View Bid Results For Pneumatic Machinery Tenders

We found 369 Bid Results related to pneumatic machinery tenders. You can find Contractor details who won pneumatic machinery tenders along with contract details in Bid awards announcements section.

Indian Tenders
8
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
250
77
42
Tender Publishing Platform
21
348
State / UT
26
134
59
45
33
15
13
10
9
8
6
4
4
4
4
3
3
3
2
2
2
1
1
1
1
1
1
Contract Value
127
45
117
79
Publish Date
1
0
0
0
0
Sector
21
77
71
55
46
25
23
17
14
9
7
6
4
3
2
2
2
2
1
1
1
1
Ownership
7
190
115
36
19
6
2
1
Within keyword
Active filters:
Showing 1–8 of 369 tenders matching your filters
1.
Housing Urban and Rular Development #11358669 AOC
Tender for Strengthening Of Road From Bs Road To Attupakkam College Boys Hostel Km 0/000 - 0/214 Head Of Attupakkam Panchayat In Nemili Block Of Ranipet District , Clearing The Scrub Jungle Including All Labour Charges For Burrying And Burning Etc., , Earth Work Excavation And Depositing On Bank Within Initial Lead And Lift In Hard Gravelly Soil For Cutting Side Drain Etc, Complete. As Per Ss20 A , Collection And Supply Of Carted Earth From Approved Quarry An Average Lead 1Km Including Cost And Conveyance Of All Materials To Site And Labour Charges Etc. , Construction Of Granular Sub-Base By Providing Close Graded Material, Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material To Work Site, Spreading In Uniform Layers With Motor Grader On Prepared Surface And Compacting With Vibratory Soil Compactor To Achieve The Desired Density, Complete As Per Clause 401 , Providing And Laying Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam(Wmm) Specification Including Premixing The Material With Water At Omc In Machanical Mix Plant Carriage Of Mixed Material By Tipper To Site Laying In Uniform Layers 250Mm Thick With Pavers In Subbase/Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density Including Cost Of Material,Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete. , Providing And Laying Prime Coat Over Wbm/ Wmm Surface Using 7 Kg Of Emulsion Bitumen (Ss1) Per 10 Sqm For Preparatory To Another Bituminous Construction Over It, Including Cost Of Material, Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete As Per Clause 502 Of Morth Rev-5 , Providing And Laying Tack Coat Over Wbm/ Wmm Surface (Treated With Primer) Using 2.50 Kg Of Bitumen Emulsion (Rs1) Per 10 Sqm For Preparatory To Another Bituminous Construction Over It Including Cost Of Material, Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete As Per Clause 503 Of Morth Rev-5 , Providing And Laying Bituminous Concrete To 25/30/40 Mm Thick Using 0.13 Cum Of 19.00-9.50Mm, 0.17 Cum Of 9.50-2.36Mm And 0.26 Cum Of 2.36 And Below With 50.30 Kgs Of Vg30/ Vg40 Bitumen For Premixing Per 10Sqm Including Cost And Conveyance Of All Materials To Cmp Site, Heating The Bitumen And Aggregate To Required Temperature And Mixing Them In Required Temperature In Central Hot Mix Plant 20-30 Ton Capacity, Conveying The Mix By Tipper Trucks To Paver Site, Spreading The Mix To Uniform Thickness Of 40Mm With Mechanical Paver To The Specified Grades And Cross Sections And Consolidated By 8-10 Tonne Vibratory / Pneumatic Roller To The Required Density Etc., Including Labour For Attending To Paver To Site Etc., Including Hire Charges And Fuel Charges For 20-30 T Cmp With Bitumen Boiler, Tipper Trucks, Paver Finisher / 9M Paver Finisher, Vibratory / Pneumatic Roller And All Other Tools And Plant Required, Including Fuel And All Other Incidental Charges Etc., Complete As Per Specification Using Cmp Using( Vibratory Roller) , Road Marking With Hot Applied Thermoplastic Compound With Reflectorising Glass Beads On Bituminous Surfaceproviding And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35. The Finished Surface To Be Level, Uniform And Free From Streaks And Holes Etc Complete As Per Mort&H Specification No.803 Road Marking With Hot Applied Thermoplastic Compound With Reflectorising Glass Beads On Bituminou S Surface , 60 Cm Equilateral Triangle , Provision For Hm Stone , cement concrete Pavement , Earth Work Excavation And Depositing On Bank With In Initial Lead Of 10 M And Initial Lift Of 2M In Hard Stiff Clay, Stiff Black Cotton Soil, Hard Red Earth, Earth Mixed With Small Sized Boulders And Hard Gravelly Soil As Per Ss 20B , Cement Concrete 1:4:8 Mix Using 40Mm Metal Including Cost And Conveyanceof All Materials To Work Site And All Labour Charges Etc. , Supplying And Erecting Of Centering For All Plain Cement Concrete Items Including Cost And Conveyance Labour Charges Etc Complete. , cement concrete 1:3:6 Mix Using 20Mm Iss Hbg Metal Including Cost And Conveyance Of All Etc.. Complete , Construction Of Unreinforment Dowel Jointed At Expansion And Construction Joints Only Plain cement concrete Pavement Thickness As Per Design Over A Prepared Sub Base With 43 Grade Cement , Supplying And Erecting Of Centering For All Plain Cement Concrete Items Including Cost And Conveyance Labour Charges Etc Complete. , Gst Amount For Providing Service To Government Contract Works For The Above Construction & Maintenance Works. { Gst Amount Is The Total Gst Amount For Overall Quoted Amount (Both Construction And Maintenance) Above This Row In Column Bb For All Works In This Package} (Refer Clause 13.2 & 13.3 Of Section 2 Of Instruction To Bidders (Itb) Of Sbd)
Contract Date: Jun 29, 2026 Contract Value : ₹ 15.60 Lakh
Local Bodies No of Bidders 3
Tamil Nadu View Result →
2.
Educational and Research Institute #11299551 Price Bid
Tender For Supply Of Library Books , Library Books (Refer Nit) , Industrial Safety And Human Behaviour Kaila 9788174734532 , Engineering Mechanics Vela Murali Bks456005 , Earthquake Resist Design Structural Shashikant Dugg Bks643652 , Surveying And Levelling Subramanian 9780198085423 , Practical Railway Engineering, 2Nd Ed Clifford Bonnett 9780000990136 , Geographic Information Systems Gis For Disaster Management 2Ed Brain 9781032552460 , Design Of Structural Elements Chanakya 9781138046436 , Wind Loading Of Structures 3Rd Edition John D. Holmes 9780367241803 , Structural Analysis 3/Ed Menon 9788184877342 , Concrete Pipes And Pipelines Joshi Bks426990 , Strength Of Materials Basavarajaiah 9788173714580 , Geotechnical Engineering Debashis Moitra 9788173719905 , Textbook Of Environmental Studies For Undergraduate Courses 3 Ed Bharucha 9789389211788 , Intelligent Transportation Systems Srinivasa Kumar 9788195400928 , Transportation Engineering Srinivasa Kumar 9789389211160 , Structural Analysis With Finite Elements Hartmann 9788132208945 , Strength Of Materials Vol 1 Binu Sukumar 9789388005029 , Geospatial Technology Dwivedi 9789380381480 , Heavy Metal And Metalloid Contamination Of Surface And Underground Water Gupta A. 9781032728582 , Fundamentals Of Environmental Engineering Danny D Reible 9781566700474 , Computer-Aided Highway Engineering S Goswami 9781032728483 , Fundamentals Of Hydrology Davie 9781032251936 , Highwall Mining : Applicability, Design & Safety Porathur J. L. 9781032728919 , Environmemtal Pollution Control Engineering 4Ed Rao 9788122472288 , Plane Surveying 3Ed Chandra 9788122438802 , Design Of Reinforced Cement Concrete Vol 1 Structural Elements Bhavikatti 9788122440515 , Strength Of Materials, 2/Ed Jindal 9789352861521 , Fundamentals Of Hydraulic Engineering Sy Houghtalen 9789332507593 , Geotechnical Engineering Coduto,Yeung 9789332587427 , Strenth Of Materials Jindal 9788131759097 , Dynamics Of Structures 2Nd Ed Jain 9789357059350 , Finite Element Method With Cd Eldho Desai Shah 9788131724644 , Soil Mechanics And Foundation Engineering Purushotama Rai 9788131790816 , Engineering Mechanics - Statics & Dynamics Shames Rao 9788177581232 , Dynamics Of Structures In Si Unites 5Ed Chopra 9789353945251 , Elementary Engineering Hydrology Deodhar 9788131708057 , Environmental Studies Basak 9788131721186 , Introduction To Finite Elements In Engineering 5/E Tirupathi 9781009461818 , Strength Of Materials Rao 9781108454285 , Plumbing Engineering Nikhil Anthony 9788119365128 , Fundamental Of Ground Improvement Engi Prof.Dr.R.K. Khit 9788195916948 , Surveying And Levelling : Part - 1 Kanetkar Kulkarni Bks644037 , Surveying And Levelling : Part - 2 Kanetkar Bks644038 , A Textbook Of Strength Of Materials Rajput 9789355010704 , Building Construction Bhavikatti 9789325960794 , Fundamental Of Reinforced Concrete Chandra Bks498526 , Irrigation Engineering And Hydraulic Structures Sharma Bks535826 , Surveying I Anne Mary 9788183717304 , Highway Engineering Subramanian 9788183716888 , Strength Of Materials Bansal Bks534222 , Reinforced Cement Concrete Design (Reinforeced Concrete Structures) Punima 9788131809426 , Building Construction Rangwala Bks502124 , Civil Engineering Drawing Rangwala Bks440591 , Soil Mechanics & Foundation Engineering Modi 9788189401306 , Engineering Materials Rangwala Bks385325 , Bridge Engineering Rangwala Bks554100 , Harbour Dock And Tunnel Engineering Srinivasan Bks502125 , Solid Hazardous Watse Management 2Ed Rao 9789389354621 , Textbook Of Remote Sensing And G.I.S 4Ed Reddy 9789381075975 , Reinforced Concrete Design P.B Sharma 9789391910419 , Energy Environment Ecology And Society Anil Kumar 9788178002576 , Solved Problems In Geotecnical Engineering Sharma 9789395038478 , Highway Engineering Suganthi Bks411034 , Highway And Railway Engineering Santhanam Bks638485 , Construction Materials & Tech Mathankumar Bks638450 , Prefabricated Structures Soundrarajan Bks638488 , Structural Analysis-I Santhanam Bks479564 , Green Building Design Molykutty Bks503088 , Irrigation Engineering Basak 9780074635384 , Estimating Construction Costs Peurifoy 9780071239455 , Design Of Steel Structure Duggal 9780070260689 , Concrete Technology Gambhir 9781259062551 , Engineering Mechanics Timoshenko 9781259062667 , Flow In Open Channels Subramanya 9789353166298 , Reinforced Concrete Design 4Ed Pillai 9789354601026 , Surveying Vol - Ii 5Th Edn Duggal 9789353167523 , Surveying And Levelling Basak 9789332901537 , Prestressed Concrete 6Ed Krishna Raju 9789387886209 , Fluid Mechanics White 9789355322043 , Strength Of Materials Rattan 9789385965517 , Surveying Vol - 1 Duggal 9789353167509 , Environmental Studies-3Ed Joseph 9789352605170 , Construction Planning, Equipment Peurifoy 9780070706996 , Fluid Mechanics Fundamentals And Applic Cengel 9789353166212 , Schaums Outline Of Finite Element Analysis Buchanan 9789389691375 , Wind Energy Theory And Practice 3Ed Ahmed Bks662294 , Bituminous Road Construction In India Kandhal 9789391818821 , Mechanics Of Composite Structures Vasiliev 9781138582101 , Satellite Towns In Neometropolitan Development In India Amit Chatterjee 9789811932052 , Sustainable By Design Walker 9781032973685 , Management Of Quality In Construction Ashford 9781138607163 , Disaster Managament 2/Ed Pandey 9789357461610 , Remote Sensing And Image Interpretation Thomas Lillesand 9789354642104 , Composite Structures Of Steel And Concrete 3Ed Johnson 9788126539819 , Strength Of Materials 2Nd/Ed Debabrata Nag 9788126534876 , Reasoning Ability And Quantitative Aptitude Tcy Online 9788126559008 , Green It Strategies And Applications Using Envir Intell Bhuvan Unhelkar 9781032054025 , Bioenergy For Sustainability And Security Behera 9789381891438 , Textbook Of Engineering Geology Annadurai 9789385259937 , Structural Dynamics Mukhopadhyay 9788180520907 , Matrix And Finite Element Analysis Mukhopadhyay 9788180520754 , Irrigation Engineering & Hydraulic Structures Suresh 9789383656899 , Strength Of Materials 2Ed Vendateshan 9789383656646 , Concrete Technology Job Thomas 9788131526682 , Steel Design Segui 9788131526651 , A First Course In The Finite Element Methods Logan 9789353507855 , Civil Engineering Materials Sivakugan Tuladhar 9789386650382 , Soil And Water Conservation Engineer Fangmeier 9788131524985 , Principles Of Foundation Engineering 9Th Ed Das 9789355738110 , Elements Of Civil Engineering Balasubramanya 9789387511576 , Soil Mechanics & Foundation Engineering Huat Prasad 9788131529591 , Principles Of Foundation Engineering Das 9789386650955 , Analysis Of Structures On Elastic Tsudik 9788131518953 , Strength Of Materials : Mechanics Gupta 9789355737717 , Steel Design With Mt Segui 9789386650887 , Prestressed Concrete Structures, 6Ed Dayaratnam 9788120417915 , Fundamentals Of Reinforced Cement Concrete Designs Gahlot 9789385915611 , Instrumental Methods Of Analysis Willard 9788123909431 , Tb Of Soil Mechanics And Foundation Engineering:Geo Technical Engg Murthy 9788123913629 , Civil Engineering Through Objective Type Questions 3Ed Gupta 9788123907970 , Advanced Reinforced Concrete Design 3Ed Raju 9788123929606 , Design Of Reinforced Concrete Structures 4Ed Dayaratnam 9788120414198 , Structural Dynamics Paz 9788123909783 , Modern Prestressed Concrete Libby Bks465269 , Textbok Of Solid Wastes Managemnt Khan 9788123909448 , Analysis & Design Of Substructures, 2Ed Swami Saran 9788120417007 , Building Repair And Maintance Management Gahlot 9788123912431 , Advanced Foundation Engineering Murthy 9788123915067 , Modern Construction Management 7Ed Harris 9788126572298 , Groundwater Hydrology Rushton 9788126539772 , Textbook Of Highway And Traffic Engineering Saxena 9788123924175 , Airport Engineering Saxena 9788123915500 , Construction Dewatering And Groundwater Control 3Ed Powers 9788126541669 , Quality Management Of Cement Concrete Construction (Pb) Gahlot 9788123916989 , Tb Of Water Supply And Sanitary Engineering Husain 9788120416833 , Design Of Bridges 5Ed Raju 9788120417984 , Essentials Of Bridge Engineering 6Ed Victor 9788120417175 , Building Construction Handbook Chudley 9789381269169 , Design And Construction Of Concrete Shell Roofs Ramasamy 9788123909905 , Strength Of Materials, Vol-Ii:Advanced Theory And Problems Timoshenko 9788123910772 , Construction And Project Managment 2Ed (Pb 2018) Krishnamurthy 9789386217790 , Water And Wastewater Calculations Manual 2Ed Lin 9789353162863 , Design Of Stell Structures Abu-Saba 9788123905389 , Prestressed Concrete Problems And Solutions Raju 9788123925424 , Water Resources And Irrigation Engineering Ganesaguru Bks588955 , Dam Engineering Asthana 9789381891469 , Sedimentary Rocks In The Field A Colour Guide Stow 9781874545699 , Soil Mechanics Basic Concepts & Engineering Aysen 9780415383936 , A Tb Of Fluid Mechanics And Hydraulic Machines Bansal Bks493063 , Intelligent And Sustainable Cement Production Chatterjee A.K. 9781032728445 , Total Quality Management 5Ed Besterfield 9789353066314 , Matrix Methods Of Structural Analysis Kothandaraman 9789357059190 , Hydraulics And Fluid Mechanics Hydraulic Machine Modi , Seth Bks291963 , Limit State Design Of Steel Structures Duggal 9789353164874 , Schaums Outline Of Reinforced Concrete Everard 9789389538656 , Earthquake Resistant Design Of Structures Agarwal Bks344533 , Building Materials Varghese 9788120350915 , Total Quality Management 2Ed Mukerjee 9788119364299 , Principles Of Geotechnical Engineering 10 Th Ed Das 9789355738103 , Building Materials Products Properties And Systems Gambhir 9780071077606 , Gate 2025 Civil Engineering - Guide By Gkp C L Educate 9789356817593 , Gate 2025 Mechanical Engineering Guide Gkp 9789356817746 , Engineering Design Dieter 9789355322258 , Economics And Principles Of Management Vinoth Kumar 9788194244646 , Vector Mechanics For Engineers Dynamics Beer 9789353166656 , Aviation Maintenance Management Kinnison 9780071076838 , Theory Of Machines S S Rattan 9789353166281 , Turbomachinery Dubey 9789353161156 , Engineering Mechanics 4/E Kumar 9780070681811 , Modern Compressible Flow: With Historica Anderson 9789355320070 , Programming In Matlab Patel Mittal 9789332524811 , Finite Element Analysis Moaveni 9788131760642 , Non Conventional Energy Resources Sobh Nath Singh 9789332543577 , Additive Manufacturing And 3D Printing Technology Awari Thorat 9781041049562 , Practical Guide To Vehicle Refinishin Woodstock 9781032963570 , The Internet Of Mechanical Things The Iot Framework Sami Salama Hussen 9781041038573 , Energy Storage Systems And Components Alfred Rufer 9781041049470 , Metal Cutting Theory & Practice Stephenson 9780824758882 , Classical Mechanics Problems And Solutions Carolina C Llie 9781032983608 , Product Design Baxter 9781032967882 , Thermal Measurements & Inverse Tech Orlande 9781439845554 , The Induction Machines Design Handbook Boldea Bks331229 , Modeling And Control Of Engineering Systems Clarence W. De Silva 9781420076868 , Fundametals Of Production Planning And Control Chapman 9788131717394 , Applied Thermodynamics For Engineering Technologist 5Ed Eastop 9788177582383 , Classical Mechaincs Goldstein 9788131758915 , Introduction To Robotics Saha 9789355326461 , Thermodynamics-Basc And Applied Ganesan 9789353161279 , Ethics In Engineering 5/Ed Martin 9789355325075 , Digital Marketing Chaarlas 9788119243983 , Non Conventional Energy Resources Khan 9789352601882 , Supply Chain Logistics Management Bowersox 9789353162580 , Mechanical Metallurgy Appuraj Thiyagrajan Deiter 9781307834840 , Schaums Outline Of Continuum Mechanics Mase 9789389691283 , Schaums Outline Of Statics And Mechanics Of Materials Nash 9789389691399 , Maleev & Hartmans Machine Design 6Ed Grover 9788123926322 , Mass Transfer Theory And Applications Narayanan Bks440952 , Manual Of Fire Safety Prakash 9788123919904 , Gpropulsion Systems For Space Applications Satyanarayana 9789395038553 , Mechanics Of Materials Si Version 5Ed Philpot 9789354643293 , Introduction To Robotics 3/Ed Niku 9789357461306 , Advanced Mechanics Of Materials 6Ed Boresi 9788194726395 , Design And Analysis Of Experiments Douglas & Montgomery 9788126540501 , Machine Component Design Robert C.Juvinall 9788126559732 , Callisters Materials Science And Engineering, 2Nd Ed Balasubramaniam 9788126541607 , Process Dynamics And Control 4Ed Dale Seborg 9789354248429 , Engineering Optimization Theory And Practice 5Ed Rao 9789357461238 , Principles Of Modern Manufacturing Si Version Groover 9788126573059 , Convective Heat And Mass Transfer South Asian Edi Mostafa Ghiassiaan 9781107511811 , Continuum Mechanics Jog C S 9781108437141 , Singers Engineering Mechanics Statics & Dynamics ( Si Units ) 3Ed Vijay Kumar 9788178002194 , Analytical Mechanics Fowles 9788131501115 , Thermal Sciences Potter Scott 9788131529461 , Physical Metallurgy Principles Abbaschian 9788131520697 , Additive Manufacturing Technology Hari Prasad 9789353500481 , Computational Fluid Dynamics & Heat Ghosh Dastidar 9788131533079 , Internet Mrketing With Mt Zahay 9789355734570 , Mechanical Vibrations Theory And Applications Kelly 9788131526033 , Mechanics Of Materials, Enhanced Edi Goodno--Gere 9789355737847 , Fundamentals Of Mechatronics Jouane 9788131526026 , Mechanics Of Materials Strength Of Materials Pilli/Bala 9789386668509 , Workshop Manufacturing Practices Ai Juneja 9789387994614 , The Finite Elements Methods - Its Basis & Fundamentals 7/Ed Zienkiewiez 9789351071587 , Automation And Collaborative Robotics (Dp) Mathews 9781484277102 , The Robotic Process Automation Handbook : A Guide To Implementing Ri Systems Taulli 9781484275306 , Materials Selection In Mechanical Design 5Ed Ashby 9789351073864 , Industry 4.0 : The Industrial Internet Things Gilchrist 9781484249703 , The Finite Element Method A Practical Course 2Ed Liu 9789351071594 , Elasticity-Theory, Applications & Numerics 2Ed Sadd 9789351072270 , Energy Resources And Their Utilisation R.K. Khitoliya 9789394917040 , Workshop Theory And Practice Delilah Sam 9788119365098 , New Persp. In Hybrid Vehicle Technology Samual Rodrigues 9788119365418 , Natural Gas Engineering Selvin 9788119365197 , Machine Shop Theory Samual Rodrigues 9788119205639 , Applied Mechanics Laboratory Samual Lobo 9788119365760 , Robotics: Emerging Opportunities Adrian Dsilva 9788119523702 , Advances In Hypersonic Vehicles Samual Rodrigues 9788119365500 , Machine Elements Samual Rodrigues 9788119205691 , Work And Energy Parth Chavda 9788119365234 , Design Thinking : A Comprehensive Textbook Tiwari 9789357468640 , Welding Technology Sanfras Monteiro 9788119523023 , Combustion Engineering Samual Rodrigues 9788119205943 , Fluid Machinery Noel Vincent 9788119365029 , Renewable Energy Roy 9789384007157 , Engineering Graphics Using Autocad 7/Ed {Pb} Elanchezhian C 789387938564 , Introduction To Micromachining 2Ed Jain 9788184873610 , A Systems Approach To Automotive Technology Erjavac 9788131512111 , Emotionally Intelligent Design Pavliscak 9789352138029 , Mechanics Of Solids Binu Sivakumar 9789380381671 , Mechanics Of Solids Christian Johnson 9789385983085 , Jet Engines Jaganathan 9789380381497 , Essentials Of Management, 11Ed Koontz 9789353168148 , Disaster Management Subramanian Bks481407 , Engineering Fluid Mechanics Kumar Bks613447 , A Textbook Of Fluid Mechanics Rajput Bks648302 , A Textbook Of Thermal Engineering ( Lpspe ) Khurmi Bks613483 , Materials Science And Engineering Raghavan 9788120350922 , Engineering Economics 2Nd Ed Panneerselvam Bks661039 , A Tb Of Theory Of Machine Gupta R Khurmi Bks408347 , Energy Security And Sustainability Shukla A. 9781032728926 , Mechanical Engineering Jain Bks554131 , Engineering Materials And Metallurgy Annamalai 9789386235046 , Kinematics Of Machinery Baskar Bks462932 , Thermal Engineering Swaminathan Bks638475 , Engineering Materials And Metallurgy Baskar Bks638439 , Lean Manufacuring Kalyana Chakravarthy Bks638464 , Elements Of Mechanical Engineering Singh Bks448529 , Fundamentals Of Manifacturing Engineering Singh 9789380156002 , Strength Of Machine Elements Ghorpade 9789384726003 , Observability Engineering Achieving Production Excellence Majors 9789355422996 , Research Methodology 5Ed Kothari 9789389802559 , The Automotive Body Vol 2 Morello 9788132208884 , Kinematics Of Machines Kumar 9789388005425 , Essentials Of Heat And Fluid Flow In Porous Media Narasimhan 9789382127215 , Analysis Of Composite Structures Decolon 9789380931463 , Theory Of Elasticity Chandramouli 9789380381633 , Principles Of Composite Material Mechanics 3Ed Gibson Bks380369 , Introduction To Combustion Engineering Basic And Applied Amitava Sarkar 9789357053129 , Textbook Of Finite Element Analysis Seshu Bks414440 , Engineering Thermodynamics Savithiri Bks442773 , Automobile Engineering Vol-Ii Kirpal Singh 9788180142512 , An Introduction To Mechanical Engine 4Ed Wickert Lewis 9789353507473 , Welding Engineering & Technology Parmar Bks53191 , Manufacturing Technology Vol 1-Foundry Forming Rao 9789353160500 , Manufacturing Technology Singh 9789381162385 , Dynamics Of Machines Balaguru 9789386668608 , Unconventional Machining Vivekanandhan Bks613041 , Basic Civil And Mechanical Engineering Shanmugam 9789355329547 , Engineerin Drawing 2Ed Shah / Rana 9788131710562 , Materials For Engineers And Technicians 7Ed Bolton 9781032973722 , Fuel Cell Technology Handbook Hoogers Bks333321 , Robots And Robotics Miller 9789387572966 , Non Destructive Testing And Materials Vivekanandhan Bks476859 , Engineering Mechanics Nelson 9780070146143 , Engineering Tribology 4Ed Stachowiak 9789351071679 , Materials Selection In Mechanical Design 5Ed Ashby 9789351073864 , Automobile Engineering Ayyappan Karthikeyan Bks464418 , Thermal Engineering Swaminathan Bks638475 , Automobile Engineering Babu Singh Bks587323 , A Textbook Of Production Technology Sharma Bks479783 , A Textbook Of Mechatronics Rajput Bks554009 , Automobile Engineering Jain 9780070445291 , Engineering Mechanics Statics & Dynamics Khanchani 9788180521089 , Basic Mechanical Engineering Prabhu 9788183715737 , Powder Metallurgy Ramakrisnan 9789381714485 , Additive Manufacturing Technology Hari Prasad 9789353500481 , Switching And Finite Automata Theory Jha 9780521176804 , Introduction To Mechanics 2Nd Ed Mahendra K Verma 9788173719813 , Basic And Applied Thermodynamics - A Ready Recknor Bhat 9789388005074 , Basic Refrigeration And Airconditioning 4Ed Ananthanarayanan 9781259062704 , Engineering Mechanics Applied Mecha Gupta 9789353505240 , Mechatronics Sathish Kumar Bks476759 , Automobile Engineereing Vol I Singh Bks247106 , Process Planning And Cost Estimating Selvakumar Bks480422 , Non Conventional Energy Resources Sawhney 9788120346093 , Non Conventional Energy Resources Sobh Nath Singh 9789332543577 , Introduction To Micromachining 2Ed Jain 9788184873610 , Vector Mechanics For Engineers Statics/Dynamics (Sie) Beer 9789353166625 , Fluid Mechanics &Hydraulics Rev &Updated Edn Ukarande 9789381162538 , Mechanical Measurements - Revision 6Ed Beckwith 9789353945633 , Vibration Monitoring Testing And Instrumentation C W.De Silva 9781032292137 , A Treatise On Turbomachines Gopalakrishnan Bks321517 , Construction Materials Vs Karthikeyan Bks476834 , Design Of Machine Elements Bhandari 9789390177479 , Mechanical Vibrations Bhava 9788131732489 , Design Of Transmission Systems Baskar Bks476758 , Engineering Materials And Metallurgy Baskar Bks638439 , Manufacturing Technology Vivekanandhan Bks638476 , Design Of Machine Elements Arunraja Bks638441 , Mechanical Vibrations Nag 9788126530908 , Power Plant Engineering Dhanasekar Bks505300 , Statistical Quality Control A Modern Introduction 6Ed Montgomery 9788126525065 , Additive Manufacturing Technologies Shiva Ahuj Shukla 9789357462419 , Hydraulics And Pneumatics Dixon Bks638479 , Engineering Principles Of Ground Modification Hausman 9789351341871 , Engineering Thermodynamics 6Ed Nag 9789352606429 , Refrigeration And Air Conditioning Arora 9789390385843 , Enterprise Resource Planning 4Th Edn Leon 9789353167820 , Foundations Of Material Science And Engg 6Th Edn Smith 9789355322173 , Shigleys Mechanical Engineering Design Budynas 9789390219636 , General Studies Paper - I ( 2025 ) Mhe 9789355327796 , Erp Demystified 3/Ed Leon 9789383286676 , Heat And Mass Transfer 6Ed Cengel 9789390185283 , Engineering Noise Control: Theory And Practices 4Ed Bies 9780415487078 , Rapid Prototyping And Engineering Applications Frank W.Liou 9781138569577 , Strength Of Materials Vol Ii Binu Sukumar 9789388005418 , Mechatronics A Foundation Course Clarence W.De Silva 9781138569553 , Design And Analysis Of Randomized Algorithms Hromkovic 9788132231592 , Metrology And Measurements Annamalai 9789388005463 , Fluid Mechanics And Machinery Molykutty 9789391549725 , Micro Electro Mechanical System Design Allen 9780824758240 , Micromachining Of Engineering Materials J Mcgeough 9781032419794 , Gas Turbine Combustion-3 Rd Ed Lefebvre 9781138569584 , Ergonomics Laboratory Exercises Joseph Gallwey 9781032973005 , Introduction To Biofuels Mousdale 9781439812075 , Environmental Engineering Charles Monteiro 9788119205509 , Power Plant Engineering Lijo Thomas 9788119365036 , Industrial Engineering Richard Carvalho 9788119205523 , Design & Operation Of Heat Exchanger Gerhard Rott 9788119365425 , Hydro Power Gerhard Rott 9788119205912 , Air Conditioning And Ventilation Systems Lijo Thomas 9788119365401 , Materials Science And Engineering Raghavan 9788120350922 , Automation And Collaborative Robotics (Dp) Mathews 9781484277102 , Design Management : Create, Develop And Lead Effective Design Teams Picchi 9781484283615 , Heat And Mass Transfer 2Ed Karwa 9789811926099 , Testing Of Metallic Materials 2Ed Suryanarayana 9788178001340 , Introduction To Engineering Materials 2/Ed Murray George 9781032530772 , Mechanics Of Composite Materials 2/Ed Jones R.M 9781138571075 , Reliability Evaluation Of Enginnering Systems 2Ed Billinton 9788181285522 , Workshop Practice Manual 6/Ed Reddy 9788178003078 , Finite Element Analysis 2D Lakshmi Narasai 9789389354225 , Engineering Mechanics Pb Lakshmi 9789390211609 , Engineering Mechanics 2Ed Harbola 9788131518298 , Environmental Science And Engineering Rajesh Gopinath 9789387511569 , Materials Science And Engineering Periodical Renewal Gilmore 9788131520451 , Environmental Science With Mt 16 Th Ed Miller 9789355738899 , Fluid Mechanics Munson Huebsch 9788126553433 , Engineering Mechanics: Dynamics, Si Version Meriam Bolton 9788126565375 , Engineering Mechanics Statics And Dynamcs James Meriam Kraige 9789354248566 , Engineering Fluid Mechanics Elger 9788126564491 , Engineering Mechanics Applied Mecha Gupta 9789353505240 , Machine Design Data Book Ramana 9789387593879 , Heat Transfer Alan 9789332575066 , Theory Of Machines 3Ed Bevan 9788131729656 , Introduction To Enviromental Engineering And Science Masters 9789332549760 , Heat And Mass Transfer Mayilsamy 9788131733837 , Engineering Thermodynamics 4Ed Rogers 9788131702062 , Operations Research :An Introduction-10Th Ed Hamdy Taha 9789352865277 , Engineering Mechanics - Statics & Dynamics Shames Rao 9788177581232 , Automation, Production Systems, And Computer - Integrated Manufacturing 5Th Ed Groover 9789361592959 , Introduction To Materials Science For Engineers 9E/D Shackelford 9789357059978 , Fundamentals Of Engineering Drawing Luzadder 9789332549982 , Engineering Materials Properties And Selection 9Ed Budinski Naraimhulu 9789332574045 , Thermodynamics Rajadurai Bks471287 , Environmental Science And Engineering Kaushik 9788122436471 , Engineering Optimization 4Ed Rao 9789395161800 , Cad/Cam/Cim 5Ed Radhakrishnan 9789395161855 , Finite Element Analysis With Ansys Workbench Tickoo 9789355513007 , Industrial Waste Management Mathankumar Bks480053 , Metrology And Measurements Vivekanandan Bks638442 , Finite Elements Analysis Baskar Bks534307 , Environmental And Agriculture Kavitha Bks638465 , Energy Materials Bandarenka A.S 9781032530789 , Digital Twin Ranjan Ganguli 9781032934198 , Industry 5.0 The Future Of The Industrial Economy Uthayan 9781032600130 , Quantum Computation Helmut Bez 9781032983738 , Wind Electrical Systems Bhadra, 9780195670936 , Metal Fatigue In Engineering Stephens 9788126539215 , Introduction To Industrial Internet Of Things And Industry 40 Sudip Misra 9781032146751 , Sustainable Manufacturing For Industry 4.0 Jayakrishna K. 9781032728728 , Reverse Supply Chains: Issues And Analysis Gupta S.M. 9781032729039 , Industry 5.0 The Future Of The Industrial Economy Uthayan 9781032600130 , Gas Turbine Heat Transfer Cooling Je-Chin Han, Sandip Dutta 9781439855683 , First Course In Aerial Robots And Drones (A) Bestaoui Sebbane 9781032963518 , Handbook Of Induction Heating Rudnev 9780824708481 , Fracture Mechanics (Forth Ed) T.L Anderson 9781032292120 , Fire Safety Engg Design Of Structures, 2Ed Purkiss 9788131220085 , Future Energy Improved Sustainable And Clean Opitons Letcjer 9788131220849 , Introduction To Finite Elements In Engineering 5/E Tirupathi 9781009461818 , Fundamentals Of Gas Dynamics Babu 9781910390009 , Fundamentals Of Propulsion Babu 9788180522529 , Engineering Metrology 3Rd Ed Narayana Bks396066 , Engineering Mechanics Kumaravelan Bks315205 , General Aptitude For Competitive Examinations Pattanaik Bks670722 , Dictionary Of Heat Power Engineering Ramalingam 9789386923035 , Environmental Pollution Principles Narayana Bks353570 , Production Processes Luqman 9788123918983 , Tractors And Their Power Units, Hb Lijiedahal 9788123905013 , Metal Cutting Principles Shaw 9788123901367 , Sheet Metal Press Tools Design And Making A Practical Approach Luqman 9788123925134 , Solid State Physics Wahab 9788184877786 , Practical Non - Destructive Testing, 3Ed Baldev Raj 9788173197970 , Mechanics Of Machines, 3Ed Ramamurti 9788173198922 , Handbook On Quality And Productivity Improvement Of Concrete Nayak 9788184876390 , Environmental Studies 4Ed Rajagopalan 9789354978944 , Finite Element Methods Dhanraj 9780198073901 , Fluid Dynamics Raisinghania Bks320511 , Entrepreneurship 11/Ed Hisrich 9789390113309 , Thermodynamics 9Th Ed Cengel 9789353165741 , Cad / Cam : Computer - Aided Design & Manufacturing Groover 9788177584165 , Engineering Vibration, 4/E Inman 9789332518483 , Thermodynamics 9Th Ed Cengel 9789353165741 , Schaums Outline Of Mechanical Vibration Graham Kelly 9789389538861 , Enterprise Resource Planning Singla 9789360531485 , Machine Drawing 51Ed Bhatt 9789385039560 , Heat Treatment : Principles And Techniques 3Ed Rajan 9788119364077 , Total Quality Management 2Ed Mukerjee 9788119364299 , Heat Treatment : Principles And Techniques 3Ed Rajan 9788119364077 , Operations Research Panneerselvam 9789354437892 , Design Thinking Teun Den Dekker 9781032786018 , Aeroplane Ramalingam 9788193103159 , Faqs In Control Systems Engineering Pattanaik 9789394639003 , Mass Transfer - Theory & Practice Begum/Anantharaman 9788120341692 , Total Quality Management 5Ed Besterfield 9789353066314 , Production &Operations Management 3Ed Panneerselvam Bks477079 , Manufacturing Technology Vol 2-Metal Cutting Rao 9789353160524 , Engineering Drawing Agrawal 9789353167448 , Cad / Cam : Computer - Aided Design & Manufacturing Groover 9788177584165 , Engineering Mechanics : Statics & Dynamics Kottiswaran Bks307984 , Power Plant Engineering Hegde 9789332534100 , Hydraulics And Fluid Mechanics Hydraulic Machine Modi , Seth Bks291963 , Fundamentals Of Heat And Mass Transer Kothandaraman Bks481435 , Alternative Fuels For Ic Engines Krishnasamy 9789364441995 , Mechatronics Electronic Control Systems In Mechanical And Electrical Eng Bolton 9789357052849 , Manufacturing Technology Vol 2-Metal Cutting Rao 9789353160524 , Fundamentals Of Heat And Mass Transer Kothandaraman Bks481435 , Mechatronics Electronic Control Systems In Mechanical And Electrical Eng Bolton 9789357052849 , Production &Operations Management 3Ed Panneerselvam Bks477079 , Engineering Drawing Agrawal 9789353167448 , Mass Transfer - Theory & Practice Begum/Anantharaman 9788120341692 , Industrial Robotics Control Frigeni 9781484294154 , Gate 2025 Production And Industrial Eng Gkp 9789356818170 , Engineering Vibration, 4/E Inman 9789332518483 , Fundamentals Of Engg Heat And Mass Transfer-5Ed Sachdeva 9789386070968 , Internet Of Nanothings And Wireless Body Area Networks Fadi 9781032599144 , Modern Machining Processes Pandey 9789386761835 , Materials Science For Mechanical Engineering Palanisamy 9789386923059 , Materials Science For Mechanical Engineering Palanisamy 9789386923059 , Textbook Of Fluid Dynamics Chorlton 9788123908816 , Engineering Mechanics : Statics & Dynamics Kottiswaran Bks307984 , Robotics Rajmohan Bks480419 , Hmt Data Book Kothandaraman 9788812243594 , Design Data (Data Book) Psg Bks58578 , Digital Signal Processing 2Ed Paulo Diniz 9781108406703 , 8086 Microprocessor And Applications 3Ed Kani 9789354661327 , Wireless Telecommunication System & Network Mullett 9788131520123 , Operational Amplifiers & Linear Integrated Circuits Lal Kishore 9788177585667 , Mobile Computing Principles Bfar 9780521696234 , Microprocessors & Programmed Logic 2Ed Short 9788131709160 , Design With Pic Microcontroller Peatman 9788177585513 , Digital Systems Design With Access Code Nagoor Kani 9789354667688 , Introduction To Biomems Folch 9781032568225 , Introduction To Biomedical Equipment Technology 4Ed Carr 9788177588835 , Antennas & Wave Propagation Raju 9788131701843 , Raspberry Pi For Dummies Cook 9789357460422 , Digital Signal Processors : Architectures --Op Kuo 9788131717936 , Principles Of Electromagnetics, 6Ed Sadiku 9780199461851 , Advanced Digital Design With The Verilog Michael.D.Ciletti 9789332584464 , Neural Networks Kumar 9781259006166 , Embedded System 2Nd Ed Peckol 9789357463966 , Microprocessor And Peripherals Chowdhury Bks405737 , Networks & Systems Roy Choudhury 9789389802535 , Microcontroller Theory And Application With The Pic Rafiquzzaman 9788126548354 , Digital Signal Processing For Anna University Kani 9789354661006 , Digital Signal Processing 3Ed Kani 9789354661167 , Analog And Pulse Circuits Lakshmaiah D 9789389354201 , Electronic Devices And Circuits Orient 9789386235305 , Quantum Chemistry 7 Ed Levine 9789332558533 , Engineering Circuit Analysis 9/Ed Hayt 9789390185139 , Gate 2025 Electronics And Communication Eng.Guide Gkp 9789356819306 , Chip Design For Submicron Vlsi : Cmos Layout And Simulation Uyemura 9788131501955 , Microelectronics Neamen 9789354601637 , Neural Networks And Learning Machines Haykin 9789332570313 , Electronic Circuits : Fundamentals And Applications 5Ed Tooley 9781032726687 , A Course In Digital Signal Processing Pucca Bundh Porat 9788126534913 , Signals And System Apte 9781316615393 , Digital Design 6Ed Mano 9789353062019 , Principles Of Signal Processing And Liner System Lathi 9780198062288 , Fiber Optic Communications 5Ed Palais 9788131717912 , Circuits And Networks Sudhakar 9789339219604 , Introduction To Communication Systems Madhow 9781316608241 , Analog Communication Rao 9780070704800 , Arduino Based Embedded Systems Singh 9781032964058 , Next Generation Wireless Lans 2Nd Ed Perahia 9781107414617 , Arm Microprocessor System Tahir 9781138387539 , Digital Communication Mutagi Bks478677 , Advanced Microprocessors & Peripherals Bhurchandi 9781259006135 , Vlsi Design Chitra 9788183716598 , Television And Video Engineering Salai Thillai 9788183712194 , The Design Of Cmos Radio Frequency Integrated Circuits Lee 9780521613897 , Network Security : Private Communication In A Public World Charlie Kaufman 9788196874339 , Sensors And Transducers Patranabis 9788120321984 , Neuro Fuzzy And Soft Computing Jang Sun Mizutani 9789332549883 , Network Analysis Channa Venkatesh 9788131533215 , Circuits Carlson 9788131505861 , Op Amps And Linear Integrated Circuits : Concepts And Applications Fiore 9788131512340 , Mobile Computing Principles Bfar 9780521696234 , Instrumental Methods Of Analysis Willard 9788123909431 , Vlsi Circuits And Embedded Systems Hasan Babu 9781032906003 , Computer Organization And Embedded System-6 Th Ed Hamacher 9789339218317 , Network Analysis And Synthesis, 2Ed Singh 9789353166724 , Handbook Of Biomedical Instrumentations Khandpur 9789355328021 , Security And Privacy In Internet Of Things Lots Hu Fei 9781032707150 , Television & Video Engineering Veeralakshmi 9789380156699 , Power Quality Sankaran 9781138569249 , Introduction To Microcontroller Programming For Power Electronic Control Applications Rossi 9781032972183 , Communications System Laboratory Preetham Kumar 9781138603288 , Digital Signal Processing And Its Applications Senthil Kumar 9788195268726 , Multimedia Enabled Sensors In Iot Fadi 9781032599205 , Novel Wearable Antennas For Communication And Medical System Albert Sabban 9781041049579 , Internet Of Things Using Single Board Computers : Principles Of Iot And Python Programming Kanagachidam Baresan 9781484299258 , Handbook Of Optical Communication Networks Ilyas 9781498798037 , Communications System Laboratory Preetham Kumar 9781138603288 , Digital Watermarking And Steganography 2Nd Edition Shih 9781032972121 , Propagation Handbook For Wireless Communication System Design Crane 9780849308208 , The Internet Of Things In The Cloud Honbo Zhou 9781498770354 , Arduino Based Embedded Systems Singh 9781032964058 , 5G Mobile Communications Concepts And Technologies Saad Asif 9781032663159 , Electronic Devices 10Ed Robert Floyd 9789354493935 , Semiconductor Physics And Devices, 3Ed Sze 9789354243226 , Digital Fundamentals 11Ed Floyd 9789332584600 , Electronic Devices And Circuits--11 Ed Boylestad Nashelsky 9789332542600 , The 8051 Microcontrollers & Embedded Systems 2Ed Mazidi 9788131710265 , A System C Primer 2Ed Bhasker 9788178001418 , Household Electricity And Appliances P.B Bhagava 9789390211265 , Image Processing Analysis And Mach Sonka 9789386858146 , Verilog Hdl 2Ed +Cd Palnitkar 9788177589184 , Modern Semiconductor Devices For Integration Hu 9788131730249 , Analog Integrated Circuit Design Isv 2Nd Ed Chan Carusone 9788126543939 , Textbook Of Digital Electronics Vasudevan 9789381714539 , Microwave Engineering 4Ed Das 9789390113347 , Analysis Of Microcontrollers For The Students Kothari 9789381714294 , Digital Signal Processing : For C.S.I.T Palani 9789380618388 , Fundamentals Of Digital Images Processing Jain 9789332551916 , Signals And Systems Sreenivasa Reddy 9789389354041 , Satellite Communications Pratt 9789354243035 , Analog Signals And Systems Kudeki 9788131787984 , Embedded Systems Handbook 2Ed System Design And Verification Zurawski Bks331222 , Vlsi Design And Eda Tools 2Nd Ed Sarkar 9788183714976 , Vlsi Design Das 9780198094869 , 8085 Microprocessor Pramod Borole 9789382127581 , Fundamentals Of Communication Systems Proakis 9788131705735 , Short Range Wireless Communication 3Ed Bensky 9789351073994 , Introduction To Fiber Optics Ghatak Ajoy 9781316644010 , The Definitive Guide To Arm Cortex M3 And Cortex M4 Processors Yiu 9789351071754 , Rf Circuit Design Ludwig 9788131762189 , Electric Circuits For Be/Betch 2Ed Kani 9789354663925 , Control Systems Nagoor Kani 9789389239010 , Digital Logic Circuits Nagoor Kani 9789354669989 , Microwave And Rf Design Steer 9789380381305 , Electrical Measurement And Measuring Instruments Rajput Bks543993 , Digital Signal Processing 3Ed Kani 9789354661167 , A Handson Course In Sensors Using The Arduino And Raspberry Pi Ziemann Volker 9781032791470 , Signal And Systems Simplified 2Ed Nagoor Kani 9789354661013 , Basic Electrical And Electronics Engineering 2/Ed Bhattacharya 9789332586505 , Ad Hoc Wireless Networks : Architectures & Protocols Murthy 9788131706886 , Ad Hoc And Wilreless Sensor Network Athawale 9789356066137 , Digital Circuits Design Kothari 9789332543539 , Solid State Electronic Devices Streetman 9789332555082 , Wireless Communication Goldsmith 9780521704168 , Probability And Stochastic Processes 3Ed Yates 9789354243455 , Signals, Systems And Inference Oppenheim 9789356064676 , Electromagnetic Field And Waves Salivahanan 9788119896677 , Analog Design For Cmos Vlsi Systems Maloberti 9788181284341 , Vlsi Design Michael 9780849318764 , Cognitive Sensors And Iot Fadi 9781032599236 , Digital Design & Computer Organization Farhat 9780849311918 , Digital Intergrated Circuits Evegni 9780849330575 , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi Ambaji Kulkarni 9781032966885 , Basic Electrical And Electronics Engineering Murugan 9789384726072 , Adaptive Antenna Arrays Chandran 9788181289322 , Networks Lines & Fields 2Ed Ryder 9789332559516 , Data Compression : The Complete Reference Salomon 9788184898002 , Electric Circuits Bell Bks321194 , Digital Signal Processing Oppenheim 9789332550339 , Iot Standards With Blockchain : Enterprise Methodology For Internet Of Things Upadrista 9781484284278 , An In Depth Guide To Mobile Device Forensics Chuck Easttom 9781032785905 , Digital Signal Processing Oppenheim 9789332550339 , Digital Modulation & Coding Wilson 9788131721438 , Fundamentals Of Mobile Computing 2Ed Pattnaik Bks534717 , Introduction To Iot With Machine Learning And Image Processing Using Raspberry Pi Ambaji Kulkarni 9781032966885 , Biomedical Instrumentations And Measurements Cromwell 9789332556911 , Artificial Neural Networks For Engineers And Scientists Chakraverty S. 9781032729121 , Digital Communication Bhattacharya 9780070591172 , Signals And Systems 2/Ed Oppenheim 9789332550230 , Fundamentals Of Modern Vlsi Devices Yuan Taur 9781316649794 , Digital Systems:Principles&Design(Anna) Rajkamal 9789332535916 , Principles Of Cognitive Radio Vincent 9781107439900 , Digital Signal Processing 4Ed Proakis 9788131710005 , Op Amps And Linear Integrated Circuits Gayakwad 9789353949037 , Microwave And Radar Engineering Rao 9788131799444 , Introduction To Pspice Using Orcad For Circuits And Electronics Rashid 9789332555174 , Basic Electronics Saha 9781316632932 , Linear Integrated Circuits Salivahanan 9789353163808 , Principles Of Electronic Communication Orient 9789386235107 , Optoelectronic Devices And Optical Fiber Communication Chakrabarti 9789354667947 , Introduction To Vlsi Design Flow Sneh Saurabh 9781009200813 , Antennas And Wave Propagation Kraus 9789352606184 , Network Analysis Revised 3Ed Van Valkenburg/ Rathode 9789353433123 , Communication Systems : Analog And Digital, 3Rd Singh 9781259004605 , Internet Of Things The : How Smart Tvs Sm Miller 9789332552456 , Microwave Devices & Circuits 3Ed Liao 9788177583533 , Fundamentals Of Mobile Computing 2Ed Pattnaik Bks534717 , 5G Mobile And Wireless Communication Technology Pauline Cullen 9781009590921 , The Intel Microprocessors : 8086/8088,80186/80188,80286,80386,80486,Pentium, Pentium Pro Processor, Pentium Ii - 8Ed Brey 9788131726228 , Circuits Analysis Theory And Practic Robbins 9788131519028 , Medical Instrumentation 5Ed : Application And Design : An Indian Adaptation Webster 9789354249150 , Microwave Engineering, An Indian Adaptation Theory And Techniques Pozar 9789388991087 , Wireless Communications 2Ed Molisch 9789354248795 , Controll System Eng. 8/Ed Norman 9789357463980 , Signals, Systems, And Transforms, 4/E Phillips 9789332518490 , Antenna Theory And Applications 4Ed Balanis 9789354248474 , Gate 2025 Electronics And Communication Eng.Guide Gkp 9789356819306 , Introduction To Analog And Digital Communication 2Ed Haykin 9789354644337 , Digital Image Processing Gonzalez 9789353062989 , Power Electronics (An Indian Adaption) Ned Mohan 9789354640278 , Dorfs Introduction To Electric Circuits Wiley India Edition Richard 9788126573493 , Electronic Devices 10Ed Robert Floyd 9789354493935 , Communication Systems 5Ed Haykin 9789354640896 , Modern Control Engineering Ogata 9789332550162 , Electric Circuits With Mt Kang 9789386650344 , The Intel Microprocessors : 8086/8088,80186/80188,80286,80386,80486,Pentium, Pentium Pro Processor, Pentium Ii - 8Ed Brey 9788131726228 , Modern Digital Electronics-5Th Edtion Jain 9789355321770 , Analog And Digital Electronics Roth 9789353502355 , Introduction To Communication Systems Madhow 9781316608241 , Voip Handbook Application Technologies Ahson 9781420070200 , Embedded Systems Handbook 2Ed Network Embedded System Zurawski Bks331227 , Matlab: An Introduction With Applications 6Ed Amos Gilat 9789357462174 , Fiber Optic Communication Systems 5Ed Agrawal 9789357461245 , Crc Handbook Of Modern Telecommunications 2Ed Morreale Bks331221 , Mathematical Aspects Of Signal Processing Sircar 9781107175174 , Rf And Microwave Semiconductior Device Handbook Golio 9780849315626 , Electronic Systems Maintenance Handbook, Second Edi Whitaker Bks322864 , The 8051 Microcontroller Ayala 9788131502006 , Digital Systems Design Using Vhdl W/ Roth 9788131518304 , Fundamentals Of Engineering Electromagnetics Cheng 9789332535138 , Basic Electronics-2Ed Kothari 9789352606467 , Power Electronics Essentials & Applications Umanand 9788126519453 , An In Depth Guide To Mobile Device Forensics Chuck Easttom 9781032785905 , Automotive Embedded Systems Handbook Navet Bks335190 , Wavelet Analysis With Applications To Image Process Prasad 9780849331695 , Primer On Wavelets And Their Scintific Applications Walker 9781032963617 , Face Detectin And Recognition: Theory And Practice Datta A.K. 9781032728964 , Fiber Optics & Optoelectronics Khare 9780195669305 , Mobile Cellular Telecomm 2E Lee 9780070635999 , Cmos Vlsi Design : A Circuits And Systems Perspective, 3Ed Weste 9788131762653 , Antennas Blake 9789380381268 , Mobile Communications, 2Ed Schiller 9788131724262 , Introduction To Wireless Systems Black 9788131726389 , Ad Hoc And Wilreless Sensor Network Athawale 9789356066137 , Linear Integrated Circuits Sathishkumar Bks476847 , Linear Integrated Circuits Dhanasekar Bks638493 , Embedded And Real Time Systems Ramprabu Bks476848 , Transmission Lines And Rf Systems Shanmugaraja Sivakumar Bks490771 , Transmission And Distribution Gayathri Bks476751 , Wireless Communication Santhosh Krishna Bks638491 , Digital System Design Edwindhas Bks638462 , Power Quality & Distributed Generation Jayaprakash 9788184876987 , Digital Signal Processing Antoniou 9780070636330 , Power System Engineering 3 Ed Kothari 9789353165116 , Digital Integrated Circuit 2/Ed Rabeay 9789332573925 , Principles Of Electronic Materials Kasap 9789390113866 , Digital Logic Circuits With Vhdl And Verilog Programs Nagoor Kani 9789354669606 , Principles Of Electronic Materials Kasap 9789390113866 , Wireless Communications : Principles Rappaport 9789356066212 , Communication Networks Fundamentals Leon 9780070595019 , Interoperability In Iot For Smart Systems Roy M. 9781032728100 , Basic Elec & Linear Circuits Bhargava 9781259006463 , Brain Computer Interface Eeg Signal Processing Panigrahi 9781032851181 , Learning Basics And Electronic Science Through Mcqs Priya 9789394639249 , Fundamentals Of Logic Design Roth 9789360535650 , Engineering Circuit Analysis 10E/D Hayt 9789364441094 , Programmable Logic Controllers 6Th Ed Petruzella 9789355325860 , Modern Wireless Communication Haykin 9788131704431 , Signals And Systems 5Ed Ramesh Babu Bks505218 , Digital Signal Processing Ramesh Babu Bks503977 , Digital Image Processing 2Ed Sridhar Bks643706 , Digital Logic Circuits With Vhdl And Verilog Programs Nagoor Kani 9789354669606 , Wireless Communications : Principles Rappaport 9789356066212 , Digital Integrated Circuit 2/Ed Rabeay 9789332573925 , Brain Computer Interface Eeg Signal Processing Panigrahi 9781032851181 , Internet Of Nanothings And Wireless Body Area Networks Fadi 9781032599144 , Phyiscs For Electronics & Information Science Palanisamy 9789386923134 , Vlsi Design Sathyah Bks665018 , Basic Elec & Linear Circuits Bhargava 9781259006463 , Communication Networks Fundamentals Leon 9780070595019 , Linear Integrated Circuits Salivahanan 9789353160487 , Wireless Communications : Principles Rappaport 9789356066212 , Linear Integrated Circuits Salivahanan 9789353160487 , Digital Logic & Computer Design Mano 9789332542525 , Digital Electronics Bignell 9788131520710 , Design Of Analog Cmos Integrated Circuit-2Ed Razavi 9789387067844 , Fundamentals Of Logic Design Roth 9789360535650 , Engineering Circuit Analysis 10E/D Hayt 9789364441094 , Digital Electronics Bignell 9788131520710 , Design Of Analog Cmos Integrated Circuit-2Ed Razavi 9789387067844 , Applied Machine Learning Gopal 9789354601590 , Essentials Of Digital Signal Process Using Matlab Ingle/Proakis 9788131517727 , Arm System On Chip Architecture Furber 9789332555570 , Smart Grid In Iot Enabled Spaces Fadi Ai Turjman 9781032598543 , Power Plant Engineering Nag 9789354600050 , Mathematical Analysis A Straightforward Binmore 9781107526235 , Algebra 2Nd Edition Michael Artin 9789353432751 , Discrete Mathematics Dhami 9780199452798 , Statistics And Numerical Methods 10Ed Vijayakumari 9789356062733 , Algebra, 3Ed Sahai 9788173198250 , Algebraic Topology M J Greenberg , J R Harper 9780367475604 , Algebra, 4Ed Sahai 9788184876208 , Concept Of Modern Algebra Pandey 9788184877069 , Friendly Introduction To Number Theory Silverman 9789353433079 , Elementary Differential Equations 8Ed Richard 9789332571617 , Introduction To Graph Theory West 9789332549654 , Linear Algebra Ubaidullah 9789391549893 , Higher Algebra Barnard 9789385923326 , Sequences And Series Arumugam 9789388005128 , Modern Analysis Arumugam 9789388005111 , Intorduction Topology And Modern Analysis Simmons 9789387465916 , Higher Algebra Hall Knight 9788174731043 , Analytical Geometry Veerarajan 9789388005142 , Transforms And Partial Diffrential Equations 3Rd Ed Muthucumaraswamy 9789391549473 , Multilevel Analysis: Techniques And Applications 3/E Hox 9781032938035 , Thomas Calculus 15Ed Hass 9788119896608 , Calculus Vil I 2Ed ( An Indian Adaptation) Apostol 9789354642630 , Calculus 10Ed Saturmino Salas Einar Hille Ga 9789390421961 , Introduction To Linear Regresion Analysis, 6Ed Montgomery 9789357461283 , Matrices Advanced Calculus & Complex Stewart 9789360534509 , Operations Research Mote 9788126556380 , Topology 2Ed James Munkres 9789353432775 , Linear Algebra 5Ed Friedberg 9789390168132 , Multivariate Calculus Joshi Bks498996 , Mathematical Analysis 6Ed Malik Bks413195 , Stochastic Processes 5Ed Medhi 9789389802245 , Human Resource Management Aswathappa 9789355323675 , The Elements Of Complex Analysis 3Ed Choudhary 9789388818780 , Probability And Statistics For Engineering Devore 9789353506247 , Operations Research Panneerselvam 9789354437892 , The Elements Of Complex Analysis 3Ed Choudhary 9789388818780 , Optics 8Ed Ghatak 9789355328595 , Outline Of Beginning Physics Schaum 9789389538984 , Outline Of Astronomy Schaum 9789389538939 , Introductory Nuclear Physics 3/Ed Krane 9789354640834 , Physics Vol 2 5Ed David Halliday Resnick 9789354640438 , Physics For Scientists And Engineers Serway 9789355739223 , Non Conventional Energy Source Math 9789388005081 , Nuclear Physics Theory And Experiments 3Ed Roy 9788122449884 , Gravitation : Foundations And Frontiers (South Asian Edition) Padmanabhan 9780521178761 , Electricity And Magnetism Murugeshan 9789352837342 , Introductory Nuclear Physics Wong 9788126546060 , Modern Physics Murugeshan Bks367126 , Introduction To Electrodynamics South Asia Ed - 4/Ed David J. Griffiths 9781108822909 , Theoretical Astrophysics Vol 2 Padmanabhan 9781107400603 , Heat Thermodynamics And Statistical Physics Lal Subramanian Bks460942 , Classical Dynamic Of Particles Thornton 9788131518472 , Materials For Engineers And Technicians 7Ed Bolton 9781032973722 , Statistical Mechanics 2Ed (An Indian Adaption) Kerson Huang 9789354247736 , Atomic And Molecular Spectroscopy Rita Kakkar 9781108413206 , Laser Fundamentals Silfvast 9780521138475 , Engineering Chemistry 2E : Fundamentals And Applications Shikha Agarwal 9781108724449 , Organic Name Reations Sanjay Bari 9789389354737 , Basics Of Environmental Science Khosla 9788184874013 , Environmental Chemistry Singhu 9788122427318 , Biomaterials Principles And Applications Joon Park 9781032934167 , Organic Reaction Mechanisms Ahluwalia Bks366263 , Organic Synthesis Concepts And Methods 3Ed Pb 2014 Jurgen Hinri 9788126547227 , Engineering Chemistry Palanna 9789352605774 , Engineering Chemistry 2Nd Ed Wiley 9788126543205 , A Textbook Of Engineering Chemistry Dara Bks561640 , Engineering Chemistry Vairam & Kalyani 9788126543342 , Chemical Applications Of Group Theory Albert Cotton 9788194726364 , Environmental Science And Engineering Yuganath 9788183717014 , Environmental Science Isv 8Th/Ed Botkin, Killer 9788126534142 , Chemical Reaction Engineering 3Ed (An Indian Adaptation) Octave Levenspiel 9789354244605 , Outline Of Thermodynamics Schaum 9789389538540 , Textbook Of Chemical Engineering Thermodynamics Narayanan 9788120347472 , Communication Skills, 3Ed Sanjay Kumar 9789354978555 , English For Science & Technology-I Chellammal 9781009224796 , English For Science & Technology-Ii Francis 9781009251181 , Effective Technical Communication Rizvi 9789352605781 , Research Methodology Vinod 9789352863518 , Placement Interviews Skills For Success Anandamurugan 9780070700956 , Prowess Orient 9789354421242 , Research Methodology Panneerselvam 9788120349469 , Academic Writing A Handbook For Students Stephen Bailey 9781138615533 , Design Thinking In Technical Communication Jason C K Tham 9781041004356 , Principles Of Scientific And Technical Mohapatra 9789355327482 , Critical Thinking Idea Innovation And Creativity Richard H Mccuen 9781041000846 , Literature For Language Skills 2Ed Mahanand 9789388005470 , Academic Writing P.B Ajay Semalty 9789390211739 , Teaching English Through Folktales Mahanand 9789391549077 , An Introduction To Literary Studies Mario Klarer 9781032785974 , Heritage Of Tamils Muthuramalingam 9789391549718 , A Short History Of English Literature Saintsbury 9788174733054 , The English Language Wrenn 9788174733368 , An Introduction To The Study Of English Litetrature Hudson 9788174731197 , Rabindranath Tagores Ideational Challenges Bidyut Chakrabarty 9789356400122 , English Literature Long Bks476291 , Test Of Reasoning 7Th Edn Thorpe 9789389811513 , Science And Technology 8Ed Agarahri Ravi 9789355326324 , Excel Reasoning Arun Sharma 9789355329455 , Aptipedia Aptitude Encyclopedia 2 Ed Wiley 9788126569502 , Excel Quantitative Apititude Arun Sharma 9789355327970 , Verbal Ability And Reasoning For Competitive Examinations Anand Lalit Singh 9788126554294 , Intermediate Engligh Grammer With Answers, 2Ed Murphy 9788185618517 , Design Thinking Teun Den Dekker 9781032786018 , Spotting Errors Lakshminarayanan Bks670723
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Tamil Nadu View Result →
3.
Housing Urban and Rular Development #11173272 Technical Bid
Tender for Granular Sub-Base With Close Graded Material (Table:- 400-1) Plant Mix Method Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means With A Lead Of 1 Km. For Grading-Ii Material , Dry Lean Cement Concrete Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Fully Automatic Computerised Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing. , Cement Concrete Pavement Construction Of Un-Reinforced , Plain Cement Concrete Pavement M30 (Grade), Thickness As Per Design, Over A Prepared Sub Base, With 43/53 Grade Cement As Per Clause 602, Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 31.5 Mm, Mixed In Fully Automatic Computerised Batching Plant Compatiable With Printer And Pen Drive And Transported To Site In Transit Mixer For Having Continuous Agitated Mixer, Manufactured As Per Approved Mix Design Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , With All Lead And Lift Including Cost Of Admixtures In Recommended Portion As Per Is 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer In Charge Laid With A Fixed Form Paver (Laying And Fixing Of 150 Micron Thick Polythene Film And Finished In Continuous Operation Including Provision Of construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days Using Water Finishing To Lines And Grade As Per Drawing And Morth Specification Clause 602 With All Required Equipments (Dowel Bars & Tie Bar Will Be Paid Seprately). , Wet Mix Macadam Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mixer (Pug Mill), Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers In Sub-Base/Base Course On A Well Prepared Sub-Base And Compacting With Smooth Wheel Roller Of 80 To 100Kn Weight To Achieve The Desired Density Including Lighting, Barricading And Maintenance Of Diversion, Etc As Per Tables 400-12 & 400-13 And Morth Specification Clause 406 By Mechanical Means With A Lead Of 1 Km. , Prime Coat Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base(Wbm/Wmm) Using Truck Mounted Sprayer Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70-1.0 Kg/Sqm Using Mechanical Means As Per Morth Specification Clause 502 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Providing And Laying Bituminous Concrete With 100-120 Tph Batch Type Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Minimum @ 5.2 & 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specifications Clause 507 Complete In All Respects For Grading-Ii(13 Mm Nominal Size) Bitumen (Vg-30) , Dismantling Of Cement Concrete Pavements As Per Morth Specification Clause 202. Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately , Excavation For Structures Earthwork In Excavation For Structures As Per Drawing And Morth Specifications Clause 304.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 plain cement concrete Grade M 10 Nominal Mix 1:3:6 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 Reinforced Cement Concrete Grade M 20 , Supplying, Fitting, And Placing Hysd Bar Reinforcement (Primary Steel) In Foundation, Substructure And Superstructure At Any Level Complete As Per Drawing And Morth Specifications Clauses 1009,1600 And 2302 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 20 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 25 , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Morth Specification Clauses 1409, 2204.4, 2206.4 & 2706 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Morth Specifications Clauses 1700, 2302 And 2304 Reinforced Cement Concrete Grade M 30 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 Nominal Mix , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Filler Joint Providing And Fillling Joint Sealing Compound As Per Drawings And Morth Specifications With Coarse Sand And 6 Per Cent Bitumen By Weight Clause 2604 , Filler Joint Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Morth Specifications Clause 2604 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Morth Specification Clause 2204.6 & 2504.2.2 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Morth Specification Clause 304.3.7 & 2204.6 Granular Material , Construction Of Reinforced Cement Concrete Railing Of M 25 Grade In Cast-In-Situ With 20 Mm Nominal Size Aggregate, True To Line And Grade, Tolerance Of Vertical Railing Post Not To Exceed 1 In 500, Centre-To-Centre Spacing Between Vertical Posts Not To Exceed 2000 Mm As Per Drawing And Morth Specifications Clauses 1700, 1500 And 2703.3 , Providing And Laying Reinforced Cement Concrete Pipe Np3 As Per Design In Single Row Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2905. 1000 Mm Dia , Providing And Erecting Typical Citizens Information Board As Per Approved Drawing & Specification Made Of Two Ms Sheet Of 1.6 Mm Thick Each Of Size 900Mm X 750Mm Stiffend By Angle Iron 25Mmx25mm X 3Mm All Around The Plate & Plates Fixed On Frame Of 75Mm Dia Pipe Of 12 Swg Sheet (Vertical Post 3050 Mm With Angle Holdfasts And Horizontal Member 900Mm) To Be Joined By Embedded In Cement Concrete M-15 Grade Of Block Of 600Mmx 600Mm X 750 Mm Size Below Ground Level As Per Enclosed Drawings & As Directed By Engineering Incharge. All Ms Will Be Stove Anmeled On Both Side Lettering. Figuring And Border Will Be With Ready Mixed Synthethic Enamel Paint Of Superior Quality In Required Shade And Colour Etc Complete In All Respect. All Sections Of Framed Post And Steel Tube Will Be Painted With Primer And Two Coat Of Epoxy Paint As Per Drawing And As Per Specification.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
4.
Housing Urban and Rular Development #11173271 Technical Bid
Tender for Granular Sub-Base With Close Graded Material (Table:- 400-1) Plant Mix Method Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means With A Lead Of 1 Km. For Grading-Ii Material , Dry Lean Cement Concrete Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Fully Automatic Computerised Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing. , Cement Concrete Pavement Construction Of Un-Reinforced , Plain Cement Concrete Pavement M30 (Grade), Thickness As Per Design, Over A Prepared Sub Base, With 43/53 Grade Cement As Per Clause 602, Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 31.5 Mm, Mixed In Fully Automatic Computerised Batching Plant Compatiable With Printer And Pen Drive And Transported To Site In Transit Mixer For Having Continuous Agitated Mixer, Manufactured As Per Approved Mix Design Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , With All Lead And Lift Including Cost Of Admixtures In Recommended Portion As Per Is 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer In Charge Laid With A Fixed Form Paver (Laying And Fixing Of 150 Micron Thick Polythene Film And Finished In Continuous Operation Including Provision Of construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days Using Water Finishing To Lines And Grade As Per Drawing And Morth Specification Clause 602 With All Required Equipments (Dowel Bars & Tie Bar Will Be Paid Seprately). , Wet Mix Macadam Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mixer (Pug Mill), Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers In Sub-Base/Base Course On A Well Prepared Sub-Base And Compacting With Smooth Wheel Roller Of 80 To 100Kn Weight To Achieve The Desired Density Including Lighting, Barricading And Maintenance Of Diversion, Etc As Per Tables 400-12 & 400-13 And Morth Specification Clause 406 By Mechanical Means With A Lead Of 1 Km. , Prime Coat Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base(Wbm/Wmm) Using Truck Mounted Sprayer Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70-1.0 Kg/Sqm Using Mechanical Means As Per Morth Specification Clause 502 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Providing And Laying Bituminous Concrete With 100-120 Tph Batch Type Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Minimum @ 5.2 & 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specifications Clause 507 Complete In All Respects For Grading-Ii(13 Mm Nominal Size) Bitumen (Vg-30) , Dismantling Of Cement Concrete Pavements As Per Morth Specification Clause 202. Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately , Excavation For Structures Earthwork In Excavation For Structures As Per Drawing And Morth Specifications Clause 304.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 plain cement concrete Grade M 10 Nominal Mix 1:3:6 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 Reinforced Cement Concrete Grade M 20 , Supplying, Fitting, And Placing Hysd Bar Reinforcement (Primary Steel) In Foundation, Substructure And Superstructure At Any Level Complete As Per Drawing And Morth Specifications Clauses 1009,1600 And 2302 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 20 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 25 , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Morth Specification Clauses 1409, 2204.4, 2206.4 & 2706 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Morth Specifications Clauses 1700, 2302 And 2304 Reinforced Cement Concrete Grade M 30 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 Nominal Mix , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Filler Joint Providing And Fillling Joint Sealing Compound As Per Drawings And Morth Specifications With Coarse Sand And 6 Per Cent Bitumen By Weight Clause 2604 , Filler Joint Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Morth Specifications Clause 2604 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Morth Specification Clause 2204.6 & 2504.2.2 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Morth Specification Clause 304.3.7 & 2204.6 Granular Material , Construction Of Reinforced Cement Concrete Railing Of M 25 Grade In Cast-In-Situ With 20 Mm Nominal Size Aggregate, True To Line And Grade, Tolerance Of Vertical Railing Post Not To Exceed 1 In 500, Centre-To-Centre Spacing Between Vertical Posts Not To Exceed 2000 Mm As Per Drawing And Morth Specifications Clauses 1700, 1500 And 2703.3 , Providing And Laying Reinforced Cement Concrete Pipe Np3 As Per Design In Single Row Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2905. 1000 Mm Dia , Providing And Erecting Typical Citizens Information Board As Per Approved Drawing & Specification Made Of Two Ms Sheet Of 1.6 Mm Thick Each Of Size 900Mm X 750Mm Stiffend By Angle Iron 25Mmx25mm X 3Mm All Around The Plate & Plates Fixed On Frame Of 75Mm Dia Pipe Of 12 Swg Sheet (Vertical Post 3050 Mm With Angle Holdfasts And Horizontal Member 900Mm) To Be Joined By Embedded In Cement Concrete M-15 Grade Of Block Of 600Mmx 600Mm X 750 Mm Size Below Ground Level As Per Enclosed Drawings & As Directed By Engineering Incharge. All Ms Will Be Stove Anmeled On Both Side Lettering. Figuring And Border Will Be With Ready Mixed Synthethic Enamel Paint Of Superior Quality In Required Shade And Colour Etc Complete In All Respect. All Sections Of Framed Post And Steel Tube Will Be Painted With Primer And Two Coat Of Epoxy Paint As Per Drawing And As Per Specification.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
5.
Housing Urban and Rular Development #11173270 Technical Bid
Tender for Granular Sub-Base With Close Graded Material (Table:- 400-1) Plant Mix Method Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means With A Lead Of 1 Km. For Grading-Ii Material , Dry Lean Cement Concrete Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Fully Automatic Computerised Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing. , Cement Concrete Pavement Construction Of Un-Reinforced , Plain Cement Concrete Pavement M30 (Grade), Thickness As Per Design, Over A Prepared Sub Base, With 43/53 Grade Cement As Per Clause 602, Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 31.5 Mm, Mixed In Fully Automatic Computerised Batching Plant Compatiable With Printer And Pen Drive And Transported To Site In Transit Mixer For Having Continuous Agitated Mixer, Manufactured As Per Approved Mix Design Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , With All Lead And Lift Including Cost Of Admixtures In Recommended Portion As Per Is 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer In Charge Laid With A Fixed Form Paver (Laying And Fixing Of 150 Micron Thick Polythene Film And Finished In Continuous Operation Including Provision Of construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days Using Water Finishing To Lines And Grade As Per Drawing And Morth Specification Clause 602 With All Required Equipments (Dowel Bars & Tie Bar Will Be Paid Seprately). , Wet Mix Macadam Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mixer (Pug Mill), Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers In Sub-Base/Base Course On A Well Prepared Sub-Base And Compacting With Smooth Wheel Roller Of 80 To 100Kn Weight To Achieve The Desired Density Including Lighting, Barricading And Maintenance Of Diversion, Etc As Per Tables 400-12 & 400-13 And Morth Specification Clause 406 By Mechanical Means With A Lead Of 1 Km. , Prime Coat Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base(Wbm/Wmm) Using Truck Mounted Sprayer Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70-1.0 Kg/Sqm Using Mechanical Means As Per Morth Specification Clause 502 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Providing And Laying Bituminous Concrete With 100-120 Tph Batch Type Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Minimum @ 5.2 & 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specifications Clause 507 Complete In All Respects For Grading-Ii(13 Mm Nominal Size) Bitumen (Vg-30) , Dismantling Of Cement Concrete Pavements As Per Morth Specification Clause 202. Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately , Excavation For Structures Earthwork In Excavation For Structures As Per Drawing And Morth Specifications Clause 304.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 plain cement concrete Grade M 10 Nominal Mix 1:3:6 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 Reinforced Cement Concrete Grade M 20 , Supplying, Fitting, And Placing Hysd Bar Reinforcement (Primary Steel) In Foundation, Substructure And Superstructure At Any Level Complete As Per Drawing And Morth Specifications Clauses 1009,1600 And 2302 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 20 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 25 , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Morth Specification Clauses 1409, 2204.4, 2206.4 & 2706 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Morth Specifications Clauses 1700, 2302 And 2304 Reinforced Cement Concrete Grade M 30 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 Nominal Mix , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Filler Joint Providing And Fillling Joint Sealing Compound As Per Drawings And Morth Specifications With Coarse Sand And 6 Per Cent Bitumen By Weight Clause 2604 , Filler Joint Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Morth Specifications Clause 2604 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Morth Specification Clause 2204.6 & 2504.2.2 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Morth Specification Clause 304.3.7 & 2204.6 Granular Material , Construction Of Reinforced Cement Concrete Railing Of M 25 Grade In Cast-In-Situ With 20 Mm Nominal Size Aggregate, True To Line And Grade, Tolerance Of Vertical Railing Post Not To Exceed 1 In 500, Centre-To-Centre Spacing Between Vertical Posts Not To Exceed 2000 Mm As Per Drawing And Morth Specifications Clauses 1700, 1500 And 2703.3 , Providing And Laying Reinforced Cement Concrete Pipe Np3 As Per Design In Single Row Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2905. 1000 Mm Dia , Providing And Erecting Typical Citizens Information Board As Per Approved Drawing & Specification Made Of Two Ms Sheet Of 1.6 Mm Thick Each Of Size 900Mm X 750Mm Stiffend By Angle Iron 25Mmx25mm X 3Mm All Around The Plate & Plates Fixed On Frame Of 75Mm Dia Pipe Of 12 Swg Sheet (Vertical Post 3050 Mm With Angle Holdfasts And Horizontal Member 900Mm) To Be Joined By Embedded In Cement Concrete M-15 Grade Of Block Of 600Mmx 600Mm X 750 Mm Size Below Ground Level As Per Enclosed Drawings & As Directed By Engineering Incharge. All Ms Will Be Stove Anmeled On Both Side Lettering. Figuring And Border Will Be With Ready Mixed Synthethic Enamel Paint Of Superior Quality In Required Shade And Colour Etc Complete In All Respect. All Sections Of Framed Post And Steel Tube Will Be Painted With Primer And Two Coat Of Epoxy Paint As Per Drawing And As Per Specification.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
6.
Housing Urban and Rular Development #11173269 Technical Bid
Tender for Granular Sub-Base With Close Graded Material (Table:- 400-1) Plant Mix Method Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means With A Lead Of 1 Km. For Grading-Ii Material , Dry Lean Cement Concrete Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Fully Automatic Computerised Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing. , Cement Concrete Pavement Construction Of Un-Reinforced , Plain Cement Concrete Pavement M30 (Grade), Thickness As Per Design, Over A Prepared Sub Base, With 43/53 Grade Cement As Per Clause 602, Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 31.5 Mm, Mixed In Fully Automatic Computerised Batching Plant Compatiable With Printer And Pen Drive And Transported To Site In Transit Mixer For Having Continuous Agitated Mixer, Manufactured As Per Approved Mix Design Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , With All Lead And Lift Including Cost Of Admixtures In Recommended Portion As Per Is 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer In Charge Laid With A Fixed Form Paver (Laying And Fixing Of 150 Micron Thick Polythene Film And Finished In Continuous Operation Including Provision Of construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days Using Water Finishing To Lines And Grade As Per Drawing And Morth Specification Clause 602 With All Required Equipments (Dowel Bars & Tie Bar Will Be Paid Seprately). , Wet Mix Macadam Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mixer (Pug Mill), Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers In Sub-Base/Base Course On A Well Prepared Sub-Base And Compacting With Smooth Wheel Roller Of 80 To 100Kn Weight To Achieve The Desired Density Including Lighting, Barricading And Maintenance Of Diversion, Etc As Per Tables 400-12 & 400-13 And Morth Specification Clause 406 By Mechanical Means With A Lead Of 1 Km. , Prime Coat Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base(Wbm/Wmm) Using Truck Mounted Sprayer Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70-1.0 Kg/Sqm Using Mechanical Means As Per Morth Specification Clause 502 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Providing And Laying Bituminous Concrete With 100-120 Tph Batch Type Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Minimum @ 5.2 & 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specifications Clause 507 Complete In All Respects For Grading-Ii(13 Mm Nominal Size) Bitumen (Vg-30) , Dismantling Of Cement Concrete Pavements As Per Morth Specification Clause 202. Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately , Excavation For Structures Earthwork In Excavation For Structures As Per Drawing And Morth Specifications Clause 304.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 plain cement concrete Grade M 10 Nominal Mix 1:3:6 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 Reinforced Cement Concrete Grade M 20 , Supplying, Fitting, And Placing Hysd Bar Reinforcement (Primary Steel) In Foundation, Substructure And Superstructure At Any Level Complete As Per Drawing And Morth Specifications Clauses 1009,1600 And 2302 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 20 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 25 , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Morth Specification Clauses 1409, 2204.4, 2206.4 & 2706 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Morth Specifications Clauses 1700, 2302 And 2304 Reinforced Cement Concrete Grade M 30 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 Nominal Mix , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Filler Joint Providing And Fillling Joint Sealing Compound As Per Drawings And Morth Specifications With Coarse Sand And 6 Per Cent Bitumen By Weight Clause 2604 , Filler Joint Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Morth Specifications Clause 2604 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Morth Specification Clause 2204.6 & 2504.2.2 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Morth Specification Clause 304.3.7 & 2204.6 Granular Material , Construction Of Reinforced Cement Concrete Railing Of M 25 Grade In Cast-In-Situ With 20 Mm Nominal Size Aggregate, True To Line And Grade, Tolerance Of Vertical Railing Post Not To Exceed 1 In 500, Centre-To-Centre Spacing Between Vertical Posts Not To Exceed 2000 Mm As Per Drawing And Morth Specifications Clauses 1700, 1500 And 2703.3 , Providing And Laying Reinforced Cement Concrete Pipe Np3 As Per Design In Single Row Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2905. 1000 Mm Dia , Providing And Erecting Typical Citizens Information Board As Per Approved Drawing & Specification Made Of Two Ms Sheet Of 1.6 Mm Thick Each Of Size 900Mm X 750Mm Stiffend By Angle Iron 25Mmx25mm X 3Mm All Around The Plate & Plates Fixed On Frame Of 75Mm Dia Pipe Of 12 Swg Sheet (Vertical Post 3050 Mm With Angle Holdfasts And Horizontal Member 900Mm) To Be Joined By Embedded In Cement Concrete M-15 Grade Of Block Of 600Mmx 600Mm X 750 Mm Size Below Ground Level As Per Enclosed Drawings & As Directed By Engineering Incharge. All Ms Will Be Stove Anmeled On Both Side Lettering. Figuring And Border Will Be With Ready Mixed Synthethic Enamel Paint Of Superior Quality In Required Shade And Colour Etc Complete In All Respect. All Sections Of Framed Post And Steel Tube Will Be Painted With Primer And Two Coat Of Epoxy Paint As Per Drawing And As Per Specification.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
7.
Housing Urban and Rular Development #11173268 Technical Bid
Tender for Granular Sub-Base With Close Graded Material (Table:- 400-1) Plant Mix Method Providing Laying Spreading And Compacting Specified Graded Sand, Gravel (Crushed Stone) As Per Table 400-1,400-2 Or Any Other Course Material As Per Design Mix, As Per Cbr In Sub Base Course Including Premixing The Material At Omc In Wet Mix Plant, Carriage Of Mixed Material Spreading In Uniform Layers With Motor Grader F.E Loader On A Prepared Base And Compacting With Vibratory Roller To Achieve Desired Density (As Per I.S.2720) Including All Material, Labor, Machinery, Lighting Guarding, Barricading And Maintenance Of Diversion Complete.[Morth Specification : Clause 401]. By Mechanical Means With A Lead Of 1 Km. For Grading-Ii Material , Dry Lean Cement Concrete Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Fully Automatic Computerised Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing. , Cement Concrete Pavement Construction Of Un-Reinforced , Plain Cement Concrete Pavement M30 (Grade), Thickness As Per Design, Over A Prepared Sub Base, With 43/53 Grade Cement As Per Clause 602, Coarse And Fine Aggregates Conforming To Is:383, Maximum Size Of Coarse Aggregate Not Exceeding 31.5 Mm, Mixed In Fully Automatic Computerised Batching Plant Compatiable With Printer And Pen Drive And Transported To Site In Transit Mixer For Having Continuous Agitated Mixer, Manufactured As Per Approved Mix Design Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , With All Lead And Lift Including Cost Of Admixtures In Recommended Portion As Per Is 9103 To Accelerate/ Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer In Charge Laid With A Fixed Form Paver (Laying And Fixing Of 150 Micron Thick Polythene Film And Finished In Continuous Operation Including Provision Of construction And Expansion, Construction Joints, Applying Debonding Strips, Primer, Sealant Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14-Days Using Water Finishing To Lines And Grade As Per Drawing And Morth Specification Clause 602 With All Required Equipments (Dowel Bars & Tie Bar Will Be Paid Seprately). , Wet Mix Macadam Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mixer (Pug Mill), Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers In Sub-Base/Base Course On A Well Prepared Sub-Base And Compacting With Smooth Wheel Roller Of 80 To 100Kn Weight To Achieve The Desired Density Including Lighting, Barricading And Maintenance Of Diversion, Etc As Per Tables 400-12 & 400-13 And Morth Specification Clause 406 By Mechanical Means With A Lead Of 1 Km. , Prime Coat Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base(Wbm/Wmm) Using Truck Mounted Sprayer Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70-1.0 Kg/Sqm Using Mechanical Means As Per Morth Specification Clause 502 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Providing And Laying Bituminous Concrete With 100-120 Tph Batch Type Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Minimum @ 5.2 & 5.4 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specifications Clause 507 Complete In All Respects For Grading-Ii(13 Mm Nominal Size) Bitumen (Vg-30) , Dismantling Of Cement Concrete Pavements As Per Morth Specification Clause 202. Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately , Excavation For Structures Earthwork In Excavation For Structures As Per Drawing And Morth Specifications Clause 304.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material. Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 plain cement concrete Grade M 10 Nominal Mix 1:3:6 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Morth Specifications Clause 1702, 1703, 2102 & 2104 Reinforced Cement Concrete Grade M 20 , Supplying, Fitting, And Placing Hysd Bar Reinforcement (Primary Steel) In Foundation, Substructure And Superstructure At Any Level Complete As Per Drawing And Morth Specifications Clauses 1009,1600 And 2302 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 20 , Plain/Reinforced Cement Concrete In Substructure Complete As Per Drawings And Morth Specification Clauses 1700 And 2200 For Height Upto 5 M Reinforced Cement Concrete Grade M 25 , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Morth Specification Clauses 1409, 2204.4, 2206.4 & 2706 , Providing And Laying Reinforced Cement Concrete In Superstructure As Per Drawing And Morth Specifications Clauses 1700, 2302 And 2304 Reinforced Cement Concrete Grade M 30 , Plain Cement Concrete M 15 Ordinary Grade (1:2.5:5) Levelling Course Below Approach Slab Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 Nominal Mix , Reinforced Cement Concrete M 25 Grade Approach Slab Including Reinforcement And Formwork Complete As Per Drawing And Morth Specifications Clauses 1700 And 2704 , Tack Coat Providing And Applying Tack Coat With Bitumen Emulsion (Rs-1) Using Emulsion Distributor At The Rate Of 0.20 To 0.30 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Morth Specification Clause 503. , Filler Joint Providing And Fillling Joint Sealing Compound As Per Drawings And Morth Specifications With Coarse Sand And 6 Per Cent Bitumen By Weight Clause 2604 , Filler Joint Providing And Fixing In Position 20 Mm Thick Premoulded Joint Filler In Expansion Joint For Fixed Ends Of Simply Supported Spans, Covered With Sealant Complete As Per Drawing And Morth Specifications Clause 2604 , Providing And Laying Filter Media With Granular Crushed Aggregates As Per Specification To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Providing Over The Entire Surface Behind Abutment, Wing Wall, Return Wall To The Full Height, Compacted To Firm Condition Complete As Per Drawing And Morth Specification Clause 2204.6 & 2504.2.2 , Backfilling Behind Abutment, Wing Wall And Return Wall Complete As Per Drawings & Morth Specification Clause 304.3.7 & 2204.6 Granular Material , Construction Of Reinforced Cement Concrete Railing Of M 25 Grade In Cast-In-Situ With 20 Mm Nominal Size Aggregate, True To Line And Grade, Tolerance Of Vertical Railing Post Not To Exceed 1 In 500, Centre-To-Centre Spacing Between Vertical Posts Not To Exceed 2000 Mm As Per Drawing And Morth Specifications Clauses 1700, 1500 And 2703.3 , Providing And Laying Reinforced Cement Concrete Pipe Np3 As Per Design In Single Row Providing And Laying Reinforced Cement Concrete Pipe Np3 For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2905. 1000 Mm Dia , Providing And Erecting Typical Citizens Information Board As Per Approved Drawing & Specification Made Of Two Ms Sheet Of 1.6 Mm Thick Each Of Size 900Mm X 750Mm Stiffend By Angle Iron 25Mmx25mm X 3Mm All Around The Plate & Plates Fixed On Frame Of 75Mm Dia Pipe Of 12 Swg Sheet (Vertical Post 3050 Mm With Angle Holdfasts And Horizontal Member 900Mm) To Be Joined By Embedded In Cement Concrete M-15 Grade Of Block Of 600Mmx 600Mm X 750 Mm Size Below Ground Level As Per Enclosed Drawings & As Directed By Engineering Incharge. All Ms Will Be Stove Anmeled On Both Side Lettering. Figuring And Border Will Be With Ready Mixed Synthethic Enamel Paint Of Superior Quality In Required Shade And Colour Etc Complete In All Respect. All Sections Of Framed Post And Steel Tube Will Be Painted With Primer And Two Coat Of Epoxy Paint As Per Drawing And As Per Specification.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
8.
