mic): -60 Dbu Sensitivity (Line): +4 Dbu , 4K Ptz Camera • Sensor – ½.5”Inch-Type Cmos Sensor Or Better • 20X Optical Zoom, 20X Digital Zoom • Effective Pixels Approx. 8.29 Megapixels (3840 X 2160) • Lens - F=3.67 – 73.4 Mm, F/1.8 – 2.8, F/2.8 – 4.5, 15X Optical Zoom, 9-Bladed Iris Diaphragm • F=3.67 – 73.4 Mm, F/1.8 – 2.8, 20X Optical Zoom, 8-Bladed Circular Aperture 35Mm Equivalent Focal Length: [4K Uhd] Approx. 29.3 (W) – 601 Mm (T) [Full Hd] Approx. 30.5 (W) – 627 Mm • Focus - Focus Mode: Manual, Af-Boosted Mf, Continuous Af, Face Af, Tracking Af Type: Dual Pixel Cmos Af, Contrast Af • Gamma - Normal1 (Standard), Normal2 (X4.0), Normal3 (Bt.709), Normal4 (X5.0), Wide Dr, Oem Log 3 • Pan And Tilt - Pan Operation Range: Horizontal ±170° Pan Operation Speed: 0.1° – 100°/Sec. Tilt Operation Range: Vertical -30° – +90° Tilt Operation Speed: 0.1° – 100°/Sec. • Protocol -Xc, Rtsp/Rtp, Ndi|Hx, Rtmp/Rtmps, Standard Communication (Serial), Standard Communication (Ip), Srt, • Video Output Format: Sdi - 1920 X 1080: 59.94P/59.94I, 50.00P/50.00I/25.00P, 29.97P/23.98P (4:2:2 10 Bit)1280 X 720: 59.94P, 50.00P (4:2:2 10 Bit) • Video Output Format: Hdmi 3840 X 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 Bit) 1920 X 1080: 59.94P/59.94I, 50.00P/50.00I/25.00P, 29.97P/23.98P (4:2:2 10 Bit) 1280 X 720: 59.94P, 50.00P (4:2:2 10 Bit) • Video Output Format: Ip 3840 X 2160: 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 1920 X 1080: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 1280 X 720: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) 640 X 360: 59.94 Fps, 29.97 Fps, 14.99 Fps, 5.00 Fps (4:2:0 8 Bit) • Gen-Lock Terminal - Bnc Jack X 1, 1.0 Vp-P/75 O, Input Only • Audio Input- 2X Xlr/Audio Input (3-Pin Jack)Balanced Sensitivity (Mic): -60 Dbu Sensitivity (Line): +4 Dbu , Ptz Camera Control Number Of Camera Groups - 10 Groups With Up To 10 Cameras Per Group • Maximum Number Of Connected Cameras – 100 • Ptz Camera Remote Controller Compatible With Above Camera And From Same Oem • Appoint Up To 100 Pre-Set Angles Per Camera Using The 17.78Cm Touchscreen • A Multi-Function Joystick Allows Precise Adjustment Over Camera Movements And Settings While A Control Grip On Top Of The Stick Allows Zoom, Focus And Iris Control. • Display Lcd 7 Touch Screen Displays Menus & Key Camera , Camera Support System • Type: Professional Tripod System (With Fluid Head) • Maximum Load Capacity: 7 Kg (15.4 Lbs) • Height Range: Minimum Height: 70 Cm (27.6 Inches) Or Lower Maximum Height: 160 Cm (62.99 Inches) Or Higher • Leg Sections: 3 Sections Per Leg • Leg Lock Type: Twist-Lock System • Material: Aluminum Alloy (Tripod Legs), • Head Type: Fluid Head • Tilt Range: +90° To -75° Or Better • Pan Range: 360° Pan • Counterbalance System: Yes (With Adjustable Counterbalance) • Pan & Tilt Drag: Adjustable For Smooth Movements • Mounting Plate: 75Mm Ball Base For Easy Leveling And Support • Quick Release Plate: Yes (Compatible With Quick-Release Systems) • Leg Tip Type: Rubber Or Spiked Feet, Adjustable • Leveling System: Built-In Bubble Level For Accurate Leveling Additional Features: • High Stability For Professional Video Shooting • Smooth Fluid Head For Stable Panning And Tilting • Lightweight And Portable For Field Use • Durable, Ideal For Both Indoor And Outdoor Shooting Environments , Dolly For Tripod • Type: Professional Camera Dolly System • Compatibility: Compatible With Most Tripods, Especially With The Above Tripod • Maximum Load Capacity: 30 Kg Or Higher • Dolly Base Dimensions: 65 Cm X 82 Cm (25.6 X 32.3) • Leg Length Adjustment: Adjustable Leg Lengths To Suit Different Tripod Heights • Wheel Type: Durable Rubber Wheels (With Ball Bearings) • Wheel Locking System: Yes (Individual Wheel Locks For Stability) • Wheel Size: Large Wheels For Smooth Movement Over Different Surfaces • Wheel Rotation: 360° Rotation For Flexible Movement , Video Production Switcher Hand Carry Switcher- 6-Ch Hd Portable Video Streaming Studio (1080I/720P) Hand-Carry Portable Production Unit, Designed As A Suitcase Providing; 6-Ch Hd Input Digital Video Switcher W/ Xpt Assignment, Ftb, Mix, Cut, Wipe Effects,Pip & 2X Dsk, Tally/Gpi Output, With A Built-In 17.3” Fhd Monitor And A H.264 Streaming Encoder And Recorder For Simultaneously Live Streaming & Recording. 6 Video Input: 4X Hd-Sdi + 2X Hdmi5 Video Output: 2 X Sdi (Aux/Pvw/Pgm/Pgm Clean), 3X Hdmi (Pgm) , File Based Full Hd Video Recorder / Player Professionalssd 3G Video Recorder With 2 X 2.5 Ssd Slot / 2 X Sdxc Card Slot / 1 X 3G Sdi Input With Loop Output / 2 X 3G Sdi Output / 1 X Hdmi Input / 1 X Hdmi Output / Ethernet 10G Port For Deck Control And Fast File Transfer / 1 X Usb Type-C 3.0 (Up To 5Gb/S) For External Drive Recording, Webcam Out, Software Configuration Andupdates. To Be Quoted With Compatible2 X 1Tb Ssd Drives And Compatible Reader. , Wireless Lapel Microphone –Dual Transmitter Single Receiver Transmitter Wireless Mode Operating Frequency 2.400-2.4835 Ghz Bluetooth Protocol Br/Edr Bluetooth Operating Frequency 2.400-2.4835 Ghz Battery Capacity 360 Mah Battery Energy 1.39 Wh Battery Voltage 3.87 V Operating Time 6 Hours Receiver Dimensions 54.20×28.36×22.49 Mm (L×W×H) Operating Frequency 2.400-2.4835 Ghz Battery Type Li-Ion Battery Capacity 360 Mah Battery Energy 1.39 Wh Battery Voltage 3.87 V Charging Specification Max 5 V Charging Time 70 Mins Operating Time 6 Hours Transmitting Distance: 100 Meters , Wireless Handheld Microphone • Digital Transmission: Operating In The Uhf Spectrum, Enhancing Range, Reliability, And Scalability. • Smart Assist App: Connects Via Bluetooth Low Energy For Streamlined Setup And Operation. • Auto Scan: Creates Reliable Connections With Minimal Time And Effort. • Audio Input Dynamic Range: 134 Db, Eliminating The Need For Sensitivity Adjustments. • Equidistant Tuning Grid: Channels Can Be Placed 600 Khz Apart, Simplifying Frequency Coordination. • Tuning Bandwidth: 56 Mhz, Enabling Up To 90 Channels. • Selectable Frequencies: 2,240 Allow For Fine Tuning. • Battery Life: Up To 12 Hours With A Lithium-Ion Battery Pack, Or Up To 8 Hours With 2X Aa Batteries. • Audio Frequency Response: 20 Hz - 20 Khz (-3 Db) @ 3 Dbfs, 50 To 18,000 Hz • Frequency Response: 50 To 18,000 Hz • Polar Pattern: Cardioid. • Transducer Principle: Dynamic. • Max. Sound Pressure Level: 130 Db. • Dynamic Range: >134 Db. • Equivalent Noise Level: 32 Db. • Audio Output Level: 18 Dbu Max • Connectors: 3.5Mm, 6.35Mm (1/4-Inch) Output, Xlr Out , Pen Tablet Display 24 (+ Or – 1”)Uhd Resolution 3840X2160@60Hz Pro Pen 2, 10 Point Multi Touch, Battery Free Stylus Pro Pen 3, 8 Express Keys, 12 Ms Response Time, Brightness 300 Cd/M2 , Computer System For Interactive Display • Processor – Latest Generation I5 Processor Or Better • Ram- Min 16 Gb Or Better • Storage – 500Gb Ssd Or Better • Graphics Card – 2Gb Min. Or Better • Display – 19.5” Or Higher • Peripherals – Keyboard And Mouse • Os – Windows Os , 100W Led Panel Light • 100W Led Soft Panel Light • 5600K Colour Temperature. Cri,Tlci And R9 Value Above 95. • Uniform Shadowless Output, No Heat From Light, No Uv Radiation, • Control Mode:- Manual And Dmx Control Mode Through 5Pin Xlr. • Extreme Soft Illumination With Diffuser. • 0 ~ 100% Linear Dimming. • Black Powder Coated Fabricated Housing With Normal Yoke But With Barndoor And Safety Chain. • Light Fixture Mounting Clamp Customized For Suspending On Fixed Bars On Stage Made Up Of Aluminium Or Ms Material Complete With Black Powder Coating Matt Black Finish. With Spud. , Ceremic Green Or White Board • 12X4 Feet Resin Coated Ceramic Green/ White Board For Class • Room With Chalk And Duster Holder. • The Board Should Be Suitable For Academic Purpose And 1 • Framed In Double Sided Curved Anodized And Chrome • Plated Abs Corners For Good Aesthetics And Longevity. • To Be Covered With Pelmut With Lighting , Motorized Chroma Screen • Motorized Screen For A Dimension Of 9 Ft W X 9 Ft H • Having Easy Remote-Control Option To Move The Screen, • Uniform Noiseless Movement With Required Mounting Arrangement With No Frills Or Folds During Continuous Operation , 75-Inch Professional Display. Display Panel: • Screen Size: 189.3 Cm Diagonal • Aspect Ratio: 16:9 • Resolution: 3840 X 2160 (Uhd) • Panel Technology: Ips With Direct Led Backlighting • Brightness: 500 Cd/M² • Viewing Angle: 178° Horizontal And Vertical • Operation Hours: 24/7 Connectivity: • Hdmi Inputs: 4 Hdmi Ports • Usb Inputs: 4 Usb Ports (2 Usb 2.0, 1 Usb 2.0 Internal, 1 Type-C) • Displayport Input: 1 Dp 1.2A • Displayport Output: 1 Dp 1.2A • Rf Input: 1 Side • Av Input: 1 Mini Av Side • Rj-45 (Ethernet): 1 Side • Spdif Out: Yes Supported Formats: • Picture Formats: Bmp, Png, Gif, Heif • Video Formats: Mpeg1/2/4, Xvid, H.263/264/265, Wmv, Vc1, Vp9, Rm, Avs, Sorenson, Motion Jpeg, Av1 • Audio Formats: Pcm, Amr, Lpcm, Ra, Mpeg1/2/4, Aac, Wma, Ac4, Eac3, Ms11, Ms12, Flac, Vorbis, Dolby Truehd, Dts Audio: • Output Power: 10W + 10W • Features: Dolby Audio Main Features: • Hotel Mode: Yes, Basic • Cec: Yes, Basic • Sound Out (Arc): Yes • Hdr Support: Hdr10, Hlg • Bluetooth: Yes • Wi-Fi: 802.11A/B/G/N/Ac, 2.4Ghz/5Ghz, Built-In System On Chip (Soc) Specifications: • Cpu: Cortex-A55 X4, 1.3Ghz • Gpu: Mali G31 Mp2, Open Gl Es3.2 • Operating System: Android Tv R - 11.0 • Memory: 16Gb Emmc Storage, 2Gb Ddr3 Ram , 21 Broadcast Display Display Panel: • Screen Size: 21.5 Inches • Resolution: 1920 X 1080 (Full Hd) • Aspect Ratio: 16:9 • Brightness: 250 Cd/M² • Contrast Ratio: 1000:1 • Color Depth: 8-Bit (16.7 Million Colors) • Viewing Angle: 178° Horizontal And Vertical • Response Time: 7 Ms Connectivity: • Video Inputs: O 2 X 3G-Sdi Bnc O 1 X Hdmi 1.3 (Optional) • Video Output: O 1 X 3G-Sdi Bnc • Audio: O 16-Channel Audio Meters (Up To 8 Channels Displayed Simultaneously) O 2 X 8O/2W Speakers (Rear-Mounted) O 3.5Mm Headphone Jack O Sdi Embedded Audio Support Supported Video Formats: • Hdmi: O 480P/60, 480I/60, 576I/50, 576P/50 O 720P/50/60 O 1080I/50/60 O 1080P/24/25/30/50/60 • 3G-Sdi: O 1080P (50/60) • Hd-Sdi: O 1080I (60/59.94/50) O 1080P (30/29.97/25/24/24Sf/23.98/23.98Sf) O 720P (60/59.94/50/30/29/25/24/23.98) • Sd-Sdi: O 480/59.94I, 576/50I Additional Features: • 3D Lut Loading For Color Calibration • False Color For Exposure Analysis • Zebra Pattern For Highlight Indication • Waveform And Vector Scope For Signal Analysis • Audio Level Meters • Safety Markers And Aspect Ratio Markers • Gpi Control • User-Defined Shortcut Keys , Audio Mixer 10-Channel Analog Mixer With Built-In Usb Audio Interface And Spx Digital Effects, Inputs: • 4 X Mic/Line (Xlr/Trs Combo) • 3 X Stereo Line (1/4 Trs, Rca) Outputs: • 2 X Main Out (Xlr, Balanced) • 2 X Monitor Out (1/4 Trs, Balanced) • 1 X Headphone Out (1/4 Trs) • 1 X Fx Send (1/4) Usb Audio Interface: • 2-In/2-Out (24-Bit/192Khz) • Compatible With Mac, Windows, Ios (With Adapter) Input & Processing: • Preamps: Class-A Mic Preamps • Phantom Power: +48V (For Condenser Mics) • Eq: 3-Band Eq (High, Mid, Low) On Mic/Line Inputs • Compression: 1-Knob Compressor On Channels 1-2 • High-Pass Filter: 80Hz On Mic Inputs Usb Interface For Daw Recording And Streaming , Speakers 2-Way, Bass-Reflex Surface-Mount Speaker Speaker Type:2-Way, Bass-Reflex Components: • Low-Frequency Driver: 8 Cone • High-Frequency Driver: 1 Soft Dome Tweeter Frequency Response: • -10 Db: 51 Hz – 20 Khz Coverage Angle: • Horizontal: 100° • Vertical: 100° Power Handling: • Noise: 90W • Program: 180W • Maximum: 360W Sensitivity: • 91 Db Spl (1W, 1M) Maximum Spl: • 117 Db Spl (Calculated, 1M) Impedance: • 8O Transformer Taps (For 70V And 100V Systems): • 100V: 60W (170O), 30W (330O), 15W (670O) • 70V: 60W (83O), 30W (170O), 15W (330O), 7.5W (670O) Crossover Frequency: • 2.8 Khz , Amplifier 2-Channel Power Amplifier Designed For Professional Audio Applications, Offering High Output Power And Advanced Processing Capabilities. Below Are Its General Specifications: Amplifier Type: • Class-D Amplifier With Custom Lsi Chip Power Output: • Stereo Mode: O 8O: 300W Per Channel O 4O: 500W Per Channel O 2O: 300W Per Channel • Bridged Mode: O 8O: 600W O 4O: 1000W Frequency Response: • ±1.0 Db (1W, 8O, 20Hz To 20Khz) Total Harmonic Distortion (Thd): • 0.1% At 1Khz, 10W • 0.3% At 1Khz, Half Power Signal-To-Noise Ratio (Snr): • 101 Db (A-Weighted, 8O, Gain Setting = +14Dbu) Crosstalk: • Less Than -60 Db (Half Power, 8O, 1Khz, Volume Max Input 150O Shunt) Inputs: • 2 X Xlr • 2 X 1/4 Trs Outputs: • 2 X Speak On Nl4 • 2 X Binding Post • 2 X 1/4 Ts Cooling System: • Dual 16-Step Variable Speed Fans With Front-To-Rear Airflow Digital Signal Processing (Dsp): • Onboard Eq, Limiting, Delay, Crossovers (Saved Via Usb Type A Port) , Hdmi Splitter • Video Input/Output - Input: 1 X Hdmi, Output: 4 X Hdmi • Video Format Hdmi Supported Resolutions 4096X2160p60/59.94/50 4096X2160p30/29.97/25/24/23.98 3840X2160p60/59.94/50 3840X2160p30/29.97/25/24/23.98 1080P60/59.94/50, 1080P30/29.97/25/24/23.98 1080I60/59.94/50, , 720P60/59.94/50 480P, 576P, 480I, 576I Pc Supported Resolutions 640X480@60Hz, 800X600@60Hz, 1024X768@60Hz, 1280X720@60Hz, , 1280X768@60Hz, 1280X960@60Hz, 1280X1024@60Hz, 1360X768@ 60Hz, 1366X768@60Hz, 1400X1050@60Hz, 1680X1200@60Hz, 1920X1080@60Hz, 1920X1200@60Hz Video Processing Hdr 4K2k@60 4:2:0 10Bits 4K2k 60Hz Ycbcr4:4:4 8Bit/Ycbcr4:2:0 10Bit 4K2k 30Hz Ycbcr4:4:4 8Bit Video Bandwidth - Single-Link 600Mhz (18Gbps) Audio Format -Dts-Hd Master Audio, Dolby Truehd, Dolby Digital, Dts, Dvd-Audio, Lpcm, Sacd, Mpcm , Up/Down/Cross Converetr • Type - Up/Down/Cross Conversion • Input -Vga X 1, Hdmi X 1 , Hd/Sd-Sdi X 1 Or Better • Output - Sdi X 2, Hdmi X 1, Sdi Loop Thru Bnc Or Better • Supported Video Output Formats:1080P60/59.94/50, 1080P30/29.97/25/24/23.98, 1080I60/59.94/50, 720P60/59.94/50, 525I, 625I • Audio Format (Input):Analog Audio L/R: Stereo Audio • Sdi / Hdmi Embedded Audio • Audio Format (Output):Sdi Embedded Audio Up To 8Ch, 48Khz, Pcm Audio • Hdmi Embedded Audio Up To 8Ch, 48Khz, Pcm Audio , Bidirectional Sdi – Hdmi Converter • Sdi Video Inputs -1 X Sd, Hd Or 3G-Sdi. • Sdi Video Outputs - Automatically Matches The Hdmi Video Input. • Hdmi Video Inputs - Hdmi Type A In. • Hdmi Outputs - Hdmi Type A Out. • Multi Rate Support - Auto Detection Of Sd Or Hd • Psu , Usb Capture Device • Input Interface - One Sd/Hd/3G Sdi Input + Embedded Audio • Support Input Resolution Up To 2048×1080 Pixels • Host Interface - Usb 3.0, Compatible With Usb 2.0 • Os Support - Windows, Linux, Mac, Chrome Os • Capture Format - Support Capture Resolutions Up To 2048X1080 • Support Capture Frame Rates Up To 120Fps • Support 2-Channel Audio Streams • Capture Sdi Signals Transmitted A Long Distance Away: Up To 150M For 3G-Sdi Signals • Included Software - Usb Capture Utility, Capture Express, Etc. • Compatible Software Zoom Rooms, Microsoft Teams Rooms, Skype For Business, Google Hangouts, Gotomeeting, Vlc, Obs Studio, Xsplit, Etc. • Auto Detection Of Input Signal Format • Windows, Linux And Mac Sdk • Continuously Work For 24Hx7 • Led Status Indicator , Professional Headphone • Type: Over-Ear, Closed-Back Headphones • Frequency Response: 8 Hz - 25,000 Hz • Impedance: 64 Ohms • Sensitivity: 113 Db (At 1 Khz) • Max Spl (Sound Pressure Level): 113 Db • Driver Type: Dynamic, Neodymium • Total Harmonic Distortion (Thd): <0.1% (At 1 Khz, 100 Db Spl) • Cable Length: 3 Meters (Detachable Coiled Cable) • Connector: 3.5 Mm Stereo Jack With 1/4 (6.3Mm) Adapter , Installation Materialincluding Branded Video Cables, Audio Cables, Convertor, Connectors, Rack And Otherinstallation Materials. , Installation And Integration Charges. Preferred Concealed Cabling ,The Installation Should Be Executed By Professionals And Verified By Oems Authorized Personnel , Workstation - I9 13900/32Gb/512Ssd/4Tb Hdd/T400-4Gb/Win11 Pro With 27 S2722qc - 4K Monitor , Warranty: Minimum Three Years For Equipment And Installation Services
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Tamil Nadu View Result →
15.
Housing Urban and Rular Development #10191469 AOC
Furnishing Work Of Classrooms, Library And Laboratory, Equipments And Miscellaneous Work For The New University Campus Of Binod Bihari Mahato Koyalanchal University, Dhanbad- 1 Supplying Metal Exhaust Fan 300 mm Sweep-Supplying, erecting and testing of approved make 300 mm sweep Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including frame bolt/ Anchor hole fastners etc, complete finished of a as required. 2 Wall Demolition- Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 3 Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 4 Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5 Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 6 Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 7 Door Frame- Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile C - Fixing with adjustable lugs with split end tail to each jamb 8 Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. 9 Extra for providing and placing in position 2 Nos 6mm dia. M.S. barsat every third course of half brick masonry. 10 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 12 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. 13 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.-Granite stone slab colour black, Cherry/Ruby red-Area of slab over 0.50 sqm 14 Sink- Supplying fitting and fixing white glazed fires clay sink of approved make with overflow arrangements supported on C.I. Or R.S. Painted bracket 40mm. Dia C.P. Brass waste with C.P. Brass chain and rubber plug 40mm dia P.V.C. Waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams including cutting wall and making good the same etc. all complete as per specification and direction of E/I. Size-600 mm x 450 mm x 250 mm ) 15 FULL HEIGHT WOODEN PARTITION WITH PARTLY GLAZING- Providing and fixing partitions made of 50 mm x 50 mm pine wood / 2nd class teak wood @ 600 mm c/c both ways with the help of Fasteners/Screws etc. to achieve desired strength. Providing & fixing Comm. grade 12 mm thick commercial Pty board on the frame on both the faces i/c exposed side edges of Frame & 1.0mm thk Laminate on both outer faces and exposed side edges of ply as per the directions. Partition shall also be provided with 8 mm thick clear float glass of approved size with Polished Edges of approved brands in Wooden Partition Openings as required, fixed from all four sides from both ways inside partition openings with 10mm.tk. T.W. beadings/12 mm thick MDF Board Lipping/D-Buttons of design as per approval and direction at site. Etching / Etching Film (50 Microns) is to be provided as per approved pattern on 8 mm thick clear float glass. All wooden exposed surfaces shall be melamine polished in approved shade and texture finished as per the directions and satisfaction of Engineer In charge, compelete.This work will 16 Frosted glass sheet of nominal thickness 4 mm- Providing and pasting frosted film on glass work including all materials tools, plants and labour complete as per the directions of the Engineer-in-charge. 17 Supply & laying of PVC insulated and sheathed 1.1 kv grade twin twisted 1.5 sqmm cu flexible wire for speaker. 18 Providing & installation 1.5 Tr. 5 Star split A.C (Inverter Type) I91391-part-1 19 Copper refregerant pipe-Providing & installation Copper Tube of size 5/8 for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation 20 Providing & installation 5 KVA wall mounted automatic voltage stablizer from range 140 V to 280V 21 Providing & installation Drain Pipe for AC 22 Non Schedule 23 * PROVIDING AND SUPPLYING MODERN DESIGN RECEPTION DESK IN ENGINEERED WOOD MAKE THE PRODUCTS UTILE AND A DELIGHT.TIMELESS DESIGN THAT ELEVATES YOUR OFFICE SPACE STRUCTURE OF SPACIOUS RECEPTION DESK,TABLETOP OFFERS YOU A GENEROUS LOOK FOR WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 1800 MM(L)X 600 MM(D)X 750 MM(H) WHICH GIVE MORE SURFACE AREA FOR WORK ,TABLE TOP MADE OF25MM THICK ALSO TABLE TOP BASED ON SIDE PANELS MADE 18MM THICK PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST. * COMBINATION CONSTRUCTION OF RECEPTION DESK ABOVE TABLE TOP 18 MM THICK COUNTER TOP TO TABLE TOP HEIGHT IS @ 300MM ,OVERALL RECEPTION DESK HEIGHT IS @ 1050MM WITH COUNTER TOP,TABLE TOP MADE 25 MM THICK PRELAM PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK PVC EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED WITH HOT MELT GLUE.ALONG WITH 18MM THK ADDITIONAL MODESTY PANEL SIZE IS 1350 MM (L) X 700 MM (H) MADE BY EXCLUSIVE FROSTY WHITE COLOUR WITH EPIC DESIGN & LOOK.1 MOBILEPEDESTAL (2 DRAWERS + 1 FILING CABINET )SIZE IS 450 MM(L)X 450 MM(D)X 725 MM(H) IN PROVIDED WITH CENTRAL LOCKS FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING & PEDESTALS MOVE ON NYLON CASTORS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST 24 PROVIDING AND SUPPLYING * MEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 580MM(L)X 670MM(D)X1110MM(H) ,*THE CHAIR MADE OF FULL UPHOLSTERY IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : AMREST IS HAVING TWO ADJUSTMENT HEIGHTS (UP & DOWN) .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM. SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 480MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1110MM & MINIMUM HEIGHT IS1010MM* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS . 25 PROVIDING AND SUPPLYING 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION,THREE SEATERTYPE WAITING AREA CHAIR - MATERIAL : STAINLESS STEEL SIZE 1820MM(L)X 690MM(D)X 790MM(H) COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 26 Supplying of Portrait/Landscape Not applicable Fabric Pin Up Notice Boards(Fabric Pin Up Notice Boards 3 X 6 FT GREEN),Specification-Width of Board in mm:900 mm,Colour(Front/ Display layer):Green,Height of Board in mm:1800mm,Rear panel material of Board:Laminated sheet,Overall pinability depth ofBoard in mm:9 millimeter,Core material thickness inmm:9 millimeter 27 PROVIDING AND SUPPLYING COLLEGE DESK TOMKINS MATERIAL : PRELAMINATED PARTICLE BOARD WITH M.S BASE UNIT SIZE : 590 MM(L) X 1090 MM(D) X 830 MM(H) PER SEAT SIZE- 590 MM X 375 MM X 450 MM/ONE SEATER DESK SIZE :1090 MM(L) X830 MM(H) COLOUR : AVAILABLE ON REQUEST/FINISH : EPOXY POLYESTER ,* PROVIDING & SUPPLYING TWO SEATER COLLEGE DESK TOMKINS COMBINATION OF THREE ROWS FIRST , MIDDLE AND LAST SCRATCHPROOF EASY WIPE TOP / DURABLE ,STRONG & SAFE,UNDERSTRACTURE MADE OF MAIN FRAME MDE OF CRCA POWDER COATED IS GRAD:304 M.S BLACK POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) EPOXY POLYESTER COATING.* TABLE TOP & MODESTY PANNEL MADE IN 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS.CHAIR WITH GAS LIFT ,A). BACK FRAME: 1.2MM COLD ROLLED STEEL/B). BACK BOARD: 10MM PLYWOOD, NO CUSHION C). SEAT BOARD: 15MM PLYWOOD, NO CUSHION/D). TIP-UP SYSTEM: SPRING MECHANISM E). 2. LEG: COLD-ROLLED STEEL, FIXING ON THE FLOOR BY SCREWS, 80 X 35 X 1.5MM THICK OVAL TUBE, BLACK POWDER SPRAYING.* THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST 28 Supplying of Material & Subtype Engineered Wood Table Top Material Engineered Wood Finish Matte Colour & Colour Family Brown - Classic Walnut Dimension (W)550mm X (D)550mm X (H)1200mm Size Compact Assembly Type Knock Down (Obelisk), 29 Suppling of Writing Board ( 4x10 Non-Magnetic) of material Top Surface materials (Used for white boardsurface)-Porcelain,Top surface material thickness -0.7 mm to 0.8 mm,Frame material -Anodized extruded aluminum alloy hollow section conforming to IS 733 (With latest amendment),Frame wall thickness-1.2 mm,Frame section front -20 mm,Frame section side -16 mm,Core material-MDF board grade-I conforming to IS 12406 (with latest amendment),Core material thickness -9 mm as per Department incharge 30 Supplying of 14 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 8850 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 8850 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST, * CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST, 31 Supplying of * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : MARVEL/HB/ECO ,* ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1380MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM . * ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) , SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1380MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 32 Supplying ofMEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1125MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM .* ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) ,SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1125MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 33 Supplying of Tte Mild Steel Pipe of diameter 19 mm and wall thickness 16gauge. Classroom Chairs, tte,Thickness-2mm to 45mm,Material-Mild Steel Weight-Depends upon the size,Outside Diameter-0.80 Inch to 36 Inch 34 Supplying of 1-Bay Sprocket Chain Drive Mechanism MobileStorage Compactors,Material-Mild Steel Product Type-1 Bay,Height -7 ft,Storage Capacity-50-80 kg Usage/Application office, Home, Hospital, Store Room, Warehouse 35 Supplying of -- Movable File StorageSystem (Compactor) 1-Bay Mechnized Drive Type(COMPACTOR 2 ( 04 BODY)) 36 Supplying of Methodex MS1-6MCMETHODEX(Methodex MS1-6MC),Accutec Mobile Storage System,Material SS,Usage/Application-Warehouse Height-8-10 Feet,No of Layers-5 37 Supplying of : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 38 Supplying of : PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 39 Supplying of* HIGH BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 590MM(L)X 505MM(D)X1280MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : KNEE TILT MECHANISM . * ONLY SEAT SIZE IS 505MM(L)X 505MM(D)X610MM(H) & THE BACK SIZE IS 590MM(L)X 710MM(H) SEAT MAXIMUM HEIGHT IS 610MM & MINIMUM HEIGHT IS 510MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1280MM & MINIMUM HEIGHT IS1180MM * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650 MM CHROME BASE WITH SMOOTH CASTORS . 40 Supplying of* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 570MM(L)X 500MM(D)X940MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED. * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 570MM(L)X 500MM(D)X475MM(H) SEAT HEIGHT IS @ 940MM & BACK HEIGHT IS @ 475MM . * FIXED CANTILEVER CHAIR . * BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 41 * SUPPLYING AND PLACING FIVE SEATER (3+1+1) EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 3 SEATER- 1905MM(L) X890MM(D)X 870MM(H)SOFA SIZE IS 1 SEATER -(W)960mm X (D)890mm X (H)870mm ,WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR, IT COMPLEMENTS THE MODISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. 42 Supplying of Material & Subtype Solid Wood - Beech Wood Table Top Material Clear Glass,Frame Material Solid Wood Leg Material Solid Wood,Finish Matte Colour & Colour Family Brown - Walnut,Dimension (W)1130mm X (D)630mm X (H)410mm,Number Of Recliners 1 Number Of Reclining Positions 3,Size Standard (HOPPER/CT), 43 Supplying of6 SEATER Rectangular MEETING TABLE DURIAN MODEL SMART/CON/6FT MADE OF PRELAMINATED PARTICLE BOARD WITHSLANTLEGS50X50 MM MS UNDERSTRUCTURE IN POWDER COATING 2TOP MADE OF25MMTHICK PRELAMINATED PARTICLE BOARD IN FROSTY WHITE COLOR WITH MAIN TABLE SIZE1800MM(L)X 1050MM(D)X 750MM(H) (SMART/CON/6FT/A), 44 SUPPLYING & PROVIDING CAFETERIA CHAIR SIZE IS 381MM(L)X 419MM(D)X839MM(H) A COMBINATION OF SYNTHETIC FIBER WITH STAINLESS STEEL MAKE THE PRODUCTS UTILE AND A DELIGHT, THE COMPLETE STRUCTURE SHALL BE MADE UP OF 20% GLASS FILLED BLOW MOLDED HIGH-DENSITY POLYETHYLENE ANDIS,THE FRAME STRUCTURE SHALL BE SUPPORTED BY ( 2 STRAIGHT + 2 SLANT ) FOUR LEGS.THE TUBULAR WELDED FRAME IS MADE FROM DIA2.22 +/- 0.03CMX 0.12+/- 0.0128 CM AND 3.5+/- 0.03 CM X 0.12+/- 0.0128 AM STAINLESS STEEL 202 GRADE TUBE & THE TUBE ARE BUFF POLISHED TO GIVE SHINY FINISH.SEAT AND IN BACK GIVEN HANDLE TO HOLDARE MADE OF INJECTION MOULDED HIGH IMPACT STRENGTH POLYPROPYLENE POLYMER COMPOUND WITH INDOOR GRADE UV RESISTANCE AND PRESSED FITTED WITH LEGS.THE CHAIR IS EASY TO STORE WHEN NOT IN USE, SINCE YOU CAN STACK UP TO 6 CHAIRS ON TOP OF EACH OTHER. (COCO/SUR). 45 SUPPLING OF METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1830MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET.HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, FITTED WITH MS BODY LOCK & HANDLE. WITH 2 NUMBERS OF GLASS DOOR SHUTTERS , THE GLASS USED SHALL BE 4MM THICK CLEAR. UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 30 KG MAXIMUM.EACHRACKSHALLBEPROVIDEDWITHSTIFFENERATBOTTOMFOR STRENGTH.THE ENTIREBODYPANELAND SHELF SHALLBEMADEOF HIGHYIELD STRENGTH,THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY 46 SUPPLING OF DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 750MM(D)X 750MM(H) 36MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITHWENGE FINISH, USING HOT MELT GLUE TO FIXING 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 25MM THICK.*PROVISION OF SIDE RUNNER OF SIZE IS 750MM(L)X 450MM(D)X 760MM(H) ,( CONSTRUCTION IS FROM RIGHT SIDE OF SIDE UNIT TOP BASED ON FIXED PEDESTAL WITH SS STUD OF GRADE 304, ON TABLE TOP PVC GROMENT HOLEFOR WIRE MANAGEMENT .*FIXED PEDESTAL OF SIZE450MM(L)X 450MM(D)X 650MM(H) PER DRAWER HEIGHT IS @ 136MM, FILLING DRAWER HEIGHT IS @ 300MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 47 SUPPLING OF* CANTILEVER CHAIR SKU : 70011/CN/A, * ALL OVER SIZE IS : 590MM(L)X 490MM(D)X980MM(H) , *THE CHAIR MADE OF FULL FABRIC INBLACK COLOUR . IT WILL COMES INFINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32(±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* BASE : M.S POWDER COATED TUBLAR FRAME OF CATILEVER TYPE . THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. 48 SUPPLING OF OFFICE DESKDESK STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL 18MADE OF MM THICK . *PROVISION OF SIDE UNIT OF SIZE IS 900MM(L)X 450MM(D)X 750MM(H) ,(COMBINATION CONSTRUCTION WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, LEFT SIDE TABLE TOP BASED ON A 18MM THICK SIDE PANNEL ENGINEERED WOOD & FROM RIGHT SIDE UNIT HAVE 2 SLIDING DOOR + 1 FIXED SHELVE . *SIDE UNIT SIZE900MM(L)X 450MM(D)X 750MM(H), IN PROVIDED WITH LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF SIDE UNIT IS 18MM THICK ALONG WITH FECIA OF SLIDDING SHUTTERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST . 49 SUPPLING OF * FIX CANTILEVER ,* ALL OVER SIZE IS : 595MM(L)X 510MM(D)X875MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM .* BASE : 4 LEGS METAL POWDER COATED* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 50 * PROVIDING AND SUPPLYING PENTA WORKSTATIONLSHAPE SINGLE SEATER UNIT NON SHARING IN COMPLETELY KNOCK DOWN CONDITIONS WITH AN OVERALL SIZE 1500MM(L)X 600MM(D)X 1200MM(H) THAT IS TO BE ASSEMBLED AT SITE. THE WORKTOPSHALLHAVETHESIZE1490MM-1490MM (L) x 592(D) MADEUPOF25MMTHICKPRE- LAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST . OF IS LEVEL WITH APPROVED LAMINATE AND FINISH AS PER APPROVED SHADE. * THE PROFILE OF THE TOP SHALL BE IN RECTANGLE SHAPE AND THE EDGES SHALL BE SEALEDWITH 2MM THICK THIN STRIP OF IMPERMEABLEPVCTHAT IS CUT TO FIT THE SIZE OF BOARD PANEL AND DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THE TOP TRIM, TOP BAR, MID BAR, VERTICAL BAR, RACEWAY, SKIRTING SHALL BE MADE UP OF ALUMINIUM EXTRUSIONS (PRE-TREATED)AND DULY POWDER COATED WITH POLYESTER POWDER COATING 40P-60PTHICK . THE TRIMS SHALL HAVE THE SIZE 67MM X 19MM WITH 1.5MMTHICKCOVERED WITH DIE CAST END CAPS ON JOINTS 2 WAYS,3 WAYS& 4 WAYS(L-COVERFORCORNER,T-COVERFORMIDDLESECTIONWHEREVER REQUIRED).THEALUMINIUMRACEWAYSHALLBESITUATEDBELOWTHEWORKTOPWITHAN OVERALLSIZE149MM(H)X60MM(D)WITH1.4MMCOVERTHICKNESSAND2MMBACK THICKNESS AS PER REQUIREMENT OF INLAYING THE ELECTRICAL MANAGEMENT AND CARRYING THE WIRE HORIZONTALLY. *THE EXPOSED VERTICAL AND HORIZONTALFACES OF THE FRAMES SHALL BE SNAPFITTEDWITHTRIMS.THERESHALLBESOFT-BOARD(WITHFABRIC)ANDMARKERBOARD PROVIDED AT FRONT OF THE USER. LAMINATED TOP TILE AND BOTTOM TILE SHALL BE SITUATED AT BOTH SIDES OF THE USER AND BELOW THE WORK TOP RESPECTIVELY. THE PARTITION SHALL HAVE CONCEALED WIRE MANAGEMENT CAPABILITIES AND SHOULD BE ENGAGED FOR RESPONSIVE AND SAFE OPERATIONSOF POWER,TELECOMMUNICATIONSANDDATA(LAN)AND HASSEPARATE COMPONENTS FOR ELECTRICAL, DATA AND TELEPHONE CABLES HAVING ADEQUATE CAPABILITY OF BOTH THE VERTICAL AND HORIZONTAL WIRE MOVEMENTS.SLOTS/CUT-OUTS SHOULD BE GIVEN ON RACEWAYSTOFIXALLELECTRICALANDDATAPOINTS.SINGLESIDEDPVCWIRE MANAGER SHOULDBE ENCLOSEDATTABLETOP.ADJUSTABLE LEVELLERSHOE SHALL BE PROVIDED AT BOTTOM OF THE PARTITION TO AVOID SCRATCHESON THE FLOOR.PARTICLE BOARD OF GRADE II OFISLEVEL. * THREE LAYER PRELAMINATED PARTICLES BOARD (WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST .* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 51 PROVIDING & SUPPLYINGFIXING OF TWO SEATER SCHOOL DESK WITH SHELF/STORAGE UNDER DESK WHICH ONE MADE BY CAST IRON,DESK TOP MADE BY 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST,TWO SEATER CLASSROOM DESK CUM BENCH, TOTAL SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) DESK SIZE : 1050MM (W) X 400MM (D) X 760MM (H) BENCH SIZE : 1050MM (W) X 310MM (D) X 390 / 760MM (H) BACK SIZE : 1050MM (W) X 150 MM (H),TABLE TOP SHALL BE POLYPROPYLENE CO POLYMER (PPCP).BANDING UNDER STRUCTURE-BLACK 9005 ERW PIPE (AS PER IS:7138) : 25X25X1.2MM SQUARE MS PIPE, OF THICKNESS 1.2MM IN BLACK EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) AT BASE WITH PLASTIC CAPS MADE OF PP COPOLYMER (3530 GRADE) ARE ALSO PROVIDED ON THE REAR FRAMES ADDING MORE AESTHETIC VALUE TO THE PRODUCT. * ADDITIONAL HORIZONTAL SUPPORTS OF M.S. C SECTIONS OF 1.5MM THICK ARE PROVIDED BELOW THE DESK & SEAT.SHELF: 0.8MM THICK POWDER COATED M.S. SHEET BELOW THE DESK & HOOKS ON EITHER SIDE OF DESK IN M.S. ROD OF DIA 6MM.TOP,SEAT AND BACK PANEL: 18MM THICK PRE LAMINATED BOARD WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST.* 52 Suplying of Laboratory Steel Furniture Sidebench with rack and table top of specification,Size of side benches/Island benches (LxWxH):1800 mm X 1800 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 53 Supplying of Laboratory Steel Furniture Island bench with table top Size of side benches/Island benches (LxWxH):900 mm X 1500 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 54 Supplying ofPowder coated Round Classroom Stools Load of 50 Kg of stool of specification:Height Adjustment: Without Hydraulic,Frame and support made of CHROME PLATED MS TUBES,Chair Type:Non Revolving,Type of seating:Only seat,Pedestal base :Aluminium Die Cast 55 Suppling of Over Head Storage delite hi-tech of specification Material of Construction:ISI Marked, three layer Prelaminated particle Board conforming to Grade II Type III of IS 12823/2013 laminated with 0.6-0.8 mm thick lamination conforming to IS 2046/1995 and balancing lamination of 0.5 mm thick on the back side,Number of Shelves (Nos):2 Number of Doors (Nos) -2 ,Height in mm (±10 mm)-750,Depth in mm (±5 mm)-450 56 Suppling ofStainless Steel Name Plates, Monograms, Labels, As per BHEL ,Specifications :Stainless Steel Name Plates, Monograms, Labels, 57 Suppling of Aquaguard RO & UV both SS304 Drinking Water Coolers With Built In Water Purifiction System AquaguardR 58 Suppling ofStainless Steel External Branding Signage Boards, Size 22X6 Feet,Signage Printing-Single size vinyl print ,Material -Stainless steel ,Coating: Gloss or matte,Fabrication Specs-framing with one coat of red oxide & 2 coats of oil paint to avoid rusting 59 PROVIDING & SUPPLYING DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2100MM(L)X 900MM(D)X 750MM(H) 50MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH CLASSIC WENGE BROWN FINISH 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 50MM THICK* PROVISION OF SIDE RUNNER OF SIZE IS 1200MM(L)X 400MM(D)X 760MM(H) ,(CCOMBINATION ONSTRUCTION BELOW TABLE TOP 1 KEY BOARD TRAY IN PVC WITH TELESCOPIC CHANNEL ON RIGHT SIDE IS MOVABLESIDE RUNNERHAVING 1 OPENABLE DOOR WITH 1 FIXED SHELVE, 1 OPEN BOX WITH 1 FIXED SHELVE UPPER SHELVE HEIGHT IS @ 320MM BELOW SHELVE HEIGHT IS @324@ + 3 DRAWERS (2 EQUAL DRAWERS + 1 FILLING DRAWER)PER DRAWER HEIGHT IS @ 184MM, FILLING DRAWER HEIGHT IS @ 303MM HAVE CENTRAL LOCKAND HANDLES WITH CASTORS .* MOBILE PEDESTAL OF SIZE400MM(L)X 530MM(D)X 671MM(H) ,PER DRAWER HEIGHT IS @ 186MM, FILLING DRAWER HEIGHT IS @ 195MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 60 PROVIDING & SUPPLYING* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 610MM(L)X 505MM(D)X990MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORTbackrest support* ONLY SEAT SIZE IS 610MM(L)X 505MM(D)X485MM(H) & THE BACK SIZE IS 610MM(L)X 540MM(H) ,* BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 61 PROVIDING & SUPPLYING OFFICE DESK STRUCTURE OF RECTANGULAR SHAPE .PRIMARY WORK SURFACE OVER ALL SIZE IS 1200MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF 25MM THICK PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL MADE OF 18MM THICK, WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP.*CONSTRUCTION RIGHT SIDE OF TABLE TOP IS BASED ON A FIXED PEDESTAL3 DRAWERS & FROM LEFT SIDE OF TABLE TOP IS BASED ON 18MM THK ENGINEERED WOOD PVC EDGE BANDING PEDESTAL BACK,TOP,BOTTOM & DRAWERS ARE MADE OF 18MM THICK WITH 1 CPU TROLLY MADE IN BLACK METAL POWDER COATED.*FIXED PEDESTAL:L:410MM(L)X 580MM(D)X 750MM(H) ,IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823. 62 Suppling of Material & Subtype Solid Wood - Beech Wood Table Top Material Solid Wood,Leg Material Solid Wood Finish Glossy Colour & Colour Family Brown - Walnut Dimension (W)680mm X (D)530mm X (H)450mm Table Top Thickness 8mm,Size Compact, 63 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 838MM(L)X 305MM(D)X 1676MM(H) STEEL BOOKCASE HAVING 4 DOORS AND K. TYPE OF LOCK: THREE WAYBOLTING DEVICE CONTROLLED BY LOCK, THICKNESS OF MS SHEET USED FOR SHUTTER: 0.7 MM, THICKNESS OF MS SHEET USED FOR SHELF: 0.7 MM, THICKNESS OF MS SHEET USED FOR TOP,BOTTOM, BACK AND SIDES: 0.7 MM, MATERIAL OF HANDLE: CAST BRASS, THICKNESS OF TRANSPARENT GLASS IN SHUTTERS: 4.0 MM, THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 60-80 MICRONIN COLOR GREY-LIGHT GREY. 64 Suppling of 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION DURIAN,THREE SEATERTYPE WAITING AREA CHAIR -NIXON/SS/3 MATERIAL : STAINLESS STEEL,SIZE 1820MM(L)X 690MM(D)X 790MM(H)COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 65 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE) 6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY. 66 PROVIDING & SUPPLYING * FIX CANTILEVER CHAIR PROVIDING & SUPPLYING* ALL OVER SIZE IS : 590MM(L)X 490MM(D)X940MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED.* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 35 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 590MM(L)X 490MM(D)X450MM(H) SEAT HEIGHT IS @ 450MM .* BASE : 2 CHROME LEGS + BACK SIDE BOTTOM CHROME IN METAL . 67 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM). 68 SUPPLYING AND PLACING30 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated ParticleBoards Of Grade-II Type-II Of IS:12823/Latest (for 14 seater rate devided by 30X24} 69 SUPPLYING AND PLACING PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OFSUPPLYING AND PLACING PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK .* PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 70 SUPPLYING AND PLACING* HIGH BACK 360° DEGRE REVOLVINGCHAIR * ALL OVER SIZE IS : 673MM(L)X 508MM(D)X1270MM(H) , *THE CHAIR MADE OF FULL NATURAL LEATHER IN BROWN COLOUR . IT WILL COMES IN MATTE FINSIH EXTRA PADDED DESIGNED FOR MORE CONFIRMT AT WORKPLACE IN CONTEMPORARY STYLE . DETAILS :* ARMS : WOODEN ARMS WITH LETHER PADDING ARM REST ARE FITTED TO THE SEAT & BACK.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT . * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK .BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : MULTI-LOCKING KNEE TILT MECHANISM .SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 500MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1270MM & MINIMUM HEIGHT IS 1219MM* GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : THE PRONG (BASE) IS MADE OF SOILD WOOD WITH POLISHEDAND FITTED WITH 5 NUMBERS. TWIN WHEEL CASTORS (CASTOR WHEEL DIA. 50MM) & 700MM PITCH CENTER DIA (740MM WITH CASTORS) . 71 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood Upholstery Material Leather,Seat Material Leather Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)1140mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 1 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 72 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood,Upholstery Material Leather,Seat Material Leather,Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)2130mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 3 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 73 SUPPLYING AND PLACING Rectangular CENTRE TABLE with Marble Top of 1219mmX711mm,(DAISY/CT (W)1300mm X (D)650mm X (H)450mm),Specifications:Number of storage under top No storage,Top material,Tempered glass,Frame material No frames,Dimension of Top (Length X Breadth, or Diameter) ±20mm,762mmX457mm,Height of centre table ±10mm,410,millimeter,Thickness of top material (+/-2 mm)- 8 millimeterThickness of frame material (+/- 1 mm)-10 millimeter 74 SUPPLYING AND PLACING 14 SEATER oval MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II 75 SUPPLYING AND PLACING 6 Seater Sofa Material & Subtype-Premium Leatherette,Frame Material Solid Wood,Upholstery Material Premium Leatherette,Filling Material Foam,Silicone Fiber,Seat Material Premium Leatherette-Leg Material Solid Wood,Finish Matte,Colour & Colour Family Brown -Coffee Brown Dimension (W)4865mm X (D)960mm X (H)820mm,Seating -Capacity 3 Seater,seating Height 475mm,Size Standard 76 SUPPLYING AND PLACING9 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 4650 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 4650 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST,* CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATESt. 77 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM) 78 SUPPLYING AND PLACING Wooden Acoustic Wall Cladding/Panelling- Providing and fixing in position wood wall paneling of width 128mm, thickness of 16mm and length 2440 mm made up of high density fiber board with minimum density of 800 Kg/m3 substrate with a laminated facing/wood veneer as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 2mm groove & 14mm pitch. The panels shall have fire resistance of Class 1, BS 476 part 7. The edges of the panels shall be tongued-and-grooved to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick glass wool layer as directed by the Engineer-in-Charge. The panel shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install Gel stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall horizontalty using screws and plugs at spacing of 600mm centre-to-centre, Screw the aluminium channel (keel) vertically on channeled G.I stud 600mm 79 SUPPLYING AND PLACINGBlackout roller blind,Specifications-Mounting arrangement profile systems – clicked on hidden mounting clipsTypes of roller blind,Blackout roller blind-Shading solutionSingle roller blind – utilise one layer of fabric (called outer layer Operating mechanism-Side winders (that lock the manually adjustable blinds at different levels with the internal ratchet and tension adjusted by spring inside the tube) 80 Providing and Fixingof Drawers in Brown Finish ,Specification-Material : High QualityParticle board Dimensions (In Centimeters)-H 91 x W 90 x D 44 Dimensions (in Inches)-H 36 x W 35.5 x D 17.5 Primary Material-Engineered Wood as per Engineer incharge 81 Providing and FixingSTAGE - Providing & fixing raised stepped floor (Stage) Consisting ofMS Tabular frame work ofPipe Section (HOT ROLLED/COLD ROLLED) size 50mmx 50mmx2.0mm.tk. duly Painted with one coat of Red Oxide steel Primer, fabricated in module of 600 x 600 mm frame gid (as per Design or as instructed) with support of same section Legs /frame fixed on existing floor from base and raised at height minimum 150mm to max 200mm as required, from Existing floor. Vc providing and fixing 18mm thick heavy duty high density (1450 kg/cum) cement fiber Board fixed by SS. Screw on Horizontal & Vertical Surface on Existing Framework with one coated cement primer on Board and covering Board from top and sides by 2mm thick Vinyl flooring of approved make,colour and texture to be layed and fixed on sub floor smoothly finished and levelled by recommended adhesive cutting fixing and including covered raised portion of Board from all sides etc. complete,suitable for use up to the satisfaction of Engineer- in-charge.Design as approved by Engineer-In-charge. Base ofthe Vertical Legs of M.S. Frame (COLD ROLLED/HOT ROLLED) 82 Providing, fixing & installation MICROPHONE:-Flat frequency response across the vocal range for uncolored sound interchangeable cardioid, supercardioid, and omnidirec- tional cartridges that provide choices for applications Sleek, low-profile design for unobtrusive appearance Balanced transformerless output for increased immunity to noise over long cable runs-Compact Cinema Surround Speaker for Digital Applications:- Frequency range: 50 Hz to 20 kHz • High sensitivity: 91 dB SPL, IW @ 1m (3.3 ft) High power handling capability: 150 watts, continuous pink noise Internal Thermomaster• technology allows for unprecedented high frequency power in a compact, molded enclosure Convenient mounting design supports JBL QuickMountre, OmniMount• or APC multimount brackets Special cabinet shape incorporates 20• angled front baffle SMPTE/lS02969 Curve X high frequency de-emphasisMixer 8 input mono mixer XLR input switchable between mic and line level +/- 15dB gain trim control per input Input 1 is switchable to be pre/post master 24VDC or mains power operation Optional remote VCA/Tone generator/ Muting boards available • Whisper quiet operation 83 Supply, Installation, Testing and commissioning of microphone Delegate unit. 84 Supply, Installation, Testing and commissioning of microphone Chaiman unit, 85 Supply , Installation , testing and commissioning of Factory made 1.4HDMl Cable along with connector (15mtr length) 86 Supply , Installation , testing and commissioning of Factory made VGA along with Connectors.(15mtr length) 87 Supply , Installation , testing and commissioning of Factory made RCA along with Connectors.(15mtr length) 88 Supply , Installation , testing and commissioning 40W power Amplifier of following features:- Rated output wattage - 240W, amplifier output IOOV, 70V and 4-16 ohms transformer isolated speaker outputs, Supply input 0.775 v (OdB) unbalanced, 10k ohms, XLR and phone jack frequency 89 Supply , Installation , testing and commissioning10W wall mount speaker- Supplying, installation, testing and commissioning of 240W power amplifier with following features:- Rated output wattage- 240W, amplifier output 100V, 70V and 4-16 ohms transformer isolated speaker output, Supply input 0.775 v (0 db) unbalanced, 10k ohms, ZLR and phone jack frequency response 50 - 18000 Hz, +/- 1.5 dB, S/N ratio > 105 dB. 90 Supply , Installation , testing and commissioningCONFERENCE CONTROL UNIT, line Output 1 17.5V DC/3a Max.; -34dBV (20mV), line Output 2 17.5V DC/3a Max.; -34dBV (20mV), power Output 50w rMS at 2% THD, 90w Max. inputs 3xMic 0.65mV/4.7kQ Ixaux IOOmV/470kQ Frequency response 60-14,000Hz (± 3dB) 91 Supplying of Material & Subtype Engineered Wood Finish Matte,Colour & Colour Family Brown - Wenge Dimension (W)800mm X (D)384mm X (H)1970mm Size Standard,Style Contemporary,Assembly Type Knock Down 92 Supplying of Powder Coated Extruded Aluminium Sections Hybrid panel based system (combination of sliding & snap fit tiles) Modular Work Stations 93 Supplying of11 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823 94 SUPPLYING AND PLACINGSLOTED ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE)6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY, 95 SUPPLYING AND PLACING : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 96 Providing and fixing e Slimline Tower AC (2 Ton White),Availability of BIS/ISI Mark Certification for Split AC Floor type-Yes,Technology of air conditioner,Non Inverter AC-Nominal Marketing capacity as per BEE Star Rating Label (hint: 1 Ton = 3000 Kcal/Hr, Tolerance +/- 10%) (in Ton)-3 BEE Star rating of the product (Central Ministries/Departments while procuring shall ensure that the items carry 5 star (under normal conditions where annual usages is expected to be more than 1000 hrs),3 Star (where usage is Limited)or higher Star R NA- Star rating for the capacity of >10,465 Watts (>9,000 kcal/hour) 97 Providing & Fixing 2.0 mm thick homogenous single layered vinyl flooring. The flooring shall be laid in manner to provide comfortable and jerk free surfaces including material, adhesive, scaffloding and lead and lift at all floor level etc. complete as per direction and approval of Engineer-in-charge. 98 Providing & Fixing Wiring for Primary Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insuate copperconductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point With 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Switch with Front plate and metal Box with all Accessroies for users. 99 Providing & Fixing Wiring for Secondry Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with all Accessories. 100 Providing & Fixing Wiring for Primary Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 101 Providing & Fixing Wiring for Secondry Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 102 Wiring for Primary Power point 6/16 Amp Switch-Socket Outlet with 4 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq-mm FR PVC insulated copper conductor Wire. Providing and fixing 1 nos 6/16A Socket controlled by 1 nos 16A switch with front plate and metal box with allAccessories. 103 Providing & Fixing Standing Bathtubs Specifications:Size:1690x800x445/565mm Free Standing Bath Tub with Over Flow & Drain 104 Providing & Fixing Corazzin Garden Patio Seating Chair and Table Set Outdoor Balcony Garden Coffee Table Set Furniture with 1 Table and 4 Chairs Set (Black) 105 Providing & Fixing Reliable Drapes Cotton Plain Door Curtains Reliable Drapes,Cotton GSM Quality-220,Lining included-No, Pack of-1,Length (Ft)-8.5-9,Width (Ft)-3-3.5 106 Providing MattressDimension 1981 mm X 1829 mm,Thickness of Core Layer (Height of Spring) 200 mm,Thickness of Felt (±1 mm) for Bonnell Spring 12 mm,Thickness of Top Layer (±2 mm)-50 mm Thickness of Bottom Layer (±2 mm)50 mm,Type of Spring in Core Layer Bonnell Spring (with cotton felt),Material of Top Layer Visco Elastic PU Foam (Memory Foam) 107 ProvidingCotton Pillow 33 cm x 56 cm (COTTON PILLOW)of Specification-BIS Marking ( For Body Casing fabric )-No Logo Marking-No,type of Logo,Stitched ( Patch Logo ),Agree to provide 108 Providing240 centimeter x C1112M 135 centimeter (L x W) Printed Bed Sheets(BED SHEET ):Technical Specification of the Product-Sheeting, Tickings and Bedsheets (V2) as per IS 175 BIS Certifcation-No,VarietyVariety - 2,Process of colouring Dyed,Matching Pillow cover 109 Providing 25 liter 3 Star Water Heater,25 Ltr 5 Star Water HeaterCapacity litres (Litres),BEE Star Rating (Central Ministries/ Departments while procuring shall ensure that the items carry 5 star or higher Star Rating of BEE)-3,Availability of Type Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification-No,Material of Inner Container Vitreous enamelled inner tank conforming to IS-13273 110 Providing Wall Mount Mesh Filter T-Shapped Kitchen-Chimney Material of Blower Body-Aluminium,Material of Blower Blade Aluminium,Material of Exhaust pipe-pvc,Filter Material,Stainless Steel,ShapeT-Shapped,Filter Type,Mesh Filter,Control Panel Type Soft Touch,Mount Type,Wall Mount 111 Providing Potable Water Purification System With Inbuilt Water Cooler. RO UV Aquaguard(Hot & Cold uv+ ro) Specifications-Flow rate (Litres/hr.)-12,Cold water storage capacity (Litres)-11 liter,Cooling capacity (litres/hr.)-4,Hot water storage capacity (Litres)-1.5 liter,Heating capacity (litres/hr.)-1.5,Cooling power consumption (Watts)-230,Heating power consumption (Watts)-550. 112 Providing300 L 3 Star Frost Free Double Door Refrigerator, of specification Cooling type:Frost free,Exterior body built:steel,Shelf material -Toughened glass,Voltage Range-160-300V,frequency-50 Hz 113 Providing900 mm wide 2000 mm high Metal Shelving Racks,Specifications :Type-OPEN TYPE Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted)-4,Shelves Material-0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513,Depth in mm (±5 mm)-400,Width in mm (±5 mm)-900,Height in mm (±5 mm) 2000 114 Providing and fixing Drawers of Specification of Dimension (in cm)-H91 X W90 X D44in Brown Finish,primary material-Engineered wood,Weight 49.45kg 115 Providing and fixingDressing Table With cupboard and open shelves-Design of Dressing table With drawers,cupboard and open shelvesBase of dressing table Rectangular wooden frame Number of side mirror-1 number, Material specification-Prelaminated particle board of grade II type III of IS 12823/Latest.both side laminated. outer side laminated with shade matching with top shade and fascia shade and having balancing laminate of 0.5mm thick on other side Material thickness of complete body, Fascia and drawer/cupboard-19 millimeter,Material thickness for back, partition and drawer /cupboard bottom ± 2mm,19 millimeter 116 Providing and fixing Material & Subtype Solid Wood - Rubber Wood Table Top Material Solid Wood-Frame Material Solid Wood,Finish Glossy,Colour & Colour Family Brown - Walnut Dimension Of Table (W) 600mm X (D) 600 X (H) 610mm Dimension Of Chair (W)640mm X (D)530mm X (H)560mm Size Standard 117 Providing and fixing Wooden Double Bed Storage Box Opening From Material of Mattresses Panel-Other wood, Material of Bottom Panel of Storage Box-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Front, Back and side Panels Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Headrest Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Legrest-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest,Type of Bed-Wooden Double Bed Material of Bed Frame-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest 118 Providing and fixing 1 Seater Sofa With Leatherite Cover Sofa Set is Foldable to use as bed-No Backrest Cushion Material-Foam,density of Cushion of Backrest Material (Kg/Cubic M)-40 Covering Material for Seat and Backrest Fabric Frame Structure Material and size (±1 mm) Any other wood of minimum 25 mm thickness Seat Cushion MaterialFoam 119 Providing and fixing 8 SEATER Rectangular MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823/(Elanor Marble 8 Seater Dining Set) 120 Providing and fixing MODULAR TABLE L X D & H 2000 millimeter X 450 millimeter 700 millimeter (Alice TV Unit marble),Sprcification-Mode of Supply of modular table Knocked Down to be assembled at consignee site by the Seller Storage Provided one side,Number of storage unit-triple storage,Table Top material and thickness ±3mm-25mm thickness three layer pre-laminated Particle boards (Wood Product) of grade II Type II of IS 12823 Latest Gable end and modesty panel material and thickness-18 mm thickness three layers pre-laminated Particle boards (Wood Product) of grade II Type III of IS 12823 Latest 121 Supplying of Library Management Department. and NDL Softwares,Server Machines, Air-Condition Systems,Xerox Machines,Lamination Machines, CONNECTION)Binding Machines,Furniture/Furnishing. Computers, Printers,Computer System(with Internet Connection) 122 Supplying of Printer of Specification A Printing Technology Laser-Cartridge Technology,Composite Cartridge,Type of Printing Mono,Paper Size-A4 Print Speed per minutes per Department Incharge 123 Supplying of XEROX Machine(standard company) Type of MachineMultifunction Machine,Print Technology-Laser Type of Printing-Mono,Cartridge Technology Separate Drum and Toner (Dual Component) Platen/Flatbed Size-A3/A4,Paper Size (Original/Image)A3/A3 RAM size (MB)-4096as per Department incharge 124 Supplying of Determination of wavelength of He-Ne Laser light using Grating(Specification- Output Power: up to 15mW, CW - Wavelength: 632.8nm,* Mode Structure: TEM00 (>95%)* Beam size: <= 1mm* Beam Divergence: <= 1.5 mrad* Polarisation: Unpolarised, Vertical Polarisation. complete set up as per Department incharge 125 Supplying of Brewsters Law using spectrometer(Brewsters angle apparatus differ goniometer digital research bench polarizer analyser with rail type bench abron). complete set up as per Department incharge 126 Supplying of Determination of wavelength of Sodium light using Michelson interferometer(Power-3 kW,Usage-Physics Lab,Material-Mild Steel,Power Source,Electric Voltage 240 V). complete set upas per Department incharge 127 Supplying of Determination of wavelength of Sodium light using FabryPerot interferometer complete set up of Specification Flatness of Reflective Mirrors-λ/20 Diameter of Reflective Mirrors-30 mm Reflectance of Mirrors-95% Effective Travel of Preset Micrometer~ 3 mm Min Division Value of Preset Micrometer-0.01 mm Travel of Fine Adjustment of Movable Mirror-1.25 mm Resolution of Fine Adjustment-0.0005 mm Low-Pressure Sodium Lamp-20 W as per Department incharge 128 Supplying of Resolving Power of Telescope complete set up (specification Color-BlackMaterial-Plastic as per Department incharge) 129 Supplying of Resolving Power of Prism(Resolving power of telescope assists the user to know the basic principle of telescope. Fabricated using excellent quality metals, glass and plastic material, it is widely used instrument in scientific lab of colleges and research centers. It is known for accurate calculation and longer service life) complete set up as per Department incharge 130 Supplying of Production and analysis of Polarised light using half and quarter wave plate(Usage/Application Laboratory Voltage-230 V,Color-Black,Material-SS). Complete set up as per Department incharge 131 Supplying ofLogarithmic Amplifier(Built in power supply : +15V & -15V DC,Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet,Weight : 2KGS APPX) complete set up as per Department incharge as per Department incharge 132 Supplying of Zener diode characteristics & voltage stabilizer. Complete-Specification:(Voltage-240 V Frequency-60 Hz,Display Type -Analog)in all respect as per Department incharge 133 Supplying of FET characteristics complete up(Technical specifications-Inbuilt variable, overload & short circuit protected DC regulated power supplies of 0- 5 volt & 0- 15 volt.Voltmeter & ammeter are mounted on the front panel.One FET.Highly insulated front panel .Trainer helps to demonstrate the working principle of FET.Set of required number of patch cords.Multi - colored sockets are used.Housed in an elegant powder coated metal cabinet.Strongly supported by a comprehensive instruction manual complete with theory and operating details.LED indication for supply “ON” to work on 220V AC Mains.) as per Department incharge 134 Supplying of MOSFET characteristics complete set up(Specificaion:Power-AC Mains,Usage/Application-Laboratory Type-Analog,Material-plastic,Power Supply-ac mains, as per Department incharge 135 Supplying of UJT characteristics complete set up(Specification-Usage/Application-laboratory,Type-Analog,Display Type-Analog meters,Power Supply-ac mains)as per Department incharge 136 Supplying of Transistor biasing (CE mode)(Specificaion-Operating Power Supply-220VAC On Board Power Supply 0-1VDC & 0-10VDC Experiment Input & Output Char In CB & CE Mode OF PNP Tr.Meter Type Analog / Digital)set up as per Department incharge 137 Supplying of Characteristics of SCR(SpecificationUsage/Application-laboratory Type-Analog Automation Grade-Manual ,Power Supply-ac mainscomplete set up as per Department incharge 138 Supplying of Basic Logicgates and Universal gates. Operating Supply Voltage 230V,Logic Family-DIGITAL,Number of Inputs per Gate-2,Usage Laboratory,Material-ELECTRONIC Complete set up in all respect as per Department incharge 139 Supplying of Op-amp Integrator &Differentiator. Complete set up in all respect :Product Specification:Type-Analog Material-Metal,Automation Grade=-Manual,Color-black with multicolour PVC front panel,Power Supply-230,Capacity--5,connector Type-patch cord sas per Department incharge 140 Supplying of Half Adder, Full Adder and 4-bit binary Adder. Complete set up in all respect (Product Specification:Type-Digital,Display Type-Digital Interface--NO Material-ABS,Display-Digital,Pulse Generator-50Hz Variable Dc Output-no)as per Department incharge 141 Supplying of G. M. Counter for 6 digits GM counter with built in power supply complete set up(G.M.COUNTER: COMPLETE WITH INBUILT POWER SUPPLY EHT 250-1200v Workable on 220v. 50Hz., Power consumption 8W approx. STOP, START, RESET switches. Counts Capacity : 6 DIGIT COUNTING SYSTEM, Preset time : 3 DIGIT PROGRAMABLE TIMER WITH DIGITAL DISPLAY. 3 ½ Inbuilt Digital Volt Meter for GM TUBE Voltage. G.M.TUBE: END WINDOW G.M.TUBE MOUNTED IN ACRYLIC STAND. WITH ‘LEAD’ AND ‘ALUMINIMUM’ ABSORBENTS, Radioactive Source: ONE RADIOACTIVE SOURCE BETA or GAMMA (in Lead Container and wooden Box) SOURCE, . Dimensions : 460X370X230mm.(Complete instrument is HOUSED in corrugate box with Export Packaging) Wight : Total weight of the Instrument is 5.5kg.) as per Department incharge 142 Supplying of Measurement of Dielectric constants of solid and liquid samples complete set up(It Consists of following partsRF Generator (9-10MHz Approx) Micro Ammeter (Range 0-50mA) Potentiometer for Sensitvity Selection Fixed Capacity (Metal) Variable Gang Capacitor Socket for test Capacitor & Variable Capacitor brought out at front panel One Solid bakelite plate to be insert in gap of test capacitors)as per Department incharge 143 Supplying of Study of Dielectric constants and Curie temperature of ferroelectric ceramics Complete in all respect(Specifications Temperature Range : Ambient to 200°C,Display : 31/2 digit, 7 segment LED with autopolarity & decimal indicationResolution : 0.1°C,Accuracy : ±0.5°C (typical),Stability : ±0.1°C Power : 150W,(ii) Digital Capacitance MeterThis a compact direct reading Instrument for the measurement of capacitance of the sample. Specifications,Range : 50-6000 pf,Resolution : 1pf Display : 3½ digit, 7 segment LED, Typical results obtained with the above set-up are as shown in the graph) as per Department incharge 144 Supplying of Determining Optical constants of a metal by reflection of light Complete in all respect (Specification-Power-AC Mains,Usage/Application-Laboratory,Type-Digital Material-Metal,Automation Grade Manual,Color-White Power Supply-AC Mains,Display Type-Digital) as per Department incharge 145 Supplying of Lattice dynamics kit with frequency meter (Technical Specifications: Audio Oscillator 100 khz,Built in Power Supply and Output Stage to match the Impedance of Simulated Lattice,Lattice DynamicKit consists of Transmission line, which Simulates One-Dimensional Mono-AtomicandDi-atomicLattices,. LCD Based Frequency Counter is Provided on panel to Measure Frequencycomplete set up as per Department incharge 146 Supplying of BCD to seven segments complete set up(Specification:Built in power supply : +5V DC Mains : 230V AC Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX) as per Department incharge 147 Supplying of Monostable Multivibrator using Oscilloscope (CRO) complete set up (Specification:Usage/Application Laboratory Packaging Type-Corrugated Box,Connector-2mm sockets Frequency Range -50Hz) as per Department incharge 148 Supplying of Bistable multivibrator using Oscilloscope(CRO))Technical Specification:(Built in power supply : +12V & -12V DC Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX)complete set up as per Department incharge 149 Supplying of Pulse code modulation and demodulation complete setup (Product Specification,Type Laboratory Trainer Kit Usage/Application-Laboratory,Accuracy-+/- 10%,Frequency-50 Hz Input Voltage-220V,Packaging Type-Corrugated Box,Power Source-ElectricShape-Rectangular,Material-ABS or Metal Cabinet)as per Department incharge 150 Supplying of Addition, Subtraction, Multiplication using 8086 microprocessor(Product Specification,Usage/Application-LaboratoryType-Fully Automatic,Automation Grade-Semi-AutomaticClock Frequency-Yes,Color-Green,Display-Digital Packaging Type-Corrugated Box, Power-200-400 Weight 2 Kg) as per Department incharge 151 Supplying of Thevenin theorem, (THEVENIN’S AND NORTON’S THEOREM APPARATUS,Technical specifications Inbuilt fixed DC regulated power supply of 12 volt. Voltmeter & ammeter are mounted on the front panel. Resistive network is used in the circuit. Circuit diagram is printed on highly insulated front panel . Trainer helps to demonstrate the working principle & verification of Thevenin’s & Norton’s Theorem based on resistive circuit. Student can calculate & measure the value of current & voltage for different load circuits. Calculation of power consumed by the circuit. Facility for connecting external Power Supply. Set of required number of patch cords. Multi - colored test points are provided in the circuit to observe voltages at different points. Housed in an elegant powder coated metal cabinet. Strongly supported by a comprehensive instruction manual complete with theory and operating details. LED indication for supply “ON” to work on 220V AC Mains. Circuit protection through glass fuse)Complete set up as per Department incharge as per Department incharge 152 Supplying of Active filter set up(Product Specification Operating Temperature-0-50,Frequency (Hz) 50,Condition-New Temperature (deg. Celsius)-50,Usage/Application Industrial, Educational, Residential, Commercial) as per Department incharge 153 Supplying of A to D counter type complete set up (Product Description-M-32 AD M-16 AD,Input AD: 1/4 TRS jack and 25 pin D-sub, servo balanced, completely symmetrical audio path, Output AD: 4 x ADAT optical, 1 x MADI optical/coaxial,Dynamic Range AD: 113 dB RMS unweighted, 116 dBA,THD AD: < -110 dB (< 0.00032 %),THD+N AD: < -104 dB (< 0.00063 %) Crosstalk AD: > 130 dB,Input level for 0 dBFS: +24 dBu, +19 dBu, +13 dBu,Frequency response AD, -0.1 dB: 10 Hz - 23.2 kHz (sf 48 kHz),Frequency response AD, -0.5 dB: < 5 Hz - 45 kHz (sf 96 kHz) Frequency response AD, -1 dB: < 5 Hz - 80 kHz (sf 192 kHz) Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz, variable (Sync/WC),Jitter: Typical < 1 ns for internal, Word Clock, ADAT and MADI input Jitter sensitivity: all PLLs operate error-free even at 100 ns,Jitter suppression: > 30 dB (2.4 kHz),Power supply: Internal switching mode PS, 100V - 240V AC, 60 Watt Dimensions: (WxHxD) 483 x 88 x 200 mm)as per Department incharge 154 Supplying of Determination of Plancks constant(1. 1 0-2V D.C. at 20mA Variable Power Supply. 1.2 Digital Panel meter 3½ digits range 2mA. 1.3 Digital Panel meter 3½ digits range 2 volt 02 Lamp House: 100W Bulb with stand 03 Vacuum Type Photo Cell : Mounted in a Iron box. 04 Three different colour optical filters 05 Adequate no. of patch cords stackable 4mm spring loaded plug length 50cm. 06 Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.) as per Department incharge 155 Supplying of Determination of Energy Band Gap using Four Probe method(Product Specification:Type-Energy Band Gap Usage/Application-Laboratory,Connector-4mm Banana Socket Frequency-50Hz) as per Department incharge 156 Supplying of Determination of Hall coefficient and Hall angle in Hall-effect(Product Specification,Display Type-0-20V DC, 0-5 A, digit LED, Primary safety socket,4mm Electro Magnet Coils 500 T, Voltage resolution -0.1V,Current Resolution 0.1 A) as per Department incharge 157 Supplying of Determination of magnetic susceptibility using Guoys method(Usage/Application Physics Laboratory Type Of Instruments-Magnetic Susceptibility Gouys Balance Method Experiment Setup,Power-230V , 50Hz, +-10% Display Type-LED Type) as per Department incharge 158 Supplying of Study of absorption pattern of a given sample using FTIR spectrometer(Product Specification,Detector-High performance pyroelectric infrared detector,Weight-15 kg Software-1,Voltage-100-240V AC,Electronic System-24bit A/D converter at 500KHz, USB 2.0,Wavenumber Range-7800~350 cm-1Power-100-240V AC,50/60Hz,Signal Noise Ratio-30000:1 (resolution@4cm-1 , sample and background scan for 1 min@2100cm-1 ),Light source-Long life, steady state infrared emitter Beam splitter-coated KBr,Resolution-1 cm-1,Dimension-430mm x 360 x200) as per Department incharge 159 Supplying of LCD Projector and smart board (Product Specification,Projection Distance-<1 m Resolution-WXGA,Lamp Life-5000/9000/10000 HOURS Screen Size-100,Display Type-LCD,Dimensions-400X367X149MM Connectivity Type-Dual HDMI, HDMI,Brightness-2000-4000 Lumens Color-White) as per Department incharge 160 Supplying of Desktop(ntel Core I3/ 10th Gen/ 4GB RAM/ 1TB HDD/ DOS/ NO DVD/ 19.5 Inch Monitor/ 1 Year Warranty) as per Department incharge 161 Supplying of Printer(Product Specification,Printer Type-Ink Tank Color Output-Color,Print Speed-22 ppm,Paper Size-A4,Dimension-403 x 369 x 150 mm,Weight -6,Warranty-One Year or 50,000 pages which ever is earlier) as per Department incharge 162 Supplying of Printer (Product Specification Printer Type-Inkjet Color Output-Color | B&W,Print Speed-10,Paper Size-A4,Connectivity-USB,Dimension-377 x348 x179,Weight-3.9 Print Volume-any)as per Department incharge 163 Supplying of XEROX Machine (Product Specification,Functions-Photocopy,Supported Paper Size-A3,Supported OS-Windows 10 Color Output-Black & White,Number Of Trays-1,Item Color-Black & WhitePrint Speed-22 PPM,Weight-40 kg,Print Technology-Laser Input Tray Capacity-350 sheets,Warm-Up Time-5.6 Sec,Duty Cycle-80000 / Month,Resolution-600 x 600 dpi Connectivity-Ethernet & USB,Duplexing-Yes)as per Department incharge 164 Supplying of computer system with internet connection,PC Specifications to be followed :Processor Intel Core i5(10th Gereneration or newer ),RAM-8 GB or Higher HDD:512 GB,SSD,Monitor 24 LCD Monitor .OS:Windows 10 Professional ,Anti virus:User Licence for one year as per Department incharge 165 Supplying of Laptop (with Internet connection),Processor intel Core i5(11th Generation or newer),RAM 8 GB or higher HDD:512 GB,SSD Monitor 14 screen ,OS Windows 10 Professional ,Antivirus :User Licence for one year 166 Supplying of LCD Projector (Specification-Brightness:2000-4000 Lumens,Resolution-FULL HD 1080P,Connectivity Type-Dual HDMI, HDMI Display Type-DLP,Power Supply-100-240V Portable-Yes) as per Department incharge 167 Supplying of Smart Board (Frame Material-Aluminium Usage/Application-School, Education, etc,Effective Touch Area-72 x 48 inch Material-Ceramic Input Method-USB Power Consumption-150 - 220 W,Shape-Rectangular) as per Department incharge 168 Supplying of MS Suite Software(Specification-Microsoft Office Software,Operating System:For Windows,Brand:Microsoft )as per Department incharge 169 Supplying of Adobe Photoshop Software(Specification -Graphic Design and Photo editing,Licence-1 yea) as per Department incharge 170 Supplying of windows10 OS Software(Specification-License Duration-Life Time,Architecture-32/64 Bits,Operating System For WindowsAlso Provides,Windows Operating System,Provide Installation Service-Yes Support 24/7 (Live Rep)) as per Department incharge 171 Supplying of Laptop of 11th Generation intel core i3,1115G4 processor (6 MB Cache up to 4.1GHZ)windows 10 Home Single language English,intel UHD Graphics with shared graphics memory 8GB ,8 GBX1,DDR4,3200 MHZ,512 MB,2 PCLeNVMe Solid state drive pebble (Top colour is pebble colour,Base and palmrest are black colour as per department incharge 172 Supplying of Desktop of 10th Generation intel core i5-10500T (6 CORE,12MB Cache 2.3GHZ to 3.8GHz,35W ),Windows 10 Pro (64 Bit )English,intel integrated graphics),8GB ,1X8 GB,DDR4 non-EC0C Memory,2.5 inch TB 7200 RPM ,SATA Hatd disk drive 5480AJO 23.8 FHD 1920X10080 ips non touch,Antiglare camera,integrated graphics,Bronze 1505w PSU as per department incharge 173 Supplying of Printer (Specification:Item Weight-12 Kg,Package Dimensions-60 x 56.5 x 38 cm,Connectivity Type-Wi-Fi Operating System-Windows)as per department incharge 174 Supplying of Fumehood(Specification:Type-exhaust,LED-Tube fitting,Power-230 volt,Working Top-Granite ,MOC-GI with PU coated Storage includedas per department incharge 175 Supplying of electronic balance(Specification -Usage/Application-Laboratory,Accuracy-0.01%,Calibration-Fully Automatic,Type Of Weighing Scale-Digital,Voltage-110-220 V Mounting Type Desktop) as per department incharge 176 Supplying of Magnetic stirrer Magnetic stirrer Hot plate (Specification-Weight-2.3 kg,Timer -999 minutes,Temp. Accuracy-+-1 Deg.C(<100 Deg.C)+-3 Deg.C(<300 Deg.C),Dimensions LxWxH (mm)-230 x 180 x 120,Max.Temp. (Plate Surface) 300 Deg.C,Power supply-AC 220V / 50 Hz,Top Plate Size 135 x 135 mm,Display-LCD,Max. Volume (ml) 2000 ml,Speed (RPM)-1250 RPM Plate Material Steel per department incharge 177 Supplying of HOT Air oven of made inner material-stainless steel,Outer material -mild steel ,Surface treatement -Powered coated ,Sizes-Different sizes,Gravity conviction type-Double wall.Mechnical conviction -Triple wall as per department incharge 178 Supplying of colourimetry , Ery colour colorimeter industrial and research purpose stability( Product Specification:Material-Aluminium Alloy,Automation Type Automatic,Brand -DD-LAB ,Dimension-210 x 160 x 80 mm,Display Type-Dual Digital DisplayLight Source-Highly Accurate Laser Source,Stability- + 0.02 O.D. Per Hour Volume 1 ml. minimum,Filters layer-Built in 9 Digital filters 30,000 hours Life,Weight-1.5 Kg,Battery Backup-6 V Ni CD Re-chargeable Battery,Detector Silicon Photo-diode,Display Model Absorbance & Wavelength,Filter Wavelength 680 NM Country of Origin Made in India) as per department incharge 179 Supplying UV-Vis Spectrophotometer Fully touch screen portable UV Spectrophotometer shimadzu model name:UV 1900,Brand :shimadzu,Display =fully touch screen,Type-portable,size 450x501x244 as per department incharge 180 Supplying of potentiometer ,Range-0 to 1999.9mv,Resolution-1 mv,Repeatability -1mV,Accuracy +1 mv+ digit,Input impedency-10ohms,operating temperature 10 to 50 degree Celsius,Display 1/2 digit 0.5 seven segment LED Display indication,Power-230V+10,50hZ,Dimensions 76x275x170 mm,weihjt 2 kh as per department incharge 181 Supplying of Conductivity meter,LT 26 Deluxe conductivity meter,Product details:Model no-LT-26,Brand -Labtronics,Usage-Laborataty,Display type 3.5 Digit LEDas per department incharge 182 Supplying of Online COD/BOD Detector analyzer warer quality monitoring probe,Measure range-0-200/0-1000mg/l,Resolution -1 mg/l ,Accuracy +5%F.s ,Under pressure-1 bar,Power supply -12-24V DC ,Temperature range 0-45 degree ,Production leve;-IP68 as per department incharge 183 Supplying of melting point appratus,Temperature renge -2 degree above ,Readability 1 degree ,Display -3 Digit LED,Heating rate control-Electronic,Temperatre sensor PT-100as per department incharge 184 Supplying of Ph meter Labrtonics,Range:0-14pH,Resolution:0.01pH,Accuracy:0.01pH(Relative),Temp comp:Automatic wvith temp probe,Buffer:Manuals with keys as per department incharge 185 Supplying of Spectrum 3 FT-IR Spectrometer,Model no.-LI280127,Wave length -11000-30 cm-1 as per department incharge 186 Supplying of Stopwatch NIVIA 600 plastic(Product Specification:Color-Black,Usage/Application-Sports,Time Display 12/24 hour display for user option,Material-Plastic,Dial Shape-OvalMaximum Counting-23 hours 59 minutes 59 secondsas per department incharge 187 Supplying of Digital Bomb Calometer(Specification-Auto Off Automatic,Frequency-50 Hz,Voltage-230-280 V,Operating Time Per Test 10 minutes,Power Source Electric(Automatic) as per department incharge 188 Supplying of Microprocessor viscometer ,Product details: Measuring range-101x105mpa,,Spindles-4 Spildles,Rotor speed(rpm)-6/12/30/60 rotor speed rpm as per department incharge 189 Supplying of Flame photometer,Product details:Application-Laboratory use,industialuse,,weight 705kg ,Curve fit accuracy,Resolution-0.1ppm/meq as per department incharge 190 Supplying ofwater purification system,Resolution-18.2 M ohm cm at 25 degree C,Weight-19.5kg,Frequency-50-60Hz as per department incharge 191 Supplying of Refrigerator of 7.5kg fully Automatic Top Load washing machine (Hard water wash,Grey,5 star,10 years warranty as per department incharge 192 Supplying of water bath ,unstirred water bath s ,Digital info Water bathdigital,18L amb+5 tp 99 degree C includes clear lid and base trayas per department incharge 193 Supplying ofmini rotary shakers 50to 400RPM,features-220/230 V ac,Power supply-50-60Hzas per department incharge 194 Supplying of Magnetic stirrer- capacity 5 litre Spinit Digital Magnetic Stirrer Features-Type of Product-Magnetic stirreras per department incharge 195 Supplying of Digital ultrasonic cleaners (Specification: tank capacity 4 L, ultrasonic power 100W, Heating, Power-100W, time setting 1-99 min, heating temp up to 80 degree, in and out both in ss, with digital timer auto stop of sonication. 230V AC +-10% 50HZ. Tank size 300x150x100mm, overall size 330x180x240mm.supplied with basket and Lid.) as per department incharge 196 Supplying of Calomel electrode (Product Specification:Packaging Type-Box.,Length-120 mmUsage-Electrochemical Study(Laboratory))as per department incharge 197 Supplying of Pt-wire counter electrode (Product Specification Electrode Diameter-0.5 mm,Power Source-10A) as per department incharge 198 Supplying of UV-LAMP Cabinet(Product SpecificationSize/Dimension-15 X 12 X 10 (H) Light Source-3 NOS , SHORT WAVE -254nm-1no, LONG WAVE-365nm, VISIBLE LIGHT,Material-MILD STEEL,Voltage 230 V AC) as per department incharge 199 Supplying of Magnet (Magnet Grade-N48 Shape-Cup & Pot,Material Neodymium,Dimensional Tolerance+-0.05 mm,Plating / Coating-Ni-Cu-Ni Colour-red,Surface Gauss 3000 Gauss,Maximum Working Temperature (Deg. C)-230 Deg. C as per department incharge 200 Supplying of Micro Centrifuge tube(Specification: Usage/ApplicationLaboratory Analyzers,Material,Polypropylene Color-White,Pack Contains--20 Packet / carton & 500 pcs / packet,Shape-Conical,Length-4.1 cm,Inlet Diameter-1.3 cm Capacity2 ml)as per department incharge 201 Supplying of Micropiprtte(10-100uL),(Product Specification Capacity-10 ml,Volume Increment -0.1 microlitre Material-Glass,Autoclavable-Yes)as per department incharge 202 Supplying of Micropiprtte(10-1000uL),( Product Specification Material-Plastic,Capacity-Up to 1000ul,Color-Transparent Usage/application-Chemical Laboratory) as per department incharge 203 Supplying of printer-Black and white print ,scan,copy all in one printer Product Specification Print Speed-Up to 18ppm / 19ppmLaser Printer,Color Output-Black & White,Print Technology LaserjetUsage/Application-Printing,Supported Paper Size-A4 Compatible Operating Systems1,Windows 8,Windows 7,Windows Vista,Windows XP,Windows 2000,Mac OS X 10.4 - 10.8,Linux*3 Print Resolution-Up to 600 x 600DPI,1 200 (Equivalent) x 600DPI,Print Language-UFR II LT Dimension-372 x 371 x 254mm (With the Cassette Opened)Weight(W/O CRG)-7.6kg,Monthly Duty Cycle-8000 Pages Power Consumption 960W(Maximum),First Printout Time7.8s / 7.7s (A4 / LTR),Zoom 50 - 200% in 10% Increments Refill Type Toner Cartridge,Internal Memory 64 MB Printer Language UFR II LT (Host Based),Paper Weight 60 to 163g/m2 (Cassette),Copy Speed Up to 18 / 19Cpm (A4 / LTR) Halftones 256 levels,Copy Resolution 600 x 400 DPI Display 7 - Segment,1 - Digit LED as per department incharge 204 Supplying of printer-colour print ,scan,copy all in one printer (Specification :Functions-Print | Scan | Copy,Technology-Inkjet Color output-Color | B&W,Connectivity-Wireless(Wi-Fi) Usage-For Office ,Paper size-A4,Print speed upto 40 pages/min)as per department incharge 205 Supplying of photocopier branded fast print 50ppm high image resolution superior print quality,fast scan up to 50ppm A4 Monocolouras per department incharge 206 Supplying of LAN.Networking,cabling,switches,Wi-Fi points(10 points in each department) as per department incharge 207 Supplying of installation of Printer (Black and white),Printer( colour),Photocopier and LAN,Networking,Cabling,Switches,Wifi Points as per department incharge 208 Supplying of RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio as per department incharge 209 Supplying of Freightof RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio) as per department incharge 210 Supplying of wall mount (Dimension long:Telescopic Adjustable CCTV camera mounting bracket -Color: Beige Universal Camera Bracket, Heavyduty weatherproof iron bracket fits mostbrands of outdoor camera housing,Iron stand Platsic APPLICATION: Ideal for indoor outdoor dome cameras, Security Camera Mount Bracket, high quality with professional design,more stable and reliable.Hidden hole: Cable can feed thru L bracket tothe housing thus provide cable protection Outdoor and Indoor Use.)as per department incharge 211 Supplying of Camcorder Compact full HD ENG Camera with 20X zoom and 5 axis image stabilization. 20X optical zoom (26.8mm, F/1.8-576MM, F/2.;28.8MM, f/1.-576mm). 5 axis image stabilization. Support formats: full HD50P/60P, AVCHD/MP4;SD card slots 2 35mm film camera equivalent when dynamic IS is turned on with Tripod as per Department Incharge 212 Supplying of Video capture and video capture card (Product Specification:Converter type-USB,Material:Metal,Audio Jack:3.5 mm,HDMI Version:Hdmi-1.4,Audio:44100 AU,Video:Full HD Frame:48000 Resolutions)as per department incharge 213 Supplying of UPS(1KVa)(Product Specification: Type-Online UPS,Capacity-1 kVA,Configuration-1 Phase IN - 1 Phase OUT,Protection-OverVoltage,Form Factor-Tower Model Back Up Time-20- 30 Mins,Frequency-40 ~ 70 Hz (auto-sense) Usage/Application All) as per department incharge 214 Supplying of Studio light-125watt,5 LED BULBS consisting of 25watt bulb(Colour Temperature:5500 kelvin)as per department incharge 215 Supplying of Live streaming software for live streaming or live telecast as per department incharge 216 Supplying of Cables,installation,SSD Card(SAMSUNG VNAND SSD 850 EVO 2.5 250GB SATA III 3-D Vertical Internal Solid State Drive (SSD) MZ-75E250B/AM) as per department incharge 217 Supplying of complete making soundproof class(20*20 feet Room) as per department incharge 218 Supplying of RFID Tags RFID Book Lables(specification: Language ‏ : ‎ English,Simultaneous device usage ‏ : ‎ Unlimited Text-to-Speech ‏ : ‎ Enabled,Screen Reader ‏ : ‎ Supported Enhanced typesetting ‏ : ‎ Enabled,X-Ray ‏ : ‎ Not Enabled,Word Wise ‏ : ‎ Not Enabled) as per department incharge 219 Supplying of Anti theft stickers with the university logo(Polycarbonate 175 Microns Matt Finish) as per department incharge 220 Supplying of Middleware Application Desktop(writing and read tags) as per department incharge 221 Supplying of RFID Staff station or desktop reader (used for Tagging of books and circulation) operations through RFID as per department incharge 222 Supplying of Integration with software and Training of complete RFID System as per department incharge 223 Supplying of Data Encoding,Booking Tagging and Registration per book as per department incharge 224 Supplying of RFID Secuity Gates (2 pedestals - 1 gate),RFID Secuity Gate(Provide Installation Service-Yes,Support-24/7 (Live Reporting Language Support-English) as per department incharge 225 Supplying of Automated book drop box (ntegrated RFID Reader • Approx. 250 Books Receiving Cart (Movable) • Client Software for Checking-in Facility and communicating with LMS with provision for E-mail/SMS confirmation • Has automatic hutch which should open only on valid RFID tags and close once the book has been accepted to prevent the patrons from removing checked in books. • Communication with any LMS Software through SIP2/NCIP protocols • Compliant with internationally recognized standards for RFID based library self-services systems. • Book Drop can display item ID once item is returned. • Enabled with necessary items i.e.: Branded CPU etc. • 15” or higher LCD/LED Touch Screen Monitor. • Ethernet High Speed Receipt Printer (Reputed/Branded) • Customizable Design matching the library aesthetics; Contemporary and attractive. • Design is such that there is not damage to the dropped books. • Library Ethernet network and wireless network compliant. • Optional Features: Fingerprint Scanner, Smart Card Readers etc) as per department incharge 226 Supplying of 5KVA Invertor -online UPS with battery back up 100Mah battery (8 units)(Product Specification,Capacity-1100 Voltage-130V ,Rated Input Power-5 KVA,Display-Digital Type-Square Wave Inverter Country of Origin) as per department incharge 227 Supplying of LAN,Switches,Necessary cabling,casing,power supply port including cables as per department incharge 228 Supplying of Installation charges of RFID Tags,Anti-theft sticker,Middleware Application Desktop,RFID Staff statio,Integration of software,Data incoding books,RFID Secuirty Gates,Automated Book Drop Box,Cabling,Casing,Wiring,Switches,LAN as per department incharge 229 Supplying of Air conditioning 1.8Ton heavy duty AC (minimum 3 star rating,Coil material -copper,Power consumption-1950W,Power Requirement -AC 130-285V, 50Hz) as per department incharge 230 Supplying of Desktop,i5 processor ,7th Generation,500GB HDD,4GB RAM,23.8 INCH LED Backlit Monitor,Full HD IPS Panel(Brand-HP,Dell,Acer) as per department incharge 231 Supplying of Headphone with built in microphone,(Communication-Wired) as per department incharge 232 Supplying of 75 diagonal length with 3 GB RAM and 48 GB ROM ,Slim frame anti glare glass.3M Antiglare ,H7 Touch surface hardness,Light weight for easy installation as per department incharge 233 Supplying of Dedicated server-HPE Proliant DL 380,Gen 10 5218.2.3GHz 16core ,1P-32GB-R P408ianNC 8SFF 800WPS Server,Intel xeon G5218 Kit for DL 380,Gen 10 as per department incharge 234 Supplying of 5.5KVA Inverter with battery backup,Microtek inverter,online UPS ,65Mah battery(16 unit )-Exide as per department incharge 235 Supplying of Freight Transportation Charges of Desktop,Headphone,LAN Switches,4K-OPS,Dedicated server,5.5 KVA Inverter with battery back up and Air conditioner as per department incharge 236 Supplying of 86 Diagonal interactive display,3 GB RAM,48 GB ROM,4K Display Android model,Slim framenAnti glare Glass,H7 Touch Surface hardness ,Light weight for easy installation ,Media Suits for Annotation softwatr bundled with education Apps as per department incharge 237 Supplying of 4k OPS i5,7th Gen,8GB RAM,128 GB SSD as per department incharge 238 Supplying of play mounting including white board & Green board,Material post formed ply,Size 15ft(length)x7ft(ht) with green board for chalk,whiteboard for marker and cupboard as per department incharge 239 Supplying of UPS (1KVa,Phase-Single phase.Back up Time 10-20 min,Frequency-50Hz) as per department incharge 240 Supplying ofTraining and installation of 86 diagonal interactive display,4k-OPS,Play mounting including white board & Green board and UPS of 1KVA as per department incharge 241 Supplying of Digital Podium PTGN 500 Windows 8.1 LCD ,Electronic Lectern,On site OEM Warranty in 3 yearsas per department incharge 242 Supplying of PA System sound system with amplifier 350 watt ,30 watt speaker (4 nos) as per department incharge 243 Supplying of wireless mic Dual channel cordless microphone as per department incharge 244 Supplying ofTraining and installation of Digital Podium,86 Diagonal interactive display (4k display),4K-OPS,Play mounting including white board and green board,5KVA invertor,PA System and wireless mic as per department incharge 245 Supplying of Desktop :- 1).i5 Processor, 7th Generation, 500GB HDD, 4GB RAM, 2).23.8 inch. LED backlit Monitor Full HD IPS Panelas per Department Incharge 246 Supplying of 55 LED Display for CCTV Branded LED Display as per department incharge 247 Supplying of CCTV Camera IP based CCTV camera,2 TB Space with NVR with necessary accessories as per department incharge 248 Supplying of Stagmometer as per Department Incharge 249 Supplying ofViscometer as per Department Incharge 250 Supplying of Beaker-50ml as per Department Incharge 251 Supplying of Beaker-100ml as per Department Incharge 252 Supplying of Beaker-250ml as per Department Incharge 253 Supplying of Beaker-500ml as per Department Incharge 254 Supplying of Beaker-1000ml as per Department Incharge 255 Supplying of Buchner Funnel 3 as per Department Incharge 256 Supplying of Buchner Funnel 6as per Department Incharge 257 Supplying of Burette-50ml as per Department Incharge 258 Supplying of Chromatography column 1x18 with stop cock as per Department Incharge 259 Supplying of Conical flask-100ml as per Department Incharge 260 Supplying of Conical flask-250ml as per Department Incharge 261 Supplying of Conical flask-500ml as per Department Incharge 262 Supplying of Conical flask-1000ml as per Department Incharge 263 Supplying of Flat Bottomflask-500ml(Round) B-24 socket as per Department Incharge 264 Supplying of Round bottom flask-50ml Joint B-24 as per Department Incharge 265 Supplying of Round bottom flask-100ml Joint B-24 as per Department Incharge 266 Supplying of 3 neck RB flask B-29,B-19.as per Department Incharge 267 Supplying of Condenser Spiral B-24 and, B-19 as per Department Incharge 268 Supplying of Condenser Spiral B-24 and, B-24 as per Department Incharge 269 Supplying of T-type tube as per Department Incharge 270 Supplying of Rubber Cock No. 10 as per Department Incharge 271 Supplying of Specific Gravity hydrometer 800-1000 as per Department Incharge 272 Supplying of Specific Gravity hydrometer 100-1200 as per Department Incharge 273 Supplying of Universal hydrometer 1000-2000 as per Department Incharge 274 Supplying of Measuring Cylinder-10ml as per Department Incharge 275 Supplying of Measuring Cylinder-50ml as per Department Incharge 276 Supplying of Measuring Cylinder-100ml as per Department Incharge 277 Supplying of Measuring Cylinder-500ml as per Department Incharge 278 Supplying of Measuring Cylinder-1000ml as per Department Incharge 279 Supplying of Measuring Cylinder-2000ml as per Department Incharge 280 Supplying of Measuring flask-100ml as per Department Incharge 281 Supplying of Measuring flask-500ml as per Department Incharge 282 Supplying of Measuring flask-1000ml as per Department Incharge 283 Supplying of Pipette-0.5ml as per Department Incharge 284 Supplying of Pipette-2ml as per Department Incharge 285 Supplying of Pipette-5ml as per Department Incharge 286 Supplying of Pipette-10ml as per Department Incharge 287 Supplying of Pipette-25ml as per Department Incharge 288 Supplying of Separating Funnel-250ml B-24/B-24 as per Department Incharge 289 Supplying of Spatula Flat Spoon 6as per Department Incharge 290 Supplying of Spatula Flat Spoon 5as per Department Incharge 291 Supplying of Stop Cork 2wayas per Department Incharge 292 Supplying of Silica crucible-15ml without Lid as per Department Incharge 293 Supplying of Silica crucible-25ml without Lid as per Department Incharge 294 Supplying of Stalagmometer Straight Graduated as per Department Incharge 295 Supplying of Chemical thermometer 10c-110c as per Department Incharge 296 Supplying of Chemical thermometer 0c-250c as per Department Incharge 297 Supplying of Tiration flask-100ml as per Department Incharge 298 Supplying of Tiration flask-250ml as per Department Incharge 299 Supplying of Tongs crucible S.S.8 as per Department Incharge 300 Supplying of Test tube holder as per Department Incharge 301 Supplying of Filter Flask-500ml as per Department Incharge 302 Supplying of Filter Flask-1000ml as per Department Incharge 303 Supplying of Watch glass 3 as per Department Incharge 304 Supplying of Watch glass 4 as per Department Incharge 305 Supplying of Watch glass 6 as per Department Incharge 306 Supplying of Wire gauge150x150mm as per Department Incharge 307 Supplying of Tripod stand 8 as per Department Incharge 308 Supplying of boiling Test tube 1x8as per Department Incharge 309 Supplying of boiling Test tube 2x8as per Department Incharge 310 Supplying of Reagent Stickers 2x1 as per Department Incharge 311 Supplying of Ordinary Filter paper as per Department Incharge 312 Supplying of Reagent bottles-250mlas per Department Incharge 313 Supplying of Rubber cork as per Department Incharge 314 Supplying of Rubber tube 6mm as per Department Incharge 315 Supplying of Solid Reagent bottle-125mlas per Department Incharge 316 Supplying of Stopwatch plastic body as per Department Incharge 317 Supplying of Test tube stand 12 holes as per Department Incharge 318 Supplying of Thermometer 360 as per Department Incharge 319 Supplying of Test Tube 6mmx15cmas per Department Incharge 320 Supplying of Test Tube 10mmx10cm as per Department Incharge 321 Supplying of China dish 3 as per Department Incharge 322 Supplying of China dish 4 as per Department Incharge 323 Supplying of Brushes for Test Tube as per Department Incharge 324 Supplying of Brushes for Burette as per Department Incharge 325 Supplying of Brushes for Conical flask as per Department Incharge 326 Supplying of LPG gas burner as per Department Incharge 327 Supplying of Condenser Coil 12 as per Department Incharge 328 Supplying of Receiving adopter with vacuum outlet as per Department Incharge 329 Supplying of Plastic Wash bottle-500mlas per Department Incharge 330 Supplying of Pastel and Mortar 3 as per Department Incharge 331 Supplying of Pastel and Mortar 4 as per Department Incharge 332 Supplying of Pastel and Mortar 6 as per Department Incharge 333 Supplying of China Clay 2 as per Department Incharge 334 Supplying of China Clay 3 as per Department Incharge 335 Supplying of China Clay 4 as per Department Incharge 336 Supplying of Petri Dish 3(Borosil) as per Department Incharge 337 Supplying of Petri Dish 4(Borosil) as per Department Incharge 338 Supplying of Distillation Set-Complete flask-500ml as per Department Incharge 339 Supplying of Distillation Set-Complete flask-1000ml as per Department Incharge 340 Supplying of Thermometer Pocket B-14 as per Department Incharge 341 Supplying of Sintered Glass Funnel-25ml as per Department Incharge 342 Supplying of Air Condenser 12 as per Department Incharge 343 Supplying of Burette Stand with Clamp as per Department Incharge 344 Supplying of Cork borer as per Department Incharge 345 Supplying of Capillary Tube for melting point as per Department Incharge 346 Supplying of Dessicators 6 as per Department Incharge 347 Supplying of Dessicators 8 as per Department Incharge 348 Supplying of Dropper with Rubber teats 6 as per Department Incharge 349 Supplying of Dropper 4(Borosilicate glass) as per Department Incharge 350 Supplying of Dropping bottle-125ml as per Department Incharge 351 Supplying of Funnel Stand as per Department Incharge 352 Supplying of Fusion Tubeas per Department Incharge 353 Supplying of Glass Rod as per Department Incharge 354 Supplying of Glass Tube as per Department Incharge 355 Supplying of Stopwatch Steel body as per Department Incharge 356 Supplying of Magnetic Stirrer as per Department Incharge 357 Supplying of Rubber Gloves as per Department Incharge 358 Supplying of Reagent as per Department Incharge 359 Supplying of Sandbath as per Department Incharge 360 Supplying of Tissue Paper(Local made) as per Department Incharge 361 Supplying of Double Beam PC Microprocessor UV-VIS Spectrophotomet erMake:Systroni cs Model: 2202 PC Based Double Beam Automatic source optimization ,Base line calibration & Cell optimization 200 - 1100 nm Range2. 0 nm Bandwidth%T. Abs. Conc . (K factor. Multi standard ). Multi component measuring modesSingle Wave length, Multi Wave length Scan (with multi scan facility). Time Scan. Kinetic scan operating modes Automatic 5 position sample changer Single Position 50 /100 mm Cuvette Holder (Optional) as per Department incharge 362 Supplying of Refrigerated Centrifuge,(Specification:Speed:- 20000 Max.,RCF:- 37570 Max.,Lowest Temp:- -8,Noise:- <-60db)as per Department incharge 363 Supplying of Refrigerated Centrifuge Essential accessories Required:. With angle Heads (with polypropylene tubes)Model- R-248M 24xl.5 ml as per Department incharge 364 Supplying of Refrigerated Centrifuge 2. Voltage stabilizer:- 03 KW Servo controlled Voltage Stabilizer, input 170 volts to 260 volts, output 220 volts to 240volts as per Department incharge 365 Supplying of PCR machine(Specification- Well block, Gradient, temp. range 4° - 99-irC, memory capacity 10000 protocols , display 7inch,volume capacity I 0- 100 μL , preloaded protocol, temperature accuracy ±0.2°C@99°C, with PCR wizard as per Department incharge 366 Supplying of SOS PAGE unit and Western Blot apparatus along with power bank -Mini-TBC electroph_oretic transfer cell, includes: Mini 01P-4 cell tank and lid with cables, buffer, Mini transfer module, gel holder cassettes, 4 fiber pads, cooling units, instructions, Western blot unit, compatible power bank as per Department incharge 367 Supplying of pH Meter With electrode(Type of PH Mater - Portable,Ph Range:0-14,Resolution-0.01pH,compensation-0 to 80 degree celsius) as per Department incharge 368 Supplying of Deep fridge(It is used to store chemicals and preserve samples at very low sub-zero temperatures or below)as per Department incharge 369 Supplying of Autoclave (Vertical)Size- 400 x 600mm ,;Capacity- 75Ltr as per Department incharge 370 Supplying of Hot air oven (Sterilization) as per Department incharge 371 Supplying of Incubator Shaker-Growth and enumeration of microbes (Broth cultures) as per Department incharge 372 Supplying of Horizontal Laminar air flow(Sterile environment Size 4X2)as per Department incharge 373 Supplying of Horizontal Agarose gel electrophoresis unit with gel caster and Power pack Separation of macromoleculeas per Department incharge 374 Supplying of Vortex mixture-To mix content of test tubes and microfuge tubes. as per Department incharge 375 Supplying of Ultrapure Water Purification System:MiliQ Water For distill wateras per Department incharge 376 Supplying of Micropipets - 0.1μL-2.5μL 0.5μL-10.0μL 10.0μL-l00μL 20.0μL-200μL l00μL-l000μL as per Department incharge 377 Supplying of Quebec Colony Counter -Count the microbial colonies as per Department incharge 378 Supplying of Light Microscope (General) 10X,20x, 45x, l00x Visualize microorganisms as per Department incharge 379 Supplying of Bifocal microscope with illuminators, Camera attachment and computer Visualize microorganisms and microgrphy as per Department incharge 380 Supplying of Magnetic stirwith Hotplate and magnetic beads To stir the liquids , preparation of solution as per Department incharge 381 Supplying of Heating mantle For heating round bottomed flask/distillation flask as per Department incharge 382 Supplying of Microwave oven To heat liquids instead of flaming. Samsung/ LG 20 Ltrs as per Department incharge 383 Supplying of Glass Dessicators Used for dessication as per Department incharge 384 Supplying of Fluorescence microscope A fluorescence microscope is an optical Microscope that uses fluorescence and phosphore scence instead of,or in addition to, reflection and absorption to study properties of organic or inorganic substances as per Department incharge 385 Supplying of Electronic Analytical Balance It is used to weigh small quantities of chemicals and samples precisely and quickly. Readability- 1 mg (0.001 g) Cap.- 420gm as per Department incharge 386 Supplying of Electronic Top pan Balance- Readability- 0.1 g Cap.- 2 kg.as per Department incharge 387 Supplying of Double Distillation Unit ,.Approx output: 2 Lit/hrs Wattage:3.3 .KW With safety Cutoff Device Water Stills are carefully designed to produce high purity pyrogen free distiiied water. The water still comprises ofborosilicates glass horizontal typeboiler, coil condenser, constant level device, silica sheathed heaters, along with stand and clamps. All parts are replaceable. pH/conductivity:6-7 / 1-2 μSiem forsingle, 6-7/0.8-lμS/cm for double distilled water as per department incharge 388 Supplying of Microtome-5286(Product Specification Minimum Setting Value-0.5 um,Object Feed-28 mm,Vertical Stroke-60 mm,Specimen Orientation X and Y Axis Universal 8 Degree Trimming Thickness Range-1 um-100 um Operation-Automatic. (Motorized Feed & sectioning and Emergency Stop Provided),Sectioning Speed-0-400 mm/sec.,Specimen-Orientation Z Axis-Upto 360 Degree,Retraction Value-Adjustable Max Specimen Size-50 x 50 mm,Section Thickness Range-0.5 um-60 um)Senior rotary microtome as per Department incharge 389 Supplying of Cryostat -(Product Specification Section Thickness Range-0.5 Micron to 100 Micron (with the increment of 0.5 Micron, 1 Micron, 2 Micron, 5 Micron) Power Supply-220v,Dimension-750mm x 750mm x 950mm (approx) Weight -123 kg (approx),Remote Control-Optional,Sectioning Mode-Single step mode/ Continuous mode Hand Wheel Control-Feather Touch Keypad/ Foot Switch/ Remote Control (optional),Sterilization-U.V-C Sterilization,Cooling down time Up to -30 DegreeC-2 Hour 30 Min Specimen Retraction setting Range-5 Micron to 100 Micron (with increment of 5 Micron),Compressor-Dual Compressor,Cryo Chamber Temp. Adjustable -1 DegreeC to -30 DegreeC Block Holder Head Temperature-Adjustable -1 DegreeC to -35 DegreeC Illumination-LED Lamp)Ultimate usico fully automatic cryostat as per Department incharge 390 Supplying of ELISA -Vet scientific(Specification-Product Specification Automation-Semi Automatic,Assays Performed-ELISAs, Immuno Assays Plate Format-96 well,Optical System Filter-based Detection Method-Absorbance,Number Of User Programs 42 Storage-100000 Results,Filter Positions-8 Display Type-Touch Screen Packaging Type-EXPORT QUALITY,Testing Speed-3 second Type Of Filter 405,450,492, 630,Power Source-115/230 V AC, 50Hz,Weight-9 Kg,Is It Portable-Non Portable, sample Type-Serum, Plasma, Urine, CSF, Whole Blood,sample Volume Range-10-100 Interface-RS232/ USB) as per Department incharge 391 Supplying of Calorimeter -A VI Digital (A VI Scientific,Frequrcy:50Hz,Voltage:230-280V,operating time per test-10 min) as per Department incharge 392 Supplying of HaemometerSahli type-Microsidd (Specification:Amber coloured glass bottle -1 No.,Glass Stirrer-1 No.,Dropper with teat -1 No.,Cleaning Brush -1 No.,Spare latex tubing one meter -1 No.Round tube haemoglobinometer) as per Department incharge 393 Supplying of Anti - theft Sticker with the University logo as per Department incharge 394 Supplying of Middleware Application Desktop(Write and Read Tags) as per Department incharge 395 Supplying of RFID Staff Station or desktop reader (Used for tagging of books and circulation {lssue/Return) operations through RFID) as per Department incharge 396 Supplying of Integration with Software and Training of Complete RFID System as per Department incharge 397 Supplying of RFIDSecurityGates (2 pedestals-1 gate) RFID Security Gate (Single Lane) as per Department incharge 398 Supplying of Automated Book drop Box as per Department incharge 399 Supplying ofCabling. Casing. Wiring , Switches as per Department incharge 400 Supplying of Freight Transportation of Miidle ware Application Desktop,RFID STAFF Station,Integration with software training,Automated Drop box ,Cabling,Casing,Wiring,Switches as per Department incharge 401 Supplying of LAN . Switches, Necessary Cabling, Casing , Power Supply port including cables as per Department incharge 402 Supplying of Dedicated serverGHZ 16 core 1P-32GB -RP408ia -NC8SFF800WPS Serverintel Xeon -G5218 Kit for DL 380 GEN-10-HPE 32GB 2RX4 PC-4 2933YR Smart kit ,HPE DL38x Gen 10-12 Gb SAS Expande,HPE DL 380Gen 10 Box 1/2 Cage Bkpin kit ,HPE 24TB SAS 12G 10K SFF SC 512eDS HDD .HPE 800 WFS Ht Plg LHPwr Sply kit,HPE 3 Year Fiundation care 24x7 DL 380 Gen 10 Serviceas per Department incharge 403 Supplying of RS 86+_TB619RS, 3GB RAM and 48 GB ROM,4K Display Android model,3 GB RAM And 48 GB ROM,slim frame,Anti Glare Glass,3M Anti glare H7 Anti touch surface hardness lightweight for easy installation,Media suits for Annotation,Software bundled with education apps,Office suits,Great writing experience,Object recognition -First pal,/Fine pen ,Touch Points-20 points under window and 10 points under android,178 degree viewing angle IR ,Touch 15000,1 contrast ratio,4 MS Response time 50000 hours life,Reduce clutter and bring efficiency for the faculty,Remote control,15 wattX2 speaker,Android 8.0,Newline cast,Display management,Newline broadcast including installation and Trainingas per Department incharge 404 Supplying of Deep Fridgeas(2 in 1 Converti Freezer & Cooler Corrosion Resistant Cooling Coil & PPGI for inner & outer body Heavy Duty Compressor & Tropicalised Design Approximately 14% Higher Net Capacity compared to competition Sleek Design with heavy duty performance) per Department Incharge 405 Supplying of Autoclave (Horizontal,Height X Dia: 450mm x 250mm Height x Dia: 18Inch x 10Inch,Capacity: 22 Ltr,Load: 2.0 KW) as per Department Incharge 406 Supplying of Autoclave (Vertical): size- 400x600mm, Capacity- 75Ltr as per Department Incharge 407 Supplying of Hot air oven(Standard double wall fabrication. Inner chamber made of highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations.Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50c to 250c + 1c controlled by capillary type thermostat.Inner Chamber Size 18x18x18 inch. made of Stainless Steel) : any Standard make as per Department Incharge 408 Supplying of Bacteriological incubator(Item Weight ‎10 kg Product Dimensions-30 x 30 x 30 cm; 10 Kilograms,Item model number-12X12,Item Height-30 Centimeters Item Width-30 Centimeters) as per Department Incharge 409 Supplying of Bacteriological shaking incubator as per Department Incharge 410 Supplying of BOD incubator as per Department Incharge 411 Supplying of Laminar air flow any Standard company as per Department Incharge 412 Supplying of Micropipettes with microtips :(1.0uL-10.0uL, 10.0uL-100uL, 100uL-1000uL, 20uL-200uL): A. Prime Variable Pipette, B. Fully Autoclaveable Variable Vol. Pipetteas per Department Incharge 413 Supplying of Colorimeters with cuvettes any Standard company as per Department Incharge 414 Supplying of Western Blot apparatus, as per Department Incharge 415 Supplying of Powerpack with wiresas per Department Incharge 416 Supplying of Homogeniser as per Department Incharge 417 Supplying of PCR machine Block Formats 96x0.2ml(A),54x0.5ml(B), 96x0.2ml +77x05ml©, 384well(D) Size(WxDxH,mm)-380x270x250 as per Department Incharge 418 Supplying of UV Transilluminator/UV chamber UV source: 365nm Wave Length Viewing area: 24x14cm Anti Slip rubber foot provided for base as per Department Incharge 419 Supplying of CO2 incubator as per Department Incharge 420 Supplying of pH meter and buffers: A.pH meter B. pH buffers as per Department Incharge 421 Supplying of Water bath (any Standard company ) as per Department Incharge 422 Supplying of Fume Hood: size- 3x3x2 wooden with Granite working area as per Department Incharge 423 Supplying of Soxlet apparatus with heating mantle and distillation set up as per Department Incharge 424 Supplying of Kjeldahl Apparatus as per Department Incharge 425 Supplying of Ultrapure Water Purification System: MiliQ water as per Department Incharge 426 Supplying of Quebee Colony Counter as per Department Incharge 427 Supplying of Light Microscope (general) 25x, 45x, 100x s as per Department Incharge 428 Supplying of Bifocal microscope with illuminators as per Department Incharge 429 Supplying of Magnetic stirrer with magnetic beads(any Standard company )as per Department Incharge 430 Supplying of Magnetic stirrer with hot plate (Remi) as per Department Incharge 431 Supplying of Heating mantleas per Department Incharge 432 Supplying of Microwave oven ((20Ltr) as per Department Incharge 433 Supplying of Glass Dessicators as per Department Incharge 434 Supplying of Computer : Core i9, 7th Gen. 20 LED Monitor, 4GB DDV, 1TB HDD, DV writer HP/Dell as per Department Incharge 435 Supplying of Culture room: Tissue culture Rack fitted with 16 tubes, 8 bulbs, 4UV & Timer as per Department Incharge 436 Supplying of Electronic Analytical Balance:- Readability- 1mg(0.001g) Cap.-420gm as per Department Incharge 437 Supplying of ElectronicTop-pan Balance:-Readability- 0.1g Cap- 2kgas per Department Incharge 438 Supplying of Electroporator:- as per Department Incharge 439 Supplying of Fermenter(7.5L)(any Standard company )as per Department Incharge 440 Supplying of Fluorescence Microscopeas per Department Incharge 441 Supplying of Hot air oven universalas per Department Incharge 442 Supplying of Distillation Unit as per Department Incharge 443 Supplying of Membrane filter assembly 5000 mlas per Department Incharge 444 Supplying of Fluorimeter as per Department Incharge 445 Supplying of Homogeniser: Remi model- RQT-127 A/D High speed homogenizer, with 1/8 HP Motor, Homogenizer Working Volume [H2O] 0.1-50ml (Dispersing shaft DS-160/5) WEIGHT 0.6KG Dimension[LxWxH] 46mmx55mmx230 operating environment 0-40degre, 85% rel. humidity as per Department Incharge 446 Supplying of ELISA reader and Microtitre plates: ELISA Wavelength range 400nm-800nm Accuracy- +-1% at 1.0OD, 450nm Dimension 450x350x197mm as per Department Incharge 447 Supplying of Liminar air flow : 4x2x2 feet, stainless steel as per Department Incharge 448 Supplying of Gel Documentationd system as per Department Incharge 449 Supplying of 5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 450 Supplying of 12V/26AH- Batteryas per Department Incharge 451 Supplying of Headphone with built in microphone (Brand) as per Department Incharge 452 Supplying of Furniture:- Computer Table & Chairs & Table- Chair for lab. Instructor and student (50 students per batch) as per Department Incharge 453 Supplying of Network:- LAN, Switches, Cabling, Casing Power Supply Port including Cables as per Department Incharge 454 Supplying of 5.5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 455 Supplying of RS86+ TT8619RS 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0, Newline Cast, Display Managemen, Newline Broadcast Including Installation and Training. as per Department Incharge 456 Supplying ofpH meter(Digital) :- pH range: 0-14, Temperature Range: 0.0 to 100 C (Manual Compensation) as per Department Incharge 457 Supplying ofNoise Level meter:- Auto/Manual ranging from 30 to 130dB in 6 ranges as per Department Incharge 458 Supplying ofWater analysis Kit:- They include; alkalinity, chloride, hardness, iron, and sulphate as per Department Incharge 459 Supplying ofHigh volume sampler:- 1)PM-2.5- Designed to meet International Standards for High volume air Sampling of PM2.5 particulates. 2)PM-10-U.S EPA FRM Designed for the determination of suspended of PM-10 particulates concentrations. (RFPS-1287-063) 3)TSP- Designed to meet U.S EPA reference method for determination of total suspended particulates(TSP) concentration as perDepartment Incharge 460 Supplying ofSoil testing kit (mrinda parikshan kit) : Use for micro and macro nutrients as per Department Incharge 461 Supplying ofSeive plate with shaker : 5mm,1mm,2mm) as per Department Incharge 462 Supplying ofUV/Visible spectrophotometer:- Spectral bandwidth 1 nm (190 to1100nm , Lamp Type 20-W halogen lamp and deuterium lamp as per Department Incharge 463 Supplying ofAutoclave : 10-15 litre Steam Sterilizer as per Department Incharge 464 Supplying ofLaminar hood (Horizantal) : Horizontal air flow cabinet, filter air blow across the work zone in horizontal direction. This constant flow of air provides material and product protection as per Department Incharge 465 Supplying ofHot plate(pic):-Temperature range: 350 C as per Department Incharge 466 Supplying ofShakeer incubator Compact Bench top shaker with temperature control range from Ambient +50C to 600C. Tray dimension : 420x420 , Speed 50-350 rpm with accuracy of +/- 2rpm as per Department Incharge 467 Supplying ofMuffle Furnaces (15x125x250)cm: Temperature upto 35C to 1400C as per Department Incharge 468 Supplying of Analytical Balances:Capacity 220gram as per Department Incharge 469 Supplying ofDigester : 1) vessel size : Dia 39 mm (Aprox.); Volume 160ml 2)Temperature : upto 200degC as per Department Incharge 470 Supplying ofDouble distilled water plant: Model- Vertical:- Distlled Water Output Capacity-2.5 Litres/Hours, Distillate water quality as per Department Incharge 471 Supplying ofOven:- Dry ovens- 30 to 1000 litre capacity. as per Department Incharge 472 Supplying of B.O.D Incubator: Volume 68 Litre as per Department Incharge 473 Supplying ofMagnus Microscope:- Magnification 4x,10x,40x, and 100x as per Department Incharge 474 Supplying ofDesiccators:- Contain: Silica Gel dimension;12x12 in (30.5x30.5 cm),Material Glass as per Department Incharge 475 Supplying ofRichter scale hardness tester Portable Rockwell/brinell vickers Hardness Testing Instrument Mold metal hardness meter display:-parameter- HRC Display Type, Digital Model Name/Number- ATedigiHR, Accuracy- 0.1 HRC Dimensions of Machine base (approx.) 150x425 mm as per Department Incharge 476 Supplying ofProctor Penetrometer: Proctor Penetrometer- Complete with set of needle points Weight, 2 kg as per Department Incharge 477 Supplying ofGas Chromatography Retention time repeatability-< 0.008% or 0.0008 min Area rpeatability -<1% RSD, using 2ng tetradecane as per Department Incharge 478 Supplying of Atomic Absorption Spectrometry(AAS):- aa-7000 SERIES OF Atomic Absorption Spectrophotometers features high- sensitivity analysis as per Department Incharge 479 Supplying ofWavelength range; 400 to710nm Wavelength selection: 8 in-built gelatin filters: 430,470,490,520,540,580,600 and 710 nm Measurement ranges; 0-100%T, 0-1.50Abs, 0.1 to 1000 Concentration. Resolution: 1%T, 0.01Abs, 0.1 to 1 Concentration as per Department Incharge 480 Supplying of Laptops(of Specification:Processor Corei5,RAM:4GB,Hard drive:500GB ,Screen size:12 inch):as per Department Incharge 481 Supplying of Desktops: i7 3rd Gen, 1TB HDD, 4GB RAM, Windos 10, MS office, Graphics card as per Department Incharge 482 Supplying of Xerox Machine(Product Specification:Functions Multi-Function:Supported Paper Size-A3,Supported OS-all,Color Output-Black & White,Number Of Trays-4,Item Color-white and blue Print Speed-up to 35 ppm,Weight 129 kg,Print Technology-Laser Warm-Up Time, As fast as 11 seconds (black and white) Duty Cycle-WorkCentre 5335: Up to 150,000 pages / month Resolution-200 x 1200 dpi) as per Department Incharge 483 Supplying of Air Conditioning:-1.5 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 484 Supplying of Luminous Cruze 3.5KVA Inverter with RC 18000 Battery (4 Batteries) as per Department Incharge 485 Supplying of Projector(Special Feature-portable,Connectivity Technology,Bluetooth, Wi-Fi, USB, HDMI,Display resolution 1920 x 1080,Display Type-LED) as per Department Incharge 486 Supplying of Godrej Lecture Hall Furniture as per Department Incharge 487 Supplying of Electronic Podium(Speaker type-Tweeter,Auxillary,wireless,floor standing) as per Department Incharge 488 Supplying of Smart board (Screen size-11 inches,Connecting technology-Wifi,Multimedia)as per Department Incharge 489 Supplying of Black board( Melamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS CornersMelamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS Corners) as per Department Incharge 490 Supplying of Glassware rack as per Department Incharge 491 Supplying of installation of Air conditioner,Luminous Cruze,Projector,Lecture Hall Furniture,Electronic podium,Smart board and black board as per Department Incharge 492 Supplying of Inductively coupled Plasma - Optical Emission Spectrometer with CID detector technology for multi-element analysis of geological petrogical etc. samples in ppb level as per Department Incharge 493 Supplying of Suppressed ion analysis system for anion and cation analysis in water, wastewater, environmental samples and also upgradable to combustion for determination of corrosive halogens and sulfur in Petrochemicals, gaseous samples, solid samples, and complex samples as per Department Incharge 494 Supplying of CHNS/O for the analysis of Carbon, Hydrogen, Nitrogen, Sulfur and Carbon in organic matrices, soil, feed , plant samples, petroleum products, Coal, Coke, Biomass & Liquid Fuels as per Department Incharge 495 Supplying of Gas Analyzers for hydrocarbon and permanent gas analysis as per Department Incharge 496 Supplying of Benchotop XRD as per Department Incharge 497 Supplying of XRF Spectrometer as per Department Incharge 498 Supplying of Refrigereted Centifuge MakE-REMI, Model-C24 PLUS :- Max. Speed:20000, Max. RCF:3757, Max. Lowest Temp.:8, Noise:60db. Essential accessories Required: 01. Withangle Heads (with polypropulene tubes) Model-R-248M24x1.5ml 2)Voltage stabilizer:-03KW Servocontrolled Voltage Stabilizer, input 170volts to 260volts, output 220 to 240volts as per Department Incharge 499 Supplying of pH Meter compatible poer bank Make: REMI :- With eletrode as per Department Incharge 500 Supplying of Bench top Centrifuge Make: Tarson, : - SPINWIN MC-001 6 places Rotor for 1.5 ml tubeas per Department Incharge 501 Supplying of Deep Fridge: It is used to store chemicals and preserve samples at very low sub-zero tempertures or below as per Department Incharge 502 Supplying of Autoclave(Vertical) : size- 400x600mm capacity- 75Ltr as per Department Incharge 503 Supplying of Hot air oven : Sterilization as per Department Incharge 504 Supplying of Incubator Shaker: Growth and enumeration of microbes(Broth Cultures) as per Department Incharge 505 Supplying of Horizontal Laminar air flow:- Sterile environment size 4x2as per Department Incharge 506 Supplying of Ultrapure Water Purification System: MiliQ Water : for distil water as per Department Incharge 507 Supplying of Micropipets (Ependroff): 0.1uL-2.5uL, 0.5uL-10uL, 10.0uL-100uL, 100uL-1000uL each oo these 1pcs as per Department Incharge 508 Supplying of Light Microscope (general)10X, 20X, 45X, 100X, : Visualize microorganisms as per Department Incharge 509 Supplying of Bifocalcal Microscope with illuminators, Camera Attachment and comput: Visuallize microorganisms and micrography as per Department Incharge 510 Supplying of Magnetic stir with Hotplate and magnetic bead as per Department Incharge 511 Supplying of Heatingmant; for heatinground bottomed flask/distillation flask as per Department Incharge 512 Supplying of Microwave oven: To heat liquids instead of flaming. 20Ltrs as per Department Incharge 513 Supplying of kydroPro 100 handeld multiparameter water quality analiser: Turbedityas per Department Incharge 514 Supplying of Petrological Microscope: Study of Optical minrology as per Department Incharge 515 Supplying of Ore petrological microscope: Study of ore petrology as per Department Incharge 516 Supplying of Miscellaneous instruments as per Department Incharge 517 Supplying of glassware as per Department Incharge 518 Supplying of chemical as per Department Incharge 519 Supplying of Arc GIS(Latest) as per Department Incharge 520 Supplying of GCD Toolkits as per Department Incharge 521 Supplying of SURPAC Software as per Department Incharge 522 Supplying of Intergraph Edu Kit [GIS+RS] Version 2020 or latest(Software content as per list), 5 users for Erdas imagine Professional and 5 users for Geomedia professional Software as per Department Incharge 523 Supplying of Interactive Flat Panel as per Department Incharge 524 Supplying of 2 Virtual Class Room including capture, recording and streaming online, 1 Servers one per 05 classrooms per Department Incharge 525 Supplying of N-computing for smart classrooms including servers and clients as per Department Incharge 526 Supplying of Tagging of documents(books/hard-bound journals/CDs/technical films etc)in RFID Technology as per Department Incharge 527 Supplying of Sofwares, Server Machines, Air-Conditioning Systems,Xerox Machines, Lamination Machines, Binding Machines, Furniture/Furnishing, Computers, Printers etc as per Department Incharge 528 Supplying of Digital Podium, PTGN 500, Window & 1 LCD, Elecronic Lectern, on site OEM. Warranty 3years, 3GB RAM,4GB ROM as per Department Incharge 529 Supplying of Air Conditioning:-1.8 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 530 Supplying of Black/ White,Printer:- scan-copy all in printer- Branded as per Department Incharge 531 Supplying of CCTV set for floor: 55 LRD display for CCTV. CCTV Camera-1 P based CCTV camera 2TB space with NVR with necessary accessories as per Department Incharge 532 Supplying of 5KVA Inverter online UPS with battery backup 100Mah battery(8 units) as per Department Incharge 533 Supplying of Electrophoresis Apparatus as per Department Incharge 534 Supplying of Bacteriological Incubator as per Department Incharge 535 Supplying of Autoclave as per Department Incharge 536 Supplying of Centrifuge as per Department Incharge 537 Supplying of Rotar Head as per Department Incharge 538 Supplying of Rotar Head 25 as per Department Incharge 539 Supplying of Gel documentation system as per Department Incharge 540 Supplying of Spectrophotometers as per Department Incharge 541 Supplying of compoud Microscope as per Department Incharge 542 Supplying of Trinocular Microscope with camera as per Department Incharge 543 Supplying of Semi-Automated Microtonne as per Department Incharge 544 Supplying of DNA Sequencer as per Department Incharge 545 Supplying of Spectrophotometer as per Department Incharge 546 Supplying of Laminar air flow chamber as per Department Incharge 547 Supplying of Tissue culture rack as per Department Incharge 548 Supplying of PCR Apparatus as per Department Incharge 549 Supplying of Liquid nitrogen cylinder as per Department Incharge 550 Supplying of TLC apparatus kit as per Department Incharge 551 Supplying of TLC Visualizer/documentation as per Department Incharge 552 Supplying of HPLC System as per Department Incharge 553 Supplying of Scientific vortex mixer as per Department Incharge 554 Supplying of Soil Thermometer as per Department Incharge 555 Supplying of Scientific Digital Balance as per Department Incharge 556 Supplying Equipments for workshop,Seminar & Excrusion as per Department Incharge 557 Supplying Equipments for Non-Recurring(Research Equipment) as per Department Incharge 558 Supplying Equipments for Recurring(Chemical & Glassware) as per Department Incharge 559 Supplying of Furniture Bookshelves, Study Tables and Chairs for Readers as per Department Incharge 560 Supplying of Desktop i5 Processor, 7th Generations, 500GB HDD, 4GB RAM, 23.8 inch, LED backlit Monitor Full HD IPS Panel (Brand: HP/DELL) as per Department Incharge 561 Supplying of Headphone with built in microphoneas per Department Incharge 562 Supplying of Printer with scanner (Laser,Colour/B/W)as per Department Incharge 563 Supplying of Scanner(USB,25.2D x 36.8W x 4.3H Centimeters,Slide) as per Department Incharge 564 Supplying of Xerox Machine:- (,Platen cover & Toner, Resolution (DPI):1200 X 1200dpi, Duty Cycle:1.3 Sec) as per Department Incharge 565 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-500mm,Laminating speed-1200mm)as per Department Incharge 566 Supplying of CCTV Camera(Full HD Picture,AI Powered Motion Detection,Infrared Night Vision; 360° Panorama,Talk Back Feature (2-Way Audio)Material Type: Plastic; Included Components: Camera, Power Adapter, Charging Cable, Wall Mounting Kit, User Manual; Specific Uses For Product: Surveillance) as per Department Incharge 567 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 568 Supplying of RS75+ TT7519RS RS 75+ comes with 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management. as per Department Incharge 569 Supplying of Wall Mount Kit(Material: SS,Max loading capacity-60 to 100kg) as per Department Incharge 570 Supplying of Live streaming software Software Software for Live Streaming or Live telecast as per Department Incharge 571 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 572 Supplying of Frieght Transportation of 4K Display,Wall mount kit,Live Streaming software as per Department Incharge 573 Supplying of cctv solutions for Department with 20 cameras(Image Sensor Type-CMOS,Image Sensor Size-0.357 inch,Camera Image Sensing capacity (Picture Mode)-2MP,Resolution-Full HD (1920 x 1080 Pixel)-Day/Night Capable-Yes,IR illumination Range(mtr) 200 Type of Camera HousingDOME CAMERA,IP Camera Yes) as per Department Incharge 574 Supplying of installation and commisioning of CCTV and other computer equipment as per Department Incharge 575 Supplying of 55 Tv for seeing all cctv in HOD room as per Department Incharge 576 Supplying of8 PORT EPBX as per Department Incharge 577 Supplying ofTELEPHONE as per Department Incharge 578 Supplying ofWIRE as per Department Incharge 579 Supplying of CRON BOX as per Department Incharge 580 Supplying ofSWITCHES FOR PORTS as per Department Incharge 581 Supplying of Workststion Table, Chairs, Desktop, UPS as per Department Incharge 582 Supplying of LAN, Switches, Necessary Cabling, Casing Power Supply Port including Cables as per Department Incharge 583 Supplying of Refrigerator(Storage & Interior Description : | Cooling Type ; Frost Free | Display Type ; Thermostat | Shelf Material ; Toughened Glass | Compressor Type ; Reciprocatory)as per Department Incharge 584 Supplying of Microwave(Special Features: Quartz Heater - Concealed Heating. Safer Cooking, Stainless Steel Cavity - More Hygienic. More Durable, Child Lock - Ensures complete safety especially for homes with young children, Interior light)as per Department Incharge 585 Supplying of Washing Machine( Fully automatic 6 kg) as per Department Incharge 586 Supplying of Sewing Machine(Motorised)as per Department Incharge 587 Supplying of Weighting Machineas per Department Incharge 588 Supplying of Blood Pressure Monitor as per Department Incharge 589 Supplying of Oximeter as per Department Incharge 590 Supplying of Gluco Meter as per Department Incharge 591 Supplying of Test Tube & Breakers as per Department Incharge 592 Supplying of RO Water Purifier as per Department Incharge 593 Supplying of Microscope(Student) as per Department Incharge 594 Supplying of Crockery Set as per Department Incharge 595 Supplying of Cocking Utensils set as per Department Incharge 596 Supplying of Cutlery Set as per Department Incharge 597 Supplying of Sofa Set + Centre Table as per Department Incharge 598 Supplying of A.C (Split 2 Ton,3 Star,Twin invertor HD Compressor)as per Department Incharge 599 Supplying of Stabilizer(Automatic Voltage Stabilizer,37.4 x 27.1 x 19.8 Centimeters,5 kg 700 g)as per Department Incharge 600 Supplying of Inveter with battery(Capacity -100AH,Battery Type-Tubular Battery,Warranty-1 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 1 FAN ,28 Light , 8 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 601 Supplying of Desktop Computer with UPS and Computer Tableas per Department Incharge 602 Supplying of Original operating system software window 10 with Antivirus as per Department Incharge 603 Supplying of Printer with scanner (inkjet,Colour/B/W)as per Department Incharge 604 Supplying of Dining Table Set as per Department Incharge 605 Supplying of Camera as per Department Incharge 606 Supplying of Mixer Grinder as per Department Incharge 607 Supplying of Iron as per Department Incharge 608 Supplying of Wall Clockas per Department Incharge 609 Supplying of Whole tailoring Equipments (Local) as per Department Incharge 610 Supplying of Knitting Equipments(Local) as per Department Incharge 611 Supplying of Flower Arrangement Equipments) (local) as per Department Incharge 612 Supplying of Aluminium Set as per Department Incharge 613 Supplying of Plastic Tub as per Department Incharge 614 Supplying of Dustbin(Big) as per Department Incharge 615 Supplying of Basket &Mug as per Department Incharge 616 Supplying of White Table Cloth(Big size)as per Department Incharge 617 Supplying of Wash Basin(Local)as per Department Incharge 618 Supplying of Gas Stove +Cylinderas per Department Incharge 619 Supplying of Curtains(Local) as per Department Incharge 620 Supplying of Floor Mats (Local) as per Department Incharge 621 Supplying of Tube Lightas per Department Incharge 622 Supplying of Fan as per Department Incharge 623 Supplying of Led Projector(New Edition)as per Department Incharge 624 Supplying of Smart Board(specification:white,power consumption<150w ,usage-school,Effective touch-65x46) as per Department Incharge 625 Supplying of Decorative Items(Local) as per Department Incharge 626 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 60 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 15000 ppm,Features-Two-sided printing,Weight-25kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scanner multi as per Department Incharge 627 Supplying of Ceiling Fanas per Department Incharge 628 Supplying of Exhaust Fan as per Department Incharge 629 Supplying of Pedestal Fan as per Department Incharge 630 Supplying of Inveter with battery(Capacity -200AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 14 Hrs Backup- 4 FAN , 8 Light , 14 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 631 Supplying of Wooden Stool(Local) as per Department Incharge 632 Supplying of Wash Basin (Local) as per Department Incharge 633 Supplying of Register (Local) as per Department Incharge 634 Supplying of Stabilizer for ACas per Department Incharge 635 Supplying of Tubelightas per Department Incharge 636 Supplying of Dustbin (Local) as per Department Incharge 637 Supplying of Curtains (Window and Door) (Local)as per Department Incharge 638 Supplying of Door Mat(Local) as per Department Incharge 639 Supplying of Broadband(Wifi)as per Department Incharge 640 Supplying of Furniture Bookshelves, Study Tables and Chairs for attendant and students (30 students at a time) as per Department Incharge 641 Supplying of Wireless mic as per Department Incharge 642 Supplying of Weight Box(100g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 643 Supplying of Weight Box(50g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 644 Supplying of Kymograph :-with smoked paper, smoked Drum, Time marker as per Department Incharge 645 Supplying of Memory Drum :- Electrical operated as per Department Incharge 646 Supplying of Memory Drum :- Hand operated as per Department Incharge 647 Supplying of Metronome :- Mechanical as per Department Incharge 648 Supplying of Porteuz Maze Test as per Department Incharge 649 Supplying of Techisto-scope :- Fall Drop type as per Department Incharge 650 Supplying of Techisto-scope :-Electronic as per Department Incharge 651 Supplying of Verniers chronoscope :- Pendulum Type as per Department Incharge 652 Supplying of Ergograph/Smoke drum /smoke paper varshing tray and varnish :- Hand grip model as per Department Incharge 653 Supplying of Weight 6Kg as per Department Incharge 654 Supplying of Multiplication sheets(100sheet) as per Department Incharge 655 Supplying of Screen:- Wooden as per Department Incharge 656 Supplying of Ravens Progressive Matrices as per Department Incharge 657 Supplying of Weschlers Intelligence scale (Adult) as per Department Incharge 658 Supplying of Cattles 16 PF Questionnaire as per Department Incharge 659 Supplying of Jungs Word Association Test as per Department Incharge 660 Supplying of Thematics Apperception Test as per Department Incharge 661 Supplying of Zeigarnik Effect Test as per Department Incharge 662 Supplying of The Occupational Stress Index(OSI) Scale by A.K Shrivastawa and A.P. Singh as per Department Incharge 663 Supplying of Rorschach Test as per Department Incharge 664 Supplying of Coping Strategies Test by A.K. Shrivastava as per Department Incharge 665 Supplying of Job Satisfaction scale(JSS) by Amar Singh and T.R. Sharma as per Department Incharge 666 Supplying of Job Involvement Scale by A.K. Singh and R. Kapoor as per Department Incharge. 667 Supplying ofOrganizational Climate Scale by Somnath Chatopadhya and K.G. Agarwal as per Department Incharge 668 Supplying of Managerial Aptitude Scale(MAS) by Santosh Dhar, Upinder Dhar and Priyanka Sharma as per Department Incharge 669 Supplying of Employees Motivational Scale by A.K. Shrivastava as per Department Incharge 670 Supplying of Employees Mental Health Inventory (EMHI) by Jagdish as per Department Incharge 671 Supplying of Beck Depression Inventory by Arron Beck as per Department Incharge 672 Supplying of Aggration Scale (AS) by G.P. Mathur and Rajkumar Bhatnagar as per Department Incharge 673 Supplying of Ego Strength Scale by Q. Hassan as per Department Incharge 674 Supplying of Bells Adjustment Iventory by S.M. Mohsin and Shamshad as per Department Incharge 675 Supplying of Marital Adjustment Questionnaire by P. Kumar and kanchan Rohtagi as per Department Incharge 676 Supplying of Sacks Sentence Completion Test as per Department Incharge 677 Supplying of PGI Health Questionnaire N-1 (PGIHQN) by S.K. Verma, N.N. Wig and D. Prasad as per Department Incharge 678 Supplying of Rotters Locus of Control Scal by Anand Kumar and S.N Srivastava as per Department Incharge 679 Supplying of Self Concept Inventory by O.N Srivastava as per Department Incharge 680 Supplying of PGI Social Support Scale by S.K. Verma, P. Kulhara and Ritu Nehraas per Department Incharge 681 Supplying of Emotiobnal Maturity Scale(EMS) by R.R. Trtipathi as per Department Incharge 682 Supplying of Life satisfaction Scale(LSS) by Q.G. Alam and R. Srivastava as per Department Incharge 683 Supplying of PGI Quality of Life Scale by S.K Verma and A.C. Moudgil as per Department Incharge 684 Supplying of Environmental Awareness Scale (EAS) by Haseen Taj as per Department Incharge 685 Supplying of Jatota Test of Group Mental ability as per Department Incharge 686 Supplying of Weinsteins Noise Sensitivy Scale (WNSS)(Shore Samvedi Mapak) by P. Bhatia, S. Mohar and I.S Mohar as per Department Incharge 687 Supplying of State Traight Anxiety Test (STAT) as per Department Incharge 688 Supplying of Xerox Machines (Digital)(Product Specification:Copy | Print | Scan | Fax,Number Of Trays-2,Item Color-Black,Duty Cycle-20000,Print Technology-LaserPrint Speed-25 Paper Per Minute ) as per Department Incharge 689 Supplying of Binding Machine (Product Specification:Capacity-12-15 Sheets,Binding Style-Manual ,Max Binding Thickness<20 mm Max Binding Sheet Width 200-300 mm,Automatic Grade-Semi-Automatic,Weight-5.8Kgs Approx.,Dimension-375x230x150mm Approx.Automation Grade,Hole Size-3x8mm,Paper Size-A4 /Letter /A5 etc,Packaging Weight-375 mm,Handle Type-metal,Packaging Size-375x230x150mm Approx.Adjustable Margin-2.5/4.5/6.5mm,Usage/Application-Comb Binding Method Of Operation-Manual,No Of Punch Holes-21 holes Number Of Punch Slots-21 holes,Size-A4,Number Of Punch Holes-21 holes,Machine Dimension-375x230x150mm Approx.Is It Padded)as per Department Incharge 690 Supplying of Printers(Ink End Sensor-yes,paper storage capacity-100 sheets Paper Input, 50 sheets Paper Output-printing technology ink tank,connecter type-Wi-Fi, USB,special feature-Cost per print - 9 paise (Black & White), 33 paise (Colour) as per Department Incharge 691 Supplying of Furnishing (Book shelves:Study table and chair)as per Department Incharge 692 Supplying of Book Case(for Psychological Tests) as per Department Incharge 693 Supplying of Open Racks as per Department Incharge 694 Supplying of Inveter with battery(Capacity -150AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 2 FAN , 2 Light , 12 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 695 Supplying of Inverter with Battery(Capacity-150,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit Backup Time-5hrs,Battery Condition-New)as per Department Incharge 696 Supplying of Desktop(Product Specification:Hard Drive Capacity-320GB,Operating System-Window,Screen Size-17 inch Processor-i5,Display Type LCD Processor) as per Department Incharge 697 Supplying of Tally sofware (Multi User) as per Department Incharge 698 Supplying of Barcode Machine(Product Specification:Type-Thermal Printers,Max Printing Size-10 IPS,Resolution (dpi)-203dpi Model/Type-Citizen CLS-700,Automatic Grade-Fully Automatic Print Line-1~3 Lines) as per Department Incharge 699 Supplying of Server Machines(Product Specification:Memory-1x16 GB RAM/ Open Bay- 2.5 Hot Swap SAS/ SATA,Power Supply 220 V,Networking Type-LAN,Number Of Ports/Channels-8 USB Port-Yes Processor Speed Intel Xeon Silver 4114 (Deca Core) 2.2GHz Power Consumption 750 W) as per Department Incharge 700 Supplying of LAN connection between 7 computers as per Department Incharge 701 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 30 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 10000 ppm,Features-Two-sided printing,Weight-16.8kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scannercannon image Class MF641CW multi as per Department Incharge 702 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-330mm,Laminating speed-600mm)as per Department Incharge 703 Supplying of Binding Machine (Punches-43 holes,Hole distance-43 holes in A 11 SHEET,Binding sizes:Max 11) as per Department Incharge 704 Supplying of Computers (Processor -AMD Ryzen 3,RAM-8GB,HDD-512 GB,screen size-19.5 inches,Operating system:Windows 11 )as per Department Incharge 705 Supplying of Office Computer (Processor:i5 10th,HDD:1 TB,RAM-4 GB,GT730 4GB Graphics) as per Department Incharge 706 Supplying oflaser printer(Product Specification:Color Output-Black & White,Function-Print | Scan | Copy,Max. Print Speed (Black)-18 ppm Max. Print Speed (Color)-17 ppm,Connectivity-Ethernet,Paper Size-A4,Print Volume-Up to 500 pages/month) as per Department Incharge 707 Supplying of Smart class Board(Power consumption:220-300V,size/Dimension-65,Input type-finger Touch) per Department Incharge 708 Supplying of Double battery(capacity-250Ah,Over current protection) Inverter(Back up time-5 hrs) as per Department Incharge 709 Supplying of Desktop Computers :- HP 23.8-inch FHD All in One Desktop with Alexa Built-in(10th Gen Intel Core i3- 1005G1/8GB/512 GB SSD/Windows 10/MS Office 2019/Natural Silver), 24-dp0816in as per Department Incharge 710 Supplying of Printer, ScannerMulti-Function Direct Wireless Network Laser Printer (Print, copy, scan, Black) as per Department Incharge 711 Supplying of Networking (LAN, leased lines, wi-fi, switches etc.) TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200Mbps Wi-Fi Speed, 5 Gigabit Ports, 4 External Antennas and 1 Internal Antenna WiFi Coverage with Access as per Department Incharge 712 Supplying of Back up support(UPS, Generator, Transformer):-600VA UPS for Desktop/PC/Computers(not for Routers) with Automatic Voltage Regulation as per Department Incharge 713 Supplying of Xerox Machine:- (IR2004 With Duplex, Platen cover & Toner, Resolution (DPI):600 X 600dpi, Duty Cycle:4.3 Sec) as per Department Incharge 714 Supplying of IBM SPSS(Statistics Package Latest Version) as per Department Incharge 715 Supplying of Nvovo(Package) as per Department Incharge 716 Supplying of LCD Projector:- 1)Project movies,images or data from your devices,most effective in dark settings 2)Projector, Lens Cover/Stand, Carrying Pounch, USB Cable 3) Connect via Wi-Fi to Android smartphones and tables or connect HDMI to iPhone or iPad as per Department Incharge 717 Supplying of Projector Screen:- 1)10 Feet x 6 Feet, 133 Dia, 16:9 Format, UHD-3D-4K 2)Comes with FULL HD 1080P 3D and 4K Viewing Technology, Anti UV coating as per Department Incharge 718 Supplying of DTH connection:- 1)HD Set Top Box 2)Recording facility as per Department Incharge 719 Supplying of Television Set:- 1) Smart LED TV-42 inches 2)4K UHD (Resolution:3840x2160) 3)Connectivity-Input:3*HDMI,3*USB 4)Audio:20W output 5) 4K HDR provides exceptional clarity 6)Smartphone connectivity : Photo sharing plus, screen mirroring as per Department Incharge 720 Supplying of as per Desktop:- Intel i7, 8th Gen, 4GB N-Vidia Geforce Graphics card, 16 GB RAM, Monitor, CPU, Mouse, key board partment Incharge 721 Supplying of Multifunction Laser Printer,Scanner, and Copier :- Functionality: Print, Scan,Copy Print Technology : Monochrome Laser Connectivity: Hi-speed USB, Compatible with USB 2.0 Specifications4as per Department Incharge 722 Supplying of Speaker 7.1 surround stereo(Power -100W,Play tme-11 hours,Voice Range-9m) as per Department Incharge 723 Supplying of Digital SLR Camera: 1)EOS full HD movie mode with movie service 2)18 megapixel CMOS)APS-(sensor 3)14-bit A/D conversion 4)ISO 100-12800)EXPANDABLE TO h:25600(5)Dual Lens camera 55-250mm IS II lens 6) Camera battery charger and bag 7)Wide strap USB cable, software CD. as per Department Incharge 724 Supplying of 24.2MP DigitalSLR Camera:- 1)100% Viewfinder Coverage 2)CMOS sensor with impressive high-resolution result 3)Camera battery, charger, and bag 4)Wide strap USB cable, software CD, manual as per Department Incharge 725 Supplying of Quark express as per Department Incharge 726 Supplying of Adobe Suite(CS6 Master Collection) as per Department Incharge 727 Supplying of Cool Edit Pro as per Department Incharge 728 Supplying of Turnitin as per Department Incharge 729 Supplying of Sound Forge as per Department Incharge 730 Supplying of 18-55mm normal lens as per Department Incharge 731 Supplying of 55-250mm Zoom lens as per Department Incharge 732 Supplying of 18-135mm lens as per Department Incharge 733 Supplying of 35mm prime lens as per Department Incharge 734 Supplying of 80mm macro lensas per Department Incharge 735 Supplying of Tripods as per Department Incharge 736 Supplying of DSLR:- 1)Powered by NP-F570 InfoLithium rechargeble battery pack 2)Records to MiniDV tape stock 3)16:9 widescreen recording 4)3CCD video camera 5)12x optical zoom lens 6)Records to MiniDV tape stock as per Department Incharge 737 Supplying of:- 1)3CCD video camera 2) Crystal Engine 3)Shoulder -Type Design 3)One Touch Navigation 4)Manual Focus Ring 5) 0 lux colour light view 6)10x optical zoom 6)500x digital zoom 7)Super image stabilizer 8) DV IN/OUT Terminal 8)5-mode programme AE: sports, portrait, low light, spot light, and surf &snow 9)SP/I.P recording 10)Back light compensation 11) Cinema mode )16:9 aspect ratio( 12)Infra-red remote controller as per Department Incharge 738 Supplying of Tripods:- 1)3-way head with adjustable pan 2)Steady rubberized legs 3)Multipurpose head with quick release 4)Multipupose head for DV cameras 5)Made from High Grade Aliminium Alloy 6)Quik flip leg locks 7)Fluid pan&tilt movement 8)Quik release plate& Bubble Level as per Department Incharge 739 Supplying of i-Mac(Product Specification,Storage Capacity-256 GB Display-24 inch,Memory Size-256gb ssd,assembled Product Dimensions L X W X H,461 mm x 547 mm x 130 mm, 4.48 kg Color-Silver & Blue,Graphics-8_core GPU,Video Support And Camera 4.5K,Bluetooth-Bluetooth 5.0,Weight-4.48kg,Operating System-macOS Big Sur,Processor- M1Echip,Line Voltage-100-240V AC) for Video Editing as per Department Incharge 740 Supplying of Photographic Design Flash Bender-Small Reflector:- 1) Make a bounce flash reflector, gobo, or snoot 2)Packs flat/great for travel 3)Attaches quickly & securely 4)Adjustable to fit all popular brands of accessory flash 5)For on-camera or off-camera flash as per Department Incharge 741 Supplying of Rim Collapsible softbox Diffuser with Rim :-1)Softbox 36 inches/90 Centimeters with Grey Rim and Bowens Mount, Portable and Quick Folding Softbox Diffuser for Photography Speedlites Flash Monolight 2)for 660 LED Panel-Outer 16.3x6.5 inches,Inner 9.8x8.7 inches Collapsible Light Reflector 3)with Stap Attachment and Carrying Bag for Photo Studio Portrait Video Shooting as per Department Incharge 742 Supplying of Handheld Camera Stabilizer with Quik Release for DSLR:- 1)Light weight, handheld video image stabilization 2)FlyCam 3000 video cam stabilizer accepts camera upto 3.5kg/7.7Ibs. 3)Easy attach a small LCD monitor with Flycam 3000 cam stabilizer when needed. 4)Precision Aluminum made 5)23 tall and just 207 Ibs without counter balance disc. as per Department Incharge 743 Supplying of Green/Blue matte screen )Chroma key( :- 1)8x12 ft Blackboard, perfect for television, video production and digital photography. 2)Rod pocket on each top edge allows to be draped or hung. 3)Finishing along all edges to prevent tears. 4)Made of 100 %pure cotton, good vertical sense and durable as per Department Incharge 744 Supplying of Professional Grade Backdrop Cum Light Stand of 8 Feet Height:- 1)Photography Backdrop Stand Kit. 2)Stand of 8 Feet Height 3)8x12 ft Blackboard, perfect for television, video production and digital photography. 4) Package Contents; 1Pcs White Backdrop , 1Pcs Black Backdrop and Set of Black Backdrop stand. 5)Bag to carry as per Department Incharge 745 Supplying of Video Mixer (Four Channel Digital Video Mixer With Effects, including installation and training):- 1) four channel video mixer by incorportating HDMI inputs/outputs, USB streaming, HDCP support, built-in touch multi-viewer, and audio embedding . 2)(3Input)SD HDMI/Composite +(1Input) Up to1080p HDMI/RGB/Component/Composite. 3) PGM Output) Up to 1080p HDMI + RGB/Component +Composite +(PVW Output)PVW/Multiviewer(. 4)480p/576p Progressive internal processing 5.) Built-in multi-viewer ith touch control 6). Built-in frame synchronizers on all inputs 7). Scalers on CH 4 and Output 8). 259 Transitions 148 Effects 9). HDCP Compliant 10) Audio Embedding 11) Audio Mixer & Delay -up to 4 Fframes 12) USB Streaming Out for web-streaming 13) Video Processing:4:2:2 )Y/b/Pr(8 bits)Internal Processing :480/59.94p when set to NTSC, 576/50p when set to PAL( 14) Input Formats :HDMIVideo: INPUT 1 to3 : reqyires 720x480/59.94p )when set to NTSC( 576/50p ) When set to PAL(15) Input Formats : HDMI and Component Video : INPUT 4:480/59.94p, 720/59.94p, 1080/59.94i, 1080/59.94p )when set to NTSC (576/50i, 576/50p, 720/50p, 1080/50i, 1080/50p )when set PAL( as per Department Incharge 746 Supplying of Studio Condenser Microphone :- 1)Professional, large-diaphragm condenser microphone for unsurpassed audio quality 2) Idea as Mian and support microphone for studio and live applications. 3) Cardioid pickup pattern for outstanding sound source separation and feedback rejection 4)Pressure-gradient transducer with shock-mounted capsule. 5)Ultra-low noise, transformerless FET inputeliminates low-frequency distortion. 6) LED indicates phantom power operation. 7)Swivel stand mount and transport case included. 8)Ultra-rugged construction with metal die-cast body 8)Gold-plated 3-pin XLR output connector for highest signal integrityas per Department Incharge 747 Supplying of Digital Monitor/Speaker System(in Pair) :- 1)Two-way active monitor system for multimedia workstations and keyboard monitoring 2)High-power woofers and tweeters powered provided a linear frequency response 3)optical and coaxial inputs to directly connect digital audio sources via S/PDIF interface 4)Two stereo analogue inputs featuring 1/8 TRS and stereo RCA connectors can be used simultaneously or mixed with a digital stereo source 5)Features 1/4 TRS headphone connector with auto-mute function easily accessible from the front panel 6)2x Stereo Anaog Inputs )TRS and Stereo RCA Connectors( 7) 1/4-inch TRS headphone connector with Auto-mute Loudspeaker Function 8)1/8-inch TRS and Stereo RCA connectors as per Department Incharge 748 Supplying of Lapel Clip-on Microphone for DSLRs Camcorders Video Cameras and Iphone Smart Phone :- 1)Omni directional lavalier microphone, designed for Smartphones, DSLR, Camcorders, Audio recorders PC etc, perfect for video use. 2) With Omni pickup pattern, for full 360A coverage, 3) minimum 6-meter )20(cable with 3.5mm 4-pole gold plug for smarty phone connection as per Department Incharge 749 Supplying of Micophone Stand:- Steel stands for hand held microphones in studio with a base supporting system as per Department Incharge 750 Supplying of MP3 Digital Voice IC Recorder LCD :- 1)Digital Voice IC Recorder 2)LCD Screen 3) 23hrs life with 4GB Memory as per Department Incharge
Contract Date: Jun 17, 2026 Contract Value : ₹ 78.07 Crore
Government Departments No of Bidders 9
Jharkhand View Result →
16.
