View Bid Results For Polyethylene Pipe Tenders

We found 4249 Bid Results related to polyethylene pipe tenders. You can find Contractor details who won polyethylene pipe tenders along with contract details in Bid awards announcements section.

Filters
Stage
3432
542
275
Tender Publishing Platform
1158
3091
State / UT
36
602
568
360
336
331
250
214
176
168
159
140
140
89
88
80
63
59
48
43
40
38
35
33
30
29
23
20
20
15
15
11
10
5
4
4
3
Contract Value
1095
1207
1580
350
Publish Date
13
3
1
0
0
Sector
32
1408
661
535
471
248
128
92
87
82
65
61
58
52
45
42
39
29
25
25
20
16
16
10
9
6
5
5
3
2
2
1
1
Ownership
6
1787
1405
885
163
7
2
Within keyword
Active filters:
Showing 1–50 of 4249 tenders matching your filters
3.
Defence #11465339 Price Bid
Tender for Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Not Exc 1.50 Sqm Each And Removing From Site Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc 1.50 Sqm Eachand N Exc 4 Sqm And Removing From Site Complete All As Specified And Directed.. , Demolition Of Brick Work Built In Cement Mortar Including All Quions, Arches, Pillars Etc But Excluding Ashlar Facings Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Complete All As Specified And Ditrected. , Dismantling Of Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Any Description Or Thickness In Floors, Aprons Etc. Complete All As Specified And Directed. , Demolition Of Cement Concrete (Reinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Reinforcement Cut As Required To Facilitate Demoltion Complete All As Specified And Directed. , Taking Down Cement Plaster On Brick Or Stone Wall Etc Including Racking Out Joints, Hacking For Key Scrubbing Down With Water Etc To Receive New Plaster Etc.Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 125 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc. Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 105 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc Complete All As Specified And Directed. , S & F For 35 Mm Thick Factory Made, 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebeated And Prepared To Received Glass, Gauzed, With Out Sash Bar Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitered Beads For Securing Glass Etc, Size Of Member Of Shutter As Per Specified In Ssr Part-I Section 8, Clause 8.24 (A) And For Door And Fixed With Chowkats, Chemically Pressure Treated Complete All As Specified And As Directed. , S&F For 35Mm Thick 2Nd Class Hard Wood Plain, Framed Pannelled Shutters (Two Panel) With Lock Rail And Panel Of 9Mm Bwp Commercial Ply Or 12Mm Veneered Particle Board Wiyh Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per (Is : 1003 Part-I , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And As Directed. , S&F Powder Coated Aluminium Frame Work (Min Thickness Of Powder Coating 50 Micron) For Doors, Windows, Ventiltors And Partition, (Sliding/Openable/Fix Doors, Windows, Ventilator), Etc With One, Two Or More Rebates (Reqd As Per Site), Section Weighing Not Less Than 0.55 Kg/M, Including Joining Cleat For Fixing With Dash Fasteners Of Required Dia And Size, Incl Filling Up Gaps At Junctions, Ie Top, Bottoms And Sides Etc Complete All As Sspecified And Directed.. , S&Fpowder Coated Aluminium Window And Ventilator Shutters, Sliding/Openable/Fixed (As Per Required At Site) Type Without Sash Bar, Alu Section Weighing 0.55 Kg/M, Including Necessary Locking Arrangement, Guide Wheels, Joining Cleats, Glazing Clips Rubber Packing Anodised Alu Snap Beading Screws Etc Complete All As Specified And Directed. , S&F For Sheet Glass Palin/Coloured (As Per Directed By Engr-In-Charge) 3Mm / 5 Mm Thick Best Quality And Glazing With Rubber Packing, Screws Or Glass Putty In Squares Exc 0.5 Sqm Each Pane Complete All As Specified And Directed. , S & F For Stainless Steel Wire Cloth Of 0.36Mm Dia Wire And Average Width Of Aperture 1.40Mm & Fixed With Tacks Or Screws, Wire Staples, Etc Complete All As Specified And Directed. , S&F Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube With Wooden Grain Printed Pvc Sheet Used Inserted Of Plain Colour Pvc Sheet & Edges Will Be Painted To Match With Printed Sheet Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail. Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Complete All As Specified And Directed. , S&F 100 Mm Long Mild Steel Butt Hinges, Cold Rolled, Medium Weight Complete All As Specified And Directed. , S&F For 125Mm Long Anodised Aluminium Barrel Tower Bolt Of Extruded Section Complete All As Specified And Directed. , S&F 150Mm Long Anodised Aluminium Handles, Cast Type Complete All As Specified And Directed. , S&F300mm Long Aluminium Alloy, Anodized Sliding Door Bolt With Hasp Stapple ( Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy And Fixed Complete All As Specified And Directed. , S&F For 20 To 25 Mm Dia Stainless Steel Drapery Curtain Rod With Brass /Nickel Chrom Polish / Designer Lattos And Brackets Complete All As Specified And Approved By Engr-In-Charge Including Taking Out Old Pelmet With Curtain Rods Complete All As Specified And Directed. , S&F 300 Mm Long Mild Steel Ordinary Rat Tail Rod Pattern Spring Including Roller And Roller Plate Complete All As Specified And Directed. , S& F Floor Door Stopper Of Aluminium Alloy Body And Tongue ,Anodised ,With Hard Drawn Steel Spring ,Fixed In Floor Overall Length Of Cover Plate 140Mm Complete All As Specified And Directed. , S & F For Pvc And Cupboard Shelf/ Partition/ Frame / Shutter Of 18Mm Thick Side Of Panel Externally Impact Perfact Finish To The Shutter And Joined Together With Solvent Cement Adhesive 8Mm Thick (4Mmx2)X12mm Wide Pvc Sheet Is Used As Gap Insert For Top & Bottom Rail, 18Mm X 1Mm Pvc Edge Lipping Is Done On Top & Bottom Side Using Pvc Solvent Cement Adhesive, Incl Hasp And Stable For Locking Purpose, Etc Complete As Per Direction Of Engr-In-Charge, Manufactures Specification And Drawing Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc. 6M Mean Radius Built In Cement Mortor 1:6., Etc Complete All As Specified And Directed. , M & L For Brick Work With Sub Class B Modular Bricks, Straight Or Curved On Plan To Any Radius Built In Cm 1:4 In Half Brick Thick Walls Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick In Cm 1:4 On Other Than Fair Faces Of Brick Or Concrete Surface With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed.(Note:- Liquid Water Proofing Compound To Be Measured Paid Separately) , M&L For Rendering 5Mm Thick In Ceiling Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , Supply Only Integral Water Proofing Compound Complete All As Specified And Directed. , M & L For Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , M&L Plain Cement Concrete 1:4:8, Type D2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor Complete All As Specified And Directed . , M & L 25Mm Thick Cement Concrete Type B-0, 1:2:4 (Using 12.5 Mm Graded Aggregate) For Levelling Course In Floors Complete All As Specified And Directed. , M&L For Scratch Free Vitrified Light Shade Floor Tiles 10Mm Thick (Square Or Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm ,In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With And Including 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directed. , All As Per Item No 35 Above But As In Skirting/ Dado Etc With And Including 10Mm Thik Backing Coat In Cement Mortar 1:4 An Wall Complete All As Specified And Directed. , M & L For Non Skid Joint Free Coloured Ceramic Floor Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exc 0.11 Sqm But N Exc 0.18 Sqm,In Floor Etc Set & Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With 15Mm Thick Screed Bed Or Bedding Layer In Cm (1:6) Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Wall Tiles (Textured And Design As Required) In Vertical Surface 450X300x7mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Rendering In 1:4 Cm Complete All As Specified And Directed. , M & L For Applying Two Coat Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. , M & L For Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Cement Primer And Over A Coat Of 2 To 3Mm Thick Wall Care Putty Complete All As Specified And Directed. , M & L For Preparation Of Newly Plastered Surfaces Of Walls And Applying Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gms/Litre, Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per Manufacturers Specification. Two Or More Coats On New Work Over A Coat Of Wall Care Putty 3Mm Thick Complete All As Specified And Directed. , Material And Labour For Apply Two Coats Of Anti Fungal Weather Coat Acrylic Emulsion Paint Over A Coat Of Primer On New Surfaces Including 2 -3 Mm Thick Wall Putty, Complete All As Specified And Directed. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Claim On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M & L For Preparing New Plastered Surface On Ceiling And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surface Including Complete Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Applying Two Coat Of Oil Bound Distemper On Walls Over 2Mm Thick Plaster Of Paris Putty As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surface Including Complete Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) On Walls Over 2Mm Thick Plaster Of Paris Putty As Specified And Directed By Engr-In-Charge. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Claim On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M&L For Three Coat Of White Wash On Old Surface On Ceiling Including Preparation Of Surface Complete All As Specified And Directed. , M & L For Machine Cut Kota Stone Slab Flooring 20 To 25Mm Thick (Size Not Less Than 550Mm X 550Mm) Laid & Jointed With Grey Cement Mixed With Pigment To Match The Shade Of Slab Including Rubbing And Mirror Polishing Finished Laid Over And Including 20Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And As Directed. , M & L For Machine Cut Kota Stone Slab Flooring 18 To 20Mm Thick As In Riser Of Step, Dado And Skirting Over And Including 10Mm Thick 1:4 Cm Backing Coat On Vertical Surface Of Wall With Rubbing And Mirror Polishing Finished Complete All As Specified And As Directed. , M&L Plain Cement Concrete 1:3:6, Type B1( Using 20Mm Graded Stone Aggregate) 75Mm Thick As In Plinth Protection Complete All As Specified And Directed . , Demolition Of Cement Or Lime Concret In Any Despription Along With Tarfelt Treatment In Sunken Portion / Roof And Cement Mortar Bedding From Roof Removal Rubbish Out Side Md Land Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:2:4 Type B-0 Using 12.5Mm Graded Crushed Stone Aggregate As In Sunken Portion, Subbase, Etc Complete All As Specified And As Directed. , M&L For Rendering 10Mm Thick In Cm 1:4 On Roof Suraces With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Water Proofing Treatment To Sunken Portition / Roof Etc. In Following Sequence:- (I) Properly Cleaning And Drying The Surface (Ii) Applying A Coat Of Bitumen Primer @ 1.2Kg/Sqm And Primer Shall Be Allowed To Dry Over Night. (Iii) Laying App Based Modified Water Proofing Membrane Of Weight Not Less Than 3Kg Per Sqm And Thickness Not Less Than 3 Mm, With 100Mm Overlaps, Sealed And Bonded To The Surface By Torchon Method (Iv) Applying Two Coat Of Bituminous Based Aluminum Painting @ 0.15 Kg/Sqm Each Coat On Water Proofing Treatment With Preparation Of Surfaces Complete All As Specified And Directed. , S&F Vitreous China Wash Down Water Closet Pan Semi Pedestal Pattern(Anglo Indian Type), White (Excluding Fixing Bolts, Flushing Cistern And Flush Pipe(Excluding Flushing Cistern And Flush Pipes) Including Connection To Trap And To Flush Pipe Etc And Lime Concrete Bedding Including P Or S Trap Complete All As Specified And Directed. , M&L In Repairs Pvc Valve Less,Syphonic Action Type Flushing Cistern,Low Level ,White With Inlet Ball Valve,Float And Handle Including Brackets And Connection To Pipe And Fixing Of Chain And Pull Or Lever If Any Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back, Size 550X400 Mm Including Bracket, Taps ,Waste Pipes , Chain And Plug Etc Complete All As Specified And Directed. , S & F In Repairs Pvc (Swr) Nani Trap / Floor Trap Plain Or Multi With Stainless Steel Grating Incl Joining To Waste Pipe With Solvent Cement Joint Dia Of Outlet 75Mm Bore Complete All As Specified And As Directed. , S&F In Repair 110Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S&F In Repair 75Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S & F In Repair 110 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repair 75 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repairs 110Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , S & F In Repairs 75Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , M & L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Not Exc 10Cm Girth Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Dia Old Serviceable / Unserviceable Steel Tubing Any Grade And Connections Cleaning For Re-Fixing Or Removal To Store Complete All As Specified And Directed . , All As Per Item No 65 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F Steel Tubing Medium Grade ,Galvanized With All Fitting Such As Bend ,Elbow, Socket,Tees,And Fixed Complete To Wall Or In Ceiling Or In Floors Including Cutting Threading And Making Forged Bends On Pipes Ms Hooks Etc ,For 15Mm Bore Pipes Complete All As Specified And As Directed. , All As Per Item No 67 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F In Repair For 15Mm Bore Bib Taps Chromium Plated With Crutch Or Butterfly Handle ,Screwed Down , Screwed For Iron Pipes Or Brass Ferrule Complete All As Specified And Directed. , S&F In Repair Cp Angle Stop Cock Of 15Mm Bore Screwed Down For High Pressure With Crutch Or Butter Fly Handle ,Screwed Both End For Iron Pipes Complete All As Specified And Directed.. , S&F In Repair Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe 15Mm Bore Complete All As Specified And As Directed. , S&Fixed In Repair 125 Mm Size Chromium Plated Shower Rose With Siwel Joint Suitable For 15 Mm Bore Gi Pipes Complete All As Specified And Directed. , S&F In Repairs Pvc Connection 15Mm Size With Ptmt Nuts Of Length 450 Mm Long Complete All As Specified And As Directed. , S& F In Repair Rotational Moulded Polyethylene Water Storage Tank 1000 Liters Capacity (Cylidrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Incl Brass Float Valve 20Mm Dia And Dismantling Water Tank Complete All As Specified And Directed. , S & F In Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats (Minimum Weight 300 Grams) Complete All As Specified And Directed. , S&F In Repair Stop Valves Fancy Type Chromium Plated With Long Shanks Fixed With 15 Mm Dia Bore Pipes Complete All As Specified And As Directed. , M & L High Strength Steel Deformed Tmt Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping Columns,Hookings Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.90 Mm Dia Or Securing With Clips, Etc Complete All As Specified And Directed. , M & L For Formwork Fair And Finished Surfaces To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Bands, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Complete All As Specified And Directed , M&L Reinforced Cement Concrete M-25 Using 20 Mm Graded Stone Aggr As In Beams, Bands, Cantilvers, Bressummers, Linters, Chajjas, Etc Over 1.5M Span Etc Complete All As Specified And Directed , Demolition And Breaking Up 150Mm Dia Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete ) And Set In Cement Mortar Complete All As Specified And Directed. , M&L For Concrete Bed To Drain Pipes Including Packing Under, And Haunching Against The Sides Of 150 Mm Bore Pipes In Cement Concrete 1:3:6 Type C-2 ( Using 40 Mm Graded Stone Aggregate) After They Are Laid And Tested Complete All As Specified And Directed. , M&L For 150 Mm Bore Salt Glazed Stone Were (Sgsw) Drain Pipe Grade A Laid To Slope In Tranches And Jointed In Cement Mortar (1:1) Including Necessary Testing For Ensuring Teak Proofing Complete All As Specified And Directed. , M & L For Cutting Into Existing Manhole For Connecting New Drains And Making Good To Pipes And Rendering Cutting Out Existing Benching For And Forming Branching For And Forming Branch Channel (1/2 Round Or ¼ Section ) In Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate Smooth Finished And Reforming Benching As Specified And Directed For 150Mm Dia Of Pipe Complete All As Specified And Directed. , M&L Plain Cement Concrete 1:4:8, Type B2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor Complete All As Specified And Directed . , M&L For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block (Glossy Finish) Of M-35 Gde Of Approved Shape, Size And Colour Conferming To Is 15658-2006 And Laid Over And Including 25Mm Thick Grid Cushion Complete All As Specified And Directed. , S & F For Precast Cement Concrete Type B-1 (1:2:4) (20Mm Graded Stone Aggregate) As In Kerb And Edging To Road And Footpath Etc, Including Chamfered, Weathering, Throating Etc And Setting In Cm (1:4) Complete All As Specified And Directed. , S & F In Repairs Ms Framed Work As In Doors Or Gates Of Angle Iron, Door Frame Or Other Section With Gusset Plate, Rails, Braces And Stair Case Etc Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering Etc, To Prepared For Hanging Or Sliding With Including Either Hooks And Hinges Also Fastening Grills, Grating, Hold Fast Of Doors And Windows Chowkat Etc, With Ends Of Bars Shouldered And Or Riveted, Or Forget Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework Of Water Tanksand Fixing And Similar Work Confirming To Fe 290 Gde E-165 Complete All As Specified And As Directed. , M&L For Preparation Of New Steel Surfaces Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , Excavation In Trenches N.Exc 1.5M Wide And N.Exc 1.5M In Depth For Foundation Or Etc, For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc N.Exc 10 Sqm On Plan And N.Exc 1.5M In Depth And Getting Out In Soft/Loose Soil, Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:4:8 Type D2, Using 40Mm Graded Stone Aggregate, As In Foundation Filing, And Mass Concrete , Etc Complete All As Specified And Directed , Removing Excavated Material (Soil) To A Distance Not. Exc. 50 Mtr And Depositing Where Directed At A Level Nexc 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. , M & L Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate) As In Coping, Bearing Course, Manhole/ Drain Channels Etc In Including Necessary Formwork Complete All As Specified And Directed. , M&L For Cement Concrete 1:3:6 Type C-1 Using 20 Mm Graded Stone Aggregatre As In Surface Channels And Drains Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel Exc 30 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms Moulds, Mitred/Stopped Ends Etc Complete All As Specified And Directed. , M & L For Preparing New Plastered Surface On Walls And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M & L 20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite With Providing 15Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And As Directed.. , S&F In Repairs Standard Size Ewc White Colour With P/S Trap White Coloured With And Including Pvc White Coloured Seat Cover Including All And Connecting To Flushing Cistern Complete All As Specified And Directed. , Supply And Fixing Health Faucet Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete All As Specified And Directed. , S & F In Repair Soap Dish With Including Chromium Plated Brass Screws And Wooden/Plastic Cleats ( Minimum Weight 105Gm). Complete All As Specified And Directed. , S & F In Repair Tubular Towel Rail 20Mm Dia 600Mm Long Of Brass Chromium Plated Fixed With Including Chromium Plated Brass Screws And Wooden/Plastic Cleats Complete All As Specified And Directed. , Dismantling Of Asbestos Cement (Corrugated, Semicorrugated, Etc.) Sheets In Roof Covering Incl Ridges Etc Complete All As Specified And Directed. , S&F 0.50Mm Thick (Total Coated Thickness) Pre-Colour, Pre-Profiled Galvalume Sheets Of Required Colour And Design Having Tensile Strength Of 550 Mpa As In Roof, Wall Cladding, North Light Curves, Fixed With Zinc Coated Self Drilling Fastener Including Epdm Washer Complete Laid With One Corrugation Side Laps And Min 150Mm End Lap Laid To Slope All As Per Manufacturer/Profile Maker Instruction Complete All As Specified And Directed. , S & F Pre - Painted Galvalume Aluminium Zinc Coating Plain Sheeting 0.50 Mm Thick Of Required Colour And Shape Having Tensile Strength Of 550 Mpa As In Ridge Valley,Gutters,Barge Board,Roof Covering / Cladding To Wall, Fixed With Self Tapping Screwes Complete All As Specified And Directed. , S & F 600Mm X 450Mm Size Beveled Edge Mirror Of 6Mm Thick Selected Quality Mounted On 6Mm Thick Plywood With Chromium Plated Screws With Washer Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M )Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M )Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Jammu And Kashmir View Result →
4.
New and Renewable Energy #11454900 AOC
Bids Are invited for Title1 - Wall painting with acrylic emulsion paint , Title2 - Providing and applying white cement based , Title3 - Finishing walls with Acrylic Smooth exterior paint , Title4 - 15 mm cement plaster , Title5 - Neat cement punning , Title6 - Providing and fixing bright finished brass hanging type floor door stopper , Title7 - Painting with synthetic enamel , Title8 - Applying one coat of water thinnable cement primer , Title9 - 6mm cement plaster , Title10 - Providing and fixing Ist quality ceramic glazed wall tiles , Title11 - White washing with lime , Title12 - Clearing and stripping the site , Title13 - Supply and transport of earth , Title14 - Earth work in excavation , Title15 - Providing and laying in position specified grade of PCC , Title16 - Providing and laying in position specified grade of reinforced cement concrete , Title17 - Steel reinforcement , Title18 - Centering and shuttering , Title19 - Structural steel work riveted , Title20 - Providing and fixing ISI marked flush door shutters , Title21 - Providing and fixing concertina coil fencing , Title22 - With GI barbed wire , Title23 - Providing and fixing GI chain link fabric , Title24 - Removal of wet dry sludge , Title25 - Removal of existing damaged glass , Title26 - Welding by gas or electric plant , Title27 - Removal of existing damaged door , Title28 - Dismantling colour coated roofing Sheets , Title29 - Rectifying all defects causing leakage in pre coated iron profile roofing sheets , Title30 - Providing and fixing precoated galvanised iron profile sheets , Title31 - Demolishing RCC work by mechanical means , Title32 - Supplying and applying bituminous solution primer , Title33 - Random rubble masonry , Title34 - Brick work with common Fly ash bricks , Title35 - Providing and injecting chemical emulsion , Title36 - Half brick masonry , Title37 - Providing and fixing white vitreous china pedestal type water closet , Title38 - Providing and fixing wash basin , Title39 - Providing and fixing beveled edge mirror , Title40 - Providing and fixing CP brass bib cock , Title41 - Providing and fixing CP brass stop cock , Title42 - Providing and fixing water closet squatting pan , Title43 - Providing and laying Ceramic glazed floor tiles , Title44 - Providing and fixing on wall face un plasticised Rigid PVC SWR pipes , Title45 - Providing and placing on terrace polyethylene water storage tank , Title46 - Providing and fixing inposition collapsible steel shutters , Title47 - Providing and fixing PTMT pillar cock , Title48 - Providing and laying Bituminous concrete , Title49 - Sub-base course , Title50 - Base course , Title51 - Providing and fixing brass 100mm mortise latch an dlock with 6 levers , Title52 - Developing lawn , Title53 - 30 mm thick factory made Polyvinyl Chloride , Title54 - Providing and fixing GI chain link fabric , Title55 - Do GI Pipe 25m dia , Title56 - 32 mm dia nominal bore , Title57 - 50 mm dia nominal bore , Title58 - Providing and fixing false ceiling , Title59 - Supplying and filling in plinth , Title60 - Providing and laying dampproof course , Title61 - Finishing with Epoxy paint , Title62 - Providing fixing glass panes , Title63 - Providing and laying vitrified floor tiles , Title64 - Providing and laying Polished Granite stone , Title65 - Providing and fixing Stainless Steel , Title66 - Providing and fixing Stainless Steel 24 inch Towel Rod , Title67 - Providing and fixing of Overhead Shower , Title68 - Providing and fixing of Shower Arm Casted Chrome , Title69 - Providing and fixing with all fittings of Angle Cock , Title70 - Providing and fixing with all fitting of two way bib Cock , Title71 - Providing and fixing with all fitting of Float valve , Title72 - Constructing masonry Chamber , Title73 - Dry stone pitching , Title74 - Providing and fixing gun metal gate valve , Title75 - Providing and laying 60mm thick faciory made cement concrete interlocking paver block Total Quantity : 14934
Contract Date: Ref. Documents Contract Value : 34.73 Lakh
Boards / Undertakings / PSU No of Bidders 2
Andhra Pradesh View Result →
5.
Public Administrative Department #11441629 Price Bid
Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Suri-I Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 5
West Bengal View Result →
6.
Public Administrative Department #11437950 Technical Bid
Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Rajnagar Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
West Bengal View Result →
Contract Date: Ref. Documents Contract Value : 1.77 Lakh
Government Departments No of Bidders 3
Contract Date: Ref. Documents Contract Value : 88,400
Government Departments No of Bidders 3
Jammu and Kashmir View Result →
9.
Environment and Forests #11420190 Technical Bid
Tender for Plant Preparation, Vermicompost Preparation And Purchase Of Other Materials For Plantations. , Fertile Soil With Sufficient Amount Of Humus (Fertile Soil Without Harmful Waste And Pebbles), Ripe Cow Dung (Two Years Old Rotten Manure With Less Than 15 Percent Moisture And Free From Waste Material And Pebbles), Sand (Medium Sized Granular And Free From Soil, Dust And Pebbles), Polythene Bag (Size 15X25 Black Color 300 Gauge), Green. Net 75%¼100% Uv Protection Green Shade Net Block Upto 125 Gsm Mono Mono-High Density Polyethylene Green),Mulchin Sheet Natural Compound/Black Color Size 10.25X1.25 Micron 500 Gauge) Per Kg. , Legum Pipe (1 Inch 100 Feet Isi Mark Mesh Coating), Printed Bag For Vermicompost (Capacity 50 Kg). Purchase Of Plant Dumping Trolley 2 Tyre, Plant Dumping Trolley 1 Tyre, Plant Preparation In Nurseries, Vermi Compost Preparation And Other Materials. , Fertile Soil With Sufficient Amount Of Humus (Fertile Soil Without Harmful Waste And Pebbles), Ripe Cow Dung (Two Years Old Rotten Manure With Less Than 15 Percent Moisture And Free From Waste Material And Pebbles), Sand (Medium Sized Granular And Free From Soil, Dust And Pebbles), Polythene Bag (Size 15X25 Black Color 300 Gauge), Green. Net 75%¼100% Uv Protection Green Shade Net Block Upto 125 Gsm Mono Mono-High Density Polyethylene Green),Mulchin Sheet Natural Compound/Black Color Size 10.25X1.25 Micron 500 Gauge) Per Kg. , Legum Pipe (1 Inch 100 Feet Isi Mark Mesh Coating), Printed Bag For Vermicompost (Capacity 50 Kg). , Plant Dumping Trolley 2 Tire , Plant Dumping Trolley 1 Tire
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
Madhya Pradesh View Result →
11.
Defence #11409082 Technical Bid
Tender for Demolition Of Reinforced Cement Concrete Cover Slab And Removing The Debris To A Distance Not Exc 500M As Directed. , Material And Labour For Precast Cement Concrete B1, Type 1:2:4 Using 20 Mm Graded Stone Aggregate For Cover Slab Set In Cm 1:4 Including Necessary Formwork Complete All As Specified. , Material And Labour For Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length Bend To Shape Required Including Cranking Bending Spirally For Hopping For Columns Hooking Ends And Binding With And Clips Complete All As Specified And Directed. , Demolition Of Stone /Boulder Masonry, Built In Cement Mortar Including All Quoins, Arches, Pillars, Etc., But Excluding Ashlar Facings, Dressed Stonework And Precast Concrete Articles. , Pre - Cast Cement Concrete 1:3:6 Type C-1, (20Mm Graded Stone Aggregate) Block Masonry With Solid Blocks Built In Cement Mortar 1:4 , Demolition Of Un-Reinforced Cement Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided For. , Material And Labour For Plain Cement Concrete Type C2 1:3:6 (40Cm Graded Aggregate) As In Foundation Of Drains Complete All As Directed , Material And Labour For Plain Cement Concrete Type B0 1:2:4 (12.5Mm Graded Aggregate) As In Haunching Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Material And Labour For Plain Cement Concrete Type B1 1:2:4 (20 Mm Graded Aggregate) As In Coping Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Rendering 15 Mm Thick In Cement Mortar (1:4) On Brick Surface And Finishing Plastered Surface With Using Extra Cement, Complete All As Specified And Directed. , Material And Labour For Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Concrete Using Extra Cement Including Form Moulds Mitered/Stopped Ends Etc , Material And Labour For Extra For Forming Fair Finished Drain Or Channel For Additional 25 Mm Inner Girth Over Or Under 30 Cm In Cement Concrete Using Extra Cement Including Form Moulds Mitered/Stopped Ends Etc All As Specified , Material And Labour For Plain Cement Concrete 1:3:6 Type C2 (Using 40 Mm Graded Granite Stone Aggregate) In Concrete Bed To Drain Pipes Including Packing Under And Haunching Against The Sides Of Pipes After They Are Laid And Tested For Pipes Of 300 Mm Bore. , Supply And Fix Reinforced Cement Concrete Class Np 2, 300 Mm Bore Pipes Laid And Jointed Complete With Collars. , Material And Labour Demolition Of Cement Concrete Of Any Description And In Any Position Not Otherwise Specially Provided For And Demolition Procedure Like Cutting Out Of Full Depth Of (100 To 450Mm) Existing Damaged/Shattered Concrete Slab With Diamond Wheel Cutter Or Carbide Tipped Wheel Saw To Provide A Pressure Relief Cut Within The Patch Area Prior To Boundary Sawing, In Proper Rectangular, Square Or Triangular Shape Perimeter Without Disturbing Adjacent Slab, After The Repair Area Is Isolated By Full - Depth Saw Cuts, Making Small Pieces, Lift And Removing The Deteriorated Concrete Slab Pieces From Its Position And Removing To A Distance Exc 1.5 Km But Not Exceeding 5 Km And Depositing Where Directed Complete All As Specified. , Providing And Laying Dry Lean Concrete (Dlc) 100Mm Thick Of Aggregate Gradation As Per Table 1 Of Sp 49:2014 Having 7 Days Average Compressive Strength Not Less Than 7 Mpa. Minimum Cement Content Not Less Than 140 Kg/Cum Dlc Mixed In Batching Plant, Transported To Site And Laid By Electronic Sensor Paver Including Spreading And Compacting Using High Amplitude Tamping Bars Of Paver (Initial Compaction) Further By Double Drum Smooth Wheeled Vibratory Rollers With 80-100 Kn Static Weight To Achieve Minimum Dry Density, Necessary Finishing Etc Complete All As Per Specified And Tolerances To Be As Per Table 900-1 Of Morth Specifications For Road And Bridge Work 2013. , Supplying And Laying 400 Micron Thick Hdpe Sheet (Virgin Quality|) Water Proof, Wrinkle Free Without Puncture Having Minimum Weight 390Gm/Sqm Over Tack Coat/Sand Cushion As Specified In The Design With Overlap Between Adjacent Strips And At Transverse Joints As Minimum 300Mm Complete All As Specified And As Directed By Engr-In-Charge. Note: Sand Layer Shall Be Measured And Paid Separately And Overlapping Of Hdpe Sheet Shall Be Included In This Unit Rate. , Material And Labour For 10 Mm Thick Sand Cushion With Clean River Sand Duly Clear Of Residual, Organic And Deleterious Materials Spread Evenly To Uniform Thickness Laid Over Dlc Layer As Specified And Directed. (No Additional I Amount To Be Paid For Overlap) , Pavement Quality Concrete (Pqc) Of Minimum 28 Days Field Flexural Strength Of 45Kg/ Sqcm Or 4.5 Mpa, Aggregate Gradation As Per Table 3 Of Irc 15-2017, Coarse Aggregate Of Clean, Hard Strong, Dense, Non-Porous And Durable Pieces Of Crushed Stone Or Gravel, Fine Aggregates Of Clean Natural Sand Or Crushed Stone Sand Or Combination Of Both Using Minimum 360 Kg/Cum Of Cement With Non-Circular, Virgin Synthetic Fibre Of 12-18 Mm Length, Specific Gravity 1.34 To 1.39. Uv Stable, Alkali Resistant, With Equivalent Dia 15-40 Micron, Minimum Melting Temperature As 240 C And Minimum Tensile Strength Of 300 Mpa And At The Rate Specified By The Manufacturer. Pqc Laid, Spread And Compacted With Slip-Form Paver Of Minimum 7.50 M Width, Including Curing And Tinning By Texturing Cum Curing Machine Complete All As Per Specified And Directed. Required Surface Texturing To Be Done As Specified In Clause 10.1, 14 And Table 9 Of Irc 15-2017. , Supply Only Polyester Triangular/ Non Circular Synthetic Fiber Reinforcement All As Manufacturer Instructions Complete All As Specified And Directed. , Material And Labour For Cutting Of Construction Joints 25 Mm Deep And 10 Mm Wide By Early Entry Saw Cut Using Diamond Bicutter Of Appropriate Size, Straight And Smooth Edges. Joint Cleaned Thoroughly With Application Of Compressed Air. Joint Shall Be Made Dry, Vacuum Cleaned And Free Of Dirt, Oil, Vegetation And Other Debris Application Of Two Coats Of Primer With Thin Brush By Forward And Backward Movement At An Interval Of 30 Minutes Before Placing The Backup Rod And Pouring The Sealant. Placing Of Closed Cell Medium Density, Crossed Linked Polyethylene Foam Backup Rod Of 12 Mm Dia, Application Of Bond Breaker Tape On Top Of Back Up Rod For Complete Width Of The Joint And Filled With Polyurethane Based Sealant Complying With Bs-5212, Bs 4254 And En- 141875-2003 With Minimum Movement Accommodation Factor (Maf) Of +I- 30% Having Minimum 10 Year Performance Guarantee, Applying Masked Tape On The Edges Of Joints And Removing The Masking Tape After Filling Of Sealant As Per The Method Specified By The Manufacturer Complete As Specified And Directed , Material And Labour For Forming 25 Mm Width Expansion Joint In Concrete Slab For Full Depth Of Poc. Early Entry Saw And Subsequent Cutting By Using Diamond Bit Cutter O Appropriate Size. Straight And Smooth Edges. Join Cleaned Thoroughly With Application Of Compressed Air. Joint Shall Be Made Dry, Vacuum Cleaned And Free Of Dirt, Oil, Vegetation And Other Debris. The Join Then Filled With Pre-Molded 25 Mm Thick Compressible Polyethylene Closed Cell Type Filler Board As Specified Thereafter Application Of Two Coats Of Primer With Thin Brush By Forward And Backward Movement At An Interval Of 30 Minutes Before Placing The Backup Rod And Pouring The Sealant Placing Of Closed Cell Medium Density, Crossed Linked Polyethylene Foam Backup Rod Of 30 Mm Dia, Over Filler Board And Filled With Polyurethane Based Sealant Complying With Bs 5212, Bs 4254 And En-141875-2003 With Minimum Movement Accommodation Factor (Maf) Of+/- 30% Having Minimum 10 Year Performance Guarantee Applying Masked Tape On The Edges Of Joints And Removing The Masking Tape After Filling Of Sealant As Per The Method Specified By The Manufacture Complete As Specified And Directed. , Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors/Dado, Aprons Etc Laid Bedded And Pointed In Any Mortar , Material And Labour For Machine Pressed Precast Concrete Interlocking Paver Block Any Shape And Size Confirming To Is 15658-2006 Of 80 Mm Thickness, M-40 Grade With Grey Cement And Pigment All As Specified. , Material And Labour For Providing, Cement Concrete Type B1 ,1:2:4 Using 20 Mm Graded Stone Aggregate In Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges All As Specified. , Note For All Items Due To The Non-Availability Of The Runway/Airfield During Daytime, The Site May Be Made Available For Execution Of Work During Night Hours On Certain Occasions, Subject To Operational Requirements And Availability. The Contractor Shall Make All Necessary Arrangements For Adequate Lighting And Other Safety Measures Required For Carrying Out The Work During Night Time. The Rates Quoted By The Bidder Shall Be Deemed To Be Inclusive Of All Costs Associated With Execution Of Work During Night Hours, And No Additional Payment Shall Be Admissible On This Account.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 10
Contract Date: Ref. Documents Contract Value : 9.85 Lakh
Government Departments No of Bidders 8
14.
Public Administrative Department #11382445 AOC
Tender For Annual Plan-Pro.No 315/26 Crematorium Construction In Avanur Gp 2025-26-Avr 315/26-General Civil Work - Building construction 2 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 5 OD316310/2025-2026:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site . Modified from 60.7.1 6 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 7 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 8 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 10 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 11 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 12 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 13 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 14 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III)derived from natural sources: 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 15 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 16 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 17 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 18 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work 19 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 20 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 21 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 22 21.3.3:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness(weight not less than 20 kg/sqm) 23 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 24 11.20.2:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement 25 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 26 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap 27 17.2.2:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat and lid 28 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 29 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 30 18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore 31 50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall 32 50.18.7.4.2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall 33 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 34 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 35 17.29:Providing and fixing 100 mm sand cast Iron grating for gully trap. 36 OD325929/2025-2026:Supply and fixing PVC frame and shutter for doors of size of (0.8mX2.00m)including cost of labour and materials as per direction of departmental officers. 37 OD326277/2025-2026:Supplying and fixing Pressed Steel Door of standard pattern with frames as per profile of IS:4351 of section 105*60mm using 18G (1.2mm thick CRCA) sheet and shutters made of section 75*30mm of outer styles and horizontal members and then inserted with enclosed and stiffened sheet 26CR as per the specification with zinc chromate primer including all charges of fittings, conveyance etc, complete.steel door of size 120*210 cms 38 51.19.ST2:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 2. 15 to below 25 flush capacity 39 OD326287/2025-2026:Ferrow cement soak pit 75 cm dia and 75 cm height 40 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 41 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 42 10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover 43 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 44 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes 45 OD326395/2025-2026:supplying and fixing 150mm half cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and materials , conveyance, labour charges etc. 46 OD330008/2025-2026:Roofing with Premium Aluzinc roofing powder coated Tiled design sheet with matte finishing 0.5mm thick or nearest available thickness with overlaps of 150mm at ends and G I hook or screw or crank C I bolts and nuts including plain and bitumen washers etc completed.
Contract Date: Jun 27, 2026 Contract Value : 30.93 Lakh
Government Departments No of Bidders 3
Contract Date: Ref. Documents Contract Value : 1.67 Lakh
Government Departments No of Bidders 2
18.
