View Bid Results For Plate Flanges Tenders

We found 6741 Bid Results related to plate flanges tenders. You can find Contractor details who won plate flanges tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–50 of 6741 tenders matching your filters

Water Resources and Irrigation #11498698 AOC

Tender for Supply, Erection & Commissioning Of 2 No. Ht Pumps Of 10 Cs Capacity With Other Allied Accessories Complete In All Respect At Mundsa Link Drain And Pressurized Pipeline Outfalling Into Ditch Drain Along Jln Feeder Near Rd 306000-R In Mundsa , Supply, Erection, Testing & Commissioning Of (2 Sets) Horizontal Centrifugal End Suction/Mixed Flow Pumpsets Having Discharge Of 10 Cs At 15 Mtr Head (300X300mm) Having Ca6nm Propeller And Cfbm Suction Casing With Prime Mover Of 100 Hp 1440 Rpm, Ie2 Tefc Induction Motor Having Voltage Rating 380 Volt ± 10% Variation Confirming To Is 325 Mounted On Common Base Plate, Heavy Duty With Confirming To Is 6595 Coupled Through Flexible Coupling Alongwith Fully Automatic Star Delta Starter Suitable For 100 Hp, 415 Volt, 50 Hz. Phase Motor In Crca Sheet Enclosure With Overload, Under Voltage And Single Phasing Protection Through Electronic Relays, Suitable Mccb, Contractor, Ammeters, Voltmeters, Selectors Switches Capacitor Bank Of 30 Kvar For Each Motor Complete In All Respect. The Panel Should Be Inbuilt By One Standard Approved Manufacturer. The Work Also Constitutes Of Execution Of Suction Pipe 300 Mm, 8 Mm Thickness (15 Mtr For Each Set) Complete With Flanges, Nuts Bolts Rubber Sheets And Foot Valves Of 300 Mm Dia For Both Sets And Delivery Pipes 300 Mm, 8Mm Thickness Along With Non Return Valve And Sluice Valve Of 300 Mm With Pressure Gauge Of Required Capacity. Both Delivery Pipes To Be Connected With Tee Of Size 300X500x300mm Fabricated In Ms Plates 8Mm Thickness. The 500Mm Side Of Tee Has To Be Connected To The Existing 500Mm Dia Hdpe Pipe Already Laid, The Work Also Consists Of S/E/C Of One No. Vacuum Pump Dvs) Od Sv40 Complete With 5Hp Prime Mover Motor, Gi Pipe Of Necessary Dia Complete Along With All Accessories For Connecting The Same With The Two Sets Of Horizontal Pumpsets. One Bus Bar Box 630 annual periodical maintenance Along With Mccb 630 annual periodical maintenance And Doi. Starter For Vacuum Pump Complete With Cables For Connecting Motors From Starter From Bus Bar Box Complete In All Respect.

Contract Date: Jul 06, 2026 Contract Value : ₹ 65.00 Lakh

Government Departments No of Bidders 2

Haryana View Result →

Defence #11496759 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Assam View Result →

Water Resources and Irrigation #11491318 AOC

Contract Date: Ref. Documents Contract Value : ₹ 23.60 Lakh

Government Departments No of Bidders 1

Telangana View Result →

Defence #11478095 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 8

Punjab View Result →

Public Administrative Department #11475455 AOC

Bids Are Invited For Single Plate Swing Check Valve (Dn 150, Ansi# 150) Wafer Type Wb 26 For Flange Ansi# 150 Total Quantity : 4

Contract Date: Ref. Documents Contract Value : ₹ 9.80 Lakh

Government Departments No of Bidders 2

Puducherry View Result →

Educational and Research Institute #11474153 AOC

Contract Date: Ref. Documents Contract Value : ₹ 8.80 Lakh

Boards / Undertakings / PSU No of Bidders 6

Madhya Pradesh View Result →

Water Resources and Irrigation #11460255 AOC

Contract Date: Ref. Documents Contract Value : ₹ 7.55 Lakh

Government Departments No of Bidders 1

Telangana View Result →

Public Administrative Department #11460179 AOC

Contract Date: Ref. Documents Contract Value : ₹ 3.17 Lakh

Local Bodies No of Bidders 1

Telangana View Result →

Public Administrative Department #11458204 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 4

Maharashtra View Result →

10.

Defence #11457506 Technical Bid

Tender for Sheet Roof - Conferene Hall And Lorry Shed , S & F Rolled Mild Steel In Plate Girder Or Single Stanchions, Built Up Of One Beam Or Channel Section With Flange Plates, Caps, Bases. Splices, Angle Brackets, Cleats And Other Connections, Fe-410-W (Gde-E-250) Quality-B , S & F Rolled Mild Steel In Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc. Fe 410-W (Gde-E- 250) Quality-A , S & F Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) And Hanging; Also Fastening And Fixing Complete, Fe-410-W(Gde-E-250) Quality-B , S & F Pre- Painted Galvatume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified , M & L For Painting Steel & Iron Surfaces Of Any Description, Over 10Cm In Width Or Girth, Not Otherwise Described Which Includes Preparation Of New Or Previously Untreated Surfaces, Priming With Red Oxide, Zinc Chrome, Applying Synthetic Enamel (Ordinary Tint) , Formwork To Sides Of Square, Circular Rectangular On Plan Or Polygonal Pillars, Posts, Struts, Piers, Columns And Stanchions, Fair Finished Surfaces Of Concrete , Laying And Jointing Pvc Pipe. Heading , Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips , M & L For Reinforced Cement Concrete (Nominal Mix) In Type B1 1:2:4 (20 Mm Graded Aggregate) In Columns, Pillars, Piers, Posts And Struts , Labour Only For Dismantling Of Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness, Including Nainital Or Similar Pattern Roof Coverings , Labour Only For Dismantling Structural Steel Work Including Doors, Gates But Excluding Framed Truss Etc. , M & L For Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders , M & L For Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil , M & L For Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Hard/Dense Soil , M & L For Formwork To Flat & Fair Finished Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter , M & L For Cement Concrete In Surface Channels And Drains Type B2 (40 Mm Graded Aggregate) , M & L For Cement Concrete In Foundations, Filling And Mass Concrete Type D2 (40 Mm Graded Aggregate) , Providing And Laying 60Mm Thick Factory Made Chamfered Edge Cement Concrete Paver Block Of M-35 Grade With Approved Colour, Design & Pattern As In Footparth, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc., Of Required Strength, Thickness & Size/Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over And Including 50Mm Thick Compacted Bed Of Fine Sand, Compacting And Proper Embedding/ Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Kerala View Result →

11.

Public Administrative Department #11441629 Price Bid

Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Suri-I Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 5

West Bengal View Result →

12.

Drinking Water Supply and Sanitation #11440764 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Tamil Nadu View Result →

13.

Communications and Information Technology #11440065 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Kerala View Result →

14.

Public Administrative Department #11437950 Technical Bid

Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Rajnagar Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 4

West Bengal View Result →

15.

Public Administrative Department #11433258 AOC

Supply And Delivery Of Water Supply Hand Bore Materials For Maintenance Of Water Supply Under Mgf In Nalgonda Municipality-150.00 2” G.I. Pipes “B” Class I.S.I. Make Pipes 150.00 32 Mm B-Class G.I. Pipe As Per Ssr 50.00 Connecting Rods 12Mm 15.00 Cylinder Assembly Complete Set 15.00 Cylinder Body With Brass Liner ( Mt ) 15.00 Head With Third Plate Assembly 15.00 Water Tank Assembly 15.00 Handle Assembly ( Without Axle ) 30.00 Upper Valve Assembly 30.00 Lower Valve Assembly 100.00 Upper Valves Guide 100.00 Reducer Cap 120.00 M-12 Bolts & Nuts 500.00 Rod Couplings 120.00 Chain With Coupling 250.00 G.I. Coupling 250.00 Pump Buckets 800.00 Sealing Rings 120.00 Handle Axle With 2 Nuts & Washers 120.00 6204Z Bearings 250.00 Cylinder Rod ( 1 Feet Length ) / Plunger Rod 25.00 1 Feet Extension Flange 250.00 Chain Bolt & Nut 250.00 Rsr Rubber Washers Big 250.00 Rsr Rubber Washers Small 12.00 Telescopic Stand Assembly 3.00 3 No. Pipe Vice ( Mangan ) 3.00 24” Pipe Wrench ( Taparia Make ) 2.00 18” Pipe Wrench ( Taparia Make ) 2.00 12” Pipe Wrench ( Taparia Make ) 2.00 17 X 19 Ring Spanner 2.00 17 X 19 Double End Spanner 5.00 Hacksaw Frame 50.00 Hacksaw Blade 2 Sided 3.00 12 Mm Dye Bit Complete Set 3.00 32 Mm Dye Bit Complete Set 5.00 Screw Driver Big Size 3.00 Pipe Lifters 2.00 Hammer Big Size

Contract Date: Ref. Documents Contract Value : ₹ 12.69 Lakh

Local Bodies No of Bidders 1

Telangana View Result →

16.