Public Administrative Department #11047153 Technical Bid
Tender For Re-Tender Purchase Tools, Equipment And Instrument For Industrial Training Institute (As Per New Syllabus -All Trade) , Ac Alternator Slip Ring Puller Specification - Variable Make - Appex / Mahesh / Meco , Air Blow Gun With Standard Accessories Specification - Standard Make - Super Hydro Pneumatic / Royal Sindicate Magipack Automation / Air Max , Air Impact Wrench With Standard Accessories Specification - Standard Make - Prime Tools India Ruchak Enterprises Hi - Tech Pnevmatics , Air Ratchet With Standard Accessories Specification - Standard Make - Stanley Ingersol Rand, Enakshi , Anti-Spatter Spray Can Specification - 100 To 300 Ml Make - Esab / Aerosol / Maay/ Jois Suns , C Clamps ,Mild Steel Specification - 50 Mm Make - Taparia / Sagar / Samrat / Powertex , C Clamps Specification - 100Mm Make - Taparia / Sagar / Samrat / Powertax , C Clamps Specification - 150 Mm Make - Taparia / Sagar / Samrat / Powertax , C.I. Sluice / Gate Valve (Flanged Type) Specification - 150Nb Make - L&T / Amco / Amtrch / Delisha Engg / Mnc , Chaser Hard W/V 9 To 40 T.P.I. Set Of 11 Internal. Specification - 9 To 40 Tpi Make - Super Threading Ind.Porttd / Dic Tools Well Cut Tools / Surya Engg , Chaser Hard W/V 9 To 40 T.P.I. Set Of 11External. Specification - 9 To 40 Tpi Make - Well Cut Tools /Surya Engg /Super Threanding / Dic Tools , Chipping Hammer With Metal Handle Specification - 250 Grams Make - Supra / Abm Tools / B R Kumar , Chisel Firmer With Wooden Handle Specification - 6 Mm X 200Mm Make - Bgi Tools / Taparia / Abm Tools / B R Kumar / Supra , Combination Drill / Centre Drill Specification - A3,A4 & A5 Make - Addison/ It / Sandvik / Dic Tools / Vega Tools / Nd Tools / Uncut Tools , Connecting Rod Alignment Fixture 1 Specification - Standard Size Make - Siddheshwar Engg / Gbb Industries / Max Preci Machine Pvt Ltd / Trinity India Forge Tech Pvt. Ltd. , Crimping Tool Set Hydraulic Specification - 16 Sq. Mm To 95 Sq. Mm Make - Taparia / Sagar / Samrat / Indigrust Yok -300 , Crimping Tool Specification - Dia Range 1.5 Sq. Mm To 16 Sq. Mm Make - Taparia / Jain Son/Lenden Hydrolic , Cylindrical Milling Cutter Specification - Ø 63 X 70 X Ø 27 Mm Make - Addison/ It / Sandvik / Globlehunt Engg / Expert Tool Indu , Dovetail Cutter Specification - Dia 20 X 8 Mm Shank X 60° Make - Addison/ It / Sandvik /Micro Sharp / Adroit Tooling / Shree Tools , Drift Punch Copper Specification - 10 X 15 1/2 Mm Make - Taparia / Sagar / Samrat / Bgi Tools / Parwa Metal Tech , Drill Angle Gauge Specification - 45,60,90 Make - Metrix Plus / Precise Gauges Mikronix Associates / Kristeel , Drill Chuck Specification - 13 Mm Capacity With Key & Arbour Mt- 3 Make - Balaji Engg /East Man Cost & Forge / Kta/ Sagar , Drill Chuck Taper Shank Specification - 16 Mm Capacity Make - Siddhi Preision Pvt Ltd /Trigon Enterprises / Taj Enterprises / Kta / Sagar / Sanou/ Rr/ Saifro , Drill Drift Specification - 200 Mm Hardened And Black Finish Make - Abm Tools Alok Tools / Precision Drill Draft , Drill Hand Brace Specification - 0 To 10 Mm Make - Bone Drills Bgi Tools / Akshar Industries , Drill Point Angle Gauge Specification - Standard Make - Mitutoyo /Bgi Tools / Abm Tools / Kristeel , Drill Twist Taper Shank H.S.S Specification - 8 Mm To 20Mm By 0.5Mm H.S.S. Make - Addison/ It / Sandvik/ Bgi / Indeavour Technologies , Earth Clamp Specification - 600A Make - Esab / Shree Shakti Industries /Hero Industries , Electrician Helmet Specification - Yellow Colour Make - Frp Shock Proof Tata / Hepro / Hooneywell Pvt Electrical , Equal Angle Cutter Specification - Ø 75X 30 X Ø 27 - 90° Make - Addison / It / Sandvik / C R Tools / Dic Tools / Maglix Tools , Feeler Gauge Specification - 20 Blades (Metric) Make - Sadguru Enterprises Bombay Tools / Perfect Gauge & Tools / Mitutoyo / Nigaka Seiki (Sk) , Filler Gauge Specification - 0.05 Mm - 1 Mm Make - Sadguru Enterprises Bombay Tools / Perfect Gauge & Tools / Mitutoyo , Flat Tongs Specification - 350 Mm Long Make - Bgi Tools / Sudershan / Prayaga Precision , Glass Magnifying Specification - Ø 75 Mm Make - Nitro / Mukul Enterprises / V Tech / Oxford /Eisco , Gmaw Torch Nozzle Tip Specification - Size 0.8, 1.0, 1.2 (In Mm) Make - Esab / Miller / Honely/ N G Weld / Gmaw Torch , Goggles (Fibre Plastic Cup) Safety Glasses (Transparent Glasses) Specification - Standard Make - Esab / L&T/ Miller/ N G Seld / Jaxy Eye Wear / Kumsons / Kti , Groover Specification - 3, 4, 6 Mm Make - Tool Buy / Halinex Steel / Mahabali Steel , Hack Valve Make - Demfost , Hack Saw Frame Fixed Specification - 300 Mm Make - Taparia / Sagar / Samrat/ Lovely / Lenox /Wulf / Jolly , Hacksaw Frame Adjustable Specification - 200 - 300 Mm Make - Taparia / Sagar / Samrat/ Lovely / Lenox /Wulf , Hacksaw Frame Fixed Specification - 150 Mm Make - Taparia / Sagar / Samrat/ Lovely / Lenox /Wulf , Hacksaw Frame Solid Type Specification - 300 Mm Make - Taparia / Sagar / Samrat/ Lovely / Lenox /Wulf , Hammer (Nylon Face) Specification - 30 Mm Make - Taparia / Sagar / Samrat / Flucon / Cromwell Tools , Hammer Copper With Handle Specification - 1 Kg Make - Taparia / Sagar / Samrat/ Wedco / Lovely / Cromwell , Hammer Mallet Make - Taparia / Sagar / Samrat / Proxima /J K Maini / Bombay Tools , Hand Drill Machine Cap Specification - Capacity 6 Mm Make - Prabhat Enterprise / High Life Indu /Sagar , Hand Operated Crimping Tool For (I) Crimping Up To 4Mm And (Ii) For Crimping Up To 10 Mm Specification - Used For Lan Crimping Make - Harting Hand / Knipax/ Hks , Hand Reamers Adjustable Specification - 10.5 To 11.25 Mm, 11.25 To 12.75 Mm, 12.75 To 14.25 Mm, 14.25 To 15.75 Mm Make - J.K / Taparia / Sagar/ Omex / Bharat Tools /West Sard / Addison , Heating Kit With Infrared Bulb Specification - 200 W Capacity Make - Philips / Crompton/ Bajaj / B. Arm Medical / Bgi Tools , Hollow Punch Set Of Seven Pieces Specification - 6 Mm To 15Mm Make - Bgi Tools / East Man / Taparia , Injector Cleaning Unit Specification - Std 0-140 Psi Make - Techmo / Taparia / Sagar/ Atp/ Biltek / Uprima , Knife Double Bladed Electrician Specification - 100 Mm Make - Taparia/Sagar / Samrat /Bgi , Leather Apron Leather Make - Esab / Seema / Messer/ /Crux Weld India / Pyrotec India , Leather Hand Sleeves Specification - 16 Make - Esab / Seema / Messer / Sparkle Enterprise / Safety Product Pvt Ltd , Leg Guards Leather Make - Esab / Seema / Messer / Karam Safety / Unique Udyog , Magneto Spanner Set Specification - 8 Spanner Set Make - Taparia / Sagar / Samrat / Bgi/ Lms Lichfield , Magneto Spanner Set With 8 Spanners Make - Taparia / Sagar / Samrat / Bgi / Lms Lichfield , Magnifying Glass 75 Mm With Magnifying Factor 10 X Specification - Ø 75 Mm X 10X Make - Sagar /Samrat /Oxford / Eisco , Measuring Steel Tape Specification - 5 Meter Make - Taparia / Sagar / Samrat / Freemans / Yorker / G R Mart , Multi Angle Magnetic Clamp Set Specification - Metal Base (18X10X10 Cm) Make - Niconself / Taparia / Sagar / Homdum / Flemingo / S M Extrusion , Multi Meter Digital Type Specification - Lcd Display Make - Mahesh / Mino Impex / Bsk Technologies / Mastak/Meco / Fluke , Neon Tester Specification - 500 V Make - Taparia / Sagar / Samrat / Tata Sampann , Oil Pump For Dismantling And Assembling. Make - Ford / Mahindra / Tata / Automotive , Parallel Shank End Mills Specification - Ø6, Ø10 And Ø 16 Are (Double Fluted), Ø 20 Mm & Ø 25 Mm (Four Fluted) Make - Addison / It / Sandvik / Miranda , Pipe Cutter Wheel Type. Specification - Capacity 06 Mm To 25 Mm Make - Bgi /Vici Joor /Tameson , Pipe Cutting Tool Tube Cutting Tool Specification - 150 Mm Make - Taparia/Sagar / Samrat /Ingco /Ridgid /Jon Bhandari , Pipe Flaring Tool Specification - 3/16,5/8 Clamp Make - Hvac/ Lovely / Sartaj/ Taparia /Digicop / Ingco , Piston Ring Expander And Remover. Specification - Standard Size Make - Mega / Aramox / Aasons , Plumbing Hammer Ball Pen Specification - 200 Grams Make - Taparia/Sagar / Samrat / Bgi / Forbes Kenpo , Portable Oil Monitoring Indicator Make - Semco / Flowtech Measuring / Fill Pro Sensors/ Spike Control / Spacon Instrument , Power Tools For Fastening Specification - Capacity 10-18Mm Make - Bosch / Taparia / Sagar /Ingico / I Bell /Tomahawk , Punch Letter Specification - 5 Mm Make - Taparia / Sagar / Samrat / Somnex / Keshav Letter / Rs Pro , Rake Maker Make - Blace Buro Tools , Rawal Plug Tool Specification - 6 Mm Make - Lovely / Metro Tools /Mm Tools , Scissors Blade Specification - 200 Mm Make - Rs Pro /Madan /William / Gemsy , Scissors Blade Specification - 150 Mm Make - Rs Pro /Madan /William / Gemsy , Screw Driver Specification - 200 Mm X 9 Mm Blade Make - Taparia / Sagar / Samrat , Screw Driver Specification - 300 Mm X 9 Mm Blade Make - Taparia / Sagar / Samrat , Set Of Sockets Morse Taper Specification - (0-1, 1-2 And 2-3) Make - Repair Renovation Brand / Simren Tools / Misumi India , Set Of Stock And Dies -Metric Specification - M6 To M24 Make - Taparia / Sagar / Samrat / C K Tools / Bgi / Meesho / Gsk Cut / Indittust , Sheet Metal Gauge Specification - Standard Size Make - Fine Teck Engg/ Super Gauge India / Laxmi Indu , Shell End Mill Specification - Ø 50 X 36 X Ø 22 (Preferably Inserted Tip Type) With 50 Insert Make - Addison / It / Sandvik / Edge India /Misumi India /Maxwell Tools , Shell End Mill Specification - Ø 75 Mm X 50 X Ø 27 (Preferably Inserted Tip Type) With 50 Insert Make - Addison / It / Sandvik / Edge India / Misumi India / Maxwell Tools , Side And Face Cutter Specification - Ø 80 X 10 X Ø 27 Mm Make - Addison / It / Sandvik /Maxwell /Rewo /Indian Tools / Misumi India , Side And Face Milling Cutter Specification - Ø 100 X 10 X Ø 27 Mm Make - Addison / It / Sandvik /Maxwell /Rewo / Indian Tools /Misumi India , Sine Bar With Centers Specification - 200 Mm Make - Cristal / Mitutoyo /Unity Marketix Pro /Groz Engg /Sheth Engg , Single Angle Cutter Specification - Ø 75 X 16 X Ø 27 - 60° Make - Addison / It / Sandvik /Misumi India /Maxwell /Dzc Tools , Sleeve Drill Morse Taper Specification - No. 0 - 1, 1-2, 2-3, 3 - 4, 4 -5 Make - Bds Machine Porttd /Rr /Trumil / Othmro / Samarat / Tapariya , Slip - On Forged Steel Flange Specification - 150 Nb, Ansi-B16.5 Make - Britex Engg /Octal /Api International /Dhanwant Metal /Riddhi Siddhi Metal , Smoothing Cutters Specification -50 Mm X200 Mm Make - Addison / Taparia / Sagar / Lindstrom /Knifex /C K Senso Plus / Bgi Tools , Snip Bent Left Cut Specification - 250 Mm Make - Taparia / Sagar / Samrat /Bgi Tools /Stanley /Hogert , Snip Sheet Metal Curved Nose Specification - 200 Mm Make - Taparia / Sagar / Samrat /Bgi Tools /Rs Combonents /Hoffmann , Snip Sheet Metal Straight Nose Specification - 200 Mm Make - Taparia / Sagar / Samrat / Bgi Tools /Rs Combonents / Hoffmann , Soldering Copper Hatchet Type Specification - 500 Gms Make - Taparia/Sagar / Samrat / Lovely /Estovir Tech / Daga Metal / N S Soldertek , Spanner Clyburn Specification - 150 Mm Make - Taparia / Sagar / Samrat /Stonley , Spanner T. Flocks For Screwing Up And Up - Screwing Inaccessible Positions Specification - 8 Mm To 32 Mm Make - Taparia / Sagar / Samrat /Hamco Is Pat Pvt / Multiac /As Man Tools India , Spanner T. Flocks For Screwing Up And Up -Screwing Inaccessible Make - Taparia / Sagar / Samrat /Hamco/ Maltitec /Asmaa , Spark Plug Spanner Specification - 14 Mm X 18 Mm X Size Make - Classic /Mec /Jpt /Autoplex , Spindle Key Specification - Smwop Hi-Tech Make - Addison / Taparia / Sagar / Bgi Tools /Abm Tools / Hero , Spirit Level Engineers Precision Specification - 25 Mm Make - Freemans /Bosch /Magnetic / Taparia , Spirit Level Metal Type - 2 Specification - 300 Mm Basic Length, Accuracy 0.1Mm/Meter Make - Taparia / Sagar / Samrat / /Fremans /Basch , Spirit Level Precision Metallic Specification - 0.05 Mm / 200 Mm Make - Taparia / Sagar / Samrat /Bgi Tools /Fremans /Bosch , Spring Tension Tester Specification - Standard Make - Jk Automation / Canon Testing / Star Identification , Stake Hatchet Specification - 300 X 200 X 20 Mm Make - Taparia / Sagar / Samrat /Bgi Tools Diamond Tools , Stake Grooving Specification -100 X100X 300Mm Make - Taparia / Sagar / Samrat /Bgi Tools /Diamond Tools , Static Balancing Stand For Grinding Wheel Specification - Ø 450 Mm Wheel Make - Vertex /World Wide Engg /Precision Machine , Grind Store Machinery India , Steel Measuring Tape 10 Meter In A Case Specification - Meter Make - Ereemans /Amici Tools / Total Steel , Stud Extractor Ezy - Out Specification - Set Of 8 Make - Chaudhari Enterprises / Bgi Tools /Prokomon , Stud Extractor Set Of 3 Specification - Assorted Size Make - Taparia / Sagar / Samrat / Bgi Tools /Prokomon , Stud Remover With Socket Handle Specification - Standard Size Make - Taparia / Sagar / Samrat / Dewill /Prokoman / Bgi Tools , Surface Plate - Granite With Stand And Cover Specification - 1000 X 1000 Mm Make - Luthra /Mgre /Ntmt/ Prime Autotech / Omega / Sagar , T Slot Cutter With Parallel Shank Specification - Ø 17.5 X 8 Mm Width X Dia. Of Shank 8 Mm Make - Addison / It / Sandvik / Dic Tools /Abm Tools /Jyoti Tools , Tap & Die Specification - B. A. No. 0 To 10Mm In A Box Make - Humma / Taparia / Samrat / Chapional / Hogert / Totem , Tap & Die Set Specification - B.S.F. Up To 1 Inch Make - Humma / Taparia / Samrat /Champion /Hogert / Totem , Taper Shank Drills Specification - Ø 12 Mm To Ø 20 Mm In Steps Of 1 Mm Make - Addison / It / Sandvik / Cromwell Tools /Dic Tools , Taps And Dies Complete Set Specification - 5, 6, 8, 10 & 12 Mm Set Of 5 Make - Humma / Taparia / Samrat / Cromwell /Dic / Bgi / Hogert / Totem , Taps And Dies Complete Set In Box (Metric) Specification - Metric Size Make - Humma / Taparia / Samrat / Cromwell / Dic /Bgi / Hogert / Totem , Taps And Dies Complete Sets (5 Types) Make - Humma / Taparia / Addison / Hi Spec Metric / Hogort , Taps And Top Wrenches - Metric Specification - Metric Size 6 To 18 Mm Make - Humma / Taparia / Samrat /Yato / Assorts Repair Renovation /Acs Tools /Groz Tap Wrench , Temperature Gauge Dial Type - 4 Ø Specification - 0 - 100 Deg Make - Mitutoyo / Yayin Automation / H -Guru / Ji Japsin / Dulux / Becco , Tenon Saw Specification - 250 Mm Make - Taparia / Sagar / Samrat / Spear & Jackson / Irwin / Presyo Tenon , Tool Makers Button Specification - Assorted Size Make - Taparia / Sagar / Samrat / Bgi Tool /Cromwell , Try Square Engineer Specification - 150 Mm Make - Taparia / Sagar / Samrat / Rs Componnents / Craftsman Space / Kristeel , Tweezers, Ss Specification - 150 Mm Make - Mehta Tools /Misumi India / Sun Rise Tools , Valve Spring Compressor Universal Specification - Standard Make - Tarpaia / Sagar / Samrat / Bgs /Automartez / Universal / Prodiy , Welding Hand Shield Fibre Specification - Visor Thickness 600 Micron Size Medium Make - Miller / Esab / L&T /Safety Weld Hand , Welding Helmet Fibre Specification - Superfine Fibre Make - Miller / Esab / L&T /Safety Weld Hand , Wire Gauge (Metric) Specification - Standard Size Make - Bgi Tools / Thermo / Kristel Epi Tech , Wire Gauge Metric & British. Specification - Steel Plate Embossing Converse Of British & Metric Make - Bgi Tools / Thermo /Kristel / Epi Tech , Wood Firmer Chisel Specification - 6,12,25 Mm Make - J.K / Sagar / Samrat /Ronix Tools /Bgi Tools /Henry Taylor , A.C. Energy Meter Specification - Three Phase, 15 A , 440 V Induction Type Make - Meco / Mahesh / Techno Meters & Electronics / Ampro / Bgi / Boparai , A.C. Energy Meter Specification - Single Phase, 10 A, 240 V Induction Type Make - Meco / Techno / Hpl /Ampro / Bgi / Boparai , Ac Starters Make - Siemens / Crompton / L&T /Havells /Boparai A. Resistance Type Starter Make - B. Direct On Line Starter Make - C. Star Delta Starter- Manual Make - D. Star Delta Starter - Semi Automatic Make - E. Star Delta Starter - Fully Automatic Make - F. Star Delta Starter - Soft Starter Make - G. Auto Transformer Type Make - Specification - For A.C Motors Of 2 To 5 H.P. Make - , Battery -Charger Specification - 0-6-9-12 -24 - 48 V, 30 Annual Periodical Maintenance Make - Sony/ V-Tec / Erh /Rainbow /Protech Engg /Luckgulu , Blow Lamp, L P Gas Specification - 1 Litre Make - Dws Blow Long /Bgi Tools , Brake Test Arrangement With Two Spring Balance Rating Specification - 0 To 25 Kg Make - Bgi Tools /R Tech Enterprise / J J Techro Sol , Car Jet Washer With Standard Accessorise Specification - Minimum3 Phase 1Hp 1400 Rpm Motor, 3 Reciprocating Plungers With Pressure Regulator & Gauge. 8 M Water Hose With Pressure Adjustable Brass Nozzle. Make - Elgi / Rotomac / Auto Man Unicorn/ Bosch /Power Wash /Bgi , Compressors Testers For Small Hermetic Compressors Specification - Fixed With Electrical Input / Output Indicating Facilities Make - Siemens / Crompton / L&T / Bgi Tools /Amv Scientific Construction Of , Current Transformer Specification - 415 V, 50Hz, Ct Ratio 25 / 5 A, 5Va Make - Mahesh / Meco / Teco /Schneider Elect /Lct , Cylinder Liner- Dry & Wet Liner, Press Fit &Slide Fit Liner Specification - Standard Make Make - Bgi Tools / Kirloskar / Mahale / Tata , Dc Power Supply Specification - 0 - 30 V, 5 Annual Periodical Maintenance Make - Mahesh / Meco / Teco /V Guru /Sugon /V. Annual Repair T Ech Hori , Different Type Of Piston Model Flat Head, Convex, Concave, Deflector Etc. Specification - Standers Acc. Size Make - Cummins / Super King / Jindal/ Dynamic Piston / Ipl /Mexon Piston / Jj Raj Piston , Digital I.C. Trainer Specification - Digital I.C. Trainer 7 Segment Display And Bread Board Make - Micro Logics / Crown / Sceniot Technologist/ Bgi Tools / Maxwell , Discrete Component Trainer Specification - Discrete Component (For Diode And Transistor Circuit) With Regulated Power Supply + 5,0- 5 V,+12 ,0-12 V Make - Micro Logics / Crown / Sceniot Technologist/ Maxwell /Eductek /Mars / Neofit , Electric Iron Specification - Automatic - 750 W, 240 V Make - Philips / Crompton/ Bajaj / Lg / Havells /Usha , Electric Kettle Specification - 1500 Watts, 240V Make - Philips / Crompton/ Bajaj / Lg / Milton /Borosil , Fuel Injection Pump (Diesel) Inline / Mahindra Xlehide Make - Mico / Dolphine / Taparia / Bosch /Suntec /Grozloonfoss , Fuel Injection Pump Ve Pump / Distributor Fuel Rotary Pump (Dpc) Pumps / Along With Special Tools And Accessories Specification - Standard Make - Mico / Bosh/ Dolphin /Suntec / Groz /Danfoss , Function Generator Specification - 2 To 200 Khz, Sine, Square, Triangular 220 V, 50 Hz, Single Phase. (Digital Type) Make - Aplab / Sigma / Siemens / Alfa / Ses Instruments /Mars , Gauge, Wire Imperial Stainless Steel Marked In Swg & Mm Specification - Wire Gauge - Metric Make - Osar /Bgi , Geyser (Storage Type) Specification - 10 Litre Make - Bajaj / Philips / Lg /Orient / Aosmith /Havells , Granite Surface Plate Specification - 1600 X 1000 With Stand And Cover Make - Luthwa / Mgre / Prime Ficutech , Granite Surface Plate Specification - 600 X 600X80 Mm Make - Luthwa /Mgre /Ntmt /Prime Acetech / Omega / Sagar , Growler Make - Keg / Tm Craft / Ukeg , Hacksaw Fixed (Pistol Grip) Specification - 200 Make - Cristal / Taparia / Sagar /Lovely /Lanox /Wulf , Hydraulic Jack Hi-Lift Type - Heavy Duty Specification - 3 Ton Capacity Floor Trolley Make - Appex / Tools Vhlla/ Mogilx/ Elephant /Hukums /Marshal , Hydrometer Make - Mahesh / Meco / Teco /Ajanta /Beawmes /Micro Teknic /Lab Soul , Immersion Heater Specification - 1500 Watt, 240V Make - Philips / Crompton/ Bajaj / Lg/ /Havells , Injector - Pintle Type Multi Hole Specification - Tata Motor / Mahindra Make - Mico / Winmax/ Surya / Cummins , Injector Testing Set Specification - (Hand Tester) Make - Mico / Winmax/ Surya /Gallop / Bosch /Rashi Tools , Knife Switch Dpdt Fitted With Fuse Terminals Specification - 16 Annual Periodical Maintenance Make - Ashoka / Filnor / Radioshack /Bgi Toools /Sdm /Stonley , Knife Switch Tpdt Fitted With Fuse Terminals Specification - 16 Amp/ 440 V Make - Ashoka / Filnor / Radioshack / Stanley , Laboratory Type Induction Coil Specification - 1000 W Make - Siemens / Meco / Philips /Bgi /A G Enterprises , Lifting Jack Screw Specification - 20 Ton Make - Appex / Universal / Bajaj / Bharat /Indeer /Marshal , Lifting Jack Screw Type Specification - 3 Ton Capacity Make - Appex / Universal / Bajaj /Bharat /Indeer /Marshal , Limit Switch Specification - Limit Switch, Liver Operated 2A 500V, 2- Contacts Make - Siemens / Meco / Philips /Oxcell /Pizzato /Vraj , Linear I.C. Trainer Specification - Linear I.C. Trainer With Regulated Power Supply 1.2V To 15V Pic Socket 16 Pin And 20 Pin With Bread Board Make - Micro Logics / Crown / Sceniot Technologist /H L Scientific / Chopra & Construction Of /Maxwell , Load Bank ( Lamp / Heater Type) Specification - 6 Kw, 3Ph Make - Geltronix / Onics / Akansha / Bgi Tools /Jayram Electronics , Lux Meter Specification - Lux Meter Lcd Read Out 0.05 To 7000 Lumens With Battery Make - Mahesh / Meco / Teco /Flute / Extech Instrument , Magnetic Flux Meter Specification - 0-500 Tesla Make - Taparia/Sagar / Samrat /Aptex /Polytronic , Marking Out Table Material Cast Iron With Mild Steel Std. With Std. Specification - 90X60X90 Cm. Make - Omega / Taparia / Sagar / Luthera / Bgi , Mccb Specification - 100Amps, Triple Pole Make - Siemens / Meco / Philips / Schenider /Polycab /L & T , Megger, Hand Driven Specification - Analogy - 500 V Make - Aplab / Meco / Siemens / Denko /Yokins /Waco Yokins / Waco , Megger Specification - 1000V Make - Aplab / Meco / Siemens / Denko , Mixture & Grinder Domestic Specification - 750 W, 240 V Make - Sumit / Philips / Jyot//Bajaj , Multi Meter Analogue Type Make - Mahesh / Meco / Teco/ Hlt / Hanna /S L Tech /Metravi Instrument , Ohm Meter; Series Type & Shunt Type, Portable Box Type Specification - 50/2000-Ohm Analog Make - Mahesh / Prestige Electronics / Otwane//Tekson /Bgi , Oil Testing Kit Specification - Oil Testing Kit 230 V, Single Phase 50 Hz 60 Va Output 0-60 Kv Variable Make - Bosch / Aajjo / Deluxe Corporation /Kleenoij /Visgae , Pin Type, Shackle Type, Egg Type & Suspension Type Insulators Including Hardware Fitting Specification - N.A Make - Bgi /Adity Birla Insulation / Dhel Insulators , Pipe Bender M/C Spool Type With Stand Manually Operated Up To 25 Mm Cold Bending Specification - Up To 25 Mm Cold Bending Make - Humma / Taparia / Sagar / Voltz / Tools Villa / Bgi , Potential Transformer Specification - 415 V, 50Hz, Pt Ratio, 440V/110V,10Va Make - Meco / Electronic / Acme /Eteva / Mpi / Brilltech /Macro , Power Supply Specification - 0-12 V, Lamp Make - Anchor/ Skyska / Philips /Mw / Parker , Quick Couples, Process Tube Adopter Specification - ¼ & 3/8 5/16, 3/16 Make - Tmc /Robinar /Parkar , Rheostat (Sliding Type) Specification - 0 - 25 Ohm, 2 Annual Periodical Maintenance 0 - 300 Ohm, 2 Annual Periodical Maintenance 0 -1 Ohm, 10Amp 0 -10 Ohm, 5 Annual Periodical Maintenance Make - Micro Technologies / Avain Lab / Tilak Scientific / H L Scientfic / Mahehsh Electric /Ajanta , Rotary Switch Specification - 16 A/440V,3Positiom Make - Meco / L&T / Servo / V Guard / Suraj /Salzeer , Set Of Stock And Dies - Unc, Unf And Metric Specification - Standard Make - Humma / Taparia / Sagar /Cromwell Tools /Atson Tool / Totem , Single Phase Variable Auto Transformer Specification - 0-270 V, 10Amp (Air Cooled) Make - Crown / Sabtron / Sky King /Sunmach /Radic Electric , Solar Panel With Battery Specification - 18 Watt Make - Tata Power Solar/ Adani Solar/ Vikram Solar/ V Guard /Micro Kk , Stop Watch Specification - N.A, Dial Type Make - Swastik / Sidhi Ent. Top Sun /Edutek /Sagar /Pravin , Surface Plate C.I / Granite With Stand And Cover Specification - 600 X 600 Mm Make - Omega / Taparia / Sagar /Luthra /Mgre /Prime Pautech , Tachometer Specification - Analog Type - 10000 Rpm Make - Mitutoyo / Monarch / V Tech /Lutron /Maxtech /Nutronics , Tachometer Specification - Digital Photo Sensor Type - 10000 Rpm Make -Mitutoya /Monarch /V Tech /Maxtech , Tachometer (Counting Type) Make - Meco / Ajanta Export / Micon / Mitutoyo / V Tech , Thermometer Digital Specification - 0° C - 150° C Make- Fibrecrafts India /Spaark Enterprises /H Guru , Thread Pitch Gauge Metric Bsw Specification - No-188 - 122 Make - Mitutoyo /Universal Gauges Rq Ltd / M -Tech Enterprises , Tong Tester / Clamp Meter Specification - 0 - 100 A (Digital Type) Make -Cbm / Divinext /Meco /Kusum , Voltage Stabilizer Specification - Ac Input - 150 - 250 V, 600 Va Ac Output - 240 V, 10 A Make - Bajaj /Crompton / L&T /V Guard / Microtek , Wattmeter Multi-Range Up Specification - 1 Kw Make - Mahesh / Meco / Teco /Yokins / L& T / Cimicisense , Wheat Stone Bridge With Galvanometer And Battery Specification - N.A. Make - Samuel / Tvs / Kalyani /Sametech /Ortex Electronics , Belt Tensioner Gauge Specification - Measurement Range -0-2000 Gauss Measurement Mode Touch Rzobe Resolution - 0.1 Make - Timken Belt / Emf Lurton Precision / Unite - Japan/Otc Tools /Hari Om Electronics / Sonic , Capillary Plug Gauge Specification - 026 To 090 Inch Make - Charlie /Misumi India /Hvzc , Compound Gauge, Digital Type Specification - Diameter 63Mm, With Calibration Set Screw, Scale Vacuum 760Mm Make - Elitech / Jaco / Accutire/Ashcroft /Japsin Instru / Millennium ,Installation , Compression Testing Gauge Suitable For Diesel Engine With Standard Accessories Specification - Capacity 25Kg/Cm2/450 Make - Universal /Sthira /Zorbes/ Toptul , Different Profile Gauges (Plate Type) - For Demonstration Specification - Metric Standard Make - Bgi /Swaroop Autotech , Digital Thermometer Metal Case Specification - Graduated Disc Analogy Type Make - Demfos / Bsk Techoo /Dynamic Gauge Pvt Ltd /Esaw , Engineers Stethoscope Specification - Standard Make - Excluzo Automotive / Taparia /Sagar /Abn Machines / Shakun Dr. More Pen , Gauge - Radius Set Specification - 1 Mm To 25 Mm By 0.5 Mm Make - Kristee /Groz /Inder /Pro , Gauge Plug Specification - Single Ended 5 To 55 By 5 Mm Set Of 11 Pcs Make - Bgi /Mahalaxmi Enterprises / Cromwell Tools , Glow Plug Tester, Std Size Make - Lupson / Mitutoyo /K S Tools /Hogert /Modtech , Multi Meter Digital Specification - Lcd Display Make - Mahesh /Themis To /Mastech , Pressure Gauge Digital Type Specification - Diameter 63Mm With Recalibration Set Make - Elitech / Jaco / Accutire / Neco /Wika / H Guru /Winter , Raiser Specification - 3 Furrow Make - Bahubali /Shaktiman , Screw Pitch Gauge Specification - Acc. Size Make - Mitutoyo / Taparia / Samrat /Kristee /Misumi , Tyre Pressure Gauge With Holding Nipple Specification - 10 Kg /Cm2/150 Ebs / 59 Inch Make - Elgi / Sagar / Samrat / Bgi / Micro Lube /Airmaster , Universal Surface Gauge Specification - 250 Mm Arm Make - Krystal / J Lab /J D Engg / Samrat / Sagar , Vacuum Gauge To Read Specification - 0 To 760 Mm Of Hg. Make - Asama /Sagar /Summit / Tameson /Prm /H Guru , Vernier Calliper Outside, Inside And Depth Specification - 200 Mm /8 Inches With Metric & Inch Scale (L.C. = 0.02Mm) With Nabl Accredited Lab. Certificate Make - Moglix /Yuzuki /Sanyo / Kanon / Mitutoyo , A 4 Cutting Wheels Make - Dewalt / Esab / Messer / Bosch /Dura- Kut /Euromax , A 4 Grinding Wheels Make - Dewalt / Esab / Messer / Bosch /Dura-Kut/ Uromax , Annual Rate Contract Welding Cables Multi Cored Copper Specification - 400/600 Annual Periodical Maintenance As Per Bis Rebel Make - Dewalt / Esab / Messer / Bhurwal /Megacab /Polycab / Neon / Johnson
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Trust & NGO No of Bidders 2
Maharashtra View Result →
9.
Public Administrative Department #10852137 Technical Bid
Tender For Supply, Installation And Commissioning Of Machinery For Shree Saibaba I.T.I, Shirdi. Tools, Equipment, Instrument List (As Per New Syllabus -All Trade) 1) Trade- Fitter , Pipe Cutter 6 To 25Mm Wheel Type Make - Stanley/ Ingco/Taparia / Bharat /Jk , Pipe Bender Spool Type Up To 25.Mm With Stand Manually Operated Make - Beekay / Breeze /Indar/ Voltz /Stanley , Ss And Sc Centre Lathe (All Geared) With Minimum Centre Height 6/150 Mm & Center Distance 1000 Mm Along With 3, 4 Jaw Chuck, Auto Feed System, Coolant Arrangement, Lightening Lamp, Taper Turning Attachment, Safety Guard & Standard Accessories. Make - Kirloskar / Hmt / S Micrometric , Drilling Machine Pillar Sensitive 0-20 Mm Capacity With Swivel Table Motorize With Chuck & Key Make - Panchal / Skp / Eifco /Makita , Drilling Machine Bench Sensitive 0-12 Mm Capacity With Motorize With Chuck & Key Make -Panchal /Skp / Eifco / Makita , Compressor Unit:- Suitable For Pressure - 8 Bar, Delivery-50Lpm Or More, Receiver Capacity-24 Liters Or More, 250V,50 Hz, With Pressure Regulator And Water Separator Make - Fuji / Air Master/ Elgi/Ingersol Rand , Pneumatic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories. Single Acting Cylinder- Max. Stroke Length 50Mm, Bore Dia 20Mm - 1 No. Make - Extreme / Genitic / Parker / Koganei , (Ii) Double Acting Cylinder - Max.Stroke Length 100Mm, Bore 20Mm, Magnetic Type - 1 No. , (Iii) 3/2 Way Valve Manually-Actuated, Normally Closed. - 2 Nos. , (Iv) 3/2- Way Valve Pneumatically-Actuated Spring Return 1 No. , (V) One Way Flow Control Valve - 02 Nos. , (Vi) 5/2-Way Valve With Manually-Operated Switch-1No. , (Vii) 5/2 Way Valve-Pneumatically Actuated Spring Returns. , Viii) 5/2 Way Pneumatic Actuated Valve Double Point-1 , (Ix) 3/2 Way Roller Lever Valve Direct Actuation Normally Closed. - 02 Nos. , (X) Shuttle Vale - 01 No. , (Xi) Two Pressure Valve (And) - 01 No. , (Xii) Pressure Gauge 0-16 Bar - 01 No. , (Xiii) Manifold With Self-Closing Nrv-6 Way - 01 No. , (Xiv) Push Button Station For Electrical Single Point With 3 Illuminated Momentary-Contact Switch (1No + 1 Nc) And 1 Illuminated Contact Switch (1No+1Nc), Contact Load 2 A.- 01 No. , (Xv) Relay Station- With 3 Relay Each With 4 Contact Set (3No + 1Nc) Or Change Over Type, 5 A. - 01 No. , (Xvi) 3/2 Way Single Solenoid Valve With Led - 01 No., , (Xvii) 5/2 Way Single Solenoid Valve With Manual Override And Led - 01 No. , (Xviii) 5/2 Way Double Solenoid Valve With Manual Override And Led - 01 No. , (Xix) Power Supply Unit - Input Voltage 85-265V Ac, Output Voltage; 24V Dc, Out Put Current-Max.4.5A., Short Circuit Proof. - 01No. , (Xx) Profile Plate, Anodized Aluminum. 1100X700Mm. With Carriers, Maintenance Of Punting Frames And Mounting Accessories (Tube Fitted On To The Pneumatic Workstation. - 01 Set , Pneu, Matic Workstation With 40 Square Mm Aluminum Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handle And Individual Locks, On Metallic Full, Panel Drawer Slide , (1) Work Table Size 1200Mm (L) X900Mm (W) X900Mm. (H), With Four Custard Wheel Including Two Lockable Wheel At The Front Side. , Drawer Size - L 460 Mm X W 495Mm. X H 158Mm. Each And Overall Size Of Drawer Unit (Apex) L 470Mm X W 495Mm X H 825Mm , (3) Drawer Slide Height (Apex) 85Mm. , Carrier For Mounting Components, Such As Pb & Relay Boxes. Cut Section Model For Pneumatic Components. , Hydraulic Trainer Kit, Each Consisting Of The Following Matching Components And Accessories Make - Hitachi / /Tecno / Power Tech / Cad Mech Engineering / Equator Hydraulic , 1) Hydraulic Power Pack: - With (1) External Gear Pump Having A Delivery Rate Of 2.5 Improvement (Apex) (A) 1400 Rpm Operating Pressure 60 Bar, Coupled To A Single-Phase Ac Motor (230V Ac) Having Starter Capacitor And On/Off Switch And Overload Protection, , 2) Pressure Relief Valve Adjustable From 0-60 Bar , 3) Oil Reservoir, 5 Liters Capacity Having Sight Glass, Drain Screw, Air Filter And P And T Ports. - 01 No. , Ii) Pressure Relief Valve Pilot Operated - 01 No. , Iii) Drip Tray, Steel 1160Mmx760Mm. - 01 No. , Iv) Pressure Gauge Glycerin- Damped, Indication Range Of 0-100 Bar. - 01 No. , (V) Four-Way Distributor With Five Ports, Equipped With A Pressure Gauge. - 01 No. , (Vi) Double Acting Hydraulic Cylinder With A Control Cam, Piston Diameter 16Mm.,Piston Rod Diameter 10Mm,Stroke Length 200Mm. - 01 No. , (Vii) Suitable Weight For Vertical Loading Of Hydraulic Cylinder - 01 No. , (Viii) Mounting Kit For Weight For Realizing Pulling And Bushing Lead. - 01 No. , (Ix) 3/2 Way Directional Control Valve With Hand Lever Actuation - 01 No. , (X) 4/2 Way Directional Control Valve With Hand Lever Actuation - 01 No. , (Xi) 4/3 Way Directional Control Valve. Closed-Center Position, With Hand Lever Actuation - 01 No. , (Xii) Non Return Valve - 01 No. , (Xiii) Pilot Operated Check Valve Pilot To Open -01 No , (Xiv) One Way Flow Control Valve With Integrated Check Valve. - 01 No. , (Xv) T-Connector With Self-Sealing Coupling Nipples (2 Nos.) And Quick Coupling Socket (1 No.) - 02 Nos. , (Xvi) Profile Plate: - Anodized Aluminum, 100X700Mm With Carriers, Mounting Frames And Mounting Accessories (To Be Fitted Onto The Hydraulic Work Station. - 01 Set , Hydraulic Work Station With 40 Square Mm. Aluminum Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide. , (1) Work Table Size (Apex) L1200Mm. X W900Mm. Xh900Mm. With Four Castor Wheel Including Two Locale Wheel At The Front Side. , Drawer Size (Apex) L460 Mm X W495Mm. X H158Mm Each, And Overall Size Of Drawer Unit (Apex). L470Mm X W495Mm. X H825Mm. , (3) Drawer Slide Height (Apex) 85Mm. Cut Section Models For Hydraulic Components. , D.C. Shunt Generator With Control Panel,2.5 Kw, 220V & 3 Phase Squirrel Cage Induction Motor, 5 Hp,440V With Control Panel & Star Delta Starter 1) Dc Generator Make - Crompton / Bharat Ele. Motor/ Kirloskar / Electronech / Power Way Systems 2) 3- Phase Induction Motor Make - 1. Crompton 2. Siemens,3. Hindustan Electric Motor. 3) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Motor-Generator (Ac To Dc) Consisting Of : Squirrel Cage Induction Motor With Star Delta Starter And Directly Coupled To Dc Shunt Generator And Switch Board Mounted With Regulator, Air Breaker, Ammeter, Voltmeter, Knife Blade Switches And Fuses, Set Complete With Case Iron And Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Induction Motor Rating ;- 7.5 Hp, 415V, 50 Cycles, 3Phase Dc Shunt Generator Rating ;- 5Kw,440V (Output Voltage Varies 110-440V) 1) Dc Generator Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /Abb /Siemens 2) 3- Phase Induction Motor Make - 1. Crompton 2. Siemens,3. Hindustan Electric Motor. 3) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Dc Series Motor Coupled With Control Panel Including Spring Balance Load 2.5 Kw; 220Volts 1) Dc Series Motor Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /Abb /Siemens 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Dc Shunt Motor Control Panel Including Spring Balance Load 2.5 Kw; 220Volts 1) Dc Series Motor Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /Abb /Siemens 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Dc Compound Motor With Control Panel Including Spring Balance Load, Starter And Switch- 2.5 Kw, 220Volts 1) Dc Compound Motor Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /Abb /Siemens 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Motor Generator(Dc To Ac) Set Consisting Of - Shunt Motor With Starting Compensator And Switch Directly Coupled To Ac Generator With Exciter And Switch Board Mounted With Regulator, Breaker, Ammeter, Voltmeter Frequency Meter, Knife Blade Switch And Fuses Etc. Set Complete With Cast Iron Bed Plate, Fixing Bolts, Foundation Bolts And Flexible Coupling. Shunt Motor Rating: - 5Hp, 440V, A.C., Generator Rating: - 3-Phase, 4-Wire, 3 Kva, 400/230 Volts, 0.8Pf, 50Cycles. 1) Dc Shunt Motor Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar /Abb /Siemens 2) A. C. Generator Make - 1. Kirloskar 2. Crompton, 3. Siemens / Abb 3) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Ac Squirrel Cage Motor With Star Delta Starter And Triple Pole Iron Clad Switch Fuse With Mechanical Loa,5 Hp,3-Phase ,415 Volts, 50 Hz 1) Ac Squirrel Cage Motor Make - 1. Crompton, 2. Siemens, 3. Hindustan Elec. Motor /Abb / Siemens / Bbl 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Ac Phase-Wound Slip Ring Motor With Control Panel ,Starter And Switch 5 Hp, 440 V, 3-Phase, 50 Hz 1) Ac Phase-Wound Slip Ring Motor Make - 1. Crompton, 2. Siemens, 3. Havells Motor /Abb / Simens / Bbl 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard , Universal Motor With Control Panel, Starter/Switch 240 Volt, 50 Hz, 1 Hp 1) Universal Motor Make - 1. Crompton Greaves, 2. Hindustan Motor /Agni Motors / Integrated Elect Construction Of 3. Siemens / Bosch Power Tool 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Synchronous Motor With Control Panel Accessories. Like Starter, Excitation Arrangements,-3 Phase, 3 Hp, 440V, 50Hz, 4 Pole, 1) Synchronous Motor Make - 1. Kirloskar, 2. Crompton, 3. Siemens / Abb 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Thyristor /Igbt Controlled D.C. Motor Drive With Tacho-Generator Feedback Arrangement 1 Hp (Complete Set) 1)Thyristor /Igbt Controlled D.C. Motor Drive Make - 1. Crompton Greaves 2. Siemens, 3. Electro Plasto Control (Epc) /Abb / Siemens 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Thyristor / Igbt Controlled A.C. Motor Drive With Vvvf Control 3 Phase, 2 Hp (Complete Set) 1) Thyristor /Igbt Controlled A .C. Motor Drive Make - 1. Crompton Greaves 2. Siemens, 3. Electro Plasto Control (Epc) /Abb /Siemens 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Single Phase Transformer, Core Type, Air Cooled, 1 Kva , 240/415 V, 50 Hz Make - 1. Siemens India 2. Kirloskar Electric Company Ltd 3. Bharat Heavy Electrical / Technovision Energy /Servokon /Sahara , Three Phase Transformer, Shell Type, Oil Cooled With Delta / Star 3 Kva , 415/240 V, 50 Hz Make - 1. Siemens India 2. Kirloskar Electric Company Ltd 3. Bharat Heavy Electrical / Servocon / Kay Pee , Electrical Machine Trainer - Suitable For Demonstrating The Construction And Functioning Of Different Types Of Dc Machines And Ac Machines (Single Phase And Three Phase). Should Be Fitted With Friction Brake Arrangement, Dynamo Meter, Instrument Panel And Power Supply Unit. 1) Dc Machines And Ac Machines Make - 1. Crompton 2. Kirloskar, 3. Siemens / Kitek Technology /Anshuman Tech 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Diesel Generator Set With Change Over Switch, Over Current Breaker And Water/ Air-Cooled With Armature, Star-Delta Connections Ac 3 Phase, 7.5 Kva, 415 Volt Or Higher Rating Make - 1. Kirloskar 2. Cummins 3. Mahindra Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Pillar Electric Drill Machine Motorized 12-20Mm. Capacity, 1 Hp,440V,3 Phase, Induction Motor With Dol Starter, Bench Type 1) Electric Motor -1. Crompton 2. Kirloskar 3. Siemens 2) Drill Machine Piller - 1. Prakash Engitech Pvt. Ltd. 2. Sri Vigneshwara Machine Tools. 3. Yogi Machine Tools / Itco Engg/ Liberty Metal /Jeet Machine , A.C. Series Type Motor With Control Panel 1 Hp, 240 V, 50 Hz 1) A.C. Series Type Motor Make - 1. Crompton 2. Kirloskar,3. Siemens /Abb / 2) Control Panel- Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Single Phase Capacitor Motor With Control Panel , Starter Switch 1 Hp 240 Volt 50 Hz 1) Single Phase Capacitor Motor Make - 1. Crompton Greaves 2. Hindustan Motors 3. Siemens Motors / Kirloskar 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Manual Motor Coil Winding Machine - With Step Arbour Make - 1. Chawla And Chudhari Trading Co. Pvt 2. Bgi Tools And Machine 3. Shree Esha Winding Technology / Sigva / Signatt / Heaven , Ceiling Fan Coil Winding Machine - 250V,50Hz, 1- Phase With Speed Control Make - 1. Bharat Machine Tools Ind. 2. Nishan Electric 3. Jangir Engineering Work / Kisan Engg / Nilkanth Electric , Primary Current Injection Set 220V,50Hz, 1-Phase,Output Current-200A(Min) With Timer Make - 1. Sb Electro Tech. 2. Pragati Process Controls, 3. Scope T&M Pvt / Udeytaj Electric / Motwane /Kpm Engg , Stepper Motor With Digital Controller Make - 1. Ajanta Export Industries. 2. Anubhuti Power System 3. Bombay Electronics 4. Siemens 5. Schneider Elect 6. Abb , Shaded Pole Motor Fractional Hp, With Control Panel 240V 50Hz 1) Shaded Pole Motor Make - 1. Crompton Greaves 2. Hindustan Motors 3. Siemens Motors / Rexnord 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , D.C. Compound Generator With Control Panel Including Fitted Rheostat, Voltmeter, Ammeter & Breaker, 2.5 Kw, 220 V & 3 Phase Squirrel Cage Induction Motor 5 Hp, 440 V With Control Panel & Star Delta Starter. Make - Dc Compound Generator Make - 1. Crompton, 2. Bharat Ele. Motor, 3. Kirloskar / Powerol 3- Phase 1) Induction Motor Make - 1. Crompton 2. Umiya Trading Company 3. Envirotech Engineers 2) Control Panel - Control Panel Accessories, Equipment And Protecting Accessories As Per Isi Standard. , Used D.C. Generator Series, Shunt & Compound Type For Overhauling Practice. Make - 1. Crompton, 2. Bharat Ele. Motor 3. Kirloskar , Smart Meter 1- Phase - Smart Energy Meter 3 - Phase - Smart Energy Meter Make - 1.Genus Power Infrastructures Ltd 2.Hpl Electric & Power 3.Elmax India / L&T Electric , Ev Charger 3 - Phase Input Make - 1. Tata Power 2. Mahindra Electric 3. Okaya / Delta Electronic / Servotech Power System , Ev Charger (Home) 1 - Phase Input Make - 1. Tata Power 2. Mahindra Electric 3. Okaya / Delta Electronics , Work Shop Main Control Panel With Voltmeter Indicator Ammeter Indicator 1. Maintenance 125 A 440V 2. Output Main Switch - 16A - 08 , 32A - 08 63A - 02 Make - 1. Schneider Elect 2. Siemens 3.Abb 4. L& T , D C Control Panel Income - 440V Ac Output -12V ,24,110V, 240V, 440V, Dc With Indicator Voltammeter Ampire Meter Make - 1. Schneider Elect 2. Siemens 3.Abb 4. L& T , Welding Transformer With All Accessories ( 400A, Ocv 60-100 V, 60% Duty Cycle) Make - Miller / Ador / Esab / I Bell , Welding Transformer (Or) Inverter Based Welding Machine With All Accessories (300A , Ocv 60 - 100 V, 60% Duty Cycle) Miller / Ador / Esab / I Bell , D.C Annual Rate Contract Welding Rectifiers Set With All Accessories (400 A. Ocv 60 - 100 V, 60% Duty Cycle ) Make - Miller / Ador / Esab / Vigor , Gmaw Welding Machine 400A Capacity With Air Cooled Torch, Regulator, Gas Preheater, Gas Hose And Standard Accessories Miller / Ador /Esab / Kemppi , Ac/Dc Gtaw Welding Machine With Water Cooled Torch 300 A, Argon Regulator, Gas Hose, Water Circulating System And Standard Accessories. Miller /Ador / Esab / I Bell / Lincoln , Air Plasma Cutting Equipment With All Accessories, Capacity To Cut 12 Mm Clear Cut Make -Miller / Esab / Hypertherm / Rali Wolf / Technocard Plasma , Air Compressor Suitable For Above Air Plasma Cutting 15 Kw System Two Stage Compressor. 225 Ltr. Auto Cut Tank Cap. 80 -100 Psi Make -Elgi /Allas Capco / Ingersoll Rand / Premier , Auto Darkening Welding Helmet Make -L&T / Bell / Esab / Miller , Spot Welding Machine To 15 Kva With All Accessories Make - Ador / Esab/Artech / Micro Weld , Portable Gas Cutting Machine Capable Of Cutting Straight & Circular With All Accessories Make - Esab/ Pug Nm / Koike India /Ador / Pentagon , Pedestal Grinder Fitted With Coarse & Medium Grain Size Grinding & Wheel Dia-300Mm. Make -Elmaco / Bosch / Vijay Foundry Equipment , Bench Grinder Fitted With Grain Size Silicon Carbide Green Grinding Wheel Dia 150Mm Make - Elmaco / Bosch / Dewalt / Stanley Corded , Power Saw Machine 18 Hp-300 Blade Size - 450 Mm Make -Bosch / Dewalt / Hitachi / Kmi / Atlas Mochal , Portable Drilling Machine Capacity 6Mm. Make - Bosch / Dewal/ Hitachi , Oven Electrode Drying 0To 350C 10Kg Capacity Make - Ador /Arcon /Senso Heat , Die Penetrating Testing Kit. (Machine) Make - Esab / Dubi-Chek / Aerol / Magnaflux , Magnetic Particle Testing Kit. Make -Esab / Canmay /Mag Flux / Magnaflux / Magkraft , Wedding Simulators For Smaw,Gtaw,Gman (Optional) Make - Krb Electronic Soln Rewabsi / Simbott , Water Cooled Induction Welding/ Brazing Machine 200-250 Amp., Induction Coil Length 3 Inch And 2.5 Inch Make - Esab /Micro Tech Induction /Foster Induction /Vel I Braze Snapet / Welding World , Plastic Welding Machine With Hot Air Gun Temp. Display, Variable Temp., Pe, Pp& Pvc Sheet Or Pipe Welding Control With Stand. Accessories. Make - Esab / Leister / New Vimco Ltd /Ajanta Ultra Plast / I Bell / Vormik Vr/Branson Ultrascnies , Ag4 Grinder 100 Mm Dia Make - Dewalt / Bosch /Jk Supper / Metabo , Portable Abrasive Cut Off Machine 107 Mm Dia Make - Dewalt / Bosch / Ingco Hikoki /Mangalam / Century / Emboro , Hand Shearing Machine Cp Cut 6 Mm Sheet & Flat Make - Shakti / Vmt/ M.S. Machine Tools/Tl Pathak Group , Laser Cutting Machine Portable 50 Mm Laser Make - Esab / Toumf / Amada / Parag Weld Algo Laser/ Auto Mstack/Crealrty , Lathe S.S. & S.C. (All Geared Head Stock) With Minimum Specification As: 150Mm Centre Height To Admit 750Mm Between Centres, Machine To Be Motorized And Supplied With Coolant Installation, 4-Jaw Independent Chuck 150Mm., 3-Jaw Self-Cantering Chuck 150Mm. Fixed Steady, Travelling Study, Face Plate, Driving Plate, 4 Way Tool Post, Quick Change Gear Box For Metric Or British Threads, Live And Dead Centre With Taper Turning Attachment Motor Capacity 5.5 Kw. Mt 2 Revolving Centre Qty.2 No. Make - Kirloskar /Hmt/ S Micrometric , Lathe Tool Room S.S. & S.C. . . . (All Geared Head Stock) With Minimum Specification As : 150Mm Center Height, 1000Mm Between Centers, Machine To Be Motorized And Supplied With Coolant Installation, 4-Jaw Independent Chuck 250Mm.,3-Jaw Self-Cantering Chuck 150Mm. Fixed Steady, Traveling Steady, Face Plate, Driving Plate 1-Way Tool Post, Draw In Type Collets Set Up To 25 Mm, 0.5 Mm Relieving Attachment Motor Capacity 5.5 Kw. Mt 2 Revolving Centre Qty.2 No. Make - Kirloskar / Hmt / S Micrometric , Grinding Machine Pedestal Type D.E.200Mm. Dia. Wheel With Wheel Guard And Vision, Motor Capacity - 0.75 Kw. Make - Elmaco / Bosch / Ingco , Cnc Lathe/Cnc Turn Centre Make - Bfw / Moriseiki / Makino , 1) Machine Capacity A. Swing Over Bed - 350 Mm Or Higher B. Turning Diameter - 135 Mm Or Higher C. Distance Between Centers - 250 Mm Or Higher D. Maximum Turning Length - 200 Mm Or Higher E. Slant Angle (Bed Or Saddle) -30 Degrees To Horizontal Or Higher F. Cast Iron Grade For Bed And Saddle - Grade 25 Or Equivalent G. Machine Weight Net - 1500 Kg Or Higher , 2) Spindle A. Spindle Nose -A2-4 / A2-5 B. Bore Through Spindle - 35Mm Or Higher C. Maximum Spindle Speed - 4000 Rpm Or Higher D. Spindle Power, Continuous - 3.7 Kw Or Higher E. Minimum Spindle Speed @ Full Power - 1200 Rpm, Or Lower F. Type Of Drive - Ac Servo Spindle Motor (Digital) G. Chuck Size -135 Mm Or Higher. Chuck Type H.3-Jaw Hydraulic, Hydraulic Power Operated I. Spindle Bearing Class - P4 Class J. Front Bearing Dia. (Id) - 60 Mm Or Higher , 3) Axes A. X - Axis Travel - 100 Mm Or Higher B. Z - Axis Travel -200 Mm Or Higher C. Programmable Feed Rate- X & Z -10 - 10000 Mm/Min D. Minimum Programmable Command -X & Z - 0.001 Mm E. Rapid Traverse - X & Z - 20 M/Min Or Higher F. Type Of Drive - X & Z - Ac Servo Motor G. Motor Torque - Z Axis - 3Nm Or Higher H. Motor Torque - X Axis - 3Nm Or Higher With Brake I. Ball Screw - Z & X Axes (Diameter X Pitch) - 25 X 10 Mm Or Higher J. Ball Screw Finish - Z & X Axes - Hardened And Ground K. Ball Screw Class- Z & X Axes - Pre-Loaded With C3 Or Better L. Guide Way Type - Z & X Axes - Antifriction Linear Motion Guide Way M. Guide Way Size - Z & X Axes - 25Mm Or Higher N. Guide Way Precision - Z & X Axes - P Class , 4) Turret A. Bi-Directional Tool Turret - Electromechanical/Servo/Hydraulic B. No. Of Tools - 8 Nos. Or Higher C. Tool Shank Size - 20 X 20 Mm Or Higher D. Maximum Boring Bar Diameter - 25 Mm Or Higher , 5) Tail Stock A. Quill Diameter - 65 Mm Or Higher B. Quill Stroke - 70 Mm Or Higher C. Quill Taper- Mt-4 Or Higher D. Quill Actuation - Hydraulic E. Tail Stock Base Travel Manual - 150 Mm Or Higher F. Thrust (Adjustable) - 300 Kg For Higher , 6) Coolant/Lubrication/Hydraulic A. Coolant Tank Capacity - 100 Liters Or Higher B. Coolant Pump Motor - 0.37 Kw C. Coolant Pump Out Put - 20 Lpm Or Higher D. Lubrication Type - Automatic Centralized Lubrication E. Lubrication Tank Capacity 3 Liter Or Higher F. Hydraulic Pump Discharge - 8 Lpm Or Higher G. Hydraulic Tank Capacity - 30 Liters Or Higher H. Hydraulic System Pressure Maximum -30 Bar Or Higher , 7) Accuracy As Per Iso 230-2 A. Positioning Accuracy X & Z Axes - 0.012Mm B. Repeatability X & Z Axes - ± 0.007Mm C. Geometrical Alignment - Iso 13041-Part 1 D. Accuracy Of Finish Test Piece - Iso 13041-Part 6 , 8) Cnc System A. Control System - Fanuc / Siemens B. System Resolution - 0.001 Mm C. Motors & Drives - Compatible With Cnc Controllers Mentioned Above D. Tool Number Display - On Machine Operator Panel E. Machine Control Panel - Feed Rate, Spindle Speed Override Knob F. Mpg (Manual Pulse Generator) - On Machine Operator Panel G. Cnc Features - Graphic Simulation, Programming Help, Tool Offsets, Mdi, Absolute/ Incremental Positioning, Pitch Error Compensation , 9) Power Source A. Mains Supply (± 10 %) - 415 V, 3 Ph., 50Hz B. Total Connected Load Requirement - Approx. 15 Kva , 10) Standard Equipment A. Voltage Stabilizer 15 Kva B. Air Conditioning Unit For Electrical Cabinet - 1 No. Backup Cd For Plc Ladder Logic - 1 No. D. Machine Lighting - 1 No. E. Levelling Pads And Jacking Screws - 4 No. F. Operation Manual - 1 No. G. Maintenance Manual - 1 No. H. Installation Kit - 1 No. I. Maintenance Tool Kit - 1 No. J. 6 Rack Trolley (Size 25X22X45) With Lock - 1 No. K. Machine Guarding With Safety Compliance - 1 No. , 11) Makes Of Critical Machine Tool Components A. Linear Motion Guide Ways - Hiwin/Thk/Pmi/Star B. Ball Screws - Hiwin/Thk/Tsubaki/Pmi/Star/Hmt/Nsk C. Spindle Bearings - Rhp/Nsk/Fag/Skf/Nrb D. Turret - Pragati/Baruffaldi/Sauter/Duplomatic E. Hydraulic Chuck & Cylinder - Gmt/ Kitagawa / Airtech /Pragati / Rohm F. Hydraulic Power Pack - Yuken/Fluid/Rexroth G. Panel Ac - Werner Finley/Rittal/Lextecnoid H. Stabilizer - Neel/Servomax /Consul/Farmax/Equivalent I. Lubrication- Cenlube/Dropco/Equivalent J. Coolant Pump - Rajamane/Grundfos K. Cutting Tools And Holders - Sandvik/Taegutec/ Kennametal /Seco/Iscar/Mitsub Ishi , 12) Cutting Tools & Tool Holders 1. External Turning Holder, Insert Type, Mwlnl - Holder 4Qty. (Insert Wnmg 40 Nos.) 2. External Turning Holder, Insert Type, Mvjnl - Holder 4Qty. (Insert Vnmg 20 Nos.) 3. External Turning Holder, Insert Type, Pdjnr - Holder 4Qty. (Insert Dnmg 20 Nos.) 4. Threading Holder - External, Lh - Holder 4Qty. (Insert 0.5 To 2 30 Nos.) 5. Threading Holder - Internal, Lh - Holder 4Qty. (Insert 0.5 To 2 30 Nos.) 6. Grooving Holder External, Lh - Holder 4Qty. (Insert 3Mm 30 Nos.) 7. Grooving Holder Internal, Lh - Holder 4Qty. (Insert 3Mm 30 Nos.) 8. Parting Off Holder For Insert Width 2 Mm, Lh - Holder 4Qty. (Insert 2Mm 30 Nos.) 9. Boring Holder Sclcl For Minimum Bore Dia. 12Mm - Holder 4Qty. (Insert Wcmt 60 Nos.) 10. Boring Holder Sclcl For Minimum Bore Dia. 16 Mm - Holder 4Qty. (Insert Ccmt 60 Nos.) 11. Internal Grooving Holder Lh, For Minimum Bore Dia. 12 Mm - Holder 4Qty. (Insert 2Mm 30 Nos.) 12. Internal Threading Holder Lh, For Minimum Bore Dia. 12 Mm - Holder 4Qty. (Insert W Mm 30 Nos.) 13. Insert Drill 12.7 Mm - Holder 4Qty. (Insert Suitable 30 Sets.) 14. Reducing Sleeves For Internal Holders - Dia 12 And 16 Mm - 2 Sets 15. Centre Drill Hss A 2.5 X 6.3 - 6 Qty. 16. Twist Drill Hss Straight Shank, Dia 6,8,10,12 Mm - 6 Sets 17. Collets Suitable For The Above Drills - 2 Sets 18. Collet Holder - 4 Nos. 19. Boring Bar Holder - 3 Nos C.N.C Lathe Machine With Accessories. 1. D- List Of Additional Machines, Tools And Equipment For Cnc Turn Center : D) Digimatic Electronic Vernier Caliper 200 Mm. - 2 Nos. E) Digimatic Electronic Outside Micro Meter (0 To 25 Mm & 25 To 50 Mm) Lc 0.001 Mm. - 1 Nos Each. , Desktop Computers Compatible To Run Simulation Software With Lan Facility. Dell / Lenovo / Hp Specification - Cpu - 64 Bit I7 Or Latest Processor Speed - 3Ghz Or Higher Ram 12 Gb Ddr - Iii Or Higher, Wi-Fi Enabled. Network Card - Integrated Gigabit Ethernet, With Usb Mouse, Usb Keyboard And Monitor (Min. 21 Inch.) Licensed Operating System And Antivirus Compatible With Trade Related Software. 01 Tb Hard Disk Nvidia Graphic Card , Ss And Sc Centre Lathe (All Geared) With Minimum Specification As: Centre Height 150 Mm And Centre Distance 750Mm Along With 4 Jaw Chuck, Self-Centering Chuck, Auto Feed System, Safety Guard, Motorized Coolant System And Lighting Arrangement, Set Of Lathe Tools, Lathe Carriers Make - Kirloskar /Hmt/ S Micrometric , Pillar Drill Machine (All Geared) 0-25Mm Drill Holding Capacity With Drill Chuck & Keys. Make - Ifco/ Skp / Energi , Cylindrical External Grinding Machine Fully Motorized With Dressing Arrangement And Supplied With Face Plates And Driving Dogs, 3 Jaw Self-Centering Chuck,4 Jaw Independent Chuck, Tail Stock Assorted Center Pump With Tank And Pipe Fittings Spanners And Grease Gun (Each Machine To Be Supplied With Assorted Grinding Machine For General Purpose Work With Internal Grinding Attachment) With Minimum Specification As: To Accommodate 750Mm Job With Center Height 150Mm. Wheel Diameter X Width=300X25Mm Make - Hmt-K 130 U / S-Micrometic / Hi Life , Radial Drilling Machine 32Mm Diameter With Std. Accessories. Drill Chuck & Plain Machine Vice 250 Mm Make - Hmt / Bfw / Batliboi , Lathe Tool Room S.S. & S.C. . . . (All Geared Head Stock) With Minimum Specification As : 150Mm Center Height, 1000Mm Long With 3-Jaw, 4-Jaw Chuck Auto Feed System, Taper Turning Attachment, Coolant Pump, Safety Guard, And Machine Light Arrangement. Make - Kirloskar / Hmt / S Micrometric , Rockwell Hardness Testing Machine Digital Type With Standard Accessories / Digital Type Make - Mitutoyo/ Sagar/ Sinowon / Saroj / Sai Dro , Profile Projector (5 Micron) Re Solution 0.001Mm Projection Scream - Effective Diameter 300 Mm, Rotation Angle: +/- 360 Degree Angle Reading - 0.01 Degree Or 1 (Commutative) Projection Lens - 10 X Lens Group (Standard Arrangement) 20X50X100 X Is Set As On Option. Measuring Range - 200X200 Mm Quickly Move X, Y Axes, Power : 220 Vac Make - Mitutoyo / Nicon / Metzer , Co-Ordinate Measuring Machine (5 Micron) Measuring Range 500X700X500Mm Make - Nicon / Mitutoyo / Devine Technology , Fly Press (Any Model Minimum 12 Tons Capacity) Make - Taj Enterprises / Bharat Machinery And Spares / Orient Machine Tool , Power Press M/C (Hydraulic) Minimum 02 Tons Capacity Standard And Required Optional Accessories Make - Foreman / Amino / Omkar Enterprises , Auto Cad & Cam Latest Version - For Training Purpose Make - Autodesk , Solid Works / Any Latest - Latest Version - For Training Purpose Make - Dassasult System Solid Work Corporation , Smart Touch Screen Panel For Smart Class Room (65) Usb Connector, Led Interactive Pen, Mounting, Users Manual Electronics File Make - Samsung / Smart Guru / Vincon System , Multimedia Based Simulator For Cnc Technology & Interactive Cnc Part Programming Software For Turning & Milling With Virtual Machine. Operation & Simulation Using Popular Operation. Control System Such As Fanuc, Siemens, Etc. (Web-Based Or Licensed Based.) - For Training Purpose Make - Cad Mech / Indiasoft / Fanuc / Krb Electronic Solution , Cnc Vertical Machining Centre With Std. Accessories Make - Bfw / Moriseiki / Makino Specification , 1) Machine Capacity A)Table Size - 500X250 Or Higher Mm B) Max. Load On Table 150 Or Higher C)T Slot Dimension (N X W X P) Mm 3X14X100 Or Higher D)Table Height From Floor 800 ~ 900 Mm E) Cast Iron Grade For Bed And Saddle Grade 25 Or Equivalent F)Machine Net Weight 1500 Or Higher Kg , 2) Spindle A) Spindle Nose Bt30 B) Minimum Distance (Spindle Nose To Table)100 - 150 Mm D) Maximum Spindle Speed 6000 Or Higher Rpm E) Spindle Power, Continuous 3.7 Or Higher Kw F) Type Of Drive Ac Servo Spindle Motor (Digital) G) Spindle Bearing Class P4 H) Front Bearing Dia. (Id) 50 Or Higher Mm , 3) Axes A) X - Axis Travel 300 Or Higher Mm B) Y - Axis Travel 250 Or Higher Mm C) Z - Axis Travel 250 Or Higher Mm D) Rapid Traverse - X/Y/Z 20/20/20 Or Higher M/Min E) Minimum Programmable Command X/Y/ Z - 0.001 Mm F) Programmable Feed Range - X, Y & Z Axes 10 - 10000 Mm/Min G) Type Of Drive Ac Servo Motor H) Motor Torque - X & Y Axes 3 Or Higher Nm I) Motor Torque - Z Axis 6 Or Higher With Brake Nm J) Ball Screw - X,Y& Z Axes (Diameter X Pitch) 25 X 10 Or Higher Mm K) Ball Screw Finish - X, Y & Z Axes Ground And Hardened L) Ball Screw Class - X, Y & Z Axes Pre-Loaded With C3 Or Better M) Guide Ways - X, Y & Z Axes Antifriction Linear Motion Guide Way N) Guide Ways Size - X, Y & Z Axes 25 Or Higher Mm O) Guide Way Precision - X, Y, & Z Axes P Class , 4) Automatic Tool Changer A) Number Of Tool Pockets 8 Or Higher Nos B) Max Tool Diameter 80 Or Higher Mm C) Tool Selection Bi-Directional D) Tool Shank Type Bt30 E) Tool Weight Max 2.5 For Bt30 F) Tool Length Max 100 ~150 For Bt30 G) Tool Change Time (Chip To Chip) 5 Or Lower Sec H) Tool Clamp & Unclamp Disc Spring & Hydro-Pneumatic , 5) Accuracy As Per Iso 230-2 A) Positioning Accuracy For X,Y & Z Axes 0.012 Mm B) Repeatability For X,Y & Z Axes ±0.007 Mm C) Geometrical Alignment Iso 10791-Part 1 D) Accuracy Of Finish Test Piece Iso 10791-Part 7 , 6) Cnc System A) Control System - Fanuc B) Motors & Drives Compatible With Cnc Controllers As Mentioned Above C) System Resolution 0.001 Mm D) Tool Number Display On Machine Operator Panel E) Machine Control Panel Feed Rate, Spindle Speed Override Knob F) Mpg (Manual Pulse Generator) On Machine Operator Panel G) Cnc Features Graphic Simulation, Programming Help, Tool Offsets Mdi, Absolute/Incremental Positioning, Pitch Error Compensation , 7) Coolant/Lubrication A) Coolant Tank Capacity 100 Or Higher Litres B) Coolant Pump Motor 0.37 Kw C) Coolant Pump Output 20 Or Higher L Pm D) Lubrication Type Automatic Centralized Lubrication E) Lubrication Tank Capacity 3 Or Higher Liters , 8) Air Compressor For Tool Unclamp A) Compressor Type Screw Type With Dryer, Filter & Air Receiver B) Tank Capacity 200 Or Higher Liters C) Air Flow 10 Or Higher Cfm D) Pressure 7 Max. Bar , 9) Power Source A) Mains Supply (± 10 %) 415 V, 3 Ph., 50Hz B) Total Connected Load Requirement Approx. 15 Kva , 10) Standard Equipment A) Voltage Stabilizer 15 Kva B) Air Conditioning Unit For Electrical Cabinet As Required C) Backup Cd For Plc Ladder Logic 1 No. D) Machine Lightning 1 No. E) Levelling Pads And Jacking Screws 4 Nos. F) Operation Manual 1 No. G) Maintenance Manual 1 No. H) Installation Kit 1 No. I) Maintenance Tool Kit 1 No. J) 6 Rack Tool Trolley (Size 25X22X45) With Lock 1 No. H) Machine Guarding With Safety Compliance 1 No. , 11) Makes Of Critical Components A) Lm Guide Ways - Hiwin/Thk/Pmi/Star B) Ball Screws - Hiwin/Thk/Tsubaki/Pmi/Star/Hmt/Nsk C) Spindle Bearings - Rhp/Nsk/Fag/Skf/Nrb D) Atc - Pragati/Gifu E) Panel Ac - Werner Finley/Rittal/Lextecnoid F) Stabilizer - Neel/Se Rvomax/Consul/Farmax G) Lubrication - Cenlube/Dropco H) Coolant Pump - Rajamane/Gru Ndfos I) Cutting Tools And Holders - Sandvik/Taegutec/Ken Nametal/Seco/Mitsubishi J) Air Compressor (Capacity: 6 Kg/Cm2 - 300 Godrej/Elgi/Kaeser/Atlascopco L Pm Min.) , 12) Cutting Tools & Tool Holders (For Bt30 As Per Machine Supplied) A. Face Mill 45 Degree 63 Mm. Insert Type - 4 No. Suitable Inserts - 15 No. B. Face Mill Square Shoulder 50 Mm. Insert Type - 4No. Suitable Inserts - 15 No. C. Twist Drill Hss Straight Shank 6, 6.7, 8.5, 9.7 - 4 No. D. Spot Drill Carbide, Dia. 8 Mm X 90° - 4 No. Suitable Inserts - 60 No. E. Drill Insert Type - 16 Mm - 4 No. Suitable Inserts - 30 No. F. Solid Carbide Twist Drill Straight Shank - 8 Mm - 4 No. G. Solid Carbide End Mill Straight Shank - 10, 12 Mm Dia. - 4 No. H. End Mill Insert Type Straight Shank - 16 Mm Dia. - 4 No. Suitable Inserts - 30 No. I. Machine Taps Hss - M8, M10 - 4 No. J. Solid Carbide Reamer Straight Shank - 10 Mm - 4 No. K. Finish Boring Bar Dia. 20 To 25 Mm- 3 No. Suitable Inserts - 30 No L. Holder For Face Mills (Adapter) - 4 No. Suitable Incert - 60 Nos. M. Collets For Above Drills, Reamers, End Mills - 02 Sets N. Collet Holder Suitable For Collets - 4 No. O. Side Lock Holder For 16 Mm Insert Drill - 2 No. P. Machine Vice 0-150 Mm Range - Mechanical Type - 1 No. Q. C Spanner For Tightening Tools In Holder - 2 No. R. Magnetic Dial Stand - 2 No. S. Mallet - 02 No. T. Tap Wrench - 2 No. U. Hands Tools Set ( Spanners, Allen Keys, Etc.,) - 1 Box V. T Nuts, Strap Clamps, Clamping Nuts And Studs - 2 Set , Three / Four Door Refrigerator (Inverter Type) Specification - 300 Liter With Hc-600 A Gas. (1 Each) Make - Godrej / Whirlpool / Lg , Core Drill Machine Specification - Up To 2 To 2.5 Hammer Chiseling Bit 1500 Watt Make - Crompton / Power Hours / Bosch , Duct Able Split A/C Reciprocating Compressor Specification - Cap 1.5 Ton With R-22 Evapora(4 Copper) Make - Blue Star / Voltas / Daikin , Recovery Unit With Cylinders Specification - Cfc-Hfc,Hcfc, - 1 Each Cylinders Make - Trust Hal / Robin Air Rg-3 / Rishabh Enterprises , Decibel Meter 03 To 100 Db Make - Cadrim / Bosch / Generc , Descaling Pump Set With Stainless Steel Impeller And Accessories (1/2 Hp) Make - Bosch / Crompton / Robin Air , Fan Coil Unit With Water Valves Specification - 2 Way & 3 Way Valves (02 Ton) Make - Nutech Zeco / Blue Star / Voltas , Circulating Water Pump 0.5 Hp With Stainless Steel, Tank Capacity Inlet/Outlet Provision Make - Sharp / Lubi / Crompton , Water Cooler Storage Type Hfc-134A Specification - 200 Litter Reciprocating Compressor. Make - Blue Star /Voltas / Usha , Package A/C Air Cooled Type With Open Type Reciprocating Compressor Fins Type Condenser (05 Ton) Make - Blue Star / Voltas / Daikin , Bus A/C Tutorial Model Make - Estern Air / Tata Motors / Cool Ways. Ltd , Automatic Ice Coober Machine Specification - 5 Kg/Hr., Ice Cube - Material Stainless Steel Make - Godrej / Voltas / Blue Star , Walk In Cooler Puf Insulated Cold Room Specification - 01 Ton, 6X5X8 Foot, Cold Room Temp - 0 To 5° C Degree. Air Cooled Evaporator & Condenser Copper Tubing. Make - Unicool / Blue Star / Voltas , Shell Tube Type Dx Chiller Specification - 5 Ton Material - Copper Tubing Only Make - Voltas / Blue Star / Carrier
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Trust & NGO No of Bidders 3
Maharashtra View Result →
10.
Public Administrative Department #10806936 Price Bid
Supply Of Machinery/Tools For Various Parks At Sarita Vihar In Ward No. 187, Central Zone , Brush Cutter Engine: Single Cylinder, 2 Stroke, Aircooled Only Engine Displacement: 40.2Cc Power Output: 2Kw/2.7Hp Max Output Shaft Speed At Cutting Attachment: Should Be Minimum 9000 Rpm Carburetor: Diaphragm With Compensator Technology. Fuel Tank Capacity: Minimum 600 Ml. Weight( Dry,Without Cutting Attachment & Deflector): Should Not Be More Than 7.5 Kg Clutch: Centrifugal Type, Clutch Shoe Support Base & Liningmetal Only. Multi Function Handle: Should Have Acceleration ,On/Off Switch At Right Handle. Brushcutter Harness: Should Be Double Shoulder Harness Only. Anti Vibration System: Must Have 4- Point Aniti Vibration System. Vibration Level In M/S2 At Right Handle : Should Not Be More Than 2.5 M/S2 Sound Pressure Level Db(A): Should Not Be More Than 105 Db(A) Drive Shaft Design: Must Have Drive Shaft Ends Square Design Type Only. Certification : Must Have Valid En Certificaton , Petrol Operated Chain Saw Engine : Single Cylinder, 2 Stroke, Aircooled Only Displacement: 45.4Cc Power Output : 2.3Kw. 3.0 Hp Max.Engine Speed (With Guide Bar & Chain ): At Least 12500 Rpm Carburetor: Diaphragm Type & Compensator Technology. Fuel Tank Capacity: Should Be Minimum 450 Ml. Dry Weight( Without Cutting Attachment ): Should Not Be More Than 5.0 Kg Clutch: Clutch Shoe Linining Metal Only. Guide Bar Design: Should Be Rollomatic Type. Guide Bar Length: Guide Bar Length Must Have 50 Cm/20 Inch. Guide Bar And Chain: Should Have Same Manufacture Only. Chain Type: Every Drive Link Require Groove & Small Oil Receiver Hole For Better Lubrication. 0.325 Inch Pitch & 1.6 Mm Thickness Only. Chain Lubrication System: Fully Automatic ,Speed Controlled Rotary Oil Pump Chain Oil Tank Capacity: Should Be Minimum 200 Ml. Oil Pump Drive: Should Have Direct Drive From Crankshaft & Oil Pump Flow Adjustable. Master Lever Control: Must Have All Operation In One Hand, Chock,Throttle, Acceleration,Switch Off. Guaranteed Sound Power Level: Should Not Be More Than115 Db(A) Maximum Chain Velocity To Iso 11681: Should Be Minimum 28 M/S Certification: Productshouldhave Valid Dplf Certificate With Test Standard En Iso 11681. , Tree Pruner Supply Of Telescopic Pole Pruner:- Specification:- Pole Length Incuding Blade: 6.5M Blade Material: Hardened & Tempered High Carbon Steel .The Head Of The Blade Shall Have A Hooked Tip Useful For Cutting Twigs Saw Blade Shape: Hooked Type Curved Saw Blade Type & No Of Cutting Teeth :Tripple Grounded 86 Teethblade Length : 15-16 Pole Type: Light Weight Telescopic Tubular Aluminium Alloyextendable Poleno Of Positions For Pole Heightadjustment : 10 Positionslocking Mechanism : Ergonomicvally Designed Two Way Locking Mechanism Total Working Length : Max 219(6623 Mm), Min 103 (3103Mm) Branch Cutting Capacity: 200Mm Max , Lawn Mower Supply Of Lawn Mower:- Specification:- Type Of Machine Walk Behind Lawn Mowers Power Source Petrol Engine Start Type Recoil / Pull Start Speed Control Variable Speed Drive Type All Wheel Drive Blade Style Rotary Type Blade Engagement Electromagnetic Cut Width (Mm) 500 To 524 Minimum Cut Height 1 Millimeter Maximum Cut Height 26 Millimeter Blades Metallic Number Of Blades 1 Number Of Positions For Cut - Height Adjustment 2 Number Of Levers For Cut - Height Adjustment Single Lever Number Of Wheels 4 Front Wheel Size 200 Millimeter Rear Wheel Size 200 Millimeter Wheel Tyres Pneumatic If Yes, Grass Catcher / Collector / Bag Volume 88 Liter Engine Power Rating (Watt) 4000 To 4999 Engine Fuel Tank Capacity - 1 Ltr. , Lopper Anvil Tree Branch Lopper Lade Material - High Carbon Steel With Hard Surface Treatment, Overall Length - Not Less Than 914 Mm Handle Material - Similar Materil As Per Requirement, Weight - 1.5 Kg., Cutting Dia - Not Less Than 38Mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Delhi View Result →
11.