Tourism #11346896 AOC
Bids Are Invited For 1 Headwall /Endwall Platform For Podium, Those Platform Suitable For Swimming Pool With Water Recirculation In Four Sides. It Is Composed Of An Aisi 304 Stainless Steel Frame And Plastic Grating, Grating Should Be Made Of Polypropylene Composite To Resist Uv Rays And Chemical Products Present In The Water, The Grating Should Have Free Space Of Over 45% To Facilitate Water Recirculation, Platform Can Be Used As Turning Panel And Iy Should Include Anchors For Mounting And For Starting Blocks, Width - 2.5 M. Make - Aqvastar / Astralpool/ Anti 2 Starting Blocks With Mounting Frames And Foundation Bolts - The Starting Block Is Manufactured Using Aisi-316L Painted With Epoxy Resins Or Polished And Dip Of Plate Size 500 X 700 Mm. Hight Density Polyethylene With No-Slip Machining Top Platform, Adjustablem Angle Of Diving Platform Surface Max 10°. Double Handle Horizontal And Vertical For Backstroke Start. The Starting Block Is Provided To Numbers Standard In 4 Sides. Made In According With Fina Regulation In Force. Make - Aqvastar / Depatech/ Anti 3 Float Lane - 150 Mm Dia. Anti Wave Breaker Lane Ropes Made Made In Polyethylene With Anti-Acid And Anti Uva Treatments With Special Feature For Eliminate Wave Movement. Complete With Spring Tensioner All In Stainless Steel 316L And Cover In Silicon, In According With En 13451-5 And Fina Regulation In Force. Suitable For High Level Competitions Including Ss 316L Float Line Fixing Post Anchored On The Deck. Make - Aqvastar / Depatech/ Anti 4 S.S. Float Lane Storage Designed To Transport And Store The Float Line After Use In The Swimming Pool. Easy To Use And Aesthetically Discreet. The Float Line Roller Is Manufactured Using Aisi-304 Stainless Steel And Includes A Pvc Bag For Collecting Excess Water From The Float Lines. BagS Lower Outlets, It Is Emptied In A Controlled Manner With No Water Spillage. The Cart Has Four Rotating Wheels For Maximum Mobility. Two Of These Have A Brake. Suitable For Storage Of 1 No. Of 50 M Long 150 Mm Dia. Float Lane. Make - Aqvastar / Depatech/ Anti 5 False Start Indicator Post- Comprising Of 2 Nos. Stainless Steel 316L Posts Each Of 48 Mm Dia And 1.8 M Height Provided On Either Side Of The Racing Pool Properly Anchored In A Suitable Anchoring Socket On The Deck At Specified Location Including One Post Provided With Pulley And Quick Cord Fixing And Loosening Device And Including False Start Line Comprising Of Polyester Cord And A Float. As Per Fina. Make - Aqvastar / Depatech/ Anti 6 D) Back Stroke Turn Indicator Post - Comprising Of 2 No Stainless Steel Ss 316L Posts Each Of 48 Mm Dia And 1.8 M Height Provided On Either Side Of The Racing Pool Properly Anchored In A Suitable Anchoring Socket On The Deck At Specified Location And Shall Span Across The Sides Including Set Of Flags As Per Specifications As Per Fina. Make - Aqvastar / Depatech/ Anti 7 Water Polo Goal Post, The Water Polo Goal Post Should Be Lightweight, Floating And Very Resistant. It Is Built Entirely From Aluminium And Is Ovenpainted White. Manufacturing And Measurements In Accordance With Fina International Swimming Federation Standards, Floating: Polyurethane Foam-Filled Aluminium Floats, Goal Frame: Aluminium Tube, Net Fastening: Stainless Steel Round Rod, Net Side Pipe: Stainless Steel Round Pipe With Fastening In Frame And Float, Fastening For Goal Lines, Nets Included. Made In According With Fina Regulation In Force. Make - Aqvastar / Depatech/ Anti 8 Maxiflex B Diving Spring Board: The 16’ Maxi-B Is Basically A Onepiece Ribbed Extrusion Of Aluminum Alloy 6070-T6, Heat Treated For Yield Strength Of 50,000 Psi. It Has A Torsion-Box Extrusion, An Anchor Angle, And Tip End Cap Riveted To The Basic Section. It Is Tapered From The Fulcrum Area To The Diving Tip, And It Is Tapered From The Fulcrum Area To The Anchor End. The Double-Taper Allows The Whole Board To Arc While Flexing, Giving It Approximately 15% More Lift Than The 16’ Duraflex. The Anchor Bolts Are Reinforced Underneath By U Shaped Aluminum Pieces: Maxi-Bolting Extrusions. What Distinguishes The Maxi-B From The Other Models Is That The Diving Tip Has 189 Slots In The Metal Of The Top “Skin” Which Reduces The Weight Of The Tip-End. Make - Duraflex 9 Diving Board Short Stand Without Handrail: The Diving Stand Anchor And Fulcrum Assembly Shall Be Durafirm, Short Stand Designed For Mounting On A Concrete, Steel, Or Other Field-Fabricated Diving Platform. The Diving Stand Shall Consist Of Heavy Aluminum Castings Coated With Epoxy. The Roller Tube And Tracks Shall Be Heat Treated Extruded Aluminum, Hard Anodized. The Bearings For The Roller Tube And Slide Shall Be Nylon With Grease Path. The Diving Board Anchor Hinges Shall Be Heat Treated Aluminum Forgings With A Design Tensile Strength Of 35,000 Psi And Shall Be Hard Anodized. The Diving Board Anchor Bolts Shall Be 5/8 Diameter By 3 1/2 Long Silicon Bronze. The Diving Stand Shall Be Supplied (Without Guard Rails), (With Top And Intermediate Guard Rails On Two Sides), Top Guard Rail Only On Two Sides), (Top Guard Rail On One Side Only). The Diving Stand Guard Rails Shall Be Stainless Steel Tubing, Firmly Attached To The Guard Rail Supports With Stainless Steel Band Fasteners. The Rails Shall Be Extended To The Edge Of The Swimming Pool And The Rail Ends Shall Be Fitted With Safety Tips. The Stand Shall Be Designed For Mounting On New Concrete Platforms With The Use Of Six Durafirm, Catalog #70-231-900 Bronze Deck Anchors. Make - Duraflex Total Quantity : 88
Contract Date: Ref. Documents Contract Value : 1.74 Crore
Government Departments No of Bidders 3
Contract Date: Ref. Documents Contract Value : 3.30 Lakh
Government Departments No of Bidders 4
Madhya Pradesh View Result →
20.
Public Administrative Department #11334347 Price Bid
Tender For Annual Plan-2025-26 Pudur Gp Pro.No: 15 Ward 1-Center No:176 Kinnattukkara Anganawadi Kettidam Nirmmanam-General Civil Work - A.W Nirmanam 2 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared 3 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil 4 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 5 OD99671/2025-2026:DRY RUBBLE MASONRY -Dry rubble without concrete levelling course masonry with good quality blasted rubble includingpacking to compactness. 6 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 7 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 8 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete 9 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 10 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15°landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III)derived from natural sources: 3 graded stone aggregate 20 mm nominal sizederived from natural sources). 11 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 12 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 13 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 14 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 15 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 16 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 17 50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete 18 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 19 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 20 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 21 17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 22 18.54.1:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms 23 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 24 50.18.8.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2 25 50.18.8.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 26 50.18.8.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 27 17.7B:Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. 28 50.18.9.6.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2 29 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 30 17.10.2.3:Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board470x420 mm bowl depth 178 mm 31 10.26.1:Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.M.S. tube 32 10.25.1:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete 33 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete 34 11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. 35 11.20.4:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment 36 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
23.
Defence #11321321 AOC
Bids Are invited for Insulation Tester , Supply Only 80 Mm Bore Sluice Valve Pn - 1.6 Is 14846-2000 With Spindle Iron Etc. , Supply Only 100 Mm Bore Sluice Valve Pn - 1.6 Is 14846-2000 With Spindle Ironetc. , Supply Only 150 Mm Bore Sluice Valve Pn - 1.6 Is 14846-2000 With Spindle Iron Etc. , Supply Only 200 Mm Bore Sluice Valve Pn - 1.6 Is 14846-2000 With Spindle Iron Etc. , Supply Only 50 Mm Bore Gate Valve Gum Metal Class- Ii Screwed Down High Pressure Etc. , Supply Only 40 Mm Bore Gate Valve Gum Metal Class-Ii Screwed Down High Pressure Etc. , Supply Only 25 Mm Bore Gate Valve Gum Metal Class-Ii Screwed Down High Pressure Etc. , Supply Only 20 Mm Bore Gate Valve Gum Metal Class-Ii Screwed Down High Pressureetc. , Supply Only Straight Plain Brass Ferrules Or Connecting Screws Screwed Bolt Ends Of Size 20 Mm Bore Pipe Etc. , Supply Only Straight Plain Brass Ferrules Or Connecting Screws Screwed Bolt Ends Of Size 25 Mm Bore Pipe Etc. , Supply Only Rotational Moulded Polyethylene Water Storage Tank Cylindrical Vertical With Closed Top Of Capacity Five Hundred Litres Etc. , Supply Only Rotational Moulded Polyethylene Water Storage Tank Cylindrical Vertical With Closed Top Of Capacity One Thousand Litres Etc. , Supply Only Twenty Five Millimeter Bore Gate Valve Gum Metal Class Two Screwed Down High Pressure With Clutch Handle Etc. , Supply Only Twenty Millimeter Bore Gate Valve Gum Metal Class-Two Screwed Down High Pressure With Clutch Handle Screwed Both Etc. Total Quantity : 786
Contract Date: Ref. Documents Contract Value : 39.13 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
West Bengal View Result →
24.
Tourism #11320518 Technical Bid
Tender For Tourism Development Work Of Shri Ramjanaki Temple, Kotawari In Shahjahanpur District.-1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. All Kinds Of Soil Dsr-2.6.1 170.25 Cum 133.12 127.80 21757.52 In All Kind Of Soil Upto 1.5M To 3.0M. Depth 2.6.1+2.26.1 18.74 Cum 228.22 219.09 4106.24 In All Kind Of Soil Upto 3.0M To 4.5M. Depth 2.6.1+(2.26.1* 2) 6.37 Cum 323.31 310.38 1977.88 2 Excavation Of Foundation In Ordinary Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 Meter And Including Filling, Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Sur-Plus Earth As Directed By The Engineer Incharge Up To A Distance Of 30 Meters From The Foundation Trenches. Dsr-2.1.1 35.61 Cum 97.38 93.49 3329.14 3 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. Dsr-2.25 8.70 Cum 147.00 141.12 1227.84 4 Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete Dsr-2.25(A) 55.60 Cum 525.36 504.34 28041.40 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Dsr-4.1.8 70.78 Cum 5108.83 4904.47 347162.56 6 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. Dsr-2.27 26.31 Cum 1592.76 1529.05 40229.27 7 Diluting And Injecting Chemical Emulsion For Postonstructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration Dsr-2.35.3.1 194.47 Sqm 232.53 223.23 43411.24 8 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). Dsr-5.3 82.66 Cum 8628.83 8283.68 684729.10 9 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) Footing Dsr-5.1.2 21.98 Cum 6784.08 6512.72 143149.60 10 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Dsr-5.2.2 22.97 Cum 8139.44 7813.86 179484.39 Abstract Of Cost Delhi Schedule Of Rate Effective From 12/07/2023 X (0.735X106/107X1.03) Has Been Followed. Proposed Tourism Development Of Ramjanki Temple At Kotawari, Tilhar, Sahjahanpur, U.P. 11 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers Dsr-5.9.5 257.49 Sqm 552.28 530.19 136518.66 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform Dsr-5.9.3 407.10 Sqm 695.41 667.60 271778.96 13 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete Dsr-5.9.1 63.96 Sqm 294.10 282.34 18058.37 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts Dsr-5.9.6 208.86 Sqm 720.95 692.11 144554.66 15 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dsr-6.1.1 16.84 Cum 5527.80 5306.69 89341.45 16 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.1.2 51.30 Cum 5349.01 5135.05 263427.92 17 Providing And Laying Damp-Proof Course 50Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources). Dsr-4.11 2.14 Sqm 371.80 356.93 763.83 18 Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With A Piece Of Cloth Lightly Soaked In Kerosene Oil. Dsr-4.13 44.55 Sqm 109.61 105.22 4687.75 19 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.4.2 80.04 Cum 6829.23 6556.06 524747.32 20 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Dsr-6.13.2 60.18 Sqm 842.82 809.11 48692.17 21 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More Dsr-5.22A.6 186.64 Qtl 8088.48 7764.94 1449250.34 22 15 Mm Cement Plaster On Plinth Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Coarse Sand) Dsr-13.5.1 65.74 Sqm 308.80 296.45 19488.62 23 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.5.2 252.10 Sqm 296.50 284.64 71758.35 24 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.4.2 609.85 Sqm 257.73 247.42 150888.63 25 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To R.C.C. Projections. Dsr-5.30 315.01 Rm 58.80 56.45 17781.09 26 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Dsr-11.3.1 29.40 Sqm 460.63 442.21 13000.95 27 Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement.18 Mm Thick Dsr-11.6.1 3.35 Sqm 496.52 476.66 1596.81 26 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm Dsr-11.41.2 137.75 Sqm 1165.05 1118.45 154065.99 27 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To |.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm Dsr-11.46.2 10.17 Sqm 1217.25 1168.56 11884.22 28 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Dsr-11.37A 148.53 Sqm 812.00 779.52 115781.77 29 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Dsr-11.39 4.40 Sqm 997.47 957.57 4213.30 30 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Ordinary Cement Without Any Pigment 11.20.4 6.12 Sqm 792.24 760.55 4654.54 31 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 35 Mm Thick Dsr-9.5.1.1 6.30 Sqm 3083.86 2960.50 18651.18 32 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 30 Mm Thick Dsr-9.5.1.2 83.22 Sqm 2810.38 2697.97 224524.67 33 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws Dsr-9.21.1 15.33 Sqm 1794.43 1722.65 26408.23 34 Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10X15Cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). Dsr-9.53 128.00 Nos 171.63 164.77 21090.11 35 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding Dsr-9.48.1 937.05 Kg 164.32 157.75 147816.54 36 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10X10 Cm Of C.C. 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). Dsr-10.13.1 100.80 Kg 106.27 102.02 10283.67 37 Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 35X35X5 Mm, Joints Mitred And Welded By Angle Iron 35X35X5 Mm Or 35X 5 Mm Flat Pieces To The Existing T-Iron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer, All Complete As Per The Direction Of Engineer-In-Charge. Dsr-10.31 125.00 Kg 97.87 93.96 11744.60 38 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-Incharge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Dsr 10.28 133.33 Kg 579.28 556.11 74146.05 39 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).(Sal Wood) Dsr-9.1.2 1.61 Cum 87387.28 83891.79 135065.79 40 Fixing Of Door, Windows/Ventilators Chaukhats In Position. (A) Door Chaukhats Above 1.5 Sqm To 5.0Sqm Mr 19.00 Nos 150.00 144.00 2736.00 (B) Window Chaukhats Above 1.5 Sqm 12.00 Nos 100.00 96.00 1152.00 (C) Ventilator Chaukhats 7.00 Nos 50.00 48.00 336.00 41 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) Dsr-13.47.1 407.00 Sqm 128.32 123.19 50137.46 42 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Dsr-13.41.1 434.15 Sqm 139.23 133.66 58030.01 43 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Dsr-13.80 841.15 Sqm 117.03 112.35 94505.07 44 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete :250X16 Mm Dsr-9.62.2 11.00 Nos 145.27 139.46 1534.05 45 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete : 250X10 Mm Dsr-9.63.1 21.00 Nos 62.92 60.41 1268.53 200X10 Mm Dsr-9.63.2 65.00 Nos 52.05 49.97 3247.81 46 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete :100 Mm Dsr-9.66.2 54.00 Nos 24.41 23.44 1265.50 47 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete Dsr-9.82 1.00 Nos 91.23 87.59 87.59 48 Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: (A) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Including Adjoining Walls Upto 300 Mm Height Including Cleaning The Surface Before Treatment. (B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge. (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep. (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.“All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge : With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm Dsr-22.7.1 198.55 Sqm 1263.41 1212.87 240815.58 49 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture Dsr-13.48.3 144.65 Sqm 128.02 122.90 17777.47 50 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture Dsr-13.48.2 209.70 Sqm 132.18 126.90 26610.03 51 Providing & Fixing Panes Of Glass With Equal Or Equivalent I.S.I Marked Quality Putty. Brads And Springs And Including Supply Of All Materials And Labour Etc Complete . 3.8 To 4.7 Mm Thick Dsr-10.30.1 44.76 Sqm 805.96 773.72 34631.80 52 Supply And Fixing Of Drop Down Rail / Grab Bars Mr 4.00 Nos. 4400.00 4224.00 16896.00 53 Providing, Driving With Hydraulic Piling Rigs With Power Units And Installing Driven Cast-In-Situ Reinforced Cement Concrete Piles Of Grade M-25 Of Specified Diameter And Length Below The Pile Cap, To Carry Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Shoe And The Length Of Pile To Be Embedded In The Pile Cap Etc. All Complete. (Length Of Pile For Payment Shall Be Measured From Top Of Shoe To The Bottom Of Pile Cap) : 400 Mm Dia Piles Dsr-20.1.1 48.00 Rm 2075.18 1992.17 95624.30 54 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : 30 Mm Thick Dsr-8.14.1.5 50.74 Sqm 3971.79 3812.92 193478.98 55 Stone Work In Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Including Pointing With Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade Both Face Dressed Red Sand Stone Dsr-7.12.1.1 3.56 Cum 51218.78 49170.03 175241.97 56 Extra For Stone Work Ashlar Sunk Or Moulded Or Sunk And Moulded Or Carved In : Triangular Or Square Or Rectangular Pillars Dsr-7.21.1 3.56 Cum 2834.15 2720.79 9696.89 57 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. Dsr-8.15 99.58 Kg. 535.78 514.35 51219.04 58 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 50Mm Dsr 8.14.1.3 37.80 Sqm. 4342.28 4168.59 157572.62 59 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases. Dsr 8.16 30.00 Nos. 32.92 31.61 948.21 60 Providing And Fixing Stone Jali 40 Mm Thick Throughout In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc. Red Sand Stone Dsr 7.33.1 4.50 Sqm. 11198.29 10750.35 48376.59 61 Stone Work, Plain In Copings, Cornices, String Courses And Plinth Courses, Upto 75 Mm Thick In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand), Including Pointing With White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade.: Red Sand Stone Dsr 7.32.1 0.47 Cum. 70303.46 67491.32 31720.92 62 Carving & Engraving Work On Red Sand Stone (Labour Only) M.R. 9.73 Sqm. 15615.00 14990.40 145856.59 63 Manufacturing, Supplying And Fixing Retro Reflective Overhead Signage Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity And Encapsulated Lens Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iii Of Astm-D-4956-01 As Approved By Engineer-In-Charge, Letters, Borders Etc. As Per Irc : 67-2001 In Silver White With Blue Colour Back Ground And With High Intensity Grade, Pasted On Substrate By Pressure Sensitive Adhesive Backing Which Shall Be Activated By Applying Pressure Conforming To Class Ii Of Astm-D-4956-01 And Fixing The Same To The Plate Of Structural Frame Work By Means Of Suitable Sized Aluminium Alloys, Rivets Or Bolts & Nuts @ 300 Mm Centre To Centre All Along The Periphery As Well As In Two Vertical Rows Along With Theft Resistant Measures, Including The Cost Of Painting With Two Or More Coats Of Epoxy Paint In Grey Colour On The Back Side Of Aluminium Sheet Including Appropriate Priming Coat. The Rate Includes The Cost Of Rounding Off The Corners, Lowering Down The Structural Frame Work From The Gantry, Fixing And Erecting The Same In Position All Complete As Per Drawings, Specification And Direction Of The Engineerincharge.( Structural Frame Work Including M.S. Plate To Be Provided Separately. Rectangular Area Of The Sheet Only Shall Be Measured For Payment). Overhead Informatory Road Signage Dsr 16.60.1 8.64 Sqm. 4409.78 4233.39 36576.45 64 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Dsr 8.2.2.2 34.45 Sqm 3852.10 3698.01 127396.50 65 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. Dsr-4.17 6.00 Sqm 561.96 539.48 3236.87 66 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50 Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge.80 Mm Thick C.C. Paver Block Of M-35 Grade With Approved Colour Design And Pattern Dsr-16.91.2 207.07 Sqm 818.60 785.85 162723.31 1 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fitting And Fixtures Completed Including Cutting And Making Good The Walls And Floors Wherever Required.White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 17.1.1 2.00 Nos. 5075.38 4872.36 9744.73 2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Isi Marked White Solid Plastic Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 17.2.1 3.00 Nos. 4886.50 4691.04 14073.11 3 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require A) White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.7.4 4.00 Nos. 1409.35 1352.98 5411.91 4 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260X350 Mm And 340X410X265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required A) One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern 17.4.1 3.00 Nos. 4918.90 4722.14 14166.42 5 Providing And Fixing Flexible P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete. Flexible Pipe 17.28.2 A) 32Mm Dia 17.28.2.1 4.00 Nos. 89.66 86.07 344.29 B) 40Mm Dia 17.28.2.2 2.00 Nos. 89.66 86.07 172.15 6 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 17.31 4.00 No. 1205.92 1157.69 4630.74 7 Providing And Fixing Cp Brass Single Lever Lelephonic Wall Mixture Of Quality & Make And As Per Thedirection Of Enginer-Incharge. A) 15Mm Dia Nominal Dia. 17.22B 2.00 Each 5205.39 4997.17 9994.34 8 Providing And Fixing 8 Mm Dia C.P./S.S. Jet With Flexible Tube Upto 1 Meter Long With S.S. Triangular Plate For Eureopean Type W.C. Of Quality And Make As Approved By Engineer-In-Charge. 15Mm Nominal Bore 17.16A 2.00 Each 261.85 251.38 502.76 Sanitary Fixtures & Accessories : I 9 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms. Dsr-17.73.2 1.00 Each 531.69 510.43 510.43 10 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements, Weighing Not Less Than 106 Gms. Dsr-18.65 1.00 Each 83.58 80.24 80.24 11 Providing And Fixing C.P. Brass Ablution Health Faucet Assembly With 1.0 M Long Braided Pvc Hose With Mounting Bracket Fixed On Wall Complete.[For Ewc]-Make-Jaquar Ald565 Mr 2.00 Each 1705.00 1636.80 3273.60 12 Providing And Fixing C.P. Brass Two-Way Angle Valve For Ewc Points & For Fixing Ablution Health Faucet Of Approved Quality Conforming To Is:8931. 15 Mm Nominal Bore-Essco Sqt 526A Mr 2.00 Each 1335.00 1281.60 2563.20 1 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion . (I) Single Socketed Pipes. A) 110Mm Diameter 12.41.2 31.30 Mtr 283.04 271.72 8504.80 2 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over Pvc Sheet 1M X 1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement,Punning,Rounding The Edges And Making And Finishing The Outlet Complete. A) 110Mm 12.22 7.00 Nos. 223.68 214.73 1503.13 3 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50X50Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. A) 110Mm 12.43.2 20.00 Nos. 278.47 267.33 5346.54 4 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I)Single Socketed Pipes. 110 Mm Diameter 12.41.2 Rm. 283.04 271.72 5 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. Dsr-12.44 8.00 Nos. 41.02 39.38 315.06 6 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Nsr 20.00 Rm. 485.00 465.60 9312.00 B) 90Mm Dia P.V.C. Pipe Nsr 25.00 Rm. 390.00 374.40 9360.00 6 Providing & Fixing Upvc Floor Trap Of Self Cleansing Design With Cp Jali Complete In All Respects. (Make : Supreme / Finolex / Prince) P-Trap Type Floor Trap 110 X 90 Mm Nsr 12.00 No. 195.00 187.20 2246.40 7 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/Accessories For Unplasticised Rigid Pvc Pipes Including Jointing With Seal Ring Leaving 10 Mm Gap For Thermal Expansion.. (Make : Supreme / Finolex / Prince) Door Tee 110X110X110 Mm Nsr 2.00 No. 280.00 268.80 537.60 110X110X90 Mm Nsr 2.00 No. 200.00 192.00 384.00 Bend 110 Mm Nsr 2.00 No. 170.00 163.20 326.40 Soil Waste & Vent Pipes And Fittings - Ii 90 Mm Nsr 2.00 No. 160.00 153.60 307.20 1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.Lls Etc. (Internal Work) I) Exposed On Wall A) 32Mm Nominal Dia Pipe 18.9.4 30.00 Rm. 328.94 315.78 9473.44 3 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Outer Dia Pipes 18.7.3 20.00 Rm. 301.15 289.11 5782.13 4 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work Including Cutting Chases And Making Good The Walls Etc. A) 15Mm Dia Nominal Outer Dia Pipes 18.8.1 70.00 Rm. 373.34 358.40 25088.28 B) 20Mm Dia Nominal Outer Dia Pipes 18.8.2 20.00 Rm. 403.19 387.06 7741.18 C) 25Mm Dia Nominal Outer Dia Pipes 18.8.3 Rm. 470.42 451.60 5 Providing & Fixing G.I. Pipes Complete With G.I. Fittings & Clamps Including Cutting & Making Good The Walls Etc. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Bore (Medium Duty) Dsr-18.10.3 20.00 Rm. 413.76 397.21 7944.21 Ii) Concealed Pipe Including Painting With Anticorrosive Bitumatic Paint, Cutting Chases And Making Good The Wall. A) 15Mm Dia Nominal Bore Dsr-18.11.1 15.00 Rm. 435.32 417.91 6268.65 2 Painting G.I. Pipes And Fittings With Synthetic Enamel White Paint Over A Ready Mixed Priming Coat, Both Of Approved Quality For New Work. A) 15Mm Dia Nominal Bore. Dsr-18.38.1 15.00 Rm. 14.55 13.97 209.51 B) 25Mm Dia Nominal Bore. Dsr-18.38.3 10.00 Rm. 22.69 21.78 217.79 2 Providing And Fixing 45 Cm Long Unplasticised Pvc Connection Pipe With Brass Unions. A) 15Mm Nominal Bore Dsr18.21.2.1 4.00 Nos. 73.31 70.38 281.51 5 Providing & Fixing Cp Brass Bib Cock Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.49.1 7.00 Nos. 380.09 364.88 2554.19 6 Providing & Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. A) 15Mm Nominal Bore 18.51.1 7.00 Nos. 599.19 575.22 4026.57 7 Providing & Fixing C.P. Brass Angle Valve For Basin Mixer And Gyser Points Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.53.1 14.00 Nos. 430.71 413.48 5788.75 8 Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality. A) 25Mm Dia Nominal Bore 18.17.1 2.00 Each 466.78 448.11 896.23 B) 32Mm Dia Nominal Bore 18.17.2 1.00 Each 517.18 496.50 496.50 C) 50Mm Dia Nominal Bore 18.17.4 Each 769.96 739.16 Water Supply Pipes And Fittings - Iii 9 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete 20Mm Dia Nominal Bore 18.18.2 1.00 Each 346.86 332.99 332.99 A) 25 Mm Nominal Bore 18.18.3 2.00 Nos. 348.03 334.10 668.21 10 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Of Approved Brand And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 18.48 A) Circular Tank 18.48 2500.00 Ltrs 8.25 7.92 19799.33 11 Providing And Fixing Stone Slab Table Rubbed, Edges Rounded And Polished Of Size 75X50Cm Deep And 1.8Cm Thick Fixed In Urinal Partitions By Cutting A Chase Of Appropriate Width With Chase Cutter And Embedding The Stone In The Chase With Epoxy Grout Or With Cement Concrete 1:2:4 (1Cement: 2Coarse Sand: 4Graded Stone Aggregate 6Mm Nominal Size) As Per Direction Of Engineerin-Charge And Finished Smooth. 8.10 Granite Stone Of Approved Shade Dsr-8.10.2 1.08 Sqm. 3038.79 2917.23 3150.61 1 Providing & Fixing Soil, Waste And Vent Pipes. A) 100Mm Dia Centrifugally Cast Iron S & S Pipe. Dsr17.35.1.2 6.00 Rm. 885.53 850.11 5100.67 2 Providing Lead Caulked Joints To Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes & Fitting Of Diameters. A) 100Mm Dsr-17.58.1 2.00 Each 466.86 448.18 896.37 3 Providing & Fixing M.S. Holder Bat Clamps Of Approved Design To Sand Cast Iron/Centrifugally Cast (Spun) Iron S & S Pipe Embeded In & Including Cement Concrete Blocks 10X10X10Cm. Of 1:2:4 Mix (1 Cement : 2 Coarse : 4 Graded Stone Aggregate 20Mm Nominal Size). Including Cost Of Cutting Holes & Making Good The Walls Etc. A) For 100Mm Dia Pipe. Dsr-17.37.1 2.00 Each 272.13 261.24 522.49 4 Providing & Fixing Cast Iron Trap Of Self Cleansing Design With Or Without Ventarm Complete, Including Cost Of Cutting & Making Good The Walls & Floors. A) 100Mm Inlet & 75Mm Outlet. Dsr17.60.2.1 1.00 No. 1481.31 1422.06 1422.06 5 Providing & Fixing Cast Iron Coller. A) 100Mm Dia. Dsr17.57.1.2 2.00 No. 384.85 369.46 738.91 6 Providing And Fixing Plain Cast Iron S & S Sanitary Bend. A) 100Mm Dsr17.39.1.2 2.00 Nos. 427.52 410.42 820.84 1 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Mr 7.50 M 485.00 465.60 3492.00 2 Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber With F.P.S. Bricks Of Class Designation 75 And Water Tight C.I. Cover With Frame Of 300 X 300Mm. Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design. A) 150 X 100 Mm. Size P Type With Sewer Bricks Conforming To Is : 4885 Dsr-19.4.2.1 1.00 Nos 2050.58 1968.56 1968.56 Soil Waste & Vent Pipes And Fittings - Ii Schedule Of Quantities For Internal Sewerage System - Iv 3 Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Rcc Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement :4 Coarse Sand :8 Graded Stone Aggregate 40Mm Nominal Size) Inside Plastering 12Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With Floating Coat Fo Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nminal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design 19.7 Inside Size 90X80Cms And 45Cms Deep Including Ci Cover With Frame (Light Duty) 455X610Mm Internal Diamensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15Kg). 19.7.1 With Fps Bricks Of Class Designation 150 Dsr-19.7.1.1 1.00 Each 9577.59 9194.49 9194.49 External Sewerage Works 1 Excavating Trenches In All Kind Of Soil Of Required Width For Pipes. Including Excavation For Sockets And Dressing Of Sides, Ramming Of Bottoms, Including Getting Out The Excavated Soil & Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering, Etc & Disposing Of Surplus Excavated Soil As Directed Within A Lead Of 50M. Up To 1.50 M Depth Pipes 80 Mm To 300 Mm Diameter 2.10.1.2 20.00 Rm 264.10 253.54 5070.79 2 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. 160Mm Dia Under Floor (For External Sewer) Nsr 20.00 Metre 1190.00 1142.40 22848.00 3 Constructing Brick Masonry Manhole With F.P.S. Bricks In Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) Rcc Top Slab With 1 : 2 : 4 Mix (1 Cement : 2 Coarse Sand : 4 Grade Stone Aggregate 20Mm Nominal Size); Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1Cement 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size) Finishd With A Floating Coat Of Neat Cement Complete As Per Standard Design Inside Size 90 X 80 Cm & 45 Cm Deep Including Ci Cover With Frame (Light Duty) 455 X 610 Mm Internal Dimension Total Wt. Of Cover & Frame To Be Not Less Than 38 Kg (Wt. Of Cover 23 Kg And Wt. Of Frame 15 Kg) 19.7.1.1 3.00 Nos 9577.59 9194.49 27583.46 4 Extra For Depth For Manhole With F.P.S. Bricks Size 90 X 80 Cm 19.8.1.1 0.30 Rm 6618.83 6354.07 1906.22 5 Providing M.S. Foot Rests Including Fixing In Manholes With 20*20*10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design : With 20 X 20 Mm Square Bar 19.15.1 3.00 Nos 408.51 392.17 1176.51 6 Providing And Fixing Square Mouth S.W. Gully Trap Grade `A Complete With C.I. Grating Brick Masonry Chamber With F.P.S Bricks And Water Tight Ci Cover With Frame Of 300 X 300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design 180 X 150 Mm. Size P Type 19.4.3.1 2.00 Nos 2101.54 2017.48 4034.96 7 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 19.32.1 1.00 Nos 20145.75 19339.92 19339.92 8 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20X10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design With 20X20 Mm Square Bar Dsr-19.15.1 8.00 Nos. 408.51 392.17 3137.37 9 Providing And Fixing S.C.I. Tee 150 Mm At The Inlet And Outlet Of Septic Tank. Dsr-7087 2.00 Nos. 621.00 596.16 1192.32 10 Providing And Fixing Soil, Waste And Vent Pipes:75 Mm Diameter Sand Cast Iron S&S Pipe As Per Is: 1729 Dsr17.35.2.1 3.00 Rmt. 783.54 752.19 2256.58 11 Providing & Fixing Of 75Mm Dia Sand Cast Iron S&S As Per Is - 1729 Terminal Guard. Dsr17.56.2.1 2.00 Nos. 255.52 245.30 490.59 12 Providing & Fixing 75Mm Plane Sand Cast Iron S&S Bend Of Required Drgtee. Dsr17.39.2.1 2.00 Nos. 282.18 270.89 541.78 13 Providing Lead Caulked Joints To Sand Cast Iron/ Cetrifugally Cast (Squn) Irons Pipes & Fitting Of 50 Mm Dia Dsr-17.58.2 2.00 Nos. 394.67 378.89 757.77 14 Providing And Fixing In Position Precast Rcc Manhole Cover And Frame Of Required Shape And Approved Quality.M.D. -10- Circular Shape 500Mm Internal Diameter Dsr19.19.2.2 2.00 Nos. 879.42 844.24 1688.49 1 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.10.3 51.00 Each 1115.37 1070.76 54608.68 2 Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.11 4.00 Each 1187.60 1140.10 4560.39 3 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. Dsr 1.21.1 17.00 Metre 97.32 93.43 1588.26 4 Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls/Hffr Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire Dsr 1.14.1 650.00 Metre 177.15 170.07 110542.86 5 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire Dsr 1.14.2 188.00 Metre 285.12 273.71 51457.72 6 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire Dsr 1.14.3 202.00 Metre 253.94 243.79 49244.67 7 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire Dsr 1.14.4 105.00 Metre 333.78 320.42 33644.59 8 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required Dsr 1.32 22.00 Each 445.54 427.72 9409.83 9 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required Dsr 1.34 15.00 Each 99.60 95.62 1434.25 Electrical Works 10 Installation ,Testing, Commissioning Of Wall Bracket /Ceiling Fittings Of All Sizes And Shapes Containing Upto Two Ls/Cfl/Led Lamps Per Fitting, Complete With All Accessories Including Connections Etc. As Required. Dsr 1.35 1.00 Each 90.48 86.86 86.86 11 Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Lighter (Round/ Square/ Rectangular) Smd Type Of Following Body Material With Pmma And Prismatic Diffuser And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency >85%, Operating Voltage Ac 140-270 Volt, Frequency 50/60 Hz, Operating Temp Range -50C To 400C, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.≥0.95, Ip20, Cri >80, Ugr (Unified Glare Rating) < 19, Flicker Free (Flicker Should Be Below 5%), Life Time (Led, Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000°K /4000°K / 5700°K / 6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Colour Matching) <3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Confirming To Relevant Bis Standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing Complete In All Respect I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 And <120 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C) Powder Coated Die Cast /Extruded Aluminium Body Including Trim 18 Watt Mr 19.00 Each 700.00 672.00 12768.00 12 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required Dsr-5.4 3.00 Each 5681.03 5453.79 16361.37 13 Supplying And Laying 25 Mm X 5 Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) Dsr 5.9 55.00 Metre 109.48 105.11 5780.78 14 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole Dsr-2.10.1 9.00 Each 194.64 186.85 1681.68 15 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 6 Way (4 + 12), Double Door Dsr-2.3.1 2.00 Each 1677.24 1610.15 3220.30 16 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 4 Way (4 + 12), Double Door Dsr-2.4.1 1.00 Each 3110.42 2986.01 2986.01 17 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Dsr-2.10.3 2.00 Each 498.76 478.81 957.62 16 Installation, Testing And Commissioning Of Ceiling Fan, Including Wiring The Down Rods Of Standard Length (Upto 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required Dsr 1.45 10.00 Each 257.74 247.43 2474.35 17 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Dsr 1.25 10.00 Each 280.55 269.33 2693.32 18 Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. Upto 450 Mm Sweep Dsr-1.50.1 7.00 Each 342.14 328.45 2299.17 19 Extra For Fixing The Louvers/ Shutters Complete With Frame For A Exhaust Fan Of All Sizes Dsr-1.51 7.00 Each 157.38 151.09 1057.62 20 Supply, Installation, Testing And Commissioning Of Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Metal( Aluminium Alloy) Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Steel/Al Body Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum As Below, 350 Rpm (Tolerance As Per Is : 374-2019), Thd (Total Harmonic Distortion) Less Than 10%, Suitable For Operation With Regulator For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 0C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Ceiling Fan Compliant To Is 374:2019 Fan I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. 9.2.3 10.00 Each 2075.64 1992.62 19926.18 21 Supplying And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cable 1100 Volts Grade At The Depth Of 750 Mm Bellow Ground Level Over A Cushion Of 75 Mm Thick Sand All Around And Protected With Burnt Bricks On Side And On Top .On Surface The Cable Run Shall Be Fixed On Ms Clamps Etc.Of Suitable Size Or As Directed By The Engineer-Incharge ,Complete In All Respect.The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. Following Size 10 Sqmm X 2 Core Mr 164.00 Rm 410.34 393.93 64603.77 22 Supply & Fixing Of 225/230Mm Sweep Ventilating (Light Duty) Exhaust Fan Complete With Metallic Blade (Steel Bird Guard Protector /Copper Motor For High Air Suction Performance /Capacitor Etc.), Noise Level : (45 - 50) Db, Power Consumption : 45 W, Rated Voltage : 230 V, Rated Frequency : 50 Hz, Motor Type : Normal Speed. Complete In All Respect. Mr 7.00 Each 1665.00 1598.40 11188.80 23 Cost For Murals Work 32.40 Sqm 5850.00 5616.00 181958.40 24 Cost For Solar Street Light With 7M Pole Complete 15.00 Nos 22600.00 21696.00 325440.00 25 Cost For C.C. Bench 12.00 Nos 10000.00 9600.00 115200.00 26 Cost For Dustbin 6.00 Nos 4500.00 4320.00 25920.00 1. Trenching In Ordinary Soil Up To A Depth Of 60 Cm Including Removal And Stacking Of Serviceable Materials And Then Disposing Of Surplus Soil, By Spreading And Neatly Levelling Within A Lead Of 50 M And Making Up The Trenched Area To Proper Levels By Filling With Earth Or Earth Mixed With Sludge Or / And Manure Before And After Flooding Trench With Water (Excluding Cost Of Imported Earth, Sludge Or Manure).. (Horti) 2.1 159.24 Cum 74.51 71.53 11389.98 2 Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 5 Km Lead Complete (Earth Measured In Stacks Will Be Reduced By 20% For Payment). (Horti) 2.2 79.62 Cum 491.88 472.21 37597.13 Horticulture 3 Supplying And Stacking At Site Dump Manure From Approved Source, Including Carriage Upto 5 Km Lead Complete (Manure Measured In Stacks Will Be Reduced By 8% For Payment) : Screened Through Sieve Of I.S. Designation 20 Mm (Horti) 2.4.1 106.16 Cum 242.46 232.76 24709.88 4 Spreading Of Sludge, Dump Manure And / Or Good Earth In Required Thickness As Per Direction Of Officer-In-Charge (Cost Of Sludge, Dump Manure And / Or Good Earth To Be Paid Separately). (Horti) 2.8 159.24 Cum 49.94 47.94 7634.64 5 Mixing Earth And Sludge Or Manure In The Required Proportion Specified Or Directed By The Officer-In-Charge (Horti) 2.9 159.24 Cum 34.87 33.47 5330.39 6 Grassing With Selection No.1 Grass Including Watering And Maintenance Of The Lawn For 30 Days Or More Till The Grass Forms A Thick Lawn, Free From Weeds And Fit For Mowing Including Supplying Good Earth, If Needed (The Good Earth Shall Be Paid For Separately). In Rows 5 Cm Apart In Both Directions. (Horti) 2.10.1 530.80 Sqm 16.89 16.21 8604.46 7 Providing And Displaying Of Aglaonema Silver Queen Having 30 Cm To 45 Cm. Ht. With 12 To 15 Leaves, Multi Suckers, Fresh And Healthy Leaves, Well Developed In 25 Cm Dia Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.8 60.00 Each 154.50 148.32 8899.22 (Horti) Dsr 3.8 8 Providing And Displaying Of Aglaonema Dove Variety Having Ht. 30 Cm To 45 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.4 75.00 Each 77.42 74.32 5574.03 (Horti) Dsr 3.4 9 Providing And Displaying Of Aglaonema Marentifolium Variety Having Ht. 23 Cm To 30 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy With Colorful Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.10 50.00 Each 64.54 61.96 3097.83 (Horti) Dsr 3.10 10 Providing And Displaying Of Chamaedorea Elegans Palm Having Ht. 60 Cm To 75 Cm, Well Developed With Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.26 50.00 Each 102.70 98.59 4929.51 (Horti) Dsr 3.26 11 Providing And Displaying Of Croton Baby Golden Variety Having Ht.30 Cm And Above, Well Developed With Full Of Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.28 150.00 Each 39.11 37.55 5632.42 (Horti) Dsr 3.28 12 Providing And Displaying Of Croton Golden (Broad Leaves) Having Ht. 60 Cm To 75 Cm With 3 To 4 Branches, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.32 150.00 Each 53.81 51.65 7748.01 (Horti) Dsr 3.32 13 Providing And Displaying Of Dieffenbachia Tropic-Snow Having Ht. 60 Cm & Above With 8 - 10 Leaves, Well Developed, Fresh & Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.40 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.40 14 Providing And Displaying Of Dieffenbachia Mosaic Having Ht. 30Cm To 45 Cm With 10-12 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.41 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.41 15 Providing And Displaying Dianthus In Different Colour Well Developed With Fresh & Healthy Foliage 30 Cm Ht., In Full Bloom With Stacking In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.29 50.00 Each 51.79 49.72 2486.05 (Horti) Dsr 4.29 16 Providing And Displaying Gazania Hybrid In Different Colour Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-Incharge. (Horti) 4.31 150.00 Each 61.63 59.16 8874.49 (Horti) Dsr 4.31 17 Providing And Displaying Gaillardia Double Hybrid Variety Well Developed 30 To 45 Cm Ht 20 To 30 Fresh & Healthy Flower With Green Painted Bamboo Stick In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.75 120.00 Each 51.85 49.78 5973.11 (Horti) Dsr 4.75 18 Providing And Stacking Of Plant Mogra Of Height 25 To 30 Cm., 2 To 3 Branch In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.88 100.00 Each 44.03 42.27 4226.60 (Horti) Dsr 4.88 19 Providing And Stacking Of Plant Canna Dwarf Of Height 25 To 30 Cm., 2 To 3 Suckers In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.89 100.00 Each 34.25 32.88 3287.87 (Horti) Dsr 4.89 20 Bush Rose In Different Colour 2 To 3 Healthy Branch 30 Cm And Above Ht. Well Developed With 8 Or More Flowers / Flower Buds In 20 Cm Earthen Pot /Plastic Pot As Per Direction Of The Officer-Incharge. (Horti) 4.90 100.00 Each 24.47 23.49 2349.13 (Horti) Dsr 4.90 21 Providing And Displaying Budded Rose (H.T. Variety) 3 To 4 Healthy Branch 30 Cm And Above Ht. Well Developed With One And Above Flower Plant In 20 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.91 100.00 Each 31.29 30.04 3003.96 (Horti) Dsr 4.91 22 Providing And Displaying Standard Rose (H.T. Variety) 3 To 4 Healthy Branch 90 Cm And Above Ht. Well Developed With One And Above Flowers In 25 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.93 75.00 Each 143.77 138.02 10351.28 (Horti) Dsr 4.93 23 Providing And Stacking Of Plumeria Rubra Of Height 120-150 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags As Per Direction Of The Officer-In-Charge. (Horti) 7.72 75.00 Each 381.60 366.34 27475.20 (Horti) Dsr 7.72 24 Providing And Stacking Of Polyalthia Longifolia (Ashok) Of Height 180-195 Cm. In Gunny Bag Of Size 30 Cm As Per Direction Of The Officer-Incharge. (Horti) 7.75 75.00 Each 95.40 91.58 6868.80 (Horti) Dsr 7.75 25 Providing And Stacking Of Saraca Indica (Sita Ashok) Of Height 105-120 Cm. In Big Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge. (Horti) 7.80 75.00 Each 76.32 73.27 5495.04 (Horti) Dsr 7.80 26 Providing And Stacking Of Terminalia Arjuna Of Height 150-165 Cm. In Big Polybags Of Size 25 Cm As Per Direction Of The Officerin-Charge. (Horti) 7.88 75.00 Each 57.24 54.95 4121.28 (Horti) Dsr 7.88 27 Providing And Stacking Of Calliandra, Emarginata Of Height 45-60 Cm. In Earthen Pot Of Size 20 Cm As Per Direction Of The Officer-Incharge. (Horti) 8.5 150.00 Each 33.39 32.05 4808.16 (Horti) Dsr 8.5 28 Providing And Stacking Of Nerium Oleander (Kaner) Of Height 60- 75 Cm. With 5-6 Branches In Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
25.
