View Bid Results For Non Conventional Coach Tenders

We found 19 Bid Results related to non conventional coach tenders. You can find Contractor details who won non conventional coach tenders along with contract details in Bid awards announcements section.

Indian Tenders
99
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
19
Tender Publishing Platform
19
State / UT
8
8
4
2
1
1
1
1
1
Contract Value
12
6
1
Publish Date
0
0
0
0
0
Sector
2
18
1
Ownership
2
18
1
Within keyword
Active filters:
Showing 1–1 of 19 tenders matching your filters
West Bengal View Result →
West Bengal View Result →
3.
Railways #9671025 AOC
Supply Of Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches Etc.Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches Etc.,Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except I Cf Built Ac Coaches) And Non Ac Lhb Coaches, Passenger Area (Cabin) For Conventional And Lhb Non A C Coaches And Conventional Non Ac Chair Car (Day Coach). Type-B 1 (9 W), As Per Rdso Specification No. Rdso/Pe/Spec/Tl/0091-2016 (Rev.1)And Rcf Drg. No.Cc76453 Along With Rcf Annexure-1,2,3 [ W Arranty Period: 72 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]
Contract Date: Feb 25, 2026 Contract Value : ₹ 3.73 Lakh
Government Departments No of Bidders 1
West Bengal View Result →
4.
Defence #9014766 AOC
Tender For Comprehensive Maintenance Of Building No P-100 At Ahrr Under Ge Em Rr Hosp.; 1 Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. 2 M&L for dismantling stone slabs and tiles of any description or thickness in floors, aprons etc 3 Demolition of brick work built in cement mortar including all quoins, arches, pillars, drain and culvert in foul condition etc.complete all as specified and directed . 4 Demolition of Reinforced Cement concretein roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed . 5 Demolition of cement concrete unreinforced( in ground floors and paving at any position 15 cm thickness (below or above ground level) complete all as specified and directed . 6 M & L for glazed ceramic coloured tiles 300X450mm/600x300x7 to 8 mm thick in dado/skirting of any colour using polymer based chemical adhesive laticrete 307/315/325, as per manufacturer instructions over prepared surface incl joint filling with grout setand jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified. 7 M & L Non skid coloured ceramictiles 7-8 mm thick (sqm/rect) area of each tiles exc 0.11 sqm but n exc 0.18 sqm, in floors etc. of any colour using polymer based chemical adhesive laticrete 307/315/325, as per manufacturer instructions over prepared surface incl joint filling with grout setand jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified. 8 M & Lcoloured ceramictiles 7-8 mm thick (sqm/rect) area of each tiles exc 0.18 sqm but n exc 0.38 sqm, in floors etc. of any colour using polymer based chemical adhesive laticrete 307/315/325, as per manufacturer instructions over prepared surface incl joint filling with grout setand jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified. 9 M & L Non skid coloured ceramictiles 7-8 mm thick (sqm/rect) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, in floors etc. of any colour using polymer based chemical adhesive laticrete 307/315/325, as per manufacturer instructions over prepared surface incl joint filling with grout setand jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified. 10 M & L forvirified tiles 8-9 mm thick (sqm/rect) polished, area of each tiles exceeding 0.36 sqm, but not exc 0.42 sqm in floors and skirtings etc. of any colour using polymer based chemical adhesive laticrete 307/315/325, as per manufacturer instructions over prepared surface incl joint filling with grout setand jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified. 11 M&L for vitrified tiles shade 8-9 mm thick (sqm/rect) polished, area of each tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm, in floors etc. of any colour using polymer based chemical adhesive laticrete 307/315/325, as per manufacturer instructions over prepared surface incl joint filling with grout setand jointed in neat cement slurry and pointed in coloured cement to matchcomplete all as specified. 12 M & L for20 mm thickgranite of any type (table rubbed & polished) in jambs, pillars, window cills, plate formsin CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed . 13 M & L for 20-25mm thick, machine cut, Kotastone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:6 complete all as specified. 14 Dismantling of wall and ceiling boards of any description, any thicknes including cover fillets and frame work complete all as specified. 15 S & F solid PVC wall panelling consisting of 5mm thick wood grain finish PVCsheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified. 16 S & FPVC louvers thisckness 6mm wall panelling and ceiling any colour or pattern as designed fixingarrangement like fillate cleat back framing etc and side beadingsas per specifications and drawing complete all as specified. 17 S & Ffor 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. 18 S & F solid PVC leeping of 2mm thick wood grain finish PVCsheet is heat bent as lipping on the edges of doors, windows& other edges inclusive of solvent cement and fixing at sitecomplete all as specified. 19 M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 600 x 600mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good of distrubed wall surfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as directed. 20 M&L forMetal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile,duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 600 x 600mm size, complete all as directed. (Note : The grid /frame shall be measured and paid for separetly.) 21 Supply & fixing of false ceiling in step (s)/any level/design/pattern comprising of 12 mm thick Gypsum boardincluding GI frame work for seamless ceiling made of GI perimeter channel0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 M length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including two coats of plastic emulsion paint complete all as directed.(Note: The measurement shall be taken as clear span from wall to wall) 22 S&F powder coted Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specifiedall as specified and as directed. (Cost of sheet glass Plain / frosted / ACP Sheet shallbe measured and paid seprately ) 23 Taking down chowkhat or frames with shutter (withouttaking off shutter from frame) area exc 1.50 Sqm but n. Exc. 4.00 sqm complete all as specified and directed . 24 S&F, aluminium powder coated chowkhats of 100x44x1.5mm section with rebate complete frame 25 Supply only 5.5 mm thick plain glass fixed with beading in aluminium frame all as specified. 26 Supply only 3mm thick aluminium composite panel (ACP Sheet) to aluminium frame all as specified. 27 S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40mm x 19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.3mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 125mm and locking arrangements with each moving leaf all as specified. 28 Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2 mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor including cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) 29 Providing and fixing factory made uPVC white colour partially fixed and openable(size & opening as directed) window made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm),T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2 mm thick galvanised steel Frame (28mm x 21.5mm) T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, -5mm thick glazing with selected quality glass(Note: The unit rate quoted by contractor including cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) 30 S&F in repair powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws etc complete all as specified and as directed. (Cost of sheet glass Plain/frostedshall be measured and paid separately). 31 Dismantling of boarding any description, fixed in any position with nails complete all as specified. 