Health and Family Welfare #11430568 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 7

Rajasthan View Result →

17.

Rural Development #11427957 Technical Bid

Tender for Supply And Installation Of Pumping Set In Mc, Narnaul. , Monoblock Pump 6X6 Isi Make , Suction Pipe 150 Mm I/D , Non Return Valve 150 Mm I/D , Long Bend 6 , Ms Foundation , Engine Set 30 Hp Tata/Eicher Make (Refurbished) , Gear Box , Hissa , Tyre 215 Nos , Battery 13 Plate 12 Watt Isi Make , Polythene Pipe 06 , Alternator , Ms Clamp 6 , Flange 6 , Assemble Rate , D/F Reducer 6X 4

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Haryana View Result →

18.

Home Affairs #11427175 AOC

Contract Date: Jul 02, 2026 Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 4

West Bengal View Result →

19.

Health and Family Welfare #11421202 AOC

Bids Are invited for Various Types Of Engineering Spares 03 Inch Pn Butterfly Valve , 04 Inch Pn 16 Butterfly Valve , Teflon Sheet , 80 Mm Nb C C Sorf Flanges , 80 Mm C.S. Erw Short Radius 90 Degree Bend , Ms Hexagonal Full Threaded Nut Bolts , Ms Hexagonal Full Threaded Nut Bolts , 06 Mm Thick Mild Steel Plain Plate , Rolled Steel Angles Total Quantity : 1051

Contract Date: Ref. Documents Contract Value : ₹ 95,401

Boards / Undertakings / PSU No of Bidders 5

Maharashtra View Result →

20.

Defence #11421175 AOC

Bids Are invited for Knuckle Bearing , Knuckle Kit , Flange Knuckle , Axle Chuck Nut , Hub Wheel Nolt , Wheel Bearing Inner Outer , Axle Shaft Threading Lathe Machine Work , Axle Oil Seal Nut , Both Side Hub Knee Assembly Removing The Vehicle And Taken Lathe , The Above Mentioned All Parts Removing The Vehicle, Both Side Hub , Water Pump , Old Water Pump Removing Fan Belt Radiator Bearing Checking New , Rotary Pump Nozzle , Cam Plate , Td Piston , Positioner , Head Assy , Tapet Roller , Packing Kit Service Kit , Pump Taken To Pump House Pump Stripping Checking All Parts Above , Relay , Veh Full Electrical System Checking And Damaged Looms Change , Water Pump Assy , Radiator Assy , Cooler Assy Full Service , Fly Wheel Sensor , The Above Mentioned All Parts Removing The Vehicle, Both Side , Front Wheel Bearing Right Side Inner , Feed Pump , Pump Nozzle , Driving Shaft , D C Bush , Timing Sensor , Pump Stripping Full Parts Checking Cleaning Above Pump Parts Damage , Wiper Motor Assy , The Pump Removing The Veh Wiper Motor Removing Pump And Nozzle Total Quantity : 72

Contract Date: Ref. Documents Contract Value : ₹ 2.86 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Karnataka View Result →

21.

Defence #11421088 AOC

Bids Are invited for Mt Grant Plate Read Valve - Stln , Read Valve Gasket - Stln , Hand Prime - Stln , Door Regulator Machnism - Stln , Clutch Mast Cyl Assy - Stln , Coupling Flange - Stln , Door Lock Assy - Stln , Shock Observer Frt - Stln , Ignition Switch - Stln , Pressure Plate - Stln , Clutch Plate - Stln , Fan Belt - Mg , Hose Pipe Water - Mg , Coil Ignition - Mg , Gear Leaver Kit - Mg , Door Glass Carrie Channel - Mg , Silencer Assy - Ml , Center Pipe - Ml , Air Filter Kit - Ml , Clutch Fan - Ml , Distance - Ml , Drive Pinion - Tmb , Spider Bearing - Tata , Assy Clutch Master Cyl - Tata , Bolt M12x1 5X45 - Tata , Rubber Hose - Tata Total Quantity : 51

Contract Date: Ref. Documents Contract Value : ₹ 95,434

Statutory Bodies & Commissions/Committees No of Bidders 3

Maharashtra View Result →

22.

Public Administrative Department #11417770 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 6

Maharashtra View Result →

23.

Drinking Water Supply and Sanitation #11415826 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

West Bengal View Result →

24.

Defence #11413644 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 16

Jammu And Kashmir View Result →

25.

Defence #11406410 AOC

Bids Are invited for Boq Based Biding Pressure Plate , Yoke Joint Flange , Shaft Assy Propeller , Cord High Tension , Gear Shaft Warm Wheel , Relay Solonid Engine , Hose Assy , Wirning Harness , Shifting Fork , Gear Shift Lever , Synchroning Cone , Main Shaft , Assy Universal Joint , Armature Assy Total Quantity : 17

Contract Date: Ref. Documents Contract Value : ₹ 86,581

Statutory Bodies & Commissions/Committees No of Bidders 3

Himachal Pradesh View Result →

26.

Road Transport and Highways #11404048 AOC

Contract Date: Jun 29, 2026 Contract Value : ₹ 22.73 Lakh

Boards / Undertakings / PSU No of Bidders 31

Tamil Nadu View Result →

27.

Housing Urban and Rular Development #11403465 Technical Bid

Tender for Procurement Of Mixed Flow Centrifugal Pump & Mud Pumps For Mitigation Of Urban Flooding Of Guwahati City , Supply, Installation & Commissioning Of Mixed Flow Pump Set With Discharge Range Of 270 - 250 Litre Per Second With Head Height 10.00 Mtr Coupled With 4 Pole 35-40Kw Motor Along With All Accessories. Application: Storm Water Discharge Capacity: 250 Lps Npshr: 5.30 M Viscosity: As Water Total Head: 10.00 Mtr Stages: Single Pump Efficiency: 80% To 85% Rated Speed: 1500 Rpm Impeller Diameter: 283 Mm To 338 Mm Motor Rating: 37.00 Kw Service Factor: 1.00, Frequency: 50 Hz Performance Testing Standard As Per Iso: 9906/Ansi-Hi 14.6 Gr 2B , Supply Of Ms Pipe Of 300 Mm Dia. Made From 6 Mm Thick Plate And Fitted With Flange In Both Ends With Hole For Fitting For Delivery Of Water From The Trolley Mounted Pump At The Rate Of 350 Ltr/Sec Of Discharge With Head 8-12 Mtr Complete As Directed. , Supply And Commissioning Of Kirloskar Make/Equivalent Taf2 Engine With Reputed Make Sp4l Mud Pump With Base Frame Coupling Type Complete Pump Set , Supply Of Pvc Suction Pipe 4 , Supply Of Gi Bend 4 , Supply Of Ci Tail Piece 4 , Supply Of Canvas Pipe 4 , Supply, Fixing & Installation Of Reputed Make 400 Mm_Pn 1.0_ Ci Nrv , Supply, Fixing & Installation Of Reputed Make 450 Mm_Pn 1.0_ Ci Nrv , Supply, Fixing & Installation Of Reputed Make 400 Mm_Pn 10_ Ci Bfv , Supply, Fixing & Installation Of Kbl Make 450 Mm_Pn 10_ Ci Bfv , Supply, Fixing & Installation Of Reputed Make 5Hp Vacuum Pump Set

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Assam View Result →

28.

Railways #11402302 AOC

Contract Date: Jun 28, 2026 Contract Value : ₹ 6.19 Lakh

Government Departments No of Bidders 1

Telangana View Result →

29.

Defence #11392755 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 3

Assam View Result →

30.

Health and Family Welfare #11387303 AOC

Contract Date: Ref. Documents Contract Value : ₹ 26.89 Lakh

Government Departments No of Bidders 1

Telangana View Result →

31.

Health and Family Welfare #11383742 AOC

Contract Date: Ref. Documents Contract Value : ₹ 1.31 Crore

Government Departments No of Bidders 1

Telangana View Result →

32.

Heavy Industries and Public Enterprises #11365090 AOC

Bids Are invited for Protection Cap, Drg: 31391201275, Rev: 00, Mate. Code- W96415209701 , Protection Cover, Drg: 31391201274, Rev: 00, Mate. Code- W96415209710 , Flange (Lead In Plate) , Drg: 31391201267, Rev: 01, Mate. Code- W96415210041 Total Quantity : 22

Contract Date: Ref. Documents Contract Value : ₹ 1.62 Lakh

Boards / Undertakings / PSU No of Bidders 2

Uttarakhand View Result →

33.