Dairy #10774291 Price Bid
Supply Of Bearing Electrical Hardware Machinery Item And General Items Or Spare Parts , Shear Pin (L-90Mm, W-20Mm)- As Per Sample , Die Cover Ring , Nuematic , Press Roll Stay Assembly , Rear Scraper (As Per Sample) , Front Bearing Spacer For T Shaft , Esentric Shaft (125 Dia X 309 Lg) , Counter Pulley (Super Senior) Suitable To Spectom) , Main Scraper Bolt (L70mm X M30mm) Hexa Bolt 48Mm , Full Circular Hammer Mill (Paragon Make) , Beater Holding Bush (Od-30, Id-20, L 11.5M) , Hammer Mill Rod (New) (L-695,Mm, H-19Mm) , Hammer Mill Rod (Old) ( L-558Mm, H-19Mm, Llk Hole-8Mm) , Beater Holder Shaft For Above , Feeder Rotor Assembley Complete , Full Circular Hammer Mill (H S 100) , Main Rotor With Shaft (460Mm Dia X 818Mm Lg) , Main Rotor Shaft (95 Mm Dia X1258 Mm Lg En 8) , Beater Rod (19 Mm Dia X 710 Mm Lg) , Hammer Mill Sleve Sheet (L-1010 Mm X W-640Mm X Thichness-3Mmx Hole-5Mm) , Hammer Mill Sleve Sheet (L-880Mm X W-725Mm X Thichness-3Mmx Hole-5Mm) , Feeder Rotor Assembley Complete , Eccentric Shaft , Center Bolt/Roller Stud (Allen,Bolt,Head Type Design) , Clamping Stay & Side , Bucket Dolly 8Inch (51/4X41/4X14) , Bucket Dolly 10 (6X5x14) , Elevator Belt (10X5 Ply, 3 Mm,Top Rubber 1.5Mm Bottom Rubber) , Elevator Belt (12X4 Ply, 3Mm Top Rubber, 1.5Mm Bottomrubber) , Toper Pully With Shaft (550 Dia X 350 Wide ) , Top Rubbersed Pully With Shaft (500 Dia X 280 Wide ) , Top Rubbersed Pully With Shaft (550 Dia X 350 Wide ) , Raddler Chain (100 Mm Pitch X 235 Mm Wide (Insite And Outsite Link 40 X 5 Mm Thick Along With Bushes And Roller Duly Hardened.) Suitable For 20 Mt/Hr Chain Conveyor With Bulk Density 600 Kg/Cm3 Material) , Wooden Slat , Woodan Slat For Slat Conveyor (Rate Per Piece) , Intake Chain Conveyor Front Shaft(65 Dia X 760 Mm Long) , Intake Chain Conveyor Rear Shaft (65 Dia X 580 Mm Long) , Elevator 8 Top Pully Shaft (52 Dia X 810 Mm Long) , Elevator 8 Bottom Pully Shaft (52 Dia X 525 Mm Long) , Elevator 10 Top Pully Shaft (52 Dia X 865 Mm Long) , Elevator 10 Bottom Pully Shaft (52 Dia X 600 Mm Long) , Distribution Conveyor Shaft(40Dia X 300Mm Long) , Slat Conveyor Shaft (50 Dia X 700 Mm Long) , Molasses Knife-Ss 20 Mm Full Thread With Double Nut And Washer , Molasses Knife-Ss 12 Mm Half Thread With Double Nut And Washer , Ci Solid Helical Gear For Molasses Mixture (250 Pcd With 50Mm Bore Dia (260Mm, Thickness 50Mm, 48 Teath, Keyway 14X4mm) , Tenson Rod (Super Senior Make) , Tenson Rod (Senior Make) , Dumper Rubber , Dumper Complete , Ht Bolt (As Per Sample) All Type , Stiching Machine Needle , Blower For Old Pellet Machine Complete 20 Hp (Measurment Can Be Collected From Plant) , Blower Band (Measurment Can Be Collected From Plant) , Cyclon For Blower Of Old Pellet Machine (Measurment Can Be Collected From Plant) , Air Lock For Cyclon Of Old Pellet Machine (Measurment Can Be Collected From Plant) , Contactors All Types-Abb , Contactors All Types-Havells , Spare Kits For Contactors-Havells , Spare Kits For Contactors-Bch With Contractor Bch , Coil For Contactors-Bch, L&T , Mccb-Abb , Mccb-Havells , Mccb-L&T , Mccb-Siemens , Mccb-Bch , Mcb-Abb , Mcb-Havells , Mcb-L&T , Mcb-Siemens , Mcb-Bch , Mpcb-Abb , Mpcb-L&T , Mpcb- Siemens , Mpcb-Bch , Fuse Base-Havells , Overload Relays-Abb , Overload Relays-L&T , Overload Relays- Bch/Semens , Pvc Wire-Havells , Pvc Wire-Polycab , Electric Motor 3 Phase-Bharat Bijli , Gear Box With Motor 3 Phase-Siemens , Gear Box With Motor 3 Phase-Pbl Make , Multistrand Wires-Havells , Multistrand Wires-L&T , Multistrand Wires-Kingsway , Multistrand Wires-Kei , Multistrand Wires-Vimal , Aluminium Armoured Cables-Havells , Aluminium Armoured Cables-Kei , Copper Armoured Cables-Kei , Soft Starters-L&T , Push Button (On, Off) With Elecment (Red & Green Colour)- Teknic , R,Y,B, Indicating Lamp (Led Type) (240V Ac, 22.5 Sq.Mm)-L & T , Selec Timer (230V Av, 50-60Hz 10Va Max)-L & T , Limit Switch (24V Dc)-L & T/Ac , Limit Switch (24V Dc)-Siemens/Ac , Proximity Sensor (Hl,Ll) (12-24V Dc)-Dolfin , Capasitor 2 Kvr To 25 Kvr-Abb , Capasitor 2 Kvr To 25 Kvr-Schnider , Water Pump .5 Hp Texmo Make , Water Pump 1 Hp Texmo Make , Contactors All Types-L&T , Contactors All Types-Siemens , Contactors All Types- Bch , Spare Kits For Contactors-L&T, Bch , Coil For Contactors-L&T , Coil For Contactors-Siemens , Fuses-Abb , Hrc Fuses-Bcm , Hrc Fuses- Square Type- 700 Amp (Eator) , Fuses-Havells , Fuses-Siemens , Fuses- L&T , Fuse Base-Abb , Fuse Base- L&T , Overload Relays-Siemens , Gear Motor 3 Phase-Pbl , Gear Motor 3 Phase-Siemens , Gear Motor 3 Phase-Elecon , Gear Box With Motor 3 Phase-Pbl , Gear Box With Motor 3 Phase-Elecon , Gear Box With Motor 3 Phase-New Bharat , Gear Box With Motor-Pbl , Copper Armoured Cables-Havells , Soft Starters-Abb , Soft Starters-Havells , Soft Starters-Siemens , Soft Starters-Danfoss , Add-On Block (4 No, 2 No-2 Nc, 1 No)-L & T , Air Cricuit Breaker 1000Amp-L & T , Air Cricuit Breaker 1000Amp-Siemens , Air Cricuit Breaker 1600Amp-L & T , Air Cricuit Breaker 1600Amp-Siemens , Spare Kits For Contactors-Abb , Spare Kits For Contactors-Siemens , Fuse Base-Siemens , Electric Penel All Type-All Range- All Company , Timer Relay All Type-All Range- All Company , Terminal Timer All Type-All Range- All Company , Mpr All Type-All Range- All Company , Timer Batch 230 Vac, 50-60 Hz, 10Va Max , Ct Coil All Type-All Range- All Company , Sealing Heater , Ampere Meter Digital/Analog All Type-All Range- All Company , Spare Of Mins Fuse 32 Amp , Fuse Wire Ht 11Kv , Volt Meter Digital/Analog All Type-All Range- All Company , Dial Plate & Knobe , Ml 10/11/12 Coil Delta 415 V , Load Cell For Kanta All Capacity , Relay Oen Ac-Dc All Type-All Range- All Company , Igniter 240 Watt , Spare Coil D.C. 24 Vdc , Capacitor Heavy Duty Contactorall Type-All Range- All Company , Isolator All Type-All Range- All Company , Pneumatic Air Cylinder All Type-All Range- All Company , Pneumatic Air Connector All Type-All Range- All Company , Pneumatic Air Jointer All Type-All Range- All Company , Pneumatic Air Valve Setting T All Type-All Range- All Company , Pneumatic Air Elbow All Type-All Range- All Company , Solenide Valve With Coil All Type-All Range- All Company , Solenied Valve Fitter All Type-All Range- All Company , Seal Kit For Solenid Valve All Type-All Range- All Company , Pneumatic Air Pipe All Type-All Range- All Company Pesto , Read Switch 24 Vdc All Type-All Range- All Company , Electric Motor – 3 Phase All Type-All Range- All Company , Copper Pvc Wire All Type-All Range- All Company , Aluminum Pvc Wire All Type-All Range- All Company , Air Break Switch/Mobari Switch All Type-All Range- All Company , Aluminum Lugs All Type-All Range- All Company , Copper Lugs All Type-All Range- All Company , Cooling Fan For Pannal All Type-All Range- All Company , Exhaust Fan All Type-All Range- All Company , Flood Light Led All Type-All Range- All Company , Street Light Led All Type-All Range- All Company , Flow Indication Meter All Type-All Range- All Company , Indicator Roose Light All Type-All Range- All Company , Indicator Roose Light On/Off Switch All Type-All Range- All Company , Load Cell Junction Box All Type-All Range- All Company , Rotary Switch All Type-All Range- All Company , Sequential Timer 4 Channel All Type-All Range- All Company , Led Tube Light All Type-All Range- All Company , Vlt Control Pannal (Watch) All Type-All Range- All Company , Smps 240 Vac/24/Vdc , Elcb All Type-All Range- All Company , Temperature Meter All Type-All Range- All Company , 3 Phase, Power Factor Controller Meter All Type-All Range- All Company , Steam Indication Meter All Type-All Range- All Company , D.G. Set Protocol Meter All Type-All Range- All Company , T.M.C. Main Card All Type-All Range- All Company , Hightension Bolts (Half Thread)(16 X 140 Mm) , Hightension Bolts (Half Thread)(16 X 40 Mm) , Hightension Bolts (Half Thread)(20 X 50 Mm) , Hightension Bolts (Half Thread)(20 X 140 Mm) , Patta Bolt(5/16 X 1.25) , Cutting Wheel 4 Inch Bosh Make , Cutting Wheel 14 Inch Bosh Make , Welding Electrodes-Anand , Welding Electrodes-Moon-Arc , Bearing-Koyo , Pedestal For Bearings-Jmc , Soleniod Valve With Coil-Airmax , Soleniod Valve With Coil-Datta , Pneumatic Air Cylinder-Airmax , Pneumatic Air Cylinder-Datta , Pneumatic Connector-Airmax , Pneumatic Jointer-Airmax , V Belts-Pix , Tyre Coupling Complete-Fenner , Bush Type/Tyre Couplings Complete Set-Fenner , Steam Valves-Sant , Steam Valves-Leader , Bearing-Jmc , Bearing Sleeve-Hkg , Bearing Sleeve-Jmc , Bearing Housing-Ntn Japan , Soleniod Valve With Coil-Festo , Soleniod Valve With Coil-Janatics , Soleniod Valve Filter-Airmax , Seal Kit For Solenniod Valve-Airmax , Pneumatic Air Cylinder-Festo , Pneumatic Connector-Festo , Pneumatic Jointer-Festo , Pneumatic Air Valve Seting T-Festo , Pneumatic Air Valve Seting T-Airmax , V Belts-Fenner , Bearing-Skf , Bearing-Nbc , Oil Seal-Voston Plus , Hrc Fuse Square Type 700 Amp. (Eaton) Bussmann , Gear Box All Company, All Range , Load Cell For Kanta All Capacity (Make- Keli/Adi Controls/ Adi- Artech , Electric Motor Single Phase (All Range) , Electric Motor Three Phase (All Range) , Air Compressor (Ingersoll Rand/Elgi/Atlas Copco/ Keaser) Air Compressor With Receiver Motor Power Capacity: 11 Kw(15Hp Approx) Working Pressure: 8 Bar (Average) Free Air Delivery: 55Ft3 /Minute.( Average) Noise Level (Db)-60-70 (Average) Voltage:410 Volt (Average) Type: Screw Type , Chain Sprocket Pitch 1 (10 Teeth Simplex) , Chain Sprocket Pitch 1 (15 Teeth Simplex) , Chain Sprocket Pitch 1 (17 Teeth Simplex) , Chain Sprocket Pitch 1 (18 Teeth Simplex) , Chain Sprocket Pitch 1 (20 Teeth Simplex) , Chain Sprocket Pitch 1 (25 Teeth Simplex) , Chain Sprocket Pitch 1 (27 Teeth Simplex) , Chain Sprocket Pitch 1 (36 Teeth Simplex) , Chain Sprocket Pitch 1 (19 Teeth Duplex) , Chain Sprocket Pitch 1 (20 Teeth Duplex) , Chain Sprocket Pitch 1 (23 Teeth Duplex) , Chain Sprocket Pitch 1 (24 Teeth Duplex) , Chain Sprocket Duplex 35 T-1 Pitch , Chain Sprocket Simplex 1 Pitch(36 Teeth) , Chain Sprocket Pitch 1 (35 Teeth Duplex) , Chain Sprocket Pitch 1 Any Other Size As Per Requirment Simplex/Duplex , Full Lock (1 Simplex) , Full Lock (1 Duplex) , Patta Bolt(5/16 X 2) , Lock Washer (Mb-20) , Lock Nut (Km 20) , Tyre Coupling Complete-Unique , Tyre For Tyre Coupling-Unique/Fenner , Bush Type/Tyre Couplings Complete Set-Unique , Rubber Lovejoy Coupling-Spider , Bearing-Koyo , Pedestal For Bearings-Jmc , V Belts-Pix , Tyre Coupling Complete-Fenner , Bush Type/Tyre Couplings Complete Set-Fenner , Bearing Sleeve-Hkg , Bearing Sleeve-Jmc , Bearing Housing-Ntn Japan , V Belts-Fenner , Bearing-Skf , Bearing-Nbc , Bearing Housing-Ntn Japan , Oil Seal-Voston Plus , Greas Ap3 , Oil According Make , Pellet Dia Bolt According Samples , Tyre For Tyre Coupling- Unique/ Fenner , Press Roll Assembly Super Senior (Spectoms Make) , Distance Ring , Setting Ring , Pellet Die (10Mm Hole) Spectoms (635 Mm Od X 520 Mm Id (App.)Sample To Be Collected From Plant/Round 520 Mm Width 190 Mm, Tapper 20/23 Mm , Die Holder Ring (Rear) Dimestions Can Be Collected From Plant , Die Holder Ring (Front)Dimension Can Be Collected From Plant , Die Holder (Steel) Forged (640 Dia X 450 Mm Lg) , Die Holder Assembly Complete With T Shaft & Bearings , Main Pulley Assembly (Fly Wheel)(1200 Mm Dia X 250 Mm Wide X 9 Grove Spc) , Counter Shaft Assembly With Pulley Without Belt (234 Mm Dia X 300 Mm Wide X 9 Grove Spc) , Press Roll Cell (250 Mm Od X 180 Mm Id X 150 Mm Lg) , T Shaft (120 Mm Dia X 1185 Mm Lg) , Counter Pulley (Super Senior) Suitable To Spectom) , Greas Gun (Autho) , Pellet Die (10Mm Hole) Spectoms (635 Mm Od X 520 Mm Id (App.)Sample To Be Collected From Plant/Round 520 Mm Width 190 Mm , Tapper 20/23 Mm , Die Holder Ring (Rear) Dimestions Can Be Collected From Plant , Die Holder Ring (Front)Dimestions Can Be Collected From Plant , Die Holder (Steel) Forged (640 Dia X 450 Mm Lg) , Die Holder Assembly Complete With T Shaft & Bearings , Front Scraperas Per Sample , Main Pulley Assembly (Fly Wheel)(1200 Mm Dia X 250 Mm Wide X 9 Grove Spc) , Press Roll Cell (250 Mm Od X 180 Mm Id X 150 Mm Lg) , T Shaft (120 Mm Dia X 1185 Mm Lg) , Counter Pulley (Super Senior) Suitable To Power Mech) , Perforted Sieve Sheet (4 Ft.X8 Ft.) (4 Dia Holes X 3 Mm Thick) , Perfortedsieve Sheet (4 Ft.X8 Ft.) (5Dia Holes X 3 Mm Thick) , Perfortedsieve Sheet (4 Ft. X 8 Ft.) (6 Dia Holes X 3 Mm Thick) , Press Roll Shell , Bearing Cover , Bearing Retainer/Nut For Eccentric Shaft M 20 , Lock Washer (Mb-20) , Center Bolt/Roller Stud (Allen,Bolt,Head Type Design) , Press Roll Assembly Complete With Shell, Bearing Etc. , Bearing Cover , Spacer (Sealing Ring) , Bearing Retainer/Nut For Eccentric Shaft M 20 , Wearing Ring (720 Mm Od X 615 Mm Id X 70 Mm Lg) , Circlip For Press Roll Assembly (B160) , Esentric Shaft (125 Dia X 309 Lg) , Wearing Ring (720 Mm Od X 615 Mm Id X 70 Mm Lg) , Circlip For Press Roll Assembly (B160) , Beater (Flat Type) All Equal Weight (50 Mm X 6 Mm X 140Mm Lg) , Main Rotor Shaft (95 Mm Dia X1258 Mm Lg En 8) , M - Type Beaters (142 Mm X 60 Mm X 10 Mm Thick En 8) , Press Roll Assembly Complete With Shell, Bearing Etc. , Circlip , Spacer (Sealing Ring) , Pellet Cutting Knife D Senior , Front Scrapers Holding Stud , Circlip , Pellet Cutting Knife Super Senior , Front Scrapers Holding Stud , Chain Spoket Pitch 1 (24 Teeth Simplex) , Chain Spoket Pitch 1 (21 Teeth Duplex) , Hammer Mill Rotor With Shaft (Dimensioncan Be Collected From Plant) , Pellet Die (8 Mm Hole) Spectoms (635 Mm Od X 520 Mm Id (Approx)/ Round 520 Mm Width 190Mm, Tapper 20/23 Mm , Pellet Die (6Mm Hole) Spectoms (635 Mm Od X 520 Mm Id (Approx)/ Round 520 Mm Width 190Mm, Tapper 20/23 Mm , Pellet Die (4Mm Hole) Spectoms (635 Mm Od X 520 Mm Id (Approx)/ Round 520 Mm Width 190Mm, Tapper 20/23 Mm , Pellet Feeder Knife Big & Small, Ss (As Per Sample) , Photo Cell, Make- Siemens , Gase Glass Tube All Size , Sleve Set , Conical Washer , Oil Pump According Make , Steam Trap Valve 1500 , Steam Trap Valve All Size , Butterfly Valve , Ldo Feed Pump Suntec Make , Auto Blow Down Assembly Set , Blow Down Valve, All Company , Steam Valve (Ibr) All Size , Nrv Valve All Size
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Cooperative No of Bidders 5
Rajasthan View Result →
12.
Drinking Water Supply and Sanitation #10772798 Price Bid
Tender For Rehabilitation Of Galwa Irrigation Sub Project. District Tonk - Side shuttering including propping etc. complete (to achieve finish F 2 for :Retaining wall, counterfort, abutment, wing walls up stream or down- stream slope facings of dams and open faces of construction joints etc. 2 Centering and shuttering for slabs, beams, lintels Columns, trough with or without caps and base including propping and remove 3 Supplying of M.S. reionforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using. Tor or ribbed bars (IS :1786-1985) 4 Design, Drawing, fabrication, supply, erection, testingandcommissioningofVerticalliftsliding type gate with frame consisting of skin plate, sealingframe,stiffeners,horizontalandvertical girders,guide,stainlesssteel flat/Brass flat, rivets, wedges, lifting rodsetc., with all accessories as per relevant IS codeincluding frame & gatecomplete set for Canal Cross, Escape, Head regulator /Tank head regulator including cost of all materials, machinery,labour,cutting,aligning,welding, finishing,cleaning,sealfixing,toolsandtackles etc., applying two coat of zinc rich epoxy primer to give dry film thickness of 70 5 microns and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150 5 microns per coat thus total dry film thicknessofallcoats,includingprimercoating, should not be less than 350 microns., complete as per specificationsandapproved drawings with all leadand lifts,includingpacking&forwarding, transportation chargesforstructuralsteel components and other materials. 5 Providing, lowering, laying and jointing in trenches. standard lengths HDPE ISI marked Pipes as per IS-4984: l995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid. separately. Supply upto 110 mm dia. in coil & above 110 mm dia straight length in 6M. HDPE PE-100 PN-6 75 mm dia 6 Providing, lowering, laying and jointing in trenches. standard lengths HDPE ISI marked Pipes as per IS-4984: l995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid. separately. Supply upto 110 mm dia. in coil & above 110 mm dia straight length in 6M. HDPE PE-100 PN-6 90 mm dia 7 Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. For dowels and outer slopes. 8 Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 50 mm 9 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 150mm NP3 10 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 150mm Labour Charges only 11 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 200mm NP3 12 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 200mm Labour Charges only 13 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 600mm NP3 14 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 600mm 15 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 900mm NP3 16 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 900mmLabour Charges only 17 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 1200mm NP3 18 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 1200mm Labour Charges only 19 Fixing of Distance stone in 30x30x30 cm pit excavated in all type of strata and back filling with cement concrete (1:4:8) projected 10 cm above ground level well finished and properly cured. (Excluding cost of Distance stone) 20 Distance stone well dressed of required shape and size 60 cm x 23 cm x 7 cm with exposed faces chiesel dressed. 21 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work 22 Providing and laying damp-proof course with cement concretee grade M-150 (1 : 2 : 4) mortar prepared with 1% solution of water-proof compound complete as per specification . 75mm thick. 23 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colour and shade,laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm 24 Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 25 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concretee block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Windows side hung /Ventilators top or centre hung (openable) 26 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 27 P. & F Squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.)Size 510 mm 28 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVCbend as per IS : 7231 . 29 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 510 mm x 400 mm 30 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15mm nominal bore. 31 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc. 15mm dia nominal bore A Class 32 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:1000 litres capacity. 33 Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size : 15mm dia nominal bore 34 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: Brass 400 gm,15mm nominal bore. 35 P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make: Brass 400 gm. 15mm nominal bore. 36 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia 37 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia 38 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Socket plug 110mm dia 39 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: W.C. connector bent type 110mm dia 40 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Reducer 110 X 75 mm 110mm dia 41 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Plain Tee 110mm dia 42 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 110mm dia 43 Construction of Soakage well in all types of soil of approved drawing, top 90 Cm .Portion in 450mm thick masonry with CM 1:6, 80 mm thick stone slab covering,jointing of slab in CM 1:3 ,Ralthal, kharanja 40mm thick M-15 grade C.C flooring, earth worketc . complete including disposal of surplus earth within a lead of 50 mtr .Inner dia90 Cm & 10 to 12 Mtr deep. 44 Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in all respect Hard / dense soil 45 Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in all respect Hard / dense soil Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). 46 Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in all respect Hard soil mixed with Kankar / boulders, Morrum Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). 47 Earth work in rough (borrow area) excavation for embankments in hard soil, morrum or highly weathered strata dry or moist, including laying in20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted by vibro compactor, vibro sheep foot roller, sheep foot roller/pneumatic tyred roller to obtain dry density of at least 98% of Standard Proctor s density with initial lift of 1.5m (Excluding charges for compaction and watering) including loading and un-loading wherever required complete in all respect.With initial lead of 250 m Deduct in item no 16 (a) to (d) above if Standard Proctor s density to be achived is at least 95 48 Earth work in rough (borrow area) excavation for embankments in hard soil, morrum or highly weathered strata dry or moist, including laying in20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted by vibro compactor, vibro sheep foot roller, sheep foot roller/pneumatic tyred roller to obtain dry density of at least 98% of Standard Proctor s density with initial lift of 1.5m (Excluding charges for compaction and watering) including loading and un-loading wherever required complete in all respect.With initial lead of 250 m Deduct in item no 16 (a) to (d) above if Standard Proctor s density to be achived is at least 95 Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). Add extra over item 10 (a) for lead beyond 250m & upto 750m (for average 1/2Km). 49 (i) Compaction of earth or highly weathered strataBy mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor / vibro sheep foot compactor required as per site condition to obtain dry density of.at least 95% of Standard Proctor s density 50 Watering of earth including cost of carriage of water when source of water is up to 1 Km 51 Add extra for earth taken from private land with all lead and lift, land to be arrangged by contractor through private negotiations. Item applicable on certification by E.E. that no Government land is available with 250 meters from borrow area. 52 (i)Removal of slit/soil/earth, sand, pebbles,Malba , debris, rubbish, stone pebbles & obstruction deposited in canal bed up to design line grade and sections having design due to erosion/scour/slips in canal banks/silting with or without bushes and weeds etc. in dry or moist condition from canal bed including dewatering, loading unloading and disposal at suitable place as directed by Engineer in charge with initial lead of 50m. and lift upto 1.5 m with proper dressing on canal bed complete in all respect For depth above 15 cms but upto 30cms havingUnlined section 53 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & itsISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR - Short point (up to 3 mtr.) 54 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & itsISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR - Medium point (up to 6 mtr.) 55 Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR - On board 56 S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories with own OEM CM/L No. as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR - 25 mm 57 Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . -1200 mm Sweep BEE 2 Star rated (service value >=4.5 to < 5 ) 58 Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulbin existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70,minimum life time of minimum25000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure A attacheded with this BSR. -9 Watt 59 Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulbin existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI >70,minimum life time of minimum25000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure A attacheded with this BSR. -18/20 Watt 60 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 2 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR - 2 x 2.5 sq. mm. + 1x1.5sqmm 61 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR Single pole MCB (With B/C curve tripping Characteristics) - 6 A to 32 A rating 62 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR Metal door (single phase) IK-09 and IP-43 with Metal end box - 4 Way (4+2) 63 Providing & Fixing of 240/415 V isolatorISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage,true contact indication,Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting,minimum phase termination capacity of 35sq.mm.IP 20 contact protection and fitted in existing distribution board / sheetincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR Double pole isolator - 63 A rating 64 Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:6 65 Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:6 Masonry work in superstructure 66 Brick masonry (using well burnt clay bricks of size 230x 110x 70 mm, class designation 75 as per specification) up to plinth including all leads of all construction materials including curing etc. complete.In cement sand mortar 1:6 Add extra for superstructure brick masonry on item no 10 67 Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materialsof thickness:20 mm 68 Nominal mix of Plain Cement Concrete well mixed and laid in position using 20% max permissible limit of plums above 160 mm and up to 450mm, including curing and finishing etc including all leads of all construction materials complete in all respect with well graded crusher broken stone aggregate. The plums shall be distributed evenly and shall be not closer than 150 mm from the surface. PCC Nominal Mix 1:3:6 with Plum Max size of Aggregate 80 mm, 69 Preparation and dressing the sub grade including removal ofirregularities up to 7.5 cm in soil, morrum mixed with pebbles, small boulders and kankar & murrum forBed 70 Preparation and dressing the sub grade including removal ofirregularities up to 7.5 cm in soil, morrum mixed with pebbles, small boulders and kankar & murrum forSide slopes 71 Providing and laying cast in situ plain cement concrete design mix M-15 grade for lining, using well graded crusher broken aggregate of maximum nominal size 20 mm conforming to IS:383-1970, including proportioning of the ingredients by weigh batching and mixing by mechanical mixer including finishing of concrete lining, cutting of grooves for construction joints, complete as per specification with all leads and lifts of construction material complete for canal bed of thickness. 7.5 cm 72 Providing and laying canal lining with mechanically vibrated 300 x 150 x 50 mm PCC blocks made from concrete mix 1:2:4, A20 including all leads and lifts of material, curing, stacking, loading, unloading & transportation of blocks from manufacturing site to lining site. Single tilelining consisting of 12 mm thick cement mortar (1:6) plaster on sub-grade, 12 mm thick sandwich plaster in cement mortar (1:5) over sub grade & 50 mm thick tile lining in cement mortar (1:3) laid over 6 mm thick mortar layer in cement mortar (1:3) including curing,all leads of all construction materials, curing charges and machinery charges with mixture vibration etc., complete as per technicalspecifications.In sides 73 Brick masonry lining consisting of 12 mm thick plaster in cement mortar (1:6) on sub grade, 16 mm thick sandwich plaster in cement mortar (1:3) over base plaster & 70 mm thick brick masonry in cement mortar (1:3) laid over 6 mm thick mortar layer in cement mortar (1:3) including curing etc. including all leads of construction materials complete as per specifications. In bed 74 Brick masonry lining consisting of 12 mm thick plaster in cement mortar (1:6) on sub grade, 16 mm thick sandwich plaster in cement mortar (1:3) over base plaster & 70 mm thick brick masonry in cement mortar (1:3) laid over 6 mm thick mortar layer in cement mortar (1:3) including curing etc. including all leads of construction materials complete as per specifications. In sides 75 Filling of construction joints with Bitumen based sealing compound, including painting the concrete sleepers below lining and sides of lining panel as per specification provided in IS: 3384-1986 and all leads of all construction materials including cost of sealing compound, complete in all respect. 76 Providing and laying under drainage below canal lining consisting of porous concrete of mix ratio 1:4 (1 cement: 4 course aggregate) 75 mm diametre, 300 mm long supported by 75 mm thick layer of coarse aggregate 12.5 mm to 40 mm size and 50 mm thick layer of sand. 77 Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3(1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering, shuttering and reinforcement. Well graded crusherbroken stone aggregate of maximum size upto; 20 mm 78 Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3(1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering, shuttering and reinforcement. Well graded crusherbroken stone aggregate of maximum size upto 20 mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
13.
Housing Urban and Rular Development #10766853 Price Bid
Tender For Upgradation Of Varam Melmuruvam Road In Kalrayanhills Block In Kallakurichi District-2 Clearing the Scrub jungle including all labour charges for burrying and burning etc., 3 Earth work excavation and depositing on bank within initial lead and lift in hard gravelly soil for Cutting side drain etc, complete. as per SS20 A 4 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 5 Km 2/440 - 3/0 6 Km 3/0-4/0 7 Km 4/0-5/0 8 Km 5/0-5/240 9 Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete. 10 Km 2/440 - 3/0 11 Km 3/0-4/0 12 Km 4/0-5/0 13 Km 5/0-5/240 14 Providing and laying Prime Coat over WBM/ WMM surface using 7 Kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev-5 15 Providing and laying Tack Coat over WBM/ WMM surface (treated with primer) using 2.50 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5 16 Providing and laying Bituminous Concrete to 25/30/40 mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30/ VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP using( Vibratory Roller) 17 Provision of 5 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint. 18 Provision for Hectometer Stone 19 Provision for Kilometer stone 20 CROSS DRAINAGE WORKS 21 Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B 22 5.00m Span RCC slab Culvert @ 2990. 23 1.50m Span RCC slab Culvert @ 4680 24 1.50m Span RCC slab Culvert @ 4885 25 Collection and supply of M sand and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard specifications 26 5.00m Span RCC slab Culvert @ 2990. 27 1.50m Span RCC slab Culvert @ 4680 28 1.50m Span RCC slab Culvert @ 4885 29 Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 30 5.00m Span RCC slab Culvert @ 2990. 31 1.50m Span RCC slab Culvert @ 4680 32 1.50m Span RCC slab Culvert @ 4885 33 Cement concrete 1:3:6 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 34 5.00m Span RCC slab Culvert @ 2990. 35 1.50m Span RCC slab Culvert @ 4680 36 1.50m Span RCC slab Culvert @ 4885 37 Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 38 5.00m Span RCC slab Culvert @ 2990. 39 1.50m Span RCC slab Culvert @ 4680 40 1.50m Span RCC slab Culvert @ 4885 41 Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. (BELOW GROUND LEVEL) 42 5.00m Span RCC slab Culvert @ 2990. 43 1.50m Span RCC slab Culvert @ 4680 44 1.50m Span RCC slab Culvert @ 4885 45 Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. (ABOVE GROUND LEVEL) 46 5.00m Span RCC slab Culvert @ 2990. 47 1.50m Span RCC slab Culvert @ 4680 48 1.50m Span RCC slab Culvert @ 4885 49 Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum 50 5.00m Span RCC slab Culvert @ 2990. 51 1.50m Span RCC slab Culvert @ 4680 52 1.50m Span RCC slab Culvert @ 4885 53 Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works 54 5.00m Span RCC slab Culvert @ 2990. 55 1.50m Span RCC slab Culvert @ 4680 56 1.50m Span RCC slab Culvert @ 4885 57 Providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and technical specifications 58 5.00m Span RCC slab Culvert @ 2990. 59 1.50m Span RCC slab Culvert @ 4680 60 1.50m Span RCC slab Culvert @ 4885 61 Providing and fixing Tar Paper including labour etc complete. 62 5.00m Span RCC slab Culvert @ 2990. 63 1.50m Span RCC slab Culvert @ 4680 64 1.50m Span RCC slab Culvert @ 4885 65 Providing and fixing weepholes of 100 mm dia. PVC pipes of required lengths including cost and conveyance of all materials to work site, cost and labour etc complete 66 5.00m Span RCC slab Culvert @ 2990. 67 1.50m Span RCC slab Culvert @ 4680 68 1.50m Span RCC slab Culvert @ 4885 69 Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete, 70 5.00m Span RCC slab Culvert @ 2990. 71 1.50m Span RCC slab Culvert @ 4680 72 1.50m Span RCC slab Culvert @ 4885 73 Retaining wall 74 Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B 75 Ch 2840-2890 76 Ch 4620-4650, 4670-4710, 4800-4850 77 Ch 5200-5240 78 Collection and supply of M sand and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard specifications 79 Ch 2840-2890 80 Ch 4620-4650, 4670-4710, 4800-4850 81 Ch 5200-5240 82 Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 83 Ch 2840-2890 84 Ch 4620-4650, 4670-4710, 4800-4850 85 Ch 5200-5240 86 Cement concrete 1:3:6 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 87 Ch 2840-2890 88 Ch 4620-4650, 4670-4710, 4800-4850 89 Ch 5200-5240 90 Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. (ABOVE GROUND LEVEL) 91 Ch 2840-2890 92 Ch 4620-4650, 4670-4710, 4800-4850 93 Ch 5200-5240 94 Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. (Below GROUND LEVEL) 95 Ch 2840-2890 96 Ch 4620-4650, 4670-4710, 4800-4850 97 Ch 5200-5240 98 CC Pavement 99 Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B 100 Ch 2910-2970 101 Ch 3040-3080, 3855-3905, 3980-4000 102 Ch 4100-4160, 4200-4240 103 Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 104 Ch 2910-2970 105 Ch 3040-3080, 3855-3905, 3980-4000 106 Ch 4100-4160, 4200-4240 107 Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 108 Ch 2910-2970 109 Ch 3040-3080, 3855-3905, 3980-4000 110 Ch 4100-4160, 4200-4240 111 Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete. 112 Ch 2910-2970 113 Ch 3040-3080, 3855-3905, 3980-4000 114 Ch 4100-4160, 4200-4240 115 Construction of un-reinforeced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2. M30 (Grade), coarse and fine aggregaes conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2cum capacity and appropriate weigh batcher using approved mix design, lain in approved fixed side form work (steel channel, laying and fixing of 25 micron thick polythene film, wedges, steel plates including levelling the formwork a sper drawing), spreading the concrete with sholves, rakes, compacted using needle, screed and plate vibrators and finished in continous operation including including provsion of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construciton joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and technical Specification Clause 1501. 116 Ch 2910-2970 117 Ch 3040-3080, 3855-3905, 3980-4000 118 Ch 4100-4160, 4200-4240 119 Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. (Below GROUND LEVEL) 120 Ch 2910-2970 121 Ch 3040-3080, 3855-3905, 3980-4000 122 Ch 4100-4160, 4200-4240 123 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
West Bengal View Result →
15.
Public Administrative Department #10740823 Price Bid
Tender For Emergency Repairing Works Of Pot Holes (By Means Of Paver Block) In The Kmc Br-Vii Area - 1 Earthwork in cutting to form road section in correct profile including removal of spoils not exceeding initial lead of 50m and initial lift of 1.5m (Mode of measurement: pre works and post works) (i) In ordinary soil 2 BUILDING WORKS(D) Flooring..A. ORIGINAL WORKS..(3)Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. 3 ORDINARY CEMENT CONCRETE ( MIX 1:2:4 ) WITH GRADED STONE CHIPS ( 20 MM NOMINAL SIZE) EXCLUDING SHUTTERING AND REINFORCEMENT, IF ANY, IN GROUND FLOOR AS PER RELEVANT IS CODES (BASED ON PWD SCHEDULE OF RATES, W.E.F. 01.11.2017 WITH CORRIGENDA DT.04.06.2018) 4 BUILDING WORKS. (U) - Additional Items : 9) 100 mm thick interlocking designer concrete paver block M-50 grade for hightraffic zone, bus terminus, industrial complex, mandi houses etc. as per IS: 15658- 2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. [Note: Subgrade CBR shouldnot be less than 5]. Grey (3rd Corrigenda & addenda dated 04.06.2018) 5 CHAPTER - VIII SUPPLYING OF MATERIALS HIRE CHARGES OF MACHINERIES 8.29Hire charges for engaging Air Compressor machine with minimum pressure capacity of 5.0 Kg/sq.cm arrangement including all necessary equipments and operating staff, carriage, fuel, Tools and plants all complete for cutting Road / hard crust cutting with pneumatic hammer at desired point in water supply works as per direction of EIC . a) With Pneumatic hammers For beyond 8hrs. of working 6 Sub Total 7 GST 18% 8 CESS 1%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
16.
Housing Urban and Rular Development #10721400 Price Bid
Tender for Strengthening Of The Road From Ao Road To Thathrayanpettai Road Km 0/0-0/625 (R-144) , Clearing The Scrub Jungle Including All Labour Charges For Burrying And Burning Etc., , Picking 5 Cm To 10 Cm Old Metalled Surface And Sectioning - 1 Sq.M , Earth Work Excavation And Depositing On Bank Within Initial Lead And Lift In Hard Gravelly Soil For Cutting Side Drain Etc, Complete. As Per Ss20 A , Collection And Supply Of Carted Earth From Approved Quarry An Average Lead 1Km Including Cost And Conveyance Of All Materials To Site And Labour Charges Etc. , Construction Of Granular Sub-Base By Providing Close Graded Material, Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material To Work Site, Spreading In Uniform Layers With Motor Grader On Prepared Surface And Compacting With Vibratory Power Roller To Achieve The Desired Density, Complete As Per Clause 401 , Providing And Laying Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam(Wmm) Specification Including Premixing The Material With Water At Omc In Machanical Mix Plant Carriage Of Mixed Material By Tipper To Site Laying In Uniform Layers 250Mm Thick With Pavers In Subbase/Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density Including Cost Of Material,Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete. , Providing And Laying Prime Coat Over Wbm/ Wmm Surface Using 7 Kg Of Emulsion Bitumen (Ss1) Per 10 Sqm For Preparatory To Another Bituminous Construction Over It, Including Cost Of Material, Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete As Per Clause 502 Of Morth Rev-5 , Providing And Laying Tack Coat Over Wbm/ Wmm Surface (Treated With Primer) Using 2.50 Kg Of Bitumen Emulsion (Rs1) Per 10 Sqm For Preparatory To Another Bituminous Construction Over It Including Cost Of Material, Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete As Per Clause 503 Of Morth Rev-5 , Providing And Laying Bituminous Concrete To 25/30/40 Mm Thick Using 0.13 Cum Of 19.00-9.50Mm, 0.17 Cum Of 9.50-2.36Mm And 0.26 Cum Of 2.36 And Below With 50.30 Kgs Of Vg30/ Vg40 Bitumen For Premixing Per 10Sqm Including Cost And Conveyance Of All Materials To Cmp Site, Heating The Bitumen And Aggregate To Required Temperature And Mixing Them In Required Temperature In Central Hot Mix Plant 20-30 Ton Capacity, Conveying The Mix By Tipper Trucks To Paver Site, Spreading The Mix To Uniform Thickness Of 40Mm With Mechanical Paver To The Specified Grades And Cross Sections And Consolidated By 8-10 Tonne Vibratory / Pneumatic Roller To The Required Density Etc., Including Labour For Attending To Paver To Site Etc., Including Hire Charges And Fuel Charges For 20-30 T Cmp With Bitumen Boiler, Tipper Trucks, Paver Finisher / 9M Paver Finisher, Vibratory / Pneumatic Roller And All Other Tools And Plant Required, Including Fuel And All Other Incidental Charges Etc., Complete As Per Specification Using Cmp Using( Vibratory Roller) , Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35. The Finished Surface To Be Level, Uniform And Free From Streaks And Holes Etc., Complete As Per Mort&H Specification No.803 , Providing And Erecting Of Retro - Reflectorised Cautionary, Mandatory And Informatory Signs (Without Definition Board) Made Out Of High Intensity Prismatic Grade Sheeting Confirming To Type-Iv Standards Of Irc-67: 2012 And Astm D 4956 -09, Specification And Fixed Over 2Mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame Of 25Mm X 25Mmx3mm Mild Steel Angle And Supported On A Mild Steel Angle Post 75X75x6mm With A Clear Height Of Not Less Than 2.10M From The Ground Level To The Bottom Of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67-2012 And Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 45Cmx45cmx60cm Size Including Cost And Conveyance Of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion Of The Work As Directed By The Engineer-In-Charge. High Intensity Retro - Reflectro Sheet Shall Consist Of Minimum Coefficient Of Retro-Reflection As Per Table 6.6 Of Irc 67-2012. The Retro - Reflective Sheeting Shall Be Covered Under 7 Year Warranty Issued For Field Performance And A Certified Copy Of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67:2012 . ( As Per Mort&H Specification No.801) 60 Cm Equilateral Triangle Cautionary Signboard , Provision For Hectometer Stone , 6.00M Span Culvert @ 214M , Earth Work Excavation And Depositing On Bank With Initial Lead Of 10M Initial Lift Of 2M In Hard Stiff Clay Soil Etc Complete For Open Foundation As Per Ss 20 B , Plain Cement Concrete 1:4:8 Mix Using 40Mm Hbg Metal Including Cost And Conveyance Of All Materials And All Labour Charges For Mixing Laying And Compacting Etc. Complete , Cement Concrete 1:3:6 Mix Using 40Mm Metal Including Cost And Conveyanceof All Materials To Work Site And All Labour Charges Etc. , Supplying And Erecting Centring Sor Sides And Soffits With M.S Sheets Laid Over Silver Oak Joists With Casurina Props For Supporting,Labour Charges Etc.,Complete , Supplying And Erecting Centring Sor Sides And Soffits With M.S Sheets Laid Over Silver Oak Joists With Casurina Props For Supporting,Labour Charges Etc.,Complete (Bed Block) , Cement Concrete 1:2:4 Mix Using 20Mm Metal Including Cost And Conveyanceof All Materials To Work Site And All Labour Charges Etc. , Reinforced Cement Concrete 1: 1 1/2: 3 Mix Using 20Mm Metal Including Cost And Conveyanceof All Materials To Work Site And All Labour Charges Etc. , Supplying And Fabricating And Placing In Position Of Mild /Tor Steel For All Reinforced Cement Concrete Works As Per The Design Given Including Cost Of All Steel,Binding Wire And Labour Forfabrication Etc.,Complete Complying With Standard Specification , Providing Fixing 20Mm Bituman Felt For Expansion Joint Between Dirt Wall & Deck Slab , Providing Weepholes In Brick Masonry/Stone Masonry, Plain/Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing , Providing Tar Paper For Bearing B/N Bed Block & Deck Slab , Providing cement concrete Pavement At Km 0/0-0/161 , Construction Of Granular Sub-Base By Providing Close Graded Material, Mixing In A Mechanical Mix Plant At Omc, Carriage Of Mixed Material To Work Site, Spreading In Uniform Layers With Motor Grader On Prepared Surface And Compacting With Vibratory Power Roller To Achieve The Desired Density, Complete As Per Clause 401 , Providing And Laying Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam(Wmm) Specification Including Premixing The Material With Water At Omc In Machanical Mix Plant Carriage Of Mixed Material By Tipper To Site Laying In Uniform Layers 250Mm Thick With Pavers In Subbase/Base Course On Well Prepared Surface And Compacting With Vibratory Roller To Achieve The Desired Density Including Cost Of Material,Labour Charges, Rentals For Machinery, Fuel And All Other Incidental Charges Etc., Complete. , Construction Of Un-Reinforced, Dowel Jointed At Expansion And Construction Joint Only, Plain Cement Concrete Pavement, Thickness As Per Design, Over A Prepared Sub Base, With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M30 (Grade), Coarse An , Towards Bituman Pad , Gst Amount For Providing Service To Government Contract Works For The Above Construction & Maintenance Works. { Gst Amount Is The Total Gst Amount For Overall Quoted Amount (Both Construction And Maintenance) Above This Row In Column Bb For All Works In This Package} (Refer Clause 13.2 & 13.3 Of Section 2 Of Instruction To Bidders (Itb) Of Sbd)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
17.
Public Administrative Department #10704124 Price Bid
Tender For Formation Of Bt Road At Appakudal P.K. Factory Street To Anna Nagar In Appakudal Town Panchayat; 1 Earthwork excavation in all soils and sub soils except hard rock not requiring blasting with initial lead and lift including re-filling the sides of foundation in layer of 15 cm thick watering , ramming ,depositing the surplus earth in the premises as directed by departmental officers etc., complete as per standard specification. as per SS 20 B TNDSS NO: 23&24VI (S2), VII 9,10 2 Plain Cement Concrete of mix 1 : 4 : 8 (One Cement Four sandEight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII 3 Supplying and errecting centering to sides and soffits including supports and struttingfor drainage sides andculvert body wall sidesusing 90cm x 60cm and B.G 10stifenedwith welded mild steel angles of size 25mm x 25mm x 3mm for boardinglaid over( silver oak joists ) of size 10cm x 6.50cm spaced at about 90cm including all labour charges and cost and conveyance of all materials to site etc. complete complying with standard specification. TNDSS NO: 30&86a) For Side Wall 4 b) For Deck Slab 5 Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. 6 Supplying fabricating and placing in position of steel rods using TMT. or Ribbed Tor Steel including cost of binding wire, cost of labour charges for fabrication and placing in positionetc. Complete. Complying with std. specifications 7 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - 8 Providing Granolithic floor finish of the 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panellingwherever necessary and as directed by the departmental officers) 9 Construction of Granular Sub-base by providing close graded material,mixing in a machanical plant at OMC,carriage of mixed material to work site,spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to acheive the desired density,Complete as per clause 401. 10 Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadamspecification including premixing the materials with waterat OMC in mechnanical mix plant carriage of mixed material by tipper to site laying inuniform layers with paver sin Sub Base/Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 11 Providing and laying Prime Coat over WBM/WMM surface using 7Kg of Emulsion Bitumen (SS1) per 10sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.,complete as per Clause 502 of MORTH Rev-5 12 Providing and laying Tack Coat over WBM/WMM surface (treated with primer) using 2.50Kg of Bitumen Emulsion (RS1) per 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5 13 Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm,0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9m paver finisher, Vibratory/Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 14 Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with50.30 kgs of VG30( 60/70)bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30t on capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9mpaver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTHRev-5 15 Providing and Laying of well Gravel including cost and conveyence of the same to work site with an lead of 5Km including Stacking the same to Departmental gauge for Premeasurement including all labour charges for Laying, Spreading etc, Complete and directed by the Departmental Engineer for making up low berms complying with standard Specifications. 16 Providing and laying of hot applied thermoplastic compound of 2.5mm thick including refllectorising glass beads @ 250grms per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35 the Finished surface to be level, uniform and free from steaks and holes etc., complete as per MORT & H Specification NO.803MAINTENANCETowards the charges for routine maintenance of the road work executed under NABARD SCHEME including dressing of berms by refilling the gully with the earth from borrow pits, cleaning of wild seasonal growth on berms, destilting of side drains and CD works, white washing guard stones, painting of KM, HM stones, parapets, cutting of branches of trees, refixing displaced guard stones, caution boards, speed limit boards etc., with the periodicity for the above activities as prescribed in IRC-SP-20:2002 and as directed by the departmental officers except for the constructional defects which has to be rectified by the contractor at his own cost. 17 Clearing and Grubbing by LightJungle removing and disposing of all materials such as bushes, shrubs, stumps, roots, grass, weeds, top organic soil not exceeding 150mm in thickness as rubbish including all other incidental charges etc., complete as per MORTH Specification 111, 112, 201.a) Upkeeping 1st year (50%) 18 b) Upkeeping 2nd year (60%) 19 c) Upkeeping 3rd year (60%) 20 d) Upkeeping 4th year (60%) 21 e) Upkeeping 5th year (60%) 22 Earth Work excavating and deposting on bank with initial lead of 10m & initial lift of 2m in Hard stiff clay, Stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS20A for making up the berms. as per clause 111, 112, 201, 202, 301 to 305 & 900 of MORTH Vth Revision [Twice in a year]a) Upkeeping for 1st year (40%) 23 b) Upkeeping for 2nd year (40%) 24 c) Upkeeping for 3rd year (40%) 25 d) Upkeeping for 4th year (40%) 26 e) Upkeeping for 5th year (40%) 27 Tack coat- Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.20 kg/sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per clause 503 a) 4 th year 3% 28 b) 5 th year 5% 29 Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30 kgs of VG30( 60/70)bitumenfor premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30t on capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9mpaver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTHRev-5a) 4 th year 3%
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
18.
Educational and Research Institute #10680797 Price Bid
supply of tool machinery goods- 1 Connecting screw driver 2 Neon tester 3 Insulated combination pliers 4 Electrician knife 5 Soldering Iron Changeable bits 6 De- soldering pump 7 Soldering Iron 8 Optical Drives 9 Post error debugging card 10 PCI slot Testing tool 11 Network Management Software 12 Wireless Network Adapter 13 Router 14 LAN Cards 15 WI-FI LAN Card 16 Power Meter 17 Media Convertor 18 24 port UTP jack panel 19 NVR 20 POE adapters kit 21 IP Camera Outdoor 22 Analog camera with dvr 23 SMPS 24 Blu-Ray driveand player Dell/ hp/ toshiba 25 Digital Camera 26 Network storage 27 Card Reader 28 SMPS Trainer kit 29 Foot rule steel tape 30 Steel Measuring Scale 31 MARKING KNIFE 32 Try Square 33 Bevel Square 34 Carpenter marking gauge 35 Carpenter mortise gauge 36 Hand Saw 37 Metal smoothing plane Anant 38 Screw driver 39 Contraction measuring scale 40 Wi Fi Router 41 Switch 42 DVD or Blu-Ray Writer 43 Network Rack 44 Screw Driver Set 45 Mini Dongle for Bluetooth devicesConnection 46 Patch Panel 47 Punching Tool 48 Tally 49 Box drawing instrument 50 Protractor celluloid 51 Scales plotting box wood 6 metric scales 52 Set square transparent 53 Set square celluloid 54 T-Square 55 Template- Architects and builders 56 Telescopic Alidade 57 Levelling staff straight pieces 58 Transit Theodolite with stand with all accessories 59 Digital theodolite 60 Instrument for total station 61 DLP projector 62 First aid box 63 Screen for projector 64 Air conditioner 65 Document Camera Visualiser 66 Smart board-inter active board 67 Measuring Steel Tape 68 Combination Plier Insulated 69 Screw Driver Insulated 6mm X 150 mm 70 Electrician screw driver thin stem insulated handle 4mm X 100 mm 71 Heavy Duty Screw Driver insulated 72 Electrician Screw Driver thin stem insulated handle 73 Punch Centre 74 Knife Double Bladed Electrician 75 Neon Tester 76 Steel Rule Graduated both in Metric and English Unit 77 Hammer cross peen with handle 78 Connecting screwdriver 79 Neon tester 500 V. 80 Screw Driver Set 81 Soldering iron 82 Electrician knife 83 Tweezers 84 Digital Multimeter 85 Soldering Iron Changeable bits 86 De- soldering pump electrical heated manual operators 87 Precision set of screw drivers 88 Precision set of screw drivers 89 Precision set of screw drivers 90 Tweezers Bend tip 91 Steel measuring tape 92 Tools maker vice 93 Crimping tool pliers 94 Magneto spanner set 95 File flat second cut 96 File flat smooth 97 Plier - Flat Nose 98 Round Nose pliers 99 Hammer ball pen 100 Allen key set Hexagonal set of9 101 Tubular box spanner set of 6Nos 102 Magnifying lenses 103 Continuity tester 104 Hacksaw frame adjustable 105 Chisel Cold Flat 106 Hand Drill Machine Electric with Hammer Action 107 Bench Vice 108 Bench Vice 50 mm 109 DC Regulated Variable Programmable DC Power Supply 110 LCR meter Digital Handheld 111 Analog multimeter 112 Clamp meter 113 Dimmer starter 114 Autotransformer 115 Milli Ammeter AC 116 Op Amp trainer 117 Digital IC Trainer 118 Digital IC Tester 119 Digital and Analog Bread Board Trainer 120 POWER ELECTRONICS TRAINER with at least 6 nos of onboard applications 121 Electronic circuit simulation software with 6 user licenses 122 Different types of electronic and electrical cables connectors sockets terminations. 123 DSO colour 124 PAM PPM PWM trainer kit 125 AMFM Commercial radio receivers 126 Sensor trainer kit containing Various sensors like Thermocouple RTD Thermocouple  load cell strain gauge LVDT smoke sensors speed sensor Limit Switch Photo sensors Optocouplor Proximity Sensor 127 Fiber optic communication trainer 128 Seven segment DPM 129 LCD based DPM 130 SMPS of different make 131 UPS trainer 132 Mobile phone Trainer 133 Cell phone power source with charger chords for different cell phones 134 LCD TV Trainer kit 135 LCD TV 136 LED TV Trainer kit 137 LED TV 138 Home theatre system 139 Solar Training Kit Simulator 140 LED lighting system 141 Trammel 142 Steel Rule with metric British graduation 143 Compressor unit 144 Try Square 145 Pocker. 146 Caliper inside spring type 147 Mallet. 148 Caliper hermaphrodite spring type 149 Carrier for mounting components such as PB relay boxes. 150 Caliper outside spring type 151 Aviation Snips straight Cut 152 Cut section model for pneumatic components 153 Divider spring type 154 Planishing hammer. 155 Scriber 156 Centre Punch 157 Screw driver 158 Depthmicrometer. 0-25 mm 159 Stake grooving. 160 Hammer ball peen With handle 161 Comparators Gauge - Dial Indication with Stand and Bracket 162 Hammer ball peen With handle. 163 File flat - second cut 164 Engineer s try square knife- edge 165 File flat smooth 166 File half round second cut 150 mm 167 Vernier Bevel protector 168 Carbide Wear Block 169 Carbide Wear Block 170 Dot punch 171 Spirit Level metal Type - 2 172 Arm strong type tool bit holder 173 Combination Set 174 Arm strong type tool bit holder 175 Arm strong type tool bit holder 176 Stillson wrenches 177 Micrometer inside with extension rods 178 Vernier caliper 179 Adjustable pipe chain tonge to take pipes 180 Adjustable spanner 181 Screw pitch gauge Metric 182 Surface plateC.IGranite with Stand and Cover 183 Marking table Mild steel 184 Universal scribing block 185 V-Block pair with clamps 186 Punch letter set 187 Portable hand drill Electric 188 File knife edge smooth 189 File feather edge smooth 190 File triangular smooth 191 File round second cut 192 File square second cut 193 File flat second cut safe edge 194 File half round second cut 195 File round bastard. 196 File hand second cut 197 File card 198 Oil Can 199 Wooden handle forged Soldering Iron copper bit 200 Blow Lamp 0.50 liters. 201 Spanner adjustable 202 Double Ended tubular Box spanner set with Tommy bar 203 Glass magnifying 204 Clamp C 205 Hand Reamer set Tapar pin straight flute 206 Machine Reamer parallel Helical flute 207 Scraper flat 208 Scraper triangular 209 Scraper half round 210 Pipe wrench 211 Adjustable pipe die set BSP 212 Machine vice - Swivel Base 213 Machine vice - Swivel Base. 214 Sleeve drill Morse 215 Vice bench 216 Wing compass 217 Power tools for fastening 218 Different Profile gauges Plate type - For demonstration 219 Knurling tool Diamond 220 Knurling tool straight 221 Knurling tool Diagonal 222 Indexable boring bar with inserts 223 Machine maintenance mannual for Lathe Pedestal grinder Drill machine Power saw 224 Temperature gauge 225 Dowel pin straight 226 Standard Tap screws 227 Lapping plate 228 Caps screws 229 Drill gauges 230 Cast Iron Globe Valve Flanged type 231 C.I. Sluice Gate valve flanged type 232 Stop cock 233 Slip-on Forged steel Flange 234 Pipe threading die with handle 235 Pulleys for V-belt or Flat belt 236 V-belt and Flat belt 237 Packing gasket 238 Washer clutch keys jib cotter circlip 239 Bearing different types 240 Lifting sling 241 Bearing extractor 242 Pulley extractor 243 File half round bastard 244 REFRIGERATOR ( 365 LTR ) DOUBLE DOOR 245 GAS TANDOOR WITH SKEWER ROTI SET ( 12 SKEWERS ) COMMERCIAL 246 BAIN MARIE 2 PAN WELL 55.5 X 70 X 20 CM 247 CHINESE GAS BURNER DURA STEEL 60 X 24 X 30 248 SALAMANDER AVON REFRIGERATION 600 X 510 X 550 MM 249 ELECTRONIC GEYSER 25 LTR( HAVELLS, ADONIA )DIGITAL TYPE 250 DOUGH KNEADING MACHINE ( 5KG CAP )1000 WATT, STAND MIXER 251 WATER BOILER ( ELECTRICAL 15 LTR)2000 WATTS 252 MIXER CUM GRINDER FOOD PROCESSOR 1 NOX 1000 WATT,WITH 7 ACCESSORIES 253 WOK CHINESE KADAI 16 DIA METER 254 PRESSURE COOKER ( 5 LTR ) CAP 255 EGG CUTTER STAINLESS STEEL 256 STEAK HAMMER ALUMINUM 257 MS CUPBOARD INTERIO 2 DOOR WITH 3 SELVES 7 X 3 X 3 258 HAND BLENDER 250 WATT 259 SIZZLER PLATES ( 17-18 DIA) HEAVY FINE QUALITY 260 COFFEE URNS , ( 40 CUP CAPACITY) 261 CHINESE CHOPPER 262 MS CHOPPER 600WATT 263 KITCHEN KNIFE, BIG CARTINI 8 BLADE 264 VEGETABLE KNIFE 13 CM BLADE, MEYER CERAMIC KNIFE 265 BREAD KNIFE 8 BLADE 266 PASTA MACHINE , 150 WATT 267 WATER PURIFIER REVERSE OSMOSIS 6.5 LTS UV + UF 268 SODA MAKER MACHINE HEAVY DUTY INDUSTRIAL MODEL KVR - 8 FLAVOR 269 ESPRESSO MACHINE COFFEE GRINDER 1300 WATT 270 MINIBAR FRIDGE 271 LED 42” HD DISPLAY 272 MUSIC SYSTEM WITH DVD PLAYERS CONCEALED SPEAKER, 5.1 CHANNEL 273 ELECTRIC OVEN 20 LTRS (IFB, WONDER CHEF,HAVELLS) 274 DISPLAY FOOD CABINET OSHAM SLIDING DOOR ,814X 641 X 831 MM W X D X H 275 ROOM SERVICE TROLLEY HOME CENTRE MONTOYA TYPE 276 CARAFE BOROSIL SMALL WITH STRAINERS, 350 ML 277 CARAFE BOROSIL LARGE WITH STRAINERS , 700ML 278 SOUP FLASK TERMOSTEEL ( 500 ML ) 279 WATER FLASK THERMOSTEEL FLIP LID FLASK 1000ML SILVER 280 PASTA TROLLEY GOLDEN LINE 4 CASTOR WHEEL 281 EPABX SYSTEM + AVS MACHINE S- TECH CS432, 4 MAIN TRUNK LINES & 32 EXTENSION 282 SAFE DEPOSIT LOCKER / FORTE 40 BIOMETRIC SAFE 283 UMBRELLAS , CITIZEN 3 FOLD 284 STEEL CUPBOARD WITH UNBREAKABLE GLASS , INTERIO 4 SHELVES 7.5 X 3 X 2.5 285 FRIDGE WITH CABINET 275 LTR 286 VACUUM CLEANER WET & DRY 287 WASHING MACHINE 8KG FULLY AUTOMATIC 5 X 1400 RPM , INBUILT HEATER 288 WATER HEATER 25 LTRS HSE-SES , 2000 WATT 289 CARPET EXTRACTOR, CARPET CLEANER MACHINE 1100 , W PRO E X 25 290 HIGH PRESSURE JET CLEANER , KK PWIN 165 1800 WATT , 165 BAR 291 LUGGAGE RACK MINT WOOD H 27.5 X W 28.5 X D 12.8 292 HEAVY BOTTOM PAN 10 LTR NON STICK CANEROLI 40 CM 293 COOKER ( 2 LTR ) CLASSICS 2L ALUMINUM 294 MANDOLIN GRATER ADJUSTABLE SS 4 BLADES WITH HANDLE 295 PROBE THERMOMETER ( 75 - 100 DEGREE CELCIUS ) ST 9283B LCD , DIGITAL MULTISTEM THERMOMETER 296 CAKE STAND ( SS ) 13 TOP 297 HEAT PROOF GLOVES GRIPWELL KELVES PALM LEATHER HEAT RESISTANT GLOVES 298 GRINDING STONE FINE GRINDER STONE 10 299 PIZZA CUTTER STAINLESS STEEL 300 COOKIE CUTTER ( 5 SHAPES ) ALLAMWAR 12 PCS STAINLESS STEEL CUTTER SET 301 SANDWICH GRILLER / TOASTER SW X 400 700 WATT ( 302 JUICER MACHINE PHILIPS HR 1863/20 , 2 LTR 303 ROLLING BASE WOODEN 10 304 FRYING PAN NON STICK GRANITE FRY PAN ( 280 MM) BLACK 305 FRYING PAN LARGE NON STICK FRY PAN 240 MM0 306 CLEVER STAINLESS STEEL 2 IN 1 VEGETABLE SCISSORS 307 Steel rule 308 Outside spring caliper 309 Inside spring caliper 310 Hermaphrodite caliper 311 Divider spring 312 Centre Punch 313 Hammer 314 Cold chisel flat 315 File flat bastard 316 File flat 317 File flat smooth 318 Screw Driver 319 Scribing blockuniversal 320 Screw driver heavy duty 321 Spindle blade screw driver 322 Solid parallels in pairs different sizes in Metric 323 Oil stone 324 Punch letter set 325 Punch number set 326 Drill Chuck 327 File Half round 328 File triangular smooth 329 Reamer 330 Reamer adjustable 331 Tool bits holder Armstrong R.H. 332 Table chuck 333 Machine vice 334 Compound angle vice standard sine 335 Universal Machine Vice 336 Shaper tool holder turret type to suit the machine 337 Base chuck forslotter to suit the machine 338 Milling Cutter Side and face cutter 339 Milling Cutter Side and face cutter Adison 340 Milling Cutter Adison 341 Milling Cutter -Side and face cutter adison 342 Milling Cutter - Double Angle Unequal. adison 343 Milling Cutter - Double Angle Unequal. adison 344 Milling Cutter - Single Angle.. adison 345 Milling Cutter - Slitting Saw Cutter adison 346 Milling Cutter - Slitting Saw Cutter. adison 347 Milling Cutter - Shell End Mill.Parallel Shank end mills adison 348 Milling Cutter - Parallel Shank end mills. adison 349 Milling Cutter -mills. Parallel Shank end mills.. adison 350 Milling Cutter - Parallel Shank end mills… adison 351 Milling Cutter - Parallel Shank end mills.... adison 352 Milling Cutter - T Slot Cutter with Parallel Shank adison 353 Micrometer outside. 354 Micrometer depth gauge 355 Digital micrometer 356 Vernier Caliper 357 Direct reading vernier caliper 358 Combination set 359 Vernier bevel protractor 360 Telescopic gauge 361 Centre punch 362 Divider spring joint 363 Caliper odd leg spring joint 364 Wrench adjustable 365 Spanner double ended 366 Pipe wrench 367 Plumbing hammer weight 368 Four way reversible valve 369 Tape measuringgraduation in mm 370 Voltmeter ACDC portable precision grade Digital Panel board type 371 Rule steel 372 Drawing Board 373 Easel a Type stand 374 Hack Saw with Frame 375 Chisel Knife 376 Chisel Knife- 8mm 377 Chisel Knife- 10mm 378 Chisel Knife 20mm 379 Chisel Knife- 30mm 380 Diamond Glazier Knife 381 Paint Tin Opener 382 Shave Huck Knife 383 Glider Knife 384 Paint Burner Acetylene Gas 385 Screw Driver 386 Mild Steel Panels 387 Sink Stainless steel 388 Suction feed spray gun with accessories 389 Infra red lamp 390 Pneumatic Polishing Machine with Pads 391 Pipe vice 392 Pipe wranch 10 393 Pipe wranch 16 394 flat file- smooth finish 395 Circuler cut file 396 Raft cut 397 Pipe dai set metric Inches 398 Gun Spray with Gravity Feed Cup with Complete accessories with Complete accessories 13ltr 399 Gun Spray with Gravity Feed Cup with Complete accessories.. 400 Conventional Spray Gun For Pressure Feed 401 Pencil Hardness Tester 402 Air Compressor single Phase 1 HP 403 File - Flat - Bastard 404 File - Flat - Safe Edge 405 Cooling tower 406 File flat roughdouble cut 407 File half round fine double cut 408 File round finedouble cut 409 File flat fine double cut 410 File square finedouble cut 411 File triangular fine double cut 412 Try square 413 Divider spring joint 414 Caliper spring joint in side 415 Caliper odd legspring joint 416 Hammer ball pane 417 Cold Chisel flat and cross cut 418 Engineers rule 419 Tape measuring 420 Pliers flat nose 421 Line tester 422 Tweezers 423 Oil can 424 Surface Gauge universal 425 Bench vice 426 Hack saw tubular metal frame adjustable 427 Snip sheet metal straight nose 428 Snip sheet metal curved nose 429 Wooden mallet Nylon mallet 430 Round Punch 6mm 431 Round Punch 432 Round Punch 4mm 433 Screw driver plastic handle 434 Screw driver plastic handle Flat tip 435 Philips screw driver 436 Soldering ironexchangeable copper tip 437 Knife foldedstainless steel - 438 Tenon saw 439 Firmer chisel 440 Fire buckets 441 Quick couplesprocess tube adopter 442 Flaring tool set single type for tube. 443 Swaging tool punch type set of size for tube. external type for copper tube 444 Pipe cutter miniature for copper tube 445 Pinch of tool for copper tube 446 Ratchet spanner 447 Capillary plug gauge 448 Piercing pliers 449 Spanner double ended 450 Wrench adjustable 451 Wrench adjustable length 250mm 452 Valve key handleTreated as consumable 453 Hollo Punch hole for cutting gasket 454 Scissor gasketcutting stainless steel 455 L-Allen key 456 T-Allen key set 457 Pipe cutter withbuilt in reamer and space cutter for copper tube 458 Lapping plate 459 Hammer ball peen 460 Tap set withmatching drills 461 Tap set withmatching drills V to 462 Piercing Valve 463 Feeler gauge 464 Tape measuringgraduation in mm 465 Ammeter ACDCportable precision grade Digital Panel board type 466 Multi meter digital type 467 C.R.O Single beam 468 C.R.O Dual trace Double beam 469 A.F.O Oscillators 470 Pressure gauge 471 Compound gauge Digital type 472 Electronic leak detector 473 Sling psychro meter mounted on aluminum back 474 Stop watch 475 Multi meter 476 Sensor thermometer digital 477 filler guage 478 Wire gauge 479 Dial thermometer 480 Compressors testers for small hermetic compressors 481 Precision set of T5 T6 T7 screwdrivers- 482 Jacket stripper Coring tool for 500 series cable 483 Center conductor cleaner 484 Universal drop trimmer for RG 6/11 cables 485 F - connector tool for RG 6/11 cables 486 F connector compression tool for RG 6/11 cables 487 Solar Training Kit Simulator With built in meters for DCV DCA AC Multifunction Meter for ACI ACV Power Frequency Protection Circuits BS-10 terminals formaking the connection Single Dual axis tracking system Charge Controller PWM based MPPT Charging Stage Bulk Absorptions and Float 488 LED lighting system Measurement of Power Voltage Current Power Factor and Light output performance of different lighting products like LED CFL at variable inputvoltages 0 to 245V variable AC 489 PLC Systems with digital IP OP modules and software 6 Digital Inputs 24V DC. 4 Digital Outputs 24V DC 2K Words of memory 256 words of register. Powerful features like built in Floating Point Sub Routines etc.One RS232 C communication facility for PC interface. Three channels can be configured as follows Pulse width modulation output or Pulse train outputor High speed counter input. 490 Electronic Pneumatics Trainer kit 491 CRO dual trace 20 MHZ ( Component testing facilities ) 492 Steel wire Brush 50mmx150mm 493 carborundum 15 x 5 x 4 cm smooth 494 Straight edge gauge 2 ft. 495 Straight edge gauge 4 ft. 496 Surface gauge with dial test indicator plunger type i.e. 0.01 mm 497 Tachometer Counting type 498 Taps and Dies complete sets 5 types 499 Taps and wrenches - Metric 500 Temperature gauge 0- 100 deg c 501 Thread pitch gauge metric BSW 502 Timing lighter 503 Universal puller for removing pulleys bearings 504 V Block 75 x 38 mm pair with Clamps 505 Vacuum gauge to read 0 to 760 mm of Hg 506 Valve Lifter 507 Valve spring compressor universal 508 vernier caliper 0-300 mm with least count 0.02mm 509 Vice grip pliers 510 Voltmeter 50VDC 511 Hand Shear Universal 250mm 512 Solid Parallels in pairs Different size in Metric 513 Spanner Clyburn 15 514 Spanner T. flocks for 515 Spark lighter 516 Spark plug spanner 14mm x 18mm x Size 517 Spirit level 2V 250 05 518 Spring tension tester 519 Stake grooving. 520 Spanners socket with speed handle T-bar ratchet and universal upto 32 mm set of 28 pieces with box 521 Steel tool box with lock and key folding type 400x200x150 mm 522 Wire cutter and stripper 523 Car Jet washer with standard accessories 524 Chaser hard WV 9 to 40 T.P.I. set of 11 external. 525 Chaser hand WW 9 to 40 T.P.I. set of 11 internal. 526 Chisel 10 cm flat 527 Chisels cross cut 200 mm X 6mm 528 Circlip pliers Expanding and contracting type 15cm and 20cm each 529 Clamps C 100mm 530 Clamps C 150mm 531 Clamps C 200mm 532 Compression testing gauge suitable for diesel Engine 533 Connecting rod alignment fixture 534 Copper bit soldering iron 0.25 Kg 535 Cylinder bore gauge capacity 20 to 160 mm 536 DC Ohmmeter 0 to 300 Ohms mid scales at 20 Ohms 537 Depth micrometer 0- 25mm 538 Dial gauge type 1 Gr. A complete with clamping devices and stand 539 Dividers 15 cm Spring 540 Drift Punch Copper 15 Cm 541 Drift copper 10 x 15 12 mm 542 Drill point angle gauge 543 Drill twist 1.5 mm to 15 mm various sizes by 0.5 mm 544 230 V 25 watts Electric Soldering Iron 230 V 60 watts 545 Electric testing screw driver 546 Engineers square 15 cm. Blade 547 Engineers stethoscope 548 Equipment puncture in box 549 File flat 20 cm bastard 550 File half round 20 cm second cut 551 File Square 20 cm second cut 552 Files assorted sizes and types including safe edge file 20 Nos 553 Glow plug tester 554 Granite surface plate 1600 x 1000 with stand and cover 555 Grease Gun 556 Grover- 34mm. 557 6mm Grover 558 Growler 559 Hacksaw frame adjustable 20-30 cm 560 Hammer Chipping 0.25 Kg 561 Hammer copper 1 Kg with handle 562 Hammer Mallet 563 Hammer Plastic 564 Hand operated crimping tool i for crimping up to 4mm and ii for crimping up to 10mm 565 Hand reamers adjustable 10.5 to 11.25 mm 11.25 to 12.75 mm 12.75 to 14.25 mm and 14.25 to 15.75 mm 566 Hand vice 37 mm 567 High rate discharge tester cell tester 568 Left cut snips 250mm 569 Magneto spanner set with 8 spanners 570 Magnifying glass 75mm 571 Marking out table 90X60X90 cm 572 Multi Scan Tool 573 Multimeter digital 574 Oil Stone 15 cm x 5 cm x 2.5 cm 575 Oscilloscope 20MHz 576 Outside micrometer 0 to 25 mm 577 Outside micrometer 25 to 50 mm 578 Pat melting 579 Philips Screw Driver set of 5 pieces 100 mm to 300 mm 580 Pipe cutting tool 581 Pipe flaring tool 582 Piston Ring groove cleaner 583 Pliers side cutting 15 cm 584 Poker 585 Portable oil monitoring Indicator 586 Power Supply 0-12 v lamp 587 Radiator pressure cap 588 Rear axle assembly- gear box steering box assembly of the diesel engine 589 Right cut snips 250mm 590 Rivet sets snap and Dolly combined 3mm 4mm 6mm 591 Scriber 15 cm 592 Scriber with scribing black universal 593 Set of stock and dies - UNC UNF and metric 594 Shear Tin Mans 450 mm x 600mm 595 Sheet Metal Gauge 596 Soldering Copper Hatchet type 500gms 597 Sher Tinmans 300mm 598 Shovel 599 Ammeter 300A 60A DC with external shunt 600 Angle plate adjustable 250x150x175 601 Angle plate size 200x100x200mm 602 Arbor press hand operated 2 ton capacity 603 Auto Electrical test bench 604 Battery charger 605 Belt Tensioner gauge 606 Spanner ring set of 12 metric sizes 6 to 32 mm. 607 Blow Lamp 1 litre 608 AC alternator slip ring puller 609 Allen Key set of 12 2mm to 14mm pieces 610 Air blow gun with standard accessories 611 Alternator for tractor different type Mico , Bosch, tux 612 Hands file 20 cm. Second cut flat 613 Caliper outside spring joint 614 Caliper inside spring joint 615 Caliper odd-leg firm joint 616 Steel Rule 617 Scriber 618 Hammer ball peen 619 Centre punch 620 Prick punch 621 Divider spring joint 622 Safety goggles clear glass Good quality 623 Marking table CI 624 Bench vice 125 mm jaw 625 V - Block 626 Pliers flat nose 627 Micrometer Outside 628 Micrometer Inside 629 Vernier Bevel Protractor 630 Vernier Micrometer 631 Universal Dial Test Indicator - Plunger Type 632 Vernier Height Gauge 633 Plain Ring and Plug Gauge 634 Drill Twist Set 635 Reamer machine 636 Combination Drill Centre Drill 637 Tool Bit assorted sizes on holder 638 Chalk Board on mobile stand 639 Desk 640 Hand Chaser 641 Hand Chaser 642 Revolving Centrer to suit Lathe tailstock 643 Tool Cemented carbide assorted shaped External for steel turning 644 Machine Chase 645 Coventry Die head 646 Lathe Mandrels Diff. Types 647 Coventry Type Die Head Self opening 648 Stainless steel rule 649 Hack saw frame 650 File half round 651 File flat 652 Try square 653 Earth clamp 654 Electrode holder ESAB 655 Oxygen Gas Pressure regulator double stage ESAB 656 Acetylene Gas Pressure ESAB 657 CO2 Gas pressure regulator with flow meter ESAB 658 Argon Gas pressure regulator ESAB 659 First Aid box ESAB 660 Flash back arrester torch mounted ESAB 661 Flash back arrester cylinder mounted ESAB 662 Screw Driver 663 Screw Driver 664 Terminal screw Driver 665 Hammer Ball peen 666 Neon tester pencil bit type 667 Small crimping tools assorted 668 Spanner set DE 669 Screw driver set set of 5 670 File half round 2nd cut 671 File round 2nd cut 672 Soldering iron TONY 673 Neon tester 674 Spade 675 Sickle 676 Khurpa 677 Kasola 678 Trifali 679 Zindra 680 Dori (Nylon rope) 681 Wheel hand hoe 682 pH meter 683 Electrical conductivity meter 684 Flame photometer 685 Spectrophotometer 686 Atomic absorption spectrophotometer 687 Shaking apparatus 688 Distillation unit 689 Ammonia distillation unit (with heaters) 690 Gas connection 691 Sampling tools (augers) 692 Refrigerator 693 Gas cylinders with regulators 694 Gas cylinders with regulators 695 Gas cylinders with regulators 696 Incubator (with temperature control) 697 Infrared soil moisture estimation unit 698 Electric oven 699 Soil cores 700 Soil infiltratormeter 701 GPS system with mobile phone 702 Table top centrifuge 703 Auto Titrator 704 Battery charger
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Haryana View Result →
19.
Public Administrative Department #10679744 Price Bid
Supply Of Tools , Equipments And Machineries For Training Purpose In Iti .-2 Air Ratchet With Standard Accessories 3 Angle Plate 4 Angle Plate Adjustable 5 Angle Plate Adjustable 6 Angle Plate Size 7 Anvil 8 Anvil With Stand 9 Arbor Press Hand Operated 2 Ton Capacity 10 Belt Sander ( Narrow Surface ) 11 Belt Tensioner Gauge 12 Body Shell For Painting - Light Motor Nvehicle Of Different Manufactures 13 Chain Pulley Block Capacity With Tripod Stand 14 Collapsible Panel Stands 15 Colour Matching Cards / Panels ( Magnetic, Nchromalux Card Or Primed Metal ) 16 Compressed Air Line 17 Compression Testing Gauge Suitable For Diesel Engine With Standard Accessories 18 Computerised Colour Retrieval Unit N ( Spectrophotometer ) 19 Connecting Rod Alignment Fixture 20 Cut Section Of 4 / 6 Cylinder Diesel Engine With Moving Condition To Show Momentum Ofinternal Parts 21 Cylinder Liner- Dry & Wet Liner, Press Fit & Slidefit Liner 22 Die Grinding Kit 23 Diesel Engine Crdi 4 Stroke 24 Diesel Engine Running Stationery Type 25 Diesel Engine Six Cylinder In Running Ncondition 26 Different Type Of -Body Hammers 27 Different Type Of Body Picks 28 Different Type Of Body Spoon 29 Different Type Of Bumping Hammers 30 Different Type Of Dolly Block 31 Different Type Of Engine Bearing Model 32 Different Type Of Finishing Hammers 33 Different Type Of Pick Hammers 34 Different Type Of Piston Model 35 Different Type Of Spoon 36 Dismantling And Assemblingwith Swivelling Stand 37 Door Handle Tool ( Clip Pullers ) 38 Down Draft Spray Booth ( 7.5 X 5 M, Combi Nspray / Oven Or Separate Spray / Oven 39 Drill Point Angle Gauge 40 Dust Extraction Connections ( Vacumm ) 41 Electronic Paint Mixing Scales ( Accurate Nto 0.1 Grams. Explosion Proof 42 General Purpose Dolly 43 Grinding Machine ( General Purpose ) D.E. Pedestal With 300 Mm Dia. Wheels Rough Andsmooth 44 Growler 45 Heavy Commercial Vehicle Type ( Withoutbody On Frame ) 46 Hollow Punchset Of Seven Pieces 6Mm To15mm 47 Injector – Multi Hole Type, Pintle Type 48 Interchangeable Driver Set 49 Lead Light 50 Liquid Penetrant Inspection Kit 51 Magneto Spanner Set With 8 Spanners 52 Marking Out Table 53 Oil Pump For Dismantling And Assembling. 54 Paint Measuring / Mixing Stick & Jug Sets 55 Paint Scrapper, Putty Mixing Board, Putty Applicator / Knife 56 Paint Surface Film Thickness Gauge N ( Electronic ) 57 Paint Tinting System Mixing Machine ( Exposition Proof ) Parts Spray Booth Cabin ( Ventilated To 30 Cubic M / Nminute ) 58 Panel Buffing Machine 59 Part Sprey Booth Cabin 60 Pipe Bending Machine ( Hydraulic Type ) 61 Pipe Cutting Tool 62 Pipe Flaring Tool 63 Piston Ring Compressor 64 Piston Ring Expander And Remover. 65 Piston Ring Groove Cleaner. 66 Pneumatic Rivet Gun With Standard Accessories 67 Punch Letter 4Mm ( Number ) 68 Radiator Pressure Cap 69 Random / Dual Action Orbital Sander 70 Rivet Sets Snap And Dolly Combined3mm, 4Mm, 6Mm 71 Scraper Flat 72 Scraper Half Round 73 Scriber 74 Scriber With Scribing Black Universal 75 Shear Tin Mans450 Mm X 600Mm 76 Sheet Metal Cutting Pliers-Left , Right Hand And Straight -Jaw Configuration 77 Sheet Metal Gauge 78 Sher Tinmans 79 Soldering Copper 80 Soldering Copper Hatchet Type 81 Solid Parallels In Pairs ( Different Size ) In Metric 82 Spanner Clyburn 83 Spanner T. Flocks For Screwing Up And Up-Screwing Inaccessible 84 Spanners Socket With Speed Handle, T-Bar, Ratchet And Universal Upto 32 Mm Set Of 28 Npieces With Box 85 Spark Lighter 86 Spark Plug Spanner 14Mm X 18Mm X Size 87 Spirit Level 88 Spring Tension Tester 89 Starter Motor Axial Type, Pre-Engagement Type& Co-Axial Type 90 Steel Wire Brush 91 Straight Edge Gauge 2 Ft. 92 Straight Edge Gauge 4 Ft. 93 Stud Extractor Set Of 3 94 Stud Remover With Socket Handle 95 Suction Cup 96 Tandem Master Cylinder With Booster 97 Thermostat 98 Thread Pitch Gauge Metric, Bsw 99 Timing Lighter 100 Tin Smiths Bench Folder 101 Tinnman’S Shear 102 Tinnman’Sshear 103 Toe Dolly 104 Trammel 105 Trim And Upholstery Tools 106 Turbocharger Cut Sectional View 107 Underbody Sealer & Corrosion Proofing Nmaterials & Spray Units 108 Universal Puller For Removing Pulleys, Bearings 109 V’ Block 75 X 38 Mm Pair With Clamps 110 Valve Lifter 111 Valve Spring Compressor Universal 112 Various Sanding Blocks-Soft, Hard, Speed File& De-Nibbling Tools 113 Ventilated Preparation Bays ( Fully Illuminated. Down Or End Draught 114 Water & Oi L Separati On System 115 Water Pump For Dismantling And Assembling 116 Weld Through Primer Application Equipment 117 Wire Gauge ( Metric )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Uttar Pradesh View Result →
20.
Public Administrative Department #10664958 Price Bid
Supply Of Tools And Machinery-2 Calliper Inside With Spring 15 Cm 3 Callipers Outside With Spring 15 Cm 4 Dividers With Spring 15 Cm 5 Hammer Ball Peen With Handle 0.5 Kg 6 Philips Screw Driver Set Of 5 Pieces 100 Mm To 300 Mm 7 Scriber 15 Cm 8 Spanner D.E. Set Of 12 Pieces 6Mm To 32Mm 9 Spanner, Ring Set Of 12 6 To 32 Mm. ( Metric ) 10 Spanners Socket With Speed Handle, T-Bar, Ratchet And Universal Set Of 28 Pieces With Box Up To 32 Mm 11 Ac Alternator Slip Ring Puller Variable 12 Air Ratchet With Standard Accessories 13 Air Impact Wrench With Standard Accessories. 14 Anvil With Stand 50 Kgs 15 Belt Tensioner Gauge 16 Chain Pulley Block Capacity With Tripod Stand 3 Ton 17 Cleaning Tray 45X30 Cm. 18 Compression Testing Gauge Suitable For Diesel Engine With Standard Accessories 19 Cylinder Bore Gauge Capacity 20 To 160 Mm 20 Cylinder Liner- Dry & Wet Liner, Press Fit & Slide Fit Liner 21 Depth Micrometer 0-25Mm 22 Different Type Of Engine Bearing Model 10 Different Types On Board 23 Different Type Of Piston Model 5 Different Typeson Board 24 Drift Punch Copper 15 Cm 25 Drill Twist ( Various Sizes ) 1.5 Mm To 8 Mm By 0.5Mm 26 Engineer’S Square Blade Size 15 Cm 27 Engineers Stethoscope 28 Files Assorted Sizes And Types Including Safe Edge File ( 20 No’S ) 29 Fuel Injection Pump ( Diesel ) Inline 4 / 6 Cylinders Rsv Mechanical Pneumatic Governor Type. 30 Grease Gun 31 Grease Gun Heavy Duty Trolley Type 10 Kg Capacity 32 Growler 33 Hacksaw Frame Adjustable 20-30 Cm 34 Hammer Chipping 0.25 Kg 35 Hand Operated Crimping Tool / Wire Up To 4Mm 36 Hand Vice Up To 37 Mm 37 Hollow Punch Set Of Seven Pieces 6Mm To 15Mm 38 Injector – Multi Hole Type, Pintle Type 39 Lifting Jack Screw 3 Ton, 5Ton & 20 Ton 40 Magneto Spanner Set With 8 Spanners 41 Automotive Oil Pump For Dismantling And Assembling. 42 Philips Screw Driver Set Of 5 Pieces ( Pozidrivand Torx Drive ) 100 Mm To 300 Mm 43 Piston Ring Compressor 44 Piston Ring Expander And Remover. 45 Piston Ring Groove Cleaner. 46 Pliers Flat Nose 15 Cm 47 Pliers Side Cutting 15 Cm 48 Prick Punch 15 Cm 49 Punch Letter 4Mm ( Number ) 50 Radiator Cut Section-Cross Flow Radiator With Sectioned Side Tanks, Radiator Core. 51 Radiator Cut Section-Down Flow Radiator With Sectioned Upper & Lower Tanks, Radiator Core And Cap. 52 Radiator Pressure Cap Lmv 53 Scraper Triangular 25 Cm 54 Scriber 15 Cm 55 Scriber With Scribing Black Universal 56 Sheet Metal Gauge 57 Spanner T. Flocks For Screwing Up And Up- Screwing Inaccessible 58 Spanner, Adjustable 15Cm 59 Spark Plug Spanner 14Mm X 18Mm X Size Long Bit For Alto / 800 60 Starter Motor Axial Type, Pre-Engagement Type & Co-Axial Type 61 Steel Measuring Tape In A Case 10 Meter 62 Straight Edge Gauge 2 Ft. 63 Stud Extractor Set Of 3 64 Stud Remover With Socket Handle 65 Surface Gauge With Dial Test Indicator Plunger Type 0.01 Mm 66 Tachometer ( Counting Type ) 67 Tandem Master Cylinder With Booster 68 Thermostat 69 Thread Pitch Gauge Metric 70 Timing Lighter 71 Torque Wrenches 5-35 Nm, 12-68 Nm & 50-225 Nm 72 Universal Puller For Removing Pulleys, Bearings 73 V’ Block 75 X 38 Mm Pair With Clamps 74 Valve Lifter 75 Valve Spring Compressor Universal 76 Automotive Water Pump For Dismantling And Assembling 77 Wire Gauge ( Metric ) 78 Working Model Of Air Brake Assembly Two Brake Drums, Vehicular Air Compressor Driven By Suitable Electric Motor, Air Dryer, Brake Chamber . Stop Light, Different Valves, Air Pressure Gauges. With All Accessories. 79 Alternator Assembly Used For Lmv Alternator ( >50 Amp ) 80 Carburetor – Solex, Mikuny For Dismantling And Assembling Solex, Mikuny For Dismantling And Assembling 81 Chain Pulley Block-3 Ton Capacity With Tripod Stand 82 Cut Section Model Of Mock Layout Of A Motor Car –Electrical System Working Model Wiring With Parts And Accessories Of A Car To Be Arranged According To The Electrical Circuit Of A Car. Working Of Self-Starter, Alternator, Wiper Motor, Horn, Lighting System, Sparks From Plug To Be Shown With Distributor & Battery. Should Be Mounted On Suitable Table 83 Cut Section Models Of Shock Absorbers 84 Cut Section Of Cross Ply And Radial Tyres 85 Cut Section Working Model Of Automatic Transmission Gear Box Sectioned To Show The Internal Mechanism Of Forward And Reverse Speeds. 86 Cut Section Working Model Of Centrifugal Clutch Assembly. Centrifugal Clutch Sectioned To Show The Internal Details 87 Cut Section Working Model Of Diaphragm Clutch Assembly. Diaphragm Clutch Sectioned To Show The Internal Details 88 Cut Section Working Model Of Single Plate Clutch Assembly Single Plate Clutch Sectioned To Show The Internal Details 89 Demonstration Board Of Electronic Ignition System, Ignition Coil With Ht Coil, Ht Wires, Spark Plugs, Ignition Switch, Coil, Distributor, Battery, And Wiring. 90 Demonstration Board Of Mpfi System With Injectors, Rail, Inlet Manifold, Throttle Body, Distributor, Ecu, Purge Valve, Sensor, Crank Pulley, Fuel Tank Module. 91 Disk Brake In Working Condition With Caliper Assembly With All Parts Exhibiting Brake Disc, Caliper Assembly, Tandem Master Cylinder, Brake Hoses, Oil Bottle, Pedal, Etc. 92 Drum Brake Assembly In Working Condition Brake Drum, Tandem Master Cylinder, Oil Container, Brake Hose, Brake Pedal. 93 Front Axle ( Rzeeppa Joint ) With Stand For Dismantling And Assembly Rzeppa Joint Of Lmv. 94 Full Floating Axle And Semi-Floating Axle Assembly Drum & Axle Casing Should Be With All Components In Working Condition. 95 Functional / Experiment Model Of Different Type Of Sensors. With Different Type Of Sensors Like Throttle Position Sensor, Manifold Absolute Pressure Sensor, Engine Coolant Temperature Sensor, Vehicle Speed Sensor, Oxygen Sensor, Crankshaft Position Sensor, Camshaft Position Sensor, Intake Air Temperature Sensor, Mass Air Flow Sensor, Knock Sensor With Ecu. 96 Steering Assembly –1.Rack & Pinion 2.Worm & Roller N3. Recirculating Ball 4.Power Steering 5. Electric Assisted Power Steering Rack & Pinion With Steering Wheel, Column, Tie Rod End. Worm & Roller Steering Assembly With Drop Arm.Recirculating Ballsteering With Pitman Shaft And Drop Arm. Hydraulic Working Power Steering With Steering Wheel, Column, Flow Pipe, Hydraulic Pump, Oil Reservoir.Electric Assisted Power Steering With Rack And Pinion, Electric Motor And Motor Control Module N 97 Synchronous Gear Box With Stand For Dismantling And Assembly Gearbox With 5 Forward & 1 Reverse Gear 98 Tandem Master Cylinder With Booster Working Model 99 Automotive Exhaust 5 Gas Analyser ( Petrol & Diesel ) And Diesel Smoke Meter ( Optional ) Exhaust 5 Gas Analyzer Petrol Arai Approved To Check Co, Co2, O2, And Hc& No. Diesel Smoke Meter Arai Approved. 100 Diesel Engine – Crdi - 4 Strokefor Dismantling And Assembling With Swiveling Stand. Latest 4 Stroke 4 Cylinder Turbo Charged Crdi Engine, 800-1600Cc, In Running Condition, With Ecm, Bcm, And All Sensors, Wiring, Fuel Feed & Cooling System & Instrument Cluster 101 Tyre & Split Rim Wheel Assembly 102 Working Model Of Power Windows Showing Parts Like Door, Glass With Motor And Its Gear Arrangement And Operating Switch. 103 Working Model Of Torque Converter Model Of Lmv 104 Diesel Engine ( Running Condition ) Stationary Type Single Cylinder Single Cylinder, Oh Valves, Fuel Tank With Handle, Fuel Feed, Water Cooling, Oil Pump. 105 Multi Scan Tool To Scan Engine, Abs & Ebd, At, Srs, Body Control And Immobilizer Should Perform Automotive Sensor Simulation Test Specially Designed To Diagnose And Simulate Vehicle Sensor Faults For Sensors Like Map Sensor, Intake Air Temperature Sensor, Tp Sensor Etc. 106 Spring Tension Tester Manually Operated With Analogue Display. 107 Working Condition Of Diesel Engine – Crdi- 4 Stroke Engine, Assembly With Fault Simulation Board Latest 4 Stroke 4 Cylinder Turbo Charged Crdi Engine, With Ecm, Bcm And Sensors, Wiring, Fuel Feed, Cooling System& Instrument Cluster. Fault Setting Bank For Minimum 8 Sensors And With Diagnostic Socket&Scanner To Read The Faults. Engine Management Circuit Diagram To Be Printed On The Panel Board. 108 Cut Section Of 4 / 6 Cylinder Diesel Engine In Moving Condition To Show Movement Of Internal Parts 6 Cylinder Diesel Engine In Working Condition To Show Movement Of Internal Parts 109 Diesel Engine Six Cylinder In Running Condition Latest Diesel Engine Crdi 4 Stroke 6 Cylinders, Turbocharged Engine In Running Condition. All Sensors, Wiring, Fuel Feed, Cooling System & Instrument Cluster 110 Air Bag Simulator Driver & Co Driver Air Bags, Seat Belts With Front Seats, Crash Sensors, Air Bag Ecu, Wiring Harness 111 Air Conditioning Service Unit ( Car ) Suitable For R134a. Recovery With Vacuum Pump, Automatic Drain & Stop After Recovery. 112 Four Stroke Petrol Engine With Cng Setup- Working Condition Latest 4 Stroke 3 / 4 Cylinder Mpfi Engine In Running Condition 800-1600Cc With Ecm, Bcm And All Sensors, Wiring, Fuel Feed System, Cooling System& Instrument Cluster With Cng / Petrol Selection Switch On Panel. 113 Mpfi Petrol Engine With Swiveling Stand Along With Special Tools For Dismantling And Assembling Latest 4 Stroke 3 / 4 Cylinder Mpfi Engine In Running Condition 800-1600Cc With Ecm, Bcm And All Sensors, Wiring, Fuel Feed System, Cooling System & Instrument Cluster. 114 Cut Section Of 2 Stroke 2 W Engine Single Cylinder Petrol Engine ( 2-Stroke ) Motor Cycle / Scooter Along With Special Tools And Accessories ( Optional ) 115 Transfer Case With Stand For Dismantling And Assembly. To Show The Gear Mechanism Of Forward And Reverse Speeds. 116 Tube / Tyre Vulcanizing Machine 220 V , Heater Capacity 400W X 2 With Different Types Of Die &Mould 117 Two Post Car Lift – Capacity 4000 Kg Hydraulic Type With Mechanical Arms Locking. 118 Tyre Changer Machine Motorized Pneumatic Type, Rim Clamping Facility, And Bead Breaking Facility With Air Inflating Device. 119 Working Condition Of Petrol Mpfi Engine Assembly With Fault Simulation Board Latest 4 Stroke 3 / 4 Cylinder Mpfi In Running Condition, 800-1600Cc With Ecm, Bcm And All Sensors, Wiring, Fuel Feed System, Cooling System & Instrument Cluster With Fault Setting Bank For Minimum 6 Sensors With Diagnostic Socket&Scanner To Read The Faults. Engine Management Circuit Diagram To Be Printed On The Panel Board. 120 Tubed Tyre For Truck 121 Tubless Tyre For Truck 122 Punching Tool For Punching Rj45 Socket With Cat 5 Cable 123 Digital Micrometer 3.5 Digit Hand Held Type 124 Lan Tester ( Utp Cat 5 Cable Tester Rj45 ) 125 Hand Held Vaccum Cleaner 126 Air Conditioner Split Type 1.5 Ton 127 Ms Office 2010 ( Professional ) Software 128 Antivirus With One Year Validity 129 Tally Erp 9 Software 130 Fire Buckets Standred Size 131 Fire Extinguisher Co2 2 Kg Capacity
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 10
Uttar Pradesh View Result →
21.