32 S&F aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and panel of ACP sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangement for bottom and top member of aluminium frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed. (Note : Cost of ACP sheet or prelaminated board and sheet glass shall deemed to beincluded in the rate quoted for this item ) 33 Providing and fixing in repair aluminium composite panels cladding of approved make having total thickness of 4 mm (Top coil -0.5mm , non Toxic PE - Core - 3 mm and back Coil -0.50 mm ) with 25 micron PVdF Coating on top coil and polyester / epoxy coating on back coil ( 4-7microns ) on aluminium substructure fixed with 19 mm x 12 mm x 1.6 mm aluminiumcleat & 10 x 100 mm SS Wooden screw with PVC plug on faced horizontal/ vertical surfaces of rectangular / circular columns ,suspended ceiling Cills , jambs ,canopywith including neccessary aluminium frame ,scafolding etc and making 12 mm to 20 mm wide grooves and applying non staining and non streaking sealant of Dow corning ( 789 or 991 HP) and backing rods complete as specified and approved shade by Engr in charge . Only exposed surface shall be measured and paid for ACP Material shall be for exterior application &of shade as approved by Garrision Engineer . 34 S&F in replacement toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc incl all kind of SS patch fitting & fixture, spider patch etc, (excluding handle, lock and floor spring)complete all as directed. 35 S&F of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed. 36 S&F of repaire SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed. 37 S&F of SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed. 38 S&F for double actionfloor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloysheet foundation box,main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed, complete all as directed. 39 S&F for in repair double actionfloor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloysheet foundation box,main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed, complete all as directed. 40 Dismantling Asbestos cement(corrugated, semi-corrugated etc.) sheets in roof covering complete all as specified and directed . 41 S&F prepainted galvalume aluminium zinc coating GI basedcorrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . 42 S&F Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap with coach screw & washer in roof, wall etc. of 2mm thick. 43 S&F Plain, galvanume aluminium zinck coated sheeting, in ridges, hips, valley gutters, drip & straight flashings (length & girth as fixed) of class 0.50mm thick of colour having tensile strength of 550Mpawelded or soldered joints are provided 44 S&F PVC 18/19mm thick PVCsolid board ,one side prelaminated for cabinets boxes shutters,etc with shelf and shutters full size fitted under/above kitchen cooking platform and other platform complete all as specified. 45 S&F 100 mm size stainless steel handles, matt finish, complete all as specified and directed .. 46 S&Fbrass two leverskeys,Locks, cupboard,grade I, size 50mm suitable for cup board door/drawer , complete all as specified and directed . 47 Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc. 48 M&L for 15 mm thick readymix platering in cement mortar having ratio equivalent to CM 1:6on brick work or concrete surfaces of wall and finished the surfaces even and fair as awhole or in patch work all as specified and directed. 49 M&L for preparation of newly plastered wall surface & applying two coats of distemper oil emulsion over a coat of 1.5mm thick wall care putty (Note: Applying emery paper to achieve smooth finish). 50 M&L for complete removal of existing treatment on walls surfaces and applying two coat of wall care putty 1-2mm thick and preparing the surface with fine emery paper to achieve smooth surface, complete all as specified and directed. 51 M&L for prepration of old plastered wall surface applying two coat of oil bound distemper with roller on old wall surfaces complete all as directed. 52 M&L for preparation of old wooden surfaces of any description over 10 cm width or girth, applying two coats of synthetic eanmel paint .complete all as specified and directed . 53 M&L for applying two or more coats of French polishing on old wooden surfaces of any description/size with andincluding cleaning and preparing the surface including a coat of wood filler,complete all as specified and directed .. 54 S & F in repair for door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg 55 Taking down of shutter of any description exc 1.0 sqm but n exc 2.00 Sqm each. 56 Taking down chowkhat or frames with shutter (withouttaking off shutter from frame) area n exc 1.50 Sqm.complete all as specified and directed . 57 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to he stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing. 58 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain/coloured colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing 59 S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded coloured PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 60 S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides withdecorative or lamination face veneer on both faces with lipping/frame to match complete all as specified and directed .. 61 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of sizeFrame size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). 62 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick including edge bend comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges shall be paid separately) 63 S&F Stainless Steel butt hinges 100mm size complete all as specified and directed . 64 S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing boltsand sliding bolts of extruded sections or cast aluminium complete all as specified and directed .. 65 S&F aluminium anodised barrel tower bolt 200mm long extruded section all complete all as specified and directed . 66 S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified and directed .. 67 S & F Solar control film 25micron reflective type sticked to glass panes exc. 1.5 sqm as per instruction of manufacturers complete all as specified. 68 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified. 69 S & F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified. 70 S & F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl taking down complete all as specified. 71 S&F PVC (SWR) bend/shoes 110 mm dia fixed in position complete all as specified and directed .. 72 S&F in repair PVC (SWR) bend/shoes 75 mm dia fixed in position complete all as specified and directed .. 73 S&F160mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed . 74 S&FPVC (SWR) bend/shoe 160 mm dia fixed in position complete all as specified and directed .. 75 S&F50 mm bore PVC pipe (SWR) single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed . 76 S & F in repair stainless steel curtain rod 20-22mm dia thick 1mmincludingbrackets, side knobs incl fittings fixed to wall complete all as specified and directed. 77 S&F in repair venatian blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed . 78 S&F in repair zebrablinds made out of fabric cloth or as required ofapproved shade fixed as per the instructions of manufacturers, complete all as specified and directed . 79 Material & Labour for providing and fixing stainless steel (Grade 202) railing of any design/pattern made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed . 80 S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as directed. 81 S & F for Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed . 82 S & F in repair 1mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified and directed . 83 M & L for RCCtype B1 1 : 2 : 4 (using 20mm graged stone agg) work cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair finishes complete all as specified and directed . 84 M & L for Mild steel TMTbars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, Chajjas hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed . 85 Fair finished flat form work to Chajjas, water troughs and similar items including edges complete all as specified and directed . 86 Fair finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.complete all as specified and directed . 87 M&L for brick work with sub class B bricks old size, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed .. 88 M&L for brickwork with sub- class ‘B’ bricks old size, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. 89 M&L for complete removal of existing treatment and applying 1.5mm thick putty to achieve even and fair surface followed by two coats of distemper oil emulsion complete all as specified and directed. 90 M&L PCC1:5:10 type E-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified and directed . 