Rural Development #11320140 AOC
Construction Of Anganwadi In Ward 1 Pelakkatupayyur , Laying And Jointing Pvc Pipe. Heading , 0293-Stone Aggregate(Single Size): 40 Mm Nominal Size , 0295-Stone Aggregate(Single Size):20 Mm Nominal Size , 0297-Stone Aggregate(Single Size): 10 Mm Nominal Size , 0367-Portland Cement , 0587-Chromium Plated Brass Screws 30 Mm , 0588-Chromium Plated Brass Screws 25 Mm , 0595-Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm , 0597-Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x1.50 Mm , 0637-Bright Finished Or Black Enameled Mild Steel Screws 40 Mm , 0640-Bright Finished Or Black Enameled Mild Steel Screws 20 Mm , 0698-Anodised Aluminium Tower Bolt (Barrel Type)300X10 Mm , 0808-Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , 0809-Exterior Primer , 0823-Pink Primer (For Wood) , 0833-Synthetic Enamel Paint In Black Or Chocolate Shade , 0835-Plastic Emulsion Paint , 0982-Coarse Sand (Zone Iii) , 0983-Fine Sand (Zone Iv) , 1002-Mild Steel Round Bar 12 Mm Dia And Below , 1003-Mild Steel Round Bar Above 12 Mm Dia , 1005-Twisted Steel/Deformed Bars , 1007-Structural Steel Such As Tees, Angles, Channels And R.S. Joists , 1008-Flats Up To 10 Mm In Thickness , 1157-Stone For Masonry Work , 1189-Second Class Teak Wood In Scantling , 1197-Second Class Kail Wood In Scantling , 1198-Second Class Kail Wood In Planks , 1215-Welding By Electric Plant , 1309-C.I. Bracket For Wash Basin And Sinks , 1342-Brass Stop-Cock 15 Mm Dia , 1649-Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , 1876-Black Plastic Seat (Soild) With Lid C.P.Brass Hinges And Rubber Buffers , 1885-15 Mm C.P.Brass Tap , 1927-Brass Full Way Valve With C.I. Wheel (Screwed End) 25 Mm Dia , 1951-C.P. Brass Waste 32 Mm , 1955-Vitreous China Pedestal Type Wate Closet , 2406-Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , 2447-Hollock Ballies 125 Mm Diameter , 3229-Vitreous China Flat Back Wash Basin 550X400 Mm , 4009-Mild Steel Tubes Hot Finished Welded Type , 4202-Red Oxide Zinc Chromate Primer , 7048-Rawl Plug 50 Mm (Designation 10 Nos) , 7103-Stainless Steel Kitchen Sink - Without Drain Board 470X420 Mm Bowl Depth 178 Mm , 7113-Rectangular Shape 453X357 Mm Mirror With Plastic Moulded Frame , 7116-Hard Board 6 Mm Thick , 7117-Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I/C Pvc Waste Fittings , 7261-C.P. Brass Angle Valve 15 Mm , 7319-Wall Form Panel 1250X500 Mm , 7326-Corner Angle 45X45x5 Mm 1.50 M Long , 7327-100 Mm Channel Shoulder 2.5 M Long , 7328-Double Clip (Bridge Clip) , 7329-Single Clip , 7330-M.S. Tube 40 Mm Dia , 7331-Wall Form Panel 1250X450xmm , 7332-Corner Angle 45X45x5 Mm 2.50 Long , 7333-Column Clamp 450X1070 Mm , 7334-Prop 2 M (2-3.5M) , 7342-Adjustable Span Eso+Si (2.35-3.40) , 7343-Adjustable Telescopic Prop 3 M (2.02-3.75M) , 7344-Beam Clamp 300-380 Mm (450-1070 Mm) , 7358-Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , 7400-15 Mm Ptmt Bib Cock , 7506-Ptmt - Towel Rail (600 Mm) , 7509-Ptmt - Soap Dish/Holder 138X102x75 Mm , 7800-Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , 7801-Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , 8014-Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile , 8100-Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm , 8505-Acrylic Exterior Paint , 8620-Vitrified Floor Tile 50X50 Cm , 8621-Vitrified Floor Tile 60X60 Cm , 8735-35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished (Matt Finished) , Mr10-Anjili Wood Scantls , Mr11-Anjili Wood Planks , Mr18-200 Mm Aluminium Aldrop , Mr22-Iron Hooks & Eyes 100 Mm , Mr2-Solid Blocks Of Size 30X20x20cm , Mr41-Pvc Pipe 20 Mm Outer Dia 10 Kfg/Cm2 , Mr43-Pvc Pipe 25 Mm Outer Dia. 10Kgf Cm2 , Mr44-Pvc Pipe 32 Mm Outer Dia. 10Kgf/Cm2 , Mr46-Pvc Pipe 40 Mm Outer Dia. 10Kgf/Cm2 , Mr49-Pvc Pipe 50 Mm Outer Dia.6Kgf/Cm2 , Mr4-Solid Blocks Of Size 30X20x15cm , Mr50-Pvc Pipe 63 Mm Outer Dia . 6Kgf/Cm2 , Mr55-Pvc Pipe 110 Mm Outer Dia. 4Kgf/Cm2 , Mr57-Pvc Elbow 63 Mm Dia , Mr58-Pvc 45 Degree Elbow 63 Mm Dia , Mr5-Solid Blocks Of Size 40X20x10cm , Mr60-Pvc Bend 63 Mm Dia , Mr61-Pvc Tee 63X63x63 Mm Dia , Mr63-Pvc Vent Cowl 63 Mm Dia , Mr64-Pvc End Cap 63 Mm Dia , Mr66-Pvc Reducer 63X50 Mm Dia
Contract Date: Jun 19, 2026 Contract Value : 10.76 Lakh
Local Bodies No of Bidders 2
26.
Rural Development #11320139 AOC
Construction Of Anganwadi In Ward 16 , Anganwadi , 1157 Stone For Masonry Work , 367 Portland Cement , 982 Coarse Sand (Zone Iii) , 295 Stone Aggregate(Single Size):20 Mm Nominal Size , 297 Stone Aggregate(Single Size): 10 Mm Nominal Size , Mr2 Solid Blocks Of Size 30X20x20cm , Mr4 Solid Blocks Of Size 30X20x15cm , Mr5 Solid Blocks Of Size 40X20x10cm , 1005 Twisted Steel/Deformed Bars , 1198 Second Class Kail Wood In Planks , 1197Second Class Kail Wood In Scantling , 1007 Structural Steel Such As Tees, Angles, Channels And R.S. Joists , 4202 Red Oxide Zinc Chromate Primer , 7343 Adjustable Telescopic Prop 3 M (2.02-3.75M) , 7344 Beam Clamp 300-380 Mm (450-1070 Mm) , 2447 Hollock Ballies 125 Mm Diameter , 7342 Adjustable Span Eso+Si (2.35-3.40) , 7331 Wall Form Panel 1250X450xmm , 7332 Corner Angle 45X45x5 Mm 2.50 Long , 7333 Column Clamp 450X1070 Mm , 7334 Prop 2 M (2-3.5M) , 7319 Wall Form Panel 1250X500 Mm , 7326 Corner Angle 45X45x5 Mm 1.50 M Long , 7327100 Mm Channel Shoulder 2.5 M Long , 7328 Double Clip (Bridge Clip) , 7329 Single Clip , 7330 M.S. Tube 40 Mm Dia , 293 Stone Aggregate(Single Size): 40 Mm Nominal Size , Mr10 Anjili Wood Scantls , 595Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm , 597 Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x1.50 Mm , 637 Bright Finished Or Black Enameled Mild Steel Screws 40 Mm , 640 Bright Finished Or Black Enameled Mild Steel Screws 20 Mm , Mr11 Anjili Wood Planks , 2406 Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , 1003 Mild Steel Round Bar Above 12 Mm Dia , 1008 Flats Up To 10 Mm In Thickness , 1002 Mild Steel Round Bar 12 Mm Dia And Below , 1215 Welding By Electric Plant , 4009 Mild Steel Tubes Hot Finished Welded Type , 801 Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile , 873535 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished (Matt Finished) , 8100 Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm , 983 Fine Sand (Zone Iv) , 808Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , 8505 Acrylic Exterior Paint , 809 Exterior Primer , 835 Plastic Emulsion Paint , 823 Pink Primer (For Wood) , 833 Synthetic Enamel Paint In Black Or Chocolate Shade , 8621 Vitrified Floor Tile 60X60 Cm , 8620 Vitrified Floor Tile 50X50 Cm , 7800 Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black , 7801 Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , 1649 Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Mr18 200 Mm Aluminium Aldrop , Mr22 Iron Hooks & Eyes 100 Mm , 698Anodised Aluminium Tower Bolt (Barrel Type)300X10 Mm , 587 Chromium Plated Brass Screws 30 Mm , 3229 Vitreous China Flat Back Wash Basin 550X400 Mm , 188515 Mm C.P.Brass Tap , 1951C.P. Brass Waste 32 Mm , 1309C.I. Bracket For Wash Basin And Sinks , 7103Stainless Steel Kitchen Sink - Without Drain Board 470X420 Mm Bowl Depth 178 Mm , 7506Ptmt - Towel Rail (600 Mm) , 1189Second Class Teak Wood In Scantling , 588Chromium Plated Brass Screws 25 Mm , 7113Rectangular Shape 453X357 Mm Mirror With Plastic Moulded Frame , 7116Hard Board 6 Mm Thick , 7048 Rawl Plug 50 Mm (Designation 10 Nos) , 1342 Brass Stop-Cock 15 Mm Dia , 1927 Brass Full Way Valve With C.I. Wheel (Screwed End) 25 Mm Dia , 7261 C.P. Brass Angle Valve 15 Mm , 7509 Ptmt - Soap Dish/Holder 138X102x75 Mm , 1876 Black Plastic Seat (Soild) With Lid C.P.Brass Hinges And Rubber Buffers , 1955 Vitreous China Pedestal Type Wate Closet , 7358Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , Mr46pvc Pipe 40 Mm Outer Dia. 10Kgf/Cm2 , Mr57 Pvc Elbow 63 Mm Dia , 7117 Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I/C Pvc Waste Fittings , Mr49 Pvc Pipe 50 Mm Outer Dia.6Kgf/Cm2 , Mr55 Pvc Pipe 110 Mm Outer Dia. 4Kgf/Cm2 , Mr43 Pvc Pipe 25 Mm Outer Dia. 10Kgf Cm2 , Mr50 Pvc Pipe 63 Mm Outer Dia . 6Kgf/Cm2 , Mr41 Pvc Pipe 20 Mm Outer Dia 10 Kfg/Cm2 , Mr44 Pvc Pipe 32 Mm Outer Dia. 10Kgf/Cm2 , Mr60 Pvc Bend 63 Mm Dia , Mr61 Pvc Tee 63X63x63 Mm Dia , Mr64 Pvc End Cap 63 Mm Dia , Mr63 Pvc Vent Cowl 63 Mm Dia , Mr58 Pvc 45 Degree Elbow 63 Mm Dia , Mr66 Pvc Reducer 63X50 Mm Dia , 7400 15 Mm Ptmt Bib Cock
Contract Date: Jun 19, 2026 Contract Value : 8.90 Lakh
Local Bodies No of Bidders 2
27.
Defence #11315637 Technical Bid
Tender for M&L For Taking Up Or Down Old Rusted Gi Tubings And Connections From Trenches Or From Walls/Ceilings For The 100 Mm Bore. , All As Per Item No -1 Above But 80 Mm Bore. , All As Per Item No -1 Above But 50 Mm Bore. , All As Per Item No -1 Above But 40 Mm Bore. , All As Per Item No -1 Above But 25 Mm Bore. , Supply And Lay Pipes Galvanised Gi Tubing 100 Mm Bore Medium Grade In Trenches And Connection In Old Or New Position Including Fitting Like Socket / Union / Tee / Reducer Nipple Etc Complete All As Directed. , All As Per Item No- 6 Above But 80 Mm Bore. , All As Per Item No- 6 Above But 50 Mm Bore. , All As Per Item No-6 Above But 40 Mm Bore. , All As Per Item No- 6 Above But 25 Mm Bore. , Taking Down And Refixing Old Steel Tubing After Cleaning And Connections In New Or Old Position (Walls, Ceiling,Floors) Including Earth Work And Fittings As Reqd At Site Of Size 100 Or 80 Mm Bore. , All As Per Item No -11 Above But Size 40 Or 50 Mm Bore. , All As Per Item No -11 Above But Size 25 Or 32 Mm Bore. , All As Per Item No -11 Above But Size 20 Mm Bore. , Cutting Existing Steel Tubing 100 Or 80 Mm Bore For Alterations Or Additions (Each Cut Measured) , All As Per Item No -15 Above But 40 Or 50 Mm Bore. , All As Per Item No -15 Above But 25 Or 32 Mm Bore. , Exacavation In Trenches , N.Exc 1.5 M Wide And N.Exc 1.5 M In Depth For Laying Of Pipes Or For Run Lead Joint And Getting Out In Hard/Dense Soil. , Returning, Filling In Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25Cm. , Removing Excavated Soil N.Exe 50Mtr & Depositing Where Directed At A Level N.Exe 1.5M Above The Starting Point. , Supply And Fix In Repair Sluice Valve 100 Mm Bore Of Cast Iron Body With Flanged Ends Duly Drilled Isi Marked As Per Is (14846-2000) Pn-1.6 With Spindle And Check Nut Including Operating Wheel Etc. And Fixed With New Bolts, Nuts, Washers And Rubber Insertion Packing Complete All As Specified And Directed. , All As Per Item No -21 Above But 80 Mm Bore. , Taking Down The Old Unserviceable Spindle From Sluice Valve 150 Mm Bore And Fixing With New Spindle As Per The Existing Size And Shape Of Manufactures Including Replacement Of Connected Check Nuts Washers, Rubber Gasket , And Gland Packing To Arrest Any Leakage And And Reassembling Complete For Smooth Functioning Of Sluice Valve All As Directed For Following Sizes , All As Per Item No -23 Above But 100 Mm Bore. , All As Per Item No -23 Above But 80 Mm Bore. , Supply And Fix In Repair Gun Metal Gate Valve With Iron Wheel Head Screwed Both Ends For Iron Pipe And Fixed Size 50 Mm Dia. , All As Per Item No -26 Above But 40 Mm Bore. , All As Per Item No -26 Above But 25 Mm Bore. , Dismantling Of Old Valve Chamber Of Any Size Including Taking Out Rusted Ms Sheet With Angle Iron Frame All As Directed At Site. , M & L For Construction Of Valve Chamber Of Size 900X900x900 Mm Including Necessary Earth Work Excavation Plain Cement Concrete 1:4:8 In Foundation Type D2 Using 40 Mm Grade Stone Aggregate, Brick Wall In Cm 1:4, Plain Cement Concrete 1:2:4 Type B1 For Copping, 15 Mm Thick Rendering In Cm 1:4 Including Provision Of Ms Sheet Cover 3.0Mm Thick With Ms Angle Frame 25X25x3mm All Round And At Diagnols Of Size 40 X 40 X 6Mm And Also Ms Plate Welded To Ms Angle, Embedded In Concrete With Suitable Hinges And Locking Arrangement, Including Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Necessary Excavation Earth Work Etc, All As Specified And As Directed. , All As Per Item No -30 Above But 600X600x600 Mm. , M&L Cutting The Road Hard Standing & Making Good Surface With Plain Cement Concrete 1:3:6 C-2 Type Using 40 Mm Graded Stone Aggregate & Removing The To Distance N.Exe 50Mtr All As Specified. , M&L For Stone Masonry For Walling Of Random Rubble, Uncaused, Well Bonded, Built In Cement Mortar 1:4 For Construction Of Thrust Block For The Support Of Water Supply Pipe Line. , M&L For Arrresting Of Leakge Of Pipe Line Of Size Upto 80 Mm Gi/Ppr Pipe Line By Using Of Short Length Of Gi/Ppr Pipe,Welding, Including All Fittings. Note:-(I) The Rate Included All Gi/Ppr Fittings,Nut,Bolts Etc (Ii) Earth Work Shall Be Measured And Paid Seperately (Iii) Gi/Ppr Pipe Will Be Mesured And Paid Seperately , S&F 3-Layer Pp-R P O L Y P R O P Y L E N E Random Copolymer) Pipes 110 Mm Dia Sdr 11 Uv, Pn 10 Stablised And A N T I M I C R O B I A L Welded Having Thermal Stability For Hot & Cold Water Supply Including All Pp-R Plain & Brass Threaded P O L Y P R O P Y L E N E Random Fittings Fixed Complete To Walls, Ceilings In Floors Or Laid In Trenches Etc.Including Taking Down Of Old Pipe. , All As Per Item No -35 Above But 90 Mm Dia. , All As Per Item No -35 Above But 75 Mm Dia. , All As Per Item No -35 Above But 63 Mm Dia. , All As Per Item No- 35 Above But 50 Mm Dia. , All As Per Item No -35 Above But 40 Mm Dia. , All As Per Item No- 35 Above But 32 Mm Dia. , All As Per Item No -35 Above But 25 Mm Dia. , M&L For Making Connection Of Pp-R Distribution Branch 50 To 75 Mm With Pp-R Main Of Following Sizes By Providing And Fixing Tee Including Cutting And Making Fusion Joint Etc. , All As Per Item No -43 Above But 16 To 40 Mm Dia. , S&F Pp-R Gate Valves (Brass Insert) 63 Mm As Per Requirement Of The Site. , All As Per Item No- 45 Above But 50 Mm Dia. , All As Per Item No -45 Above But 40 Mm Dia. , All As Per Item No- 46 Above But 32 Mm Dia. , All As Per Item No -45 Above But 25 Mm Dia. , M&L For Disconnecting Existing Tanks, Setting Aside (Or Lowering If Required) For Repairs, Cleaning, Etc. And Hoisting If Required & Cleaning And Removing All Scale And Dirt, Etc, From Tanks And From Mouths Of Circulating Pipes,Reconnecting And Re-Fixing In Position And Etc Of Exc 250 Ltr But Not Exc 500 Ltrs , All As Per Item No -50 Above But Exc 500 Ltrs But Not Exc 1000 Ltrs , All As Per Item No -50 Above But Exc 1000 Ltrs But Not Exc 2000 Ltrs , S & F In Repair Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) 500 Ltr Capacity Hoisted And Fixed In Position All As Specified In Ssr Part I Including Taking Down Old One. , All As Per Item No- 53 Above But 750 Ltrs Capacity. , All As Per Item No- 53 Above But 1000 Ltrs Capacity. , All As Per Item No -53 Above But 2000 Ltrs Capacity. , S&F Ball Valves High Pressure Of Ptmt 15 Mm Bore With Epoxy Coated Aluminium Rod & Highdensity Plastic Ball Screwed For Iron Pipe And Fixed. (Minimum Weight 15Mm-142Gms/ 2 0 M M - 2 1 0 G M S . /25Mm-455Gms / 40Mm - 690 Gms) , All As Per Item No -57 Above But 20 Mm Bore. , All As Per Item No -57 Above But 25 Mm Bore. , All As Per Item No -57 Above But 40 Mm Bore. , M&L For Cleaning Of Of Under Ground/Above Ground Water Sump ,Sadmention Tank,Raw Water Tanks By Scraping The Internal Surface With Steel Wire Brushes,Pumping Out Water Up To Bottom Level Complete Drain Out Removing Slit/Debris Descaling With Soloution And Applying Two Coats Of Lime White Wash Internally As Diorested By The Engr In Charge ,Cleaning The Internal Surface Of The Tanks To The Complete Stasification And As Directed By Engr In Charge For The 20000 To 40000 Ltrs Capacity. , M&L For Cleaning Of Of Under Ground/Above Ground Water Sump ,Sadmention Tank,Raw Water Tanks By Scraping The Internal Surface With Steel Wire Brushes,Pumping Out Water Up To Bottom Level Complete Drain Out Removing Slit/Debris Descaling With Soloution And Applying Two Coats Of Lime White Wash Internally As Diorested By The Engr In Charge ,Cleaning The Internal Surface Of The Tanks To The Complete Stasification And As Directed By Engr In Charge For The 45000 To 80000 Ltrs Capacity. , S&F Mechnical Joint Suitable For Di/Ci/Gi Pipe Of 80 Mm Dia. , S&F Mechnical Joint Suitable For Di/Ci/Gi Pipe Of 100 Mm Dia. , S&F Mechnical Joint Suitable For Di/Ci/Gi Pipe Of 150 Mm Dia. , Taking Down Old Serviceable Ppr Pipe Of Any Size Or Rating (80 Mm To 110 Mm) From Site After Cleaning Of Pipe Line / Cutting Repair Of Water Leakage And Refixing At Site Including Gi / Ppr Fitting As Required At Site All As Directed And Specified By Engr In Charge. , Taking Down Old Serviceable Ppr Pipe Of Any Size Or Rating (25 Mm To 65 Mm) From Site After Cleaning Of Pipe Line / Cutting Repair Of Water Leakage And Refixing At Site Including Gi / Ppr Fitting As Required At Site All As Directed And Specified By Engr In Charge. , S & F In Repairs Valve Pit Chamber Cover Of Ms Sheet Cover 3 Mm Thick With Handle And Locking Arrangement Including Painting With Two Coats Of Synthetic Enamelled Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed. , M & L For Servicing Of Monoblock Pump Sets 5 To 7.5 Hp Multistage Self Priming Including Painting With One Coat Of Synthetic Enamel Paint And Replacing Of Following Parts All As Directed :- (A) Bearing Of Pump (B) Suction Strainer (C) Worn Out Nuts And Bolts , M & L For Rewinding The Monoblock Motor With Super Enamelled Wire Of Existing Gauge And Weight In The Coil Terms With Other Materials For 3 Phase 415 Volts, 50Hz After Cutting Replacing Of Warn-Out Bolts And Nuts Including Changing Of Bearings All As Directed Of Capacity Upto 5 Hp. Note : Repairing & Transporting Charges Are Including Rates. , S & F In Repair Gi Flange 80 -100 Mm Dia With All Fixing Arrangement In Gi Pipe Line All As Directed And As Specified By Engr In Charge. , S & F In Repair Ms Flange 80 -100 Mm Dia With All Fixing Arrangement In Existing Pipe Line All As Directed And As Specified By Engr In Charge. , S & F In Repair Ms Flange 150 Mm Dia With All Fixing Arrangement In Existing Pipe Line All As Directed And As Specified By Engr In Charge. , Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning,Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm,In Hard/Dense Soil. , M&L For Providing Plain Cement Concrete 1:4:8 Type D2 Using 40Mm Graded Stone Agrigate As Foundations,Filling And Mass Concrete Complete All As Specified Directed. , Note : Above Work / Item Will Be Operated / Executed As Per Planning / Breake Down And User Requirment Basis,So Contractor Will Depute Their Man Power As Per User Requirment/Breake Down Basis As Directed By Je/Engr In Charge On Telephoncally . No Extra Cost Will Provided To The Contractor.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
28.
Public Administrative Department #11311364 Technical Bid
Tender for Rate For Construction Items/Materials Of Labpur Development Blocks Jurisdiction Of Fy-2026-27 (Including All Taxes). , Laying And Jointing Pvc Pipe. Heading , Welding By Electric Plant , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller- 8 To 10 Tonne , Vibrator (Needle Type 40 Mm) , Surface Vibrator , Water Tanker 5000 Ltr. Capacity , 1St Class Picked Jhama Bricks(Traditional) , 1St Class Traditional Bricks (Kiln Burnt) , Modular Fly Ash Bricks , Fly Ash Bricks(Traditional) , Coloured Inter Locking cement concrete Paver Block , Moorum , Fine Sand , Medium Sand , Coarse Sand , Coarse Sand , Portland Cement , White Cement , Water Proofing Materials , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Grade 1 Stone Metal 63 Mm To 45 Mm , Polythene Sheet (150 Gm Per Sqm) , Thermocol 12.5 Mm Thick. , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Vitrified Floor Tile 60X60 Cm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , Bitumen Vg-30 , Bitumen Emulsion , Coal Tar , Diesel Oil , Sal Silliguri -In/C Labour Cost , Sal Malaysia-In/C Labour Cost , Neem Wood -In/C Labour Cost , Other Local Wood -In/C Labour Cost , Ordinary Teak Wood -In/C Labour Cost , Sisu/Gamar Wood -In/C Labour Cost , Local Sal Wood -In/C Labour Cost , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Malayasia Sal Cleat , Wood Dust , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Supplying Solid Flush Type Doors Of Commercial Quality , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Anodised Aluminium Hanging Type Door Stopper , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Ms Integrated Grill For Steel Window And Ventillator , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay(Straight Peg Type)300Mm Not Less Than 0.33 Kg , Mirror Of Superior Make Glass 60X45 Cm , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging , Fitting & Fixing Circular Corrugated Aluminium Sheet , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , G I Wire , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Fan Hook , Reinforced Cement Concrete Pipe 600 Mm Dia Np- 3 Spigot , Reinforced Cement Concrete Pipe 900 Mm Dia Np - 3 Spigot , Reinforced Cement Concrete Pipe 1000 Mm Dia Np -3 Spigot , Reinforced Cement Concrete Pipe 1200 Mm Dia Np - 3 Spigot , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes (Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , 32 Mm Dia Polythene Flush Pipe , H.P. Or L.P. Ball Valve With Polythene Floats: 15 Mm Dia , H.P. Or L.P. Ball Valve With Polythene Floats: 20 Mm Dia , H.P. Or L.P. Ball Valve With Polythene Floats: 25 Mm Dia , 20 Mm Dia Gunmetal Gate Valve With Wheel , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Slotted Cowl (Terminal Guard) 75 Mm Dia , Slotted Cowl (Terminal Guard) 100 Mm Dia , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Upvc Single Equal Tee (Without Door) 75X75x75 Mm , Upvc Single Equal Tee (Without Door) 110X110x110 Mm , Upvc Bend 87.50, 75 Mm Bend , Upvcbend 87.50, 110 Mm Bend , Upvc Pipe Clip 75 Mm Bend , Upvc Pipe Clip 110 Mm Bend , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , C.P. Brass Stop Cock (Concealed) 15 Mm , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm Dia , Supplying, Fitting And Fixing Pillar Cock Of Approved Make Cp Pillar Cock - 15 Mm Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand. , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , C.P. Over Brass Waste Fittings 32 Mm , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Towel Rail (Cp Over Brass )- 600 Mm , Shower Rose C.P Brass For 15 To 20 Mm Intel 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Intel 150 Mm Dia , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Foot Rests 250X125x25 Mm , Vitreous China Pedestal For Wash Basin , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Ci Manhole Cover 450 Mm Dia , C.I. Grating 100X100 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Adhesive Solvent Cement , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Acrylic Exterior Paint , Coal Tarring , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Loading, Unloading And Stacking By Manual Means Of Steel , Loading, Unloading & Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced Cement Pipes) 600, 700, 750 & 800 Mm Dia , Loading, Unloading & Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced Cement Pipes) 900 Mm Dia , Loading, Unloading And Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced) Cement Pipes 1000, 1100 & 1200 Mm Dia , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Wire Mesh (Rabbit) , Sausage Wire Net , 1.5 Mm Thick Ms Sheet , Galvanised Steel Plain Sheets , Galvanised Steel Corrugated Sheets , Stainless Steel Bolts /Square Bar And Plates , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , Collapsible Gate , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Cowdung , Empty Gunny Bag , Open Weave Jute Geo-Textile (Jgt) Having Overall Weight Of 500 Gm Per Sq. M Thickness 5 Mm, Width 1220 Mm, Tensile Strength 10 Kn/M X 7.50 Kn/M Including Lapping, Staples Or Nails, Testing , Woven Jute Geo-Textile (Jgt) 724 Gm/Sqm Possessing Tensile Strength Of 25 Kn/M Including Lapping, Staples Or Nails, Testing , Geotextile 120 Gram Per Sqm Membrane
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
West Bengal View Result →
30.
