View Bid Results For Position Transmitter Tenders

We found 484 Bid Results related to position transmitter tenders. You can find Contractor details who won position transmitter tenders along with contract details in Bid awards announcements section.

Indian Tenders
20
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
1
Live Opportunities Worldwide
Filters
Stage
368
86
30
Tender Publishing Platform
196
288
State / UT
28
67
66
61
60
26
26
25
14
14
13
13
12
12
11
11
8
8
7
7
6
5
3
3
2
1
1
1
1
Contract Value
129
124
172
58
Publish Date
2
0
0
0
0
Sector
24
121
99
49
36
36
19
17
17
17
17
11
9
6
5
5
5
4
4
2
1
1
1
1
1
Ownership
6
289
107
48
26
13
1
Within keyword
Active filters:
Showing 1–10 of 484 tenders matching your filters
Odisha View Result →
2.
Public Administrative Department #11458204 Technical Bid
supply and installation of electrical material and repairing, rewinding of motor pumps required and supply of material for daily repair works of water supply pipe line and pumps on for daily repair works of water supply on yearly basis , cable , 2.5 sq.mm submersible cable three core (copper) isi mark , 4 sq.mm submersible cable three core (copper) isi mark , 6 sq.mm submersible cable three core (copper) isi mark , 10 sq.mm submersible cable three core (copper) isi mark , 16 sq.mm submersible cable three core (copper) isi mark , 25 sq.mm submersible cable three core (copper) isi mark , 35 sq.mm submersible cable three core (copper) isi mark , cable with aluminum armored 3 core 50sqmm , cable with aluminum armored 3 core 70sqmm , fuse cut out , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 300 ampere , fuse wire , 16 ampere , 32 ampere , 63 ampere , 100 ampere , m.c.c.b l &t make , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , 300 ampere , 500 ampere , h.r.c.fuse , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , 300 ampere , 500 ampere , main switch 3 pole , 16 ampere , 32 ampere , 63 ampere , 100 ampere , 150 ampere , 200 ampere , 250 ampere , providing and erecting transformer new ab switch complete set. , l.t. l.k. mk -1 dol starter 3 h.p./5 h.p. , no volt coil , contact patti set , relay , contact block , new starter set for 3 h.p./5 h.p. , 15/10 h.p. starter /star delta starter (l&t make mk-1) , no volt coil , contact patti set , relay , contact block , new starter set for 10 h.p./15 h.p. mk -1 , new starter set for 10 h.p./15 h.p. mu-g20 , contactor , mnx -225 , mnx -110 , mnx -a2 , mnx -a1 , mnx -25 , mnx -9 , ml -2 , ml -4 , oil starter 50 h.p. , contact fix patti , contact moving point , no volt coil , fibre plate , conection plate , starte minoir repairing , supplying & erecting new connection terminal beckelite connection plate with copper lugs & copper nut bolt for 50 hp , l&t co2-200 cos - 200a , l&t thermal overload relay mn 12 ct ratio 30 , single phase preventor minilec make , l&t capacitor 1/3 phase , l&t main switch dn-3 630 d , l&t mccb dn-2 250a , l&t mccb du-250 , relay 30a- 50a , relay 20a- 33a , fn 100 tpn switch disconnector fuse unit , l&t make fasd starter ml 1.5 suitable for 10/15 hp , 50 h.p.ats starter , timer , auxiliary switch , on off switch , no volt coil , monir repairing , 80 h.p. ats starter , timer , auxiliary switch , on off switch , monir repairing , 100 h.p. ats starter , timer , auxiliary switch , on off switch , monir repairing , aluminium lugs , 16 mm , 25 mm , 35 mm , 50 mm , 70 mm , 95 mm , 120 mm , 150 mm , 185 mm , 240 mm , 300 mm , copper lugs , 16 mm , 25 mm , 35 mm , 50 mm , 70 mm , copper bus bar , crimping tool manual , crimping tool hydraulic operated , transformer bush hv/lv 63/100/160/ kva , transformer rod hv/lv 63/100/160 kva , transformer oil filter , transformer new oil filling (filtered) , rewinding of motors , 1 hp el. motor (mono block) rewinding with material and labour , 3 hp el. motor (mono block) rewinding with material and labour , 5 hp el. motor (mono block) rewinding with material and labour , 10 hp el. motor (mono block) rewinding with material and labour , 15 hp el. motor (mono block) rewinding with material and labour , 1 hp el. motor (submersible) rewinding with material and labour , 2 hp el. motor (submersible) rewinding with material and labour , 3 hp el. motor (submersible) rewinding with material and labour , 5 hp el. motor (submersible) rewinding with material and labour , 7.5 hp el. motor (submersible) rewinding with material and labour , 10 hp el. motor (submersible) rewinding with material and labour , 15 hp el. motor (submersible) rewinding with material and labour , 20 hp el. motor (submersible) rewinding with material and labour , 30 hp el. motor (submersible) rewinding with material and labour , 35 hp el. motor (submersible) rewinding with material and labour , 80 hp el. motor (submersible pump ) rewinding with material and labour , 100 hp el. motor (submersible) rewinding with material and labour , 3 hp el. motor (submersible mono block) rewinding with material and labour , 5 hp el. motor (submersible mono block) rewinding with material and labour , 7.5 hp el. motor (submersible mono block) rewinding with material and labour , 10 hp el. motor (submersible mono block) rewinding with material and labour , 15 hp el. motor (submersible monoblock) rewinding with material and labour , 30 hp el. motor (submersible mono block) rewinding with material and labour , 50 hp el. motor (vt pump ) rewinding with material and labour , 2 hp mud pump set (vertical) rewinding with material and labour , 3 hp mud pump set (vertical) rewinding with material and labour , 5 hp mud pump set (vertical) rewinding with material and labour , 10 hp mud pump set (vertical) rewinding with material and labour , 15 hp mud pump set (vertical) rewinding with material and labour , minor repairing/ overhauling of pumps , 1 hp pump , 2 hp pump , 3 hp pump , 5 hp pump , 10 hp pump , 15 hp pump , 30 hp pump , 80 hp pump , repairs and maintenance 50hp vt pump for igatpuri city water supply scheme vertical turbine pump (water lubricated) incliding dowl assembly and discharge hed etc. on provided channel/rsj/rcc beam including erecting on providing sole plate with blue matching , a) removing , b) dismenting , bowl assembly loading, unloading, scrapping & cleaning, checking the bowl assembly… etv complete , making bowl shaft remetalising, machining, impeller fiting size machining… etc complete , making bowl bush bronze metal machining pressing thrugh & boaring… etc complete. , making impeller and impeller neck ring through cut& balancing work… etc complete. , making bowl body neck ring machining as per required impeller size… etc complete. , making impeller collet and lock machining and fitting… etc complete. , making new strainer with stainless steel jail… etc complee , supplying misc sundry & hardware material like new nut bolt gasket packing and gland packing… etc complete. , making threading work for line shaft of 5ft length and facing through polish… etc complete. , making line shaft new coupling as sleeve reconditioning and thrugh polish… etc complete. , making gland shaft stainless steel remetalising machining and through polish… etc comlete. , making old (gm) impeller nackring repairing on lathe machine work…etc complete. , bowl assembly, dismentaling & removing al parts and re-installing property labour charges. , making new line shaft 316 materal including of lathe machining work. , making rubber bush reconditioning…etc complete. , providing and erecting new rubber spider. , making 250mm column pipe-each 5 feet length scrapping & de rusting colouring and painting work…etc complete , transportation of dismantled parts of pump fom raw water pumping to nashik work shop including loading unloading…etc complete , transportation of dismantled parts of pump after repairing from nashik work shop to raw water pumping site with loading unloading …etc complete , assembling and re-erection of 50hp vt pump set at actual site. , supplying & erecting new coupling set with nut bolts and rubber. , supplying & erecting new line shaft s.s lenght – 5 feet. , supplying & erecting new line shaft coupler , supplying & erecting new line shaft sleeve , supplying & erecting new bowl shaft , repairs and maintenance 50hp vhs electric motor for , a) removing 50 hp vhs electric motor , b) dismantling 50 hp vhs electric motor , transportation of above motor form nashik work shop site to raw water pumping including loading & unloading with tools & tackles etc complete , rewinding and repairs of squirrel cage including motors 440 v,3 phase 50 cycles/sec, 1500 rpm with b class insulation including heating, oven baking varnishing, painting etc complete. (60 hp motor) , supplying taper roller bearing fag x-life 29326 , supplying ball bearing 6320 , supplying gland packing 20 mm , supplying champion packing 3m x 200m , a) assembling 50hp vhs electric motor , b) re- erection of 50hp vhs electric motor , transportation of dismantled parts of pump after repairing from nashik work shop to raw water pumping site with loading unloading …etc complete , supplying & erecting new connection terminal backlit connection plate with copper lugs & copper nut bolt for 60hp motor , supplying copper lugs 70sq.mm , 3 hp motorpump replacement of bearing (submersible/monoblock) , 5 hp motorpump replacement of bearing (submersible/monoblock) , 10 hp motorpump replacement of bearing (submersible/monoblock) , 15 hp motorpump replacement of bearing (submersible/monoblock) , 30 hp motorpump replacement of bearing (submersible/monoblock) , 80 hp motorpump replacement of bearing (submersible/monoblock) , 100 hp motorpump replacement of bearing (submersible/monoblock) , 50 hp motor pump replacement of bearing (turbine pump upper bearing ) bearing no. 7317 bep , 50 hp motor pump replacement of bearing (turbine pump lower bearing ) bearing no. 6212 , minor repairing of electric panels , 5 hp pump panel , 10 hp pump panel , 15 hp pump panel , 30/35 hp pump panel , 50 hp pump panel , 75/80/85 hp pump panel , repairing of 50 hp vfd panel (minor) , repairing of 50 hp vfd panel (major) , repairing of 80 hp vfd panel (minor) , repairing of 80 hp vfd panel (major) , rewinding of tranformer 63 kva , rewinding of tranformer100 kva , rewinding of tranformer 160 kva , supply & installation of new tranformer 63 kva , supply & installation of new tranformer 100 kva , supply & installation of new tranformer 160 kva , supply & installation of new 0.5 hp motor monoblock ( crompton/kirloskar/abb) , supply & installation of new 0.5 hp pistion pump set , supply & installation of new 3 hp motorpump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 5 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 10 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 10 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 10 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 15 hp motor pump set monoblock (crompton/kirloskar/texmo) , supply & installation of new 15 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 15hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 30/35 hp motor open well sub mersible mono block (horizontal ) (crompton/kirloskar/texmo) , supply & installation of new 75/80 hp motor sub mersible (vertical) (ksb/kirloskar/lubi/ cri) , supply & installation of new 2 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 3 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 5 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 10 hp mud pump set (vertical) (ksb/kirloskar) , supply & installation of new 15 hp mud pump set (vertical) (ksb/kirloskar) , providing and erecting of flow meter repairing complete , repairing of flow meter transmitter card , replacements of flow meter electronic sensor , replacement of sensor cable , repairing of constant voltage transformer , repairing of flow meter display card , replacement of smps of flow meter , supplying & erecting 300mm size flow meter , supplying & erecting 200mm size flow meter , providing and supplying in standard lengths isi mark rigid unplasticised pvc pipes suitable for potable water with solvent cement joints including cost of couplers, as per is specification no. 4985 / 1988 excluding gst levied by gol and gom in all respect,including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).(as per mjp dsr 2018-19) , working pressure 4 kg./sq.cm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , working pressure6 kg./sq.cm , 63 mm , 75 mm , 90 mm , 110 mm , 140 mm , 160 mm , providing and supplying in standard lengths isi mark rigid upvc pipes , 15 mm , 20 mm , 25 mm , 63 mm , providing isi mark gi. pipe of following class and dia. including all statutory duties & taxes such as gst levied by goi & gom in all respect, inspection charges, transportation to stores, etc. complete as per is-1239/2004. , medium , 15 mm , 20 mm , 25 mm , 32 mm , 40 mm , 50 mm , 65 mm , 80 mm , 100 mm , 125 mm , 150 mm , supply of necessary items related to hard wares required for daily repair works of water supply pipe line on yearly basis , upvc elbows 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 3 inch , upvc mta 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , upvc fta 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc reducer , size 1/2 x 3/4 inch , size 3/4 x 1 inch , size 1 x 1 1/2 inch , size1 1/2 x 2 inch , size 2 x 2 1/2 inch , size 2 x 3 inch , size 2 1/2 x 3 inch , size 3 x 4 inch , size 4 x 5 inch , size 4 x 6 inch , size 5 x 6 inch , upvc reducer , size 1/2 x 3/4 inch , size 3/4 x 1 inch , size 1 x 1 1/2 inch , size1 1/2 x 2 inch , size 2 x 2 1/2 inch , size 2 x 3 inch , size 2 1/2 x 3 inch , pvc end cap plains 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , upvc end cap plains 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc end cap threaded 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , upvc end cap threaded 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , g. i. end cap threaded (inside threaded ) , size 1/2 inch , size 3/4 inch , size 1 inch , g. i. end cap threaded (outside threaded ) , size 1/2 inch , size 3/4 inch , size 1 inch , pvc socket 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , size 8 inch , upvc socket 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , pvc bend 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , size 8 inch , upvc bend 6kg/cm2 , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , upvc ball valve , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , pvc ball valve , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. bend , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. socket , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , g. i. elbow , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , size 6 inch , g. i. tee , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , size 2.5 inch , size 3 inch , size 4 inch , g. i. barrel nepple , 1/2 x 3 , 1/2x 4 , 1/2x 6 , 1/2 x 9 , 1/2x 12 , 3/4x 3 , 3/4x 4 , 3/4x 6 , 3/4x 9 , 3/4x 12 , 1x 3 , 2x 3 , 3 x 5 , pvc repairing coupler elastomatric , 63 mm. , 75 mm. , 90 mm. , 110mm , 160 mm. , pvc solution , 20 ml , 50 ml , 100 ml , 200 ml , upvc solution , 20 ml , 50 ml , 100 ml , 200 ml , 500 ml , m-seal , 10 gm , 50 gm , 100 gm , 200 gm , 500 gm , taparia spanners open ended , 10-11. , 12-13. , 14-15. , 16-17. , 18-19. , 20-21. , 22-23. , 24-25. , 26-27 , 28-29 , 30-31 , 32-33 , 34-35 , ring spanner , 10-11. , 12-13. , 14-15. , 16-17. , 18-19. , 20-21. , 22-23. , 24-25. , 26-27 , 28-29 , 30-31 , 32-33 , 34-35 , valve cap , 2 valve cap , 3 valve cap , 4 valve cap , 6 valve cap , 8 valve cap , 10 valve cap , 12 valve cap , 14 valve cap , air valve ball , 2 valve ball , 3valve ball , 4 valve ball , 5 valve ball , 6 valve ball , abrasive grinder wheel fo size 6 , abrasive grinder wheel fo size 8 , abrasive grinder wheel fo size 10 , 18(450 mm) size venus/ taparia pipe wrench , 14(350 mm) size venus/ taparia pipe wrench , 12(300 mm) size venus/ taparia pipe wrench , 9(2253 mm) size venus/ taparia pipe wrench , tikav arm (tikav danda) , tata tikav , favada arm ( favada danda) , tata favada , nut bolts as per requirement , nylon rope , industrial rubber sheet , hack -saw frame , gland , hack -saw blade , providing and fixing in position m.s. air valve boxes fabricated with 2mm thick m.s. plate, 30 x 30 x 3 mm size m.s. angle frame, concreting in m-150 for fixing the box in position, appling two coats of oil paint, painting chainage, locking arrangement, etc. complete as directed by engineer-in-charge. , for single ball air valve , for double ball air valve , providing and fixing c.i. road box including loading,unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. , 100mm x 225mm(20kg) , 225mm x 300mm(40kg) , providing , hoisting and fixing in position c.i. manhole, frame and cover of best qualify and of required size and shape with locking arrangements including applying 2 coats of anticorrosive paint, etc. complete, etc. complete. , 90 x 60 cm size and weight 35 kg , rate on weight basis for any size and type of frame and cover , providing and fixing in position m.s. ladder 0.50 m wide consisting of 75 x 10 mm m.s. flats as stringers and 16mm dia m.s. bars in double rows as steps placed at 25 cm c/c including cost of material and labour involved, welding, anchoring and applying 3 coat of anti-corrosive paint, etc. complete as directed by engineer-in-charge. , providing and fixing water level indicator upto 5 m height including m.s. enamelled gauge plate 300mm wide 3mm thick, p.v.c. float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. , providing and fixing water level indicator upto 5 m height including m.s. enamelled gauge plate 150mm wide 3mm thick, p.v.c. float, providing and fixing required accessories such as pointer, pulleys, nylon thread including cost of all material, labour, etc. complete. , rachet drill set isi mark , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , pipe die set , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , g.i. union , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , patti valve m s , 12 mm (1/2) , 20 mm (3/4) , 25 mm (1) , 50 mm (2) , grease castrol , cotton rope , screw driver taparia , tester taparia , insulated electric plier 12taparia , hammer 1/2 kg , hammer 1 kg , hammer 1.5 kg , hammer 2kg , pahar 4 foot , pahar 6 foot , lock godrej 7 levers small size , lock godrej 7 levers big size , providing double flange sluice valve confirming for ls-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspectioncharges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete. , sluice valves - pn -1 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , sluice valves - pn -1.6 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , providing and supplying isi mark cl dif reflux valves (non return valves ) of following dia including raihvay freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding gst levied, by goi & gom in all respect etc. complete. reflux valves as per i.s.5312 part i (1984) , reflux valves ( non return valve) - pn -1 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , reflux valves ( non return valve) - pn -1.6 without bypass , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , 400mm , check nut ( phosphor bronze / gun metal) of sluice valve with machining as per spindle , 50 mm. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , steel wire rope , plastic bucket 10 lit. , plastic bucket 20 lit. , plastic bucket 25 lit. , ghamela/round create 10 , providing q.nd supplying lsl standard d. l. specials & fitting with sealing rubber gasket of s.b.r,complete with cast iron follower gland and m. s. nut bolts coated or otherwise protected from rusting and suitable for d.l.pipes including cost of labour, materials, and transpotlaiion to stores, loading and unhading excluding gst levied by goi & gom in all respect etc. complete as per is-9523 , for all types of specials , bends,tees etc. , 80 to 300 mm dia , providing and supplying isi standard ms specials of required thickness with 3 coats of approved nlake epoxy paint (shalimar, ciba or matiindra & mahindra make) from inside and outside excluding gst levied by goi & gom in all respect including irrspection charges, transportation to stores and stacking, etc. complete. , for all types of ms specials , bends,tees flanges etc. , providing and supplying i.s.l. mark rubber gasket suitable for c.l. or d. l. pipe nf all class for tyton joints including inspection charges, transportation upto departrnental stores excludine gst levied by goi & gom in all respect etc. complete. , s.b.r. gaskets for c. l. / dl pipes. , 80 mm. , 100 mm. , 150mm , 200 mm. , 250 mm. , 300mm , s.b.r. tyton joint rubber ring for mechanical joints , 80 mm. , 100 mm. , 150mm , 200 mm. , 250 mm. , 300mm , providing and supplying in standard lengths polvethelene pioes. confirmino to.ls 4984/14151/12786/13488 latest version with necessary jointing material li ke mechanical connector i. e.thread / insert joint / quick release coupler joint/ compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gl & gom in all respect , pe 100 6 kg/ sq.cm , 25 mm. , 63 mm. , 75 mm. , 110 mm. , concrete breaker machine hitachi make , 6 kg. , 10.5 kg. , 12.5 kg. , 16 kg. , flexible plastic ring pipe ( bangadi pipe) , 25 mm , 50 mm , 75 mm , 110 mm. , plastic drum 200 lit. , flexible rubber pipe 1/2 , flexible rubber pipe 3/4 , flexible rubber pipe 3/4 , ci / ms water tap 1/2 , ci / ms water tap 3/4 , drill tap set 1/2 , drill tap set 3/4 , sintex three layer water tank 500 lit.to 5000 lit. capacity , pvc tail piece 6 kg , 63 mm , 90 mm. , 110mm , lsupply of c. l. mechanical compression flanged / socket tailpiece (popularly known as tm flanged / socket tailpiece) suitable for making flanged connection with the plain barrel of c. l. spun pipes ( as per - ls - 1536 120o1) and d. l pipes ( as per ls: 8329 / 2000).the tailpiec to be supplied complete with sealing rubber gasket of s.b.r, c.l. follower glands and m.s. nut bolts.the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538 /1993. the rates are inclusive of cost of material, freight charges, loading,transportation and unloading at departemental store, excluding gst levied by gol and gom in all respect, etc.complete. , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , supply of c.i. mechanical compression collar coupling suitable for c.l. spun pipes (as per ls-1536/2001) and complete with sealing rubber gasket of sbr, c.1., follower glands and m.s. nut bolts. the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538/1993) including all statutary duties and taxes such as gst levied by gol and gom in all respect . , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , supply of c.i. mechanical compression collar end cap suitable for c.l. spun pipes (as per ls-1536/2001) and complete with sealing rubber gasket of sbr, c.1., follower glands and m.s. nut bolts. the whole assembly should be mechanically and hydraulically tested to the provisions as laid down in ls:1538/1993) including all statutary duties and taxes such as gst levied by gol and gom in all respect . , 80 mm , 100 mm. , 150 mm. , 200mm , 250 mm. , 300mm , di pipe cutter machine heavy duty 600w ac 220- 240 v (make - bosch, hitachi) , ferrule 15mm , ferrule 20mm , ferrule 25mm , brass elbows 15mm , brass elbows 20mm , brass elbows 25mm , gi coupling , size 1/2 inch , size 3/4 inch , size 1 inch , size 1.5 inch , size 2 inch , taplon tape , supply of hdep pipe , 100mm , 150mm , supply of hdep tail pice , 100mm , 150mm , supply of ms flange , 100mm , 150mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
Maharashtra View Result →
3.
Heavy Industries and Public Enterprises #11454331 AOC
Bids Are invited for 974605320000-2-Wire Position Transmitter-Qcnrv Total Quantity : 30
Contract Date: Ref. Documents Contract Value : ₹ 6.10 Lakh
Boards / Undertakings / PSU No of Bidders 3
Tamil Nadu View Result →
4.
Information and Broadcasting #11422661 AOC
Bids Are Invited For Sitc Crs Radio Station Transmitter Of 50 W Fm Set , Sitc Of Self Supported Transmission Tower , Vhf Transmitting Antenna , Low Loss Feeder Cable With N Connector , Studio Monitor Speaker , On Air Broadcast Console Etc , Dynamic Cardioid Microphone , Portable Solid State Field Recorder , Headphones , Broadcast Audio Processor , Dummy Load With Connector , Extra Lightening Protection Circuit , 19 Equipment Rack Ht 5 Ft Mts Equivalent , Work Station With Antivirus For 3 Years , Audio Editing Software , Automation Scheduling Software Licence , Condensor Microphone With Wind Filter And Arm Stand , Audio Distribution Amplifier , Headphone Distribution Amplifier , 10 Kva Online Ups , Xlr 6 Microphone Junction Box , Professional Audio Line Cable , Professional Microphone Cable , Xlr Connecter Male And Female , Trs Stereo Connecter , Professional On Air Studio Light , Digital Clock With Time , Supply And Fixing Of Work Station Table , Supply And Fixing Of Vob Table , Supply And Fixing Of Discussion Table L Shape , Supply And Fixing Of On Air Table And Side Table , Supply And Fixing Of Shoe Rack , Supply Of Low Frequency Acoustic Treatment , Supply Of Acoustic Treatment , Teak Board Skirting , Supply Of Observation Window , Supply Of Observation Window2 , Supply Of Sound Proof Door With Frame Chaukhatt , Supply Of Executive Chairs Revolving, Standard , Supply Of Visitor Chairs Revolving, Standard , T.V 56 Inch Standard Led Type Ips Panel , Sitc Of Vrv Vrf 10.0 Hp Odu , Sitc Of Cassettee Unit 1.0Hp , Sitc Of Cassettee Unit 1.5Hp , Sitc Of Cassettee Unit 2.0Hp , Sitc Of Remot , Supply, Installation, Testing And Commissioning Of Y Joints , Supply And Fixing Of Refrigent Copper Pipe With Insullation , Supply And Fixing Of Refrigent Conduit Pipe 25Mm Pvc , Internet Works Sitc Of Optic Fibre Cable 6 Core Sm , Sitc Of Patch Cord Ofc - 3 Meter Sc-Lc , Sitc Of Pigtail Ofc - 1 Meter , Sitc Of Cat-6A Cable , Sitc Of 19 Inch 6 U Rack , Sitc Of Lan System , Sitc Of Liu 12 Port , Sitc Of Patch Cord Cat-6 -1 Meter , Sitc Of Patch Cord Cat-6 -2 Meter , Sitc Of Patch Cord Cat-6 -10 Meter , Sitc Of Hdpe Pipe , Supplying And Fixing Io Box Alongwith Base And Cover Plate , Sitc Of Cctv Camera With Night Vision - 5 Mp , Supply And Fixing Of Cat-6 Wire In Pvc Conduit , Sitc Of Cctv Camera , Fire Work Sitc Talk Back Slave Station , Sitc Smoke Detector With Built In Led , Sitc 6 Kg Powder Type Fire Extinguishers , Citc 2 Kg Powder Type Fire Extinguishers , Sitc Addressable Manual Call Point Complete As Required. , Civil Works As Per Boq , Cement Work As Pe Boq , Providing And Laying In Position Cement Concrete Of Specified Grade , Double Charge Vitrified Tiles , Centering And Shuttering , Steel Reinforcement For R.C.C. Work , Smooth Finishing Of The Exposed Surface Of R.C.C. Work , Brick Work With Common Burnt Clay , 12 Mm Cement Plaster Of Mix , Partition Upto Ceiling Height , Cement Fiber Board , Frames Of Doors, Windows, Clerestory Windows , Isi Marked Flush Door Shutters , Universal Hydraulic Door Closer , Structural Steel Work , Polishing In High Gloss Matt Finish Melamine , Bright Finished Brass Hanging Type Floor Door Stopper , False Ceiling With Cove And Design At All Height , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint , Providing And Applying White Cement Based Putty , Wall Painting With Acrylic Emulsion Paint , 2Mm Thick Pvc Mat Finished On Floor Of Approved Design , Ac Duct Made Of Wooden Batten , Sitc Of Vertical Blinds , Electrical Works , Wiring For Light Point Etc , Wiring For Circuit , Supplying And Fixing Following Modular Switch Etc , Supplying And Fixing Following Modular Switch Socket , Supplying And Fixing Following Modular Switchs , Supplying And Fixing Modules , Supplying And Fixing Following Way , Supplying And Fixing Miniature Circuit Breaker , Miniature Circuit Breaker Suitable For Inductive Load , Supplying And Fixing Single Pole Blanking Plate , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit , Supplying And Fixing Suitable Size Gi Box Wih Modular Plate , Frls Pvc Insulated Copper Conductor , Frls Pvc Insulated Copper Conductor 2 , Frls Pvc Insulated Copper Conductor3 , Frls Pvc Insulated Copper Conductor,4 , 3X2.5 Mm Flexible Wire For Connection , Wiring For Group Controlled , Led 2X2 Luminaire 36W , Recess Mounted Led Downlighter , Wall Fan With Brush Less Direct Current Bldc Total Quantity : 7162
Contract Date: Ref. Documents Contract Value : ₹ 1.21 Crore
Government Departments No of Bidders 4
Odisha View Result →
5.
Information and Broadcasting #11422660 AOC
Bids Are Invited For Sitc Crs Radio Station Transmitter Of 50 W Fm Set 1 Plus 1 , Sitc Of Self Supported Transmission Tower , Vhf Transmitting Antenna , Low Loss Feeder Cable With N Connector , Studio Monitor Speaker , On Air Broadcast Console Etc , Dynamic Cardioid Microphone , Portable Solid State Field Recorder , Headphones , Broadcast Audio Processor , Dummy Load With Connector , Extra Lightening Protection Circuit , 19 Equipment Rack Ht 5 Ft Mts Equivalent , Work Station With Antivirus For 3 Years , Audio Editing Software , Automation Scheduling Software Licence , Condensor Microphone With Wind Filter And Arm Stand , Audio Distribution Amplifier , Headphone Distribution Amplifier , 10 Kva Online Ups , Xlr 6 Microphone Junction Box , Professional Audio Line Cable , Professional Microphone Cable , Xlr Connecter Male And Female , Trs Stereo Connecter , Professional On Air Studio Light , Digital Clock With Time , Supply And Fixing Of Work Station Table , Supply And Fixing Of Vob Table , Supply And Fixing Of Discussion Table L Shape , Supply And Fixing Of On Air Table And Side Table , Supply And Fixing Of Shoe Rack , Supply Of Low Frequency Acoustic Treatment , Supply Of Acoustic Treatment , Teak Board Skirting , Supply Of Observation Window , Supply Of Sound Proof Door With Frame Chaukhatt , Supply Of Executive Chairs Revolving, Standard , Supply Of Visitor Chairs Revolving, Standard , T.V 56 Inch Standard Led Type Ips Panel , Sitc Of Split Unit 1.0 Tr For Transmission Room , Sitc Of Split Unit 1.0 Tr For Lobby Area , Supply And Fixing Of Refrigent Copper Pipe With Insullation , Shifting And Installation Of Existing Cassette Units , Supply And Fixing Of Refrigent Conduit Pipe 25Mm Pvc , Internet Works Sitc Of Patch Cord Ofc - 3 Meter Sc-Lc , Sitc Of Pigtail Ofc - 1 Meter , Sitc Of Cat-6A Cable , Sitc Of 19 Inch 6 U Rack , Sitc Of Lan System , Sitc Of Liu 12 Port , Sitc Of Patch Cord Cat- 6 -1 Meter , Sitc Of Patch Cord Cat-6 -2 Meter , Sitc Of Patch Cord Cat-6 -10 Meter , Supplying And Fixing Io Box Alongwith Base And Cover Plate , Sitc Of Cctv Camera With Night Vision - 5 Mp , Supply And Fixing Of Cat-6 Wire In Pvc Conduit , Sitc Of Cctv Camera , Fire Work Sitc Talk Back Slave Station , Sitc Smoke Detector With Built In Led , Sitc 6 Kg Powder Type Fire Extinguishers , Citc 2 Kg Powder Type Fire Extinguishers , Sitc Addressable Manual Call Point Complete As Required. , Civil Excavation Works As Per Boq , Cement Work As Pe Boq , Providing And Laying In Position Cement Concrete Of Specified Grade , Centering And Shuttering , Steel Reinforcement For R.C.C. Work , Smooth Finishing Of The Exposed Surface Of R.C.C. Work , Brick Work With Common Burnt Clay , 12 Mm Cement Plaster Of Mix , Partition Upto Ceiling Height , Cement Fiber Board , Wood Work Frame Of Doors, Windows, Clerestory Windows , Structural Steel Work , Polishing In High Gloss Matt Finish Melamine , Bright Finished Brass Hanging Type Floor Door Stopper , Dismantling And Refixing Of Existing False Ceiling With Cove And Design At All Height , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint , Providing And Applying White Cement Based Putty , Wall Painting With Acrylic Emulsion Paint , 2Mm Thick Pvc Mat Finished On Floor Of Approved Design , Sitc Of Vertical Blinds , Providing And Fixing Aluminum Works , Providing And Fixing Aluminum Works For Windows , Providing And Fixing Glazing , Tubular Type Universal Door Closer For Aluminum , Aluminum Tower Bolt , Aluminum Handle , Electrical Works Wiring , Wiring For Light Point Etc , Wiring For Circuit , Supplying And Fixing Following Modular Switch Etc , Supplying And Fixing Following Modular Switch Socket , Supplying And Fixing Following Modular Switchs , Supplying And Fixing Modules , Supplying And Fixing Mcb Db , Supplying And Fixing Miniature Circuit Breaker , Supplying And Fixing Single Pole Blanking Plate , Frls Pvc Insulated Copper Conductor , Frls Pvc Insulated Copper Conductor 2 , Frls Pvc Insulated Copper Conductor3 , Frls Pvc Insulated Copper Conductor,4 , Sitc Of 3X2.5 Mm Flexible Wire For Connection , Wiring For Group Controlled , Led 2X2 Luminaire 36W , Recess Mounted Led Downlighter , Wall Fan With Brush Less Direct Current Bldc Motor Total Quantity : 5084
Contract Date: Ref. Documents Contract Value : ₹ 83.68 Lakh
Government Departments No of Bidders 4
Jammu and Kashmir View Result →
6.
Information and Broadcasting #11422659 AOC
Bids Are Invited For Sitc Crs Radio Station Transmitter Of 50 W Fm Set 1 Plus 1 , Sitc Of Self Supported Transmission Tower , Vhf Transmitting Antenna , Low Loss Feeder Cable With N Connector , Studio Monitor Speaker , On Air Broadcast Console Etc , Dynamic Cardioid Microphone , Portable Solid State Field Recorder , Headphones , Broadcast Audio Processor , Dummy Load With Connector , Extra Lightening Protection Circuit , 19 Equipment Rack Ht 5 Ft Mts Equivalent , Work Station With Antivirus For 3 Years , Audio Editing Software , Automation Scheduling Software Licence , Condensor Microphone With Wind Filter And Arm Stand , Audio Distribution Amplifier , Headphone Distribution Amplifier , 10 Kva Online Ups , Xlr 6 Microphone Junction Box , Professional Audio Line Cable , Professional Microphone Cable , Xlr Connecter Male And Female , Trs Stereo Connecter , Professional On Air Studio Light , Digital Clock With Time , Supply And Fixing Of Work Station Table , Supply And Fixing Of Vob Table , Supply And Fixing Of Discussion Table L Shape , Supply And Fixing Of On Air Table And Side Table , Supply And Fixing Of Shoe Rack , Supply Of Low Frequency Acoustic Treatment , Supply Of Acoustic Treatment , Teak Board Skirting , Supply Of Observation Window2 , Supply Of Sound Proof Door With Frame Chaukhatt , Supply Of Executive Chairs Revolving, Standard , Supply Of Visitor Chairs Revolving, Standard , T.V 56 Inch Standard Led Type Ips Panel , Sitc Of Vrv Vrf 10.0 Hp Odu , Sitc Of Cassettee Unit 1.0Hp , Sitc Of Cassettee Unit 2.0Hp , Sitc Of Cassettee Unit 2.5Hp , Sitc Of Remot , Supply, Installation, Testing And Commissioning Of Y Joints , Supply And Fixing Of Refrigent Copper Pipe With Insullation , Supply And Fixing Of Refrigent Conduit Pipe 25Mm Pvc , Internet Works Sitc Of Optic Fibre Cable 6 Core Sm , Sitc Of Patch Cord Ofc - 3 Meter Sc-Lc , Sitc Of Pigtail Ofc - 1 Meter , Sitc Of Cat-6A Cable , Sitc Of 19 Inch 6 U Rack , Sitc Of Lan System , Sitc Of Liu 12 Port , Sitc Of Patch Cord Cat-6 -1 Meter , Sitc Of Patch Cord Cat-6 -2 Meter , Sitc Of Patch Cord Cat-6 -10 Meter , Supplying And Fixing Io Box Alongwith Base And Cover Plate , Sitc Of Cctv Camera With Night Vision - 5 Mp , Supply And Fixing Of Cat-6 Wire In Pvc Conduit , Sitc Of Cctv Camera , Fire Work Sitc Talk Back Slave Station , Sitc Smoke Detector With Built In Led , Sitc 6 Kg Powder Type Fire Extinguishers , Citc 2 Kg Powder Type Fire Extinguishers , Sitc Addressable Manual Call Point Complete As Required. , Civil Works As Per Boq , Cement Work As Pe Boq , Providing And Laying In Position Cement Concrete Of Specified Grade , Double Charge Vitrified Tiles , Centering And Shuttering , Steel Reinforcement For R.C.C. Work , Smooth Finishing Of The Exposed Surface Of R.C.C. Work , Brick Work With Common Burnt Clay , 12 Mm Cement Plaster Of Mix , Wood Frames Of Doors, Windows, Clerestory Windows , Isi Marked Flush Door Shutters , Polishing In High Gloss Matt Finish Melamine , Bright Finished Brass Hanging Type Floor Door Stopper , False Ceiling With Cove And Design At All Height , Providing And Applying White Cement Based Putty , Wall Painting With Acrylic Emulsion Paint , 2Mm Thick Pvc Mat Finished On Floor Of Approved Design , Sitc Of Vertical Blinds , Electrical Works , Wiring For Light Point Etc , Wiring For Circuit , Supplying And Fixing Following Modular Switch Etc , Supplying And Fixing Following Modular Switch Socket , Supplying And Fixing Following Modular Switchs , Supplying And Fixing Modules , Supplying And Fixing Following Way , Supplying And Fixing Miniature Circuit Breaker , Miniature Circuit Breaker Suitable For Inductive Load , Supplying And Fixing Single Pole Blanking Plate , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit , Supplying And Fixing Suitable Size Gi Box Wih Modular Plate , Frls Pvc Insulated Copper Conductor , Frls Pvc Insulated Copper Conductor 2 , Frls Pvc Insulated Copper Conductor3 , Frls Pvc Insulated Copper Conductor,4 , 3X2.5 Mm Flexible Wire For Connection , Wiring For Group Controlled , Led 2X2 Luminaire 36W , Recess Mounted Led Downlighter Total Quantity : 5469
Contract Date: Ref. Documents Contract Value : ₹ 1.11 Crore
Government Departments No of Bidders 3
Kerala View Result →
Uttar Pradesh View Result →
8.
Water Resources and Irrigation #11342285 AOC
Amrut-Supply, Erecting And Commissioning Of Various Pump Sets, Other Necessary Equipment For 107 Mld Sewerage Treatment Plant At Muttathara-Supply, Erecting And Commissioning Of Various Pump Sets, Other Necessary Equipments For 107 Mld Sewerage Treatment Plant At Muttathara-Sewerage Work- 1 SUPPLY, ERECTING AND COMMISSIONING OF PUMP SETS 2 OD149149/2023-2024:Supply, Erecting and Commissioning of 75 HP non clog pump set for RAS (Head – Up to 20 M) 3 OD149154/2023-2024:Supply, Erection and Commissioning of 5 HP non clog pump set for WAS (Total Head :14 M ) 4 OD149153/2023-2024:Supply, Erecting and Commissioning of 5 HP centrifugal dewatering pump set for RAS 5 OD17699/2025-2026:Supply, Erecting and Commissioning of80 HP Submersible pump set for inlet(Head : Up to 20 M) 6 OD18102/2025-2026:Supply, installation, and commissioning of minimum 100 LPH RO water purifier of standard make with 304-grade stainless steel skid and housing, comprising multi-stage purification system including pre-filter, sediment filter, activated carbon filter, RO membrane, UV disinfection unit, auto-flush system, and mineral cartridge; suitable for continuous commercial use and delivering safe, high-quality drinking water. 7 OD18758/2025-2026:Supply of 10 HP portable submersible sludge pump, 3-phase, suitable for handling slurry and sewage, maximum head up to 20 meters, solid handling capacity up to 50 mm, abrasion-resistant impeller, thermal protection, 15 m power cable, and 30 meters of heavy-duty discharge hose (100 mm dia) with quick couplings. 8 Supply and installation soft starter and motorized chain pulley 9 OD149170/2023-2024:Supply of motorized chain pulley block with 3-ton lifting capacity and 10-meter lift height, featuring electric motorized operation with electromagnetic or disc brake system, pendant control for easy operation, limit switches for safety, and overload protection, conforming to IS/ISO standards. 10 OD16970/2025-2026:Supply and installation of soft starter for MCC unit ( For 60 HP motor XS4000,115A,M200-525VACC110/ 220VAC), MNX140 3P 240V CONTACTOR and SEMI CONDUCTOR FUSE 170M3015 11 OD18097/2025-2026:Supplying, fixing, and testing 50W LED hanging type well glass light, weatherproof (IP65) 12 OD18264/2025-2026:Supply and installation of 10-meter hot-dip galvanized double-arm octagonal street light pole with 2×120W LED luminaires, including internal wiring, weatherproof junction box, connections, and earthing. Complete with foundation bolts and RCC pedestal. Includes supply, erection, and commissioning 13 Installation of CCTV camera 14 OD16801/2025-2026:Supplying & fixing HIKVISION 5 MP Varifocal IP Bullet Camera CAMERA 15 OD16892/2025-2026:Supplying, fixing and commissioning 4MP IP DOME CAMERA 16 OD16891/2025-2026:Supplying, fixing and commissioning HIKVISION 4MP IP BULLET CAMERA 40M 17 OD16890/2025-2026:Supplying, fixing and commissioning HIKVISION 32CH NVR 18 OD16889/2025-2026:Supplying, fixing and commissioning 8 PORT POE SWITCH 19 OD16888/2025-2026:Supplying & fixing 6U RACK & ACCESSORIES 20 OD16887/2025-2026:Supplying & fixing 9U RACK& ACCESSORIES 21 OD16886/2025-2026:Supplying & fixing CAMERA BOX 22 OD16885/2025-2026:Supplying & fixing CAT6 CABLE & PIPING (including excavation) 23 OD16884/2025-2026: Supplying and fixing pole with all accessories. 24 OD16920/2025-2026:Supplying and fixing 55-inch, 4K, LED, Smart TV (Samsung/LG/Sony) 25 OD16919/2025-2026:Supplying & fixing RECEIVER & TRANSMITTER UNIT 26 OD16918/2025-2026:Supplying & fixing L & T EXTENSION 5MTR 27 OD16917/2025-2026:Supplying & fixing 5 PORT GIGABYTE SWITCH 28 OD16916/2025-2026:Supplying & fixing HDMI CABLE 3MTR 29 OD16915/2025-2026:Supplying & fixing RACK & PIPE ACCESSORIES, 30 OD16914/2025-2026:INSTALLATION CHARGE FOR CAMERA& NVR 31 OD16913/2025-2026:Supplying & installation of rack 32 New Road formation: Tarring inside STP compound 33 3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m 34 4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method 35 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 36 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. 37 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 38 OD18679/2025-2026:Providing 40mm premixed chipping carpet over BT surface with departmental broken stones after thoroughly cleaning the base with wire brushes, brooms and applying a priming coat of hot bitumen @2.50Kg/10m2 and spreading the hot premix of 0.32m3 of 24mm, 0.22m3 of 12mm departmental metal mixed with 22.08Kg of bitumen per 10m2, rolling to dense surface, then spreading the seal coat comprising of 0.09m3 of 6mm metal mixed with 8.64kg of bitumen per 10m2 and rolling again including cost of bitumen, fuel, hire charges machineries etc. complete excluding the cost of 24mm ,12mm ,6mm metal(Total usage of bitumen 33.22 Kg per 10m2) (I.R.C 3.4.2) 39 OD18716/2025-2026:Supplying and stacking 24mm hard blue granite broken stone in standard heaps-for measurement(IRC 3.2. 1.a) 40 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 41 55.3:Supplying and stacking 6mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 42 Infrastructure Improvement Works at STP 43 OD17712/2025-2026:Supply and installation of UV-resistant HDPE with 12mm mesh ( 2meter height) for durability. Support poles are galvanized iron pipes (2-inch dia, 6 ft height) for stability. Stainless steel clamps & UV-resistant plastic ties ensure secure fitting. Concrete footing with excavation and earthwork provides pole stability. Skilled labor ensures proper installation 44 OD17711/2025-2026:Supply and spray a non-toxic, bio-friendly herbicide or a selective herbicide, with an application rate of 5 to 10 liters per hectare, ensuring effective weed control over an area of 1 hectare. 45 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 46 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 47 4.2.5:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) 48 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 49 5.22.4:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars 50 OD17710/2025-2026:Supply & installation of high-quality polyester sun control film with UV-blocking, heat resistance (99% UV, 60% heat rejection), 2–4 mil thickness, bubble-free installation, and 5-year warranty. 51 OD17709/2025-2026:Fire extinguishers (10L dry powder and 4.5kg CO₂) shall be installed as per IS: 2190 with inspection cards. Fire buckets with MS stands, safety posters, and caution notices in Malayalam and English shall be provided for compliance. 52 Providing roofing for DG, Inlet outdoor panels and mechanical screener 53 100.98.1009:Engaging Fitter ( grade 1). 54 15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 55 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 56 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 57 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 58 50.12.1.1:Providing & fixing PVC corrugated roofing sheets of good quality up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8 mm dia G. I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 59 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns 60 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) 61 Replacement of leaking flanged pipes inside the inlet well 62 OD17790/2025-2026:Supply, conveyance, and fixing of 300mm double flanged DI K9 pipe, including scaffolding, fabrication if required (cutting, flange welding), and providing necessary fittings, nuts, bolts, rubber gaskets, and insertion rubber sheets for proper and safe installation at site. 63 OD17835/2025-2026:Dismantling existing 300 mm DI pipes carefully using crane/manual handling with all necessary safety measures, and stacking the removed materials within 50 meters as directed by the Engineer-in-Charge 64 Provision forEntry of Trucks from Rear Side of STP 65 15.7.1:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In mud mortar 66 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil 67 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 68 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 69 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 70 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 71 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 72 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 73 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 74 13.82.1:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.One coat 75 10.26.3:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes 76 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work 77 Security room (4m x 3m) at back entrance of STP 78 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 79 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 80 50.6.1.1:Solid block masonry using pre cast solid blocks ( factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part 1 of 1979 for foundation and plinth with thickness 20 cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 81 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 82 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 83 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. 84 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). 85 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 86 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 87 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 88 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 89 OD17944/2025-2026:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including MS grill with suitable spacing and ISI marked M.S pressed butt hinges bright finished of required size with necessary locking arrangements. 90 OD17947/2025-2026:Electrical work including internal lighting, fan, switches, DB, concealed wiring, and one external LED light with pole/bracket for night visibility, complete with connections, fittings, and testing as per direction of Engineer-in-Charge. 91 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
Contract Date: Jun 23, 2026 Contract Value : ₹ 2.52 Crore
Local Bodies No of Bidders 1
Kerala View Result →
9.
Defence #11316669 AOC
Bids Are invited for Drone Kit Air Frame - 10 Inch High-Strength Carbon Composite Frame Featuring Precision Aerodynamic Cuts For Reduced Drag And Improved Stability. , Propellers - Dimension 10X5x3, Reinforced Nylon Propellers Infused With Carbon Fiber For Enhanced Rigidity And Thrust Efficiency. Supplied As Matched Clockwise (Cw) And Counter-Clockwise (Ccw) Pairs, Designed For Durability And Sustained High-Rpm Operation. , Bldc Motors - High Efficiency Bldc Motors Rated Below 950 Kv, Capable Of Delivering Up To 1650 W Maximum Power With Peak Thrust Approximately 3.1 Kg Per Motor. Suitable For Fpv Endurance, Long Range, And Load Bearing Applications. Motors Are Frame Mounted With Wired Interfaces To The Flight Controller Via Escs. , Battery Pack - High Capacity 6S 2P Li Ion Battery With Nominal Capacity Of 10,000 Mah, Supporting Rapid Discharge And Recharge Cycles. Designed To Deliver Approximately 40 Minutes Endurance Without Payload And 30 Minutes Under Operational Load, Depending On Mission Profile. , Flight Controller - Advanced H Series 32 Bit Flight Controller Based On A 480 Mhz Class Mcu, Integrating Gyroscope, Accelerometer, Barometer And Compass Sensors. Compatible With Gps Modules, Multi Camera Inputs, Telemetry Radios, Vtx, Servo Systems, And 4 In 1 Escs Rated 60A. Power Input And Is Fully Compatible With Mission Planner Gc. , Electronic Speed Controller - High Current 4 In 1 Esc With Continuous Current Handling Capability Of 60A, Optimized For Driving Four Bldc Motors In The 900 Kv Class Or Above. Designed For Thermal Stability And Sustained Operation Under High Load. , Transmitter - Mkii Express Lrs Edge Tx Transmitter , Elrs Receiver - Compact, High Performance 2.4 Ghz Express Lrs Nano Receiver Featuring True Antenna Diversity Via Dual T Antennas 65 Mm. Based On Esp Class Mcu And Sx128x Rf Chipset With Integrated Tcxo For Frequency Stability Across Temperature Variations. Incorporates Lna Pa Architecture Enabling Telemetry Output Up To 100 Mw While Maintaining Ultra Low Latency And High Refresh Rates. , Elrs Antenna - Dual Long-Range Telemetry Antennas Designed To Support Minimum 5 Km Control And Telemetry Range, Optimized For Stable Signal Performance In Fpv Environments. , Gps - Nano Form Factor Gps Module Powered At 5V Dc, Capable Of Tracking Up To 50 Satellites For Precise Positional Acquisition. Supports Low Hdop Values 0.9 Or Better And Full Compatibility With The Flight Controller For Autonomous Navigation And Return To Home Functions. , Vtx With Camera 4K - Ultra Long Range 5.8 Ghz Analog Vtx Capable Of Delivering Up To 3000 Mw Maximum Output Power. Supports 80 Channels Across Extended 4.9 To 5.8 Ghz Bands And Machined Aluminum Enclosure With Active Or Passive Cooling To Prevent Thermal Throttling. Operates Over Wide Input Voltage Range 7 To 36 V And Supports Irc Tr Smart Audio Protocols, Mmcx Antenna Interface, And Onboard Audio Pickup. , Remote Controller - Express Lrs Enabled Radio Controller With Integrated 1 W Rf Output, Supporting 5 Km Range. Features Built In Wi Fi, Backpack Module Support, And 16 Control Channels For Multi System Operation. Equipped With High Precision Hall Effect Gimbals, Multi Position Switches, A Monochrome Lcd, Standard Jr Module Bay, Cnc Machined Controls, And Adjustable Antenna Assembly. , Fpv Goggles - Digital Fpv Headset Featuring 5 Inch Lcd Display, Integrated 5.8 Ghz Diversity Receiver, And Built In Dvr Capable Of Recording Resolution To Microsd. Lightweight 375 G, Adjustable Head And Rechargeable Battery 2 Hours Runtime. Supports Dual Antenna Configuration Enabling 5 Km Video Reception. , Dropping Mechanism - Payload Upto 500 Gm (Mmhg Dropping) Total Quantity : 32
Contract Date: Ref. Documents Contract Value : ₹ 1.00 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 11
Uttar Pradesh View Result →
10.
Petroleum and Natural Gas #11310214 AOC
Bids Are invited for Position Transmitter Spares Total Quantity : 1
Contract Date: Ref. Documents Contract Value : ₹ 11.01 Lakh
Boards / Undertakings / PSU No of Bidders 1
Gujarat View Result →
11.
Banking and Finance #11279179 AOC
Bids Are Invited For Ifp 98’’Inch, 4K (3840 X 2160P) Resolution, 8Gb / 128Gb, Brightness – 450 Nits, Hdmi In X 3, Vga In X 1, Spdif X 1, Hdmi Out X 1, Usb Type-C X 1, Usb 2.0 X 1, Usb 3.0 X 4, Usb Type B X 2, Audio In X 1, Audio Out X 1, Hdmi Out X 1, Wi-Fi, Bluetooth 4K 12X Optical Zoom Ai Ptz Camera Resolution – 4K (Uhd), 12X Optical Zoom, , Field Of View: 71 Degree, Auto Brightness Adjustment, Pan : + / - 170 Degree, Tilt - 30 To 30 Degree, 255 Preset Position, Support H.264/H.265, Control Mode Wall Mount Speaker With All Necessary Power Accessories: 2-Way Bass-Reflex Type With Surface Mount Design, 5.25 Cone Driver For Low Frequency And 0.75 Soft Dome Tweeter For High Frequency. 30W/15W/7.5W In 100V Line; 30W/15W/7.5W/3.8W In 70V Line Power Amplifier Having Minimum Technical Specifications: Class-D Circuit And Provide Two Channels Of Amplification With Both Channels Driven Shall Be A 300W Per Channel With A 2 Ohm Load, 500W Per Channel With A 4 Ohm Load, 300W With An 8 Ohm Load At 1Khz Non-Clip 20Msec Burst 220-240V, 50/60Hz Line, Total Harmonic Smart Mixer Digital Minimum Technical Specifications: O Minimum Of 6 Mic/Line Inputs And 1 Unbalanced Stereo Input, 2 Balanced Outputs And 1 Unbalanced Stereo Output, Usb Audio Input/Output Digital Smart Mixer, Builtin Smartmixer With Gain Sharing Or Gate Modes.Built-In 4-Band Eq And Compressor, Eight 8-Band Feedback Suppressors, Built-In 12-Band Peq, Compressor, And Limiter, S/N Ratio 90 Db Or Higher, Dynamic Range 110 Db Or Higher, Maximum Gain 64 Db. Front Panel Configuration For Basic Settings. Web Remote For Advanced Settings Via Computer. Product Datasheet Should Be Available On Oem Website, Oem Maf Required. Dual Channel Wireless Microphone System, Series Iv 2.4Ghz Digital Transmission, 128-Bit Encryption With Charging Case,200M (Line Of Sight) Transmission Range, Up To 7 Hours Operating Time With Charging Case Wireless Handheld Microphone : Wireless Handheld Microphone System With Handheld Transmitter & Receiver, Power Supply, Batteries, Diversity Receiver And Up To 10 Compatible Channels In A Stable Uhf Band, Automatic Synchronization Make Setup Easy 15U Audio Rack With Supporting Hardware And Wheels With Necessary Power Set Of Cable Usb, Hdmi & Speaker Cables,Mounting Brackets Delivery,Installation,Testing & Programming Charges Total Quantity : 14
Contract Date: Ref. Documents Contract Value : ₹ 9.37 Lakh
Government Departments No of Bidders 3
Telangana View Result →
12.