91 M&L forrendering 15 mm thick in CM 1:4 on brick or concrete surfaces using integral water proofing compound (3% by weight) for floor and sides of wall complete all as specified and directed 92 M&L forsealing of pipe penetration of toilets core cutting & sunken slab atment in following stages:- Supply and apply solvent free,moisture insensitive epoxy resin based patch repair putty Sikagrade-694F (I) ,yield : 0.6ltr/kg suitable for submerged condition having compressive strength of 40N/mm2(1day) ccording to IS 9162-1979 on pipe penetration surface.The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joints to concreteetration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementtitious coating system as Top coat : Sika Top Seal -107@ 1.5kg/m2 over reinforcement : Sika Fab-1 over base coat :Sika Top seal-107 @ 1.5kg/m2 etc all as specified and directed.System should have compressive strenght:20N/mm2: bond strength :2.0N/mm2 complete all as specified. Note : (i) Entire work shall be carried out through Manufacturer or this authorised representative.(ii) The contractor shall furnish a 10years warranty for fectiveness of waterproofing treatment and the period shall be reckoned from the next day of actual date of completion of work .(iii) An amount of 2.5% of total quoted amount against this item shall be retained out of the final bill amount as security deposit,against 10years water proofing effectiveness and the same shall be released only after the expiry of guarantee period.The contractor may also furnish fixed deposit receipt/BGB in lieu of the sum to be retained as security. 93 M&L for 40 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring without usingextra cement complete all as specified and directed . 94 Takingup or down tubing GI 15 mm dia incl all fittings complete all as specified 95 -Ditto all as per item No. 79 above but 20 mm bore GI Pipe. 96 Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 97 S&F 20mm dia GI pipe medium grade including all fittings fixed to wall or floor as specifide and directed. 98 M&Lcutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed . 99 S&F in repairs gun metal, globe orgate valve with iron wheel, screwed both ends for iron pipesuitable for 15 mm bore iron pipe complete all as specified and directed. 100 S&F in repairs gun metal, globe orgate valve with iron wheel, screwed both ends for iron pipesuitable for 20 mm bore iron pipe complete all as specified and directed. 101 S&F in repair vitreous chinawash basin, white colour, flat back type, of approx size580 x 450 mm including waste coupling, wall bracket, waste pipe of suitable size etc,complete all as specified and directed. 102 S&Fin repair Vitreous China Urinal, full stall type, white (excluding flushing cistern, waste coupling, flush pipe and waste pipe) Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed in repairs etc,complete all as specified and directed . 103 S&F in repairPlastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,all as specified and directed. 104 S&F in repairwhite colour,vitreous china washdown water closet pan (pedestal pattern) fancy type(excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed ... 105 S&F in repairwhite colour, vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed . 106 S&F in repair 10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor.complete all as specified and directed . 107 S&F in repair 10 liters PVC valve less syphonic action type flushing cistern, twin flush concealed cistern without top push knob (suitable) for all wall hung WCs complete all as specified and directed. 108 S&F in repairs 15 mm dia chromium plated shower rose 125 mm size with CP arms for shower complete all as specified and directed. 109 S&F in repair 15mm dia PVC connection 45 cm long, complete all as specified and directed . 110 S&F in repair long body bib cock, 15 mm bore with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed . 111 S&F in repair fancy type Pillar taps 15 mm cast copper with capstan heads chromium plated screwd down high pressure with or with out lettred hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.but fancy type complete all as specified and directed . 112 S&F in repair of wash basin mixer, without pop up waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mmbore pipe, complete all as specified and directed . 113 Supply and fixing in repair toilet paper holder chromium plated complete all as specified and directed . 114 S&F in repair of angular stop cock/ angle valve 15 mm bore with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed .. 115 S&F in repair of PVC angular stop cock/ angle valve 15 mm bore with wall flange complete all as specified and directed). 116 S&F in repair of PVC bib cock, 15 mm bore with wall flange complete all as specified and directed . 117 S&F in replacement of PVC Pillar cock 15 mm bore with wall flange complete all as specified and directed . 118 S&F in repair chromium plated towel rail 20mm dia and600 mm long complete all as specified and directed .. 119 S&F in repair CP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed . 120 S&F in repair of 2-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed . 121 S&F in repair of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed .. 122 S&F in repair of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified and directed .. 123 S&F in repair PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as specified and directed .. 124 S&F CP soap dishfixed in repairs complete all as specified and directed . 125 S&F 32mm dia and suitable length of PVC waste pipe including tail for WHBetc, complete all as specified and directed .. 126 S&F 40mm dia and suitable length of waste pipe including tail forStainless Steel sink etc, complete all as specified and directed .. 127 S&F SS glossy finish grating of square shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and including fixing with cement mortar to floor/nahani traps etc, complete all as specified and directed . 128 S&F SS glossy finish grating of 100 mm dia size with or without hole and including fixing with cement mortar to floor/nahani traps etc, complete all as specified and directed . 129 S&F in repair sinks with drainage board made of stainless steel 0.80mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed . 130 M & L in repairs for Castiron floor trap of 75 mm outlet plain including jointing to waste pipe in run lead fixed in cement mortar complete all as specified and directed .. 131 S&F 100mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length fixed with cement joints fixed to walls, complete all as specified and directed .. 132 S&F in repairs 100mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears fixed with cement joints laid in floors or in trenchescomplete all as specified and directed .. 133 S&F 75mm bore cast iron soil waste and vent pipe (spunpipes) in any length with or without ears with cement joints laid in floors complete all as specified and directed . 134 S&F for 75mm borecast iron soil waste and vent pipes (sand cast pipes) in any length with cement joints fixed to walls,complete all as specified and directed .. 135 S&F for 100mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type)with parallel branches complete all as specified and directed . 136 S&F cast iron bends,Tee(any radius) diminishing pieces or tapers (larger bore measured) of 100mm bore of pipe fitted with oval access doors complete all as specified and directed .. 137 S&F cast iron P trap or S trap of 100mm sizefixed with laid joints laid in floors, complete all as specified and directed .. 138 S & F in repair ofstack clamps made outflat iron andround iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed . 139 S & F in repair of Aluminium alloy wire cloth,0.36mm nominal dia ofwire and average width of aperture1.40mm and fixed with aluminium wire staples complete all as specified and directed .. 140 S & Fin repair stop/ angle valve cast copper alloy CP 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified 141 S&FGlass wall corner with wall bracket and fixing accessories complete all as specified and as directed 142 S&F in repair towel rail600mm long(make -Jaquar Cat No AQN-7711 as approved) 143 S&F in repair Toilet roll holder (make -Jaquar Cat No AKB-7753as approved) 144 S&F in repair towel ring round (make -Jaquar Cat No AQN-7721 as approved) 145 S&Fsoap dish (make -Jaquar Cat No AQN-7731as approved) 146 S&Fin repair Jet Spray (health Faucet) with 1M long flexible tube with wall hook Chrome Plated. 