Educational and Research Institute #11307517 Technical Bid
Tender For Ambedkar Gramam Project For Sc Unnathy Pookkunnimala- 1 1) Anganwadi-Civil Works-Ground Floor 2 15.9.2 Demolishing Stone Rubble Masonry Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer -In- Charges:In Cement Mortar 3 15.7.4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge.In Cement Mortar 4 15.2.2 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In-Charge.Nominal Concrete 1:4:8 Or Leaner Mix ( Including Equivalent Design Mix) 5 15.19 Dismantling Steel Work Manually / By Mechanical Means In Built Up Sections Without Dismembering And Stacking Within 50 Metres Lead As Per Directions Of Engineer -In- Charge. 6 15.28.1 Dismantling Roofing Including Ridges, Hips, Velleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of :G.S. Sheet 7 15.13.1 Taking Out Doors, Windows And Clerestory Window Shutters (Steel Or Wood ) Including Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below 8 2.6.1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge.All Kinds Of Soil 9 4.1.8 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) 10 5.9.1 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Foundations, Footings, Bases Of Columns, Etc For Mass Concrete 11 5.9.5 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 12 5.9.6 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts 13 5.1.2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:1:5:3 (1 Cement 1.5 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 14 5.2.2 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up Tot Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 15 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Suspended Floors, Roofs, Landings, Balconies And Access Platform 16 5.3 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone Iii) Derived From Natural Sources: 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). 17 5.22.6 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 18 2.25 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundation Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Up To 1.5 M. 19 50.6.1.2 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20X20Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand) Etc Complete. 20 13.7.1 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix:1:3 ( 1 Cement : 3 Fine Sand) 21 13.1.1 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand) 22 50.9.1.1 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately), Using Good Quality Anjili Wood /Jack Wood 23 50.9.2.1 Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws, Excluding Panelling Which Will Bepaid For Separately, All Complete As Per Direction Of Engineerin - Charge Using Anjili/ Jack Wood 24 50.9.6.1 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. Using Anjili Wood / Jack Wood 30 Mm Thick Shutters 25 14.29 Providing And Fixing M.S. Round Or Squre Bars With M.S. Flats At Required Spacing In Wooden Frames Of Windows And Clerestory Windows. 26 10.27.5 Providing And Fixing Carbon Steel Galvanised ( Minimum Coating 5 Micron) Dash Fastener Of 10 Mm Dia Double Threaded 6.8 Grade (Yield Strength 480 N/Mm2), Counter Sunk Head, Comprising Of 10 M Dia Polyamide P A 6 Grade Sleeve, Including Drilling Of Hole In Frame, Concrete/Masonry, Etc. As Per Direction Of Engineer-In-Charge.10X 160 Mm 27 9.76 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 28 9.92.1 Providing And Fixing Chromium Plated Brass Handles With Necessary Screws Etc. Complete:125 Mm 29 9.74.3 Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Necessary Screws Etc. Complete:150X10 Mm 30 9.83 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 31 Od123879/2025-2026 Providing And Fixing Frp (Fibre Reinforced Polymer) Door Shutter Of Size 90Cm And 28-30Mm Thickness With Frame 110Mm Thickness With Necessary Fittings Like Hinges, Cost Index (Place) : Kollam, Gst : 18% Printed On 2026-03-17 13:56:12.13 4 Including All Materials And Labour Charge Etc As Per The Direction Of Engineer In Charge 32 Od123885/2025-2026 Providing And Fixing Frp (Fibre Reinforced Polymer) Door Shutter Of Size 80Cm And 28-30Mm Thickness With Frame 110Mm Thickness With Necessary Fittings Like Hinges, Tower Bolts, Handles, Mortice/Cylindrical Locks And All Other Accessories Etc. Complete Including All Materials And Labour Charge Etc As Per The Direction Of Engineer In Charge 33 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600 X 600 Mm. 34 11.46.2 Providing And Laying Vitrified Tiles Indifferent Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete.Size Of Tile 600X600 Mm 35 11.37 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete 36 8.31 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In- Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 37 11.16.1 Precast Terrazo Tiles 22 Mm Thick With Graded Marble Chips Of Size Upto 12Mm, Laid In Floors, And Landings, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles Including Rubbing And Polishing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) :Light Shade Pigment Using White Cement 38 8.2.2.2 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror, Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations, Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels.Area Of Slab Over 0.50 Sqm 39 8.3.2 Providing Edge Moulding To 18 Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer -In-Charge.Granite Work 40 13.80 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 41 13.43.1 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 42 13.60.1 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 43 13.47.1 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) 44 13.85.1 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound) Content.With Ready Mixed Pink Or Grey Primer On Wood Work (Hard And Soft Wood ) Having Voc Content Less Than 50 Grams/ Litre 45 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 46 10.28 Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) 47 Od134882/2025-2026 Supplying And Fixing Anganwadi/Library/Vignjaanwadi Name Board With Emblem Using Acrylic Sheet Base With Reflective Type Sticker As Per Required Shade And Color Etc Complete. Size Of Board 3.00Mx 0.60M 48 Od134893/2025-2026 Providing And Fixing Anganwadi/Library/Vignjaanwadi -Foundation Stone/Inauguration Stone Using Granite Of Size 70.00X135.00 Cm ,18Mm Thick With Writing Letters In Golden Colour Including Of All Material And Labour Charges Etc. Complete As Per The Directions Of Engineer-In-Charge. 49 2.1.1 Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5M In Width As Well As 10 Sqm On Plan Including Disposal Of Excavated Earth Up To 50 M And Lift Up To 1.5 M, Disposed Soil To Be Levelled And Neatly Dressed:All Kinds Of Soil 50 16.68 Providing And Laying 60 Mm Thick Factory Made Cement Concrete Interlocking Paver Block Of M - 30 Grade Made By Block Making Machine With Strong Vibratory Compaction, Of Approved Size, Design & Shape, Laid In Required Colour And Pattern Over And Including 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. 51 50.10.1 Steel Work In Built Up G I Tubular ( Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 52 50.10.2 Steel Work For Purlin/Single Section With G I Pipes Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 53 12.50 Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+0.05%), Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Screws Of Size (5.5X55Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 54 12.51.1 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screwscomplete :Ridges Plain (500-600 Mm) 55 Od141946/2025-2026 Providing And Fixing 8 Upvc Aqua Pathy ( Gutter) With M.S Clamp All Complete As Per Direction Of Engineer-In-Charge. 56 1)Vignjaanwadi,Library Cum Reading Room-First Floor 57 5.9.6 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts 58 5.9.5 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 59 5.2.2 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Up Tot Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 60 5.9.3 Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Suspended Floors, Roofs, Landings, Balconies And Access Platform 61 5.3 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone Iii) Derived From Natural Sources: 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). 62 5.22.6 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 63 50.6.1.2 Solid Block Masonry Using Pre Cast Solid Blocks (Factory Made) Of Size 40X20X20Cm Or Nearest Available Size Confirming To Is 2185 Part I Of 1979 For Super Structure Up To Floor Two Level Thickness 20Cm And Above In: Cm 1:6 ( 1 Cement: 6 Coarse Sand) Etc Complete. 64 13.7.1 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix:1:3 ( 1 Cement : 3 Fine Sand) 65 13.1.1 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand) 66 13.4.1 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Coarse Sand) 67 50.9.1.1 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately), Using Good Quality Anjili Wood /Jack Wood 68 50.9.2.1 Providing And Fixing Paneled And Glazed Shutters For Doors, Windows And Clerestory Windows, 35 Mm Thick Shutters Including Isi Marked M.S. Pressed Butt Hinges Bright Cost Index (Place) : Kollam, Gst : 18% Printed On 2026-03-17 13:56:12.13 9 Paid For Separately, All Complete As Per Direction Of Engineerin - Charge Using Anjili/ Jack Wood 69 50.9.6.1 Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes Including Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size With Necessary Screws. Using Anjili Wood / Jack Wood 30 Mm Thick Shutters 70 14.29 Providing And Fixing M.S. Round Or Squre Bars With M.S. Flats At Required Spacing In Wooden Frames Of Windows And Clerestory Windows. 71 10.27.5 Providing And Fixing Carbon Steel Galvanised ( Minimum Coating 5 Micron) Dash Fastener Of 10 Mm Dia Double Threaded 6.8 Grade (Yield Strength 480 N/Mm2), Counter Sunk Head, Comprising Of 10 M Dia Polyamide P A 6 Grade Sleeve, Including Drilling Of Hole In Frame, Concrete/Masonry, Etc. As Per Direction Of Engineer-In-Charge.10X 160 Mm 72 9.76 Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. 73 9.92.1 Providing And Fixing Chromium Plated Brass Handles With Necessary Screws Etc. Complete:125 Mm 74 9.74.3 Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Necessary Screws Etc. Complete:150X10 Mm 75 9.83 Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete. 76 Od127305/2025-2026 Providing And Fixing Frp (Fibre Reinforced Polymer) Door Shutter Of Size 80Cm 28-30Mm Thickness With Frame And Tower Bolts, Handles, Mortice/Cylindrical Locks And All Other Accessories Etc. Complete Including All Materials And Labour Charge Etc As Per The Direction Of Engineer In Charge 77 Od126510/2025-2026 Providing And Fixing Frp (Fibre Reinforced Polymer) Door Shutter Of Size 90Cm And 28-30Mm Thickness With Frame 110Mm Thickness With Necessary Fittings Like Hinges, Tower Bolts, Handles, Mortice/Cylindrical Locks And All Other Accessories Etc. Complete Including All Materials And Labour Charge Etc As Per The Direction Of Engineer In Charge 78 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600 X 600 Mm. 79 11.46.2 Providing And Laying Vitrified Tiles Indifferent Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete.Size Of Tile 600X600 Mm 80 11.37 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete 81 8.31 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In- Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 82 13.80 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 83 13.43.1 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 84 13.60.1 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 85 13.47.1 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) 86 13.85.1 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound) Content.With Ready Mixed Pink Or Grey Primer On Wood Work (Hard And Soft Wood ) Having Voc Content Less Than 50 Grams/ Litre 87 13.61.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 88 10.28 Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) 89 Od135395/2025-2026 Supplying And Fixing Anganwadi/Library/Vignjaanwadi Name Board With Emblem Using Acrylic Sheet Base With Reflective Type Sticker As Per Required Shade And Color Etc Complete. Size Of Board 3.00Mx 0.60M 90 1)Plumbing Works -Ground Floor & First Floor 91 17.3.2 Providing And Fixing White Vitreous China Pedestal Type Water Closet Bend With Fittings & C.I. Brackets, 40 Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required :W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid 92 50.17.1.5 Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 93 17.7.2 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630 X 450 Mm With A Single 15 Mm C.P. Brass Pillar Tap 94 17.9.1 Providing And Fixing Kitchen Sink With C. I Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P Brass Waste Complete, Including Painting The Fittings And Brackets, Cutting And Making Good The Walls Wherever Required:White Glazed Fire Clay Kitchen Sink Of Size 600X450X250 Mm 95 18.53.1 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is: 893115 Mm Nominal Bore 96 18.32.1 Constructing Masonry Chamber 30X30X50 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Stop Cock, With C.I. Surface Box 100X100X75 Mm (Inside) With Hinged Cover Fixed In Cement Concrete Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design:With Common Burnt Clay F.P.S (Non Modular) Bricks Of Class Designation 7.5 97 17.73.2 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fitting Arrangement Of Approved Quality And Colour600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighting Not Less Than 190 Gms 98 18.51.1 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms.15 Mm Nominal Bore 99 50.18.7.2.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Claps At 1.00 Metre Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 20 Mm Dia 12Kgf/Cm2 - Internal Work - Exposed On Wall 100 50.18.9.3.2 Providing And Fixing Pvc Pipes Includes Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 25 Mm Dia 10Kgf/Cm2 101 50.18.7.6.1 Providing And Fixing Pvc Pipes, Fittings Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Pvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer-In-Charge 50 Mm Dia 10 Kfg/Cm - Internal Work- Exposed On Wall 102 50.18.9.7.1 Providing And Fixing Pvc Pipes Includings Of Pipes With One Step Pvc Solvent Cement, Trenching Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 63 Mm Dia 6Kgf/Cm3 103 50.18.9.9.1 Providing And Fixing Pvc Pipes Includings Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.110 Mm Dia 6Kgf/Cm2 104 50.18.9.22.1 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110 Mm Dia Elbow 105 50.18.9.22.2 Providing And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110 Mm Dia 45 Degree Elbow 106 50.18.9.22.4 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement- 110 Mm Dia Bend 107 50.18.9.22.5 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes Including Jointing With Pvc Solvent Cement 110X110X110 Mm Dia Tee 108 50.18.9.22.7 Providing And Fixing Pvc Moulded Fittings/ Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110X110X75 Mm Dia Door Tee 109 18.58.2.1 Providing And Fixing Ptmt Grating Of Approved Quality And Colour. Rectangular Type With Openable Circular Lid150 Mm Nominal Size Square 100 Mm Diameter Of The Inner Hinged Round Grating 110 51.19.St4 Supplying And Installing Ready Made Pvc Septic Tank Including The Cost Of Carriage, Trenching, Placing At The Level Below Ground Level As Specified As Per The Direction Of Engineer In Charge (Provision For Cc/Rcc/Sand/06Mm Aggregate For The Preparation Of Bed Shall Be Paid Separately) 4. 35 To 50 Flush Capacity 111 18.48 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank :Isi 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 112 Od141980/2025-2026 Providing 25Mm/32Mm (3/4 Inch/1 Inch) Public Building Connection With 20Mm (3/4 Inch) Water Meter From Existing Ci Mains Up To 125 Mm Dia., Up To A Length Of 5 M Using 25Mm Indian Standard Class 6 Upvc Pipe And Upvc / Gm / Brass Specials Viz. Brass Ferrule, Gm Full Way Wheel Valve, Elbow, Mta, Fta, Couplers Etc. And Connecting With The Mains, Testing The Joints Etc. Complete Including Trenching And Refilling In All Kinds Of Soil Up To A Depth Of 1.50M For Main Line Tracing And Trench Of Average Cross Section 0.3M X 0.75M For Laying Connection Pipe And Service Pipe, Fixing Water Meter, Lighting, Watching, Providing Caution Boards, Traffic Control Etc. Complete Including Cost Of Materials, Hire For Tools, Cost Of Consumables And Labour Charges , Cost Of Water Meter And Meter Box, Deposit Charges Of Kwa And Including Charges For Cutting The Concrete / Tarred / Bituminous Roads Etc, If Necessary And As Per The Direction Of The Engineer-In-Charge. 113 1)Electrical Works -Ground Floor & First Floor 114 1.10.3 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group C 115 1.14.2 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 116 1.23.4 Supplying And Fixing Following Piano Type Switch / Socket On The Existing Switch Box/ Cover Including Connections Etc. As Required.3 Pin 5/6 Amp Socket Outlet 117 1.24.3 Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15/16 Amp Switch 118 1.24.5 Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15/16 Amp Socket Outlet 119 1.12 Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Along With 1 No 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. 120 2.3.3 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 12 Way, Double Door 121 1.25 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 122 5.4 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. 123 5.19 Providing And Fixing 4.00 Mm Dia Copper Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. 124 1.27.2 Supplying And Fixing Following Size/ Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module (100Mmx75Mm) 125 2.14.2 Supplying And Fixing Following Rating, Double Pole, (Single Phase And Neutral),240 Volts, Residual Current Circuit Breaker (Rccb), Having A Sensitivity Current 30 Milli Amperes In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps 126 2.10.1 Supplying And Fixing 5A To 32 A Rating, 240/415 Volts, 10 Ka, \\C\\ Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole 127 1.14.1 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2X1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 128 2.12.1 Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 129 Od123876/2025-2026 Supplying And Fixing Following 32 Amps Modular Dp Switch And Other Accessories Etc Complete 130 Od123878/2025-2026 Supplying And Fixing 14 W Led Connect With Bulk Head Fixing And Other Accessories 131 Od123874/2025-2026 Supply And Fixing Angle Batten With 7/9 Watts Led And Other Accessories 132 Od123877/2025-2026 Supply And Fixing Angle Batten With 14/15 Watts Led And Other Accessories 133 Od123872/2025-2026 Supplying And Fixing 20W Led Tube Set (Approved Brands) And Other Accessories 134 90.4.5.4 Supply, Installation, Testing And Commissioning Of Ceiling Fan Of Following Sizes Including Wiring The Down Rods Of Standard Length (Up To 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable Etc. As Required. 1200Mm Sweep - Ceiling Fan Complete With Service Value Minimum 4.0(Cub Meter/Minute/Watt), Air Delivery Minimum 210(Cubic Meter/Minute), Copper Winding Suitable For 230V/240V Single Phase Ac Supply 135 Od123875/2025-2026 Supplying, Installing, Testing And Commissioning Of Wall Mounted Single Phase 2 Wire Energy Meter With Meter Box Poly Carbonate Body Having Range Of 32 Amp With Enclosure Made Out Of Powder Coated 16 Swg Sheet Suitable For Fixing In Surface/ Recess With Fuse Unit 32 Amp With Neutral Link, Its Interconnection Etc. The Enclosure Shall Have Lockable Door With Glass Window And All Mounting Accessories Etc. Complete As Required Including Kseb Charges 136 2)Childrens Play Equipments 137 Od135736/2025-2026 Supply And Fixing ChildrenS Play Equipment Circular See-Saw Including Cost Of All Materials And Labour Charges Etc Complete. 138 Od135738/2025-2026 Supplying And Fixing ChildrenS Play Equipment Step With Slide Including Cost Of All Materials And Labour Charges, Etc. 139 3)Community Hall-Renovation-Civil Works 140 15.28.1 Dismantling Roofing Including Ridges, Hips, Velleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of :G.S. Sheet 141 15.19 Dismantling Steel Work Manually / By Mechanical Means In Built Up Sections Without Dismembering And Stacking Within 50 Metres Lead As Per Directions Of Engineer -In- Charge. 142 15.2.2 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In-Charge.Nominal Concrete 1:4:8 Or Leaner Mix ( Including Equivalent Design Mix) 143 13.33.1 Pointing On Stone Work With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand):Flush/ Ruled Pointing 144 5.1.2 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:1:5:3 (1 Cement 1.5 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 145 11.41.2 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4(1 Cement : 4 Coarse Sand), Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600 X 600 Mm. 146 13.1.1 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand) 147 13.91 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete 148 13.43.1 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface:Water Thinnable Cement Primer 149 13.60.1 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 150 13.47.1 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Ltr/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/ 10 Sqm) 151 13.88 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 152 13.85.1 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound) Content.With Ready Mixed Pink Or Grey Primer On Wood Work (Hard And Soft Wood ) Having Voc Content Less Than 50 Grams/ Litre 153 13.99.1 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :One Or More Coats On Old Work 154 50.10.1 Steel Work In Built Up G I Tubular ( Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 155 50.10.2 Steel Work For Purlin/Single Section With G I Pipes Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete 156 12.50 Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Cost Index (Place) : Kollam, Gst : 18% Printed On 2026-03-17 13:56:12.13 20 Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling/Self Tapping Screws Of Size (5.5X55Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 157 12.51.1 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screwscomplete :Ridges Plain (500-600 Mm)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
31.
Public Administrative Department #11300743 AOC
Tender For Lac-Ads-Lac Ads 2025-26 Sri. T P Ramakrishnan Mla - Tm Balakurupp Grandhalayam Manava(Avala) Cheruvannur Pt-Perambra Constituency-General Civil Work- 1 Building cocstruction 2 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 3 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 4 51.2.3:Filling with Quarry Muck
Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade 5 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 6 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 7 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers 8 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) 9 5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts 10 5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 11 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. 12 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. 13 5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide 14 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform 15 5.9.7:Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) 16 5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges 17 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). 18 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 19 5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more 20 50.6.7.2:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 21 OD410732/2025-2026:Supplying fabricating PVC door with frame in locally available best quality including cost of all fittings, labour charges etc.complete. 22 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete 23 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 24 13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) 25 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer 26 13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm) 27 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 28 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 29 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 30 21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) 31 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 32 8.31:Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 33 11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 34 17.7.4:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 35 50.17.1.5:Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 36 17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 37 17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid 38 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 39 51.19.ST2:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately)
2. 15 to below 25 flush capacity 40 50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall 41 50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall 42 50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2 43 50.18.9.9.2:Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 44 50.18.9.20.7:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia vent cowl 45 50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl 46 50.18.9.20.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Elbow 47 50.18.9.20.3:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Door Elbow 48 50.18.9.20.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend 49 50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow 50 50.18.9.22.3:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow 51 50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend 52 50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 53 50.17.1.2:Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. 54 18.15.1:Providing and fixing brass bib cock of approved quality :15 mm nominal bore 55 18.58.1.1:Providing and fixing PTMT grating of approved quality and colour.Circular type100 mm nominal dia Please Enable Macros to View BoQ information
Contract Date: Jun 17, 2026 Contract Value : 24.12 Lakh
Government Departments No of Bidders 2
32.
Public Administrative Department #11300261 AOC
Tender For Annual Plan-161/25-GREENVALLY DWSSBORE WELLWARD-6-General Civil Work--- 1 Dws- 2 OD496514/2024-2025:Drilling charge of 110 mm bore well 3 OD496513/2024-2025:casing pipe 140 mm dia 6kg/cm2 PVC 4 OD496512/2024-2025:Cost of 1 No 140 mm dia PVC end cap 5 OD496516/2024-2025:Supply and fixing 5 hp motor pump of approved brands including all cost of conveyance labour etc complete 6 OD496520/2024-2025:Supply and fixing pump starter with control panel for 5 hp mortor pump setincluding all cost of conveyance labour etc complete 7 OD496511/2024-2025:Supply and fixing 3 phase pnnel board including all cost of conveyance labour etc complete 8 OD496515/2024-2025:Supply and fixing 6 mm cable including all cost of conveyance labour etc complete 9 OD496518/2024-2025:Supplying 16 mm plastic rope 10 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 11 OD496519/2024-2025:1.001- Specification code: Supplying and fixing 40 mm dia 10 kg/cm2 HDPE pipe PE - 80 including specials and all fitting charges but excluding trenching and refilling etc. complete. 12 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 13 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil 14 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) 15 OD521302/2024-2025:DR RUBBLE MASONARY, -Dry rubble without concrete levelling course masonary with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc.complete as per direction of departmental officers at site 16 50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete 17 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 18 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 19 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 20 9.117.1:Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-chargeExtruded section profile size 48x40 mm 21 9.118.1:Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of H section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. U cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturers specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter). 22 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 23 OD514527/2024-2025:Providing nad fixing 0.35mm thick GI tile profile/traffold sheets roofing up to any pitch and fixing with polymer coated J or L hooks ,bolts and nuts 8mm dia GI plain and bitumen washer or with self drilling fastener and EPDM washers etc.complete (excluding cost of purlin rafters and trusses)including cutting sheets to size and shape wherever required 24 OD503716/2024-2025:Supplying and fixing RCC Door frame 80*195 25 OD496517/2024-2025:Granite name board
Contract Date: Jun 16, 2026 Contract Value : 3.99 Lakh
Government Departments No of Bidders 1
33.
Public Administrative Department #11300148 AOC
Tender For Construction Of Inspection Banglow, Guest House, Boundary Wall & Garage Near Suklai Head Works Under Extension, Renovation And Modernization Of (Erm), Sukla Irrigation Project Under Pmksy-Aibp For The Year 2021-22. , Construction Of Inspection Banglow, Guest House (Ground Floor). Earth Work : Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. , Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Providing And Laying Damp-Proof Course 40Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 12.5Mm Nominal Size Derived From Natural Sources) , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Pre Construction Anti - Termite Treatment : Diluting And Injecting Chemical Emulsion For Post-Constructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration , Brick Work : Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40 Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Plinth Protection : Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation Leveling And Dressing And Finishing The Top Smooth. , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow Cum Guest House (First Floor). Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work : Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow, Guest House (Second Floor). Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work : Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , Roofing : Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 B49grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester To Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Sound Proof : Providing And Fixing Thermal Insulation With Resin Bonded Fibre Glass Wool Conforming To Is: 8183 Having Density 24 Kg/M3, 50 Mm Thick, Wrapped In 200G Virgin Polythene Bags Fixed To Wall With Screw, Rawel Plug & Washers And Held In Position By Criss Crossing Gi Wire Etc. Complete As Per Directions Of Engineer-In-Charge. , 8 Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Processto Give Stable Crystalline Structure With Minimumcompressive Strength 225 Kg/ Sq. Cm, Bending Strength100 Kg/Sq. Cm , Of Size 595X595 Mm, Having Perforationof Dia. 10 Mm With Minimum Perforated Area 18 % Withnon Woven Tissue On The Back Side, Having An Nrc( Noise Reduction Coefficient) Of 0.85, With 50 Mm Thickrockwool Of 48 Kg /Cum Backing , Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Fully Perforated Gypsum Plaster Board Of Size 1200 X 2400X12.5 Mm Having Approx. 15 % Perforated Area With Perforation Size And Pattern As Approved By The Engineerin-Charge And As Per Manufacturers Specification, With All 4 Side Tapered And Backed By Acoustical Tissue With Nrc Value Not Less Than 0.60 , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow, Guest House (Inetrnal Electrification) Sub Head -I (Wiring) Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. A) Group A , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Along With 1 No 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire , 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , 6 X 1.5 Sq. Mm , 6 X 4 Sq. Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 20 Mm , 25 Mm , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socket Outlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Be Used In Non Residential Buildings). , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3Pin 5/6 Socket Outlet , Sub Head - Ii (Mcb & Dbs ) Supplying And Fixin G Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)8 Way, Double Door , Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 215 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 4 Way (4 + 12), Double Door , Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Bre Aker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40/63 A Tp , Sub Head-Iii (Fan,Fittings And Fixtures) Supplying, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee Five Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc Motor) Not Less Than 32 W, Class Of Insulation B, 3 Nos Blade, 30 Cm Long Down Road, 2 Nos Of Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85 Air Delivery Minimum 215Cmm , 350 Rpm (Tolerance As Per Is:374-2019), Thd Less Than 10% Remote Or Electronic Regulator For Speed Control And All Remaining Accessories I/C Safety Pin, Nut Bolts , Washer, Temperature Rise=75 Degree C(Max. ), Insulation Resistance More Than 2Mega Ohm, Suitable For 230V, 50 Hz Ac Supply, Earthing Etc. Complete As Required. , Supplying, Installation Of Exhaust Fan Sweep Not Less Than 300 Mm In The Existing Opening, And Made Of Aluminium Die-Cast Motor Body, Front Protection Guard, Low Noise Operation, Robust Metal Body,Double Ball Bearing,Anti Dust,High Speed(Minimum 1350 Rpm) & High Air Delivery(Minimum 1000 Cmh) Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. , Supplying,Installation, Testing And Commissioning Of Surface Mounted Square/Round Shape Led Downlighter Having Suitable Housing Lumen Efficacy = 100Lm/Watt, System Lumen Output = 1200 Lm, Cri = 80, Power Factor = 0.9 Having Suitable Diffuser And Cct In Between 4000K To 6500 K (I/C Both Limits) Complete With All Accessories Etc. Directly On Ceiling/Wall Including Connection With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc. As Required. , Sub Head-Iv (Service Connection) Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Above 35 Sq. Mm And Upto 95 Sq. Mm , Supplying Of One Number Xlpe Insulated And Pvc Sheathed Aluminium Conductor Armoured Power Cable Of 1.1 Kv Grade With Isi Marked (Is 7098 (Part - I) / 1988 With Amendment Up To Date) Following Sizes. A) 3 ½ X 35 Sq.Mm , B) 3 ½ X 95 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. A) 3.5 X 35 Sqmm ( 32 Mm ) , B) 3½ X 95 Sq. Mm (45Mm) , Supplying And Fixing Of Light Class G.I. Pipe Of 80 Mm Dia. (Nominal) 3 Metres Length Along The Pole For Protection Of Under Ground Cable As Required. , Sub-Head -V( Lighting Conductor And Earthing ) Providing And Fixing Of Lightning Conductor Finial, Made Of 25 Mm Dia 300 Mm Long, G.I. Tube, Having Single Prong At Top, With 85 Mm Dia 6 Mm Thick G.I. Base Plate Including Holes Etc. Complete As Required. , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required. (For Horizontal Run) , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required. (For Vertical Run) , Providing And Fixing Testing Joint, Made Of 20 Mm X 3 Mm Thick G.I. Strip, 125 Mm Long, With 4 Nos. Of G.I. Bolts, Nuts, Chuck Nuts And Spring Washers Etc. Complete As Required , Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. , Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required , Providing And Laying G.I. Tape 32 Mm X 6 Mm From Earth Electrode Directly In Ground As Required. , Sub Head-Vii (Air Condition) Supplying, Installation, Testing And Commissioning Of Suitable Tr Capacity 5 Star Rating With Eer Not Less Than 4.3 , Split Type Inverter Air Conditioning Units Suitable For Indoor Unit To Be Fixed On The Wall Having Minimum Cooling Capacity 5400 Kcal/Hr Suitable For Single Phase Ac Supply Complete With Outdoor Unit Having Copper Condenser Coil,Suitable Clamp/Bracket For Fixing Outdoor Unit, Inter Connection With Suitable Copper Pipe Etc. Complete As Required. , Supplying , Installation, Testing And Commissioning Of Automatic Voltage Stabilizer Of Capacity 5 Kva For Air Conditioner With 130-240 Volts Range For Operation Of Air Conditioner Complete With Testing Trail Run Etc Complete As Reqd. , Supplying , Installation, Testing And Commissioning Of Automatic Voltage Stabilizer Of Capacity 5 Kva For Air Conditioner With 130-240 Volts Range For Operation Of Air Conditioner Complete With Testing Trail Run Etc Complete As Reqd. , Supply, Installation Testing & Commissioning Of Rigid Upvc Piping Complete With Fittings, Supports As Per Specifications And Duly Insulated With 6 Mm Thick Closed Cell Nitrile Rubber Insulation. A) 25 Mm Dia ( With 6 Mm Nitrile Rubber Insulation) , Construction Of Inspection Banglow, Guest House (For Sanitary & Water Supply) Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Surgeon Type Wash Basin Of Size 660X460 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps With Elbow Including Operated Levers , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is:13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : Kitchen Sink With Drain Board 510X1040 Mm Bowl Depth 250 Mm , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Semi Rigid Pipe 40 Mm Dia , Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Providing And Fixing Toilet Paper Holder : Vitreous China , Providing And Fixing Soil, Waste And Vent Pipes : 100 Mm Dia Sand Cast Iron S&S Pipe As Per Is: 1729 , Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors : 100 Mm Inlet And 100 Mm Outlet Sand Cast Iron S&S As Per Is: 3989 , Cutting Chases In Brick Masonry Walls For Following Diameter Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes And Making Good The Same With Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 12.5 Mm Nominal Size), Including Necessary Plaster And Pointing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) : 100 Mm Dia , Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. , Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With Minimum Distances Of 37 Mm From Wall Face With Concealed Fittings Arrangement Of Approved Quality And Colour, Weighing Not Less Than 88 Gms. , Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms , Providing And Fixing Brass Bib Cock Of Approved Quality : 20 Mm Nominal Bor , Providing And Fixing Brass Stop Cock Of Approved Quality : 20 Mm Nominal Bor , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 15 Mm Dia Nominal Outer Dia Pipes , 20 Mm Dia Nominal Outer Dia Pipes , 25 Mm Dia Nominal Outer Dia Pipes , 32 Mm Dia Nominal Outer Dia Pipes , 40 Mm Dia Nominal Outer Dia Pipes , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc Internal Work - Exposed On Wall 15 Mm Dia Nominal Bore , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. Internal Work - Exposed On Wall 20 Mm Dia Nominal Bore , 32 Mm Dia Nominal Bore Metre , 40 Mm Dia Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 20 To 40 Mm Nominal Bore , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) 20 Mm Nominal Bore , 32 Mm Nominal Bore , 40 Mm Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 15 Mm Nominal Bore , 20 Mm Nominal Bore , 25 Mm Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 40 Mm Nominal Bore Horizontal , Vertical , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions : 30 Cm Length 15 Mm Nominal Bore , 20 Mm Nominal Bore , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Tube Well Boring With 100 Mm Diameter Casing Pipe For Hand Pump / Tubewell, In All Soils Except Ordinary Hard Rocks Requiring Blasting, Including Removing The Casing Pipe After The Hand Pump / Tube Well Is Lowered And Tested : Up To 6 Metres Depth , Beyond 6 M And Up To 12 M Depth , Beyond 12 M And Up To Required Depth , Providing And Placing In Position Filters Of 40 Mm Diameter G.I. Pipe With Brass Strainer Of Approved Quality. , Providing And Placing In Position Hand Pump Of Approved Quality For 40 Mm Diameter G.I. Pipe Complete With All Accessories. , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) : 50 Mm Nominal Bore , Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design: 150 X 100 Mm Size P Type With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) With Reinforced Cement Concrete Top Slab With 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455X610 Mm Internal Dimensions, Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15 Kg) : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Reducing Socket, Bend, Tee, Etc. , Construction Of Septic Tank. (50 Users) Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Vertical And Horizontal Fins Individually Or Forming Box Louvers Band, Facias And Eaves Boards , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : , Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement. , Retaining Wall Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc , Lintels, Beams, Plinth Beams, Girders, Bressumers And , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Dismentling Existing A-Type Building Demolishing Reinforced Cement Concrete Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area Beyond 3 Sq. Metres , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles Above 25 Mm And Up To 40 Mm , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area 40 Square Centimetres And Above , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of G.S. Sheet , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. , Boundary Wall With Fencing). Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Lintels, Beams, Plinth Beams, Girders, Bressumers And , Columns, Pillars, Piers, Abutments, Posts And Struts , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In : , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : , 20 Mm Cement Plaster Of Mix : , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. , Fencing With Reinforced Cement Concrete Post Placed At Required Distance, Embedded In Cement Concrete Blocks, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post One Side Only, Provided With Horizontal Lines And Two Diagonals Of Barbed Wire Weighing 9.38 Kg Per 100 Metres (Minimum), Between The Two Posts Fitted And Fixed With G.I. Staples On Wooden Plugs Or G.I. Binding Wire Tied To 6 Mm Bar Nibs Fixed While Casting The Post (Cost Of Reinforced Cement Concrete Posts, Struts, Earth Work And Concrete To Be Paid For Separately) :- Payment To Be Made Per Metre Cost Of Total Length Of Barbed Wire Used. , Land Development Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. , O.H. Tank Not Found!!! , Solar Street Light Godox S60 Led Focusing Light, Outdoor & Indoor , Gate Pillarlight For Home Outdoor Garden Post Decorative Lamp , Dg Set , Audio Visual Systems Projector (Sony) , Motorised Screen And Accessories (6Ft / 8 Ft) , Digital Podium All-In-One System , Chairman Unit , Delegate Unit , Amplifier 80 Watt , Microphones , Ceiling Mount Speaker ( 6 Watt) , Wire & Lane Cabling For Speaker , Projector & Amplifier Hdmi Wire Connector Wiring Set , Installation, Testing And Commissioning Charges And Configuration Of The System , M.I. 64 -T.V. 4 Nos. @ Rs. 75000/- Per Nos. , Cctv With Motion Sensor And Sound Recorder Including Supplying & Fitting Fixing (Philips Hsp 3800) , Furniture & Fixture Sofa Set A/ Waiting Hall , B/ Executive Guest Room , C/ Suite Room , Executive Table A/ Executive Guest Room , B/ Suite Room , Executive Chair , Bed A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Matress A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Chair A/ Guest Room , B/ Staff Room , C/ Suite Room I)Type-I , Ii)Type-Ii , D/ Security Room , Bed Sheet A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Pillow A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Blanket A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Mosquito Net A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Bath Towel , Hand Towel , Kitchen Utensil A/ Gas Stove , B/ Pressure Cooker , B/ Cookware Set , C/ Dinner Set , D/ Cup Plate Set , E/ Cutlery Set , F/ Mixture Grinder , G/ Electric Kattle , H/ Microwave Oven , I/ Container , Conference Table , Conference Chair (Elentra-112 Steel Frame Fixed Chair)
Contract Date: Jun 16, 2026 Contract Value : 4.10 Crore
Government Departments No of Bidders 2
34.