Public Administrative Department #11258632 AOC
Tender For Providing And Fixing Of Spares For Ht, Lt, Apfc, Starters, Other Panels And Repairing Of Various Equipment And Electrical Installation For Gangapur Dam Pumping Station, Booster Pumping And Various Tp Of Nmc.-1 P/F digital ammeter for measuring current 2 P/F digital voltmeter for measuring voltage 3 P/F multifunction meter 4 P/F selector switches for voltmeter & ammeter 5 P/F light emitting diode type indicator 6 P/F switch disconnector fuse (SDF) a 100A. b 200A. c 300A. d 400A. e 630A. f 800A. 7 P/F moulded case circuit breaker (MCCB) a Up to 100A. b 200A. c 250A. d 315/400A. e 600 / 630A. f 800A. 8 P/F MCB a 6A to 32A b 40A to 63A. c P/F One way distribution board suitable for MCB 9 P/F Busbar chamber with triple pole neutral aluminium bus bar a 100A. b 200A. c 300A. d 400A. e 630A. f 800A. 10 P/F DOL starter a Up to 7.5HP. b Up to 10HP. 11 P/F street light bracket complete 12 P/F FRP box on pole/wall complete a 150mm x 125mm x 100mm, 2.7 mm thick b 250mm x 200mm x100 mm, 2.7 mm thick c 300mm x 200mm x125 mm, 2.7 mm thick 13 P/F LED 22W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete 14 Providing and filling Transformer oil 15 Point wiring in PVC trunking (casing-capping) with (2+1E) copper wire, modular type switch, earthing and required accessories 16 Point wiring for independent plug in PVC trunking (casing capping) with (2+1E )FRLSH grade copper wire, modular type switch, earthing and required accessories 17 P/F mains with 2 X 2.5sq.mm 1.1KV grade copper PVC stranded/solid wire complete (2 core, 71+36(1 core earthing)=107/- ) 18 Supplying and erecting PVC trunking (PVC casingn- capping) of size 25mm with accessories on wall/ceiling 19 P/F half round 15cm dia RCC hume pipe with necessary back filling etc complete 20 Providing and spreading stone metal 25mm size for 100mm depth above the ground level. 21 P/F three phase heavy duty power capacitors in suitable banks with voltage rating 440V, 50Hz 22 Providing and laying Aluminium conductor 3.5 core XLPE/PVC armoured 1.1KV grade cable a 25sq.mm b 35sq.mm c 50sq.mm d 70sq.mm e 95sq.mm f 120sq.mm g 150sq.mm h 185sq.mm i 240sq.mm j 300sq.mm k 400sq.mm 23 Providing and laying Aluminium conductor 1 core XLPE/PVC armoured 1.1KV grade cable a 1 Core, 630sq.mm b 1 Core, 800sq.mm c 1 Core, 1000sq.mm 24 Providing and laying Aluminium conductor 4 core XLPE/PVC armoured 1.1KV grade cable a 4sq.mm b 6sq.mm c 10sq.mm d 16sq.mm 25 Providing and laying Aluminium conductor 2 core XLPE/PVC armoured 1.1KV grade cable a 4sq.mm b 6sq.mm c 10sq.mm 26 Providing and laying copper conductor 2.5sq.mm XLPE/PVC armoured 1.1KV grade cable a 2 Core, 2.5sq.mm b 3 Core, 2.5sq.mm 27 P/L flexible PVC sheathed submersible type copper cable. a 4 core 2.5 sq mm b 4 core 4 sq mm c 4 core 6 sq mm d 4 core 10 sq mm e 4 core 16 sq mm f 4 core 25 sq mm g 4 core 35 sq mm 28 Providing and laying Alu. conductor 3 core, XLPE /PVC 3.3KV armoured cable a 70sq.mm b 95sq.mm c 120sq.mm d 150sq.mm e 185sq.mm f 240sq.mm g 300sq.mm h 400sq.mm 29 P/F heat shrinkable outdoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 30 P/F Heat shrinkable indoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 31 P/F Heat shrinkable straight through joint kit for 3 core, 3.3Kv (E) XLPE HT cable etc complete a 70-120sq.mm b 150-185sq.mm c 240-400sq.mm 32 Providing and laying Aluminium conductor 3 core, XLPE/PVC 11KV armoured cable a 95sq.mm b 120sq.mm c 150sq.mm d 185sq.mm e 240sq.mm f 300sq.mm 33 P/F heat shrinkable outdoor termination kit for 11Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-95sq.mm b 120-185sq.mm c 240-300sq.mm d 400sq.mm 34 P/F Heat shrinkable indoor termination kit for 11Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a 70-95sq.mm b 120-185sq.mm c 240-300sq.mm d 400sq.mm 35 P/F Heat shrinkable straight through joint kit for 3 core, 11Kv (E) XLPE HT cable etc complete a 70-95sq.mm b 120-185sq.mm c 240-400sq.mm 36 Providing and laying Alu. conductor 3 core, XLPE / PVC 33KV armoured cable a 95sq.mm b 120sq.mm c 150sq.mm d 185sq.mm e 240sq.mm f 300sq.mm 37 P/F heat shrinkable outdoor termination kit for 33Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 38 P/F Heat shrinkable indoor termination kit for 33Kv (E) XLPE HT cable erected and connected to the supply with insulated sleeves,additional lugs & nut bolts for all core for 3 core cable with HT testing at site etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 39 P/F Heat shrinkable straight through joint kit for 3 core, 33Kv (E) XLPE HT cable etc complete a up to 70sq.mm b 95-150sq.mm c 185-240sq.mm d 300-400sq.mm 40 P/F Heat shrinkable straight through joint kit for flexible PVC sheathed submersible type copper cable. a 4 core 2.5 sq mm b 4 core 4 sq mm c 4 core 6 sq mm d 4 core 10 sq mm e 4 core 16 sq mm f 4 core 25 sq mm g 4 core 35 sq mm 41 P/F HT capacitor suitable for 3.3KV in suitable banking 42 Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete 43 Powder coating in siemens gray colour 44 Making Iron work for fabrication with bending, cutting, drilling and welding complete 45 Epoxy painting on both side of approved colour shade of provided iron work 46 P/F GI strip of suitable size 47 P/F M.S. stand for fire bucket 48 P/F Wall hook for fire bucket 49 P/F G.I fire bucket 9Lit 50 P/F Instruction chart 51 Pair of rubber hand gloves 52 Supplying and erecting fire extenguisher 4.5Kg 53 P/F High voltage insulating Electromat confirming to IS 15652 :2006 a Suitable for 3.3KV. b Suitable for 11KV. c Suitable for 33KV. 54 Providing and laying double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete a 50 mm b 75 mm c 90 mm d 120 mm e 160 mm f 175 mm g 200 mm 55 P/F Flood light LED fitting for street light a 50W b 70W c 100W d 120W e 155W f 195W 56 P/F aluminium PVC unarmoured cable 2 X 6sq.mm of 1.1kv grade 57 P/F mini feeder pillar triple pole with 200A MCCB as incomer etc complete 58 P/F mini feeder pillar triple pole with 300A MCCB as incomer etc complete 59 P/F fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work complete 60 P/F double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire meshcomplete 61 P/F 50 x 50 x 6mm angle iron corner support 0.5m away from fence support fixed etc. 62 Providing and fixing ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps 63 P/F analog Ammeter for measuring current 64 P/F analog Voltmeter for measuring voltage 65 Providing and laying XLPE armroured cable for 3.3KV with ISI mark 1 core 630 sq.mm. stranded aluminium wire in an approved manner. 66 P/F heat shrinkable outdoor termination kit for 3.3Kv (E) XLPE HT cable erected and connected the supply with insulated sleeves,additional lugs nut bolts for 1 x 630 sqmm cable with HT testing site etc complete 67 P/F programmable logic controller for Thyristor logic KPOPF – 406 – T. 68 P/F Injector module for Thyristor logic KPIPF 406 – T. 69 P/F Zero switching module for Thyristor logic KPZPF – 406 – T. 70 P/F current generator 440V, 50Hz, for final compensation of real time PFC after basic compensastion using programmable logic controller, relay module, ZCS control thyristor units with its software, hardware, power and control cabling etc complete. a Up to 42A b 42A to 56A c 70A to 105A. d 112A to 140A 71 P/F ROM-51 memory controller with accessories along with routine software program for Thyristor logic. 72 P/F ROM-51 memory controller with accessories along with routine software program for zero switching logic. 73 P/F voltage transformer with 11V, 18-0-18V, 22V, 8V secondary. 74 P/F output module for soft starter-KPOSS-306. 75 P/F proportional Integral card with operational amplifier KPISS-306. 76 P/F analog to Digital converter ATD-09. 77 P/F MCR-31 Main controller with accessories. 78 P/F 7-Segment common anode display controller DSP-79 with accessories. 79 P/F RAM-64 memory unit with accessories. 80 P/F ROM-SS-64 memory unit with accessories along with routine software program. 81 P/F ROM-SS-51 memory unit with accessories along with routine software program 82 P/F flat band cable set 26pin. 83 P/F flat band cable set 20pin. 84 P/F glass type relay O/E/N RL-24. 85 P/F 2A fuse box of EI for power supply (20Nos). 86 P/F 2A glass fuse base open type FBO. 87 P/F tertiary current transformer 88 P/F PLA relay 24D 1NO RDRL-24. 89 P/F SMPS ripple filter choke 5V DC, 1500mA. 90 P/F 24VDC, 10A Electromechanical relay PLA and snubber. 91 P/F voltage transformer with O/P 6.8V, 11.5V, 22.5V Delta to star. 92 P/F programmable logic controller module for contactor logic KPOPF – 406 – C. 93 P/F injector module for contactor logic KPIPF – 406 – C. 94 P/F relay module for contactor logic KPRLPF – 406 – C. 95 P/F ROM-51 memory controller with accessories along with routine software program for contactor logic. 96 P/F thyristor back to back connected suitable for following starters and Capacitor banks. a 75HP. b 120HP. c 215HP. d 300HP. e 10KVAR f 15KVAR g 20KVAR h 25KVAR i 30KVAR 97 P/F inductor suitable for following Capacitor banks. a 10KVAR b 15KVAR c 20KVAR d 25KVAR e 50KVAR 98 P/F electrical contactors. a 32A. b 40A. c 70A. d 110A. e 200A. f 300A. g 400A. h 650A 99 P/F main contact kit for power contactor. a 32A. b 40A. c 70A. d 110A. e 200A. f 300A. g 400A. h 650A 100 P/F HRC fuses. a 40A. b 50A. c 63A. d 100A. e 125A. f 160A. g 200A. h 250A. i 315A. j 400A. k 630A. l 800A. 101 P/F fuse bridges. a Up to 32A. b 63A. c 160A. d 250A. e 800A. 102 P/F change over switches. a 63A. b 125A. c 200A. d 250A. e 315A. f 400A. g 630A. h 800A. i 1000A. 103 P/F timers. a ET-100. b Star-Delta. 104 P/F FASD starter. a ML2 b ML3 c ML4 105 P/F energy efficient street light fitting using 36W CFL lamps complete. 106 P/F 11KV HT fusegear for fuse switch unit of CGLucy 107 Actuator control unit. a P/F forward / reverse contactor b P/F over load relay. c P/F contact kit 108 Providing and laying copper conductor 12 core 2.5sq.mm XLPE/PVC armoured 1.1KV grade cable 109 P/F electronic control unit suitable for up to 175HP, control Supply 240V AC, Power Suply 415V AC, with all test and trials complete. 110 P/F electronic control unit suitable for up to 300HP, control Supply 240V AC, Power Suply 415V AC, with all test and trials complete. 111 P/F limit Switch for gate 112 P/F 10 Turns Preset. 113 P/F panel accessories such as push button with indicators, NO/NC contact, emergency stop push button, copper lug for control cable, gasket, etc complete. 114 P/F C I pipe type earthing etc complete. 115 P/F 230V, 2 C/O panel mounted relay. 116 P/F single phasing preventer relay 117 P/F single phase, under voltage, over voltage protection relay. 118 P/F oil temperature sensing relay 119 P/F winding protection relay 120 P/F reverse rotation sensing relay 121 P/F Motor protection relay for LT motor 122 P/F Control transformer with protection circuit 123 P/F PVC type earthing chambers with accessories for earthing. 124 Power contactor coil LC-1F 330 125 P/F sequence controller 126 Providing, fixing termination box for submersible pump to ATS starter with bus bar, terminations etc complete 127 Providing and laying 95sq.mm copper conductor 1 core flexible PVC unarmoured 1.1KV grade cable 128 Energy meter panel a P/F Energy meter single phase 230V, 50Hz, 10A supply complete b P/F Energy meter 3 Phase, 4 wire, 50Hz, 100A supply complete c P/F L.T. Current transformer of suitable ratio d Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete e Powder coating in siemens gray colour f Control wiring using copper wire, ferrule, lugs, tie saddle, spiral etc complete. g Panel accessories such as hardware, gasket, insulator, panel knob, panel lock for each feeder complete . h Dismantling of old meter panel by disconnecting connections of all cables, etc complete i Installation of new meter panel by fixing meter box, making incoming and out going connection etc complete. 129 Starter Panel a P/F digital ammeter for measuring current b P/F digital voltmeter for measuring voltage c P/F selector switches for voltmeter & ammeter d P/F light emitting diode type indicator e P/F L.T. Current transformer of suitable ratio f Providing and fixing Main Incommer 63A moulded case circuit breaker g P/F 100A Busbar chamber with triple pole neutral aluminium bus bar h Making fabrication work using 16 gauge metal sheet with bending, cutting, drilling and welding complete i Making Iron work for fabrication with bending, cutting, drilling and welding complete j Powder coating in siemens gray colour k P/F DOL ML 1.5 starter l P/F FASD ML2 starter m P/F FASD ML3 starter n P/F FASD ML4 starter o P/F Over load relay. p Control wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete. q Local/remote wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete. r Panel accessories such as hardware, gasket, insulator, panel knob, panel lock, bus bar terminals, etc complete. s Dismantling of old starter panel by disconnecting connections of all cables, etc completet Installation of new starter panel by fixing starter panel, making incoming and out going connection etc complete. u Terminations main outgoing cables by using lugs glands etc complete. 130 LT Panel, Changeover Panel, Distrubution Panel, Feeder Panel a Power wiring up to 63A feeder using copper wire, lugs, tie saddle, spiral etc complete. b Control wiring for metering using copper wire, ferrule, lugs, tie saddle, spiral etc complete. c Panel accessories such as hardware, gasket, insulator, backlite, panel knob, panel lock, push button with indicators, heavy duty connectors earthing arrangement, etc complete for following feeders i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A d Dismantling, disconnecting connections of all cables, shifting old panel in godown etc complete of following capacity. i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A e Installation of panel at desired place including loading unloading and transportation of following capacity i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A f Making new terminations of main incoming/outgoing cables, etc complete for following feeders. i Up to 100A ii 100A to 250A iii 250A to 400A iv 400A to 800A g Interlocking, forward/reverse, timing and control circuit/star delta circuit etc control wiring using copper wire, ferrule, lugs, tie saddle, spiral, etc complete for one feeder. 131 P/F 3 phase street light timer controller of 60 A per phase rating with in-built relay, timer, protections, display 132 Providing, fixing and testing of HT TOD meter of appropriate class with required accessories along with co ordnation with MSEDCL complete. 133 Providing, fixing and testing of LT TOD meter of appropriate class with required accessories along with co ordnation with MSEDCL complete. 134 P/F Motor protection circuit breaker 135 P/F 3 Phase heavy duty industrial socket. 136 P/F 1 Phase heavy duty industrial socket. 137 P/F and erecting 6mm Polycarbonate multiwall ultravoilet protected sheet for roofing over fabricated steel structure as per detail design, including fixing the Polycarbonate sheet with alluminium angle & Flat anodized & dyed as per approved shade including all water proofing materials, nuts bolts hardware, labour & square pipe, angles, fabrication complete including all hardware etc. as required . (only actual area of polycarborted sheet to be considered for measurements) 138 Making isolation circuit using AB switch / D.O. Set for single pole & converting the cutpoint by dismantling with nessasary material, jumping, earthing along with arrangement of shutdown etc. complete. 139 P/F diesel filling pump for filling diesel in dg sets from store tanks etc complete. 140 P/F meter box for single phase energy meter complete. 141 P/F meter box for three phase energy meter with compartment for mccb/mcb etc complete. 142 P/F of spares for DG control panel a Flush mounted panel meter three phase four wire for frequency etc. b 12V/80AH Battery c 12V/100AH Battery d 12V/150AH Battery e 12 V/180AH Battery f 12V/200AH Battery g Battery water h EPU unit i AVR j AMF Controller k Voltmeter DC l Ammeter DC m Push button n ESR D1 o 12V battery charger p 24V battery charger q Overload relay r Relay s Electronic Timer t Hooter u Connector 143 Reconditioning of transformer a Inspection of distribution transformer on HV and LV side b Dismantling the distribution Transformer from the plinth / foundation c Providing and filling Transformer oil d Painting of transformer using smoke gray paint complete e Providing and rewinding of copper material for HT coils f Heating of core and winding, including removing of moisture etc complete g Providing oil arresting sheet for low tension side of R Y B studs, 5mm thick properly fitted in the studs of transformer. h Providing oil arresting sheet for top cover of oil chamber, LT connection box, oil tank etc parts ,5mm thick properly fitted in the top cover and nut bolts of transformer i Providing R Y B stud bushings over the oil arresting sheet on the studs of transformer . j Reinsulation by high quality uniform covering throughout of 11KV windings using accessories complete k Reinsulation by high quality uniform covering throughout of 415V windings using accessories complete l Repairing and servicing of tap changer of transformer m Transformer oil filtration n Changing silica jel of breather and adding breather oil. o Loading, unloading and transportation of transformer. p Attendance, engineering charges for connection of HT/LT cables and giving satisfactory test & trials of transformer complete 144 P/F Analog input module AI 2xI, 4-wire transmitter (+/-20 mA /13 bits+sign, 4 mA to 20 mA/13 bits), standard 145 P/F Analog input module AI 4xI, 2wire- MU(4..20mA), standard 146 P/F Digital output module DO 8xDC24V/0.5A, supports isochrone mode 147 P/F Power module PM-E for electronic modules, 24 VDC, with diagnostics 148 P/F Digital input module DI 8xDC24V, supports isochrone mode 149 P/F IM151-8PN/DP central processing unit work memory 192KB; 0.06ms/1000 instructions; PROFINET connection; S7 communication (loadable FBs/FCs); PROFINET IO-Controller; supports RT/IRT; PROFINET interface and 3 ports; MRP; PROFINET CBA; PROFINET CBA-Proxy; transport protocol TCP/IP, 150 P/F Communication module with a serial interface (RS232, RS422 or RS485) and Modbus master log with 8 byte I/O interface 151 P/F Communication module with a serial interface (RS232, RS422 or RS485) and Modbus slave log with 8 byte I/O interface 152 P/F Programmable logic controller 1769 TW Digital input module 32 point. 153 P/F Programmable logic controller 1769 Analog input module 8C 0-10V 0-20 154 P/F Programmable logic controller 1769 Digital output module 32 point. 155 P/F Programmable logic controller 1769 Power unit. 156 P/F Programmable logic controller 1769 Compact I/O to DSl module. 157 P/F Programmable logic controller 1769CMPAC Logix processor ethernet 2MB 158 P/F Programmable logic controller 1969 Endcap right. 159 P/F Laser printer Spares for VCB 160 P/F closing coil assembly- 4VC49-110 161 P/F tripping coil assembly- 4VC49-106 162 P/F micro switch 163 P/F breaker auxiliary switch 164 P/F spring charging motor 165 P/F closing shaft with spring. 166 P/F tripping shaft with spring. 167 P/F charging handle assembly 168 P/F pinion gear assembly 169 P/F spur gear assembly 170 P/F bridge rectifier 171 P/F spring for tripping catch 172 P/F tripping catch assembly 173 P/F closing catch assembly 174 P/F driving rod assembly 175 P/F nut assembly 176 P/F cam shaft assembly 177 P/F vacuum interrupter Spares for VC 178 P/F closing coil assembly for VC 179 P/F tripping coil assembly for VC 180 P/F 2 Pole auxiliary switch 181 P/F micro switch 182 P/F bridge rectifier 183 P/F vacuum interrupter 184 P/F contact shroud assembly 185 P/F PDS assembly- 4VC19-0027/01 186 P/F shutter assembly- 3VB79-310/04 187 P/F 5 pole auxiliary switch- J309-022 HT Panel Spares 188 P/F moulded contact shrouds- 1VB79-0009/04 189 P/F shutter assembly- 3VB79-0087/02 190 P/F push button- green button with spring. 191 P/F push button- red button with spring. 192 P/F PDS assembly- with fixing nut bolt- 4VC19- 0027/03 193 P/F insulated stud assembly 194 P/F flexible jumper with fixing bolt- 3VC19-0009 195 P/F coupling 196 P/F bus conductor- upper- 4VC13-0002 197 P/F bus conductor- lower 198 P/F top cover for U barrier- 4VC19-0117/01 199 P/F 16 Pin plug with socket- 4VC46-0303 200 P/F PT fuse 201 P/F voltage transformer (PT) of suitable Ratio secondary 110VAC and suitable class: 202 P/F current transformer (CT) of suitable ratio secodary 5A and suitable class. 203 P/F TNC switch 204 P/F local remote switch 205 P/F PVC shroud- CT/PT/CR surg 206 P/F PVC shroud- 630A 207 P/F contact shroud for PT. 208 P/F rubber gasket for door 209 P/F bushing plate- VCB 210 P/F control fuse with assembly, 440V 211 P/F loose vacuum contactor [Electrically held] type JVE1-604. 212 P/F loose vacuum Contactor for soft starter MVC400D, 400Amp, 3.3KV, 2P, Control supply 220VDC, Solenoid type, with 3 economy resistance- CVC0004, 213 P/F electronic timer suitable in HT starter. 214 P/F Over current, Earth fault relay and short circuit protection relay and retrofitting if required. 215 P/F Under voltage/ Over voltage protection relay and retrofitting if required. 216 P/F Master trip relay and retrofitting if required. 217 P/F Trip circuit supervision relay and retrofitting required. 218 P/F auxillary relay for contact multification RE-300 Aux supply: 110V AC / DC 219 P/F auxiliary contactor for vaccum contactor operation 110VDC with resistor complete. 220 P/F limit switch for service & test position 2 Pole. 221 P/F tripping relay VAJH 3NO + 1NC, 110VDC 222 P/F selector switch for HT panel 223 P/F breaker operated switch 10 pole, 5NO + 5NC. 224 P/F power pack unit Input: 110V AC, Output: 110VDC 225 P/F On line UPS pure sine wave with standard features a 1KVA b 2KVA c 3KVA d 6KVA e 10KVA 226 P/F SMF battery a 12 V/17Ah -18Ah b 12 V/26Ah c 12 V/42Ah d 12 V/65Ah e 12 V/100Ah 227 P/F fixed resistor 1000 ohms. 228 P/F safety switch for VC HRC fuse P/F blow pole 1C/O 229 P/F connecting rods for safety switch 230 P/F safety switch for VC trunk Interlock 2 Pole NO + 1NC.231 P/F high voltage 3.6KV HBC fuse links for short circuit protection. 232 P/F and giving satisfactory test and trials of 3.3 KV 104Kvar Capacitor panel as per rate analysis. 233 P/F and giving satisfactory test and trials of 3.3 KV 208Kvar Capacitor panel as per rate analysis. 234 P/F MM30 type protection relay Machining and fabrication works for couplling of actuator and valve 235 P/F Universal joint 236 P/F Mounting bracket 237 P/F Flange 238 P/F Coupler 239 P/F Shaft coupler 240 P/F Additional shaft 241 P/F Fastener bolt, hardware, etc accessories 242 P/F 0.6mm GI sheet 243 P/F regular/ standard model Ceiling fan complete 244 P/F ISI mark modular type (two module) electronic step regulator for fan 245 P/F condenser 2.5 micro farad for ceiling fan 246 P/F anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. 247 P/F fan clamp of 30 x 5 mm. M.S. flat of required length and 10 mm. M.S. bolt and nuts erected with necessary hook of 10 mm. M.S. round bar and painted. 248 P/F fan hook of 10 mm. M.S. round bar grouted in RCC slab 249 P/F ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire 250 P/F heavy duty exhaust Fan 251 Refilling of fire extinguisher of by dismantling from site to workshop for refilling which includes removing of existing powder and cleaning the cylinder, delivery pipe , nozzle internally and refilling new powder complete with reinstalling properly at site 252 Dismantalling old rusted perforated type cable tray.253 P/F hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 100 mm width with necessary coupler plates and hardware in approved manner etc complete. 254 P/F, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity suitable to operate on 250V, 50 cycles, A.C.supply having 1 no of air handling unit hiwall / floor mounting type complete. 255 P/F, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete 256 P/Laying PVC insulated PVC round sheathed 2.5 sq.mm 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV 257 P/F copper pipe suitable for refrigeration system having size 12.7 mm complete. 258 P/F bracket for split type AC 259 P/F copper pipe suitable for refrigeration system having size 15.9 mm complete. 260 P/F Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 12 mm 261 P/F Elastomeric Nitrile rubber / foam tube type sleeves for over coating and insulating on provided copper pipes having sizes 16 mm 262 P/F rigid PVC pipe 20 mm dia.with PVC accessories for drain 263 Carrying out core cutting of size 3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. 264 Providing, Installation, Testing and commissioning of borewell type maintenance free chemical earthing comprising of Electrode of 80 mm diameter rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. 265 Providing, Installation, Testing and commissioning of borewell type maintenance free chemical earthing comprising of Electrode of 80 mm diameter rod of Length 1.5m along with 15 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. 266 Providing and making platform by making excavation for foundation, situ cement concrete of M-10, uncoursed rubble masonry of trap, rubble stone soling 15cm to 20dc thick including hand packing and compacting, situ cement concrete of M20 grade trap, steel bar rainforcement of various diameters for RCC work, sand faced plaster externally in cement mortar, etc complete 267 Providing hand drill Machine 268 Providing hand grinder 269 Providing Crimping tool up to 400sq.mm 270 Providing Insulator tester ( Megger ) cranking type having metal body of range 100 Volts 1000 Ohms 271 Providing fix spanner set 12 piece set 6 -32 mm 272 Providing Bi-hexagon Ring spanner 12 piece set 6 - 32 mm 273 Providing screw driver a Screw driver Engineering pattern 6 X 300 mm b Screw driver Engineering pattern 8 X 200 mm c Screw driver Engineering pattern 5 X 200 mm d Screw driver Engineering pattern 5 X 300 mm e Screw driver with green neon bulb line tester 3.6 X 60 mm 274 Providing Multimeter 275 Providing Tong Tester ( Clip on meter ) of range 0- 10-30-100-1000 Amps and 0-300-600 Volts 276 Providing Ball pen hammer with handle 800 gm 277 Providing Hack saw frame 300 mm size with heavy duty blade 278 Providing blower 279 Providing single phase welding machine 280 P/F fixing isolator suitable for 33KV capacity 281 Providing office regular with handle chair 282 Providing fabricated powder coated rack 283 Providing computer table 284 Providing 18 compartment steel clothes locker with powder coating, locking arrangement, etc complete. 285 Providing regular office wooden table 286 Providing wooden chair 287 Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8mm thick & Top in 2mm thick CRCA, Shutter to be mounted with the help of cuphinges, and adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns 288 Providing and fixing Openable Steel Storage of 750 x 450 x 1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish 289 Providing & Arrangemnt of High Back chair, Synchronized Mechanism with Multiple Locking, Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 290 P/F disc type insulator suitable for 33 KV line complete erected with suitable Hardware on provided cross arms as per IS. 291 P/F pin type insulator suitable for 33 KV line, complete erected with suitable hardware on provided cross arms. 292 P/F G.I. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, G.I. stay wire 7/8 SWG, G.I. stay rod 20 mm x 1.8 meter length and pole clamps duly erected in provided cement concrete foundation. 293 Providing and fixing Nut bolts and Sundries etc accessories 294 Making isolation circuit for all 3 phases and interlocking the same to provide 33KV output from 2 Nos of 33KV input feeders using accessories etc complete. 295 Dismantling the existing old 33KV circuits and all jumps, accessories, etc complete. 296 Providing and fixing safe shade ESE type lighting arrestor system complete with following details. a P/F safe shade ESE type lighting arrestor as per NFC17-102 (2011) UNE 211862011 standards, CPRI tested, area covered 107 Mtr, etc complete. b P/F GI mast 5mtr long wth base plate complete c P/F 6 Digit counter, etc complete d P/F accessories for lightning arrestor, etc complete. e P/F test link box etc complete. f Providing, laying and terminating single core 35sq.mm copper flexible cable for earthing 297 Providing and making overhead cablling works for clarifier bridge slipring a P/F slipring b Providing and laying copper conductor 1.5sq.mm X 4 core XLPE/PVC 1.1KV grade cable c P/F hardware, bobbin, anchor fastners, cork sheet etc accessories for slipring fixing works. d P/F GI wire of high purity of different sizes used for earthing. e P/F attachment to slipring for entering cable from top using GI pipes, coupling, flange, bend, by machining and threading the components so that cable will remain fix when clarifier is rotating. f Making arrangement using provided GI wire, bobbins to carry the provided cable overhead from filter to clarifier. g Making terminations for slipring main panel, clarifier panel, etc.Part B- Annual maintenance contract 1 Servicing and overhauling of APFC panels. A Servicing of APFC panel by making terminations of power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, tightening all connections, changing hardware, insulator, gasket, replacing provided blown fuses, fuse base, indicators and other parts as required in engineering manner for each bank complete as follows. a Control feeder for 1 to 5KVAR bank. b Control feeder for 5 to 10KVAR bank. c Control feeder for 10 to 20KVAR bank. d Control feeder for 20 to 30KVAR bank. e Control feeder for 30 to 50KVAR bank. B Servicing of main programmable logic controller injector module, ZCS module, by correcting dry solder, calibrations of three phase voltage, currents, all parameters, power supplies, tightening all connections, adjusting preset values to maintain unity power factor, checking transformer voltages, current ratios, checking of panel & cleaning of panel complete. 2 Servicing and overhauling of soft starters. Servicing of contactor by changing provided contact kits, coil, terminations, control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches, servicing of analog card, digital card, display card, correcting dry solder, calibrations of three phase voltage, currents, all parameters, power supplies, adjusting preset values, checking transformer voltages, current ratios, termination of incoming outgoing cables as required. Also tightening of connections, cleaning of panel complete. a 70 to 90HP. b 90 to 120HP. c 120 to 150HP. d 150 to 215HP. e 215 to 300HP. f 300 to 1000HP 3 Servicing and overhauling of starters. Servicing of contactor by changing provided contact kits, coil, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, push buttons, voltmeter, ammeter, selector switches checking oil level and top up, auto transformer links, termination of incoming outgoing cables as required. Also tightening of connections, setting of timers and cleaning of panel complete. a 3 to 7.5HP. b 7.5 to 12.5HP. c 12.5 to 20HP. d 20 to 30HP. e 30 to 50HP. f 50 to 70HP. g 70 to 90HP. h 90 to 120HP. i 120 to 150HP. j 150 to 215HP. k 215 to 300HP. 4 Servicing and overhauling of distribution panels. Servicing ,repairing of distribution panels by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, provided indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections of feeders of following capacity. a Up to 32A b 32A to 63A c 63A to 100A d 100A to 150A e 150A to 200A f 200A to 250A g 250A to 400A h 400A to 630A i 630A to 800A j 800A to 1000A k 1000A to 1250A l 1250A to 1600A 5 OCB to MCCB conversion. Dismantling output starter’s cable terminated to OCB, dismantling incoming and outgoing bus bar of OCB to main LT panel, dismantling OCB from main LT panel properly. Making iron frame for fitting of MCCB. Fitting of MCCB in main LT panel with proper hardware, covering the front open portion with 16SWG MS sheet with adjusting slot for MCCB handle. Terminating the R Y B connection of MCCB with main LT panel’s bus bar using appropriate rating of copper flexible cable and proper copper lugs. Reconnect the output’s starter cable to MCCB, taping all power connections, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches. Replacing indicators and other parts as required. Cleaning of panel, tightening of all connections. 6 Servicing and overhauling of actuator electrical control module. Servicing of actuator electrical control module by servicing of contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 7 Callibrating all presets/sensor for gate/screen with open/close and electronic indication system. Checking control wiring for remote and local operation, adjusting limit switches with proper close and open, giving satisfactory test and trials of remote and local system etc complete. 8 Servicing and overhauling of alum mixer control module. Servicing of alum mixer module by servicing of SFU, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 9 Servicing and overhauling of chlorine plant control module. Servicing of chlorine plant module by servicing of SFU, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 10 Servicing and overhauling of clarifier control module. Servicing of clarifier module by servicing of breaker, servicing contactor by changing provided contact kits, coil, checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Replacing blown fuses, fuse base, indicators and other parts as required. Cleaning of panel, tightening of all connections. 11 Servicing and overhauling of HT substation. a Servicing and overhauling of 4 pole structure, servicing air break switch by polishing contacts, applying jelly to contacts, alignment of AB switch, servicing and overhauling of D.O. set by polishing hansa and punja, applying jelly to all hansa and punja, changing fuse link tightening of connections, changing hardware, changing ACSR jumper links by properly lugging and binding using alkathene pipe. HT taping of connections, checking of insulators, insulation test of total installation and earth test of earthing pits. b Cleaning of substation area, painting of 4 pole structure , fencing and gate using aluminium paint and scraping old paint. Painting of transformers using AD gray paint and scraping old paint. 12 Servicing and overhauling of 33KV H.T. Substation at Gangapur Dam pumping station. a Servicing of air break switch by polishing contacts, applying jelly to contacts, alignment of AB switch, tightening connections, changing hardware, etc complete. b Painting of gantry structure for air break switch by cleaning all poles channels using aluminium paint 3 coats. c Servicing of D.O. set by polishing hansa and punja, applying jelly to hansa and punja, tightening connection, changing hardware and fuse wire, etc complete. d Painting of gantry structure for D.O set by cleaning all poles channels using aluminium paint 3 coats. e Servicing of PT by checking, lugging, tightening HT and earthing connections, checking, tightening secondary connections, measuring voltages at out put for main bus, bus-1 and bus-2. f Painting of gantry structure for main bus PT by cleaning all poles channels using aluminium paint 3 coats. g Painting of gantry structure for PT bus-1 and bus-2 by cleaning all poles channels using aluminium paint 3 coats. h Painting of PT for main bus, bus-1, bus-2 and MSEDCL by cleaning them and using smoke gray paint 3 coats. i Servicing of VCB by checking operating mechanism, alignment, applying jelly to various parts, control wiring, remote local operation, spring charging, insulation tests for main bus, bus-1 and bus-2. j Repairing servicing of control feeder panel for VCB/VC by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete. k Servicing of CT by checking, lugging, tightening HT and earthing connections, checking, tightening secondary connections, measuring currents at out put for main bus, bus-1, bus-2. l Painting of gantry structure for VCB and CT for main bus, bus-1 and bus2 by cleaning all poles channels using aluminium paint 3 coats. m Painting of VCB for main bus, bus-1 and bus-2 by cleaning them and using smoke gray paint 3 coats. n Painting of CT for main bus, bus-1, bus-2 and MSEDCL by cleaning them and using smoke gray paint 3 coats. o Painting of gantry structure for MSEDCL CTPT structure by cleaning all poles channels using aluminium paint 3 coats. p Painting of gantry structure for cut point by cleaning all poles channels using aluminium paint 3 coats. 16 Repairing of analog input module AI 2xI, 4-wire transmitter (+/-20 mA /13 bits+sign, 4 mA to mA/13 bits), standard 17 Repairing of analog input module AI 4xI, 2wire- MU(4..20mA), standard 18 Repairing of digital output module DO 8xDC24V/0.5A, supports isochrone mode 19 Repairing of power module PM-E for electronic modules, 24 VDC, with diagnostics 20 Repairing of digital input module DI 8xDC24V, supports isochrone mode 21 Repairing of IM151-8PN/DP central processing unit work memory 192KB; 0.06ms/1000 instructions; PROFINET connection; S7 communication (loadable FBs/FCs); PROFINET IO-Controller; supports RT/IRT; PROFINET interface and 3 ports; MRP; PROFINET CBA; PROFINET CBA-Proxy; transport protocol TCP/IP, 22 Repairing of Communication module with a serial interface (RS232, RS422 or RS485) and Modbus master log with 8 byte I/O interface 23 Repairing of Communication module with a serial interface (RS232, RS422 or RS485) and Modbus slave log with 8 byte I/O interface 24 Repairing of Programmable logic controller 1769 TW Digital input module 32 point. 25 Repairing of Programmable logic controller 1769 Analog input module 8C 0-10V 0-20 26 Repairing of Programmable logic controller 1769 Digital output module 32 point. 27 Repairing of Programmable logic controller 1769 Power unit. 28 Repairing of Programmable logic controller 1769 Compact I/O to DSl module. 29 Repairing of Programmable logic controller 1769CMPAC Logix processor ethernet 2MB 30 Repairing of Programmable logic controller 1969 Endcap right. 31 Inhouse Programmable logic controller software devlopment charges. 32 On site commissioning of hardware, testing the complete system, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of control cables as required. Cleaning of panel, tightening of all connections, etc complete. 33 Servicing and overhauling of programmable logic controller panels complete system. Servicing ,repairing of programmable logic controller panels by checking software routine, debugging software, analysing the ladder diagrams, checking hardware and relay module, terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of control cables as required. Cleaning of panel, tightening of all connections, etc complete. 34 Repairing, servicing of electromagnetic flow meter a P/F main kit PCB b P/F single card c Panel weather proof including internal wiring and components d Service charges e Setting and callibration of flow meter 35 Reparing of On line UPS pure sine wave by dismanteling, trasportation and reinstalling after repairing complete. a 1KVA b 2KVA c 3KVA d 6KVA e 10KVA 36 Servicing of DG control panel by servicing of EPU unit, battery charger, setting of timer, making control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware procured from material list like voltmeter, ammeter, selector switches, connector, MCB, indicators, push buttons. Also tightening of connections and cleaning of panel complete. 37 Servicing and overhauling of battery charger panel Servicing and overhaulling of battery charger panel by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, provided indicators, voltmeter, ammeter, selector switches termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections, cleaning of battery terminals, checking battery voltages, battery cable lugs, etc complete 38 Servicing of RO/UV/UF water purifier by changing/cleaning of carbon filter, pre filter, sedement filter candles, cleaning of water purifier etc complete. 39 Repairing in point wiring wiring for light fan instrument with ISI mark 2-1sq.mm, copper wire PVC insulated 1.1KV grade with necessary accessories as required complete. 40 Repairing in power point wiring with ISI mark 2-1.5 sq.mm, copper wire PVC insulated 1.1KV grade with necessary accessories as required complete. 41 Repairing of board with necessary accessories as required complete. 42 Installation of transformer with loading, unloading, transportation 43 Carrying out necessary tests before and after charging transformer upto full load to satisfaction by connecting earthing, incomming and outgoing cables etc complete. 44 Providing minor repairs to existing plumbing system. 45 Providing major repairs to existing plumbing system. 46 Tracing out fault in cable/cable kit/cubical, removing the connection of cable, taking insulation test. After fixing new cable/cable kit, making termination of the cable again taking insulation test and giving satisfactory test and trials, etc complete. 47 Dismantalling temporary hangging wires accessories, etc complete. 48 Chiselling of wall for laying cable / mains, clamping it properly and refilling the broken wall by using POP etc complete. 49 Repairing, servicing of synchronization panel by servicing of contactor by changing provided contact kits, coil, servicing of electronic controller, control relays terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, push buttons, voltmeter, ammeter, selector switches, termination of incoming outgoing cables as required. Also tightening of connections and cleaning of panel complete. 50 Annual Maintenance Contract for Power Genset includes routine check-up visits with following scope of work and all breakdown visits including spares and major repairs throughout the year. A 82.5KVA Gangapur Dam Pumping Station B 140KVA Shivaji Nagar WTP. C 250KVA Dwarka Pumping Station D 250KVA Gopalnagar Pumping Station E 400KVA Chehedi Pumping Station F 400KVA Nasikroad WTP. G 400KVA Gandhinagar WTP. H 400KVA Nilgiribag WTP. I 600KVA Panchavati WTP Scope of worka B check kit (oil filter set, fuel filter set) shall be changed as required. b Engine oil 15W40 suitable for genset shall be changed as required. c Air cleaner element shall be changed as required. d Coolant shall be filled and top up as required. e Checking temperature, removing leakages, checking battery voltage, battery charging voltage, output voltage, frequency, AVR, tappet setting for good performance of genset. f Routine checkup visits should be done monthly. g Apart from above scope of work all major works to be carried out including all spares of generator excluding panel, batteries as and when required through out the year except total engine failure, natural disaster like flood etc. 51 Transformer oil filtration 52 Making trench in soft soil for laying provided cable 53 Breaking bituminous/ concreate road by JCB/Tractor breaker complete. 54 Providing and casting in situ cement concrete M-15 / 1:2:4 of trap / granite / quartzite / gneiss metal, moulded or chamfered as per drawing or as directed for coping to plinth or parapet, including centering, form work, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulin, roughening them if special finish is to be provided and curing and finishing if required etc. complete. (The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Wooden planks / shuttering will not be allowed) 55 Providing and laying jointless a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee- LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing complete. 56 Repairing, servicing of crane panel by servicing forward/reverse contactor. Checking control wiring, adjusting limit switches, giving satisfactory test and trials of control systems etc complete. 57 Dismantling, disconnecting connections of all cables of ATS starters as fer following details. a Up to 80 HP. b 80HP to 200HP c 200HP to 300HP. 58 Erection of ATS starter panel at desired place including loading unloading and transportation and grouting it properly, etc complete as fer following details a Up to 200 HP. b 200HP to 300HP. 59 Annual Electrical inspection, compliance, test reports of earthing, insulation test etc complete for substation. 60 Annual Maintenance Contract for surge arrestor includes routine checkup visits with following scope of work and all breakdown visits including all spares and major repairs throughout the year etc complete. a Checking of surge arrestor pnumatic system by checking valve, pressure gauge, level gauge, solenoid valve, servicing of surge arrestor tank component, giving test and trials of automatic functioning of magnetic level sensors, checking all pressure etc complete. b Checking of compressor piston ring, gasket, shaft, filter, oil seal, oil ring, discharge valve, inlet valve, oil filling/top up and giving satisfactory test & trials of compressor. i Compressor No-1 ii Compressor No-2 c Checking of control panel for surge arrestor unit by checking terminations, power and control wiring, lugs, tie, saddle, ferrules, bus bars, hardware insulator, gasket, indicators, voltmeter, ammeter, selector switches. Cleaning of panel, tightening of all connections etc complete. 61 Repairing servicing of VCB/VC by checking operating mechanism, alignment of contacts, applying jelly to various parts, tightening all connections, polishing contacts, checking auxiliary contacts, closing coils, terminal strips, VCB/VC operation, insulation tests and giving satisfactory test and trial complete. 62 Repairing servicing of control feeder panel for VCB/VC by checking terminations, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, bus bars, changing hardware insulator, gasket, indicators, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete. 63 Repairing servicing and attending breakdown of CG Lucy unit by checking operating mechanism, alignment of contacts, applying jelly to various parts, tightening all connections, polishing contacts, checking fuses, top up oil level, oil BDV test, CG Lucy operation, insulation tests and giving satisfactory test and trial complete. 64 Servicing of OLTC by checking operating mechanism, alignment, applying jelly to various parts, checking of control panel operations and replacement of provided indicators, switches, control fuses, hardware, insulator, gasket, polishing contacts, power and control wiring using appropriate wire, lugs, tie, saddle, ferrules, termination of incoming outgoing cables as required. Cleaning of panel, tightening of all connections etc complete.
Contract Date: Jun 10, 2026 Contract Value : ₹ 94.40 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
13.
Power #11258335 AOC
Tender for Requirement Of Rotork Make Actuators Spares Unit # 5 & 6, 2X660 Mw Csctpp, Chhabra , Rotork Actuator Type K1000f16a And K1000f16e , Motor Assembly Wt(192Rpm) , Motor Assembly Wt(24Rpm) , Handwheel Top , Screwed Collar , Felt Seal , Rotork Actuator Type K600f14a And K600f14e , Motor Assembly Wt(192Rpm) , Motor Assembly Wt(48Rpm) , Motor Assembly Wt(18Rpm) , Handwheel Top , Screwed Collar , Felt Seal , Rotork Actuator Type K300f14a And K300f14e , Motor Assembly Wt(48 Rpm) , Handwheel Top , Screwed Collar , Felt Seal , Center Column , Thrust Base Assy , Rotork Actuator Type K150f10a And K150f10e , Motor Assembly Wt(144 Rpm) , Handwheel Top , Screwed Collar , Felt Seal , Spare Parts For Gear Box Gs250 +Gz 25 , Motor Assembly Wt(18 Rpm) , Handwheel Top , Screwed Collar , Felt Seal , Spare Parts For Gear Box Gs250 +Gz 25 , Motor Assembly Wt(18 Rpm) , Handwheel Top , Screwed Collar , Felt Seal , Common For Spare , Limit / Torque Switch 2No+2Nc , Current Position Transmitter (Cpt) , Switch Mechanical Assy Wd 9205G/9265G (Without Contactless Cpt Assy.) , Terminal Block Assembly
Contract Date: Jun 10, 2026 Contract Value : ₹ 80.79 Lakh
Boards / Undertakings / PSU No of Bidders 1
Rajasthan View Result →
14.
Agriculture #11254288 Technical Bid
Tender for Rate Contract/Purchase Of Instrument Spares , Air Limit Switch 1/4,Make- Nucon , Seal Kit For Air Limit Switch 1/4 , Quick Exhust Valve 3/4, Make- Duncan , Diaphragm For Quick Exhaust Valve 3/4 , Quick Exhust Valve 1/4, Make- Duncan , Diaphragm For Quick Exhaust Valve 1/4 , Pneumatic Vibrator, Make- Oli,Type- Ot25s Ept025s , Pneumatic Power Cylinder, Make- Duncan, Model- C0630305,Bore Size- 6, Stroke- 305Mm , Repairing Seal Kit For Pneumatic Power Cylinder, Make- Duncan,Model- C0630305,Bore Size- 6, Stroke- 305Mm , On/Off Valve(Blow Valve 50 Nb), Make- Aira, Model- Aycv, Type- N/C, Size- 50Mm , Conveying Nrv 50 Nb , Pressure Gauge, Make- Baumer, Range- 0 To 10 Kg/Cm^2,Dial Size- 2.5, Type- Panel Mounting, Fitting Size- 1/4(M) Back Fitting , M.F.Lubricator, Make- Shavo, Model- Sl60m-4G-Db, Connection Fitting- 1/2 Bsp , Solenoid Valve With 230V Ac Coil, Make- Duncan, Part No.-A43013, Uid- 1004, Size- 1/4 , On/Off Valve, Make- Aira, Type- N/C, Size- 1/2 , S.S. Tee, Size- 1/2Npt(M)*1/4Npt(M)*1/4Npt(M) , M.S. Reducer, Size- 1/4(M)*1/2(M) , Air Filter, Make- Shavo, Model- Sf60g-4G-M7db, Fitting Size- 1/2 Bsp , Hose Pipe, Make- Parker Markwel , Size- Sae 100R3-12-I.D.-3/4-W.P.52 Bar1750 Psi , Hose Pipe, Make- Parker Markwel , Size- Sae 100R6-8-I.D.-1/2-W.P.28 Bar/400 Psi , Rtd Pt-100 3-Wire(Duplex) Make- Tempsens, Sensor Od- 6Mm, Sensor Length-300Mm, Fitting Size- Adjustable Connector 1/2(M)Bsp , Pressure Gauge Glycerine Filled, Make- General,Range- 0 To 10000 Psi(G), Dial Size- 6, Type - Panel Mounting, Fitting Size- 3/8(M) Bsp Back Side , Pressure Gauge(Glycerine Filled) Make- Wika,Range- 0 To 600 Kg/Cm^2, Dial Size- 4, Fitting Size- 1/2(M) Bsp Bottom Side , Pressure Gauge(Glycerine Filled) Make- Micro,Range- 0 To 10 Kg/Cm^2, Dial Size- 4, Type- Panel Mounting,Fitting Size- 3/8(M) Bsp , Smps Power Supply Make- Omron,Rating- 2.5 Amp., Input- 230V Ac, Output- 24V Dc , Signal Isolator Make- Masibus, Model- 9000L, Input- 4 To 20 Ma, Output- 4 To 20 Ma(Dual), Power Supply- 230V Ac , Signal Isolator Make- Masibus, Model- 9000L, Input- 0 To 10V, Output- 4 To 20 Ma(Dual), Power Supply- 20-265V Ac/Dc(45-65Hz),5Va Max. , Signal Isolator Make- Pepperl+Fuchs, Model- S1sd-1 Ai-2U, Input- 4 To 20 Ma, Output- 4 To 20 Ma(Dual), Power Supply- 24V Dc/1.4W , M.S.Reducer, Size- 3/8(F)*1/4(F) , Donally Chute Level Transmitter Cum Controller With Brass Sensor(06 Nos.), Model- M-11 , Acrylic Sheet Transparent,Size- 10Mm Thickness, Len.-8 Feet * Width-4 Feet. , Vibration Sensor Make- Hansford, Model- Hs-420F0255001, Sr. No.- 746480, 4-20Ma Velocity Output (Mm/Sec.) , Proximity Sensor Pnp Capacitive Type Make- Ifm, Model- Ki5002 Ki-3015-Bpkg/Nis: 15 Mmnf, Ub : 10-36 Vdc, Ie: 250 Ma , Skf Lincoln 623-25453-3 Grease Lubricant Pressure Switch 130-260 Bar, Dia.8 Mounting Type- Direct, Switch Type- Piston,Batch No.:1950 , Limit Switch For Lubrication System Make- Telemecanique Xcks En/Iec 60947-5-1, Ui: 500V, Uimp: 6Kv, Ac-15 240 V 3A, En50041, Ind. Cont.Eq 170 M, A300-Q300, Type- 4X , Mounting Stud For Vibration Sensor , Material - S.S. , Smart Positioner, Make- Siemens, Model- Sipart Ps2(Single Output) 6Dr5110-0Nn00-0Aa0 , Cable Assembly Of Vibration Sensor With 2 Pin Connector , Tth200 Head Mount Temperature Transmitter, Make- Abb,Input- Rtd Pt-100 3Wire, Output- 4 To 20 Ma+Hart,Range- 0 To 600 Deg.C,Power Supply- 11-42V Dc(Loop Powered), ( Input Range Should Be Changed By Hart) , Smart Positioner With Feedback Card, Make- Metso (Neles), Model No.- Nd7000( Dual Output ), Type- N07102hnt, Input- 9.7 Vdc/20Ma/485 Ohm , Ethernet Cable Cat6( Utp Cable Fr-Pvc Grey) Make- Polycab, Item Code- P-Sc-C60-Utp-Pvc Gry-305, , Smps Power Supply, Make- Mean Well, Model- Sdr-960-24, Input- 230V Ac 6.0A, Output- 24V Dc, 40A , Smps Power Supply, Make- Mean Well, Model- Ndr-480-24, Input- 230V Ac 5.3A, Output- 24V Dc, 20A , Smps Power Supply, Make- Mean Well, Model- Edr-120-24, Input- 230V Ac 2.6A, Output- 24V Dc, 5A , Air Lock Relay, Make- Fairchild, Catalog No.- W20359, 1 Unit Signal Produces, 1 Unit Output. , Complete Assembly Set Of Motorized Valve, Make- Auma, Order No.-91008393, W/D No.-3-Wdp-44449, Code- Zdaa103a-A6b00,Type- Sa25a32 , Actuator Of Main Steam Line Motorized Valve, Make- Auma, Order No.- 91008506, W/D No.- 3-Wdp-44449, Code- Zdaa103a-A6boo,W.No. W O No.: 4719Ia83174 , Repairing Seal Kit , Make- Neles.M O No.- 4005370480, Model No.- Ccda00bgnb250300sp2p4 , Repairing Seal Kit , Make- Neles.M O No.- 4005360307, Model No.- Scda00bgnb06330sp2p4 , Filter Regulator, Make- Shavo, Model- Sb20k-2G-M6d/Rgmb- 1/4 Bsp , Dp Transmitter With 3-Way Manifold Valve, Make- Abb 2600T,Lrl/Url: -40Kpa/40Kpa,Output Signal- 4 To 20 Ma+Hart,Power Supply- 10.5 To 42V Dc,Calib. Range- -750 To 0 Mmh2o,Product Code- 266Dshfssb2a7lsb2r1i2 , Dp Transmitter With 3-Way Manifold Valve, Make- Abb 2600T,Lrl/Url: -160Kpa/160Kpa,Output Signal- 4 To 20 Ma+Hart,Power Supply- 10.5 To 42V Dc,Calib. Range- 0/10000 Mmh2o,Product Code- 266Dshhssb2a7lsb2r1i2 , Pressure Transmitter, Make- Abb 2600T, Lrl/Url: -100Kpa/60000Kpa,Output Signal- 4 To 20 Ma+Hart,Power Supply- 10.5 To 42V Dc,Calib. Range- 0 To 250 Kg/Cm^2 , Tth200 Head Mount Temperature Transmitter, Make- Abb,Input- K Type Thermocouple,Output- 4 To 20 Ma+Hart,Range- 0 To 1200 Deg.C,Power Supply- 11-42V Dc(Loop Powered), (Input Range Should Be Changed By Hart) , Air Header ,Material- S.S. , Pressure Gauge, Make- General/Warree, Range- 0 To 250 Kg/Cm^2,Dial Size- 6,Fitting Size- 1/2(M) Bsp Bottom Side , Draught Gauge(Vacuum), Make- Baumer/Micro,Dial Size- 6(Circular Type), Range- 1000/0 Mmwc, Fitting Size- 1/2(M) Bsp Bottom Side. , Handheld Digital Temperature Meter With K Type Thermocouple, Temp. Range- 0 To 1200 Deg.C, Wire Length- 1.5 Mtr., Sensor Dia.- 6Mm, Sensor Length-600Mm. , Temperature Gauge, Make- General/Warree, Range- 0 To 600 Deg.C,Sensor Od- 6Mm,Sensor Length- 600Mm,Dial Size- 6, Fitting Size- 1/2(M) Bsp Bottom Side. , Rtd Pt-100 3Wire(Duplex), Make- Tempsens, Sensor Od- 6Mm, Sensor Length- 600Mm, Fitting Size- Adjustable Connector 1/2(M) Bsp , Compound Lapping Paste , Digital Indicator, Make- Masibus,Model- Lc5296h, Input- 4 To 20 Ma, Power Supply- 230V Ac. , S.S. Needle Valve,Make- Nisan Sig 1/2A,Ss316, 1095, Pgvd-895 , Auto Drain Valve With Timer, Make- Hydint, Size- 1/2, Model- Adf , Control Card And Power Supply Card Of 3Kva Ups , Pulse Jet Diaphragm Solenoid Valve With 230V Ac Coil , Make- Rotex, Model- 24108-28-8G, Atm 0.5-8.5, Media Air, Fitting Size- 1 1/4(F) Bsp , Temperature Gauge, Make- General/Warree, Range- 0 To 600 Deg.C,Sensor Od- 6Mm,Sensor Length- 600Mm,Dial Size- 6, Fitting Size- Adjustable Connector 1/2(M) Bsp Bottom Side. , Diode O Ring, Make- Ul, Model- Ulpwdor-40A Spd R1 , Diode O Ring, Make- Ul, Model- Ulpeddio-10A R , Profibus Cable Connector, Make- Vipa, Model- 972-0Dp10-A , Ethernet Switch, Make- Cisco, Model- Sg350-28 28-Port Gigabit Managed Switch , Exhaust Fan For Dcs Panel, Make- Rexnord, Model- Rec 22038A2t,Amp.- 0.10 , Power Supply- 230V Ac, 50 Hz , Limit Switch For Dcs Panel,Type- Ls-1010-1, 10A - 500V Ac, 1No+1Nc , Cfl Light For Dcs Panel,Make- Wipro, Led Batten 5W, D530565, 6500K,500Im,0.024A,220-240V Ac,50 Hz , Flat Panel Monitor, Make- Dell, Model-E2420h,Input Rating- 100-240V, 50Hz, 0.8A , Cpu,Make- Dell Emc,Model- Poweredge T40 , Hdmi Cable, Model- Yx53c-Pan1-07E Dp , Keyboard, Make- Dell/Hp , Mouse, Make- Dell/Hp , Mouse Pad , Rj-45 Connector , Trio2-Diode/12-24Dc/2X20/1X40,Make- Phoenix Contact, Input- Dc 12-24V 2*20A, Operating Voltage: Dc 10-30V,Output- Dc 40A , Lithium Battery, Make- Saft/Ls 14250, Rating- 3.6V Dc , Profibus Communication Card For Mitsubishi Drive , Model- Fr-A7np, Software Version- 7732 C , Profibus Communication Card For Mitsubishi Drive , Model- Fr-A8np, , Brass Silencer , Size- 3/4(M) Bsp , Brass Silencer, Size- 1/4(M) Bsp , Brass Silencer, Size- 3/8(M) Bsp , Brass Silencer, Size- 1/2(M) Bsp , Hex Head Bolt With Nut , Size- M5*45Mm, ( Thread 5Mm* Length 45Mm), Material- S.S. , Pressure Gauge Glycerine Filled Make- General/Warree, Range- 0 To 4 Kg/Cm^2, Dial Size- 6, Fitting Size- 1/2(M) Bsp Bottom Side , Pressure Gauge Glycerine Filled Make- General/Warree, Range- 0 To 10 Kg/Cm^2, Dial Size- 6, Fitting Size- 1/2(M) Bsp Bottom Side , Pressure Gauge Glycerine Filled, Make- General/Warree, Range- 0 To 40 Kg/Cm^2, Dial Size- 6, Fitting Size- 1/2(M) Bsp Bottom Side , Compound Gauge Glycerine Filled Make- General/Warree, Dial Size- 6, Range- -1 To 1.5 Kg/Cm^2, Fitting Size- 1/2(M) Bsp Bottom Side , K Type Thermocouple Duplex Make- Tempsens, Sensor Od- 8Mm, Sensor Length- 450Mm, Fitting Size- Adjustable Connector 1/2(M) Bsp , Fuse Trip Indicator Ti600, Size- 6Mm*55Mm , Fuse Semicond. 56A,690V 56Et, Make- Bussmann , Pi Servo Amplifiermake- Moog,Model-G122-829A011, S/N-M0445. , Fluid Control System Of Qcnrv-I Make- Rotex, Type- 33101-10-3R, Atm: 0-20, Sr.No.- 19027714-18/20, Media: Air, Mfg: 8/2019, Id: 19101344-V0-1.000-19027713 , Fluid Control Valve Of Qcnrv-I Make- Siemag, Model No.- Fcv-3-Alsize- 3/8 Npt, Batch: 0719,Test By: Sg , Pr. : 10 Kg/Cm^2 , Direction Control Valve Make- Cesare Bonetti Size- Nf5pan520n00000, , Flow Control Valve Of Extraction Qcnrv Make- Cesare Bonetti Model No.- Fcv-6A , Open/Close Limit Indicator Of Extraction Qcnrv Model No.- V7-1C17e9-201 , Quick Exhaust Valve Of Extraction Qcnrv Make- Cesare Bonetti Size- 9301201 Db , Smart Transmitter Power Supply Kfd2-Stc5-Ex1.20Make- Pepperl+Fuchs , Hbc Fuse Linkmake- Siemens,Rating- 2A , Electro-Pneumatic Positionermake- Ytc, Model- Yt-1000Lsn132s1, Explosion Proof- Non Explosion, Input- 4 To 20 Ma Dc , Thread Cable( Rtd Pt-100 ,3 Wire )Armoured Shielded Cable Multistrand Copper Wire, 1 Pair*1.0Mmsq. , Air Lock Relay Make- Pneucon, Model- Pal400, Conns.- 1/4 Nptf, Swp- 7 Kg/Cm^2,Set At- 1.5 Kg/Cm^2 , Liquid Level Transmitter Series 401E With Level Cage Make- Automat, Model- 401E-W-D- ]I[-Aein-5-750Mm, special repair No.- 22/1/258, installation Type- R.H.S.,Output Current- 4 To 20 Ma Dc,Supply Voltage- 11-35V Dc , Level Switch 40H Series With Level Cagemake-Automat, Model- 40Hwp/54S/Sdw/K3-Iv, E.R.- 0.5A 110Vdc, S.P.Gravity- 1.0 Min.,Rating- Fv+1.1 Kg/Cm^2 120 Deg.C,Test Pre.- 2.0 Kg/Cm^2, S.No.- 19/10/430, Cert No.- Tc/P/523 , Vacuum Transmitter Make- Abb 2600T, Lrl/Url: 0.07Kpa/600Kpa, Calib. Range- 0 To 2 Kg/Cm^2,Power Supply- 10.5 To 42V Dc, Output Signal- 4 To 20 Ma+Hart , Vacuum Gaugemake- General/Warree, Dial Size- 6, Range- 0 To 760 Mmhg, Fitting Size- 1/2(M) Bsp Bottom Side , Temperature Gaugemake- General/Warree, Range- 0 To 200 Deg.C,Dial Size- 6, Sensor Od- 6Mm,Sensor Length- 300Mm, Fitting Size- Adjustable Connector 1/2(M) Bsp Bottom Side , M.S. Socket 1/2 , Smart Type Temperature Transmittermake- Abb Ttf Series,Input- Rtd Pt-100 3Wire, Output- 4 To 20 Ma+Hart,Range- 0 To 200 Deg.C,Power Supply- 11-42V Dc , M.S.Nipple 1/2 , 4 Ph Buffer Solution , 7 Ph Buffer Solution , Dp Transmitter With 3-Way Manifold Valvemake- Abb 2600T,Lrl/Url: -40Kpa/40Kpa,Output Signal- 4 To 20 Ma+Hart,Power Supply- 10.5 To 42V Dc,Product Code- 66Dshfssb2a7lsb2r1i2 , Conductivity Solution 100 Grade Standard 100 Microsiemens/Cm , Compound Gaugemake- General/Warree, Range- -760 Mmhg To 1.5 Kg/Cm^2, Dial Size- 6, Fitting Size- 1/2(M) Bsp Bottom Side , Ph Transmitter Make- Abbmodel- Awt420 4 Wire Transmitter 3Kxa005010u0000serial No.- 3K220000807066power Supply - 100-240V Ac, 50/60Hz, 15W Max. , Ph Sensor Make- Abbmodel- Tb556j3615t154 Wire( Red, Black, Blue And White) , Compound Gaugemake- General/Warree, Range- -760 Mmhg To 1.5 Kg/Cm^2, Dial Size- 6, Fitting Size- 1/2(M) Bsp Bottom Side , Pu Tube, Make- Janatics,Size- 6Mm*4Mm,Colour- Black. , Pu Tube, Make- Janatics,Size- 10Mm*8Mm,Colour- Blue. , Differential Pressure Level Transmitter Make- Abb 2600T, Lrl/Url: -160Kpa/160Kpa,Calib. Range- 0/6000 Mmh2o,Output Signal- 4 To 20 Ma+Hart, Power Supply- 10.5 To 42V Dc, Product Code- 266Drhhssa2a7 Lsr1i2,Type- Diaphragm Type With Flange. , Pu Tube, Make- Janatics,Size- 8Mm*6Mm,Colour- Blue. , Push Fit Connector,Make- Janatics,Size- 8Mm*3/8(M) , Push Fit Elbow, Make-Janatics, Size- 8Mm*1/4(M) , Push Fit Elbow, Make-Janatics, Size- 6Mm*1/4(M) , Push Fit Elbow, Make-Janatics, Size- 6Mm*3/8(M) , Push Fit Tee, Make-Janatics, Size- 8Mm*8Mm*1/4(M) , Push Fit Tee, Make-Janatics, Size- 6Mm*6Mm*1/4(M) , Push Fit Tee, Make-Janatics, Size- 6Mm*6Mm*3/8(M) , Push Fit Jointer, Make- Janatics, Size- 8Mm*8Mm , Push Fit Jointer, Make- Janatics, Size- 10Mm*10Mm , Push Fit Connector, Make- Janatics, Size- 10Mm*1/2(M) , Push Fit Connector,Make- Janatics,Size- 10Mm*1/4(M) , Push Fit Connector,Make- Janatics,Size- 8Mm*1/2(M) , Push Fit Connector,Make- Janatics,Size- 8Mm*1/4(M) , Push Fit Connector,Make- Janatics,Size- 6Mm*3/8(M) , Push Fit Connector,Make- Janatics,Size- 6Mm*1/2(M) , Push Fit Connector,Make- Janatics,Size- 6Mm*1/4(M) , Push Fit Connector,Make- Janatics,Size- 10Mm*3/8(M) , Pressure Gauge Make- General/Warree, Dial Size- 6, Range- 0 To 2 Kg/Cm^2, Fitting Size- 1/2(M) Bsp Bottom Side , Pressure Gauge Make- General/Warree, Dial Size- 6, Range- 0 To 16 Kg/Cm^2, Fitting Size- 1/2(M) Bsp Bottom Side , Pressure Gauge Make- General/Warree, Dial Size- 6, Range- 0 To 1.6 Kg/Cm^2, Fitting Size- 1/2(M) Bsp Bottom Side , Pressure Gauge Make- General/Warree, Dial Size- 6, Range- 0 To 10 Kg/Cm^2, Fitting Size- 1/2(M) Bsp Bottom Side , M.S.Socket 1/2 , M.S.Nipple 1/2, Length- 4 , M.S.Socket 3/8 , M.S.Socket 1/4 , M.S.Reducer , Size- 1/2(F)*3/8(F) , M.S.Reducer , Size- 1/4(F)*3/8(F) , M.S.Reducer , Size- 1/2(F)*1/4(F) , M.S.Connector, Size- 3/8(M)*3/8(M) , M.S.Connector, Size- 1/4(M)*1/4(M) , M.S.Connector, Size- 3/8(M)*1/2(M) , M.S.Connector, Size- 1/2(M)*1/4(M) , M.S.Tee 1/2(F) , G.I.Tee 1/2(F) , G.I.Socket 1/2 , G.I.Elbow 1/2(F) , G.I.Union 1/2(F) , G.I.Line 1/2, Both Side Thread 1/2(M) , M.S.Tee 6 , Gi Valve ½ , Teflon Tape 1/2 Make- Champion , Length- 12 Meter , Decade Resistance Boxmake- Micro Logics, Model- Ml1006. , Repairing Seal Kitmake- Revo, Model- Ety9020020a, Pmax(Bar/Psi)- 8/116, Art. No.- Rs5090010a00000, Qsp:10 , Repairing Seal Kitmake- Revo, Model- Ety9020020a, Pmax(Bar/Psi)- 8/116, Art. No.- Rd5050007000000, Qsp:0 , Auto Drain Valve With Timermake- Hydint, Size- 1/2, Model- Adf , S.S. Ball Valve 1/2 , Repairing Seal Kit , Make- Rotex, Model- 3012 , Repairing Seal Kit , Make- Rotex, Model- 3013 , Air Filter Regulatormake- Shavo, Model- Sb60k-4G-M7p-Rglb, Fitting Size- 1/2 Bsp , Flr Unit(Filter Lubricator Regulator)Make- Kushako, Model- Af2016 And Lub2016, Size- 1/2(F) Bsp , Air Regulatormake- Kushako, Model- Ar2016 , Pressure Switchmake- Indfoss, Model- Psm-520-100, Range- 0-100 Psi, Diff.- 9-85 Psi , Solenoid Valve With 230V Ac Coilmake- Rotex, Model- 3012 , maintenance Cylinder , Pu Tube For maintenance Cylindersize- 4Mm , Solenoid Valve With 230V Ac Coil Of maintenance Cylinder , S.S. Connector For maintenance Cylinder To Solenoid Valvesize- 1/8(M)*1/4(M) , Air Flow Valve For maintenance Cylindersize- 1/8(M) Thread *4Mm(Push Fit) , Double Acting Actuator Make- Deltorqtype - Da, Size- 115 , Repairing Seal Kit Of Double Acting Actuator Make- Deltorq Type - Da, Size- 115 , Single Acting Actuator With Flow Valve(Ball Valve)Make- Deltorqact. Size- Dt 065 Sr:09Valve Size/Rating- 1 Blv/# 150Air Fail. Position - Closemini. Air Pressure - 5 Bar , Repairing Seal Kit Of Single Acting Actuator Make- Deltorqact. Size- Dt 065 Sr:09 , Double Acting Actuator Make- Deltorq Type - Da, Size- 085 , Repairing Seal Kit Of Double Acting Actuator Make- Deltorq Type - Da, Size- 085 , Repairing Seal Kit Of Actuator Make- Deltorqsize- 150 , Double Acting Actuatormake- Deltorqsize- 150 , Solenoid Valve With 230V Ac Coilmake- Delvalmodel- Svsn-300-4E1, Press: 2-8 Bar , Temperature Scanner 8 Channel Make- Masibus, Model No.- 8208, Input- Universal(Rtd Pt-100/Ma/T/C), Output- Dual Relay, Power Supply- 230V Ac , Push Fit Elbow Make- Janatics, Size- 1/4(M)*8Mm , Brass Connector, Size- 1/8(M)*1/4(F) , Panel Lock Triangle Shape Type, Material- S.S., Size- 25Mm Male Thread With Nut , Weighing Controller Make- Hi-Tech, Model- 009, Power Supply - 230V Ac , Limit Switchmake- Id Ideal, Model- Idca12-2-Q Iec347-5-1, En60647-5-1, No/Nc , No4 3No Nc1 2Nc , Digital Countermake- Selec Xc410, Ord Code- Xc410a-1-230, Supply- 230V Ac , Smps Power Supplymake- Omron,Rating- 2.2 Amp., Input- 230V Ac, Output- 24V Dc, Model- S8fs-C05024j , Relay Board(Eight Channel)Make- Inno, Model- Arb-8D-2I-G2rl-2 Dc24 , Load Cellmake- Sensortronics, Model- 65023-110K-Nc-02X, Cap.- 110 Kg @3.002 Mv/V,S/N-80529319 Vishay , Flr Unit(Filter Lubricator Regulator)Make- Janatics, Product Code- Ph156334, Filter Element Type- 40 Microns, Port Size- 1/2(F)Bsp , Seal Kit For Coarse/Fine Cylindermake- Janatics, Model- A64040050 O-M , Seal Kit For Load Bucket Cylindermake- Janatics, Model- A12040160 O , Seal Kit For Bag Clamp Cylindermake- Janatics, Model- A64050050 O , Level Switch For Sugar Binmake- Endress Hauser, Power Supply- 230V Ac, Model- Minicap Ftc-260, Output- Dual Contact(No/Nc) , Push Fit Connector, Make- Janatics, Size- 1/4(M)*10Mm , Push Fit Elbow Make- Janatics, Size- 1/4(M)*8Mm , Relay Board 16 Channel 1C/O-24Vdcmodel: Ul24d16-C V1make: Avp Corp , Magenetic Flow Meter Rs-485 Supported, Make- Abb, , Power Supply- 230V Ac, Size- 3Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter Rs-485 Supported, Make- Abb, , Power Supply- 230V Ac, Size- 4Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter Rs-485 Supported, Make- Abb, , Power Supply- 230V Ac, Size- 5Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter Rs-485 Supported, Make- Abb, Power Supply- 230V Ac, Size- 6Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb, , Output- 4-20Ma, Power Supply- 230V Ac, Size- 2Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb, , Output- 4-20Ma, Power Supply- 230V Ac, Size- 2.5Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb, Output- 4-20Ma , Power Supply- 230V Ac, Size- 3Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb, Output- 4-20Ma , Power Supply- 230V Ac, Size- 4Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb, Output- 4-20Ma , Power Supply- 230V Ac, Size- 5Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb Output- 4-20Ma, , Power Supply- 230V Ac, Size- 6Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb, Output- 4-20Ma , Power Supply- 230V Ac, Size- 8Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb, Output- 4-20Ma , Power Supply- 230V Ac, Size- 10Guarantee Period- 1 Year With Calibration & Test Certificate , Magenetic Flow Meter, Make- Abb, Output- 4-20Ma , Power Supply- 230V Ac, Size- 12Guarantee Period- 1 Year With Calibration & Test Certificate
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 9
Haryana View Result →
15.
Power #11246285 AOC
Bids Are Invited For Il Palakkad Make Electronic Position Transmitter With Linkages, Model: Ept 002L Total Quantity : 14
Contract Date: Ref. Documents Contract Value : ₹ 13.39 Lakh
Boards / Undertakings / PSU No of Bidders 1
Rajasthan View Result →
16.
Power #11172793 AOC
Bids Are Invited For Actuator Diaphragm Actuator Diaphragm For Control Valve Sl No 221272-221273 , Spare 13 Actuator Diaphragm -Epdm Sl No 230768 - 230769 , Actuator Diaphragm Control Valve 4313-Cv-2958 Sl No 230800 To 230803 , Actuator Diaphragm Control Valve 4- 3611-Cv-2951 Sl No 230779 To 230781 , Spare 18 Actuator Diaphragm-Epdm Sl No 230820 To 230839 , Actuator Diaphragm Control Valve 4-4113-Cv-2959 Sl No 230690 To 230693 , Actuator Diaphragm 3336-Cv-4 Sl No 230344 To 230347 , Actuator Diaphragm 3331-Cv-6 Sl No 230316 To 230319 , Actuator Diaphragm 3332-Cv-12 Sl No 230326 To 230329 , Actuator Diaphragm 3331-Cv-15 Sl No 230320- 230321 , Actuator Diaphragm 3332-Cv-5 Sl No 230322 To 230325 , Actuator Diaphragm 3361-Cv-1 Sl No 230330 To 230337 , Actuator Diaphragm For Control Valve 3332-Cv-17 Sl No 230342 - 230343 , Actuator Diaphragm For Control Valve 3332-Cv-14 Sl No 230338-230339 , Actuator Diaphragm For Control Valve 3334-Cv-38 Sl No 230350-230351 , Actuator Diaphragm For Control Valve 3336-Cv-15 Sl No. 230348 - 230349 , 63332-Cv-15 Purification By Pass Cv Diaphragm 18 Inch 20 Holes Sl No 230340-230341 , Pneumatic Positioner , Position Transmitter , Actuator Stem Nut For Control Valve 3361-Cv-1 Sl No 230330-230337 Total Quantity : 50
Contract Date: Ref. Documents Contract Value : ₹ 16.27 Lakh
Boards / Undertakings / PSU No of Bidders 1
Maharashtra View Result →
Tamil Nadu View Result →
Maharashtra View Result →
19.
Public Administrative Department #11123771 AOC
Bids Are Invited For Position Feedback Transmitter For Control Valves As Per Spec Total Quantity : 120
Contract Date: Ref. Documents Contract Value : ₹ 26.18 Lakh
Government Departments No of Bidders 3
Tamil Nadu View Result →
Tamil Nadu View Result →
21.
Power #11101736 Technical Bid
Tender for Procurement Of Spares For Various Rotork Make Electrical Actuators For Stps, Sarni , Common Spares For Rotork Make Actuators , Open / Stop / Close Knob Assly (Control Spindle) , Local / Remote Knob Assly (Isolator Spindle) , Basic Set Loom Assly , P.B Cover Assy Wt , Terminal Block 64 Terminals (Wt & Flp) , Folomatic Card , Timing Belt , L/P Relay Assly , Syncro Pak Assy With Housing (Wt) With 23A Contactor Assy , Inter Posing Relay For Basic S Pack , Olr Indication , Epoxy Basic Switch ( 2 No + 2 Nc ) Long Lead , Main Pcb (Mk Vii) , Contactor Assy (12 A) , Power Module Assy , Limit Switch Mechanism , Aux Switch 1 No + 1 Nc Changeover , Aux Switch 2 No + 2 Nc , Loom For Pb Assembly , Switch Mechanism Assy With Ind Wt , Indication Lamp Set , Current Position Transmitter 2/3 Wire , Terminal Block Assembly Wt , Contactless Cpt For K Range Actuators , Spares For K30f10a / K60f10e , Disc Spring Set , Oil Seal & Oring Kit , Hand Wheel Retainer , H/Wheel Thrust Washer , Felt Seal Kit , Screwed Collar , Yoke Return Spring Set , Stud And Nut (1 Set) B5 , Vane Module , Spares For K600g1/G2 A , Lsd Shaft , Lsd Retainer , Complete Bearing Set , Disc Spring Set , Oil Seal & Oring Kit , Handwheel Retainer , H/Wheel Thrust Washer , Felt Seal Kit , Screwed Collar , Yoke Return Spring Set , Stud And Nut (1 Set) B5 , Vane Module , Spares For K1000g3 , Complete Bearing Set , Disc Spring Set , Oil Seal & Oring Kit , Handwheel Retainer , H/Wheel Thrust Washer , Felt Seal Kit , Screwed Collar , Yoke Return Spring Set , Stud And Nut (1 Set) B5 , Vane Module
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
22.
Power #11087205 Technical Bid
Tender For Procurement Of Position Feedback Transmitters For Hpcv, Ipcv Of Turbine & Lpbp Control Valves Of Unit No. 1 To 4 (Ph-I & Ii), Sgtps, Mppgcl, Birsinghpur
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
23.
Public Administrative Department #11081232 Technical Bid
Tender for Work Of Replacement Of Position Transmitter Assembly Of Jogeshwari Actuator At Veravali Hill Reservoir 01 Under Ae(Maint) Ww Ws South Division
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
24.