147 S&F in repair two way bib cock with wall flange (make -Jaquar Cat No ORM-10041as approved) 148 S&Fin repair angular stop cock (make -Jaquar ) 149 S&F in repair braided hoses 450mm long (make -Jaquar 150 S&F in repair pillar cock Chrome Plated (make -Jaquar ) 151 S&F in repair bib cock(make -Jaquaras approved) 152 S&F in repair Shower (Square) size 240X240MM(make -Jaquaras approved) 153 S&F of white colour,vitreous china washdown water closet pan ( wall mounted Composite pattern) fancy type including built in vitreous china flushing cistern dual flush type of capacity 10 litres including PVC white seat cover, complete all as directed.( Make :Hindware / Jaquar). 154 S&F in repair polished edge mirror 6mm thick selected quality glass, fixed on wall including fixing studs etc complete. 155 S&F in repair of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mmbore pipe, complete all as specified.Make : Jaquar/Prayag/ Hindware.(make -Jaquar as approved) 156 S&F in repair of 3-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as directed. Make :Hindware / Jaquar (make -Jaquar as approved) 157 S&F in repair bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified. ( Make Jaquar). 158 S&F Stainless Steel wall mounted foldable support toiletGarb Baroverall size of 600mmx35mmx80mm (min size) complete all as directed. Make:- DOLPHY 159 M&L for wooden flooring, laminated wooden type made of high density fibre board (HDF), comprising of tongue and groove interlocking type of planks of 1210 x 193mm size 8mm thick, commercial grade, abrasion resistance of AC-III category, with and including all fixing material i.e chemical adhesive, base strip /fillets etc veneered and matching top beading etc all as directed. 160 M&L Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated) Fe-290, Gde E-165 161 Supply, fixing and fabrication steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 162 M&L for PVC profile for wall panelling of size 23cm wide, 8mm over all thick and 01mm wall thickness fixed with screw to mild steel tubular steel frame work made out of MS Hollowsection of size 25mm x 15mm x 2mm spacing 01 meter on both side frame work shall be fixed in wall with the help rawl plug and required length of screws and MS work shall painted with one coat of red oxide primer for wall paneling complete all as specified and as directed. 163 M&Lfor Preparation of old surfaces plastered or unplastered and applying one coat ofweather proof exterior paint upto & 5 storyed high building complete all as specified and directed. 164 S&F bloss glass frosted Paper Self-Adhesive Window Film Shower Waterproof glass Covering(17.7 Wide by 78.7 Long) for Privacy purpose complete all as specified and directed. 165 S&f CP waste jalli 100mm dia complete all as directed. 166 S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm when open. 167 S&F in repair soft closing clip on hinge, full / half overlay type, of stainless steel suitable foe 18/19 mm thick board, complete all as specified and directed. 168 S&F in repair 30mm dia, chromium finished knobs fixed with screws, complete all as specified and directed . 169 S&F hat and coat hooks, brass solid body, 175mm to 250 mm complete all as specified. 170 S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as directed. 171 S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers 172 M&L for 1.5mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors 173 S&F in repair stainless steel wall mounted support toilet grab bar vertical swing (400mm x 35mm) or foldable of size (605mm x 100mm x 35 mm dia) including fixing accessories complete all as specified and directed. 174 Mirror pollishing onkota stone/marbal where ever required to give high gloss finish complete all as directed by Engineer in charge.Note:-Complete work Grainding,Cleaning,washing as per Direction and site requirement. 175 S&F in repair for 1mm thick sunmika of any colour design pattern or plain as required at sitefor doors and cupboard including chemical for fixing complete all as directed. 176 S&F peg of 6set of cromium plated complete all as specified and directed. 177 S&F aluminium Deco grill with powder coating (minimum thickness of powder coating 50 micron), 7.5 mm size DG-102, fixed to E/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes, complete all as specified and directed. 178 S&F magnetic catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions complete all as specified and directed. 179 S&F of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified 180 M&L18 mm thick MDF board with both side laminated fixed with SS screws as in cupboard and cupboard shutters including leeping/beading fancy type and polish of the same 0.9 mm thick decorative laminate type 1,of surface finish, colour and other side white colour etc, complete all as specified and as directed. Make : Greenlam / Century ply / Royale Touche 181 S&F Chequered cement concrete tiles 20cmx20cmx20cm thick with grey cement & pigment machine preshed set jointed & pointed in neat cement slurry in floor & cut & polished over mm thick screed bed in CM (1:6) 182 S&F Paver tiles 300x300mm 12mm thick with grey cement & pigment machine preshed set jointed & pointed in neat cement slurry in floor & cut & polished over mm thick screed bed in CM (1:6) 183 Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan / plug / bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof / wall / floor by applying putty and applying colour / white wash finish complete all as specified and directed. 184 M & L for point wiring of concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including PVC conduit of suitable dia, complete with all conduit accessories, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate / hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. (a) One light/fan/bell/exhaust fan point controlled by one switch. 185 (b) One 3 Pin socket outlet 5 Amps on Independent board. 186 (c) One 3 Pin socket outlet 5 Amps on same board. 187 (d) One light point controlled by two, two way switch 188 All as per srl item No. 184 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point. 189 M & L for point wiring of concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing in existing conduit, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. (a) One light/fan/bell/exhaust fan point controlled by one switch. 190 (b) One 3 Pin socket outlet 5 Amps on Independent board. 191 (c) One 3 Pin socket outlet 5 Amps on same board. 192 All as per srl item No.189 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point. 193 M & L for point wiring of concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing in casing & caping, GI metal flush box of suitable for modular / conventional switches / sockets / fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates. (a) One light/fan/bell/exhaust fan point controlled by one switch. 194 (b) One 3 Pin socket outlet 5 Amps on Independent board. 195 (c) One 3 Pin socket outlet 5 Amps on same board. 196 All as per srl item No.193 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point. 197 S & F in replacement of Modular Switch 16 Amp, 1 Module, single pole one way, ISI marked complete all as specified 198 S & F in replacement of Modular Socket 6 / 16 A - 2/3 Pin combined 2 module complete all as specified and directed 199 S & F in replacement of Modular Switch 1 way 6 /10 A, 1 Module complete all as specified and directed. 200 S & F in replacement of Modular Socket 6 / 10 A - 2 / 3 Pin combined 2 module complete all as specified and directed. 201 S & F in replacement of Modular Switch 2 way 6 / 10 A, 1 Module complete all as specified and directed. 202 S & F in replacement ofModular Bell push 6A 1 module , 240 Volts complete all as specified and directed. 203 S & F in replacement of Modular fan regulator step type, 120W, 240 V, complete all as specified and directed. 204 S & F in replacement ofCeiling rose surface Polycarbonate type with three terminals 240 Volts complete all as specified and directed. 205 S & F in replacement of Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, 240 Volts, complete all as specified and directed. 206 S & F in replacement ofBell Ding Dong, 240 Volts complete all as specified and directed. 207 Material and labour in replacement of Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB incl removing old sub main complete incl cutting chases etc all as specified and directed.Note :Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor. 208 Material and labour in replacement of Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB incl removing old sub main complete incl cutting chases etc all as specified and directed.Note :Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor. 209 Material and labour in replacement of Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit of suitable size, complete with all PVC accessories and 2.5Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB incl removing old sub main complete incl cutting chases etc all as specified and directed.Note : Cutting chases required for sub main wiring shall be finished with cement mortar 1:4 and surface shall be matched with existing shade of surface shall be deemed to be included in the unit rate quoted by the contractor. 