Housing Urban and Rular Development #11299927 AOC
Tender For Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of: , Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead :Of Sectional Area 40 Square Centimetres And Above , Providing And Laying In Position Cement Concrete 1:4:8 (1 Cement : 4 C/Sand : 8 St. Agg. 40 Mm Size) Excluding The Cost Of C/Shuttering - All Work Upto Plinth Level. , Brick Work With F.P.S. Bricks Of Class Designation 75 In Super Structure Above Plinth Level Upto Floor V Level In Cement Mortar 1:6 (1 Cement : 6 C/Sand). , Reinforced Cement Concrete Work In Beam,Suspended Floor Roof Having Slop Up To 15 Degree Landing Balcony Shelf Chajjas Lintels Band Plain Windoe Cills Staircase & Sprial Stair Case Etc. Up To Floor Five Level,Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement :1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate20 Mm Nominal Size) , Centering And Shuttering I/C Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers. , Reinforcement For Reinforced Cement Concrete Work I/C Straightening, Cutting, Bending, Placing In Position And Binding All Complete --Thermo - Machanically -Treated Bars. , Half Brick Masonry With F.P.S. Bricks Of Class Designation 75 In Superstructure Abov Plinth Level Upto Floor V Level In Cement Morar 1:4 (1 Cement :4 Sand) , 12 Mm Cement Plaster Of Mix. 1:6 Cement And Fine Sand Mortar. , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix :1:6 (1 Cement: 6 Fine Sand) , Providing And Laying Vitrified Tiles In Floor With Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 154 77, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately).Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1 :3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Laying In Position Cement Concrete Of Specified Grade 1:2:4 (1Cement :2 Sand : Stone Aggregate 40Mm Nominal Size) Excluding The Cost Of Centring And Shuttering - -All Work Upto Plinth Level , Providing And Applying White Cement Based Putty Of Average Thickness 1Mm Of Approved Brand And Manufacture, Over Plastered Wall Surface To Prepare The Surface Even And Smooth Complete , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade :New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) , Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gram/Litre, Of Approved Manufacturer And Of Required Shade And Colour All Complete To Achieve Even Shade And Colour : , Painting Steel Work With Deluxe Multi Surface Paint Of Req. Shade (Two Or More Coats) Applied Over An Under Coat Of Primer Approved Brand. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :One Or More Coats On Old Work , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc. Iinternal Work - Exposed On Wall 15 Mm Dia. Nominal Bore , Providing And Fixing Brass Bib Cock Of Approved Quality 15 Mm Nominal Bore , Providing And Fixing Brass Stop Cock Of Approved Quality 15 Mm Nominal Bore , Providing And Fixing Ball Valve (Brass) 15 Mm Nominal Bore High & Low Pressure With Plastic Floatsof Approved Quality Complete , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) 25 Mmnominal Bore , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is: 5382, Leaving 10 Mm Gap For Thermal Expansion, () Single Socketed Pipes. , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is: 5382, Leaving 10 Mm Gap For Thermal Expansion, () Single Socketed Pipes75 Mm Diameter , Providing And Fixing Pvc Door Frame Of Size 50X4 7 Mm With A Wall Thickness Of 5 Mm (± 0.2 Mm), Made Out Of Single Piece Extruded Pvc Profile, With Mitred Cut Joints And Joint With 2 Nos Of Pvc Bracket Of Size 190 Mm X 100 Mm Long Arms Of Cross Section Size 35 X 15 Mm & Self Driven Self Taping Screws, The Vertical Door Profiles To Be Reinforced With 40X20 Mm M.S. Rectangular Tube Of 0.8 Mm , Including Providing Epdm Rubber Gasket Weather Seal Throughout The Frame, Including Jointing 5 Mm Pvc Frame Strip With Pvc Solvent Cement On The Back Of The Profile. The Door Frame To Be Fixed To The Wall Using 8 X100 Mm Long Anchor Fasteners Complete, All As Per Manufacturers Specification And Direction Of Engineer -In- Charge. , 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter, Made Out Of Single Piece Extruded Soild Pvc Profiles, 5 Mm (± 0.2 Mm) Thick, Having Styles & Rails (Except Lock Rail) Of Size 95 Mmx 35 Mm X 5 Mm, Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered ( On Both Side), Having One Side Thickness Of 15 Mm Integrally Extruded On The Hinge Side Of The Profile For Better Screw Holding Power, Including Reinforcing With Ms Tube Of Size 40 Mm X 20 Mm X 1 Mm, Joints Of Styles & Rails To Be Mitered Cut & Joint With The Help Of Pvc Solvent Cement, Self Driven Self Tapping Screws & M.S. Rectangular Pipes Bracket Of Size 190 Mm X 100 Mm Of Cross Section Size 35 Mm X 17 Mm X 1 Mm At Each Corner. Single Piece Extruded 5 Mm Thick Solid Pvc Lock Rail Of Size 115 Mm X 35 Mm, Out Of Which 75 Mm To Be Flat And 20 Mm To Be Tapered At Both Ends, Having 15 Mm Solid Core In Middle Of Rail Section Integrally Extruded, Fixing The Styles & Rails With The Help Of Solvent And Self Driven Self Tapping Screws Of 125 Mm X 11 Mm, Including Providing 5 Mm Single Piece Solid Pvc Extruded Sheet Inserted In The Door As Panel, All Complete As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C. Brass Pillar Tap. , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms15mm Nominal Bore.. , Providing And Fixing Aluminium Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm), With Necessary Accessories And Screws Etc. Complete , Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements Weighing Not Lessthan 106 Gms. , Providing And Fixing Mirror Of Superior Glass (Of Approv Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. With Plastic Moulded Frame Of Approved Make And Shades With 6 Mm Thick Hard Board Backing:Rectangular Shape 453X357mm , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required:White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests , Marble Stone Flooring With 18 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Cement Mortar 1 :4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Grey Cement Slurry, Including Rubbing And Polishing Complete With : Udaipur Green Marble , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Persqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing Ridges Or Hips Of Width 60 Cm Overall Width Plain G.S. Sheet Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Dia G.I. Limpet And Bitumen Washers Complete , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50 Mm (Base Metal Of Minimum 0.45 Mm Thickness With Total Coating Thickness Of 0.05 Mm) With Zinc Coating 120 Gram Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Gutter (600 Mm Over All Girth) , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Nrc (Noise Reduction Coefficient) Of 0.50 (Minimum) As Per Is 8225:1987, Light Reflectance Of 85% (Minimum). Non Combustible As Per Bs:476 (Part-4), Fire Performance As Per Bs:476 (Part 6 &7), Humidity Resistance Of 100%, Thermal Conductivity 0.043 W/M K As Per Astm 518:1991, In True Horizontal Level Suspended On Inter-Locking Metal Powder Coated T-Grid Of Hot Dipped Galvanised Iron Section Of 0.40 Mm Thick On Silhouette Profile,Rotary Stiched Double Webbed White With 6 Mm Reveal Profile (White/ Black),Comprising Of Main-T Runners Of Size 15X42 Mm Of Length 3000 Mm, Cross - T Of Size 15X42 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 15X42 Mm Of Length 600 Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 22X19x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge.With 15 Mm Thick Integral Densified Micro Edge Light Weight Calcium Silicate False Ceiling Tiles , Providing And Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Rockwool Conforming To Is: 8183,Density 48 Kg/ M3, 50 Mm Thick, Wrapped In 200 G Virgin Polythene Bags Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete :250X16 Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete :250X10 Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Gradeac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete :125 Mm , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows Alll Complete With5.5 Mm Thick Glass Panes , Providing Fixing 8Mm Diacp/Ss Jet With Flexible Tube Up To 1 Meter Long With Ss Triangular Plate To Eureopean Type Wc Of Quality And Make As Approved By Engineer In Charge , Constructing Brick Masonry Chamber For Underground C.I. Inspection Chamber And Bends With 75 Class Designation Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 455X610 Mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15 Kg) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Finishedwith F.P.S. Bricksinside Dimensions 455X610 Mm And 45 Cm Deep For Single Pipe Line : , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters:30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing And Fixing Glazed Shutters For Doors, Windows And Clerestory Windows Using 4 Mm Thick Float Glass Panes (Weight Not Less Than 10 Kg Per Sqm) Fixing With Isi Marked M.S. Pressed Butt Hinges Bright Finished Of Required Size Wit H Necessary Screws .Second Class Teak Wood30 Mm Thick , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Providing And Fixing White Vitreous China Laboratory Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P Brass Waste And 40Mm C.P. Brass Trap With Necessary C.P. Brass Unions Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Wall Wherever Required :Size 600X450x200 Mm , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash &Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Three Track Three Panels Sliding Window With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface Forplaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. , Providing And Laying Polished Granite Stone Flooring In Requireddesign And Patterns, In Linear As Well As Curvilinear Portions The Building, All Complete As Per The Architectural Drawings, With18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cementmortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cementslurry And Pointing With White Cement Slurry Admixed Withpolishing Etc. All Complete As Specified And As Directed By Theengineer-In-Charge.Polished Granite Stone Slab Jet Black, Cherry Red, Elitbrown, Cat Eye Or Equivalent. , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead :Of Area 3 Sq. Metres And Below , Disposal Of Moorum/Building Rubbish/ Malba/ Similar Unserviceable , Dismantled Or Waste Material By Mechanical Transport Including Loading, Transporting , Unloading To Approved Municipal Dumping Ground For Lead Upto 1 0 Km For All Lifts, Complete As Per Directions Of Engineer-In-Charge . , Providing And Fixing White Vitreous China Laboratory Sink With C.I. Brackets, C.P. Brass Chain With Rubber Plug, 40 Mm C.P Brass Waste And 40 Mm C.P. Brass Trap With Necessary C.P. Brass Unions Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Wall Wherever Required : Size 600X450x200 Mm , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above). (Height Upto 1.2 Metre) , Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honeycomb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Longcomplete As Per Standard Design.With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.In All Kinds Of Soil. , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Cement Mortar 1 :6 (1 Cement: 6 Coarse Sand) , Cement Plaster 1:3 (1 Cement: 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement.20 Mm Cement Plaster
Contract Date: Jun 15, 2026 Contract Value : 19.78 Lakh
Government Departments No of Bidders 5
Uttarakhand View Result →
36.
Public Administrative Department #11290716 Price Bid
Tender for Mgnrega Materilas Supply For 2026-27 , 1 St Class Picked Jhama Brick (Traditional) , 1 St Class Traditional Brick ( Klin Burnt) , Silver Sand , Fine Sand , Medium Sand , Course Sand , Portland Cement , Brick Aggregrates (Single Size) 40 Mm Normal Size. , Stone Aggregrates (Single Size) 40 Mm Normal Size. (Without Carriage) , Stone Aggregrates (Single Size) 20 Mm Normal Size.(Without Carriage) , Stone Aggregrates (Single Size) 10 Mm Normal Size.(Without Carriage) , Stone Aggregrates (Single Size) 5.6 Mm Normal Size.(Without Carriage) , Stone Aggregrates 13.2 Mm Nominal Size. (Without Carriage) , Stone Aggregrates 11.2 Mm Nominal Size. (Without Carriage) , 22.4 Mm Machine Made Chips (Without Carriage). , Jhama Metal Kiln Burnt. ( Size As Direction Of Eic). , Thermocol 12.5 Mm Thick. , Polythene Sheet (150 Gm Per Sqm) , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller- 8 To 10 Tonne , Hire Charge Of Shuttering Plank (Without Prop )(25Mm-30 Mm) Including All Fittings . , Hire Charge Of Shuttering Plank(With Prop )(25Mm-30 Mm) Including All Fittings . , Hire Charge Of Shuttering Plank( With Prop (30Mm 37 Mm ) Including All Fittings . , Vibrator (Needle Type 40 Mm) , Steel Material- Tor Steel Rods/Hysd Bars/Tmt Bars(Sail/Tata/Rinl) (Fe415/Fe500/Fe500d,Conforms To Is 1786) , Steel Material- Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Ssl/Bmasl/Electro Steel)(Fe415/Fe500/Fe500d,Conforms To Is 1786) , Ms Ornamental Grill (Above 10 Kg/Sq.M Up To 16 Kg/Sq.M , 1220. Wire Mesh (Rabbit) , 3050. Galvanised Steel Corrugated Sheets , 1023. Galvanised Steel J Or L Hooks 8 Mm Dia , Galvanised Steel Bolt & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , G.I Lime Washere , Bitumen Washer , Stainless Steel Bolts/ Square Bar And Plates , Unslaked Lime , Supply Of First Aid Box Including Medicines (Specified By Pia) At Site. , Display Board(Ibs) , Display Board(Community) , G.I. Wire , Coconut Rope , Sal Ballah (10 Cm ) , Sal Ballah ( 125 Mm ) , Sal Ballah (15 Cm ) , Cement Primer(Interior) , Cement Primer(Exterior) , Primer( For Wood) , Cement Based Dust Putty , Black Japan Paint , Enamel Paint For Steel Grill , Synthetic Enemel Paint In Black Or Chocolate Shade. , Other Local Wood , Supplying, Fitting & Fixing Factory Made P.V.C. Door Frame Of Size 50 Mmx47 Mm With A Wall Thickness Of 5 Mm, Made Out Of Extruded 5 Mm, Pvc Sheet Miter , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Vitreous China Foot Rests 250X125x25 Mm , Ptmt - Towel Rail (600 Mm) , Fan Hook , Reinforced Cement Concrete Ventilator , Vitrified Floor Tile 60X60 Cm , Turpentine Oil , Hydraulic Door Closer Tuular Type Aluminium Section Body , Anodiesd Aluminium Hanging Type Door Stopper , Vitreous China Flat Back Wash Basin 450X300 Mm , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Supplying, Fitting & Fixing 30 Mm Thick Both Side Prelaminated Factory Made Solid Panel Pvc Door Shutter Consisting Of Outer Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size 19 Mmx19 Mm For Styles, Top And Bottom Rails, M.S. Frame Shall Have Cost Of Steel Primers Of Approved Make , Supplying, Fitting And Fixing M.S. Clamps For Door And Window Frame Made Of Flat Bent Bar, End Bifurcated With Necessary Screws Etc. By Cement Concrete(1:2:4) As Per Direction. (Cost Of Concrete Will Be Paid Separately) (A) 40Mm X 6Mm, 250Mm Length , Anodised Aluminium Butt Hinges Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification (I.S. 205/66) And Fitted And Fixed With Cadmium Plated Screws: (Vii) 100 X 75 X 4.0Mm , Anodised Aluminium Barrel / Tower / Socket Bolt (Full Covered) Of Approved Manufactured From Extruded Section Conforming To I.S. 204/74 Fitted And Fixed With Cadmium Plated Screws: (Vi) 200Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification (I.S. 230/72) Fitted And Fixed Complete: (A) With Continuous Plate Base (Hexagonal/ Round Rod) (Iii) 100 Mm Grip X 12 Mm Dia Rod. , (C) Supplying 6 Levers Godrej Crystal Satine Mortice Lock With Keys Including Fitting & Fixing Complete. , I) Iron Hasp Bolt Of Approved Quality Fitted And Fixed Complete (Oxidised) With 16Mm Dia Rod With Centre Bolt And Round Fitting. (A) 200Mm Long , Door Stopper.(Brass) , Red Lead Primer For Steel Grill , Interior Premium Imulsion(Plastic Paint) , Exterior Imulsion Weather Coat Paint , Distemper Paint , Supply Of Upvc Pipes (B Type) (For Soil Pipe Purpose) & Fittings Conforming To Is-13592-1992 (A) (I) Single Socketed 3 Meter Length (C) 160 Mm , (Ii) Plain Tee For Soil Pipe Purpose. (C) 160 Mm , V) Plain Y For Soil Pipe Purpose. (C) 160 Mm , Supplying, Fitting & Fixing Upvc Down Pipes A- Type And Fittings Conforming Tois:13592-1992 With All Necessary Clamps Nails, Including Making Holes Inwalls, Floor Etc. Cutting Trenches In Any Soil Through Masonry Concrete Structures Etc If Necessary And Mending Good Damages Including Joining Withjointing Materails (Spun Yarn, Valamoid/Bitumen/M-Seal Etc) Complete. A) Upvc Pipes: (Ii) 110 Mm. Dia. , B) Upvc Fittings: A) Plain Tee (Ii) 110 Mm. Dia. , D) Shoe (Ii) 110 Mm. Dia , Qgs Seed(10 Variety) , G.I. Hollow Pipe Squre Or Round Section For Roof Truss 50 Mm Dia Or 2 Inch Shape , G.I. Hollow Tubewell Pipe Round Section (Old) For Roof Truss 75 Mm Dia , Colour Interlock cement concrete Paver Block , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using , Precast Chequered Cement Tiles 22 Mm Thick Medium Shade , Upvcbend 87.50, 110 Mm Bend , Upvc Pipe Clip 110 Mm Bend , Check Valve 32Mm , Check Valve 40Mm , Bamboo , Bamboo ( 8 Cm- 10 Cm Dia) Including Fixing , 5000 Lit Hire , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangement . , Supply Of G. I. Pipes Of Tata Make Including Necessary Sockets - 15 Mm Dia.(Medium Quality) , Supply Of G. I. Pipes Of Tata Make Including Necessary Sockets - 25 Mm Dia.(Medium Quality) , Chlorinated Polyvinyl-Chloride(Cpvc) Pipe 25Mm Outer Dia. , Chlorinated Polyvinyl-Chloride(Cpvc) Pipe 15Mm Outer Dia. , 15 Mm Ptmt Bib Cock , Ptmt Push Cock 15 Mm Dia , Shower Jet , Vitreous China Squatting Plate Urinal , Mirror Of Superior Make Glass 60X45 Cm , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , Upvc Pipes (Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , Empty Gunny Bag , Vermi Compost , Farm Yard Manure/Cowdung (@ Max 20% Moisture Content) , Lime Dust , Lime Stone Powder , Neem Khol Or Other Oil Seed Cake , Bone Dust , Neem Oil 10000 Ppm , 2:1:1 Npk Based Organic Manure , 5:1:1 Npk Based Organic Manure , Poly Tube (4 X 6 ) , Poly Tube (6 X 8 ) , Poly Tube (8 X 12 ) , Bio Pesticides , Bio Fungicides , Buckets , Turpoline Shed With 4 Nos. Bamboo Stucture
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 15
West Bengal View Result →
37.
Public Administrative Department #11286668 AOC
Tender For Construction/Repair Work In Record Room/Nazarat Department - (a) Bricks M-150 2 (b) Bricks M-100 3 (c) Bricks-Straight over brunt 4 (d) Bricks- Tiles (Ist Class) 5 (e) Brick Bats M-75 6 (f) Brick Bats (O.B.) 7 Fly ash Bricks (specification/strength should not be less then Bricks M-150)size 230x110x75mm 8 Fly ash Bricks Tiles (specification/strength should not be less then Bricks M-150)size 230x110x38mm 9 Fly ash Concrete curve Stone (specification/strength should as per mord/morth) size 300x300x150mm (M30) 10 (a) 5.00cm. Gauge 11 (b) 4.00 cm. gauge 12 (c) 2.50 cm. gauge 13 Stone Grading Materials Aggregate - For 37.5 mm Maximum size - 22.4 mm to 5.6 mm 14 Aggregate - For 37.5 mm Maximum size - 45 mm to 22.5mm 15 Aggregate - For 37.5 mm Maximum size - Below 5.6 mm 16 Aggregate - For 53 mm Maximum size - 22.5 mm to 5.6mm 17 Aggregate - Grading I (40 mm nominal Size) 10 mm - 5 / 4.75 mm 18 Aggregate - Grading I (40 mm nominal Size) 25 mm – 10mm 19 Aggregate - Grading I (40 mm nominal Size) 37.25 mm -25mm 20 Aggregate-Grading I 90 mm to 45 mm 21 Aggregate-Grading II 63 mm to 45 mm 22 Aggregate-Grading III 53 mm to 22.4 mm 23 Aggregates 22.4 mm to 2.36 mm for wet mix macadam 24 Aggregates 45 mm to 22.4 mm for wet mix macadam 25 Crushed Sand or Grit Passing 2.36 mm and retained on 180 micron 26 Crushed Stone Aggregate 26.5 mm to 75 micron 27 Crushed Stone chipping 13.2 mm nominal size 28 Crushed Stone Chipping 6.7 mm size 100% passing 11.2 mm and retained on 2.36 mm 29 Crushed Stone Chipping 6.7 mm size 100% passing 9.5 mm and retained on 2.36 mm 30 Crushed Stone chipping 9.5 mm nominal size 31 Crushed Stone Coarse Aggregate Passing 53 mm and retained on 2.8 mm 32 Fine aggregate/Crushed sand 2.36 mm to 75 micron 33 Stone Boulder of size 150 mm and below 34 Stone for Coarse Rubble Masonry 1st Sort 35 Stone for Coarse Rubble Masonry 2nd Sort 36 Stone for Random Rubble Masonry 37 Stone for Stone Set Pavement (300 mm x 200 mm x 150MM 38 Well Graded Material for Sub-Base - Grading I 2.36 mm below 39 Well Graded Material for Sub-Base - Grading I 53 mm to 9.5 mm 40 Well Graded Material for Sub-Base - Grading I 9.5 mm to 2.36 mm 41 Well Graded Material for Sub-Base - Grading II 2.36 mm below 42 Well Graded Material for Sub-Base - Grading II 26.5 mm to 9.5 mm 43 Well Graded Material for Sub-Base - Grading II 9.5 mm to 2.36 mm 44 Well Graded Material for Sub-Base - Grading III 2.36 mm below 45 Well Graded Material for Sub-Base - Grading III 4.75 mm to 2.36 mm 46 Well Graded Material for Sub-Base - Grading III 9.5 mm to 4.75 mm 47 Boulder with minimum size of 300 mm for Pitching at Site 48 Granular Material or hard murrum for GSB works at Site 49 Close graded Granular sub-base Material 37.5 mm to 9.5 mm 50 Close graded Granular sub-base Material 9.5 mm to 4.75 mm 51 Close graded Granular sub-base Material 4.75mm to 75 micron mm 52 Close graded Granular sub-base Material 2.36 mm 53 Coarse graded Granular sub-base Material 4.75mm to 75 micron mm 54 Coarse graded Granular sub-base Material 4.75 mm to 2.36 mm 55 Coarse graded Granular sub-base Material 9.5 mm to 4.75 mm 56 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm 57 Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm 58 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm 59 Coarse graded Granular sub-base Material 53 mm to 26.5mm 60 Stone screening material for WBM Grading-2 and 3 61 Miscellaneous Items Cement Grey PPC 62 Cement Port land (ordinary) 63 Cement white viz J.K./Birla 64 Wall Putty J.k / Birla white 65 Plaster of Parish Sakarni or eqvivalent 66 Cinder 67 Distemper oil bound 68 Dry Distemper ordinary of bes quality (Approved manufacture and approved quality viz. Burger, Asian, J&N 69 Glass Ordinary cut to size (a) 3mm thick (Wt. 7.5 Kg./sqmt.) 70 (b) 4mm thick (Wt. 10.0 Kg/sqmt.) 71 (c) 5.5 mm thick (Wt. 13.5 Kg/sqmt.) 72 White lime (unslacked) for White Washing 73 White Lead (Best Quality PIG Lead) 74 (d) G.I. Barbed wire 75 (e) Iron Sheet Galvanized Plain 22 gauge 76 (f) Iron Sheet Galvanized Plain 24 gauge 77 (g) -do- but corrugated 24 gauge 78 (h) -do- but black plain 18 gauge 79 (J) Expanded metal 2-0 cm mesh 16/17 guage 80 (K) M.S. binding wire 24 gauge 81 (i) 1x2 size of 10 gauge wire 82 (ii) 1x3 size of 10 gauge wire 83 (iii) Murga Jali 1/2x24 gauge 84 (iv) 1x2 size of 10 gauge wire 85 (i) F -d sections @ 1.58 Kg/R/M 86 (ii) F -B/T/T Secs. @ 2.40 Kg/R/M 87 (iii) F - Sections @ 0.74 Kg/R/M 88 (a) Super white 89 (b) Commercial white, coloured & black 90 Marble Dust (200 mesh) 91 Nails (Country) 92 Nails (Wire) 93 (a) Oil (linseed double boiled) 94 (b) Oil (Terpentine) 95 (a) Paint anticorosive Bitumenous 96 (b) Black Japan 97 (c) Superior Ready Mixed paints (Grade II) in 20 ltrs. Drums of approved manufactures and aporoved make 98 (i) Dark Green Oxide 99 (ii) Deep Black Oxide 100 (iii) Blue Oxide 101 (iv) Chocoiate Oxide 102 (e) (i) Red Oxide primer surface for steel (in 20 ltrs. Drum) (Approved manufactures and approved make) 103 (ii) Red lead paint ready mixed for roof (in 20 ltrs. Drum) (Approved manufactures and approved make) 104 (f)(i)PaintenamelGradeIsuperClass(Approved manufactures and approved make) 105 (ii) Paint (Aluminium) 106 (g) (i) Paint primer for wood 107 (ii) Paint primer for metal 108 (h) (i) Cement Primer of Berger or equivalent 109 (ii) Water proof cement paint (in 50 kg. drums) 110 (i) Clear synthetic (in 20 ltr drums) 111 (ii) Copall 112 (iii) Weather Coat cement paint for exterior 113 (iii) Weather Coat cement paint for exterior 114 Water Proofing compound (Dr. Fixit) 115 Polish (mansion & wax) 116 (iv) P.V.C. Pipe 110 mm dia & 6Kg./CM2 (ISI Marked) 117 (v) Same as above but 90 mm dia 118 (vi) Same as above but 75 mm dia 119 (v) Same as above but 140 mm dia 120 (a) Corrugated 121 (b) Plain 122 (i) Internal dia 5 cm (Wt. 11.41 Kg.) 123 (ii) Internal dia 7.5 cm. (Wt. 16.52 Kg.) 124 (iii) Internal dia 10 cm. (Wt. 21.67 Kg.) 125 (iii) Internal dia 15cm. (Wt. 21.67 Kg.) 126 (i) 5.0 cm dia (Wt. 2.30 Kg. ) 127 (ii)7.5 cm dia (Wt. 3.30 Kg.) 128 (iii) 10.0 cm. dia (Wt. 4.60 Kg.) 129 (i) 5.0 cm dia (Wt. 2.10 Kg. ) 130 (ii) 8.0 cm dia (Wt. 3.20 Kg.) 131 (iii) 10.0 cm. dia (Wt. 4.40 Kg.) 132 (c) C.I. Spout 23.0 cm Long 40 mm dia 133 (a) Rope (Moonj) 134 (b) Rope (HEMP) 135 (c) Rope (cotton) 136 (d) Spun yarn 137 Rivets 138 Coarse sand of approved quarry (Finess modules 2.20) at site of work in the district Saharanpur, Muzaffarnagar 139 Finesand(blendedtofineness modulus1.25) Saharanpur, Muzaffarnagar and Shamli 140 (a) Local Sand 141 Surkhi 142 White lime (slacked) 143 (a) Washers (Lumpet) 144 (b) Washers (Bitumen) 145 (c) Washers G.I. 146 J.Hooks 147 Wood presevator in 5 ltrs. Pack. 148 (a) Teak wood 149 (b) Sheesham 150 (c) Indian Sal 151 (a) Teak wood 152 (b) Sheesham 153 (c) Indian Sal/ maleshien 154 Fuel Wood (Dry) 155 (a) 2.2 cm width 156 (b) 3.50 cm. width 157 (c) Same as 48 (a) but 5 mm thick 158 (d) Same as 48 (b) but 5 mm thick 159 Antitermite treatment oil concentrate to 0.30 (as per IS 1307) 160 (i) 40mm thick 161 (ii) 50 mm thick 162 (a) KOTASTONE (machine cut ) 60 x 60 cm. 163 (a) Marble White 60 x 60 cm. 164 (b) Marble White 60 x 60 cm. 165 Granite stone black or Grey Polished 166 Granite stone black or Grey Polished 167 Polythene Sheet (125 Micron) 168 Plastic waste which is cleaned is cut into a size between 2.36mm and 600 microns and of maximum size 2.36 mm length and 2.00mm width. 169 (a) For Floor Size 300 x 300 170 (b) For Wall Size 200 x 300 171 (c) Vitrified Tiles size 600 x 600 172 RCC Hume Pipe 350mm dia 173 RCC Hume Pipe 450mm dia 174 (a) Ordinary 175 (b) For floor and tile work 176 Carpenter 177 Black Smith 178 Hammer man 179 Fitter 180 Painter 181 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 182 (a) Plumber Licensed with Kit or Koshal vikash CERTIFICATE 183 (b) Electrician Licensed with Kit or Koshal vikash certificate 184 (b) Electrician Licensed with Kit or Koshal vikash certificate 185 Mate 186 Beldar / Mali 187 Bhishti with Mushk 188 White Washer 189 Belder for bitumen or tar work 190 Glazier 191 Bhainsa Buggi with driver 192 Tractor trolley with driver excluding P.O.L. 193 Amin/Tracer 194 Chaukidar 195 Jeep/Truck/Tractor/Roller Driver 196 Generator Operator 197 Mixol Operator 198 Pump Operator 199 Cleaner 200 Sweeper (Full Time) 201 Sweeper (Part Time) 202 Tractor with harrow or water TankerTrolly with 203 Tractor with harrow or water TankerTrolly with 204 driver and P.O.L. 205 J.C.B. Machine with driver with P.O.L. 206 Crane (20-50 Tonnee) with Driver and P.O.L. 207 Ricksaw Thela with Driver 208 (a) Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) 209 (a) As in item 251 (a) above but excavation in soil mixed with Moorum, shingle, kankar requiring the use of special tools and plant such as pickaxes, sabbals etc. (where machine can not move ) 210 (a) Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. (Royality removed by Govt. ) for small works/ Abadi area. (where machine can not move ) 211 (a)Add to items (251-253) for every additional 30 M. (100 ft.) lead or part of 30 M (100 ft.) or for every additional 1.50 M. (5 ft.) lift or part of 1.50 M. (5 ft.) 212 (a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measuredat a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. 213 (i) Cleaning jungle including up rooting ofrank, vegetations grass, push, wood trees and amplings of grith upto 30 cms. measured at a height of 1 M. aboveground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. 214 (a) Same as above 259(i) above but grass only. 215 (a) Add to item no. 253 (a) for mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etc. 216 (b) As in item no. 260 (a) above but for departmental works excluding Roller charges and its fuel, cost of water, allT&P. and sundries etc. but including carriage of water to site. 217 Upto ½ Km 218 Ist Km. (If lead is beyond ½ Km.) 219 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 220 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 221 As in item 273 above but in proportion 10:5:1 222 As in item 273 above but in proportion 8:4:1 223 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 224 (b) Same as item no. 279 (a) but in proportion of 1:3:6 225 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 226 Concrete with 4 cm. guage brick ballast, white lime and surkhi in foundation and under floors in the proportion of 100:16:32 including supply of all materials, labour Tools & plants etc. required for proper completion of the work. 227 Concrete with 4 cm. gauge brick ballast, Fine sand of 1.25 F.M. and cement, in proportion of 12:6:1 in foundations and under floors, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 228 As in item 273 above but in proportion 10:5:1 229 As in item 273 above but in proportion 8:4:1 230 (a) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge 231 (b) Same as item no. 279 (a) but in proportion of 1:3:6 232 As in item 279 above but in proportions of 8:4:1stone Ballast, Coarse sand and cement. 233 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 234 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 235 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 236 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 237 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 238 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 239 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 240 As in item 309 above but for walls of one brick thick, add for extra labour 241 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 242 Same as item no. 302 (B) above but in 1:6 (One cement & six fine sand of 1.25 F.M.) mortar. 243 Same as item no. 302 (B) but in 1:5 (One cement & five fine sand of 1.25 F.M.) mortar 244 Same as item no. 302 (B) but in 1:4 (One cement & four fine sand of 1.25 F.M.) mortar. 245 (a) Same as item no. 302 (B) but in 1:4 (One cement & four Corse sand) mortar. 246 Same as item no. 302 (B) but in 1:3 (One cement & three fine sand of 1.25 F.M.) mortar. 247 Same as item no. 302 (B) but in 1:3 (One cement & three coarse sand) mortar. 248 As in item 302 (B) to 307 above but in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. 249 As in item 309 above but for walls of one brick thick, add for extra labour 250 As in item 309 above but for walls of Half brick thick, add for extra labour to the rate of item no. 309. 251 Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 252 As in item No. 401 but for sheesham wood 253 As in item no. 401 but with Indian Sal wood 254 Supply & fixing of 4.5 Cm. thick teak wood part panelled and part glazed door and window shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glass to be 4 mm. thick. Fitting with necessary screws to be supplied by the deptt. 255 Providing and fixing Glass panes with teak wood beading in doors and windows as desired by the Engineer incharge including cost of all materials, fittings, hinges, labour, T&P all etc. required for proper completion of the work. 256 As in item no. 409 above but fully panelled. 257 As in item no 409 above but fully glazed. 258 As in item no. 409 above but 3.8 cm. thick. 259 As in item no. 411 above but 3.8 cm. thick. 260 As in item no. 412 above but 3.8 cm. thick. 261 As in item no. 409 above but 3.8 cm. thick, Shisham wood. 262 As in item no. 411 above but 3.8 cm. thick, Shisham wood. 263 As in item no. 412 above but 3.8 cm. thick, Shisham wood. 264 Supply and fixing of 3.8 cm. (1½) thick Teak wood door and window shutters with panels of heavy Quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm. (1/10 or 1/12 or 1/16 inch) mesh or any other size, with necessary beadings, including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including two coat of black Japan on all iron fitting if necessary. Fitting with necessary screws to be supplied departmentally. 265 As in item (450) above but in shisham wood. 266 Supply and fixing Galvanized Mosquitos proof heavy quality S.S.Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm.x1.cm. (3x3/8)/flat iron 25 mm.x4mm. and including supply of necessary screws all materials, labour, Tools & plants etc. required for proper completion of the work. 267 As in item (455) above but with shisham wood battens. 268 As in item (455) above but with Indian Salwood battens. 269 As in item (455) above but with Deodar wood battens. 270 As in item no. 409 but Indian Commercial flush shutters 35 mm. thick (excluding cost of all fitting). 271 As in item no. 409 but Indian Commercial flush shutters 32 mm. thick (excluding cost of all fitting). 272 As above 471 but Double Leaf Add. extra. 273 Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) 274 As above item no. 473 Aluminium Fittings ISI marked. 275 Supply and fixing of 3.8 cm. (1½) thick country wood door fully panelled shutters including supply and fixing of wooden cleats stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings 276 Supply and fixing 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fitting and glass panes (Double Leaf) 277 As in item no. 9.26 above but for single leaf. 278 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 279 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 280 As in item no. 9.29 above but for single leaf. 281 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 282 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 283 As per item above A but with shisham wood batton 284 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 285 Fixing of Curtain rods (Labour only) 286 Fixing of Curtain palmets (Labour only) 287 50x20 mm 288 50x12 mm 289 With 2nd class teak wood beading 62X19 mm. 290 300x16 mm 291 250x16 mm 292 250x10 mm 293 200x10 mm 294 150x10 mm 295 Providing and fixing 12 mm thick and 100 mm. wide Ply board of plywood pelmet with 19 mm. dia Al. rod and brackets including fixing with 25x3mm. M.S. flat 10 cm (4) long and plug etc. complete with painting, polishing or oiling as required. 296 Supply and fixing of 3.2 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Double Leaf) 297 As in item no. 9.29 above but for single leaf. 298 Supply and fixing of 2.5 cm thick fully glazed laminated window-shutter of Commercial quality ISI marked plywood including cost of fittings and glass panes (Single Leaf) 299 Suppy and fixing of Teak wood batton for fixing of mosquito net and fixing of glass & over chouket at window/door. Inculding cost of all matrial, labour & T&P etc. complete. 300 As per item above A but with shisham wood batton 301 Fixing of Jali / glass in doors/windows in small area upto 1.00 sqm (Labour only) 302 Fixing of Curtain rods (Labour only) 303 Fixing of Curtain palmets (Labour only) 304 50x20 mm 305 50x12 mm 306 With 2nd class teak wood beading 62X19 mm. 307 300x16 mm 308 250x16 mm 309 250x10 mm 310 200x10 mm 311 150x10 mm 312 250x10 mm 313 200x10 mm 314 150x10 mm 315 100x10 mm 316 125 mm 317 100 mm 318 75 mm 319 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. 320 Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71 mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI C sections (39mm x 19mm x O.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric L corners .The panel shall be filled with 3mm thick high - pressure compact laminate asper manufacturers specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. bathroom door shutter). 321 With decorative veneering on one side and commercial veering on other side. 322 With non decorative veneering on both sides. 323 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 324 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 325 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 326 Same as in items 502 above but steel Z Section window excluding Glass panes.(ii) Openable panels 327 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 328 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 329 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 330 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 331 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 332 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 333 with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 334 As per item no 517a but with steel strip inplace of angle iron. 335 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 336 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 337 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 338 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 339 providing and fixing top cover for rolling shutters 2.50 meter wide. 340 Providing and fixing ball bearing for rolling shutters. 341 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 342 (b) Shutters above 16.8m² (180 sqft) area 343 (i) Door chaukhat 344 (ii) window chaukhat 345 (iii) Ventilator chaukhat 346 (iv) Stair case Nosing 347 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 348 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile B 349 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile C 350 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: profile E 351 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 352 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 353 M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. 354 Same as in item 502 above but in M.S. Grills / Stair case railing / gates / trusher / racks etc. 355 Same as in items 502 above but steel Z Section window excluding Glass panes. (i) Fixed panels 356 Same as in items 502 above but steel Z Section window excluding Glass panes. (ii) Openable panels 357 Same as in item 502 above but in heavy sizes such as trusses, built up gates, record racks, roof work, Gates etc. including rivetting or welding where necessary. 358 Boring holes in mild steel or iron not exceeding 10mm (3/8) diameter and thickness of plate not exceeding 6mm (1/4) 359 As in item (509) above but holes exceeding 10mm (3/8) diameter but not exceeding 20mm and thickness exceeding 6mm but not exceeding 13mm (1/2) 360 Providing and fixing 100mm (4) diameter C.I. Down pipe BC or equivalent make complete with bends with eye hole, plain bend shoes and gratings etc., fixed to walls with suitable clamps as directed by the Engineer-in-charge (C.I. pipe of 1.80 Meter length shall be of 20-21 Kg.) 361 Mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (No material shall be issued by deptt.) 362 Providing barbed iron wire fencing including fixing it to post after stretching it including labour and T&P etc. required for proper completion of the work but excluding cost of posts & barbed wire. (labour rate only) 363 Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½x1½x¼) angle iron 3.15 mm (1/8) thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15 length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. 364 As per item no 517a but with steel strip inplace of angle iron. 365 providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm (3/4x3/8x1/12) and braced with flat form diagonals 20x5mm (3/4x3/16) size with top and bottom rails or T-iron 40x40x6mm (1½x1½x1¼) with 38 mm dia steel pullys with bolts, nuts locking arrangement, stoppers handles complete including applying a priming coat of approved lead paint. 366 Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6mm (1½x1½x¼) angle iron 3.15mm (1/8) gusset plates at the junctions and corners, hooks at top 25mm (1) dia pulleys at bottom, 40x40x6mm (1½x1½x¼) angles and T iron guides at top and bottom respectively including locking arrangement with handles etc. Complete and applying one priming coat of approved lead paint (No material shall be issued by deptt.) 367 Supplying and fixing rollingSHUTTERS of approved make made 80x125mm (3x5) cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete but excluding the cost of top cover and springs. 368 Providing and fixing 27.5cm long wire spring grade 2 for rolling shutters. 369 providing and fixing top cover for rolling shutters 2.50 meter wide. 370 Providing and fixing ball bearing for rolling shutters. 