Railways #11364179 AOC

Supply Of set of spares for lhb power , set of spares for lhb power fitted with cummins engine make model no. ktaa-19-g10 consisting of items. (1) spacer mounting to cummins p art no.3046286.-qty 20 nos./set. (2) screw hex flange head cap to cummins part no.3046283.-qty 20 nos./set. (3) screw hex flange head cap to cu mmins part no. 3066497.-qty 04 nos./set. (4) key offset woodruff to cummins part no.200711.-qty 01 no./set. (5) lock plate to cummins part no. 109 319.- qty 02 nos./set. (6) screw hexagon head cap to cummins part no. s 112.- qty 02 nos./set. (7) bushing to cummins part no. 132770.- qty 02 nos./s et. (8) screw hexagon head cap to cummins part no. s 104.-qty 03 nos./ set.(09) nut, regular hexagon to cummins part no. s 205.-qty 02 nos./set.(1 0) washer, plain to cummins part no. 200861.-qty 10 nos./set. [ warranty period: 12 months after the date of delivery ] ]

Contract Date: Jun 26, 2026 Contract Value : ₹ 73,608

Government Departments No of Bidders 1

Tamil Nadu View Result →

34.

Coal and Mines #11360812 AOC

Bids Are invited for Suction Strainer 40 Mesh 625B050000122 , Bearing Block Assembly 912M100000322 , Inching Cabel St Valve 412A000000228 , Relief Cartridge Eea0008997 , Return Filter Eea0028457 , Squence Valve 912B050000127 , Priority Valve 625A000003070 , Spider Assy 811M100000417 , Filter Assembly Eea0005879 , Drive Line Mid 811B050000128 , Drive Line Front 811B050000136 , Drive Line Rear 811B050000130 , Tapper Lock Bush 611A050000256 , Tapper Lock Bush 912A050000296 , Steering Valve 811B050000134 , V Belt 811A050000160 , Relief Valve Eea0017448 , Transmission Temp Gauge 813B000000183 , Drive Oil Pressure Gauge 813B000000182 , Oil Pressure Gauge 813B00000185 , Pilow Block Bearing 811A050000143 , Oil Level Window 241A000000284 , Sequence Cartridge Eea0018979 , Accumalator 4 Ltr 811A050000191 , Accumalator 1 Ltr 811A050000192 , Kit Drive Plate Eea0010872 , Load Cartridge Valve Eea0015117 , Cable Reel Valve Assembly 250C050000011 , Idler Sprocket Assy 250A070000036 , Flange Eea0015406 , O Ring Eea0021697 , Piston Eea0021737 , Back Up Ring Eea0021738 , O Ring Eea0021751 , Cover Eea0021750 , O Ring 12Wl4189653a , Backup Ring 12Wl4189654a , Seal Hub Eea0015443 , Half Shaft Eea0021717 , Nut Eea0021726 , Stud Eea0021727 , Tip Cylinder 625B050000166 Total Quantity : 103

Contract Date: Ref. Documents Contract Value : ₹ 15.49 Lakh

Boards / Undertakings / PSU No of Bidders 1

Maharashtra View Result →

35.

Petroleum and Natural Gas #11346768 AOC

Bids Are invited for Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (A-1) 4 core 4 Sq. mm , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (a) 3 core 2.5Sq. Mm , Laying of XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (G) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core) , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 25 Sq. mm , Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (D) 3 core 10 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (a) 2 to 4 core 2.5/ 4 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (A)3 core 2.5 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 4 core 25 Sq. mm , Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (c) 3 core 10 Sq. mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A)4Sq.mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 2.5 Sq.mm , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 25 Sq.mm. , Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm , Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and back filling the same and making the surface as normal ground. , Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground. , Covering of cable with second class bricks or cement tiles laid cover the cable crosswise & also on both sides with covering of 7. 5 Cm. layer of sand above & below cable (16 bricks per meter) , Providing and erecting Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 50 K.A. and above at 415 V having Normal current rating 400A with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing [ ICS=100% of ICU only, Cat III] , Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. , Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , Disconnecting the cable connection and Providing straight joint with PVC mould using heat shrink /cast resin type epoxy compound Insulating material and making the joint complete using necessary in line connectors, hardener, earth continuity connection, spacers etc. and reconnecting the same & ensure the joint resistance within the limits as per IS. (B)3.5C 50 Sq. mm cable. , Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge.(5) 300 X 50 X 2.0 mm Thick , Providing and fixing approved make 90° Elbow for Perforated C type cable tray. Made from sheet steel. The Junction should be bended as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge. (5) 300 X 50 X 2.0 mm Thick 90° Elbow , Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included) as per Specification and as per instruction of engineer in charge. (2) 100 X 50 X 1.6 mm Thick , Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete. , Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with necessary curing for pole muffing or any other purpose.

Contract Date: Ref. Documents Contract Value : ₹ 9.58 Lakh

Boards / Undertakings / PSU No of Bidders 4

Gujarat View Result →

36.

Housing Urban and Rular Development #11346479 Technical Bid

Tender for Construction Of Modular Ot Eye Under Old Sadar Hospital At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

37.

Housing Urban and Rular Development #11346477 Technical Bid

Tender for Construction Of Modular Ot (Eye) Under Sub Divisional Hospital At Madhupur Dist Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

38.