210 Material and labour in replacement of Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in existing PVC conduit or new casing & caping of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall and removing old sub main complete all as specified and directed. 211 Material and labour in replacement of Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in existing PVC conduit or new casing & caping of suitable size, complete with all PVC accessories and 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall and removing old sub main complete all as specified and directed. 212 Material and labour in replacement of Sub main wiring with 2 run of 2.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in existing PVC conduit or new casing & capingof suitable size, complete with all PVC accessories and 2.5Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall and removing old sub main complete all as specified and directed. 213 Material and labour in replacement of Sub main wiring with 4 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit / casing & caping of suitable size, complete with all PVC accessories and 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall all as specified and directed. 214 Material and labour in replacement of Sub main wiring with 4 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit / casing & caping of suitable size, complete with all PVC accessories and 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB / Panel to sub DB complete fixing on surface / wall all as specified and directed. 215 Supply and fix Modular AC Box with MCB (25A, SP) Protected Socket, with sheet steel enclosure including Top Pin of 25 A, with indicator complete all as specified and directed 216 S & F in Replacement Decorative Cover for MCB Box, made of durable photo frame and hard board, with weather-resistant sticker having high-quality adhesive backing.Natural design / photographs as decided by the department will be placed and sticker for bottom line shall be printed with customized bilingual content as follows, SERVING THE SAVIOURS, GE E/M RR HOSPITAL, DELHI CANTT-10, Save Electricity and Water – Every Watt Matters, Every Drop Counts, बिजली और पानी बचाएं – हर वाट की अहमियत है, हर बूंद की कीमत है, complete with mounting accessories and installation as per site conditions, final design to be approved by GE prior to printing, all as specified and directed for frame size of 12 x 12. 217 All as per item No 216 here-in-before but size 15 x 12 218 All as per item No 216 here-in-before but size 18 x 12 219 S & Fin repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed. 220 S & Fin repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed. 221 S & Fin repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 6 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed. 222 S & Fin repairs Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, TPN 4 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of RCCBs / MCBs and isolators etc and making all necessary connections complete all as directed. 223 S & Fin repairs MCB, SPN, 63 Amps capacity, 240V, B Curve type, 10kA, double pole with over load and short circuit protection complete all as specified and directed 224 S & Fin repairs MCB, TPN, 63 Amps capacity, 415 V, B Curve type, 10kA, with over load and short circuit protection complete all as specified and directed 225 S & Fin repairs MCB, SP, 40 to 63 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed 226 S & Fin repairs MCB, SP, 6 to 32 Amps capacity, 240V, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified and directed 227 S & F in repairs, fresh air fan,sturdy Engineering plastic body, AC single Phase, 230V of size 250mm sweep with, blades, and frame and louvers complete withCopper winding complete all as specified and directed 228 Supply and fix in replacement Ceiling recessed mounting LED luminaire,600 mm x 600 mm, (2 x2) 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas.The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & its driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. 229 All as per item Srl No 228 above but CCT 3000K 230 Supply and fix in replacement Surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser,IP 40.The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K,≥ 120 lumen/watt, PF ≥0.95.The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing.The LED Luminaire & its driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed 231 All as per item Srl No 230 above but CCT 3000K 232 All as per item Srl No 230 above but, 25 W and CCT 6500K 233 All as per item Srl No 230 above but, 25 W and CCT 3000K 234 All as per item Srl No 230 above but, 10 W and CCT 6500K 235 All as per item Srl No 230 above but, 10 W and CCT 3000K 236 S & F in replacement Surface mounted, Microwave Motion Sensor LED light fitting 15 watt, Round Type, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement (auto-dim on inactivity), as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement for 3 min, with PC diffuser, IP20 from dust.CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.90, surge protection of min 2.5KV.The luminaire brand name shall be embossed / engraved on the luminaire / accessory/ Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & its driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed. 237 All as per item Srl No 236 above but, CCT 4000K 238 All as per item Srl No 236 above but, 20 W, 6500 K 239 All as per item Srl No 236 above but, 20 W, 4000 K 240 S & F in replacement ceiling recessed mounting LED COB Lights, 15 W, with COB LED, flexible to suit for different applications, Aluminium housing for better thermal management.The LEDs used should have CCT 4000K, ≥ 110 lumen / watt,50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & its driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. 241 Supply and fix in replacement energy efficient wall mounted LED bulk head light fitting 10 / 12 watt, Outdoor IP 65, LED Bulkhead Light, CW 6500K , PF>0.95 and Voltage rated 220V to 240V etc complete all as specified. 242 Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 0.50 sqmm size complete all as specified and directed 243 Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 0.75 sqmm size complete all as specified and directed 244 Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 1.00 sqmm size complete all as specified and directed 245 S & F in repairs Modular White cover plate with frame, 2 module as per make on ground 246 S & F in repairsModular White cover plate with frame, 3 module as per make on ground 247 S & F in repairs Modular White cover plate with frame, 4 module as per make on ground 248 S & F in repairs Modular White cover plate with frame, 6 module as per make on ground 249 S & F in repairs Modular White cover plate with frame, 8 module as per make on ground 250 S & F in repairs Modular Metal Flush Box, 1/2 module as per make on ground 251 S & F in repairs Modular Metal Flush Box, 3 module as per make on ground 252 S & F in repairsModular Metal Flush Box, 4 module as per make on ground 253 S & F in repairs Modular Metal Flush Box, 6 module as per make on ground 254 S & F in repairsModular Metal Flush Box, 8 module as per make on ground 255 S & F in repairs Modular Switch ROMA, 6/10 A 256 S & F in repairs Modular Switch ROMA, 16 A 257 S & F in repairs Modular Socket ROMA, 6/10 A 258 S & F in repairs Modular Socket ROMA, 6/16 A 259 The contractor is required to provide a person proficient in speaking English & Hindi with a mobile with a SIM, computer, printer & internet connection to access the Complaint Mgt Portal for taking complaints through call VYNUS (Online Complaint ManagementSystem) & whatsapp. The place for establishing the complaint cell will be provided by GE. The ibid person shall note down the complaint in register & deploy resources for cleaning complaints within working hours. The report of complaint shall be noted in the register and shall be shown to AGE/JE every day before closure of office/ working hours.Rates for ibid service is deemed to be included on quoted rates of BOQ.