371 (a) Shutters above 11.2 m² (120sqft) but upto 16.8m² (180 sqft) area 372 (b) Shutters above 16.8m² (180 sqft) area 373 (i) Door chaukhat 374 (ii) window chaukhat 375 (iii) Ventilator chaukhat 376 (iv) Stair case Nosing 377 Fixing of Main Gate / Steel Sutter /Garrage Gate etc. 378 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B 379 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 380 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E 381 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer on M.S. tube 12 SWG 382 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding grinding, buffing, polishing and making curvature (wherever required) and fitting and same with necessary stainless steel nuts and bolts complete, including fixing the rialing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, botls, fastners etc.) 383 Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. 384 Same as in item 574 above but Flush pointing Deduct from item 574. 385 Same as in item 574 above but in floors deduction from item 574 & 575. 386 Struck cement pointing with 1:2 cement and fine sand of 1.25 F.M. mortar with colouring including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 387 12 mmthick plaster with cement and fine sand of 1.25 fineness modules in 1:3 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. 388 As in item (582) above but with cement and approved coarse sand mortar in 1:3. 389 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:4. 390 As per Item No. 584 but with 1:4 cement and Corse sand 391 As in item (582) above but with cement and fine sand of 1.25 fineness modules mortar in 1:6. 392 Add for extra labour to all item of plaster if done ceiling. 393 Add for extra labour and materials for plaster over rough face of one brick wall. 394 2 cm. thick cement plaster in dado or skirting in 1:2 consisting of one part of cement & two parts of approved coarse sand laid in panels finished with 3 mm floating coat of neat cement or cement mixed with marble dust in ratio 5:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 395 Same as above item but 1.20cm. thick instead of 2 cm thick. 396 Engraving lines in plaster of outer face wall vertically and horizontally to display the surface as stone facing as directed by the Engineer-incharge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (add for extra labour to all items of plaster), 397 Marking drip coarse in sun shades or facie with 1:3 cement and fine sand mortar as per direction of Engineer-in-charge including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 398 20 mm thick rough cast exterior cement plaster on walls consisting 10 mm thick backing cast of 1:3 cement mortar (1 cement :3 coarse sand) and 10 mm thick finishing coat of 1:3 cement mortar (1cement :3 coarse aggregate of size 6mm to 12 mm ) including arises, chamfers and/or rounded angles not exceeding 80 mm. 399 2.5 cm (1) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2 cm. (1) graded approved stone grit, laid in panels finished with 3 mm. (1/8) floating coat of neat cement of cement and marble dust in ratio 5:1 as specified over and including 8 cm (3) thick base concrete consisting of cement, fine sand of 1.25 fineness modulus and brick ballast 4 cm. (1½) gauge in the proportion of 1:4:8 and removing any overlapping mortar at the joints of the penals if any and giving them a uniform finish, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 400 (A) As in item no. 601 above but without base concrete. 401 (B) As in item no. 601 above but base concrete consisting of brick ballast and fine sand & cement in prop. 12:6:1 402 As in item (601) above but floor shall be 4 cm (1½) thick instead of 2.5 (1) thick and without base concrete. 403 Add in item (601) to (603) and (605) when floors are polished including supply of extra cement, chapra batti, Carborandum stone, all other materials, labour, Tools & plants etc. required for proper completion of the work. Marble dust shall be added in the floting coat in ratio of 5:1 (cement and marble dust) if necessary but no extra amount will be paid for it. This includes final finish with french mansion polish or any other approved polish. 404 M-150 Brick on edge floor laid dry joints sand filled including preparation of base to proper slope and its ramming including supply of all materials labour and Tools and Plants etc. required for proper completion of the work. 405 As in item (615) above but bricks laid flat. 406 Granolithic marble flooring 2.5 cm. (1) thick consisting of 2 cm. (3/4) thick layer of 1 part cement, 2 parts of approved coarse sand and 4 parts of 2 cm. (3/4) graded approved stone chips including 5 mm (¼) thick surface coat with ordinary cement, black and white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 1.5 mm. (1/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-incharge and polished by hand or machine and finally finished with French Mansion Polish or any other approved polish and including 8 cm (3) 1:6:12, concrete base, including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work 407 As in item (620) above but when white cement is used in top 5 mm (¼) layer. 408 As in item no. (620) above but when coloured floors are to be made. 409 Granolithic marble dado 2 cm. (¼) thick consisting of 15 mm. (9/16) thick layer of one part cement, 2 parts of approved coarse sand including 5 mm. (3/16) thick surface coat with ordinary cement black or white or grey or mixed marble chips passing 3 mm. (1/8) but retained on 15 mm. (9/16) mesh screen in proportion of 1:2 as specified or directed by the Engineer-in- charge and polished by hand or by machine and finally finished with French Mansion Polish or any other approved polish including supply of all materials, labour, Tools and Plants etc. required for proper completion of the work. 410 Same as item no. 625 above but 12 mm. thick dado. 411 As in item (625) above but when white cement is used in top 5 mm. (3/16) thick layer instead of ordinary cement. 412 As in item (625) above but when coloured dados are to be made. 413 Supply and fixing 6 mm. (¼) China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants 414 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (a) of 2.2 cm. depth 415 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (b) of 3.5 cm. depth 416 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete (c) of 2.2 cm. depth and of 5 mm thickness 417 Providing and fixing glass strips of 4.00 mm (1/8) thickness in joints of floor and skirting at the time of laying labour, tools and plants etc. complete(d) of 3.5 cm. depth and of 5 mm thickness 418 Extra for making chequers of approved patterns on cement concrete, floor, steps landing etc. 419 Supply and fixing of Kota stone in floor ing 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 420 As in item no. New item (1) above but 25 mm thick. 421 Supply and fixing 10 to 12 mm thick Kota stone tiles in skirting or dado laid with 1:2 cement and approved coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 422 Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools andplants etc. required for proper completion of the work. as per direction of Engineer - in- charge 423 Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. 424 As in item (641) above but for every coat after first coat. 425 As in item (642) above but for every coat on previously painted old wood or Iron work including its sand papering, rubbing and cleaning as required for proper completion of work. 426 Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 427 As in item (644) above but for every coat after the first coat. 428 As in item (645) above but for every coat over previously painted surface 429 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked 430 As in item (647) above but for every subsequent coat on previously treated surface . 431 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 432 As in item (649) above but for every coat after the first coat. 433 As in item (649) above but for every coat after the previous coat or subsequent coat. 434 One coat hot coaltar on new surface including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 435 As in item (652) above but for every coat after the first coat or on previously treated surface. 436 One coat surface or other approved preservative on new wood work, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 437 As in item (654) above but for every coat or on previously treated surface. 438 Oiling wood work with double boiled linseed oil including supply of all materials labour, Tools & plant etc. required for proper completion of the work. 439 Removing paint or varnishing with paint remover or with caustic Soda, including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 440 Polishing with French Polish or wax polish (in proportion 2 bees wax : 1.5 linseed oil : 1 turpentine oil : 0.5 varnish by weight) on new wood and wood based surface to give an even surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 441 As in item No. (658) above but on previously polished wood or wood based surface. 442 Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 443 Same in item no. (660) but for each coat of water proof cement paint after the first two coat to give an even shade 444 Finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 445 Same aas item 660 but for weather coat. 446 Sameaasitembut over previouslypainted surface weather coat. 447 Providing cement primer on old/new surfaces 448 Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 449 Providing wall putty on old surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats 450 White washing one coat including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 451 As in item 671 above but Two coats. 452 As in item 671 above but Three coats. 453 Colour washing one coat using approved. Colouring material buff, blue, gray or brown shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 454 As in item 674 above but two coats. 455 As in item (674) but using approved colouring material of pink, green or yellow shade. 456 As in item 676 above but two coats. 457 As in item (674) above but colour washing with copper or iron sulphate one coat. 458 As in item 678 above but Two coat. 459 Cement washing including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. 460 One priming coat and one coat of dry distemper on new work including supply of all materials, labour, Tools & plant etc. reqired for proper completion of work. 461 As in item (681) but for each coat of distemper after the first coat 462 Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 463 Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). 464 As in item (692) above but in mud mortar. 465 Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 466 Dismantling Jack arched or wooden beam and barga roofs including beam, roof concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 467 As in item (695) above but only roof concrete. 468 Dismantlingcementconcreteorbrickor granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 469 As in item (697) above but floor to be stone flagged or tiled floor. 470 Dismantling corrugated Iron roofs walls or partitions,includingpurlins,battensand vertical supports and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 471 Dismantling of girders, trusses and other steel work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 472 Dismantling doors or windows including chaukhats with hold fast and including stacking of materials as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 473 Dismantling doors or windows leaves including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 474 Dismantling doors or windows including chaukhats but excluding hold fast and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 475 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). 476 Raking out joint of brick work in cement or lime morter to a depth 1 cm. (3/8) including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 477 Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in- charge within a distance of 60 metre (200 feet). 478 Supply and fixing of 10cm. (4) internal dia A.C. down pipes Everest or charminar make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3mm. (1 x1/8) fixed to walls with cement motar (1:2) and including supply of 15 cm (6) long 6mm. (1/4) dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. 479 As per item No. 730 above but for 10.0 cm. PVC down pipe.(kissan/suprime make) 480 As per item No. 730 above but for 7.5 cm. PVC down pipe. .(kissan/suprime make) 481 As per item No. 730 above but for 5.00 cm. PVC down pipe..(kissan/suprime make) 482 Providing and injecting chemical for preconstruction anttermite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrounding or pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per I.S. 6313 (part II 1981) Aldrine emulsifiable concentrate or any other approved material such as heptachlor of chlordane will be used. The rate of application of chemical emulsion shall be as follows :- 1.Treatment for massonary and foundation 5 liters per sqm. 2.Back fill in immediate contact with foundation 7.5 liters per sqm. 3.Treatment of surface of plinth filling 5 liters per sqm. 4.Treatment of soil along external perameter of Building 7.5 liters per sqm 5. Treatment of soil under external parameter 5 liters per sqm. 483 Providing & injecting chemical for post Constructional anti termite treatment with drilling holes at junction of floor with walls & pillars, the application of chemicals shall be as per relevant I.S. code and the rate of application of chemical shall also be as provided in the I.S. code, including quarterly inspection and providing required treatment for one year. As direction by the Engineer-in-charge. 484 Consolidation of Kankar by hand rammer including opening out stacks sorting kankar into three sizes, repairing patches in existing road suface with kanker making medhi to retain water and ramming and also including carriage of metal upto 30 meters (100 ft.) carriage of water 200 metre supply and maintenance of barriers and all tools and plants required for proper completion of work, kankar to be supplied to the contractor free at site. 485 (A) As in item No. 752 above but 12 cm. (loose) thick coat of stone ballast. 486 (B) As in item No. 755 (a) above but excluding roller charges. 487 (D) As in item No. 755 (a) above but upto 10 cm. (loose) thick coat. 488 (E) As item No. 755 (b) above but upto 10cm. (loose) thick coat. but excluding roller charges. 489 Water allowance to be allowed on item No. 751 to 756 including carriage & cost of water where water is not available at site. 490 Dag belling 15cm (6) deep in one line aligned with flags and jhandies as directed by Engineer- in-charge. 491 Painting white/coloured traffic lines 8-15 cm. wide in three coats with approved road making paint (spirit base) as directed by the Engineer- incharge, including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 492 Painting on divider 1 priming and two coats of enamel paint including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 493 As per item above but every coat after Ist coat and on old surface 494 Brick soling with strainght over burnt bricks laid flat and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8) depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. 495 As in item No. 762(a) above but with bricks laid on edge. 496 M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8) depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. 497 Renewing patries 1.5 metere wide including dressing surface filling upto 8cm (3) depth and making namunas, at every 15 metre apart on either side of the road true to patri template with side slopes of 1:2 etc. trenches for taking the earth to be so dug that they form a continuous side drain at road boundary. 498 Brick lining on both side of the road of M-150 bricks 7 cm. wide. 11 cm. deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-in-charge. 499 Cleaning the existing painted /primed surface and laying premix 2cm. (3/4) thick over a tack coat with graded approved grit and bitumin (labour only) including heating the paint and grit to the required temperature and mixing either in mixer/ hand drum or by manual including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge . including labour charges for tack coat. 500 As in item No. 781 above excluding T&P and sundries etc. for departmental works. 501 As in item No. 781 above but in Patches. 502 As in item No. 781(a) but in Patches. 503 Cleaning the premix surface and laying seal coat with approved 6mm (1/4) graded grit and bitumin (labour only) including heating the paint to the required temperature and mixing either in mixer, hand drum including cartage of materials, maintenance of side parties and watering them during operation for proper completion of the work as directed by the Engineer-in-charge including all T&P and sundries to be arranged by the contractor but exculding roller charges and fuel wood. 504 As in item No. 783 above but in Patches. 505 Providing and applying primer coat over prepared surface of granular base with slow setting bitumen emulsion with spray set including cleaning of W.B.M. surface spreaying primer @ 0.6 kg/sqm (excluding emulsion) all labour T & P etc. as per MORT&H Specification. (labour rate only) in patches 506 Brick soling with straight over brunt bricks laid flat and dry (labour only) including preparation of subgrade to prescribed camber, filling joints with local earth spreading a blinding coat 1 cm (3/8) depth of local earth over the entire surface and including labour T&P etc.required for proper completion of the work.. 507 As in item No. 785 above but with bricks laid on edge. 508 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(i) 350 mm dia 509 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE (ii) 600 mm dia 510 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iii) 800 mm dia 511 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(iv) 900 mm dia 512 Laying of Hume pipe in position (labour only) including labour and T&P etc. required for proper completion of the work NP-3 TYPE(v) 1000 mm dia 513 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work, (i) 350 to 600 mm dia 514 Fixing of joints in hume pipe with juit and cement etc.including cost of all matrial labour and T&P etc. required for proper completion of the work(ii) 800 to 1000 mm dia 515 (a) Laying and Consolidation of stone ballast in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 516 (b) Laying and Consolidation of Brick ballast/ bats in soling. by hand rammer for Patches.(Labour rate only) including filling of pot holes including cartage of water within 200M distance and blinding etc. Complete. 517 Barricating with approved wooden ballies vertical 10cm. Dia and 2m long fixed in ground 45 cm Deep and 2m apart including 2 rows of horizontal ballies not less than 8cm Dia 45 cm apart centre to centre tied by narial rope including cartage of all material and also including hire charges of ballies complete as direction of Engineer In charge. For two days 518 As item above but for more than 02 days. 519 As per item above but with three rows of horizontal ballies. 520 Dismantling of old brick laid on edge kharanja including stacking of old bricks . 521 As per item above but bricks laid flat / C.C. Interlocking tiles 522 Providing & laying of hot applied thermoplastic compound 2.5 m.m. thick including reflectorising glass beads @ 250 gms./Sq.mt. area. Thickness of 2.5 mm. inclusive of surface applied glass beads as per I.R.C. 2.35. The finished surface must be level, uniform and free from steaks and holes.Supplying & laying of Empty cement bags 523 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 524 Supply of 60mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 35 MPa and 4.00 kg per nos including cost of all material labour T & P .(i. ) Grey (ii ) Color 525 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 526 Supply of 80mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P (i. ) Grey (ii ) Color 527 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 528 Supply of 100mm thick ISI marked confirming to IS: 15658-2006 I shaped mechanically compressed interloking cement concerete paver blocks, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro- compression mechanism. high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The Compressive strength of concerete paver block shall not be less than 50 MPa and weight 5kg per No. confirming to IS: 15658- 2006 including cost of material, labour, T & P .(i. ) Grey (ii ) Color 529 Providing and laying of interlocking concrete Block pavement having thickness 60 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 530 Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 531 Providing and laying of interlocking concrete Block pavement having thickness 100 mm as per drawings and technical specification Clause 1504. (Exclusive G.S.B.) 532 Providing & supply gunny bags including cost of sand and stitching of bags and laying in position. 533 Laying of interlocking tiles (labour only) 534 Disposal or malba 535 primaxing carpet 20 mm 536 seal coat 537 earth work in filling 538 45-90 mm gauge stone ballast 539 53-22.4 mm gauge stone ballast 540 stone screening meterial 541 mild steel for rcc work 542 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. a) 15 mm dia. nominal outer dia Pipes 543 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargeb) 20 mm dia. nominal outer dia Pipes 544 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargec) 25 mm dia. nominal outer dia Pipes 545 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charged) 32 mm dia. nominal outer dia Pipes 546 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Chargee) 40 mm dia. nominal outer dia Pipes 547 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm dia. nominal outer dia Pipes 548 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes 549 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. c) 25 mm dia. nominal outer dia Pipes 550 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. d) 32 mm dia. nominal outer dia Pipes 551 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin- Charge. External work.. a) 15 mm dia. nominal outer dia Pipes 552 b) 20 mm dia. nominal outer dia Pipes 553 c) 25 mm dia. nominal outer dia Pipes 554 d) 32 mm dia. nominal outer dia Pipes 555 e) 40 mm dia. nominal outer dia Pipes 556 f) 50 mm dia. nominal outer dia Pipes 557 g) 62.50 mm dia. nominal outer dia Pipes 558 h) 75 mm dia. nominal outer dia Pipes 559 i) 100 mm dia. nominal outer dia Pipes 560 j) 150 mm dia. nominal outer dia Pipes 561 Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in- charge. a) 15 mm nominal bore 562 b) 20 mm nominal bore 563 Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. a) 15 mm nominal bore 564 b) 20 mm nominal bore 565 Providing and fixing ball valve (brass)ISI marked approved quality complete , High & low pressure with plastic floats complite as per direction of Engineer-in-charge.High or low pressure with plastic floats: a) 15 mm nominal bore 566 b) 20 mm nominal bore 567 c) 25 mm nominal bore 568 Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 a) 15 mm nominal bore 569 Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms. a) 15mm nominal bore. 570 Providing and fixing C.P. brass stop cock (concealed) of approved quality confirming to ISI standards IS 8931 a) 15mm nominal bore. 571 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 a) 15 mm nominal bore 572 Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in- charge. 573 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White glazed earthen ware(Indian Type)/Neycer W.C. Pan 580 mm Dia. 574 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 575 Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern 576 Single half stall urinal with 5 litre PVC. automatic flushing cistern 577 Range of two half stall urinals with 5 litre PVC. automatic flushing cistern 578 Range of three half stall urinals with 10 litre PVC. automatic flushing cistern 579 Range of four half stall urinals with 10 litre PVC. automatic flushing cistern 580 Single squatting plate with 5 litre P.V.C. automatic flushing cistern 581 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern 582 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern 583 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps 584 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 585 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 586 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 587 White Vitreous China Angle back wash basin of size 600x480 mm with single 15 mm C.P. brass pillar tap 588 White Vitreous China Angle back wash basin of size 400x400 mm with single 15 mm C.P. brass pillar tap 589 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap 590 Providing and Fixing while vitreous china pedestal for wash basin completely at the back for the reception of pipes and fittings. 591 ProvidingandfixingStainlessSteelAISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 592 510x1040 mm bowl depth 250 mm 593 510x1040 mm bowl depth 225 mm 594 510x1040 mm bowl depth 200 mm 595 470x420 mm bowl depth 178 mm 596 Long pattern W.C. pan size of 580 mm 597 Orissa pattern W.C. pan size 580x440 mm 598 Providing and fixing water vitreous china pedestal type (Eurepean type/wash down type) 599 Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer–in- charge 600 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete.10 litre capacity – white 601 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white 602 Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete. Semi rigid pipe 32 mm dia / 40 mm dia 603 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 604 Providing and fixing soil, waiste and vent pipes: 100 mm dia Sand cast iron S&S as per IS - 3989 605 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 606 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 75 mm dia meter 607 Sand cast iron S&S as per IS - 1729 608 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 609 Hubless centrifugally cast (wpun) iron pipes epoxy coated inside & outside IS 15905 610 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand): 100 mm dia 611 75 mm dia 612 50 mm dia 613 White vitreous china dual purpose W.C. pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend ISI Mark Kajaria eqvilent Indian made Brand. 614 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litre/6 litre (adjustable to 4 litre/ 8 litre), including seat cover and cistern fittings, nuts, bolts and gasket etc complete. ISI Mark Kajaria eqvilent Indian made Brand. 615 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as per standard design. 100x100 mm size P type 616 with common burnt clay (non modular) bricks of class-150 150x100 mm size p type 617 with common burnt clay (non modular) bricks of class-150 618 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg 619 560 mm diameter C.I. cover (heavy duty) the weight of the cover to be not less than 108 kg 620 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions 621 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Circular shape 450 mm internal diameter 622 Square shape 450 mm internal dimension 623 Circular shape 500 mm internal diameter 624 Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg 625 Providing and fixing toilet paper holder standrad size ISI marked C.P. brass as per direction Engineer-in-charge 626 Painting letters upto 2.5 cm. size including supply of all materials, labour & tools and plants etc. required for proper completion of the work. 627 As in item 817 above but size above 2.5 cm. but upto 8 cm. 628 As in item no. 817 above 8 cm. but upto 15 cm. 629 Repairing letters upto 2.50 cm. size including supply of all meterials labour and tool and plants etc. required for proper comletion of the work 630 As in item NO. 820 above but size above 2.5 cm. but upto 8 cm. 631 As in item NO. 820 above but size above 8 cm. but upto 15 cm. 632 Painting Border line upto 2.5 cm. wide 633 Painting Border line upto 2.5 cm. to 5 cm. wide 634 Re-Painting Border line upto 2.5 cm. wide 635 Re-Painting Border line upto 2.5 cm. to 5 cm. wide 636 Repainting and relettering number plates on ends of parapets of culverts and bridges and boader line in letters height from 2.5 cm. to 8 cm. with approved enamael paint of superior quality including supply of all materials, labour and T & P etx. required for proper completion of the work. 637 Repainting and relettering of K.M. stones as per IRC design (except 5th km. Stone) with approved enemal paint of superior quality including supply of all materials, labour and T & P etc. required for proper completion of the work. 638 As in item 832 above but 5th km. stone 639 As in item 832 above but 200 H.M. stone 640 Varnishing /Painting on chair /side rack with stand and such other items including all matrial labour T&P etc. complite for proper completion of the work. 641 Varnishing /Painting on Double bed including all matrial labour T&P etc. complite for proper completion of the work. 642 Varnishing /Painting on Singal bed/ Sofa/ Dining table including all matrial labour T&P etc. complite for proper completion of the work. 643 Cutting and repairing of walls or windows for fitting of window type A.C. inculding wooden bidding after fixing. 644 White washing and hirmichi washing of culverts and trees upto a distance of 5 M. from the edge of black top in three bends of 1 width at a height of 1 M. from the crown of the road on either side of road. including supply of all materials, labour, T & P etc. required for proper completion of the work. 645 (a) Same as above but with departmental labour 646 Retro-Reflectorised Traffic Signs Direction and place identification signs up to 0.90 sqm Size BoardProviding and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 647 Direction and place identification signsMore then 0.90 sqm Size Board Providing and erecting direction and place identification retro- reflectiorised sign as per IRC-67 made of high intensity grade sheeting the retro- reflecive sheeting type -IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67- 2012 & proof of the same in form of Government report shall be uploaded while quoting tender vide MOR&TH clause 801.3 fixed over aluminium sheeting 2mm thick with area exceeding 0.9 sqm supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing complete. as per direction E- In- Charge Note : The Composite warranty jointly signed by original manufacturer & authorized converter of at least 7 years shall be furnished on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. 648 Retro Reflective Signs (Type-IV Sheet) for single side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM. D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 649 Retro Reflective Signs (Type-IV Sheet) for both side Providing and fixing retro-reflective signboards comprising of customised modular PU Epoxy Coated MS angle iron frame work, aluminum composite panel (ACP) as base board. micro prismatic retro-reflective sheet and electro cut colored overlay film/latex printing. The horizontal and vertical members including inclined outer members of the MS frame module shall be made of pair MS angle iron. No panel size shall be more than one sqm and each panel shall be braced diagonally (one way only) with MS angle. The MS frame module shall have length not more than 3 mtr. The aluminum composite panel (ACP) shall have a thickness of 4mm with 0.5 mm thick skin of aluminum on both sides. The ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 650 Retro Reflective Signs (Type-IV Sheet) for both side ACP shall be fixed on the MS frame with pop riveting or with self taping SS screws 5mm dia spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame. On the front visible face of the ACP, micro prismatic retro-reflective sheet conforming to Type-IV of ASTM: D 4956-09 shall be pressure fixed. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. The rate include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge. Signage on MS angle frame of (35x35x5)mm 651 Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-IV 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. a) 90 cm equilateral triangle with diffinitation plate size (20 cm x 60 cm) 652 b) 60cm equilateral triangle with diffinitation plate size (20cm x 60cm) 653 c) 60 cm Circular with diffinitation plate (20 cm x 60 cm) 654 d) 80mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 655 e) 60mm x 60mm rectangular with diffinitation plate (20cm x 50cm) 656 f) 60 cm x 60 cm square with diffinitation plate ( 20 cm x 60 cm) 657 g) 90 cm high octagon 658 h) 50 x 60 cm single chevron 659 i) 155 x 60 cm Double chevron 660 j) 30 x 90 cm (Left/Right) Object Hazard 661 k) 45 x 90 cm two way Object Hazard 662 l) 30 x 90 cm +45 x 78 cm Guarded/unguarded Railway crossing 663 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 .The finished surface to be level, uniform and free from streaks and holes. Rates are inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of work. 664 Supply, fixing and hoisting of 6.00-7.00 m. spanCantilever Structure in position with one vertical post of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffners & two nos. 8 mm thick MS plates at top welded with structure of 40 mm NB (M) pipe comprising of horizontal, vertical & bracing pipe of 32 mm NB (M) as per structural design requirements & approved drawing with vertical & lateral clearance given in clause 802.2 & 802.3 including one coat of primer and two coats of synthetic enamel paint on the whole structure & installed as per clause 802.7 over a designed support system made up of concrete including excavation, lean concrete 1:4:8 cement, coarse sand and approved 20 mm grit and R.C.C. 1:2:4 with cement, coarse sand and approved 20 mm grit complete for fixing the complete structure in position as per direction of E/I charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the signage structure inclusive of all taxes, royalty, etc. all T&P/machine material and labour required for proper completion of the work. 665 Supply, fixing and hoisting of 12.00 - 15.00 M span Overhead Structure in position with two vertical posts of 6.00 M. clear height from the top of R.C.C. foundation made of 300 mm. dia pipe welded with 10 mm thick MS plate at bottom supported with 10 mm thick MS plate stiffeners & two nos.10 mm thick MS plates at top welded with structure of 50 mm NB (M) pipe comprising of horizontal, vertical pipe of 40 mm NB (M) and bracing pipe of 32 mm NB (M) as per structural design requirements and approved drawing with vertical and lateral clearance given in clause 802.2 and design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of the work. 666 Reflective Raised Pavement Marker Providing and fixing of raised 667 Reflective Raised Pavement Marker with shanks Providing and 668 Supplying & fixing of Linear Delineator System (LDS)panels made of Micro prismatic Retro Reflective sheeting Type XI duly laminated on thin aluminium foil to a unique corrugated shape to provide retro reflection across wide range of observations and external angles. Each LDS panel should be of nominal length of 33 inch and each ridge shall be approximately 0.34 inch high. Each LDS panel is to be firmly fixed on existing Concrite / brick work with 16 Nos Fastner/ screw as per IRC 79-2019 -Rates are inclusive of all taxes, royalty,etc. all T&P/machine material and labour required for proper completion of work. 669 Providing & fixing of Bollard made (Single side) out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty,etc all T&P/machine material and labour required for proper completion of work. 670 Supply & fixing of Bollard (Double side) Made out of aluminium sheet 4mm thick welded poly shaped to make it monolithic pillar size 1200mm high Bollard is having a frame 900x600mm and 600mm dia for fixation made out of 35x35x5mm angle iron and from side is fully coverd. fixing the complete structure in position as per direction of E/I. charge. With 7 years warranty. Rates include design, fabrication, supply, transportation and erection of the sign board and also inclusive of all taxes, oyalty, etc all T&P/machine material and labour required for proper completion of work. 671 Metal Beam Crash Barrier 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 672 Metal Beam Crash Barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2.0 m high, 1.5 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete 673 TREE PLATE S/F Reflective tree plate having Size 15 Cm x15Cm, Consisting type XI sheeting over 1.5mm thick aluminium sheet including labour. Material T&P etc for proper completion of the work. 674 Cartage of Ballast, Kankar, Coal, Grit or Sand etc. including loading and unloading but excluding stackings on pucca roads. I st Km. 675 2 nd Km. 676 3 th Km. 677 4 th Km. 678 5 th Km. 679 6 th Km. 680 7 th Km. 681 8 th Km. 682 9 th Km. 683 10 th Km. 684 11 th Km. 685 12 th Km. 686 13 th Km. 687 14 th Km. 688 15 th Km. 689 16 th Km. 690 17 th Km. 691 18 th Km. 692 19 th Km. 693 20 th Km. 694 21 th Km. 695 22 th Km. 696 23 th Km. 697 24 th Km. 698 25 th Km. 699 26 th Km. 700 27 th Km. 701 28 th Km. 702 29 th Km. 703 30 th Km. 704 31st to 75 Km. 705 76st to 100 Km. 706 100st to 200 Km. 707 As in item (231) above but for cement, steel or other materials : Ist Km. 708 2nd and 3rd Km. 709 4th and 5th Km. 710 6th to 10th Km. 711 11th to 20th Km. 712 21st to 30th Km. 713 31st to 50th Km. 714 51 to 75 Km. 715 76th to 100 Km. 716 101st to 200 Km. 717 201st to 250 Km. 718 As in item (231) above but for tar, bitumen Asphalt, Mobile oil or other such materials 1st Km. 719 2nd and 3rd Km. 720 4th and 5th Km. 721 6th to 10th Km. 722 11th to 20th Km. 723 21st to 30th Km. 724 31st to 50th Km. 725 51st to 75 Km. 726 76th to 100 Km. 727 101st to 200 Km. 728 201st to 250 Km. 729 Cartage of brick/stone ballast, kankar coal shingle or sand etc. by head load upto 90 metres (3 chains) including loading and unloading but excluding stacking 730 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (a) Loading 731 Loading and unloading of materials like ballast, shingle, kankar, coal or grit etc. excluding their stacking. (b) Unloading 732 Unloading of cement, tar or bitumen drum lighter steel sections and other such materials from wagons and stacking the same on platform. 733 As in item No. 236 (a) above but for heavy articles like joist etc. machinery and unwieldly structures 734 Stacking of bricks on edge in row of two to a height of ten brick and in a length of 100 bricks after dressing levelling of the site as required where bricks are to be stacked. 735 Stacking of coal, surkhi, sand, lime, stone grit, stone/brick ballast & boulders etc. to the required sizes to stacks after necessary dressing of site where such materials are to be stacked. 736 237 (a) above but when the materials are either cement / steel. 737 Loading of cement, tar or bitumen drums, lighter sections of steel and other such materials into wagons. 738 As in item 238 (a) above but for heavy articles like joist, machinery and unwieldly structures. 739 Cartage of R.C.C. Hume pipe 30cm. to 46cm. dia and 1.8 meter to 2.5 metre in length (including collars for which nothing extra will be paid ) including loading and unloading. 1st Km. 740 2nd and 3rd k.m. 741 4th and 5th k.m. 742 6th to 10th k.m. 743 11th to 20 th k.m. 744 21st to 30 th k.m. 745 31st to 50 th k.m. 746 51st to onward k.m. 747 As in item No. 239 (c) above but for R.C.C. Hume pipe 50 to 95 cm. dia and 1.8 meter to 2.5 meter in length carriage to be done by truck or by thela. 1st Km. 748 2nd and 3rd k.m. 749 4th and 5th k.m. 750 6th to 10th k.m. 751 11th to 20 th k.m. 752 21st to 30 th k.m. 753 31st to 50 th k.m. 754 51st to onward k.m.
Contract Date: Jun 15, 2026 Contract Value : Ref. Document
Local Bodies No of Bidders 10
Uttar Pradesh View Result →
Contract Date: Jun 12, 2026 Contract Value : 6.29 Lakh
Local Bodies No of Bidders 2
Contract Date: Ref. Documents Contract Value : 11.23 Lakh
Local Bodies No of Bidders 5
Madhya Pradesh View Result →
40.