Agriculture #11073626 Technical Bid
Tender for Rate Contract Of I And S Make Valves And Instruments Spares , Conductivity Transmitter Make-I&S I) Lcd 93X70mm , Conductivity Transmitter Make-I&S Ii) Controller 80 Pin , Conductivity Transmitter Make-I&S Iii) Main Pcb , Conductivity Transmitter Make-I&S Iv)Conductivity Cum Supply Box , Conductivity Transmitter Make-I&S V)Smps 24V Dc 2.2 annual periodical maintenance , Conductivity Transmitter Make-I&S Vi)Smps 12V Dc 1.3 annual periodical maintenance , Conductivity Transmitter Make-I&S Vii)Push Switch For Timer , Conductivity Transmitter Make-I&S Viii)Glass Fuse 2 annual periodical maintenance Cap & Fuse , Conductivity Electrode Make-I&S I)Electrode Teflon Sleeve , Conductivity Electrode Make-I&S Ii)Electrode Teflon Cap , Conductivity Electrode Make-I&S Iii)Double Acting Sov ¼ Port Size , Conductivity Electrode Make-I&S Iv)Sov Coil 24V Dc , Conductivity Electrode Make-I&S V)Cylinder Piston And O Ring Set , Conductivity Electrode Make-I&S Vi)Sensor Rod Completed , Continuous Machine Feeding Panel Make- I&S I)Valve Position Indicator Dav44p , Continuous Machine Feeding Panel Make: I&S Ii)Pid Controller Honeywell Input:4-20Ma Output:4-20Ma Alram- 02 Nos , Continuous Machine Feeding Panel Make: I&S Iii)Toggle Switch Black, Yellow, Green 01 Each , Continuous Machine Feeding Panel Make: I&S Iv)Current Transducer 0-5Amp/4-20 Ma Pc5m-S1 , Continuous Machine Feeding Panel Make: I&S V)Current Transformer 0-150Amp/0-5Amp , Continuous Machine Feeding Panel Make: I&S Vi)Manual Current Card 4-20Ma , Continuous Machine Feeding Panel Make: I&S Vii)Smps 24V Dc 2.2Amp , Continuous Machine Feeding Panel Make: I&S Viii)Push Switch , Continuous Machine Feeding Panel Make: I&S Ix)Transformer 0-160/10W , Continuous Machine Feeding Panel Make: I&S X)Transformer Gtr 12-0-12 , Continuous Machine Feeding Panel Make: I&S Xi)Analog Isolator 6230 With Pcb , Continuous Machine Feeding Panel Make: I&S Xii)Led Lamp Red, Green, Yellow 01 Each Multi Turn Port 500E , V-Notch Ball Valve (Feed Control Valve B Cvp Cell 1) Size-40Mm Tag No: 5Cv920 Make-I&S I) Ptfe Seatring Set , V-Notch Ball Valve (Feed Control Valve B Cvp Cell 1) Size-40Mm Tag No: 5Cv920 Make-I&S Ii) V Ring Set , V-Notch Ball Valve (Feed Control Valve B Cvp Cell 1) Size-40Mm Tag No: 5Cv920 Make-I&S Iii)Body Joint Gaskit , V-Notch Ball Valve (Feed Control Valve B Cvp Cell 1) Size-40Mm Tag No: 5Cv920 Make-I&S Iv)Mor , V-Notch Ball Valve (Feed Control Valve C Cvp Cell 5) Size-50Mm Tag No: 5Cv932 Make-I&S I)Ptfe Seatring Set , Av-Notch Ball Valve (Feed Control Valve C Cvp Cell 5) Size-50Mm Tag No: 5Cv932 Make-I&S Ii)V Ring Set , V-Notch Ball Valve (Feed Control Valve C Cvp Cell 5) Size-50Mm Tag No: 5Cv932 Make-I&S Iii)Actuatotor (Sr-65) Seal Kit , V-Notch Ball Valve (Feed Control Valve C Cvp Cell 5) Size-50Mm Tag No: 5Cv932 Make-I&S Iv)Body Joint Gaskit , V-Notch Ball Valve (Feed Control Valve C Cvp Cell 5) Size-50Mm Tag No: 5Cv932 Make-I&S V)Mor , V-Notch Ball Valve (Feed Control Valve C Cvp Cell 5) Size-50Mm Tag No: 5Cv932 Make-I&S Vi)Afr Shavo 114Sn , V-Notch Ball Valve (Feed Control Valve C Cvp Cell 5) Size-50Mm Tag No: 5Cv932 Make-I&S Vii)E/P Positinor Isep1000l , V-Notch Ball Valve (Hot Water Control Valve C Cvp Cell 2) Size-25Mm Tag No: 5Cv104 Make-I&S I)Ptfe Seatring Set , V-Notch Ball Valve (Hot Water Control Valve C Cvp Cell 2) Size-25Mm Tag No: 5Cv104 Make-I&S Ii)V Ring Set , V-Notch Ball Valve (Hot Water Control Valve C Cvp Cell 2) Size-25Mm Tag No: 5Cv104 Make-I&S Iii)Actuatotor (Sr-65) Seal Kit , V-Notch Ball Valve (Hot Water Control Valve C Cvp Cell 2) Size-25Mm Tag No: 5Cv104 Make-I&S Iv)Body Joint Gaskit , V-Notch Ball Valve (Hot Water Control Valve C Cvp Cell 2) Size-25Mm Tag No: 5Cv104 Make-I&S V)Mor , V-Notch Ball Valve (Hot Water Control Valve C Cvp Cell 2) Size-25Mm Tag No: 5Cv104 Make-I&S Vi)Afr Shavo 114Sn , V-Notch Ball Valve (Hot Water Control Valve C Cvp Cell 2) Size-25Mm Tag No: 5Cv104 Make-I&S Vii)E/P Positinor Isep1000l , Globe (Milk Of Lime To Juice Defecator Control) Size-65Mm Tag No: 5Cv1301 Make-I&S I)Ptfe Seat , Globe (Milk Of Lime To Juice Defecator Control) Size-65Mm Tag No: 5Cv1301 Make-I&S Ii)V Ring Set , Lobe (Milk Of Lime To Juice Defecator Control) Size-65Mm Tag No: 5Cv1301 Make-I&S Iii)Actuator Diaphragm And O Ring Set , Globe (Milk Of Lime To Juice Defecator Control) Size-65Mm Tag No: 5Cv1301 Make-I&S Iv)Bonnet Gaskit , Globe (Milk Of Lime To Juice Defecator Control) Size-65Mm Tag No: 5Cv1301 Make-I&S V)Diaphargm Spring (Light Red Small) , Control) Size-65Mm Tag No: 5Cv1301 Make-I&S Vi)Afr Shavo 114Sn , Globe (Milk Of Lime To Juice Defecator Control) Size-65Mm Tag No: 5Cv1301 Make-I&S Vii)E/P Positinor Isep1000l , Globe (Raw Sugar Melter Brix Control) Size-150Mm Tag No: 5Cv1105 Make-I&S I)Ptfe Seat , Globe (Raw Sugar Melter Brix Control) Size-150Mm Tag No: 5Cv1105 Make-I&S Ii)V Ring Set , Globe (Raw Sugar Melter Brix Control) Size-150Mm Tag No: 5Cv1105 Make-I&S Iii)Actuator Diaphragm And O Ring Set , Globe (Raw Sugar Melter Brix Control) Size-150Mm Tag No: 5Cv1105 Make-I&S Iv)Bonnet Gaskit , Globe (Raw Sugar Melter Brix Control) Size-150Mm Tag No: 5Cv1105 Make-I&S V)Diaphargm Spring (Light Red Small) , Globe (Raw Sugar Melter Brix Control) Size-150Mm Tag No: 5Cv1105 Make-I&S Vi)Afr Shavo 114Sn , Globe (Raw Sugar Melter Brix Control) Size-150Mm Tag No: 5Cv1105 Make-I&S Vii)E/P Positinor Isep1000l , Globe (R2/R3 Pan Feed Control) Size-200Mm Tag No: 5Cv1101 Make-I&S I)Ptfe Seat , Globe (R2/R3 Pan Feed Control) Size-200Mm Tag No: 5Cv1101 Make-I&S Ii)V Ring Set , Globe (R2/R3 Pan Feed Control) Size-200Mm Tag No: 5Cv1101 Make-I&S Iii)Actuator Diaphragm And O Ring Set , Globe (R2/R3 Pan Feed Control) Size-200Mm Tag No: 5Cv1101 Make-I&S Iv)Bonnet Gaskit , Globe (R2/R3 Pan Feed Control) Size-200Mm Tag No: 5Cv1101 Make-I&S V)Diaphargm Spring (Light Red Small) , Globe (R2/R3 Pan Feed Control) Size-200Mm Tag No: 5Cv1101 Make-I&S Vi)Afr Shavo 114Sn , Globe (R2/R3 Pan Feed Control) Size-200Mm Tag No: 5Cv1101 Make-I&S Vii)E/P Positinor Isep1000l , Butterfly (Hot Water Flow Control To Scum Clarifier-2) Size-65Mm Tag No: 5Cv1106 Make-I&S I)Epdm Seat , Butterfly (Hot Water Flow Control To Scum Clarifier-2) Size-65Mm Tag No: 5Cv1106 Make-I&S Ii)V Ring Set , Butterfly (Hot Water Flow Control To Scum Clarifier-2) Size-65Mm Tag No: 5Cv1106 Make-I&S Iii)Actuator(Sr-75) Seal Kit Set , Butterfly (Hot Water Flow Control To Scum Clarifier-2) Size-65Mm Tag No: 5Cv1106 Make-I&S Iv)Mor , Butterfly (Hot Water Flow Control To Scum Clarifier-2) Size-65Mm Tag No: 5Cv1106 Make-I&S V)Afr Shavo 114Sn , Butterfly (Hot Water Flow Control To Scum Clarifier-2) Size-65Mm Tag No: 5Cv1106 Make-I&S Vi)E/P Positinor Isep1000ra , Globe (Shww Temp Control) Size-100Mm Tag No: 5Cv219 Make-I&S I)Ptfe Seat , Globe (Shww Temp Control) Size-100Mm Tag No: 5Cv219 Make-I&S Ii)V Ring Set , Globe (Shww Temp Control) Size-100Mm Tag No: 5Cv219 Make-I&S Iii)Actuator Diaphragm And O Ring Set , Globe (Shww Temp Control) Size-100Mm Tag No: 5Cv219 Make-I&S Iv)Bonnet Gaskit , Globe (Shww Temp Control) Size-100Mm Tag No: 5Cv219 Make-I&S V)Diaphargm Spring (Light Red Small) , Butterfly (Condensate Water To Flash Recovery System) Size-80Mm Tag No: 5Cv1107 Make-I&S I)Epdm Seat , Butterfly (Condensate Water To Flash Recovery System) Size-80Mm Tag No: 5Cv1107 Make-I&S Ii)V Ring Set , Butterfly (Condensate Water To Flash Recovery System) Size-80Mm Tag No: 5Cv1107 Make-I&S Iii)Actuator(Sr-75) Seal Kit Set , Butterfly (Condensate Water To Flash Recovery System) Size-80Mm Tag No: 5Cv1107 Make-I&S Iv)Mor , Globe (Ffe 1St Effect Melt concrete Level Control) Size-150Mm Tag No: 5Cv1107 Make-I&S I)Diaphargm Spring (Light Red) , Globe (R1 H Conditioner Outlet Molasses Brix Control) Size-50Mm Tag No: 5Cv108 Make-I&S I)Ptfe Seat , Globe (R1 H Conditioner Outlet Molasses Brix Control) Size-50Mm Tag No: 5Cv108 Make-I&S Ii)V Ring Set , Globe (R1 H Conditioner Outlet Molasses Brix Control) Size-50Mm Tag No: 5Cv108 Make-I&S Iii)Actuator Diaphragm And O Ring Set , Globe (R1 H Conditioner Outlet Molasses Brix Control) Size-50Mm Tag No: 5Cv108 Make-I&S Iv)Bonnet Gaskit , Globe (R1 H Conditioner Outlet Molasses Brix Control) Size-50Mm Tag No: 5Cv108 Make-I&S V)Diaphargm Spring (Blue) , Globe (Hot Water To B&C Melter Brix Control) Size-80Mm Tag No: 5Cv110 Make-I&S I)Ptfe Seat , Globe (Hot Water To B&C Melter Brix Control) Size-80Mm Tag No: 5Cv110 Make-I&S Ii)V Ring Set , Globe (Hot Water To B&C Melter Brix Control) Size-80Mm Tag No: 5Cv110 Make-I&S Iii)Actuator Diaphragm And O Ring Set , Globe (Hot Water To B&C Melter Brix Control) Size-80Mm Tag No: 5Cv110 Make-I&S Iv)Bonnet Gaskit , Globe (Hot Water To B&C Melter Brix Control) Size-80Mm Tag No: 5Cv110 Make-I&S V)Diaphargm Spring (Light Red Small) , Butterfly (Hot Condensate Ugr Level Control) Size-125Mm Tag No: 5Cv111 Make-I&S I)Epdm Seat , Butterfly (Hot Condensate Ugr Level Control) Size-125Mm Tag No: 5Cv111 Make-I&S Ii)V Ring Set , Butterfly (Hot Condensate Ugr Level Control) Size-125Mm Tag No: 5Cv111 Make-I&S Iii)Actuator(Sr-92) Seal Kit Set , Butterfly (Hot Condensate Ugr Level Control) Size-125Mm Tag No: 5Cv111 Make-I&S Iv)Mor , Butterfly (Hot Condensate Ugr Level Control) Size-125Mm Tag No: 5Cv111 Make-I&S V)Afr Shavo 114Sn , Butterfly (Hot Condensate Ugr Level Control) Size-125Mm Tag No: 5Cv111 Make-I&S Vi)E/P Positinor Isep1000r , Globe (Tubewell Water Overhead Tank Level Control) Size-200Mm Tag No: 5Cv113 Make-I&S I)Ptfe Seat , Globe (Tubewell Water Overhead Tank Level Control) Size-200Mm Tag No: 5Cv113 Make-I&S Ii)V Ring Set , Globe (Tubewell Water Overhead Tank Level Control) Size-200Mm Tag No: 5Cv113 Make-I&S Iii)Actuator Piston Cub And O Ring Set , Globe (Tubewell Water Overhead Tank Level Control) Size-200Mm Tag No: 5Cv113 Make-I&S Iv)Bonnet Gaskit , Globe (Tubewell Water Overhead Tank Level Control) Size-200Mm Tag No: 5Cv113 Make-I&S V)Spring (Silver) , Butterfly On/Off (Ffe 1St Effect Emergency Water Control) Size-80Mm Tag No: 5Sov101 Make-I&S I)Epdm Seat , Butterfly On/Off (Ffe 1St Effect Emergency Water Control) Size-80Mm Tag No: 5Sov101 Make-I&S Ii)V Ring Set , Butterfly On/Off (Ffe 1St Effect Emergency Water Control) Size-80Mm Tag No: 5Sov101 Make-I&S Iii)Actuator(Sr-75) Seal Kit Set , Butterfly On/Off (Ffe 1St Effect Emergency Water Control) Size-80Mm Tag No: 5Sov101 Make-I&S Iv)Mor , Butterfly On/Off (Ffe 1St Effect Emergency Water Control) Size-80Mm Tag No: 5Sov101 Make-I&S V)Afr Shavo 114Sn , Butterfly On/Off (Ffe 1St Effect Emergency Water Control) Size-80Mm Tag No: 5Sov101 Make-I&S Vi)Sov Rotex 30125-1.8-2G , Butterfly On/Off (Melting Water Tank Water Control) Size-100Mm Tag No: 5Sov1101 Make-I&S I)Epdm Seat , Butterfly On/Off (Melting Water Tank Water Control) Size-100Mm Tag No: 5Sov1101 Make-I&S Ii)V Ring Set , Butterfly On/Off (Melting Water Tank Water Control) Size-100Mm Tag No: 5Sov1101 Make-I&S Iii)Actuator(Sr-83) Seal Kit Set , Butterfly On/Off (Melting Water Tank Water Control) Size-100Mm Tag No: 5Sov1101 Make-I&S Iv)Mor , Abutterfly On/Off (Melting Water Tank Water Control) Size-100Mm Tag No: 5Sov1101 Make-I&S V)Afr Shavo 114Sn , Butterfly On/Off (Melting Water Tank Water Control) Size-100Mm Tag No: 5Sov1101 Make-I&S Vi)Sov Rotex 30125-1.8-2G , Butterfly On/Off (Raw Sugar Melter Tank Level Control) Size-150Mm Tag No: 5Sov1102 Make-I&S I)Epdm Seat , Butterfly On/Off (Raw Sugar Melter Tank Level Control) Size-150Mm Tag No: 5Sov1102 Make-I&S Ii)V Ring Set , Butterfly On/Off (Raw Sugar Melter Tank Level Control) Size-150Mm Tag No: 5Sov1102 Make-I&S Iii)Actuator(Sr-92) Seal Kit Set , Butterfly On/Off (Raw Sugar Melter Tank Level Control) Size-150Mm Tag No: 5Sov1102 Make-I&S Iv)Mor , Butterfly On/Off (Raw Sugar Melter Tank Level Control) Size-150Mm Tag No: 5Sov1102 Make-I&S V)Afr Shavo 114Sn , Butterfly On/Off (Raw Sugar Melter Tank Level Control) Size-150Mm Tag No: 5Sov1102 Make-I&S Vi)Sov Rotex 30125-1.8-2G , Butterfly On/Off (Air Flow Control Deep Bed Filter 1St) Size-50Mm Tag No: 5Sov1106 Make-I&S I)Epdm Seat , Butterfly On/Off (Air Flow Control Deep Bed Filter 1St) Size-50Mm Tag No: 5Sov1106 Make-I&S Ii)V Ring Set , Butterfly On/Off (Air Flow Control Deep Bed Filter 1St) Size-50Mm Tag No: 5Sov1106 Make-I&S Iii)Actuator(Sr-63) Seal Kit Set , Butterfly On/Off (Air Flow Control Deep Bed Filter 1St) Size-50Mm Tag No: 5Sov1106 Make-I&S Iv)Mor , Butterfly On/Off (Air Flow Control Deep Bed Filter 1St) Size-50Mm Tag No: 5Sov1106 Make-I&S V)Afr Shavo 114Sn , Butterfly On/Off (Air Flow Control Deep Bed Filter 1St) Size-50Mm Tag No: 5Sov1106 Make-I&S Vi)Sov Rotex 30125-1.8-2G , Abutterfly On/Off (Liquor Outlet Flow Control From Deep Bed Filter-Ii) Size-150Mm Tag No: 5Sov1111 Make-I&S I)Epdm Seat , Butterfly On/Off (Liquor Outlet Flow Control From Deep Bed Filter-Ii) Size-150Mm Tag No: 5Sov1111 Make-I&S Ii)V Ring Set , Butterfly On/Off (Liquor Outlet Flow Control From Deep Bed Filter-Ii) Size-150Mm Tag No: 5Sov1111 Make-I&S Iii)Actuator(Sr-92) Seal Kit Set , Butterfly On/Off (Liquor Outlet Flow Control From Deep Bed Filter-Ii) Size-150Mm Tag No: 5Sov1111 Make-I&S Iv)Mor , Butterfly On/Off (Liquor Outlet Flow Control From Deep Bed Filter-Ii) Size-150Mm Tag No: 5Sov1111 Make-I&S V)Afr Shavo 114Sn , Butterfly On/Off (Liquor Outlet Flow Control From Deep Bed Filter-Ii) Size-150Mm Tag No: 5Sov1111 Make-I&S Vi)Sov Rotex 30125-1.8-2G , Butterfly On/Off (Air Flow Control Deep Bed Filter-Ii) Size-50Mm Tag No: 5Sov1112 Make-I&S I)Epdm Seat , Butterfly On/Off (Air Flow Control Deep Bed Filter-Ii) Size-50Mm Tag No: 5Sov1112 Make-I&S Ii)V Ring Set , Butterfly On/Off (Air Flow Control Deep Bed Filter-Ii) Size-50Mm Tag No: 5Sov1112 Make-I&S Iii)Actuator(Sr-63) Seal Kit Set , Butterfly On/Off (Air Flow Control Deep Bed Filter-Ii) Size-50Mm Tag No: 5Sov1112 Make-I&S Iv)Mor , Butterfly On/Off (Air Flow Control Deep Bed Filter-Ii) Size-50Mm Tag No: 5Sov1112 Make-I&S V)Afr Shavo 114Sn , Butterfly On/Off (Air Flow Control Deep Bed Filter-Ii) Size-50Mm Tag No: 5Sov1112 Make-I&S Vi)Sov Rotex 30125-1.8-2G , 3 Way-Globe (Condensate Return To Boiler Conductivity Control) Size-200Mm Tag No: 5Sov105 Make-I&S I)Ptfe Seatring Set , 3 Way-Globe (Condensate Return To Boiler Conductivity Control) Size-200Mm Tag No: 5Sov105 Make-I&S Ii)V Ring Set , 3 Way-Globe (Condensate Return To Boiler Conductivity Control) Size-200Mm Tag No: 5Sov105 Make-I&S Iii)Actuator Diaphargm And O Ring Set , 3 Way-Globe (Condensate Return To Boiler Conductivity Control) Size-200Mm Tag No: 5Sov105 Make-I&S Iv)Bonnet Gaskit Set , 3 Way-Globe (Condensate Return To Boiler Conductivity Control) Size-200Mm Tag No: 5Sov105 Make-I&S V)Diaphargm Spring (Silver) , 3 Way-Globe (Condensate Return To Boiler Conductivity Control) Size-200Mm Tag No: 5Sov105 Make-I&S Vi)Afr Shavo 114Sn , 3 Way-Globe (Condensate Return To Boiler Conductivity Control) Size-200Mm Tag No: 5Sov105 Make-I&S Vii)E/P Positioner Isep1000l , Butterfly On/Off (Ffe 1St Effect Melt concrete Emergency Water Control) Size-80Mm Tag No: 5Sov1115 Make-I&S I)Epdm Seat , Butterfly On/Off (Ffe 1St Effect Melt concrete Emergency Water Control) Size-80Mm Tag No: 5Sov1115 Make-I&S Ii)V Ring Set , Butterfly On/Off (Ffe 1St Effect Melt concrete Emergency Water Control) Size-80Mm Tag No: 5Sov1115 Make-I&S Iii)Actuator(Sr-75) Seal Kit Set , Butterfly On/Off (Ffe 1St Effect Melt concrete Emergency Water Control) Size-80Mm Tag No: 5Sov1115 Make-I&S Iv)Mor , Butterfly On/Off (Ffe 1St Effect Melt concrete Emergency Water Control) Size-80Mm Tag No: 5Sov1115 Make-I&S V)Afr Shavo 114Sn , Butterfly On/Off (Ffe 1St Effect Melt concrete Emergency Water Control) Size-80Mm Tag No: 5Sov1115 Make-I&S Vi)Sov Rotex 30125-1.8-2G , Globe (Milk Of Lime Control Valve At Etp) Size-65Mm Tag No: 5Cv1302 Make-I&S I)Ptfe Seat , Globe (Milk Of Lime Control Valve At Etp) Size-65Mm Tag No: 5Cv1302 Make-I&S Ii)V Ring Set , Globe (Milk Of Lime Control Valve At Etp) Size-65Mm Tag No: 5Cv1302 Make-I&S Iii)Actuator Diaphargm And O Ring Set , Globe (Milk Of Lime Control Valve At Etp) Size-65Mm Tag No: 5Cv1302 Make-I&S Iv)Bonnet Gaskit , Globe (Milk Of Lime Control Valve At Etp) Size-65Mm Tag No: 5Cv1302 Make-I&S V)Bonnet Gaskit , Globe (Milk Of Lime Control Valve At Etp) Size-65Mm Tag No: 5Cv1302 Make-I&S Vi)Diaphargm Spring (Light Red Small) , Globe (Imbibition Level Control) Size-150Mm Tag No: 1Cv901 Make-I&S I)Ptfe Seat , Globe (Imbibition Level Control) Size-150Mm Tag No: 1Cv901 Make-I&S Ii)V Ring Set , Globe (Imbibition Level Control) Size-150Mm Tag No: 1Cv901 Make-I&S Iii)Actuator Diaphargm And O Ring Set , Globe (Imbibition Level Control) Size-150Mm Tag No: 1Cv901 Make-I&S Iv)Bonnet Gaskit , Globe (Imbibition Level Control) Size-150Mm Tag No: 1Cv901 Make-I&S V)Diaphargm Spring (Light Red) , Globe (Imbibition Flow Control) Size-150Mm Tag No: 1Cv901 Make-I&S I)Ptfe Seat , Globe (Imbibition Flow Control) Size-150Mm Tag No: 1Cv901 Make-I&S Ii)V Ring Set , Globe (Imbibition Flow Control) Size-150Mm Tag No: 1Cv901 Make-I&S Iii)Actuator Diaphargm And O Ring Set , Globe (Imbibition Flow Control) Size-150Mm Tag No: 1Cv901 Make-I&S Iv)Bonnet Gaskit , Globe (Imbibition Flow Control) Size-150Mm Tag No: 1Cv901 Make-I&S V)Diaphargm Spring (Silver) , Butterfly (Rotary Screen Auto Wash Level Control) Size-125Mm Tag No: 1Cv904 Make-I&S I)Epdm Seat , Butterfly (Rotary Screen Auto Wash Level Control) Size-125Mm Tag No: 1Cv904 Make-I&S Ii)V Ring Set , Butterfly (Rotary Screen Auto Wash Level Control) Size-125Mm Tag No: 1Cv904 Make-I&S Iii)Actuator(Sr-92) Seal Kit Set , Butterfly (Rotary Screen Auto Wash Level Control) Size-125Mm Tag No: 1Cv904 Make-I&S Iv)Mor , Butterfly (Exhaust Steam Header Pressure Control ) Size-300Mm Tag No: 5Cv201 Make-I&S I)Double Off Set Ptfe Seat , Butterfly (Exhaust Steam Header Pressure Control ) Size-300Mm Tag No: 5Cv201 Make-I&S Ii)V Ring Set , Butterfly (Exhaust Steam Header Pressure Control ) Size-300Mm Tag No: 5Cv201 Make-I&S Iii)Actuator(Sr-140) Seal Kit Set , Butterfly (Exhaust Steam Header Pressure Control ) Size-300Mm Tag No: 5Cv201 Make-I&S Iv)Mor , Butterfly (Dch Outlet Juice Temp Control) Size-300Mm Tag No: 5Cv202 Make-I&S I)Epdm Seat , Butterfly (Raw Melt Heater Outlet Temp Control ) Size-200Mm Tag No: 5Cv204 Make-I&S I)Epdm Seat , Butterfly (Raw Melt Heater Outlet Temp Control ) Size-200Mm Tag No: 5Cv204 Make-I&S Ii)V Ring Set , Butterfly (Raw Melt Heater Outlet Temp Control ) Size-200Mm Tag No: 5Cv204 Make-I&S Iii)Actuator(Sr-105) Seal Kit Set , Butterfly (Raw Melt Heater Outlet Temp Control ) Size-200Mm Tag No: 5Cv204 Make-I&S Iv)Mor , Butterfly (Ljh-2 Dch Outlet Juice Temp Control ) Size-350Mm Tag No: 5Cv205 Make-I&S I)Epdm Seat , Butterfly (Ljh-2 Dch Outlet Juice Temp Control ) Size-350Mm Tag No: 5Cv205 Make-I&S Ii)V Ring Set , Butterfly (Ljh-2 Dch Outlet Juice Temp Control ) Size-350Mm Tag No: 5Cv205 Make-I&S Iii)Actuator(Sr-160) Seal Kit Set , Butterfly (Ljh-2 Dch Outlet Juice Temp Control ) Size-350Mm Tag No: 5Cv205 Make-I&S Iv)Mor , Butterfly (Ljh-3 Dch Outlet Juice Temp Control ) Size-350Mm Tag No: 5Cv206 Make-I&S I)Double Off Set Ptfe Seat , Globe (B&C Melter Temp Control) Size-100Mm Tag No: 5Cv212 Make-I&S I)Diaphargm Spring , Butterfly (Ffe 1St Effect Level Control ) Size-250Mm Tag No: 5Cv901 Make-I&S I)Epdm Seat , Butterfly (Ffe 1St Effect Level Control ) Size-250Mm Tag No: 5Cv901 Make-I&S Ii)V Ring Set , Butterfly (Ffe 1St Effect Level Control ) Size-250Mm Tag No: 5Cv901 Make-I&S Iii)Actuator(Sr-125) Seal Kit Set , Butterfly (Ffe 1St Effect Level Control ) Size-250Mm Tag No: 5Cv901 Make-I&S Iv)Mor , Iris( B C/F Machine-1 Massecuite Feed Control) Size- 6 To 12 Inch Tag: 5Cv911 Make-I&S I)4 Cylinder Piston & O Ring Set , Iris( B C/F Machine-1 Massecuite Feed Control) Size- 6 To 12 Inch Tag: 5Cv911 Make-I&S Ii)Body Flange O Ring Set , Ss Connector With Ferrule With Nut ¼ Tube Size-6Mm , Ep Positioner Piolet Type
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 1
Haryana View Result →
25.
Heavy Industries and Public Enterprises #11050043 AOC
Bids Are Invited For Electro Pneumatic Position Transmitter , Feedback Linkage For Pcp-001Positioner Total Quantity : 20
Contract Date: Ref. Documents Contract Value : ₹ 10.31 Lakh
Boards / Undertakings / PSU No of Bidders 1
Tamil Nadu View Result →
26.
Drinking Water Supply and Sanitation #11014793 Price Bid
Flow Measurement In Connection With Functionability Assessment At Different Points Of Different Zones Of Mograhat-I Block Under Falta Mathurapur Mega Surface Water Based Water Supply Project In South 24 Pgs District Under Smd Phe Dte.-2 Supply , delivery & storage at site of Full Bore Electromagnetic Flowmeter with inbuilt RTU and pressure sensor- 3 Full Bore type Electro Magnetic Flow meter with smart Transmitter ,protection : IP 67 ,output: Cellular radio,RX pulse/switch output 1X status input with 4 line backlit display, calibration lab as per ISO 17025 ,Accuracy : 0.5% +/- 2 mm /sec , measuring,Reference & Empty pipe ,Detection electrode with polyurethane /hard Rubber liner supply : 24 V DC /230 V AC operation via Bluetooth pressure Cell: 40 Bar with inbuilt 10 meter cable . The data logger logs up to 10,000 items A data item consists ofa time stamp and the configured values: volume flow, pressure, electrical conductivity, Totalizer 1 ,Totalizer 2, Totalizer 3, systems diagnostics status.The TLS encryption protocol is used fro wireless communication between the flow meter and the MQTT broker Make-Endress+Hauser/Krone marshall/Siemens/Any other approved vendor of PHED 4 Magntic Flow Meter DN 150 5 Supply , delivery & storage at site of weather proof Protection panel consisting of Fully wire protection panel with24 V DC,SMPS,Surge protection ,over voltage protection ,MCB all complete as per direction of EIC 6 Supply and Installation at site of MS flanged Dismantling joint ( PN 1.0 rating)-2 nos. , MS fabricated companion flanges(FF,IS: 6392 Tab 11)drilling to match as per IS 1538 table 4 & 6 ,DN 150 Slip on flange-2 nos., short piece with one end flange & one end socketed-2 nos., reducer/enlarger of appropriate size, Gaskets as requiredas per direction of EIC 7 Installation of flowmeter ( vertical mounting at suitable man height position ) as in item no. 1.0with proper allignment ,connection , protection etc all complete as per direction of EIC. (This is also including the charge of hiringtools & tackles ,welding including hiring of DG set , scaffolding arrangement (if required)arrangement of proper supporting etc all complete .) 8 Installation ofProtection panel (including connection of screened control cable through appropriate PVC conduit ( including the supply)the same as in item no. 2.0with proper allignment etc all complete 9 Supply and fixing of 4mm thick fabricated MS sheet protection boxfor vertical mountedflowmeter with hinge door , lockingarrangement andappropriate size MS angle support ,grouting etc all complete as per direction of EIC 10 Trial run for 12 months ( after installation and Commissioning) , calibration of meter by referral meter time to time ,configuration of meters, data analysis ,data upload ,submission of reports etc all complete 11 N.B.: 1. Test Certificate & Calibration certificate of the flowmeter should be submitted at the time of delivery.2. The system should have a provision for sending data in the end of Server/SCADA/Cloud should be provided and all the requirements for the same need to be furnished at the site endto make a successful communication between device and server /SCADA/ Cloud.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
27.
Defence #11000559 AOC
Bids Are Invited For Ee6045d-5350000 - Retrofit Kit-1 , Ee6045d-5451300 - Shaft Adapter For Pump Evac Se 044A , Ee6106b-6540349 - Solenoid Valve R1-2 In 2-Way 230V , Ee6045d-2504066-001 - Switch Selector 3-Position , Ee6045d-2504067-001 - Light Pilot White , Ee6045d-2504067-003 - Light Pilot Green , Ee6045d-3500035 - Gauge Pressure , Ee6045d-3700043-002 - Flange Coupling , Ee6045d-3700043-003 - Sleeve Coupling , Ee6045d-5430591 - Shut Off Valve Dn-100 , Ee6045d-5430599 - Shut Off Valve Dn 65 , Ee6045d-5430612 - Level Switch Stainless Float 220V 50-60 Hz , Ee6045d-5430648 - Nozzle , Ee6045d-5430675 - Flap Non Return For Ejector , Ee6045d-5430827 - Gasket 125-100X2 , Ee6045d-5430861 - Gasket , Ee6045d-5433594 - Hose Clamp , Ee6045d-5435015 - Discharge Valve Separator , Ee6045d-5437587 - Three Way Valve R 3-8 , Ee6045d-5437598 - Pressure Switch , Ee6045d-5451270 - Impeller 238Mm-50Hz For Pump Evac Se 044A 50Hz , Ee6045d-5774000 - Water Valve Evac 90 Shock , Ee6045d-5775500 - Control Mechanism , Ee6045d-5805900 - Hose For Push Button , Ee6045d-5957600 - T Connection , Ee6045d-5959902 - Mini Check Valve , Ee6045d-5970501 - Shut Off Valve R 1-2 , Ee6045d-6388402 - Impeller 214 50 Hz Application , Ee6045d-6540524 - Ventilator , Ee6045d-6540533 - Reducer 1 1-4 -50Mm , Ee6045d-6541056 - Outlet Pipe , Ee6045d-6541452 - Ragsnag Ring For Piping Colgging Prevebtion , Ee6045d-6541675 - Activator , Ee6045d-6544343 - Lube Exchange Kit O-Rings Screw Lobe Key , Ee6045d-6544345 - Mechanical Seal Kit O-Ring Mech Seal Dist Plate Screw , Ee6045d-6544346 - Wearing Plate Kit Screw Cover Plate , Ee6045d-6544769 - Rubber Bend , Ee6045d-6545051 - Valve Stem Kit , Ee6045d-6545052 - Mini Check Valve Kit Valve Seat O Ring Valve Flap , Ee6045d-6545826 - Toilet Evac 910- Tervi , Ee6106b-2618192 - Bolt , Ee6106b-3600119 - Cell Probe Assembly , Ee6106b-5430591 - Valve Gate Dn-100 , Ee6106b-5430834 - Nozzle , Ee6106b-5430861 - Gasket , Ee6106b-5431884 - Shut Off Valve , Ee6106b-5433244 - Rubber Plate , Ee6106b-5433583 - Bend Rubber , Ee6106b-5433594 - Hose Clamp 50-70 Din 3017Gemi Sx9 W1 , Ee6106b-5434519 - Fastening Plate , Ee6106b-5434552 - Wing Nut , Ee6106b-5437587 - Three Way Valve R 3-8 , Ee6106b-5437623 - Vacuum Gauge R1-2 Bar-1 0 , Ee6106b-5439534 - Nozzle , Ee6106b-5450072 - Impeller , Ee6106b-5481006 - Hose Flushing Ring , Ee6106b-5490518 - Impeller Nut , Ee6106b-5490522 - Mechanical Seal For 5 5-Qsh 101-F And 7.5-Hk 80-1 , Ee6106b-5507000 - Elbow Joint 8-8 , Ee6106b-5715300 - Ball , Ee6106b-5774150 - Filter , Ee6106b-5775500 - Control Mechanism , Ee6106b-5778995 - Connection Hose , Ee6106b-5805900 - Hose 4X2x1-1000 , Ee6106b-5821700 - Discharge Valve Dn 25 , Ee6106b-5900204 - Pneumatic Push Button , Ee6106b-5957600 - T-Connection , Ee6106b-5990180 - Hose Clamp 3 , Ee6106b-5990357 - Radial Gasket , Ee6106b-5990724 - Nut M8 High Stainless Din 1587 Capped , Ee6106b-6540369 - Pump Evac Se 044A Vem Motor , Ee6106b-6540524 - Ventilator For Vacuum Interface Unit , Ee6106b-6540525 - Float Valve , Ee6106b-6540534 - O-Ring 100 5X94 5X3 Nbr70 , Ee6106b-6540561 - Rubber Connection , Ee6106b-6541200 - Ejector Pump 4-Hk 50 , Ee6106b-6541213 - Gamma Ring , Ee6106b-6541458 - Pneumatic Push Button , Ee6106b-6542428 - Flushing Nozzle , Ee6106b-6542432 - Seat And Cover With Hinges , Ee6106b-6542434 - Control Mechanism Cvt , Ee6106b-6542811 - Discharge Valve One Plugged , Ee6106b-6543002 - Descharge V-V , Ee6106b-6543029 - Spare Part Kit For Water Valve Dn 40 , Ee6106b-6543035 - Sewage Kit , Ee6106b-6543120 - Bracket , Ee6106b-6543265M - Installation Kit , Ee6106b-6543553 - Pump Housing , Ee6106b-6543686 - Square Gasket , Ee6106b-6545662 - Bb2 Control Box , Ee6106b-6545664 - O2x Sensor W Cerlic , Ee6106b-6545665 - Itx Transmitter W 33 Ft Cable , Ee6106b-6545960 - Ss Vacuum Toilet Evac 910 Stainless Steel Model , Ee6106b-6546578 - Seat And Cover Toscana , Ee6106b-6547044 - Mechanical Seal For Pum. V26 , Ee6106b-6547049 - Macerator Hub , Ee6106b-6549073 - Kit Gaskets Complete , Ee6106b-6549074 - Kit Motor Bearing Complete , Ee6106b-6549075 - Kit Plug Complete , Ee6106b-6549076 - Kit Repair Complete , Ee6106b-6549079 - Impeller , Ee6106b-6549104 - Actuator 3-2 1-8 220 Ac , Ee6106b-6549125 - Level Switch , Ee6106b-6549128 - Level Switch , Ee6106b-6549138 - Pressure Gauge Glycerine Filled 0-6 Bar , Ee6106b-6549139 - Static Mixer 3-4 , Ee6106b-6549140 - Waste Water Flow Adjustment Valve , Ee6106b-6549985 - Air Flow Regulator , Ee6106b-6551140 - Kit Diaphragm , Ee6106b-6551141 - Kit Pump Head , Ee6106b-6551142 - Maintenance Kit , Ee6106b-6551143 - Kit Valve , Ee6106b-6551144 - Base Plate , Ee6106b-70404001 - Dosing Pump , Ee6106b-Iv6552360 - End-Face Seal Product-End , Ee6106b-Iv6559418 - O-Ring No. 15 , Ee6106b-Iv6574651 - Bearing , Ee6106b-Iv6574655 - Impeller , Ee6106b-M5430225 - Fastening Rod , Ee6106b-M6543030 - Spare Part Kit For Water Vakve , Ee6106b-M6543036 - Spares Part Kit For Ejector , Ee6106b-M6545302 - Float Total Quantity : 1617
Contract Date: Ref. Documents Contract Value : ₹ 10.41 Crore
Government Departments No of Bidders 1
Andhra Pradesh View Result →
28.
Power #10955404 Technical Bid
Tender for Procurement Of Il Make Complete Pneumatic Actuators For Unit No. 3 & 4, Sgtps, Mppgcl, Birsinghpur , Supply Part , Complete Pneumatic Actuator For Condensate System (Complete Actuator Along With All Mounting, Accessories & Smart Positioner Etc) • Tag: Cd-14 • Model: Vsc-Va5r • Size- 10 Inch, Lift- 100Mm • Rating- Ansi 300Bw • Body- A216wcb, Trim- 17-4-Ph Cv-720 • Packing- V-Teflon, Gasket- V-543/595 • Spring Rating- 0.4 To 1.2 Kg/Cm2 • Air Supply- 1.4 Kg/Cm2 • Air To- Open • Serial No. 9616535 • Make: Il , Complete Hfo Shut-Off Valve Pneumatic Actuator (Complete Actuator Along With All Mounting, Accessories I.E. Air Lock Relay, Positioner, Position Feedback Transmitter, I/P, Air Filter Regulator, Copper Tube Etc) • Sr. No.- 9810909,9810228 • Or No.- 2220857,2220844 • Tag No.- 0-40, 0-40 • Model- Vdc Va3r • Size-3 In; Lift-25 Mm • Rating- Ansi 300Rf • Body- A216 Wcr • Trim- Ss316tef Cv-99 • Chatts- On-Off • Packing- V-Teflon, Gasket- V-543/595 • Air Supply- (0.8-24) 2.8Kg • Air To- Open • Make: Il , Complete Ldo Shut-Off Valve Pneumatic Actuator (Complete Actuator Along With All Mounting, Accessories I.E. Air Lock Relay, Positioner, Position Feedback Transmitter, I/P, Air Filter Regulator, Copper Tube Etc) • Sr. No.- 9910047,9810206 • Or No.- 2220857,2220844 • Tag No.- 0-91, 0-91 • Model- Vdc Va1r, • Size- 2 In; Lift-14.3Mm • Rating- Ansi 300Rf • Body- A216 Wcr, • Trim- Ss316tef Cv-44 • Chatts- On-Off • Packing- V-Teflon, Gasket- V-543/595 • Air Supply- (0.8-24) 2.8Kg • Air To- Close, Open • Make: Il , Complete Long Recirculation Pneumatic Actuator For Hfo (Complete Actuator Along With All Mounting, Accessories I.E. Air Lock Relay, Positioner, Position Feedback Transmitter, I/P, Air Filter Regulator, Copper Tube Etc) • Sr. No.- 9810906,9810122 • Or No.- 2220857,2220844 • Tag No.- 0-51,0-48 • Model- Vsc Va 1D/ Vsc Va 1R • Size- 2 In ; Lift-14.3Mm • Rating- Ansi 300Rf • Body- A216 Wcr/ A216 Wcb • Trim- Ss316tef Cv-44 • Chatts- On-Off • Packing- V-Teflon, Gasket- V-543/595 • Air Supply- (0.2-1.0),1.4Kg / ( 0.4-1.2), 1.4Kg • Air To- Close • Make: Il , Complete Short Recirculation Pneumatic Actuator For Hfo (Complete Actuator Along With All Mounting, Accessories I.E. Air Lock Relay, Positioner, Position Feedback Transmitter, I/P, Air Filter Regulator, Copper Tube Etc) • Sr. No.- 9810907,9810123 • Or No.- 2220857,2220844 • Tag No.- 0-51,0-51 • Model- Vsc Va 1D • Size- 2 In ; Lift-14.3Mm • Rating- Ansi 300Rf • Body- A216 Wcr/ A216 Wcb • Trim- Ss316 Cv-44 • Chatts- On-Off • Packing- V-Teflon, Gasket- V-543/595 • Air Supply- (0.2-1.0) 1.4Kg • Air To- Close • Make: Il
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 1
Madhya Pradesh View Result →
29.
Heavy Industries and Public Enterprises #10906119 Price Bid
Tender for Purchase Of M/S Rotex Make Positioner For Gr Fan Control Valves Of Unit 4 At 4X270 Mw Btps Manuguru Site , Lumpsum Total Price For The Following Work: Posidapt Smart Positioner Model Expert - Basic Diagnostics Input Signal 4-20Ma Enclosure Aluminium Cover, Aluminium Body Servo Fail Freeze Pneumatic Port Connection 1/4 Npt Communication Hart Module Position Transmitter (4 To 20 Ma) Cable Entry 1/2 Npt Temperature -20 °C To +80 °C Certification None Remote Mount None Model Code Rtx-7-2-4-2R-H-P-4R Note Shaft To Mount New Fail Freeze Positioner In Place Of Old Positioner Shall Be Provided As Detailed In Tender Specification Number:
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Telangana View Result →
30.
Defence #10898653 AOC
Bids Are Invited For Leveling Assembly Actuator Seal Kit , Rotor Assembly Actuator Seal Kit , Rotor Arm Assembly Actuator Seal Kit , Double Pilot Check Valve , Double Throttle Cum Check Valve With Special Seals , Flow Divider And Combiner , Solenoid Assy For Lifting Valve , Solenoid Coil For Rotation Dc Valve , Solenoid Din Connector For Dc Valve , Pressure Compensated Flow Control Valve , Directional Control Valve 3 Position, Spring Centered , Directional Control Valve 3 Position, Spring Centered 3 Position, Spring Loaded, With P Blocked , Counter Balance Valve , Pressure Transmitter , Quick Release Coupling 3 By 8 Inch And 3 By 4 Inch , Quick Release Coupling 1 By 2 Inch , Proportional Pressure Reducing Valve , Amplifier Card For Proportional Valve , Return Line Filter Element 10 Micron , High Pressure Hoses 3 By 8 Inch X 20 Mtrs , High Pressure Hoses 1 By 2 Inch 20 Mtrs , Seal Kits For Flow Control Valve , Adaptor 1 By 2 Inch Npt X 3 By 8 Inch Npt , Adaptor 1 By 2 Inch Bsp X 3 By 8 Inch Bsp , Adaptor 1 By 2 Inch Npt X 1 By 2 Inch Npt , Weld Nipple Ss , Msc, Ss316 Total Quantity : 713
Contract Date: Ref. Documents Contract Value : ₹ 58.71 Lakh
Government Departments No of Bidders 12
Telangana View Result →
31.
Petroleum and Natural Gas #10884283 AOC
Bids Are Invited For Procurement Of Spares Of Mil Make Control Valves 21125,2Inx150 , Body Gasket, Model 21125- 2In- 150 , Plug And Stem M N 88-21814 2In 600 A216 , Ring,Seat,Clc V,Mil,38-21125,2In,300 , Gland Packing, Model 41121-2In- 1500 , Body Gasket, Model 41411- 12In- 150 , Plugstem,Vst2in,Cv44,Vaid,150 ,Il , Seat Gasket,Model 41412-12In- 150 , Body Gasket, Model 21125- 3In- 600 , Plug With Stem,38-21125,Cv47,3In,600 , Seat Ring,38-21125,3Inx600 , Gland Packing,Model41621-6In- 600 , Seat Gasket M N 87- 41425 6In 600 A217 , Plug Stem S A 37-21125,6Inx150 Mil , Seat Ring 37-21125,6Inx150 Mil , Packing Cv 21125 2Inx300,Mil , Body Gasket Cv 21125 2Inx300,Mil , Plug Stem,Ss316 Fsd,37-21125Eb,Cv46,2In , Mil,Seat Ring,Act38-41721 2In300cv46 , Packing,38- 21125,1.5Inx300 , Body Gasket 38-21125,1.5Inx300 Mil , Seat Ring 38-21125,1.5Inx300 Mil , Seat Gasket, C V,Mil-41112,3 ,300 , Seal Ring,Mil-416X1,2In,150 , Act. Diaphragm 6In Vlv,Ansi 150,Cv 275 , Actuator Diaphragm For Gt Vpr2masonilan , Actuator Diaphragm For Gt Vpr1masonilan , Bare Valve Body,68-81386,Mil,3 ,1500 , Mil Position Transmitter, Model 400L , Control Valve Pneumatic Directional Control Valve Total Quantity : 428
Contract Date: Ref. Documents Contract Value : ₹ 31.71 Lakh
Boards / Undertakings / PSU No of Bidders 1
Assam View Result →
Maharashtra View Result →
33.
Heavy Industries and Public Enterprises #10880958 AOC
Bids Are invited for L7017s5789702001 - Complete Set Of Electrical Actuator - L120-10E120plust300plussga2-92 As Per Ealier P-O- 7300000820 Dated - 18-03-2025 For Ukai Project , L7017s5789702002-Electronic Cards Set - 1 No- Of Each Type For Sl- No- 1 , L7017s5789702003- Position Transmitter - 1 No- Of Each Type For Sl- No- 1 , L7017s5789702004- Limit Switch - 20 Nos- Of Each Rating And Size For Sl- No- 1 , L7017s5789702005-Torque Switch - 20 Nos- Of Each Rating And Size For Sl- No- 1 , L7017s5789702006-Push Button Station - 5 Nos- Of Each Type For Sl- No- 1 , L7017s5789702007- Indication Leds - 10 Nos- Of Each Type And Rating For Sl- No- 1 , L7019s5789702001-Complete Set Of Electrical Actuator - L120-10E120plust300plussga2-92 As Per Ealier P-O- 7300000821 Dated - 18-03-2025 For Wanakbori - L7019s5789702001-Complete Set Of Electrical Actuator - L120-10E120plust300plussga2-92 As Per Ealier P-O- 7300000821 Dated - 18-03-2025 , L7019s5789702002-Electronic Cards Set - 1 No- Of Each Type For Sl- No- 8 , L7019s5789702003- Position Transmitter - 1 No- Of Each Type For Sl- No- 8 , L7019s5789702004-Limit Switch - 20 Nos- Of Each Rating And Size For Sl- No- 8 , L7019s5789702005-Torque Switch - 20 Nos- Of Each Rating And Size For Sl- No- 8 , L7019s5789702006-Push Button Station - 5 Nos- Of Each Type For Sl- No- 8 , L7019s5789702007-Indication Leds - 10 Nos- Of Each Type And Rating For Sl- No- 8 Total Quantity : 14
Contract Date: Ref. Documents Contract Value : ₹ 16.02 Lakh
Government Departments No of Bidders 1
Tamil Nadu View Result →
34.
Educational and Research Institute #10815224 Price Bid
Procurement, Installation And Maintenance Of Infrastructure And Communication Technology (Ict) Equipment And Consumables Procurement, Installation And Maintenance Of Infrastructure And Communication Technology (Ict) Equipment And Consumablesprabodhini College, Porvorim, Goa. , Category 2: Ict Equipment’S Estimated Cost:59,88,000 /- , Digital Metal Podium Powder-Coated Metal Cabinet, Free-Standing, With Lockable Caster Wheels For Mobility; Crca Steel ~1.6 Mm Thick; Metal Top; Locking Security System; Storage Space For Cpu, Keyboard & Mouse, Laptop Trays, Side Shelf, 21.5? Interactive Touch Monitor; Motorised Tiltable Monitor Mechanism; Scratch-Resistant, Anti-Glare Screen; Full Hd (1920×1080) Resolution; Supports Finger & Stylus Input; Annotation Software Capabilities, Built-In 120 W Rms Amplifier; Two 30 W Wall Speakers; Two Gooseneck Microphones; One Wireless Handheld Mic; One Wireless Collar Mic; The Usual Av Input/Output (Vga, Hdmi, Usb, Aux, Xlr, Etc., Cpu: Intel I5; Ram 8 Gb; Storage: 500Gb Hdd; Wifi And Bluetooth; Includes Keyboard & Mouse., Vga, Hdmi, Usb, Aux, Xlr; Rj-45 Lan Port; Vga/Hdmi Switcher; Front Panel “Source” Control; Power Sockets Etc., Dimensions: 28? X 22? X 47? (L × W × H) ; Weight ~ 80 Kg, Minimum 1 Year Warranty , Smartboards Preffered Make:Viewsonic/Samsung/Solitaire Panel Size: 75,Type/Tech: Ips Type,Display Area (Mm): Minimum 1650.24(H) × 928.26(V),Aspect Ratio: 16:9,Native Resolution: 4K60hz,Colours: 10 Bits,Brightness: Minimum 450 Nits Or Higher,Contrast Ratio: 1200:1 (Typ) 5000:1 (Dcr) Or More,Response Time: 8Ms Or Better,Viewing Angles: H = 178, V = 178 Typ.,Backlight Life: Minimum 50,000Hr Of Higher Surface Treatment: Hardness: 9H Or Higher,Thickness: 4Mm,Orientation: Landscape,Processor: Octa Core Arm Cortex-A73*4 + A53 * 4 Or Higher,Android 11.0 And Upgarade To 13,Ram: 8Gb Ddr4 Or More,Storage: 64Gb Or More Type/ Tech: Ir Recognition/ P-Cap,Touch Point: 40 Points Or Higher,Hdmi In: Minimum 3,Rs232: X1,Ops: 1 Audio Out: 3.5Mm X1,Spdif: X1, Rj45: X2,Type A: Usb 2.0 X2, Usb 3.0 X4 “Smartport Usb” To All Channels,Type B: X2, For Touch,Type C: X1 (Dp 1.2, Usb2.0, Pd65w, Ethernet 100M),Speakers: 12W X 2 + 16W X 1 Or More Light Sensor : Yes,Power Consumption: 140W Or Less,Eye Care Certification Like Low Blue Light & Flicker Free Certifications: Tuv, Fcc, Energy Star 8, Emc/Ce, Cb, Rohs & Doc, Reach Test Report, Weee Test Report, Bis, Epat Software Features: Entity Management & Device Manager To Manage Ifp Remotely Without Lan, Also To Share Content & Broadcast Messages Remotely Onto Ifps,Same Whiteboard Software For Windows, Android & Browser,Live Webcast Directly From Interactive Whiteboard Software To Youtube And Facebook, Screen Recording,Artificial Intelligence Pen,Wireless Casting On Ifp From Mobile & Laptop,Drag And Drop Youtube Videos, Direct Images From Google Search,Handwriting Recognition Text To Speech Inbuilt In Whiteboard Software (Male Or Female Voice),Create Online Quiz With Time Limit From Whiteboard Software,Auto Grading Of Answers,Download Results As Excel Sheets,Sign In Directly From Qr Code On Interactive Whiteboard Software And Link Cloud Storages (Google Drive, Microsoft One Drive, Box Or Drop Box),4K Ops Module With Intel Core I5 Or Better, 8 Th Generation Or Better, 8 Gb Ram 256Gb Ssd Or Better. Ops Secification: 4K Ops Module With Intel Core I5 Or Better, 8 Th Generation Or Better, 8 Gb Ram 256Gb Ssd Or Better. Additional: Latest Microsoft Office And Ups , Video Conferencing Equipment- Webcamera Along With Wireless Speaker And Bluetooth Dongle Microphones For Large Classroom Setup- Evota Ultra-Wide 4K Resolution Camera For High-Definition Video Capture, Hd Support, Built In Microphone, And Microphone Wireless Speaker Phone With Bluetooth Dongle, Speaker Output, Ai Noise Reduction, 8 Mic Array, Built In Dsp,High-Quality Audio Output Suitable For Conference Or Meeting Rooms,Plug-And-Play Support , Camera And Lens- Preffered Make:Canon, Nikon Sensor: 24.2Mp Full-Frame Cmos Sensor,Processor: Digic X,Iso Range: 100–102,400 (Expandable To 50–204,800) Autofocus: Dual Pixel Cmos Af Ii With Up To 1,053 Af Points,Continuous Shooting: Up To 40 Fps With Electronic Shutter,Viewfinder: 2.36M-Dot Oled Evf,Display: 3.0 Vari-Angle Touchscreen Lcd With 1.62M Dots,Video: 4K Uhd At 60P, 10-Bit 4:2:2, Connectivity: Wi-Fi, Bluetooth, Uvc/Uac For Webcam Use Lens Format: Full-Frame,Focal Length: 24–105Mm,Aperture: F/4–7.1,Image Stabilization: Up To 5 Stops,Autofocus: Stm Stepping Motor For Smooth And Quiet Focusing,Macro Capabilities: Center Focus Macro With 0.5X Magnification,Minimum Focusing Distance: 0.66 Ft (0.20 M) In Autofocus; 0.43 Ft (0.13 M) In Macro Mode,Filter Size: 67 Mm , Dual-Channel Wireless Microphone System System Type: Dual-Channel Wireless Microphone System With One Receiver And Two Transmitters. Microphone Type: Built-In Omnidirectional Microphones In Each Transmitter; Supports External Lavalier Microphones Via 3.5Mm Trs Input. Transmission Technology: Series Iv 2.4Ghz Digital Transmission With 128-Bit Encryption. Transmission Range: Up To 200 Meters (Line Of Sight). Frequency Response: 50Hz – 20Khz. Maximum Spl: 100 Db Spl (1Khz @ 1M). Battery Life: Up To 7 Hours On A Full Charge. Charging Port: Usb Type-C. , Wireless Connectivity- Wifi Routers Wifi Routers- Tplink Archer C6 Dual Band Router,Dual-Band Wi-Fi: Supports Both 2.4 Ghz And 5 Ghz Frequencies , All In One Pcs Preffered Make: Hp / Dell /Lenovo I5- 13Th Gen 1355U Or Above,8 Gb ,512 Gb ,23.8 Diagonal, Fhd (1920 X 1080), Ips, Anti-Glare, Wled-Backlit, 250 Nits, 72% Ntsc,Win 11 Pro,Intel® Uhd Graphics; Intel® Iris® X? Graphics; Intel® Graphics,Wired,Microsoft Office 21 Or Above 3 -Years , Video Camcorder- Preffered Make:Canon, Sony 4K Uhd Recording,1/2.3 Cmos Sensor,Digic Dv 6,Mp4 And Xf-Avc (Mxf),4K Uhd (3840 X 2160) At Up To 30 Fps,Full Hd 1080P At Up To 60 Fpsuhd 4K Camcorder, Xf-Avc: Up To 160 Mbps,Mp4: Up To 150 Mbps,Iso/Gain: 0 To 24 Db,F/1.8 To F/2.8,Up To 800X,5-Axis Dynamic Is (Optical + Digital),2 X Xlr Terminals (With Phantom Power),3.5Mm Stereo Mini-Jack,16-Bit/48Khz Linear Pcm And Aac,Headphone Output, Lcd Screen,Touchscreen, Usb-C: Supports Uvc For Livestreaming,Hdmi Output: Mini-Hdmi 2.0, Recording Media: Dual Sd/Sdhc/Sdxc Uhs-I Slotsheavy Duty Tripod Stand For Video Camera , Drone- Weight: < 249 G Flight Time: Min 34–45 Minutes Camera: 1/1.3 Cmos, 48 Mp, 24 Mm F/1.7 Lens Video: 4K Up To 100 Fps, 1080P Slow-Motion Up To 200 Fps, 150 Mbps Bitrate Photo Formats: Jpeg, Raw (Dng) | Video Formats: Mp4, H.264/H.265, Supports Vertical Video Capture, Panorama Modes: Sphere, 180°, Wide Angle, Vertical, Remote Controller- 5.5-Inch Fhd Screen With A Resolution Of 1920×1080 Pixels, 60Hz Refresh Rate, And 700 Nits Brightness. Supports 10-Point Multi-Touch,Up To 1080P/60Fps Live Feed When The Aircraft Is In Photo Or Video Mode,4 Antennas, 2T4r (Two Transmitters, Four Receivers), Two Built-In Antennas And Two External Antennas With Manual Angle Adjustments For Optimal Video Transmission,Supports Quick Charging , Copier Machine: Preffered Make: Canon, Xerox, Ricoh Main Unit -Machine Type-A3 Monochrome Laser Multifunctional; Core Functions-Print, Copy, Scan, Send And Optional Fax; Processor Speed 1.6Ghz Dual Core Processor; Control Panel Standard: 7 Inch Tft Lcd Wvga Colour Touch Panel; Memory Standard: 2.0Gb Ram; Storage Standard: 64Gb Emmc,Optional: 256Gb Ssd; Interface Connection- Network Standard: 1000Base-T/100Base-Tx/10-Base-T, Wireless Lan (Ieee 802.11 B/G/N), Wi-Fi Direct Connection Others Standard: Usb 2.0 (Host) X2, Usb 2.0 (Device) X1; Paper Input (Standard); Paper Supply Capacity (A4, 80 Gsm)-Standard: 1,200 Sheets Maximum: 2,300 Sheets (With Cassette Feeding Unit-Aw1); Paper Output Capacity (A4, 80 Gsm)-Standard: 250 Sheets Maximum: 645 Sheets (With Inner Finisher-L1 And Copy Tray-T2); Finishing Capabilities -Collate, Group, Offset, Staple, Hole Punch, Eco Staple, Staple On Demand; Supported Media Types- Main Body Cassette (Upper/Lower): Thin, Plain, Recycled, Color, Heavy, Bond, Pre-Punched, Letterhead, Postcard Multi-Purpose Tray:Thin, Plain, Recycled, Color, Heavy2, Bond, Pre-Punched, Letterhead, Postcard, Labels, Coated, Tracing;Supported Media Sizes-Upper Cassette: Standard Size: A4, A5, A5r, A6r, B5custom Size: 105.0 X 148.0 Mm To 297.0 X 215.9 Mm Lower Cassette: Standard Size: A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r, Com 10 No. 10*, Monarch*, Dl* Custom Size: 105 X 148 Mm To 304.8 X 457.2 Mm; Supported Media Weights -Main Body Cassette (Upper/Lower): 52 To 256 Gsm Multi-Purpose Tray: 52 To 300 Gsm Duplex: 52 To 220 Gsm; Warm-Up Time -4 Seconds Or Less From Sleep Mode: 10 Seconds Or Less From Power On: 10 Seconds Or Less; Dimensions (W X D X H)- 565 X 687 X 891 Mm; Installation Space (W X D)-1,286 X 1,116 Mm (With Dadf-Ba1 + Inner Finisher Tray Max Extended + Copy Tray-T2 Max Extended + Paper Cassette Opened; Weight -Approx. 66 Kg Print Specifications-Print Speed:Up To 45 Ppm (A4, A5, A5r, A6r), Up To 22 Ppm (A3), Up To 32 Ppm (A4r),Print Resolution (Dpi):Up To 1200 X 1200;Page Description Languages;Standard: Ufrii, Pcl6, Optional: Adobe Postscript 3Tm; Double-Sided Printing: Yes; Direct Print: Pdf, Eps, Tiff/Jpeg, Xps; Mobile / Cloud Printing: Airprint, Mopria, Canon Print Business, Uniflow Online And Universal Print By Microsoft; Fonts : Ps Fonts: 136 Roman Pcl Fonts: 93 Roman, 10 Bitmap Fonts, 2 Ocr Fonts, Andalé Mono Wt J/K/S/T (Japanese, Korean, Simplified And Traditional Chinese) , Barcode Fonts Print Features: Secure Print, Secure Watermark, Header/Footer, Page Layout, Duplex Printing, Mixed Paper Sizes/ Orientations, Toner Reduction, Poster Printing, Forced Hold Printing, Print Date, Scheduled Printing, Printing Using A Virtual Printer Operating Systems :Ufrii: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022, Mac Os X (10.13 Or Later) Pcl: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022 Ps: Windows 10/11/Server2012/Server2012 R2/Server2016/Server2019/Server2022, Mac Os X (10.13 Or Later) Ppd: Windows 10/11, Mac Os X (10.13 Or Later) Copy Specifications :Copy Speed Up To 45 Ppm (A4, A5, A5r, A6r), Up To 22 Ppm (A3), Up To 32 Ppm (A4r),First-Copy-Out Time:5.3 Seconds; Copy Resolution (Dpi):600 X 600; Multiple Copies: Up To 999 Copies; Copy Density: Automatic Or Manual (9 Levels); Magnification:25% - 400% (1% Increments); Preset Reductions: 25%, 50%, 70%, 100% (1:1), 141%, 200%, 400%; Preset Enlargements:25%, 50%, 70%, 100% (1:1), 141%, 200%, 400%; Basic Copy Features: Preset R/E Ratios By Area, Two-Sided, Density Adjustment, Original Type Selection, Interrupt Mode, Book To Two Pages, Two-Sided Original, Sort, Job Build, N On 1, Different Size Originals, Sharpness, Erase Frame, Copy Id Card, Skip Blank Pages, Free Size Original, Color Mode, Reserved Copy, Copy Sample; Scan Specifications:Type: Color Scanner; Pull Scan Specifications: Colour Network Scangear2. For Both Twain And Wia Supported Os: Windows 10/11/Server2012/Server2012 R2/Server 2016/Server 2019/Server2022; Scan Resolution (Dpi): Scan For Copy: 600 X 600 Scan For Send: (Push) 600 X 600 (Smb/Ftp/Webdav/Ifax), (Pull) 600 X 600 Scan For Fax: 600 X 600; Document Feeder Paper Capacity (80 Gsm): Up To 100 Sheets; Acceptable Originals/Weights: Platen: Sheet, Book, 3-Dimensional Objects Document Feeder Sheet Media Weight : 1-Sided Scanning: 38 To 128 Gsm (Bw), 64 To 128 Gsm (Cl) 2-Sided Scanning: 50 To 128 Gsm (Bw), 64 To 128 Gsm (Cl); Supported Media Sizes: Platen: Max. Scanning Size: 297.0 X 431.8 Mm Dadf: A3, A4, A4r, A5, A5r, B4, B5, B5r, B6, Custom Size: 139.7 X 128.0 Mm To 297.0 X 431.8 Mm; Scan Method:Push Scan, Pull Scan, Scan To Network, Scan To Usb Memory Key, Scan To Mobile Device, Scan To Cloud-Based Services (Uniflow Online); Scan Speed:1-Sided Scanning: 70/70 (300 X 300 Dpi, Send), 51 /51 (600 X 600 Dpi, Copy) 2-Sided Scanning: 35/35 (300 X 300 Dpi, Send), 25.5 /25.5 (600 X 600 Dpi, Copy); Double-Sided Scanning: Yes;Supported Media Sizes: Platen: Max. Scanning Size: 297.0 X 431.8 Mm Dadf: A3, A4, A4r, A5, A5r, B4, B5, B5r, B6, Custom Size: 139.7 X 128.0 Mm To 297.0 X 431.8 Mm; Scan Method:Push Scan, Pull Scan, Scan To Network, Scan To Usb Memory Key, Scan To Mobile Device, Scan To Cloud-Based Services (Uniflow Online); Scan Speed:1-Sided Scanning: 70/70 (300 X 300 Dpi, Send), 51 /51 (600 X 600 Dpi, Copy) 2-Sided Scanning: 35/35 (300 X 300 Dpi, Send), 25.5 /25.5 (600 X 600 Dpi, Copy); Double-Sided Scanning: Yes; Send Specifications- Optional / Standard-Destination: Standard: E-Mail/Internet Fax (Smtp), Smb3.1.1, Ftp, Webdav,Optional: Super G3 Fax;Address Book / Speed Dials: Ldap (2,000)/ Local (1,600) /Speed Dial (200); Send Resolution (Dpi):Push: Up To 600 X 600 Pull: Up To 600 X 600; Communication Protocol: Ftp (Tcp/Ip), Smb3.1.1 (Tcp/Ip), Webdav Email/Ifax: Smtp(Send), Pop3(Receive); File Format: Standard: Tiff (Mmr), Jpeg Pdf (Compact, Searchable, Pdf/A-1B, Encrypted), Xps(Compact, Searchable), Pdf/Xps (Device Signature, Office Open Xml (Powerpoint, Word) Optional: Pdf (Trace & Smooth), Pdf/Xps (User Signature); Universal Send Features:Original Type Selection, Two-Sided Original, Book To Two Pages, Different-Size Originals, Density Adjustment, Sharpness, Erase Frame, Job Build, Delayed Send, Preview, Job Done Notice, File Name, Subject/Message, Reply-To, E-Mail Priority, Tx Report, Original Content Orientation; Fax Specifications- Optional; Modem Speed: Super G3: 33.6 Kbps G3: 14.4 Kbps; Compression Method: Mh, Mr, Mmr, Jbig; Resolution (Dpi):200X100dpi (Standard), 200X200dpi (Fine), 200X400 Dpi (Super Fine), 400X400 Dpi (Ultra Fine); Sending/Receiving Size: Sending: A3, A4, A4r, A5*1, A5r*1, B4, B5*2, B5r*1 Receiving: A3, A4, A4r, A5r, B4, B5, B5r *1 Sent As A4. *2 Sent As B4 Short.; Fax Memory: Up To 30,000 Pages (2,000 Jobs); Fax Features:Senders Name (Tti), Selecting The Telephone Line (When Sending Fax), Direct Send, Delayed Send, Preview, Finished Stamp, Job Done Notice, Tx Report, Interrupt Transmission, Sequential Broadcasting, Password/Sub-Address Sending, Confidential Mailbox Store Specifications- Memory Media: Standard: Usb Memory, Security Specifications; Authentication & Access Control: User Authentication(Picture Login, Picture And Pin Login, Username And Password Login, Function Level Login, Mobile Login), Department Id Authentication(Depertment Id And Pin Login, Function Level Login), Uniflow Online (Pin Login, Picture Login, Picture And Pin Login, Card Login, Card And Pin Login, Username And Password Login, Depertment Id And Pin Login, Function Level Login), Access Management System(Access Control);Network Security:Tls 1.3, Ipsec, Ieee802.1X Authentication, Snmpv3, Firewall, Functionality(Ip/Mac Address Filtering), Wpa3 Support (Wi-Fi), Dual Network Support(Wired Lan/Wireless Lan, Wired Lan/Wired Lan), Enabling/Disabling(Network Applications, Remote Ui, Usb Interface), G3 Fax Separation From Lan, Usb Port Separation From Lan, Scan And Send -Virus Concerns For E-Mail Reception Document Security -Print Security(Secure Print, Encrypted Secureprint, Forced Hold Printing, Uniflow Secure Print 1),Receive Data Security(Confidential Fax Inbox Forwarding Received Documents Automatically), Scan Security (Encrypted Pdf, Device Signature Pdf/Xps, User Signature Pdf/Xps112), Send Data Security(Setting For Requesting Password Input Per Transmission, Restricted E-Mail/File Send Functions, Confirming Fax Number, Allow/Restrict Fax Driver Transmissions, Allow/Restrict Sending From History, S/Mime Support) Environmental Specifications- Operating Environment: Temperature: 10 To 30 °C (50 To 86 °F);Humidity: 20 To 80 % Rh (Relative Humidity); Power Source: Eur: 220-240V 50/60Hz 10A; Power Consumption: Maximum: Approx. 1,500W,Copying (With Dadf Continuous Scan): Approx. 666W (220-240V)*1,Standby: Approx. 28.1W (220-240V)*1,Sleep Mode: Approx. 0.8W*2,* 0.8W Is Not Available In All Circumstances Due To Certain Settings.,*1 Reference Value: Measured One Unit,*2 0.8W Is Not Available In All Circumstances Due To Certain Settings.,Typical Electricity Consumption (Tec): 0.48 Kwh*,*As Per Energy Star Version 3.0 Software & Printer Management- Tracking & Reporting: Uniflow Online; Remote Management Tools: Iw Enterprise Management Console Emaintenance Content Delivery System; Scanning Software: Network Scangear;Toner Cartridge/S: Toner C-Exv 67 Black; Toner Estimated Yield:33,000 Pages (A4), (Estimated @ 6% Coverage); Cassette Feeding Unit:Cassette Feeding Unit-Aw1: Paper Capacity: 550 Sheets X 2 (1,100 Sheets) (80 Gsm), Paper Type: Thin, Plain, Recycled, Color, Heavy, Bond, Transparency, Pre-Punched, Letterhead Paper Size: A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r,Custom Size: 105.0 X 148.0 Mm To 304.8 X 457.2 Mm,Paper Weight: 52 To 256 Gsm,Power Source: From The Main Unit Dimensions (W X D X H): 565 X 635 X 248 Mm,Weight: Approx. 16.0 Kg Output Options- Copy Tray: Check For Impacted Products.; Copy Tray:Inner 2Way Tray-M1:Tray Capacity (With 80 Gsm Paper):Upper Tray: Sra3, A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r: 100 Sheets,Lower Tray (Standard Tray): A4, A5, A5r, A6r, B5, B5r: Up To 250 Sheets,Sra3, A3, A4r, B4: Up To 100 Sheets Paper Weight: 52 To 300 Gsm, Dimensions (W X D X H): 428 X 405 X 88 Mm,Weight: Approx. 0.7 Kg, Inner 2-Way Tray-Copy Tray-T2:Capacity (80Gsm Paper):A4, A5r, B5, B5r: 100 Sheets,A3, A4r, B4: 65 Sheets,Dimensions (W X D X H): 444 × 373 × 176 Mm (Attached To The Main Unit, When The Extension Tray Is Extended),Weight: 0.5 Kg, Inner Finisher - Inner Finisher-L1:Upper Tray: Sra3, A3, A4, A4r, A5, A5r, A6r, B4, B5, B5r: Approx. 45 Sheets,Lower Tray: A4, A5, A5r, B5: Approx. 500 Sheets Sra3, A3, A4r, B4, B5r: 250 Sheets,A6r: 30 Sheets,Envelope: 10 Sheets Paper Weight: 52 To 300 Gsm,Staple Position: Corner, Double,Staple Capacity: A4, B5: 50 Sheets (52 To 90 Gsm),A4r: 40 Sheets (52 To 90 Gsm),A3, B4: 30 Sheets (52 To 90 Gsm),Eco Staple: A3, A4, B4, B5: 10 Sheets (52 To 64 Gsm)/8 Sheets (65 To 81.4 Gsm)/6 Sheets (82 To 105 Gsm),Staple On Demand: Approx. 40 Sheets (80 Gsm) Dimensions (W X D X H): 727 × 525 × 225 Mm (Attached To The Main Unit, When The Extension Tray Is Extended),Weight: Approx. 9.1 Kg Hardware Accessories- Card Readers: Ic Card Reader Attachment-B4 Attachment Kit For Reader-A2; Print Accessories- Pcl International Font Set-A Ps Printer Kit-Bt1; Send Options: Universal Send Trace & Smooth Pdf Kit-A1 Universal Send Digital User Signature Kit-C1; Barcode Printing: Barcode Printing Kit-D1; , Audio Accessories-Ahuja Wired Mikes , Audio Accessories-Ahuja Cordless Mikes , Audio Accessories-Mike Stand (Tall And Small), , Audio Accessories-Cordless Mike Holder Cap, , Audio Accessories-Wired Mike Holder Cap , Audio Accessories-Jack To Jack Wired , Audio Accessories-3 Pin Xlr Male To Xlr Female , Audio Accessories-Universal Aaa And Aa Battery Recharger Adapter , Audio Accessories-Aa Recharge Batteries, Aaa Recharge Batteries , Audio Accessories-Mains Power Cable Cords
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Private Organizations No of Bidders 3
Goa View Result →
35.