Contract Date: Feb 02, 2026 Contract Value : ₹ 84.14 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 9
Delhi View Result →
5.
Railways #8454369 AOC
Supply, Installation,Testing And Commissioning Of Ip Based Video Surveillance System As Per Rdso Specification No:- Rdso/Spn/Tc/106/2025, Version 3.1 For Rolling Stock Of Ecor.Supply, Installation,Testing And Commissioning Of Ip Based Video Surveillance System As Per Rdso Specification No:- Rdso/Spn/Tc/106/2025, Version 3.1 For Rolling Stock Of Ecor.,Supply, Installation,Testing And Commissioning Of Ip Based Video Surveillance Sy Stem As Per Rdso Specification No:- Rdso/Spn/Tc/106/2025, Version 3.1 For Lhb Ac Coaches Of E Cor. [ Warranty Period: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Sse-Cbr-Mcs, Ecor Odisha 180.00 Coach Set Sse/C-W/Bbs, Ecor Odisha 180.00 Coach Set , Supply, Installation,Testing And Commissioning Of Ip Based Video Surveillance System As Per Rdso Specification No.Rdso/Spn/Tc/106/2025, Version 3.1 For Lhb Non Ac Coaches Of Ecor. [ Warranty P Eriod: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Sse-Cbr-Mcs, Ecor Odisha 150.00 Coach Set Sse/C-W/Bbs, Ecor Odisha 120.00 Coach Set , Supply, Installation,Testing And Commissioning Of Ip Based Video Surveillance System As Per Rdso Specification No.Rdso/Spn/Tc/106/2025, Version 3.1 For Ls Type Lhb Coaches Of Ecor. [ Warranty Period: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Page 1 Of 9 Run Date/Time: 21/08/2025 10:10:48Stores/Ecor Tender Document , Supply, Installation,Testing And Commissioning Of Ip Based Video Surveillance System As Per Rdso Specification No.Rdso/Spn/Tc/106/2025, Version 3.1 For Icf Ac Coaches Of Ecor. [ Warranty Period : 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Sse-Cbr-Mcs, Ecor Odisha 40.00 Coach Set Sse/C-W/Bbs, Ecor Odisha 30.00 Coach Set , Supply, Installation, Testing And Commissioning Of Ip Based Video Surveillance S Ystem(Vss) For Rolling Stock Of Indian Railways, In Trailer Coaches Of Conventional Emu/Memu Coaches And 3 Phase Emu/Memu Coaches As Per As Per Rdso Specification No Rdso/Spn/Tc/106/ 2025, Version 3.1 Dated 04.06.2025. [ Warranty Period: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Sse-Cbr-Mcs, Ecor Odisha 15.00 Coach Set , Supply, Installation, Testing And Commissioning Of Ip Based Video Surveillance S Ystem(Vss) For Rolling Stock Of Indian Railways, In Motor Coaches Of Conventional Emu/Memu C Oaches And 3 Phase Emu/Memu Coaches As Per As Per Rdso Specification No Rdso/Spn/Tc/106/2 025, Version 3.1 Dated 04.06.2025. [ Warranty Period: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Sse-Cbr-Mcs, Ecor Odisha 5.00 Coach Set , Supply, Installation,Testing And Commissioning Of Ip Based Video Surveillance System As Per Rdso Specification No.Rdso/Spn/Tc/106/2025, Version 3.1 For Icf Non-Ac Gs Coaches Of Ecor. [ Warrant Y Period: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Sse-Cbr-Mcs, Ecor Odisha 60.00 Coach Set Sse/C-W/Bbs, Ecor Odisha 25.00 Coach Set , Supply, Installation,Testing And Commissioning Of Ip Based Video Surveillance System As Per Rdso Specification No.Rdso/Spn/Tc/106/2025, Version 3.1 For Icf Nac(Excluding Gs) Coaches Of Ecor. [ W Arranty Period: 36 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Sse-Cbr-Mcs, Ecor Odisha 60.00 Coach Set Sse/C-W/Bbs, Ecor Odisha 40.00 Coach Set
Contract Date: Dec 18, 2025 Contract Value : ₹ 9.64 Crore
Government Departments No of Bidders 1
Odisha View Result →
6.
Railways #8289661 AOC
Supply Of Hi-Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxyhi-Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy,Supply & Application Of Hi-Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2-3 Mm In Lavatory Area Of Lhb Coaches (Both Ac & Non Ac) & Conventional Co Aches (Both Ac & Non Ac) As Per Rdso C9704 & Astm C-579-01, Conform To Fire Properties Of En 45545-Ii. Approx Quantity Of Material Per Lavatory (1 Coach Set - 4 Lavatories Area; Of 1 Lavatory: 1.00 Sq. M Total; Area/Coach Set-4.00 Sq.M) 1. Etch Primer : 0.2 Kg. 2. Epoxy Primer : 1 Kg. 3. Epoxy Screed : 4 Kg. 4. Epoxy Top Coat : 3 Kg [ Warranty Period: 30 Months After The Date Of Delivery ] ] Senior Section Engineer Madhya Pradesh 7.00 Set
Contract Date: Nov 19, 2025 Contract Value : ₹ 1.32 Lakh
Government Departments No of Bidders 1
Madhya Pradesh View Result →
7.
Railways #8219524 AOC
Supply Of Passenger Alarm Chain Coach Indication, Led Light Fitting (Type-I), Suitable For Use In Lhb & Conventional Type Non-Ac Gs & Ls Coaches, As Per Rcf Drawing No. Lw 76098 Alt- A And Conforming To Rdso Specification No. Rdso/Pe/Spec/ Tl/0091 (Rev-1)-2016 And Rcf Annexures 1, 2 & 3Passenger Alarm Chain Coach Indication, Led Light Fitting (Type-I), Suitable For Use In Lhb & Conventional Type Non-Ac Gs & Ls Coaches, As Per Rcf Drawing No. Lw 76098 Alt- A And Conforming To Rdso Specification No. Rdso/Pe/Spec/ Tl/0091 (Rev-1)-2016 And Rcf Annexures 1, 2 & 3,Passenger Alarm Chain Coach Indication, Led Light Fitting (Type-I), Suitable For Use In Lhb & Conventional Type Non-Ac Gs & Ls Coaches, As Per Rcf Drawing No. Lw 76098 Alt -A And Conforming To Rdso Specification No. Rdso/Pe/Spec/ Tl/0091 (Rev-1)-2016 And Rcf Anne Xures 1, 2 & 3 [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Carriage Stores Depot Ajmer, Rajasthan 578.00 Numbers
Contract Date: Nov 07, 2025 Contract Value : ₹ 12.41 Lakh
Government Departments No of Bidders 1
Rajasthan View Result →
8.