Public Administrative Department #11278159 Technical Bid
Tender for Site Clearance: , Surface Dressing Of The Ground Including Removing Vegetation And In Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M. All Kinds Of Soil . , Earth Work: , Earth Work In Excavation By Mechanical Means (Hydraulic Wxcavator) Manual ,Eans In Foundation Trenches Ordrains Including Dressing Of Sides And Ramming Ofbottoms, Lift Uoto 1.5M Including Getting Out The Exavated Soil Anddisposal Of Surplus Excavated Soil As Directed Within A Lead Of 50M. , Antitermite Treatment: , Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos/Lindane Emulsifiable Concentrate Of 20%. , Back Filling Of Earth: , Filling Available Excavated Earth In Trenches Plinth Sides Of Foundation Etc.In Layer Not Exceeding 20 Cm In Depth Consolidating Each Deposited Layer By Ramming And Watering Lead Upto 50M And Lift Upto 1.5M. , Filling With Available Fly Ash And Earth In Trenches Bor Embankment In Layer With Intermediate Layer Of Compacted Earth After Every Four Layers Of Compacted Depth Of Fly Ash Sides & Top Layer Of Filling Shall Be Dine With Earth Having Total Minimum Compacted Thickness 30 Cm Or As Decided By Engineer -In- Charge Including Compacting Each Layer By Rolling Ramming And Watering All Complete As Per Drawing And Direction Of Enginner-In-Charge. , Supply & Filling In Plinth With Sand Under Floors Including Watering Ramming Consolidating And Dressing Complete. , Plain Cement Concrete , Providing And Laying In Position Cement Concrete 1:4:8 Aggregated Excluding The Cost Of Centering And Shuttering-All Work Upto Plinth Level. , Reinforced Cement Concrete Work , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring Shuttering Finishing And Reinforced-All Work Upto Plinth Level 1:1.5:3 All Works Upto Plinth Level. . , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring Shuttering Finishing And Reinforced-All Work Upto Plinth Level 1:1.5:3 All Works Above Plinth Level Upto Floor V Level. , Plinth Protection , Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation Leveling & Dressing & Finishing The Top Smooth. , Shuttering & Centering , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Foundations ,Footing ,Bases Of Column Etc. For Mass Concrete. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Columns ,Pillars,Piers, Abutments, Posts And Struts. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Suspended Floors ,Roofs,Landings, Balconies And Access Platform. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Lintels, Beams ,Plinth Beams,Girders, Bressumers And Cantilevers. , Reinforcement Of Steel , Reinforcement For Reinforced Cement Concrete Work Including Straighting Cutting,Bending,Placing In Position And Bending All Complete Themro-Mechanically Treated Bars. , Brick Work , 230Th Brick Work With Comman Burnt Clay F.P.S (Non Modular) Brick Of Class Designation 75 In Foundation & Plinth In Cement Mortar 1:6 , Brick Work With F.P.S Bricks Of Class 75 In Super Structure Above Plinth Level Up To Floor Five Level In All Shapes And Sizes In Cement Mortar 1:6 , Half Brick Masonry With F.P.S Bricks Of Class Designation 75 In Super Structure Above Plinth Level Up To Floor Five Level In Cement Mortar 1:4 , Door, Window, Ventilator , Providing And Fixing Two And Half Track Three Panels Sliding Window With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. Using R2 Series With Frame (65 Mm & Above) X (40 Mm & Above) & Glazed Sash (25 Mm & Above) X (50 Mm & Above) & Fly Screen Sash (18 Mm & Above)X (40 Mm & Above) With Zinc Alloy (Zamak) Powder Coated Touch Locks With Hook (Height Upto 1.2 Metre). , Providing And Fixing Two Track Two Panels Sliding Door With Aluminium Channel For Roller Track, Wool Pile, Zinc Alloy (Zamak) Powder Coated Handle On Every Panel Along With Multi-Point Locking System, Adjustable Nylon Rollers With Ss 304 Body. Using R3 Series With Frame (55 Mm & Above) X (40 Mm & Above) & Sash (30 Mm & Above) X (7 4 Mm & Above). (Height Upto 2.5 Metre). , Providing And Fixing Fixed Window I Ventilator With Mullion I Transom. Using R1 Series With Frame (33 Mm & Above ) X (35 Mm & Above) & Mullion (33 Mm & Above) X (50 Mm & Above). (Height Upto 0.90 Metre) , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Extruded Printed And Laminated Section Having Overall Dimension 115 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Beading On One Side, The Styles And Rails Mitred Cut And Joint At Corners By Inserting 2 Nos Pvc Profile Reinforcement Of Size 75 Mm X 200 Mm Long With Cross Section Size Of 28 Mm X 30 Mm Having Wall Thickness 2 Mm (± 0.2 Mm). Styles, Rails And Reinforcements To Be Fusion Welded Together. Only Hinge Side Vertical Style To Be Reinforced With Pvc Profile Reinforcement In Full Length , Railing Work , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Providing And Fixing Hand Rail Of Approved Size By Welding Etc. To Stee Ladder Railing, Balcony Railing, Staircase Railing And Similar Works, Including Applying Priming Coat Of Approved Steel Primer. M.S. Tube , Spiral Staircase (M.S) , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Providing And Fixing Hand Rail Of Approved Size By Welding Etc. To Stee Ladder Railing, Balcony Railing, Staircase Railing And Similar Works, Including Applying Priming Coat Of Approved Steel Primer. M.S. Tube , Plaster & Finishing Work , 12Mm Thick Plaster On The Plain In Side Of Mix 1:6 Mortar. , 15Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix. , 6Mm Thick Cement Plaster Of Ceiling Of Mix 1:6 Mortar. (Dsr 2023 -13.16.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade: New Work Over And Including Water Thinnable Priming Coat With Cement Prime. , Providing And Applying White Cement Based Putty Of Average Thickness 1Mm Of Approved Brand And Manufacturer,Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade New Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: Two Or Nore Coats On New Work Over An Under Coat Of Suitable Shade With Oridinary Paint Of Approved Brand And Manufacture. , Flooring Work , Providing And Laying Verified Floor Tiles In Different Sizes With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Make In All Colours And Shades Laid On 20Mm Thick Cement Mortar 1:4 ,Jointing With Grey Cement Slurry @3.3Kg/Sq.M Including Groutibg The Joints With White Cement And Matching Pigments Etc. Complete Size Of Tile 600 X 600 Mm. , Providing And Fixing 1St Qaulity Ceramic Glazes Floor Tiles Conforming To Is:15622 Of Approved Make In All Colours Shades Except Burgundy Bottle Green Black Of Any Size As Approved By Engineer-In-Charge In Skirting,Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortar 1:3 And Jointing With Grey Cement Slurry @3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Fixing 1St Qaulity Ceramic Glazes Wall Tiles Conforming To Is:15622 Of Approved Make In All Colours Shades Except Burgundy Bottle Green Black Of Any Size As Approved By Engineer-In-Charge In Skirting,Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortar 1:3 And Jointing With Grey Cement Slurry @3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg), Including Filling I Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. . , Providing And Laying Tactile Tile (For Vision Impaired Persons As Per Standards) Of Size 300X300x9.8 Mm Having With Water Absorption Less Than 0.5% And Conforming To Is:15622 Of Approved Make In All Colours And Shades In For Outdoor Floors Such As Footpath, Court Yard, Multi Modals Location Etc., Laid On 20 Mm Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) In All Shapes & Patterns Including Grouting The Joints With White Cement Mixed With Matching Pigments Etc. Complete As Per Direction Of Engineer-In-Charge. , False Ceiling , Providing And Fixing False Ceiling At All Heights Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Nclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X1 Ox0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre. , Water & Damp Proofing , Providing And Laying Water Proofing Treatment On Roofs Of Slabs By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying. ( , Drainage & Water Supply Works , Providing , Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 Including Testing Of Joints Etc. 150 Mm Diameter , Providing And Fixing Square-Mouth S.W Gully Trap Class Sp-1 Complete With C.I Grating Brick Masonry Chamber With Wter Tight C.I Cover With Frame Of 300X300mm Size The Weight Of Cover To Be Not Less Than 4.50Kg And Frame To Be Not Less Than 2.70Kg. As Per Standard Design. , Providing And Laying Cement Concrete 1:5:10 All Round S.W Pips Including Bed Concrete As Per Standard Design. 15Mm Dia S.W Pipe. , Constructing Brick Masonry Chamber For Underground C.I Inspection Chamber And Bends With Bricks In Cement Mortar 1:4. 455X610 Mm Iternal Dimensions Total Weight Of Cover With Frame To Be Not Less Than 38Kg Reinforced Cement Concrete Top Slab With 1:1.5:3 Mix , Providing And Fixing G.I Pipes Complete With G.I Fittings And Clsmps Including Cutting And Making Good The Walss Etc. Internal Work Exposed On Wall. , 15Mm Dia Nominal Bore , 25Mm Dia. Nominal Bore , 50Mm Dia. Nominal Bore , Providing And Fixing Ball Valve Of Approved Quality Complete High Or Low Pressure With Plastic Floats 25Mm Dia. Nominal Bore , Providing And Fixing Gun Metal Non-Return Valve Of Approved Quality :25Mm Nominal Bore. , Providing And Fixing Gun Metal Non-Return Valve Of Approved Quality :50Mm Nominal Bore. , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions 15Mm Nominal Bore. , Providing And Placing On Terrace Polyethylene Water Storage Tank Isi:12701 Marked With Cover And Suitble Locking Arrangement And Amking Necessary Holkes For Intel Outlet And Overflow Pipes But Without Fittings And The Base Vsupport For Tank. , Providing And Fixing Soil,Waste And Vent Pipes:Sand Cast Iron S&S Pipe As Per Is:1729 100Mm , Providing And Fixing Soil,Waste And Vent Pipes:Sand Cast Iron S&S Pipe As Per Is:1729 75Mm , Providing And Fixing Plain Bend Of Required Degree.100Mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Single Equalplain Invert Branch Of Required Degree.100X100x100mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Single Equalplain Invert Branch Of Required Degree.75X75x75mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Mirror Of Superior Glass And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6Mm Thick Hard Board Backing :Rectangular Shape 453X357mm. , Providing And Fixing Terminal Guard: Sand Cast Iron S&S Pipe As Peris-1729 , Providing And Fixing M.S Stays And Clamps For Sand Iron/Centrifugally Cast Iron Pipes Of Diameter:10Mm Dia. , Providing And Fixing C.P Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms.15Mm Nominal Bore. , Providing And Fixing C.P Brass Stop Cock Of Standard Design And Of Approved Make Conforming To Is:8931. 15Mm Nominal Bore. , Providing And Fixing C.P Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931. 15Mm Nominal Bore. , Providing And Fixing 450 Mm Long Towel Rail With Total Length Of 495 Mm, 78 Mm Wide And Effective Height Of 88 Mm, Weighing Not Less Than 170 Gms , Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 15 Mm Nominal Bore , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. 15 Mm Nominal Bore , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 75 Mm Diameter , Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm Height Of 75Mm With Concealed Fitting Arrangments Weighing Not Less Than 106 Gms. , Sanitary Works , Providing And Fixing One Piece Construction White Vitreous China Squatting Plate With An Integral Longitudinal Flushing Pipe, White P.V.C. Automatic Flushing Cistern, With Fittings, Standard Size G.I. / Pvc Flush Pipe For Back And Front Flush With Standard Spreader Pipes With Fittings, G.I Clamps And C.P. Brass Coupling Complete, Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Etc. Wherever Required :Range Of Two Squatting Plates With 5 Litre P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitrepous China Flat Back Or Wall Corner Type Lipped From Urinal Basin Of 430X260xx350mm And 340X410x265mm Size Respectively With Automatic Flushing Cistern With Standard Flush Pipe Abd C.P Brass Spreaders With Brass Unions And G.I Clamps Complete,Including Painting Of Fitting And Brackets Cutting And Making Good The Walls And Floors Wherver Required :One Urinal Basin With 5 Ltr. White P.V.C Automatic Flushing Cistern , Providing And Fixing Soil ,Waste And Vent Pipes Sand Cast Iron S&S Pipe As Per Is:1729 , 100Mm Dia. , 75Mm Dia. , Providing And Fixing Trap Of Self Cleaning Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete,Including Cost Of Cutting And Making Good The Walls And Floors: Sand Cast Iron S&S As Per Is-17 , Providing And Fixing Wash Basin With C.I Brackets, 15Mm C.P Brass Pillar Taps,32Mm C.P Brass Waste Of Standard Pattern,Including Painting Of Fitting And Brackets,Cutting And Making Good White Viterous China Wash Basin Size 630X450mm With Single 15Mm C.P Brass Pillar Tap , Providing And Fixing C.P. Brass Shower Rose With 15 Or 20 Mminlet: 100Mm Diameter. , Electrical Work , Wiring For Light Point/Fan Point ,Exhaust Fan Point With 1.5Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface Steel Conduit With Modular Switch,Modular Plate Suitable G.I Box For Earhting The Point With 1.5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable Isi Marked 1100 Volts Grade As Required For Group C Point Including Ceiling Rose And Lamps Holder As Required , Supplying And Fixing 5/6 Amps.Modular Type Switch On The Existing Modular Plate & Switch Box Including Cconnections But Excluding Modular Plate,Ac Etc. As Required. , Supply/Fixing 1 Or 2 Module Gi Box Of Size 75X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 3 Module Gi Box Of Size 100X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 6 Module Gi Box Of Size 200X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 8 Module Gi Box Of Size 125X125 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 12 Module Gi Box Of Size 200X150 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supplying And Fixing Following Piano Type 3Pin 5/6A Socket Outlet. , Supplying And Fixing 3 Pin 5 Amps Ceiling Rose On The Existing Junction Box/Wooden Block Including Connections Etc As Required. , Supplying And Fixing Suitable Size G.I Box With Modular Plate And Cover In Front On Surface Including providing and Fixing 3 Pin 5\6 Amps Modular Socket Outlet And 5/6 Amps Modular Switch Connections Etc. As Required. , Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate And Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Suitable Size G.I Box With Modular Plate And Cover In Front On Surface Including providing and Fixing 6 Pin 15/16 Amps And 5/6 Amps Modular Socket Outlet And 15/16 Amps Modular Switch Connections Etc As Required. , Supplying And Fixing 6 Way Double Door Surface Mounting Vertical Type 240 Volts Tpn Mcb Distribution Board Of Sheet Steel Dust Protected Duly Powder Painted,Including Of 63 Amps Tinned Copper Bus Bars,Common Neutral Link,Earth Bar,Din Bar For Mounting Mcbs Of Havells Make Model Load Line Or Its Equivalent Of Legrand/Abb/L&T/Scienmense Make Inclduing Painting Earhting Etc. As Required. , Supplying And Fixing Single Pole 5Amps-32 Amps Rating 240/415 Volts C Series Miniature Circuit Breaker Suitable For Including Loand Of Following Pole In The Existing Mcb Db Complete With Connections,Testing And Commisioning Etc As Required. , Supplying And Fixing Of 200Mm Sweep Double Ball Bearing Type Exhaust Fan Of Make Usha/Crompton/Phllips/Or Its Equivalent In All Respect As Required And Directed By Enginner-In-Charge. , Led Down Lighter (Smd Type) (System Lumen Efficacy ≥ 105 120 Lm/Watt ) Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Light. , 30 Watt , 12 -15 Watt , Led Batten Light (System Lumen Efficacy ≥105 120 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Led Surface Mounted Batten Light Of Following Body Material And Construction As Per Is : 10322 , 18- 22 Watt , Providing And Fixing 32 Amps Single Pole Mcb In Existing Cubical Panel Board Including Drilling Holes In Cubical Panel Making Connection Etc. Includingtesting And Commissioning Etc As Required. , Wiring For Circuit/Sub-Main Wiring Along With Earthwire The Following Size Of Frls Pvc Insulated Copper Conductor Single Core Cable I.S.I Marked 1100 Volts Grade In Surface/Recessed Steel Conduitas Required. , 2 X1.5 Sqmm+1X1.5 Sqmm Earth Wire , 2 X2.5 Sqmm+1X2.5 Sqmm Earth Wire , 2 X 4 Sqmm+1X4 Sqmm Earth Wire , 2 X 6 Sqmm+1X6sqmm Earth Wire , Supply , Installation,Testing And Commissiong Of 1200 Mm Sweep, Bee 5 Star Rated,Ceiling Fan. , Water Cooler , Ceiling Fan , Wall Hanging Fan , Interior Work , Furniture Work , Mid Back Mesh Revolving Chair Black , High Back Revolving Chair Black/Blue , Workstation 8 Seater (8 Seater Table) Size: 96X36X30 , Bookcase Steel (4 Shelf Glass) Size: 72X30X18 , Workstation 8 Seater (8 Seater Table) Size: 12X2x2 , Directior Table Size: 72X36X30 , 5 Seater Sofa With Table , Air Conditioner , 2 Ton 5 Star Voltas , 1 Ton 5 Star , A/C Installing Charge , Wall Stand , Computer , Hp A/O Desktop 27-Cr0902in I3-13T 8Gb/512Gb/Win/Mso , Hp A/O Desktop 24-Cr0902in I3-13T 8Gb/512Gb/Win/Ms , Hp Printer Smart Tank 580Aio P/S/C/W , Cctv Camera , Dvr Cp Plus 8Ch , Smps 10A , Bullet Camera 2.4Mp (Guard+Mic) , Dome Camera 2.4Mp (Guard+Mic) , Hdd 2Tb , Pvc Box , Bnc Connector Set , Rack 2U , Installation Charge , 3+1 Cable , 1.5 Mtr. Hdmi Cable , 32 Inch Led Smart Tv
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 8
Uttarakhand View Result →
41.
Public Administrative Department #11276744 Technical Bid
Tender for Labour Engaged For Desilting,Readjustment Of Manholes Covers, Diverting The Direction Of Water Dewatering During The Execution Of Work And Disposal Away From Site. , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Meters Lead For Thickness Of Tiles Above 25 Mm And Upto 40 Mm. , Dismantling Dressed Stone Work Ashlar Face Stone Work, Marble Work Or Precast Concrete Work Manually/By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge , Dismantling Roofing Including Ridges, Hips Valleys And Gutters Etc., And Stacking The Material Within 50 Meters Lead. , Dismantling Of Flexible Pavement (Bituminous Courses) By Mechanical Means And Disposal Of Dismantled Material Upto A Lead Of 1 Kilometer, As Per Direction Of Engineer-In-Charge. , Dismantling Manually/ Mechanically Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge: Bituminous Road. , Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge:1:4:8 Or Leaner Mix (I/C Equivalent Design Mix) , Demolishing Lime Concrete Manually/By Mechanical Means And Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Demolishing Brick Work Manually/By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge:In Cement Mortar , Demolishing Cement Concrete Manually/By Mechanical Means Including Disposal Of Material Within 50 Meters Lead As Per Direction Of Engineer-Incharge: 15.2.1 1:3:6 Or Richer Mix (I/C Equivalent Design Mix) , Demolishing Reinforced Cement Concrete Work Manually/By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Demolishing R.B Work Manually/By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Meters Lead As Per Direction Of Engineer-In-Charge. , Earth Work In Excavation By Manual Means In Trenches For Foundations, Drains, Pipes, Cables Etc. (Not Exceeding 1.5 M In Width) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed: All Kinds Of Soil : , Earth Work In Bulk Excavation By Mechanical Means (Hydraulic Excavator) Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 M2 On Plan) Including Disposal Of Excavated Earth Lead Upto 50 Meters And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. All Kinds Of Soil : , Earth Work In Surface Excavation Not Exceeding 30 Cm In Depth But Exceeding 1.5 M In Width As Well As10 Sqm On Plan Including Disposal Of Excavated Earth, Leadupto50meterand Lift Upto 1.5M, As Directed By Engineer-In-Charge.All Kinds Of Soil : , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) In Trenches For Foundations, Drains, Pipes, Cables Etc. (Not Exceeding 1.5 M In Width) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Ramming Of Bottoms Lift Upto 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed, Within A Lead Of 50 Metres:All Kinds Of Soil : , Removal Of Excavated Mulba Dismantled Or Unserviceable Material From The Site Of Work By Mechanical Transport Or Animal Transport Or Otherwise Including Loading/Unloading(Complete Job) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:4:8 (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With: 4.4.8 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With:1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement. All Works Upto Plinth Level 1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts,Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchors Blocks, Plain Window Sills, Fillets Etcupto Floor V Level, Including Curing But Excluding The Cost Of Centring, Shuttering And Finishing With.1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work In Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Upto Floor Five Level Including Curing But Excluding Cost Of Centering Shuttering, Finishing And Reinforcement. 1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) , Providing And Laying In Position Ready Mixed M-25 Grade Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , Excluding The Cost Of Centering, Shuttering Finishing And Reinforcement Including Cost Of Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer- In - Charge. Note: - Cement Content Considered In This Item Is @ 330 Kg/ Cum. Excess/ Less Cement Used As Per Design Mix Is Payable/ Recoverable Separately.All Works Upto Plinth Level , Providing And Laying In Position Ready Mixed M-25 Grade Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , Excluding The Cost Of Centering, Shuttering Finishing And Reinforcement Including Cost Of Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer- In - Charge. Note: - Cement Content Considered In This Item Is @ 330 Kg/ Cum. Excess/ Less Cement Used As Per Design Mix Is Payable/ Recoverable Separately. All Works Above Plinth Level Upto Floor V Level , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For: Foundations, Footings, Bases For Columns , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters Buttresses, Plinth And String Course Fillets, Kerbs Andsteps Etc. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Lintel, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Columns, Pillars, Piers, Abutments, Posts And Struts. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For:Edges Of Slabs And Breaks In Floors And Walls , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Suspended Floors, Roofs, Landings, Balconies And Access Platforms. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For: Arches, Domes, Vaults Upto 6 M Span , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level With Cold Twisted Bar , Steel Work Welded In Built Up Sections/Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works. , Structural Steel Work In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. Welded , Providing And Laying River Bed Material On The Road Surface By Way Of Spreading The Same In Uniform Layer Not Exceeding 20Cm In Depth, Watering And Compacting With Vibratory Power Road Roller Of 8-10 Tonne Capacity Incl Carriage Of Material From Source To Site Of Work (All Leads , Lifts Complete).The Measurement Is To Be Taken Of Compacted / Finished Work. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 M And Lift Upto 1.5 M. , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Upto 50 M And Lift Upto 1.5 M In -All Kinds Of Soil. , Providing And Fixing 60Mm Interlocked Paver Tile Over A Layer Of Cement Mortar 1:4 Mix Incl Filling Of Joints With Cement Mortar 1:3 (Complete Job) , Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand Complete All As Per Direction Of Engineer-In-Charge. 80 Mm Thick cement concrete Paver Block Of M-30 Grade With Approved Color Design And Pattern. , 12Mm Cement Plaster Of Mix: 1 : 6 ( 1 Cement : 6 Fine Sand) , 12Mm Cement Plaster Of Mix: 1 : 4 ( 1 Cement : 4 Fine Sand) , Brick Work With Common Burnt Clay (Non-Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth Including Curing In : Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand) , Extra For Brick Work With Common Burnt Clay Bricks/Cement Concrete Bricks In Superstructure Above Plinth Level Upto Floor Five Level , Tile Brick Masonry With Common Burnt Clay Tile Bricks Of Class Designation 10 In Foundation And Plinth Including Curing Complete In: Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Fine Sand) , Providing And Laying Bituminous Macadam Using Crushed Stone Aggregates Of Specified Grading Premixed With Bituminous Binder, Transported To Site By Tippers, Laid Over A Previously Prepared Surface With Paver Finisher Equipped With Electronic Sensor To The Required Grade, Level And Alignment And Rolling With Smooth Wheeled, Vibratory And Tandem Rollers As Per Specifications To Achieve The Desired Compaction And Density, Complete As Per Specifications And Directions Of Engineer-In-Charge. 50 To 100 Mm Average Compacted Thickness With Bitumen Ofgrade Vg-30 @ 3.5% (Percentage By Weight Of Total Mix) Prepared In Drum Type Hot Mix Plant Of 60-90 Tph Capacity , Supplying,Stacking, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Bound Macadam (Wbm-Iii) With Graded Crushed Stone Aggregate Of Size 53Mm To 22.4 Mm In Uniform Thickness,Hand Picking , Rolling With Vibratory Roller 8-10 Tonne Capacity In Stages To Proper Grade And Camber,Applying And Brooming Requisite Type Screening / Binding Material To Fill Up Interstices Of Coarse Aggregate,Watering And Compacting To The Required Density.Complete Job , Providing And Applying Tack Coat Using Hot Straight Run Bitumen Of Grade - Vg-30, Including Heating The Bitumen, Spraying The Bitumen With Mechanically Operated Spray Unit Fitted On Bitumen Boiler, Cleaning And Preparing The Existing Road Surface As Per Specifications. On Bitumen Surface @ 0.50 Kg/Sqm. , Hand-Packing Stones In Wire-Crates; Excluding Cost Of Crates And Stones , Providing And Applying Tack Coat Using Hot Straight Run Bitumen Of Grade - Vg-30, Including Heating The Bitumen, Spraying The Bitumen With Mechanically Operated Spray Unit Fitted On Bitumen Boiler, Cleaning And Preparing The Existing Road Surface As Per Specifications.16.38.1 On W.B.M. @ 0.75 Kg/Sqm. , Providing And Laying Seal Coat Of Premixed Fine Aggregate (Passing 2.36 Mm And Retained On 180 Micron Sieve) With Bitumen Using 128 Kg Of Bitumen Of Grade Vg-30 Bitumen Per Cum Of Fine Aggregate And 0.60 Cum Of Fine Aggregate Per 100 Sqm Of Road Surface Including Rolling And Finishing With Road All Complete , 2.5 Cm Premix Carpet Surfacing With 2.25Cum And 1.12 Cum Of Stone Chippings Of 13.2 Mm And 11.2Mm Size Respectively Per 100 Sqm And 52 Kg And 56 Kg Of Hot Bitumen Per Cum Of Stone Chippings Of 13.2 Mm And 11.2 Mm Size Respectively Including A Tack Coat With Hot Straight Run Bitumen Including Consolidation With Road Roller Of 6 To 9 Tonne Capacity Etc. Complete (Tack Coat To Be Paid For Separately). Vwith Paving Asphalt Grade Vg-30 With No Solvent , 10Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa At 35Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Specified Tile Bricks Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finishing Neat. 12.25.1 With Common Burnt Clay (Non Modular) Brick Tiles Of Class Designation 10.0 , Providing And Fixing Precoated Galvanized Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : 12.24.1 Ridges Plain (500 - 600Mm) 12.24.2 Flashings/ Aprons.(Upto 600 , Providing And Fixing 1Mm Thick M.S. Sheet Door With Frame Of 40X40x6mm Angle Iron And 3Mm M.S. Gusset Plates At The Junctions And Corners, All Necessary Fittings Complete, Including Applying A Priming Coat Of Approved Steel Primer. Using Flats 30X6mm For Diagonal Braces And Central Cross Piece. , Providing And Applying White Cement Based Putty Of Specified Thickness, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 2 Mm Thick , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade. Two Or More Coats On New Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade On New Work (Two Or More Coats Applied @ 1.67 Liter/10Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20Kg/10Sqm) , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622 Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1Cement :4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc. Complete Size Of Tile 600X600 Mm , Chequerred Precast Cement Concrete Tiles 22Mm Thick In Footpath And Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Rubbing, Cleaning And Curing Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand) . Dark Shade Using Ordinary Cement. , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Bib Cock Of Approved Quality Conforming To Is : 8931 , Providing And Fixing 15 Mm Nominal Bore C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms. , Pvc Bend , Providing And Fixing Of Pvc Pipe With All Fitting Complete Job , Providing And Fixing Of Pvc Pipe With All Fitting Complete Job , Providing And Fixing On Wall Face Un-Plasticized Rigid Pvc Rain Water Pipes Conforming To Is: 13592 Type A Including Jointing With Seal Ring Conforming To Is: 5382 Leaving 10 Mm Gap For Thermal Expansion. (I) Single Socketed Pipes 75 Mm Diametre , Providing And Fixing Of Pvc Including All Fitting With Complete Job , Providing And Fixing Of Towal Ring With All Fitting With Complete Job , Providing And Inserting Upvc Pipe ( Working Pressure4kg/ Cm2) Single Sockted Pipe 110 Mm Dia , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, Including Cutting And Making Good The Walls Etc.: Internal Work-Exposed On Wall 15 Mm Dia. Nominal Bore , Dumping Of Stone Including Cost Of Stone Filling, Including Supply Of Stone And Carriage Complete Job , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Supply Of Wire Crates Of Approved Mesh Including Weaving Binding Sides And Partitionsand Binding Top After Filling Complete Job. , Extra For Every Additional Lift Of 1.5 M Or Part There Of Beyond 1.5 M Height For Hand-Packing Of Stones In Wire-Crates , Providing And Fixing Of Weep Hole With Pvc Pipe Of 100 Mm Dia Complete Job , Providing And Fixing Of Weep Hole With Pvc Pipe Of 110 Mm Dia Complete Job , Stone Work In Super Structure Upto Floor Five Level In Cement Mortar 1:6 ( 1 Cement :6 Coarse Sand) Including Pointing With Cement Mortar 1:2 ( 1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade And Curing Complete: White Sand Stone , Stone Work Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand) Including Centering, Shuttering And Pointing With Cement Mortar 1:2 ( 1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade And Curing Complete: Red Sand Stone B White Sand Stone , Plastering With Lime Surkhi Mortar Of 20Mm Thickness Including Preparation Of Mortar, Tamping, Curing, Prepared By Traditional Methods Including Mixing Of Gur, Tamarind Water, Dal Etc. As Per Tradition, The Work Is To Be Done With All Leads And Lifts, Surfaces To Be Plastered Shall Be Thoroughly Cleaned Of All Dust, Grease, Oil Etc. All Surfaces Should Be Kept Damp During The Progress Of Work. The Engineer-In-Charge Will Inspect And Approve All Preparatory Work. Curing To Be Done For 21 Days By Means Of Spraying , Roviding And Applying Lime Kara 1:2 (1 Lime: 2 Zikki Powder) Grinding Mortar With Grinding Mill/Manually On Lime Base, On All Flat Surface In Two Coats. First Coat Applying 3 To 4 M Thick And Curing Properly At Least 7 Days, Second Finishing Coat Done After 7 Days Of Previous Coat As Per Tradtional Practice (Thickness Not More Than 6Mm). , Providing Protective Coating Of Water Repellent Siloxane (Transparent In Color) Through Brush Or Spray Until Complete Impregnation Over Completely Cleaned And Dried Stone Or Plastered Surface To Reduce The Absorption Of Water , Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Meter Lead As Per Direction Of Engineer-In-Charge. , Providing And Fixing Steel (White Powder Coated) Crescent Lock For Upvc Sliding Window/ Door With Necessary Screws Etc. Complete , Providing And Fixing Of Steel Banches , Providing And Fixing Glass Panes With Putty And Glazing Clips In Steel Door/ Windows/ Clerestory Window All Complete With 5.00Mm Thick Glass Panes Complete Job , Providing And Fixing Of Soap Dish , Providing And Fixing Inaugration Plate Including Writing Etc. Complete Job. , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Sand For An Avg Distance Of 5 Kms , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Stone Aggrigate For An Average Distance Of 7 Kms By Mt. , Carriage Of Materials By Mechanical Transport Including Loading / Unloading & Stacking Complete Brick For An Avg Distance Of 5 Kms , Electrification Items : Supply, Installation, Testing & Commissioning Of 5 Mtr Height Decorative Pole Made Of Galavnised Mild Steel Pipe Duly Polyurethane (Pu) Paint Coated With 1 Mtr. Long Double Arm Designer Bracket Is Made Of Round Tube Conforming To Is 1161. The Pole(Od Of 114.3Mm And Thickness-3.6Mm) With Bracket Is Given Pre-Treatment And Finished With Pu Paint Giving It A Pleasing Appearance And Antique Finish. Pole Shall Be Available To Hot Dip Galvanize The Tube Before Painting. Foundation Bolt Size Shall Be 20X600x4nos. With Base Plate Size 300X300x12mm. A Door Is Provided With Electrical Accessories (Connector, Bakelite Sheet And 6 annual periodical maintenance Single Pole Mcb, Cable Looping Termional For 4X4/6Sqmm Copper Cable). Aluminium Casting In Golden Ring Form At Bottom, Middle, Top Of The Pole. The Pole Will Be Supplied With Brackets And Luminaire Combinations To Suit The Requirement. Branding Name Shall Be Embossed At The Bottom Near Junction/Mcb Box. Sticker Not Allowed In The Form Of Company Branding. Pole Shall Be Supplied With Outdoor Post Top Luminaire Of 45 Watt Ip67 Mounted In Suspension Type Having An Approximate Size Of 460Mm Outer Diameter And 635Mm Height, Housing - Aluminium With Designer Steel Aesthetic Crown, Optical Grade Opal Injection Moulded/Clear Polycarbonate Diffuser And Graphite Grey Uv Resistant Colour,Constant Current Electronic, Driver Provided With High Voltage ,Open & Short Circuit Protection And Ambient Temperature -10C To +40C. Supply 150V- 240V Power Factor 0.95 ,Thd ≤ 20% Internal Surge Protection Of 4Kv With Following Specification Of Light Engine For 45W : 4500Lumens, Cct 3000K ±500 Cct ,Cri 70 And Lumen Maintenance Of L70 At 50000 Hours Ip 65 Connectors,Accessories Etc Complete With All Repects. Design Of Pole Should Be Such That It Should Maintains Proper Illumination On Both Side.(Analysis Attached) , Led Flood Light, Powder Coated Pressure Die Cast Aluminium (System Lumen Efficacy ≥105 120 Lm/Watt). Supplying, Installation, Testing & Commissioning Of Flood Light, Powder Coated Pressure Die Cast Aluminium Body With Built In Or Separate Driver As Per The Requirement With Driver Efficiency 85%, Input Voltage: Input Voltage: 140-270 Volt Ac, Frequency 50/60 Hz, Operating Temp Range -5 0C To 50 0C, Internal Surge Protection Of 5 Kv L,N,E As Per Iec 61000-4-5, Driver Efficiency 85%,Thd 10% As Per Iec 61000-3-2, P. F.≥0.95, Ip-66,Ik-10, Cri 70, Under Voltage And Over Voltage Protection, Emi-Emc As Per Cispr -15, Lenses For Beam Angle 30 Deg-120Deg As Per The Application And The Project Requirement., Suitable Tilt Able Fitting, Life Time (Led, Driver & Electrical Circuitry) Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11 Report, Cct 3000°K / 4000°K / 5700°K /6500°K (As Per Ansi Bin) , Sdcm(Standard Deviation Color Matching) 5, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Ofrelevant Bis Standard Complete In All Respect I/C External Connections With 1.5 Sq Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 120 Lm/Watt Output .Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted.. Shape Size And Cct Shall Be As Approved By Engineer-Incharge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C). 250 Watt , Led Linear Profile (Ac) Led Rgb/Rgbww/ Rgbnw/Rgba/Rgbw, Linear Profile / Wall Washer Luminaire For Façade Lighting With Aluminium Extruded/ Die Cast Housing With Inbuilt Driver Of Following Wattage. Wattage Per Meter 25W , Supply, Installation, Testing & Commissioning Of 1.1 Grade, 4Cx10 Sqmm Al. Armoured Xlpe Sheathed Cable Including Termination (Along With Lugs) , Providing And Fixing Of Gi Pipe 50 Mm Dia , Feeder Pillar 1 Phase 2 Wire, 415V, 1Nos Of 100 Amps Incoming Sp Mccbs Fitted With Outgoing 04 No 32 Amps Sp Mcbs For Service Connections, Distribution Service Pillar Suitable For Outdoor Installation , Made Out Of Crca Sheet Painted Through 7-Tank Process With Pu Painted Busbars 2P, Aluminium With Heat Shrinkable Sleeves And Adequate Capacities Complete With All Accessories 4 Way Distribution Service Pillar. Support Galvanised Angle Frame And Legs (40Mm X 40 Mm X 3Mm) For Distribution Feeder Pillar With Leg Height 1M With 0.3M In Soil Approx [email protected] Per Mtr, Earthing Complete By Gi Pipe 40 Mm Or Gi Rod 20Mm 2.5 Mtr Long Through Gi Strip.Cement Grouting For Support Angle Legs, Spares @ 3%, Erection Charges @10%, Overheads @ 5% (1.0% T&P 0.5% Storage And Handling , 3% Contingency And Safety Equipments, 0.5% Insurance) And Turnkey Factor @25% With Astronomical Timer. , Earthing With Copper Earth Plate 600Mm * 600Mm * 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Meter Long Etc. With Charcoal/Coke And Salt As Required. , Wiring For Light Point/Fans Point/Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insıslated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gf Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group-A , Add For Vetting Charges Consultency And Contigencies @ 2.5 %
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 2
Jammu And Kashmir View Result →
42.