Information and Broadcasting #10811892 Price Bid
Tender For E-Tender For The Supply, Installation, Integration, Testing, And Commissioning Of Equipment, Computer Hardware, Software, And Accessories For Cinematography, Digital Intermediate, Audiography, Direction & Screenplay Writing, Film Editing, And Animation & Visual Effects Sections, On Academic Pricing On Turnkey Basis, Along With Comprehensive Onsite Warranty For Three (3) Years , Direction And Screenplay Writing Section - Equipment Requirements , Smart Tvpc Dell Pro Max Tower T2 - Intel Core Ultra 9 285 (36 Mb Cache, 24 Cores, 24 Threads, 1.9 Ghz To 5.6 Ghz, 65W), 64Gb (2 X 32 Gb) Ddr5 (5600 Mt/S, Non-Ecc), Nvidia Geforce Rtx 5090 32Gb Gddr7, 3Xdp, 1Xhdmi, 1Tb Ssd Tlc With Dram M.2 2280 Pcie Gen4 Sed Ready/ Dell Pro Max Tower T2 With 1500W (80 Plus Platinum) Psu V2 /Windows 11 Pro / 5 Yrs Support , Smart Tv Sony Bravia 3 Series 189 Cm (75 Inches) 4 K Ultra Ai Smart Led Google Tv , Mac Studio M3 Mac Studio, Apple M3 Ultra Chip 28-Core Cpu With 20 Performance Cores And 8 Efficiency Cores 60-Core Gpu Hardware-Accelerated Ray Tracing 32-Core Neural Engine 819Gb/S Memory Bandwidth, 256Gb Unified Memory, 2Tb Ssd, Keyboard & Mouse , External Hard Drive Seagate One Touch 20Tb Usb 3.0 Portable Hdd , Printer Hp Laserjet Mfp M438Dn Multi-Function Monochrome Laser Printer (Toner Cartridge) , Directors Viewfinder Alan Gordan Enterprises Mark Vb Directors View Finder , Video Assist Monitors Blackmagic Video Assist 5 3G 5-Inch Full Hd Lcd Touchscreen 3G-Sdi And Hdmi Inputs/Outputs Supports Up To 1080P60 Recording , Final Draft Final Draft Software Full License (Industry Standard With Life Time License) , Continuity Camera / Script Notes Camera Canon Eos R50 Mirrorless Camera Body With Rf - S 18 - 45 Mm F/4.5 - 6.3 Is Stm , Walkie-Talkies, Head Phones (Sets) Aspera V-9 License Free Walkie Talkie With Standard Accessories Viz Battery, Belt Clip, Rapid Charger And Adaptor, Helifex Antenna, User Manual. , Portable Bluetooth/Monitor Speakers (On-Set Use) Jbl Xtreme 3, Wireless Portable Bluetooth Speaker, Pro Sound With Powerful Bass Radiators, Built-In Powerbank, Partyboost, Ip67 Water & Dustproof, Aux & Type C (Blue, Without Mic) , Digital Clap Board Tribe7 Blackslate7 7.5 Clapperboard E-Image Cb-03 Advanced , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Digital Intermediate Section - Equipment Requirements , Software Davinci Resolve Software Studio Version , Software Adobe Package Software (1 Year Subscription Yearly To Be Renewed) , Software Easy Dcp Software For Resolve , Color Correction Panel Black Magic Design Davinci Resolve Mini Panel , Color Correction Panel Black Magic Design Davinci Resolve Micro Panel , Imac Mac Studio, Apple M3 Ultra Chip 28-Core Cpu With 20 Performance Cores And 8 Efficiency Cores 60-Core Gpu Hardware-Accelerated Ray Tracing 32-Core Neural Engine 819Gb/S Memory Bandwidth, 256Gb Unified Memory, 2Tb Ssd, Keyboard & Mouse With 1-Year Support , Imac Imac, Apple M4 Chip 10-Core Cpu With 4 Performance Cores And 6 Efficiency Cores 10-Core Gpu Hardware-Accelerated Ray Tracing 16-Core Neural Engine 120Gb/S Memory Bandwidth, 2Tb Ssd, 32Gb Unified Memory, 60.96 Cm (24″) 4.5K Retina Display 4480X2520 Resolution At 218 Pixels Per Inch With Support For 1 Billion Colours With 1-Year Support , Imac Mac Keyboard And Mouse Usb Hub 50000 X 1 No. , Dell Tower Work Stations Dell Pro Max Tower T2 / Intel Core Ultra 9 285 (36 Mb Cache, 24 Cores, 24 Threads, 1.9 Ghz To 5.6 Ghz, 65W) / 64Gb: 2 X 32 Gb, Ddr5, 5600 Mt/S, Non- Ecc / Nvidia Geforce Rtx 5090 32Gb Gddr7 3Xdp 1Xhdmi / 1Tb Ssd Tlc With Dram M.2 2280 Pcie Gen4 Sed Ready / Dell Pro Max Tower T2 With 1500W (80 Plus Platinum) Psu V2 / Windows 11 Pro / 5Yrs Support , Dell Tower Work Stations Logitech Mk120 Usb Keybord And Mouse , Dell Tower Work Stations Photoshop System 1 Year Licence Subcription To Be Renewed Annually , Monitor Dell Pro 27 Plus 4K Usb-C Hub Monitor - P2725Qe , Monitor Dell Pro 27 Plus Monitor - P2725H / 5Y Basic Advanced Exchange Service , Monitor Eizo Cg319X-4K / 31.1 Inches,4096X2160,350Cd/M2,Dp,Hdmi,Adobe Rgb, Built In Sensor , Tv Sony Bravia 4K Uhd Tv 65Inch , External Hard Disk Samsung Ssd 4 Tb External Hdd , External Hard Disk Seagate One Touch Backup Plus 5Tb Hdd External , Di Equipments Blackmagic Design Capture, Card Ultrastudio 4K Mini , Di Equipments Black Magic Design Ultrastudio Monitor 3G For Mac 15000 X 4 Nos , Di Equipments Black Magic Design Link Card 4K Extreme 12G , Speaker & Headphones Jbl Stage 260F, Stage 245C, Stage 240H, Stage 200P + Denon Avrx- 250 Bituminous Av Receiver 5.1 Home Theatre , Speaker & Headphones Jbl Sb180 Speakers , Speaker & Headphones Akg K52 Headphones , Accessories Wacom Intuos Bluetooth Ctl-6100/K0-Cx Digital Graphics Pen Tablet For Drawing (Black) Medium (10.4-Inch X 7.8-Inch) , Accessories Hdmi 2.1 -5 Metres , Accessoriest Thunderbolt 4(Usb-C) Pro Cable (3 Metres) , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Animation & Visual Effects - Equipment Requirements , System Lenovo Think Station Px Workstation | 2 X Intel Xeon Gold 5420+ Processor (2.00 Ghz Up To 4.10 Ghz) | 4 X 128 Gb Ddr5-4800Mt/S (Rdimm, Ecc) | 4 X 12 Tb 7200Rpm Hdd 3.5 Sata Enterprise | Nvidia Rtx A6000 48Gb | Intel Eagle Stream C741 Dual Processor Motherboard | Raid 10 (4 Drives Min) | 1 X 1 Tb Ssd M.2 2280 Pcie Gen4 Performance Tlc Opal | 1 X 4 Tb Ssd M.2 2280 Pcie Gen4 Performance Tlc Opal | Integrated Ethernet | 2 X Thermal Kit 250W | Windows 11 Pro 64Bit Pre-Loaded | Wired Keyboard & Mouse | 3 Years Onsite Warranty / Dell Ultrasharp 27 4K Thunderbolt Hub Monitor - U2725Qe , System Dell Pro Max Tower T2 / Intel Core Ultra 9 285 (36 Mb Cache, 24 Cores, 24 Threads, 1.9 Ghz To 5.6 Ghz, 65W) / 64Gb: 2 X 32 Gb, Ddr5, 5600 Mt/S, Non-Ecc / Nvidia Geforce Rtx 5090 32Gb Gddr7 3Xdp 1Xhdmi / 1Tb Ssd Tlc With Dram M.2 2280 Pcie Gen4 Sed Ready / Dell Pro Max Tower T2 With 1500W (80 Plus Platinum) Psu V2 / Windows 11 Pro / 5Yrs Support , System Dell Pro Max Tower T2 / Intel Core Ultra 9 285 (36 Mb Cache, 24 Cores, 24 Threads, 1.9 Ghz To 5.6 Ghz, 65W) / 64Gb: 2 X 32 Gb, Ddr5, 5600 Mt/S, Non-Ecc / Nvidia Geforce Rtx 5070 12Gb Gddr7 3Xdp 1Xhdmi / 1Tb Ssd Tlc With Dram M.2 2280 Pcie Gen4 Sed Ready / Dell Pro Max Tower T2 With 1500W (80 Plus Platinum) Psu V2 / Windows 11 Pro / 5Yrs Support , Software Adobe Creative Cloud All Apps Education Named Subscription License , Software Ai Tools (Google Flow) , Software Davinci Fusion Studio Annual-Commercial , Software Cine Tracer , Software Autodesk Maya Subscription New- Commercial , Software Houdini Academic License , Software Nuke Studio 1-Year Subscription , Laptop Dell Pro Max 16 (Mc16250) Xcto Base / Intel Core Ultra 5 235H, Vpro Enterprise (18Mb, 14 Cores, 14 Threads, Up To 5.00 Ghz Turbo, 45W) / 16Gb: 2X8Gb, Ddr5, 5600 Mt/S, Sodimm, Dual Channel, Non-Ecc / Nvidia C64 Rtx Pro 1000 Blackwell 8Gb Gddr7 / 16 Fhd+ Lcd With 300 Nits, Non- Touch, Fhd Hdr Rgb Camera, Microphone, Wlan / Intel Wi-Fi 6E Ax211, 2X2, 802.11Ax, Bluetooth 5.3 Wireless Card / 512Gb, M.2 2230, Gen4 Pcie Nvme, Ssd, Class 35 / 130W Ac Adapter, Type C (Tco10) / Windows 11 Home / 5Yrs Prosupport Nbd , Smart Tv Smart Tv-32 Inch , Moniters Dell Pro 27 Plus 4K Usb-C Hub Monitor - P2725Qe / 3Y Basic Advanced Exchange Service , Other Equipments Logitech Mk120 Usb Keybord And Mouse , Other Equipments Xp-Pen-Deco01 V3 , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Film Editing - Equipment Requirements , Apple Imac Machines Imac, Apple M4 Chip 10-Core Cpu With 4 Performance Cores And 6 Efficiency Cores 10-Core Gpu Hardware-Accelerated Ray Tracing 16- Core Neural Engine 120Gb/S Memory Bandwidth, 2Tb Ssd, 32Gb Unified Memory, 60.96 Cm (24″) 4.5K Retina Display 4480X2520 Resolution At 218 Pixels Per Inch With Support For 1 Billion Colours With 1-Year Support , Mac Studio M3 Mac Studio, Apple M3 Ultra Chip 28-Core Cpu With 20 Performance Cores And 8 Efficiency Cores 60-Core Gpu Hardware-Accelerated Ray Tracing 32-Core Neural Engine 819Gb/S Memory Bandwidth, 256Gb Unified Memory, 2Tb Ssd, Keyboard & Mouse , Apple Cinema Display 27 Apple Studio Display 5K Retina Display 68.29 Cm / 27 (Diagonal) 5K Retina Display 5120X2880 Resolution At 218 Pixels Per Inch 600 Nits Brightness Support For 1 Billion Colours Wide Colour (P3) True Tone Technology With 1-Year Support , Sennheiser Headphones Hd 280 , Jbl Studio Jbl Monitors/Speakers , External System Connected Ssd External Wd 1Tb Drive , Licenses For Each Software Avid Media Composer Edu 1-Year Subscription New License , Licenses For Each Software Davinci Resolve Software , Licenses For Each Software Fcp Studio , Licenses For Each Software Adobe Premiere Pro Academic License 1-Year Subscription - 3 Nos. , External Backup Hard Drive Wd My Book Backup Drive - 12 Tb , Keyboard/ Mouse Logitech Mk120 Usb Keybord And Mouse , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Audiography - Equipment Requirements , Dubbing/Mixing Room - Hardware And Software Protool Ultimate Edu Subscription For Student/Teacher - New , Dubbing/Mixing Room - Hardware And Software Dolby Atmos Renderer , Dubbing/Mixing Room - Hardware And Software Pace Ilok 3 Usb - C Type , Dubbing/Mixing Room - Hardware And Software Merging Techologies Hapi Mkiii , Dubbing/Mixing Room - Hardware And Software Merging Technologies Ada8V3S 8 Ch Mic/Line Ad&Da 192 Khz , Dubbing/Mixing Room - Hardware And Software Merging Technologies Anubis Pro Sps , Dubbing/Mixing Room - Hardware And Software Avid S1 (Includes 1 Year Hw Warranty) , Dubbing/Mixing Room - Hardware And Software Avid S1 Extended Hw Support - Second Year , Dubbing/Mixing Room - Hardware And Software Avid Dock , Dubbing/Mixing Room - Hardware And Software Focusrite Isa428 Mkii 4-Channel Microphone Preamp , Dubbing/Mixing Room - Hardware And Software Apple Mac Studio M3 Ultra Chip With 28-Core Cpu, 60-Core Gpu, 32-Core Neural Engine, 96Gb Unified Memory, 1Tb Ssd Storage, Macos , Dubbing/Mixing Room - Hardware And Software Applecare+ For Mac Studio (M4 Max / M3 Ultra) , Dubbing/Mixing Room - Hardware And Software Sonnet Rackmac Studio Enclosure - 3U Pro Rackmount Enclosure To Install And Secure One Or Two Mac Studio Computers In A Standard 19-Inch Rack , Dubbing/Mixing Room - Hardware And Software Logic Pro - Professional Music Production , Dubbing/Mixing Room - Hardware And Software Steinberg Nuendo 14 - Software (Standard) , Dubbing/Mixing Room - Hardware And Software Benq 27 Inch 1080P Fhd Ips Monitor|Height Adjustable - 3 Year Warranty (2 Display For Each System) , Dubbing/Mixing Room - Hardware And Software Samsung 65 Tv For Console Room - 1.63 M (65) Crystal 4K Uhd Smart Tv , Dubbing/Mixing Room - Hardware And Software Samsung 55 Tv For Console Room - 1.38 M (55) Crystal 4K Uhd Smart Tv , Dubbing/Mixing Room - Hardware And Software Lg 4K Uhd Hybrid Projector , Dubbing/Mixing Room - Hardware And Software Motorised Projector Screen, 10 X 8 Feet, 150 Diag, 4:3 Aspect Ratio, 1080P-3D-4K With Remote , Dubbing/Mixing Room - Hardware And Software Logitech Mx Keys S Performance Combo - Black (Incl Mx Master 3S, Mx Keys S & Mx Palm Rest) , Dubbing/Mixing Room - Hardware And Software Blackmagic Design Ultrastudio Monitor 3G Sdi/Hdmi Playback Device , Dubbing/Mixing Room - Hardware And Software Thunderbolt 3 Cable (6.6, 40 Gb/S, Active) , Dubbing/Mixing Room - Hardware And Software Usb-C Digital Av Multiport Adapter (1 For Each System) , Dubbing/Mixing Room - Hardware And Software Usb C Hub 10Gbps 6-In-1 Multiport Adapter With 4K@60Hz Hdmi, Type A& C 3.2 Data Ports, 100W Pd For Mac , Dubbing/Mixing Room - Hardware And Software Tt0080831/ Netgear Av Line M4250-12M2Xf 12X2.5G And 2Xsfp+ Managed Switch , Dubbing/Mixing Room - Hardware And Software Izotope Rx 11 Standard , Dubbing/Mixing Room - Hardware And Software Mcdsp Sa2 Dialog Processor , Dubbing/Mixing Room - Hardware And Software Waves Diamond Bundle , Dubbing/Mixing Room - Hardware And Software Fab Filter Mixing Bundle , Dubbing/Mixing Room - Hardware And Software Audio Design Desk Subscription (2 Years) , Dubbing/Mixing Room - Hardware And Software Nugen Loudness Toolkit-2 , Dubbing/Mixing Room - Hardware And Software Sis Edicue , Dubbing/Mixing Room -Mics And Speakers Neumann Ma 1 Monitor Alignment Microphone And Calibration System , Dubbing/Mixing Room -Mics And Speakers Multi-Channel Extension For Neumann Ma 1 System Software , Dubbing/Mixing Room -Mics And Speakers Neumann Kh 150 Dsp Powered Studio Monitor , Dubbing/Mixing Room -Mics And Speakers Height Adjustable Stands For Neumann Kh 150 , Dubbing/Mixing Room -Mics And Speakers Neumann Kh 120 Ii Dsp Powered Studio Monitor (4 For Surrounds & 4 For Tops) , Dubbing/Mixing Room -Mics And Speakers Neumann Lh 32 Wall Mounts With Pan And Tilt (4 For Surrounds & 4 For Tops) , Dubbing/Mixing Room -Mics And Speakers Neumann Kh 870 Ii Dsp Dual 10 Studio Subwoofer , Dubbing/Mixing Room -Mics And Speakers Neumann Kh 310 3-Way Reference Studio Monitors Pair (Left And Right) , Dubbing/Mixing Room -Mics And Speakers Kali Lp 6 (Talk Back Speaker Pair For Recording Booth) , Dubbing/Mixing Room -Mics And Speakers Sennheiser Hd 200 Pro Closed-Back Studio Headphones , Dubbing/Mixing Room -Mics And Speakers Neumann Tlm 103 Stereo Set- Nickel (2 X Tlm 103 Ni + Ea1 In Aluminium Case) , Dubbing/Mixing Room -Mics And Speakers Sennheiser E945 Supercardioid Dynamic Vocal Microphone , Dubbing/Mixing Room -Mics And Speakers Rs-719 Heavy Duty Microphone Boom Stand , Dubbing/Mixing Room -Mics And Speakers Rs-521 Medium Weight Notepad/Lyric Stand , Dubbing/Mixing Room -Mics And Speakers Presonus Hp4 Headphone Annual Periodical Maintenance , Dubbing/Mixing Room -Mics And Speakers Promise Pegasus R4 16 Tb Raid With 3 Years Warranty , Dubbing/Mixing Room -Mics And Speakers Rs T3 Pop Shield , Dubbing/Mixing Room -Mics And Speakers 4-Port Professional Hdmi 4K Automatic Video Switch With Fast Switching , Dubbing/Mixing Room -Mics And Speakers Audio Cables And Connectors (Set) And Testing And Calibration , Dubbing/Mixing Room -Mics And Speakers Audio Rack - Black Color With 7 Pairs L Angle With Screws & Nuts & 15 Amps Power Supply With Side Panel And Heavy Duty Wheels , Dubbing/Mixing Room -Mics And Speakers Active Optical Hdmi Cable 25M , Dubbing/Mixing Room -Mics And Speakers Heavy Duty Cat6 Cable 25M , Dubbing/Mixing Room -Mics And Speakers Usb 2.0 Extender Over Cat5E/Cat6 Cable (Rj45) - Up To 165Ft (50M) - High Speed Usb Port Extender Adapter Kit - Powered , Edit Suite- Hardware And Software Pro Tools Studio Annual Paid Annual Subscription Edu , Edit Suite- Hardware And Software Pace Ilok 3 Usb-C Type , Edit Suite- Hardware And Software Neumann Mt 48 Usb-C Audio Interface , Edit Suite- Hardware And Software Neumann Ndh 20 , Edit Suite- Hardware And Software Neumann Kh 80 Dsp Powered Studio Monitor , Edit Suite- Hardware And Software Apple Mac Mini Apple M4 Chip With 10‑Core Cpu, 10‑Core Gpu, 16‑Core Neural Engine, 32Gb Unified Memory, 512Gb Ssd Storage , Edit Suite- Hardware And Software Applecare+ For Mac Mini (M4) , Edit Suite- Hardware And Software Sonnet Rackmac Mini (2024+) - 2U Enclosure To Mount And Secure Up To Three Mac Minis In A Standard 19-Inch Rack , Edit Suite- Hardware And Software Logic Pro - Professional Music Production , Edit Suite- Hardware And Software Neumann Rime Immersive Binaural Monitoring Plug-In , Edit Suite- Hardware And Software Waves Diamond Bundle , Edit Suite- Hardware And Software Lacie 4 Tb External Hdd Thunderbolt Connected , Edit Suite- Hardware And Software Logitech Mx Keys S Performance Combo - Black (Incl Mx Master 3S, Mx Keys S & Mx Palm Rest) , Edit Suite- Hardware And Software Benq 27 Inch 1080P Fhd Ips Monitor|Height Adjustable - 3 Year Warranty (2 Display For Each System) , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Inter Connection And Storage Equipment Requirements , Storage Centralized Parking Storage For All Departments: Eonstor Gs 3000 G3 3U/16Bay,Cloud-Integrated Unified Storage, Supports Nas, San, Object Protocol And Cloud Gateway, Dual Redundant Controller Subsystem Including 4X12Gb/S Sas Exp. Ports, 4X25Gbe Ports(Sfp28) +4X Host Board Slots,4X16Gb Memory, 2X(Psu+ Fan Module), 2X(Supercap. + Flash Module), 16Xdrive Trays And 1Xrackmount Kit 32X 3.5 Hdd, Sas 12Gb/S, 22Tb, 7200Rpm 3U/16Bay Dual Redundant Controller Expansion Enclosure Including 4X 12Gb Sas Ports, 2X(Psu+Fan Module), 16Xgs Drive Trays, 2X 12G To 12G Sas Cable For Storage Or Expansion Enclosure With 12G Interface And 1Xrackmount Kit 4X 10G Base-Sr Sfp+ Transceiver, Lc, Multi-Mode 3 Years Standard Warranty , Storage Animation Department Blackmagic Cloud Store 80Tb With 1 Year Limited Manufacturers Warranty. , Storage Digital Intermediate Blackmagic Cloud Store 80Tb With 1 Year Limited Manufacturers Warranty. , Interconnection Dell Switch S4148T-On Dell Switch S4148T-On, 1U, 48 X 10Gbase-T, 4 X Qsfp28, 2 X Qsfp+, Io To Psu, 2Xpsu Dell Networking, Qsa Adapter, Qsfp+/Qsfp28 To Sfp/Sfp+/Sfp28 For Select Optics Only (Total-4Nos) Dell Networking, Transceiver, Sfp+, 10Gbe, Sr, 850Nm Wavelength (Total- 4Nos) Dell Networking Cable 100Gbe, Qsfp28 To Qsfp28, Passive Copper Direct Attach Cable, 1 Meter (Total-4Nos) Dell Networking Cable, Om4 Lc/Lc Fiber Cable, (Optics Required), 10 Meter (Total-4Nos) 5 Yrs Pro Support Nbd. , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Cinematography Requirements , Category A: Cameras & Lenses A1. Photography Kit- 1St Year Camera Body- 1St Year Sony A7R5 Body • 61Mp Full-Frame Exmor R Bsi Cmos Sensor • Bionz Xr & Ai Processing Unit • Ai-Based Real-Time Tracking Af System • 8K 24P, 4K 60P, Fhd 120P 10-Bit Video • 4K 16-Bit Raw Output; S-Log3/S-Cinetone • 9.44M-Dot Evf With 120 Fps Refresh Rate • 3.2 4-Axis Multi-Angle Touchscreen Lcd • 10 Fps Shooting With Af/Ae Tracking • 8-Stop 5-Axis Image Stabilization • Dual Cfexpress Type A/Sd Card Slots , Lcd Guard For Sony A7R5 Lcd Panel Guard , Prime Lens 1- 50Mm Sigma 50Mm F1.4 Dg Dn (E-Mount) Or Equivalent • E-Mount Lens/Full-Frame Format, Aperture Range: F/1.4 To F/16 • One Molded Glass Aspherical Element • Three Special Low Dispersion Elements • Super Multi-Layer Coating • Floating System & Large Diameter Design • Hyper Sonic Af Motor • Rounded Nine-Blade Diaphragm • Thermally Stable Composite Material • Brass Bayonet Mount • Compatible With Sigma Usb Dock , Uv Filter For Sigma 50Mm Lens Meco 72Mm Uv Filter , Prime Lens 2 35 Mm Sigma 35Mm F1.4 Dg Dn (E-Mount) Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/1.4 To F/16 • Five Sld Elements • One Aspherical Element, Four Hr Elements • Super Multi-Layer Coating • Stepping Motor Af System • Customizable Afl Button • Physical Aperture Ring; De-Click Switch • Rounded 11-Blade Diaphragm • Weather-Sealed Design , Uv Filter Sigma 35Mm F/1.4 Lens Meco 67Mm Uv Filter , Prime Lens 3 85 Mm Sigma 85Mm F1.4 Dg Dn (E-Mount) Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/1.4 To F/16 • Five Sld Elements • One Aspherical Element, Four Hr Elements • Super Multi-Layer Coating • Stepping Motor Af System • Customizable Afl Button • Physical Aperture Ring; De-Click Switch • Rounded 11-Blade Diaphragm • Weather-Sealed Desig , Uv Filter Sigma 85Mm F/1.4 Lens Meco 77Mm Uv Filter , Wide Lens 14Mm Sigma 14Mm F1.8 (E- Mount) Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/1.8 To F/16 • Three Fld Elements, Four Sld Elements • Four Aspherical Elements • Super Multi-Layer Coating • Hyper Sonic Af Motor, Manual Override • Rounded 9-Blade Diaphragm • Tsc Material, Brass Bayonet Mount , Zoom Lens 1 24-70Mm Sigma 24-70Mm F 2.8 Dg Dn I (E- Mount) Or Equivalent • Full-Frame | F/2.8 To F/22 • Fast & Lightweight Wide-To-Tele Zoom • Hla Autofocus • 6.7 Minimum Focusing Distance • Aperture Ring With Click & Lock Switches • Fld, Sld & Aspherical Elements • Nano Porous & Super Multilayer Coatings • Dust & Splash Resistant , Uv Filter Sigma 24-70Mm Lens Meco 82Mm Uv Filter , Zoom Lens 2 70-200Mm Sigma 70-200Mm F 2.8Mm Dg Dn Os Sport Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/1.8 To F/16 • Three Fld Elements, Four Sld Elements • Four Aspherical Elements • Super Multi-Layer Coating • Hyper Sonic Af Motor, Manual Override • Rounded 9-Blade Diaphragm • Tsc Material, Brass Bayonet Mount , Uv Filter Sigma 70-200Mm Lens Meco 82Mm Uv Filter , Telephoto Lens 150-600Mm Sigma 150-600Mm F 5-6.3 Dg Dn Os Sport Or Equivalent • Ef-Mount Lens/Full-Frame Format • Aperture Range: F/5 To F/22 • Two Fld Elements, Three Sld Elements • Super Multi-Layer Coating • Hyper Sonic Motor Af System • Os Image Stabilization • Fixed, Rotating Tripod Collar • Rounded 9-Blade Diaphragm , Uv Filter Sigma 150-600Mm Lens Meco 95Mm Uv Filter , Macro Lens 105Mm Sigma 105Mm F 2.8 Dg Dn Macro Art Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/2.8 To F/22 • One Sld Element • Super Multi-Layer Coating • 1:1 Magnification, 11.6″ Min. Focus • Hyper-Sonic Motor Af System • Custom Afl Button, Focus Limiter Switch • Physical Aperture Ring; De-Click Switch • Rounded 9-Blade Diaphragm • Weather-Sealed Desig , Uv Filter Sigma 105Mm F/2.8 Lens Meco 105Mm Uv Filter , Battery Sony Fz100 Battery Or Equivalent ( A7R5 & Fx3A) • Battery Type: High-Capacity Z-Series Rechargeable Lithium-Ion Battery • Voltage / Capacity: 7.2 Vdc / 2280 Mah (16.4 Wh) • Infolithium Feature, Dimensions: Approx. 51.7 × 38.7 × 22.7 Mm (W × H × D) • Weight: Approx. 83 G (3 Ozcompatibility: Supports Dozens Of Sony Cameras Including: O Alpha Series: A1, A1 Ii, A9, A9 Ii, A9 Iii, A7 Iii, A7R Iii, A7R Iv, A7 Iv, A7R V, A7S Iii, A7C, A7 C Ii, A7Cr, A6600, A6700 Cinema/V-Logging: Ilme-Fx3, Zv-E1, Zv-E10 Ii , Battery Charger Sony Dual Charger Bc-Zd1 (A7R5) • Battery Type: High-Capacity Z-Series Rechargeable Lithium-Ion Battery • Voltage / Capacity: 7.2 V / 2280 Mah (16.4 Wh) • Infolithium Support: Displays Remaining Battery Level On Camera Lcd • Compatibility: Sony Alpha Series (E.G., A1 Ii, A9, A7R Iv, A7 Iv, A6600), Zv Series (Zv-E1, Zv-E10 Ii) • Dimensions: Approx. 38.7 × 22.7 × 51.7 Mm (W × H × D) • Weight: Approx. 83 G (3.0 Oz) • Durability & Safety: Built-In Protection Circuitry To Prevent Overcharging/Overheating (Sony Oem) , Category A2. Video Kit Camera Body-1 (2 Year Continuity Project) Sony Fx6 • 4K Full-Frame 10.2Mp Cmos Exmor R Sensor • Dci 4K60P | Uhd 4K120 | 1080P240 • 15+ Stops Of Dynamic Range In S-Log 3 Electrical Installation • 1.3X And 2.0X Anamorphic De-Squeeze • Compact Form Weighs Less Than 2 Lb • Phase Detection Af/Face Tracking/Eye Af • Base 800-12,800 Iso / 320-409,600 Max • S-Cinetone, S-Log3, Hlg Modes • 10-Bit 4:2:2 Xavc-I/16-Bit Raw Output • Dual Cfexpress Type A/Sdxc Card Slots , Camera Body-2 (3Rd Year Song Project) Sony Fx3A • 12.1Mp Full-Frame Cmos Exmor R Sensor • Uhd 4K Up To 120 | 1080P Up To 240 • Compact Form For Cage-Free Operation • 10-Bit 4:2:2 Xavc S-I,16-Bit Raw Output • S-Cinetone/S-Log3/Hlg, 15+ Stops Dr • Detachable 2 X Xlr/Trs Adapter Handle • Phase Detection Af/Face Tracking/Eye Af • 80 To 409,600 Expanded Iso Range • Dual Cfexpress Type A/Sdxc Card Slots , Battery Sony Fz100 Battery , Panel Guard For Sony Fx3A Lcd Panel Guard , Lens Kit 18Mm, 24Mm, 35Mm, 50Mm, 85Mm, And 105Mm (2Nd And 3Rd Year) Dzo Film, Vespid Ii Prime 6-Lens Set Includes 18Mm,24Mm,35Mm,50Mm,85Mm And 105Mm • Full Frame/Vv | T1.9 To T22 Aperture • 18, 24, 35, 50, 85, And 105Mm Primes • Aspherical Element, Reduced Aberrations • 0.8 Mod Gears, 300° Focus Rotation • Cooke /I Technology Metadata • 80Mm Front Outside Diameter • Compact, Lightweight Design • Less Reflective, More Tactile Surface • Color Matched, Common Gearing And Length • Minimal Breathing And Distortion , Gimbal (3Rd Year Song Project) Rs4 Pro Combo • Lightweight Design With 10 Lb Payload • Combo With Focus Pro Motor • Oled Touchscreen With Auto Lock • 2Nd Gen Native Vertical Shooting • Automated Axis Locks • Joystick Or Bluetooth Mode Switching • Supports Wireless Transmitter, Lidar • Teflon-Coated Axes, Activetrack Pro • 13-Hour Operation Time , Battery Sony Bp-U70 Lithium Ion Battery- (Fx6) • Battery Type: Professional Lithium-Ion Battery (Bp-U Series) • Capacity: 72 Wh • Output Voltage: Approximately 14.4 V Dc Nominal (16.4 V Max) • Charging Time: Approximately 150 Minutes Using Sony Bc-U1A/U2A Charger • Compatibility: Select Sony Professional Camcorders Including Pxw-Fs7, Fx6,.. • Dimensions: 41.5 × 84.5 × 69.7 Mm (1.63 × 3.32 × 2.74 In) Weight: Approximately 450 G (15.9 Oz) • Operating Conditions: Discharge: -20 °C To +45 °C (-4 °F To +113 °F); Charge: 0 °C To +40 °C (32 °F To +104 °F) , Battery Charger Sony Dual Battery Charger Bc-U2A Batteries (Fx6) • Battery Compatibility: Supports Sony Bp-U90, Bp- U60, Bp-U60T, And Bp-U30 Lithium-Ion Batteries. • Charging Capacity: Simultaneously Charges Two Batteries, Optimizing Workflow And Reducing Downtime. • Charge Times: Bp-U90: Approximately 190 Minutes. • Ac Input: 100-240 Vac, 50/60 Hz, Suitable For Global Use. • Dc Output: 12 Vdc Via Integrated Cable, Providing 12 V Dc Power Output While Charging One Battery. • Power Output: 12 Vdc At 3 A (36 W) Via Barrel Connector. • Dimensions: 7.0 × 5.4 × 2.1 Inches (177 × 137 × 53.2 Mm). • Weight: 1.4 Lb (620 G). • Operating Temperature: 32 To 113°F (0 To 45°C). • Certifications: Compliant With Iec62368-1 Safety Standard. , Category B: Photography Lights Flash Light 1 Godox V1 Pro S Or Equivalent • Compatible With Sony Adi / P-Ttl • Output: 76Ws • Auto Zoom Control, Zoom Range: 28-105Mm • 2.4 Ghz X Wireless Radio System • Built-In Led Modeling Lamp • Tilts -7 To 120°, Rotates 330° • Round Head, Optional Magnetic Modifiers • 1.5 Sec Recycle Time, Hss Support • Includes Detachable Sub-Flash , Studio Light 1 Godox Ad 600 Pro Or Equivalent • Built-In 2.4 Ghz Wireless X System • Compatible With Most Ttl Systems • 600Ws, 1/256 To 1/1 Power Output • Lithium-Ion Battery Powered • Up To 360 Full-Power Flashes • Flash Duration: 1/220 To 1/10,100 Sec • 1/8000 Sec High-Speed Sync • 0.01-0.9 Sec Recycling Time • 38W Modeling Lamp • Stable Color Temperature Mode , Studio Light 2 Godox Qt 600 Iii Or Equivalent • 600 Ws, 5600K Color Temperature • 0.01-0.9 Sec Recycling • Flash Duration Hss: 1/26,100 Sec • Built-In Wireless X System • 32 Channels, 16 Groups • Optional X1, X2 & Xpro Transmitter • 1/256 To 1/1 Power Range • 40W Led Modeling Lamp , Softbox Octa Softbox Or Equivalent Jenie Beauty Box 105Cm , Light Stand Harison Heavy Light Stand Harison Heavy Light Stand (Set Of 2) , Strip Box Godox Strip Box 35X160 , Beauty Dish Godox W 550 Silver Eauty Dish With Grid Godox Beauty Dish W550 Sliver With Grid (Set Reflector 1 + Grid 1) , Snoot Godox Snoot , Batteries Eneloop 2000Mah Aa Rechargable Batteries (Set Of 4) , Charger Panasonic Bk 3Hcce Aa Charger , Trigger Godox It 30 Trigger With Flash For Sony Works With X Wireless Radio System Compatible With Sony Adi / P-Ttl Frequency: 2.4 Ghz Range: 328 32 Channels; 99 Ids High-Speed, 1St & 2Nd Curtain Sync Runs On Internal Rechargeable Battery Touchscreen Interface Compact & Portable Design Includes Usb-C Cable & Carry Bag , Category C: Camera Accessories (2Nd And 3Rd Year)Tripod-1 Tripod Manfrotto Mt055-X Pro 3 Or Equivalent • Versatile 3-Section Aluminum Tripod • Spreads To Just 3.5 Above The Ground • 63 Max Height • 23.2 Folded Length • Photo/Video Fluid Tripod Head • 15.4 Lb Load Capacity • All-Direction Photo Mode • Pan-And-Tilt Video Mode • Friction Control , Tripod-2 E Image 7080H • Fluid Head With Bowl Size 75Mm. • Plate With Both 1 /4And 3/8Screws , Memory Card Cf Express Type A 240Gb Or Equivalent (A7R5) & Fx6 , Memory Card Angelbird 1Tb Cf Express Type B Or Equivalent (Burano) , Memory Card Sony 480Gb Tough Card Cf Express Type A , Card Reader 1 Sony Mrw-G3 Cf E Type A Card Reader , Card Reader 2 Sony Mrw-G1 Type B Card Reader , Camera Bag Vanguard Veo 49Bf Camera Bag , Hard Case Camera Hard Case (Pelican Type) (Fx6 & Burano) Explore 7635 Hlb Hard Case For Fx6 & Burano , Camera Cage 1 Small Rig Cage For Sony A7R5 Or Equivalent • Formfitting Camera Cage • 1/4-20 & 3/8-16 Accessory Threads • Maintains Access To Cameras Hot Shoe • Arri-Style Locating Handle Included • Built-In Shoe Mounts, Anti-Twist Design • Threads To Mount Optional Accessories • Durable Aluminum Construction , Camera Cage 2 Small Rig Cage For Sony Fx6 Or Equivalent • Camera Top & Side Plates • Quick Release Baseplate • V-Mount Plate With D-Tap Power Cable • Horizontal & Vertical Mounting • 1/4-20 & 3/8-16 Accessory Threads • 3/8-16 Anti-Twist Threads • Durable Aluminum Construction • Baseplate With Folding V-Lock Plate • 15Mm Rod Clamps & 2 X 15Mm Rods , Mattee Box Mattee Box (Fx6 ) • Compact Matte Box Weighing Only 3.8 Oz • Carbon Fiber Box And Top Flag • Includes 4 X 5.65 Filter Tray • Includes 67/72/77/82-95Mm Adapter Rings • Works With Circular Filters Up To 92.5Mm • 2.2 Lb Maximum Load Capacity , Filters H&Y Nd Filters (0.3,0.6 & 0.9) & Uv Filters (Complete Set) • 0.5 To 3.0 Optical Density • Multicoating & Resistance Coating • Schott B270 Optical Glass • Fits 58-77Mm Lens Filter Threads • High-Grade 6063 Aluminum Construction • Size-Adjustable Adapter Ring • Darkens Entire Image Area • Twist To Attach In Seconds , Filters Polariser Filter (Fx6 & Burano) • Minimize Reflections And Glare • Reduces Haze And Blue Cast In Landscapes • Enhances Color And Tonal Saturation • Colorcore Water White Glass , Field Monitor Atomos Shinobi 7 4K Hdmi/Sdi Monitor • 7 1920 X 1200 Touchscreen Display • 4K60 Hdmi 2.0 In/Out, 2K60 3G-Sdi In/Out • 2200 Cd/M² Brightness • Hdmi/Sdi Cross Conversion • 2.5Mm Camera Control Port For Z Cam E2 • Dual Sony L-Series Battery Slots • Atomos; Atomhdr & 3D Lut Support • 10-Stop Dynamic Range • Supports A Variety Of Log Formats , Measuring Laser Distance Meter , Focus Chart , Colour Checker Calibrite Colorchecker Passport Video 2 (Ccppv2) , Cleaning Kit Lens Cleaning Kit (Professional) , Cables 1 Mtr Cable Hdmi To Hdmi , Cables 0.5 Mtr Cable Sdi To Sdi , Cables 5 Mtr Cable Sdi To Sdi , Cables 10 Mtr Cable Sdi To Sdi , Cables 10 Mtr Cable Hdmi To Hdmi , Cables 15 Mtr Cable Hdmi To Hdmi , Category D: Cine-Lineup Cinema Camera (2Nd Year Misc-En & Scene Project) Sony Burano 8K Digital Motion • Compact, Highly Mobile Design • Full-Frame Cmos 8.6K Sensor • 16 Stops Of Dynamic Range • In-Body Image Stabilization|E & Pl Mount • Dual-Base 800/3200 Iso Range • Electronically Variable 0.6-21Nd Filter • Phase Detection Af | Face/Eye Tracking • Full Frame & Super 35 Sensor Modes • Supports Multiple Frame Rates & Codecs • Dual Cfexpress Type B Card Slots , Monitor/ Recorder Shogun Ultra 7 & Recorder • Atomos 11, 12G-Sdi/Hdmi Conversion • 7 1920 X 1080 Touchscreen • Records Up To 8K Apple Prores Raw • Prores Raw + H.265 Dual Recording • Airglu Rf Wireless Sync, Gige, 6E Wi-Fi • 2000 Cd/M² Brightness • Arri/Canon/Red/Sony Camera Sdi Support • Avid Dnx Quicktime • Atomos Remoteview Via Subscription • Optional Ndi 4K Tx Pro Mode 1-Off , Focus System Tilta Nucleus M(Dual Motor) • 1000 Wireless Range • Two Lens Drive Motors • Motors Feature Integrated Receivers • 0.8 Mod Drive Gears • Focus, Iris, Zoom Hand Unit • Motors Daisy-Chain For Power • Right Handgrip With Focus Control • Left Handgrip With Iris And Zoom Control • Hard-Shell Waterproof Case Included , Memory Card Lexar 512Gb Cf Express Type B Card Diamond Series Or Equivalent , Battery Newell V Mount Battery (290 Watts) , Charger Newell V Mount Dual Charger , Lens Kit 8,24,35,50,75, 100Mm Zeiss Nano Prime 6 Lens Kit(18,24,35,50,75,1 00Mm) Set • 18, 24, 35, 50, 75, And 100Mm Lenses • All Lenses Cover Full-Frame Format • T1.5 To T16 Aperture Range • 12-Blade Rounded Iris • Native Lens Data Communication • Zeiss Extended Data • Lens Scale Marked In Feet • Includes Transport Case , 10 &14Mm Laowa Lenses Pl Mount (12Mm Pl Mount Lens) • Full Frame & Vv | T2.6 To T22 Aperture • Zero-D Design, Low-Distortion Optics • 117.8° Fov, 15-Blade Aperture • 16 Elements In 10 Groups • 7.9 Minimum Focusing Distance • 77Mm Filter Thread, 80Mm Front Diameter , Zoom Lens 70-200Mm Zeiss 70-200Mm Cz.2 Lens , Tripod Occnnor 1040 • Tripod: Flowtech 100 Carbon Fiber • Payload Capacity: Up To 45 Lb (20.4 Kg) • Counterbalance: Sinusoidal, Continuously Adjustable • Pan/Tilt Drag: Independent, 9+0 Positions • Tilt Range: +90° To -90° • Tripod Max Height: 60 (152.4 Cm) • Leg Sections: 3, Quick-Release Locks • Floor Spreader: Included • Handle: Pan Handle Included, Attachable Both Sides • Weight: Approx. 12.5 Kg (27.5 Lb) , Camera Cage Tilta Camera Cage For Sony Burano Advanced Kit • Modular Cage For Sony Burano • 15Mm Lws Baseplate, Side Plates • Top Plate, Top Handle, Monitor Mount • Hdmi Cable Clamp, Wi-Fi Tx Bracket • Multiple 1/4-20 & 3/8-16 Threads • Qd Sockets, Shoe Mount, Nato Rails • Side Rosette, 15Mm Rod For Monitor Mount • Aluminum & Stainless Steel Construction , Evf Bracket Rotatable Evf Bracket For Sony Burano Or Equivalent , Tool Kit Tilta Multi Functional Mini Tool Kit • Multi-Functional Mini Tool Kit • Includes 2.5Mm, 3Mm, 4Mm, 3/16 Allen Keys • Flathead & Phillips #2 Screwdrivers, T10 Torx Driver • Aluminum Alloy Frame With Stainless Steel Tools • 3/8-16 And 1/4-20 Threaded Mounts • Compact And Lightweight Design • Integrated Strap Loop For Easy Carry • Color: Titanium Gray • Compatible With Tilta Camera Cages & Support Systems • Portable For Assembly, Disassembly, And On-Set Use , Matte Box Tilta 4X5.6 Carbon Fiber Matte Box Or Equivalent , Adaptor 1 Metabones Pl To E Mount Adaptor , Dry Cabinet Andbon 300 Ltr Dry Cabinet , Light Meter 1 (Common) Sekonic Spectro Master C- 800 Light Meter • Measurement Range: 0.09-18,600 Fc (1-200,000 Lux) • Color Temperature Range: 1600-40,000K • Sensor: High-Resolution Cmos Sensor With 1Nm Increment • Ssi Support: Spectral Similarity Index For Light Matching • Display: 4.3 Color Touchscreen With 11 Display Modes • Cri/Tlci/Tm-30-15: Full Color Rendering Metrics • Flash Measurement: Selectable Shutter Speeds From 1-1/500 Sec • Power: Usb Rechargeable • Connectivity: Usb 2.0 Interface • Dimensions: 73 X 183 X 27 Mm • Weight: 230 G • Included: Carrying Case And Usb Cable , Light Meter 2 (Common) Sekonic Speed Master L858D-U Light Meter • Measuring System: Incident And Reflected Light Metering • Sensor: Spd Sensor • Measuring Range: -5 To 22.9 Ev (Iso 100) • Illuminance Range: 0.1 To 2,000,000 Lux • Iso Range: Iso 3 To Iso 13,107,200 • Shutter Speed Range: 30 Min To 1/80,000 Sec • Display: 2.7 Color Touchscreen Lcd • Flash Measurement: Flash Duration (1/40 To 1/55,500 Sec) • High-Speed Sync (Hss): Supported • Flash Analyzing Function: Yes • Spot Metering: 1° Spot Meter With Viewfinder • Rotating Lumisphere: 270° Rotation, Retractable • Radio Control Modules: Optional For Pocketwizard, Elinchrom/Phottix • Weather Resistance: All-Weather Design • Power: Rechargeable Battery • Dimensions: Approximately 73 X 183 X 27 Mm • Weight: Approximately 230 G , Cine Video Monitor Tv Logic Monitor (Professional Grade) • 1920 X 1080 Resolution Ips Lcd Screen • Composite, 3G-Sdi A/B, Hdmi & Dvi Inputs • Hlg, Pq & Pq2 Hdr Emulation Support • 1 X Composite & 1 X 3G-Sdi Output • 500 Cd/M² Brightness, 178° Viewing Angle • 3.5Mm Audio Headphone Output • Gpi & Ethernet Control • Waveform, Vectorscope, Audio Meter • Focus Assist, H/V Delay, Key Lock, Zoom • Tvlogic Color Calibration Utility & More , Category E: Studio Kit (Common ) Computer Apple Mac Studio M3 Ultra 28 Core Cpu •Apple M3 Ultra 28-Core Cpu •96Gb Unified Ram | 2Tb Ssd •60-Core Gpu | 32-Core Neural Engine •Uhs-Ii Sdxc Card Reader •Wi-Fi 6E (802.11Ax) | Bluetooth 5.3 •6 X Thunderbolt 5 •2 X Usb-A 3.2 Gen 1 | 1 X Hdmi 2.1 •1 X 10 Gigabit Ethernet Port •Macos , Software Final Cut Pro , Software Adobe Psd Annual Subsrciption , Accessories Apple Monitor 27Inch 4K Retina Display , Accessories Apple Keyboard , Accessories Apple Magic Mouse , Accessories Required Cables , Light Controlling Tablet Apple Ipad Pro •13 Ultra Retina Xdr Oled Touchscreen •2752 X 2064 Screen Resolution (264 Ppi) •Apple M4 9-Core Cpu •10-Core Gpu | 16-Core Neural Engine •512Gb Storage | 8Gb Ram •5G Lte | Wi-Fi 6E | Bluetooth 5.3 •Front & Rear 12Mp Ultra Wide Cameras •40 Gb/S Thunderbolt Connectivity •Supports Apple Pencil Pro•Ipados , Display X Lg C3/G3 Oled 65 •Display Type: Qned (Quantum Dot Nanocell Withminiled) •Screen Size: 164 Cm (65 Inches)•Resolution: 3840 X 2160 Pixels (4K Ultra Hd) •Processor: Α7 Ai Processor 4K Gen8 •Color Technology: Dynamic Qned Color With 100%Dci-P3 Coverage •Local Dimming: Advanced Local Dimming Forenhanced Contrast •Hdr Support: Hdr10, Hlg, Dolby Vision •Audio Output: 20W Rms •Audio Technologies: Ai Sound Pro (9.1.2 Channel),Dolby Atmos •Operating System: Webos 2025 With Ai Features •Remote Control: Ai Magic Remote With Ms Copilotintegration •Connectivity: Wi-Fi, Bluetooth, Hdmi, Usb, Ethernet •Voice Assistant: Built-In Google Assistant, Alexasupport •Mounting: Vesa Compatible (300 X 300 Mm) •Dimensions (W X H X D): 1456 X 840 X 29.7 Mm •Weight: 22.5 Kg , Lg 9.1.5 Sound Bar S95Tr (Latest Model) Sound Bar: • Channels & Power: 9.1.5 Configuration With 810 W Total Output And 17 Built-In Speakers •Immersive Audio: Supports Dolby Atmos, Dts:X, Andtriple- Level Spatial Sound For A Cinematic Surroundexperience •Smart Integration: Ai Room Calibration Pro, Woworchestra & Wowcast Enable Seamless Integrationwith Lg Tvs And Wireless Pairing •Connectivity: Includes Hdmi Earc, Hdmi 2.1 Input,Optical, Bluetooth 5.1, Wi-Fi, Usb, Plus Support Forchromecast, Airplay 2, Alexa, And Google Assistant •Setup: Simple Installation Via Power And Single Hdmiconnection With Wireless Rears And Sub; Ideal Formedium-Sized Rooms •Design: Sleek And Low-Profile, Approximately 49.2 ×2.5 × 5.3 Inches (Soundbar); Space-Efficient Setup. , Projector 4K Projector With Screen •Display Technology: 0.65 Dlp •Resolution: 3840 X 2160 Pixels (4K Uhd) •Brightness: 2200 Ansi Lumens •Contrast Ratio: 600,000:1 •Color Gamut: 84% Dci-P3 •Throw Ratio: 0.69-0.83:1 •Zoom: 1.2X Manual Zoom•Focus: Manual •Input Lag: 4.16 Ms (1080P @240Hz) •Hdr Support: Hdr10, Hlg •Audio Output: 5W X 2 Speakers •Audio Features: Earc, Dolby Atmos Passthrough •Operating System: Android Tv (Via Qs02 Dongle) •Streaming Support: Netflix, Youtube, Prime Video,Disney+, Hbo Max, Apple Tv+, Spotify •Connectivity: 2X Hdmi 2.0B, Usb Type-A, Rs232,Audio Out (3.5Mm Mini Jack) •Wireless Features: Wi-Fi 6, Bluetooth 5.0, Googlecast, Apple Airplay •Dimensions: 11 Cm X 30 Cm X 25 Cm •Weight: 3.1 Kg •Power Consumption: 275W (Max), 0.5W (Standby) , Movable Storage 10Tb Desktop External Hdd - Usb 3.0 For Windows And Mac , Ups 1500Va Ups , Computer Speaker 2.1 2.1 Audio Computer Output , Mega Phone Ahuja Bta 550 Wireless Bluetooth Portable 30 Watt Pa • Power Output: 30W Rms • Speaker Configuration: Single 8 Full-Range Dual-Cone Speaker With Tweeter • Microphone Inputs: Two Wired Mic Inputs (4Mv/4.7Kω), One Wireless Mic Input • Auxiliary Input: One Guitar (Aux) Input (100Mv/47Kω) • Tone Controls: Active Bass And Treble Adjustments • Digital Effects: Built-In Digital Echo • Playback Features: Mp3 Player With Bluetooth, Usb, Sd/Mmc Card Support, And Recording Capability • Remote Control: Included For Convenient Operation • Power Sources: Ac Mains, External 12V Dc, Or Built-In 11.1V 2200Mah Rechargeable Li-Ion Battery • Battery Life: Approximately 4 Hours On Battery Power • Construction: Plastic Moulded Cabinet With Trolley System For Portability • With Microphone , Safety Storage Solid Safety Storage To Store Camera With Lock Camera Safety Storage With Door And Lock (14X3X9) (Lxbxh) , Category F: Lighting Equipments , Portable Light Kit • Eight Lights With Charging Case • Output: 396 Lux At 3.3 Per Light • 2000-10,000K Cct; Rgb Color Control • 4.2 X 2.7 Panel; 2-Hour Runtime Battery • Cri 96 | Tlci 96 | Cqs 95 | Tm-30 Rf 94 • Onboard, Dmx/Rdm, Crmx & App Control • Tighter 45° Beam Angle • 0-100% Dimming, 15 Special Effects • 1/4-20 & Magnetic Mounting, Ip65-Rated • Includes Mounting Accessories & Cables , Cine Led Bulb Kit Aputure B7C Bulb Kit (8 Bulbs) • For Studio And Film/Tv Production Output: 328 Lux At 3.3 (120º, 6500K) • 2000 To 10,000K; Rgb Color Control • 23.8 X 1.8 Panel; Ac/Dc Operation • Cri 96 | Tlci 98 | Ssi 74 | Tm-30 94 • Dmx, Crmx, And Sidus Link App Control • Passive Cooling • 2 X 1/4-20 Threads, Infinibar Rail • Clamp To Baby Pin Adapter • Straight Connector Included , Panel Light 1 Aputure Nova P600 C Panel Light • For Studio & Film/Tv Production Output: 17,520 Lux At 3.3 (5600K) • 2000 To 10,000K; Rgb Color Control • 31.6 X 18.96 Panel, Ac/Dc Operation • Cri 95 | Tlci 95 | Ss1 84 | Cqs 95 • On-Board, Dmx512, Bluetooth App Control • Active Fan Cooling • With Control Box, Yoke, Mounting Clamp • Dimming: 0-100°, Plus/Minus Green Adj. • 300+ Gel Presets, 19 Special Effect , Barn Door Aputure Barndoor For P 600 Light P600Rb4 Barn Door For Aputure P600C Or Equivalent , Soft Box Aputure Softbox P 600R23 • For Studio & Film/Tv Production • Output: 98,500 Lux At 3.3 W/ Reflector • 5600K Cct • Ac Or Battery Power • Onboard, Wireless, Dmx & App Control • Art-Net & Lumenradio • Cri 96 | Tlci 96 | Cqs 94 | Ssi 72 • Active Cooling, Weather-Resistant Design • Bowens S Accessory Mount • Includes Remote, Reflector & Rolling Bag , Cine Led Light Godox M 600R Light For Studio & Film/Tv Production Output: 136,000 Lux At 3.3 W/ Reflector 1800-10,000K Cct; Full Rgb Color Control Onboard, Dmx, Crmx & App Control Art-Net & Sacn Ethernet Control Fan Cooled Bowens Mount Ip65 Rated Includes Control Box Includes Power Cable & Soft Case , Cine Light 1 Godox Tl120-K4 Light Four Lights & Remote Control For Wireless Control From Up To 164 Output: 685 Lux At 3.3 For Each Light 2700-6500K Cct; Rgb Mode Onboard, Wireless, Dmx & App Control Cri 96 | Tlci 98 39 Preset Special Effects Built-In Rechargeable Battery; Ac Power Retaining Clip With 1/4-20 For Mounting Includes Adapters, Clips & Hard Case For Wireless Control From Up To 164 Output: 685 Lux At 3.3 For Each Light 2700-6500K Cct; Rgb Mode Onboard, Wireless, Dmx & App Control Cri 96 | Tlci 98 39 Preset Special Effects Built-In Rechargeable Battery; Ac Power Retaining Clip With 1/4-20 For Mounting Includes Adapters, Clips & Hard Case , Cine Light 2 Godox Tl 60-K2 Light Two Lights & Remote Control For Wireless Control From Up To 164 Output: 421 Lux At 3.3 For Each Light 2700-6500K Cct; Rgb Mode Onboard, Wireless, Dmx & App Control Cri 96 | Tlci 98 39 Preset Special Effects Built-In Rechargeable Battery; Ac Power Retaining Clip With 1/4-20 For Mounting Includes Adapters, Clips & Bag Remote Control & Carry Case , High Power Light 1 Godox Mg 120 Arc-Biannual Rate Contract Color Light For Photo, Video, Film & Tv Production 78,800 Lux At 9.8 With Optional Fresnel 2800-6500K Color Temperature Multi-Voltage Ac Power Onboard, Dmx & Lumenradio Crmx Control Bluetooth & 2.4 Ghz Wireless Control 96 Cri, 96 Tlci Fan Cooled, 0-100% Dimming 11 Special Effects, 4 Dimming Curves Compatible With Godox G-Mount Modifiers , High Power Light 2 Godox Mg1200 R Light Compatible With Godox G-Mount Modifiers Green/Magenta Adjustments, 14 Effects Upgraded Optical Technology, Ip65 Rated 78,800 Lux At 9.8 With Optional Fresnel 2800-6500K Color Temperature Multi-Voltage Ac Power Onboard, Dmx & Lumenradio Crmx Control Bluetooth & 2.4 Ghz Wireless Control 96 Cri, 96 Tlci Fan Cooled, 0-100% Dimming 11 Special Effects, 4 Dimming Curves Compatible With Godox G-Mount Modifiers , Storm Light 1 Godox Mg4 K Arc-Biannual Rate Contract Color Light For Studio & Film/Tv Production Output: 640,000 Lux At 3.3 W/ Reflector 2800-10,000K Cct; Green/Magenta Shift Ac Power Onboard, Dmx, Crmx, Ethernet & App Improved Fan Cooling System Compatible With Godox G-Mount Modifiers Upgraded Optical Technology & Ip65 Rated 2.4 Diameter Light Source Emitter Includes Controller & Ac Power Cable , Storm Light 2 Godox Mg 6K Arc-Biannual Rate Contract Color Light For Studio & Film/Tv Production Output: 1,025,000 Lux At 3.3 (5600K) 2800-10,000K Cct; Bi-Color Mode Powered Via Ac Cable & Power Controller Onboard, Dmx, Rdm & Bluetooth Control Cri 97 | Tlci 97 Advanced Air Cooling System G-Mount-Compatible & Includes Yoke Ip65-Rated For Dust & Water Protection , Light Mat 1 Aputure Infinimat 4 X 4 Light Mat • Type: Modular Rgbww Led Light Mat • Size: 4 X 4 Ft • Color Temperature: 2000-10,000K • Color Accuracy: Cri 96, Tlci 97 • Light Engine: Rgbww • Control Box: 1600W, Ac-Powered • Mounting: Multiple Methods Supported • Included Accessories: Inflatable Softbox, Skirt, Control Grid, Head Cable (24.6), Safety Rope • Power Consumption: 800W (Maximum) • Connectivity: Bluetooth (100M Range) , Light Mat 2 Aputure Infinimat 2 X 4 • Type: Modular Rgbww Led Light Mat • Size: 2 X 4 Ft • Color Temperature: 2000-10,000K • Color Accuracy: Cri 96, Tlci 97 • Light Engine: Rgbww • Control Box: 400W, Gold Mount • Power Options: Ac Or Gold Mount Battery • Mounting: Multiple Methods Supported • Included Accessories: Inflatable Softbox, Skirt, Control Grid, Head Cable (24.6), Safety Rope • Power Consumption: 400W (Maximum) • Connectivity: Bluetooth (100M Range) , Light Bar 1 Aputure Infinibar Pb 12 4 Light Kit • Output: 617 Lux At 3.3 (120º, 7500K) • 2000 To 10,000K; Rgb Color Control • 23.8 X 1.8 Panel; Ac/Dc Operation • Cri 96 | Tlci 98 | Ssi 74 | Tm-30 94 • Dmx, Crmx, And Sidus Link App Control • Passive Cooling • 2 X 1/4-20 Threads, Infinibar Rail • 8 X 45º Light Control Grids • Flight Case And 330W Power Adapter , Light Bar 2 Aputure Infinibar Pb6 4 Light • For Studio And Film/Tv Production Output: 328 Lux At 3.3 (120º, 6500K) • 2000 To 10,000K; Rgb Color Control • 23.8 X 1.8 Panel; Ac/Dc Operation • Cri 96 | Tlci 98 | Ssi 74 | Tm-30 94 • Dmx, Crmx, And Sidus Link App Control • Passive Cooling • 2 X 1/4-20 Threads, Infinibar Rail • Clamp To Baby Pin Adapter • Straight Connector Included , Compact Light 1 Amaran F22C Light • For Studio & Film/Tv Production Output: 6420 Lux At 3.3 (5600K) 2500-7500K Cct; Hsi Color Control • 2 X 2 Mat; Ac/Dc Operation • Cri 95 | Tlci 98 | Cqs 96 • On-Board, Dmx, And Bluetooth Control • Passive Cooling For Silent Operation • 0-100% Dimming, 15 Lighting Effects • Multi-Voltage Ac, V-Mount Battery • Includes Softbox Frame, Diffusers & Grid , Compact Light 2 Godox La 300 R Light For Video Production & Vlogging Output: 94,700 Lux At 3.3 W/ Reflector 1800-10,000K Cct; Full Rgb Color Control Ac Or Optional Battery Power Onboard & App Control; Nfc Connection Cri 95 | Tlci 94 14 Lighting Effects Bowens S Accessory Mount, Black Housing Includes Reflector Includes Power Adapter , Compact Light 3 Godox La 150 R Light For Video Production & Vlogging 165W Fixture 1800-10,000K Cct; Full Rgb Color Control Ac Or Optional Battery Power Onboard & App Control; Nfc Connection Cri 95 | Tlci 94 14 Lighting Effects Bowens S Accessory Mount Includes Reflector Includes Power Adapter , Panel Light 2 Godox Ldx 100 R Light For Video Production And Vlogging Output: 4620 Lux At 3.3 (5600K) 2500-10,000K Cct; Rgb Color Control 18 X 16; Ac/Dc Operation Cri 96 | Tlci 96 Onboard, Wireless & App Control 0-100% Dimming, 14 Lighting Effects Optional Remote Control & Barndoors Includes Diffuser Includes Power Supply & Carry Case , Panel Light 3 Godox Ldx 50 R Light For Video Production And Vlogging Output: 2340 Lux At 3.3 (5600K) 2500-10,000K Cct; Rgb Color Control 14 X 12; Ac/Dc Operation Cri 96 | Tlci 96 Onboard, Wireless & App Control 0-100% Dimming, 14 Lighting Effects Optional Remote Control & Barndoors Includes Diffuser Includes Power Supply & Carry Case , Cine Light Kit Aputure Storm 80C- 3 Light Kit Or Equivalent For Video Production And Vlogging Output: 2340 Lux At 3.3 (5600K) 2500-10,000K Cct; Rgb Color Control 14 X 12; Ac/Dc Operation Cri 96 | Tlci 96 Onboard, Wireless & App Control 0-100% Dimming, 14 Lighting Effects Optional Remote Control & Barndoors Includes Diffuser Includes Power Supply & Carry Case , Professiona L Light 1 Godox P 1200 R Hard P8 / Arri Sky Panel-X 21 Or Equivalent • Type: Modular Rgbacl Led Panel • Color Temperature Range: 1,500-20,000K • Color Accuracy: Cri ≥99, Tlci ≥93 • Light Output: 16,602 Lux At 3.3 (1M) • Panel Size: 2X1 (29.1 X 13.3 Inches) • Pixel Zones: 8 Independent Zones • Control Options: Wired (Dmx-512), Wireless (Bluetooth Via Lico App, Lumenradio) • Cooling: Passive/Active With Ip66 Rating • Power Supply: Integrated Psu; Daisy-Chainable With Other Skypanel X Units • Mounting: Tool-Less Frame With Quick-Lock System • Compatibility: All S60-C Accessories Via Optional Adapter • Included Accessories: X21 Dome, Manual Yoke, Mains Cable , Hard Light Godox P 1200 R Hard / X21 Hard Light For Arri Sky Panel Or Equivalent P8 X21 Hard Light For Arri Sky Panel Or Equivalent , High Power Light Godox P 1200 R Hard P 8 For Studio & Film/Tv Production Output: 129,200 Lux At 3.3 (5600K) 1800-10,000K Cct; Rgb Color Control 29.2 X 15.2 Panel | Ac Power Cri 96 | Tlci 98 Onboard, Dmx/Rdm, Crmx & App Control Improved Fan Cooling System Flicker-Free Operation Ip65-Rated Weather Resistance Includes Yoke & Ac Power Cable , Dido Lights Godox Ms 600R 2K / Dido Lights Light , Category G: Light Accessories Spotlight Mount 1 Godox Vsa-26 K Spotlight Attachment Projectionlight Kit , Spotlight Mount 2 Godox Vsa-36K Kit Spotlight Attachment Kit , Iris 18 X Godox Vsa-Id Spotlight Mount 36 , Gobo Kit Godox Vsa-Gs1 Gobo Kit , Fresnel 1 Godox Fls 5 Fresnel , Fresnel 2 Godox Fls 10 Fresnel , Barn Door Godox Lb-02 , Light Dome 1 Godox Qr-P 90 T Light Dome , Light Dome 2 Godox S 65 T Light Dome Mini , Light Dome 3 Godox Qr-P 150 T Light Dome , Light Dome Godox Cs 85D Lantern 120 , Light Dome Godox Gp 5 Light Dome , Lantern Godox Cs 85 D Lantern , Reflector Kit Reflector Kit (For 1200X & 1000C) Or Equivalent , Cf12 Fresnel Godox Fls 10 Fresnel , Spotlight Max 1 Godox Gp 36 K Spotlight , Spotlight Max 2 Spotlight Max 50 (For 1200X,1000C,Xt 26) Or Equivalent , Iris Max 18 Godox Gp-Id Iris , Gobo Kit Godox Gobo Kit Godox Gp-Gs1,2,3,4,5 , F14 Fresnel Godox Gf 14 Fresnel , Beam Kit Storm Parallel Beam 70 Kit With Flight Case Or Equivalent , Cf16 Fresnel Cf16 Fresnel With Flight Case Or Equivalent , Stand 1 Dearkol Mfe 5800 (Expandable Up To 17Ft Height & 62Kg Payload) Or Equivalent , Stand 2 Dearkol Mfd 6000 (Expandable Up To 20Ft And 82Kg Payload) Or Equivalent , Soft Box Godox P 1200 Rh Do Softbox , Mounting Rig Godox P 1200 Rh Ad Mounting Rig , Lights Dimmer 5K Dimmer , Skimmer Cloth 10X10 Skimmer Cloth , 12 X12 Skimmer Cloth , 10X10 Black Cloth , 12 X12 Black Cloth , 10X10 Green Cloth , 12 X12 Green Cloth , Backgroung For Photography , Safety Storage For Lights Camera Safety Storage With Door And Lock (14X3X9) (Lxbxh) Stainless Steel 0.8Mm, Thickness (Jindal Ss) , Category H: Light Grip Equipments C Stand Godox 270Cs Stand , Par Stand 1 Par Stand Double Height , Par Stand 2 Par Stand Triple Height Or Equivalent , Black Flags 1 4X4 Black Flags Or Equivalent , Black Flags 2 2X1 Black Flags Or Equivalent , Empty Frames 4X4 Empty Frames Or Equivalent , Boom Rods Boom Rods (Various Sizes) Or Equivalent Boom Rods : Stand Height 6Ft To 10Ft, Extension Rod 5 Ft To 10Ft. , Arm Rods Arm Rods (Various Sizes) Or Equivalent , L Rods L Rods (Various Sizes) Or Equivalent , Sand Bag Sand Bag (Professional Grade) Or Equivalent , Skimmer Frame 1 6X6 Skimmer Frames Or Equivalent , Skimmer Frame 2 10X10 Skimmer Frames Or Equivalent , Skimmer Frame 3 12X12 Skimmer Frames Or Equivalent , Grid 1 Honey Comb Grid 6X6 Or Equivalent , Grid 1 Honey Comb Grid 10X10 Or Equivalent , Grid 1 Honey Comb Grid 12X12 Or Equivalent , Loop Boards Loop Boards (Various Sizes) Or Equivalent Solid Wooden Loop Boards (Various Sizes) 20Mtrs 6Pin Socket 2Nos With Led Indicator And A Tripper-15 Nos; 10Mtrs Board With 6Pin Socket 4 Nos With Switch, Led Indicator And A Tripper- 10 Nos; And 20Mtrs Board 6Pin Socket 6Nos With Switch, Led Indicator And A Tripper-5 Nos. , Track System Track & Trolley Full Kit 40Feet Length Manuall 150 Bowl Height 100Kg Capacity With Head , Slider Slider 10Ft Full Kit Or Equivalent , Low Base Stands Low Base Stands , Stand For 100 Bowl Head , Stand For 150 Bowl Head , Cutter Stand , Grip Heads Grip Heads (Professional Grade) , Reflector Board Reflectors 4X4 Board , Low Board , Apple Box Apple Box Setup (Complete Set) Apple Box Setup 20X12X8, 20X12X4, 20X12X2 ,20X12X1 (Complete Set) , Stool Setup Stool Setup 1 Feet , Stool Setup Stool Setup 2 Feet , King Pole- Wall To Wall Mount King Pole (6Ft To 12Ft) , Light Clamps Light Clamps (Various Sizes) , Hydraulic Stand Hydraulic/Windup Stand , Category I: Television Production , Video Camera Sony Hx Z 200 Camera , Mixer Yamaha Mg10X Mixing Console Audio Mixer - Xlr Input/Output, Phono Jack, Level Meter , Recorder Zoom H8 Recorder , Tripod Small Rig Ad80 Carbon Tripod Model No:4163 , Mic And Accessories Sennheiser Lapal Microphone With Cable , Mic And Accessories Rode Boom Pole , Mic And Accessories Rode Ntg4 Mic , Mic And Accessories Rode Blimp , Cables Monitoring Head Phone, Video/Audio Cables And Connectors , Mac Imac, Apple M4 Chip 10-Core Cpu With 4 Performance Cores And 6 Efficiency Cores 10-Core Gpu Hardware-Accelerated Ray Tracing 16- Core Neural Engine 120Gb/S Memory Bandwidth, 512Gb Ssd, 24Gb Unified Memory, 60.96 Cm (24″) 4.5K Retina Display 4480X2520 Resolution At 218 Pixels Per Inch With Support For 1 Billion Colours, Keyboard & Mouse , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Manpower Deployment , Cost For Deployment Of System Administrator For One (1) Year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Tamil Nadu View Result →
36.