Housing Urban and Rular Development #11346476 Technical Bid

Tender for Construction Of Modular Ot (General & Gynae) At Chc Under Sarwan Block At Deoghar For The Year-2025-26. , Egp. Puff Panels For O.T Wall Walls &Ceiling , Supply, Installation, Testing And Commissioning Of Modular Ot Walland Corner Panels With Insulated Prefabricated Puff Panels. The Ot Wall Shall Be Constructed Using Egp Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The Panel Of The Theatre Shall Be Sufficient For , G.I. Puff Panels For Ot Ceiling , Modular Ot Ceiling Panels With Insulated Prefabricated Puff Panels. The Ot Ceiling Shall Be Constructed Using Gi Puff Panels Having 0.8 Mm Thick Gi Sheets On Both Sides. These Panels Should Have Been Produced In A Double Band Laminator, In Which Two Continuously Moving Belts Carrying 120 Gsm Galvanized Steel Sheets Of 0.80 Mm Thickness Are Firmly Bonded Together By Sprayed -In Insulating Foam, Which Hardens During The Process. The Core Consists Of Rigid Polyurethane Foam, Which Has Been Injected Under High Pressure, With A Minimum Density Of 40Kg/M3. The Thickness Of Puff Shall Be Minimum 40 Mm. The Sheet Panel Shall Be Of Indigenous Reputed Make And Be Provided With Manufactures Test Certificate. The Puff Panel Shall Be Fixed To The Floor With Bottom Track Of 1.5 Mm Thick Steel U Channel Section Having Min Size Of 50Mm X 50Mm. The Bottom Shall Be Fixed In The Floor Of The Ot With 10Mm Thicknessand Min. 60 Mm Long Ss Fasteners Which Shall Be Fully Threaded And Power Drilled. The Panels Of Walls And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Panels Of Wall And Ceiling Shall Be Tied Together By Suitable Ss Coving. The Individual Wall Panels Shall Be Welded Together By Ss. All Joints Shall Be Filled With Metal Filler And Shall Be Sand Casted On Site Till Smooth Finish Is Obtained. Wall & Panel Joints Shall Not Be Visible After The Final Wall Coating Is Applied. The Gap Between The Masonry Wall Surfaces And The , Antibacterial / Antifungal Paint. , Providing And Establishing Anti-Bacterial & Anti Fungicidal Sterile Coating Of Liquid Plastic Paint On Gi Puff/Ss Panel Of Modular Ot. The Paint Should Be Seamless, Easy To Clean, Should Have Vapor Permeability Which Allows Substrate Moisture To Escape And Protects Against Growth Of Bacteria, Mound And Yeasts, Moisture Resistance, Freeze / Thaw Resistance. Anti- Bacterial Anti Microbial Quality Should Remain Active Throughout The Life Of The Product. Vapors Permeable Structure Should Allow Damp Substrates To Dry Out Without Causing Blistering. It Should Tolerate Cleaning With Hospital Chemical Agents. Filling Of All Joints And Cavities Should Be With Metallic Epoxy Filler And Sand Casted Flush To Provide A Joint-Less Finish. This Should Include All Fittings, Accessories, Hardware, Support Structures, Etc. Required For Installation. Anti-Bacterial And Anti-Fungus Sterile Coating Shall Be Applied On The Finished Walls & Ceiling With At Least 2-3 Coats To Achieve A Thickness Of Minimum 200 Micron. Before Application Of Sterile Wall Coating An Appropriate Primer Shall Be Applied. The Primer Shall Be Supplied Along With The Paint And Should Be Of The Same Make As That Of Paint. And Shall Be Applied Prior To Coating Of Anti-Bacterial & Anti- Fungus Sterile Paint On Walls & Ceiling 2-3 Coats Shall Be Applied To Achieve A Thickness Of 200 , Laminar Air Flow , The Range Of Ventilated Ceiling Should Provide The Sterility And Cleanliness Required For Ot Environ Ment. Perfect Tightness Should Be Guaranteed By A N Epoxy Seal Between Filters And Holding Structure Disabling Â€Œby Passâ€ Of Hepa Filters. Two Nos . Pressure Measurement Ports Shall Be Provided In Each Housingairflow: 50 +-10% Fpm Class 100/Iso C Lass 5 As Per International Standard & Meets Din 1 946-4. D.O.P. Tested Point To P Oint Scanned Minipleat Hepa Filters Having Followi Ng Technical Specifications To Be Fixed In Above H Ousings F Rame Â€ Aluminium. Type Â€ Flange Type. Media Â€ Micro Fiber Glass . Se Aling Of Media Â€ By Means Of Epoxy. I.P.D. - 15 Mm Wg. F.P.D. Â€ 50 Mm Wg. Separators Â€ Concealed Al. Or Hot Melt G Lue. Capacity Â€ 500 Cfm Size Of Laf - 2400 X 2400 Mmthe Work Should Be Executed As Per The Direction Of Enginee R In Charge , Homogeneous Conductive Pvc Vinyl Flooring In O.T.,Icu,Opd. , Providing And Fixing 2 Mm Thick Homogeneous Conductive Pvc Jeoflor Electro + Sd Roll Acts As A Continous Conductive 10^6 Rt10^8. It Has Preminum Antistatic Properites, ( 100 V) The Product Has To Be Groundedwith An Esd Copper Strip( Cf. Finishes To Meet Its Full Performance The Product Is Non Reactive To Residual Indentation With A Value 0.02 Mm. The Flooring Is A Group Twear Rating Suitableheavey Duty Trafficareasand Bfi-S1 Fire Resisteance. The Product Is Non -Emissive Of Volatile Organic Compounds With 10Ug/M2 ( Tvoc After 28 Days Iso 1000-6.Total Thickness En428 2Mm, En 430 G/Sq.M 2900, Width 426 Cm/Lm 200/20, En (European Standard) En 685 Classs 34-43, Fire Rating En1081 0Hm 1^^6 Rt 10^8 Make Jeo Flor Esd Coundictive Flooring , Writing White Board. , Supply & Installation Of Writing Unit/White Boardof Size 900/600 Mm Having 1.60 Mm Thick White Laminate Board Top, Bonded To A 40 Mm High Density Fiber Board Sheet For Additional Rigidity. The Unit Should Open To Create A Wall Mounted Writing Surface Within The Operating Room. The Work Should Be Executed As Per The Direction Of Engineer-In-Charge. , Storage Unit . , Supply And Installation Of Storage Unit Of Ss 304Of Reputed Make And Having Size 1665 X 865 X350 Mm And Having Two Or More Glass Shelves Of Toughened Glass 10 Mm Thick, Supported With D Type Bracket (Ss 304 Grade) With 10 Mm Thickness And Rubber Gasket Of 2Mm And Mounted Flush On Wall. The Work Should Be Executed As Per The Directions Of Engineer-In-Charge. , Pressure Release Damper. , Supply, Installation, Testing & Commissioning Of Ss Fabricated Cascade Pressure Stabilizer Having Ss Blades To Control Operation Theatre Room - Air Pressure Of Approved Make As Per Tech. Specs Attached. , Peripheral Lights (Dimmable). , Supplying & Fixing Of Sturdy Writing Board Of Size: 840Mm X 640Mm With Perfect Marker Writing Surface In Front And Back Is Laminated To Make Water Proof Surface. The Board Has To Be Provided With Anodized Aluminium Framing And Its Back Should Have Hooks For Wall Hanging Of Approved Make And Type Directly On Wall , Ahu With Outdoor Unit Ac 11.5 Tr Including Insttalation , Double Skin Air Handling Unit :Supply, Installatio N, Testing And Commissioning Of Double Skin Constr Uction Air Handling Units. With Inner Sheet Ss 304 And Ouer Sheet Ppgi With 40 Mm Panel Thickness With Mixing Box With Fa,Ra,Sa Dampers, Fitted With 2 Stage Filteration Arrangment Completed With 10 Micron Filters 5 Mico Nfilter After Fan Section. Suitable For Outdoor In Stallation With 45 Mm Thick Panels With Inner Skin 0.6Mm Thick Aluminium Sheet, Thermal Breack And W Eather Proof.Motor Efficiency Factor - Ie-2Â- Mix Ing Box With Manually Operated Fresh & Return Air Al Dampers.Â- Filter Section With 50 Mm Thick Box Type Pre-Filter (Merv-8) & 305 Mm Thick Rigid Med Ia Type Fine Filter (Merv-10) Mounted On A Common Filter Frame & Viscous/ Wasable Synthetic Type Air Pre-Filterâ- Coil Section With 8 Row Deep Dx Coi L . Fin Material - Plain Aluminium Fin Spacing - 1 1-13 Fpi, Condensing Tray - 22G Ss304, Test Pressu Re - 38Kg/Sq.Cm. Insulation Material For Drain Tra Y-13Mm Thick Close Cell Nitrile Rubber.Â- Uv Lamp , Aluminum Ductiing 22 Gaze , Ducting : ( Al. Sheet Metal )Ducting:- Supply And Fixing Of Site Fabricatedal Sheet Metal Ducts In A Ccordance With Theapproved Shop Drawings And As Re Quired As Per Specifications.All Necessary Gi /Ms Supports Using Thread Rods (As Directed). Angle, F Lat, And Anchor Bolts, Food Grade Neoprene Gaskets , Food Grade Adhesive Included In The Scope. , Insulation , Underdeck Insulation :Supplying And Fixing Of Unde Rdeck Roof Insulation Of 13 Mm Thickness Of Mat Fi Nish Closed Cell Antimicrobile Nitrile Rubber ( Cl Ass O ) Insulation On Existing Surface After App Lying Two Coats Of Cold Setting Adhesive As Requir Ed. , Surgical Scrub (2 Bay). , Supplying, Fixing Installation, Testing Andcommissioning Of Scrub Sink With The Following Specifications:- Compact Surgical Scrub Sink Should Be Designed For Use In Ot Complex For Pre Procedural Scrub Up. (Double Sink Combination Size 1600 Mm X 450Mm X 1650 Mm Back Height& 1200 Mm And Front Heightas Suitable) Â€¢ Each Fixture Should Be Fabricated From Heavy Gauge Type 304 Stainless Steel (Minimum Thickness1.5Mm) And Should Be Seamless Welded Construction, Polished To A Satin Finish Â€¢ The Scrub Sink Should Be Provided With A Front Access Panel Which Should Be Easily Removed For Access To The Water Controlled Valve, Waste Connections, Stoppers And Strainers.Â€¢ Hands Free Operation Should Include Infra-Red Sensors With Programmable Adjustment.Â€¢ Thermostatic Mixing, Valve Control Should Be Located Behind The Access Panel And Maintain Constant Water Temperature.Â€¢ Timing Should Be Adjustable To Meet Individual Application Requirements.Â€¢ Provided With Infrared Sensors, Thermostatic Control Taps With Feel Safe Temperature Controls With Foam Flow Attachments And Provide With Betadine Dispensers .Â€¢ All Units Should Have Reduced Anti- Splash Fronts. Â€¢ Knee/Foot Operated Switch Should Be Provided Additionally. The Work , Sliding Type Hermitically Sealed Ot Door (Autometic) , Supply & Fixing Of Sliding Type Ot Door Having High Density Particle Board Cores, High Pressure Laminate Face On Both Sides, Viewing Window 300 X 300Mm. Standard Size: 1500 X 2100 Mm (W X H) , Surgeon Control Panel. , Supply, Installation, Testing & Commissioning Of Multi Colour Coded Surgeon Control Membrane Touch Panel, Flushed In The Theatre Wall Comprising Of The Following Features & As Per Technical Specification Attached: 1. Display Of Day Clock 2. Display Of Elapse Time Clock 3. Dimmer For Peripheral Lights 4. Medical Gas Alarm 5. Hands Free Telephone 6. Indicator For Temperature & Humidity. , X-Ray View Screen. , Supply, Installation, Testing & Commissioning Of Twin Plate X- Ray Viewing Screen Designed To Provide A High Level Of Control Luminance Without Flickering & As Per The Technical Specification Attached. X-Ray View Screen (Two Screen) Led Overall Dimensions (Lxhxt) 880 X 503 X 29Mm View Area (Wxh) : 736 X 440 Mm Light Source : Led Power Consumption / Input Power : 30W / Ac 100-240V Illumination Intensity : 5,500 Lux Approx. , Surgeon Pendent , Providing & Fixing Of Singale Arm Multi Moveable Surgeons Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthesia Pendant . , Providing & Fixing Of Single Arm (900Mm) Anaesthesia Pendant With Load Carrying Capacity Of 80Kg And Rotational Values Of 330-340 Degree With Adjustable Stopper. The Pendent Should Be Designed With Service Head To Host, Base, Gas Module, Electric Modular And Shelves Upto 8 Gas Outlets & 10 Electrical Switches. Racks & Shelves Should Be Provided To Mount The Equipments Like Monitor Etc. The Surgeon Pendent Should Have Two Arms , Anaesthsia Trolley: Made Of Composite Laminate - Overall Size 950Mmx600mmx570mm H - Cosmokartz Or Equivalent , Eye Ot Table Opthal Ot Table , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro- Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type Water Proof Rubber Mattress 1 Pc. 1 Pair 2 Pcs. 1 Pair 1 Pair 1 Pair 1 Set , Multi Purpose Ot Table With C - Arm Compitable , Cognate Ss- Is A Sophisticated Yet Economical Operating Table Remote Control Specially Designed For C Arm Image Intensifier. Its Unique Design Permits It To Excel Over Competitive Offering In The Areas Of Micro-Neuro, Orthopaedics, Cardiovascular, Ob/Gyn, Ophthalmology, Ent, Urology And Other Major Or Minor Operations, The Electro-Mechanical Driving Mechanism Assures Smooth And Quiet Movements Of The Table Top. The Table Top Is Made Of Radio-Translucent Material For Fluroscopic Capability, Operating Positions Including Height Adjustment, Trendelenberg, Reverse Trendelenberg, Lateral Tilt And Back Section Can Be Controlled Quickly And Accurately With The Help Of Lightweight Hand Control Unit, The Excentrically Positioned Table Top, Without Cross Members, To Optimize Image Intensifier Accessibility For Both A/P & Lateral Exposures Standard Accessories L-Shaped Anaesthetic Frame Shoulder Support With Pad Arm Board With S.S Top Lateral Support With Pad Wrist Strap Knee Crutches Goepal Type , Instrument Trolley Fully Ss - Double Shelf, Three Sides Railings., Mounted On 5 Diawheels , Two With Brakes, Size 30X18X36H All 304Gss , Led Operating Light , Providing & Installation Of Led Operating Light Having Maximum Illuminance (1M): 160,000 + 160,000 Lux At 1M Distance, Electrical Power: 150 + 90 W, Power Consumption: 2X 11 A, Fitting: Ceiling Anchoring Ring Ceiling Pendant With 2 Brackets And 2 Spring Arms, Range Of Movement: 1X 360° / 1X 330°, Recommended Room Height: At Least 2.45 M, Max. Ceiling Load: 2X 218 Nm / 650 N, Light Body Weight: 9.2 + 7.5Kgs, Light Body Depth: 1X 130 Cm / 1X 140 Cm, Air Shielding Surface: 2 X 330 Cm2 Transformers: 2X 450Va/230V/26V, Brightness Regulator: 2X 20 - 500 Va (Primary Voltage), Provided With 2 Sterilisable Handles With Each Dome, Easy Positioning By Sterilisable Handle, Focus Adjustable By Sterilisable Handle, Life Time Of Bulbs : 45,000 Hours Etc As Per Technical Specifications Attached , Electrical Works & Distribution Board : Supply Laying, Fixing And Testing Of Flexible Copper Wire Thick 2.5Mm Single Core For Equipment,Electrical Power Control , Lights, As Per Requirement , Floor Mate (Icu/Ot Grade) Paint Should Not React With Betadine (Yellow Patch Of Betadine One Floor Looks Very Ankwred) , Glove Box , Multiple Electric Plug Points (65A) For Carm Lithoclast Lap Tower With Complete Electrical Fittings. , Add 18% Gst (In Basic Rate Must Fill 0.18) , Add 1% Labour Cess (In Basic Rate Must Fill 0.01)