Defence #11276668 AOC
Tender For Welcome Maintenance To Omq Area Under Ge (Af) Srinagar.-- Sl. No. Item Description 1 Preparation Of Old Decorated Plastered Or Unplastered Surfaces Of Wall Including Filling Of Holes, Cracks And Undulating Surface With Cement Wall Care Putty Making Surface Even And Smooth And Applying One Coat Of Distemper Oil Emulsion Paint (Obd), Complete All As Specified And Directed 2 Preparation Of Old Decorated Plastered Or Unplastered Surfaces Of Wall Including Filling Of Holes, Cracks And Undulating Surface With Cement Wall Care Putty Making Surface Even And Smooth And Applying Two Coats Of Distemper Oil Emulsion Paint (Obd), Complete All As Specified And Directed 3 Complete Removal Of Existing Treatment From Wall Surfaces And Applying Two Coats Of Oil Bound Distemper Of Approved Colour Including Applying 1Mm Thick Jk Birla Wall Care Putty For Making The Surface Even And Smooth And Filling The Uneven And Small Holes And Making The Edges Of Plaster Properly By Plaster Of Paris Preparatory To Distempering Including Preparation Of Surface By Washing Rubbing Down And Stopping Of Distempered Surfaces, Complete All As Specified And Directed. 4 Preparation Of Old Plastered / Unplastered Old Decorated Surfaces Of Ceiling / False Ceiling, Cornices By Brooming Down Or Steel Brushing, Scraping Down Smoke. Moulds , Moss And Efflorescence Salts, Trading Oil Greasy Spots Etc. And Applying One Coat Of Oil Bound Distemper (Obd), Complete All As Specified And Directed 5 Preparation Of Old Plastered Or Unplastered Ceiling Surfaces And Applying One Coat Of White Wash, Complete All As Specified And Directed. 6 Preparation Of Old Plastered Or Unplastered Wall Surfaces And Applying One Coat Of White Wash, Complete All As Specified And Directed. 7 Preparation Of Old Plastered Or Unplastered Wall Surfaces And Applying Two Coats Of White Wash, Complete All As Specified And Directed. 8 Preparation Of Old Painted Steel & Iron Surfaces Of Any Description Over 10Cm Width Or Girth And Applying One Coat Synthetic Enamel Paint, Complete All As Specified And Directed. 9 Preparation Of Old Painted Wood Surfaces And Wood Based Materials Of Any Description Over 10Cm Width Or Girth And Applying One Coat Synthetic Enamel Paint, Complete All As Specified And Directed. 10 Preparation Of Old Plastered Surfaces Of Wall By Washing Down, Brooming Down Or Steel Wire Brushing Etc. And Applying One Coat Cement Base Paint, Complete All As Specified And Directed. 11 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying Two Coats Of Cement Based Paint Over A Coat Of Primer, Complete All As Specified And Directed. 12 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying Two Coats Of Weather Paint (Apex) Over A Coat Of Exterior Primer, Complete All As Specified And Directed. 13 Complete Removal Of Existing Treatment From Brick Walls Or Concrete Plastered Or Unplastered Surfaces Including Scraping Down Smoke Soots, Moulds, Moss And Trading Oil And Greasy Spots Etc. Including Cornices, Pilasters Etc. And Applying One Coat Of Weather Paint (Apex), Complete All As Specified And Directed. 14 M&L For French Polishing On Surfaces Of Any Description Width Or Girth Including Cleaning And Preparing The Surface Including A Coat Of Wood Filler On New Wooden Works With Two Or More Coats, Complete All As Specified And Directed. 15 S&F In Repairs 32/40 Mm Dia Bore Pvc Flexible Pipe For Wash Hand Basin / Urinal, Complete All As Specified And Directed. 16 S&F In Repairs 15Mm Size Pvc Connections With Ptmt Nuts Of Length 450Mm, Complete All As Specified And Directed. 17 S&F In Repairs Cp Health Faucet Fixed With Spring Action And Lever Along With Flexible Shower Hose With Brass Nut Of Length 1.5M Fitted In The Existing Water Connection In The Toilets, Complete All As Specified And Directed. 18 S&F In Repairs Brass Chromium Plated Tubular Towel Rail 20Mm Dia \D\ Type 60Cm Long Between Flanges, Complete All As Specified And Directed. 19 S&F In Repairs Plastic Water Closet Seat Cover Closed Pattern With Flat Bottom Cover And Mild Steel Chromium Plated Or Aluminized Hinging Device, Complete All As Specified And Directed. 20 S&F In Repairs 15Mm Bore Bib Tap, Cast Copper Alloy, Chromium Plated, With Capstan Handle, Screwed Down, Screwed From Iron Pipe Or For Brass Ferrule, Complete All As Specified And Directed. 21 S&F In Repairs 15Mm Bore Stop Valve / Angle Valve, Cast Copper Alloy, Chromium Plated, Fancy Type, Screwed Down High Pressure With Capstan Head, Complete All As Specified And Directed. 22 S&F In Repairs 15Mm Bore Hot And Cold Water Mixer With Swan Neck For Whb Chromium Plated Quarter Turn Screwed Down, Including Necessary Fittings, Complete All As Specified And Directed. 23 S&F In Repairs 15Mm Size Sink Mixer For Mixing Hot & Cold Water, Cast Copper Alloy Chromium Plated With Capstan Heads, High Pressure, With Long Screwed Shanks And Fly Nuts, Screwed For Iron Pipe, Complete All As Specified And Directed. 24 S&F In Repairs 15Mm Bore Chromium Plated Wall Mixer 3-In-1 System Wall Mixer With Overhead And Hand Shower Arrangement With Connecting Legs, Wall Flanges And Wall Bracket For Hand Shower, Complete All As Specified And Directed. 25 S&F In Repairs 10 Litre Capacity Pvc Valveless, Syphonic Action Type, Flushing Cistern Low Level, White With Inlet Ball Valve, Float And Handle Including Brackets And Pvc Flush Pipe Etc., Complete All As Specified And Directed. 26 S&F In Repairs 5.5Mm Thick Sheet Glass Shelf Assembly Consisting Sheet Glass, Chromium Plated, 600Mm Long And 120Mm Wide With Chromium Plated Brackets, Guard Bar And Railing, Complete All As Specified And Directed. 27 S&F In Repairs Vitreous China Wash Hand Basin, White Flat Back, Size Of 550X400Mm Including Cutting For And Pinning In Ends Of Brackets (Including Supply And Fixing Of Brackets) Or Erecting Stand, 32Mm Brass Chromium Plated Waste Fitting With Long Screwed Shank And Fly Nut Flangedend Bedded In Red Led Cement, Chain And Plug And Porcelain Stopper, Complete All As Specified And Directed. 28 S&F In Repairs For 15Mm Bore Tubes, Medium Grade, Galvanised, With All Fitting, ( Such As Bends, Elbows, Tees, Short Pieces, Connectors, Back Nuts, Diminishing Pieces, Caps, Plugs, Unions Etc.) And Fixed Complete To And Ceiling With Clips, Wall Hooks, Wooden Plugs Or Laid In Floors Including Screwing And Waste And For Forged Bends On Piping As Required, Complete All As Specified And Directed. 29 S&F In Repairs For 20Mm Bore Tubes, Medium Grade, Galvanised, With All Fitting, ( Such As Bends, Elbows, Tees, Short Pieces, Connectors, Back Nuts, Diminishing Pieces, Caps, Plugs, Unions Etc.) And Fixed Complete To And Ceiling With Clips, Wall Hooks, Wooden Plugs Or Laid In Floors Including Screwing And Waste And For Forged Bends On Piping As Required, Complete All As Specified And Directed. 30 S&F 500 Litres Capacity Rotational Moulded Polyethylene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Including Dismantling Existing Water Tank And Removing From Site, Complete All As Specified And Directed. 31 Cleaning And Removing All Scale And Dirt, Etc. From Tanks And From Mouths Of Circulating Pipes, Etc Of Capacity Upto 500 Litres And Refixing The Float Valve And Plugging Wash Pipe, Complete All As Specified And Directed. 32 Cleaning And Removing All Scales And Dirt Etc. From Tanks And From Mouths Of Circulating Pipes Of Capacity Exc 500 Litres But N Exc 1000 Litres And Refixing The Float Valve And Plugging Wash Pipe, Complete All As Specified And Directed. 33 S&F In Repairs Cabinet Mirror Of Size 450X600Mm, Complete All As Specified And Directed. 34 Taking Down And Refixing Of Shutters In Same Opening After Easing And Adjusting Of Any Description Exc 1 Sqm And N Exc 2 Sqm Each Including Resecuring/Changing Of Builders Hardware, Complete All As Specified And Directed. 35 Taking Down Aluminium Door / Window Shutter Of Any Size N Exc 2.5 Sqm Each And Refixing In The Same Position / Opening After Easing And Adjusting, Tightening Of Joints Or Changes Of Hinges, Screws, Cleats, Beadings, Rubber Gasket Etc, As Per Site Requirement To Make Functional The Shutter, Complete All As Specified And Directed. 36 Taking Down Shutters Of Any Description Size Of Shutter Exc 1 Sqm But N.Exc 2 Sqm And Removing From Site Complete All As Specified And Directed. 37 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) N Exc. 1.5 Sqm And Credited To The Contractor, Complete All As Specified And Directednote: The Damaged Portion Of The Tiles / Rendering Shall Be Made Good With The Same Material To Match With The Adjacent Surface. 38 Taking Down Chowkhats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc. 1.5 Sqm But N Exc 4.0 Sqm And Credited To The Contractor, Complete All As Specified And Directednote: The Damaged Portion Of The Tiles / Rendering Shall Be Made Good With The Same Material To Match With The Adjacent Surface. 39 S&F Pressed Steel Frame For Doors With One Rebates Size Of Frame 125X60 Mm Including Necessary Fixing Lungs Hinges Lock Strike Plate Etc. Including Pcc, 1:3:6, Type C-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Back Filling Of Pressed Steel Frame, Complete All As Specified And Directed. 40 S&F Pressed Steel Frame For Doors With One Rebates Size Of Frame 105X60 Mm Including Necessary Fixing Lungs Hinges Lock Strike Plate Etc. Including Pcc, 1:3:6, Type C-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Back Filling Of Pressed Steel Frame, Complete All As Specified And Directed. 41 S&F Anodised Aluminium Powder Coated Door Shutter With Frame (Minimum Thickness Of Powder Coating 50 Micron Of Approved Colour), Partly Glazed With 5Mm Thick Tinted Glass And Partly Panelled With 9Mm Thick Prelaminated Particle Board With Both Side Decorative Laminated Including Rubber Bead Joining Cleat For Fixing In Position, Aluminium Door Handle 150Mm Size, Aluminium Barrel Tower Bolt 200Mm Size, Mortice Lock Etc. All As Specified Below, Complete All As Specified And Directed. (A) Frame (Top & Side) Section Shall Of Size 101.60 X 44.75 X 2.4Mm (Section No 14021)(B) Vertical Members Of Shutter Section Shall Be Be Of Size 85.00 X 44.45 X 2.00Mm (Section No 19560)(C) Top Members Of Shutter Section Shall Be Be Of Size 83.50 X 44.45 X 2.00Mm (Section No 19581)(D) Lock Rail (Middle Member) Of Shutter Section Shall Be Be Of Size 150.00 X 44.45 X 3.00Mm (Section No 19596)(E) Bottom Members Of Shutter Section Shall Be Be Of Size 150.00 X 44.45 X 3.10Mm (Section No 19584) (F) Glazing Clip For Securing Glass Of Shutters Shall Be Be Of 0.80Mm Thick (Section No 19370).Note:- (I) Section No Given Above Are Of Make Jindal, Contractor May Use Similar Section Of Other Make Mention In Appx A(Ii) Floor Door Spring Will Be Measured & Paid Separately. 42 S&F Aluminium Powder Coated Aluminium Window Having Three Track (Minimum Thickness Of Powder Coating 50 Micron) With Aluminium Section 92Mm X 31.75Mm (Weight Bottom Section 1.070 Kg/M, Top Section 0.933 Kg/M, Shutter Section 40Mm X 18Mm (Weight Of Handle Section 0.417 Kg/M) Interlock 0.547 Kg/Rm Mounted On Bearing To Slide On Tracks Plain Anodized In Approved Shade Including Supply And Fixing Of 5Mm Thick Plain Glass And Wire Mesh, Pvc Track Gasket, Epdm Rubber Gasket On Glass Of Weather Tightening Along With Locks, Handle Including Sealing Gap With Marble Surfaces With Silicon Sealants Making It Water Proof In All Manner Etc. Complete All As Specified And Directed. 43 S&F Aluminium Powder Coated Ventilator (Minimum Thickness Of Powder Coating 50 Micron) Having Fixed Glass With Aluminium Section Having Section 50.80Mm X 25.40Mm (Weight 0.489 Kg/M) Glazing Clear Section (Weight 0.109 Kg/M) With Plain Anodized Including Supply And Fixing Of 5Mm Thick Sun / Heat Reflected Glass Making Frame And Glass Water Tightening Making It Good Etc., Complete All As Specified And Directed. 44 S&F For Powder Coated Aluminium Grill (Thickness Or Powder Coating Not Less Than 50 Micron) Of Approved Design / Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass / Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Powder Coated Aluminium Standard Section Around The Opening, Complete All As Specified And Directed. 45 S&F Upvc Windows With, Glass 5Mm Thick Clear Tough + 12Mm Thick A, G+5Mm Clear Toughened, Profile-Mozart Premium, Colour-White, Drainage, Face, Reinforcement Standard, T-Joints, Mechanical /V-Welded, Bead-Default, Mesh-Pull Down, Handle Type Cocksper Handle, Complete All As Specified And Directed. 46 S&F 4.8Mm Thick Sheet Glass Ordinary Quality And Glazing With Aluminium Glazing Clips And Rubber Neosprine Gasket In Square Or Rectangular In Section N Exc 0.5 Sqm In Each Pane, Complete All As Specified And Directed. 47 S&F Solid Pvc Door Frame Of Size 50Mm X 47Mm Made Out Of 5Mm Plain Colour Pvc Sheet Reinforced With M.S. Square Tube, Supplying And Fixing In Opening, Complete All As Specified And Directed. 48 S&F 30Mm Thick Factory Made Solid Pvc Moulded Door Shutter With Wood Free Eps, 28 To 30Mm Thick (Stiles), With 2, 4 Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face And 2Mm Thick Plain Colour Pvc Sheet On Back Face, Suppling And Fining In Frame At Site As Per Specification And Drawing 49 S&F 35Mm Thick 2Nd Class Hardwood, Factory Made, Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc. (Without Sash Bars), Edges Of Framing Plain, Chamfered Or Rounded. Fitted With Cut And Mitred Beads For Securing Glass, Etc. Sizes Of Members Of Shutters As Specified In Ssr Part I, Section 8, Clause 8.24 (A), Complete All As Specified And Directed. 50 S&F 35Mm Thick 2Nd Class Hardwood Plain Framed, Panelled Shutter (Two Panel), Factory Made, With Lock Rail And Panel Of 9 Mm B.W.P. Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 (Part I), Kiln Seasoned And Chemically Pressure Treated, Complete All As Specified And Directed. 51 S&F In Repairs 250Mm Mild Steel Helical Door Spring Rat Tail Type Including Collar Plate And Welding If Required Or Otherwise Fixed With Screw On Wooden Frames, Complete All As Specified And Directed. 52 S&F 150Mm Size Aluminium Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And Directed. 53 S&F 100Mm Size Aluminium Anodised, Barrel Tower Bolts Of Extruded Section, Complete All As Specified And Directed. 54 S&F 150Mm Size Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed. 55 S&F 100Mm Size Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed. 56 S&F 100Mm Long Medium Weight, Cold Rolled Mild Steel Butt Hinges, Complete All As Specified And Directed.. 57 S&F 100Mm Long Floor Door Stopper Of Aluminium Alloy Body And Tongue With Rubber Cover Ends, Complete All As Specified And Directed. 58 S&F 250Mm Long Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts, Complete All As Specified And Directed. 59 S&F Mild Steel Wire Cloth 0.56Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 In Steel / Wooden Shutter Of Door & Windows, Complete All As Specified And Directed. 60 S&F 3Mm Thick Sheet Glass Ordinary Quality And Glazing With Oil Putty / Wooden Beading In Squares Not Exceeding 0.50 Sqm Including Hacking Old Glass, Complete All As Specified And Directed. 61 S&F Door Strip Comprising Of Aluminium Holds & Rubber Strip Fixed At Bottom Of Door Shutter With Screws, Complete All As Specified And Directed. 62 S&F In Repairs 18-19Mm Thick Block Board, Grade-2 Quality, Interior Grade, Commercial Type, Fixed With Screws To Timber Framework As In Kitchen Drawers, Cupboard Shutters Etc. Complete All As Specified And Directed. 63 S&F 0.90Mm Thick Decorative Laminate Type 1 Of Surface Finish, Colour And Pattern As Approved, Fixed With Approved Adhesive As Per ManufacturerS Instructions, Complete All As Specified And Directed. 64 S&F 30Mm Width Of Flaps Continuous (Piano) Hinges, Stainless Steel, Bright Finish Or Electro Galvanised, Complete All As Specified And Directed. 65 S&F In Repairs 100Mm Long Hasp And Staple, Safety Type, Brass Aluminium Anodized With Mild Steel Hinge Pin Including Bolt To Hinge Plote And Fixed With Screw, Complete All As Specified And Directed. 66 S&F In Repairs Sink With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X160Mm, Complete All As Specified And Directed. 67 S&F In Repairs Kitchen Plate Rack Made Of Stainless Steel 1Mm Thick With Plugs Washers As Overall Size Of 900Mm X 975Mm Including Fixing To Wall And All Accessories, Complete All As Specified And Directed. 68 S&F In Repairs 9Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work Or Wall Panelling / Flooring / Ceiling, Complete All As Specified And Directed. 69 Preparation Of New Wood And Wood Based Surfaces Of Any Description Exc 10Cm With Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer, Complete All As Specified And Directed. 70 S&F In Repairs Snap Grid For False Ceiling Of Size 600Mm X 600Mm Grid Exposed Grid System Fabricated With Galvanised Iron Powder Coated Section All As Shown On Serial Page No 185 Of Ssr Part Ii (2020 Print), Complete All As Specified And Directed. 71 S&F 12Mm Thick Perforated Particle Boards Or Tiles For Insulation And Acoustic Purposes, 60Cm X 60Cm In Size, Fixed With Nails To Timber Frame Workorwith Staples On Snap Grid, Complete All As Specified And Directed. 72 S&F 6Mm Thick Non Asbestos Fibre Cement Building Boards Fixed Or Laid/Inserted To Timber /Gi / Aluminium Framework With Screws To Ceiling Flat Or Sloping, Complete All As Specified And Directed. 73 S&F In Repairs 12Mm Thick Wooden Wall Panelling Of Second Class Softwood With Tongue And Groove Joint Fixed In Any Position Over And Including Wooden Framework In Second Class Softwood With Plain Fillets Square Or Sectional Area Exc 13 Sqcm And N Exc 25 Sqcm At N Exc 90 Cm Centre To Centre In Both Direction And Including Two Or More Coats Of French Polishing On All The Exposed Surfaces Wooden Panelling Including Taking Down Existing Electrical Fittings And Re-Fixing The Same, Complete All As Specified And Directed. 74 S&F In Repairs Solid Pvc Wall Lining Consisting Of 5Mm Thick Wood Grain Printed Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame Including 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specifications,Complete All As Specified And Directed. 75 S&F In Repairs Decorative Type Wallpaper Of Good Quality Surface Finish, Colour ,Design And Pattern As Required Fixed With Approved Adhesive As Per ManufacturerS Instructions As Approved, Complete All As Specified And Directed. 76 Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For, Complete All As Specified And Directed. 77 M&L For Structural Steel Work As In Truss, Rafter Purling, Made Out Of Angle / Hollow Pipe / Tube Section Including Jointing Cleats, Plates Flat Iron, Gusset Plates, Rails, Braces Etc. Conforming To Fe 410-W (Gde-E-250) Quality, Confirming To Is-1161-1979 Of Grade St-240 Complete All As Specified And As Directed. 78 S&F In Repairs 0.63Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap, With L-Type Or J-Type Or Cranked Hook Bolts, In Roofs, Walls Etc. With Grade Of Zinc Coating, Complete All As Specified And Directed. 79 S&F In Repairs Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws, Complete All As Specified And Directed. 80 S&F In Repairs Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall, Fixed With Self Tapping Screws, Complete All As Specified And Directed. 81 M&L For Tightening Bolts And Closing Bolt Holes, Etc. To Rectify The Leakage / Seepage, In Old Roof Of Corrugated Steel Sheets By Sealing With One Bitumen And One Curved Gi Washer On Either Side And 6Mm G.I. Bolts And Nuts If Required, All Set In Stiff White Lead, Complete All As Specified And Directed. 82 Preparing New Zinc (Or Galvanised) Surfaces To Receive Painting Of Any Description Over 10Cm Width Or Girth, By Coating With Mordant Solution Including Washing And Cleaning, Etc. Steel And Iron Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over One Coat Red Oxide Primer, Complete All As Specified And Directed. 83 Preparation Of Old Zinc (Or Galvanised) Steel And Iron Roof Surfaces Of Any Description Over 10 Cm Width Or Girth To Receive Painting, By Coating With Mordant Solution Including Washing And Cleaning Etc. And Applying Two Coats Of Synthetic Enamel Paint, Complete All As Specified And Directed. 84 Demolition Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc., Complete All As Specified And Directed. 85 M&L For 18-20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Jambs, Pillars, Window Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Over And Including 15Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 86 Demolition Of Reinforced Cement Concrete Of Any Description In Any Position Not Otherwise Specifically Provided For, Complete All As Specified And Directed. 87 Formwork To Soffits Of Suspended Slabs Such As Roof Slabs, Floor Slabs, Landings And Similar Work For Fair Finished Surface, Not Exceeding 200M Thick (Horizontal Or Sloping), Complete All As Specified And Directed. 88 M&L For Reinforced Cement Concrete, 1:2:4, Type B-1 (Using 20 Mm Graded Crushed Stone Aggregate) For Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like, Complete All As Specified And Directed. 89 M&L For Ms Tmt Bars 10Mm Dia And Over, Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hooking For Columns, Hooking Ends And Binding With And Including Mils Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips, Complete All As Specified And Directed. 90 S&F In Repairs 20Mm Dia Decorative Powder Coated Drapery Curtain Rods Of With Bright Finish, Including Decorative Side Domes, Brackets And A Minimum Of 8 Nos Curtain Rings In Per Running Metre Of Length, Complete All As Specified And Directed. 91 Demolition Of Brick Work Or Stone/ Boulder Masonry, Built In Cement Mortar Including All Quoins, Pillars Etc. Complete All As Specified And Directed. 92 M&L For Brick Work With Sub-Class `B Bricks (Using Old Size Bricks), Straight Or Curved On Plan Exceeding 6M Mean Radius Built In Cm 1:6, Complete All As Specified And Directed. 93 Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Etc., Complete All As Specified And Directed. 94 M&L 15Mm Thick Rendering On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 And Finishing Even And Smooth Without Using Extra Cement Using Integral Water Proofing Compound, Complete All As Specified And Directed. (Wpc Shall Be Measured And Paid Separately). 95 Supply Only Integral Water Proofing Compound, Complete All As Specified And Directed. 96 M&L For Rendering 15Mm Thick On Other Than Fair Faces Of Brick Or Concrete Surfaces In Cement Mortar 1:6, Finished Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 97 Preparation Of New Surface Of Wall And Applying Two Coats Of Cement Base Paint Over One Coat Of Primer, Complete All As Specified And Directed. 98 Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Distemper Over A Coat Of Alkali Resistant Primer, Complete All As Specified And Directed. 99 M&L For Lagging To 15Mm Bore Pipes Used In External Water Supply Or Plumbing All Around With 50Mm Thick Bonded Mineral Wool Pre-Formed ‘Snap On’ Pipe Sections Of Density 144 Kg /Cum Conforming To Is 9842 Provided With Chicken Mesh Wire Netting 25Gauge 20Mm Mesh Including Applying With Brushing Neat Cement Slurry With 3 Kg Of Cement Per Sqm Including Taking Down Of Old Lagging If Required, Complete All As Specified And Directed. 100 M&L For Lagging To 20Mm Bore Pipes Used In External Water Supply Or Plumbing All Around With 50Mm Thick Bonded Mineral Wool Pre-Formed ‘Snap On’ Pipe Sections Of Density 144 Kg /Cum Conforming To Is 9842 Provided With Chicken Mesh Wire Netting 25Gauge 20Mm Mesh Including Applying With Brushing Neat Cement Slurry With 3 Kg Of Cement Per Sqm Including Taking Down Of Old Lagging If Required, Complete All As Specified And Directed. 101 S&F In Repairs 75Mm Dia Pvc (Swr) Soil Waste And Vent Pipes Single Socketed In Any Length With Rubber Ring Joints, Laid In Trenches Or Fixed To Walls, Complete All As Specified And Directed 102 S&F In Repairs 110Mm Dia Pvc (Swr) Soil Waste And Vent Pipes Single Socketed In Any Length With Rubber Ring Joints, Laid In Trenches Or Fixed To Walls, Complete All As Specified And Directed 103 M&L For Cleaning Surface Of Sunken Portion Wall / Bottom And Applying Cement Slurry @1.2 Kg Per Sqm And Applying 15Mm Thick Cement Plastred In Cm 1:3 Finished Even And Fair Using Extra Cement And Applying Two Coats Of Acrylic Polymer Modified Cementious Slurry As Per Manufactureas Instruction To Make The Surface Leak Proof, Complete All As Specified And Directed. 104 S&F In Repairs Vitreous China Wash Down Water Closet Pan (Pedestal Pattern), White (Excluding Flushing Cistern ) Including Connection To Drain (Or Outgoing Pipe) And To Flushing Pipe, Antisyphonage Pipe, Pvc Cover Sheet In Same Colour Etc., Complete All As Specified And Directed. 105 Dismantling Of Floor Hearth Or Wall Tiling Including Cement Mortar Bedding But Not Backing Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. 106 Demolition Of Cement Concrete In Ground Floors And Pavings N Exc 15Cm Thick (Below Or Above Ground Level), Complete All As Specified And Directed. 107 M&L For 25Mm Thick Plain Cement Concrete, 1:2:4, Type B-0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Sub Base Of Floor Finish Even And Rough To Receive Further Floor Finishes (Tile/Kota Stone/ Marble ), Complete All As Specified And Directed. 108 M&L For 100Mm Thick Plain Cement Concrete, 1:2:4, Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Flooring , Laid In Alternate Bays And Finishing The Surface Even And Smooth Without Using Extra Cement, Complete All As Specified And As Directed. 109 M&L For Non Skid Ceramic Coloured Tiles 7 To 8Mm Thick (Square / Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In Coloured Cement To Match Over And Including 15Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 110 M&L For Glazed Ceramic Tile 300X600X06-7Mm Thick (Coloured) On Vertical Surfaces Such As Wall, Dados Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Shade Of Tiles Over And Including 10Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 111 M&L For Light Shade Vitrified Ceramic Tiles 8 To 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 15 Mm Thick Screed Bed In Cm 1:4, Complete All As Specified And Directed. 112 M&L For Light Shade Vitrified Ceramic Tiles 8 To 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Skirting Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Backing Coat Cm 1:4, Complete All As Specified And Directed. 113 M&L For 75Mm Thick Plain Cement Concrete, 1:4:8, Type D-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Sub Base, Complete All As Specified And Directed. 114 M&L For 100Mm Thick Plain Cement Concrete, 1:4:8, Type D-2 (Using 40 Mm Graded Crushed Stone Aggregate) As In Sub Base, Complete All As Specified And Directed. 115 M&L For 10Mm Thick Vitrified Parking Tiles Heavy Duty, Exterior Grade, Textured Finished Of Size 300X300Mm Over And Including 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:4, Complete All As Specified And Directed. 116 M&L For Chequered Cement Concrete Tiles Size 300 Mm X 300 Mm X 22-25Mm Thick With Grey Cement And Pigment , Rubber Moulded With Laquer Polish For Extra Shine, Isi Marked, Coloured, Set Jointed And Pointed In Neat Cement Slurry Over And Including 20Mm Thick Screed Bed In Cm 1:6, Complete All As Specified And Directed. 117 M&L For Strong Silicone Sealant Suitable For Roof Leak Hole, Metal Leak, Gap Filling Etc. Hole Size N Exc 5X5Mm Including Necessary Fitting And Scaffolding Height Upto 15M, Complete All As Specified And Directed. 118 S&F In Repairs Pvc Syphon Kit For One Piece, Complete All As Specified And Directed. 119 S&F In Repairs One Piece Closet Seat Cover Closed Pattern With Flat Bottom Cover And Mild Steel Chromium Plated Or Aluminized Hinging Device, Complete All As Specified And Directed. 120 S&F In Repairs 100Mm Dia Cp Grating Doom, Complete All As Specified And Directed. 121 Deduction To Be Made From Boq For Schedule A Part-Ii (Credit Schedule From Dismantling / Taking Down Items) Worth Rs 65,905.00 During Aoc.(Note :- Tenderers Shall Not Quote For This Schedule) Please Enable Macros To View Boq Information
Contract Date: Jun 29, 2026 Contract Value : 19.33 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu And Kashmir View Result →
43.
Public Administrative Department #11275323 Price Bid
Tender for Construction Of Tube-Well Upto 100 Meter Depth And Above In All Type Of Rocks By Dth System And Over Burden To Accommodate Casing Pipe Of Following Sizes In All Types Of Soils And Over Burden Including Lowering Of Casing Pipes But Excluding Cost Of Casing Pipes As Per Is : 2800 (Part I & Ii) 1979 Specifications. The Work Would Be Completed After Obtaining Sand Free Water. The Tube Well Should Have A Throughout Bore As Per Nominal Dia Of Casing Pipe 125 Mm Dia Nominal Bore , Development Of Tube Well As Per Is Specification Using Suitable Compressor To Give Sand Free Water For Required Yield Of The Gravel Packed Tube Well. , Supply Of Erw M.S. Black Casing Pipe Isi Marked (Is: 4270/1992) Of Grade Fe410 Of Following Nominal Bore Sizes At Site Of Work. , Supply And Fixing Of Tube Well Cover Of M.S. Sheet (6Mm Thick) With Nuts And Bolts Complete For Casing Size:125 Mm Dia , Supply And Fixing Of M.S. Clamp Set Of 50 ×6Mm Flat Iron With Nuts And Bolts Etc. For Holding The Riser Pipe Assembly Of Submersible Pump Set. , Supply Installation Testing and Commissioning of Radial / Mixed Flow Submersible Motor Pump Sets Isi Marked (Is:8034-1989) Of Approved Make With Required Accessories Including Making Connection Suitable For T.W./ D.C.B./ Open Well. The Job Includes Lowering Of Riser Pipe, G.I./ H.D.P.E. Pipe With Rope, Cables, Installation Of Complete Fitting And Accessories, Jointing Of Electrical Cables Up To Switch Board. All Labour For Testing Of Submersible Pumps Set And Supply Of Water To Water Mains, Complete In All Respect.100 Mm Diameter Submersible Pump Shall Have Following Hp Rating, Phase, Head, Minimum Discharge Respectively.1.5 Hp, 1-Ø, (50-130)Mtr, , Supply And Fixing Of Oil / Air Break Starter Panel Made Out Of Sheet Steel Powder Coated Enclosure Comprising Of Over Load Protection Relay, Short Circuit & Single Phasing Protection, On / Off Push Buttons, Ammeter, Voltmeter, Indicating Lamps Etc. Complete In All Respect Suitable For Following Rating Motors.For Single Phase Submersible / Monoblock Pump , Providing & Fixing Of Hdpe Pipe Isi Mark (Is:4984/95) For Water Supply (Suitable For Submersible & Jet Pump) With Required Fittings40 Mm Od 6 Kg / Cm2 , Providing Of Synthetic Rope For Submersible Pump Isi Marked (Is:5175) Of Following Sizes , Providing And Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To Is:694 With Flexible Copper Conductor Including Making Connection Etc. As Required4.0 Sq.Mm 3 Core Flat , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centring And Shuttering - All Work Upto Plinth Level :1:1½:3 (1 Cement : 1½ Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi : 12701 Marked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank: , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall20 Mm Nominal Outer Dia .Pipes. , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall20 Mm Nominal Outer Dia .Pipes. , Steel Work Welded In Built Up Sections/ Framed Work Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 15
44.
Communications and Information Technology  #11262069 AOC
Bids Are invited for Sitc Of Split Ac Units At Cto Kolkata Supply Of 1.5 Tr Inverter Type 5 Star Rated Split Air-Conditioner Unit - Supply Of 1.5 Tr Inverter Type 5 Star Rated Split Air-Conditioner Unit As Per Bee Star Rating, (As Per New Bee Rating Valid For 1St January 2026 To 31 December 2027 ) With Remote Control Unit, Filters, Rotary Type Compressor, Copper Tubes For Both Indoor And Outdoor Unit, Refrigerant Gas With Topping Up Of Refrigerant If Required, Transportation Of All Of The Above To The Various Sites And Supplying The Following Up To The Length Of 3 Mtrs Etc. As Required. (1) Hot And Cold Refrigerant Piping (2) Suitable Connecting Electrical Cable Between Indoor And Outdoor Unit. Note-- 1) The Manufacturers / Suppliers Shall Give A Warranty Of The Air Conditioner For 15 Months From Date Of Supply Or 12 Months From Date Of Installation, Which Is Earlier. Thereafter 9 Years (108 Months) Additional Warranty On The Compressor. , Dismantling Of Existing 1.5 Tr Split Ac Unit - Dismantling Of Existing 1.5 Tr Split Ac Unit - Indoor And Outdoor Units Alongwith Interconnecting Cu Pipe And Cable , Power Connection Cable Etc - And Storing At Place Shown By Exch In Charge Etc As Reqd , Installation, Testing And Commissioning Of The Split Ac Unit - Installation, Testing And Commissioning Of The Split Ac Unit At A Specified Location By Mounting And Fitting Indoor And Outdoor Units At Their Respective Locations , Laying And Fixing Of Both Liquid And Hot Gas Lines, Interconnecting Wiring For Both Indoor Outdoor Units Up To 3 Mtrs Length And ,Interconnecting The Indoor Unit And Outdoor Unit With Refrigerant Line, Insulating The Refrigerant Pipe With Expandable Polyethylene Foam Tubing Unit , Leak Testing Entire System ,Charging Refrigerant Gas In The Unit ,Making Power Supply Connections From The Power Point Etc Complete As Required. , Supplying And Fixing Extra Copper Pipe Line - Supplying And Fixing Extra Copper Pipe Line Both 1/4 Inch For Gas Line And 5/8 Inch For Liquid Line Or Suitable Dia To Match With The Pipeline Of The New Unit Along With Suitable Size Rubber Foam/Insulation On Surface Of The Wall I/C Necessary Flare Nuts, Suitably Brazing With The Existing Pipe Cl Ing, Making Holes In Walls, Same Etc., As Per Site Requirement. Note - The Length Of Refrigerant Pipes Supplied With Each Ac Units Is 3 Mtr. Extra Length Shall Be Paid Extra For Which Firm Shall Quote Their Unit Rates. , Supplying And Laying 4 Core 2.5 Sq. Mm Pvc Insulated And Pvc Sheathed Flexible Copper Cable - Supplying And Laying 4 Core 2.5Sq.Mm Pvc Insulated And Pvc Sheathed Flexible Copper Cable Along Refrigerant Pipe Or On Existing Conduit / Cable Tray I/C Binding With Plastic Tags For Extending Supply From Existing Industrial Socket To Indoor Unit Etc, As Required . (Make- Any Isi Mark ) . Note- The Length Of Copper Cable Supplied With Each Unit Is 3 Mtr . Extra Length Shall Be Paid Extra. , Supplying And Fixing Of Powder Coated Ms Frame Stand - Supplying And Fixing Of Powder Coated Ms Frame Stand Comprising Of Two Numbers Bracket Made Of Heavy Duty Ms Sheet To Accommodate The Condenser (Outdoor) Unit For Fixing On The Wall With Suitable Diameter And Length Of Anchor Fast Bolts And Making Good Damages Etc As Per Site Requirement . , Supplying And Fixing Of 20 Mm Dia Heavy Duty Pvc Pipe With Accessories For Drain Water Connection - Supplying And Fixing Of 20 Mm Dia Heavy Duty Pvc Pipe With Accessories For Drain Water Connection Where Ever Required Etc. Complete As Required.(Make- Any Isi Mark ) . , Supplying And Laying Of Pvc Insulated And Pvc Round Sheathed, 3 Core ,2.5 Sqmm, 1.1Kv Copper Cable - Supplying And Laying Of Pvc Insulated And Pvc Round Sheathed, 3 Core ,2.5 Sqmm, 1.1Kv Copper Cable ( Un-Aoumerd ) Including Connection , Testing Checking Etc As Complete As Required , Supplying And Fixing Dp Sheet Steel Enclosure On Surface Or Recess Along With 25,32A 240V - Supplying And Fixing Dp Sheet Steel Enclosure On Surface Or Recess Along With 25,32A 240V C Curve Dp Mcb Complete With Connections ,Testing And Commissioning Etc. As Complete As Reqd. Total Quantity : 126
Contract Date: Ref. Documents Contract Value : 2.79 Lakh
Government Departments No of Bidders 4
West Bengal View Result →
45.
Housing Urban and Rular Development #11260006 AOC
Tender for Excavation In Foundation In Ordinary Soil (Loam Clay And Sand) Including Lift Upto 1.50 M And Lead Upto 30M And Including Filling Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And The Side Of Foundation.S.I. No. 251 , Cement Concrete With 4 Cm Gauge With Stone Ballast Coarse Sand & Cement In Proportion 8:4:1 In Foundation I/C Supply Of All Material, Labour & T&P Required For Proper Completion Of The Work S.I. No. 281 , Cement Concrete With 2 Cm Gauge Stone Grit / Single Course Sand And Cement In Proportion Of 4:2:1 Including Supply Of All Material Labour & T&P Etc. Required For Proper Completion Of The Work Si.No. 279 (A) , M-150 Brick Work In One Cement And Three Course Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour & T&P Required For Proper Completion Of Work Si.No. 307 , 4Cm Thick Damp Proof Coarse Cement And Approved Coarse 1:2 With And Including Water Proofing Material As Odered By The Engineer In Charge Including Supply Of All Material, Labour And T&P Etc Required For Proper Completion Of The Work And Including Proper Curing & Shuttering As Necessary S.I. No. 360(C) , M-150 Brick Work In In 1:6 (One Cement And Four Fine Sand Of 1.25 F.M. Mortar) Superstructure Including Supply Of All Materials, Labour & T&P Required For Proper Completion Of Work & Also Including Labour Cess, Royalty Etc Complete.S.I. No. 309 , Reinforced Cement Concrete Work With Cement Coarse Sand And 20Mm. Gauge Grit In Prop. 1:1.5:3 In Slab Excluding Cost Of Reinforcement But Including Centering And Shuttering , Binding The Same And Cost Og Binding Wire, Supply Of All Material, Labour, T&P. Etc. Complete. , Mild Steel Or Iron In Plain Work Such As Reinforced Or Reinforce Brick Work (When Not Included In An Over All Rates) Wrougth To Required Shape Of Necessary Including Bending For Proper Complection Of The Work And Including Supply Of All Steel Etc. Complete. , 12 Mm Thick Plaster With Cement And Approved Course Sand In Proportion 1:3 Over Brick Work Minimum Thickness Not To Be Less Than 1 Cm Including Supply Of All Materials Labour And T&P Etc. Required For Proper Completion Of The Work Si.No. 583. , Providing And Laying Vitrified Floor Tiles (Bell/Kajaria/Somani Or Other Standared Make) In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absoptions Less Than 0.80 % And Conforming To Is : 15622 Of Approved Make In All Colour And Shades Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Grouting The Joints With White Cement And Matching Pigments Etc Complete Size Of Tiles 25X25 Cm. S.I. No. New Item 4 Ch. 14 , Supply & Fixing Of Commercial Quality Plywood Board Flush Shutters 32Mm. Thick Confirming To I.S. I/C Fixing Of Wooden Cleats And Stops And I/C Fixing Hinges Of Wooden Cleats And Stops And I/C Fixing Hinges, Bolt Nut Handles, Spring And Other Fitting But Ex. Their Supply And I/C Painting With Two Coats Of Black Iapan On All Iron Fittings.& Also Including Labour Cess, Royalty Etc Complelte.S.I. No 470(A) , Distempering Two Coat With Oil Bound Distemper Of Approved Brand And Manufacture And Required Shade On New Surface With Primer And Even Shade Over Including A Primer Coat With Cement Primer Of Approved Brand After Thoroughly Brushing The British Shalimar Mortar Droppings And Other Foreign Matter And Also Including Preparing The Surface Even And Sand Prepared Smooth Including Cost Of All Materials. , Providing And Fixing Chlorinated Polyviny Chlride (Cpvc) Pipes Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing This Includes Jointing Of Pipes & Fittings With One Stoep Cvpc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge Concealed Work Including Cutting Chases And Making Good The Wall Etc. 20 Mm Nominal Outer Dia Pipes Dsr 2018 No. 18.7.2 , Providing And Fixing White Veterous China Pedestal Type Water Closet (European Type) With Seat And Lid 10 Litre Low Level White Vitreous China Flushing Cistern & Cp Flush Bend With Fittings & Ci Brackets, 40Mm Flush Bend Overflow Arrangement With Specials Of Standard Make And Mostuito Proof Coupling Of Appoved Municipal Design Complete Including Painting Of Fittings And Brackets Cutting And Making Good The Walls And Floors Wherever Required. S.I. No. 17.3.1 , Providing And Fixing Water Closet Squatting Pan (Indian Type Wc Pan) With 100Mm Sand Cast Iron P Or Strap, 10 Litre Low Level While Pvc Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231 With All Fittings And Fixtues Complete Including Cuttig And Making Good The Walls And Floors Wherever Required. , Providing And Fixing Controlled Flush, Low Level Cistern Made Of Vtireous China With All Fittings Complete. S.I. No. 17.19.1 , Providing And Fixing White Vitreous China Wash Basin Including Making All Connections With But Excluding The Cost Of Fittings Flat Back Wash Basin Os Size 630X450mm S.I. No. 17.25.1 , Providing And Fixing Pvc Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete. 40Mm Dia (Flexible Pipe) S.I. No. 17.28.2.2 , Providing And Fixing 600X450 Mm Bevelled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6Mm Thick Hard Board Gournd Fixed To Wooden Cleats With Cp Brass Screws And Washers Complete S.I. No. 17.31 , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Isi 12701 Maked With Cover And Suitable Locking Arrangement And Making Necessary Holes For Intel Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. S.I. No. 18.48 , Providing And Fixnig Cp Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standard And Weighting Not Less Than 810 Gms. S.I. No. 18.50.1 , Providing And Fixing 1 Mm Thick M.S Sheet Garrage Door With Frame Of 40X40x6 Mm Angle Iron ,3.15 Mm 1/8 Thick M.S. Gusset Plates At The Junctions And Corners, Including Supply And Fixing Of Necessary Fittings. Locks Rail Of 37.5 Cm Length Using M.S Angle 40X40x5 Mm For Diagonal Bracing. S.I. No. 517(A) , Supply And Fixing Of 10Cm Internal Dia Pvc 4 Dia Down Pipe Everst Of Chrminar Make Complete With Bands With Door At Top And Plain At Bottom And Grating And Including Supply Of Necessary Ms Clamps 2.5 Cm X3mm Fixed To Walls With And Including Supply Of 10Cm Long 6 Mm Dia Nuts And Bolts Including Washer Of Required Size All Material Labour And T&P Etc Required For Proper Completion Of The Work And Also Including Repair Of Plaster Pointing Etc If Damage During Fixing Of The Pipe (S.I. No. 730)
Contract Date: Jul 01, 2026 Contract Value : 4.03 Lakh
Government Departments No of Bidders 2
Uttar Pradesh View Result →
TenderDetail
Loading tenders