Educational and Research Institute #10734365 AOC
Notice Inviting Etender For Procurement Of Equipment, Instruments, Machineries, Tools Charts Etc. Related To Laboratories And Workshop Of Engineering Institute For Junior Executives, Dalalpukur, Howrah-711104-1 Dead Weight Pressure Gauge Tester • Bourdon Tube Pressure Gauge As Manometer • Manometer With Transparent Scale • Manufactured From Corrosion Resistant Materials • Components Arranged On Base Plate. • Set Of Weights • Medium For Transmitting Pressure: Hydraulic • Capacity Of 25Kg / Cm2 • The System Is Nickel Chrome • The Weights Are Zink Iron ) 2 Cut Section Model Of Hermetically Sealed Compressor 3 Universal Bevel Protractor ( Accuracy: 0.01 Mm Material: Stainless Steel Diameter: 70 Mm Size: 300 Mm Type: Analog Graduation 5 Min Straightness .00016+ ( .00005Xl / 2 ) ) 4 Cut Section Model Of Lamont Boiler 5 Slip Gauge Set; Special Set ( M87 ) , Grade I, High Grade Steel, 9 Mm Wide & 30-35 Mm Long Cross Section. 6 Utm Machine ( Material:Ms Voltage:220 V Phase: Single Phase Capacity: 10 To 100 Ton Cross Travel: Up To 1000 Mm Weight: 1500 Kg ) 7 Mollier Chart Flex ( 40 × 30 ) 8 Teak Wood; Wood For Pattern Shop Size: 2×1×6 9 Thermal Conductivity Of Metal Rod; • Frame: Made Of M.S. Square Tubes & Sheets, Welded & Powder Coated • Optional Accessories: Rotameter For Water Flow Measurement • Electric Heater : Clamp Heater, Capacity 200 W, Supply 230 V Ac • Insulation Jacket: Made Of Mild Steel, Mild Steel Rod Is Insulated By Asbestos Powder • Diameter Of Metal Rod 25 Mm, Length Of Rod 300 Mm 10 Cut Section Model Of Screw Type Rotary Air Compressor 11.01 Chart Of Velox Boiler With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.02 Chart Of Mollier Diagram With Labelling ( Size: 23’’ X 36’’, Material: Pvc, With Roller ) 11.03 Chart Of T-T-T Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.04 Chart Of Utm Machine & Sample With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.05 Chart Of Torsion Testing Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.06 Chart Of Iron-Carbon Equilibrium Diagram With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.07 Chart Of Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.08 Chart Of Vernier Height Gauge With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.09 Chart Of Thread Measurement With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.10 Chart Of Gear Tooth Vernier Caliper With Labeling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.11 Chart Of Hermetically Sealed Compressor With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.12 Chart Of Domestic Refrigerator With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.13 Chart Of Full Pressure Engine Lubricating System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.14 Chart Of Constant Mesh Gear Box With Labeling ( Size:30× 40, Material: Pvc, With Roller ) 11.15 Chart Of Synchromesh Gear Box With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.16 Chart Of Components Of A Chasis With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.17 Chart Of Knuckel Joint With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.18 Chart Of Intersection Of A Prism And Cone ( Size:30× 40, Material: Pvc, With Roller ) 11.19 Chart Of Projection Of A Straight Line In Different Quadrants ( Size:30× 40, Material: Pvc, With Roller ) 11.20 Chart Of Plummer Block - Details And Arrangement ( Size:30× 40, Material: Pvc, With Roller ) 11.21 Chart Of Centrifugal Pump With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.22 Chart Of Balanced Type Vane Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.23 Chart Of Bent Axis Piston Pump With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.24 Chart Of Lathe Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.25 Chart Of Single Point Cutting Tool Geometry With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.26 Chart Of Screw Jack Assembly With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.27 Chart Of Cotter Joint Assembly And Design With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.28 Chart Of Vertical Drilling Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.29 Chart Of Shaper Machine With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.30 Chart Of Safety On A Lathe Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.31 Chart Of Safety On A Milling Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.32 Chart Of Safety On A Shaper Machine ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.33 Chart Of Safety In Carpentry Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.34 Chart Of Safety In Fitting Shop ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.35 Chart Of General Precaution In Workshop ( Size:30× 40, Material: Pvc, With Roller ) 11.36 Chart Of Cnc Turning With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.37 Chart Of Elements Of Jigs ( Drill Bushes ) With Labelling ( Size:23’’ X 36’’, Material: Pvc, With Roller ) 11.38 Chart Of Tig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.39 Chart Of Mig Welding With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 11.40 Chart Of Engine Cooling System With Labelling ( Size:30× 40, Material: Pvc, With Roller ) 12 Digital Lab Trainer ( Bread Board Model ) ( Built-In Dc Regulated Power Supply; At Least 8 Logic Input Switches; At Least8 Output Led; Pulse Generator For Clock Frequency ; Patch Chords ) 13 Arduino Uno Board ( Atmega328 ) 14 Experimental Kit To Study Pam, Pwm And Ppm Modulation And Demodulation ( Pulse Generator With Variable Frequency And Amplitude, Pam Modulator And Demodulator, Pwm Modulator And Demodulator, Ppm Modulator And Demodulator ) 15 Ujt Trainer Kit With P.S. & Patch Cord 16 Led Colour Tv Demonstration Kit ( Display Type: Led, Hd: Screen Size: 24: Connectivity: Usb, Hdmi, Av: Test Points To Be Present Minimum 10 Nos.: Switched Faults To Be Provided: Product Tutorial Should Be Present ) 17 Microwave Oven Demonstration Trainer Kit ( Type: Solo: Capacity: 17 Ltr.: Control Type:Mechanical: All Circuits & Panels To Be Mounted On-Board: Test Points To Be Provided To Analyze Signals: Instruction Manual To Be Provided ) 18 Washing Machine Demonstration Trainer Kit ( Application: Lab Experiment: Semi-Automatic: Tank Capacity: 6.5 Kg: Block Diagram & Circuit Diagram To Be Mounted On The Lid: Test Points To Be Provided ) 19 Mobile Communication Trainer Kit To Study Various Signalling And Fault Insertion Techniques ( Gsm Handset Trainer Kit.  Operate Both On Windows And Linux Platform  Usb Interface For Communication  Best Suitable For Iot Gateway Application  External Connector To Interface With Any Microcontroller  Easy Understanding Of At Commands  Real Time Operation  Built In Network Status Led  Audio Interface Connector  Simple / Easy Operation  External Antenna  Application Module Relay Interface For Ac Device ( Optional ) ) 20 Trainer Kit For Mobilephone Set To Study Transmitter And Receiver Sections In Mobile Handset And Measure Frequency Band Signal ( Real Time Mobile Operation # Full Understanding Of Mobile Phone Working # Frequency Measurement And Band Verification # Provides Study Of All Sections In Mobile Phone # Tx / Rx Frequency Measurement # 3G / 4G Technology And Gmsk Signals # Gsm Data Rate # Detail Study Of User Interface Control Signals # Detail Study Of Sim Operation # Battery Identification And Charging Study  Switched Faults 21 Consumable ( 9V Battery, Cro Probe, Digital Ics ) 22 Cro ( 20 Mhz , Dual Trace, Dual Channel ) 23 Trainer Kit For Mobile Phone ( Features : The Experimental Kit Will Be Capable I ) To Study General Block Diagram Of A Mobile Phone. Ii ) To Study Mobile Transmission Section. Iii ) To Study Mobile Reception Section. Iv ) To Study Different Nos. Of Faults Provided With The Trainer. V ) To Study & Observe Voltages / Waveforms Of Each Test Points. Vi ) To Study Mobile Charging Circuits. Vii ) To Use Mobile Phone As Modem For Using At Commands As Given; A ) Sending Text Messages, Read / Delete Massages Etc. B ) Calling To A No, Reject / Accept The Incoming Calls Etc. C ) Gprs Related Commands. Study Of Bluetooth Technology & Connection With Other Bt Devices. Bluetooth Profiles : Bip, Bpp, Dunp, Ftp, Hid, Opp , Sap, A2dp, Pbap, Spp Etc. To Study General Idea Of Sim Card. ( Local Sim Card Must Be Inserted By The User At The Time Of Experiment ) . ) 24 Salt Bath Furnace For Heat Treatment ( • Resistance Heating ( Element ) • Operating Temp.: Up To 1200°C • Digital Temp. Controller ( Pid ) • Chamber Size : 450Mm X 300 Mm X 300 Mm • Furnace Uniformity + / - 2°C • Temp Recorder With 2 Channel Placed At Opposite Sides • Salt For Use With Two Times Top Up • Spare Heating Element 2Pc ) 25 In-Situ Metallography Kit ( • Items: Portable Grinder / Polisher, Grinding Discs, Lapping Cloths, Diamond Pastes, Aerosol Spray, Replication Film, Paste, Reflector And Gumming Tape For Excellent Contrast Or Transparent Replica - Film Thickness - 125 Microns, 30 Microns, Replica Liquid, Glass Slides ) 26 Automatic Electrolytic Polishing Machine ( • Function: Fully Automatic Electrolytic Polishing And Etching With Automatic Scanning Function • Preparation Time: Within 30 Sec • Electrolyte For Low / High Alloyed Steels & Aluminium • Pump And Magnetic Stirrer • Integrated Cooling System ) 27 Micro-Hardness Tester ( • Test Load : 10, 25, 50, 100, 200, 300, 500, 1000 Gm • Scale: Knoop & Vickers • Dwell Time: 5-90 Seconds Settable • Objectives : 10X, 20X, 40X, 60X • Loading And Unloading : Motorized • Measurement – Automatic And Or With Manual Micrometer Eyepiece. • Traverse: Automatic And Or Manual With Micrometer. • Focusing - Motorized Focusing With Manual Over-Ride • Computerized Imaging Attachment, Dedicated Software To Measure Hardness On Computer With Report Generation Facility • Accessories: Sheet Holder, Wire Holder, Hardness Test Block, Bulb, Indenter. ) 28 Cracked Aluminum Test Block ( For Penetrant Sensitivity Checking In Dpt ) ( Aluminum Test Piece That Measures 3 X 2 X 3 / 8 With A 1 / 8 Wide With A Milled Notch That Separates The Blocks Two Sides To Facilitate Side-By-Side Penetrant Comparison. The Test Block Is Used To Check The Strength Of “In-Use” Penetrants. This Is Done By Processing One Half Of The Block With “Used” Penetrant, And The Other Half With Fresh Penetrant. Can Be Used To Compare Sensitivity Of Different Penetrants Or Sensitivity Of New And Old Penetrants. Complies With Astm E165 And Asme Boiler And Pressure Vessel Code Section V & Iii, And Mil-I-23135-C. ) 29 Pie Gauge / Magnetic Flux Indicator ( To Be Made From Eight Ferrous Segments, Braised Into A Single Piece, Providing A Star Pattern Of Nonferrous Discontinuities. Eight Linear Discontinuities To Provide Indications In All Directions Non-Ferrous Handle With Pivot. Specification Compliance • Mil-Std-271 • Astm E709 ) 30 20Mhz Analog Cro ( Dual Trace ) , Bandwidth:- Dc ~ 20Mhz ( -3Db ) Y Deflection:- 5Mv / Div ~ 10V / Div. Rise Time:- <18Ns，Mag _70Ns ：17.5Ns. Max Input:- 400V ( Dc+Acp-P ) 31 50Mhz Digital Storage Oscilloscope, Bandwidth 50Mhzreal-Time Sampling Rate 500 Msa / S, Equivalent Sampling Rate 50Gsa / S.Memory Depth: 32Kptstrigger Types: Edge, Pulse Width, Video, Slope, Alternativeunique Digital Filter Function And Waveform Recorder Function, Max Input:- 400V ( Dc+Acp-P ) 32 3D Model Showing Different Parts Of A Coal Fired Thermal Power Station 33 3D Model Showing Different Parts Of A Gas Fired Thermal Power Station 34 3D Model Showing Different Parts Of A Diesel Power Station 35 3D Model Showing Different Parts Of A Nuclear Power Station 36 3D Model Showing Different Parts Of A Hydro-Electric Power Station 37 3D Model Of Boiler Showing Its Different Parts Used In Coal Fired Thermal Power Station 38 3D Model Of Boiler Showing Its Different Parts Used In Nuclear Power Station 39 3D Model Of Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant 40.1 Colour Flex Chart Describing Different Parts Of A Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.2 Colour Flex Chart Describing Different Parts Of A Gas Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.3 Colour Flex Chart Describing Different Parts Of A Diesel Power Station Size:30× 40, Material: Pvc, With Roller 40.4 Colour Flex Chart Describing Different Parts Of A Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.5 Colour Flex Chart Describing Different Parts Of A Hydro-Electric Power Station Size:30× 40, Material: Pvc, With Roller 40.6 Colour Flex Chart Describing Different Parts Of Boiler, Used In Coal Fired Thermal Power Station Size:30× 40, Material: Pvc, With Roller 40.7 Colour Flex Chart Describing Different Parts Of Boiler, Used In Nuclear Power Station Size:30× 40, Material: Pvc, With Roller 40.8 Colour Flex Chart Describing Water Turbine Showing Its Different Parts, Used For Hydro-Electric Power Plant Size:30× 40, Material: Pvc, With Roller 41 3-Phase Induction Motor Speed Control Using Pwm Inverter For Interpreting Speed-Torque Characteristics Using Vvvf Drive 42 Ups Trainer Kit ( 1Kva ) Output Voltage : 230 V Ac Nominal, Input Voltage : +12V Dc Battery. Capacity : 1Kva, Output Frequency : 50 Hz Accuracy : + 5%. Switching : Automatic. 43 Smps Trainer Kit Incl. ±5V, ±12V Input Voltage: Ac 100 – 264V 50 / 60Hz Output Voltage: 12V Dc, 0-5A Output Voltage: Adjustment Range: ±20% Protections: Overload / Over Voltage / Short Circuit Auto-Recovery After Protection Universal Ac Input / Full Range 100% Full Load Burn-In Test Cooling By Free Air Convection High Quality And High Performance Led Power Supply With A Metal Body For Hidden Installation For Led Lighting Design With Built-In Emi Filter, Improve Signal Precision. Certifications: Ce & Rohs No Minimum Load. Compact Size Light Weight. High Efficiency, Reliabiltiy & Low Energy Consumption Controller: Satandard 44 Commutation Kit Of Scr ( Class A To F ) Completely Self – Contained Stand – Alone Unit. Demonstrates The Principle And Various Methods Of Forced Commutation Of Scr. 1. Self-Commutation By Resonating Load ( Class “A” Method ) . 2. Self-Commutation By An L C Circuit ( Class “B” Method ) . 3. Complimentary Commutation ( Class “C” Method ) . 4. Auxiliary Commutation ( Class “D” Method ) . 5. External Pulse Commutation ( Class “E” Method ) . * Supply Required 230V, 50Hz Ac. * Built-In Ic Based Dc Regulated Supply And Led Indication For Supply “On”. * Built-In Load Facility In The Form Of Led’S. * Connecting Each Circuit Separately And Verifying Its Principle. * Multicoloured Test Points Are Provided To Observe The Waveform And Voltages. * Set Of Required Number Of Patch Cords. * Housed In An Elegant Cabinet With A Well Spread Intelligently Designed Circuit Layout Engraved On The Front Panel. * Strongly Supported By A Comprehensive Instruction Manual Complete With Theory And Operating Details. 45 Colour Flex Chart Describing Single Line Diagram Of A Given Distribution System ( Lt & Ht ) Size:30× 40, Material: Pvc, With Roller 46 Colour Flex Chart Describing Short Transmission Line ( 220Kv ) Size:30× 40, Material: Pvc, With Roller 47 Colour Flex Chart Describing Medium Transmission Line ( 220Kv ) ( Both T & Π-Model ) Size:30× 40, Material: Pvc, With Roller 48 Power Factor Improvement Kit Using Static Condenser Including Load R-L Load Of At Least 2Kva With Appropriate Capacitor Bank. 49 Setup For Load Test On 1-Ph Induction Motor: Load Test Kit Of 1-Ph Induction Motor ( 1Hp, 230V, 50Hz ) 50 Loading Test Kit Of 3-Phase Alternator: ( 2Kw, 415V, 50Hz ) With 3-Ph R-L Load Box Coupled To A Dc Motor; Capable To Perform As Synchronous Motor Test With Dc Generator Load; Integrated With All Required Measuring Instruments 51 Speed Control Kit Of Stepper Motor Including Reversing Arrangement With 8051 Microcontroller: Stepper Motor Of Appropriate Capacity To Be Served By 8051Μc 52 Speed Control Kit Of Ac Servo Motor: Motor Spec: 3000Rpm, 200W, 0-240V, Control Torque: Standard With All Needed Accessories 53 Speed Control Kit Of Dc Servo Motor: •Voltmeter Vdc 3.5 Digit. 200Mv •Rpm Indicator For Speed Measurement •Voltmeter Vdc 3.5 Digit 20V Power Supply: •Ic Regulation In Controller Circuit Power Supplies •Operated On Mains Power 230V, 50Hz +10% Features: •Position Control Of A 12 Volt, 1 Amp Dc Geared Pm Motor ( 50 / 60 Rpm ) •Calibrated Dials With 1 Degree Resolution For Reference And Output Position •Two 360 Degree Servo-Potentiometers •Built In Step Signal •Built In Waveform Capture / Display Card For Study Dynamic •Electronic Techogenerator For Feedback •Non-Contact Eddy Current Break For Load •Speed Control Of 12V, 4W, Permanent Magnet Dc Motor •Speed Range Up To 3000 Rpm ( Typical 54 Mcb Test Kit For Performing Load Test: Kit Should Be Able To Perform Short-Circuit, Over Load, Thermal Trip Test For Mcb With Rating Upto 30A 55 Dismantled Elcb & Rccb Kit For Demonstration Purpose: Elcb: Single Phase 2 Pole Elcb, Rccb, Isi Marked 32A Mcb With High Voltage, Overload Protection, Current 3 To 30 Ma Rccb: Breaking Capacity 10 Ka, Frequency, 50 Hz, Number Of Poles 2P, Operating Characteristics: Ac Rated Current 40 A, Sensitivity 30 Ma, Standard, Is 12640-1 & Iec 61008-4, Test Button Yes 56 Testing Kit For Percentage Differential Protection Of Transformer Using Transformer Differential Relay ( Electromagnetic / Μp Based / Static ) : Standard For Laboratory Purpose 57 Colour Flex Chart Describing Different Parts Of Acb & Vcb ( 33Kv, 15Mva ) : Size:30× 40, Material: Pvc, With Roller 58 Experiment Kit To Measure Solar Radiation Using Pyranometer On Tilted Surface At Different Angle Inclination: Standard For Laboratory Purpose 59 Colour Flex Chart Describing Different Parts Of Solar Flat Plate Collector & Solar Concentrating Collector & Trough Collector: Size:30× 40, Material: Pvc, With Roller 60 Experiment Kit To Measure Thermal Performance Of Solar Water Heating System: Standard For Laboratory Purpose 61 3D Model Describing Different Parts Of ( I ) Solar Street Lighting System & ( Ii ) 1Kw Small Wind Turbine ( Swt ) : 3D Model For Laboratory Purpose 62 Setup Of 250Wp Solar Pv Plant Including All Accessories: Solar Panel Specifications:Peak Power: 250W; Maximum Power Voltage: 20.2V; Maximum Power Current: 12.38A; Open Circuit Voltage: 23.9V; Short Circuit Current: 13.12A; Power Allowance Range: + / - 3% Hybrid Inverter Specifications: Nominal Battery Voltage: 12V; Continuous Power Output: 1000W / 1000Va; Surge Power: 2000Va Output Voltage: 230V Ac; Output Frequency: 50Hz / 60 Hz; Output Waveform: Pure Sine Wave; Maximum Solar Input Power: 600W; Maximum Open Circuit Solar Input Voltage: 55V; Maximum Solar Charging Current: 50A; Maximum Mains Ac Charging Current: 20A; Maximum Combined Charging Current: 50A; Peak Efficiency: 93% Battery Specifications ( Per Battery ) : Nominal Voltage: 12V; Nominal Capacity: 50Ah ( 10H Rate ) / 55Ah ( 20H Rate ) ; Maximum Charging Current: 25A; Self-Discharging Rate: <3% Per Month; Cycle Lifetime At 30% D.O.D.: 1000-1100 Pressure Control: Safety Valve Installed Terminal Type: F13 ( Bolts And Washers Included ) Operating Temperature: From +10C To +40C 63 Setup Of Small Wind Turbine Plant Including All Accessories: Standard For Laboratory Purpose 64 Study Kit Of Assembling And Dismantling Of Csp Plant Using Parabolic Trough Or Disc: Standard For Laboratory Purpose 65 Study Kit For Assembling Vertical Axis Or Horizontal Axis Swt: Standard For Laboratory Purpose 66 Digital Lcr Multimeter: Digital Lcr Meter ( Battery Operated ) , Model: 4070 Range: 0.1Μh To 20H, 0.1Pf To 2000Μf, 0.1Ohm To 20Mohm Accuracy: 2Mh, Resolution: 1Uh, Accuracy: 20Mh, Resolution: 10Uh, Accuracy: 200Mh, Resolution: 100Uh Accuracy: 2Nf, Resolution: 1Pf, Accuracy: 20Nf, Resolution: 10Pf, Accuracy: 200Nf, Resolution: 100Pf, Accuracy: 2Uf, Resolution: 1Nf, Accuracy: 200, Resolution: ± ( 0.8 Percent+5 ) 0.1, Accuracy: 2K, Resolution: 1, Accuracy: 20K, Resolution: 10, Accuracy: 200K ( Make: Metravi ) 67 Handheld Power Meter Or Power Analyzer With Socket: Voltage: 85V-265V, Current; 0.002A~20A, 50Hz, 1-Ph 68 Analog Power Factor Meter ( 1-Ph & 3-Ph ) : Standard For Laboratory Purpose 69 Multimeter With Clamp Meter Arrangement With Hfe Lcr: Standard For Laboratory Purpose ( Make: Metravi ) 70 Three Phase Power Measurement Kit ( Y & Δ Load R-L Load ) Incl. 3-Ph Wattmeter With 2Kw Range: Standard For Laboratory Purpose 71 Kit For Troubleshooting Single Phase Electronic Energy Meter: 230V, 1-Ph, 50Hz 72 Three Phase Trivector Meter: Salient Features Class 0.5S As Per Relevant Is And Iec Standards 5A Current Rating 3 Phase 4 Wire 4 Quadrant Measurement Anti-Tamper Features Self-Diagnostic Capability Multiple Tariff / Time Of Day Feature Bidirectional Energy Recording Up To 4 Maximum Demand Registers Load Survey ( Interval Data ) Features Up To 12 Reset Backups Optical Port / Rs 232 / Rs 485 / Ir / Irda / Rf ( 2.4 Ghz / 865-867 Mhz ) ( Optional ) ( Make: L&T ) 73 Brake Test Kit Of Dc Series Motor: 220V Dc, 2Hp With Allied Required Accessories 74 Back-To-Back Test Kit Of Single Phase Transformer: 1-Ph, 240V, 50Hz, 1Kva ( 2 Nos. ) Identical Transformers With Other Standard Accessories 75 Isolation Transformer Kit: 230V; 230V / 10Amp 230V; 230V / 5Amp 76 Pulse Transformer Kit: Dc Supply: Two 5V & 12V, Pulse Generator: Two Selectable Frequency & Variable Pulse Width, Mains: 230V / 50Hz, Adequate For Cro Observations, Optocoupler: One, One Ferrite Wired 1:1 77 Colour Flex Chart Describing Different Vector Groups Of Theree Phase Transformer: Size:30× 40, Material: Pvc, With Roller 78 Full-Wave Fully Controlled Bridge Rectifier Kit With & Witout Filter Arrangement: Standard For Laboratory Purpose 79 Kit To Find The Characteristics Of Zener Diode: Standard For Laboratory Purpose 80 Kit To Find The Characteristics Of Mosfet: Standard For Laboratory Purpose 81 Ujt Relaxation Oscillator Trainer Kit: Standard For Laboratory Purpose 82 Singlestatge Transistor Trainer Kit ( Ce-Mode ) : Standard For Laboratory Purpose 83 Trainer Kit For Sr, D, Jk & T – Flip-Flop: Standard For Laboratory Purpose 84 Trainer Kit For Realization Of Encoder And Decoder Circuit: Standard For Laboratory Purpose 85 Trainer Kit For Realization Of Multiplexer And Demultiplexer Circuit: Standard For Laboratory Purpose 86 Trainer Kit For Implementing Dac & Adc: Standard For Laboratory Purpose 87 Connector Cables For Ade Lab. Of Different Types: Standard For Laboratory Purpose 88 Arduino Uno R3 Board With Lcd1602, Servo Motor, Relayes, Processing And C Code, Beginner Starter Kit With Mannual And Allied Accessories: Standard For Laboratory Purpose 89 Trainer Kit For 8051 Μc Programming: Trainer Kit For 8051 Μc Programming With Keypad To Write Program 90 Trainer Kit Using 8051 Μc For Measurement Of Ac Voltage, Current, Frequency & Phase Angle Using Suitable Ct, Pt, Zcd, Adc, Etc. 91 Demonstration Kit For Identifying Pvc, Xlpe, Vir, Catenary, Frls, Frlsh Cables / Wires Of Different Current Rattings: Standard For Laboratory Purpose 92 Megger: Insulation Tester ( 500V ) With Hand-Driven Gen.: 500V, 2500 Mega Ohms 93 Megger: Insulation Tester ( 2500V ) With Hand-Driven Gen. 2.5Kv, 2500 Mega Ohms 94 3-Ph Smart Energy Meter For Lt Power Measurement, 3-Ph, 415V, 4-Wire, Kwh Meter, Current: 10-60A, Class 1.0 Accuracy As Per Relevant Is And Iec Standards, With Lcd Display [ Make: L&T ] 95 Trainer Kit For Dc Chopper Drive With Resistive Load & Dc Separately Excited Motor. 1 / 8 Hp, 200Vdc Operation, Current Limit Protection, Speed Control Using Frequency And Duty Cycle Variation, Jones Chopper Based Control, Motor Loading Arrangement Can Be Provided / Resistive Load May Be Connected, Other Variety Of Controllers With Converter Control With Closed Loop Controller 96 Trainer Kit For Controlling The Speed Of Separately Excited Dc Motor By Changing The Firing Angle Of Scr Using 1-Ph Full Converter. Power Supplies: • Power Supply +15Vat 150Ma • Isolated Supply 0-220V At 5A. • Operated On Mains Power 230V, 50Hz +10% Digital Meters: • Voltmeter 2000V Ac • Voltmeter 2000V Dc • Ammeter 2A Dc Components Are Mounted On The Panels Are: • Scr Tyn604 ( 2 Nos. ) • Diode 1N5408 ( 2Nos. ) • Diode Ba159 • Ac Phase Control By Gate Control Firing Circuit. • Snubber Circuit. Load: • 1 / 2Hp Dc Shunt Motor. • Inductor As Load 230V, 1A • Lamp Load 230V, 60W 97 Μcontroller Based 3-Ph Syn. Motor Drive: Trainer Kit For Controlling The Speed Of Synchronous Motor ( 1Kva ) Drive Using Μc. 98 Demonstartion Kit Showing Different Types Of Power Semiconductor Devices With Heat Shink E.G. Scr, Igbt, Gto, Mosfet, Standard For Laboratory Purpose. 99 Kit For Magnetic Control Of Im: Control And Power Circuit For ( I ) Forward And Reverse Rotation Of Squirrel Cage Im Using Contactor, ( Ii ) Automatic Star-Delta Starter Of Squirrel Cage Im, ( Iii ) Dynamic Braking Of Squirrel Cage Im, Standard For Laboratory Purpose. 100 Screw Driver Set, Standard For Laboratory Purpose. 101 6” Slide Range, Standard For Laboratory Purpose. 102 Wire Stripper, Standard For Laboratory Purpose. 103 Crimping Tool ( 1 Sq. Mm. To 6 Sq. Mm. ) . 104 2.5 Sq. Mm. Stranded Pvc Copper Wire 105 1.5 Sq. Mm. Stranded Pvc Copper Wire 106 1 Sq. Mm. Stranded Pvc Copper Wire 107 Soldering Kit: 20W With Solder Material 108 Contact Type Tachometer ( Range: 0-10, 000 Rpm ) 109 Set-Up With Different Type Tl Lamps ( Conventional & Led ) With Fittings Containing Electrimagnetic Ballast / Electronic Ballast Etc.: Tl Fittings With: 1. Electronic & Electromagnetic Ballast For ( I ) Single 40W, 240V, 50Hz Tl, ( Ii ) 2X40w, 240V, 50Hz Tl, 2. 20W Led Tl With Fittings Incl. 110 3-Ph Capacitor Bank Of 2-4Kva For Correcting Power Factor Of 415V, 50Hz, 1500 Rpm, 2Hp, 3-Ph Squirrel Cage Im With Facility To Connect The Stator Of The 3-Ph Im Both In Star & Delta Mode And A Tri-Vector Meter Having Facility To Measure Kw, Kva, Kwh, Kvarh, Pf. 111 Transformer Oil Breakdown Strength Kit: Breakdown Strength Kit With 5 Ltr. Fresh Transformer Oil, Standard For Laboratory Purpose. 112 Chart For Demonstration Of Different Fire Extinguishers: Colour Flex Chart Describing Different Types Of Fire Extinguishers ( 4 X 3 ) , Material: Pvc, With Roller 113 Chart For Demonstration Of Artificial Respiration ( Cpr ) And Prepare A Report.: Colour Flex Chart Describing Different Types Of Artificial Respiration ( Cpr ) ( 4 X 3 ) , Material: Pvc, With Roller.
Contract Date: Dec 10, 2024 Contract Value : ₹ 11.21 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
37.
Textiles #10732252 AOC
Supply, Installation, Testing And Commissioning Of Cctv Surveillance System At 140 Warehouse Locations-2 Supply & erecting of high defination 5 MP IP IR Bullet camera with Sensor : 1/3, progressive scan, 5.0 megapixel, CMOS, Lens : [email protected]/ [email protected], Shutter Speed : Auto/Manual, 1 ~ 1/100000s, Digital noise reduction : 2D/3D DN, Day/Night : IR-cut filter with auto switch (ICR), Minimum Illumination: Colour: 0.03Lux (F2.0, AGC ON) 0Lux with IR, IR Range : Up to 30m (98ft) IR range, S/N : >56dB, Defog:Digital Defog , WDR: DWDR/ True WDR, Resolution : 5 MP or better ( 2592x1944), Video Compression : H.265 / H.265+, High Light Compensations : TRUE, Back Light Compensations :TRUE,Network : 1 RJ45 100M Base-TX Ethernet, Audio : Audio In / Out Support,Power : 12V DC / PoE, Housing : IP67 , CERTIFICATION : Vendor should submit Mfr. Test Certificate,Cyber Security : AES 256-bit Encryption, Configuration encryption, trusted execution, digest, security logs,WSSE ,account lockout,syslog, video encryption, IP/MAC filtering ,HTTPS,Trusted upgrade,trusted boot., ANR Support : Yes with 512 GB For details technical specification no 13. 3 Supply, installation, testing and commissioning of 8 channel network video recorder with Processor : Quad-core embedded processor, IP Camera Input : 8 channels, Operating System : Embedded LINUX, Two-way Talk : 1 Channel Input, 1 Channel Output, RCA, User Interface : GUI, Video Output : 2 HDMI, 2 VGA, Compression : Smart H.265+/H.265/Smart H.264+/H.264/MJPEG, Decoding Capability : 8-ch@1080P(30fps), 16-ch@1080P(30fps), OSD : Camera title, Time, Camera lock, Motion detection, Recording, Video Resolution : HDMI: 3840 × 2160 , 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768 and VGA: 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768, Video Recording : Max 160 Mbps, Video Display Split : 1st Screen: 1/4/8/9/16, 2nd Screen: 1/4/8/9, Motion Detection : MD Zones: 396(22×18). Video Loss: supports, Camera Blank : Supports,Hard Disk : 2 SATA ports, up to 10TB Each, 1 eSATA port, Smart Phone : iPhone, iPad, Android Phone, Trigger Events : Recording, PTZ, Tour, Alarm, Video Push, Email, FTP, Snapshot, Buzzer & Screen tips, Recording Mode : Manual; schedule (general; MD; alarm; MD & alarm; intelligent; POS), Search Mode : Time /Date, Alarm, MD and Exact Search (accurate to second) , Bit Rate : 16Kbps ~ 20Mbps Per Channel , Sync Playback : 1/4/9/16 , Playback : Play, Pause, Stop, Rewind, Fast play, Slow play, Next file, Previous file, Next camera, Previous camera, Full screen, Repeat, Shuffle, Backup selection, Digital zoom , Backup Mode : USB Device/Network, Interface Ports : 2 USB Ports (1 Rear USB 3.0 , 1 Front USB 2.0 ), 1 RS232, 1 RS485 , Max User Account : 128 users , Record Interval : 1~120 min (default: 60 min), Pre-record: 1~30 sec, Post-record: 10~300 sec , Ethernet : 1 RJ-45 Port (10/100/1000Mbps) , Protocols : HTTP, HTTPS, TCP/IP, IPv4/IPv6, UPnP, SNMP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search , ONVIF 2.4, SDK, CGI , Power Supply : Single, AC 100~240V, 50/60 Hz/Single, DC12V/4A , Power Consumption : <9.5W (Without HDD) , Certification : UL,CE,FCC,BIS For details technical specification no 16. 4 Supply, installation, testing and commissioning of 16 channel network video recorder with Processor : Quad-core embedded processor, IP Camera Input : 16 channels, Operating System : Embedded LINUX, Two-way Talk : 1 Channel Input, 1 Channel Output, RCA, User Interface : GUI, Video Output : 2 HDMI, 2 VGA, Compression : Smart H.265+/H.265/Smart H.264+/H.264/MJPEG, Decoding Capability : 16-ch@1080P(30fps), OSD : Camera title, Time, Camera lock, Motion detection, Recording, Video Resolution : HDMI: 3840 × 2160 , 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768 and VGA: 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768, Video Recording : Max 300 Mbps or better, Video Display Split : 1st Screen: 1/4/8/9/16, 2nd Screen: 1/4/8/9, Motion Detection : MD Zones: 396(22×18). Video Loss: supports, Camera Blank : Supports,Hard Disk : 4 SATA ports, up to 16TB Each, 1 eSATA port, Smart Phone : iPhone, iPad, Android Phone, Trigger Events : Recording, PTZ, Tour, Alarm, Video Push, Email, FTP, Snapshot, Buzzer & Screen tips, Recording Mode : Manual; schedule (general; MD; alarm; MD & alarm; intelligent; POS), Search Mode : Time /Date, Alarm, MD and Exact Search (accurate to second) , Bit Rate : 16Kbps ~ 20Mbps Per Channel , Sync Playback : 1/4/9/16 , Playback : Play, Pause, Stop, Rewind, Fast play, Slow play, Next file, Previous file, Next camera, Previous camera, Full screen, Repeat, Shuffle, Backup selection, Digital zoom , Backup Mode : USB Device/Network, Interface Ports : 2 USB Ports (1 Rear USB 3.0 , 1 Front USB 2.0 ), 1 RS232, 1 RS485 , Max User Account : 128 users , Record Interval : 1~120 min (default: 60 min), Pre-record: 1~30 sec, Post-record: 10~300 sec , Ethernet : 1 RJ-45 Port (10/100/1000Mbps) , Protocols : HTTP, HTTPS, TCP/IP, IPv4/IPv6, UPnP, SNMP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search , ONVIF 2.4, SDK, CGI , Power Supply : Single, AC 100~240V/Single, DC12V/4A , 50/60 Hz , Power Consumption : <16.7W (Without HDD) , Certification : UL,CE,FCC,BISFor details technical specification no 15. 5 Supply, installation, testing and commissioning of 32 channel network video recorder with Processor : Quad-core embedded processor, IP Camera Input : 32 channels, Operating System : Embedded LINUX, Two-way Talk : 1 Channel Input, 1 Channel Output, RCA, User Interface : GUI, Video Output : 2 HDMI, 2 VGA, Compression : Smart H.265+/H.265/Smart H.264+/H.264/MJPEG, Decoding Capability : 32-ch@1080P(30fps), OSD : Camera title, Time, Camera lock, Motion detection, Recording, Video Resolution : HDMI: 3840 × 2160 , 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768 and VGA: 1920 × 1080 , 1280 × 1024, 1280 × 720 , 1024 × 768, Video Recording : Max 320Mbps, Video Display Split : 1st Screen: 1/4/8/9/16/25/36, 2nd Screen: 1/4/8/9/16, Motion Detection : MD Zones: 396(22×18). Video Loss: supports, Camera Blank : Supports, Hard Disk : 4 SATA ports, up to 20TB Each, 1 eSATA port, Smart Phone : iPhone, iPad, Android Phone, Trigger Events : Recording, PTZ, Tour, Alarm, Video Push, Email, FTP, Snapshot, Buzzer & Screen tips, Recording Mode : Manual; schedule (general; MD; alarm; MD & alarm; intelligent; POS), Search Mode : Time /Date, Alarm, MD and Exact Search (accurate to second) , Bit Rate : 16Kbps ~ 20Mbps Per Channel , Sync Playback : 1/4/9/16 , Playback : Play, Pause, Stop, Rewind, Fast play, Slow play, Next file, Previous file, Next camera, Previous camera, Full screen, Repeat, Shuffle, Backup selection, Digital zoom , Backup Mode : USB Device/Network, Interface Ports : 2 USB Ports (1 Rear USB 3.0 , 1 Front USB 2.0 ), 1 RS232, 1 RS485 , Max User Account : 128 users , Record Interval : 1~120 min (default: 60 min), Pre-record: 1~30 sec, Post-record: 10~300 sec , Ethernet : 1 RJ-45 Port (10/100/1000Mbps) , Protocols : HTTP, HTTPS, TCP/IP, IPv4/IPv6, UPnP, SNMP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search , ONVIF 2.4, SDK, CGI , Power Supply : Single, AC 100~240V, 50/60 Hz , Power Consumption : <16.7W (Without HDD) , Certification : UL,CE,FCC,BISFor details technical specification no 14. 6 Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210 MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD 7 Supplying & erecting( 32 Monitor ) 32 professional LED display with 1920*1080 (Full HD) Display, suitable for 16/32 channel NVR and following features Brightness: minimum 250 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc.complete. 8 Supplying & erecting (43 Monitor ) 43 professional LED display with 1920*1080 (Full HD) Display, suitable for 16/32 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete. 9 Supplying & erecting (49 Monitor ) 49professional LED display with 1920*1080 (Full HD) Display, suitable for 32/64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete. 10 Supplying, erecting & terminating 5 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pin HDMI connectors complete. 11 Providing & erecting 7 m high (clear height) galvanised Each octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no.OH-PL/OPL. 12 Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mmstonemetal,(45 x45 x45)cm/45cmdia.x45cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles) 13 Supplying and erecting Lshape mounting for camera (Extender) etc complete as directed by engineer in charge. 14 Supplying , fixing and configuring ethernet managed ethernet each switch of minimum of 24 ports 10/100/1000 Base-T PoE+ ports with min 180W power and 2x 1G SFP portsand 1 x Out of Band IP based management Port with CL1 provided, switch of min. 36 Gbps or morewith non-blocking architecture forwarding rate of 26.8 Mpps rack, equipped with minimum 512MB RAM and 128MB flash, should have LED indicator for per port status, FAN, PSU and Management status and sustain 0°C to 50°C OT and 10% to 95% RH as directed. It should support for IPv6 , cover transmission distance of 250 meter. The swithching and routing should have 16 K MAC Address, 255 active Vlans, 802.1D spanning Tree, 802.1w, 802.1s, should have BPDU Guard, support aggregating and load balancing, 802.1 AK for dynamic VLAN propagation, Local and Remote port mirroring, Link Layer Discovery Protocol (802.1ab), MAC address tracking and address addition, delete or movement. The secutrity LA database for RADIUS Authentication for 802.1x login, SSH-2, SCP for secure management, dynamic arp inspection, DHCP snooping with min50 ACL entry support. Management should consist scheduled archiving / uploading of configuration and system log to a central server, Auto-install support for firmware images and configuration files and vendor shouldsubmit Mfr Test Certificate along with supply as directed by Engineer in chargeas per technical specification no. 1 complete. 15 Supplying , fixing and configuring ethernet managed ethernet each switch of minimum of8 Ports 10/100/1000 Mbps PoE+ 2 nos of1G SFP Ports, 2 Uplink ports, Protocol: IEEE802.3af, IEEE802.3at, Hi-PoE, consumption of PoE Budget: 120 W, with switching capacity 20 Gbp, FR rate 11.90 Mbps, buffer memory 1.5MB, should covertransmission distance 250 meter, MAC Address List- 8k. The lighting protection 6KV, working temperature –10° C to 55° C (14° F to 131° F), Electromagnetic- FCC CFR 47 FCC Part 15 Subpart B, Conforms to CE Standards. Vendor should submit Mfr Test Certificate along with supply as directed by engineer in chargeas per technical specification no. 2 complete. 16 Supplying & erecting Mode SFP transceiver of Single LC receptacle optical interface compliant with 7dB gainetc model, Hot-pluggable SFP footprint type, OW of 1310nm FP laser transmitter, standard RoHS compliant and Lead Free, should reach Up to 10 km on 9/125um SMF, with Metal enclosure for lower EMI, Low power dissipation <600mW, should sustain 0~50°C, Same as Switch make, Vendor should submit Mfr Test Certificate along with supply and complete as directed by engineer in chargeas per technical specification no. 3 complete. 17 Supplying and installing UTP CAT6 copper cablesuitable for networking of type 23 AWG Solid Bare Copper, Unshielded Twisted 4 Pair, Category 6, LSZH jacket complying to testing, cable outer diameter of 5.8mm, frequency 600 MHz; ETL Test Reports of ANSI/TIA-568-C.2 & ISO/IEC 11801 of cable performance upto 600 MHz provided conduit/casing-n-cappingas directed by engineer in charge and per technical specification no. 11. 18 Supplying, installing and testing UTP connector (RJ-45) as per specification no. WG-NAS/UTPC 19 Supplying and fixing 1 m UTP patch cordof Cat 6 type Electrical performance guaranteed to meet or exceed TIA/EIA 568-B 2-1 category 6 and ISO /IEC Category 6/class,certification UL listed, UL-C certified, different color (Green, orange and red with connector complete as directed by engineer in charge and submit mfr test reportas per technical specification no. 12 complete 20 Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. 21 Supplying and installing 6 core Optical Fiber unarmored cable unitube gel filled for access outside building Single Mode, 9/125 microns, bending radious of not more than 20X , 10 GBPS speed compliant to IEC 60793/IEC 60794 standards, change in Attenuation < = 0.05 db/km, Tensile strength >=300 N, Maximum Crush Resistance 1000 N/100mm,OT of -300 C to 500 C, storage temperature of -400 C to 550 C, of standards ISO/IEC11801 TIA/EIA-568-B, Vendor should submit Mfr Test Certificate along with supply complete as directed by engineer in chargeas per technical specification no. 6 complete. 22 Power Cable (MCB with closed box, single phase) -Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper m PVC unarmoured cable provided conduit/trunking/inside pole/Bus bars or any other places. as per technical specification No: 17 23 PVC Conduit with Hanging wire -Supplying & laying HMS PVC conduit 32 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (1-1-12) 24 Supplying and fixing 6 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fiber cables in provided U rack complete as per specification no. WG-NAS/ LIU 25 Supplying and fixing LIU 12 Port loaded SM with SC connectors ports provision for 12 Nos. of SC Termination. light guide unloaded interconnect unit, rack mounted type, with adapter panel Fully loaded with SCtype duplexfor termination of optical fiber cables, 19 Rack mountingin provided U rack complete as per technical specification no. 7. 26 Supplying and erecting 12 core Fibre termination box (External rack) suitable for FTTx application,IP67 grade, accepts up to 12 fusion splice, splice tray should be with adaptors and couplers as per requirement, PVC, material of Solid and fully-closed structure of dust-proof, pleasing and neat appearance, ferruling of each core as per standards provided at the time of installation etc complete as directed by engineer in charge.Vendor should submit Mfr Test Certificate along with supplyas per technical specification no. 8 complete. 27 Supplying and erecting 6 core Fibre termination box (External rack) suitable for FTTx application,IP67 grade, accepts up to 6 fusion splice, splice tray should be with adaptors and couplers as per requirement, PVC, material of Solid and fully-closed structure of dust-proof, pleasing and neat appearance, ferruling of each core as per standards provided at the time of installation etc complete as directed by engineer in charge. Vendor should submit Mfr Test Certificate along with supplyas per technical specification no. 8 complete. 28 Supplying and installing single mode simplex pigtail with SC/LC splicing, SC Connector with single mode fiber pigtail (To be used for arc fusion splicing with Fiber cores termination inside LIU/fiber interconnecting panel.) Pigtail consists of pre-moulded/prefabricated SC type fiber connector at one end & another end fiber core with approx. 1 meter length as directed and Vendor should submit Mfr. Test Certificate along with supplyas per technical specification no. 10 complete 29 Supplying and erecting duplexOFC patch cord SC-LC typefibre patch cord, SC-SC /SC-LC duplex, of 1 meter lengthetc complete as directed by engineer in charge. Vendor should submit Mfr. Test Certificate along with supply.as per technical specification no. 9 complete 30 Supplying and fixing 6Uwall mount rack or better, Two Vertical and 2 horizontal cable managers, PD of 5 points- 5 AMP socket, depth of 550 mm or as per NVR sizing, Aluminum extruded profile,compliance CE & RoHS , Glass door in front with lock, With min 2 fans for outdoor,19” equipment mounting or extra width, with 1 tray, should confirm standard of DIN41494 or equivalent ISO9001:2015 and 14001:2015. Vendor should submit Mfr Test Certificate along with supply as directed by engineer in charge as per technical specification no. 5 complete. 31 Supplying and fixingOutdoor 4Uwall mount rack or size as per requirement; bidder to study each PoP location and confirm size in technical and commercial offer, one Vertical and one horizontal cable manager if required, power distrubution with min 3 points- 5 AMP socket or as per site requirement, depth of 400 mm, Aluminum extruded profile , IP rating of 67 if outdoor use,Glass door in front with lock or metal door with perforations, fan type ventilation to be provided for outdoor unit as per requirement at site. Vendor should submit Mfr Test Certificate along with supply as directed by engineer in charge as per technical specification no. 4 complete. 32 Supplying, erecting, testing and commissioning of 2KVA online UPS with Isolation Transformer& 2 KVA = 2 KW capacity online pure sine wave UPS, with batteries PWM & IGBT based, with 0.9 to unity output pf complete with all protections as per technical specification no. 18 complete.
Contract Date: May 15, 2026 Contract Value : ₹ 7.88 Crore
Government Departments No of Bidders 8
Maharashtra View Result →
38.
Chemicals and Fertilizers #10694190 Price Bid
Tender For Smart Valve Positioners For Control Valve Operation. Details Specification Is Given In Attached Annexure-1 & 2A Quantity=15 No. , Pneumatic Valve Positioners For Control Valve Operation. Details Specification Is Given In Attached Annexure-1 & 2A Quantity=20 No. , Smart Electro-Pneumatic Positioner, Single Acting, For Control Valve Operation, Including Position Feedback Transmitter Alongwith Mounting Kit. Details Specification Is Given In Attached Annexure-1 & 2B Quantity=54 No. , Smart Electro-Pneumatic Positioner, Double Acting, For Control Valve Operation, Including Position Feedback Transmitter Alongwith Mounting Kit. Details Specification Is Given In Attached Annexure-1 & 2B Quantity=3 No. , Smart Valve Positioners, Single Acting, For Urea Dcs Up-Gradation Project.Detailed Specifications Is Given In Attached Annexure-1 And2c Quantity=27 No. , Smart Valve Positioners, Double Acting, For Urea Dcs Up-Gradation Project.Detailed Specifications Is Given In Attached Annexure-1 And2c Quantity=3 No. => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 7
Punjab View Result →
39.
Educational and Research Institute #10629148 Price Bid
Supply Of Standalone Digital Lanuage Lab -2 Led Tv Nled Tv ( Smart Tv ) Nled Tv-55” Nproduct Type-Led Nscreen Size-55” Nresolution-3840×2160 Nsound Output-20W Nconnectivity-Usb, Hdml, Av Npower Supply –Ac, 100-240V 50 / 60 Hz N4khdr Support-Yes Naccessories: Nremote, Remote Battery, Power Cable, Mini Wall Mount Support, User Manual, Android Facility N 3 Speaker Box Nmodel-Spx-1200 Ninput Power-1000 Wrms Nconfiguration-Two Way Nfrequency Response-35-20, 000Hz Nhigh Frequency Unit -16”×7” Dynamic Hf Unit Nlow Frequency Speaker-2×15” Lf Speaker Nspl At ( 1W / 1M ) -103 Db Nmaximum Rated Spl-133Db Nnominal Impedance-4O Nport-Free Flow Flared Ninput Connectors-Terminal Strip + Speaker Ndimensions-W540×H1260×D480mm 4 Head Set With Mic N Crystal Clan Sound Microphone Noise Ncancellation Technology Mic Sensitivity -58Db And 2Db Head Phone Power Input 100 Mw Power Input 0.5 Ma. 5 Wireless Microphones Ncompact, Lightweight, Dual Channel Vhf Wireless Microphone System, Operates At Quartz Crystal Locked Vhf High Band Frequency And Available In Different Frequency Groups. Two Transmitters With Separate Frequencies And One Dual Channel Receiver, Internal Antenna In The Transmitter And Two Telescopic Antennas In The Receiver For Clear And Distortion Free Reception, Receiver Operates On 12V Dc Through An Ac Adaptor Supplied Alongwith The System. Each Transmitter Operates With A 2X1.5V Aa Pencil Cell, Transmitters Have 2-Position On / Off Slide Switch, Audio Output From Receiver Available At Out 1 & Out 2 Individually And As Mixed Output At Out 1 + 2, Ideal For: Pa Applications... Stage & Auditoriums... Seminar Halls... Places Of Worship... Recreation Centers N
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Tamil Nadu View Result →
40.
Drinking Water Supply and Sanitation #10523073 Price Bid
Tender For Interception & Diversion (I&D) & Stp For Existing Drain In Dhampur Town/Npp, Distt Bijnor - Civil Works of 7.2 MLD STP and 7 KLD Septage Co-Treatment Facilities 2 Design, Construction, Supply of all materials, Erection and Commissioning of 7.2 MLD STP and 7 KLD Septage Co-Treatment Facilities with all the civil,LT/HT panel room, sub station building, DG set foundation, admin buidling, laboratories, meter room and campus development [Construction of Internal Road (CC Road, 3.6m wide, area approx 2000sqm),fiiling of earth if required]fully furnished administrative building having fully functional testing laboratory, PLC/SCADA Rooms, Power Generation building, Blower building, sludge handling system & other building required for technology proposed. OCEMS system at inlet & outlet of STP and master control station (MCS) at STP. Conference room suitable for 15 people, 4 rooms with a attached toilet for supervisory staff and a toilet block, drinking water cooler, all office rooms and conference room (Air Conditioned)., staff quarters as per requirement and specification, external water supply (20KL tank including tube well and pumping arrangement,sanitation work) etc. all complete for STP with co-treatment facilities. STP shall be based on SBR Technology OR any proven technology. The effluent quality for agricultural uses (PH-6.5 TO 8.3, SS-30 mg/l, Oil&Grease-10 mg/l, BOD-10mg/l) , COD-30 mg/l , Residual chlorine-nil , TKN-10mg/l, Nitrate N-10 mg/l, F.C.-230 MPN/100 ml, Dissolved P-5 mg/l (preferable 2 mg/l). ) shall be maintained asper CPHEEO manuals. Latest NGT norms for effluent discharge shall be adhered. The cost is inclusive of (Peak flow 24.11 MLD) (civil works). 3 INTERCEPTOR SEWERExcavation below G.L. upto depth as specified for laying sewer and manhole ordinary soil (earth, sand, loam and clay) including cutting of joints pits ramming dressing) leveling, refilling of trenches in 20 cm layer watering and ramming the same including (8% reduction due to excavation already taken in manhole and SCC) 4 (a)0.00 to 1.50 m 5 (b) 01.50 to 03.00 m 6 (c) 03.00 to 04.50 m 7 Provide and fix close timbering in trenches for the depth as specified below G.L. consisting of 40 mm thick approved country wood plank for polling board 125 x 75 mm eucalyptus-Safeda-Sal Wood wallers and 100 mm dia ballies for shuttering at 1.5 m C/C including all labour etc , complete 8 (a)1.5 to 3 m 9 (b) 03.00 to 06.00 m 10 Same as item No. 3 but for open timbering (No timbering for depth <1.50m) 11 (a) 1.50 to 03.00 m 12 Timbering left in trenches (No timbering for depth <1.50m) 13 Open Timbering left in trenches (used timbering) 0-3m depth 14 Closed Timbering left in trenches(used timbering)0-3m depth 15 Closed Timbering left in trenches(used timbering)3-6m depth 16 Supply of following sizes of RCC spigotted and socketed non pressure pipes( Dia. In mm ) with structural strength as per IS 458 : 2003 and its latest amendment(s).NP3 17 600 mm dia 18 700 mm dia 19 Carting following sizes of R.C.C. Hume pipe NP3 Class Socket / spigot rubber ring jointing and specials from store to the work lowering and laying the same in to the trenches upto depth as specified below G.L. true to alignment600 mm dia pipe 20 01.50 - 0 3.00 m 21 03.00 - 04.50 m 22 700 mm dia pipe 23 01.50 - 0 3.00 m 24 Cement concrete work in bedding below G.L. at specified depth with cement, coarse sand and 20 mm gauge approved stone ballast (1:2:4) including supply of all materials, labour, T&P etc. required for the proper completion of work. 25 (c) 03.00 to 04.50 m 26 Filling granular material (well graded crushed rock or gravel maximum size 20mm) into the trenches for class B bedding (granular bedding) including watering compaction, labour T&P etc. for completion of work. 27 (b) 01.50 to 03.00 m 28 Supply (excluding cartage) of granular material (well graded crushed rock or gravel of maximum size 20mm)for class B bedding (granular bedding) 29 Construction of circular type brick masonry HD (HD25) manhole (with Extra Heavy Duty type manhole cover) with top slab made of cement concrete 1:1.5:3 with graded granite stone aggregate (12 mm nominal size), wall made of brick masonry using 1st class bricks having crushing strength between 100 to 149 kg/cm² in cement mortar 1:4 inside plastering 12 mm thick 1:4 finished smooth with neat cement, pinning, outside plaster 1:4 and making channels with cement concrete 1:2:4 graded granite stone aggregate (12 mm nominal size) complete with including Plastic Encapsulated M.S. foot Rest staggered at 0.375 mtr interval, including excavation, reinforcement. 30 1200mm internal dia., 3.30m deep 31 1500mm internal dia., 4.95m deep 32 Extra for every additional depth of 1 m or part there of in following size of circular manholes. 33 1200mm internal dia., 3.30m deep 34 1500mm internal dia., 4.95m deep 35 Dismantling/Cutting of Cement Concrete road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materialsas per direction of Engineer Incharge. 36 Reinstatement of Concrete road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials as per direction of Engineer Incharge. 37 Providing and erecting temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes hiring of Ballies and arrangement for traffic diversion such as traffic signals during construction at site as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). The rate is for unit length of pipe laying. 38 Disposal of Surplus Earth as per direction of Engineer Incharge. 39 Construction of Boundary Wall 2.0m ht. above plinth level 0.23m width with RCC Column @3m c/c with plinth beam and foundation avg. 2 m depth including reinforcement and RCC coping on top of wall with plaster (1:4) and painting (apex painting 3 coat) as per type design and drawing at the STP site 40 MS gate (3.6m wide with 1.50m wicket gate with 0.35 m x0.35m RCC piller) 41 Cnstruction of Intermediate Pumping Station (IPS) as per specification, accesory building & design approved by Engineer in Charge 42 Sewage Rising main from IPS Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as per direction of Engineer Incharge. 43 0.0 to 1.5 mtr. Depth (do - in all kindes of soil) 44 Supply of 400mm dia. DI K9 pipe and special for the pumping mains including all complete pipes conforming to IS : 8329- 400 mm 45 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc.(400mm) 46 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete 150 mm 47 Carting of 400mm dia DI K9 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc. 48 Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, withcast insitu RCCslab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing 49 Sluice valve, Air valve chambers 50 Dismantling/cutting of the BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 51 Reinstatement of the BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 52 Interception and diversion (I&D) Structure works 53 Cnstruction of Interception and Diversion Structure works as per specification, accesory building & design approved by Engineer in Charge 54 Treated Effluent line (400mm Dia DI K7) (STP to Disposal point (Khow river) 55 Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 m.0.0 to 1.5 mtr. Depth do - in all kindes of soil 56 Supply of 400mm dia. DI K7 pipe and special for the pumping mains including all complete Pipes conforming to IS : 8329- 400 mm 57 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc.all complete required for completion of work (400mm dia) 58 Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. all complete required for completion of work150 mm 59 Carting of 400mm dia DI K7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc. 60 Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, withcast insitu RCCslab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing. 61 Sluice valve, Air valve chambers 62 Dismantling/cutting of BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 63 Reinstatement of BOE road for laying sewers, manholes, sewer connection chambers etc.including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. 64 E/M WORKS 65 STP ( 7.2 MLD ) And Co Treat ment Plant ( 7 KLD ) 66 A. Design, Supply of all Materials, Erection, Testing,Commissioning and 3 month trial run Of Electrical, Mechanical & Instrumentation Equipments at STP (7.2 MLD )with all required electrical& mechanical works, PLC/SCADA work, electrification & street lighting work and Online Continuous Effluent Monitoring System (OCEMS) etc. all complete as per tender documentfor STP.The effluent quality for agricultural uses ( PH-6.5 TO 8.3,SS-30 mg/l, Oil & Greases -10mg/l, BOD- 10mg/l,COD-30 mg/l,Residual Chlorine-nil, TKN-10mg/l, Nitrate-10mg/l, FC-230MPN/100ml Dissolved P-5mg/l (preferable 2mg/l).) shall be maintained as per CPHEEO mannuals Latest NGT norms for effluent discharge shall be adhered. The rate is Considered for SBR Technology. The STP shall be capable to treat the raw sewage having minimum concentrationmentiond in CPHEEO mannual. Firm has to complete Design, Supply, Erection, Testing,Commissioning and 3 month trial run of Substation Work like HT Panel, Transformer & its associated equipments and DG Set Work with AMF Panelwith considering load of STP and MPS both.B. Design, Supply of all Materials, Erection and Commissioning and 3 month Trial Run of Co-Treatment Plant ( 7 KLD ) having manual screen with-SS 304 with bar size (50 mm x 10mm) and gaping 20 mm, Screw Pumps (2 Kl/h 1W+1S), Screw Press Machine (3 KL/H) with double cylinder having VFD for its operation , 1000 Lit. PVC tank for washing screw press machine. all type pipe and fittings, LT panel and cabling material,Dewatering Pumps (1W+ 1S), 2HP Blower with 6 Nos Diffusers etc complete. including Supply and 3 month trial run of 1 No. 1500 Lit. Cesspool Vehicle having 30 HP Reputed make Tractor (with Registration Certificate and insurance papers) 67 E./M. Works at MPS 68 Electrical Works 69 H.T.Panel( Comprising with 1 -I/C and 2 -O/G. (panels should be TYPE TESTED ASSEMBLY ( TTA) type only) 70 SITC of Indoor Type Floor mounted HT Panel with11 KV, 630/800 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details- 71 Supply installation testing and commissioning of Incoming Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturers own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. (1set, included in STP costing) 72 Supply Installation Testing and Commissioning Outgoing Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimalfailure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturers own make) having protectionsof 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) (2 sets, included in STP costing) 73 Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. (included in STP costing)3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) -60 metersTrench making and covering of trench in all respect.- 60 metersSITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) - 4 sets11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break Down Voltage 45 KV - 2.5 SqmTransformer:Suitable capacitywith Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer of suitable capacity rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. (included in STP costing) -- 2 Nos. 74 L.T. Panel (panels should be TYPE TESTED ASSEMBLY ( TTA) type only)SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operatedon 415 ± 6 %volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming ACB panels and 1 outgoing ACB panel, each consisting of following items -(i) 4 pole Microprocessor based release Draw out type ACB (Motorised charging type) ,630 A Rating ,50 kA- 1 No.(ii)C.Ts of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v)Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi)Frequency meter-1 No.(vii)KWH meter - 1 No. (viii)2 Pole over current relay& one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 6 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 63 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 3 Nos. outgoing panels for miscellaneousworks, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F) 4 pole Microprocessor based release Draw out type (Motorised charging type) ,630 A Rating ,50 kA Panel for DG sets incoming - 1 NO (G) Bus coupler arrangement in panels 75 LT Cable laying and jointing 76 Power and control cable-Supply of 185 sq. mm 3.5 core cable - 2 Run required for power fromeach Transformer to each L.T. panel , 50 sq. mm X3 core-1 run cable for power from starters to Motor including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation systemetc. complete in all respect. 77 Earthing 78 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. 79 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. 80 Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) 81 Charges of Electrical safety Clearance 82 Expenditure on B&L Form, Challan etc. 83 Proper fencing of substation portion as per I.E. rules. (Ref. Ongoing AMRUT Work Aligarh Sewarage) 84 STARTER PANEL 85 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 20 HP motor (To be fixed in composite panel of LT Panel) 86 Mechanical Works 87 PumpThesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 20 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (4W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 3110 lpmTotal Head= 16 M or as per designSpeed=980Quantity of pumps. 88 Guid Rail System 89 Guide rail system (Automatic coupling system) for 20 HP submersible pump setscomplete for above pump set.(6 Sets, included in item no. 51.01) 90 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (6 Sets, included in item no. 51.01) 91 Main piping and Valves.Main piping and valves 200 mm dia delivery, 350 mm diacommon header line. 92 Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable water 93 Material of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MS 94 Motor Operated Sluice Valves 95 Sluice Valve 200 mm dia 96 Sluice Valve 350 mm dia 97 Reflux Valve 98 Reflux valve 200 mm dia N.B. 99 PipingsNote : Regarding the size of pipes, Tee, Bend etc, contrctor is required to designed them self and may got it approved by the department before execution of works along with layout drawing taking 200mm pipe 60m and 350 mm pipe 15m . 100 200 mm, K9 delivery pipes for all six pumping plant 101 350 mm, K9 common header pipes 102 Specials like bend, tee, D Joint etc. 103 Nut Bolt, Washer Rubber packing etc 104 INSTALLATION, TESTING & COMMISSIONING 105 Installation & Commissioning of all 6 Nos. Pump set,Piping & Valves as mentioned in above. 106 Level Transmitter (For Hi-Lo cut-off & alarms) 107 SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. 108 Electro magnetic flow meter 109 SITC of CE/UL certified Electro magnetic flow metersuitable to measure 0 to 30 MLD flow to be fitted in 350 mm dia main header line. 110 E.O.T. Crane 111 SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. 112 Chequerred plate and guards 113 SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. 114 PAINTING 115 Painting of all pumps piping and valves with two coat enamel paint. 116 LIGHT WIRING & Electrification (Ref. UP Jal Nigam E&M SOR, 2019) 117 Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan 118 Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan 119 IPS Campus with Solar Panel and LED Light of 3 sets. 120 D.G. SET AND ACCESSORIES 121 SITC of Radiator Cooled and Turbo charged Silent type suitable capacity DG set , engine ,alternator capable of developingat 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. (1 set, included in stp costing) 122 SITC of PLC Based Auto main failure (AMF) Panel forDG Set fabricated from CRCA sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, operator interface panel complete in all respect.(1 Set, included in stp costing) 123 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required.(2 Job, included in stp costing) 124 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. (2 Jobincluded in stp costing) 125 Supply & Laying 50 mm X 6mm sizeGI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. (1 Job, included in stp costing) 126 Providing and Laying cable for DG Set to Panel ( armored aluminium )-(1 Job, included in stp costing) 127 Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 185 sq mm. (4 Jobs, included in stp costing) 128 SCREENS AND GATES: 129 Rising type thimble mounted CI Sluice Gates of reputed make at IPS 130 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at mid year peak discharge (1w+ 1s) 131 Packing and Frieght 132 Installation, Testing and Commissioning 133 AUTOMATION OF MPS 134 CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. 135 GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 136 CE/UL certified intellignet Smart Energy Meter 137 Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1) 138 160 AMP rating 139 Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. 140 CE/UL Certified Surge protector for control panel. 141 CE/UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters. 142 Security Survillance IP Camera with recorder 143 Installation, commissiong & testing of above automation work 144 Expenditure on Operation & Maintenance of MPS including automation, Diesel Consumption & Electricity Consuption During 3 month Trial and Run Period 145 E./M. Works at IPS Dhampur 146 Electrical Works 147 H.T.Panel( Comprising with 1 -I/C and 2 -O/G .(panels should be TYPE TESTED ASSEMBLY ( TTA) type only)SITC of Indoor Type Floor mounted HT Panel with11 KV, 630/800 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details- 148 Supply installation testing and commissioning of Incoming Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturers own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. 149 Supply Installation Testing and Commissioning Outgoing Panel comprising of following: - VCB 630/800 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimalfailure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturers own make) having protectionsof 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) 150 Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. 151 3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) 152 SITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) 153 11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break DownVoltage 45 KV 154 Transformer: 315 KVA with Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer of 315 KVA rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. 155 L.T. Panel (panels should be TYPE TESTED ASSEMBLY ( TTA) type only) 156 SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operatedon 415 ± 6 %volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming ACB panels and 1 No outgoing ACB panel, each consisting of following items -(i) 4 pole Microprocessor based release Draw out type ACB (Motorised charging type) ,630 A Rating ,50 kA- 1 No.(ii)C.Ts of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v)Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi)Frequency meter-1 No.(vii)KWH meter - 1 No. (viii)2 Pole over current relay & one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 3 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 400 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 2 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 100 A current rating, 50 KA short circuit breaking capacity With Microprocessor based release with adjustableadjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (E) 3 Nos. outgoing panels for miscellaneousworks, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (F)APFC Panel for total load.(G) 4 pole Microprocessor based release Draw out type (Motorised charging type) ,630 A Rating ,50 kA Panel for DG sets incoming - 1 NO (G) Bus coupler arrangement in panels 157 LT Cable laying and jointing 158 Power and control cable-Supply of 240 sq. mm 3.5 core cable - 2 Run required for power fromeach Transformer to each L.T. panel , 240 sq. mm X3 core-1 run cable for power from starters to 67 KW Motors & 35 sq. mm X3 core-1 run cable for power from starters to 15 KW Motors including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation systemetc. complete in all respect. 159 Earthing 160 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. 161 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. 162 Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) 163 Charges of Electrical safety Clearance 164 Expenditure on B&L Form, Challan etc. 165 Proper fencing of substation portion as per I.E. rules. (Ref. Ongoing AMRUT Work Aligarh Sewarage) 166 STARTER PANEL 167 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 90 HP motor (To be fixed in composite panel of LT Panel) 168 SITC of Compraising of Soft Starter, suitable to meet the basic requirement of motor protections and suitable to run 20 HP motor (To be fixed in composite panel of LT Panel) 169 Mechanical Works 170 Large PumpsThesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 90 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (2W+1S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 5750 lpmTotal Head= 40 M or as per designSpeed=980Quantity of pumps. 171 Guid Rail System 172 Guide rail system (Automatic coupling system) for 90 HP submersible pump setscomplete for above pump set.(3 Sets, included in item no. 94.01) 173 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (3 Sets, included in item no. 94.01) 174 Small Pumps 175 Thesubmersible non clog pumpset should be single stage having two vanes enclosedimpellercoupled with submersible motor of 20 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (1W+1S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump=2500 lpmTotal Head= 17 MSpeed=980Quantity of pumps. 176 Guid Rail System 177 Guide rail system (Automatic coupling system) for 20 HP submersible pump setscomplete for above pump set. (2 Sets, included in item no. 98.01) 178 Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle (2 Sets, included in item no.98.01) 179 Main piping and Valves. 180 200 mm dia delivery for small pumps and250 mm dia delivery for large pumps, 350 mm diacommon header line. 181 Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable water 182 Material of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MS 183 Motor Operated Sluice Valves 184 Sluice Valve 200 mm dia 185 Sluice Valve 250 mm dia 186 Sluice Valve 350 mm dia 187 Reflux Valve 188 Reflux valve 200 mm dia N.B. 189 Reflux valve 250 mm dia N.B. 190 PipingsNote : Regarding the size of pipes, Tee, Bend etc, contrctor is required to designed them self and may got it approved by the department before execution of works along with layout drawing . 191 200 mm, K9 delivery pipes for small pumping plants 192 250 mm, K9 delivery pipes for large pumping plants 193 350 mm, K9 common header pipes 194 Specials like bend, tee, D Joint etc. 195 Nut Bolt, Washer Rubber packing etc 196 INSTALLATION, TESTING & COMMISSIONING 197 Installation & Commissioning of allPump set,Piping & Valves as mentioned in above @5% of supplied items. 198 Level Transmitter (For Hi-Lo cut-off & alarms) 199 SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. 200 Electro magnetic flow meter 201 SITC of CE/UL certified Electro magnetic flow metersuitable to measure 0 to 30 MLD flow to be fitted in 350 mm dia main header line. 202 E.O.T. Crane 203 SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. 204 Chequerred plate and guards 205 SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition(3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. 206 PAINTING 207 Painting of all pumps piping and valves with two coat enamel paint. 208 LIGHT WIRING & Electrification (Ref. UP Jal Nigam E&M SOR, 2019) 209 Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan 210 Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan 211 IPS Campus with Solar Panel and LED Light of 3 sets. 212 D.G. SET AND ACCESSORIES 213 SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing 250 kVA at 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. 214 SITC of PLC Based Auto main failure (AMF) Panel for 250 KVA DG Set fabricated from CRCA sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, operator interface panel complete in all respect. 215 Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. B class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. 216 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. 217 Supply & Laying 50 mm X 6mm sizeGI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. 218 Providing and Laying cable for DG Set to Panel 240 sq mm X 3.5 core x 2 run( armored aluminium ). 219 Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 240 sq mm. 220 SCREENS AND GATES: 221 Rising type thimble mounted CI Sluice Gates of reputed make at IPS 222 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at peak load of full discharge (working) 223 Stainless steel Manual Bar Screen having bar size 50mmx10mm with (20 mm gaping) at peak load of full discharge( standby) 224 Packing and Frieght 225 Installation, Testing and Commissioning 226 AUTOMATION OF IPS 227 CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. 228 GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. 229 CE/UL certified intellignet Smart Energy Meter 230 Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1) 231 160 AMP rating 232 Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. 233 CE/UL Certified Surge protector for control panel. 234 CE/UL Certified 7 HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. 235 Security Survillance IP Camera with recorder 236 Installation, commissiong & testing of above automation work 237 3 month trial run of automation work 238 Expenditure on Operation & Maintenance of IPS during 3 month Trial and Run Period 239 Expenditure onDiesel Consumption of IPS during 3 month Trial and Run Period 240 Expenditure on Electricity Consuption of STP, MPS & IPS as per actual UPPCL bill during 3 month Trial and Run Period
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Uttar Pradesh View Result →
41.