Educational and Research Institute #10160062 Price Bid
Name Of Work: Notice Inviting E-Tender For Procurement Of Equipment, Instrument, Machineries, Tools Etc. Related To Laboratories Of Civil Engineering, Electrical Engineering, Mechanical Engineering And Physics Laboratory Of Raipur Govt. Poytechnic, West Bengal. - 1 Compacting Factor Test Apparatus 2 Core Cutter Testing Apparatus 3 Digital Schmidst Rebound Hammer 4 Ultrasonic Pulse Velocity Test Apparatus 5 Rebar Locator 6 Piezometer Tube 7 U-Tube Manometer 8 U-Tube Differential Manometer 9 Current Meter 10 C.O.D Analyzer Kit 11 Plane Table With Tripod Stand With Accessories 12 Plotter Machine 13 All Geared Head Lathe Machine With All Standard Accessories 14 Cone Pulley- Back Gear Type Centre Lathe With All Standard Accessories 15 Radial Drill Machine 16 Arc Welding Equipment : Arc Welding Cable 17 Arc Welding Equipment : Arc Welding Holder 18 Arc Welding Equipment : Arc Welding Electrode 19 Arc Welding Equipment : Safety Welding Helmet 20 Arc Welding Equipment : Safety Glasses 21 Arc Welding Equipment : Chipping Hammer 22 Double Wheeled Bench Grinder ( For M / C Shop , Fitting & Welding Shop ) 23 Abrasive Cut Off Machine 24 Inductive Load Box 25 Digital Multimeter 26 Panel Mounted Ammeter 27 Table Top Ammeter 28 Extension Board ( Spike Guard ) 29 Single Phase Preventer 30 Transformer Oil 31 Contactor Block 32 Panel Mounted Digital Timer 33 Ferule Type Fuse 34 Arduino Project Kit 35 Contact Type Tachometer 36 Xlpe Cable ( Red ) 37 Xlpe Cable ( Yellow ) 38 Xlpe Cable ( Blue ) 39 Xlpe Cable ( Black ) 40 Xlpe Cable ( Green ) 41 To Measure Unknown Capacitance By Schering Bridge 42 Dc Power Supply 43 Cable Crimping Tool 44 Different Types Of Cable Lugs 45 3 Phase Variac 46 3 Phase Synchroscope 47 Different Pilot Devices: Push Button Switch ( No, Nc ) , Limit Switch, Selector Swich, Pressure Switch, Float Switch, Toggle Switch, Ryb Indicators, Emergency Stop Switch 48 Capacitor Bank 49 Different Types Of Power Insulator Used In Transmission And Distribution Line 50 Model Of Supply System Of 6.6 Kv / 400 V Substation To Housing Complex 51 Model Of Different Types Of Excitation System For Alternator 52 Pv System Used In Street Lighting 53 Working Model Of Power Generation By Wind Power 54 Different Models Of Circuit Breakers 55 Lightning Arrestor Model 56 Different Type Of Fuses Fitted In Study Board 57 Different Types Oflamps With Necessary Chock, Starter, Transformer 58 Study Of Electric Arc Welding Using Welding Transformer 59 Study Of Induction Heating Using Induction Heater 60 Vernier Caliper 61 Screw Gauge 62 Sperometer 63 Concave & Convex Mirror, Focal Length 20 Cm 64 Concave & Convex Mirror, Focal Length 50 Cm 65 Concave Surface 66 Glass Slab, Dim.- 7.5X5x1.8 ( Cm3 ) 67 Glass Slab, Dim.- 10X6x1.8 ( Cm3 ) 68 Wood, Metal Inclined Plane Aparatus For Determining Coefficient Of Static Friction Between Wood And Glass 69 Hooks Law Apparatus 70 Mercury 71 Magnet 72 Small Hollow Metal Cylinder 73 Small Crome Steel Bearing Balls 74 Linear Expansion Vertical Apparatus 75 Fly Wheel Apparatus
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 14
West Bengal View Result →
17.
Educational and Research Institute #10140471 Price Bid
Supply Of Library Books Supply Of Library Bookssupply Of Library Books , Library Books , Introduction To Database Management System P.K. Yadav , Database Management Systemp.K. Yadav , Concepts Of Database System P.K. Yadav , Software Project Managementrajiv Chopra , Software Testing Rajiv Chopra , Software Testing And Quality Assurance Rajiv Chopra , An Integrated Approach To Software Engineering Rajiv Chopra , Internet Of Things (Iot) Rajiv Chopra , Object Oriented Software Engineeringrajiv Chopra , Introduction To Microprocessor Rajiv Chopra , Requrements And Estimation Techniques Rajiv Chopra , Fundamentals Of Computing Rajiv Chopra & Rishbh Anand , An Introduction To Automata Theory & Formal Languages Adesh K. Pandey , Introd. To Automata Theory & Formal Lang.Adesh K. Pandey , Fundamentals Of Compiler Designadesh K. Pandey , Concepts Of Complier Designadesh K. Pandey , Concepts Of E-Commerceadesh K. Pandey , Internet Fundamentalsadesh K. Pandey , Network Security & Administrationadesh K. Pandey , Internet & Web Designingadesh K. Pandey &Er.Neha Dutta , Introduction To E-Commerce & Erpadesh K. Pandey , A Textbook Of Compiler Designadesh K. Pandey , Elements Of Compiler Designadesh K. Pandey , Theory Of Automata And Computationadesh K. Pandey , Theory Of Computationadesh K. Pandey , Fundamentals Of Electronics Commerce Adesh K. Pandey , Internet Programming Using Javapandey & Pandey , Fundamentals Of Computer Programming In Cs.K.Jha , System Analysis & Designs.K.Jha , Programming In Cs.K.Jha , Pc Organization S.K.Chauhan , Pc Upgrading Maintenance & Trouble Shooting Guide , Neural Network & Fuzzy Logicvinoth Kumar And R.Saravana Kr. , Soft Computingk.Vinoth Kumar , Fundamentals Of Soft Computingk.Vinoth Kumar , Computer Concepts & Programming In Camit Kumar Mishra , Basic Computer Engineeringamit Kumar Mishra , Introduction To Computer Systemamit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , A Textbook Of Computer Architecture Amit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , Computer System And Programming In C Amit Kumar Mishra , Computer Architecture & Organizationamit Kumar Mishra , Information Security And Cyber Laws Amit Kumar Mishra , Advanced Computer Architecture Amit Kumar Mishra , Computer Architecture Amit Kumar Mishra , Computer Programming Amit Kumar Mishra , Fundamentals Of Computer And Programming Amit Kumar Mishra , Software Engineeringbali And Bali , Fundamentals Of Software Engineeringbali And Bali , Thinking In C++ Rajesh Kocher & Sunil K. Pandey , Learn Autocadrajesh Kocher & Sunil K. Pandey , Fundamentals Of Computer Programming And Itsunil K. Pandey& V.K. Jain , Object Oriented Programing With C ++ Sunil K. Pandey& Rajesh Kochher , Programming Language Nitin Upadhyay , The Design & Analysis Of Algorithmsnitin Upadhyay , Data Structures And Algorithms Using C Nitin Upadhyay , Question Bank In Computer Sciencenitin Upadhyay, Pankaj Sharma , Computer Networks Dr. Sanjay Sharma , Elements Of Computer Networks Dr. Sanjay Sharma , Computer Networks Dr. Sanjay Sharma , A Course In Computer Networksdr. Sanjay Sharma , Introduction To Computer Networks Dr. Sanjay Sharma , Computer Networks-I Dr. Sanjay Sharma , Advanced Computer Networksdr. Sanjay Sharma , Computer Networks-Ii Dr. Sanjay Sharma , Principles Of Computer Networks Dr. Sanjay Sharma , Digital Logic Design Dr. Sanjay Sharma , A Textbook Of Computer Network Dr. Sanjay Sharma , Fundamentals Of Computer Network Dr. Sanjay Sharma , Introduction To Web Technologypankaj Sharma , Fundamentals Of Web Technologypankaj Sharma , Artificial Intelligencepankaj Sharma , Working With Artificial Intelligencepankaj Sharma , Web Engineering Pankaj Sharma , Manet And High Speed Networkspankaj Sharma , Computer Organization Pankaj Sharma , Computer Architecture & Organizationpankaj Sharma , System Programmingpankaj Sharma , Expert System Pankaj Sharma , Information Security & Cyber Lawspankaj Sharma , System Programming & System Admin. Pankaj Sharma , Rapid Application Devlop.Using Visual Basic & Visual C++Pankaj Sharma , Parallel Algorithms Pankaj Sharma , Pattern Recognitionpankaj Sharma , Web Developmentpankaj Sharma , Information Storage & Managementpankaj Sharma , Web Engineering Pankaj Sharma , System Administration Pankaj Sharma , Information Security Pankaj Sharma , Cloud Computing Pankaj Sharma , Introduction To Web Engineering Pankaj Sharma , Web Administration Pankaj Sharma , Dot Net Framework With C# Programming Dr. Lalit Arora , Object Oriented System With C++ Dr. Lalit Arora , Object Oriented System With Javadr. Lalit Arora , Internet & Javadr. Lalit Arora , C# Using .Net Frameworkdr. Lalit Arora , Java Programming & Web Site Designdr. Lalit Arora , Object Oriented Techniques Java Dr. Lalit Arora , Object Oriented Programing Using C ++Dr. Lalit Arora , It Skills And Technology Dr. Lalit Arora , Concept Of Programming And Oopsdr. Lalit Arora, Dr. Raj Kumar & Dr. Anjali , Computer Organization & Architecture Dr. Lalit Arora, Dr. Raj Kumar & Dr. Anjali , Computer Graphicsudit Agarwal , Introduction To Computer Graphicsudit Agarwal , Data Structures Using C Udit Agarwal , Data Structures Udit Agarwal , Software Engineeringudit Agarwal , Distributed Systems Udit Agarwal , Distributed Computing Udit Agarwal , Data Mining And Data Warehousingudit Agarwal , Computer Graphics And Multimedia Udit Agarwal , Programming For Problem Solving Udit Agarwal , Operating Systemvijay Shukla , Multimedia System, Technology & Communication Sujata Pandey , Data Mining & Data Ware Housing , Network Programmingkadambri Agarwal , Programming Languages Kadambri Agarwal , Network Technologykadambri Agarwal , System Network Administration Kadambri Agarwal , Graph Theoryk.Patrai , Discrete Structures & Graph Theoryk.Patrai , Mobile Computingvishnu Sharma , Advances Mobile Computingvishnu Sharma , “Operating System Internal And Design Principles”, N William Stallings, Pearson Education,7 Th Editio , “Operating System, Principles & Design”,Pal Chaudhury, Philearning, Firstedition , Operating System Concepts”Abraham Siberschatz Galvin, Gagne, Wileypublishers,9 Thedition, , “Operating Systems”,Harvey M. Deiteland Paul J.Deitel, David , Programming With Cbyron Gottfried. Schaum Series -Tmgh , Programming And Problem Solving Using Cisrd Group, Lucknow Tata Mc-Grawhill, Newdelhi , Let Us Cyashavent Kanethar Bpb Publication, 2005, New Delhi , Introduction To Data Structures With Applications.Trembley And Sorenson Tata Mc-Grawhill, Newdelhi , Fundamentals Of Data Structures In C Horowitz , Sahni Anderson- Freed University Press, Hyderabad , Introduction To Data Structuresbhagat Singh Tmgh, New Delhi , Data Structures And Algorithmsg.A. Vijayalakshmi Pai Tmgh, New Delhi , “Computer System Architecture”,M.Morris Mano, Prentice –Hall Of India Pvt Limited,Revised Third Edition. , “Computer Organization And Architecture Designing For Performance”,William Stallings, Pearson Publications, Eighth Edition. , “Computer Organization And Design:The Hardware/Software Interface”, David A. Patterson And John L.Hennessey, Morgan Kauffman / Elsevier, Fifth Edition, 2014. , “Computer Architecture And Organization”,John P. Hayes, Tata Mc Graw Hill, Thirdedition , Computer Organization And Embedded Systems”,Carl Hamacher, Zvonko Vranesic, Safwat Zaky And Naraig Manjikian, Sixth Edition, Tata Mcgraw Hill, 2012 , “The Internet Book”, Prentice Hall. “Douglas E. Comer” , “Web Development And Design Foundations With Html5”, Pearson “Terry Felke-Morris” , “Html & Css:The Complete Reference”, Tata Mcgras-Hil “Thomas A. Powell, Fritz Schneider” , “Java Script: The Complete Reference”, Tata Mcgras-Hil “Thomas Powell, Fritz Schneider” , “Beginning Php6, Apache, Mysql, Web Development”, Wrox Publications “Timothy Boronczyk, Elizabeth Naramore, Jason Gerner, Yann Le Scouarnec, Jeremy Stolz, Michael K. Glass” , ,“Programming With Java”, Tata Mc-Graw Hill, Newdelhi E. Balagurusamy “ , “Java - The Complete Reference”, Tata Mc Graw Hill, New Delhi “Herbert Schildt “, , “Java 2,J2se1.4 Complete”, Bpb Publications , “Database System Concepts”,Mc Graw Hill Education. Seventh Edition. “Abraham Silberschatz, Henry F.Forth, S.Sudarshan”, , “Murach’S Mysql”, Mike Murach & Associates, Inc. 3Rd Edition. “Joel Murach”, , “The Complete Reference Mysql” “Vikram Vaswami”, , “Mysql Developers Library”, Addison Wesley (4Th Edition) “Paul Dubois”, , Introduction To Computing And Problem Solving Using Python E.Balagurusamy , Learning Python Programmingjeffrey Elkner, Allan B. Downey, Chris Meyer , Taming Python By Programmingjeeva Jose , Python Programming , Mcgraw Hilleducation(India) Pvt. Ltd. 2018 5. Learn And Practiceashok Namdev Kamthane And Amit Ashok Kamthanepython Programming Swapnil S , A Course In Electrical Technologyj.B Gupta , A Course In Electrical Technology-Ij.B Gupta , A Course In Electrical Technology-Iij.B Gupta , A Course In Electrical Technology-Iiij.B Gupta , Generation & Economic Considerationsj.B Gupta , A Course In Electrical Powerj.B Gupta , A Course In Power Systems J.B Gupta , Theory & Performance Of Electrical Machinej.B Gupta , Utilization Of Electric Power & Electric Tractionj.B Gupta , Utilization Of Electrical Energy And Traction J.B.Gupta, R. Manglik, R. Manglik , Switchgear & Protectionj.B Gupta , A Course In Electrical Installation Estimating & Costingj.B Gupta , Fundamentals Of Electrical & Electronics Engineering J.B Gupta , Transmission & Distribution Of Electrical Powerj.B Gupta , Basic Electrical Engineeringj.B Gupta , Basic Electricity J.B Gupta , Electrical Measurements & Measuring Instrumentsj.B Gupta , Electrical Machines-Ij.B Gupta , Electrical Machine - Iij.B Gupta , An Integrated Course In Electrical Engineering J.B Gupta , Explanation/Solutions To An Integrated Course In Electrical Engineering J.B Gupta , An Integrated Course In Electrical Engineering Volume I J.B Gupta , An Integrated Course In Electrical Engineering Volume Ii J.B Gupta , Question Bank In Electrical Engineeringj.B Gupta , Question Bank In Electrical Engineering Volume I J.B Gupta , Question Bank In Electrical Engineering Volume Ii J.B Gupta , A Text Book Of Electrical Engineeringj.B Gupta , Electrical Science J.B Gupta , Electromechanical Energy Conversionj.B Gupta , Electromechanical Energy Conversion- Ij.B Gupta , Electromechanical Energy Conversion- Iij.B Gupta , Electrical Machines (Ac, Dc Machine)J.B Gupta , A Text Book Of Electrical Technologyj.B Gupta , Electrical Machines & Automatic Controlj.B Gupta & Hasan , Elements Of Power Systems J.B Gupta , Power System Analysis J.B Gupta , Fundamentals Of Switchgear & Protectionj.B Gupta , Electrical Engineering Materials & Semiconductor Devices J.B Gupta , Basic Electrical & Electronics Engineering J.B Gupta , Electrical Machines-Ij.B Gupta , Electrical Machines-Ii J.B Gupta , Electrical Technologyj.B Gupta , Basic Electrical Engineeringj.B Gupta , Fundamentals Of Electrical Engineering J.B Gupta , Elements Of Electrical Engineering J.B Gupta , Basic Electrical Engineering J.B Gupta , A Textbook Of Electrical Science J.B Gupta , A Textbook Of Electrical Engineering Rajeev Manglik , Power System & Protectionn.K.Datta , Theory & Performance Of Electrical Machine Design Dr. N.K.Datta , Principles Of Electrical Machine Designr.K. Agarwal , Electrical Engineering Materialsrakesh Dogra , Electrical Engineering Drawing-Isurjit Singh , Electrical Engineering Drawing-Iisurjit Singh , Electrical Measurements & Measuring Instrumentsm.L.Anand , Basic Electrical Engineeringtarlok Singh , Installation Commissioning & Maintain. Of Elect. Equip.Tarlok Singh , Electrical Measurement & Measuring Instrumentstarlok Singh , Elements Of Electrical & Electronics Engineering Tarlok Singh , Utilization Of Electric Energytarlok Singh , Electrical Machine-Itarlok Singh , Electrical Machine-Iitarlok Singh , Electrical Power-Iitarlok Singh , Fundamentals Of Electrical Engineering Tarlok Singh , Electrical Science Tarlok Singh , Transmission & Distributiontarlok Singh , Modern Electric Traction Tarlok Singh , Energy Managementdr. Sanjeev Singh, Umesh Rathore , Basic Instrumentation System & Programmable Logic Controllerumesh Rathore , Industrial Instrumentationumesh Rathore , Programmable Logic Controller And Microcontrollers Umesh Rathore , A Textbook Of Electrical Workshop Practices Umesh Rathore, Naresh Kumar Sharma , A Textbook Of Energy Science & Engineering Umesh Rathore , Fundamentals Of Managementdr. R.C.Bhatia , Sub-Station Engineering Design, Concepts & Computer Applications Er. R.S.Dahiya , An Introduction To Electric Traction Sachidananda Mallik & Rupali G. Nazar , Fundamentals Of Managementrenu Rana , Special Electrical Machines Simmi P Burman , High Voltage Engineering Simmi P Burman & Nikita Gupta , Electrical Engineering Laboratory Practice P. Tiwari & S. Sairola , Ehv-Ac, Hvdc Transmission And Distribution Engineering Sanjay Kumar Sharma , Basic System Analysissyed Hasan Saeed & Faizan Arif Khan , Power Quality Simmi P. Burman & Bipin Singh , Scada And Energy Management System Er. Tanuj Kumar Bisht , Computer Aided Design Of Electrical Machines V.K. Maurya, Ritu Raj Jallan, Shasya Shukla , A Textbook Of Power System Operation And Control K. Nisha , Electromagnetic Field Theory Syed Hasan Saeed & Faizan Arif Khan , Installation Maintenance And Repair Of Electrical Machines And Equipments Madhvi Gupta , Electrical Engnineering Design, Drawing & Estimation Madhvi Gupta, Ankit Agarwal , Control Systems S.P. Meher , Fundamentals Of Smart Grid Technology Bharat Modi, Anu Prakash & Yogesh Kumar , Electric Vehicle Dr. Nitesh Tiwari , Ssc-Je-Question Bank In Electrical Engineering J.B.Gupta , Ace Academy Gate 2024 Ace Publication , Gate/Ese/Psus Electrical Handbook Ace Publication , Ace Academy Ese Vol 1And Vol 2 Ace Publication , Yct Electrical Engineering Je-Vol And Vol 2 Yct Publications , Yct Electrical Engineering Ae-Vol And Vol 2 Yct Publications , Basic Electrical Engineering Vol 1S Chand Publication,B L Theraja , Ac & Dc Machine Vol 2 S Chand Publication,B L Theraja , Transmission And Distribution Utilisation S Chand Publication,B L Theraja , Electronics Devices And Circuits S Chand Publication,B L Theraja , Power Electronics Khanna Publications,Dr. Ps Bhimbra , Fundamentals Of Electrical Circuits Mc Graw Hill,Charles K.Alexander , Objective Electrical Technology V.K.Mehta,Rohit Mehta , Principles Of Power System V.K.Mehta,Rohit Mehta , Principles Of Electrical Machines V.K.Mehta,Rohit Mehta , Control Of Machines New Age International , Sk Bhattacharya , Linear Integrated Circuits New Age International , Sk Bhattacharya , Programmable Logic Controllerpearson, John.R.Hackworth , Principles Of Electromagnetics Oxford,Sadiku & Kulkarni , A Course In Electrical & Electronics Measurements And Instrumentation Dhanpat Raj & Co ,A K Sawhney , Fundamentals Of Digital Circuits Phi, A.Anand Kumar , Power Electronics Devices Circuits And Applicationpearson, Muhammad H. Rashid , Electrical Power System C.L.Wadhwa, New Age International , Modern Power System Analysis Mc Graw Hill,D.P.Kothari , Electrical Machinery Khanna Publications,Dr. Ps Bhimbra , Generalized Theory Of Electrical Machines Khanna Publications,Dr. Ps Bhimbra , Electronics Devices And Circuits S.Salivahanan,Mc Graw Hill , Micro Controller Principles And Applications Ajit Pal,Eastern Economy Edition , Power Plant Engineering Mc Graw Hill,P K Nag , Power System Engineering Lp, R.K.Rajput , Non Conventional Energy G D Rai,Khanna Publication , Basic Electrical And Electronics Engineering Mc Graw Hill,D.P.Kothari , Repair And Maintenance Bpb Publications,Shashi Bhushan Sinha , Electrical Applications Haynes , Electronic Devices And Circuitsj.B.Gupta , Basic Electrical And Electronics Engineeringj.B.Gupta , Linear Integrated Circuitsj.B.Gupta , Fundamentals Of Analog Electronicsj.B.Gupta , Basic Electronics J.B.Gupta , Electrical & Electronics Engineering J.B.Gupta , A Textbook Of Basic Electronics J.B.Gupta, Rajeev Manglik, Rohit Manglik , Analog Devices And Circuits J.B.Gupta , Fundamentals Of Electronics Devices & Circuits J.B.Gupta , Electronic Devices & Circuits Dr. Sanjay Sharma , Analog & Digital Electronicsdr. Sanjay Sharma , Signal & Systemsdr. Sanjay Sharma , Digital Signal Processing Dr. Sanjay Sharma , Electronics Circuits Dr. Sanjay Sharma , Digital Electronics Dr. Sanjay Sharma , Digital Communications Dr. Sanjay Sharma , Fundamentals Of Electronic Devicesdr. Sanjay Sharma , Digital Communication Dr. Sanjay Sharma , Digital Signal Processing Dr. Sanjay Sharma , Principle Of Digital Signal Processingdr. Sanjay Sharma , Analog & Digital Communication Dr. Sanjay Sharma , Signal & System Dr. Sanjay Sharma , Fundamentals Of Communication Engineering Dr. Sanjay Sharma , Communication Engineeringdr. Sanjay Sharma , Digital Electronics And Logic Design Dr. Sanjay Sharma , Digital Circuits & Systems Dr. Sanjay Sharma , Wireless Communication Systems Dr. Sanjay Sharma , Electronic Circuits Dr. Sanjay Sharma , Digital Electronics & Design Aspects Dr. Sanjay Sharma , Electronic Devices Dr. Sanjay Sharma , Signals & Systems Dr. Sanjay Sharma , Digital Design Dr. Sanjay Sharma , Analog And Digital Electronics Dr. Sanjay Sharma , A Textbook Of Electronics Engineering Dr. Sanjay Sharma , Fundamentals Of Digital Electronics Dr. Sanjay Sharma , Fundamentals Of Digital Image Processing Dr. Sanjay Sharma , Digital Image Processing Dr. Sanjay Sharma , Wireless Communication System Dr. Sanjay Sharma , Mobile Computing Dr. Sanjay Sharma , Switching Theory And Logic Design Dr. Sanjay Sharma , Essentials Of Computer Networks Dr. Sanjay Sharma , Data And Computer Communications Dr. Sanjay Sharma , Fundamentals Of Switching Theory & Logic Design Dr. Sanjay Sharma , Essentials Of Analog Communication Dr. Sanjay Sharma , Data Communication And Computer Networks Dr. Sanjay Sharma , A Textbook Of Data Communication And Networks Dr. Sanjay Sharma , Essentials Of Wireless Communication Dr. Sanjay Sharma , Fundamentals Of Electronics Engineering Dr. Sanjay Sharma , Wireless Communicationsdr. Sanjay Sharma , Electronic Devices & Circuits Dr. Sanjay Sharma , Fundamentals Of Digital Signal Processing Dr. Sanjay Sharma , Fundamentals Of Analog Communication Dr. Sanjay Sharma , A Textbook Of Signals & Systems Dr. Sanjay Sharma , Solid State Devices & Circuits Dr. Sanjay Sharma , Electronics-I Dr. Sanjay Sharma , Signal Processing And Linear Systems Dr. Sanjay Sharma , Emerging Domain In Electronics Engineering Dr. Sanjay Sharma , Circuits & Systemsk.M.Soni , Circuit Analysis And Synthesis K.M.Soni , Advanced Control Systemsk.M.Soni , Network Analysis & Systhesisk.M.Soni , Network Analysisk.M.Soni , Network Theory K.M.Soni , Fundamentals Of Network Analysis & Synthesis K.M.Soni , Basic System Analysisk.M.Soni , Signals And Systems K.M.Soni , Digital Electronicsb.R.Gupta And V.Singhal , Consumer Electronicsb.R.Gupta , Power Electronicsb.R.Gupta And V.Singhal , Introduction To Electric Drivesb.R.Gupta And V.Singhal , Question Bank Electronics & Communicationengineeringb.R.Gupta And V.Singhal , Fundamentals Of Electric Drives And Control B.R.Gupta And V.Singhal , Industrial Electronics & Instrumentationsunil Kumar , Optical Fiber Communicationsapna Katiyar , Satellite Communicationsapna Katiyar , Advanced Communication Systemsapna Katiyar , Electronic Switchingsapna Katiyar , Introduction To Optical Communicationsapna Katiyar , Telecommunication Networkssapna Katiyar , Fundamentals Of Optical Fiber Communicationsapna Katiyar , A Textbook Of Optical Fiber Communication Systems Sapna Katiyar , Introduction To Satellite Communcation Sapna Katiyar , Tv And Satellite Communications Sapna Katiyar , Vlsi (Technology,Design & Basics Of Microelectronics)Sapna Katiyar , 8051 Microcontroller & Embedded Systemsampath K. Venkatesh , Digital Circuit System Using Vhdlneelu Chaudhary And Shipra Gupta , Digital Logic & Design Pratima Manhas And Shaveta Thakral , Digital Electronicspratima Manhas And Shaveta Thakral , Vlsi Design Pratima Manhas & Shaveta Thakral , Introduction To Microprocessors & Interfacingaashutosh Gupta , Electromagnetic Fields & Wavesr.Gowri , Wireless Communicationaman Kundra And Amrita Sandhu , Trouble Shooting & Maintenance Of Elect. Equipmentsk.Sudeep Singh , Fundamentals Of Television & Radar Engineering K.K Sharma , Fundamentals Of Radar, Sonar & Navigation Engineering K.K Sharma , Fundamentals Of Data Communicationk.K Sharma , Digital & Analog Communicationk.K Sharma , Microwave & Radar Engineeringk.K Sharma , Antenna & Wave Propagation A.K.Gautam , Principle Of Communication Engineering A.K.Gautam , Communication System-Ia.K.Gautam , Microwave Engineering A.K.Gautam , Control System Hasan Saeed , Digital & Analog Communicationbrijesh Verma , Mobile Communicationbrijesh Verma , Telemetry & Data Transmissionr.N.Baral , Electronics Devices & Circuits-I M.L.Anand , Bio-Medical Signal Processing Rakesh Kumar , Medical Electronics O.N. Pandey & Rakesh Kr. , Instrumentation And Process Control O.N. Pandey , Electromagnetic Field Theory Parul Dawar , Digital Circuit And Systems Shipra Gupta , Vlsi Designc.P Verma , Introduction To Vlsi Circuits & Systems Deepak Garg , Vlsi Technology Deepak Garg , Fundamentals Of Vlsi Design Deepak Garg , Basics Of Vlsi Design With Vhdl Deepak Garg , Microprocessor & Interfacingn. Marriwala , Embedded System Design N. Marriwala & Ritu Khullar , Fundamentals Of Radar & Navigation Sachin Gupta , Optical Communication Sachin Gupta , Microwave And Radar Engineeringravi Garg & Ankaj Gupta , Antenna And Wave Propagation Prashant Pandey , Digital Electronics Preeti Sehrawat , Electronic Circuits M. Elangovan , Electromagnetics And Antennas H. Singh , Optoelectronics & Optical Communication Satyajit Das , Control Systems Engineering Dr. S. Panda, S. Padhy & S.R. Das , Microcontroller And Embedded Systems Ankaj Gupta , Microprocessors And Microcontrollers Ankaj Gupta , Fundamentals Of Microprocessors And Embedded Systems Ankaj Gupta , Microprocessors Shweta Goyal & Swati Gargust , Industrial Electronics And Control Of Drives Shweta Goyal & Swati Gargust , Engineering Economics And Industrial Management Dr. R.K. Singal & Er. Rishi Singal , Microwave & Radar Engineering Er. Rajesh Dhiman , Embedded Systems Anurag Arora , Wireless Sensor Networks Sunil Gupta & Dr. Harsh K. Verma , Probability, Random Variables And Stochastic Methods Himanshu Chaurasiya & Dr. K.M. Soni , Relational Database Management System Pooja Sharma & D.S. Sehrawat , Semiconductor Devices And Circuits C.S. Murlidharan Sharma , Industrial Power Electronics Partha K. Ganguly , An Insight To Matlab & Simulink Dr. Shailender Gupta & Bharat Bhushan , Fundamentals Of Optical Communication & Networks Shila Ghosh, Somali Sikder , Digital Image Processing Ketki Kshirsagar, Rajeshree Shinde , Embedded System & Microcontroller Manish Verma & K.B. Singh , Electronic Design Automation & Logic Synthesissarita Chauhan , Artificial Intelligence For Engineers Malvika Gupta, Medha Malik , Principles Of Electronics Dr. S.K. Bhattacharya , Machine Learning Dr. Himanshu Sharma , Strength Of Materials R.S.Khurmi S.Chand & Company Ltd, New Delhi , Strength Of Materials S.Ramamirtham Dhanpat Rai , Engineering Mechanics R K Bansal Laxmi Publications Pvt.Ltd. , Building Materials P.C.Varghese Prentice-Hall Of India (P) Ltd., I Edition , Building Construction Dr. B.C. Punmia Laxmi Publications (P)Ltd New Delhi. , Building Construction S.C.Rangwala Charotar Publishing House, Vii Edition , Surveying Volume I Punmia.B.C. Ashok K.Jain & Arun K. Jain Lami Publications Private Limited, 16Th Edition , Surveying Volume Ii & Iii Punmia.B.C, Ashok Jain & Arun K. Jain Lami, Publications Private Limited., 15 Th Edition, , Fundamentals Of Surveying S. K. Roy Phi Learning Private Limited , Building Planning And Drawing Dr.N.Kumaraswamy Charotor Publishing House , Building Planning And Construction G. Vaidhyanathan, I. Kulasekaran, G. Sathish Kumar , A Guide To Civil Engineering Drawing V.R.Thothathri , Theory Of Structures S. Ramamrutham Dhanpat Rai Publications, New Delhi , Theory Of Structures B.C. Punmia, Ashok Jain & Arun Jain Laxmi Publications , Analysis Of Structures V.N. Vazirani & M.M. Ratwani , Fluid Mechanics R.K. Bansal Lakshmi Publications , Hydraulics,Fluid Mechanics And Hydraulics Machines S. Ramamirtham Dhanpat Rai & Sons, New Delhi , Hydraulics, Fluid Mechanics And Hydraulics Machines K.R. Arora Standard Publishers & Distributors, New Delhi , Highway Engineering S.K.Khanna And C.E.G Justo Nem Chand And Bros, Roorkee. , Highway Engineering Rangwala Charotor Publishing House Pvt. Ltd , A Text Book Of Transportation Engineering S P Chandola S Chand & Company Ltd , Bridge Engineering Rangawala Charotor Publishing House , Reinforced Concrete Design N Krishnaraju New Age International Publications, 2012 , Is 456-2000 , Steel Structures Hand Book Sp16 , Limit State Design Of Reinforced Concrete B C Punmia Laxmi Publications,2007 , Design Of R C C And Structural Elements ( Rcc Vol I) S S Bhavikatti, New Age International Publications, 2011 , Environmental Engineering B C Punmia Lami Publications, 2010 , Waste Water Engineering B C Punmia ,Laxmi Publications, 2010 , Environmental Engineering A.Kamala,D.L.Kanthraotata Mcgraw Hill Publishing Company Ltd.,New Delhi , Concrete Technologym.S. Shetty S.Chand & Company Pvt. Ltd. New Delhi. , Soil Mechanics And Foundation Engineering B C Punmia Laxmi Publications (P) Ltd., 2005 , Civil Engineering Drawings.C. Rangwala Charotor Publishing House , Construction Management Sanga Reddy. S Kumaran Publications, Coimbatore , Steel Structures Dr.Subramaniam , Town Planning S.C. Rangwala , Principles And Practice Of Town And Country Planninglewis B. Keeble Estates Gazette, University Of Michigan, 2010 , Estimating & Costing L.N.Dutta Dhanpat Rai & Sons , Estimating & Costingrangawala ,Charotor Publishing , Quantity Surveying & Valuation N.A.Shaw Khanna Publishers; , Civil Engineering Competitionsbooks R.Agor Khanna Publishers; , Civil Engineering (Objective Type) P Jaya Rami Reddy , Laxmi Publications , Reinforced Concrete Design S.Unnikrishna Pilla & Devadas Menon, Mc Graw Hill Publications , Limit State Design Of Steel Structures S K Duggal , Mc Graw Hill Publications , Basic And Applied Soil Mechanics , Gopal Ranjan & A S R Rao, New Age International Publications , Fluid Mechanics And Fluid Power Engineering Dr. D.S Kumar , Basics Of Mechanical Engineering Dr. D.S Kumar , Mechanical Engineering (Objectives) Dr. D.S Kumar , Refrigration And Air Conditioner Dr. D.S Kumar , Total Quality Management Dr.K.C.Arora , Engineering Drawing ,Ps Gill , Textbook Of Machine Drawing,Ps Gill , Geomatric Dimensioning And Tolerancing , Ps Gill , Computer Aided Drafting Using Autocad , Ps Gill , Learning Autocad , Ps Gill , Auto Cad 2D Design Fundamentals , Ps Gill , Auto Cad 3D Models Fundamentals Ps Gill , Operation Research ,Ap Verma , Textbook Of Industrial Management , Ap Verma & N.Mohan , Industrial Engineering And Management , Ap Verma , Stem Tables Rk Singal , Manufacturing Practices (Workshop Practices) Rk Singal , Engineering Metrology And Instrumention , Rk Rajput , Strength Of Materials , Rk Rajput , Textbook Of Material Science , Callister , Workshop Technology , Virendra Narula , Manufacturing Process , Virendra Narula , An Intoduction To Nc And Cnc , S.Vishal , Computer Aided Manufacturing, S.Vishal , Automobile Engineering , Km Moeed , Manufacturing Process I Sandy Khippal , Manufacturing Process Ii Sandy Khippal , Principals Of Powder Meatallurgy , Ps Gill , Inspection And Quality Control, Ap Verma , Automation Of Robotics, Khushdeep Goyal , Industrial Automation And Robotics, Khushdeep Goyal , Cnc Machines And Automation , Khushdeep Goyal , Production Planing And Control , Rk Singal , Theroy Of Machines , Rk Singal , Data Book For Designing Machine Elements , Arunkumar , Entreprenurship Development, Ranbirsingh , Unconventional Manufacturing Process , Rahul Jain , Mechanics Of Solids , Timoshenko , Engineering Mechanics , Timoshenko , Mechanics Of Solids , Egor P Popov , Fluid Mechanics And Fluid Power Engineering, Frank M White , Matlab For Dummies , John Mueller , Machine Learning For Dummies , John Mueller , Thermodynamics , Cengel , The Functional Aspects Of Communication Skills, Dr. P. Prasad , Professional Communication, Dr. P. Prasad , Universal English (In The Twenty-First Century) Dr. P. Prasad , Effectual Communication Skills , Bhupender Kaur , Engineering Physics, Dr. Abhijit Nayak , Essentials Of Physicsdr. Rakesh Dogra , Engineering Physics (Aicte) Dr. Rakesh Dogra , Applied Physics- Imanpreet Singh , Applied Physics -Iimanpreet Singh , Laser Systems & Applications, Dr. Rajesh Mishra , Engineering Physics-I, Dr. Rajesh Mishra , Fundamentals Of Polymer Science & Technology, Anshu Srivastava & Shakun Srivastava , Nuclear Science, Chanchal Garg , Petrochemicals, Anjana Srivastava , Impact Of Science Technology On Society, Ishwar Singh , Introduction To Bioscience , Dr. O.N. Pandey , Introduction To Bioscience Sweety Israni , A Textbook Of Nanoscience , Dr. Rakesh Kumar & Dr. Kamala Pati Tiwary , Professional Communicationdr. Raavee Tripathi , Technical Writing , Dr. O.N. Pandey , Engineering Economics , Dr. O.N. Pandey , Numerical Analysis Dr. Surbhi Gupta & Dr. Abhilasha Sharma , Business Environment ,Anita Sengar , Numerical Methods ,Girish Nayyar , Human Values And Professional Ethics , Smriti Srivastava , Discrete Mathematical Structures , Adesh K. Pandey & Rakesh Dube , Effective Technical Communication , Dr. Bharti Kukerja, Dr. Anupama Jain , Human Behaviour , Dr. Amit Jain , Organisational Behaviour , Er. Ishwar Singh, Dr. Bratpal Singh , Universal Human Values And Professional Ethics , Dr. Ritu Soryan , Soft Skills , Dr. Ritu Soryan , Communication Skills, Dr. Ritu Soryan , Constitution Of India , Richa Chaudhary, Arunima Mishra, Imran Khan , Concise Engineering Physics , Dr. Shiva Kant Pathak , Discrete Mathematicsanjana Gupta , Discrete Structures, Adesh K. Pandey , Discrete Structure, Kalika Patrai , Applied Mathematics- I, Dr. Hari Arora , Applied Mathematics- Ii, Anita Sachdeva & Hari Arora , Applied Mathematics- I, Dr. J.S.Bindra And K.S.Gill , Applied Mathematics- Ii, Dr. J.S.Bindra And K.S.Gill , Applied Mathematics- Iii, Dr. J.S.Bindra And K.S.Gill , Elements Of Engineering Mathematics- I Dr. V.P. Mishra , Elements Of Engineering Mathematics- Ii, Mishra & Mishra , Elements Of Engineering Mathematics- Iii, Mishra & Mishra , Engineering Mathematics-I , Mishra & Mishra , Question Bank In Engineering Mathematics , Mishra & Mishra , A Textbook Of Applied Mathematics-I, Dr. Hari Arora , A Textbook Of Applied Mathematics-Ii , Dr. Hari Arora , A Textbook Of Applied Mathematics-Iii , Dr. Hari Arora , A Textbook Of Applied Mathematics-Iv , Dr. Hari Arora , A Textbook Of Engineering Mathematics-Ii , Dr. Hari Arora , A Textbook Of Engineering Mathematics-I (Calculus & Linear Algebra) , Dr. Hari Arora , Applied Mathematics-Ii (Previous Year Papers) Dr. Hari Arora , Numerical Methods And Optimization Dr. Hari Arora , Probability & Statistics Dr. Hari Arora , Differential Equations And Complex Analysis Dr. Hari Arora , Numerical Methods For Engineers And Scientists Dr. Hari Arora , Engineering Mathematics-Iii Amit Gupta , Mathematics (Cbse) (Class - Ix)Upadhyay & Upadhyay , Mathematics (Cbse) (Class - X) Upadhyay & Upadhyay , Mathematics (Cbse) (Class - Xi) Upadhyay & Upadhyay , Mathematics For Mechanical Engineering (A Solution Manual) Salman Hussien Omran, Laith Jaffer Habeeb , A Textbook Of Finite Element Method , Pushpam Kumar Sinha , Engineering Chemistry , Dr. Sunita Rattan , Engineering Chemistry With Experiments , Dr. Sunita Rattan , Comprehensive Engineering Chemistry, Dr. Sunita Rattan , Experiments In Applied Chemistry , Dr. Sunita Rattan , Theory & Practical Of Engineering Chemistry, Dr. Sunita Rattan , A Textbook Of Engineering Chemistry , Dr. Sunita Rattan , Engineering Chemistry (With Experiments) , Dr. Sunita Rattan , Applied Chemistry- I, Dr. Raman Rani Mittal , Applied Chemistry- Ii, Dr. Raman Rani Mittal , Engineering Chemistry, Dr. Renu Gupta , New Course Engineering Chemistry, Dr. S.K. Bhasin , New Course Engineering Chemistry , Dr. S.K. Bhasin , Realm Of Space Science , Rajeev Garg , A Textbook Of Engineering Chemistry , Dr. Sunita Rattan , A Textbook Of Engineering Chemistry , Dr. Rajshree Khare , Applied Physics (Theory & Experiments) , Ritika Sorot Chauhan, Kavindar Tiwari , Applied Chemistry (Theory & Experiments) , Dr. Babita Bhardwaj , Junior English Revised , Haydn Richards => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Tamil Nadu View Result →
18.
Defence #9940447 AOC
Tender For Petty Repair To Internal Electrification At Zone A And B In The Aor Of Age E/M Khumbathang Under Ge Khumbathang; 1 S&Fin repair switch socket combination 2 in 1,3 pin 5 and 15 Amp flush type. 2 S&Fin repair switch socket combination 3 pin 5 Amp flush type all as specified. 3 S&Fin repair switch piano type 5 Amps 230 volts one way all as specified. 4 S&Fin repair holder any type for batten fitting all as specified. 5 S&Fin repair bell,AC 230Volts single pole all as specified. 6 S&Fin repair bell push flush type single pole one way 5 amp all as specified. 7 Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socketor power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc. 8 Material and labourfor point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthingand connected to common earthing with PVCheavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etcfor the following: 9 One light point/ one fan point/ Bell point controlled by one switch all as specified. 10 One 3 pin socket outlet, 5 Amp independent board all as specified. 11 One 3 pin socket outlet 5 Amps on same board with other switches all as specified. 12 All as per item No 8 above butfor point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy dutyISI marked /heavy duty conduitISI marked as required at site alongwith accessories with 2.5 Sq mmFRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth all as specified. 13 M & L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables of 4.0 sqmm size alongwith one earth continuity conductor with FR PVC insulated unsheathed multistranded copper conductor cable of 4.0 sqmm size drawn through and including PVC casing & caping ISI Marked / PVC conduit ISI Marked as required at siteterminated in and including PVC block 50 mm deep for fixing of switches/ sockets for one 3/5 pin socket outlet, 15 Amps, on independent board. Note : Point wiring for 15 Amps on independent board should be tapped from nearest MCB DB all as specified. 14 S & Fswitch socket combination 2 in 1,3 pin 5 and 15 Amp flush type all as specified. 15 S & Fswitch socket combination3 pin, 5 amp flush type all as specified. 16 S & Fswitch piano flush type single pole one way 5 amp all as specified. 17 S & Fbell, AC 230 volts single pole all as specified. 18 S & F bell push flush type single pole one way 5 amp all as specified. 19 S&F ceiling rose3 terminal PVC/polycarbonate type ISI marked all as specified. 20 S&F in repair warm white/ white LED luminaire 600X600 mm,35/36 watt,220V recessed type lumen output >= 122 lumen per watts , THD < 10% environmental friendly , new generation , aesthetically designed , ultra modern with high brightness SMD LEDs as light source incl inbuilt driverswith high efficiency PMMA diffuser soft glare free light completesuitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size all as specified and directed. 21 S&F in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy efficient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose. 22 S&F LED in repair light fitting mirror type 2 ft long 10 watt ,220 V ACdecorative typewith driver holder including LED lamps and connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose. 23 M&L for Distribution boarddouble door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof TPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, triple pole and neutral 415 volts, flush to wall / fixed on surface complete all as specified and directed incl taking down old one. 24 M&L for Distribution boarddouble door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 12 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed incl taking down old one. 25 M&L for Distribution boarddouble door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed incl taking down old one. 26 M&Lfor Distribution boarddouble door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed incl taking down old one. 27 S&F in repair sheet metal enclosure 2 way without bus barwithMCB , SPN 32 Amps 10 KA CSeriescomplete all as specified and directed. 28 S&F in repair Main Circuit breaker triple pole & neutral(TPN) 415 volt C curve 10 KA, 63 Amps capacity IP 20complete all as specified and directed. 29 S&F in repair Main Circuit breaker single pole & neutral (SPN) 240 volt C curve 10 KA 63 Amps capacity IP 20complete all as specified and directed. 30 S&F in repair main Circuit breaker single pole & neutral (SPN)240 volt C curve 10 KA 32 Amps capacity IP 20complete all as specified and directed. 31 S&F in repair Main Circuit breaker single pole (SP), 6 to 32 Amp (SP)240 volt B curve 10 KA, IP 20complete all as specified and directed incl taking down old one . 32 S&F in repair 6 Watt LED spot wall light ( Focus) Metal body complete all as specified and directed. 33 S& F in repair LED Adore Lamp 0.5 W B22 Green(Make :- Havells/ Bajaj/CG) 34 S& F in repair LED Adore Lamp 0.5 W B22 Red (Make :- Havells/ Bajaj/CG) 35 Supply only inrepair PVC insulatedunsheathed copper cable single core as per IS 694:1990 of following size (Make : Havells/Anchor/Polycab/KEI) 36 1.5 Sq mm 37 2.5 Sq mm 38 Supply & fix gang box polycarbonate type suitable for surface mounting with 5 Amp S/S combination Make: Anchor 39 S&F in repairtwo single core 4 sq mm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 4.0 Sq mm copper conductor. (Note - Two runs of 04 Sq mm cable, one run of 4.0 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) 40 S&F in repairtwo single core 6 sq mm for Sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping/ pvc conduit with fixing accessories including one run of 6 Sq mm copper conductor. (Note - Two runs of 06 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) 41 M&L for Repair/Rewinding of exhuast fan, 200 to 250 mm dia sweep complete including minor spare parts required for smooth operation of fan all as specified and directed .Note: cost includes taking down and refixing the same after repair. 42 M&L for Repair/Rewinding of exhuast fan, 300 mm dia sweep complete including minor spare parts required for smooth operation of fan all as specified and directed .Note: cost includes taking down and refixing the same after repair. 43 M&L for Repair/Rewinding of exhuast fan, 450 mm dia sweep complete including minor spare parts required for smooth operation of fan all as specified and directed .Note: cost includes taking down and refixing the same after repair. 44 S&F in repair casing and caping 25mm /PVC heavy dutyincluding all fixing accessories complete all as specified and directed. 45 S&F in repair casing and caping 32mm/PVC heavy dutyincluding all fixing accessories complete all as specified and directed. 46 S&F in repair flexible casing circular typecomplete all as specified and directed. 47 S&F in repairthermostat of size 175 mmfor Geyser complete all as specified. 48 S&F in repair Inner tank of stainless steel suitable for 25ltrs capacity geyser complete all as specified 49 S&F in repair Inner tank of stainless steel suitable for 50 ltrs capacity geyser complete all as specified 50 S&F in replacement heating element for hamam ( ISI marked) of capacity2 KW any type complete all as specified. 51 S&F in replacement heating element for heat pillars of capacity 750 watts to 1.5 KW complete all as specified. 52 S&F in repair Modular switch 6 Amp one way 240 Vas per sample all as directed by Engr- in- Charge 53 S&F in repair Modular switch 16 Amp one way 240 Vas per sample all as directed by Engr- in- Charge 54 S&F in repair Modular socket 6 Amp3 pin 240 Vas per sample all as directed by Engr- in- Charge 55 S&F in repair Modular socket 16 Amp 3 pin 240 Vas per sample all as directed by Engr- in- Charge 56 S&F in repair Modular plate with support frame 3 module complete as per sample all as directed by Engr- in- Charge 57 S&F in repair Modular plate with support frame 6 module complete as per sample all as directed by Engr- in- Charge 58 S&F in repair Modular plate with support frame 8 module complete as per sample all as directed by Engr- in- Charge 59 S&F in repair PVC gang box complete along with switch socket combination 15 Amp as required at site all as specified and directed by Engr- In- Charge 60 S&F in repair plug top 15 Amps,3 pin,230 volts complete all as specified. 61 S&F in repair plug top 5 Amps,3 pin,230 volts complete all as specified. 62 Supply fix in repair recess mounting LED panel 12 W 160mmX160mm luminaire white/worm powder coated CRCA housing with LED seamless front frame with flat white high transmission acrylic cover. 63 S&F in repair hylam sheet of size 20X10 CM 3mm thick, white complete all as specifed and directed by Engr-in-charge. 64 S&F in repair plastic body exhaust fan 250mm sweep AC, 240 Volts fixed as per manufacturer instruction, connection with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable including provn of hole and frame etc for fixing the fan as required at site complete all as specifed and directed by Engr-in-charge. 65 S&F in repair LED light fitting 10 Watt bulk head luminaire, complete with all accessories and including connection up with1.5 Sqmm three core copper conductor PVC insulated and PVC sheathed comete all as specfied and directed. 66 Deduct Credit for Demolished/Dismantled material Rs (-)59,445.00 (Minus) as listed in Schedule A Part-II (Credit Schedule)Note :Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the Contract Sum.
Contract Date: May 12, 2026 Contract Value : ₹ 39.54 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 11
Jammu And Kashmir View Result →
19.
Defence #9839238 AOC
Bids Are invited for Frame 10 Inch Mark 4 - Carbon Fibre Frame 10 Inch Compatible With Geprc, Top Plate 4 Mm Aluminium Standoff (30Mm) Arm Bar 5 Mm For Heavy Load Flights. , Motor 900Kv 3115 - Brushless Motor 3 To 185 Rating 900 Kv, Compatible With Li-Po Bty. , Propeller 10 Inch Triblade - Fpv Drone Propeller 1507 Glass Fiber Nylon 3 Blade (2 Pairs Cw + Ccw). , Digital Vtx Camera With Antenna - Digital Vtx With Night Vision 4K Resolution Field Of View 3600 With 5.8 Ghz & 900 Mhz. , Fpv Goggles - Light Weight Portable Fpv With Micro-Oled Screen Video Transmission, Hd Low Latency, Compatible With 5.8 Ghz Band. , Remote Controller - Remote Controller Support Firmware Edgetx/ Openty 16 Channels, Range Upto 10 Km Frequency Band 2.4 Ghz. , Elrs Receiver - Elrs 2.4 Ghz Nano Receiver Module, With Dual Antenna Rf Output 200 Mw Speed 1000 Hz To 2000 Hz Power Source 5V. , Dropping Mechanism - Alloy Release Device Made Of Aerial Aluminum (Cnc) Light Weight Silver Colour. , Servo Motor - Metal Gear Servo Motor Rds5180, 80 Kg High Torque & Rc Needs & 1800. High Performance Digital Servo Motor. , Flight Controller - Fc Input Voltage 7.4-26V (2-6S Lipo) , Battery 12600 Mah - Bty 12600 Mah Li-Ion Bty/ 10C To 13C 6 Cell, 22.2V For Fpv Drones Light Weight. , Gps M100 - Gps M100 Pro 10Th Generation Chip Compatible With Fpv & Fixed Wing Uav Receiving Channel Is Expanded To 120 Channels. , Landing Gear - Fpv Landing Gear 3K Matte Carbon Fiber + Cnc Aluminum With Mount Total Quantity : 19
Contract Date: Ref. Documents Contract Value : ₹ 1.00 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Uttar Pradesh View Result →
20.
Educational and Research Institute #9832816 AOC
PROCUREMENT OF MACHINERIES, INSTRUMENTS, TOOLS AND EQUIPMENTS ETC. RELATED TO ELECTRICAL ENGINEERING AND ELECTRONICS AND TELECOMMUNICTION ENGINEERING LABORATORIES AND WORKSHOPS OF MATHABHANGA GOVERNMENT POLYTECHNIC, MATHABHANGA, COOCH BEHAR, WEST BENGAL- 1 ANALOG ELECTRONICS LAB-I (3RD SEM) 2 50 MHz Dual Channel CRO• Automatic Measurements of Signal Parameters like .Pk-Pk, Average, Max. , Min., rms, top etc. Voltages and Frequency, Period,Width,Duty Cycle, Rise Time, Fall Rime • Waveform and Set up storage facility.• Colour Display. • Advanced features like sequential acquisition of up to 1000 trigger events should be possible.• Standard USB Host & Device Connectivity. • Standard 23 Automatic Measurement andMath Function Including FFT.• Education student Lab guide and professor slide set.DETAILED TECHNICAL SPECIFICATIONS:-a)No. Of Channels:2b)Bandwidth :50 MHzc)Maximum Input:400 V (peak ac + dc) d) Sample Rate :1 GSa/sece)Waveform Update Rate : 400 Waveforms/secf)Memory : 16 Kpts/Ch.g)Time Base : 5nsec / div. To 50 sec./div.h) Resolution : 8 bitsi) Display: 5.7 inch Colour QVGA TFT LCD Display.j)Trigger Modes: Force, Edge, and Video, Pulse width.k) Built In Interface : Standard USB 2.0 (Host and Device)l)Power Supply: 230 V AC Supply, 50 Hz. 3 Function Generatori)Itshould be a waveform / function generator which can be upgraded to an arbitrary waveform generator . It may also have the feature upgrade the frequency of operationii) Should have low harmonic distortion and jitter.DETAILED TECHNICAL SPECIFICATION:--• Frequenc : 1Hz. to 20 MHz for Sine , Square and PulseWaveforms and 1 Hz. to 20 MHz. for Noise• No. of Channels: 1• Frequency Resolution : 1Hz.• Amplitude : 1 mVpk-pk to 10 v (pk - pk) in 50 ohms. • Duty Cycle for Pulse : 0.01 % to 99.99 %• Standard Waveforms: Sine,Square,Ramp,Pulse,Triangle,•Operating Modes: Continuous,Modulate,. .• Modulation Types: AM,FM,PM,FSK,BPSK,PWM• AM : Source both Internal & External, Depth 0 to 120 %With 0.01 % resolution.• FM : Source both Internal & External, Deviation 1Hz to 15 MHz• PM: Source both Internal & External, Deviation 0 to 360 deg C.• PWM : Source both Internal & External. Deviation 0 % to 100 %.• Power Supply : 230 v,50 Hz. ac. 4 Digital MultimeterDC Voltage:400mV to 1000V , AC Voltage: 400mV to 1000V,DC Current: 4mA to 10A, AC Current: 4mA to 10A, Resistance: 100 ohm to 40Mohm, Resistance: 100 ohm to 40Mohm,Capacitance: 4nF to 200µF, Duty Cycle: 0.1% to 99.9%, Frequency: 10Hz to 10MHz, Temperature: 20oC to 750oC,Transistor Test: Yes (for NPN & PNP), Diode Test: Yes, Continuing Buzzer: Yes, Power Supply: 9V, Manual and Auto ranging,Display: 4½ Digit 5 To study the V-I characteristics of UJT Trainer kitVariable DC Power Supply 1.2V to 12V/500m,A DC Power Supply for DPM 5V/500m,A UJT (2N2646) UJT Characteristics UJT Relaxation Oscillator with two different Timing Capacitors ,DigitalMeters for Measuring Voltage and Current ,Set of Patch Chords & User Manual 6 To study the input and output characteristics and to find the h-parameters of a BJT for : —(a) C-E configuration,(b) C-C configuration,(c) C-B configurationHARDWARE SPECIFICATIONS :Dual Variable DC Power Supplies 0V to 12V/500mA and0V to 15V/500mA DC Power Supply for DPM 5V/500mAIndependent Base Limiting Resistors - 2 Nos.(low value) Independent Collector Resistor - 1 No. Transistor( NPN Type SL100) .All Inputs/Outputs through 2mm Sockets set with provision of Digital Multimeter for measuring input and output. 7 ANALOG ELECTRONICS LAB-II (4TH SEM) 8 Feedback Amplifier Trainer12 V DC supply with +/- 10%accuracy,configurable circuit,Inbuilt sine wave generator with frequency range 10 Hz to 10 KHz rangeand Amplitude variation 10mV to 4V, NPN transistor. Voltage Series & Shunt and Current Series & Shunt configurable operation. 9 Oscillator Trainer KITi) Hartley, Colpitt ,Wien Bridge Oscillator Trainer kit : i) NPN Transistor ii)On boardoscillator section,separate tank circuit (iii)Biasing Voltage :+12 V , -12 V ,+12V SMPS Adaptor provided with the trainer for power supply.Designed by considering all the safety standards. Provided with an extensive manual.Power Supply to Kit: 230VAC,50Hz, All interconnections are made using 2mm banana Patch cords 10 To determine the following characteristics of op-amp: —a) input offset voltage, b) slew rate, c) non-inverting gain, d) inverting gain e) adder, f) subtractor, g) differentiator, h) integratorandi) voltage followerTo adjust offset null, setup the closed loop amplifier using IC741 op-amp also to (a) dc gain (b) ac gain. The set complete with +/-12V DC regulated power supply with milli voltage source, Null arrangement and 2V/20V dual range digital voltmeter , In built sine wave,triangular wave & square wave Generator of1 KHz, 15V Vpp (approx.), DC Power Supply : 0 - 5 V (vary through (2No.) rotary switch for specific voltage level 11 DIGITAL ELECTRONICS LAB (3RD SEM) 12 Complete setup to implement encoder, decoder ,multiplexer andde-multiplexer5V D.C. at 100mA, IC regulated power supply,21 Input Switches for data input,IC For Multiplexing 74150 is provided on board with Combinational Circuit, IC For Demultiplexing 74154 is provided on board with Combinational Circuit, One Not Gate is provided on board using 7404 ,16 Output LEDs with driver circuit to observe the output of Multiplexer Demultiplexer, A Pulser to provide the pulses manually for triggering,230 V ±10% at 50 Hz A.C. Mains,necessary patch cords and user mannuals. 13 Complete setup to design / construct parity generator, checker andcomparatorDC Regulated Power Supply 5 VDC/150 ma,5 SPDT switches provided for selecting logic ‘1’ & logic ‘0’,2 output indicators,Sufficient no of 4mm Patch Cords for Interconnection,Power Cords 230v, 50Hz,necessary patch cords and user mannuals. 14 Complete setup to design / construct binary synchronous and asynchronous counterTrainer kit for binary Synchronous and Asynchronous counter. with power supply, display unit, patch cords, manuals and necessary IC. 15 Digital I.C TesterUniversal IC tester: 40 pin DIP ZIF socket, 50 cherry keys Key pad and 16 X 2 LCD Display, suitable for testing of Analog IC, Digital IC and 7-segment display. 16 A/D & D/A Converter TrainerFEATURESAnalog To Digital Converter• 8-bit descrete ADC•12-bit monolithic ADC IC•On-board signal generator with adjustable amplitude levels•On-board LED bank to observe digital outputs•Power supply : +5V, ±12V GND•Interconnection is provided by 2mm connectors•Experimental manualDigital To Analog Converter•8-bit binary weighted resistors DAC•8-bit ladder type D to A converter•8-bit D to A converter using monolithic IC•Simple construction using Op-Amp and resistors•Onboard switches are provided for digital pattern generation•8-bit digital inputs ranges from 00 to FF•Variable frequency counter to study the settling timeSPECIFICATIONS•8-bit binary weighted and 4-bit ladder type DAC are constructed using discrete components•8-bit monolithic DAC having settling time in the range of ns, wide power supply range, low power consumption, full scale error ± 1LSB•8-bit digital ramp ADC constructed using discrete components•12-bit monolithic ADC having conversion time in the range of μs, industry standard pin out, wide input range•8 onboard switches to provide digital inputs to DAC•8-bit counter running on external clock frequency to study settling time of DAC• Built inlow frequency clock generator•1 KHz sine wave with adjustable amplitude level•Onboard variable DC voltage source for studying unipolar and bipolar modes of ADC •12 output LEDs to observe ADC outputs•ADA operates on DC power supply (+12V,-12V,+5V and GND)•Interconnection is provided by standard 2mm connector•Extensive experimental manual is provided with the kit EXPERIMENTSAnalog To Digital Converter• To study and measure resolution of ADC•To measure the conversion time of the ADC•To study full scale adjustment for unipolar and bipolar signals•To study the working of ADC 17 NETWORK ANALYSIS LAB ( 3RD SEM) 18 To study the series and parallelresonant circuitIndependent Resistors - 3 Nos. ,Independent Capacitors - 3 Nos.,Tapped Inductance. All Inputs/Outputs through 2mm Sockets Set of Patch Chords & User ManualWITH SIGNAL GENERATOR, COUNTER, DIGITAL METERS FOR INPUT & OUTPUT and user manual 19 To test and to measure the cut –off frequencies of the following: —(a) constant k-type low pass filter;(b) constant k-type high pass filterTwo Independent Passive LC Filter Networks (LPF & HPF) All Inputs/Outputs through 2mm SocketsSet of Patch Chords & User Manual 20 To study standing wave pattern for a transmission line of finite length with:(a) open termination,(b) shorted termination andmatched termination. 2.To measure the attenuation constant and phase shift constant for matched terminationTransmission Line Trainer Features:* 30-300 Mhz sweep source with detector* Calibrated attenuator* Displays standing waves/maxima-minima on CRO* Uses actual coaxial lines rather than simulated ones.* Impedance matching.* Measures VSWR, reflection coefficient, characteristic impedance, velocity of propagation, dielectric constant and signal attenuation in TDR.* Measure parameters of 50, 75 and 300 Ohms cables* Study Time Domain Reflectometry.* Study location and nature of discontinuities,Open/short, mismatched terminations, etc.* Offers a complete view of the transmission line in analog and digital domains, which is essential for complete understanding of transmission line behavior.Technical Specifications:A. Frequency Domain AnalyzerFrequency range : 30-300 MHz typical LCD Display. Level : 100mV p-p Attenuator 50 Ohms : 0.5, 1, 2,4, 8,15 dB,Output Impedance : 50 Ohms Scope out : X-Y output to scopeB. Resistive Impedance Analyzer ,Characteristic Imp. : upto 800 ohms ,Display : LCD C. Time Domain ReflectometerPRR Short range : 10MHz typical,Pulse width : <10ns typical, PRR Long range : 100KHz typicalAmplitude : 1V nominal, Output Impedance : 50 OhmsAccessories:Lengths of 50 ohms and 75 ohms coaxial cable, 300ohms, parallel line, lossy line, Tee connectors, ,Standard load of 50and 75 ohms, Various capacitive and inductive loads, shorts, Balun 1:1 & 1:4, Operating manual, Mains cord 21 COMPUTER PROGRAMMING LANGUAGE LABORATORY (3RD SEM) 22 Computer Programming Language LaboratoryTURBO C++ Software 23 MICROPROCESSOR LAB (4TH SEM) 24 8085Microprocessor Trainer KitHigh performance 8085A CPU operating at 3 MHz.16 K powerful monitor FIRMWARE expandable to 32 K. 64 K user RAM. Expanded RAM accessible using bankWrite protect facility for RAM. 3.6 V Ni-Cad battery back up. Versatile Keyboard/Display controller using 8279. 24 highly reliable dual function keys. 6 digit seven segment LED display.Parallel I/O lines available through two 8255 chips. Serial I/O through 8251 USART, with on-board level shifters 1488,1489.Programmable communication parameters. Built-in audio cassette interface.3 channels of 16 bit timer/counters from 8253.Powerful 8085 interrupt capabilities. On-board EPROM programmer with ZIF socket for programming 2716 to7512 EPROMs and various EEPROMs. Normal and intelligent programming modes.On-board ADC,DAC, opto-isolator, reed relay and miniature speaker. On-board logic probe.Single stepping, break pointing and machine cycle single stepping facility. Monitor functions can be called through software interrupts. Large collection of application software provided. All address, data and control lines from the CPU, buffered and brought out on 50 pin connector. Additional Stepper motor of specification:Shaft type: 5 mm DCurrent rating: 1200 mA2Voltage rating: 4 VHolding torque: 44 oz·inSteps per revolution: 200Resistance: 3.3 Ohm2Inductance per phase: 2.8 mHNumber of leads: 6Lead length: 30 cm 25 Microprocessor 8086 Trainer KitINTEL 8086CPU AT 4.77 MHZ CLOCK SPEED,16KB for monitor EPROM upgradable to 64kb16KB RAM expandable to 64KBBattery backup provision for RAM upto 64KB16 x 2 (or) 20 x 4 Alphanumeric LCD display101 keys IBM compatible keyboard24 TTL I/O lines brought out to two nos., of 26 pin FRC connector1 number of standard RS232C compatible serial port brought out to a pin D type male connector.3 channel 16 bit counter/timer using 8253.Fully buffered address data and control signals terminated at a 50 pin header(VXT BUS) for interfacing VBMB seriesof experiment boards and bus expansion.8 no’s of interrupt lines are terminated at a 10 pin connector.Kit operates with a single +5V/DC supplyThe kit and the power supply are mounted on a attractive light gray color fiber glass cabinet with fiber glass top cover.Built-in line assembler & DisassemblerPowerful debugging monitor to develop user program. 26 ELEMENTARY COMMUNICATION ENGG. LAB 27 To study the amplitude modulation and demodulation Ttrainer kit Features of Amplitude Modulation and Demodulation Trainer:On-board message signal with variable Amp/Freq On Board carrier signal with variable Amp/Freq AM Modulation using MC 1496 IC Demodulation using Diode Detector and LPF,6th Order LPF,Op Amp Based Variable AmplifierInternal Power Supply +5V , +12V/ 500 mATechnical Specification :Message Signal:Sine wave Frequency 100 Hz to 2.8 KHz, Amplitude 0 to 3VCarrier Signal: Sine wave Frequency-28 KHz to 108 KHzAmplitude 2V,Modulation : Balanced ModulatorAmplifier : Op Amp BasedDemodulation : Diode Detector & LPFLow Pass Filter : 6th Order LPFSupply Voltage (Board) : +12V, +5V / DCSupply current : 100 mA (Minimum)Input Voltage : 230 V/ 50 Hz ACInterface connectors : 2mm socket 28 AM/FM Radio Receiver kitFrequency range: 400KHz ~ 1.5MHzIntermediate frequency: 455KHzInputs: RF signalOutput IF frequency: 455KHz adjustableIF filter: Dual tune LC, RF amplifier with variable gain ,Mixer (frequency converter),Local oscillator:Output Signal: Sine waveFrequency range: 400KHz ~ 1.5MHz ,Amplitude: Adjustable from 0Vpp ~ 2VppOutput impedance: 50 Ohm ,1st and 2nd IF amplifierCentral frequency: 455KHz, Load impedance: Variable R-L-CGain: 40db with automatic gain control, Diode envelope detectorDetection of the envelop with variable RC filter. Audio output:Amplifier with audio jack, Audio amplifier gain: 26Db, Receiving media :MW coil antennaFM radio receiver, Reception range: 88MHz ~ 108MHz with continuous tuningTuning circuit: Using GANG capacitorIntermediate frequency: 10.7 MHz with ceramic filterEXPERIMENTS:Study of double sideband AM reception using envelope diode detector,Study of single sideband AM reception using product detector,Study of image frequencies,Study of adjustment of receiver tuned circuits,Voice reception using DSB/ SSB AM receiver (super heterodyne receiver)Effects of switch faults FM detection output level: 77.5Vrms (typical)FM detection output distortion factor: 0.3% (typical)Audio amplifier: Gain up to 46DbReceiving media: Adjustable telescopic antennaPower supply: -12V,+12V,+5V,GNDOutput volume regulation, output load impedance of 8 OhmEXPERIMENTS AM radio receiverTo study AM radio receiverTo study of image frequencies for AMFM radio receiverTo study FM radio receiverTo measure the frequency response of Audio amplifier 29 Pulse code Modulation and Demodulation system trainerInbuilt variable DC and 1 kHz AC Modulating Signals, Facility for applying external AC or DC Modulating Signal, Modulating circuit consists of a Positive Clamper, Sample and Hold (S and H), Analog to Digital Converter (ADC), Parallel to Serial Converter and Control Signal Generator, Observation of binary coded analog information by the LED status for both Modulation and Demodulation, PCM Modulation technique using IC, Built-in Pulse Code Demodulation circuit using a Serial to Parallel Converter and Parallel Shift Register DAC, Low Pass Filter for both AC & DC, Observation of Modulated & Demodulated waveform, Provision to monitor output on CRO, Clock to be provided from the Pulse Code Modulator to Demodulator circuit, Built-in IC based DC Regulated Power Supply with indication for power ON & fuse, 4 mm Patch Cords – 4 nos, Supply required 230V, 50 Hz and 1 phase AC, Comprehensive instruction manual complete with theory and operating details. 30 Frequency Modulation andDemodulation kitFM Modulators :Audio Oscillator : Sine wave (10Vpp adjustable) Frequency (300 Hz - 3.4 KHz) FM Modulators : 3 nos. • Reactance Modulator : Carrier Frequency - 455 KHz (± 3KHz) Varactor Modulator : Carrier Frequency - 455 KHz (± 2KHz) VCO Based Modulator : Carrier Frequency - 10 KHz - 200KHz (adjustable) ,Mixer / Amplifier adjustment FM Demodulator:Detuned Resonant DetectorQuadrature DetectorFoster-Seeley DetectorRatio DetectorPhase-Locked Loop Detector (IC HEF4046 based)Phase-Locked Loop Detector (IC LM565 based), Low Pass Filter : 3.4 KHz Cut off Frequency Amplifier (with adjustable gain) 31 DPCM & ADPCM MODULATION / DEMODULATION KITDPCM & ADPCM MODULATION / DEMODULATION KITOn Board Signals:. Frequency: 500KHz, Amplitude: 0 to 4 v pp 32 CONSUMER ELECTRONICS LAB (4TH SEM) 33 Black & White TV Trainer kit with provision of fault findingSystem: CCIR-B, 625 lines, Power supply :230V Ac, 50 Hz, Regulation range170v Ac to 270v Ac.,Power consumption :70 watts,Gain Limited sensitivity:55 dB for Video & 25 dB for AudioSound output :2.0 watts maximum. Screen size :20 Diagonal. Channel :VHF 2 to 12, UHF 21 to 68,S-band and Hyper-band. Isolated shockproof chassis. Sections:Electronic tuner, VideoI.F Section, Sound I.F, Video amplifier, Horizontal oscillator, Horizontal driver and EHT, Verticaloscillator, and output, S.M.P.S power ,Controls: Volume, tone, Brightness, contrast. Distortion :10 to 15% in Live program due to expanded P.C.B. All parts are soldered on Tags on SINGLE PCB of size 19x15” with complete circuit diagramSCREEN PRINTED in different colors with FAULT CREATING FACILITIES to create more than 25 faults. Standard Accessories : 1. Frame with PCB mounting.2. Picture tube fitted in wooden cabinet 3. A Manual having 20 practical. 34 DTH TV and SET TOP BOX TRAINER KITPower supply 230 V ,50 Hz, Input frequency: KU Band, Output frequency: 950-1450 Mhz.Noise temp: 35 degree,DISH ANTENA ,LNBIF FREQUENCY: 70 MHz 35 Colour TV Trainer with provision of fault findingStandard : CCIR-B-PAL-G, 625 Lines Channels : 230, 2 - 4 VHP I (VL), 5 - 12 VHP III (VH), 12 - 100 : BAND IV & V, else : S BAND & HYPER BAND Picture Tube Size : 36 cms. Diagonal RF Input Impedance : 75 W (Ohm) 36 DIGITAL & MICROWAVE COMMUNICATION ENGG. LAB 37 Spectrum AnalyzerFrequency range:9 KHz to 26.5 GHz,Phase noise :-102dBc/Hz, Max third order dynamic range, 1 GHz: 111dB, Displayed average niose level,1GHz:-163dBm,Standard attenuator range/step:50dB/10dB,70dB/10 squaredb,Overall amplitude accuracy:+/- 0.50dB 38 Antenna Trainer 86 - 860 MHZSPECIFICATIONS:Radiation pattern plotting software• Stepper motor controlled receiver stand.Antenna Measurement System:RF Source•Source types :PLL Synthesized with integrated VCO• Frequency range :100MHz to 3GHz• Dynamic range :85dBm• Transmitted power min:-50dBm• Transmitted power max:+5dBm • Impedance :50W / SMA RF Detector• Detector type: logarithmicdetector• Frequency range : 1MHz to 8GHz• Resolution: 0.1dB• Dynamic range : 85dB (±3dB)• Noise level : -90dbm• Impedance: 50W /SMA• Representation of RF level : dBmDisplay•128x64 Graphic LCD Display with backlit. Keypad•15 Key Membrane Keypad for user entry.Stepper motor controller•1.80 Resolutions.List of Standard 22 Antenna Suppliedwith the setupWire Antenna1.Monopole Plane base ground2.Dipole (2nos.) 3.Yagi4.Folded Dipole 5.Vee Dipole6.Rectangular Loop 7.HelicalMicrostrip Antenna 1.Planar Dipole 2.Planar Monopole3.CMSA 4.TMSA5.2X1 ARRAY 6.Annular ring7.Chip Antenna8.RMSA9.RMSA- Circular PolarizedAperture Antenna 1.E- Horn2.Open ended Waveguide Rectangular Array Antenna 1.Broadside Array2.Collinear ArrayReflector Antenna 1. Corner reflectorSOFTWARE• Radiation pattern plotting and analysis software suitable for windows environment Antenna PositionerThe Transmitter and Receiver Antenna stand is made of special material which is inhert to EM frequency and it has engraved height and angle scale on It. It has facility to adjust the height and level. Universal plug and fix Antenna mounts are provided to hold the antenna assembly in vertical and horizontalorientation for co and cross polarization.ACCESSORIES • SMA (M) to SMA (M) 50W flexible cable : 02nos• USB cable ( Male A to Male B): 01no• 3 Pin 6 Amp Power chord: 01no • Manual : 01no • Software on CD: 01no EXPERIMENTS• Measure the variation of field strength /inverse square law• Prove the reciprocity theorem of antenna• Plot Radiation pattern of WIRED Antenna Omni directional antenna• Plot Radiation pattern of all Aperture Antenna• Plot Radiation pattern of all Reflector Antenna• Plot Radiation pattern of all Array Antenna• Measure co-polarization, cross polarization 39 Microwave Test Bench (KLYSTRONBased)Klystron Power Supply: Specifications:Input Voltage -230V+/- 10%, 50Hz AC, Beam supply- Voltage:200-450V continuously variable; Current:Regulation: better than 0.5% for +/-10% variation in mains supply voltage; Ripple: less than 5mV rms ,Repeller Supply -Voltage:-10V to -270V continuously variable with respect to klystron cathodeRegulation: better than 0.25% for +/-10% variation in mains supply volt , Heater Supply - 6.3V DC (regulated)Modulation- Square Wave : Frequency 500Hz to 2000Hz; Max. Amplitude- +110V peak to peak, Amplitude and frequency continuously variable; Sawtooth- Frequency 50Hz to 150Hz; Max. Amplitude- 60V peak to peak, Amplitude and frequency continuously variable.VSWR Meter: (Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Power : 230 Volts AC, 50Hz, mains supply) 40 ASK / PSK / FSK Modulation And Demodulation KitFEATURES•VLSI based design •Separate component and operational area •Acrylic cover for component safety •Modular organization of circuit functions •Test points to access signals at every stage of circuit operation •Multimedia based interactive e-manual Data Simulator: Onboard 8-bit variable NRZ-L pattern,Crystal Oscillator: 32.768 MHz,Data Clock: 256 KHz,Data Format: NRZ (L),Onboard Carrier Sine Waves : 1MHz (0°), 1MHz (180°), 500 KHz (0°),Power Supply: +12V, -12V, +5V, GND. 41 Microwave Test Bench (GUNN Based)Gunn microwave test bench:Gunn Power Supply (0 - 12 Volts variable,1 Amp. Max,Modulation Frequency: 1KHz +/- 10% (900-1100 Hz),Output Connector: BNC(F) for Gunn Oscillator & TNC(F) for Pin Modulator,Modulation: Square Wave, Frequency : 500Hz to 2000Hz)• Gunn Oscillator • Isolator• PIN modulator• Variable attenuator • Detector Mount• SWR meter(Sensitivity: 0.2 micro Volts at a 200 ohm input impedance for full scale deflection, Noise level: At least 5 dB below full scale at rated sensitivity and maximum, bandwidth with input terminated in 100 ohms and 500 ohms for low and high respectively, A/C output : BNC Connector for amplified output, Frequency : 1000Hz +/- 10%,Powe : 230 Volts AC, 50Hz, mains supply) 42 1 GHz spectrum Analyser1 GHz spectrum Analyser with tracking generatorFrequency range: 150 KHz to 1000 MHzFreqency Resolution: 1 KHz CF entry 40 Hz sweep resolution at 2 KHz per Division,Frequency Display: 61/2 digitFrqency Control: Digital Phase LockResolution Bandwidth: 3 KHz, 30 KHz, 220 KHz, 4 MHz. 43 INDUSTRIAL ELECTRONICS LAB -I (5TH SEM) 44 Trainer Kit to study Reverse Recovery Characteristics of Power DiodesThe single Board trainer Kit should contain IC Regulated Power Supply, Different types power diodes, Digital Ammeter and Voltmeter and other necessary passive components 45 To study drive circuit of SCRIsolated 230 V/40 W AC Power Supply1.2 V to + 15 V/500 mA DC Power Supply* 0-18 V/500 mA,50 Hz, AC Power Supply* Variable frequency triggering pulses* DC Gate signal control, Pulse gate signal * Synchronous AC gate control signal through DIAC* UJT Triggering* 10:1 On- board resistive attenuator * Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 46 To study a single phase rectifier—output waveform with phase control circuitTrainer Kit to study Single Phase Full wave Bridge Rectifier for fixedDC output, Half Controlled and fully controlled rectification facilities with R and RL, loads 1000 Ohms 10 Watts, 14 ma @ 0.05 A inductive loads.The Single Board Trainer Kit contains :(i) Source for rectification of 4 to 24 V DC fixed and variable output @ a max of 500 ma helps to construct and study Series and Parallel resonance Circuit.(ii) Four Diodes and 4 SCRs in bridge configuration with gradual firing controls and necessary capacitive, inductive and Pie filter components.(iii) Digital Ammeter and Voltmeter. 47 To study a polyphase rectifierIsolated 230 V/40 W AC Power Supply Isolated stepped down 3 PH supply. * 3 Phase diode rectifier in open condition*Provision for Load& CRO output.* Electronic phase sequence finder.*Set of Patch Chords & user Manual 48 INDUSTRIAL ELECTRONICS LAB-II (6TH SEM) 49 Servo Regulator Stabilizer Study Kit500VA Servo stabilizer , 2 Amp Variac, Digital input & output meters, Lamp load, Set of Patch Chords & userManual. 50 To study a Jones chopperIsolated 230 V/40 W DC Power Supply, + 5 V/500 mA DC Power Supply* SCR Jones chopper* Gate firing pulses for Jones Chopper* 10:1 On-board Resistive Attenuator* Provision for 40 W Lamp Load* Set of Patch Chords & userManual. 51 To study speed control of induction motor by voltage and frequency variationV/F CONTROLLER 1 HP, AC SQ. CAGE IND. MOTOR 1 HP,DIGITAL VOLT & AMMETER. 1 PHASE I/P & 3 PHASE O/P,3 PH & 1PH MCB PROTECTION 52 To study the speed control of DC motor by:(a) varying field current keeping armature voltage constant; and,(b) varying armature voltage keeping field current constant DC SHUNT MOTOR (FULL COPPER WINDING) .5 HP WITH BASE MOUNT FRAME 1 No VARIAC CONTROLLED 2 DC POWER SUPPLY ( 1 FOR FIELD & 1 FOR ARMATURE)DC VOLT & AMMETER DIGITAL………4 NosPANEL MOUNTED RPM METER………1 No.WHITE BAKELITE FRONT WITH CONN. DIAGRAM & WOODEN SAFETY BOX.METAL FRAME TABLE (Ply board with sun mica) CUM STAND FOR PANEL 53 Power Electronics Devices Trainer KitShould have Built in power supplyDC supply : +/- 12V, 500mA,Power supply 17V / 750mA,Regulated 13.5V/3A O/P mustbe provided as 12V Battery charging supply. Isolated DC supply +12V/ 300mA with isolated common.On board Inverter transformer of Primary : 230V & Secondaries 12-11-0-11-12/3AOn board Lamp load of 15W (100W) should be provided.AC supply : 230V AC line voltage must be made available on two banana 4mm socketsMust have Two pulse transformers of 1:1:1 are provided for isolation & supplying firing pulsesalong with required DC Power supply to experiment panel under test through 15 pin female ‘D’connector.R-L-C Load PanelMust have Load resistor of 10W / 40W --- 1no.Must have Centre tapped 3A choke 4mH/ 16mH each ----2nos.Must have Commutation capacitors of 10mF/100V -------4nos.Must have AC Paper capacitor of 4mF/440V ---1no. 54 PLC Trainer (EXPERIMENT 1-Use of simulation package for different function of PLC. EXPERIMENT 2- Verify function of logic gates by using PLC. EXPERIMENT 3- Write and verify ladder program for motor ON-OFF Control with two push button)HARDWARE SPECIFICATION:TTL Input Switches : 8 Nos,TTL Momentary Switches : 8 Nos., Proximity Switch : 1 No.,Optical Transducer (two state) : 1 No., Programmable LEDs : 8 Nos., Analog input 0 to 5V DC : 8 channels, Analog output 0 to 5V DC : 1 No., 4 to 20mA Transmitter : 1No., 4 to 20mA Receiver : 1No., Current Meter : 25mA FSD 1No.,Voltmeter : 10V FSD 1 No., Piezo Electric Alarm : 1 bit.Built-in power supply.Dedicated I/O interface card suitable for IBM computer suitable for ISA slot. SOFTWARE SPECIFICATION:This is a GUI based LADDER LOGIC SOFTWAREDRAG AND DROP (D&D) an instruction instead of typing an instruction. This eliminates errors in typing. All the instructions are displayed ON-SCREEN during Design time. Each and every element is directly addressed with their NAMES not by numbers or codes, which are very difficult to remember. Ex: At design time, you call a SWITCH#0 in your Ladder program by D&D the component called SWITCH#0, and that’s it, not by typing a few digits numbers or codes.Appropriate LIST boxes (input, output) open as you D&D an instruction in LADDER WORKSPACE.Ladder workspace is 24X100 instruction CELLs are available for your use.TOOL TIP features are available at the end of each instruction prompting you “what to do next”Very user friendly.Extensive ON-LINE HELP menu available.GUI based STATUS of the entire PLC is displayed during RUN TIME.Programs are saved, retrieved, edited by simply clicking on Menu list box.Extensive EDIT features are available. 55 Power Electronics Development TrainerSize of Breadboard : 172.5 mm × 128.5mmDC Power Supply :+5 V, -5 V 500 mA,+12V, -12 V 500 mA+15 V, 250 mA+35V, -35V, 250 mAAC Power Supply :18V-0V-18V ,0V-15VOn board Firing CircuitsFrequency range : 30Hz to 900Hz variableAmplitude : 12VPWM control of G1, G2, G3 and G4Duty cycle control of “Gate”Signal is 0 to 100%SCR Assembly : 4 SCRs 2P4M, 400V/2APower Devices : IGBT-G4BC20S, MOSFETIRFZ44N,UJT-2N2646, DIACDB3,TRIAC-BT136, PUT-2N6027Circuit Components on board : Electrolytic Capacitor 10µF, 63V,Electrolytic Capacitor 1µF, 63V ,Met. Capacitor 0.33µF, 63V ,Diode 1N4007, Inductor 220uH, 4.7µH, 10mH.Pulse transformer on board :2 nos. PT4502 1:1 and one is PT4503 1:1:1Load selector : 6 load resistances- 47E/7W,1K/1W, 1K/10W, 10K/10W,120E/5W, 2K2/2W.Test points : 10 nos (Gold plated)Power Supply (Mains) : 220V/110V, 50Hz/60HzIncluded Accessories :Bread boards : 2 nos.Connecting wires : 20 nos.2mm to 1mm Patch cords : 15 nos.2mm Patch cords (Red) 16” : 4 nos.2mm Patch cords (Black)16’’ : 4 nos.2mm Patch cords (Blue) 16’’ : 12 nos.Mains cord : 1 no.with i) Power Semiconductor Application Experiment Panel ii)CON / INV Panel iii)Triggering circuit / dv/dt Protection panel 56 ELECTRICAL & ELECTRONICS MEASUREMENT LAB (6TH SEM) 57 Digital LCR meterVariable measured- L,C,R and loss angle (D factor ) Measured frequencies: 1 KHz, 100KHzDisplay: 3⅟₂ digit , Resistance: 0 to 20 MΩ, 0.1 Ω , Capacitance: 0 to 20000μF, 0.1 pF Inductance: 0 to 20000 H, 0.1μH ,D factor: 0.01 to 8.0 with 1% error 58 Distortion Factor MeterFrequency : 20 Hz to 200KHz Distortion:0.1% to 100% f.s.d. in steps ,Input sensitivity: 100mV (r.m.s.), Input impedance: 1MΩ/160pF, Voltmeter range: 300μv to 300v f.s.d. in 13 range 59 To measure L & Q by Maxwell methodFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 60 To measure the unknown capacitance by Schering bridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER & CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., DECADE INDUCTANCE WITH ROTARY SWITCH INBUILT, BACKLIGHT LED & WOODEN HARD BOX 61 To measure the unknown frequency by Wein BridgeFULL BRIDGE WITH OSCILLATOR, LED NULL BAR GRAPH & AUDIO AMPR WITH SPEAKER INBUILT FOR NULL IND., DIGITAL MULTIMETER WITH FREQ. COUNTER & CRO SIG. O/P INBUILT& CRO SIG. O/P INBUILT, IMPORTED (BOURNA) 10 TURN POT FOR NULL ADJ., BACKLIGHT LED & WOODEN HARD BOX 62 MICROCONTROLLER AND EMBEDDED LAB (5TH SEM) 63 Microcontroller Trainer Kit 1.Write a Simple Assembly Programs fora. Addition b. Subtraction b. Multiplication d. Division2. Write a Programs for (any two of the following)i. 4 x 4 Matrix Keypad Interfaceii. character based LCD Interfaceiii. Analog to Digital Conversion (On chip ADC)iv. Serial EEPROMv. Seven Segment LED Display Interfacevi. Interfacing With Temperature Sensorvii. Stepper Motor Interface8 BIT EMBEDDED MICROCONTROLLER TRAINERFEATURES•Single board design with various resources•Excellent training platform for embedded applications•Software development tools include assembler and ‘C’ compiler•Easy adaptability to different versions of microcontroller in the same family SPECIFICATIONS•Experimental board for 40 pin MCS51 and AVR family of microcontrollers•In-system programming (ISP) facility for many microcontrollers•Double RESET signal with manual key•Crystal frequency: 11.0592MHz•On-board RS232 compatible serial interface terminated in a 9 Pin D female connector•4×4 matrix keyboard•16×2 alphanumeric LCD connector (4-bit interface) and trimmer for contrast adjustment•Four 7-segment LED displays•I2C EEPROM (24Cxx)•Real time clock (DS1307) with lithium battery and SRAM•8-high current output port (500mA) for driving external loads•Two 12V sugar cube relays•Continuous tone piezo buzzer•Temperature sensor socket with thermostat functions•Four 8-bit A/D converter, one 8-bit D/A converter provided by PCF8591•All port-pins available on 10-pin box header•8 LEDs for easy logic state monitoring•8 input trigger switches using 8 push buttons•ISP programming with Flash ISP for AT89S51/52/8252/AVR•Infrared remote control receiver module IC supported•P89V51RD2BN•AT89S52 Installable software on CD•Programmers notepad : Free, open source, text editor•Flash ISP programmer software for 89SXX•Bascom basic compiler (demo version)•MIDE-51: An IDE for MCS-51 microcontroller•WinAVR : open source C compiler for AVR•Sample programs for peripherals DC 12V/500mA output power supplyEXPERIMENTS• Study of LED blink• Study of dancing light• Study of LCD display• Study of LCD-keyboard display• Study of 7 –segment display• Study of RC5 remote control test program• Study of analog to digital converter• Study of real time clock (RTC) 64 ADVANCE COMMUNICATION ENGINEERING LAB 65 To be familiar with the following network components:THIS WILL BE A FULL PACKAGE OF THE FOLLOWINGS:-** RJ5/CAT5CABLES 100 METERSRJ 45CONNECTORS 100 PCSCUTTER & CRIMPING TOOLS FOR RJ45/CAT-5CABLESCABLE TESTER/TRACKER…….. 4 PCSHUBS WITH ACCESSORIES & TOOL KIT NETWORK INTERFACE DIFFERENT CARD 66 COMPUTER NETWORK LAB 67 Network ComponentsCAT 5/5E/6 cable :100mtrs (Rs 2000/-), RJ 45 Connectors: 200pcs (Rs. 500/- )RJ 45 Crimping Tools: 05(Rs. 800/- each)LAN Cable Tester (RJ 45): 05 (Rs 1000/- each) 68 24 Port managed switchNo. of Ports: 10/100 Mbps 24 Ethernet ports, Switch Fabric: 32 Gbps, Form Factor: Rack Mountable,OS: LAN base Image, Console port: Availavble for configuration, Mac Address table: 4000 or higher, VLAN: Supported, MTU: 9100 with support for jumbo frames, Warranty: 3 years onsite comprehensive warranty including parts and labor plus onsite technical support with 24x7 69 24 Port Unmanaged switch24-port 10/100/1000Mbps Ethernet switch Wifi Router: 300 Mbps wireless router with 4 LAN ports and 1 WAN port 70 8 port HubExternal Power Supply, 8 Nos RJ-45 connectors for 10BASE-T/100BASE-TX,Ethernet Ports 8-Port, Capacity 1.6 Gbps, Wireless Speed 10 / 100 Mbps 71 Access points54 Mbps Access point for wifi network: No.of Channel: Dual channel for support upto 108 Mbps ( 2x54Mbps), Backbone connectivity: connect over Fast Ethernet through backbone switches, Security: Security enabled Wifi connectivity with option for Broadcast of SSID,Network:802.11 a/b/g/n network support, PoE: PoE enabled, Form factor: Wall or ceilling mountable with physical lock suppor. Warranty and support: 3 years on site comprehensive warranty including parts and labour plus on site technical support with 24 X 7 72 LAN TrainerEthernet (IEEE 802.3 wireless LAN (802.11),Token bus ( 802.4) Token ring ( 802.5), Data rate : 10/100 Mbps for ethernet, 1, 2, 5.5, 11 Mbps for wirless & LAN as per IEEE 802.11b, connectivity through RJ 45 connector. 73 Installation & commissioning of network(i) Laying ofOFC & CAT 6 Cable (ii) splicing (iii) Installation & network testing 74 INSTRUMENTATION AND CONTROL LAB (6th sem) 75 To measure displacement with LVDT ACTUAL LVDT WITHINSTRUMENTATION AMPLIFIERDC O/P WITH DIGITAL METER, 3and 1/2 digit LED display with polarity indicator, sensitivity of 10mV/mm in the range of 10mm. 76 To measure temperature with thermocoupleTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 77 To measure temperature with thermistorTHERMOCOUPLE SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 78 To measure pressure with strain gauge STRAIN GAUGE SENSOR WITH WAIGHT LOADING SYSYTEM SAMPLE WEIGHTS.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR 79 To plot the Characteristics of RTD (PT-100)RTD 3 WAIR SENSOR IN STEEL CASEELECTRIC WATER JAG.INSTRUMENTATION AMPLIFIER WITH DIGITAL METERCIRCUIT DIAGRAM PRINTED ON KITEXTERNAL MOUNTED ACTUAL SENSOR MERCURY THERMOMETER 80 Temperature controller with on-off controller, Temperature controller with PI controller, Temperature controller with PID controllerTemperature controller with facilities for P, I, D and relay control blocks, Operating temperature: Ambient to 90°C, Separate controls for P, I, D channel gains,Two settings for relay hysteresis, Fast 25W oven fitted with IC temperature sensor, Forced cooling option to ready oven for next experiment, Digital display of set and measured temperature on a 3½ digit built-in DVM, 0-9999 sec, timer on panel for a convenient temperature response experiment, Buffered output for recorder 81 CIRCUIT THEORY LAB 82 Determine the permeability of magnetic material by plotting its B-H curveHysteresis Loop Tracer/ BH Curve apparatus220volt AC, 50Hz supply 83 Series parallel resonance of R-L-C cktKit for Series parallel resonance of R-L-C ckt: The Set-up consist of Power supply (with variable frequency), audio oscillator with digital readout, digital RMS meters and different number of inductors (smoothly variable), capacitors, Rheostat, patch cord & manual. 84 SWITCH GEAR LAB 85 Speed control of Induction motor 1ph by using SCR3Φ, 400V ac, 50HZ.,1HP, 1440 rpm. Speed control using ac back to back configuration of SCRs and to note Speed vs. Load Characteristics at open loop condition. This unit should consist of AC 3Φ Induction Motor (1HP) coupled with a (i) DC Shunt Generator (1HP) for loading and (ii) a DC Tachogenerator to be used for speed feedback control. A DC meter must be provided for displaying the speed of the motor from the Tachogenerator with suitable AC Ammeter and Voltmeter for the measurement (AE Make Panel Type or digital) Sheet Metal enclosure with powder coating paint must be provided. (with foundation & Experiment Table) 86 C.T. & P.T. testing trainer kit C.T. & P.T.testing trainer kit - Variable AC voltage source (0-220V)& variable AC current source (0-25A), CT for 25/5A, PT for 220/110V, Autotransformer for voltage & current adjustment, MCB protection, To determine Ratio error, Phase angle error of CT & PT, with Burden box. , polarity check indicator , range selector switch. 87 Induction type electromagnetic relay* Over Current (IDMTL Electro- Mechanical Type , Model CDG-11 or equivalent) Relay,*PSM, TSM setting* Auxiliary Relay,* Counter /Timer,* D.W. Transformer, * Variac,* Knife Switch,* DC power supply for DC auxiliary relay and the relay,* Portable Ammeter.Necessary panel for the complete set up with wooden (teak wood) table (4x3x2.5) 88 Air Circuit BreakerCut section model 89 Transmission line protection simulation KitOver Current, Earth Fault, Over Voltage, Under Voltage, Directional, Differential, Distance protection 90 POWER PLANT LAB 91 Diesel generator power plantmodel of small diesel generator power plant 92 Hydro power plantmodel of micro Hydro power plant 93 Horizontal axis small wind turbinemodel 94 CSP plantmodel 95 MEASUREMENT LAB 96 Kelvin double bridgeCompletely self contained, stand alone unit with built in power supply, required meters, Standard Resistance, wooden bench, high sensitivity spot light type galvanometer, connecting patch chords and operating manuals. 97 RENEWABLE ENERGY LAB 98 Renewable Energy Labsolar PV plant- Model 99 Renewable Energy Labvertical axis small wind turbine- Model 100 ELECTRIC MACHINE LAB 101 VoltmeterVoltmeter (M.I type) 0-150V/300V/500V 102 VoltmeterVoltmeter (M.I type) 0-20V/50V 103 AmmeterAmmeter (M.I type) 0-5A/10A/20A 104 AmmeterAmmeter (M.I type) 0-1A/2A/5A 105 MultimeterAnalog Multi-meter of ISI marked: DC : 0-200 mV/ 1000 V & 0- 2mA – 10 A,AC : 0 – 200mV/1000V &0-2 mA – 20 A, Resistance : 0 – 200 Megaohm, with shock proof protection & other facilities and operatingmanuals. 106 MultimeterDigital Multi-meter of ISI marked: DC : 0-200 mV – 1000 V & 0-2mA – 10 A,AC : 0 – 1000 V & 0- 2mA– 20 A, Resistance : 0 – 200 Megaohm, with diodetesting, data hold, shock proof protection , auto power off etcfacilities and operating manuals. 107 WattmeterDynamometer Wattmeterof ISI marked : Low Power Factor ( 0.2 ) : Current Rating : 5/10 A , Voltage Rating : 150/300 / 600 V , with anti-parallax mirror , 120 mm scale length , knife edge pointer, mouldedBakelite body, portable. 108 VoltmeterVoltmeter (PMMC type) 0-150V/300V 109 AmmeterAmmeter (PMMC type) 0-2A/5A 110 StarterDC 3-point Starter : 220 V DC , 15 A 111 StarterDC 4-point Starter : 220 V DC , 15 A 112 DC Power SupplyDC Power Supply : Input : 415V, #-Phase AC, 50 Hz;Output : 220V DC , 5 KW of a standard make . 113 RheostatRheostat with sliding Jockey : 100 Ohm , 5 A 114 RheostatRheostat with sliding Jockey : 500 Ohm , 5 A 115 Digital Energy MeterDigital Energy Meter of ISI marked: Three Phase AC , 440 V , Maximum 30 A, 50 Hz with operatingmanual. 116 Digital MeggerDigital Megger for measuring insulation resistance of ISI marked: 250 / 500 V, Maximum 200 Mega ohmwith operating manual 117 VariacSingle Phase Variac of ISI marked : Input:– 230 V AC, Output : 0 – 270 V AC , 1 KVA, 50 Hzof a standard make 118 VariacThree Phase Variac of ISI marked : Input:– 415 V AC, Output : 0 – 500 V AC , 3 KVA, 50 Hzof a standard make 119 Clamp on MeterClamp on Meter of ISI marked : Digital type : For measuring Voltage ( AC/DC ), Current ( AC/DC ) , resistance, Power & Power Factor with operating manuals 120 Phase Sequence IndicatorPhase Sequence Indicator of ISI marked : 50 – 500 V AC, 25 – 60 Hz 121 Frequency MeterFrequency Meter of ISI marked: Digital Type : 240 V, 47 – 99 Hz 122 TransformerSingle-Phase Transformer : 1 KVA , 230 V/115V , 50 Hz( Air Cooled) 123 TransformerThree-Phase Transformer : 3 KVA , 415/230 V , 50 Hz 124 3-Ph Resistive LoadThree phase resistive load : 400 V , 6 KW 125 3-Ph Inductive LoadThree phase inductive load : 400 V , 3 KW 126 3-Ph Capacitive LoadThree phase capacitive load : 400 V , 3 KW 127 3-Ph StarterStar Delta automatic starter for 3 Phase,400 V, 5 Hpmotor 128 3-Ph DOL StarterDOL & Auto -Transformer Starter : 3-phase AC , 400V, 10A, 50 Hz 129 StroboscopeDigital Stroboscope - 10,000 rpm 130 DCGenerator Voltage build UPSupply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Building up Voltage in DC Generator ( Open Circuit / Saturation Characteristics: DC Shunt Motor of ISI marked : 2HP or 5HP, 220 V. Machines will have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and operating manual isalso must.(with foundation & Experiment Table) 131 Brake test in DC Series Motor Supply, Installation , Commissioning & Testing with suitable ISI markedammeter, voltmeter, starter, rheostat , digital tachometer , Spring balance & loadings, protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Brake test in DC Series Motor& load Characteristics: DC Series Motor of ISI marked : 2HP, 220 V.Machineswill have to be set on M.S.Channel base with suitable footing/ fixtures and screws etc. and operatingmanual is also must.(with foundation & Experiment Table) 132 Speed Controlof 3-Phase Squirrel cage Induction motorSupply, Installation , Commissioning & Testing with necessary & suitable ISI marked meters such as ammeter, voltmeter, frequency meter , starter, protective devices and all other accessories mounted on a standing panel board as per following specification :For Speed Controlof 3-Phase Squirrel cage Induction motorby – (i) volt /freq control method : Three phase Squirrel cage induction motor : 2HP, 400V with v/f controller.Machineswill have to be set on M.S.Channel base with suitablefooting/fixturesandscrewsetc.includingtheoperating manual.(with foundation & Experiment Table) 133 Load Test of an Alternator & % regulation at various loads with Unity Power factorSupply, Installation , Commissioning & Testing with suitable ISI marked ammeter, voltmeter, starter, star connected load , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :For Load Test of an Alternator and Determination of%-age regulation at various loads with unity power factor : DC Shunt Motor of ISI marked : 3HP, 220 V , AlternatorISI marked: 2 KVA, 415 V , 50 Hz.Machineswill have to be set on M.S.Channel base with suitable footing/fixtures and screws etc. and andoperating manual is also must.(with foundation & Experiment Table) 134 Measurement of Slip of 3-Phase induction motorSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter, stroboscope etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification :Measurement of Slip of 3-Phase induction motor by –(i) Stroboscopic& (ii ) Tachometer methods and reversing the direction of rotation of the motor : Three phase squirrel cage induction motor of ISI marked: 2 HP , 415 V , 50 Hz .Machineswill have to be set on M.S.Channel base withsuitable footing/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 135 Synchronization of two 3-Phase alternatorsSupply, Installation , Commissioning & Testing with suitable ISI marked meters such as ammeter, voltmeter, frequency meter etc , starter , digital tachometer , protective devices and all other accessories mounted on a standing Bakelite panel board as per following specification : Synchronization of 3-Phase alternator ( 2 SETS ) by– (a) Three Lamp & (b) Synchroscope Methods : DC Shunt Motors of ISI marked : 5HP, 220 V ,Alternators of ISI marked: 3 KVA, 400 V, 50 Hz.Machineswill have to be set on M.S.Channel base withsuitable footings/fixtures and screws etc. and and operating manual is also must.(with foundation & Experiment Table) 136 POWER SYSTEM LAB 137 KIT FOR STUDY OF ACTIVE & REACTIVE POWERWITH SIMULATIOL KIT & LAPTOPStudy of Active & Reactive power with simulator Kit and Laptop with appropriate software, The kit should consist of variable Inductive & Capacitive load to observe change in active & Reactive power 138 MODEL OF VARIOUS TYPES OF TURBINES USED IN POWER GENERATING STATIONSModel Piece of each type of Turbine 139 PYRANOMETERMEASUREMENT OF SOLAR RADIATION BY PYRANOMETER 140 PHOTO VOLATIC SYSTEM USED IN STREET LIGHTWITH SOLAR PLATE,PV CELL,BATTERY,CHARGER 141 STUDY OF POWER SYSTEM OF 6.6 KV/400 V SUBSTATION USED FOR A HOUSING CONPLEXMODEL 142 D.C NETWORK ANALYSERD.C NETWORK ANALYSER FOR STUDY OF DIFFERENT TYPES OF FAULTS 143 DIFFERENT TYPE OF EXCITATIONS SYSTEM USED IN ALTERNATORSTATIC EXCITER,SHAFT MOUNTED,ROTATNG TYPE EXCITER & Brushless exciter ( Model only) 144 MISCELLANEOUS 145 MOTOR-ALTERNATOR SET FOR SYNCHRONISATION OF TWO ALTERNATOR WITH SYCHRONISING PANEL INCLUDING CHECK SYNCHROSCOPE & BULB ARRANGEMENT TO PERFORM TWO BRIGHT ONE DARK LAMP METHOD1.TWO SET OF D.C MOTOR 2.5 KW,230 VOLT,3000 R.P.M WITH SPEED CONTROL ARRANGEMENT 2. TWO SET OF 1 KVA,3 PHASE,440 VOLT,3000 R.P.M ALTERNATOR WITH BASE MOUNTING & EXCITATION SYSTEM. 146 PlierPlier of good quality 147 TesterTester Screwdriver of reputed brand 148 Screwdriver setScrewdriver set of reputed brand
Contract Date: Mar 12, 2026 Contract Value : ₹ 33.87 Lakh
Government Departments No of Bidders 9
West Bengal View Result →
21.
Defence #9797721 AOC
Bids Are invited for Frame 10 Inch Mark 4 - Carbon Fibre Frame 10 Inch Compatible With Geprc, Top Plate 4 Mm Aluminium Standoff (30Mm) Arm Bar 5 Mm For Heavy Load Flights. , Motor 900Kv 3115 - Brushless Motor 3 To 185 Rating 900 Kv, Compatible With Li-Po Bty. , Propeller 10 Inch Triblade - Fpv Drone Propeller 1507 Glass Fiber Nylon 3 Blade (2 Pairs Cw + Ccw). , Digital Vtx Camera With Antenna - Digital Vtx With Night Vision 4K Resolution Field Of View 3600 With 5.8 Ghz & 900 Mhz. , Fpv Goggles - Light Weight Portable Fpv With Micro-Oled Screen Video Transmission, Hd Low Latency, Compatible With 5.8 Ghz Band. , Remote Controller - Remote Controller Support Firmware Edgetx/ Openty 16 Channels, Range Upto 10 Km Frequency Band 2.4 Ghz. , Elrs Receiver - Elrs 2.4 Ghz Nano Receiver Module, With Dual Antenna Rf Output 200 Mw Speed 1000 Hz To 2000 Hz Power Source 5V. , Dropping Mechanism - Alloy Release Device Made Of Aerial Aluminum (Cnc) Light Weight Silver Colour. , Servo Motor - Metal Gear Servo Motor Rds5180, 80 Kg High Torque & Rc Needs & 1800. High Performance Digital Servo Motor. , Flight Controller - Fc Input Voltage 7.4-26V (2-6S Lipo) , Battery 12600 Mah - Bty 12600 Mah Li-Ion Bty/ 10C To 13C 6 Cell, 22.2V For Fpv Drones Light Weight. , Gps M100 - Gps M100 Pro 10Th Generation Chip Compatible With Fpv & Fixed Wing Uav Receiving Channel Is Expanded To 120 Channels. , Landing Gear - Fpv Landing Gear 3K Matte Carbon Fiber + Cnc Aluminum With Mount Total Quantity : 19
Contract Date: Ref. Documents Contract Value : ₹ 1.00 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 6
Uttar Pradesh View Result →
22.
Educational and Research Institute #9774545 AOC
Tender For Supply Of Library Books = Limited; 1 Basic Electrical & Electronics Engg.-Nagrath & Kothari 2 Programming Logic Controllers-Petruzulla 3 Power Electronics 3E-Muhammad H.Rashid 4 Principles of Power Systems -V.K.Mehta 5 Basic Electrical & Electronics Engg.2E-SK.Bhattacharya 6 Power Electronics-PS.Bhimbra 7 8051 Microcontroller & Embedded Systems 2E-Mazidi & Mazidi 8 HVDC Power Transmission Systems 3E-K.R.Padiyar 9 Electric Motor Drives-R.Krishnan 10 Power System Protection & Switchgear 3E-Badri Ram 11 Electric Power Generation-Singh 12 Switchgear & Protection-J.B.Gupta 13 Water Supply Engineering-Modi 14 Concrete Technology-M.S.Shetty 15 Soil Mechanics and Foundations 17E-B.C.Punmia 16 Design of Steel Structures 5E-S.S.Bavikatti 17 Estimating & Costin in Civil 28E-B.N.Dutta 18 Engineering Graphics-Dhananjay Jolhe 19 Limite State Designof Reinforced Concrete-B.C.Punmia 20 Manual of Tropical Housing-Koenigsbeger 21 Earthquake Resistant Design of Structure-Pankaj Agarwal 22 Soil Mechanics & Foundation Engg.2E-P.Purushothamaraj 23 TB of Bulding Construction-Arora & Bindra 24 TB of Railway Engineering-Saxena & Arora 25 Prestressed Concrete 6E-N.Krishnaraju 26 Reinforced Concrete Design-N.Krishnaraju 27 Fiber Reinforced Composites 3E-P.K.Mallick 28 Concrete Technology-Neville & Brooks 29 RCC Designs-B.C.Punmia 30 Engineering Drawing + Autocad 5E-K.Venugopal 31 Advanced RCC Design 3E-S.S.Bavikatti 32 Engineering Graphics 16E-K.Venugopal 33 Brick & Reinforced Brick Structures-P.Dayaratnam 34 Railway Engineering-Rangwala 35 Rehabilitation of Concrete Structures-B.Vidivelli 36 Basic Civil Engineering 4E-M.S.Palanichamy 37 Maintenance Repair & Rehabilitation-P.C.Verghese 38 Repair & Rehabilitation of Concrete Structure-Poonam Modi 39 Highway Engineering 10E-Khanna & Justo 40 Design of Reinforced Concrete-PC.Verghese 41 Remote Sensing 3E-Robert Schowengerdt 42 Remote Sensing 3E-Jensen 43 Surveying Vol-1-Arora 44 Surveying Vol-2-Arora 45 Surveying Vol-1-B.C.Punmia 46 Surveying Vol-2-B.C.Punmia 47 Linear Intergrated Circuits 7E-Roy Choudhury 48 Communication Systems 5E-Simon Haykin 49 CMOS VLSI Design 4E-Neil.Weste 50 Digital Design-Morris Mano 51 Electronic Communications 4E-Dennis Roddy 52 Verilog HDl Primer 3E-J.Bhasker 53 Wireless Communications 2E-Theodre Rappaport 54 Electronic Device & Circuits 11E-Robert Boylestad 55 ARM System on Chip Architecture 2E-Steve Furber 56 Product Design Development-Karl T.Ulrich 57 Practical Finite Element Analysis-Nitin S.Gokhale 58 Product Deign-Kevin Otto 59 Advanced Vehicle Technology-Heinz Heisler 60 Mechanics of Composite Materials-Mukopadhyay 61 Advanced Machining Process-A.K.Jain 62 Welding Engineering & Technoogy-Parmar 63 Mechanical Engineering Objective-R.S.Khurmi 64 Power Plant Engineering-R.K.Hegde 65 Communication Skills-Sanjay Kumar, Pushpalata 66 Organizational Behaviour-Stephen P.Robbins 67 The Ace of Soft Skills: Attitude Communication an Etiquette for Success-Gopala Swamy Ramesh 68 Communication skills for professionals-Konar nira 69 Personality Developement and soft skills-Barun K Mitra 70 Soft skill for everyone-Butter Field 71 Effective Communication-John Adair 72 Bringing out the best in people-Aubrey Daniels 73 Differential Calculus-Shanthinarayan 74 Pharmaceutical Mathematics with application to Pharmacy-Panchaksharappa Gowda D.H 75 Integral Calculus-Shanthinarayan 76 Higher Engineering Mathematics-Dr.B.S.Grewal 77 Environmental Science-Y.K.Sing 78 Environmental Biology-Agarwal K.C. 79 Environmental Chemistry-De A.K. 80 Introduction to Chemical Engineering-Walter L Badger & Julius Banchero 81 Solid phase extraction, principles,techniques and applications-Nigel J.K.simpson 82 Unit operation fo chemical engineering-Mcabe Smith 83 Pharmaceutical Engineering Principles and practices-C.V.S Subrahmanyam et al., 84 Remington practice of Pharmacy-Martin 85 Theory and practice of industrial pharmacy-Lachmann 86 Physical pharmaceutics-C.V.S Subrahmanyam et al., 87 Cooper and Gunns Tutorial Pharmacy-S.J.Carter 88 Dietetics-Sri lakshmi 89 Role of dietary fibres and neutraceuticals in preventing Diseases-K.T.Agusti and P.Faizal 90 Advanced Nutritional Therapies-Cooper K.A 91 The Food Pharmacy-Jean Carper,Simon & Schuster 92 Functional Foods-Goldberg 93 Quality Assurance of Pharmaceuticals- A Compendium of Guide lines and Related materials vol-1 94 ISO 9000 and Total Quality Management-Sadhank G Ghosh 95 Good Laboratory Practice-Marcel Deckker Series 96 Instrumental methods of chemical analysis-B.K.Sharma 97 Organic spectroscopy-Y.R. Sharma 98 Textbook of pharmaceutical analysis-Kenneth A. Connors 99 Vogels Textbook of Quantitative Chemical Analysis-A.I. Vogel 100 Practical Pharmaceutical Chemistry-A.H.Beckett and J.B.Stenlake 101 Organic Chemistry-I.L.Finar 102 Organic spectroscopy-William Kemp 103 Quantitative Analysis of Drugs-D.c.Garrett 104 Quantitative Analysis of Drugs in Pharmaceutical Formulations-P.D. Sethi 105 Spectrophotometric identification of Organic Compounds-Silverstein.
Contract Date: Mar 10, 2026 Contract Value : ₹ 1.41 Lakh
Government Departments No of Bidders 3
Tamil Nadu View Result →
23.
Agriculture #9749058 Technical Bid
Supply Of Tools, Instruments, Safety Equipment And Workshop Accessories To The Office Of The Assistant Executive Engineer (Agri), Wayanad , List Of Tools And Machineries , Tee Spanner Set Including Spanners Ranging From 8 Mm To 19 Mm Made From Chrome Vanadium Steel (Cr- V), Hardened And Tempered For Durability, The Handle Shall Be T-Shaped, Providing Maximum Torque And Grip And Surface Finish Shall Be Nickel-Chrome Plated For Corrosion Resistance. , Deep Socket Set Consist Of Sockets From 8 Mm To 22 Mm, Made Of Chrome Vanadium Steel, Fully Hardened, Tempered, And Chrome-Plated, The Sockets Shall Have Six-Point Or Twelve-Point Configurations For High Torque Applications, Suitable For Use With Ratchet Handles And Extension Bars. , Locking Plier (Vice Grip Type) 10 With Drop-Forged Steel Jaws With Heat-Treated Teeth For Firm Gripping, Include An Adjustable Screw And Quick-Release Lever, Nickel-Plated Surface For Corrosion Protection. , Long Nose Plier 6 Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 6 Overall Length, With Insulated Handles. , Long Nose Plier 8 Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 8 Overall Length, With Insulated Handles. , Adjustable Pipe Wrench Suitable For Gripping Pipes Up To 75 Mm Diameter Made Of Cast Iron Body With Drop- Forged Steel Jaws, Serrated And Induction-Hardened And Handle Painted Or Powder-Coated. , Heavy-Duty Pipe Wrench With Jaw Opening Up To 110 Mm Made Of Forged Alloy Steel, Precision-Machined Teeth For Firm Grip, Designed For Mechanical And Plumbing Use. , Heavy-Duty Filter Wrench With High-Tensile Rubber Or Nylon Strap And Steel Handle For Removing Large Oil/Fuel Filters, Handle Length: Minimum 300 Mm. Suitable For Heavy Machinery Maintenance. , Medium-Duty Filter Wrench With Adjustable Steel Band And Handle, Suitable For Medium-Sized Oil Filters. Chrome-Plated Finish With Non-Slip Grip. , Soft Face Hammer With Dual Rubber Striking Faces To Prevent Surface Damage. Head Weight Approx. 300–500 Gm, Handle Made Of Fiberglass , Non-Marring Mallet Hammer With Rubber Or Plastic Head 40 Mm And Sturdy Handle. Head Weight Approx. 1 Kg. Suitable For Precision Fitting Without Metal Deformation. , Cold Chisels Made Of Chrome Vanadium Or Carbon Steel (18 Mm Dia Approax) , Hardened And Tempered To 58–60 Hrc. Size 25 Mm, Length 300 Mm, Approax Weight 500 Gm Ground Cutting Edge With Anti-Slip Striking End. , Steel Wedges, Hardened And Ground, Used For Splitting Or Aligning. Made Of Forged Alloy Steel With A Rust- Resistant Finish 230 Mm Length 1.5 Kg. , Adjustable Torque Wrench With Working Range 25–135 Nm. Drive Size 3/8 Or 1/2, Accuracy ±4% Of Indicated Value With Reversible Ratchet And Quick- Release Mechanism. , Heavy-Duty Adjustable Torque Wrench, Range 70–340 Nm. 1/2 Drive, Accuracy ±4%, Chrome Vanadium Construction With Calibration Certificate. , High-Capacity Torque Wrench, Range 135–540 Nm. 3/4 Drive, Accuracy ±4%, Knurled Handle For Non-Slip Grip, Supplied With Protective Case And Calibration Certificate. , Steel Scale Set (5 Nos) Made Of High-Quality Tempered Stainless Steel With Etched And Permanently Engraved Graduations In Both Metric (Mm/Cm) And Inch Units. Straight, With Accurately Ground Edges And Smooth Surfaces, Graduation Accuracy Shall Conform To Is 1481:1970 Or Equivalent. Lengths : 150 Mm, 300 Mm, 600 Mm, 450 Mm, 1000 Mm. Each Scale Shall Have Clear Visibility Markings And Corrosion-Resistant Satin Chrome Finish. , Vernier Calipers Made Of Stainless Steel, Precision- Ground And Finished, With A Measuring Range Of 0–200 Mm And Least Count 0.02 Mm / 0.001 Inch Capable Of Internal, External, Depth, And Step Measurements. Vernier Scale And Main Scale Markings Shall Be Clearly Etched For Long-Term Readability. The Instrument Shall Conform To Is 3651:1981 Or Din 862 Standards. A Locking Screw Shall Be Provided For Measurement Retention, And The Tool Shall Be Supplied In A Protective Case. , Outside Micrometer (0–25 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate. , Outside Micrometer (25-50 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate. , Feeler Gauges Made Of Hardened And Tempered Spring Steel, Precision-Ground To Required Thickness, And Permanently Marked With Size Values. The Set Shall Include Multiple 75 Mm Long Blades Of 30 Different Thicknesses 0.03 Mm To 1.00 Mm Assembled In A Steel Holder With Pivot. Each Blade Shall Be Rust-Resistant And Polished For Smooth Operation. The Gauge Shall Conform To Is 3179:1982 Or Equivalent Standards. , Wire Gauge (Standard Bs 1505 Type) Manufactured From Hardened And Tempered Steel With Precisely Cut Slots For Wire Sizes 1 To 36 Swg. The Gauge Shall Be Circular Or Rectangular In Shape With Permanent Engraved Markings. The Tool Shall Comply With Bs 3737 / Is 3177 Standards For Accuracy. Surface Shall Be Satin Chrome Or Nickel Plated To Resist Corrosion Suitable For Measuring Diameters Of Wires, Rods, And Drill Bits. , Inside Calipers Shall Be Made Of Forged Steel Or Stainless Steel, Polished And Hardened. The Legs Shall Have Finely Ground Points With A Pivot Joint And Tension Adjustment For Smooth Movement. Measuring Range: 20–170 Mm Suitable For Measuring Internal Dimensions And Bore Diameters. Shall Conform To Is 3564:1985 Standards. , Outside Calipers Made Of High-Grade Carbon Or Stainless Steel With Hardened Tips, Spring Joint, And Knurled Adjustment Nut For Precision. Shall Conform To Is 3564:1985 Or Equivalent Standards. Surface Finish: Polished Or Chrome-Plated. 12 Inch Size , Centre Punch Manufactured As Per Is 7177 - 1999 Or Equivalent, Made Of High Carbon Or Alloy Tool Steel, Hardened And Tempered At The Striking End And Point. Length: Approximately 150 Mm, Approximate Weight 160 Gm With Point Angle Of 60° ± 2°. The Striking End Shall Be Chamfered To Prevent Mushrooming. Surface Finish Shall Be Black Oxide Or Polished. Suitable For Marking Centers On Metal Surfaces Before Drilling Operations. , Portable Digital Non-Contact Tachometer Of Reputed Make, With A Non-Contact Measuring Range Of Approximately 10 To 99,999 Rpm And Accuracy Not Inferior To ±0.04% ±2 Digits. Equipped With A Digital Lcd Display, Data Hold, Counting Function, And Computer/Usb Interface For Data Transfer, A Working Distance Of Around 0.2 M With A ±30° Working Angle, Reflective Tape, Interface Cable, And Carrying Case. Conforming To Iec 61010-1 / Is 13875. , Portable True-Rms Digital Multimeter Of High- Accuracy, Capable Of Measuring Ac/Dc Voltage Up To 1000 V, Ac/Dc Current Up To 10 A, Resistance, Capacitance, Frequency, Diode, And Continuity. The Meter Should Have Features Like Auto-Ranging, Data- Hold, Min/Max, And Relative Measurement Functions With A Large Back-Lit Display Of Minimum 4000 Counts Or Higher. The Instrument Shall Have Overload Protection, Fused Input Terminals, And Comply With Safety Category Cat Iii 1000 V Or Cat Iv 600 V As Per Iec 61010-1. The Unit Shall Be Housed In A Protective Insulated Casing Suitable For Field Use And Supplied Complete With Test Leads, Batteries, Protective Case, And Calibration Certificate. , Handheld Clamp Meter (True-Rms Type) Designed For Measurement Of Ac And Dc Currents Up To 1000 A, With Additional Functions For Ac/Dc Voltage, Resistance, Frequency, And Continuity. The Jaw Opening Shall Accommodate Conductors Up To 40–60 Mm In Diameter. The Meter Shall Feature A Large Digital Display, Auto-Range Selection, Data-Hold And Peak Capture Functions, And Have An Accuracy Of ±2 % Or Better. It Shall Meet Cat Iii 1000 V / Cat Iv 600 V Safety Standards, Include Overload And Transient Protection, And Be Built In A Shock-Resistant Insulated Body. The Clamp Meter Shall Be Supplied With Test Leads, Carrying Pouch, And Calibration Certificate. , Handheld Vibration Meter Shall Be Capable Of Measuring Vibration Velocity, Displacement, And Acceleration Within A Frequency Range Of 10 Hz To 1 Khz Or Higher Complying Iso 2954. The Instrument Shall Display Rms Or Peak Values In Standard Engineering Units (Mm/S, Μm, M/S²). It Shall Feature A Detachable Accelerometer Probe, Communicate With Pc Computer For Statistics And Printing By The Optional Cable And The Software. The Device Shall Be Compact, Battery-Operated, And Suitable For Predictive Maintenance Of Rotating Machinery. It Shall Be Supplied With Transducer, Magnetic Base, Extension Cable, And Carrying Case. , Wire Strippers Suitable For Removing Insulation From Copper Conductors Ranging From 0.5 Mm² To 6 Mm² , Ratchet-Type Crimping Tool Designed For Insulated And Non-Insulated Terminals 1.5 Mm² To 10 Mm², With Interchangeable Dies And Ergonomic Handles.Alloy Steel Duly Hardened & Tempered , Heavy-Duty Mechanical Or Ratchet Type Cable Cutters Suitable For Cutting Copper And Aluminium Cables Up To 300 Mm² , Soldering Iron Shall Be Of 40 W Capacity Insulated Handle. Cable Lugs And Ferrules Shall Be Of Tinned Copper, Crimp Type, Conforming To Din 46234/46235 Standards , Clamp-On Earth Leakage Meter Shall Measure Ac Leakage Current In Grounding And Neutral Conductors Without Disconnection, Within A Range Of 0.1 Ma To 100 A Or Higher. The Clamp Jaw Shall Accommodate Conductors Up To 50 Mm Diameter. The Instrument Shall Comply With Cat Iii 600 V Safety Category, Have A Back-Lit Display, And Be Supplied With Batteries, Manual, And Calibration Certificate. , Infrared Thermometer (Ir Gun) Shall Measure From - 50 °C To +550 °C With Laser Targeting And Digital Display. Should Have Rugged, Insulated Housings And Be Supplied With Charger, Carry Case, And Calibration Certificate. , Battery Load Tester (12V) Shall Provide Controlled Load Up To 2–200 Ah To Assess Battery Condition By Measuring Voltage Drop And Internal Resistance Instruments Shall Have Clear Displays, Polarity Protection, Insulated Clamps, And Rugged Enclosures For Workshop Use. , Digital Motor Checker Equipped With A Backlit Lcd Display, To Provide Accurate Measurements Of Key Electrical Parameters Including Insulation Resistance (0–200 M?) And Inductance (0–200 Mh), Operates On Alkaline Batteries, Featuring Low Battery Indication For Reliable Field Use, Precise Readings With An Accuracy Of ±2%. Complies With Iec 61010-1: Safety Requirements For Electrical Equipment For Measurement. , Smart Battery Charger Shall Provide Automatic Multi- Stage Charging For 12 V Batteries With Protections For Overcharge And Polarity Reversal. , Mechanical Puller (3?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 3 Inch (76.2 Mm), With A Spread Of Approximately 76 Mm, Reach Of About 65 Mm, And Working Diameter Range From 15 Mm To 80 Mm, Threaded Spindle Length 125 Mm, Conforming To Is 6149 / Iso 2985 Standards. , Mechanical Puller (8?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 8 Inch (203.2 Mm), With A Spread Of Approximately 203 Mm, Reach Of About 177 Mm, And Working Diameter Range From 30 Mm To 210 Mm, Threaded Spindle Length 174 Mm, Conforming To Is 6149 / Iso 2985 Standards. , T-Handle Spark Plug Socket Wrench (21 Mm) Carbon Steel With A Chrome-Plated Finish, With A 360- Degree Swivel Head For Flexible Operation, A Plastic Grip On The T-Handle, A Rubber Insert Within The Socket, An Approximate Weight Of 110 Grams, And Conforming To Relevant Standards For Hand Tools. , 10Pcs Carburetor Adjusting Tool Kit Including: 21- Teeth Splined, 7-Teeth Splined, Single D, Small Head Single D, Double D, Pac Man, Small Head Pac Ma,N Hexagon Shaped, Six Star, And Carburetor Cleaning Tools All Made Of High-Quality Stainless Steel Wear Resistant And Long Lasting With Ergonomic Handle Comfortable To Grip And Stable To Use. , The Heavy-Duty Spark Plug Cleaner And Tester Designed To Clean And Test Spark Plugs Under Simulated Engine Conditions, Operates On A 220 V Ac Supply And Incorporates A 12 V / 12 Kv Ignition Coil For Spark Generation And A 220 V / 12 V Electronic Vibrator For Cleaning Including A Pressurized Testing Chamber With A Working Pressure Of Up To 12 Kgf/Cm² And A Separate Abrasive Cleaning Chamber Equipped With A Double- Acting Valve For Blasting And Dust Removal, Should Be Compatible With Spark Plug Sizes M10, M12, M14, And M18 Through Interchangeable Rubber Adapters And Features A Pressure Regulator For Maintaining Safe And Consistent Operation. Product Should Conform To General Standards For Electrical Safety And Workshop Equipment, Such As Is 302 (Part 1): Safety Of Electrical Equipment, Is 10326: Automotive Service Equipment – Spark Plug Testers, Or Equivalent International Standards , Heavy-Duty Sprocket Chain Breaker And Splitter Tool Suitable For Breaking, Splitting, And Repairing Chains Of Size 420 To 530 Made Of High-Grade Carbon Steel , Compact Chain Saw Grinder For Precise Grinding Of Chain Saw Blades For A Rated Voltage Of 220–230 V At 50/60 Hz, With An Input Power Of 300 W And A No-Load Speed Of 8400 Rpm, Equipped With A 100 Mm Grinding Wheel Suitable For Most Standard Chain Saw Chains, Weighing Around 2.5 Kg, Conforming To General Safety And Performance Standards Such As Is 302 (Part 2/Sec 201): Electrical Safety For Hand-Held Tools And Iec 60745-2-4 , Soldering Station Operating On A 220–240 V Ac, 50/60 Hz Supply, Input Power Of 60 W, With A Preheat Time Of Approximately 1 Minute, Digital Temperature Display, Adjustable And Thermostatic Temperature Control Via A Rotary Knob, Built-In Ceramic Heating Element, A Straight Tip Head, A Durable Stand For Iron Placement, Packed In A Color Box, Conforms To Iec 60335-2-45: Household And Similar Electrical Appliances – Safety Of Portable Heating Tools And Iec 61340-5-1: Protection Of Electronic Devices . , Compact, Durable, And Easy To Operate Portable High- Pressure Hand-Operated Portable Grease Pump With A 10 Kg Grease Capacity And Delivers A Material Output Of Approximately 3 Grams Per Stroke, Maximum Block Pressure Of 140 Kg/Cm², A 2-Meter High-Pressure Rubber Hose Fitted With End Connections. , Corded Type Electric Impact Wrench Conforming To Is 7151:1983 / Iec 60745-2-2 [Vibration (=11.5 M/S²), And Noise (104 Db(A))], With A Continuous Input Rating Of 400 W,. It Shall Provide A Maximum Fastening Torque Of 350 N·M, With A No-Load Speed Of 2000 Rpm And Impact Rate Of 2000 Blows Per Minute, 12.7 Mm (½”) Square Drive, A 2.5 M Power Supply Cord. The Housing In Impact-Resistant Polymer With Reinforced Internal Metal Gear Casing, Suitable For Tightening And Loosening Ensuring Efficient Operation For Both Standard (M12–M22) And High-Strength Bolts (M12–M16) In Vehicle And Machinery Maintenance Applications , Electric Power Drill (Corded Type) Of Reputed Make, Single Phase 220–240 V, 50 Hz Ac Supply, 350 W And Variable Speed Range Up To 3000 Rpm (No Load). Including A Pistol-Grip Body, Keyed Or Keyless Chuck, And A 2.0 M Power Supply Cord Complying With Is 7554 / Iec 60745 / Iso 11148 Or Equivalent Standards, [Low Vibration (=3.0 M/S²) And Sound Pressure Level Below 80 Db(A)] Supplied Complete With Chuck Key, Side Handle (If Applicable), And Instruction Manual. , Portable Electric Heat Gun Powered By An 1800 W Motor Operating At 230 V Ac, For Adjustable Airflow Between 350–550 L/Min And A Working Temperature Range Of 60°C To 550°C, Selectable In Three Stages (60/350/550°C), Achieves Full Heat-Up Within 1 Minute, With A Heat-Resistant Plastic Body And Heat Isolation Cap, Weighs 750 G And Features A 2 M Cord Length And Conforming To Iec 60335-2-45: Household And Similar Electrical Appliances – Safety Of Portable Heating Tools And Iec 61000-3-11/12: Electromagnetic Compatibility Standards. , Bench Vice Of Heavy-Duty Engineer’S Type, Suitable For Fitting And General Workshop Applications With Jaw Width 125 Mm (5 Inches), With Replaceable Serrated Hardened Steel Jaws For A Firm Grip On Workpieces, The Body And Sliding Jaw Shall Be Made From High-Grade Cast Iron Or Forged Steel, Precision Machined To Ensure Smooth Operation And Alignment. The Vice Shall Be Equipped With A Large-Diameter Acme-Threaded Spindle And Steel Handle With Knurled Ends For Easy Tightening (1600 Kg Tightening Force) And Release. The Vice Includes A 360° Swivel Base With Locking Mechanism, Allowing Positioning And Adjustment As Required During Work. The Anvil Surface On The Rear Shall Be Machined And Hardened, Suitable For Light Hammering Operations. The Vice Shall Have A Clamping Capacity Of At Least 150 Mm, And All Moving Parts Shall Be Protected Against Rust And Corrosion By Paint Or Plating. The Bench Vice Should Be Suitable For Mounting On Heavy-Duty Wooden Or Steel Workbenches And Capable Of Withstanding Heavy Mechanical Use In Workshops And Maintenance Facilities. It Shall Conform To Is: 2586 (Specification For Bench Vices, Heavy Duty) Or Equivalent Standard. , Heavy-Duty Roller Tool Cabinet With 4 Drawers And One Cupboard Suitable For Use In Mechanical, Workshops For Organized Storage Of Hand Tools, Instruments, And Accessories Made Of High-Quality Cold- Rolled Steel Sheet With A Cabinet Body Thickness Of 0.8–1.0 Mm And Drawer Sheet Thickness Of 0.7 Mm, With An Overall Size Of 765 Mm (L) × 465 Mm (W) × 812 Mm (H) And An Overall Height Of 976 Mm Including Casters. Drawers Of Size 536 Mm (L) × 410 Mm (W) × 74.5 Mm (H), Mounted On Precision Ball-Bearing Slides And The Top Panel Area Should Be Suitable For Tool Placement During Maintenance Work. The Unit Should Be Mounted On Four Heavy-Duty Casters Of Size 5? × 2?, Two Of Which Shall Be Swivel Casters With Locking Brakes For Easy Mobility And Stability During Use. The Cabinet Shall Include A Central Locking System For All Drawers, Should Be Surface-Treated With Powder Coating For Corrosion Resistance And A Smooth Finish. The Tool Cabinet Shall Conform, Where Applicable, To The General Guidelines Of Is 7155 (Industrial Trolleys And Cabinets) And Iso 9001:2015 Quality Manufacturing Standards. , Oil Drain Pan Made Of High-Density Polyethylene (Hdpe) With A Capacity Of 16 Litres Including Integrated Handles, A Pouring Spout, And Anti-Spill Lips To Prevent Leakage During Draining Suitable For Chemical Resistance To Engine Oil, Transmission Fluids, And Coolants. , Rack For Batteries, Made Of Well-Seasoned Hardwood Or Marine Plywood With Sturdy Ms Frame Or Wooden Supports. Includes 3–4 Ventilated Shelves With Acid- Resistant Coating And Removable Rubber Or Pvc Mat. Designed To Hold Multiple Batteries Safely And Prevent Corrosion. Approx. Size: 1500 Mm × 1000 Mm × 450 Mm. , Rack For Spares Fabricated From High-Quality Wood Or Plywood With Ms Reinforcement. Includes Adjustable Or Fixed Shelves (3–5 Tiers), Each Supporting Up To 150 Kg (Udl). Finished With Protective Paint Or Polish For Workshop Use. Approx. Size: 2000 Mm × 900 Mm × 450 Mm. , Industrial Wet And Dry Type Vacuum Cleaner With A Power Rating Of 1500 W And Operating Voltage Of 220–240 V, 50 Hz, Suitable For Workshop And Service Bay Cleaning Applications With A Capacity Of 35 Litres, A Vacuum Suction Pressure Of 200 Mbar And An Airflow Rate Of 53 L/S, Ensuring High-Efficiency Dust And Liquid Removal. The Tank Should Be Made Of Corrosion- Resistant Stainless Steel (Minimum Ss 304 Grade) With Heavy-Duty Caster Wheels For Mobility. It Should Be Provided With A Flexible 5 M Power Cable, Washable Filters, Blower Function, And Accessories For Both Wet And Dry Operation. The Vacuum Cleaner Shall Conform To Iec 60335-2-69 (Safety For Wet And Dry Vacuum Cleaners For Commercial Use) Or Equivalent Indian Standard Is 11621:1986, And Include Overload And Thermal Protection Features For Motor Safety. , Portable, Electric-Operated Industrial Pressure Washer Conforming To Iec 60335-2-79 / Is 8442 With A Power Rating Of 1700 W (230 V, 50 Hz Single-Phase Supply) And A Maximum Working Pressure Of 130 Bar And A Flow Rate Of 7 Litres Per Minute, With Self-Priming Capability Of 0.5 M, High-Pressure Foam Detergent System, 6 M Pvc Hose, Manual Hose Reel, 5 M Power Cable, 3-In-1 Nozzle And Ergonomic Handle , Industrial Locker Cabinet (24-Door Type), Fabricated From 22-Gauge Mild Steel Sheet Pre-Treated And Powder-Coated For Corrosion Resistance And Smooth Finish With A Rigid Frame Structure, Each Locker Compartment With Individual Mechanical Key Locks Shall Measure Approximately 18 (D) × 12 (W) × 12 (H), With A Total Cabinet Size Of About 18 (D) × 48 (W) × 78 (H). A Load Capacity Of Minimum 10 Kg Including Ventilation Slots And Numbering Provision For Each Compartment , Abc Powder Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4 Kg Suitable For Class A Fires. Dry Chemical Powder (Mono Ammonium Phosphate) Based, Stored Pressure Type With Working Pressure Of 15 Bar, Suitable For Electrical And Combustible Material Fires.Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Co2 Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4.5 Kg Suitable For Class B Fires . Carbon Dioxide Gas Type With Seamless High-Pressure Steel Cylinder Conforming To Is 7285, Discharge Hose With Horn, And Designed For Electrical And Flammable Liquid Fires. Extinguisher Sould Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory- Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Foam Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 9 L, Suitable For Class C Fires. Stored Pressure Or Cartridge Type Using Aqueous Film-Forming Foam Suitable For Flammable Liquid Fires. Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Fire Blanket Shall Be Made Of 840 Gsm Glass Fiber Or Kevlar-Coated Woven Fabric, Resistant To Temperatures Up To 550°C, Conforming To Is 11871 / Bs En 1869, And Provided In A Quick-Release Wall-Mount Case. Standard Blanket Size: 2.00 M × 1.00 M For Personnel Protection And Small Fire Suppression. , First Aid Box Of Size 32.5(H) X 28.5(W) X 8(D) Cmshall Conform To Is 13154 (Part 1–3), Made Of Powder-Coated Metal, Gi Or Abs Plastic, Waterproof And Corrosion Resistant, To Keep All Essential Medical Supplies For Industrial Workshops (Bandages, Antiseptics, Gauze, Adhesive Strips, Scissors, Burn Cream, Splints, Sterile Pads, And Cpr Mask). , Eye Wash Station Wall Mount Type, Made Of Stainless Steel Push Plate 12.7 Mm (1/2 Inch Bsp) Inlet, 4810 Ss, Providing Continuous Flow At 1.5 L/Min Per Outlet, Operated By A Push Plate, Complying With Ansi Z358.1 / Is 10592. , Foldable Stretcher Shall Be Lightweight Aluminum Or High-Tensile Steel Frame With Washable Canvas Sheet, Capable Of Carrying 120 Kg Load, Fitted With Safety Straps And Rubber Handles, Conforming To Is 1904 / En 1865. , Ppe: Helmets Hdpe Or Abs Shell, Is 2925 Compliant, Chin Strap, Sweatband, Impact-Resistant Up To 50 Joules. , Ppe: Goggles Polycarbonate Lenses, Anti-Scratch And Uv-Resistant, Is 5983 / En 166 Compliant, Side Shields. , Ppe Industrial Gloves: For Mechanical Work—Leather Or Nitrile (Is 6994); For Chemical Work—Pvc/Neoprene (En 374); For Electrical Insulation—Rubber Class 0 (Is 4770). , Ppe: Safety Boots Confirming To Is 15298 / En 20345 Compliant, Steel/Composite Toe Cap (200 J Impact), Oil- And Slip-Resistant Sole, Steel Mid Sole Antistatic. , Ppe: Protective Overalls With 100% Cotton 210 Gsm Or Fire-Retardant Fabric, Full-Sleeve, High-Visibility Reflective Tapes Per Is 15748 / En 20471. , Electrical Insulated Gloves Conforming To Is 4770 / Iec 60903, Suitable For Class 0 (1000 V Ac / 1500 V Dc) Electrical Protection, Made Of High-Dielectric Natural Rubber, Seamless, And Rolled Cuff Type. Each Glove Shall Undergo Routine Dielectric Test At 5 Kv For 1 Minute With No Puncture Or Flashover. The Gloves Shall Be Category Rc (Resistant To Acid, Oil, Ozone, And Low Temperature) And Provided With A Cotton Inner Liner And Storage Pouch. Supplied With Test Certificate Indicating Batch Number, Test Voltage, And Date. , Welding Face Shield Suitable For Full-Face Protection During Welding, Grinding, And Metal Fabrication Works With A Shield Size Of Approximately 9 X 12, Made Of Durable Polypropylene Providing High Impact, Heat, And Corrosion Resistance. The Face Shield Shall Include An Adjustable Ratchet-Type Headgear With Multiple Adjustment Positions To Ensure A Secure And Comfortable Fit For Prolonged Use. The Approximate Weight Shall Be 1.5 Kg Or Less, And The Product Shall Be Supplied As One Complete Unit. The Face Shield Should Conform To General Industrial Safety Standards Suitable For Use In Workshops. , Industrial-Grade Welding Gloves Suitable For Providing Protection, Comfort, And Dexterity During Welding, Cutting, And Metal Fabrication Operations, Made From Premium Split Leather (Cowhide Or Goatskin) With A Minimum Thickness Of 1.2 Mm, Offering High Resistance To Heat, Sparks, And Mechanical Abrasion. The Inner Lining Shall Be Made Of Soft Flame-Retardant Cotton Or Fleece, Providing Insulation Against Heat And Comfort For Prolonged Use. Each Glove Shall Have Reinforced Palm And Finger Patches For Added Durability And Better Grip While Handling Tools And Hot Metal Objects. The Gloves Should Be Stitched With Heat- Resistant Thread To Prevent Seam Failure During Exposure To High Temperatures. The Length Shall Not Be Less Than 14 Inches (350 Mm), Ensuring Full Hand And Wrist Protection, With Extended Cuffs To Safeguard The Lower Forearm Against Welding Spatter And Radiant Heat. The Gloves Should Be Conformed To En 388 (Mechanical Risks) And En 407 (Thermal Hazards) Or Equivalent Indian Standards (Is 6153). They Shall Be Suitable For Mig, Tig, Arc, And Gas Welding Operations. Should Be Heat And Flame-Resistant, Puncture And Tear-Resistant, And Designed For Repeated Use In Demanding Industrial , Heavy-Duty, Low-Profile Type Hydraulic Trolley Jack Suitable For Lifting Vehicles Or Machinery Up To A Rated Capacity Of 3 Tons. The Jack Shall Be Constructed From High-Grade Steel With Welded Frame For Superior Strength And Stability, A Lifting Range From Approximately 130 Mm To 465 Mm, Operated Through A Hydraulic Lifting Mechanism Actuated By A Detachable Pump Handle. Should Be Equipped With A Safety Overload Valve To Prevent Lifting Beyond Rated Capacity, And Precision Hydraulic Seals To Prevent Oil Leakage. The Unit Shall Feature A 360° Swivel Rear Caster And Wide Front Wheels For Easy Maneuverability. The Saddle Shall Be Grooved Or Rubber-Coated For Secure Load Contact. The Jack Shall Conform To Is 7620 / Asme- Pase Or Equivalent Standards, And Shall Be Finished With Corrosion-Resistant Powder Coating. Supplied Complete With Hydraulic Oil Filled And Ready For Use. , Industrial-Grade, Floor-Operated Type Hydraulic Trolley Jack Suitable For Lifting Heavy Vehicles, Machinery, Or Agricultural Equipment Up To A Maximum Capacity Of 5 Tons. The Construction Shall Be Of Robust, All-Steel Design With Reinforced Chassis And Welded Seams For Durability. It Shall Have A Lifting Range From Approximately 150 Mm To 500 Mm, Operated By A Long Detachable Handle Providing Sufficient Leverage For Smooth Lifting. The Hydraulic System Shall Incorporate A Safety Overload Bypass System, Precision Machined Piston And Pump For Consistent Performance, And A Reliable Lowering Control Valve For Controlled Descent. The Jack Shall Be Equipped With Steel Swivel Casters, Wide Stance For Stability, And A Saddle Plate With Anti- Slip Surface. The Surface Finish Shall Be Rust-Resistant Enamel Or Powder Coating. The Unit Shall Comply With Relevant Is/Ansi/Ce Safety Standards, Factory-Tested For Rated Load, And Supplied Ready For Workshop Service. , The Hydraulic Bottle Jack Of 10-Ton Rated Capacity, Suitable For Lifting Tractors, Vehicles, Or Heavy Structures. The Jack Body Shall Be Made Of High-Tensile Steel With Precision Machining For Durability And Stability. It Shall Have A Lifting Range From Approximately 200 Mm To 400 Mm, Incorporating A Screw Extension On The Ram For Height Adjustment. The Hydraulic System Shall Be Fitted With A Built-In Safety Overload Valve And High-Quality Seals To Prevent Leakage. The Operating Handle Shall Be Detachable And Designed For Easy Pumping Action. The Base Shall Be Wide And Stable To Ensure Safety During Lifting Operations. The Jack Shall Conform To Is 10672 / Asme B30.1 Or Equivalent Standards, And Finished With Corrosion-Resistant Paint. Supplied Fully Assembled, Tested, And Filled With Hydraulic Oil. , The Jack Stands Shall Be Of Heavy-Duty Ratchet Or Pin- Lock Type, Designed To Support Loads Up To 3 Tons Per Pair. Each Stand Shall Be Fabricated From High-Grade Steel With A Broad, Stable Base And A Ratcheting Support Column Providing Positive Load Engagement. The Height Adjustment Range Shall Be Approximately 290 Mm To 430 Mm, With Fine-Tooth Ratchet Mechanism Or Pin-Lock System Ensuring Secure Positioning. Each Stand Shall Include A Safety Locking Mechanism To Prevent Accidental Lowering Under Load. The Saddle Shall Have A Contoured Top For Stable Seating Under Vehicle Lifting Points. All Structural Components Shall Be Fully Welded And Finished With Corrosion-Resistant Powder Coating. The Stands Shall Meet Asme-Pase / Ansi Pald Or Equivalent Safety Standards. Supplied As A Matched Pair, Factory-Tested For Load Stability And Mechanical Integrity. , The Hydraulic Engine Hoist Shall Be A Foldable, Mobile Workshop Crane With A 2 Ton Rated Lifting Capacity, Suitable For Lifting, Removing, And Installing Vehicle Engines Or Heavy Assemblies. The Frame Shall Be Made Of High-Strength Steel Sections With A Reinforced Boom, Hydraulic Lifting Ram, And Heavy-Duty Castor Wheels For Mobility. The Boom Shall Have Adjustable Reach Positions (E.G., 500 Kg, 1000 Kg, 1500 Kg, 2000 Kg) With A Lifting Range Of Approximately 0 – 2300 Mm. The Hydraulic Ram Shall Be Operated Via A Detachable Handle And Equipped With A Safety Overload Valve To Prevent Overloading. The Hoist Shall Feature A Folding Design For Space-Saving Storage, And A 360° Swivel Hook With Safety Latch For Secure Load Handling. The Finish Shall Be Industrial Enamel Or Powder-Coated For Corrosion Protection. The Equipment Shall Comply With Is 7631 / Asme B30.20 / Ce Standards And Supplied Ready For Operation. , The Transmission Jack Shall Be A Hydraulic Telescopic Type Suitable For Removing And Installing Vehicle Transmissions Or Gearboxes From Underneath The Lift. The Rated Load Capacity Shall Be 0.5 Ton, With A Lifting Range Of Approximately 1100 Mm To 1900 Mm. The Lifting Mechanism Shall Be Actuated By A Foot-Operated Hydraulic Pump For Hands-Free Operation. The Tilting Head Plate Shall Provide Front, Rear, And Side Adjustment Through Fine-Thread Screws To Aid Alignment During Installation. The Base Shall Be Wide And Equipped With Four Swivel Castor Wheels For Stability And Maneuverability. The Unit Shall Have A Safety Overload Valve, Heavy-Duty Hydraulic Seals, And A Controlled Lowering Valve. It Shall Conform To Asme Pase / En 1494 Standards And Be Supplied Fully Assembled And Oil-Filled. , The Chain Block Shall Be A Manual, Hand-Operated Lifting Device Of 2 Ton Rated Capacity, Suitable For Workshop And Field Lifting Applications. It Shall Have A Mechanical Gear System Enclosed In A Steel Casing, Operating A Load Chain Made Of Grade 80 Alloy Steel With High Tensile Strength. The Standard Lift Height Shall Be 3 M – 6 M, With An Option For Extended Lift Lengths. The Mechanism Shall Incorporate A Load Brake With Dual Pawls For Positive Load Holding And Safety Hooks With Safety Latches At Both Ends. The Hand Chain Shall Run Smoothly On Precision-Machined Sprockets. The Unit Shall Conform To Is 3832 / Asme B30.16 / En 13157, With Load Testing Certificates And Corrosion- Resistant Paint Finish.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Kerala View Result →
24.