Defence #10650216 Price Bid
Annual Maintenance Contract Of Qty-33 Crs Machineries For Period Of One Year , High Pressure Compressor Pt No . Niv Make: Reavell , Uk , Upstroke Hydraulic Press Pt No . Niv Make: Indimeck , Kurla , Mumbai , Extruder Pt No . Niv Make: Indimeck , Kurla , Mumbai , Rubber Mixing Machine Pt No . Niv Make: Indimeck , Kurla , Mumbai , Hydraulic Pump Test Rig Pt No . U-216Ue-84 Make: Russian , Gen . Purpose Hydraulic Test Pt No . C-3390Ue-82 Make: Russian , Gen . Purpose Pneumatic Test Rig With Booster System Pt No . C-3757-Ue-82 Make: Russian , Centrifugal Fuel Pump Testing Rig ( Along With Elgi Lp Compressor ) Pt No . C-3869Mue-82 Make: Russian , Hydro Pressure Test Rig Pt No . Upos Make: Russian , Rubber Tensile Testing Machine Pt No . Niv Make: Indimec , Eddy Current Test Set With Probes Pt No . Defectometer 2 . 837 , Ultrasonic Flaw Detector With Probes And Charger - Mig29k Pt No . Ud2-12 Make: Russian , Geni Weigher 2Kgx0 . 1Gm Pt No . Hgm2000 Make: Indian , Pneumatic Comparator Set , Pco-21 , Pt No . Tx 430 Make:Vijay Enterprises Gujrat , , Hydraulic Comparator Set Pc0-21 Pt No . Tx 430 Make: Vijay Enterprises , Gujarat , India , Climatic Chamber ( -40 Degree Celcius To 20 Degree Celcius ) Pt No . Niv Make:Swastik India Ltd , Electronic Weighing Machine With Capacity Of 300 Kgs Pt No . Ds-4165 Make: Indian , Profile Projector With Dro Pt No . Niv Make: Indian , Oven ( Range 0 Degree Celcius -300 Degree Celcius ) Pt No . Niv Make: Russian , Ultrasonic Filter Cleaning Rig Pt No . Uzu-2-Kor-U Make: Russian , Ultrasonic Filter Cleaning Rig ( Distilled Water ) Pt No . Uc-500W Make: Imeco Pvt Ltd , Pune , Sand Blast Machine Pt No . Hd 1-08070 Make: Redemaco Eng Pvt Ltd , Mumbai , Sonic Bond Master Pt No . Olympus , Fire Bottle Charging Rig Pt No . Zssp Make: Russian , Ultrasonic Flaw Detector With Probes And Charger Pt No . Ecoscan Ed1 Make: Indian , Magnetic Particle Test Equipment Pt No . Magna Flux Make: Olympus , Usa , Acoustic Impedance Test Equipment Pt No . Bondmaster 600 Make: Olympus , Usa , Ultrasonic Flow Detector Pt No . Epoch 650 Make: Olympus , Usa , Eddy Current Test Equipment Pt No . Nortech 600 Make: Olympus , Usa , Ultrasonic Thickness Meter Pt No . 38 Dl Plus Make: Olympus , Usa , Magna Check Testing Machine Pt No . Hw-001 Make: Olympus , Usa , Air Oil Purifier Rig Pt No . Aop-110 Make: Kirloskar
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Goa View Result →
22.
Educational and Research Institute #10634805 Price Bid
Supply , Testing , Installation And Commissioning Of Machinery Or Equipment Or Instrument Or Hand Tools Or Furniture Etc For Tendering Of Different Trade Course At Sagar Government Iti , Purrusottampur , West Bengal , 743373 - 1.01 Oral Language Lab For Digital Class :- Oral Language Software, Computer Systems In Lan, Ram-4Gb, Rom- 1Tb, Intel I3 Processor 1.02 High End Pcs ( Intel Core I5 7Th Gen 7400 3.0Ghz / 8 Gb Ddr4 Ram / 120 Gb Ssd / 1Tb Hard Disk ) 1.03 Projector ( Wireless 2D / 3D Full Hd 1080P, Lcd ) 1.04 Colour Printer ( Multi-Function Monochrome Laser Printer With Auto Duplex Printing ) 1.05 Plotter Printer ( Speed - One A0 Sheet Per Minute Resolution - 2400 X 1200 Dpi Line Accuracy- + 0.1% ) 1.06 Ups ( 1Kva / 600W, Battery Overload Protection ) And Latest Software For Laboratory. 1.07 It Lab And Workshop And Set Up Audio System ( 7.1 Channel Network Home Theater System ) 1.08 Router 1.09 Switch 1.1 Cat-5 / Cat-6 Lan Cable Connection For Broadband Setup. 1.11 Wifi Device ( ( 5Ghz 25Dbi 400Mm Air Max Cpe Outdoor Antenna With Reciever And Router ) 1.12 Network Monitoring And Security Software 1.13 Hd Quality Dvr Kit ( 16 Channels ) With All Accessories 1.14 Hd Quality Cctv ( 2 Mp Night Colorvu Ir Full Hd Bullet Night Vision Camera ) 1.15 Monitor ( Intel Core I5 7Th Gen 7400 3.0Ghz / 8 Gb Ddr4 Ram / 120 Gb Ssd / 1.0 Tb Hard Disk ) 2 Furniture 2.01 Student Chair ( Automotive Service Technician Levei- 4 ) 2.02 Pin Up Board ( Automotive Service Technician Levei- 4 ) 2.03 Student Table ( Automotive Service Technician Levet 4 ) 2.04 Almirah For Store Tools ( Fitter- Hydraulic And Pneumatic ) 2.05 Students Sitting Chair With Arm Rest ( Fitter- Hydraulic And Pneumatic ) 3 Book 3.01 Assessment And Test Tools For Day To Day Online Tests And Assessment 3.02 Digital Teaching Material Developed By Nimi / Other Than Nimi / Recognized By Msde 3.03 Books For Fitter-Hydraulic And Pneumatic Technician 3.04 Books For Automotive Service Technician Level-4 4 Facilities Of Trainees 4.01 Hiring Of Vehiile For Transportation Of Teinees To Indstry Pninises Fo. Ojt ( All Courses ) 4.02 Reimbursetnent Of Tensport Dlarges To Women Trainees ( All Courses ) 5 Fitter - Hydraulic & Pneumatic System ( Isc / Q0903 ) 5.01 Square Try 10 Cm .Blade Length: 10 Inch 5.02 Caliper Outside 15 .Cm Size: 300 Mm 5.03 Caliper Inside 15 .Cm Insize 30-320 Mm Inside Spring Caliper 5.04 Divider 15.Cm Type - Spring Divider Range - 0-150Mm Size ( L ) - 150Mm 5.05 Straight Scriber 15.Cm. Material: Steel Thickness: 2 To 5 Mm Overall Length: 215-216 Mm 5.06 Screw Driver 15.Cm.Screwdriver Size : 10X250 Mm 5.07 Hammer Ball Peen 0.22 Kg.With Handle. 5.08 Hacksaw Frame Fixed 30 Cm. Type Of Product : Hacksaw Frame 5.09 Sefety Goggles 5.1 Dot Slot Punch10 Cm. Point Diameter ( Inch ) : 10 5.11 Rule Steel 30Cm. To Read Metric. 5.12 Rule Steel 60Cm. Size : 60 Cm 5.13 Straight Edge 45 Cm.Steel. Thickness: 2-5 Mm. Hardness: 40-45 Hrc 5.14 Square Adjustable 15 Cm.Blade Standard Product 5.15 Sprit Level 15 Cm. 5.16 Taps And Dies Complete Set In Box B.A Set Contains: 5.17 Feeler Gauge 10 Blade. Material: Steel, Item Dimension: 20 X 20 X 5.0 Cm 5.18 File Setkit Contents Hand, Flat, Half Round, Round, Square, Three Square Files 5.19 Micrometer ( Outside And Inside ) Material : Stainless Steel With Carbide Measuring Faces Least Count : 0.001 Mm 5.2 Standard Sets Spanner / Slide Wrenches / Screw Drivers.Sales Package Set Of 12 Pcs Combination Type Open & Box End Material Carbon Steel 5.21 Gland Nut Wrench- Box Type.Fits Hydraulic Cylinders On Vehicles With Gland Nuts From 2-Inch To 6-Inch / 51Mm To 152Mm Reverses To Work On 17 / 64-Inch Or 21 / 64-Inch Pinholes Use With 3 / 4-Inch Square Drive Ratchet Or Breaker Bar Package Dimensions:20.828L X 14.223999999999998W X 2.286H 5.22 Pipe Flaring / Champering Tool.1Pc 7 Dies Tubing Pipe Flaring Tool 5.23 Pliers / Nose Pliers For Opening Lock Rings With Holes.Length ( Mm ) : 127 Length ( Inch ) : 5 Type Of Product : Needle Nose Plier 5.24 Pipe Wrench-Different Sizes.Pipe Wrenches Are Usually Sold In The Following Sizes ( By Length Of Handle ) : 10, 14, 18, 24, 36, And 48 Inches, 5.25 Portable Hand Drill ( Electric ) 0 To 6Mm. 10 Mm Chuc Kmaximum Capacity In Wood Is 20 Mm. Professional Powerful Heavy Duty Electric. Maximum Capacity In Steel Is 10 Mm 5.26 Minimesh Coupling Hoses With Pressure Gauges Of Different Ranges.Recharge Measuring Hose 1.5M R134a Car Air Conditioning Refrigerant Pressure Gauge Recharge Charging Hose 5.27 Flowmeters, Measuring Instruments, E.G.Screw Guage, V.C.Etc.Operating Voltage: Dc4.5 5V-24V Operating Current: 15 Ma ( Dc 5V ) External Threads: 1 / 2 High Amplitude = 4.6V Low Amplitude = 0.5V 5.28 Hydraulic Tube / Pipe Bendersize ( Inch ) : 5 / 16 Inch Thickness : 8-25 Mm Type Of Product :Tube Bender Size ( Mm ) : 8 Mm 5.29 O-Ring Remover / Fixercolor Black Extended Length 25.00 Centimeters Size Sae 5.3 O-Ring Making Kits Full Cure Time 6 Seconds Lower Temperature Rating -50 Degrees_Fahrenhite 5.31 Tig Welding Set For Welding Pipes.Model -Tig 315P Ac / Dc, , , 14 Kgs 5.32 Temperature Gun ( Laser Type ) Gm320 Non Contact Laser Lcd Display Digital Infrared ( Ir ) Temperature Meter Gun -50°C To 330°C 5.33 Basic Hydraulic Simulator As Per Market Standard 5.34 Basic Electropeumatic Simulator Type Of Product :Single Solenoid Valve Working Presssure :10 Kgf / Cm2 Temperature Range :5-50°C 5.35 Hydraulic Power Pack, Type Of Product : Hydraulic Bottle Jack Capacity :10 Ton Minimum Height : 200 Mm Maximum Height :385 Mm 5.36 Accumulator Set As Per Market Standard 5.37 Dryer And Frl Unitaeroflex R4000 Series B Port Size 1 / 2 Inch Filter Regulator Lubricator 5.38 Valve Cut Section ( Hydraulic And Pneumatic Voltage 220 - 315 Volt ( V ) 5.39 Thread Chaser-Gauge. As Per Market Standard 5.4 Pneumatic Air Compressorstages :Single Stage Tank Capacity : 18 Ltr Model No : Sc-01 Tank Size : 8X18 Inch 5.41 Allen Keys-Sets.Material :High Tensile Steel Surface Finish:Black Oxide Finish Sizes Available:1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 6 Automotive Service Technician Level-4 ( Asc / Q1402 ) 6.01 Sliding Hammer ( Berli Steel Handle Slide Hammer Ram Bar, Sledge Hammer, 1.5X50 ) 6.02 A / C Machine ( 124 Robin Air ) ( Oil Scale:5Kg, Compressor:1 / 3Hp Hose Meters ) 6.03 Hydraulic Jacks ( Threaded Ram Hydraulic Jack ( 101- 1000 Ton ) ) 6.04 Battery Charger ( Multi Use Battery Charger.Voltage:6-72 V, Charging Current:10-30 A ) 6.05 Lcd Projector: [ Type: Xga, Chipset: Dlp , Maximum Projection Distance: 40 Ft, Lamp Life: 15000 Hr Resolution: 1024X768 Pixel, Aspect Ratio: 4:3, Maximum Brightness: 3600 Lm, Hdmi Ports: Number Of Vga In:2 Smart Projector With Wifi, Bt Usb Reader Projector Screen:6 X4 Feet Inch Auto Lock Manual White Projector Screen ( Width 180 Cm X Cm Height ) Projector Screen Stand:Tripod Projection Screen 6Ft ( Width ) 4Ft ( Height ) , 84 Inches 4:03 Portable Indoor Outdoor Projector Screen Pull Up Foldable Stand ] 6.06 Vehicle Safety Stands ( Hydralic Floor Jack, Capacity: Ton, Minimum Heighe:140Mm, Maximum Height:470Mm. ) 6.07 Hard Toed Boots ( Starndard In Market ) 6.08 Air Blow Gun ( Nozzle Size:0.3 Mm ) Standered In Market 6.09 Hydro Meter ( Resolution:0.002Gm / Ml, Length:250Mm, Minimum Specific Gravity:1G / Ml, Maximum Specific Gravity:1.1G / Ml ) 6.1 Computer ( Processor Name- Core I5, Processor Generation- 9Th Gen, Ssd Capacity- 256 Gb, Ram- 8 Gb, Ram Type -Ddr4, Hdd Capacity- 1 Tb, Nvidia Geforce Gtx 1650, Number Of Cores- Operating System- Windows 10 Home, Graphic Memory Capacity:Gddr5, Graphic Memory Capacity:4 Gb ) Screen Size 39.62 Cm ( 15.6 Inch ) , Screen Resolution 1920 X 1080 Pixel ) 6.11 Diagnostic Tool ( Genesis Evo ) ( Genisys Evo 3875 Domestic With System 5.0, Genisys Evo Featuring The System 5.0 With Over 30 Million Experienced-Based Confirmed Fixes From Identifix On The Tool, Infotech Component Information Software And Automated System Test Includes Obd Ii Smart Cable, Manuals, And Carrying Case ) 6.12 Air Hoses- 20Mts ( Simple Six Feet ) 6.13 A / C Leakage Tester ( Ac Leakage Current Tester, Resistance Range:40-400 Degree ) 6.14 Pneumatic Tools ( Pneumatic Combination Stainless Steel Band 19Mm Strapping Tool, Semi Automatic ) 6.15 Bench Grinder ( Ralli Wolf Tg61ph, 265 W, 2950 Rpm, 230 V ) 6.16 Fender Covers ( Protects The Vulnerable Areas Of The Bodywork ( Front Grill, Fender, Headlights, Car Make Badges, Bumper ) Unique Wheel Access : Allows Servicing Of Brakes, Suspension. Transparent Front Lamp Sections Allow Lighting Tests. Radiator Section With Nylon Mesh Allows For Stationary Motor Testing Without The Risk Of Overheating. ) 6.17 Vehicle Support Stands ( Pair Of 6-Ton Jack Stands With 5443 Kgs Capacity Total ( When Used Together ) , Self-Locking Ratchet Means No Locking Key Is Necessary; Meets Asme Pase-2014 Safety Standard For Portable Automotive Service Equipment ) 6.18 Cotton Gloves ( Standard In Market ) 6.19 Gear Knob Covers ( Standard In Market ) 6.2 Car Seat Covers ( Ultra Soft Velvet Fabric With High Density Foam Padding, Spill And Stain Resistant Coating ) 6.21 2 Post Lift ( Double Cylinder Hydraulic Lift, Capacity:3T ) 6.22 Torque Wrenches ( Hydralic Wrench Set, Socket Wrench, Alloy Steel ) 6.23 Safety Goggles ( Standard In Market ) 6.24 Parts Washing Station ( Power:10-24 Kw, Weight:100-1000 Kg, 3 Phase, Diameter:250-1300 Mm Basket, Manual ) 6.25 Wheel Aligner ( Computerised 3D Wheel Aligner, Sensor Holder: 11 - 23 Inch, Display: 3 D, Power Supply: 90 - 260 Vac, Steering Angle: 35 Degree ) 6.26 Pullers ( 12 Pcs Bearing Separator Set Bearing Removal Tool Set Bar-Type Splitter Gear Puller Fly Wheel Tool Kit 35-50Mm 50-75Mm ) 6.27 Air Compressor ( 5 Hp Air Compressor, Discharge Pressure ( In Bar ) : 4 Bar ) 6.28 Steering Covers ( Standard In Market )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
23.
Agriculture #10607176 Price Bid
Disposal / Sale Of Unserviceable Scrap Items, Unserviceable / Obsolete Large Machineries And Wooden Logs On “As Is Where Is Basis” Available At Icar-Ninfet, 12, Regent Park, Kolkata – 700 040 - Unserviceable Scrap Items - Unserviceable Scrap 1. Computer And Accessories 2. Cot 3. Sofa 4. Ac 5. Ceiling Fan 6. Pedestal Fan 7. Refrigerator 8. Microwave Oven 9. Induction Stove 10. Pressure Cooker 11. Toaster 12. Mixer Grinder 13. Geyser : Crompton Greaves 14. Geyeser: Ramson 15L 15. Canon Fax M / C L-140 16. Computer: Hp Pavilion 17. Printer: Hp Laserjet 1150 18. Printer: Hp Laserjet 1160 19. Computer, Ups, Web Camera, Anti Glare Screen Etc 20. Ups 21. Washing Machine 22. Winch Cutter 23. Digital Camera 24. Ups 25. Electronic Weighing Balance 26. Ups 27. Twin Folding Strength Tester, Make: Bluestar 28. Jute Stick Grinder, 29. Air Oven M / S B& Taflock Ltd M / S Kamala Scientific Works 30. Cutter Type Pulveriser 31. Mixture Machine 32. Tensile Strength Tester M / S Blue Star Ltd 33. Winch Dyeing Machine 34. Bursting Strength Tester 35. Electronic Balance 36. Iron Removal Filter 37. Temperature Meter 38. Computer Monitor 39. Cpu 40. Battery: Amaron Quanta ( 12V, 26Ah ) 41. Longmuir Blodget Film Deposition Unit 42. Spin Coater 43. Hp Computer 44. Damaged Metal Windows And Damaged Ms Shutter Parts 45. Bending Roller M / C 46. Blower M / C 47. Calculator 48. Tool Post Grinding 49. Bench Drill M / C 50. Welding & Cutting Set 51. Electrical Gun Drill 52. Air Blower 53. Jute Composite Chair 54. Refrigerator 55. Chair 56. Reading Table 57. Mixed Type Scrap Materials ( Iron, Aluminium & Plastic ) Like Damaged Tube Sets, Meters, Main Switch, Wire, Cables Etc., Jute Composite Table Top 04 Nos. 58. 10 Kva Diesel Engine Operated Kirloskar Ta-2 Air Cooled Hand Start Control Panel, Accessories 59. Damaged Window Shutter Metallic Parts. 60. Miscellaneous Assorted Scrap ( Broken Chairs, Damaged Items: Corroded Roof Sheets, Damaged Door & Window Shutters And Frames, Damaged Water Pipes, Broken Glass, Empty Cartoons, Corroded Grill, Damaged Mattresses Etc 61. Old Window Grill - Unserviceable / Obsolete Large Machineries - 1. Hydraulic Press Alongwith Compressor, M / S Peeco Hydraulic Pvt Ltd 2. Disc Refiner ( Without Table ) , M / S Sprout Woldrond Co. 3. Hydraulic Hot Press 4. Briquetting Press For 32 Dia. Briquettes With Hammer Mill ( Grinding ) With Inclined Screw Along With Gear Box With Motor. Model No. : P-32100 5. Briquetting Machine Parts For Briquetting Machine Model No. : P- 32100 6. Briquetting Machine Parts – Pneumatic System And Reciprocating Feeding System For Briquetting Machine. Model No. : P-32100 7. Alternator With Diesel Engine Set And One Common Panel Box ( 100 Kva / 80Kw ) 8. Water Treatment Plant 9. Lathe M / C 10. Hmt Universal Milling M / C 11. Generator 15 Kva ( Transferred From Extension Section To Eng. Section ) 12. Callaghan Machine ( A.E.Callaghan ( U.K ) 13. Circular Weaving Machine Lino Type C Wooden Logs 1. Dry Wooden Logs Lot-1 ( In Front Of Canteen ) 2. Dry Wooden Logs Lot-2 ( In Front Of Machine Shed ) 3. Dry Wooden Logs Lot-3 ( Rear Approach Way Of The Electrical Substation ) 4. Logs And Branches Of Siris Tree
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 13
West Bengal View Result →
24.
Housing Urban and Rular Development #10572835 Price Bid
Tender For Strengthening Of 1 Road In Kallakurichi Block In Kallakurichi District; 1 Strengthening ofVilambar Manthaiveli - Narthankurichi Eri Roadin Km 0/0-2/245 2 Clearing the scrub jungles including all labour charges for all labour charges etc complete. 3 Earth work excavation and depositing on bank within initial lead and lift in hard gravelly soil for Cutting sidedrainetc, complete. as per SS20 A 4 Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m 5 Collection & Supply& Spreadingof US gravel including cost & conveyance and labour charges for stacking etc complete. 6 Km 0/0-1/0 7 Km 1/0-2/0 8 Km 2/0-2/245 9 Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete. 10 Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it. 11 Providing and laying Tack coat over WMM surface(treated with primer) using 2.5Kg of bitumen emulsion RS-1for 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., 12 Providing and laying Bituminous Concrete to 25/30/40 mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30/ VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP using( Vibratory Roller) 13 Supply and Fixing of HM Stones 14 Supply and Fixing of KM Stones 15 Cost for documentation of Photograpic Charges 16 CD Works @ CH:200,770 17 Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B 18 Collection and supply of M sand and filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard specifications 19 Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 20 Cement concrete 1:3:6 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 21 Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 22 Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. 23 Below Sill Level 24 Above Sill 25 Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum 26 Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works 27 Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete, 28 Providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and technical specifications 29 Providing and fixing weepholes of 100 mm dia. PVC pipes of required lengths including cost and conveyance of all materials to work site, cost and labour etc complete 30 Providing and fixing Tar Paper including labour etc complete. 31 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
25.
Housing Urban and Rular Development #10572828 Price Bid
Tender For Strengthening Of 1 Road In Kallakurichi Block In Kallakurichi District; 1 Strengthening ofThatchur - Vilambar Road to Pattaiyar Kadu Roadin Km 0/0-2/690 2 Clearing the scrub jungles including all labour charges for all labour charges etc complete. 3 Earth work excavation and depositing on bank within initial lead and lift in hard gravelly soil for Cutting sidedrainetc, complete. as per SS20 A 4 Picking 5 cm to 10 cm old metalled surface and sectioning - 1 sq.m 5 Collection & Supply& Spreadingof US gravel including cost & conveyance and labour charges for stacking etc complete. 6 Km 0/0-1/0 7 Km 1/0-2/0 8 Km 2/0-2/690 9 Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete. 10 Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it. 11 Providing and laying Tack coat over WMM surface(treated with primer) using 2.5Kg of bitumen emulsion RS-1for 10sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., 12 Providing and laying Bituminous Concrete to 25/30/40 mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30/ VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP using( Vibratory Roller) 13 Supply and Fixing of HM Stones 14 Supply and Fixing of KM Stones 15 Cost for documentation of Photograpic Charges 16 CD Works 17 Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B 18 Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 19 Cement concrete 1:3:6 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 20 Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum 21 Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing column plinth beam, beams, roof slabs, staircase steps, bed blocks, critical pier etc using mild steel sheets of size 90 x 60 cm and 10 guage stiffened, welded with mild steel angles of size 25mmx25mmx3mm for boarding laid over silver oak (country wood) scantlings of size 10cm x 6.5cm spaced of about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre complete complying with standard specifications and as directed by departmental officers including conveyance of all materials to site and proper centering etc complete. 22 Below Sill Level 23 Above Sill 24 Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum 25 Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works 26 Collection and supply of gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete, 27 Providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and technical specifications 28 Providing and fixing weepholes of 100 mm dia. PVC pipes of required lengths including cost and conveyance of all materials to work site, cost and labour etc complete 29 Providing and fixing Tar Paper including labour etc complete. 30 GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column BB for all works in this package}
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
26.
Housing Urban and Rular Development #10564353 Price Bid
Tender For Widening Of Road Harpalu To Rampura Via Bhojan Km 0/0 To 23/0; 1 Part A Earthwork 2 Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201.By Mechanical Means In area of non-thorny jungle 3 Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3 4 Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300-1 and 300-2 as per MoRTH Specification Clause 305.3 5 Construction of reference bench mark (1 No.), working bench mark (4 Nos.) and near all drainage structures and bridges (as per direction of Engineer-in-charge), reference pillar/ burgees @ 50m interval on both side of formation width including marking of centre line, setting out curves, recording of levels, white washing and lettering etc. complete as per MoRTH specifications cl. 109. 6 Part B Metal and Metalling 7 Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202 By Mechanical Means Bituminous Courses 8 Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per MoRTH Specification Clause 202 By Mechanical Means Granular Courses 9 Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately 10 Granular Sub-Base with Close Graded Material (Table:- 400-1) Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means. For Grading-I Material 11 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, layingin uniform layers in sub-base/base course on a well prepared sub-base and compacting with smoothwheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400-12 & 400-13 and MoRTH Specification Clause 406. with Average lead 5 Km 12 Part C BT Work 13 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 14 Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503. 15 Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 percentby weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 505 complete in all respects. Bitumen (VG-30) Grading - II (26.50 mm (Nominal Size)) 16 Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6per centof mix and filler,transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 507 complete in all respects for Grading-II(13 mm nominal size) Bitumen (VG-30) 17 Part D Cement Concrete Pavement 18 Construction ofun-reinforced , plain cement concrete pavement M30 (Grade), thickness as per design, over a prepared sub base, with 43/53 grade cementas per Clause 602.2.2 , coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a in fullyautomatic Batching Plant andtransported to site intransit mixer for having continous agitated mixer, manufactured as per approved mix designincluding pumping of R.M.C. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using Fixed Form Paver and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawingand MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments (Dowel Bars will be paid seprately). 19 Part E Shoulder Work 20 Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means. G III 21 Construction of granular sub-base cum (excluding granular material) by spreading in uniform layers with Tractor Mount Grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MoRTH Specification Clause 401. 22 Part F Road Furniture 23 Providing and fixing Mukhya Mantri Sadak Yojana/ Mahatma Gandhi Rajya Sadak Yojana informatory sign board with logo for roads funded by State road fund having M.S. Definition plate of 1.60 mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. The logo shall be made out of 1.6mm thick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45 cm x 60 cm, 60 cm below ground levelincluding lettering / writing and painting etc. complete in all respect.as per MoRTH Specification Clause 801. 24 Providing and Erecting typical Citizens information Board as per approved drawing & specification made of two MS sheet of 1.6 mm thick each of size 900mm x 750mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M-15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. 25 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and MoRTH Specification Clause 801 600 mm equilateral triangle 26 Supply & Fixing of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8mm dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom 27 Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2 mm thickwith areanot exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board 28 Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat,making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as perIRC : 99-1988 3.70 meter wide and 10 cm high for general traffic 29 Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 801 30 5th Kilometre Stone (precast) 31 Ordinary Kilometer Stone (Precast) 32 200 m stone (precast) 33 Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160 C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 34 Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.as per MoRTH Specification Clause 804. 35 Part G Protection Work 36 Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. Ordinary soil Upto 3 m depth 37 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 38 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 R.C.C grade M 20 39 Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and MoRTH specification Clauses 1009,1600 & 2202 40 Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRTH specification Clauses 1409, 2204.4, 2206.4 & 2706 41 Part H Culvert/Drain 42 Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. Ordinary soil Upto 3 m depth 43 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 44 Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 2905. 45 600 mm dia 46 300 mm dia 47 Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.Ordinary soil Upto 3 m depth 48 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10, Nominal mix 1:3:6 49 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 20, Nominal mix 1:2:4
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Rajasthan View Result →
27.
Drinking Water Supply and Sanitation #10562597 Price Bid
Tender For Water Supply Scheme For Augmentation Of Uwss Kushalgarh District Banswara Including 05 Years Om After 01 Year Of Defect Liability Period Under Amrut 2, Water Supply Scheme for Augmentation of UWSS Kushalgarh, District Banswara including 05 years O&M after 01 year of Defect Liability Period under AMRUT 2.0 Sl. No. Item Description 1 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item andshall not be paid separately. 2 100 mm 3 150 mm 4 200 mm 5 Providing, lowering, laying and jointing in trenches, standardlengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing,disinfection, commissioning etc. complete as per technicalspecifications and direction of Engineer-in-charge of following classand diameter. (excluding earth work) .Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.Supply may be in coil or straight length in 6 M/12 M. 6 HDPE PE-100PN-6 7 90 mm 8 Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete (excluding flanged jointing wherever required) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer.Note : E/w to be measured and paid separately. 9 MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) 10 Providing Household Tap Connection as per technical specification andapproved drawing as per relevant IS code (amended up to date) fromHDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premisesby using PP mechanical Integrated saddle with inbuilt flow controlvalve made out of SS316 designed for 5 LPM discharge at 0.5 barpressure , not exceeding the flow of 7 LPM at 2 bar and acompression elbow, moulded in single piece/ fusion welded(Complete job) including digging out suitable size of pits and trench forlaying service line in all kinds of soil; depositing and refilling of pit &jhiri with watering & ramming /compacting in layers and disposal ofsurplus excavated soil as directed with in a lead of 100 meter ;providing & fixing of all fitting duly approved in accordance withspecification for potable water including GM Full-way Valve (IS:778Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipePE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Threelayered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and aboveground level using PPR-C pipe with standard PPR fittings/ GI pipes inthe premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe linecomplete required for making of service connection complete in allrespect including labour charges . The service line should be laid atleast 45 cm below ground level.Note: Road cut and restoration is not part of this item and paidseparately. 11 For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr. 12 Road cutting for house hold service connection in minimum trench width wherever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CCM-30 grade as per specification and direction of Engineer in charge.. 13 Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. 14 Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. 15 3 core 16.0 Sq.mm 16 Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade withaluminium conductor Armoured of IS:7098-I/1554-1 approved make in groundas per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thickunder layer of sand, second Class bricks covering, refilling earth, compactionof earth, making necessary connection, testing etc. as required of size. 17 Armoured Cable16.0 Sq. mm 4 core 18 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I.B class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance asrequired. 19 Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B class),Steel tube as per IS:1239 or amended up to date and zinc coating as per IS4736, threaded and double flanged (welded) on both ends and two number25x3mm MS flat welded on both ends between pipe & flange, rubber washer &nut bolts etc. complete in all respect. 20 65 mm dia 21 Construction and commissioning of RCC INTZE type Over Head Service Reservoir of following capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: -a) Topographic survey, preparation of site contour plan, conducting SBC testand its approval from departmentbefore construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR.The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil.d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall.e)Conducting successfully hydro test and water tightness test as per I.S. code.f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome.g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc..h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab.j) Providing and fixing water level indicator (float type).k) Providing and fixing of hand railing all around the balcony, top dome and staircase consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.o) Lighting arrestor consisting of providing and fixing of 2 Nos.of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm.p) CI/DI puddle collar shall be fixed in the bottom dome/ slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately. 22 Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 18 M 23 400 KL 24 Construction of RCC (Flat slab type) Clear Water Reservoir of following capacity as per the Scope of work and Technical specification, consisting of the following main activities: -a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase. c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soll fill.d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall.e) Successful hydro test and water tightness test as per 1.S. code.f) Providing and applying three coats of anti-carbonation paint on the roof Slab. g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.h) Providing and fixing SS-304 ventilator, 55 304 manhole frame and cover and 55 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).i) Providing and fixing MS ladder from ground to top slab.j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide. k) Providing and fixing of 150mm wide water bar for the construction joints in the container.l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately. 25 Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE-2,3 & 4 26 150 KL 27 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required suchas duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope ofwork. 28 For OHSR 29 100 mm 30 200 mm 31 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required suchas duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope ofwork. 32 For OHSR 33 200 mm 34 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipeline including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth includingconsolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soil 35 In All Typeof Soil 36 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming ofbottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth includingconsolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required . 37 Ordinary rock 38 Hard rock(blasting prohibited) 39 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CCcutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. 40 Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 50 metres as directed by Engineer. 41 Bituminous courses 42 Granular courses 43 Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting,guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. 44 Providingand laying in position cementconcrete in specified gradeover prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line andchamberwork.MeasurementforCCworktobemade asperstandard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified,complete work as per technical specification and scope of work. 45 M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 46 Providing, installation, testing and commissioning of Centrifugal Monoblockpump set conforming to IS 9079 , 2 pole motor operating at synchronisedspeed of 3000 RPM with requisite MOC impeller, priming funnel, cock,suitable flanges at suction and delivery side. Pump shall have common shaftfor pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall besuitable for working at various discharge and head requirements as perscope of work. Pump shall be erected on C.C. foundation / cross channels /RSJ frame block with suitable foundation bolts grouted in C.C. foundationblock etc. complete in all respect as per specification, scope of work anddirection of Engineer in Charge of following power rating, suitable forprescribed duty conditions mentioned in TD. 47 Centrifugal Monoblock Pump set (Single Stage) 48 11.0 KW (15 HP) 49 Providing, installation, testing and commissioning of submersible Monoblock pump set conforming to IS 8034 and 2 pole motor operating atsynchronised speed of speed 3000 RPM, with water proof winding. Pumpshall be suitable for various delivery head and discharge with stainless steelshaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and withwater lubricated bearing to accept entire hydraulic thrust. Supply, with cableguard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. Thepump set shall be suitable for direct coupling, with suitable suction strainer.Pump should have suitable discharge out let as per manufacturers design.Antithrust stream lined non return valve shall be provided with the pumpand minimum 6 m submersible copper conductor cable in single / doublerun and 2 pairs of suitable size erection clamp 10 mm thick shall be providedwith each pump etc. complete in all respect as per specification, scope ofwork and direction of Engineer in Charge of following posion : Less than 1.6mm Variation in thickness: Less than 3.2 mm) 50 submersibleMonoblock Pump set (Single Stage) 51 15.0 KW (20.0 HP) 52 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesstraight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside,Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steelInsertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 53 Manually Operated CI Sluice valve of Class PN-1.0 54 100 mm HW 55 200 mm HW 56 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amendedup to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float GuideHBT1.HP Orifice- HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material,labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work. 57 Class PN 1.0 58 40 mm 59 50 mm 60 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanisedrubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367(Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitablesupport structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 61 Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 62 100 mm 63 150 mm 64 200 mm 65 Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specificationscompleteofthefollowingsizesincludingall jointing material,costofalllabour,testingandcommissioning Technical Specifications and as per direction of Engineer. Class PN 1.0 66 100 mm dia. 67 150 mm dia. 68 200 mm dia. 69 SITCSTAR DELTA Starter type LT Panel of followingrating:all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated withangleframeincludingotherancillaries(Insulators, AcrylicSheet , Backlight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Neutral Links , Spiral , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminium Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge. 70 STAR DELTA STARTER 11.0 KW (15.0 HP)- :For 2 motors (1 W+ 1S)I/C -MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) andO/G-MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3 Duty(2),2NO+2NCAux.Block(2),ThermalOverloadRelay(9-13A)(2),Control MCB6ASP10KACCurve(2),SinglePhasePreventer(2),Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2) 71 STARDELTASTARTER 15.0KW (20.0HP) : For2motors(1W+ 1S)I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter96*96mm(0-500V)(1),VoltSelectorSwitch(1),Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue-1)(1),ControlMCB6ASP10KACCurve(3) andO/G-MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2),SinglePhasePreventer(2),IndicatingLights(Red-1,Green-1,Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/DTimer(2) 72 Construction of boundary wall of Brick/ stone masonry as per enclosed GAdrawing, scope of work and technical specifications complete work in allrespect. Brief details of boundary wall parameter is as below:1. Depth of foundation- 900 mm.2. PCC in M-10, width -900 mm and thickness 100 mm,3. Stone masonry in CM: 1:6 section of foundation above PCC, 600mm (W )x 450 mm (D) and 450 mm (W) x 450 mm (D)4. Superstructure work: Stone masonry in CM: 1:6, W-300, height-1650mm,/ Brick work in CM: 1:6 W-230 mm, height- 1650 mm.5. Cement mortar pointing on Stone masonry and cement mortar plaster20 mm thick on brick masonry in CM 1:6.6. Expansion joint shall be on every 30 mtr.7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall beprovided.8. Pillar for main gate 350x350 mm in size is part of boundary wall.9. Cement paint of approved colour in 3 coat shall be done. 73 Providing and fixing steel, gate, grating and grills made of angles, tees,square bars, flats or black pipe with hold fast and fitting complete as perdesign and drawing including cutting welding and fabrication with primingcoat of red oxide and two coat of enamel paints. 74 Construction of Pump house of RCC framed structure with pump pit in RCCwalls as per scope of work and technical specification complete work in allrespect including electrical works for indoor and outdoor lighting and fans,rain water drainage, sanitary, plumbing, monorail/ EOT crane etc. completeas per direction of Engineer-in-charge. The GA, structure, electrical,sanitary, P&ID, SLD to be prepared by the contractor and submitted todepartment for approval for earth quake zone II. 75 Pump House with Monorail arrangement 76 ConstructionofRCCSluicevalvechamberfordifferenttypeofvalves includingearthworkexcavation,100mmPCCM15 aslevellingcourse, RCC M25 grade for base slab, side wall & cover slab , including cost of steelreinforcement,formwork,Pre-castslabs,plasticencapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as perspecifications and standard drawings and as per direction of Engineer-in-Charge. 77 For Class-A loading 78 Sluice valve chamber of size1.13m x0.85m x1.27mfor pipe size-upto100mm 79 Sluice valve chamber of size1.17m x0.95m x1.415mfor pipe size-from 125-to-150mm 80 Sluice valve chamber of size1.26m x1.185m x1.82mfor pipe size-from 200-to-300mm 81 Construction of RCC Air valve chamber for different type of valvesincluding earthwork excavation, 100mm PCC M15 as levelling course,RCC M25 grade for base slab, side wall & cover slab , including cost ofsteel reinforcement , form work, Pre-cast slabs, Plastic encapsulatedCI/MS Foot Rest, MS flats for the support of pre-cast, proper curing ofconcrete work complete in all respect as per specifications andstandard drawings and as per direction of Engineer-in-Charge. 82 Air valve chamber of size0.9m x1m x1.695mfor air valve size-from 50 mm-to-80mm 83 SITC of Bulk Flow Meter with removable mechanism class B confirming to ISO:4064:2005/ IS: 2373of approved make of following dia sized pipelines andspecificationscomplete: Media:Water(Clear),Temp.50deg.,Pr. rating:PN16,Protectiontype:IP-68, BodyMaterial:IS-210Gr.FG-200, AccuracyClass:ClassB(±2%@Nominalflowrate),MagneticDrive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In- Charge.Note: Rates are exclusive of tail piece / dismantling joints and earth work. 84 BFM 200 mm 85 Design, construction, commissioning & testing of Non Mechanical RapidGravity Filter Plant of capacity as under. This work includes constructionof RCC receiving chamber, baffle channel, flocculate, clarifier, collectingchannel, filter beds , operation gallery, clear water chamber, channel,chlorination chamber, Back wash tank, pipe system for carrying rawwater from Pump House to inlet of RGF, clear water from Plant to CWR,De-sludging system including providing pipe system from clarifier ,flocculate & back wash water chamber to existing storage tank, overhead back wash tank, back wash pumps (1W+1S) set with piping system,air blowers (1W+1S) as per design, interconnection of raw water, clearwater, sludge pipes etc. including allied works such for construction,commissioning of system as defined in scope of work, technicalspecifications and provisions of CPHEEO manual at various water supplyschemes 86 Up to 40 KLH capacity 87 Providing, laying, spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant atOMC, carriage of mixed Material to work site, spreading in uniformlayers with motor grader on prepared surface and compacting withvibratory power roller to achieve the desired density, complete asper MoRT&H specification clause - 401 including all material, labour,machinery, lighting, guarding and maintenance of diversion.Grading - I Material 88 Providing, laying, spreading (with paver finisher only) andcompacting wet mix macadam (WMM) base course comprising ofgraded stone aggregate and granular material conforming toMORT&H specifications (Table 400-II) in layers of equal compactedthickness each consolidated, including pre-mixing the material withwater at OMC in mechanical mixer (Pug Mill), carriage of mixedmaterial by tippers to site, laying in uniform layers in base course ona well prepared sub-base/ base course and compacting with powervibratory-roller to achieve the desired density complete as perMoRT&H specification clause - 406 including all material, labour,machinery, lighting, guarding and maintenance of diversion. 89 Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen Container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 90 Extra for additional bitumen emulsion used in above item for every 1 kg per 10 sqm 91 Providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per Table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including Cost of anti-stripping compound Minimum 1% in Lime/Cement as per design wherever required), including loading of material with F.E. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat. 92 With Bitumen VG-grade 30 93 Providing laying and consolidation Semi Dense Bituminous Concrete, as per Design Mix (approved by Engineer), on prepared surface with specified graded crushed aggregates as per table 500-15 for wearing coarse including loading of material with F.E. loader, hot mixing of stone aggregate, filler and bitumen (including Cost of anti-stripping compound Minimum 1% in Lime/Cement as per design wherever required) heating and mixing in in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 KN pneumatic tyred roller with TP = 0.7 Mpa, to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 508 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. 94 25-30 mm compacted thickness (Grade-2) using Bitumen VG-grade 30 @ 5% (percent by weight of total mix) 95 Bored cast-in-situ R.C.C. pile with cutting / Drilling for anchoring of pile into rocks wherever firm rocky strata is available, shall be done upto desired depth (minimum 1.50 m) as per drawings, specifications and as directed by Engineer. Bore hole shall be cleaned properly before concreting. No, distinction shall be made for penetration through hard rock or rock socketing with design mix concrete (M-35) using batching plant, transit mixer and concrete pump excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. as per clause 1100, 1600 & 1700 of MoRT&H Specification including all material, labour and machinery. 96 450mm dia pile 97 Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum 98 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 99 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 100 M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 101 Supporting block of size 2m, 1.2m 102 For height 10m 103 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix 104 Providing M-30 grade concrete by usingcement as per codal provision instead ofM-20 grade design mix. 105 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 106 Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 107 Columns, pillars, posts and struts etc. 108 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 109 Cost for Basic Service Charges, Administration and Management, Running of Operation, Maintenance and Repairs including Preventive Maintenance, Cost of material required for maintenance & repairs, Cost of Lubricants, Consumables, Spare Parts (if the spare parts supplied to PHED are used in emergency)as per Scope of Work & terms & conditions of contract for 05 year after defect laibility period of one year DLP (except power feeder, IEC & miscllenous provision) for Water Supply Project 110 1st year 111 2nd year 112 3rd year 113 4th year 114 5th year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
28.
Road Transport and Highways #10484067 Price Bid
Supply, Installation And Commissioning Of Plant And Machinery Supply, Installation And Commissioning Of Plant And Machinery At Astc , Plant And Machinery , Tyre Changing Equipment , Nitrogen Generator , Air Compressor , Pneumatic Impact Wrench , 1 Impact Socket Set ( Molybdenum ) , Riveting & De-Riveting Machine ( Hydraulic ) , Brake Drum Lathe Machine , Engine & Gear Box Lifting Crane , Heavy Duty Universal Hydraulic Trolley , Portable Grease Pump -15Kg , Portable Grease Pump - 30 Kg , Hydropneumatic Jack , Vehicle Washer- Hcv , Wheel Aligner , Battery Charger , Hydraulic Trolley Jack , Trolley Gearbox Lifter , Spray Paint Gun , Welding Machine
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Assam View Result →
29.
Public Administrative Department #10483600 Price Bid
Requirements Of Machinery For Mangaon Nagarpanchayat.-2 Jcb Excavator 3 Dumper 6Cum 4 Pipe Cutter With Operator 5 63 Kva Generator 6 Desludging Pump 7 Pneumatic Driler 8 The Total Value Of Schedule4
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Maharashtra View Result →
30.
Agriculture #10475273 Price Bid
E-Tender For Procurement Of Machinery Equipement For Regional Exotic Cattle Breeding Farm Under The Deptt Of Livestock Farm Complex, College Of The Vety Sciences And Ah, Rk Nagar, West Tripura, For The Year 2024-2025 , Fixed Type Milking Machine- , Fixed Type Milk Machine-- Specification- Should Contain 04 Nos Of Milking Clusters And 04 Nos Of Milking Buckets Should Be Made Up Of Latest Technology With Features Like Hybrid Filtration, Hepa Caliber Filtration, Antibacterial Filtration, Washable Permanent Filter, Low Noise Emission Technology Motor. Vacuum System: Vacuum Tankmaterial To Be Of Hot Dip Galvanized Rust Resistant, Capacity- Min 15 Liters, Transparent Lids & Drain Valve Facility With Wall Mounting Brackets (1 No), Electric Motor: 2 Hp Single Phase, 2800 Rpm With On Off Switch And Over Load Protection Relay, Ce Standards (1 No), Vacuum Pump: - To Be Direct Coupled With Motor Oil Lubricated, 340 Lpm (1 No), Vacuum Line- 50 Mm 6 Kg Density, Pvc Pipe With Clamp, Bend And Fittings Make Finolex (Up To 200 Ft), Vacuum Regulator - Spring Loaded Vacuum 44 To 48 Kpa Adjustable (1 No), Vacuum Gauge - Dial Type, 0 To (-) 100 Kpa /(-) 360 Mm Hg Range (1 No), Vacuum Valves / Taps – Made Up Of Metallic, (12 Nos) Milking Can: To Be With Lid, Quantity – 04 Nos, Aisi 304 Made, 1 Mm Thickness In Body, Capacity – 25 Litres, Seamless Finish Without Joint With Can Carrying Handle Flow Controlled Milking Arrangement: 4 No Pneumatic With Diaphragms, Can Operate Automatically Low Vacuum In Stimulation & Stripping And Normal Vacuum In Milking Phase Based On Milk Let Down In Cattle (4 No), As Per Iso 5707 Pulsation Rate To Be 60 Pulse Per Minute, Pulse Ratio - 65:35 (65 Milking Phase & 35 Massage Phase), Pulsation And Vacuum Should Be Checked At Field Level Milk Tube – 2.5 M, Short Pulsation Tube With Each Teat Cup Is To Provided, Double Pulsation Tube To Be Provided – 01 No. For Each Can, Milk Tube Should Be Non-Toxic, Food Grade, Comply Bfr/Fda Standards. Pvc Transparent Tube To Be Provided, Declaration Submitted, And Phthalate Free. Milking Cluster/ Law: 04 Nos, Cluster Weight – 2600 Gm, Claw Volume – 150 Cc, To Be Transparent, Flow Rate - 9 Lit / Min, Should Have Air Admission Hole, Liners To Be Non Toxic, Food Grade, Comply Bfr/Fda Standards. Pvc Transparent Tube Provided, Declaration Submitted, Phthalate Free, To Be Provided 1 Ses Of Cleaning Brush Include 1 Long Brush For Milk Tube, Cleaning And Short Brush For Rubber Liner Cleaning. Brush With Ss Handle To Be Provided, Ss Teat Cups – To Be Made Up Of Ss 304 Suitable To Liners And To Be Properly Fitted, Should Supply Instruction Manual. Installation And Commissioning Of The Machine With Training Of Farm Workers Is Essentially Required. Accessories To Be Provided: Vacuum Pump Oil 5 Litre, Hygenious Basix 5 Litre, Teat Dip Cups 1 Pc, Calf Bottle 1 Pc.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Tripura View Result →
31.
Communications and Information Technology  #10457552 Price Bid
Supply Installation Testing Commissioning And Equipment For Gold Ornament Cluster Supply, Installation, Testing, Commissioning And Trail Run Of Machinery And Equipment For Gold Ornament Cluster Under Mse Cdp Scheme. , Gold Cluster Ornament , Supply And Installation Of Faceting And Milling Machine (Cnc Machine) For Bangles And Wedding Bands Double Head With Variable Speed Control, Computerizes Six Axis System. Specification: Number Of Head Horizontal & Vertical 02. Type Of Main Centre Universal 03. Number Of Axis (5+2) ‘X Longitude, ‘W D-Tilting, ‘Z Vertical For Depth, ‘R 360° Horizontal Rotary For Angular Position & Machining, ‘H Horizontal Spindle, ‘V Vertical Spindle, 04. Travel Of Axis ‘X Longitude 60 Mm, ? Rotating For Job - Continuous Rotary/Index, 2 To 400 Divisions, ‘W Tilting (Semi Rotary) Degree -40° To 90°, 05. Type Of Optional Accessories For Optimum Operation. Optional Accessories Can Be Fitted For Flat And Half Round Bangles And, Bands (Rings) 06 Milling Spindle Speed Horizontal (Servo Motor) Vertical (Hf Ac Built-In Motor With Pneumatic Tool Change Water Cooled Spindle). Min. 1000 Rpm To Max. 9000 Rpm, Min. 10,000 Rpm To Max. 60,000 Rpm ‘? Rotary,07. Spindle Motor Power Vertical, Horizontal, 1.5 Kw, 0.4 Kw,08. Electrical Supply 220V Ac / 50 Hz, 09. Total Required Electrical Load 3 Kva, 10. Air (Pneumatic) Supply Dry And Oil Free Air With 6 Bar / 87 Psi And 4 Cfm /120 Lpm Flow Rate, 11. Dimension (L X W X H) 94 X 97 X 156 Cm. 37 X 38 X 61 Inch.12 Floor Space Required (L X W X H) 155 X 161.5 X 156 Cm. 61 X 63.5 X 61 Inch,13 Net Weight With Standard Accessories 327 Kg Approx., 15 Shipping Dimension With Standard Accessories (L X W X H) Box-1 - 75 X 92 X 120 Cm. 29.5 X 36 X 47 Inch, Box-2 - 119 X 122 X 181 Cm. 47 X 48 X 71 Inch., Box-3 - 32 X 63 X 42 Cm. 12.5 X 25 X 16.5 Inch. To Include Additional Supporting Machine Tools And Materials. Fully Automatic And To Include Software Installation, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Udh - 701 Vekaria Make Or Its Equivalent. , Supply And Installation Of Bangle And Ring Turning Machine Specification: 1.5 To 3 Specification: Bangle Turning Machine (Without Any Accessories)- With Standard Inside Bangle Turning Socket - 1 Pc.- With Standard Outside Bangle Turning Mandrel - 1 Pc.- Bangle Turning Tool Holder - 1 Pc. Bangle Nylon Collets Set- Set Of 33 Inside Turning Collets (Size From 2” To 3”) And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries Or Its Equivalent. , Supply And Installation Of Bangle And Ring Profiling Machine 2 To 3 No.S 17 To No. 49 With Bangle Stretcher /Pep Tools. Specification: Combined Double Head (Horizontal And Vertical) *Simple To Calculate Divisions Up To 120 Parts*Robust Base With Mounting Holes For Hassle Free Operating*Dual Motor (1 For Each Head) (0.17 Hp/ 2800 Rpm)*Spindles (Rpm) - Horizontal – 5600 / Vertical – 6500* Motor 0.25 Hp* Machine Dimension 76X76x82 Cm, Bangle Nylon Collets With 1 Bangle Holder For Diamond Cut Faceting, Ring Nylon Collets With 1 Ring Holder For Diamond Cut Faceting, Ball Attachment, Half Ball Collets Set Of 6, Chain Attachment And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries Model Sku: 16.0701 (Bangle Ring Turning Machine) Or Its Equivalent. , Supply And Installation Of Laser Engraving Machine 12000Mm/Sec, Cooling Systemspecification: Platform - Safety Enclosure, Operating Mode - Mopa Pulse Fiber Laser, Wave Length - 1064 Nm, Pulse Frequency - Upto 2000 Khz, Output Power - 20 Watt Mopa Pulse Fibre Engine, Focusing Optics (Nm) - 100, 163, 254, Cooling Capacity - Fully Air Cooled, Heat Sink, Profile Laser (Optional) - Visible, Red Beam Pilot Laser, Laser Safety Compliance - Fda (Cdrh), Csa, Ce.With High Speed Fiber Laser Marking Technology Marking/Deep Engraving /Cutting On Precious Metals, With Dust / Fumes Collection Unit.Pulse Fiber Laser (Mopa Engines) And Including Cost And Conveyance Of All Material, Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: 3802 Series Laser Marker With Rotary & Laptop Of Laser Star Make From Italy Or Its Equivalent. , Supply And Installation Of Cnc Router Machine With 3D Printer With Supporting Printing Material Specification: Jewelers Engraving 3-4 Axis With Zczb Wax Printer/ Stablizer /Struller/ Chemical /Computer Set /Heater Cleaning Tools/Back Up Ups. Molding Method - Mjp, Molding Size - 294*211*144 Mm, Printing Mode - Xhd:1200*1200*1600 Dpi:16, Dimension Accuracy - + 0.04 Mm/20 Mm, Power Supply - Ac 220-240 V, 50 Hz, 3 Kw, Overall Size - 1415*790*1160 Mm, Overall, Weight - 380 Kg, Package Size - 1700 *1000*1400 Mm, Application Software - 3D Print Data Support Format - .Stl/.Slc, Operation Environment - 18-28 ° C / 30-70 % Humidity And Including Cost And Conveyance Of All Material, Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work. , Supply And Installation Of Digital Weighing Machine - Set Of 10 Machines With Calibration Set Up Specification: Weighing Capacity: 62 G, Resolution: 0.1 Mg, Calibration: External, Display Type: Clear Reverse Backlit Lcd Display, Standard Interface: Rs -232 C Repeatability: 0.1 Mg, Weighing Pan: Ø90 Mm And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: A&D Japan Or Its Equivalent. , Supply And Installation Of Ball Making Machine With Full Set Of Sheet Drawing Of Pipe Making, Soldering, Sheet Striping Machine, Hammering With All Standard Accessories Specification: Power: Single Phase, 220 V, Weight: 158 Kg, Dimensions: 45 X 76 X 106 Cm Suitable For Production Of Small To Large Sized Round, Long Oval, Long Barrel Shaped Balls From Strip Or Tube By Changing Dies, Size: 1.8Mm - 8 Mm, Ac Power 2 Hp Motor, 80-100 Balls Per Minute With Oil Pump, Weight 350Kg, Material Die Steel, Suitable For Production Of Balls Or Other Shapes Chain In Small Dimensions By Changing Dies From 0.60Mm Up To 2.00Mm, Ac Power 1 Hp Motor, 80-100 Links Per Minute With Oil Pump, Weight 300Kg. (Approx), High Grade Die Steel Material. With Separate Sheet Metal Drawing Machine Setup, To Manufacture Hallow And Solid Gold Ball Shapes, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Laser Welding Machine 130 Joule Capacity With 150 Joule Cap.Specification: Source Type - Nd: Yag (Flashlamp), Wavelength - 1064 Nm Output Power (Watts) - 60 W /80 W, Maximum Peak Power - 11 Kw, Pulse Frequency - 0.5 - 50 Hz, Beam Diameter - 0.05 - 2.00 Mm, Burst /Speed Welding - Optimized To Energy Values, Max Pulse Energy - 180 J, Pulse Performance Profile Technology - Exclusive Integrated Software, Soft Touch Resonator Technology - Beam Profile Technology (Optional), Supply Circuit - 120 V Or 230 V (+ 10 %)50/60 Hzfunctionality: 1. Automatic Energy Save Mode, 2. Integrated Preventive Maintenance Alerts, 3. Multi Language System Display, 4. 99 Memory Settings, 5. Preprogrammed Application Parameters Ceramic Cavity New Technology, 6. Inbuilt Cooling System Specially Designed For Jewelry Industry, And 7. Less Maintenance And More Efficient Power Supply Technology., And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Workmake/Model: Laser Star Brand Pedistal/Stablizer Or Its Equivalent , Supply Of Gold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes) Specification: Dies With Different Sizes And Its Supporting Consumable Materials For Die Punching Machine. 10 Mm (3/8 Inch) Letter & Number Punch Set (0 To 9) & 27 Letters, Type Of Product: Punch, Weight: 995 G, Size: 10 Mm, Material: Carbon Steel, Usage: Professional I.E., On Gold And Silverand Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries / Kravetto Or Its Equivalent , Supply Of Gold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes) Specification: Dies With Different Sizes And Its Supporting Consumable Materials For Die Punching Machine. Material Stainless Steel, Model Name/Number Devi: Embossing Dies, Weight 50 Gm Gross Weight 70 Gm, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/ Model: Eagle Industries/ Shree Ambika Tools Or Its Equivalent. , Supply Of Gold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes)Pattern Dimensions 3Mm - 50Mm, Material D2 D3, Usage/Application Bangle Ring Jewellery Making As Per Required Designs Quantity - 400 Pieces And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries/ Shree Ambika Tools Or Its Equivalent. , Supply Of Gold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes) Pattern Type: Round, Pattern Dimensions: As Per Requirements, Usage/Application: Coin Making, Material Stainless Steel, Customization: As Per Requirements, Diameter: 1Oo Mm, Finishing: High Chromium Double Polished, Hardness: Tempered And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries/ Shree Ambika Tools Or Its Equivalent. , Supply Ofgold And Silver Dies Specification: Sizes Starting From 15X1 To 15.3/4X1, Quantity:1200 (Sizes Dais As Per Gold And Silver Dais As Per Sizes) Pattern: Type Square, Pattern Dimensions: As Per Requirements, Usage /Application: Coin Making, Material: Bronze And Hard Ss, Customization: As Per Requirements, Diameter: 1Oo Mm, Finishing: High Chromium Double Polishedhardness: Tempered And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Eagle Industries/ Shree Ambika Tools Or Its Equivalent. , Supply And Installation Of Digital Vacuum Pressure Casting Gold Melting Machine Capacity: 2.4Kg, With Digital Display And Cooling System.Fully Automatic Casting Machine Brand/ Reiacetech Wax Mono Endura / Indigenous Furnace 6 To 8 Flask Capacity/Matrix Investment Mixer 5 Flask/ Steam Machine /Ultra / De-Waxing/Water Jet/Manual Wax Injector/ Tools /Materials For Casting/ Cylinders Powder / Stabilizer Set For All The Machine And Support Materials. Specification:Power: 11 .0 Kw, Frequency: 6 Khz, Ac Line, (50/60 Hz), 3 Phase:400 V + 10%, Melting Temperature (Max): 1300 ° C, Crucible Capacity: 3 Kg Au, Crucible Volume: 208 Cm3, Flask Size (Min): 87 Mm X 127 Mm, Flask Size (Max): 120 Mm X 300 Mm, Vacuum Pump: Included , Weight: 290 Kg (639.3 Lb), Dimensions: 70 Cm X 101 Cm X 135 Cm, Inlet Water Temperature: 35 ° Cfunctionality: Vacuum Casting Machine With Auto/Manual Technology Operating Process With High Pressure Vacuum Motor. Add On Machines For Pre Casting And Post Casting: Reiacetech Wax Injector From Italy Or Its Equivalent. Ingenious Furnace 6 To 8 Flask Capacity With 4 Side Heating Capacity. Indeginous Investment Mixer 5 Flask Capacity. Steam Machine For Gold Tree Cleaning, Manual Wax Injector Ultra Sonaic Machine, Steam De-Waxing Machine, Tool And Consumables For Casting Unit, Stabilizer Set, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Gold Melting Machine With Digital Display And Cooling System Capacity: 2Kg With Digital Display And Cooling System, Two Models With Chiller From 50 Gm To 2 Kg, Melting Capacity / Rio Grande Melting Machine With Digital Display With Graphite Crucible Sets And 50 Gm To 500 Gm Capacity (2 Or 3 Qty Required) Specification: With Ceramic Based Crucible With Digital Thermocouple Heating Sensor Display Screen, Power - 440 V 3 Phase, Water Cooler - 35 Littre (In Built), Weight - 120 Kg, Dimensions - 36 X 30 X 45 And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Gold Refinery Machine 2Kg Charged Up To 6 Kg Per Day With Digital Display And Cooling System Should Have Excellent Thermal Insulation To Prevent Loss. Specification: Gold Refining Unit, Power Supply: 400 V / 3 Phase, Power: 0.3 Kw, Dimension In Mm: 1200 X 670 X 1120, Weight: 80 Kgs. To Have Low Running Costs, Fully Automated Process With Process Control And With Fumes Filter & Exhaust Filter And Including Cost And Conveyance Of All Material, Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Koras Refining Unit With Auto Stirrer Set Up With Acrylic Material Or Its Equivalent. , Supply And Installation Of Hydraulic Die Cutting Machine: Capacity:25 Tons, 150Mm Stoke Cylinder, 20Mm/Sec Fast Forward Speed Specification: Hydraulic Die Cutting Machine: Capacity:25 Tons, 150Mm Stoke Cylinder, 20Mm/Sec Fast Forward Speed, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: High Pressure Hydraulic Die Cutting Machine From Hk Brand Or Its Equivalent. , Supply And Installation Of Mesh Chain Machine With Standard Accessories Specification: Material: Mild Steel, Power 4.0 Kw, 5.5 Kw, Voltage 380 V, Dimension (Lxwxh) 3800Mm X 3000Mm X 1400Mm, Different Shapes Of Box Chain Making Machine With Auto Setting And Manual Operation Process. Die Replacement Or Fixing Process To Be User Friendly And To Produce Higher Production In Short Time, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Modern Chain Machines / Vekaria Or Its Equivalent. , Supply And Installation Of Box Chain Making Machine With Standard Accessories Specification: Material: Mild Steel, Power 4.0 Kw, 5.5 Kw, Voltage 380 V, Dimension (Lxwxh) 3800Mm X 3000Mm X 1400Mm, Different Shapes Of Box Chain Making Machine With Auto Setting And Manual Operation Process. Die Replacement Or Fixing Process To Be User Friendly And To Produce Higher Production In Short Time, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Modern Chain Machines / Vekaria Or Its Equivalent. , Supply And Installation Of V-Chain Making Machine With Standard Accessories Specification: Motor: 0.50 Hp Pmdc Motor & Drive Speed Control Rpm 0 – 1500. 180 Wt. 1 Year All India Warranty. Table: Machine Cabinet Steel Mattel & Weight 49Kg. Electronic Panel: Dc Drive Full Electronic Panel• Sensor (Auto Cut)• Heater (37 Wt., Temperature 800O). Features: Automatic Machine For Venetian Chains, Variable Speed Controller, Forced Lubrications System With Oil Tank And Electronic Brake Sensor, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Best Indian Heavy Duty Machine/ Vekaria Brand Or Its Equivalent. , Supply And Installation Of 12 Pass Wire Drawing Machine With Full Set Of Standard Accessories Specification:Max. Wire Diameter (Guage/Mm) = 20/0.91 To 18/1.22.•Min. Wire Diameter (Guage/Mm) = 36/0.91 To 36/0.19.•Main Motor = 1.5 To 2 Hp.•Cooling Motor = 0.25 Hp.•Machine Weight =225 To 345 Kg. Heavy Duty Sturdy Metal Frame That Holds The Motor.•Transmission Drive.•Speed Control Drive.•Cooling Liquid Tank And Sprayer.•The Unwinding Reel.•The Motorized Winding Reel With Adjustable Clutch.•Steel Palermo For Longer Durability Of Machine. And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Hk Brand Or Its Equivalent. , Supply And Installation Of Sheet And Wire Drawing Machine With Standard Accessories With Heavy Duty Motor Capacity And Auto Stopper Technology Specification: Wire & Sheet Rolling Mill For Gold & Silver • Roller Length 200 Mm X 100 Mm. • Heavy Duty Machine • Bronze Bushings • 5 Hp Electric Motor • Three Phase Power Supply • Hardened Ground Steel • Roller Mouth Openness: 20 Mm. • Weight 800 Kg, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Hk Brand Or Its Equivalent , Supply And Installation Of Laser Marking Machine Specification: Karat Mark: Laser Marker (20 / 30 W Power) Specification: Laser Power: 20 W-30 W, Laser Wavelength: 1064 Nm, Frequency Range: 20 - 120 Khz 1-600 Khz, Beam Diamter: 7+1 7 + 0.5, Format Supported: All Vector Files And Image Files (Bmp, Jpg, Gif, Tga, Png, Tif, Ai, Dxf, Dst, Plt), Scan Field: 100 X 100 Mm Scan Speed <<7000 Mm/S, Power Regulating Range: 10 -100 %, Cooling Method: Air Cooling, Operating Environment - 0° C - 40 ° C (Non -Condensing), Electricity Demand - 220 V (110 V)/50 Hz (60 Hz), Size & Weight - Around 24 X 17 X 15 In, Gross Weight Around 22 Kgs, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make /Model: Alpha Laser Marker (20/30 W Power) , Supply And Installation Of Xrf Machinemistral Sdd, Item Note: Xrf Karat Meter (Sdd) Stabilizer / Support Specification:Intended Use: Energy Dispersive X-Ray Measuring Instrument (Edxrf) To Determine Thin Coatings, Trace Elements And Alloys. Element Range Aluminium (13) To Uranium U (92) - Up To 24 Elements Simultaneously. Designs Bench Top Unit With Upward Opening Hood, Measurement Direction: From Bottom To Top, X-Ray Source, X-Ray Tube Micro Focus Tube With Tungsten Target And Beryllium Window, High Voltage Three Steps: 10 Kv, 30 Kv, 50 Kv, Aperture (Collimator) 4X Changeable: 00.2 Mm (7,9 Mils), Ø 0.6 Mm (23.6 Mils), Ø1 Mm (39.4 Mils). Primary Filter: 6X Changeable: Ni, Free, Al 1000 ?M (39.4 Mils). Al 500 ?M (19.7 Mils). Al 100 ?M (3.9 Mils), Mylar 100 Um (3.9Mils)Measurement Spot Depending On The Measuring Distance And On The Aperture In Use, The Actual Measurement Spot Size Is Shown In The Video Image. Smallest Measurement Spot Approx. 0.3 Mm (11.8 Mils) And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Fisher Xrf Sdd Brand Or Its Equivalent. , Supply And Installation Of Assay Balance: 0.001 Mg Accuracy With Mettler Toledo Scale Je3002 G/M Gold Scale 3.200 With Digital Display. Specification: Weight Capacity - 6000 G Resolution - 1000 Mg Repeatability - 0.01 G Calibration - External And Internal Display Type - Vacuum Fluorescent Display (Vfd) Weighing Pan - Ø150 Mm Standard Interface - Rs -232 C And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Mettler Toledo Scale Or Its Equivalent. , Supply And Installation Of Sartorius Analytical Balance Machine With Digital Display With All Standard Accessories. Specification: Weight Capacity - 6000 G Resolution - 1000 Mg Repeatability - 0.01 G Calibration - External And Internal Display Type - Vacuum Fluorescent Display (Vfd) Weighing Pan - Ø150 Mm Standard Interface - Rs -232C And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Mettler Toledo Scale Or Its Equivalent. , Supply And Installation Of Sartorius Precision Balance Machine With Digital Display With All Standard Accessories. Specification:Weighing Capacity: 62 Gresolution: 0.1 Mgcalibration: Externaldisplay Type: Clear Reverse Backlit Lcd Displaystandard Interface: Rs -232 Crepeatability: 0.1 Mgweighing Pan: Ø90 Mm And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Mettler Toledo Scale Or Its Equivalent. , Supply And Installation Of 50Gm, 100Gm, 200Gm, E2 Class Wire Weight With Display Attachment Item Note: 50Mg. E-2 Class Wire Weight With Nabl Calibration Certificate. Specification: Calibration Units With Stainless Steel Measuring Exact Weight Standards For Weighing Machines Block. Weights Intended To Ensure Traceability Between National Mass Standards (With Values Derived From The International Prototype Of The Kilogram) And Weights Of Class E2 And Lower. Class E1 Weights Or Weight Sets Shall Be Accompanied By A Calibration Certificate, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Tools And Equipment For Sampling Balling Pliers, Couplers, Scraping Tools, Tongs, Forceps, Rolling Mill Etc. For Complete Assay Set Up Please The Link As Provided Below, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of Furnaces, Scrubbers, Parting Tray Etc. Item Note: For Hallmarking Full Setup Center Required. (3 Phase Power, Pollution Clearance Certificate Bis Approval Fee, And All Things) Specification: Annealing Furnace With 220V / Single Phase Along With Supporting Materials. Assay Supplies: Assay Laboratory Spare Parts And Consumables, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work For Complete Assay Set Up Please The Link As Provided Above Against Item No. 29 , Supply And Installation Of Safety Equipment: As Per Project/Customer Requirements..I)Cctv Cameras With Night Vision2 Megapixel Ip Cameras With Motorized Verifocal& Pixel Zoom ; Progressive Scan Cmos 1/2.8 Or 1/3Format; Focal Length 2.8 To 12Mm; Zoom Range – 4.2X Varifocal; Multiple Simultaneous Stream; Streams First Stream : Full Hd, 1~30Fps; 1280X720, 1~30 Fps; 704X576, 1-30Fps, Second Stream 704X576, 1~30Fps; 352X288 10~30Fps; Video Compression 32 Kbps ~ 16 Mbps, Support Cbr/Vbr; H.264 Version 3, High Profile Encoding And Motion Jpeg Format Support; 1920(W) X 1080(H) Or Higher Active Pixels; Built-In Ir With 2 Or More Epled; Sw Supported Digital Wdr ; Auto Blc; Sd Memory Slot Upto 32Gb Class 10; Minimum Illumination Icr Colour 0.1 Lux (F1.2 Agc On) B/W 0.001 Lux (F2 Agc On); Shutter Speed 1/25-1/10,000S ; Multiple Resolution 4Cif(704X576), Cif (352X288); 12Vdc / 24Vac / Ieee802.3Af Poe (Rj-45) Support; Supporting All Network Protocols (List The Supporting Protocols); 10/100 Base-T, I/O Audio Support, Audio Compression G.711; Multi-Level User Access With Password Protection; Ip Address Filtering; Https Encrypted Data Transmission; Ieee 802.1X Port-Based Authentication For Network Protection; Ip Address Filtering Https Encrypted Data Transmission; Operating Temperature -10 Deg C To +55Deg C,Onvif Compliant, 36 Months Comprehensive Warranty. Ce, Fcc, Emc & Rohs Certification; And Ul Certification For Core Adaptor Are Mandatory; Onvif Complaint Make: Cp-Plus/Cp-Unc-Tb21zl6s-Vmds27125/Panasonic/Pi-Spw 201Dl/Bosch/ Nti 50022-A3s. Integration Of Cctv System To The Central Server Unified Command Centre Solution Platform (Uccs) At District Police Headquarters Command Center(Dphcc) In Coordination With The Police Department / Designated Agencyand Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work , Supply And Installation Of 32 Channel Network Video Recorder(Nvr) : Supply, Installation, Testing And Commissioning Of 32Ch Embedded 4K Nvr 4Sata Expandable Up To 40Tb, Audio Input & Output, Two Way Communication Supported, G7.11 Audio Format Support, 320Mb Recording Throughput, 16 Alarm Inputs & 4 Outputs, Rs485, Esata And Rs232 To Be Supported With Maximum 16 Users, Op. Temp -10 To 50 Deg. C, Ndaa Compliant, Ul/Ce/Fcc Certified, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Makes: Cp-Plus/Panasonic/Pi-Spw 201Dl/Bosch/ Octavision/Hikvision. , Supply And Installation Of Wallmounting Network Rack Supplyand Fixing Of 6 U Wallmounting Network Rack With Power Spike Including All Accessories Etc., Complete. And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make:Hcl / Vall , Supply And Installation Of 8Port Poe Switch Supply & Fixing Of Small Business 8 Port Gigabit Poe Managed Switch, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work. Make:Netgear/Dlink , Supply And Installation Of Safety Equipment: As Per Project/Customer Requirements. Specification: Lan Cable Cat -6 Utp Cable And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Makes : D Link / Amp / Molex / Legrand / Krone, , Supply And Installation Of Safety Equipment: As Per Project/Customer Requirements. Specification: Hard Disk 8 Tb And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Makes : Segate/ Sv-35/Toshiba. , Supply And Installation Of Air Conditioner A/C 2.0 Tonne A/C With Low Power Drive Module.Supply And Transportation Of Inverter Model Cool Type Split Ac Unitwith High Wall Mounted Single Split 100% Copper Indoor And Outdoor Condencing Unit Hermetically Sealed Compressor Suitable For Operation On 230V, 50Hz, 1Phase Ac Supply Capable Of Performing Heat Cool Dehumidifying Air Circulating And Filtering With Cooling And Condensing Units With 3.0 Mts Of Copper Piping, Insulation Kit And 4 Mts Of 4 Core Copper Flexible Chord (Voltage Range 160- 264 Volts) And Cordless Remote Control With Warranty Of Compressor For 5 Years And Comprehensive Maintenance For 2 Years2.0 / 1.8 Tr 5 Star Capable Of Delivering 21600 Btu/Hr And Above With Operating On Refrigerant R-32 / R-410 And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Makes: Daikin / Toshibha / Carrier / Blue Star / Hitachi Or Equivalent , Supply And Installation Of Computers: Core-I7 10Th Gen Processor, 8Gb Ram, 1Tb Hdd, Windows 10 Pro. Specification: General :Wired Usb Keyboard & Optical Scroll Mouse 1 X Ps/2 Combo Port 2 X Usb 3.2 Gen 1 Ports 6 X Usb2.0 Ports 1 X Rj-45 Port 1 X Hdmi Port 1 X Vga Port 1 X Audio Port (Line Out/Line In/Mic In) 1 X Pci Express X16 Gen 3.0 Slot 1 X Pci Express X1 Gen 2.0 Slot 1 X Audio Port (Line Out/Line In/Mic In) 450W 19V/0.84A 80Mm X 310Mm X 395Mm 510Mm X 360Mm X 182Mm 12.5 Kg (Total Pc) Ce, Rohs Table Top 3 Years Warranty Cpu, Monitor, Keyboard & Mouse, User Manual, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Standard Make , Supply And Installation Of Ups 10 Kva System (8 Kwatt ) Specification:Input Voltage 80 / 400 / 415 Vac; 3 Phase, Ninput Voltage Range ± 15%Input Frequency 50 / 60 Hzinput Frequency Range ± 10%Input Power Factor > 0,85Output Power Factor 0,8Output Voltage 380 / 400 / 415 Vac; 3 Phase, Noutput Frequency 50 Hz / 60 Hz (Selectable)Battery Type No Maintenance Batterybattery Unit 30Charge Voltage 405 Vdcbattery Charge Time 8 Hours To 90% Capacity After Deep Dischargebattery Test Automatic And Manuel Battery Test Systemover Load Capacity 100% ~ 125% Load 10 Minutes; 125% ~ 150% Load 1 Minute; > 150% Load On The Bypassdimension Wxhxd (Mm) 490 X 1200 X 680Weight ~ 240 Kg., And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Standard Make , Supply And Installation Of Generator (20Kva Dg Set) Specification: Power: 20 Kva (16Kw) Fuel Consumption (At 100% Load): 5.09 Ltrs/Hr Fuel Tank Capacity: 63 Ltrs Phase: 3 Phase Dry Weight (Kg): 720 Frequency: 50 Hz Engine: 2 Cylinder, In-Line 4 Stroke, Radiator Cooled Engine, Electrical Starter Motor With Soft Start Engagement Feature, Battery Charging Alternator. 1 X 12 V Dc Battery, And Including Cost And Conveyance Of All Material,Labour Charges For All Operations, Hire And Operational Charges, Incidental Charges, Excise Duty & Customs Duty If Any Applicable, All Taxes But Excluding Gst Etc., Complete For Finished Item Of Work Make/Model: Standard Make
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Telangana View Result →
32.
Housing Urban and Rular Development #10375878 Price Bid
Tender For Widening And Renewal Of Bansur To Fatehpur Road Km 0/00 To 5/000 - PART - A : ROAD WORKClearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per MoRTH Specification Clause 201. By Mechanical Means In area of non-thorny jungle 2 Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections. 3 Construction of embankment with approved materials deposited at site obtained from roadway cutting and excavation from drain and foundation or other structures graded and compacted to meet requirement of Tables 300-1 and 300-2 as per MoRTH Specification Clause 305.3Note :- Deduct if excavated earth as per item No. 3.5 (ii)is used and pushedfor filling in embankment. 4 Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300-1 and 300-2 with a lead upto 50 m as per MoRTH Specification Clause 305.3 5 Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per MoRTH Specification Clause 305.4.3 6 Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately 7 Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means. For Grading-I Material 8 Providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per Table 400-1,400-2 or any other course material as per design mix, as per CBR in sub base course including premixing the material at OMC in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader F.E loader on a prepared base and compacting with vibratory roller to achieve desired density (as per I.S.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[MoRTH specification : Clause 401]. By mechanical means. For Grading-III Material 9 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening & binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 1 as per MoRTH Specification Clause 404.Using Crusher Broken Aggregate By Mechanical Means 10 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per MoRTH Specification Clause 404. using Crusher borken aggregate By Mechanical Means 11 Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base(WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MoRTH Specification Clause 502 12 Providing and applying tack coat with Bitumen emulsion (RS-1)using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. 13 Providing and laying bituminous macadam with hot mix plant using crushed aggregates ofgrading as per Table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolledto achieve the desired compaction as per MoRTH Specification Clause 504.Bitumen (VG-30) 14 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using Viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per MoRTH Specification Clause 510. Case - IIBy Mechanical Means Bitumen (VG-30) 15 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per MoRTH Specification Clause 511 By Mechanical Means Case - II:Type B Bitumen (VG-30) 16 Construction ofun-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 602.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a concrete mixer of not less than 0.5 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed Side Formwork (steel channel, laying and fixing of 150 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using water finishing to lines and grade as per drawingand MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments (Dowel Bars will be paid seprately) 17 Providing and Fixing of Dowel Bars of Mild Steel confirming to IS : 432 of specified length and diameters as per MoRTH Specification IRC 15 & 58 including cutting, placing in position across transverse joint with proper spacing, providing with PVC sleeve complete as per drawing, technical specification and as per direction of the Engineer-in-charge. 18 Interlocking Concrete Block Pavement with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks (measurements shall be made inner to inner side of edge blocks)Providing and Laying of Interlocking M-30 grade Concrete Block Pavements having thickness 80 mm as per drawings and as per IS 15658:2006.and all materials shall conform to MoRTH Specification Clause 602 with M-30 Grade 0.30 Mtr x 0.30 Mtr x 0.15 Mtr Edge Blocks. Category B : Dentated only two side like I,Z,T shape as per IRC:SP:63-2004 19 PART - B : CD WORKEarthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial. Ordinary soil Upto 3 m depth 20 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 21 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 R.C.C grade M 20 22 Stone masonry work in cement mortar in foundation complete as per drawing and MoRTH specifications Clauses 1402, 1405, 2102 & 2104. Random Rubble Masonry In 1:4 cement mortar 23 Pointing with cement mortar (1:3) on Stone work as per drawing and MoRTH specification Clauses 1406 and 2200 24 Providing PCC M-20 architectural coping on the top of wing wall, return wall etc. complete as per drawing and MoRTH specification Clauses 1313, 1411 and 2206.6 50 mm thick 25 Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and MoRTH specifications Clauses 1009,1600 and 2102 26 Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granularmaterial in single row includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 2905. 300 mm dia 27 Providing and fixing of Reinforced Ferro cement Drain cover designed for class AA loading duly marked on cover with adequate steel reinforcement having thickness 75 mm to 150 mm anti- corrosive bitumen painted M.S. plate Rim and on M.S. lifting hooks admixture like plasticizer bond improving compound shrinkage resistance compound abrasion resistant complete as per approved design etc.for drain Opeining Size 451 to 700 mm Standard Drain Cover Size 1000mm x 800mm x 100mm 28 PART - C : Road FurnishingReinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 801 Ordinary Kilometer Stone (Precast) 29 Reinforced cement concrete M15grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MoRTH Specification Clause 801 200 m stone (precast) 30 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and MoRTH Specification Clause 801 900 mm equilateral triangle 31 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and MoRTH Specification Clause 801 600 mm equilateral triangle 32 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and MoRTH Specification Clause 801 800 mm x 600 mm rectangular 33 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as perdrawings and MoRTH Specification Clause 801 900 mm side octagon 34 Providing and erecting direction and place identification retro-reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 2 mm thickwith areanot exceeding 0.9 sqm supported on RCC Post 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801,upto 0.9 sqm size board 35 Providing and erecting direction and place identification retro- reflectorised sign asper IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 2 mm thickwith areaexceeding 0.9 sqm supported on RCC Posts 100 mm x 100 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801 36 Providing and fixing Mukhya Mantri Sadak Yojana/ Mahatma Gandhi Rajya Sadak Yojana informatory sign board with logo for roads funded by State road fund having M.S. Definition plate of 1.60 mm thickness frame to steel hollow dsection of 75mm x 75mm, 2.5m long stove enamelled paint with hold fast including paint logo as per approved design and colours. The logo shall be made out of 1.6mm thick circular plate duly framed with MS angle 25x25x5 mm on back and fix on 1200mm x 150mm rectangular steel base plate 1.6mm thick, the base of circular shall be plain at the junction of base plate. The size of definition plate shall be 1500x600mm and embedding the posts by M-15 cement concrete block45 cm x 45 cm x 60 cm, 60 cm below ground levelincluding lettering / writing and painting etc. complete in all respect.as per MoRTH Specification Clause 801. 37 Providing and Erecting typical Citizens information Board as per approved drawing & specification made of two MS sheet of 1.6 mm thick each of size 900mm x 750mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 SWG sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete M-15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by Engineering incharge. All MS will be stove anmeled on both side lettering. Figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. All sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per Specification. 38 Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160 C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. 39 Supplying and Fixing of Cat’s Eye made of aluminium alloy size 75x100x22 mm having 21 biconvex lenses embedded in circular disk of ABS plastic on each side. 40 Supply of Hazard Marker made out of 2 mm thick M.S. sheet size 300x300x3 mm framed with angle iron 25x25x3 mm and fixed on channel posts 75x40x6 mm and hold fast at bottom whole body is painted in white stoving enamel and 6 Nos., 5 cm dia reflective sheet on white reflective background with additional border of 1.25 cm all arount it. 41 Supply & Fixing of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8mm dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom 42 Providing and laying rounded hump type speed breakers for crossing speed 25 km/h as per IRC design including providing and applying bitumen emulsion tack coat,making speed breaker in designed profile with bituminous macadam, providing seal coat type B for sealing the voids and marking chequered pattern with thermoplastic paint complete as perIRC : 99-19883.70 meter wide and 10 cm high for general traffic 43 Construction of Foundation / Inaugration Pedastal in 23 cm thick Brick masonry in CM 1:4 of size 1.20m x 1.80m above ground level with adequate foundation including providing and fixing of Granite stone of size 0.75m x0.60m with engraving letters and figures,cement plaster,white washing etc. complete as per direction of Engineer in charge. 44 PART - D : ROAD SIDE PLANTATIONSupply & Planting of shady plants ( Neem, Peepal, Goolar, Jamun, Imli or other specified ) along road side including the following activities:- 1. Preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage. 2. Supply of plant at site of two years of age & height more than 1.50 Mtr 3. Supply of dry manure ( Farm yard manure organic ) 4. Supply of Insecticides 5. Digging of pits size 60x60x60 cms. Including removal of stones. Manuring application of insecticides & watering at least 15 liter per plant after planting. 6. Half brick Circular tree guard in second class bricks, internal dia 1.25 meter and height 1.20 meter above ground and 0.20 meter below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1Cement : 6 Sand) and the intermediate courses being in dry honey comb masonry, as per design complete. 7. Watering to plants.8.Maintenance of plants by the contractor including of pits/bids preparation of Thavala Hoeing weeding etc. & application of insecticides etc. & security. If the plant die during maintenance contractor has to replace same height plant at his own cost.Note:- SD Shall be refunded after counting of plants on completion of defect liability period of 5 years
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
33.