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Jharkhand View Result →

39.

Defence #11344734 AOC

Bids Are Invited For Pvc Insulated Aluminium Cable Single Core And Multi Core Circular Sheathed With Rigid Conductor Isi Marked To Is 694 (Q2) , Miniature Circuit Breakers (Mcb) For Ac Operation Marked To Is/Iec 60898 (Part 1) (Q2) , Pvc Insulated Copper Cable Single Core And Multi Core Circular Sheathed With Flexible Conductor (V2) Isi Marked To Is 694 (Q2) , Xlpe Cable For Working Voltage Up To And Including 1.1 Kv Marked To Is 7098 (Part 1) (Q2) , Moulded Case Circuit Breakers (Mccb) Conforming To Is/Iec 60947 (Part 2) (Q2) , Cp Pillar Cock Brass 15 Mm , Cp Long Body Bib Tap 15 Mm , Bathroom Looking Mirror 600 Mm By 450 Mm , Cp Bib Tap Cp 15 Mm Dia , Cp Bathroom Water Shower 125 Mm Dia , Kitchen Shelving Plate Rack 24 By 24 By 10 , Curtain Rod Decorative Type 25 Mm Dia , Cp Swan Neck Movable Taps For Sink Wall Mounted , Health Faucet With Hook 1 Point 5 Mtr , Cp Bib Tap 15 Mm 2 In 1 , Cp 2 In 1 Angle Valve 15 Mm , Pvc Water Tank Cover Lid 500 Oblique1000 Ltr , Cp Angle Valve 15 Mm , Cp Towel Rail 450 Mm , Ewc Seat Cover Plastic , Cp Soap Dish , Helical Door Spring , Wall Mixer 3 In 1 With Hand Shower , Wire Mesh Galvanised Steel , Wash Hand Basin 550 Mm By 400 Mm , Cp Grating 100 Mm With Hole , Cp Stop Cock 15 Mm External Thread , Cp Waste Coupling 32 Mm , Ewc With S Trap , Door Handle Aluminium 125 Mm , Toilet Paper Holder , Pvc Bib Tap 15 Mm , Sliding Door Bolt Ss 150 Mm Long , Ptmt Pillar Cock 15 Mm , Ptmt Bib Tap 15 Mm , Plain Glass 1199 By 900 By 3 Mm , Curtain Bracket 25 Mm , Glass Pane Frosted 3 Mm Thick Of Size 4 Feet By 3 Feet , Kitchen Sink Coupling 4 Inch , Door Handle Aluminium 150 Mm , Float Valve Brass 20 Mm , Pvc Waste Pipe 32 Mm , Tower Bolt Aluminium 150 Mm , Glass Oil Putty , Door Stopper 200 Mm Long , Gate Valve 15 Mm Brass , Cp Stop Cock 15 Mm Enternal Thread , Tower Bolt Ms 200 Mm Long , Jet Spray For E Type Wc , Cp Urinal Spreader Male 15 Mm Dia , Cp 15 Mm Turbo Washing Machine Cock , Ss Connection Pipe 600 Mm Long , Sink Cock With Cp Flange With Aerator Spout Faucet , Led Flood Light 300 Watts , Led Street Light 70 Oblique 72 Watts , Led Lamp 11 Oblique 12 Watts , Led Flood Light 350 Watts , Led Flood Light 150 Watts , Led Street Light 25 Watts , Mcb Tpn 63 Amp , Led Street Light 30 Watts , Led Flood Light 240 Oblique 250 Watts , Led Flood Light 120 Watts , Led Lamp 9 Oblique 10 Watts , Cable Aluminum Armoured Xlpe Pvc Insulated 2 Core Into 10 Sqmm , Led Garden Light 25 Watts , Cable Aluminum Armoured Xlpe Pvc Insulated 3 Point 5 Core Into 35 Sqmm , Led Lamp 7 Watts , Led Lamp 5 Watts , Bollard Light 9 W , Mcb Sp 16 Amps , Mcb Spn 63 A , Mccb 630 A 50 Ka 3 P , Mccb 100 A 35 Ka Tpn , Led Post Top Lantern 30 Watts , Cable Almunium 2 Core Into 10 Sqmm , Led Flood Light 50 Watt Total Quantity : 6241

Contract Date: Ref. Documents Contract Value : ₹ 46.99 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 3

Maharashtra View Result →

40.

Defence #11344413 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 8

Arunachal Pradesh View Result →

41.

Public Administrative Department #11340731 AOC

Contract Date: Jun 30, 2026 Contract Value : ₹ 22.05 Lakh

Local Bodies No of Bidders 2

Tamil Nadu View Result →

42.