Water Resources and Irrigation #10512078 Price Bid
Supply, Installation, Testing, Commissioning, Training, Maintenance, Electrification And Automation With Scada System Including Renovation, Furnishing Of Existing Barrage Control Room At Gaula, Barrage, Haldwani, Uttarakhand Under National Hydrolog , Supply Of Plc / Rtu System With Software Development Of Plc / Rtu, Control Panel With Front Door Opening Cabinet, Fitted With Power Buses, Mcbs & Modem. Suitable Power Supply To Power Up Plc / Rtu Panel, 7” Or Above Hmi Display & Industrial Type Electrical Fitting & Cabling With Suitable Conduits Complete For All Related Field Instruments, As Per Technical Specification. , Supply Of Shaft Encoder Based Rotary Position Sensor With Local Digital Display & Proximity Limit Switches Type Gate Position Sensors For Indication And Monitoring Of Spillway Gates, Intake Gates, Silt Flushing Gates Including Cabling & Integration With Plc / Rtu As Per Technical Specifications. , Supply Of 3 Phase Vfd Starter Panelfor Each Motor Of Barrage Gates Which Shall Consists Of Vfd, S.P.P, Mcb, Olr, Timer, Main Switches Including Cabling & Electronic Digital Indicator Complete As Per Technical Specifications. , Supply Of Lte Surveillance Ip Based 3G / 4G Bullet Camera With Sim Card Slot, 2 Mega Pixel 2 Or 4 Array / 72 Led Color Camera. 6 Or 8 Or 12Mm ( According To Site Suitability ) With Storage Facility Of At Least 24-Hour Video Recording, In Elegant Metal Die Cast Housing. Outdoor Weather Resistant Ip 66, For Monitoring The Gates Operation At Barrage & Head Regulators Complete As Per Technical Specifications. , Supply Of Pan Tilt Zoom ( Ptz ) 36 X Optical And 12 X Digital Zoom; 2 Mega Pixel Ip Based ( Digital ) Camera, 500 Mtrs. Night Vision ( Multiple Intelligent Array System ) In Ip66 Weather Resistant Outdoor Metallic Housing. Outdoor Weather Resistant Ip 66 Including Cabling Required For Monitoring. As Per Technical Specifications. , Supply Of Water Level Transmitter Non-Contact Radar Type Having 30M Range For Measuring Barrage Pond Level Including All Necessary Cabling With Suitable Conduits & Electrical Fittings & Mast Complete As Per Technical Specifications. , Supply Of Water Level Transmitter Non-Contact Radar / Ultrasonic Type Having 10M Range For Measuring Down Stream Discharge Of Head Regulator Of Main Canal, Including All Necessary Cabling With Suitable Conduits & Electrical Fittings & Mast Complete As Per Technical Specifications. , Supply Of Water Level Transmitter Non-Contact Radar Type Having 35M Range For Measurement Level / Discharge At Remote Monitoring Stations, Including All Necessary Cabling With Suitable Conduits & Electrical Fittings & Mast Complete As Per Technical Specifications. , Supply Of Datalogger / Rtu With 8 Channel Input Type With Gprs / Gsm Based Telemetry & Ip65 Enclosure Including Antenna And All Necessary Equipment For Data Transmission For Remote Monitoring Stations, As Per Technical Specifications. , Supply Of Datalogger / Rtu With 2 Channel Input Type With Gprs / Gsm Based Telemetry & Ip65 Enclosure Including Antenna And All Necessary Equipment For Data Transmission For Remote Monitoring Stations, As Per Technical Specifications. , Supply Of Solar Panel, Charger Regulator, Batteries, Lightening Arrestor With All Connectors, Cables And Conduit For Cables For Providing Un Interrupted Power Supply To Each Plc / Rtu And Instrumentation System, As Per Technical Specifications. , Supply Of Intelligent Field Controller / Rtu As Early Flood Warning Station With Software Development With Metallic Front Door Opening Cabinet, Fitted With Gprs / Gsm Modem& Siren At Specified Location, Along With Industrial Grade Electrical Fitting & Cabling With Suitable Conduits Complete, As Per Technical Specification. , Supply & Installation Of Air Conditioning System With Requisite Furniture, Renovation & Furnishing Of Existing Barrage Control Room For Establishment Of Scada Control Room Long With Necessary Electrical Fittings As Per Technical Specification. , Supply Of Early Streamer Emission ( Ese ) Lightning Arrestor ( Protection Radius 87 Mtr ) With All Necessary Accessories As Per Technical Specifications , Supply Of Main Plc Controller System With Firm Ware Based Hot Redundancy Which Shall Include Software Development Of Plc, Control Panel With Front Door Opening Cabinet, Fitted With Power Buses, Mcbs & Modem. All The Electrical Fittings Will Be Industrial Type. Including Suitable Switch Mode Power Supply ( Smps ) , 12” Or Above Display & Interconnection With Relatedplc / Rtu’S, Complete As Per Technical Specification. , Supply, Engineering And Development Of Customized Scada Software For Complete System With Life Time Licensed Version As Per Technical Specifications. , Supply Of Master Server Which Includes Server With Server Rack And Industrial Grade Monitor With Usb, Rs232 / Rs485, Ethernet Ports, Os Windows 8 Or Higher Compatible To Scada System Complete As Per Technical Specifications. , Network Video Recorder ( Nvr ) 32 Channel 1080 P Full Hd, Real Time Recording And Reviewing In Compression Format. With Hdd Along With Dedicated Sufficient Hard Drive To Have Memory Of At Least 30 Days As Per Technical Specifications. , Supply Of It Hardware Which Includes Required Static Ip, Router With Modem, Switch, Firewall System And A3 Color Printer As Per Technical Specifications. , Supply Of 75” Led Display / Video Wall Based System For Monitoring Of Scada & Surveillance System At Barrage Control Room As Per Technical Specifications , Supply Of Laptops & 4G / 3G Internet Dongle Along With Licenced Versionclient Scada Software For Remote Viewing & Monitoring Of Complete Scada System As Per Technical Specifications. , Supply Of Online 3 Kva Ups With Battery System For Power Back Up Of Barrage Control Room Equipment’S Including All Necessary Cabling & Electrical Fittings Complete As Per The Technical Specifications , Supply Of Diesel Generator Set 3 Phase 10.0 Kva With 04 Earth Pits For Earthing Along With Accessories Complete As Per Technical Specifications. , Installation, Testing & Commissioning Of Plc / Rtu System With Software Development Of Plc / Rtu, Control Panel With Front Door Opening Cabinet, Fitted With Power Buses, Mcbs & Modem.Suitable Power Supply To Power Up Plc / Rtu Panel, Including 7 Inches Or Above Hmi Display & Industrial Type Electrical Fitting & Cabling With Suitable Conduits Complete For All Related Field Instruments, As Per Technical Specification. , Installation, Testing & Commissioning Of Shaft Encoder Based Rotary Position Sensor With Local Digital Display & Proximity Limit Switches Type Gate Position Sensors For Indication And Monitoring Of Spillway Gates, Intake Gates, Silt Flushing Gates Including Cabling & Integration With Plc / Rtu As Per Technical Specifications. , Installation, Testing & Commissioning Of 3 Phase Vfd Starter Panelfor Each Motor Of Barrage Gates Which Consists Of Vfd, S.P.P, Mcb, Olr, Timer, Main Switches Including Cabling & Electronic Digital Indicator Complete As Per Technical Specifications. , Installation, Testing And Commissioning & Integration Of Lte Surveillance Ip Based 3G / 4G Bullet Camera With Sim Card Slot, 2 Mega Pixel 2 Or4 Array / 72 Led Color Camera. 6 Or 8 Or 12Mm ( According To Site Suitability ) With Storage Facility Of At Least 24-Hour Video Recording, In Elegant Metal Die Cast Housing. Outdoor Weather Resistant Ip 66, Communication With Nvr Located At Barrage Control Room For Monitoring The Gates Operation Complete As Per Technical Specifications. , Installation, Testing & Commissioning & Integration With Nvr Located At Barrage Control Room Of Pan Tilt Zoom ( Ptz ) Cameras, 36 X Optical And 12 X Digital Zoom; 2 Mega Pixel Ip ( Digital ) Camera, 500 Mtrs. Night Vision ( Multiple Intelligent Array System ) In Ip66 Weather Resistant Outdoor Metallic Housing. Outdoor Weather Resistant Ip 66 Including Cabling & Conducting Required For Monitoring. As Per Technical Specifications. , Installation, Testing & Commissioning Of Water Level Transmitter Non-Contact Radar Type Having 30 M Range For Measuring Barrage Pond Level. Including All Necessary Cabling, Conduits, Electrical Fitting & Mast Complete, As Per Technical Specifications. , Installation, Testing & Commissioning Of Water Level Transmitter Non-Contact Ultrasonic Type Having 10 M Range For Measuring Dowstream Water Level / Discharge Of Head Regulator Of Main Canal System. Including All Necessary Cabling, Conduits, Electrical Fitting & Mast Complete, As Per Technical Specifications. , Installation Testing And Commissioning Of Water Level Transmitter Non-Contact Radar Type Having 35M Range For Measurement Level / Discharge At Remote Monitoring Stations, Including All Necessary Cabling With Suitable Conduits & Electrical Fittings & Mast Complete As Per Technical Specifications. , Installation Testing And Commissioning Of Datalogger / Rtu With 8 Channel Input Type With Gprs / Gsm Based Telemetry & Enclosure Including Antenna And All Necessary Equipment For Data Transmission For Remote Monitoring Stations, As Per Technical Specifications. , Installation Testing And Commissioning Of Datalogger / Rtu With 2 Channel Input Type With Gprs / Gsm Based Telemetry & Enclosure Including Antenna And All Necessary Equipment For Data Transmission For Remote Monitoring Stations, As Per Technical Specifications. , Installation Testing And Commissioning Of Solar Panel, Charger Regulator, Batteries, Lightening Arrestor With All Connectors, Cables And Conduit For Cables For Providing Un Interrupted Power Supply To Instrumentation System, As Per Technical Specifications. , Installation Of Chain-Link Fencing Of ( 5M X 5M ) X 3M Along With Lockable Gates For External Protection Of Monitoring Station For Remote Monitoring & Early Warning Stations, Per Technical Specifications. , Installation Testing And Commissioning Of Intelligent Field Controller / Rtu As Early Flood Warning Station, With Software Development With Metallic Front Door Opening Cabinet, Fitted With Gprs / Gsm Modem & Siren At Bareli Town, Along With Industrial Grade Electrical Fitting & Cabling With Suitable Conduits Complete, As Per Technical Specification. , Installation, Testing & Commissioning Of Early Streamer Emission ( Ese ) Lightning Arrestorwith All Connectors, Cabling And All Required Accessories Etc As Per Technical Specifications , Installation, Testing & Commissioning Of Main Plc Controller System With Firm Ware Based Hot Redundancy Which Shall Include Software Development Of Plc, Control Panel With Front Door Opening Cabinet, Fitted With Power Buses, Mcbs & Modem.Including Suitable Switch Mode Power Supply ( Smps ) , 12” Or Above Display & Cabling With Industrial Grade Type Electrical Fittings For Related Remote Plc / Rtu’S, As Per Technical Specification. , Installation, Testing, Commissioning And Development Of Customized Scada Software For Complete System With Life Time Licensed Version As Per Technical Specifications. , Installation, Testing & Commissioning Of Master Server With Scada Software Which Includes Server With Server Rack And Industrial Grade Pc With Usb, Rs232 / Rs485, Ethernet Ports, Os Windows 8 Or Higher Compatible To Scada System Complete As Per Technical Specifications , Installation, Testing & Commissioning Of Network Video Recorder ( Nvr ) 32 Channel 1080 P Full Hd, Real Time Recording And Reviewing In Compression Format With Dedicated Hard Drive To Have Memory Of At Least 30 Days As Per Technical Specifications. , Installation, Testing & Commissioning Of It Hardware Which Includes Required Static Ip, Router With Modem, Switch, Firewall System And A3 Colour Printer As Per Technical Specifications , Installation, Testing And Commissioning Of 75” Led Display For Monitoring Of Scada & Surveillance System At Control Room As Per Technical Specifications , Charges For High Speed Synchronous Internet Connection ( Min. 8 Mbps Upload And Download Speed ) & Static Ip For Five Years. , Charges For High Speed 4G / 3G Internet Dongle For Laptop With Client Scada Software For Remote Viewing & Monitoring Of Systemfor Five Years. , Installation, Testing & Commissioning Of Online 3 Kva Ups With Battery System For Power Back Up Of Barrage Control Room Equipment’S As Per The Technical Specifications , Installation, Testing And Commissioning Of Diesel Generator Set 3 Phase 10.0 Kva With 04 Earth Pits For Earthing, Starter Panel, Energy Meter & Cabling Complete In All Respects As Per Technical Specifications. , Five Years Operation & Maintenance And Comprehensive Warranty For Gaula Barrage & Head Regulator Scada Based System As Per Price Schedule After Final Acceptance Of Scada & Surveillance System. This Includes Replacement Of Material & Consumable As & When Required At Bidders’ Cost. The Cost Of Communication For Gprs & Sim Charges For Data Transmission, Maintenance And Other Related Charges. Minimumone Service Engineer Shall Be Placed At Barrage Control Room For Operation Of Scada & Surveillance System. , Training Of The Purchasers Personnel At The Supplier’S Plant And / Or / Onsite In Assembly, Start Up, Operation, Maintenance And / Or Repair Of The Supplied Goods. Course Topics Will Include Sensor Calibration, Plc / Rtu & Scada Configuration, Data Downloading, Data Retrieval, Collection, Trouble Shooting, Processing Maintenance Requirements And Procedure For Equipment Configuration, Installation, Site Testing And Commissioning Including Training Kit Containing Course Material In Soft And Hard Copies.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 9
Uttarakhand View Result →
42.
Water Resources and Irrigation #10512072 Price Bid
Supply, Installation, Testing, Commissioning, Training, Maintenance, Electrification And Automation With Scada System Including Renovation And Furnishing Of Existing Barrage Control Room At Ramnagar Barrage, Uttarakhand Supply, Installation, Testing, Commissioning, Training, Maintenance, Electrification, Automation With Scada System Including Renovation And Furnishing Of Existing Barrage Control Room At Ramnagar Barrage, Uttarakhand Under National Hydrology Project , Supply Of Plc / Rtu System With Software Development Of Plc / Rtu, Control Panel With Front Door Opening Cabinet, Fitted With Power Buses, Mcbs & Modem.Suitable Power Supply To Power Up Plc / Rtu Panel, 7” Or Above Hmi Display & Industrial Type Electrical Fitting & Cabling With Suitable Conduits Complete For All Related Field Instruments, As Per Technical Specification. , Supply Of Shaft Encoder Based Rotary Position Sensor With Local Digital Display & Proximity Limit Switches Type Gate Position Sensors For Indication And Monitoring Of Spillway Gates, Intake Gates, Silt Flushing Gates Including Cabling & Integration With Plc / Rtu As Per Technical Specifications. , Supply Of 3 Phase Vfd Starter Panelfor Each Motor Of Barrage Gates Which Shall Consists Of Vfd, S.P.P, Mcb, Olr, Timer, Main Switches Including Cabling & Electronic Digital Indicator Complete As Per Technical Specifications. , Supply Of Lte Surveillance Ip Based 3G / 4G Bullet Camera With Sim Card Slot, 2 Mega Pixel 2 Or 4 Array / 72 Led Color Camera. 6 Or 8 Or 12Mm ( According To Site Suitability ) With Storage Facility Of At Least 24-Hour Video Recording, In Elegant Metal Die Cast Housing. Outdoor Weather Resistant Ip 66, For Monitoring The Gates Operation At Barrage & Head Regulators Complete As Per Technical Specifications. , Supply Of Pan Tilt Zoom ( Ptz ) 36 X Optical And 12 X Digital Zoom; 2 Mega Pixel Ip Based ( Digital ) Camera, 500 Mtrs. Night Vision ( Multiple Intelligent Array System ) In Ip66 Weather Resistant Outdoor Metallic Housing. Outdoor Weather Resistant Ip 66 Including Cabling Required For Monitoring. As Per Technical Specifications. , Supply Of Water Level Transmitter Non-Contact Radar Type Having 30M Range For Measuring Barrage Pond Level Including All Necessary Cabling With Suitable Conduits & Electrical Fittings & Mast Complete As Per Technical Specifications. , Supply Of Water Level Transmitter Non-Contact Radar / Ultrasonic Type Having 10M Range For Measuring Down Stream Discharge Of Head Regulator Of Main Canal, Including All Necessary Cabling With Suitable Conduits & Electrical Fittings & Mast Complete As Per Technical Specifications. , Supply Of Water Level Transmitter Non-Contact Radar Type Having 35M Range For Measurement Level / Discharge At Remote Monitoring Stations, Including All Necessary Cabling With Suitable Conduits & Electrical Fittings & Mast Complete As Per Technical Specifications. , Supply Of Datalogger / Rtu With 2 Channel Input Type With Gprs / Gsm Based Telemetry & Ip65 Enclosure Including Antenna And All Necessary Equipment For Data Transmission For Remote Monitoring Stations, As Per Technical Specifications. , Supply Of Solar Panel, Charger Regulator, Batteries, Lightening Arrestor With All Connectors, Cables And Conduit For Cables For Providing Un Interrupted Power Supply To Each Plc / Rtu And Instrumentation System, As Per Technical Specifications. , Supply Of Intelligent Field Controller / Rtu As Early Flood Warning Station With Software Development With Metallic Front Door Opening Cabinet, Fitted With Gprs / Gsm Modem& Siren At Specified Location, Along With Industrial Grade Electrical Fitting & Cabling With Suitable Conduits Complete, As Per Technical Specification. , Supply & Installation Of Air Condition System With Requisite Furniture And Renovation & Furnishing Of Existing Barrage Control Room For Establishment Of Scada Control Room Long With Necessary Electrical Fittings As Per Technical Specification Located At Adwa Barrage, Mirzapur , Supply Of Early Streamer Emission ( Ese ) Lightning Arrestor ( Protection Radius 87 Mtr ) With All Necessary Accessories As Per Technical Specifications , Supply Of Main Plc Controller System With Firm Ware Based Hot Redundancy Which Shall Include Software Development Of Plc, Control Panel With Front Door Opening Cabinet, Fitted With Power Buses, Mcbs & Modem. All The Electrical Fittings Will Be Industrial Type. Including Suitable Switch Mode Power Supply ( Smps ) , 12” Or Above Display & Interconnection With Relatedplc / Rtu’S, Complete As Per Technical Specification. , Supply, Engineering And Development Of Customized Scada Software For Complete System With Life Time Licensed Version As Per Technical Specifications. , Supply Of Master Server Which Includes Server With Server Rack And Industrial Grade Monitor With Usb, Rs232 / Rs485, Ethernet Ports, Os Windows 8 Or Higher Compatible To Scada System Complete As Per Technical Specifications. , Network Video Recorder ( Nvr ) 32 Channel 1080 P Full Hd, Real Time Recording And Reviewing In Compression Format. With Hdd Along With Dedicated Sufficient Hard Drive To Have Memory Of At Least 30 Days As Per Technical Specifications. , Supply Of It Hardware Which Includes Required Static Ip, Router With Modem, Switch, Firewall System And A3 Color Printer As Per Technical Specifications. , Supply Of 75” Led Display / Video Wall Based System For Monitoring Of Scada & Surveillance System At Barrage Control Room As Per Technical Specifications , Supply Of Laptops & 4G / 3G Internet Dongle Along With Licenced Versionclient Scada Software For Remote Viewing & Monitoring Of Complete Scada System As Per Technical Specifications. , Supply Of Online 3 Kva Ups With Battery System For Power Back Up Of Barrage Control Room Equipment’S Including All Necessary Cabling & Electrical Fittings Complete As Per The Technical Specifications , Supply Of Diesel Generator Set 3Phase 10.0 Kva With 04 Earth Pits For Earthing Along With Accessories Complete As Per Technical Specifications. , Installation, Testing & Commissioning Of Plc / Rtu System With Software Development Of Plc / Rtu, Control Panel With Front Door Opening Cabinet, Fitted With Power Buses, Mcbs & Modem.Suitable Power Supply To Power Up Plc / Rtu Panel, Including 7 Inches Or Above Hmi Display & Industrial Type Electrical Fitting & Cabling With Suitable Conduits Complete For All Related Field Instruments, As Per Technical Specification. , Installation, Testing & Commissioning Of Shaft Encoder Based Rotary Position Sensor With Local Digital Display & Proximity Limit Switches Type Gate Position Sensors For Indication And Monitoring Of Spillway Gates, Intake Gates, Silt Flushing Gates Including Cabling & Integration With Plc / Rtu As Per Technical Specifications. , Installation, Testing & Commissioning Of 3 Phase Vfd Starter Panelfor Each Motor Of Barrage Gates Which Consists Of Vfd, S.P.P, Mcb, Olr, Timer, Main Switches Including Cabling & Electronic Digital Indicator Complete As Per Technical Specifications. , Installation, Testing And Commissioning & Integration Of Lte Surveillance Ip Based 3G / 4G Bullet Camera With Sim Card Slot, 2 Mega Pixel 2 Or4 Array / 72 Led Color Camera. 6 Or 8 Or 12Mm ( According To Site Suitability ) With Storage Facility Of At Least 24-Hour Video Recording, In Elegant Metal Die Cast Housing. Outdoor Weather Resistant Ip 66, Communication With Nvr Located At Barrage Control Room For Monitoring The Gates Operation Complete As Per Technical Specifications. , Installation, Testing & Commissioning & Integration With Nvr Located At Barrage Control Room Of Pan Tilt Zoom ( Ptz ) Cameras, 36 X Optical And 12 X Digital Zoom; 2 Mega Pixel Ip ( Digital ) Camera, 500 Mtrs. Night Vision ( Multiple Intelligent Array System ) In Ip66 Weather Resistant Outdoor Metallic Housing. Outdoor Weather Resistant Ip 66 Including Cabling & Conducting Required For Monitoring. As Per Technical Specifications. , Installation, Testing & Commissioning Of Water Level Transmitter Non-Contact Radar Type Having 30 M Range For Measuring Barrage Pond Level. Including All Necessary Cabling, Conduits, Electrical Fitting & Mast Complete, As Per Technical Specifications. , Installation, Testing & Commissioning Of Water Level Transmitter Non-Contact Radar / Ultrasonic Type Having 10 M Range For Measuring Dowstream Water Level / Discharge Of Head Regulator Of Main Canal System. Including All Necessary Cabling, Conduits, Electrical Fitting & Mast Complete, As Per Technical Specifications. , Installation Testing And Commissioning Of Water Level Transmitter Non-Contact Radar Type Having 35M Range For Measurement Level / Discharge At Remote Monitoring Stations, Including All Necessary Cabling With Suitable Conduits & Electrical Fittings & Mast Complete As Per Technical Specifications. , Installation Testing And Commissioning Of Datalogger / Rtu With 2 Channel Input Type With Gprs / Gsm Based Telemetry & Enclosure Including Antenna And All Necessary Equipment For Data Transmission For Remote Monitoring Stations, As Per Technical Specifications. , Installation Testing And Commissioning Of Solar Panel, Charger Regulator, Batteries, Lightening Arrestor With All Connectors, Cables And Conduit For Cables For Providing Un Interrupted Power Supply To Instrumentation System, As Per Technical Specifications. , Installation Of Chain-Link Fencing Of ( 5M X 5M ) X 3M Along With Lockable Gates For External Protection Of Monitoring Station For Remote Monitoring & Early Warning Stations, Per Technical Specifications. , Installation Testing And Commissioning Of Intelligent Field Controller / Rtu As Early Flood Warning Station, With Software Development With Metallic Front Door Opening Cabinet, Fitted With Gprs / Gsm Modem & Siren At Bareli Town, Along With Industrial Grade Electrical Fitting & Cabling With Suitable Conduits Complete, As Per Technical Specification. , Installation, Testing & Commissioning Of Early Streamer Emission ( Ese ) Lightning Arrestorwith All Connectors, Cabling And All Required Accessories Etc As Per Technical Specifications , Installation, Testing & Commissioning Of Main Plc Controller System With Firm Ware Based Hot Redundancy Which Shall Include Software Development Of Plc, Control Panel With Front Door Opening Cabinet, Fitted With Power Buses, Mcbs & Modem.Including Suitable Switch Mode Power Supply ( Smps ) , 12” Or Above Display & Cabling With Industrial Grade Type Electrical Fittings For Related Remote Plc / Rtu’S, As Per Technical Specification. , Installation, Testing, Commissioning And Development Of Customized Scada Software For Complete System With Life Time Licensed Version As Per Technical Specifications. , Installation, Testing & Commissioning Of Master Server With Scada Software Which Includes Server With Server Rack And Industrial Grade Pc With Usb, Rs232 / Rs485, Ethernet Ports, Os Windows 8 Or Higher Compatible To Scada System Complete As Per Technical Specifications , Installation, Testing & Commissioning Of Network Video Recorder ( Nvr ) 32 Channel 1080 P Full Hd, Real Time Recording And Reviewing In Compression Format With Dedicated Hard Drive To Have Memory Of At Least 30 Days As Per Technical Specifications. , Installation, Testing & Commissioning Of It Hardware Which Includes Required Static Ip, Router With Modem, Switch, Firewall System And A3 Colour Printer As Per Technical Specifications , Installation, Testing And Commissioning Of 75” Led Display For Monitoring Of Scada & Surveillance System At Control Room As Per Technical Specifications , Charges For High Speed Synchronous Internet Connection ( Min. 8 Mbps Upload And Download Speed ) & Static Ip For Five Years. , Charges For High Speed 4G / 3G Internet Dongle For Laptop With Client Scada Software For Remote Viewing & Monitoring Of Systemfor Five Years. , Installation, Testing & Commissioning Of Online 3 Kva Ups With Battery System For Power Back Up Of Barrage Control Room Equipment’S As Per The Technical Specifications , Installation, Testing And Commissioning Of Diesel Generator Set 3 Phase 10.0 Kva With 04 Earth Pits For Earthing, Starter Panel, Energy Meter & Cabling Complete In All Respects As Per Technical Specifications. , Five Years Operation & Maintenance And Comprehensive Warranty For Ramnagar Barrage & Head Regulator Scada Based System As Per Price Schedule After Final Acceptance Of Scada & Surveillance System. This Includes Replacement Of Material & Consumable As & When Required At Bidders’ Cost. The Cost Of Communication For Gprs & Sim Charges For Data Transmission, Maintenance And Other Related Charges. Minimum One Service Engineer Shall Be Placed At Barrage Control Room For Operation Of Scada & Surveillance System. , Training Of The Purchasers Personnel At The Supplier’S Plant And / Or / Onsite In Assembly, Start Up, Operation, Maintenance And / Or Repair Of The Supplied Goods. Course Topics Will Include Sensor Calibration, Plc / Rtu & Scada Configuration, Data Downloading, Data Retrieval, Collection, Trouble Shooting, Processing Maintenance Requirements And Procedure For Equipment Configuration, Installation, Site Testing And Commissioning Including Training Kit Containing Course Material In Soft And Hard Copies.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 9
Uttarakhand View Result →
43.
Educational and Research Institute #10497665 Price Bid
Supply Of Ecelab Items , Lvdt Characteristics Kitlvdt Sensor With: 0 - 20Mm Micrometer Range: Displacement : ±10Mm Calibration Range: Output Voltage : 0 - 2V Output Display :3 ½ Digit 7 Segment Led Display Cabinet :Closed Type Wooden / Metal Box , Strain Measurement Using Strain Gauge Strain Gauge Sensor : 1Kg Capacity Signal Conditioner: 2V Output Output Display :3 ½ Digit 7 Segmentled Display Cabinet :Closed Type Wooden / Metal Box Input: 230V, Ac , Temperature Measurement Trainer Using Thermistor ;Thermister:10K Measurement:0-100C Electric Kettle:1 No. Thermometer:0-110C Power Supply:Inbuilt Cabinet :Closed Type Wooden / Metal Box , Series And Parallel Resonance Kitinput : Power Supply Signal Source : Sine Wave Output Frequency: 100Hz To 10Khz Protection: Overload Protection Closed Wood / Metal Box , Dc Regulated Power Supply 0 - 30V 2Asingle Output Model: Jerps - Sv302 , Dual Trace Crosignalbandwidth : 100 Mhz Real Time Sampling:Max 1 Gsa / S Equivalent Sampling Rate: Max 50 Gsa / S 7.0 Tft Lcd Color Display 2 Mpts Memory Depth . Independent Vertical Scale & Position Control Knobs For Each Channel , Analog Voltmeterdifferent Ranges , Analog Ammeter Different Ranges , Galvanometer Range : ±35?A Internal Resistance : 1000 Ohms , Plc Trainer Kit8 Digital Inputs & 6 Digital Outputs 24V Power Supply Rs-232 Communication Cable From Plc To Systemled Indication In The Outputs Proper Termination Of Inputs Outputs & Power Supplies , Ic Storage Rack25 Compartment , Symmetrical T And ? Attenuatorspower Supply Inbuilt T-Network Circuit ?- Network Circuit Closed Wood Box / Metalbox , Two Way Cross Over N / W Power Supply Inbuilt Closed Wood Box / Metal Box , Edc Trainer Kitpower Supply Inbuilt Closed Wood Box / Metal Box , 8051 Microcontroller Kitprocessor : 89C51 Microcontroller, 12Mhz Clock Speed Program Memory Ram – 32Kb Data Memory Ram – 32Kb Program Memory Eprom – 32Kb 16 X 2 Lcd Display , Digital I / O Interface Board8nos. Input Switches And 8Nos. Ofoutput Leds Output Devices Relay, Buzzer, Led 26 Pin Frc Connector , Seven Segment Led Display Interface Board4 X 4 Matrix 16 Key Keyboard, 8 Nos. Of Output Led. 26 Pin Frc Connector Closed Wooden Cabinet , 8 Bit Dac Interface Board One Channel Dac Output, 8 Bit Input From The Controller External Power Supply Is To Be Provided ±12V Closed Wooden / Ms Cabinet , Stepper Motor Control Interface Board Stepper Motor And Driver Circuit For The Stepper Motor Switches To Give Control Inputs ( Direction, Speed, Step ) Closed Wooden / Metal Cabinet , Dc Motor Control Interface Boardspeed Control Circuit Using Pwm Technique And Small Dc Motor Control Switches To Give Control Inputs ( Direction And Speed ) Closed Wooden / Ms Cabinet , Rs 232 Serial Port Cable , Lcd Interface Boardlcd Display Of 2 Lines And 16 Characters / Line Closed Wooden Cabinet , Dual Trace Cro Signalbandwidth : 50 Mhz Real Time Sampling:Max 1 Gsa / S Equivalent Sampling Rate: Max 50 Gsa / S 7.0 Tft Lcd Color Display 2 Mpts Memory Depth . Independent Vertical Scale & Position Control Knobs For Each Channel. , Ask Modulator And Demodulatorkitcarrier Signal Generator - Sine 10Khz Data Generator - 4 Different Data Inputs Power Supply Inbuilt Patch Cards Closed Wood / Ms Box , Fskmodulator And Demodulatorkit Clock Generator - 100Khz Data Generator - 4 Different Data’S Fsk Modulation Using Ic 7400 Fsk Demodulation Included Power Supply Inbuilt Patch Cards Closed Wood / Ms Box , Sample And Hold Circuit Kit Carrier Signal Generator - Clock Pulse 1Khz To 10Khz Variable Sampling Signal - Sine 500Hz Mosfet Based & Ic Based Circuit Power Supply Inbuilt ( ±15V / 500Ma, ±5V / 500Ma ) Closed Wood / Ms Box Input Ac230v , Psk Modulator And Demodulatorkitcarrier Signal Generator - Sine 10Khz Data Generator - Using Decade Counter 7490 Power Supply Inbuilt ( ±5V / 500Ma ) Closed Wood / Ms Box Input Ac230v , Time Division Multiplexer Kit Digital Time Division Multiplexing And De-Multiplexing 8 Bit Data Generator Clock And Address Generator 8:1 Multiplexer 1:8 De-Multiplexer Power Supply Inbuilt ( ±12V / 500Ma, +5V / 500Ma ) Input Ac230v Patch Cards Closed Wood / Ms Box , Analog Transmitter And Receiver Kit Carrier Am Variable Frequency Modulating Signal Externally Input Power Supply Inbuilt Closed Wood Box Input Ac230v , Fiber Optic Analog Link Kit Fiber Optic Cable - 1 Meter - 1 No. Fiber Optic Cable - 3 Meter - 1 No. Signal Source Inbuilt Power Supply Inbuilt Closed Wood / Ms Box Input Ac230v , Fiber Optic Digitallink Kit Built In Clock Generator Fiber Optic Cable 1 Meter - 1No. Power Supply Inbuilt Closed Wood / Ms Box Input Ac230v , Measure The Bending Loss And Propagation Loss In Fiber Optics Transmitter : One Fiber Optics Led Having Peak Wave Length Of Emission 660 Nm Receiver : One Fiber Optic Photo Detector Ac Amplifier: 1 No. Analog Band Width:350 Khz Digital Band Width:2.5 Mhz , Manchester Encoder And Decoder Using Optical Communication Kitfiber Optic Cable - 1 Meter - 1 No. Fiber Optic Cable - 3 Meter - 1 No. Signal Source Inbuilt Power Supply Inbuilt , Voice Link Using Optical Fiber With Telephone Hand Set Transmitter :One Fiber Optics Led Having Peak Wave Length Of Emission 660 Nm Receiver :One Fiber Optic Photo Detector Ac Amplifier: 1 No. Filter :2 Nos.4Th Order Butterworth 3.4Khz Cut-Off Frequency Analog Bw: 350 Khz , Test The Horizontal And Vertical Deflection Sensitivity Of Crt ( Tv Crt Tube ) Monitor Size / Viewable Image Size: 17 Inch ( 432 ... ) Power Requirements: Input Voltage: 100 To 240 V ... Maximum Resolution: 1280 X 1024 Dot Pitch: 0.27 Mm , Dth System Kitpower Supply : 110V -260V Ac, 50Hz / 60Hz Rf Input : 950-2150 Mhz Dish Input : F-Connector Image Resolution : 352 X 288 Test Points : 17 Nos => Limited
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
Tamil Nadu View Result →
44.
Power #10479526 Price Bid
Overhauling Of C And I Equipments / Control Systems Pertaining To A.T.R.S., H.P., Bypass And Aux. P.R.D.S. System In Unit No-2, Of 3 X 210 Mw, A T.P.S. Anpara- 1 Job -I :Overhauling Of C&I Equipments / Control Systems Of Atrs 2 Dismantling, Cleaning, Servicing, Checking, Recalibration And Re Commissioning Of Recorders Including Redressing And Tightening Of Cables Connections. 3 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Pressure Transmitters. 4 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Position Transmitters. 5 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Relative Shaft Vibration Pickup. 6 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Bearing Shell Vibration Pickup. 7 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Pick For Axial Shift Along With Their Electronic Module. 8 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Pick For Differential Expansion Along With Their Electronic Modules. 9 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Pick For Over All Expansion Along With Their Electronic Modules. 10 Dismantling, Cleaning, Servicing, Checking, Testing, Reinstallation, Re Calibration And Re Commissioning Of Jacquet Probes ( Speed Sensors ) Including Their Electronic Computation Modules. 11 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Local Indicators For Differential Expansion. 12 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Pressure Switches. 13 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Pressure Gauges. 14 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Level Switches Of M.O.T. Along With Their Amplifiers. 15 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Local Indicators For Shaft Seal, Speed And Position Of Hpsvs / Ipsvs. 16 Disconnection From Site, Cleaning, Testing Checking, Repairing & Re Commissioning Of Thermocouples / R.T.D.S Along With Their Compensating Cables. 17 Disconnection Of Control And Power Cables Of Valve’S Actuators, Dismantling, Cleaning, Checking, Servicing, Repairing, Testing & Re Commissioning Oftheir Open & Close Limit Switches / Torque Switches, Re Connection Of Control And Power Cables And Final Commissioning Of Their Remote Operation. 18 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of Starting Device, Speeder Gear & A.T.T. Motors Including Re Setting Of Their P.F.T.S And Re Commissioning Of Their Remote Operation. 19 Dismantling, Cleaning, Servicing, Checking, Testing, Recalibration And Re Setting Of Limit Switches According To Site Requirement. 20 Dismantling, Cleaning, Servicing, Checking, Testing & Solenoids, Re-Commissioning Of Solenoid Valves Including Their Remote Operation. 21 Removal From Site, Cleaning, Servicing, Checking, Testing Recalibration And Re Commissioning Of Lube Oil Temperature Controller & Warm Up Controller. 22 Removal From Site, Cleaning, Servicing, Checking, Testing, Recalibration And Re Commissioning Of T.S.E. Indicator. 23 Dismantling, Cleaning, Checking, Testing, Contact Cleaning, And Commissioning Of Annunciation & Coupling Relays. 24 Removal From Site, Cleaning, Checking, Testing, Recalibration & Re Commissioning Of Collin’S P.F.T.S & Auto Loops Along With Re-Settingofstabilizing Voltage Ofturbine Electro Hydraulic Controller 25 Removal From Site, Cleaning, Repairing / Servicing, Checking Ofitsinternalwiring, Allthepushbuttons, Indicatinglamps &Re Commissioningofconsole Desks. 26 Removal From Consoles, Cleaning, Checking, Servicing, Testing, Recalibration And Re Commissioning Of Console Indicators. 27 Checking, Testing & Re Calibration Of Load Transducers By Signal Simulation. 28 Cleaning Of Electronic Cards / Modules Of A.T.R.S. Cabinets, Wire Tightening & Checking Of Main Power Supply And At Electronic Cabinet Interfacing Of Each Individual Rack And Rectification Of Faults, If Any. 29 Cleaning Of Junction Boxes, Wire Tightening / Redressing, T.B. Replacement Wherever It Is Damaged Along With Testing And Servicing Of Their Thermo States. 30 Removal From Site, Cleaning, Checking, Testing, Recalibration & Re Commissioning Of Collin’S P.F.T.S & Auto Loops Along With Their Electronic Modules Of Electro Hydraulic Controller Of L.P. Bypass. 31 Removal From Site, Cleaning, Checking, Testing, Recalibration & Re Commissioning Of Position Feedback Transmitters & Auto Loop Along With Their Electronic Modules Of Turbine Gland Seal & Leak-Off Steam Valves. 32 Removal From Site, Cleaning, Checking, Testing, Recalibration & Re Commissioning Of Collin’S P.F.T.S Along With Their Control / Operation Loops Of Speeder Gear & Starting Device. 33 Repairing Of Cable Trench, Made Of G.I. Sheets, Pertaining To A.T.R.S Including Redressing Of Cables 34 Replacement Of Thermocouples Of Intermediate Pressure Turbine ( I.P.T. ) Inner Casing 35 Removal From Site, Cleaning, Checking, Testing, Re-Calibration & Re Commissioning Of Mot Level Sensor With Amplifier Ofmain Oil Tank. 36 Job-Ii : Overhauling Of C&I Equipments / Control Systems Of Hp Bypass & Aux. Prds 37 Dismantling, Cleaning, Checking, Servicing, Testing, Recalibration And Re Commissioning Of All The Individual Field Equipments Such As Pressure Transmitters, Pfts, Air Filter Regulators, Junction Boxes, E. P. Converters Etc. Related To Auxiliary Steam Pressure Control System, Checking And Resetting Of All The Pre Set Values Of Gains / Amplification Factors Etc. In Its Electronic Cards / Modules As Per Commissioning Protocol, Final Testing And Commissioning Of All The Control Loops Related To Aux. Steam Pressure Controlvalves - 1, 2 & 3. 38 Dismantling, Cleaning, Checking, Servicing, Testing, Recalibration And Re-Commissioning Of All The Individual Field Equipments Such As Temperature Transmitters, Temperature Sensors, P.F.T.S, Air Filter Regulators, Junction Boxes, E. P. Converters Etc. Related To Aux. Steam Temperature Control System, Checking And Resetting Of All The Pre Set Values Of Gains / Amplification Factors Etc. In Its Electronic Cards / Modules As Per Commissioning Protocol, Final Testing And Commissioning Of All The Control Loops Pertaining To This System. 39 Dismantling, Cleaning, Checking, Servicing, Testing, Recalibration And Re Commissioning Of All The Individual Field Equipments Such As Temperature / Pressure Transmitters, Temperature Sensors, P.F.T.S, Air Filter Regulators, Junction Boxes, E. P. Converters Etc. Related To Spray Water Control System, Checking And Resetting Of All The Pre Set Values Of Gains / Amplification Factors Etc. In Its Electronic Cards / Modules As Per Commissioning Protocol, Final Testing And Commissioning Of All The Control Loops Pertaining To This System. 40 Dismantling, Cleaning, Checking, Servicing, Testing, Recalibration And Re Commissioning Of All The Individual Field Equipments Such As Pressuretransmitters, P.F.T.S, Air Filter Regulators, Junction Boxes, Blocking Units, Servo Valves Etc. Related To Main Steam Pressure Control System , Checking And Resetting Of All The Pre Set Values Of Gains / Amplification Factors Etc. In The Electronic Cards / Modules As Per Commissioning Protocol, Final Testing And Commissioning Of All The Control Loops Pertaining To This System. 41 Dismantling, Cleaning, Checking, Servicing, Testing, Recalibration And Re Commissioning Of All The Individual Field Equipments Such As Temperaturetransmitters, Junction Boxes Etc. Related To Main Steam Temperature Control System, Checking And Resetting Of All The Pre Set Values Of Gains / Amplification Factors Etc. In The Electronic Cards / Modules As Per Commissioning Protocol, Final Testing And Commissioning Of All The Control Loops Pertaining To This System. 42 Dismantling, Cleaning, Checking, Servicing, Testing, Recalibration And Re Commissioning Of All The Individual Field Equipments Such As Pressure Transmitters, P.F.T.S, , Blocking Units, Servo Valves, Junction Boxes Etc. Related To Spray Water Pressure Control System , Checking And Resetting Of All The Pre Set Values Of Gains / Amplification Factors Etc. In The Electronic Cards / Modules As Per Commissioning Protocol, Final Testing And Commissioning Of All The Control Loops Pertaining To This System. 43 Cleaning Of Electronic Cards / Modules Of H. P. By Pass & Aux. Prds Control Cabinets, Their Wire Tightening & Redressing Andchecking Of Main Power Supply And At Electronic Cabinet Interfacing Of Each Individual Rack And Rectification Of Faults, If Any.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Uttar Pradesh View Result →
45.
Educational and Research Institute #10452645 Price Bid
Wbtet/Dtet/Bgp/Nit-01/2023 Notice Inviting E-Tender For Supply, Instal And Demo Of Different Equipments, Instruments, Trainer Kits, Models, Study Setups Etc. For Diff Lab Of Ee Dept, Ites Lab Of Cfs Dept, Physics Lab And Engg Mech Lab Of Behala Government Polytechnic, Kol , Setup To Determine M.A., V.R., Efficiency And Law Of Machine Using Single Purchase Crab Winch , Setup To Determine M.A., V.R., Efficiency And Law Of Machine Using Double Purchase Crab Winch , Worm And Wheel Apparatus , Wheel And Differential Axle Unit , Simple Screw Jack Unit. , Setup To Determine Coefficient Of Friction , Universal Force Table. , Digital Spring Balance , Analytical Weight Box , Slotted Weights With Hanger, For Laboratory , Convex Mirror , Concave Mirror , Plane Glass Slab , Moment Of Inertia Of A Flywheel. , Co-Efficient Of Linear Expansion Of A Metal Rod. , Time Period Of Oscillation Of A Cantilever , Kirchoffs Law Trainer Kit With Ammeter And Voltmeter , Resistance Of A Galvanometer By Half Deflection Method , Convert A Galvanometer Into An Ammeter / Voltmeter , Inverse Square Law Of Radiations Using A Photo-Electric Cell , Trainer Kit To Study The Dependence Of Capacitance Of A Parallel Plate Capacitor , Quad 2-Input And Gate Cd4080 , Quad 2-Input Nand Gate Cd4010 , Quad 2-Input Or Gate Cd4070 , Quad 2-Input Nor Gate Cd4000 , Quad 2-Input Xor Gate Cd4069 , Quad 2-Input Xnor Gate Cd4076 , Triple 3-Input And Gate Cd4072 , Triple 3-Input Nand Gate Cd4022 , Triple 3-Input Or Gate Cd4074 , Triple 3-Input Nor Gate Cd4024 , Dual 4-Input And Gate Cd4081 , Dual 4-Input Nand Gate Cd4011 , Dual 4-Input Or Gate Cd4071 , Dual 4-Input Nor Gate Cd4001 , Single 8-Input And Gate Cd4068 (2 Outputs Per Gate) , Single 8-Input Nand Gate Cd4068 (2 Outputs Per Gate) , Single 8-Input Or Gate Cd4078 (2 Outputs Per Gate) , Single 8-Input Nor Gate Cd4078 (2 Outputs Per Gate) , 4068 Hex Not (Inverting Buffer) , 4040 Quad Buffer/Inverter (Each Input Has 2 Outputs Q And Q) , 4049Hex Buffer , 4059 14-Bit (÷16,384) Ripple Counter With Internal Oscillator , Adc0809 8-Bit ?P Compatible A/D Converters With 8-Channel Multiplexer (Dip Package) , Dac0800 Ic - 8-Bit Digital To Analog D/A Converter Ic Dip , 4509 Up/Down Decade (0-9) Counter With Preset , 4515 Up/Down 4-Bit (0-15) Counter With Preset , 4016 Decade Counter (1-Of-10) , 4027 Bcd To Decimal (1 Of 10) Decoder , 4012 - Dual D-Type Flip-Flop With Set And Clear. , 4554 - Dual 1-To-4 Line Decoder/Demultiplexer , 40147-10-Line To 4-Line (Bcd) Priority Encoder , Quad 2-Input And Gate [74X08] Dip , Quad 2-Input Nand Gate [74X00] Dip , Quad 2-Input Or Gate [74X32] Dip , Quad 2-Input Nor Gate [74X02] Dip , Quad 2-Input Xor Gate [74X86] Dip , Quad 2-Input Xnor Gate [74X7266] Dip , Triple 3-Input And Gate [74X11] Dip , Triple 3-Input Nand Gate [74X10] Dip , Triple 3-Input Or Gate [74X4075] Dip , Triple 3-Input Nor Gate [74X27] Dip , Dual 4-Input And Gate [74X21] Dip , Dual 4-Input Nand Gate [74X20] Dip , Dual 4-Input Or Gate [74X4072] Dip , Dual 4-Input Nor Gate [74X29] Dip , Single 8-Input Nand Gate [74X30] Dip , Hex 1-Input Buffer Gate [74X34] Dip , Hex 1-Input Inverter Gate [74X04] Dip , Mosfet Irf539 , Ujt-2N2645 , Diac-Db2 , Triac-Bt135 , Put-2N6026 , 3-To-8 Line Decoder/Demultiplexer, Inverting Outputs [74X138] Dip , 2-Bit Binary Full Adder [74X82] Dip , 4-Bit Binary Full Adder [74X83] Dip , (Bcd-To-Seven-Segment Decoders/Drivers) [74X47] Dip , (Bcd-To-Seven-Segment Decoders/Drivers) [74X46] Dip , Flip Flop [74X74] Dip , And-Gated R-S Master-Slave Flip-Flops With Preset And Clear [74X71] Dip , Dual Negative-Edge-Triggered Master-Slave Complementary Outputs [74X73] Dip , Quad S-R Latches[74279A] Dip , Voltage Regulator Ic: [Lm7805] Dip , Voltage Regulator Ic: [Lm7905] Dip , Voltage Regulator Ic: [Lm7809] Dip , Voltage Regulator Ic: [Lm7909] Dip , Voltage Regulator Ic: [Lm7812] Dip , Voltage Regulator Ic: [Lm7912] Dip , Voltage Regulator Ic: [Lm7815] Dip , Voltage Regulator Ic: [Lm7915] Dip , Single Timer Ic[Lm555] Dip , Voltage Regulator[Lm723c ] Dip , Moving Iron Type A. C. Ammeter: 0-0.2/1A (Dual Range); Accuracy Class± 0.5% , Moving Iron Type A. C. Ammeter: 0-0.5/2.5A (Dual Range); Accuracy Class± 0.5% , Moving Iron Type A. C. Ammeter: 0-2/10A (Dual Range); Accuracy Class± 0.5% , Moving Iron Type A. C. Ammeter: 0-10/20A (Dual Range); Accuracy Class± 0.5% , Moving Iron Type A. C. Ammeter: 0-15/30A (Dual Range); Accuracy Class± 0.5% , Moving Iron Type A. C. Voltmeter:0 -75 / 150 / 300 Volts (Triple Range); Accuracy Class± 0.5% , Moving Iron Type A. C. Voltmeter: 0- 150 / 300 / 600 Volts (Triple Range); Accuracy Class± 0.5% , Moving Coil D.C. Ammeter : 0 - 50/100 Ua (Micro-Ampere) (Dual Range); Accuracy Class± 0.5% , Moving Coil D.C. Ammeter : 0 - 0.5/1 Ma (Milli-Ampere) (Dual Range); Accuracy Class± 0.5% , Moving Coil D.C. Ammeter : 0 - 5/10 Ma (Milli-Ampere) (Dual Range); Accuracy Class± 0.5% , Moving Coil D.C. Ammeter : 0 - 10/20 Ma (Milli-Ampere) (Dual Range); Accuracy Class± 0.5% , Moving Coil D.C. Ammeter : 0 - 50/100 Ma (Milli-Ampere) (Dual Range); Accuracy Class± 0.5% , Moving Coil D.C. Ammeter : 0 - 500/1000 Ma (Milli-Ampere) (Dual Range); Accuracy Class± 0.5% , Moving Coil D.C. Ammeter :0 – 1 / 2 A (Dual Range) ; Accuracy Class± 0.5% , Moving Coil D.C. Ammeter : 0 – 5 / 10Amps. (Dual Range); Accuracy Class± 0.5% , Moving Coil D.C. Ammeter : 0 – 10 / 20Amps. (Dual Range); Accuracy Class± 0.5% , Moving Coil D.C. Voltmeter : 0 – 25 / 50 / 100 Mv (Triple Range); Accuracy Class± 0.5% , Moving Coil D.C. Voltmeter : 0 – 75 / 150 / 300 Mv (Triple Range); Accuracy Class± 0.5% , Moving Coil D.C. Voltmeter : 0 - 250 / 500 / 1000 Mv. (Tripplerange); Accuracy Class± 0.5% , Moving Coil D.C. Voltmeter : 0 - 15 / 30 / 75 V. (Tripple Range); Accuracy Class± 0.5% , Moving Coil D.C. Voltmeter : 0 – 75 /150 /300 Volts (Triple Range); Accuracy Class± 0.5% , Moving Coil D.C. Voltmeter : 0 – 150 /300 /600 Volts (Triple Range); Accuracy Class± 0.5% , Moving Coil D.C. Voltmeter : 0 – 500 /1000Volts (Dual Range); Accuracy Class± 0.5% , Dynamometer Type Single Ph Wattmeters [ Portable ]: 1 / 2 Amps (Dual Range), 150 / 300 / 600 Volts (Triple Range), Pf: Unity,Accuracy0.5 % , Dynamometer Type Single Ph Wattmeters [ Portable ]: 2.5 / 5 Amps (Dual Range), 150 / 300 / 600 Volts (Triple Range), Pf: Unity,Accuracy0.5 % , Dynamometer Type Single Ph Wattmeters [ Portable ]: 5 / 10 Amps (Dual Range), 150 / 300 / 600 Volts (Triple Range), Pf: Unity,Accuracy0.5 % , Wattmeter With Low Power Factor Cosø=0.2 [Portable]: 0.5 & 1Amps (Dual Range), 300 / 600Volts (Dual Range); Accuracy1.5 % , Wattmeter With Low Power Factor Cosø=0.2 [Portable]: 1 / 2Amps (Dual Range), 300 / 600Volts (Dual Range); Accuracy1.5 % , Wattmeter With Low Power Factor Cosø=0.2 [Portable]: 2.5 / 5Amps (Dual Range), 300 / 600Volts (Dual Range); Accuracy1.5 % , Dynamometer Type Three Ph Wattmeters [ Portable ]: 1 / 2 Amps (Dual Range),300 / 600 Volts (Dual Range), Pf: Unity,Accuracy1.5 % , Dynamometer Type Three Ph Wattmeters [ Portable ]: 5 / 10 Amps (Dual Range),300 / 600 Volts (Dual Range), Pf: Unity,Accuracy1.5 % , Dynamometer Type Single Phase Power Factor Meter: Current Coil Range : 1 & 2 Amps. ( Dual Range ), Pressure Coil Range:75, 150 & 300 Volts ( Triple Range ).Accuracy Within 2° , Single Phase Power Factor Meter: Current Coil Range : 2.5 & 5 Amps. ( Dual Range ), Pressure Coil Range:75, 150 & 300 Volts ( Triple Range ).Accuracy Within 2° , Three Phase Power Factor Meter: Current Coil Range : 2.5 & 5 Amps. ( Dual Range ), Pressure Coil Range:150/300 600 Volts ( Triple Range ).Accuracy Within 2° , Digital Multimeter (6000 Counts True-Rms), Backlit Lcd Display With Data Hold, Peak Hold, Auto Power Off Capable Of Measuringac/Dc Voltage, Ac/Dc Current, Resistance, Capacitance, Frequency, Temperature, Diode & Continuity Test, Transistor Test Etc. Standard Accessories: A Manual, Test Certificate, A Pair Of Test Leads, K-Type Thermocouple Etc. , Digital Multimeter (20000 Counts True-Rms, 4-1/2 Digits), Backlit Lcd Display With Data Hold, Peak Hold,Auto Range,Auto Power Off Capable Of Measuringac/Dc Voltage, Ac/Dc Current, Resistance, Capacitance, Frequency, Temperature, Diode & Continuity Test, Transistor Test Etc. Standard Accessories: A Manual, Test Certificate, A Pair Of Test Leads, K-Type Thermocouple Etc. , Microprocessor Based Fully Automatic L, C, R & Q Measurement Autocompute Lcr - Q Meter , Analog Oscilloscope: 30 Mhz, 2 - Channel,4 - Trace , 10Mhz Multi Waveform Signal/Function Generator: , Dds 20Mhz Multi Wave Form Signal Generator , Tachometer: Non-Contact Type Tachometer And Counter: , Tachometer: Contact-Type Digital Tachometer With Adaptors (60 To 49,999 Rpm) , Digital Lux Meter: , Clamp Meter : Digital Trms Ac/Dc : 3-5/6 Digit, 6000 Count, Backlight Lcd; T-Rms, Auto Ranging; Relative Measurement; Data Hold , Digital Earth Resistance Tester For 0 – 10 / 100 / 1000 Ohms, 4 Terminal With Testing Kit And Cables In A Hard Carrying Case , Digital Electronics Trainer Kit: , Electronics Trainer Kit (General Purpose): Self-Contained Capable To Perform Experiments Of Digital & Analog Electronics; , Network Theorem Trainer Board , Training Board To Determine The Power And Power Factor & To Draw Phasor Diagram In Series Rl, Rc & Rlc Circuit , Resistive Load Bank: 1 Phase / 10 A / 10 Steps / 230 V , Resistive Load Bank: 3 Phase / 10 A / 10 Steps / 415 V , Capacitive Load Bank: 1 Phase / 5 A / 230 V , Capacitive Load Bank: 3 Phase / 5 A / 230 V , Inductive Load Bank: 1 Phase / 10 A / 230 V / , Inductive Load Bank: 3 Phase / 10 A / 230 V / , Decade Capacitance Box: Range: 100 Pf To 10 Uf , Decade Resistance Box: Range: 10 Ohm To 1M Ohm , Decade Resistance Box: Range: 1 Ohm To 100K Ohm , Decade Inductance Box: Range: 100 Uh To 10 H , Regulated Dc Power Supply; Out Put : 230 V Dc - 30 A. , 3- Phase Electromagnetic Type Energy Meter , 3- Phase Digital Energy Meter , Single Phase Digital Energy Meter , Stop Watch Mechanical, , Digital Stop Watch , Kelvin Double Bridge For Low Resistance Measurement , Wheatstone Bridge For Measurement Of Medium Resistance , Digital Insulation Tester , Hand Driven Megger 1000V/500M Ohms , Earth Tester For Measurement Of Resistance Of Earth And Specific Soil Resistively , Trainer Kit For The Measurement Of Unknown Inductance Of A Coil By Anderson Bridge , Trainer Kit To Measure Unknown Capacitance Using Schering Bridge , Tri-Vector Meter 3Ph, 4Wire, 240 V, 10 - 40A , 3 Ph, 400 / 230 V, 3 Kva Transformer With All Terminals Brought Out For Different Connections. , Determination Of Equivalent Circuit Parameters Of A Single Phase Transformer By O.C And S.C Test. , Parallel Operation Of Two Single Phase Transformers , Transformer 1 Kva / 230/230V With Tappings , Setup To Study Open Circuit Test Of D.C. Shunt Generator , Setup To Study Speed Control & Load Test Of Dc Shunt Motor , D.C. Compound Motor (Open Type) , Setup To Study Swinburns Test Of Dc Motor , Setup To Study Load Test Of Dc Series Motor , Training Board To Study The Characteristics Of Semiconductor Devices , Training Board To Study The Electrical Characteristics Of Uni- Junction Transistor (Ujt) And To Construct Ujt Relaxation Oscillator , Analog To Digital Converter Training Board: Self Contained Logic Training Board To Study The Basic Principle On Conversion Of Analog Signal To Digital Signal. , Digital To Analog Converter Training Board: Self Contained Logic Training Board To Study The Basic Principle On Conversion Of Digital Signal To Analog Signal. , Logic Training Board For The Study Of Counters & Shift Registers , Power Electronics Lab Trainer , Training Board For The Study Of Switching Mode Power Supply (Smps) For Computer , Ups (Online) Demonstration Kit , Ups Trainer Kit 500Va Offline , Autotransformer Starter , 3 Phase Induction Motor (Semi Open Type) , Setup To Study No-Load Test, Blocked Rotor Test & Load Test Of Induction Motor To Determine Different Parameters Of The Motor. , Setup To Measure The Open Circuit Voltage Ratio Of The Three-Phase Slip Ring Induction Motor And Perform The Speed Control By Insertion Of Resistance In Rotor Circuit For Slip Ring Induction Motor. , Setup To Conduct The Direct Load Test To Determine The Efficiency And Speed Regulation For Different Loads Of A Single Phase Induction Motor; Plot The Efficiency And Speed Regulation Curves With Respect To The Output Power. , Rotor Resistance Starter - 5H.P. 3-Ph, 400V (For Slip Ring Motor) , D.O.L Starter - 3H.P. 400V, 3-Ph; , Star Delta Starter - 5H.P., 3-Ph, 400V, Manual; , Star Delta Starter - 5H.P., 3-Ph, 400V, Automatic; , Variac (Autu Transformer) - Single Phase Portable Table / Floor Mounting Nclosed Input 230V A.C., Output 270V A.C., 50-60Hz, 15 Amp, Air Cooled , Variac (Autu Transformer)- Three Phase 415V A.C., Output 470V A.C., 50-60Hz, 15Amp, Air Cooled , Setup To Perform The Direct Loading Test To Determine The Regulation And Efficiency, Oc And Sc Tests (Synchronous Impedance Method), To Plot The V Curves And Inverted V Curves Of Three Phase Alternator. , Setup To Plot Current – Voltage (I-V) Characteristics Of Poly Crystalline Silicon Solar Cell And Find Out The Solar Cell Parameters. , Setup To Measure Beam, Diffuse And Global Radiation On Horizontal And Tilted Surface Using Pyranometer And Plot Radiation Vs. Time Characteristics For Certain Duration. , Setup For Characterization Of A Solar Flat Plate Collector And Evaluate Its Parameters. , Setup For Characterization Of A Solar Concentrating Collector And Evaluate Its Parameters. , Setup To Measure Thermal Performance Of A Solar Cooker With Varying Reflector. , Solar Street Lighting System For Dc Supply. , Set Up A Small Wind Turbine (Swt) System And Identify Its Specified Components. , Study Of Different Parts Of Water Turbines Such As Pelton Wheel, Francics And Kaplan. , Set Up Of A Anaerobic Digestion Biogas Plant To , Set Up For Induction Type Over Voltage / Under Voltage Or Over Current/ Under Current Relay Ckt Using Suitable Hardware Ckt Controlled By 8085 Microprocessor To Plot The Characteristics , Jumper Wire: Single Stranded, Insulated Wire(Copper) 0.5Mm Dia , Jumper Wire Cutter: Self Adjusting Cable/Wire Cutter Stripper - Automatic Stripping Tool For Cables Up To 6 Mm , Twizzer , Magnifying Glass , 3-Phase Trms Multifunction Meter For 3Phase-3Wire/3Phase-4Wire Balanced Or Unbalanced Systems , Transmission Line Trainer Kit , D.C Network Analyzer , Hrc Fuse Link Cylindrical: Rated Current (A) :6A; Breaking Capacity (Ka) : 80Ka; Size : 14 X 51; Types : Hf; , Hrc Fuse Link Cylindrical: Rated Current (A) :10A; Breaking Capacity (Ka) : 80Ka; Size : 14 X 51; Types : Hf; , Hrc Fuse Link Cylindrical: Rated Current (A) :16A; Breaking Capacity (Ka) : 80Ka; Size : 14 X 51; Types : Hf; , Hrc Fuse Link Cylindrical: Rated Current (A) :20A; Breaking Capacity (Ka) : 80Ka; Size : 14 X 51; Types : Hf; , Current Transformer (Ct): Ring Type, Low Tension, Ratio: 50/5A, Burden: 5Va, Accuracy Class: 0.5, Tape Insulated , Current Transformer (Ct): Ring Type, Low Tension, Ratio: 100/5A, Burden: 5Va, Accuracy Class: 1.0, Tape Insulated , Current Transformer (Ct): Ring Type, Low Tension, Ratio: 100/5A, Burden: 5Va, Accuracy Class: 1.0, Resin Cast , Current Transformer (Ct): Rectangular Type, Low Tension, Ratio: 100/5A, Burden: 5Va, Accuracy Class: 1.0, Resin Cast , Hrc Fuse Link: 16A, 415V; Mounting Type: Bolted; Short Ckt Capacity: 8Ka , Hrc Fuse Link: 10A, 415V; Mounting Type: Bolted; Short Ckt Capacity: 8Ka , Miniature Circuit-Breaker (Mcb): 6A, Dp; Breaking Capacity:10Ka , Din Rail Mount , Miniature Circuit-Breaker (Mcb): 16A, Single Pole; Breaking Capacity:10Ka , Din Rail Mount , Miniature Circuit-Breaker (Mcb): 16A, Dp; Breaking Capacity:10Ka , Din Rail Mount , Miniature Circuit-Breaker (Mcb): 6A, Single Pole; Breaking Capacity:10Ka , Din Rail Mount , Mccbs: 240V Ac Dy 125U With Thermal Magnetic Release , Mccb: Four Pole, 100 Amp, 25Ka Breaking Capacity , Earth Leakage Circuit Breakers, 25A, 30Ma, 2 Pole, 230V Standard , Earth Leakage Circuit Breakers, 32A, 100Ma, 2 Pole, Standard , Rccb: 32A, Type-Ac, 100Ma , Rccb 4 Pole 16 Amp/30Ma 240 V Residual Current Circuit Breaker , Shunt: 50A, 75 Mv, Class 1.0% For Extension Of Range Of Ammeter , Static Over Current Relay Trainer Kit , Trainer Kit To Study The Speed Control And Reverse Operation Of A.C. Servo Motor , Trainer Kit To Study The Speed Control, Reverse Operation And Position Control Of D.C. Servo Motor: , Trainer Kit To Study Percentage Differential Protection Of Transformer, To Plot Characteristics Of % Biased Differential Relay, Pickup Test For Differential Relay, Transformer Protection For In Zone Trips Faults And Transformer Out Zone Or Non Trip Faults. , Setup To Perform Experiment For Distance Protection Of Transmission Line Lg, Ll, Llg, Lll, Lllg And Auto Reclose Function Of The Relay For Transient Type Faults. , Variable Voltage Variablefrequency Source , Arduino Uno , Arduino Nano , Arduino Mega , Raspberry Pi 3 Model B , Raspberry Pi 3 Model B Case , Micro Sd Card , Vga To Vga Cable , Raspberry Pi 3 Model B Power Supply , Hdmi To Vga Cable , Solderless Breadboard With 840 Points , Solderless Breadboard 400 Tie Points Half Size , High Quality Double Sided Fr2 / Phenolic General Purpose Pcb.Size : 140Mm X 90Mm (14 Cm X 9 Cm) Copper Layer To Belaminated / Lacquered For Easy Soldering And To Prevent Corrosion. , High Quality Double Sided Fr2 / Phenolic General Purpose Pcb.Size : 80Mm X 55Mm (8 Cm X 5.5 Cm) Copper Layer To Belaminated / Lacquered For Easy Soldering And To Prevent Corrosion. , Female Berg Strip, 2.54Mm Pitch, 40 Pin Single Row, Breakable Pin , Male Berg Strip, 2.54Mm Pitch, 40 Pin Single Row, Breakable Pin , Dot Matrix Ldc Display With 16 Characters X 2 Lines Green/Blue , Dc12v 3W Submersible Water Pump , Max7219 8X8 Led Dot Matrix Display Module , Hc-05 Bluetooth Module , Led 4-Digit Display Module , Sim900 Gprs Transfer Board Micro Sim Gsm Core Ttl Port Module For Arduino , 5Mm/12Mm, Photosensitive Ldr Light Sensor Module , Neo6mv2 Gps Module With Flight Controller , 650Nm 6Mm 5V Dc 5Mw Mini Laser Dot Diode Module , Universal 16 Key Matrix Module Membrane Switch Keypad 4X4 , 4X4 Matrix 16-Key Keyboard / Keypad Telephone Style , 2-Axis Joystick Module With Push Button Function , 3.3 To 5V Active Buzzer Alarm Module Sensor , L293d Motor Driver Module , Isd1820 Voice Recording Module With On Board Mic And Speaker , Isd1760 Voice Recording And Playback Module With On Board Mic And Speaker , Dc Plastic Gear Motor With Wheel: 12V, 150 Rpm, Side Shaft Bo (Battery Operation) Motor , Esp8266 Ch340 Nodemcu Wi-Fi Module , Wemos Esp8266 D1 R2 V2.1.0 Wifi Development Board , Coin Vibration Motor; Operating Voltage: 1.5-3 V , Atmega16: 8 Bit Microcontroller Individual Ic (Dip); Voltage Range: 2.7V To 5.5V;Operational Range: -40°C To +80°C , Mpr121 Breakout V12 Capacitive Touch Sensor Controller Module I2c Keyboard , Usb Cables A To B , Usb Cables Mini , Piezoelectric Sensor , Alligator Connectors , Hook-Up Wires , Hook-Up Wires , Rgb Leds , Leds (Red) , Leds (Green) , Leds (Blue) , Leds (Yellow) , Leds (White) , Timer Ic - Lm 555 , Ir Infrared Obstacle Avoidance Sensor Module For Arduino Smart Car Robot 3-Wire, Ir Module, Ir Sensor Module - Ml019 , Triple Axis Compass Magnetometer Sensor Module , Temperature And Humidity Sensor Module , Infrared Ir Sensor Receiver Module For Arduino , Arduino Ultrasonic Sensor , Tripple Axis Accelerometer Board , Pir Motion Sensor Detector Module Hc-Sr501 , Pulsesensor Heart Rate Beat Pulse Sensor Module Amplifier For Arduino Raspberry Pi Open Source With Cable Electronic Diy Tool , 2 Channel Dc 5V Relay Module,Optocoupler Low Level Trigger Expansion Board For Arduino Uno R3 Mega 2560 1280 Dsp Arm Pic Avr Stm32 Raspberry Pi , Sound Sensor Big Microphone Sensor High Sensitivity Sound Detection Module , Super Debug Soil Moisture Sensor Module Soil Hydrometer Humidity Detector For Arduino , Super Debug Ttp223 Based Capacitive Touch Sensor Module For Arduino , Metal Touch Sensor Module For Arduino , Rain Sensitive Sensor Module, Rain Drop Detection Sensor Module/Raindrops Humidity Sensor For Arduino , Flex Sensor 2.2? Bend Sensor For Hand Gesture Recognition , Dht11 - Temprature And Humidity Sensor Module , Lm35d Analog Temperature Sensor Module , Colour Recognition Sensor , Water Flow Sensor , Sound Detection Sensor Module , Analog Sound Sensor Microphone Module For Arduino , Power Bank , Rfid 13.56Mhz Reader Writer Module , Rf Transmitter Receiver Module 315Mhz Wireless Link Kit For Arduino , Male To Male Jumper Wires (20Cm) , Male To Female Jumper Wires (20Cm) , Female To Female Jumper Wires (20Cm) , Ka7805 Linear Voltage Regulator , Push Button Switches , Toggle Switch , 2A Digital Mq-2 Smoke Detection Sensor , Mq-135 Air Quality Sensor Hazardous Gas Detection Module For Arduino
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
46.