Agriculture #9685449 Price Bid
Tender For Annual Plan 2025-26- Support To Farm Mechanisation Establishment Of Farm Machinery Clinic- Purchase Of Tools And Equipments For Agri Clinic At Chc Kozha , Hand Tools , A) Screwdriver Bits (26 Pcs, 25 Mm Length, S2 Steel) B) Phillips (Ph): Ph0, Ph1, Ph2, Ph3 C) Pozidriv (Pz): Pz0, Pz1, Pz2, Pz3 D) Slotted (Sl): Sl4, Sl5.5, Sl7 E) Hex (H): H2, H3, H4, H5, H6, H7, H8, H10 F) Torx (T): T10h, T15h, T20h, T25h, T27h, T30h, T40h G) Bit Holder (1 Pc) - 1/4 Hex H) Hexagonal Sockets (9 Pcs) - Sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 Mm I) Star Sockets (5 Pcs) - Sizes: E4, E5, E6, E7, E8 J) Ratchet Wrench (1 Pc) - 1/4 Drive, 45 Teeth (Reversible) K) Extension Bars (3 Pcs) - Lengths: 50 Mm (2), 100 Mm (4), 150 Mm (6) L) Universal Joint (1 Pc) - 1/4 Drive M) Three-Way Adaptor (1 Pc) - 3/8 Female × 1/4 Male N) Spinner Handle (1 Pc) - 1/4 × 150 Mm O) Flexible Extension Bar (1 Pc) - 1/4 × 150 Mm 4. Combination Spanners (17 Pcs) - Sizes: 6, To 24 Mm 5. Flare Nut Spanners (5 Pcs) - Sizes: 8×10, 10×12, 11×13, 12×14, 17×19 Mm 6. Hex Key Set (10 Pcs) - Sizes: 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14 Mm 7. Machinist Hammer (1 Pc) - 300 G With Fiberglass Or Wooden Handle 8. Combination Pliers (1 Pc) - 7 9. Locking Pliers (1 Pc) - 10 Curved Jaw Lock Wrench 10. Slotted Screwdrivers (2 Pcs) - Sl6.5 × 100 Mm And Sl6.5 × 150 Mm 11. Phillips Screwdrivers (2 Pcs) - Ph2 × 100 Mm And Ph2 × 150 Mm 12. Stubby Screwdrivers (2 Pcs) - Ph2 × 38 Mm And Sl6.5 × 38 Mm All Sockets, Spanners, And Ratchets Shall Be Made From Chrome Vanadium Steel (Cr-V), Heat-Treated, And Chrome-Plated For Corrosion Resistance. Screwdriver Bits Shall Be Of S2 Alloy Steel For High Torque Resistance. Ratchets Shall Have A Minimum Of 45 Teeth With A Quick-Release And Reversible Mechanism. All Tools Shall Conform To Din / Iso Standards Or Equivalent. Suitcase Colour Should Be Standard Industrial Colour (Black / Blue / Grey Or Similar) , Tee Spanner Set Including Spanners Ranging From 8 Mm To 19 Mm Made From Chrome Vanadium Steel (Cr-V), Hardened And Tempered For Durability, The Handle Shall Be T-Shaped, Providing Maximum Torque And Grip And Surface Finish Shall Be Nickel-Chrome Plated For Corrosion Resistance. , Deep Socket Set Consist Of Sockets From 8 Mm To 22 Mm, Made Of Chrome Vanadium Steel, Fully Hardened, Tempered, And Chrome-Plated, The Sockets Shall Have Six-Point Or Twelve-Point Configurations For High Torque Applications, Suitable For Use With Ratchet Handles And Extension Bars. , Combination Plier 6 Manufactured From High-Grade Alloy Steel, With Precision Machined Jaws, Cutting Edges Induction-Hardened For Long Life. Handles Shall Be Double-Dipped With Insulated Grips For Comfort And Safety. , Combination Plier 8 Manufactured From High-Grade Alloy Steel, With Precision Machined Jaws, Cutting Edges Induction-Hardened For Long Life. Handles Shall Be Double-Dipped With Insulated Grips For Comfort And Safety. , Circlip Plier Internal 7 Made Of High-Grade Alloy Steel, With Spring-Loaded Return And Polished Tips For Easy Installation And Removal Of Internal Retaining Rings, Handle Grips Shall Be Pvc Or Rubber-Coated. , Circlip Plier External 7 Made Of High-Grade Alloy Steel, With Spring-Loaded Return And Polished Tips For Easy Installation And Removal Of Internal Retaining Rings, Handle Grips Shall Be Pvc Or Rubber-Coated. , Locking Plier (Vice Grip Type) 10 With Drop-Forged Steel Jaws With Heat-Treated Teeth For Firm Gripping, Include An Adjustable Screw And Quick-Release Lever, Nickel-Plated Surface For Corrosion Protection. , Diagonal Cutting Pliers, 6, Made Of Forged Alloy Steel, With Induction-Hardened Cutting Edges And Insulated Handles Suitable For Cutting Wires And Small Metal Parts. , Long Nose Plier 6 Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 6 Overall Length, With Insulated Handles. , Long Nose Plier 8 Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 8 Overall Length, With Insulated Handles. , Adjustable Pipe Wrench Suitable For Gripping Pipes Up To 40 Mm Diameter Made Of Cast Iron Body With Drop-Forged Steel Jaws, Serrated And Induction-Hardened And Handle Painted Or Powder-Coated. , Adjustable Pipe Wrench Suitable For Gripping Pipes Up To 75 Mm Diameter Made Of Cast Iron Body With Drop-Forged Steel Jaws, Serrated And Induction-Hardened And Handle Painted Or Powder-Coated. , Heavy-Duty Pipe Wrench With Jaw Opening Up To 110 Mm Made Of Forged Alloy Steel, Precision-Machined Teeth For Firm Grip, Designed For Mechanical And Plumbing Use. , Heavy-Duty Filter Wrench With High-Tensile Rubber Or Nylon Strap And Steel Handle For Removing Large Oil/Fuel Filters, Handle Length: Minimum 300 Mm. Suitable For Heavy Machinery Maintenance. , Medium-Duty Filter Wrench With Adjustable Steel Band And Handle, Suitable For Medium-Sized Oil Filters. Chrome-Plated Finish With Non-Slip Grip. , Ball Pein Hammer With 300 Gm Forged Steel Head, Hardened And Tempered. Fitted With A Strong Fiberglass Handle Suitable For Riveting, Striking, And Metal Forming. , Soft Face Hammer With Dual Rubber Striking Faces To Prevent Surface Damage. Head Weight Approx. 300-500 Gm, Handle Made Of Fiberglass , Non-Marring Mallet Hammer With Rubber Or Plastic Head 40 Mm And Sturdy Handle. Head Weight Approx. 1 Kg. Suitable For Precision Fitting Without Metal Deformation. , Sledge Hammer With 500 Gm (2 Lb) Drop-Forged Steel Head, Hardened And Tempered. Handle Of Strong Wooden Or Fiberglass Construction, Securely Fixed To Head. , Cold Chisels Made Of Chrome Vanadium Or Carbon Steel (18 Mm Dia Approax) , Hardened And Tempered To 58-60 Hrc. Size 25 Mm, Length 300 Mm, Approax Weight 500 Gm Ground Cutting Edge With Anti-Slip Striking End. , Steel Wedges, Hardened And Ground, Used For Splitting Or Aligning. Made Of Forged Alloy Steel With A Rust-Resistant Finish 230 Mm Length 1.5 Kg. , Adjustable Torque Wrench With Working Range 25-135 Nm. Drive Size 3/8 Or 1/2, Accuracy ±4% Of Indicated Value With Reversible Ratchet And Quick-Release Mechanism. , Heavy-Duty Adjustable Torque Wrench, Range 70-340 Nm. 1/2 Drive, Accuracy ±4%, Chrome Vanadium Construction With Calibration Certificate. , High-Capacity Torque Wrench, Range 135-540 Nm. 3/4 Drive, Accuracy ±4%, Knurled Handle For Non-Slip Grip, Supplied With Protective Case And Calibration Certificate. , Measuring Tools , Steel Scale Set (5 Nos) Made Of High-Quality Tempered Stainless Steel With Etched And Permanently Engraved Graduations In Both Metric (Mm/Cm) And Inch Units. Straight, With Accurately Ground Edges And Smooth Surfaces, Graduation Accuracy Shall Conform To Is 1481:1970 Or Equivalent. Lengths : 150 Mm, 300 Mm, 600 Mm, 450 Mm, 1000 Mm. Each Scale Shall Have Clear Visibility Markings And Corrosion-Resistant Satin Chrome Finish. , Vernier Calipers Made Of Stainless Steel, Precision-Ground And Finished, With A Measuring Range Of 0-200 Mm And Least Count 0.02 Mm / 0.001 Inch Capable Of Internal, External, Depth, And Step Measurements. Vernier Scale And Main Scale Markings Shall Be Clearly Etched For Long-Term Readability. The Instrument Shall Conform To Is 3651:1981 Or Din 862 Standards. A Locking Screw Shall Be Provided For Measurement Retention, And The Tool Shall Be Supplied In A Protective Case. , Outside Micrometer (0-25 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate. , Outside Micrometer (25-50 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate. , Feeler Gauges Made Of Hardened And Tempered Spring Steel, Precision-Ground To Required Thickness, And Permanently Marked With Size Values. The Set Shall Include Multiple 75 Mm Long Blades Of 30 Different Thicknesses 0.03 Mm To 1.00 Mm Assembled In A Steel Holder With Pivot. Each Blade Shall Be Rust-Resistant And Polished For Smooth Operation. The Gauge Shall Conform To Is 3179:1982 Or Equivalent Standards. , Wire Gauge (Standard Bs 1505 Type) Manufactured From Hardened And Tempered Steel With Precisely Cut Slots For Wire Sizes 1 To 36 Swg. The Gauge Shall Be Circular Or Rectangular In Shape With Permanent Engraved Markings. The Tool Shall Comply With Bs 3737 / Is 3177 Standards For Accuracy. Surface Shall Be Satin Chrome Or Nickel Plated To Resist Corrosion Suitable For Measuring Diameters Of Wires, Rods, And Drill Bits. , Inside Calipers Shall Be Made Of Forged Steel Or Stainless Steel, Polished And Hardened. The Legs Shall Have Finely Ground Points With A Pivot Joint And Tension Adjustment For Smooth Movement. Measuring Range: 20-170 Mm Suitable For Measuring Internal Dimensions And Bore Diameters. Shall Conform To Is 3564:1985 Standards. , Outside Calipers Made Of High-Grade Carbon Or Stainless Steel With Hardened Tips, Spring Joint, And Knurled Adjustment Nut For Precision. Shall Conform To Is 3564:1985 Or Equivalent Standards. Surface Finish: Polished Or Chrome-Plated. 12 Inch Size , Centre Punch Manufactured As Per Is 7177 - 1999 Or Equivalent, Made Of High Carbon Or Alloy Tool Steel, Hardened And Tempered At The Striking End And Point. Length: Approximately 150 Mm, Approximate Weight 160 Gm With Point Angle Of 60° ± 2°. The Striking End Shall Be Chamfered To Prevent Mushrooming. Surface Finish Shall Be Black Oxide Or Polished. Suitable For Marking Centers On Metal Surfaces Before Drilling Operations. , Portable Digital Non-Contact Tachometer Of Reputed Make, With A Non-Contact Measuring Range Of Approximately 10 To 99,999 Rpm And Accuracy Not Inferior To ±0.04% ±2 Digits. Equipped With A Digital Lcd Display, Data Hold, Counting Function, And Computer/Usb Interface For Data Transfer, A Working Distance Of Around 0.2 M With A ±30° Working Angle, Reflective Tape, Interface Cable, And Carrying Case. Conforming To Iec 61010-1 / Is 13875. , Auto Electrial And Pump , Portable True-Rms Digital Multimeter Of High-Accuracy, Capable Of Measuring Ac/Dc Voltage Up To 1000 V, Ac/Dc Current Up To 10 A, Resistance, Capacitance, Frequency, Diode, And Continuity. The Meter Should Have Features Like Auto-Ranging, Data-Hold, Min/Max, And Relative Measurement Functions With A Large Back-Lit Display Of Minimum 4000 Counts Or Higher. The Instrument Shall Have Overload Protection, Fused Input Terminals, And Comply With Safety Category Cat Iii 1000 V Or Cat Iv 600 V As Per Iec 61010-1. The Unit Shall Be Housed In A Protective Insulated Casing Suitable For Field Use And Supplied Complete With Test Leads, Batteries, Protective Case, And Calibration Certificate. , Handheld Clamp Meter (True-Rms Type) Designed For Measurement Of Ac And Dc Currents Up To 1000 A, With Additional Functions For Ac/Dc Voltage, Resistance, Frequency, And Continuity. The Jaw Opening Shall Accommodate Conductors Up To 40-60 Mm In Diameter. The Meter Shall Feature A Large Digital Display, Auto-Range Selection, Data-Hold And Peak Capture Functions, And Have An Accuracy Of ±2 % Or Better. It Shall Meet Cat Iii 1000 V / Cat Iv 600 V Safety Standards, Include Overload And Transient Protection, And Be Built In A Shock-Resistant Insulated Body. The Clamp Meter Shall Be Supplied With Test Leads, Carrying Pouch, And Calibration Certificate. , Handheld Vibration Meter Shall Be Capable Of Measuring Vibration Velocity, Displacement, And Acceleration Within A Frequency Range Of 10 Hz To 1 Khz Or Higher Complying Iso 2954. The Instrument Shall Display Rms Or Peak Values In Standard Engineering Units (Mm/S, ?M, M/S²). It Shall Feature A Detachable Accelerometer Probe, Communicate With Pc Computer For Statistics And Printing By The Optional Cable And The Software. The Device Shall Be Compact, Battery-Operated, And Suitable For Predictive Maintenance Of Rotating Machinery. It Shall Be Supplied With Transducer, Magnetic Base, Extension Cable, And Carrying Case. , Wire Strippers Suitable For Removing Insulation From Copper Conductors Ranging From 0.5 Mm² To 6 Mm² , Ratchet-Type Crimping Tool Designed For Insulated And Non-Insulated Terminals 1.5 Mm² To 10 Mm², With Interchangeable Dies And Ergonomic Handles.Alloy Steel Duly Hardened & Tempered , Heavy-Duty Mechanical Or Ratchet Type Cable Cutters Suitable For Cutting Copper And Aluminium Cables Up To 300 Mm² , Soldering Iron Shall Be Of 40 W Capacity Insulated Handle. Cable Lugs And Ferrules Shall Be Of Tinned Copper, Crimp Type, Conforming To Din 46234/46235 Standards , Infrared Thermometer (Ir Gun) Shall Measure From -50 °C To +550 °C With Laser Targeting And Digital Display. Should Have Rugged, Insulated Housings And Be Supplied With Charger, Carry Case, And Calibration Certificate. , Battery Load Tester (12V) Shall Provide Controlled Load Up To 2-200 Ah To Assess Battery Condition By Measuring Voltage Drop And Internal Resistance Instruments Shall Have Clear Displays, Polarity Protection, Insulated Clamps, And Rugged Enclosures For Workshop Use. , Smart Battery Charger Shall Provide Automatic Multi-Stage Charging For 12 V Batteries With Protections For Overcharge And Polarity Reversal. , Tractor And Automobile , Manual Engine Stand Fabricated From High-Strength Heavy-Duty Mild Steel Tubular Sections, Finished With Powder Coating For Corrosion Resistance And Durability With A Lifting Capacity Of 2000 Lbs (Approximately 900 Kg), A Manual Locking Mechanism For Secure Positioning, And Four Swivel Casters For Easy Mobility And Stability. The Equipment Shall Conform To The General Safety And Design Provisions Of Is 8610:1977 (Automobile Service Equipment - Engine Stand) Or Equivalent International Standards, Ensuring Mechanical Stability, Ease Of Rotation, And Operator Safety. , Spring Compressor - Head Valve Type, Of Reputed Make Made Of High-Strength Carbon Steel With A Corrosion-Resistant Finish, Having An Overall Length Of Approximately 750 Mm And Weight Around 700 G Conforming To Relevant Standards For Hand Tools Such As Is 5781 / Is 6131 / Iso 6787 Or Equivalent. , Piston Ring Compressor (Set Of 3) Of Reputed Make, Made Of Hardened And Tempered Alloy Or Carbon Steel With A Polished Or Chrome-Plated Corrosion-Resistant Finish, And Provided With A Ratchet Or Key-Type Locking Mechanism For Uniform Compression And Easy Releasewith An Adjustable Diameter Range Suitable For Standard Engine Pistons (50 Mm To 125 Mm With 75 Mm Height, 90 Mm To 175 Mm With 100 Mm Height, And 90 Mm To 175 Mm With 150 Mm Height), Conforming To Relevant Standards Such As Is 7347 / Iso 1174 To Be Supplied Complete With Necessary Tightening Wrench Or Handle. , Portable Diesel Injector Nozzle Pop Tester, With A Dual-Scale Pressure Gauge (0-400 Bar / 0-6000 Psi), A Manual Hydraulic System With An Oil Cup Capacity Of 0.8 Litres, Constructed From High-Grade Plastic, And A Rugged Metallic Pump Body, Approximate Weight Of 4.25 Kg, Conforms To Iso 4113 (Calibration Fluid For Diesel Injection Equipment) And Iso 4008-1 / Iso 4008-2 (Diesel Fuel Injection Test Equipment - Testing Of Injection Pumps And Injectors). , Injector Puller Set (8 Pcs), Including Eight Precision-Engineered Oxidized Carbon Steel Components Comprising An Inertia Hammer, A Joint For Accessing Hard-To-Reach Areas, And Six Threaded Adapters With Sizes M12×1.75, M17×1, And M27×1, Ensuring Compatibility With Injectors From Major Manufacturers, Hammer Length Of 350 Mm All Conforms To Iso 6789:2017 (Torque Tools - Requirements And Test Methods) And Din 3122 (Hand-Operated Tools For Mechanical Drive). , Mechanical Puller (3?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 3 Inch (76.2 Mm), With A Spread Of Approximately 76 Mm, Reach Of About 65 Mm, And Working Diameter Range From 15 Mm To 80 Mm, Threaded Spindle Length 125 Mm, Conforming To Is 6149 / Iso 2985 Standards. , Mechanical Puller (8?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 8 Inch (203.2 Mm), With A Spread Of Approximately 203 Mm, Reach Of About 177 Mm, And Working Diameter Range From 30 Mm To 210 Mm, Threaded Spindle Length 174 Mm, Conforming To Is 6149 / Iso 2985 Standards. , Clutch Alignment Tool Of Reputed Make, Made Of Durable Carbon Steel, Resistant To Wear And Corrosion, And Capable Of Withstanding Repeated Workshop Use. The Tool Shall Be Adjustable Or Provided In A Set To Suit Various Pilot Bearing And Clutch Plate Diameters (Approximately 14 Mm To 28 Mm Or Equivalent Range), Conforming To Is 7347 / Iso 1174 Or Equivalent For Hand Tools, , Valve Seat & Face Cutter Set Of Seat Cutters, Face Cutters, Arbors, And Pilots (20 Nos) Of High-Grade Alloy Steel With Precision-Ground Cutting Edges, Hardened And Tempered To Maintain Cutting Efficiency, Conforms To Is 5517:1993 (Specification For Cutting Tools - General Requirements) And Iso 513 (Classification And Application Of Cutting Tool Materials) , T-Handle Spark Plug Socket Wrench (21 Mm) Carbon Steel With A Chrome-Plated Finish, With A 360-Degree Swivel Head For Flexible Operation, A Plastic Grip On The T-Handle, A Rubber Insert Within The Socket, An Approximate Weight Of 110 Grams, And Conforming To Relevant Standards For Hand Tools. , 10Pcs Carburetor Adjusting Tool Kit Including: 21-Teeth Splined, 7-Teeth Splined, Single D, Small Head Single D, Double D, Pac Man, Small Head Pac Ma,N Hexagon Shaped, Six Star, And Carburetor Cleaning Tools All Made Of High-Quality Stainless Steel Wear Resistant And Long Lasting With Ergonomic Handle Comfortable To Grip And Stable To Use. , The Heavy-Duty Spark Plug Cleaner And Tester Designed To Clean And Test Spark Plugs Under Simulated Engine Conditions, Operates On A 220 V Ac Supply And Incorporates A 12 V / 12 Kv Ignition Coil For Spark Generation And A 220 V / 12 V Electronic Vibrator For Cleaning Including A Pressurized Testing Chamber With A Working Pressure Of Up To 12 Kgf/Cm² And A Separate Abrasive Cleaning Chamber Equipped With A Double-Acting Valve For Blasting And Dust Removal, Should Be Compatible With Spark Plug Sizes M10, M12, M14, And M18 Through Interchangeable Rubber Adapters And Features A Pressure Regulator For Maintaining Safe And Consistent Operation. Product Should Conform To General Standards For Electrical Safety And Workshop Equipment, Such As Is 302 (Part 1): Safety Of Electrical Equipment, Is 10326: Automotive Service Equipment - Spark Plug Testers, Or Equivalent International Standards , Portable Fuel And Vacuum Gauge Tester Kit For Testing Fuel Pump Pressure, Fuel Pump Vacuum, Carburettor Intake, And Manifold Vacuum Systems In Petrol Engines With Dual Gauges - A Pressure Gauge Ranging From 0 To 10 Psi (0-0.7 Kg/Cm²) And A Vacuum Gauge Ranging From 0 To 28 In-Hg (0-70 Cm-Hg) - For Accurate Measurement Of Engine Fuel And Air System Performance, With Standard Automotive Fittings For Quick Connection To Various Fuel And Vacuum Lines And Conforming To Is 1446: Automotive Test Equipment - Pressure And Vacuum Gauges Or Equivalent International Standards Like Sae J1812 For Fuel System Testing Instruments. , Petrol Engine Compression Tester Kit (400 Mm) Including Threaded Adaptors In Sizes M10, M12, M14, And M18, Along With Two Rubber Cone Ends For Both Threaded And Non-Threaded Testing, Equipped With Straight And Angled Push-On Connectors And A 400 Mm Flexible Hose, To Diagnose Issues Related To Piston Rings, Valves, Or Head Gaskets, Suitable For Cars, Motorcycles, And Small Petrol Engines. , Heavy-Duty Sprocket Chain Breaker And Splitter Tool Suitable For Breaking, Splitting, And Repairing Chains Of Size 420 To 530 Made Of High-Grade Carbon Steel , Compact Chain Saw Grinder For Precise Grinding Of Chain Saw Blades For A Rated Voltage Of 220-230 V At 50/60 Hz, With An Input Power Of 300 W And A No-Load Speed Of 8400 Rpm, Equipped With A 100 Mm Grinding Wheel Suitable For Most Standard Chain Saw Chains, Weighing Around 2.5 Kg, Conforming To General Safety And Performance Standards Such As Is 302 (Part 2/Sec 201): Electrical Safety For Hand-Held Tools And Iec 60745-2-4 , Soldering Station Operating On A 220-240 V Ac, 50/60 Hz Supply, Input Power Of 60 W, With A Preheat Time Of Approximately 1 Minute, Digital Temperature Display, Adjustable And Thermostatic Temperature Control Via A Rotary Knob, Built-In Ceramic Heating Element, A Straight Tip Head, A Durable Stand For Iron Placement, Packed In A Color Box, Conforms To Iec 60335-2-45: Household And Similar Electrical Appliances - Safety Of Portable Heating Tools And Iec 61340-5-1: Protection Of Electronic Devices . , Compact, Durable, And Easy To Operate Portable High-Pressure Hand-Operated Portable Grease Pump With A 10 Kg Grease Capacity And Delivers A Material Output Of Approximately 3 Grams Per Stroke, Maximum Block Pressure Of 140 Kg/Cm², A 2-Meter High-Pressure Rubber Hose Fitted With End Connections. , Double Piston Lever Grease Gun Delivering Up To 2.4 Grams Of Grease Per Stroke, Pressures Up To 6000 Psi, With A Double-Piston Mechanism, Compact And Lightweight (Approx. 2 Kg). , Durable And Easy-To-Use Steel Lubrication Oil Dispenser Can For Smooth And Controlled Lubrication With A 500 Ml Capacity, Made From High-Quality Steel With A Powder-Coated Finish, The Can Is Lightweight (Approx. 200 G), Waterproof, And Ergonomically Designed For Comfortable Handling And Precise Oil Flow. , Power Tools And Equipment , Corded Type Electric Impact Wrench Conforming To Is 7151:1983 / Iec 60745-2-2 [Vibration (=11.5 M/S²), And Noise (104 Db(A))], With A Continuous Input Rating Of 400 W,. It Shall Provide A Maximum Fastening Torque Of 350 N·M, With A No-Load Speed Of 2000 Rpm And Impact Rate Of 2000 Blows Per Minute, 12.7 Mm (½) Square Drive, A 2.5 M Power Supply Cord. The Housing In Impact-Resistant Polymer With Reinforced Internal Metal Gear Casing, Suitable For Tightening And Loosening Ensuring Efficient Operation For Both Standard (M12-M22) And High-Strength Bolts (M12-M16) In Vehicle And Machinery Maintenance Applications , Heavy-Duty Angle Grinder, Of Reputed Make, Single Phase 220-240 V, 50/60 Hz Ac Supply, Input Power 2200 W No-Load Speed 8500 Rpm To Use With 180 Mm (7) Diameter Abrasive Wheels, And Equipped With Side Handle, Wheel Guard, And Spindle Lock A 2.0 M Power Supply Cord And Conforming To Is 7554 / Iec 60745-2-3 / Iso 11148-7 Or Equivalent Standards (Low Vibration Level (=6.5 M/S²), Sound Pressure Level Not Exceeding 91 Db(A)). , Electric Power Drill (Corded Type) Of Reputed Make, Single Phase 220-240 V, 50 Hz Ac Supply, 350 W And Variable Speed Range Up To 3000 Rpm (No Load). Including A Pistol-Grip Body, Keyed Or Keyless Chuck, And A 2.0 M Power Supply Cord Complying With Is 7554 / Iec 60745 / Iso 11148 Or Equivalent Standards, [Low Vibration (=3.0 M/S²) And Sound Pressure Level Below 80 Db(A)] Supplied Complete With Chuck Key, Side Handle (If Applicable), And Instruction Manual. , Portable Electric Heat Gun Powered By An 1800 W Motor Operating At 230 V Ac, For Adjustable Airflow Between 350-550 L/Min And A Working Temperature Range Of 60°C To 550°C, Selectable In Three Stages (60/350/550°C), Achieves Full Heat-Up Within 1 Minute, With A Heat-Resistant Plastic Body And Heat Isolation Cap, Weighs 750 G And Features A 2 M Cord Length And Conforming To Iec 60335-2-45: Household And Similar Electrical Appliances - Safety Of Portable Heating Tools And Iec 61000-3-11/12: Electromagnetic Compatibility Standards. , Portable Air Compressor, Of Reputed Make, Single Phase 230 V, 50 Hz Ac Supply, Fitted With An Electric Motor Of 2.0 Hp (1.5 Kw) A Maximum Working Pressure Of 8 Bar, Free Air Delivery Not Less Than 200 Lpm (7.2 Cfm), And A Motor Speed Of 2850 Rpm. Air Receiver Tank Of 50 Liters Capacity, Conforming To Is 5456 / Is 2825 Standards And The Compressor Shall Conform To Is 10437 / Iso 1217, And Fitted With Pressure Gauge, Safety Valve, Drain Valve, And Automatic Pressure Switch. The Complete Unit Shall Be Portable, Vibration-Damped, And Equipped With Wheels And Handle For Easy Movement. , Single Phase Annual Rate Contract Welding Machine Of Reputed Make, With Inverter-Based Igbt Technology To Be Operated On Ac 220V ±15%, 50/60 Hz Single Phase Supply And Deliver A Welding Output Current Up To 400 Annual Periodical Maintenance With A Duty Cycle Of Not Less Than 60%, An Efficiency Of Minimum 80% And Power Factor Not Less Than 0.73, With Insulation Class F And Protection Grade Ip21 As Per Is 2879 / Is 3024 Or Equivalent International Standards. And Necessary Accessories Such As Welding Cable, Electrode Holder, And Earth Clamp Etc. Should Be Included. , Mig (Metal Inert Gas) Welding Machine Of Reputed Make, Operate On Single Phase Ac 220V ±15%, 50/60 Hz Having An Output Current Range Of 20-300 Annual Periodical Maintenance With A Duty Cycle Not Less Than 60%, No-Load Voltage Of Approximately 60 V Rated Input Current Of About 19.8 A, Power Factor Not Less Than 0.93, Efficiency Of At Least 85%, Housing Protection Shall Be Minimum Ip21 Conforming To Class F, And, As Per Is 10178 / Is 2879 / Is 3024 , Bench Grinder, Of Reputed Make, Single Phase 220-240 V, 50 Hz Ac Supply Equipped With A 350 W Induction Motor Of 2950 Rpm. Two 200 Mm Diameter Grinding Wheels Each Provided With Eye Shields And Wheel Guards, Heavy-Duty Aluminum Base With Tool Rest, Tool Storage Box, And Safety Accessories Etc. Complete Conforming To Is 302 / Is 6932 / Iec 61029 Or Equivalent. , Furniture And General , Bench Vice Of Heavy-Duty Engineers Type, Suitable For Fitting And General Workshop Applications With Jaw Width 125 Mm (5 Inches), With Replaceable Serrated Hardened Steel Jaws For A Firm Grip On Workpieces, The Body And Sliding Jaw Shall Be Made From High-Grade Cast Iron Or Forged Steel, Precision Machined To Ensure Smooth Operation And Alignment. The Vice Shall Be Equipped With A Large-Diameter Acme-Threaded Spindle And Steel Handle With Knurled Ends For Easy Tightening (1600 Kg Tightening Force) And Release. The Vice Includes A 360° Swivel Base With Locking Mechanism, Allowing Positioning And Adjustment As Required During Work. The Anvil Surface On The Rear Shall Be Machined And Hardened, Suitable For Light Hammering Operations. The Vice Shall Have A Clamping Capacity Of At Least 150 Mm, And All Moving Parts Shall Be Protected Against Rust And Corrosion By Paint Or Plating. The Bench Vice Should Be Suitable For Mounting On Heavy-Duty Wooden Or Steel Workbenches And Capable Of Withstanding Heavy Mechanical Use In Workshops And Maintenance Facilities. It Shall Conform To Is: 2586 (Specification For Bench Vices, Heavy Duty) Or Equivalent Standard. , Removable And Corrosion-Resistant Drip Tray Of Size 1200 Mm (L) × 600 Mm (W) × 40 Mm (H) Fabricated From Galvanized Steel Sheet Of Minimum 1.6 Mm Thickness Or 304-Grade Stainless Steel, Ensuring Long Service Life And Resistance To Rust And Chemical Attack, Suitable To Collect Oil, Fuel, And Coolant Spills During Small Engine Maintenance Operations. The Edges Should Be Folded And Reinforced To Prevent Deformation And Improve Rigidity, The Corners Shall Be Welded And Leak-Proof, And The Base Shall Be Slightly Inclined (1-2° Slope) To Facilitate Drainage. It Should Include A Removable Drain Plug Or Outlet Provision (½ Bsp) For Easy Cleaning And Disposal Of Collected Fluids. The Surface Shall Be Smooth, Easy To Clean, And Oil-Resistant, Suitable For Workshop Environments Handling Petrol And Diesel Engines. , Heavy-Duty Roller Tool Cabinet With 4 Drawers And One Cupboard Suitable For Use In Mechanical, Workshops For Organized Storage Of Hand Tools, Instruments, And Accessories Made Of High-Quality Cold-Rolled Steel Sheet With A Cabinet Body Thickness Of 0.8-1.0 Mm And Drawer Sheet Thickness Of 0.7 Mm, With An Overall Size Of 765 Mm (L) × 465 Mm (W) × 812 Mm (H) And An Overall Height Of 976 Mm Including Casters. Drawers Of Size 536 Mm (L) × 410 Mm (W) × 74.5 Mm (H), Mounted On Precision Ball-Bearing Slides And The Top Panel Area Should Be Suitable For Tool Placement During Maintenance Work. The Unit Should Be Mounted On Four Heavy-Duty Casters Of Size 5? × 2?, Two Of Which Shall Be Swivel Casters With Locking Brakes For Easy Mobility And Stability During Use. The Cabinet Shall Include A Central Locking System For All Drawers, Should Be Surface-Treated With Powder Coating For Corrosion Resistance And A Smooth Finish. The Tool Cabinet Shall Conform, Where Applicable, To The General Guidelines Of Is 7155 (Industrial Trolleys And Cabinets) And Iso 9001:2015 Quality Manufacturing Standards. , Oil Drain Pan Made Of High-Density Polyethylene (Hdpe) With A Capacity Of 16 Litres Including Integrated Handles, A Pouring Spout, And Anti-Spill Lips To Prevent Leakage During Draining Suitable For Chemical Resistance To Engine Oil, Transmission Fluids, And Coolants. , Oil Drain Pan Made Of High-Density Polyethylene (Hdpe) With A Capacity Of 8 Litres Including Integrated Handles, A Pouring Spout, And Anti-Spill Lips To Prevent Leakage During Draining Suitable For Chemical Resistance To Engine Oil, Transmission Fluids, And Coolants. , Rack For Batteries, Made Of Well-Seasoned Hardwood Or Marine Plywood With Sturdy Ms Frame Or Wooden Supports. Includes 3-4 Ventilated Shelves With Acid-Resistant Coating And Removable Rubber Or Pvc Mat. Designed To Hold Multiple Batteries Safely And Prevent Corrosion. Approx. Size: 1500 Mm × 1000 Mm × 450 Mm. , Rack For Lubricants Constructed From Treated Wood Or Plywood Frame With Raised-Edge Shelves To Contain Spills. Each Shelf Shall Carry At Least 100 Kg And Be Coated With Oil-Resistant Paint. Suitable For 1-20 L Containers. Approx. Size: 1800 Mm × 1200 Mm × 450 Mm. , Rack For Spares Fabricated From High-Quality Wood Or Plywood With Ms Reinforcement. Includes Adjustable Or Fixed Shelves (3-5 Tiers), Each Supporting Up To 150 Kg (Udl). Finished With Protective Paint Or Polish For Workshop Use. Approx. Size: 2000 Mm × 900 Mm × 450 Mm. , Industrial Wet And Dry Type Vacuum Cleaner With A Power Rating Of 1500 W And Operating Voltage Of 220-240 V, 50 Hz, Suitable For Workshop And Service Bay Cleaning Applications With A Capacity Of 35 Litres, A Vacuum Suction Pressure Of 200 Mbar And An Airflow Rate Of 53 L/S, Ensuring High-Efficiency Dust And Liquid Removal. The Tank Should Be Made Of Corrosion-Resistant Stainless Steel (Minimum Ss 304 Grade) With Heavy-Duty Caster Wheels For Mobility. It Should Be Provided With A Flexible 5 M Power Cable, Washable Filters, Blower Function, And Accessories For Both Wet And Dry Operation. The Vacuum Cleaner Shall Conform To Iec 60335-2-69 (Safety For Wet And Dry Vacuum Cleaners For Commercial Use) Or Equivalent Indian Standard Is 11621:1986, And Include Overload And Thermal Protection Features For Motor Safety. , Portable, Electric-Operated Industrial Pressure Washer Conforming To Iec 60335-2-79 / Is 8442 With A Power Rating Of 1700 W (230 V, 50 Hz Single-Phase Supply) And A Maximum Working Pressure Of 130 Bar And A Flow Rate Of 7 Litres Per Minute, With Self-Priming Capability Of 0.5 M, High-Pressure Foam Detergent System, 6 M Pvc Hose, Manual Hose Reel, 5 M Power Cable, 3-In-1 Nozzle And Ergonomic Handle , Industrial Locker Cabinet (24-Door Type), Fabricated From 22-Gauge Mild Steel Sheet Pre-Treated And Powder-Coated For Corrosion Resistance And Smooth Finish With A Rigid Frame Structure, Each Locker Compartment With Individual Mechanical Key Locks Shall Measure Approximately 18 (D) × 12 (W) × 12 (H), With A Total Cabinet Size Of About 18 (D) × 48 (W) × 78 (H). A Load Capacity Of Minimum 10 Kg Including Ventilation Slots And Numbering Provision For Each Compartment , Safety , Abc Powder Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4 Kg Suitable For Class A Fires. Dry Chemical Powder (Mono Ammonium Phosphate) Based, Stored Pressure Type With Working Pressure Of 15 Bar, Suitable For Electrical And Combustible Material Fires.Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Co2 Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4.5 Kg Suitable For Class B Fires . Carbon Dioxide Gas Type With Seamless High-Pressure Steel Cylinder Conforming To Is 7285, Discharge Hose With Horn, And Designed For Electrical And Flammable Liquid Fires. Extinguisher Sould Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Foam Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 9 L, Suitable For Class C Fires. Stored Pressure Or Cartridge Type Using Aqueous Film-Forming Foam Suitable For Flammable Liquid Fires. Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Fire Blanket Shall Be Made Of 840 Gsm Glass Fiber Or Kevlar-Coated Woven Fabric, Resistant To Temperatures Up To 550°C, Conforming To Is 11871 / Bs En 1869, And Provided In A Quick-Release Wall-Mount Case. Standard Blanket Size: 2.00 M × 1.00 M For Personnel Protection And Small Fire Suppression. , First Aid Box Of Size 32.5(H) X 28.5(W) X 8(D) Cmshall Conform To Is 13154 (Part 1-3), Made Of Powder-Coated Metal, Gi Or Abs Plastic, Waterproof And Corrosion Resistant, To Keep All Essential Medical Supplies For Industrial Workshops (Bandages, Antiseptics, Gauze, Adhesive Strips, Scissors, Burn Cream, Splints, Sterile Pads, And Cpr Mask). , Eye Wash Station Wall Mount Type, Made Of Stainless Steel Push Plate 12.7 Mm (1/2 Inch Bsp) Inlet, 4810 Ss, Providing Continuous Flow At 1.5 L/Min Per Outlet, Operated By A Push Plate, Complying With Ansi Z358.1 / Is 10592. , Foldable Stretcher Shall Be Lightweight Aluminum Or High-Tensile Steel Frame With Washable Canvas Sheet, Capable Of Carrying 120 Kg Load, Fitted With Safety Straps And Rubber Handles, Conforming To Is 1904 / En 1865. , Ppe: Helmets Hdpe Or Abs Shell, Is 2925 Compliant, Chin Strap, Sweatband, Impact-Resistant Up To 50 Joules. , Ppe: Goggles Polycarbonate Lenses, Anti-Scratch And Uv-Resistant, Is 5983 / En 166 Compliant, Side Shields. , Ppe Industrial Gloves: For Mechanical Work-Leather Or Nitrile (Is 6994); For Chemical Work-Pvc/Neoprene (En 374); For Electrical Insulation-Rubber Class 0 (Is 4770). , Ppe: Safety Boots Confirming To Is 15298 / En 20345 Compliant, Steel/Composite Toe Cap (200 J Impact), Oil- And Slip-Resistant Sole, Steel Mid Sole Antistatic. , Ppe: Protective Overalls With 100% Cotton 210 Gsm Or Fire-Retardant Fabric, Full-Sleeve, High-Visibility Reflective Tapes Per Is 15748 / En 20471. , Electrical Insulated Gloves Conforming To Is 4770 / Iec 60903, Suitable For Class 0 (1000 V Ac / 1500 V Dc) Electrical Protection, Made Of High-Dielectric Natural Rubber, Seamless, And Rolled Cuff Type. Each Glove Shall Undergo Routine Dielectric Test At 5 Kv For 1 Minute With No Puncture Or Flashover. The Gloves Shall Be Category Rc (Resistant To Acid, Oil, Ozone, And Low Temperature) And Provided With A Cotton Inner Liner And Storage Pouch. Supplied With Test Certificate Indicating Batch Number, Test Voltage, And Date. , Welding Face Shield Suitable For Full-Face Protection During Welding, Grinding, And Metal Fabrication Works With A Shield Size Of Approximately 9 X 12, Made Of Durable Polypropylene Providing High Impact, Heat, And Corrosion Resistance. The Face Shield Shall Include An Adjustable Ratchet-Type Headgear With Multiple Adjustment Positions To Ensure A Secure And Comfortable Fit For Prolonged Use. The Approximate Weight Shall Be 1.5 Kg Or Less, And The Product Shall Be Supplied As One Complete Unit. The Face Shield Should Conform To General Industrial Safety Standards Suitable For Use In Workshops. , Industrial-Grade Welding Gloves Suitable For Providing Protection, Comfort, And Dexterity During Welding, Cutting, And Metal Fabrication Operations, Made From Premium Split Leather (Cowhide Or Goatskin) With A Minimum Thickness Of 1.2 Mm, Offering High Resistance To Heat, Sparks, And Mechanical Abrasion. The Inner Lining Shall Be Made Of Soft Flame-Retardant Cotton Or Fleece, Providing Insulation Against Heat And Comfort For Prolonged Use. Each Glove Shall Have Reinforced Palm And Finger Patches For Added Durability And Better Grip While Handling Tools And Hot Metal Objects. The Gloves Should Be Stitched With Heat-Resistant Thread To Prevent Seam Failure During Exposure To High Temperatures. The Length Shall Not Be Less Than 14 Inches (350 Mm), Ensuring Full Hand And Wrist Protection, With Extended Cuffs To Safeguard The Lower Forearm Against Welding Spatter And Radiant Heat. The Gloves Should Be Conformed To En 388 (Mechanical Risks) And En 407 (Thermal Hazards) Or Equivalent Indian Standards (Is 6153). They Shall Be Suitable For Mig, Tig, Arc, And Gas Welding Operations. Should Be Heat And Flame-Resistant, Puncture And Tear-Resistant, And Designed For Repeated Use In Demanding Industrial Environments. The Pair Shall Be Supplied In Standard Size (Large/Universal Fit) And Shall Bear Proper Labeling Indicating Brand, Size, And Conformity To Relevant Standards. , Lifting And Hoisting , Heavy-Duty, Low-Profile Type Hydraulic Trolley Jack Suitable For Lifting Vehicles Or Machinery Up To A Rated Capacity Of 3 Tons. The Jack Shall Be Constructed From High-Grade Steel With Welded Frame For Superior Strength And Stability, A Lifting Range From Approximately 130 Mm To 465 Mm, Operated Through A Hydraulic Lifting Mechanism Actuated By A Detachable Pump Handle. Should Be Equipped With A Safety Overload Valve To Prevent Lifting Beyond Rated Capacity, And Precision Hydraulic Seals To Prevent Oil Leakage. The Unit Shall Feature A 360° Swivel Rear Caster And Wide Front Wheels For Easy Maneuverability. The Saddle Shall Be Grooved Or Rubber-Coated For Secure Load Contact. The Jack Shall Conform To Is 7620 / Asme-Pase Or Equivalent Standards, And Shall Be Finished With Corrosion-Resistant Powder Coating. Supplied Complete With Hydraulic Oil Filled And Ready For Use. , Industrial-Grade, Floor-Operated Type Hydraulic Trolley Jack Suitable For Lifting Heavy Vehicles, Machinery, Or Agricultural Equipment Up To A Maximum Capacity Of 5 Tons. The Construction Shall Be Of Robust, All-Steel Design With Reinforced Chassis And Welded Seams For Durability. It Shall Have A Lifting Range From Approximately 150 Mm To 500 Mm, Operated By A Long Detachable Handle Providing Sufficient Leverage For Smooth Lifting. The Hydraulic System Shall Incorporate A Safety Overload Bypass System, Precision Machined Piston And Pump For Consistent Performance, And A Reliable Lowering Control Valve For Controlled Descent. The Jack Shall Be Equipped With Steel Swivel Casters, Wide Stance For Stability, And A Saddle Plate With Anti-Slip Surface. The Surface Finish Shall Be Rust-Resistant Enamel Or Powder Coating. The Unit Shall Comply With Relevant Is/Ansi/Ce Safety Standards, Factory-Tested For Rated Load, And Supplied Ready For Workshop Service. , The Hydraulic Bottle Jack Of 10-Ton Rated Capacity, Suitable For Lifting Tractors, Vehicles, Or Heavy Structures. The Jack Body Shall Be Made Of High-Tensile Steel With Precision Machining For Durability And Stability. It Shall Have A Lifting Range From Approximately 200 Mm To 400 Mm, Incorporating A Screw Extension On The Ram For Height Adjustment. The Hydraulic System Shall Be Fitted With A Built-In Safety Overload Valve And High-Quality Seals To Prevent Leakage. The Operating Handle Shall Be Detachable And Designed For Easy Pumping Action. The Base Shall Be Wide And Stable To Ensure Safety During Lifting Operations. The Jack Shall Conform To Is 10672 / Asme B30.1 Or Equivalent Standards, And Finished With Corrosion-Resistant Paint. Supplied Fully Assembled, Tested, And Filled With Hydraulic Oil. , The Jack Stands Shall Be Of Heavy-Duty Ratchet Or Pin-Lock Type, Designed To Support Loads Up To 3 Tons Per Pair. Each Stand Shall Be Fabricated From High-Grade Steel With A Broad, Stable Base And A Ratcheting Support Column Providing Positive Load Engagement. The Height Adjustment Range Shall Be Approximately 290 Mm To 430 Mm, With Fine-Tooth Ratchet Mechanism Or Pin-Lock System Ensuring Secure Positioning. Each Stand Shall Include A Safety Locking Mechanism To Prevent Accidental Lowering Under Load. The Saddle Shall Have A Contoured Top For Stable Seating Under Vehicle Lifting Points. All Structural Components Shall Be Fully Welded And Finished With Corrosion-Resistant Powder Coating. The Stands Shall Meet Asme-Pase / Ansi Pald Or Equivalent Safety Standards. Supplied As A Matched Pair, Factory-Tested For Load Stability And Mechanical Integrity. , The Hydraulic Engine Hoist Shall Be A Foldable, Mobile Workshop Crane With A 2 Ton Rated Lifting Capacity, Suitable For Lifting, Removing, And Installing Vehicle Engines Or Heavy Assemblies. The Frame Shall Be Made Of High-Strength Steel Sections With A Reinforced Boom, Hydraulic Lifting Ram, And Heavy-Duty Castor Wheels For Mobility. The Boom Shall Have Adjustable Reach Positions (E.G., 500 Kg, 1000 Kg, 1500 Kg, 2000 Kg) With A Lifting Range Of Approximately 0 - 2300 Mm. The Hydraulic Ram Shall Be Operated Via A Detachable Handle And Equipped With A Safety Overload Valve To Prevent Overloading. The Hoist Shall Feature A Folding Design For Space-Saving Storage, And A 360° Swivel Hook With Safety Latch For Secure Load Handling. The Finish Shall Be Industrial Enamel Or Powder-Coated For Corrosion Protection. The Equipment Shall Comply With Is 7631 / Asme B30.20 / Ce Standards And Supplied Ready For Operation. , The Tractor Splitting Stand Shall Be Designed For Safe Splitting And Assembly Of Tractors During Clutch Or Transmission Repairs. The Unit Shall Consist Of Two Independent Rolling Stands, One Front And One Rear, Each With Adjustable Height And Wheel-Mounted Base To Facilitate Easy Alignment And Movement Of Tractor Halves. The Front Cradle Shall Support The Clutch Housing Or Engine Section, While The Rear Stand Supports The Transmission Or Rear Axle Section. Both Stands Shall Be Constructed From Heavy-Duty Fabricated Steel Sections With Mechanical Screw Or Hydraulic Lifting Arrangements Providing A Height Range Of 400 Mm - 800 Mm. The Stands Shall Be Fitted With Locking Pins, Adjustable Supports, And Safety Chains To Prevent Accidental Movement. Load Capacity Shall Be Minimum 2 Tons Per Pair. The Entire Unit Shall Be Powder-Coated For Durability And Conform To Workshop Safety Standards For Agricultural Machinery Maintenance. , The Transmission Jack Shall Be A Hydraulic Telescopic Type Suitable For Removing And Installing Vehicle Transmissions Or Gearboxes From Underneath The Lift. The Rated Load Capacity Shall Be 0.5 Ton, With A Lifting Range Of Approximately 1100 Mm To 1900 Mm. The Lifting Mechanism Shall Be Actuated By A Foot-Operated Hydraulic Pump For Hands-Free Operation. The Tilting Head Plate Shall Provide Front, Rear, And Side Adjustment Through Fine-Thread Screws To Aid Alignment During Installation. The Base Shall Be Wide And Equipped With Four Swivel Castor Wheels For Stability And Maneuverability. The Unit Shall Have A Safety Overload Valve, Heavy-Duty Hydraulic Seals, And A Controlled Lowering Valve. It Shall Conform To Asme Pase / En 1494 Standards And Be Supplied Fully Assembled And Oil-Filled. , The Chain Block Shall Be A Manual, Hand-Operated Lifting Device Of 2 Ton Rated Capacity, Suitable For Workshop And Field Lifting Applications. It Shall Have A Mechanical Gear System Enclosed In A Steel Casing, Operating A Load Chain Made Of Grade 80 Alloy Steel With High Tensile Strength. The Standard Lift Height Shall Be 3 M - 6 M, With An Option For Extended Lift Lengths. The Mechanism Shall Incorporate A Load Brake With Dual Pawls For Positive Load Holding And Safety Hooks With Safety Latches At Both Ends. The Hand Chain Shall Run Smoothly On Precision-Machined Sprockets. The Unit Shall Conform To Is 3832 / Asme B30.16 / En 13157, With Load Testing Certificates And Corrosion-Resistant Paint Finish.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Kerala View Result →
25.
Educational and Research Institute #9661617 AOC
Library Books , Design Of Machine Elements , Bhandari.V.B;4 Ed; Tata Mcgraw Hill ; 2016 , Machine Design ; Sundaramoorthy; Latest; Anuradha Publications; 2003 , Dimensional Metrology; Dotson Connie; 1 Ed ; Thomson Delmar ; 2012 , Handbook Of Dimensional Measurements ; Mark Curtis, 5 Ed; Industrial Press; 2013 , Automation, Production System And Computer Integrated Manufacturing ; Mikell P.Groover; 4Ed; Phi; 2014. , Cad/Cam/Cim ; P.Radhakrishnan;3Ed; New Age Int; 2008 , Material Science And Metallurgy ; O.P.Khanna; Latest; Dhanpat Rai ; 2014 , Engineering Materials And Metallurgy;R.K. Rajput; Latest; S Chand , Material Science & Engineering ;William & Collister; Latest; Wiley; 2014 , Engineering Thermodynamics ;P.K Nag; 6Ed; Tata Mch; 2017 , Engineering Thermodynamics ;Natarajan.E;2Ed; Anuragam ; 2014 , Power Plant Engineering ; P.K Nag ; Latest ;Tata Mcg Hill:2008 , Text Book Of Power Plant Engineering;R.K. Rajput; Latest; S Chand ; 2016 , Engineering Mechanics ;Beer And Johnston; 12Ed; Tata Mcg Hill ; , Manufacturing Engineering And Technology;Kulpakjian;4Ed; Pearson India ; 2013 , Hydraulics And Fluid Mechanics ;Modi P.N & Seth;22Ed;Standard Book House;2019 , Fluid Mechanics Including Hydraulic; Jain A K; Latest; Khana 2014. , Practical Non Destructive Testing ;Baldev Raj Etc; 3 Ed; Alpha Science Int. 2002 , Surveying ;Dr.B.C. Punmia, Ashok K.Jain And Arunk.Jain ; (16Th Ed) Vol. I & Ii ; Lakshmi Publication Pvt. Ltd New Delhi; 2016. , Ground Improvement Techniques ; Dr.P.Purushothamaraj Lakshmi Publications , Ground Improvement Techniques ; P.Kavitha And K.Mohan; R-2021; Magnus Publications , Water Supply And Waste Water Engineering; S.Herald Lessly; Magnus Publication. , Water Supply Engineering (Environmental Engineering Vol I ) ; Khanna Publications. , Waste Water Engineering (Environmental Engineering Vol. Ii); S.K.Garg; Khanna Publishers. , Design Of Reinforced Concrete Structures (Is 456-2000); N.Krishnaraju; 3Rd Ed Cbs Publication And Distributors. , Hydrology And Water Resource Engineering (Irrigation And Water Power Engineering) Dr.B.C.Punmia, (16Th Ed) Lakshmi Publication Pvt Ltd New Delhi 2016 , Structural Dynamics And Earthquake Engineering (Structural Dynamics And Seismic Design) S.R.Damodarasamy, S.Kavitha, Phi Publication Pvt Ltd , “Engineering Mechanics – Statics And Dynamics” ; Vela Murali; Oxford University Press , 2018 , Vector Mechanics For Engineer: Statics And Dynamics ; Beer Ferdinand P, Russel Johnstanjr , David F Mazurek, Philip J Cornwell, Sanjeev Sanghi, 11Th Ed Mcgraw Higher Education , 2017. , Human Value And Ethics ; Research Methodology For Natural Science By Sokmitrabanarjee, Iisc Press, January 2022. , Research Methodology And Ipr Catherine J.Holland , “Inkelletual Property Patents, Trademarks, Copyright Trade Secrets”, Entrepreneur Press, 2007. , “Essentials At Bridge Engineers”, Johnson Victor. D ; 6Th Ed , Oxford And Ibh Publishing Co .New Delhi , 2018. , “Design Of Bridges” Krishnaraju N, 4Thed , Oxford And Ibh Publishing Co.Neew Delhi , 2018. , Construction Material Technology K.Arun, Dr.R.Saravanan, Suchitra Publications. , Concrete Technology - Theory And Practice, Shetty.M.S. Jain A K., S.Chand And Company, Eighth Ed, 2019. , Rehabilitation Of Concrete Structures ,B.Vidivelli,, Standard Publishes Distribution.1St Ed 2009. , Precast Concrete Structures, Alfred Steinle, Hubert Bachmann, Mathias Tillmann, Philip Thrift ., Ernst & Sohn, Berlin, 2019. , Precast Concrete- Materials, Manufacture, Properties And Usage , Lewitt,M., ,Crc Press, 2019. , ‘Estimating And Costing In Civil Engineering’ ,B.N Dutta, Twenty Eighth Revised Ed, , Cbs Publishers & Distributors (P) Ltd, 2020. , ‘Civil Engineering Contracts And Estimates’, B.S.Patil, , 7Th Ed, University Press, 2015. , Structural Analysis,Vol.1,& 2, Bhavikatti, S.S , Vikas Publishing House Pvt.Ltd.New Delhi-4, 2014. , Structural Analysis (Vol. I, Ii, Iii), Dr. R. Vaidyanathan;Dr. P. Perumal, 4Th Ed, Laxmi Publications Pvt. Ltd. 2023. , Theory Of Structures , Punmia.B.C, Ashok Kumar Jain & Arun Kumar Jain, Laxmi Publications, New Delhi, 2004. , “Introduction To Geographic Information Systems”,Kang - Tsung Chang,2Nd Ed, 2011, Mcgraw Hill Publishing. , Fluid Mechanics And Hydraulic Machines, R.K.Bansal,9Ed,Lakxmi Purblication,2010 , Theory Of Machines, S.S. Rattan , 5 Ed, Mcg Hill, 2021 , Manufacturing Technology, P N Rao, 5 Ed, Mcg Hill,2023 , Engineering Mechanics (Short Questions And Answers), Sankar Asubramani A.N,3 Ed, S Chand,2000 , Engineering Thermodynamics, P.K. Nag , 8 Ed, Tata Mcg Hill,2017 , Transport Management, John Duke, 4 Ed, Mch Hill,2010 , Automotive Engines, John B.Heywood, 1 Ed, Mcg Hill,2017 , Engine And Vehicle Management Systems, Eric Chowanietz, 4 Ed, Sae Publication,2017 , Fundamentals Of Management, Stephen A. Robbins , 7 Ed, Pearson, 2016 , Industrial Engineering And Production Management, Martand Telsang, 1 Ed, S Chand, 2018 , Internal Combustion Engines, V. Ganesan, Ed 4, Tata Mcg Hill,2014 , A Text Book Of Machine Design, Khurumai & Gupta, Ed 25, Eurasia Publishing,2020 , Automobile Chassis Design, Dean Averns , 1 Ed, Liffe & Sons ,2009 , Two And Three Wheler, Thruv U Panchal, 1 Ed, Phi India,2015 , Mechatronics, Rk Rajput, Ed 16, Kanna,2017 , Automotive Electrical And Electronics Stystems, A K Babu, 16 Ed, Kanna,2016 , Non Conventional Energy Sources, Rai G D,4 Ed, Khanna,2021 , Basic Electrical And Electronics Engineering ;Kothari Dp And I.J Nagrath ; Second Edition ;Mcgraw Hill Education, 2020 , Basic Electrical And Electronics Engineering; S.K.Bhattacharya ; Second Edition, 2017 ; Pearson Education ; 2017 , A Textbook Book Of Applied Electronics ; Sedha R.S ;2008; S. Chand & Co; 2008 , Dorf’S Introduction To Electric Circuits ; James A .Svoboda, Richard C. Dor; 2018 ; Wiley ; 2018 , A Course In Electrical & Electronic Measurements & Instrumentation ; A.K. Sawhney, Puneet Sawhney ; 2015 ; Dhanpat Rai And Co; , Principles Of Electromagnetics; Mathew N. O. Sadiku; 6Th ,2015; Oxford University Press; 2015 , Engineering Electromagnetics; William H. Hayt And John A. Buck; 2014; Mcgraw Hill Special Indian; 2014 , Electromagnetics With Applications; Kraus And Fleish; 5Th,2010; Mcgraw Hill International Editions ; 2010 , Digital Logic And Computer Design; Morris Mano.M; 3Rd,2005; Prentice Hall Of India; 2005 , Digital Principles And Design; Donald D.Givone; 1St,2003; Tata Mcgraw Hill; 2003 , Digital Fundamentals; Thomas L Floyd; 11Th,2018; Pearson Education Limited; 2018 , Microelectronic Circuits; Sedra And Smith; 7Th,2017; Oxford University Press; 2017 , Electric Machinery; P. S. Bimbhra; 2Nd,2021; Khanna Publishers; 2021 , Basic Concepts In Environmental Management; Mackenthun, K.M; 1998; Lewis Publication; 1998 , Engineering Applications In Sustainable Design And Development ; Bradley. A.S; Adebayo, A.O., Maria; 2015; Cengage Learning; 2015 , Power System Engineering; D.P.Kothari, I.J. Nagarath; 3Rd 2019; Mc Graw-Hill Publishing Company; 2019 , Electrical Power Systems; C.L.Wadhwa; 7Th 2022; New Age International Ltd; 2022 , Electric Power Generation, Transmission And Distribution; S.N. Singh; 2Nd 2008; Prentice Hall Of India Pvt.Ltd; 2008 , Op-Amp & Linear Ics; David A. Bell; 3Rd 2011; Oxford; 2011 , Linear Integrated Circuits; D. Roy Choudhary; 4Th 2018; New Age; 2018 , Op-Amps And Linear Integrated Circuits; Ramakant A. Gayakward; 4Th 2021; Pearson Education; 2021 , Electronic Instrumentation; H.S. Kals; 2010; Tata Mcgraw-Hil; 2010 , Microprocessor Architecture Programming And Application; Ramesh S. Gaonkar; 6Th 2013; Pen Ram International (P)Ltd; 2013 , The 8051 Micro Controller And Embedded Systems; Muhammad Ali Mazidi & Janice Gilli Mazidi; 2Nd 2011; Pearson Education; 2011 , The Pic Micro Controller And Embedded Systems; Muhammad Ali Mazidi & Janice Gilli Mazidi; 2010; Pearson Education; 2010 , Electric Machinery; A.E. Fitzgerald, Charles Kingsley, Stephen. D. Umans, ; 6Th 2017; Mc Graw Hill Publishing Company Ltd; 2017 , Electric Machinery Fundamentals; Stephen J. Chapman; 4Th 2017; Mc Graw Hill Education Pvt.Ltd; 2017 , Electric Machines; D.P. Kothari And I.J. Nagrath; 5Th 2017; Mc Graw Hill Publishing Company Ltd; 2017 , Electrical Machinery; P.S. Bhimbhra; 2Nd 2021; Khanna Publishers; 2021 , Power System Analysis; John J. Grainger, William D. Stevenson, Jr; 2017; Mc Graw Hill Education (India) Private Limited, New Delhi; 2017 , Power System Engineering; Kothari D.P. And Nagrath I.J.; 3Rd, 2019; Tata Mcgraw-Hill Education; 2019 , Power System Analysis; Hadi Saadat; 21St Reprint, 2010; Tata Mcgraw Hill Education Pvt. Ltd., New Delhi; 2010 , Power Electronics: Converters, Applications And Design; Ned Mohan, T.M.Undeland, W.P.Robbins; 3Rd (Reprint), 2009; John Wiley And Sons; 2009 , Power Electronics Circuits, Devices And Applications; Rashid M.H.; 3Rd Edition, 2004; Prentice Hall India, New Delhi; 2004 , Power Electronics ; Cyril. W. Lander ; 3Rd Edition 1993; Mc Graw Hill International; 1993 , Power Electronics; P.S.Bimbhra; Third Edition 2003; Khanna Publishers; 2003 , Elements Of Power Electronics; Philip T.Krein; 2013; Oxford University Press; 2013 , Power Electronics; P.C.Sen; .30Th Reprint, 2008.; Tata Mcgraw-Hill; 2008 , Automatic Control Systems; Benjamin C. Kuo; 7Th, 2010; Phi Learning Private Ltd; 2010 , Control Systems Engineering; Nagarath, I.J. And Gopal, M.; 2010; New Age International Publishers; 2010 , Power Quality Enhancement Using Custom Power Devices; Arindam Ghosh And Gerad Ledwich; First Edition,2002; Kluwer Academic Publishers; 2002 , Electric Power Quality; G.T.Heydt; Second Edition, 2011; Stars In A Circle Publications; 2011 , Power System Harmonics – Fundamentals, Analysis And Filter Design; George J. Wakileh; 2019; Springer – Verlag Berlin Heidelberg, New York; 2019 , Axial Flux Permanent Magnet Brushless Machines; Jacek F. Gieras, Dr. Rong-Jie Wang, Professor Maarten J. Kamper ; 2008; Springer Netherlands; 2008 , Switched Reluctance Motor Drives: Fundamentals To Applications; Bilgin, Berker Emadi, Ali Jiang, James Weisheng; 2019; Crc; 2019 , Permanent Magnet Synchronous And Brushless Dc Motor Drives; .Ramu Krishnan; 2009; Crc Press, Marcel Applications; 2009 , Stepping Motors And Their Microprocessor Controls; T.Kenjo; 2009; Oxford University Press, New Delhi, 2000; 2009 , Brushless Magnet And Reluctance Motor Drives; T.J.E. Miller; 1989; Clarendon Press; 1989 , Switched Reluctance Motor Drives Modeling, Simulation, Analysis, Design, And Applications; R. Krishnan; 2017; Crc Press; 2017 , Arm System On Chip Architecture; Steve Furber; 2Nd, 2015; Addisonn Wesley; 2015 , Arm System Developer’S Guide Designing And Optimizing System Software; Andrew N. Sloss, Dominic Symes, Chris Wright, John Rayfield; 1St, 2004; Elsevier; 2004 , Arm Assembly Language’ Fundamentals And Techniques; William Hohl; 2Nd Edition 2014; Crc Press; 2014 , Switchgear And Protection; Sunil S.Rao; 4Th Edition, 2010; Khanna Publishers; 2010 , Power System Protection And Switchgear; Badri Ram ,B.H. Vishwakarma; 2Nd Edition 2011; New Age International Pvt Ltd Publishers; 2011 , Power System Protection And Switchgear; B.Rabindranath And N.Chander; 2Nd Edition, 2018; New Age International Pvt Ltd Publishers; 2018 , Switch Gear And Protection; Arun Ingole; 2018; Pearson Education; 2018 , Electric Energy Systems Theory – An Introduction; Olle. I. Elgerd; 2Nd Edition, 2017; Mcgraw Hill Education Pvt. Ltd; 2017 , Power Generation, Operation And Control; Allen. J. Wood And Bruce F. Wollen Berg; 3Rd Edition, 2013; John Wiley & Sons, Inc; 2013 , Power System Analysis Operation And Control; Abhijit Chakrabarti And Sunita Halder; 4Th Edition, 2018; Phi Learning Pvt. Ltd; 2018 , Hybrid Energy Systems; Bahman Zohuri; First Edition, 2018; Springer; 2018 , Wind Energy Conversion Systems; S.M Muyeen; First Edition, 2012; Springer; 2012 , Emerging Power Converters For Renewable Energy And Electric Vehicles; Md. Rabiul Islam,Md. Rakibuzzaman Shah,Mohd Hasan Ali;First Edition, 2021; Crc Press; 2021 , Thyristor Based Facts Controllers For Electrical Transmission Systems; R. Mohan Mathur, Rajiv K.Varma; 2002; Ieee Press And John Wiley & Sons, Inc, 2002 , Understanding Facts-Concepts And Technology Of Flexible Ac Transmission Systems; Narain G.Hingorani; 2011; Standard Publishers Distributors,Delhi-110006,2011; 2011 , High Voltage Engineering; M.S.Naidu And V. Kamaraju; Fifth - 2013; Tata Mcgraw Hill; 2013 , High Voltage Engineering Fundamentals; E. Kuffel And W.S. Zaengl, J.Kuffel; Second - 2005; Newnes, Elsevier; 2005 , High Voltage Engineering; C.L. Wadhwa; Fourth - 2020; New Age International Publishers; 2020 , The Nonreligious: Understanding Secular People And Societies; Luke W. Galen; 2016; Oxford University Press; 2016 , Secularism: A Dictionary Of Atheism, Bullivant, Stephen; Lee, Lois; 2016; Oxford University Press; 2016 , The Oxford Handbook Of Secularism; John R. Shook; 2017; Oxford University Press; 2017 , The Civic Culture: Political Attitudes And Democracy In Five Nations; Gabriel A. Almond And Sidney Verba; 1963; Princeton University Press; 1963 , Research Methodology For Natural Sciences; Soumitro Banerjee; 2022; Iisc Press; 2022 , Smart Grids Advanced Technologies And Solutions; Stuart Borlase; Second Edition,2018; Crc; 2018 , Smart Grid: Technology And Applications; Janaka Ekanayake, Nick Jenkins, Kithsiriliyanage, Jianzhong Wu, Akihiko Yokoyama; 2012; John Wiley; 2012 , Smart Grid Fundamentals Of Design And Analysis; James Momoh; 2012; Ieee Press 2012; 2012 , Fundamentals And Applications Of Renewable Energy; Mehmet Kanoglu, Yunus A. Cengel, John M. Cimbala, Cgraw Hill; First Edition (10 December 2020); Cgraw Hill; 2020 , Renewable Energy Sources And Emerging Technologies; Kothari; 2Nd Edition (1 January 2011); Prentice Hall India Learning Private Limited; 2011 , Data Warehousing, Data Mining & Olap By Alex Berson And Stephen J. Smith, Tata Mcgraw – Hill Edition , The Data Warehouse Toolkit: The Complete Guide To Dimensional Modelling By Ralph Kimball, Edition 3, John Wiley & Sons , Block Chain Basics By Daniel Drescher, Edition 1, Apress , Solidity Programming Essentials: A Beginner’S Guide To Build Smart Contracts For Ethereum And Block Chain By Ritesh Modi , , Mastering Block Chain: Deeper Insights Into Decentralization, Cryptography, Bit Coin, And Popular Block Chain Frameworks By Bashir And Imran , The Nonreligious: Understanding Secular People And Societies By Luke W. Galen 2016 Oxford University Press , Secularism: A Dictionary Of Atheism By Bullivant, Stephen; Lee, Lois 2016 Oxford University Press , The Oxford Handbook Of Secularism By John R. Shook 2017 Oxford University Press , Research Methodology For Natural Sciences By Soumitro Banerjee January 2022 Iisc Press , The Civic Culture: Political Attitudes And Democracy In Five Nations By Gabriel A. Almond And Sidney Verba, Princeton University Press , Devops: A Software Architect‘S Perspective By Len Bass, Ingo Weber And Liming Zhu, Pearson Education , Learning Robotic Process Automation: Create Software Robots And Automate Business Processes With The Leading Rpa Tool– Uipath, By Alok Mani Tripathi, Packt Publishin , Operating System Concepts By Abraham Silberschatz, Peter Baer Galvin And Greg Gagne, 10Th Edition, John Wiley And Sons Inc , Distributed Systems: Principles And Paradigms By Tanenbaum A S, Van Steen M, Pearson Education , Robotic Process Automation: Guide To Building Software Robots,Automate Repetitive Tasks & Become An Rpa Consultant By Richard Murdoch, Amazon Asia-Pacific Holdings Private Limited , Digital Design : With An Introduction To The Verilog Hdl, Vhdl, And System Verilog;M. Morris Mano, Michael D. Ciletti;6Th ; Pearson Education, 2018 , Computer Organization And Design, The Hardware/Software Interface; David A. Patterson, John L. Hennessy;6Th;Morgan Kaufmann/Elsevier, 2020 , Introducing Data Science; David Cielen, Arno D. B. Meysman, And Mohamed Ali. Manning Publications, 2016 , Statistics: Robert S. Witte And John S. Witte11 Edition Willey2017 , Python Data Science Hand Book; Jake Vander Plas; ;O’Reilly, 2016 , Data Structures And Algorithm Analysis In C Mark Allen Weiss 2Nd Ed Ed,Pearson 2005 , Introduction To Data Structure In C; Kamthane1 Ed; Pearson 2007 , Java: The Complete Reference; Herbert Schildt;11Th;Mcgraw Hill Education,2019 , Introducing Java Fx 8 Programming; Herbert Schildt;1St;Mcgraw Hill Education,2015 , Introduction To Automata Theory, Languages And Computations; Hopcroft Je Motwani R & Ullman Jd 3Ed; Pearson 2008 , Introduction To Languages And The Theory Of Computation; John C Martin;4Th;Tata Mcgraw Hill, 2011. , Artificial Intelligence – A Modern Approach; Stuart Russell And Peter Norvig;4Th;Pearson Education, 2021. , Introduction To Machine Learning; Ethem Alpaydin;4Th; Mit Press,2020 , Machine Learning; Dr.S.Sridhar, Dr.M.Vijayalakshmi, 1Ed,Oxford University Press, 2021 , Database System Concepts : Abraham Silberschatz, Henery F Korth S.Sudharshan Mchill 2020 , Fundamentals Of Database System : Ramez Elmarsri Shamkant B Navathe 7Th Ed, Pearson, 2017 , Introduction To Algorithms;Thomas H. Cormen, Charles E. Leiserson, Ronald L. Rivest And Clifford Stein;3Rd;Prentice Hall Of India, 2009 , Computer Algorithms/C++;Ellis Horowitz, Sartaj Sahni, Sanguthevar Rajasekaran;2Nd;Orient Blackswan2019 , Operating System Concepts,Ll; Abraham Silberschatz, Peter Baer Galvin And Greg Gagne;10Th;John Wiley And Sons Inc., 2018 , Modern Operating Systems; Andrew S Tanenbaum;5Th;Pearson,2022 , ‘Handbook Of Environmental Laws, Rules, Guidelines, Compliances And Standards’, Vol. I And Ii;R.K. Trivedi;38Th;Enviro Media,2010 , Environmental Encyclopaedia; Cunningham, W.P. Cooper, T.H. Gorhani; ;Jaico Publ., House, Mumbai, 2001 , Computer Networking, A Top-Down Approach Featuring The Internet; James F. Kurose, Keith W. Ross;8Th;Pearson Education, 2021 , Data Communications And Networking With Tcp/Ip Protocol Suite; Behrouz A. Forouzan;6Th; Tmh, 2022 , Cyber Security: Understanding Cyber Crimes, Computer Forensics And Legal Perspectives; Nina Godbole, Sunit Belapure;1Th;Wiley India, 2011. , Distributed Computing: Principles, Algorithms And Systems; Kshemkalyani Ajay D, Mukesh Singhal; ;Cambridge Press, 2011. , Advanced Concepts In Operating Systems; Mukesh Singhal, Niranjan G Shivaratri; ;Mcgraw Hill Publishers, 1994 , Hadoop Operations;Eric Sammer; ;O’Reilley, 2012. , Nosql Distilled;Sadalage, Pramod J; , Kamthane, Introduction To Data Structures In C, 1St Ed ,Pearson Education,2007. , Thomas H. Cormen, Charles E. Leiserson, Ronald L.Rivest, Clifford Stein, Introduction To Algorithms, 4Th Ed , Mcgraw Hill, 2022. , Oppenheim, Willsky And Hamid, “Signals And Systems”, 2Nd Ed , Pearson Education, New Delhi, 2015.(Units I - V) , Simon Haykin,Barry Van Veen,“Signals And Systems”,2Nd Ed ,Wiley, 2002 , B.P.Lathi,“Principles Of Linear Systems And Signals”,2Nd Ed ,Oxford, 2009. , M. J. Roberts, “Signals And Systems Analysis Using Transform Methods And Matlab”, Mcgraw- Hill Education, 2018. , John Alan Stuller, “An Introduction To Signals And Systems”,Thomson, 2007. , Robert L.Boylestad And Louis Nasheresky,“Electronic Devices And Circuit Theory”, 10Th Ed , Pearson Education / Phi, 2008. , Adel .S. Sedra, Kenneth C. Smith, Micro Electronic Circuits, Oup, 7Th Ed , 2014. , Donald.A.Neamen,Electronic Circuit Analysis And Design, Tata Mcgraw Hill, 3Rd Ed , 2010. , D.Schilling And C.Belove, Electronic Circuits, Mcgraw Hill, 3Rd Ed , 1989 , Muhammad H.Rashid,Power Electronics, Pearson Education/Phi, 2004 , M.Gopal, “Control System – Principles And Design”, Tata Mcgraw Hill, 4Th Ed , 2012 , J.Nagrath And M.Gopal, “Control System Engineering”, New Age International Publishers, 5Th Ed , 2007. , K.Ogata, “Modern Control Engineering”, Phi, 5Th Ed , 2012. , S.K.Bhattacharya, “Control System Engineering”, Pearson, 3Rd Ed , 2013. , Benjamin. C.Kuo, “Automatic Control Systems”, Prentice Hall Of India, 7Th Ed , 1995 , William I. Fletcher, An Engineering Approach To Digital Design, Prentice-Hall Of India,1980. , Charles H.Roth,Jr, ‘Fundamentals Of Logic Design’, Jaico Books, 4Th Ed , 2002. , Floyd T.L., Digital Fundamentals, Charles E. Merril Publishing Company, 1982. , John.F.Wakerly, Digital Design Principles And Practices, Pearson Education, 4Th Ed., , D.K. Cheng, Field And Wave Electromagnetics, 2Nd Ed., Pearson (India), 2002 2. M.N.O.Sadiku And S.V. Kulkarni, Principles Of Electromagnetics, 6Th Ed., Oxford(Asian Ed ), 2015 , Edward C.Jordan & Keith G.Balmain, Electromagnetic Waves And Radiating Systems, 2Nd Ed , Prentice-Hall Electrical Engineering Series, 2012. , W.H.Hayt And J.A.Buck, Engineering Electromagnetics, 7Th Ed. ,Mcgraw-Hill(India), 2006. , B.M. Notaros, Electromagnetics, Pearson: New Jersey, 2011 , William Stallings, Cryptography And Network Security, 7Th Ed , Pearson Education, 2017(Unit- Iv) , Bhunia Swarup, Hardware Security– A Hands On Approach, Morgan Kaufmann, First Ed , 2018.(Unit – V). , James.F.Kurose And Keith.W.Ross, Computer Networking – A Top – Down Approach, 6Th Ed , Pearson, 2017. , Doughlas .E.Comer, Computer Networks And Internets With Internet Applications, 4Th Ed , Pearson Education, 2008. , D.Roy Choudhry, Shailjain, “Linear Integrated Circuits”, New Age International Pvt.Ltd., 2018, 5Th Ed . (Unit I - V) , Sergio Franco, “Design With Operational Amplifiers And Analog Integrated Circuits”, 4Th Ed , Tata Mc Graw-Hill, 2016 (Unit I – V) , Ramakant A. Gayakwad, “Op-Amp And Linear Ics”, 4Th Ed , Prentice Hall / Pearson Education, 2015. , Robert F.Coughlin,Frederick F.Driscoll, “Operational Amplifiers And Linear Integrated Circuits”, 6Th Ed , Phi, 2001. , S.Salivahanan& V.S. Kanchana Bhaskaran, “Linear Integrated Circuits”, Tmh, 2Nd Ed , 4Th Reprint, 2016 , John G.Proakis And Dimitris G. Manolakis, Digital Signal Processing – Principles, Algorithms And Applications, 4Th Ed , Pearson Education / Prentice Hall, 2007. , V.Oppenheim ,R.W.Schafer And J.R.Buck,? Discrete-Time Signal Processing, 8Th Indian Reprint, Pearson, 2004. , Emmanuel C. Ifeachor & Barrie. W. Jervis, “Digital Signal Processing”, 2Nd Ed, Pearson Education / Prentice Hall, 2002. , Sanjit K.Mitra, “Digital Signal Processing – A Computer Based Approach”, Tata Mcgraw Hill, 2007. , Andreas Antoniou, “Digital Signal Processing”, Tatamcgrawhill, 2006. , Simon Haykins,”Communication Systems”,Wiley, 5Th Ed ,2009.(Uniti-V) , B.P.Lathi, “Modern Digital And Analog Communication Systems”, 4Th Ed , Oup, 2011. , Wayner Tomasi, Electronic Communication System, 5Th Ed , Pearson Education,2008. , D.Roody, J.Coolen, Electronic Communications, 4Th Ed Phi 2006 , B.Sklar, “Digital Communications Fundamentals And Applications”, 2Nd Ed Pearson Education 2007 , Hp Hsu, Schaum Outline Series- “Analog And Digital Communications” Tmh 2006 , Couch.L., Modern Communication Systems, Pearson,2001 , Gilbert M.Masters, ‘Introduction To Environmental Engineering And Science’, 2Nd Ed , Pearson Education, 2004. , Allen, D. T. And Shonnard, D. R., Sustainability Engineering: Concepts, Design And Case Studies, Prentice Hall. , Bradley.A.S;Adebayo,A.O., Maria, P. Engineering Applications In Sustainable Design And Development, Cengage Learning. , Environment Impact Assessment Guidelines, Notification Of Government Of India, 2006. , Cunningham,W.P.Cooper,T.H.Gorhani, ‘Environmental Encyclopaedia’, Jaico Publ., House, Mumbai, 2001. , Dharmendra S.Sengar, ‘Environmental Law’, Prentice Hall Of India Pvt. Ltd, New Delhi, 2007. , Rajagopalan, R,‘Environmental Studies-From Crisisto Cure’, Oup, 3Rd Ed , 2015. , Erach Bharucha, “Text Book Of Environmental Studies For Undergraduate Courses” Orient Blackswanpvt.Ltd.201 , Kaveh Pahlavan, “Principles Of Wireless Networks”, Phi , 2008 , Vijay K.Garg, “Wireless Network Evolution - 2G & 3G”. Prentice Hall, 2008. , Clint Smith,P.E,Dannel Collins,“3G Wireless Networks” Tata Mcgraw-Hill, 2Nd Ed , 2011. , Sassan Ahmadi,“Lte-Advanced– A Practical Systems Approach To Understanding The Gpp Lte Releases 10 And 11 Radio Access Technologies”, Elsevier, 2014. , Jonathan Rodriguez,Fundamentals Of 5G Mobile Networks, John Wiley, 2015. , Ekram Hossain, Dong In Kim, Vijayk.Bhargava, “Cooperative Cellular Wireless Networks”,Cambridge University Press, 2011. , Ekram Hossain, Vijay K.Bhargava (Editor), Gerhard P.Fettweis(Editor), “Green Radio Communication Networks”, Cambridge University Press, 2012. , F.Richard Yu,Yu,Zhang And Victor C.M.Leung“ Green Communications And Networking”, Crc Press, 2012. , Ramjee Prasad And Shingo Ohmori, Dina Simunic, “Towards Green Ict”, River Publishers,2010 , Jinsong Wu, Sundeep Rangan And Honggang Zhang, “Green Communications: Theoretical Fundamentals, Algorithms And Applications”, Crc Press, 2012 , Jan D Rabaey, Anantha Chandrakasan, “Digital Integrated Circuits: A Design Perspective”, Phi, 2016.(Units Ii, Iii And Iv). , Neil He Weste , Kamran Eshranghian, “Principles Of Cmos Vlsi Design: A System Perspective,”Addison Wesley, 2009.(Units- I, Iv). , Michael J Smith,” Application Specific Integrated Circuits, Addison Wesley, (Unit-V) , Samir Palnitkar,”Verilog Hdl: A Guide To Digital Design And Synthesis”, 2Nd Ed, Pearson Education,2003.(Unit - V) , Parag K.Lala, ”Digital Circuit Testing And Testability”, Academic Press, 1997, (Unit-V) , D.A.Hodges And H.G.Jackson, Analysis And Design Of Digital Integrated Circuits, International Student Ed , Mcgraw Hill 1983 , P.Rashinkar,Paterson And L.Singh, System-On-A-Chip Verification-Methodology And Techniques, Kluwer Academic Publishers,2001 , Samiha Mourad And Yervant Zorian, “Principles Of Testing Electronic Systems”, Wiley2000 , M.Bushnell Andv.D.Agarwal, Essentials Of Electronictesting For Digital, Memory And Mixed-Signal Vlsi Circuits, Kluwer Academic Publishers,2000 , Reinhold Ludwig And Powel Bretchko, “Rf Circuit Design” – Theory Andapplications”, Pearson Education Asia, First Ed , 2001. , D. K. Misra, “Radio Frequency And Microwave Communication Circuits”- Analysis Anddesign, John Wiley & Sons, 2004. , Richard Chi-Hsili-,“Rf Circuit Design” –A John Wiley & Sons, Inc , Publications , W.Alan Davis, Krishna Agarwal,“ Radio Frequency Circuit Design” ,Johnwilly & Sons,2001100) , Mathew M. Radmanesh, “Radio Frequency &Microwave Electronics”, Pearson Education Asia, 2Nd Ed , 2002 (Unit – V) , John D Ryder, “Networks Lines And Fields”, Prentice Hall Of India, New Delhi, 2005. (Unit I– Iv) , Annapurna Das, Sisir K. Das, “Microwave Engineering”, Mcgraw Hill Education (India) Private Limited, 3Rd Ed ,2000.(Unit – V) , Wireless Communication – Andrea Goldsmith, Cambridge University Press,2011 , Van Nee,R. And Ramji Prasad,-Ofd Mforwireless Multimedia Communications, Artech House, 2000. , David Tse And Pramod Viswanath,- Fundamentals Of Wireless Communication, Cambridge University Press, 2005. , Upena Dalal, Wireless Communication”, Oup, 2009. , Andreas.F.Molisch,?Wireless Communications”, John Wiley–India, 2006. , Edward C. Jordan & Keith G. Balmain,Electromagnetic Waves And Radiating Systems,2Nd Ed , Prentice-Hall Electrical Engineering Series, 2012. , W.H.Hayt And J.A.Buck, Engineering Electromagnetics,7Th Ed., Mcgraw - Hill(India), 2006 , B.M.Notaros, Electromagnetics, Pearson: New Jersey, 2011 , D.K.Cheng, Field And Wave Electromagnetics ,2Nd Ed., Pearson(India), 2002 , M.N.O.Sadikuand S.V.Kulkarni, Principles Of Electromagnetics, 6Th Ed.,O Xford (Asian Ed ),2015 , Holger Karl ,Andreas Willig, “Protocol And Architecture For Wireless Sensor Networks”, John Wiley Publication, 2006. , Anna Forster, “Introduction To Wireless Sensor Networks”, Wiley,2017. , Zach Shel By Sensinode And Carsten Bormann, “6Lowpan: The Wireless Embedded , Hess W., “Introduction To Space Science”, Gordon & Breach Science Pub; Revised Ed.,1968. , Krishnaswami K.S.,“Astrophysics: Amodern Perspective”, New Age International, 2006. , Arnab Rai Choudhuri, “Astrophysics For Physicists”, Cambridge University Press, New York, 2010. , Krishnaswamik.S., “Understanding Cosmic Panorama”, New Age International, 2008. , Dan W.Patterson, “Introduction To Ai And Es”, Pearson Education,2007 , Deepak Khemani, Artificial Intelligence, Tata Mc Graw Hill 2013 , Christopher M. Bishop,“Pattern Recognition And Machine Learning”, Springer, 2006. , Tom Mitchell,“Machine Learning”, Mcgraw Hill, 3Rd Ed ,1997. , Mehryar Mohri, A Fshin Rostamizadeh, Ameet Talwalkar, “Foundations Of Machine Learning”, Mit Press, 2012. , Ethem Alpaydin, “Introduction To Machine Learning”, Mit Press, 4Th Ed , 2020. , Mohammed Ali Mazidi, Janice Gillispiemazidi, Rolind.Mckinlay, The 8051 Microcontroller And Embedded Systems Using Assembly And C, 2Nd Ed , Pearson Education, 2008.(Unit -I) , Marilyn Wolf, Computers As Components – Principles Of Embedded Computing System Design, 3Rd Ed , Morgan Kaufmann, 2012.(Unit – Ii,Iii) , Arshdeep Bahga,Vijay Madisetti, Internet–Of-Things– A Handson Approach, Universities Press, 2015.(Unit – Iv,V) , Mayur Ramgir,Internet–Of– Things, Architecture, Implementation And Security, First Ed , Pearson Education, 2020. , Lyla B.Das, Embedded Systems: Anintegrated Approach, Pearson Education 2013. , Jane.W.S.Liu,Real–Time Systems, Pearson Education,2003. , Trit.Ha,“Digital Satellite Communications”,2Nd Ed , Mcgrawhill Education, 2017. , Wilbur L.Pritchard, Hendri G.Suyderhoud, Robert A.Nelson, “Satellite Communications Systems Engineering” 2Nd Ed , Prentice Hall Pearson, 2013. , M.Richharia, “Satellite Communication Systems-Design Principles”, Macmillan, 1999. , Brian Ackroyd, “World Satellite Communication And Earth Station Design”,Bsp Professional Books, 1990. , Dennis Roddy, “Satellite Communication”, 4Thed , Mcgraw Hill International,2017. , Bruce R. Elbert, “The Satellite Communication Applications”, Hand Book, Artech House Bostan London, 2003. , Timothy Pratt, Charles, W.Bostain,Jeremy E.Allnutt, Satellite Communication” ,3Rd Ed , Wiley Publications,2021. , Harold Koontzand Heinz Weihrich “Essentials Of Management” Tata Mcgraw Hill,1998. , Stephen P. Robbins And Mary Coulter, “Management”, Prentice Hall(India) Pvt. Ltd., 10Th Ed , 2009. , Robert Kreitner And Mamata Mohapatra, “Management”, Biztantra, 2008. , Tripathy Pc And Reddy Pn, “Principles Of Management”, Tata Mcgraw Hill, 1999. , Doebelins Measurement Systems: 7Th Ed (Sie),Ernest O. Doebelin Dhanesh N.Manik Mcgraw Hill Publishers, 2019. , Robert Brandy, “Automotive Electronics And Computer System”, Prentice Hall, 2001 , William Kimberley,” Bosch Automotive Handbook”, 6Th Ed , Robert Bosch Gmbh, 2004. , Bosch Automotive Electrics And Automotive Electronics Systems And Components, Networking And Hybrid Drive,5Th Ed, 2007, Isbnno :978-3-658-01783-5. , James D Halderman,“Automotive Electrical And Electronics”, Prentice Hall, Usa,2013 , Tom Denton, “Automotive Electrical And Electronics Systems,”3Rd Ed , 2004, Sae International. , Patranabis.D,“Sensors And Transducers”,2Nd Ed , Prentice Hall India Ltd,2003 , William Ribbens, Understanding Automotive Electronics - An Engineering Perspective, 7Th Ed , Elsevier Butterworth-Heinemann Publishers, 2012. , Ganesh.S.Hedge,”A Text Book Of Industrial Robotics”, Lakshmi Publications, 2006. , Mikell.P.Groover, “Industrial Robotics – Technology, Programming And Applications” Mcgraw Hill 2Nd Ed 2012. , Fu K.S. Gonalz R.C. And Ice C.S.G.”Robotics Control, Sensing, Vision And Intelligence”, Mcgraw Hill Book Co. 2007. , Yoram Koren ,“Robotics For Engineers”, Mcgraw Hill Book,Co.,2002. , Janakiraman P.A., “Robotics And Image Processing”, Tata Mcgraw Hill 2005. , John.J.Craig, “Introduction To Robotics: Mechanics And Control” 2Nd Ed , 2002. , Jazar, “Theory Of Applied Robotics: Kinematics, Dynamics And Control”, Springer India Reprint, 2010. , The Non Religious: Understanding Secular People And Societies, Luke W.Galen Oup, 2016. , The Civic Culture: Political Attitudes And Democracy In Five Nations By Gabriel A. Almond And Sidney Verba, Princeton University Press, , Research Methodology For Natural Sciences By Soumitro Banerjee, Iisc Press, January 2022. , Gate 2026 : Civil Engineering - Study Guide | 3200+ Mcqs & Ntqs, Msq Question Bank | Includes Gate Solved Papers 2023-2025 | Gate Prep Guide | With Gate Flix Test Series: Gk Publication , Gate-2026: Civil Engineering : Made Easy Publication , Gate Tutor Civil Engineering Exam 2026 | With Solved Papers 2025-23 & 5 Mock Tests By Prashant Dixhit : Arihant Publication , Gate 2026 : Mechanical Engineering - Study Guide | 3750+ Mcqs, Ntqs, Msq Question Bank | Includes Gate Solved Papers 2023-25 : Gk Publication , Gate - 2026 : Mechanical Engineering : Made Easy Publication , Gate Tutor Mechanical Engineering Exam 2026 | With Solved Papers 2025-23 & 5 Mock Tests By Er. Dinesh Nath Goswami : Arihant Publication , Gate 2026 : Electrical Engineering - Study Guide | 3000+ Mcqs, Ntqs, Msq Question Bank | Includes Gate Solved Papers 2023-25 Gk Publication , Gate - 2026 : Electrical Engineering : Made Easy Publication , Gate Tutor Electrical Engineering Exam 2026 | With Solved Paper 2025-23 & 5 Mock Tests By Prashant Bharti, Er. Bhavin Juneja, Gaurav Goel :Arihant Publication , Gate 2026 : Electronics & Communication Engineering - Study Guide | 2800+ Mcqs, Ntqs, Msq Question Bank | Includes Gate Solved Papers 2023-25 Gk Publication , Gate - 2026 : Electronics Engineering : Made Easy , Gate Tutor Electronics & Communication Engineering Exam 2026 | With Solved Papers 2025-23 & 5 Mock Tests By Ankit Goel, Alka Singh :Arihant Publication , Gate 2026 : Computer Science & Information Technology – Study Guide | 3100+ Mcqs & Ntqs | Inside Solved Paper 2023-2025 | Msq Question Bankgk Publication | Gate Prep Guide Gk Publication , Gate - 2026 : Computer Science And Information Technology : Made Easy , Gate Tutor Computer Science & Information Technology Exam 2026 | With Solved Papers 2025-23 & 5 Mock Tests By Shanti Kirupani, Prachi Jain, Amrita Mishra: Arihant Publication , Business And Professional Communication: Keys For Workplace Excellence (5Th Ed.).Miller, K. Q., & Wahl, S. T. , Sage Publications, 2023 , English Language And Communication Skills For Engineers,Kumar, Sanjay & Pushpalatha.Oup,2018 , Communication Skills For Engineers And Scientists (2Nd Ed.),Sharma, S., & Mishra, B.Phi,2024 , English Language Skills For Engineers, Koneru Aruna, Mcgraw Hill,2020 , Communication For Business: A Practical Approach, Taylor, Shirley & Chandra. V.Pearson, 2010 , Listening: B2 (Collins English For Life: Skills),Ian Badger, Et Al., Collins, 2014 , Grammar In Use, Raymond Murphy, Cambridge, 2019 , You Can Win , Life Skills 101: A Practical Guide To Leaving Home And Living On Your Own , Personality Development & Soft Skills (3Rd Impression) , Life Skills For Engineers , Six Thinking Hats , Critical Thinking: What Is It And Why It Counts? , Thinking, Fast And Slow , Developing Management Skills , University Physics With Modern Physics, Young, H. D., & Freedman, R. A., Pearson, 2020. , Engineering Physics, Gaur, R. K., & Gupta, S. L.Dhanpat Rai, 2022 , Elements Of Properties Of Matter. Mathur, D. S., S Chand, 2010. , Introduction To Quantum Mechanics. Griffiths, D. J. Cambridge University Press, 2018 , Laser Fundamentals (2Nd Ed.).Silfvast, W. T.Cambridge University Press, 2008 , Elements Of Properties Of Matter. Mathur, D. S. S Chand, 2008 , Heat, Thermodynamics And Statistical Physics. Brij Lal, & Subramaniyan, N., S Chand, 2018 , Physical Metallurgy: Principles And Practice. Raghavan, V, Phi, 2009 , Materials Science And Engineering. Askeland, D.Brooks/Cole., 2010 , Modern Physics,R.Murugesan, S Chand, 2023 , Textbook Of Dynamics, Sigh, Kaushal Kumarphi,2011 , Quantum Mechanics, Sathay Prakash, 2016 , A Text Book Of Optics,Brij Lal, M N Avadhanulu & N Subrahmanyam, S Chand , 2012 , Calculus: Early Transcendentals, Anton, H., Bivens, I. C., & Davis, S.,Wiley, 2021 , Calculus: An Applied Approach,Ron Larson And David C. Falvo, Cengage, 2013 , Calculus,Stewart, J., Clegg, D., & Watson, S, Early Trans, 2019 , Thomas Calculus,Thomas, G. B., Jr., Weir, M. D., Hass, J., & Heil, C., Early Trans,2018 , Engineering Mathematics Through Applications.,Singh, K, Bloomsbury, 2019 , Higher Engineering Mathematics , Linear Algebra Friedberg, S. H., Insel, A. J., & Spence, L. E., Pearson, 2022 , Linear Algebra And Its Applications With Matlab, Lay, D. C., Lay, S. R., & Mcdonald, J. J., Pearson,2020 , Schaum’S Outline Of Matrix Operations, Bronson, R.Mcgraw Hill, 2011 , Linear Algebra And Its Applications, Strang, G., & Thomson, R., Brooks, 2005 , Schaums Outline Of Linear Algebra, Lipschutz, S., & Lipson, M.Mcgraw,2009 , Advanced Engineering Mathematics, Kreyszig, E. , Wilely, 2018 , Engineering Chemistry (17Th Ed),Jain,P.C., &Jain.M, Dhanbat Rai,2015 , A Text Book Of Engineering Chemistry, Dara,S.S, Chand, 2004 , Basics Of Nano Chemistry, Sachdeva,M.V., Anmol, 2011 , Engineering Chemistry ,Friedrich.Emedtech, 2014 , Engineering Chemistry,Palanna ,O.G,Mcgraw, Hill, 2009 , Emerging Materials For Energy Conversion And Storage,Cheong, K. Y., Impellizzeri, G., & Fraga, M. A. , Elsevier, 2018 , Composite Materials, Sharma, S. C, Naraso,2000 , Design And Manufacture Of Composite Structures, Eckold, G. , Woodhead,1994 , Fundamentals Of Analytical Chemistry.,Skoog, D. A., West, D. M., Holler, F. J., & Crouch, S. R.,Cengage, 2022 , Green Building Materials: A Guide To Product Selection And Specification,Spitzer, W. G., & Simonson, K. ,Wiley, 2011 , ????? ??????, ???????? ?????????,??.??. ??????,????????? ??????? ??????? ?????????? ?????? ????? , ????????????,?????????. ????????,?????? ???????? , ????? – ???? ???????????? ???? ??? ??? ????????,????????? ???? , ??????, ????????? ????????,????????? ???? , Social Life Of Tamils,Dr.K.K.Pillay,Tntb & Esc And Rmrl , Social Life Of The Tamils – The Classical Period, Dr.S.Singaravelu International Institute Of Tamil Studies , Historical Heritage Of The Tamils, Dr.S.V.Subaramanian, Dr.K.D. Thirunavukkarasu, International Institute Of Tamil Studies , The Contributions Of The Tamils To Indian Culture, Dr.M.Valarmathi, International Institute Of Tamil Studies , Keeladi – ‘Sangam City C Ivilization On The Banks Of River Vaigai’,Department Of Archaeology & Tamil Nadu Text Book And Educational Services Corporation, Tamil Nadu , Studies In The History Of India With Special Reference To Tamil Nadu,Dr.K.K.Pillay , Porunai Civilization,Department Of Archaeology & Tamil Nadu Text Book And Educational Services Corporation, Tamil Nadu , Journey Of Civilization Indus To Vaigai,R. Balakrishnan Rmrl
Contract Date: Mar 06, 2026 Contract Value : ₹ 10.20 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
26.
Agriculture #9567643 Technical Bid
Tender For Supply Of Tools/ Diagnostic Devices/ Workshop Equipments/ Spare Parts To Farm Machinery Clinic, Kollam. (Annual Plan 2025-26 - Support To Farm Mechanization) , Part 1-Hand Tools , Mechanic Tool Set Supplying A Comprehensive Professional-Grade The Mechanics Tool Kit With A Durable, Impact-Resistant Moulded Suitcase (Bmc Case) With Designated Compartments For Each Component, Ensuring Easy Portability And Organization And Includes The Chrome-Vanadium Tools And Accessories Listed As Appendix 1 1. 1/2 Drive Set A) Hexagonal Socket (19 Pcs) - Sizes: 8, To 32 Mm B) Star Socket (5 Pcs) - Sizes: E10, E12, E14, E16, E20 C) Flex Handle (1 Pc) - Length: 375 Mm D) Ratchet Wrench (1 Pc) - 1/2 Drive, 45 Teeth (Reversible) E) Extension Bars (2 Pcs) - Lengths: 75 Mm (3), 250 Mm (10) F) Universal Joint (1 Pc) - 1/2 Drive G) Three-Way Adaptor (1 Pc) - 1/2 Female × 3/8 Male H) Spark Plug Sockets (2 Pcs) - Sizes: 16 Mm And 21 Mm I) L-Handle (1 Pc) - 1/2 × 10 2. 3/8 Drive Set A) 12-Point Socket (15 Pcs) - Sizes: 6, To 22 Mm B) Ratchet Wrench (1 Pc) - 3/8 Drive, 45 Teeth (Reversible) C) Extension Bars (2 Pcs) - Lengths: 75 Mm (3), 150 Mm (6) D) Universal Joint (1 Pc) - 3/8 Drive 3. 1/4 Drive Set A) Screwdriver Bits (26 Pcs, 25 Mm Length, S2 Steel) B) Phillips (Ph): Ph0, Ph1, Ph2, Ph3 C) Pozidriv (Pz): Pz0, Pz1, Pz2, Pz3 D) Slotted (Sl): Sl4, Sl5.5, Sl7 E) Hex (H): H2, H3, H4, H5, H6, H7, H8, H10 F) Torx (T): T10h, T15h, T20h, T25h, T27h, T30h, T40h G) Bit Holder (1 Pc) - 1/4 Hex H) Hexagonal Sockets (9 Pcs) - Sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 Mm I) Star Sockets (5 Pcs) - Sizes: E4, E5, E6, E7, E8 J) Ratchet Wrench (1 Pc) - 1/4 Drive, 45 Teeth (Reversible) K) Extension Bars (3 Pcs) - Lengths: 50 Mm (2), 100 Mm (4), 150 Mm (6) L) Universal Joint (1 Pc) - 1/4 Drive M) Three-Way Adaptor (1 Pc) - 3/8 Female × 1/4 Male N) Spinner Handle (1 Pc) - 1/4 × 150 Mm O) Flexible Extension Bar (1 Pc) - 1/4 × 150 Mm 4. Combination Spanners (17 Pcs) - Sizes: 6, To 24 Mm 5. Flare Nut Spanners (5 Pcs) - Sizes: 8×10, 10×12, 11×13, 12×14, 17×19 Mm 6. Hex Key Set (10 Pcs) - Sizes: 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14 Mm 7. Machinist Hammer (1 Pc) - 300 G With Fiberglass Or Wooden Handle 8. Combination Pliers (1 Pc) - 7 9. Locking Pliers (1 Pc) - 10 Curved Jaw Lock Wrench 10. Slotted Screwdrivers (2 Pcs) - Sl6.5 × 100 Mm And Sl6.5 × 150 Mm 11. Phillips Screwdrivers (2 Pcs) - Ph2 × 100 Mm And Ph2 × 150 Mm 12. Stubby Screwdrivers (2 Pcs) - Ph2 × 38 Mm And Sl6.5 × 38 Mm All Sockets, Spanners, And Ratchets Shall Be Made From Chrome Vanadium Steel (Cr-V), Heat-Treated, And Chrome-Plated For Corrosion Resistance. Screwdriver Bits Shall Be Of S2 Alloy Steel For High Torque Resistance. Ratchets Shall Have A Minimum Of 45 Teeth With A Quick-Release And Reversible Mechanism. All Tools Shall Conform To Din / Iso Standards Or Equivalent. Suitcase Colour Should Be Standard Industrial Colour (Black / Blue / Grey Or Similar)- Preferably Tapariya Or Eastman , Tee Spanner Set Including Spanners Ranging From 8 Mm To 19 Mm Made From Chrome Vanadium Steel (Cr-V), Hardened And Tempered For Durability, The Handle Shall Be T-Shaped, Providing Maximum Torque And Grip And Surface Finish Shall Be Nickel-Chrome Plated For Corrosion Resistance.Preferably Tapariya Or Eastman , Deep Socket Set Consist Of Sockets From 8 Mm To 22 Mm, Made Of Chrome Vanadium Steel, Fully Hardened, Tempered, And Chrome-Plated, The Sockets Shall Have Six-Point Or Twelve-Point Configurations For High Torque Applications, Suitable For Use With Ratchet Handles And Extension Bars.Preferably Tapariya Or Eastman , Combination Plier 6 Manufactured From High-Grade Alloy Steel, With Precision Machined Jaws, Cutting Edges Induction-Hardened For Long Life. Handles Shall Be Double-Dipped With Insulated Grips For Comfort And Safety.Preferably Tapariya Or Eastman , Combination Plier 8 Manufactured From High-Grade Alloy Steel, With Precision Machined Jaws, Cutting Edges Induction-Hardened For Long Life. Handles Shall Be Double-Dipped With Insulated Grips For Comfort And Safety.Preferably Tapariya Or Eastman , Circlip Plier Internal 7 Made Of High-Grade Alloy Steel, With Spring-Loaded Return And Polished Tips For Easy Installation And Removal Of Internal Retaining Rings, Handle Grips Shall Be Pvc Or Rubber-Coated.Preferably Tapariya Or Eastman , Circlip Plier External 7 Made Of High-Grade Alloy Steel, With Spring-Loaded Return And Polished Tips For Easy Installation And Removal Of Internal Retaining Rings, Handle Grips Shall Be Pvc Or Rubber-Coated.Preferably Tapariya Or Eastman , Locking Plier (Vice Grip Type) 10 With Drop-Forged Steel Jaws With Heat-Treated Teeth For Firm Gripping, Include An Adjustable Screw And Quick-Release Lever, Nickel-Plated Surface For Corrosion Protection.Preferably Tapariya Or Eastman , Diagonal Cutting Pliers, 6, Made Of Forged Alloy Steel, With Induction-Hardened Cutting Edges And Insulated Handles Suitable For Cutting Wires And Small Metal Parts.Preferably Tapariya Or Eastman , Long Nose Plier 6 Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 6 Overall Length, With Insulated Handles.Preferably Tapariya Or Eastman , Long Nose Plier 8 Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 8 Overall Length, With Insulated Handles.Preferably Tapariya Or Eastman , Adjustable Pipe Wrench Suitable For Gripping Pipes Up To 40 Mm Diameter Made Of Cast Iron Body With Drop-Forged Steel Jaws, Serrated And Induction-Hardened And Handle Painted Or Powder-Coated.Preferably Tapariya Or Eastman , Adjustable Pipe Wrench Suitable For Gripping Pipes Up To 75 Mm Diameter Made Of Cast Iron Body With Drop-Forged Steel Jaws, Serrated And Induction-Hardened And Handle Painted Or Powder-Coated.Preferably Tapariya Or Eastman , Heavy-Duty Pipe Wrench With Jaw Opening Up To 110 Mm Made Of Forged Alloy Steel, Precision-Machined Teeth For Firm Grip, Designed For Mechanical And Plumbing Use.Preferably Tapariya Or Eastman , Heavy-Duty Filter Wrench With High-Tensile Rubber Or Nylon Strap And Steel Handle For Removing Large Oil/Fuel Filters, Handle Length: Minimum 300 Mm. Suitable For Heavy Machinery Maintenance.Preferably Tapariya Or Eastman , Medium-Duty Filter Wrench With Adjustable Steel Band And Handle, Suitable For Medium-Sized Oil Filters. Chrome-Plated Finish With Non-Slip Grip.Preferably Tapariya Or Eastman , Ball Pein Hammer With 300 Gm Forged Steel Head, Hardened And Tempered. Fitted With A Strong Fiberglass Handle Suitable For Riveting, Striking, And Metal Forming.Preferably Tapariya Or Eastman , Soft Face Hammer With Dual Rubber Striking Faces To Prevent Surface Damage. Head Weight Approx. 300-500 Gm, Handle Made Of Fiberglass Preferably Tapariya Or Eastman , Non-Marring Mallet Hammer With Rubber Or Plastic Head 40 Mm And Sturdy Handle. Head Weight Approx. 1 Kg. Suitable For Precision Fitting Without Metal Deformation.Preferably Tapariya Or Eastman , Sledge Hammer With 500 Gm (2 Lb) Drop-Forged Steel Head, Hardened And Tempered. Handle Of Strong Wooden Or Fiberglass Construction, Securely Fixed To Head.Preferably Tapariya Or Eastman , Cold Chisels Made Of Chrome Vanadium Or Carbon Steel (18 Mm Dia Approax) , Hardened And Tempered To 58-60 Hrc. Size 25 Mm, Length 300 Mm, Approax Weight 500 Gm Ground Cutting Edge With Anti-Slip Striking End.Preferably Tapariya Or Eastman , Steel Wedges, Hardened And Ground, Used For Splitting Or Aligning. Made Of Forged Alloy Steel With A Rust-Resistant Finish 230 Mm Length 1.5 Kg.Preferably Tapariya Or Eastman , Adjustable Torque Wrench With Working Range 25-135 Nm. Drive Size 3/8 Or 1/2, Accuracy ±4% Of Indicated Value With Reversible Ratchet And Quick-Release Mechanism.Preferably Tapariya Or Eastman , Heavy-Duty Adjustable Torque Wrench, Range 70-340 Nm. 1/2 Drive, Accuracy ±4%, Chrome Vanadium Construction With Calibration Certificate.Preferably Tapariya Or Eastman , High-Capacity Torque Wrench, Range 135-540 Nm. 3/4 Drive, Accuracy ±4%, Knurled Handle For Non-Slip Grip, Supplied With Protective Case And Calibration Certificate.Preferably Tapariya Or Eastman , Part 2- Description ( Measuring Tools ) , Steel Scale Set (5 Nos) Made Of High-Quality Tempered Stainless Steel With Etched And Permanently Engraved Graduations In Both Metric (Mm/Cm) And Inch Units. Straight, With Accurately Ground Edges And Smooth Surfaces, Graduation Accuracy Shall Conform To Is 1481:1970 Or Equivalent. Lengths : 150 Mm, 300 Mm, 600 Mm, 450 Mm, 1000 Mm. Each Scale Shall Have Clear Visibility Markings And Corrosion-Resistant Satin Chrome Finish.Preferably Mitutoyo Or Bosch , Vernier Calipers Made Of Stainless Steel, Precision-Ground And Finished, With A Measuring Range Of 0-200 Mm And Least Count 0.02 Mm / 0.001 Inch Capable Of Internal, External, Depth, And Step Measurements. Vernier Scale And Main Scale Markings Shall Be Clearly Etched For Long-Term Readability. The Instrument Shall Conform To Is 3651:1981 Or Din 862 Standards. A Locking Screw Shall Be Provided For Measurement Retention, And The Tool Shall Be Supplied In A Protective Case.Preferably Mitutoyo Or Bosch , Outside Micrometer (0-25 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate.Preferably Mitutoyo Or Bosch , Outside Micrometer (25-50 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate.Preferably Mitutoyo Or Bosch , Feeler Gauges Made Of Hardened And Tempered Spring Steel, Precision-Ground To Required Thickness, And Permanently Marked With Size Values. The Set Shall Include Multiple 75 Mm Long Blades Of 30 Different Thicknesses 0.03 Mm To 1.00 Mm Assembled In A Steel Holder With Pivot. Each Blade Shall Be Rust-Resistant And Polished For Smooth Operation. The Gauge Shall Conform To Is 3179:1982 Or Equivalent Standards.Preferably Mitutoyo Or Bosch , Wire Gauge (Standard Bs 1505 Type) Manufactured From Hardened And Tempered Steel With Precisely Cut Slots For Wire Sizes 1 To 36 Swg. The Gauge Shall Be Circular Or Rectangular In Shape With Permanent Engraved Markings. The Tool Shall Comply With Bs 3737 / Is 3177 Standards For Accuracy. Surface Shall Be Satin Chrome Or Nickel Plated To Resist Corrosion Suitable For Measuring Diameters Of Wires, Rods, And Drill Bits.Preferably Mitutoyo Or Bosch , Inside Calipers Shall Be Made Of Forged Steel Or Stainless Steel, Polished And Hardened. The Legs Shall Have Finely Ground Points With A Pivot Joint And Tension Adjustment For Smooth Movement. Measuring Range: 20-170 Mm Suitable For Measuring Internal Dimensions And Bore Diameters. Shall Conform To Is 3564:1985 Standards.Preferably Mitutoyo Or Bosch , Outside Calipers Made Of High-Grade Carbon Or Stainless Steel With Hardened Tips, Spring Joint, And Knurled Adjustment Nut For Precision. Shall Conform To Is 3564:1985 Or Equivalent Standards. Surface Finish: Polished Or Chrome-Plated. 12 Inch Size Preferably Mitutoyo Or Bosch , Centre Punch Manufactured As Per Is 7177 - 1999 Or Equivalent, Made Of High Carbon Or Alloy Tool Steel, Hardened And Tempered At The Striking End And Point. Length: Approximately 150 Mm, Approximate Weight 160 Gm With Point Angle Of 60° ± 2°. The Striking End Shall Be Chamfered To Prevent Mushrooming. Surface Finish Shall Be Black Oxide Or Polished. Suitable For Marking Centers On Metal Surfaces Before Drilling Operations.Preferably Mitutoyo Or Bosch , Portable Digital Non-Contact Tachometer Of Reputed Make, With A Non-Contact Measuring Range Of Approximately 10 To 99,999 Rpm And Accuracy Not Inferior To ±0.04% ±2 Digits. Equipped With A Digital Lcd Display, Data Hold, Counting Function, And Computer/Usb Interface For Data Transfer, A Working Distance Of Around 0.2 M With A ±30° Working Angle, Reflective Tape, Interface Cable, And Carrying Case. Conforming To Iec 61010-1 / Is 13875.Preferably Mitutoyo Or Bosch , Part 3- Description ( Auto Electrical And Pump) , Portable True-Rms Digital Multimeter Of High-Accuracy, Capable Of Measuring Ac/Dc Voltage Up To 1000 V, Ac/Dc Current Up To 10 A, Resistance, Capacitance, Frequency, Diode, And Continuity. The Meter Should Have Features Like Auto-Ranging, Data-Hold, Min/Max, And Relative Measurement Functions With A Large Back-Lit Display Of Minimum 4000 Counts Or Higher. The Instrument Shall Have Overload Protection, Fused Input Terminals, And Comply With Safety Category Cat Iii 1000 V Or Cat Iv 600 V As Per Iec 61010-1. The Unit Shall Be Housed In A Protective Insulated Casing Suitable For Field Use And Supplied Complete With Test Leads, Batteries, Protective Case, And Calibration Certificate.Preferably Continental Or Bosch , Handheld Clamp Meter (True-Rms Type) Designed For Measurement Of Ac And Dc Currents Up To 1000 A, With Additional Functions For Ac/Dc Voltage, Resistance, Frequency, And Continuity. The Jaw Opening Shall Accommodate Conductors Up To 40-60 Mm In Diameter. The Meter Shall Feature A Large Digital Display, Auto-Range Selection, Data-Hold And Peak Capture Functions, And Have An Accuracy Of ±2 % Or Better. It Shall Meet Cat Iii 1000 V / Cat Iv 600 V Safety Standards, Include Overload And Transient Protection, And Be Built In A Shock-Resistant Insulated Body. The Clamp Meter Shall Be Supplied With Test Leads, Carrying Pouch, And Calibration Certificate.Preferably Continental Or Bosch , Wire Strippers Suitable For Removing Insulation From Copper Conductors Ranging From 0.5 Mm² To 6 Mm² Preferably Continental Or Bosch , Ratchet-Type Crimping Tool Designed For Insulated And Non-Insulated Terminals 1.5 Mm² To 10 Mm², With Interchangeable Dies And Ergonomic Handles.Alloy Steel Duly Hardened & Tempered Preferably Continental Or Bosch , Heavy-Duty Mechanical Or Ratchet Type Cable Cutters Suitable For Cutting Copper And Aluminium Cables Up To 300 Mm² Preferably Continental Or Bosch , Soldering Iron Shall Be Of 40 W Capacity Insulated Handle. Cable Lugs And Ferrules Shall Be Of Tinned Copper, Crimp Type, Conforming To Din 46234/46235 Standards Preferably Continental Or Bosch , Infrared Thermometer (Ir Gun) Shall Measure From -50 °C To +550 °C With Laser Targeting And Digital Display. Should Have Rugged, Insulated Housings And Be Supplied With Charger, Carry Case, And Calibration Certificate.Preferably Continental Or Bosch , Battery Load Tester (12V) Shall Provide Controlled Load Up To 2-200 Ah To Assess Battery Condition By Measuring Voltage Drop And Internal Resistance Instruments Shall Have Clear Displays, Polarity Protection, Insulated Clamps, And Rugged Enclosures For Workshop Use.Preferably Continental Or Bosch , Smart Battery Charger Shall Provide Automatic Multi-Stage Charging For 12 V Batteries With Protections For Overcharge And Polarity Reversal.Preferably Continental Or Bosch , Part 4- Description ( Tractor & Auto Mobile) , Spring Compressor - Head Valve Type, Of Reputed Make Made Of High-Strength Carbon Steel With A Corrosion-Resistant Finish, Having An Overall Length Of Approximately 750 Mm And Weight Around 700 G Conforming To Relevant Standards For Hand Tools Such As Is 5781 / Is 6131 / Iso 6787 Or Equivalent. Preferably Tapariya Or Bosch , Piston Ring Compressor (Set Of 3) Of Reputed Make, Made Of Hardened And Tempered Alloy Or Carbon Steel With A Polished Or Chrome-Plated Corrosion-Resistant Finish, And Provided With A Ratchet Or Key-Type Locking Mechanism For Uniform Compression And Easy Releasewith An Adjustable Diameter Range Suitable For Standard Engine Pistons (50 Mm To 125 Mm With 75 Mm Height, 90 Mm To 175 Mm With 100 Mm Height, And 90 Mm To 175 Mm With 150 Mm Height), Conforming To Relevant Standards Such As Is 7347 / Iso 1174 To Be Supplied Complete With Necessary Tightening Wrench Or Handle.Preferably Tapariya Or Bosch , Portable Diesel Injector Nozzle Pop Tester, With A Dual-Scale Pressure Gauge (0-400 Bar / 0-6000 Psi), A Manual Hydraulic System With An Oil Cup Capacity Of 0.8 Litres, Constructed From High-Grade Plastic, And A Rugged Metallic Pump Body, Approximate Weight Of 4.25 Kg, Conforms To Iso 4113 (Calibration Fluid For Diesel Injection Equipment) And Iso 4008-1 / Iso 4008-2 (Diesel Fuel Injection Test Equipment - Testing Of Injection Pumps And Injectors).Preferably Tapariya Or Bosch , Injector Puller Set (8 Pcs), Including Eight Precision-Engineered Oxidized Carbon Steel Components Comprising An Inertia Hammer, A Joint For Accessing Hard-To-Reach Areas, And Six Threaded Adapters With Sizes M12×1.75, M17×1, And M27×1, Ensuring Compatibility With Injectors From Major Manufacturers, Hammer Length Of 350 Mm All Conforms To Iso 6789:2017 (Torque Tools - Requirements And Test Methods) And Din 3122 (Hand-Operated Tools For Mechanical Drive). , Mechanical Puller (3?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 3 Inch (76.2 Mm), With A Spread Of Approximately 76 Mm, Reach Of About 65 Mm, And Working Diameter Range From 15 Mm To 80 Mm, Threaded Spindle Length 125 Mm, Conforming To Is 6149 / Iso 2985 Standards. Preferably Tapariya Or Bosch , Mechanical Puller (8?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 8 Inch (203.2 Mm), With A Spread Of Approximately 203 Mm, Reach Of About 177 Mm, And Working Diameter Range From 30 Mm To 210 Mm, Threaded Spindle Length 174 Mm, Conforming To Is 6149 / Iso 2985 Standards.Preferably Tapariya Or Bosch , Valve Seat & Face Cutter Set Of Seat Cutters, Face Cutters, Arbors, And Pilots (20 Nos) Of High-Grade Alloy Steel With Precision-Ground Cutting Edges, Hardened And Tempered To Maintain Cutting Efficiency, Conforms To Is 5517:1993 (Specification For Cutting Tools - General Requirements) And Iso 513 (Classification And Application Of Cutting Tool Materials) Preferably Tapariya Or Bosch , T-Handle Spark Plug Socket Wrench (21 Mm) Carbon Steel With A Chrome-Plated Finish, With A 360-Degree Swivel Head For Flexible Operation, A Plastic Grip On The T-Handle, A Rubber Insert Within The Socket, An Approximate Weight Of 110 Grams, And Conforming To Relevant Standards For Hand Tools. Preferably Tapariya Or Bosch , 10Pcs Carburetor Adjusting Tool Kit Including: 21-Teeth Splined, 7-Teeth Splined, Single D, Small Head Single D, Double D, Pac Man, Small Head Pac Ma,N Hexagon Shaped, Six Star, And Carburetor Cleaning Tools All Made Of High-Quality Stainless Steel Wear Resistant And Long Lasting With Ergonomic Handle Comfortable To Grip And Stable To Use.Preferably Tapariya Or Bosch , The Heavy-Duty Spark Plug Cleaner And Tester Designed To Clean And Test Spark Plugs Under Simulated Engine Conditions, Operates On A 220 V Ac Supply And Incorporates A 12 V / 12 Kv Ignition Coil For Spark Generation And A 220 V / 12 V Electronic Vibrator For Cleaning Including A Pressurized Testing Chamber With A Working Pressure Of Up To 12 Kgf/Cm² And A Separate Abrasive Cleaning Chamber Equipped With A Double-Acting Valve For Blasting And Dust Removal, Should Be Compatible With Spark Plug Sizes M10, M12, M14, And M18 Through Interchangeable Rubber Adapters And Features A Pressure Regulator For Maintaining Safe And Consistent Operation. Product Should Conform To General Standards For Electrical Safety And Workshop Equipment, Such As Is 302 (Part 1): Safety Of Electrical Equipment, Is 10326: Automotive Service Equipment - Spark Plug Testers, Or Equivalent International Standards Preferably Tapariya Or Bosch , Portable Fuel And Vacuum Gauge Tester Kit For Testing Fuel Pump Pressure, Fuel Pump Vacuum, Carburettor Intake, And Manifold Vacuum Systems In Petrol Engines With Dual Gauges - A Pressure Gauge Ranging From 0 To 10 Psi (0-0.7 Kg/Cm²) And A Vacuum Gauge Ranging From 0 To 28 In-Hg (0-70 Cm-Hg) - For Accurate Measurement Of Engine Fuel And Air System Performance, With Standard Automotive Fittings For Quick Connection To Various Fuel And Vacuum Lines And Conforming To Is 1446: Automotive Test Equipment - Pressure And Vacuum Gauges Or Equivalent International Standards Like Sae J1812 For Fuel System Testing Instruments.Preferably Tapariya Or Bosch , Petrol Engine Compression Tester Kit (400 Mm) Including Threaded Adaptors In Sizes M10, M12, M14, And M18, Along With Two Rubber Cone Ends For Both Threaded And Non-Threaded Testing, Equipped With Straight And Angled Push-On Connectors And A 400 Mm Flexible Hose, To Diagnose Issues Related To Piston Rings, Valves, Or Head Gaskets, Suitable For Cars, Motorcycles, And Small Petrol Engines.Preferably Tapariya Or Bosch , Heavy-Duty Sprocket Chain Breaker And Splitter Tool Suitable For Breaking, Splitting, And Repairing Chains Of Size 420 To 530 Made Of High-Grade Carbon Steel Preferably Tapariya Or Bosch , Compact Chain Saw Grinder For Precise Grinding Of Chain Saw Blades For A Rated Voltage Of 220-230 V At 50/60 Hz, With An Input Power Of 300 W And A No-Load Speed Of 8400 Rpm, Equipped With A 100 Mm Grinding Wheel Suitable For Most Standard Chain Saw Chains, Weighing Around 2.5 Kg, Conforming To General Safety And Performance Standards Such As Is 302 (Part 2/Sec 201): Electrical Safety For Hand-Held Tools And Iec 60745-2-4 Preferably Tapariya Or Bosch , Soldering Station Operating On A 220-240 V Ac, 50/60 Hz Supply, Input Power Of 60 W, With A Preheat Time Of Approximately 1 Minute, Digital Temperature Display, Adjustable And Thermostatic Temperature Control Via A Rotary Knob, Built-In Ceramic Heating Element, A Straight Tip Head, A Durable Stand For Iron Placement, Packed In A Color Box, Conforms To Iec 60335-2-45: Household And Similar Electrical Appliances - Safety Of Portable Heating Tools And Iec 61340-5-1: Protection Of Electronic Devices .Preferably Tapariya Or Bosch , Compact, Durable, And Easy To Operate Portable High-Pressure Hand-Operated Portable Grease Pump With A 10 Kg Grease Capacity And Delivers A Material Output Of Approximately 3 Grams Per Stroke, Maximum Block Pressure Of 140 Kg/Cm², A 2-Meter High-Pressure Rubber Hose Fitted With End Connections.Preferably Tapariya Or Bosch , Double Piston Lever Grease Gun Delivering Up To 2.4 Grams Of Grease Per Stroke, Pressures Up To 6000 Psi, With A Double-Piston Mechanism, Compact And Lightweight (Approx. 2 Kg).Preferably Tapariya Or Bosch , Durable And Easy-To-Use Steel Lubrication Oil Dispenser Can For Smooth And Controlled Lubrication With A 500 Ml Capacity, Made From High-Quality Steel With A Powder-Coated Finish, The Can Is Lightweight (Approx. 200 G), Waterproof, And Ergonomically Designed For Comfortable Handling And Precise Oil Flow. Preferably Tapariya Or Bosch , Part 5- Power Tools & Equipments , Corded Type Electric Impact Wrench Conforming To Is 7151:1983 / Iec 60745-2-2 [Vibration (=11.5 M/S²), And Noise (104 Db(A))], With A Continuous Input Rating Of 400 W,. It Shall Provide A Maximum Fastening Torque Of 350 N·M, With A No-Load Speed Of 2000 Rpm And Impact Rate Of 2000 Blows Per Minute, 12.7 Mm (½) Square Drive, A 2.5 M Power Supply Cord. The Housing In Impact-Resistant Polymer With Reinforced Internal Metal Gear Casing, Suitable For Tightening And Loosening Ensuring Efficient Operation For Both Standard (M12-M22) And High-Strength Bolts (M12-M16) In Vehicle And Machinery Maintenance Applications Preferably Makita Or Bosch , Heavy-Duty Angle Grinder, Of Reputed Make, Single Phase 220-240 V, 50/60 Hz Ac Supply, Input Power 2200 W No-Load Speed 8500 Rpm To Use With 180 Mm (7) Diameter Abrasive Wheels, And Equipped With Side Handle, Wheel Guard, And Spindle Lock A 2.0 M Power Supply Cord And Conforming To Is 7554 / Iec 60745-2-3 / Iso 11148-7 Or Equivalent Standards (Low Vibration Level (=6.5 M/S²), Sound Pressure Level Not Exceeding 91 Db(A)). Preferably Makita Or Bosch , Electric Power Drill (Corded Type) Of Reputed Make, Single Phase 220-240 V, 50 Hz Ac Supply, 350 W And Variable Speed Range Up To 3000 Rpm (No Load). Including A Pistol-Grip Body, Keyed Or Keyless Chuck, And A 2.0 M Power Supply Cord Complying With Is 7554 / Iec 60745 / Iso 11148 Or Equivalent Standards, [Low Vibration (=3.0 M/S²) And Sound Pressure Level Below 80 Db(A)] Supplied Complete With Chuck Key, Side Handle (If Applicable), And Instruction Manual.Preferably Makita Or Bosch , Portable Electric Heat Gun Powered By An 1800 W Motor Operating At 230 V Ac, For Adjustable Airflow Between 350-550 L/Min And A Working Temperature Range Of 60°C To 550°C, Selectable In Three Stages (60/350/550°C), Achieves Full Heat-Up Within 1 Minute, With A Heat-Resistant Plastic Body And Heat Isolation Cap, Weighs 750 G And Features A 2 M Cord Length And Conforming To Iec 60335-2-45: Household And Similar Electrical Appliances - Safety Of Portable Heating Tools And Iec 61000-3-11/12: Electromagnetic Compatibility Standards. Preferably Makita Or Bosch , Portable Air Compressor, Of Reputed Make, Single Phase 230 V, 50 Hz Ac Supply, Fitted With An Electric Motor Of 2.0 Hp (1.5 Kw) A Maximum Working Pressure Of 8 Bar, Free Air Delivery Not Less Than 200 Lpm (7.2 Cfm), And A Motor Speed Of 2850 Rpm. Air Receiver Tank Of 50 Liters Capacity, Conforming To Is 5456 / Is 2825 Standards And The Compressor Shall Conform To Is 10437 / Iso 1217, And Fitted With Pressure Gauge, Safety Valve, Drain Valve, And Automatic Pressure Switch. The Complete Unit Shall Be Portable, Vibration-Damped, And Equipped With Wheels And Handle For Easy Movement. Preferably Makita Or Bosch , Single Phase Annual Rate Contract Welding Machine Of Reputed Make, With Inverter-Based Igbt Technology To Be Operated On Ac 220V ±15%, 50/60 Hz Single Phase Supply And Deliver A Welding Output Current Up To 400 Annual Periodical Maintenance With A Duty Cycle Of Not Less Than 60%, An Efficiency Of Minimum 80% And Power Factor Not Less Than 0.73, With Insulation Class F And Protection Grade Ip21 As Per Is 2879 / Is 3024 Or Equivalent International Standards. And Necessary Accessories Such As Welding Cable, Electrode Holder, And Earth Clamp Etc. Should Be Included.Preferably Makita Or Bosch , Bench Grinder, Of Reputed Make, Single Phase 220-240 V, 50 Hz Ac Supply Equipped With A 350 W Induction Motor Of 2950 Rpm. Two 200 Mm Diameter Grinding Wheels Each Provided With Eye Shields And Wheel Guards, Heavy-Duty Aluminum Base With Tool Rest, Tool Storage Box, And Safety Accessories Etc. Complete Conforming To Is 302 / Is 6932 / Iec 61029 Or Equivalent.Preferably Makita Or Bosch , Bench Drill Press, Of Reputed Make, Single Phase 120 V Ac, 50/60 Hz Fitted With Electric Motor Of Approximately 1/3 Hp Rating, Manually Adjustable Work Table With Depth Stop For Accurate Drilling. Chuck Guard, Power Switch With Overload Protection, And Belt Or Gear-Driven Spindle System Conforming To Applicable Safety And Performance Standards Such As Is 2425 / Iso 16089 / Iec 61029 Or Equivalent Supplied Complete With Drill Chuck, Key, And Instruction Manual.Preferably Makita Or Bosch , Part -6 Furniture And General , Bench Vice Of Heavy-Duty Engineers Type, Suitable For Fitting And General Workshop Applications With Jaw Width 125 Mm (5 Inches), With Replaceable Serrated Hardened Steel Jaws For A Firm Grip On Workpieces, The Body And Sliding Jaw Shall Be Made From High-Grade Cast Iron Or Forged Steel, Precision Machined To Ensure Smooth Operation And Alignment. The Vice Shall Be Equipped With A Large-Diameter Acme-Threaded Spindle And Steel Handle With Knurled Ends For Easy Tightening (1600 Kg Tightening Force) And Release. The Vice Includes A 360° Swivel Base With Locking Mechanism, Allowing Positioning And Adjustment As Required During Work. The Anvil Surface On The Rear Shall Be Machined And Hardened, Suitable For Light Hammering Operations. The Vice Shall Have A Clamping Capacity Of At Least 150 Mm, And All Moving Parts Shall Be Protected Against Rust And Corrosion By Paint Or Plating. The Bench Vice Should Be Suitable For Mounting On Heavy-Duty Wooden Or Steel Workbenches And Capable Of Withstanding Heavy Mechanical Use In Workshops And Maintenance Facilities. It Shall Conform To Is: 2586 (Specification For Bench Vices, Heavy Duty) Or Equivalent Standard.Preferably Goderej Or Dewalt , Heavy-Duty Roller Tool Cabinet With 4 Drawers And One Cupboard Suitable For Use In Mechanical, Workshops For Organized Storage Of Hand Tools, Instruments, And Accessories Made Of High-Quality Cold-Rolled Steel Sheet With A Cabinet Body Thickness Of 0.8-1.0 Mm And Drawer Sheet Thickness Of 0.7 Mm, With An Overall Size Of 765 Mm (L) × 465 Mm (W) × 812 Mm (H) And An Overall Height Of 976 Mm Including Casters. Drawers Of Size 536 Mm (L) × 410 Mm (W) × 74.5 Mm (H), Mounted On Precision Ball-Bearing Slides And The Top Panel Area Should Be Suitable For Tool Placement During Maintenance Work. The Unit Should Be Mounted On Four Heavy-Duty Casters Of Size 5? × 2?, Two Of Which Shall Be Swivel Casters With Locking Brakes For Easy Mobility And Stability During Use. The Cabinet Shall Include A Central Locking System For All Drawers, Should Be Surface-Treated With Powder Coating For Corrosion Resistance And A Smooth Finish. The Tool Cabinet Shall Conform, Where Applicable, To The General Guidelines Of Is 7155 (Industrial Trolleys And Cabinets) And Iso 9001:2015 Quality Manufacturing Standards. Preferably Goderej Or Dewalt , Oil Drain Pan Made Of High-Density Polyethylene (Hdpe) With A Capacity Of 16 Litres Including Integrated Handles, A Pouring Spout, And Anti-Spill Lips To Prevent Leakage During Draining Suitable For Chemical Resistance To Engine Oil, Transmission Fluids, And Coolants.Preferably Goderej Or Dewalt , Oil Drain Pan Made Of High-Density Polyethylene (Hdpe) With A Capacity Of 8 Litres Including Integrated Handles, A Pouring Spout, And Anti-Spill Lips To Prevent Leakage During Draining Suitable For Chemical Resistance To Engine Oil, Transmission Fluids, And Coolants.Preferably Goderej Or Dewalt , Rack For Batteries, Made Of Well-Seasoned Hardwood Or Marine Plywood With Sturdy Ms Frame Or Wooden Supports. Includes 3-4 Ventilated Shelves With Acid-Resistant Coating And Removable Rubber Or Pvc Mat. Designed To Hold Multiple Batteries Safely And Prevent Corrosion. Approx. Size: 1500 Mm × 1000 Mm × 450 Mm.Preferably Goderej Or Dewalt , Rack For Lubricants Constructed From Treated Wood Or Plywood Frame With Raised-Edge Shelves To Contain Spills. Each Shelf Shall Carry At Least 100 Kg And Be Coated With Oil-Resistant Paint. Suitable For 1-20 L Containers. Approx. Size: 1800 Mm × 1200 Mm × 450 Mm.Preferably Goderej Or Dewalt , Rack For Spares Fabricated From High-Quality Wood Or Plywood With Ms Reinforcement. Includes Adjustable Or Fixed Shelves (3-5 Tiers), Each Supporting Up To 150 Kg (Udl). Finished With Protective Paint Or Polish For Workshop Use. Approx. Size: 2000 Mm × 900 Mm × 450 Mm.Preferably Goderej Or Dewalt , Industrial Wet And Dry Type Vacuum Cleaner With A Power Rating Of 1500 W And Operating Voltage Of 220-240 V, 50 Hz, Suitable For Workshop And Service Bay Cleaning Applications With A Capacity Of 35 Litres, A Vacuum Suction Pressure Of 200 Mbar And An Airflow Rate Of 53 L/S, Ensuring High-Efficiency Dust And Liquid Removal. The Tank Should Be Made Of Corrosion-Resistant Stainless Steel (Minimum Ss 304 Grade) With Heavy-Duty Caster Wheels For Mobility. It Should Be Provided With A Flexible 5 M Power Cable, Washable Filters, Blower Function, And Accessories For Both Wet And Dry Operation. The Vacuum Cleaner Shall Conform To Iec 60335-2-69 (Safety For Wet And Dry Vacuum Cleaners For Commercial Use) Or Equivalent Indian Standard Is 11621:1986, And Include Overload And Thermal Protection Features For Motor Safety.Preferably Goderej Or Dewalt , Portable, Electric-Operated Industrial Pressure Washer Conforming To Iec 60335-2-79 / Is 8442 With A Power Rating Of 1700 W (230 V, 50 Hz Single-Phase Supply) And A Maximum Working Pressure Of 130 Bar And A Flow Rate Of 7 Litres Per Minute, With Self-Priming Capability Of 0.5 M, High-Pressure Foam Detergent System, 6 M Pvc Hose, Manual Hose Reel, 5 M Power Cable, 3-In-1 Nozzle And Ergonomic Handle Preferably Goderej Or Dewalt , Part 7-Safety Tools , Abc Powder Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4 Kg Suitable For Class A Fires. Dry Chemical Powder (Mono Ammonium Phosphate) Based, Stored Pressure Type With Working Pressure Of 15 Bar, Suitable For Electrical And Combustible Material Fires.Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label.Preferably Honeywell Or Karam , Co2 Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4.5 Kg Suitable For Class B Fires . Carbon Dioxide Gas Type With Seamless High-Pressure Steel Cylinder Conforming To Is 7285, Discharge Hose With Horn, And Designed For Electrical And Flammable Liquid Fires. Extinguisher Sould Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label.Preferably Honeywell Or Karam , Foam Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 9 L, Suitable For Class C Fires. Stored Pressure Or Cartridge Type Using Aqueous Film-Forming Foam Suitable For Flammable Liquid Fires. Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label.Preferably Honeywell Or Karam , Fire Blanket Shall Be Made Of 840 Gsm Glass Fiber Or Kevlar-Coated Woven Fabric, Resistant To Temperatures Up To 550°C, Conforming To Is 11871 / Bs En 1869, And Provided In A Quick-Release Wall-Mount Case. Standard Blanket Size: 2.00 M × 1.00 M For Personnel Protection And Small Fire Suppression.Preferably Honeywell Or Karam , First Aid Box Of Size 32.5(H) X 28.5(W) X 8(D) Cmshall Conform To Is 13154 (Part 1-3), Made Of Powder-Coated Metal, Gi Or Abs Plastic, Waterproof And Corrosion Resistant, To Keep All Essential Medical Supplies For Industrial Workshops (Bandages, Antiseptics, Gauze, Adhesive Strips, Scissors, Burn Cream, Splints, Sterile Pads, And Cpr Mask).Preferably Honeywell Or Karam , Eye Wash Station Wall Mount Type, Made Of Stainless Steel Push Plate 12.7 Mm (1/2 Inch Bsp) Inlet, 4810 Ss, Providing Continuous Flow At 1.5 L/Min Per Outlet, Operated By A Push Plate, Complying With Ansi Z358.1 / Is 10592.Preferably Honeywell Or Karam , Emergency Safety Shower Shall Deliver A Minimum Of 75 L/Min At Operating Pressure Of 2-6 Bar, With Pull-Rod Activation And Stay-Open Valve Ss Stay Open Ball Valve With Push Plate, Material Of Construction Gi And Abs Plastic. Preferably Honeywell Or Karam , Foldable Stretcher Shall Be Lightweight Aluminum Or High-Tensile Steel Frame With Washable Canvas Sheet, Capable Of Carrying 120 Kg Load, Fitted With Safety Straps And Rubber Handles, Conforming To Is 1904 / En 1865.Preferably Honeywell Or Karam , Ppe: Helmets Hdpe Or Abs Shell, Is 2925 Compliant, Chin Strap, Sweatband, Impact-Resistant Up To 50 Joules.Preferably Honeywell Or Karam , Ppe: Goggles Polycarbonate Lenses, Anti-Scratch And Uv-Resistant, Is 5983 / En 166 Compliant, Side Shields.Preferably Honeywell Or Karam , Ppe Industrial Gloves: For Mechanical Work-Leather Or Nitrile (Is 6994); For Chemical Work-Pvc/Neoprene (En 374); For Electrical Insulation-Rubber Class 0 (Is 4770).Preferably Honeywell Or Karam , Ppe: Safety Boots Confirming To Is 15298 / En 20345 Compliant, Steel/Composite Toe Cap (200 J Impact), Oil- And Slip-Resistant Sole, Steel Mid Sole Antistatic.Preferably Honeywell Or Karam , Ppe: Protective Overalls With 100% Cotton 210 Gsm Or Fire-Retardant Fabric, Full-Sleeve, High-Visibility Reflective Tapes Per Is 15748 / En 20471.Preferably Honeywell Or Karam , Electrical Insulated Gloves Conforming To Is 4770 / Iec 60903, Suitable For Class 0 (1000 V Ac / 1500 V Dc) Electrical Protection, Made Of High-Dielectric Natural Rubber, Seamless, And Rolled Cuff Type. Each Glove Shall Undergo Routine Dielectric Test At 5 Kv For 1 Minute With No Puncture Or Flashover. The Gloves Shall Be Category Rc (Resistant To Acid, Oil, Ozone, And Low Temperature) And Provided With A Cotton Inner Liner And Storage Pouch. Supplied With Test Certificate Indicating Batch Number, Test Voltage, And Date.Preferably Honeywell Or Karam , Welding Face Shield Suitable For Full-Face Protection During Welding, Grinding, And Metal Fabrication Works With A Shield Size Of Approximately 9 X 12, Made Of Durable Polypropylene Providing High Impact, Heat, And Corrosion Resistance. The Face Shield Shall Include An Adjustable Ratchet-Type Headgear With Multiple Adjustment Positions To Ensure A Secure And Comfortable Fit For Prolonged Use. The Approximate Weight Shall Be 1.5 Kg Or Less, And The Product Shall Be Supplied As One Complete Unit. The Face Shield Should Conform To General Industrial Safety Standards Suitable For Use In Workshops.Preferably Honeywell Or Karam , Industrial-Grade Welding Gloves Suitable For Providing Protection, Comfort, And Dexterity During Welding, Cutting, And Metal Fabrication Operations, Made From Premium Split Leather (Cowhide Or Goatskin) With A Minimum Thickness Of 1.2 Mm, Offering High Resistance To Heat, Sparks, And Mechanical Abrasion. The Inner Lining Shall Be Made Of Soft Flame-Retardant Cotton Or Fleece, Providing Insulation Against Heat And Comfort For Prolonged Use. Each Glove Shall Have Reinforced Palm And Finger Patches For Added Durability And Better Grip While Handling Tools And Hot Metal Objects. The Gloves Should Be Stitched With Heat-Resistant Thread To Prevent Seam Failure During Exposure To High Temperatures. The Length Shall Not Be Less Than 14 Inches (350 Mm), Ensuring Full Hand And Wrist Protection, With Extended Cuffs To Safeguard The Lower Forearm Against Welding Spatter And Radiant Heat. The Gloves Should Be Conformed To En 388 (Mechanical Risks) And En 407 (Thermal Hazards) Or Equivalent Indian Standards (Is 6153). They Shall Be Suitable For Mig, Tig, Arc, And Gas Welding Operations. Should Be Heat And Flame-Resistant, Puncture And Tear-Resistant, And Designed For Repeated Use In Demanding Industrial Environments. The Pair Shall Be Supplied In Standard Size (Large/Universal Fit) And Shall Bear Proper Labeling Indicating Brand, Size, And Conformity To Relevant Standards.Preferably Honeywell Or Karam , Part 8 -Lifting And Hoisting , Heavy-Duty, Low-Profile Type Hydraulic Trolley Jack Suitable For Lifting Vehicles Or Machinery Up To A Rated Capacity Of 3 Tons. The Jack Shall Be Constructed From High-Grade Steel With Welded Frame For Superior Strength And Stability, A Lifting Range From Approximately 130 Mm To 465 Mm, Operated Through A Hydraulic Lifting Mechanism Actuated By A Detachable Pump Handle. Should Be Equipped With A Safety Overload Valve To Prevent Lifting Beyond Rated Capacity, And Precision Hydraulic Seals To Prevent Oil Leakage. The Unit Shall Feature A 360° Swivel Rear Caster And Wide Front Wheels For Easy Maneuverability. The Saddle Shall Be Grooved Or Rubber-Coated For Secure Load Contact. The Jack Shall Conform To Is 7620 / Asme-Pase Or Equivalent Standards, And Shall Be Finished With Corrosion-Resistant Powder Coating. Supplied Complete With Hydraulic Oil Filled And Ready For Use.Preferably Ravaglioli Or Atselgi , Floor-Mounted Electro-Hydraulic Two Post Lift Of 4,000 Kg Capacity With Symmetric Lifting Arms (Front And Rear Adjustable) And Double Hydraulic Cylinders, Made Of High-Strength Steel Columns With A Minimum Inside Column Clearance Of Approximately 2799 Mm And A Bay Width Of About 3419 Mm, Operates On Single-Phase Or Three-Phase Power Supply, 50 Hz Frequency, Power Rating Of Approximately 3.0 Hp. Full Height Achieved In Less Than 45 Seconds, With An Overall Height Around 2844 Mm Including Automatic Arm Locks, Mechanical Safety Latches, And Overload Protection Etc. All Conforming To Is/Iso 13849 Standards.Preferably Ravaglioli Or Atselgi , Industrial-Grade, Floor-Operated Type Hydraulic Trolley Jack Suitable For Lifting Heavy Vehicles, Machinery, Or Agricultural Equipment Up To A Maximum Capacity Of 10 Tons. The Construction Shall Be Of Robust, All-Steel Design With Reinforced Chassis And Welded Seams For Durability. It Shall Have A Lifting Range From Approximately 150 Mm To 500 Mm, Operated By A Long Detachable Handle Providing Sufficient Leverage For Smooth Lifting. The Hydraulic System Shall Incorporate A Safety Overload Bypass System, Precision Machined Piston And Pump For Consistent Performance, And A Reliable Lowering Control Valve For Controlled Descent. The Jack Shall Be Equipped With Steel Swivel Casters, Wide Stance For Stability, And A Saddle Plate With Anti-Slip Surface. The Surface Finish Shall Be Rust-Resistant Enamel Or Powder Coating. The Unit Shall Comply With Relevant Is/Ansi/Ce Safety Standards, Factory-Tested For Rated Load, And Supplied Ready For Workshop Service.Preferably Ravaglioli Or Atselgi
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Kerala View Result →
Punjab View Result →
28.