Petroleum and Natural Gas #11337544 AOC

Contract Date: Ref. Documents Contract Value : ₹ 2.94 Crore

Boards / Undertakings / PSU No of Bidders 3

Andhra Pradesh View Result →

43.

Housing Urban and Rular Development #11335412 AOC

Replacement Of Roofing And Misc.Works At Barrack No.13 At Old Hydrabad House , Nagpur (Only For Society) (2Nd Call).- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material uptoa distance of 50m.beyond the building area and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 2 Providing soling using80mm sizetrapmetalin15cm.layerincludingfilling voidswith Crushed sand/grit, ramming, watering etc. complete. 3 Providing and laying Castinsitu/Ready Mix cement concrete inM-10oftrap/granite/ quartzite/gneiss metal for foundation and bedding including bailing outwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishing if required and curing complete,with fully automatic microprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 4 Dismantlingbrickmasonryinlimeorcementmortarandstackingthematerilsasdirected with all leads, lifts etc. 5 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials,stacking the same as and where directed in the compound including scaffolding etc. complete. 6 Removing rafters from roof including the materials asdirectedwithallleads ,liftsetc. complete. 7 Removing purlins from roof including stacking as directed with all leads , lifts etc. complete. 8 Providing second class Burnt Brick masonry with conventional/I.S.type bricks in cement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 9 Providing and laying Castinsitu/Ready Mix cement concreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 11 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing,gussetplatesetc.asperdetaileddesignsanddrawingsoras directedincluding cutting,fabricating,hoisting,erectingfixinginposition, Makingriveted/bolted/welded connectionandone coat of anticorrosive paint andover it 2 coats of oil painting approved quality and shade etc. complete. 12 Providing Gas or Electrical welding for structural steel section, plates as per detailed drawing. For less than 10 mm thick section. 13 Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) 14 Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( withinorganic pigment). The paint shallhave atotal coating thickness ofnominal 35mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter- to-center.Theendribshallbedesignedforanti-capacitygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)600 mm girth (Surface Width). 15 Providing internal cement plaster 20mm thick in a single coat using Ready to use wall plasterto concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete.a) cement ratio 1:5 With Prior Approval of Concerned S.E. 16 Providing internal cement plaster 12 mm thick in a single coat using Ready to use wall plaster to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B. Masonry and concrete members complete.a) cement ratio 1:5 With Prior Approval of Concerned S.E. 17 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 18 Providing and laying Vitrified MATT finishhaving decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical andconfirmingtoIS15622-2006(GroupBla)ofapprovedmakeshadeandpatternfor flooringinrequiredpositionlaidonabedofbondingchemicalfillingjointscuringand cleaning etc .complete. 19 Supply & Fixing ofRock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick and required width wide in plain pattern includingCement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete. with prior approval of concerned Superitending Engineer. 20 PRIVIDING AND FIXING ANTIMICROBIAL ACOUSTICAL FALSE CEILING: Bioguard Mineral Fibre Acoustical Suspended Ceiling System with 19mm thick Acoustics Microlook 90 Edge Tiles with 15mm face exposed grid. The tiles shall have smooth bright laminated visual with Humidity Resistance (RH) of 99%, NRC 0.7 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 41db as per ASTM E1414, Light Reflectance ≥87% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of Class 0/1 as per BS 476 Part6/7 and Class A as per ASTM E 84with 19mm Square Tegular/Microlook 90˚ edge and 8mm drop in module size of 600 x 600mm./ 600x1200mm. The scrim on the face of the tile shall be cleanable, washable up to 500 cycle as per ASTM D-4828 and resistant to disinfectants. The tile shall be treated with Anti Microbial coating on the face of the tile to achieve cleanroom classification of class 5 (Class 100) as per ISO 14644-1 and suitable forzone 4 area having partical emission under normal conditions of ISO 5, Decontamination Class of CP10 and Bacteriological Cleanliness Class B1 for specific strains as per NF S 90-35:2003 The tile shall have a rating of 8 or above (face) for tests conducted for Resistance to growth of Mold in accordance to ASTM D3273. It shall be suitable for Green Building application, with Recycled content of 35% having VOC and Formaldehyde emission rate less than 0.1mg/m2/hr. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 15kg/m. 21 Transportation of material obtained from debris of various sorts excavated stuff including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed.( Beyond 10 Km. ) 22 Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction material for which royalty is necessary. Natural Sand 23 Testing Charges for Conducting BASIC TEST OF CEMENT.Standard ConsistancyFineness, Specific Gravity,Setting Time ( Initial & Final ), CompressiveStrength, Soundness etc. complete. 24 Testing Charges for Conducting BASIC TEST OF FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ),Silt & Clay Content 25 Testing Charges for Conducting BASIC TEST OF BRICKS Water Absorption (Set of 5 Bricks), CompressiveStrength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). 26 Testing Charges for Conducting BASIC TEST OfSTEEL BAR TESTING Upto 16 mm(Set of 3 Bars)

Contract Date: Jun 22, 2026 Contract Value : ₹ 18.51 Lakh

Government Departments No of Bidders 2

Maharashtra View Result →

44.

Agriculture #11333064 Technical Bid

instrument spares for refinery , 3 way manifold, pressure-0 to 120 kg/cm2, with all mounting studs and accessories. , air filter regulator, pressure 7 kg/cm2 make- precision , analog input card 8 channel for siemens make dcs part no. 331-1kf01-0ab0 make- siemens , analog ouput card 8 channel for siemens make dcs part no. 332-5hf00-0ab0 make- siemens , bagging machine controller for automatic bagging machine, make power build, model no c750 make- mettler toledo , chute lever sensor high temp. make- yu technologies pvt. ltd, , differential pressure switch, range – 0.2 to 6 bar, differential - .25 to 1.2bar, sensing element- copper alloy, elec. ranting- ac-1 : 10 a, 230v ac, make- wika , digital input card 32 channel for dcs part no. 321-1bl00-0aa0 make- siemens , digital output card 32 channel for dcs part no. 322.1bl00-0aa0 make- siemens , discharge valve for pan discharge, input/output connection – ¼” , double siphon pressure 120 kg/cm2, input/output connection : ½”: threaded , flow meter totalizer, model no. 1008s, input-4 to 20 ma make massibus , flow meter for imbibitions water flow, range -100 tph, line size 4” make- krhne marshall , chute level indicator cum controller, no of sensor 6, output-4 to 20 ma, input supply-230 vol ac make- yu technologies pvt. ltd, , k type thermocouple sensor length -400mm, sensor thickness-6mm, duel output connection, input connection-1/2” npt (m) make- temson , load cell for automatic bagging machine, capacity-110 kg , positioner for control valve i/p – 4-20ma, o/p- 4-20ma, make- ytc , pressure gauge range 0 to 160 kg/cm2, dial size 8 inch, input connection ½” (bottom) npt(m) making black & white back ground make- baumer , pressure gauge- range- 0 to 20 kg/cm2, dial size: 150 mm, input connection : ½” (bottom) npt (m), making : black & white back ground, with glycerin filled type make- baumer , pressure gauge- range- 0 to 4 kg/cm2, dial size: 150 mm, input connection : ½” (bottom) npt (m), making : black & white back ground, make- baumer , pressure gauge- range- 0 to 25 kg/cm2, dial size: 150 mm, input connection : ½” (bottom) npt (m), making : black & white back ground, with glycerin filled type make- baumer , pressure gauge- range- 0 to 10 kg/cm2, dial size: 150 mm, input connection : ½” (bottom) npt (m), making : black & white back ground, make- baumer , smart type pressure transmitter , input 0 to 120 kg/cm2, input connection ½” npt (m), hart enabled, with all mounting accessories. make- yokogawa/honeywell , pu tee, 8 mm x ¼” make- janatics , pu connector size dia, 8x ¼” make- janatics , pu connector both size flange size dia, 8x ¼” x 8x ¼” make- janatics , pu tube cap. dia 8 x ¼”, pressure-30 bar one roll-100 mtrs. make- janatics , rtd pt 100, sensor length – 400mm, sensor thickness-6mm, duel output connection, input connection- ½” npt 9m) make temson , sack grip belt for automatic bagging machine , seal kit for automatic bagging machine, model no. dnu 50, for bag clamp cylinder make- festo , seal kit for automatic bagging machine, model no. dnu 40, for course/fine cylinder make- festo , seal kit for automatic bagging machine, model no. dnu 40, for discharge cylinder make- festo , shuttle assembly for automatic bagging machine. make-festo , siemens s7 400 dcs backup batteries part no. 6es7971-0ba00 dc voltage- 3.6 vol make- siemens , single isolator input 0 to 1 amp. ac, output 4 to20 ma,(dual), input supply- 230 vol ac make- massibus , single isolator input 0 to 10 vol dc, output 4 to 20 ma,(dual), input supply- 230 vol ac make- massibus , single isolator input 4 to 20 ma, output 0 to 10 vol dc, (dual), input supply- 230 vol ac make- massibus , smps 24 vol dc source, input voltage: 110 vol dc/ 230 vol ac, output: 24 vol dc make- papper + fuchs , temperature gauge, spec- range 0 to 200 degree c, dial size 150mm, input connection: ½” (bottonm) npt (m), making : black & white back ground, sensor thickness – 6mm, capillary type, capillary length – 1.5 mtr. make- baumer , temperature gauge, specification range -0 to 150 degree c, dial size: 150 mm, input connection : ½” (bottom) npt (m), making : black & white back ground, sensor thickness-6mm, capillary type, capillary length-1.5 mtr. make- baumer , course feed cylinder, size 40 x 100 make- janatics india pvt. ltd. , bag clamp cylinder size 50 x 100 make- janatics india pvt. ltd. , fork 50 mm make- janatics india pvt. ltd. , cylinder back mounting 50 mm make- janatics india pvt. ltd. , cylinder back mounting 40 mm make- janatics india pvt. ltd. , fork 40 mm make- janatics india pvt. ltd. , bucket balancing plate make- janatics india pvt. ltd. , discharge cylinder size 40 x 160 make- janatics india pvt. ltd.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 7