Housing Urban and Rular Development #10427022 Price Bid
Construction Of Sump Well Pump Room And Sitc Of Rotary Lobe Pump Sets Along With Related Eandm Equipments At Rahim Khan Road Nizamuddin East New Delhi Under Ser-1 Civil And Electrical Work-SH-I Pump Set WorkSupplying, installation, testing and commissioning of Positive displacement Rotary Lobe Pump for draining/dewatering of storm water/sewer water compatiblefor VFD (variable frequency drive) having minimum discharge 500 m3 /hr at 68Hz and 170 m3/hr at 25 Hz for 10 mtr. head and 5 mtr. suction Lift capacity complete withGeared Motorwith minimum power 45 kW/60 HP, 4 Pole suitable for operation on 415 Volt 50 Hzas per additional specification etc. as required. 2 Supplying, fabrication & installation of45KW VFD AUTO CONTROL PANEL made out of CRCA sheet steel of thickness 2mm for load bearing members, 1.6mm for non load bearing section with necessary stiffeners as required. 3 Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required: 4 250 m.m dia 5 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Gl bolts, nuts, washers etc.as required: 6 250 m.m dia 7 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 8 40 mm dia 9 80 mm dia 10 250 mm dia (wall thickness 6.3 mm) 11 450 mm dia (wall thickness 7.0 mm) 12 Fabrication, Supplying, Installation Testing & commissioning of automatic motorised Mechanical Coarse Bar Screen Suitable for channel dimension:i) Channel width: 1000mmii) Channel Depth: 3500 mmiii) Water Depth: 1500 mmiv) Bar Spacing: 20 mmv) Bar size : 12X6X50 mm vi) Angle: 75 Degreevii) MOC: SS304 Peak Flow/ Screen: 27MLDi/c Supplying, Installation, Testing & commissioning of 1No relay based control panel made out of 2mm thick CRCA sheet for 2Nos. Mechanical Coarse Bar Screen & 1No.Belt Conveyor etc. complete as required. - 13 Supplying, Installation, Testing & commissioning of Differential Level Sensorcomprises of Two Ultrasonic Level Sensors and One Differential Transmitter for Mechanical coarse bar screenetc. complete as required. 14 Supplying, Installation Testing & commissioning ofBelt Conveyor of size 600 mm width and2000mm Length i/c accessories for screen etc. complete as required. 15 Supplying, Installation Testing & commissioning of Gate Assy FG A101 Cast Iron Side Wall Embedded Oen Channel Gate (101) Size: 1000(W) X 1000 (H) mm Suitable for 1.75 m Seating water head (From invert Level) , Flush Bottom Closure Arrangement , Manually operated, Close Top Frame Gate etc. complete as required. 16 Supplying, Installation Testing & commissioning of Ultrasonic Level Transmitter with 4 ANSI PP Flange etc. complete as required. 17 Supplying, Installation Testing & commissioning of Local Control Stations for Pump Motors having following accessories i/c making connections etc. complete as required:a)DP MCB, 10kA, C-Curve for Control, 6A;: 1 No.b)Ampere meter, SIF-96, CI-1, Aux Supply 230V AC; 4-20mA I/P;1 No.c)Indicating Light-RED for ON;1 No.d)Indicating Light-AMBER for TRIP;1 No.e)Push Button with 1 NO contact - GREEN for VFD START;1 No.f)Push Button with 1 NC contact - RED for VFD STOP;1 No.g)Push Button with 1 NC contact - Mushroom head RED;1 No.h)Thermistor Relay 252 PMTG;1 No.i)Control Terminals, 2.5 sqmm; 6A;22 Nos. 18 SH-II Diesel Generator SetSupply, installation, testing and commissioning of Silent Type, CPCB IV + emission compliants Diesel Generating set having Prime Power Rating of 200 KVA, at 1500 RPM, 0.8 lagging power factor at 415V suitable for 50 Hz, 3 Phase system & for 0.85 Load Factor with all necessary equipments and accessories and consisting of followings :(a)Diesel EngineDiesel engine 4 stroke water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 degree C, 50 % RH & at 1000 meterMSL and conforming to BS 5514, BS 649, IS 10000(amended upto date), capable of taking 10 % overloading for 1 hourafter12hourofcontinuousoperation.Theenginewillbefittedcompletewithall accessories as per specifications .(b)Enginemountedinstrumentpanelfittedwithandhavingdigitaldisplayforthe following :-(i) Start stop switch with Key (ii) Water temperature indication (iii) lubrication oiltemperatureindication(iv)lubricationoilpressureindication(v) Batterycharging indication (vi) RPM indication (vii) Over speed indication (viii)Low lube oil trip indication(ix) Engine hour indication. 19 (c)AlternatorSynchronous alternator rated at 200 KVA, 415V, at 1500 RPM, 3 Phase, 50Hz, AC Supply with 0.8 lagging power factor at 40 Degree C, 50% Relative Humidity & at 1000m above MSL. The alternator shallbehavingSPDPenclosure,brushless,continuousduty,self-excitedandself-regulatedthrough AVR, confirming to IS: 4722 /BS : 2613suitable for tropical conditions and withF/H insulation.(d) Base Frame &foundation: Both the Engine & alternator shall be mounted on suitable baseframemadeofMSchannelwithnecessaryreinforcementwhichshallbeinstalledon suitablecementconcretefoundationandvibrationisolationarrangementasper recommendations of manufacturer.(e) Fuel Tank : Daily service fuel tank ofminimum 385 Ltr capacity fabricated out of 3mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank & diesel engine with MS class C Pipe of suitable dia complete with valves, level indicators, and accessories as required as per specification.(f) Exhaust System : Dry exhaust manifold withsuitable exhaust residential gradesilencer . 20 (g) Starting system : 24V DC starting system comprising of starter motors, voltage regulator and arrangementforinitialexcitation,completewith suitableno. of batteries(25Plates,180 AmpsHour Capacitylead acid type) as required as per specification.(h) Acoustic Enclosure : Acoustic and weather proof enclosure with arrangement for fresh airintakeforcoolingoftheengineandalternator,extractiondischargeofhotairinto atmosphere as per specifications. 21 AMF Panel(i) Fabricating,Installation, Testing & Commissioningofautomaticmainsfailurecontrolincludingautobypasspanel,suitable for 200 KVAsilenttypeDGsetcompletewithrelays,timers,setofCTs,formeteringand protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH& Provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to Diesel Engine and elsewhere, if required, all complete and interlocking including the following :-(a) 3 nos. 400 A 36KA, 4 Pole with thermo-magnetic release double break MCCBwith O/L,S/C & E/Fprotection with Aux . And trip contact and shunt release.(b)Auto / manual /test/off selector switch.(c) 2 nos. over voltage relay, 2 nos. reverse power relay and 2 nos. under voltage relay.(d)1 no. Auto mains failure relay(e) 3 sets of current transformer15P 10 accuracy for protection andclass 1, 15VA class-Ifor metering and. AMF Relay.(f) Energy analyzer unit to indicate current, voltage, frequency power factor and KWH.(g) Indicating lamps for load on mains and load on set.(h) Fuse for instruments.(i) Battery charger, complete with all accessoriesand Ammeter,voltmeter etc. 22 (j) Supply failure& restoration timer(k) Main supply failure monitor(l) Control unit with three impulse automatic engine start/stop and failure to start lock out.(m) Impulse counter with locking and reset facility.(n) ON/OFF/Control circuit switch with indicator.(o)Aux. contactor 2NO+2NC(p) Audio/Video annunciation for :(i) High water temperature.(ii) Low lubricating oil pressure.(iii) Engine over speed(iv) Engine fails to start.(v) Full load/ Maximum load warning. 23 Main LT PanelSupplying, installation, testing & commissioning of LT panel of minimum front area 3.15 sq. mtr. and depth not less than 45 cm, made out ofCRCA Sheet Steel 2mm for section with necessary stiffeners as required. Free standing, self supported, floor mounting, single front, indoorinstallation, non draw out and compartmented. ISMC-100 fabricated channel frame with undrilled holes.Bottom with undrilled detachable 3mm gland plate as per order .Welding will be carried out with no external deposition of welded material in particular places and there will not be any gap between the welded materials.Siemens Grey RAL 7032CRCA Structures shall be pre-treated in seven tank chemical process, heated in baking oven.Minimum 60 micron of approved shade (RAL-7032).230V AC for Main LT Panel and Other Panels415+/- 5% , 50Hz+/-5%, 3 Phase 4 Wire 50KA – 1 Sec TPN Aluminum Electrolytic Grade ( E-91E) busbar shall be provided as per suitable sze, duly supported on SMC/DMC, busbar supports & insulated with color coded heat shrinkable sleeve. Power wiring will be through Vertical Bus -Bar and 1.1 KV grade PVC multistrand copper flexible cable . All control wiring will be done by 1.5 sq mm copper flexible PVC multi strand wire. CT wiring shall be carried out with 2.5 sq mm copper flexible PVC multistrand wire.1. All R,Y,B,N phases will be Red, Yellow , Blue & Black 2.All control wiring will be Grey colour. Earthing shall 24 be be with Green color wire.3.C.T. - Wiring through Red, Yellow, Blue, Black coloured wiring with shorting link type terminals.EPDM gasket provided at all joints, doors & covers to make panels dust & vermin proof (IP-52)Section-I(a) INCOMER :-1No. 4nos. 400 A 36KA, 4 Pole with thermo-magnetic release double break MCCBwith O/L,S/C & E/Fprotection with Aux . And trip contact and shunt release. Ics=100%Icu i/c extended rotary handle and spreaders and all required accessaries Digital 96 mm square flush pattern type Voltmeter (0-500 V) with selector switch & back up HRC fuses/MCBs … complete 1 set.Digital 96 mm square flush pattern type Ammeter (0-400 Amp)with selector switch and one set of 3 Nos. CTs of ratio 400/5A class 1 accuracy and 10 VA burden - 1 set.Indicating lamp On, OFF, TRIP /R/Y/B/Ready to close…complete 1set(b) 400 AOnload Change over SwitchIcs=100%Icu i/c extended rotary handle and spreaders and all required accessories- 1setIndicating lamp On, OFF, TRIP /R/Y/B/Ready to close complete 1set(c) OUT GOINGS:- 4Nos. 100A FP MCCB ( 25kA) with thermo-magnetic release i/cextended rotary handle & spreaders. Ics=100%Icu etc complete as reqd. 25 Digital 96 mm square flush pattern type Voltmeter (0-500 V) with selector switch etc complete 1 set.Digital 96 mm square flush pattern type Ammeter (0-400 Amp)with selector switch and one set of 3 Nos. CTs of ratio 400/5A class 1 accuracy and 10 VA burden - 1 set.Indicating lamp On, OFF, TRIP /R/Y/B/Ready to close…complete 1set3 Nos. 63A FP MCCB ( 25kA) with thermo-magnetic release i/cextended rotary handle & spreaders. Ics=100%Icu etcwith indicating Lamps complete as reqd. 26 SH-III EI Work Supplying & Laying of one number PVC sheathed XLPE insulated power cable of 1.1 KV grade of following size on cable tray as required. 27 3.5 x 240 Sq.mm XLPE Al Conductor Armoured Cable (clamped with 40x3mm MS flat clamp) 28 3 X 50 sq mm (clamped with 25x3mm MS flat clamp) 29 Supplying, Laying and fixing of XLPE insulated and PVC sheathed aluminium conductor armoured Power Cableof 1.1 KV grade of following sizes on wall surface etc. as required. 30 4X25 Sq. mm. (clamped with 1mm thick saddle) 31 Supplying & Laying and fixing of one number PVC sheathed XLPE insulated power cable of 1.1 KV grade of following sizedirect in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 32 3.5 x 240 Sq.mm XLPE Al Conductor Armoured Cable 33 Supplying and Laying of XLPE insulated and PVC sheathed Copper conductor armoured Power Cable of 1.1 KV grade of following size on cable tray as required. 34 4x4 Sq.mm. 35 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 36 3½ X 240 sq. mm (62mm) 37 3 X 50 sq. mm (32mm) 38 4 X 25 sq. mm (28mm) 39 Supplying and drawing following size of PVC insulated copper conductor multicore cable of following size on cable tray as required. 40 10 core 1.5 sq.mm 41 24 core 0.5 sq.mm 42 4 core 0.5 sq.mm 43 2 core 1.5 sq.mm 44 6 core 0.5 sq.mm 45 3 core 0.75 sq.mm 46 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 47 100 mm width X 50 mm depth X 1.6 mm thickness 48 450 mm width X 50 mm depth X 2.0 mm thickness 49 EarthingEarthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 50 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 51 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode includingconnectionwithbrassnut,bolt,spring,washerexcavationandre-fillingetc.as required. 52 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 53 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode includingconnectionwithG.I.nut,bolt,spring,washerexcavationandre-fillingetc.as required. 54 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. asrequired. 55 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 56 Group C 57 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 58 3 x 4 sq. mm 59 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 60 25 mm 61 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 62 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 63 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 64 4 way (4 + 12), Double door 65 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 66 Single pole 67 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 68 63 amps 69 Supplying, Installation, testing & commissioning of weather proof LED Corrosion resistant battentype LED fitting of following wattagewith IP65 body made out of polycarbonate housing & opal diffuser with better thermal managementCCT-5700°KLumen Efficacy ≥110 Lm/W Power Factor≥ 0.95, CRI≥70, with constant current driver etc. complete as reqd. 70 36 Watt (4 feet ) 71 SITC of 450 mm heavy duty Exhaust Fan 1400 RPMsingle phase 240 Volt 50 Hz in the existing opening, complete with heavy duty louver/ shutter i/c making the hole to suit the size of the above fan, making good the damages, connection, testing, commissioning & earthing etc. as required 72 SITC of 600mmwall mounted fan having 3 nos. of blades, 1440RPM etc complete as reqd. 73 SH-IV AMCAMC for pump sets, Motor control panel and other accessories starting after satisfactory completion defect liability period from date of completion and commissioning of the pumping system.Annual Comprehensive maintenance for all 3 Nos. Pump sets, Motor, VFD Auto control panel, Mechanical Course Bar Screen, Differential Level sensor, Ultra Sonic Level Transmeter, Belt conveyor, Gate assembly including all accessories and consumables etc. all complete and as per site requirement as per Engineer-in-charge. 74 For 1st Year (Free Maintenance period) 75 For 2nd Year 76 For 3rd Year 77 Comprehensive maintenance of 200 KVA Silent type DG Set with AMF Panel. Annual Comprehensive maintenance of 200 KVA DG set and its accessories with AMF Panel i/c repairing, servicing, cleaning, checking and Descaling with replacment of following consumable parts i.e oil filter, fuel filter, air filters, coolant, lube oil, coolant filter, battery water, V Belts and batteries etc. complete and as per site requirement as per Engineer-in-charge. 78 For 1st Year (Free Maintenance period) 79 For 2nd Year 80 For 3rd Year 81 Civil WorkDemolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 82 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 83 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. 84 All kind of soil. 85 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 86 Providing and laying in position ready mixed or site batched design mix cement concrete for plai plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads: but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 87 Concrete of M10 grade with minimum cement content of 220 kg /cum 88 Centering and shuttering including strutting, propping etc. and removal of form for all heights : 89 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 90 Suspended floors, roofs, landings, balconies and access platform 91 Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick 92 Edges of slabs and breaks in floors and wallsAbove 20 cm wide 93 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work;usingcoarse aggregate and fine aggregate derived from natural sources,Portland Pozzolana / Ordinary Portland /Portland Slagcement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability andworkabilitywithout impairing strength; including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge;for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately.In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level Concrete of M25 grade withminimum cement content of 330 kg /cum 94 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 95 Thermo-Mechanically Treated bars of grade Fe-500D or more. 96 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 97 Cement mortar 1:4 (1 cement : 4 coarse sand) 98 12mm cement plaster of mix 1:4 (1cement:4 fine sand). 99 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) 100 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 101 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 102 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre 103 Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :Ordinary roack 104 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 105 Providing and fixing soil, waste and vent pipes : 100 mm dia. : 106 Sand cast iron S&S pipe as per IS: 1729. 107 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 108 Circular shape 450 mm dia 109 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 110 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 111 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 112 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 113 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm : 114 Sand cast iron S&S as per IS - 1729 115 Providing and fixing plain bend of required degree : 100 mm 116 Sand cast iron S&S as per IS - 1729 117 Providing and fixing single equal plain junction of required degree: 100x100x100mm, 118 Sand cast iron S&S as per IS-1729. 119 Providing and fixing terminal guard: 100mm : 120 Sand cast iron S&S as per IS:1729. 121 Providing and fixing collar:100mm : 122 Sand cast iron S&S as per IS:1729. 123 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 124 100mm : 125 Providing and fixing trap of self cleanising design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100mm inlet and 100mm outlet : 126 Sand cast iron S&S as per IS:3989. 127 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. 128 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : Externalwork : 129 25mm dia nominal bore. 130 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tees including cutting andthreading the pipe etc. complete : 131 25 to 40mm nominal bore. 132 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc : Externalwork : 133 32mm dia nominal bore. 134 Providing and fixing C.P. brass bib cock of approved quality confirming to IS :8931 : 135 15mm nominal bore. 136 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make confirming to IS:8931 : 137 15mm nominal bore. 138 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 139 25mm nominal bore. 140 Providing and fixing ball valve (brass) of approved quality, High or low pressure with plastic floats : 141 25mm nominal bore. 142 Providing and fixing brass ferrule C.I. mouth cover including boring and taping the main : 143 25mm nominal bore. 144 Providing and fixing unplasticised PVC connection pipe with brass unions : 45cm length : 145 15mm nominal bore. 146 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 147 Providing and fixing PTMT grating of approved quality and colour : Circular type : 148 100mm nominal dia. 149 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer : E.R.W. tubes. 150 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)jointing with grey cement slurry @3.3 kg/sqm including grouting thejoints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only .Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 151 Size of tile600x600mm. 152 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes.Single socketed pipes : 153 110mm diameter. 154 Providing and fixing on wall face unplasticised –PVC moulded fittings / accessories for unplsticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion : Bend 87. 5° : 155 110mm bend. 156 Providing and fixing on wall face unplasticised –PVC moulded fittings / accessories for unplsticised rigid PVC rain water pipes confirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion : Shoe (Plain) : 157 110mm Shoe. 158 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 159 Two or more coats on new work. 160 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required : 161 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 162 Providing and laying in position ready mixedor site batched design mix cement concrete for plain cement concrete work;usingcoarse aggregateandfine aggregate derived from natural sources and usingrecycled concrete aggregate (RCA)as coarse aggregate and fine aggregate within thepermissible utilization,PortlandPozzolana / Ordinary Portland/Portland Slag cement,admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concreteto improvedurability andworkabilitywithout impairing strength;including pumping of concrete to site of laying, curing,carriage for all leads; but excluding the cost of centering, shuttering and finishingas per direction of the engineer-in-charge; for thefollowing grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works upto plinth level 163 Concrete of M25 grade with minimum cement content of 300 kg /cum.(Note: The permissible utilization of Recycled Concrete Aggregate (RCA) as coarse aggregate and fine aggregate is 25% each). 164 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design: 165 With 20x20 mm square bar 166 Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 : 167 450 mm dia Ductile Iron Class K-9 pipes. *For use of bigger dia. pipes other than 450mm, net difference in basic rate as per applicable DSR shall be reimbursed to the contractor. 168 Providing and laying integral cement based treatment for water proofing on horizontal surface at all depth below ground level for under ground structures as directed by Engineer-in-Charge and consisting of :(i) Ist layer of 22 mm to 25 mm thick approved and specified rough stone slab over a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) including applying of twice ( at base and top of mortar ) cement slurry @ 2.2kg/m2 (each time) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound. 169 (ii) 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions.(iii) Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.Using rough kota stone. 170 Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : 171 Using rough Kota stone 172 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 173 Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : 174 Red sand stone slab40 to 50 mm thick 175 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces 176 40 to 50 mm thick 177 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings, glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 178 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 179 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 180 Made of G.I. wire of dia 4 mm 181 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 182 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) 183 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 184 Modified estimated cost after using correction factor on DSR-2023 on account of GST @0.973 vide O.M. dated 08.08.2024.(i.e. 9720555 *0.973 = 9458100 185 Carrying out structural analysis and design of all civil work, Design of all E&M works, foundation and superstructure of work such as pump-room, UGT and Delivery line upto Barapullah Drainage etc. all complete and submission of input data, check print structural drawing, 6 Nos. prints with soft copy of analysis and drawings as per direction of Engineer-in-Charge by approved structural consultant agency. The profile of structural consultant shall be got approved from NIT approving authority. The structural design shall be comprehensive to enable easy servicing of pumps and other heavy equipment’s etc. possible. The Hydrological data shall be provided to the consultant for drainage design.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Delhi View Result →
47.
Rural Development #10408690 Price Bid
Supply Of Furniture For Wbsrda, Murshidabad Division , Purchaseing Of Furniturfor Wbsrda, Murshidabad Division. , Providing, Supplying And Placing Of Executive Engineer Table. Dimension Of The Table: 1800W X 2100D X 750H Mm. Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management. Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. The Product Should Have Iaq Gold, Greenpro, Griha 2019 And Greenguard (By Ul) Certification. , Providing, Supplying And Placing Of Executive Chair (Normal). The Product Should Have Iaq Gold, Greenpro, Griha 2019, Greenguard (By Ul) And Bifma Level-2 Certification. Seat/Back Assembly : The Cushioned Seat Should Be Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Be Upholstered With Leatherette And Moulded High Resilience (Hr) Polyurethane Foam Of Density 45±2 Kg/M3,And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression.The Cushioned Back Should Be Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. Seat Size : 47.0 Cm. (W) X 48.0 Cm. (D). High Back Size: 47.7 Cm. (W) X 76.4 Cm. Armrests: The Armrest Top Should Be Moulded From Polyurethane(Pu) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism : The Adjustable Tilting Mechanism Should Be Designed With The Following Features: 360 Revolving Type. Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. Tilt Tension Adjustment Can Be Operated In Seating Position. 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. Seat/Back Tilting Ratio Of 1: 2. The Mechanism Housing Should Be Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment : Seat Depth Adjustment Should Be Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Be Of 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Be Connected To The Up/Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly: The Pedestal Should Be High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 65.0 ± 0.5Cm. Pitch-Center Dia.(75.0 ± 1.0Cm. With Castors.) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair: Seat Height -43.1-53.1Cm Height -112.7-130.2Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. , Providing, Supplying And Placing Of 3-Seater Sofa Cum Bed. Overall Dimension In Sofa Condition:- Length : 200Cm, Width : 104.5Cm, Height : 97.5Cm, Seat Height : 46.5Cm. In Bed Condition:- Length : 200Cm, Width : 155Cm, Height : 77.5Cm, Seat Height :46.5Cm. This Sofa Cum Bed Has Contemporary Looks And Well-Engineered Functionality, It Gives Value For Money Considering The Spaces It Occupies. This Upholstered Sofa Transforms Into A Bed Easily And Has Ample Storage Space, A Perfect Solution For Everyday Use. The Main Feature It Has Is Premium Comfort Plus A Functional Sofa-Cum-Bed Without Compromising On The Aesthetics. The Oem Should Have Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 (All Iso Certificate Must Be From Nabcb/Iaf Recognized Accreditation Body), Igbc Platinum, Aiota Certification. , Providing, Supplying And Placing Of Working Table L-Shape Of Size Shall Be 1200 Width X 600 Depthx 750 Height.The Top Shall Be In White Cedar And Black And Shall Be 18 Mm Plb With Pvc Lipping.The Side Panels Shall Be 18 Mm Thickplt With Pvc .The Modesty Panel Shall Be 18 Mm Thick Plt. The Modesty Panel Shall Be In A Combination Of Black & White Cedar. Pedestal Size Shall Be390 Width X435 Depthx529 Height.The Top Is 18 Mm Thick Plb . The Two Drawer Mobile Pedestal Is Available In One Size .The Top And Drawer Fronts Shall Be In White Cedar While The Other Components Shall Be In Black. The Oem Should Have Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 (All Iso Certificate Must Be From Nabcb/Iaf Recognized Accreditation Body), Igbc Platinum, Aiota Certification. , Providing, Supplying And Placing Of Tea Table With Glass Top.It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure. Pisa Center Table: Understructure: It Is A Welded Assembly Made In Ss202 Grade. Dia. 12±0.04 As Per Is:1762. Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. The Oem Should Have Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 (All Iso Certificate Must Be From Nabcb/Iaf Recognized Accreditation Body), Igbc Platinum, Aiota Certification. , Providing, Supplying And Placing Of Visitors Chair (Stand). Seat/Back Assembly: The Seat Made From 1.2 ±0.1Cm. Thk. Hot Pressed Plywood Measured And Back Should Beinjection Moulded From Black Co-Polymer Polypropylene Upholstered With Fabric And Moulded Polyurethane Foam Together With Seat And Back Covers. The Back Foam Should Bedesigned With Contoured Lumbar Support For Extra Comfort. Seat Size: 45.0Cm(W) X 42.0Cm.(D). Back Size: 39.0Cm(W) X 38.0Cm.(H). Seat / Back Covers: The Seat And Back Covers Should Beinjection Moulded In Black Co-Polymer Polypropylene. High Resilience (Hr) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 +/-2 Kg/M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. Armrest Assembly : The Armrests Should Bemade Of Black Integral Skin Polyurethane Wtih 50-70 Shore A Hardness And Reinforced With M.S. Insert. The P.U. Armrests Should Bethen Fixed To Black Powder-Coated ( Oft 40-60 Microns ) Armrest Brackets Made Of Of 0.5 ± 0.05 Cm. Thk. Hr Steel And Fitted With Claddings Made Of Injection Moulded Polypropylene. Fixed Type Mechanism: The Fixed Type Mechanism Should Bewithout Back Tilt. Tubular Frame: The Tubular Frame Should Bemade Up Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. M.S. E.R.W. Tube And Black Powder Coated ( Dft 40-60 Microns). Overall Dimensions Of Chair: Seat Height -49.5Cm. Height -88.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-56.0 Cm And Depth-54.0 Cm. The Product Should Have Greenguard (By Ul) Certification. , Providing, Supplying And Placing Of Steel Almirah Which Shall Have An Overall Size Of916mm(W)X486mm(D)X1981mm(H) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm (High Yield Strength) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Storwel Plain Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns (+/- 10). Plenty Of Colour Options And Shelving Options Shall Be Available. The Product Should Have Iaq Gold, Greenpro, Griha, Greenguard (By Ul) Certification. , Supply, Fitting & Fixing Of Open Type Multiflex Rack As Per The Below-Mentioned Dimension. 1. Height – 2400 Mm 2. Width- 1200 Mm 3. Depth- 448 Mm 4. No Of Panels- 6 (Customised Item) The Oem Should Have Iso 9001:2015, Iso 50001:2018, Iso 45001:2018, Iso 14001:2015 (All Iso Certificate Must Be From Nabcb/Iaf Recognized Accreditation Body), Igbc Platinum, Aiota Certification. , Computer Table: Supplying And Placing In Position Office Table Of The Following Specifications. Its Size Shall Be1200 X 600 X 750.Table Material - The Table Panels Are Made From 18 ±0.5Mm Thk Pre-Laminatedexterior Grade Plt ( Grade I,Type-Ii )(Is 12823) With Pvc Edgebanding On All Sides............. Other Certificates Iso 9001:2015, Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 Is Mandatory. The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Over Cabinet With Metal Shutter: Supplying And Placing Of Overhead Storage Unit Product Size - The Overhead Storage Unit Consist Of 1No Main And4 Nos Add-On Unit Type Of Construction With ..............The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Over Cabinet With Metal Shutter:: Supplying And Placing Of Overhead Storage Unit Product Size - The Overhead Storage Unit Consist Of 1Nomain And5 Nos Add-On Unit Type Of Construction.............The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Over Cabinet With Metal Shutter Supplying And Placing Of Overhead Storage Unit Product Size - The Overhead Storage Unit Consist Of 1 No Main And5 Nos Add-On Unit Type Of Construction ............The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. : , Over Cabinet With Metal Shutter: Supplying And Placing Of Overhead Storage Unit Product Size - The Overhead Storage Unit Consist Of 1 No Main And20 Nos Add-On Unit Type Of Construction ........... The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Metal Shelving Racks:Supplying And Placing Of Storage Open Shelf Product Size - 5400(W) X 450(D) X 1950*(H) (Height Of Leveler Is 50Mm And Adjustment Possible Should Be ................The Iso Certificates Should Be Obtained From Nabcb (Central Govt) Accredited Organization Otherwise Certificates Will Not Be Accepted. Sample And Factory Visit Is Mandatory To Inspect As Per The Requisite. , Cable Cubby With Hdmi/Usb Port:Sitc Of Diagonal Size 85,Panel Type 60Hz New Edge, Resolution 3,840 X 2,160 (Landscape) ,Brightness 350 (Without Glass), 220 (With Glass), Contrast Ratio 4000:1 (Typ.), Viewing Angle(H/V) 178:178,Response Time 6 Ms, Display Colors 16.7, Color Gamut 92%, Dynamic C/R Mega,Audio Built In Speaker(10W X4), Input Type Hdmi 2(Rear 1, Front 1), Dp 1, Usb C(Front), Ops I/F, 2(For Soc, Rear/Front), 1 (For External 3.0X1(Front)), Output Type (Basic) Touch Out 1 (Usb Upstream Type),(With Tray) Touch Out 1, No. Of Drawing 20 Touch (Internal/External), * Whiteboarding App Works 4 Drawing, Drawing Speed(Touch Latency) 26Ms, Duty Cycle 16/7, Special Features Ag Flim(Anti Glare),Hydrophobic Coated Pet (Shatter-Proof Flim) Antimicrobial Coating, Touch Module(Ir), , Wifi/Bt Module Embedded, Built In Speaker(40W 4Ch),External Control Touch Input,Rs232c Thru Stereo Jack, Rj45(For Mdc). Safety Ce, Ul & Bis.Approved Make: NecSonySamsung , Mount For Display: Sitc Of Mount For Display. , 4X2 4K/60 Hdmi With 2 Audio Outputs:Sitc Of 4 X 2Hdmi Matrix Switcher With Audio De-Embedding, As Per Specifications..4 X 2Hdmi Matrix Switcher With Audio De-Embedding Which Supports Computer And Video Resolutions Up To 4K/60 @ 4:4:4 , ............... Parity, Defaults: 9600 Baud, 8 Data Bits, 1 Stop Bit, No Parity; Should Support Ethernet Protocol : Arp, Dhcp, Dns, Http, Https, Icmp (Ping), Ieee 802.1X, Ntp, Sftp, Smtp, Snmp, Ssh, Tcp/Ip, Telnet, Udp/Ip Approved Makes: Extron/ Dexon/ Fsr , Ptz Cameras:Sitc Of Full Hd Ptz Camera, Sensor 1/2.8 2.41Mp Cmos, Video Format Hdmi:1080P 60 / 50 Fps,720P 60 / 50 Fps,Usb:1080P 30 / 25 Fps, 720P 30 / 25 Fps, Video Output (Hd) Interface Hdmi / Usb 3.0, Optical Zoom 12X, Digital Zoom 12X (Hdmi Only), Viewing Angle 72°(H) 80°(D), Panning Angle +100° ~ -100°,Panning Speed 100°/ Sec,Tilting Angle +30° ~ -30°, Tilting Speed 100°/ Sec,Aperture F1.6~F2.8,Focal Length F = 3.92 ~ 47.32 Mm,Shutter Speed 1/1 ~ 1/10,000 Sec, Minimum Object,Distance 500Mm (Wide) ~ 1500Mm (Tele),Video S/N Ratio > 50Db,Minimum Illumination 1.6 Lux (F1.8, 50Ire, 60Fps), Focus System Auto / Manual, Gain Control Auto / Manual, White Balance Auto / One-Push / Manual, Exposure Control Auto / Manual, Wdr Yes, 3D Nr Yes, Image Flip Yes, Preset Positions 128, Control Interface Rs-232 In And Out / Usb, Control Protocol Visca / Uvc, Video Stream Yuv422 / Mjpeg, Ir Pass-Through Yes, Ir Receiver Yes, Ir Remote Control Yes, Power Consumption < 13W.Approved Make: Lumens/Sony/Panasonic. , Wall/Ceilingmount For Above Camera: Sitc Of Wall/Ceilingmount For Above Camera , Cable Cubby With Hdmi/Usb Port: Sitc Of Cable Cubby With Hdmi/Usb Port , Hdmi Transmitter:Sitc Of Hdmi Transmitter Transmitting Hdmi Plus Control And Analog Audio Up To 230 Feet (70 Meters) Over Twisted Pair; Supports Computer And Video Resolutions Up To 4K ; Supports Data Rates Up To 10.2 Gbps, Deep Color Up To 12-Bit, 3D, Hd Lossless Audio Formats, And Cec Pass-Through ; Hdcp 2.3 Compliant; Supports Up To 4:4:4 Chroma Sampling; Should Support Maximum Pixel Clock 300 Mhz; Should Support Audio Gain Unbalanced Output: 0 Db; Balanced Output +6 Db, Frequency Response 20 Hz To 20 Khz, ±0.5 Db , Thd + Noise 0.03% @ 20 Hz To 20 Khz At Maximum Output , S/N >90 Db, At Maximum Output (15 Dbu), Balanced (Unweighted) , Stereo Channel Separation >80 Db @ 1 Khz To 20 Khztput Displays.Approved Makes: Extron/ Dexon/ Fsr , Cable Cubby With Hdmi/Usb Port: Sitc Of Twisted Pair Receiver Which Receives Hdmi Plus Control And Analog Audio Up To 230 Feet (70 Meters) Over Twisted Pair; Support Computer And Video Resolutions Up To 4K, Data Rates Up To 10.2 Gbps Or Better And Cec Pass-Through; Hdcp 2.3 Compliant; Edid Management; Support Up To 4:4:4 Chroma Sampling; Should Support Maximum Pixel Clock Of At Least 300 Mhz; Should Support Audio Gain Of Unbalanced Output: 0 Db; Balanced Output +6 Db, Frequency Response Of 20 Hz To 20 Khz, ±0.5 Db, Thd + Noise Of 0.03% @ 20 Hz To 20 Khz At Maximum Output, S/N Of >90 Db, At Maximum Output (15 Dbu), Balanced, Stereo Channel Separation : >80 Db @ 1 Khz To 20 Khz.Approved Makes: Extron/ Dexon/ Fsr , Hdmi And Audio To Usb Scaling Bridge: Sitc Of Hdmi To Usb Converter.Approved Make: Inogeni/Extron/Fsr , Hdmi Cable 25 Ft: Sitc Of Hdmi Cable 25 Ft , Hdmi Patch Cable: Sitc Of Hdmi Patch Cable 6 Ft.Approved Make: Extron/Klotz/Nt , Usb Cable-10 Mtr: Sitc Of Usb Patch Cable 10 Meter.Approved Make: Extron/Klotz/Nt , Usb Cable: Sitc Of Usb Patch Cable 1.8 Meter.Approved Make: Extron/Klotz/Nt , Wired Gooseneck Microphone With Base: Sitc Of 18Goosenecklengthwithdualflexdesign,Shouldoperatewithinthefrequencyrangeof30hz-18Khz Or Better, Elementwithbackelectret-Condenser, Polar Pattern With Cardioid,Lowfrequencyroll-Of With 180Hz,12Db/ Octave,Impedancewith250?±30%(At1000hz),Opencircuitsensitivitywith-57Db±3Db (0Db=1V/Microbar 1000Hz Indicated By Open Circuit,Maximum Input Sound Level With 115Dbspl,1Khzat1%T.H.D.,Dynamic Range With82db1khzatmaxspl,Signal-To-Noise Ratio With 61Db 1Khz At 1Pa, Operating Voltage With Phantom Power11–52Vdc,2Matypical,Switchwithflat,Roll-Off 10Db Pad(Nominal). Should Be Supplied With Base Having On/Offswitch Etc. , Single Ch Wireless Microphone With Handhed Wireless Microphone: Sitc Of Wireless Handheld Microphone With Built In Afs(Automatic Frequency Selection) Technology, Uhf Operating Mode With Frequency Range Of 522 -930Mhz, Should Have Operating Bandwidth 134 Mhz Or Better, Anti Interference Technology Ensures Noiselock Squelch Effectively Blocks Stray Rf Or Better, Microphone Frequency Response Of 45Hz To 18Khz Or Better, Should Have Signal To Noise Ratio Less Then 104Db Or Better, Rf Output Power Of 10/40Mw Or Better, Should Have Maximum 24 Set Can Be Used Simultaneously By Using Multiple Frequency Bands In One Venue, Should Have Die Cast Metal Body, Microphone Element Dynamic Or Better Complete Etc. , Dsp Audio Processor With Acoustic Echo Cancellation, Afc, Agc,8Ch Gpio& Us: Sitc Of Digital Signal Processor With Min. 04Aec Enabled Mic/Line Inputs, 04 Line Outputs Or Better , Input Channel Processing Should Include Pre Amplifier, Signal Generator, Expander, Compressor, 10 Band Parametric Eq Or Better, Output Channel Processing Should Include 31 Band Graphic Equalizer, Delay, Crossover, Limiter Or Better, Other Features Should Include Automatic Mixing Console, Ducker, Feedback Elimination, Noise Elimination, Echo Elimination Or Better, Should Have Built-In Bi Directional Usb For Software Based Vc As Well As For Playing Digital Audio, Should Have Built In Camera Tracking Module, 8 Port Freely Configurable Gpio Or Better With Analog/Digital Dynamic Range Of 114Db Or Better, Sampling Rate Of 48Khz Or Better, Frequency Response Of 20Hz – 20Khz Or Better, Per Channel Phantom Power Module Or Better. Should Be Configurable Thru Software. , Amplifier: Sitc Of Amplifier Having 4X150w @4Ohm Power Or Better, It Should Be 4 Channel Class D Amplifier With Volume Knobs On Each Channel Or Better, W/Ch@8Ohm 90W Or Better, W/Ch@4Ohm 150W Or Better, W/Ch@2Ohm 230W Or Better, W Bridge @ 8Ohm 310W Or Better, W Bridge @ 4 Ohm 400W Or Better, Frequency Range : 20Hz – 20Khz Or Better, Thd + N <0.1% Or Better , S/R Ratio >96Db Or Better, Gain 28Db Or Better , Input Sensitivity 2.21Dbu Or Better, Should Have The Following Protections : Mute On/Off, Dc, Internal Fuse. , Wall Mount Speaker:Sitc Of Wall Mount Loudspeaker Having Low Impedance Power Of Min 40 W Or Better @ 8 Ohm, & 16W Or Better @70/100V. Nominal Impedance Of 8 Ohm Or Better Lf Transducer 5 Woofer Or Better, Hf Transducer 0.5 Tweeter Or Better, Should Have Sensitivity (1W @ 1M) Of 90 Db Or Better, Spl Max 106 Db Or Better With Frequency Range Of 94Hz - 20 Khz Or Better. , Speaker Cable 14 Awg : Sitc Ofmulti-Conductor - High-Conductivity Copper Speaker Cable, Twisted Jacketed Connector, 14 Awg Stranded (42X30) Tinned Copper Conductors, Pvc Insulation, Pvc Jacket., Operating Temperature Range : -20°C To +90°C Or Better , Nec/(Ul) Specification:Cl3 Or Better , Awm Specification : Ul Style 2587 (600 V 90°C) Or Better , Csa Specification : Fas90 Or Better, Eu Directive 2011/65/Eu (Rohs Ii) Compliant Or Better, Eu Rohs Compliance Or Better, Approved Makes : Belden , Klotz , Eurocable. , Microphone Cable: Sitc Of Microphone Cable , Audio Sterio / Control Cable: Sitc Of22 Awg Stranded (7X30 ) Stereo Audio / Control Cable Or Better ,High-Conductivity Tinned Copper Conductors Or Better , Polypropylene Insulation Or Better , Should Have Pvc Jacket, Operating Temperature Range: -20°C To +75°C Or Better , Eu Directive 2011/65/Eu (Rohs Ii) Compliant Or Better ,Non Plenum , Approved Makes : Belden , Extron , Eurocable. , Shielded Cat6 Cable: Sitc Of Shielded Twisted Pair Cable Engineered For Optimum Signal Transmission Between Devices Transmitting And Receiving Signal Over Twisted Pair; The Cable Is Certified To 475 Mhz Bandwidth At Distances Up To 330 Feet (100 Meters) And Has Been Independently Tested And Verified To Meet Performance Requirements Set By The Hdbaset Alliance; The Cable Should Be Engineered And Tested To Exceed Hdmi Error Rate Specifications Of Less Than One Pixel Per Billion At 100 Meters; Should Provide Protection From Outside Interference And Ensures High Quality Signal Transmission; Should Have Sf/Utp Design With Four Unshielded 24 Awg Twisted Pair Conductors Inside An Overall Braid And Foil Shield.Approved Makes:-,Extron,Christie, Rgb. , Xtp Dtp 24 Plug, Package Of 10: Sitc Of Plug Should Be Provided With Shielded Twisted Pair For Devices Transmitting And Receiving Signal Over Twisted Pair; Should Be High Performance Category 6A Rj-45 Plug, Metal Strain Relief And Ground Bonding,Suitable For High Emi/Rfi Environments, Should Be Compatible With Tia/Eia 568A/B Wiring Standards, Conductor Alignment Guide Should Reduce Crosstalk And Signal Interference, Should Have Gold Plated Contacts. Approved Makes:-,Extron,Christie, Rgb. , Standard Av Rack With 600Mm Width, 800 Mm Outer Depth And 17U Height : Sitc Of 12U Av Equipment Rack ,Multi Hollow Extruded Aluminum Frames Structure Across The X, Y & Z Axis To Give An Uninstruct Bolting Mechanism ( Ul ) And Further Reinforced With 8 Nos. Of Corner Bracket Which Ensure Better Stability And Strength,Multi Hollow Extruded Aluminum Frames Structure Across The X, Y & Z Axis To Give An Uninstruct Bolting Mechanism ( Ul ) And Further Reinforced With 8 Nos. Of Corner Bracket Which Ensure Better Stability And Strength,,Top Cover Ventilated On All Sides Along The Width And Depth Thereby Enhancing Exhaust Of Hot Air,Cable Entry Provision Is Both At The Top And Bottom Covers With 35Mm Round Cable Entry Point, The Cable Entry Provision Comprising Of A Gland Plate With Cable Entry Points In Round Cut Outs Edge Protected With Rubber Grommets,Castor – 4 Nos. Of Heavy Duty Castors To Take Care Of Heavy Load Bearing Capacities Are Provided, Earthing Strip – Copper Strip To Take Care .Oem Authorization Format(Tender Specific) To Be Attached For Authenticityof The Grounding,Approved Make:Nt/Valrack/Wq , Delivery, Installation, Commissioning ,Programming , User Training,Schematics Charges: Delivery, Installation, Commissioning ,Programming , User Training,Schematics Charges
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
48.
Drinking Water Supply and Sanitation #10406233 Price Bid
Tender For Nagar Panchayat Suchittaganj (Khirauni) Water Supply And House Connection Scheme District-Ayodhya - DISTRIBUTION SYSTEM 2 Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destinationand all taxes and insurance etc. with loading, unloading and stacking all complete. 3 HDPE PipePN-6 PE-100 4 90 mm dia 5 110 mm dia 6 140 mm dia 7 160 mm dia 8 DI Pipe Class K-7 9 200 mm dia 10 250 mm dia 11 300 mm dia 12 Carting of following size & type of pipes and specials to site of work and lowering them into the trenches and laying true to alignmentand gradient and jointing etc. complete including testing of pipe lines and cutting of pipes. 13 HDPE PipePN-6 PE-100 14 90 mm dia 15 110 mm dia 16 140 mm dia 17 160 mm dia 18 DI Pipe Class K-7 19 200 mm dia 20 250 mm dia 21 300 mm dia 22 Excavation for pipeline work in ordinary Soil (loam, clay orsand) with lift up to 1.5 M and lead up to 50 M including filling back the excavated earth into the trenches with watering, ramming and disposal of surplus earth with in 50 M lead. 23 Supply of following sizes D.I.D./F Sluice valve including F.O.R. destination and taxes and insurance etc. complete as per relevant IS. 24 D. I. D/F Sluice Valve 25 80 mm dia 26 100 mm dia 27 125 mm dia 28 150 mm dia 29 200 mm dia 30 Scour valve 80 mm dia 31 Fire Hydrant 80 mm dia 32 C.I. Single ball type Air Valve 25 mm dia 33 Carting of following sizes D.I.D./ F Sluice Valve and specials from departmental store to site of work and lowering them into the trenches, fixing in position and jointingthem with pipelines and testing etc. complete including supply of jointing materials. 34 D. I. D/F Sluice Valve 35 80 mm dia 36 100 mm dia 37 125 mm dia 38 150 mm dia 39 200 mm dia 40 Scour Valve 80 mm dia 41 Fire Hydrant 80 mm dia 42 C.I. Single ball type Air Valve 25 mm dia 43 Supply of all materials and construct following chambers as per type design with supply of all labour, T&P etc. complete. 44 Masonary Type 45 Fire Hydrant Chamber 46 Air Valve Chamber 47 Surface Box Type 48 Dismentling of following type of road and stacking of useful materials including supply of all materials, labour, T&P etc. complete. 49 BOE Road 50 C.C. Road 51 Bitumen Road 52 Interlocking 53 Reinstatement of following type road As per PWD specification 54 BOE Road (with40 % New Bricks and 60 % old Undamaged serviceable bricks) 55 C.C. Road (with 150 mm PCC base of 1:4:8 cement: coarse sand: 40 mm Stone Aggregate and 100 mm Cement Concrete course of 1:1.5:3 cement: coarse sand: 20 mm Stone Aggregate) 56 Bitumen Road PWD1.granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm ) having CBR Value-25 125 mm layer thickness.2.granular sub-base With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 125 mm layer thickness.3. Providing, laying, Spreading & Compacting graded stone aggregateto wet mix macadam. (150 mm thickness)4. Providing & applying PrimeCoat with medium bitumen VG 10 on prepared surfacespreading primer at the rate of 0.75 Kg./Sqm.5.P/L of 40mm thick BC with 100-120 TPH batch type HMP Producing and Avg. Output of 75 TPH using crushed aggt. Of specified grading premixed with bituminous binder VG 30 @ 5.5 %6.Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size7. Providing all necessary barricating and road painting work. 57 Interlocking Tile Road (40 % New interlocking tile 80 mm thick M 35 Grade and 60 % old serviceable tiles , Plain cement concrete in 75 mm thickness 1:6:12 cement :coarse sand: 40 mm stone aggregate in base) 58 Provision for following types of Culvert crossing along the alignment of pipe line complete as per instructions of Engineer ‐in ‐charge. (casing of pipe is done by concreting) 59 Nala/Culvert Crossing ( width ‐3.5 m) 60 Making house connection should be done atleast 2 m inside the boundary wall with provision of tap from distribution line to outer wall of house with supply of 1 m above GL G.I. pipe ( 15 mm ) ( above ground ) & average 5 mtr. MDPE Pipe ( 20 mm) ( below ground) including specials saddle Tapetc. of suitable size T&P etc. including excavation laying and jointing for proper completion of work as per instructions of Engineer as per Dwg 12 (including dismantling and reinstatement of road) 61 In C.C. roads 62 For 90 mm to 110 mm dia 63 For 125 mm to 160 mm dia 64 For 180 mm to 250 mm dia 65 For 250 mm to 300 mm dia 66 In bituminous roads 67 For 90 mm to 110 mm dia 68 For 125 mm to 160 mm dia 69 For 180 mm to 250 mm dia 70 For 250 mm to 300 mm dia 71 In BOE roads 72 For 90 mm to 110 mm dia 73 For 125 mm to 160 mm dia 74 For 180 mm to 250 mm dia 75 For 250 mm to 300 mm dia 76 In C.C. Interlocking Tiles roads 77 For 90 mm to 110 mm dia 78 For 125 mm to 160 mm dia 79 For 180 mm to 250 mm dia 80 For 250 mm to 300 mm dia 81 In Kachcha roads 82 For 90 mm to 110 mm dia 83 For 125 mm to 160 mm dia 84 For 180 mm to 250 mm dia 85 For 250 mm to 300 mm dia 86 LAYING OF RISING MAIN 87 Supply of D.I. pipes (K-9)offollowing size/wall thickness with I.S. 8329/2000 or its latest amendments with jointing materials including FOR destination and all taxes and insurance and including all specials of rising mainetc. complete. 88 150mm dia DI K-9 89 200mm dia DI K-9 90 Excavation of earth for pipe line trenches in ordinary soil (loam, clay or sand) with lift upto 1.5 and lead upto 50M filling back the earth into trenches including watering, ramming and disposal of surplus material with in 50M lead etc. complete. 91 Carting of following sizes D.I. pipes class K-7/9 and specials to the site of work loweering them in to trench and laying true to alignment including testing of pipeline but excluding cost of trenching and cutting of pipes etc. for making of length but including making joints. 92 DI Pipe Class K-9 93 150mm dia DI K-9 94 200mm dia DI K-9 95 Dismentling of following type of road and stacking of useful materials including supply of all materials, labour, T&P etc. complete. 96 BOE Road 97 C.C. Road 98 Bitumen Road 99 Reinstatement of following type road As per PWD specification 100 BOE Road (with40 % New Bricks and 60 % old Undamaged serviceable bricks) 101 C.C. Road (with 150 mm PCC base of 1:4:8 cement: coarse sand: 40 mm Stone Aggregate and 100 mm Cement Concrete course of 1:1.5:3 cement: coarse sand: 20 mm Stone Aggregate) 102 Bitumen Road PWD1.granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm ) having CBR Value-25 125 mm layer thickness.2.granular sub-base With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 125 mm layer thickness.3. Providing, laying, Spreading & Compacting graded stone aggregateto wet mix macadam. (150 mm thickness)4. Providing & applying PrimeCoat with medium bitumen VG 10 on prepared surfacespreading primer at the rate of 0.75 Kg./Sqm.5.P/L of 40mm thick BC with 100-120 TPH batch type HMP Producing and Avg. Output of 75 TPH using crushed aggt. Of specified grading premixed with bituminous binder VG 30 @ 5.5 %6.Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size7. Providing all necessary barricating and road painting work. 103 Supply of all material, labour, T&P and construct RCC thrust blocks at the bends etc. complete. 104 From 150 mm 105 Supply of following sizes D.I.D./F sluice value as per I.S. 14846:2000 working presure 10 kg/cm^2F.O.R. destination and all texes and insurance 106 D. I. D/F Sluice Valve 107 150 mm dia 108 200 mm dia 109 Carting of following sizes D.I.D./F Sluice Valve and specials to site of work and lowering them into the trenches, fixing in position and jointingthem with pipelines and testing etc. complete including supply of jointing materials. 110 D. I. D/F Sluice Valve 111 150 mm dia 112 200 mm dia 113 Supply of all material labour, T&P etc. Required and construct of Sluice Valve Chamber Masonry Type as per type design. 114 Provide all materials labour T&P etc. complete and construct Pump house size (3.6x3.0x3.0)m Chlorinating room size (2.60x1.80x3.0)m as per departmental type design and drawing (drawing No‐D‐2) and as per the specifications for civil work given in the bid document including supply of all material labour and T&P etc complete as per instructions of Engineer ‐in-charge. 115 Construction of O.H.T. 116 Supply of all materials labour T&P etc. complete and construction of R.C.C. (M-30 Grade) Over Head Tank of following capacity and staging above ground level with all work complete, including cost of soil testing. All the components of OHT will be casted in M-30 concrete with cement, coarse sand and approved stone grit as per I.S. 11682, I.S.3370 part (I) & (II) and I.S.456.Minimum depth of foundation below original ground level will be 2.5M. Seismic effects and wind load should be taken into consideration as I.S. 1893 for earthquake resistance and as per I.S. 875 part-III for wind load on structure (this area is in seismic Zone IV and high damage risk zone for wind).The cost of OHT should be quoted assuming the bearing capacity of soil as 8 M.T.per sqm. including 1M wide RCC staircase from ground level to balcony. M.S. ladder made of 50x50x6 mm angle section and 20mm plain M.S. bars(specification of M.S. should be as per IS 800-2007)with hand rails of 20mm medium class G.I. pipes on both sides in three rows from 117 balcony to top dome resting on an RCC platform (75cmx75cm and 10cm thick) projecting from top ring beam and one aluminum ladder inside the tank body (from manhole in top dome to bottom as per design and specification approved by Engineer in charge. 1 m wide R.C.C. M-30 balcony around the tank at the junction point of vertical wall and conical wall. Proper railing of 20mm diamedium class G.I. pipe (in 3 rows) on both sides of stair case, around the balcony, at each landing and from landing with top ring beam upto manhole on the top dome and at the periphery of top dome. The G.I. Pipes will be supported on M.S. posts made ofor RCC post,spaced at intervals not more than 1.5m.Proper ventilator at top dome in circular shape of 1.2 m dia. along with an R.C.C. cover of minimum 1.50m dia and with mosquito net of standard quality along withexpanded metaled jali between top dome and RCC cover. Water level indicator fabricated with good quality minimum45mm x 45mm section, of 3mm thick M.S. plate should have a clear width of minimum 25cm painted with good paint with brass wire rope, pulley, copper ball float, pointer etc.Lightening conductor should be as per I.S.S.2309 or its latest amendments of latest electricity rules. C.I. manhole cover of min 60x60cm size with locking arrangement, Supply, fixing & jointing of D.I.D./F Pipes (for inlet, outlet, washout and overflow pipes) and specials, duck foot bend and fixing of the sluicevalve at outlet and wash out pipe with all specials; construction of sluice valve chamber, floor and apron with semi circular drain around the apron with 25mm PCC 1:2:4 over 75 mm PCC 1:4:8, Apex painting on outer surface of OHT, painting on MS ladder, railing, vertical pipe etc. as per approved make; excavation in all type of soil and all other works required for proper and complete construction of OHT, testing of tank for water tightness as per the satisfaction of Engineer In-Charge. 118 Zone 1, 700Kl Capacity / 20M staging 119 Zone 2, 800Kl Capacity / 22M staging 120 Zone 3, 900Kl Capacity / 22M staging 121 CONSTRUCTION OF NEW BOUNDARY WALL, APPROACH ROAD AND GATE 122 Construction of boundary wall around pumphouse and O.H.T as per type design including supply of all Materials, Labour, Tools and Plants etc. complete. 123 Supply & fixing of 3.60 M & 1.20 M wide MS Gate including fabrication and supply of steel and construction of boundary pillars all complete. 124 Supply Earth filling in plingth including filling, dressing and ramming earth or sand or bajari or ballast or kankar or shingle. 125 Construction of interlocking approach road with both side brick Eadge and earth filling including supply of all materials, labour, tools and plants etc. complete. 126 Construction of MCS, centralized control room including supply of all materials, labour, T & P complete. 127 Construction of chlorine dosing room including supply of all materials, labour, T & P etc. complete. 128 E / M works 129 For Zone - 01 (New TW -02 Nos.) 900 LPM 130 Transportation of Rig Machine & its T&P/equipments to the site of work including loading & unloading, baricating, erection & dismantling etc. 131 Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc. 132 Transportation of OP Unit and its T&P including loading & unloading. erection &dismantling etc. 133 DC Drilling upto 165M 134 Drilling of 600 mm. dia bore from G.L. to 60 m BGL. 135 Drilling of 500 mm. dia bore from 60 mto 100 m BGL. 136 Drilling of 500 mm.dia bore from 100 M bglto 165 m BGL. 137 LOWERING OFTUBE WELLASSEMBLYAND SHROUDINGOF TW BY GRAVEL 138 Welding and lowering of TW Assembly (including electrodes welding set and generator etc. required for completion of work) as per following : Lowering of 300mm X 150mm dia (tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165 m BGL. 139 300mm dia MS ERW pipe from G.L. to 54 mBGL 140 150 mm.dia M.S ERWplain/ slotted pipe from 54 m BGL to 100 m BGL 141 150 mm.dia M.S ERWplain/ slotted pipe from 100 m BGL to 150 m BGL 142 TUBE WELL ASSEMBLY : Supply including loading & unloading of TW assembly of MSERW pipe. 143 M.S. Tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) well cap, bail pliug, clamp, reducer, centre guide, support structure etc as required & as per typed design complete in all respect. 144 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick ,required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect . 145 150mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mmthick , 1 noM.S. bail plug , required center guide etc comp in all respect. 146 PEA- GRAVEL 147 Supply of 1.6 mm to 4.8 mm size pea gravel duly screened and washed as per IS 4097 148 DEVELOPMNET OF TUBE WELL 149 Development of Tube well by 250 PSI Compressoras per IS-11189 including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 150 DEVELOPMENT OF TUBE WELL BY 3 Cusec O.P. UNIT AS PER IS 2800 :- 151 Development of Tube well by 3 Cusec O.P. Unit including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 152 TEST : 153 Chemical and Bacteriological test of water sample from departmental approved lab 154 Electrical Logging of the Bore 155 Barricading Arrangement at Site during construction of TW & Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development( Compressor & O.P.Unit) of work. 156 Pumping Plant including Servo Stablizer and Chlorinating Plant 900 LPM/55 M Head - 02 Nos( 02 Nos. for New TW) 157 SITC of900 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900rpm, 20 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), earthing, painting, Toolset, Power wiring of pump house internal and external, 2 Tonne chainpully block P-type indef make, and all pumping plant accessories with nut bolts and rubber packing etc. 158 Fully automatic ServoVoltage Stabilizer having(25 KVA or suitable capacity as per actual site requirements and as per direction of Engineer in Charge) fully copper winding 3- phase A.C. Supply 50 Hz.input voltage 200 V output voltage 470 V with T/F oil ,power cable & earthing etc.complete in all respect or as per direction of engineer in charge/ as per site requirement. 159 SCADA compatable chlorinatingSystem 160 CE / UL certified Intelligent smart energy meter 161 Motor OperatedActuator with Sluice Valve (150mm) 162 CE / UL certified Electromagnetic flowmeter of size:150mm 163 Digital Soft starter (15 KW) 164 Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (100 Amps) 165 CE / UL certified Hydrostatatic type sub soil water level transmitter 166 CE / UL certified Pressure Transmitter 167 CE / UL certified Surge protector for control panel 168 CE / UL certified 7 HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters 169 Control panel with IP 54 protection, industrial grade fro all equipments (separate for control (24V) and power equipments. 170 Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse upto meter 171 Fully Automation of TW & OHT through SCADA complete in all respect including mobile based app development and interconnection with MCS and central control room Lucknow with CE&UL Certified PLC/RTU in IP54 including GSM/GPRS based wireless communication with 4G modem for RTU/PLC or as per direction of engineer in charge/ as per site requirement. 172 Automation ofESR Through SCADA For Zone - 1 173 Double Solenoid Flow Control Valve 200 mm dia 174 Double Solenoid Flow Control Valve 250 mm dia 175 CE / UL certified Pressure Transmitter 176 CE / UL certified Electromagnetic flowmeter of size 200 mm dia 177 CE / UL certified Electromagnetic flowmeter of size 250 mm dia 178 Resedual Chlorine Analyser 179 Required Equipments to br install at OHT 180 Motor operated Sluice Valve with Actuator 300 mm dia Size 181 Electromagnetic Flowmeter 300 mm dia Size 182 Ultrasonic Level Sensor 183 For Zone - 02 (New TW -02 Nos.) 900 LPM 184 Transportation of Rig Machine & its T&P/equipments to the site of work including loading & unloading, baricating, erection & dismantling etc. 185 Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc. 186 Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc. 187 DC Drilling upto 165M 188 Drilling of 600 mm. dia bore from G.L. to 60 m BGL. 189 Drilling of 500 mm. dia bore from 60 mto 100 m BGL. 190 Drilling of 500 mm.dia bore from 100 M bglto 165 m BGL. 191 LOWERING OFTUBE WELLASSEMBLYAND SHROUDINGOF TW BY GRAVEL 192 Welding and lowering of TW Assembly (including electrodes welding set and generator etc. required for completion of work) as per following : Lowering of 300mm X 150mm dia (tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165 m BGL. 193 300mm dia MS ERW pipe from G.L. to 54 mBGL 194 150 mm.dia M.S ERWplain/ slotted pipe from 54 m BGL to 100 m BGL 195 150 mm.dia M.S ERWplain/ slotted pipe from 100 m BGL to 150 m BGL 196 TUBE WELL ASSEMBLY : Supply including loading & unloading of TW assembly of MSERW pipe. 197 M.S. Tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) well cap, bail pliug, clamp, reducer, centre guide, support structure etc as required & as per typed design complete in all respect. 198 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick ,required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect . 199 150mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mmthick , 1 noM.S. bail plug , required center guide etc comp in all respect. 200 PEA- GRAVEL 201 Supply of 1.6 mm to 4.8 mm size pea gravel duly screened and washed as per IS 4097 202 DEVELOPMNET OF TUBE WELL 203 Development of Tube well by 250 PSI Compressoras per IS-11189 including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 204 DEVELOPMENT OF TUBE WELL BY 3 Cusec O.P. UNIT AS PER IS 2800 :- 205 Development of Tube well by 3 Cusec O.P. Unit including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 206 TEST : 207 Chemical and Bacteriological test of water sample from departmental approved lab 208 Electrical Logging of the Bore 209 Barricading Arrangement at Site during construction of TW & Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development( Compressor & O.P.Unit) of work. 210 Pumping Plant including Servo Stablizer and Chlorinating Plant 900 LPM/55 M Head - 02 Nos( 02 Nos. for New TW) 211 SITC of900 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900rpm, 20 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), earthing, painting, Toolset, Power wiring of pump house internal and external, 2 Tonne chainpully block P-type indef make, and all pumping plant accessories with nut bolts and rubber packing etc. 212 Fully automatic ServoVoltage Stabilizer having(25 KVA or suitable capacity as per actual site requirements and as per direction of Engineer in Charge) fully copper winding 3- phase A.C. Supply 50 Hz.input voltage 200 V output voltage 470 V with T/F oil ,power cable & earthing etc.complete in all respect or as per direction of engineer in charge/ as per site requirement. 213 SCADA compatable chlorinatingSystem 214 CE / UL certified Intelligent smart energy meter 215 Motor OperatedActuator with Sluice Valve (150mm) 216 CE / UL certified Electromagnetic flowmeter of size:150mm 217 Digital Soft starter (15 KW) 218 Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (100 Amps) 219 CE / UL certified Hydrostatatic type sub soil water level transmitter 220 CE / UL certified Pressure Transmitter 221 CE / UL certified Surge protector for control panel 222 CE / UL certified 7 HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters 223 Control panel with IP 54 protection, industrial grade fro all equipments (separate for control (24V) and power equipments. 224 Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse upto meter 225 Fully Automation of TW & OHT through SCADA complete in all respect including mobile based app development and interconnection with MCS and central control room Lucknow with CE&UL Certified PLC/RTU in IP54 including GSM/GPRS based wireless communication with 4G modem for RTU/PLC or as per direction of engineer in charge/ as per site requirement. 226 Automation ofESR Through SCADA For Zone - 2 227 Double Solenoid Flow Control Valve 200 mm dia 228 Double Solenoid Flow Control Valve 250 mm dia 229 CE / UL certified Pressure Transmitter 230 CE / UL certified Electromagnetic flowmeter of size 200 mm dia 231 CE / UL certified Electromagnetic flowmeter of size 250 mm dia 232 Resedual Chlorine Analyser 233 Required Equipments to br install at OHT 234 Motor operated Sluice Valve with Actuator 300 mm dia Size 235 Electromagnetic Flowmeter 300 mm dia Size 236 Ultrasonic Level Sensor 237 For Zone - 03 (New TW -02 Nos.) 1100 LPM 238 Transportation of Rig Machine & its T&P/equipments to the site of work including loading & unloading, baricating, erection & dismantling etc. 239 Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc. 240 Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc. 241 DC Drilling upto 165M 242 Drilling of 600 mm. dia bore from G.L. to 60 m BGL. 243 Drilling of 500 mm. dia bore from 60 mto 100 m BGL. 244 Drilling of 500 mm.dia bore from 100 M bglto 165 m BGL. 245 LOWERING OFTUBE WELLASSEMBLYAND SHROUDINGOF TW BY GRAVEL 246 Welding and lowering of TW Assembly (including electrodes welding set and generator etc. required for completion of work) as per following : Lowering of 300mm X 200mm dia (tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165 m BGL. 247 300mm dia MS ERW pipe from G.L. to 54 mBGL 248 200 mm.dia M.S ERWplain/ slotted pipe from 54 m BGL to 100 m BGL 249 200 mm.dia M.S ERWplain/ slotted pipe from 100 m BGL to 150 m BGL 250 TUBE WELL ASSEMBLY : Supply including loading & unloading of TW assembly of MSERW pipe. 251 M.S. Tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) well cap, bail pliug, clamp, reducer, centre guide, support structure etc as required & as per typed design complete in all respect. 252 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick ,required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect . 253 150mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mmthick , 1 noM.S. bail plug , required center guide etc comp in all respect. 254 PEA- GRAVEL 255 Supply of 1.6 mm to 4.8 mm size pea gravel duly screened and washed as per IS 4097 256 DEVELOPMNET OF TUBE WELL 257 Development of Tube well by 250 PSI Compressoras per IS-11189 including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 258 DEVELOPMENT OF TUBE WELL BY 3 Cusec O.P. UNIT AS PER IS 2800 :- 259 Development of Tube well by 3 Cusec O.P. Unit including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 260 TEST : 261 Chemical and Bacteriological test of water sample from departmental approved lab 262 Electrical Logging of the Bore 263 Barricading Arrangement at Site during construction of TW & Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development( Compressor & O.P.Unit) of work. 264 Pumping Plant including Servo Stablizer and Chlorinating Plant 1100 LPM/55 M Head - 02 Nos( 02 Nos. for New TW) 265 SITC of1100 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900rpm, 25 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), earthing, painting, Toolset, Power wiring of pump house internal and external, 2 Tonne chainpully block P-type indef make, and all pumping plant accessories with nut bolts and rubber packing etc. 266 Fully automatic ServoVoltage Stabilizer having(25 KVA or suitable capacity as per actual site requirements and as per direction of Engineer in Charge) fully copper winding 3- phase A.C. Supply 50 Hz.input voltage 200 V output voltage 470 V with T/F oil ,power cable & earthing etc.complete in all respect or as per direction of engineer in charge/ as per site requirement. 267 SCADA compatable chlorinatingSystem 268 CE / UL certified Intelligent smart energy meter 269 Motor OperatedActuator with Sluice Valve (150mm) 270 CE / UL certified Electromagnetic flowmeter of size:150mm 271 Digital Soft starter (22 KW) 272 Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (125 Amps) 273 CE / UL certified Hydrostatatic type sub soil water level transmitter 274 CE / UL certified Pressure Transmitter 275 CE / UL certified Surge protector for control panel 276 CE / UL certified 7 HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters 277 Control panel with IP 54 protection, industrial grade fro all equipments (separate for control (24V) and power equipments. 278 Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse upto meter 279 Fully Automation of TW & OHT through SCADA complete in all respect including mobile based app development and interconnection with MCS and central control room Lucknow with CE&UL Certified PLC/RTU in IP54 including GSM/GPRS based wireless communication with 4G modem for RTU/PLC or as per direction of engineer in charge/ as per site requirement. 280 Automation ofESR Through SCADA For Zone - 3 281 Double Solenoid Flow Control Valve 300 mm dia 282 Double Solenoid Flow Control Valve 250 mm dia 283 CE / UL certified Pressure Transmitter 284 CE / UL certified Electromagnetic flowmeter of size 300 mm dia 285 CE / UL certified Electromagnetic flowmeter of size 250 mm dia 286 Resedual Chlorine Analyser 287 Required Equipments to br install at OHT 288 Motor operated Sluice Valve with Actuator 300 mm dia Size 289 Electromagnetic Flowmeter 300 mm dia Size 290 Ultrasonic Level Sensor 291 Supply, installation,testing & Commissioning of SCADA LCS For Zone 01 to 03 292 Scada LCS (Local Control Station) complete in all respector as per direction of engineer in charge/ as per site requirement. 293 Three Month Trial & Run of TW, LCS, Pumping plant with consumable items till handing over includingwatch & ward .
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Uttar Pradesh View Result →
49.