Defence #9545191 AOC
Tender For Provision Of Solar Power Plant At Sevoke Mil Station Under Ge Sevoke Road.; 2 Design, procurement, erection, installation, testing and commisioning including connecting to local utility grid; Grid connected solar photovoltaic plant 0.8 MW output peak capacity with net billing arrangement including Solar Photovoltaic Modules,DC Cabling, Module Mounting Structures (suitable for ground mountingwith and including Soil Investigation as per OEM recommendation, RCC foundation framed structure and other connected civil work duly vetted by IIT / NIT), Array Combining Boxes, ACDB, DCDB, Lightining Protection of SPV modules and other accessories, String Inverter as Power Conditioning Unit, Weather Station and Data Monitoring system (SCADA) all as per detailed specifications given in tender documents, latest MNRE/SECI/NISE/IREDA guidelines and directions, meeting the Make in India (DCR), consisting of all requisite accessories (BOS-Balance of system) and including the following main components (NOTE : The work shall be executed directly by OEM only through contractor.) Item Continued as 1.01 to 1.45 3 (A) Photo Voltaic Module: Mono-crystalline Silicon Bifacial Solar Photovoltaic Modules of minimum 550 Wp(module power and number of modules to be selected according to available area), having cell efficiency more than 20% under standard conditions, form fill factor more than 0.76, plant performance ratio > 75%, made of high transmitivity glass front surface and it shall give high encapsulation gain (transmittance above 90% and bending less than 0.3%). The modules shall have the following features :(a) The electrical parameters of SPV modules under standard test condition of irradiance 1000W/sqm, AM 1.5 Spectrum and temp 25 degree Celsius shall be as under : (i) Max Peak Power Pmax : 550 Wp or more (ii) Voltage at Max Power : > 40 V (iii) Current at Pmax :> 10A 4 (iv) Short Circuit Current :> 12A (v) Open Circuit Voltage :> 47 V (vi) Module Efficiency : > 20%(b) Rated output of the modules shall have positive tolerance of 3-5% and no negative tolerance is allowed.(c) It shall perform satisfactorily in RH 85% with temperature up to +85 degree C and should withstand wind of 200 kmph on the surface of panel.(d) PV modules shall be warranted for their output peak watt capacity, and it shall not fall of its initialvalue below 90% in first 10 year end and 80% after the end of 25 years.(e) Each module shall have RFID tag encapsulated with solar cell bearing following details (i) Name of Manufacturer of SPV Module (ii) Name of Manufacturer of Solar Cell 5 (iii) Month and year of Manufacturing (separately for cell and module) (iv) Country of Origin (both cell and module) (v) Peak wattage, Im, Vm and fill factor of the module (vi) Date of year of obtaining IEC PV module qualification certificate including the test lab issuing IEC certificate. (vii) Unique serial no of model no of module (viii) IV curve of module(ix) Other relevant information on traceability of solar cells & modules(f) The temperature coefficient of power for the module shall not be more than 0.50% per degree Celsius.(g) The module must have bypass diode of suitable capacity.(h) PV module must confirm to latest edition of IEC 61215/ IS 14286. In addition the modules must confirm to IEC 61730 Part I and II for construction and testing & safety qualifications and confirming to IEC 62804 PID.(j) It shall also be in conformity to latest minimum technical specification issued by MNRE/IREDA/SECI/NISE/ALMM from time to time. Modules should be of MNRE/IREDA/SECI/NISE/ALMM approved companies and as per latest IEC/IS standards. 6 (k) RFID reader is to be provided by contractor(l) Both PV cells and SPV modules shall be made in India (DCR).(m) Each structure should have angle of inclination as per the site conditions to generate maximum power. However, to accommodate more capacity the angle inclination may be reduced to 10 - 13 Degree until the plant meets the specified performance ratio requirements.(n) Fire Points with Fire extinguisher liquefied CO2 gas of capacity 10 kg and adequate qty confirming to relevant IS or ISI mark complete as recommended by manufacturer deemed to be included in the unit rate quoted.(o) Danger Board and Rubber mat as recommended by manufacturer deemed to be included in the unit rate quoted.(p) S&F Pressure Booster pump electrically operated with minimum 3 HP 02 Nos (Running+ standby) three Phase AC Supply motor and having head not less than 20 mtr, including PCC foundation civil wokrs and necessary cable required for connection in drawn in PVC conduit heavy duty/ DWC/Electrode pipe from existing nearest point to the motor starter panel including motor starter suitable capacity,PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 63 mm/50 mm/32 mm/25 mm inner dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brass threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches with necessary exavation, removing and returning filling work and including all accessories from the new PVC tank cap 10000 Ltrs install at proposed site for cleaning of entire solar power plant system.(q) SPV Panel is to be fixed in such a way that lower portion of the Panel remains atleast above 1.5 mtr of finished reflecting surface and cost deemed to be included in the quoted rates. 7 (B) Junction Boxes: Junction boxes of suitable Nos (as per design)/OEM recommendations inputs and suitably rated out put having separate DCfuses for both (+)&(-) on input and isolator on output terminal for each string.Each junction box must have as pare input terminal.The junction boxes shall be dust and vermin proof and water proof made of FRP/ Thermo Plast with IP 65 protection in compliance with IEC 62208 and shall be UV resistant, fire retardant. It shall have surge protection and maintenance free earthing as per relevant standard. The junction box shall have suitable arrangement of the following: (a) The strings are required to be connected to the copper bus bar through individual fuses. (b) Provide arrangement for disconnection (DC dis-connection switch) for each SJB/ SCB. (c) To provide a test point for each sub group for quick fault location and to provide group array isolation. (d) Each array box shall be of relevant IEC standard. (e) Each array junction box shall have suitable bypass & reverse blocking diodes for minimum DC blocking voltage of 1000V with suitable arrangement of its connection. Reverse blocking and bypass diodes shall work for extreme temperatures and shall have efficiency of 99.98% confirmed by appropriate IEC standard. 8 (C) DC Cables: Suitable size of XLPE insulated tinned Copper cable (min 10 sqmm) of solar grade, 1100 Volts and UV resistant for outdoor installations confirming to IEC : 60227/15694 & 60502/ IS : 1554 (Pt I&II)) and shall be as under : (a) All cables and connectors must be as per IS/IEC standards and shall be able to withstand harsh environmental conditions including high temperature, UV radiations, rain, dirt, burial and attack by moss and microbes for 25 years and voltage as per latest IEC/IS. (b) All the cables / wires shall be provided with UV resistant printed ferrules for DC wires. (c) The size of the cable shall be such that average voltage drop at full power from PV module to inverter shall be less than 1.5%. (d) Cable batch No., Drum No, IS code and size and make shall be mentioned on every one meter or as per OEM practice. (e) The wiring of the module interconnection shall be in UPVC/HDPE pipe of suitable size. (f) The cost of interconnecting DC Copper cable, MS cable trays, MS cable trays suitable to accommodate Solar grade cables from SPV module to inverter are included in the item. 9 (g) Boring of holes under road, pavement, hard standing by trenchless technology (HDD) GI protection pipe up to 100 mm bore (dia), maximum 2.5 metre below of apron areain ant type of soilcomplete.Note : (i) All the precaution to be taken by the contractor before drilling the bore. The contractor has to take plan of existing cables any type and pipe line in existing area before drilling the bore. (ii) Any damage to existing cables any type and pipe line in the way of drilling the bore will be repaired and make good by the contractor within 24 hours. No extra cost will be paid in this account. (iii) Contractor has to get the survey of route, length and depth for boring before quoting the rate. (iv) Connected items like HDPE/PPR/DWCPE pipes, exavation, removing, return filing, channel, any type of metal work is not measured and paid separately under relevant items.(D) Module Mounting Structure (MMS) (Suitable for ground mounting on any type of soil condition) :Design, procure, fixing, support structure made of hot dipped galvanised steel with min 85 micron thickness including necessary PCC / RCC foundation and associated work (cutting, grounding, PCC filling, disposing waste material,etc., complete) and fixing mounting arrangement suitable for SPV modules so as it can with stand wind speed of 170 km per hour & minimum yield strength off 250 MPa. The mounting structure is to be installed on ground. Mounting structures to be so designed that maximum load is directly on ground. It shall also observe minimum space without sacrificing the out put of SPV panels & adequate spacing between the arrays shall be available for easy cleaning and maintenance. Nuts, bolts, protected from the atmosphere and weather mounting structure shall have to be adequately of Stainless Steel of grade SS316. 10 NOTES :- (a) Two numbers of anti theft fasteners of Stainless Steel on two diagonally opposite corners of each module shall be provided. (b) Module mounting structure shall be fitted to provide maximum generation. (c) MMS design shall be supported with Staddpro Report vetted by Third Party (Gov Institute) and submitted for the approval of the Accepting Officer. (d) The height of approved design MMS for solar power plant shall be as per latest MNRE/IREDA/SECI/ NISE guidelines. (e)Minimum grade of RCC M-25, design mix (using 20mm graded crushed stone aggregate includingTMT bar as per design, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and other connected works as per design and OEM recommendation. Civil work shall be designed through approved consultant of MES as per latest MNRE/IREDA/SECI/ NISE guidelines and vetted by IIT / NIT.(E) Lightning Protection forentire Solar Power Plant (i.e PV Array, Inverter etc) : Design, procure and fix lighting arrestor system confirming toIS/ IEC-62305(Part1-4)on the ground. The air terminal shall be fixed at the top of MS pole with base so as to beat least two meter above the pole to be protected. Its height above 9 mtr level shall be depend upon the level of protection and protection radii required. 11 NOTES :-(i) The cost of all equipments, MS Pole, Copper strip upto earth test point,LA, etc., shall be deemed to be included in this item. (ii) The cost of sufficient earthing for lightning protection is also included in this item to be provided by Engr-in-charge. and no extra payment will be made to the contractor on this account (iii) The complete system shall include chemical earthing (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes and for LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines.No separate cost of the same is included in the schedule and amount will be paid to the contractor on this account. In case of any dispute, decision of Engr in charge will be final, conclusive and binding to contractor. (The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474). Earth resistance shall not be more than 3 Ohms. (iv)Separate LA arrangement & the design document of the same shall also be submitted. (v) The protection against induced high voltage shall be provided by the use of metal oxide varistors and suitable earthing such that induced transient find and alternate route to earth. (vI) SPV Power Plant shall be provided with lightening and over voltage protection. (vii) Internal surge protection shall consist of three MOV type surge-arrestors connected from +ve abd +ve terminals to earth (via Y arrangement) 12 (F)Power Conditioning Unit: Procure, fixing, testing and commissioning of minimum 4 (Four) unitswith overall not less than 800 KW output on 11 KV AC supply, Solar-power inverter suitable for without DC power of Solar PV module/ array with AC output further feeding to grid confirming to IEC:61683 for efficiency, IEC:62109-1 or equivalent for safety and IEC:62093 for reliability. The input DC & output AC technical specification of Inverter are as under :Input (DC) (a) Max Absolute DC input Voltage : 1000 V (b) Start-up DC input voltage : 200 - 500 V (Default 420V) (c) Operating input DC voltage range : 200 - 1000 V (d) No of independent MPPT : One (e) MPPT input DC voltage range at Pacr : 180 - 1000 V DC (f) Max input DC Current : As per design. (g) AC grid connection type : 3Phase (4W + PE) (h) AC output power : As per design. (j) Max AC output Apperant power : As per design. (k) Max AC output Current : As per design. (l) Max AC fault current : As per design. 13 (m) Nominal Output Voltage : 800 Volts AC 3phase or as per the design of Solar Stepup Transformer (n) Output voltage range :± 10% (o) Output Frequency : 50 Hz ± 3Hz (p) Power factor : > 0.99 (q) Harmonic Distortion Current : < 3% (r) Efficiency : > 98% (s) Standby operation consumption : < 1.5 W(t) Operating temperature upto 85 degree centigrade (u) The Copper based inverter shall have minimum IP-67 protection, ground fault monitoring, reverse polarity protection, anti-islanding, DC reverse polarity, AC and DC short circuit current and over current, AC and DC over voltage and over temperature. 14 (v) The inverter shall adjust voltage and frequency levels to suit the grid. (w) The inverter shall be self commulated with Pulse Width Modulation (PWM) technology and shall be capable of synchronise maximum with in one min. (x) Maximum Power Point Tracker (MPPT) confirming to IEC 62093 shall be integrated in the inverter to maximise the energy drawn from the PV array (y) Monolithic design of inverter is not permitted. (z) Shall have anti-Islanding features. (aa) The inverter shall have suitble nos of protected inputs (asper design) and outgoing shall be protected by ACB/MCCB. (ab) The inverter should have MODBUS, PROFIBUS, ETHERNET common ports. (ac)The inverte rshall include appropriate self protection and self diagnostic features to protect itself and the PV array fromthedamageintheeventof invertercomponent failureor fromparametersbeyondtheinverterssafeoperatingduetointernaland/orexternalcauses. Invertershallhaveprotectionarrangementagainst ground leakage faults, over voltage, (SPD) & over current. Inverter shall have arrangement for adjustment for adjusting DC input current and shall trip against sustainable fault down stream and shall not restart till fault is rectified. (ad) The inverter should have provisions of Galvanic isolation, anti-islanding protection (IEEE 1547/UL 1741) equivalent IS and lightening. (ae) PCU must have the feature to work in tandem with other similar PCUs and be able to be successively switched ON and OFF automatically based on solar radiation variations during the day. (af) Minimum Warranty of Inverter- 12(Twelve) Years and defect liability period deemed to amended accordingly for the said item. 15 (G)ACDB : Outdoor type powder coated weather proof,vermin proof made out of CRCA sheet front open able door, lockingarrangement, including suitable working space in DCDB busbar chamber, cable box chamber including Copper busbar of designed capacity /bus raisers suitable capacities with PVC sleeves/tape RYB colour for phases identification, including all bus raiser shall be extend upto cable box chamber fixed on fibre insulation for RYB & neutral to all out going cable, confirming to IP-65 and fixed on wall / floor with control wiring with comprising cable gland brass, copper lugs etc. and comprising the following as per design :- (i) MCCB 4Pmicroprocessor based for outgoing (ii) MCCB 4Pmicroprocessor based for incoming (iii) AC type 2 Surge Protection Device (iv) Spreader Terminals as per requirement (v) Multifunction meter (vi) CT of suitable ratio(vii) Copper busbar chamber (ix) The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 16 (H) DCDB:- Outdoor type powder coated, weather proof, dust proof,vermin proof made out in CRCA sheet front open able door, looking arrangement, including suitable working space in DCDB busbar chamber,cable box chamber including copper bus raisers with PVC sleeves/ tape RYB coloursfor phase identification, including all bus raiser shall be extend upto cable box chamber, confirming to IP-65 and fixed on wall /floor with contral wiring with comprising cable gland brass, copper lugs etc. (i) MCCB as per requirement (ii) Fuse as per requirement (iii) Copper busbar chamber. (I) Weather Monitoring System Pyranometer : The pyranometer (ISO 9060 classification ) alongwith necessary assessories for measuring incidental solar radiation at horizontal and inclined plane of array. Specifications of the pyranometer shall be as follows :- (i) Spectral response : 031 to 2.8 micron,(ii) Time response (95%). Max 15 second 17 (iii)Nonlinearity + 0.5% (iv) Temperature response : - 2%(v) Tilt error <+/- 0.5% (vi)Zero offset themal radiation +7W/Sqm (vii) Zero offset temperature change + 2 W/Sqm(viii) Operating temperature range - O °C to 80°C(ix) Non stabillity Maximum - 0.8%,(x) Resolution minimum +/-1 W/Sqm (xi)Output Analog 4.50mA (xii) Digital RS 485(xiii) The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 18 (J)Balance of System(BOS) Items/ Components:TheBOSitems/componentsof theSPVpowerplants/systems deployed under this project shall conform to the latest edition with certificate of IEC or equivalent BIS Standards/MNRE specifications/ as specified in Para 1.01 of Minimal Technical Requirements/ Standards for SPV System/Plants to be deployed during this financial year under the programmes of MNRE available on MNRE website as on last date of quoting of tender. Notes:(i) The contractor must visit the site before quoting the rates for this item to assess the site condition so as to decide up on location and layout of SPV, placement of inverter, length of DC cables, lightning arresters, etc., complete. (ii) The contractor shall submit complete scheme including electrical diagram of the work, schematic diagram, SPV module layout, placement of LAs, Civil work, etc., complete as per IREDA/ SECI/NISE/MNRE/ALMM latest guidelines as applicable, Relevant IEC/IS norms to the GE for approval with in one month of date of commencement of the work. (iii) The rate quoted is deemed to be inclusive of the all protection system including surge, lightning arresters and necessary earthing all as specified and directed. 19 (K) Remote monitoring system (SCADA) for solar power plant complete with all electronic andelectricial partswith andincluding all necessary software and hardware etc to make fully functional connected to LED monitor (55 inches) with complete plant parameters as required and operate the system from remote and Other Accessories includingandThe system will be controlled from the main control room where all the data from different parts of the plant shallbe received, analyzed and action taken either manually or on auto as per the system design by OEM . The SCADA shallhave remote monitoring capability comprising with the following Items and with and including all connectedaccessories as per OEM recommendation complete:(a) Main SCADA control wall mounting panel complete with fixing arragnment like nut bolt, washers suitable size and connected items. (b) LED Moniter (55. inches) with mouse, key board, CPU (Minimum 1 TB storage alongwith 12 GB RAM, i7 processor), key pad and single phaseUPS 10 KVA with 12 Volt battery, 14400 Ah battery bank with rack and required battery backup should not be less than 4 Hrs inside control room.(c)“SCADA System shall be audited for Cyber Security by CERT certified firms at the time of commissioning. Subsequent cyber security audit shall be carried out after every 03 years and cost of audit and rectification shall be born by the contractor” 20 The Contractor shall provide following defined user access levels, unless otherwise instructed by the Engineer-in-Charge: -• Normal viewing only (default level) The default level shallpermit users to view al displays except those specifically assigned to a higher level of access.• Dally Access The daily access level shall allow viewing (ie default an printing at trend displays.• Operator Level (Remote Control) The operator level shall permit authorised users to access lower levels a and to carry out the following actions:- Perform control actions Acknowledge alarmsEnter or modify manually-entered data for inclusion in thereports.• Monthly and Yearly Data Archiving The level shall permit authorised users to access lower levels and shall provide the facility to download specific data to long ten data storage for archive purposes(d)The SCADA software shall be of a proven design and reliable, and conforming to industrial standards and shall: -• Support multiple makes of RTU/ Microprocessor controller/ transmitters and models and provide required software features needed to easily adapt a device whichshall not be supported as standard to the SCADA system. 21 • RTU/ PLC/ Microprocessor base controllers and transmitters shall have an expandable architecture and scalability to provide future capacity increases in SCADA system as well as meet present needs of the administration, provide multi-level security and password mechanisms to prevent use of the system by unauthorised persons. The access privilege of authorised users shall be defined separately and permission shall be provided to the users only to access areas concerning them, provide an on-line operatingenvironment.• Adding a new RTUI Microprocessor based Controller to the SCADA system or changing configuration of the existing RTUs/ Microprocessor based controller shall not result in stopping or hinder working order of SCADA system.• The Contractor shall specify maximum number of data which shall be achieved by the system without any performance loss. The Contractor shall conduct necessary tests to prove maximum number of data points achieved. The Contractor shall also be responsible to create additional data points necessary for conducting such tests. Any AutoCAD graphics shall be able to be converted to process diagrams and shall be re-loaded and operated after completion of all works and during tests.(e)The Contractor shall hand over to MES the SCADA and application software (as CDs or DVDs) necessary for re-loading software to the system in case of failures The CDs or DVDs shall be provided after making the necessary tests. The operating system ofrouters and work stations shall be of an architecture that provides a multi-tasking operating environment, and SCADA software shall also be multi-tasking. Therefore multiple tasks such as receiving measurement results from devices, displaying these results on computer screen. storing on a computer disk, sensing alarm conditions that may occur based on measurement results, and displaying them to users, generating reports from collected data, and printing them cut, transferring issued commands to Microprocessor controllers/ RTUs/ PLC, that SCADA software is supposed to execute shall be handled simultaneously without one task waiting for another. 22 To configureSCADA software or to change the system configuration, definitions shall be either defined directly by using a keyboard or another interactive tool or mechanisms that allow importing of configuration definitions from a text file created with a text editor. The database configuration shall be provided by means of an interactive program that contains menus or similar approaches and shall be easy to use The database configuration definition program, when required, shall be capable of extracting definitions related to the configuration from information created in text format to use as definitions for configuration The following shall be possible online without interruption or hindering of usual operations: -•Adding an RTU to the SCADA system.•Deleting an RTU from the SCADA system•Changing configuration information related to an existing RTU definition.•Modifying definitions in database containing information about measurement and control points.•Creating screen pictures which offer operators to monitor and control the SCADA system.•Similar configuration changes. 23 (f)SCADA software shall be upgradeable to new versions with an automatic mechanism to be provided by the Contractor. The old version of software shall be overwritten by new version without resulting in a change in any of the definitions created in previous version, nor disturbing the operational logic defined in previous version. Al! text being available on the screen shall be in English language The database shall be configured on-line when the SCADA system shall be in operation. The changes on existing definitions or new definitions related to database shall be made when the data collection n and control functions are being performed. The SCADA Software shall be operated using the database that shall be resident in the memory(g)Data Exchange The control system shall provide a method of real-time data exchange with different application programs like Geo Information System (GIS). relational database, third party spreadsheet packages, report generation and graphical simulation packages.(h) Historical Data Management An historical data management (HDM) system shall be provided for archive, storage and retrieval of operational data comprising field input data, manually-entered data and calculated points Archived historical data shall minimally include averages, minima and maxima for each analogue value compiled over hourly. daily and monthly time periods, with a minimum capacity of 1o00 points. The HDM system shall be capable of selectively increasing the rate of data capture based on events, such as process variable status, discrete inputs, or operator command. Minimum and-maximum data shall include the time and date of occurrence. Gaps in collected data caused by faulty instruments or control system equipment shall not be included in average). minimum and maximum compilations. 24 (j) Report GenerationThe system shall be provided with a report generator utility which shall enable authorised users to create, delete or modify report definitions The report definitions shall allow for retrieval of data from on-line database and farm historical data files and for formatting data for output to printer. The format of each report shall be definable by user to include the definition of static or background data, placement of data base values, number of significant digits of a value, date and time of report and calculated values(k)Graphic Display GenerationThe system shall be provided with an interactive on-screen graphic generation utility which shall allow an authorised user to create new graphic displays and modify or delete existing displays at any work station including those associated with the LCP/ outstations. The generation utility shall include an interactive linkage process allowing user to link symbolic, numeric and bar graph representations and data entry locations to dynamic data base variables. The graphic display system shall be capable of making full use of the VDU resolution in the composition and display of graphic information. Graphic symbols shall be definable by the user for display of static and dynamic data. The user shall be able to as5emble a library of symbols which shall be retrievable into any graphic display. Text and symbols shall be able to be enlarged, shrunk, moved, mirrored or related with reference to a given display. The system shall be able to represent dynamic analogue data on a graphic display as a variable-length, sizeable bar graph, as well as numeric text. 25 (l)DisplaysGeneral all displays, excepting those containing data derived from historical files, shall be completely displayed within two seconds of the operators request. Dynamic data shall be continuously updated while being displayed. All screen displays shall provide following displays which shall be fixed in their locations to normal operations:• Alarm banner window at bottom of the screen display showing last three highestpriority unaccepted alarms. Where the system allows contents of banner to be limited (eg by user name or group) then the selection criteria applied shall be displayed with the banner.• Main display area for user selected displays e.g. mimics, alarm lists, etc.• System dialogue banner window at bottom of the screen shall display relevant system information such as error message and user prompts 26 •A day, date and time indicator shall be able to show local time an alarm bannerarea shall be included on all displays which provide information regarding most resentalarm events. The system shall allow operator to obtain details of most recent alarm event from any operational screen display through direct operation using a maximum oftwo keystrokes or selections. The system shall allow the operator to obtain a print of any display, including graphics through use of a standard system command. Screen displays shall appear identical incorporated form Dynamic data contained on a display shall not change during screen print Such that a snapshot of conditions is portrayed. Each display shall include time of day in hoursminutes and seconds and date in day, month and year format.•A facility shall be provided which allows paging to related displays through the use of ‘page forward or backward keys, or through the use of pick points(m) Suitable size of HT & LT XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts and 1100 Volts grade with stranded aluminium / copper conductor of size as per OEM recommendation and approved design ISI markedincluding cable glands, lugs, jointing kit etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories and necessary earthwork, civil work deemed to be included in quoted rates of the above items.(n)Generic Displays.The system shall produce various generic displays automatically 27 Metering arrangements: (A)Suitable bi-directional metering arrangements with recording facility shall be provided as per the norms of WBSEDCL. The metering arrangements must have feature to measure and record, (i)Parameters of KW, KWh, KVAR, voltage, current, PF and any other metering required to determine efficiency and efficacy of the system. (B) LT 3 Phase 4 Wire Electronic Tri vector Meter with CT ratioshould be as per capacity of SPV plant. (i) Standard: IS 13779:1999 / CBIP 88 (ii) Accuracy: Class 0.5 (ii) The metering arrangement shall have inbuilt Solar PV Plant synchronisation features. (iii) Reference Voltage - 3x240 V (iv) Basic Current (Ib)- 5 A (v) Maximum continuous current (Imax) - 10 A (vi) Rated Frequency (variation) - 50Hz (±5%) 28 (vii) Power consumption:- Voltage circuit: Less than 1.5 W and 10 VA per Phase at reference voltage, reference temperature and reference frequency Current circuit: Less than 1 VA per phase at basic current, reference frequency and reference temperature (viii) Display type: 8 digit 7 segment backlit LCD display, not less than10 mm character height (ix) Display in the event of Power Failure: Internal battery back-up for LCD display (x)Communication port: Galvanically isolated Optical Communication port for data transfer through either CMRI or remote device or both is providedwith RS 485 for DLMS protocol (C) CT/PT operatedenergy meter with following features (i) True four quadrant metering (iii) Time and day metering with maximum demand registration and automatic billing (iv) LCD display with announciators for various critical events (v) Scroll lock feature for continuous display of a desired parameter on display (vi) High resolution energy display mode for dial test (vii) DLMS protocol for meter reading, with option to remote reading port. 29 (viii) Advanced event detection features for voltage, current and magnetic influence (ix) Meter reading in absence of mains, using internal battery. (x)Power Manager Device Nano type with 4 inverter support with energy monitoring, zero export control, Load Management having RS-485 communication port, ethernet including RS 485 cable core size 0.5-1.5 Sqmm to establish communication between inverters, SCADA and sensor as per OEM recommendation with and including all connectedaccessoriesdeemed to be included quoted rates.(xi) Digital WIND SPEED SENSOR withminimum 3 cup Anemometer range 0 to 70 Mtr/ Sec distance constant 2.5 Mtrs output TTL Pulses output proportional to wind speed and diameter of cup 50mm with brass housing and stainless stell shaft(xii) WIND DIRECTIONSENSOR with wind vane and sensing vain coupledto linear endlsess potentio meter IP 67, range 0-357degrees, operating temperature -40 to +60 degrees celsiuswith brass housing and stainless stell shaft and aluminium vane complete 30 (xiii) AIR TEMPERATURE SENSOR withRTD sensing element PT100 mounted inside a weather shield duly coated with weather proof reflective white paint , range -40 degree to +60 degree celsius with nylon body housingwith weather shield and brass stem to mount the sensor, includingpower requirment 5 Volt DC complete. (xiv) MODULE TEMPERATURE SENSOR Model PT 1000 measuring range -40 Degreeto + 80 Degree Celcius with suitable ouput as required and directed on site and mounting on RTD encapsulated in suitable housing including connecting cables as required complete.(xv)Tipping Bucket Rain Gauge with Magnet and Red Switch type Sensing, rim diameter 203 mm and collecting are 335 MM SQ, Rain gauge shell made up of FRP bucket and mounting made up of stainless steel SS316 and unlimted capacity,including connecting cables as required complete.(xvi)SOLAR Radition Sensor ARN 8101 with 72 element thermo pile sensor and spectral range 0.3 to 3 Micro Mtrs and sensitivity 20 Micro Volt/ W/M², range 0 to 1500W/SQM & output 0 to 25 milli Volt and operating temp -10 to 70 Degree Celsiusincluding connecting cables as required complete with all fixing arrangment and necessary civil work complete with including all connectedaccessories as per OEM recommendation/Designcomplete: 31 (L)Step up solar transformer (800 volt/11 KV)” - Design,procure,erection, installation, testing and commisioning including connecting to local utility grid :Oil filled Type 3 phase, 50 Hz, ONAN cooling type, vector group of appropriatetype, number of load voltage Ratio: number of Phases / Freq.: 3 Phase / 50 Hz., Sealed type Copper wound Transformer with Off Load Tap Changing Arrangement on HV side in steps of 2.5% , +5% to -10% having cable end boxes on HV side suitable for 3 Crore X 300 Sq. mm. XLPE cable of 11 kV grade on HT side and LV side complete with all accessories like buchholz relay, Oil temperature indication, winding temperature indication and alarm etc preferbly DMCR Protection Relay i/c first filling of filtered dehydrated K Class natural Ester Oil bioTransol (as per IS 16659) and confirming to IS 1180 and losses shall be as energyefficiency Level 3 only & 100% load phase, with an impedence of 6.25% i/c as per specification below complete in all respects as required at site. Design ambient to be considered as 50 Deg C.All the balance parameter like temp rise, Basic insulation level, flux density etc shall be strictly in accordance with IS 1180 Part - 1 only including necessary earth work, PCC plinth foundation etc.Heat Run Test is the mandotary test for each Transformer.Standard: The equipment shall conform to the latest edition of applicable standards as follows. In case of conflict between applicable standards and this specification, this specification shall govern.• IS 2026 Standard for Oil filled Transformer• IS:3639 for Fittings and Accessories• IS:2099 for Bushings > 1000 V• IS:7421 for Bushings < 1000 V• IS:1271 for Electrical Insulation classified by Thermal stability• IEC 62770 Natural Ester Oil• CBIP Guidelines 32 (xvii) CORE : Transformer shall be double wound, core type with low loss, non-ageing, high permeability PRIMEGRADE, CRGO with M4 Grade or Better, perfectly insulated and clamped to minimize noise and vibrations. Followings should be Mandatory for any manufacturer: -(a) Transformer shall be of BOLTLESS core design.(b) Core shall be purchased Directly from Manufacturer or from their accreditedMarketingorganization of Repute & not through any agent. Bidder has to submit manufacturer’s name during bidding having sufficient credential & Core has to be purchased from the approved manufacturer.(c) Stage inspection of the core shall be done at manufacturer’s premises & inspection call shall be given with following Documents: (i) Invoice of the supplier (ii) Mill’s test certificate (iii) Packing list (iv) Bill of landing & Bill of Entry certificate by customs(d) Transformer manufacturer should have in-house core cutting facilities for proper control & monitoring of quality & to avoid mixing of Prime core with Second grade /defective core materials. Transformer Manufacturer should have in-house slitting Machine so that core is cut to width & stacked with minimum air gap thus ensuring Burr level less than 10Microns.(e) Core shall be procured from one of these reputed Manufacturers : Posco / Nippon/ Novex/ Ak Steels.(f) The insulation structure for the core to bolts and core to clamp plates shall be such as to withstand a voltage of 2000V for one minute. 33 (xviii)Tank:Tank should be of corrugated wall construction type. The exterior of tank and other steel surfaces exposed to the weather shall be thoroughly cleaned and have a priming coat of zinc chromate applied. The second coat shall be of an oil and weather-resistant nature, preferably of distinct colour from the prime and finish coats. The final coat shall be of a flossy, oil and weather resisting non-fading paint of specified shade. The interior of the tank shall be cleaned by shot blasting and painting with two coats of heat resistant and oil insoluble paint.Winding:(a) Winding shall be made with 99.9% pure electrolytic grade copper, insulated with thermally upgraded paper (Insulation Class A / Conductor Turn Insulation-Class E).The HV & LV winding should be able withstand thermal and mechanical stress in the event of short circuit.(b)Winding shall be carried in dust free area(c) The completed core and coil assembly shall be dried in vacuum and shall be immediately impregnated with oil after the drying process to ensure elimination of air and moisture within the insulation.Oil type: TransformerTransformer oil shall be as per IS-335:1993. It shall be natural/synthetic ester oil. The material safety Data Sheets (MSDS) for the Transformer oil shall be submitted by the bidder along with the offer Temperature Indicator:One set of winding temperature indicators with necessary current transformer, heating coil and a detector element and one set of oil temperature indicator with maximum reading pointer shall be mounted locally so as to be readable at a standing height from ground level. Each of the above indicators shall be provided with necessary contacts for alarm and trip: (a) Oil Insulation class : K class. It should also exhibit safety against fire hazards 34 (b) Cooling : ONAN(c) Vector Group: to be decided during design.(d) Percentage Impedance (Z%) 6.25 %.(e) Transformer Losses:as per IS 1180 - Level 1(2021)(f) Taps on HV for HV variation : +5 to -10 % in steps of 2.5% each (g) Termination (HV): Cable End box for11 KV cableof suitable size(h) Termination (LV): Cable connection(j) The transformer shall be supplied with following fittings:(k) Lifting lugs and Jack lifting pad support(l) Earthing terminals - to be decided during design. 35 (M)Earthing :The complete system shall include chemical earthing of required quantity for step-up Transformer (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes and for LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines.No separate cost of the same is included in the schedule and amount will be paid to the contractor on this account in case of any dispute decision of Engr in charge will be final and binding to contractor. (The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474).Earth resistance shall not be more than 3 Ohms. 36 IMPORTANT NOTE FOR SOLAR POWER PLANT CONTRACT (COST DEEMED TO BE INCLUDED IN QUOTED RATES :-(1) The item specification and details given are for guidance purposes only and are likely to vary with modified / higher specification than that specified in the BoQ based on detailed site survey, solar potential assessment, design approval etc keeping the quantity of Solar inverter (PCU) and Solar Transformer same as in the BoQ. The items as per the finalized and approved design and specification, including make, shall be provided by the contractor without any extra cost to the department. All makes should be as per the latest MNRE approved list of makes and models.2.Cost of preparation of DPR design vetting from NISE/MNRE approved Institute and net billing arrangement (as per WBSEDCL) is deemed to be included in the quoted rate.3.The contractor shall submit complete design of Solar power plant, Schemetic/line drawings, detailed mounting structure array layout drawings alongwith SBC report based on the soil investigation as per OEM recommendation, Single line diagram with and including project reportand connected document shall be submitted by OEM through contractor prior to commencement of the work for approval of Accepting officer and subject to the drawing and designduly vetted by IIT/NIT (for mounting structure only) and vetted by NISE/ SECIfor entire scheme of Solar Power GenerationProject including evacuation and Net Metering arrangement complete before recommendation by GE for approval of the accepting Officer. 37 (i) The scope of works involves engineering, procurement & construction (EPC) of entire Solar Power Plant of capacity 0.8 MWp.4. The entire work shall be executed directly by OEMonly through contractor and contractor has to submit the MoU with OEM (agreement period for 25 years of entire Solar Power Plant Project) prior to commencement of work and same shall be approved byGE. 5. Boring of holes under road, pavement, hard standing by trenchless technology (HDD) GI protection pipe up to 100 mm bore (dia), maximum 2.5 metre below of apron areain any type of soilcomplete.Note : (i) All the precaution to be taken by the contractor before drilling the bore. The contractor has to take plan of existing cables any type and pipe line in existing area before drilling the bore. (ii) Any damage to existing cables any type and pipe line in the way of drilling the bore have to berepaired and made good by the contractor within 24 hours. No extra cost will be paid in this account. (iii) Contractor has to get the survey of route, length and depth for boring before quoting the rate. (iv) Connected items like HDPE/PPR/DWCPE pipes for entire Solar Power Plant Project, exavation, removing, return filing, channel, any type of metal work is deemed to be included in the quoted rate. 38 6.Cost of comprehensive maintenance as per OEM recommendation alongwith cost of spare parts required during 5 years of defect liabilty period after completion of Ph-I is deemed to be included in the quoted rate.7. Bidders attention is drawn to pre-bid conferance with department and also visit the site prior to bidding and other factor required as per OEM recommendation deemed to be included in quoted rates.8. The contractor has to carryout Pre-commissioning test of solar power plant including stepup transformer by CEI/SEI. The necessary tools and plants required for inspection of the plant shall be arranged by the contractor.and costsare inclusive in quoted rates.9. Contractor needs to know the irradiance of the location at the project before quoting. The contractor will design DCR (Make in India) for entire Solar Power Plant according to irradiance of the project location and efficiency of the components to produce the desired peak value as mentioned in the schedule i.e. 800 KW output on 11 KV AC supply and inject to the proposed RMU 11 KV. 10. During the execution of work any type of damage by elephant or monkey manance, contractor is fully responsible for protection of all solar power plant equipments including connected items i.e. PV Module, Inverter etc. No claim will be sought from the department. 39 11. All SCADA related activities viz. cables till SMBS and inverter and the requisite software and hardwarefor control room shall be included in the quoted rate.12. Vegetation Growth should be controlled by use of Deweeding Chemicals deemed to be included in Quoted Rates.13. Adequate Water Storage Facility of capacity 10000 Ltrs PVC Tank 5 Layer (with guarantee of 10 years after physical completion of work) on PCC Platform including suitable foundation for cleaning of PV Modules and suitable water drainage facilitiesfor both (Rain Water and Cleaning Water) from proposed site to existing drainage chamber is deemed to be included in the quoted rate.14. Solar Transformer fed from the Inverter should not be having odd harmonics (certificate needs to be required before physical completion of work).15.The Shutdown duration of Inverter should be monitored and recorded and analyzed. 40 16. The SPV Power Plant will be capable of generating 800 kW AC Output atleast once in a year and the AC Output of the plant will be not less than 90% of initial output by the end of 10 yearsand not less than 80% of the initial output by the end of 25 years.17. The Contractor shall operate and maintain Fire Protection System and safety equipments for the entire Solar Power Plant for 10 Years and cost of the spare is deemed to be included in the quoted rates.18.The firefighting system for the proposed power plant for fire protection shall be consisting of:a) Portable fire extinguishers in the control room for fire caused by electrical short circuitsb) Sand buckets in the control roomc) The installation of Fire Extinguishers should conform to TAC regulations and BIS standards. The fire extinguishers shall be provided for control room housing, PV array installation.19.Solar Components shall not be connected to LAN, WAN, or any Internal Data/OPS nw. 41 20.Sys with Bluetooth, GSM, Wi-Fi, or any Telemetry features should be avoided, unless explicitly cleared monitored.21. Finalization Of Feasibility Report, Design, Engineering, Transportation, Storage, Insurance, Civil Works, Erection, Testing & Commissioning etc., ensuring net-billing as per state net billing policy, quality control of grid connected.22.The Comprehensive Maintenance of SPV Plant would include wear, tear, overhauling, machine breakdown, insurance and replacement of defective modules, Inverters/PCU, spares, consumables & other partsas pe OEM reocmmendation and specification for 5 (Five) years under DLP of Phase-I..23.The Contractor shall arrange technical vetting of the plant during execution by the Cyber/INT officer and training by Unit Technical Pers till defect liability stage of Phase-I. 42 24.a) An energy meter (for net-billing) shall be installed between the solar Grid-tied inverter and the building distribution board to measure gross solar AC energy production (the Solar Generation Meter). The Solar Generation Meter shall be of the same accuracy class as the DISCOM service connection meter or as specified by local regulatory requirements. Separate for two different buildings.b) The bidder must take approval/NOC from the Concerned DISCOM for the connectivity, technical feasibility, and synchronization of SPV plant (if required).c) Contractor shall be provided system software (Cloud) for data hosting of Solar Power Plant with the Government approved agency and also audited by CERT-In (Computer Emergency respose team-India) is deemed to be included in the quoted rates. 25.a) Two sets of Engineering, electrical drawings, and Installation and O&M manuals are to be supplied. Bidders shall provide complete technical datasheets for each equipment giving details of the specifications along with make/makes in their bid along with the basic design of the power plant and power evacuation, synchronization, along with protection equipment is deemed to be included in the quoted rates. 43 b) All test and calibration certificates, wherever applicable.26. The bidder shall take entire responsibility for the electrical safety of the installation(s) and personnel, including connectivity with the grid and follow all the safety rules & regulations applicable as per local guidelines and regulations, etc. Insurance of the installers (of the vendor) working abroad is mandatory.27. (a) The bidder shall take entire responsibility for the electrical safety of the installation(s) and personnel, including connectivity with the grid and follow all the safety rules & regulations applicable as per local guidelines and regulations, etc. Insurance of the installers (of the vendor) working abroad is mandatory.(b) The contractor will carry out fortnightly, monthly, quarterly and annual maintenance as per Proforma of Appendix here-in-after respectively. In case the contractor fails to carry out the above maintenance following penalty per Solar will be imposed. 44 (i) Not carrying out maintenance fortnightly- Rs 2500.00(ii) Not carrying out maintenance Monthly- Rs 5000.00(iii) Not carrying out maintenance quarterly- Rs 7000.00(iv) Not carrying out maintenance annually - Rs 10000.00(c) The Contractor shall be responsible for ensuring production of 800 kW AC output of electricity at the injection point of RMU atleast once in a year from the SPV plant. In case the output is less than 800 kW AC unit, it will be deemed as under-designed plant. The contractor will be responsible for making good the shortfall by repair / replacement of the SPV Plant free of cost. Delay in this regard will attract monetary penalty to be amounted for the period wef very next day of the completion of Phase-I to the date of completion of rectification / replacement by multiplying the maximum value of units less generated than 800 kW AC for every day with the prevailing rate of electricity tariff of WBSEDCL Rate of electricity in West Bengal is Rs 6.52 per unit as in Sep 2025.(d) Maintenance and supervision shall be done by trained men for the safe operation of Solar’s contractor shall carry out fortnightly servicing including adjustment lubrication, repair of replacement fo parts if necessary. In addition to fortnightly servicing contractor’s senior mechanic of foreman shall carryout the inspection as per maintenance schedule and make necessary entries in the proforma attached here-in-after duly signed by Contractor & Engg-in-Charge as applicable kept in the switch room for this purpose. It will be the responsibility of the contractor to see that the maintenance schedule book is maintained properly by their senior mechanic or foreman. They shall promptly attend and call back & shall not be kept pending for more than 4 hours unless it has the prior approval of the Garrison Engineer. 45 (e) For any repairs/ replacement of Solar the contractor shall always be aware of time factor following are the fixed time (including Sunday/Holiday) for repair/replacement of parts/components/ accessories which shall be adhered to :- (i) Minor repair/ replacement- 4 hours (ii) Major repair/ replacement - 1day(f) The decision of the GE regarding Minor/Major repair shall be final conclusive and binding. In case of failure on the part of the contractor to keep the solar’s in running condition within the stipulated period mentioned in above the contractor is to pay penalty charges as mentioned below subject maximum of 10% of the total contract value and after that measurement will not be considered for the same defective Solar till it is in satisfactory working condition :-(i)Upto 12 hours @ 2000/-(ii) Above 12 Hours and up to 24 hours @ 5000/-.28. RFID Tag scanner of reputed make shall be provided by the contractor is deemed to be included in the quoted rates.29. Existing Room at 33 KV Switch Yard shall be used for SCADA/ Solar equipment/Control Room. 46 30. Surface preparation and laying of light yellow/white coloured interlocking tiles of appropriate thickness under the whole area of PV module array to make a reflecting surface for bifacial Solar PV module alongwith periodical water sprinkling arrangement for cooling of interlocking tiles is deemed to be included in the quoted rates. 31.The complete system shall include chemical earthing (as per OEM recommendations) and earth strip/cable etc for earth of SPV module, array, inverter,DC & AC boxes /LA etc as per latest IS/MNRE/IREDA/NISE/SECI/ALMM specifications and guidelines is deemed to be included in the quoted rates. Earth resistance shall not be more than 3 Ohms .32. The mounting steel structure shall be as per IS 2061-1992 and galvanizing as per IS 4759 and should withstand WIND Load as per relevant IS Code/NBC.33.Soil Stabliztion testing certificate needs to be required before completion of physical completion of work (Phase-I) so that the performance of the PV Plant is not affected in Highly Soiled areas for minimum 25 years. 47 34. M&O (Phase-II) should be finalize at the planning stage itself. The important point are as under:- (a) The thermal imaging of pv panel should be taken once a year for checking its health including hot spots.(b) The cleaning cycle of panel should be fixed as per the ratio of short circuit current falling below 0.9. The cleaning provision shoul be made available before evacuating the power.(c) The shutdown duration of inverter should be monitored and recorded and analyzed 48 Supplying, Installation, Testing & Commissioning including design, manufacture and testing at works of indoor type , IP 4X ,floor mounted metal clad, 11 KV VCB panel board totally enclosed & fully interlocked, Horizontal drawout, Horizontal isolation type breaker as per IEC-62271-100/200, as amended up to date and additional specifications, having capacities as mentioned below, single break, trip free mechanism, motor charged and manually/electrically closing breaker suitable for use on 11 KV,3 Phase, 50Hz A.C. supply with STC 25 KA for 3 Sec.Internal Arc for AFLR 25kA at rated voltage for 0.1s at individual compartments i.e. Busbar, VCB and cable compartment.complete with self contained, fully interlocked, rack in and rack out mechanism, air insulated and encapsulated copper bus bars of 800 Amps capacity, breaker featured with mechanical ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 8 NO + 8 NC andequipped with following switch gears and accessories.The panel shall be complete with following switchgear and accessories. The structure of the switchgear must be fabricated using steel sheets coatedwith Alu-Zinc (Aluminium Zinc alloy)/PRINTED CRCA All major sub-components (switchgear, relays, meter & vacuum interrupters) shall be of same make. VCB and vacuum interrupters shall be designed for 100 short circuit operations at full short circuit of 25KA. Breaker shall be roll on floor type/ CASSET TYPE. Separate earthing truck shall be required for each bus earthing & cable earthing. Earthing truck shall be so designed that it is impossible to earth a live. It shall be provided with capacitive voltage divider and complete with audio visual annunciation, one for each panel. Item Continued as 2.01 to 2.04 49 INCOMINGS & Outgoing VCBs :Type : Air insulated VCB, autoreclosing, system voltage :- 11kV + 5%, 50 Hz+ 5%, 3 phase, rated voltage : 12kV, rated current : 800A in 40 ° C ambient, Short time rating for 3 sec : 26.3 kA, Short Circuit Making Current : 65 kA, insulation level (PF rms/ impulse peak) : 35 kA/75kA, System Ground : Solidly Earthed,Duty Cycle : 0 - 0.3 sec - CO - 3 min - CO, Break/ Make time :- Not more than 5 Cycle, Range for Auxiliary voltage for Closing / Tripping / Spring Charging : 85-110%/ 70-110%/85-110%. of rated voltage. The VCB must withstand 10000 mechanical, & 100 at rated short circuit current. The breakers should have auxiliary contact 6 No+ 6 NC, in minimum. The used Breakers will comply with IEC 62271/ IS 13118. Qty. - 3 Nos (1 no Incomer & 1 outgoings)Busbar: Rated Current : 800A @ 40°C ambient, Material : Silver Plated /Tined , High conductivity elecrolytic Copper Bus Bar sleeve :Heat Shrinkable PVC Sleeve with joints having full voltage soft PVC shroude Short time rating for 1sec :26.3kA -1 setCurrent Transformer:Voltage class: As specified in Circuit breaker ; Type: cast resin type, Dual core, Dual Ratio , Barden :10VA; Class insulation : Class E or better . Protection core: 5P10, Metering : 1.0 , Short time rating for 1 sec :26.3kA Ratio :300-150/1-1, 7 setsBus Potential Transformer: Rated Voltage : Primary - 11000 / ✓3 , Sec -110✓3; Type : Cast resin , draw out type, 3- phase , 3-limb complete with HV fuses . Barden : 100VA per phase ; Class of insulation : Class F or Better , Accuracy Class: 1.0;Rated Voltage factor : 1.2 continuous, 1.5 for 30 Secs. PT shouldbe drawnout type and serivce continuously shall be indepandent of Breaker trolly position...1set 50 Relay for Control & Protection: Numerical Type IDMT Relay (50/51, 50N/5IN) with two elements for overcurrent and earth fault having settings 50% to 200% for overcurrent and 20% to 80% for earth fault in equal steps with time and current settings and high set instantaneous unit. Additionally, condition monitoring CB wear, condition monitoring CT supervision, disturbance recorder, undervoltage & over voltage protection, trip circuit supervisioncan be measured through the relay. The device shall support webserver/web HMI through which we can monitor and control the relays over a ethernet Lan network. Licenses for theprogramming software shall be provided free of cost.The numerical relay shall have large mimic-based LCD screen display . .The relay shall have 8 Digital inputs and 8 Digital Outputs and one additional watchdog ouput.The device has to aloe controlling of min. six objects (circuit breakers, disconnectors and grounding switches). Controlling has to be done by “select-execute” or “direct control” principle. Controlling has to be possible by: through local HMI, remote communication, via digital input or via function key. Events has to be readable to SCADA systems, front panel or by setting software.The sample rate of the recording has to settable to 32samples/cycle.The devices shall provide storage up to events 2000 based on the resolution.The device shall support following communication protocols: Native IEC 61850 ed1 & ed2, Modbus TCP. The IEC 61850 communication has to support peer to peer communication (GOOSE) if requiredThe IEC 61850 interface must be able to configure through setting software. Also the same setting software has to be able to generate ICD filesThe device shall have KEMA IEC61850 edition 2 certificates - 3 sets. High Speed Master Trip relay VAX31- 3 Set, Ttrip circuit supervision relay-VAJH13-3 set6 Window Annunciation Facia . with ACCEPT, RESET & TEST Push Button - 3 set . Auxillary relay for Transmission faults (VAA33)- - 3 Set 51 Metering: Meters: 1-NosUL&CE Multifunction Digital meter displaying Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cyclewith ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.Temperature Monitoring Sensor for the Three Phases of Incomer VCB Panel :Supply, installation, testing & commissioning ofthermal monitoring system to be provided to detect abnormal temperatures due to faulty connections and to prevent equipment B19damage. The switchgear shall have wireless temperature measurement sensors at all critical points:(a) 3 nos. foreach phase at incoming side cable joints The wireless temperature sensors installed on conductors shall be :(i) Installed with direct contact to hot point, to achieve accuracy of +/- 2°C(ii) Self-power (no auxiliary supply, no battery)(a) communicate wirelessly(c) Operate from -25°C to 125 °CThe system shall allow 2 configurable thresholds (pre-alarm and alarm). This system shall have integrated algorithms enabling to anticipate as early as possible an abnormal temperature, before damage occur (strong predictive capacity) and generate alarm through SCADA/monitoring software. Thermal sensor shall beself powered by the network current. Temperature data is sent via Zigbee wireless communication to provide high performance and accurate thermal monitoring. The sensor is secured to the connection point and is in direct contact with the measured point. Smartphones or tablets (with a Zigbee communication dongle) can be used with our Thermal Connect mobile application to scan data locally and can replace the need of periodic infrared scanning. Thermal sensors should comply to following standards:1 EN/IEC 61010,2010 2. UL 61010-12, 20123. ETSI EN 300238, 2012 V1.0.1 4. IEEE 802.15.4, 2013 52 Power Pack shall be with 220Volt AC Input & 24 volt DC continuous output suitable for closing /tripping indication of HT panel boards with 2nos 12Volt 100AH maintenance free batteries, chatging unit for trip system complete with suitable capacity dogital MFM connections with 2.5sq mm FRLS inaulated copper conductor cable etc as required.-4 set.The 11 KV HT Switchboard of 1 panel,shall bewith all accessories, interconnections,internal wiring, labels, space heaters etc. complete as required.3 panels shall be mechanically interlocked in such a way that only one operates at a time and multifunctional digital meters shall be interconnected and programmed in such a way that total consumption will come in one meter summating both of them.Note: 1. Quotated rates shall be inclusive of construction of foundation for the installation of VCB as per OEM drawing.2. The equipment shall be tested by SEI post sucessful installtion and report shall be submitted to this office. 53 Design, Manufacturing, Supply, Installation, Testing and Commissioning of 3 way 12 kV rated Ring Main Unit ofwith Fault Level 21KA 3 sec internal ARC 1 sec for tank and cable box , consisiting of 630A12 kV rated , 2 nos motorized type VCB as incomers & 1 load break switch as outgoings with metering modules along with necessary Earth Switches,battery and battery charger for shunt trip arrangement andMotor and other auxiliary circuit operation, HT CopperBus bar with current density not more than 1.6A/sq. mm as per detailed description as follows: RMU Construction: The switchgear and busbar shall all be contained in a stainless steel enclosure filled with SF6 at 0.3 bar (300 hPa) relative pressure to ensure the insulation and breaking functions. Sealed for life, the enclosure shall meet the sealed pressure system criterion in accordance with the IEC 62271-1 standard (§ 3.6.5.4): a volume for which no further gas processing is required during its entire expected life”. In addition, manufacturer shall confirm that maximum leakage rate is lower than 0,1 % / year. It shall provide full insulation, making the switchgear insensitive to the environment (temporary flooding, high humidity...), IP67 degrees of protection in accordance with recommendation IEC 60529 § 14.2.7. No SF6 gas handling required at site. Thus assembled, the active parts of the switchgear shall be maintenance-free and the switchboard shall be low-maintenance. The switchgear operating mechanism shall have an IP2X protection and cable chamber shall be IP55, Over all IP protection shall be IP55 . The tank shall be made of at least 2mm unpainted stainless steel. Item Continued as 3.01 to 3.05 54 VCB is the preferred dielectric medium for MV RMUs. Oil filled switchgear will not be considered. RMU shall be in accordance with IEC 60376.Any accidental overpressure inside the sealed chamber will be limited by the opening of a pressure limiting device in the lower part of the enclosure. Gas will be released to the rear or the bottom of the switchboard away from the operator and internal arc tested for both cable and tank for 21KA 1sec AFLR with test conducted with minimum 3 functions TankNumber of mechanical operations of Circuit breaker 2000 O/C , Number of electrical operations at full loop current for LBS: 100 O/C , Number of electrical operations at full loop current for CB: 2000 O/C,. Manufacturer shall provide type test report to prove compliance with IEC 62271-200 Annex A, Internal arc classification class AFL with 21kA 1s for the enclosure. Make of the RMU, vaccum intrtupter , relay & meter shall be of same OEM. All the test certificate shall be in the name of the OEM only . If there is any name change / acquisition by other OEM happened for the RMU then test cerificates shall contain the new OEM name only.HT System : 3 phase -3 wire , HT Fault level21 kA, Power System earthing - solindly earthed at up stream source, HT Copper Bus with Short Time Curent rating 21 kA for 1 Sec ( 3Sec), Continuous current rating at least 630 A. tank and cable chamberof RMU must be IAC rated for 21 kA for 1 Sec AFLR. Design ambient to be considered as 40 Deg C.HT Circuit Breaker :(i) There shall be 1nos.load break switches as incomings and 2 nos 12 kV rated VCBas outgoing ( total 3 nos.) . The circuit breakers shall be fixed type. All of the switchgear shall be capable of withstanding this current without any damage being caused, in accordance with the recommendations IEC 62271-1 and IEC 62271-200.Loss of service continuity class: LSC2(ii) The Circuit Breaker must be rated for 12 kV ( nominal Voltage), 28 kV/75 kVp ,3 Phase, 50 Hz, Short Circuit Fault Level of 21 kA for 3 sec. 55 (iii) No. Of Close Coils - 01 no. operable at 24 V DC (85% - 110%)/ Spring Assited Closing, No. of Trip Coils - 01 nos. ,operabale at 24 V DC ( 70% - 110%) for shunt trip.(iv) Provision for supervision of the shunt Trip Circuits for the Trip Coils to be provided. (v)Switchgear classification: PM class(vi) Loss of service continuity class: LSC2(vii) Duty Cycle : O – 3min – CO – 3min – CO, Vacuum Circuit breaker shall be of M1, E2, C1 duty and capable for minimum 50 short circuit breaking operation at full short circuit level.(viii) STC rating 21 kA for 3 Sec (for Vacuum Interrupter).(ix)Vacuum Interruptor must be hermetically sealed and must comply IEC 60056 ( along with latest amendments). Vaccum interrupter shall be of same make as RMU(x)Circuit Breaker to be equipped with Suitable tripping arrangement with push button, Mechanical counter to assess the total number of operations of the breaker, Mechanical ON / OFF indicator, Auxiliary switches, Auxiliary Contacts( at least 2 NO + 2 NC of Class 2 category), Emergency trip push button.(xi) The Operating mechanism shall be spring charged motor operated/ spring assisted as per OEM type tested design type with Spring Charge Universal motor operable on 24 V DC / 230 V AC.(xii)Suitable monitoring of Bircuit Breaker status ( ON, OFF, Trip, CB Spring charged if applicable), Trip Circuit Healthy / Unhealthy, DC healthy/unhealthyto be provided using (xiii) Voltage Presence Indicator shall be provided against each HT circuit ( against each VCB) on line side for knowing the presence of line enerzisation status.(xiv)Number of Mechanical operations at full rated current for breaker: 2000 O/C 56 HT CT /PT : Load Break Switch - 11 KV, 630A, 21KA for 3sec Motorized Load break switch; with built in line side manual earth switch. Earthing should be completed within 2 operations only(i.e 1. Main switch - OFF, 2. Earth switch - ON). LBS shall have 3 positions, open or disconnected, closed and earthed, and will be constructed in such a way that interlocking prevents unauthorized operations. For earth switch, manual opening and closing will be driven by a fast-acting /snap action mechanism, independent of operator action. LBS and earth switch shall have a min of 1000 (M1) mechanical operations ,and 5 nos closing operations at rated SC current. LBS should have 100 electrical operations at rated current. LBS & Earth Switch should have separate apertures for operation.i) One set of 03 nos. ( for 3 phases) dual core Cast Resin CTs for Eachincomer VCBcomplying with IEC:60185 & IS 2705 ( along with latest amendments) , Core -1 - 400-200/1 A , 2.5 VA, Cl 0.5 for metering ; Core-2 - 400-200/1 A, 2.5 VA , 5P10 for Protection.ii) 01 no. of 03 phase Dual Core PT forHT bus ( 11 kV)with protection HRC fuseCore 1- 11kV /√3 / 110V/√3, Cl 0.5s, 50VACore 2- 11kV /√3 / 110V/3, Cl 3P, 50VA(iii) Multifunction Meter:2 Nos. 3 phaseDigital Multifunction Meter6400NGwith Voltage, Amps, kWh, kW, P.F., Active, reactive, apparent energy , disturbance direction detection, Individual harmonic up to the 63rd harmonic. at least 256 samples/cyclewith ethernet Port with inbuilt webserver and complying to IEC 61557-12, IEC 62053-22 certified by third party laboratory.for each VCB panel ( 96 mm x 96 mm) , Flush mounted, Class 1 conforming to IEC 62053-22 ( along with latest amendments). 57 Protection Relay: (i) 2 Nos. of Numerical Type Self-powered IDMT Relay(50/51, 50N/5IN) with two elements for overcurrent and earth fault having settings 50% to 200% for overcurrent and 20% to 80% for earth fault in equal steps with time and current settings and high set instantaneous unit. Relay should communicate on Modbus RS-485.(ii) Each VCB must have separate Anti Pumping Relay / Antipumping feature through motorization circuit.Fault Passageindicator: The FPI shall facilitate quick detection of faulty section of line. The fault indication may be on the basis of monitoring fault current flow through the device. The FPI should be self-powered and should have internal lithium battery for external indication and setting of FPI in the absence of current.The FPIs shall include: Fault detection - Phase to phase and Phase to earth faults.One potential- free output contacts for hardwiring to RTUs. On this basis, the SCADA/DMS will be able to monitor phase / earth fault condition.Local fault indications - LCD display on FPI front panel along with LED indication on front panel of RMU enclosure.Multiple reset option : End of time delay (Adjustable from 2 to 16 Hrs)Remote reset (Via potential free input contact of FPI)Manual reset (Reset button on front panel of FPI)Automatic reset on current restoration.The characteristics of the FPIs shall include: Phase fault thresholds configurable from at least 100 to 800 A,Earth fault thresholds configurable from at least 20 to 200 AMultiple number of steps for adjusting phase and earth fault thresholds. Fault current duration range configurable from at least 40 ms to 100 ms in 20 ms steps and further 100 ms to 300 ms in 50 ms steps. Variations with respect to these characteristics may be acceptable as long as they prove applicable and provide the same or better flexibility. 58 EARTHING : The cables shall be earthed by an earthing switch with short-circuit making capacity, in compliance with IEC 62271-102 standard. The earthing switch can only be operated when the switch is open. The switch and earthing switch operating mechanism shall have a mechanical endurance of at least 1000 operations. Integrated line side Earth switches shall be provided in each HT Circuit. ( against each VCB)RMU Bushing & Cable Termination: It is preferable to have all bushings accessible from the front of the RMU. Bushings along the sides or the rear of the RMU are not acceptable.For each cable compartment, the bushing shall be at the same height in order to facilitate a possible reversal of the cables. The bushing should be conveniently located for working with cables specified and allow for the termination of these cables: - 630 A M16 bolted connectors for switch-disconnectors and vacuum circuit breakers functions.The profiles of the cable connection bushings shall be in compliance with IEC-60137 standard. Cable clamps:A cable clamp arrangement must be provided for all network cables terminated on the RMU.Provision for Cable Entry: There shall be suitable provsion for Cable entry from bottom through 3 mm thick CRCA steel thick detachable gland plate along with provision for termination of 2 runs of 3 c X 300 Sq mm 11 kV (E ) , XLPE insulated Aluminium Cables (for HT side) and at LT side runs of cables matching with outgoing MCCB current rating.Note: (i) Quotated rates shall be inclusive of foundation for the installation of VCB as per OEM drawing.(ii) The equipment shall be tested by SEIaftersuccessful installtion and report shall be submitted to this office and cost deemed to inclusive in qoated rates 59 M&L for water proof, 3 core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade including PVC conduits properly fixed on steel poles using GI wire for electrical connection of street light fittings, complete all as specified and directed. 60 Supply and fixing junction box having protection dust proof, acid resistant, shock proof, fire retardent self extinguisher for outside installation with knockout entry for cable of size 10 - 25 sqmm andminimum size 295x195x95 mm with terminals, with and includingbrackets for street light pole mounting andone 6A MCB SP complete all as specified and directed. 61 M&L for Advanceencapsulated compound based Chemical earthing CPRI tesed maintenance free , pipein -pipe technology upgraded(Zinc & Alloy coated). , Zinc & Alloy coated (80 -100) microns with pure zinc (99.9%) & Alloy coating (200-250) microns. Earthing system conforming IS 3034. The outer and inner pipe should be 76.2 mm and 41.9 mm dia respectively of3 mtrs long zinc coated with additional special alloy coating 300 mm on top side for additional protection of the terminal . The annular space between the pipes to be filled up with Compactfill (CF) (Crystalline Conductive) mixture which should bemachine pressed in the pipes not disintegrate or collapse when outer pipe corrodes . The inner pipe should be extended with terminals for connectivity.The job includes digging the pitsin any type of hard densesoilof min size 1000 X 1000 X 3050 mm depth taking out excavated soil, lowering/ placing thethe pipe in pipe earth electrode in pit in center ,filling of pure conductolite back filling compound (BFC Conductolite) having excellent moisture retaining capacity in 300 mm around the electrode(minimum 4 bags of 25 KG per pit per unit) or more qty of backfillcompoundas required to fill around the the elctrode in 300 mmin circumfrance of electrode . Contractor has to fill the remaining portion of pit withlow resistivity soil (agriculture soil) free from stones etcs, to be bring from out side defence landas the soil resistivity ofStn is very high and mixed with min 3 Bags of 50 Kg each of Bantonide clay. The BFC should be eco friendly it should not contain envernmently hazardous material/metal having ROHS certification from NABL accredited lab.The earth pit should be provided with a FRP earth pit cover for protection and safe guard of terminals. The material of earth electrodeshould have good electrical conductivity & anti corrosion property in wide range of soil conditions. The job also include M & L for in PCC(1:3:6) typeC-1 around the FRP cover for support and foundation and colouring the PCC work withdesired colour.completeall as specified and directed. Item Continued as 6.01 62 Note : (i) Design of earth electrode should be of pipein-pipetechnology .(ii) Contractor have to submit literature of earth electrode and get the make approved of GE before procurement.(iii) The earth electrode shall be CPRI tested to withstand short current test for 60kA rms for 1.0 second and 150kA for peak current.(iv) Contarctor has to fill pure back fill compound conductolite all around the earth electrodein 300 mm bore up to full depth of bore.(v) Contractor shall refill the pit with low resistivity soil (agriculature soil ) free fron stone etc and mixed with 06 bags of Bentonite of 25 Kg each to achive the low resistance values. (vi) copper strip will be laid below 60 cm from ground level and connected to test point through plinth protection. This Earthing System used for VCB and RMU only. For Solar Power Plant Earthing System is already deemed to be included in quoted rates.(vii) Necessary cost of repair to plinth protection and connected plate and earth continuity conductor by providing 2 x brass nuts bolts and brazing of joints,bringing argiculture soil from out side defence land and cost of 6 x Bags of bentonidedeemed to be included in the item rate.(viii) Contractor has to clear the side and disposed off the excavated soil from pit on completion of work. 63 SAFETY EQUIPMENTSSupply and fixing Rubber hand gloves suitable for 11 KVas per OEM recommendationcomplete all as specified and directed. 64 S&F for glass framed Shock treatment chart both in Hindi & Englishand connected accessoriescomplete all as specified and directed. 65 S&F for dry powder chemical type 4.5 kg fire extinguiser with clamps and connectedaccessories ISI Marked complete all as specified and directed. 66 S&F for single line diagram, schematic diagrams etc. of A1 size on suitable Aluminium sheet including lamination etc. as required as per OEM recommendationcomplete all as specified and directed. 67 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. 68 Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, manholes, laying of UG cables/pipes etc. not exceeding 10 Sq.m on plan and getting out in soft/loose or any type of soil complete all as specified and directed. 69 Removing excavated material (soils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. 70 Returning filling in, soft/looseor any type of soil including spreading leveling watering and ramming complete all as specified and directed. 71 Excavation in post holes (or similar holes) in soft/loose soil each n.exc 0.50 cum, getting out,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface all as specified & as directed. 72 M&L for RCC M-20, design mix (using 20mm graded crushed stone aggregate), including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 73 M&L for steel tubular swaged poles complete with cast iron base plate, finial taper plugs, bolts, nuts & screws as specified type 410 SP-31, 9.0 meter longinclusive of two coats of aluminium paint over one primer coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.NOTE : (a) The poles shall confirm to IS - 2713 & each component pipe shall be ISI Marked & confirm to IS - 1161. (b) Necessary earthwork, PCC etc. shall be measured & paid separately under relevant items of work. 74 S & F LED Street lights nominal power 90 Watt, LED of Make Osram; Bridgelux ; Philips; Nicha; Cree; Samsung, LED wattage of minimum 3 watt each and Maximum 5 watt each, operational voltage of 170 volts to 270 volts, frequency of 50 Hz, lumen efficacy of minimum 120 lumens per watt, built-in integrated electronic LED driver, output open /short circuit protection, phase to phase protection, over voltage protection, surge voltage protection upto 4 KVs, protection grade IP 66, CRI greater than 80%, CW available CCT of 5700K, power factor of minimum 0.95, pressure die-cast aluminium alloy housing with polyester powder coated metallic silver finish after phosphochromate treatment, life span of minimum 50000 working hourswith IK10 and L70 on including fixing at any height and including wiring using three core PVC insulated, PVC sheathed, flexible stranded copper conductor FR-LSH cables suitable for outdoor use, 1.5 sqmm as per IS 694: 2010 complete all as specified and as directed.(i) If connection.cable from pole Juction box to street light and street light bracket up to 2 mtrs be included and measured in unit rate item, Beyond 2 mtrs of length to be paid seperately under respective items.(ii)At location where street lights/flood light are connected through overhead conductor, connection cable from light fitting to overhead conductor is deemed to be incl in the item rate. (iii) All LED street light/flood lights shall be properly connected with earth dolly provided with fittings and steel poles earth bolt.(iv)All LED lights have replacement warranty of 5 years from the date of completion of the contract accordingly condition 46 of GCC (IAFW-2249) shall be amended to extent mention above. Contractor has to submittwarranty certificate from manufacturer . Payment of light fitting will be released after receipt of 3 year replacement warranty certificate from manufacturer.(v) The LED lights will replaced bythe contractor free of cost in the case of manufacturing defects and Failure due to electrical impact if not connected properly with earth. Hence it is contractor responsibility to connect the light fitting earth wire and shall be grounded properly.(vi) The contractor shall submit the surge protection certificate and Type test certificate LM 79, LM 80 for luminaries from LED manufactutre. 75 M&L for Cement concrete (1:4:8) type D2, (Using 40mm graded crushed stone aggregate) as in foundations of poles and stay, filling and mass concrete complete all as specified and directed. 76 M&L for plain cement concrete (1:3:6), type-C2 (40mm graded crushed stone aggregate) as in foundation, filling and mass-concrete, coping etc for pole foundationwith and including necessary formwork complete all as specified and directed. 77 M&L PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete and copingwith and including necessary formwork complete all as specified and directed. 78 Material & labour for earthing complete with copper earth plate electrode 600 mm x 600 mm x 3.15 mm thick burried directly in ground (Earth pit not less than 4 mtr deep below ground level) with top edge of the plate not less than 3.25 mtrbelow ground level connected to copper strip 20 x 3.15 mm as earth lead by brass nut bolts washer including brazing the copper strip with copper plate as shown in electrical plate No 3 connected to earth test point including necessary excavation for earth pitin hard dense soil, rocky / disintergate rock, filling charcoal and salt around the plate in layers , filling the pit with low resistivity agriculture soil free from stones, to be bring from out side defence land and mixed with Bentonite , (4 bags of 25 Kg each ), construction ofinspection pit ( earth pit chamber) of brick work of size 600 x 600 x 600 mmwith PCC copping of 1 :1.5: 3, 12.5 mm aggregate A1 with MS sheet 2.8 mm plate cover on frame ofangle iron of size 40 x 40 x 5 mm with , wire mess, funnel, test point, 40 mm dia GI protection pipelightgrade and20 mm GI peforated pipefor wateringetc complete and testing on completion. The electrode and lead shall be of copper all as specified and directed by Engr-in-charge (Copper strip upto 7.5 RM will be included in the item rate and copper strip beyond 7.5 RM will be measured seperately Item Continued as 22.01 79 NOTE :-(i) Contractor shall uselow reisistivity fresh agriculture soil , mixed with 4 x Bags of bentoniteclay of 25 Kg each for refillingthe pit to achive the desired resistance.(ii) copper strip will be laid below 60 cm from ground level and connected to test point through plinth protection(iii) Necessary cost of repair to plinth protection as per existing specification and connected plate and earth continuity conductor by providing 2 x brass nuts bolts and brazing of joints,bringing argiculture soil from out side defence land and cost of 3 x Bags of bentonitedeemed to be included in the item rate.(iv) Contractor has to clear the side and disposed off the excavated soil from pit on completion of work.(v) Contractor has to submit test report of earthing after completing the earthing.(vi) Bentonite clay should be Conf to IS 6186: 1986.(vii) The cost ofCopper strip of size 20X3.15 mm from top of earth plate upto 7.5 meter above ground level is deemed to be included in the unit rate of above item.and copper strip beyond 7.5 RM will be measured seperately.(viii). All the joints in copper strip and connection with Earth Plate to be welded through brazing and in addition by proving brass nut bolt and washer are deemed to be included in the unit rate. (ix) Cost of brazing / welding and nut bolts are deemed to be included in the unit rate. (x) Cost includes removal of excavated soil upto a distance of 100 mtrs. 80 Supply and fixing copper strip of size 20 x 3.15mm as earth continuity conductor or main earthing lead fixed on V typeporcelain insulator, 4 BM, heavy duty ( ceramic bus bar supportinsulator off whitecolour ofsuitable for mounting strip of 20 mm wide x 3.15 min thick) saddle to wall, buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3.15 mm copper strip brazingto each joints and connected with by providingbrassnut boltsand washer including test point all as specified and directed by Engr in Charge. Note : Insulators shall be provided on every 50 cm. (Minimum 2 x insulators to be provided in every 1 x metre of strip and rate of the same deemed to included in quoated rates) 81 M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness, complete all as specified and directed. 82 Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1 with peak, size 300mm x 180mm x 40mm complete all as specified and as directed. 83 M&L for GI pipe 100 mm bore, light grade with all fittings and fixtures (ISI Marked), laid in trenches, under road or fixing on wall/ pole /crossing drain /nallah etc. of bore complete all as specified and directed. 84 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 85 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 86 Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc.with all fixing & connecting accessories complete all as specified and directed. 87 Supply, laying & testing PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 63 mm dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brss threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches complete all as specified and as directed.Note:The contractor shall submit 15 Years warranty certificate against leakageand defect liabilty period deemed to amended acordingly. 88 Supply, laying & testing PP-R IS-15801 (Polypropylene random co-polymer) pipe 3-layer 32 mm dia (outer green coloured UV stablilized, middle black coloured UV stabilized and innermost layer white coloured with anti-microbial property) fusion welded grade PN-10 SDR-11 ( Pressure nominal 10KGS/cm2 ) having thermal stability for hot & cold water supply including all types of plain and brss threaded PPR fittings of any size such as elbow, tees, FTA and MTA etc laid in trenches complete all as specified and as directed.Note:The contractor shall submit 15 Years warranty certificate against leakageand defect liabilty period deemed to amended acordingly. 89 S&F for 63mm (OD) PP-R Gate valves (brass insert)and connected acessories complete all as specified and as directed. 90 S&F for 32mm (OD) PP-R Gate valves (brass insert) nd connected acessories complete all as specified and as directed. 91 M&L for hard core of gauge not exceeding 63mm with broken stone or boulders, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed. 92 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 93 S&F for RCC pipes of 600 mm dia, NP-2 laid and jointed complete with collars complete all as specified and directed. 94 S&F for 250mm bore Flue pipes of mild steel sheet, black, in suitable lengths as approved by GE and fixed to walls complete all as specified and directed. 95 M&L for Brickwork with fly ash bricks (modular bricks ), straight or curved on plan exc 6m mean radius, built in cement mortar(1:6) complete all as specified and directed. 96 Material and labour for plastering 15 mm thick (in two coats of 10 mm and 5 mm thick) on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 with integral water proofing compound finished even and fair complete all as specified and as directed. Note: - Water proofing compound will be deemed to included in qoated rates. 97 M&L for applying three coats of white wash on newly plastered wall surfaces including preparation of surface complete all as specified and directed. 98 S & F hot rolled low tensile structural steel of grade E165 as per IS 15911: 2010 as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. Wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar works complete all as specified and as directed. 99 S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge. 100 S&F flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 101 S&F MS screw bolt (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 5 cm and n. exc 10 cm long, diameter of neck 5 to 10 mm complete all as specified and directed. 102 Supply and fixinggalvanized steel chain link fence fabric of mesh size as approved , made out of 4 mm nominal dia of mesh wireconforming to IS 2712-2003 and having zinc coating of type heavy as laid down in IS-4826 including line wires/ binding complete all as specified and as directed(A Board of Officers under the orders of GE shall be convened to ascertain the weight per square metre of galvanized steel wire chain link fencing brought at site by the contractor against each lot of materials). 103 S&F 10mm round bars Fe-410-W (Gde-250) quality-A or Fe-290-(Gde-E-165) as in stiffner to hold the chain link fencing fixed with angle iron post inclucinding necessary welding and fixing arrangement at ends complete all as specified and directed . 104 S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steelpins, etc. complete all as specified and directed . 105 Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. 106 Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface not exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed. 107 Materials and Labour for reinforced cement concrete M-20design mixin columns; pillars; piers; posts; struts etc,complete all as specified and directed. 108 S&F for Mild steel TMT bars 10mm dia and over, conforming to Fe 500 D, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 109 S & F for mild steel TMT bars 6 to 8 mm dia, conforming to Fe 500 D cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, stirup,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 110 M&L for construction of valve chamber with MS sheet cover 3mm thick with angle iron) frame of size 50 x 50 x 6mm and locking arrangements including painting one coat of primer followed by two coats of black sysnthetic paint including excvation and earth work in any type of soil,PCC (1:4:8) type D2 in foundation ,PCC benching 1:2;4 type B-1 ,PCC (1:5:8) block masonry 20 cm thick in cement mortor (1:6),10 mm thick plastering in CM 1:4 ,PCC bed in (1:3:6) and coping 50mm hick in cement concrete 1:2:4 type B1 using 20mm stone aggregate including necessary formwork,paintin one coat of red oxide and two coats of bituminious black paint on all steel surfaces as specified and as directed of sizes 800mm x 800mm x800mm (internnal dimensions) complete all as specified and as directed. 111 Sch A Part-II (Phase-II) 112 Providing Services for Manning and Operation of Solar Power Plant 0.8 MWp near 33 KV receiving stationat Sevoke Mil Station for FIRST YEAR after completion of Ph-I of the subject work with oneskilledcategory Electricianhaving certificate of Surya Mitra from NISE) for twoshifts of 8 hour, one helper (semi-skilled category) in two shift of 8 hrs eachcontinuous operation (including Sunday/Holiday) to maintain sub station in/out side Panels, Invertor, DC junction box, VCB as specified, including daily and weekly check up including cleaning of PV modules complete with suitable cleaning cloths etc , upkeeping the installation operational and in health condition, having own conveyance and communication system like mobile etc. complete, for Solar Power Plant with all minor consumable and expendable items and labour and tools for smooth and efficient operation complete all as specified and directed by Engineer-in-Charge. Make of spare parts / equipments of the Solar Power Plant :- Same as installed in the preceding phase of the work.Repair or replacement ofdefective components or spare parts will be carried out free of cost under DLP and comprehensive Maintenance as per OEM recommendation up to DLP period included in BOQ item No. 1.00. The Contractor may submit his claim for every months on pro-rata basis subject to condition 64 of IAFW-2249 (General Conditions of Contracts)The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 17,92,949.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. Item Continued as 56.02 to 56.06 113 NOTES :- In addition to and Manning, Operation and Maintenance of Solar Power Plant, the following works will also be carried out by deputing addl manpower where required, to the entire satisfaction of Engr-in-Charge.(a) Minor repairs and preventive maintenance required to ensure serviceability and efficiency of complete MRS complex including supply of HT 11 KV fuse wire of proper sizeand minor spares such as nut, bolts, spring, lock nut of VCB/OCB as per sample, broom, duster, grass cutting tools, phawara, pick axes for cleaning/grass cutting of complete at Sub Stn Complex. 114 (b) Record of activities such as voltage / current / PF / Energy consumed / temp of transformers, break downs, day to day maintenance of Solar PV Plant etc.(c) The contractor shall ensure that all safety precautions are strictly exercised by the staff employed by him.Adherance to IE rules and statutory rules in vogue must be ensured.The contractor shall be fully responsible for any mishap that occurs due to any fault of the employee or due to non adherance of safety norms.(d) Record of activities such as attendance register, duty roster, pay distribution register of the whole staff employed by the contractor.(e) The electrician staff employed by the contractor shall be ITI holder with four years experience. 115 (g) Security lights within the complex will be operate by the tenderer. (h) The under mentioned tool kitwill be provided at site with person on duty :-(i) Electrician tool kit such as screw driver set, tester, test lamp, cutting plier, insulation tape, fuse wire of required size. (ii) Tongue tester(iii) HT megger(iv) First aid box (v) Shock treatment chart duly framed(vi) 33 and 11 KV Hand gloves(vii) 33 KV discharge rod withcopper chain(viii)) Helmet -02 nos(ix) Suitable Footwear - 02 nos(x) Cotton protective clothing with long sleeves duly embossed with GE Sevoke as directed. The tenderersquoted rates shall be deemed to be include the cost of all above provisions and nothing extra will be paid on any account. 116 (xi) The Bidders shall abide by the latest Labour rules and minimum wages Act. Wagespaid by the bidders to the persons employed shall not be less than the minimum wages fixed by the state/central government from time to time whichever is higher. (xii) The Bidders is responsible for insurance, EPF, ESI, Bonus, Labour welfare cess et., as applicable and shall be paid to the workmen as per existing Labour rules/ Acts/ regulations and rate quoted shall be deemed to be included for the same.(xiii) Dress Code : The bidders shall provide the workmen with Dark Blue Colour uniform {formal pant & T-shirt} with labels showing/ printed i.e. Name of the firm and designation on front and on the back of the T-shirt along with protective clothing, Industrial safety shoes, protective gears like helmet, safety belt etc..(xiv) Supervision and attending of all incoming & outgoing Solar Power Plant equipment metering equipments & monitoring to loads & other parameters of incomming & outgoing feeders & maintaining log sheet and attendance sheet. 117 INSURANCE: The Bidders shall also insure the workmen employed on the job.The Bidders shall be responsible for all Accidents/Injuries happening to the workmen. Any accident causing minor/fatal injury, partial disability due to any untoward incident or non-adherence to safety and IE regulations or fault in maintaining of internal electric supply system or on account of any mishandling/ wrong operation/ lack of knowledge of safety precautions or on account of any circumstances beyond his/ their control, the bidders shall be solely responsible for settling all claims of compensation to the deceased, falling which department will have a right to recover any sum indicated/ claimed by Labour commissioner/court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Bidders shall provide first aid boxes to meet any emergency situations. 118 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for SECOND YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 18,75,076.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 119 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for THIRD YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 19,61,175.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 120 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for FOURTH YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 20,51,671.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 121 All as perBOQ serial item No 56.01 to 56.06 as mentioned here-in-before but for FIFTHYEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 21,46,848.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 122 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for SIXTH YEAR after completion of Ph-I of the subject work .NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 22,46,564.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 123 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for Seventh YEAR after completion of Ph-I.NOTE :- (a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 23,51,386.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 124 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but forEight YEAR after completion of Ph-I.NOTE :-(a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 24,61,315.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 125 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for Ninth YEAR after completion of Ph-I.NOTE :-(a)The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 25,76,917.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 126 All as per BOQ serial item No 56.01 to 56.06 as mentioned here in before but for TENTH YEAR after completion of Ph-I.NOTE :-(a) The bidders shall ensure that the quoted amount for O&M is not less than minimum fair wages i.e. quoted amount is not less than the prepriced amount i.e. Rs 27,03,441.00. If quoted amount is less than the prepriced amount, same will be amended to pre-priced amount.Amount so adjusted will be deducted from quoted amount against Sch A Part-I i.e. Item No. 1.00 of BOQ. Quoted Amount of tender as a whole will remain unchanged due to this adjustment. 127 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor FIRST YEAR after expiry of DLP of Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum andcost of item priced upto ₹500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost. Repairs of minor components any other major components are also in the scope and cost of labour for minor / major components is deemed to be included in the quoted rate for this item.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 128 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor SECOND YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted costrepairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 129 Comprehenisve maintenance ofSolar Power Plant 0.8 MWpfor THIRD YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 130 Comprehenisve maintenance ofSolar Power Plant 0.8 MWpfor FORTH YEAR after DLP of Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d)Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 131 Comprehenisve maintenance of Solar Power Plant 0.8 MWpfor FIFTH YEAR after DLPof Ph-I of the subject work with including periodical Check up andmaintenance as per OEM recommendation& connected accessories through Authorised Original Equipment Manufacturers Service Centre Engineersor through OEM Certified Agencies as approved by GE, complete all as specified and as directed. NOTE :-(a) Service engineer will carry scheduled preventative maintenance checks on SPV as per the standard check list of the OEM. (b) Service engineer shall carry out checks on Solar Plant, as per the manufacturer’s check list and as directed by Engr-in Charge and would correct / recommend / suggest improvement in operation and performance. (c) Service Engineer during the visit will report on the performance or any other abnormality and inform parts requirement, shall also submit the report on work done and recommendations as well as spare parts offers to the concerned authority for arrangement.(d) Cost of equipment and spare parts which is not covered in warranty and DLP shall be measured in PC Sum and cost up to Rs. 500.00 shall be deemed to be included in the comprehenisve maintenance quoted cost repairs of minor components any other major components are also in the scope of Annual Maintenance Contract.(e) Cost of gaskets, metal/rubber washer, CI washer special cement and small nuts/bolts and screws required for repair shall be deemed to be included in the unit rated quoted by the contractor. 132 Prime Cost Sum. The prime cost to be used as directed by the Accepting Officer vide Condition 1 (v) and 5 of IAFW-2249 (General Condition of Contracts) forming part of the tender documents.(a) Provide a prime cost of Rs.3,00,000.00 forsupply only of spare parts required for comprehensive maintenance after expiry of DLP of Phase-I, through a BOO convened by the CWE. The spares shall procured directly from the OEMs or their aurhorised distributor/dealer as approved by GE.(b) Bidders/Contractors quoted amount shall be inclusive of his overhead and profit and including all taxes and insert amount to cover all. The Bidders/Contractors is to quote lump sum amount under Column 6 covering all the aspects mentioned here in before, representing (%) percentage under Column 9, Above/Below (+ or - denomination) the Prime Cost Sum inserted by MES under Column 5. However, the quoted amount under Column 6 shall not exceed 15% (Fifteen Percentage) of Prime Cost Sum inserted by MES under Column 5. In case, the Bidders/Contractors quoted amount is in excess of 15% of the estimated amount, the same shall be restricted to 15% (Fifteen Percentage) and the amount quoted shall be corrected accordingly to work out the contract sum. Item Continued as 70.01 133 NOTE:-Prime Cost Sum shall be governed in terms of condition 1 (v) and 5 of IAFW-2249 (General Condition of Contract) and to be regularized through Deviation Order. The following procedure shall be adopted to execute the Prime Cost Sum :-(a) Step –I Service Engineer of OEM along with site executive shall visit every month for Preventive and corrective maintenance on all the Solar Power Plant as specified in BOQ herein before, and undertake routine comprehensive maintenance and identify the list of damage / defective spare parts in Solar Power Plant. Service Engineer have to submit report to concerned Engr-in Charge and BOO before undertaking replacement/ repairs, except in case of emergency.(b) Step –II Subsequently BOO will verify the same and submit the finding to the CWE after assembly of board in terms of CA Provision for concurrence.(c) Step –III After concurrence of BOO, the Engr-in-Charge will direct the contractor and the service provider to replace the unserviceable spare parts.(d) Step –IV Serviceability certificate of Solar Power Plant duly signed by the Service Engineer, BOO findings, GST enabled purchase voucher for the replaced spare parts alongwith draft DO details shall be submitted to the GE for placing of DO’s. The advance on account shall be accompanied alongwith the said DO’s for payment.
Contract Date: Mar 17, 2026 Contract Value : ₹ 6.86 Crore
Statutory Bodies & Commissions/Committees No of Bidders 6
West Bengal View Result →
29.
Defence #9526496 AOC
Tender For Additional / Alternator Of Vintage Building At Inf School Mhow; 2 Item No 01 : Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar 3 Item No 02 : Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing )and rubbish off the primeses complete all as specified 4 Item No 03 : M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT)/ Polished Glazed Vitrified Tiles (PGVT)10mm thick (square or rectangular) area of each tile exceeding 0.36 sqmbut not exceeding 0.72 sqm ( ie)size 600x1200 in floors etc set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tileover and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified and as directed. 5 Item No 04 : All as per item No 03above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified 6 Item No 05 : M&L for scratch free Vitrified Tiles 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.18sqmbut not exceeding 0.36 sqm (ie) ofsize 600x600mm in floors etc set and jointed in neat cement slurry and pointed incoloured cement to match with colour of tileover and including 15mm thick screed bed or bedding layerin cement mortar 1:6 complete all as specified 7 Item No 06 : All as per item No 05above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified 8 Item No 07 : M&L for glazed ceramic coloured tiles of size not less than 300x450x7 mm thickon vertical surfaces such as wall ,dado,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tile over and including 10 mm thick backing coat on fair faces of brick work in CM 1:4 complete all as specified 9 Item No 08 : M&L for non skidceramic colouredtiles 7mm to 8mm thick (square/rectangular)of size 400x400mm in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match with colour of tileincluding 15 mm thick screed bed or bedding layer in cement mortar 1: 6 complete all as specified 10 Item No 09 : M&L for non skidceramic colouredtiles 7mm to 8mm thick (square/rectangular)of size 300x300mm in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match with colour of tileincluding 15mm thick screed bed or bedding layer in cement mortar 1: 6 complete all as specified 11 Item No 10 : M&Lfor machine cut kota stone slab inflooring 18-20 mm thick laid over and including 20mm thick screed bed in cement mortar1:6 and pointed withcement mixed with pigment to match with the shade of slab including rubbing and polishing complete all as specified 12 Item No 11 : All as per item No 10above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar 1:4 on wall complete all as specified 13 Item No 12 : M&Lfor 18- 20 mm thickGranite slab work (table rubbed and polish) of approved quality ofrequired sizein floor,wall,cooking platform and like beddedand jointed in greycement slurry and pointed with coloured cement (1:2) usig marble dustwith admixture of pigment to match the shade of granite stonelaid over and including 20 mm thick screed bed in cement mortar 1:6including polishingby using mechanical grindercomplete allas specified anddirected. 14 Item No 13 : M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor, etccomplete all as specified and directed 15 Item No 14 : M&Lfor 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colourconferming to IS 15658-2006 andincluding joints filled with sandcomplete all as specified and as directed. 16 Item No 15 : M&L for Sand filling under floors or in foundations including watering and consolidation 17 Item No 16 : M&Lfor chequered cement concrete tiles with grey cementand pigment of size 20cmX20cmX25 mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 20 mm thick screed bed in CM 1:6complete all as specified 18 Item No 17 : M&Lfor chequered cement concrete tiles with grey cementand pigment of size 40cmX40cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 20 mm thick screed bed in CM 1:6complete all as specified 19 Item No 18 : Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as directed. 20 Item No 19 : M & L 25mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded aggregate) for levelling course in floors complete all as specified anddirected. 21 Item No 20 : Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified 22 Item No 21 : S&F PVC false Ceiling incldingframe workfor fixing ofPVC false ceiling. PVC false ceiling shallconsist of hollow profile PVC sheets witha thickness of 8 mm to 10 mm fixed on framewith 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finishCeiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. Note: Placing of false ceilling is to be carried out upto 5.00m height in Classrooms.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 23 Item No 22 : S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre inc grid and fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finishCeiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed. Note: Placing of false ceilling is to be carried out upto 5.00m height in Classrooms.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 24 Item No 23 : S&F for anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.Note:Ceilingis to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc as required. 25 Item No 24 : M&L for Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified. 26 Item No 25 : M&L for Exposed metal frame ceiling with 6mm Semi perforatedcalcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified. 27 Item No 26 : M&L for Solid PVC Wall Lining consisting of 5mm thick wood grain printedPVC sheet inclusive of solvent cement and fixing at site on PVC frame workconsisting of 5mm thick PVC sheet fillet of width 35mmfixingonwall @ 30 cm c/c horizently as well as verticallyto make PVC Frame as per specification , complete all as per manufacturer instruction. 28 Item No 27 : Demolition of brickwork built in cement mortar or cement lime mortar including all quoins arches pillars etc complete all as specified and directed. 29 Item No 28 : M&L for brick work with sub class B bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6., etc complete all as specified and directed. 30 Item No 29 : M & Lfor brick work with sub class B bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified anddirected. 31 Item No 30 : Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water,etc. complete removal of debris outside MD land. 32 Item No 31 : M&L for Complete removal of old treatment on internal/External surfaces of wall & celling by scrapping and washing etc by Mechanical means completeall as specified.Note : Scraping/Removing is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site. 33 Item No 32 : M&L for rendering 15mm thick cement plaster in CM 1:6 onfair faces of brick /stonework or concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed. 34 Item No 33 : M&L for rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick/stone or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and fair without using extra cement complete all as specified anddirected.(Note:- Liquid water proofing compound to be measured paid separately) Note: Placing of false ceilling is to be carried out upto 5.00m height in Classrooms.The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 35 Item No 34 : M&L for rendering 5 mm thick in ceiling CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. Notes- Plaster height upto9.0 mtr 36 Item No 35 : Supply only liquid water proofing Compound and applying@ 200ml per beg of cement complete all as specifed and directed. 37 Item No 36 : M&L for preparing Old plastered surface of walls and applying two coat of oil bound distemper white or any tint etc complete as specified and directed 38 Item No 37 : M&L for preparing Old plastered surface of walls and applying one coat of oil bond distemper white or any tint etc complete as specified and directed 39 Item No 38 : M&L for preparing new plastered surface of walls and applying Two coat of oil bond distemper white or any tint etc over and includinga coat of chalk whitening as primimg coat ,complete as specified and directed 40 Item No 39 : Material & Labour for preparation of old plaster surfaces to external wall by providing water proofing treatment by applying one base coat of Raincoat With Dr FIXIT or equivalant over and including a coat of Prime Seal primer (Dr FIXIT) including plastering if required and making the surface fit for application of exterior waether proof water base emulsion paint complete all as directed and specified. Note:Treatment is to be carried out upto 15.00m height over Chhajja/Wall/Roof .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site. 41 Item No 40 : M&L for preparation of plaster/Putty surface of Brick/stone walls and applying a priming coat of exterior weather proof primer applied Min @ 2.20 kg/10 sqm on External walls by spray and finished the surface even and smoothcompleteall as specified and directed. Note:(1) Painting is to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc as required.(2) Primig coat should be done as per manufacturer reqmt of weather proof paint. 42 Item No 41 : M&L for two coats of Exterior weather proof acrylic Emulsion paint (Two or more coat applied @ 1.67 ltr/10 sqm) using roller/spray and make the surface smooth all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge Note:- putty shall be measured separately & Periodicalis to be carried out upto 15.00m height .The contractor is advised to visit the site before quoting the tender.The rate quoted by contractor will deemned to be inclusive of necessary sacffolding work etc required at site 43 Item No 42 : Finishing wall with texture interior paint of required shade on external old/new wall (Two or more coats applied @ 3.28 ltr/10 sqm) surface over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm all as specified and directed by Engr in charge. 44 Item No 43 : M&L for preparation of newly plastered surface of wall and and applying2 mm thickwall careputty in two coats(each coat not less than 1mm thick )and surface finished even and smooth with sand paper completeall as specified 45 Item No 44 : M&L two coats of white washing on newly plastered / concrete celling sufaces incuding preparation of surfaces. Note :- (a) The contractor is advised to visit the site before quoting the tender. (b) The rate quoted by contractor will deemned to be inclusive of necessary arrangement work etc required at site. 46 Item No 45 : Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each. 47 Item No 46 : Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each. 48 Item No 47 : Taking down shutters of any description exc 1 Sqm and n.exc 2Sqm each . 49 Item No 48 : S & F Second class hard wood plain, solid, straight chawkats and frames, wrought, framed rabated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as directed and specified. 50 Item No 49 :S& F for Pressed steel frames size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed 51 Item No 50 : S& F for Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed 52 Item No 51 : M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed. 53 Item No 52 : S&F35 mm thick second class hard woodplain framed factory made panelled shutter with lock rail and panel of 12 mm BWP commerical ply . The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. 54 Item No 53 : S & F 35mm thick, second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and as directed. 55 Item No 54 : M&L for preparation of new wooden surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer, transparent, and bringing forward surfaces to smooth even finish, comlete,all as specified 56 Item No 55 : M&L for Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified and as directed. 57 Item No 56 : S&F For 375 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate andtwo on staple plate and fixed 58 Item No 57 : S&F for 300 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 59 Item No 58 : S&F for 150 mm Cast iron or malleable cast iron handles, cast type, stove enamelled black 60 Item No 59 : S&F for 150 mm Butt hinges, heavy weight, cold rolled mildsteel, and fixed 61 Item No 60 : S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy. 62 Item No 61 : S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified . 63 Item No 62 : S&F Extruded aluminium alloy handles fabricated type anodised 150mm size complete all as directed and specified. 64 Item No 63 : M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified 65 Item No 64 : S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. 66 Item No 65 : Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick all as specified and as directed. 67 Item No 66 : S & F in repair curtain rails 20 mm dia, decorative type, stainless steel including fixing brackets in both sides fancy type complete all as specified and directed.. 68 Item No 67 : S&F powder coated aluminium frame work as in door shutter, windows , ventilators, partitions with one or more rebates sections of approved tint as required for partitions including beading, cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/ beams etccomplete all as specified 69 Item No 68 : S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be oftwo parts and upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed.(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. 70 Item No 69 : S & F powder coated aluminium ventilator of frame having cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. 71 Item No 70 : S&F in repairpower coatedaluminium door shutters, aluminium section weighing min weight 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. . 72 Item No 71 : S&F 4.8 mm thick plain or Frosted glass, ordinary quality including rubber gasket for packing and fixed to uPVC/ aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed. 73 Item No 72 : M&L for 3mm thick Aluminium Composite Panels (ACP) any colour offor fixing in Alumimium door/partition//Wall Lining/Ceiling with all other necessary accessories for fixing complete all as specified and directed. 74 Item No 73 : S & Fstainless steel wire cloth of0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed. 75 Item No 74 : S&F aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed. 76 Item No 75 : S&F Framed work such as grills, gratings, guard bars for windows, and ventilators,barred iron work, ladders, framework of water tanks and similar work. 77 Item No 76 : S&F factory made 30 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cum, an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free, water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including necessary Locking arrangement complete all as specified and as directed.Note-:(a)Colour/Texture Style of Door/Prelam Sheet shall be approved by GE (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site. 78 Item No 77 : S&F factory made 100% solid WPC (Wood polymer composite) Door frame 65mm X 100mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/borer proof, water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length, all as per specifications drawings as directed. 79 Item No 78 : S&F Veneered decorative 4mm mm plywood, grade 1 (with BWR resin) with decorative laminate min 1mm thick on both faces, fixed with screws to timber frame work as in cupboard shelf/partition including taking down the existing structure / board on site all as specified . 80 Item No 79 : S&F for 18 mm thick factory made PVC sheet (having density not less than 450 Kg/Cum) one side pre-laminated sheet as inktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed. 81 Item No 80 : S & F for factory made PVC shelf/partition of required size consisting of panel of18 mm thick ofrequired size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as specified. 82 Item No 81 : S&F stainless steel shelf closing hinges 75 mm size for PVC door shutters complete all as specified and directed 83 Item No 82 : S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed . 84 Item No 83 : S& F 100 mm size MS mat/glossy finish handle complete all as specfied and directed . 85 Item No 84 : Taking up or down steel tubing and connections for bore of tube 15 mm, complete all as specified and directed. 86 Item No 85 : Taking up or down steel tubing and connections for bore of tube 20 mm, complete all as specified and directed. 87 Item No 86 : S& F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position all as specified in SSR part Icomplete all as specified and as directed. 88 Item No 87 : S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 500Ltrsincl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float complete all as specified. 89 Item No 88 :S&F 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors inc all fittings complete all as specified. 90 Item No 89 : All as per item no 88 above but 20mm bore complete all as specified and as directed. 91 Item No 90 : Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in positionexc 500 & n. exc 1000 litres capacity 92 Item No 91 : S&F in repair CP pillar taps(swan neck type) cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specifiedand directed 93 Item No 92 : S&F fancy typeCP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified. 94 Item No 93 : S&F fancy type chromium plated15mm boretwo way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed. 95 Item No 94 : S & F CP toilet paper holder complete all as specified and as directed. 96 Item No 95 : S&Fvitreous china wash down water closet pedestalpattern white excluding flushing cistern and flush pipes complete all as specified and as directed . 97 Item No 96 : S&FPVCvalve less,syphonic action type flushing cistern,low level, white with inlet ball valve,float and handle including flush pipe, bracketsand connection to pipe and fixing of chainand pull or lever if any complete all as specified and directed. 98 Item No 97 : S&F Health faucetmild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified 99 Item No 98 : S&F in repair vitreous china wash hand basin, Oval counter top of size 630 x 500 mm with all fittings and fixture complete including brass coupling 32 mm etc. (Cat No- 10045 Pastel ofMake : Hindware or equvalent for oval type wash hand basin ) 100 Item No 99 : S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete.. Note :- Pillar tape shall be measured as supply only under respective item 101 Item No 100 : S&F in repairsvitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, CP urinal spreader with waste pipe and all fiting for urinal.complete all as specified and as directed 102 Item No 101 : S & F PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed. 103 Item No 102 : S&F 600x450mm beveled edge mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer ccomplete all as specified and directed. 104 Item No 103 : S&F PVC connection15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed. 105 Item No 104 : S&F for 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed 106 Item No 105 : S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. 107 Item No 106 : S & F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. 108 Item No 107 : S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. 109 Item No 108 : S & F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. 110 Item No 109 : S& F 32 mm brass chromium platedBottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and caps and fixed,complete all as specified and directed. 111 Item No 110 : S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 20mm-210 gms) complete all as specified and as directed 112 Item No 111 : Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings etc complete all as specified 113 Item No 112 : Dismantling of timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in un-framed work complete all as specified 114 Item No 113 : S&F 0.50mm thick (including coated thickness) pre-colourpre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa asin roof sheeting / sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. 115 Item No 114 : S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall Ridge/Valley gutter fixed with self tapping screws as specified 116 Item No 115 : M&L infor MS steel Hollow Sectionwork in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 andIS-1161-1979 grade ST-240 complete all as specified and as directed. 117 Item No 116 : S&F mild steel hollow ,Joist, channel, angle,tee or tubular Sectionwork in tubular trusses, purlins, rafter, tubular column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 andIS-1161-1979 grade ST-240 complete all as specified . 118 Item No 117 : Preparation of newlysteel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed 119 Item No 118 : M&L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (horizontal or sloping)etc rough finished surface of concrete complete all as specified 120 Item No 119 : M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, etc complete all as specified 121 Item No 120 : M&L for RCC M-25 grade concrete (Nominal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, etc complete all as specified.NOTE: Reinforcement shall be measured and paid separately under relevant item. 122 Item No 121 : Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removingdebris to a distance exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed 123 Item No 122 : M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed 124 Item No 123 : M & F forAPP based polymeric membrane having minimum weighing 3.8 to 4 kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application andincluding applying two coat of bituminous based aluminium paint over APP based polymeric membrane @ 0.20 Kg per Sqm in two coats,complete all as specified 125 Item No 124 : M&L for 10 mm thick rendering in CM 1:3 with WPC @ 3% on fair faces of brick work or concrete surface finished even & smooth without using extra cement (Note : WPC to be paid seprately) complete all as specified and directed. 126 Item No 125 : Supply only liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved. 127 Item No 126 : M & L for preparation of surfaces and applying bituminous basedprimer (conforming to IS-3384-1965) @ 0.30 Kg/Sqmtill the roof surfaces is properlyintregnated ,complete all as specified and as directed. 128 Item No 127 : Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made 129 Item No 128 : Taking down and refixing shutters(of any description and any size ) in same opening ,complete removal of old treatment ,finish the surface withone coat of primer and 2 coat of PU spray paint ,fixing in same opening complete all as specified and directed 130 Item No 129 : S&F 12 mm thick frosted toughned glass door shutter inc with fixed on patch hinges/pivot for smooth functioning in door shutter inc stainless steel handle of 8 inches long anfd mortice locking arrangement complete all as specified and directed 131 Item No 130 : Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed 132 Item No 131 : M&L 100mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed 133 Item No 132 : S&F 100mm dia CI bend with oval access door (any radius) diminishing pieces or tapers as required complete all as specified and directed 134 Item No 133 : M&L 75mm dia cast iron soil, waste and vent pipe spun pipes any length with or without ears with cement joints fixed to walls or laid in trenches complete all as specified and directed 135 Item No 134 : S&F 75mm dia CI bend with oval access door (any radius) diminishing pieces or tapers as required complete all as specified and directed 136 Item No 135 : S&F Cast iron cowls 75mm complete all as specified and directed 137 Item No 136 : M&L for two coat of painting with Dr Fixit fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed. 138 Item No 137 : Grinding and mirror polishing of oldkota stone flooring /marble flooring includingwax complete all as specified and directed. 139 Item No 138 : Providing Factory Made 18mm thick 100% Solid CNC CUT WPC ( Wood polymer Composite ) Plain Jali of required size & approved design, comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction. 140 Item No 139 : Taking down and refixing of 75 mm CI pipe(any size ) in same openingcomplete removal cleaning, finish the surface, fixing in same opening Inc all fittings complete all as specified and directed 141 Item No 140 : Taking down and refixing of 100 mm CI pipe(any size ) in same opening, complete removal cleaning, finish the surface ,fixing in same opening complete all as specified and directed 142 Item No 141 : Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc. 143 Item No 142 : Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan bladesand deposit to MES store yard of AGE E/Mcomplete all as specified and as directed. 144 Item No 143 : Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. 145 Item No 144 : Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site. 146 Item No 145 : Taking down Serviceable LED fitting of any typeafter disconnecting all necessary electrical connections from ceiling roseand deposit to MES store yard of AGE E/Mand after completion of work same Servicable LED fitting will be fitted on same location complete all as specified and as directed. 147 Item No 146 : Labour only for refixing the celing fan/ Wall fan/ Exhaust fan obtained from item No 2 above with replacement of unsv3 corePVC insulatedPVC sheated 3 core multistrandedcopper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed. 148 Item No 147 : M&L for removing carefully window/Split AC and depositing to MES store yard/depositing to user concerned as directed at site and refixing to the same location after all cementing and plastering work of building incl re-connection of copper refrigerant piping, filling of refrigerant gas, making it functional to achieve cooling parameters all as specified and directed. Note : Amount for addl Refrigerant copper piping shall deemed to be included in the quoted rate.The rate also inclusive of making the ACs functional with OEM staff for full satisfaction of Engr in charge and user concerned. 149 Item No 148 : M & L for Point wiring using approved colour coding as as per IS in repairs with FR-LSHPVC insulated PVC unsheathed electriccable 1100V grade ISI 694 marked down through single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR-LSH PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet/Modular Boxesfor mounting switches, sockets, fan regulators etc for the following 150 (a) One light point/fan/ Bell point controlled by one switch 151 (b) One 5amps socket out let point controlled by one switch on same board with other switches. 152 (c) One 5amps socket out let point on independent board controlled by one switch. 153 Item No 149 : All as per item No- 148 here in before but using FRPVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FRPVC insulated cable for 15 amps socket point on independent board controlled by one switch. 154 Item No 150 : M & L for Point wiringusing approved colour coding as as per ISin repairs with FR LSH PVC insulated and unsheathed electric cable 1100 volts grade single core having multistranded copper conductor of 1.5 Sqmm nominal cross sectional area for phase & neutral, drawn in and including non metallic rigid PVC Conduit Pipe /casing caping not less than 25mm base size with all fitting and fixing accessories and with 1.5 Sqmm green FR LSPVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor connected to earth dolly by providing suitable lugs including galvanised/wooden boxes of suitable size with white laminated bakelite sheet/Modular Boxes for mounting switches,sockets etc complete for the followings. 155 (a) One light/ fan/ bell point controlled by one switch 156 (b)One 5amps socket out let point controlled by one switch on same board with other switches. 157 (c) One 5amps socket out let point on independent board controlled by one switch. 158 Item No 151 : All as per item No -150 here in before but using FR LS insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green FR LS PVC insulated cable for 15 amps socket point on independent board controlled by one switch. 159 Item No 152 : Description all as per item No 150here in before butusing 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC point) 160 Item No 153 : Supply and fix in repairs Modular Switchflush type 6 Amps single pole, one waycomplete including taking down the existing all as specified. 161 Item No 154 : Supply and fix in repairs Modular Socket outlet, multi purpose, 2/3 Pin combined 6 Amps flush typecomplete including taking down the existing all as specified. 162 Item No 155 : Supply and fix in repairs ModularBell push flush type,6 Ampscomplete all as specified. 163 Item No 156 : Supply and fixin repairs Modular Socket outlet, multi purpose, 2/3 pin combined 16 Amps universal socketcomplete including taking down the existing all as specified. 164 Item No 157 : Supply and fixin repairs ModularSwitch 16 Amps single pole, one waycomplete including taking down the existing all as specified. 165 Item No 158 : Suply and fixfor Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed 166 Item No 159 : S & F for for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified. 167 Item No 160 : S & F for Ceiling rose, surface Bakelite suitable ISImarked for batten fitting complete all as specified 168 Item No 161 : S & F for Inverter type LED 9 watt LED lamp, complete all as specified and directed. Make : Philips/ Bajaj/ Crompton 169 Item No 162 : S & FEnergy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation andnecessary mounting arrangements , provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. 170 Item No 163 : S&F in repairs LED Decorative wall mounting light fitting 10W recess mounting type, complete incl LED Lamp 10 W, duly connection with coppercable etc. 171 Item No 164 : Supply and fix in repairsintegrated LED tube light fitting 1x18/20 Watt, 6000Kcomplete fitting with all accessories duly connection with three core flexible coppercable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. 172 Item No 165 : Supply and fix in repairsintegrated LED tube light fitting 1x9/10 Watt, 6000Kcomplete fitting with all accessories duly connection with three core flexible coppercable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. 173 Item No 166 : S & F for Energy saving new generation Surface / recess mounting LED light fitting luminaire 600MM X600 MM with high power LEDs and electronic driver of capacity 36 watts with pre wired andnecessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting complete all as directed. 174 Item No 167 : S&F in repairs LED round light fitting 15W recess/surface mounting type, white light LED or warm light LED 6500K as per site requirment complete with driver duly connection with coppercable etc.Note :- Ceiling cutout ø 180 mm, height 23 mm ±1 mm for 15 W 175 Item No 168 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm diamedium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. 176 Item No 169 : M & L forSub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sq mm nominal area and drawing intoPVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etc one run of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- four runs of 10 sqmm cable,one run of 10 sqmm cable and one run of PVC conduit will be measured as one unit 177 Item No 170 : M & L forSub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing intoPVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable sizeincluding concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit 178 Item No 171 : Supply and Fixin repairs flush mounting factory made Vertical TPN DB,12wayIP-43 Protection -IK 08,with metal doubledoor with 200 Amps rated copper busbar with 2 neutralbar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing withprovision of sapce for TP/FP 100-125 amps G FrameMCCB as incomer and TP/SP MCBs as out going 12/36 way complete all as specified and directed. 179 Item No 172 : Supply and Fixin repairs flush mounting factory made Vertical TPN DB,8 way IP-43 Protection -IK 08,with metal doubledoor with 200 Amps rated copper busbar with 2 neutralbar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing withprovision of sapce for TPN 63 ampsMCB as incomer and TP/SP MCBs as out going 8 way complete all as specified and directed. 180 Item No 173 : Supply and fixin repairs double door TPN DBs four wayof powder coated DBs suitable for MCBs fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed. 181 Item No 174 : S & F for sheet metal enclosure MCBDBSPN12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 182 Item No 175 : S & F for sheet metal enclosure MCBDBSPN8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 183 Item No 176 : S & F for metal clad box suitable for 230 volt 50 Hz for AC connection three pin and socketwith MCB SP 20/32 Ampsincluding removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed 184 Item No 177 : S & F MCCB 415volts 25 KA suitable for fixing on DB of capacity 100-125Amps with extended terminals complete all as specified. 185 Item No 178 : S & FforMCB tripple pole and neutral rated capacity 63 A, 415V breaking capacity 10 KA complete all as specified and as directed. 186 Item No 179 : S & F for MCB Single pole and neutral rated capacity 5 to 32 A, 240 V breaking capacity 10 KA complete all as specified and as directed. 187 Item No 180 : S & Ffor MCB Single pole rated capacity 5 to 32 Amps, 240 V breaking capacity 10 KA complete all as specified and as directed. 188 Item No 181 : Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed.(Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be includedin overall rate quoted) 189 Item No 182 : S&F fix fresh Air fan,metal body AC single phase, 230 V of size 300 mm sweep ventil air DSP green type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windowsincluding provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and includingmaking suitable size ofhole to existing brick wall for mountingfan baseand making good the same as per existing compelte all as specified 190 Item No 183 : S&F fix fresh Air fan,steel body AC single phase, 230 V of size 450 mm sweepcomplete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windowsincluding provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan forconnection and includingmaking suitable size ofhole to existing brick wall for mountingfan baseand making good the same as per existing compelte all as specified 191 Item No 184 : S&F brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), suitable length ofdown rods, with remote control and accessories , 230 V, 50 Hz, 1200 mm sweep, Minimum air delivery 210 CFM with service value greater than 6.00 BEE, Five star ratedincluding providing electrical connection from ceiling rose to fan terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. 192 Item No 185 : S&F Wall mounting fan of sweep fans complete with fixingaccessories , 230 V, 50 Hz, 1400 mm sweep, including providing electrical connection from ceiling rose to fan terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. 193 Item No 186 : S&F GI perforated Cable trayof size 50 mm casing fittings incl base trench and cover complete with fixingaccessories on surface of wall including laying ofelectrical and comunication/ telephonic cable terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. 194 Item No 187 : S&F GI perforated Cable trayof size 100 mm casing fittings incl base trench and cover complete with fixingaccessories on surface of wall including laying ofelectrical and comunication/ telephonic cable terminal and write down MES Number on fan by black paint/Marker complete all as specified and directed. 195 Item No 188 : S & F for PVC non-metallic rigid Cable /Lan wire Ducts/Wiring Channels/Cable Tray PVC FRLS Type Standard Slot 45MM X 45MM(Height X Width ) A Type LockLAN wire Duct ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 45MM X 45MM(Height X Width ) for LAN, telephone and includingany damage /cutting, chasses and makinggooddisturbed surface to match with existing finish with plaster complete all as specified and directed. 196 Item No 189 : Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in soft / loose soil for laying /taking out ofLT UG cable complete all as specified and directed. 197 Item No 190 : Returning, fillingin including necessary spreading, leveling , wateringand well ramming in layers not exc 25 cm thick in soils. 198 Item No 191 : Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point. 199 Item No 192 : Supply and laying well burnt Bricks , locally available best quality (sub class B bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified. 200 Item No 193 : Supply , spreadand filling approved sand in cable trenches for cushioning of LT UG cable all as specified.NOTE :- Punned thickness only will be measured and paid. 201 Item No 194 : Supply and LayingLT UG cable of size 3.5core x 35 sq mm laid in trenches /floors/on wall /service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal /cable gland as per site requirement including necessary connecting to the main switches /cut outs MCB/MCCBwith necessary lugs after cutting to required length of cable complete all as specified and directed . 202 Item No 195 : Supply & lay GI tubinglight grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore complete all as specified anddirected . 203 Item No 196 : Supply, installation, testing and commissioning out door typeLT panel board ,made out of 3.15mm thick CRCA sheet , factory made, CPRI Approved, cubical type,with slantingtop at leaset 10 Cm projection all around, fedder pillar type,fabricatedwith 50x50x6mm angle iron frame workwith independent door for each feeder,busbar chamber cable tray on both side fully compartmentlized design, double door type & commen openable hinged door from rear side, floor mounting type, busbars made of aluminiumduly insulated with heat retardent fire proof (HRFR) heat shrinkable sleeves of relevant colours.Bus bar shell be properly supported/mounted on epoxy insulators.All live parts and joints shall be insulated with (HRFR) shrouds, conforming to IS, including provn for connecting suitableearth strips,painting with one coat of anti corrosive coating and finally epoxy polyester powder coating of flint Grey shade (RAL-7032),Confirming to IP 54 protection and confirming relavent IS, comprising the adequate arrangement to supply & fix the following accessories,including connecting cable glands and cable lugs,fixing of earth lead to earth terminal of panel including necessary excavation & PCC foundation complete all as specified & Directed.( Note:- Cost of all accessories are deemed to be included in the rate quoted). 204 Incoming (a) Aluminium bus bar - 400 Amps rating - 04 Nos. for phases and neutral 205 (b) MCCB 4 pole 250 Amps, 415 volt, 36 KA - 01 No ( incoming) 206 (c)3 phase Voltmeter (0-500V) digital type with selector switch-01 No 207 (d)3 phase Ammeter (0-400 Amps) digital type with CTs of suitable ratio and selector switch - 01 No. 208 (e) ON/OFFLED type indication lamp with toggle switch - Set of 03 209 Out going:-(a)MCCB 3 pole 100 Amp, 415 volt, 25 KA - 03 Nos 210 (b) MCB SPN 32Amp, - 04 Nos 211 Item No 197 : M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 212 SCHEDULE A(Schedule of credit )Schedule of Credit Rs 284047.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount)
Contract Date: Feb 11, 2026 Contract Value : ₹ 2.23 Crore
Statutory Bodies & Commissions/Committees No of Bidders 8
Madhya Pradesh View Result →
30.
Housing Urban and Rular Development #9502542 Technical Bid
Tender For Electrical Work At Thdc Singrauli . - INTERNAL WIRING 2 Point wiring in PVC conduit, with modular type switch :- 3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 4 Group C 5 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. 6 Group C 7 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 8 Power plug wiring in PVC conduit (2 x 4 Sq.Mm.) :- 9 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 10 Circuit / Sub main wiring in PVC conduit :- 11 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 12 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. 13 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. 14 2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire 15 4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire 16 S/F light plug point Modular Type Accessories :- 17 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 18 S/F power plug point modular Type Accessories :- 19 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 20 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, C curve including connections, painting etc. as required. 21 DISTRIBUTION BOARDS & MCBs 22 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 23 Single pole 24 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 25 Supplying and Fixing Following way, Horizontal Type Three Pole and Neutral, Sheet Steel, MCB Distribution Board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 26 6 Way (4 + 18), Double Door 27 8 Way (4 + 24), Double Door 28 Supplying and fixing following way, Single Pole and Neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 29 8 way , Double door 30 12 way , Double door 31 S/F DP MCB Isolator 32 Supplying and fixing following Rating, Double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 33 40 Amps 34 S/F 4P MCB Isolator 35 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 36 63 Amps 37 S/F DP (RCCB) 38 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as Required. 39 40 Amps 40 TELEPHONE, TELEVISION & DATA SYSTEM (socket,wiring & conduting only) 41 S/F MODULAR BOXES, BASE & COVER PLATE :- 42 Supplying and Fixing Following Size/ Modules, GI Box Alongwith Modular Base & Cover Plate for Modular Switches in Recess etc. as Required. 43 1 or 2 Module (75 mm x 75 mm) 44 S/F MODULAR TYPE SWITCH / SOCKET :- 45 Supplying and Fixing Following Modular Switch/ Socket on The Existing Modular plate & Switch Box including connections But Excluding Modular Plate etc. as required. 46 Telephone Socket outlet. 47 TV Antenna socket outlet. 48 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 49 25 mm. 50 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, Unarmored Telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 51 2 Pair 52 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 53 Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 54 1 run of cable 55 LIGHTINGFIXTURESANDFANS 56 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 57 Installation, testing and commissioning of pre-wired, fluorescent fitting /compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as Required. 58 Installation of Exhaust fan in the existing opening, including making good the damage, Connection, Testing, Commissioning etc. as Required. 59 Upto 450 mm sweep 60 Fixing Louvers / Shutters for Exhaust Fan: 61 Extra for Fixing the Louvers/ Shutters Complete with Frame for a Exhaust Fan of all sizes. 62 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing 63 CABLE & ACCESSORIES 64 LT CABLE LAYING 65 Laying of One Number PVC Insulated And PVC Sheathed / XLPE Power Cable of 1.1 kV Grade of Following Size Direct in Ground Including Excavation, Sand Cushioning, Protective Covering and Refilling the Trench etc. as required. 66 Upto 35 sq. mm 67 Above 35 sq. mm and upto 95 sq. mm 68 Above 95 sq. mm and upto 185 sq. mm 69 Above 185 sq. mm and upto 400 sq. mm 70 LT CABLE JOINTING & END TERMINATION 71 Supplying and Making End Termination With Brass Compression Gland and Aluminium lugs for Following Size of PVC Insulated and PVC Sheathed / XLPE Aluminium Conductor Cable of 1.1 kV Grade as Required. 72 3½ X 25 sq. mm (28mm) 73 3½ X 35 sq. mm (32mm) 74 3½ X 50 sq. mm (35mm) 75 3½ X 95 sq. mm (45mm) 76 3½ X 120 sq. mm (45mm) 77 3½ X 150 sq. mm (50mm) 78 3½ X 185 sq. mm (57mm) 79 3½ X 240 sq. mm (62mm) 80 MISCELLANEOUS ITEMS 81 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 82 EARTHING 83 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. 84 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.. (NEUTRAL EARTHING) 85 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 86 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 87 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 88 11KV HT Board, 250 KVA Transformer, 200 KVA DG Set, HT Cable & Accessories 89 H V CABLE LAYING 90 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 91 Above 120 sq. mm and upto 400 sq. mm 92 Supply and making Indoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required. 93 3 C x 240 Sq.mm 94 Supply and making Outdoor cable end jointing with cast resin compund, including lugs and other jointing materials for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required. 95 3 C x 240 Sq.mm 96 Supply and Making Straight Through Cable Jointing With Cast Resin Compund, Including Ferrule & Other Jointing Materials for Following Size of 3 core, XLPE Aluminium conductor cable of 11KV grade as required. 97 3 C x 240 Sq.mm 98 RCC Hume pipes 99 Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100 250 mm dia 101 300 mm dia 102 100 mm dia 103 Manholes 104 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 105 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 106 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 107 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 108 HDPE PIPES 109 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 110 200 mm dia (OD-200 mm & ID-175 mm nominal) 111 CABLE TRAYS 112 Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Cable Tray Bends as per Requirement) 113 150 mm width X 50 mm depth X 1.6 mm thickness 114 300 mm width X 50 mm depth X 1.6 mm thickness 115 450 mm width X 50 mm depth X 2.0 mm thickness 116 600 mm width X 50 mm depth X 2.0 mm thickness 117 EXTERNAL LIGHTING 118 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. 119 Above 4.5 metre and upto 6.5 metre 120 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape , Hole Seeling to be done complete as required. 121 32 mm dia 122 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering. 123 Upto 35 sq. mm 124 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. 125 Upto 35 sq. mm 126 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 127 3 core 2.5 sq.mm (for6/4 Mtr Poles) 128 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 129 63 mm dia (OD-63 mm & ID-51 mm nominal) 130 TELEPHONE, TELEVISION & DATA SYSTEM (socket,wiring & conduting only) 131 Supplying & Fixing Modular Type Computer jack RJ 45 ISI mark 1 Module on existing Mounting plate and box Complete with all accessories as required. 132 Light Fixtures and Fans 133 Supply of 40W LED Recessed Light Fixture Aesthetically designed 2x2 LED Flat panel light which provides soft-light and glare free symmetrical illumination complete with all accessories as required. 134 Supply of Surface Mounted Energy Efficient, LED Luminaires 12W LED DOWN LIGHT (Round/Square) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc as required. 135 Supply of Recess Mounted Energy Efficient, LED Luminaires 12W LED DOWN LIGHT (Round/Square) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc as required. 136 Supply of Recess Mounted Energy Efficient, LED Luminaires18W LED DOWN LIGHT (Round/Square) Sutaible for 220v Single Phase Supply complete with driver circuit including making connections etc as required. 137 Supply, of Linear & Compact 10W Mirror Light with Decorative Grey Caps, Polycarbonate Body & Ribbed Opal Diffuser. 138 Supply of LED LuminairesBATTEN20W LED Tube Light of Box Type Prewired Indoor Luminairewith Energy Efficient Electronic Ballast, with End Caps Complete as Required. 139 Supply of Bulk Head Luminaire, heat resistant Glass cover suitable for 10W to 15W LED complete as Required. 140 Supply of Following sweep exhaust fan with guard suitable operation on single phase 230 V, 50Hz. AC Supply, with lowers /shutters in the existing opening. 141 300 mm Sweep 900 rpm 142 Supply & Fixing of 400mm Wall Mounted Fan with all accesseries as required complete for installation. 143 DISTRIBUTION PANELS 144 MAIN LT PANEL 145 NOTE:- MCCBs Wherever Specified shall have Rotary Handle. 146 Suppy , installation, testing, Design, manufacture, supply inspection, handling, assembling, affecting proper connections, testing and commissioningof2mm CRCA sheet steel fabricated cubical type Main L.T. Panel (Totally Type Test Assembled - TTA) floor mounting, dust & vermin proof, front operatedconstruction, enclosure class - IP 52,As per IEC 61439 after proper treatment with 9 tank process with top/bottomremovable gland plates, as required, double compression type cableglands,earth bus, hinged and lockable doorsto achieve dust and vermin proofcomplete with all inter connectionssmall wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc.The panel feeders shall be suitable for terminating suitable nos. 3.5 / 4 core armoured aluminium cable as required. Panel Should Be Internal Arc tested at 50ka for .3 sec as per IEC61641. 147 (Under no case temperature of main LT panel shall be more at any point of the panel. To avoid heating necessary exhaust fans shall have to be provided along with top louvers). 148 Degree of protection IP-42 149 The internal control wiring shall fuse less. All control wiring and metering protection shall be by MCBs. 150 Colour: Siemens Gray Powder Coated or as per approved shade. 151 INCOMER 1 FROM 250 KVA OUTDOOR TRANSFORMER 152 1 Nos. 400 amps four pole MCCB of fault breaking capacity 50 KA (Ics=Icu)fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicator and frame earthing contact ,confiming to IS 13947-21993 as amended upto date complete with following Accessories. 153 1 set of 3 CTs of ratio 400/5A, Class 1.0 accuracy 15 VA burden for APFCR. 154 Independent manual spring closing mechanism - 1 No. 155 Microprocessor release (EMI and EMC certified) for over current, earth fault and short circuit protection - 1Set . 156 Multifunction meter with selector switch with suitable CTs and back up MCBs. 157 3Nos. Phase indicatingLED lamps with 2 Amp backup MCB, breaker ON/OFF/Trip indication light with 2A MCB , test terminal block set, MCB , circuits as per standatd practice , auxiallry contact for positive interlocking of the breakers as required. 158 Shunt trip coil 220 Volt AC. 159 INCOMER FROM DG SET (200 KVA) - 1 Nos 160 1 Nos. 400 amps four pole MCCB of fault breaking capacity 50 KA (Ics=Icu)fitted with interlocked door, automatic safety shutters, mechanical ON/OFF and service/test/isolated position indicator and frame earthing contact ,confiming to IS 13947-21993 as amended upto date complete with following Accessories . 161 1 set of 3 CTs of ratio 400/5A, Class 1.0 162 Independent manual spring closing mechanism - 1 No. 163 Microprocessor release (EMI and EMC certified) for over current, earth fault and short circuit protection- 1Set . 164 Multifunction meter with selector switch with suitable CTs and back up MCBs. 165 Protection releaseswith LSIG and Over voltage ,under voltage,Reverse power protection Relay & Metering & Accessories for each D G set incomers 166 3 Nos. Phase indicatingLED lamps with 2 Amp backup MCB, breaker ON/OFF/Trip indication light with 2A MCB , test terminal block set, MCB , circuits as per standatd practice , auxiallry contact for positive interlocking of the breakers as required . 167 Shunt trip coil 220 Volt AC. 168 1 nos battery charger with DC voltmeter and ammeter suitable for the DG sets (200 KVA) 169 INTERLOCKING 170 Interlocking logic electrical Interlocking betweenincomers and bus coupler and it should have auto start and auto trip facility for Automatic Operation of The Breakers Wit Manual Over Rid Facility 171 BUS COUPLER 172 One Number 400A 50KA 4 poleMCCB as Bus Coupler with ON/OFF Indication. 173 BUS BAR 174 500 A TPN Aluminium bus bar with heat Shrink Sleeve 175 OUTGOINGs 176 All the MCCBs Shall be Equiped/Provided with all accessories & Inbuid protection releas & MCCBs Shall be Thermal Magnetic upto 250A & Above Microprocessor Based with inbuiltO/L & S/C release. 177 1 Nos. 200 AMPSTP MCCB (Capacitor Panel) 178 1 No. 125A 36KA4P MCCB. (Ground Floor Panel) 179 1 No. 125A 36KA4P MCCB. (First Floor Panel) 180 1 No. 125A 36KA4P MCCB. (UPS Panel) 181 1 No. 100A 36KA 4P MCCB (Lift Panel) 182 1 No. 100A 36KA 4P MCCB (Fire Fighting) 183 1 No. 100A 36KA 4P MCCB (Plumbing) 184 1 No. 125A 36KA4P MCCB. (External Lighting) 185 2 No. 125A 36KA4P MCCB (Spare) 186 2 No. 100A 36KA4P MCCB (Spare) 187 Other items such as 188 1 set of control wiring 189 1 Set of designation plates 190 NOTE :- Adequate Quantity of Fire Suppression system with Pneumatic gas cylinder and Heat Sensitive Pneumatic tubing to be used in panel as perthe current fire norms & SURGE PROTECTION DEVICES Type 1 ( Class B), 4 Mode, spar type suitable for 10/350µs surge,3Nos. phase to earth and 1Nos. neutral to earth with impulse Current Iimp. ≥ 50KA Per mode & In ≥ 25kA per Mode. 191 Complete Panel as Above and complete 192 AUTOMATICPOWERFACTORCORRECTIONPANEL(CAPACITOR PANEL) - 90 KVAR- INNOVATION CENTER BLOCK 193 Supplying, Installation, Testing and Commissioning of cubicle type capacitior panel suitable for 415 & 3 phase 50 HZ A.C. supply System fabricated in compartmentalised design from CRCA Sheet Steel of2 mm thick for frame work and cover, 3 mm thick for gland plates i/cpowder coating in approve shade having 500 AMP capacityTPN Aluminium bus bar DMC/SMC bus bar supprot entire pannel should have common Al. earth bar for size 50 mm x 5 mm i/c Providing & fixing following switch gear mounting there on fans,grills for propor ventillation complete with gaskets & inner connection i/c connection with existing CTS in the main CT Panel complete as reqd. The panel board shall be of dust and verm proof with degree of protection IP 42) 194 a) 200 Amps TP MCCB with Microprocessor Based release and E/F proctection with time dely(Ics=100% Icu) - 1 No. 195 b) 250A, 4 strip Tinned Aluminium busbar -1 Set 196 c) Micro processor based automatic Power factor control relay i/c power factor metre in 8 steps 197 d) Multi functional meters with suitable CTS and protection MCBS 1 set. 198 e) 3 Nos. Phase indieating right (lamp) with MCBs protection. 199 OUTGOINGS- 200 1 Set - 63 Amp TP MCB 10 KA and Capacitor duly switching contactor for 20 KVAR capacity auto mannual selector switch start/stop puch button on/off indicatting lamp with protection MCB & delay timer complete i/c 20 KVAR mixed dielectric with 7% detuned filter copper reactor type capacitor bank with inter Connection 201 7 Set - 40 Amp TP MCB 10 KA and Capacitor duly switching contactor for 10 KVAR capacity auto mannual selector switch start/stop puch button on/off indicatting lamp with protection MCB & delay timer complete i/c 10 KVAR mixed dielectric with 7% detuned filter copper reactor type capacitor bank with inter Connection 202 complete panel as above and complete 203 GROUND & FIRST FLOOR PANEL (TYPICAL) 204 SITC of cubicle LT pannel suitable for 415V, 3 phase, 4 wire 50 HZ Ac supply system, fabricated in conmpartmentalized (preferbly) design from CRCA sheet of 2mm thick for frame work and covers, 3mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC/SMC bus bar supports, , bottom base channel of MS section not less than 50mm x 50mm x 5mm thick,entire pannel shall have a common copper earth bar 25mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of AI. bus bars and control wiring with 2.5 sq.mm. FRLS PVC insulated copper conducter S/C cable, cable alleys, cable gland plates in two half. i/c providing following switch gears :- 205 INCOMER : 125 AMP 36KA FP MCCB 206 BUS BAR :160 AMP,500 Volts, 3 phase 50 HZ4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. 207 OUT GOINGS: 208 63 AMP 4P MCB Including 1 no. of Indication Lamp (DBs) - 6 209 63 AMP 4P MCB with1 no. of Indication Lamp (Spare) - 2 210 40 AMP DP MCB with1 no. of Indication Lamp (Spare) - 1 211 complete panel as above and complete 212 UPS PANEL 213 SITC of cubicle LT pannel suitable for 415V, 3 phase, 4 wire 50 HZ Ac supply system, fabricated in conmpartmentalized (preferbly) design from CRCA sheet of 2mm thick for frame work and covers, 3mm thick for gland, plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable Amp capacity extensible type TPN aluminium alloy bus bars of high conductivity, DMC/SMC bus bar supports, , bottom base channel of MS section not less than 50mm x 50mm x 5mm thick,entire pannel shall have a common copper earth bar 25mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of AI. bus bars and control wiring with 2.5 sq.mm. FRLS PVC insulated copper conducter S/C cable, cable alleys, cable gland plates in two half. i/c providing following switch gears :- 214 INCOMER : 160 AMP 25KA FP MCCB (Including BY Pass Switch for 50 KVA UPS) 215 BY PASS Switch for UPS 160 AMP FP- 1 no. 216 BUS BAR :200 AMP,500 Volts, 3 phase 50 HZ4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. 217 OUT GOINGS: 218 63 AMP 4P MCB Including 1 no. of Indication Lamp (DBs) - 7 219 40 AMP DP MCB Including 1 no. of Indication Lamp (DBs) - 2 220 63 AMP 4P MCB Including 1 no. of Indication Lamp - 2 221 100 AMP 4P MCCB Including 1 no. of Indication Lamp - 1 222 63 AMP 4P MCB with1 no. of Indication Lamp (Spare) - 1 223 40 AMP DP MCB with1 no. of Indication Lamp (Spare) - 2 224 complete panel as above and complete 225 LIFT PANEL 226 Design, manufacture, supply, installation, testing and commissioning of cubicle type panel fabricated out ofCRCA sheet steel , floor mounted totally enclosed switchbaord suitable for use of 415 volts , 3 phase, 50 HZ completewith aluminium bus bar and all accessories including supply and fixing of following incoming and outgoing switchgears, Panel Should Have Double Earthing Provision which connected to the nearest earth grid. 227 INCOMER :100 AMP FP MCCB 228 BUS BAR : 125 AMP, 4P high conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 0.8 sq mm / amp. 229 The Maximum allowable temperature for the Bus bar to be restricted to 90 deg C. The temperature rise should be restricted to 45 deg C above ambient temperature. 230 OUT GOINGS: 231 1 No 63 AMP 4P MCB(Lift) 232 1 No 40 AMP DP MCB(Machine Room DB) 233 1 No 40 AMP DP MCB(Spare) 234 1 No 63 AMP 4P MCB(Spare) 235 complete panel as above and complete 236 EXTERNAL LIGHT FEEDER PILLAR 237 Design,Manufacture, Supply, Installation,Testing and CommissioningofPanelFabricated out of 16 SWG CRCA sheet steel,IP 54, wall / floor mounting type with rain canopyThe sheet steel shall undergo minimum 7 tank treatment followed by finishing powder coating of min 60 micron thickness. the board includes415 /240 V electrolitic Aluminium Bus Bar, removable gland plates, cable glands,including connection with outgoing feeders completeinall respect, Panel Should Have Double Earthing Provision Which Connected to the Nearest Earth Grid. 238 INCOMER: 239 1 no. 125A, 25KA 4P MCCB with microprocessor based releases, ON indication, 1 no. multifunction meter (showing all power parameters), with Selector Switch, Matching Cast Resin CTs. + 3 Nos 63A DP MCB For each Phase.with 3 Nos Astronomical Weekly programmabletime switch (SST- 1min) ON Phase for automaitc switching of landscape light fixtures at sun set and sun rise or twilight (auto on/ auto off and auto mode) with manual override faiclity with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site. 240 BUS BAR 241 TPN Aluminium bus bar with heat Shrink Sleeve rated for 125A. 242 OUTGOING 243 18 nos 16A DP MCB 244 2 nos 40A DP MCB 245 1 nos 40A 4P MCB (SPARE) 246 Other items such as 247 1 Set of control wiring 248 1 Set of designation plates 249 All Items complete as above 250 CABLE & ACCESSORIES 251 Supplying of Following Sizes of 1.1 KV Grade MulticoreAluminium Conductor XLPE Power Cable Insulated armoured cable conforming to IS:7098 (Part - I) or as per Relevant IS Code complete with all Amendments etcand should be NABL certified as required. 252 3.5 C X 240 Sq.mm Al. XLPE arm. 253 3.5 C X 185 Sq.mm Al. XLPE arm. 254 3.5 C X 150 Sq.mm Al. XLPE arm. 255 3.5 C X 120 Sq.mm Al. XLPE arm. 256 3.5 C X 95 Sq.mm Al. XLPE arm. 257 3.5 C X 50 Sq.mm Al. XLPE arm. 258 3.5 C X 35 Sq.mm Al. XLPE arm. 259 3.5 C X 25 Sq.mm Al. XLPE arm. 260 MISCELLANEOUS ITEMS 261 SITC of CO2 Fire Extinguishers 4.5 kg capacity complete in all respect ISI : 15683 marked. As per Safety plus extinguisher fire carbondioxide 4.5kg, duly charged, portable and complete as per defence specification (safetyplus SPEC 4.5) 262 UPS 263 UNINTERRUPTED POWER SUPPLY (UPS) - 50 KVA 264 Supply of 50 Kva Online UPS, IGBT UPS(Transformer-less Design). 265 Supply of SMF Batteries (12Volt VRLA, 120 Ah, 28 Numbersto provide 30 Min Backup in total for 50 kva UPS at 0.8PF and ECV=1.7V. 266 Fully rated Inbuilt static switch at the inverter output and 100% rated Inbuilt static switch at the static bypass line integrated in UPS module. 267 Supply of Local Accessories (like Cabling Between UPS and the Battery onsidering Cable Routing ,Battery Interlinks , Battery Rack etc). 268 Backfeed protection at Mains & Bypass (Inbuilt / External). 269 Installation and Commissioning of 50 kVA UPS, Battery and Accessories. 270 Supply , installation , testing and commissioning 160A FP MCCB of25KA breaking Capacity in metal sheet enclosure with ON/OFF, TYB Indication lamps for Incoming of UPSComplete in All Respect as Required. 271 SUB STATION - 11KV HT BOARD, 250 KVA TRANSFORMER, 200 KVA DG SET, HT CABLE & ACCESSORIES 272 11KV SINGLE VCB PANEL BOARD 273 11KV SINGLE PANEL HT VCB (Indoor Type) - ONE INCOMERS CUM OUTGOING 274 Design, Manufacture and Supply of 1 Panel, 11 kV HT VCB Switch Board with Following Accessories : 275 Incoming Cum Outgoing 276 Indoor Type - 630A, 11kV, 350MVA for 3 Sec., TP, Horizontally isolated, horizontally drawout type, motorised spring charged, closing mechanism, motor voltage 230V AC, shunt tripping & Closing coil Voltage 24V DC, Electrically Operated, Trip Free, Dust & Vermin Proof, Vacuum Circuit Breaker (VCB) With Mechanical & Electrical OFF/ON Indicators & Provided with Following -1 No. 277 CT chamber with double wound single phase, cast resin CT, 15VA burden with core-1 for metering (CL-1) and core-2 for protection (CL-5P10) and of 60/5/5A ratio - 3Nos. 278 IDMT relay with 3 elements for over current (50-200%) and 1 element for earth fault protection(10-40%). - 1 Set 279 Anti Pumping Relay - 1 Set. 280 Master Trip Relay - 1 Set. 281 Trip circuit supervision relay - 1 Set. 282 Potential Transformers, 3 Phase, 3 Limb,Drawout Type, Resin Cast 11000/(Root 3)/110/(Root 3) Ratio Class 1 Accuracy, 100 VA Burden, with HV fuse on primary side and MCB/ MPCB on secondary side. - 1 Set 283 6 Windows Annunciator with Hooter - 1 Set 284 1 Window for over current trip - 1 Set 285 1 Window for earth fault trip - 1 Set 286 1 Window for master trip relay - 1 Set 287 1 Window for Emergency Stop Push Button - 1 Set 288 2 Windows Spare - 1 Set 289 Digital Ammeter with inbuilt selector switch - 1 Set 290 Digital Voltmeter with inbuilt selector switch - 1 Set 291 A set of breaker ON/OFF/Trip/DC control supply healthy/Trip circuit healthy/ Spring Charged VCB in test / VCB in service & R,Y,B phase indication lamps. - 1 Set 292 Emergency stop push button -1 Set 293 Limit switches with 6 NO/ 6 NC breaker auxiliary contacts - 1 Set 294 Control:- T-N-C (Trip, Neutral, Close) breaker control switch with indication arrangement. - 1 Set 295 All control wiring with protection & test terminal block as required. - 1 Set 296 Space heater with thermostat for moisture absorption. - 1 Set 297 Suitable for connection to 3C x 240 sq.mm. Cross linked polythelene(XLPE) 11kV cables or as called for. - 1 Set 298 Cable box for 3C x 240 sq.mm 11kV XLPE Al. conductor cable. - 1 Set 299 HT Danger Plate - 2 Set 300 Incoming as described above. 1 Sets 301 Powerpack as Required to Be Included (220V/24V DC), 7AH Battery for Each Breaker Module. 302 SINGLE PANEL 11KV HT VCB PANEL AS DESCRIBED ABOVE 303 11KV TRANSFORMER(11 KV /0.433 KV) (250 KVA) 304 11KV TRANSFORMER(11 KV /433 V) (250 KVA) 305 Supply Installtion, Testing and commissioning of outdoorOil cooled Outdoor Type Transformer11 KV/433 Volt Rating 3 phase, Double Wound with copper Winding.(as per IS : 1180 (part 1) : 2014Level 2 (AMENDMENT 4)/ Equivalent IEC Standard , OLTCin Steps (+10% to -10% @ 1.25%), Insulation Class : Class A , Temperature Rise : 40 Deg.c in Oil , 45 deg.c by Resistance, 50 deg.c by Ambient , Dyn 11 Vector Group and other Standard Accessories as Required Including Followings : 306 PLEASE NOTE THE TRASNFOREMR SHALL BE IN COMPLINACE WITH NEW REGUALTION IS 1180 or Equivalent IEC Standard FOR LOSSES AND EFFICIENCY and ammended upto date 307 Civil work shall be paid extra as per actual. 308 Cable Termination box with disconnecting facility for 11 KV 3C-240 sq mm XLPE cable at 11 KV side 309 ON Load Tap Changer on HV side+10% to -10% @ 1.25%. 310 Standard Fittings , Accessories /Spares :- 311 Rating and Terminal Marking Plate - 1 312 Earthing Terminals - 2 313 Lifting Lugs - 2 314 Drain Valve with Blanking Plate - 1 315 Filter Valve with Blanking Plate - 1 316 Conservator - 1 317 Conservator Oil Filling Hole With Cap - 1 318 Oil Level Indicator with Min. Marking - 1 319 Dehydrating Breather - 1 320 Conservator Drain Plug - 1 321 Air Release Device - 1 322 Pressure Relief Valve - 1 323 Thermometer Pocket - 1 324 Rollers uni directional - 4 325 Radiators Detachable - 4 326 HV Cable Box- 1 327 LT Cable Box - 1 328 Seperate Neutral Terminal - 1 329 ON Load Tap Changer - 1 330 OTI with alarm and trip contacts 331 Buchholz relay with alarm & trip contact 332 Current Transformer 333 Radiator Valve 334 Marshalling Box 335 WTI with alarm & trip contact 336 WTI Pocket 337 Drain Valve with Blanking Plate (OLTC) 338 Filter Valve with Blanking Plate (OLTC) 339 OLTC Surge Relay 340 RTCC Indoor 341 AVR 342 250 KVA (11/433V) AS DESCRIBE ABOVE 343 DIESEL GENERATOR SET - 200 KVA DG SET :- 344 200 KVA DG SET 345 Supply, intastallation, Testing & Commissioning of200 KVA Capacity Radiator cooled DG Set with Suitable StandardAMF Panel & suitable capacity engine directly coupled withalternator for 415 volt, 3 phase, 50 Hz, 4 wire, Generation system complete with accessories, Fuel Oil Tank & Control Panel etc as Required and sound proof acquastic enclosurefor the DG SET (75 db @ 1m) , including supply,fixing of antivibration pads suitable for 200 KVA DG Set as per standards of Engine manufacture, provision of conrol cablefrom engine to control panelto engine. Provision of pipe fuel pipe line of suitable size from fuel tank to engine and over flow pipe engineto fuel tank complete gatevalve and fitting leader maker etc. Supply , Intallation of starting batteries of suitableAH as recommended by manufacterer Heavy duty complete as required at site complete with stand and battery charger residentials silencer sutaible for diesel engine exhaust pipe line complete complete flange, bend, flexible pipe all as required and as directed by Engineer Incharge. 346 Diesel Engine (CPCB-4 NORMS COMPLANT) 4 Stroke, Radiator Cooled, Diesel Engine Model Developing Output Prime 160 KW Having Following Arrangement :- 347 Flywheel With Starter Ring for Generating Set 348 Air Filter , Lube Oil Cooler Assembly with Accessories. 349 Exhaust Air Manifold 350 Exhaust Bellow 351 Fuel Fiter 352 Diesel engine pre heating arrangement 353 Lube Oil Filter 354 Exhaust Gas Turbo Charger with After Coller 355 Day Tank For fuel with Markings 356 ECP Panel mounted on a Separate Frame. 357 Radiator with Pusher Type Fan, With Fan Guard, Coolant Pump. 358 12V Electrical Starting System with Starter Motor and Battery Charging Alternator. 359 Engine Mounting Supports 360 ALTERNATOR Rated at 200 KVA, 415 Volts, 3 Phase, 4 Wire, 0.8 P.F (lag), 50HZ, 1500 RPM, IN Accordance with IS 4722 /IEC 60034 as per following Specification. 361 Rating: Suitable for an over-load of 10% for 1 hour in every 12 hours operation. 362 Voltage Regulation: Provided with Fast Response Thyristor Type Electronic automatic voltage regulator, which holds output voltage within desired limits. (+/- 1%). 363 Excitation: Self Excited - Self Regulated. 364 Alternator Loading: Suitable for Taking Rated load Immediately After Machine Reaches Rated Voltage and Speed. 365 Vibration: Suitable for Direct Coupling with Engine and Mounted on Common M.S. Channel Base Frame. 366 Enclosure: Screen protected drip proof enclosure with IP – 23 degree of protection. 367 Cooling: Air Cooled type with radial fan mounted on Rotor. 368 Winding and Insulation: Insulation class H as defined in IEC – 60034-1 369 ACCESSORIES :- 370 MS Base Frame Suitable for Mounting of the Offered Engine and Alternator. 371 Day Fuel Tank of Standard Capacity as per Rating Complete Fuel Gauge, Inlet/Outlet Connections, Drains Plug, Etc. 372 Residential Silencer (1.5 Meter with 750 mm diaApprox) Including Insulation of Silencer. 373 2 Nos 12 Volts DC Battery of Suitable Capacity with Leads. 374 1 Set of AVM Pads Fitted in Base Frame. 375 TOTAL FOR 200 KVA DG SET 376 Supply of H.T. Cable 377 Supply & Testing of following 11 KV (E) grade multicore Aluminium conductor XLPE insulated cable, insulation screening withextruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required. 378 3 C x 240 Sq. mm11 KV (E) 379 Supply , Installation, Testing & Commissioning of Integrated Post Top Lantern With 40W LED Lampincluding Pole &connection with 3 x 2.5 sq.mm single core PVC insulated copper conductor cable from junction box to fixture as required. 380 Supply , Installation, Testing & Commissioning of 50 W LED withcomplete with pot optic reflector connection with 3x2.5sq.mm single core PVC insulated copper conductor cable from junction box to fixture as required. 381 Supply, Installation, Testing and Commissioning of 200x160x98 (KVPC) Polycarbonate thermoplastics enclosure - junction box with I.P - 65 Protection with Terminals &cable hinged cover of approved design complete having gasket of internally embedded & made of polyeutherene & should be weather proof, rust proof, dust proof, water proof - box shall be tested as per IEC - 60670-2/60670-22. the box shall have self threaded holes & provision for mounting din rail. with 2 Nos cable gland including supplying & fixing crimping 2 nos lugs & 1 nos 32A connector 6 way for looping the incoming & outgoing cables and also connection of the street light one 6A SP MCB Including Connection of 2x6 sqmm Cable etc as Required. 382 Supplying of 6 mtr long hot dip Galvanized octagonal Pole with top of the pole 70 mm dia (A/F) and bottom of the pole 130 mm dia (A/F) made out of 3mm sheet with MS base plate of size 200mm (NS) x 200mm (NS) x 16mm (NS) on precast RCC foundation complete with suitable size openinginside the pole with flush weather proof door with locking facility preferably with LN key having proper arrangement with Accommodating of 1 Nos. 6 Amp.,10 KA MCB & neutral link4 way connector suitable for 25 Sqmm cable complete with electrically safe including inside cable termination with thimbles i/c wiring from pole box to fitting with 3x1.5 sq.mm. FRLS PVC insulated copper conductor wire, earth connection, din channel, earth stud and other accessories pertaining to this pole (But without street light fitting) etc as reqd.including providing & laying in position suitable RCC foundation as required for 6 mtr. octagonal hot dip Galvanized Pole as per Manufacturers drawing with 1:1.5:3 concrete (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including excavation of all kind of earth such as all type of soil/soft rock or hard rock etc. as per existing site condition i/c providing, cutting, bending and placing reinforcement & IncludingJ typefoundation bolts , anchor plate and templates in position as per manufacturer Standard and Providing PVC Pipe for Cable Entry and Exits Including Disposal of Surplus Malba / Softrock / Hardrock Stone etc.as Required. 383 Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing laid in ground including cost of digging upto required depth, 150 mm sand all around the cable, brick protection and back filling, clamped to wall with suitable clamps including saddles fixing bolts, Connection Testing and commissioning as Required. 384 2x6 sqmm 385 Supplying of Following sizes 1100 volt grade XLPE insulated PVC sheathed aluminium conductor armoured cables as per specification in existing trenches/pipes, cable trays, ducts, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning as Required. 386 2x6 sqmm 387 Supply, Installation, Testing and Commissioning of 120w Flood Light, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light, suitable for highlighting architectural facade and general purpose lighting. 388 SOLAR POWER SYSTEM 389 Supplying, installation, testing and commissioning of Grid interactive roof top solar photo voltaic power generation system including space frame 390 (SCHEDULED ITEMS - AS PER DSR (E&M) 2022 391 (A) Supplying , installation , testing and commissioning of electric driven terrace pump suitable for automatic opeartion and consisiting of the following, complete in all respects as required:( Terrace pump) 392 (B) Horizontal type, multistage, centifugal, split casing pump of cast iron body & bronze impeller with stainless shaft, mechanical conforming to IS:1520 393 © Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 hz, AC supply with IP55 clas of protection for enclosure, horizontal foot mounted type with class-F insulation, conforming to IS-325. 394 (d)M.S fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. 395 (E)Suitbalecement concrete foundation duly plastered and with anti vibration pads. 396 Discharge : 450 liter per minute 397 Head : 35 meter 398 Providing, laying, testing & commissioningof C class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding, fittings like elbows, tees, flangers, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 399 100 mm dia 400 Providing, laying, testing & commissioning of B class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc, and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 401 100mm dia 402 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type-A) with blank Gunmetal/Stainless Steel cap and chain as required: 403 Single headed Stainless steel. 404 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required. 405 100 MM NB 406 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required 407 100 NB 408 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 409 100 mm dia. 410 Supplyinig and fixing 63 mm dia , 15 mm long RRL hose pipe with 63 mm dia male and female couplings duly bound with GIwire , rivets etc.confirming to IS 636 (type-A) as required: 411 Supply, fixing first aid Hose Reel with MS costruction spray painted in post office red , conforming to IS 884 complete with the following as required 20 mm nominal internals diawater hoseThermo plastic (Textile reinforced) type -2as per IS 12585) 20 mm nominal internal dia gun metal globe valve & nozzle Drum and brackets for fixing the equipments on wall .connections from riser with 25 mm dia stop gun metalvalve & M.S . Pipe and socket.40 M 412 Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confirming to IS 903 Suitable for instantaneous connection to interconnect hose pipe coupling as required:Stainless steel (Grade 304) 413 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 414 2 way-100 mm dia M.S. Pipe 415 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 416 TOTAL- A(SCHEDULED ITEMS - AS PER DSR E&M 2022) 417 (NON SCHEDULED ITEMS - AS PER MARKET RATES) 418 Supply & erection of ISI marked portable fire extinguishers, confirming to IS:15683, wall mounted type, wall brackets complete in all respect as per standard item with all accessories, delivery hose & nozzle whereever required, including fixing on walls as per the directions ofEngineer-in-charge. 419 Water CO2type. 9 Lt. capacity 420 D.C.P.Type 6 kg. capacity 421 ABC dry powder Type 6 kg. capacity 422 CO2 gas type. 6.5 kg. cap. -Trolley mounted 423 Providing & fixing neoprene rubber double flangedrubber expansion joint(anti vibration bellow) of standard length as per manufacturers specifications. suitable for hydrostatic test pressure of 21 kg/sqcm including all necessary fittings i.e. rubber gasket, nuts, bolts, washers etc complete as required. 424 100 mm dia. 425 150 mm dia. 426 Providing & fixing standard carbon steel fireman axe with rubber insulated handle tested to 20000 Volts. 427 Supply, fixing, testing & commissioning of 25 mm dia inspecting and testing assembly with gun metal valve, sight glass, by pass valve and connection to the drain line as required to complete the system. 428 Providing and fixing of cast iron body 100 mm dia Draw out connection in Under ground water storage tankwith heavy class MS suction pipe of required length,foot valve, suction coupling in conformity with local regulations complete in all respects. 429 Providing and fixing weather proof standard fire hose cabinet (750 mm x 600 mm x 250 mm)outdoor typemade of not less than 16 SWG MS sheethaving glassed hinged door (5 mm thick glass) including necessary locking arrangement with handle for housing two nos.15 meter long fire hose pipes, branch pipeas required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coat of fire red colour). The cabinet shall be mounted onself standing mounted type MS Angle iron frame as required. The words FIRE HOSE to be painted on the box. 430 Providing and fixing standard fire hose cabinet door with frame (900 mm x 2000 mm ) or (suitable to fit in the duct made of not less than 16 SWG MS sheethavingglass hinged door (5 mm thick glass) including necessary locking arrangement with handle as required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coats of fire red colour). The door shall be fixed in the masonry wall or as required. The words FIRE HOSE to be painted on the box. 431 Supply, installation and testing of cylindrical type flanged pressurevessel tank, 450 mm dia, 2 m long and of 10 mm thick M.S., common for a set of fire pumpsincluding flanged connection, suitable supporting legswith MS plate of size 75x75x5 mm at the bottom and grouted in CC foundation. The air vessel tank shall be provided with air release valve, stop cock, safety valve, pressure gauge, 50 mm dia drain valve, suitable length of connecting pipe and valve from delivery header to vessel tank, suitable pressure switches to operate all pumps (1 nos each), tested to min 25 KG/cm2complete including painting with synthetic enamel paint of approved shade with all accessories as per direction of the Engineer-in-charge. (For Pump House) 432 Providing & fixing 100 mm dia dial pressure gauge including making connections with MS pipecomplete in all respects. 433 PART-A EQUIPMENT 434 OUTDOOR UNITS (HEAT PUMP TYPE) 435 Supplying,installing,testingandcommissioningofaircooled variable refrigerant volume / Flow modular typeairconditioning system with R410a refrigerant. The PCB Chamber of outdoor unit should be refrigerant cooled suitable for 415±10% 3 Phase, 50 cycles. The unit shall consist of indoor and out door units withindividual controllerasperdetailgiveninspecifications andhaving followingitems:(Theseitemsareto be giveninIndian rupeeswithcustomduites,inlandfrt,clearanceetconSitebasis) 436 Modular type outdoor units equippedwith highlyefficient 100% inverter type hermitically sealed scroll compressors, minimum two comprossors for and above 14 HP modules, with special precoated heat exchanger, low noise condenser fan housed in compact housing duly powder coated and manufacturer of compressor and outdoor unit should be same. The Unit should have automatic refrigerant charge function. The static pressure of the outdoor unit shall be more then78Patoavoidhotairrecirculation.The unitshallbeabletooperateuptoto45°Cin coolingmode.The unit shall also have feature to automatically modulate the evaporative temperature between 6 deg C to 11 deg C with respecttoloadforbettercomfortandenergy efficiency etc complete as reqd. The units should have free phase technology for countinued operation. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping .The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 of following capacitites: 437 Cost of R 410 A Gas should be inclusive 438 The outdoor unit should include all loading, unloading, transportation, power cabling/wiring from near the indoor and outdoor units respectively. 439 The outdoor unit should include all loading, unloading, transportation, power cabling/wiring,( Y/T joints which is required for ODU Zone requirement Modules) from near the indoor and outdoor units respectively. Outdoor Units-Heat Pump , Fully Gas Charged and Aluminum fins within the ODU (condensing) unit shall be coated with polysiloxane based coating. 440 The Vendor should considere the deration on ODU election as per Singroli MP Ambient conditions 441 18 HP Outdoor unit VRV/VRF Zone-01 442 16 HP Outdoor unit VRV/VRF Zone-02 443 22 HP Outdoor unit VRV/VRF Zone-03 444 26 HP Outdoor unit VRV/VRF Zone-02 445 INDOOR UNITS 446 Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, cord less remote control etc., suitable for operation on single phase 230 V ±10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree CDB and 19 Degree C WB temperature. 447 Ceiling Mounted Cassette Unit 448 300-318 CFM / 0.63-0.80 TR 449 310-335 CFM / 1.0 TR 450 600-670 CFM / 1.2-1.3 TR 451 812-830 CFM / 1.6-2.0 TR 452 850-865 CFM / 2.5-2.8 TR 453 1130-1165 CFM / 3.1-3.2 TR 454 Ceiling Mounted HSP Ductable Unit 455 1130 -1150 CFM / 3.0-3.40 TR 456 1200-1377 CFM / 3.95-4.0 TR 457 1600-2050 CFM / 4.5-5.5 TR 458 2047-2295 CFM / 6.36-7.1 TR 459 REMOTE CONTROLLERS 460 Supply, installation, tesing and commissioning of Imported Remote controllers (Corded) for operation of ductable indoor units and AHUs. 461 Touch screen controller for indoor units controller - VRV 462 Supply, installation, testing and commissioning of touch screen controller (Which is controlled 45 nos. indoor units in terms of ON/Off Status, temp. Status, Fan Speed, ODU On/Off Status etc.) with all accessories and controls. 463 REFNUTS /T/ Y-JOINTS 464 Supply, installation, tesing and commissioning of Imported fittings Y-joints insulated, distributer and headers for all Indoor units at both the ends floors layout as per layout drawings.All interconnecting joints, Y Joints withpolysiloxane based coating 465 REFRIGERANT PIPING 466 Supply, installation, testing and commissioning of Interconnectingrefrigerantpipe work with (13/ 19mm thick) cross linked closed cell Oxide Acetate Foam tubular insulation between each set ofindoor & outdoor units asper specifications, allpiping inside the room shall be properly supported with hangersandv All interconnecting Copper piping, joints, U bends withoxycoat dual barrier coating shall run incable tray. (Note: Ref. Piping Length may be review as per site routing) 467 06.35 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 468 09.52 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 469 12.70 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 470 15.88 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 471 19.05 mm with 13 mm thick cross linked closed cell Oxide Acetate Foam insulation 472 22.22 mm with 19 mm thick cross linked closed cell Oxide Acetate Foam insulation 473 28.58 mm with 19 mm thick cross linked closed cell Oxide Acetate Foam insulation 474 34.92 mm with 19 mm thick cross linked closed cell Oxide Acetate Foam insulation 475 41.30 mm with 19 mm thick cross linked closed cell Oxide Acetate Foam insulation 476 TRANSMISSION & CONTROL WIRING 477 Supply, installation, testing, termination and commissioning of control cum transimission wiring (should be shielded cable in PVC Pipe) of 2C x 1.5 Sqmm Cu between indoor unit and out door unit and indoor units and its remote controller. 478 2C x 1.5 Sqmm Cu Cable or as per Manufacturer OEM 479 Perforated GITray with hangers & supports for copper piping (250 mm wide) 480 Refrigerant-410a 481 Supply , charging & Leackage testing of refrigerant -410a in additionalcopper piping circuit. 482 CONDENSATE DRAIN PIPE 483 Supplying, fixing,testing and commissioning offollowing PVC pipes for condensate drain duly insulated with Fire rated Class O kinny foam /Nitrile Rubber & vapour barrier duly secured with adhesive tape as per specification ,cut to required length and installed with all joints , including the necessary fittings. (For all the AHU/FCU units upto the main header in the shaft dor vertical risers) 484 65mm dia 485 50mm dia 486 40mm dia 487 30mm dia 488 25 mm dia 489 TOTAL CARRIED OVER TO SUMMARY ( PART-A EQUIPMENTS) 490 PART-B VENTILATION 491 Propeller fan 492 Supply,installation,testing and commissioning of Certified Propeller fan of the following capacity of approved make and specification. Fan shall be supplied with aluminum gravity louver & bird screen and Speed Regulator. 493 200 mmdia propeller fan,with single phase motor 494 300 mmdia propeller fan,with single phase motor 495 450 mmdia propeller fan ,with single phase motor 496 Inline fan 497 Supply, installation, testing and commissioning ofCertified Circular/Rectangular swing type Inline fan with fiire retardent Canvas connection Speed Regulatorof the following capacity of approved make and specification. 498 100-300 CFM,5-7 mm SP WG with Single phase motor 499 350-400 CFM,10-12 mm SP WG with Single phase motor 500 600-800 CFM,10-12 mm SP WG with Single phase motor 501 Tube Axial Flow fans 502 SITC of Long case Tube axial flow fans, as per specifications and approved makes suitable for three phase operation respectively Normal/Smoke case. 503 SITC of AMCA Certified (For Air and Sound Performance) tube axial flow fan of different capacity as mentioned below in standard M.S.contruction. Entire fan model & AMCA Seal shall apear in techncial submittal of fan. All the fans are synthetic enamelled panited/hot dip galvanized with minimum 220 GSM Zinc Coating and complete with bird screen at inlet. The electric motor coupler shall be squirrel cage induction motor (IE-2 type) confirming to IS - 325-IP - 55 with class `F insulation.Fan efficiency should not be less than 70 %, noise level should not be more than 85 db @ 3 m distance when measured in hemisperical reverberant room conditions. Fans should be as per specification and drawings. (As per Vent. Fan Schedule ) (Makeup Air & Pressurization Fans with St. Press. of 40 mmWG/Make Up Air Fan at 30mm WG) 504 6000 CFM (For Stairwell/Liftwell Pressurization) 505 6500 CFM (For Smoke Extract,with H Class insulation) 506 AIR SIDE WORKS 507 Site Fabricated Duct - GI duct 508 Supply,Installation,balancing and commissioning of fabricated at site GSS sheet metal ducts (rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter,vanes, hangers, Gripple supportsetc.) in accordance with the approved shop drawings and specifications , and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to suit pieces. 509 0.63mm (24 gauge) GSS 510 0.8 mm (22 gauge)GSS 511 Factory Fabricated Duct - GI duct 512 Supply,Installation,balancing and commissioning of factory fabricated GSS sheet metal ducts (rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter,vanes, hangers, Gripple supportsetc.) in accordance with the approved shop drawings and specifications , and shall also confirm to the BIS specifications.The duct shall be fabricated at site for to suit pieces. 513 0.63mm (24 gauge) GSS 514 0.8 mm (22 gauge)GSS 515 Supply, Fabrication, Installation and testing of Insulated Al. Flexible ducts in accordance with the approved shop floor drawings and specifications and shall also confirm to the BIS specifications. 516 200 mm Dia. 517 150 mm Dia. 518 Grilles/Diffusers 519 Supplying and fixing of Extruded aluminium supply and return air grilles/diffusers/louvres with dampers, supply air plenum etc. duly powder coated as per specifications and drawings. 520 Aluminium supply air grilles with damper. 521 Aluminium return air grilles without damper. 522 Aluminium supply air square diffuser with damper 523 Aluminium return/exhaust air square diffuser without damper. 524 Aluminium return/exhaust airValve circular/squirell diffuser without damper. 525 Fresh Air/Exhaust Air Louvers 526 Supplying and fixing ofextruded aluminium louvres with frame bird screeen , mounting arrangement etc. as per specifications and drawings. 527 Fresh Air/Exhaust Louvers 528 Supply,Installation,Testing and commissioning of doble layer canvas connection with 1/2 hr. fire ratingasper specification. 529 MECHANICAL INSULATION 530 DUCT LINE ACOUSTIC TREATMENT 531 Supply and installation of cross linked open cell Oxide Acetate( AccoIsolate) Foam Acoustic insulation on ducts having density of 30 to 60Kg/ M³ ,having K value 0.029 W/m ° K at 0°C Deg temp and temp range of-70°C to +100°C and fire rating Class O as per BS 476 Part 6 fromCBRI,Roorkee and CFC/HCFC free as per US EPA 5021 A(2014 ). • Smoke & Toxicity index of material shall be passed as per IMO MSC 307 ( 88 ) 2010 Anexx 1 Pt 2 andas per the approved specifications. 532 15mm thick Oxice Acetate Acco IsolateAcoustic open cell insulation on one side for Duct acoustic insulation 533 DUCT LINE THERMAL INSULATION 534 Supply and installation of cross linked closed cell Oxide Acetate( Thermo Isolate) Foam Thermal insulation on ducts having density 0f 30 ±3Kg/ M³ ,having K value 0.029 W/m ° K at 0°C Deg temp and temp range of-70°C to +100°C and fire rating Class O as per BS 476 Part 6 fromCBRI,Roorkee and CFC/HCFC free as per US EPA 5021 A(2014 ). • Smoke & Toxicity index of material shall be passed as per IMO MSC 307 ( 88 ) 2010 Anexx 1 Pt 2 andas per the approved specifications. 535 25 mm thick insulation oxide acetatefoam with 2 coat layer of 7 mile cloth with starbond or eql. adhesive on Exposed supply air duct 536 13 mm thick insulation oxide acetatefoam laminated with aluminium foil supply air duct 537 9mm thick insulation oxide acetatefoam laminated with aluminium foil supply air duct 538 EXPOSED ROOF INSULATION 539 Supply and installation of cross linked closed cell Oxide Acetate( Thermo Isolate) Foam Thermal insulation on ducts having density 0f 30 ±3Kg/ M³ ,having K value 0.029 W/m ° K at 0°C Deg temp and temp range of-70°C to +100°C and fire rating Class O as per BS 476 Part 6 fromCBRI,Roorkee and CFC/HCFC free as per US EPA 5021 A(2014 ). • Smoke & Toxicity index of material shall be passed as per IMO MSC 307 ( 88 ) 2010 Anexx 1 Pt 2 andas per the approved specifications. 540 19mmthick oxide acetate insulation for underceck plain 541 TOTAL CARRIED TOSUMMARY(Mechanical Insulation works) 542 ASSOCIATED ELECTRICAL WORKS 543 Therates for the distribution boards from the Breakers andinstrumentsshall also include the following : 544 Wiring forlight / Fan points with 1.5 sq. mm PVC insulatedcopper conductor1100 Volt grade strandedflexible FRLS wiresofapproved makein1.6mmthick25mmdiaMS conduitincluding costof providing & fixing saddles, hangers, supports, cutting chases and filling chases for recessed conduiting, and including the cost of providing and fixing a6 amp240Volt ModularPlatetypeswitchesof approved quality,colour, makeanddesign with mouldedcover platein zinc chromate passivated MS box and including the cost of running 1.5 sq. mm PVC insulated copper earth wire for loop earthing etc. complete 545 TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequatesize of neutral link. 546 All MCB’s shall be of minimum 10 KA breaking capacity and MCCB s shall be not lessthan 25KA 547 The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermalmagnetic microprocessorreleasesas per BOQand following : 548 i.MCCB rating upto 250 Amps with thermal magnetic releases. 549 ii. MCCB above 250 Amps with microprocessor releases. 550 All MCB’s used for protection ofresistiveand lightlyinductive loadshallbetype “B”characteristic and inductive(motor)loadshall be of type “C” characteristic. 551 Degree of protection for following type of distribution panel enclosureshall be as per IS:13947-1993. 552 i.IP 42 for indoor panels. 553 ii. IP 55 for ODU panel. 554 AllMCCB’sshall beprovidedwithoperatingmechanismfordoorinterlock. 555 All hinged door shall be earthedthrough2.5 sq mm tinnedbraidedcopper wire. 556 Providing cableclamps/ supportswithin distributionboardscablealley. 557 Current density of aluminium shall be 1sq mm for 1.0 Amps for ratedcurrent of bus bars. 558 Model, current capacity location and frame size of switchgear shall be writteninside of thepanel doors with paint / permanent marker asapproved shop drawings / site requirment. 559 All meter shall be digital type and all starter shall be as per Type-2 Coordination chart 560 Current Transfomer shall be resin cast. 561 All Panel Shall be BMS Compitable 562 AHU/Fan Panel 563 Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of following LT panels fabricated out of 14 guage CRCA sheet steel in cubical formationwith reinforecment of suitable size angle iron and channel T iron flats. All steel material used in the construction of panels shall be powder coated. A solid busbar shall be provided at the bottom of the panel with two connecting eyes for termination. The boards shall be suitable for 415 volts, 50 Hz, 3 phase , 4 wire supply system. All the hardware used in the fabrication of the panel shall be galvanized with zinc passivation. The panel shall be compartmentalized to accommodate one feeder in each compartment. A vertcal cable alley of suitable width shall be provided to serve on or two vertical feeder sections. Also the opening between the busbar chamber and the feeder section shall be shrouded with bakelite / hylam sheet with min.3 mm thickness. 564 The panel drawing shall be approved before taking up the fabrication and compitable BMS if in future required. (ALL AHU PANEL WITH 565 In All panel Each starter should have remote control and interlocking facilities including auto manual switch, NO/NC contacts for control and must have auto manual operation suitable to take signal from fire alarm panel for automatic operation of fan in case of fire.All smoke /vent. fan panel the starters shall have suitable facility to operate with fire sensing control modules. 566 Vent. Fan Panel- MCC -1 567 Incoming 568 1 no. 63 amp MCCB 569 Phase indicating lights with control fuses. 570 Breaker ON/OFF/TRIP indicating lights. 571 Bus Bars 572 100 amp TPN Aluminum Bus Bar with heat shrinkable insulation colored sleeves. 573 Outgoings 574 3 nos. 6-10 A,TP MPCB(With DOL Starter) 575 The base frame shall be 75 mm x 5 mm. 576 Panel as described above and in drawings. 577 METER BOARD / SUB PANELS 578 Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing / wall mounted factory built sheet steel enclosed modular construction extendable panel, suitable for operation on 415 + 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections & indications and mounted with the following as per drawing and technical specifications attached etc. complete as required. 579 ODUs Panel-01-TERRHVAC 580 Same as above item but outdoor Panel with following accessories. 581 INCOMING: 582 1 No. 200 amps, 415VTPN MCCB with overcurrent and short circuit releases, all indication, push button etc. 583 Coloured (Red, Yellow, Blue) phase indicating lamp - 1 set 584 (0 - 200 A) CT operated Ammeter with selector switch& 3 nos. CTs ratio 200/5A , 15VA burden & accuracy class of 1.0 - 1 set 585 0-500 V Voltmeter with selector switch - 1 set 586 BUSBAR: 587 250 Amp. TPN, 35 kA Al. Bus Bar 588 OUTGOINGS: 589 80A, TPN ELCB with 300mA- 3 Nos. (Incl. 1No. Spare) 590 40A, TPN ELCB with 300mA- 5 Nos. (Incl. 1No. Spare) 591 ODU Panel Described as above/As per Manufacturer ODU Configuration. 592 Spcl. Note : All Above mentionedpanel SITC as per actual GA dwgs. equipments and final config,. Of ODUs. 593 CABLING (POWER ) 594 Power Cabling and Earthing: 595 Spcl. All Cables Should be fire survival Cables (FRLS) 596 Supply, installation, testing & commisioning of LPCB approved mineral insulated copper conductor cables, construction as per BSEN 60702-1:2002 suitable for withstanding 950 deg under fire conditions as per BS 6387 CWZ and 850 deg under fire conditions on one single sample as per BSEN 50200. Cable should be manufactured with seamless copper tube and should be HFLS sheathed. (Tagging to be provided with aluminium strips on both the ends as approved). 597 3Cx10 Sqmm 598 3Cx06 Sqmm 599 3Cx04 Sqmm 600 4Cx06 Sqmm Cu 601 4Cx10 Sqmm Cu 602 Control Cabling 603 Supply, installation, testing & commisioning ofCopper conductor , PVC insulated, PVC sheathed armoured cable of 1.1 KV grade (Which is Interconnecting wiring for the fire alarm system with the AHU and the smoke dampers and AHU to Control Consol Panel). 604 8C x 1.5 Sqmm 605 Supply, installation, testing & commisioning of cable termination of above cables with copper lugs & flameproof brass compression glands on both the ends with inhibting compound etc. complete as required. 606 3Cx10 Sqmm 607 3Cx06 Sqmm 608 3Cx04 Sqmm 609 4Cx06 Sqmm Cu 610 4Cx10 Sqmm Cu 611 Supplying and installing following size of perforated G.I. cable trays, G.I. bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with suitable suspenders including G.I. bolts & nuts, painting of suspenders etc. complete as required. 612 100 mm. Width x 50mm. Depth x 1.6mm. Thickness. 613 150 mm. Width x 50mm. Depth x 1.6mm. Thickness. 614 225 mm. Width x 50mm. Depth x 1.6mm. Thickness. 615 Providing and fixing following size of G.I. strip / G.I. wire on surface or in recess for loop earthing alongwith the existing surface/ recessed conduit/ submain wiring / on cable tray/ on surface including G.I. clamps etc. complete as required. 616 6 SWG G.I. wire 617 Electrical work i.e. 618 3 Pin socket switch for Cassette, fcu, inline fan, propeller fan etc. near to the each unit. 619 Isolator Switch (Weather Proof) near to the each ODU. 620 Copper wiring /earthing from Isolator switch to M/C (chillers, pump, AHU , Fan etc.) 621 All DOL Starter Panel and Power cable for Fans/AHU 622 RCC Foundation for chiller, pumps, panels/outdoor units etc.. 623 Spcl. Note:The work includes design, supply, fabrication, erection, testing & commissioning of the complete air conditioning system with items specified above. 624 Supply Installation , Testing & Commissioning of 8 Passangers, 544 Kg. 1mps. Automatic Elevator, with VVVF and Microprocessor based Simplex Collective Selectivewith/without Provision ofattendant control. Separate Landing Push Button Box for all Landings with scrolling indicator. with provision of Attendant control, having 2 stops , 2 Openings with SS Cabin (Hair Line Finish) havingCross flow fan for Ventillation , having sleek (SS hair Line finish-PVC) and LED small Circular lighting all complete. 625 Other Features 626 Battery Operated Emergency Light And Alarm Bell 627 Call Register Signal And Vf Door Operator 628 False Ceiling In Car 629 Vandal Proof S.S. Button With S.S. Cover 630 Firemans Switch 631 Infra Red Door Screen 632 Full Car Operating Panel 633 3 Way Intercom / Press And Speak Phone 634 Push Button - Orange L E D Illumination 635 Dot Matrix Led D & P Indicators In Car & Landings -Orange Colour 636 Automatic Rescue Device 637 Minor Builders Work 638 Scaffolding 639 Floor Annunciator With Music 640 Braille Buttons 641 Sill Support 642 Lift License 643 Overload Warning Indicator With Audio Announcement 644 Pit Ladder 645 Auto Light & Fan Switch Off (Pod) 646 SUB HEAD - I: CIRCUIT CUM POINT WIRING 647 SWITCH CONTROL LIGHT POINTS 648 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 649 Group C 650 MCB CONTROL LIGHT POINTS 651 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Switch Control Primary Points) 652 Primary point controlled by one MCB. 653 Same as item above but Secondary point. i.e. Points to be looped with Primary pointwith 2.5 sqmm wire and Point wiring 654 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 655 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 656 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 657 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 658 2 X 6 sq. mm + 1 X 6 sq. mm earth wire 659 2 x 10 sq. mm + 1 x 10 sq.mm earth wire 660 4 X 10 sq. mm + 2 X 6 sq. mm earth wire 661 4 X 16 sq. mm + 2 X 6 sq. mm earth wire 662 Supplying and fixingsuitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing3 pin 5/6 Amp modular socket outlet and 5/6 A modular switch, connection etc. as required. 663 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 664 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 665 Telephone socket outlet 666 SUBHEAD -II - FITTINGS & FIXTURES 667 Supply, Installation, Testing and Commissioning of 18/20W Wall/Surface mouted 4 ft. LED 668 Supply, Installation, Testing and Commissioning of 40W LED POST TOP LANTERN 669 Supply, Installation, Testing and Commissioning of 40W LED GATE LIGHT 670 Supply, Installation, Testing and Commissioning of9W (Nominal)Wall Bracket Light 671 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 672 SUBHEAD - III - DISTRIBUTION BOARDS 673 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 674 12 way, Double door 675 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 676 Single Pole 677 Single Pole Neutral 678 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 679 40 A 680 63 A 681 Supplying and fixing following rating, double pole, (single phaseand neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 682 40 A 683 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Madhya Pradesh View Result →
31.