Educational and Research Institute #10372706 Price Bid
Procurement Of Equipment, Instrument, Machineries, Tools Etc. Related To Laboratories Procurement Of Equipment Related To Laboratories And Workshops Of Mechanical Electrical Civil Chemical Engineering And Science Humanities Departments Of Hooghly Institute Of Technology Hooghly-Strain Gauge Trainer Kit - Gauge Factor : 2.1 Maximum Bearable Weight : 500 Gm, Cantilever Material : Stainless Steel, Bridge Configuration : Full Bridge Display : 3½ Or 4 Digit Ledwith User Manual 2 Measurement Of Temperature Using Thermocouple, Rtd, Thermistor, Ad950 - Transducers With Electronic Instrumentation Transducers : Thermocouple ( K - Type ) , Thermocouple ( J - Type ) , Thermistor ( Ntc ) , Rtd ( Pt 100 ) , Semiconductor Sensor ( Lm 335 ) And Semiconductor Sensor ( Ad 590 ) With User Manual 3 Bourdon Tube Type Pressure Gauge - Bourdon Tube Type Pressure Gauge, Pressure Range Upto 10, 000 Psi, Accuracy Upto + / -0.25%, With Pumping System 4 Flow Control System Using Mass Flow Meter, Single Loop Controller And Control Valve - Set Up Should Consist Of ---Mass Flow Meter, Single Loop Controller, Control Valve ( Glove ) , Transmitter Should Be Installed At The Upstream Of Control Valve, Controlling Facility By Controller, Continuous Water Recycling Facility, Table Mounted Set Up Preferable With User Manual 5 A / D & D / A Converter Trainer Kit - Analog To Digital Converter • 8-Bit Descrete Adc • On-Board Signal Generator With Adjustable Amplitude Levels • On-Board Led Bank To Observe Digital Outputs • Power Supply : +5V, ±12V Gnd • Interconnection Is Provided By 2Mm Connectors • Experimental Manual Digital To Analog Converter • 8-Bit Binary Weighted Resistors Dac • 8-Bit Ladder Type D To A Converter • Onboard Switches Are Provided For Digital Pattern Generation • 8-Bit Digital Inputs Ranges From 00 To Ff • Extensive Experimental Manual Is Provided With The Kit 6 8051 Based Advanced Microcontrollertrainer - 8051 Microcontroller Trainer Kit;Based On Intels 8051 Microcontroller 12Mhz With • On Board Power Supply • Rechargeable Ni-Cd Battery • Ascii Keyboard Interface • Programming Interface With Pc • Compiler And Cross Assemblers For Programming In C, • Lcd Display, 8051 Usb Programmer, 16*2 Lcd, Light Sensor Module ( Ldr ) , Tsop Sensor Module, 4*4 Matrix Keypad, Aa 6 Cell Holder, Burge Strip F-F Connectors, • 32 K Or Higheruser Ram. ( Expandable ) • Serial I / O Through 8251 Usart • Parallel I / O Lines Available Through Two 8255 Chips • 3 Channels Of 16 Bit Timer / Counters From 8253. 8254 • Adc & Dac Interface Module • Stepper Motor Interface • Square, Triangular, Staircase Wave Generator Interface Module • Dc Voltage, Current Measurement Interface Module • Zero Crossing Detectors Interface Module • Users’ Guide • Cd - Required Software, Usb Cable, Microcontroller & Its Interfacing Book With Application Projects, Cd - Required Software 7 Microcontroller Development Kit - 8051 Development Kit With Accessories And Software 8 Solar Photovoltaic Cell Characteristics Trainer Kit - 12V Solar Module With Suitable Arrangement Of Halogen Lamps 500W, Digital Dc Voltmeter And Ammeter, Lux Meter And Variable Resistive Loadwith User Manual 9 Flux Meter ( Magnetic ) - Integrating Type Digital Fluxmeter, With 3&Half Digit Digital Display, 4- Ranges Of Measurements Indicating Flux Values From 0.1 Kmt ( Kilo Maxwell Turns ) To 2*105 Kmt 10 Digital Storage Oscilloscope ( 70 Mhz ) Detailed Technical Specifications:- A ) No. Of Channels : 2 Or 4 B ) Bandwidth : 70 Mhz C ) Maximum Input : 400 V ( Peak ) D ) Sample Rate : 2 Gsa / Sec E ) Waveform Update Rate : 400 Waveforms / Sec F ) Memory Depth : 100 Kpts Standard ( Upgradable ) G ) Time Base : 5Nsec / Div. To 50 Sec. / Div H ) Waveform Update Rate: 50, 000 Waveforms / Sec I ) Display : 8.5 Inch Colour Wvga J ) Trigger Modes : Force, Edge, And Video, Pulse Width. K ) Built In Interface : Standard Usb 2.0 High Speed Device 11 Lcr Q Meter - Measuring Inductance ( L ) , Capacitance ( C ) , Resistance ( R ) , Quality Factor ( Q ) And Dissipation Factor ( D ) . With A Basic Accuracy Of 0.25% And Five Digit Display Resolution. 12 Diode And Zener Diode Characteristics Trainer - A Complete System To Study The Diode Characteristics Forward And Reverse Characteristics Experiment Can Be Performed On This Trainer Kit Silicon, Zener And Germanium Diode Are Provided With This System. Inbuilt Ammeter And Voltmeter. Digital Display For Displaying Voltage And Current. Different Test Points With User Manual 13 Experimental Kit For Input / Output Characteristics Of Bjt- One Fixed 12V Power Supply, One Variable Constant Voltage Source And One Constant Current Source For Output Characteristic Of The Transistor. Three Digital Meters On The Panel. One Fixed Frequency Of 1Khz With Variable Amplitude , Bread Board With User Manual 14 Training Kit To Study Of Opamp Characteristics - Specification: 2 No. Variable Dc Power Supply 0-3V / 30Ma, 1 No. Fixed Dc Power Supply 12V1 No. Operational Amplifier Ic 741 & Different Types Of Resistance, Capacitors And One Potentiometer With User Manual 15 Training Kit To Study Of Universal Logic Gates & Applications With Power Supply - • On Panel Gates : 4 Nand Gates ( 7400 ) , 4 Nor Gates ( 7402 ) , 4 And Gates ( 7408 ) , 4 Or Gates ( 7432 ) & 6 Not Gates ( 7404 ) • 5 Nos Of Extra 18 Pin Ic Base Mounted On Panel To Use Different Ics • 5 Logic Input Switches With Led • 5 Logic Output Led • On Panel 5 Sockets Each For +5 V & Gnd • Required Numbers Of Patch With User Manual 16 Training Kit For Study Of Kirchhoff’S Current & Voltage Law- Equipped With Necessary Resistors, Digital Voltmeters, Ammeter And Inbuilt Variable Power Supply 5V & 12V.On Board Test Points To Observe Signals, On Board Schematic Diagram, With User Manual 17 Analog Wattmeter - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Dynamometer Type Wattmeters I ) 5-10A, 150-300-600V, Ii ) 10-20A, 150-300-600V. 18 Series Parallel Resonance Of R-L-C Ckt - Kit For Series Parallel Resonance Of R-L-C Ckt: The Set-Up Consist Of Power Supply, Audio Oscillator With Digital Readout, Digital Rms Meters And Different Number Of Inductors ( Smoothly Variable ) , Capacitors, Potentiometer, Ammeter & Voltmeters With User Manual 19 Power Factor Meter ( Single Phase ) - Clear Rectangular Window With Excellent Visibility, Knife Edge Pointer And Anti Parallax Mirror. Accuracy Class ± 0.5% Of Full Scale Deflection. Power Factor Meter- Dynamometer Type Power Factor Meter , 1 Phase , Current Coil Range : 2.5 & 5.0 Amps. ( Dual Range ) , Pressure Coil Range: 150, 300 Volts ( Double Range ) . 20 Power Supply:Dc - • 2X30v-3A, 5V-3A • Constant Voltage & Constant Current Operation • Digital Displays For Voltage & Current • Adjustable Current Limiter • Protection Against Overload & Short Circuit 21 Training Kit For Verification Of A ) Superposition Theorem. B ) Thevenin’S Theorem. C ) Norton’S Theorem. D ) Maximum Power Transfer Theorem. Two Nos. Variable Dc Power Supply. Two Nos. Resistive Potentiometer ( Pot ) . Differnt Values Sets Of Resistances. Digital Dc Voltmeter, Dc Ammeter, Complete Operating Manual, Connecting Wires , Patch Cords, Etc. 22 Ac Distributor Simulator - Transmission Line Trainer Consist Of:- 100 Km X 3 Phase Tx Line Block At The End Of Each Block Short Is Possible All Digital Multifunctional Meters At The Sending & Receiving End, Loading Provision For Total 1Kva – Load Of Variable Separate Inductive, Capacitive & Resistive Load Bank. High Quality Patch Cord And User Manual. 23 Lux Meter - Sensitivity – 1 - 50, 000 Lux Error Percentage + 5%, 4 ½ Digit To 5 ½ Digit Detail Operating Manual Also To Be Supplied 24 Dielectric Strength Test Setup For Transformer Oil - Transformer Oil: Breakdown Voltage : 0-60Kv, Vertical Panel Mounted With Voltmeter, Glass Cover Encapsulated, Test Cup And Gap Measuring Gauge With 10 Liter Of Transformer Oil 25 Digital Insulation Tester , Digital Insulation Tester: 500V, 200Mohm, Portable Type 26 Half Wave & Full Wave Bridge Rectifier Trainer Kit, 1 / 2 Wave, Fullwave ( Centre Tapped & Bridge ) With Filter Ckt With User Manual 27 Experimental Kit For Characteristics Of Zener Diode, Complete Set Should Consist Of All Accessories To Perform The Experiment Using A Zener Diode Fitted On The Printed Boardwith User Manual 28 Experimental Kit For Input / Output Characteristics Of Bjt, Transistor Trainer Kit Consists Of One Fixed 12V Power Supply, Variable Constant Voltage Source And Constant Current Source For Output Characteristic Of The Transistor.Digital Meters On The Panelwith User Manual 29 Experimental Setup For Implementation Of Adder & Subtractor, With Adder ( Half & Full ) & Subtractor ( Half & Full ) Using Basic Gates. Must Have Onboard Input Supply, Display To Show Logic Outputwith User Manual 30 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer With Power Supply, Display Unit, Patch Cords, Necessary Ic And Manuals For Each. 31 A / D & D / A Converter Trainer Kit 8 Bit With Accessories And Manual. 32 Scr Single Phase Half Wave, Full Wave, Fully Controlled Bridge Rectifier / Converter With In-Built Meters And On-Board Power Supplywith User Manual 33 Training Kit For Study Of Vi Characteristic Of Scr, Igbt , With Separate Section For Scr And Igbt Characteristics With In-Built Meters And Led Indicationswith User Manual 34 Scr Firing Circuit, Power Requirement: 230 Vac +10%, 50Hzstandard Accessories:6 Volt / 1 / 4 W Lamp, Patch Chords & Instruction Manual 35 Training Kit For Study Of Vi Characteristic Of Diac, With Proper Heat Sink And Training Manual.Consists Of One No. Diac With Proper Heat Sink.All Components Should Mount On A Screen Printed Pcb Fixed On Acabinets 36 Scr Commutation Circuit, Scr Commutation Circuit Commutation Techniques Used . I ) Class A Ii ) Class B Iii ) Class C Iv ) Class D V ) Class E Vi ) Class F • In Built Ic Based Dc Regulated Fixed Power Supply +12Vdc & Acwith User Manual 37 Electronic Energy Meter, A.C. Single Phase, 2 Wire Solid State ( Static ) Fully Electronic Energy Meter, Accuracy Class 1.0 & Current Rating 5-30 Amp. With Backlit Lcd Display For 240 Volt System Fitted With Pilfer Proof Meter Box. 38 Trainer Kit For Measurement Of Medium Resistance By Wheat Stone Bridgekit Must Have Inbuilt Power Supply, Measurement Range 1 Ohm – 100 Ohm, Having Sensitive Galvanometer With User Manual 39 Trainer Kit For Measurement Of Low Resistance By Kelvins Double Bridge, With Power Supply, Range 1 Microohm -1 Kiloohm, Having Sensitive Galvanometerwith User Manual 40 Earth Tester, Insulation Reslstance Test: More Than 25 Megohms At 500 V Dc Between Electrical Circuit & Containing Case, Display: Led Or Lcd. Dual Ranges: 0 - 10 - 1000 Ohm ( B ) 0 - 5 - 500 Ohm 41 Trainer Kit For Measurement Of Inductance By Anderson Bridgekit Must Have Built In Power Supply, Inbuilt Signal Source, Application Bridge On Screen Printed Front Panel Display, Set Of Unknown Inductance Coil, Variable Resistance, Set Of Capacitance, Audio Null Detector, Patch Cords, Connecting Wires And Head Phone, Complete Operating Manual. 42 Trainer Kit For Measurement Of Capacitance By Schering Bridge Kit Must Have Input Supply 50 Hz Sine Wave, Two Ratio Dial P & Q, Each Having 1, 10, 100, 100 Ohm Coil, 3 Decade Dial, X 0.001 Microfarad, 0.01 Microfarad, 0.1 Microfarad. Having Sensitive Head Phonewith User Manual 43 Tri-Vector Meter 3Ph 4 Wire Lt Ct & 3Ph 3 / 4 Wire Ht Ct / Pt Operated Fully Static Amr Compatible Tri-Vector Energy Meters Dlms Compliant – Category C 44 Trainer Kit For Measurement Oflinear Displacement Bylinear Variable Differential Transformer ( Lvdt ) For Linear Displacement, Type: Spring Loaded Core Type, Configuration: Axial Type Lvdt Full, Actual Displacement: By Micrometer Arrangement Pitch: 1 Mm, Circuit: Ac Excitation Source, Phase Detector & Digital Display, Excitation Source: Sine Wave Of 2 Khz To 5 Khz Variable Frequency And 0 To 5 Or 12V Variable Amplitude, Readout: Digital Display To Measure 0 To + / - 10 Mm, Indicating, Displacement In Millimeters With Core In / Out Indicated By + Sign, Test Points: Instruction Manual 45 Measure Pressure Using Pressure Sensor Kit.Resistive Pressure Transducer With Pressure Of 0-300Mm Hg / 6Psi, Primary Excitation Voltage Of 5V Dc On Board Provided. On-Board 41 / 2 Digital Panel Meter Provided Using Ad7135. Pressure Generation And Monitor Using A Pressure Gauge. Onboard Instrumentation Amplifier Provided With User Manual. 46 Trainer Kit For Op-Amp As Inverter, Non-Inverting Modefront Panel Built With High Class Insulated Printed Circuit Board Sheet With Well Printed Circuits And Symbols. Fuse For Short Circuit Protection. Patch Cords. The Trainer Is Housed In Abs Plastic / Wooden Cabinet.Size Of The Trainer Set 12”X8”. Instruction Manual. 47 Trainer Kit For Op-Amp As Adder, Differentiator And Integrator Instrument Comprises Of Two Dc Regulated Power Supply 0-5V Dc, ±15V Dc, One Meters To Measure Input And Output Voltage & Combination Of Resistance, Capacitors Mounted On Front Panelwith User Manual 48 Convert Digital Data Into Analog Data By Using Analog To Digital Converters And Analog Data Into Digital Data By Digital To Analog Converter Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden Box, Proper Patch Cord With User Mannual.Glass Epoxy Smobc Pcb, 8 No. Of Output Led, Wooden / Metal Enclosure 49 Simulate Differential Protection Scheme For Transformer With Power System Simulation Kit-3-Phase, 415V, 50Hz, Ac Supply. Control Supply : 1-Phase, 230V, 50Hz, Ac Supply. Short Circuit Protection : Hrc Fuses & Mcb. 3-Phase, 3Kva, 415 / 240V, Delta / Star Connected Transformer With Tapings Primary : 0-10-20-100% Secondary - 0-10-20-100% On Each Phase Of Windings, Natural Air Cooled. • Protection Cts : Primary Side Cts 10 / 1A, 5 Va, Cl-1, Wound Primary Typesecondary Side Cts 20 / 0.67A, 5Va, Wound Primary Type. • Fault Simulating Switches : 32A, 2-Pole, On / Off Rotary Switches Are Provided For Creating A ) Line To Ground Fault, B ) Line To Line Fault, C ) Inter-Turn Faultprotective Relays. % Differential Relay Static Type-With Minimum Basic Setting Biased Feature 10%, 20%, 30%, 40%, 50% Setting For Current. Ct Rated 1A Definite Time Over Current Relay • Earth Fault Relay • Aux. Supply To Relay : 110 / 220 V Ac / Dc Educational Bench Model With Schematic Diagram Of The Test Circuit Printed On The Model Test Points & Measurement Points Brought Out & Connected To Terminals, Circuit Setup For Testing Through Interconnections Of Patch Chords With User Manual 50 D.C. Compound Motor ( Open Type ) - 2 Hp- Dc Compound Motor: 2H.P. 1500Rpm, 230V, Open Type For Assemble And Dismantling Of Different Parts Of Stator And Rotor, Commutator, Brush Etc. 51 D. C. Shunt Generator- For O.C.C. Test-Dc Motor:- 2Hp, 1500 Rpm., 220V Dc Generator:- 1Kw, 1500 Rpm, 220V. Necessary Panel To Set Up With Foundation, Voltmeter:0-300V, Ammeter: 0-5A, Ammeter:0-1A, 4-Point Dc Starter. 52 Dc Motor Speed Control System With Power Supply & Motor-Motor 0.5 Hp, Variable Dc ( 0-230V ) Source, Built In Techogenerator, Digital Panel Meter, Power Circuits Of 4 Scrs ( 1200V., 25 A ) I.E. Half Bridge, Facilities Of Studying Torque Speed Characteristics Of Dc Motor, Torque Measurement, Rpm Indicatorwith User Manual 53 Swinburns Test To Compute Efficiency Of Shunt Generator, 1Hp, 220V, 1500Rpm-D.C. Motor:- 2 Hp, 230V, 1500Rpm, Shunt Field. Suitable Panel Withvoltmeter ( 0-300V ) , And Ammeter: 0-1A, Ammeter:0-5A With User Manual & Proper Setup With Foundation 54 Determination Of Equivalent Circuit Parameters Of A Single Phase Transformer By O.C And S.C Test- Transformer: 1 Kva, 230 / 115V, Variac: 0-270V, Panel With Voltmeter: ( 0-50V ) , Voltmeter ( 0-300V ) , Ammeter: 0 -2A, Ammeter:0-10A, Wattmeter: 0-1200W. 55 Compute The Efficiency Of A Single Phase Transformer By Back To Back Test- Complete Set Upwith User Manual: Ac Power Supply 0-230V At 4A ( Optional ) • Operated On Mains Power 230V, 50Hz +10% Digital / Analog Meters: • Voltmeter 2 Nos. ( For Primary And Secondary ) • Ammeter 2Nos. ( For Primary And Secondary ) • Digital Wattmeter 2Nos. 56 Parallel Operation Of Two Single Phase Transformers To Determine The Sharing Of Load Current, Apparent Power And Real Power- Transformer ( 2 Numbers ) : 1 Kva, 230 / 115V, Panel With Voltmeter ( 0-300V / 150V ) , Ammeter: 0-10A, Variable Resistive Load 115V, 10A, Single Phase. 57 Three Phase Transformer With Provision For The Connection In All Vector Groups ( Stardelta, Delta-Star Etc ) - 3-Phase, 1Kva, 415V / 230V, Transformer With Provision For The External Connection Terminals To Perform All Vector Groups ( Star-Delta, Delta-Star Etc. ) . 58 Isolation Transformer - Single Phase, 1Kva , 3Phase , 415V / 230V Isolation Transformer With Provision To Show Its Function And Testing Of It. 59 Tachometer For Speed Measurement-Digital Photo Tachometer • No Contact Rpm Measurement, Wide Measuring Range From 0.5 To 100, 000 Rpm. , Resolution: 0.1 Rpm ( < 1000 Rpm ) . • The Last Value Can Be Stored Into The Memory Automatically & Be Obtained By Pressing Memory Call Button With User Manual 60 4 Point Starter-For Operational Upto 7.5 Hp Dc Motor, 230Vdc. 61 Ac Variac ( Closed Type ) - Single Phase 8A, 0-270V, Rotary Type 62 Clip On Meter-Clip On ( Digital Led Display ) Type Meter Suitable For Measurement Of ( I ) Ac / Dc Current 5 / 10 / 50Amp, With Zero Set Button ( Ii ) Voltage:600Vac / 500Vdc, ( Iii ) Resistance: 0-10Mohms. 63 The Three Phase Squirrel Cage Induction Motor Setup With Various Starters- Complete Panel With Dol, Star-Delta , Auto-Transformer Starter With 2Hp , 3Phase, 415V , 4Pole, 1500Rpm, Squirrel Cage Induction Motor With Suitable Foundation & User Manual 64 Three Phase Squirrel Cage Induction Motor For Direct Load Test To Plot The Various Characteristics-2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 65 Three Phase Squirrel Cage Induction Motor For No Load And Blocked Rotor Test- 2Hp 3Ph , 415V, 4Pole , 1500Rpm Squirrel Cage Induction Motor With Necessary Panel With Meters , Starter With Suitable Loading Arrangements, Proper Foundation 66 Three Phase Squirrel Cage Induction Motor For Speed Control-Applicable Methods: I ) Auto-Transformer, Ii ) Vvvf. Specification: 2Hp , 3Hp , 415V, 4Pole, 1500 Rpm Three Phase Squirrel Cage Induction Motor With Necessary Panel Meters And Equipments. 67 Three Phase Slip Ring Induction Motor With Necessary Panel, Proper Base Foundation - To Measure The Open Circuit Voltage Ratio Of The Three Phase Slip Ring Induction Motor.Specification: 2Hp , 3Ph , 415V, 4Pole, 1500 Rpm 68 Three Phase Alternator For Oc, Sc And Load Test-3 Kva, 415 V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With Dc Motor ( Shunt ) 5Hp, 220 V, 1500Rpm, 4-Point Dc Starter, 3-Phase Variable Resistive Load 220 ( L-L ) , 15A Per Phase, With Necessary Panel, Proper Base Foundation 69 Squirrel Cage 1 Hp, 400V I / M & Stroboscope To Measure Slip- I ) 1Hp, 415V, 3-Ph, 50Hz, 1440 Rpm Squirrel Cage Induction Motor With Loading Arrangement. Ii ) Stroboscope For Frequency 0-6Khz. 70 Three Phase Synchronous Motor-Synchronous Motor:3Hp, 415V, 1500 Rpm, Excitor 220V, Dc Through Slipring, Dc Shunt Generator, 1.5Kw, Rpm, 230V Dc, Regulator Control With Necessary Panel, Proper Base Foundation 71 Synchronization Of 3 Phase Alternators By Synchroscope & 3 Lamp Method-Synchronization Of 3 Phase Alternators: 2- Numbers Of 3 Kva, 415V, 1500Rpm, 3-Ph, 50Hz, Alternator Coupled With 2-Numbers Of Dc Motors ( Shunt ) 5Hp, 230Vdc, 1500Rpm Alongwith Synchronisation Panel With Synchronoscope, 3-Lamps ( With Fuse ) For Lamp Method, Ammeters & Voltmeters For Dc Motors And Alternator, Digital Frequency Meter, Digital Rpm Meter For Dc Motors, 4-Point Dc Starters For Both Motors, 3-Phase Star Connected Variable Resistive Load, 4-Pole Mcb ( S ) & Variable Dc ( With 2-Pole Mcb ) Field Control For Both Alternators. The Whole Set-Up Needs To Be Equiped With Proper Electrical Protection, Base Foundation, Connector Cables, With User Manual, 72 Stepper Motor Controller Trainer-Stepper Motor Controller Trainer Stepper Motor : Motor Type :Unipolar, Torque : 6 Kg-Cm Phase Current : 0.8 Amp. , Stepping Angle : 1.8° / 0.9° Operating Voltage : 12 V Dc Input Pulse : 5V Ttl Compatible, Test Points :20 Gold Plated With User Manual 73 D.C. Servometer Speed Control -Trainer Kit-Kit For D.C. Servometer Speed Control- Position Control Of A 12V, 1A D.C.Gear Motor ( 50 Rpm ) Provision For Positive And Negative Tacho Generator Feedback Tacho Constant: 2V / 1000 Rpm Approximately Calibrated Dials For Reference And Output Position: Resolution 1° Servo-Potentiometers With Full 360°Rotation Microprocessor Based Waveform Capture / Display Card Built-In 3½Digit Dvm For Signal Measurements Built-In Step Signal And Ic Regulated Power Supplies For Electronic Circuits Separate Unit For Motor In A See-Through Cabinet 220V±10%, 50Hz Mains Operation With User Manual 74 Oil Hydraulic Circuit Trainer Unit: Hydraulic Circuit Trainer Unit Consisting Of Standard Components And Accessories For Carrying Out The Study Of Various Hydraulic Components And Hydraulic Circuits Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals 75 Pneumatic Trainer Kit With Compressor: Unit Is To Be Provided With Standard Mounting Board ( Modular Type ) With All Trainer Kits. All The Products Are To Be Provided With Suitable “One Touch Fittings / Push-In Fittings”.Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make , Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentionedalong With Delivery And Maintenance Kit & Manuals. 2 Hard Copies Of Operation Manual To Be Supplied; Installation, Demonstration And Training Of Faculties Are To Be Given. 76 Air Conditioning Trainer : Standard Specifications To Demonstrate The Basic Functioning Of Air-Conditioning. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manual. 77 Refrigeration Trainer: Standard Specifications To Demonstrate The Basic Functioning Of Vapour-Compression Cycle. Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned Along With Delivery And Maintenance Kit & Manuals. 78 Plug Gauge: Plug Gauge, Dimension: 25.4-0.5 Mm, Make: Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing Company. Brochure / Catalogue Showing Make, Model / Model No. And Also Online Link Of Brochure / Catalogue Should Be Mentioned. 79 Refrigerator 190 Lit, Direct-Cool Single Door Refrigerator 80 Analog Rough Balance 0-2 Kg, Pan Shape Rectangle Weight Display Analog 81 Analog Rough Balance 0-5 Kg, Pan Shape Rectangle Weight Display Analog 82 Borosil Burette Fitted With Boroflow, 100Ml 83 Borosil Burette Fitted With Boroflow, 50Ml 84 Borosil Burette Fitted With Boroflow, 25 Ml 85 Borosil 3.3 Glass Beaker With Graduation Marks, 1000Ml 86 Borosil 3.3 Glass Beaker With Graduation Marks, 500Ml 87 Borosil 3.3 Glass Beaker With Graduation Marks, 250 Ml 88 Spylx Burette Stand With Clampboss Head And Rod, Burette Stand With Clampboss Head And Rod 89 Transparent Borosilicate Glass Volumetric Flask, 250 Ml 90 Transparent Borosilicate Glassvolumetric Flask, 500 Ml 91 Borosilglass Rod , Outer Diameter: 7Mm, Length: 205 Mm, Material: Polished 3.3 Borosilicate Glass 92 Test Tube Holder, Material: Wrought Iron, Length: 200 Mm, Maximum Opening: 20 To 25 Mm 93 Spherometer: Minimum Length Of Leg 25 Millimeter, Minimum Diameter Of Leg 4 Millimeter, Pitch Of The Screw 1 Millimeter, High Grade Tool Steel 94 Instrument To Observe The Effects Of Frictions Using Inclined Plane: Consisting Of A Wooden Plane 90X18cm Having Adjustment For Setting The Required Angle Precisely Complete With Frictionless Pulley Linear And Circular Scale Pan A Wheeled Trolley And A Set Of Eight Slide Draws Having Bottom Of Different Materials.Base Board Very Superior Quality Having Thick Teak Wood Base, Fittedwith Glass Plate, Complete With Brass Arc, Leveling Screws Pan , Pulley And Iron N.P Roller Export Quality. Heavy Pattern. 95 Stainless Steel Led Digital Vernier Calliper: Mitutoyo, Made In Japan, Length 6, Vernier Constant 0.01Cm , Made Of Stainless Steel, Measure Internal, External And Height Dimensions , Digital Display 96 Verification Of Kirchoffs Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance -1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 20V, Number Of Led Indicators Available To Indicate Power Input -1, Availability Of Dc Voltmeter Available On Board -Yes, Range Of Dcvoltmeter - 0-30Volt, Availability Of Dc Ammeter On Board- Yes, Range Of Dc Ammeter - 0-50 Ma, Number Of Test Points Provided Onboard To Observe Signals - 14, Necessary Patch Cords Available For Interconnection - Yes, Casing Material - Plastic. Two Round Analog Meters For Voltage & Current Measurement, Components Are Mounted Behind The Panel With Printed Circuit Diagram, Connections Are Brought With 4 Mm Banana Sockets, Instrument Fitted In Highly Shockproof Plastics Box, 4 Mm Patch Cords Are Provided With The Trainer For Interconnections, Student Instruction Manual Will Be Provided With The Trainer Kit, 97 Instrument To Verify Inverse Square Law Of Radiation Using Photoelectric Effect: Type Of Display For On-Board Measurement- Digital, Availability Of Dc Voltmeter On Board - Yes, Range Of Dc Voltmeter - 0-20Volt, Availability Of Dc Ammeter On Board - Yes, Range Of Dc Ammeter - 0-100 Ma, Number Of Dc Regulated Power Supply With Short Circuit And Overload Protection-2, Voltage Range Of Continously Variable Dc Power Supply -20 Volt, Number Of Potentiometers Provided Onboard - 1, Number Of Test Points Provided In The Circuit To Observe Voltage And Current Signal - 5, On Board Schematic Diagram - Yes, Casing Material-Plastic, Number Of Led Indicators Available To Indicate Power Input - 1, Provision Of On-Board Knob For Adjusting The Voltage - Yes.Wooden Optical Bench, Photocell Housed With Red And Black Sockets, Lamp House With Lamps, Dc Microammeter. On Board Analog Moving Coil Meters , Galvanometer : 30-0-30, Selenium Photocell Mounted In The Metal Box With Metal Base, Lamp Holder With 60-Watt Bulb With Metal Base, Weight : 1.0Kg Approx.Standard Accessories : Selenium Photocell Mounted In The Metal Box, Wooden Plank With Half-Meter Scale Fitted On It, Lamp Holder With Lamp, Patch Chords, Instruction Manual, 98 Conversion Of Galvanometer Into Ammeter Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 99 Conversion Of Galvanometer Into Voltmeter Kit:Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance - 1, Number Of Variable Dc Power Supply Available On Board - 1, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board - Yes, Availability Of Dc Ammeter On Board-Yes, Necessary Patch Cords Available For Interconnection-Yes, Casing Material - Plastic.Instrument Comprises Of Dc Regulated Power Supply Of 0-5V. Three Round Moving Coil Meters ( One Voltmeter, One Milliammeter & One Galvanometer ) . Three Shunts, Three Resistances Are Mounted On Front Panel. 100 Ohms Law Kit: Type Of On-Board Meter Available -Analog, Number Of Potentiometers Provided Onboard To Vary Load Resistance- 1, Number Of Variable Dc Power Supply Available On Board- 1, Variable Dc Power Supply- 5 Volt, Number Of Led Indicators Available To Indicate Power Input - 1, Availability Of Dc Voltmeter Available On Board -Yes, Availability Of Dc Ammeter On Board - Yes, Casing Material - Plastic.Ohms Law App: To Verify The Ohms Law: Fitted With Slidingrheostat.Onedcvoltmeter, Mo.65&Onedcammetermo-65, Mounted On The Same Base With Terminals, 4 Mm Patch Cords Are Provided With The Trainer Kit For Interconnections 101 Pn Junction Diode Characteristics Kit: Compleate Set With Inbuilt Power Supply & With Digital Voltmeter & Ammeter Compatible For Both Forward & Reverse Bias 102 Boyles Law Apparatus: Burrete Graduated In Cc ( Or Ml ) With 1.0 Cc / Div. Scale Graduated On Both Sides ( Left & Right ) With Same Marking. Both Open And Closed Tubes Can Be Slided Up And Down Over Aluminium Rod. High Quality Synthetic Tube ( 1.0 M Long ) . One Spare Synthetic Tube. ( Withextra 500Gm Mercury ) . Superiorquality, Open&Closedtypeonemeterlongteakwoodboard Onheavy Metal Base Fitted With Leveling Screws Without Mercury But Complete With Pressure Rubber Tubing & Glass Tubes, Routinequality, Doublerodwithopen& Closedendtubes&Pressuretubing. 103 Instrument To Determine The Moment Of Inertia Of A Flywheel About Its Own Axis Of Rotation: Good Quality Stainless Steel Full Setup.Csi Superiorquality Flywheel With Weights , Comprising Of Carefully Machined And Balanced Cast Iron Wheel And Steel Spindle Is Supported On Ball Bearings In Strong Iron Brackets, Thickness: 4.4 Cm, Diameter :20 Cm, Wall Type With Pointer, With Revolution Counter, Set Ofslotted Weights For Flywheel Complete With Weights Cord And Hook. 104 Instrument For Determination Of Spring Constant Of Horizontal & Vertical Spiral Spring Setup: Stand With Heavy Base, Transparent Scale With Mm Resolution, Horizontal Support For Spring, Brightly Colored Stretch Indicator, Three Springs With Identical Diameter And Length, But Different Spring Constants, Three Of Each Spring Included, For A Total Of Nine Springs: Spring Constants Are 5 N / M, 8 N / M, 70 N / M.Consisting Of 45Cm Long Mirrorscale, Spring, Slotted Weights With Hanger And Pointer, Complete On Heavy Tripod Stand, On Metal Stand With Mirror Scale, Superior On Heavy Base, About 50 Cm High For Taking More Readings, Complete With Weights, Helical Spring: Light Spiral Spring With Pointer, Easy To Work With 50 Gm.Weight Complete With Hook For Hanging 105 Stainless Steel Led Digital Outside Micrometer: Mitutoyo: Made In Japan, 0.25Mm-0.01Mm, Least Count 0.01Mm, Made Of Stainless Steel, Digital Display. 106 Linear Expansion Coefficient Apparatus:- Superiorquality , Height 50 Cm, With Brass Rod, Stainlesssteel Finish A 50 Cm Long Expansion Base With A Built-In Dial Gauge And Thermistor.Three Metal Tubes — Brass, Copper ( 99.5%Cu, 0.5% Te ) , And Aluminum ( 98.9% Al, 0.7% Mg, 0.4% Si ) : 6.4 Mm Outside Diameter. A Foam Insulator To Avoid Heat Loss At The Thermistor Connection Point.Thermoplastic Elastometer Tubing With 6.4 Mm I.D.A Source Of Steam Or Hot Water, Such As The Pasco Model Td-8556A Steam Generator.A Digital Ohmmeter Such As Pasco Model Se9589 To Measure The Thermistor Resistance. Leads Should Have Banana Plug Connectors, Such As Pasco Model Se-9750 Or Se-9751 Patch Cords 107 Gclamp-4 Inchirwin 4 Inch / 100 Mm Record H / D G-Clamp T1204 108 Post Office Box-Post Office Box Of Material-Brass And Coil Manganin, Any Nationally Or Internationally Reputed Brand With Iso Certified Manufacturing 109 Muffle Furnace-Voltage ~230 V Ac, Insulating Maximum Temperatures 1000 C / 1200 C & Working Temperature 930 C / 1130 C Controlled By Digital Temperature Controller Cum Indicator 110 Digital Conductivity Meter-Electrode : Cell K = 1 – Pvc Sleeved Power Required: 230 V Ac 10%, 50 Hz, 5 Va Or 9 V Battery Standard Conductance: Conductance Of 1.000 M Stirrer Speed: 200 Rpm 111 Redwood Viscometer No.1-Material Stainless Steel Voltage 220 Volt Power Source Electric Frequency 50 Hz Phase Single Phase Accuracy + / - 3 °C Readability + / - 0. 5 Degree Capacity 50 Ml 112 Flash Point Apparatus With Stirrer-Voltage-115 V / 230 V, 50 Hz / 60 Hz Measuring Range- Up To 110 °C 113 Daniel Cell-Copper Vessel Complete With Porous Pot & Zinc Rod Diameter ~ 3.5- 4 Inch 114 Digital Voltmeter-Voltage -50-500 V Ac Accuracy ±10% 115 Arsenic Detection Kit-Reaction Time: 10 Minutes Test Type: Test Strip Colour Comparison Results Duration: Rapid 116 Digital Ph Meter-Resolution: 0.01 Ph Range: 0.0 To 14.0 Ph Temperature Controller Display 3 Digit 117 Cube Mould ( 70.6 Mm ) These Are Used For Casting Cement Mortar Test Specimens For Carrying Out Compressive Strength Test Of Cement As Per Is:516. These Moulds Are Manufactured As Per Is Specifications. The Faces Are Machined Flat Within ±0.02 Mm Tolerance And The Inside Dimensions Are Accurate Within ±0.2Mm. Each Mould Is Supplied With A Base Plate. Mould, Steel, For 70.6Mm Cube As Per Is: 10080-1982 Weight: Must Be 6.5 Kg Or More. Should Be Isi Mark. These Cube Moulds Are Made Of Steel. The Tolerance Between Faces Is Maintained At ±0.1 Mm And Plainness Is +0.03Mm. Cube Moulds Carry Isi Mark 118 Digital Rebound Hammer With Calibraton Anvil ( For Concrete Compressive Strength Analysis In The Field And Material Hardness Testing. ) Should Come With Rechargeable Batteries Including Charger. Capabality Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis. Should Conform To Astm C-805, En 12 504-2, Bs -1881- 202 And Other International Standards. Range:10 To 70N / Mm2 Impact Energy: 2.207 N-M Additionally The Following Minimum Specifications Must Be Met. Should Features 16 Character Digital Read Out And Provide Automatic Calculation Of Mean Rebound Number, Compressive Strength And The Median. Should Come With Rechargeable Batteries Including Charger. Capability Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis Is Required. The Necessary Software And The Required Cables For Connecting To The Computer Should Be Provided. A Calibration Anvil Should Be Provided 119 Ductility Testing Apparatus: Ductility Testing Machine Is: 1208 -1978 For Determining The Ductility Of Asphaltic Bitumen, Native Asphalt, Cut Back Bitumen And Blown Type Bitumen. It Consists Of Three Mould Assemblies On A Base Plate. A Separate Briquette Mould ( Total Length 75 ± 0.5 Mm, Distance Between Clips 30 ± 0.3 Mm, Width At Mount Of Slip 20 ± 0.2 Mm, Width At Minimum Cross Section 10 ± 0.1 Mm, Thickness Throughout 10 ± 0.1 Mm ) For Casting The Specimens Is Also Supplied. A Water Bath Of 10 Litres Capacity With A Perforated Shelf Not Less Than 50 Mm From The Bottom Of Bath And A Thermostat Controller For Heater. The Machine Has Two Standard Rates Of Travel Of 1 Cm / Mnt And 5 Cm / Mnt. The Movable Bracket Can Be Arrested Or Released Without Switching Off The Motor By A Clutch Arrangement. Suitable For Operation On 220V, 50 Hz, Single Phase Ac Supply. 120 Length Gauge Conforms To Is:2386 ( Part-I ) Used For Determination Of Elongation Index Of Aggregate. Length Gauge With Isi Certification Mark Is:2386 ( Part I ) , It Consists Of A Metal Plate On Which 8 Steel Pins Are Vertically Mounted With Specified Distances In Between. This Assembly Is Mounted On A Hardwood Base 121 Colorimeter ( Digital ) : Colorimeter, Equipped With Easy-To-Use Conventional Style Controls, Making It Ideal For Routine And Educational Use. Standard 10Mm Square Cuvettes, Semi-Micro Volume Cuvettes, Flowthrough Or Pour In / Suck Out Cells Can All Be Used With The Standard Sample Holder. Wavelength Range: 400 To 710Nm Wavelength Selection :: 8 In-Built Gelatin Filters: 430, 470, 490, 520, 540, 580, 600 And 710Nm Measurement Ranges:: 0-100%T, 0-1.50Abs, 0.1 To 1000 Concentration Bandwidth:Typically 40Nm Blank Drift:: 2% / Hr After 15 Minute Warm-Up Photometric Linearity :: 1%T Light Source :: Tungsten Filament Lamp Output:: Analogue, 10Mv Per Digit Power: 230V, 50Hz Size ( L X W X D ) :: 300 X 355 X 120Mm Weight:: 3Kg 122 Cod Test Apparatus: Cod Test Sample For Dry Bath Heating. Temperature 5+ 150 ◦C + / _ 1◦ C. Digital Controller With Heating Block. Sample Being Digested Within 2 Hours With Titration Method Bod Bottle Capacity : 300 Ml B.O.D. Incubators Has Been Designed Especially For Biological Oxygen Demand Determination & Other Applications Like General Incubators, Serum Studies & Enzyme Assays Test. We Can Also Customize The B.O.D. Incubators To Suit The Varied Requirement Of The Clients With In Stipulated Time Frame. Inner Chamber Made Of S.S.304 & Outer Chamber Made Of M. S. Powder Coated Full Length Inner Acrylic Door Permit Inspection Of Specimens Without Disturbing The Tem. Temp Controlled By Solid State Digital Controllers Housing All The Control With Pt-100 Sensor Illumination Light Are Provided For Viewing With Door Limit Switch. Cfc Free Hermetically Sealed Compressor Provide Temp. For Below Ambient Condition. Air Circulation Fan For Maintain Temp. Uniformity Throughout The Chamber. The Chamber Is Provided With Modular Removable Shelves Made Of S. S. For Complete Flexibility In Use. To Work On 230 Volts 50 H2. 123 Validation Protocols : Iq Oq & Pq Documentation With Calibration & Tradability Certificate Of Controller. Safety Features : Built In Temp Deviation Audio Visual Alarm, Safety Thermostat For Overshoot Temp. Cut Off System. Hrc Fuses For Compressor Heater & Mains Time Daily Circuit For Safety Of Compressor. This B.O.D. Incubator Is Available In Below Sizes: Size= 6Cu.Ft Inner Dimension W X D X H = ( 50 X 50 X 70 ) Cm Capacity= 175 Ltr No. Of Shelves= 2 124 Colony Counter: Working Temperature 5 To 50 ◦ C, 4 Digit Red Led Display, Petridish Holder, Fluorescent Lamp, Zero Reset Button, Dimension-30 ( W ) X33 ( D ) X10 ( H ) Cm, Net Weight 6.5 Kg. 125 Digital Nephelometer ( Turbidity Meter ) :Conformance:: Iso 7027 ( Ir Source ) Epa 180.1 ( Tungsten Lamp ) Measurement Range:: Auto-Ranging From 0 - 1000 Ntu Principle:: Nephelometric Non Ratio Accuracy:: + / - 2% Of Reading Plus 0.01 Ntu Resolution:: 0.01 Ntu ( 0 - 9.9 Ntu ) , 0.1 Ntu ( 10- 99 Ntu ) , 1 Ntu ( 100 - 1000Ntu ) . Response Time: < 6 Sec Display:Lcd , 3 Digit Light Source: Tungsten Filament Or Ir - Led ( 860Nm ) Power Supply: 120 - 240 Volts Ac Sample Cells: 30 M Shipping Dimensions :: 27.3X25.4X9.5Cm ( 10.7 X 10 X 3.75 ) Shipping Weight:: 1.92 Kg ( 2.9Lbs ) 126 High Volume Air Sampler: High Volume Sampler ( With Gaseous Attachment ) Technical Specifications :Flow Rate: - 0 To 1.8 M3 / Min Free Flowparticle Size: - Particles 0 To100 Microns & Below Collected On Filter Paper Holder. Spm Bigger Than 100 Microns Collected In A Separate Sampling Bottle Under The Cyclone. Sampling Time: - 24 Hours... 127 Low Volume Air Sampler: State Of The Art Microprocessor Electronics Flowrate And Volume Totalizations Displayed Are Temperature And Pressure ( 4 Options Available ) Classical Stp 0ºc, 760 Mmhg Normal T And P 20ºc, 760 Mmhg Modified Normal T And P 21.1ºc, 760 Mmhg Standard Ambient T And P 25ºc, 760 Mmhg Elapsed Time Meter Auto Zero Calibration Feature Of Flow Sensor Bright Led Display Flow Rate Accuracy Within ± 4% F.S. Rs-232 Communication Port W / Operator Selectable Download Frequency For Real-Time Data Auto Shut-Off On Time Or Volume 110 – 120 Vac, 50 / 60Hz; Single Phase 128 Hydraulic Bench: Top Tray: Size 1000 X 700 X 100 Mm ( Approx ) Water Circulation: 1 Hp Pump. Flow Measurement: Using Measuring Tank, Capacity 40L. Sump Tank: Capacity 100 Ltrs. Control Panel Comprises Of: Standard Make On / Off Switch, Mains Indicator, Etc The Whole Set-Up Is Well Designed And Arranged In A Good Quality Painted Structure 129 Crushing Value Test Apparatus: Consists Of M.S.Cylindrical Container 150 Mm ±0.5Mm Dia X 130Mm To 140Mm High With Base Plate 200 To 230 Mm. / Sqr X 6Mm Thick. A Plinger Of 148Mm ± 0.5Mm Dia X 100 To 115Mm High. Supplied Complete With Tamping Rod, 16Mm Dia X 600Mm Long, One End Rounded. And 1 No. Metal Measure 115 ± 0.5Mm Dia X 180 0.5Mm High. Consists Of Both End Open Cylinder, Base Plate, A Plunger 130 Digital Ph Meter: Measuring Range Resolution Accuracy Ph Range 0 To 14 Ph ( Min. ) 0.001 Ph ± 0.002 Ph Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Rel. Mv -1000.0 - 1000.0 ( Min. ) 0.1 Ph ± 0.2 Temperature Mtc -10.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Atc -5.0 - 100.0 °C ( Min. ) 0.1 °C ± 0.1 °C Temperature Compensation :Automatic And Manual Temperature Compensation Display : It Should Have Thin Film Transistor ( Tft ) Display Of More Than 4 Inch Color ( Blue / Red / Green / Yellow ) Display For Better Vision Of Readings With Clear And Well Arranged Icons Of Parameters Like Ph, Temperature, Mv, Date & Time Etc. Ingress Protection Level : It Should Be Ip54 Complied Protection Level. Power Requirements : It Should Be Operable With 9 -12V / 10W Dc Adapter.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
West Bengal View Result →
34.
Agriculture #10341155 Price Bid
Supply, Installation, Testing And Commissioning Of Milk Processing Unit Supply, Installation, Testing And Commissioning Of Milk Processing Unit , Supply , Installation And Commissioning Of Milk Processing Unit , Unit Assembly For Receiving Milk With 1000 Lit Bulk Cooler, Holding Tank Etc 1000 Lit Bulk Cooler, Holding Tank , Milk Pasteurization Unit 1000 Ltr , Cold Room (2 Units Of 10 Tonne Capacity) 2 To 4 Degree Celsius, 10X10x8 , Cheese Press Machine (Pneumatic Double Head) Pneumatic Double Head , Cheese Preparation Machines (Cheese Mould 10Kg X 10 No, Cheesevacuumedpacking Machine) 10Kg(300X300x150) Single Head , Cheese Packing And Other Machinery (Pouch Packing Machine, Steam Boiler 300 Kg Etc) 200, 500, 1000Ml 2 Hp Pump , Khava Machine, Cheese Melting Vat Etc. 120 Ltr, 500 Ltr , Etp Unit (Effluent Treatment Plant) Diffused Aeration System, Blowers, Pumps, Sand Filter, Hypochlorite Dosing System, Inter Connecting Piping. , Equipment And Machinery Of Chemical And Microbiology Laboratory (Oven, Incubator, Centrifuge Machine, Steriliser, Bacteriology Workcabin, Glassware, Etc) Oven, Incubator, Centrifuge Machine, Steriliser, Bacteriology Workcabin, Glassware
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
35.
Public Administrative Department #10291583 Price Bid
Supply Of Machinery, Pvc Pipe And Sprinklers For Various Parks At Kotla Mubarakpur Ward No. 147, Central Zone , Hedge Trimmer Engine: 2- Stroke - Single Cylinder Air Cooled. Engine Displacement: Should Be Between 20-25 Cc Power Output: Should Be Minimunm 1 Hp Fuel Tank Capacity: Minimum 400 Ml Weight: Should Not Be More Than 6.0Kg Clutch: Clutch Linning Should Be Metal Only. Handle: Must Have Rotating Multi-Function Handle Anti Vibration System: Must Have Spring Loaded Technology For Anti Vibration System Design: Should Have Double Sided Blade With Tooth Spacing Minimum 35Mm Bar Length: Minimum 600 Mm Blade: Should Have Chrome Plated -Anti Corrsion. Stroke Rate ( L/Min): Minimum 3000 Vibration Level M/S2 At Right Handle: Should Not Be More Than 3.5 M/S2. Sound Pressure Level (Db..(A)): Should Not Be More Than 95 Certification: Should Have Tuv With En Iso 10517:2009 , Brush Cutter Engine: Single Cylinder, 2 Stroke, Aircooled Only Engine Displacement: 40.2Cc Power Output: 2Kw/2.7Hp Max Output Shaft Speed At Cutting Attachment: Should Be Minimum 9000 Rpm Carburetor: Diaphragm With Compensator Technology. Fuel Tank Capacity: Minimum 600 Ml. Weight( Dry,Without Cutting Attachment & Deflector): Should Not Be More Than 7.5 Kg Clutch: Centrifugal Type, Clutch Shoe Support Base & Liningmetal Only. Multi Function Handle: Should Have Acceleration ,On/Off Switch At Right Handle. Brushcutter Harness: Should Be Double Shoulder Harness Only. Anti Vibration System: Must Have 4- Point Aniti Vibration System. Vibration Level In M/S2 At Right Handle : Should Not Be More Than 2.5 M/S2 Sound Pressure Level Db(A): Should Not Be More Than 105 Db(A) Drive Shaft Design: Must Have Drive Shaft Ends Square Design Type Only. Certification : Must Have Valid En Certificaton , Operated Chain Saw Engine : Single Cylinder, 2 Stroke, Aircooled Only Displacement: 45.4Cc Power Output : 2.3Kw. 3.0 Hp Max.Engine Speed (With Guide Bar & Chain ): At Least 12500 Rpm Carburetor: Diaphragm Type & Compensator Technology. Fuel Tank Capacity: Should Be Minimum 450 Ml. Dry Weight( Without Cutting Attachment ): Should Not Be More Than 5.0 Kg Clutch: Clutch Shoe Linining Metal Only. Guide Bar Design: Should Be Rollomatic Type. Guide Bar Length: Guide Bar Length Must Have 50 Cm/20 Inch. Guide Bar And Chain: Should Have Same Manufacture Only. Chain Type: Every Drive Link Require Groove & Small Oil Receiver Hole For Better Lubrication. 0.325 Inch Pitch & 1.6 Mm Thickness Only. Chain Lubrication System: Fully Automatic ,Speed Controlled Rotary Oil Pump Chain Oil Tank Capacity: Should Be Minimum 200 Ml. Oil Pump Drive: Should Have Direct Drive From Crankshaft & Oil Pump Flow Adjustable. Master Lever Control: Must Have All Operation In One Hand, Chock,Throttle, Acceleration,Switch Off. Guaranteed Sound Power Level: Should Not Be More Than115 Db(A) Maximum Chain Velocity To Iso 11681: Should Be Minimum 28 M/S Certification: Productshouldhave Valid Dplf Certificate With Test Standard En Iso 11681. , Petrol Operated Pole Pruner Engine : Single Cylinder, 2 Stroke, Air Cooled Only Displacement: Should Be Between 25-30 Cc Power Output : Should Be Minimum 1.2 Hp Weight (Dry Without Cutting Attachment & Fuel ): Should Not Be More Than 7.5 Kg Fuel Tank Capacity (Ml): Should Be Minimum 400Ml Chain Oil Capcity (Ml): Must Have Minimum 200 Ml. Clutch : Clutch Shoe Linining Should Be Metal Only. Guide Bar Length : Minimum 30Cm Guide Bar And Chain : Should Have Same Manufacture Only. Chain Type : Every Drive Link Need Groove & Small Oil Holes For Better Lubrication. Saw Chain Pitch Should Be 1/4 Or 3/8Picco Only And Drive Link Thickness Must Have 1.1 Mm Or 1,3 Mm. Max.Output Shaft Speed (Rpm): Should Be Minimum 8000 Rpm At Chain Sprocket. Equipment Total Length With Guide Bar And Chain ( Cm ) : Should Be Mimimum 220 Cm - Compressed & Total Length Of Equipment - Minimum 350 Cm - Extended. Sound Pressure Level (Db/A): Should Not Be More Than 95 Db(A) Vibration Measurement M/S2 At Control Handle - Extended Poistion : Should Not Be More Than 5.5 M/S2 Certification :Must Have Tuv Certification With Test Standard En Iso 11680. , Pole Pruner Supply Of Telescopic Pole Pruner:- Specification:- Pole Length Incuding Blade: 6.5M Blade Material: Hardened & Tempered High Carbon Steel .The Head Of The Blade Shall Have A Hooked Tip Useful For Cutting Twigs Saw Blade Shape: Hooked Type Curved Saw Blade Type & No Of Cutting Teeth :Tripple Grounded 86 Teethblade Length : 15-16 Pole Type: Light Weight Telescopic Tubular Aluminium Alloyextendable Poleno Of Positions For Pole Heightadjustment : 10 Positionslocking Mechanism : Ergonomicvally Designed Two Way Locking Mechanism Total Working Length : Max 219(6623 Mm), Min 103 (3103Mm) Branch Cutting Capacity: 200Mm Max , Lawn Mower Supply Of Lawn Mower:- Specification:- Type Of Machine Walk Behind Lawn Mowers Power Source Petrol Engine Start Type Recoil / Pull Start Speed Control Variable Speed Drive Type All Wheel Drive Blade Style Rotary Type Blade Engagement Electromagnetic Cut Width (Mm) 500 To 524 Minimum Cut Height 1 Millimeter Maximum Cut Height 26 Millimeter Blades Metallic Number Of Blades 1 Number Of Positions For Cut - Height Adjustment 2 Number Of Levers For Cut - Height Adjustment Single Lever Number Of Wheels 4 Front Wheel Size 200 Millimeter Rear Wheel Size 200 Millimeter Wheel Tyres Pneumatic If Yes, Grass Catcher / Collector / Bag Volume 88 Liter Engine Power Rating (Watt) 4000 To 4999 Engine Fuel Tank Capacity - 1 Ltr. , Pvc Pipe Supply Pvc Pipe Made Of Nylon With Braiding, Inner Diameter 30 Mm, Length Of Coil 30 Mtr. & Wall Thickness 3 Mm Up Of 1St Grade Pvc (As Per Sample) , Rain Gun Staineds Rain Gun Staineds: Anastain Jaguar Water Gun-Alluminium Alloy Body And Arm, Gun Matel Hex Nutt And Inlet Jeckt And Plactic Nozal. , Tryport Stand Tryport Stand: 1-1/2” Rain Gun Stained: 1-1/2” With Gi Riser 1-1/2” X 4 Fit.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Delhi View Result →
36.
Public Administrative Department #10291578 Price Bid
Supply Of Machinery, Pvc Pipe And Sprinklers For Various Parks At Andrews Ganj Ward No. 145, Central Zone , Hedge Trimmer Engine: 2- Stroke - Single Cylinder Air Cooled. Engine Displacement: Should Be Between 20-25 Cc Power Output: Should Be Minimunm 1 Hp Fuel Tank Capacity: Minimum 400 Ml Weight: Should Not Be More Than 6.0Kg Clutch: Clutch Linning Should Be Metal Only. Handle: Must Have Rotating Multi-Function Handle Anti Vibration System: Must Have Spring Loaded Technology For Anti Vibration System Design: Should Have Double Sided Blade With Tooth Spacing Minimum 35Mm Bar Length: Minimum 600 Mm Blade: Should Have Chrome Plated -Anti Corrsion. Stroke Rate ( L/Min): Minimum 3000 Vibration Level M/S2 At Right Handle: Should Not Be More Than 3.5 M/S2. Sound Pressure Level (Db..(A)): Should Not Be More Than 95 Certification: Should Have Tuv With En Iso 10517:2009 , Brush Cutter Engine: Single Cylinder, 2 Stroke, Aircooled Only Engine Displacement: 40.2Cc Power Output: 2Kw/2.7Hp Max Output Shaft Speed At Cutting Attachment: Should Be Minimum 9000 Rpm Carburetor: Diaphragm With Compensator Technology. Fuel Tank Capacity: Minimum 600 Ml. Weight( Dry,Without Cutting Attachment & Deflector): Should Not Be More Than 7.5 Kg Clutch: Centrifugal Type, Clutch Shoe Support Base & Liningmetal Only. Multi Function Handle: Should Have Acceleration ,On/Off Switch At Right Handle. Brushcutter Harness: Should Be Double Shoulder Harness Only. Anti Vibration System: Must Have 4- Point Aniti Vibration System. Vibration Level In M/S2 At Right Handle : Should Not Be More Than 2.5 M/S2 Sound Pressure Level Db(A): Should Not Be More Than 105 Db(A) Drive Shaft Design: Must Have Drive Shaft Ends Square Design Type Only. Certification : Must Have Valid En Certificaton , Operated Chain Saw Engine : Single Cylinder, 2 Stroke, Aircooled Only Displacement: 45.4Cc Power Output : 2.3Kw. 3.0 Hp Max.Engine Speed (With Guide Bar & Chain ): At Least 12500 Rpm Carburetor: Diaphragm Type & Compensator Technology. Fuel Tank Capacity: Should Be Minimum 450 Ml. Dry Weight( Without Cutting Attachment ): Should Not Be More Than 5.0 Kg Clutch: Clutch Shoe Linining Metal Only. Guide Bar Design: Should Be Rollomatic Type. Guide Bar Length: Guide Bar Length Must Have 50 Cm/20 Inch. Guide Bar And Chain: Should Have Same Manufacture Only. Chain Type: Every Drive Link Require Groove & Small Oil Receiver Hole For Better Lubrication. 0.325 Inch Pitch & 1.6 Mm Thickness Only. Chain Lubrication System: Fully Automatic ,Speed Controlled Rotary Oil Pump Chain Oil Tank Capacity: Should Be Minimum 200 Ml. Oil Pump Drive: Should Have Direct Drive From Crankshaft & Oil Pump Flow Adjustable. Master Lever Control: Must Have All Operation In One Hand, Chock,Throttle, Acceleration,Switch Off. Guaranteed Sound Power Level: Should Not Be More Than115 Db(A) Maximum Chain Velocity To Iso 11681: Should Be Minimum 28 M/S Certification: Productshouldhave Valid Dplf Certificate With Test Standard En Iso 11681. , Petrol Operated Pole Pruner Engine : Single Cylinder, 2 Stroke, Air Cooled Only Displacement: Should Be Between 25-30 Cc Power Output : Should Be Minimum 1.2 Hp Weight (Dry Without Cutting Attachment & Fuel ): Should Not Be More Than 7.5 Kg Fuel Tank Capacity (Ml): Should Be Minimum 400Ml Chain Oil Capcity (Ml): Must Have Minimum 200 Ml. Clutch : Clutch Shoe Linining Should Be Metal Only. Guide Bar Length : Minimum 30Cm Guide Bar And Chain : Should Have Same Manufacture Only. Chain Type : Every Drive Link Need Groove & Small Oil Holes For Better Lubrication. Saw Chain Pitch Should Be 1/4 Or 3/8Picco Only And Drive Link Thickness Must Have 1.1 Mm Or 1,3 Mm. Max.Output Shaft Speed (Rpm): Should Be Minimum 8000 Rpm At Chain Sprocket. Equipment Total Length With Guide Bar And Chain ( Cm ) : Should Be Mimimum 220 Cm - Compressed & Total Length Of Equipment - Minimum 350 Cm - Extended. Sound Pressure Level (Db/A): Should Not Be More Than 95 Db(A) Vibration Measurement M/S2 At Control Handle - Extended Poistion : Should Not Be More Than 5.5 M/S2 Certification :Must Have Tuv Certification With Test Standard En Iso 11680. , Pole Pruner Supply Of Telescopic Pole Pruner:- Specification:- Pole Length Incuding Blade: 6.5M Blade Material: Hardened & Tempered High Carbon Steel .The Head Of The Blade Shall Have A Hooked Tip Useful For Cutting Twigs Saw Blade Shape: Hooked Type Curved Saw Blade Type & No Of Cutting Teeth :Tripple Grounded 86 Teethblade Length : 15-16 Pole Type: Light Weight Telescopic Tubular Aluminium Alloyextendable Poleno Of Positions For Pole Heightadjustment : 10 Positionslocking Mechanism : Ergonomicvally Designed Two Way Locking Mechanism Total Working Length : Max 219(6623 Mm), Min 103 (3103Mm) Branch Cutting Capacity: 200Mm Max , Lawn Mower Supply Of Lawn Mower:- Specification:- Type Of Machine Walk Behind Lawn Mowers Power Source Petrol Engine Start Type Recoil / Pull Start Speed Control Variable Speed Drive Type All Wheel Drive Blade Style Rotary Type Blade Engagement Electromagnetic Cut Width (Mm) 500 To 524 Minimum Cut Height 1 Millimeter Maximum Cut Height 26 Millimeter Blades Metallic Number Of Blades 1 Number Of Positions For Cut - Height Adjustment 2 Number Of Levers For Cut - Height Adjustment Single Lever Number Of Wheels 4 Front Wheel Size 200 Millimeter Rear Wheel Size 200 Millimeter Wheel Tyres Pneumatic If Yes, Grass Catcher / Collector / Bag Volume 88 Liter Engine Power Rating (Watt) 4000 To 4999 Engine Fuel Tank Capacity - 1 Ltr. , Pvc Pipe Supply Pvc Pipe Made Of Nylon With Braiding, Inner Diameter 30 Mm, Length Of Coil 30 Mtr. & Wall Thickness 3 Mm Up Of 1St Grade Pvc (As Per Sample) , Rain Gun Staineds Rain Gun Staineds: Anastain Jaguar Water Gun-Alluminium Alloy Body And Arm, Gun Matel Hex Nutt And Inlet Jeckt And Plactic Nozal. , Tryport Stand Tryport Stand: 1-1/2” Rain Gun Stained: 1-1/2” With Gi Riser 1-1/2” X 4 Fit.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Delhi View Result →
37.
Public Administrative Department #10291574 Price Bid
Supply Of Machinery, Pvc Pipe And Sprinkles For Various Parks At Daryaganj Ward No. 142, Central Zone , Hedge Trimmer Engine: 2- Stroke - Single Cylinder Air Cooled. Engine Displacement: Should Be Between 20-25 Cc Power Output: Should Be Minimunm 1 Hp Fuel Tank Capacity: Minimum 400 Ml Weight: Should Not Be More Than 6.0Kg Clutch: Clutch Linning Should Be Metal Only. Handle: Must Have Rotating Multi-Function Handle Anti Vibration System: Must Have Spring Loaded Technology For Anti Vibration System Design: Should Have Double Sided Blade With Tooth Spacing Minimum 35Mm Bar Length: Minimum 600 Mm Blade: Should Have Chrome Plated -Anti Corrsion. Stroke Rate ( L/Min): Minimum 3000 Vibration Level M/S2 At Right Handle: Should Not Be More Than 3.5 M/S2. Sound Pressure Level (Db..(A)): Should Not Be More Than 95 Certification: Should Have Tuv With En Iso 10517:2009 , Brush Cutter Engine: Single Cylinder, 2 Stroke, Aircooled Only Engine Displacement: 40.2Cc Power Output: 2Kw/2.7Hp Max Output Shaft Speed At Cutting Attachment: Should Be Minimum 9000 Rpm Carburetor: Diaphragm With Compensator Technology. Fuel Tank Capacity: Minimum 600 Ml. Weight( Dry,Without Cutting Attachment & Deflector): Should Not Be More Than 7.5 Kg Clutch: Centrifugal Type, Clutch Shoe Support Base & Liningmetal Only. Multi Function Handle: Should Have Acceleration ,On/Off Switch At Right Handle. Brushcutter Harness: Should Be Double Shoulder Harness Only. Anti Vibration System: Must Have 4- Point Aniti Vibration System. Vibration Level In M/S2 At Right Handle : Should Not Be More Than 2.5 M/S2 Sound Pressure Level Db(A): Should Not Be More Than 105 Db(A) Drive Shaft Design: Must Have Drive Shaft Ends Square Design Type Only. Certification : Must Have Valid En Certificaton , Operated Chain Saw Engine : Single Cylinder, 2 Stroke, Aircooled Only Displacement: 45.4Cc Power Output : 2.3Kw. 3.0 Hp Max.Engine Speed (With Guide Bar & Chain ): At Least 12500 Rpm Carburetor: Diaphragm Type & Compensator Technology. Fuel Tank Capacity: Should Be Minimum 450 Ml. Dry Weight( Without Cutting Attachment ): Should Not Be More Than 5.0 Kg Clutch: Clutch Shoe Linining Metal Only. Guide Bar Design: Should Be Rollomatic Type. Guide Bar Length: Guide Bar Length Must Have 50 Cm/20 Inch. Guide Bar And Chain: Should Have Same Manufacture Only. Chain Type: Every Drive Link Require Groove & Small Oil Receiver Hole For Better Lubrication. 0.325 Inch Pitch & 1.6 Mm Thickness Only. Chain Lubrication System: Fully Automatic ,Speed Controlled Rotary Oil Pump Chain Oil Tank Capacity: Should Be Minimum 200 Ml. Oil Pump Drive: Should Have Direct Drive From Crankshaft & Oil Pump Flow Adjustable. Master Lever Control: Must Have All Operation In One Hand, Chock,Throttle, Acceleration,Switch Off. Guaranteed Sound Power Level: Should Not Be More Than115 Db(A) Maximum Chain Velocity To Iso 11681: Should Be Minimum 28 M/S Certification: Productshouldhave Valid Dplf Certificate With Test Standard En Iso 11681. , Tree Pruner Supply Of Telescopic Pole Pruner:- Specification:- Pole Length Incuding Blade: 6.5M Blade Material: Hardened & Tempered High Carbon Steel .The Head Of The Blade Shall Have A Hooked Tip Useful For Cutting Twigs Saw Blade Shape: Hooked Type Curved Saw Blade Type & No Of Cutting Teeth :Tripple Grounded 86 Teethblade Length : 15-16 Pole Type: Light Weight Telescopic Tubular Aluminium Alloyextendable Poleno Of Positions For Pole Heightadjustment : 10 Positionslocking Mechanism : Ergonomicvally Designed Two Way Locking Mechanism Total Working Length : Max 219(6623 Mm), Min 103 (3103Mm) Branch Cutting Capacity: 200Mm Max , Lawn Mower Supply Of Lawn Mower:- Specification:- Type Of Machine Walk Behind Lawn Mowers Power Source Petrol Engine Start Type Recoil / Pull Start Speed Control Variable Speed Drive Type All Wheel Drive Blade Style Rotary Type Blade Engagement Electromagnetic Cut Width (Mm) 500 To 524 Minimum Cut Height 1 Millimeter Maximum Cut Height 26 Millimeter Blades Metallic Number Of Blades 1 Number Of Positions For Cut - Height Adjustment 2 Number Of Levers For Cut - Height Adjustment Single Lever Number Of Wheels 4 Front Wheel Size 200 Millimeter Rear Wheel Size 200 Millimeter Wheel Tyres Pneumatic If Yes, Grass Catcher / Collector / Bag Volume 88 Liter Engine Power Rating (Watt) 4000 To 4999 Engine Fuel Tank Capacity - 1 Ltr.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Delhi View Result →
38.
Drinking Water Supply and Sanitation #10280821 Price Bid
Execution of works required for providing functional house hold tap connection including, Pipe Line work, making house hold connection invillage Rajasani as per JJM guide line with one year defect liability period and hand over the system to VWHSC of village on the Risk & Cost= 1 Pipe Line WorkPHED BSR 20201.4 Providing, lowering, laying and jointing in trenches, standard lengths HDPEISI marked Pipes as per IS-4984: 1995 (amended upto date)with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe byelectro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) .Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply may be in coil or straight length in 6 M/12 M.HDPE PE-80PN-6 2 75 mm dia 3 90 mm dia 4 110 mm dia 5 Providing, lowering, laying and jointing in trenches, standard lengths HDPEISI marked Pipes as per IS-4984: 1995 (amended upto date)with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Supply of pipe shall be in straight length in 6/12 M. 6 125 mm dia 7 140 mm dia 8 160 mm dia 9 180 mm dia 10 PHED BSR 2020 / 1.11 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding,lowering,laying,aligning,fixinginpositionatalllevel/ depths in trenches complete includingall taxes, material,labour, inside lining, outside coating, testingandcommissioning alongwithpipelineaspertechnicalspecifications anddirection of Engineer-in-charge.MS pipespecialsupto600mmdia (withminimum5mmthickness sheet) 11 PHED BSR 2020 6.1 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesof approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitablesupport structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work.Manually Operated CI Sluice valve of Class PN-1.0 12 80 mm 13 100 mm 14 125 mm 15 150 mm 16 200 mm 17 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air ValveFlanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amendedupto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS , Seal ring and face ring - EPDM/NBR, Ends flanged according to IS:6418 or screwedtype shall have external pipe threads conforming to IS:554,Fasteners - CS.All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work.15 mm S-1 Type 18 PHED BSR 2020/4.1 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines,shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete forlifts up to 1.5 depth and strata as specified. The work also includesdepositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr. In all type of soil 19 In all type of soilFor HDPE pipe line dia up to 110 mm 20 For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. 21 For dia of pipe above 150 mm and up to 350 mm nominal. 22 In soft Rock For HDPE pipe line dia up to 110 mm 23 For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110 & up to 140 mm. 24 For dia of pipe above 150 mm and up to 350 mm nominal. 25 Dismantling of cement concrete pavement for pipe lineand chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be madeas per standard trench width specified in tender document and no extra payment shallbe made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. 26 PHED BSR 2020 4.2 Dismantling of cement concrete pavement for pipe lineand chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be madeas per standard trench width specified in tender document and no extra payment shallbe made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. 27 PHED BSR 4.3.1 Dismantling of flexible pavement for pipe lineand chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be madeas per standard trench width specified in tender document and no extra payment shall be madefor trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.Bituminous courses 28 Granular courses 29 PHED BSR 2020 4.4 Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be madeas per standard trench width specified in tender document and no extra payment shallbe made for trench width more than specified,complete work as per technical specification and scope of work. 30 Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be madeas per standard trench width specified in tender document and no extra payment shallbe made for trench width more than specified,complete work as per technical specification and scope of work. M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mmnominal size). 31 PHED BSR 2020 4.5.2 Removing& Re-fixing of Precast concrete interlocking blocks by manual, stacking of severciable & un serviceable material separately. disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of minimum 70 percent reusable precast concrete interlockingblock and cost of required new precast concrete interlocking block, alllead and lift as per general specifications.(Interlocking blockmanufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness: Less than 3.2 mm)80 mm thick. 32 Horizontal directional drilling (by trenchless technology) of suitable dia hole below natural ground level in all type of soil and pulling HDPE pipes of dia up to 110 mm, which are available in the form of a coilincluding excavation, shoring/ strutting, preparation, maintain the thrust and including excavation and refilling of drive pit and exit pit as per technical specification and scope of work. 33 Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved byauthority specification and the direction of the Engineer.Apply corrosion, resistant, protection on inside and outside of casing pipeas per technical specification. 300 mm Dia 8 mm thick casing pipe with protective coating. 34 FHTC Work PHED BSR 2020 1.19 Providing service connection as per technical specification and standard drawing as per relevant IS code (amended upto date) from all kind of water mains up to consumer Meter/ premises (completed job) this job includes digging out suitable size of pets and trench for laying service line in all kind of soil including demolition of cement concrete wbm, black top etc. of all thickness; cutting of CC road / Jhiri by using a concrete cutter machine; depositing and refilling of pit and Jhiri with watering and ramming/ compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 metre; providing and fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS clamp with saddle piece gunmetal ferrule 4.0 mm(ISI) make gun metalNRV (isi Make), valve( IS 778) and specials with mdpe pipe pe-80 pn-12.5 as per ISO 4427 below ground level andP&F GI pipe 15mm dia class B (ISI Mark) above ground level in the premises for fixing tap ( maximum lenth with flashing, cleaning, disinfecting and testing of pipe line complete required fo mtr.)P &fservice connection complete in all respect including mm bib cock with foam flow chrome plated with complete brass body including brass handle having good quality with wt 300to 325 gm including accessories with flushing ,cleaning, disinfection and testing of pipe line complete requried for making of service connection complete in all respect includinglabour charges. in addition to the ferrule and orifice of 4 mm dia should also be provided in the service line at the entry point of the consumers property in such a way that it should be accessible for inspection of VWSE,PHED and any other authortywhich would be like to be inspect as and when required the service line should be laid at least 45 CM below ground level, except in case of concrete bituminous roads where minimum depth Shal be 20 cm.For detailed specification of MDPE pipeS please refer section technical specifications of bid document. general specification of mdpe pipe shall be under:The raw material Shal be virgin PE-80 blue compound any comply with the requirement of ISO/directive of testing material; 9080with minimum required of strength of 8 kg/ per cm. The raw material shall be Food grade quality pressure rating Shall be 12.5 bar.The Pipe Shal bear iso marking 35 Average length up to 05 mtr 20mm dia MDPE pipe.and 02 mtr15mm GI PipeClass B
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
39.