Railways #7988652 AOC
Supply Of Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except Icf Built Ac Coaches) And Non Ac Lhb Coaches, Passenger Area (Cabin) For Conventional And Lhb Non Ac Coaches And Conventional Non Ac Chair Car (Day Coach). Type-B 1 (9 W), As Per Rdso Specification No. Rdso/Pe/Spec/Tl/0091-2016 (Rev.1)And Rcf Drg. No.Cc76453 Along With Rcf Annexure-1,2,3Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except Icf Built Ac Coaches) And Non Ac Lhb Coaches, Passenger Area (Cabin) For Conventional And Lhb Non Ac Coaches And Conventional Non Ac Chair Car (Day Coach). Type-B 1 (9 W), As Per Rdso Specification No. Rdso/Pe/Spec/Tl/0091-2016 (Rev.1)And Rcf Drg. No.Cc76453 Along With Rcf Annexure-1,2,3,Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except I Cf Built Ac Coaches) And Non Ac Lhb Coaches, Passenger Area (Cabin) For Conventional And Lhb Non A C Coaches And Conventional Non Ac Chair Car (Day Coach). Type-B 1 (9 W), As Per Rdso Specification No. Rdso/Pe/Spec/Tl/0091-2016 (Rev.1)And Rcf Drg. No.Cc76453 Along With Rcf Annexure-1,2,3 [ W Arranty Period: 72 Months After The Date Of Delivery ] ]
Contract Date: Sep 02, 2025 Contract Value : ₹ 5.01 Lakh
Government Departments No of Bidders 1
Jharkhand View Result →
West Bengal View Result →
10.
Railways #7023214 AOC
Supply Of Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except Icf Built Ac Coaches) And Non Ac Lhb Coaches Etc.Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except Icf Built Ac Coaches) And Non Ac Lhb Coaches Etc.,Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except I Cf Built Ac Coaches) And Non Ac Lhb Coaches, Passenger Area (Cabin) For Conventional And Lhb Non A C Coaches And Conventional Non Ac Chair Car (Day Coach). Type-B 1 (9 W), As Per Rdso Specification No. Rdso/Pe/Spec/Tl/0091-2016 (Rev.1)And Rcf Drg. No.Cc76453 Along With Rcf Annexure-1,2,3 [ W Arranty Period: 72 Months After The Date Of Delivery ] ]
Contract Date: Feb 28, 2025 Contract Value : ₹ 1.47 Lakh
Government Departments No of Bidders 1
West Bengal View Result →
11.
Railways #7023211 AOC
Supply Of Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except Icf Built Ac Coaches) And Non Ac Lhb Coaches Etc.Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except Icf Built Ac Coaches) And Non Ac Lhb Coaches Etc.,Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except I Cf Built Ac Coaches) And Non Ac Lhb Coaches, Passenger Area (Cabin) For Conventional And Lhb Non A C Coaches And Conventional Non Ac Chair Car (Day Coach). Type-B 1 (9 W), As Per Rdso Specification No. Rdso/Pe/Spec/Tl/0091-2016 (Rev.1)And Rcf Drg. No.Cc76453 Along With Rcf Annexure-1,2,3 [ W Arranty Period: 72 Months After The Date Of Delivery ] ]
Contract Date: Feb 28, 2025 Contract Value : ₹ 3.01 Lakh
Government Departments No of Bidders 1
West Bengal View Result →
12.
Railways #7023209 AOC
Supply Of Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except Icf Built Ac Coaches) And Non Ac Lhb Coaches Etc.Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except Icf Built Ac Coaches) And Non Ac Lhb Coaches Etc.,Led Light Fitting For Corridor, Doorway And Gangway For All Conventional Coaches (Except I Cf Built Ac Coaches) And Non Ac Lhb Coaches, Passenger Area (Cabin) For Conventional And Lhb Non A C Coaches And Conventional Non Ac Chair Car (Day Coach). Type-B 1 (9 W), As Per Rdso Specification No. Rdso/Pe/Spec/Tl/0091-2016 (Rev.1)And Rcf Drg. No.Cc76453 Along With Rcf Annexure-1,2,3 [ W Arranty Period: 72 Months After The Date Of Delivery ] ]
Contract Date: Feb 28, 2025 Contract Value : ₹ 3.01 Lakh
Government Departments No of Bidders 1
West Bengal View Result →
13.
Railways #6988500 AOC
Supply Of Passenger Alarm Coach Indication Light For Lhb & Conventional Type Non Ac Gs & Ls Coaches As Per Rcfs Drg. No. L.W-76098 Confirming To Rdso Spec. No. Rdso/Pe/ Spec / Tl/ 0091 (Rev.1) 2016Passenger Alarm Coach Indication Light For Lhb & Conventional Type Non Ac Gs & Ls Coaches As Per Rcfs Drg. No. L.W-76098 Confirming To Rdso Spec. No. Rdso/Pe/ Spec / Tl/ 0091 (Rev.1) 2016,Passenger Alarm Chain Coach Indication, Led Light Fitting ( Type-I) , Suitable Fo R Lhb & Conventional Type Non Ac Gs & Ls Coaches, As Per Rcf Drawing No. Lw 76098 Or Late St, Confirming To Rdso Specification No. Rdso/Pe/Spec/Tl/0091 (Rev-1) -2016. [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Carriage Stores Depot Ajmer, Rajasthan 837.00 Numbers
Contract Date: Jan 10, 2025 Contract Value : ₹ 1.93 Lakh
Government Departments No of Bidders 1
Rajasthan View Result →
14.
Railways #6797368 AOC
Supply Of Passenger Alarm Coach Indication Light For Lhb & Conventional Type Non Ac Gs & Ls Coaches As Per Rcfs Drg. No. L.W-76098 Confirming To Rdso Spec. No. Rdso/Pe/ Spec / Tl/ 0091 (Rev.1) 2016Passenger Alarm Coach Indication Light For Lhb & Conventional Type Non Ac Gs & Ls Coaches As Per Rcfs Drg. No. L.W-76098 Confirming To Rdso Spec. No. Rdso/Pe/ Spec / Tl/ 0091 (Rev.1) 2016,Passenger Alarm Chain Coach Indication, Led Light Fitting ( Type-I) , Suitable Fo R Lhb & Conventional Type Non Ac Gs & Ls Coaches, As Per Rcf Drawing No. Lw 76098 Or Late St, Confirming To Rdso Specification No. Rdso/Pe/Spec/Tl/0091 (Rev-1) -2016. [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ] Carriage Stores Depot Ajmer, Rajasthan 837.00 Numbers
Contract Date: Jan 10, 2025 Contract Value : ₹ 8.46 Lakh
Government Departments No of Bidders 1
Rajasthan View Result →
15.