Educational and Research Institute #9393785 Technical Bid
Rate Contract For Supply Of Consumables/Non-Consumables For The Department Of Neurosurgery Supply Of Rate Contract For Supply Of Consumables/Non-Consumables For The Department Of Neurosurgery , Tender Conditions: (Please Read Carefully!) 1) Samples To Be Submitted For All Consumable Items, Otherwise Your Bid Will Not Be Considered. 2) Sample / Catlogue Of Instrumentswith Details Of The Make And Design Should Be Made Available Failing Which The Bid Will Not Be Considered. 2) All Instruments Should Have Company Name, Catalogue Number, Manufacturing Lot Number Embossed On Each And Every Instrument Otherwise It Will Be Rejected 4) Firms Participating In The Tender Must Demonstrate Samples Of The Items If They Are Specifically Asked To Do So. A Certificate Should Be Taken From The Department, Signed By A Neurosurgery Consultant That Samples Were Given And/Or A Demonstration Was Done. 5) The Name And Address Of The Manufacturer Must Be Printed On The Packaging Of The Disposable Items Failing Which The Tender Is Liable To Be Rejected. 6) The Disposable Items Must Have A Shelf Life Of At Least 2 Years At The Time Of Supply Unless The Original Manufacturer Writes, In The Product Insert, That The Expiry Date Is Less Than Two Years From Date Of Manufacture, In Which Case, The Time Till Expiry Should Be 75% Or More Of The Time Described. 7) Staggered Supply Should Be Arranged, Every Two Months, For Items That Occupy Storage Space, On Our Request. 8) All Instrumentation (Implants) Or Staplers Should Be Mri Compatible. 9) In Case Of Non-Consumable With Compatible Proprietary Consumable, L1 Will Be Calculated Based On Combined Value Of Equipment (Total Required) With Consumable (Total Projected Quantity). 10) Please Read Specification Carefully Since Many Details, Including Numbers Have Been Changed. Please Do Not Cut And Paste Previous Quotes!! All Intruments Must Be Made Of Stainless Steel Or High Quality Appropiate Alloy Materials Unless Specified Otherwise 11) Minorvariation In The Diamension Of The Insturments Will Be Acceptable (After Checking The Sample Provided) 12) For All Consumable / Non Consumable Items Indian Standards Certificate (Cdsco/Sla) Is Mandatory Wherever Indian Standards (Cdsco/Sla) Are Not Available Iso/Usfda/Ce Certificate May Be Produced. , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 7Mm Force 180 Grams, Blade Length 9Mm ,Straight, Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 7Mm Force 180 Grams, Blade Length 9Mm ,Curved, Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 7.8Mm Force 180 Grams, Blade Length 11Mm,Straight Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 7.8Mm Force 180 Grams, Blade Length 11Mm,Curved Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 5.7Mm Force 200 Grams, Blade Length 7Mm, Straight Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 5.7Mm Force 200 Grams, Blade Length 7Mm,Curved Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 3.3Mm Force 110 Grams, Blade Length 3Mm, Straight , Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 4Mm Force 110 Grams, Blade Length 5Mm Straight, Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 9.2Mm Force 280 Grams, Blade Length 15Mm,Straight Permanent , Aneurysm Clip: Yasargil Type, Titanium Max. Opening 9.2Mm Force 280 Grams, Blade Length 15Mm,Curved Permanent , Aneurysm Clip: Yasargil Type, Titanium (Steel Component If Titanium Is Not Available With Any Manufacturer) Sundt Graft Type Vessel Wrapping Clip 7 Mm. This Has A Dacron Type Fabric Built Into The Clip To Cover A Vessel Tear. , Aneurysm Clip: Yasargil Type, Titanium, Fenestrated 3.5Mm Permanent Clip - Straight Blade Length 3Mm Mm , Aneurysm Clip: Yasargil Type, Titanium, Fenestrated 3.5Mm Permanent Clips Straight, Blade5 Mm, , Aneurysm Clip: Yasargil Type, Titanium, Fenestrated 3.5Mm Permanent Clips Straight Blade 9 Mm, , Aneurysm Clip:Yasargil Type, Titanium, Fenestrated 3.5Mm Permanent Clips Right Angle 5 Mm , Aneurysm Clip:Yasargil Type, Titanium, Fenestrated 3.5Mm Permanent Clips, Right Angle Blade 7Mm , Aneurysm Clip: Yasargil Type, Titanium, Deeply Curved Tip 7Mm Blade , Aneurysm Clip: Yasargil Type, Titanium,Bayonetted 2.5Mm Step And 5Mm Blade Length , Aneurysm Clip: Yasargil Type, Titanium,Permanent Clips Right Angle 9 Mm Right To Left , Aneurysm Clip: Yasargil Type, Titanium, Permanent Clips Right Angle 9 Mm Right To Right , Aneurysm Clip Yasargil Type, Titanium, 3 Mm Size For Use In Arteriovenous Aneurysm Surgery (Permanent, Mini Clips) , Aneurysm Clip Yasargil Type, Titanium, Permanent Clips Side Angled 7Mm Right To Left , Aneurysm Clip Yasargil Type, Titanium, Permanent Clips Side Angled 7Mm Left To Right , Aneurysm Clip Yasargil Type Temporary Straight 3-5Mm , Aneurysm Clip Yasargil Type Temporary Straight 5-7Mm , Aneurysm Clip Yasargil Type Temporary Curved 3-5Mm , Aneurysm Clip Yasargil Type Temporary Curved 5-7Mm , Ultrashort Fenestrated (Fenestration 3Mm) Nub Clip. (Yasargil Type , Titanium) , Ultrashort Fenestrated (Fenestration 5Mm) Nub Clip. (Yasargil Type , Titanium) , Reinforcing Booster Clip, Yasargil , Sugita Type Aneurysm Clip (Titanium Or Permanent) (Low Profile Spring, Sugita Bridge Wire System, And Channel In Blade) Quote A Uniform Rate For A Single Non-Fenestrated Clip. We Will Inform The Clip Size And Shape At The Time Of Purchase Oder , Sugita Type Aneurysm Clip (Titanium Or Permanent) (Low Profile Spring, Sugita Bridge Wire System, And Channel In Blade) Quote A Uniform Rate For A Single Fenestrated Clip. We Will Inform The Clip Size And Shape At The Time Of Purchase Oder , Sugita Clips With Tapered Design With Atraumatic Groove With Laser Etched Lot Number For Identification. Clip Should Be Made Of Non-Ferromagnetic Titanium Alloyal Verified By Astm F136 / Iso 5832-3 For Compatiblity With 3 Tesla Mri. Quote For A Uniform Rate For A Single Non-Fenestrated Clip. We Will Inform Clips Size And Shape At The Time Of Purchase Order. , Sugita Clips With Tapered Design With Atraumatic Groove With Laser Etched Lot Number For Identification.Clip Should Be Made Of Non-Ferromagnetic Titanium Alloyal Verified By Astm F136 / Iso 5832-3 For Compatiblity With 3 Tesla Mri Quote For A Uniform Rate For A Single Fenestrated Clip. We Will Inform Clips Size And Shape At The Time Of Purchase Order. , Perneczky Type Aneurysm Clip. Quote A Uniform Rate For A Single Non Fenestrated Clip. We Will Inform The Clip Size And Shape At The Time Of Purchase Oder , Perneczky Type Aneurysm Clip. Quote A Uniform Rate For A Single Fenestrated Clip. We Will Inform The Clip Size And Shape At The Time Of Purchase Oder , Aneurysm Clip - T Type ,Titanium,Permanent 9Mm Blade Straight 90 Degree , Aneurysm Clip - T Type ,Titanium,Permanent 13Mm Blade Upcurved 60 Degree , Aneurysm Clip - T Type ,Titanium,Permanent 13Mm Blade Downcurved 60 Degree , Aneurysm Clip - T Type ,Titanium,Permanent 9Mm Blade Upcurved 90 Degree , Aneurysm Clip - T Type ,Titanium,Permanent 9Mm Blade Downcurved 90 Degree , Yasargil Standard Bayonetted Aneurysm Clip Applier Titanium Double Hinged Rotating Tip ,Length Around 20 Cm , Yasargil Standard Bayonetted Aneurysm Clip Applier Titanium Length Around 20 Cm , Transparent Cannula Site Dressing Transparent Polyurathane, Impervious To Bacteria, But Permeable To Water Vapor Maintaining Transparency. Self Adhesive (10-15Cm) With A Chlorhidine Gluconate Layer 3-5 Cm) And Iv Line Securing Adhesive Stripand Label. , Odourless Hydrocolloid Dressing With Water Resissnt Film Border And An Outer Barrier Film 15 Cm X 15 Cm , Abosorbant Clear Acrylic Dressing Which Should Be Three Layered With A Top Layer Of Breathable (Letting Oxygen And Vapour) Film , Middle Layer Of Acrylic Polymer And A Perforated Bottom Layer And Adhesive. Size 15 Cm X 20 Cm , Foam Dressing For Sacral And Other Pressure Sores Four Layer Dressing With Outermost Breathable Film, Moisture Control Layer And A Absorbant Layer 10 X 10 Cm , Silk Like Cloth Tape With Strong Adhesive 1.25 Cmx 9 Meters , Silicone Adhesive Tape Which Is Painless To Remove From The Skin . Size Of 2.5 Cm X 1.3 M , Silicone Adhesive Tape Which Is Painless To Remove From The Skin . Size Of 5 Cm X 1.3 M , Thromboembolism Prevention Stocking, Thigh To Ankle Level, Various Sizes For Patients In Icu, Immobile Patients. It Should Have Graduated Pressure Fit. Snug Fit. (L,M,S) (500 - M 50 - L 50 - S) , Artificial Dural Graft Non-Biological/ Synthetic, Biocompatible, Implantable, Artificial Dural Graft. Sewable To Normal Dura. Should Be Impervious To Fluid. For Permanent Implant. Should Lead To Minimal Adhesion Formation And Tissue Reaction. Expanded Polytetrafluoroethylene (Eptfe) Preferred. Size - Minimum 10 X 10 Cm , Artificial Dural Graft Non-Biological / Synthetic, Biocompatible, Implantable, Artificial Dural Graft. Sewable To Normal Dura. Should Be Impervious To Fluid. Material Should Be Absorbable (Like Poly L Lactic Acid) And Biomimetic Microstructure For Tissue Regeneration.For Permanent Implant. Should Lead To Minimal Size Minimumadhesion Formation And Tissue Reaction. Size Minimum 10X10 Cm , Reactive Polymer Based Multilaminate Adhesive Film For Protecting Dural Suture Line From Csf Leak, Which Is Biocompatible And Slowly Resorbed. Should Adhere To Dural Surface By Electrostatic Interaction. Less Than 50 X 50Mm Size Sterile Ready To Use , Reactive Polymer Based Multilaminate Adhesive Film For Protecting Dural Suture Line From Csf Leak, Which Is Biocompatible And Slowly Resorbed. Should Adhere To Dural Surface By Electrostatic Interaction.More Than 50 X 50Mm Size Sterile Ready To Use , Soft Nasal Pack With Breathing Hole After Endoscopic Nasal Surgery (Polyvinylalcohol Material) , Soft Nasal Pack Without Breathing Hole After Endoscopic Nasal Surgery (Polyvinylalcohol Material) , Foley Catheter With Antibacterial Coating Of Gold, Palladium And Silver Which Should Act By Virtue Of A Galvanic Effect Inhibiting Biofilm Formation.Silicone . [100% Pure Silicone, 2 Way Bulb]Exact Sizes And Quantities Required Will Be Mentioned At The Time Of Purchase Order And Hence Please Quote A Uniform Price For All Available Sizes Ranging From 6F To 18 F. The Product Should Have Randomized Controlled Data To Show That It Reduces Urinary Tract Infection , Foley Catheter With Antibacterial Coating Of Gold, Palladium And Silver Which Should Act By Virtue Of A Galvanic Effect Inhibiting Biofilm Formation.[Latex With 2 Way Bulb]Exact Sizes And Quantities Required Will Be Mentioned At The Time Of Purchase Order And Hence Please Quote A Uniform Price For All Available Sizes Ranging From 6F To 18 F. The Product Should Have Randomized Controlled Data To Show That It Reduces Urinary Tract Infection , Silicone Balloon Catheter For Intracranial Neuroendoscopy 3 Or 4 F (Fogarty Catheter) , Neurosurgical Patties Sterile, Ready To Use Cotton Patties, In Sterile Packaging. Size7x2 Cm, Each Pack Should Contain At Least 10 Patties , Neurosurgical Patties Silicone Transparent, Threaded Radio-Opaque. , Perforator Adult Size With Plunge Guard (Single Use, Disposable) Perforator With Inherent Mechanism To Stop A Plunge Once Dura Is Reached. Should Be Compatible With Hudsons Brace Available In Jipmer. If Not, You Must Provide A Compatible Hudson Brace For Every 100 Units Placed. , Perforator Pediatric Size With Plunge Guard (Single Use, Disposable) Perforator With Inherent Mechanism To Stop A Plunge Once Dura Is Reached. Should Be Compatible With Hudsons Brace Available In Jipmer. If Not, You Must Provide A Compatible Hudson Brace For Every 100 Units Placed. , Perforator Adult Size With Plunge Guard (Reusable, Sterilizable) Perforator With Inherent Mechanism To Stop A Plunge Once Dura Is Reached. Should Be Compatible With Hudsons Brace Available In Jipmer, Otherwise Brace To Be Provided Free Of Cost For Every Hundred Units Placed. , Perforator Pediatric Size With Plunge Guard (Reusable, Sterilizable) Perforator With Inherent Mechanism To Stop A Plunge Once Dura Is Reached. Should Be Compatible With Hudsons Brace Available In Jipmer, Otherwise Brace To Be Provided Free Of Cost For Every Hundred Units Placed , Ventriculoperitoneal Shunt [Adult Size, Pressure: High/Medium/Low] Burr Hole Design Of Dome Chamber And Valve With Diaphragm Type Valve. Chamber Should Sit On The Burr Hole Which Allows Aspiration Of Csf If Required. Biocompatible Material. The Part That Is Placed On The Burr Hole Should Have A Low Profile (Very Important). Valve Seating Interface Of Dissimilar Polymers. Valve Seating Interface Of Dissimilar Polymers (Will Be Rejected If It Is Not A Burr Hole Design Or If The Chamber Is Not Low Profile) .(High - 25 M - 100 Low - 25) , Ventriculoperitoneal Shunt [Paediatric Size, Pressure: High/Medium/Low] Burr Hole Design Of Dome Chamber And Valve With Diaphragm Type Valve. Chamber Should Sit On The Burr Hole Which Allows Aspiration Of Csf If Required. Biocompatible Material. The Part That Is Placed On The Burr Hole Should Have A Low Profile (Very Important). Valve Seating Interface Of Dissimilar Polymers. Valve Seating Interface Of Dissimilar Polymers (Will Be Rejected If It Is Not A Burr Hole Design Or If The Chamber Is Not Low Profile)(High - 25 M - 100 Low - 25) , Ventriculo Peritoneal Shunt Chabra Split Valve Type Adult; The System Should Be Supplied Complete With A Ventricular Catheter Around 15 Cm Long, A Unitized Shunt Aassembly With A Distal Catherter And Two Straight Connectors In Peel-Open Packs. The Pack Can Be Sterlized By Eto.(High 10, Medium 50 Low 10) , Ventriculo Peritoneal Shunt Chabra Split Valve Type Pediatric; The System Should Be Supplied Complete With A Ventricular Catheter Around 15 Cm Long, A Unitized Shunt Aassembly With A Distal Catherter And Two Straight Connectors In Peel-Open Packs. The Pack Can Be Sterlized By Eto. (High 10,Medium 50 Low 10) , Ventriculoperitoneal Shunt Antibacterial [Medium Pressure, Adult / Paediatric Size] Antibacterial Agents Should Be Incorporated Within Substance Of The Shunt Material [Not Coated] Which Elutes To The Outside Of The Shunt As Well As Within Lumen To Reduce Chances Of Shunt Infection; Two Different Antibiotic Agents Should Be Impregnated. The System Should Be Supplied Complete With A Ventricular Catheter Around 15 Cm Long, A Unitized Shunt Aassembly With A Distal Catherter And Two Straight Connectors In Peel-Open Packs. The Pack Can Be Sterlized By Eto. (Adult - 20 Paediatric - 20) , Ventriculoperitoneal Shunt With An Antisiphon Device Built Into It (Two Ball Design); The System Should Be Supplied Complete With A Ventricular Catheter Around 15 Cm Long, A Unitized Shunt Aassembly With A Distal Catherter And Two Straight Connectors In Peel-Open Packs. The Pack Can Be Sterlized By Eto. , Ventriculoperitoneal Shunt With An Antisiphon Device Built Into It (Three Ball Design); The System Should Be Supplied Complete With A Ventricular Catheter Around 15 Cm Long, A Unitized Shunt Aassembly With A Distal Catherter And Two Straight Connectors In Peel-Open Packs. The Pack Can Be Sterlized By Eto. , Ventriculoperitoneal Shunt With An Antisiphon Device Built Into It (Four Ball Design); The System Should Be Supplied Complete With A Ventricular Catheter Around 15 Cm Long, A Unitized Shunt Aassembly With A Distal Catherter And Two Straight Connectors In Peel-Open Packs. The Pack Can Be Sterlized By Eto. , Y Connector For Ventriculoperitoneal Shunt Which Can Be Attached To A Shunt To Drain A Loculation Or A Separate Cyst , Antibacterial External Ventricular Drainage Catheter. Antibacterial Agents Should Be Incorporated Within Substance Of The Catheter Which Is Placed In Brain To Drain Csf [Not Coated] Which Elutes To The Outside Of The Catheter And Within Lumen To Prevent Infection; Two Different Antibiotic Agents Should Be Impregnated. Should Be Translucent With Depth Markings. , Programmable Ventriculoperitoneal Shunt With External Programming Device For Use In Normal Pressure Hydrocephalus, 10 Mm Pressure Increment Settings. Programming Device Should Be Made Available In Jipmer As And When Requested With 24 Hour Prior Notice (Email Or Phone Call) , Programmable Lumboperitoneal Shunt With External Programming Device For Use In Normal Pressure Hydrocephalus, 10 Mm Pressure Increment Settings. Programming Device Should Be Made Available In Jipmer As And When Requested With 24 Hour Prior Notice (Email Or Phone Call) , Microsensor Transducer (Single Use, Disposable) For Monitoring Intracranial Pressure In The Brain Parenchyma (It Should Be Compatible With Available Monitor In Jipmer Or A Monitor Supplied Free Of Cost With The Reusable Microsensor Transducer Cable) The Cable Should Relay Information Electronically Rather Than Through A Hydrostatic Column Or Fiberoptics. , Ventricular Catheter And Pressure Transducer For Icp Monitoring Compatible With The Above Monitor (Or With Any Available Monitor In Jipmer Or A Monitor Supplied Free Of Cost With The Ventricular Catheter And Pressure Transducer) And Microsensor Cables , Single Use Transducer Cable (Parenchymal Or Subdural Or Ventricular) Compatible With The Icp Monitor That You Have Quoted In The Non-Consumable Section. , Implantable Ommaya Reservoir System Implantable Ommaya Reservoir System Of Two Different Sizes With Ventricular Catheter. Capable Of Tapping From Reservoir Percutaneously Or For Instilling Drugs , Lumboperitoneal Shunt System Implantable Lumbo Peritoneal Shunt System With Touhey Needle And Connectors , Lumbar Drain Set , External Ventricular Drainage System Which Should Include Ventricular Catheter, Connecting Tubes, Leak Proof Drainage Bag With Volume Markings And Built In Csf Pressure Scale {In A Sterile And Ready To Use Pack.} , Gigli Saw Wire Cutter For Craniotomy Should Not Fray/Break On Using. Sterilizable. Small Round Low Profile Loops At Either End. [Identical Sample Should Be Provided Before Selection] , Polypropylene Monofilament Suture Of Size 8-0 With Atraumatic Swaged Needle , Double Armed , Polypropylene Monofilament Suture Of Size 10-0 With Atruamatic Swaged Needle For Microvascular Anastamosis , Double Armed , Fibrin Sealant/Glue - Glue For Use In Neurosurgery To Prevent Csf Lead Based On Fibrin Coagulum Formed On Mixing Fibrinogen , Thrombin And Synthetic Aprotinin Components In Easy To Apply Chamber And Nozzle System. Dual Tip Syringe System And Vials With Sterile Water For Reconstitution Should Be Part Of The Package. Total Quantity Should Be At Least 1 Ml After Generation Of Fibrin. Components, If Derived From Pooled Or Single Donor Human Blood Should Be Free From All Known Pathogens. (Any Agitating/Warming Device Required To Mix The Glue Should Be Provided During Use And Kept In Neurosurgery Ot ) , Hemostatic Activated Regenerated, Oxidised Cellulose For Intraoperative Hemostasis In A Powder Form (3G) Which Can Be Put In An Operative Cavity Using A Sterile Applicator In Manually Activated Pump , Hemostatic, Activated Regenerated Cellulose For Intra-Operative Hemostasis In Mesh Form , Hemostatic Activated Regenerated Cellulose For Intraoperative Hemostasis In Fibrillar Form In Aluminium Package To Protect From Heat, Light And Moisture. Should Have Us Fda Or Ce Or Equivalent Indian Standards. There Should Be Published Animal Or Human Studies For Clinical Efficacy. , Injectable Hemostatic Agent Prefilled Syringe With Haemostatic Matrix Agent With Human Thrombin And Calcium Chloride For Intraoperative Use.5 Ml , Cranioplasty Material Using Heat Mouldable High Density Porous Polyethylene Material With Pore Size Of 100 Microns Or Less For Tissue Integration. Size 12 X 17 Cmof 6 Mm Thickness. , Customized Craniomaxillary Repair System Using Peek Material Which Can Be Implanted. The Material Should Be Fabricated According The Ct Scan Reconstruction Data Of A Particular Patient. Quote Per Milliliter Volume Of The Material , Customized Craniomaxillary Repair System Using Titanium Material Which Can Be Implanted. The Material Should Be Fabricated According The Ct Scan Reconstruction Data Of A Particular Patient. Quote Per Milliliter Volume Of The Material , Customized 3 D Printed Rigid Model Based On Ct Or Mri Data Of Particular Patient For Planning Operative Approach. Should Include Soft Tissue Structures And Fine Structures Like Vessels, And Internal Architecture Of Temporal Bone. Price Should Be Mentioned Per Ml (Cm3) Of Final Product. Quote Per Milliliter Volume Of The Material , Customized 3 D Printed Rigid And Flexible Model Based On Ct Or Mri Data Of Particular Patient For Planning Operative Approach. Should Be Include Soft Tissue Structures And Fine Structures Like Vessels, And Internal Architecture Of Temporal Bone. Price Should Be Mentioned Per Ml (Cm3) Of Final Product. Quote For Milliliter Volume Of The Material , Injectable Hemostatic Agent Prefilled Syringe With Haemostatic Matrix Agent With Human Thrombin And Calcium Chloride For Intraoperative Use.6-10 Ml , Bone Wax Easily Squashable, Bone Wax For Sealing Bleeding Bone Edges, Sterile And Ready To Use In Tear Open Packages. Should Not Stick To Glove. , Cranial Mapper - Disposable Malleable Ct Scan-Based Cranial Mapper For Armless, Frameless Intraoperative Localization For Doing Cranial Surgery. , Open-Door Laminoplasty System (Titanium) - It Should Offer Intraoperative Adaptability Through Expansive Plate Options; Instrumentation Should Be Provided For The Surgeries With Various Screws Options. Quote For The Set Of Single Level Plate, And Four Screws. , Cervical Titanium (Disc) Spacer With Sharp Teeth And Graft Packing Window Along With Varous Size Options. Should Have An Anatomical Shape To Promote Maintanance Of Cervical Lordosis. Instrumentation Should Be Provided For The Surgeries. , Cervical Peek (Disc) Spacer With Sharp Teeth And Graft Packing Window Along With Varous Size Options In Polyetheretherketone (Peek). Should Have An Anatomical Shape To Promote Maintanance Of Cervical Lordosis. Instrumentation Should Be Provided For The Surgeries. , Anterior Cervical Interbody Spacer (Titanium) With Integrated Fixation Screws. Spacer Should Have With Sharp Teeth And Graft Packing Window Along With Varous Size Options. Should Have An Anatomical Shape To Promote Maintanance Of Cervical Lordosis. Instrumentation Should Be Provided For The Surgeries. Titanium Spacer With Two Titanium Screws And One Integrated Locking Screw (1 Set) , Anterior Cervical Interbody Spacer (Peek Integrated With Titanium) With Integrated Fixation Screws. Spacer Should Have With Sharp Teeth And Graft Packing Window Along With Varous Size Options In Polyetheretherketone (Peek). Should Have An Anatomical Shape To Promote Maintanance Of Cervical Lordosis. Instrumentation Should Be Provided For The Surgeries. Peek And Titanium Integrated Spacer With Two Titanium Screws And One Integrated Locking Screw (1 Set) , Anterior Cervical Plate And Screws (Titanium) - Single Level; Anterior Cervical Plate System With Attached Locking Mechanism And Choice Of Fixed Angle Screws For Standard Cases Or Variable Angle Screws For Ease Of Implantation In Complex Cases. System Should Allow The Surgeon The Versatility Of Creating Fixed, Variable Or Hybrid Construct Intraoperatively. Plate Should Be 2.5Mm Thick. Plate Should Have Medial/Lateral Radius Of Curvature And Lordotic Radius Of Curvature. Instrumentation Should Be Provided For The Surgeries With Various Screws Options. Quote For The Set Of Single Level Plate, Four Screws And Two Integrated Locking Screws. , Anterior Cervical Plate And Screws (Titanium) - Two Level; Anterior Cervical Plate System With Attached Locking Mechanism And Choice Of Fixed Angle Screws For Standard Cases Or Variable Angle Screws For Ease Of Implantation In Complex Cases. System Should Allow The Surgeon The Versatility Of Creating Fixed, Variable Or Hybrid Construct Intraoperatively. Plate Should Be 2.5Mm Thick. Plate Should Have Medial/Lateral Radius Of Curvature And Lordotic Radius Of Curvature. Instrumentation Should Be Provided For The Surgeries With Various Screws Options. Quote For The Set Of Two Level Plate, Four Screws And Two Integrated Locking Screws. , Anterior Cervical Plate And Screws (Titanium) - Three Level; Anterior Cervical Plate System With Attached Locking Mechanism And Choice Of Fixed Angle Screws For Standard Cases Or Variable Angle Screws For Ease Of Implantation In Complex Cases. System Should Allow The Surgeon The Versatility Of Creating Fixed, Variable Or Hybrid Construct Intraoperatively. Plate Should Be 2.5Mm Thick. Plate Should Have Medial/Lateral Radius Of Curvature And Lordotic Radius Of Curvature. Instrumentation Should Be Provided For The Surgeries With Various Screws Options. Quote For The Set Of Three Level Plate, Four Screws And Two Integrated Locking Screws. , Expandable Cage (Titanium) - An Integrated Vertebral Body Replacement Device (Cervical, Thoracic And Lumbar) That Provides Anterior Column Support And Is Designed To Prevent Implant Dislodgement. The Spacer Should Have Integrated Titanium Plates And Screws For Additional Stabilization Between The Vertebral Bodies And The Spacer With An Integrated Locking Mechanism. The Implants Should Be Available In A Wide Range Of Footprints, Heights, And Lordotic/Kyphotic Angles In Titanium. Maximized Expansion Ranges And Modular Endplates Allow Surgeons To Customize Each Implant To The Patient. Instrumentation Should Be Provided For The Surgeries With Various Screw Options. Quote For The Set Of Cage, Four Screws, And Two Integrated Locking Screws. , Expandable Cage (Peek With Integrated Titanium) - An Integrated Vertebral Body Replacement Device (Cervical, Thoracic And Lumbar) That Provides Anterior Column Support And Is Designed To Prevent Implant Dislodgement. The Spacer Should Have Integrated Titanium Plates And Screws For Additional Stabilization Between The Vertebral Bodies And The Spacer With An Integrated Locking Mechanism. The Implants Should Be Available In A Wide Range Of Footprints, Heights, And Lordotic/Kyphotic Angles In Polyetheretherketone (Peek). Maximized Expansion Ranges And Modular Endplates Allow Surgeons To Customize Each Implant To The Patient. Instrumentation Should Be Provided For The Surgeries With Various Screw Options. Quote For The Set Of Cage, Four Screws, And Two Integrated Locking Screws. , C1 –C2 Joint Spacer(Titanium). Instrumentation Should Be Provided For The Surgeries With Various Size Options. Quote For The Set Of Two Spacers. , Multi-Axial Lateral Mass Screw Implants (Titanium) For Posterior Cervical Spine Fixation. These Multi-Axial Lateral Mass Screws Should Be Compatible With 3.2Mm And 3.5Mm Rods, Up To 45-Degree Angulations With Index Markers On Saddles To Easily Identify The 45-Degree Relief Notches, Along With 2.5Mm Hex Internal Buttress Threaded Set Screws. Instrumentation Should Be Provided For The Surgeries With Various Screw Options. Quote For The Set Of Two Screws And A Single Rod. , Lumbar Interbody Implant(Peek) For Use In Posterior Lumbar Interbody Fusion (Plif) Or Transforaminal Lumbar Interbody Fusion (Tlif) Procedures And It Should Be Compatible With Open, Mini Or Mast Technique Approaches. Implants Should Be Made Of Polyetheretherketone (Peek), Convex Shaped, Should Have Tantalum Markers, Tooth Like Surface And Bullet Tip. Implants Should Have Sterile Pack. Length 22Mm And Height 10Mm With Internal Graft Volume Of 0.5Cc. Posterior Instrumentation Should Be Provided At The Time Of Surgery , Adjustable Occipital Plate (Titanium) For Occipito Cervical Junction Surgery With Multiple Screw Holes To Accept 4.5 Mm, 5.0 Mm Occipital Bone Screws, Pre-Contoured Occipital Rods Or Occipital Adjustable Rods. Instrumentation Should Be Provided For The Surgeries With Various Screw Options. Quote For The Set Of One Plate, Two Rods, Six Occipital Screws And Locking Screws (Titanium). , Multiaxial Pedicle Screw (Titanium) - Multi Axial Titanium Pedicle Screws With Diameter Range Of 4.5 Mm, 5.5 Mm, 6.5Mm And The Lengths Ranging From 30Mm To 50 Mm With Buttress Threaded Break Off Set Screws To Secure The Rod In To The Head Of The Implant. Should Be Compatible With The 5.5Mm Rod System. Instrumentation Should Be Provided Along With The Rods And Various Sizes Of Screws For The Surgeries. Quote A Uniform Rate For A Construct Set Of Four Screws And Two Rods. (Do Not Quote For A Single Screw Or Rod). , Bone Substitutes This Should Be An Rhbmp-2 (Recombinant Human Bone Morphogenetic Protein-2) Formulation Combined With A Bovine-Derived Absorbable Collagen Sponge (Acs) Carrier. , Hydroxyapatitile Isothermic Bone Substitute Which Can Set In A Wet Field (10 Cc) , Medical-Grade Polyporous Resorbable Ceramic Granules With 15% Hydroxypatite+85% Beta-Tricalcium Phosphate. (10Cc) , Self Drilling Titanium Screws With Length Of 12 Mm,14 Mm,16 Mm , 18Mm For Anterior Cervical Plate Fixation - 1 Set (4 Screws). Instrumentation Should Be Provided For The Surgeries With Various Screws Options. Quote For A Set Of Four Screws. (12 Mm, - 20 Nos 14 Mm - 20 Nos 16 Mm- 20 Nos 18Mm- 20 Nos) , Philadelphia Type Neck Collars With Hole For Ventillation Through Tracheostomy Tube, Size: Large/Medium/Small(L - 25 M -50 S -25) , Halo Vest Halo Ring, Titanium Pins And Vest For Extended Immobilization Of Upper Cervical Spine. Custom Fit To Be Ensured As And When Necessary. System Should Be Mri Compatible With Minimal Imaging Artifacts. Tool Kit For Applying And Removing. Demonstration And Technical Assistance Required. , Synthetic Bone Paste Consists Of Pure Nanocrystalline Hydroxyapatite That Are Less Than 20 Nanometers In Size Embedded In A Matrix Of Sterile Water, With Osteoconductive Properties, Delivered In Syringe (5Cc) , Miniplate And Screw System For Fixing Bone Flap During Craniofacial Surgery. Quote For A Set Of A 16 Hole Plate (Profile Height 0.8 Mm) With 10 Self Drilling Screws (2.0 X 5 Mm) And One Emergency Screw (2.3 Mm X 6 Mm)(Self Drilling Nature And The Ease Of Application To Be Demonstrated). Each Colour Coded) Minor Variation In Dimension Acceptable , Self Tapping 1.5 Mm Screws With A Conical Core Design. The Screw Should Have A Reinforced Neck Allowing Improved Troque Transmission And Easy Removal. The Screw Head Profile Should Not Be More Than 0.6 Mm.Minor Variation In Dimension Acceptable , Dynamic Malleable Titanium Mesh Which Can Be Contoured Using A Mesh Bender. Thickness Should Be 0.3 Mm Profile Height. 120 X120 Mm Surface Area Minor Variation In Dimension Acceptable , Low Profile (0.5 Mm) Two Hole 16 Mm Bar Plate With Two Self Drilling Screws (1.5 X 5 Mm), Grade Ii Titanium. One Driver Should Be Provided On Loan Based For The Purpose Of Fixing The Screwsminor Variation In Dimension Acceptable , Low Profile (0.6 Mm)Two Hole 12 Mm Bar Plate With Two Self Drilling Screws (1.5 X 5 Mm), Grade Ii Titanium.One Driver Should Be Provided On Loan Based For The Purpose Of Fixing The Screws Minor Variation In Dimension Acceptable , Bone Flap Fixation System For Fixing Bone Flap Using Titanium Or Similar Biocompatible Material With Thin Profile, Preferably With Compressing Plates On Both Sides Of Burr Hole. Quote For One Clamp 11-16 Mm. All Instruments On Loan Basis. , Burr Hole Button For Cosmetic Occlusion Of Burr Holes With 3 Nos. Of Screws , Drape, Endoscopy Generaltiburon Surgical Drape Fabric Absorbent Impervious Reinforcement, 16 X 38 1/2 Two Clear Poly Troughs With Hook & Loop Closure, 11 1/8 X 30 Hook & Loop Cord-Holding Tabs Fenestration, 10 X 11 Armboard Covers , Craniotomy Drape Central Round Integrated Self Adhesive Transparent (Not Just Transcluscent) Area Of Diameter Greater Than 20 Cm, With Surrounding Flange, Tubing For Drainge Of Blood And Wash Fluid, Rest Of The Non-Woven Material Of The Drape Should Be Fluid Impermeable Of Dimensions 2X1.6 M. Capable Of Covering The Patients’ Torso. , Ventriculoperitoneal Shunt Drape For Ventricular Shunt Surgery Covering Head To Abdomen With Transparent Sticking Operation Site Plastic Incise Drape , Laminectomy Drape Water Resistant Drape With Central Iodine Impregnated Transcluscent Adhesive Patch Which Can Cover From Head To Toe For Laminectomy , Iodine Impregnated Adhesive Incise Drape With Paper Background , Face Mask With Shield : Surgeon Face Mask With Clear Plastic Visor Shield Built In, With Malleable Nose Clip, Latex Free. Should Prevent Aerosol Or Droplet Splash On Eyes. (Transparent Distortion Free Optical Characteristics, Crease Free Nature Of Visor Is Absolutely Important) , Microscope Drape Transparent Thin Sterile Microscope Drape For Use With Oh5 M720 Operating Microscope . The Drape Should Fit Properly[Sample To Be Provided To Assess Suitability] , Microscope Drape Transparent Thin Sterile Microscope Drape For Use With Moller Wedel Hir700 Neurosurgical Operating Microscope. The Drape Should Fit Properly[Sample To Be Provided To Assess Suitability] , Microscope Drape Transparent Thin Sterile Microscope Drape For Use Withf40 Leica Microscope. The Drape Should Fit Properly[Sample To Be Provided To Assess Suitability] , C Arm (Image Intensifier) Transparent Sterile Drape , Universal Camera Drape 18X250 Cms Telescopic Folding, Separate Tape Strip , Povidone Iodine Spray In Canisters For Preparing Surgical Site , Raney Clips [Plastic] , Liga Clips, Small & Medium (100 Each) , Catheter Mount For Ventilator (Maquet Ventilator Compatible) , Nibp Cuff Compatible With L&T Starplus And Galaxy Multiparameter Monitor (Adult Size) , Nibp Cuff Compatible With L&T Starplus And Galaxy Multiparameter Monitor (Pediatric Size) , Nibp Cuff Compatible Withwipro Ge B450multiparameter Monitors (Double Tubing) - Adult Size , Nibp Cuff Compatible Withwipro Ge B450multiparameter Monitors (Double Tubing) - Pediatric Size , Spo2 Sensor And Cable Compatible With L&T Starplus And Galaxy Multiparameter Monitors , Spo2 Sensor And Cable Compatible With Wipro Ge B450multiparameter Monitors , 3 Lead Ecg Cable Button Ends Detachable Compatible With Starplus, Galaxy, And Wipro Ge B450 Monitors , Nibp Hose Assembly Compatible With Wipro Ge B450 Monitors , Oxygen Mask With Connection Adaptor , O2 T Piece , Tracheal Mask With Connector , Non Invasive Oxygen Mask , Bacterial Filter (Compatible With Maquet Servo Ventilators In Neurosurgery I.C.U.) , Burette Set For Pediatric Iv Fluid Infusion , Transparent Contoured Tubular Retractor For The Brain To Do Endoscopic Or Microsopic Procdures. It Should Have Depth Marking, Holder To Put On A Retractor Arm, A Lockable Obturator Which Can Be Removed. The Length Should Be About 10 Cm (Plus Or Minus 1 Cm) And The Internal Diameter Should Be 20 Mm (Plus Or Minus 2 Mm) , Silicone Separator For Decompressive Craniectomy To Maintain A Plane For Future Cranioplasty. The Silicone Film Should Have A Thickness Of 1 To 1.5 Mm And Should Have Slits Or Perforations To Allow Fluid To Go Through. 15 X 20 Cm Size. , Sequential Pneumatic Compression Sleeve /Sheathfor Use In Dvt Prophylaxis. The Sleeve Should Be Upto Thigh Starting From Calf With Straps To Suit Lower Limb And Various Girths Should Be Washable And Reusable For A Single Patient. Should Be Compatible With The Kendall Pump Device Already Available With Us. , Patient Warming Blanket, Thermally Insulated Silver Coloured For Use With Warming Air System Adult Size (Must Be Compatible With Currently Available Warmer In Jipmer Neurosurgery , Patient Warming Blanket, Thermally Insulated Silver Coloured For Use With Warming Air System Pediatric Size (Must Be Compatible With Currently Available Warmer In Jipmer Neurosurgery , 4-Contact, Strip, Eeg Subdural Electrode.Platinum, 4Mm Dia With 10Mm Spacing Between Contacts, Withconnector Blocks (10 Nos / 1 Box) And Compatible Cable , 6-Contact, Strip, Eeg Subdural Electrode.Platinum, 4Mm Dia With 10Mm Spacing Between Contacts, Withconnector Blocks (10 Nos / 1 Box) And Compatible Cable , 6-Contact Depth Electrode.Platinum With 10Mm Spacing Between Contacts, Withconnector Blocks (10 Nos / 1 Box) And Compatible Cable , 24 Contacts 4X6 Multi-Stripsubdural Implantable Eeg Electrode Series With Connector Blocks And Cables , Depth Implantable Stereotactic Eeg (Stereo-Eeg) Electrode 4 Contact(1*4)Depth Implantable Eeg Electrode (Platinum / Iridium Contact) With Anchor Bolt Cap. Ring Contact Size Of 2 Mm. Outer Diameter Should Be 0.8 Mm Or Less , Depth Implantable Stereotactic Eeg (Stereo-Eeg) Electrode 8 Contact Depth Implantable Eeg Electrode (Platinum / Iridium Contact) With Anchor Bolt Cap. Ring Contact Size Of 2 Mm. Outer, Distal Diameter Should Be 0.8 Mm Or Less , Guidance Screw, 20 Mm For Stereo-Eeg Electrode, Compatible With The Electrodes Mentioned Above , Guidance Screw, 25 Mm For Stereo-Eeg Electrode, Compatible With The Electrodes Mentioned Above , Guidance Screw, 30 Mm For Stereo-Eeg Electrode, Compatible With The Electrodes Mentioned Above , Extension Cable For 4 Contact Stereo-Eeg Electrode , Extension Cable For 5 Contact Stereo-Eeg Electrode , Extension Cable For 8 Contact Stereo-Eeg Electrode , Extension Cable For 10 Contact Stereo-Eeg Electrode , Extension Cable For 18 Contact Stereo-Eeg Electrode , Cleaning And Lubricant Solution For Electric Drill, Based On Food Grade Mineral Oil And Propellant Base (Pana Spray Or Equivalent). 500 Ml Can , Instrument Lubricant Concentrate, With Antimicobial Activity, 50Ml Capacity , Flexometallic Electromyography (Emg) Endotracheal Tube For Intraoperative Nerve Monitoring ] Quote A Uniform Price For Sizes From 6 To 9 Mm Diameters. Exact Quantitiess Of Each Type Required Will Be Mentioned In The Purchase Order (6Mm-5, 6.5Mm-20, 7Mm-20,7.5Mm-20,8Mm-10) , Endotracheal Tube With Low Pressure Low Volume Cuff And A Subglottic Aspiration Catheter Port Which Should Be Above The Cuff. The Cuff Should Be Shaped And Tapered In Such A Way That Secretions Accumulate In The Zone Between Tube And The Tapered Cuff To Prevent Microapiration. (Sizes 6.0 To 8.5) (6 - 50 6.5 -200 7.0 - 200 7.5 - 200 8 - 50 8.5 - 50) , Tracheostomy Tube With Low Profile Low Pressure Cuff With An Aspiration Catheter Port Which Help Aspirate Subglottic Secretions Above The Level Of The Cuff. The Cuff Should Be Shaped In Such A Way That Secretions Accumulate In The Zone Between Tube And Cuff. (6.5 - 100 7.0 - 100 7.5 - 100 8.0 -100) , Bougie For Endotracheal Tube Exchange (Tracheal Tube Introducer) , Outer Diameter 5.0Mm Length 700Mm Straight Tip, Reusable , Bougie For Endotracheal Tube Introduction For Difficulty Airway (Tracheal Tube Introducer) , Outer Diameter 5.0Mm 600Mm Length Coude Tip, Resuable , Indocyanine Green Dye For Microscope Integrated Video Angiography During Aneurysm Clipping 25 Mg Vials , Monopolar Hand Pieces Controllable By Both Hand Piece And Foot Switch Which Is Disposable (Compatible With Excel, Mallis And L&T Bipolar Machines) , Monopolar Microdissection Needle With 5 Micron Tungsten Tip For Precision Electrosurgery , Flexible Patient Contact Plate (Compatible With Excel, Mallis And L&T Bipolar Machines), Reusable. , Expanded Poly Tetraflouroethylene Eptfe (Teflon Patch) 0.4 Mm For Use In Microvascular Decompression. 1 X 1 Cm Size , Container For Sending Pathological Biopsy (100 Ml Capacity) , Sub-Cortical Suction Stimulator For Stimulating Subcortical White Matter While Resecting Gliomas To Elicit A Motor Evoked Potential Response. Compartable With Tom Systems In Jipmer Neurosurgery , Intra-Arterial Drug Infusion Catheters Non Thrombogenic Coated Long Catheters Of 160-170 Cms Length With 0.015, 0.0165 Inches Internal Diameter To Be Used As Indwelling Intra-Arterial Catheter For Drug Delivery In Internal Carotid Artery Over A Prolonged Period Of Time (Up To 100 Hours). , Surgeon Gown (Medium Size) Which Is A Fully Wrap Around Variety And Can Be Tied In Front, With Water, Alcohol Resistance. Outer Layer Spun Bound Repellant Layer With Inner Two Layers With Antibacterial Property (Melt Blown), And Innermost Layer For Fabric Strength (Spun Bound) Soft Elastic Wrist Cuff. Adjustable Neck Line Needed. Low Linting. Sample Absolutely Required. Must Meet Or Exceed En13795 Standards Or Else Will Not Be Considered.Quote Separately For Tape Covered Double-Stitched Seam Type Gown As Well As The One With Ultrasound Bonded Seam , Surgical Gloves : Polyurethane Inner Coating With Textured External Surface And Dark Coloured To Prevent Reflective Glare. Internal Surface Should Have Powder Free, Polymer Coated And Siliconated,Protein Less Than 30Micro Gram And Preferrable Thickness At Finge Is 0.18Mm.(6.0 - 50 6.5 -200 7.0 - 200 7.5 - 200 8-200) , Surgical Under Glove: Internal Surface - Polyurethane Coated & Moisturized Hydrasoft Coated, Preferable Finger Thickness 0.19Mm, Teal Green Coloured And Gamma Sterilized. Size: 7.0 & 7.5 , Urinary Drainage Bag (Urometer) For Collection Of Urine From Foley Catheter With Volume Measurement Compartment Separate From Bag Lines For As Little As 50 Ml So That Hourly Urine Output Can Be Monitored, Non-Return Valve And Transparent. , Self Contained Double Lumen Suction Catheter Which May Be Used For Endotracheal Suctioning On Ventilated Patients With Plastic Envelope Containing Threadable And Retractable Soft Blunt Nosed Catheter. A Thumb Depressable Switch To Initiate And Stop Suctioning When Connected To Wall Suction. Rotating Access Valve To Isolate The Airway During Closed Position. Simultaneous Irrigation And Suctioning Should Be Possible (Mandatory Requirement). Must Have A Port To Attach An Mdi Adaptor Along With An Mdi Adaptor Labels For Days Of Use Or To Indicate When To Replace. For Multiple Use Over A Period Of 3 Days Or More. Demo Absolutely Mandatory Before Selection And If There Is Any Leak Or Suboptimal Performance On Testing It Will Be Rejected. (Size: 12 French : 25Cms & 45Cms, 14 French : : 25Cms & 45Cms) , Forehead Spo2 Sensor (Disposable) For Detecting Oxygen Saturation Reliably In Patients With Low Perfusion And Low Saturation With Accuracy Down To 60 %. Head Band Should Be Provided. If Cables Are Required That Should Be Provided Free Of Cost On Loan Basis. It Should Have A Four Layers Adhesive. , Operation Trolley Drape Made Of Fluid (Water And Alcohol) Impermeable Drape Of Size 1.5 X 1.5 M Size & 1.5 X 2 Mm (En13795 Standard) , Silicone Tracheostomy Tube, Cuffless With Obturator, Speaking Hole, Sizes Of 4, 6 And 8 , Silicone Tracheostomy Tube, Cuffled With Obturator, Speaking Hole, Size Of 4, 6 And 8 , Medical Grade Silicone Rubber (Addition Cure Type Silicone Rubber Adding 50:50 Of Part A And B). Either Colourless Or Skin Colour. Should Cure In 24 Hours Or Faster In Oven. 1 Kg. Equivalent Of Aditya Silicone Material Seen At This Link Https://Www.Adityasilicone.Com/Product/Aditya-Silicone-Rubber-Rtv-M-10-Body-Parts-1-Kg/ , Incentive Spirometer Which Shows Exact Volumes Per Minute. Should Have A Marker Which Indicates The Desirable Rate Of Inspiration. It Should Ensure That Patient Inhales Rather Than Exhales. Should Have A Port For Connecting Oxygen While In Use. Should Have A Bed Rail Holding Loop Built Into The Device. Flow Setting 500 Ml To 4000 Ml/Sec , Incentive Spirometer Which Shows Exact Volumes Per Minute. Should Have A Marker Which Indicates The Desirable Rate Of Inspiration. It Should Ensure That Patient Inhales Rather Than Exhales. Should Have A Port For Connecting Oxygen While In Use. Should Have A Bed Rail Holding Loop Built Into The Device.; Low Flow Setting 100 Ml To 600 Ml/Sec, Suitable For Pediatric Patients Or Patients With Poor Reserve. , Skin Stapler Remover , Non-Glutaradehyde Based Floor Cleaning Agent For The Intensive Care Unit Using A Quarternary Ammonium Compound And Non Intonic Surfactants. Surfactants Should Be Biodegradable According To Eu Detergent Guideline. A 0.5% Solution Should Have En 1276 Bactericidal Activity Even With High Soiling. Quote For One Liter Of Pure Solution Which Will Give A 0.5% Solution With En1276 Activity. , Non Glutaraldehyde Based Enzymatic Cleaner With Disinfiectant Cleaning Solution. Quote For 500Ml Pack , Tubular Elastic Dressing Made Of Cotton And Elastane For Tight Dressing Of Scalp. , Hepa And Carbon Filter For High-End Air Purifier In The Non Consumable Section(Lowest Quote Will Be Based On The Combined Value Of Machine And Filter) , Non Woven Cohesive Bandage Which Is Breathable And Stretcheable 10 Cm Breadth X 4 Meters. It Should Stick To Itself So That Bandaging Can Be Done Without Typing , Clipping Or Taping. , Scalp (Head) Decontamination Cap Impregnated With Polyhexamethylene Biguanid In Gel Form. , Non Ionic Amphoteric Surfactant Based Cleaning Agent For Insturments And Neuroendoscopes. It Should Be Compaticle For Use In Ultrasonic Baths. 1% Solution In 500 Ml Bottles , Disinfectant Wipes For Surface Cleaning To Be Used In Neurosurgery Ot & Icu. Disinfectant Should Contain Ethanol, 2- Propranalol And 1 Propranalol With 90Pull Outs (12 X12 Inches) Which Are Lint Free . Should Be Aldehyde Free. , Disinfectant Wipes For Surface Cleaning Ato Be Used In Neurosurgery Ot & Icu Nd For Cleaning Ultrasound Probes. Disinfectant Should Contain Didecyldimethyl Ammoniium Choride And Quarternary Ammonium Compounds Which Are Active Against Mrsa , Yeasts And Papova /Polyoma Viruses. 80 Or More Pull Outs 29X22 Cm Size Approximately , Water Less, Brush Less Surgical Hand Antiseptic Containing Chlorhexidine Gluconate (1%) And Ethylalcohol (61 % W/W). The Product Must Be Fda-Nda Approved For Use As Water Less Surgical Scrub. 500 Ml Bottles. , Body Decontamination Wipes Impregnated With Polyhexanide. One Pack Should Have 10 Wipes. , Alcohol Free Barrier Film That Can Be Sprayed On The Skin Which Acts By Forming An Impermeable Polymer Film. It Should Remain On Skin For 72 Hours. In 28 Ml Spray Bottle . , A Wearable, Wireless, Disposable, Vital Signs-Monitoring Device That Can Be Attached To The Patients Chest For At Least Five Days. It Should Be Powered By An In-Built Cell Like A Lithium Battery. It Should Pick Up At Least Two Lead Ecg, Heart Rate, Respiration Rate, Skin Temperature, Spo2, And The Patients Posture. Ingress Protection Should Be At Least Ip24. Weight Should Be Less Than 35 Grams. The Device Should Not Be Harmed By A Defibrillation Current If Used On The Patient. It Should Communicate With The Internet Using Wlan Or Blue Tooth Gateway Or Similar Technology To Give An Online Interface. The Vital Signs Should Be Displayed On A Web Page Accessible Using The Internet On A Desktop Computer Or Mobile Phone. The Vendor Should Set Up The Networking At The Place Where The Patient Is Wearing It, And It Should Have A Reach Of At Least 15 Meters. , 1)Non Rechargeable Implantable Neuro Stimulator(Mri Compatible ) : 1)Dual-Channel Implantable Neurostimulator For Use With Deep Brain Stimulation (Dbs) Leads, And Patient Programmer. Advanced Programming Features For Patients And Clinicians. A)Mri Campatible *, B)Number Of Defined Groups 1 To 4 C)Number Of Programs Per Group 1 To 4 D)Electrode Configurationb 1 To 4 Electrodes Per Lead As Anode, Cathode, Or Off E)Case Defined As Anode Or Off F)Amplitude (Voltage Mode) 0 To 10.5 V With 0.05 V Or 0.1-V Resolution G)Amplitude (Current Mode) 0 To 25.5 Ma With 0.1-Ma Resolution H)Amplitude – Upper Patient Limit By Hemisphere: I)Tracking Limit: +0 To +2 (0.2 Resolution); +2 To +4.5 (0.5Resolution) J)Amplitude – Lower Patient Limit By Hemisphere: K)Tracking Limit: -0 To -2 (0.2 Resolution); -2 To -4.0 (0.5Resolution); Full Rangec L)Pulse Width 60 To 450 ?S (10 ?S Resolution) M)Pulse Width – Upper Patient Limit Tracking Limit: +0 To +100 ?S (10-?S Resolution) N)Pulse Width – Lower Patient Limit Tracking Limit: -0 To -100 ?S (10-?S Resolution) O)Rate (Voltage Mode) 2 To 250 Hz (Resolution: 1 Hz From 2 Hz To 10 Hz, 5 Hzfrom 10 Hz To 250 Hz)D P)Rate (Current Mode) 30 To 250 Hz (5-Hz Resolution)Drate – Upper Patient Limit Tracking Limit: +0 To +50 Hz (10-Hz Resolution)Rate – Lower Patient Limit Tracking Limit: -0 To -50 Hz (10-Hz Resolution) Q)Softstart/Stop Off, On: 1, 2, 4, Or 8 Second Ramp Duration R)Cycling Off, On: 0.1 S To 24 Hr (Resolution: 0.1 S From 0.1 S To1 S, 1 S From 1 S To 59 S, 1 Min From 1 Min To 59 Min, 1 Hrfrom 1 Hr To 24 Hr), Non Rechargeable , 2)Rechargeable Implantable Neuro Stimulator (Mri Compatible ) : Dual-Channel Rechargeable Implantable Neurostimulator For Use With Deep Brain Stimulation (Dbs) Leads, And Dbs Patient Programmer And Patient Recharger System. Advanced Programming Features For Patients And Clinicians. A)Mri Campatible , B)Number Of Defined Groups 1 To 4B No More Than 16 Programs May Be Defined Within The 4 Groups. C)Number Of Programs Per Group 1 To 4B D)Electrode Configuration Up To 4 Electrodes As Anode, Cathode, Or Off E)Case Defined As Anode Or Off F)Amplitude (Voltage Mode) 0 To 10.5 V With 0.05 V Or 0.1-V Resolution G)Amplitude (Current Mode) 0 To 25.5 Ma With 0.1-Ma Resolution H)Amplitude – Upper Patient Limit By Hemisphere: I)Tracking Limit: +0 To +2 (0.2 Resolution); +2 To +4.5 (0.5Resolution) J)Amplitude – Lower Patient Limit By Hemisphere: K)Tracking Limit: -0 To -2 (0.2 Resolution); -2 To -4.0 (0.5Resolution); Full Rangec L)C Full Range = -10.5 V (Voltage Mode); -25.5 Ma (Current Mode) M)Pulse Width 60 To 450 ?S (10-?S Resolution) N)Pulse Width – Upper Patient Limit Tracking Limit: +0 To +100 ?S (10-?S Resolution) O)Pulse Width – Lower Patient Limit Tracking Limit: -0 To -100 ?S (10-?S Resolution) P)Rate (Voltage Mode) 2 To 250 Hz (Resolution: 1 Hz From 2 Hz To 10 Hz, 5 Hzfrom 10 Hz To 250 Hz)D Q)D Rate Limited To 125 Hz When Two Programs Are Active On A Single Lead. R)Rate (Current Mode) 30 To 250 Hz (5-Hz Resolution)D S)Rate – Upper Patient Limit Tracking Limit: +0 To +50 Hz (10-Hz Resolution) T)Rate – Lower Patient Limit Tracking Limit: -0 To -50 Hz (10-Hz Resolution) U)Softstart/Stop Off, On: 1-, 2-, 4-, Or 8-Second Ramp Duration V)Cycling Off, On: 0.1 S To 24 Hr (Resolution: 0.1 S From 0.1 S To1 S, 1 S From 1 S To 59 S, 1 Min From 1 Min To 59 Min, 1 Hrfrom 1 Hr To 24 Hr), Rechargeable , 3)Patient Programmer A)Allows Patients With Neurostimulators To Check Therapy And Neurostimulator Battery Status, And Adjust Settings Or Change Programming Group According To Clinician-Determined Parameters. 1. Patient Programmer Technical Specifications: A)Power Source 2 Aaa Alkaline Batteries (Non-Rechargeable, Lr03) B)Operating Temperature +9 °C To +43 °C (+49 °F To+110 °F) C)Temperature Limitation -34 °C To +57 °C (-30 °F To+135 °F) D)Size Approximately 9.4 Cm X 5.6Cm X 2.8 Cm (3.7 In X 2.2 Inx 1.1 In)Weight, Including E)Batteries Approximately 111 G (3.9Oz.) F)Battery Life 2 Months (Average) For Alkaline Batteries G)Mode Of Operation Continuous , 4)Deep Brain Stimulation Leads : Quadripolar Leads For Delivery Of Electrical Impulses To The Target Region Of The Brain.One 4-Electrode Lead, For Use With Extension With In-Line Connector. Lead Electrodes 1.5 Mm, Spaces 0.5 Mm. Should Be Available In 28-Cm Length And 40-Cm Length. A) Linear Connector B) Lead Resistance: <100 Ohms C) Available In 28 Cm And 40 Cm D) Diameter: 1.27 Mm E) Distance From Tip Of Lead To First Electrode: 1.5 Mm F) Shape: Cylindrical G) Length Of Surface Electrode: 1.5 Mm H) Spacing Between Electrodes 1.5 Mm I) Spacing Between Electrodes 0.5 Mm , 5)Stretcheable Coil Dbs (Deep Brain Stimulation) Extension Dbs Stretch-Coiltm Lead Extension And Accessories To Connect Neurostimulator To Dbs Lead. A) The Extension Has Four Connectors On The Distal End And Eight Connectors On The Proximal End. The In-Line Distal End Connects To A Lead. The Proximal End Connects To A Neurostimulator. (Should Be Compatible To Earlier Mentioned Dbs Parts) B) Low Profile Connector , Lock To Prevent Migration Of Deep Brain Stimulation Leads When The Stylet Is Taken Off (Stimulator Lock) , Implantable Phrenic Nerve Stimulator System (Quote Price For Battery If It Comes With The System) , Implantable Programmable, Rechargeable Battery Compatible With The Phrenic Nerve Stimulator , Implantable Programmable, Non-Rechargeable Battery Compatible With The Phrenic Nerve Stimulator , Implantable Phernic Nerve Stimulator With Radiofrequency Receiver (Without Implantable Battery) , Implantable Diaphragm Pacing System (Fda Approved) , Implantable Hypoglossal Nerve Stimulator For Obstructive Sleep Apnea , Implantable Telemetry Device For Intracranial Pressure Monitoring. It Should Be Capable Of Sending Pressure Readings For More Than 30 Days. Should Be Fda Or Similar Agency Approved. , Vagal Nerve Stimulator For Intractable Epilepsy. All Material For Implantation And Required Training Or Certification, If Any Should Be Provided For 2 Surgeons. , Cusa (Ultrasonic Dissector) Tips : Quote For Cusa Tips Of Various Sizes.It Should Be Compatible With Existing Cusa (25 Khz Ultrasonic Bone Removal Device, Model: Sonopet, Make : Stryker) Available In Neurosurgery Ot. If Not Compatible With This Machine, You Must Provide The Machine On Loan Basis. Quote A Uniform Rate For A Tip If Possible.We Will Inform The Size Of The Tip At The Time Of Placing Order. , Cusa (Ultrasonic Dissector) Tips : Quote For Cusa Tips Of Various Sizes.It Should Be Compatible With Existing Cusa (34 Khz Ultrasonic Bone Removal Device, Model: Sonopet, Make : Stryker) Available In Neurosurgery Ot.If Not Compatible With This Machine, You Must Provide The Machine On Loan Basis.Quote A Uniform Rate For A Tip If Possible.We Will Inform The Size Of The Tip At The Time Of Placing Order. , Cusa (Ultrasonic Dissector) Bone Removing Tips : Quote For Cusa Tips Of Various Sizes.It Should Be Compatible With Existing Cusa (Ultrasonic Bone Removal Device, Model: Sonopet, Make : Stryker) Available In Neurosurgery Ot. , Ultrasonic Dissector Tubings : Quote For Disposable Cusa Tubingof Various Sizes.It Should Be Compatible With Existing Cusa (Ultrasonic Bone Removal Device, Model: Sonopet, Make : Stryker) Available In Neurosurgery Ot. , Drill Bits : Quote For Round Fluted Burs Of Various Sizes, Round Diamond Burs Of Various Sizes.Should Be Caompatible With Long And Short Hand Pieces Of Medronic Neuro Drill Available In Neurosurgery Ot.Quote Separate Prices For Individual Types , Drill Bits : Quote For Round Fluted Burs Of Various Sizes, Round Diamond Burs Of Various Sizes.Should Be Caompatible With Long And Short Hand Pieces Of Karl Storz Endoscopic Drill Available In Neurosurgery Ot.Quote Separate Prices For Individual Types , Toner (Original Manufacturers ) For Canon Laser Printer (Canon Imageclass Mf-4820D Monochrome Multifunction Laser ) Which Is Compatible With The Laser Printers In Dept Of Neurosurgery. (Please Confirm With Dept Before Quoting) , Toner (Original Manufacturers ) For Lexmark Laser Printer (Lexmark Multifunction Laser ) Which Is Compatible With The Laser Printers In Dept Of Neurosurgery. (Please Confirm With Dept Before Quoting) , Toner (Original Manufacturers ) For Brother Laser Printer ( Model Hl - 22 ) Which Is Compatible With The Laser Printers In Dept Of Neurosurgery. (Please Confirm With Dept Before Quoting) , Titanium Clip That Fixes Onto The Diploe Of The Bone Flap Using A Driver. The Clip Should Be Able To Take A 1.5 Mm Self Tapping Screw To Attach To The Rest Of The Skull To Allow Rigid Fixation Using Three Such Clips. , Absorbable Cranial Fixation System,Length Around 10Mm , Microdoppler Probe (Single Use, Disposable) 8 Mhz 2 Mm Tip For Intraoperative, Endonasal Use Compatible With Mizhuo Machine Available In Our Theater. , Microdoppler Probe (Single Use, Disposable) 20 Mhz 0.8 Mm Tip For Intraoperative Use Compatible With Mizhuo Machine Available In Our Theater. , Uniportal Endoscopic Carpal Tunnel Release Set (Disposable Single Use). Should Have Blades (Standard And Slimline) Assembly. Disposable Blade Assembly Should Feature A Retractable Blade That Rises Straight Up Without Curving Outward. Blade Assembly Should Click- Lock On To The Front Of The Pistol-Grip Hand Piece”. Should Have Blade (Standard And Slim) Assembly, Three Sizes Hamate Finders, Synovial Elevators. Must Provide Endoscope On Loan Basis On A 48 Hour Notice Period Before Scheduled Day Of Surgery If Endoscope Is Not Available/Functioningat Jipmer , Reflective Sphere Suitable For Neuronavigation (Stealth S7, Medtronic, Glions) , Disposable Head Pins With Radiolucent Base Which Will Fit Into Radiolucent Head Holders Like That Of Doro And Medtronic , Non Consumables ( Items Costing Upto Rs.2,00,000/- Only) , Twist Hand Drill : Hand Held Twist Drill Set With Chuck, Drill Bits Of Various Sizes [10 Nos.] , Brain Cannula [Ventriculostomy Cannula] : Opening In The Tip, With Obturator [Stylet] , Leyla Detachable Retractors Holding Rod With Coupling Head( For Fixing Flexible Arms) With Ball And Socket Joint (For Fixing With The Ot Table Side Railings)-To Be Compatible With Jipmer Neurosurgery Ot Table , Leyla Flexible Arms : Flexible Arms Compatible With Both Mayfield And Sugita Head Frame Systems. Must Be Stable Once Locked And Flexible In All Three Dimensions Once Unlocked.This Feature Will Be Tested During Demo And If The Quality Is Not Satisfactory Sample Will Be Rejected , Micro Suction Regulator : Should Be Attached With Suction Tube And To Be Controlled By The Surgeon , Silicone Pediatric Head Holder : Pediatric Silicone Head Fixation System For Use With Doro System And Integra System , Air Bed (Air Mattress) To Prevent And Treat Bed Sores. High Quality With Cpr Compatible Deflation Valve, Multibarelled Type.Each Barrel Should Be Detached Individually(Each Barrel Should Be Replaceable Separately) We Will Reject Non -Barrel Type , Artery Forceps [Dandy’ Artery Forceps Which Have A Right Angle Curve Are Preferred] , Fish Hooks With Spring To Retract Scalp Flap During Craniotomy , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With Excell Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.5Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With Excell Machine Along With Cable (Demo Required)Working Lengthmore Than 10 Cm , Tip 0.5Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With Excell Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip0.7Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With Excell Machine Along With Cable (Demo Required)Working Lengthmore Than 10 Cm , Tip 0.7Mm , Bipolar Forceps Bayoneted (Concorde Tip Up, Non Stick, Compatible With Excell Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.7Mm , Bipolar Forceps Bayoneted (Concorde Tip Down, Non Stick, Compatible With Excell Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.7Mm , Yasargil Type Spring Rebound Ceramic Covered Tip Bipolar Cum Dissecting Forceps Working Length Around 8 Cm , Yasargil Type Spring Rebound Ceramic Covered Tip Bipolar Cum Dissecting Forceps Working Length Around 12 Cm , Suitable Tray For Storage And Sterilisation For All The Above Bipolar Forceps With Silicon Cushion Mat , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible Withmallis Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.5Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With Mallis Machine Along With Cable (Demo Required)Working Lengthmore Than 10 Cm , Tip 0.5Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With Mallis Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip0.7Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With Mallis Machine Along With Cable (Demo Required)Working Lengthmore Than 10 Cm , Tip 0.7Mm , Bipolar Forceps Bayoneted (Concorde Tip Up, Non Stick, Compatible With Mallis Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.7Mm , Bipolar Forceps Bayoneted (Concorde Tip Down, Non Stick, Compatible With Mallis Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.7Mm , Suitable Tray For Storage And Sterilisation For All The Above Bipolar Forceps With Silicon Cushion Mat , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With L&T Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.5Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With L&T Machine Along With Cable (Demo Required)Working Lengthmore Than 10 Cm , Tip 0.5Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With L&Tmachine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip0.7Mm , Bipolar Forceps Bayoneted (Standard Tip Non Stick, Compatible With L&Tmachine Along With Cable (Demo Required)Working Lengthmore Than 10 Cm , Tip 0.7Mm , Bipolar Forceps Bayoneted (Concorde Tip Up, Non Stick, Compatible With L&T Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.7Mm , Bipolar Forceps Bayoneted (Concorde Tip Down, Non Stick, Compatible With L&T Machine Along With Cable (Demo Required)Working Lengthless 10 Cm , Tip 0.7Mm , Karlin Cervical Curette. Black Rectangular Handle With Bayyonetted Design. 241 Mm Long. Medium Size , Forward Angle. Exact Size Will Be Mentioned In Purchase Order. Quote One Price For All Sizes. , Suitable Tray For Storage And Sterilisation For All The Above Bipolar Forceps With Silicon Cushion Mat , Friedman Micro Ronguer. Around 15 Cm Long Tip 1.5 Mm Straight , Friedman Micro Ronguer. Around 15 Cm Long Tip 1.5 Mm Curved , Micro Rongeur K-Bayonet, 180Mm (70Mm Working Length), Curved Tip (Kamiyama K-700) Please See Example At This Link: Https://Www.Takayamamicro.Com/Microsurgical-Instruments/Kamiyama-Micro-Rongeur-K-Bayonet-180Mm-70Mm-Wl-Slight-Curve-Tip , Micro Rongeur K-Bayonet, 200Mm (90Mm Working Length), Straight Tip Pin: Kt-701 Kamiyama - Tsuboi Micro Rongeur Has Fine Nose Shape. , Micro Rongeur K-Bayonet, 200Mm (90Mm Working Length), Slightly Curved Tip Pin: Kt-702 Kamiyama - Tsuboi Micro Rongeur Has Fine Nose Shape. , Microforceps K-Bayonet, 180Mm (70Mm Working Length) 45 Degree, 1.5Mm Tip / Pin: K-8220 , Lempert Ronguer 190 Mm(Quote Same Price For Straight And Curved. The Shape Will Be Mentioned In Purchase Order , The Sano Multi Angle Clip Applier For Applying Slimline Sugita Clips . It Should Provide Flexibility In Clip Positioningwith Optimal Visibility Of The Operative Site. The Jointed Shaft And Apair Of Sockets, Housed In The Jaws Of The Applier, Should Allow The Clip To Be Held Through An Arc Of 320°. Adjusting Key Should Be Provided , Bipolar Coagulation Forceps And Tips, Monopolar Tips And Corresponding Cables Compatible With The Karl Storz Neuro-Endoscope System. (Demo Required) , High-End Room Air Purifier Woriking On The Basis Of Forced Air Through High Efficiency Particulate (Hepa) Filter And Activated Carbon Filter To Absorb Pollutants And Volatile Organic Compounds. Clean Air Delivery Rate (Cadr) Should Be 300 M3 Per Hour Or Better. Actual Measurement Of Particulate Pollutants Should Be Displayed. There Should Be Wifi Connectivity To Android Or Ios Devices To Send Information On Air Qualtiy.Ion Cluster Generation. For Icu Or Rooms , Ultrasonic Cleaning Machine For Delicate Microsurgical Instruments. 3 Liter Capacity Or Better. Should Fit Multiple Bayonetted Forceps And Aneurysm Clip Appliers (Atleast Five) Of Size Of 20 Cm Each. , Hair Clipping Machine That Can Be Sterilized Or Capable Of Using Sterile Disposable (Or Resterilisable) Blade Head. The System Should Be Chargeable And Usable Without Cord. Should Be Fda Approved. Handle Should Be Water Proof And Can Be Disinfected. Should Be Capable Of Atleast 40 Minutes Of Use After Charging. (Please Quote For 100 Clipper Heads Along With Machine). Should Be Able To Remove Scalp Hair Easily. , Upper Air Ultraviolet-C Disinfection System (For Icus And Operation Theaters). Shortwave Uv Radiation Peak At Or Around 253.7 Nm (Uv-C)(200-260 Nm Range) Louvres And Reflector Control The Distribution Of Uv-C At The Device Level And Above, Where People Are Not Usually Present, Surface Mountable On False Ceilings Should Comply With Iec 62471 Standard For Photobiological Safety. , Bayonet Dissecting Forceps Working Length Less Than 10Cm Tip 0.5Mm , Bayonet Dissecting Forceps Working Length Less Than 10Cm Tip 0.7Mm , Bayonet Dissecting Forceps Working Length More Than 10Cm Tip 0.5Mm , Bayonet Dissecting Forceps Working Length More Than 10Cm Tip 0.7Mm , Micro Needle Holder,Titanium, Diamond Dusted Jaw, 15Cm Straight , Micro Scissors For Microvascular Anastomosis, Round Handle, Straight Tip, Approximately 145Mm/5 ¾” Length, Titanium Made, Non Glair - Non Reflecting Surface. , Micro Dissecting Scissors For Microvascular Anastomosis, Round Handle, Curved Tip, Approximately 145 Mm/5 ¾” Length, Titanium Made, Non Glair - Non Reflecting Surface. , Micro Forceps For Microvascular Anastomosis, Jeweller Type 0.15Mm Tip, Approximately 110 Mm (4 -3/8”) Length, Titanium Made, Non Glair - Non Reflecting Surface. , Suture Tying Forceps For Microvascular Anastomosis, Curved With Plateau 0.3Mm Tip, Approximately 135 Mm/5-¼” Length, Titanium Made, Non Glair - Non Reflecting Surface. , Biemer – Muller Approximators For Microvascular Anastomosis, Straight, Jaw Opening 5 Mm, Jaw Length 9 Mm, Closing Force 25G-30G, Titanium Made, Non Glair - Non Reflecting Surface. , Biemer Applying Forceps For Microvascular Anastomosis, Without Catch, Approximately 140Mm/ 5-½” Length, Titanium Made, Non Glair - Non Reflecting Surface. , Biemer Vessel Clip For Microvascular Anastomosis, Jaw Opening 5Mm, Jaw Length 9Mm, Closing Force 20G-25G, Titanium Made, Non Glair - Non Reflecting Surface. , Reill Micro Needle Holder For Microvascular Anastomosis,Without Catch, Curved Tip, Approximately 150Mm/6” Length, Titanium Made, Non Glair - Non Reflecting Surface. , Ima Heparin Cannula For Microvascular Anastomosis, Malleable, 1.5Mm Tip Diameter, Titanium/Stainless Steel , Vessel Dilating Forceps For Microvascular Anastomosis, Angled, Approximately 10Cm Length, Tip Diameter 0.2Mm, Titanium Made, Non Glair - Non Reflecting Surface. , Wired Coaxial Ophtalmoscope Fixable On The The Wall With Coil Loop Wiring To Allow Upto 1.5 Meters Of Extension , Interferential Therapy And Tens :-Medium Frequency : 2 Khz & 4 Khz, Base Amf : 1 - 150 Hz, Spectrum Amf : 0 - 150 Hz, Spectrum Programmes : Linear, Trapezoidal, Non Linear.Spectrum Time : 6 Sec & 12 Sec.Therapy Mode : 4 Pole Inerferential Therapy(Static), 4 Pole Vector Interferential Therapy (Dynamic).Treatment Time : 15 Minutes Pre-Settable (Can Be Set Between 1 - 99 Mts.).Intensity : 0 -100 Ma Continuously Variable (I Ma Steps).Balance Control : To Equalise Both The Channel Currents.Output Display: Lcd Display Will Show The Real Patient Current Continuously For Ch 1 & Ch 2.Tens Frequency : 1 To 150 Hz.Russian Current : 2500 Hz Sine Wave.Tens :- Output Current : 0 To 60 Ma, Output Voltage : 0 To 100V (Peak To Peak), Frequency : 1 To 200Hz, Pulse Width : 75 To 360?S, Output Waveform :Symmetric, Treatment Time : 5 - 20 Minutes, Alarm : The Buzzer Alarms When The Intensity Control Is Not At Zero.Types Of Tens : 1. Traditional Tens (Hi Tens, Normal Tens), 2. Acupuncture Tens (Lo Tens, Acutens), 3. Brief Intense Tens, 4. Burst Mode Tens, 5. Modulation Mode Tens. Two Years Warranty , Ultrasound :Maximum Output : 2.5 Watts/Sq.Cm, Operating Frequency : 1 Mhz & 3 Mhz, Mode Of Operation : Continuous Mode & Pulsed Mode, Pulse Ratios : 1:1, 1:4, 1:7 & 1:10, Treatment Time : 0 - 99 Minutes,Alarm : The Buzzer Alarms When The Treatment Time Counts Down To Zero,Display : Led.Two Years Warranty. , Transcutaneous Electrical Nerve Stimulator (Tens) :Treatment Mode : Faradic,Surged Faradic, Galvanic & Interrupted Galvanic.Faradic : Frequency50 Hzand Pulse Width0.7 Ms.Surged Faradic: Frequency 50 Hz And Surged Duration 1 Sec - 6 Sec (Continuously Adjustable). Interupted Galvanic :Frequency 1 Hz, Duration 30Ms - 300 Ms (Continuously Adjustable).Diagnostic Option : Should Be Able To Do Sd Curve.Two Years Warranty. , Perforated Autoclave Tray With Lid And Locking System, Appropriate Size To Accommodate All Above Mentioned Instruments, With Silicone Finger Mat And Instrumentholders , Stainless Steel/Equivalent, Compatible With Autoclaving. , Sugita Interchangeable Suction Tube Set (Please Do Not Exceed Rs 1,00,000) Balanced Handpiece (Flat Teardrop Suction Handle With Safety Coupling ) Which Can Be Kept Between Thumb And Forefinger Space For A Attaching A Range Of Suction Cannulasbalanced Handpiece (Flat Teardrop Suction Handle With Safety Couplingcannulas Are Of The Following Sizes (3 To 12 French, Each In Following Lengths - Short: 7.6 Cm Medium: 9.5 Cm Long: 11.4 Cm Extra Long: 13.3 Cm. Also Multihole Tube Type Each 5, 7 And 9 French (All Suction Cannulas [43 Numbers] Should Preferably Come In Its Own Case). The Suction Cannulas Have To Be Pre-Bent 30 Degrees, Malleable And Rotatable And Ability To Change Tube Without Discarding Hand Piece. (One Set Should Contain All The Above Mentioned Items) , Kerrison Bone Punch 1Mm 90 Degree Up Cut (Long) , Kerrison Bone Punch 1Mm 90 Degree Down Cut (Long) , Kerrison Bone Punch 2Mm 90 Degree Forward Up Cut , Kerrison Bone Punch 3Mm 90 Degree Forward Up Cut , Kerrison Bone Punch 3Mm 130 Degree Forward Up Cut , Kerrison Bone Punch 4Mm 130 Degree Forward Up Cut , Rotatable Kerrison Bone Punch (90 Degree)Assembly (Billy Or Equivalent) With Two Punches 1 Mm And 2 Mm Each. (1 Mm - 1Set 2Mm - 1 Set ) , Suction Cannula Frazier Type Working Length 8Cm 3F Size , Suction Cannula Frazier Type Working Length 8Cm 6F Size , Suction Cannula Frazier Type Working Length 8Cm 9F Size , Suction Cannula Frazier Type Working Length 12Cm 3F Size , Suction Cannula Frazier Type Working Length 12Cm 6F Size , Suction Cannula Frazier Type Working Length 12Cm 9F Size , Suitable Tray For Storage And Sterilisation For All The Above Bipolar Forceps With Silicon Cushion Mat , Suction Cannula Fergusson Type ,Conical Tube,Atraumatic Rounded Tip,Tear Drop Shaped Suction Interuptor,Working Length 8Cm 3F Size , Suction Cannula Fergusson Type ,Conical Tube,Atraumatic Rounded Tip,Tear Drop Shaped Suction Interuptor,Working Length 8Cm 6F Size , Suction Cannula Fergusson Type ,Conical Tube,Atraumatic Rounded Tip,Tear Drop Shaped Suction Interuptor,Working Length 8Cm 9F Size , Suction Cannula Fergusson Type ,Conical Tube,Atraumatic Rounded Tip,Tear Drop Shaped Suction Interuptor,Working Length 12Cm 3F Size , Suction Cannula Fergusson Type ,Conical Tube,Atraumatic Rounded Tip,Tear Drop Shaped Suction Interuptor,Working Length 12Cm 6F Size , Suction Cannula Fergusson Type ,Conical Tube,Atraumatic Rounded Tip,Tear Drop Shaped Suction Interuptor,Working Length 12Cm 9F Size , Suitable Tray For Storage And Sterilisation For All The Above Bipolar Forceps With Silicon Cushion Mat , Rhoton Round Microdissector 2Mm Tip Titanium , Rhoton Round Microdissector 4Mm Tip Titanium , Rhoton Spatula Microdissector 2Mm Tip Titanium , Rhoton Spatula Microdissector 4Mm Tip Titanium , Rhoton Ball Microdissector 90 Degree Angled Titanium , Penfield Round Handle Single Tip Flat Curved Dissector 2Mm Tip,Stainless Steel , Penfield Round Handle Single Tip Flat Curved Dissector 5Mm Tip,Stainless Steel , Suitable Tray For Storage And Sterilisation For All The Above Bipolar Forceps With Silicon Cushion Mat , Right Angle Clamp (Fine Tip) , Raney Clip Applicator , Macdonald Dissector , Dural Guide , Howarth Periosteal Elevator , Artery Forceps, Curved,Mosquito , Artery Forceps, Straight, Mosquito , Microball Probes, 90 Degree & 45 Degree (One Each) , Nerve Root Retractor , Micro Disc Punches, Non- Ceramic Coated, Straight- 3 Nos And Angled- 1 Nos , Regular Disc Punches, Non- Ceramic Coated, Straight - 3 Nos And Angled- 1 Nos , Micro Disc Punches, Ceramic Coated, Straight - 4 Nos , Regular Disc Punches, Ceramic Coated, Straight - 3 Nos& Angled- 1 Nos , Vertebral Spreader Which Expands From Within The Disc Space In Anterior Cervical Discectomy And Fusion Procedure , Vertebral Spreader Which Expands Using Two Pins That Penetrates Vertebral Boddies In Anterior Cervical Discectomy And Fusion Procedure , Luer - Stille Bone Rongeur, 225Mm / 9 , Frykhon Bone Rongeur, 240Mm / 9-1/2 , Mayfield Bone Rongeur, 175Mm / 7 , Echlin Bone Rongeur, 230Mm / 9 , Gigli Saw Holder , Freer Periosteal Elevator, 185Mm, 7-1/4, Sharp & Blunt (One Each) , Caspar Bone Curettes, 3Mm Tip ,5Mm Tip, Straight & Angled (One Each) , Jansen Self Retaining Retractor, 100Mm, 4 , Weitlander Self Retaining Retractor, 165Mm, 6-1/2 , Adson Self Retaining Retractor, 320Mm, 12-3/4 , Beckman Eaton Self Retaining Retractor, 320Mm, 12- 3/4 , Micro Jewellers Dissecting Forceps,Flat Handle.Tip 0.5-1Mm,Around 15 Length.Titanium , Micro Suture Tying Forceps With Round Handle And Diamond Dusted Plateau At The Tips, Around 15Cm Length, 1-2Mm Tip,Titanium , Micro Forceps With Diamond Dust Coating At Tip And Round Handle, Around 15 Cm Length,Straight 1-2Mm Tip ,Titanium, , Micro Needle Holder,Titanium Around 15 Cm Length With Diamond Dusted Holding Surface Straight Tip 1-2Mm , Micro Needle Holder,Titanium Around 15 Cm Length With Diamond Dusted Holding Surfacecurved Tip 1-2Mm , Micro Forceps With Diamond Dust Coating At Tip And Round Handle, Around 15 Cm Length,Curved 1-2 Mm Tip ,Titanium, , Suitable Tray For Storage And Sterilisation Of The Above 6 Titanium Microinstruments With Silicone Protective Spike Cushions , Yasargil Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Bayonetted ,Working Lenth 8Cm Blade 14Mm Opening 4Mm Staight Tip , Yasargil Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Bayonetted ,Working Lenth 8Cm Blade 14Mm Opening 4Mm Upcurved Tip , Yasargil Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Bayonetted ,Working Lenth 10Cm Blade 14Mm Opening 4Mm Staight Tip , Yasargil Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Bayonetted ,Working Lenth 10Cm Blade 14Mm Opening 4Mm Upcurved Tip , Yasargil Or Vannas Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Straight Flat Handle ,Total Lenth 10Cm Blade 5-7Mm Opening 3-5Mm Staight Tip , Yasargil Or Vannas Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Straight Flat Handle ,Total Lenth 10Cm Blade 5-7Mm Opening 3-5Mm Upcurved Tip , Yasargil Or Vannas Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Straight Flat Handle ,Total Lenth 15Cm Blade 5-7Mm Opening 3-5Mm Staight Tip , Yasargil Or Vannas Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Straight Flat Handle ,Total Lenth 15Cm Blade 5-7Mm Opening 3-5Mm Upcurved Tip , Yasargil Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Straight Flat Handle ,Total Lenth 15Cm Blade 5-7Mm Opening 3-5Mm Staight Dissecting Tip , Yasargil Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Straight Flat Handle ,Total Lenth 15Cm Blade 5-7Mm Opening 3-5Mm Upcurved Dissecting Tip , Yasargil Microscissors Stainless Steel Or High Quality Alloy,Non Glare Matt Finish Surface,Straight Flat Handle ,Total Lenth 15Cm Blade 5-7Mm Opening 3-5Mm Staight Serrated Cutting(Super Cut) Surface Tip , Suitable Tray For Storage And Sterilisation For All The Above Bipolar Forceps With Silicon Cushion Mat , Diamond Knife Wedge Balde, Length Around 20Cm , Hardy Pituitary Curettes, 4Mm, Forward Angled, Straight , Nicola Malleable Pituitary Curette , Caspar 360 Degree Rotatable Pituitary Scissors , Metzenbaum Scissors, 152 Cm , Microserrations At Cutting Edge, Slim, Black Handle , Metzenbaum Scissors, Meddium Size, 115 Mm, Straight , Metzenbaum Scissors, Meddium Size, 115 Mm Curved , Steven Tenotomy Scissors 15 Cm With Black Coating , Micro-Adsons Toothed Forceps, 150Mm, 6 , Standard Tissue Forceps, 145Mm, 5-3/4 , Rotatable Kerrison Bone Punch Assembly (Billy Or Equivalent) With Two Punches 1 Mm And 2 Mm Each. , Micro Kerrison Convertible Ejector Ronguer With Thin Foot Plate. Quote Uniform Price For All Sizes. Sizes Will Be Mentioned In Purchase Order. , Detachable Kerrison Which Allows Rapid Cleaning Of Debris With Ejector Mechanism. Quote Uniform Price For All Sizes. , Hegar-Mayo Needle Holder, 150Mm, 6, Tungsten Carbide Tipe , Shunt Tunneller, Adult , Shunt Tunneller, Peadiatric , Peritoneal Trocar , Friedman Micro Ronguer. 140 Mm Long. (Quote Same Price For Straight And Curved. The Shape Will Be Mentioned In Purchase Order , Lembert Ronguer 190 Mm(Quote Same Price For Straight And Curved. The Shape Will Be Mentioned In Purchase Order , The Sugita Aneurysm Clip Case: Should Be A Modular System Comprised Of Four Individual Clip Cases, Housed In An Instrument Bin, Locked In Place With One All-Encompassing Lid. The Clip Case Should Allow For Storage Of Up To 120 Individual Clips As Well As 10 Appliers (Including 2 Keyhole Appliers). The Clips Are Organized By Clip Type, Allowing For Quick Access To The Necessary Pattern. A List Of Appliers, By Type, Should Laser Etched Inside The Lid For Ease Of Reference. Spring Handled Appliers Should Be Held In Place With Silicone Brackets. Keyhole Appliers Are Stored Under The Clip Cases. Each Individual Clip Case Can Be Used As A Stand Alone Storage And Sterilization Container. , The Sano Multi Angle Clip Applier For Applying Slimline Sugita Clips . It Should Provide Flexibility In Clip Positioningwith Optimal Visibility Of The Operative Site. The Jointed Shaft And Apair Of Sockets, Housed In The Jaws Of The Applier, Should Allow The Clip To Be Held Through An Arc Of 320°. Adjusting Key Should Be Provided , Nano Scissors, Red, 15Cm Curved, 2.5Cm Wl , Nano Needle Holder, Blue, Diamond Dusted Jaw, 15Cm Straight, 2.5Cm Wl , Nerve Root Suction Retractor , Liga Clip Applicator. , Fukushima Key Hole Sugita Aneurysm Clip Applicator With Very Thin Profile And Milled Grip To Secure Large And Mini Clips , Perneczky Type Aneurysm Clip Applying Forceps , Lawton Deep Cavernous Malformation Set (Should Not Exceed 1 Lakh) Should Contain Straight, 30 And 45 Degree Angled And Reverse Angled 1 Mm Thick Dissectors , Spurling Black Coated Intervertebral Disc Ronguers With Semidetachable Shaft With Ceramic Coating , Olivecrona Dura Forceps 2X3 Fine Teeth . 15 Cm , Osteotome With 8 Mm Edge,4 Mm Edge (4Mm -2 Nos 8Mm - 2Nos) , Instrumentation For Cranioplasty Using Micro Plates And Screws Includes The Following. 1)Screw Driver Handle -1No, 2) Screw Driver Shaft-2No, 3)Plate Bender-2Nos, 4)Plate Cutter-1No, 5) Plate Holding Grasping Forcep-1No. , Instrumentation For Flap Fixation Clamp System Includes The Following.1) Clamp Appying Forceps -1No,2) Clamp Holding Forceps-1No, 3) Rod Cutter-1Nos,4)Clamp Removing Forceps-1No, 5) Instrumentation Tray For Holding The Instruments , Resistance Band (Thera Band With Different Levels Of Resistance With Colour Code) : Colour Of Bands : Yellow, Red, Green, Blue, Black And Silver.Length Of Bands : - 1.5 Mtr Each. , Gardner - Wells Skull Tongs Along With Traction Pulley And 10Kg Weights (1Kg - 6 Nos., 2Kg - 2 Numbers) The Skull Tongs Should Have Spring Loaded Pins. , Mesh Bender For Easy Bending Of Dynamic Titanium Meshes That Can Be Contoured. , Titanium Mesh Cutter , Patient Positioning Silicone/Deformable Polimer Gel Device (Sacral Protector-Adult) , Patient Positioning Silicone/Deformable Polimer Gel Device (Sacral Protector-Pediatric) , Patient Positioning Silicone/Deformable Polimer Gel Device (Flat Arm Board Pad-Adult) , Patient Positioning Silicone/Deformable Polimer Gel Device (Flat Arm Board Pad-Peadiatric) , Patient Positioning Silicone Gel/Deformable Polimer Device (Heel Support Pad - Adult) , Patient Positioning Silicone Gel/Deformable Polimer Device (Heel Support Pad - Pediatric) , Patient Positioning Silicone/Deformable Polimer Gel Device(Dome - Flat Bottom Chest Roll - Pediatric) , Patient Positioning Silicone/Deformable Polimer Gel Device (Dome - Flat Bottom Chest Roll - Adult) , Implant Module With Three Lift Out Inlays For Storage Of Plates, Screwdrivers And Drill Bits Capable Of Storing Titianium Mesh Up To 90 X 90 Mm Under The Screw Bay. Include A Screw Driver. , Patient Warmer Based On Convective Forced Air Warming Technique With Ten Adult Blankets And Ten Pediatric Blankets To Be Supplied. Filter Change Indicator Is Desirable.Two Years Warranty Is Essential. , Percutaneous, Sterile, Ready To Use Tracheostomy Set. , Balloon Kyphoplasty Set With Kyphoplasy Cement In Sterile Ready To Use Package. Should Have A Pressure Indicating Syringe With Digital Display. , Intracranial Pressure Monitor (Supply One Compatible Parenchymal Or Subdural Or Ventricular Consumable Item) , Chlorhexidine Slow Release Disc Which Can Be Placed At The Site Of Indwelling Vascular Catheters. Should Release The Agent Over Seven Days. , Polytetrafluoroethylene Patch 0.3 Mm Thickness Suitable For Carotid Endarterectomy (7X5 Cm) , Absorbable Cranial Fixation System Thin Profile (Craniotomy Bone Flap Fixation) Fda Approval Is Desirable, All Necessary Tools For Implantation Should Be Provided On Loan Basis , Cyanoacrylate Microbial Sealants For Skin Preparation Prior To Surgery In A Disposable, Sterile, Single- Use Applicant That Can Cover An Area Of 20 X 20 Cm , Endotracheal And Tracheostomy Cuff Pressure Controller To Continously Monitor Cuff Pressure Within The Ideal Range Of 20-30 Cm Of Water. It Should Have A Pressure Feedback Mechanism To Increase Pressure During Peak Inspiration. Single Use, Disposable, Sterile , Bronchial Hygiene Vibratory Pep Therapy System : Should Benefit Both Pep Therapy And Airway Vibration To Mobilize Pulmonary Secretions And Also In Virtually Spatial Orientaion.Should Allows Inhalation And Exhalation Without Removing From Mouth, To Be Used With Mask Or Mouth Piece Nebulizer.Should Have Pressure Port With Pressure Indicator, Tubing, Mouthpiece, Mask Of Different Sizes.It Should Have Provision For Frequency Adjustment. , Hand Cuff Pressure Gauge And Inflator •Gauge Monitorintra Cuff Pressure Of Endo Tracheal Tubes/ Tracheostomy Tubes Should Have Conveneint, Ergonomic Design •Should Be Able To Inflate Or Deflate Cuff As Per Requirement •Should Form An Adequate Seal And Safe Cuff Pressure •Should Calibrated In Cm Of Water •Should Fitted With Clip Attachment For Storage & Quick Access For Intra Cuff Pressure Monitoring. •Should Have Additional Extension Cord Supplied With The Instrument •Should Have Button To Adjust Pressure ( Reducing Cuff Pressure) •Should Have The Provision In The Bottom Of Instrument For Deflating The Cuff , Long Screwdriver For Placing The Stereo-Eeg Electrode , Wrench For Placing The Stereo-Eeg Electrode , Clamp For Placing The Stereo-Eeg Electrode , Ruler For The Stereo-Eeg Electrode , Drill (Length Of 200 Mm) For Placing The Stereo-Eeg Electrode , Drill (Length Of 250 Mm) For Placing The Stereo-Eeg Electrode , Stylet With Stopper For Placing The Stereo-Eeg Electrode , Straight Coagulation Electrode 30 Mm Compatible With The Stereo-Eeg Electrode , Dennis Micro Ring Tip Forcep 8 1/4 With 1Mm * 0.5Mm Tip And Counterbalance , Gerald Tissue Forceps- 2*1 Teethed,1.4 Mm Tip, Straight, 7 Inches , Gerald Tissue Forceps- 2*1 Teethed,1..4 Mm Tip, Bayonet, 7 Inches , Control Unit That Will Interface With The Single Use Iso-Thermic Skin Temperature Probe Described In The Consumables Section. It Should Be Compact With The Largest Dimension Not Greater Than 9 Cm. Weight Should Not Be More Than 140 Grams. Supply Five Skin Termperature Probes Also. , Weight Cuff With Velcro Strap. Set Of 1Kg, 2Kg & 3Kg Cuffs (One Set Should Ocntain All The Items) , Rubber Dumbells.Set Of 1Kg, 2Kg & 3Kg Dumbells For Muscle Strengthening , Resistance Band (Thera Band With Different Levels Of Resistance With Colour Code) : Colour Of Bands : Yellow, Red, Green, Blue, Black And Silver.Length Of Bands : - 1.5 Mtr Each. Quote Uniform Rate For All Bands. The Exact Quantity And Type Of Band Will Be Mentioned At The Time Of Order Placement. , Frame Walker (Medium Size) , Foldable Walker For Making The Patient To Walk With Support , Quadripod For Making The Patient To Walk With Minimal Support , Tripod For Making The Patient To Walk With Minimal Support , Spinal Braces (Taylors Brace) : Size: Small, Medium & Large. Quote Uniform Rate For All Sizes. The Actual Requirement Of Sizes Will Be Intimated At The Time Of Order Placement , Hand Dynamometer: Analogue Dial Type Display With Ability To Measure Upto 90 Kg Or Better , Hand Dynamometer: Electronic With Ability To Measure And Display Upto 90 Kg Or Better , Suction Cannula Fukushima Type Working Length 8Cm 3F Size , Suction Cannula Fukushimatype Working Length 8Cm 6F Size , Suction Cannula Fukushimatype Working Length 8Cm 9F Size , Suction Cannula Fukushimatype Working Length 12Cm 3F Size , Suction Cannula Fukushimatype Working Length 12Cm 6F Size , Suction Cannula Fukushimatype Working Length 12Cm 9F Size , Ramanis Spine Retractor With Atleast 4 Sets Of Blades And Hooks , Compact Led Light Source With A Goose Neck Suitable For Use In Icu. Foot Print Should Not Exceed A Maximum Diameter Of 60 Cm , Foramenotomy Kerrison Roungers With Upward Curve-2Mm , Foramenotomy Kerrison Roungers With Upward Curve-3Mm , Super Micro Bone Rongeur Bayonetted Forceps Type-Straight Tip With 90Mm Working Distance , Super Micro Bone Rongeur Bayonetted Forceps Type-Upward Turned Tip With 90Mm Working Distance , Bayonetted Shaft Kerrison Rounger 45 Degrees Upturned 2Mm Tip , Bayonetted Shaft Kerrison Rounger 45 Degrees Upturned 1Mm Tip , Tubular Retractor System For Minimally Invasive Intracranial Hematoma Evacuation , 13.Mm Diameterof Varying Tlength-Should Have An Obturator And Sheath , Suction Irrigation System With Softtube Tip For Use With Neuroendoscope For Intrcranial Hematoma And Intraventricular Hematoma
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 39
Puducherry View Result →
32.
Educational and Research Institute #9392647 Technical Bid
Supply Of Printed Books As Per Tender Document , Supply Of Printed Books , Heat Transfer/Binay K. Dutta/Phi Learning Private Limited/978-81-203-1625-6 , Stoichiometry And Process Calculations/K.V.Narayanan And B.Lakshmikutty/Phi Learning Private Limited/978-8120352896 , Elements Of Chemical Reaction Engineering/H. Scott Fogler/Phi Learning Private Limited/978-7502741006 , Chemical Reaction Engineering/Octave Levenspiel/Wiley/978-8126510009 , Mass Transfer Operations/Robert Treybal/Mcgraw Hill Education/N/A , Transport Processes And Separation Process Principles/Chistie John Geankoplis/Pearson Education India/N/A , Principles Of Mass Transfer And Separation Processes/Binay K. Dutta/Phi Learning Private Limited/N/A , Chemical Process Safety: Fundamentals With Applications /Daniel Crowl , Joseph Louvar/Pearson Education India/N/A , Transport Phenomena/R. Byron Bird, Warren E. Stewart, Edwin N. Lightfoot/Wiley/N/A , Chemical Process Control: An Introduction To Theory And Practice/George Stephanopoulos/Pearson/N/A , Process Systems Analysis And Control/Steven E Leblanc Donald R. Coughanowr/Mcgraw Hill Education/N/A , Chemical Engineering Design: Principles, Practice And Economics Of Plant And Process Design/Gavin Towler, Ray Sinnott/Butterworth-Heinemann Ltd/N/A , Plant Design And Economics For Chemical Engineers/Max Peters, Klaus Timmerhaus, Ronald West, Max Peters/Mcgraw Hill/N/A , Unit Operations Of Chemical Engineering/Warren Mccabe/Mcgraw Hill Education/N/A , Process Plant Simulation/B.V Babu/Oxford University Press/N/A , A Textbook Of Machine Design/R.S.Khurmi/S Chand/N/A , Mechanical Operations Fundamental Principles And Applications/Dr. Kiran D. Patil/Nirali Prakashan/N/A , Unit Operation -1/K. A. Gavhane/Nirali Prakashan/N/A , A Textbook Of Heat And Mass Transfer/Rk Rajput/S Chand/N/A , Numerical Methods For Engineers/Steven Chapra Raymond Canale/Mcgraw Hill Education/N/A , A Text Book Of Railway Engineering/Saxena S.C /Dhanpat Rai Publication/N/A , Adsorption Analysis: Equilibria And Kinetics (With Cd Containing Computer Matlab Programs): 2 (Series On Chemical Engineering)/ Duong D Do/Imperial College Press/978-1860941375 , Advanced Concrete Technology/Zongjin Li/John Wiley & Sons Ltd/978-0470437438 , Advanced Mechanics Of Solids/Srinath, L.S./Tata Mcgraw-Hill/978-0070139886 , Advanced Reinforced Concrete Design/Krishnaraju N/Cbs Publishers/978-8123929606 , Alkali-Aggregate Reaction And Structural Damage To Concrete /Geoffrey E Blight/Crc Press/978-1138073036 , An Introduction To The Finite Element Method/Reddy, J.N./Mcgraw Hill/978-9390385270 , Basic Structural Analysis/Reddy, C. S./Tata Mcgraw Hill/978-0070702769 , Classical And Computational Solid Mechanics/Fung,Tong And Chen/World Scientific Publishing Co Pte Ltd/978-0000988508 , Concrete Structures/Bhattacharjee J/Cbs Publishers/978-9385915901 , Concrete Structures Subjected To Impact And Blast Loadings And Their Combinations/Zhang Chunwei/Taylor & Francis Ltd/978-1032200514 , Concrete Technology/A M Neville/Pearson Education/978-8131705360 , Construction Materials Their Nature And Behaviour/Marios Soutsos, Peter Domone/Crc Press/978-1498741101864 , Design Of Reinforced Concrete Structures/Subramanian N/Oup India/978-0198086949 , Dynamics Of Structures/Clough,R.W. And Penzien, J/Mcgraw Hil/978-8123926636 , Elasticity And Plasticity: The Mathematical Theory Of Elasticity And The Mathematical Theory Of Plasticity/J.N. Goodier/Dover Publications Inc./ 978-0486806044 , Elements Of Strength Of Materials/Timosenko, S. P., And Young, D.H./Affiliated Eastwestpress Pvt. Ltd/978-8176710190 , Engineering Mechanics Of Solids/Popov, E.P./Pearson Education India/9332550216 , Environmental Engineering/Howard S Peavy, Donald R Rowe/Mcgraw Hill Education/978-9351340263 , Environmental Engineering (Vol. I) Water Supply Engineering/Santosh Kumar Garg/Khanna Publishers/978-8174091208 , Environmental Engineering (Vol. Ii) Sewage Waste Disposal And Air Pollution Engineering/Santosh Kumar Garg/Khanna Publishers/978-8174092304 , Finite Element Analysis: Theory And Programming/C. S. Krishnamurthy/Mcgraw Hill/978-0074622100 , Foundations Of The Theory Of Elasticity, Plasticity, And Viscoelasticity /Eduard Starovoitov And Faig Bakhman Ogli Naghiyev/Apple Academic Press Inc./978-1774631997 , Handbook Of Solid Waste Management/George Tchobanoglous, Frank Kreith /Mcgraw Hill Education/978-0071356237 , Highway Engineering/Khanna & Justo/Nemchand Publisher/8185240930 , Industrial Water Pollution Control/W Wesley Eckenfelder/Mcgraw Hill Education/978-9339220433 , Integrated Design And Environmental Issues In Concrete Technology/K Sakai/Crc Press/978-0367864620 , Intermediate Structural Analysis/Wang, C.K./Mcgraw Hill Education/978-0070702493 , Introduction To Solid Mechanics/Shames, H/Phi/978-9332549906 , Introduction To Traffic Engineering/R Srinivasa Kumar/The Orient Blackswan; South Asian Edition/9386235471 , Matrix And Finite Element Analysis Of Structures/Madhujit Mukhopadhay And Abdul Hamid Sheikh/Anebooks Pvt. Ltd./978-81-8052-075-4 , Microwave-Assisted Concrete Technology/Ong K.C. Gary/Crc Press/978-1138748897 , Prestressed Concrete /Krishnaraju N/Mcgraw Hill Education India/978-9387886209 , Principles Of Adsorption And Adsorption Processes/ Douglas M. Ruthven/Wiley-Interscience/978-0471866060 , Properties Of Concrete/A M Neville/Pearson Education/978-0273755807 , Random Vibrations Of Elastic Systems/Bolotin, V. V./Springer/978-9048182800 , Recent Trends In Solid Waste Management (Advances In Pollution Research)/Balasubramani Ravindran,Sanjay Kumar Gupta/Elsevier - Health Sciences Division/978-0443152061 , Reinforced Concrete: Mechanics And Design, Global Edition /Wight James/Pearson Education Limited/978-1292106007 , Soil Mechanics And Foundation Engineering - Geotechnical Engineering/K.R.Arora/Standard Publisher Dist/8180141128 , Solid Mechanics /Kazimi, S. M.A/Tata Mcgraw-Hill/978-0074517154: ? , Sprayed Concrete Technology/Simon Austin/Crc Press/978-0367865412 , Standard Methods For The Examination Of Water And Wastewater/William C. Lipps, Ellen Burton Braun-Howland, Terry E. Baxter/American Public Health Association/978-0875532998 , Statically Indeterminate Structures/Wang, C.K./Mcgraw Hill Book Company/978-9352604722 , Strength Of Materials/Srinath, L.S, Desayi./Macmillan Publishers India/978-0333923924 , Strength Of Materials, Part 1/Timoshenko, S/Mcgraw Hill/978-8123910307 , Strength Of Materials, Part 2/Timoshenko, S/Mcgraw Hill/978-8123910772 , Structural Dynamics/Mario Paz/Cbs Publications/978-8181287724 , Structural Dynamics- Theory And Application To Earthquake Engg/Anil K Chopra/Pearson Education/978-9353945251 , Structural Dynamics: Vibrations And Systems/Mukhopadhyaya, M./Ane Books /978-8180520907 , Sulfate Attack On Concrete/Jan Sklany/Taylor & Francis Ltd/978-0367447144 , Textbook Of Highway And Traffic Engineering/Saxena S.C /Cbs /978-8123924175 , The Finite Element Method Its Basis & Fundamentals/Zienkiewicz, Taylor And Zhu/Elsevier/978—81-312-118-2 , Theory Of Elasticstability/Timoshenko, S.P. And Gere, J. M./Tata Mcgraw Hill./978-0-07-0702417 , Theory Of Elasticity/Timoshenko And Goodier/Mcgraw Hill/978-0070701229 , Theory Of Elasticity And Plasticity: A Textbook Of Solid Body Mechanics/Antonina Molotnikova And Valentin Molotnikov /Springer Nature/978-3030666248 , Theory Of Plates And Shells/Timoshenko And Kriger/Tata Mcgraw Hill/978-0-07-070125-0 , Traffic & Highway Engineering/Nicholas J. Garber/Cengage India Private Limited/978-8131529430 , Traffic Engineering/R P. Roess (Author), Elena S. Prassas (Author), William R. Mcshane (Author)/Pearson Education/9353434858 , Wastewater To Water: Principles, Technologies And Engineering Design/Makarand M. Ghangrekar/Springer Verlag, Singapore/978-9811940507 , Soil Dynamics And Machine Foundations/Swami Saran/Galgotia Publication S Pvt. Ltd./978-8175157279 , Soil Mechanics And Foundation Engineering/K. R. Arora/Standard Publishers/978-8180141126 , Basic And Applied Soil Mechanics/Gopal Ranjan, Asr Rao/New Age International/9788122440393, , Design Of Steel Structures/N. Subramanian/Oxford University Press/978-0199460915 , Fundamental Concepts Of Earthquake Engineering /Roberto Villaverde/Crc Press/1420064959 , Civil Engineering Drawing /M Chakraborti// , Data Mining Concepts And Techniques /Jiawei Han, Jian Pei,Hanghang Tong/Elsevier/9788131267660 , Data Science In Practice/Tom Alby/Chapman & Hall/9781032505268 , Introduction To Data Science: Practical Approach With R And Python/B. Uma Maheswari, R. Sujatha/Wiley/9789354640506 , Transformers For Natural Language Processing And Computer Vision - Third Edition/Denis Rothman/Packt Publishing/9781805128724 , Generative Deep Learning/ David Foster/Oreilly Media/9781098134181 , Introduction To Machine Learning /Ethem Alpayd?N/Mit Press/9780262043793 , Data Mining With R/Luis Torgo/Taylor And Francis/9780367372453 , Bioinformatics And Functional Genomics/Jonathan Pevsner/Wiley Blackwell Pub/978-1118581780 , Bioinformatics Basics: Applications In Biological Science And Medicine/ Lukas K. Buehler/Crc Press/978-0367392598 , What Is The Name Of This Book?/Raymond M. Smullyan/Dover Publications Inc./978-0486481982 , The Lady Or The Tiger?/Raymond M. Smullyan/Dover Publications Inc./978-0486470276 , The Riddle Of Scheherazade: And Other Amazing Puzzles, Ancient And Modern./Raymond M. Smullyan/Knopf/978-0679446347 , Convex Optimization/Stephen Boyd, Lieven Vandenberghe/Cambridge University Press/978-0521833783 , Genetic Algorithms In Search, Optimization And Machine Learning/David E. Goldberg/Pearson/978-8131709931 , Steganography In Digital Media: Principles, Algorithms, And Applications/Jessica Fridrich/Cambridge/978-0521190190 , Deep Learning From Scratch: Building With Python From First Principles/Seth Weidman/Shroff/Oreilly/978-9352139026 , Wireless Communication Systems /Rajeshwar Dass./Wiley/978-9389583687 , Semiconductor Materials, Devices, And Fabrication, As Per Aicte/Parasuraman Swaminathan/Wiley/978-8126508624 , Introduction To 4G Mobile Communications/Juha Korhonen/Artech House Publishers/978-1608076994 , An Introduction To Lte/Cox Christopher/Wiley/978-1118818039 , Fourth Generation Mobile Communication/Curwen Peter/Springer International Publishing Ag/978-3319022093 , Advanced Wireless Communications: 4G Technologies/Savo G. Glisic/Wiley–Blackwell/978-0470867761 , 4G Wireless Communication Networks: Design Planning And Applications/Johnson I. Agbinya, Mari Carmen Aguayo-Torres, Ryszard Klempous/River Publishers/978-8792982711 , Fundamentals Of Lte/Rews, Rias Muhamed, Arunabha Ghosh, Jun Zhang, Jeffrey G./Pearson/978-9353062392 , 5G Mobile Communications/Wei Xiang, Kan Zheng, Xuemin (Sherman) Shen/Springer International Publishing Ag/978-3319342061 , 5G Mobile Core Network: Design, Deployment, Automation, And Testing Strategies/Rajaneesh Sudhakar Shetty/Springer India/978-1484283288 , 5G Mobile And Wireless Communications Technology/Afif Osseiran, Jose F. Monserrat, Patrick Marsch, Mischa Dohler, Takehiro Nakamura/Cambridge University Press/978-1107130098 , Towards 5G: Applications, Requirements And Candidate Technologies/Rath Vannithamby, Shilpa Talwar/Wiley/978-1118979839 , Fundamentals Of 5G Mobile Networks/Jonathan Rodriguez/Wiley/978-1118867525 , A Course In Electrical And Electronic Measurements And Instrumentation/A.K. Sawhney/Dhanpat Rai & Co. (P) Limited;/978-8177001006 , A Course In Electrical Machine Design/A.K. Sawhney/Dhanpat Rai & Co. (P) Limited /978-8177001013 , A Course In Electrical Technology (Basic Electrical Engineering Volume I)/J.B.Gupta/S.K. Kataria & Sons/81-85749-29-9 , A First Course On Electrical Drives/S.K.Pillai/New Age International Publishers/978-8122433616 , A Text Book Of Electrical Technology (Vol.1)/B.L.Theraja, A.K.Theraja/S.Chand Technical/9788121924405 , A Textbook Of Electrical Technology Volume Ii : Ac And Dc Machines/B.L.Theraja, A.K.Theraja/S Chand/978-8121924375 , Advanced Electrical Technology/H. Cotton/Reem Publications Pvt. Ltd. /978-8190630719 , An Integrated Course In Electrical Engineering/J.B.Gupta/S.K. Kataria & Sons/9-789350143681 , An Introduction To Analog And Digital Communication Systems/ Simon Haykin, Michael Moher /Wiley/978-8126536535 , An Introduction To The Principles Of Digital Communications/N.B.Chakraborti, A.K.Datta/New Age International Publishers/978-8122420838 , Analog Communication Systems/Sanjoy Sharma/S.K. Kataria & Sons/978-9350143797 , Artificial Intelligence And Intelligent Systems/N.P. Padhy/Oxford University Press/978-0195671544 , Artificial Neural Networks/B. Yegnanarayan/Prentice-Hall Of India Pvt. Ltd., New Delhi/ 978-8120312531 , Automatic Control System/ B. C. Kuo/ Prentice Hall Of India/9788120309685 , Automatic Control Systems (With Matlab Programs)/S. Hasan Saeed/Arihant Publisher/978-8190691925 , Basic Electrical Engg./D.P. Kothari & I.J. Nagrath/Mcgraw-Hill/9780070146112 , Basic Electrical Engg./V.K.Mehta, Rohit Mehta/S.Chand /978-8121908719 , Basic Electrical Engineering/A.E Fitzgerald, David E. Higginbotham, Arvin Grabel/ Mcgraw Hill Education/978-0070682566 , Circuit Theory (Analysis & Synthesis)/A.Chakraborti/Dhanpat Rai & Co./9788177000009 , Circuit Theory & Network/S. P. Ghosh And A. K. Chakraborty/Tata Mcgraw-Hill Education/9780071329040 , Communication Systems/Sekar, V. Chandra//978-0198078050 , Control System Engineering (Student Edition)/Norman Nise/John Wiley & Sons/978-8126537280 , Control Systems - I /S. Hasan Saeed/S.K. Kataria & Sons/978-9350141335 , Control Systems Engineering/I.J. Nagrath &M.Gopal/New Age International Pvt Ltd Publishers/9789386070111 , Design And Applications Of Analog Integrated Circuits/Soclof/Phi Learning Private Limited/978-81-203-2552-4 , Digital Communications/Sanjoy Sharma/S.K. Kataria & Sons/978-9350142684 , Digital Control Engineering/M. Gopal/New Age International Publishers/978-8122436617 , Digital Control Systems/B.C.Kuo/Oxford University Press/978-0198083542 , Digital Design/M. Morris Mano/Prentice Hall/978-0132774208 , Digital Electronics /G.K.Kharate/Oxford University Press/9-780198061830 , Digital Integrated Electronics/H. Taub And D. L. Schilling/Mcgraw Hill Education/978-0070265080 , Digital Signal Processing/Monson H Hayes/Tata Mcgraw - Hill Education/978-0070153868 , Digital Signal Processing/P.Ramesh Babu/Scitech Publications/978-8183710817 , Digital Signal Processing/B. Kumar/New Age International Publishers/978-8122436099 , Digital Signal Processing: A Computer Based Approach/S. K. Mitra/Mcgraw Hill Education/978-1259098581 , Direct Energy Conversion/Kettani, M. Ali/Addison-Wesley/ 97-80201036633 , Direct Energy Conversion/Stanley W. Angrist/Allyn And Bacon/978-0205077588 , Distributed Generation: Induction And Permanent Magnet Generators/Loi Lei Lai, Tze Fun Chan/Wiley/978-0470062081 , Distributed Generation: The Power Paradigm For The New Millennium/Anne-Marie Borbely, Jan F. Kreide/Crc Press/978-1420042399 , Electric And Hybrid Vehicles/Tom Denton/Routledge/9781138842373 , Electric Circuits /David. A. Bell/Oxford University Press/9780195694284 , Electric Energy Systems Theory-An Introduction/Olle I. Elgerd/Tata Mcgraw Hill/9780070992863 , Electric Machines/ I. J. Nagrath And D. P. Kothari/Tata Mcgraw Hill/978-0070699670 , Electrical Circuit Analysis (Including Passive Network Synthesis)/C.L.Wadhwa/New Age International Publishers/978-8122418521 , Electrical Engineering Fundamentals/Vincent Del Toro/Phi Learning Private Limited/978-8120305991 , Electrical Engineering Materials/T.K.Basak/New Age International Publishers/978-8122427738 , Electrical Machinery/Dr. P.S.Bimbhra/Khanna Publishers/978-8174091734 , Electrical Machinery /S. K. Sen/Khanna Publishers /978-8174091529 , Electrical Machines/R.K.Rajput/Laxmi Publications(P) Ltd./978-8131804469 , Electrical Machines /S.K.Bhattacharya/Tata Mcgraw-Hill Education/978-9332902855 , Electrical Measurements And Measuring Instruments/ E.W Golding, F.C Widdis/Reem Publications Pvt. Ltd/978-8190630726 , Electrical Power System Quality/R.C.Dugan/Tata Mcgraw-Hill Education, 2003/978-1259005572 , Electrical Power Systems/Ashfaq Husain/Cbs Publishers & Distributors/978-8123914480 , Electromagnetic Fields & Waves96/Sarwate V.V./New Age/81-224-0468-5 , Electromagnetic With Application/J. D. Krauss/Tata Mcgraw Hill/9780070702400 , Electromagnetics/B.B.Laud/New Age International Publishers/978-8122430554 , Electromagnetism – Theory And Applications/Ashutosh Pramanik/Prentice-Hall Of India/978-8120319578 , Electronic Devices And Circuit Theory/R. Boylestad And L. Nashelsky/Prentice Hall Publishing Co/978-0132504577 , Electronic Devices And Circuits/J. Millman And C. C. Halkias/Mcgraw Hill Education/978-0070423800 , Electronic Instrumentation/H.S.Kalsi/Mcgraw Hill Education/978-0070702066 , Elements Of Advanced Quantum Theory/J.M. Ziman/Camridge University Press/521-07458-4 , Elements Of Electrical Power Station Design/M.V.Deshpande/Prentice Hall India Learning Private Limited /978-8120336476 , Elements Of Photonics Vol-1 /Keigo Lizuka/Wiley-Interscince/0-471-83938-8 , Elements Of Power System Analysis/W.D. Stevenson/Mcgraw Hill Higher Education/978-0070665842 , Energy Economics: Concepts, Issues, Markets And Governance/Subhes C. Bhattacharyya/ Springer/978-1447174707 , Energy Science Principles, Technologies And Impact/J. Andrews, N. Jelley/Oxford University Press/978-0198755814 , Energy Technology - Nonconventional, Renewable & Conventional/S.Rao, Dr. B.B.Parulekar/Khanna Publishers/97-88174090401 , Energy Technology (Non Conventional, Renewable And Conventional)/Prof. Sunil S. Rao And Dr. B.B. Parulekar/Khanna Publishers/978-81-7409-040-9 , Engineering Circuit Analysis/W. H. Hayt , J. Kemmerly /Mcgraw Hill Education/978-1259098635 , Engineering Electromagnetic/W. H. Hayt & J. A. Buck/Mcgraw-Hill/978-9353169725 , Engineering Electromagnetics/Hayat/Tmh/0-07-061223-4 , Engineering Optimization Theory And Practice/Singiresu S. Rao/New Age International Publishers/978-8122427233 , Engineering Thermodynamics/P.K.Nag/ Mcgraw Hill Education/978-9352606429 , Explanations / Solutions To An Integrated Course In Electrical Engineering (With About 15,000 Objective Type Questions & Answers) /J.B.Gupta/S.K. Kataria & Sons/978-9350146668 , Facts Controllers In Power Transmission And Distribution/K.R. Padiyar/New Age International Publishers/978-8122421422 , Fiber Optics Essentials/K. Thyagarajan & Ajoy Ghatak/Wiley-Interscince/978-0-470-09742-7 , Fiber Optics Through Experiments Paperback – 2011/Ajoy Ghatak, M. R. Shenoy /Viva Books (2011)/978-8130918112 , Fiber-Optic Communication Systems/Govind P. Agrawal/Wiley/978-8126513864 , Fibre Optics And Optoelectronics/R.P.Khare/Oxford University Press/9-780195669305 , Flexible Ac Transmission Systems/Yong Hua Song, Allan T. Johns/ Laxmi Publications /978-8190858809 , Fundamentals Of Digital Circuits/A. Anand Kumar/Prentice-Hall Of India Pvt. Limited/978-8120352681 , Fundamentals Of Electric Circuits/Charles K. Alexander, Matthew N. O. Sadiku/Mcgraw Hill Education (India) Private Limited/978-9355320162 , Fundamentals Of Microprocessors And Microcontrollers/B. Ram/Dhanpat Rai Publications (P) Ltd/978-9383182107 , Fundamentals Of Optical Wave Guides/Katsunari Okamoto/Elsevier/978-0-12-525-096-2 , Fundamentals Of Photonics /Bahaa E. A. Saleh, Malvin Carl Teich/ John Wiley & Sons, Inc./0-471-2-1374-8 , Fundamentals Of Power Electronics/Robert W. Erickson, Dragan Maksimovic/Springer Us/978-1-4757-0559-1 , Generation Distribution And Utilization Of Electrical Energy/C.L. Wadhwa/New Age International Publishers/978-8122428216 , Getting Started With Matlab/Rudra Pratap/Oxford University Press/978-0198069195 , Goldings Electrical Measurements And Measuring Instruments/Golding & Widdis/Medtech Publishers/978-9387210349 , Handbook Of Energy Conservation, Vol. 1/H.M. Robert, J.H. Collins/Cbs Publishers & Distributors/9-788123912066 , Handbook Of Energy Conservation, Vol. 2/H.M. Robert, J.H. Collins/Cbs Publishers & Distributors/9-788123912073 , High Voltage Engineering/C.L.Wadhwa/New Age International Publishers/978-8122430905 , High Voltage Engineering/M.S Naidu & V Kamaraju/Mcgraw Hill Education/978-1259062896 , High Voltage Engineering: Problems & Solutions/R.D. Begamudre/New Age International Publishers/978-8122426182 , Hvdc Power Transmission Systems/K.R. Padiyar/New Age International Publishers/978-8122437850 , Industrial Energy Conservation Techniques : Concepts, Applications And Case Studies /K. Nagabhushan Raju/Atlantic Publishers And Distributors (P) Ltd/978-8126907748 , Industrial Instrumentation/Donald P. Eckman/Cbs Publisher/978-8123908106 , Industrial Instrumentation/K.Krishnaswamy, S. Vijayachitra/New Age International Publishers/978-8122427509 , Industrial Instrumentation, Control And Automation/Mukhopadhay, Sen & Deb/Jaico Publishing House/978-8184954098 , Instrumentation And Control/Patranabis/Phi Learning Private Limited/978-81-203-4246-0 , Introduction To Digital Signal Processing/J.R. Johnson/ Prentice Hall India Learning Private Limited /978-8120307605 , Introduction To Fiber Optics (English) 1St Edition/Ajoy Ghatak , K. Thyagarajan/Cambridge University Press-New Delhi/97-88175960626 , Introduction To Quantum Mechanics/David J. Griffiths/Prentice Hall/0-13-124405-1 , Introduction To Quantum Mechanics/A.C. Philips/John Wiley & Sons, Inc./0-470-85323-9 , Introduction To Solid State Physics/ Charles Kittel /Wiley & Sons/978-8126535187 , Lasers And Non-Linear Optics/B.B.Laud/New Age International Publishers/978-8122430561 , Linear Integrated Circuits/D. Roy Choudhury, Shail B. Jain/New Age International Publishers/978-8122430981 , Matrix Analysis Of Electrical Machines/Ashoke Kumar Mukhopadyhay/New Age International Publishers/978-8122432398 , Microcomputer Systems: The 8086/8088 Family/I. Liu, G. A. Gibson/ Prentice Hall India Learning Private Limited/978-8120304093 , Microelectronic Circuits: Theory And Applications/A.S. Sedra And K.C. Smith/Oxford University Press/978-0199476299 , Microelectronics/J. Millman And A. Grabel/Mcgraw Hill Education/978-0074637364 , Microprocessor Architecture, Programming And Applications With The 8085A/8080A/Ramesh S. Gaonkar/Wiley Eastern Ltd./978-0852262979 , Microprocessors Interfacing/Douglas Hall/Mcgraw Hill Education/978-1259006159 , Modern Digital And Analog Communication Systems/B.P.Lathi/Oxford University Press/978-0198073802 , Modern Electronic Instrumentation And Measurement Techniques /A D Helfrick; W D Cooper/ Prentice Hall India Learning Private Limited/?978-9332556065 , Modern Power System Analysis/I.J. Nagrath And D.P. Kothari/Mcgraw Hill Education/978-0071077750 , Modern Quantum Mechanics /J.J.Sakurai/Addison -Wesley Publishing Company/0-201-53929-2 , Network Analysis And Synthesis/S. P. Ghosh And A. K. Chakraborty/Tata Mcgraw-Hill Education/9781259081422 , Network Analysis And Synthesis/Franklin F. Kuo /Wiley/978-8126510016 , Network Analysis And Synthesis (Including Linear System Analysis)/C.L.Wadhwa/New Age International Publishers/978-8122420364 , Networks And Systems/D. Roy Choudhury/New Age International Publishers/978-8122427677 , Neural Networks In Computer Intelligence /F. Limin/Mcgraw Hill Education/978-0070532823 , Neural Networks, Fuzzy Logic And Genetic Algorithms: Synthesis And Applications/S. Rajasekaran And G.A. Vijaylakshmi Pai,/Prentice-Hall Of India Pvt. Ltd., New Delhi/978-8120321861 , Non Conventional Energy Resources/D.S. Chauhan, S.K.Srivastava/New Age Int.(P) Ltd/978-81-224-3399-9 , Non-Conventional Energy Resources/B.H. Khan/Tata Mcgraw Hill/978-0070142763 , Non-Conventional Energy Resources/D.S. Chauhan/New Age International Publishers/978-8122433999 , Non-Conventional Energy Sources/G.D. Rai/Khanna Publishers/9-788174090737 , Nonlinear Fiber Optics/Govind P. Agrawal/Optics And Photonics/N/A , Nonlinear Optics /Robert W. Boyd/Academic Press/0-12-121682-9 , Objective Electrical Technology/V.K.Mehta, Rohit Mehta/S. Chand Publishing/978-9355014467 , Op-Amps And Linear Integrated Circuits/Gayakwad/Phi Learning Private Limited/978-81-203-2058-1 , Operational Amplifiers And Linear Ics/David. A. Bell/Oxford University Press/978-0195696134 , Optical Electronics /A.K.Ghatak & K.Thyagarajan/Camridge University Press/0-521-30643-4 , Optical Waves In Crystals/Amnon Yariv & Pochi Yeh/Wiley-Interscince/0-471-09142-1 , Optimization Of Power System Operation/Jizhong Zhu/Wiley/978-1-118-85415-0 , Parker Smiths 500 Solutions Of Problems In Electrical Engineering (Part 1)/V.C Nateshan/Cbs /N/A , Performance And Design Of Ac Machines/M. G. Say/Cbs Publishers/978-8123910277 , Photonics/Amnon Yariv & Pochi Yeh/Oxford University Press/978-0-19-517946-0 , Power Electronics/Dr. P. S. Bhimbra/Khanna Publisher/978-81-7409-279-3 , Power Electronics: Converters, Applications, And Design/Ned Mohan, Tore M. Undeland, William P. Robbins/Wiley India/978-8126510900 , Power Electronics: Devices, Circuits And Applications/Muhammad H Rashid/Pearson Education/978-9332584587 , Power Electronics: Essentials & Applications/L. Umanand/Wiley/978-8126519453 , Power Generation, Operation, And Control/Allen J. Wood, Bruce F. Wollenberg/John Wiley & Sons/978-8126508389 , Power Plant Engineering/Arora & Domkundwar/Dhanpat Rai & Co. (P) Limited/978-8177001952 , Power Plant Engineering/A.K.Raja, Amit Prakash Srivastava, Manish Dwivedi/New Age International Publishers/978-8122418316 , Power Plant Technology/M.M.El-Wakil/Mcgraw Hill Education/978-0070702448 , Power System Analysis/J.J.Grainger, W.D.Stevenson/Tata Mcgraw-Hill/978-0070612938 , Power System Analysis: Operation And Control/ Abhijit Chakrabarti, Sunita Halder/Phi Learning Pvt. Ltd./ 978-8120340152 , Power System Optimization: Stability And Control/K. R. Padiyar/Anshan Ltd./978-1904798019 , Power System Optimization/D .P. Kothari And J.S Dhillon/Prentice Hall India Learning Private Limited/?978-8120340855 , Power System Prorection And Switchgear/B. Ravindranath And M. Chander/New Age International Publishers/978-8122430325 , Power System Protection/S. P. Patra, S. K. Basu, S. Choudhuri/Oxford & Ibh Publishing Co./N/A , Power System Protection And Communications/Akhter Kalam/New Age International Publishers/978-8122427417 , Power System Protection And Swichgear/B. Ravindranath, M. Chander/New Age International Publishers/978-8122430325 , Power System Restructuring And Deregulation/Loi Lei Lai/John Wiley & Sons Ltd /978-8126547234 , Power System Stability Vol-I/E.W.Kimbark/John Wiley & Sons/978-8126512577 , Power System Stability And Control/Prabha Kundur/Tata Mcgraw-Hill Education Private Limited/978-0070635159 , Power System Stability Vol-Ii/E.W.Kimbark/John Wiley & Sons/978-8126512577 , Power Systems Analysis/ Arthur Bergen, Vijay Vittal / Pearson/978-0136919902 , Principles Of Electromagnetics/Matthew N.O. Sadiku/Oxford University Press/9780198062295 , Principles Of Electronic Instrumentation/Patranabis/Phi Learning Private Limited/978-81-203-3355-0 , Principles Of Industrial Instrumentation/D. Patranabis/Mcgraw Hill Education/978-0070699717 , Principles Of Power Systems/V.K.Mehta, Rohit Mehta/S.Chand & Co./978-8121924962 , Principles Of Process Control/ D. Patranabis/Tata Mcgraw Hill/978-0071333252 , Principles Of Signal Processing And Linear Systems/B.P.Lathi/Oxford University Press/978-0198062288 , Problems And Solutions In Power Systems/Abhijit Chakrabarti /Abhijit Chakrabarti /978-9334032581 , Problems In Electrical Engineering(Power Engineering And Electronics With Answers Partly Solved In S.I. Units)/N. N. Parker Smith/Cbs Publisher/978-8123908588 , Process Control (Concepts, Dynamics & Applications)/S.K.Singh/Phi Learning Private Ltd./978-8120336780 , Process Control (Principles & Applications)/Surekha Bhanot/Oxford University Press/978-0195693348 , Process Dynamics And Control/D.E. Seborg, T.F. Edgar And D.A. Mellichamp/Wiley/978-8126541263 , Process Systems Analysis And Control/D.R. Coughanowr And L.B. Koppel/Mcgraw-Hill/978-0070851122 , Pulse Width Modulation For Power Converters: Principles And Practice/D. Grahame Holmes, Thomas A. Lipo/Wiley Ieee Press/978-0-471-20814-3 , Quantum Optics/Harry Paul/Camridge University Press/978-0-511-19475-7 , Reliability And Life Estimation Of Power Equipment/T.S.Ramu And Chakradhar Reddy/New Age International Publishers/978-8122426113 , Renewable Energy For Sustainable Future/Godfrey Boyle/Oxford University Press/978-0199681273 , Research Insights: A Handbook On Grant Writing And Program Management/ Rajiv K. Tayal/Atlantic Publishers And Distributors Pvt Ltd./978-8126935451 , Semiconductor-Laser Fundamentals/Weng W. Chow & Stephen W. Koch/Springer/3-540-64166-1 , Sensors And Transducers/Patranabis/Phi Learning Private Limited/978-81-203-3355-0 , Signals And Systems/H. P. Hsu/Mcgraw Hill Education (India) Private Limited/978-0070669185 , Signals And Systems/A.V. Oppenheim, Schafer, R. W, A.S. Willsky And I.T. Young/ Pearson Education India/9332550239 , Smart Grid Technology And Application/Janaka Ekanayake, Kithsiri Liyanage, Jianzhong Wu, Akihiko Yokoyama And Nick Jenkins/Wiley Publications/978-0-470-97409-4 , Smart Grid: Concepts To Design/K. S. Manoj/Notion Press/9781646780006 , Smart Grid: Fundamental Of Design And Analysis/James Momoh/Wiley Publication/978-8126558124 , Solar Cell Device Physics/Stephen Fonash/Academic Press/978-0080912271 , Solar Cells: Operating Principles, Technology, And Systemapplications/Martin A. Green/Prentice-Hall/978-0138222703 , Solar Electricity Generation/S. Bhattacharjee/ Narosa Publishing House/97-88184874044 , Solar Energy/S.P. Sukhatme, J K Nayak/Tata Mcgraw Hill/978-9352607112 , Solar Photovoltaics: Fundamentals, Technologies And Applications/Chetan Singh Solanki/Phi Learning/978-8120351110 , Solid State Physics/A.J. Dekker/ Macmillan/978-0333106235 , Solid State Physics/ S.O. Pillai /New Age International Private Limited/978-9389802313 , Sustainable Energy Management/Mirjana Radovanovi? (Golusin),Stevan Popov,Sinisa Dodic /Elsevier/978-0124159785 , Taubs Principles Of Communication Systems /H. Taub And D.L. Shilling/Mcgraw Hill Education/978-0070648111 , The 8051 Microcontroller And Embedded Systems/Muhammed Ali Mazidi And Janice Gillispie Mazidi/Pearson Education India/978-0138610227 , The Theory Of Optics/Paul Drude/Longmans, Green & Co./N/A , Theory & Performance Of Electrical Machines/J.B.Gupta/S.K. Kataria & Sons/978-9350142776 , Thermal Engineering/R.K.Rajput/ Laxmi Publications/978-8131808047 , Understanding Facts: Concepts And Technology Of Flexible Ac Transmission Systems/Narain G. Hingorani, Laszlo Gyugyi/Wiley India Pvt Ltd./978-8126530403 , Signals And Systems /Ramesh Babu/Scitech Publications/978-81-8371-288-0 , Fundamentals Of Industrial Instrumentation /Barua/Wiley India/9788126528820 , Bioinstrumentation /Fulekar/Wiley India/9789389520286 , Wileys Gate Instrumentation Engineering Chapter-Wise Solved Papers (2000-2020)/Gupta/Wiley India/9788126558698 , Electronic Measurement & Instrumentation /Imam/Wiley India/9789389583021 , Electrical Measurements And Measuring Instruments/Kamakshaiah/Wiley India/9789389447521 , A Treatise On Instrumentation Engineering /Padmanabhan/Wiley India/9789389633832 , Instrumentation And Process Control /Prasad/Wiley India/9789389307191 , Biomedical Electronics And Instrumentation Made Easy /Sawhney/Wiley India/9789389795943 , Medical Instrumentation 5Ed: Application And Design, An Indian Adaptation /Webster/Wiley India/9789354249150 , Lasers And Optical Instrumentation /Nagabhushana/Wiley India/9789389698756 , Automatic Control Engineering /Gupta/Wiley India/9789389583748 , Power System Analysis: Operation And Control, 2Ed/Jena/Wiley India/9789389520415 , Process Control Engineering /Krishna/Wiley India/9789389633429 , Quality Control/Kulkarni/Wiley India/9788126519071 , Control Engineering/Kuttan/Wiley India/9789389520064 , Digital Control, W/Cd /Moudgalya/Wiley India/9788126522064 , Nises Control Systems Engineering, Wiley India Ed/Nise/Wiley India/9788126571833 , Control Systems /Padmanabhan/Wiley India/9789389633375 , Control Engineering/Ramachandran/Wiley India/9788126522880 , Power System: Operation & Control/Rao/Wiley India/9788126534418 , Matlab With Control System, Signal Processing And Image Processing Toolboxes, W/Cd /Sivanandam/Wiley India/9788126554751 , Statistical Quality Control: A Modern Introduction, 6Ed /Montgomery/Wiley India/9788126525065 , Robotics /Appu/Wiley India/9789389583281 , Fuzzy Sets And Fuzzy Logic With Engineering Applications, 4Ed, An Indian Adaptation /Rose/Wiley India/9788126502608 , Natural Language Processing/Kumar/Wiley India/9789389307597 , Optimization Techniques /Malik/Wiley India/9789389698725 , Artificial Intelligence For Dummies/Mueller/Wiley India/9788126576104 , Big Data Analytics Using Artificial Intelligence Technologies /Dixit/Wiley India/9789391029685 , Artificial Intelligence: Concepts And Applications /Goel/Wiley India/9788126519934 , Artificial Intelligence: Making A System Intelligent /Jain/Wiley India/9788126579945 , Artificial Intelligence/Kumar/Wiley India/9789389795134 , Process Dynamics And Control, 4Edan Indian Adaptation /Seborg/Wiley India/9789354248429 , Digital Control/Moudgalya/Wiley India/9788126522064 , An Advanced Approach To Data Interpretation For Competitive Examinations/R.S. Aggarwal/S Chand Publishing/978-9358702330 , Quantitative Aptitude For Competitive Examinations/R.S. Aggarwal/S Chand Publishing/978-9355012326 , Modern Approach To Verbal & Non-Verbal Reasoning/R.S. Aggarwal/S Chand Publishing/978-9355011534 , Objective General English/R.S. Aggarwal/S Chand Publishing/978-9355015075 , The Magic Of The Lost Temple/Sudha Murty/Penguin Books India/978-0143333166 , Samsara: Enter The Valley Of The Gods/Saksham Garg/Penguin/978-0143458289 , The Mountain Is You: Transforming Self-Sabotage Into Self-Mastery/Brianna Wiest/Amaryllis/978-9355434142 , I Dont Love You Anymore: Moving On And Living Your Best Life/Rithvik Singh/Ebury Press/978-0143469131 , Ancient India/Rs Sharma/Old Ncert/N/A , History Of Medieval India/Satish Chandra/Old Ncert/N/A , A Brief History Of Modern India/Spectrum Publications/Spectrum/N/A , India’S Struggle For Independence/Bipan Chandra/Penguin/N/A , Certificate Physical And Human Geography/G.C. Leong/Oxford University Press/N/A , India: A Comprehensive Geography/D.R. Khullar/Kalyani Publishers/N/A , Indian Polity/M. Laxmikanth/Mcgraw Hill/N/A , Indian Economy/Ramesh Singh/Mcgraw Hill/N/A , Environment/Shankar Ias/Shankar Ias Academy/N/A , Indian Art And Culture/Nitin Singhania/Mcgraw Hill/N/A , Disaster Management/R. Subramanian/Vikas Publishing/N/A , Internal Security/M.Karthikeyan/Tata Mcgraw Hill/N/A , Lexicon For Ethics, Integrity & Aptitude/Niraj Kumar/Pearson/N/A , Ethics, Integrity, And Aptitude/Subba Rao And P.N. Roy Chowdhury/Access Publishing/N/A , Principles Of Mathematical Analysis/Walter Rudin/Mcgraw-Hill Education/978-0070856134 , Real And Complex Analysis/Walter Rudin/Mcgraw Hill Education/978-0070619876 , Functional Analysis/Walter Rudin/Mcgraw Hill Education/978-0070619883 , Mathematical Analysis/Tom M. Apostol /Narosa/978-8185015668 , Real Analysis/Royden/Pearson Education India/978-9332551589 , Analysis I/Terence Tao/Hindustan Book Agency/978-9380250649 , Complex Analysis/Ahlfors L V/Mcgraw Hill/978-1259064821 , Complex Variables And Applications/James Ward Brown, Ruel V. Churchill/Mcgraw Hill/978-9354600364 , Functions Of One Complex Variable I/John B. Conway/Springer/978-0387903286 , Algebraic Topology/Allen Hatcher /Cambridge University Press/978-0521795401 , Topology/James Munkres/Pearson Education/978-9353432775 , Introduction To Topology And Modern Analysis /George Simmons/Mcgraw Hill Education/978-0070597846 , Introduction To Analytic Number Theory/Tom M. Apostol /Springer/978-1-4419-2805-4 , Topology Of Metric Spaces/S. Kumaresan/Narosa/978-81848705 , Topics In Algebra/I.N. Herstein/Wiley/978-8126510184 , Algebra/M Artin/Pearson Education India/978-9332549838 , Abstract Algebra/David S. Dummit, Richard M. Foote/Wiley/978-8126532285 , A First Course In Abstract Algebra/J.B. Fraleigh/Narosa Publishing House Pvt Ltd/978-8185015705 , Contemporary Abstract Algebra/Joseph A Gallian/Cengage India Private Limited/978-9353502522 , Linear Algebra/Kenneth M Hoffman And Ray Kunze/Prentice Hall India Learning Private Limited/978-9332550070 , Matrix Analysis/Roger A. Horn, Charles R. Johnson/Cambridge University Press/978-0521548236 , Topics In Matrix Analysis/Charles R. Johnson, Roger A. Horn/Cambridge University Press/978-0521467131 , Matrix Analysis/Rajendra Bhatia/Springer/978-0387948461 , Introduction To Linear Algebra/Gilbert Strang /Wellesley-Cambridge Press/978-09802327-7-6 , Linear Algebra And Learning From Data/Gilbert Strang/Wellesley-Cambridge Press/978-06921963-8-0 , Linear Algebra: A Geometric Approach/S. Kumaresan/Prentice Hall India Learning Private Limited/978-8120316287 , Differential Equations/Shepley L. Ross /Wiley/978-8126515370 , Theory Of Ordinary Differential Equations/Earl Coddington, Norman Levinson/Mcgraw Hill Education/978-0070992566 , Differential Equations: Theory - Technique And Practice /George Simmons/Mcgraw Hill Education/978-0070616097 , Introduction To Graph Theory/West/Pearson Education India/978-9332549654 , Graph Theory/Frank Harary/Narosa Publishing House/978-8185015552 , Spectral Graph Theory/Fan R. K. Chung/American Mathematical Society/978-0821803158 , Graphs And Matrices/Ravindra B. Bapat/Springer London Ltd/978-1848829800 , Spectra Of Graphs/Andries E. Brouwer, Willem H. Haemers/Springer/978-1489994332 , The Feynman Lectures On Physics Vol 3/Richard P. Feynman/Addison-Wesley/978-8185015842 , Quantum Computation And Quantum Information/M. A. Nielsen And I. L. Chuagn/Cambridge University Press/978-1107619197 , Principles Of Quantum Computation And Information: A Comprehensive Textbook/Giuliano Benenti, Giulio Casati/World Scientific Publishing Co Pte Ltd/978-9813279995 , Quantum Computing Explained/David Mcmahon/Wiley-Ieee Computer Society Pr/978-0470096994 , Coding Theory: A First Course/San Ling/Cambridge English/978-1108717540 , Elements Of Information Theory/Joy A. Thomas Thomas M. Cover/Wiley/978-8126541942 , First Course In Information Theory/Raymond W. Yeung/Springer Low Price Edition/978-8184897036 , Machine Learning: A Probabilistic Perspective/Kevin P. Murphy /The Mit Press/978-0262018029 , Introduction To Data Mining/Pang-Ning Tan Michael Steinbach Anuj Karpatne Vipin Kumar/Pearson/978-9354491047 , Data Warehousing: Fundamentals For It Professionals/Paulraj Ponniah/Wiley/978-8126537297 , An Introduction To Probability Theory And Its Applications Vol I/William Feller/Wiley/978-8126518050 , An Introduction To Probability Theory And Its Applications Vol Ii/William Feller/John Wiley & Sons Inc/978-8126518067 , A Textbook Of Algebra/Sudesh K Shah, Subhash Chand Garg/S.Chand/978-9352710829 , Introduction To Differential Geometry Of Space Curves And Surfaces/Taha Sochi/Create Space/1546735895 , Differential Geometry Of Manifolds/U. C. De, A. A. Shaiks/Narosa Publisher/ 978-8173197772 , Differential Geometry Of Manifolds/Lovett Stephen/Taylor & Francis Ltd/978-0367180461 , Adventures In Stochastic Processes/Sidney I. Resnick/Springer Science & Business Media/978-1461203872 , Statistical Methods/Kapil Sharma/Oxford Book Co./978-9350304693 , Statistics For Business And Economics/Dr. G.P. Yadav/Oxford Book Co./8185771545 , Statistics For Management /Ashish J. Dave/Oxford Book Co./978-9350300732 , Statistics For Management And Economics/Dr. G.P. Yadav/Oxford Book Co./978-8183765688 , Strategic Methods And Concepts Of Statistics/R.K. Jacob/Oxford Book Co./978-8183765800 , Vector Calculus/Dr. Rakesh Kumar Pandey/Oxford Book Co./978-9350304716 , A Course Of Mathematical Analysis/P K Mittal & /S.Chand/978-8121904728 , A Textbook Of Algebra/Subhash Chand Garg /S.Chand/978-9352710829 , A Textbook Of Discrete Mathematics/Dr. Swapan Kumar Sarkar/S.Chand/9788121922326 , A Textbook Of Vector Analysis/P K Mittal & /S.Chand/9788121922432 , A Textbook On Dynamics/M Ray & G C Sharma/S.Chand/9788121903424 , Advanced Differential Equations/Dr. M.D. Raisinghania/S.Chand/9788121908931 , Analytical Solid Geometry/P K Mittal & Shanti Narayan/S.Chand/9788121926614 , Applied Mathematics/N C Srinivas & Ch V Ramana Murthy/S.Chand/9788121920827 , Differential Calculus/Shanti Narayan & P K Mittal/S.Chand/9788121904711 , Differential Calculus For Competetions/Shanti Narayan/S.Chand/978-8121925136 , Dynamics/Dr. M.D. Raisinghania/S.Chand/978-8121926492 , Elementary Statistics/H C Saxena/S.Chand/978-8121909259 , Elements Of Real Analysis/Dr. M.D. Raisinghania & Shanti Narayan/S.Chand/9788121903066 , Experimental Statistics/Dr. K. Balaji/S.Chand/9788121935661 , Fourier Series And Integral Transforms/Dr. V. Ramesh Babu & S. Ranganatham/S.Chand/9789384319090 , Integral Calculus/P K Mittal & Shanti Narayan/S.Chand/9788121906814 , Integral Calculus For Competetion/P K Mittal & Shanti Narayan/S.Chand/9788121925358 , Integral Equations And Boundary Value Problems/Dr. M.D. Raisinghania/S.Chand/9788121928052 , Mathematical Statistics/J. N. Kapur & H.C. Saxena/S.Chand/9788121912464 , Mathematics For Degree Students/Dr. U.S. Rana/S.Chand/9788121941013 , Algebraic Topology: An Introduction/Naseer Khan/Oxford Book Co./978-9350303344 , Analysis On Manifolds: A Modern Approach To Mathematics & Physics/V.G. Gupta/Oxford Book Co./978-9350304242 , Applied Combinatorics /Luis J. Green/Oxford Book Co./978-9350304556 , Applied Partial Differential Equations/Dr. F.D. Wade/Oxford Book Co./978-8189473433 , Applied Statistics For Economics And Business/G.P. Gupta/Oxford Book Co./978-9350303825 , Basics Of Bioinformatics/Narayan Dubey/Oxford Book Co./978-9383096893 , Business Statistics For International Trade/Ashish J. Dave/Oxford Book Co./978-9383101030 , Calculus For Computer Graphics/Gopal Narayan/Oxford Book Co./978-9383096916 , Calculus With Vectors/Luis J. Green/Oxford Book Co./978-9383096053 , Computing Fundamentals/Gopal Narayan/Oxford Book Co./978-9350304624 , Elementary Bioinformatics/Dr. Satish Kumar Sinha/Oxford Book Co./978-9350304266 , Environmental Statistics With R/Dr. Manendra Kumar/Oxford Book Co./978-9350301333 , Essential Statistics For Business And Economics/Ashish J. Dave/Oxford Book Co./978-9383096176 , Essentials Of Bioinformatics/Dr. Ashish Gulwe/Oxford Book Co./978-9350303603 , Fuzzy Logic, Neural Network And Genetic Algorithms Handbook/Jan Bundschuh/Oxford Book Co./978-9383096039 , Handbook Of Bioinformatics/S.G. Sandhu/Oxford Book Co./978-8193470404 , Mathematical Logic/Dr. Savita Mishra/Oxford Book Co./978-9350304532 , Mathematical Modelling/Naseer Khan/Oxford Book Co./978-9382629733 , Mathematical Physics/Hilary D. Brewster/Oxford Book Co./978-9350303412 , Optimization Theory: Techniques Of Operation Research/V.G. Gupta/Oxford Book Co./978-9350304334 , Mechanics/Muthamizh Jayapragasam, Laxmi Duraipandian/S.Chand/9788121902724 , Ordinary And Partial Differential Equations/Dr. M.D. Raisinghania/S.Chand/9788121908924 , Probability And Quening Theory/P Kandasamy & /S.Chand/9788121923569 , Theory Of Functions Of A Complex Variable/P K Mittal & Shanti Narayan/S.Chand/9788121906395 , Vector Algebra/P K Mittal & Shanti Narayan/S.Chand/9788121909525 , Vector Analysis/Kayalal Pachaiyappa & P Duraipandian/S.Chand/9789384319694 , Statics/Md Motiur Rahman/New Central Book Agency Pvt. Ltd./978-8173810275 , Rigid Dynamics/Md Motiur Rahman/New Central Book Agency Pvt. Ltd./978-8173812248 , Higher Algebra[Classical And Modern]/Ram Krishna Ghosh/New Central Book Agency Pvt. Ltd./978-8173811043 , Numerical Analysis With Elements Of Computer Science/Apurba Narayan Das/New Central Book Agency Pvt. Ltd./978-8173817557 , Mathematical Analysis/Ajay Kumar Chaudhuri/New Central Book Agency Pvt. Ltd./978-8173817809 , Numerical Analysis/Kalyan Mukherjee/New Central Book Agency Pvt. Ltd./978-8173815201 , Linear Programming And Theory Of Games/Pyari Mohan Karak/New Central Book Agency Pvt. Ltd./978-8173814051 , Analytical Geometry And Vector Algebra/Ratan Mohan Khan/New Central Book Agency Pvt. Ltd./9788-173810169 , Analytical Dynamics Of A Particle Including Elements Of Statics/Shambhunath Ganguly/New Central Book Agency Pvt. Ltd./9788-173811630 , Differential Equations With Introduction To Laplace Transform/Apurba Narayan Das/New Central Book Agency Pvt. Ltd./978-8173816635 , Numerical Methods Practical/Shyamapada Dutta/New Central Book Agency Pvt. Ltd./978-8173815645 , A First Course On Operations Research And Information Theory/Sanat Kumar Mazumder/New Central Book Agency Pvt. Ltd./978-8173818844 , Advanced Business Mathematics And Statistics/Ram Krishna Ghosh/New Central Book Agency Pvt. Ltd./978-8173816741 , Engineering Mathematics/Rajkumar Roychoudhury/New Central Book Agency Pvt. Ltd./978-8173810909 , Analytical Dynamics Of A Particle/Sambhunath Ganguly/New Central Book Agency Pvt. Ltd./978-8173810497 , Integral Calculus/Kantish Ch Maity/New Central Book Agency Pvt. Ltd./97-88173817328 , Introduction To Number Theory/Ajay Kumar Chaudhuri/New Central Book Agency Pvt. Ltd./97881-73815867 , Mathematics And Statistics/Suranjan Saha/New Central Book Agency Pvt. Ltd./97881-73811838 , Mathematical Probability/Kartick Chandra Pal/New Central Book Agency Pvt. Ltd./978-8173817816 , Differential Geometry/Fr F Goreux/New Central Book Agency Pvt. Ltd./978-8173815669 , Introduction To Tensor Calculus/Fr F Goreux/New Central Book Agency Pvt. Ltd./9788-173818516 , Vector Analysis Tensor Analysis And Linear Vector Space/S P Kuila/New Central Book Agency Pvt. Ltd./9789-352550333 , Introduction To Discrete Mathematics/M K Sen/New Central Book Agency Pvt. Ltd./97881-87134886 , Topics In Mathematics/Sandip Banerjee/New Central Book Agency Pvt. Ltd./97881-87134466 , Advanced Linear Programming & Game/A Mukherjee/New Central Book Agency Pvt. Ltd./97893-84294083 , Application Of Calculus/Debasish Sengupta/New Central Book Agency Pvt. Ltd./97881-87134626 , Analytical Statics/S A Mollah/New Central Book Agency Pvt. Ltd./97893-84294427 , Basic Concepts Of Numerical Methods, Probability And Statistics/Sandip Banerjee/New Central Book Agency Pvt. Ltd./97881-87134947 , Numerical Analysis And Computational Procedures/S A Mollah/New Central Book Agency Pvt. Ltd./97881-87134107 , An Introduction To Probability And Probability Distributions/Rajeshwar Singh/New Central Book Agency Pvt. Ltd./978938-4294175 , Dynamics Of Rigid Bodies/S A Mollah/New Central Book Agency Pvt. Ltd./978818-7134985 , Differential Geometry/M Majumdar/New Central Book Agency Pvt. Ltd./978938-4294144 , Advanced Higher Algebra/A N Das/New Central Book Agency Pvt. Ltd./978938-4294021 , Introduction To Abstract And Linear Algebra/Ajay Kumar Chaudhuri/New Central Book Agency Pvt. Ltd./97893-52550586 , Design Of Experiments And Sampling Methods/K C Bhuyan/New Central Book Agency Pvt. Ltd./97893-52550234 , Engineering Mathematics/T Veerarajan/Mcgraw Hill Education/ 97-0071328777 , Engineering Mathematics Ii/T Veerarajan/Mcgraw Hill Education/978-9387432345 , Advanced Engineering Mathematics/Ravish R. Singh/Mcgraw Hill Education/97-89353161033 , Discrete Mathematics/T Veerarajan/Mcgraw Hill Education/978-9353161606 , Business Mathematics And Statistics/N G Das, J. K. Das/Mcgraw Hill Education/978-0071333399 , A First Course In Mathematics For Management/M. Raghavachari/Mcgraw Hill Education/978-0070965706 , Fundamentals Of Mathematical Analysis/G. Das, S. Pattanayak/Mcgraw Hill Education/978-0074515730 , Introduction To Linear Algebra With Applications/James Defranza, Daniel Gagliardi/Mcgraw Hill Education/978-1259025587 , Numerical Methods With Programs In C/T Veerarajan, T Ramachandran/Mcgraw Hill Education/978-0070601611 , Ordinary And Partial Differential Equations With Laplace Transforms, Fourier Series And Applications/V. Sundarapandian/Khanna Publishers/978-1259004568 , Higher Engineering Mathematics/B.S. Grewal/Khanna Publishers/978-81-933284-9-1 , Discrete Mathematics And Its Applications/A. Tamilarasi And A.M. Natarajan/Khanna Publishers/978-81-7409-151-2 , Functions Of Complex Variables/A.K. Mukhopadhyay/Khanna Publishers/N/A , Numerical Methods In Engineering & Science With Programs In C, C++ & Matlab/B.S. Grewal/Khanna Publishers/978-81-7409-248-9 , An Introduction To The Calculus Of Variation For Engineers And Economics/A.K. Mukhopadhyay/Khanna Publishers/978-81-7409-186-4 , Engineering Mathematics/Mukul Bhatt/Mcgraw Hill Education India Pvt. Ltd/9789390000000 , Convective Heat And Mass Transfer/Adrian Bejan/John Wiley And Sons/978-0-470-90037-6 , Perspective In Environmental Studies/Anubha Kaushik And C P Kaushik/New Age International Publishers/978-93-86418-63-0 , Engineering Mechanics (Statics And Dynamics)/Dr D S Kumar/S K Karatia And Sons/978-93-5014-292-9 , Fundamentals Of Acoustics/Lawrence E. Kinsler, Austin R. Frey, Alan B. Coppens, James V. Sanders/Wiley/978-0-471-84789-2 , Foundations Of Engineering Acoustics/Frank Fahy/Academic Press/Elsevier/978-0122476655 , The Theory Of Sound, Volume I/Lord Rayleigh & Robert B. Lindsay/Dover Publications Inc./978-0486602929 , Mechanical Vibration/S.S. Rao/Pearson Education India/978-8177588743 , Vector Mechanics For Engineers: Statics And Dynamics/Beer, Johnston, Cornw Ell& Sanghi/Mcgraw Hill Education/978-1259062919 , Entrepreneurship Development And Small Business Enterprises/Charantimath Poornima M./Pearson/9353066263 , Entrepreneurial Development/Khanka S.S./S Chand/8121918014 , Mechanical Vibrations/Debabrata Nag/Wiley/978-8126530908 , Design Of Machine Elements/Dr.G.K.Vijayaraghav An&Dr.S.Vishnupriyan/Laxmi Publications/8192048535 , Introduction To Dynamics/Amitabha Ghosh/Springer/978-981-10-6094-6 , Mechanics Of Laminated Composite Plates And Shells – Theory And Analysis/J.N. Reddy/Crc Press/978-0203502808 , Composites: Science And Technology/Dr. R. C. Prasad, Dr. P. Ramakrishnan/New Age International (P) Ltd., Publishers/978-8122412512 , Product Design And Development/Karl Ulrich, Steven Eppinger And Maria C. Yang/Mc Graw Hill/978-1260043655 , Mechatronics: Integrated Mechanical Electronic Systems/K.P. Ramachandran, G.K. Vijayaraghavan, M.S.Balasundaram/Wiley India/978-8126518371 , Groovers Principles Of Modern Manufacturing Si Version/Mikell P. Groover/Wiley India/978-8126573059 , Manufacturing Science : Metal Cutting, Conventional And Non-Conventional Machine, Welding, Volume - Ii/G.S. Sawhney/Wiley India/97-89389520408 , Project Planning And Control With Pert And Cpm/Dr. B.C. Punmia, K.K. Khandelwal/Laxmi Publications (P) Ltd/978-8131806982 , Cad/Cam Theory And Practice/Ibrahim Zeid, R Sivasubramanian/Mcgraw Hill Education/978-0070151345 , Optimization For Engineering Design/Kalyanmoy Deb/Prentice Hall India Learning Private Limited/978-8120346789 , Mechanical Vibrations /G Kgrover/Nem Chand And Brothers /978-81-85240-56-5 , Tribology: Friction And Wear Of Engineering Materials /Ian Hutchings And Philip Shipway/Elsevier/978-0-08-100910-9 , Business Statistics: Text And Problems - With Introduction To Business Analytics/Nd Vohra/?Mcgraw Hill Education /978-9390727063 , Statistics For Management/Richard I. Levin, Masood H. Siddiqui, David S. Rubin, Sanjay Rastogi, /?Pearson Education/978-8184957495 , Financial Accounting/Sn Maheshwari, Suneel K Maheshwari,Sharad K Maheswari/?Vikas Publishing House/978-9352718535 , Management Accounting Principles & Practice/Shashi K. Gupta , R.K. Sharma, Neeti Gupta /Kalyani Publishers/N/A , Organizational Behaviour /Stephen P. Robbins, Timothy A. Judge , Neharika Vohra/?Pearson Education/978-9356064270 , Organisational Behaviour: Text, Cases & Games/K. Aswathappa/Himalaya Publishing House/978-93-5693-187-9 , Modern Microeconomics /A. Koustsoyiannis/?Palgrave Macmillan;/978-0333253496 , Business Law /Nd Kapoor /?Sultan Chand And Sons /978-9389174106 , Marketing Management /Phillip Kotler /?Pearson Education/978-9356062665 , Dominic Salvatore International Economics /Chandan Sharma /Wiley /978- 9354247170 , International Business /Charles W .L .Hill/?Mcgraw Hill/978-9355324771 , Strategic Management ( Concept & Cases )/Fred R David , Forest R David/Pearson Education/978-9332548930 , Production And Operations Management/Sn Chary/Mcgraw Hill/978-9353164812 , Production And Operations Management/E Anil Kumar , N Suresh/New Age International/978-8122421774 , E Commerce /Kenneth C. Laudon , Carol Guercio Traver/?Pearson Education/978-9356060647 , Entrepreneurship /Arya Kumar/Pearson Education /978-8131765784 , Corporate Finance /Ross , Westerfield ,Jaffe , Jordan /Mcgraw Hill /978-9390727926 , Security Analysis And Portfolio Management /Donald E. Fisher, Ronald J. Jordan, A.K . Pradhan /Pearson Education /978-9353066284 , Investment Analysis And Portfolio Management |/Prasanna Chandra /Mcgraw Hill /978-9354600074 , Advertising And Sales Promotion/Shh Kazmi, Satish Batra/Excel Books/978-8174466396 , Advertising And Sales Promotion ( An Integrated Marketing Communications Perspective)/George E Belch, , Michael A Belch, Keyoor Purani/Mcgraw Hill /978-9354600807 , Strategic Brand Management/Kevin Lane Keller , Vanitha Swaminathan, Ambi Mg Parameswaran , Issac C Jacob /Pearson Education /978-9353946135 , Human Resource Management: Text And Cases/ K. Aswathappa , Sadhna Dash/Mcgraw Hill /978-9355323675 , Managerial Economics And Business Strategy/Micheal R. Baye , Jeffery T . Prince/Mcgraw Hill/978-9354600203 , Intellectual Property Law/Avtar Singh/Eastern Book Company/978-9350289853 , Law Relating To Intellectual Property Rights/V K Ahuja/Lexis Nexis/978-8131251652 , Intellectual Property Rights Manual/Sumeet Malik/Eastern Book Company/978-9351452300 , Law Relating To Intellectual Property/Dr. B.L. Wadehra/Universal Law Publishing/978-9350350300 , Consumer Behavior/Kumar Leon G., Schiffman;Joe, Wisenblit;S. Ramesh/Pearson Education/978-9353069834 , Purchasing And Inventory Control/K S Menon And Sarita Kulkarni/ Shroff Publishers/978-8184047066 , Production Systems: Planning, Analysis, And Control/James L. Riggs /? John Wiley & Sons/? 978-0471847939 , A Textbook Ofmanufacturing Technology (Manufacturing Processes)/R K Rajput/ Laxmi Publications/? 978-8131802441 , A Textbook Of Material Science And Metallurgy /O P Khanna/Dhanpat Rai /978-8189928315 , Atomic Physics/Max Born (Author) , J. M. Radcliffe (Translated) R. J. B-. Stoyle (Translated)/Dover Publications/978-0486659848 , Concepts Of Atomic Physics/S P Kuila /New Central Book Agency (Ncba)/978-9352550838 , Fundamentals Of Molecular Spectroscopy/Banwell/Mcgraw Hill Education/978-9352601738 , Introduction To Nuclear And Particle Physics/V.K. Mittal, R.C. Verma, S.C. Gupta /Phi Learning/978-9387472617 , Concepts Ofnuclear Physics/Bernard Cohen/Mcgraw Hill Education/978-0070992498 , Nuclear And Particle Physics: An Introduction/B.R. Martin/Wiley/978-8126565078 , Introduction To Elementary Particle Physics/Alessandro Bettini/Cambridge University Press/978-1107050402 , Solid State Physics/Ashcroft, Mermin/Cengage Learning/978-8131500521 , Physics Of Semiconductor Devices/S.M. Sze, Kwok K. Ng /Wiley/978-8126517022 , Semiconductor Physics And Devices (Sie)/Donald Neamen (Author), Dhrubes Biswas/Mcgraw Hill Education/978-0071070102 , Liquid Crystal Sensors/Albert Schenning (Editor), Gregory P. Crawford (Editor), Dirk J. Broer (Editor)/Crc Press/978-1498729727 , Liquid Crystals: Experimental Study Of Physical Properties And Phase Transitions/Satyendra Kumar/Cambridge University Press/978-0521187947 , Liquid Crystals I/M.A. Athanassopoulou, M.A. Bates, Et Al./Springer/978-3662147160 , Dielectric Effect In The Isotropic Phase Of Liquid Crystal Materials/Mukherjee Prabir,Drozd-Rzoska Aleksandra,Rzoska Sylwester/Lambert Academic Publishing,/9783660000000 , Nanoscience With Liquid Crystals: From Self-Organized Nanostructures To Application/Quan Li/Springer/978-3319377124 , Fundamentals Of Mathematical Physics/A. B. Gupta/Books & Allied (P) Ltd/81-87134-23-2 , Higher Mathematical Physics/H. K. Das And Dr Rama Verma/S. Chand & Company Pvt. Ltd/978-93-83746-77-4 , Head Thermodynamics And Statistical Physics/Brij Lal, N. Subrahmanyam And P. S. Hemne/S. Chand & Company Pvt. Ltd/81-219-2813-3 , The Physics Of Solar Cells : Perovskites, Organics, And Photovoltaic Fundamentals/Juan Bisquert/Crc Press/9781138099968 , Nanomaterials And Nanocomposites: Synthesis, Properties, Characterization Techniques, And Applications/Rajendra Kumar Goyal/Crc Press/9781498761666 , Callisters Materials Science And Engineering./Balasubramaniam/Wiley India/9788126541607 , Introduction To Physics /Cutnell/Wiley India/9788126556021 , Physics, Vol 1, 5Ed , An Indian Adaptation /Halliday/Wiley India/9789354640384 , Physics, Vol 2, 5Ed, An Indian Adaptation /Halliday/Wiley India/9789354640438 , Principles Of Physics, 10Ed/Halliday/Wiley India/9788126552566 , Statistical Mechanics, 2Ed, An Indian Adaptation/Huang/Wiley India/9789354247736 , Classical Electrodynamics, An Indian Adaptation /Jackson/Wiley India/9789388991070 , Kittels Introduction To Solid State Physics, Wiley India Edition/Kittel/Wiley India/9788126578436 , Modern Physics, 4Ed, An Indian Adaptation /Krane/Wiley India/9789354244681 , Material Science: Nanotechnology And Applications /Kumar/Wiley India/9789390455317 , Introduction To Nanoscience And Nanotechnology, An Indian Adaptation /Poole/Wiley India/9789354240201 , Applied Solid State Physics/Rajnikant/Wiley India/9789354643309 , A Textbook Of Astronomy And Astrophysics /Sharma/Wiley India/9789389520903 , Tensors: Concepts And Applications With Scilab Programs/Soni /Wiley India/9789389633207 , Engineering Physics, As Per Aicte /Wiley Editorial Team/Wiley India/9788126521418 , A Textbook Of Applied Physics, Vol I/Jha/Wiley India/9789389307405 , A Textbook Of Applied Physics, Vol Ii/Jha/Wiley India/9789389520453 , Mathematical Methods In The Physical Sciences, 3Ed, An Indian Adaptation /Boas/Wiley India/9789354644252 , Fundamentals Of Fluid Mechanics/Sawhney/Wiley India/9789389698008 , Quantum Mechanics Concepts And Applications/Nouredine Zettili/Wiley India/978-0-470-02678-6 , Introductory Nuclear Physics/S. Krane Kenneth/Wiley India/978-8126517855 , Principles And Applications Of Ferroelectrics And Related Materials/M. E. Lines And A. M. Glass/Oxford University Press/978-0198507789 , A Modern Introduction To Quantum Field Theory/Michele Maggiore/Oxford University Press/978-0198520740 , The Physics Of Solids/J. B. Ketterson/Oxford University Press/978-0198742906 , Introduction To Spintronics/Supriyo Bandyopadhyay/Routledge/978-0367656447 , Perovskite Metal Oxide/Moharana/Elsevier/9780320000000 , Materials Characterization Techniques/Lin Li, Sam Zhang,Ashok Kumar/Crc Press/?978-1032064208 , Magnetic Measurement Techniques For Materials Characterization/Victorino Franco/Springer/978-3030704452 , Indentation Techniques In Ceramic Materials Characterization: Theory And Practice/Ahmad G.Solomah/Ceramics Transaction/978-1574982121 , Element Of X-Ray Diffraction/B D Cullity/Pearson Education India/9789332535169 , Introduction To Magnetic Materials/B D Cullity/Wiley-Ieee Press/978-0471477419 , Symmetry And Spectroscopy: An Introduction To Vibrational And Electronic Spectroscopy/Daniel C Harris/Dover Pubns/978-0486661445 , The Spectra And Structures Of Simple Free Radicals: Introduction To Molecular Spectroscopy/Gerhard Herzberg/Dover Pubns/978-0486658216 , An Introduction To Practical Infra-Red Spectroscopy/A D Cross/Dover Pubns/978-1489962744 , Handbook On The Physics And Chemistry Of Rare Earths: Optical Spectroscopy/Karl A.Gschneidner/North-Holland/978-0444521446 , Molecular Spectroscopy/Jackd.Graybeal/Mcgraw-Hill Education(Ise Edition)/978-0070243910 , Fundamentals Of Statistical And Thermal Physics/Frederick Reif/Sarat Book Distributors/9789380663142 , Thermodynamics And An Introduction To Thermostatistics/H. B. Callen/John Wiley & Sons Inc/9780471862567 , Introduction To Phase Transitions And Critical Phenomenon (International Series Of Monographs On Physics)/H. E. Stanley/Oxford University Press/9780195053166 , A Guide To Monte Carlo Simulations In Statistical Physics/David P. Landau And Kurt Binder/? Cambridge University Press;/9781139696463 , Statistical Mechanics/R. K. Pathria/Elsevier/9789351073970 , Computational Methods In Physics And Engineering/Samuel S M Wong/World Scientific/9810230435 , Mathematical Methods Of Physics/Jon Mathews And Robert L. Walker/?Pearson Addison-Wesley/805370021 , A Text Book Of Integrated Engineering Physics /Amal Chakraborty/Chhaya Prakashani Pvt Ltd/978-81-906486-1-5 , A Text Book Of Basic Engineering Physics/Amal Chakraborty/Chhaya Prakashani Pvt Ltd/978-8190648615
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 11
Tripura View Result →
33.