Drinking Water Supply and Sanitation #10279059 Price Bid
Tender For Rehabilitation Improvement And Basic Facility Of Parbati Dam District Dholpur. - 5.1.2Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in all respect Hard / dense soil 2 Dismantling doors, windows and clear story windows (steel or wood) shutters including chowhats, architrave and holdfastsetc. Complete and stacking 50 m lead of area 3 square meter and below 3 Drilling more than 48 mm but upto 76 mm dia, holes in over burden hard soil compacted earth, morrum etc. for consolidation / curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required. From 5 to 10 m depth 4 Providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size.Welded mesh 50 x 50mm x 16 gauge 5 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 6 Providing & Fixing of of Double ball bearing, copper wounded capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible 3 core copper conductor ,making connections, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . WITH 225 mm sweep 7 SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. withStainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/work , refer Annexure A attached with this BSR . 0.5 HP, 1-Ø, (3 - 18)Mtr, (100-26) LPM 8 Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 1.5 TR ISEER not less then 3.8 9 Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for Superstructureincluding curing all leads of all construction materials including curing etc. complete. in cement sand mortar 1:4 10 Add extra over item No. 18 (b) for compaction in restricted area nearby structure or flanks by hand rammers or by pneumatic tampers. 11 Drilling more than 48 mm but upto 76 mm dia, holes in over burden hard soil compacted earth, morrum etc. for consolidation / curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required. From 10 to 15 m depth 12 Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.)By Mechanical Means: Grading- I (Using Screening Crushable type such as Moorum or Gravel)Using Screening Crushable type such as Moorum or Gravel 13 11.5.4Drilling more than 48 mm but upto 76 mm dia, holes in over burden hard soil compacted earth, morrum etc. for consolidation / curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required. From 15 to 20 m depth 14 Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60kg/sqm using mechanical means 15 Drilling more than 48 mm but upto 76 mm dia, holes in over burden hard soil compacted earth, morrum etc. for consolidation / curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required. From 20 to 25 m depth 16 Tack coat Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom 17 Drilling more than 48 mm but upto 76 mm dia, holes in over burden hard soil compacted earth, morrum etc. for consolidation / curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required. Beyond 25 m depth 18 Open - Graded Premix Surfacing (Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8- 10 tonne capacity, finished to required level and grades.)(I)a Case - I: Mechanical method using Penetration grade Bitumen and HMP of appropriate capacity not less than 75 tonnes/hour .Using VG-30 binder 19 Drilling more than 48 mm but upto 76 mm dia, holes in all types of rock or artificial hard material like concrete or masonry for consolidation/ curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required.Up to 5 m. depth 20 Providing and laying premix seal coat using hot mix plant and paver finisher with aggregates of 6.7mm size defined as 100% passing through 11.20mm sieve and retained on 2.36mm sieve with 0.09 cum per 10 Sqm and 4.5%bitumen including preparation and transportation of mix, spreading, laying and rolling etc. complete in all respect including cost of binder.(ii) Bitumen grade VG30 @ 4.50% 21 Drilling more than 48 mm but upto 76 mm dia, holes in all types of rock or artificial hard material like concrete or masonry for consolidation/ curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required.From 5 to 10 m depth 22 dismantling roofs with care including stacking of serviceable material and disposal of unservicable material within 50m lead for lime terrace 23 Supplying and lowering into holes and fixing of casing pipes of suitable diameter to enable drilling of minimum 48 mm dia grout holes. 24 dismantling stone slab roofing over wooden karries or RCC battens ( dismantling karries and battens to be paid for separately) including stacking of servicable material and disposal of unservicable material within 50 m lead 25 11.7Washing and open flushing of drilled holes by alternate jet of air and water under pressure prior to pressure washing and flushing or grout after stage grouting including cost ofequipment, compressed air and etc. complete. 26 Dismanling old plaster or skirting , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead 27 11.8Normal pressure washing of drilled hole in stages in approved pattern for cleaning of clay, soil and other filler materials from the seams and joints in the foundation rock by establishing connections under pressure with air & water including cost of equipment, accessories compressed air, water, labour, admixtures if any required etc. complete as per specification. 28 Dismantling flooring with care including stacking of servicable material and disposal of unservicable material within 50 m lead for: cement concrete flooring 29 5.16.1Earth work in rough (borrow area) excavation for embankments in hard soil, morrum or highly weathered strata dry or moist, including laying in 20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted by vibro compactor, vibro sheep foot roller, sheep foot roller/pneumatic tyred roller to obtain dry density of at least 98% of Standard Proctor s density with initial lift of 1.5m (Excluding charges for compaction and watering) including loading and un-loading wherever required complete in all respect.With initial lead of 250 m 30 Supply and fixing of steel doors, with frame of hollow metal pressed section 105×60 mm as per I.S.I 1.25mm thick with double sheet shutter 1.00 mm thick M.S. sheet tospot welded and embossed with rib type design on both sides, front side vertical and back side horizontal and spot welded including hold fasts of (15×3mm), M.S. oxidized fittings such as butt hinges sliding door bolts, handles, tower bolts etc. complete in all respect as per drawing and specifications including applying priming coat of approvedsteel primer 31 11.10Conducting water intake test in test holes under pressure for determining permeability before or after grouting including cost of equipment and water etc. complete 32 Earth work in excavation in foundation trenches or drains including dressing of sides & ramming of bottoms , lift up to 1.5 m including taking out the excavated soil & depositing & refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within lead of 50 m : all kind of soils 33 11.9Grouting of drilled holes minimum 35 mm dia with or without packers with cement/ clay and or chemicals (in the form of slurry with water) in prescribed ratio till refusal including cost of grouting equipment, compressed air and water etc. complete but excluding cost of cement, clay and chemicals (only dry weight of ingredients excluding chemicals to be considered ) with a working pressure upto 15 kg/Cm2 (Dry cement consumption) 34 Providing and laying in position cement concrete including curing, compaction etc.complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level: M10 grade nominal mix (with graded stone aggregate 20mm nominal size (P.C.C. in foundation) 35 16.33Exploratory vertical drilling of bore holes 150 mm dia through all kind of soils with the adequate / suitable equipments, tools and tackles for depths mesured below existing ground level including mobilization, setting up boring rig, shifting of rig from 1 bore hole to another and demobilization of the same 36 Random Rubble Stone masonry for superstructure above plinth level one storey height above 30 cm thick walls in: cement sand mortar 1:6 37 16.32.3Boring NX dia (54.7 mm dia), hole with diamond coring bits including taking out of core and arranging etc. core in proper order in core boxes including cost of core boxes. as per relevant I.S. code of practice. These rates are including Mobilization & demobilization of Rig. In sand stone and harder variety of lime stone 38 Filling available excavated earth ( excluding rock) in trenches ,plinth side of foundation etc. in layer not exceeding 20 cm. in depth , consolidating each deposited layer by ramming amd watering including lead up to 50 m and with all lift 39 5.1.3Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in all respect Hard soil mixed with Kankar / boulders, Morrum 40 Brick masonry in foundation and plinth with bricks of class designation 75 in: cement mortar (1:6) (1 cement : 6 coarse sand) , add extra for superstructure upto third storey 41 10.1.1Side shuttering including propping etc. complete (to achieve finish F 2 for :Block joints of foundation stilling basins buckets, aprons etc. (non -suspended horizontally laid massconcrete) 42 Providing and laying in position specified grade of cement concrete for RCC structural element upto floor three level including curing , compaction, finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of shuttering , centering and reinforcement for: Beams, suspended floors, roofs, girders having slopes up to 15degree, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircase and spiral staircases : M20 grade nominal mix/design mix Desc/Location Nos L B H 43 9.8.3Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 40 mm 44 centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of column etc up to plinth level 45 9.6.4Providing and Laying in position of Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto; 20 mm 46 P/F steel reinforcement for RCC work including cutting bending placing in position and binding complete including cost of binding wire in foundation raft footing step beams base of columns etc. upto floor three level .: Hot rolled deformed bar (IS : 1139) 47 7.1.2Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:4 48 PLASTER (Ceiling) 6 mm thick. Cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) 49 8.13.2Flush or ruled pointing on stone masonry including racking of joints and curing etc. complete including all leads of all construction materials in mortar ratio. In Cement sandmortar 1:4 50 PLASTER (Internal) Plaster on new surface on wall in cement sand mortar 1:6 including ranking of joints etc. complete fine finished 20 mm thick. 51 5.9.1Extra charges for disposal of excavated/re-handled material in required profile laid in uniform layers and given side slopes well dressed having layer thickness including loading and un-loading wherever required with cost of dewatering wherever required complete in all respectNot exceeding 15cm 52 Painting with enamel paint of approvd brand and manufacture to give an even shade : Two or more coats on new work 53 18.17.2Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 50 mm 54 Granding for roof water profing treatment with cement motor 1:4 (1 cement : 4 coarse sand) 2 inch thick 55 18.28.1.2Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458- 2003) in required size packed in gasket for hume or spun yarn & neatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 150mm NP3 56 Polished Blue kota stone flooring Skerting, Laid over 20 mm thick base of cement mortar 1:4 and jointed with Grey cement Slurry to match of the Shade of the Slab including rubbing and polishing complete for area of each slab from 2001 to 5000 sq. cm. 25 mm thick slab 57 11.19Reaming, redrilling and pressure jet flushing of foundation holes of NX size, in the drainage gallery of dam, using diamond drill bit of suitable size, diamond reamer shell with using hydraulically operated rotary core drilling equipments, rods of suitable length to specified depth, fixing PVC pipes with caps, including cost of materials, hire charges of equipments, fuel, labour with all leads and lift etc. complete as directed by Engineer in Charge 58 Providing brick kharanja in cement sand mortar 1:4 in square pattren over roof of ground floor (75 mm to 100 mm thick avarage) Add for if cement mortar 1 : 4 is used instead of lime sand mortar 1 : 2. 59 18.50Cleaning drainage gallery, adits, instrumentation galleries etc. by scrubbing/ brushing including chiseling and removing leached lime deposit and disposing off all the waste materialoutside adits in specified location as directed etc., complete with all leads and lifts. 60 Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish 20 mm thick Add extra over item No. 12.7 to 12.10 for water proofing compound if used @ 2% of the cement by weight. 61 9.8.4Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sandmortar 1:3 (1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher broken stone aggregate of maximum size upto 20 mm 62 Stone slab roofing on ground floor with fine grained stone slab from approved quarry including filling of joints of parapet and slab on both sides in cement sand mortar 1:4 ralthal, stone kharanja, lime terracing 90 mm avarage thickness [as per JAIPUR PRACTICE] with ceiling pointing in cement sand mortar 1:3 per specification for span:above 3.00 metre and upto 3.30 metre. 63 10.1.3Side shuttering including propping etc. complete (to achieve finish F 2 for :Retaining wall, counterfort, abutment, wing walls up stream or down- stream slope facings of dams and open faces of construction joints etc. 64 Providing and fixing T-iron frame for doors windwos and ventilators of mild steel tee-setions, joints mitred and welded with 15x3 mm lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 200 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butts hinges and screws and applying a priming coat of approved quality 65 10.9.2.2Supplying of M.S. reionforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leadsand lifts using. Tor or ribbed bars (IS :1786-1985) 66 window:Providing and fixing Ms sheet double leaf doors shutter in angle iron frame 35x35x5 mm suitabilly digonally braced with 25x3 mm flat iron above and below lock rail of size 50x5 mm beading extra including all fittings, as per direction of engineer incharge. M.S. Sheet 20 SWG 67 10.9.1Labour charges for steel reinforcement including bending, binding, and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts. 68 Doors:-Providing and fixing M.S. sheet 1 mm thick double leaf door shutter in angle iron frame 35x35x5 mm siutabilly diagonally braced with 25x3 mm flat iron above and below lock rail of size 50x5 mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chokhats: including two coats of anit-corrosive red oxide primer paint. M.S. Sheet 22 SWG 69 10.10.2Extra labour charges for RCC due to obstruction in laying and placing the reinforced cement concrete due to reinforcement. Columns, slabs, cantilevers projections staircases, lintels, beams, chajjas, Retaining walls, piers, abutments, galleries, arch covers, bed plates, sluice capstan bases etc. 70 Supplying & fixing fixed wire Gauge of 14 mesh X 24 Gauge to the Metal frame of rolled section by metal beading 20X3 with suitable screw at not exceeding 150 mm distance 71 5.8.1Re-handling of excavated material including loading unloading and dressing within initial lead of 50 m and lift of 1.5m with cost of de-watering wherever required and all applicabletaxes and levies etc. complete in all respect Earth / Soil 72 Providing and fixing square bars or other flat welded to window ventilators etc. 10mm x 10mm 73 5.18.2.2(ii)Compaction of earth or highly weathered strataBy mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor / vibro sheep foot compactor required as per site condition to obtain dry density of. at least 98% of Standard Proctor s density 74 Polished blue kota stone flooring skirting laid over 20mm thick base of C.M. 1:4 and jointd with grey cement slurry to match the shade of the slab including rubbing & polishing complete: for area of each slab from 901 to 2000 sqcm (a) 25mm thick slab 75 5.9.2Extra charges for disposal of excavated/re-handled material in required profile laid in uniform layers and given side slopes well dressed having layer thickness including loading and un-loading wherever required with cost of dewatering wherever required complete in all respect Not exceeding 20cm 76 Providing & fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. 77 5.10.1Beyond initial lead of 50 m & upto 250 m 78 Finishing wall with water proofing cement paint of approved brand & manufracture and of required shade to give an even shade including all scafolding new work (three or more coats) 79 5.30Supplying and laying sand of grade as per design requirement in required profile including all lead & lifts.This item is to be used only for laying filter / inverted filter 80 White washing with lime to give in even shade including all scaffolding on new work (three or more coats). 81 5.31.2Supplying and laying aggregate in layers and profile as specified including all leads & lifts.This item is to be used only for laying filter / inverted filterBroken ballast 20 to 40 mm size 82 P & F rigid PVC pipe (IS 4985 Mark) Class 2nd / (4 kg / sqcm) approved quality / Make including jointing the pipe with solvant cement rubber ring and lubricant 110 mm dia. 83 11.14Prepration of old masonry surfaces before laying of further masonry or concrete over it by cleaning the surface and mortar joints with brushing and raking finally, washing by compressed air & water under pressure 84 PVC bend 110 mm 85 37 mm thick shotcrete by wet mix process, applied with compressed air gun after chipping of defective concrete / masonry, racking the joints, cleaning of surface thoroughly with wet sand blasting after fixing of 9 gauge good quality rust free welded mesh of size 50 mm x 50 mm in TWO layers with anchors / clamps. After racking the joints clean the surface thoroughy by wet sand blasting, anchor the first layer of welded mesh in position and apply 15 mm cement concrete (1:2:1) by pressure gun and after hardening of first layer, anchor second layer of welded wire mesh, apply 22 mm thick cement concrete complete in all respect. Cement concrete comprising of cement, sand, coarse aggregate, water and quick setting compound in the proportion 1:2:1, sand and coarse aggregate conforming to IS 383 and table no. 1 of IS;9012 respectively. 86 Pointing on stone masonry in lime sand mortar 1:2 (1 lime putty : 2 sand) : Raised and cut pointing 87 11.18Add extra over item No. 16 &17 for each subsequent height 3.00 m or part there-of above initial lift of 5 m from ground level (upward or downward) 88 P & F unplasticized poly choride (UPVC) SWR pipe fitting type B for sciland waste discharge system ( IS : 13592: 1992 marked) of approved quality / make 110mm dia 89 12.30.3Providing Rubber seals as per IS:11855 for Dam sluice, canal, barrage, stop dam etc. gates of required size and type and specifications with testing, including all lead and lifts, packing & forwarding charges for all components etc. complete. Rubber seal musical note type 100mmx44mm x14mm (44mm Bulb) Tefloncladded 90 P&F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS : 2556 mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor : size530x410 mm 91 12.40Labour charges for removal of existing wornout/damaged bottom and side rubber seal of Stop Log Gate of Dam by cutting bolts with gas cutter, providing holes in new rubber sealinsertion of sleevs and fixing over gates with nut blots, washer ect including cost of gas (LPG and Oxygen) cylinder etc complete 92 P & F WVC wash basin (Ist quality, I.S. : 2556 mark) of approved make with C.I. brackets duly painted, 1 No. 15 mm C.P. pillar cock (IS : 8934 mark) & 32 mm C.P. brass waste coupling of approved make. 25 mm G.I. waste pipe complete including cutting & making good the wall : Size 450 mm x 300 mm 93 12.38Labour charges for removal of existing wornout/damaged bottom rubber seal of crest Radial Gates, Vertical Gates and Intake Service Well Gates of Dam by cutting bolts with gas cutter, providing holes in new rubber seal insertion of sleevs and fixing over gates with nut blots, washer ect including cost of gas (LPG and Oxygen) cylinder etc complete. 94 P & F G.I pipes (internal work) with G.I. fittings (IS:1239 mark) & MS clamps including cutting and making good the walls and floors : Exposed on wall A (i) 15 mm dia nominal bore 95 5.28.1Watering of earth including cost of carriage of water when source of water is up to 1 Km 96 Painting with enamel paint of approvd brand and manufacture to give an even shade : One or more coats on old work 97 12.39Labour charges for removal of existing wornout/damaged side rubber seal of crest Radial Gates, Vertical Gates and Intake Service Well Gates of Dam by cutting bolts with gas cutter,providing holes in new rubber seal insertion of sleevs and fixing over gates with nut blots, washer ect including cost of gas (LPG and Oxygen) cylinder etc complete 98 P & F PVC storage tank (IS : 12701 marked indicating the BIS license No), of approved make with cover, 25 mm dia 1M long G.I. over flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design : 300 litre capacity. 99 12.31.2Painting of Spillway gates, sluice gates, canal gates (both vertical or radial),stop log gates, exposed embedded parts and all un machined ferrous surface (hoist cylinders, cylinder heads, hydraulic piping, pipe fittings, bonnet covers), exposed to water as per IS 14177,for which surface preparation by blast cleaning of class B primer coat (one coat) of inorganic zinc silicate (preferably airless spray)or alternatively, two coats of zinc rich rimer(containing not less than 85% zinc on dry film) to give dry film thickness of 70 5 micron and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150 5 micron per coats. Thus, total dry film thickness of all the coats, including primer coating, should not be less than 350 microns, this will be include expenses on mobilisation and demobilisation of equipments. For maintenance painting the surface preparation shall be done by appropriate hand and power tool cleaning, prior to hand power tool cleaning. Any heavy layer of rust should be removed by chipping visible oil, grease, dirt and other foreign material be cleaned using solvents like clean mineral spirits, xylol or white gasoline. After hand and power tool cleaning the surface should be cleaned of loose dust and debris and/or blast cleaned as laid down in para 7.0 of IS code 14177. After the surface preparation the primer and finishing coats shall be carried out as provided above for painting etc. complete.Beyond 1.5m height 100 P & F stop cock (IS : 8931 mark), superior quality & of approved make : brass 400 gm. 15 mm nominal bore 101 12.31.2Painting of Spillway gates, sluice gates, canal gates (both vertical or radial),stop log gates, exposed embedded parts and all un machined ferrous surface (hoist cylinders, cylinder heads, hydraulic piping, pipe fittings, bonnet covers), exposed to water as per IS 14177,for which surface preparation by blast cleaning of class B primer coat (one coat) of inorganic zinc silicate (preferably airless spray)or alternatively, two coats of zinc rich rimer(containing not less than 85% zinc on dry film) to give dry film thickness of 70 5 micron and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150 5 micron per coats. Thus, total dry film thickness of all the coats, including primer coating, should not be less than 350 microns, this will be include expenses on mobilisation and demobilisation of equipments. For maintenance painting the surface preparation shall be done by appropriate hand and power tool cleaning, prior to hand power tool cleaning. Any heavy layer of rust should be removed by chipping visible oil, grease, dirt and other foreign material be cleaned using solvents like clean mineral spirits, xylol or white gasoline. After hand and power tool cleaning the surface should be cleaned of loose dust and debris and/or blast cleaned as laid down in para 7.0 of IS code 14177. After the surface preparation the primer and finishing coats shall be carried out as provided above for painting etc. complete.upto1.5m height 102 P & F looking mirrors with P.V.C. frame of approved (Atul, Modi Guard , Saint Gobin or equivalent) size 500 x 400 mm 103 18.13Painting distance mark stone and lettering with light blue white or yellow un-washable paint including cost of material 104 P & F flush cock/flush valve (IS 9758 mark) for WC of approved quality make : CP brass half-turn exposed 25 mm nominal bore. 105 12.37Oiling and greasing of Crest radial gates,Vertical Gates and Intake Service well Gates of Dam including all charges of man and material complete, which include cleaning of wire rope with petrol / diesel and applying Cardium compound to wire ropes, oiling & greasing etc complete as per direction of Engineer-in-Charge 106 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20 mm thick insider plaster in cm 1:6 , finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring, earth work etc. complete as per design including disposal of surplus earth with in a lead of 50 mtr. inside size 300 x 300 mm depth up to 0.5 m cement cover with frame. 107 12.4Design, Drawing, fabrication, supply, erection, testing and commissioning of Vertical lift sliding type gate with frame consisting of skin plate, sealing frame, stiffeners, horizontal and vertical girders, guide, stainless steel flat/Brass flat, rivets,wedges, lifting rods etc., with all accessories as per relevant IS code including frame & gate complete set for Canal Cross, Escape, Head regulator /Tank head regulator includingcost of all materials, machinery, labour, cutting, aligning, welding, finishing, cleaning, seal fixing, tools and tackles etc., applying two coat of zinc rich epoxy primer to give dry film thickness of 70 5 microns and finish coat (two coats) of solvent less coal tarepoxy paint using airless spray to provide dry film thickness of 150 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., complete as per specifications and approved drawings with all lead and lifts, including packing & forwarding, transportation charges for structural steel components and other materials. 108 Construction of soakage well in all types of soil of approved drawing, top 90 cm. Portion in 450 mm thick masonry with cm 1:6, 80 mm thick stone slab covering, jointing of slab in cm 1:3, Ralthal, Kharanja 40 mm thick M-15 grade C.C. flooring, earth work etc. complete including disposal of surplus earth with in a lead of 50 mtr. inner dia 90 cm & 10 to 12 mtr deep 109 11.13Preparation of surface of existing concrete surface/ masonry in lime mortar/ cement mortar including removal of organic deposit by washing with etching compound and use of wet sand blasting and final washing the surface with air and water jet including cost of all material and equipment required for the work complete. 110 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13753 colour such as white, grey, ivory, fume red brown, light green, light blue and other lightshades in floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing with flushpointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) Category-A : Kajaria, Jhonson, Somani make 111 12.52.1.11Providind of Rubber Seals as per IS 11855 for dams, sliuce, canals, barrage ,stop log gates etc of required size and type and specifications with testing , including all lead andlifts, packing and forwording charges for all components etc. complete in all respectRubber Seal Musical Knot, Solid Bulb type of Size 75mm 35mm x 10 mm 112 Add extra over item No 7.6.1 and 7.6.2 for using 400x400mm size MAT finished tiles inplace of 300x300mm size 113 12.52.1.9Providind of Rubber Seals as per IS 11855 for dams, sliuce, canals, barrage ,stop log gates etc of required size and type and specifications with testing , including all lead andlifts, packing and forwording charges for all components etc. complete in all respectRubber Seal Musical Knot, Solid Bulb with brass clading type of Size 100mm 45mm x 15 mm 114 Providing & fixing steel glazed doors, windows and ventilators with shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:2:4 (1-Cement:2-coarse sand:4-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws orwith fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. doors 115 12.49.2Oiling, Greasing work of gate parts like Headstock, Headstock parts, Roller Assembly, Operating Rod, Sealing Frame, Guide Tee with all Labor tools and tackles etc. and Materialfor vertical lift sliding type/ fix wheel gates excluding cardium compund and gear oil For gate size above 1 Sqm to 10 Sqm 116 Providing & fixing steel glazed doors, windows and ventilators with shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded incement concrete blocks 15x10x10 Cm. of 1:2:4 (1-Cement:2-coarse sand:4-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws orwith fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, ormetal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steelhandles and peg stay etc. as required.windows sidehung(openable) 117 5.33Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leads & lifts 118 Distempering with oil bound washable distemperr of approved brand and manufacture to give an even shade including all scaffolding : old work (one oe more coats) including scrapping surface and necessary repairs (a) colour change 119 12.36Operation of vertical / radial gates, hoist operation, stop log gates, Gantry Crane, mono rail etc. at Dams for all seasons round the clock whenever required, as per direction of Engineer in-Charge, by providing sk illed & semi skilled staff well conversant with the work of operation of gates as well as meet out all types maintenance & repair work of gates whenever required in any emergency during operation of the gates including deployment of Chowkidar at gate section of the Dam 120 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding : New work (two or more coats) over and includingscrapping and priming coat with cement primer 121 5.2.2Excavation including loading unloading disposal and dressing of excavated rock within initial lead of 50m and lift upto 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect.Hard rock not requiring blasting 122 P & F bib cock (IS : 8931 mark), superior quality of approved make : Brass 400 grm, 15 mm nominal bore 123 18.1.2Cutting & clearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick 124 P&F sand cast iron (S.C.I.) Pipe (IS:1729 mark) of approved make in wall in floor with MS holder bat clamps in 10X10X10 cm. M15 grade concrete block joints filled with CM 1:4 with spun yard including cutting holes and making good the wall.150mm dia. 125 17.5.2Demolishing stone rubble masonry including stacking of usable material and disposal of unuseable material within 50 meters lead inclusive of de-watering wherever required.In cement mortar 126 P&F SCI fittings (IS1729mark) in CM 1:4 spun yarn150mm w/o door Bend 127 5.2.3Excavation including loading unloading disposal and dressing of excavated rock within initial lead of 50m and lift upto 1.5m in dry or moist including dressing of excavated area, dewatering wherever required complete in all respect.Phylite & other hard rock requiring nominal blasting 128 spray painting with flat wall paint of approved brand and manufacture to give an even shade : two oe more coats on new work including priming coat of distemper primer of approved brandand manufacture 129 11.2.1Drilling 35 mm.to 48 mm. Dia holes in all types of rock or artificial hard material like concrete or masonary for consolidation/ curtain grouting in stages by percussion drillingincluding cost of drilling equipment, compressed air, water etc. complete & re-drilling in the hole through set grout, if required.Up to 5 m. depth 130 S&F following sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit with wall thickness according to IS Specified along with ISI marked (IS:14768 P-II 2003) accessories in recessed using saddles, clamps, fasteners, pvc bushes, check nuts, as required including cutting jhiris in the wall and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR. dia 50mm 131 11.2.2Drilling 35 mm.to 48 mm. Dia holes in all types of rock or artificial hard material like concrete or masonary for consolidation/ curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete & re-drilling in the hole through set grout, if required.From 5 to 10 m depth 132 S&Providing & Fixing of ISO certified company made off load change over switch four pole/two pole, 230/ 415 V ,side handle operated conforming to IS:13947 P-III in sheet steelenclosure complete with connections with lugs, testing etc. as required in the following rating: All as per pre approved by Engineer in charge. For additional technical parameters ofproducts/ work , refer Annexure A attached with this BSR . 32 A, Four poleF following sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit with wall thickness according toIS Specified along with ISI marked (IS:14768 P-II 2003) accessories in recessed using saddles, clamps, fasteners, pvc bushes, check nuts, as required including cutting jhiris in the wall and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR. dia 50mm 133 2.9.2Cement OPC (in bags) 50 Kg in weight. As per IS 1489 and IS 8112 (excluding cost ofempty begs). 134 S&PP & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nutand bolts as required. For additional technical parameters of product / work refer Annexure A attached with this BSRroviding & Fixing of ISO certified company made off load change overswitch four pole/two pole, 230/ 415 V ,side handle operated conforming to IS:13947 P-III in sheet steel enclosure complete with connections with lugs, testing etc. as required in thefollowing rating: All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 32 A, Four poleFfollowing sizes (dia.) of ISI marked ( IS:9537 P - II ) rigid steel conduit with wall thickness according to IS Specified along with ISI marked (IS:14768 P-II 2003) accessories in recessed using saddles, clamps, fasteners, pvc bushes, check nuts, as required including cutting jhiris in the wall and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR. dia 50mm 6.4 mmthick 135 10.2Centering and shuttering for slabs, beams, lintels Columns, trough with or without caps and base including propping and remove 136 P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/frames including making holes for switches etc, with brass screws, washers/ zinc plated nut and bolts as required. For additional technical parameters of product / work refer Annexure Aattached with this BSR 9 mm thick 137 11.1.1.1Drilling holes of 35 mm diameter for anchor rods.Upto 1.50 m. depth 138 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity(B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulsewithstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimumphase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including makingconnections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. Foradditional technical parameters of product / work refer Annexure A attached with this BSR (a) 6 Amp to 32 Amp rating 139 5.35.3Supplying stone, spall and laying R. R. stone pitching, hammer dressed with packing ofvoids from small stones including all lead & lifts, in required profile of 23 cm thickness ( 5 % thickness tolerance) 140 Providing corrugated G.I. Sheet roofing fixed with G.I.J. or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60o) & excluding the cost of purlins rafters and truses, for class of sheets :1.60mm thick 141 11.1.2Labour charges for Fixing of anchor bars in neat cement grout including cost of cement and curing etc. complete 142 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contactprotection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDAaccrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR Triple pole MCB 50/63 A rating 143 11.1.3Supply of Tor steel anchor bars of required diameter, length and shape at site of work complete. 144 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contactprotection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR (c) Double pole MCBS of 50 AMP to 63 AMP 145 12.7Design, Drawing, fabrication, supply, erection, testing and commissioning of Adequate capacity manually operated rope drum hoist according to relevant IS code, consisting ofhoist platform bridge, rope drums, connecting shaft, gear system unit, pulleys, wire rope, Gate position indicator, manual operation system, etc. complete, with all accessories for operating gates including cost of all materials, machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, greasing, oil filling, tools and tackles, applying two coats of zinc chromate red oxide primer and three coats of approved synthetic enamel paint etc., complete as per specifications and approved drawings, including packing & forwarding, transportation charges for all materials. 146 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door (Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel /CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including makingconnections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR 4 way Metal door (single phase) 147 12.1.1Design, drawing, fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sill beams, vertical tracks, vertical seal tracks, sealing frame, guide tracks/rails, wall plates, seal seats, anchors, anchor girders, yoke girders, tie flats, trunnion supports, rope and pulley supports etc. and any required necessary item, with all accessories as per relevant IS code, for all type radial gates/ Vertical lift fix wheel type sluice and Canal gates/Stop log gates including cost of all materials, machinery, labour, cutting,aligning, anchoring, welding, finishing, cleaning, tools and tackles, applying two coat of zinc rich epoxy primer to give dry film thickness of 70 5 microns and finish coat (two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thicknessof 150 5 microns per coat thus total dry film thickness of all coats, including primer coating, should not be less than 350 microns., including packing & forwarding, transportation charges complete item, as per specifications and approved drawings 148 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door (metal / Glazed )Distributio board with Metal end box made out from Galvanized steel /CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. Foradditional technical parameters of product / work refer Annexure A attached with this BSR 12 way Metal door (single phase) 149 18.49Under water videography of dam body & its appertunance i.e gates, under sluice, emergency gate grooves clearly showing location defect area or area of interest indicatingcondition from all possible angles and special focus on damaged portions complete in all respects upto the satisfaction of Engineer in charge. The work also includes supply of three sets of video in digital form and a depth wise report prepared in hard copy 150 Providing & fixing in position frame made out of MS angle (riveted or welded) finished with two coat of red oxide and enamel paint of following size as required 38*38*6 mm 151 12.8.1Design, Drawing, fabrication, supply, erection, testing and commissioning of Adequate capacity manually operated screw type hoist according to relevant IS code, consisting of supporting structure, platform bridge etc., operating handle, gate positionindicator, plumber block, couplings with all required accessories for operating Head/cross/escape regulator gate including cost of all materials, machinery, labour, tools and tackeles, cutting, aligning, anchoring, welding, finishing, cleaning, greasing, oiling, applying two coats of zinc chromate red oxide primer and three coats of approved synthetic enamel paint etc., complete as per specifications and approved drawings with all lead and lifts,including packing & forwarding, transportation charges for structural steel components and other materials. 152 Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. systemlumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0. 95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintanedtill life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall besubmitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR .600mm , Min. Lumens output 1800 lm LED Tube rod with Polycarbonate Housing 153 5.15.1.1Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all typessoils/ saturated soil such as morrum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m 154 Providing & Fixing of 240/415 V factory fitted RCBO with overload, short-circuit and earth leakage protection with ISI marked (IS12640-2)/ conforming to IEC 61009-1, breaking capacity 10 KA, provision for pad lock, min. Electrical operation 10,000 upto 63 A rating ,minimum phase termination capacity of 35sq.mm. , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR Four pole 100/300 mA sensitivity 40 A rating 155 7.1.3Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation includingcuring with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5 156 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulationPVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connectionswith Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parametersof product / work refer Annexure A attached with this BSR 1 *2.5 sq.mm 157 9.3.1Providing and Laying in position of Cement concrete Design mix M-25 including leads of all construction materials, plasticizers (if required), curing, compaction and finishing withrendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. Well graded crusher brokenstone aggregate of maximum size upto;(For mix design Cement content considered 420 kg/ cum of concrete) 150 mm 158 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connectionswith Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own inhouse NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 1*6.00 sq.mm 159 7.10.2Brick masonry (using well burnt clay bricks of size 230 x 110 x 70 mm, class designation 75 as per specification) up to plinth including all leads of all construction materialsincluding curing etc. complete. In cement sand mortar 1:4 160 Supply and erection of GI stay set confirming to pattern-1 of BS:16/1974 and as per latest Discom Specifications complete with stay rod with anchor plate fitted with cast iron crosshead and steel bow, in cement concrete 1:3:6 including excavation of pit-re-filling etc complete as reqd. All as per pre approved by Engineer in charge.For additional technicalparameters of product / work refer Annexure A attached with this BSR. Stay set of dia 16mm,1.8m long stay rod and anchor plate 300 x 300 x 4.0 mm 161 5.26Threading / turfing of grass on slopes of bunds etc. in rows 15 cm centre to centre in each direction including Ploughing, levelling, breaking of clods, and removal of stones etc. ifrequired including maintenance for 30 days or more till the grass develops fully with all leads and lifts complete 162 Add extra over item No. 10.25 for providing and fixing CGI sheets in curved roofing 163 8.2.1Plaster in cement sand mortar 1:4 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 20 mm 164 Supply and fixing of LT porcelain pin insulator as per IS 1445-1997 and as per Discomsstandard specifications,suitable for working voltage 1100 volts including all accessories like MS Forged GI LT Pin confirming to IS:7935/1975 (latest amended) Nut, Bolt etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR 100 mm x 70 mm 165 10.1.110.1 Supply, installation, testing and commissioning of MNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility ScaleSolar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR,showing arrangement of panel in available space, installation of PV module on MS frame as per approved design and drawings. Mounting structure shall be suitably designed towithstand wind velocity up to 150km/hr.Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of more than 98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in stringlevelmonitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty. All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive.The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. andsuitable provision shall be included in tender document.10.1.1 Solar panels up to 10 KW at a single location. 166 Supplying and drawing overhead steel core Aluminium conductor (ACSR) ISI marked(IS 398 part II-1996) on existing cross arms through insulator with all necessary T&P required including binding and twisting etc. complete in all respect as required. All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure Attached with this BSR 30 Sqmm of (6+1) 2.59mm (Weasel) 167 16.12Hire charges of DGPS instrument with operator and staff for bench mark shifting, topography survey, command area survey, canal survey, dam survey etc. and collection ofdata, plotting the details and preparing digital map of area in layers, and developing contours where ever required as directed by engineer in charge; including supply of detailed drawingsin appropriate scale in soft copy & three sets of Hard copy complete in all respect. These rates are including all types of taxes applicable 168 Providing & Fixing of 6 amp. Combined flush type non modular socket and switch set as per PWD specification for electrical Works,made out from industrial grade Polycarbonate or fireresistant ABS material including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parametersof products/ work , refer Annexure A attached with this BSR 169 16.14.1.3Transfer of Dam / Canal alignment from sajra map to the ground and taking Levels by Auto level or DGPS, develo ping L-section and X-section and submitting in hard copy threesets and soft copy in Auto Cad format, using layer system, showing all features. (Total length of L-section and X-section to be measured for payment) L-section of Dam/ Canal (ii) InPlain area - Levels for L-section to be taken at interval 30 meter. 170 Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheet steel with depth of minimun 30 mm and finished with powder coating and suitable for mounting LED tubeincluding side covers, holders , internal wiring to illuminate the single sided connection LED tube. ( Without tube). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . Suitable for 2 LED Tube shape fixture for single rod 171 16.14.2.3Transfer of Dam / Canal alignment from sajra map to the ground and taking Levels by Auto level or DGPS, developing L-section and X-section and submitting in hard copy threesets and soft copy in Auto Cad format, using layer system, showing all features. (Total length of L-section and X-section to be measured for payment) X-section of Dam/ Canal(Total length of X-section shall be measured) (ii) In Plain area - Levels for X-section be taken at interval 5meter 172 Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. B classwatering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lidsuitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternatelayers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter inmeasurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 173 16.10Grid survey at interval of 30 x 30 meter to conduct submergence survey with TS / DGPSinstrument and prepare 0.50 m interval contour plan and superimposing over khasra map including all ancillary works as described in specifications and conditions of contract. Note: Khasra map will be provided by Department Marking of existing FRL, MWL, MDDL contours and dam alignment. Prepare area-elevation and storage -elevation curves andtables. 174 Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0. 95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall besubmitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR .1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing 175 16.6.1Digitization of Jamabandi and providing excel sheet to the department Note: Jamabandi Register will be provided by Department 176 SITC of Radiator Cooled and Turbo charged Silent DG Set (As per latest CPCB emission norms) having specifications as per A, B, C, D, E, F,G,H & I 62.5 KVA at 0.8 pf 415V 50Hz 3-ǿ 177 16.6.2Digitization of Khasra map with details in layers and providing soft copy (acad file) Note: Khasra map will be provided by Department 178 SITC of PLC Based Auto main failure (AMF) Panel fabricated from CRCA sheet steel 2 mmThick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter& Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults,UPS, operator interface panel complete in all respect suitable for following capacity DG sets: Appropriate Test Certificate/ report of product/accessories from OEM/Panel Manufecturershall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ wo rk , refer Annexure A attached with this BSR . 50 to 82.5 kva 179 5.10.4Add extra for each subsequent lead of 1 km or part there of beyond 5 Km 180 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mmnominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS: 694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & its ISI marked (IS:14768P-II 2003) accessories, round tiles,Hot Dipped Galvanized Modular Box of 1.2 mm thick with earth terminal, 10A Modular switch,3 pin ceiling rose / holder / 3 way connector ,Modular faceplate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR i- shortpoint (upto 3 Mtr) 181 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mmnominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS: 694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & its ISI marked (IS:14768P-II 2003) accessories, round tiles,Hot Dipped Galvanized Modular Box of 1.2 mm thick with earth terminal, 10A Modular switch,3 pin ceiling rose / holder / 3 way connector ,Modular faceplate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR ii - Medium point (upto 6 Mtr) 182 11.5.1Drilling more than 48 mm but upto 76 mm dia, holes in over burden hard soil compacted earth, morrum etc. for consolidation / curtain grouting in stages by percussion drilling including cost of drilling equipment, compressed air, water etc. complete and re-drilling in the hole through set grout if required.Up to 5 m. depth 183 Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height.In flats, tees, angles and channels. 184 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mmnominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS: 694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & its ISI marked (IS:14768P-II 2003) accessories, round tiles,Hot Dipped Galvanized Modular Box of 1.2 mm thick with earth terminal, 10A Modular switch,3 pin ceiling rose / holder / 3 way connector ,Modular faceplate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR iii - Long point (upto 10 Mtr) 185 Rewiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVCinsulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & its ISI marked (IS:3419-1988)accessories, 1.2 mm thick MS box with earth terminal of required size, 6 A switch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked (IS:2036-1995) phenolic laminated sheet, Al.alloy /Cadmium plated iron/ brass screws, cup washers, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR :on board 186 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity(B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulsewithstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2,low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR 40A rating 187 P & F 1.2mm thick M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fanhook with 100 mm length extended on each side . All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR 188 Providing & Fixing of BEE Star rated copper wounded double ball bearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirementslaid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additionaltechnical parameters of products/ work , refer Annexure A attached with this BSR . 1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) 189 Providing & Fixing of IS 11037:1984 marked non modular socket size flush type 180 watt rotary minimum 5 step fan regulator with CM/L no. printed and made out from industrial gradePolycarbonate or fire resistant ABS material including making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parametersof products/ work , refer Annexure A attached with this BSR . 190 Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheet steel with depth of minimun 30 mm and finished with powder coating and suitable for mounting LED tubeincluding side covers, holders , internal wiring to illuminate the single sided connection LED tube. ( Without tube). All as per pre approved by Engineer in charge. For additional technicalparameters of products/ work , refer Annexure A attached with this BSR 191 Providing & Fixing of energy efficient /energy saving IP 20 LED direct retrofit Bulb in existing holder or fixture as required with system lumen efficacy ≥100 lm/Watt output ,pf 0.95 , CRI>70, minimum life time of minimum 25000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer Annexure A attacheded with this BSR. 9 watt 192 P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/ frames including making holes for switches etc, with brass screws, washers/ zinc plated nutand bolts as required. For additional technical parameters of product / work refer Annexure A attached with this BSR : 4.8 mm thick 193 Providing & Fixing of ISI marked (IS:1258) batten/angle lamp holder with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brassterminal & captive screwsincluding making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work ,refer Annexure A attached with this BSR 194 providing of 18mm wire rope galvanised 6x36 construction IWRC (steel core) RHOL (right hand ordinary lay) & tensile strength of 1960 N/mm confirming to IS :2266/89 195 Chair type 7 {Revolving chair medium back, support backrest symmetrical lumber support, back cover mesh fabric) (inclusive all taxes) 196 Dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. 197 Providing laying, spreading and compacting stone aggregates of specific sizes as per Table 400-7 to Water Bound Macadam specification including spreading in uniform thickness; handpacking, rolling with power roller 8-10 tonnes, in stages to proper grade and camber, applying and brooming requisite type of screening (Table 400-8) binding materials to fill up theinterstices of coarse aggregates, watering (with water browser) and compacting to required density, making necessary earthen bund to protect edges as per clause 404 of MoRT&Hspecification including all material, labour, machinery, lighting, guarding and maintenance of diversion complete : Crusher broken Grade II (63-45 mm) 198 Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specificationincluding all material, labour, machinery, lighting, guarding and maintenance of diversion 199 Chair type 4 {chair type with arms,frame type 4 legs,castors without (inclusive of all taxes)} 200 Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fineaggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuousoperation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour,machinery, lighting, guarding and maintenance of diversion. PCC M-25 201 Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS R number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety . Input Frequency 50Hz±3%, Power Factor >0.95 ,driver Efficiency >85% , THD(I) <10% , driver current <1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be rovided, Surge Protection Min >=4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index >70 and CCT 5700K ±355K. Driver current <1000mA shown in LM79 report. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow raceability/authenticity. Fixture shall be IS 10322 Complianced. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures . (LM79/LM80) certificate/report with liable warranty of product/accessories from OEM shall be submitted . All as per approved by Engineer In charge . for additional technical parameters of products/works . High Power LED Flood 202 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. M.S tube 203 Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. 4 meter 204 Supply, Erection and Fixing of hot dipped galvanised M.S. Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles. All as per pre approved byEngineer in charge. For additional technical parameters of products/ work . Double arm overhang 205 providing of 24 mm wire rope galvanised 6x36 construction IWRC (steel core) RHOL (right hand ordinary lay) & tensile strength of 1960 N/mm confirming to IS :2266/89 206 Supply installation testing & Commissioning of ISO certified company made high mast lighting system (as per PLG 07 of ILP UK techinical report no 7 of ILE UK /IS:875 Part-1 –2015//BSEN10025/and IS:2062 )consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm (excluding luminares), mast head frame assembly with full cover, including 1 No. LED 15 Watts aviation obstruction lights, double drum type self sustaining winch, inte gral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, S.S. ropes (AISI 316, 7 / 19 costruction ), EPR insulated PCP sheathed trailing cable, including outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required as per IS 456/IS 2911. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. ( See table P - 03 for specs.) OEM must have type test certificate for wind tunnel test for high mast fixtures , complete in all respect .All asper pre approved by Engineer in charge ,for additional technical parameters of products/work. 16.0 Mtr HM(in 2section) 207 Labour charge for removing old wire ropes and fixing of new wire ropes with all accessories and T&P etc complete 208 oiling & greasing of gantry crane on Parbati Dam Which includes complete Removal of all old worn out & broken down parts, cables, connections etc complete checking of all copper wiring, all wiring & connections control panel , all switches etc complete with all material , labout, T&P and lead and lift complete in all respect 209 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approvedbrand or manufacture 210 Providing and fixing of precast concrete interlocking tiles of desired shape of M 30 grade manufactured from fully computerized automatic stationery hydraulic vibrio pressed machine and fully computerized automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50mm. thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer in charge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. Tensile splitting strength, abrasion and braking load etc. as per BS 6717:2001, Grey cement. : 80mm thick 211 Table type 3 (storage provided one side,length of table top-1200 mm, depth of table top-600 mm) 212 Providing sofa set(Frame covering fully upholstered, Total No of seats in sofa set -4, covering material for seat and back rest-leatherite) 213 Table type 5 (seating capacity - 8 seater, width in mm -1200, Length in mm - 2400mm, shape of table top Rectangular , height in mm - 750 mm ) (inclusive all taxes)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Rajasthan View Result →
40.
Road Transport and Highways #10265872 AOC
Tender For Restoration At Km.1/740-2/320 Of Thudiyalur-Maruthamalairoad (M 984); 1 Earthwork excavation in all classes of soils except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour charges, materials, tools, equipments and all incidental charges, removal of other deleterious matter and obstructions, trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials etc., complete as per standard specification. For Boxing including conveyance of cut earth away from the site with average lead 2 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory soil compactor to achieve the desired density, complete as per clause 401 - For Grading-V Material (Filter/ Separation Layer at Bottom) 3 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory soil compactor to achieve the desired density, complete as per clause 401 - For Grading-III Material (Drainage layer at top) 4 Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory soil compactor to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 5 Providing and laying Prime Coat over WBM/ WMM surface using 7 Kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 502 of MORTH Rev-5 6 Providing and laying Tack Coat over WBM/ WMM surface (treated with primer) using 2.50 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over itincluding cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 503 of MORTH Rev-5 7 Providing and laying Tack Coat over Dry lean cement surface using 3.00 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over itincluding cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 503 of MORTH Rev-5 8 Providing and laying Tack Coat over Existing BT surface using 2 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 503 of MORTH Rev-5 9 Providing, laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20Kgs of VG30 Grade bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen, aggregate and mixing them in the required temperature in Central Hot Mix Plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm using paver to the specified grades and cross sectionsandcompacted by Vibratory / Pneumatic Roller to the required density etc.,including labour for attending to paver at site etc., including hire and fuelcharges for 20-30ton CMPwith bitumen boiler, tipper trucks, Paver Finisher, Vibratory rollers and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 Grade-II 10 Providing and laying Bituminous Concrete to 30/40mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 11 Calculation of SubTotal, GST and Total Amount carried out by system automatically 12 Basic cost of value put to tender as per estimate 13 Add GST at 18% 14 Total Value put to Tender 15 Differnce Amount (Excess/less) 16 Quoted Amount (Basic Rate Only) 17 Add GST at 18% of Quoted Amount 18 Total Value of Quoted Amount including 18% of GST 19 Basic cost of value put to tender as per Estimate 20 Quoted Rate in Figures (Total Value of Quoted Amount Including 18% of GST )
Contract Date: Sep 18, 2025 Contract Value : ₹ 43.15 Lakh
Government Departments No of Bidders 2
Tamil Nadu View Result →
41.
Road Transport and Highways #10265869 AOC
Tender For Restoration To Ganapathy Kanuvai Road (Via) Maniyakarampalayam And Kasinanjegoundanpudur Road Km.9/300-9/800 (M 977); 1 Earthwork excavation in all classes of soils except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour charges, materials, tools, equipments and all incidental charges, removal of other deleterious matter and obstructions, trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials etc., complete as per standard specification. For Boxing including conveyance of cut earth away from the site with average lead 2 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory soil compactor to achieve the desired density, complete as per clause 401 - For Grading-V Material (Filter/ Separation Layer at Bottom) 3 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory soil compactor to achieve the desired density, complete as per clause 401 - For Grading-III Material (Drainage layer at top) 4 Wet Mix Macadam (Table 400-13) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, Complete as per clause 406 of MORTH Specification. 5 Providing and laying Prime Coat over WBM/ WMM surface using 7 Kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 502 of MORTH Rev-5 6 Tack coat - Providing and applying tack coat with bitumen emulsion (RS-I type) using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per clause 503 of MORTH Specification- over granular surfaces treated with primer 7 Providing and laying Tack Coat over Dry lean cement surface using 3.00 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over itincluding cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 503 of MORTH Rev-5 8 Providing and laying Tack Coat over Existing BT surface using 2 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 503 of MORTH Rev-5 9 Providing, laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20Kgs of VG30 Grade bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen, aggregate and mixing them in the required temperature in Central Hot Mix Plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm using paver to the specified grades and cross sectionsandcompacted by Vibratory / Pneumatic Roller to the required density etc.,including labour for attending to paver at site etc., including hire and fuelcharges for 20-30ton CMPwith bitumen boiler, tipper trucks, Paver Finisher, Vibratory rollers and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 Grade-II 10 Providing and laying Bituminous Concrete to 30/40mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 11 Calculation of SubTotal, GST and Total Amount carried out by system automatically 12 Basic cost of value put to tender as per estimate 13 Add GST at 18% 14 Total Value put to Tender 15 Differnce Amount (Excess/less) 16 Quoted Amount (Basic Rate Only) 17 Add GST at 18% of Quoted Amount 18 Total Value of Quoted Amount including 18% of GST 19 Basic cost of value put to tender as per Estimate 20 Quoted Rate in Figures (Total Value of Quoted Amount Including 18% of GST )
Contract Date: Nov 04, 2025 Contract Value : ₹ 42.50 Lakh
Government Departments No of Bidders 2
Tamil Nadu View Result →
42.
Agriculture #10245360 Price Bid
Machinery And Equipments Supply Of Machinery And Equipments , Machinery And Equipments , Twin Pulper: The Twin Stage Pulper Ensures Double Stage Pulping And Refining Of The Pulp From Various Fruits. Consists Of 2 Pulpers Basic Structure Of S.S 1St Stage Of It Is Fitted With 1 / 16” Sieve. The Products Gates Pulped In The 1Ststage Then Flows In The 2Nd Stage Which Is Fitted With 1 / 36” Or 1 / 48” Sieve ( As Per Requirement ) . Total Load ( Power ) Of Is 8Hp. Top 1St Stage Shp & 2Nd Stage Of 3Hp. Complete Made Of Stainless Steel Aisi-304. Capacity Of Is 1 Tones P / Hr Of Cherries, Plums And Strawberries. , Extra Sieve , 1 / 16”Sieves , 1 / 32”Sieves , Steam Jacketed Kettle: Mounted On A Mild Steel Stand With Tilting Arrangement Through Warm Gear / Pinion. Jacket And Pan Made Of 10 / 10 Swg Stainless Steel. Complete With Pressure Gauge, Safety Valve, Steam Trap. The Kettles Are Double Jacketed For Maximum Stream Utilization And Efficiency. Keettles Tilting Type:50 Gallons 225 Litres. , Induction Sealer: Non Contact Induction Sealing Machine. With Conveyor System, You Have To Place The Bottles With Cap On Conveyor And It Will Get Sealed Automatically, With Air Cooled System. , Lug Cap Sealing : Pneumatic Operated, Equipped With Pneumatic Cylinder, Provides Constant Pressure On The Cap And Then With Gentle Twist Of Handle The Cap Gets Sealed. , Labelling Machine , Numex Stamp , Vacuum Packing Machine: Double, Chamber Size-500Mmx40mm, You Have To Pur The Pouches Into The Chamber And Closed It Withing Seconds It Will Vacuum And Seal Perfectly. Capacity -30Ppm , Refractometer: Made Of Stainless Steel With Metal Prism 0 To 45. , Refractometer: Made Of Stainless Steel With Metal Prism 45 To 86. , Working Table: Top Stainless Steel 304. With Adjustable Legs. Approx. Size 6’X3’X3’ ( Ft ) M.S Frame Work. , Pulper Juniorbody And All Contact Parts Made Of Stainless Steel With One Sieve ( 1 / 32 ) And Centre Shaft Made Of Stainless Steel. With 1Hp, Single Phase, 440 Volts Motor. Capacity ½ Ton Tomato Per Hour. , Fruit Millall Contact Parts Made Of Stainless Steel With 1 Hp, 3 Phase, 440 Volts Motor, Capacity Approx. 23000 Kgs Per Hours. , Diesel Generator Set 25 Kv A25 Kva Prime 3Hp Silent Dh Set With Commins Generator, Stamford Alternator On Common Base Frame, Suitable For Operation At 1500 Rpm, 415 Volts, 50Hz, 3 Phase 4 Wire System, Confirming To Bs 5000 / Is 4722, Alternator Brushless Type Screen Protected. , Pulper No. 100Made Of Stainless Steel Body And One Sieve And Centre Shaft Made Of Stainless Steel With ½ Hp Motor. Capacity Aprox. 80 Kgs Tomato Per Hour. , Hydraulic Juice Press 25 Tonnes Pressure, Rack And Cloth Type, Without Rack And Cloth. Synthetic Cloth And Racks Will Be Supplied At Extra Cost. Tray Cover With Aluminum Sheet, Completed With 2 Hp Motor And Hyd. Pump With M Steel Handle. , Super Crown Corking Machineheavy Duty Hand Operated, With Magnetic Cork Holder Table Model With M Steel Handle. , Bottle Washing Machine Two Heads ( Two Brushes ) ( Two Brushes ) With Two Tanks, 8 Rinsers, Complete With ¼ Hp Motor. , Reforming Unitconsisting Of Rotary Flat Body Reformer And Hand Flanger. Capacity Approx 600 / 800 Cans Per, Hour. Equipped With 1Hp, 3 Phases, 440 Volts Motor And Stater. Cost Of Flanging Dies And Rubber Mandrels Will Be Extra , Double Seaming Machine 1 Ads, M-83Mounted On Mild Steel Stand. Capacity Approx. 600 Cans Per Hour, Equipped With 1Hp, 3Phase, 440 Volts Motor And Starter. Cost Of Seaming Chuks & Roller Will Be Extra. ( If Single Phase Motor Is Required Rs, 2000 / -Will Be Charged Extra ) , Hand Can Seamer ( M.B Type ) With 401 ( A2-1 / 2 Size Can Tools ) . , Treadle Lid Embossing Machinedesigned To Emboss Can Lids Without Damaging The Tin Coating Without Alphabets And Numerals & With 2 Row 6 Digit Die. , Fully Automated Lined Carton Packaging Machine Suitable For 200Ml, 500Ml An 1000Ml With Packing Material Of Liner Carton. Easy To Install, Easy Change Over, Main Drive With Safety Clutch, Safety Switches To Prevent Accident And Breakdown. All Motors Are Of Reputed Company , Refrigerator Samsung Double Door Convertable Fast Cooling Fridge 600 Liters’ Of Having Isi Mark With 4 Star Ratings.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Ladakh View Result →
43.
Drinking Water Supply and Sanitation #10236715 Price Bid
Augmentation Cum Reorganization Of Aapni Yojana Phase I Churu Bisau Feeder Water Supply Project Including 10 Years O And M District Churu.- 1 Part A : Cost Estimate For Pipeline Works 2 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 3 75 Mm Dia 4 90 Mm Dia 5 110 Mm Dia 6 125 Mm Dia 7 140 Mm Dia 8 160 Mm Dia 9 180 Mm Dia 10 200 Mm Dia 11 225 Mm Dia 12 100 Mm Dia 13 150 Mm Dia 14 200 Mm Dia 15 250 Mm Dia 16 300 Mm Dia 17 Providing, Lowering, Laying In Trenches, Aligning, Fixing In Position And Jointing Ductile Iron ( Di ) Isi Marked K-7 Grade S&S Pipes As Per 15:8329-2000 ( Amended Upto Date ) , With Internal Cement Mortar Lining Suitable For Potable Water With Rubber Ring ( Epdm ) Joints As Per Is: 5382- 1985 Including All Taxes ( Central And Local ) , Transportation And Freight Charges, Inspection Charges, Loading / I.I Unloading Charges, Including Cost Of Labour And Material, Specials ( Tee, Bend Etc. ) Satisfactory Hydraulic Testing, Disinfection Etc. Complete As Per Technical Specifications And Direction Of Engineer-In Charge. ( Excluding Earth Work ) Note : Providing And Fixing Of All Requisite Specials As Per Drawing, Design And Layout Are Inclusive In Rm Measurement Of The Item And Shall Not Be Paid Separately. 18 100 Mm Dia 19 150 Mm Dia 20 200 Mm Dia 21 250 Mm Dia 22 300 Mm Dia 23 Providing, Lowering, Laying In Trenches, Aligning, Fixing In Position And Jointing Ductile Iron ( Di ) Isi Marked K-9 Grade S&S Pipes As Per 15:8329-2000 ( Amended Upto Date ) , With Internal Cement Mortar Lining Suitable For Potable Water With Rubber Ring ( Epdm ) Joints As Per Is: 5382- 1985 Including All Taxes ( Central And Local ) , Transportation And Freight Charges, Inspection Charges, Loading / I.I Unloading Charges, Including Cost Of Labour And Material, Specials ( Tee, Bend Etc. ) Satisfactory Hydraulic Testing, Disinfection Etc. Complete As Per Technical Specifications And Direction Of Engineer-In Charge. ( Excluding Earth Work ) Note : Providing And Fixing Of All Requisite Specials As Per Drawing, Design And Layout Are Inclusive In Rm Measurement Of The Item And Shall Not Be Paid Separately. 24 150 Mm Dia 25 Providing, Lowering, Laying And Jointing In Trenches, Standard Lengths Hdpe Pe- 80 Pn-6 Isi Marked Pipes As Per Is-4984:1995 ( Ammended Upto Date ) With Neccessary Jointing Material Like Mechanical Connectors, I.E. Thread / Insert Joint / Quick Release Coupler Joint / Compression Fitting Joint Or Flanged Joint And Specials Jointing Pipe By Butt Fusion / Electro Fusion Welding Method, Including All Taxes, Transportation And Freight Charges, Inspection Charges, Loading / Unloading Charges, Stacking Of Pipes, Including Cost Of Labour And Material, Specials ( Tee, Bends Etc. ) , Satisfactory Hydraulic Testing, Disinfection Etc. Complete As Per Technical Specifications And Direction Of Engineer-In-Charge Of Following Class And Diameter. ( Excluding Earthwork ) 26 75 Mm Dia 27 90 Mm Dia 28 110 Mm Dia 29 125 Mm Dia 30 140 Mm Dia 31 160 Mm Dia 32 180 Mm Dia 33 200 Mm Dia 34 225 Mm Dia 35 Providing, Lowering, Aligning, Fixing In Position And Jointing In Pipe Line, Combination Air Release Valve Kinetic Type With Single Chamber Housed Double Orifice And Have 3 Functions, Large Air Exhaust, Small Air Venting And Large Air Intake During Vacuum Of Pipeline Of Approved Makes Of Following Pressure Rating And Dia And As Per Following Specifications:Governing Standard - Awwa C512 , Body And Bonnet Of Ductile Cast Iron Of Grade Ggg40 / Ggg50 As Per Din 1693 Or Gr Sg-400 / 12 As Per Is 1865, Float & Internal Trim: Aisi 304 Stainless Steel, Seat Ring & Gasket - Epdm / Nbrdrilled As Per Is:1538. Electrostatic Epoxy Powder ( Ep-P ) / Fusion Bonded Epoxy ( Non-Toxic & Suitable For Drinking Water ) Coated With Minimum Thickness Of 250 Micron Applied On Body & Coverinside And Outside Fasteners - Cs / Galvanised Steel , Outlet Of Big Orifice Will Have A Screen To Prevent Tamper Of Float, Big Orifice Size Should Be Equal Or Larger Than The Inlet Flange Bore, For Fully Comply With Awwa C512. ) , Valve Including All Material, Labour, Testing And Commissioning As Per Technical Specifications And As Per Direction Of Engineer In Charge.Note: Rates Are Exclusive Of Connecting Tee, Pipe Piece And Earth Work. 36 50 Mm Dia 37 Construction Of Air Valve Pillar For Fixing Of Air Valves 38 Providing, Lowering, Aligning, Fixing In Position In Pipe Line At Work Site, Di D / F Resilient Seated ( Soft Seated ) Sluice Valves ( Gate Valves ) , Vacuum Tight ( Bubble Tight ) , Straight And Pocket Less Body Passage Of Approved Make Of Following Class & Dia Complete Confirming To Bs-En-1171 / Awwa C-509 And Of Following Specifications: Body & Bonnet Of Ductile Cast Iron Of Grade Ggg40 / Ggg50 As Per Din 1693 Or Gr Sg-400 / 12 As Per Is 1865 Or Equivalent Grade As Per Is :3896-Part2-1985 And Subsequent Revisions, Wedge Of Same Material As Body & Shall Vulcanisedrubber Lined With Epdm ( Food Grade Quality ) And Seals Of Nbr Face To Face Dimensions As Per Bs 5163-89 / Is 14846 / 2000 ( Amended Up To Date ) / Din 3202 F4, Stem / Spindle Of Ss ( Aisi 316 Or Equivalent ) Electrostatic Epoxy Powder ( Ep-P ) / Fusion Bond Epoxy ( Non-Toxic- Suitable For Drinking Water ) Coated With Minimum Thickness Of 250 Microns Inside And Outside, Drilled As Per Is 1538. Nut-Bolt Confirming To Is:1363 And Is: 1367 ( Galvanised Steel ) Insersion Rubber Of Black Epdm 6Mm Thick. Suitablesupport Structure As Per Directions Of Eic, Sluice Valves Including All Jointing & Jointing Material, Labour, Testing And Commissioning Along With Pipe Line As Per Technical Specifications And As Per Direction Of Engineer-In-Charge. Note: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work.Manually Operated Resilient Seated Sluice Valves Of Class Pn 1.0 / 1.6 39 100 Mm Dia 40 150 Mm Dia 41 200 Mm Dia 42 Providing, Lowering, Aligning, Fixingin Positionin Pipeline, Cid / Fsluicevalvesof Approved Make Of Following Pressure Rating & Dia Complete, Confirming To Is:14846 ( Amended Up To Date ) And Of Following Specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand Wheel Of Grey Cast Iron Of Is:210 / Fg200stem - Ss 304 , Body Seat Ring, Wedge Facing Ring & Bushes - Ltb2 / Ss, Face To Face Dimensions As Per Is 14846 / 2000 ( Amended Up To Date ) , All Exposed Machined Ferrous Surfaces Shall Be Painted With One Coat Of Aluminium Red Oxide Primer Conforming To Is:5660 And Two Coats Of Black Japan Paint Conforming Totype B Of Is 341Or Paint Conforming To Is9862 Or Is2932 ( Non-Toxic- Suitable For Drinking Water ) Applied Inside And Outside, Flanges Drilled As Per Is 1538.Nut-Bolt Confirming To Is:1363 And Is: 1367 / Cs / Galvanised Steel.Insersion Rubber Of Black Epdm 6Mm Thick . Suitablesupport Structure As Per Directions Of Eic. Sluice Valves Including All Jointing & Jointing Material, Labour, Testing And Commissioning Along With Pipe Line As Per Technical Specifications And As Per Direction Of Engineer-In-Charge. Manually Operated Ci Sluice Valves Of Class Pn 1.0 Note: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work. 43 80 Mm Dia 44 100 Mm Dia 45 125 Mm Dia 46 150 Mm Dia 47 200 Mm Dia 48 250 Mm Dia 49 300 Mm Dia 50 Cosntruction Of Valve Chamber For Sluice Valves, Flow Control Valve And Butterfly Valve As Per Approved Drawing And Specifications To The Satisfaction Of Engineer-In-Charge 51 Type - A ( 80 Mm To 100 Mm Dia ) 52 Type - B ( 125 Mm To 200 Mm Dia ) 53 Type - C ( 250 Mm To 350 Mm Dia ) 54 Construction Of Village Transfer Chamber As Per Approved Design, Drawing & Specification Given For Material Of Construction And Completion Of All Works Of Installation Of Sluice Valves, D.Joints, C.I. Pipes, Specials ( Excluding Supply ) Etc. Complete In All Respect To Achieve The Work As Given In The Scope Of Work. 55 Providing, Lowering, Laying, Aligning, Fixing In Position And Jointing Ci Dismantling Joint ( Suitable For Sluice Valves Etc. ) As Per Is Specifications Complete Of The Following Sizes Including All Jointing Material, Cost Of All Labour, Testing And Commissioning As Per Technical Specifications And As Per Direction Of Engineer. 56 100 Mm Dia 57 150 Mm Dia 58 200 Mm Dia 59 250 Mm Dia 60 300 Mm Dia 61 Construction And Commissioning Of Rcc Intze Type Over Head Service Reservoir Of Following Capacity And Staging As Per The Scope Of Work And Technical Specifications, Consisting Of The Following Main Activities: - 62 A ) Topographic Survey, Preparation Of Site Contour Plan, Conducting Sbc Testand Its Approval From Departmentbefore Construction. Submission And Approval Of Concrete Mix Design And Water Quality Test Report For Water To Be Used In Construction. B ) Excavation In All Types Of Soil, Pcc Below Foundation, All Rcc Work, Plinth Protection All Around The Structure Including All Material, Labour, Shuttering, Scaffolding Etc.C ) Ohsr Shall Be Provided With Adequate Plinth Protection All Around The Structure In A Width Starting From Edge Of Structure At Gl And Extending At Least Up To 1.0M Beyond The Edge Of Outer Most Projection Of Ohsr.The Plinth Protection Shall Consist Of 150Mm Thick Pcc In M-15 Grade Concrete Laid Over 150Mm Thick Layer Of Compacted Soil.D ) Providing And Applying Two Coats Of Food Grade Epoxy Paint On The Inside Surface On The Top Dome, Edge Beam And 600 Mm Height Of The Vertical Wall.E ) Conducting Successfully Hydro Test And Water Tightness Test As Per I.S. Code.F ) Providing And Applying Three Coats Of Anti-Carbonation Paint On The Top Surface Of The Top Dome.G ) Providing And Applying Three Coats Of Cement-Based Paint On The External Surface Of The Container, Balcony, Cone Wall, Columns & Beams Etc..H ) Providing And Fixing Ss-304 Ventilator, Ss 304 Manhole Frame And Cover And Ss-304 Ladder From Top Dome / Slab To Bottom Dome / Slab Inside Container. I ) Providing And Fixing Of Ms Section Ladder From The Last Landing To Balcony Having Railing All Around It And Ms Ladder With Safety Cage From Balcony To Top Dome / Slab.J ) Providing And Fixing Water Level Indicator ( Float Type ) . 63 K ) Providing And Fixing Of Hand Railing All Around The Balcony, Top Dome And Staircase Consisting Of 25Mm Diameter Class-B Gi Pipe In Two Rows And 1000 Mm High, 50X50x6mm Angle Iron Vertical Post At A Maximum Spacing Of 1500Mm Centres.L ) All Ms Parts To Be Painted With Two Coats Of The Enamel Paint Over The Primer Coat Of Red Oxide.M ) Providing And Fixing Of 150Mm Wide Pvc Water Bar For The Construction Joints In The Container ( Vertical Wall & Cone Wall ) .N ) Providing One Aluminium Portable Ladder Of Appropriate Length To Access First Landing ( 3.5 To 4.5M Above Gl ) From Ground.O ) Lighting Arrestor Consisting Of Providing And Fixing Of 2 Nos.Of Chemical Earthing And Connecting It To The Conical Cover Of Ss Ventilator With Two Separate Gi Strips Of 50Mmx3mm.P ) Ci / Di Puddle Collar Shall Be Fixed In The Bottom Dome / Slab For Connecting Inlet, Outlet, Overflow And Washout Pipe Of The Reservoir.Q ) Painting The Name Of The Scheme And Other Details On The Reservoir, And Any Other Work Related To Structure As Per The Directions Of Engineer-In- Charge, Technical Specification And Scope Of Work.R ) Inlet, Outlet, Overflow, Washout Pipes And Valves Are Not Included In This Work, Provision For The Same Shall Be Taken Separately. 64 Rates For Rcc Ohsr, Sbc 10 T / Sqm, Seismic Zone-Ii & Staging 18 M 65 100 Kl 66 150 Kl 67 Rates For Rcc Ohsr, Sbc 10 T / Sqm, Seismic Zone-Ii & Staging 20 M 68 100 Kl Each ( 100 X 2 Nos. ) 69 200 Kl Each ( 200 Kl X 3 Nos. ) 70 Providing And Fixing Double Flanged Isi Marked Di Class K-9 Pipes As Per Is:8329-2000 ( Amended Up To Date ) , As Vertical Pipes For Rcc Reservoirs Including Specials Required Such As Duck Foot Bend, Bend, Tee Etc. Providing Clamps At Every 3 Mtr, Jointing Materials Such As Nuts, Bolt, Rubber Packing, Hydraulic Testing Etc. Complete In All Respect Up To And From Valve Chamber As Per Direction Of Eic, Technical Specification And Scope Of Work. 71 100 Mm Dia 72 150 Mm Dia 73 200 Mm Dia 74 Construction Of Boundary Wall Of Brick / Stone Masonary As Per Enclosed Ga Drawing, Scope Of Work And Technical Specifications Complete Work In All Respect. Brief Details Of Boundary Wall Parameter Is As Below:1. Depth Of Foundation- 900 Mm.2. Pcc In M-10, Width -900 Mm And Thickness 100 Mm, 3. Section Of Foundation Above Pcc W-600 Mm, D-450Mm, W- 450Mm, D-450 Mm.4. Superstructure Work: Stone Masonary W-300, Height-1650 Mm, / Brick Work W-230 Mm, Height- 1650 Mm.5. Cement Mortar Pointing On Stone Masonary And Cement Mortar Plaster 20 Mm Thick On Brick Masonary In Cm 1:6.6. Expansion Joint Shall Be On Every 30 Mtr.7. On Top Of Wall There Shall Be Cc Coping 75 Mm Thick ( 1:2:4 ) Shall Be Provided.8. Pillar For Main Gate 350X350 Mm In Size Is Part Of Boundary Wall.9. Cement Paint Of Approved Colour In 3 Coat Shall Be Done. 75 Providing And Fixing Steel, Gate, Grating And Grills Made Of Angles, Tees, Square Bars, Flats Or Black Pipe With Hold Fast And Fitting Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide And Two Coat Of Enamal Paints. 76 Dismantling Of Cement Concrete Pavement For Pipe Lineand Chambers By Mechanical Means Using Pneumatic Tools, Cutting The Peripheral Edge By Cc Cutter, Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Up To A Lead Of 1000 Meters. Measurement For Dismantled Trench To Be Madeas Per Standard Trench Width Specified In Tender Document And No Extra Payment Shallbe Made For Trench Width More Than Specified, Re-Handling Of Material / Earth To Complete The Tasks As Per Technical Specification And Scope Of Work. 77 Providing And Laying In Position Cement Concrete M10 Grade Nominal Mix 1:4:8 ( 1 Cement : 4Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) In Base Course Complete Including All Material, Labour, Machinery, Lighting, Guarding For Road Restoration Work In Trenches Of Pipe Line And Chamber Work. Measurement For Cc Work To Be Madeas Per Standard Trench Width Specified In Tender Document And No Extra Payment Shall Be Made Be Made For Trench Width More Than Specified, Complete Work As Per Technical Specification And Scope Of Work. 78 Providing And Laying In Position Cement Concrete In Specified Grade Over Prepared Base Course Complete Including Finishing, Curing, All Material, Labour, Machinery, Lighting, Guarding For Road Restoration Work In Trenches Of Pipe Line And Chamber Work. Measurement For Cc Work To Be Madeas Per Standard Trench Width Specified In Tender Document And No Extra Payment Shall Be Made Be Made For Trench Width More Than Specified, Complete Work As Per Technical Specification And Scope Of Work. M20 Grade Nominal Mix1: 1.5: 3 ( 1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20Mm Nominal Size ) . 79 Dismantling Of Flexible Pavement For Pipe Lineand Chambers By Mechanical Means Using Pneumatic Tools, Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Up To A Lead Of 1000 Meters. Measurement For Dismantled Trench To Be Madeas Per Standard Trench Width Specified In Tender Document And No Extra Payment Shall Be Madefor Trench Width More Than Specified, Re-Handling Of Material / Earth To Complete The Tasks Per Technical Specification And Scope Of Work. 80 Bituminous Courses 81 Granular Courses 82 Provision For Restroration Of Bitumen Road After Laying & Jointing Pipe Line As Per Direction Of Engineer In Charge 83 Provision Forrestoration Of Wbm Road Cutting As Per Specifications. 84 Total Length Of Canal Corssing During Laying Of Pipe At Various Locations 85 Providing Service Connection As Per Technical Specification And Standard Drawing As Per Relevant Is Code ( Ammended Up To Date ) From All Kind Of Water Mains Up To Consumer Meter / Premises ( Complete Job ) . This Job Includes Digging Out Suitable Size Of Pits And Trench For Laying Service Line In All Kinds Of Soil Including Demolishing Of Cement Concrete, Wbm, Black Top Etc. Of All Thickness; Cutting Of Cc Road / Jhiri By Using A Concrete Cutter Machine; Depositing And Refilling Of Pit & Jhiri Watering And Ramming / Compacting In Layers And Disposal Of Surplus Excavated Soilas Directed With In A Lead Of 50 Meter; Providing And Fixing Of All Fitting Duty Approved In Accordance With Iso / Dtr 9080 As Per Specification For Portable Water Including Approved Make Of Ms / Pvc Clamp With Saddle Piece, Gunmetal Ferrule 4.0 Mm ( Isi Make ) , Valve ( Is: 778 ) And Specials With Mdpe Pipe Pe 80 Pn 12.5 As Per Iso 4424 Below Ground Level And P&F Gi Pipe 15 Mm Dia Class B ( Isi Mark ) Above Ground Level In The Premises For Fixing Tap ( Max. Length2.0 Mtr. ) , P&F A 15 Mm Bib Cork With Foam Flow Chrome Plated With Complete Brass Body Including Brass Handle Having Good Quality With Wt 300 To 325 Gm, Including Accessories With Flushing , Cleaning, Disinfecting And Testing Of Pipeline Complete Required For Making Of Service Connection Complete In All Respect Including Labour Charges. In Addition To The Ferrule, An Orrifice Of 4.0Mm Dia Should Also Be Provided In The Service Line At The Entry Pointy Of ConsumerS Property In Such A Way That It Should Be Accessible For Inspection To Vwsc, Phed And Any Other Authority Which Woyld Like To Inspect As And When Required. The Service Line Should Be Laid Atleast 45 Cm Below Ground Level, Except In Case Of Concrete / Bituminous Raods Where Minimum Depth Shall Be 20Cm. For Details Specifications Of Mdpe Pipes Please Refer Technical Specifications Of Bid Document. General Specifications Of Mdpe Pipes Shall Be As Under: The Raw Material Shall Be Virging Pe 80 Blue Compound And Comply With The Requirement Of Iso / Directive Of Testing Material : 9080 With Minimum Required Strength Of 8 Kg / Sq.Cm. ; The Raw Material Shall Be Food Grade Quality ; Ressure Rating Shall Be 12.5 Bar ; The Pipes Shall Bear Iso Marking 86 Removing& Re-Fixing Of Precast Concrete Interlocking Blocks By Manual, Stacking Of Serviciable & Non Serviceable Material Separately. Disposal Of Dismantled Material Lead Up To 50 Mtr. The C.C. Interlocking Paving Blocks Be Laid On Average 25 Mm Thick Bed Of Coarse Sand And The Joints To Be Filled With Fine Sand. Laying Procedure On Compacted Sub Base As Defined. Complete Job Is To Be Executed As Per The Directions Of Engineer In Charge. The Rates To Be Inclusive Of Fixing Of Minimum 70 Percent Reusable Precast Concrete Interlockingblock And Cost Of Required New Precast Concrete Interlocking Block Against Damaged, Including Alllead And Lift As Per Technical Specifications. ( Interlocking Blockmanufactured By Fully Computerized Automatic Stationery Hydraulic Vibro Pressed Machine & Full Computerized Automatic Batching Plant Of Class A-1 As Per Bs:6717-2001. Tensile Splitting Strength And Breaking Load As Per Bs: 6717-2001Colour: Grey Cement Natural Colour. Variation In Dimension : Less Than 1.6 Mm Variation In Thickness: Less Than 3.2 Mm ) 80 Mm Thick 87 Add Extra Over Item No 1.21 & 1.22 For Providing20 Mm Pe80 Pn 16 As Per Iso 4427 Mdpe Pipe Including Excavation, Providing, Laying & Jointing Of Service Line Above 5.00 Mtr. 88 Supply Laying And Pushing Of Ms Casing Pipe Of Specified Thickness Approved By Concerned Department Authority By Trenchless Method Adopting Any Suitable Technology Below Ground At Required Depth Under Running Traffic Condition As Per Highway / Railway Standard Including Carrying Out Survey Work At The Job Site For Determining Underground Cable Trenches Like Telephone, Cable, Water & Sanitary Lines And Resistivity Test For Finding The Soil Strata Using Necessary Equipments For Completion Of Works, Mobilizing Of Machineries And Specialized Crew At The Job Site Complete In All Respect, Including Excavation Of Driven Pit And Exit Pit ( Up To 3 Meter Depth ) With Proper Protection At These Sites With Shoring Sheets And Ismb. Providing Ms Cutting Edges For Front Shield And Constructing Thrust Bed At Designated Level. Necessary Dewatering And Providing Concrete Foundation At The Base Of The Driven Pit, Pvc / Rubber Saddle As Per The Requirement Of Highway / Railway Authority, Crane For Handing Of Pipe And Any Other Machinery, Tools, And Tackles Required, Construction Of Temporary Works As Per Design, Drawing And Method As Per Approved Byauthority Specification And The Direction Of The Engineer.Apply Corrosion, Resistant, Protection On Inside And Outside Of Casing Pipeas Per Technical Specification. 89 300 Mm Dia 8 Mm Thick Casing Pipe With Protective Coating. 90 Part B : Pump House & Cwr 91 Fabrication, Supply Of Flanged / Plain Ended Ms Pipe Made From Ms Sheet Strips Of Relevant Is Specification Of Approved Thickness By Welding, Lowering, Laying, Aligning, Fixing In Position At All Level / Depths In Trenches Complete Excluding Flanged Jointing Wherever ( Required ) Including All Material, Labour, Testing And Commissioning Along With Pipe Line As Per Technical Specifications And As Per Direction Of Engineer. 92 Ms Pipe Upto 600 Mm Dia ( With Minimum 5Mm Thickness Sheet 93 Ms Pipe Above 600Mm Dia ( With Minimum 6.3Mm Thickness Sheet ) 94 Providing, Lowering, Aligning, Fixing In Position In Pipe Line At Work Site, Di D / F Resilient Seated ( Soft Seated ) Sluice Valves ( Gate Valves ) , Vacuum Tight ( Bubble Tight ) , Straight And Pocket Less Body Passage Of Approved Make Of Following Class & Dia Complete Confirming To Bs-En-1171 / Awwa C-509 And Of Following Specifications: Body & Bonnet Of Ductile Cast Iron Of Grade Ggg40 / Ggg50 As Per Din 1693 Or Gr Sg-400 / 12 As Per Is 1865 Or Equivalent Grade As Per Is :3896-Part2-1985 And Subsequent Revisions, Wedge Of Same Material As Body & Shall Vulcanisedrubber Lined With Epdm ( Food Grade Quality ) And Seals Of Nbr Face To Face Dimensions As Per Bs 5163-89 / Is 14846 / 2000 ( Amended Up To Date ) / Din 3202 F4, Stem / Spindle Of Ss ( Aisi 316 Or Equivalent ) Electrostatic Epoxy Powder ( Ep-P ) / Fusion Bond Epoxy ( Non-Toxic- Suitable For Drinking Water ) Coated With Minimum Thickness Of 250 Microns Inside And Outside, Drilled As Per Is 1538. Nut-Bolt Confirming To Is:1363 And Is: 1367 ( Galvanised Steel ) Insersion Rubber Of Black Epdm 6Mm Thick. Suitablesupport Structure As Per Directions Of Eic, Sluice Valves Including All Jointing & Jointing Material, Labour, Testing And Commissioning Along With Pipe Line As Per Technical Specifications And As Per Direction Of Engineer-In-Charge. Note: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work.Manually Operated Resilient Seated Sluice Valves Of Class Pn 1.0 / 1.6 95 100 Mm Dia 96 125 Mm Dia 97 150Mm Dia 98 200 Mm Dia 99 250 Mm Dia 100 300 Mm Dia 101 450 Mm Dia 102 500 Mm Dia 103 600 Mm Dia 104 700 Mm Dia 105 900 Mm Dia 106 Providing, Lowering, Laying, Aligning, Fixing In Position And Jointing Ci Dismantling Joint ( Suitable For Sluice Valves Etc. ) As Per Is Specifications Complete Of The Following Sizes Including All Jointing Material, Cost Of All Labour, Testing And Commissioning As Per Technical Specifications And As Per Direction Of Engineer. 107 100 Mm Dia 108 125 Mm Dia 109 150 Mm Dia 110 200 Mm Dia 111 250 Mm Dia 112 300 Mm Dia 113 450 Mm Dia 114 500 Mm Dia 115 600 Mm Dia 116 900 Mm Dia 117 1000 Mm Dia 118 Cosntruction Of Valve Chamber For Sluice And Butterfly Valves As Per Approved Drawing And Specifications To The Satisfaction Of Engineer-In-Charge 119 Valve Chamber ( 80 Mm To 100 Mm Dia ) 120 Valve Chamber ( 500 To 600 Mm ) 121 Providing, Lowering, Aligning, Fixing In Position In Pipe Line, Di D / F Resilient Seated ( Soft Seated ) Short Body Pattern Type Double Eccentric Butterfly Valves Of Approved Make Of Following Class & Dia Complete Confirming To Bs En 593 / Bs 5155 / Is 13095 / 1991 Amendedup To Date And Of Following Specifications: Body, Disc And End Cover Of Ductile Cast Iron Of Grade Ggg40 / Ggg50 As Per Din 1693 Or Gr Sg-400 / 12 As Per Is 1865 Or Equivalent Grade As Per Is :3896-Part2-1985 And Subsequent Revisions, Face To Face Dimensions As Per Din 3202 F4 / Is 13095Drilled As Per Is:1538. Electrostatic Epoxy Powder ( Ep-P ) / Fusion Bonded Epoxy ( Non-Toxic & Suitable For Drinking Water ) Coated With Minimum Thickness Of 250 Micron Applied On Both Body And Disc Inside And Outside. Disc Seal Ring Of Epdm / Neoprene ( Food Grade Quality ) And Disc Seal Retaining Ring Of Ss / Cs. Shaft Of Ss- Aisi- 304 / 316 & Shaft Bearings-Bronze / Ptet Or Teflon With Epdm / Nbr O Ring Seal, Nut-Bolt Confirming To Is:1363 And Is: 1367 ( Galvanised Steel ) Insersion Rubber Of Black Epdm 6Mm Thick. Suitablesupport Structure As Per Directions Of Eic Including Jointing & Jointing Material, Labour, Testing And Commissioning Along With Pipeline As Per Technical Specification & As Per Direction Of Engineer-In-Charge.Class Pn 1.6, Motorised Operatednote: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work. 122 100 Mm Dia 123 150 Mm Dia 124 250 Mm Dia 125 450 Mm Dia 126 500 Mm Dia 127 600 Mm Dia 128 Providing, Lowering, Laying, Aligning, Fixing In Position And Jointing In Pipe Line, Di Dual Plate Check Valves Of Pn 1.6 Rating Of Following Dia ( Including Jointing And Jointing Material ) , Including All Material, Labour, Testing And Commissioning As Per Technical Specifications And As Per Direction Of Engineer. 129 100 Mm Dia 130 125 Mm Dia 131 150 Mm Dia 132 250 Mm Dia 133 450 Mm Dia 134 500 Mm Dia 135 Providing, Lowering, Laying, Aligning, Fixing In Position And Jointing In Pipe Line, Di Dual Plate Check Valves Of Pn 1.0 Rating Of Following Dia ( Including Jointing And Jointing Material ) , Including All Material, Labour, Testing And Commissioning As Per Technical Specificationsand As Per Direction Of Engineer. 136 600 Mm Dia 137 Providing And Fixingat Site With Necessary Packing, Horizontal Centrifugal Split Casting Pumps With 4 Poleinduction Motor As Per Is 12615: 2011 Or Amended Up To Date , Ci Casing And Casing Ring, Ss 316 Impeller, Ss 410 Shaft And Shaft Sleeve, Coupling Guard, Common Base Plate, Foundation Bolts, Cement Concrete Foundation Etc. Complete With All Respect As Per The Specification And Scope Of Work And Direction Of Engineer In Charge Of Following Range Of Duty Conditions.Note: Duty Condition Of Required Pump Shall Also Be Mentioned In Boq 138 295.08 Lps, 59 M Head 139 295.08 Lps, 80 M Head 140 274.12 Lps, 61 M Head 141 Providing And Fixingat Site With Necessary Packing, Horizontal Centrifugal Split Casting Pumps With 4 Poleinduction Motor As Per Is 12615: 2011 Or Amended Up To Date , Ci Casing And Casing Ring, Ss 316 Impeller, Ss 410 Shaft And Shaft Sleeve, Coupling Guard, Common Base Plate, Foundation Bolts, Cement Concrete Foundation Etc. Complete With All Respect As Per The Specification And Scope Of Work And Direction Of Engineer In Charge Of Following Range Of Duty Conditions.Note: Duty Condition Of Required Pump Shall Also Be Mentioned In Boq. 142 25.79 Lps, 70 M Head 143 26.83 Lps, 75 M Head 144 15.14 Lps, 79 M Head 145 Providing, Installation, Testing And Commissioning Of Centrifugal Monoblock Pump Set Conforming To Is 9079 Operating At Sync. Speed 2900 Rpm With Requisite Moc Impeller, Priming Funnel, Cock, Suitable Flanges At Suction And Delivery Side. Pump Shall Have Common Shaft For Pump And Motor. Motor Shall Be Suitable For Working On 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor Shall Be Tefc Type And Pump Set Shall Be Suitable For Working At Various Discharge And Head Requirements As Per Scope Of Work. Pump Shall Be Erected Onc.C. Foundation / Cross Channels / Rsj Frame Block With Suitable Foundation Bolts Grouted In C.C. Foundation Block Etc. Complete In All Respect As Perspecification, Scope Of Work And Direction Of Engineer In Charge Of Following Power Rating, Suitable For Prescribed Duty Conditions Mentioned In Td. 146 19.31 Lps, 41M Head 147 20.62 Lps, 54 M Head 148 9.93 Lps, 78 M Head 149 26.15 Lps, 44 M Head 150 18.46 Lps, 62 M Head 151 9.39 Lps, 73 M Head 152 Supplying, Erecting, Testing & Commissioning Of Electrically Operated Travelling Crane ( Eot ) .Main Girder & End Carriage Fabricated From Rollled Steel Section, Gear Box For All Motion, Electro Magnetic Friction Disc Type Brakes, All Safety Limit Switches, Lt Wheels En 9, Double Flanged 4No, With Sq. Cage Motor Of Adequate Rating ( Kw ) , Duly Painted Mechanical Cleaning And One Coat Of Primer And Two Coat Of Synthetic Paint And As Per The Direction Of The Engineer. 