Educational and Research Institute #10372706 Price Bid
Procurement Of Equipment, Instrument, Machineries, Tools Etc. Related To Laboratories Procurement Of Equipment Related To Laboratories And Workshops Of Mechanical Electrical Civil Chemical Engineering And Science Humanities Departments Of Hooghly Institute Of Technology Hooghly-Strain Gauge Trainer Kit - Gauge Factor : 2.1 Maximum Bearable Weight : 500 Gm, Cantilever Material : Stainless Steel, Bridge Configuration : Full Bridge Display : 3½ Or 4 Digit Ledwith User Manual 2 Measurement Of Temperature Using Thermocouple, Rtd, Thermistor, Ad950 - Transducers With Electronic Instrumentation Transducers : Thermocouple ( K - Type ) , Thermocouple ( J - Type ) , Thermistor ( Ntc ) , Rtd ( Pt 100 ) , Semiconductor Sensor ( Lm 335 ) And Semiconductor Sensor ( Ad 590 ) With User Manual 3 Bourdon Tube Type Pressure Gauge - Bourdon Tube Type Pressure Gauge, Pressure Range Upto 10, 000 Psi, Accuracy Upto + / -0.25%, With Pumping System 4 Flow Control System Using Mass Flow Meter, Single Loop Controller And Control Valve - Set Up Should Consist Of ---Mass Flow Meter, Single Loop Controller, Control Valve ( Glove ) , Transmitter Should Be Installed At The Upstream Of Control Valve, Controlling Facility By Controller, Continuous Water Recycling Facility, Table Mounted Set Up Preferable With User Manual 5 A / D & D / A Converter Trainer Kit - Analog To Digital Converter • 8-Bit Descrete Adc • On-Board Signal Generator With Adjustable Amplitude Levels • On-Board Led Bank To Observe Digital Outputs • Power Supply : +5V, ±12V Gnd • Interconnection Is Provided By 2Mm Connectors • Experimental Manual Digital To Analog Converter • 8-Bit Binary Weighted Resistors Dac • 8-Bit Ladder Type D To A Converter • Onboard Switches Are Provided For Digital Pattern Generation • 8-Bit Digital Inputs Ranges From 00 To Ff • Extensive Experimental Manual Is Provided With The Kit 6 8051 Based Advanced Microcontrollertrainer - 8051 Microcontroller Trainer Kit;Based On Intels 8051 Microcontroller 12Mhz With • On Board Power Supply • Rechargeable Ni-Cd Battery • Ascii Keyboard Interface • Programming Interface With Pc • Compiler And Cross Assemblers For Programming In C, • Lcd Display, 8051 Usb Programmer, 16*2 Lcd, Light Sensor Module ( Ldr ) , Tsop Sensor Module, 4*4 Matrix Keypad, Aa 6 Cell Holder, Burge Strip F-F Connectors, • 32 K Or Higheruser Ram. ( Expandable ) • Serial I / O Through 8251 Usart • Parallel I / O Lines Available Through Two 8255 Chips • 3 Channels Of 16 Bit Timer / Counters From 8253. 8254 • Adc & Dac Interface Module • Stepper Motor Interface • Square, Triangular, Staircase Wave Generator Interface Module • Dc Voltage, Current Measurement Interface Module • Zero Crossing Detectors Interface Module • Users’ Guide • Cd - Required Software, Usb Cable, Microcontroller & Its Interfacing Book With Application Projects, Cd - Required Software 7 Microcontroller Development Kit - 8051 Development Kit With Accessories And Software 8 Solar Photovoltaic Cell Characteristics Trainer Kit - 12V Solar Module With Suitable Arrangement Of Halogen Lamps 500W, Digital Dc Voltmeter And Ammeter, Lux Meter And Variable Resistive Loadwith User Manual 9 Flux Meter ( Magnetic ) - Integrating Type Digital Fluxmeter, With 3&Half Digit Digital Display, 4- Ranges Of Measurements Indicating Flux Values From 0.1 Kmt ( Kilo Maxwell Turns ) To 2*105 Kmt 10 Digital Storage Oscilloscope ( 70 Mhz ) Detailed Technical Specifications:- A ) No. Of Channels : 2 Or 4 B ) Bandwidth : 70 Mhz C ) Maximum Input : 400 V ( Peak ) D ) Sample Rate : 2 Gsa / Sec E ) Waveform Update Rate : 400 Waveforms / Sec F ) Memory Depth : 100 Kpts Standard ( Upgradable ) G ) Time Base : 5Nsec / Div. To 50 Sec. / Div H ) Waveform Update Rate: 50, 000 Waveforms / Sec I ) Display : 8.5 Inch Colour Wvga J ) Trigger Modes : Force, Edge, And Video, Pulse Width. K ) Built In Interface : Standard Usb 2.0 High Speed Device 11 Lcr Q Meter - Measuring Inductance ( L ) , Capacitance ( C ) , Resistance ( R ) , Quality Factor ( Q ) And Dissipation Factor ( D ) . With A Basic Accuracy Of 0.25% And Five Digit Display Resolution. 12 Diode And Zener Diode Characteristics Trainer - A Complete System To Study The Diode Characteristics Forward And Reverse Characteristics Experiment Can Be Performed On This Trainer Kit Silicon, Zener And Germanium Diode Are Provided With This System. Inbuilt Ammeter And Voltmeter. Digital Display For Displaying Voltage And Current. Different Test Points With User Manual 13 Experimental Kit For Input / Output Characteristics Of Bjt- One Fixed 12V Power Supply, One Variable Constant Voltage Source And One Constant Current Source For Output Characteristic Of The Transistor. Three Digital Meters On The Panel. One Fixed Frequency Of 1Khz With Variable Amplitude , Bread Board With User Manual 14 Training Kit To Study Of Opamp Characteristics - Specification: 2 No. Variable Dc Power Supply 0-3V / 30Ma, 1 No. Fixed Dc Power Supply 12V1 No. Operational Amplifier Ic 741 & Different Types Of Resistance, Capacitors And One Potentiometer With User Manual 15 Training Kit To Study Of Universal Logic Gates & Applications With Power Supply - • On Panel Gates : 4 Nand Gates ( 7400 ) , 4 Nor Gates ( 7402 ) , 4 And Gates ( 7408 ) , 4 Or Gates ( 7432 ) & 6 Not Gates ( 7404 ) • 5 Nos Of Extra 18 Pin Ic Base Mounted On Panel To Use Different Ics • 5 Logic Input Switches With Led • 5 Logic Output Led • On Panel 5 Sockets Each For +5 V & Gnd • Required Numbers Of Patch With User Manual 16 Training Kit For Study Of Kirchhoff’S Current & Voltage Law- Equipped With Necessary Resistors, Digital Voltmeters, Ammeter And Inbuilt Variable Power Supply 5V & 12V.On Board Test Points To Observe Signals, On Board Schematic Diagram, With User Manual 17 Analog Wattmeter - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Dynamometer Type Wattmeters I ) 5-10A, 150-300-600V, Ii ) 10-20A, 150-300-600V. 18 Series Parallel Resonance Of R-L-C Ckt - Kit For Series Parallel Resonance Of R-L-C Ckt: The Set-Up Consist Of Power Supply, Audio Oscillator With Digital Readout, Digital Rms Meters And Different Number Of Inductors ( Smoothly Variable ) , Capacitors, Potentiometer, Ammeter & Voltmeters With User Manual 19 Power Factor Meter ( Single Phase ) - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Power Factor Meter- Dynamometer Type Power Factor Meter , 1 Phase , Current Coil Range : 2.5 & 5.0 Amps. ( Dual Range ) , Pressure Coil Range: 150, 300 Volts ( Double Range ) . 20 Power Supply:Dc - • 2X30v-3A, 5V-3A • Constant Voltage & Constant Current Operation • Digital Displays For Voltage & Current • Adjustable Current Limiter • Protection Against Overload & Short Circuit 21 Training Kit For Verification Of A ) Superposition Theorem. B ) Thevenin’S Theorem. C ) Norton’S Theorem. D ) Maximum Power Transfer Theorem. Two Nos. Variable Dc Power Supply. Two Nos. Resistive Potentiometer ( Pot ) . Differnt Values Sets Of Resistances. Digital Dc Voltmeter, Dc Ammeter, Complete Operating Manual, Connecting Wires , Patch Cords, Etc. 22 Ac Distributor Simulator - Transmission Line Trainer Consist Of:- 100 Km X 3 Phase Tx Line Block At The End Of Each Block Short Is Possible All Digital Multifunctional Meters At The Sending & Receiving End, Loading Provision For Total 1Kva – Load Of Variable Separate Inductive, Capacitive & Resistive Load Bank. High Quality Patch Cord And User Manual. 23 Lux Meter - Sensitivity – 1 - 50, 000 Lux Error Percentage + 5%, 4 ½ Digit To 5 ½ Digit Detail Operating Manual Also To Be Supplied 24 Dielectric Strength Test Setup For Transformer Oil - Transformer Oil: Breakdown Voltage : 0-60Kv, Vertical Panel Mounted With Voltmeter, Glass Cover Encapsulated, Test Cup And Gap Measuring Gauge With 10 Liter Of Transformer Oil 25 Digital Insulation Tester , Digital Insulation Tester: 500V, 200Mohm, Portable Type 26 Half Wave & Full Wave Bridge Rectifier Trainer Kit, 1 / 2 Wave, Fullwave ( Centre Tapped & Bridge ) With Filter Ckt With User Manual 27 Experimental Kit For Characteristics Of Zener Diode, Complete Set Should Consist Of All Accessories To Perform The Experiment Using A Zener Diode Fitted On The Printed Boardwith User Manual 28 Experimental Kit For Input / Output Characteristics Of Bjt, Transistor Trainer Kit Consists Of One Fixed 12V Power Supply, Variable Constant Voltage Source And Constant Current Source For Output Characteristic Of The Transistor.Digital Meters On The Panelwith User Manual 29 Experimental Setup For Implementation Of Adder & Subtractor, With Adder ( Half & Full ) & Subtractor ( Half & Full ) Using Basic Gates. Must Have Onboard Input Supply, Display To Show Logic Outputwith User Manual 30 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer With Power Supply, Display Unit, Patch Cords, Necessary Ic And Manuals For Each. 31 A / D & D / A Converter Trainer Kit 8 Bit With Accessories And Manual. 32 Scr Single Phase Half Wave, Full Wave, Fully Controlled Bridge Rectifier / Converter With In-Built Meters And On-Board Power Supplywith User Manual 33 Training Kit For Study Of Vi Characteristic Of Scr, Igbt , With Separate Section For Scr And Igbt Characteristics With In-Built Meters And Led Indicationswith User Manual 34 Scr Firing Circuit, Power Requirement: 230 Vac +10%, 50Hzstandard Accessories:6 Volt / 1 / 4 W Lamp, Patch Chords & Instruction Manual 35 Training Kit For Study Of Vi Characteristic Of Diac, With Proper Heat Sink And Training Manual.Consists Of One No. Diac With Proper Heat Sink.All Components Should Mount On A Screen Printed Pcb Fixed On Acabinets 36 Scr Commutation Circuit, Scr Commutation Circuit Commutation Techniques Used . I ) Class A Ii ) Class B Iii ) Class C Iv ) Class D V ) Class E Vi ) Class F • In Built Ic Based Dc Regulated Fixed Power Supply +12Vdc & Acwith User Manual 37 Electronic Energy Meter, A.C. Single Phase, 2 Wire Solid State ( Static ) Fully Electronic Energy Meter, Accuracy Class 1.0 & Current Rating 5-30 Amp. With Backlit Lcd Display For 240 Volt System Fitted With Pilfer Proof Meter Box. 38 Trainer Kit For Measurement Of Medium Resistance By Wheat Stone Bridgekit Must Have Inbuilt Power Supply, Measurement Range 1 Ohm – 100 Ohm, Having Sensitive Galvanometer With User Manual 39 Trainer Kit For Measurement Of Low Resistance By Kelvins Double Bridge, With Power Supply, Range 1 Microohm -1 Kiloohm, Having Sensitive Galvanometerwith User Manual 40 Earth Tester, Insulation Reslstance Test: More Than 25 Megohms At 500 V Dc Between Electrical Circuit & Containing Case, Display: Led Or Lcd. Dual Ranges: 0 - 10 - 1000 Ohm ( B ) 0 - 5 - 500 Ohm 41 Trainer Kit For Measurement Of Inductance By Anderson Bridgekit Must Have Built In Power Supply, Inbuilt Signal Source, Application Bridge On Screen Printed Front Panel Display, Set Of Unknown Inductance Coil, Variable Resistance, Set Of Capacitance, Audio Null Detector, Patch Cords, Connecting Wires And Head Phone, Complete Operating Manual. 42 Trainer Kit For Measurement Of Capacitance By Schering Bridge Kit Must Have Input Supply 50 Hz Sine Wave, Two Ratio Dial P & Q, Each Having 1, 10, 100, 100 Ohm Coil, 3 Decade Dial, X 0.001 Microfarad, 0.01 Microfarad, 0.1 Microfarad. Having Sensitive Head Phonewith User Manual 43 Tri-Vector Meter 3Ph 4 Wire Lt Ct & 3Ph 3 / 4 Wire Ht Ct / Pt Operated Fully Static Amr Compatible Tri-Vector Energy Meters Dlms Compliant – Category C 44 Trainer Kit For Measurement Oflinear Displacement Bylinear Variable Differential Transformer ( Lvdt ) For Linear Displacement, Type: Spring Loaded Core Type, Configuration: Axial Type Lvdt Full, Actual Displacement: By Micrometer Arrangement Pitch: 1 Mm, Circuit: Ac Excitation Source, Phase Detector & Digital Display, Excitation Source: Sine Wave Of 2 Khz To 5 Khz Variable Frequency And 0 To 5 Or 12V Variable Amplitude, Readout: Digital Display To Measure 0 To + / - 10 Mm, Indicating, Displacement In Millimeters With Core In / Out Indicated By + Sign, Test Points: Instruction Manual 45 Measure Pressure Using Pressure Sensor Kit.Resistive Pressure Transducer With Pressure Of 0-300Mm Hg / 6Psi, Primary Excitation Voltage Of 5V Dc On Board Provided. On-Board 41 / 2 Digital Panel Meter Provided Using Ad7135. Pressure Generation And Monitor Using A Pressure Gauge. Onboard Instrumentation Amplifier Provided With User Manual. 46 Trainer Kit For Op-Amp As Inverter, Non-Inverting Modefront Panel Built With High Class Insulated Printed Circuit Board Sheet With Well Printed Circuits And Symbols. Fuse For Short Circuit Protection. Patch Cords. The Trainer Is Housed In Abs Plastic / Wooden Cabinet.Size Of The Trainer Set 12”X8”. Instruction Manual. 47 Trainer Kit For Op-Amp As Adder, Differentiator And Integrator Instrument Comprises Of Two Dc Regulated Power Supply 0-5V Dc, ±15V Dc, One Meters To Measure Input And Output Voltage & Combination Of Resistance, Capacitors Mounted On Front Panelwith User Manual 48 Convert Digital Data Into Analog Data By Using Analog To Digital Converters And Analog Data Into Digital Data By Digital To Analog Converter Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden Box, Proper Patch Cord With User Mannual.Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden / Metal Enclosure 49 Simulate Differential Protection Scheme For Transformer With Power System Simulation Kit-3-Phase, 415V, 50Hz, Ac Supply. Control Supply : 1-Phase, 230V, 50Hz, Ac Supply. Short Circuit Protection : Hrc Fuses & Mcb. 3-Phase, 3Kva, 415 / 240V, Delta / Star Connected Transformer With Tapings Primary : 0-10-20-100% Secondary - 0-10-20-100% On Each Phase Of Windings, Natural Air Cooled. • Protection Cts : Primary Side Cts 10 / 1A, 5 Va, Cl-1, Wound Primary Typesecondary Side Cts 20 / 0.67A, 5Va, Wound Primary Type. • Fault Simulating Switches : 32A, 2-Pole, On / Off Rotary Switches Are Provided For Creating A ) Line To Ground Fault, B ) Line To Line Fault, C ) Inter-Turn Faultprotective Relays. % Differential Relay Static Type-With Minimum Basic Setting Biased Feature 10%, 20%, 30%, 40%, 50% Setting For Current. Ct Rated 1A Definite Time Over Current Relay • Earth Fault Relay • Aux. Supply To Relay : 110 / 220 V Ac / Dc Educational Bench Model With Schematic Diagram Of The Test Circuit Printed On The Model Test Points & Measurement Points Brought Out & Connected To Terminals, Circuit Setup For Testing Through Interconnections Of Patch Chords With User Manual 50 D.C. Compound Motor ( Open Type ) - 2 Hp- Dc Compound Motor: 2H.P. 1500Rpm, 230V, Open Type For Assemble And Dismantling Of Different Parts Of Stator And Rotor, Commutator, Brush Etc. 51 D. C. Shunt Generator- For O.C.C. Test-Dc Motor:- 2Hp, 1500 Rpm., 220V Dc Generator:- 1Kw, 1500 Rpm, 220V. Necessary Panel To Set Up With Foundation, Voltmeter:0-300V, Ammeter: 0-5A, Ammeter:0-1A, 4-Point Dc Starter. 52 Dc Motor Speed Control System With Power Supply & Motor-Motor 0.5 Hp, Variable Dc ( 0-230V ) Source, Built In Techogenerator, Digital Panel Meter, Power Circuits Of 4 Scrs ( 1200V., 25 A ) I.E. Half Bridge, Facilities Of Studying Torque Speed Characteristics Of Dc Motor, Torque Measurement, Rpm Indicatorwith User Manual 53 Swinburns Test To Compute Efficiency Of Shunt Generator, 1Hp, 220V, 1500Rpm-D.C. Motor:- 2 Hp, 230V, 1500Rpm, Shunt Field. Suitable Panel Withvoltmeter ( 0-300V ) , And Ammeter: 0-1A, Ammeter:0-5A With User Manual & Proper Setup With Foundation 54 Determination Of Equivalent Circuit Parameters Of A Single Phase Transformer By O.C And S.C Test- Transformer: 1 Kva, 230 / 115V, Variac: 0-270V, Panel With Voltmeter: ( 0-50V ) , Voltmeter ( 0-300V ) , Ammeter: 0 -2A, Ammeter:0-10A, Wattmeter: 0-1200W. 55 Compute The Efficiency Of A Single Phase Transformer By Back To Back Test- Complete Set Upwith User Manual: Ac Power Supply 0-230V At 4A ( Optional ) • Operated On Mains Power 230V, 50Hz +10% Digital / Analog Meters: • Voltmeter 2 Nos. ( For Primary And Secondary ) • Ammeter 2Nos. ( For Primary And Secondary ) • Digital Wattmeter 2Nos. 56 Parallel Operation Of Two Single Phase Transformers To Determine The Sharing Of Load Current, Apparent Power And Real Power- Transformer ( 2 Numbers ) : 1 Kva, 230 / 115V, Panel With Voltmeter ( 0-300V / 150V ) , Ammeter: 0-10A, Variable Resistive Load 115V, 10A, Single Phase. 57 Three Phase Transformer With Provision For The Connection In All Vector Groups ( Stardelta, Delta-Star Etc ) - 3-Phase, 1Kva, 415V / 230V, Transformer With Provision For The External Connection Terminals To Perform All Vector Groups ( Star-Delta, Delta-Star Etc. ) . 58 Isolation Transformer - Single Phase, 1Kva , 3Phase , 415V / 230V Isolation Transformer With Provision To Show Its Function And Testing Of It. 59 Tachometer For Speed Measurement-Digital Photo Tachometer • No Contact Rpm Measurement, Wide Measuring Range From 0.5 To 100, 000 Rpm. , Resolution: 0.1 Rpm ( < 1000 Rpm ) . • The Last Value Can Be Stored Into The Memory Automatically & Be Obtained By Pressing Memory Call Button With User Manual 60 4 Point Starter-For Operational Upto 7.5 Hp Dc Motor, 230Vdc. 61 Ac Variac ( Closed Type ) - Single Phase 8A, 0-270V, Rotary Type 62 Clip On Meter-Clip On ( Digital Led Display ) Type Meter Suitable For Measurement Of ( I ) Ac / Dc Current 5 / 10 / 50Amp, With Zero Set Button ( Ii ) Voltage:600Vac / 500Vdc, ( Iii ) Resistance: 0-10Mohms. 63 The Three Phase Squirrel Cage Induction Motor Setup With Various Starters- Complete Panel With Dol, Star-Delta , Auto-Transformer Starter With 2Hp , 3Phase, 415V , 4Pole, 1500Rpm, Squirrel Cage Induction Motor With Suitable Foundation & User Manual 64 Three Phase Squirrel Cage Induction Motor For Direct Load Test To Plot The Various Characteristics-2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 65 Three Phase Squirrel Cage Induction Motor For No Load And Blocked Rotor Test- 2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 66 Three Phase Squirrel Cage Induction Motor For Speed Control-Applicable Methods: I ) Auto-Transformer, Ii ) Vvvf. Specification: 2Hp , 3Hp , 415V, 4Pole, 1500 Rpm Three Phase Squirrel Cage Induction Motor With Necessary Panel Meters And Equipments. 67 Three Phase Slip Ring Induction Motor With Necessary Panel, Proper Base Foundation - To Measure The Open Circuit Voltage Ratio Of The Three Phase Slip Ring Induction Motor.Specification: 2Hp , 3Ph , 415V, 4Pole, 1500 Rpm 68 Three Phase Alternator For Oc, Sc And Load Test-3 Kva, 415 V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With Dc Motor ( Shunt ) 5Hp, 220 V, 1500Rpm, 4-Point Dc Starter, 3-Phase Variable Resistive Load 220 ( L-L ) , 15A Per Phase, With Necessary Panel, Proper Base Foundation 69 Squirrel Cage 1 Hp, 400V I / M & Stroboscope To Measure Slip- I ) 1Hp, 415V, 3-Ph, 50Hz, 1440 Rpm Squirrel Cage Induction Motor With Loading Arrangement. Ii ) Stroboscope For Frequency 0-6Khz. 70 Three Phase Synchronous Motor-Synchronous Motor:3Hp, 415V, 1500 Rpm, Excitor 220V, Dc Through Slipring, Dc Shunt Generator, 1.5Kw, Rpm, 230V Dc, Regulator Control With Necessary Panel, Proper Base Foundation 71 Synchronization Of 3 Phase Alternators By Synchroscope & 3 Lamp Method-Synchronization Of 3 Phase Alternators: 2- Numbers Of 3 Kva, 415V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With 2-Numbers Of Dc Motors ( Shunt ) 5Hp, 230Vdc, 1500Rpm Alongwith Synchronisation Panel With Synchronoscope, 3-Lamps ( With Fuse ) For Lamp Method, Ammeters & Voltmeters For Dc Motors And Alternator, Digital Frequency Meter, Digital Rpm Meter For Dc Motors, 4-Point Dc Starters For Both Motors, 3-Phase Star Connected Variable Resistive Load, 4-Pole Mcb ( S ) & Variable Dc ( With 2-Pole Mcb ) Field Control For Both Alternators. The Whole Set-Up Needs To Be Equiped With Proper Electrical Protection, Base Foundation, Connector Cables, With User Manual, 72 Stepper Motor Controller Trainer-Stepper Motor Controller Trainer Stepper Motor : Motor Type :Unipolar, Torque : 6 Kg-Cm Phase Current : 0.8 Amp. , Stepping Angle : 1.8° / 0.9° Operating Voltage : 12 V Dc Input Pulse : 5V Ttl Compatible, Test Points :20 Gold Plated With User Manual 73 D.C. Servometer Speed Control -Trainer Kit-Kit For D.C. Servometer Speed Control- Position Control Of A 12V, 1A D.C.Gear Motor ( 50 Rpm ) Provision For Positive And Negative Tacho Generator Feedback Tacho Constant: 2V / 1000 Rpm Approximately Calibrated Dials For Reference And Output Position: Resolution 1° Servo-Potentiometers With Full 360°Rotation Microprocessor Based Waveform Capture / Display Card Built-In 3½Digit Dvm For Signal Measurements Built-In Step Signal And Ic Regulated Power Supplies For Electronic Circuits Separate Unit For Motor In A See-Through Cabinet 220V±10%, 50Hz Mains Operation With User Manual 74 Oil Hydraulic Circuit Trainer Unit: Hydraulic Circuit Trainer Unit Consisting Of Standard Components And Accessories For Carrying Out The Study Of Various Hydraulic Components And Hydraulic Circuits Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals 75 Pneumatic Trainer Kit With Compressor: Unit Is To Be Provided With Standard Mounting Board ( Modular Type ) With All Trainer Kits. All The Products Are To Be Provided With Suitable “One Touch Fittings / Push-In Fittings”.Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make , Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentionedalong With Delivery And Maintenance Kit & Manuals. 2 Hard Copies Of Operation Manual To Be Supplied; Installation, Demonstration And Training Of Faculties Are To Be Given. 76 Air Conditioning Trainer : Standard Specifications To Demonstrate The Basic Functioning Of Air-Conditioning. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manual. 77 Refrigeration Trainer: Standard Specifications To Demonstrate The Basic Functioning Of Vapour-Compression Cycle. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals. 78 Plug Gauge: Plug Gauge, Dimension: 25.4-0.5 Mm, Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned. 79 Refrigerator 190 Lit, Direct-Cool Single Door Refrigerator 80 Analog Rough Balance 0-2 Kg, Pan Shape Rectangle Weight Display Analog 81 Analog Rough Balance 0-5 Kg, Pan Shape Rectangle Weight Display Analog 82 Borosil Burette Fitted With Boroflow, 100Ml 83 Borosil Burette Fitted With Boroflow, 50Ml 84 Borosil Burette Fitted With Boroflow, 25 Ml 85 Borosil 3.3 Glass Beaker With Graduation Marks, 1000Ml 86 Borosil 3.3 Glass Beaker With Graduation Marks, 500Ml 87 Borosil 3.3 Glass Beaker With Graduation Marks, 250 Ml 88 Spylx Burette Stand With Clampboss Head And Rod, Burette Stand With Clampboss Head And Rod 89 Transparent Borosilicate Glass Volumetric Flask, 250 Ml 90 Transparent Borosilicate Glassvolumetric Flask, 500 Ml 91 Borosilglass Rod , Outer Diameter: 7Mm, Length: 205 Mm, Material: Polished 3.3 Borosilicate Glass 92 Test Tube Holder, Material: Wrought Iron, Length: 200 Mm, Maximum Opening: 20 To 25 Mm 93 Spherometer: Minimum Length Of Leg 25 Millimeter, Minimum Diameter Of Leg 4 Millimeter, Pitch Of The Screw 1 Millimeter, High Grade Tool Steel 94 Instrument To Observe The Effects Of Frictions Using Inclined Plane: Consisting Of A Wooden Plane 90X18cm Having Adjustment For Setting The Required Angle Precisely Complete With Frictionless Pulley Linear And Circular Scale Pan A Wheeled Trolley And A Set Of Eight Slide Draws Having Bottom Of Different Materials.Base Board Very Superior Quality Having Thick Teak Wood Base, Fittedwith Glass Plate, Complete With Brass Arc, Leveling Screws Pan , Pulley And Iron N.P Roller Export Quality. Heavy Pattern. 95 Stainless Steel Led Digital Vernier Calliper: Mitutoyo, Made In Japan, Length 6, Vernier Constant 0.01Cm , Made Of Stainless Steel, Measure Internal, External And Height Dimensions , Digital Display 96 Verification Of Kirchoffs Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance -1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 20V, Number Of Led Indicators Available To Indicate Power Input -1, Availability Of Dc Voltmeter Available On Board -Yes, Range Of Dcvoltmeter - 0-30Volt, Availability Of Dc Ammeter On Board- Yes, Range Of Dc Ammeter - 0-50 Ma, Number Of Test Points Provided Onboard To Observe Signals - 14, Necessary Patch Cords Available For Interconnection - Yes, Casing Material - Plastic. Two Round Analog Meters For Voltage & Current Measurement, Components Are Mounted Behind The Panel With Printed Circuit Diagram, Connections Are Brought With 4 Mm Banana Sockets, Instrument Fitted In Highly Shockproof Plastics Box, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Student Instruction Manual Will Be Provided With The Trainer Kit, 97 Instrument To Verify Inverse Square Law Of Radiation Using Photoelectric Effect: Type Of Display For On-Board Measurement- Digital, Availability Of Dc Voltmeter On Board - Yes, Range Of Dc Voltmeter - 0-20Volt, Availability Of Dc Ammeter On Board - Yes, Range Of Dc Ammeter - 0-100 Ma, Number Of Dc Regulated Power Supply With Short Circuit And Overload Protection-2, Voltage Range Of Continously Variable Dc Power Supply -20 Volt, Number Of Potentiometers Provided Onboard - 1, Number Of Test Points Provided In The Circuit To Observe Voltage And Current Signal - 5, On Board Schematic Diagram - Yes, Casing Material-Plastic, Number Of Led Indicators Available To Indicate Power Input - 1, Provision Of On-Board Knob For Adjusting The Voltage - Yes.Wooden Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter. On Board Analog Moving Coil Meters , Galvanometer : 30-0-30, Selenium Photocell Mounted In The Metal Box With Metal Base, Lamp Holder With 60-Watt Bulb With Metal Base, Weight : 1.0Kg Approx.Standard Accessories : Selenium Photocell Mounted In The Metal Box, Wooden Plank With Half-Meter Scale Fitted On It, Lamp Holder With Lamp, Patch Chords, Instruction Manual, 98 Conversion Of Galvanometer Into Ammeter Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 99 Conversion Of Galvanometer Into Voltmeter Kit:Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 100 Ohms Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance- 1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 5 Volt, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board -Yes, Availability Of Dc Ammeter On Board - Yes, Casing Material - Plastic.Ohms Law App: To Verify The Ohms Law: Fitted With Slidingrheostat.Onedcvoltmeter, Mo.65&Onedcammetermo-65, Mounted On The Same Base With Terminals, 4 Mm Patch Cords Are Provided With The Trainer Kit For Interconnections 101 Pn Junction Diode Characteristics Kit: Compleate Set With Inbuilt Power Supply & With Digital Voltmeter & Ammeter Compatible For Both Forward & Reverse Bias 102 Boyles Law Apparatus: Burrete Graduated In Cc ( Or Ml ) With 1.0 Cc / Div. Scale Graduated On Both Sides ( Left & Right ) With Same Marking. Both Open And Closed Tubes Can Be Slided Up And Down Over Aluminium Rod. High Quality Synthetic Tube ( 1.0 M Long ) . One Spare Synthetic Tube. ( Withextra 500Gm Mercury ) . Superiorquality, Open&Closedtypeonemeterlongteakwoodboard Onheavy Metal Base Fitted With Leveling Screws Without Mercury But Complete With Pressure Rubber Tubing & Glass Tubes, Routinequality, Doublerodwithopen& Closedendtubes&Pressuretubing. 103 Instrument To Determine The Moment Of Inertia Of A Flywheel About Its Own Axis Of Rotation: Good Quality Stainless Steel Full Setup.Csi Superiorquality Flywheel With Weights , Comprising Of Carefully Machined And Balanced Cast Iron Wheel And Steel Spindle Is Supported On Ball Bearings In Strong Iron Brackets, Thickness: 4.4 Cm, Diameter :20 Cm, Wall Type With Pointer, With Revolution Counter, Set Ofslotted Weights For Flywheel Complete With Weights Cord And Hook. 104 Instrument For Determination Of Spring Constant Of Horizontal & Vertical Spiral Spring Setup: Stand With Heavy Base, Transparent Scale With Mm Resolution, Horizontal Support For Spring, Brightly Colored Stretch Indicator, Three Springs With Identical Diameter And Length, But Different Spring Constants, Three Of Each Spring Included, For A Total Of Nine Springs: Spring Constants Are 5 N / M, 8 N / M, 70 N / M.Consisting Of 45Cm Long Mirrorscale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand, On Metal Stand With Mirror Scale, Superior On Heavy Base, About 50 Cm High For Taking More Readings, Complete With Weights, Helical Spring: Light Spiral Spring With Pointer, Easy To Work With 50 Gm.Weight Complete With Hook For Hanging 105 Stainless Steel Led Digital Outside Micrometer: Mitutoyo: Made In Japan, 0.25Mm-0.01Mm, Least Count 0.01Mm, Made Of Stainless Steel, Digital Display. 106 Linear Expansion Coefficient Apparatus:- Superiorquality , Height 50 Cm, With Brass Rod, Stainlesssteel Finish A 50 Cm Long Expansion Base With A Built-In Dial Gauge And Thermistor.Three Metal Tubes — Brass, Copper ( 99.5%Cu, 0.5% Te ) , And Aluminum ( 98.9% Al, 0.7% Mg, 0.4% Si ) : 6.4 Mm Outside Diameter. A Foam Insulator To Avoid Heat Loss At The Thermistor Connection Point.Thermoplastic Elastometer Tubing With 6.4 Mm I.D.A Source Of Steam Or Hot Water, Such As The Pasco Model Td-8556A Steam Generator.A Digital Ohmmeter Such As Pasco Model Se9589 To Measure The Thermistor Resistance. Leads Should Have Banana Plug Connectors, Such As Pasco Model Se-9750 Or Se-9751 Patch Cords 107 Gclamp-4 Inchirwin 4 Inch / 100 Mm Record H / D G-Clamp T1204 108 Post Office Box-Post Office Box Of Material-Brass And Coil Manganin, Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing 109 Muffle Furnace-Voltage ~230 V Ac, Insulating Maximum Temperatures 1000 C / 1200 C & Working Temperature 930 C / 1130 C Controlled By Digital Temperature Controller Cum Indicator 110 Digital Conductivity Meter-Electrode : Cell K = 1 – Pvc Sleeved Power Required: 230 V Ac 10%, 50 Hz, 5 Va Or 9 V Battery Standard Conductance: Conductance Of 1.000 M Stirrer Speed: 200 Rpm 111 Redwood Viscometer No.1-Material Stainless Steel Voltage 220 Volt Power Source Electric Frequency 50 Hz Phase Single Phase Accuracy + / - 3 °C Readability + / - 0. 5 Degree Capacity 50 Ml 112 Flash Point Apparatus With Stirrer-Voltage-115 V / 230 V, 50 Hz / 60 Hz Measuring Range- Up To 110 °C 113 Daniel Cell-Copper Vessel Complete With Porous Pot & Zinc Rod Diameter ~ 3.5- 4 Inch 114 Digital Voltmeter-Voltage -50-500 V Ac Accuracy ±10% 115 Arsenic Detection Kit-Reaction Time: 10 Minutes Test Type: Test Strip Colour Comparison Results Duration: Rapid 116 Digital Ph Meter-Resolution: 0.01 Ph Range: 0.0 To 14.0 Ph Temperature Controller Display 3 Digit 117 Cube Mould ( 70.6 Mm ) These Are Used For Casting Cement Mortar Test Specimens For Carrying Out Compressive Strength Test Of Cement As Per Is:516. These Moulds Are Manufactured As Per Is Specifications. The Faces Are Machined Flat Within ±0.02 Mm Tolerance And The Inside Dimensions Are Accurate Within ±0.2Mm. Each Mould Is Supplied With A Base Plate. Mould, Steel, For 70.6Mm Cube As Per Is: 10080-1982 Weight: Must Be 6.5 Kg Or More. Should Be Isi Mark. These Cube Moulds Are Made Of Steel. The Tolerance Between Faces Is Maintained At ±0.1 Mm And Plainness Is +0.03Mm. Cube Moulds Carry Isi Mark 118 Digital Rebound Hammer With Calibraton Anvil ( For Concrete Compressive Strength Analysis In The Field And Material Hardness Testing. ) Should Come With Rechargeable Batteries Including Charger. Capabality Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis. Should Conform To Astm C-805, En 12 504-2, Bs -1881- 202 And Other International Standards. Range:10 To 70N / Mm2 Impact Energy: 2.207 N-M Additionally The Following Minimum Specifications Must Be Met. Should Features 16 Character Digital Read Out And Provide Automatic Calculation Of Mean Rebound Number, Compressive Strength And The Median. Should Come With Rechargeable Batteries Including Charger. Capability Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis Is Required. The Necessary Software And The Required Cables For Connecting To The Computer Should Be Provided. A Calibration Anvil Should Be Provided 119 Ductility Testing Apparatus: Ductility Testing Machine Is: 1208 -1978 For Determining The Ductility Of Asphaltic Bitumen, Native Asphalt, Cut Back Bitumen And Blown Type Bitumen. It Consists Of Three Mould Assemblies On A Base Plate. A Separate Briquette Mould ( Total Length 75 ± 0.5 Mm, Distance Between Clips 30 ± 0.3 Mm, Width At Mount Of Slip 20 ± 0.2 Mm, Width At Minimum Cross Section 10 ± 0.1 Mm, Thickness Throughout 10 ± 0.1 Mm ) For Casting The Specimens Is Also Supplied. A Water Bath Of 10 Litres Capacity With A Perforated Shelf Not Less Than 50 Mm From The Bottom Of Bath And A Thermostat Controller For Heater. The Machine Has Two Standard Rates Of Travel Of 1 Cm / Mnt And 5 Cm / Mnt. The Movable Bracket Can Be Arrested Or Released Without Switching Off The Motor By A Clutch Arrangement. Suitable For Operation On 220V, 50 Hz, Single Phase Ac Supply. 120 Length Gauge Conforms To Is:2386 ( Part-I ) Used For Determination Of Elongation Index Of Aggregate. Length Gauge With Isi Certification Mark Is:2386 ( Part I ) , It Consists Of A Metal Plate On Which 8 Steel Pins Are Vertically Mounted With Specified Distances In Between. This Assembly Is Mounted On A Hardwood Base 121 Colorimeter ( Digital ) : Colorimeter, Equipped With Easy-To-Use Conventional Style Controls, Making It Ideal For Routine And Educational Use. Standard 10Mm Square Cuvettes, Semi-Micro Volume Cuvettes, Flowthrough Or Pour In / Suck Out Cells Can All Be Used With The Standard Sample Holder. Wavelength Range: 400 To 710Nm Wavelength Selection :: 8 In-Built Gelatin Filters: 430, 470, 490, 520, 540, 580, 600 And 710Nm Measurement Ranges:: 0-100%T, 0-1.50Abs, 0.1 To 1000 Concentration Bandwidth:Typically 40Nm Blank Drift:: 2% / Hr After 15 Minute Warm-Up Photometric Linearity :: 1%T Light Source :: Tungsten Filament Lamp Output:: Analogue, 10Mv Per Digit Power: 230V, 50Hz Size ( L X W X D ) :: 300 X 355 X 120Mm Weight:: 3Kg 122 Cod Test Apparatus: Cod Test Sample For Dry Bath Heating. Temperature 5+ 150 ◦C + / _ 1◦ C. Digital Controller With Heating Block. Sample Being Digested Within 2 Hours With Titration Method Bod Bottle Capacity : 300 Ml B.O.D. Incubators Has Been Designed Especially For Biological Oxygen Demand Determination & Other Applications Like General Incubators, Serum Studies & Enzyme Assays Test. We Can Also Customize The B.O.D. Incubators To Suit The Varied Requirement Of The Clients With In Stipulated Time Frame. Inner Chamber Made Of S.S.304 & Outer Chamber Made Of M. S. Powder Coated Full Length Inner Acrylic Door Permit Inspection Of Specimens Without Disturbing The Tem. Temp Controlled By Solid State Digital Controllers Housing All The Control With Pt-100 Sensor Illumination Light Are Provided For Viewing With Door Limit Switch. Cfc Free Hermetically Sealed Compressor Provide Temp. For Below Ambient Condition. Air Circulation Fan For Maintain Temp. Uniformity Throughout The Chamber. The Chamber Is Provided With Modular Removable Shelves Made Of S. S. For Complete Flexibility In Use. To Work On 230 Volts 50 H2. 123 Validation Protocols : Iq Oq & Pq Documentation With Calibration & Tradability Certificate Of Controller. Safety Features : Built In Temp Deviation Audio Visual Alarm, Safety Thermostat For Overshoot Temp. Cut Off System. Hrc Fuses For Compressor Heater & Mains Time Daily Circuit For Safety Of Compressor. This B.O.D. Incubator Is Available In Below Sizes: Size= 6Cu.Ft Inner Dimension W X D X H = ( 50 X 50 X 70 ) Cm Capacity= 175 Ltr No. Of Shelves= 2 124 Colony Counter: Working Temperature 5 To 50 ◦ C, 4 Digit Red Led Display, Petridish Holder, Fluorescent Lamp, Zero Reset Button, Dimension-30 ( W ) X33 ( D ) X10 ( H ) Cm, Net Weight 6.5 Kg. 125 Digital Nephelometer ( Turbidity Meter ) :Conformance:: Iso 7027 ( Ir Source ) Epa 180.1 ( Tungsten Lamp ) Measurement Range:: Auto-Ranging From 0 - 1000 Ntu Principle:: Nephelometric Non Ratio Accuracy:: + / - 2% Of Reading Plus 0.01 Ntu Resolution:: 0.01 Ntu ( 0 - 9.9 Ntu ) , 0.1 Ntu ( 10- 99 Ntu ) , 1 Ntu ( 100 - 1000Ntu ) . Response Time: < 6 Sec Display:Lcd , 3 Digit Light Source: Tungsten Filament Or Ir - Led ( 860Nm ) Power Supply: 120 - 240 Volts Ac Sample Cells: 30 M Shipping Dimensions :: 27.3X25.4X9.5Cm ( 10.7 X 10 X 3.75 ) Shipping Weight:: 1.92 Kg ( 2.9Lbs ) 126 High Volume Air Sampler: High Volume Sampler ( With Gaseous Attachment ) Technical Specifications :Flow Rate: - 0 To 1.8 M3 / Min Free Flowparticle Size: - Particles 0 To100 Microns & Below Collected On Filter Paper Holder. Spm Bigger Than 100 Microns Collected In A Separate Sampling Bottle Under The Cyclone. Sampling Time: - 24 Hours... 127 Low Volume Air Sampler: State Of The Art Microprocessor Electronics Flowrate And Volume Totalizations Displayed Are Temperature And Pressure ( 4 Options Available ) Classical Stp 0ºc, 760 Mmhg Normal T And P 20ºc, 760 Mmhg Modified Normal T And P 21.1ºc, 760 Mmhg Standard Ambient T And P 25ºc, 760 Mmhg Elapsed Time Meter Auto Zero Calibration Feature Of Flow Sensor Bright Led Display Flow Rate Accuracy Within ± 4% F.S. Rs-232 Communication Port W / Operator Selectable Download Frequency For Real-Time Data Auto Shut-Off On Time Or Volume 110 – 120 Vac, 50 / 60Hz; Single Phase 128 Hydraulic Bench: Top Tray: Size 1000 X 700 X 100 Mm ( Approx ) Water Circulation: 1 Hp Pump. Flow Measurement: Using Measuring Tank, Capacity 40L. Sump Tank: Capacity 100 Ltrs. Control Panel Comprises Of: Standard Make On / Off Switch, Mains Indicator, Etc The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure 129 Crushing Value Test Apparatus: Consists Of M.S.Cylindrical Container 150 Mm ±0.5Mm Dia X 130Mm To 140Mm High With Base Plate 200 To 230 Mm. / Sqr X 6Mm Thick. A Plinger Of 148Mm ± 0.5Mm Dia X 100 To 115Mm High. Supplied Complete With Tamping Rod, 16Mm Dia X 600Mm Long, One End Rounded. And 1 No. Metal Measure 115 ± 0.5Mm Dia X 180 0.5Mm High. Consists Of Both End Open Cylinder, Base Plate, A Plunger 130 Digital Ph Meter: Measuring Range Resolution Accuracy Ph Range 0 To 14 Ph ( Min. ) 0.001 Ph ± 0.002 Ph Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Rel. Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Temperature Mtc -10.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Atc -5.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Compensation :Automatic And Manual Temperature Compensation Display : It Should Have Thin Film Transistor ( Tft ) Display Of More Than 4 Inch Color ( Blue / Red / Green / Yellow ) Display For Better Vision Of Readings With Clear And Well Arranged Icons Of Parameters Like Ph, Temperature, Mv, Date & Time Etc. Ingress Protection Level : It Should Be Ip54 Complied Protection Level. Power Requirements : It Should Be Operable With 9 -12V / 10W Dc Adapter.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
50.
Drinking Water Supply and Sanitation #10370616 Price Bid
tender for Etmadpur Nagar Palika Parishad Water Supply Scheme, Survey, Soil investigation, Design, Supply of all materials, labour, T&P etc. required for construction, erection, completion, testing & commissioning of water supply works such as RCC OHTs, ZPSs/CWR cum Pumping Station, Rising main, Feeder main, Distribution System, SCADA Room, Chlorination room, Meter Room, Panel Room, Boundary Wall & Site development works etc. and other appurtenant works including SCADA and Automation as per specifications in tender document for Etmadpur Nagar Palika Parishad Water Supply Scheme. The scope of work also includes trial run of 3 months & defect liability period of 12 months for Civil works & 24 months for E/M works after completion of successful trial run. All completed and commissioned workunderEtmadpur Nagar Palika Parishad Water Supply Scheme shall be hand over to Nagar Palika Parishad Etmadpur, District-Agra after 3 month successful trial run period. Sl. No. Item Description 1 Design, Supply of all materials, labour, T&P etc required for construction of Intz type RCC Over Head Tank including various works like - Ventilator and Water level indicator, Lightening conductor, C.I. D/F Verticle pipes (Inlet Pipe, Outlet Pipe, Overflow Pipe & Washout Pipe), duck foot bend, puddle collers and bell mouths, Sluice valve on inlet, outlet & washout pipe and Valve Chamber, Bye-pass arrangement of OHT, Flooring withApran & Drain( min.100 mm thick PCC of 1:2:4 & 100 mm thick RCC of 1:1.5:3 with nominal reinforcement), Floor level shall be 60 cm above the finished ground level of Campus, Three coat apex painting over one coat primer of approved colour after finishing of RCC surface with grinder, repair of pin holes, unevenness., Railings- G.I. Pipe railing around stair case (both sides), balcony & top dome periphery, S.S ladder from opening of top dome to bottom dome, Stair case (Seperate two column basedRCC staircase and 1 m wide balcony with arrangement of M.S Gate and Jali for 600 KL OHT & 1.0 m wide stair case around OHT column for 250 kl OHT), Food grade epoxy coating of FOSROC / Ciba-Geigy or reputated brand on inside surface area of water container after testing for water tightness, of capacity and staging mentioned as under:For bidding purpose, bearing capacity of soil shall be considered as 8t/sq.m. Working design shall be based on the SBC determind after soil investigation / 8 tonne/sqm.Note :- The bid price of Over Head Tanks is to be submitted considering net safe allowable bearing capacity as 8 t/m2, keeping the minimum foundation depth to be 2.5 m below existing ground level at the site of work. The successful bidder will be required to investigate the soil bearing capacity. If net safe allowable bearing capacity is found to be equivalent or more than 8 t/m2, the design of OHT will be based on 8 t/m2 capacity. However, in case the net safe allowable bearing capacity is found to be below 8 t/m2, then the design of OHT will be based on the actual bearing capacity. 2 OHT of 600 kl capacity, 24 m stagingNai Basti Water Supply Zone-I 3 OHT of 250 kl capacity, 24m stagingIOCL Water Supply Zone-III 4 Design, supply of all material, labour, T&P etc. required for construction of Ractangular, R.C.C Clear Water Reservoir cum pump house including various works like 1 m wide stair case with stainless steel hand railing to go inside reservoir, sump below the pump house area, stainless steel railing over the R.C.C slab of reservoir, Granular texture finish on exterior surface of pump house, gantry beam, food grade epoxy coating of FOSROC / Ciba-Geigy or reputated brand on inside surface area of water container after testing for water tightness, of capacity mentioned as under:Note : The bid prices of Clear Water Reservoir / Pumping Stations are to be submitted considering the depth of excavation may extend up to 6 m BGL. 5 750 KL Zonal Pumping Station for Zone- I, Zone- II& Zone-III 6 Construction of Meter Room as per type design (Size - 4m x 4m x 4m) including supply of all materials, labour, T&P etc. required for proper completion of the work as per the directions of Engineer-in- charge. 7 Construction of Panel Room as per type design (Size - 5m x 5m x 4 m) including supply of all materials, labour, T&P etc. required for proper completion of the work as per the directions of Engineer-in- charge. 8 Construction of Chlorinating Room as per type design (Size - 6m x 4m x 4 m) including supply of all materials, labour, T&P etc. required for proper completion of the work as per the directions of Engineer-in- charge. 9 Construction of SCADA Control Room as per type design (Size - 10m x 4m x 4 m) including supply of all materials, labour, T&P etc. required for proper completion of the work as per the directions of Engineer-in- charge. 10 Supply of ISI mark DI K-9 and K-7 S&S pipes (push on joints) of following class and diameters inclusive of jointing material (Rubber gasket of EPDM Quality, Bend, Tee etc.) including all statutary duties and taxes, third party inspection charges, transit insurance, freight, transportation to store/ site of work, unloading, stacking etc. complete as directed by Engineer –in-charge. 11 D.I. Pipe Class-K9 12 300 mm dia 13 200mm dia 14 250mm dia 15 150mm dia 16 D.I. Pipe Class-K7 17 200 mm dia 18 250 mm dia 19 300 mm dia 20 350 mm dia 21 400 mm dia 22 Supply of High Density Polyethelene Pipes (HDPE(PN-6)/PE-100), conforming to IS 4984 / 14151 / 12786 / 13488 in coils/ standard lengths with nesessary jointing material like electro-fusion coupler, electro-fusion Tee, electro-fusion band, electro-fusion reducer, flanged joint, including all statutary duties and taxes, third party inspection charges, transit insurance, freight, transportation to store/ site of work, unloading & stacking the same in covered shade duly protecting from sunrays & rains, etc. complete as directed by Engineer –in-charge. 23 110 mm (HDPE(PN-6)/PE-100) 24 140 mm (HDPE(PN-6)/PE-100) 25 160 mm (HDPE(PN-6)/PE-100) 26 Earth work in excavation for pipeline trenches in following type of soils with lead upto 50M, refilling the soil as required, including depositing in layers not exceeding 150mm, watering and compaction to 95% of the Standard Proctor density, level dressing, including supply of all labour, T&P etc. required for proper completion of the work. 27 In ordinary soil 28 0 -1.5 29 Carting, lowering, laying and jointing with SBR ruber gasketsD.I. K-7/ D.I. K-9 pipes of following dia & pressure including all specials, to site of work, lowering them into trenches, laying true to alignment and gradient, in proper position, cutting of pipes, making of joints including cost of jointing materials and rubber rings, labour, T&P, including hydraulic testing etc. complete as directed by Engineer in-charge. It includes provision for making of alignment on city roads, making trial pits to investigate location of various under grounds services like telephone cables, electric cable, existing pipe lines and sewer lines etc. arrangements for diversion of traffic and associated works etc. with supply of all necessary equipment, materials, labour and T&P etc. complete required for completion of work. The trenches shall be properly barricaded and fenced off wherever necessary. Red flags and caution boards during day and red lights during night shall be displayed so as to avoid any accidents. Note : Only SBR Rubber gaskets to be used as per IS-5382 and IS- 12820. 30 D.I. Pipe Class-K9/K7 31 400 mm dia 32 350 mm dia 33 300 mm dia 34 250mm dia 35 200mm dia 36 150mm dia 37 Carting, lowering, laying of following dia of HDPE Pipe (PN-6)/PE-100 of following dia and requisite specials to site of work, lowering them into trenches, laying true to alignment and gradient, in proper position, cutting of pipes, making of joints including cost of jointing materials and rubber rings, labour, T&P, including hydraulic testing etc. complete as directed by Engineer in-charge.It includes provision for making of alignment on city roads, making trial pits to investigate location of various under grounds services like telephone cables, electric cable, existing pipe lines and sewer lines etc. arrangements for diversion of traffic and associated works etc. with supply of all necessary equipment, materials, labour and T&P etc. complete required for completion of work.The trenches shall be properly barricaded and fenced off wherever necessary. Red flags and caution boards during day and red lights during night shall be displayed so as to avoid any accidents. Note: Jointing between HDPE pipes and specials shall be done as per the latest IS: 7634 part II. Only Bar coded electro-fusion machine (Automatically Readable) that can read the bar code of the fittings automatically shall be used for jointing of HDPE pipe/fittings. 38 110 mm (HDPE(PN-6)/PE-100) 39 140 mm (HDPE(PN-6)/PE-100) 40 160 mm (HDPE(PN-6)/PE-100) 41 Supply of following types of D.I. valves confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality, dismantling joint or mechanical joint, Nut & Bolts etc.) including all statutary duties and taxes, third party inspection charges, transit insurance, freight, transportation to store/ site of work, unloading, stacking etc. complete as directed by Engineer –in-charge. 42 Electrically Operated DI D/F Sluice valve, PN 1.6 43 300 mm dia 44 Manually Operated DI D/F Sluice valve, PN 1.6 as per IS 14840 : 2000 45 125 mm 46 150 mm 47 200 mm 48 250 mm 49 100mm dia for Scour valve 50 Air valves as per IS 14845 : 2000 including Sluice valve of Isolation 51 50 mm 52 80 mm 53 100 mm dia 54 Fire Hydrant as per IS Code 908 : 1975 55 80 mm 56 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge. 57 Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 58 125 mm dia 59 150mm dia 60 200 mm dia 61 250 mm dia 62 300 mm dia 63 100mm dia for Scour valve 64 Air valves as per IS 14845 : 2000 65 50mm to 80 mm dia 66 100 mm dia 67 Fire Hydrant as per IS Code 908 : 1975 68 80 mm dia 69 Supply of all materials, labour, T&P etc required for construction of brick masnory chambers for valves mentioned below. It includes excavation, 100 mm thick PCC, brick work in 1:6, 12 mm thick plaster in 1:4 and precast RCC (M20 grade) slab of thickness 200 mm as per the directions of Engineer-in- charge. 70 Sluice valve Chamber 71 100mm to 250 mm(Size-1.3mx1.4mx1.625m) 72 300mm dia to 400 mm dia (Size-1.5m x 1.7m x 2.1m 73 Air Valve Chamber (Size-0.8m x 0.8m x 0.8m) 74 Scour Valve Chamber (Size-1.3m x 1.4m x 1.625m) 75 Fire Hydrant Chamber 76 Dismantling of following type of road surfaces for laying of pipe line and house connection work including sorting out of serviceable materials and disposal of unserviceable materials including supply of all materials, labour, T&P etc. required for proper completion of the work.The rates of dismantling of roads as mentioned below for different types of roads include the cutting of existing thickness of road either single or multiple layer of roads. No extra payment shall be made to the contractor for cutting multiple layers of roads. 77 Bituminious Road 78 Cement Concrete Road 79 Interlocking Tiles Road 80 Brick on edge Road (BOE) 81 Re-instatement of following type of road surfaces after laying of pipe line and house connection work including supply of all materials, T&P etc. requuired for proper completion of the work as per direction of engineer-in-charge. The quantity of re-instatement has been increased by thirty percent in the view of additional damaged of dismantled road due to traffic / vehicle movement. 82 Bitumen roadTYPE AConstruction of bitumen road as per UPPWD specification including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-GSB G-1 (One coat) (90-40 mm) = 12.5 cmG -2 (one coat) (45-63 mm) = 7.5 cmG - 3 (one coat) (22.5 - 53 mm) = 7.5 cmBM (One coat)= 7.5 cmSDBC (One coat)= 2.5 cm 83 TYPE BConstruction of bitumen road as per UPPWD specification including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-Bitumen Road (SDBC + Tack coat)SDBC (One coat)= 2.5 cmTack coat with bituminous emulsion (MS)= 0.25 kg/sqm(30% consider for over dismantling of existing road) 84 Cement Concrete RoadConstruction of Cement Concrete road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:3:6 (cement, coarse sand & stone ballast of 20-40 mm) CC =100 mm, 1:1.5 :3 (cement, coarse sand & stone ballast of 16-20 mm) 85 C.C. Interlocking Tiles Road Type AConstruction of 80 mm tihck C.C. Interlocking Tile road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:4:8 (cement, coarse sand & stone ballast of 20-40 mm)Sand= 30mm to 50mm thick local sand lair for preparation of surfaceTiles = 50% new + 50% old 86 BOE (Brick on Edge) RoadConstruction of BOE road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-Ist class brick shall be used for reinstatement of BOE road.Brick = 50% new + 50% oldSand =15mm to 25mm thick local sand layer for preparation of surface 87 Providing and laying in position reinforced cement concrete (mix 1:2:4) for construction of thurst block at bends of feeder main, rising main & distribution system including batching, mixing, placing, vibrating, curing, formwork, finishing,including cost ofall material and labor, tools and plants required with transportation, loading, unloading,etc., complete for all leads and lifts etc required for proper completion of the work. 88 Providing H.Y.S.D steel reinforcement for reinforced cement concrete work including straightening, cutting, bending, hooking, placing in position, lapping and/ or welding wherever required, tying with binding wire and anchoring to the adjoining member wherever necessary as per design, including cost of materials and labor complete as per drawings. 89 Supply of all materials, labour, T&P etc. required for construction of following masonry type chambers as per type design. 90 Flow Meter Chambers 300mm dia to 400 mm dia (Size-1.7m x1.5m x 1.5m) 91 Disposal of surplus earth /unserviceable material, by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 92 Supply of all material including all statutary duties and taxes, third party inspection charges, transit insurance, freight, transportation to store/ site of work, unloading, laying and installing MS casing and carrier pipe crossing the National Highway and other roads for following sizeswith trenchless technology by to correct line and level. The rate to include construction and removal of any jacking platforms, boring and jacking of pipe, removal of excavated material, jointing of casing sections, radiographic testing of joints, internal coating of casing pipe, providing HDPE spacers between the casing and carrier pipes, excavation of jacking and receiving pits, MS shoring/ shuttering, dewatering, 35 cm thick protection brick wall surrounding the pits for protection from entry of waste water of nearby drains, rain water or unwanted material for safety purpose, and backfilling of same to 95% of the standard Proctor density, etc., as indicated in the drawings and specifications.It includes supply ofM.S. pipe with approved quality material from TATA/SAIL, epoxy coating in 300 micron thickness on both in and outside, welding material etc. After successful completion of laying, contractor shall fix blind plate at both the flanged ends of carrier pipe with rubber gasket, nut-bolts. After completion of aforesaid activities, contractor shall dismantle the shoring/shuttering taking all measures in consideration for safety, filling of earth in both pits in layers duly compacted up to 95% of density, filling of local sand in 1.0 m thick layer below the road surface. For safety caution/ diversion board with reflectors, caution tape, red blinker lights for night, hard baricading, traffic diversion, drainage diversion and pumping if required and other necessary arrangements for proper completion of the work up to the satisfaction of Engineer-in-charge. 93 For 300 mm dia of Feeder MainCasing Pipe - 500 mm dia MS Pipe (10 mm thick)Carrier Pipe - 300 mm dia MS Pipe (6 mm thick) 94 For 150mm dia of Rising Main (Zone-III):-Casing Pipe - 400 mm dia MS Pipe (10 mm thick)Carrier Pipe - 150 mm dia MS Pipe (6 mm thick) 95 Repairing / Shifting of existing water supply house connection due to falling in alignment of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 96 Provision for crossing of Nalas for laying of pipe line using HDPE casing pipe of suitable dia. and length including labour, T&P, necessary arrangement for diversion & pumping of water if required, barricading etc required for proper completion of work as per directions of engineer-in-charge. 97 0.3 - 0.5 m (Clear span) 98 0.5 - 1.0 m (Clear span) 99 1.0 - 1.5 m (Clear span) 100 1.5 - 2.0 m (Clear span) 101 Repairing of drain/ public ramp/other miscellaneous structures which are coming in alignment of pipe line and damaged during the laying of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 102 Brick masonry in cement mortar 1:4 103 12mm thick plaster in cement mortar 1:4 104 RCC M-20 (including MS work) 105 Providing and making water supply house connection from distribution pipe line of following diameters using 20 mm dia pipe (HDPE pipe (PE 100/ PN 12.5) below ground and medium class GI pipe above ground), saddle (electro-fusion tapping saddle for making connection with HDPE distribution pipeline, DI strap saddle, ferrule,for making connection with distribution pipeline other than HDPE), compression fittings (FTA, MTA etc.), ball valve, specials, including supply of all materials, labour, T&P etc. required for proper completion of the work. It also includes excavation, refilling of pit required for making house connection. 106 For 110 mm dia 107 For 125mm - 160mm dia 108 For 180 mm - 250mm dia 109 Construction of compound wall comprising of RCC Columns @ 3.0m c/c distance with beam at plinth and top, brick work in 1:4 of as per type design including supply of all material, labour, T& P etc complete. 110 Supply and fixing 3.60 m wide MS main gate & 1.0 m wide a wicket gate with RCC Columns as per type design & drawing including primer and painting, meterial, labour, T&P etc all complete. 111 Providing and laying in position reinforced cement concrete (mix 1:2:4) for construction of drain, size 250 mm x 250 mm, over PCC 1:4:8, including batching, mixing, placing, vibrating, curing, formwork, finishing,including cost ofall material and labor, tools and plants required with transportation, steel,loading, unloading,etc., complete for all leads and liftsand as per specifications etc required for proper completion of the work. 112 Construction of following types of Road/ flooring for development of CWR / OHT campus required as per site condition 113 C.C. Interlocking Tiles Road Construction of C.C. Interlocking Tile road including supply of all materials, labour, T&P etc. required for proper completion of work as per following thickness:-PCC = 100 mm,1:4:8 (cement, coarse sand & stone ballast of 20-40 mm)Sand= 50 mm thick local sand lair for preparation of surfaceTiles = 100% new Note : 100 mm thick rubber moulded interlocking tile shall be used for construction of interlocking tile road. 114 Repair of old OHT, Seepage, Water Proofing works, Indicator board, Lightening Consductor, Manhole etc. All tank related works as per direction of Engineer in Charge. 115 E&M Works 116 Providing, erecting, commissioning and giving test and trial of Clear Water VT pumps , water lubricated type and having following duty point,operating speed including providing and fixing ISMB grating etc, including Vertical hollow /solid shaft squirrel gauge induction motor (IS 325) of rating suitable for the above pumps continuous rated TEFC/ SPDP type with class F insulation for operation in AC 3-phase/ 50Hz (+/- 5%), 415 volt (+/- 10%)running with the speed of pump noted above and with inbuilt thrust bearing assembly capable of taking of the entire load and non reverse ratchet assembly etc complete. The motor rating noted above is the minimum and shall be such that it should never be overloaded when the pump works at the MWL condition and shall be 10% over and above the maximum HP absorbed by the pump. The motor offered should be energy efficient to have maximum efficiency at high powerfactor. Separate thrust bearing assembly could also be supplied to takeup the down load. 1500 RPM as per detailed specifications. 117 Etmadpur Zone-I :- Q= 1280 LPM, H=37m with suitable motor HP 118 Etmadpur Zone-II :- Q= 2500 LPM, H=34m, with suitable motor HP 119 Etmadpur Zone-III :- Q= 480 LPM, H=36m, with suitable motor HP 120 Providing, erecting, commissioning and giving test and trial of Horizontal split casing centrifugal booster pump motor set suited for variable frequency drive to regulate the discharge as per demand. 121 Etmadpur Zone-II Booster Pump : Q= 7700 LPM, H=5m, with suitable motor HP 122 Supply of double flangedDI short body pattern butterfly valvewith electrical actuator having integal starter and related hardware, including chair support, etc., conforming to IS 13095/BS EN 593, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . 123 Etmadpur Zone-I :- 150 mm 124 Etmadpur Zone-II :- 200 mm 125 Etmadpur Zone-III :- 100 mm 126 Etmadpur Zone-II Booster Pump : 400 mm 127 Supply of double flanged,DI, short body sluice valves with electrical actuator having integal starter and related hardware conforming to IS 14846, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications .Common Header in mm 128 Etmadpur Zone-I :- 200 mm 129 Etmadpur Zone-II :- 250 mm 130 Etmadpur Zone-III :- 150 mm 131 Etmadpur Zone-II Booster Pump : 400 mm 132 Supply of flanged DI Kinetic air valve including isolated sluice valve and related hardware conforming to IS 14845 / C512, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications .Common Header in mm 133 Etmadpur Zone-I :- 80 mm 134 Etmadpur Zone-II :- 80 mm 135 Etmadpur Zone-III :- 80 mm 136 Etmadpur Zone-II Booster Pump : 80 mm 137 Supply of dismantling joints and related hardware, including transportation to site, loading, unloading, storage, guarding, and issuance to works as per specifications . 138 Individual Header, mm 139 Etmadpur Zone-I :- 150 mm 140 Etmadpur Zone-II :- 200 mm 141 Etmadpur Zone-III :- 100 mm 142 Commonl Header, mm 143 Etmadpur Zone-I :- 200 mm 144 Etmadpur Zone-II :- 250 mm 145 Etmadpur Zone-III :- 150 mm 146 Etmadpur Zone-II Booster Pump : 400 mm 147 Providing and supplying ISI mark DI D/F reflux valves (non-returnvalves ) of following dia including all railway freight, inspection chargesunloding from railway wagon,loading into truck, transportation upto departmental stroes/ site,unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I(1984). 148 Etmadpur Zone-I :- 150 mm 149 Etmadpur Zone-II :- 200 mm 150 Etmadpur Zone-III :- 100 mm 151 Etmadpur Zone-II Booster Pump : 400 mm 152 Providing, errecting, commissioning and testing of non clog sump pump motor set havingpump discharge capacity of 30 LPS raw water with silt and mid at a total head of 30m with piping and other necessary arrangements. 153 Q=30LPS, H=30mwith suitable motor HP 154 Providing, fabricating, testing, transporting, and handling mild steelpipes and bendsas per IS 5504, IS 3589 and the specifications and drawings.The rate to include transportation of pipes to site, loading, unloading, storage, guarding, and issuance to works as per specifications. The rates shall be inclusive of Collecting materials from storage, loading, transporting, unloading, laying and jointing/welding pipe connections to correct line and level as per the specifications and drawings.The rate to includehoisting, lowering, marginal cutting wherever necessary, assembling, providing supports, thrust blocks, anchor blocks etc., as per specifications and drawings.The rate also includes testing of field joints . The rate shall also inclusive of internal and external epoxy coating and lining for corrosion protections as specified in the Specifications. 155 Indivisual Header, mm 156 Etmadpur Zone-I :- 150 mm 157 Etmadpur Zone-II :- 200 mm 158 Etmadpur Zone-III :- 100 mm 159 Commonl Header, mm 160 Etmadpur Zone-I :- 200 mm 161 Etmadpur Zone-II :- 250 mm 162 Etmadpur Zone-III :- 150 mm 163 Etmadpur Zone-II Booster Pump : 400 mm 164 Supply and errection of new Electrical Operated Crane (EOT) with chain pulley block complete3T and above 8 m upto 10 m span 165 Providing and supplying ISI mark Electromagnetic Flow meter of following dia including all railway freight, inspection charges unloading from railway wagon, loading into truck, transportation up to departmental stores / site, unloading, stacking etc. complete.Commonl Header 166 Etmadpur Zone-I :- 200 mm 167 Etmadpur Zone-II :- 250 mm 168 Etmadpur Zone-III :- 150 mm 169 Spetials, fittings, gauges, Saddle,Nuts Bolts washers etc, cost, Work includes making connection with existing pipes etc 170 Etmadpur Zone-I 171 Etmadpur Zone-II 172 Etmadpur Zone-III 173 Etmadpur Zone-II Booster Pump 174 SITC of SCADA Automation compatable Hypochloride dosing system -2 tanks of 1500 lt ,Diaphragm pump- 2 no,VFD , Control panel with all necessary allied works complete in all respect. 175 Designing, supplying, installing, commissioning and testing of pilot operated hydraulically controlled Flow limiting cum Altitute Control Valve for ESR Inlet with level controlling and flow limiting application which maintains aconstant downstream rate of flow. Also, closes on high reservoir level (FSL). opens when reservoir level drops with fixed set points inclusive of all accessories like integral Float arrrangement pressure gauge etc. complete as per specification. 176 Etmadpur Zone-I :- 200 mm 177 Etmadpur Zone-II :- 250 mm 178 Etmadpur Zone-III :- 150 mm 179 Electrical Works 180 Arrangement of 11 kV power suppy at Pumping Stationsincluding 11kV outdoor substation, pole structure, metering room, LA, CT, PT, disconnector, fuse, ACSR conductor, pin & disc insulators, indoor and outdoorCable Termination with heat Shrinkable jointing kits with all accessories including Lugs suitable as required as accepted standard complete, clamp & connectors with metering unit including steel structure as applicable as per approved single line diagram 181 Design, Supply, Installation, Testing and Commissioning of 11kV indoor HT Panel as per approved single line diagram pumping StationsIncommer Feeder- 01 No. - 3 O/C + 1 EF IDMT Characteristics Relays based Incommer control panel equiped with over current & earth fault relay with core balance C.T., master trip relay, instantaneous under voltage realy & Auxilliary relay etc.C.T.ratio suitable rating Dual core, Class-1 for measurement core & 5P10 for protection core & PT 11KV/110 VAC. KWH meter, power factor meter, frequency meter. Amp. meter 0-100A& volt meter 0 to12 KV. All relays required separately conventioal type 24 to 30 VDC, 110 VAC.Outgoing Feeder- 02 Nos. - Outgoing feeder control panel equiped withtriple pole 3 O/C + 1 E/F relay with IDMT & intantaneous characterisstics, mater trip relay & Auxilliary relay for Buchhloz alarm / trip, OTI alram / trip & WTI alram/trip, etc.C.T.ratio suitable rating, Class-1 for measurement core & 5P10 for protection core. 182 Design, Supply, Installation, Testing and Commissioning of 110V Ni-Cd battery, battery charger & DC distribution board and accessories suitable for above HT Panel. 183 Design, Supply, Installation, Testing and Commissioning of oil immersedOutdoor type Power distribution transformer 11/0.433 KV rating 100 KVA double wound with copperwinding, Level-2 or 3, vector group dyn 11, ONAN with offload tap changer operated for voltage variation + 5.0 % to - 10% at 07 tap positions in step of 2.5% complete with standard fitting & accessories complete in all respect. 184 Design, Supply, Installation, Testing and Commissioning of 415 V, Indoor Switch board PMCC panel (including 6 soft starters 2VFD, Lighting and Power arrangements) with neccessory and suitable rating of breaker, current transformer, ammeter, voltmeter, power factor meter, surg arrestor relay, UV / OV relay, frequency meter etc complete with all required material in all respect at Etmadpur CWR Pumping Station 185 Design, Supply, Installation, Testing and Commissioning of 415 V, APFC panel of suitable rating complete with required APFC relay and capacitor bank complete. 186 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - external lighting 187 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, utility sockets (3ph and 1ph.) and necessary accessories - internal lighting 188 Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories 189 Complete cabling system with LV power and control cables, cable trays, route marker, steel structure for cable trench, pipes and accessories 190 Complete cabling system with HV power and control cables, cable trays, route marker, steel structure for cable trench, pipes and accessories 191 Start stopPush Button Stations 192 AUTOMATION WORKS: Installation of Instrumentation and Control Equipment including, but not limited to, safe storage, protection, civil works, erection, installation, testing and commissioning required to complete the Works in all respects for the following equipment: 193 CE & UL approved manufacturers RTU/PLC suitable to communicate with GSM based modem unit with CPU and power supply with analog and digital parameter and features as specified for each tubewell & CWR to store and transmit data on GSM backbone. RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification sheet including Control panel with IP 54 protection industrial grade for all equipments (Separate for control (24 V) and power equipments) with CE / UL approved manufacturer’s Surge protector for Control Panel and CE / UL approved manufacturer’s 7 HMItouchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters as specified in tender technical specification sheet . 194 GSM/GPRS based wireless communicationmodem for RTU/PLC capable to transfer and gather data from remote sites to control stations, all accessories included with signal enhancer anteena made for pumping plant as specified in tender technical specification sheet. 195 CE / UL Certified 3 KVA UPS with batteries as per specification mentioned in technical bid documents. 196 CE/UL approved manufacturers Intelligent smart energy meter with memory real time clock and 1 serial port integrated with R.T.U. as per spec mentioned in technical bid documents for all pumps. 197 CE / UL approved manufacturer’s Radartype Level Transmitter for CWR as specified in tender technical specification sheet 198 CE / UL approved manufacturer’s Pressure Transmitter in main header line of Pump as per specifications specified in tender technical specification sheet. 199 CE/UL surge protector for control panel 200 CE/UL Certified 7 HMI Touchscreen suitable to commuticate with PLC / RTU for loac display and control of process parameter. 201 Completecontrol cable of all equipments at ZPS 202 Control Panel with IP54 protection Indsutrial grade for all equipmets seprate for control (24 Volt) and power equipment. 203 Complete instrumentation earthing system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories 204 Security Surveillance IP Camera with Recorer 205 Instaallation, Testing & Commissioning 206 Trial Run for 3 Month 207 Automation of OHT 208 CE / UL approved manufacturer’s Radartype Level Transmitter for Overhead tank as specified in tender technical specification sheet 209 Motor operated Actuator for OHT delivery Valves DN 450 mm or suitable to OHT outlet dia 210 Complete cabling for OHT including all power and control cable of all equipments at OHTs.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Uttar Pradesh View Result →
TenderDetail
Loading tenders