Rural Development #9371570 Technical Bid
Tender For Solar Energy Based Water Supply Scheme,Rain Water Harvesting In Zp Bhandara - Solar Energy based Water Supply Scheme 2 Providing , installing and giving test of 0.5 HP SPV submersible pump(DC) of Borewell (900 Watt per Hp ) with all necessary attachments & (450 watt per Hp PV Module) as peras per MNRE letter no 318/38/2018-GCRTdtd 25/06/2020asMotor pumpset -0.5HP, 450 W submersible pumpsetbrushless DC pump (B.L.D.C.) DC volt 90-300 V, AC volt 90-240 V, inbuilt Controller 3 Providing , installing and giving test of 1.0 HP SPV submersible pump(DC ) of Borewell (900 Watt per Hp ) with all necessary attachments & (900 watt per Hp PV Module) asas perMNRE letter no 32/24/2020-SPV Division dtd 18/08/2021 Motor pumpset -1.0HP, 900 W submersible pumpsetbrushless DC pump (B.L.D.C.) DC volt 90-300 V, AC volt 90-240 V,inbuilt controller 4 Providing , installing and giving test of 2.0 HP SPV submersible pump(DC/AC ) of Borewell (900 Watt per Hp ) with all necessary attachments & (900 watt per Hp PV Module) as perMNRE letter no 32/24/2020-SPV Division dtd 18/08/2021as per Motor pumpset - 2.0HP, 900 W submersible pumpsetbrushless DC pump (B.L.D.C.) DC volt 90-300 V, AC volt 90-240 V, Inbuilt controller 5 Providing , installing and giving test of 3.0 HP SPV submersible pump(DC/AC ) of Borewell (900 Watt per Hp ) with all necessary attachments & (900 watt per Hp PV Module)as perMNRE letter no 32/24/2020-SPV Division dtd 18/08/2021 as perMNRE technical specification Annexure I and II 6 Providing , installing and giving test of 5.0 HP SPV submersible pump(DC/AC ) of Borewell (900 Watt per Hp ) with all necessary attachments & (900 watt per Hp PV Module)as perMNRE letter no 32/24/2020-SPV Division dtd 18/08/2021as perMNRE technical specification Annexure I and II . 7 Providing , installing and giving test of 7. 5 HP SPV submersible pump(DC/AC ) of Borewell (900 Watt per Hp ) with all necessary attachments & (900 watt per Hp PV Module)as perMNRE letter no 32/24/2020-SPV Division dtd 18/08/2021 as perMNRE technical specification Annexure I and II . 8 Providing , installing and giving test of 10.00 HP SPV submersible pump(DC/AC ) of Borewell (900 Watt per Hp ) with all necessary attachments & (900 watt per Hp PV Module)as perMNRE letter no 32/24/2020-SPV Division dtd 18/08/2021as perMNRE technical specification Annexure I and II . 9 a) installation and ccommissioning of 1.0 Hp Solar Pump submersible pumpsetbrushless DC pump with inbuilt controller (B.L.D.C.) DC volt 30-300 V, AC volt 90-240 V, Maximam shut off head - 120 meter Discharge -10000 lit per day for 90 meter dynamic head. 10 a) installation and ccommissioning of 2.0 Hp Solar Pump submersible pumpsetbrushless DC pump with inbuilt controller (B.L.D.C.) DC volt 30-300 V, AC volt 90-240 V, Maximam shut off head - 120 meter Discharge -15000 lit per day for 90 meter dynamic head. 11 a) installation and ccommissioning of 3.0 Hp Solar Pump submersible pumpsetbrushless DC pump with inbuilt controller (B.L.D.C.) DC volt 100-300 V, AC volt 90-240 V, Maximam shut off head - 130 meter Discharge -28000 lit per day for 105 meter dynamic head. 12 Controllerfor 3.0 hp Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 13 ControllerFor 5.0 HP Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 14 ControllerFor7.50 HP Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 15 ControllerFor 10.0 HP Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 16 ControllerFor 12.50 HP Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 17 Hybrid ControllerFor 15.00 HP Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 18 ControllerFor 20.00 HP Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 19 ControllerFor 25.00 HP Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 20 Hybrid ControllerFor 30.00 HP Auto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is availableAuto switching between Grid and Solar Pump can be operated on both solar and grid, Solar is given first preference. In case Solar Power generation is not sufficient to run pump, then pump operation will switch to grid unit till solar power is available with 5 year cmc 21 GPS System Auto start/stop/ capability with remote tank full sensing and control This will include:-sensors Data transmission to server- control command to the solar water pump.controller based upon tank is full or not.- Power supply to the data collection /transmission unit.This power supply needs to be batterybacked (with lithium ferrous phosphate battery )-Charge controller for battery charging-12Wp solar panel5 years CMC and maintenance 22 Supply of special water Chamber s per GSDA year 2022-23 23 Supply of SS Nipple (as perGSDA year 2022-23 approved 24 Supplying and erecting ISI mark of HDPE pipe 32mm dia. Suitable for pressure of 6 kg/cm2 connected to submersible cable (PWD electrical CSR 2023-24 i 25 Supplying and erecting ISI mark of HDPE pipe 50 mm dia. Suitable for pressure of 6 kg/cm2 connected to submersible cable (PWD electrical CSR 2023-24 i 26 supply and erecting flat Flexible Submersible Cable with Copper Conductor PVC insulated and PVC Sheathed3 core 2.5 Sq. mm as per IS -694 Marked as per _PWD electrical DSR 2023-24 item no CB-12-4.-8Page. No.219 27 supply and erecting flat Flexible Submersible Cable with Copper Conductor PVC insulated and PVC Sheathed3 core 4 Sq. mm as per IS -694 Marked as per _PWD electrical DSR 2021 item no CB-12-4.-8Page. No.219 28 supply and erecting flat Flexible Submersible Cable with Copper Conductor PVC insulated and PVC Sheathed3 core 6 Sq. mm as per IS -694 Marked as per _PWD electrical DSR 2021 item no CB-12-4.-8Page. No.219 29 extension of Casing pipe IS 1239 for Hand pump pedastal assembly as per GSDA year 2022-23 approved rate 30 Repairing existing platform as per zp bhandara drillinge-tender year2022-23 31 Yield test charges of borewell as perGSDA year2022-23 32 Redrilling or Flushing Borewell 33 Water Tanker for bore well acceptance test 34 Removal & Installation of Hand pumpsas perGSDA year 2022-23 35 Excavation for foundation in earth soil of all types sand, gravel & soft murum, including removing the excavated material up to a distance of 50 Meter & stacking, spreading as directed, normal dewatering the bed for foundation & excluding back filling etc. complete( MJP DSR 2022-23 Sect. E- item no -1 page no.27 ) 36 Excavation for foundation in earth soil of all types sand, gravel & hard murum, including removing the excavated material up to a distance of 50 Meter & stacking, spreading as directed, normal dewatering the bed for foundation & excluding back filling etc. com.( MJP DSR 2022-23 Sect. E-item no 2 page no. 27 ) 37 Excavation for foundation in earth soil of all types sand, gravel & hard murumwith Boulder including removing the excavated material up to a distance of 50 Meter & stacking, spreading as directed, normal dewatering the bed for foundation & excluding back filling etc. com.( MJP DSR 2022-23 Sect. E-item no 3 page no. 27 ) 38 for foundation/ pipe trenches in Hardrock and Concrete Road by chieselling , wedging ,line drilling by mechanical Means or by all Means other than blasting including trimming and levelling the bed , removing the excavated material upto distance of 50m beyond the area of Lift as below , stacking as directed by Engineer in charge, normal dewatering, excluding backfilling, etc complete by all means.( Bd-A- 1/259) { MJP DSR2022-23 Section E Item no 07 page no.43 39 Providing dry trap /granite / quartzite / gneiss rubble stone soling in 15 cm to 20 cm thick layers including hand packing & compacting, etc. compl.( MJP DSR 2022-23 Sect. E-item 18page no. 30 ) 40 Supplying and Laying of stone aggregate 10 mm to 20 mm nominal gauge in the foundation / base including watering and ramming Stone Aggregate 10 mm MJP SSR 2023-24 Section A Sr. No. 49 page No. 13 41 Providing and laying Castin situ / Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steelcentering, formwork, laying / pumping, compacting, roughening the mif special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enable dreversible Drum Type mixer / concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)PWD SSR 2022-23 Sr. No. 832 Page No. 215 42 Supplying and Laying of washed river sand including carriage to site, loading and unloading, laying in base and top of pit, watering and ramming consolidating and dressing complete.Fine sand (from river sand at site) MJP SSR 2021-22 Section M Sr. No. 10 e page No. 230 43 Geotextile 400 GSM (grams per sqm membrane) 44 Supply and installation of Co-polymer based rainwater harvesting structure including supply of Crosswave CW-HYQ of size 494 mm x 494 mm x 220 mm with minimum void ratio of 94.7% having a weigth of 1.8 kg and specers having size of 988 mm x 240 mm x 25 mm having a weight of 0.8 kg of approved make including deboarding og structure inside the tank, lowering it as per diamention including covering it with spacer etc. complete in all respect 45 Making perforation to casing pipe 1 mtr. height from the base of Moduler filter 46 6 PVC Cap AS PER gsda rate 47 Providing & laying in situ followingM150 C.C.of trap / granite/ gneiss metal for foundation & bedding including dewatering , form work , compacting & curing finishing etc. complete( MJP DSR 2022-23 Sect. G -item no 1b page no. 48 48 Column- Providing & casting in situ C.C. of trap granite/Quartzite/ gneiss metal of approved qualityfor RCC work as per detailed drawing & design or as directed by engineering in charge including normal drawing, centering, form work, compaction finishing the formed surfaces with CM 1 : 3 sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if special finish is to be provided & curing etc. complete. RCC M 250( MJP DSR 2022-23 Sect. G item no 3c page no. 49) 49 Horizontal Beam - Providing & casting in situ C.C. of trap granite/Quartzite/ gneiss metal of approved qualityfor RCC work as per detailed drawing & design or as directed by engineering in charge including normal drawing, centering, form work, compaction finishing the formed surfaces with CM 1 : 3 sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if special finish is to be provided & curing etc. complete. RCC M 250( MJP DSR 2022-23 Sect. G item no 4c page no.49) 50 Providing & fixing in position steel bar reinforcement of various dia. For RCC work like foundation, beams, column etc as per detailed drawing design including cutting, bending, hooking the bars binding with wires or track welding & supporting as required etc. complete. for Solar( MJP DSR 2022-23 Sect. G- item no 8b page no. 52) 51 Filling in plinth & floors murum bedding in trencheswith approved murum from excavated materials from foundation. 15 cm to 20 cm layers including watering & compaction complete. ( MJP DSR 2022-23 Sect. G- item no 8b page no. 49) 52 Fillingin plinth and Floor/ trenches with contractor murum for bedding in 15cm to 20cm layer including waterin and compaction complete ( MJP DSR 2022-23 Sect.E item no 17 page no. 42 ) 53 For structureProviding structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc. as per detailed design and drawing or as directed by engineer in charge including cutting fabricating hoisting erecting and fixing in position making riveted bolted welded connections and one coat of anticorrosive paint and over it two coats of oil painting etc. completeBd-C-8/278 MJP DSR 2022-23 Sect. F item no 6 54 Providing and applying 2 coats of alluminium paint of approved make to new structural steel work in buildings and workshops including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat)etc. Complete PWD DSR 2022-23 35.06 BDO 4A 55 Providing and applying primer and one coat of red oxide of Iron Paint externally including cleaning the surface of pipe with steel scrapers wire brushes and metal cleaning solution etc completePWD DSR 2022-23 35.07 BDO 5(Sect. I (XVI) Item no 18 page no. 185)282 56 For structure (PLUS ) Providing and applying material & labour for hot dip galvanizing of above structure including transportation for galvanizing As per MARKET RATE 57 For structure- Transporting charges of vehicle per trip for Appox. 100 km leadincluding loading unloading & stacking charges. MJP DSR 2023-24 Sect. C statement iv page no. 11 58 Providing & erecting chain link fencing 1.6 mtr height with G I chain linkof size 50 x 50 mm 8 SWG thick and fixed 75 mm above GL verticalM.S. angle of 40 x 40 x 6 mm size embedded in cc block 1 :4: 8 mix of size 450 x 450 x 670 mm at 1.75 m centre to centre with iron bar 16 mm dia as a hold fast including welded link with angle frame at 30 cm centre to centre nuts & bolts & horizontal MS angle at top& bottom of 25 x 25 x5 mm size & vertical MS flat 35 x 5 mm & 25 x5 mm horizontal including cross supports of 40 x 40 x 6 mmangle both sides at every corner in cc with 3 coat of oil painting etc complete (PWD SSR 2022-23 Bd-W-Item No.46.39 Page No 285) 59 Providing & fixingM S grill gate withframe having weight of gate 20 kg/sqm as per the detailed drawing including hinges, pivot blocks locking arrangement welding riveting and three coats of oil painting of approved shed etc. complete. (PWD SSR 2023-24 Bd-W- 6, Item No.23.09 60 Providingandfixingmildsteelgrillgatewithangleironframe65mmx65mmx10mmwithironbarsat150mmC/Canddiagonalflatsasperthedetaileddrawingincludinghinges,pivotblocklockingarrangement,weldingrivetingandoilpaintingofthreecoatsof approved shade Weight of gate 35 Kilogram/Smt.(PWD SSR 2022-23 Bd-W- 6, Item No.44.10 61 Providing second class Burnt Brick masonry with conventional/I.S.type brick since mentmortar 1:6 in foundation sand plinth of inner walls / in plinthe xternal walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. PWD SSR 2022-23 Sr. No. 894 Page No. 242 I.No. 27.01 62 Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for RCC work in foundations like rauft, strip , Foundations, etc. Comp..... PWD SSR 2022-23 Sr. No. 841 Page No. 219I.No. 25.11 63 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). MJP SSR 2023-24 Sr.No. II 1 B VII 64 Providing and fixing board displaying information such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc having rectangular shape of 1.20m x 0.90m size made out 18 guage (1.25mm) thick mild steel sheet painted with one coats of azainc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc size 35 x 35 x 3 mm frame with property cross braced M.S angles of size 35mm x 35mm x 3mm duly painted including Two M.S angle iron posts of size 65mm x 65 mm x 6mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1:4:8 concrete block on size 60 cm x 75 cm including excavation, refilling, transporations and labour etc complete.PWD - CIVIL CSR :- 2022-23 I.No- 6.36 Pno.60 65 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polyethyleneand built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 100 to 1000 liters as per IS- 12701 as per PWD SSR 2022-23item No. 42.53 reference BDV page No. 300 66 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polyethyleneand built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 liters as per IS- 12701 as per PWD SSR 2022-23item No. 42.54 reference BDV page No. 300 67 Providing & laying of ISI mark GI pipe of medium class 25 mm Dia. Including all local & central taxes, octroi, inspection charges, transportation to sores, etc. complete. With one end coupling for full length pipe. As per IS 1239 / 2004 MJP DSR 2019-20 Sect.I (IV) item no 1 b-3 page no.70 & item no .2 b-3 page no. 99. 68 Providing & laying of ISI mark GI pipe of medium class 50 mm Dia. Including all local & central taxes, octroi, inspection charges, transportation to sores, etc. complete. With one end coupling for full length pipe. As per IS 1239 / 2004 MJP DSR 2019-20 Sect.I (IV) item no 1 b-3 page no.70 & item no .2 b-3 page no. 99. 69 Providing & laying of ISI mark GI pipe of medium class 65 mm Dia. Including all local & central taxes, octroi, inspection charges, transportation to sores, etc. complete. With one end coupling for full length pipe. As per IS 1239 / 2004 MJP DSR 2022-23Sect .I (IV) item no 1 b-3 page no.70 & item no .2 b-3 page no. 99. 70 Providing and Fixing G.I Specials such as Bend, Tee, Coupler as MJP Elect. /mechCSR 2022-23 Item no. PW2-3-4-5,Pw1-7 page no. 14,1565mm dia Elbow 71 Providing and Fixing G.I Specials such as Bend, Tee, Coupler as MJP Elect. /mechCSR 2022-23 Item no. PW2-3-4-5,Pw1-7 page no. 14,15 25mm dia Elbow 72 Providing and Fixing G.I Specials such as Bend, Tee, Coupler as MJP Elect. /mechCSR 2022-23 Item no. PW2-3-4-5,Pw1-7 page no. 14,15 65mm dia Tee 73 Providing and Fixing G.I Specials such as Bend, Tee, Coupler as MJP Elect. /mechCSR 2022-23 Item no. PW2-3-4-5,Pw1-7 page no. 14,15 25 mm dia Tee 74 Providing and Fixing G.I Specials such as Bend, Tee, Coupler as MJP Elect. /mechCSR 2022-23 Item no. PW2-3-4-5,Pw1-7 page no. 14,15 65 mm dia Coupler / socket 75 Providing and Fixing G.I Specials such as Bend, Tee, Coupler as MJP Elect. /mechCSR 2022-23 Item no. PW2-3-4-5,Pw1-7 page no. 14,15 25 mm dia Coupler / Socket 76 Providing and Fixing G.I Specials such as Bend, Tee, Coupler as MJP Elect. /mechCSR 2022-23 Item no. PW2-3-4-5,Pw1-7 page no. 14,15 G.I. Union Duty 25mm 77 Providing and Fixing G.I Specials such as Bend, Tee, Coupler as MJP Elect. /mechCSR 2022-23 Item no. PW2-3-4-5,Pw1-7 page no. 14,15 G.I. Union Duty 65mm 78 Lowering Laying and jointing G. I Pipes and specialsof following class and Dia including conveyence from store to site of work. Medium classMJP DSR2022-23 sect. 1-4 Item no.- 2-b p.no.102 A) 25 mm Dia. 79 Lowering Laying and jointing G. I Pipes and specialsof following class and Dia including conveyence from store to site of work. Medium classMJP DSR2022-23 sect. 1-4 Item no.- 2-b p.no.102 A) 50 mm Dia. 80 Lowering Laying and jointing G. I Pipes and specialsof following class and Dia including conveyence from store to site of work. Medium classMJP DSR2022-23 sect. 1-4 Item no.- 2-b p.no.102 B ) 65 mm Dia. 81 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joint including cost of coupler as per Isi specification no. 49856/1998 excluding GST levied by GOI and GOM in all respect , including transportation ,freight charges , inspection charges loading, unloading , conveyance to the department stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement etc (self fit type to be jointed with cement solvent ) working pressure 4 kg/sq.cm. 75mm dia 82 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joint including cost of coupler as per Isi specification no. 49856/1998 excluding GST levied by GOI and GOM in all respect , including transportation ,freight charges , inspection charges loading, unloading , conveyance to the department stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement etc (self fit type to be jointed with cement solvent ) 75 mm Dia. 6 Kg/sq. cm 83 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joint including cost of coupler as per Isi specification no. 49856/1998 excluding GST levied by GOI and GOM in all respect , including transportation ,freight charges , inspection charges loading, unloading , conveyance to the department stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement etc (self fit type to be jointed with cement solvent ) 110 mm Dia. 6 Kg/sq. cm 84 Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joint including cost of coupler as per Isi specification no. 49856/1998 excluding GST levied by GOI and GOM in all respect , including transportation ,freight charges , inspection charges loading, unloading , conveyance to the department stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement etc (self fit type to be jointed with cement solvent ) 160 mm Dia. 6 Kg/sq. cm 85 Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. PWD SSR 2022-23 Sr. No.1461Page No. 353 86 Providing and fixing of CGWP / GRIHA approved Pure rain Filter 700 mm dia with 300 mm dia inlet and outlet to accumulate storm water having deselting suspended solid catch made out of FRP (Fibre Reinforced polymer) with stainless steel 304 grade strainers, having steel bucket of 600 micron capable of eliminating finer particulate matter upto 160 micron filtration made of stainless steel net with long fibre foam of 25 mm thickness, blue colour, filtration capacity 40-80 kilolitres (including 1 Nos. of Extension of 600 mm depth) (market Rate) 87 Lowering Laying and jointing with P.V.C. pipe and specialsof following class and Dia including conveyence from store to site of work. including cost of labour , material , except cement solvent , rubber ring as per IS code etc, completeworking pressure of75 mm Dia. 4 Kg/sq. cm 88 Lowering Laying and jointing with P.V.C. pipe and specialsof following class and Dia including conveyence from store to site of work. including cost of labour , material , except cement solvent , rubber ring as per IS code etc, completeworking pressure of 6 kg/sq.cm. 75 mm Dia. 6 Kg/sq. cm 89 15 mm dia service water Tapconnection for distributionnetwok of MDPE/UPVCpipe without Road Crossing as per MJP SSR 2023-24 Sec - H, Item no -17 Apage no. 65 90 15 mmdia service water Tapconnection for distributionnetwok of MDPE/UPVCpipe with Road Crossing asper MJP SSR 2023-24 Sec - H, Item no -17 Apage no. 65 91 Providing and Fixing Screw down required dia Wheel stop tap of brass including necessary socket , union nuts , testing etc complete (prior approval of sample and brand by Executive Engineerids necessary before use) type of 65 mm dia ( as per PWD SSR 2022-23 Item no 41.49 - BDV-9A page no 259) 92 Providing and Fixing Screw down required dia Wheel stop tap of brass including necessary socket , union nuts , testing etc complete (prior approval of sample and brand by Executive Engineerids necessary before use) type of 40 mm dia ( as per PWD SSR 2022-23 Item no 41.49 - BDV-9A page no 259) 93 Providing and Fixing Screw down required dia Wheel stop tap of brass including necessary socket , union nuts , testing etc complete (prior approval of sample and brand by Executive Engineerids necessary before use) type of 25 mm dia ( as per PWD SSR 2022-23 Item no 41.45 - BDV-9A page no 346) 94 Providing and Fixing Screw down required dia Wheel stop tap of brass including necessary socket , union nuts , testing etc complete (prior approval of sample and brand by Executive Engineerids necessary before use) type of 50 mm dia ( as per PWD SSR 2022-23 Item no 41.48 - BDV-9A page no 346) 95 Providing and Erecting C.I.D.F. Sluice Valve with joint to Pipe workwithout by pass arrangementPN 1.6 ,65mm dia 96 Providing and Erecting C.I.D.F. Sluice Valve with joint to Pipe work without by pass arrangementPN 1.6 ,80mm dia 97 Lowering laying and jointing in position followingC.I.D.F. Sluice Valve, reflux valve, i.e. All labour ,jointing material i.e. Nut bolts and giving satisfactory testing 65mm dia 98 Lowering laying and jointing in position followingC.I.D.F. Sluice Valve, reflux valve, i.e. All labour ,jointing material i.e. Nut bolts and giving satisfactory testing 80mm dia 99 Supplying and erecting Non Return Valve 25 mm Diameter in position made of Gun MetalAs per PWD ElectricalCSR 2022-23 specification No. CW-PLB/GP 16-6-21 page no 247 100 Supplying and erecting Non Return Valve 40 mm Diameter in position made of Gun MetalAs per PWD ElectricalCSR 2022-23 specification No. CW-PLB/GP 16-6-21 page no 247 101 Supplying and erecting Non Return Valve50 mm Diameter in position made of Gun MetalAs per PWD ElectricalCSR 2022-23 specification No. CW-PLB/GP 16-6-21 page no 247 102 Supplying and erecting Non Return Valve 65 mm Diameter in position made of Gun MetalAs per PWD ElectricalCSR 2022-23 specification No. CW-PLB/GP 16-6-21 page no 247 103 Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plasticbody. 104 Supplying & erecting water level controller 230/415 V.A.C, four wayfor under ground & overhead tank operation. PWD CSR (Ele 2022-23 Item no. 12-4-15 page no 105 Supplying & erecting mains with 2x1.5 sq.mm. and earth wire 1.5 sq.mmFR PVC copper wire, in rigid PVC conduit min.20mm dia, as per PWD CSR (Ele 2020-21 : WG-MA/PC,Item No 1-6-1 page no 08 106 Hydraulic testing of PVC pipeline to specified pressure including cost to fall materials and labour and water for testing for specified length including cutting, placing end cap making arrangementfor filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost to for testing, if necessary and reinstating to original position. 75mm Dia PVC 6 kg/cm^2 107 Commissioning running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valve man etc as per requirement of the scheme and who should also administer chemical dose for a period of 1 year for individual scheme and 1 years for regional scheme, together with training of persons spared by MJP/ local body and handing over the scheme to local body after completion of the above period as directed by engineer in chargeetc. complete. 108 installation commissioning and trialrun of min 3 monthafter successfull installationofSolar Energy Based R.O. plus UVof 25 Lph Capacity warrantee of 1 Year From date of Successful commissioning , 109 installation commissioning and trialrun of min 3 monthafter successfull installationof Solar Energy Based R.O. plus UVof 50 Lph Capacity warrantee of 1 Year From date of Supply, 110 installation commissioning and trialrun of min 3 monthafter successfull installationofSolar Energy Based R.O. plus UVof 100 Lph Capacity warrantee of 1 Year From date of Successful commissioning , 111 installation commissioning and trialrun of min 3 monthafter successfull installationof Solar Energy Based R.O. plus UVof 250 Lph Capacity warrantee of 1 Year From date of Successful commissioning , 112 installation commissioning and trialrun of min 3 monthafter successfull installationofSolar Energy Based R.O. plus UVof 500 Lph Capacity warrantee of 1 Year From date of Successful commissioning , 113 installation commissioning and trialrun of min 3 monthafter successfull installationof Solar Energy Based R.O. plus UVof 1000 Lph Capacity warrantee of 1 Year From date of Successful commissioning , 114 Land Development and site preparation .Excavator (JCB JS 80) MJP SST 2023-24 page no 15 sr no 13 115 Dismantleexisting Structure and removal existing water storage tank of 5000 lit capacity and again placed tank on G.I. Structure after installation ,including labour ,machinary and required tool 116 Providing and constructing two taps standpost as per type design with excavation 15 cm thick PCC 1:3:6 bedding 20 mm thick PCC 1:2:4 concrete for platform of 1.75 M dia. with side curb and bucket rest, 80 mm dia, heavy duty GI pipe central post duly filled therein with C.C. 1:2:4, 5 M long, 20 mm dia. medium G.I. pipe from point of tapping to standpost, additional 20 mm dia G.I. pipe fixed vertically upto 15 mm dia self closing water taps, one brass ferrule, etc. complete together with all labour and material charges as per drawing and as directed by Engineer-in charge when good foundation is available. Rate includes draining arrangement by excavating open gutters as per MJP SSR 2023-24 item no. 12 page No. 60 117 RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge as per Pwd SSR2022-23 Item no. 48.46 Page nos 302 118 supplying , installing ,testing and commissioning of Solar LED mini high mast20 w x 5 nos . LED lumanaries , 2 nosx 150 AH 12 V lithium battery, min. 400 wpSPV modules mounted on GI Octagonal pole with bottom of 130 mm A/F top 70mm A/F 6 mtr height along with bracket , foundation earthing and necessaries accessories , water proof battery box, suitable solar inverter , timer setting arrangement, GI / powder coated module structure , with first 6 hrs Full intensity light output and following 6 hrs with half intensity light output along with solar and local electrical power supplyarrangement,wave solar powersupply charging fascility complete. with 5 year Warrantee (1. solar comprising mono crystalline photovoltaic cell of the same capacity.2. inclusive of total system commissing, istalling ,tramsportation , insurance with 5 years of AMC/ CMC specification nos.as per PWDelectrical Mech CSR2022-23 item no 4-3-14 119 Supplying, installing, testing and commissioning solar streetlight pole comprising of 9 W LED fitting, 12V 18Ahmaintenance free lithium battery, min. 40 Wp SPV module, MSpowder coated battery box weather proof, mounted on 75/80mm dia. B-Grade GI pole of 6 m. height along with brackets,foundation, earthling and necessary accessories complete.Specification no. ESD-SOL-STL ( with 5 years warrantee ) 120 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/20245.0Hp to 7.50 HP 121 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/20247.5 Hp to 10.0 HP 122 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/2024Above 10 hp to 15 HP 123 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/2024Above 15 HP to 20 HP 124 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/2024Above 20 hp To 25 HP 125 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/2024Above 25 hp To 35 HP 126 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/2024Above 35 hp To 50 HP 127 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/2024Above 50 hp To 75 HP 128 Design Supplying, installing, testing and commissioning of Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/2024Above 75 hp To 100 HP 129 Design Supplying, installing, testing and commissioning ofI.O.T. / commanderas per Specification Compatiblt toIten coDe no 120 to 128 130 Supplyand commissioning of I.O.T.based water level controller and monitor with 5 years CMC Hybrid Controllerfor 3 to 100Hp solar Pumping System Compatible to cloudbase (RMS) Dashboard reporting/monitoring and Management monitoring system withFIve Years C.M.C.asper GSDA Circular Dtd. 11/09/2024Above 25 hp To 35 HP 131 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/20245 kw to 7.5 kW 132 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/2024Above 7. 5 kw to 10 kW 133 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/2024 Above 10 kw to 15 kW 134 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/2024Above 15 kw to 20 kW 135 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/2024Above 20 kw to 25 kW 136 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/2024Above 25 kw to 35kW 137 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/2024Above 35 kw to 50.00 kW 138 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/2024Above 50.00 kw to 75 kW 139 Supply and commissioning of GRID tied InverterSuitable For 5 to 100 Kw ON grid Solar System with 5 year Warrantee asper GSDA Circular Dtd. 11/09/2024Above 75 kw to 100 kW 140 For ABoveSubmersible Pump 30.HP Providing, erecting and giving test of 150 mm dia. submersible pump sets confirming to IS 8034 and motor confirming IS 9283. Pump shall be suitable for variousdelivery head and discharge with stainless steel pump shaft and Motor suitable for working on 415 V± 10%, 3Ph, 50 Hz., A.C. supply, Cable guard, thrust carbon/fibre bearing to accept entire hydraulic thrust, water proofwinding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable suction stainer shall also be provided. 3 core, single/double run copper conductor submersible type flat cable 3 Mtr. and 3 pairs of erection clamps. Rates per pump upto 8 stages (as per design)FOR 35HP 141 FOR 35HP supply rate should be increased per stagefor pump with more than 8 Stage 142 For ABoveSubmersible Pump 30.HP Providing, erecting and giving test of 150 mm dia. submersible pump sets confirming to IS 8034 and motor confirming IS 9283. Pump shall be suitable for variousdelivery head and discharge with stainless steel pump shaft and Motor suitable for working on 415 V± 10%, 3Ph, 50 Hz., A.C. supply, Cable guard, thrust carbon/fibre bearing to accept entire hydraulic thrust, water proofwinding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable suction stainer shall also be provided. 3 core, single/double run copper conductor submersible type flat cable 3 Mtr. and 3 pairs of erection clamps. Rates per pump upto 8 stages (as per design)FOR 40 HP 143 FOR 40HP supply rate should be increased per stagefor pump with more than 8 Stage 144 For ABoveSubmersible Pump 30.HP Providing, erecting and giving test of 150 mm dia. submersible pump sets confirming to IS 8034 and motor confirming IS 9283. Pump shall be suitable for variousdelivery head and discharge with stainless steel pump shaft and Motor suitable for working on 415 V± 10%, 3Ph, 50 Hz., A.C. supply, Cable guard, thrust carbon/fibre bearing to accept entire hydraulic thrust, water proofwinding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable suction stainer shall also be provided. 3 core, single/double run copper conductor submersible type flat cable 3 Mtr. and 3 pairs of erection clamps. Rates per pump upto 8 stages (as per design)FOR 45 HP 145 FOR 45HP supply rate should be increased per stagefor pump with more than 8 Stage 146 For ABoveSubmersible Pump 30.HP Providing, erecting and giving test of 150 mm dia. submersible pump sets confirming to IS 8034 and motor confirming IS 9283. Pump shall be suitable for variousdelivery head and discharge with stainless steel pump shaft and Motor suitable for working on 415 V± 10%, 3Ph, 50 Hz., A.C. supply, Cable guard, thrust carbon/fibre bearing to accept entire hydraulic thrust, water proofwinding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable suction stainer shall also be provided. 3 core, single/double run copper conductor submersible type flat cable 3 Mtr. and 3 pairs of erection clamps. Rates per pump upto 8 stages (as per design)FOR 50 HP 147 FOR 50HP supply rate should be increased per stagefor pump with more than 8 Stage 148 For ABoveSubmersible Pump 30.HP Providing, erecting and giving test of 150 mm dia. submersible pump sets confirming to IS 8034 and motor confirming IS 9283. Pump shall be suitable for variousdelivery head and discharge with stainless steel pump shaft and Motor suitable for working on 415 V± 10%, 3Ph, 50 Hz., A.C. supply, Cable guard, thrust carbon/fibre bearing to accept entire hydraulic thrust, water proofwinding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable suction stainer shall also be provided. 3 core, single/double run copper conductor submersible type flat cable 3 Mtr. and 3 pairs of erection clamps. Rates per pump upto 8 stages (as per design)FOR 75 HP 149 FOR 755HP supply rate should be increased per stagefor pump with more than 8 Stage 150 Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages1.50 HP 151 Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages2.0 HP 152 Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages3.0 HP 153 Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages4.0 HP 154 Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages5.0 HP 155 Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages6.0 HP 156 Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages7.5HP 157 FOR 1.5 HP to 7.50 HP Submersible Pump 150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8 stages7.5HP Supply rate should be increased per stage for pump with more than 8 stages 158 For Below Submersible Pump 30.HP Providing, erecting and giving test of Submersible Pump 250 mm dia (with Bronze / Stainless steel(CF8M) Impeller) up to 8 stagesof category A & BRates per pump upto 8 stages (as per design)FOR 15 HP 159 For Below Submersible Pump 30.HP Providing, erecting and giving test of Submersible Pump 250 mm dia (with Bronze / Stainless steel(CF8M) Impeller) up to 8 stagesof category A & BRates per pump upto 8 stages (as per design)FOR 22.50 HP 160 For Below Submersible Pump 30.HP Providing, erecting and giving test of Submersible Pump 250 mm dia (with Bronze / Stainless steel(CF8M) Impeller) up to 8 stagesof category A & BRates per pump upto 8 stages (as per design)FOR 25 HP 161 For Below Submersible Pump 30.HP Providing, erecting and giving test of Submersible Pump 250 mm dia (with Bronze / Stainless steel(CF8M) Impeller) up to 8 stagesof category A & BRates per pump upto 8 stages (as per design)FOR 30 HP 162 For Submersible Pump 5 to 12.50 HPSubmersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 5 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 7.5 HP 163 For Submersible Pump 5 to 12.50 HPSubmersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 5 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 10 HP 164 For Submersible Pump 5 to 12.50 HPSubmersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 5 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 12.5 HP 165 For Submersible Pump 5 to 12.50 HP Submersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 5stagesof category A & B PMRates per pump upto 8 stages (as per design) FOR Supply rate should be increased per stage for pump with more than 5 166 For Submersible Pump 15 to 27.50 HPSubmersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 8 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 15 HP 167 For Below Submersible Pump 30.HP P Submersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 8 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 17.5 HP 168 For Submersible Pump 15 to 27.50 HPSubmersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 8 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 20 HP 169 For Submersible Pump 15 to 27.50 HPSubmersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 8 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 22.50HP 170 For Submersible Pump 15 to 27.50 HP Submersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 8 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 25 HP 171 For Submersible Pump 15 to 27.50 HPP Submersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 8 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR 27.50 HP 172 For Submersible Pump 15 to 27.50 HPSubmersible Pump 200 mm dia (with Bronze /Stainless steel (CF8M) Impeller) up to 8 stagesof category A & B PMRates per pump upto 8 stages (as per design)FOR Supply rate should be increased per stage for pump with more than 8 stages 173 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV 174 Supplyingand erecting iron work, sheet metal work consisting of sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other erectedpurposewith bending, cutting, drilling and welding completewith at the position with necessary materials duly painted one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. PWD CSR -6-1-19 175 Providng cm complete earthing with galvanized iron earth plate size 60 x 60 x as per specification with all materials, testing & recording the results PWDELE SSR 22-23 item 9-1-1 176 Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. EA-EP PWDELE SSR 22-23 item 9-1-2 177 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP PWDELE SSR 22-23 item 9-1-3 178 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EPPWDELE SSR 22-23 item 9-1-4 179 Supplying and erecting GI strip of required size used for earthing on wall wall and/or any other purpose with necessary GI clamps fixed required joints painted with insulating and non-corrosive bond with As per specification no. EA-EP. 180 Supplying, installing, testing and commissioning of Solar Panel high efficiency poly-crystaline 12V with necessary photovoltac cell 160Wp, complete clamps and module frame on existing structure (mm) =Module Volt (V)=12 No. of cells in serious = 36 cell size min = (1012156.75 x 982 cell size to clerance 1% Module size (L x W x H) m)=160 Vpm(V)=18.88 x 35) Voc (V) = 23.15 Isc (A) = 8.38 Pmax (W temperaturelpm (A) - 847. Voltage (beta) C = 0.28%, coefficient of power (gamma) C= 0.38%, Nominal range operatingfromcell temperature - 45°C 12°C operating temperature 40°C to 85°C Junction box connector IP 68 Waterproof warrantee).PPO and MC4 Compation Module Weight (Kg) 11.20 (5 years (Ref. estimate: 243/EE/YTL/2023-24) 181 Supplying, installing, testing and commissioning of Solar Panel high efficiency poly-crystaline 12V with necessary photovoltac cell 335 Wp, complete clamps and module frame on existing structure (mm) =Module Volt (V)=12 No. of cells in serious = 36 cell size min = (1012156.75 x 982 cell size to clerance 1% Module size (L x W x H) m)=160 Vpm(V)=18.88 x 35) Voc (V) = 23.15 Isc (A) = 8.38 Pmax (W temperaturelpm (A) - 847. Voltage (beta) C = 0.28%, coefficient of power (gamma) C= 0.38%, Nominal range operatingfromcell temperature - 45°C 12°C operating temperature 40°C to 85°C Junction box connector IP 68 Waterproof warrantee).PPO and MC4 Compation Module Weight (Kg) 11.20 (5 years (Ref. estimate: 243/EE/YTL/2023-24) 182 Supplying, installing, testing and commissioning of Solar Panel high efficiency poly-crystaline 12V with necessary photovoltac cell 545 Wp, complete clamps and module frame on existing structure (mm) =Module Volt (V)=12 No. of cells in serious = 36 cell size min = (1012156.75 x 982 cell size to clerance 1% Module size (L x W x H) m)=160 Vpm(V)=18.88 x 35) Voc (V) = 23.15 Isc (A) = 8.38 Pmax (W temperaturelpm (A) - 847. Voltage (beta) C = 0.28%, coefficient of power (gamma) C= 0.38%, Nominal range operatingfromcell temperature - 45°C 12°C operating temperature 40°C to 85°C Junction box connector IP 68 Waterproof warrantee).PPO and MC4 Compation Module Weight (Kg) 11.20 (5 years (Ref. estimate: 243/EE/YTL/2023-24) 183 Supplying, and erecting DC LED flood light fitting of 12V 50W, with outputlens angle and of 60 degrees including first 7 hr. full intensity light<3750 colour followingtemperature6 hr with half intensity light output, with lumen 70. PWM charge5500K- 6500K, colour rederting index >efficiency>90%. controller efficiency>90%, LED driver LED externalDuty cycle first six hours 100%, Rest 50% light, charge controller optics 145x90 degree flood light lens class IP 66,monitoring algorithm methodology three stage battery charge circuit protect Maximum charging current 10 Amps, short discharge protection,ion, battery over charge protections battery deep NTTV-4V, solar 6 22.00 panel dusk to dawn operation battery fullDTTV-6V, battery low load disconnect voltage1 1.2V set point 14.7V, load disconnect voltage 13V, battery constant voltage LED indication-green low green on: battery off: Battery not charging PV charging,green flashing: battery full, Red off. battery not discharge, Red on: Battery discharge, load disconnect. With Li-fePo4 battery with capacity of 128V-162 Ah suitable for backup for 3 days with 15A BMS, CCII having duty cycle < 3000 suitable to charge lithium cell with necessary wiring connections, with IP 65 aluminium cabinetwith stand and nut bolts complete. (Nominal Voltage - 12V Nominal Capacity 162 Ah, Stored Energy - 1.8Kw, Cycle@ 0.5c.80%DoD<3000, Charge Voltage 13.2, charge mode-CCTV.Standard .01, 1.00 charge current-20amp, rapid charge current37.5. standard discharge current 15, max charge current -75 amp,low voltage cutoff 11.2, casing material- Aluminium, Terminal- MC4 connector, charge temp range-0-45C, Discharge temperature range - 20-55C, Storage temp-20-45C, Weight - 17 KG. and above light and battery make as per approved make in tender specification housing of Pressure die cast aluminium alloy and heatsink extruded aluminium complete. (5 Yrs Warrantee) 184 Making M-20 grade reinforced cement concrete foundation byconsidering the safe soil bearing capacity at site as 10 T/sq.m. at 1.5 m depth including supply of steel, concrete, exacavation and fixing provided nut bolts with the help of template,duly plastered asper design complete(for 9m &10 m high octagonal/conical Glpole)(CSR NO16.3.10) 185 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).16-3-9 186 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete ( for 11m & 12.5m high octagonal /conical GI pole). CSR 16-3-11 187 Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast). 188 Supply and erecting 9m (clear height) Fixed type high-mast (Top100mm, Bottom- 250mm) hot dipped galvanized 880 to 120 micron in single piece suitable for square/ hexagonal /round bracket and foundation bolts suitable for max 6 nos floodlight fixtures on provided foundation NON DSR Item 189 Supply and erecting 9m (clear height) Fixed type high-mast (Top-100mm, Bottom- 200mm) with hexagonal /round bracket and foundation bolts suitable for max. 4 nos. flood light fixtures on provided foundation as per specification no. OH-PL/OPL (excluding luminaires).CSR 22-23 item8-2-8 190 Providing & erecting 3 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 191 Providing & erecting 4 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 192 Providing & erecting 5 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL. 193 Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 194 Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 195 Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on provided foundation as per specification no. OH-PL/OPL 196 Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 200 mm A/F, top 100 mm A/F on provided foundation as per specification no. OH-PL/OPL 197 Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipeerected on provided foundation complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Maharashtra View Result →
34.
Public Administrative Department #9365571 Technical Bid
Tender For Rate Of ARCHITECTURAL LIGHTING For Non SSR Rate For M C Parli V , Supplying And Erecting Integrated Led Posttop Light Fitting Min 40-45 Watt, The Lights Shall Be Die Cast Aluminum Housing With Spun Aluminum Top Cover Graphite Grey (Ral 7024), Along Decorative Crown Made Of Aluminum With Broom Golden Yellow (Ral 1032) ?Nished. The Luminiares Shall Come With Anti Corrosive Epoxy Polyester Powder Coated Graphite Grey / Black Finish, Uv Stabilized Clear Pc Diffuser Concealed With Ss Hardwares, Special Designed Die Cast Knob & 3Mm Thickness Ms Pole Mounting Bracket, The Lights Shall Be Highly Efficient Lm 80 Certified Smd Leds (> 150Lm/W) Mounted On Mcpcb, Pre-Wired With Constant Current Integrated Led Driver, Built In Surge 4Kv, The Fitting Shall Be Equiped With Additional Surge Protection Device 10Kv, Wide Operating Voltage Range 140 - 270V~, 50Hz, Driver Efficiency > 85% , Full Load Thdi < 10%, Working Ambient Temperature -10°C ~ + 50°C, Average Light Source Life (L70b50) 50,000Hrs, Instant Start Flicker Free Operation, Environment Friendly, Without Mercury, No Harmful Uv & Ir Radiation, Impact Resistance Ik08, Electrical Class 1 Impact Resistance Ik08, Cri = 70, Power Factory = 0.95, Color Temprature 3000K /4000K/6500K. Lumen Maintenance Data Shall Be Led Testing Per Iesna Lm-80-08 And Projected Per Iesna Tm-21-11 Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Integrated Led Posttop Light Fitting Min 90-100 Watt, The Lights Shall Be Die Cast Aluminum Housing With Spun Aluminum Top Cover Graphite Grey (Ral 7024), Along Decorative Crown Made Of Aluminum With Broom Golden Yellow (Ral 1032) ?Nished. The Luminiares Shall Come With Anti Corrosive Epoxy Polyester Powder Coated Graphite Grey / Black Finish, Uv Stabilized Clear Pc Diffuser Concealed With Ss Hardwares, Special Designed Die Cast Knob & 3Mm Thickness Ms Pole Mounting Bracket, The Lights Shall Be Highly Efficient Lm 80 Certified Smd Leds (> 150Lm/W) Mounted On Mcpcb, Pre-Wired With Constant Current Integrated Led Driver, Built In Surge 4Kv, The Fitting Shall Be Equiped With Additional Surge Protection Device 10Kv, Wide Operating Voltage Range 140 - 270V~, 50Hz, Driver Efficiency > 85% , Full Load Thdi < 10%, Working Ambient Temperature -10°C ~ + 50°C, Average Light Source Life (L70b50) 50,000Hrs, Instant Start Flicker Free Operation, Environment Friendly, Without Mercury, No Harmful Uv & Ir Radiation, Impact Resistance Ik08, Electrical Class 1 Impact Resistance Ik08, Cri = 70, Power Factory = 0.95, Color Temprature 3000K /4000K/6500K. Lumen Maintenance Data Shall Be Led Testing Per Iesna Lm-80-08 And Projected Per Iesna Tm-21-11 Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Wall / Floor Mounted Flush Type Light Fitting Min 3-5 Watt, The Housing Of Flush Type Light Shall Be Stainless Steel Aisi 316L, Diffuser: Toughened Glass Leds : Power Leds With High Efficacy (>120Lm/W), 3000, With Luminous Flux Maintenance Of 70% (L70 B20) At 50,000 Hrs. Mounting: Recessed Driver : Integral With Safety Diode To Protect The Led Module Against Voltage Peaks Up To 2Kv. P.F. > 0.5 Optics: Optics: 12Degree / 25 Degree Symetricsymmetric / 120° Wide /Diffused, Ambient Temperature Zone : -30 °C To +50°C Input Voltage Range : 100V – 280V Ac, 50-60 Hz. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erectingfloor Mounted Flush Type Lights 35-40 Watt Lights, Input Ac Voltage Shall Be 140V To 270V. Frequency 50/60Hz, Lumen Efficiency 60 To 100Lm/Watt, Cct(K), 3000K/ 4000K/ 5700K/ Single Color (R/ G/ B/ A)/ Rgbw, Optics Shall Be Symmetric: 10 °/ 15 °/ 30 °/ 40 °/ 60 ° Asymmetrical- Forward Asymmetric. The Luminaires Shall Be High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating, Recess Case Material- Abs/ Nylon, Frame Material- Ss316 And 8Mm Thick Extra Clear Toughened Glass With Silicon Moulded Gaskets For Ip67 Rating The Outer Housing Shall Be Stainless Steel - Aisi 304 Grade Hardware, Brass Pg7 Cable Gland For Thermal Management. The Lum Shall Be Having Integral / Non Integral Driver. The Lum Shall Have Osram/ Cree/ Seoul/ Bridgelux 3535 Discrete Smd Leds, With Complete Lm80 Certified Chip. The Lum Shall Have Low Junction Thermal Resistance For Long Life And Low Lumen Depreciation, Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20), The Lum Shall Have Outdoor Rated >85% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 15% & Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C, • Structured On High Performance Optical Grade Lenses In Pmma / Pc The Lum Shal Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015 Ip67, Ik10 As Per Iec-En 62262.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erectingfloor Mounted Flush Type Lights 18-24 Watt Lights, Input Ac Voltage Shall Be 140V To 270V. Frequency 50/60Hz, Lumen Efficiency 60 To 100Lm/Watt, Cct(K), 3000K/ 4000K/ 5700K/ Single Color (R/ G/ B/ A)/ Rgbw, Optics Shall Be Symmetric: 10 °/ 15 °/ 30 °/ 40 °/ 60 ° Asymmetrical- Forward Asymmetric. The Luminaires Shall Be High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating, Recess Case Material- Abs/ Nylon, Frame Material- Ss316 And 8Mm Thick Extra Clear Toughened Glass With Silicon Moulded Gaskets For Ip67 Rating The Outer Housing Shall Be Stainless Steel - Aisi 304 Grade Hardware, Brass Pg7 Cable Gland For Thermal Management. The Lum Shall Be Having Integral / Non Integral Driver. The Lum Shall Have Osram/ Cree/ Seoul/ Bridgelux 3535 Discrete Smd Leds, With Complete Lm80 Certified Chip. The Lum Shall Have Low Junction Thermal Resistance For Long Life And Low Lumen Depreciation, Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20), The Lum Shall Have Outdoor Rated >85% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 15% & Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C, • Structured On High Performance Optical Grade Lenses In Pmma / Pc The Lum Shal Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015 Ip67, Ik10 As Per Iec-En 62262.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erectingfloor Mounted Flush Type Lights 6-7 Watt Lights, Input Ac Voltage Shall Be 140V To 270V. Frequency 50/60Hz, Lumen Efficiency 60 To 100Lm/Watt, Cct(K), 3000K/ 4000K/ 5700K/ Single Color (R/ G/ B/ A)/ Rgbw, Optics Shall Be 12Deg / 25 Deg Symetric. The Luminaires Shall Be High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating, Recess Case Material- Abs/ Nylon, Frame Material- Ss316 And 8Mm Thick Extra Clear Toughened Glass With Silicon Moulded Gaskets For Ip67 Rating The Outer Housing Shall Be Stainless Steel - Aisi 304 Grade Hardware, Brass Pg7 Cable Gland For Thermal Management. The Lum Shall Be Having Integral / Non Integral Driver. The Lum Shall Have Osram/ Cree/ Seoul/ Bridgelux 3535 Discrete Smd Leds, With Complete Lm80 Certified Chip. The Lum Shall Have Low Junction Thermal Resistance For Long Life And Low Lumen Depreciation, Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20), The Lum Shall Have Outdoor Rated >85% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 15% & Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C, • Structured On High Performance Optical Grade Lenses In Pmma / Pc The Lum Shal Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015 Ip67, Ik10 As Per Iec-En 62262.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 15-22 Watt 300Mmlinear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumendepreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700K Optics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 900Mm-1220Mm X 108Mm X 60Mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 36-45 Watt Min 1000Mm Linear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumendepreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700Koptics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 900Mm-1220Mm X 108Mm X 60Mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 18-25 Watt 600Mm Linear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumen Depreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700Koptics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 320X60x108mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Flood 75 Watt Flood Light.The Housing Shall Be Of High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating With Multiple Color Options, Robust, Sleek Design With Excellent Heat Dissipation With 360° Cradle Movement For Omnidirectional Precise Focusing The Housing Shall Be With 4Mm Thick Extra Clear Toughened Glass With Silicon Moulded & Extruded Gaskets For Ip66 Rating. The Hosing Shall Come With Separate Integral Driver Compartment Ip 66. Hosing Shall Be Made Of Stainless Steel - Aisi 304 Grade Hardware With Minimised Windage Area (0.0676M²) The Housing Designed With Thermal Managment Of Radiator Fins In Vertical Direction To Ensure Proper Air Convection. Their Shall Be Separate Integral Driver Compartment For Thermal Isolation & Not To Affect Led Compartment During Maintenance, Provided With Brass Pg9 Cable Gland. The Luminiar Shall Be As Per Is 10322 (Part5/ Sec.5) & Ip66, Ik08 As Per Iec-En 62262 With Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Leds Shall Be High Efficacy (>145Lm/W) Outdoor Illumination Grade Smd Leds, Luminous Flux Maintenance 80%, 50,000 Hrs (L80b20), High Color Rendering :Cri-70, Thevarious Cct 4000K/3000K. The Lum Shall Be Outdoor Rated >90% Efficiency Constant Current Drivers With Over Voltage (440V Ac)/Undervoltage, Short Circuit & Open Circuit Protection 4Kv / 5Kv / 6Kv Inbuilt Surge Protection With Optional 10Kv / 20 Kv External Spd And Low Current Harmonics : Thd < 10%. The Lum Shall Be Low Flicker :<3% With Ambient Temperature Range : -30°C To 45°C. The Lum Shall Come With High Performance Optical Grade Lenses In Pmma / Pc And All Photometric Design Data For All Optics Available. The Frequency Of Lum Shall Be In Range Of 50 / 60 Hz With Luminous Efficacy Up To 120 Lumens /Watt. The Lum Shall Come With Cct (K) Option Of 3000K / 4000K / Rgb / Rgbw /Single Colour. The Lum Shall Have Optics In Degree : Symmetric : 10° /25° /35° /50° /60° /90° Asymmetric : 20°X 90° Elliptical / Fn - Forward Asymmetric 45Deg.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting 15W/Mtr Ip67 Mono Flexible Strip Along With All Accessories. The Plane Profile Allows Installation And Application In Surface Mount Or Flush Mount. Uniform, Dot-Free And Smooth Lighting Performance Up To 5M[16.4Ft.],Compared With Traditional Fragile Glass And Harden/Yellowing Easily Pvc, Sheathing Material, Silicon Extrusion Technology Is An Advanced Process With High-Efficiency Production Capacity And Environmentally-Friendly Characteristics. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture.Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Constant Voltage Output- 24Vdc, Current O/P- 6.3A Max, High Power Factor >0.97(240Vac& Full Load),100-200Watt Thd<10%, Surge Immunity: Dm 6Kv, Cm 10Kv, Ip67. Approved Make Shall Be Philips, Moso, Invetronics, Bag, Or As Per Suitable Strip Light Manufacturer. , Supply & Installation Of Integrated Solar Poles With Decorative Post Top Type Led Luminiares Lights With Spun Almunium Housing Materials. Solar Poles Shall Be Included With Decorative Led Lights With 24 Watt (-/+5%) With Lumen Output Ofnot Less Then 2200 Lumens. The Led Light Shall Comes With Options Of Color Temperaturein Range Of 3000K / 4000K / 6500K. The Panel On The Pole Shall Be Made Of Solar Module High Efficiency Mono Crystallinewith Min 200W. The Complete Solar Module Efficiency >18%, Voc Of Solar Module Battery 17 V. Battery Used In The Pole Must Be Lithium Ferro Phosphate Battery 12.8 V 60Ah With Bis Approved Cell. The Poles Shall Come With 24 Hours With Dimming Back Up. Solar Charge Controller Type And Capacity Shall Be Mppt & 12.8 V 10 Amp. The Complete System Shall Support Dusk To Dawn Operation To Save Battery Life And Increase The Life Of System. The Poles Must Comes With Inbuilt Over-Charge Protection, Deep-Discharge Protection, Over-Current Protection, Short-Circuit Protection, Over- Voltage Protection. The Led Lumiare Shall Be Ip65 And & Ik 07 Rating. Height Of The Pole Shall Be 04 Meter Including Brackets. Column Cross-Section Shall Not Be More Then 158X158 Mm. Max Weight Of The Poles Shall Not Be More Then 75 Kg (±10%) And Shall Come With Powder Coated Paint. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Urbanspark, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of 10Watt Led Bollard With Extrused Aluminum And Die Cast Aluminum Housing With Uv Stabilized Translucent Pc Diffuser. The Bollard Shall Be Glare Controlled ?Tment For Smooth Illumination And Anti-Corrosive Epoxy Polyester Powder Coating ?Nish. The Bollard Shall Be Moulded Silicon Gaskets & Stainless Steel Fasteners And Must Have Energy Saving Upto 50% Compared To Conventional Luminaires. The Lum Shall Be Pre-Wired Built-In Constant Current Class 1 Led Driver And Eco-Friendly Without Any Harmful Uv & Ir Radiation. The Bollard Shall Be Of Graphite Da Grey (Ral 7024)With Impact Resistance Of Ik08 And Ingress Resistance Of Ip65. The Lum Shall Be Of Cri >70, With Lm80 Led Chip With Beam Angle Of 360 Degree. The Voltage Range Shall Be 140-270Vac. With System Lumens 850Lm. Driver Efficacy > 85%, Power Factor > 0.95 @ Fullload & Rated Voltage, Thd Shall Be < 10% @ Fullload & Rated Voltage With In Built Surge Protector 4Kv (Built-In), The Bollard Shall Have Avg Life Of 50000 Hrs (L70b50). Electrical Safety Classs I, Working Ambient Temp -10°C ~ + 50°C. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approvedmake Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supply Of 3100Mm Kedareshwar Frp Single / Double Arm Poles Made Of Marine Grade Composites (Marine Grade Corrosion Resistant & Hydrocarbon Solvent Resistant). The Inner Column Frame Made Of 60 Mm Od Mild Steel Pipe As Per Is: 1161 Or Is: 1239 Hot Dip Galvanized 65 Microns, Post Fabrication. The Gap Between Ms Pipe & The Frp Camouflaged Shall Be Filled With Pu Foam For Better Stability. The Pufoamis A Formulated, Cfc & Hcfc Free Polyether Polyol Blended With Zero Odp Blowing Agent Forexcelentflow Ability, Even Density Distribution, Good Dimensional Stability & Low Thermal Conductivity Properties. The Pu Foam Should Have 340 Mg Koh/Gm Oh Values, Viscocity@ 25°C Of 500 +/-50 Cps., Specific Gravity Of 1.0 To 1.15. Sections Is The Hdg Pipes & Cladded With Glass Reinforced Polymer Using Unsaturatedpolysterresin Along With 300 & 450 Gsm Emulsion Chopped Strand Mat Comprising Viscocity@ 25°C Should Be 300 To 400 Cps With Acid Value Of 25 Mg Koh/G. Volatile Content Of 35%. Specific Gravity 1.12 @25°C. Barcolhardness Of 40-42, Heat Deflection Temperature Of 60-63°C, Tensile Strength 525 Kg/Sqcm, Tensile Modulus Of 3000, Flexural Strength Of 1000 Kg/Sqcm, Flexural Modules Of 3200 Mpaformulated To Meet Speccphysical Requirements: Weatherability, Heat Resistance, Chemical Resistance, And Electrical Properties. The Glass Fibrescomplies With Din En-2.2 & Din En 10204-3.1. The Camouflaged Frp Grooved Column Is 90Mm Od. The Bracket Arm Is Hdg Post Fabrication, Further Fibrecoated & Given A Pu Paint Treatment For A Classic Surface Finish. All Hardware Is Of Stainless Steel. The Product Is An All Weather Proof & Maintenance Free. Its Self Colouredtextured Surface Finish With Scratch Resistant, Aliphatic Grade Uv. Stabilized Pu Paint With Uv Stable Polyurethane 120 S+/-5 Viscosity Aliphatic Paint, With Minimum Standing Life Of 05 Years. These Lamp Posts Are Individually Hand Crafted To Replicate Steel And Cast Iron. The Base Bollard Of The Lamp Posts Consist Of Access Door For Integral Fitment Of Electrical Accessories. The Base Pcd Is 250Mm With Adjustable Pattisof 50X6mm, Anchor Bolts Of Size M12x120mm, 4 Nos. The Base & Foundations Bolts Are Camouflaged With A Designer Detachablefrp Covering/Ring To Give It Appeasing Appearance. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only. , Supply Of Decorative Pole Of 7Mtr Height Trishul Single/Double Arm Pole Made Of Gi Sections Of 114.3 X 3.5 X 4000Mm And 89Mm X 3 X 3000Mm. Base Casting Of 700Mm Height With Base Plate Section Of 380Mm Dia. The Base Plate Shall Be Of 12Mm Thick And Shall Gradually Move Up To 120Mm Height And Shall Have 300Mm Dia That Shall Again Taper In To 100 Height With 2 Ring Design Of 15Mm Thick And 200Mm Dia. It Shall Again Taper Out With A Curve Unto 430Mm Height With 230Mm Dia And Top 143Mm Dia. The 430Mm Height Section Shall Have A Door Of Size 160Mm On Bottom And 100 On Top With An Height Of 235Mm. The Door Shall Have A Floral Design To Give And Aesthetic Look. Bracket Provided With Reducer/Expander For Holding The Single/Double Arm Bracket Length 1000Mm On Each Side. The Bracket Shall Have Fretwork Pattern Design On The Bracket Arm. 750Mm Which Shall Be In Position Perpendicular To Ground. Bracket Stem Shall Be Crowned At Top With A Frp Trishul Design Of 500Mm Height. The Bracket Shall Be With Provision For Placing Suspended Type Led Fixture Lights On Top. Pole Shall Have Aluminum Casting Ring Embellishments In Between The Pole Shaft. The Base Casting Shall Have Provision For Inbuilt Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom. Mounting Steel Plate Have Hole Suitable For Foundation Bolts Of Size M16 X 600Mm. Gi Pole Shall Be Painted In 3 Coat Process (>50 Micron) 1St Coat With Etch Primer, 2Nd Coat With Epoxy Zinc Primer & 3Rd Final Coat With Pu Paint. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only. , Supplying And Erecting Of Wall / Floor Mounted Type 15-22 Watt 300Mmlinear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation.The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumendepreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : Dmx Rgbw / Single Colour R/G/B/A Optics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 900Mm-1220Mm X 108Mm X 60Mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 36-45 Watt Min 1000Mm Linear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumendepreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700Koptics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 900Mm-1220Mm X 108Mm X 60Mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Wall / Floor Mounted Type 18-25 Watt 600Mm Linear Lights. The Housing Of Lum Shall Be Of Extruded Aluminium Housing With Pressure Die Cast Aluminium End Caps And Shall Be Polyester Powder Coating Matt Black / Natural Oxidized Aluminium Anodised. Other Ral Shades Available On Request, Robust, Sleek Design With Excellent Heat Dissipation, Adjustable Ss 316 Brackets For Mounting And Orientation. The Lum Shall Be Having 4Mm Thick Extra Clear Screen Printed Toughened Glass With Silicon Moulded Gaskets For Ip66 Rating. The Lum Shall Be Ofstainless Steel - Aisi 304 Grade Hardware With Brass Pg7 Cable Gland, Radiator Fins Along The Extrusion Length For Improved Heat Dissipation. The Lum Shall Have Integral / Non Integral Driver And Make Of Leds Shall Be Of Cree / Seoul 3535 Discrete Smd Colour Leds, Lm80 Certified. The Lum Shall Havelow Junction Thermal Resistance For Long Life And Low Lumen Depreciation With Luminous Flux Maintenance 70%, 50,000 Hrs (L70b20),Excellent Colour Mixing With Various Beam Possibilities From 10° Spot To 90° Wide. The Lum Shall Have Electrical System Of Input Ac Voltage : 140 To 277V Ac, Frequency : 50 / 60 Hz Lum Efficacy : 80 To 100 Lumens/Watt, Cct (K) : 3000K / 4000K / 5700Koptics : Symmetric : 10° /15° / 5° X 20° / 25° /10° X 60° /15° X 45° Outdoor Rated >90% Efficiency Constant Current / Constant Voltage Drivers Integral / In Separate Ip66 Driver Box, Low Current Harmonics : Thd < 10%, Low Flicker : <3%, Ambient Temperature Range : -30°C To +50°C. The Lum Shall Have Optical Properties Ofphotometric Beam Options For - Facade Lighting With High Performance Optical Grade Lenses In Pmma / Pc. Photometric Design Data Optics Shall Be As Per Is 10322 (Part 5 / Sec.5) 2012 & 2015. The Lum Shall Be Ip66, Ik08 As Per Iec-En 62262. Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Dimension Shall Be 320X60x108mm. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Of Flood 75 Watt Flood Light.The Housing Shall Be Of High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating With Multiple Color Options, Robust, Sleek Design With Excellent Heat Dissipation With 360° Cradle Movement For Omnidirectional Precise Focusing The Housing Shall Be With 4Mm Thick Extra Clear Toughened Glass With Silicon Moulded & Extruded Gaskets For Ip66 Rating. The Hosing Shall Come With Separate Integral Driver Compartment Ip 66. Hosing Shall Be Made Of Stainless Steel - Aisi 304 Grade Hardware With Minimised Windage Area (0.0676M²) The Housing Designed With Thermal Managment Of Radiator Fins In Vertical Direction To Ensure Proper Air Convection. Their Shall Be Separate Integral Driver Compartment For Thermal Isolation & Not To Affect Led Compartment During Maintenance, Provided With Brass Pg9 Cable Gland. The Luminiar Shall Be As Per Is 10322 (Part5/ Sec.5) & Ip66, Ik08 As Per Iec-En 62262 With Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Leds Shall Be High Efficacy (>145Lm/W) Outdoor Illumination Grade Smd Leds, Luminous Flux Maintenance 80%, 50,000 Hrs (L80b20), High Color Rendering :Cri-70, Thevarious Cct Rgbw. The Lum Shall Be Outdoor Rated >90% Efficiency Constant Current Drivers With Over Voltage (440V Ac)/Undervoltage, Short Circuit & Open Circuit Protection 4Kv / 5Kv / 6Kv Inbuilt Surge Protection With Optional 10Kv / 20 Kv External Spd And Low Current Harmonics : Thd < 10%. The Lum Shall Be Low Flicker :<3% With Ambient Temperature Range : -30°C To 45°C. The Lum Shall Come With High Performance Optical Grade Lenses In Pmma / Pc And All Photometric Design Data For All Optics Available. The Frequency Of Lum Shall Be In Range Of 50 / 60 Hz With Luminous Efficacy Up To 120 Lumens /Watt. The Lum Shall Come With Cct (K) Option Of 3000K / 4000K / Rgb / Rgbw /Single Colour. The Lum Shall Have Optics In Degree : Symmetric : 10° /25° /35° /50° /60° /90° Asymmetric : 20°X 90° Elliptical / Fn - Forward Asymmetric 45Deg.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supply And Erectionand Programming Of 2Universe (1024Channels) Dmx Controller With Following Features & Specifications: Programmable With Software Offeringincredible Power With Multi-Zone, Extended Triggers And 16-Bit Channels Management. Intuitive Backlit Keyboard With 10 Presets And Zone Selection. With An Ethernet Connection And Wifi, The Scontroller Can Be Controlled Using Remote Apps From A Smartphone Or Tablet. This Is Built On The Latest Generation Of Lighting Controllers And Combines All Recent Innovations. 2X Dmx512 Universes In Live Mode (Computer/Tablet) • 2X Dmx512 Universes In Stand Alone Mode • Expandable From 2 To 4 Dmx512 Universes • Intuitive Backlit Keyboard With 10 Presets • 99 Scenes (Total) Across 5 Zones • Usb & Ethernet For Programming/Control • Multi-Zone Microsd Memory • 16 Dry Contact Trigger Ports Via 20-Pin Idc Socket • Clock And Calendar With Sunrise/Sunset Triggering • Network Communication. Control Lighting Remotely • Oem Customization, • Windows/Mac Software To Set Dynamic Colors/Effects, • Phone/Ipad/Android Remote And Programming Apps • Metal Bracket, Mount To A Wall Or Under A Desk, • Dmx In Or Out. Rdm Ready. • Extended Triggering Possibilities (Tca). Technical Data Input Power 5-5.5V Dc 0.6A Output Protocol Dmx512, Programmability Windows, Mac Os, Ios, Android Connections Type C Usb, Xlr3, Ethernet, 20-Pin (2X10) Male Idc Socket, Battery, Tcp Connections 2, Memory Microsd Sd & Sdhc (32Gb Max), Environment Ip20. 0°C - 50°C Buttons 10 Buttons For Direct Access 2 Buttons To Change Scene + 1 Button To Change Zone Dimensions: 160X90x45mm 268G , Supply And Erection Dmx/ Rdm Splitter/ Amplifier 1:4 Used In The Dmx/Rdm Lighting Control System. Automatically Recognize Dmx/Rdm Signals. 1 Channel Input, 4 Channels Distributed Output, There Is A Independently Photoelectricity Insulation Of >3Kv Between Input And Output Terminals, And Output Terminals Among 4 Channels, And 1 Bypass Channel, Bypass Function For Expanding Dmx Device Number. O/P Port- 3Pin Xlr-4, Relay Function For Amplifying Weak Dmx/Rdm Signals And Extending The Signal Transmission Distance. , Supply And Erection0.75 Sq Mm 3 Pin Jumper Cable Of 3Mtr Length For Dmx , Supply And Erection Dmx Cables 3 / 5 Core , Supply And Erectionof 6 Push Button Keypad/Panel Made Of Aluminium Brushed Cnc Style Modular With 6 Individual Push Buttons That Can Trigger The Dry Port Contacts. The Button Shall Be Quoted Along With Controllers Compatile With Dmx Controllers Protocal , Supply And Erection Of Underwater Light Rgb For Water Boies , Supply And Erection Of Decorative Pole Of 7Mtr Height Trishul Single/Double Arm Pole Made Of Gi Sections Of 114.3 X 3.5 X 4000Mm And 89Mm X 3 X 3000Mm. Base Casting Of 700Mm Height With Base Plate Section Of 380Mm Dia. The Base Plate Shall Be Of 12Mm Thick And Shall Gradually Move Up To 120Mm Height And Shall Have 300Mm Dia That Shall Again Taper In To 100 Height With 2 Ring Design Of 15Mm Thick And 200Mm Dia. It Shall Again Taper Out With A Curve Unto 430Mm Height With 230Mm Dia And Top 143Mm Dia. The 430Mm Height Section Shall Have A Door Of Size 160Mm On Bottom And 100 On Top With An Height Of 235Mm. The Door Shall Have A Floral Design To Give And Aesthetic Look. Bracket Provided With Reducer/Expander For Holding The Single/Double Arm Bracket Length 1000Mm On Each Side. The Bracket Shall Have Fretwork Pattern Design On The Bracket Arm. 750Mm Which Shall Be In Position Perpendicular To Ground. Bracket Stem Shall Be Crowned At Top With A Frp Bajrang Design Of 500Mm Height. The Bracket Shall Be With Provision For Placing Suspended Type Led Fixture Lights On Top. Pole Shall Have Aluminum Casting Ring Embellishments In Between The Pole Shaft. The Base Casting Shall Have Provision For Inbuilt Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom. Mounting Steel Plate Have Hole Suitable For Foundation Bolts Of Size M16 X 600Mm. Gi Pole Shall Be Painted In 3 Coat Process (>50 Micron) 1St Coat With Etch Primer, 2Nd Coat With Epoxy Zinc Primer & 3Rd Final Coat With Pu Paint.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only. , Supply And Erection Of Decorative Pole Of 9Mtr Height Trishul Double Arm Pole Made Of Gi Sections Of 114.3 X 3.5 X 6000Mm And 89Mm X 3 X 3000Mm. Base Casting Of 700Mm Height With Base Plate Section Of 380Mm Dia. The Base Plate Shall Be Of 20Mm Thick And Shall Gradually Move Up To 120Mm Height And Shall Have 300Mm Dia That Shall Again Taper In To 100 Height With 2 Ring Design Of 15Mm Thick And 200Mm Dia. It Shall Again Taper Out With A Curve Unto 430Mm Height With 230Mm Dia And Top 143Mm Dia. The 430Mm Height Section Shall Have A Door Of Size 160Mm On Bottom And 100 On Top With An Height Of 235Mm. The Door Shall Have A Floral Design To Give And Aesthetic Look. Bracket Provided With Reducer/Expander For Holding The Single/Double Arm Bracket Length 1000Mm On Each Side. The Bracket Shall Have Fretwork Pattern Design On The Bracket Arm. 750Mm Which Shall Be In Position Perpendicular To Ground. Bracket Stem Shall Be Crowned At Top With A Frp Trishul Design Of 500Mm Height. The Bracket Shall Be With Provision For Placing Suspended Type Led Fixture Lights On Top. Pole Shall Have Aluminum Casting Ring Embellishments In Between The Pole Shaft. The Base Casting Shall Have Provision For Inbuilt Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom. Mounting Steel Plate Have Hole Suitable For Foundation Bolts Of Size M16 X 600Mm. Gi Pole Shall Be Painted In 3 Coat Process (>50 Micron) 1St Coat With Etch Primer, 2Nd Coat With Epoxy Zinc Primer & 3Rd Final Coat With Pu Paint.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only. , Supply And Erection Of Decorative Pole Of 9Mtr Height Trishul Double Arm Pole Made Of Gi Sections Of 114.3 X 3.5 X 6000Mm And 89Mm X 3 X 3000Mm. Base Casting Of 700Mm Height With Base Plate Section Of 380Mm Dia. The Base Plate Shall Be Of 20Mm Thick And Shall Gradually Move Up To 120Mm Height And Shall Have 300Mm Dia That Shall Again Taper In To 100 Height With 2 Ring Design Of 15Mm Thick And 200Mm Dia. It Shall Again Taper Out With A Curve Unto 430Mm Height With 230Mm Dia And Top 143Mm Dia. The 430Mm Height Section Shall Have A Door Of Size 160Mm On Bottom And 100 On Top With An Height Of 235Mm. The Door Shall Have A Floral Design To Give And Aesthetic Look. Bracket Provided With Reducer/Expander For Holding The Single/Double Arm Bracket Length 1000Mm On Each Side. The Bracket Shall Have Fretwork Pattern Design On The Bracket Arm. 750Mm Which Shall Be In Position Perpendicular To Ground. Bracket Stem Shall Be Crowned At Top With A Frp Trishul Design Of 500Mm Height. The Bracket Shall Be With Provision For Placing Suspended Type Led Fixture Lights On Top. Pole Shall Have Aluminum Casting Ring Embellishments In Between The Pole Shaft. The Base Casting Shall Have Provision For Inbuilt Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom. Mounting Steel Plate Have Hole Suitable For Foundation Bolts Of Size M16 X 600Mm. Gi Pole Shall Be Painted In 3 Coat Process (>50 Micron) 1St Coat With Etch Primer, 2Nd Coat With Epoxy Zinc Primer & 3Rd Final Coat With Pu Paint.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only , Supply And Erection Of Frp Designer Lighting Pole Made Of Marine Quality Composite. It Is Reinforced With Glass Fibre Chopped Strand Mat Emc450, With Area Weight Of =/- 7.5% As Per Iso3374, Moisture Content Of <20% As Per Iso3344, Size Content Of 3.7(1+31%) As Per Iso 1887 And Breakage Strength Of >140N As Per Iso 3342. Isophthalic Unsaturated Polyester Laminating Resin Having Medium Viscosity And Low Reactivity Based On Isophthalic Acid And Standard Glycols, Dissolved In Styrene Monomer Is Used In Making The Product. The Resin Has Viscosity At 25°C ( P ): 400 To 500, Acid Value (Mg Koh/Gm): 15-20, Specific Gravity At 25°C: :1.11‡0.02, Volatile Content (%): 38 +/-3, Gel Time At 30°C (Minutes), (With Resin = 100 Grams; Accelerator 3% Cobalt Octoate = 1.0 And Catalyst Mekp M-50= 1.5 Ml): 8 To 12.Curedclear Cast Resins Comes With The Following Properties: Barcol Hardness: 42, :42 Heat Deflection Temperature (°C): 94, Tensile Strength (Kg/Cm2): 600, Tensile Modulus Map Of 3100; Elongation At Break: 2.5%; Flexural Strength (Kg/Cm2): 1050, Flexural Modulus (Mpa) Of 3200, Water Absorption @25°C (Mg) (After 24Hours) Of 20. The Method Of Testing And The Tolerances Are As Prescribed In Is-6746-1994. The Product Is Weatherproof And Maintenance Free With Long Design Life. Pre-Paint Treatments It Is A Self-Coloured Textured Surface Finish With Scratch-Resistant, Aliphatic Grade U.V. Stabilized Pu Paint With Uv Stable Polyurethane With Viscosity Of 80(+/-3 Sec), Gravity 97(+/-3)Grams, Fineness Of Grind 3 Micron With Long-Standing Life. The Frp Is Of Minimum 2 Mm Thickness With 10% Tolerance. The Frp Pole Is 4000 Mm Ht & 1500 Mm Wide. The Pole Has 1 Pc Luminaire On Top Which Is Suitable For 50Wt Led& 4 Diya In Fountain Shapes At The Base Bollard. The Pole Has Metal Section Reinforced With Frp For Product Stability. The Pole Comes With A Base Plate To Mount It On The Floor Surface.. All Hardware Is Ss304. The Pole Should Be As Per Designed By Pmc And Approved By Engineer In Charge. With 2 Years Warranty.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only , Supply And Erection Of Lader Bollardthe Bollard Shall Be Customized Should Be As Per Designed By Pmc And Approved By Engineer In Charge. With 2 Years Warranty.Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse, Rewards Only , Supplying And Erecting Of Flood 200 Watt Flood Light.The Housing Shall Be Of High Pressure Die Cast Aluminium Alloy Housing With Polyester Powder Coating With Multiple Color Options, Robust, Sleek Design With Excellent Heat Dissipation With 360° Cradle Movement For Omnidirectional Precise Focusing The Housing Shall Be With 4Mm Thick Extra Clear Toughened Glass With Silicon Moulded & Extruded Gaskets For Ip66 Rating. The Hosing Shall Come With Separate Integral Driver Compartment Ip 66. Hosing Shall Be Made Of Stainless Steel - Aisi 304 Grade Hardware With Minimised Windage Area (0.0676M²) The Housing Designed With Thermal Managment Of Radiator Fins In Vertical Direction To Ensure Proper Air Convection. Their Shall Be Separate Integral Driver Compartment For Thermal Isolation & Not To Affect Led Compartment During Maintenance, Provided With Brass Pg9 Cable Gland. The Luminiar Shall Be As Per Is 10322 (Part5/ Sec.5) & Ip66, Ik08 As Per Iec-En 62262 With Surface Coating Resistant To Salt Spray Tests Pursuant To Standard Uni En Iso 9227. The Leds Shall Be High Efficacy (>145Lm/W) Outdoor Illumination Grade Smd Leds, Luminous Flux Maintenance 80%, 50,000 Hrs (L80b20), High Color Rendering :Cri-70, Thevarious Cct Rgbw. The Lum Shall Be Outdoor Rated >90% Efficiency Constant Current Drivers With Over Voltage (440V Ac)/Undervoltage, Short Circuit & Open Circuit Protection 4Kv / 5Kv / 6Kv Inbuilt Surge Protection With Optional 10Kv / 20 Kv External Spd And Low Current Harmonics : Thd < 10%. The Lum Shall Be Low Flicker :<3% With Ambient Temperature Range : -30°C To 45°C. The Lum Shall Come With High Performance Optical Grade Lenses In Pmma / Pc And All Photometric Design Data For All Optics Available. The Frequency Of Lum Shall Be In Range Of 50 / 60 Hz With Luminous Efficacy Up To 120 Lumens /Watt. The Lum Shall Come With Cct (K) Option Of 3000K / 4000K / Rgb / Rgbw /Single Colour. The Lum Shall Have Optics In Degree : Symmetric : 10° /25° /35° /50° /60° /90° Asymmetric : 20°X 90° Elliptical / Fn - Forward Asymmetric 45Deg.Sample Should Be Submitted For Concerned Engineer In Charge & Architect For Approval Of Light Fixture. Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erecting Integrated Led Posttop Light Fitting Min 140-150 Watt, The Lights Shall Be Die Cast Aluminum Housing With Spun Aluminum Top Cover Graphite Grey (Ral 7024), Along Decorative Crown Made Of Aluminum With Broom Golden Yellow (Ral 1032) ?Nished. The Luminiares Shall Come With Anti Corrosive Epoxy Polyester Powder Coated Graphite Grey / Black Finish, Uv Stabilized Clear Pc Diffuser Concealed With Ss Hardwares, Special Designed Die Cast Knob & 3Mm Thickness Ms Pole Mounting Bracket, The Lights Shall Be Highly Efficient Lm 80 Certified Smd Leds (> 150Lm/W) Mounted On Mcpcb, Pre-Wired With Constant Current Integrated Led Driver, Built In Surge 4Kv, The Fitting Shall Be Equiped With Additional Surge Protection Device 10Kv, Wide Operating Voltage Range 140 - 270V~, 50Hz, Driver Efficiency > 85% , Full Load Thdi < 10%, Working Ambient Temperature -10°C ~ + 50°C, Average Light Source Life (L70b50) 50,000Hrs, Instant Start Flicker Free Operation, Environment Friendly, Without Mercury, No Harmful Uv & Ir Radiation, Impact Resistance Ik08, Electrical Class 1 Impact Resistance Ik08, Cri = 70, Power Factory = 0.95, Color Temprature 3000K /4000K/6500K. Lumen Maintenance Data Shall Be Led Testing Per Iesna Lm-80-08 And Projected Per Iesna Tm-21-11 Approved Make Shall Be Philips Color Kinetics, Neri, Maplux, Lighting Technology Ltd, Zumtobel, Gva Lighting, Lumen Pulse Only. , Supplying And Erectingof 25M Trishul Mast With Shaft In Three Sections Suitable For 47M/Sec Wind Speed (As Per Is 875),Comprising Of Trishul Head And Damro On The Top Of The Mast. A. Base Dia. And Top Diameter (A/F) Top : 150 Mm / Bottom : 540 Mm Three Section Shall Be Of 520 B. Plate Thickness: Top : 4 Mm Middle : 4 Mm Bottom : 5 Mm. Cross Section Of Mast : 20 Side Polygon. Standard For Of Galvanisation : As Per Bs En Iso 1461 Size Of Opening And Door At Base : 1200 X 250 Mm Diameter Of Base Plate : 730 Mm Thickness Of Base Plate : 30 Mm Lightning Protection Finial : G.I Single Spike Max.Wind Speed : 50M/S As Per Is : 875 (Part - Iii) Number Of Foundation Bolts : 12 Nos. Pcd Of Foundation Bolts : 650 Mm Type / Diameter / Length Of Foundation Bolts : Ts 600 / 30 Mm Dia / 850 Mm Long. Material Construction : Hot Rolled Steel Plate Conform To Is 2062/Bsen 10025 Or Equivalent Grade. The Trishul Mast Should Be As Per Designed By Oem And Approved By Architect / Pmc /Engineer In Charge.Approved Make Bajaj, Valmont Philips Only , Supplying And Making Of Foundation Along With Foundation Bolts Manufactured From Special Steel Along With Nuts,Washers,Anchor Plate And Common Template With All Required Materials And Accessories As Per The Approval. The Foundation Design Shall Be As Per Designed Approved By Pmc And Engineer In Charge. , Supplying And Erecting Of Single Dome Aviation Obstraction Led Lamp Fixtures. , Supplying And Erectingof Outdoor Feeder Pillar With 32A Tpn Mcb Incomer, Single Dial Time Switch, 25A Tp Contactor For The Automatic Switching Of Luminaries, Power Tool Control With 2 No 9A Contactors And Raise/Lower Push Button, Incoming 35 Sq. Mm And Out Going 16 & 2.5 Sq. Mm Terminals. , Supplying And Erecting 24V, 240W, Ip67 Cv-Cc Driver Poweroutpur- 240W (±10%)Driver Featuring The Constant Power Mode. Power Sitc Should Operate From140~300Vac And Offers Models With Different Rated Current Ranging Between <3.1A At Full Load. High Efficiency Up To 80%, With The Fanless Design, Must Be Able To Operate At -0°C ~+45°C Case Temperature Under Free Air Convection. Output Parameters: I. Line Regulation: ±5% Ii. Load Regulation: ±5% Iii. Output Current Tolerance: ±5% Iv. Output Voltage Ripple: <3% Driver Protection: I. Input Voltage Protection: Cut-Off Voltage : >300Vac ± 15V , Cut-In Voltage : 290Vac ± 15V Ii. Output Short Circuit Protection: Auto Recovery - Hiccup Mode Iii. Output Open Circuit: Available Iv. Ouput Overload: Auto Recovery - Hiccup Mode V. Over Temperature: Shutdown & Auto Recovery Vi. Isolation B/W Input & Output: Withstand 1.5Kv For 1Minute Vii. Insulation Resistance : Between L & N To Dc Output:>10M? (To Be Measured With Test Voltage Of 500Vdc) Viii. Surge In Dm: 5Kv Driver Should Have En 61000-4-5 Approval For Surge Voltage Protection & Is 15885-2-13 For Bis Approval. Dimension: 219 X 63 X 35 Mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
35.
Rural Development #9364588 Technical Bid
Tender For Purchase Of Library Books At Various Iti S Under Scdd - BASIC ELECTRONICS Auther-BERNAD GROB 3 BASIC ELECTRONICS Auther-SANJAY SHARMA 4 BASIC ELECTRONICS-PRINCIPLES AND APPLICATION Auther-CHINMONY SAHA,ARINDAM HALDER,DEBARATI GANGULY 5 BASIC ELECTRONICSAND LINEARCIRCUITS Auther-N N BHARGAVA 6 BASIC ELECTRONICS DEVICES AND CIRCUITS Auther-MAHESH B PATTIL 7 BASIC ELECTRONICS (SOLID STATE) Auther-B LTHEREJA 8 ELECTRONICS DEVICES AND CIRCUITS Auther-MILLMAN 9 ELECTRONIC DEVICES AND CIRCUITS Auther-J B GUPTHA 10 A TEXT BOOK OF ELECTRONIc CIRCUITS Auther-SEDHA R S 11 FUNDAMENTALSOF ELECTRONIC CIRCUITS Auther-CHARIES K ,ALEXANDER,MATHEW N O, SADIKKU 12 SOLID STATE ELECTRONIC DEVICES Auther-BEN G STREETMAN 13 SOLID STATE DEVICES AND TECHNOLOGY Auther-V SURESH BABU 14 PHYSICS OF SEMICONDUCTOR DEVICES Auther-S M SZE 15 BASIC ELECTRICAL ENGG Auther-M L ANWANI 16 A TEXT BOOK OF ELECTRICAL TECHNOLOGY VOLUME I Auther-B L THEREJA,A K THEREJA 17 A TEXT BOOK OF ELECTRICAL TECHNOLOGY VOLUME II(AC & DC MACHINE Auther-B L THEREJA,A K THEREJA 18 FUNDAMENTALS OF ELECTRICAL ENGINEERING AND ELECTRONICS Auther-S CHAND 19 CONSUMER ELECTRONICS Auther-S P BALI 20 INDUSTRIAL ELECTRONICS AND CONTROL Auther-S K BHATTACHARYA,B CHATTERJEE 21 POWER ELECTRONICS Auther-Dr.P S BIMBHRA 22 POWER ELECTRONICS- DEVICES AND CIRCUITS Auther-V JAGANNATHAN 23 MODERN ELECTRONIC INSTRUMENTATION & MEASUREMENT TECHNIQUES Auther-ALBERT D HELFRICK,WILLIAM D COOPER 24 PRINCIPLES OF ELECTRONIC DEVICES AND CIRCUITS (ANALOG AND DIGITAL) Auther-S CHAND,BL THEREJA,Dr.R S SEDHA 25 DIGITAL FUNDAMENTALS Auther-THOMAS S FLOID 26 FUNDAMENTALS OF DIGITAL CIRCUITS Auther-A ANAND KUMAR 27 DIGITAL CIRCUITS AND DESIGN Auther-S SALIVAHANAN,S ARIVAZHAGAN 28 MODERN DIGITAL ELECTRONICS Auther-R P JAIN 29 COMMUNICATION SYSTEM (ANALOG AND DIGITAL) Auther-Dr. SANJAY SHARMA 30 WIRELESS COMMUNICATION :PRINCIPLES AND PRACTICE Auther-RAPPAPORT 31 MOBILE COMMUNICATION Auther-JOCHEN SCHILLER 32 THE CELLPHONE:THE HISTORY & TECHNOLOGY OF THE GADGET THAT CHANGED THE WORLD Auther-GUY KLEMENS 33 SOLAR PHOTO VOLTAIC POWER SYSTEMS: PRINCIPLES, DESIGN AND APPLICATION Auther-Dr.SUNDARAVADIVELU,SURESH R NORMAN 34 SOLAR PHOTOVOLTAIC TECHNOLOGYAND SYSTEMS- (FUNDAMENTALS,TECHNOLOGY AND APPLICATIONS)Auther-CHETAN SINGH SOLANKI 35 ELECTRONIC COMMUNICATION SYSTEMSAuther-GEORGE KENNEDY,BERNAD DAVIS, S R M PRESANNA 36 MONOCHROME AND COLOUR TELEVISION Auther-R R GULATHI 37 MICROPROCESSORS AND MICROCONTROLLERS Auther-A NAGOOR KANI 38 THE 8051 MICROPROCESSORS AND EMBEDDED SYSTEM Auther-MAZIDI 39 MICROPROCESSORARCHITECTURE PROGRAMMING AND APPLICATIONS WITH THE 8085 Auther-REMESH S GOANKAR 40 THE 8085 MICROPROCESSORARCHITECTURE, PROGRAMMING AND INTERFACING Auther-UDAY KUMAR,UMA SHANKER 41 MICROPROCESSOR AND MICROCONTROLLER (8085,8086,8051- ARCHITECTURE,INTERFACING AND PROGRAMMING) Auther-A P GODSE, D A GODSE 42 8051 MICROCONTROLLER ARCHITECTURE,PROGRAMMING AND APPLICATION Auther-M MAHALAKSHMI 43 THE THE 8051MICROCONTROLLER 8051- ARCHITECTURE, PROGRAMMING,AND APPLICATIONS Auther-KENNETH J AYALA 44 PROGRAMMING ARDUINO :GETTING STARTED WITH SKETCHES Auther-SIMON MONK 45 ARDUINO PROGRAMMING STEP BY STEP GUIDE MASTER ARDUINO HARDWARE AND SOFTWARE Auther-MARK TORVALDS 46 PRINTED CIRCUIT BOARDS(DESIGN,FABRICATION,,ASSEMBLY AND TESTING Auther-R S KHANDPUR 47 FUNDAMENTALS OF COMPUTERS Auther-E BALAGURUSWAMI 48 MODERN COMPUTER HARDWARE COURSE Auther-MANAHAR LOTIA, PRADEEP NAIR,PAYAL LOTIA 49 ELECTRONICS LAB MANUAL VOL-I Auther-K A NAVAS 50 ELECTRONICS LAB MANUAL VOL-II Auther-K A NAVAS 51 OBJECTIVE ELECTRONICSENGINEERING Auther-ARIHANT PUBLICATIONS 52 QUESTION BANK IN ELECTRONICS AND COMMUNICATION ENGINEERINGAuther-J B GUPTHA 53 OBJECTIVE ELECTRICAL, ELECTRONICS AND COMMUNICATION ENGINEERING Auther-B L THEREJA, Er. V K PANDEY 54 P S C-PREVIOUS QUESTIONS AND ANSWERS IN ELECTRICAL/ELECTRONICS ENGINEERING Auther-ELECTRON COLLEGE OF TECHNOLOGY 55 ELECTRONIC MECHANIC TRADE THEORY FORANNUAL AITT EXAMS Auther-A K MITTAL 56 ABC OFELECTRICALENGG Auther - B L THEREJA & A K THERAJA 57 BASICS OF ELECTRICAL ENGG Auther - MEHTA AND GUPTHA 58 BASIC ELECTRICAL ENGG Auther - S K BHATTACHARYA 59 PRINCIPLES OF ELECTRICAL ENGG & ELECTRONICS Auther - V K MEHTA & ROHIT METHA 60 ELECTRIC CIRCUIT ANALYSIS Auther - K S SURESH KUMAR 61 BASICS OF ELECTRICAL ENGG Auther - BABUJAN 62 BASIC ELECTRICAL AND INSTRUMENTATIONENGG Auther - J GNANAVADIVEL 63 FUNDAMENTALS OF ELECTRICITY AND MAGNETISM Auther - S K CHATTERJEE 64 A TEXT BOOK OF ELECTRICAL TECHNOLOGY VOLUME I Auther - B L THEREJA,A K THEREJA 65 A TEXT BOOK OF ELECTRICAL TECHNOLOGY VOLUME II(AC & DC MACHINE Auther - B L THEREJA,A K THEREJA 66 A TEXT BOOK OF ELECTRICAL TECHNOLOGY VOLUME III Auther - B L THEREJA, A K THEREJA 67 PRINCIPLES OF POWER SYSTEM Auther - V K METHA 68 FUNDAMENTALS OF ELECTRICAL ENGINEERING AND ELECTRONICS Auther - BL THEREJA 69 BASIC ELECTRONICS AND LINEAR CIRCUITS Auther - N N BHARGAVA 70 FUNDAMENTALS OF DIGITAL CIRCUITS Auther - A ANAND KUMAR 71 DIGITAL CIRCUITS AND DESIGN Auther - S SALIVAHANAN,S ARIVAZHAGAN 72 BASIC ELECTRONICS(SOLID STATE) Auther - B L THEREJA 73 ELECTRONIC DEVICES AND CIRCUITS Auther - J B GUPTHA 74 ELECTRICAL ENGINEERING OBJECTIVE TYPE Auther - M HANDA & A HANDA 75 OBJECTIVEELECTRICALENGINEERING Auther - G K MITHAL 76 ELECTRICAL MACHINE DRAWING Auther - S K BHATTACHARYA 77 INDUSTRIAL ELECTRONICS AND CONTROL Auther - S K BHATTACHARYA 78 GENERATION DISTRIBUTION & UTILISATION OF ELECTRICAL ENERGY Auther - C L WADHWA 79 THE PERFOMANCE AND DESIGN OF A C MACHINES Auther - M G SAY 80 A COURSE IN ELECTRICAL POWER Auther - J B GUPTHA 81 ELECTRICAL CIRCUIT THEORYAuther - DR D CHATTOPADHYAY 82 LAB MANUALS FOR ELECTRICALMACHINES Auther - D P KOTHARI 83 SWITCH GEAR PROTECTION Auther - J B GUPTHA 84 ELECTRONICS LAB MANUAL VOL-I Auther - K A NAVAS 85 ELECTRONICS LAB MANUAL VOL-II Auther - K A NAVAS 86 OBJECTIVEELECTRICAL & ELECONICS ENGINEERING Auther - B L THERAJA AND V K PANDEY 87 ELECTRIC POWER TRANSMISSION & DISTRIBUTION Auther - J B GUPTHA 88 P S C-PREVIOUS QUESTIONS AND ANSWERS IN ELECTRICAL/ELECTRONICS ENGINEERING Auther - ELECTRON COLLEGE OF TECHNOLOGY 89 FUNDAMENTALS OF ELECTRICITY AND MAGNETISM Auther - S K CHATTERJEE 90 FUNDAMENTALS OF COMPUTERS Auther - E BALAGURUSWAMI 91 BASIC ELECTRICAL ENGG Auther - ANWANI 92 PRINCIPLES OF ELECTRONICS Auther - V K MEHTA 93 QUESTION BANK FOR ELECTRICIAN Auther - ASIAN PUBLICATIONS 94 ELECTRICAL MEASURMENTS AND MEASURING INSTRUMENTS Auther - Er. R K RAJPUT 95 ELECTRICAL AND ELECTRONICS MEASURMENTS AND INSTRUMENTATION Auther - Er. R K RAJPUT 96 HANDBOOK OF ELECTRICAL ENGINEERING Auther - S L BHATIA 97 ELECTRICAL ENGG( OBJECTIVE QUESTIONS & ANSWERS) Auther - V K METHA 98 ELECTRICAL SUBSTATIONAuther - S RAO 99 ELECTRICAL WIRING ESTIMATING & COSTING Auther - S L UPPAL 100 Basic Shop TheoryCarpentryAuther -(R.C.GUPTA) Danpath rai publication 101 A text bookof Work shoptechnology Vol .I&II Auther - R.S.KHURMI&J.K.GUPTA 102 Carpentrya complete guide Auther - H.S.BAWA 103 The complete visual guide to building a house Auther -John Carrol 104 House buildingDIY Guide Auther - William Null 105 Carpentry And construction Auther - Rex Miller 106 How your house works Auther -Chales Miller 107 Timber Frame Auther - Eugine Walls 108 Dewalt- carpentry and framing Auther - Dewalt 109 Complete book offraming Auther - Wiley 110 BUILDING MATERIALS Auther - P.C VARGHEESE 111 BUILDING MATERIALS Auther - RANGWALA 112 BUILDING MATERIALS Auther - RAJPUTH 113 BUILDING MATERIALS Auther - S.K.DUGGAL 114 BUILDING MATERIALS Auther - N SUBRAMANIAN 115 SURVEYING Auther - R.SUBRAMANIAN 116 SURVEYING AND LEVELLING Auther - N.N BASAK 117 SURVEYING AND LEVELLING Auther - PUNMIA 118 ENGINEERING SURVEY Auther - SCHOFIELD 119 SURVEYING - Auther - S.K HUSAIN, M.S NAGARAJ 120 BUILDING CONSTRUCTION Auther - PUNMIA 121 BUILDING CONSTRUCTION Auther - RANGWALA 122 BUILDING CONSTRUCTION Auther - S.CHAND 123 BUILDING CONSTRUCTION Auther - S.K.DUGGAL 124 BUILDING CONSTRUCTION Auther - S.P ARORA 125 ESTIMATION AND COSTING IN CIVIL ENGINEERING Auther - B.N.DUTTA 126 CIVIL ESTIMATING AND COSTING Auther - A K UPADHYAY 127 ESTIMATION AND COSTING IN CIVIL ENGINEERINGTHEORY AND PRACTICE Auther - B.N.DUTTA 128 ESTIMATING AND COSTING Auther - D.D.KOHLI 129 FUNDAMENTALS OF CONSTRUCTION ESTIMATING Auther - DAVID PRATT 130 RAILWAY ENGINEERING Auther - S.C.SEXENA 131 HIGHWAY ENGINEERING Auther - S.K.KHANNA 132 TRAFFIC ENGINEERING & TRANSPORTATION PLANNING Auther - L.R.KADIYALI 133 PRINCIPLES OF TRANSPORTATION ENGINEERING Auther - G.V.RAO 134 RAILWAY TRACK ENGINEERING Auther - J.S.MUNDREY 135 IRRIGATION ENGINEERING & HYDRAULIC STRUCTURE Auther - S.K.GARG 136 IRRIGATION & WATER POWER ENGINEERING Auther - B.C.PUNMIA 137 IRRIGATION,WATER POWER AND WATER RESOURCE ENGINEERING Auther - K.R.ARORA 138 IRRIGATION ENGINEERINGAuther - S R SAHASRABUDHE 139 WATER SUPPLY AND SANITTARY ENGINEERING Auther - RANGWALA 140 WATER SUPPLYENGINEERING Auther - S K GARG 141 HYDROLOGY AND WATER RESOURCES Auther - S.K.GARG 142 A TEST BOOK OF ENGINEERING DRAWING Auther - K V NATARAJAN 143 A TEST BOOK OF ENGINEERING GRAPHICS Auther - P I VARGHESE 144 BUILDING PLANNING AND DRAWING Auther - Dr. N KUMARASWAMY 145 BUILDING PLANNING AND DRAWING Auther - S S BHAVAKATTI 146 CIVIL ENGINEERING CONVENTIONAL AND OBJECTIVE TYPE Auther - R S KHURMI , J K GUPTA 147 HAND BOOK OF CIVIL ENGINEERING Auther - ME EDITORIAL BOARD 148 CIVIL ENGINEERING CONVENTIONAL AND OBJECTIVE TYPE Auther - R AGOR 149 QUESTION BANK IN CIVIL ENGINEERING Auther - V S MURTHY , R SOOD 150 AUTOMOBILE ENGINEERING VOL- 1 Auther - KIRPAL SINGH 151 AUTOMOBILE ENGINEERING VOL- 2 Auther - KIRPAL SINGH 152 A TEXT BOOK OF AUTOMOBILE ENGINEERING Auther - R K RAJPUT 153 AUTOMOBILE ENGINEERING Auther - R B GUPTA 154 AUTOMOBILE ENGINEERING Auther - RAMAKRISHNA 155 AUTOMOBILE MECHANICS Auther - N K GIRI 156 AUTOMOTIVE MECHANICS Auther - CROUSE, ANGLIN 157 AUTOMOTIVE MECHANICS Auther - S SRINIVASAN 158 AUTOMOBILE ENGINEERING Auther - BABU A K 159 BASIC ENGINEERING THERMODYNAMICS Auther - JOEL 160 FITTER COURSE BOOK Auther - RANJAN , NITESH 161 BASIC AND APPLIED THERMODYNAMICS Auther - NAG 162 A TEXT BOOK OF REFRIGERATION AND AIR CONDITIONING Auther - KHURMI/GUPTA 163 ENGINEERING GRAPHICS Auther - K N ANILKUMAR 164 ATB OF BASIC MECHANICAL ENGINEERING Auther - BENJAMIN 165 ENGINEERING DRAWING (GEOMETRICAL DRAWING) Auther - GILL P S 166 HAND BOOK OF MECHANICAL ENGINEERING Auther - MEHTHA SUBASH 167 A HAND BOOK ON ELECTRONICS &COMMUNICATION ENGG: Auther - MADE EASY 168 BASIC ELECTRICAL ENGG: Auther - V K MEHTA 169 MACHINE DRAWING Auther - VARGHESE /JOHN 170 MACHINE DRAWING Auther - N D BHATT 171 FUNDAMENTALS OF ELECTRONICS ENGINEERING Auther - PRASAD RAJENDRA 172 TRUCK ENGINES – FUEL&COMPUTERISED MANAGEMENT SYSTEM Auther - BENNETT 173 AUTOMOTIVE ENGINEERING LIGHT WEIGHT, FUNCTIONAL Auther - CANTOR BRIAN 174 AUTOMOTIVE TECHNOLOGY ENGINE PERFORMANCE Auther - CARRIGAN RUSSELL 175 AUTOMOTIVE TECHNOLOGY HEATING & AIR CONDITIONING Auther - CARRIGAN RUSSELL 176 MATERIALS FOR AUTOMOBILE BODIES Auther - DAVIES GEOFF 177 DESIGN OF AUTOMATIC MACHINERY Auther - DERBY STEPHEN J 178 ELETRIC VEHICLE BATTERY SYSTEMS Auther - DHAMEJA SANDEEP 179 AUTOMOTIVE TECHNOLOGY ENGINE REPAIR Auther - DORRIES ELISABETH H 180 VEHICULAR ELETRIC POWER SYSTEM Auther - EMADI ALI 181 A SYSTEM APPROACHTO AUTOMOTIVE TECHNOLOGY Auther - ERJAVEC 182 AUTOMOTIVE TECHNOLOGY SUSPENSION & STEERING Auther - ERJAVEC JACK 183 AUTOMOTIVE ENGINEERING MANUAL TRANSMISSION VOL -1 Auther - ERJAVEC JACK 184 AUTOMOTIVE ENGINEERING MANUAL TRANSMISSION VOL -2 Auther - ERJAVEC JACK 185 ALTERNATE FUEL TECHNOLOGY – ELECRICAL-HYB-&FUEL Auther - ERJAVEC 186 AUTOMOTIVE TECHNOLOGY BRAKES Auther - ERJAVEC JACK 187 AUTOMOTIVE ENGINEERING AUTOMATIC TRANSMISSION VOL -1 Auther - ERJAVEC JACK 188 AUTOMOTIVE ENGINEERING AUTOMATIC TRANSMISSION VOL -2 Auther - ERJAVEC JACK 189 THE AUTOMOTIVE CHASSIS VOL -1 Auther - GENTA GIANCARLO 190 THE AUTOMOTIVE CHASSIS VOL -2 Auther - GENTA GIANCARLO 191 MAINTENANCE OF AUTOMOTIVE ENGINES Auther - GILLES 192 AUTOMOTIVE ENGINEERING ENGINE REPAIR AND REBUILDING VOL-1 Auther - HADFIELD CHRISTOPHER 193 AUTOMOTIVE ENGINEERING ENGINE REPAIR AND REBUILDING VOL-2 Auther - HADFIELD CHRISTOPHER 194 AN INTRODUCTION TO MODERN VEHICLE DESIGN Auther - HAPPIAN-SMITH,JULIAN 195 AUTOMOTIVE TECHNOLOGY FUELS&EMISSIONS Auther - HOLLEMBEAK BARRY 196 AUTOMOTIVE TECHNOLOGY FUELS&EMISSIONS VOL -2 Auther - HOLLEMBEAK BARRY 197 AUTOMOTIVE TECHNOLOGY SERVICE & MAINTENANCE Auther - KNOWELS DON 198 AUTOMOTIVE ENGINEERING SUSPENSION AND STEERING VOL - 1 Auther - KNOWELS DON 199 AUTOMOTIVE ENGINEERING SUSPENSION AND STEERING VOL - 2 Auther - KNOWELS DON 200 THE AUTOMOTIVE BODY VOL – 1COMPONENTS DESIGN Auther - MORELLO LORENZO 201 THE AUTOMOTIVE BODY VOL – 2 SYSTEM DESIGNAuther - MORELLO LORENZO 202 AUTOMOTIVE TECHNOLOGY SERVICE & SYSTEM Auther - OWEN CLIFTON E 203 AUTOMOTIVE ENGINEERING BRAKE SYSTEM VOL - 1 Auther - OWEM LE 204 AUTOMOTIVE ENGINEERING BRAKE SYSTEM VOL - 2 Auther - OWEM LE 205 AUTOMOTIVE ENGINEERING ENGINE PERFORMANCE VOL - 1 Auther - PICKERILL KEN 206 AUTOMOTIVE CHASSIS Auther - REIMPELL J 207 AUTOMOTIVE ENGINEERING ENGINE PERFORMANCE VOL - 2 Auther - PICKERILL KEN 208 AUTOMOTIVE ENGINEERING HEATING & AIR CONDITIONING Auther - SCHNUBEL MARK 209 WORK SHOP TECHNOLOGY VOL .1 Auther - SK HAJRA CHOUDHURY,AK HAJRA CHOUDHURY,NIRJHAR ROY 210 WORK SHOP TECHNOLOGY VOL .2 Auther - SK HAJRA CHOUDHURY,AK HAJRA CHOUDHURY,NIRJHAR ROY 211 WORK SHOP CALCULATION & SCIENCE Auther - KAPIL DEV 212 METALLURGICAL ENGINEERING (MULTI CHOICE QUESTIONS AND ANSWERS ) Auther - O P GUPTA 213 FLUID MECHANICS AND HYDRAULIC MACHINES Auther - S CHAND 214 MECHANICAL ENGINEERING (OBJECTIVE TYPE) Auther - D HANDA 215 MECHANICAL ENGINEERING FOR COMPETITIONS Auther - R K JAIN 216 MECHANICAL ENGINEERING (OBJECTIVE TYPE QUESTIONS ) Auther - S CHAND 217 MECHANICAL ENGINEERING (CONVECTIONAL AND OBJECTIVE TYPE ) Auther - R S KHURMI ,JK GUPTA 218 OBJECTIVES AUTOMOBILE ENGINEERING Auther -INDIA PUBLICATION 219 MPSC (MECHANICAL AND AUTOMOBILE ENGINEERING ) Auther - K SAGAR PUBLICATIONS 220 OBJECTIVE AUTOMOBILE ENGINEERING Auther - P K MISHRA 221 MECHANICAL ENGINEERING OBJECTIVE Auther - D S KUMAR 222 ENGINEERING MATHEMATICS Auther - KARAIYA 223 AUTOMOTIVE ELECRICAL AND ELECTRONICS Auther - A K BABU 224 AUTOMOTIVE MASTER TECHNICIAN Auther - GRAHAM STOAKES 225 HYBRID ELETRIC VEHICLES Auther - WILEY 226 ENGINE TESTING 2ED Auther - BUTTERWORTH 227 STRENGTH OF MATERIALS (3RD ED) Auther - TIMOSHENKO,STEPHEN 228 THE ILLUSTRATED AUTOCAD QUICK REFERENCE WINDOWS Auther - GRABOWSKI 229 INTERNAL COMBUSTION ENGINE Auther - MATHUR 230 MECHANICAL ENGINEERING OBJECTIVE Auther - BANSAL 231 A TEXTBOOK OF FLUID MECHANICS AND HYDRAULIC MACHINES Auther - BANSAL 232 A TEXTBOOK OF INTERNAL COMBUSTION ENGINE Auther - RAJPUT 233 THERMAL ENGINEERING Auther - RAJPUT 234 DESIGN OF MACHINE ELEMENTS Auther - BHANDARI V 235 THEORY OF LUBRICATION PB Auther - GHOSH M K 236 STRENGTH OF MATERIALS Auther - RATAN S S 237 MAGNETIC BEARING AND BEARINGLESS DRIVES Auther - CHIBA 238 ATEXTBOOK ON ENGINEERING GRAPHICS Auther - SATHEESH PAUL 239 MECHATRONICS: ELECTRONIC CONTROL SYSTEMS IN MECHANICAL AND ELECTRICAL ENGINEERING, 4E Auther - BOLTON 240 INTRODUCTION TO INDUSTRIAL ROBOTICS, 1/E Auther - RAMACHANDRAN NAGARAJAN 241 STRENGTH OF MATERIALS Auther - KHURMI R S 242 BASIC MANUFACTURING PROCESSES (WORKSHOP TECHNOLOGY) (FOR UPTU, LUCKNOW) Auther - KHURMI R.S. & GUPTA J.K. 243 APPLIED MECHANICS AND STRENGTH OF MATERIAL Auther - KHURMI R.S. 244 MATERIAL SCIENCE Auther - SEDHA R.S 245 HYDRAULICS & PNEUMATICS CONTROLS Auther - SHANMUGA SUNDRAM 246 OBJECTIVE TYPE QUESTION IN MECH ENGG Auther - SING V.P 247 MECHATRONICS & MICROPROCESSORS Auther - K.P RAMACHANDRAN 248 ELETRICAL TECHNOLOGY ( I TO IV VOL ) Auther - THERAJA 249 WORK SHOP CALCULATION AND SCIENCE Auther - MEHTA AND GUPTA 250 PLUMBING(MALAYALAM) Auther - B JAYAPALAN 251 DESIGN & PRACTICAL HANDBOOKON PLUMBING Auther - VIVEKANAND & MOHAN 252 PLUMBING DESIGN AND PRACTICE(English) Auther - Deolalikar 253 WATER SUPPLY ENGINERING Auther - SANTHOSH KUMAR GARG 254 WATER SUPPLY AND SANITARY ENGINERING Auther - RANGAWALA 255 BUILDING MATERIALS AND CONSTRUCTION Auther - Dr ANIL KUMAR MISRA 256 BUILDING CONSTRUCTION Auther - RANGAWALA 257 MECHANICAL WOEKSHOP PRACTICEAuther - K C JOHN 258 PLUMBER TRADE THEORY Auther - (ASIAN PUBLICATION) 259 Industrial safety &EnvironmentManagement System (English) Auther - R.J.Jain & Sunil.S .Rao,Khanna,Publication 260 Air pollution & Global Warranty Auther - Markz Jacobson 261 Personal Finance & Enterprenership (four book bundle) Auther - Jeff Lively, Kindle Edition 262 Free hand drawing Light and Shade, Free hand Perspective Auther - Kindle Edition 263 Practical Letter Book (Lettering, Caligraphy, Typography) Auther - J.H. Kaemmer, Kindle Edition 264 DTP Trainings Guide Auther - Sathish Jain 265 Corel Draw X 7 Official Guide Auther - Gary DavidBouton 266 Photoshop CC For Beginners Auther - Joseph Joyner 267 Notes on the Preparation of Silk Screen for use in Silk Screen Printing (English) Auther - Anon 268 Printing & Decorating Methods Auther - Franklin Classics Trade Press 269 Powder Coating Technology Hand Book Auther - Engineers India Research Institute 270 Anatomy and DrawingAuther - Victor Derard 271 Oxford Advanced Learners Dictionary with DVD Auther - Oxford University Press 272 Advanced Spoken English Auther - Madan sood 273 Basics of Computer Auther - U&S Publishers 274 BGAS CSWIP Painting Inspector Text Auther - TWI India Private Limited 275 Surveying Vol.I,17/e PB Auther - Punmia B C 276 Surveying Vol.III (Higher Surveying),15/e PB Auther - Punmia B C 277 Surveying 7/e: Theory and Practice PBAuther - Anderson J M 278 Surveying Vol.2 4/e (PB) Auther - Duggal 279 Surveying Vol.14/e (PB) Auther - Duggal S K 280 Suveying and Levelling 2/e P B Auther - Subramanian 281 Surveying & Levelling Part-2,PB Auther - KanetkarT P 282 Surveying Volume-1 (In SI Units),12/e PB Auther - Arora K R 283 Surveying Volume-3 (SI Units)PB Auther - Arora K R 284 Railway Transportation: Engineering,Operation and Management 2/e PB Auther - Ponnuswamy S 285 Railway Engineering 2/e PB Auther - Agarwal M M 286 Principles of Railway Engineering25/e PB Auther - Rangawala S C 287 Building Construction,Metric Volume-4,4/e (PB) Auther - McKay JK 288 Building Construction,Metric Volume-1,5/e (PB) Auther - McKay WB 289 Building Construction,Metric Volume-2,4/e (PB) Auther - McKay WB 290 Building Construction,Metric Volume-3,5/e (PB) Auther - McKay WB 291 Building Construction (PB) Auther - Meheta M 292 Building Construction Materials and Techniques 1/8e (PB) Auther - Purushothama R 293 Building Construction 2/e PB Auther - Varghese P C 294 Building Construction and Materials,14/e PB Auther - Singh,Guruchara 295 Building Construction PB Auther - Bhavikatti S S 296 Building Construction,33/e PB Auther - Rangawala 297 Textbook of Building Construction (Including Engineering Materials for Engineering students) Auther - Arora S P 298 Textbook of of Building Construction and Construction Materials PB Auther - Birdie G S 299 Building Construction,11/e PB Auther - Punmia B C 300 Textbook of of Building Construction (Including Engineering Materials for Engineering students) Auther - Arora S P 301 Building and Construction Materials:Testing and Quality Control (Lab Manual Series) Auther - Gambhir J 302 Building Materials: Products,Properties and Systems PB Auther - Gambhir M L 303 Concrete:Microstructure,Properties,and Materials PB Auther - Mehta 304 Strength of Materials SOS,4/e PB Auther - Nash William A 305 Building Materials andConstruction PB Auther - Sahu G C 306 Civil Engineering Materials PB Auther - Somayaji S 307 Building Materilas PBAuther - Varghese P C 308 Mechanics of Materials 2/e PB Auther - Gere J M 309 Material Characteristics (HB) Auther - Angelo 310 Mechanics of Materials 2/e PB Auther - Pytel 311 Strngth of Materials (PB) Auther - Shukla K K 312 Enginering materilas 9/e (PB) Auther - Budinski K G 313 Basic Engineering Mechanics and Strength of Materilas PB Auther - Das,Madan moha 314 Basic Civil Engineering (KTU Syllabus) PB Auther - Nalpat S 315 Basics of Civil engineering (KTU) PB Auther - Swarnalatha 316 Elements of Civil Engineering,1/e PB Auther - Saikia,Mini Da 317 Introduction to Civil Engineering PB Auther - Jayagopal S 318 Civil Engineering (Conventional& Objective Type) PB Auther - Khurmi R S 319 Estimating and Costing In Civil Engineering (Eng.Ed) : Theory and Practice 28/e PB Auther - Dutta B N 320 Estimating and Costing In Civil Engineering :Theory and Practice including Specifications and Valuations) Auther - Dutta B N 321 Fundamentals of Civil Engineering 4/e PB Auther - Thomas R M 322 Basics of Civil engineering Revised 3/e (Calicut ) PB Auther - Michael A 323 Basic Civil Engineering (KTU) PB Auther - Minu S 324 Civil Engineering (Objective Type) PB Auther - Reddy P J R 325 Estimating,Costing,Specification&Valuation in Civil Engineering(Includes Computer Estimation) Auther - Chakraborthi M 326 Construction planning,Equipments and Methods 7/e PB Auther - Peufoy,Robert 327 Building Drawingwith an Integrated Approach to Built Environment 5/e Pb Auther - Shah M G 328 Solid Waste Engineering PB Auther - Versilind 329 Highway Engineering PB Auther - Rangwala 330 Water Supply and Santary Enginnering PB Auther - Rangwala 331 Principles of Highway Engineering PB Auther - Khitoliya R K 332 Principles and Practicesof Highway Engineering (Including Expressways and Airport Enginnering) Auther - Kadyali L R 333 Professsional Construction management 3/e PB Auther - Barrie D S 334 Water and Wastewater Engineering:Desian Principles and PracticeAuther - Davis M L 335 Construction Management Fundamentals 2/e PB Auther - knuston K 336 Estimating Construction Costs 6/e (PB) Auther - peurifoy R L 337 Bridge Enginnering ,2/e HB Auther - Ponnuswamy S 338 Highway Engineering 10e PB Auther - Khanna S K 339 Traffic Engineering 4/e (PB) Auther - Roess.R P 340 Water Resourcing Engineering PB Auther - Wurbs R A 341 Watershed Management PB Auther - Das M M 342 Design of Bridge Structures,2nd Edition PB Auther - Jagadeesh T R 343 Solid and Liquid Waste Management Waste To Wealth (PB) Auther - Rajaraman V 344 Engineering inRocks for Slopes,Foundation 3/e (PB) Auther - Ramamurthy T 345 Indian Practical Civil Engineers Handbook HB Auther - Khanna P N 346 Assistant Engineering Rank fileAuther - Electron 347 Objective Civil Engineering Auther - Electron 348 Surveyor Rank File Auther - Electron 349 Psc Previous questions & Answers in Civil Engineering Auther - Electron 350 Objectives in Civil Engineering Auther - P K Nair 351 Upkars Objective Civil Engineering Auther - P K Mishra 352 A Handbook on Civil EngineeringAuther - Prof Jyoti Nag 353 Practice Sets Civil EngineeringAuther - Piyush Gupta 354 Civil Engineering objective TypeAuther - S Handa 355 Mastering Autocad (Malayalam) Auther - Info kairali 356 Autocad 2013 Auther - Vishnu P Singh 357 Autocad 2009/2010/2013 Auther - Vishnu Priya Singh 358 Cativa V5R20 for Engineering & Designers Auther - Prof Sham Tickoo 359 Design of Bridges Auther - N Krishna raju 360 A Handbook on Civil EngineeringAuther - made easy pub 361 handbook of Civil Engineering Auther - P Sheena 362 Survey (Malayalam) Auther - T V George 363 Dictionary of Technical terms Auther - F S Crispin 364 Oxford Dictonary of Surveying & Civil Engineering Auther - Christopher 365 Strength of Materials Auther - R S Khurumi 366 Strength of Materials Auther - S Ramamrutha 367 A text book Draughtsman CivilAuther - R S Malik 368 Irrigation Water Resources &water power Engineering Auther - P N Modi 369 Irrigation Water&water power Engineering Auther - Dr B C Punmia 370 Computer aided EngineeringDrawing Auther - Subrata pal 371 Engineering Drawing &Graphics using Autocad Auther - T Jeyapoovan 372 Building Design &Civil Engineering Drawing Auther - Dr Balagopal T S Prabhu 373 Irrigation & Drainage Management Auther - R N Sahay 374 Dictionary of geographical Information systems Auther - Haojam Rocky Singh 375 Remotesensing & geographic Information System Auther - A M Chandra 376 An Introduction to geographical information systems Auther - Ian Heywood 377 English English Malayalam Dictionary Auther - T Ramalingam Pillai 378 Malayalam Malayalam English Dictionary Auther - Dr B C Balakrishnan 379 English English Malayalam Dictionary Auther - Prof A P Namboodiri 380 Malayalam English Dictionary Auther - DC Books 381 English English Malayalam DictionaryMalayalam Dictionary Auther - Star Books 382 Surveyor (NSQF-5 Annual Syll.)TH.& Asst/Test (SOL) 1ST and 2nd Year Auther - G S Sethi 383 W/Shop cal& Sc (D manCivil & Surv) (NSQF-5 Syll) Nimi-DGET Auther - Kapil Dev,Murthy 384 EmployabilitySkills (NSQF Annual Syll) for all Trades) Auther - Asian coreTeam 385 Man Civil TH & Pract (With Sol.Asst) (NSQF-5 Syll) Sem 1& 2 Auther - Malik & Meo 386 D-Man Civil Th & Pract (With Sol Asst) (NSQF-5 Syll)Sem 3 & 1 Auther - Singh & Singh 387 Engg.Drg Common for All (NSQF Levl-4/5) Auther - Kapil Dev 388 Q-Bank Employability Skills (MCQ & Upto date SOL Paper) NSQF-4/5) Auther - Nagaradjane 389 Employability Skills (NSQF-Annual Syll.)(For All, Trades) Auther - Asian Core Team 390 Books Land Surveyor Auther - Cambridge 391 Advanced Surveying Auther - Satheesh Gopi,Sathikumar 392 Fundamentals of Surveying Auther - S K Roy 393 Building MaterialAuther - S K Duggal 394 Surveying Auther - Kumar 395 Surveying Vol-1 Auther - S K Duggal 396 Surveyor rank File Auther - Electron Publication 397 Civil Previous Question paper Auther - Electron Publication 398 Remote Sensing & Environment Auther - John R Johnsen 399 Remote Sensing & GIS Auther - Basuded Bhatta 400 Basics of Remote Sensing & GIS Auther - Dr.S Kumar 401 Advanced Surveying Auther - Gopi Sathessh 402 GIS Fundamntal Application and Implemantation Auther - K Elangovan Elangovan 403 Text book of remote Sensing and Geographical Information Sysytem Auther - M Anji Reddy 404 A Dictionary of Construction, Surveying, and Civil Engineering (Oxford Quick Reference) Auther - Oxford 405 WELDING ENGINEERING AND TECHNOLOGY Auther - RS PARMER 406 WELDINGTECHNOLOGY AND DESIGN Auther - V RADHAKRISHNAN 407 WELDING PRINCIPLE AND PRACTICE Auther - EDWARD R BOHNART 408 WELDING ANSWER : OBJECTIVE QUESTION AND ANSWER Auther - MANOJ DOLE 409 MANUFACTURING TECHNOLOGY : FOUNDRY, FORMING & WELDING Auther - Dr. P N RAO 410 BUILDING METALLURGY AND WELDABILITY OF STAINLESS STEEL Auther - JOHN C LIPPORD 7 DAMIAN J KOTTECKI 411 NEW DEVELOPMENTS IN ADVANCE WELDINGAuther - NAHMED 412 MODERN ARC WELDING TECHNOLOGY Auther - NADKARNI SV 413 WELDING SCIENCE AND METTULARGY AND TECHNOLOGY Auther - AAMERSH BANERGEE 414 A PRACTICAL MANUAL OF AUTOGENOUS WELDING Auther - E GRANJON 415 A TEXT BOOK ON WELDING AND CUTTING METALS BY THE OXYACETYLEN PROCESS STEAL METTULARGY Auther - VULCAN PROCESS CO 416 WELDING HAND BOOK 9 TH EDITION VOL-1 Auther - AWS 417 WELDING SKILLS PROCESS AND PRACTICE FOR ENTRY LEVEL WELDERS Auther - LARRY F JUFFERS AND LAWRENCE BOWER 418 ARC WELDING OLD TIME METHOD OF METAL WORKING Auther - TONY SALVITTI 419 FABRICATION AND WELDING ENGINEERING Auther - TIMINGS 420 WELDING TECHNOLOGY Auther - GUPTA 421 MIG WELDING GUID Auther - KLAS WEMAN 7 G LINDEN 422 Automobile Engineering VOL 1 Auther - Dr Kripal singh standard Publishers Distributors 423 Automobile Engineering Vol 2 Auther - Dr Kripal singh standard Publishers Distributors 424 Mechanic Motor Vehicle theory Auther - Manish Sharma (Neelkanth publishers) 425 Mechanic Motor Vehicle Practical Auther - Manish Sharma (Neelkanth publishers) 426 Automobile Engineering Practical Auther - N Malhotra Asian Publishers 427 A Hand book for professional knowledge (Trade Theory)Mechanic Motor Vehicle Auther - ER Anoop SR New Tech Publishers 428 Automotive Mechanics Auther - S Srinivasan (MC Graw Hill Education) 429 The Automile Auther - Harbans Singh Reyat (S Chand & Company) 430 Automotive Electrical Equipments Auther - PL Kohli 431 Automobile Engineering Auther - RB Gupta 432 Motor Vehicles Act 1988, as amended upto date by The Motor Vehicles (Amendment) Act 2019 Auther - Universal Law Publishers 433 Driving Manuel (Malayalam) Auther - K S Ranaprathapan, Kerala Bhasha Institute 434 Car Driving School manuel for India Auther - Naresh Raghavan, Notion press publishers 435 Automobile Engineering(Malayalam) Auther - T M Shaji, TMS Publishers 436 Fashion design hand bood Auther - Frances Vereker 437 Embroidery Design Auther - Nirmala.C.Mistry 438 Embroidery design flowers and butterflyes Auther - Nirmala.C.Mistry 439 Design for beeds embroidery Auther - Kenneth.D.King 440 Tailoring Basics-dress design cutting and sewing Auther - Nadia Fahim 441 Embroidery stiches and technique Auther - Amazon 442 Neck Line .embroidery Auther - Sue Taylor Cox 443 Sewing school Auther - Annie Petronics 444 Simply the best sewing Auther - Amazon 445 Sewing Basics Auther - Sandra Bord well 446 High fashion sewing secrets Auther - Claire B Shaeffer 447 Complete book of sewing Auther - Amazon 448 Home tailoring course Auther -Kusum Sharma 449 Thayyal Swayam Padikkam Auther - Berlin Kadackkal 450 Thayyal Auther - J.Swarnam 451 Keraleeya Vasthra Parambariyam Auther - Dr.B.Balachandran 452 Thayyal Vinjanakosham Auther - Loosi.M.C, Roona.C 453 Thayyal entheluppam Auther - T.Raji 454 Embroidari - Kalayum Varumanavum Auther - T.Raji 455 Vasthra Nirmana Kala Auther - Sangeetha Sreevasthava 456 Thayyal Design and Dress making Auther - J.Swarnam 457 Book of Emboidery Auther - Amazon 458 A to Z of Embroidery stiches Auther - Country Bumpkhin 459 Cutting of Blouses Auther - Dilip Karampiri 460 The complete Home book of family tailoring Auther - Bonnie V Goodman 461 Designs from Indian Textiles Auther - Aparna Gwande
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Kerala View Result →
36.
Public Administrative Department #9363422 Technical Bid
Invites bidder for 1.25 MW online solar power generation for tirth kshetra parli which includes erecting, installing and commissioning of solar panels with below details and specifications and1000 lit solar water heater for tirth kshetra parli which includes erecting, installing and commissioning of solar water heaters with below details and specifications For Non SSR Rate For M C Parli V- 1 Content WritingThe creative writing scope involves the development of narrative content through a structured yet flexible process. It begins with research—supported by books, references, and site visits—and moves through data collection, selection, and consultation with a panel of relevant authorities. The aim is to ensure cultural relevance, thematic consistency, and creative integrity. A team of experienced writers, including those with a background in show and screenplay writing, will lead the storytelling process. The primary writer must have substantial experience—preferably over 15 years— and good credentials in show writing, with a proven ability to handle complex, multimedia-driven narratives. The story evolves into script and screenplay formats, including a technical timeline version to align with visual and sound elements. If musical components are included, lyrics will be written by a professional lyricist with experience in both films and live performances. Dialogue writing, idea translation, and screenplay adaptation into other languages are also part of the scope, overseen by a dedicated language supervisor to ensure linguistic clarity and cultural sensitivity. While certain elements may adapt during the creative cycle, the process will remain focused on delivering a cohesive, original, and production-ready script. The show will be bilingual.The job consists of - Data Collection, Data Selection, Authority team, Creating Ideas, Story writing, Script Draft, Screenplay, Lyric writing, Dialogue writing, Technical timeline Screenplay, Translating ideas, Translating Screenplay, Language Supervison 2 DubbingThe audio production scope includes all processes related to voice recording, dubbing, and language adaptation as required for the project. The process begins with planning and coordination under the supervision of a Creative Director, in consultation with the script and language teams. Dubbing forms the core of the audio workflow. This includes recording of voiceovers and dialogues by both celebrity artists and junior artists, as per casting decisions. Talent coordination, scheduling, and handling of logistics fall under the purview of the Artist Management team, which ensures seamless execution across sessions. All voice recordings will be carried out at a professional audio studio, equipped to handle multichannel dubbing and real-time monitoring. Sessions are overseen by an experienced Dubbing Director, responsible for voice performance quality, tone accuracy, and delivery consistency across versions. Throughout the dubbing phase, a language supervisor ensures linguistic correctness, pronunciation alignment, and translation fidelity—particularly in multilingual productions. Supporting staff, including a designated assistant, will aid in session coordination, script handling, and communication between departments. This is a bilingual project. While the structure of the recording process is generally predefined, flexibility may be exercised based on artist availability, script revisions, or project-specific creative needs. 3 The background music The background music production covers the complete creation of an original score to support the overall mood and narrative of the show. The process is led by a Music Director, assisted by a dedicated assistant, and involves contributions from a Music Arranger and music programmers who develop the structure, orchestration, and digital elements of the composition. Live elements are performed by instrument players and chorus singers, as required by the arrangement. To enhance realism and support on-screen action, foley artists are engaged for the creation of natural, synchronized effects. All music components are recorded in a professional audio recording studio, with the final mix executed in a 7.2 surround sound mixing studio to ensure high-quality, immersive output. While the structure is generally predefined, certain creative decisions may adapt during the process to meet evolving artistic and technical needs. 4 Creating songs- The music production scope for songs includes composition, arrangement, recording, and mixing of original tracks suited to the narrative and emotional context of the project. The process is led by a Music Director, responsible for the overall musical vision, supported by an assistant who coordinates sessions and logistics.A Music Arranger refines the musical structure, harmonies, and instrumentation, while music programmers handle sequencing, layering, and digital sound elements. Instrument players contribute live performances to add depth and authenticity to the arrangement. The vocal component features celebrity singers, selected for their voice quality and public resonance, supported by chorus singers where needed for harmony or scale.All vocal and instrumental recordings are conducted in a professional audio recording studio, equipped for multi-track sessions. The final output is processed and balanced in a 7.2 surround sound mixing studio, ensuring spatial clarity and production-grade sound. Adjustments may be made during the creative process to accommodate performance styles, technical feedback, or evolving project direction. 5 Audio MixingThe final audio mixing phase ensures the integration and balance of all sound elements—dialogue, music, effects—into a polished, immersive audio output. The process is creatively led by a Creative Director, who provides the overall aesthetic and emotional direction for the final sound. A designated assistant coordinates schedules, handles version tracking, and supports communication between departments to maintain workflow efficiency. The mixing is executed in a professional 7.2 surround sound studio, equipped for spatial sound design and high-fidelity output suitable for large-format or immersive playback environments. It is a bilingual Production A Technical Supervisor oversees the process, ensuring all specifications related to format, levels, and playback compatibility are met, while also maintaining quality control across multiple output versions.Final adjustments may vary depending on the nature of the content and platform-specific requirements. 6 Scope for Bilingual -The scope includes complete audio localization of the project into a second language, covering dubbing, background music, and song music production. The process begins with dubbing, involving voice recordings by native-speaking celebrity and junior artists, directed by an experienced Dubbing Director under the creative guidance of the Creative Director. Sessions are conducted in a professional audio studio, with oversight from a Language Supervisor to ensure linguistic accuracy and cultural relevance.The background music is either adapted or recreated to suit the tonal needs of the second language version. This includes re-arrangement, possible re-recording by instrument players, and adjustments led by the Music Director with support from arrangers and programmers. Where applicable, song music production is carried out in the second language, featuring celebrity singers and chorus artists, ensuring lyrical integrity and emotional alignment. Lyrics are adapted and approved by the language and creative teams to retain the original intent while fitting the new languages phonetic and rhythmic structure. All elements—dialogue, music, and effects—are finally mixed in a 7.2 surround sound studio under the supervision of a Technical Supervisor, ensuring cohesion and broadcast-ready quality. Some creative or technical modifications may be made based on language-specific needs or audience expectations. 7 Indoor ShootingThe indoor studio shoot covers all aspects of video production carried out within a controlled studio environment, under the overall vision of the Creative Director. The shoot is planned and executed with the support of a technical supervisor, assistant, and a full production team, ensuring that both creative and logistical aspects are effectively managed.The cast includes celebrity artists and junior artists, whose schedules and coordination are handled by the artist management team. Performance delivery is supported with tools such as a teleprompter and direction provided on set. The production takes place in a professional video studio using high-grade camera equipment, with visuals led by a skilled Director of Photography (DOP). The setup includes a full lighting rig, supplemented by a generator for uninterrupted power supply. For shoots requiring virtual backgrounds or visual integration, chroma key technology is used. Supporting elements include on-location sound setup, makeup, costumes, and props, all arranged to maintain visual consistency with the creative concept. The location and studio logistics are prepared in advance, ensuring readiness for smooth execution. While most elements follow a predefined structure, flexibility is maintained for creative changes, technical adjustments, or talent-related considerations during the shoot. 8 Outdoor ShootingThe outdoor location shoot involves the execution of video production in open, uncontrolled environments, led creatively by a Creative Director and technically coordinated by a Technical Supervisor with support from an Assistant and a full Production Team. This setup ensures both the creative vision and the operational logistics are effectively managed on site.Camera equipment and on-location filming are handled by an experienced Director of Photography (DOP), supported by a custom lighting setup and reliable power supply through generators. The presence of junior artists, along with complete makeup, costumes, and props, helps bring the narrative elements to life during the shoot. To capture wide and aerial perspectives, a drone camera is operated by a trained drone operator, enabling cinematic coverage of the location. On-site sound setup ensures proper dialogue and ambient recording despite outdoor challenges. Comprehensive logistical support is included, covering crew transport, food, and accommodation, ensuring the teams comfort and efficiency during extended schedules. Outdoor management costs account for location permissions, crowd control, weather-related support, and other unforeseen field requirements. While the shoot is planned in detail, flexibility is maintained to adapt to on-site conditions, natural light changes, or last-minute creative directions. 9 Editing The editing phase involves assembling, refining, and finalizing the visual and audio content using professional software platforms such as FCP or Premiere. The process is led by a skilled Editor, working under the creative guidance of the Creative Director, and supported by an Assistant for logistical and coordination tasks. A Technical Supervisor ensures compatibility across formats and monitors workflow consistency. The edit includes detailed color correction and DI (Digital Intermediate) processing to ensure visual consistency, mood enhancement, and output readiness for multiple formats.Simultaneously, sound matching is carried out to align the audio precisely with visual elements, ensuring a seamless viewing experience. While the process follows an established structure, creative and technical adjustments may be made during post-production based on evolving requirement. 10 The concept development The concept development stage lays the foundation for the animation project by defining the core theme, narrative, or message to be communicated through the visual content. This includes interpreting the shows objective and aligning it with the desired emotional, cultural, or historical tone.A clear understanding of the events context—its purpose, audience, location, and scale—is essential at this stage. This helps shape the visual language, pacing, and symbolic elements of the animation. In parallel, the creative team gathers necessary architectural references, including blueprints, elevations, or high-resolution photographs of the projection surface—such as a building façade, monument, or custom structure. These assets are critical for mapping visual content accurately and ensuring that the animation interacts naturally with the physical form of the structure. This stage may involve creative exploration, mood boarding, and draft scripting, with room for refinement based on client input or site-specific constraints. 11 The projection surface analysisThe projection surface analysis phase focuses on the detailed study of the building or structure intended for projection. This includes analyzing its dimensions, contours, architectural features, and physical obstacles such as balconies, columns, or surface irregularities that may impact visual output.Based on this analysis, the team develops a precise 3D model or high-fidelity mock-up of the actual building or façade. This model serves as the reference framework for animation alignment, ensuring that visuals map seamlessly onto the surface and interact accurately with its physical geometry. This step is essential for delivering a high-impact, distortion-free projection experience. 12 The Storyboard & Visual ScriptingThe Storyboard & Visual Scripting phase involves planning the sequence of visuals, defining key scenes, transitions, and impactful moments that shape the overall flow of the animation. This step establishes the visual rhythm and narrative structure of the show. A detailed visual script is developed alongside the storyboard, mapping out how each visual element aligns with music, voiceover, or narration, if applicable. This ensures creative cohesion between the audio and visual components, serving as a blueprint for the animation and production teams during the execution phase.The Asset Creation phase The Asset Creation phase focuses on designing and developing all visual elements required for the animation. This includes creating characters, environments, and props using industry-standard 3D software such as Blender, Maya, or Cinema 4D, depending on project needs. In addition to modeling, the team creates or sources textures, lighting references, and visual effects that enhance the realism or stylistic tone of the animation. These assets form the visual foundation of the project and are tailored to suit the projection surface, storytelling requirements, and overall design direction.The 3D Animation & SimulationThe 3D Animation & Simulation phase involves animating visual elements in precise synchronization with the storyboard and audio, including music, narration, or sound design. This ensures that the visuals follow the intended rhythm and narrative structure. The process includes the addition of dynamic visual effects such as explosions, transformations, morphing, and architectural illusions to enhance the visual experience and create dramatic impact. To complement the content and surface geometry, camera movements and spatial transitions are simulated within the 3D environment, ensuring smooth visual flow and accurate alignment with the unique structure of the projection facade. 13 The RenderingThe Rendering phase involves generating the final animated output in high resolution (typically 4K or higher) to meet the technical requirements of the projection system. This step ensures that all visual elements are produced with maximum clarity and detail.Special attention is given to color accuracy, brightness, and contrast levels, The Audio Synchronization The Audio Synchronization phase involves the mixing of background music, voiceovers, and sound effects (SFX) into a cohesive audio track. This mix is carefully aligned with the visual timeline to ensure seamless integration.Key sound cues are timed precisely with visual events to enhance dramatic impact and emotional engagement. The synchronization process ensures that audio elements not only support but elevate the overall viewing experience.Calibration -The Projection Mapping & Calibration phase focuses on aligning the final animation with the architectural surface using specialized software such as MadMapper, Resolume Arena, or HeavyM. This step ensures that the visual content fits precisely to the buildings structure and features.On-site testing is conducted using actual projectors to fine-tune the mapping. The Final Testing The Final Testing & Show Execution phase involves conducting full-scale tests of the complete animation and audio sequence under actual or simulated show conditions, typically at night to match final lighting environments. This ensures accurate visual impact and technical performance. During testing, the team performs final adjustments to fine-tune synchronization, alignment, and timing across projection, sound, and control systems. All critical elements—transitions, cues, and effects—are reviewed for precision.Comprehensive backup systems are prepared, and the triggering mechanism for the show is tested for seamless execution and reliability, ensuring a smooth and uninterrupted live experience. 14 Concept & Theme DevelopmentThis stage involves identifying the purpose of the show—such as entertainment, branding, or cultural celebration. It includes defining the narrative structure, key visual highlights, and emotional peaks. Visual elements will be carefully aligned with music, narration, or other media components to create a cohesive and engaging experience. 15 Site Analysis & Safety PlanningSite Analysis & Safety PlanningIncludes a detailed survey of the venue to assess dimensions, audience layout, and whether the space is indoor or outdoor. Identifies laser-safe zones and ensures compliance with relevant safety standards. Plans for environmental factors such as wind, dust, reflective surfaces, and addresses power supply and equipment placement needs.Storyboard & Laser DesignInvolves creating a detailed show flow with defined cues for anim+B27ations, effects, and transitions. Includes the design of laser scenes incorporating elements such as text, logos, line art, tunnels, waveforms, and abstract visuals to match the overall narrative and theme.Audio IntegrationInvolves selecting or composing a soundtrack that enhances the laser visuals. Visuals are precisely synchronized to musical beats and cues using timeline-based software to ensure a cohesive and impactful audiovisual experience. 16 Programming the Laser ShowUtilizes specialized software (e.g., Pangolin Beyond, Laser Show Designer, LSX) to design and animate laser graphics. Involves programming scene cues with precise timing, color modulation, and optimizing vector paths to reduce flicker and ensure clean, stable laser projections.Equipment SetupInvolves integration of the control system using a laptop, DMX interface, or timecode-based triggering setup to ensure reliable playback and synchronization of laser and show elements.Show ExecutionInvolves synchronizing the laser show with other elements such as music, lighting, and pyrotechnics. Cues are triggered manually or through automated systems using timecode or MIDI. Real-time monitoring is performed to ensure system performance and maintain audience safety. 17 Objective & Concept DevelopmentDefines the purpose of the lighting design—whether for concerts, architectural highlights, theatrical performances, or event ambiance. Focuses on understanding the emotional tone, thematic direction, and desired audience impact. A creative lighting concept is developed to support the narrative, brand identity, or spatial transformation goals.Venue Analysis & Technical SurveyInvolves assessing the venues dimensions, architectural features, and ambient lighting conditions. Identifies available power sources, rigging points, and spatial limitations such as stage size and ceiling height. A 3D model or detailed layout is created or requested to aid in accurate previsualization and planning.Mood Board & Visual ReferencesCurates visual references for color schemes, lighting styles, fixture types, and integration with stage or set design. A mood board is developed to reflect the artistic direction and align with the client’s brief and creative vision.Lighting Plot & Fixture PlanningInvolves selecting suitable light fixtures such as washes, spots, beams, strobes, LED bars, and moving heads. Plans fixture positions and focus angles on a detailed lighting plot. Assigns control channels, fixture groups, and zoning to ensure efficient programming and operation. 18 Programming & Cue DesignUtilizes professional lighting control software (e.g., GrandMA, Chamsys, Avolites) to program show cues. Lighting sequences are synchronized with music, movement, or stage actions. Includes design of layered transitions such as dimming, color changes, fades, strobes, and dynamic fixture movements.Previsualization & RenderingSimulates the lighting design in 3D environments using tools such as Capture, WYSIWYG, or Depence². Provides rendered images or video previews to the client and production team for review, feedback, and approval prior to on-site setup.On-site Setup & RiggingInvolves coordination with the technical crew to install lighting fixtures, cabling, and rigging infrastructure. Includes focusing lights and adjusting beam angles, sizes, and positions. All units are tested for power, DMX signal integrity, and proper alignment.Rehearsals & Final ProgrammingConducts full run-throughs with live sound, performers, or projected content to validate timing and coordination. Adjusts cue timings, fade curves, and brightness levels based on actual venue conditions. Finalizes and programs the cue stack for show triggering via manual control, timecode, or live operation. 19 Show Planning & Cue BreakdownDefines all technical and creative elements involved in the show, including lighting, video projection, lasers, sound, pyrotechnics, and moving set pieces. Breaks the show into cue points based on timeline, music, or script structure. Timeline & Control System SelectionDetermines the central control method for the show—timecode-based, cue-stack driven, or a hybrid of manual and automated triggers. Selects appropriate software and hardware solutions (e.g., QLab, Timecode Buddy, Watchout, Medialon, Disguise, TouchDesigner, Hippotizer, MADRIX, Reaper). Defines communication protocols such as MIDI, DMX, OSC, TCP/IP, or Art-Net for seamless integration between devices.System Integration & Communication SetupEnsures all show systems—including lighting, video, audio, and mechanical elements—are networked and properly addressable. Sets up protocol routing, such as MIDI triggers for video playback or SMPTE timecode for synchronizing lighting and audio cues. Configures master/slave relationships to establish a reliable sync hierarchy, typically with audio as the master clock. 20 Programming Cue SequencesDevelops a detailed cue list within the control software, assigning precise timings and smooth transitions for each element. Triggers are programmed to execute specific actionsPrevisualization & TestingUses specialized software (e.g., Disguise for video, Capture for lighting, TouchDesigner for interactive elements) to s+B48imulate the full cue stack in a virtual environment. Enables fine-tuning of transitions, timing, and synchronization across systems before on-site setup, helping to identify and resolve potential issues in advance.Rehearsal & On-Site CalibrationConducts full rehearsals using actual show hardware including lighting rigs, projectors, audio systems, and stage mechanics. Fine-tunes cue timings, fade curves, and mechanical movements to match music or video beats. Tests all failsafes, aligns system triggers, and ensures timecode sources are synced with acceptable playback latency across all systems. 21 Digital signal processor - 12 x 8 Networked Digital Signal Processor with 12 inputs and 8 outputs or more; 12 ormore Control Inputs and 6 or more Logic Outputs for GPIO Integration; 48V phantom power on all analog inputs; THD: <0.01% 20Hz to 20KHz; Crosstalk: <-75dB orbetter; Open architecture software configurable; logic processing power; 2 digital audio bus RJ45 Port; 1Ethernet RJ45 port for Monitoring and configuration; Capable to handle +5V unloaded logic output voltage; Should have speech sense engine; Capable to control 3rd party devices with TCP IP and RS232; Should have 1nos of RS 232 port for integration with control System; Should have Bi-Directional Locate Functionality; Should have 48 or more digital audio Channel Bus; Should have monitoring LED for COM, STAT, ERR and PWR; etc.Approved Make: BSS / bi-amp / Symetrix 22 Wall Mount Controller - 8 Buttons Ethernet Controller and Volume Control, Should be Compatible with supplied DSP, Should support PoE (Power Over Ethernet), 8 Programmable Buttons (Multicolored), Capable to trigger any DSP logic, Multicolored 2 Programmable 64x128 Pixel LCDs, Sleep Function, Security: Remote Lock/Unlock and Local Unlock via PIN Entry, Should have knob and capable to control 8 zones separate.Approved Make: BSS / bi-amp / Symetrix 23 Wall mount arrayable speaker.High Power 3-Way Loudspeaker with 15 LF; Frequency Response:(±3 dB): 45 Hz – 18 kHz, Frequency Range (-10dB):38Hz – 20KHz; Coverage Pattern: 90° x 50°, rotatable waveguide, Crossover Modes: Tri-amp/Bi-amp switchable, Transducer Power Rating :LF 4000 W peak , MF 1400 W peak ,HF 400 W peak, LF Driver : 15”; MF Driver : 8” ; HF Driver : 1.5”; Sensitivity LF : 97dB; Sensitivity MF: 108dB; Sensitivity HF: 115dB;Maximum SPL: LF:133 dB peak , MF/HF: 139 dB peak, ; Nominal Impedance: 8 ohms, Grille: Powder coated 14 gauge perforated steel, Enclosure: Trapezoidal with 15 degree side angles.Approved Make: JBL / L-acoustic / d&b audiotechnik 24 Weathrised SpeakerHigh Power 3-Way Loudspeaker with 15 LF; Frequency Response:(±3 dB): 45 Hz – 18 kHz, Frequency Range (-10dB):38Hz – 20KHz; Coverage Pattern: 90° x 50°, rotatable waveguide, Crossover Modes: Tri-amp/Bi-amp switchable, Transducer Power Rating :LF 4000 W peak , MF 1400 W peak ,HF 400 W peak, LF Driver : 15”; MF Driver : 8” ; HF Driver : 1.5”; Sensitivity LF : 97dB; Sensitivity MF: 108dB; Sensitivity HF: 115dB;Maximum SPL: LF:133 dB peak , MF/HF: 139 dB peak, ; Nominal Impedance: 8 ohms, Grille: Powder coated 14 gauge perforated steel, Enclosure: Trapezoidal with 15 degree side angles.Approved Make: JBL / L-acoustic / d&b audiotechnik 25 Subwooferhighpower install grade Dual 18 low frequency loudspeaker systemwith extended frequency range with mounting points for OEM hardware/ bracket. Frequency response: 20Hz to 1KHz (-10 dB) or better, Power rating: 2400W continuous or better; Sensitivity: 99dB or better; Maximum SPL: 135dB or better; Nominal Impedance: 4ohm in parallel and 2X8 ohm in driver mode; LF Driver 18 or better; LFdriver with 4 voice coil.Approved Make: JBL / L-acoustic / d&b audiotechnik 26 Digital Power AmplifierFour channel Digital Network Based Power Amplifier with Power output 4 x 2400W @ 4 Ohms / 8 Ohms; should support 70Vrms and 100Vrms output on all output channels; THD 0.35% or better; Should support Cooling Continuously variable speed forced air; Voltage Gain 34dB or more; Digital bus compatibility up to 8 or more audio channel; bridgeable channels - even in 100Vrms mode for 200Vrms Output; 2digital audio bus RJ45 port; 1 Ethernet R 45 port for monitoring and configuration;Should have DSP features incl. Limiters , Input/output EQ ,Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor (20 Hz to 100 Hz) : >5000 or more; etc.Approved make: Crown / RAM Audio / Labgrupen 27 Digital Power AmplifierMultichannel Digital Network Based Power Amplifier with Power output 4 x 1250W or better @ 4 Ohms / 8 Ohms; Should support 70Vrms and 100Vrms output on all output channels; THD 0.35% orbetter; Cooling Continuously variable speed forced air; Voltage Gain 34dB ormore; Digital bus compatibility up to 8 or more audio channel; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters , Input/output EQ , Delay ,Matrix Mixer ,Speaker Line Monitoring; Damping Factor (20Hz to 100Hz) : >1500 ormore; etc.Approved make: Crown / RAM Audio / Labgrupen 28 Digital Power AmplifierMultichannel Digital Network Based Power Amplifier with Power output 4 x 600W @ 4 Ohms / 8 Ohms or better; Should support 70Vrms and 100Vrms output on all four channels; Frequency Response: ±0.25dB or better; Total Harmonic Distortion: 0.35% or better; Voltage Gain: 34dB or better; Damping Factor(20Hz to100Hz): >1000 or better; Signal to Noise Ratio: >108dB or better; Cooling: Continuously variable speed forced air, front to back airflow; bridgeable channels even in 100Vrms mode to operate with 200Vrms output; 2digital audio bus RJ 45 port; 1 Ethernet R 45 port for monitoring and configuration; Should have DSP features like Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring.Approved make: Crown / RAM Audio / Labgrupen 29 Digital Power AmplifierMultichannel Digital Network Based Power Amplifier with Power output 8 x 300W @ 4 Ohms / 8 Ohms or better; Should support 70Vrms and 100Vrms output on all Eight channels; THD 0.35% or better; Damping Factor (20 Hz to 100 Hz): >1000 or better; Frequency Response: ±0.25dB or better; Signal to Noise Ratio: >108dB or better;Cooling: Continuously variable speed forced air, front to back airflow; Voltage Gain: 34dB or better; Audio Digital channel bus compatibility up to 8 channel, bridgeable channels - even in 100Vrms mode, 2 digital audio bus RJ 45 port, 1 Ethernet R 45 port for monitoring and configuration, Should have Limiters, Input/output EQ, Delay, Matrix Mixer, Speaker Line Monitoring.Approved make: Crown / RAM Audio / Labgrupen 30 Stage Monitors 1 x 12 LF; 2-Way Stage Monitor Speaker System; Power Rating 300W at 8 Ohms; etc.Approved Make: JBL / L-acoustic / d&b audiotechnik 31 2.5 sq mm multi stranded speaker cable 32 1.5 sq mm copper multi strandedcable 33 2 core shielded 23/36 cable 34 XLR connector 35 Speak on male and female connector 36 Jack Pins 37 RC Pins 38 EP pins 39 18U audio RackBrand - ‎RIVECO / Manufacturer - ‎RIVECO / Model - ‎OF5518 / Model Name - ‎OF / Product Dimensions ‎55.12 x 50.04 x 90.17 cm; 12.25 kg / Item model number ‎OF5518 / Compatible Devices - ‎Server / Material- ‎Alloy Steel / Manufacturer - ‎RIVECO Item Weight- ‎12 kg 200 g 40 Analog Mixer – 10-channel mixing console with 4 mono mic/line inputs featuring D-PRE Class-A preamps, +48V phantom power, one-knob compressors, 3-band EQ, high-pass filters, and 3 stereo line inputs; integrated SPX digital multi-effects processor with 24 presets; built-in 24-bit/192kHz USB audio interface (2-in/2-out); balanced XLR and TRS main outputs, monitor out, FX send, and headphone output; rugged metal chassis (244 x 71 x 294 mm, approx. 2.1 kg); includes external PA-10 power supply. Suitable for professional live sound and studio recording applications.Approved Make - Yamaha, Mackie, Beheringer 41 Microphone (with cable) – Dynamic cardioid vocal microphone designed for professional live vocals and studio use, featuring a tailored frequency response of 50 Hz to 15 kHz for clear vocals and speech, uniform cardioid pickup pattern for excellent off-axis rejection, pneumatic shock mount system to reduce handling noise, built-in spherical wind and pop filter, rugged steel mesh grille, and durable metal construction; output impedance of 150 ohms, sensitivity of –54.5 dBV/Pa (1.85 mV), and XLR 3-pin connector.reliable, clarity, and stage durability.Approved Make - Shure, Sennheiser 42 Microphone Stand – Heavy-duty, adjustable-height microphone stand with tripod base or round base options, suitable for studio and stage use; features height adjustment clutch, extendable boom arm (where applicable), and standard 5/8 mic thread mount. Recommended brands: K&M (König & Meyer), Hercules, QuikLok, Samson, and Maplin. Ensure compatibility with dynamic and condenser microphones for versatile application 43 Installation, Testing & Commissioning of Sound System – Involves installation of speakers, mixers, amplifiers, processors, microphones, and cabling as per design; proper mounting, wiring, and termination with safety and signal integrity checks; system calibration including level setting, equalization, and time alignment; verification of all input/output signal paths; integration with AV or control systems if required; conducting performance tests to ensure clarity and coverage; final tuning, user orientation, and handover of a fully functional audio system. 44 Image - brightness (lumens) - • 17,800 ISO /15,000 ANSI • 23,750 ISO /20,000 ANSI color wheel• 4 segment – 3X speedDisplay technology - type - 1 x 0.8 HEP DMDresolution - WUXGA • 1920 x 1200 (2,304,000 pixels) (16:10)Illumination - type - High efficiency blue laser phosphor / performance, 20,000 hours to 50% brightness at full power mode, 50,000 hours to 50% brightness at ECO1 modeSignal Inputs - standard - HDMI 2.0b x 2 (HDCP 1.4/2.2) • 3G-SDI x 1 (BNC) -Display Port x 1(1.2a) • USB 2.0 x 1 (Type A) • HDBaseT - 1.0 (RJ45) x 1signals - Horizontal and vertical scaling while maintaining aspect ratio (all inputs)3D-Active shuttered - HDMI 1.4, HDBaseT – frame packing, top/bottom, side-by-side at 1080p at 60Hz frame sequential WUXGA(RB) up to 120 Hz. - 3D sync in (BNC) – for genlocking 45 projectors - 3D sync out (BNC) – for genlocking projectors, or controlling emitter or polarizerpixel clock - 600MHzscan rates - Horizontal: 15.375 kHz ~ 135.0 kHz ; Vertical: 23.98 Hz ~ 120 Hz -Signal Outputs monitor out (loop-through) - 3G-SDI x 1 (BNC) • HDMI x 1 (HDMI out)Control and networking -HDBaseT (RJ45 x 1) /RJ45 x 1 (Ethernet Control over wired network connection) / RS232 x 1 / Remote in: 3.5mm stereo female (provides serial communications and power) / DC JACK 12 VDC, 200 mA maxTAA-compliant - Yes 46 Lenses - mount type - Boresight adjustable - Motorized horizontal and vertical lens offset (memory available) / Motorized zoom and focus adjustment (memory available for full ILS lenses)lens options - 0.46:1 UST lens - • 1.8-2.4:1 zoom lens • 2.4-4.8:1 zoom lens • 4.8-8.64:1 zoom lens • 8.64-12.96 zoom lensAccessories - standard - IR remote with wired remote jack (wire not included) • AC line cord for projector • Product Safety Guide 47 Installation testing and comminssioning -Includes unloading, positioning, and secure rigging or ceiling/truss mounting of high-lumen projectors as per projection plan; connection of power supply, signal inputs (HDMI, SDI, DVI, DisplayPort, or HDBaseT), and control interfaces (LAN, RS232, or remote protocols); alignment of projectors with screen surfaces or projection areas using lens shift, zoom, and keystone adjustments; implementation of edge blending, warping, and soft/hard masking where multiple projectors are used; calibration for brightness, color uniformity, and geometry using test patterns or software tools; full testing for input responsiveness, synchronization with lighting/audio cues, and heat management; integration with media servers, automation or timecode systems; final run-throughs and commissioning for stable operation and visual consistency during the show. 48 The PAR 180 RGBW IP is a powerhouse in the realm of LED lighting. Boasting 54X3W RGBW LEDs, it offers a vibrant array of colors with precision. Constructed with robust die-cast aluminum housing and an efficient heat sink, it ensures durability and minimal power consumption. Its slim profile accommodates five lens angle options, providing flexibility for various lighting applications. Whether for professional setups or outdoor events, this PAR delivers reliability and versatility in every illumination.Voltage - AC115-230V, 50/60 Hz / Power120W / Lamp source 54X3W RGBW 6000K Life / Color temperature / time 80000h / Lens angle15/25/20/45/60 ° / Channel 4/8 CH / Control mode DMX512, master-slave, auto, sound control / IP Rating IP65 / Net Weight 5.5 KG / Gross Weight 12.6 KG (Cardboard packing 2in1) / Package 60 X 30 X 33 CM (Cardboard packing 2in1) 49 Moving Heads - Rainbow 300:- Model No. :-11001001 Lamp Type :- Philips MSD 250W / Osram HRI 251W ,Average Life :- 1500 hours ,Color Temperature :- 7800K / 7890K ,Reflector :- Lamp and reflector combined in one unit ,Lens :- High-precision optical lens ,Beam Angle :- 0°–4° ,Color Wheel :- 13 Color Filters + Open ,Effects :- Rainbow effect can be created ,Gobos :- 12 Fixed Gobos + 4 Glass Gobos + Open ,Effects :- Shake effect,Frost Effect :-Independent frost soft effect,Dimming :- Mechanical linear 0–100% dimming ,Strobe Effects :-Fast strobe, pulse / asynchronous / synchronous / random speed ,Prism Wheels :- 3 Total: • 1 x 8+8+8 Honeycomb Prism (Self-rotating) ,• 1 x 8 Circular Prism (Self-rotating) ,• 1 x 8+16 Facet Circular Prism ,Optional Prism :-6 Facet Linear Prism,Total Prism Effects :- 7 ,Pan Range :- 540°,Tilt Range :-270° ,Reset System :-Electro-optic auto-reset system ,Control Channels :- 16CH / 20CH ,Control Modes :-DMX512, RDM (Optional), Auto Run, Sound ,Addressing Option :-Type-C Socket (Powerbank compatible) ,Menu Display :-LCD with 16 million pixels, 180° rotatable,Fan Control :- Intelligent fan control ,Sensor Detection :- Electronic sensor detection ,DMX Monitoring :- DMX control monitor,Motor Drive :- X/Y Two-phase motor drive,LCD Features :- Parameter query available 50 Moving Heads - Rainbow 600 (Wall washer) ,Model No. :-11001021 ,Lamp Type ,OSRAM HRI 420W / Philips MSD 420W ,Average Life :- 2500 hours ,Color Temperature :- 7600K / 8000K .Reflector :- Lamp and reflector combined in one unit , Lens :- High precision optical lens ,Beam Angle :-2.8° ,Color Wheel :-14 Color Filters + Open,Effects :- Rainbow color effect ,Gobos:- 12 Fixed Gobos + 4 Glass Gobos + Open ,Effects :-Shake effect,Frost Effect :-Independent frost soft effect ,Dimming:- Mechanical linear 0–100% dimming ,Strobe Effects :-Fast strobe, pulse / asynchronous / synchronous / random speed ,Prism Wheels :-2 Total: :-• 1 x 8+8+8 Honeycomb Prism (Self-rotating) ,• 1 x 8 Facet Circular Prism (Self-rotating) ,Total Prism Effects:- 3,Pan Range :- 540° ,Tilt Range :- 270° ,Reset System :- Electro-optic auto-reset system,Control Channels :- 16CH / 20CH ,Control Modes :-DMX512, RDM (Optional), Auto Run, Sound ,Addressing Option :- Type-C Socket (Powerbank compatible),Menu Display :-LCD with 16 million pixels, 180° rotatable,Voltage :- AC100-240V 50/60Hz,Ballast :- Electronic ballast ,Power Consumption :- 600W,Clamp Type:-Inbuilt folding clamp ,Product Dimensions :-38 x 32 x 66 CM,Net Weight :-20KG,Flight Case Packaging (2 in 1):-78.5 x 46 x 89.5 CM ,Gross Weight :-60KG 51 DMX Spliter 8C :- Take control of your lighting rig with the DMX SPLITTER 8CH 2 IN1. Amplify your DMX signal to four independent outputs, providing greater fixture control and scalability for large-scale events and intricate lighting designs. With impeccable signal integrity and flexible configurations, this splitter is the perfect choice for demanding outdoor environments, touring artists, and rental companies seeking reliable performance and stability.Power input :- AC120V-240V 50Hz/60Hz ,Consumption :-20W ,Net Weight :- 2.4 KG,Gross Weight :- 14 KG ,Cardboard packing :- (5in1),Package :- 51X24X48 CM 52 Haze :-DFZ-2100 is a top of the range water-based haze machine designed for the professional market. It has strengthened its performance than its predecessor, comes built-in flight case and can be stacked one on another. DFZ-2100 haze machine features a unique heating system which enables to produce continuous even haze, free from clogging, reduce maintenance and extend product life. Operating at low noise levels makes it an ideal choice for noise-sensitive environments, including theaters, stages, studios and high-end bars.,Power :-1200W ,Voltage:- AC220V-240V/50-60Hz .Warm-up time :- Appr. 2 Min,Fuel consumption :-83 Min/L ,Tank capacity:- :-5 ltr. ,Max output volume:- 12000 cuft / Min,DMX Channel :-2,DISPLAY :-LCD-2,Net Weight :- 14 KG , Gross Weight ,16 KG ,P Dimensions :- 51×39×26.5 CM ,C Dimensions:- 59×47.5×33.5 CM 53 Cables:- 2.5 sq mm cable 54 Connectors -Includes supply and installation of professional-grade connectors for stage lighting such as XLR (3-pin/5-pin) for DMX signal, PowerCON and True1 for secure power connections, and EtherCON for network-based lighting protocols like Art-Net or sACN; all connectors to be heavy-duty, locking type, and suitable for touring or fixed installations, ensuring reliable signal transmission, power safety, and system durability; recommended brands include Neutrik, Amphenol, and Seetronic. 55 Poweboard -Custom-designed power distribution board for stage lighting, equipped with industrial-grade MCBs, RCBOs, power indicators, and socket outlets (16A/32A/63A as required); includes multiple protected outputs for connecting lighting fixtures and dimmers, with proper earthing, load balancing, and surge protection; housed in a rugged enclosure suitable for indoor/outdoor use; ensures safe and reliable power supply for all stage lighting equipment; recommended components from brands like Legrand, Schneider Electric, or L&T. 56 Installation - Involves mounting and rigging of lighting fixtures (LEDs, movers, PARs, etc.) on trusses or grids, routing and termination of power and DMX/control cables, addressing and patching of fixtures, integration with lighting console via DMX or Art-Net, testing for power, control signal, and fixture functionality; includes alignment, focusing, and basic programming as per show design; all work to comply with safety standards and rigging best practices. 57 lamp power:- 40W,Laser power :-Red:10000mw Green:15000mw Blue:16000mw ,Power consumption :-760W,Wavelength :-Red:638mw Green:525mwBlue:450mw,Laser source :- Diode(NICHIA) ,Colors :- RGB full color ,External Modulation :-100K Analog, TTL,DMX Channel :- 19CH/32CH,Scanner system :- 50kpps☑,Laser source :- Diode(NICHIA),Colors :-RGB full color, External Modulation :- 100K Analog☑ TTL☑,DMX Channel :-19CH/32CH,Scanner system :- 50kpps 58 Timecode reader for Laser Show – Device used to read and decode SMPTE/LTC timecode signals for precise synchronization of laser projections with audio, lighting, and video cues; ensures frame-accurate playback and seamless integration with laser control software; supports industry-standard timecode formats, offers stable input detection, and is compatible with show controllers and timeline-based systems. Recommended brands -Pangolin, LaserAnimation Sollinger, and Showtacle 59 License Key for Laser Show Software – Official software authorization key required to unlock full features of professional laser show control applications such as Pangolin QuickShow, BEYOND, or Showtacle Moncha.NET; enables access to advanced timeline programming, multi-laser control, DMX/Art-Net integration, 3D animation tools, and real-time synchronization with audio, video, and lighting systems; delivered as a hardware dongle or digital activation key. Essential for legal use and operation in professional multimedia and laser show productions. 60 InstallationIncludes mounting and alignment of laser projectors at designated locations, secure rigging with safety measures, routing and termination of power, signal, and control cables, integration with control systems (DMX/Art-Net/ILDA), installation of safety interlocks and emergency stop switches, basic lens and beam path alignment, and ensuring compliance with safety standards; system tested for alignment, coverage, and synchronization with multimedia content before handover. 61 Server :- Operating System -Windows 10 or Windows 11 (64-bit), macOS 10.15 (Catalina) or later,Processor- Recommended: Intel Core i7 or AMD Ryzen 7, Minimum: Intel Core i5 or AMD Ryzen 5 :- Recommended: Intel Core i7 or AMD Ryzen 7, Minimum: Intel Core i5 or AMD Ryzen 5,Recommended: 16 GB or more, Minimum: 8 GB.Graphics Card :- Recommended: NVIDIA GeForce RTX 4060 with 6 GB VRAM, Minimum: NVIDIA GeForce GTX 960 with 2 GB VRAM,Storage:- Recommended: SSD with 10 GB free, Minimum: 5 GB free space ,Video Inputs :-HDMI x 2 (HDCP 2.2 compliant), DisplayPort x 1 (version 1.2), DVI-D x 1 (digital only), USB x 1 (Type A),Video Outputs :- HDMI x 1, 3G-SDI x 1 (BNC),Optional Video Inputs :- HDBaseT (RJ45 x 1), Terra SDVoE, 3G-SDI x 1 IN (BNC), 3G-SDI x 1 OUT (BNC), WiFi Dongle,Audio Outputs :- Stereo output via 3.5mm jack or HDMI,Networking:- Ethernet (10/100/1000 Mbps), WiFi (optional) ,Resolution Support :- Max: 4096 x 2160 @ 60Hz, Min: 480i @ 60Hz,Frame Rate Support :- Horizontal: 15-91 kHz, Vertical: 24-120 Hz,Pixel Clock :- Max: 594 Mpix/s (supports high resolutions and refresh rates),3D and HFR Support :- 3D Formats: Frame packed, top/bottom, side-by-side (up to 120Hz), Optional Input: Up to 1920 x 1080 @ 120Hz,Control Interfaces :- RS-232, MIDI/OSC, Web Interface,Networking and Remote Control :- Ethernet (10/100/1000 Mbps), WiFi (optional) ,Warping and Blending :- Built-in warping and blending, compatible with external video processors and controllers,Standard Accessories :- Power cable, manuals,Optional Accessories :- External control interfaces, additional storage ,Operating Voltage :- 100-240 VAC @ 50/60Hz ,Power Consumption :- Max: ~250-500W (varies by configuration) Power Management :-Various power-saving modes available, Operating Temperature :- 50-95°F (10-35°C),Operating Humidity :- 10-80% non-condensing, Warranty :-1-3 years parts and labor (varies by manufacturer and region), extended support available :-24/7 support available from manufacturer or authorized dealers 62 Laptop :- Hard Disk Size 512 GB, CPU Model Intel Core i7,Processor: 13th Generation Intel Core i7 1255U Up To 4.7GHz ,Operating System: Pre-loaded Windows 11 | ,Laptop, Power Adapter and User Guide,Display: 38cm 16:10 FHD (1920x1080), 60Hz 45%NTSC IPS-Level,Memory & Storage: 8GBx2 DDR5 Onboard Dual Channel RAM | Storage: 512GB NVMe PCIe Gen3x4 SSD,Intel Iris Xe Graphics | 802.11 ax Wi-Fi 6 + Bluetooth v5.2 63 DeskTop - High-performance desktop workstation comprising AMD Ryzen 9 7900 processor, compatible ATX motherboard with PCIe 5.0 support, 32GB DDR5 RAM (2x16GB, 6000MHz), 1TB NVMe Gen4 SSD (Samsung 980 Pro or equivalent), NVIDIA RTX 4060 Ti 8GB GPU, 750W 80+ Gold certified power supply, mid-tower cabinet with efficient airflow and acoustic insulation, 240mm liquid CPU cooler, 27” QHD IPS monitor with 99% sRGB coverage (Dell UltraSharp or equivalent), professional-grade audio interface (Focusrite Scarlett 2i2 or equivalent), and Windows 11 Pro OS. All components to be compatible for seamless performance in professional audio-video editing, mixing, 3D rendering, and multimedia production workflows. 64 Automation console - watchout :- Multi-display and multi-resolution support , · Timeline-based show creation,· Real-time show control via TCP/IP,· Live video input (NDI®, SDI, HDMI, capture cards),· Audio playback and synchronization,· External control via MIDI, Art-Net, DMX, and other protocols,· Support for image sequences (e.g., PNG, TIFF), videos (H.264, HAP, ProRes, etc.),· Automation and scripting support,· Support for 4K/8K+ playback (hardware dependent),· Geometry correction and soft-edge blending,· Output synchronization across multiple display servers 65 External Hard disks :- Brand - ‎LaCie / Manufacturer - ‎Lacie, Seagate, Series - ‎D2 Professional / Form Factor - ‎3.5-inch / Item model number - ‎STHA8000800 / Hard Drive Size - ‎8 TB / Hard Disk Description - ‎Mechanical Hard Disk / Hard Drive Interface -‎USB 3.0 / Hard Disk Rotational Speed - ‎7200 RPM/ Hardware Platform - ‎PC, Mac / Operating System‎mac os / Included Components - ‎LaCie® d2 Professional; USB-C (USB 3.1 10 Gb/s) cable; External power supply; Quick Installation Guide; Rescue Data Recovery Services4 / Manufacturer - ‎Lacie 66 Weatherproof canopies for projectors and speakers -Supply, fabrication, and installation of custom-designed weatherproof canopies for outdoor projectors and speakers, constructed using powder-coated mild steel, stainless steel, or aluminum with UV-resistant polycarbonate or acrylic panels (for projector visibility), designed to protect equipment from rain, sunlight, dust, and wind. Each canopy shall include a sloped roof for water drainage, IP55 or higher ingress protection rating, proper ventilation to prevent overheating, lockable access panels for maintenance, vibration-dampening mounts (for speaker housings), and suitable mounting provisions (wall, ceiling, or pole). All materials must be anti-corrosive and suitable for long-term outdoor use. Installation shall follow manufacturer guidelines and site conditions. Approved Makes / Equivalent: Tempest, Chief (Legrand), Peerless-AV, SunBriteTV, Vanco, Middle Atlantic, or equivalent.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
37.