Haryana View Result →

45.

Agriculture #11333050 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Cooperative No of Bidders 3

Haryana View Result →

46.

Educational and Research Institute #11326531 Technical Bid

Tender for Purchase Of Equipments For Mechanical Department , Purchase Of Equipments For Mechanical Department , Tail Stock Assembly ● Medium-Duty Tailstock Assembly For Dismantling & Assembly ● Quill Stroke: Minimum 75 Mm ● Taper: Mt-3 (Preferred Standard) ● Feed: Hand Wheel Operated ● Features: Set-Over Screws For Taper Turning ● Spindle Locking Arrangement ● Body: Cast Iron (Fg 260) ● Spindle: Hardened Steel , Working Model Of Fuel Supply System - Petrol Mpfi Type ● Petrol Multi Point Fuel Injection (Mpfi) System For Dismantling And Assembly Practice ● System Type: Non-Working / Cut-Section Model For Study Of Internal Construction ●Construction: Actual Automotive Components Or Equivalent Training Model Mounted On Frame ● Includes Throttle Body (Sectioned), Fuel Injectors, Fuel Rail, Intake Manifold ● Includes Fuel Pump, Fuel Tank (Dummy), Fuel Filter, Pressure Regulator ● Includes Ignition System Components: Ignition Coil, Spark Plug, Distributor (If Applicable) ● Ecu Module (Dummy/Display Type) With Wiring Layout Representation ● All Components Cut-Open, Painted, And Clearly Labelled ● Provision For Manual Demonstration Of Flow Path And Component Interaction ● Mounted On Rigid Ms Powder-Coated Frame ● Designed For Repeated Dismantling, Assembly, And Component Identification , Hydraulic Cylinder Bore Diameter: 50 Mm ● Stroke Length: 250 Mm ● Working Pressure: 160 Bar ● Cylinder Tube: Honed Steel ● Piston Rod: Hard Chrome Plated ● Seals: Standard Industrial Seals ● End Caps: Steel Supply: ● Mounted On Training Base ● Suitable For Dismantling And Inspection , Hydraulic Operated Directional Control Valves (Dcv) ● Type: Manual Spool Type Dc Valve ● Configuration: 4/2 Way ● Size: Ng06 (Cetop 3) ● Rated Pressure: 210 Bar ● Flow Capacity: 20-40 Lpm ● Body: Hardened Steel / Cast Steel ● Spool: Ground And Hardened ● Ports: Clearly Marked (P, A, B, T) Supply: ● Mounted On Training Plate ● Suitable For Dismantling And Study , Bearing With Shaft Assembly ● Type: Dismantling And Assembly Teaching Unit ● Shaft Diameter: 30 Mm ● Shaft Material: En8 Steel ● Bearings: Deep Groove Ball Bearing (6205 / 6206) ● Housing: Cast Iron ● Locking Arrangement: ● Circlips ● End Covers Mounting: ● Bench-Mounted / Frame Mounted Unit , Coupling Unit Using Driving And Driven Shafts Using Plummer Block Bearing Unit ● The Plummer Block Housing Material: Cast Iron (Grade Fg 200 Or Equivalent). Type: Sng Or Snl Series (Split-Type Housing). Sealing: Felt Seals Or V-Ring Seals (To Demonstrate Lubrication Retention). Lubrication: Provided With A Grease Nipple At The Top Center For Manual Lubrication Practice. ● The Bearing Type: Self-Aligning Ball Bearing (1200 Series) Or Spherical Roller Bearing (22200 Series). Bore Diameter: Standard 25Mm Or 30 Mm. ● Shafting And Coupling Shaft Material: Ground Carbon Steel (En8 Or En9) For High Surface Finish. ● Coupling Type: Flexible Coupling: To Demonstrate The Bearings Ability To Handle Slight Misalignment. ● Rigid Flange Coupling: To Demonstrate Traditional Direct Connection. ● Driving/Driven Setup: One Shaft Connected To A Small Electric Motor (Driving) And The Other To A Brake Drum Or Load (Driven). , 3D Printing Machine ● Build Volume(Wxdxh) 256 X 256 X 256 Mm³ ● Shell Enclosed (Plastic & Glass) Hot End All-Metal ● Nozzle 0.4 Mm Stainless Steel Included ● Max Hot End Temperature 300 ℃ ● Nozzle Diameter 0.4 Mm (Included) 0.2 Mm, 0.6 Mm, 0.8 Mm ● Build Plate Compatibility Textured Pei Plate, Cool Plate, Engineering Plate, High Temperature Plate ● Max Build Plate Temperature 100℃ ● Max Speed Of Tool Head 500 Mm/S ● Max Acceleration Of Tool Head 20 M/S² ● Supported Filament Pla, Petg, Tpu, Pva, Pet, Abs, Asa ● Chamber Monitoring Camera Low ● Rate Camera 1280 X 720/0.5Fps ● Time Lapse Supported ● Filament Run Out Sensor :Yes ● Control Board Fan Closed Loop Control ● Auxiliary Part Cooling Fan Closed Loop Control ● Air Filter Activated Carbon Filter

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 4

Tamil Nadu View Result →

47.

Public Administrative Department #11325175 AOC

Contract Date: Jun 22, 2026 Contract Value : ₹ 2.52 Lakh

Local Bodies No of Bidders 4

Chandigarh View Result →

48.