153 Span 7 M 6 Mtr. Lift 154 Providing, Lowering, Aligning, Fixing In Position In Pipe Line, Ci D / F Sluice Valves Of Approved Make Of Following Pressure Rating & Dia Complete, Confirming To Is:14846 ( Amended Up To Date ) And Of Following Specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand Wheel Of Grey Cast Iron Of Is:210 / Fg200 Stem - Ss 304 , Body Seat Ring, Wedge Facing Ring & Bushes - Ltb2 / Ss , Face To Face Dimensions As Per Is 14846 / 2000 ( Amended Up To Date ) , All Exposed Machined Ferrous Surfaces Shall Be Painted With One Coat Of Aluminium Red Oxide Primer Conforming To Is:5660 And Two Coats Of Black Japan Paint Conforming Totype B Of Is 341Or Paint Conforming To Is9862 Or Is2932 ( Non-Toxicsuitable For Drinking Water ) Applied Inside And Outside, Flanges Drilled As Per Is 1538.Nut-Bolt Confirming To Is:1363 And Is: 1367 / Cs / Galvanised Steel.Insersion Rubber Of Black Epdm 6Mm Thick . Suitable Support Structure As Per Directions Of Eic. Sluice Valves Including All Jointing & Jointing Material, Labour, Testing And Commissioning Along With Pipe Line As Per Technical Specifications And As Per Direction Of Engineer-Incharge.Note: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work.Manually Operated Ci Sluice Valve Of Class Pn-1.0 155 100 Mm Dia 156 600 Mm Dia 157 Providing And Fixing Double Flanged Isi Marked Di Class K-9 Pipes As Per Is:8329-2000 ( Amended Up To Date ) , As Vertical Pipes For Rcc Reservoirs Including Specials Required Such As Duck Foot Bend, Bend, Tee Etc. Providing Clamps At Every 3 Mtr, Jointing Materials Such As Nuts, Bolt, Rubber Packing, Hydraulic Testing Etc. Complete In All Respect Up To And From Valve Chamber As Per Direction Of Eic, Technical Specification And Scope Of Work. 158 100 Mm Dia 159 600 Mm Dia 160 700 Mm Dia 161 Design & Construction Of Clear Water Reservoirs Of Required Capacity At Following Places, Including Its Piping, Fittings, Etc Complete In All Respect As Per The Scope Of Work & Specifications Given In The Tender Document At The Following Places & Sizes . 162 Tps / Cps Bhaleri 163 Design, Manufacturing And Supply Of Batch Type Electro Chlorinator Of Capacity As Per Requirement Of Site 164 Part : C Repair Works 165 Repair Of Valves From Karamsana To Bhaleri 166 Providing, Lowering, Aligning, Fixing In Position And Jointing In Pipe Line, Di Body Flanged End Tamper Proofkinetic Air Valve Of Approved Makes Of Following Pressure Rating And Dia And As Per Following Specifications: Governing Standard - Awwa C512 / Is:14845:2000 ( Amended Up To Date ) Body, High Pressure Cover , Low Pressure Cover, Cowl Andjoint Support Ring - Ductile Cast Iron Of Grade Ggg40 / Ggg50 As Per Din 1693 Or Gr Sg-400 / 12 As Per Is 1865, Float- Lp Ball & Hp Ball : Aisi 304 Stainless Steel, Seat Ring & Gasket - Epdm / Nbr , Hp Orifice & Hp Orifice Plug : Bronze / Ss , Bush: Bronze , Flanges As Per Is / Bs, Drilled As Per Is:1538. Electrostatic Epoxy Powder ( Ep-P ) / Fusion Bonded Epoxy ( Non-Toxic & Suitable For Drinking Water ) Coated With Minimum Thickness Of 250 Micron Applied On Body & Coverinside And Outside .Fasteners - Cs / Galvanised Steel, Outlet Of Big Orifice Will Have A Screen To Prevent Tamper Of Float, With Di Metal Seated D / F Non Rising Stem. Sluice Valves As Per ( Is: 14846 Amendedupto Date ) Pn 1.6 Ratings. Valves Including All Material, Labour, Testing And Commissioning As Per Technical Specifications And As Per Direction Of Engineer In Charge. Note: Rates Are Exclusive Of Connecting Tee, Pipe Piece And Earth Work. ( Class Pn 1.6 ) 167 150 Mm Dia 168 200 Mm Dia 169 Providing, Lowering, Aligning, Fixing In Position In Pipe Line At Work Site, Di D / F Resilient Seated ( Soft Seated ) Sluice Valves ( Gate Valves ) , Vacuum Tight ( Bubble Tight ) , Straight And Pocket Less Body Passage Of Approved Make Of Following Class & Dia Complete Confirming To Bs-En-1171 / Awwa C-509 And Of Following Specifications: Body & Bonnet Of Ductile Cast Iron Of Grade Ggg40 / Ggg50 As Per Din 1693 Or Gr Sg-400 / 12 As Per Is 1865 Or Equivalent Grade As Per Is :3896-Part2-1985 And Subsequent Revisions, Wedge Of Same Material As Body & Shall Vulcanisedrubber Lined With Epdm ( Food Grade Quality ) And Seals Of Nbr Face To Face Dimensions As Per Bs 5163-89 / Is 14846 / 2000 ( Amended Up To Date ) / Din 3202 F4, Stem / Spindle Of Ss ( Aisi 316 Or Equivalent ) Electrostatic Epoxy Powder ( Ep-P ) / Fusion Bond Epoxy ( Non-Toxic- Suitable For Drinking Water ) Coated With Minimum Thickness Of 250 Microns Inside And Outside, Drilled As Per Is 1538. Nut-Bolt Confirming To Is:1363 And Is: 1367 ( Galvanised Steel ) Insersion Rubber Of Black Epdm 6Mm Thick. Suitablesupport Structure As Per Directions Of Eic, Sluice Valves Including All Jointing & Jointing Material, Labour, Testing And Commissioning Along With Pipe Line As Per Technical Specifications And As Per Direction Of Engineer-In-Charge. Note: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work. 170 Manually Operated Resilient Seated Sluice Valves Of Class Pn 1.0 / 1.6Sectional Valves 171 150 Mm Dia 172 200 Mm Dia 173 900 Mm Dia With Gear 174 Providing, Lowering, Aligning, Fixing In Position And Jointing Ms Dismantling Joint Fabricated Steel ( Suitable For Sluice Valves Etc. ) As Per Is Specificationscompleteofthefollowingsizesincludingall Jointing Material, Costofalllabour, Testingandcommissioningand As Per Technical Specifications And Direction Of Engineer In-Charge. Class Pn 1.0 / 1.6 175 900 Mm Dia 176 Construction Of Valve Chamber As Per Approved Drawing And Specification Of Engineer In Charge 177 Type G Size Up To 800Mm To 900 Mm 178 Major Repair Of Pmc Office Building, Residential Buildings At Pmc Campus, All Work Civil, Electric, Water Supply, Road, Drainage Cleaning, Horticulture, Etc. Complete 179 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 180 Random Rubble Stone Masonary For Foundation And Plinth In Cement Sand Mortar Above 30 Cm. Thick Wall In : 181 Cement Mortar 1:6 ( 1-Cement:6-Sand ) . 182 Brick Work With F.P.S. Bricks Of Class Designation 75 Infoundation And Plinth In: 183 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 184 Repair To Brick Masonary In Cement Sand Mortar With Taking Out Of Deceayed From Wall And Replaceing With New Briks.Cement Sand Mortar 1:6. With New Brick. 185 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead : With Cement Mortar 1 :4 ( 1 Cement : 4 Fine Sand ) 186 Repair To Stone Masonary In Cement Sand Mortar 1:6 With Old And New Stone. 187 Cutting Jhiri Above 75Mmx75mm And Below 150X150 Mm Etc. And Making Good. 188 Scraping Old Surface And Redoing Lime Loi Or Sandla. 189 Renewing Glass Panes, With Puty And Nails Wherever Necessary: 190 5.5 Mm Thick Plain Glass Panes. 191 Renewing Glass Panes With Wooden Fillets Wherever Necessary: 192 5.5 Mm Thick Plain Glass Panes. 193 Providing And Fixing 16 Mm M.S. Fan Clamps Of Standard Shape And Size In R.C.C. Slab / Stone Slab Roofing Including Cutting Chase And Making Good And Painting Exposed Portion Of The Clamps Complete: 194 In Existing Roof. 195 Guniting Damaged R.C.C. Slab, Beams And Columns For Strengthening With Cement Sand Mortar 1:2 ( 1-Cement:2-Sand ) Including Preparing The Surface, Making V Shaped Joints, Cleaning The Reinforcement Bars With Jet Of Potable Water And Drying With Compressed Air, Including Cost Of Centering And Shuttering And Finishing To Match The Existing Surface Etc. Complete, Including Provided M.S. Welded Mesh To Gauge 25 Mm X 25 Mm Framing With Average Thickness Of 25 Mm. 196 Chopping Loose And Cracked Concrete To Required Depth, Cleaning The Exposed Surface Of Steel And Concrete With Wire Brush And Sand Blasting, Clening With A Jet Of Water / Air As Necessary And Getting It Dried With Compressed Air Including All Scaffolding: 197 Depth 50 Mm To 75 Mm. 198 Depth 75 Mm To 100 Mm. 199 Repairofdoor, Windowshuttersincludingcostofmaterialandlabourforchangeofdamaged : 200 Style / Rail Of Teak Wood 30Mm Thick / Aluminium Section 201 4Wide 202 6 Wide 203 Panel By 204 Shuttering Ply - 9Mm Thick ( Commercial ) 205 Wire Gauge 14 Mesh X 24 Gauge 206 Plain Glass Panes 4Mm Thick 207 Aldrop Of Mild Steel 208 12 Long X12mm Dia 209 8 Long X 10Mm Dia 210 Stopper Of Aluminium With 211 Single Rubber Gutka 212 Double Rubber Gutka 213 Door Springs Of Mild Steel 214 Steel Hinges 215 For Wooden Chowkhat 3 Size. 216 For Wooden Chowkhat 4 Size 217 For Stone Chowkhat , 4Size 218 Mild Steel Tower Bolt 6 Long 219 Steel Locking Bolt 220 Steel Handle 6 Size 221 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Level 222 M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 223 M10 Grade Nominal Mix 1: 3: 6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stoneaggregate 20Mm Nominal Size ) . 224 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggre -Gate 20 Mm Nominal Size ) Over 75Mm Bed Of Dry Brick Ballast 40Mm Nominal Size Well Rammed And Consolidated And Grouted With Fine Sand Including Finishing The Top Smooth. 225 Providing And Laying In Position Specified Grade Ofcement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Making Good The Joints And Cost Of Plastizers ( If Required ) Excluding The Cost Of Centering, Shuttering And Reinforcementfor Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. M20 Grade Nominal Mix / Design Mix 226 Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Propsand Removal Of Formwork For Upto Floor Five Level For : 227 Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands , Coping, Bed Plates, Anchor Blocks, Sills, Chhajjas Lintel, Beam Etc. 228 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding ( Including Cost Of Binding Wire ) All Complete Up To Floor Five Level. 229 Hot Rolled Deformed Bars ( Is : 1139 ) . 230 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished: 231 20 Mm Thick. 232 Providing And Fixing Expanded Metal Mesh Of Size 20X60 Mm And Strands 3.5 Mm Vide 1.6 Mm Thick Weighing 3.64 Kg. Per Sqm. For Encasing Ofrolledsteel Sections In Beams, Columns And Grillages Excluding Cost Of Hangers. 233 Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In : 234 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 235 Half Brick Masonry In Superstructure , Above Plinth Level Upto Floor Fivelevelusing F.P.S. Bricks Of Designation 75 236 Cement Mortar 1:4 ( 1-Cement:4-Coarse Sand ) . 237 Brick Work In Partition In Super Structure Upto Five Storey 7Cm. Thick ( Brick On Edges ) Using F.P.S. Bricksof Class Designation 75 In : 238 Cement Mortar 1:4 ( 1-Cement:4-Coarse Sand ) . 239 Supplying And Fixing Machine Cut And Polished Stone Shelves, Tands And Sills In Cm 1:3 With Machine Cut Edges: 240 Sand Or Other Approved Stone 25 Mm Thick. 241 Sand Or Other Approved Stone 35 Mm Thick. 242 Sand Or Other Approved Stone 50 Mm Thick. 243 Kota Stone 25 To 30 Mm Thick. 244 Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills, Counters. Floors Etc. Laid On 12Mm ( Av. ) Thick Base Of Cement Mortar 1:3 Jointing With White Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With Pigment To Match The Shade Of The Marble Slab Complete Including Grinding, Rubbing And Polishing Of: 245 Jhunjhunu / Jalore ( Red / Choclate Colour ) 246 Above 3601 Cm2 Slabs 247 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption’S Less Than 0.08% And Conforming To Is : 15622 Of Approved Make In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 248 Size Of Tile 60X60 Cm 249 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacture ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer In Charge In Skiriting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm Including Pointing In White Mixed With Pigment Of Matching Shade Complete. 250 Category - I : Kajariya, Jhonson, Orient, Somani Make Etc. 251 Providing & Fixing In Cement Sand Mortar 1:4 Single Paitam ( Rebated ) Stone Doors Windows And Ventilator Frames Of Approved Quarry : 252 Size 100X75mm. 253 Size 125X100mm. 254 Providing And Fixing In Cm 1:4 Double Paitam ( Rebated ) Stone Door Window And Ventilator Frames Of Approved Quarry : 255 Size 125 X 100Mm. 256 Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal, Dehydreresin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure ‘A’ 257 30 Mm Thick Shutter 258 Commercial Veneer Both Side 259 Decorative Teakveneer One Side 260 Providing And Fixing Fully Paneled Double Leaf Shutter For Doors As Per Approved Design And Drawing With Approved Ordinary C.P. / Oxidized Steel Fittings As Per Annexure – A’ And Width Of Styles & Top Rails Of 100Mm And Lock Rails Width Of 150Mm And Bottom Rails Of 200Mm Width Including Teak Wood Beading Of Size 19Mmx12mm On Both Faces Complete : 261 30 Mm Thick Ghana Teak Wood Grade - I 262 Wire Gauge 24 Gauge 14 Mesh Of Is Designation 85 Gauge Wires Of Dia 0.56 Mm Panels 263 Demolishing Cement Concrete Including Disposal Of Material Within 50 Meter Lead : 264 1:3:6 Or Richer Mix. 265 Demolishing Of R.C.C. Work Including Stacking Of Steel Bars And Disposal Of Unserviceab Le Material Within 50 Meters Lead. 266 Demolishingbrickwork Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 267 In Cement Mortar. 268 Structural Steel Work In Single Section Fixed With Or Without Connecting Plate Including Cutting, Hoisting ( Height Upto 10 M ) , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 269 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded With 15X3 Mm Lugs 10 Cm. Long Embedded In Cement Concrete Blocks 15X10x10 Cm. Of 1:2:4 ( 1-Cement:2-Coarse Sand:4-Graded Stone Aggregate 20 Mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 270 Providing And Fixing Steel Gate Grating And Grills Made Of Angles, Tees, Square Bars Or Other Flats Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide. 271 Providing & Fixing Ms Sheet Single Leaf Door Shutters In Angle Iron Frame 35X35x5 Mm Suitablly Diagonally Braced With 25X3mm Flat Ironabove And Below Lock Rail Of Size 50X5 Mm Beading Extra Includingall Fittings, As Per Direction Of Engg. Incharge But Excluding Coes Of Chokhats Including Two Coats Of Anti Corrastie Red Oxide Primer Panit. 272 Ms Sheet 18 Swg 273 Providing & Fixing Steel Glazed Doors, Windows And Ventilators With Shutters Of Standred Rolled Steel Section Joint Mitred And Welded With Steel 13X3mm Lugs 10 Cm. Long Embedded In Cement Concrete Blocks 15X10x10 Cm. Of 1:2:4 ( 1-Cement:2-Coarse Sand:4-Graded Stone Aggregate 20 Mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required, Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Copper Glazing Clips And Special Metal-Sash Putty Of Approved Make, Or Metal Beading With Screws Complete Including Priming Coat Of Approved Steel Primer, Excluding The Cost Of Metal Beading And Other Fittings Except Necessary Hinges Of Pivots Steel Handles And Peg Stay Etc. As Required. 274 Patially Fixed And Partially Openable Fixed Area Not Exceed 33% 275 Supplying And Fixing Fixed Wire Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3mm With Suitable Screw At Not Exceeding 150 Mm Distance. 276 14 Mesh X 24 Gauge 277 Providing And Fixing 20 Mm Thick Precast Terrazo Tiles Of Approved Make, With Marble Chips Of Size Upto 6Mm Laid Over Roof With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Cutting , Grinding Rubbing With Machinecomplete On 20 Mm Thick Bed Of Cement Sand Mortar 1 : 4. 278 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches By Sandal / Loi. ( Only For Colour Changing Only ) . 279 Distempering With Dry Distemper Of Approved Brand And Shade ( Two Or More Coats ) And Of Required Shade On New Work, Over And Including, Priming Coat Of Whiting To Give An Even Shade Including All Scaffolding. 280 Providing & Fixing 12 Mm Thick Tegular Edge Glass Fibre Reinforced Gypsum False Ceiling Tiles Of Size 595 X 595 Mm In True Horizontal Level Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanised Steel Sections ( Galvanized @ 170 Gsm / Sqm. ) Consisting Of Main “T” Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38mm Made From 0.30Mm Thick ( Minimum ) Sheet Spaced At 1200Mm Center To Center And Cross “T” Of Size 24X25mm Made Of 0.30Mm Thick ( Minimum ) Sheet, 1200Mm Long Spaced Between Main “T” At 600Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross “T” Of Length 600Mm And Size 24X25mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of The 1200X600mm Panel To Form Grids Of 600X600mm And Wall Angle Of Size 21X21x0.30 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Wherever, Required, Cutting / Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main “T” Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Fixed To Ceiling With 6 Mm Dia And 50Mm Long Dash Fasteners, 4Mm Gi Adjustable Rods With Galvanised Level Clips Spaced At 1200Mm Center To Center Along Main T, Bottom Exposed Width Of 24Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete At All Heights As Per Specifications Drawings And As Directed By Engineer-In-Charge. 281 Finishing Wall With Water Proofing Cement Paint Of Approved Brand And Manufacture And Or Required Shade To Give An Even Shade Including All Scaffolding: 282 New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) . 283 Old Work ( One Or More Coats ) . 284 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Togive An Even Shade : 285 Two Or More Coats On New Work. 286 One Or More Coats On Old Work. 287 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thickbase Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Completewith Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) 288 For Area Of Each Slab Up To 900 Sq. Cm 289 For Area Of Each Slab Up To 901 To 2000Sq. Cm 25 Mm Thick Slab. 290 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Level 291 M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 292 Add 10 % For Water Supply And Sainatry Works 293 Add 10 % For Electric Works 294 Horticulture 295 Cutting Of Trees, Including Cutting Of Trunks, Branches And Removal Of Stumps, Roots, Stacking Of Serviceable Material With All Lifts And Up To A Lead Of 1000 Mtrs And Earth Filling In The Depression / Pit To Required Compaction As Per Mort&H Specification Clause 201. ( Measurment Of Girth To Be Done At Height Of 1 M Above Ground Level ) 296 Girth From 300 Mm To 600 Mm 297 Clearing Grass And Removal Of Rubbish ( Maximum 150Mm ) By Manual Means And Disposal At A Lead Of 50 Metres As Per Mort&H Specification Clause 201. 298 Supply Of Dry Manure Including Loading Unloading, Transportation & Stacking At Site. 299 From Yard Manure ( Organic ) 300 Compost 301 Goat Dungmanure 302 Supply & Stacking Good Earth At Site Complete Including Loading Unloading & Transporation Etc. 303 Supply Of Insecticides & Pesticides At Store In Dust / Liquid Form Complete 304 Methly Prathion 2% 305 Supply Of Different Varities Of Tree / Shrubs / Climbers According To Height And Age Of The Plant At Site Including Loading / Unloading & Transportation Etc. Complete: 306 Different Flowing Plants 900 Mm To 1500 Mm 307 Different Varrities Of Shrubs 600 Mm To 900 Mm 308 Different Varrities Of Climbers 900 Mm To 1500 Mm 309 Laying Of Lawns Including Ploughing Levelling Breaking Of Clods Manuring & Removal Of Stones Etc. ( Cost Of Manure Of Extra Good Earth To Be Paid Seperatley ) Maintenance Of Lawns For 30 Days Of More Till The Grass Forms A Thick Lawns Free From Weeds & Fit For Mowing In The Duration Of Planting If Lawn Die Some Where The Contractor Will Replant It At His Own Cost. 310 In Rows 7.5 Cms. Apart In Either Direction 311 Renovating Lawns Including Weeding Cheeling The Grass Forking The Ground Top Dressing With Manure. Mixing The Same With Forked Soil Watering Maintaing The Lawns For 30 Days Or More Till Grass Forms A Thick Lawns Free From Weeds & Fit For Mowing & Disposal Of Rubbish As Directed. 312 Road And Drainage Work 313 Providing, Laying, Spreading And Compacting Of Granular Sub-Base By Providing Close Graded Material ( Table 400-1 ) , Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Vibratory Roller To Achieve The Desired Density, Complete As Per Mort&H Specification Clause - 401 Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. 314 Grading - Ii Material 315 Providing Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes As Per Table 400-7 To Water Bound Macadam Specification Including Spreading In Uniform Thickness; Hand Packing, Rolling With Power Roller 8-10 Tonnes, In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening ( Table 400-8 ) Binding Materials To Fill Up The Interstices Of Coarse Aggregates, Watering ( With Water Browser ) And Compacting To Required Density, Making Necessary Earthen Bund To Protect Edges As Per Clause 404 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion Complete 316 Crusher Broken -Grade-Ii ( 63-45Mm ) 317 Providing And Applying Primer Coat Over Prepared Surface Of Granular Base With Bitumen Emulsion As Per Is : 8887 And Approved Quality @ 0.6 Kg / Sqm With The Help Of Spray Set Fitted On Bitumen Container ( Boiler ) After Cleaning The Surface Including Removing Of Binding Material And Other Foreign Matter With Wire Brushes And Small Picks, Sweeping With Brooms Or Soft Brushes And Finally Dusting With Old Gunny Bags And Compressed Air To Receive Bituminous Treatment Complete As Per Clause 502 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. 318 Providing And Laying Open Graded Premix Carpet 20Mm Thick ( Compacted ) , On Prepared Surface In A Single Course As Wearing Course, Composed Of Specified Graded Crushed Stone Aggregate As Per Table 500-23, Premixed With Bituminous Binder @ 14.60 Kg / 10Sqm ( Including Cost Of Anti-Stripping Compound Wherever Required ) , Including Loading Of Material With F.E. Loader, Hot Mixing Of Stone Aggregate And Bitumen In Computerised Hot Mix Plant, Transporting The Mixed Material By Tippers To Paver And Laying With Paver Finisher Fitted With Electronic Sensor Control To The Required Level And Grade, Compacting Smooth Wheeled Roller 8-10 Tonne Capacity And Finishing To Required Level To Achieve The Desired Density As Per Clause 511 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion But Excluding Cost Of Tack Coat / Seal Coat. 319 With Bitumen Vg-Grade 30 320 Providing And Applying Premixed Seal Coat Type B Comprising Of Thin Application Of Fine Aggregate 0.06 Cum / 10 Sqm Premix With Bitumen Binder @ 6.8 Kg / 10 Sqm ( Including Cost Of Anti-Stripping Compound Wherever Required ) Laying With Paver Finisher With Electronic Sensor Control And Rolling With Power Roller 8-10 Tonne Complete As Per Clause 513 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. 321 With Bitumen Vg-Grade 30 322 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 323 Random Rubble Stone Masonary For Foundation And Plinth In Cement Sand Mortar Above 30 Cm. Thick Wall In : 324 Cement Mortar 1:6 ( 1-Cement:6-Sand ) . 325 Brick Work With F.P.S. Bricks Of Class Designation 75 Infoundation And Plinth In: 326 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 327 Providing And Laying Reinforced Cement Concrete Pipe Np4 / Prestrssed Concrete Pipe For Culverts Including Jointing Ends And Fixing Collar With Cement Mortar 1:2 Complete As Per Clause 1000 & 2900 Of Mort&H Specification Including All Material, Labour Form Work, Machinery. 328 200 Mm Internal Diameter 329 Providing And Fixing Of Reinforced Ferro-Cement Drain Covers Designed For A Class Loading Duly Marked On Cover With Adequate Steel Reinforcement Having Thickness 75Mm To 150Mm Anti Corrosive Bitumen Painted M.S. Plate , Rim And M.S. Lifting Hooks, Admixtures Like Plasticizer, Bond Improving Compound, Shrinkage, Resistance Compound, Abrasion Resistant Complete As Per Approved Design Etc 330 Standard Size 600X800mm ( 75Mm Thick ) For Span 300 To 450Mm 331 Providing And Laying Lean Cement Concrete 1:4:8 In Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg / Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing Complete As Per Clause 601, 112 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion 332 Providing And Laying Un-Reinforced, Plain Cement Concrete Mix With Concrete Mixer & Vibrator Pavement Over A Prepared Sub Base With 43 Grade Cement , Coarse And Fine Aggregate Conforming To Is: 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed As Per Approved Mix Design, Laid, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints Etc Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. 333 Pcc M-30 334 Campus Lighting 335 Supply And Erection Of Octagonal Pole Of Following Length And Dimension As Per Table-3 With Base Plate On The Cement Concrete Foundation Of M-15 / M-20 Grade ( 1:1.5:3 ) With The Help Of Anchor Bolts Of Grade 6.8 ( Is 1367 P Iii ) . The Pole Shall Be Made Of S-355Jo Grade Steel Sheet , Folded Lengthwise To Obtained Octagonal Shape, Having Single Longitudinal Seam Weld And Hot Dipped Galvanised Internally & Externally In Accordance With Is 2629. The Pole Shall Have A Weatherproof Flush Door And Locking Arrangements. The Complete Work Shall Be Supervised And Certified By The Manufacturers For Satisfactory Supply, Erection, Testing And Commissioning. 336 7 Mtr 337 Supply, Erection And Fixing Of Hot Dipped Galvanised Overhang ( 60 X 3.25 Mm ) With Cap ( 250 X 137.9 X 4.05 Mm ) Over The Existing Poles 338 Single Arm Overhang 339 P & F Of Ip 65 / 67 Protected Led Flood Light System With Aluminium Housing, 3 X 1W, 220V, 50Hz Led Lamps With Dynamic Color Changing Capability Available In Quick Connecting Cable Coupled With Various Mounting Accessories. Ability To Create 16.7 Million Uniform, Smooth And Brilliant Colors Without Revealing Any Lamp Image. Available In 5 Colors – Amber, Green, Blue, Red And White. 340 Providing & Laying Xlpe Insulated / P.V.C. Sheathed Cable Of 1.1 Kv Grade With Aluminium Conductor Armoured Of Is:7098-I / 1554-1 Approved Makein Ground As Per Is:1255 Including Excavation Of 30Cmx75cm Size Trench, 25 Cm Thick Underlayer Ofsand, Second Class Bricks Covering, Refilling Earth, Compaction Of Earth, Making Necessary Connection, Testing Etc. As Required Of Size 341 10.0 Sq.Mm2 Cor 342 Add 5% Over Head 343 Repair Of Pump House Building At Churu, Bhaleri Like Repair Of Plaster, Floor, Roof, Doors, Windows, Colour Washing, Painting Etc. 344 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 345 Random Rubble Stone Masonary For Foundation And Plinth In Cement Sand Mortar Above 30 Cm. Thick Wall In : 346 Cement Mortar 1:6 ( 1-Cement:6-Sand ) . 347 Brick Work With F.P.S. Bricks Of Class Designation 75 Infoundation And Plinth In: 348 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 349 Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In : 350 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 351 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead : With Cement Mortar 1 :4 ( 1 Cement : 4 Fine Sand ) 352 Scraping Old Surface And Redoing Lime Loi Or Sandla. 353 Patch Repair To Cement Concrete Floor Including Digging Out Old Floor In Regular Shape And Removal Of Rubbish Curing Etc. Complete In All Respects. 354 Renewing Glass Panes, With Puty And Nails Wherever Necessary: 355 5.5 Mm Thick Plain Glass Panes. 356 Providing And Fixing 16 Mm M.S. Fan Clamps Of Standard Shape And Size In R.C.C. Slab / Stone Slab Roofing Including Cutting Chase And Making Good And Painting Exposed Portion Of The Clamps Complete: 357 In Existing Roof. 358 Chopping Loose And Cracked Concrete To Required Depth, Cleaning The Exposed Surface Of Steel And Concrete With Wire Brush And Sand Blasting, Clening With A Jet Of Water / Air As Necessary And Getting It Dried With Compressed Air Including All Scaffolding: 359 Depth 50 Mm To 75 Mm. 360 Depth 75 Mm To 100 Mm. 361 Repairofdoor, Windowshuttersincludingcostofmaterialandlabourforchangeofdamaged : 362 Style / Rail Of Teak Wood 30Mm Thick / Aluminium Section 363 4Wide 364 6 Wide 365 Panel By 366 Shuttering Ply - 9Mm Thick ( Commercial ) 367 Wire Gauge 14 Mesh X 24 Gauge 368 Plain Glass Panes 4Mm Thick 369 Aldrop Of Mild Steel 370 12 Long X12mm Dia 371 8 Long X 10Mm Dia 372 Stopper Of Aluminium With 373 Single Rubber Gutka 374 Double Rubber Gutka 375 Door Springs Of Mild Steel 376 Steel Hinges 377 For Wooden Chowkhat 3 Size. 378 For Wooden Chowkhat 4 Size 379 For Stone Chowkhat , 4Size 380 Mild Steel Tower Bolt 6 Long 381 Steel Locking Bolt 382 Steel Handle 6 Size 383 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Level 384 M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 385 M10 Grade Nominal Mix 1: 3: 6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stoneaggregate 20Mm Nominal Size ) . 386 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggre -Gate 20 Mm Nominal Size ) Over 75Mm Bed Of Dry Brick Ballast 40Mm Nominal Size Well Rammed And Consolidated And Grouted With Fine Sand Including Finishing The Top Smooth. 387 Providing And Laying In Position Specified Grade Ofcement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Making Good The Joints And Cost Of Plastizers ( If Required ) Excluding The Cost Of Centering, Shuttering And Reinforcementfor Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. M20 Grade Nominal Mix / Design Mix 388 Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Propsand Removal Of Formwork For Upto Floor Five Level For : 389 Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands , Coping, Bed Plates, Anchor Blocks, Sills, Chhajjas Lintel, Beam Etc. 390 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding ( Including Cost Of Binding Wire ) All Complete Up To Floor Five Level. 391 Hot Rolled Deformed Bars ( Is : 1139 ) . 392 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished: 393 20 Mm Thick. 394 Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In : 395 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 396 Half Brick Masonry In Superstructure , Above Plinth Level Upto Floor Fivelevelusing F.P.S. Bricks Of Designation 75 397 Cement Mortar 1:4 ( 1-Cement:4-Coarse Sand ) . 398 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacture ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer In Charge In Skiriting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm Including Pointing In White Mixed With Pigment Of Matching Shade Complete. 399 Category - I : Kajariya, Jhonson, Orient, Somani Make Etc. 400 Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal, Dehydreresin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure ‘A’ 401 30 Mm Thick Shutter 402 Commercial Veneer Both Side 403 Providing And Fixing Fully Paneled Double Leaf Shutter For Doors As Per Approved Design And Drawing With Approved Ordinary C.P. / Oxidized Steel Fittings As Per Annexure – A’ And Width Of Styles & Top Rails Of 100Mm And Lock Rails Width Of 150Mm And Bottom Rails Of 200Mm Width Including Teak Wood Beading Of Size 19Mmx12mm On Both Faces Complete : 404 30 Mm Thick Ghana Teak Wood Grade - I 405 Wire Gauge 24 Gauge 14 Mesh Of Is Designation 85 Gauge Wires Of Dia 0.56 Mm Panels 406 Demolishing Cement Concrete Including Disposal Of Material Within 50 Meter Lead : 407 1:3:6 Or Richer Mix. 408 Demolishing Of R.C.C. Work Including Stacking Of Steel Bars And Disposal Of Unserviceab Le Material Within 50 Meters Lead. 409 Providing And Fixing Steel Gate Grating And Grills Made Of Angles, Tees, Square Bars Or Other Flats Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide. 410 Providing & Fixing Ms Sheet Single Leaf Door Shutters In Angle Iron Frame 35X35x5 Mm Suitablly Diagonally Braced With 25X3mm Flat Ironabove And Below Lock Rail Of Size 50X5 Mm Beading Extra Includingall Fittings, As Per Direction Of Engg. Incharge But Excluding Coes Of Chokhats Including Two Coats Of Anti Corrastie Red Oxide Primer Panit. 411 Ms Sheet 18 Swg 412 Providing & Fixing Steel Glazed Doors, Windows And Ventilators With Shutters Of Standred Rolled Steel Section Joint Mitred And Welded With Steel 13X3mm Lugs 10 Cm. Long Embedded In Cement Concrete Blocks 15X10x10 Cm. Of 1:2:4 ( 1-Cement:2-Coarse Sand:4-Graded Stone Aggregate 20 Mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required, Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Copper Glazing Clips And Special Metal-Sash Putty Of Approved Make, Or Metal Beading With Screws Complete Including Priming Coat Of Approved Steel Primer, Excluding The Cost Of Metal Beading And Other Fittings Except Necessary Hinges Of Pivots Steel Handles And Peg Stay Etc. As Required. 413 Patially Fixed And Partially Openable Fixed Area Not Exceed 33% 414 Supplying And Fixing Fixed Wire Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3mm With Suitable Screw At Not Exceeding 150 Mm Distance. 415 14 Mesh X 24 Gauge 416 Providing And Fixing 20 Mm Thick Precast Terrazo Tiles Of Approved Make, With Marble Chips Of Size Upto 6Mm Laid Over Roof With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Cutting , Grinding Rubbing With Machinecomplete On 20 Mm Thick Bed Of Cement Sand Mortar 1 : 4. 417 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches By Sandal / Loi. ( Only For Colour Changing Only ) . 418 Distempering With Dry Distemper Of Approved Brand And Shade ( Two Or More Coats ) And Of Required Shade On New Work, Over And Including, Priming Coat Of Whiting To Give An Even Shade Including All Scaffolding. 419 Finishing Wall With Water Proofing Cement Paint Of Approved Brand And Manufacture And Or Required Shade To Give An Even Shade Including All Scaffolding: 420 New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) . 421 Old Work ( One Or More Coats ) . 422 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Togive An Even Shade : 423 Two Or More Coats On New Work. 424 One Or More Coats On Old Work. 425 Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement Including Cement Slurry, Making Of Lines Or Groove Etc Complete But Excluding The Cost Of Nosing Of Steps Etc. Complete. 426 40 Mm Thick With 20 Mm Thick Nominal Size Aggregate. 427 75 Mm Thick With 20 Mm Thick Nominal Size Aggregate. 428 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thickbase Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Completewith Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) 429 For Area Of Each Slab Up To 900 Sq. Cm 430 For Area Of Each Slab Up To 901 To 2000Sq. Cm 25 Mm Thick Slab. 431 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Level 432 M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 433 Add 5 % For Water Supply And Sainatry Works 434 Add 10 % For Electric Works 435 Horticulture 436 Cutting Of Trees, Including Cutting Of Trunks, Branches And Removal Of Stumps, Roots, Stacking Of Serviceable Material With All Lifts And Up To A Lead Of 1000 Mtrs And Earth Filling In The Depression / Pit To Required Compaction As Per Mort&H Specification Clause 201. ( Measurment Of Girth To Be Done At Height Of 1 M Above Ground Level ) 437 Girth From 300 Mm To 600 Mm 438 Clearing Grass And Removal Of Rubbish ( Maximum 150Mm ) By Manual Means And Disposal At A Lead Of 50 Metres As Per Mort&H Specification Clause 201. 439 Supply Of Dry Manure Including Loading Unloading, Transportation & Stacking At Site. 440 From Yard Manure ( Organic ) 441 Compost 442 Goat Dungmanure 443 Supply & Stacking Good Earth At Site Complete Including Loading Unloading & Transporation Etc. 444 Supply Of Insecticides & Pesticides At Store In Dust / Liquid Form Complete 445 Methly Prathion 2% 446 Supply Of Different Varities Of Tree / Shrubs / Climbers According To Height And Age Of The Plant At Site Including Loading / Unloading & Transportation Etc. Complete: 447 Different Flowing Plants 900 Mm To 1500 Mm 448 Different Varrities Of Shrubs 600 Mm To 900 Mm 449 Different Varrities Of Climbers 900 Mm To 1500 Mm 450 Laying Of Lawns Including Ploughing Levelling Breaking Of Clods Manuring & Removal Of Stones Etc. ( Cost Of Manure Of Extra Good Earth To Be Paid Seperatley ) Maintenance Of Lawns For 30 Days Of More Till The Grass Forms A Thick Lawns Free From Weeds & Fit For Mowing In The Duration Of Planting If Lawn Die Some Where The Contractor Will Replant It At His Own Cost. 451 In Rows 7.5 Cms. Apart In Either Direction 452 Renovating Lawns Including Weeding Cheeling The Grass Forking The Ground Top Dressing With Manure. Mixing The Same With Forked Soil Watering Maintaing The Lawns For 30 Days Or More Till Grass Forms A Thick Lawns Free From Weeds & Fit For Mowing & Disposal Of Rubbish As Directed. 453 Road And Drainage Work 454 Providing, Laying, Spreading And Compacting Of Granular Sub-Base By Providing Close Graded Material ( Table 400-1 ) , Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Vibratory Roller To Achieve The Desired Density, Complete As Per Mort&H Specification Clause - 401 Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. 455 Grading - Ii Material 456 Providing Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes As Per Table 400-7 To Water Bound Macadam Specification Including Spreading In Uniform Thickness; Hand Packing, Rolling With Power Roller 8-10 Tonnes, In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening ( Table 400-8 ) Binding Materials To Fill Up The Interstices Of Coarse Aggregates, Watering ( With Water Browser ) And Compacting To Required Density, Making Necessary Earthen Bund To Protect Edges As Per Clause 404 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion Complete 457 Crusher Broken -Grade-Ii ( 63-45Mm ) 458 Providing And Applying Primer Coat Over Prepared Surface Of Granular Base With Bitumen Emulsion As Per Is : 8887 And Approved Quality @ 0.6 Kg / Sqm With The Help Of Spray Set Fitted On Bitumen Container ( Boiler ) After Cleaning The Surface Including Removing Of Binding Material And Other Foreign Matter With Wire Brushes And Small Picks, Sweeping With Brooms Or Soft Brushes And Finally Dusting With Old Gunny Bags And Compressed Air To Receive Bituminous Treatment Complete As Per Clause 502 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. 459 Providing And Laying Open Graded Premix Carpet 20Mm Thick ( Compacted ) , On Prepared Surface In A Single Course As Wearing Course, Composed Of Specified Graded Crushed Stone Aggregate As Per Table 500-23, Premixed With Bituminous Binder @ 14.60 Kg / 10Sqm ( Including Cost Of Anti-Stripping Compound Wherever Required ) , Including Loading Of Material With F.E. Loader, Hot Mixing Of Stone Aggregate And Bitumen In Computerised Hot Mix Plant, Transporting The Mixed Material By Tippers To Paver And Laying With Paver Finisher Fitted With Electronic Sensor Control To The Required Level And Grade, Compacting Smooth Wheeled Roller 8-10 Tonne Capacity And Finishing To Required Level To Achieve The Desired Density As Per Clause 511 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion But Excluding Cost Of Tack Coat / Seal Coat. 460 With Bitumen Vg-Grade 30 461 Providing And Applying Premixed Seal Coat Type B Comprising Of Thin Application Of Fine Aggregate 0.06 Cum / 10 Sqm Premix With Bitumen Binder @ 6.8 Kg / 10 Sqm ( Including Cost Of Anti-Stripping Compound Wherever Required ) Laying With Paver Finisher With Electronic Sensor Control And Rolling With Power Roller 8-10 Tonne Complete As Per Clause 513 Of Mort&H Specification Including All Material, Labour, Machinery, Lighting, Guarding And Maintenance Of Diversion. 462 With Bitumen Vg-Grade 30 463 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 464 Random Rubble Stone Masonary For Foundation And Plinth In Cement Sand Mortar Above 30 Cm. Thick Wall In : 465 Cement Mortar 1:6 ( 1-Cement:6-Sand ) . 466 Brick Work With F.P.S. Bricks Of Class Designation 75 Infoundation And Plinth In: 467 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 468 Providing And Laying Reinforced Cement Concrete Pipe Np4 / Prestrssed Concrete Pipe For Culverts Including Jointing Ends And Fixing Collar With Cement Mortar 1:2 Complete As Per Clause 1000 & 2900 Of Mort&H Specification Including All Material, Labour Form Work, Machinery. 469 200 Mm Internal Diameter 470 Providing And Fixing Of Reinforced Ferro-Cement Drain Covers Designed For A Class Loading Duly Marked On Cover With Adequate Steel Reinforcement Having Thickness 75Mm To 150Mm Anti Corrosive Bitumen Painted M.S. Plate , Rim And M.S. Lifting Hooks, Admixtures Like Plasticizer, Bond Improving Compound, Shrinkage, Resistance Compound, Abrasion Resistant Complete As Per Approved Design Etc 471 Standard Size 600X800mm ( 75Mm Thick ) For Span 300 To 450Mm 472 Campus Lighting 473 Supply And Erection Of Octagonal Pole Of Following Length And Dimension As Per Table-3 With Base Plate On The Cement Concrete Foundation Of M-15 / M-20 Grade ( 1:1.5:3 ) With The Help Of Anchor Bolts Of Grade 6.8 ( Is 1367 P Iii ) . The Pole Shall Be Made Of S-355Jo Grade Steel Sheet , Folded Lengthwise To Obtained Octagonal Shape, Having Single Longitudinal Seam Weld And Hot Dipped Galvanised Internally & Externally In Accordance With Is 2629. The Pole Shall Have A Weatherproof Flush Door And Locking Arrangements. The Complete Work Shall Be Supervised And Certified By The Manufacturers For Satisfactory Supply, Erection, Testing And Commissioning. 474 7 Mtr 475 Supply, Erection And Fixing Of Hot Dipped Galvanised Overhang ( 60 X 3.25 Mm ) With Cap ( 250 X 137.9 X 4.05 Mm ) Over The Existing Poles 476 Single Arm Overhang 477 P & F Of Ip 65 / 67 Protected Led Flood Light System With Aluminium Housing, 3 X 1W, 220V, 50Hz Led Lamps With Dynamic Color Changing Capability Available In Quick Connecting Cable Coupled With Various Mounting Accessories. Ability To Create 16.7 Million Uniform, Smooth And Brilliant Colors Without Revealing Any Lamp Image. Available In 5 Colors – Amber, Green, Blue, Red And White. 478 Providing & Laying Xlpe Insulated / P.V.C. Sheathed Cable Of 1.1 Kv Grade With Aluminium Conductor Armoured Of Is:7098-I / 1554-1 Approved Makein Ground As Per Is:1255 Including Excavation Of 30Cmx75cm Size Trench, 25 Cm Thick Underlayer Ofsand, Second Class Bricks Covering, Refilling Earth, Compaction Of Earth, Making Necessary Connection, Testing Etc. As Required Of Size 479 10.0 Sq.Mm2 Cor 480 Repair Of Residantialbuilding At Churu, Bhaleri, Like Repair Of Plaster, Floor, Roof, Doors, Windows, Color Washing, Painting Etc. 481 Repair To Brick Masonary In Cement Sand Mortar With Taking Out Of Deceayed From Wall And Replaceing With New Briks.Cement Sand Mortar 1:6. With New Brick. 482 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead : With Cement Mortar 1 :4 ( 1 Cement : 4 Fine Sand ) 483 Repair To Stone Masonary In Cement Sand Mortar 1:6 With Old And New Stone. 484 Cutting Jhiri Above 75Mmx75mm And Below 150X150 Mm Etc. And Making Good. 485 Scraping Old Surface And Redoing Lime Loi Or Sandla. 486 Renewing Glass Panes, With Puty And Nails Wherever Necessary: 487 5.5 Mm Thick Plain Glass Panes. 488 Renewing Glass Panes With Wooden Fillets Wherever Necessary: 489 5.5 Mm Thick Plain Glass Panes. 490 Providing And Fixing 16 Mm M.S. Fan Clamps Of Standard Shape And Size In R.C.C. Slab / Stone Slab Roofing Including Cutting Chase And Making Good And Painting Exposed Portion Of The Clamps Complete: 491 In Existing Roof. 492 Guniting Damaged R.C.C. Slab, Beams And Columns For Strengthening With Cement Sand Mortar 1:2 ( 1-Cement:2-Sand ) Including Preparing The Surface, Making V Shaped Joints, Cleaning The Reinforcement Bars With Jet Of Potable Water And Drying With Compressed Air, Including Cost Of Centering And Shuttering And Finishing To Match The Existing Surface Etc. Complete, Including Provided M.S. Welded Mesh To Gauge 25 Mm X 25 Mm Framing With Average Thickness Of 25 Mm. 493 Chopping Loose And Cracked Concrete To Required Depth, Cleaning The Exposed Surface Of Steel And Concrete With Wire Brush And Sand Blasting, Clening With A Jet Of Water / Air As Necessary And Getting It Dried With Compressed Air Including All Scaffolding: 494 Depth 50 Mm To 75 Mm. 495 Depth 75 Mm To 100 Mm. 496 Repairofdoor, Windowshuttersincludingcostofmaterialandlabourforchangeofdamaged : 497 Style / Rail Of Teak Wood 30Mm Thick / Aluminium Section 498 4Wide 499 6 Wide 500 Panel By 501 Shuttering Ply - 9Mm Thick ( Commercial ) 502 Wire Gauge 14 Mesh X 24 Gauge 503 Plain Glass Panes 4Mm Thick 504 Aldrop Of Mild Steel 505 12 Long X12mm Dia 506 8 Long X 10Mm Dia 507 Stopper Of Aluminium With 508 Single Rubber Gutka 509 Double Rubber Gutka 510 Door Springs Of Mild Steel 511 Steel Hinges 512 For Wooden Chowkhat 3 Size. 513 For Wooden Chowkhat 4 Size 514 For Stone Chowkhat , 4Size 515 Mild Steel Tower Bolt 6 Long 516 Steel Locking Bolt 517 Steel Handle 6 Size 518 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Level 519 M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 520 M10 Grade Nominal Mix 1: 3: 6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stoneaggregate 20Mm Nominal Size ) . 521 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggre -Gate 20 Mm Nominal Size ) Over 75Mm Bed Of Dry Brick Ballast 40Mm Nominal Size Well Rammed And Consolidated And Grouted With Fine Sand Including Finishing The Top Smooth. 522 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished: 523 20 Mm Thick. 524 Providing And Fixing Expanded Metal Mesh Of Size 20X60 Mm And Strands 3.5 Mm Vide 1.6 Mm Thick Weighing 3.64 Kg. Per Sqm. For Encasing Ofrolledsteel Sections In Beams, Columns And Grillages Excluding Cost Of Hangers. 525 Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In : 526 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 527 Half Brick Masonry In Superstructure , Above Plinth Level Upto Floor Fivelevelusing F.P.S. Bricks Of Designation 75 528 Cement Mortar 1:4 ( 1-Cement:4-Coarse Sand ) . 529 Brick Work In Partition In Super Structure Upto Five Storey 7Cm. Thick ( Brick On Edges ) Using F.P.S. Bricksof Class Designation 75 In : 530 Cement Mortar 1:4 ( 1-Cement:4-Coarse Sand ) . 531 Supplying And Fixing Machine Cut And Polished Stone Shelves, Tands And Sills In Cm 1:3 With Machine Cut Edges: 532 Kota Stone 25 To 30 Mm Thick. 533 Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills, Counters. Floors Etc. Laid On 12Mm ( Av. ) Thick Base Of Cement Mortar 1:3 Jointing With White Cement Mortar 1:2 ( 1 White Cement: 2 Marble Dust ) With Pigment To Match The Shade Of The Marble Slab Complete Including Grinding, Rubbing And Polishing Of: 534 Jhunjhunu / Jalore ( Red / Choclate Colour ) 535 Above 3601 Cm2 Slabs 536 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption’S Less Than 0.08% And Conforming To Is : 15622 Of Approved Make In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. 537 Size Of Tile 60X60 Cm 538 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is : 15622 ( Thickness To Be Specified By The Manufacture ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer In Charge In Skiriting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg Per Sqm Including Pointing In White Mixed With Pigment Of Matching Shade Complete. 539 Category - I : Kajariya, Jhonson, Orient, Somani Make Etc. 540 Providing & Fixing In Cement Sand Mortar 1:4 Single Paitam ( Rebated ) Stone Doors Windows And Ventilator Frames Of Approved Quarry : 541 Size 100X75mm. 542 Size 125X100mm. 543 Providing And Fixing In Cm 1:4 Double Paitam ( Rebated ) Stone Door Window And Ventilator Frames Of Approved Quarry : 544 Size 125 X 100Mm. 545 Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal, Dehydreresin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure ‘A’ 546 30 Mm Thick Shutter 547 Commercial Veneer Both Side 548 Decorative Teakveneer One Side 549 Providing And Fixing Fully Paneled Double Leaf Shutter For Doors As Per Approved Design And Drawing With Approved Ordinary C.P. / Oxidized Steel Fittings As Per Annexure – A’ And Width Of Styles & Top Rails Of 100Mm And Lock Rails Width Of 150Mm And Bottom Rails Of 200Mm Width Including Teak Wood Beading Of Size 19Mmx12mm On Both Faces Complete : 550 30 Mm Thick Ghana Teak Wood Grade - I 551 Wire Gauge 24 Gauge 14 Mesh Of Is Designation 85 Gauge Wires Of Dia 0.56 Mm Panels 552 Demolishing Cement Concrete Including Disposal Of Material Within 50 Meter Lead : 553 1:3:6 Or Richer Mix. 554 Demolishing Of R.C.C. Work Including Stacking Of Steel Bars And Disposal Of Unserviceab Le Material Within 50 Meters Lead. 555 Demolishingbrickwork Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meters Lead. 556 In Cement Mortar. 557 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded With 15X3 Mm Lugs 10 Cm. Long Embedded In Cement Concrete Blocks 15X10x10 Cm. Of 1:2:4 ( 1-Cement:2-Coarse Sand:4-Graded Stone Aggregate 20 Mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 558 Providing And Fixing Steel Gate Grating And Grills Made Of Angles, Tees, Square Bars Or Other Flats Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide. 559 Providing & Fixing Ms Sheet Single Leaf Door Shutters In Angle Iron Frame 35X35x5 Mm Suitablly Diagonally Braced With 25X3mm Flat Ironabove And Below Lock Rail Of Size 50X5 Mm Beading Extra Includingall Fittings, As Per Direction Of Engg. Incharge But Excluding Coes Of Chokhats Including Two Coats Of Anti Corrastie Red Oxide Primer Panit. 560 Ms Sheet 18 Swg 561 Providing & Fixing Steel Glazed Doors, Windows And Ventilators With Shutters Of Standred Rolled Steel Section Joint Mitred And Welded With Steel 13X3mm Lugs 10 Cm. Long Embedded In Cement Concrete Blocks 15X10x10 Cm. Of 1:2:4 ( 1-Cement:2-Coarse Sand:4-Graded Stone Aggregate 20 Mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required, Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Copper Glazing Clips And Special Metal-Sash Putty Of Approved Make, Or Metal Beading With Screws Complete Including Priming Coat Of Approved Steel Primer, Excluding The Cost Of Metal Beading And Other Fittings Except Necessary Hinges Of Pivots Steel Handles And Peg Stay Etc. As Required. 562 Patially Fixed And Partially Openable Fixed Area Not Exceed 33% 563 Supplying And Fixing Fixed Wire Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3mm With Suitable Screw At Not Exceeding 150 Mm Distance. 564 14 Mesh X 24 Gauge 565 Providing And Fixing 20 Mm Thick Precast Terrazo Tiles Of Approved Make, With Marble Chips Of Size Upto 6Mm Laid Over Roof With Neat Cement Slurry Mixed With Pigment To Match The Shade Of The Tiles, Including Cutting , Grinding Rubbing With Machinecomplete On 20 Mm Thick Bed Of Cement Sand Mortar 1 : 4. 566 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches By Sandal / Loi. ( Only For Colour Changing Only ) . 567 Distempering With Dry Distemper Of Approved Brand And Shade ( Two Or More Coats ) And Of Required Shade On New Work, Over And Including, Priming Coat Of Whiting To Give An Even Shade Including All Scaffolding. 568 Finishing Wall With Water Proofing Cement Paint Of Approved Brand And Manufacture And Or Required Shade To Give An Even Shade Including All Scaffolding: 569 New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) . 570 Old Work ( One Or More Coats ) . 571 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Togive An Even Shade : 572 Two Or More Coats On New Work. 573 One Or More Coats On Old Work. 574 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thickbase Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Completewith Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) 575 For Area Of Each Slab Up To 900 Sq. Cm 576 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Level 577 M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 578 Add 10 % For Water Supply And Sainatry Works 579 Add 10 % For Electric Works 580 Repair Of Boundry Wall At Pmc, Bhaleri, Including Provinf Fixing Of Borbed Wire Fancing Repair Of Gates Et. 581 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 582 Random Rubble Stone Masonary For Foundation And Plinth In Cement Sand Mortar Above 30 Cm. Thick Wall In : 583 Cement Mortar 1:6 ( 1-Cement:6-Sand ) . 584 Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead : With Cement Mortar 1 :4 ( 1 Cement : 4 Fine Sand ) 585 Repair To Stone Masonary In Cement Sand Mortar 1:6 With Old And New Stone. 586 Cutting Jhiri Above 75Mmx75mm And Below 150X150 Mm Etc. And Making Good. 587 Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering =All Up To Plinth Level 588 M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 589 Providing And Laying In Position Specified Grade Ofcement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Making Good The Joints And Cost Of Plastizers ( If Required ) Excluding The Cost Of Centering, Shuttering And Reinforcementfor Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. M20 Grade Nominal Mix / Design Mix 590 Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Propsand Removal Of Formwork For Upto Floor Five Level For : 591 Columns, Pillars, Posts And Struts Etc. 592 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding ( Including Cost Of Binding Wire ) All Complete Up To Floor Five Level. 593 Hot Rolled Deformed Bars ( Is : 1139 ) . 594 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished: 595 20 Mm Thick. 596 Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In : 597 Cement Mortar 1:6 ( 1-Cement:6-Coarse Sand ) . 598 Structural Steel Work In Single Section Fixed With Or Without Connecting Plate Including Cutting, Hoisting ( Height Upto 10 M ) , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 599 Providing And Fixing Steel Gate Grating And Grills Made Of Angles, Tees, Square Bars Or Other Flats Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide. 600 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches By Sandal / Loi. ( Only For Colour Changing Only ) . 601 Finishing Wall With Water Proofing Cement Paint Of Approved Brand And Manufacture And Or Required Shade To Give An Even Shade Including All Scaffolding: 602 Old Work ( One Or More Coats ) . 603 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Togive An Even Shade : 604 Two Or More Coats On New Work. 605 One Or More Coats On Old Work. 606 Part : E Electrical Works 607 33 Kvring Main Unit Consisting Of 2 Lbs At Incoming & 2 VcbSoutgoing As Per Requirements And Specifications. 608 Stranded Compact Circular Aluminium Conductor, Conductor Screened With Extruded Semi Conducting Compound, Xlpe Insulated, Insulation Screened With Copper Tape, Cores Laid Up, Inner Sheath Of Pe Type, Galvanised Steel Flat Strip Armoured And Overall Pvc Sheathed Cable Confirming To Is 7098 / Ii / 85 With Latest Amendments Of 33 Kv ( Ue ) 609 3Cx300 Mm2 610 Providing & Making Heat Shrinkable Type Indoor / Outdoor / Straight Through Terminations / Joint Kit Of Approved Make Suitable For Xlpe Insulated 33 Kv Cable, With Required Components, Prepration Of Cable Ends, Testing Etc. 611 3 Core 240 / 300 / 400 Sq.Mm 612 Outdoor 613 Indoor 614 Sitc Of Floor Mounted Pmcc ( Indoor, Dust Proff Ip-4X Front Operated With 2 Mm Thick Sheet Metal Compartmentalised ) With All Accessible Parts, Head Shrinkable Sleeves, Smc / Dmc Bus Bar Supports, Padlocking Facility On Outgoing Feeders Etc. 615 Lv Capacitor With Apfc Panel 616 Sitc Of Microprocessor Based Intelligent Power Factor Correction Relay Having Sensitivity Up To 50 Milli Amp Secondary Current And Following Way, Self Analysing Auto C / K Setting According To Targeted Power Factor Setting, The Relay Shall Have Minimum Three Digit Display Unit For Display Of Real Power Factor, Targeted Power Factor, Lag / Lead Capacitor Switching Status, Alarm Output For Under Current, Over Current, Insufficient Compensation, Indication Of Switching On Units, Auto / Manual Status, And 6 To 14 Stage - Sensitivity Upto 50 Milli Amp. 617 Sitc Of Self Healing Mpp / Mp Type Shunt Capacitor ( Banks ) Conforming To Is:13340-41 / Iec :831-1&2 In Existing Panel Or Parallel With Load Terminals , The Capacitor Shall Be Fitted With Discharge Resistors, Pressure Sensitive Disconnector ( Psd ) And Shall Have Dissipation Factor Less Than 0.0025 At 50 Hz And Total Wattage Loss Less Than 0.5 Watt Per Kvar. Including Making Connections With Suitable Capacity Conductors / Cables Testing As Required.Heavy Duty Three Phase 440 V , 50 Hz Capacitor ( Bank ) 618 P / Laying Xlpe Insulated / P.V.C. Sheathed Cable Of 1.1 Kv Grade With Aluminium Conductor Armoured Of Is:7098-I / 1554-1 Approved Make In Ground As Per Is:1255 Including Excavation Of 30Cmx75cm Size Trench, 25 Cm Thick Under Layer Of Sand, Iind Class Bricks Covering, Refilling Earth, Compaction Of Earth, Making Necessary Connection, Testing Etc. As Required Of Size. 619 3 / Cx6 Sq Mm 620 3 / Cx10 Sq Mm 621 3 / Cx16 Sq Mm 622 3 / Cx25 Sq Mm 623 3 / Cx240 Sq Mm 624 Supplying And Making One End Termination With Heavy Duty Double Compression Brass Gland Sibg Type, Aluminium Lugs Duly Crimped With Crimping Tool, Pvc Tape Etc For Following Size Of Armoured Pvc Insulated & Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1100 Volt Grade As Required Of Size. 625 3 / Cx6 Sq Mm 626 3 / Cx10 Sq Mm 627 3 / Cx16 Sq Mm 628 3 / Cx25 Sq Mm 629 3 / Cx240 Sq Mm 630 Providing & Laying Xlpe / Pvc Pvc Insulated & Pvc Sheathed Armoured Control Cable Of 1.1 Kv Grade With Copper Conductor As Per Is 1275 Including Escavation Of 30Cmx 75 Cm Size Trench 25 Cm Thick Under Layer Of Sand And Lind Class Of Bricks Covering 631 3C X 2.5 Sq.Mm 632 5Cx1.5 Sq Mm 633 14Cx1.5 Sq Mm 634 Supply & Makingone End Termination With Heavy Duty Single Compression Brass Gland Sibg Type, Copper Lugs Duly Crimped With Crimping Tool, Pvc Tape Etc For Following Size Of Arrmoud Pvc Insulated And Pvc Sheated / Xlpe Almunium Cunductor Cable Of 1100 Volt Grad As Required Size. 635 3C X 2.5 Sq.Mm 636 5C X 2.5 Sq.Mm 637 14 C X 2.5 Sq.Mm 638 Supply, Fabricating & Installing Following Sizes Of Perforated Cable Trays Including Horizontal And Vertical Bends, Reducers Tees, Cross Members And Other Accessories As Required And Duly Suspended From The Ceiling With Suspenders And Including Painting As Required. 639 600Mm X 50Mm X 2.0Mm 640 150Mm X 50Mm X 1.6Mm 641 Supply, Installation, Testing And Commissioning Of Copper Wound Transformers 33 / 0.433 Kv, Three Phase, 50 Hz, Dyn 11, Onan Type , Standard Accessories With Off Load Tap Changer ( +5% To -10% In Steps Of 2.5% ) , Winding / Top --- Temperature Rise Of 45°C / 40°Cfirst Fill Oil, Having Permissible Total Loss Values Not Exceeding 7.5% Of The Maximum Total Loss Values For 11 Kv As Per Energy Efficiency Level - 2 At Basic Insulation Level Conferming To Iss 2026 ( Part- I To Part - Ii ) , Latest Ammended And Is 1180 Part-I : 2014. Transformers Described As Above And As Per The Following Continuous Rating 642 400 Kva 643 1250 Kva 644 1600 Kva 645 S.I.T.C. Of Bus Duct Arrangement In Convenient Sections Complete With Enclouser Of Crca Sheet Steel Of Minimum 2 Mm Thickness, Aluminium Bus Bar And Earth Bus For Use On 3 Phase, 4 Wire, 415 Volts, A.C. Supply With Degree Of Protection Ip-42 For The Following Current Carrying Capacity, Including Jointing Of Sections, Copper Flexible Joints. Expansion Joints, Bends, And Earthing With 2 Runs Of Alum. Strips Etc. As Required 646 1 Straight Run With 2 Earth Bus 3200 Amp 647 Bend 3200 Amp 648 Copper Flexible Tpn 3200 Amp 649 Supply Installation Testing & Commissioning Of Local Push Button Stations 650 Maintenance Free Gel Earthing With Pipe In Pipe / Strip In Pipe Technology Filled With Anti Corrosive Conductive Compound ( Cpri Tested ) Below The Ground In 150 -200 Mm Dia Earth Pit And Surrounding Filled With Required Mineral Filling Compound ( Mfc Should Have Hygroscopic Proper Ty To Retain The Moisture For Long Time To Create Low Resistance Zone ) And C.C. Finished Chamber Covered With Hinge Type With Locking Arrangement C.I Cover. C.I. Frame Of Size 300Mm X300mm Complete Testing Of Earth Resistance As Required Of Following Sizes With Pipe In Pipe Technology ( Inner Pipe Dia / Outer Pipe Dia ) 80 -100 Micron G.I. Coating Of The Size G.I. Pipe 3000 Mm Long , 80 / 40 Mm , Terminal 14 Mm G.I. Strip 651 S & Laying Following Size Earth Wire / Strip In Horizontal Or Vertical Run In Ground / Surface / Recess Including Riveting, Soldering, Saddles, Making Connection Etc. As Required. 652 50Mm X 6Mm G.I. Strip 653 25Mm X 6Mm G.I. Strip 654 25Mm X 3Mm G.I. Strip 655 10 Swg G.I. Wire 656 P & F Lightning Conductor Final Made Out Of 25 Mm Dia., 300 Mm Long Copper Tube Having Single Prong At Top With 85 Mm Dia., 3 Mm Thick Copper Base Plate Including Holes Etc. Complete As Required. 657 Part : F Instrumentation & Scada 658 Sitc Of Ultrasonic Level Transmitter Suitable For Measuring Water Level In Reservoir, Normal Powered 24Vdc, Type Of Transmitter: Two Wire ( 4-20 Ma ) , Cable Entry:1 / 2 Npt ( F ) , Sensor Material: Pp, Slip-On Flange: 2 ½” Flange, Material Of Construction For Slip-On Flange: Pp, Output 4~20Ma, Hart Compatible, Accuracy + / _ 0.2 % As Per Detailed Technical Specification, Scope Of Work And Direction Of Engineer In Charge. Measuring Range 0.0 To 6.0 Mtr 659 Providing, Installation, Testing And Commissioning Of Diaphragm Type Pressure Gauges Dial Size 150 Mm Glycerin Filled Shatterproof Glass, Over Range Protection: 125% Of Maximum Pressure, Material Of Sensor And Other Wetted Parts: Ss Type 316, Housing Material: Die Cast Aluminum 660 Providing, Installation, Testing And Commissioning Of Pressure Transmitter For Water Application: Range: 0-10 Bar / Power Supply: 24 V Dc / Output: 4-20 Ma With Hart / Diaphragm: Ss316l / Process Connection: 1 / 2 Npt ( M ) / Accuracy: 0.15% Protection: Ip671 / 2 M ( Npt ) 661 Sitc Of D / F Full Bore Type Electromagnetic Flow Meter Of Approved Make Of Following Dia And Specifications Complete: Media : Water ( Raw / Chlorinated ) , Pressure : Up To 1.5Mpa, Process Temp: - 50 Deg C, Flow / Meter Tube : Ss 304, Electrode : Ss Aisi 316L / Hastelloy C276 / Tantalum, Lining Material : Hard Rubber / Neoprene / Poly-Urethane ( Pu ) , Flange : Ss / Cs, Flange Standard & Rating : Ansi 150, Coil Housing : Ss Aisi 304 / Carbon Steel / Die Cast Aluminium, With Anticorrosive Paint & Provide Completely Sealed ( Leak Proof ) Construction As Per Requirement Of Iec 60529, Accuracy : ± 0.5 % M.V.- Velocity 0.3 To 10 M / S, Transmitter / Signal Convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V Ac - 50Hz, Output 1 : 4-20 Ma, Output 2: Pulse, Communication Output : Rs 485 / Heart, Display Type : Lcd / Led Display, Cable Entry : M20 X 1.5, Provision Of Ram / Prom To Store Calibration And Configuration Parametersand Totalizer Value During Power Failure, Protection Category- Ip 68 For Sensor ( Flow Tube ) And Ip 67 For Transmitter / Convertor, Including Surge Arrester, If Required, And All Materials Required For Making Connection With Existing Pipeline Including Cutting The Existing Pipeline Etc. Complete In All Respect As Per Technical Specification And As Per Direction Of Engineer In-Charge.Note: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work. 662 150 Mm Dia 663 200 Mm Dia 664 250 Mm Dia 665 400 Mm Dia 666 900 Mm Dia 667 Sitc Of Bulk Flow Meter With Removable Mechanism Class B Confirming To Iso:4064:2005 / Is: 2373Of Approved Make Of Following Dia Sized Pipelines And Specifications Complete:Media : Water ( Clear ) , Temp. 50 Deg., Pr. Rating: Pn16, Protection Type: Ip- 68, Body Material : Is-210 Gr. Fg-200, Accuracy Class :Class B ( ±2 % @ Nominal Flow Rate ) , Magnetic Drive, Dry Dial, Epoxy Powder Coated, Pulse Out Put Option, Anti-Magnetic Protection Including All Materials And Making Connection With Existing Pipeline Required For Bulk Flow Meter Including Cutting The Existing Pipeline Etc. Complete In All Respect As Per Technical Specification And As Per Direction Of Engineer In-Charge.Note: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work. 668 Bfm 100 Mm 669 Bfm 150 Mm 670 Bfm 250 Mm 671 Sitc Of Rtu Complete With Di, Do, Ai And Modbus Communication Ports And Power Supply ( 24 V, Dc ) 672 Providing And Laying Stranded / Flexible Annealed Bare Copper Conductor , Xlpe / Pvc Insulated 2 Pair 1.5 Sqmm Suitably Laid Up Together Overall Polyester Taped Al ( Mylar Tape Wrapped ) Along With Atc Drain Wire Overall Pvc Sheathed ( St-1 ) Overall Screened Triad Armoured Instrumentation Cables Generally Confirming To Pas 5308- Part-2-2009 673 Providing & Laying Xlpe / Pvc Pvc Insulated & Pvc Sheathed Armoured Control Cable Of 1.1 Kv Grade With Copper Conductor As Per Is 1275 Including Escavation Of 30Cmx 75 Cm Size Trench 25 Cm Thick Under Layer Of Sand And Lind Class Of Bricks Coveringsize 3C X 2.5 Sq.Mm 674 Supply, Installation, Testing And Commissioning Of Mnre Approved Off Grid Solar Panels For Running Of Motor Pumps With 25 Years Of Linear Generation Warranty, Work Includes Designing Of Solar Panel Area And Ms Frame And Foundation On Ground / Roof Of Pump House Or Cwr, Showing Arrangement Of Panel In Available Space, Installation Of Pv Module On Ms Frame As Per Approved Design And Drawings. Mounting Structure Shall Be Suitably Design To Withstand Wind Velocity Up To 150Km / Hr. The Work Shall Be Executed As Per Detailed Technical Specifications, Approved Drawing And Direction Of Engineer In Charge. Note: There Shallbe5 Year Service Warranty For Solar Panel And Mounting Structure Andsuitable Provision Shall Be Included In Tender Document ( Each Of .5 Kw ) 675 P&F Of Gsm / Gprs Based Data Transmitter Device Forwater Meter Compitable To Scada System. 676 Supply, Installation, Testing, Commissioning Of Plc / Scadasystem Including All Hardwares, Softwares, All Accessorings For Thefollowingpump Houses As Per System Configuration Alongwith Scada For Master Control Centre For Monitering The Water Supply. As Per Scope And Specificationscomplete In All Respect. Ans As Per Direction Of Eic At The Following Locations. 677 Cps Bhalari 678 Supply, Installation, Testing, Commissioning Of Master Control Room Including All Plc / Scadasystem, Hardwares, Softwares, All Accessorings For Thefollowingpump Houses As Per System Configuration Alongwith Scada For Master Control Centre For Monitering The Water Supply. As Per Scope And Specificationscomplete In All Respect. Ans As Per Direction Of Eic At The Following Locations.Churu 679 Part G : Operation & Maintainance & 680 Cost Of Operation And Maintenance Of The System For 10 Years After Defect Liability Period Of One Year @ 6.0%On Above Items Excluding Villages Inrta Systemand As Per Scope Of Work & Specification 681 Operation And Maintenance Charges 1St Year 682 Operation And Maintenance Charges 2Nd Year 683 Operation And Maintenance Charges 3Rd Year 684 Operation And Maintenance Charges 4Th Year 685 Operation And Maintenance Charges 5Th Year 686 Operation And Maintenance Charges 6Th Year 687 Operation And Maintenance Charges 7Th Year 688 Operation And Maintenance Charges 8Th Year 689 Operation And Maintenance Charges 9Th Year 690 Operation And Maintenance Charges 10 Th Year 691 Part H : Dismantling Of Old Pump Sets 692 Cost For Dismantling Of Old Pump Sets, Electrical Panels And Intrumentation Etc And Depositing In Depatmental Stores As Per Direction Of E.I.C. 693 Tps Karamsana 694 Ir-4 695 Cps / Tps Bhaleri 696 Cps / Tps Churu
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Rajasthan View Result →
44.
Public Administrative Department #10226673 Price Bid
Supply, Installation And Commissioning Of Machines, Tools And Equipment For New Age Courses In Itis Of Jharkhand Selection Of Agency For Supply, Installation And Commissioning Of Machines, Tools And Equipment For New Age Courses In Itis Of Jharkhand , A. General Tools , Pliers , Soldering Station , Multi Meter , Tweezers , Binoculars , Anemometer , Magnifier , B. List Of Equipment , Unassembled Drone , Electricity Lab , Smd Technology Kit With Wall Chart , Multiple Output Dc Regulated Power Supply , Dc Regulated Variable Programmable Dc Power Supply , Smart Smd Tweezer Handheld , 1 Mhz Mixed Signal Oscilloscope ( 4 Analog + 16 Digital Channel) , 25 Mhz Arbitrary Waveform Generator With Digital Display For Frequency And Amplitude , Handheld 3 3/4 Digit Multimeter , 3Ghz Spectrum Analyzer With Built-In Tracking Generator , Smd Soldering & De Soldering Station With Necessary Accessories , Or Drone Workbench , Analog-Digital Circuits Development Platform , Applied Mechanics Training Platform , Drone Battery Management Training Systems , Charge Controller Training System , Bldc (Brushless Dc) Motor Training System , Inverted Pendulum , Drone Sensor Trainer Kit , Antenna Training System , Advanced Microwave Integrated Circuit Lab , Gps Training Platform , Wireless Communication Modules , Fcb And Esc Training Platform , Drone Gimbal Set With Motor And Control , Npnt Compliant Micro Uav Built For Mapping And Surveillance. , Hd Payload , Thermal Camera Payload , Field Repair Kits , Drones And Spare Parts Kit , Balance Charger , Power Distribution Board , Laptop Latest Configuration , Thrust Measurement Meter , Indoor Netted Facility , Outdoor Controlled Netted Testing Facility , Different Types Of Electronic And Electrical Cables, Connectors, Sockets, Terminations, Different Types Of Analog Electronic Components, Digital Ics. , 3D Printer , Drone Upto 18Km , A. Trainees Tool Kit (Foradditional Unit Trainees Tool Kit Sl. 1-12 Is Required Additionally) , Connecting Screwdriver , Neon Tester 500 V. , Screwdriver , Insulated Combination Pliers , Insulated Side Cutting Pliers , Long Nose Pliers , Soldering Iron , Electrician Knife , Tweezers , Digital Multimeter With 4000 Counts, Large Display With Auto/Manual And Can Measure Dcv- 1000V-Acv-750V, Dc & Ac A(Minimum) – 10A, Resistance (Minimum) 40M?, Capacitance Minimum 20?F, Capacitance And Frequency (Minimum)– 3 Mhz , Soldering Iron Changeable Bits , De- Soldering Pump Electrical Heated, Manual Operators , B. Shop Tools, Instruments – For 2 (1+1) Units No Additional Items Are Required , Steel Rule Graduated Both In Metric And English Unit , Precisionof Screw Drivers , Tweezers – Bend Tip , Steel Measuring Tape , Tools Makers Vice , Tools Maker Vice , Crimping Tool (Pliers) , Magneto Spanner , File Flat Bastard , File Flat Second Cut , File Flat Smooth , Plier - Flat Nose , Round Nose Pliers , Scriber Straight , Hammer Ball Pen , Allen Key(Hexagonalof 9) , Tubular Box Spanner , Magnifying Lenses , Continuity Tester , Hacksaw Frame Adjustable , Chisel - Cold - Flat , Scissors , Handsaw 450Mm , Hand Drill Machine Electric With Hammer Action , First Aid Kit , Bench Vice , List Of Equipments , Multiple Output Dc Regulated Power Supply , Dc Regulated Variable Programmable Dc Power Supply , Lcr Meter (Digital) Handheld , 70 Mhz Mixed Signal Oscilloscope ( 4 Analog + 16 Digital Channel ) , 25 Mhz Arbitrary Waveform Generator With Digital Display For Frequency And Amplitude , 6 1/2 Digit Digital Multimeter , 3Ghz Spectrum Analyzer With Built-In Tracking Generator , Or Electronics Workbench , Multi Function Test & Measuring Tool For Field Applications And Testing Compatible With Laptop , Electrical Safety Trainer , Analog Component Trainer With Following Seven Basic Modules • Diode Characteristics (Si,Zener,Led) • Rectifier Circuits • Diode As Clipper Circuit • Diode As Clamping Circuit • Zener As Voltage Regulator. • Transistor Type Npn & Pnp And Ce Characteristics • Transistor As A Switch , Digital Ic Trainer , It Workbench For Computer Hardware And Networking , Laptop Latest Configuration , Laser Jet Printer , Internet Broadband Connection , Electronic Circuit Simulation Software With Five User Licenses , Different Types Of Electronic And Electrical Cables, Connectors, Sockets, Terminations. , Different Types Of Analog Electronic Components, Digital Ics, Power Electronic Components, General Purpose Pcbs, Bread Board, Mcb, Elcb , Smd Soldering & De Soldering Station With Necessary Accessories , Smd Technology Kit , Microcontroller Kits (8051) Along With Programming Software (Assembly Level Programming) With Six Important Different Application Modules 1. Input Interface Switch, Matrix Keypad, Ascii Keypad 2. Display Lcd, Seven Segment, Led Matrix 3. Adc & Dac 4. Pc Interface Module 5. Motor Dc, Stepper, Servo 6. Daq , Sensor Trainer Kit Containing Following Sensors A)Air Humidity And Temperature B)Rtd C)Atmospheric Pressure D)Air Quality E)Smoke Detector Sensors F) Limit Switch G)Photo Sensors H)Capacitive Displacement , Different Types Of Electronic And Electrical Cables, Connectors, Sockets, Terminations. , Different Microcontroller/Processor Training And Development Platform For Avr, Pic, Arm And Ardui , Internet Of Things Explorer , Field Interface And Protocol Simulation Kit , List Of The Machineries , Solar Power Lab , Solar Pv Module Analyzer , Wireless Communication Modules For Interfacing With Microcontrollers A) Rfid Card Reader B) Finger Print C) Zigbee D) Gps E) Gsm F) Bluetooth G) Wifi , Sensors For Smart Environment Application , Sensors For Smart Parking , Sensors For Smart Water & Waste Water Management And Monitoring , Weather Monitoring System , Smart Solar Street Lighting Training Platform , Iot Based Smart Streetlight System , Smart Transportation Monitoring System , Sensors For Smart Building , Iot Data Acquisition Systems And Protocol Converters , Iot Edge Computing Device , Cloud Based Iot Scada , D. Shop Floor Furniture And Materials - For 2 (1+1) Units No Additional Items Are Required. , Instructor’S Table , Instructor’S Chair , Metal Rack , Lockers With 16 Drawers Standard Size , Steel Almirah , Interactive Smart Board With Projector , Fire Extinguisher , A. Trainees Tool Kit , Steel Rule , Hand Gloves , Safety Shoes , Helmet , B. Tools, Instruments And General Shop Outfit , “V” Block , “V” Block , Micrometer Outside , Vernier Caliper , Micrometer Inside , Metal L , Metal L , Angle Plate , Spirit Level , File Warding , File Knife Edge , File Cut Saw , File Feather Edge , File Triangular , File Round , File Square , File Square , File Triangular , File Flat , File Flat , File Flat , File Swiss Type , File Half Round , File Half Round , File Round , File Hand , Card File. , Oil Stone , Pliers Combination , Blow Lamp , Spanner , Spanner Adjustable , Box Spanner , Glass Magnifying , Clamp Toolmaker , Clamp “C” , Clamp “C” , Scraper Flat , Scraper Triangular , Scraper Half Round , Chisel , Chisel , Chisel , Motorized +Tenn Saw , Hand Hammer , Hacksaw , Mallets Wooden , V-Block, Files, Mallets, Screwdrivers, Chisels, Etc. , Hand Drilling Machine , Metal Saw , Straight Grinder Heavy Duty With Attachments , Professional Air Blower , Jig Saw Portable , Hammer Drill Wired , Hand Held Sander / Polisher , Digital Dial Torque Wrench , Lifting Tackle/Sling , Impact Wrench , Laser Light Pen , Surface Plate , Digital Screw Pitch Gauge , Laser Distance Measurement Instrument , Palm Scale , Allen Screwdriver Wrench Tool , Universal Quick Adjustable Multi-Function Wrench Spanner , Double Ended Wrench Hex Socket Spanner , C. General Machinery / Software Installations (Automobile Bom) , Car Lift -4 Ton , 2 Wheeler Bike Or Scooter Assembly Set , Transmission / Gearbox Demo Kit , Cooling System Components Arranged On A Stand With Electric Motor , Exhaust System , Mini Commercial Vehicle Chassis Structure , Rear Axel , Suspension System-Front And Rear On Stand , Steering Wheel And Tyre Systems Assembly On Stand , Disc 7 Drum Brake Systems On Stand (Working Model) , Engine And Transmission Systems On Stand (Working Model) , Hvac Demo Kit , Electronic Ignition System Of An Automobile 4 Wheeler , Demonstration Board Of Working Model Mpfi System With Motorized Control , Instruction Kit For Charging System , Instruction Kit For Starting System , Lighting And Wiring System Mock Layout , System Set Up And Integration With Design. , Electric Vehicle , Electric Vehicle Kit Chassis (In Sets) , Multimeter Digital , Ammeter Able To Read Upto 300 A , Continuity Tester , Tyre Pressure Gauge , Measuring Tape , Electrical Soldering Iron , A. Trainees Tool Kit , Steel Rule , Engineer’S Square , Bevel Straight Edge , Centre Punch , Dot Punch , File Flat Bastard , File Flat 2Nd Cut , File Flat Safe Edge , File Triangular Rough , Hammer , Scriber , Vernier Caliper , Micrometer (Outside) , Safety Goggles (Personal Protective Equipment) , Screw Driver Electrician , Screw Driver , Long Nose Plier , Combination Plier , Diagonal Cutter , Screw Driver Philips , Tweezers , Knife , Wire Stripper , Neon Tester , Scissors , Soldering Iron , Bread Board , B: Tools And Equipments: , Caliper Outside , V-Block , Divider – 150 Mm , Screw Driver , Circlip Plier (Inside And Outside) Each , Centre Gauge , Oil Can , Oil Gun And Grease Gun Each , File Flat Smooth , File Flat Smooth , File Half Round Bastard , File Half Round Smooth , File Triangular Smooth , File Round Bastard , File Square Smooth , Knife Edge File , Needle File Assorted (12 Nos.) , File Card (Spattle) , Scraper Flat , Hammer Ball Peen , Hammer Cross Peen , Chisel Cold Flat , Chisel Cross Cut , Chisel Half Round , Chisel Diamond Point , Scribing Block , Cast Iron Surface Plate , Granite Surface Plate , Tap Extractor , Screw Extractor , Hand Taps And Dies , Bench Vice , Machine Reamer , Machine Tap Set , Twist Drill , Twist Drill , Taper Shank Drills , D.E Spanners , Letter Punch , Number Punch , Parallel Block Standard Sets , Allen Key Metric , Centre Drills , Parallel Hand Reamer , Star Dresser , Diamond Dresser With Holder , Surface Gauge , Angle Plate-Adjustable , Micrometer –Inside – Outside , Vernier Caliper With 0.02Mm Least Count , Digital Vernier Caliper , Digital Micrometer( Inside, Outside And Depth ) , Height Gauge , Vernier Bevel Protractor , Sine Bar And Sine Centre Each , Sprit Level , Slip Gauge Set ( Std ) , Magnetic Stand , Dial Test Indicator , Dial Test Indicator , Bore Gauge , Straight Edge-Single Beveled , Tool Maker’S Clamp , C – Clamp- , Bearing Puller , Ammeter , Ammeter , Voltmeter , Pf Meter , Phase Sequence Meter , Digital Multi Meter , Energy Meter, Single / Three Phase , Clamp On Meter , Ammeter Portable Type , Test Lamp , Tong-Tester , Line Tester , Batter Tester , Electrician Tool Kit , Rechargeable Battery , Pressure Transducers Panel Board To Demonstrate Pressure Gauge, Load Cell, Bourdon Tube, Capacitive Transducers. , Flow Transducers Panel Board To Demonstrate Flow Nozzle, Vane Anemometer, Rota Meter. , Temperature Transducers Panel Board To Demonstrate Bimetallic Strip, Rtd, Thermocouple, Thermistor. , Level Transducers Panel Board To Demonstrate Capacitive And Float Switch. , Insulated Screw Diver , Insulated Combination Cutting Plier , Small Screw Driver , C. Tools & Equipment Of Electrical & Sensors , I) Electrical , Digital Multimeter , Variable Resistance Box, Resistors , 9V Dc Battery With Cap , Dual Power Supply , Solder Iron, Solder Lead, Pcb Board (Groove Board), Solder Wick , Inductor , Relay, Led , Function Generator , Bread Board , Synchronous Motor, Capacitor For Synchronous Motor , Power Chord, Connecting Probes, Single Strand & Multi Strand Wires , Ii) Senors , Power Supply , Sensor Kit , D. Mechatronics Lab Outfit , Discrete Component Tester Trainer Kit , Analog Circuit Trainer Kit , Soldering And De Soldering Station , Power Electronic Trainer , Ac Squirrel Cage Induction Motor , Dc Motor Trainer Board. , Auto Transformer , C.R.O , 50 M Hz , Digital And Analog Ic Tester , Digital Tachometer , Signal Generator , Dc Power Supply Unit , Digital Earth Tester , Firefighting Equipment , Linear Ic Trainer Kit , Ac / Dc Motor Speed Control Trainer Kit , Optical Transducer Trainer Kit. , Simple Servomotor Trainer Kit. , Simple Stepper Motor Trainer Kit , Linear Scale Setup For Positional Accuracy Check , A/D And D/A Trainer Kit , Ups , Stabilizer Trainer Kit , Ac Drive , Dc Drive , Digital Circuits Trainer Kit. , 8051 Microcontroller Trainer Board With Led, Switches, Buzzer, Dc Motor And Stepper Motor Interfacing Circuits. , Plc With Io Simulation Panel And Programming Software With Plc Application Module , Ethernet To Profibus Converter , Hmi , Personal Computers , Operating System (Windows Latest Version) , Portable Hard Disk.(1 Tb) , Ms-Office , Rj45,Bnc,D-Shell, Edge Connector Crimping Tool , Megger , Encoder Trainer Kit , Panel Wiring Work Bench , Protection Devices Trainer Board. , Limit Switch, Pressure Switch, Micro Switch, Float Switch, Foot Switch , Application Trainer Kit Of Proximity Sensor, Float Switch, And Reed Switch , Lvdt Trainer Kit. , Actuators Application Trainer(Servo, Stepper Motor, And Solenoid) , Simple Servomotor Trainer Kit. , Simple Stepper Motor Trainer Kit. , Piezoelectric Transducer/Actuator Trainer Kit. , Pneumatic Control Trainer Kit With Required Pneumatic Components. , Hydraulic Control Trainer Kit With Required Hydraulic Components. , Electro-Pneumatic Control Trainer Kit Using Plc With Required Components. , Electro-Hydraulic Control Trainer Kit Using Plc With Required Components. , Linear Scale Setup For Positional Accuracy Check , Plc Based Conveyor System With Pick And Place And Sorting Of Objects (Pneumatic And Hydraulic) , Cut Section Models Of Pneumatic And Hydraulic Motors ,Pumps , Electrical Simulator Software , Electronic Simulator Software , Hydraulics And Pneumatics Simulator Software , E. General Shop Outfit , Sensitive Drilling Machine , Pillar/Column Type Drilling Machine , Power Hacksaw Machine , Double Ended Pedestal Grinder , Ss And Sc Centre Lathe (All Geared) With Minimum Specification As: , Shearing Machine (Lever Type) Hand Operated Complete , Universal Milling Machine , Horizontal And Vertical Milling Machine , Hydraulic Surface Grinding Machine , Universal Cylindrical Grinding Machine , Cnc Turn Centre , Cnc Vertical Machining Centre , Drafting /Autocad Software , Mechanical Parametric Design /Creo (Proe) Software , Simulation Software
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Jharkhand View Result →
45.
Health and Family Welfare #10220033 Price Bid
Supply Installation Of Machinery/ Equipment, Medical Gad Pipeline Work And Other Essential Items. , List Of Machine And Equipment , Vertical Blinds Providing And Fixing White, Semi-Transparent, Roller Blinds/ Vertical Blind 100 Mm, All Complete, With All Fixing Mechanisms, In Specified Color/Texture/Screen, As Per Attached List, All Complete With Installation& Testing , Dirty Linen Trolley • Heavy Steel Frame Mounted On Four 100 Mm Heavy • Duty Pu Swivel Castors; Two With Brakes. • Two Multipurpose Shelves With One Top Tray With Three Sides Safety Rails. • Provided With One Canvas Bag. • Size: 18 L X 18 W (Shelves) X 35 H + 18 L X 18 W (Canvas Bag). • Finish: Pre-Treated & Epoxy Powder Coated. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Floor Cleaning Trolley • Trolley Having 3 Bin • Capacity Of Each Bucket 25 Liter • Long Handle For Easy Handling. • With A Utility Bin And Mop Holder. • The Frame Of The Trolley Must Be Of Stainless Steel , Waste Bucket-Ss Small For Each Bed • Perforated Dustbin Without Lid • Material: Ss • Capacity :6 Liter • Size: 7 Inch X 10 Inch • Certification- Iso 13485:2016, Iso 14001 , Mayo Trolley • Specially Designed Instrument Trolley For Cross Over The Table. • Height Adjustable Manually Through Knob. • Complete Stainless-Steel Structure With Fixed Stainless • Steel Instrument Tray With Three Sides Safety Rails. • Mounted On Four 100 Mm Heavy Duty Moulded Pu Castors; Two With Brakes. • Size: 36 L X 24 W X 32-48 Height Adjustable. • Finish: Well-Polished Stainless Steel. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Refrigirator • Direct-Cool Refrigerator; 235Litres • Energy Rating: 5 Star • Warranty: 1 Year On Product, 10 Years On Compressor • Smart Inverter Compressor • The Revolutionary Smart Connect Technology In Lg Direct Cool Refrigerator Helps You Connect Your Refrigerator To Home Inverter In Case Of Power Cuts • Moist ‘N’ Fresh Is An Innovative Lattice-Patterned Box Cover Which Maintains The Moisture At The Optimal Level • Spill Proof Toughened Glass Shelves • Stabilizer Free 90V To 310V , Water Cooler Providing And Fixing 150 Litre/ Hr. Cooling And Storage Capacity, Fully Stainless Steel Electric Storage Type Water Cooler ( Blue Star Model No. Sdlx 15150 Or Equivalent) With Inlet Hose Connection Inbuilt Float Valve. 2 Nos. Outlet Faucet, Drain Tray With Waste And Pipe Up To Floor Trap Heavy Compressor And Wire Up To Socket, 3 Pin Plug Etc Complete In All Respect. , Track System • Strong Aluminum Track With Whit Powder Coated Finish • Curtain Of Polyster Fabrics Water Repellent And Stain Retardent • Curtain Size : 4 X 7 Feet • With All Other Accessories To Cover Each Bed , Iv Tree System • Heavy Duty 5 Bag Holder • Heavy Duty Self Locking Wheeled Trolleys • Five Point Telescopic Carrier Tree • Made Of Stainless Steel Ss304 And Aluminium With White Powder Coatint On It & Hook Are Of Ss304 • Strong Aluminum Track With Whit Powder Coated Finish • Track Suspended At Cubicle Track Height. • With All Other Accessories For Each Bed , Medical Gas Pipeline System Certification-Iso 9170-1:2008, Iso 10524-1:2006, Iso 7396-1:2016, Iso 5359:2014, Iec 60601-1-8:2006, Ce, Iso 80601-2-13:2022, Iso 15002:2008, Iso 21969:2009. , Fully Oxygen Mainfold (Without Cylinders) • Supply, Installation, Testing And Commissioning Of Fully Oxygen Manifold 8+8 , Fully Automatic Oxygen Control Panel For Main Fold • Supply, Installation Testing And Commissioning Of Fully Automatic Oxygen Control System, As Per Htm/ Iso7396/ Nfpa-99 Standard And Ce Certified Under Class Ii Medical Directive 93/42/Eec From Notified Body Or Ul/Atl Listed , Oxygen Emergency Mainfold System (Without Cylinders) • Supply, Installation, Testing And Commissioning Of Emergency Oxygen Supply System 2+2 , Oxygen Flow Meter With Humidifier Bottle • Supply Installation, Testing And Commissioning Of Oxygen Flow Meter With Humidifier Bottle 0-15Litres, And Cemarked Under Medical Directive 93/42/Eec , Gas Outlet For Oxygen • Supply, Installation, Testing And Commissioning Of Gas Outlet Points With Probe For Oxygen, Nitrous Oxide, Air, & Vacuum As Per Technical Specification As Per Htm/ Iso 7396 Standard And Ce Certified Under Class Ii , High Pressure Tubes Color Coded • Supply Installation Testing And Commissioning Of High Pressure Tubes Duly Colour Coded For Oxygen , Nitrous Oxide Compressed Air And Vacuum As Per Technical Specification And As Per Htm/ Iso 7396/ Nfpa-99 Standardand Ce Marked. , Medical Grade Copper Pipe Line • Supply,Installation Testing Commissioning Of Medical Gradecopper Piping Bsen : 13348 Lloyds Certified , 42Mm Odx1.2Mm Thick , 28Mmodx 0.9Mm Thick , 22Mmodx 0.9Mm Thick , 15Mm Odx0.9Mm Thick , 12Mm Odx0.7Mm Thick , Zonal Valve Box • Supply, Installation, Testing And Commissioning Of Zonevalves Boxesas Per Technical Specification. The Isolation Valves Used For The Shall Be Degreased For Oxygen Use 1 Gas Services , Medical Gas Alarm Panel • Supply, Installation, Testing And Commissioning Of Medical Gas Alarm Panel As Per Tender Specificationsas Per Htm/ Iso 7396/ Nfpa-99 Standard And Ce Certified Under Class Iimedical Directive 93/42/Eec From Notified Body Or Ul/ Atl Listed. , Master Alarm Panel , Area Alarm Panel , Line Isolation Valves • Isolation Valve , Degreased For Oxygen Use As Per Htm/ Iso 7396/Nfpa-99 Standardand Ce Certified Under Class Ii Medical Directive 93/42/Eec From Notified Body Or Ul/Atl Listed , 42Mm , 28Mm , 22Mm , 15Mm , 12Mm , Bio Medical Waste Trolley • Three Compartment Waste Segregation System. • Stainless Steel Trolley On Castors. •Foot Operating System For Opening Of Lid. •Bins Can Be Interchanged As And When Required. • For Bin Sizes 30 Ltrs , Bio Medical Colored Bin • Washable / Autoclavable • Lateral And Central Handles Tested For Twice The Max Weight. • Solidity & Resistance Against Shock At Both Low And High Temp. • High Penetration Resistance. • The Bins Comply Un And Nfx Standards Of Safety. • Bin Size 30 Ltrs , Bio Medical Colored Bags • Biodegreadable •Environment Friendly •Chlorine Free •Meets All Bmw Disposal Norms • Size As For 30 Ltrs Bin , Oxygen Concentrators • Flow Rate: 0-5/Min/0-10L/Min • Purity: 93+3% • Outlet Pressure: 0.04-0.07 • Sound Level: <- 50Db • Power:Ac230v, 50Hz (Ac220v/110+-10%, 50/60+-1Hz Are Available) • Power Consumption: <-480W • Lcd Display : Switch Times, Operating Pressure, Present Working Time, Accumulating Time, Presenting Time From 10Mins To 40 Hours • Alarm : Power Failure Alarm, High & Low Pressure Alarm • Net Weight : 25Kgs • Size (Mm):365X375x600 • Certification- Iso 13485, Ce , Fingure Tip Pulse Oximeter • Display Type : Led Display • Spo2 Measurement Range: 35-99% • Pulse Rate Measurement Range: 30-240 Bpm • Accuracy : +-1 Bpm • Operating Temperature : 0 Deg C – 40 Deg C • Product Dimension: 30X65x40mm • Certification- Ce, Iso13485 , Defibrillator D-Fab • Display: 7” Colour Tft • Display Area: 150Mmx 90Mm • Dimension: 14280 X W 330 Xd220mm (Max) Without Paddle • Alarm : 24 Hrs Graphical And Tabular Trend Of Ecg, Spo2, Nibp Esco2 Defib (External Paddles) • Operating Mode : Manual • Waveform: Biphasic Truncated Exponential • Energy : 2 To 200 Joules In 12 Steps Selection Heart Rate • Range: 10-250 Bpm • Accuracy : +- 2 Bpm • Resolution:1 Bpm • Alarm Limit Setting: 10-250 (Step Of 1) Ecg • Frequency Response : 0.5 Hz To 35 Hz • Lead Selection :Lead I,Ii And Iii • Gain Setting:0.5 1.0 And 2.0 • Cmrr :> 90 Db • Sweep Speed:12.5, 25.0, 50.0 Mm Sec Power Supply • Input:150-276 Vac, 50 Hz, I O • Battery :12V 4.5Ah, Rechargeable, (Sealed Lead Acid) • Back-Up Time: 3 Hours Min, On Full Charge In Ecg Mode 70-100 Shoeof 150 Joules Delive(Full Charge) • Power Consumption : 30 Watts (Max.) In Ecg Mode Aed Mode • Wave Form : Biphasic Truncated Exponential • Aed Shock Series:Energy Level 200J Environmental • Operating Temp : -5 Degree Celsius To +50 Degree Celsius • Humidity: Up To 95 % Non-Condensing • Certification- Iso 13485, Ce , Suction Apparatus – Foot • Portable And Lightweight Design For Easy Transport & Use In Various Settings. • Operates Using A Foot Pedal Instead Of Electricity, Making It Suitable For Use In Locations Without Access To Power Sources. • Can Generate Sufficient Suction Pressure For Medical Procedures Such As Wound Care, Tracheostomy Care & Airway Clearance. • Easy To Clean & Maintain, With Minimal Parts & Components That Require Servicing. • Durable Construction To Withstand Repeated Use In Clinical Environments. • Adjustable Suction Levels To Accommodate Different Patient Needs & Procedures. • Compatible With A Variety Of Suction Canisters And Tubing For Versatility In Use. • Cost-Effective Alternative To Electric Suction Machines, Particularly In Resource-Limited Settings. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Ecg Machine Features • 7 Inch Tft, Touch Screen, Led Back Light • Digital Information Technology And Signal Processing Solution, Digital Filter •Patient Management, Name Age And Id. Detail Analysis Report. •Built In Lithium Rechargeable Battery, Wide Thermal Printing System. • Usb And Lan Socket. • Memory: Built-In Memory Or Mini Sd Memory Card. Stores More Than 1000 Pieces Of Archive • Auto-Measurement, Auto-Analysis, And Auto-Interpretation. Technical Parameters • Lead: Standard 12 Leads • Patient Leak Current : < 10Ua • Input Impedance: >= 50M • Frequency Response: 0.05- 150 Hz(-3Db) • Time Constant : >3.28 • Cmrr: > 100Db • Dimension Of Recording Paper: 110Mmx20mtr • Paper Speed: 25Mm/S, 50Mm/S • Sensitivity Choice: 5, 10.20Mm/Mv • Measurement Parameters : Hr, P-R Interval, P-Qrs Duration, Q-T Duration Interval, Q-Tc, P Axis, Qrs Axis, R(V5), S(V1), R(V5)+S(V1) • Product Safety Type: Class I, Cf, Defibrillation, Pacing Protection. • Enduring Polarization Voltage: +/-300,Mv • Nosie Level: < 15Uvp-P • Dimension: 130Mm(L)+74Mm(W)+25Mm(H) • Net Weight : 2.3Kg • Certification- Iso 13485, Ce , Gulucometer • Assay Method- Electrochemistry. • Coding- Auto Coding. No Coding For Easy To Use. • Enzyme Compatibility - Gdh-Fad. • Test Time- 5 Seconds. • Sample Volume- 0.5 Ml. • Sample Type- Whole-Blood, Capillary, Venous, Neonatal. • Reference Type- Plasma Reference. • Memory- 500 Test With Date & Time. • Test Range- 10 To 600Mg/Dl. • Power- 3V Battery Cr 2032. • Universal Check Strips- Should Be Available With Every Meter. • Certification- Ec, Gmp, Iso 9001 (Nabcb) • Customer Care And Service Engineer Availability Is Mandatory. , Gluco Strip • Enzyme- Gdh-Fad. • Manual Coding Requirement- No. • Number Of Strips Packed In Each Container- 50*2 • Certification- Usfda, Iso15197:2015,Eu- Ce, Iso 13485:2016 • Electrode- Gold Layer. • Hct Range- 0 To 70%. • Strips Self Life Months – 24. After Opening Till Expiry Date (Print On Container). • Availability Of Test Report From Central Gov/Nabh/Ilac Accredited Lab. • Control Solution Should Be Available For Sample Testing, Service If Required. • Certification- Ec, Gmp, Iso 9001 (Nabcb) , Lancet • .Fine 30Gauge, Tri-Bevel Tip For Virtually Painless Sampling. • . Consistent Depth Penetration. • .Universal Design Should Be Fit For Most Lancing Device. • . Length - 1.2Mm Width -0.32Mm • .Gamma Radiation Sterilized For Hygiene. • Certification- Ce , Iso13485 , Ambu Bag Adult • Silicon Adult Resuscition Set With Ballow Capacity 1000Ml • Oxygen Reservoir Bag 2600Ml • Disposable O2 Tubing 2 Mtr • Silicon Mask – 2 Nos • In Zip Pouch • Certification- Ce, Iso13485 , Oxygen Cylinder (D Type) With Trolley • Cylinder Water Capacity : 46.7 Liter • Cylinder Oxygen Capacity : 7000 Liter • Weight Of Cylinder: 51 Kg (Approx) • Height Of Cylinder With Valve: 1445 Mm (Approx) • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Wheel Chair • Folding Wheel Chair With Fixed Arm And Foldable Footrest • Chrome Plated Ms Frame. • Superior Quality Wheels • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Weighing Scale Digital • Unit : Kg/Lb • Screen: 74X2.9Cm • Material : Tempered Glass + Abs Plastic • Battery:2Xaaa Batteries • Color :Customized Color • Pattern Type :Silk Print • Thickness Glass:6Mm • Glass Angle :Right Angle • Certification- Ce, Iso13485 , Clinical Thermometers (Digital) • Takes 60 Seconds To Measure Body Temperature. • Can Be Used In Oral Cavity, Rectal, Under The Armpit. • Easy To Read Lcd Display - Toggle To F And C • Beep Sound - Accuracy +- 2 Degree F • Range Of Measurement-89.6 Deg F To 109.2 Deg F • Certification- Ce, Iso13485 , Bp Appapratus (Digital) • Applicable Arm Circumference: 32Cm – 36Cm • Measurement Method : Oscillometric Method • Display Method : Lcd Digital Display • Measurement Range:Pressure 0 Mmhg – 280 Mmhg (0 Kpa -37.3 Kpa) Pulse : 40 Beats/Min -195 Beats/Min) • Accuracy : Pressure : +- 3Mmhg (+-0.4 Kpa) Pulse: Allowable Error +-5% • Power Supply : 4 Aaa Batteries (Dc 6V) • Storage & Transport Environment:Temperature -20 Deg C-55 Deg C • Normal Working Environment:Temperature -5 Deg C -40 Degc • Dimension (Approx.): 120Mm X 110Mm X65mm (L*W*H) • Components Included:Monitor, Arm Cuff, Storage Bag, User • Manual (Warranty Page) • Inflation/Deflation : Automatic • Screen Size/Type: 7.5Cm, 3 Colour Backlit & Pvc Pane • Certification- Ce, Iso13485 , Stethoscope • High Automatic Sensitivity • Soft Sealing Ear Knobs • Two Side Chest Piece • Quality Tubing • Imported Diaphragm • Certification- Ce, Iso13485 , Nebulizer • Power:230V Ac,50 Hz • Maximum Power :75W • Medication Capacity : 5Ml • Particle Size:0.4 To 8 Um • Mmad :4Um • On Time:30 Minutes • Sound Level:70 Dba (1 Meter) • Nebulization Rate:0.2 Ml/Min Or Above • Compressor Pressure Range:28 Psi • Operating Pressure Range:8 To 16 Psi • Compressor Air Output :10Lpm • Operating Temperature Range: 0 To 40 Deg C • Operating Humidity Range: 10 To 75 % Rh • Storage Humidity Range :90 % Rh (Max) • Certification- Ce, Iso13485 , Syringe Destroyer With Needle Cutter • High Temperature Incarnation Of Used Needles To Ensure Proper Disposal And Prevent Needle Reuse. • Easy To Use & Operate With Simple On/Off Switch. • Compact And Portable Design For Convenient Use In Medical Settings. • Built-In Safety Features To Prevent Accidental Burns Or Injuries. • Energy Efficient Operation For Cost Savings And Environmental Sustainability. • Durable Metal Body Construction For Long Lasting Use And Stability. • Sharp Cutting Blade For Precise And Efficient Syringe Cutting. • Compact And Lightweight Design For Easy Handling And Storage. • Easy To Assemble And Disassemble For Cleaning And Maintenance. • Cost Effective Solution For Safe Disposal Of Used Syringes In Healthcare Facilities. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Patient Trolley – Ms • Overall Size : 210L X 56W X 81H Cms • Frame Work Of Mild Steel, • Adjustable Back Rest. • Collapsible Safety Side Railings. • Cylinder Cage. • Removable Stretcher Top. • Pre Treated And Epoxy Powder Coated Finish • Wire Mesh Stretcher Platform. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Equipment Trolley • Strong And Precise Stainless-Steel Frame Made Of Rectangular S.S. Pipes Fixed With Six S.S. Shelves Fitted With S.S. Side Safety Rails On Three Sides Of Each Shelf. • Space Between Five Shelves Can Be Adjustable By One Inch Or Two Inches Or Shelves Can Be Detached As Per Space Required For Different Makes Of Laparoscopy/Endoscopy Equipments. • One Drawer Provided Under The Base Made Of Both Side Laminated Wooden Board With Large Stainless-Steel Handle. • Fitted With Electric Socket Strip Of Eleven Modular Sockets On The Rear Side Of Trolley. • Provided With Detachable S.S. Cylinder Cage At The Rear Side Of Trolley. • Trolley Moveable On Four 125 Mm Heavy Duty Moulded Pu Swivel Castors; Two With Brakes. • Finish: Well-Polished Stainless Steel. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Crash Cart • Crash Cart For Hospital Made With Stainless Steel, Completely Rust-Free Design. •6 Polystyrene Lockable Storage Drawers With Multi Colour Bins. •Available With Castors (Two Casters With Break) •Dimensions – 960Mm(L)X450mm(W)X1580mm(H) •The Inbuilt Oxygen Cylinder Holder And Inbuilt I.V Stand. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Patient Monitor • 12.1 Inch High Resolution Color Tft Lcd Screen. • Thinner And Lighter Design, Convenient And Portable For User, Pace-Maker Detection. • Freeze Instant Waveform For Real Time S-T Segment Analysis. • Real Time S-T Segment Analysis, Pace-Maker Detection. • 3-Level Audio Visual Alarming. • Efficient Resistance To Interference Of Defibrillator And Hf Knife. • Lasting Working Capacity With Built-In Rechargeable Lithium Battery. • 400 Groups Of Nibp List, 6000 Seconds Ecg Waveform Recall, 60 Alarm Events Recall, 7-Day Trend Chart In Storage. • Wire/Wireless Central Monitoring System Applicable To Icu/Ccu/Or. Standard Configuration: • Spo2, Pr/Hr, Nibp, Ecg, Resp, 2-Temp. • Certification- Iso 13485, Ce , Over Bed Table With Adjustable Mechanism • Abs Moulded Top Fitted On Heavy Steel Frame With Heavy Base Made Of • Crca Pipe Frame Mounted On Four 50 Mm Swivel Castors. •Fitted With Stainless Steel Pillar Height Adjustable With Pneumatic Pump • Operated By Clip Provided On Back Side Of Pillar. •Size: 32 L X 16 W X 32-42 H. •Finish: Pre-Treated & Epoxy Powder Coated Base With Stainless Steel Pillar. • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001 , Sanitizer Machine • Product Type : Fogger Machine • Voltage : 220V • Phase : Single Phase • Wattage : 1000 Watt • Rpm : 2000 Rpm • Discharge Capacity : 5-25 Ltr/Hour • Liquid Particle Size : 15-50Um • Spray Distance : 15M • Tank Capacity : 4 Litre • Cable Requirement : 3 Core Flexible Cable • Certification- Iso 13485:2016, Iso 14001:2015, Gmp, Iso 50001, Iso 45001
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Jharkhand View Result →
46.