Railways #2667276 AOC
Supply Of Supply And Application Of Hi Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2-3 Mm Thickness In Lavatory Area Of Lhb Coaches (Both Ac & Non Ac) & Conventional Coaches (Both Ac & Non Ac) As Per Rdso C9704 & Astm C-579-01, Conform To Fire Properties Of En 45545-Iiquantity Of Material Per Lavatory (1 Coach Set ? 4 Lavatories Area; Of 1 Lavatory: 1.00 Sq.M Total; Area/Coach Set-4.00 Sq.M)1. Etch Primer : 0.2 Kg., 2. Epoxy Primer : 1 Kg., 3 Epoxy Screed : 4 Kg., 4. Epoxy Top Coat : 3 Kg.Supply And Application Of Hi Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2-3 Mm Thickness In Lavatory Area Of Lhb Coaches (Both Ac & Non Ac) & Conventional Coaches (Both Ac & Non Ac) As Per Rdso C9704 & Astm C-579-01, Conform To Fire Properties Of En 45545-Iiquantity Of Material Per Lavatory (1 Coach Set ? 4 Lavatories Area; Of 1 Lavatory: 1.00 Sq.M Total; Area/Coach Set-4.00 Sq.M)1. Etch Primer : 0.2 Kg., 2. Epoxy Primer : 1 Kg., 3 Epoxy Screed : 4 Kg., 4. Epoxy Top Coat : 3 Kg.,Supply And Application Of Hi Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2- 3 Mm Thickness In Lavatory Area Of Lhb Coaches (Both Ac & Non Ac) & Conventional Coaches (Bot H Ac & Non Ac) As Per Rdso C9704 & Astm C-579-01, Conform To Fire Properties Of En 455 45-Iiquantity Of Material Per Lavatory (1 Coach Set ? 4 Lavatories Area; Of 1 Lavatory: 1.00 Sq.M Total; Area/Co Ach Set-4.00 Sq.M)1. Etch Primer : 0.2 Kg., 2. Epoxy Primer : 1 Kg., 3 Epoxy Screed : 4 Kg., 4. Epoxy Top Coat : 3 Kg. [ Warranty Period: 30 Months After The Date Of Delivery ]
Contract Date: Aug 22, 2024 Contract Value : ₹ 5.55 Lakh
Government Departments No of Bidders 1
West Bengal View Result →
Rajasthan View Result →
Jharkhand View Result →
18.
Railways #2559400 AOC
Supply Of Supply & Application Of Hi-Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2-3 Mm In Lavatory Area Of Lhb Coachessupply & Application Of Hi-Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2-3 Mm In Lavatory Area Of Lhb Coaches, Supply & Application Of Hi-Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2-3 Mm In Lavatory Area Of Lhb Coaches ( Both Ac & Non Ac ) & Conventional Coaches ( Both Ac & Non Ac ) As Per Rdso C9704 & Astm C-579-01, Conform To Fire Properties Of En 45545-Ii Quantity Of Material Per Lavatory ( 1 Coach Set - 4 Lavatories Area; Of 1 Lavatory: 1.00 Sq.M Total; Area / Coach Set-4.00 Sq.M ) 1. Etch Primer : 0.2 Kg. 2. Epoxy Primer : 1 Kg. 3. Epoxy Screed : 4 Kg. 4. Epoxy Top Coat : 3 Kg. Delivery Schedule Supply On Rites Inspection 1St Supply Within 2 Months From P.O. - 8 Coach Sets ( 8 X 04 = 32 Lav. ) 2Nd Supply After One Month From 1St Supply- 13 Coach Sets ( 13 X 04=52 Lav ) 3Rd Supply After 3 Months From 2Nd Supply- 13 Coach Sets ( 13 X 04=52 Lav ) 4Th Supply After 3 Months From 3Rd Supply- 13 Coach Sets ( 13 X 04=52 Lav ) 5Th Supply After 3 Months From 4Th Supply- 13 Coach Sets ( 13 X 04=52 Lav ) 6Th Supply After 3 Months From 5Th Supply- 15 Coach Sets ( 15 X 04=60 Lav ) Sse / Paint Shop / Carriage Tamil Nadu 75.00 Set
Contract Date: Dec 15, 2022 Contract Value : ₹ 24.78 Lakh
Government Departments No of Bidders 1
Tamil Nadu View Result →
19.
Railways #2511710 AOC
Supply Of Anti Skid Heavy Duty Food Grade Fire Retardant, Supply & Application Of Hi-Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2-3 Mm In Lavatory Area Of Lhb Coaches ( Both Ac & Non Ac ) & Conventional Coaches ( Both Ac & Non Ac ) As Per Rdso C9704 & Astm C-579-01, Conform To Fire Properties Of En 45545-Ii. Quantity Of Material Per Lavatory ( 1 Coach Set - 4 Lavatories Area; Of 1 Lavatory: 1.00 Sq.M Total; Area / Coach Set-4.00 Sq.M ) 1. Etch Primer : 0.2 Kg. 2. Epoxy Primer : 1 Kg. 3. Epoxy Screed : 4 Kg. 4. Epoxy Top Coat : 3 Kg [ Warranty Period: 30 Months After The Date Of Delivery ] , Supply & Application Of Hi-Build Anti Skid Heavy Duty Food Grade Fire Retardant Epoxy Flooring 2-3 Mm In Lavatory Area Of Lhb Coaches ( Both Ac & Non Ac ) & Conventional Coaches ( Both Ac & Non Ac ) As Per Rdso C9704 & Astm C-579-01, Conform To Fire Properties Of En 45545-Ii. Quantity Of Material Per Lavatory ( 1 Coach Set - 4 Lavatories Area; Of 1 Lavatory: 1.00 Sq.M Total; Area / Coach Set-4.00 Sq.M ) 1. Etch Primer : 0.2 Kg. 2. Epoxy Primer : 1 Kg. 3. Epoxy Screed : 4 Kg. 4. Epoxy Top Coat : 3 Kg [ Warranty Period: 30 Months After The Date Of Delivery ]
Contract Date: Oct 12, 2023 Contract Value : ₹ 29.63 Lakh
Government Departments No of Bidders 1
Karnataka View Result →
TenderDetail
Loading tenders