Water Resources and Irrigation #11319368 Price Bid

Tender for Supplying Installation Testing And Commissioning Of 90 Watt Led 6000K Asymmetric New Generation Energy Saving And Environment Long Life Versatile Pressure Die Cast Aluminum Ip66 Roadway Luminaries With High Power Led Light Source Complete Etc. As Required Housing Reflector And Enclosed With Toughened Glass Complete With All Accessories, Philips/Bajaj/Crompton/Halonix/Havells. , Repairing And Installation Of Exisiting Defective Street Light With Replacement Of Drivers, Retifier, Led Plate Etc. Complete As Required At Site. , Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc. In The Existing Trench, Complete As Required. A) 63 Mm Dia (Od-63 Mm & Id-51 Mm Nominal) , Supplying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Sheathed Aluminium Conductor Armoured Power Cable Of 1.1 Kv Grade Of Following Size Etc Complete As Reqd. A) 4 X 16 Sq. Mm , Supplying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Sheathed Aluminium Conductor Armoured Power Cable Of 1.1 Kv Grade Of Following Size Etc Complete As Reqd. B) 4 X 25 Sq. Mm , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. (I). 3X2.50 Sqm. , Supplying And Erection Of Flange Mounted Hot Dip Galvanized Octagonal Poles Of 8 Mtr. Height Made From 3Mm Thick Steel Plate Having Bottom Dia Of 130 Mm & Top Dia Of 70Mm Complete With Window With Flash Cover At The Height Of 2.00 Mtr From The Base Of Cable Termination Block Etc. And Galvanization Base Plate Of Size 250Mm X 250Mm X16mm Thick On Existing Cement Concrete Pedestal As Required Including Suppling And Fixing Of Laminated Sheet, Din Channel, Bus Bar And Earth Sheet 2 Nos. Welded At Suitable Height As Per Direction Of Enginer-In-Charge. 2 Nos. Washer, Nuts And Locking Arrangement Completed As Required (Make Bajaj/Volmont/Phillips/Lysaght/Consoul) , Supplying & Fixing Of Following Size Aluminium Thimble With Proper Connection And Pvs Tape Etc As Required. 16 Sqmm , Supplying & Fixing Of Following Size Aluminium Thimble With Proper Connection And Pvs Tape Etc As Required. 25 Sqmm , Fabrication Supplying And Installation Of Outdoor Type Cubical Feeder Pillar Of Suitable Size Not Less Than 30 Cm And Upto 45 Cm Deep Made Out Of M.S. Sheet 2Mm Thick (14Swg) Duly Compartmentalized Having 4 Strip Busbar Of 200 annual periodical maintenance Capacity Double Door With Locking Arrangements For Protection From Rain Dust Duly Fixed On M.S. Angle Iron Frame Work Of Size 50 Mm X 50 Mm X 6 Mm (Ns) 110 Cm Long Legs Out Of Which 50Cm Duly Grouted In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Agreegate 20Mm) Having Following Accessories Mounded Inside The Cubical Panel Including Connection Inter Connection/Soild With Aluminum Timbles Earthing With Two Nos. Earth Studs Duly Painted With One Coat Of Red Oxide And Two Coats Of Superior Quality Enamel Paint Completed Etc. As Required Having Also Compartment For Energy Meter. Supplying And Fixing Of Following Accesssories In The Existing Cubical Panel Board/Feeder Pillar Including Connection Testing Etc. As Required Having Also Compartment For Energy Meter Supplying And Fixiing Of Folowing Accessories In The Existing Cubical Pnal Board/Feeder Pillar Including Connection Testing Etc. As Required Incomer 125 annual periodical maintenance .35Ka Mccb With Thermal Release 1 No. Outgoing A) 63Amp - Dpmcb - 6 Nos. B) 63Amp - Elcb - 1 Nos. C) C.T. Opetrating . D) Tongal Switch E) Voltmeter 0-5000 Volts 96 Sqm Flush Type With Selector Switch F) Ampere 0-100/5 Sqmm Flush Type With Selector Switch & 100/5 annual periodical maintenance Ratio Cts G) Indication Lamp (Ryb) With Control 3 Pole (Ml-6) 95 annual periodical maintenance H) Power Contactor 3Pole (Ml-6) 95 annual periodical maintenance I) Auto Timer Rex Modular D41 Model Mds Make J) Danger Notice Plate. , Supplying And Drawing Following Sizes Of Pvc Sheathed & Xlpe Insulated Al. Conductor Multicore Unarmoured Cable Of 1100 Volts Conforming To Is 7098 (Part 1) 1988 With Upto Date Amendments In The Existing Panel Ets As Required.. A) 3 Core 4 Sq.Mm , Supplying And Fixing 4 Nos. 16 Mm (Minimum) Dia X 650 Mm(Minimum) Long Gi Foundation Bolt (En8grade) With Nuts, Washer Including 2 Nos. Template Of 3 Mm Thick Size 200 X 200 Mm. With 4 Nos. 20 Mm. Dia Holes (Or Suitable For Existing Holes), To Match With Pcd Of Pole Base Plate As Required. , Fabricating, Supplying And Fixing Of Wire Mesh Protection Frame Work Fabricating With 40 X 40 X 6 Mm Thick Angle Iron/Tee Iron Having Intermediate Members Of Size 25 Mm X 6 Mm (Gi Wire Should Be 6Swg) Flat Strip Welded At 30 Cm In Each Sections & Duly Welded With Hard Drawn Wire Fabric Mesh Of Size 25 Mm X 75 Mm Having Weight Not Less Than 7.5 Kg/Sqmtr. And Making Main Door Gate Provided With Two Nos. Sliding Bolt With Godown Locks With Operating Hadle Welded From Inside Of The Door I/C Providing And Fixing Of Four No. Legs Of Same Angle Size Of 90 Cm Length Duly Grouted In Foundation (30 X 30 X 45) Cm (Deep) In 1:2:3 Cement Concrete & Painting With One Coat Of Red Oxide & Two Coat Of Super Synthetic Luminous Paint Of Approved Colour And Quality Etc.Complete As Reqd. {Area Of Hard Drawn Wire Fabric With Angle (Except Legs) Shall Be Measured For Payment} , Fabrication, Designing, Supplying & Fixing Of 1000 Mm Long Double Arm Bracket(Thickness Minimum 3Mm) Over Hang With Tightening Bolt Etc. As Per Design Approved By Engineer-In-Charge. , Providing And Fixing Of Locking System Of Street Light Including Pole Door For Safety Cover Plate Of M.S Sheet Including Weilding, Nut-Bolt Etc. And Painting Of Door Cover Plate With Synthetic Enamel Aluminium Paint. , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- 63 annual periodical maintenance - Dpmcb , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- 125 annual periodical maintenance Tpn , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- 63 annual periodical maintenance - Mccb , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Ct Operating , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Tongal Switch , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Power Contactor 3 Pole (Ml-6) 95 annual periodical maintenance , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Ampere 0-100/5 Sqmm Flush Type With Selector Switch & 100/5 annual periodical maintenance Ration Cts , Supplying, Installation, Testing And Commissioning Of The Following Material Required For Existing Feeder Panel Including All Accessories For Connetion Etc As Per Site Requirement:- Timer Into The Existing Street Light Panel Box Including All Accessories For Connection Etc. As Per Site Requirement. , Providing And Laying In Position 1:2:4 Reinforced Cement Concrete Foundation Of Size 500 Mm.(L) X 500 Mm. Wide And 1200 Mm. Deep I/C Excavation Of Earth In Hard Rock, Providing Cutting, Bending And Placing In Position, Steel Reinforcement Of Cold Twisted Bars Of 12 Mm. Dia- 1300Mm Long (Approx)- 8 Nos. And Reinforcement Ring Of Cold Twisted Bar Of 8Mm Dia - 2000Mm (Approx) - 10Nos. (With Equal Spacing) For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete As Required With Positioning Of Foundation Bolts (As Per Item Below) And Providing 63 Mm. (O.D) Dwc, Hdpe Pipe Minimum 1 Mtr. For Cable Entry & Exit As Required. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level A) 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) : 6 Graded Stone Aggregate 20 Mm Nominal Size) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. A) Upto 35 Sqmm , Repairing Of Defective/Faulty Cable Connection Inside The Pole Window And Underground Cable By Making Connection With Suitable Size Pvc Insulated Copper Wire, Connector Plate, Thimble And Taping With Insulation Tape For Existing 5 Mtr. To 12 Mtr. Height Gi Pole I/C Testing & Commissioning Etc. Complete As Required At Site , Laying Of Al. Conductor Armoured/Unarmourd Power Cable 1.1 Kv Between Pole To Pole With The Help Of Tower Wagon, Including Supplying Of 10 Swg Gi Wire, In Following Manner, A) Upto 3.5X35 Sqmm. Overhead Tied With Suitable Size Schakle Clamp And Insulator , Painting By Double Coating Aluminium Silver Paint Of Street Light Poles Of Height 8 Mtr Sizes I/C. Pole Brackets Of Various Designs After Cleaning And Scrabbing Of Poles For Removing Of Any Posters/Rusts If There To Give Even Shade Etc. As Reqd. , Earthing With G.I. Earth Pipe 4.5 Meter Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal/ Coke And Salt As Required. , Supplying And Laying 25Mm X 5Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt,Spring,Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) , Excavation For Cable Trenches In Soft Soil, Depth Upto 1.2 M Including Dressing Of Sides Lift Upto 1.5 M, Including Getting Out The Excavated Soil, Refilling With Sand And Or Good Soil After Laying Of Cable/ Pipe Etc In Layers Of 20 Cm, Ramming, Watering And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 Metres. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required , Deployment Of Hydra Crane With Boom Lift Cage Bracket Or Other Arrangement Of Required Capacity With Fuel And Driver Fro Fixing/Removal/Replacement Of Lights Mounted On Pole, Bracket, Electric Wiring Pole, Pole Window Accessories Etc. As And Required As Per Direction Of Engineer In Charge. , Deployment Of 01 No. Skilled/Wiremanm And 01 Nos. Unskilled Worker/Helper For Day To Day Maintanence, Repairing And Watch &Ward Of The Street Light On The Bundh Roads From Dhansa To Jhatikra For 01 Year Of I&Fc Deptt. , Deployment Of 01 No. Skilled/Wiremanm And 01 Nos. Unskilled Worker/Helper For Night Shift For Maintanence, Repairing And Watch &Ward Of The Street Light On The Bundh Roads From Dhansa To Jhatikra For 01 Year Of I&Fc Deptt.

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 2

Delhi View Result →

49.

Defence #11315637 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Statutory Bodies & Commissions/Committees No of Bidders 8

Arunachal Pradesh View Result →

50.

Public Administrative Department #11312997 Price Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 2

Tamil Nadu View Result →

TenderDetail

Loading tenders