Public Administrative Department #10204042 Price Bid
Tender For Strengthening Of Bt Road At Ward No 13 West Car Street Burial Ground In Eruvadi Town Panchayat.; 1 Construction of Granular Sub-base by providing close graded material,mixing in a machanical plant at OMC,carriage of mixed material to work site,spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to acheive the desired density,Complete as per clause 401. 2 Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.,complete as per clause 406 of MORTH 3 Providing and layingPriming coat over WMM surface using 7Kg ofEmulsion Bitumen (SS1) for 10 Sq.m for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinary, fule and all other incidental chrages etc., complte as for clause 502 ofMORTH Rev-5. 4 Providing and laying Tack Coat over WMM Surface using 2.50 Kg of Bitumen Emulsion (RS1)per10 sqm for prparatory to another bituminous construction over it, including cost of material,labour charges, rentals for machinery,fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5 5 Providing and laying Tack Coat over existing B.T Surface using 2.00 Kg of Bitumen Emulsion (RS1)per10 sqm for prparatory to another bituminous construction over it, including cost of material,labour charges, rentals for machinery,fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5 6 Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm,0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9m paver finisher, Vibratory/Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 7 Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 45.27 kgs of VG30( 60/70)bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30t on capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9mpaver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTHRev-5
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
Tamil Nadu View Result →
47.
Drinking Water Supply and Sanitation #10184949 Price Bid
Tender For Repair And Renovation Work Of Hanuman Sagar Gagardu Tehsil And District Dudu - Repair and renovation work of Hanuman Sagar Gagardu Tehsil and District Dudu Sl. No. Item Description 1 Cuttingandclearance of jungle, bushes, shrubs Ankra/Ipomoea, Juliflora typna etc. on canal and bunds in dry/moist/slushy conditions including disposal as per instructions of the Engineer-in-charge. Cost of wood has been deducted from rates and thus will be property of contractor after cutting. Thick 2 Excavation including loading, unloading, disposal and dressing of excavated earth within initial lead of 50m and lift up to 1.5m including dressing of excavated area and dewatering wherever required complete in all respect Hard / dense soil 3 Earth work in rough (borrow area) excavation for embankments in hard soil, morrum or highly weathered strata dry or moist, including laying in20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted by vibro compactor, vibro sheep foot roller, sheep foot roller/pneumatic tyred roller to obtain dry density of at least 98% of Standard Proctor s density with initial lift of 1.5m (Excluding charges for compaction and watering) including loading and un-loading wherever required complete in all respect.With lead beyond 250 m and up to 750 m (Km)5.17.1 Deduct in item no 16 (a) to (d) above if Standard Proctor s density to be achived is at least 95 4 (i) Compaction of earth or highly weathered strataBy mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor / vibro sheep foot compactor required as per site condition to obtain dry density of.at least 95% of Standard Proctor s density 5 Watering of earth including cost of carriage of water when source of water is up to 1 Km 6 Beyond 1 Km but up to 5 Km extra per Km 7 Earth work in rough (borrow area) excavation for embankments in hard soil, morrum or highly weathered strata dry or moist, including laying in20 cm layers (before compaction) and breaking of clods, sorting of grass, pebbles etc. and dressing when compacted by vibro compactor, vibro sheep foot roller, sheep foot roller/pneumatic tyred roller to obtain dry density of at least 98% of Standard Proctor s density with initial lift of 1.5m (Excluding charges for compaction and watering) including loading and un-loading wherever required complete in all respect.With lead beyond 250 m and up to 750 m (Km) 8 Add extra for each subsequentlead of 500m or part there of beyond 0.500 Km and up to 5 km 9 (ii)Compaction of earth or highly weathered strataBy mechanical equipment such as sheep foot roller/ pneumatic tyred roller/vibro compactor / vibro sheep foot compactor required as per site condition to obtain dry density of. at least 98% of Standard Proctor s density 10 Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:5 11 Random rubble stone masonry (using R. R. stones where 75 % stones to be not less than 15 cm in size in any direction and weighing not less than 23 kg.) for foundation including curing with all leads of all construction materials including curing etc. complete. In cement sand mortar 1:57.8.1 Masonry work in superstructure 12 Plaster in cement sand mortar 1:4 including racking of joints, smooth finishingandcuring etc. complete including all leads of all construction materialsof thickness:20 mm 13 Providing and laying cement concrete coping in (1:2:4) with maximum size of crusher broken aggregate upto 20 mm including shuttering etc. with all leads of material complete in all respect in thickness of: 75 mm 14 Providing and Laying in position of Cement concrete Nominal mix (1:3:6) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3(1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering, shuttering and reinforcement. Well graded crusherbroken stone aggregate of maximum size upto 40 mm 15 Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3(1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering, shuttering and reinforcement. Well graded crusherbroken stone aggregate of maximum size upto 40 mm 16 Providing and Laying in position of Cement concrete Nominal mix (1:2:4) including leads of all construction materials, curing, compaction and finishing with rendering in cement sand mortar 1:3(1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering, shuttering and reinforcement. Well graded crusherbroken stone aggregate of maximum size upto 20 mm 17 Providing and Laying in position of Cement concrete Design mix M-25 including leads of all construction materials, plasticizers (if required), curing, compaction and finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering, shuttering and reinforcement. Well graded crusherbroken stone aggregate of maximum size upto;(For mix design Cement content considered 420 kg/ cum of concrete) 20 mm 18 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarnandneatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 1000mm NP3 19 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarnandneatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 1000mm Labour Charges only 20 Lip cutting and final dressing as per designed section including re-handling and disposal of excavated earth in layers 20 cm on embankments etc. with cost of dewatering wherever required, and complete in all respect 21 Preparation and dressing the sub grade including removal ofirregularities up to 7.5 cm in soil, morrum mixed with pebbles, small boulders and kankarandmurrum forBed 22 Providing and laying cast in situ concrete sleepers 15 cm x 7.5 cm in bed in cement concrete (1:3:6) with maximum size of crusher broken stone aggregate upto 20 mm well graded including all leads of all construction materials including curing, finishingandform work etc. complete as per specification for:In bed 23 Providing and laying cast in situ concrete sleepers 15 cm x 7.5 cm in bed in cement concrete (1:3:6) with maximum size of crusher broken stone aggregate upto 20 mm well graded including all leads of all construction materials including curing, finishingandform work etc. complete as per specification for:In sides 24 Extra charges for water spray by nozzle on sub grade of canal including bed and side slopes before laying plain concrete for lining work. 25 Filling of construction joints with Bitumen based sealing compound, including painting the concrete sleepers below lining and sides of lining panel as per specification provided in IS: 3384-1986 and all leads of all construction materials including cost of sealing compound, complete in all respect. 26 Supplying and laying quarry spalls properly graded but not more than 10cm in size with spreading in required profile including all leadsandlifts 27 Making standard type cement gauge including engraving letters and painting including scaffolding etc. 28 Painting standard type gauge with black, red and white un-washable paints including cost of material 29 Design, Drawing, fabrication, supply, erection, testingand commissioningofVentliners(steel linersforsluice/tunnelorasperrequirementin Dam/irrigationsystem)includingEmbeddedparts consisting of liner plates, anchors, stiffeners, girders, fasteners etc. and any required necessary item, with all accessories for all types of Gates/ sluice channels/ anysectionofwaterresourcesprojects includingcostofallmaterials,machinery, labour, cutting, aligning, anchoring, welding, finishing, cleaning, tools and tackles, applyingtwocoatof zinc rich epoxy primer to give dry film thickness of 705 microns and finish coat (two coats) of solvent lesscoaltarepoxypaintusingairlesssprayto providedryfilmthicknessof150 5micronsper coatthus totaldryfilmthicknessofallcoats, includingprimercoating,shouldnotbelessthan 350 microns., including packingandforwarding, transportation charges complete, as per specifications and approved drawings. 30 Dismantling cement concrete including disposal of material within 50 m lead, inclusive of de-wateringwherever required. 31 Dry boulder filling in required profile with filling of voids etc. complete including all leadandlifts, and well finished surface 32 Side shuttering including propping etc. complete (to achieve finish F 2 for :Retaining wall, counterfort, abutment, wing walls up stream or down- stream slope facings of dams and open faces of construction joints etc. 33 Nominal mix of Plain Cement Concrete well mixed and laid in position using 20% max permissible limit of plums above 160 mm and up to 450mm, including curing and finishing etc including all leads of all construction materials complete in all respect with well graded crusher broken stone aggregate. The plums shall be distributed evenly and shall be not closer than 150 mm from the surface.PCC Nominal Mix 1:2:4 with plum,Max size of Aggregate 20 mm 34 Supplying of M.S. reionforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using. Tor or ribbed bars (IS :1786-1985) 35 Demolishing stone rubble masonry including stacking of usable material and disposal of unuseable material within 50 meters lead inclusive of de-watering wherever required.In cement mortar 36 Extra labour charges for RCC due to obstruction in laying and placing the reinforced cement concrete due to reinforcement. In foundation rafts, beams, columns bases stilling basins, buckets, aprons etc. (non suspended horizontally laid mass concrete) 37 (ii)Removal of slit/soil/earth, sand, pebbles,Malba , debris, rubbish, stone pebblesandobstruction deposited in canal bed up to design line grade and sections having design due to erosion/scour/slips in canal banks/silting with or without bushes and weeds etc. in dry or moist condition from canal bed including dewatering, loading unloading and disposal at suitable place as directed by Engineer in charge with initial lead of 50m. and lift upto 1.5 m with proper dressing on canal bed complete in all respect For depth above 15 cms but upto 30cms havingLined section 38 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarnandneatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 300mm NP3 39 Providing, laying and fixing in position RCC spun or hume pipe with collars (ISI 458-2003) in required size packed in gasket for hume or spun yarnandneatly finished with rich grout of cement mortar 1:3 perfectly air tight including testing of joints. 300 mm Labour Charges only 40 Cutting of construction joint/ longitudinal joint 4 to 6 mm. wideusing mechanical concretee cutter including cost of diamond bit cutting wheel and filling of bitumen sealingcompound in groove including cost of sealing compound. 50 mm depth 41 Providing and laying cast in situ plain cement concrete design mix M-15 grade for lining, using well graded crusher broken aggregate of maximum nominal size 20 mm conforming to IS:383-1970, including proportioning of the ingredients by weigh batching and mixing by mechanical mixer including finishing of concrete lining, cutting of grooves for construction joints, complete as per specification with all leads and lifts of construction material complete for canal bed of thickness. 7.5 cm 42 Providing and laying cast in situ plain cement concrete design mix M-15 grade for lining, using well graded crusher broken aggregate of maximum nominal size 20 mm conforming to IS-383-1970, including proportioning of the ingredients by weigh batching and mixing by mechanical mixer including finishing of concrete lining, cutting of grooves for construction joints, complete as per specification with all leads and lifts of construction material complete for canal side of thickness. 7.5 cm 43 Add extra over items of cement plaster/ cement concrete/cc.lining/cc flooring or RCC for providing and mixing Polypropylene/Polyester fibres as per IS 16481:2022 or latest revision, 6/12 mm long @ 0.25% (125 gram per 50 kg of cement) or in ratio of as specified by manufacturer specification and direction of Engineer in charge with all leads and lifts.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 7
Rajasthan View Result →
48.
Agriculture #10177456 Price Bid
Providing New Tested Machinery To The Farmers Of The State On Subsidy Under Various Farm Mechanization Programmes During The Financial Year 2025-26 , Tractors: , 2Wd (Up To 20 Pto Hp): , 4Wd (Up To 20 Pto Hp) , 2Wd (20-40 Pto Hp) , 4Wd (20-40 Pto Hp) , Balers (Round/ Rectangle) , Hay Rake (6/ 9/ 11-Arms) , Rice Transplanters , Walk Behind Type , Ride On - Riding Type , Power Tiller (8 Bhp & Above) , Self-Propelled Machinery: Agricultural/ Horticultural Machinery , Crop Reaper Cum Binder (3 Wheel/ 4 Wheel) , Power Weeder (Engine Operated Below 2 Bhp) , Power Weeder (Engine Operated 2 Bhp-5 Bhp) , Power Weeder (Engine Operated 5 Bhp-7.5 Bhp) , Pneumatic/ Other Planter , Tea Leaf Harvester (Hand-Held) , Self-Propelled 4 Wheel Tea Leaf Harvester , Post Hole Digger/ Auger - Self Propelled , Brush Cutter (Electric/ Engine Powered) , Crop Reaper (Diesel/ Petrol Engine Operated & Battery Operated) , Attachments/ Equipments For Power Tiller/ Power Weeder/ Tractor (Up To 40 Bhp) , Crop Reaper , Rotavator , Potato Planter/ Digger , Plough (Mb Plough/ Disc Plough) , Cultivator , Seed Cum Fertilizer Drill , Reversible Mould Board Plough (Rmbp) , Maize Sheller , Thresher/ Multicrop Thresher/ Paddy Thresher , Onion Harvester , Pneumatic Vegetable Transplanter , Harvesting And Threshing Equipments: [Operated By Engine/ Electric Motor Below 5 Hp & Above 5 Hp] , Maize Sheller , Thresher/ Multicrop Thresher/ Paddy Thresher , Chaff Cutter (Engine/ Electric Motor/ Tractor Operated) , Manual/ Animal Drawn Implements/ Tools For Sowing And Planting: , Paddy Planter , Seed Cum Fertilizer Drill , Raised Bed Planter , Planter/ Zero-Till Planter , Dibbler , Equipments For Raising Paddy Nursery , Seed Treating Drum , Manual Fertilizer Spreader , Broadcaster , Manual/ Animal Drawn Implements/ Tools For Harvesting And Threshing: , Thresher , Winnowing Fan , Horticulture Hand Tools , Maize Sheller , Chaff Cutter (Up To 3 Feet & Above) , Self-Propelled/ Other Power Driven Horticultural Machinery , Chain Saw , Mango Grader/ Planter , Plant Protection Equipments , Manual Sprayer: Knapsack/ Foot/ Battery Operated Sprayer , Solar Operated Knapsack Sprayer , Powered Knapsack Sprayer/ Power Operated Sprayer (Capacity 8-12 Lts): (=0.75 Hp Engine) , Powered Knapsack Sprayer/ Power Operated Sprayer (Capacity 12-16 Lts): (>0.75 To 1.00 Hp Engine) , Bird Scarer/ Agricanon
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 72
Himachal Pradesh View Result →
49.
Public Administrative Department #10161306 Price Bid
Tender For Special Fund 2025-26 At Improving The Road At Thiruvattar Sarroor In Thiruvattar Town Panchayat; 1 Picking the existing BT surface to 50 mm, deep and replacing the metal fit for reuse, to bring the existing surface to camber including leveling and sectioning as directed by the Departmental officers including labour and hire charges for tools and plants and all other incidental charges etc complete as per standard specifications. as per clause 702 of MORTH Rev-5. 2 Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24 3 Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. 4 Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. 5 Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. 6 Providing, laying, spreading and compacting graded stone aggregates to Wet Mix Macadam for required thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base / Base course on well prepared surface and compacting with vibratory roller to achieve the desired density, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc complete. as per Clause 406 of MORTH Rev-5. 7 Providing and laying Priming coat 7Kg / 10 m² over WMM surface using of SSI Emulsion Bitumen for 10 m² and cost Emulsion Bitumen which will be supplied and procured by the contractor himself at his own cast as per special condition appended including labour charges for preparing the surface for laying the tack coat and for applying the required quantity of bituminous by mechanical sprayer including hire and fuel for all tools and plants employed etc complete. MORTH Specifications 111,112,501,503 & 900. 8 Providing and laying Tack coat 2.50 Kg / 10 m² over Wet Mix Macadam surface using of RS1 Emulsion Bitumen for 10 m² and cost of Emulsion Bitumen which will be supplied and procured by the contractor himself at his own cost as per special condition appended including labour charges for preparing the surface for laying the tack coat and for applying the required quantity of bituminous by mechanical sprayer including hire and fuel for all tools and plants employed etc complete. MORTH Specifications 111,112,501,503 & 900. 9 Providing and laying 50 mm consolidated thick Dense Bituminous Macadam using 0.24 m³ of 26.50-13.20 mm, 0..25 m³ of 13.20-2.36 mm and 0.23 m³ of 2.36 mm & below and with 53.20 Kgs of VG30 / VG40 bitumen for premixing per 10 m² including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc, including labour for attending to paver at site etc, including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler, tipper trucks, Paver Finisher / 9 m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc complete. using CMP Clause 505 MORTH Rev-5. 10 Providing and laying Bituminous Concrete 30 - 40 mm thick using 0.13 m³ of 19.00-9.50 mm, 0.17 m³ of 9.50-2.36 mm and 0.26 m³ of 2.36 and below with 50.30 Kgs of VG 30 / VG 40 bitumen for premixing per 10 m² including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40 mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc, including labour for attending to paver to site etc, including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler, tipper trucks, Paver Finisher / 6 m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc complete. using CMP Clause 507 of MORTH Rev-5. 11 Road marking with hot applied thermoplastic compound with reflectorising glass beads on bituminous surface proving and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 Gms / m² area thickness of 2.5 mm exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level uniform and free from streaks and holes. as per MORT&H specification No.803.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
Tamil Nadu View Result →
50.
Educational and Research Institute #10088358 Price Bid
Supply Of Books , Library Books , Machine Design, T. V. Sundararajamoorthy & N. Shanmuga ,Anuradha Publications, Kumbakonam. , Revised Edition June-2003 , Industrial Motor Control., Stephen Herman ,Cengage Learning , 6Th Edition , Electrical Technology, Edward Hughes ,Addision– Wesley International Student Edition , Latest Edition , Mysql, Paul Dubois ,Addison Wesley , 4Th Edition , No Sql Distilled, Pramod J. Sadalage Martin Fowler ,Addison Wesley , 1St Edition Or Latest Reprint , American Society Of Metals – Hand Book – Volume 4 ( Forming), American Society Of Metals,American Society Of Metals , Latest Edition , Programmable Controller Theory And Implementation, L.A.Bryan E.A.Bryan ,An Industrial Text Company Publication , Latest Edition , Biomedical Instrumentation, M. Arumugam ,Anuradha Publications, Chennai , Latest Edition , Android Apps For Absolute Beginners, Jackson ,Apress , Latest Edition , Computer Installation And Servicing, D.Balasubramanian ,Arasan Ganesan Institute Of Technology , 1993 , Home Refrigeration And Air Conditioning, Audels, Theo. ,Audel & Co. Publisher, New York. - 1998 , 199 Edn.49 , Remote Sensing And Geographical Information System, M.Anji Reddy ,B.S Publications , Latest Edition , The Complete Pc Upgrade And Maintenance, Mark Minasi ,Bpb Publication , 1997 , Exploring Programmable Logic Controller With Applications, Pradeep Kumar Srivastava ,Bpb Publication , Latest Edition , The Complete Pc Upgrade And Maintenance, Mark Minasi ,Bpb Publication , Latest Edition , Advanced Mobile Repairing, Pandit Sanjib ,Bpb Publication , First Edition 2010 , Modern Vcd Video Cd Player Introduction, Servicing And Troubleshooting, Manohar Lotia & Pradeep Nair ,Bpb Publication , Latest Edition , Explosing Programmable Logic Controllers With Application., Pradeep Kumar Srivastava. ,Bpb Publication , Latest Edition , Let Us C, Yeswanth Kanetkar ,Bpb Publication , 16Th Edition , Programmable Logic Controller, Pradeep Kumar & Srivashtava ,Bpb Publication , Latest Edition , Modern Computer Hardware Course, Manahar Lotai, Pradeep Niar, Payal Lotia ,Bpb Publication , Second Revised Edition 2011 , Inside Autocad, D. Raker And H. Rice,Bpb Publication , Latest Edition , Text Book Of Environmental Science And Technology, M.Anji Reddi ,Bs Publications , Latest Edition , Book 1 - General Aspect Of Energy Management And Energy Audit,,Bureau Of Energy Efficiency, New Delhi , Second- 2005 , Book 3 - Energy Efficiency In Electrical Utilities,,Bureau Of Energy Efficiency, New Delhi , Second- 2005 , National Building Code Of India – 2005,,,Bureau Of Indian Standards, New Delhi , Latest Edition , Total Quality Management, Oakiand.J.S.,Butterworth Heinemann Ltd. Oxford , 1989 , The Art Of Electronics, Paul Horowitz ,Cambridge University , 2Nd Edition Press , Performance And Design Of Ac Machine, M.G.Say ,Cbs Publisher & Distributor , Latest Edition , A Text Book Of Soil Mechanics, Dr S B Sehgal ,Cbs Publisher & Distributors , Latest Edition , Building Repair And Maintenance Management, P.S.Gahlot ,Cbs Publisher & Distributors (P) Ltd , Latest Edition , Learning Material Development Project – Nitttr,,Cd Programme On Gps And Gis. , Latest Edition , Introduction To Programmable Logic Controllers, Gary Dunning ,Cengagelearning India Pvt Ltd , Latest Edition , Building Materials, S.C.Rangwala ,Charotar Publishing House , 1982 , Building Construction, S.C.Rangwala ,Charotar Publishing House , Latest Edition , Mechanics Of Structures (Vol Ii), S.B. Junnarkar ,Charotar Publishing House , 22Nd Edition , Highway Engineering, Rangwala ,Charotar Publishing House , 2010 , Railway Engineering, Rangwala ,Charotar Publishing House , 2010 , Bridge Engineering, Rangwala ,Charotar Publishing House , 2009 , Estimating & Costing, Rangawala ,Charotar Publishing House , Latest Edition , Construction Of Structures And Management Of Works, Rangwala.S.C ,Charotar Publishing House , Latest Edition , Machine Design, Pandya & Shah ,Charotar Publishing House , 1995 , Principle Of Geographical Information Systems For Land Resources Assessment, Burrough P.A. (2000) ,Clarendon Press, Oxford. , Latest Edition , Technician’S Guide To Programmable Logic Controllers, Richard A. Cox ,Delmer , Sixth Edition 2011 , Principles Of The Manufacturing Of Composite Materials , Suong V Hoa, ,Des Tech Publication. Inc , Latest Edition , Strength Of Materials, S.Ramamirtham ,Dhanpat Rai , 2003 , A Course In Electrical And Electronics Measurements And Instrumentation., A.K. Sawhney Puneet Sawhney ,Dhanpat Rai , Latest Edition , Estimating & Costing, L.N.Dutta ,Dhanpat Rai , Latest Edition , Thermal Engineering., B.K. Sarkar. ,Dhanpat Rai , 3Rd Edition , Internal Combustion Engines, M.L.Mathur & R.P.Sharma ,Dhanpat Rai , Latest Edition , Mechanical Draughtsmanship,G.L. Tamta, Dhanpat Rai ,Dhanpat Rai , Latest Edition , Engineering Drawing, D.N. Ghose ,Dhanpat Rai , Latest Edition , A Course In Electrical Power, Soni & Gupta ,Dhanpat Rai , Latest Edition , Hydraulics,Fluid Mechanics And Hydraulics Machines, S. Ramamirtham ,Dhanpat Rai , Latest Edition , Modern Electric Traction, H Partab ,Dhanpat Rai , Latest Edition , Mechanical Measurements, A.K.Sawhney-Dhanpat Rai & Sons ,Dhanpat Rai , Latest Edition , Electronic Measurements And Instrumentation, Sanjay Talbar & Akhilesh Upadhyaya ,Dhanpat Rai , 2004 , Electrical And Electronic Measurements And Instrumentation, A.K.Sawheney ,Dhanpat Rai , 1993 , A Coursein Electricalpower, Soni, Gupta ,Dhanpat Rai , Latest Edition , Strength Of Materials, S. Ramamrutham ,Dhanpat Rai , 15 Edn 2004 , Course In Electrical Machine Design, A.K.Sawhney ,Dhanpat Rai , Latest Edition , Electrical Technology, B.L.Theraja ,Division Of Nirja Constructions And Dev Co.(P) Ltd , 1994 , Design Data Book, Psg College Of Technology ,Dpv Printers, Coimbatore , Latest Edition , Suftware Testing Concepts And Tools, Nageshwara Rao Pusulri ,Dreamteach , First Edition , Automotive Mechanics, Joseph Heitner ,East West Press (P) Ltd, New Delhi , Latest Edition , Renewableenergy Sources , Twidell, J.W. And Weir, ,Efn Spon Ltd , Latest Edition , Vehicle And Engine Technology, Heinz Heisler ,Elbs , Latest Edition , Programmable Logic Controller, W. Bolton ,Elsevier India Pvt Ltd , Iv Edition , Principles And Practice Of Town And Country Planning, Lewis B. Keeble ,Estates Gazette, University Of Michigan , 2010 , A Text Book On Building Services, R.Udyakumar ,Eswar Press, Chennai , Latest Edition , Fluid Mechanics, K.L.Kumar ,Eurasia Publshing House - New Delhi , Latest Edition , A Text Book Of Machine Design., R.S. Khurmi & J.K.Gupta ,Eurosia Publishing House - New Delhi ,Edn. 18 , Mechanical Measureme Control, R.V. Jalgaonk ,Everes T Publishing House, Pune , Latest Edition , The Cell Phone Handbook, P.J. Stetz And Penelope Stetz ,Findtech Ltd , Second Edition , Pc Repair And Maintenance, Joel Rosenthal ,Fire Wall Media, New Delhi , First Edition 2007 Reprint :2012 , Software Engineering, Bharat Bhusan Agarwal, Sumit Prakash Tayal ,Fire Wall Media, New Delhi , Second Edition 2008 , The Laptop Repair Workbook: An Introduction To Troubleshooting And Repairing Laptop Computers, Morris Rosenthal ,Foner Books , First Edition 2008 , The Laptop Repair Workbook: An Introduction To Troubleshooting And Repairing Laptop Computers, Morris Rosenthal ,Foner Books , First Edition 2008 , Multimedia Technology & Applications,, David Hillman ,Galgotia Publications Pvt Ltd. , Latest Reprint , Repair And Seismic Strengthening Of Buildings - Guidelines, Is:13935 - 2002,,Guidelines, Is:13935 , 2002 , Automotive Mechanics, William H.Crouse And Donald .L. Anglin ,Hill Publishing Company Ltd, New Delhi , Latest Edition , Die Design Fundamentals, Paquin.J.R,,Industrial Press Inc , Latest Edition , Digital And Analog Communication System, B.P.Lathi .Zhi Ding ,International Oxford University Press , 4Th Edition , Mysql Bible, Steve Suehring ,John Wiley & Sons , 2002, Latest Reprint , Modern Production / Operations Management, E.S. Buffa And R.K. Sarin ,John Wiley & Sons , Latest Edition , Remote Sensing And Image Interpretation, Lillesand, T.M. & Kiefer R.W. (1998) ,John Wiley & Sons , Latest Edition , Ground Water Hydrology, David Keith Todd ,John Wiley & Sons , Latest Edition , Digital Communications, Simon Haykin ,John Wiley India Edition , Latest Edition , Cad/Cam, Mikell P.Groover ,Jr.Prentice Hall Of India Pvt., Ltd. , Latest Edition , A Course In Electrical Power, J.B. Gupta ,Kaison Publishing House , Reprint 2004 , Civil Estimating, Costing And Valuation,,Kalson Publishing House , Latest Edition , Machine Drawing, P.S. Gill ,Katsan Publishing House , Latest Edition , Analysis Of Structures – Vol 1, Vazirani & Ratwani ,Khanna Publishers , Latest Edition , Quantity Surveying & Valuation, N.A.Shaw ,Khanna Publishers , Latest Edition , Water Supply And Sanitary Engineering, S.K.Garg ,Khanna Publishers , Latest Edition , Hydrology And Water Resources Engineering, Santhosh Kumar Gar ,Khanna Publishers , Latest Edition , Fluid Mechanics, Prof. S. Nagarathinam - ,Khanna Publishers , Latest Edition , Workshop Technology ,Raghuwanshi,Khanna Publishers , Latest Edition , Production Technology,Nai Sarak ,Khanna Publishers ,Edn. Xii , Thermal Engineering, P.Lballaney ,Khanna Publishers , 24Th Edition , Production Technology, Jain & Gupta ,Khanna Publishers , Latest Edition , Automobile Engineering, G.B.S.Narang ,Khanna Publishers , Latest Edition , Thermal Engineering, P.L Ballaney,Khanna Publishers , 24Th Edition , Applied Thermodynamics, Domkundwar And C.Pkothandaraman ,Khanna Publishers ,2Nd Edition , Non Conventional Energy Sources, G.D. Rai,Khanna Publishers , 1999 , Industrial Engineering And Management, O.P. Khanna ,Khanna Publishers , Latest Edition , Refrigeration And Air Conditioning, P.L . Ballaney ,Khanna Publishers , Latest Edition , Electric Circuit Theory, Dr.M.Arumugam Dr.N.Premkumaran ,Khanna Publishers , Latest Edition , Electrical Power, S.L Uppal ,Khanna Publishers , Latest Edition , Electrical Wiring, Estimating And Costing, Dr.S.L.Uppal G.C. Garg ,Khanna Publishers , Sixth- 2011 , Electric Circuit Theory, M. Arumugam, N. Premkumaran ,Khanna Publishers , 1997 , Power Electronics, P.S.Bimbhra, ,Khanna Publishers , 5Th Edition 1994 , Integrated Circuits, K.R. Botkar ,Khanna Publishers , Latest Edition , Satellite Communication, D.C. Agarwal ,Khanna Publishers , Third Edition , A Monograph On Electronic S Design Principles,, N.C.Goyel, R.K.Khetan, ,Khanna Publishers , Second Edition , Operating Systems, Ekta Walia ,Khanna Publishers , 2Nd Edition , Data Structures, Rs Salaria ,Khanna Publishers , 2016 , Electric Power, Sl Uppal ,Khanna Publishers , Latest Edition , Testing, Commissioning, Operation And Maintenance Of Electrical Equipments, S.Rao ,Khanna Publishers , Sixth Edition, 2010 , Electrical Estimation And Costing, Surjit Singh ,Khanna Publishers , Latest Edition , Power Electronics, Dr.P.S.Bimbhra ,Khanna Publishers , Fourth Edition, 2011. , Mechanical & Indtrial Measuments, R.K.Jain ,Khanna Publishers , Latest Edition , Construction Management, Sanga Reddy. S ,Kumaran Publications, Coimbatore , Latest Edition , Fluid Mechanics, R.K. Bansal ,Lakshmi Publications , Latest Edition , Total Quality Management,, V.Jayakumar ,Lakshmi Publications. , (Reprint 2005) , Thermal Enggi., R.K . Rajput,Laxmi Publications Pvt Ltd , 8Th Edition , Fluid Mechanics And Hydraulic Machines, R. K. Bansal ,Laxmi Publications Pvt Ltd , Latest Edition , Engineering Mechanics, R K Bansa ,Laxmi Publications Pvt.Ltd. , Latest Edition , Building Construction, Dr. B.C. Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Building Construction, Ashokkumar Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Surveying Volume I, Punmia.B.C. Ashok K.Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , 2011 , Theory Of Structures, B.C. Punmia, Ashok Jain & Arun Jain ,Laxmi Publications Pvt.Ltd. , 9Th Edition , Surveying Volume I, Punmia.B.C, Ashok K.Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Surveying Volume Ii & Iii, Punmia.B.C, Ashok Jain & Arun K. Jain ,Laxmi Publications Pvt.Ltd. , Latest Edition , Limit State Design Of Reinforced Concrete, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , R C C Designs, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Environmental Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Waste Water Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Soil Mechanics And Foundation Engineering, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Project Planning And Control With Pert And Cpm, B C Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Buildingconstruction, Dr.B.C.Punmia ,Laxmi Publications Pvt.Ltd. , Latest Edition , Strength Of Materials, R.K. Bansal ,Laxmi Publications Pvt.Ltd. , 3Rd Edition, 2010. , Engineering Mechanics, R.K. Bansal ,Laxmi Publications Pvt.Ltd. , 2Nd Edition, 2007 , Thermal Engg, R.K .Rajput ,Laxmi Publications Pvt Ltd , 8Th Edition , Industrial Robotics – Technology, Programming And Applications, P.Groover ,Mc Graw Hill , 2001 , Mobile Cellular Communications, W.C.Y. Lee ,Mc Graw Hill , Second Edition , Electronic Principles And Applications, Charles.A.Schuler ,Mc Graw Hill , 3Rd Edition, 1989 , Geotechnical Earthquake Engineering Hand Book, Robert W.Day ,Mc Graw Hill , Latest Edition , Measurement Systems Application And Design, Ernest O. Doebelin ,Mc Graw Hill , 2004 , Transducers And Instrumentation, D.V.S.Murty ,Mc Graw Hill , 2004 , Digital Electronics, Roger L.Tokheim Macmillan ,Mc Graw Hill , Latest Edition , Digital Integrated Electronics, Taub & Schlling ,Mc Graw Hill , Latest Edition , Optical Fibre Communication, Gerd Keiser ,Mc Graw Hill , Third Edition , Digital Electronics, Roger L.Tokheim Macmillan ,Mc Graw Hill , 1994 , Computer Control Of Manufacturing Systems, Yoram Koren ,Mc Graw Hill , Latest Edition , Engineering Economics And Management, T.R. Banga & S.C. Sharma ,Mc Graw Hill , Editiion 2 – 2001 , Database System Concepts, Silberschatz A. And Korth H ,Mcgraw Hill Education (India) Pvt Limited , 6Th Edition , A Global Perspective, Heinz Weihrich, Harold Koontz ,Mcgraw Hill International Edition ,10Th Edition , Hessentials Of Management’, Herald Koontz And Heinz Weihrich ,Mcgraw Hill Publishing Company , Latest Edition , Power Electronics, Md Singh, Kb Dhanchandaniata ,Mcgraw Hill Publishing Company , Seventeenth Reprint 2005 , Operating Systems, A Concept-Based Approach, Dhananjay M. Dhamdhere ,Mcgraw Hill, Indian Edition , 3Rd Edition , Elements Of Photogrammetry, Wolf Paul (1998) ,Mcgraw Hill, New Delhi , Latest Edition , Manufacturing Process, Begeman . ,Mcgraw Hill, New Delhi1981. , 5Th Edition , Introduction To Environmental Engineering, Mackenzie, L. Davis And A. David, Cornwell. ,Mcgrawhill , Latest Edition , Environmental Engineering, Peary, Rowe And Tchobanoglous ,Mcgrawhill , Latest Edition , Fundamentals Of Digital Logic With Vhdl Design, Stephen Brown And Vranesic ,Mcgrawhill , Latest Edition , Programmable Logic Handbook: Pld, Cpld, And Fpga, Ashok K.Sharma ,Mcgraw-Hill , Latest Edition , Javascript: The Complete Reference, Powell, Thomas ,Mc-Grawhill , 3Rd Edition , Html & Css: The Complete Reference, Thomas Powell ,Mc-Grawhill , 5Th Edition , Jsp: The Complete Reference, Phil Hanna ,Mc-Grawhill , 2Nd Edition , Robotics For Engineers, Yoram Koren ,Mcgraw-Hill Book Co., , 1992 , “Basic Die Making, Eugene Ostergaard.D ,Mcgraw-Hill Book Company , Latest Edition , Advanced Die Making, Eugene Ostergaard.D ,Mcgraw-Hill Book Company , Latest Edition , Hand Book Of Die Design, Ivana Suchy ,Mcgraw-Hill Book Company , Latest Edition , Tool Engineers Hand Book, Astme ,Mcgraw-Hill Book Company , Latest Edition , Robotics Control, Sensing, Vision And Intelligence, Fu.K.S.Gonzalz.R.C., And Lee C.S.G ,Mcgraw-Hill Book Company , 1987 , Audio And Video System – Principles, Maintenance And Troubleshooting , R.Gupta. ,Mcgraw-Hill Book Company ,Second Edition , Computer Organization, V.Carl Hamacher, Zvonko G.Vransic, Safgat G.Zaky ,Mcgraw-Hill Book Company , 5Th Edition , Elements Of Workshop Technology Volume I & Ii, Hajra Chowdry & Bhattacharaya,Media Promoters & Publishers , Latest Edition , Operation And Maintenance Of Electrical Equipment – Volume I & Ii, B.V.S.Rao ,Media Promoters & Publishers , 1St Edition, 1St Reprint 2011 , Elements Of Workshop Technology- Vol. I & Ii,Hajra Choudry & Battacharya ,Media Promoters & Publishers , Latest Edition , Hydraulic Machines, Jagadishlal, ,Metropolitan Book Company New Delhi , Latest Edition , Fluid Mechanics And Hydraulic Machines, Dr. Jagadish Lal ,Metropolitan Book Company New Delhi , Latest Edition , Mechanical Measurements &Control, D.S.Kumar ,Metropolitan Book Company New Delhi , Latest Edition , Introducing Microsoft .Net, David S.Platt ,Microsoft Press , 3Rd Edition , Computer Organization And Design, David A. Patterson And John L. Hennessey ,Morgan Kauffman / Elsevier , 5Th Edition , Complete Knowledge In C, Sukhendu Dey, Debobrata Dutta ,Narosa Publishing House, New Delhi , Reprint 2013 Or Latest Reprint , Software Testing, K.Mustafa And R.A.Khan ,Narosa Publishing House, New Delhi , Reprint 2009 , Software Quality, R.A. Khan, K.Mustafa And Si ,Narosa Publishing House, New Delhi , Reprint 2008 , Building Materials, S.K.Dugga ,New Age International (P) Ltd , 2003 , Reinforced Concrete Design, N Krishnaraju ,New Age International (P) Ltd , Latest Edition , Design Of R C C And Structural Elements ( Rcc Vol I), S S Bhavikatti, ,New Age International (P) Ltd , Latest Edition , G I S Basics, Shahab Fazal ,New Age International (P) Ltd , Latest Edition , Irrigation And Water Resources Engineering, G.L.Asawa ,New Age International (P) Ltd , Latest Edition , Basic Geotechnical Earthquake Engineering,,New Age International (P) Ltd , Latest Edition , Maintenance Of Buildings, A C Panchdhar ,New Age International (P) Ltd , Latest Edition , Engineeringdrawing And Graphics + Autoca, K.Venugopal, ,New Age International (P) Ltd , Latest Edition , Control Of Machines, S.K Bhattacharya ,New Age International (P) Ltd , Second Edition- Reprint 2010 , Quality Manageme, Narayana.V And Sreeniva N.S ,New Age International (P) Ltd , 1996 , Cad/Cam/Cim, R.Radhakrishnan, S.Subramanian ,New Age International (P) Ltd , Latest Edition , Electrical Power System, Clwadhawa ,New Age International (P) Ltd , Fourth Edition, 2009 , Hvdc Power Transmission System & Technology, Kr. Padiyar ,New Age International (P) Ltd , Reprint 2005 , Digital Protection – Protective Relaying From Electromechanical To Microprocessor, Lp Singh ,New Age International (P) Ltd , Second Edition 1997 , Electrical Design Estimating And Costing, K.B.Raina& S.K.Battacharya ,New Age International (P) Ltd , Reprint - 2011 , Control Of Electrical Machines., S.K. Bhattacharya ,New Age International (P) Ltd , Latest Edition , Power Electronics, Mohammed H.Rashid ,New Age International (P) Ltd , Third Edition,2004 , Programming In C, D.Ravichandran ,New Age International (P) Ltd , 1St Edition 1996, Latest Reprint , Linear Integrated Circuits, D.Roychoudhury & Shail.B. Jain ,New Age International (P) Ltd , 2Nd Edition, 2004. , Modern Television Practice– Transmission, Reception, Applications, R.R.Gulati,New Age International (P) Ltd , 5Th Edition , Monochrome & Color Tv , R.R.Gulati ,New Age International (P) Ltd , Latest Edition , Computer Fundamentals Architecture And Organization, B. Ram ,New Age International (P) Ltd , 5Th Edition , Principles Of Data Structures Using C And C++, Vinu V.Das ,New Age International (P) Ltd , Latest Reprint , Practical Scada For Industry, David Bailey Edwin Wright ,Newness , Latest Edition , Programmable Logic Controllers, W. Bolton ,Newness , Latest Edition , Practical C Programming, Steve Oualline ,O’Reilly , 3Rd Edition , Programming Php, Rasmus Lerdorf And Kevin Tatroe ,O’Reilly Publications , 3Rd Edition , Java, A Beginners Guide, Herbert Schildt ,Oracle Press , 6Th Edition , Pc Hardware In A Nutshell, Robert Bruce Thompson. ,Oreilly Media , Third Indian Reprint 2008. , Principles Of Electrical Machine Design, S.K.Sen ,Oxford & Ibh , Latest Edition , Principles Of Gis For Land Resources Assessment, Burrough P A ,Oxford Publication , Latest Edition , Programming In C, Reema Thereja ,Oxford University Press , 2Nd Edition , Digital Electronics, G.K.Kharate ,Oxford University Press , 2010 , Software Engineering Concepts And Application, Subhasjit Dattun ,Oxford University Press , 2010 , Software Engineering Fundamentals, Ali Behforooz And Fredick J Hudson ,Oxford University Press , 2005 , Reinforced Cement Concrete, Mallick And Rangasamy ,Oxford & Ibh , Latest Edition , Digital Communications Fundamentals And Applications, Bernard Sklar & Pabitra Kumar Ray ,Pearson Education , Latest Edition , Advanced Surveying, Sathesh Gopi, R.Sathikumar & N.Madhu ,Pearson Education , Latest Edition , 8051 Microcontroller And Embedded Systems Using Assembly And C , Mazidi,Mazidi And D.Mackinlay,,Pearson Education , Latest Edition , Programmable Logic Controllers – Programming Methods And Applications, John R Hackworth And Fredrick D.Hackworth ,Pearson Education , Latest Edition , Principles Of Wireless Networks– A Unified Approach, Kaveh Pahlavan And Prashant Krishnamoorthy ,Pearson Education , 2002 , Electronic Communications Systems - Fundamentals Through Advanced, Wayne Tomasi ,Pearson Education , Fifth Edition , Digital Design, M.Morris Mano Michael D Ciletti ,Pearson Education , Latest Edition , 8051 Microcontrollers, Mazidi And D.Mackinlay ,Pearson Education , Latest Edition , Principles Of Wireless Networks – A Unified Approach, Kaveh Pahlavan And Prashant Krishnamurty ,Pearson Education , Latest Edition , Wireless Communications Principles And Practice, Theodore S. Rappaport ,Pearson Education , Latest Edition , Mobile Communications, Jochen Schiller ,Pearson Education , Second Edition , Mobile Cellular Communication, Gottapu Sasibhushana Rao ,Pearson Education , Latest Edition , Operating System, Internal And Design Principles, William Stallings ,Pearson Education , 9Th Edition , Operating Systems, Deitel And Deitel ,Pearson Education , 3Rd Edition , Computer Organization And Architecture Designing For Performance, William Stallings ,Pearson Education , 10Thedition , Network Security Essentials, William Stallings ,Pearson Education , 5Th Edition , Cryptography And Network Security, William Stallings ,Pearson Education , 6Th Edition , Computer Networks, Andrew S.Tanenbaum ,Pearson Education , 5Th Edition , Web Development And Design Foundations With Html5, Terry Felke-Morris ,Pearson Education , 8Th Edition , Software Engineering, Ian Sommerville ,Pearson Education , Sixth Edition , Software Testing Principles And Practices, Srnivasan Desikan, Gopalswamy Ramesh ,Pearson Education , First Edition , Mobile Communications, Jochen Schiller ,Pearson Education , Latest Edition , Fundamental Of Multimedia, Ze- Nian Li And M.S.Drew. ,Pearson Education , 2Nd Edition , Multimedia Computing, Communication And Applications, Ralf Steinmetz And Klara Nahrstedt ,Pearson Education , Latest Reprint , Multimedia Systems, John F. Koegel Buford ,Pearson Education , Latest Reprint , Total Quality Management, Date H.Besterfiled ,Pearson Education Asia. , Latest Edition , Automation, Production Systems, And Computer-Integrated Manufacturing, Mikell P. Groover ,Pearson Education Asia. , Latest Edition , 8051 Microcontroller And Embedded Systems Using Assembly And C, Mazidi,Mazidi And D.Mackinlay ,Pearson Education Low Price Edition. , Latest Edition , Design Of Steel Structures, K.S.Sai Ram ,Pearson-Porling Kindersley Pvt Ltd , Latest Edition , 8051 Microcontroller, Kenneth Ayala ,Penram International Publishing (India) Pvt Ltd , Latest Edition , Plc And Industrial Automation An Introduction, Madhuchhanda Mitraand Samarjit Sen Gupta ,Penram International Publishing (India) Pvt Ltd , Latest Edition , Industrial Energy Conservation-, D. A. Ray- ,Pergaman Press , Latest Edition , Electronics Devices And Circuit Theory, Boyestad & Nashelsky ,Phi , Latest Edition , Electronic Devices & Circuits An Introduction, Allen Mottershed,Phi , Latest Edition , Computer Graphics Multimedia And Animation,, Malay K. Pakhira ,Phi , 2Nd Edition , Principles Of Digital Electronics, K.Meena ,Phi , 2011 , Operational Amplifiers And Linear Integrated Circuits, Robert F. Coughlin Frederick F. Driscoll ,Phi , 1992 , Op. Amp & Linear Integrated Circuits, Ramakant. A. Gayakwad ,Phi , 1992 , Digital Electronics- An Introduction To Theory And Practice, William H.Gothmann ,Phi , 1998 , Transducers And Instrumentation, Dvs Murty ,Phi , 2009 , Measurement And Instrumentation, Arun. K ,Phi , 2010 , Sensor And Transducers, D. Patranabis ,Phi , 2011 , Elements Of Engineering Mechanics, Sanchayan Mukherjee ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Surveying, Mimi Das Saikia, B Mohan Das & M Mohan Das ,Phi Learning Pvt. Ltd., New Delhi. , 2010 , Fundamentals Of Surveying, S. K. Roy ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Structural Analysis, Madhan Mohan Dass, ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Structural Analysis, Madhan Mohan Dass ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Surveying, Mimi Das Saikia, B Mohan Das & M Mohan Das ,Phi Learning Pvt. Ltd., New Delhi. , Edition 2010 , Fundamentals Of Surveying, S. K. Roy ,Phi Learning Pvt. Ltd., New Delhi. , Edition 2010 , Limit State Design Of Reinforced Concrete, P C Varghese ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Limit State Design In Structural Steel, .M.R.Shiyekar ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Principles Of Environmental Science And Engineering,, P.Venugopala Rao ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Irrigation And Water Power Engineering, Madan Mohan Das&Mimi Das Saikia ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Limit State Design In Structural Steel, M.R.Shiyekar ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Buildingconstruction, P.C.Varghese ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Energy Engineering And Management, Amlan Chakrabarti ,Phi Learning Pvt. Ltd., New Delhi. , Latest Edition , Power Electronics, M.S.Jamil Asghar ,Phi Learning Pvt. Ltd., New Delhi. , Eastern Economy Edition, 2010 , Principles Of Digital Electronics, K.Meena ,Phi Learning Pvt. Ltd., New Delhi. , 2009 , Operating System, Principles & Design, Pabitra Pal Chaudhuri ,Phi Learning Pvt. Ltd., New Delhi. , 1St Edition , Computer Organization & Architecture, Rajaraman ,Phi Learning Pvt. Ltd., New Delhi. , Latest Reprint , Fundamentals Of Software Engineering, Rajib Mall ,Phi Learning Pvt. Ltd., New Delhi. , 28Th Printing – August 2011 , A Textbook On C, E.Karthikeyan ,Phi Publication, New Delhi , 2008 , Electronics Devices And Circuit Theory , Boyestad & Nashelsky ,Phi Publication, New Delhi , 2009 , Electronicsdevices And Circuits, Allen Mottershed ,Phi Publication, New Delhi , Latest Edition , Modern Electronic Instrumentation And Measurement Techniques, Albert D.Helfrick And Willam David Cooper ,Phi Publication, New Delhi , 1996 , A Text Book On C, E.Karthikeyan ,Phi Publication, New Delhi , 2008 , Power Electronics, M.H.Rashid ,Phi Publication, New Delhi , 3Rd Edition-2005 , Industrial Electronics And Control, Biswanath Paul ,Phi Publication, New Delhi , 2Nd Edition -2010 , Programmable Logic Controllers, Frank D.Petruzela ,Phi Publication, New Delhi , 2Nd Edition- 1998 , Programmable Logic Controllers Principles And Applications, John W. Webb. Ronald A. Reis ,Phi Publication, New Delhi , Latest Edition , Networks Lines And Fields, John D.Ryder ,Phi Publication, New Delhi , Latest Edition , Electronic Communication, Dennis Roddy And John Colen ,Phi Publication, New Delhi , Latest Edition , Principles Of Digital Electronics, K.Meena ,Phi Publication, New Delhi , Latest Edition , Digital Electronics, William H.Gothmann ,Phi Publication, New Delhi , Latest Edition , Digital Electronics – An Introduction To Theory And Practice, William H.Gothmann ,Phi Publication, New Delhi , Latest Edition , Operational Amplifiers And Linear Integrated Circuits, Ramakant A Gayakwad ,Phi Publication, New Delhi , Latest Edition , Operational Amplifiers And Linear Integrated Circuits, Robert F.Coughlin And Frederick F.Driscoll ,Phi Publication, New Delhi , Latest Edition , Microcontrollers, Principles And Applications, Ajit Pal ,Phi Publication, New Delhi , Latest Edition , Vhdl Primer, Bhasker J ,Phi Publication, New Delhi , Latest Edition , Digital Electronics With Pld Integration, Nigel P. Cook ,Phi Publication, New Delhi , Latest Edition , Digital Logic Simulation And Cpld Programming With Vhdl, Steve Waterman ,Phi Publication, New Delhi , Latest Edition , Data And Computer Communications, William Stallings ,Phi Publication, New Delhi , Latest Edition , Computer Networks , Andrew S.Tanenbaum ,Phi Publication, New Delhi , Latest Edition , Wireless Digital Communications, Kamilo Feher ,Phi Publication, New Delhi , Latest Edition , Wireless Communications And Networks, William Stallings ,Phi Publication, New Delhi , Latest Edition , Irrigation Water Management, Dilip Kumar Majumdar ,Phi Publication, New Delhi , Latest Edition , Multimedia Systems Design., Prabhat K.Andleigh, Kiran Thakra ,Phi Publication, New Delhi , Latest Edition , Performance And Design Of Ac Machines, M.G.Say ,Pitman Publishing Ltd , Latest Edition , Principles Of Management, M.Govindarajan And S.Natarajan ,Prentice-Hall Of India (P) Ltd , Latest Edition , Modern Electronic Instrumentation And Measurement Techniques, Albert D. Helfrick William David Cooper ,Prentice-Hall Of India (P) Ltd , Latest Edition , Building Materials, P.C.Varghese ,Prentice-Hall Of India (P) Ltd , 2011 , Building Constructions, P.C.Varghese ,Prentice-Hall Of India (P) Ltd , 2011 , Geographic Information Systems, Lo & Yeung (2005) ,Prentice-Hall Of India (P) Ltd , Latest Edition , Geographic Information Systems & Environmental Modelling, Clarke Parks & Crane (2005) ,Prentice-Hall Of India (P) Ltd , Latest Edition , Foundation Design, Wayne C.Teng ,Prentice-Hall Of India (P) Ltd , Latest Edition , Operations Research, H.A.Taha ,Prentice-Hall Of India (P) Ltd , Latest Edition , Total Quality Management – An Introductory Text, Paul James ,Prentice-Hall Of India (P) Ltd , Latest Edition , Electronic Device And Circuits- An Introduction, Allen Mottershed,Prentice-Hall Of India (P) Ltd , Latest Edition , Techniques Of Press Working Sheet Metal, Donald F. Eary. & Edward A. Reed ,Prentice-Hall Of India (P) Ltd , Latest Edition , Essentials Of Management, Joseph L.Massie ,Prentice-Hall Of India (P) Ltd , 4Th Edition , Elements Of Electrical Engineering, Maria Louis ,Prentice-Hall Of India (P) Ltd , Latest Edition , Digital Electronics, William H.Gothmann ,Prentice-Hall Of India (P) Ltd , Latest Edition , Programmable Logic Controllers – Principle And Applications, John W. Webb ,Prentice-Hall Of India (P) Ltd , Latest Edition , Computer Networks, Andrew S.Tanenbaum ,Prentice-Hall Of India (P) Ltd , 2002 , Data And Computer Communications, William Stallings ,Prentice-Hall Of India (P) Ltd , Eighth Edition 2007 , Computer System Architecture, M.Morris Mano ,Prentice-Hall Of India (P) Ltd , 3Rd Edition , Data Structures A Programming Approach With C, Dharmender Singh Kushwaha And Arun Kumar Misra ,Prentice-Hall Of India (P) Ltd , 2012, Latest Reprint , Classic Data Structures, Debasis Samanta ,Prentice-Hall Of India (P) Ltd , 2Nd Edition , The Internet, Douglas E.Comer ,Prentice-Hall Of India (P) Ltd , 4Th Edition , Introduction To Biomedical Instrumentation, Mandeep Singh,Prentice-Hall Of India (P) Ltd , Latest Edition , Iso 9001, Brain Rethry, Brain Rethry ,Productivity And Quality Publishing Pvt. Ltd. , 1993 , Surveying And Levelling Part 1 & 2, Kanetkar.T.P. & S.V.Kulkarni ,Puna Vidyarthi Griha, Prakashan , 2008 , Surveying And Levelling Part 1 & 2, Kanetkar.T.P. & S.V.Kulkarni ,Puna Vidyarthi Griha, Prakashan , 23Rd Edition , Limit State Theory And Design Of Reinforced Concrete, S.R.Karve And V.L.Shah ,Puna Vidyarthi Griha, Prakashan , 5Th Edition , A Course In Electrical And Electronics Measurements And Instrumentation, A.K. Sawhney ,Puneet Sawhney Dhanpat Rai & Co (P) Ltd. , Latest Edition , Upgrading And Repairing Laptops, Scott Mueller ,Que Publication , Latest Edition , A Text Book Of Fluid Mechanics And Hydraulic Machines,By, R. K Rajput And S.Chand ,R. K Rajput And S.Chand & Co, New Delhi , Latest Edition , Training Manual On Iso 9001 : 2000 & Tqm, Girdhar J.Gyani ,Raj Publishing House , Latest Edition , Electrical Machine Design, A.Naoor Kani ,Rba Publications , Latest Edition , A Course In Electrical Engineering , B.L.Theraja ,S.Chand & Company Ltd, New Delhi ,Reprint 2006 , A Text Book Of Transportation Engineering, S P Chandola ,S.Chand & Company Ltd, New Delhi , Latest Edition , Strength Of Materials, R.S.Khurmi ,S.Chand & Company Ltd, New Delhi , Latest Edition , Strength Of Materials, R. S. Khurmi, S.Chand,S.Chand & Company Ltd, New Delhi , Latest Edition , Production Technology , P. C. Sharma ,S.Chand & Company Ltd, New Delhi ,Edn. X , Thermal Engineerin, , R.S. Khurmi, J.K Gupta ,S.Chand & Company Ltd, New Delhi , 18Th Edition , A Text Book Of Hydraulics, Fluid Mechanics And Hydraulic Machines,R.S. Khurmi ,S.Chand & Company Ltd, New Delhi ,Edn.18 , Thermal Engineering, R.S. Khurmi And J.K. Gupta ,S.Chand & Company Ltd, New Delhi , 18Th Edition , The Automobile, Harbans Singh Reyat, S.Chand,S.Chand & Company Ltd, New Delhi , Latest Edition , Non Conventional Energy Sources And Utilisation , R.K. Rajput - S.Chand ,S.Chand & Company Ltd, New Delhi , 2012 , A Text Book Of Electrical Technology Volume Ii, B.L. Theraja ,S.Chand & Company Ltd, New Delhi , Latest Edition , A Text Book Of Electrical Technology -Volume Ii, B.L. Theraja ,S.Chand & Company Ltd, New Delhi , Latest Edition , Principles Of Power System, V.K.Metha ,S.Chand & Company Ltd, New Delhi , 4Th Edition Reprint 2007 , Electronic Measurements And Instrumentation, R.K.Rajput ,S.Chand & Company Ltd, New Delhi , 3Rd Edition 2009 , Computer Concepts And C, Dr.S.S.Khandare ,S.Chand & Company Ltd, New Delhi , 1St Edition 2010, Latest Reprint , Electrical Technology Vol I And Ii, B.L.Theraja ,S.Chand & Company Ltd, New Delhi , Mutiple Colour Edition,2012 , Principles Of Electronics, V.K.Mehta ,S.Chand & Company Ltd, New Delhi , Second Edition , Electronics And Instrumentation, Dr.S.K.Battachariya Dr. Renu Vig ,S.K. Kataria & Sons, New Delhi , Latest Edition , Principles Of Electrical Machine Design, R.K.Agarwal ,S.K. Kataria & Sons, New Delhi , Latest Edition , Environmental Engineering And Management, Dr.Suresh K.Dhameja- ,S.K. Kataria & Sons, New Delhi , Latest Edition , Soil Mechanics & Foundation Engineering, V N S Murthy ,Sai Kripa Technical Consultants , Latest Edition , Digital Communications, Dr.K.N.Hari Bhat Dr.D.Ganesh Rao ,Sanguine Technical Publisher , Latest Edition , Energy Resource Management, Kirpal Singh Jogi- Sarup And Sons ,Sarup And Sons , Latest Edition , A Course In Electrical And Electronic Measurement And Instrumentation, Umesh Sinha ,Satya Prakashan, New Delhi , Latest Edition , Electrical And Electronics Measurements And Instrumentation, Umesh Sinha ,Satyaprakashan Tech , 1992 , Theory And Problems Of Machine Design, Holowenko, Laughlin ,Schaum’S Outline Series. , Latest Edition , Data Structures With C, Seymour Lipschutz ,Schaums Outlines, Tmh , Latest Reprint , Microprocessor And Microcontroller, R.Theagarajan ,Sci Tech Publication , Latest Edition , Microprocessor And Microcontroller, R.Theagarajan ,Sci Tech Publication, Chennai. , Latest Edition , Limit State Design Of Concrete Structures, Dr.S.Ramachandra ,Scientific Publishers , Latest Edition , Murach’S Mysql, Joel Murach ,Shroff / Murach , 2012, Latest Reprint , Fundamentals Of Tool Design, Dr.John G.Nee ,Society Of Manufacturing Engineers. , Latest Edition , Electrical Machine Design, C.Eswarlal ,Sonaversity , Latest Edition , A Concise Introduction To Software Engineering, Pankaj Jalote ,Springer, Latest Edition , Design Of Electrical Machine, Mittle V.N ,Standard Book – House , Latest Edition , Fluid Mechanics, P.N. Modi & S.M. Sethi ,Standard Publishers & Distributors, New Delhi , Latest Edition , Water Supply And Sanitary Engineering Vol I & Ii, Gurcharan Singh ,Standard Publishers & Distributors, New Delhi , Latest Edition , Hydraulics, Fluid Mechanics And Hydraulics Machines, K.R. Arora ,Standard Publishers & Distributors, New Delhi , Latest Edition , Automobile Engineering Vol- 1, Vol – 2,Kirpal Singh ,Standard Publishers & Distributors, New Delhi , Latest Edition , Learning Material Development Project,,Taramani, Chennai, Cd Programme On Gps And Gis , Latest Edition , Principles Of Transportation & Highway Engineering, G V Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Environmental Engineering, N.N. Basak ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Environmental Engineering, A.Kamala,D.L.Kanthrao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Engineering Hydrology, K.Subramanya ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Production And Operations Management, S.N. Chary ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Essentials Of Management, Koontz &Weihrich ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Business Correspondence & Report Writing, R.C. Sharma And K.Mohan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , How To Prepare For Group Discussion & Interview (With Audio Cassette), Prasad ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Construction Management And Planning, Sengupta.B, &H.Guha ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Computer Applications In Construction, Boyd.C. & Paulson Jr ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Fluid Mechanics And Machinery, B C S Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Geotechnical Earthquakes Engineering Hand Book,,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Strength Of Materials, S.S.Rattan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Strength Of Materials,B K Sarkar ,Tata Mcgraw-Hill Publishing Company Ltd , I Edition, 2003 , Production Technology,,Tata Mcgraw-Hill Publishing Company Ltd ,Edn. 18. 2001 , Autocad With Applications, Sham Tickoo,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Applied Thermodynami, Pk Nag ,Tata Mcgraw-Hill Publishing Company Ltd , 2Nd Edition , Production Technology, Hmt, ,Tata Mcgraw-Hill Publishing Company Ltd , Edn. 18 , Manufacturing Process, Myro N Begman ,Tata Mcgraw-Hill Publishing Company Ltd , Edn. 5 , Production Processes, Nitttr, ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Circuits & System- Analog And Digital , Y.N.Bapat ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Applied Thermodynamics, P.K. Nag ,Tata Mcgraw-Hill Publishing Company Ltd , 2Ndedition , Quality Management, Howard Cuitlow ,Tata Mcgraw-Hill Publishing Company Ltd , 1998 , Quality Planning And Analysis, Juran J.M And Frank M.Gryna Jr. ,Tata Mcgraw-Hill Publishing Company Ltd , 1982 , Tool Design, Donaldson ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Non-Conventional Energy Resources ,B.H.Khan ,Tata Mcgraw-Hill Publishing Company Ltd ,2Nd Edn, 2009. , Cad/Cam Principles And Applications, Dr.P.N.Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Cad/Cam, Ibrahim Zeid ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Measurement Systems, E. O. Doebelin ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Robotics And Image Processing, Janakiraman.P.A ,Tata Mcgraw-Hill Publishing Company Ltd , 1995 , Circuits And Networks Analysis And Synthesis., A. Sudhakar Shyammohan S Palli ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electric Circuits, Mahamood Nahvi Joseph A Edminister ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Machines, Nagarath ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Machines, Bhattacharya ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices & Circuits, Salivahanan S, N.Suresh Kumar, A.Vallavaraj,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices & Circuits, Jacob Millman And Halkias ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Optical Fiber Communication, Gerdkeise ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Instrumentation, Hs Kalsi ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Modern Digital Electronics, R.P.Jains ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Principles & Applications, Albert Paul Malvino & Donaldp.Leach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Introduction To Microprocessor, Aditya P Mathur ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Power System Protection And Switchgear, B Ram & Dn Viswakarma ,Tata Mcgraw-Hill Publishing Company Ltd , Reprint 2000 , Programmable Logic Controllers, Frank D.Petruzella ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electrical Power Distribution System, As Pabla ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Utilization Of Electric Power, Nv Suryanarayana ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Troubleshooting, Maintaining And Repairing Pcs, Stephen J Bigelow ,Tata Mcgraw-Hill Publishing Company Ltd , 2004 , Data Communication And Networking, Behrouz A.Forouzan ,Tata Mcgraw-Hill Publishing Company Ltd , 2006 , Computer Networks, Achyut Godbole ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronics Devices And Circuits, Salivahanan S, N.Suresh Kumar, A.Vallavaraj ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition 2016 , Electronic Principles , Malvino ,Tata Mcgraw-Hill Publishing Company Ltd , 2010 , Electronicsdevices And Circuits, Jacobmillmanandhalkias ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition 2010 , Electronic Instrumentation, Kalsi ,Tata Mcgraw-Hill Publishing Company Ltd , 2004 , Programming In Ansi C , E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Programming And Problem Solving Using C, Isrd Group, Lucknow ,Tata Mcgraw-Hill Publishing Company Ltd , 2008 , Electronic Communication Systems, Kennedy ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Tv And Video Engineering, Arvind M.Dhake ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Communication Electronics Principles And Application , Louis E Frenzel ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Principles And Applications, Albert Paul Malvino & Donald P.Leach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Linear Integrated Circuits, Salivahanan & V.S.Kanchana Baskaran ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Electronic Communication Systems, Kennedy – Davis ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Digital Communication, P.Ramakrishna Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Principles Of Communications System, Taub &Schilling ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Computer Installation And Servicing, D.Balasubramanian ,Tata Mcgraw-Hill Publishing Company Ltd , Second Edition 2010 , Troubleshooting, Maintaining And Repairing Pcs, Stephen J.Bigelow ,Tata Mcgraw-Hill Publishing Company Ltd , Fifth Edition , Ibm Pc And Clones, B.Govindrajalu ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Data Communication And Networking, Behrouz A.Forouzan ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Tv And Video Engineering, By A.M.Dhake ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Color Tv, Theory And Practice, S.P.Bali ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Modern Digital Electronics, R.P. Jain ,Tata Mcgraw-Hill Publishing Company Ltd , Third Reprint 2010 , Basic Electricall Engineering, V.N.Mittle ,Tata Mcgraw-Hill Publishing Company Ltd , First Edition , Basic Electrical And Electronics Engineering, R,Muthusubramanian R.Salivajanan ,Tata Mcgraw-Hill Publishing Company Ltd , Seventh Reprint 2011 , Computer Architecture And Organization, John P. Hayes ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Data Communication And Networking, Behrouz A.Forouzen ,Tata Mcgraw-Hill Publishing Company Ltd , 5Th Edition , Computer Communications And Networks, Achyuts.Godbole ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Cryptography And Network Security, Behrouza.Forouzen ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Programming With Java, E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , 5Th Edition , Data Structures And Algorithms, G.A.Vijayalakshm I Pai ,Tata Mcgraw-Hill Publishing Company Ltd , 6Th Reprint Or Latest Reprint , Data Structures Using C, Isrd Group ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Reprint , Programming In C#, E. Balagurusamy ,Tata Mcgraw-Hill Publishing Company Ltd , 3Rd Edition , Applications Of .Net Technology, Isrd Group ,Tata Mcgraw-Hill Publishing Company Ltd , 1St Edition Or Latest Reprint , Cloud Computing A Practical Approach 2008 Edition, Cloud Computing A Practical Approach ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Software Engineering, Stephen Schach ,Tata Mcgraw-Hill Publishing Company Ltd , Eight Reprint 2011 , Mobile Computing, Asoke K Talukder,Hasan Ahmed, Roopa R Yavagal ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Edition , Multimedia: Making It Work., Tay Vaughan ,Tata Mcgraw-Hill Publishing Company Ltd , 8Th Edition , Multimedia Communication Systems: Techniques, Standards, And Networks, K.R. Rao ,Tata Mcgraw-Hill Publishing Company Ltd , Latest Reprint , Principles Of Multimedia, Ranjan Parekh ,Tata Mcgraw-Hill Publishing Company Ltd , 2Nd Edition , The Complete Reference Linux, Richard Peterson ,Tata Mcgraw-Hill Publishing Company Ltd , 6Th Edition , A Text Book Of Engineering Drawing,R.B. Gupta ,Technical India Publications, New Delhi , Latest Edition , Digital Communication, Dr. J.S.Chitode ,Technical Publications – Pune , Latest Edition , Introduction To Plc, Gary Dunning ,Thomson Del Mar Learning , 3Rd Edition , Data Structures Using C – 1000 Problems And Solutions, Sudipta Mukherjee ,Tmgh, New Delhi , 2Nd Reprint Or Latest Reprint , Industrial & Power Electronics, Harish C.Rai ,Umesh Publications , 2017 , Construction Engineering & Management, Seetharaman. S ,Umesh Publications , Latest Edition , Introduction To Earthquake Engineering,,University Of Tokyo Press , Latest Edition , Digital Electronics And Logic Design, Jaydeep Chakravarthy ,University Press, Hyderabad , First Edition2012 , Introduction To Data Structures Using C, Venkatesh N.Baitipuli ,University Science Press, Chennai , 1St Edition, 2009 Or Latest Reprint , Software Engineering, Rohit Khurana ,Vikas Publishing Ltd , Second Edition , Organizational Behaviours, S.Chandran ,Vikas Publishing Ltd , Latest Edition , Operating Systems, Rohit Khurana ,Vikas Publishing Ltd , 2Nd Edition , Workshop Technology, Waj Chapman ,Vima Books Pvt. Ltd New Delhi , Latest Edition , Energy Auditing In Electrical Utilities, Rajiv Shankar ,Viva Books Pvt. Ltd., New Delhi , Latest Edition , Workshop Tech Vol I,Ii, Iii, Waj. Chapman ,Viva Books Pvt. Ltd., New Delhi , Latest Edition , Wireless And Mobile Network Architectures, Yi-Binglin, Imrich Chlamtac ,Wiley , Latest Edition , Wireless Networks, P. Nicopolitidis ,Wiley , Latest Edition , Operating System Concepts, Abraham Siberschatz, Galvin, Gagne ,Wiley , 9Th Edition , Microprocessor Architecture Programming And Application, Ramesh S. Gaonkar, ,Wiley Eastern Ltd , Latest Edition , Introduction To System Design Using Ic, B.S. Sonde ,Wiley Eastern Ltd , Latest Edition , Fundamentals Of Acoustics, Kingsler And Frey,Wiley Eastern Ltd , Latest Edition , Beginning Android 4 Application Development, Wei-Meng Lee ,Wiley India Edition , Latest Edition , Power Electronics, Mohan, Undeland, Robbins. ,Wiley India Edition. , Media Enhanced Third Edition , Web Programming, Chris Bates ,Wiley India, New Delhi, 3Rd Edition , Cloud Security: A Comprehensive Guide To Secure Cloud Computing, Ronald L. Krutz Russell Dean Vines ,Wiley Publishing, Inc , Latest Edition , Cloud Computing Bible, Barrie Sosinsky ,Wiley Publishing, Inc. , Latest Edition , Total Quality Management For Engineers, Zeiri ,Wood Head Publishers , 1991 , Mechanics Of Structures- Vol 1, S.B.Junnarkar , , Latest Edition , I S 2185 Part I & Ii, Ernest O. Doebelin , , Latest Edition , Pwd & Cpwd Specifications, D.V.S.Murty , , Latest Edition , National Building Code,, , Nbc-2012 , Tamilnadu District Municipal Building Rules And By-Laws,, , Latest Edition , Civil Engineering Drawing And House Planning, B.P. Verma , , Latest Edition , Building Planning And Drawings, Dr N. Kumaraswamy And A. Kameswara Rao , , Latest Edition , Building Planning And Construction, G. Vaidhyanathan, I. Kulasekaran, G. Sathish Kumar , , Latest Edition , Civil Engineering Drawing, S.C.Rangwala , , Latest Edition , A Guide To Civil Engineering Drawing, V.R.Thothathri , , Latest Edition , Theory Of Structures, S. Ramamrutham , , Latest Edition , Analysis Of Structures, V.N. Vazirani & M.M. Ratwani , , Latest Edition , Elementary Theory Of Structures, R.L. Jindal , , Latest Edition , Strength Of Materials, Fv. Warnock , , Latest Edition , Estimating & Costing, Bridie , , Latest Edition , Indian Standard Code Of Practice, Is:1200,, , Latest Edition , I S 456-2000 ; I S 875-1987; I S 800 -2007,, , Latest Edition , Explanatory Hand Book Sp24, Design Aid Sp 16,Detailing Of Reinforcement,Sp 34,, , Latest Edition , Concrete Technology , M.S. Shetty , , Latest Edition , Fire Resistant Construction – Building Construction, S.P.Arora And S.P.Bindra , , Second Edition , Earth Quake Proof , Dr.Janardhanjha And Prof.Suresh Kumar , , Latest Edition , Sinha Is Code Of Practice For Earth Quake , Is Code Of Practice For Fire Resistance, Is Code Of Practice For Pre Stressing,, , Latest Edition , Pile Foundation, Rd Chellis, Mis , , Latest Edition , Construction And Foundation Engineering, Sinha & Janatha Shau , , Latest Edition , Principle Fine Safety Standards For Building Construction, M.Ya Roytman , , Second Edition , Remote Sensing And Geographical Information Systems, Anji Reddy.M. (1998) , , Latest Edition , Analysis And Design Of Substructures (Lsd) – Second Edition 2010, Swami Saran , , Latest Edition , Civil Engineering Drawing, M Chakrabort , , Latest Edition , Civil Engineering Drawing, Gurucharan Singh & Subhash Chandar Sharma , , Latest Edition , Civil Engineering Drawing Manual, S Chand & Company (Pvt) Ltd. , , Latest Edition , Production Systems: Planning, Analysis And Control, J.L.Riggs, 3Rd Ed , , Latest Edition , Productions And Operations Management, A.Muhlemann, J.Oakland And K.Lockyer, Macmillan , , Latest Edition , Operations Research, J.K.Sharma, Macmillan , , Latest Edition , Spoken English – A Self-Learning Guide To Conversation Practice (With Cassette),, , Latest Edition , Quality Control And Applications, Housen&Ghose , , Latest Edition , Industrial Engineering Management, O.P. Khanna , , Latest Edition , Steel Structures, Dr.Subramaniam , , Latest Edition , Town Planning, S.C. Rangwala , , Latest Edition , Town Planning, K.S.Rangwala And P.S.Rangwala , , Latest Edition , Remote Sensing Methods And Application, Michael Hord, R , , Latest Edition , National Building Code Of India- Part-Iii.(2005),, , Latest Edition , Municipal And Panchayat Bye-Laws, Cmda Rules And Corporation Bye-Laws.,, , Latest Edition , Urban And Regional Planning, Ka. Ramegowda , , Latest Edition , Earthquake Resistant Design Of Structures, Pankaj Agarwal And Manish Shrikhande , , Latest Edition , Guidelines For Earthquake Resistant Non Engineered Construction, The Associated Cement Companies Ltd , , Latest Edition , Criteria For Earthquake Resistant Design Of Structures - General Provisions And Buildings, Is: 1893 ( Part 1 ) - 2002,, , Latest Edition , Code Of Practice For Ductile Detailing Of Rc Structures Subjected To Seismic Forces, Is:13920-1993.,, , Latest Edition , Earthquake Tips, C.V.R.Murty, , , Latest Edition , Indian Standard Code Of Practice, Is:1200.,, , Latest Edition , Estimating And Costing, Vazirani & Chandolu , , Latest Edition , Geometrical And Machine Drawing, N.D. Bhatt, Anand , , Latest Edition , Hydraulics, Andrew Parr , , Latest Edition , Fundamentals Of Pneumatic Control Engineering, Festo Manual , , Latest Edition , Electrical Technology, Hughes, , 8Th Edition , Machine Design Bandari,,, , Latest Edition , Industrial Engineering & Management, O.P Khanna , , Latest Edition , Industrial Engineering & Production Management, Martand Telsang , , Latest Edition , Production Engineering , P.C.Shrma. , , Latest Edition , Production And Costing, Gbs Narang And V.Kumar , , Latest Edition , Mechanical Estimating And Costing , Banga & Sharma. , , Latest Edition , Quality Auditing, D.Mills, Chapman And Hall , , 1993 , Refrigeration And Air Conditioning, V.K. Jain, , , Latest Edition , Industrial Refrigeration Hand Book, Wilbert F. Steocker , , Latest Edition , A Course In Refrigeration And Air Conditioning , Domkundwar , , Latest Edition , Principles Of Refrigeration, Dossat, , Latest Edition , Electronic Principles , Malvino , , Latest Edition , Microcontrollers, Principles And Applications – Ajit Pal – Phi Ltd., - 2011.,, , Latest Edition , Biomedical Instrumentation ,Anuradha Publications, Chennai, Dr.M. Arumugam , , Latest Edition , Bio Medical Instrumentation And Measurements, Ii Edition., Leslie Cromwell –Fred J. Wibell, Erich A.P Feither , , Latest Edition , Medicine And Clinical Engineering., Jacobson And Webstar , , Latest Edition , Hand Book Of Bio –Medical Instrumentation., R.S .Khandpur , , Latest Edition , Medical Electronics, Kumara Doss , , Latest Edition , Introduction To Medical Electronics, B.R. Klin , , Latest Edition , Introduction To Biomedical Instrumentation , Mandeep Singh Printice Hall India 2010. , , Latest Edition , Digital Communications, John G.Prokais , , 2011 , Biomedical Instrumentation And Measurements, Leslie Cromwell, Fred J. Wibell, Erich A.P Feither , , Latest Edition , Medicine And Clinical Engineering, Jacobson And Webstar , , Latest Edition , Hand Book Of Bio–Medical Instrumentation., R.S .Khandpur , , Latest Edition , Engineering Mathematics - Dr.M.K.Venkatraman, National Publishing Co, Chennai 2. , Engineering Mathematics – Dr.P.Kandasamy & Others, S.Chand & Co Ltd, New Delhi , Physics, Resnick And Haliday–Wisley Toppan Publishers–England , Engineering Physics–B.L.Theraja–S. Chand Publishers , A Text Book Of Sound–R.L. Saighal & H.R. Sarna–S.Chand & Co. , Mechanics–Narayana Kurup–S. Chand Publishers. , Fundamentals Of Physics – Brijlal And Subramaniam. , Fundamentals Of Electricity – D.N. Vasudeva – S. Chand & Co , Non-Conventional Energy Sources – G.D. Rai.- Khanna Publishers , Text Book Of Remote Sensing And Geographical Information Systems – M. Anji Reddy Bs Publications. , Engineering Chemistry – Jain & Jain – Dhanpat Rai & Sons. , A Text Book Of Engineering Chemistry – S.S. Dara – S. Chand Publication. , A Text Book Of Environmental Chemistry And Pollution Control – S.S. Dara – S. Chand Publication. , Engineering Chemistry – Uppal – Khanna Publishers. , Environmental Chemistry – V P Kudesia – Pragati Publishers. , Chemistry Of Engineering Material – C.V. Agarwal, Andranaidu C. Parameswara Moorthy – B.S. Publications. , A Text Book Of Inorganic Chemistry – P.L. Soni – S. Chand Publication. , Rain Water Harvesting – Hand Book – Chennai Metro Water. , Bhatt N.D. And Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50Th Edition, 2010. , Gill P.S., “Engineering Drawing”, S.K.Kataria & Sons. , Gopalakrishnan.K.R., Engineering Drawing, (Vol.I And Vol.Ii), Dhanalakshmi Publishers, Edition 2 , Venugopal.K, Sreekanjana G, “Engineering Graphics” New Age International Publishers. , K V Nataraajan “A Text Book Of Engineering Drawing” , Besant Agrawal, C M Agrawal “Engineering Drawing”, Tata Mcgraw Hill Education Private Limited. , Barkinson & Sinha, First Year Engineering Drawing, Pitman Publishers. , Communication Skill, Sanjay Kumar Pushp Lata, Oxford University Press , Communication Skill, , Gph Publication , English Communication Teory And Practical, Manoj Kumar Garg, Scholar Tech Press , Little Redbook - Grammar Made Easy, Terry O Brien
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Tamil Nadu View Result →
TenderDetail
Loading tenders