Public Administrative Department #9294316 Technical Bid
Installation And Commissioning Of 70 Kw Transmission Coupled Solar Power Generation Project At Indira Gandhi Sanskrutik Kendra Chiplun
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
38.
Environment and Forests #9263685 Technical Bid
Supply, Installation And Commissioning Of Real Time Ambient Noise Monitoring System For 36 Locations , Noise Monitoring Terminal (Nmt) For 36 Locations , Iec 61672-1 (2002-05) Class 1: Outdoor Microphone , Nmt System With Alphanumeric Display Board , High Gain Gsm/ Gprs Antenna (8 Db Dual Band Antenna) , Ip-65 Compliant Enclosure For Remote Stations , Transmission Unit - Gsm/ Gprs Modem , Instrusion Alarm To Be Transmitted At Central Station , Power Backup For 36 Locations , External Battery (Minimum 65Ah) Sealed Maintenance Free , Solar Panel For Power Backup (Minimum 75 Watts) , Solar Charge Controller (Minimum 20 Amp) , External Nema 4 Enclosure , Recurring Charges For 36 Locations , Remote Station Recurring Charges On Yearly Basis Including Sim Cost, Number Of Stations Recurring Cost And Any Other Cost. , Recurring Charges On Yearly Basis For Central Server With 4Mbps Fixed Ip Connection. , Remote Display, Gprs Receiving Charges On Yearly Basis , Central Receiving Station , Charges For Empaneled Cloud Based Server , Analysis Software With Full Graphics Display, Communication 1 Management And Database Generation For Cloud Based Server , Web Enabled Software For Data Distribution , Central Oled 72 Inch Led Tv Along With Support Structure , Installation And Civil Work , 4 Meters Triangular Lattice Mast And Mounting Accessories , Installation Of The Remote Stations With Civil Work , Automatic Backup , 4 Tb Nas Drive For Incremental Backup Of Existing And New System. , Caliberators , Hand Held Stand Noise System With Transportation Kit , External Acoustiv Calibrator With Microphone Adaptor , Transportation And Insurance , Transportation And Insurance Of Material To Respective Sites , Two Year Extended Warranty , Two Year Extended Warranty , Camc , Comprehensive Annual Maintenance Cost For 4Th Year , Comprehensive Annual Maintenance Cost For 5Th Year , Comprehensive Annual Maintenance Cost For 6Th Year , Comprehensive Annual Maintenance Cost For 7Th Year , Comprehensive Annual Maintenance Cost For 8Th Year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Maharashtra View Result →
39.
Power #9231122 Technical Bid
Construction Of 220Kv Gis Substation, Sector-75A, Gurugram -- 1 220kV SystemThe 245kV SF6 gas insulated switch gear for three phase system shall have double bus bar arrangement with 7 bays (2 No. 100MVA 220/33kV transformer bay, 1 no. bus-coupler and 4 nos. feeder bays). Space for future 1 No. transformer bay and 2 No. Line bays and jointing plugs shall be kept in GIS hall for adding future bays and jointing plugs required for connecting GIS of different makes. The SF6 gas insulated switch gear rated for 220kV, 3-phase, 50 HZ 50kA fault level shall be of the indoor metal-enclosed type, comprising of following items.245kV, 2000A, single 3 – ⏀ or three 1 –⏀SF6 gas insulated, metal enclosed Bus bar arrangement, consisting of 2000Asingle 3 – ⏀or three 1 – ⏀ SF6 gas insulated switchgears, each Bus Bar comprising of:-i) Bus bar enclosures running the length of the switchgear to interconnect each of the circuit breaker bay modules in double main bus system.ii) Three, 2-core, single phase or single 3 – ⏀ ,2 core each phasevoltage transformers/ PTs.iii) 2000A, One 3 – ⏀or three 1 –⏀ , single pole, group operated isolator/disconnector with one, 3 – ⏀or three 1 –⏀, single pole, group operated earthing switch with manual and motor driven operating mechanisms.iv) 2000A, One high speed 3 – ⏀or three 1–⏀ , single pole, group operated earthing switches, complete with manual and motor driven operating mechanisms.v) Each GIS compartment with gas monitoring device, pressure switch etc. as required.vi) Terminal boxes/ Local Control Cubicle.vii) Interconnecting wiring/ piping.viii) Grounding, support structures and platforms. 2 245kV, 2000A, single 3 – ⏀or three 1 –⏀ , Bus coupler bay module, consisting of 2000Asingle 3 – ⏀or three 1 –⏀SF6 gas insulated switchgears, comprising of:i) 2000A, One 3 – ⏀or three 1 – ⏀ , SF6 gas insulated circuit breaker, complete with operating mechanism.ii) Three, 5-core, single phase current transformers (1200-800-400/1-1-1-1-1A)iii) 2000A, Two sets of single pole, group operated isolator/disconnector switches each with single pole, group operated earthing switch and complete with manual and motor driven operating mechanisms.iv) Each GIS compartment with gas monitoring device, pressure switch etc. as required.v) Terminal boxes/ Local Control Cubicle.vi) Interconnecting wiring/ piping.vii)Grounding, support structures and platforms. 3 245kV, 1250A, single 3 – ⏀or three 1 –⏀ , Transformer feeder circuit breaker bay module,consisting of 1250Asingle 3 – ⏀or three 1 – ⏀SF6 gas insulated switchgears, for transformer, each comprising of:-i) 1250A, One 3 – ⏀or three 1 –⏀ , SF6 gas insulated circuit breaker, complete with operating Mechanism.ii) Three, 5-core, single phase current transformers (450-300/0.577-1-1-1-1A)iii) 1250A, One 3 – ⏀or three 1 –⏀ , single pole, group operated isolator/disconnector without earthing switch, complete with manual and motor driven operating mechanisms.iv) 1250A, One 3 – ⏀or three 1 –⏀ , single pole, group operated isolator/disconnector with one 3 – ⏀or three 1 –⏀ , single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms.v) 1250A, One 3 – ⏀or three 1 –⏀ , single pole, group operated isolator/disconnector with two earthing switches each comprising of one 3 – ⏀or three 1 – ⏀ , single pole, group operated earthing switches complete with manual and motor driven operating mechanisms.vi) Each GIS compartment with gas monitoring device, pressure switch etc. as required.vii)Terminal boxes/ Local Control Cubicle.viii) Interconnecting wiring/ piping.ix) Grounding, support structures and platforms. 4 245kV, 1250A, single 3 – ⏀or three 1 –⏀ , Transmission line feeder circuit breaker bay modules, consisting of 1250Asingle 3 – ⏀or three 1 –⏀SF6 gas insulated switchgears, each comprising of:-i) 1250A, One 3 – ⏀or three 1 – ⏀ , SF6 insulated circuit breaker, complete with operating mechanism.ii) Three, 5- core, single phase current transformers (1200-800-400/1-1-1-1-1A)iii) 1250A, One 3 – ⏀or three 1 – ⏀ , single pole, group operated isolator/disconnector without earthing switch, complete with manual and motor driven operating mechanisms.iv) 1250A, One 3 – ⏀or three 1 – ⏀ , single pole, group operated isolator/disconnector with one, 3 – ⏀or three 1 – ⏀ , single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms.v) 1250A, One 3 – ⏀or three 1 – ⏀ , single pole, group operated isolator/disconnector with one normal and one high speed 3 – ⏀or three 1 – ⏀ , single pole, group operated earthing switches, complete with manual and motor driven operating mechanisms.vi) Each GIS compartment with gas monitoring device, pressure switch etc. as required.vii)Terminal boxes/ Local Control Cubicle.viii) Interconnecting wiring/ piping.ix)Grounding, support structures and platforms. 5 a) 220kV XLPE Copper cables (4X1CX400mm2) to connect 220kV side of 100MVA Transformer with GIS(approx.) 6 b) Termination kit at both ends for 220kV XLPE Copper cables (1CX400mm2). (Termination Kit for (GIS/AIS) both ends along with all accessories constitute a set for each cable) 7 a) 220kV XLPE Copper cables (4X1CX1000mm2) to connect 220kV transmission line feeders with GIS (approx.) 8 b) Termination kit at both ends for 220kV XLPE Copper cables (1CX1000mm2) (Termination Kit for (GIS/AIS) both ends along with all accessories constitute a set for each cable) 9 Ventilation system (AHU) to accommodate in designated room in GIS hall as per Annexure-V as it is already an integral part of the ventilation system 10 33kV SystemThe 36kV SF6 Gas Insulated Switchgear for three phase system shall have single bus bar arrangement with 26 bays (4 No. Transformer I/C bays from two 100MVA Transformers, 2 No. bus-sectionalizer bays, 16 nos. feeder bays, 2 No. T/F bays for Auxiliary Supply and 2 No. Capacitor bank bays). Space for 12 Nos. future bays (2 No. I/C of 220/33kV T/F bay, 8 No. line bays and 1 No. capacitor bank, 1 No. bus-sectionalizer bay for future) shall be kept in GIS hall for adding future bays and jointing plugs required for connecting GIS of different makes. The SF6 Gas Insulated Switchgear rated for 33kV, 3-phase, 50Hz, 31.5kA for 3 sec. fault level shall be of the indoor metal-enclosed type, comprising of following items. 36kV, 2000A,single 3 – ⏀ or three 1 –⏀, SF6 gas insulated, metal enclosed bus bars arrangement, consisting of 2000Asingle 3 – ⏀ or three 1 –⏀ SF6 gas insulated switchgears, each Bus Bar comprising of (single bus for each T/F with bus sectionaliser) :- i) Bus bar enclosures running through the length of the switchgear to interconnect each of the circuit breaker bay modules in single bus system.ii) Each GIS compartment with gas monitoring device, pressure switch etc. as required.iii) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc.iv) Interconnecting wiring/ piping.v) Grounding, support structures and platforms. 11 36kV, 2000A,single 3 – ⏀ or three 1 –⏀, SF6 gas insulated, metal enclosed bus sectionaliser, consisting of 2000Asingle 3 – ⏀ or three 1 –⏀ SF6 gas insulated switchgears, each Bus Sectionaliser comprising of :(1 for each T/F) i) 2000A, One 3 – ⏀ or three 1 – ⏀, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for sectionaliser bay.ii) Three, single-core, single phase current transformers (2000-1000/5A)iii) Two sets of 2000A, two 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with one, 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms.iv) Two sets of Three, 2-core, single phase or single 3 – ⏀, 2 corevoltage transformers/ PTs.v) Two sets of 2000A, One 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with one, 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switch with manual and motor driven operating mechanisms.vi) Two sets of 2000A, high speed 3 –  or three 1 – , single pole, group operated earthing switches, complete with manual and motor driven operating mechanisms.vii) Each GIS compartment with gas monitoring device, pressure switch etc. as required.viii) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc.ix) Interconnecting wiring/ piping.x) Grounding, support structures and platforms 12 36kV, 2000A, single 3 – ⏀ or three 1 –⏀, Incomer transformer bay modules, consisting of 2000Asingle 3 – ⏀ or three 1 –⏀ SF6 gas insulated switchgears, for 100MVA, 220/33kV transformers, each comprising of: - (2 for each T/F) i) 2000A, One 3 – ⏀ or three 1 – ⏀, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for incomer bay from 220/33kV transformer.ii) Three, 4-core, single phase current transformers (2000-1000/0.577-5-5-1A)iii) 2000A, Two 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with one, 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms.iv)2000A, One 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with two earthing switches each comprising of one 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switches complete with manual and motor driven operating mechanisms.v) Each GIS compartment with gas monitoring device, pressure switch etc. as required.vi) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc..vii) Interconnecting wiring/ piping.viii)Grounding, support structures and platforms.ix) Set of Surge Arrestors & Voltage Detectors 13 36kV, 630A, single 3 – ⏀ or three 1 –⏀, Transmission line feeder circuit breaker bay modules, consisting of 630Asingle 3 – ⏀ or three 1 –⏀ SF6 gas insulated switchgears, each comprising of:- (8 for each T/F) i) 630A, One 3 – ⏀ or three 1 –⏀, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for outgoing feeder.ii) Three, 3-core, single phase current transformers (600-300/5-1A)iii) 630A, One 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with one, 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms.iv) 630A, One 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with one normal and one high speed fault make 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switches, complete with manual and motor driven operating mechanisms.v) Each GIS compartment with gas monitoring device, pressure switch etc. as required.vi) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc.vii) Interconnecting wiring/ piping.viii) Grounding, support structures and platforms.ix) Set of Surge Arrestors & Voltage Detectors 14 36 kV, 630A, 31.5 kA for 3 sec, SF6 gas insulated Capacitor Bay Modules, consisting of 630A single 3 – ⏀ or three 1 –⏀, SF6 gas insulated switchgears, each comprising of:- (1 for each T/F)i) 630A, One 3 – ⏀ or three 1 –⏀, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for outgoing feeder.ii) Three, 3-core, single phase current transformers(400-300/5-5A)iii)630A, One 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with one, 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms.iv) 630A, One 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with one normal and one high speed fault make 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switches, complete with manual and motor driven operating mechanisms.v) Each GIS compartment with gas monitoring device, pressure switch etc. as required.vi) Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc.vii) Interconnecting wiring/ piping.viii) Grounding, support structures and platforms.ix) Set of Surge Arrestors & Voltage Detectors 15 36 kV, 630A, 31.5 kA for 3 sec, SF6 gas insulated S/Stn Transformer Bay Modules, consisting of 630A single 3 – ⏀ or three 1 –⏀, SF6 gas insulated switchgears, each comprising of:- (1 for each T/F) i) 630A, One 3 – ⏀ or three 1 –⏀, SF6 gas insulated vaccum circuit breaker, complete with operating mechanism for outgoing feeder.ii) Three, single phase 2-core current transformers (60-30/5-1A)iii) 630A, One 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with one, 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switch, complete with manual and motor driven operating mechanisms.iv) 630A, One 3 – ⏀ or three 1 – ⏀, single pole, group operated isolator/disconnector with two earthing switches each comprising of one 3 – ⏀ or three 1 – ⏀, single pole, group operated earthing switches complete with manual and motor driven operating mechanisms.v) Each GIS compartment with gas monitoring device, pressure switch etc. as required.vi)Terminal boxes/ Local Control Cubicle consisting of all protection relays, mechanism control system, indication system etc.vii) Interconnecting wiring/ piping.viii) Grounding, support structures and platforms.ix) Set of Surge Arrestors & Voltage Detectors 16 33kV XLPE copper Cable (6X1Cx1000mm2) for connecting 33kV side of each I/C of 220/33kV transformer with GIS. (Two cables shall be used in each phase for each I/C, i.e. 2 Runs per phase x 3 no. Phase x 4 no. I/C) (approx.) 17 Single phase Termination kit for both end for 33kV XLPE copper Cable (1cx1000mm2)(Termination Kit for (GIS/AIS) both ends along with all accessories constitute a set for each cable) 18 33kV XLPE copper Cable (3cx300m2) for connecting 33kV capacitor bank bay(approx.) 19 Three phase Termination kit for both end for 33kV XLPE copper Cable (3cx300mm2) (Termination Kit for (GIS/AIS) both ends along with all accessories constitute a set for each cable) 20 33kV XLPE copper Cable (3cx95mm2) for single ckt. for station transformer(approx.) 21 Three Phase Termination kit for both end for 33kV XLPE copper Cable (3cx95mm2)(Termination Kit for (GIS/AIS) both ends along with all accessories constitute a set for each cable) 22 100 MVA 220/33 kV Power T/F along with10% extra T/F oil 23 NIFPES for 220/33 kV Power T/F 24 220 kV Surge Arrestor 25 33 kV Surge Arrestor (Including Capacitor Bank) 26 220 kV NCT (450-300/1A) 27 33 kV NCT For 220/33kV T/F (2000-1000/5A) 28 220 kV CVT For Line 29 220kV C&R Panels with SASCkt breaker control Panel with auto reclose & line Protection Panel 30 Ckt breaker control Panel without auto reclose and Transformer protection panel (for both HV & LV side of 220/33kV T/F)(each T/F have 2 no. 33kV Incomer) (1 No. for each T/F) 31 Ckt breaker control Panel without auto reclose and Bus Coupler cum Bus Bar Protection panel (Double Bus bar ) 32 Time synchronizationequipment 33 1 X 21.744 MVAR 33 kV rating Capacitor Bank along with Str. & allied equipments ( NCTs Series Reactor etc.) as perspecification 34 33 kV Line and Earth switch for Cap Bank (630 Amp.) 35 220V 200 AH Tubular Type Lead Acid San Container Battery 36 220 V 200 AH SMPS Battery charger 37 220 V D.C.D.B. 38 415 V LT AC Distribution Board 500 A 39 33/0.4 kV Station T/F 200 KVA 40 100 KVA DG Set along with associated accessories 41 EOT-Crane as per clause 3.10.7 Section-1 and Clause 29.0 of GIS Specification and as per EOT crane specification.(10T) 42 1.1 kV Copper Control Cable Armoured (FRLS type) for 220 kV bays of sizes 7CX4mm2, 2CX4mm2, 4CX4mm2, 2CX6mm2, 16CX2.5mm2, 10CX2.5mm2, 7CX2.5mm2, 3CX2.5mm2 etc. including junction box (as per HVPNL Tech spec.). 43 1.1 kV Copper Control Cable Armoured (FRLS type) for 33kV side of sizes 7CX4mm2, 2CX4mm2, 4CX4mm2, 2CX6mm2, 16CX2.5mm2, 10CX2.5mm2, 7CX2.5mm2, 3CX2.5mm2 etc. including junction box (as per HVPNL Tech spec.). 44 650/1100 Volts 3.5 core 240 mm2 aluminum power cable from Aux. T/F to ACDB 45 650/1100 Volt 3.5 core 70 mm2 aluminum cable for oil filtration set. 46 650/1100 Volt 4 core 16 mm2 armoured copper power cable for MLDB etc and other cable required as per contract. 47 Grounding system of the substation. Earthing Mat Material. The earth mat will be designed / quoted for soil resistivity of 50m. In case soil resistivity is more than 50m then the earth mat will be designed for actual soil resistivity. The payment of extra material to be used for earth mat shall be made on pro rata basis. The approximate area of earth mat to be laid is given in the corresponding columns of the substations. However, item will remain a Lot item.(9300 sq meter (approx) . Note:- Earthing of sub-station and equipments should be in line with HVPNL Tech. spec. and IEEE-80 considering fault and shock duration of 1 sec. 48 Fire Fighting equipments as per section-6:22.5 Kg Capacity FE CO2 type, Trolley Mounted 49 25 Kg Capacity FE DCP type, Trolley Mounted 50 DCP 9 Kg Capacity, Wall mounted 51 FE CO2 6.5 Kg Capacity, Wall mounted 52 DCP 6 Kg Capacity, Wall mounted 53 Foam Type 9 Litre Capacity, Wall mounted 54 Water CO2 9 Litre, Wall mounted 55 Fire Buckets(12 No.s with stand in one set) 56 Supply and installation of 2 fittings of 240W LED lamps with all accessories for Complete lighting of outdoor Switch yard area including all accessories, cables etc. as per clause 16.0 of section 7 of the specifications. 57 Complete lighting of road and street by providing 90W LED lamps on tubular steel poles at a distance of 15meter along the roads and streets including all accessories, cables etc. as per clause 16.0 of section 7 of the specification 58 (A) Supply and installation of 35W LED tube fitting on tubular steel poles along Fencing/ boundary wall at a distance of 30 meter including all accessories, cables etc. as per clause 16.0 of section 7 of the specification. 59 (B)Supply and installation of post top lantern 40W LED Lamps with all complete accessories at the entrance gate of sub-station. 60 Supply and installation of 40W LED Lamps with all complete accessories on corners of control room building. 61 High wall type split AC unit of 2 Ton capacity for computer room (2 no.) and C&R Panel room (4 no.) (as per technical specification) 62 Complete substation automation system for 220/33 kV substations including hardware (along with transducers)& software for present Bays and software for future bay along with associated equipment for the bays as defined in the technical specification, section sub-station automation system) as per technical specification. The scope for present and future is as under:- 220kV System: Present Bays: Line bays=4 T/F bays =2 Bus coupler =1 Future Bays Line bays=2 T/F bays =1 Bus coupler =033kV System: Present Bays: Line bays=16 T/F I/C bays =4 Bus Sectionliser bay =2 Capacitor bay =2 & Station T/F bay=2 Future Bays Line bays=8 T/FI/Cbays =2 Bus Sectionliser bay =1 Capacitor bay =1 & Station T/F bay=0 63 Computer system (SFF) with:Intel Core i5 processor with 11th generation or higher, 1x16GB DDR-IV RAM 2933 MHz or higher expandable upto 64 GB, 1 TB SSD or higher, 19.5” or higher TFT LCD Display (Backlit LED), Preloaded OS: Windows 11 Professional64-bit OEM or higher, with UPS (600VA offline UPS system 1x7AHx12V, MS-Office 2021 standard perpetual licensees or higher, etc. 64 Mono chrome Multi-functional Printer, A-4, 25 PPM, Copy & Scan function, Networking & Wi-Fi both, atleast 1 input tray 65 BOM FOR SAMAST COMPLIANT IEM ( ON SEPARATE CUBICLE) FOR 33 KV I/Ci. 3P4W Interface Energy Meters (ABT type) 0.2s Class 1A with TTB & BCS (02 no. for each 33 KV Incomer) 66 Testing of IEM System from NABL accredited lab 67 Wired Indoor Meters Panel suitable for 8 meters 68 16 P Industrial Grade un-managed Network switch 69 Data concentrator unit (DCU)/ communication Gateway (IG) with dual SIM Modem along with enclosure and accessories 70 Cat-6 cable-unshielded 71 PVC conduit Pipe - 3/4 with accessories for Cat-6 cable lot Lot (In line with cat-6 cable) 72 Armored Fibre Optic Cable (2 pair) 73 HDPE conduit - 40/33 with accessories (In line with armored cable for CT/PT) 74 4Cx4 Sqmm armored and 3Cx2.5 Sqmm, armoured (FRLS) copper control cables (as per note given below)Note- 4Cx4 Sqmm armored and 3Cx2.5 Sqmm armoured (FRLS) copper control cables shall be used for integration of IEMs. The provision of providing the same is to be covered in respective entry of cables of the BoQ. 75 Bolted type 220 kV single suspension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 90kN) per string with hardware accessories including ball & socket connection and suspension clamp set suitable for single Tarantula (string). 76 Bolted type 220 kV single suspension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 90KN) per string with hardware accessories including ball & socket connection and suspension clamp set suitable for Twin Tarantula (string). 77 Bolted type 33 kV single tension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 90KN) per string with hardware accessories including ball & socket connection and tension clamp set suitable for twin Tarantula (string). 78 Bolted type 33 kV single suspension string assembly with Silicone Rubber Polymer Composite Insulators (E&M strength 90KN) per string with hardware accessories including ball & socket connection and suspension clamp set suitable for twin Tarantula (string). 79 C- Wedge connectors matching with conductor size. 80 Copper lugs glands, PVC ferrules for control cabling. 81 Fiber cleats, Aluminium clamps, bolts, nuts, washers etc for fixing control cables in trenches 82 Galvanized iron perforated tray with side coupler plate bolts, nuts, washers and clamps etc. of size 75x25x2 mm, 150X25X2mm, 100X25X2mm etc. & G.I. Conduits of 50mm/100mm dia from equipment to main trench as per Section-7, Switchyard erection. 83 AAC Tarantula Conductor(approx) 84 Spacers for Twin Tarantula conductor 85 7/3.15 Earthwire 86 U-bolt 20mm dia 87 Item for associated structure work‘Lattice type steel structure for 220kV GIS S/Stn.Sector-75A, Gurgaon. Supply of material, preparation of fabrication drawing, galvanizing and delivery of lattice type steel structure for tower and beams for 220/33kV switchyard fabricated from steel conforming to IS:2062 including nuts-bolts gusset plates foundation bolts and other accessories as per drawings supplied by the owner.Main S/Stn. Tower and beamTower type AT-1 88 Tower type AB-1 89 Tower type CT-4 90 Tower type CT-5 91 Beam type DD-1 92 Equipment Supporting Structure) 220 kV NCT drg. No. HTD/ST-150 93 220 kV CVT drg. No. HTD/ST-147 94 220 kV surge arrestor drg.No.HTD/ST-93R 95 33 kV NCT Drg. No. HTD/ST-88 96 33KV L&E switch HTD/ST-110 97 33 kV Surge Arrestor Drg. No. HTD/ST-89R 98 220kV Cable Support Structure for 220kV XLPE Cable(To be designed by the bidder) 99 33kV Cable Support Structure for 33kV XLPE Cable(Drg. No. HTD/ST-89R to be used for Cable Support Structure drawing) 100 220kV D/C line from Sohna Road to 220KV GIS sector-75A, Gurugram :PLC terminals (No.) 101 PLC terminal with Prot.coupler (No.) 102 Wave trap 1250A 103 LTU (P/P) (Set.) 104 48V Lead Acid Tubular San container Battery& SMPS Battery Charger (300AH) 105 HFcable (kms) 106 220kV D/C Panchgaon (PGCIL) to 220KV GIS sector-75A, Gurugram:PLC terminals (No.) 107 PLC terminal with Prot.coupler (No.) 108 Wave trap 1250A 109 LTU (P/P) (Set.) 110 HFcable (kms) 111 Equipments for maintenancePortable circuit breaker operation analyzer. 112 Digital Micro-Ohm meter for contact resistance measurement Ranges (0-100 ohm)(0-1 milliohm)(0-10 milliohm). 113 Dew Point meter 114 Portable partial discharge monitoring system for GIS. 115 Digital Earth resistance meter. 116 5 kV Automated insulation resistance tester. 117 Earth stick with lead suitable for use in 220/33kV Switchyard 118 SF-6 Gas filling and evacuating plant 119 SF-6 Gas leak detector (Portable) 120 Tools for gas handling 121 LT DC Leakage detector from control cabinets and LT cables 122 Mandatory Spares for 220KV GISGeneralComplete GIS modules, along with enclosure, all active parts such as conductor, conductor joints, shields, end covers etc. for each type of➢ Bus Bar Sections (including Bus Bar Interconnection Modules)➢ Bus Ducts Sections (including Compensators/expansion joints/bellows)➢ Bends➢ SF6/Air Bushing.➢ Oil/SF6 Bushing➢ Cable Termination kit 123 SF6 gas Pressure Relief Device assembly of each type 124 SF6 Pressure gauge cum switch /Density monitors and pressure switch as applicable, of each type 125 Coupling device for pressure gauge cum switch for connecting Gas handling plant of each type 126 Rubber Gaskets, “O” Rings and Seals for SF6 gas for GIS enclosures of each type 127 Molecular filter for SF6 gas with filter bags (10 % of total weight) 128 Control Valves for SF6 gas of each type 129 SF6 gas (20 % of total gas quantity) 130 Pipe length (Copper or Steel as applicable) for SF6 Circuit of each type (if applicable) 131 Locking device to keep the Dis-connectors (Isolators) and Earthing/Fast Earthing switches in close or open position in case of removal of the driving Mechanism 132 UHF PD Sensors of each type along with BNC Connector 133 Support Insulators (gas through) of each type (complete with metal ring etc.) 134 Gas Barriers of each type (complete with metal ring etc.) 135 SF6 to air bushing of each type complete in all respect 136 SF6 CIRCUIT BREAKERComplete Circuit Breaker (Three Phase) with interrupter, main circuit, enclosure and Marshalling Box with operating mechanism to enable one to one replacement of applicable type of CB by spare. (if applicable) 137 Fixed, moving and arcing contacts including insulating nozzles of each type (for Main Chamber & PIR Chamber as applicable) 138 Trip coil assembly with resistor as applicable 139 Closing coil assembly with resistor as applicable 140 Relays, Power contactors, push buttons, timers & MCBs etc. of each type 141 Auxiliary switch assembly of each type 142 Operation Counter 143 Wind scope / Observing window of each type 144 For Hydraulic Operated Mechanism, if applicableHydraulic operating mechanism with drive motor of each type 145 Ferrules, joints and couplings of each type 146 Hydraulic filter of each type 147 Hose pipe of each type 148 N2 Accumulator of each type 149 Valves of each type 150 Pipe length (copper & steel) of each size & type 151 Pressure switches of each type 152 Pressure gauge with coupling device of each type 153 Hydraulic oil (20% of total Oil quantity) 154 Pressure Relief Device of each type 155 For Spring Operated Mechanism, if applicableComplete Spring Operating Mechanism including charging mechanism etc. of each type 156 Spring Charging Motor 157 For Hydraulic-Spring Operated Mechanism, if applicableComplete Hydraulic-Spring Operating Mechanism including charging mechanism etc. of each type 158 Spring Charging Motor 159 Pressure switches of each type 160 Pressure gauge with coupling device of each type 161 Disconnector Switches/Earthing SwitchesComplete set of 3-phase dis-connector of each type including main circuit, enclosure, driving mechanism and support Insulator etc. to enable complete one to one replacement of all applicable type of Isolator by spare 162 Complete set of 3-phase Maintenance Earthing switch of each type, including main circuit, enclosure, driving mechanism and support Insulator etc. to enable complete one to one replacement of all applicable type of Earth Switch by spare 163 Complete set of 3-phase Fast Earthing switch of each type, including main circuit, enclosure, driving mechanism and support Insulator etc. to enable complete one to one replacement of all applicable type of Earth Switch by spare (if applicable) 164 Copper contact fingers & corona shield for dis-connector male & female contact–for one complete (3-phase) dis-connector of each type 165 Copper contact fingers & corona shield for Maintenance Earthing switch male & female contacts, for one complete (3- phase) earthing switch of each type 166 Copper contact fingers & corona shield for Fast Earthing switch male & female contacts, for one complete (3-phase) earthing switch of each type (if applicable) 167 Open/Close contactor assembly, timers, key interlock, interlocking coils, relays, push buttons, indicating lamps, Power contactors, resistors, fuses, MCBs & drive controlcards etc. one of each type for one complete MOM boxFor Disconnector 168 For Maintenance Earth switch 169 For Fast Earthing Switch (if applicable) 170 Limit switches and Aux. Switches for one complete MOM BoxFor Disconnector 171 For Maintenance earth switch 172 For Fast Earthing Switch (if applicable) 173 Drive Mechanism of each typei. For Disconnector 174 ii. For Maintenance earth switch 175 iii. For Fast Earthing Switch (if applicable) 176 Motor for Drive Mechanism of each typei. For Disconnector 177 ii. For Maintenance earth switch 178 iii. For Fast Earthing Switch (if applicable) 179 CURRENT TRANSFORMERComplete CT of each type and rating as supplied with enclosure and primary conductors to enable one to one replacement of all applicable type/rating of CT by spare 180 Voltage TransformerComplete PT of each type with enclosure to enable one to one replacement of all applicable type/rating of VT by spare (if applicable) 181 SURGE ARRESTORComplete Gas insulated Surge arrester of each type and ratings with enclosure and insulator (if applicable) 182 Surge counter/ monitor of each type (if applicable) 183 Local Control Cubicle (LCC)Aux. relays, Contactors, Push Buttons, Switches, Lamps, Annunciation Windows, MCB, Fuses, Timers, Terminal Blocks etc. of each type & rating 184 MANDATORY SPARES (33kV GIS)Line voltage transformer (3 nos.) 185 Bus voltage transformer (3 nos.) 186 Current transformers suitable for incomer panel (3 nos.) 187 Current transformers suitable for transformer panel (3 nos.) 188 Current transformers suitable for bus coupler panel (3 nos.) 189 Trip Coil 190 Closing Coil 191 CB Spring charging motor 192 Auxiliary switch (2 no. each type) 193 Disconnector motor for isolator 194 Disconnector motor for earth switch 195 Gas density switch 196 Bursting disc / pressure relief plate complete 197 Capacitive voltage indicator (6 nos.) 198 Civil portionEARTH WORK IN FILLING: Earth filling with good earth (as per satisfaction of Executive Engineer/Civil Works Division), laying in layers (as per specification), dressing, including carriage, irrespective of lead, loading, unloading, watering and compaction in layers with roller including compensation of earth complete in all respect. 199 FOUNDATIONS :Design engineering, supply of labour,T&P,material and construction of RCC footings & pedestals etc. for steel gantry and equipment structures complete in all respects as per technical specifications including cost of excavation,concreting,cement,reinforcement steel,form work,grouting,holding down bolts,back filling etc. and other items not mentioned herein but required for the completion of work.GANTRY TOWERS AT-1 200 CT-4 201 CT-5 202 EQUIPMENT 220kV side220kV LA 203 220kV CVT 204 220kV NCT 205 33 kV side33kV LA 206 33kV NCT 207 CABLE SUPPORT STRUCTURE Design, Engineering, Supply of labour, material and Construction of cable support structure foundations including all associated works, RCC, PCC, reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specifications. 220 KV Cable Support Structure 208 33kV Cable Support Structure 209 ROADSSupply of labour, material and construction of cement concrete roads and walkways/shoulders from NH/SH/etc. to Switch yard/Switch house building as per GELO/CLO as per sectional detail drawing no. HCD/SK-181 R1 and technical specification.6.0m wide road (Near main gate of substation) 210 5.0m wide road within substation 211 3.66m wide road within substation 212 CAPACITOR BANK FOUNDATIONSDesign, Engg. & supply of labour, material & construction of foundations for capacitor bank with capacitor unit (with allied equipments) & series Reactor etc. including chain link fencing 1.8M height around cap. bank complete in all respect including any other items not specifically mentioned herein but required for completion of job as per technical specification.1x21.744MVAR 33kV capacitor bank 213 ROAD CULVERTDesign, Engineering and const. of Pipe culvert(s) at suitable locations under the approach road (from main PWD/ HUDA/Municipal/Village road to the sub-station entry point) including, cost of labour, material complete in all respects as per I.R.C. Standards. 214 TRANSFORMER FOUNDATIONDesign engineering, supply of labour, material and construction of foundations including T/F radiator foundations etc. complete in all respect including all associated works, RCC, PCC, Reinforcement steel, misc. structural steel and other items not mentioned here in but required for the completion of work as per technical specifications. In case additional foundation is/ are required as per approved equipment drawing, the same shall be constructed by the successful bidder without any extra cost toHVPNL.Such drawing(s)shall, however, be got approved from HVPNL.100MVA,220/33kV T/F foundationincluding associated foundations for radiator, NIFPES, fire fighting system etc. complete in all respect. 215 200KVA 33/0.4kv Station T/F 216 100kVA DG Set 217 OUTDOOR CABLE TRENCHESSupply of labour, material such as cement, reinforcement steel, GI angles, flats, PCC & brick pillars below cable trenches for construction of Out-Door Cable Trenches (ODCT) of required depth/ type with pre-cast RCC covers including associated works like Cable Trench Culverts crossings for roads and sumpit-cum-pump chamber with 2HP motor of reputed make, starter, volt meter, amp-meter etc. as per approved Trench layout plan, HVPNL drgs. & tech. specs. complete in all respect.D-type Trench 218 E-type Trench 219 F-type Trench 220 G-type Trench 221 H-type Trench 222 Road Culvert 223 Sump pit cum pump chamber 224 SITE SURFACINGProviding, supplying & laying 100mm thick in two layers of 50mm each of 20mm nominal size uncrushed/crushed/ broken stone pebbles gravel fill including dressing, rolling & compacting complete in all respects as per specs. & instructions of engineer incharge. 225 Providing, supplying & laying 100mm thick PCC (1:4:8) using 20mm nominal coarse aggregates and supplying & spreading 100mm thick layer of 40mm nominal size uncrushed/ crushed/broken stone pebbles over the PCC including construction of toe wall (exposed wall plastered with cement mortar 1:5) to hold 40mm single size uncrushed/ crushed /broken stone pebbles wherever required in the bays covered under the present scope as detailed in the GELO & instructions of engineer incharge. 226 RCC retaining wallSupply of labour, material and construction ofRCC retaining wall below DPC to retain the earth filling complete in all respect. Further, if L-shape retaining wall is required to be constructed as per site, the successful bidder shall develop the designs & drawings as per the soil investigation report attached in specification and shall get these checked/vetted from any professsional institute as per contract before final approval. Nothing extra shall be paid on this account. i. Difference between NGL & FGL from 2.5 to 3.5 mtr. 227 ii. Difference between NGL & FGL from 3.5 to 4.0 mtr. 228 Design engineering, supply of labour,material and construction of RCC T/L shaped retaining wall below DPC to retain the earthfilling complete in all respect and design /drawing shall be got checked/ vetted from any professsional institute as per contract before final approvalNothing extra shall be paid on this account. Iii. Difference between NGL & FGL above 4.0 mtr. 229 BOUNDARY WALL;Supply of labour, T&P, material & construction of front, side & U/C boundarybelow DPC level as per GELO/CLO, tech. spec. & HVPNL drgs including excavation, PCC, brickwork, back filling, plaster, painting etc. complete in all respects. 230 Supply of labour, material and construction of front, C & U/C boundary walls above DPC including main gate foundationsas per GELO/CLO, technical specifications. & HVPNL drg. HCD/TS-1176 R3 including DPC complete in all respect..6 ft. high U/C B/wall with barbed wire on angles at top. 231 4½ ft. high front wall including providing grill at top of wall & construction of gate pillars. 232 4½ ft. high side wall with barbed wire on angles at top of wall. 233 MULTISTOREY 33kV GIS CUM CONTROL ROOM BUILDINGDesign including architectural and structural design/drawings, Engineering, supply of labour,T&P and material etc.for construction of multi storey GIS Hall comparising of ground and1st floor (to accumulate 33kV GIS & Control Room Building) including exterior weather proof paint, interior emulsion, all internal services like water supply and providing of 5000ltr. Capacity double layer Sintex/ Diplast PVCtank,Sewerage System, electrification including wiring, receptacle, modular switches, lighting, maximum 20W 4ft. long LED tube swith fittings minimum 1960 lumens, bulk headlig hts including fixtures. ceiling/ exhaust fans, plinth protection, closed drain (RCC Pipe)around building, Indoor trenches and provision for mechanical operated crane system adjacent to building, Soakage pit ,connection of sewerage system to Soakage pit/ sewerage system of local authority (as applicable), connection to main water supply system of local authority, bore (asapplicable)etc. and any other item not mentioned here in but required for completion of job as per specifications. Minimum size of the buildings has been provided in the GELO.Since the detailed engineering is in the scope of the successful bidder, no claim for increase in size of the building shall be admitted.The GIS Hall should be equipped with fire detection system and shall be done by the succesfull bidder without any extra cost to employer.The building should be design to ensure early warning and prompt response in case offire.The system must include advance smoke detection system, advance heat detection system, audible and visual alarms alongwith alarm panels, fire extinguishers, fire buckets, warning signs, exitplans, etc complete in all order torun the system efficiently, wherever required as per latest IS Codal provision and in consultation with engineer incharge. 234 U/C FENCING & GATES Providing & fixing chain link fencing including foundations, GI angle iron posts and gate(s) complete as per electrical layout & tech. spec. & as per drawing attached. 235 PCC PAVEMENTConstruction of PCC pavement in front, rear or side (as per site requirement of the switch house building) as per drawing no. HCD/SK-172 & technical specifications. 236 GIS Hall / BuildingDesign,Engineering including architectural & structural, supply of labour, material and construction of GIS building with ventilation system including crane hoisting system (EOT), equipment foundations as detailed in the bill of quantities under Annexure-1 of Section of bid/ contract documents , electrification including wiring, receptacle, modular switches, maximum 20W 4ft. long LED tubes with fittings minimum 1960 lumens, bulk head LED lights including fixtures, ceiling/ exhaust fans, stair case etc.interior & exterior acrylic emulsion, paint, RCC paving /plinth protection starting from the building upto1.5 m clear distance for the full length width of the building, closed drain around the building (i.e RCC Pipe)etc. complete in al lrespect for GI Shall / building and any other item not mentioned here in but required for completion of job as per specifications. The building should be equipped with fire detection system and shall be done by the succesfull bidder without any extra cost to employer.The building should be design to ensure early warning and prompt response in case offire. The system must include advance smoke detection system, advance heat detection system, audible and visual alarms alongwith alarm panels, fire extinguishers, fire buckets, warning signs, exit plans, etc complete in all order to run the system efficiently , wherever required as per latest IS Codal provision and in consultation with engineer incharge.220kV GIS Hall 237 DRAINAGE-CUM-RAIN HARVESTING SYSTEMSupply of labour, material for construction ofrecharge structures with bore well(s) as per HVPN drawings & specs. complete in all respect. The location of recharge structures shall preferably be located on corner(s) of the substation and shall be got decided from the concerned Engineer in-Charge on the basis of surroundings of the substation(s). In case ground water table is less than 8m from FGL, rain harvesting well shall not be constructed (the drainage system with sump pit is to be constructed as per item mentioned below). 238 The successful bidder shall evolve design & drawing for drains, manholes with RCC covers andsettlement tankincluding preparation of drainage layout drawing for disposal of rain water from building’s roof top & switch yard (s/stn.) area into respective bore well(s) in such a way that there shall be no ponding of water on the roof and switch yard (s/stn.). The layout so developed shall be got approved from the employer. The location of sump-pit-cum-pump chamber shall preferably be locatedon corner(s) of the s/stn. and shall be got decided from the concerned Engineer in-Charge on the basis of surroundings of the substation(s). The successful bidder will also supply labour and material for construction of sump-pit-cum-pump chamber as per HVPNL drgs. & provide one no. non clog pump(s) of 5HP of reputed make capacity with main switch, starter, volt meter, Amp. Mtr. etc. (for each sump pit) for disposal of excess water to outfall point. Any other item(s) not mentioned herein but is/are required for completion of works shall be done by the successful bidder without any extra cost to the employer.Drain Section-1 239 Drain Section-2 240 Drain Section-3 241 Road Crossing 242 Trench Crossing 243 Sump Pit Cum Pump Chamber 244 REMOVAL OF MALBARemoval/Disposal of malba irrespective of lead including loading & unloading etc. complete in all respect. Malba shall be disposed of to a suitable undisputed place outside the substation. as per Govt. norms. The successful bidder shall be responsible in case some dispute arise on account of disposal of malba/sludge at a disputed site. 245 CONSTRUCTION OF ANTI FIRE WALLConstruction of RCC anti fire wall of suitable height between T/F as per HVPNL drawing and all associated works including supply of labour, material, cement, reinforcement steel, steel form work etc. as per technical specification. 246 RCCM-20 inclusive of labour, material, shuttering, steel reinforcement etc. complete in all respects to compensate excess quantity required to be executed due to difference in existing ground level and the formation level to be fixed after contouring or difference on account of revised drawing issued at the time of construction and the tender drawing.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Haryana View Result →
40.
Educational and Research Institute #9196070 Technical Bid
Tender For Printing and Supply of Answer Sheets Library Books , Answer Sheets , Fundamentals Of Probability & Statisticss C Gupta & V K Kapoorsultan Chand & Sons , Introduction To Probability & Statisticsseymour Lipschutz & John Schillertata Mcgraw Hill Edition (Schaums Outlines) , Strength Of Materialsr . K. Rajputs Chand Publisher , Strength Of Materialsdr. B. C. Punmialaxmi Publication, New Delhi , Mechanics Of Materialsrc Hibblerpearson Education India , Hydraulics And Fluid Mechanics Including Hydraulics Machines Dr. P.N. Modi & S.M. Sethstandard Book House , Surveying, Volume-Idr. B. C. Punmialaxmi Publication, New Delhi , Surveying, Volume-Idr. K R Arorastandard Book House , Building Materialss K Duggalnew Age International Publisher , Iks: The Knowledge System Of Bharataprof. Bhag Chand Chauhangaruda Prakashan , Vedic Physicskeshav Dev Vermamotilal Banarasidas Publishers , Operations Researchj K Sharmatrinity Press (Imprint Of Laxmi Publications) New Delhi , Operations Researcher. P K Gupta & Dr. Ds Hiras. Chand & Company Pvt. Ltd., Ram Nagar New Delhi , Artificial Intelligence: Building Intelligent Systemsparag Kulkarni And Prachi Joshprentice Hall India Learning Private Limited , Theory Of Structures. Ramamrutham & S. Narayandhanpatrai Publication , Structural Analysis- Iss Bhavikattivikas Publishing House , Soil Mechanics And Foundation Engineeringb.C. Punmia, Ashok Kumar Jain & Arun Kumar Jainluxmi Publications , Soil Mechanics In Engineering Practicekarl Terzaghi, Ralph B Peck , Gholamreza Mesriwiley India Pvt Ltd , Soil Mechanics And Foundation Engineeringdr K R Arorastandard Publishers , Surveying, Volume-Iidr.B C Punimalaxmi Publication, New Delhi , Engineering Surveying-Vol-Iidr K R Arorastandard Publishers , Remote Sensing And Gisbasudeb Bhattaoxford University Press India , Fundamentals Of Remote Sensinggeorge Joseph And C Jeganathanthe Orient Blackswan , Remote Sensing And Image Interpretation, 6Th Editionchipman, Lillesand , Kieferwiley India Pvt Ltd , Building Constructionb.C. Punmia, Ashok Kumar Jain & Arun Kumar Jainluxmi Publications , The Text Book Of Building Constructions. P. Arora And S.P. Bindradhanpat Rai Publications , Reinforced Concrete Designdevdas Menontata Mcgraw Hill , Reinforced Concrete: Limit State Designa.K. Jainnem Chand & Brothers, Roorkee , Limit State Design Of Reinforced Concrete (As Per Is 456:2000)Bc Punmia, Ashok Kumar Jain And Arun Kumar Jainluxmi Publications , Structural Analysis- Iiss Bhavikattivikas Publishing House , Structural Analysisdevdas Menonnarosa Publication , Flow In Open Channelsk. Subramanyatata Mcgraw Hill , Open-Channel Hydraulicsven Te Chowthe Blackburn Press , Flow Through Open Channelskg Ranga Rajutata Mcgraw Hill , Water Supply Engineeringdr. B.C. Punmia, Er. Ashok K. Jain, Dr. Arun K. Jainlaxmi Publications , Environmental Engineering Water Supply Engineering - Vol.1Santosh Kumar Gargkhanna Publisher , Highway Engineeringkhanna & Justonem Chand & Bros , Principles And Practices Of Highway Engineeringl.R. Kadiyali, N B Lalkhanna Publisher , Advanced R C C Design (R C C Vol. 2)S.S. Bhavikattinew Age International Publishers , Design Of Reinforced Concrete Structuress Ramamruthamdhanpatrai Publication , Text Book Of Railway Engg.Sc Suxenadhanpatrai Publication , Airport Planning & Designkhanna & Aroranem Chand Publications , Environmental Engineeringhoward S. Peavy?Mcgraw Hill Education , Environmental Engineering Water Supply Engineering - Vol.Iisantosh Kumar Gargkhanna Publisher , Engineering Hydrologyk Subramanyamcgraw Hill , Engineering Hydrologyrajesh Srivastava And Ashu Jainmcgraw Hill , Hydrology: Principles, Analysis, Designhm Raghunathnew Age International Publishers , Fundamentals And Applications Of Rock Mechanicsdevashis Devphi Learning , Engineering And General Geologyparbin Singhsk Kataria & Sons , Engineering Geologysubinoy Gangopadhyayoxford University Press , Rock Mechanics For Engineersb P Vermakhanna Publishers , Concrete Technology, Theory And Practicem.S. Shetty & A.K. Jains. Chand Publisher , Concrete Technology, Theory And Practicess Bhavikattiik International Publishing House Pvt. Ltd. , Properties Of Concretenevillepearson Education India , A Textbook Of Fluid Mechanics And Hydraulic Machinedr R.K. Bansallaxmi Publications (P) Ltd , A Textbook Of Hydraulic Machinesr.K. Rajputs Chand & Co Ltd , Design And Drawing Of Steel Structuresss Bhavikattidreamtech Press , Design Of Steel Structures S K Duggalmcgraw Hill Education , Estimating And Costing In Civil Engineering Theory And Practiceb.N. Duttacbs Publishers And Distributors Pvt. Ltd. , Estimating, Costing, Specification And Valuation In Civil Engineeringm. Chakrabortim.K. Publishers And Distributors , Irrigation Engineering & Hydraulic Structuressk Gargkhanna Publishers , Irrigation And Water Power Engineeringbc Punmia, Ashok Kumar Jain And Arun Kumar Jainlaxmi Publications , Hydrology And Water Resource Engineeringsk Gargkhanna Publishers , Construction, Planning, Equipments And Methodspeurify And Schexnayder And Shapiratata Mcgraw Hill Higher Education. , Project Planning And Control With Pert And Cpmb.C. Punmia And K.K. Khandelwallaxmi Publications (P) Ltd , Solid And Hazardous Waste Managementm.N Raobs Publication , Dynamics Of Structuresa K Choprapearson Education , Earthquake Resistant Design Of Structuressk Duggaloxford University Press , Ground Improvement Techniquesb C Chattopadhyaya, J. Maityphi Learning , Environmental Impact Assessment Methodologiesanjaneyulu Yerramilli (Author), Valli Manickambs Publications / Bsp Books , Design Of Bridgesn Krishna Rajuoxford & Ibh Publishing Pvt Ltd , Essentials Of Bridge Engineeringd Johnson Victoroxford & Ibh Publishing Pvt Ltd , Handbook On Concrete Reinforcement And Detailingbureau Of Indian Standardsbureau Of Indian Standards , Geotechnical Engineering_: Principles And Practices Of Soil Mechanics And Foundation Engineeringv.N.S.Murthycbs Publishers And Distributors New Delhi , Limit Analysis And Soil Plasticitychencenage Learning India Edition , Soil Testing In Theoryand Practice Vol 11Geotechnical Testing And Instrumentationalam Singhcbs Publishers And Distributors New Delhi , Soil Lab Manauldascenage Learning India Edition , Principles Of Foundation Engineeringdascenage Learning India Edition , Principles Of Geotechnical Engineeringdascenage Learning India Edition , Textbook Of Geotechnical Engineeringdascenage Learning India Edition , Geotextiles-Emerging Trendsg. Venkatappa Rao & K Balankerala State Coir Crop., Allpazha , Reinforced Concretei.C. Syal And A.K. Goela.H. Wheeler And Co. Delhi , Reinforced Concrete Designs.N. Sinhatata Mcgraw Hill , Concrete Technologym.S.Shettys.Chand Publisher , Plasticity In Reinforced Concretechencenage Learning India Edition , Concret Lab Manaulm.L. Gambhirtata Mcgraw Hill , Concrete Lab Manaulbureau Of Indian Standardspublishing House New Delhi , Theory Of Beam-Columns, Volume 2: Space Behavior And Designchencenage Learning India Edition , Plain And Reinforced Concrete Vol.Iijai Krishna & O.P.Jainnem Chand & Bros Roorkee , Limit State Design And Reinforced Concretep.C. Vargheseoxford And Ibh Publishing Pvt Ltd , Design Of Reinforced Concrete Structuresm.L.Gambhirstandard Publishers Distributors , Properties Of Concretea.M.Nevillepearson Education India , Earthquake Resistant Design Of Structuresb.L. Guptastandard Publishers , Earthquake Resistant Design Of Structuresaggarwal And Shrikhandeprentice Hall Of India , Earthquake Resistant Building Constructionneelam Sharmas.K.Kataria And Sons , Earthquake Resistant Design Of Structuresagarwal Pstandard Publishers And Distributors , Analysis &Design Of Substructures (Limit State Design)Swami Saranstandard Publishers And Distributors , Geotechnical Engineeringc.Venkatramaianewage International Publisher, Newdelhi , Gate 2025-Civil Engineering-Gk Publications , Ese-2025 Preliminary Exam: Civil Engineering Objective Solved Paper Vol-1Made Easymade Easy Publications , Ese-2025 Preliminary Exam: Civil Engineering Objective Solved Paper Vol-2Made Easymade Easy Publications , Gate-2025: Civil Engineering Previous Year Solved Papersmade Easymade Easy Publications , Gate 2025-Civil Engineeringies Mastersies Masters Publications , A Handbook On Civil Engineeringmade Easy Editorial Boardmade Easy Publications , Civil Engineering For Competitionsr.Agorkhanna Publishers , Ssc-Je 2025 Civil Engineering Previous Years Topic Wise Objective Detailed Solution With Theoryies Master Teamies Master Publications , Ese 2025 Civil Engineering Topicwise Solved Paper-Iies Master Teamies Master Publications , Ese 2025 Civil Engineering Topicwise Solved Paper-Iiies Master Teamies Master Publications , Ssc Je Civil Conventional Papersies Master Teamies Master Publications , Ssc : Je Civil Engineering(2024) - Previous Year Conventional Solved Papers- 2Made Easy Teammade Easy Publications , Ese 2025 Mains Examination Civil Engg Conv Paper Imade Easy Teammade Easy Publications , Ese 2025: Mains Examination: Civil Engineering Conventional Paper - Iimade Easy Teammade Easy Publications , Gate 2025: Engineering Mathematics For Gate And Ese (Prelims)-Theory And Previous Year Solved Papersmade Easy Teammade Easy Publications , Gate 2025 : Reasoning & Aptitude For Gate And Ese (Prelims) - Theory And Previous Year Solved Papersmade Easy Teammade Easy Publications , General English For Gate And Psus: 2025Made Easy Teammade Easy Publications , Analysis Of Electric Machinery And Drive Systempaul C. Krause, Oleg Wasynczuk, Scott D. Sudhoffwiley , Generalized Theory Of Electrical Machinesp.S. Bimbhra,Khannapublishers,Delh , Power Electronics ( 7Th Edition (1 January 2022))P.S. Bimbhrakhanna Publishers , Power Electronics And Variable Frequency Drive- Technology And Applicationbose. B.K.Ieee Press, Standard Publisher And Distributors, 2001 , Digital Design,M. Morris Manoprentice Hall Of India , Modern Digital Electronicsr.P.Jain,Tmh , Engineering Circuit Analysiswiliamhayt And Jack Kemmerlytmh , Circuits And Networks- Analysis And Synthesisa.Sudhakar And S.P.Shyam Mohantmh , Electric Machineryfitzgerald&Kingsleymgh , Electrical Machineryp.S Bimbhrakhanna Publishers , Electrical Measurements And Measuring Instrumentsa.K. Sawhneydhanpat Rai & Co. , Power System Engineering | 3Rd Editiond. P. Kothari;I. J. Nagrathmcgraw-Hill; , Electrical Power Systems (Eighth Edition (1 January 2022))C L Wadhwanew Age International Private Limited , Modern Digital And Analog Communication Systemsb.P. Lathioxford , Communication Systemssimon Haykinwiley , Power Electronics ( 7Th Edition (1 January 2022))P.S.Bimbhrakhanna Publishers , Linear Control Systemb.S. Mankekhanna Publishers , Control System Engineeringm Gopal And I J Nagrathnew Age International Private Limited , Generation Of Electrical Energydr.B.R.Guptas.Chand , A Course In Electrical Powera.K. Chakrabathi,Soni Guptadhanpat Rai Publishier , High-Voltage Engineering | 6Th Editionbhatnagarmc-Graw Hill Education , High Voltage Engineering Fourth Edition (1 December 2020)C L Wadhwanew Age International Private Limited , Engineering Electromagnetichayttmh , Principles Of Electromagneticsmathew N.O Sadikuoxford , Thyristor Based Facts Controllers For Electrical Transmission Systemsr Mohan Mathur And Rajiv K Varmaajohn Wiley & Sons Inc. Publication , Understanding Facts: Concepts And Technology Of Flexible Ac Transmission Systemsnarain G. Hingoraniwiley India Pvt Ltd , Non-Conventional Energy Resources | 3Rd Editionb.H. Khanmcgraw Hill Education India Private Limited , Robotics And Controlr Mittle (Author), I Nagrathmcgraw Hill Education , A Course In Electrical Powerj.B Guptak Kataria& Sons , Microprocessor And Microcontrollerb Ramdhanpat Rai Publications , Microprocessor Architecture, Programming And Applications With The 8085 6/Eramesh Goankarpenram International Publishing India Pvt Ltd. , Modern Power System Analysis | 5Th Editiond P Kothari (Author), I J Nagrath (Author), R K Saketmcgraw Hill , Power System Analysisj.J. Grainger, W.D. Stevensonmc-Graw Hill Education , Fundamentals Of Electrical Drivesg.K. Dubeyalpha Science International Ltd, 2001 , Digital Signal Processing - 7Th Ednramesh Babuscitech Publications (India) Pvt. Ltd. , Digital Signal Processing : Principles, Algorithms, And Applications 4 Editiondimitris G Manolakis, John G. Proakispearson , Utilization Of Electric Energy: Including Electric Drives And Electric Tractiontarlok Singhs.K. Kataria & Sons , Art And Science Of Utilisation Of Electrical Energyh. Pratabdhanpat Rai & Co. , Electric Illuminationjohn O. Kraehenbueshljohn Wiley & Sons , Introduction To Artificial Neural Systemjacek M Zuradajaico Publishing House , Neural Network- Algorithm, Applicationsand Programming Techniquej.A. Freemanaddison Weley , Handbook Of Energy Auditsabbi, Y.P. And Jains.Teri Press, , Power Qualitybipin Singh Simmi P. Burmans.K. Kataria And Sons , Power Qualityc. Sankarancrc Press , Non-Conventional Energy Resourcesg.D Rai , Electrical Machine Designa.K. Sawhneydhanpat Rai , Power Station Designm.V. Deshpandephi Publication. , Testing , Commissioning , Operation And Meintenance Of Electrical Equipments. Raokhanna Publishers , Power System Planningr.L. Sullivantata Mcgraw Hill Publishing Company Ltd, 2012 , Power Electronics : Circuits Devices And Applicationsm.H. Rashidprencetice Hall Of India Ltd. , 2004 , Hp General Knowledge (3Rd Edition)Suresh Jokta And Vikash Kumarjokta Academy , Atomic Habitsjames Clearrandom House Business Books , Harry Potter Complete Book Seriesj.K.Rowlingharry Potter Books Set , Indian Gk 2024Lucentlucent Publication , Autobiography Of A Yogiparamhansa Yoganandayogoda Satsanga Society Of India , The Life Of Indira Nehru Gandhikatherine Frankharper Perennial , The Art Of Happinessdalai Lamahodder Paperbacks , Hitchhikers Guide To Galaxy Complete Setdouglas Adamspanmacmillan , The Great Gatsbyf.Scott Fitzgeraldvayu Education Of India , Hamletwilliam Shakespearemaanu Graphics , To Kill A Mockingbirdharper Leearrow Books Ltd , Pride And Prejudicejane Austenfingerprint! Publishing , 500Stephanie Meyermaclehose Press , The Subtle Art Of Not Giving A F*Ckmark Mansonharpercollins Publisher India Pvt Ltd , A Song Of Ice And Firegeorge R.R . Martinharpercollins Publisher India Pvt Ltd , Theory Of Everythingstephen Hawkingjaico Publishing House , Tomb Of Sandgeetanjali Shreepenguin Random House India Pvt. Ltd , The Lamplightersemma Stonexpicador Publishers , Mahasamar (1-9)Narendra Kohlivani Prakashan , The Palace Of Illusionschitra Banerjee Divakarunipicador India , Books By Premchand Complete Setprem Chandmaple Press , Bhagwat Geeta (Hindi)Iskconbhaktivedanta Book Trust , The Bhagwat Gita : Symphony Of The Spirit (Hindi)Rr Varmafingerprint! Publishing , Persuationjane Austonmaple Press , The Martianandy Weirballantine Books , Guiderk Narayanindian Thought Publications , Rich Dad Poor Dadrobert T. Kiyosakiplata Publishing , The Story Of My Lifehelen Kellerfingerprint! Publishing , 100 Great Business Ideasjeremy Kourdiembassy Books , The Worlds Best Business Ideasian Wallisjaico Publishing House , Idea To Executionnick Sonnerberglioncrest Publishing , Profit Firstmike Micholowiczportfolio Publisher , Surely Youre Joking Mr Feynmanrichard Feymanvintage Publishing , Side Hustlechris Guillebeaupanmacmillan , Invent It,Sell It,Bank Itlori Greinerballantine Books , Before You Start Uppankaj Goyalfingerprint! Publishing , The Secretrhonda Byrnesimon & Schuster Uk , Last Queenchitra Banerjee Divakaruniharpercollins Publisher India Pvt Ltd , How To Patent An Idea In Indiaprasad Karhadindependently Published , The Final Adventures Of Professor Shonkusatyajit Raypenguin Random House India , Sapiensyuval Noah Hararivintage Books , Shiva Trilogy Setamish Tripathiharpercollins Publisher India Pvt Ltd , A Thousand Splendid Sunskhaled Hosseinibloomsbury Paperbacks , Geetanjliravindernath Tagorerajkamal Prakashan Pvt. Ltd , Little Womenlouisa May Alcottvintage Childrens Classics , Sita : An Illustrated Retelling Of Ramanyadevdutt Patnayakpenguin India , The Girl Who Drank The Moonkelly Barnhillalgonquin Young Readers , The Perfect Murderruskin Bondrupa Publications India , Blue Umbrellaruskin Bondrupa Publications India , 7 Secrets Of Shivadevdutt Patnayakwestland Books , The Palace Of Illusionschitra Banerjee Divakarunipicador India , Jayadevdutt Patnayakpenguin India , My Gitadevdutt Patnayakrupa Publications India , Yoga Mythologydevdutt Patnayakharpercollins Publisher India Pvt Ltd , The Autobiography Of Benjamin Franklinbenjamin Franklinfingerprint! Pub , My Inventions: The Autobiography Of Nikola Teslanikola Teslaingram Short Title , The Immmortals Of Meluha (Hindi)Amish Tripathiharper Hindi , The Secret Of Nagas (Hindi)Amish Tripathiharper Hindi , Scion Of Ikshvakuamish Tripathiharpercollins Publisher India Pvt Ltd , The Oath Of The Vayuputras (Hindi)Amish Tripathiharper Hindi , War Of Lankaamish Tripathiharpercollins Publisher India Pvt Ltd , Sitaamish Tripathiharpercollins Publisher India Pvt Ltd , Raavan: Enemy Of Aryavartaamish Tripathiharpercollins Publisher India Pvt Ltd , Legend Of Suheldevamish Tripathiharpercollins Publisher India Pvt Ltd , Suheldev And The Battel Of Baharaichamish Tripathiharpercollins Publisher India Pvt Ltd , Immortal Indiaamish Tripathiharpercollins Publisher India Pvt Ltd , Dharma:Decoding The Epicsamish Tripathiharpercollins Publisher India Pvt Ltd , Dharmayoddha Kalki: Avatar Of Vishnukevin Missalfingerprint! Publishing , An Era Of Darknessshashi Tharooraleph Book Company , Foundationisaac Asimovharpervoyager , The Da Vinci Codedan Browncorgi Books , Deception Pointdan Browncorgi Books , 40 Rules Of Loveelif Shafakpenguin Random House India , Contactcarl Saganorbit Books , Elon Muskashlee Vancevirgin Books , Into The Wildjon Krakauerpanmacmillan , Shoe Dogphil Knightsimon & Schuster , The Upanishadsswami Paramanandaprakash Books India , Reflections: Swami Vivekanandaswami Vivekanandaom Books International , City Of Djinns: A Year In Delhiwilliam Dalrymplepenguin Books , The Age Of Kali: Indian Travels And Encounterswilliam Dalrymplepenguin India , The Power Of Your Subconscious Mindjoseph Murphysrishti Publishers & Distributors , Naruto, Volume 1Masashi Kishimotosimon & Schuster India , Naruto, Volume 2Masashi Kishimotosimon & Schuster India , Naruto, Volume 3Masashi Kishimotosimon & Schuster India , Buddhadeepak Chopraharpercollins Publisher India Pvt Ltd , Sophies Worldjostein Gaarderorion Publishing Group , Certificate Physical And Human Geography (Indian Edition)Goh Cheng Leong (Oxford University Press)Oxford University Press , A Brief History Of Modern India(2022 Edition)Rajiv Ahir (Spectrum Books Pvt. Ltd)Spectrum Books Pvt. Ltd. , Oxford Student Atlas For India(4Th Edition)Oxford University Pressoxford University Press , Answer Book,10001 Fast Facts About Our Worldhector Sierranational Geographic , Knowledge Encyclopedia Art And Architecturewonder House Bookswonder House Books , 1001 Inventions That Changed The World Since 26,00,000 Bcehachette Book Publishing India Pvt Ltdhachette Book Publishing India Pvt Ltd , National Geographic Know Your Worldnational Geographicimpulse Marketing, 609, Elegance Tower, Jasola District Center, New Delhi ,India , Introduction To Upanishadsacharya Prashantprashantadvait Foundation , Think On These Thingsj. Krishnamurtikrishnamurti Foundation India , Freedom From The Knownj. Krishnamurtikrishnamurti Foundation India , Bhagavad Gita ( English)A. C. Bhaktivedanta Swami Prabhupadbhaktivedanta Book Trust , Shrimad Bhagwat Geeta Yatharoop (Hindi)A.C. Bhaktivendanta Swami Prabhupadabhaktivedanta Book Trust , Advaita Vedantaswami Vivekanandaadvaita Ashrama, India , The Awakening Of Intelligencej. Krishnamurtikfi Publications , Private Life Of An Indian Princemulk Raj Anandharpercollins Publisher India Pvt Ltd , Gone With The Windmargaret Mitchelfingerprint! Publishing , In Search Of Schrodingers Catgribbin, Johnrhuk Publisher , Black Holes (L) : The Reith Lecturesstephen Hawkingbantam Books , Relativity: The Special And The General Theoryalbert Einsteinrupa Publications India , The Lord Of The Ringsj. R. R. Tolkienharpercollins Publisher India Pvt Ltd , The Time Machineh G Wellsfingerprint! Publishing , The Complete Novel Of Sherlock Holmesarthur Conan Doylefingerprint Publishing , Kashi Ka Assi(Hindi Edition)Kashinath Singhrajkamal Prakashan , White As Milk And Ricenidhi Dugar Kundaliapenguin Ebury Press , Jeevan Jine Ki Kalaanand Satyarthidiamond Books , Dhayan Sutraoshodiamond Books , Rashmirathi (Hindi Edition)Ramdhari Singh Dinkarlokbharti Prakashan Pvt Ltd , Akbar & His Indiahabib Irfanoxford University Press , How To Avoid A Climate Disasterbill Gatespenguine Books Ltd , The Uninhabitable Earth: Life After Warmingdavid Wallace-Wellspenguin Books Ltd , Blind Watchmakerrichard Dawkinspenguin Books Ltd , Dragon Ball Super, Vol. 1Akira Toriyamaviz Media Llc , Dragon Ball Z, (Vol. 1-Vol-5)Akira Toriyamaviz Media Llc , One Piece Vol 1 Comicauthor Eiichiro Odaviz Media, Subs. Of Shogakukan Inc , Death Note Black Edition, Vol. 1Takeshi Obata And Tsugumi Ohbasimon & Schuster India , Death Note Black Edition, Vol. 2Takeshi Obata And Tsugumi Ohbasimon & Schuster India , Death Note Black Edition, Vol. 3Takeshi Obata And Tsugumi Ohbasimon & Schuster India , Homo Deusyuval Noah Hararivintage Books , Do Epic Shitankur Warikoojuggernaut Books , Iron Widowxiran Jay Zhaorock The Boat Books , The Guiderk Narayanindian Thought Publications , Malgudi Daysrk Narayanindian Thought Publications , Cosmoscarl Saganabacus Books , Magic Of Realityrichard Dawkinstransworld Publishers Ltd , Greatest Show On Earthrichard Dawkinstransworld Publishers Ltd , The Origin Of Speciescharles Darwinfingerprint! Publishing , The Great Arcjohn Keyharper Press , Isro:A Personal Historyr. Aravamudanharpercollins Publisher India Pvt Ltd , The Dark Holds No Terrorsshashi Deshpandepenguin Random House India , That Long Silenceshashi Deshpandepenguin Random House India , Sister Of My Heartchitra Banerjee Divakarunipenguin Random House India , Vine Of Desirechitra Banerjee Divakarunilittle, Brown Book Group , The Forest Of Enchantmentschitra Banerjee Divakaruniharpercollins Publisher India Pvt Ltd , The Secretrhonda Byrnemanjul Publishing House , Women Who Run With The Wolvesclarissa Pinkolaballantine Books , You Are Born To Blossomapj Abdulkalamprabhat Prakashan , The Universe Always Has A Planmatt Kahnhay House Publishers India , That Long Silenceshashi Deshpandepenguin India , Silence: The Power Of Quiet In The World Full Of Noisethick Nhat Hanhrider & Co , A Thousand Splendid Sunskhalid Husseinibloomsbury Paperbacks , The Seeker Of Nothingkabir Munjalkabir Munjal , Three Thousand Stitchessudha Murtipenguin India , Shreemad Bhagwad Geeta Yatharth Geeta (Hindi)Swami Adgadanandshree Paramhans Swami Adgadanandji Trust , Project Hail Maryandy Weirballantine Books , Rafa :My Storyrafael Nadal, John Carlinlittle, Brown Book Group , Dawn Of The Rajranjit Mishrasrishti Publishers & Distributors , There Are Rivers In The Skyelif Shafakpenguin India , Ikigaifrancesc García, Héctor,Mirallesdiamond Books , Verity Collen Hoover Sphere Books Ltd , It Ends With Us Collen Hooveratria Books , Demon Slayer Volume 1-23Koyoharu Gotougeviz Media, Subs. Of Shogakukan Inc , The Brothers Karamazovfyodordostoevskyom Books International , The Hidden Hindu (Set Of 3)Akshat Guptapenguin Ebury Press , The Boy Who Did Not Sign Ashish Ranjan Notion Press , The Tell-Tale Brainv. S. Ramachandranpenguinerandon House India Pvt Ltd , Why Bharat Matters Dr. S Jaishankar Rupa Publications India , Behaverobert M Sapolskyvintage Books , Revolution 2020Chetan Bhagatrupa Publications India , Brain That Changes Itselfnorman Doidgepenguine Uk , Manav Samazrahul Sakratiyayanlokbharti Prakashan , Crime And Punishment Fyodor Dostoevskyom Books International , Tumhari Kshayrahul Sakratiyayanrahul Foundation , Dimagi Gulamirahul Sakratiyayansanage Publishing House , What Every Body Is Sayingjoe Navarrowilliam Morrow Paperbacks , R.A.W Hitman The Real Story Of Agent Limas.Hussain Zaidisimon &Schuster India , The Art Of Beingerich Frommrobinson Books , The 48 Laws Of Powerrobert Greeneprofile Books , Kane And Abeljeffry Archerpanmacmillan , Not A Penny More, Not A Penny Lessjeffry Archerpanmacmillan , As The Crow Fliesjeffry Archerpanmacmillan , The Fourth Estatejeffry Archerpanmacmillan , The Prisoner Of Birthjeffry Archerpanmacmillan , And Thereby Hangs A Talejeffry Archerpanmacmillan , The Hobbitj.R.R Tolkeinpanmacmillan , The Tibetan Book Of The Deaddalai Lamapenguin Classics , Chess Fundamentals J.R. Capablancagrapevine India , The Book Of 5 Ringsmiyamoto Musashishambhala Publications Inc , Think Like A Monkjay Shettyharpercollins Publisher India Pvt Ltd , The Diary Of Ceosteven Bartlettebury Publishing , The Art Of Being Alone Renuka Gavranimanjul Publishing House Pvt Lt , Lord Of The Rings (3 Set Of Box)J.R.R Tolkeinharpercollins Publisher India Pvt Ltd , Angels And Demonsdan Browncorgi Books , Infernodan Browncorgi Books , The Lost Symboldan Browncorgi Books , Digital Fortressdan Browncorgi Books , Origindan Browncorgi Books , Mortal Enginesphilip Reevescholastic Corporation , Indias Most Fearless Vol 1Shiv Aroor And Rahul Singhpenguin Random House India , Predators Goldphilip Reevescholastic Corporation , Infernal Devices Vol-Iphilip Reevewalker Books , Steve Jobs Biographywalter Issacsonlittle, Brown Book Group , Assistant Commandant :Capf (Hindi) Drishti Drishti , Airbus Vs Boeing Rajat Narang Notion Press , Percy Jackson( 5 Book Set)Rick Riordanpuffin Books , Heros Of Olympus( 5 Book Set)Rick Riordanpuffin Books , Vishwadarshan, A Glimpse Of The Universemahatma Ramratna Thapaliyalfingerprint! Publishers , How To Win At Chess: The Ultimate Guide For Beginners And Beyondlevi Rosmanpenguine Random House India , The Descent Of Air Indiajitendra Bhargavjitendra Bhargav , The Science Of Mind Management Swami Mukundanandarupa Publications , The India Ways. Jaishankar Harpercollins Publisher India Pvt Ltd , India That Is Bharatj Sai Deepak Bloomsburry India , The 5Am Clubrobin Sharmagoyal Prakashan , The Laws Of Human Naturerobert Greeneprofile Books , Karma : A Yogis Guide To Crafting Your Destiny Sadhgurupenguin Publisher , Mindset : How Can You Fulfill Your Potentialcarol S. Dweckconstable And Robinson Ltd , The Mountain Is You Brianna Wiestamaryllis (An Imprint Of Manjul Publishing House) , Sky High The Untold Story Of Indigo Airlines Tarun Shuklaharper Businesses , The Compound Effectdarren Hardymanjul Publishing House , Dopamine Detoxthibaut Meurissewisdom Tree India , Think Straight Darius Forouxpenguin Random House India Ltd , Deep Work Cal Newport Piatkus Publication , Do It Todaydarius Forouxpenguin Random House India Ltd , When Things Fall Apartpema Chodronmaple Press Pvt Ltd , My Life And Work Henry Ford Maple Press Pvt Ltd , Twisted Series 4 Book Setana Huangboba Press , White Nightsfyodor Dostoyevsky Penguin Random House India Ltd , Murder In The Familycara Hunterharpercollins Publisher India , One Arranged Murderchetan Bhagatharpercollins Publisher India , The Lost Bookshopevie Woodsone More Chapter Books , The Pumpkin Spice Cafélaurie Gilmoreone More Chapter Books , The Midnight Librarymatt Haigcanongate Books , Butcher And Blackbirdbrynne Weaverlittle, Brown Book Group , A Court Of Thorns And Rosessarah J. Maasbloomsbury Publishing , The Bell Jarsylvia Path Rupa Publications , Good Girl Bad Bloodholly Jacksonharpercollins Publisher India , Icebreakerhannah Gracecoleen Hoover Books
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Himachal Pradesh View Result →
41.
Educational and Research Institute #9043537 Technical Bid
Laboratory Setup Of H.S.-Vocational Including Supply, Installation & Commissioning Of Tools/Equipment/Instruments Etc. For Implementation Of Vocational Education In West Bengal Notice Inviting Etender For Laboratory Setup Of H.S.Vocational Including Supply, Installation And Commissioning Of Tools, Equipment, Instruments Etc. For Implementation Of Vocational Education In West Bengal. , Automobile Technology (Etat): , Four Stroke Petrol Engine With Cng Setup-Working Condition , Diesel Engine – Crdi - 4 Strokefor Dismantling And Assembling With Swiveling Stand. , Disk Brake In Working Condition With Caliper Assembly With All Parts , Drum Brake Assembly In Working Condition , Cut Section Working Model Of Automatic Transmission Gear Box , Radiator Cut Section-Cross Flow , Cut Section Working Model Of Single Plate Clutch Assembly , Cut Section Of Cross Ply And Radial Tyres , Tyre Pressure Gauge With Holding Nipple , Vernier Calliper , Different Type Of Piston Model , Spanner, Ring Set Of 12 , Philips Screw Driver Set Of 5 Pieces , Fuel Feed Pump For Diesel , Piston Ring Compressor , Piston Ring Expander And Remover. , Outside Micrometer , Automotive Oil Pump For Dismantling And Assembling. , Valve Lifter , Carburetor – Solex, , Calliper Inside With Spring , Callipers Outside With Spring , Pliers Combination , Gasket Cutter , Circlip Pliers Expanding And Contracting , Dividers With Spring , Hammer Ball Peen , Hammer Mallet , Hammer Plastic , Feeler Gauge 20 Blades (Metric) , Hydraulic Jack Hi-Lift Type , Two Wheeler (Refurbished) , Demonstration Board Of Mpfi System , Work Bench , Torque Wrenches Set , Battery –Charger , Battery Charger , Spanners Socket With Speed Handle, T-Bar, Ratchet And Universal Set Of 28 Pieces With Box , Spanner D.E. Set Of 12 Pieces , Steel Tool Box With Lock And Key (Folding Type) , Allen Key Set Of 12 Pieces , Grease Gun , Electric Soldering Iron , Hacksaw Frame Adjustable , Hammer Ball Peen With Handle , Electrician Screw Driver , Flat File , Second Cut , File Flat , Bastard , Hands File For Second Cut Flat , Spanner, Adjustable , Scriber , Building Construction Maintenance (Etbc) : , Digital Compression Testing Machine , Theodolite Transit Latest Model With All Accessaries , Aggregate Impact Tester With Cylindrical Cup And Measuring Cylinder , Auto Level Latest Model With All Accessaries , Hand Gps-Latest Version , Mortar Cube Vibrator , Aggregate Crushing Value Apparatus , Concrete Mixer , Dumpy Level , Manual Bar Bending Machine Of Suitable Size , Bulk Density Apparatus (Cylindrical Measure For Fine Aggregate And Coarse Aggregate ) , Turbidity Test Kit , Power Cutter Of Suitable Size , Box Sextant , Planimeter , Plane Table With Stand, Accessories & Water Proofing Cover , Weighing Plateform Digital , Vicat Apparatus With Plunger, Needles And Mould , Standard Is Sand , Oven , Electronic Balance , Tile Cutter , Bar Bending Table , Drill And Bit Set , Ratchet Rack , Mortar Board , Metal Cross Staff- Box Type , Telescopic Alidade , Slump Test Apparatus With Temping Rod , Water Testing Kit – For Ph Value , Thickness And Length Gauges (Elongation And Flakiness Index) , Plumbers Metal Melting Pot , Metal Cross Staff- Open Type , Ratchet Pipe Die , Tap And Die Set To Cut Bsp Thread , Height Indicators , Metric Chain- , Prismatic Compass With Stand And All Accessaries , Chain Pipe Wrenches , Engineers Chain , Sieve For Sand In Adjustable Stand , Optical Square , Mortar Board , Slump Cone , Is Brass Sieves - Set , Stillson Pattern Pipe Wrenches , Pipe Vice To Grip Pipes Up To , Drawing Board , Brushes For Painting , Leveling Staff – , Ranging Rod Steel , Offset Rod , Measuring Cylinder , Pick Axe , Pyconometer For Specific Gravity , Pickaxe. , Le Chatelier Mould (For Soundness Test Of Cement) , Survey Plotting Scale- , Mason Square , Tenon Saw, Dovetail Saw , Le Chateliers Flask (For Specific Gravity Testof Cement) , Monkey Plier (Gas Pliers) , Aluminum Float , Tool Caulking , Flat Smithy Tong. , Saw Plumber , Stop Watch , Screw Driver Set , Land Measuring Steel Tape , Brick Hammer With Handle , Crow Bar , Cube Mould , Spanner Monkey , Stilson Wrench , Land Measuring Plastic Tape , Shovel , Spade , Telescopic Pipes / Props , Mason Plumb Rule With Spirit Level , Trowel , Plumb Rule And Bob , Non Porous Plate , Graduated Cylinder , Adjustable Spanner , Double Face Hammers , Hacksaw Frame Adjustable , Level Spirit Wooden , M.S Pan , Bucket G.I. , Sprit Level , Bolster , Bevel , Wooden Mallet , Gauging Trowel , Sampling Scoops , Plumbers Ladle , Trowel 125 , Farma Of Mild Steel For Measuring Aggregate , Masonry Grinder , Cutter, Pipe Wheel Type , Caliper Outside , Steel Tapes , Hammer Ball Peen , Cutting Pliers , Inside Caliper , Pointing Trowel , Steel Float , Measuring Tape , Bar Bending Lever (Suitable Diameter And Length) , Float Wooden , Chiesel , Plumb Bob , Bending Pipes (Suitable Diameter And Length) , Line Pin Corner Block , Wire Brushes , Bending Pipes , Total Station Latest Model With All Accessaries , Dgps-Latest Version , Motorised Sieve Shaker , Floor Polishing Machine , Concrete Vibrator , Electric Drilling Machine , Power Operated Cutting Machine , Vibrating Machine , Portable Hand Bender Of Suitable Size , Spray Painting Machine , Drums , Polishing Machine , Abney Level , Electric Heater , Computing Scales Five Hectares , Gunters Chain , Offset Scale For Cadastral Survey , Computing Scales Two Hectares , Indian Pattern Clinometers , Telescopic/ Adjustable Spans , Straight Edge , Steel / Plywood Shuttering Plates , Hammer 5 Kg , Water Tube , Hammer 1 Kg , Magnifying Glass , Marking Rope & Thread , Chisel Cold Flat , File Flat Rough , Electrical Maintenance And Installation (Etem) : , Washing Machine , Ac Motor Trainer Kit , Mixer Cum Grinder , Soldering & De-Soldering Station , Megger – , Geyser , ½ Hpinduction Motor Three Phase , Wooden Panel Board With Following Accessories: , Electric Power Drill – , Clamp On Meter: , Vacuum Cleaner , Multimeter- , ¼ Hpinduction Motor Single Phase , Tpic With Neutral Main Switch – , Hand Drill Machine Electric With Hammer Action , Single Phase Energy Meter – , Sodium Vapour Lamp , Mercury Vapour Lamp , Steam Iron Automatic , Electric Rice Cooker , Dol Starter , Adjustable Wrench , Screw Driver Set , M.C.B – , Bench Vice , Wooden Board For Wiring – , Insulated Combination Plier (Heavy Duty ) – , Dpic Main Switch – , Spanner Set , Cable Cutting Pliers , Analog Multi-Meter , Dol Starter , Cutting Pliers – , Tools Maker Vice , Soldering Iron – , Crimping Tool(Pliers) , Ring Spanner – , Screw Driver Set , Precision Set Of Screwdrivers , M.C.B – , Adjustable Wrench – , Hacksaw Frame Adjustable , De-Soldering Pump Electricalheated, Manual Operators , Insulated Combination Pliers , Insulated Side Cutting Pliers , Insulated Screw Driver , Insulated Combination Plier (Heavy Duty ) , Earthing Rod With Chain, Fish Wire , Electric Bell , File Flat Second Cut , Distribution Box 4-Way , File Flat Bastard , Handsaw450mm , Soldering Iron Changeable Bits , Ball Pin Hammer – , Spirit Level , 3-Pin 16A Wall Socket, Flushtype , Plier-Flat Nose , File Flat Smooth , 3-Pin 16A Wall Socket, Mounting Type , Ceiling Rose 6A, 250V 2Plate , Chisel-Cold-Flat , Fuse – , Hammer Ballpen , Fan Regulator , 3-Pin 6A Wall Socket, Flushtype , Continuity Tester , Hacksaw With Frame Adjustable , Wooden Saw , Combined Led Or Fluorescent Tube , Fuse – , Standard Wire Gauge , I.C.T.P. Switch16a400v , S.P. Switch 6A, 250 V Mounting Type Two-Way , S.P. Switch Flush Type Two Way , 3-Pin 6A Wall Socket ,Mounting Type , 2-Pin 6A Wall Socket, Flushtype , I.C.D.P. Switch16a250v , I.C. Cut Out 16A, 250V , Intermediate Switch 6A, 250V , 2-Pin 6Amountingtype , S.P. Switch 6A, 250V Mounting Type Single Way , Kit-Kat Fuse , Brass Pendent-Holder , S.P. Switch Flush Type, Single Way , 3-Pin16a250vplug , Bell-Push/Switch 6A,250Vmountingtype , Hrc Fuse-16A , Pvc Cu Wire – , Terminal Plate 16A 250 V3-Way - , Bell-Push/Switch 6A, 250V Flush Type , Gi Junctionbox-1,2,3&4Way Square Type , Bakelite Pendent-Holder , 3-Pin 6A 250Vplug , Toggleswitch6a , Neutral Link 16Amps , Gi Conduit Pipe , Pvc Channel , Pvc Pipe Coupling , Pvcjunctionbox-1,2,3And4 Way , Pvc Bend , Pvc Elbow , Pvc Tee , Gi Conduit Coupler & Inspection Coupler , Gi Elbow & Inspection Elbow- , Tees & Inspection Tee , Pvc Casing For Wiring – , Pvc Conduit Pipe , Solar Photo-Voltaic Cell: Solar Power Generation: , Storage Battery , Complete Set Up Of Single Crystalline Silicon Pv Cell , Pyranometer , Solar Street Lighting , Solar Home Lighting System With All Necessary Components For Student Demonstration. , Data Logger , Concentrated Solar Collector , Flat Type Solar Collector , Solar Cooker , Pvc / Xlpe Low Tension Cable Jointing Kit , D.C Shunt Motor , Three Phase Energy Meter – , Voltage Stabilizer , Room Heater , 4-Point Starter , Tools Makers Vice , Tubular Box Spanner , Magneto Spanner Set , Led Lamp – , Allenkey Set(Hexagonal Setof 9) , Insulator Model , Insulator Model , Insulator Model , Round Nosepliers , Allen Key Screw Driver , Connecting Screwdriver , Steel Rule Graduated Both In Metric And English Unit , Long Nose Pliers – , Micrometer , Steel Measuring Tape , Hammer Ball Pen , Neon Tester , Pvc Cable & Xlpe Cable: , Iron Connector-5A , Food And Nutrition (Hsfn) : , Solar Drier Of Lab Model , Potato Peeler, Abrasions Method , Sterilization Tank,Laboratory Mode , Tray Dryer, Horizontal Cross Air Flow System , Hot Air Oven (24’’×24’’×24’’) Inch Size , Concentric Ring Water Bath , Crown Corkingmachine , Digital Electronics Balance, Capacity : 5Mg-210 G , High Precision Balancecapacity=1000 G , Juice Extractor , Anthropometric Rod , Skinfold Calipar , Digital Ph Meter, Range : 0 To 14Ph , Rectangular Hot Plate Of, (10’’×16’’×9’’) Inch Size , Vegetable Slicer, Hand Operated Laboratory Model , Serological Water Bath , Mixer Grinder , Can Cutter / Opener , Iron Shelves , Magnetic Starrer, With Hot Plate , Electric Heater, 1500W , Digital Thermometer , Fibre Glass Tape , Straw Immersion Tank, , Thermometer,0°C To 100 ° C , Pipette, Graduated, Borosilicate Glass 25Ml , Glass Rod 150 Mm Long, 5-6 Mm Diaborosilicate Glass , Beaker, Graduated, Borosilicate Glass 1000Ml , Conical Flask, Graduated, Borosilicate Glass 1000Ml , Pipette, Graduated, Borosilicate Glass 10Ml , Porcelain Basin100 Mm Dia , Beaker, Graduated, Borosilicate Glass 500Ml , Paddy Straw , Volumetric Flask, Graduated, Borosilicate Glass 1000Ml , Measuring Cylinder ,Graduated, Borosilicate Glass 500Ml , Beaker, Graduated, Borosilicate Glass 250Ml , Burette 50Ml , Graduated , Borosilicate Glass(With Ptfe Stoppered), , Conical Flask, Graduated, Borosilicate Glass 100Ml , Measuring Cylinder ,Graduated, Borosilicate Glass 250Ml , Test Tube ,Borosilicate Glass 15X15 Ml , Volumetric Flask ,Graduated, Borosilicate Glass 500Ml , Measuring Cylinder ,Graduated, Borosilicate Glass 100Ml , Test Tube ,Borosilicate Glass 18X15 Ml , Beaker, Graduated, Borosilicate Glass 100Ml , Bmi Chart. , Pipette, Graduated, Borosilicate Glass 2Ml , Volumetric Flask ,Graduated, Borosilicate Glass 100Ml , Volumetric Flask ,Graduated, Borosilicate Glass 250Ml , Measuring Cylinder ,Graduated, Borosilicate Glass 25Ml , Beaker, Graduated, Borosilicate Glass 50Ml , Measuring Cylinder ,Graduated, Borosilicate Glass 10Ml , Funnel 60 Deg Angle Long Stem , Borosilicate Glass 75Mm , Volumetric Flask ,Graduated, Borosilicate Glass 10Ml , Aspirator Bottle With Stopcock Material :Pp , Capacity10000ml , Basket Plastic, Large Size , Basket Plastic, Medium Size , Beaker, (Plastic)Graduated, 1000Ml , Beaker, (Plastic)Graduated, 100Ml , Beaker, (Plastic)Graduated, 250Ml , Beaker, (Plastic)Graduated, 500Ml , Beaker, (Plastic)Graduated, 50Ml , Blotting Paper Roll 100 Piece , Bottle Washer Brush Bigsize , Bottle Washer Brush Small Size , Brown Paper Roll 100 Piece , Bunsen Burner, Brass Made, With Regulator , Burette Cleaning Narrow Brush Long Size , Burette Stand With Base And Double Clamp, (Plastic Pp Made) , Butter Paper Roll Of 100 Piece , Cooking Pan 5 Lit , Cutting Knife , Big Size , Cutting Knife , Medium Size , Cutting Knife , Small Size , Dekchi,2 Lit,Ss , Dekchi,5 Lit,Ss , Different Standard Referral Charts Depicting Indian Height Weight, Muac, Cc, Hc, Skinfold Thickness. , Disk (Thala), Ss, 1No , Drum With Cover, Ss, 10 Lit , Drum With Cover, Ss, 15 Lit , Evaporating Disk Of 90 Ml. , Filter Paper , Filter Stand With Base And Double Clamp, (Plastic Pp Made) , Filtering Flask And Glass Funnel With Sinter Of Pore Size G0 And G1 Fitted With Rubber Cork 1000 Ml , Funnel Material :Pp, 75Mm , Gamla 2Lit Ss , Gamla 5 Lit Ss , Gas Oven Double , Glass Bead, 500 Gm , Glass Bottle With Cap For Fruit Juice, Sauce Etc. 500Ml , Glass Jar With Steel Lid, 1Kg , Glass Jar With Steel Lid, 2Kg , Growth Chart , Heat Resistance Cloves Pair , Index Charts Like- Rao And Singh’S Weight Height Ratio, Kanawati Index, Broka’S Index, Quetlet Index. , Inoculation Needle With Nicrome Wire, Best Quality , Jug, Ss, Medium Size , Khunti, Kitchen Std,Ss, Medium Size , Ladle, Big Size , Kitchen Std,Ss , Litmus Paper, Blue,,10 Bks , Litmus Paper, Red ,10 Bks , Measuring Cups, Weighing Machine For Weighing Food, Charts Of Food Groups, Portion Sizes, Nutrient Sources. , Micro Spatula Ss 8” Long ,Ss , Mortar/ Pestle(Porcelain) 100 Mm , Muslin Cloth White , Normal Karai, 3Lit, , Normal Karai, 5Lit, , Ordinary Filter Paper, 125Mm Dia , Petridish , Borosilicate Glass 80X17mm , Ph Buffer Capsule/Tablet, 10 Caps In Each Pack,( Ph 4, Ph 7, Ph 9.2) , Ph Paper , Ph Paper,1.00-14.00, 10 Bks , Pipette Jacket, Ss Made , Pipette Stand(Plastic Pp Made)(Horizontal) , Pipette Stand(Plastic Pp Made)(Vertical) , Plasticbati, 1000 Gm , Plasticbati, 500 Gm , Plastic Bati 200 Gm , Plastic Bucket, 11Lit , Plastic Bucket, 7Lit , Plastic Bucket, 9Lit , Plastic Jar With Lid, 2 Kg , Pot (Bati),Ss,1No , Pot (Bati),Ss,2No , Pot (Bati),Ss,3No , Pressure Cooker,10Lit Capacity , Reagent Bottle,Borosilicate Glass 250Ml , Reagent Bottle,Borosilicate Glass 500Ml , Sessios Ss Of High Quality 10” Long , Sieves, Ss, Medium Size , Spirit Lamp Ss With Brass Cover125ml , Spoon Spatula 10’’ Long ,Ss , Spoon Spatula 8’’ Long ,Ss , Strainer With Handle, Ss,Big Size , Strainer With Handle, Ss,Medium Size , Table Spoon (Large), Ss , Table Spoon (Medium), Ss , Teaching Board, Felt Board, Flash Card, Flannel Graph. , Teaspoon , Std Size, Ss , Test Tube Holder (Heavy) , Test Tube Stand (Plastic Pp Made) Dia16mm , Test Tube Stand (Plastic Pp Made) Dia25mm , Test Tube Stand (Plastic Pp Made) Dia20mm , Tray ,Plastic, (12’’×10’’) , Tray ,Plastic, (17’’×12’’) , Tray ,Plastic, (19’’×13’’) , Tray,Ss4 No, With Handle , Tripod Stand, Iron Made Properly Nickel Coating , Wash Bottle, (Plastic), 500 Ml , Blanching Unit (Ss Made) With Steam Charging, . Lab Model , Horizontal Laminar Air Flow Chamber Laminar Flow (Horizontal ) , Flange Rectifier Machine Hand Operated , Single Distilled Water Distillation Apparatus,Quartz Made , Can Vacuum Gauge , Can Pressure Gauge , Weighing Machine , Fruit Juicer Cum Mixer Grinder , Salter Scale , Laboratory Type Foil Sealing Machine , Hand Refractometer, With Three Range 29-62% Brix , Hand Refractometer, With Three Range 0-32% Brix , Conical Flask, Graduated, Borosilicate Glass 500Ml , Conical Flask, Graduated, Borosilicate Glass 250Ml , Aspirator Bottle With Stopcock Material :Pp , Capacity20000ml , Burette Stand With Base And Singleclamp, (Plastic Pp Made) , Cooking Pan 3 Lit , Culture Tubes, Round Bottom With Screw Cap And Teflon Liner, , Culture Tubes, Round Bottom With Screw Cap And Teflon Liner, Made From Heat Resistant Low Expansion Borosilicate Glass, 30Ml , Dekchi,10 Lit,Ss , Flat Spatula 10’’ Long ,Ss , Flat Spatula 4’’ Long ,Ss , Gamla 10Lit Ss , Glass Filter For Vacuum Filtration Borosilicate Glass: , Glass Jar With Tin Cap For Fruit Juice, Sauce Etc. 250Ml , Handypette Pipette Aid (Pipette Sacker) 25Ml (Plastic) , Induction Cooking Store For Cooking Demonstration. , Micro Spatula Ss 6’’ Long, Ss , Micro Tip Box :Pp , Capacity 200-1000 ?L , Micro Tip Material :Pp , Capacity 0.2-10 ?L , Micro Tip Material :Pp , Capacity 200-1000 ? , Micro Tip Material :Pp Capacity 2-200 ?L , Mortar/ Pestle(Porcelain) 150 Mm , Petridish , Borosilicate Glass100x17mm , Plastic Jar With Lid, 1 Kg , Rubber Gloves 14 No, Pair , Sessios Ss Of High Quality 8” Long , Tray,Ss2 No , Wire Gauge With Asbestos , Wire Gauge Without Asbestos
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
West Bengal View Result →
42.
Public Administrative Department #8955611 Technical Bid
Supply, Installation And Maintenance Of Online Continuous Effluent Monitoring System ( Ocems ) I.E. Ph, Bod, Cod, Tss And Flow Along With Data Transfer To Cpcb And Rspcb Server For Running 2 Mld Pilani Road Stp For Outlet , Supply & Installation Of On Line Bod / Cod / Tss / Ph In-Situ Based Analyzer With Panel For S.T.P Effluent Measurement Items Uv-Vis Spectrometry Double Beam With Entire Spectrum Scanning 200 – 720 Nm / 190- 750Nm Wave Lengths Along With 256 Unique Pixel Diode. •Moc Of Bod / Cod / Tsssensor-Titanium 3.7 / Ss316l Or Better • Cleaning Facility.-Ultrasonic Cleaning Or Air Pressure Cleaningaccuracy Of Bod / Cod / Tss Sensor- + / -3% Of The Measured Value • Light Source: Xenon Flash Lamp Following Measuring Ranges Are Required : • Cod: 0-700 Mg / Lbod: 0-400Mg / L Tss:0-600Mg / L Ph Range - 0 To 14 • Moc Of Ph Sensor-Stainless Steel 316 Or Better •Ph Accuracy + / -0.2% •Protection Type : Ip 68 For Both The Sensor And Cable ( Cable Lengthaspersiterequirement ) Controller / Display-Housing Material – Noncorrosive E.G.Acrylonitrile-Styrene-Acryloesterpolymer Orbetter • Protection Rating Ip 67 Controller / Display Cabin Box Should Be Ip66 Grade With Lock & Key Ss304 Grade Moc , Data Logger ( Including Data Transmission To Cpcb And Rspcb ) , Internet For Data Transmission Is In Bidders Scope. •The Communication To The System Should Be Two Way.The Data Should Be Received At A Central Location And Should Be Displayed There In Real-Time In Graphical And Tabular Format. • Operating Temperature 0 To 55 °C • Protection Surge Protection On Sensor Inputs, Over Voltage And Reverse Polarity Protection On Power Input• Storage 256Mb ( Industrial Microsd ) • Interface ( S ) 2 X Eia Rs485, 1 X Rs232, 8 X 4-20Ma ( ±1% Fs ) • Usb Host 1 ( Usb 2.0 ) • Voltage 9-24 Vdc ± 10% ( Nominal 12Vdc ) Power 5W ( Peak ) • Statistical Data Analysis ( Customizable ) For Average, Min., Max., Diurnal Variation.•Auto Report And, Auto Mail Generation Etc. • Comparison Of Parameters Of Different Locations In User Selectable Time Formats I.E. In Graphical And Tabular Formats Compatible To Ms Excel, Ms Word, *.Txt Etc. Including Mandatory Fee For Data Transmission To Cpcb, Rspcb & Mcb Server ( Whenever Payable ) . , Ultrasonic Open Channel Flow Meter With Shall Comprise Of Flow Sensor / Transducer, Flow Transmitter, Digital Level Indicator / Remote Indicator, Control Unit • Operating Temperature: 0 To 50°C.• Safety: Explosion Proof Or Intrinsically Safe. • Measuring Principal: Ultrasonic.• Communication Protocol: Open Protocol Like Modbus, Profibus, Hart, Etc.• Analog Output: Isolated 4-20Ma.• Relay Contacts: Minimum Of 3 Spdt Contacts.• Accuracy: ± 0.25% Of Measured Value Or Better. •Output-. 4 - 20 Ma •Protection A. ) Sensor: Ip-68. B. ) Transmitter / Controller: Ip-66 ( Nema 4X ) .•Display: Lcd With Led Backlighting 130 , 1Kva Ups • Capacity -1000Va / 600W • Input Voltage Range- 140 V ~ 300 V Ac Frequency - 50 Hz ± 10% • Operating Temperature- 0°C-40°C; • Charging Time -6~8 Hours Recover To 90% Capacity Batteryrating-Smf12v / 7Ahx2 Batteries. • Output Voltage -230 V Ac Nominal Transfer Time-Typical4~8Ms•Type-Sealed Maintenance Free , Comprehensive Operation & Maintenance Cost For Whole System For 1St Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibrationofsysteminayear, Repairable Cost, Replacement Cost, Consumables Etc. , Comprehensive Operation & Maintenance Cost For Whole System For 2Nd Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibration Of System In A Year, Repairablecost, Replacementcost, Consumables Etc. , Comprehensive Operation & Maintenance Cost For Whole System For 3Rd Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibration Of System In A Year, Repairablecost, Replacementcost, Consumables Etc. , Comprehensive Operation & Maintenance Cost For Whole System For 4Th Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibration Of System In A Year, Repairablecost, Replacementcost, Consumables Etc. , Comprehensive Operation & Maintenance Cost For Whole System For 5Th Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibration Of System In A Year, Repairablecost, Replacementcost, Consumables Etc. , Installation Charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Rajasthan View Result →
43.
Public Administrative Department #8955605 Technical Bid
Work No 02 Supply, Installation And Maintenance Of Online Continuous Effluent Monitoring System ( Ocems ) I.E. Ph, Bod, Cod, Tss And Flow Along With Data Transfer To Cpcb And Rspcb Server For Running 3 Mld Mandrella Road Stp For Outlet , Supply & Installation Of On Line Bod / Cod / Tss / Ph In-Situ Based Analyzer With Panel For S.T.P Effluent Measurement Items Uv-Vis Spectrometry Double Beam With Entire Spectrum Scanning 200 – 720 Nm / 190- 750Nm Wave Lengths Along With 256 Unique Pixel Diode. •Moc Of Bod / Cod / Tsssensor-Titanium 3.7 / Ss316l Or Better • Cleaning Facility.-Ultrasonic Cleaning Or Air Pressure Cleaningaccuracy Of Bod / Cod / Tss Sensor- + / -3% Of The Measured Value • Light Source: Xenon Flash Lamp Following Measuring Ranges Are Required : • Cod: 0-700 Mg / Lbod: 0-400Mg / L Tss:0-600Mg / L Ph Range - 0 To 14 • Moc Of Ph Sensor-Stainless Steel 316 Or Better •Ph Accuracy + / -0.2% •Protection Type : Ip 68 For Both The Sensor And Cable ( Cable Lengthaspersiterequirement ) Controller / Display-Housing Material – Noncorrosive E.G.Acrylonitrile-Styrene-Acryloesterpolymer Orbetter • Protection Rating Ip 67 Controller / Display Cabin Box Should Be Ip66 Grade With Lock & Key Ss304 Grade Moc , Data Logger ( Including Data Transmission To Cpcb And Rspcb ) , Internet For Data Transmission Is In Bidders Scope. •The Communication To The System Should Be Two Way.The Data Should Be Received At A Central Location And Should Be Displayed There In Real-Time In Graphical And Tabular Format. • Operating Temperature 0 To 55 °C • Protection Surge Protection On Sensor Inputs, Over Voltage And Reverse Polarity Protection On Power Input• Storage 256Mb ( Industrial Microsd ) • Interface ( S ) 2 X Eia Rs485, 1 X Rs232, 8 X 4-20Ma ( ±1% Fs ) • Usb Host 1 ( Usb 2.0 ) • Voltage 9-24 Vdc ± 10% ( Nominal 12Vdc ) Power 5W ( Peak ) • Statistical Data Analysis ( Customizable ) For Average, Min., Max., Diurnal Variation.•Auto Report And, Auto Mail Generation Etc. • Comparison Of Parameters Of Different Locations In User Selectable Time Formats I.E. In Graphical And Tabular Formats Compatible To Ms Excel, Ms Word, *.Txt Etc. Including Mandatory Fee For Data Transmission To Cpcb, Rspcb & Mcb Server ( Whenever Payable ) . , Ultrasonic Open Channel Flow Meter With Shall Comprise Of Flow Sensor / Transducer, Flow Transmitter, Digital Level Indicator / Remote Indicator, Control Unit • Operating Temperature: 0 To 50°C.• Safety: Explosion Proof Or Intrinsically Safe. • Measuring Principal: Ultrasonic.• Communication Protocol: Open Protocol Like Modbus, Profibus, Hart, Etc.• Analog Output: Isolated 4-20Ma.• Relay Contacts: Minimum Of 3 Spdt Contacts.• Accuracy: ± 0.25% Of Measured Value Or Better. •Output-. 4 - 20 Ma •Protection A. ) Sensor: Ip-68. B. ) Transmitter / Controller: Ip-66 ( Nema 4X ) .•Display: Lcd With Led Backlighting 130 , 1Kva Ups • Capacity -1000Va / 600W • Input Voltage Range- 140 V ~ 300 V Ac Frequency - 50 Hz ± 10% • Operating Temperature- 0°C-40°C; • Charging Time -6~8 Hours Recover To 90% Capacity Batteryrating-Smf12v / 7Ahx2 Batteries. • Output Voltage -230 V Ac Nominal Transfer Time-Typical4~8Ms•Type-Sealed Maintenance Free , Comprehensive Operation & Maintenance Cost For Whole System For 1St Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibrationofsysteminayear, Repairable Cost, Replacement Cost, Consumables Etc. , Comprehensive Operation & Maintenance Cost For Whole System For 2Nd Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibration Of System In A Year, Repairablecost, Replacementcost, Consumables Etc. , Comprehensive Operation & Maintenance Cost For Whole System For 3Rd Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibration Of System In A Year, Repairablecost, Replacementcost, Consumables Etc. , Comprehensive Operation & Maintenance Cost For Whole System For 4Th Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibration Of System In A Year, Repairablecost, Replacementcost, Consumables Etc. , Comprehensive Operation & Maintenance Cost For Whole System For 5Th Year Including Data Transmission To Cpcb, Rspcb & Mcb Website, Four Service Visits, Two Times Calibration Of System In A Year, Repairablecost, Replacementcost, Consumables Etc. , Installation Charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Rajasthan View Result →
44.
Science and Technology #8910608 Technical Bid
Selection Of A Creative And Execution Company To Set Up Immersive Group Virtual Reality Tour In Bus Of Atal Tunnel, Rohtang On Leh-Manali Highway, H.P. Selection Of A Creative And Execution Company To Set Up Immersive Group Virtual Reality Tour In Bus Of Atal Tunnel, Rohtang On Leh-Manali Highway, H.P. , Bus , Item No. 1: Supply Of Electric Bus Shell With The Specifications As Per Rfp Document , Content , Item No. 2: Research About Cultural Heritage Of Himachal, Visiting Tourist Places For Recce, 360 Degree Shoot Of Various Tourist Places Along With Drone Shoot. , Item No. 3: Manpower Deployment For Planning, Concept Development, Clarifying Requirements, Concept Generation, Concept Selection, System Level Designing, Detail Designing, Testing & Refining, Production Ramp-Up. , Item No. 4: Manpower Recruitment And Deployment For Design And Development Of Screen Playing Of Markup, Aspect Ratio Determination, Sketching Subject With Background, Planning Arrow And Camera Movement, Shot Planning, Finalizing And Submission For Approval. , Item No. 5: Manpower Recruitment And Deployment For Development Of Logline Crafting, Treatment Writing, Storyline Development, Plot And Outline, First Draft For Approval, Rewriting Based On Feedback. , Item No. 6: Renting Of A Recording Studio And Manpower Deployment For Scripting, Dubbing, Editing, And Production. Selection Of National Award Winner Voiceover Artist For Recording Of Voiceover. , Item No. 7: Manpower Deployment For Development Of Music Story Line, Recording A Demo, Rehearsals, Basic Tracks, Overdubbing, S Editing Music, Music Mixing Part 1, Music Mixing Part 2, Music Mixing Part 3, Mastering, And Final Production. , Item No. 8: Manpower Deployment For Development Of Subdivision/Box Modeling, Spline/Nurbs Modeling, Image & Surface Based Modelling, Procedural Modelling, Digital Modelling, Sub-Division Modelling. The Use Of All The Above Process Will Be To Create 3D Assets. Use Of Depth Sensors Will Be To Scan Monuments For Recreation Of 3D Asset. Recreation Of 3D Assets From Images Taken On Site. Proper Texturing For Creating Real Life Like 3D Models. Close Still Shots Of Texture Of Per Unit Monuments And Object Being Modelled. , Item No. 9: Deployment Of Manpower For Development Of Rigging, Animation, Lighting, Camera Setting, Rendering, Compositing And Special Vfx, Music And Foley, Editing And Final Output. , Item No. 10: Deployment Of Manpower For Designing And Development Of New Graphics For Various Scenes, Editing Of Videos And Images Used Collecting From Recce, Re-Creation Of New Images And Videos. , Hardware , Item No. 11: Supply Installation, Testing & Commissioning Of Extra Battery Bank Of The Same Make As Supplied By Bus Oem To Run The Show Equipment As Mentioned , Item No. 12:Physical Modification Of The Bus Will Be Done As Per: Maximum Dimensions Consideration For Fleet Movement Inside Bus (Length And Width Restrictions May Apply), Fixing Of Screens Involving Consideration Of Maximum Weight (Laden And Unladen) Stability, Accessibility. Physical Changes, Window Removal, Welding & Fixing Of Other Structures Installation Of Display Unit On Window On A Slideway, Ip67 Housing & Wiring, Audio & Amplifier Installation And Provision Of Push Back Seat And Making Sure The Bus Is Complete In All Aspect And In Running Condition For Height Above Sea Level Of More Than Approx 10000 Feet With The Required Facility And Delivered At Site Manali As Desired By Hpsedc/ Hptdc. , Item No. 13:Measuring And 3D Scanning Of Bus Using Industry Grade Mm Accurate 3D Scanner For Approval. , Item No. 14: 3D Creation Of Bus With The Help Of Scanned Data And Making Proper Modifications And Doing Dimensioning. A Proper Plan For Modification Has To Be Submitted For Approval. , Item No. 15: Making Of An Electrical Layout Diagram Of The Bus For Planning Of Installation Of A New Equipment. , Item No. 16: Laying Out And Supply Of Electrical Wires Inside The Bus Using Ip66 & Ip67 Wire Housing With Heat Resistant & Flame Retardant ( Hrfr ) Cable , Item No. 17: Supply, Testing And Commissioning Of Transparent Screens To Cover All The Sides Of The Bus 22Sqm (I.E., Front, Sides, Corner And Top Of Bus ) Having : Minimum Area Of 22 Sqm Or More With High Ppi (Pixel Per Inch) Having Minimum 3840 * 2160 (4K) Resolution With 60 - 65 % Transparency With Minimum Bezel And Refresh Rate Of 50 Hertz 1 Hdmi Port And Supported Aspect Ratio Of 16:9. Power Requirement Of 240 V Ac, 60 - 90 Watt For Creating A Smooth Transition From Real World To Virtual 3D World. , Item No. 18: Supply, Installation, Testing And Commissioning Of Smart Switchable Glass Film Screen , Item No. 19: Supply, Installation, Testing And Commissioning Of Hdmi Cable From Reputed Suppliers With 24K Gold Plated Connector: It Must Have Streaming Support Of Up To 4K Videos With A Wrap Speed Of 10 Gb/S Or More Along With With A Inbuilt Repeater. , Item No. 20: Supply, Installation, Testing And Commissioning Of Dp To Hdmi Converter. , Item No. 21: Supply,Testing And Commissioning Of 4U Rack Mountable Display Server Of I9/Xeon Latest Generation With Lifetime Os License, 64 Gb Ram Of Ddr4 3200 Mhz, Gpu To Drive 4 X 4K Output With Ray Tracing Support, Should Be Supplied Along With Sync Card If Multiple Gpu Is Used , 1 Tb Ssd Having Following Interface Sata 6Gb/S Should Be Compatible With Sata 3Gb/S , Sata 1.5Gb/S Interfaces Having Sequential Read/Write Speeds Up To 550/520 Mb/S Respectively, Power: 260 Watt, 240 V Ac. , Item No. 22: Supply, Testing And Commissioning Of Rack Mountable Application Server Of I9/Xeon Latest Generation With Lifetime Os License, 64 Gb Ram Of Ddr4 3200 Mhz, Gpu To Drive 2 Output With Ray Tracing Support , 1 Tb Ssd Having Following Interface Sata 6Gb/S Should Be Compatible With Sata 3Gb/S Sata 1.5Gb/S Interfaces Having Sequential Read/Write Speeds Up To 550/520 Mb/S Respectively, Power: 260 Watt, 240 V Ac. , Item No. 23: Supply, Testing And Commissioning Of Shock Proof Server Rack With Shock Proof Of 22U 600X600mm Having Pdu 6 Socket, 4 Cooling Fan, Static Loading 600 Kgs, 19” International Standard, Material Spcc Quality Cold Rolled Sheet, Powder Coating Frame Ral 7035 Doors Ral 7016 , Item No. 24: Supply Testing And Commissioning Of Industrial Grade Location Sensor For Mapping The 3D Vr Content With The Movement Calculation Of The Bus In Real Time With Ip66 & Ip67 Housing Having Max Acceleration Detection Of 300 [M/S2] Minimum Velocity Detection Of 5000 Meter /Minute With Maximum Power Requirement Of 24 Dc. , Item No. 25: Supply, Testing And Commissioning Of Imu Sensor Having 6 Degree Of Freedom (Dof) , Gyroscope Angular Rate Range Of -245 To 245 Deg/S, Accelerometer Acceleration Rate Range Of -60 To +60 M/S2, Pitch & Roll Range Of -60 To +60 Degree For Mapping The 3D Vr Content With Gravitational And Inertia Based Displacements Of The Bus In Real Time. , Item No. 26: Supply, Testing And Commissioning Of Industrial Grade Obd (On-Board Diagnostics) For Data Transfer. The Obd(On-Board Diagnostics) Specifications Must Include Wired Ability To Read Data Streams And Freeze Frame, Oil Light Reset, Sas (Steering Systems And Suspension Systems), Srs (Shock Response Spectrum), Dpf(Diesel Particulate Filters), Epb(Electric Park Brake), Tpms (Tire-Pressure Monitoring System), Battery Check Function Of Industrial Grade Make Only. , Item No. 27: Supply, Testing And Commissioning Of Compact Two Way 8 Loudspeaker System Having Frequency Range: 58 Hz - 20 Khz (-10 Db), Frequency Response: 68 Hz – 19 Khz (±3 Db), Coverage Pattern- 90° X 50°, System Sensitivity (Db-Spl, 1W @ 1M)-92 Db, Maximum Spl: 113 Db, Nominal, Impedance: 8 Ohms, Power Handling (Program):500W , Wall Mount Bracket For Above Speakers. , Item No. 28: Supply,Testing And Commissioning Of Dual 10 Compact Subwoofer With Dual 10 Subwoofer, Frequency Range 40 Hz - 220 Hz, Nominal Impedance 8O, Power Rating: 400W Cont., Sensitivity (1W, 1M) 95 Db, Max Spl 122 Db, 45 Hz, 24 Db/Oct High-Pass Filter, Safety Agency Rohs-Compliant. , Item No. 29: Supply, Testing And Commissioning Of 6.5 Premium In-Wall Speakers With: Frequency Range: 38 Hz - 20 Khz (-10 Db), Power Rating: 200 W Peak Sensitivity (1W, 1M): 88 Db Spl, Impedance: 8 Ohms, 3Rd Order (18 Db/Oct) Low Pass And 3Rd Order (18 Db/Oct) High Pass, Optimum Air Cavity Behind Speaker 20 To 40 Liters With Rough-In Frame For Above Speakers. , Item No. 30: Supply, Testing And Commissioning Of Four-Channel, 600W @ 4O Analog Power Amplifier, 70V/100V With 600 W X 4 Channels At 4 And 8 Ohms/100V/70V Or Better, Voltage Gain :34 Db, Frequency Response 20 Hz - 20 Khz (At 1 W ), Signal-To-Noise Ratio Analog Input : 104 Db, Damping Factor :> 1000, 3 Nos Of Rj45 Port 1 For Data And 2 For Digital Audio Transmission In Redundancy Concept, Integrated 8 Band Eq , Limiter , Crossover And Delay. , Item No. 31: Supply, Testing And Commissioning Of Two-Channel, 300W @ 4O Analog Power Amplifier, 70V/100V, 300 W X 2 Channels At 4 And 8 Ohms/100V/70V Or Better, Voltage Gain :34 Db, Frequency Response 20 Hz - 20 Khz (At 1 W ), Signal-To-Noise Ratio Analog Input : 104 Db, Damping Factor :> 1000, 3 Nos Of Rj45 Port 1 For Data And 2 For Digital Audio Transmission In Redundancy Concept, Integrated 8 Band Eq , Limiter , Crossover And Delay. , Item No. 32: Supply, Testing And Commissioning Of 4 X 4 Networked Digital Signal Processor Dsp With 4 Inputs And 4 Outputs, 12 Control Inputs And 6 Logic Outputs For Gpio Integration, 48V Phantom Power On All Analog Inputs, Thd: <0.01% 20Hz To 20Khz, +10Dbu Output, Crosstalk: <-75Db, Open Architecture Software Configurable, Separate Logic Processing Power, 2 Digital Audio Bus Rj 45 Port 1 Ethernet Port For Monitoring And Configuration. , Item No. 33: Supply,, Testing And Commissioning Of Four Button Zone Selector And Volume Control Having 1 Programmable Push/Rotary Encoder, 1 Programmable Encoder Ring (Multicolored), 4 Programmable Buttons (Multicolored), 1 Programmable 64X128 Pixel Lcd (Multicolored), Sleep Function, Poe Port, Programmable Lcd Screen , Item No. 34: Supply, Installation, Testing And Commissioning Of Wireless Keyboard And Mouse , Item No. 35: Supply, Installation, Testing And Commissioning Of Router With Dual Channel 2.4 Ghz & 5Ghz Having Data Speed Of 2.53 Gbps, With Wireless 802.11A/B/G/N/Ac , Item No. 36: Supply, Installation, Testing And Commissioning Ethernet Switch With 24 Port ,100 Mbps, 240 Volts, 6 Watt Power , Item No. 37: Supply, Installation, Testing And Commissioning Of Cat 6 Cable For Connections. , Item No. 38: Cctv Cameras Supply, Testing And Commissioning - 2Mp Bullet Camera Indoor/Outdoor, 1/2.8 Progressive Scan Cmos Blc/3D Dnr/Hlc - 1920 × 1080@30Fps - Up To 40 M Ir Range - 2.8 Mm/4 Mm/6Mm Fixed Lens Ip67 - Dvr Along With 5 Tv Hard Disk For Inside Bus , Item No. 39: Supply, Installation, Testing And Commissioning Of Evse(Electric Vehicle Supply Equipment ) For Charging Of 2 Wheeler, 3 Wheeler & 4 Wheeler Having Charger Of Following Connector Type: Combined Charging System ( Ccs ) ( Min 50 Kw ) With 1 Cg ( Connector Gun) Charge De Move ( Chademo) ( Min 50 Kw ) With 1 Cg ( Connector Gun ) Bharat Dc-001 (15 Kw) With 1 Cg (Connector Gun) Bharat Ac-001(10 Kw) With 3 Cg (Connector Gun) Of 3.3 Kw Per Unit. The Charger Should Be As Per Dst/Bis Standards. , Software , Item No. 40: Appropriate Software To Be Developed To Run The Required Content And Integrate With The Supplied Sensors. The Software Source Code Must Be Developed Using Agile / Waterfall Methodology. Proper Supply Of Test Scripts Must Follow. Software Should Have Following Capabilities: Sensor Interface For Gps, Imu, Velocimeter, Audio Syncing With Speed Of Bus, Content Syncing With Speed Of Bus, Geo Data Mapping And Playing 3D Content In Multiple Screens, Rendering Capability, Mechanism To Trigger Software Across Network With Latency Of 5-20 Ms, Creation Of 3D Environment With A 3D Bus, Data Mapping Of Sensor To 3D Bus, 3D Rendering Based On Sensor Input, Imu Sensor Data Mapping To The Movement Of 3D Bus, Yaw, Pitch, Roll Mapping To 3D Bus, Integration Of Virtual Camera Inside 3D World To Generate Exact Map Of Real World. , Operation And Maintenance (Opex) , Item No. 41: Operation And Maintenance Cost For 2Nd Year , Item No. 42: Operation And Maintenance Cost For 3Nd Year , Item No. 43: Operation And Maintenance Cost For 4Th Year , Item No. 44: Operation And Maintenance Cost For 5Th Year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Himachal Pradesh View Result →
45.
Housing Urban and Rular Development #8768148 AOC
Providing, Supplying, Commissioning Of Innovation Lab Equipments For Ghps & Ghs K. Veerapura Village In Ballari Taluk, Under 2515 Kkrdb Cmdq For The Year 2024-25. - Misc t-31, Six Axis Robotic ARM Consists of •Axis – 6 axis•64- bit ARM Cortex Processor8GB RAM64 GB Storage CapacityServo Motors with 9.6 Kg/cm Torque Payload – 200gReach – 200 mmUSB Support port Should have 8 MP Camera User can add various objects for detection Should identify pre trained Objects Should perform pick and place operation Dimension in mm(D x H): 1100 x 600 One pair of PCB and Mechanical casing should be provided 1 2 Petro robot it should consists of Should have 8 MP Camera 64 bit ARM Cortex Processor 2-D Lidar Sensor Person Recognitiobject Recognition Should consists of 4 leg armShould perform forward and reverse motion Should have rechargeable battery Should have 12 V rechargeable BatteryPower Adapter for Battery Recharge •Dimension in cm (L x W x H): 62 x 20 x 45•One pair of PCB and Mechanical casing should be provided •Tasks performed: 1. Walking2. Running3. Pushups4. Dance5. Jumping6. Sit and Stand positions7. Lane following 1 3 Line Following robo car it should consists of A Robotic car with 4 wheelsShould have 2 IR sensors Should have 4 DC motors Atmega 328P Microcontroller L298 Motor Driver for Direction and Speed control Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5 Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: Straight Weight: 250gm•One pair of PCB and Mechanical casing should be provided 1 4 Obstacle avoidance robo car it shouldconsists of Robotic Car with 4 Wheels Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8 Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 5 Voice controlled Robo Car it should consists of 1 30 Robotic Car with 4 Wheels DC motors with drivesBluetooth controllerShould perform motions by voice command Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22 mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (KgCm): 0.8Gearbox Shape: Straight Weight: 250gm •One pair of PCB and Mechanical casing should be provided 6 RC Tank Robot RC Tank Chassis Kit – 01ESP32 controllerLED Switch4 DC motors with Drive Battery 4 DC motors with drive ESP32 controllerDimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 7 AI Humaid Robot The AI Humaid robot can realize human body induction in different directions, can perform facial recognition, supports voice interaction, and can realize the function of guiding navigation and explaining. Should have obstacle avoidance algorithm, perceive the real-time changes in the surrounding environment, bypass the obstacles in the planned path, and choose the appropriate route Go forward and finally reach the target point. The robot should have a touchable high-definition display screen, which should display, video playback, product information query, map display and other functions. The robot should have an open SDK package and an open API, which can be used for development according to the application scenario, adding exclusive personality functions, and more in line with the actual application scenario. Technical specifications include a user-friendly interface, robust security measures, seamless integration, efficient performance, and scalability. Specification: Processor: Intel i5 8th Gen Motors: DC motors for smooth and precise movement.Microphone: High-sensitivity microphone for voice recognition and interaction.Speakers: High-quality speakers for audio output and ntertainment. Display: LCD display for user interaction, information visualization. Dimension in cm(L x W x H): 50 x 54 x 100 1 8.1 IoT Pack IoT Based Smart Agriculture Smart Agriculture model should include an Raspberry Pi, a 10 inch LCD display, soil moisture sensor, water pump, and relay to automate irrigation for plants. The soil moisture sensor should continuously monitor the moisture levels in the soil. When the soil is wet, the relay should remain off, preventing the pump from operating. However, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. The LCD display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. Constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart techlogy in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. Microcontroller: Raspberry piSoil Moisture Sensor – Measures soil humidity levels.DHT11/DHT22 Sensor – Monitors temperature and humidity.pH Sensor – Checks soil acidity or alkalinity.LDR (Light Sensor) – Detects sunlight intensity.Rain Sensor – Detects rainfall for irrigation control.Ultrasonic Sensor – Monitors water level in tanks.Water Pump – Automated irrigation control via relay.Servo Motor – Adjusts solar panel orientation.Relay Module (5V) – Controls high-power devices.IoT Connectivity – Data transmission via WiFi/Bluetooth.Cloud Storage – Stores real-time sensor data online.Web App – Displays real-time farm conditions.Power Adapter – Powers all connected components. 1 8.2 IoT Based Home Automation The Home Automation System model should include a Raspberry Pi, MQ-2 gas 1 31 sensor, buzzer, ultrasonic sensor, servo motor, 7-inch display, DHT11 temperature sensor, and two relays to enhance home convenience and safety. The ultrasonic sensor should detect approaching objects, triggering the servo motor to automatically open the door, while the 7-inch display presents real-time temperature readings. In one room, an IR sensor should detect motion, activating the relay to turn on an LED and a fan. Additionally, when the MQ-2 sensor detects smoke in the kitchen, the buzzer should sound an alert until the smoke dissipates. The system must feature a durable plastic body for reliability and easy assembly, showcasing the seamless integration of smart techlogies to create a safer and more efficient living environment, ensuring enhanced convenience and security. Microcontroller: Raspberry Pi for central control with WiFi and Bluetooth Ram: 4GB64 bit ARM Cortex ControllerGas Detection: MQ-2 sensor to detect smoke and gas leaksAlert System: Buzzer sounds when smoke is detectedObject Detection: Ultrasonic sensor detects approaching objects for automatic door controlDoor Mechanism: Servo motor opens the door upon object detectionDisplay: 7-inch screen for real-time temperature and system statusTemperature Monitoring: DHT11 sensor measures room temperature and humidityMotion Detection: IR sensor detects movement in the room Relay Module (x2): Controls LED and fan activationLighting & Ventilation: LED and fan turn on when motion is detectedBody: Durable plastic for reliability and easy assembly 8.3 Smart Watch health parameter monitoring kit Smart Watch is an invative wearable device project, and the model should include an ESP processor, OLED display, and four push buttons to provide a range of functionalities. The watch must feature a custom-designed PCB for compactness and efficiency, along with a durable watch belt for comfortable wear. One push button should be dedicated to displaying the current time, date, and day, while ather button should provide weather information, enhancing convenience for users. The remaining two buttons should be integrated for the IoT interface, allowing interaction with various smart devices and applications. This project demonstrates the potential of combining advanced techlogy with practical design, creating a multifunctional smartwatch that caters to modern lifestyle needs, ensuring reliability and user-friendly operation. ESP Processor – Core controller for smartwatch operations. OLED Display – Displays time, date, weather, and IoT interactions. Four Push Buttons – Dedicated for time, date, weather, and IoT control. Custom-Designed PCB – Ensures compactness and efficiency. Durable Watch Belt – Provides comfort for daily wear. Time, Date, and Day Display – Activated by a dedicated button. Weather Information Display – Accessed via a separate button. IoT Integration – Controls and interacts with smart devices. Energy-Efficient Design – Optimized for long battery life. Modern & User-Friendly – Enhances convenience and usability. 1 8.4 IoT Based Smart Cam Vision Snap should consist of an advanced security system that includes facial recognition for identifying individuals, enhancing security in restricted areas. Key components include a Raspberry Pi, a camera, and a display for real-time monitoring. This system features motion detection, which triggers alerts for unauthorized movement, significantly improving surveillance capabilities. It provides real-time alerts, enabling immediate responses to potential threats, while secure connectivity ensures the protection of sensitive data. Together, these features create a robust security solution for various applications, making Vision Snap an effective tool for safeguarding premises and enhancing overall security measures. Raspberry Pi – Central processing unit for AI-based security.Camera Module – Captures real-time footage and facial recognition.Display Screen – Shows live monitoring and alerts.Facial Recognition – Identifies individuals for security access.Motion Detection – Detects unauthorized movement and triggers alerts.Real-Time Alerts – Sends tifications for immediate response.Secure Connectivity – Protects sensitive surveillance data.AI-Powered Surveillance – 1 32 Enhances monitoring efficiency.Remote Access – Allows monitoring from any location.Robust Security System – Ideal for restricted areas and premises. 9.1 Immersive Techlogy Pack VR Headset Kit Should Consist of Following Line Item VR Head Set Storage: 512GBDisplay: Each eye experiences a resolution of 2064 x 2208 pixels, delivering sharp and immersive visuals.Processor: Powered by the Snapdragon XR2 Gen 2 chipset, providing enhanced performance for demanding VR applications.Refresh Rate: Supports a 120Hz refresh rate, ensuring smooth and responsive gameplay.Memory: Equipped with 8GB of RAM to handle multitasking and complex VR environments.Mixed Reality Capabilities: Features full-color passthrough, allowing users to blend virtual and real-world elements seamlessly.Design: Utilizes pancake optics to reduce the headsets size, offering a more comfortable fit for extended use. 1 9.2 32-inch or more smart LED TV to Stream a VR applications Resolution: HD (720p)Smart Platform: Google TVFeatures: Google Play, Google Cast Built-in, HDR10, Dolby Audio, Voice Remote, Live TV Streaming 1 9.3 AA Batteries – 10 Voltage: 3.7V (Lithium-Ion)Capacity: 1800–3500 mAhChemistry Types: Alkaline, NiMH (Rechargeable), Lithium, Zinc-CarbonSize: Diameter ~14.5mm, Length ~50.5mmWeight: ~23g to 30g 1 9.4 6DoF AR-VR Educational Controller can be used as and augmented reality (AR) device. Hold virtual heart, lungs, disaurs, plants and so much more in your hand to get an engaging learning experience. AR provides students with opportunities to deepen their kwledge within several areas, including:ScienceWorking with numbersSpatial concepts Content creationReal-life environments & scenarios 1 9.5 Samsung Galaxy M15 5G or ARCore supported Devices Display: 6.5-inch Super AMOLED, 1080 x 2340 pixelsProcessor: MediaTek Dimensity 6100+, Octa-coreRAM & Storage: 4GB/6GB/8GB RAM, 28GB/256GB storage (expandable up to 1TB)Rear Cameras: 50MP (wide) + 5MP (ultra-wide) + 2MP (macro)Front Camera: 13MPBattery: 6,000mAh, 25W fast charging OS: Android 14 with One UI 6Security: Side-mounted fingerprint sensor Connectivity: 5G, NFC supportDimensions: 160.1 x 76.8 x 9.3mm, Weight : 217g 1 9.6 VR Application Content for experintial learning a) VR chemistry lab, b) VR human anatomy, c) VR tour guide, d) VR English Learning App, e) VR space exploration app, f) VR electrical simulator app, g) VR Based Lathe Machine app, h) VR Based SMD Soldering & De soldering app 1 10 Drone Kit Should Consist of Following Line Item. Drone Kit with Wi-Fi and Camera is an ideal project for enthusiasts looking to build a custom drone from the ground up. This kit typically includes essential components such as a frame, brushless motors (BLDC), electronic speed controllers (ESCs), a flight controller board (FCB), and a Wi-Fi-enabled camera for real-time video transmission. It offers the flexibility of adding a LiPo battery for power, a remote controller, and propellers for flight stability. With built-in WiFi, users can easily control and monitor the drone using a mobile app or computer, while the camera provides aerial photography and video streaming capabilities. 1 x F450 Frame 4 x 1000kv BLDC Motor 4 x ESC Motor 1 x 2-3 Cell Battery Charger1 x 2200 mAh Lipo Battery1 x Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver1 x APM 2.8 Flight Controller (Without Compass) 1 11.1 Mini Makers Pack Thermo Sage Thermo Sage is a touch-free temperature monitoring system, and the model should include an ESP8266, OLED display, infrared temperature sensor, ultrasonic sensor, two LEDs, and a buzzer for efficient health monitoring. When the ultrasonic sensor detects a person within 10 cm, the infrared sensor measures their body temperature, displaying the result on the OLED screen. If the temperature is 1 33 rmal, the green LED lights up as an indication. However, if the temperature exceeds the rmal range, the red LED activates, and the buzzer sounds an alert. The design must feature a durable plastic body for reliable performance, offering a safe, contactless solution for monitoring body temperature, ideal for public health and safety applications. Microcontroller: ESP8266 for wireless connectivityDisplay: OLED screen for temperature readingsTemperature Sensor: Infrared sensor for touch-free measurementDistance Sensor: Ultrasonic sensor to detect person within 10 cmLED Indicators: Green LED for rmal temperature, red LED for high temperatureBuzzer: Alerts when temperature is above rmal rangeBody: Durable plastic for reliable performanceOne pair of PCB and Mechanical Design will be provided 11.2 Sun Quest Sun Quest model should include an Ardui Na, two LDR modules, a servomotor, a solar panel, and two LEDs to maximize energy efficiency. The LDR modules detect light intensity, enabling the system to track the sun’s position. When one LDR senses higher light intensity, the servo motor should rotate the solar panel toward that direction to optimize energy capture. The LEDs connected to the solar panel will demonstrate real-time power generation, lighting up to show how current is produced as the panel adjusts. The design must feature a durable plastic body for longevity, enhancing solar energy efficiency by dynamically following the sun’s path throughout the day. Microcontroller: Ardui Na for system controlLight Sensors: Two LDR modules for detecting light intensityActuator: Servo motor for rotating the solar panelSolar Panel: Generates and demonstrates power outputLED Indicators: Show real-time power generationBody: Durable plastic for longevity One pair of PCB and Mechanical Design will be provided 1 11.3 LightScape Lightscape model should include an Ardui Na, LDR module, IR sensor, and 6 LEDs to optimize energy usage based on environmental conditions. When the LDR detects darkness (indicating nighttime), the system should activate, keeping 3 LEDs ON for basic lighting. When the IR sensor detects movement, all 6 LEDs should turn ON for 5 seconds to enhance visibility for pedestrians or vehicles, then return to 3 LEDs ON. During daylight, when the LDR senses light, the LEDs should remain OFF to conserve energy. The design must feature a durable plastic body for reliability, providing efficient, adaptive street lighting that responds to both time of day and movement, significantly improving energy conservation and safety on the streets. Microcontroller: Ardui Na for system automationSensors: LDR for detecting light levels, IR sensor for motion detectionLEDs: 6 LEDs for adaptive street lightingLighting Control: 3 LEDs ON at night, all 6 ON when motion is detected for 5 secondsEnergy Conservation: LEDs OFF during daylight Body: Durable plastic for reliabilityOne pair of PCB and Mechanical Design will be provided 1 11.4 Navwave NavWave is a sonar-inspired object detection system, and the model should include an ESP8266, OLED display, ultrasonic sensor, and servo motor to detect and display nearby objects. The ultrasonic sensor, mounted on the servo motor, should continuously rotate from 0 to 180 degrees, scanning the surroundings for obstacles. As objects are detected, the system should display a dotted pattern on the OLED screen, similar to a submarine radar interface, providing a real-time visual representation of object proximity and location. The design must feature a durable plastic body for reliability, simulating sonar navigation and offering a dynamic way to monitor nearby obstacles through the rotating ultrasonic sensor and radar-like display. Its robust design ensures optimal performance in various environments, making it an excellent tool for obstacle detection and navigation. •Microcontroller: ESP8266 for processing and wireless capabilityDisplay: OLED screen with radar-like visual representationSensor: Ultrasonic sensor for object detectionActuator: Servo motor for 0°-180° scanning motionDetection Mechanism: Real-time scanning and obstacle mappingBody: Durable plastic for reliabilityOne pair of PCB and Mechanical 1 34 Design will be provided 12 Electronics & Hardware Kit Universal Electrical/Electronic breadboard plug and play training kit designed to perform the experiments from the basic to advance level of electrical and electronics exercises, This kit is made easy to conduct experiments by plugging in the components in to the specifically designed breadboard. Should have built-in Function generator, power supply and required meters List of components Resistors SetPotentiometers n-linear resistors VDR-, LDR-, NTC-, PTC resistors Capacitors SetTransformer 1 13.1 Experiential Skilling Lab set Electrical Booth Spec - 01 Each workstation should have dimensions of 4 ft width and 6 ft height. The material used for the workstations construction must be high-quality plywood with a thickness of at least 10mm, ensuring durability and stability. The workstation should be designed in a plus-shaped configuration, where each arm of the plus symbol represents an individual training domain. The work station should have 4 station where, Electrical installation, Plumbing and CCTV installation can be practiced All necessaries aids for this training should be provided in this work station 1 13.2 CCTV Installation kit To provide a comprehensive training setup for students to learn and practice the installation, configuration, and maintenance of CCTV systems, including cabling, DVR setup, and network integration for monitoring and recording. Dome Cameras –1 Bullet Camera-1 DVR/NVR Unit -1 Cables and AccessoriesPower Supply with adaptorsSwitch and RouterDisplay and MonitoringNetworking Tools 1 13.3 Domestic Electric Wiring Kit To provide a comprehensive training setup for students to learn and practice the installation, wiring, and maintenance of domestic Electric wiring methods, includes reading and understanding electrical drawings, Switch gears and colour coding of cables. Domestic electric wiring kit – 1 set MCB, 4P, 25ADistribution Box 3 tier 36 modules RCCB 2P 40A 30mA ACtypeMCB xC60 1P 2A C 10000A6A 1-WAY SWITCH 6A 2-way Switch6A/16A 3-Pin Socket Outlet PVC Casing-Capping, 50mmPVC CasingCapping, 25mmPVC Conduit, High density, 19mmSaddles, 19 mmPOP screwPVC Junction Box 19mm, 1 wayPVC Junction Box 19mm, 2 wayPVC Junction Box 19mm, 3 wayPVC Junction Box 19mm, 4 wayBatten Holder2- Module Box with surface plate, PVC4-Module Box, PVC8-Module Box, PVCTools – 1 set 12V Cordless Drill machinePhilip bit Spirit Level, 30 cm Steel Rule, 30 Cm Wire Stripper Heavy duty cable cutter Try square Measurement tape Mini Hack Saw frame with blades Hack Saw Frame with blades Crimping tool, tube type lugs File Set Electrician knifeAllen key set Hole saw, 22 mm Screw Driver set se plier Drill Bit Set Mini screw driver set Aluminum Stair Case, 3 step 1 13.4 Plumbing Installation Setup To equip a plumbing training lab with all necessary tools and equipment to provide students with hands-on experience in basic and advanced plumbing techniques, including pipe fitting, jointing, fixture installation, and system testing. Tools for Pipe Cutting and ShapingPipe Cutter:Hacksaw:Pipe Bender:PVC Pipe Cutting Scissors:Tools for Threading and JoiningPipe Threaded Set: Teflon Tape Dispenser:Plumbers Soldering Kit:Adhesive Application Kit: Wrenches and SpannersAdjustable Pipe Wrench:Basin Wrench:Ring Spanner Set:Testing and Measurement ToolsWater Pressure Gauge: Flow Rate Meter:Leak Detection Kit: Spirit Level:Plumbing Fixtures for Installation PracticeSink and Basin Fixtures:Faucets and Taps:Shower Unit: Drainage System ComponentsP-traps and S-traps:Wastewater Pipes:Junction Boxes: 1 14 Smart Solar Renewable Energy Kit Solar Photovoltaic Training Kit for Lab experimentsPV Module Stand: 2s. 1 35 15 SAM S-5 Missile Educational Training Kit Missile defense systems are essential for national security, airspace protection, and strategic deterrence. This will explore the working principles of the missile system, focusing on its launch mechanism, guidance techlogy, and interception capabilities. Additionally, it will analyze the applications of the model in air defense, including target tracking, threat neutralization, and military strategy. SAM S-5 Missile System should consist of the following items. Raspberry Pi x 1Camera Module x 1Lidar or Ultrasonic sensor x 1 Servo MotorsGyroscope x 1Shooter x 1Battery x 1 Battery Adapter x 1 1 16 GEO Satellite Communication Educational Training Kit Satellites play a crucial role in modern communication, navigation, weather forecasting, and scientific research. This will explore the communication and data transmission process in GEO satellites analyze the applications of GEO satellites in telecommunications, weather forecasting, and remote sensing. GEO Satellite Communication Kit should consist of the following items. Raspberry Pi x 3ESP8266 x 3ZigBee Module and adapter x 3 RF Module x 3 Temperature and Humidity Sensor x 2 Soil Moisture Sensor x 1 NPK Sensor x 1 Pressure Sensor x 2Co2 Sensor x 1Camera Module x 1Buzzer x 3 LEDsRover Model x 1Base station Model x 1Battery Battery Adapter 1 17 LUNAR PATH Explorer- Educational Rover BOT It should comes with Matt finished metal chassis. Included all sensor metal clamps, and high torque DC Johnson A grade motors. Compatible with Ardui, raspberry, etc. Easy to assemble. Assembly manual provided in the kit. All required components, sensors, and tools are provided in the kit. It should consists of following items: 12V DC 10 RPM MOTORS -2ULTRASONIC SENSORS - 3IR SENSORS - 5 WIDE TRACK WHEELS - 4WIDE TRACK BELTNUT BOLTSSPANNER TWO IN ONE SCREWDRIVER,JUMPER WIRESSG90 SERVO MOTOR -1 ON/OFF ROCKER SWITCH -2TOGGLE SWITCH - 2MOTOR WIRES 1 18 Package . 1 Atal Tinkering Lab The package should include all items As per QR/specification for Package . 1 - Atal Tinkering Lab of NITI AAYOG Electronics Development, Robotics, Internet of Things and Sensors approved by NITI AAYOG (Approved Copy of Qrs / Specification uploaded in Gem portal) Specification: Microcontrollers & Boards:Ardui U/Na/Mega (or equivalents).Raspberry Pi 3 Model B+.ESP32, de MCU.Prototyping Tools:Solderless breadboards (400 and 800 pins).Self-adhesive proto shield and FR2 A-grade materials.Hook-up wires, jumper cables (M-M, M-F, F-F), and alligator connectors.Sensors & Modules:Wide range of sensors: Humidity, temperature, motion, gas (MQ series), IR, ultrasonic, PIR, and more.RFID Reader, Bluetooth, GSM, GPS, and Wi-Fi modules.Capacitive touch, soil moisture, rain, and color recognition sensors.Displays & Actuators:16x2 LCD display with I2C interface. LED matrices, RGB LEDs, and various single-color LEDs.Motors: DC, stepper, servo, vibrating, and BO motor with driver modules.Miscellaneous Components: Resistor and capacitor kits, diodes, transistors, and ICs (LM555).Relays, motor drivers, and piezoelectric plates.Robotics, drone, and application-specific DIY kitsPower & Connectivity:USB cables, battery packs, power banks, and clips. 1 19 Package . 2 Atal Tinkering Lab – Rapid Prototyping Tools The Package should include all items As per QR/specification for Package .2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG Specifications: 3D Printer Kit and tools Dedicated UPS/Power back up Filament for 3D printer Filament Storage Box Set of Arts & Crafts Accessories – e.g.- stationary items and basic prototyping materials 1 20 Package . 3 Atal Tinkering Lab – Mechanical, Electrical and Measurement Tools The package should include all items As per QR/specification for Package .3 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI 1 36 AAYOG Specification: Cutting Tools: Hacksaw frame with blades (standard & mini).File set, mini file set, and flexible cutting mat. Hand Tools: Pliers (4.5-inch), tweezers, ball pein hammer, claw hammer, C-clamp, spanner set, Allen key set, wrench, and wire strippers. Drilling Tools: Drill machine set with workstation.Drill bit set and vice (rmal). Screwdrivers & Soldering Tools: Precision screwdriver set, electric screwdriver set, soldering kit, and soldering helping hand. Measuring & Testing Tools: Digital multi meter, digital Vernier caliper, spirit level, measuring tape, and pen electric tester. Digital oscilloscope, adapters, telescope, DIY paper microscope Power Tools: Cordless rotary multi tool, dual-temperature heat gun, air blower, and hot glue gun.Organization & Workspace: Plastic trays, pegboard, and return measuring tools 21 Intel Core i5 - 1245U Mid Level Laptop - tebook Specification: Laptop Type: Mid LevelIntel Core i5 - 1245UOperating System (Factory PreLoaded)Window 11 HomeRAM Size (GB)16Display Size (in cm) – Diagonal: 35.56 to 38.09 (14 In to 14.99 In)Capacity of Storage Drive (in GB)512 1 22 65 Inch Display Interactive Panel with CPU Size (Diagonal): 65 or higher Panel Techlogy: IPS / VA Resolution: (Minimum) 4K (3840 x 2160) Viewing Angle (Hx V): 178*178RAM: 4 GB or higher On-board memory: 32 GB or higher Input (Minimum): 3 x HDMI, 4 x USB (Out of, which min 2xUSB3.0),1 xAudio, 1 x OPS slot, 1 x USB Type C Port Output: (Minimum) 1 x HDMI, 1 x Audio The software enables teachers to generate presentations using Al in PPT or PDF format. The teachers can select their Class, Subject, Topic and language to generate the presentations. The software supports all Indian and Global languages including English, Hindi, Marathi, Kannada, Tamil, Telugu, Gujarati, etc. Using Al, the software is able to analyse the Class and Subject and generate output accordingly. Using the Ask Me Anything tool, the teachers can search queries related to any topic and the Al is able to generate Class-wise and Subject-wise results including Images, Videos (YouTube Videos) and Explanation. Connected Classroom Software has in-built Generative Al capability to search and import filtered content relevant to Class and Subject. - images, videos, explanation for queries given by teachers in all languages. Teachers are able to import images and videos for teaching in class. The software has a text-to-speech function (for all languages) to convert text-based explanation into speech and read out loud in class. Software has Two-Way Live Conferencing Feature with education specific features Live conferencing feature also enables recording which gets directly uploaded to cloud.. Reports: Detailed reports for Attendance, Assessments, Study Material, are available for administrators to access. Administrators should be able to access to view the whiteboard saved by the teachers and monitor the usage.. Below tools and simulations are provided for enhancing the teaching-learning experience: - Graph: Demonstrating equations using 2D and 3D visualizations - Calculator: Standard and scientific - PHET simulation library with 100+ simulations across Maths, Physics, Chemistry, Biology. 1 23 2 kVA OFF LINE UPS Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete 1 24 Battery 75/80 AH capacity Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 1 25 6Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required s. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 37 26 8 Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required s. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 27 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire with switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 1 28 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire without switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box 1 29 1.5 mm2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1 30 Fans : 48 Sweep (1200 mm) Regular model Supplying capacitor type ceiling fan complete with down rod blades, shackle, capies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 1 31 LED Down Light 15-18W Supplying of recess mounting n integrated type LED down light W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 1 32 Fall Ceiling for Invation lab to cover entire Area Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. 1 33 Floor Mat for Invation lab to Cover the entire Lab Providing and laying lileum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, labour, complete as per specifications 1 34 Repair and Replacement of Windows and Doors (if required) Repairing door and window frames with available wood to the required size. 1 35 Painting Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² 1 38 with paint of approved quality to give an even shade, after thoroughly rooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-ccharge. (The gloss should be 50% @ 60 degree angle with 10 years life) 36 Providing and laying Cement concrete flooring 40 mm thick with 20 mm minal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry complete.(P .59, SI. 9.1 PWD SR 2023-24 Volume 2) 1 37 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.( SI. 8.33.1 PWD SR 2023-24 Volume 2) 1 38 Polyurethane based ingle Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2 , having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content t less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2 , and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification (P .A-149, SI. 15.2 PWD SR 2023-24 Volume 1) 1 39 Model Table - Modular Table with MDF Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface t to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 1 40 Student Table - Modular Table with Particle Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to 1 39 be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface t to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 41 Trainer Table - Executive Table with Pedestal, 3 Side Storage Unit 1 42 Student Chair – Providing and supplying Unbranded wood chair/stool, already assembled Technical Specifcation Chair feature painting. Color-Other, Style Traditional. Furniture Assembly Already Assembled. Material Wood. Additional Parameters Additional Features good quality wooden arm chairs. 1 43 Trainer Chair - Revolving Chair with Synchronic tilt mechanism 1 44 Training of Teachers The Master Trainer will conduct a 2-day Training of Trainers (ToT) program for educators on effectively utilizing the Invation Lab . The training should cover hands-on learning methodologies, STEM education, and practical applications of lab tools and techlogies (P .A-48, SI. 1 PWD SR 2023-24 Volume 1)
Contract Date: Ref. Documents Contract Value : ₹ 53.34 Lakh
Government Departments No of Bidders 1
Karnataka View Result →
46.
Housing Urban and Rular Development #8768130 AOC
Providing, Supplying, Commissioning Of Innovation Lab Equipments For Ghs Yettinabudihal Village In Ballari Taluk, Under 2515 Kkrdb Cmdq For The Year 2024-25. -Six Axis Robotic ARM Consists of •Axis – 6 axis•64- bit ARM Cortex Processor8GB RAM64 GB Storage CapacityServo Motors with 9.6 Kg/cm Torque Payload – 200gReach – 200 mmUSB Support port Should have 8 MP Camera User can add various objects for detection Should identify pre trained Objects Should perform pick and place operation Dimension in mm(D x H): 1100 x 600 One pair of PCB and Mechanical casing should be provided 1 2 Petro robot it should consists of Should have 8 MP Camera 64 bit ARM Cortex Processor 2-D Lidar Sensor Person Recognitiobject Recognition Should consists of 4 leg armShould perform forward and reverse motion Should have rechargeable battery Should have 12 V rechargeable BatteryPower Adapter for Battery Recharge •Dimension in cm (L x W x H): 62 x 20 x 45•One pair of PCB and Mechanical casing should be provided •Tasks performed: 1. Walking2. Running3. Pushups4. Dance5. Jumping6. Sit and Stand positions7. Lane following 1 3 Line Following robo car it should consists of A Robotic car with 4 wheelsShould have 2 IR sensors Should have 4 DC motors Atmega 328P Microcontroller L298 Motor Driver for Direction and Speed control Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5 Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: Straight Weight: 250gm•One pair of PCB and Mechanical casing should be provided 1 4 Obstacle avoidance robo car it shouldconsists of Robotic Car with 4 Wheels Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8 Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 5 Voice controlled Robo Car it should consists of 1 30 Robotic Car with 4 Wheels DC motors with drivesBluetooth controllerShould perform motions by voice command Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22 mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (KgCm): 0.8Gearbox Shape: Straight Weight: 250gm •One pair of PCB and Mechanical casing should be provided 6 RC Tank Robot RC Tank Chassis Kit – 01ESP32 controllerLED Switch4 DC motors with Drive Battery 4 DC motors with drive ESP32 controllerDimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 7 AI Humaid Robot The AI Humaid robot can realize human body induction in different directions, can perform facial recognition, supports voice interaction, and can realize the function of guiding navigation and explaining. Should have obstacle avoidance algorithm, perceive the real-time changes in the surrounding environment, bypass the obstacles in the planned path, and choose the appropriate route Go forward and finally reach the target point. The robot should have a touchable high-definition display screen, which should display, video playback, product information query, map display and other functions. The robot should have an open SDK package and an open API, which can be used for development according to the application scenario, adding exclusive personality functions, and more in line with the actual application scenario. Technical specifications include a user-friendly interface, robust security measures, seamless integration, efficient performance, and scalability. Specification: Processor: Intel i5 8th Gen Motors: DC motors for smooth and precise movement.Microphone: High-sensitivity microphone for voice recognition and interaction.Speakers: High-quality speakers for audio output and ntertainment. Display: LCD display for user interaction, information visualization. Dimension in cm(L x W x H): 50 x 54 x 100 1 8.1 IoT Pack IoT Based Smart Agriculture Smart Agriculture model should include an Raspberry Pi, a 10 inch LCD display, soil moisture sensor, water pump, and relay to automate irrigation for plants. The soil moisture sensor should continuously monitor the moisture levels in the soil. When the soil is wet, the relay should remain off, preventing the pump from operating. However, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. The LCD display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. Constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart techlogy in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. Microcontroller: Raspberry piSoil Moisture Sensor – Measures soil humidity levels.DHT11/DHT22 Sensor – Monitors temperature and humidity.pH Sensor – Checks soil acidity or alkalinity.LDR (Light Sensor) – Detects sunlight intensity.Rain Sensor – Detects rainfall for irrigation control.Ultrasonic Sensor – Monitors water level in tanks.Water Pump – Automated irrigation control via relay.Servo Motor – Adjusts solar panel orientation.Relay Module (5V) – Controls high-power devices.IoT Connectivity – Data transmission via WiFi/Bluetooth.Cloud Storage – Stores real-time sensor data online.Web App – Displays real-time farm conditions.Power Adapter – Powers all connected components. 1 8.2 IoT Based Home Automation The Home Automation System model should include a Raspberry Pi, MQ-2 gas 1 31 sensor, buzzer, ultrasonic sensor, servo motor, 7-inch display, DHT11 temperature sensor, and two relays to enhance home convenience and safety. The ultrasonic sensor should detect approaching objects, triggering the servo motor to automatically open the door, while the 7-inch display presents real-time temperature readings. In one room, an IR sensor should detect motion, activating the relay to turn on an LED and a fan. Additionally, when the MQ-2 sensor detects smoke in the kitchen, the buzzer should sound an alert until the smoke dissipates. The system must feature a durable plastic body for reliability and easy assembly, showcasing the seamless integration of smart techlogies to create a safer and more efficient living environment, ensuring enhanced convenience and security. Microcontroller: Raspberry Pi for central control with WiFi and Bluetooth Ram: 4GB64 bit ARM Cortex ControllerGas Detection: MQ-2 sensor to detect smoke and gas leaksAlert System: Buzzer sounds when smoke is detectedObject Detection: Ultrasonic sensor detects approaching objects for automatic door controlDoor Mechanism: Servo motor opens the door upon object detectionDisplay: 7-inch screen for real-time temperature and system statusTemperature Monitoring: DHT11 sensor measures room temperature and humidityMotion Detection: IR sensor detects movement in the room Relay Module (x2): Controls LED and fan activationLighting & Ventilation: LED and fan turn on when motion is detectedBody: Durable plastic for reliability and easy assembly 8.3 Smart Watch health parameter monitoring kit Smart Watch is an invative wearable device project, and the model should include an ESP processor, OLED display, and four push buttons to provide a range of functionalities. The watch must feature a custom-designed PCB for compactness and efficiency, along with a durable watch belt for comfortable wear. One push button should be dedicated to displaying the current time, date, and day, while ather button should provide weather information, enhancing convenience for users. The remaining two buttons should be integrated for the IoT interface, allowing interaction with various smart devices and applications. This project demonstrates the potential of combining advanced techlogy with practical design, creating a multifunctional smartwatch that caters to modern lifestyle needs, ensuring reliability and user-friendly operation. ESP Processor – Core controller for smartwatch operations. OLED Display – Displays time, date, weather, and IoT interactions. Four Push Buttons – Dedicated for time, date, weather, and IoT control. Custom-Designed PCB – Ensures compactness and efficiency. Durable Watch Belt – Provides comfort for daily wear. Time, Date, and Day Display – Activated by a dedicated button. Weather Information Display – Accessed via a separate button. IoT Integration – Controls and interacts with smart devices. Energy-Efficient Design – Optimized for long battery life. Modern & User-Friendly – Enhances convenience and usability. 1 8.4 IoT Based Smart Cam Vision Snap should consist of an advanced security system that includes facial recognition for identifying individuals, enhancing security in restricted areas. Key components include a Raspberry Pi, a camera, and a display for real-time monitoring. This system features motion detection, which triggers alerts for unauthorized movement, significantly improving surveillance capabilities. It provides real-time alerts, enabling immediate responses to potential threats, while secure connectivity ensures the protection of sensitive data. Together, these features create a robust security solution for various applications, making Vision Snap an effective tool for safeguarding premises and enhancing overall security measures. Raspberry Pi – Central processing unit for AI-based security.Camera Module – Captures real-time footage and facial recognition.Display Screen – Shows live monitoring and alerts.Facial Recognition – Identifies individuals for security access.Motion Detection – Detects unauthorized movement and triggers alerts.Real-Time Alerts – Sends tifications for immediate response.Secure Connectivity – Protects sensitive surveillance data.AI-Powered Surveillance – 1 32 Enhances monitoring efficiency.Remote Access – Allows monitoring from any location.Robust Security System – Ideal for restricted areas and premises. 9.1 Immersive Techlogy Pack VR Headset Kit Should Consist of Following Line Item VR Head Set Storage: 512GBDisplay: Each eye experiences a resolution of 2064 x 2208 pixels, delivering sharp and immersive visuals.Processor: Powered by the Snapdragon XR2 Gen 2 chipset, providing enhanced performance for demanding VR applications.Refresh Rate: Supports a 120Hz refresh rate, ensuring smooth and responsive gameplay.Memory: Equipped with 8GB of RAM to handle multitasking and complex VR environments.Mixed Reality Capabilities: Features full-color passthrough, allowing users to blend virtual and real-world elements seamlessly.Design: Utilizes pancake optics to reduce the headsets size, offering a more comfortable fit for extended use. 1 9.2 32-inch or more smart LED TV to Stream a VR applications Resolution: HD (720p)Smart Platform: Google TVFeatures: Google Play, Google Cast Built-in, HDR10, Dolby Audio, Voice Remote, Live TV Streaming 1 9.3 AA Batteries – 10 Voltage: 3.7V (Lithium-Ion)Capacity: 1800–3500 mAhChemistry Types: Alkaline, NiMH (Rechargeable), Lithium, Zinc-CarbonSize: Diameter ~14.5mm, Length ~50.5mmWeight: ~23g to 30g 1 9.4 6DoF AR-VR Educational Controller can be used as and augmented reality (AR) device. Hold virtual heart, lungs, disaurs, plants and so much more in your hand to get an engaging learning experience. AR provides students with opportunities to deepen their kwledge within several areas, including:ScienceWorking with numbersSpatial concepts Content creationReal-life environments & scenarios 1 9.5 Samsung Galaxy M15 5G or ARCore supported Devices Display: 6.5-inch Super AMOLED, 1080 x 2340 pixelsProcessor: MediaTek Dimensity 6100+, Octa-coreRAM & Storage: 4GB/6GB/8GB RAM, 28GB/256GB storage (expandable up to 1TB)Rear Cameras: 50MP (wide) + 5MP (ultra-wide) + 2MP (macro)Front Camera: 13MPBattery: 6,000mAh, 25W fast charging OS: Android 14 with One UI 6Security: Side-mounted fingerprint sensor Connectivity: 5G, NFC supportDimensions: 160.1 x 76.8 x 9.3mm, Weight : 217g 1 9.6 VR Application Content for experintial learning a) VR chemistry lab, b) VR human anatomy, c) VR tour guide, d) VR English Learning App, e) VR space exploration app, f) VR electrical simulator app, g) VR Based Lathe Machine app, h) VR Based SMD Soldering & De soldering app 1 10 Drone Kit Should Consist of Following Line Item. Drone Kit with Wi-Fi and Camera is an ideal project for enthusiasts looking to build a custom drone from the ground up. This kit typically includes essential components such as a frame, brushless motors (BLDC), electronic speed controllers (ESCs), a flight controller board (FCB), and a Wi-Fi-enabled camera for real-time video transmission. It offers the flexibility of adding a LiPo battery for power, a remote controller, and propellers for flight stability. With built-in WiFi, users can easily control and monitor the drone using a mobile app or computer, while the camera provides aerial photography and video streaming capabilities. 1 x F450 Frame 4 x 1000kv BLDC Motor 4 x ESC Motor 1 x 2-3 Cell Battery Charger1 x 2200 mAh Lipo Battery1 x Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver1 x APM 2.8 Flight Controller (Without Compass) 1 11.1 Mini Makers Pack Thermo Sage Thermo Sage is a touch-free temperature monitoring system, and the model should include an ESP8266, OLED display, infrared temperature sensor, ultrasonic sensor, two LEDs, and a buzzer for efficient health monitoring. When the ultrasonic sensor detects a person within 10 cm, the infrared sensor measures their body temperature, displaying the result on the OLED screen. If the temperature is 1 33 rmal, the green LED lights up as an indication. However, if the temperature exceeds the rmal range, the red LED activates, and the buzzer sounds an alert. The design must feature a durable plastic body for reliable performance, offering a safe, contactless solution for monitoring body temperature, ideal for public health and safety applications. Microcontroller: ESP8266 for wireless connectivityDisplay: OLED screen for temperature readingsTemperature Sensor: Infrared sensor for touch-free measurementDistance Sensor: Ultrasonic sensor to detect person within 10 cmLED Indicators: Green LED for rmal temperature, red LED for high temperatureBuzzer: Alerts when temperature is above rmal rangeBody: Durable plastic for reliable performanceOne pair of PCB and Mechanical Design will be provided 11.2 Sun Quest Sun Quest model should include an Ardui Na, two LDR modules, a servomotor, a solar panel, and two LEDs to maximize energy efficiency. The LDR modules detect light intensity, enabling the system to track the sun’s position. When one LDR senses higher light intensity, the servo motor should rotate the solar panel toward that direction to optimize energy capture. The LEDs connected to the solar panel will demonstrate real-time power generation, lighting up to show how current is produced as the panel adjusts. The design must feature a durable plastic body for longevity, enhancing solar energy efficiency by dynamically following the sun’s path throughout the day. Microcontroller: Ardui Na for system controlLight Sensors: Two LDR modules for detecting light intensityActuator: Servo motor for rotating the solar panelSolar Panel: Generates and demonstrates power outputLED Indicators: Show real-time power generationBody: Durable plastic for longevity One pair of PCB and Mechanical Design will be provided 1 11.3 LightScape Lightscape model should include an Ardui Na, LDR module, IR sensor, and 6 LEDs to optimize energy usage based on environmental conditions. When the LDR detects darkness (indicating nighttime), the system should activate, keeping 3 LEDs ON for basic lighting. When the IR sensor detects movement, all 6 LEDs should turn ON for 5 seconds to enhance visibility for pedestrians or vehicles, then return to 3 LEDs ON. During daylight, when the LDR senses light, the LEDs should remain OFF to conserve energy. The design must feature a durable plastic body for reliability, providing efficient, adaptive street lighting that responds to both time of day and movement, significantly improving energy conservation and safety on the streets. Microcontroller: Ardui Na for system automationSensors: LDR for detecting light levels, IR sensor for motion detectionLEDs: 6 LEDs for adaptive street lightingLighting Control: 3 LEDs ON at night, all 6 ON when motion is detected for 5 secondsEnergy Conservation: LEDs OFF during daylight Body: Durable plastic for reliabilityOne pair of PCB and Mechanical Design will be provided 1 11.4 Navwave NavWave is a sonar-inspired object detection system, and the model should include an ESP8266, OLED display, ultrasonic sensor, and servo motor to detect and display nearby objects. The ultrasonic sensor, mounted on the servo motor, should continuously rotate from 0 to 180 degrees, scanning the surroundings for obstacles. As objects are detected, the system should display a dotted pattern on the OLED screen, similar to a submarine radar interface, providing a real-time visual representation of object proximity and location. The design must feature a durable plastic body for reliability, simulating sonar navigation and offering a dynamic way to monitor nearby obstacles through the rotating ultrasonic sensor and radar-like display. Its robust design ensures optimal performance in various environments, making it an excellent tool for obstacle detection and navigation. •Microcontroller: ESP8266 for processing and wireless capabilityDisplay: OLED screen with radar-like visual representationSensor: Ultrasonic sensor for object detectionActuator: Servo motor for 0°-180° scanning motionDetection Mechanism: Real-time scanning and obstacle mappingBody: Durable plastic for reliabilityOne pair of PCB and Mechanical 1 34 Design will be provided 12 Electronics & Hardware Kit Universal Electrical/Electronic breadboard plug and play training kit designed to perform the experiments from the basic to advance level of electrical and electronics exercises, This kit is made easy to conduct experiments by plugging in the components in to the specifically designed breadboard. Should have built-in Function generator, power supply and required meters List of components Resistors SetPotentiometers n-linear resistors VDR-, LDR-, NTC-, PTC resistors Capacitors SetTransformer 1 13.1 Experiential Skilling Lab set Electrical Booth Spec - 01 Each workstation should have dimensions of 4 ft width and 6 ft height. The material used for the workstations construction must be high-quality plywood with a thickness of at least 10mm, ensuring durability and stability. The workstation should be designed in a plus-shaped configuration, where each arm of the plus symbol represents an individual training domain. The work station should have 4 station where, Electrical installation, Plumbing and CCTV installation can be practiced All necessaries aids for this training should be provided in this work station 1 13.2 CCTV Installation kit To provide a comprehensive training setup for students to learn and practice the installation, configuration, and maintenance of CCTV systems, including cabling, DVR setup, and network integration for monitoring and recording. Dome Cameras –1 Bullet Camera-1 DVR/NVR Unit -1 Cables and AccessoriesPower Supply with adaptorsSwitch and RouterDisplay and MonitoringNetworking Tools 1 13.3 Domestic Electric Wiring Kit To provide a comprehensive training setup for students to learn and practice the installation, wiring, and maintenance of domestic Electric wiring methods, includes reading and understanding electrical drawings, Switch gears and colour coding of cables. Domestic electric wiring kit – 1 set MCB, 4P, 25ADistribution Box 3 tier 36 modules RCCB 2P 40A 30mA ACtypeMCB xC60 1P 2A C 10000A6A 1-WAY SWITCH 6A 2-way Switch6A/16A 3-Pin Socket Outlet PVC Casing-Capping, 50mmPVC CasingCapping, 25mmPVC Conduit, High density, 19mmSaddles, 19 mmPOP screwPVC Junction Box 19mm, 1 wayPVC Junction Box 19mm, 2 wayPVC Junction Box 19mm, 3 wayPVC Junction Box 19mm, 4 wayBatten Holder2- Module Box with surface plate, PVC4-Module Box, PVC8-Module Box, PVCTools – 1 set 12V Cordless Drill machinePhilip bit Spirit Level, 30 cm Steel Rule, 30 Cm Wire Stripper Heavy duty cable cutter Try square Measurement tape Mini Hack Saw frame with blades Hack Saw Frame with blades Crimping tool, tube type lugs File Set Electrician knifeAllen key set Hole saw, 22 mm Screw Driver set se plier Drill Bit Set Mini screw driver set Aluminum Stair Case, 3 step 1 13.4 Plumbing Installation Setup To equip a plumbing training lab with all necessary tools and equipment to provide students with hands-on experience in basic and advanced plumbing techniques, including pipe fitting, jointing, fixture installation, and system testing. Tools for Pipe Cutting and ShapingPipe Cutter:Hacksaw:Pipe Bender:PVC Pipe Cutting Scissors:Tools for Threading and JoiningPipe Threaded Set: Teflon Tape Dispenser:Plumbers Soldering Kit:Adhesive Application Kit: Wrenches and SpannersAdjustable Pipe Wrench:Basin Wrench:Ring Spanner Set:Testing and Measurement ToolsWater Pressure Gauge: Flow Rate Meter:Leak Detection Kit: Spirit Level:Plumbing Fixtures for Installation PracticeSink and Basin Fixtures:Faucets and Taps:Shower Unit: Drainage System ComponentsP-traps and S-traps:Wastewater Pipes:Junction Boxes: 1 14 Smart Solar Renewable Energy Kit Solar Photovoltaic Training Kit for Lab experimentsPV Module Stand: 2s. 1 35 15 SAM S-5 Missile Educational Training Kit Missile defense systems are essential for national security, airspace protection, and strategic deterrence. This will explore the working principles of the missile system, focusing on its launch mechanism, guidance techlogy, and interception capabilities. Additionally, it will analyze the applications of the model in air defense, including target tracking, threat neutralization, and military strategy. SAM S-5 Missile System should consist of the following items. Raspberry Pi x 1Camera Module x 1Lidar or Ultrasonic sensor x 1 Servo MotorsGyroscope x 1Shooter x 1Battery x 1 Battery Adapter x 1 1 16 GEO Satellite Communication Educational Training Kit Satellites play a crucial role in modern communication, navigation, weather forecasting, and scientific research. This will explore the communication and data transmission process in GEO satellites analyze the applications of GEO satellites in telecommunications, weather forecasting, and remote sensing. GEO Satellite Communication Kit should consist of the following items. Raspberry Pi x 3ESP8266 x 3ZigBee Module and adapter x 3 RF Module x 3 Temperature and Humidity Sensor x 2 Soil Moisture Sensor x 1 NPK Sensor x 1 Pressure Sensor x 2Co2 Sensor x 1Camera Module x 1Buzzer x 3 LEDsRover Model x 1Base station Model x 1Battery Battery Adapter 1 17 LUNAR PATH Explorer- Educational Rover BOT It should comes with Matt finished metal chassis. Included all sensor metal clamps, and high torque DC Johnson A grade motors. Compatible with Ardui, raspberry, etc. Easy to assemble. Assembly manual provided in the kit. All required components, sensors, and tools are provided in the kit. It should consists of following items: 12V DC 10 RPM MOTORS -2ULTRASONIC SENSORS - 3IR SENSORS - 5 WIDE TRACK WHEELS - 4WIDE TRACK BELTNUT BOLTSSPANNER TWO IN ONE SCREWDRIVER,JUMPER WIRESSG90 SERVO MOTOR -1 ON/OFF ROCKER SWITCH -2TOGGLE SWITCH - 2MOTOR WIRES 1 18 Package . 1 Atal Tinkering Lab The package should include all items As per QR/specification for Package . 1 - Atal Tinkering Lab of NITI AAYOG Electronics Development, Robotics, Internet of Things and Sensors approved by NITI AAYOG (Approved Copy of Qrs / Specification uploaded in Gem portal) Specification: Microcontrollers & Boards:Ardui U/Na/Mega (or equivalents).Raspberry Pi 3 Model B+.ESP32, de MCU.Prototyping Tools:Solderless breadboards (400 and 800 pins).Self-adhesive proto shield and FR2 A-grade materials.Hook-up wires, jumper cables (M-M, M-F, F-F), and alligator connectors.Sensors & Modules:Wide range of sensors: Humidity, temperature, motion, gas (MQ series), IR, ultrasonic, PIR, and more.RFID Reader, Bluetooth, GSM, GPS, and Wi-Fi modules.Capacitive touch, soil moisture, rain, and color recognition sensors.Displays & Actuators:16x2 LCD display with I2C interface. LED matrices, RGB LEDs, and various single-color LEDs.Motors: DC, stepper, servo, vibrating, and BO motor with driver modules.Miscellaneous Components: Resistor and capacitor kits, diodes, transistors, and ICs (LM555).Relays, motor drivers, and piezoelectric plates.Robotics, drone, and application-specific DIY kitsPower & Connectivity:USB cables, battery packs, power banks, and clips. 1 19 Package . 2 Atal Tinkering Lab – Rapid Prototyping Tools The Package should include all items As per QR/specification for Package .2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG Specifications: 3D Printer Kit and tools Dedicated UPS/Power back up Filament for 3D printer Filament Storage Box Set of Arts & Crafts Accessories – e.g.- stationary items and basic prototyping materials 1 20 Package . 3 Atal Tinkering Lab – Mechanical, Electrical and Measurement Tools The package should include all items As per QR/specification for Package .3 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI 1 36 AAYOG Specification: Cutting Tools: Hacksaw frame with blades (standard & mini).File set, mini file set, and flexible cutting mat. Hand Tools: Pliers (4.5-inch), tweezers, ball pein hammer, claw hammer, C-clamp, spanner set, Allen key set, wrench, and wire strippers. Drilling Tools: Drill machine set with workstation.Drill bit set and vice (rmal). Screwdrivers & Soldering Tools: Precision screwdriver set, electric screwdriver set, soldering kit, and soldering helping hand. Measuring & Testing Tools: Digital multi meter, digital Vernier caliper, spirit level, measuring tape, and pen electric tester. Digital oscilloscope, adapters, telescope, DIY paper microscope Power Tools: Cordless rotary multi tool, dual-temperature heat gun, air blower, and hot glue gun.Organization & Workspace: Plastic trays, pegboard, and return measuring tools 21 Intel Core i5 - 1245U Mid Level Laptop - tebook Specification: Laptop Type: Mid LevelIntel Core i5 - 1245UOperating System (Factory PreLoaded)Window 11 HomeRAM Size (GB)16Display Size (in cm) – Diagonal: 35.56 to 38.09 (14 In to 14.99 In)Capacity of Storage Drive (in GB)512 1 22 65 Inch Display Interactive Panel with CPU Size (Diagonal): 65 or higher Panel Techlogy: IPS / VA Resolution: (Minimum) 4K (3840 x 2160) Viewing Angle (Hx V): 178*178RAM: 4 GB or higher On-board memory: 32 GB or higher Input (Minimum): 3 x HDMI, 4 x USB (Out of, which min 2xUSB3.0),1 xAudio, 1 x OPS slot, 1 x USB Type C Port Output: (Minimum) 1 x HDMI, 1 x Audio The software enables teachers to generate presentations using Al in PPT or PDF format. The teachers can select their Class, Subject, Topic and language to generate the presentations. The software supports all Indian and Global languages including English, Hindi, Marathi, Kannada, Tamil, Telugu, Gujarati, etc. Using Al, the software is able to analyse the Class and Subject and generate output accordingly. Using the Ask Me Anything tool, the teachers can search queries related to any topic and the Al is able to generate Class-wise and Subject-wise results including Images, Videos (YouTube Videos) and Explanation. Connected Classroom Software has in-built Generative Al capability to search and import filtered content relevant to Class and Subject. - images, videos, explanation for queries given by teachers in all languages. Teachers are able to import images and videos for teaching in class. The software has a text-to-speech function (for all languages) to convert text-based explanation into speech and read out loud in class. Software has Two-Way Live Conferencing Feature with education specific features Live conferencing feature also enables recording which gets directly uploaded to cloud.. Reports: Detailed reports for Attendance, Assessments, Study Material, are available for administrators to access. Administrators should be able to access to view the whiteboard saved by the teachers and monitor the usage.. Below tools and simulations are provided for enhancing the teaching-learning experience: - Graph: Demonstrating equations using 2D and 3D visualizations - Calculator: Standard and scientific - PHET simulation library with 100+ simulations across Maths, Physics, Chemistry, Biology. 1 23 2 kVA OFF LINE UPS Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete 1 24 Battery 75/80 AH capacity Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 1 25 6Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required s. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 37 26 8 Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required s. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 27 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire with switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 1 28 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire without switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box 1 29 1.5 mm2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1 30 Fans : 48 Sweep (1200 mm) Regular model Supplying capacitor type ceiling fan complete with down rod blades, shackle, capies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 1 31 LED Down Light 15-18W Supplying of recess mounting n integrated type LED down light W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 1 32 Fall Ceiling for Invation lab to cover entire Area Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. 1 33 Floor Mat for Invation lab to Cover the entire Lab Providing and laying lileum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, labour, complete as per specifications 1 34 Repair and Replacement of Windows and Doors (if required) Repairing door and window frames with available wood to the required size. 1 35 Painting Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² 1 38 with paint of approved quality to give an even shade, after thoroughly rooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-ccharge. (The gloss should be 50% @ 60 degree angle with 10 years life) 36 Providing and laying Cement concrete flooring 40 mm thick with 20 mm minal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry complete.(P .59, SI. 9.1 PWD SR 2023-24 Volume 2) 1 37 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.( SI. 8.33.1 PWD SR 2023-24 Volume 2) 1 38 Polyurethane based ingle Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2 , having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content t less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2 , and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification (P .A-149, SI. 15.2 PWD SR 2023-24 Volume 1) 1 39 Model Table - Modular Table with MDF Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface t to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 1 40 Student Table - Modular Table with Particle Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to 1 39 be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface t to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 41 Trainer Table - Executive Table with Pedestal, 3 Side Storage Unit 1 42 Student Chair – Providing and supplying Unbranded wood chair/stool, already assembled Technical Specifcation Chair feature painting. Color-Other, Style Traditional. Furniture Assembly Already Assembled. Material Wood. Additional Parameters Additional Features good quality wooden arm chairs. 1 43 Trainer Chair - Revolving Chair with Synchronic tilt mechanism 1 44 Training of Teachers The Master Trainer will conduct a 2-day Training of Trainers (ToT) program for educators on effectively utilizing the Invation Lab . The training should cover hands-on learning methodologies, STEM education, and practical applications of lab tools and techlogies (P .A-48, SI. 1 PWD SR 2023-24 Volume 1)
Contract Date: Ref. Documents Contract Value : ₹ 53.34 Lakh
Government Departments No of Bidders 1
Karnataka View Result →
47.
Housing Urban and Rular Development #8768112 AOC
Tender For Providing, Supplying, Commissioning Of Innovation Lab Equipments For Ghs Yerragudi Village In Ballari Taluk, Under 2515 Kkrdb Cmdq For The Year 2024-25.-Six Axis Robotic ARM Consists of •Axis – 6 axis•64- bit ARM Cortex Processor8GB RAM64 GB Storage CapacityServo Motors with 9.6 Kg/cm Torque Payload – 200gReach – 200 mmUSB Support port Should have 8 MP Camera User can add various objects for detection Should identify pre trained Objects Should perform pick and place operation Dimension in mm(D x H): 1100 x 600 One pair of PCB and Mechanical casing should be provided 1 2 Petro robot it should consists of Should have 8 MP Camera 64 bit ARM Cortex Processor 2-D Lidar Sensor Person Recognitiobject Recognition Should consists of 4 leg armShould perform forward and reverse motion Should have rechargeable battery Should have 12 V rechargeable BatteryPower Adapter for Battery Recharge •Dimension in cm (L x W x H): 62 x 20 x 45•One pair of PCB and Mechanical casing should be provided •Tasks performed: 1. Walking2. Running3. Pushups4. Dance5. Jumping6. Sit and Stand positions7. Lane following 1 3 Line Following robo car it should consists of A Robotic car with 4 wheelsShould have 2 IR sensors Should have 4 DC motors Atmega 328P Microcontroller L298 Motor Driver for Direction and Speed control Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5 Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: Straight Weight: 250gm•One pair of PCB and Mechanical casing should be provided 1 4 Obstacle avoidance robo car it shouldconsists of Robotic Car with 4 Wheels Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8 Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 5 Voice controlled Robo Car it should consists of 1 30 Robotic Car with 4 Wheels DC motors with drivesBluetooth controllerShould perform motions by voice command Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22 mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (KgCm): 0.8Gearbox Shape: Straight Weight: 250gm •One pair of PCB and Mechanical casing should be provided 6 RC Tank Robot RC Tank Chassis Kit – 01ESP32 controllerLED Switch4 DC motors with Drive Battery 4 DC motors with drive ESP32 controllerDimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 7 AI Humaid Robot The AI Humaid robot can realize human body induction in different directions, can perform facial recognition, supports voice interaction, and can realize the function of guiding navigation and explaining. Should have obstacle avoidance algorithm, perceive the real-time changes in the surrounding environment, bypass the obstacles in the planned path, and choose the appropriate route Go forward and finally reach the target point. The robot should have a touchable high-definition display screen, which should display, video playback, product information query, map display and other functions. The robot should have an open SDK package and an open API, which can be used for development according to the application scenario, adding exclusive personality functions, and more in line with the actual application scenario. Technical specifications include a user-friendly interface, robust security measures, seamless integration, efficient performance, and scalability. Specification: Processor: Intel i5 8th Gen Motors: DC motors for smooth and precise movement.Microphone: High-sensitivity microphone for voice recognition and interaction.Speakers: High-quality speakers for audio output and ntertainment. Display: LCD display for user interaction, information visualization. Dimension in cm(L x W x H): 50 x 54 x 100 1 8.1 IoT Pack IoT Based Smart Agriculture Smart Agriculture model should include an Raspberry Pi, a 10 inch LCD display, soil moisture sensor, water pump, and relay to automate irrigation for plants. The soil moisture sensor should continuously monitor the moisture levels in the soil. When the soil is wet, the relay should remain off, preventing the pump from operating. However, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. The LCD display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. Constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart techlogy in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. Microcontroller: Raspberry piSoil Moisture Sensor – Measures soil humidity levels.DHT11/DHT22 Sensor – Monitors temperature and humidity.pH Sensor – Checks soil acidity or alkalinity.LDR (Light Sensor) – Detects sunlight intensity.Rain Sensor – Detects rainfall for irrigation control.Ultrasonic Sensor – Monitors water level in tanks.Water Pump – Automated irrigation control via relay.Servo Motor – Adjusts solar panel orientation.Relay Module (5V) – Controls high-power devices.IoT Connectivity – Data transmission via WiFi/Bluetooth.Cloud Storage – Stores real-time sensor data online.Web App – Displays real-time farm conditions.Power Adapter – Powers all connected components. 1 8.2 IoT Based Home Automation The Home Automation System model should include a Raspberry Pi, MQ-2 gas 1 31 sensor, buzzer, ultrasonic sensor, servo motor, 7-inch display, DHT11 temperature sensor, and two relays to enhance home convenience and safety. The ultrasonic sensor should detect approaching objects, triggering the servo motor to automatically open the door, while the 7-inch display presents real-time temperature readings. In one room, an IR sensor should detect motion, activating the relay to turn on an LED and a fan. Additionally, when the MQ-2 sensor detects smoke in the kitchen, the buzzer should sound an alert until the smoke dissipates. The system must feature a durable plastic body for reliability and easy assembly, showcasing the seamless integration of smart techlogies to create a safer and more efficient living environment, ensuring enhanced convenience and security. Microcontroller: Raspberry Pi for central control with WiFi and Bluetooth Ram: 4GB64 bit ARM Cortex ControllerGas Detection: MQ-2 sensor to detect smoke and gas leaksAlert System: Buzzer sounds when smoke is detectedObject Detection: Ultrasonic sensor detects approaching objects for automatic door controlDoor Mechanism: Servo motor opens the door upon object detectionDisplay: 7-inch screen for real-time temperature and system statusTemperature Monitoring: DHT11 sensor measures room temperature and humidityMotion Detection: IR sensor detects movement in the room Relay Module (x2): Controls LED and fan activationLighting & Ventilation: LED and fan turn on when motion is detectedBody: Durable plastic for reliability and easy assembly 8.3 Smart Watch health parameter monitoring kit Smart Watch is an invative wearable device project, and the model should include an ESP processor, OLED display, and four push buttons to provide a range of functionalities. The watch must feature a custom-designed PCB for compactness and efficiency, along with a durable watch belt for comfortable wear. One push button should be dedicated to displaying the current time, date, and day, while ather button should provide weather information, enhancing convenience for users. The remaining two buttons should be integrated for the IoT interface, allowing interaction with various smart devices and applications. This project demonstrates the potential of combining advanced techlogy with practical design, creating a multifunctional smartwatch that caters to modern lifestyle needs, ensuring reliability and user-friendly operation. ESP Processor – Core controller for smartwatch operations. OLED Display – Displays time, date, weather, and IoT interactions. Four Push Buttons – Dedicated for time, date, weather, and IoT control. Custom-Designed PCB – Ensures compactness and efficiency. Durable Watch Belt – Provides comfort for daily wear. Time, Date, and Day Display – Activated by a dedicated button. Weather Information Display – Accessed via a separate button. IoT Integration – Controls and interacts with smart devices. Energy-Efficient Design – Optimized for long battery life. Modern & User-Friendly – Enhances convenience and usability. 1 8.4 IoT Based Smart Cam Vision Snap should consist of an advanced security system that includes facial recognition for identifying individuals, enhancing security in restricted areas. Key components include a Raspberry Pi, a camera, and a display for real-time monitoring. This system features motion detection, which triggers alerts for unauthorized movement, significantly improving surveillance capabilities. It provides real-time alerts, enabling immediate responses to potential threats, while secure connectivity ensures the protection of sensitive data. Together, these features create a robust security solution for various applications, making Vision Snap an effective tool for safeguarding premises and enhancing overall security measures. Raspberry Pi – Central processing unit for AI-based security.Camera Module – Captures real-time footage and facial recognition.Display Screen – Shows live monitoring and alerts.Facial Recognition – Identifies individuals for security access.Motion Detection – Detects unauthorized movement and triggers alerts.Real-Time Alerts – Sends tifications for immediate response.Secure Connectivity – Protects sensitive surveillance data.AI-Powered Surveillance – 1 32 Enhances monitoring efficiency.Remote Access – Allows monitoring from any location.Robust Security System – Ideal for restricted areas and premises. 9.1 Immersive Techlogy Pack VR Headset Kit Should Consist of Following Line Item VR Head Set Storage: 512GBDisplay: Each eye experiences a resolution of 2064 x 2208 pixels, delivering sharp and immersive visuals.Processor: Powered by the Snapdragon XR2 Gen 2 chipset, providing enhanced performance for demanding VR applications.Refresh Rate: Supports a 120Hz refresh rate, ensuring smooth and responsive gameplay.Memory: Equipped with 8GB of RAM to handle multitasking and complex VR environments.Mixed Reality Capabilities: Features full-color passthrough, allowing users to blend virtual and real-world elements seamlessly.Design: Utilizes pancake optics to reduce the headsets size, offering a more comfortable fit for extended use. 1 9.2 32-inch or more smart LED TV to Stream a VR applications Resolution: HD (720p)Smart Platform: Google TVFeatures: Google Play, Google Cast Built-in, HDR10, Dolby Audio, Voice Remote, Live TV Streaming 1 9.3 AA Batteries – 10 Voltage: 3.7V (Lithium-Ion)Capacity: 1800–3500 mAhChemistry Types: Alkaline, NiMH (Rechargeable), Lithium, Zinc-CarbonSize: Diameter ~14.5mm, Length ~50.5mmWeight: ~23g to 30g 1 9.4 6DoF AR-VR Educational Controller can be used as and augmented reality (AR) device. Hold virtual heart, lungs, disaurs, plants and so much more in your hand to get an engaging learning experience. AR provides students with opportunities to deepen their kwledge within several areas, including:ScienceWorking with numbersSpatial concepts Content creationReal-life environments & scenarios 1 9.5 Samsung Galaxy M15 5G or ARCore supported Devices Display: 6.5-inch Super AMOLED, 1080 x 2340 pixelsProcessor: MediaTek Dimensity 6100+, Octa-coreRAM & Storage: 4GB/6GB/8GB RAM, 28GB/256GB storage (expandable up to 1TB)Rear Cameras: 50MP (wide) + 5MP (ultra-wide) + 2MP (macro)Front Camera: 13MPBattery: 6,000mAh, 25W fast charging OS: Android 14 with One UI 6Security: Side-mounted fingerprint sensor Connectivity: 5G, NFC supportDimensions: 160.1 x 76.8 x 9.3mm, Weight : 217g 1 9.6 VR Application Content for experintial learning a) VR chemistry lab, b) VR human anatomy, c) VR tour guide, d) VR English Learning App, e) VR space exploration app, f) VR electrical simulator app, g) VR Based Lathe Machine app, h) VR Based SMD Soldering & De soldering app 1 10 Drone Kit Should Consist of Following Line Item. Drone Kit with Wi-Fi and Camera is an ideal project for enthusiasts looking to build a custom drone from the ground up. This kit typically includes essential components such as a frame, brushless motors (BLDC), electronic speed controllers (ESCs), a flight controller board (FCB), and a Wi-Fi-enabled camera for real-time video transmission. It offers the flexibility of adding a LiPo battery for power, a remote controller, and propellers for flight stability. With built-in WiFi, users can easily control and monitor the drone using a mobile app or computer, while the camera provides aerial photography and video streaming capabilities. 1 x F450 Frame 4 x 1000kv BLDC Motor 4 x ESC Motor 1 x 2-3 Cell Battery Charger1 x 2200 mAh Lipo Battery1 x Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver1 x APM 2.8 Flight Controller (Without Compass) 1 11.1 Mini Makers Pack Thermo Sage Thermo Sage is a touch-free temperature monitoring system, and the model should include an ESP8266, OLED display, infrared temperature sensor, ultrasonic sensor, two LEDs, and a buzzer for efficient health monitoring. When the ultrasonic sensor detects a person within 10 cm, the infrared sensor measures their body temperature, displaying the result on the OLED screen. If the temperature is 1 33 rmal, the green LED lights up as an indication. However, if the temperature exceeds the rmal range, the red LED activates, and the buzzer sounds an alert. The design must feature a durable plastic body for reliable performance, offering a safe, contactless solution for monitoring body temperature, ideal for public health and safety applications. Microcontroller: ESP8266 for wireless connectivityDisplay: OLED screen for temperature readingsTemperature Sensor: Infrared sensor for touch-free measurementDistance Sensor: Ultrasonic sensor to detect person within 10 cmLED Indicators: Green LED for rmal temperature, red LED for high temperatureBuzzer: Alerts when temperature is above rmal rangeBody: Durable plastic for reliable performanceOne pair of PCB and Mechanical Design will be provided 11.2 Sun Quest Sun Quest model should include an Ardui Na, two LDR modules, a servomotor, a solar panel, and two LEDs to maximize energy efficiency. The LDR modules detect light intensity, enabling the system to track the sun’s position. When one LDR senses higher light intensity, the servo motor should rotate the solar panel toward that direction to optimize energy capture. The LEDs connected to the solar panel will demonstrate real-time power generation, lighting up to show how current is produced as the panel adjusts. The design must feature a durable plastic body for longevity, enhancing solar energy efficiency by dynamically following the sun’s path throughout the day. Microcontroller: Ardui Na for system controlLight Sensors: Two LDR modules for detecting light intensityActuator: Servo motor for rotating the solar panelSolar Panel: Generates and demonstrates power outputLED Indicators: Show real-time power generationBody: Durable plastic for longevity One pair of PCB and Mechanical Design will be provided 1 11.3 LightScape Lightscape model should include an Ardui Na, LDR module, IR sensor, and 6 LEDs to optimize energy usage based on environmental conditions. When the LDR detects darkness (indicating nighttime), the system should activate, keeping 3 LEDs ON for basic lighting. When the IR sensor detects movement, all 6 LEDs should turn ON for 5 seconds to enhance visibility for pedestrians or vehicles, then return to 3 LEDs ON. During daylight, when the LDR senses light, the LEDs should remain OFF to conserve energy. The design must feature a durable plastic body for reliability, providing efficient, adaptive street lighting that responds to both time of day and movement, significantly improving energy conservation and safety on the streets. Microcontroller: Ardui Na for system automationSensors: LDR for detecting light levels, IR sensor for motion detectionLEDs: 6 LEDs for adaptive street lightingLighting Control: 3 LEDs ON at night, all 6 ON when motion is detected for 5 secondsEnergy Conservation: LEDs OFF during daylight Body: Durable plastic for reliabilityOne pair of PCB and Mechanical Design will be provided 1 11.4 Navwave NavWave is a sonar-inspired object detection system, and the model should include an ESP8266, OLED display, ultrasonic sensor, and servo motor to detect and display nearby objects. The ultrasonic sensor, mounted on the servo motor, should continuously rotate from 0 to 180 degrees, scanning the surroundings for obstacles. As objects are detected, the system should display a dotted pattern on the OLED screen, similar to a submarine radar interface, providing a real-time visual representation of object proximity and location. The design must feature a durable plastic body for reliability, simulating sonar navigation and offering a dynamic way to monitor nearby obstacles through the rotating ultrasonic sensor and radar-like display. Its robust design ensures optimal performance in various environments, making it an excellent tool for obstacle detection and navigation. •Microcontroller: ESP8266 for processing and wireless capabilityDisplay: OLED screen with radar-like visual representationSensor: Ultrasonic sensor for object detectionActuator: Servo motor for 0°-180° scanning motionDetection Mechanism: Real-time scanning and obstacle mappingBody: Durable plastic for reliabilityOne pair of PCB and Mechanical 1 34 Design will be provided 12 Electronics & Hardware Kit Universal Electrical/Electronic breadboard plug and play training kit designed to perform the experiments from the basic to advance level of electrical and electronics exercises, This kit is made easy to conduct experiments by plugging in the components in to the specifically designed breadboard. Should have built-in Function generator, power supply and required meters List of components Resistors SetPotentiometers n-linear resistors VDR-, LDR-, NTC-, PTC resistors Capacitors SetTransformer 1 13.1 Experiential Skilling Lab set Electrical Booth Spec - 01 Each workstation should have dimensions of 4 ft width and 6 ft height. The material used for the workstations construction must be high-quality plywood with a thickness of at least 10mm, ensuring durability and stability. The workstation should be designed in a plus-shaped configuration, where each arm of the plus symbol represents an individual training domain. The work station should have 4 station where, Electrical installation, Plumbing and CCTV installation can be practiced All necessaries aids for this training should be provided in this work station 1 13.2 CCTV Installation kit To provide a comprehensive training setup for students to learn and practice the installation, configuration, and maintenance of CCTV systems, including cabling, DVR setup, and network integration for monitoring and recording. Dome Cameras –1 Bullet Camera-1 DVR/NVR Unit -1 Cables and AccessoriesPower Supply with adaptorsSwitch and RouterDisplay and MonitoringNetworking Tools 1 13.3 Domestic Electric Wiring Kit To provide a comprehensive training setup for students to learn and practice the installation, wiring, and maintenance of domestic Electric wiring methods, includes reading and understanding electrical drawings, Switch gears and colour coding of cables. Domestic electric wiring kit – 1 set MCB, 4P, 25ADistribution Box 3 tier 36 modules RCCB 2P 40A 30mA ACtypeMCB xC60 1P 2A C 10000A6A 1-WAY SWITCH 6A 2-way Switch6A/16A 3-Pin Socket Outlet PVC Casing-Capping, 50mmPVC CasingCapping, 25mmPVC Conduit, High density, 19mmSaddles, 19 mmPOP screwPVC Junction Box 19mm, 1 wayPVC Junction Box 19mm, 2 wayPVC Junction Box 19mm, 3 wayPVC Junction Box 19mm, 4 wayBatten Holder2- Module Box with surface plate, PVC4-Module Box, PVC8-Module Box, PVCTools – 1 set 12V Cordless Drill machinePhilip bit Spirit Level, 30 cm Steel Rule, 30 Cm Wire Stripper Heavy duty cable cutter Try square Measurement tape Mini Hack Saw frame with blades Hack Saw Frame with blades Crimping tool, tube type lugs File Set Electrician knifeAllen key set Hole saw, 22 mm Screw Driver set se plier Drill Bit Set Mini screw driver set Aluminum Stair Case, 3 step 1 13.4 Plumbing Installation Setup To equip a plumbing training lab with all necessary tools and equipment to provide students with hands-on experience in basic and advanced plumbing techniques, including pipe fitting, jointing, fixture installation, and system testing. Tools for Pipe Cutting and ShapingPipe Cutter:Hacksaw:Pipe Bender:PVC Pipe Cutting Scissors:Tools for Threading and JoiningPipe Threaded Set: Teflon Tape Dispenser:Plumbers Soldering Kit:Adhesive Application Kit: Wrenches and SpannersAdjustable Pipe Wrench:Basin Wrench:Ring Spanner Set:Testing and Measurement ToolsWater Pressure Gauge: Flow Rate Meter:Leak Detection Kit: Spirit Level:Plumbing Fixtures for Installation PracticeSink and Basin Fixtures:Faucets and Taps:Shower Unit: Drainage System ComponentsP-traps and S-traps:Wastewater Pipes:Junction Boxes: 1 14 Smart Solar Renewable Energy Kit Solar Photovoltaic Training Kit for Lab experimentsPV Module Stand: 2s. 1 35 15 SAM S-5 Missile Educational Training Kit Missile defense systems are essential for national security, airspace protection, and strategic deterrence. This will explore the working principles of the missile system, focusing on its launch mechanism, guidance techlogy, and interception capabilities. Additionally, it will analyze the applications of the model in air defense, including target tracking, threat neutralization, and military strategy. SAM S-5 Missile System should consist of the following items. Raspberry Pi x 1Camera Module x 1Lidar or Ultrasonic sensor x 1 Servo MotorsGyroscope x 1Shooter x 1Battery x 1 Battery Adapter x 1 1 16 GEO Satellite Communication Educational Training Kit Satellites play a crucial role in modern communication, navigation, weather forecasting, and scientific research. This will explore the communication and data transmission process in GEO satellites analyze the applications of GEO satellites in telecommunications, weather forecasting, and remote sensing. GEO Satellite Communication Kit should consist of the following items. Raspberry Pi x 3ESP8266 x 3ZigBee Module and adapter x 3 RF Module x 3 Temperature and Humidity Sensor x 2 Soil Moisture Sensor x 1 NPK Sensor x 1 Pressure Sensor x 2Co2 Sensor x 1Camera Module x 1Buzzer x 3 LEDsRover Model x 1Base station Model x 1Battery Battery Adapter 1 17 LUNAR PATH Explorer- Educational Rover BOT It should comes with Matt finished metal chassis. Included all sensor metal clamps, and high torque DC Johnson A grade motors. Compatible with Ardui, raspberry, etc. Easy to assemble. Assembly manual provided in the kit. All required components, sensors, and tools are provided in the kit. It should consists of following items: 12V DC 10 RPM MOTORS -2ULTRASONIC SENSORS - 3IR SENSORS - 5 WIDE TRACK WHEELS - 4WIDE TRACK BELTNUT BOLTSSPANNER TWO IN ONE SCREWDRIVER,JUMPER WIRESSG90 SERVO MOTOR -1 ON/OFF ROCKER SWITCH -2TOGGLE SWITCH - 2MOTOR WIRES 1 18 Package . 1 Atal Tinkering Lab The package should include all items As per QR/specification for Package . 1 - Atal Tinkering Lab of NITI AAYOG Electronics Development, Robotics, Internet of Things and Sensors approved by NITI AAYOG (Approved Copy of Qrs / Specification uploaded in Gem portal) Specification: Microcontrollers & Boards:Ardui U/Na/Mega (or equivalents).Raspberry Pi 3 Model B+.ESP32, de MCU.Prototyping Tools:Solderless breadboards (400 and 800 pins).Self-adhesive proto shield and FR2 A-grade materials.Hook-up wires, jumper cables (M-M, M-F, F-F), and alligator connectors.Sensors & Modules:Wide range of sensors: Humidity, temperature, motion, gas (MQ series), IR, ultrasonic, PIR, and more.RFID Reader, Bluetooth, GSM, GPS, and Wi-Fi modules.Capacitive touch, soil moisture, rain, and color recognition sensors.Displays & Actuators:16x2 LCD display with I2C interface. LED matrices, RGB LEDs, and various single-color LEDs.Motors: DC, stepper, servo, vibrating, and BO motor with driver modules.Miscellaneous Components: Resistor and capacitor kits, diodes, transistors, and ICs (LM555).Relays, motor drivers, and piezoelectric plates.Robotics, drone, and application-specific DIY kitsPower & Connectivity:USB cables, battery packs, power banks, and clips. 1 19 Package . 2 Atal Tinkering Lab – Rapid Prototyping Tools The Package should include all items As per QR/specification for Package .2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG Specifications: 3D Printer Kit and tools Dedicated UPS/Power back up Filament for 3D printer Filament Storage Box Set of Arts & Crafts Accessories – e.g.- stationary items and basic prototyping materials 1 20 Package . 3 Atal Tinkering Lab – Mechanical, Electrical and Measurement Tools The package should include all items As per QR/specification for Package .3 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI 1 36 AAYOG Specification: Cutting Tools: Hacksaw frame with blades (standard & mini).File set, mini file set, and flexible cutting mat. Hand Tools: Pliers (4.5-inch), tweezers, ball pein hammer, claw hammer, C-clamp, spanner set, Allen key set, wrench, and wire strippers. Drilling Tools: Drill machine set with workstation.Drill bit set and vice (rmal). Screwdrivers & Soldering Tools: Precision screwdriver set, electric screwdriver set, soldering kit, and soldering helping hand. Measuring & Testing Tools: Digital multi meter, digital Vernier caliper, spirit level, measuring tape, and pen electric tester. Digital oscilloscope, adapters, telescope, DIY paper microscope Power Tools: Cordless rotary multi tool, dual-temperature heat gun, air blower, and hot glue gun.Organization & Workspace: Plastic trays, pegboard, and return measuring tools 21 Intel Core i5 - 1245U Mid Level Laptop - tebook Specification: Laptop Type: Mid LevelIntel Core i5 - 1245UOperating System (Factory PreLoaded)Window 11 HomeRAM Size (GB)16Display Size (in cm) – Diagonal: 35.56 to 38.09 (14 In to 14.99 In)Capacity of Storage Drive (in GB)512 1 22 65 Inch Display Interactive Panel with CPU Size (Diagonal): 65 or higher Panel Techlogy: IPS / VA Resolution: (Minimum) 4K (3840 x 2160) Viewing Angle (Hx V): 178*178RAM: 4 GB or higher On-board memory: 32 GB or higher Input (Minimum): 3 x HDMI, 4 x USB (Out of, which min 2xUSB3.0),1 xAudio, 1 x OPS slot, 1 x USB Type C Port Output: (Minimum) 1 x HDMI, 1 x Audio The software enables teachers to generate presentations using Al in PPT or PDF format. The teachers can select their Class, Subject, Topic and language to generate the presentations. The software supports all Indian and Global languages including English, Hindi, Marathi, Kannada, Tamil, Telugu, Gujarati, etc. Using Al, the software is able to analyse the Class and Subject and generate output accordingly. Using the Ask Me Anything tool, the teachers can search queries related to any topic and the Al is able to generate Class-wise and Subject-wise results including Images, Videos (YouTube Videos) and Explanation. Connected Classroom Software has in-built Generative Al capability to search and import filtered content relevant to Class and Subject. - images, videos, explanation for queries given by teachers in all languages. Teachers are able to import images and videos for teaching in class. The software has a text-to-speech function (for all languages) to convert text-based explanation into speech and read out loud in class. Software has Two-Way Live Conferencing Feature with education specific features Live conferencing feature also enables recording which gets directly uploaded to cloud.. Reports: Detailed reports for Attendance, Assessments, Study Material, are available for administrators to access. Administrators should be able to access to view the whiteboard saved by the teachers and monitor the usage.. Below tools and simulations are provided for enhancing the teaching-learning experience: - Graph: Demonstrating equations using 2D and 3D visualizations - Calculator: Standard and scientific - PHET simulation library with 100+ simulations across Maths, Physics, Chemistry, Biology. 1 23 2 kVA OFF LINE UPS Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete 1 24 Battery 75/80 AH capacity Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 1 25 6Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required s. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 37 26 8 Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required s. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 27 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire with switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 1 28 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire without switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box 1 29 1.5 mm2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1 30 Fans : 48 Sweep (1200 mm) Regular model Supplying capacitor type ceiling fan complete with down rod blades, shackle, capies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 1 31 LED Down Light 15-18W Supplying of recess mounting n integrated type LED down light W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 1 32 Fall Ceiling for Invation lab to cover entire Area Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. 1 33 Floor Mat for Invation lab to Cover the entire Lab Providing and laying lileum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, labour, complete as per specifications 1 34 Repair and Replacement of Windows and Doors (if required) Repairing door and window frames with available wood to the required size. 1 35 Painting Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² 1 38 with paint of approved quality to give an even shade, after thoroughly rooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-ccharge. (The gloss should be 50% @ 60 degree angle with 10 years life) 36 Providing and laying Cement concrete flooring 40 mm thick with 20 mm minal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry complete.(P .59, SI. 9.1 PWD SR 2023-24 Volume 2) 1 37 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.( SI. 8.33.1 PWD SR 2023-24 Volume 2) 1 38 Polyurethane based ingle Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2 , having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content t less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2 , and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification (P .A-149, SI. 15.2 PWD SR 2023-24 Volume 1) 1 39 Model Table - Modular Table with MDF Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface t to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 1 40 Student Table - Modular Table with Particle Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to 1 39 be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface t to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 41 Trainer Table - Executive Table with Pedestal, 3 Side Storage Unit 1 42 Student Chair – Providing and supplying Unbranded wood chair/stool, already assembled Technical Specifcation Chair feature painting. Color-Other, Style Traditional. Furniture Assembly Already Assembled. Material Wood. Additional Parameters Additional Features good quality wooden arm chairs. 1 43 Trainer Chair - Revolving Chair with Synchronic tilt mechanism 1 44 Training of Teachers The Master Trainer will conduct a 2-day Training of Trainers (ToT) program for educators on effectively utilizing the Invation Lab . The training should cover hands-on learning methodologies, STEM education, and practical applications of lab tools and techlogies (P .A-48, SI. 1 PWD SR 2023-24 Volume 1)
Contract Date: Ref. Documents Contract Value : ₹ 53.34 Lakh
Government Departments No of Bidders 1
Karnataka View Result →
48.
Housing Urban and Rular Development #8768098 AOC
Providing, Supplying, Commissioning Of Innovation Lab Equipments For Ghs Banapura Village In Ballari Taluk, Under 2515 Kkrdb Cmdq For The Year 2024-25. Six Axis Robotic ARM Consists of •Axis – 6 axis•64- bit ARM Cortex Processor8GB RAM64 GB Storage CapacityServo Motors with 9.6 Kg/cm Torque Payload – 200gReach – 200 mmUSB Support port Should have 8 MP Camera User can add various objects for detection Should identify pre trained Objects Should perform pick and place operation Dimension in mm(D x H): 1100 x 600 One pair of PCB and Mechanical casing should be provided 1 YES 2 Petro robot it should consists of Should have 8 MP Camera 64 bit ARM Cortex Processor 2-D Lidar Sensor Person RecognitionObject Recognition Should consists of 4 leg armShould perform forward and reverse motion Should have rechargeable battery Should have 12 V rechargeable BatteryPower Adapter for Battery Recharge •Dimension in cm (L x W x H): 62 x 20 x 45•One pair of PCB and Mechanical casing should be provided •Tasks performed: 1. Walking2. Running3. Pushups4. Dance5. Jumping6. Sit and Stand positions7. Lane following 1 NO 3 Line Following robo car it should consists of A Robotic car with 4 wheelsShould have 2 IR sensors Should have 4 DC motors Atmega 328P Microcontroller L298 Motor Driver for Direction and Speed control Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5 Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: Straight Weight: 250gm•One pair of PCB and Mechanical casing should be provided 1 YES 4 Obstacle avoidance robo car it shouldconsists of Robotic Car with 4 Wheels Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8 Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 YES 5 Voice controlled Robo Car it should consists of Robotic Car with 4 Wheels DC motors with drivesBluetooth controllerShould perform motions by voice command Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22 mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (KgCm): 0.8Gearbox Shape: Straight Weight: 250gm •One pair of PCB and Mechanical casing should be provided 6 RC Tank Robot RC Tank Chassis Kit – 01ESP32 controllerLED Switch4 DC motors with Drive Battery 4 DC motors with drive ESP32 controllerDimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 YES 7 AI Humanoid Robot The AI Humanoid robot can realize human body induction in different directions, can perform facial recognition, supports voice interaction, and can realize the function of guiding navigation and explaining. Should have obstacle avoidance algorithm, perceive the real-time changes in the surrounding environment, bypass the obstacles in the planned path, and choose the appropriate route Go forward and finally reach the target point. The robot should have a touchable high-definition display screen, which should display, video playback, product information query, map display and other functions. The robot should have an open SDK package and an open API, which can be used for development according to the application scenario, adding exclusive personality functions, and more in line with the actual application scenario. Technical specifications include a user-friendly interface, robust security measures, seamless integration, efficient performance, and scalability. Specification: Processor: Intel i5 8th Gen Motors: DC motors for smooth and precise movement.Microphone: High-sensitivity microphone for voice recognition and interaction.Speakers: High-quality speakers for audio output and ntertainment. Display: LCD display for user interaction, information visualization. Dimension in cm(L x W x H): 50 x 54 x 100 1 YES 8.1 IoT Pack IoT Based Smart Agriculture Smart Agriculture model should include an Raspberry Pi, a 10 inch LCD display, soil moisture sensor, water pump, and relay to automate irrigation for plants. The soil moisture sensor should continuously monitor the moisture levels in the soil. When the soil is wet, the relay should remain off, preventing the pump from operating. However, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. The LCD display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. Constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart technology in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. Microcontroller: Raspberry piSoil Moisture Sensor – Measures soil humidity levels.DHT11/DHT22 Sensor – Monitors temperature and humidity.pH Sensor – Checks soil acidity or alkalinity.LDR (Light Sensor) – Detects sunlight intensity.Rain Sensor – Detects rainfall for irrigation control.Ultrasonic Sensor – Monitors water level in tanks.Water Pump – Automated irrigation control via relay.Servo Motor – Adjusts solar panel orientation.Relay Module (5V) – Controls high-power devices.IoT Connectivity – Data transmission via WiFi/Bluetooth.Cloud Storage – Stores real-time sensor data online.Web App – Displays real-time farm conditions.Power Adapter – Powers all connected components. 1 YES 8.2 IoT Based Home Automation The Home Automation System model should include a Raspberry Pi, MQ-2 gassensor, buzzer, ultrasonic sensor, servo motor, 7-inch display, DHT11 temperature sensor, and two relays to enhance home convenience and safety. The ultrasonic sensor should detect approaching objects, triggering the servo motor to automatically open the door, while the 7-inch display presents real-time temperature readings. In one room, an IR sensor should detect motion, activating the relay to turn on an LED and a fan. Additionally, when the MQ-2 sensor detects smoke in the kitchen, the buzzer should sound an alert until the smoke dissipates. The system must feature a durable plastic body for reliability and easy assembly, showcasing the seamless integration of smart technologies to create a safer and more efficient living environment, ensuring enhanced convenience and security. Microcontroller: Raspberry Pi for central control with WiFi and Bluetooth Ram: 4GB64 bit ARM Cortex ControllerGas Detection: MQ-2 sensor to detect smoke and gas leaksAlert System: Buzzer sounds when smoke is detectedObject Detection: Ultrasonic sensor detects approaching objects for automatic door controlDoor Mechanism: Servo motor opens the door upon object detectionDisplay: 7-inch screen for real-time temperature and system statusTemperature Monitoring: DHT11 sensor measures room temperature and humidityMotion Detection: IR sensor detects movement in the room Relay Module (x2): Controls LED and fan activationLighting & Ventilation: LED and fan turn on when motion is detectedBody: Durable plastic for reliability and easy assembly 8.3 Smart Watch health parameter monitoring kit Smart Watch is an innovative wearable device project, and the model should include an ESP processor, OLED display, and four push buttons to provide a range of functionalities. The watch must feature a custom-designed PCB for compactness and efficiency, along with a durable watch belt for comfortable wear. One push button should be dedicated to displaying the current time, date, and day, while another button should provide weather information, enhancing convenience for users. The remaining two buttons should be integrated for the IoT interface, allowing interaction with various smart devices and applications. This project demonstrates the potential of combining advanced technology with practical design, creating a multifunctional smartwatch that caters to modern lifestyle needs, ensuring reliability and user-friendly operation. ESP Processor – Core controller for smartwatch operations. OLED Display – Displays time, date, weather, and IoT interactions. Four Push Buttons – Dedicated for time, date, weather, and IoT control. Custom-Designed PCB – Ensures compactness and efficiency. Durable Watch Belt – Provides comfort for daily wear. Time, Date, and Day Display – Activated by a dedicated button. Weather Information Display – Accessed via a separate button. IoT Integration – Controls and interacts with smart devices. Energy-Efficient Design – Optimized for long battery life. Modern & User-Friendly – Enhances convenience and usability. 1 NO 8.4 IoT Based Smart Cam Vision Snap should consist of an advanced security system that includes facial recognition for identifying individuals, enhancing security in restricted areas. Key components include a Raspberry Pi, a camera, and a display for real-time monitoring. This system features motion detection, which triggers alerts for unauthorized movement, significantly improving surveillance capabilities. It provides real-time alerts, enabling immediate responses to potential threats, while secure connectivity ensures the protection of sensitive data. Together, these features create a robust security solution for various applications, making Vision Snap an effective tool for safeguarding premises and enhancing overall security measures. Raspberry Pi – Central processing unit for AI-based security.Camera Module – Captures real-time footage and facial recognition.Display Screen – Shows live monitoring and alerts.Facial Recognition – Identifies individuals for security access.Motion Detection – Detects unauthorized movement and triggers alerts.Real-Time Alerts – Sends notifications for immediate response.Secure Connectivity – Protects sensitive surveillance data.AI-Powered Surveillance – 1 YES 32 Enhances monitoring efficiency.Remote Access – Allows monitoring from any location.Robust Security System – Ideal for restricted areas and premises. 9.1 Immersive Technology Pack VR Headset Kit Should Consist of Following Line Item VR Head Set Storage: 512GBDisplay: Each eye experiences a resolution of 2064 x 2208 pixels, delivering sharp and immersive visuals.Processor: Powered by the Snapdragon XR2 Gen 2 chipset, providing enhanced performance for demanding VR applications.Refresh Rate: Supports a 120Hz refresh rate, ensuring smooth and responsive gameplay.Memory: Equipped with 8GB of RAM to handle multitasking and complex VR environments.Mixed Reality Capabilities: Features full-color passthrough, allowing users to blend virtual and real-world elements seamlessly.Design: Utilizes pancake optics to reduce the headsets size, offering a more comfortable fit for extended use. 1 YES 9.2 32-inch or more smart LED TV to Stream a VR applications Resolution: HD (720p)Smart Platform: Google TVFeatures: Google Play, Google Cast Built-in, HDR10, Dolby Audio, Voice Remote, Live TV Streaming 1 YES 9.3 AA Batteries – 10 Voltage: 3.7V (Lithium-Ion)Capacity: 1800–3500 mAhChemistry Types: Alkaline, NiMH (Rechargeable), Lithium, Zinc-CarbonSize: Diameter ~14.5mm, Length ~50.5mmWeight: ~23g to 30g 1 YES 9.4 6DoF AR-VR Educational Controller can be used as and augmented reality (AR) device. Hold virtual heart, lungs, dinosaurs, plants and so much more in your hand to get an engaging learning experience. AR provides students with opportunities to deepen their knowledge within several areas, including:ScienceWorking with numbersSpatial concepts Content creationReal-life environments & scenarios 1 YES 9.5 Samsung Galaxy M15 5G or ARCore supported Devices Display: 6.5-inch Super AMOLED, 1080 x 2340 pixelsProcessor: MediaTek Dimensity 6100+, Octa-coreRAM & Storage: 4GB/6GB/8GB RAM, 28GB/256GB storage (expandable up to 1TB)Rear Cameras: 50MP (wide) + 5MP (ultra-wide) + 2MP (macro)Front Camera: 13MPBattery: 6,000mAh, 25W fast charging OS: Android 14 with One UI 6Security: Side-mounted fingerprint sensor Connectivity: 5G, NFC supportDimensions: 160.1 x 76.8 x 9.3mm, Weight : 217g 1 YES 9.6 VR Application Content for experintial learning a) VR chemistry lab, b) VR human anatomy, c) VR tour guide, d) VR English Learning App, e) VR space exploration app, f) VR electrical simulator app, g) VR Based Lathe Machine app, h) VR Based SMD Soldering & De soldering app 1 YES 10 Drone Kit Should Consist of Following Line Item. Drone Kit with Wi-Fi and Camera is an ideal project for enthusiasts looking to build a custom drone from the ground up. This kit typically includes essential components such as a frame, brushless motors (BLDC), electronic speed controllers (ESCs), a flight controller board (FCB), and a Wi-Fi-enabled camera for real-time video transmission. It offers the flexibility of adding a LiPo battery for power, a remote controller, and propellers for flight stability. With built-in WiFi, users can easily control and monitor the drone using a mobile app or computer, while the camera provides aerial photography and video streaming capabilities. 1 x F450 Frame 4 x 1000kv BLDC Motor 4 x ESC Motor 1 x 2-3 Cell Battery Charger1 x 2200 mAh Lipo Battery1 x Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver1 x APM 2.8 Flight Controller (Without Compass) 1 YES 11.1 Mini Makers Pack Thermo Sage Thermo Sage is a touch-free temperature monitoring system, and the model should include an ESP8266, OLED display, infrared temperature sensor, ultrasonic sensor, two LEDs, and a buzzer for efficient health monitoring. When the ultrasonic sensor detects a person within 10 cm, the infrared sensor measures their body temperature, displaying the result on the OLED screen. If the temperature I normal, the green LED lights up as an indication. However, if the temperature exceeds the normal range, the red LED activates, and the buzzer sounds an alert. The design must feature a durable plastic body for reliable performance, offering a safe, contactless solution for monitoring body temperature, ideal for public health and safety applications. Microcontroller: ESP8266 for wireless connectivityDisplay: OLED screen for temperature readingsTemperature Sensor: Infrared sensor for touch-free measurementDistance Sensor: Ultrasonic sensor to detect person within 10 cmLED Indicators: Green LED for normal temperature, red LED for high temperatureBuzzer: Alerts when temperature is above normal rangeBody: Durable plastic for reliable performanceOne pair of PCB and Mechanical Design will be provided 11.2 Sun Quest Sun Quest model should include an Arduino Nano, two LDR modules, a servomotor, a solar panel, and two LEDs to maximize energy efficiency. The LDR modules detect light intensity, enabling the system to track the sun’s position. When one LDR senses higher light intensity, the servo motor should rotate the solar panel toward that direction to optimize energy capture. The LEDs connected to the solar panel will demonstrate real-time power generation, lighting up to show how current is produced as the panel adjusts. The design must feature a durable plastic body for longevity, enhancing solar energy efficiency by dynamically following the sun’s path throughout the day. Microcontroller: Arduino Nano for system controlLight Sensors: Two LDR modules for detecting light intensityActuator: Servo motor for rotating the solar panelSolar Panel: Generates and demonstrates power outputLED Indicators: Show real-time power generationBody: Durable plastic for longevity One pair of PCB and Mechanical Design will be provided 1 NO 11.3 LightScape Lightscape model should include an Arduino Nano, LDR module, IR sensor, and 6 LEDs to optimize energy usage based on environmental conditions. When the LDR detects darkness (indicating nighttime), the system should activate, keeping 3 LEDs ON for basic lighting. When the IR sensor detects movement, all 6 LEDs should turn ON for 5 seconds to enhance visibility for pedestrians or vehicles, then return to 3 LEDs ON. During daylight, when the LDR senses light, the LEDs should remain OFF to conserve energy. The design must feature a durable plastic body for reliability, providing efficient, adaptive street lighting that responds to both time of day and movement, significantly improving energy conservation and safety on the streets. Microcontroller: Arduino Nano for system automationSensors: LDR for detecting light levels, IR sensor for motion detectionLEDs: 6 LEDs for adaptive street lightingLighting Control: 3 LEDs ON at night, all 6 ON when motion is detected for 5 secondsEnergy Conservation: LEDs OFF during daylight Body: Durable plastic for reliabilityOne pair of PCB and Mechanical Design will be provided 1 NO 11.4 Navwave NavWave is a sonar-inspired object detection sDesign will be provided 12 Electronics & Hardware Kit Universal Electrical/Electronic breadboard plug and play training kit designed to perform the experiments from the basic to advance level of electrical and electronics exercises, This kit is made easy to conduct experiments by plugging in the components in to the specifically designed breadboard. Should have built-in Function generator, power supply and required meters List of components Resistors SetPotentiometers Non-linear resistors VDR-, LDR-, NTC-, PTC resistors Capacitors SetTransformer 1 NO 13.1 Experiential Skilling Lab set Electrical Booth Spec - 01 Each workstation should have dimensions of 4 ft width and 6 ft height. The material used for the workstations construction must be high-quality plywood with a thickness of at least 10mm, ensuring durability and stability. The workstation should be designed in a plus-shaped configuration, where each arm of the plus symbol represents an individual training domain. The work station should have 4 station where, Electrical installation, Plumbing and CCTV installation can be practiced All necessaries aids for this training should be provided in this work station 1 NO 13.2 CCTV Installation kit To provide a comprehensive training setup for students to learn and practice the installation, configuration, and maintenance of CCTV systems, including cabling, DVR setup, and network integration for monitoring and recording. Dome Cameras –1 NoBullet Camera-1 NoDVR/NVR Unit -1 No Cables and AccessoriesPower Supply with adaptorsSwitch and RouterDisplay and MonitoringNetworking Tools 1 NO 13.3 Domestic Electric Wiring Kit To provide a comprehensive training setup for students to learn and practice the installation, wiring, and maintenance of domestic Electric wiring methods, includes reading and understanding electrical drawings, Switch gears and colour coding of cables. Domestic electric wiring kit – 1 set MCB, 4P, 25ADistribution Box 3 tier 36 modules RCCB 2P 40A 30mA ACtypeMCB xC60 1P 2A C 10000A6A 1-WAY SWITCH 6A 2-way Switch6A/16A 3-Pin Socket Outlet PVC Casing-Capping, 50mmPVC CasingCapping, 25mmPVC Conduit, High density, 19mmSaddles, 19 mmPOP screwPVC Junction Box 19mm, 1 wayPVC Junction Box 19mm, 2 wayPVC Junction Box 19mm, 3 wayPVC Junction Box 19mm, 4 wayBatten Holder2- Module Box with surface plate, PVC4-Module Box, PVC8-Module Box, PVCTools – 1 set 12V Cordless Drill machinePhilip bit Spirit Level, 30 cm Steel Rule, 30 Cm Wire Stripper Heavy duty cable cutter Try square Measurement tape Mini Hack Saw frame with blades Hack Saw Frame with blades Crimping tool, tube type lugs File Set Electrician knifeAllen key set Hole saw, 22 mm Screw Driver set Nose plier Drill Bit Set Mini screw driver set Aluminum Stair Case, 3 step 1 NO 13.4 Plumbing Installation Setup To equip a plumbing training lab with all necessary tools and equipment to provide students with hands-on experience in basic and advanced plumbing techniques, including pipe fitting, jointing, fixture installation, and system testing. Tools for Pipe Cutting and ShapingPipe Cutter:Hacksaw:Pipe Bender:PVC Pipe Cutting Scissors:Tools for Threading and JoiningPipe Threaded Set: Teflon Tape Dispenser:Plumbers Soldering Kit:Adhesive Application Kit: Wrenches and SpannersAdjustable Pipe Wrench:Basin Wrench:Ring Spanner Set:Testing and Measurement ToolsWater Pressure Gauge: Flow Rate Meter:Leak Detection Kit: Spirit Level:Plumbing Fixtures for Installation PracticeSink and Basin Fixtures:Faucets and Taps:Shower Unit: Drainage System ComponentsP-traps and S-traps:Wastewater Pipes:Junction Boxes: 1 NO 14 Smart Solar Renewable Energy Kit Solar Photovoltaic Training Kit for Lab experimentsPV Module Stand: 2nos. 1 NO 35 15 SAM S-5 Missile Educational Training Kit Missile defense systems are essential for national security, airspace protection, and strategic deterrence. This will explore the working principles of the missile system, focusing on its launch mechanism, guidance technology, and interception capabilities. Additionally, it will analyze the applications of the model in air defense, including target tracking, threat neutralization, and military strategy. SAM S-5 Missile System should consist of the following items. Raspberry Pi x 1Camera Module x 1Lidar or Ultrasonic sensor x 1 Servo MotorsGyroscope x 1Shooter x 1Battery x 1 Battery Adapter x 1 1 NO 16 GEO Satellite Communication Educational Training Kit Satellites play a crucial role in modern communication, navigation, weather forecasting, and scientific research. This will explore the communication and data transmission process in GEO satellites analyze the applications of GEO satellites in telecommunications, weather forecasting, and remote sensing. GEO Satellite Communication Kit should consist of the following items. Raspberry Pi x 3ESP8266 x 3ZigBee Module and adapter x 3 RF Module x 3 Temperature and Humidity Sensor x 2 Soil Moisture Sensor x 1 NPK Sensor x 1 Pressure Sensor x 2Co2 Sensor x 1Camera Module x 1Buzzer x 3 LEDsRover Model x 1Base station Model x 1Battery Battery Adapter 1 NO 17 LUNAR PATH Explorer- Educational Rover BOT It should comes with Matt finished metal chassis. Included all sensor metal clamps, and high torque DC Johnson A grade motors. Compatible with Arduino, raspberry, etc. Easy to assemble. Assembly manual provided in the kit. All required components, sensors, and tools are provided in the kit. It should consists of following items: 12V DC 10 RPM MOTORS -2ULTRASONIC SENSORS - 3IR SENSORS - 5 WIDE TRACK WHEELS - 4WIDE TRACK BELTNUT BOLTSSPANNER TWO IN ONE SCREWDRIVER,JUMPER WIRESSG90 SERVO MOTOR -1 ON/OFF ROCKER SWITCH -2TOGGLE SWITCH - 2MOTOR WIRES 1 NO 18 Package No. 1 Atal Tinkering Lab The package should include all items As per QR/specification for Package No. 1 - Atal Tinkering Lab of NITI AAYOG Electronics Development, Robotics, Internet of Things and Sensors approved by NITI AAYOG (Approved Copy of Qrs / Specification uploaded in Gem portal) Specification: Microcontrollers & Boards:Arduino Uno/Nano/Mega (or equivalents).Raspberry Pi 3 Model B+.ESP32, Node MCU.Prototyping Tools:Solderless breadboards (400 and 800 pins).Self-adhesive proto shield and FR2 A-grade materials.Hook-up wires, jumper cables (M-M, M-F, F-F), and alligator connectors.Sensors & Modules:Wide range of sensors: Humidity, temperature, motion, gas (MQ series), IR, ultrasonic, PIR, and more.RFID Reader, Bluetooth, GSM, GPS, and Wi-Fi modules.Capacitive touch, soil moisture, rain, and color recognition sensors.Displays & Actuators:16x2 LCD display with I2C interface. LED matrices, RGB LEDs, and various single-color LEDs.Motors: DC, stepper, servo, vibrating, and BO motor with driver modules.Miscellaneous Components: Resistor and capacitor kits, diodes, transistors, and ICs (LM555).Relays, motor drivers, and piezoelectric plates.Robotics, drone, and application-specific DIY kitsPower & Connectivity:USB cables, battery packs, power banks, and clips. 1 YES 19 Package No. 2 Atal Tinkering Lab – Rapid Prototyping Tools The Package should include all items As per QR/specification for Package No.2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG Specifications: 3D Printer Kit and tools Dedicated UPS/Power back up Filament for 3D printer Filament Storage Box Set of Arts & Crafts Accessories – e.g.- stationary items and basic prototyping materials 1 YES 20 Package No. 3 Atal Tinkering Lab – Mechanical, Electrical and Measurement Tools The package should include all items As per QR/specification for Package No.3 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI 1 YES 36 AAYOG Specification: Cutting Tools: Hacksaw frame with blades (standard & mini).File set, mini file set, and flexible cutting mat. Hand Tools: Pliers (4.5-inch), tweezers, ball pein hammer, claw hammer, C-clamp, spanner set, Allen key set, wrench, and wire strippers. Drilling Tools: Drill machine set with workstation.Drill bit set and vice (normal). Screwdrivers & Soldering Tools: Precision screwdriver set, electric screwdriver set, soldering kit, and soldering helping hand. Measuring & Testing Tools: Digital multi meter, digital Vernier caliper, spirit level, measuring tape, and pen electric tester. Digital oscilloscope, adapters, telescope, DIY paper microscope Power Tools: Cordless rotary multi tool, dual-temperature heat gun, air blower, and hot glue gun.Organization & Workspace: Plastic trays, pegboard, and return measuring tools 21 Intel Core i5 - 1245U Mid Level Laptop - Notebook Specification: Laptop Type: Mid LevelIntel Core i5 - 1245UOperating System (Factory PreLoaded)Window 11 HomeRAM Size (GB)16Display Size (in cm) – Diagonal: 35.56 to 38.09 (14 In to 14.99 In)Capacity of Storage Drive (in GB)512 1 YES 22 65 Inch Display Interactive Panel with CPU Size (Diagonal): 65 or higher Panel Technology: IPS / VA Resolution: (Minimum) 4K (3840 x 2160) Viewing Angle (Hx V): 178*178RAM: 4 GB or higher On-board memory: 32 GB or higher Input (Minimum): 3 x HDMI, 4 x USB (Out of, which min 2xUSB3.0),1 xAudio, 1 x OPS slot, 1 x USB Type C Port Output: (Minimum) 1 x HDMI, 1 x Audio The software enables teachers to generate presentations using Al in PPT or PDF format. The teachers can select their Class, Subject, Topic and language to generate the presentations. The software supports all Indian and Global languages including English, Hindi, Marathi, Kannada, Tamil, Telugu, Gujarati, etc. Using Al, the software is able to analyse the Class and Subject and generate output accordingly. Using the Ask Me Anything tool, the teachers can search queries related to any topic and the Al is able to generate Class-wise and Subject-wise results including Images, Videos (YouTube Videos) and Explanation. Connected Classroom Software has in-built Generative Al capability to search and import filtered content relevant to Class and Subject. - images, videos, explanation for queries given by teachers in all languages. Teachers are able to import images and videos for teaching in class. The software has a text-to-speech function (for all languages) to convert text-based explanation into speech and read out loud in class. Software has Two-Way Live Conferencing Feature with education specific features Live conferencing feature also enables recording which gets directly uploaded to cloud.. Reports: Detailed reports for Attendance, Assessments, Study Material, are available for administrators to access. Administrators should be able to access to view the whiteboard saved by the teachers and monitor the usage.. Below tools and simulations are provided for enhancing the teaching-learning experience: - Graph: Demonstrating equations using 2D and 3D visualizations - Calculator: Standard and scientific - PHET simulation library with 100+ simulations across Maths, Physics, Chemistry, Biology. 1 YES 23 2 kVA OFF LINE UPS Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete 1 YES 24 Battery 75/80 AH capacity Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 1 YES 25 6Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 NO 37 26 8 Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 NO 27 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire with switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 1 NO 28 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire without switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box 1 NO 29 1.5 mm2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1 NO 30 Fans : 48 Sweep (1200 mm) Regular model Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 1 NO 31 LED Down Light 15-18W Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 1 NO 32 Fall Ceiling for Innovation lab to cover entire Area Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. 1 NO 33 Floor Mat for Innovation lab to Cover the entire Lab Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, labour, complete as per specifications 1 NO 34 Repair and Replacement of Windows and Doors (if required) Repairing door and window frames with available wood to the required size. 1 NO 35 Painting Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² 1 NO 38 with paint of approved quality to give an even shade, after thoroughly rooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-ccharge. (The gloss should be 50% @ 60 degree angle with 10 years life) 36 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry complete.(P No.59, SI.No 9.1 PWD SR 2023-24 Volume 2) 1 NO 37 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.( SI.No 8.33.1 PWD SR 2023-24 Volume 2) 1 NO 38 Polyurethane based ingle Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2 , having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2 , and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification (P No.A-149, SI.No 15.2 PWD SR 2023-24 Volume 1) 1 NO 39 Model Table - Modular Table with MDF Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface not to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 1 NO 40 Student Table - Modular Table with Particle Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to 1 NO 39 be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface not to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 41 Trainer Table - Executive Table with Pedestal, 3 Side Storage Unit 1 NO 42 Student Chair – Providing and supplying Unbranded wood chair/stool, already assembled Technical Specifcation Chair feature painting. Color-Other, Style Traditional. Furniture Assembly Already Assembled. Material Wood. Additional Parameters Additional Features good quality wooden arm chairs. 1 NO 43 Trainer Chair - Revolving Chair with Synchronic tilt mechanism 1 NO 44 Training of Teachers The Master Trainer will conduct a 2-day Training of Trainers (ToT) program for educators on effectively utilizing the Innovation Lab . The training should cover hands-on learning methodologies, STEM education, and practical applications of lab tools and technologies (P No.A-48, SI.No 1 PWD SR 2023-24 Volume 1) 1 NO 45 Technical Support 1 NO Schedule II Paystem, and the model should include an ESP8266, OLED display, ultrasonic sensor, and servo motor to detect and display nearby objects. The ultrasonic sensor, mounted on the servo motor, should continuously rotate from 0 to 180 degrees, scanning the surroundings for obstacles. As objects are detected, the system should display a dotted pattern on the OLED screen, similar to a submarine radar interface, providing a real-time visual representation of object proximity and location. The design must feature a durable plastic body for reliability, simulating sonar navigation and offering a dynamic way to monitor nearby obstacles through the rotating ultrasonic sensor and radar-like display. Its robust design ensures optimal performance in various environments, making it an excellent tool for obstacle detection and navigation. •Microcontroller: ESP8266 for processing and wireless capabilityDisplay: OLED screen with radar-like visual representationSensor: Ultrasonic sensor for object detectionActuator: Servo motor for 0°-180° scanning motionDetection Mechanism: Real-time scanning and obstacle mappingBody: Durable plastic for reliabilityOne pair of PCB and Mechanical
Contract Date: Ref. Documents Contract Value : ₹ 53.88 Lakh
Government Departments No of Bidders 1
Karnataka View Result →
49.
Housing Urban and Rular Development #8768080 AOC
Providing, Supplying, Commissioning Of Innovation Lab Equipments For Ghps & Ghs Sindhavala Village In Ballari Taluk, Under 2515 Kkrdb Cmdq For The Year 2024-25. - Misc.,Gst18%-1 Six Axis Robotic ARM Consists of •Axis – 6 axis•64- bit ARM Cortex Processor8GB RAM64 GB Storage CapacityServo Motors with 9.6 Kg/cm Torque Payload – 200gReach – 200 mmUSB Support port Should have 8 MP Camera User can add various objects for detection Should identify pre trained Objects Should perform pick and place operation Dimension in mm(D x H): 1100 x 600 One pair of PCB and Mechanical casing should be provided 2 Petro robot it should consists of Should have 8 MP Camera 64 bit ARM Cortex Processor 2-D Lidar Sensor Person RecognitionObject Recognition Should consists of 4 leg armShould perform forward and reverse motion Should have rechargeable battery Should have 12 V rechargeable BatteryPower Adapter for Battery Recharge •Dimension in cm (L x W x H): 62 x 20 x 45•One pair of PCB and Mechanical casing should be provided •Tasks performed: 1. Walking2. Running3. Pushups4. Dance5. Jumping6. Sit and Stand positions7. Lane following 3 Line Following robo car it should consists of A Robotic car with 4 wheelsShould have 2 IR sensors Should have 4 DC motors Atmega 328P Microcontroller L298 Motor Driver for Direction and Speed control Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5 Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: Straight Weight: 250gm•One pair of PCB and Mechanical casing should be provided 4 Obstacle avoidance robo car it shouldconsists of Robotic Car with 4 Wheels Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8 Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 5 Voice controlled Robo Car it should consists of Robotic Car with 4 Wheels DC motors with drivesBluetooth controller• Should perform motions by voice command Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22 mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg- Cm): 0.8Gearbox Shape: Straight Weight: 250gm •One pair of PCB and Mechanical casing should be provided RC Tank Robot RC Tank Chassis Kit – 01ESP32 controllerLED Switch4 DC motors with Drive Battery 4 DC motors with drive ESP32 controllerDimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided AI Humanoid Robot The AI Humanoid robot can realize human body induction in different directions, can perform facial recognition, supports voice interaction, and can realize the function of guiding navigation and explaining. Should have obstacle avoidance algorithm, perceive the real-time changes in the surrounding environment, bypass the obstacles in the planned path, and choose the appropriate route Go forward and finally reach the target point. The robot should have a touchable high-definition display screen, which should display, video playback, product information query, map display and other functions. The robot should have an open SDK package and an open API, which can be used for development according to the application scenario, adding exclusive personality functions, and more in line with the actual application scenario. Technical specifications include a user-friendly interface, robust security measures, seamless integration, efficient performance, and scalability. Specification: Processor: Intel i5 8th Gen Motors: DC motors for smooth and precise movement.Microphone: High-sensitivity microphone for voice recognition and interaction.Speakers: High-quality speakers for audio output and ntertainment. Display: LCD display for user interaction, information visualization. Dimension in cm(L x W x H): 50 x 54 x 100 IoT Pack IoT Based Smart Agriculture Smart Agriculture model should include an Raspberry Pi, a 10 inch LCD display, soil moisture sensor, water pump, and relay to automate irrigation for plants. The soil moisture sensor should continuously monitor the moisture levels in the soil. When the soil is wet, the relay should remain off, preventing the pump from operating. However, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. The LCD display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. Constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart technology in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. Microcontroller: Raspberry piSoil Moisture Sensor – Measures soil humidity levels.DHT11/DHT22 Sensor – Monitors temperature and humidity.pH Sensor – Checks soil acidity or alkalinity.LDR (Light Sensor) – Detects sunlight intensity.Rain Sensor – Detects rainfall for irrigation control.Ultrasonic Sensor – Monitors water level in tanks.Water Pump – Automated irrigation control via relay.Servo Motor – Adjusts solar panel orientation.Relay Module (5V) – Controls high-power devices.IoT Connectivity – Data transmission via WiFi/Bluetooth.Cloud Storage – Stores real-time sensor data online.Web App – Displays real-time farm conditions.Power Adapter – Powers all connected components. IoT Based Home Automation The Home Automation System model should include a Raspberry Pi, MQ-2 gas sensor, buzzer, ultrasonic sensor, servo motor, 7-inch display, DHT11 temperature sensor, and two relays to enhance home convenience and safety. The ultrasonic sensor should detect approaching objects, triggering the servo motor to automatically open the door, while the 7-inch display presents real-time temperature readings. In one room, an IR sensor should detect motion, activating the relay to turn on an LED and a fan. Additionally, when the MQ-2 sensor detects smoke in the kitchen, the buzzer should sound an alert until the smoke dissipates. The system must feature a durable plastic body for reliability and easy assembly, showcasing the seamless integration of smart technologies to create a safer and more efficient living environment, ensuring enhanced convenience and security. Microcontroller: Raspberry Pi for central control with WiFi and Bluetooth Ram: 4GB64 bit ARM Cortex ControllerGas Detection: MQ-2 sensor to detect smoke and gas leaksAlert System: Buzzer sounds when smoke is detected• Object Detection: Ultrasonic sensor detects approaching objects for automatic door controlDoor Mechanism: Servo motor opens the door upon object detection• Display: 7-inch screen for real-time temperature and system statusTemperature Monitoring: DHT11 sensor measures room temperature and humidityMotion Detection: IR sensor detects movement in the room Relay Module (x2): Controls LED and fan activationLighting & Ventilation: LED and fan turn on when motion is detectedBody: Durable plastic for reliability and easy assembly 8.3 Smart Watch health parameter monitoring kit Smart Watch is an innovative wearable device project, and the model should include an ESP processor, OLED display, and four push buttons to provide a range of functionalities. The watch must feature a custom-designed PCB for compactness and efficiency, along with a durable watch belt for comfortable wear. One push button should be dedicated to displaying the current time, date, and day, while another button should provide weather information, enhancing convenience for users. The remaining two buttons should be integrated for the IoT interface, allowing interaction with various smart devices and applications. This project demonstrates the potential of combining advanced technology with practical design, creating a multifunctional smartwatch that caters to modern lifestyle needs, ensuring reliability and user-friendly operation. ESP Processor – Core controller for smartwatch operations. OLED Display – Displays time, date, weather, and IoT interactions. Four Push Buttons – Dedicated for time, date, weather, and IoT control. Custom-Designed PCB – Ensures compactness and efficiency. Durable Watch Belt – Provides comfort for daily wear. Time, Date, and Day Display – Activated by a dedicated button. Weather Information Display – Accessed via a separate button. IoT Integration – Controls and interacts with smart devices. Energy-Efficient Design – Optimized for long battery life. Modern & User-Friendly – Enhances convenience and usability. 8.4 IoT Based Smart Cam Vision Snap should consist of an advanced security system that includes facial recognition for identifying individuals, enhancing security in restricted areas. Key components include a Raspberry Pi, a camera, and a display for real-time monitoring. This system features motion detection, which triggers alerts for unauthorized movement, significantly improving surveillance capabilities. It provides real-time alerts, enabling immediate responses to potential threats, while secure connectivity ensures the protection of sensitive data. Together, these features create a robust security solution for various applications, making Vision Snap an effective tool for safeguarding premises and enhancing overall security measures. Raspberry Pi – Central processing unit for AI-based security.Camera Module – Captures real-time footage and facial recognition.Display Screen – Shows live monitoring and alerts.Facial Recognition – Identifies individuals for security access.Motion Detection – Detects unauthorized movement and triggers alerts.• Real-Time Alerts – Sends notifications for immediate response.Secure Connectivity – Protects sensitive surveillance data.AI-Powered Surveillance – Enhances monitoring efficiency.Remote Access – Allows monitoring from any location.Robust Security System – Ideal for restricted areas and premises. Immersive Technology Pack VR Headset Kit Should Consist of Following Line Item VR Head Set Storage: 512GBDisplay: Each eye experiences a resolution of 2064 x 2208 pixels, delivering sharp and immersive visuals.Processor: Powered by the Snapdragon XR2 Gen 2 chipset, providing enhanced performance for demanding VR applications.Refresh Rate: Supports a 120Hz refresh rate, ensuring smooth and responsive gameplay.Memory: Equipped with 8GB of RAM to handle multitasking and complex VR environments.Mixed Reality Capabilities: Features full-color passthrough, allowing users to blend virtual and real-world elements seamlessly.Design: Utilizes pancake optics to reduce the headsets size, offering a more comfortable fit for extended use. 32-inch or more smart LED TV to Stream a VR applications Resolution: HD (720p)Smart Platform: Google TVFeatures: Google Play, Google Cast Built-in, HDR10, Dolby Audio, Voice Remote, Live TV Streaming AA Batteries – 10 Voltage: 3.7V (Lithium-Ion)Capacity: 1800–3500 mAhChemistry Types: Alkaline, NiMH (Rechargeable), Lithium, Zinc-CarbonSize: Diameter ~14.5mm, Length ~50.5mmWeight: ~23g to 30g 6DoF AR-VR Educational Controller can be used as and augmented reality (AR) device. Hold virtual heart, lungs, dinosaurs, plants and so much more in your hand to get an engaging learning experience. AR provides students with opportunities to deepen their knowledge within several areas, including:ScienceWorking with numbersSpatial concepts Content creationReal-life environments & scenarios Samsung Galaxy M15 5G or ARCore supported Devices Display: 6.5-inch Super AMOLED, 1080 x 2340 pixelsProcessor: MediaTek Dimensity 6100+, Octa-coreRAM & Storage: 4GB/6GB/8GB RAM, 28GB/256GB storage (expandable up to 1TB)Rear Cameras: 50MP (wide) + 5MP (ultra-wide) + 2MP (macro)Front Camera: 13MPBattery: 6,000mAh, 25W fast charging OS: Android 14 with One UI 6Security: Side-mounted fingerprint sensor Connectivity: 5G, NFC supportDimensions: 160.1 x 76.8 x 9.3mm, Weight : 217g VR Application Content for experintial learning a) VR chemistry lab, b) VR human anatomy, c) VR tour guide, d) VR English Learning App, e) VR space exploration app, f) VR electrical simulator app, g) VR Based Lathe Machine app, h) VR Based SMD Soldering & De soldering app Drone Kit Should Consist of Following Line Item. Drone Kit with Wi-Fi and Camera is an ideal project for enthusiasts looking to build a custom drone from the ground up. This kit typically includes essential components such as a frame, brushless motors (BLDC), electronic speed controllers (ESCs), a flight controller board (FCB), and a Wi-Fi-enabled camera for real-time video transmission. It offers the flexibility of adding a LiPo battery for power, a remote controller, and propellers for flight stability. With built-in Wi- Fi, users can easily control and monitor the drone using a mobile app or computer, while the camera provides aerial photography and video streaming capabilities. 1 x F450 Frame 4 x 1000kv BLDC Motor 4 x ESC Motor 1 x 2-3 Cell Battery Charger1 x 2200 mAh Lipo Battery1 x Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver1 x APM 2.8 Flight Controller (Without Compass) Mini Makers Pack Thermo Sage Thermo Sage is a touch-free temperature monitoring system, and the model should include an ESP8266, OLED display, infrared temperature sensor, ultrasonic sensor, two LEDs, and a buzzer for efficient health monitoring. When the ultrasonic sensor detects a person within 10 cm, the infrared sensor measures their body temperature, displaying the result on the OLED screen. If the temperature is normal, the green LED lights up as an indication. However, if the temperature exceeds the normal range, the red LED activates, and the buzzer sounds an alert. The design must feature a durable plastic body for reliable performance, offering a safe, contactless solution for monitoring body temperature, ideal for public health and safety applications. Microcontroller: ESP8266 for wireless connectivityDisplay: OLED screen for temperature readingsTemperature Sensor: Infrared sensor for touch-free measurementDistance Sensor: Ultrasonic sensor to detect person within 10 cm• LED Indicators: Green LED for normal temperature, red LED for high temperatureBuzzer: Alerts when temperature is above normal range• Body: Durable plastic for reliable performanceOne pair of PCB and Mechanical Design will be provided Sun Quest Sun Quest model should include an Arduino Nano, two LDR modules, a servomotor, a solar panel, and two LEDs to maximize energy efficiency. The LDR modules detect light intensity, enabling the system to track the sun’s position. When one LDR senses higher light intensity, the servo motor should rotate the solar panel toward that direction to optimize energy capture. The LEDs connected to the solar panel will demonstrate real-time power generation, lighting up to show how current is produced as the panel adjusts. The design must feature a durable plastic body for longevity, enhancing solar energy efficiency by dynamically following the sun’s path throughout the day. Microcontroller: Arduino Nano for system controlLight Sensors: Two LDR modules for detecting light intensityActuator: Servo motor for rotating the solar panelSolar Panel: Generates and demonstrates power outputLED Indicators: Show real-time power generationBody: Durable plastic for longevity One pair of PCB and Mechanical Design will be provided LightScape Lightscape model should include an Arduino Nano, LDR module, IR sensor, and 6 LEDs to optimize energy usage based on environmental conditions. When the LDR detects darkness (indicating nighttime), the system should activate, keeping 3 LEDs ON for basic lighting. When the IR sensor detects movement, all 6 LEDs should turn ON for 5 seconds to enhance visibility for pedestrians or vehicles, then return to 3 LEDs ON. During daylight, when the LDR senses light, the LEDs should remain OFF to conserve energy. The design must feature a durable plastic body for reliability, providing efficient, adaptive street lighting that responds to both time of day and movement, significantly improving energy conservation and safety on the streets. Microcontroller: Arduino Nano for system automationSensors: LDR for detecting light levels, IR sensor for motion detectionLEDs: 6 LEDs for adaptive street lightingLighting Control: 3 LEDs ON at night, all 6 ON when motion is detected for 5 secondsEnergy Conservation: LEDs OFF during daylight Body: Durable plastic for reliabilityOne pair of PCB and Mechanical Design will be provided Navwave NavWave is a sonar-inspired object detection system, and the model should include an ESP8266, OLED display, ultrasonic sensor, and servo motor to detect and display nearby objects. The ultrasonic sensor, mounted on the servo motor, should continuously rotate from 0 to 180 degrees, scanning the surroundings for obstacles. As objects are detected, the system should display a dotted pattern on the OLED screen, similar to a submarine radar interface, providing a real-time visual representation of object proximity and location. The design must feature a durable plastic body for reliability, simulating sonar navigation and offering a dynamic way to monitor nearby obstacles through the rotating ultrasonic sensor and radar-like display. Its robust design ensures optimal performance in various environments, making it an excellent tool for obstacle detection and navigation. •Microcontroller: ESP8266 for processing and wireless capabilityDisplay: OLED screen with radar-like visual representationSensor: Ultrasonic sensor for object detectionActuator: Servo motor for 0°-180° scanning motionDetection Mechanism: Real-time scanning and obstacle mappingBody: Durable plastic for reliabilityOne pair of PCB and MechanicalDesign will be provided Electronics & Hardware Kit Universal Electrical/Electronic breadboard plug and play training kit designed to perform the experiments from the basic to advance level of electrical and electronics exercises, This kit is made easy to conduct experiments by plugging in the components in to the specifically designed breadboard. Should have built-in Function generator, power supply and required meters List of components Resistors SetPotentiometers Non-linear resistors VDR-, LDR-, NTC-, PTC resistors Capacitors SetTransformer 1 Experiential Skilling Lab set Electrical Booth Spec - 01 Each workstation should have dimensions of 4 ft width and 6 ft height. The material used for the workstations construction must be high-quality plywood with a thickness of at least 10mm, ensuring durability and stability. The workstation should be designed in a plus-shaped configuration, where each arm of the plus symbol represents an individual training domain. The work station should have 4 station where, Electrical installation, Plumbing and CCTV installation can be practiced All necessaries aids for this training should be provided in this work station 1 CCTV Installation kit To provide a comprehensive training setup for students to learn and practice the installation, configuration, and maintenance of CCTV systems, including cabling, DVR setup, and network integration for monitoring and recording. Dome Cameras –1 NoBullet Camera-1 NoDVR/NVR Unit -1 No Cables and AccessoriesPower Supply with adaptorsSwitch and RouterDisplay and MonitoringNetworking Tools 1 Domestic Electric Wiring Kit To provide a comprehensive training setup for students to learn and practice the installation, wiring, and maintenance of domestic Electric wiring methods, includes reading and understanding electrical drawings, Switch gears and colour coding of cables. Domestic electric wiring kit – 1 set MCB, 4P, 25ADistribution Box 3 tier 36 modules RCCB 2P 40A 30mA ACtype• MCB xC60 1P 2A C 10000A6A 1-WAY SWITCH 6A 2-way Switch• 6A/16A 3-Pin Socket Outlet PVC Casing-Capping, 50mmPVC Casing- Capping, 25mmPVC Conduit, High density, 19mmSaddles, 19 mmPOP screwPVC Junction Box 19mm, 1 wayPVC Junction Box 19mm, 2 wayPVC Junction Box 19mm, 3 wayPVC Junction Box 19mm, 4 wayBatten Holder2- Module Box with surface plate, PVC4-Module Box, PVC8-Module Box, PVCTools – 1 set 12V Cordless Drill machinePhilip bit Spirit Level, 30 cm Steel Rule, 30 Cm Wire Stripper Heavy duty cable cutter Try square Measurement tape Mini Hack Saw frame with blades Hack Saw Frame with blades Crimping tool, tube type lugs File Set Electrician knifeAllen key set Hole saw, 22 mm Screw Driver set Nose plier Drill Bit Set Mini screw driver set Aluminum Stair Case, 3 step 1 Plumbing Installation Setup To equip a plumbing training lab with all necessary tools and equipment to provide students with hands-on experience in basic and advanced plumbing techniques, including pipe fitting, jointing, fixture installation, and system testing. Tools for Pipe Cutting and ShapingPipe Cutter:Hacksaw:Pipe Bender:PVC Pipe Cutting Scissors:Tools for Threading and JoiningPipe Threaded Set: Teflon Tape Dispenser:Plumbers Soldering Kit:Adhesive Application Kit: Wrenches and SpannersAdjustable Pipe Wrench:Basin Wrench:Ring Spanner Set:Testing and Measurement ToolsWater Pressure Gauge: Flow Rate Meter:Leak Detection Kit: Spirit Level:Plumbing Fixtures for Installation PracticeSink and Basin Fixtures:Faucets and Taps:Shower Unit: Drainage System ComponentsP-traps and S-traps:Wastewater Pipes:Junction Boxes: 1 Smart Solar Renewable Energy Kit Solar Photovoltaic Training Kit for Lab experimentsPV Module Stand: 2nos. 1 SAM S-5 Missile Educational Training Kit Missile defense systems are essential for national security, airspace protection, and strategic deterrence. This will explore the working principles of the missile system, focusing on its launch mechanism, guidance technology, and interception capabilities. Additionally, it will analyze the applications of the model in air defense, including target tracking, threat neutralization, and military strategy. SAM S-5 Missile System should consist of the following items. Raspberry Pi x 1Camera Module x 1Lidar or Ultrasonic sensor x 1 Servo MotorsGyroscope x 1Shooter x 1Battery x 1 Battery Adapter x 1 GEO Satellite Communication Educational Training Kit Satellites play a crucial role in modern communication, navigation, weather forecasting, and scientific research. This will explore the communication and data transmission process in GEO satellites analyze the applications of GEO satellites in telecommunications, weather forecasting, and remote sensing. GEO Satellite Communication Kit should consist of the following items. Raspberry Pi x 3ESP8266 x 3ZigBee Module and adapter x 3 RF Module x 3 Temperature and Humidity Sensor x 2 Soil Moisture Sensor x 1 NPK Sensor x 1 Pressure Sensor x 2Co2 Sensor x 1• Camera Module x 1Buzzer x 3 LEDsRover Model x 1Base station Model x 1Battery Battery Adapter LUNAR PATH Explorer- Educational Rover BOT It should comes with Matt finished metal chassis. Included all sensor metal clamps, and high torque DC Johnson A grade motors. Compatible with Arduino, raspberry, etc. Easy to assemble. Assembly manual provided in the kit. All required components, sensors, and tools are provided in the kit. It should consists of following items: 12V DC 10 RPM MOTORS -2ULTRASONIC SENSORS - 3IR SENSORS - 5 WIDE TRACK WHEELS - 4WIDE TRACK BELTNUT BOLTSSPANNER TWO IN ONE SCREWDRIVER,JUMPER WIRESSG90 SERVO MOTOR -1 ON/OFF ROCKER SWITCH -2TOGGLE SWITCH - 2MOTOR WIRES Package No. 1 Atal Tinkering Lab The package should include all items As per QR/specification for Package No. 1 - Atal Tinkering Lab of NITI AAYOG Electronics Development, Robotics, Internet of Things and Sensors approved by NITI AAYOG (Approved Copy of Qrs / Specification uploaded in Gem portal) Specification: Microcontrollers & Boards:Arduino Uno/Nano/Mega (or equivalents).• Raspberry Pi 3 Model B+.ESP32, Node MCU.Prototyping Tools:Solderless breadboards (400 and 800 pins).Self-adhesive proto shield and FR2 A-grade materials.Hook-up wires, jumper cables (M-M, M-F, F-F), and alligator connectors.Sensors & Modules:Wide range of sensors: Humidity, temperature, motion, gas (MQ series), IR, ultrasonic, PIR, and more.RFID Reader, Bluetooth, GSM, GPS, and Wi-Fi modules.Capacitive touch, soil moisture, rain, and color recognition sensors.Displays & Actuators:16x2 LCD display with I2C interface. LED matrices, RGB LEDs, and various single-color LEDs.Motors: DC, stepper, servo, vibrating, and BO motor with driver modules.Miscellaneous Components: Resistor and capacitor kits, diodes, transistors, and ICs (LM555).Relays, motor drivers, and piezoelectric plates.Robotics, drone, and application-specific DIY kitsPower & Connectivity:USB cables, battery packs, power banks, and clips. Package No. 2 Atal Tinkering Lab – Rapid Prototyping Tools The Package should include all items As per QR/specification for Package No.2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG Specifications: 3D Printer Kit and tools Dedicated UPS/Power back up Filament for 3D printer Filament Storage Box Set of Arts & Crafts Accessories – e.g.- stationary items and basic prototyping materials Package No. 3 Atal Tinkering Lab – Mechanical, Electrical and Measurement Tools The package should include all items As per QR/specification for Package No.3 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG Specification: Cutting Tools: Hacksaw frame with blades (standard & mini).File set, mini file set, and flexible cutting mat. Hand Tools: Pliers (4.5-inch), tweezers, ball pein hammer, claw hammer, C-clamp, spanner set, Allen key set, wrench, and wire strippers. Drilling Tools: Drill machine set with workstation.Drill bit set and vice (normal). Screwdrivers & Soldering Tools: Precision screwdriver set, electric screwdriver set, soldering kit, and soldering helping hand. Measuring & Testing Tools: Digital multi meter, digital Vernier caliper, spirit level, measuring tape, and pen electric tester. Digital oscilloscope, adapters, telescope, DIY paper microscope Power Tools: Cordless rotary multi tool, dual-temperature heat gun, air blower, and hot glue gun.Organization & Workspace: Plastic trays, pegboard, and return measuring tools Intel Core i5 - 1245U Mid Level Laptop - Notebook Specification: Laptop Type: Mid LevelIntel Core i5 - 1245UOperating System (Factory Pre- Loaded)Window 11 HomeRAM Size (GB)16Display Size (in cm) – Diagonal: 35.56 to 38.09 (14 In to 14.99 In)Capacity of Storage Drive (in GB)512 65 Inch Display Interactive Panel with CPU Size (Diagonal): 65 or higher Panel Technology: IPS / VA Resolution: (Minimum) 4K (3840 x 2160) Viewing Angle (Hx V): 178*178RAM: 4 GB or higher On-board memory: 32 GB or higher Input (Minimum): 3 x HDMI, 4 x USB (Out of, which min 2xUSB3.0),1 xAudio, 1 x OPS slot, 1 x USB Type C Port Output: (Minimum) 1 x HDMI, 1 x Audio The software enables teachers to generate presentations using Al in PPT or PDF format. The teachers can select their Class, Subject, Topic and language to generate the presentations. The software supports all Indian and Global languages including English, Hindi, Marathi, Kannada, Tamil, Telugu, Gujarati, etc. Using Al, the software is able to analyse the Class and Subject and generate output accordingly. Using the Ask Me Anything tool, the teachers can search queries related to any topic and the Al is able to generate Class-wise and Subject-wise results including Images, Videos (YouTube Videos) and Explanation. Connected Classroom Software has in-built Generative Al capability to search and import filtered content relevant to Class and Subject. - images, videos, explanation for queries given by teachers in all languages. Teachers are able to import images and videos for teaching in class. The software has a text-to-speech function (for all languages) to convert text-based explanation into speech and read out loud in class. Software has Two-Way Live Conferencing Feature with education specific features Live conferencing feature also enables recording which gets directly uploaded to cloud.. Reports: Detailed reports for Attendance, Assessments, Study Material, are available for administrators to access. Administrators should be able to access to view the whiteboard saved by the teachers and monitor the usage.. Below tools and simulations are provided for enhancing the teaching-learning experience: - Graph: Demonstrating equations using 2D and 3D visualizations - Calculator: Standard and scientific - PHET simulation library with 100+ simulations across Maths, Physics, Chemistry, Biology. 2 kVA OFF LINE UPS Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete Battery 75/80 AH capacity Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 6Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 26 8 Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 27 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire with switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 28 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire without switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box 29 1.5 mm2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 30 Fans : 48 Sweep (1200 mm) Regular model Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 31 LED Down Light 15-18W Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 32 Fall Ceiling for Innovation lab to cover entire Area Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. 33 Floor Mat for Innovation lab to Cover the entire Lab Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, labour, complete as per specifications 34 Repair and Replacement of Windows and Doors (if required) Repairing door and window frames with available wood to the required size. 35 Painting Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry complete.(P No.59, SI.No 9.1 PWD SR 2023-24 Volume 2) Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.( SI.No 8.33.1 PWD SR 2023-24 Volume 2) Polyurethane based ingle Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2 , having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2 , and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification (P No.A-149, SI.No 15.2 PWD SR 2023-24 Volume 1) Model Table - Modular Table with MDF Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface not to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). Student Table - Modular Table with Particle Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface not to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus mm). Trainer Table - Executive Table with Pedestal, 3 Side Storage Unit Student Chair – Providing and supplying Unbranded wood chair/stool, already assembled Technical Specifcation Chair feature painting. Color-Other, Style Traditional. Furniture Assembly Already Assembled. Material Wood. Additional Parameters Additional Features good quality wooden arm chairs. Trainer Chair - Revolving Chair with Synchronic tilt mechanism Training of Teachers The Master Trainer will conduct a 2-day Training of Trainers (ToT) program educators on effectively utilizing the Innovation Lab . The training should cover hands-on learning methodologies, STEM education, and practical applications lab tools and technologies (P No.A-48, SI.No 1 PWD SR 2023-24 Volume 1) Technical Support
Contract Date: Ref. Documents Contract Value : ₹ 53.88 Lakh
Government Departments No of Bidders 1
Karnataka View Result →
50.
Rural Development #8642304 AOC
Providing Rates For Spv System Zp Bhandara- 1 Providing , Installation And Commissioning And Testing Solar Pump 2 Providing , Installing And Giving Test Of 0.5 Hp Spv Submersible Pump ( Dc ) Of Borewell ( 900 Watt Per Hp ) With All Necessary Attachments & ( 450 Watt Per Hp Pv Module ) As Peras Per Mnre Letter No 318 / 38 / 2018-Gcrtdtd 25 / 06 / 2020Asmotor Pumpset -0.5Hp, 450 W Submersible Pumpsetbrushless Dc Pump ( B.L.D.C. ) Dc Volt 90-300 V, Ac Volt 90-240 V, Inbuilt Controller 3 Providing , Installing And Giving Test Of 1.0 Hp Spv Submersible Pump ( Dc ) Of Borewell ( 900 Watt Per Hp ) With All Necessary Attachments & ( 900 Watt Per Hp Pv Module ) Asas Permnre Letter No 32 / 24 / 2020-Spv Division Dtd 18 / 08 / 2021 Motor Pumpset -1.0Hp, 900 W Submersible Pumpsetbrushless Dc Pump ( B.L.D.C. ) Dc Volt 90-300 V, Ac Volt 90-240 V, Inbuilt Controller 4 Providing , Installing And Giving Test Of 2.0 Hp Spv Submersible Pump ( Dc / Ac ) Of Borewell ( 900 Watt Per Hp ) With All Necessary Attachments & ( 900 Watt Per Hp Pv Module ) As Permnre Letter No 32 / 24 / 2020-Spv Division Dtd 18 / 08 / 2021As Per Motor Pumpset - 2.0Hp, 900 W Submersible Pumpsetbrushless Dc Pump ( B.L.D.C. ) Dc Volt 90-300 V, Ac Volt 90-240 V, Inbuilt Controller 5 Providing , Installing And Giving Test Of 3.0 Hp Spv Submersible Pump ( Dc / Ac ) Of Borewell ( 900 Watt Per Hp ) With All Necessary Attachments & ( 900 Watt Per Hp Pv Module ) As Permnre Letter No 32 / 24 / 2020-Spv Division Dtd 18 / 08 / 2021 As Permnre Technical Specification Annexure I And Ii 6 Providing , Installing And Giving Test Of 5.0 Hp Spv Submersible Pump ( Dc / Ac ) Of Borewell ( 900 Watt Per Hp ) With All Necessary Attachments & ( 900 Watt Per Hp Pv Module ) As Permnre Letter No 32 / 24 / 2020-Spv Division Dtd 18 / 08 / 2021As Permnre Technical Specification Annexure I And Ii . 7 Providing , Installing And Giving Test Of 7. 5 Hp Spv Submersible Pump ( Dc / Ac ) Of Borewell ( 900 Watt Per Hp ) With All Necessary Attachments & ( 900 Watt Per Hp Pv Module ) As Permnre Letter No 32 / 24 / 2020-Spv Division Dtd 18 / 08 / 2021 As Permnre Technical Specification Annexure I And Ii . 8 Providing , Installing And Giving Test Of 10.00 Hp Spv Submersible Pump ( Dc / Ac ) Of Borewell ( 900 Watt Per Hp ) With All Necessary Attachments & ( 900 Watt Per Hp Pv Module ) As Permnre Letter No 32 / 24 / 2020-Spv Division Dtd 18 / 08 / 2021As Permnre Technical Specification Annexure I And Ii . 9 A ) Installation And Ccommissioning Of 1.0 Hp Solar Pump Submersible Pumpsetbrushless Dc Pump With Inbuilt Controller ( B.L.D.C. ) Dc Volt 30-300 V, Ac Volt 90-240 V, Maximam Shut Off Head - 120 Meter Discharge -10000 Lit Per Day For 90 Meter Dynamic Head. 10 A ) Installation And Ccommissioning Of 2.0 Hp Solar Pump Submersible Pumpsetbrushless Dc Pump With Inbuilt Controller ( B.L.D.C. ) Dc Volt 30-300 V, Ac Volt 90-240 V, Maximam Shut Off Head - 120 Meter Discharge -15000 Lit Per Day For 90 Meter Dynamic Head. 11 A ) Installation And Ccommissioning Of 3.0 Hp Solar Pump Submersible Pumpsetbrushless Dc Pump With Inbuilt Controller ( B.L.D.C. ) Dc Volt 100-300 V, Ac Volt 90-240 V, Maximam Shut Off Head - 130 Meter Discharge -28000 Lit Per Day For 105 Meter Dynamic Head. 12 Hybrid Controllerfor 3.0 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 13 Hybrid Controllerfor 5.0 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 14 Hybrid Controllerfor7.50 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 15 Hybrid Controllerfor 10.0 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 16 Hybrid Controllerfor 12.50 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 17 Hybrid Controllerfor 15.00 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 18 Hybrid Controllerfor 20.00 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 19 Hybrid Controllerfor 25.00 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 20 Hybrid Controllerfor 30.00 Hp Auto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Availableauto Switching Between Grid And Solar Pump Can Be Operated On Both Solar And Grid, Solar Is Given First Preference. In Case Solar Power Generation Is Not Sufficient To Run Pump, Then Pump Operation Will Switch To Grid Unit Till Solar Power Is Available With 5 Year Cmc 21 Gps System Auto Start / Stop / Capability With Remote Tank Full Sensing And Control This Will Include:-Sensors Data Transmission To Server- Control Command To The Solar Water Pump.Controller Based Upon Tank Is Full Or Not.- Power Supply To The Data Collection / Transmission Unit.This Power Supply Needs To Be Batterybacked ( With Lithium Ferrous Phosphate Battery ) -Charge Controller For Battery Charging-12Wp Solar Panel5 Years Cmc And Maintenance 22 Supply Of Special Water Chamber S Per Gsda Year 2022-23 23 Supply Of Ss Nipple ( As Pergsda Year 2022-23 Approved 24 Supplying And Erecting Isi Mark Of Hdpe Pipe 32Mm Dia. Suitable For Pressure Of 6 Kg / Cm2 Connected To Submersible Cable ( Pwd Electrical Csr 2023-24 I 25 Supplying And Erecting Isi Mark Of Hdpe Pipe 50 Mm Dia. Suitable For Pressure Of 6 Kg / Cm2 Connected To Submersible Cable ( Pwd Electrical Csr 2023-24 I 26 Supply And Erecting Flat Flexible Submersible Cable With Copper Conductor Pvc Insulated And Pvc Sheathed3 Core 2.5 Sq. Mm As Per Is -694 Marked As Per _Pwd Electrical Dsr 2023-24 Item No Cb-12-4.-8Page. No.219 27 Supply And Erecting Flat Flexible Submersible Cable With Copper Conductor Pvc Insulated And Pvc Sheathed3 Core 4 Sq. Mm As Per Is -694 Marked As Per _Pwd Electrical Dsr 2021 Item No Cb-12-4.-8Page. No.219 28 Supply And Erecting Flat Flexible Submersible Cable With Copper Conductor Pvc Insulated And Pvc Sheathed3 Core 6 Sq. Mm As Per Is -694 Marked As Per _Pwd Electrical Dsr 2021 Item No Cb-12-4.-8Page. No.219 29 Extension Of Casing Pipe Is 1239 For Hand Pump Pedastal Assembly As Per Gsda Year 2022-23 Approved Rate 30 Repairing Existing Platform As Per Zp Bhandara Drillinge-Tender Year2022-23 31 Yield Test Charges Of Borewell As Pergsda Year2022-23 32 Redrilling Or Flushing Borewell 33 Water Tanker For Bore Well Acceptance Test 34 Removal & Installation Of Hand Pumpsas Pergsda Year 2022-23 35 Excavation For Foundation In Earth Soil Of All Types Sand, Gravel & Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 Meter & Stacking, Spreading As Directed, Normal Dewatering The Bed For Foundation & Excluding Back Filling Etc. Complete ( Mjp Dsr 2022-23 Sect. E- Item No -1 Page No.27 ) 36 Excavation For Foundation In Earth Soil Of All Types Sand, Gravel & Hard Murum, Including Removing The Excavated Material Up To A Distance Of 50 Meter & Stacking, Spreading As Directed, Normal Dewatering The Bed For Foundation & Excluding Back Filling Etc. Com. ( Mjp Dsr 2022-23 Sect. E-Item No 2 Page No. 27 ) 37 Excavation For Foundation In Earth Soil Of All Types Sand, Gravel & Hard Murumwith Boulder Including Removing The Excavated Material Up To A Distance Of 50 Meter & Stacking, Spreading As Directed, Normal Dewatering The Bed For Foundation & Excluding Back Filling Etc. Com. ( Mjp Dsr 2022-23 Sect. E-Item No 3 Page No. 27 ) 38 For Foundation / Pipe Trenches In Hardrock And Concrete Road By Chieselling , Wedging , Line Drilling By Mechanical Means Or By All Means Other Than Blasting Including Trimming And Levelling The Bed , Removing The Excavated Material Upto Distance Of 50M Beyond The Area Of Lift As Below , Stacking As Directed By Engineer In Charge, Normal Dewatering, Excluding Backfilling, Etc Complete By All Means. ( Bd-A- 1 / 259 ) { Mjp Dsr2022-23 Section E Item No 07 Page No.43 39 Providing Dry Trap / Granite / Quartzite / Gneiss Rubble Stone Soling In 15 Cm To 20 Cm Thick Layers Including Hand Packing & Compacting, Etc. Compl. ( Mjp Dsr 2022-23 Sect. E-Item 18Page No. 30 ) 40 Supplying And Laying Of Stone Aggregate 10 Mm To 20 Mm Nominal Gauge In The Foundation / Base Including Watering And Ramming Stone Aggregate 10 Mm Mjp Ssr 2023-24 Section A Sr. No. 49 Page No. 13 41 Providing And Laying Castin Situ / Ready Mix Cement Concrete In M-10 Of Trap / Granite / Quartzite / Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steelcentering, Formwork, Laying / Pumping, Compacting, Roughening The Mif Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enable Dreversible Drum Type Mixer / Concrete Batch Mix Plant ( Panmixer ) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) Pwd Ssr 2022-23 Sr. No. 832 Page No. 215 42 Supplying And Laying Of Washed River Sand Including Carriage To Site, Loading And Unloading, Laying In Base And Top Of Pit, Watering And Ramming Consolidating And Dressing Complete.Fine Sand ( From River Sand At Site ) Mjp Ssr 2021-22 Section M Sr. No. 10 E Page No. 230 43 Geotextile 400 Gsm ( Grams Per Sqm Membrane ) 44 Supply And Installation Of Co-Polymer Based Rainwater Harvesting Structure Including Supply Of Crosswave Cw-Hyq Of Size 494 Mm X 494 Mm X 220 Mm With Minimum Void Ratio Of 94.7% Having A Weigth Of 1.8 Kg And Specers Having Size Of 988 Mm X 240 Mm X 25 Mm Having A Weight Of 0.8 Kg Of Approved Make Including Deboarding Og Structure Inside The Tank, Lowering It As Per Diamention Including Covering It With Spacer Etc. Complete In All Respect 45 Making Perforation To Casing Pipe 1 Mtr. Height From The Base Of Moduler Filter 46 6 Pvc Cap As Per Gsda Rate 47 Providing & Laying In Situ Followingm150 C.C.Of Trap / Granite / Gneiss Metal For Foundation & Bedding Including Dewatering , Form Work , Compacting & Curing Finishing Etc. Complete ( Mjp Dsr 2022-23 Sect. G -Item No 1B Page No. 48 48 Column- Providing & Casting In Situ C.C. Of Trap Granite / Quartzite / Gneiss Metal Of Approved Qualityfor Rcc Work As Per Detailed Drawing & Design Or As Directed By Engineering In Charge Including Normal Drawing, Centering, Form Work, Compaction Finishing The Formed Surfaces With Cm 1 : 3 Sufficient Minimum Thickness To Give A Smooth & Even Surface Wherever Necessary Or Roughening If Special Finish Is To Be Provided & Curing Etc. Complete. Rcc M 250 ( Mjp Dsr 2022-23 Sect. G Item No 3C Page No. 49 ) 49 Horizontal Beam - Providing & Casting In Situ C.C. Of Trap Granite / Quartzite / Gneiss Metal Of Approved Qualityfor Rcc Work As Per Detailed Drawing & Design Or As Directed By Engineering In Charge Including Normal Drawing, Centering, Form Work, Compaction Finishing The Formed Surfaces With Cm 1 : 3 Sufficient Minimum Thickness To Give A Smooth & Even Surface Wherever Necessary Or Roughening If Special Finish Is To Be Provided & Curing Etc. Complete. Rcc M 250 ( Mjp Dsr 2022-23 Sect. G Item No 4C Page No.49 ) 50 Providing & Fixing In Position Steel Bar Reinforcement Of Various Dia. For Rcc Work Like Foundation, Beams, Column Etc As Per Detailed Drawing Design Including Cutting, Bending, Hooking The Bars Binding With Wires Or Track Welding & Supporting As Required Etc. Complete. For Solar ( Mjp Dsr 2022-23 Sect. G- Item No 8B Page No. 52 ) 51 Filling In Plinth & Floors Murum Bedding In Trencheswith Approved Murum From Excavated Materials From Foundation. 15 Cm To 20 Cm Layers Including Watering & Compaction Complete. ( Mjp Dsr 2022-23 Sect. G- Item No 8B Page No. 49 ) 52 Fillingin Plinth And Floor / Trenches With Contractor Murum For Bedding In 15Cm To 20Cm Layer Including Waterin And Compaction Complete ( Mjp Dsr 2022-23 Sect.E Item No 17 Page No. 42 ) 53 For Structureproviding Structural Steel Work In Trusses Other Similar Trussed Purlins And Members With Bracing Gusset Plates Etc. As Per Detailed Design And Drawing Or As Directed By Engineer In Charge Including Cutting Fabricating Hoisting Erecting And Fixing In Position Making Riveted Bolted Welded Connections And One Coat Of Anticorrosive Paint And Over It Two Coats Of Oil Painting Etc. Completebd-C-8 / 278 Mjp Dsr 2022-23 Sect. F Item No 6 54 Providing And Applying 2 Coats Of Alluminium Paint Of Approved Make To New Structural Steel Work In Buildings And Workshops Including Scaffolding If Necessary, Cleaning And Preparing The Surface ( Excluding Primer Coat ) Etc. Complete Pwd Dsr 2022-23 35.06 Bdo 4A 55 Providing And Applying Primer And One Coat Of Red Oxide Of Iron Paint Externally Including Cleaning The Surface Of Pipe With Steel Scrapers Wire Brushes And Metal Cleaning Solution Etc Completepwd Dsr 2022-23 35.07 Bdo 5 ( Sect. I ( Xvi ) Item No 18 Page No. 185 ) 282 56 For Structure ( Plus ) Providing And Applying Material & Labour For Hot Dip Galvanizing Of Above Structure Including Transportation For Galvanizing As Per Market Rate 57 For Structure- Transporting Charges Of Vehicle Per Trip For Appox. 100 Km Leadincluding Loading Unloading & Stacking Charges. Mjp Dsr 2023-24 Sect. C Statement Iv Page No. 11 58 Providing & Erecting Chain Link Fencing 1.6 Mtr Height With G I Chain Linkof Size 50 X 50 Mm 8 Swg Thick And Fixed 75 Mm Above Gl Verticalm.S. Angle Of 40 X 40 X 6 Mm Size Embedded In Cc Block 1 :4: 8 Mix Of Size 450 X 450 X 670 Mm At 1.75 M Centre To Centre With Iron Bar 16 Mm Dia As A Hold Fast Including Welded Link With Angle Frame At 30 Cm Centre To Centre Nuts & Bolts & Horizontal Ms Angle At Top& Bottom Of 25 X 25 X5 Mm Size & Vertical Ms Flat 35 X 5 Mm & 25 X5 Mm Horizontal Including Cross Supports Of 40 X 40 X 6 Mmangle Both Sides At Every Corner In Cc With 3 Coat Of Oil Painting Etc Complete ( Pwd Ssr 2022-23 Bd-W-Item No.46.39 Page No 285 ) 59 Providing & Fixingm S Grill Gate Withframe Having Weight Of Gate 20 Kg / Sqm As Per The Detailed Drawing Including Hinges, Pivot Blocks Locking Arrangement Welding Riveting And Three Coats Of Oil Painting Of Approved Shed Etc. Complete. ( Pwd Ssr 2023-24 Bd-W- 6, Item No.23.09 60 Providingandfixingmildsteelgrillgatewithangleironframe65mmx65mmx10mmwithironbarsat150mmc / Canddiagonalflatsasperthedetaileddrawingincludinghinges, Pivotblocklockingarrangement, Weldingrivetingandoilpaintingofthreecoatsof Approved Shade Weight Of Gate 35 Kilogram / Smt. ( Pwd Ssr 2022-23 Bd-W- 6, Item No.44.10 61 Providing Second Class Burnt Brick Masonry With Conventional / I.S.Type Brick Since Mentmortar 1:6 In Foundation Sand Plinth Of Inner Walls / In Plinthe Xternal Walls Including Bailing Out Water Manually, Striking Joints On Unexposed Faces, Raking Out Joints On Exposed Faces And Watering Etc. Complete. Pwd Ssr 2022-23 Sr. No. 894 Page No. 242 I.No. 27.01 62 Providing And Laying Cast In Situ / Ready Mix Cement Concrete M-20 Of Trap / Granite / Quartzite / Gneiss Metal For Rcc Work In Foundations Like Rauft, Strip , Foundations, Etc. Comp..... Pwd Ssr 2022-23 Sr. No. 841 Page No. 219I.No. 25.11 63 Providing And Supplying In Standard Lengths Isi Mark Rigid Unplasticised Pvc Pipes Suitable For Potable Water With Solvent Cement Joints Including Cost Of Couplers, As Per Is Specification No. 4985 / 1988 Excluding Gst Levied By Goi And Gom In All Respect, Including Transportation, Freight Charges, Inspection Charges, Loading, Unloading, Conveyance To The Departmental Stores And Stacking The Same In Closed Shed Duly Protected From Sun Rays And Rains Including Cost Of Jointing Material I.E. Solvent Cement, Etc. Complete ( Selffit Type To Be Jointed With Cement Solvent ) . Mjp Ssr 2023-24 Sr.No. Ii 1 B Vii 64 Providing And Fixing Board Displaying Information Such As Name Of Work, Tender Cost, Name Of Contractor, Work Completion And Liability Period Etc Having Rectangular Shape Of 1.20M X 0.90M Size Made Out 18 Guage ( 1.25Mm ) Thick Mild Steel Sheet Painted With One Coats Of Azainc Chromate Stoving Primer And Two Coats Of Enamel Paint On Front Side And Grey Stove Enamel On Back Side And Border / Messages / Symbols Etc Size 35 X 35 X 3 Mm Frame With Property Cross Braced M.S Angles Of Size 35Mm X 35Mm X 3Mm Duly Painted Including Two M.S Angle Iron Posts Of Size 65Mm X 65 Mm X 6Mm, 3.65 M Long Painted With Alternate Black And White Bands Of 25 Cm Width Including All Fixtures Etc And Fixing The Boards In 1:4:8 Concrete Block On Size 60 Cm X 75 Cm Including Excavation, Refilling, Transporations And Labour Etc Complete.Pwd - Civil Csr :- 2022-23 I.No- 6.36 Pno.60 65 Providing And Fixing H.D.P Container Syntex Or Alike One Piece Moulded Water Tank Made Out Of Low Density Polyethyleneand Built Corrugation Including Of Delivery Up To Destination Hoisting And Fixing Of Accessories Such As Inlet, Outlet Overflow Of All Tanks Capacity Above 100 To 1000 Liters As Per Is- 12701 As Per Pwd Ssr 2022-23Item No. 42.53 Reference Bdv Page No. 300 66 Providing And Fixing H.D.P Container Syntex Or Alike One Piece Moulded Water Tank Made Out Of Low Density Polyethyleneand Built Corrugation Including Of Delivery Up To Destination Hoisting And Fixing Of Accessories Such As Inlet, Outlet Overflow Of All Tanks Capacity Above 1000 To 20, 000 Liters As Per Is- 12701 As Per Pwd Ssr 2022-23Item No. 42.54 Reference Bdv Page No. 300 67 Providing & Laying Of Isi Mark Gi Pipe Of Medium Class 25 Mm Dia. Including All Local & Central Taxes, Octroi, Inspection Charges, Transportation To Sores, Etc. Complete. With One End Coupling For Full Length Pipe. As Per Is 1239 / 2004 Mjp Dsr 2019-20 Sect.I ( Iv ) Item No 1 B-3 Page No.70 & Item No .2 B-3 Page No. 99. 68 Providing & Laying Of Isi Mark Gi Pipe Of Medium Class 50 Mm Dia. Including All Local & Central Taxes, Octroi, Inspection Charges, Transportation To Sores, Etc. Complete. With One End Coupling For Full Length Pipe. As Per Is 1239 / 2004 Mjp Dsr 2019-20 Sect.I ( Iv ) Item No 1 B-3 Page No.70 & Item No .2 B-3 Page No. 99. 69 Providing & Laying Of Isi Mark Gi Pipe Of Medium Class 65 Mm Dia. Including All Local & Central Taxes, Octroi, Inspection Charges, Transportation To Sores, Etc. Complete. With One End Coupling For Full Length Pipe. As Per Is 1239 / 2004 Mjp Dsr 2022-23Sect .I ( Iv ) Item No 1 B-3 Page No.70 & Item No .2 B-3 Page No. 99. 70 Providing And Fixing G.I Specials Such As Bend, Tee, Coupler As Mjp Elect. / Mechcsr 2022-23 Item No. Pw2-3-4-5, Pw1-7 Page No. 14, 1565Mm Dia Elbow 71 Providing And Fixing G.I Specials Such As Bend, Tee, Coupler As Mjp Elect. / Mechcsr 2022-23 Item No. Pw2-3-4-5, Pw1-7 Page No. 14, 15 25Mm Dia Elbow 72 Providing And Fixing G.I Specials Such As Bend, Tee, Coupler As Mjp Elect. / Mechcsr 2022-23 Item No. Pw2-3-4-5, Pw1-7 Page No. 14, 15 65Mm Dia Tee 73 Providing And Fixing G.I Specials Such As Bend, Tee, Coupler As Mjp Elect. / Mechcsr 2022-23 Item No. Pw2-3-4-5, Pw1-7 Page No. 14, 15 25 Mm Dia Tee 74 Providing And Fixing G.I Specials Such As Bend, Tee, Coupler As Mjp Elect. / Mechcsr 2022-23 Item No. Pw2-3-4-5, Pw1-7 Page No. 14, 15 65 Mm Dia Coupler / Socket 75 Providing And Fixing G.I Specials Such As Bend, Tee, Coupler As Mjp Elect. / Mechcsr 2022-23 Item No. Pw2-3-4-5, Pw1-7 Page No. 14, 15 25 Mm Dia Coupler / Socket 76 Providing And Fixing G.I Specials Such As Bend, Tee, Coupler As Mjp Elect. / Mechcsr 2022-23 Item No. Pw2-3-4-5, Pw1-7 Page No. 14, 15 G.I. Union Duty 25Mm 77 Providing And Fixing G.I Specials Such As Bend, Tee, Coupler As Mjp Elect. / Mechcsr 2022-23 Item No. Pw2-3-4-5, Pw1-7 Page No. 14, 15 G.I. Union Duty 65Mm 78 Lowering Laying And Jointing G. I Pipes And Specialsof Following Class And Dia Including Conveyence From Store To Site Of Work. Medium Classmjp Dsr2022-23 Sect. 1-4 Item No.- 2-B P.No.102 A ) 25 Mm Dia. 79 Lowering Laying And Jointing G. I Pipes And Specialsof Following Class And Dia Including Conveyence From Store To Site Of Work. Medium Classmjp Dsr2022-23 Sect. 1-4 Item No.- 2-B P.No.102 A ) 50 Mm Dia. 80 Lowering Laying And Jointing G. I Pipes And Specialsof Following Class And Dia Including Conveyence From Store To Site Of Work. Medium Classmjp Dsr2022-23 Sect. 1-4 Item No.- 2-B P.No.102 B ) 65 Mm Dia. 81 Providing And Supplying In Standard Lengths Isi Mark Rigid Unplasticised Pvc Pipes Suitable For Potable Water With Solvent Cement Joint Including Cost Of Coupler As Per Isi Specification No. 49856 / 1998 Excluding Gst Levied By Goi And Gom In All Respect , Including Transportation , Freight Charges , Inspection Charges Loading, Unloading , Conveyance To The Department Stores And Stacking The Same In Closed Shed Duly Protected From Sun Rays And Rains Including Cost Of Jointing Material I.E. Solvent Cement Etc ( Self Fit Type To Be Jointed With Cement Solvent ) Working Pressure 4 Kg / Sq.Cm. 75Mm Dia 82 Providing And Supplying In Standard Lengths Isi Mark Rigid Unplasticised Pvc Pipes Suitable For Potable Water With Solvent Cement Joint Including Cost Of Coupler As Per Isi Specification No. 49856 / 1998 Excluding Gst Levied By Goi And Gom In All Respect , Including Transportation , Freight Charges , Inspection Charges Loading, Unloading , Conveyance To The Department Stores And Stacking The Same In Closed Shed Duly Protected From Sun Rays And Rains Including Cost Of Jointing Material I.E. Solvent Cement Etc ( Self Fit Type To Be Jointed With Cement Solvent ) 75 Mm Dia. 6 Kg / Sq. Cm 83 Providing And Supplying In Standard Lengths Isi Mark Rigid Unplasticised Pvc Pipes Suitable For Potable Water With Solvent Cement Joint Including Cost Of Coupler As Per Isi Specification No. 49856 / 1998 Excluding Gst Levied By Goi And Gom In All Respect , Including Transportation , Freight Charges , Inspection Charges Loading, Unloading , Conveyance To The Department Stores And Stacking The Same In Closed Shed Duly Protected From Sun Rays And Rains Including Cost Of Jointing Material I.E. Solvent Cement Etc ( Self Fit Type To Be Jointed With Cement Solvent ) 110 Mm Dia. 6 Kg / Sq. Cm 84 Providing And Supplying In Standard Lengths Isi Mark Rigid Unplasticised Pvc Pipes Suitable For Potable Water With Solvent Cement Joint Including Cost Of Coupler As Per Isi Specification No. 49856 / 1998 Excluding Gst Levied By Goi And Gom In All Respect , Including Transportation , Freight Charges , Inspection Charges Loading, Unloading , Conveyance To The Department Stores And Stacking The Same In Closed Shed Duly Protected From Sun Rays And Rains Including Cost Of Jointing Material I.E. Solvent Cement Etc ( Self Fit Type To Be Jointed With Cement Solvent ) 160 Mm Dia. 6 Kg / Sq. Cm 85 Providing And Fixing P.V.C. Rain Water Pipes Of 160Mm Outer Diameter And Having Wall Thickness Of 2.2 To 2.7 Mm Confirming To I.S. 13592-1992 Including Proper Rainwater Receiving Recess With P.V.C. Plug, Bend, Necessary Fittings, Such As, Offsets, Shoes, Inluding Fixing The Pipe On Wall Using Approved Wooden Cleats Projecting 25Mm To 40Mm From Face Of Wall A Fixing With Clips Of Approved Quality And One Number , Filing The Joint Using Rubber Gasket With Solvent Cement And Properly Resting The Shoe Of Pipes On C.C. Or Masonry Blocks, Including Necessary Scaffolding And Maintenance For 3 Yrs For Any Leakages Or Dislocations Of Pipes. All The P.V.C. Fittings And Additional 2 Piece Socket Clips Shall Be Got Approved From Engineer In Charge Etc. Complete. Pwd Ssr 2022-23 Sr. No.1461Page No. 353 86 Providing And Fixing Of Cgwp / Griha Approved Pure Rain Filter 700 Mm Dia With 300 Mm Dia Inlet And Outlet To Accumulate Storm Water Having Deselting Suspended Solid Catch Made Out Of Frp ( Fibre Reinforced Polymer ) With Stainless Steel 304 Grade Strainers, Having Steel Bucket Of 600 Micron Capable Of Eliminating Finer Particulate Matter Upto 160 Micron Filtration Made Of Stainless Steel Net With Long Fibre Foam Of 25 Mm Thickness, Blue Colour, Filtration Capacity 40-80 Kilolitres ( Including 1 Nos. Of Extension Of 600 Mm Depth ) ( Market Rate ) 87 Lowering Laying And Jointing With P.V.C. Pipe And Specialsof Following Class And Dia Including Conveyence From Store To Site Of Work. Including Cost Of Labour , Material , Except Cement Solvent , Rubber Ring As Per Is Code Etc, Completeworking Pressure Of75 Mm Dia. 4 Kg / Sq. Cm 88 Lowering Laying And Jointing With P.V.C. Pipe And Specialsof Following Class And Dia Including Conveyence From Store To Site Of Work. Including Cost Of Labour , Material , Except Cement Solvent , Rubber Ring As Per Is Code Etc, Completeworking Pressure Of 6 Kg / Sq.Cm. 75 Mm Dia. 6 Kg / Sq. Cm 89 15 Mm Dia Service Water Tapconnection For Distributionnetwok Of Mdpe / Upvcpipe Without Road Crossing As Per Mjp Ssr 2023-24 Sec - H, Item No -17 Apage No. 65 90 15 Mmdia Service Water Tapconnection For Distributionnetwok Of Mdpe / Upvcpipe With Road Crossing Asper Mjp Ssr 2023-24 Sec - H, Item No -17 Apage No. 65 91 Providing And Fixing Screw Down Required Dia Wheel Stop Tap Of Brass Including Necessary Socket , Union Nuts , Testing Etc Complete ( Prior Approval Of Sample And Brand By Executive Engineerids Necessary Before Use ) Type Of 65 Mm Dia ( As Per Pwd Ssr 2022-23 Item No 41.49 - Bdv-9A Page No 259 ) 92 Providing And Fixing Screw Down Required Dia Wheel Stop Tap Of Brass Including Necessary Socket , Union Nuts , Testing Etc Complete ( Prior Approval Of Sample And Brand By Executive Engineerids Necessary Before Use ) Type Of 40 Mm Dia ( As Per Pwd Ssr 2022-23 Item No 41.49 - Bdv-9A Page No 259 ) 93 Providing And Fixing Screw Down Required Dia Wheel Stop Tap Of Brass Including Necessary Socket , Union Nuts , Testing Etc Complete ( Prior Approval Of Sample And Brand By Executive Engineerids Necessary Before Use ) Type Of 25 Mm Dia ( As Per Pwd Ssr 2022-23 Item No 41.45 - Bdv-9A Page No 346 ) 94 Providing And Fixing Screw Down Required Dia Wheel Stop Tap Of Brass Including Necessary Socket , Union Nuts , Testing Etc Complete ( Prior Approval Of Sample And Brand By Executive Engineerids Necessary Before Use ) Type Of 50 Mm Dia ( As Per Pwd Ssr 2022-23 Item No 41.48 - Bdv-9A Page No 346 ) 95 Providing And Erecting C.I.D.F. Sluice Valve With Joint To Pipe Workwithout By Pass Arrangementpn 1.6 , 65Mm Dia 96 Providing And Erecting C.I.D.F. Sluice Valve With Joint To Pipe Work Without By Pass Arrangementpn 1.6 , 80Mm Dia 97 Lowering Laying And Jointing In Position Followingc.I.D.F. Sluice Valve, Reflux Valve, I.E. All Labour , Jointing Material I.E. Nut Bolts And Giving Satisfactory Testing 65Mm Dia 98 Lowering Laying And Jointing In Position Followingc.I.D.F. Sluice Valve, Reflux Valve, I.E. All Labour , Jointing Material I.E. Nut Bolts And Giving Satisfactory Testing 80Mm Dia 99 Supplying And Erecting Non Return Valve 25 Mm Diameter In Position Made Of Gun Metalas Per Pwd Electricalcsr 2022-23 Specification No. Cw-Plb / Gp 16-6-21 Page No 247 100 Supplying And Erecting Non Return Valve 40 Mm Diameter In Position Made Of Gun Metalas Per Pwd Electricalcsr 2022-23 Specification No. Cw-Plb / Gp 16-6-21 Page No 247 101 Supplying And Erecting Non Return Valve50 Mm Diameter In Position Made Of Gun Metalas Per Pwd Electricalcsr 2022-23 Specification No. Cw-Plb / Gp 16-6-21 Page No 247 102 Supplying And Erecting Non Return Valve 65 Mm Diameter In Position Made Of Gun Metalas Per Pwd Electricalcsr 2022-23 Specification No. Cw-Plb / Gp 16-6-21 Page No 247 103 Supplying & Erecting Float Sensor Switch For Water Level Controller Working On 250V & Rated Current 8A, With 2 Mtr. Wire & High Quality Of Wire & Plasticbody. 104 Supplying & Erecting Water Level Controller 230 / 415 V.A.C, Four Wayfor Under Ground & Overhead Tank Operation. Pwd Csr ( Ele 2022-23 Item No. 12-4-15 Page No 105 Supplying & Erecting Mains With 2X1.5 Sq.Mm. And Earth Wire 1.5 Sq.Mmfr Pvc Copper Wire, In Rigid Pvc Conduit Min.20Mm Dia, As Per Pwd Csr ( Ele 2020-21 : Wg-Ma / Pc, Item No 1-6-1 Page No 08 106 Hydraulic Testing Of Pvc Pipeline To Specified Pressure Including Cost To Fall Materials And Labour And Water For Testing For Specified Length Including Cutting, Placing End Cap Making Arrangementfor Filling Safe Water Using Reciprocating Type Pumps Which Should Be Able To Provide Specified Test Pressure Gauges And Other Necessary Equipments, Labour, Operation Charges, Etc. Required For Testing. The Rate Under This Item Shall Also Include Cost To For Testing, If Necessary And Reinstating To Original Position. 75Mm Dia Pvc 6 Kg / Cm^2 107 Commissioning Running And Maintaining The Scheme To Quantities, Rated Capacity, Including Manning Necessary Personnel Such As Operator, Valve Man Etc As Per Requirement Of The Scheme And Who Should Also Administer Chemical Dose For A Period Of 1 Year For Individual Scheme And 1 Years For Regional Scheme, Together With Training Of Persons Spared By Mjp / Local Body And Handing Over The Scheme To Local Body After Completion Of The Above Period As Directed By Engineer In Chargeetc. Complete. 108 Installation Commissioning And Trialrun Of Min 3 Monthafter Successfull Installationofsolar Energy Based R.O. Plus Uvof 25 Lph Capacity Warrantee Of 1 Year From Date Of Successful Commissioning , 109 Installation Commissioning And Trialrun Of Min 3 Monthafter Successfull Installationof Solar Energy Based R.O. Plus Uvof 50 Lph Capacity Warrantee Of 1 Year From Date Of Supply, 110 Installation Commissioning And Trialrun Of Min 3 Monthafter Successfull Installationofsolar Energy Based R.O. Plus Uvof 100 Lph Capacity Warrantee Of 1 Year From Date Of Successful Commissioning , 111 Installation Commissioning And Trialrun Of Min 3 Monthafter Successfull Installationof Solar Energy Based R.O. Plus Uvof 250 Lph Capacity Warrantee Of 1 Year From Date Of Successful Commissioning , 112 Installation Commissioning And Trialrun Of Min 3 Monthafter Successfull Installationofsolar Energy Based R.O. Plus Uvof 500 Lph Capacity Warrantee Of 1 Year From Date Of Successful Commissioning , 113 Installation Commissioning And Trialrun Of Min 3 Monthafter Successfull Installationof Solar Energy Based R.O. Plus Uvof 1000 Lph Capacity Warrantee Of 1 Year From Date Of Successful Commissioning , 114 Dismantleexisting Structure And Removal Existing Water Storage Tank Of 5000 Lit Capacity And Again Placed Tank On G.I. Structure After Installation , Including Labour , Machinary And Required Tool 115 Construction And Providing Two Tap Standpost 116 Rwh - Shallow Percolation Pit Providing, Constructing 2.0M Deep Shallow Depth Percolation Pit Comprising Of 1.0M Dia Pre-Cast Rcc Rings, 300Mm Thick Side Filling Around Outside Of Rcc Rings ( Annular Space ) With 40Mm Size Boulders Including Filling Of Percolation Pit Up To 0.5M Depth ( From Bottom Up ) With 25-75Mm Clean Washed Gravels Followed By 0.5M Depth Of 10-25Mm Of Clean Washed Stones Followed By 0.5M Of Washed River Fine Aggregate ( Natural Sand / Crushed Sand Vsi Grade Finely Washed Etc. ) Including Netlon Mesh Between Each Gravel / Fine Aggregate ( Natural Sand / Crushed Sand Vsi Grade Finely Washed Etc. ) Media Layer Including Covering With Rcc Slab, Manhole Frame & Cover, Pvc Rungs Etc. Including Arrangement For Inlet & Outlet Pipe, Excavation & Backfilling As Shown In The Drawing. The Rate Shall Be Inclusive Of All Labour, Material, Wastage, Scaffolding, Transportation, Taxes, Including All Leads, Lifts At All Levels. All Material Should Be Of Approved Make. All Works Complete As Per The Drawing, Technical Specification And Direction Of The Engineer In Charge As Per Pwd Ssr2022-23 Item No. 48.46 Page Nos 302 117 Supplying , Installing , Testing And Commissioning Of Solar Led Mini High Mast20 W X 5 Nos . Led Lumanaries , 2 Nosx 150 Ah 12 V Lithium Battery, Min. 400 Wpspv Modules Mounted On Gi Octagonal Pole With Bottom Of 130 Mm A / F Top 70Mm A / F 6 Mtr Height Along With Bracket , Foundation Earthing And Necessaries Accessories , Water Proof Battery Box, Suitable Solar Inverter , Timer Setting Arrangement, Gi / Powder Coated Module Structure , With First 6 Hrs Full Intensity Light Output And Following 6 Hrs With Half Intensity Light Output Along With Solar And Local Electrical Power Supplyarrangement, Wave Solar Powersupply Charging Fascility Complete. With 5 Year Warrantee ( 1. Solar Comprising Mono Crystalline Photovoltaic Cell Of The Same Capacity.2. Inclusive Of Total System Commissing, Istalling , Tramsportation , Insurance With 5 Years Of Amc / Cmc Specification Nos.As Per Pwdelectrical Mech Csr2022-23 Item No 4-3-14 118 Supplying, Installing, Testing And Commissioning Solar Streetlight Pole Comprising Of 9 W Led Fitting, 12V 18Ahmaintenance Free Lithium Battery, Min. 40 Wp Spv Module, Mspowder Coated Battery Box Weather Proof, Mounted On 75 / 80Mm Dia. B-Grade Gi Pole Of 6 M. Height Along With Brackets, Foundation, Earthling And Necessary Accessories Complete.Specification No. Esd-Sol-Stl ( With 5 Years Warrantee )
Contract Date: Jan 22, 2026 Contract Value : ₹ 87.23 Lakh
Government Departments No of Bidders 8
Maharashtra View Result →
TenderDetail
Loading tenders