View Bid Results For Nickel Scrap Tenders

We found 40 Bid Results related to nickel scrap tenders. You can find Contractor details who won nickel scrap tenders along with contract details in Bid awards announcements section.

Filters
Stage
24
11
5
Tender Publishing Platform
40
State / UT
11
12
8
7
5
2
1
1
1
1
1
1
Contract Value
19
1
18
1
Publish Date
0
0
0
0
0
Sector
9
14
11
8
2
1
1
1
1
1
Ownership
6
13
12
9
3
2
1
Within keyword
Active filters:
Showing 1–1 of 40 tenders matching your filters
2.
Defence #11200251 Technical Bid
Tender For Provision Of Certain Sanctioned Works Under Ge South Bathinda At Bathinda Mil Stn.- 1 Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out And Getting Out In Soft / Loose Soil Complete All As Specified & Directed. 2 Removing Excavated Material Exc 1.50 Km N Exc. 5 Km And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Complete All As Specified And As Directed. 3 Excavation In Trenches Not Exceeding 1.5 Meter Wide And Not Exceeding 1.5 Meter Depth For Foundation Etc Or For Shafts , Wells, Cesspits, Manholes , Septic Tank, For Laying Of Cables , Laying Of Pipes Not Exceeding 10 Sqm On Plan And Not Exc 1.5 Meter Depth And Getting Out In Soft/Loose Soil Etc Complete All As Specified And As Directed By Engineer-In- Charge. 4 Material And Labour For Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 5 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 6 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 7 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Beams, Cantilevers, Bressummers, Lintels Over 1.5 M Span And The Like Etc Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 8 Material And Labour For Rcc M-25 (Design Mix) Using 20Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors,Roofs, Landings, Balconies,Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified And As Directed By Engineer-In-Charge.Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 9 Material And Labour For Formwork Of Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 10 Material And Labour For Formwork In Square,Reactangular Or Polygonal On Rough Finished Surface Of Concrete To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And As Directed By Engineer-In-Charge. 11 Material And Labour For Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 12 Material And Labour For Formwork To Soffits Of Suspended Slabs Such As Roof Slab, Floor Slabs, Landings And Similar Work Not Exceeding 200 Mm Thick (Horizontal Or Sloping) On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 13 Material And Labour For Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors,Window Cills, Concrete Rail Ings, Openings In Concrete Walls, Floor And Roofs Not Exceeding 20Cm Wide And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exceeding 10 Cm But Not Exceeding 20Cm Wide On Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 14 Material And Labour For Mild Steel Tmt Bars 10Mm Dia And Over Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 15 Material And Labour For Mild Steel Tmt Bars 6Mm To 8Mm Dia Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 16 Demolition Of Brick Work Or Stone / Boulder Masonry, Built In Cement Mortar Or Cement Lime Mortar Including All Quoins, Arches, Pillars, Etc, In Any Description Complete All As Specified And As Directed By Engineer-In-Charge. 17 Material And Labour For Brick Work With Sub Class ‘B’ Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 18 Material And Labour For Brick Work With Fly Ash Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 19 Material And Labour Brick Work With Sub Class ‘B’ Old Size Burnt Clay Bricks Straight Or Curved On Plan Exceeding 6 Metre Mean Radius Built In Cement Mortar 1:6, Complete All As Specified And As Directed By Engineer-In-Charge . 20 Material And Labour For Brick Work With Fly Ash Old Size Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Walls Built In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In-Charge. 21 Demolition Of Cement Concrete (Unreinforced) In Ground Floor And Paving Not Exceeding 15Cm Thickness Below Or Above Ground Level Of Any Description And In Any Position Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge 22 Material & Labour For Cement Concrete 1:3:6 Type C-2 Using 40 Mm Graded Stone Aggregate For Foundations, Fillings & Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 23 Material And Labour For Cement Concrete (1:5:10), Type E-2 Using 40 Mm Graded Stone Aggregate As In Filling Of Sunken Floors Complete All As Specified And As Directed By Engineer-In-Charge. 24 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided Complete All As Specified And Directed. 25 Material And Labour For Waterproofing Treatment To Sunken Floor Using Acrylic Based Multipurpose Polymer. The Treatment Shall Be Carried Out As Per Manufactures Specification. The Treatment Shall Be Include Of The Following Elements Also: 1. Surface Preparation Of Substrate By Removing All Traces Of Contaminates, Loose And Friable Particles, Cement Laitance Oils And Grease, Water Repellent Coatings Etc2. Injection Grouting Using Cementitious Grout If Required. The Payment For Injection Grouting Shall Be Made Separately Etc3. Repair To The Substrate, Filling Of Blow Holes/Voids And Surface Leveling Using Appropriate Products Specified By The Manufacture.4. All Intersections Of Horizontal And Vertical Surface Should Be Profiled With A Mortar Fillet Of Minimum 25Mm X 25Mm.5. The Moisture Content Of The Substrate Shall Be Checked Before Application Of First Coat At Water Proof Coating At The Rate Of 200 G/M2 Followed Brush Topping At 450G/M2 Per Mm. The Second Coat Shall Be Reinforced With Glass Fabric Between The First And Second Coat.6. The Treatment Shall Be Protected By Application Of Polymer Modified Cement Mortar Of Thickness 10Mm Applied At The Rate Of 50G Per Mm.7. Tech Specification : Tensile Adhesion Strength 0.5N/Sqmm (As Bonding Slurry). 26 Material And Labour For Aerated Autoclaved Concrete (Aac) Blocks Work According To Indian Standard Specification Is:2185(Part-3)-1984 And Latest Revision Built In Cement And Sand Mortar 1:6 With Aerated Autoclaved Concrete (Aac) Blocks Straight Or Curver On Plan Exceeding 6Mtr Mean Radius As In Sunken Floor Complete All As Specified And And As Directed By Engineer-In-Charge. 27 Supply Only Integral Water Proofing Compound. 28 Removing Excavated Material As In All Kind Of Soils Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.5M Above The Starting Point Complete All As Specified And As Directed By Engineer-In- Charge. 29 Returning Filling In Any Type Of Soil, Including Spreading, Levelling,Watering And Well Ramming In Layer Not Exceeding 25 Cm In Each Layer, Complete All As Specified And As Directed By Engineer-In- Charge. 30 Material And Labour For Sand Filling Under Floor Or In Foundation Including Spreading Levelling, Watering And Well Ramming In Layers Not Exc 25 Cmetc Complete All As Specified And As Directed By Engineer-In- Charge. Note: Sand Shall Be Approved By Ge. 31 Material And Labour For Hard Core Using Broken Stone Aggregate Of Gauge Not Exc. 63Mm, Deposited Spread And Leveled In Layers Not Exc. 150 Mm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed By Engineer-In- Charge. 32 Material And Labour For 75 Mm Thick Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Sub Base Of Floor. Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 33 Material And Labour For Rendering 10 Mm Thick In Cement Mortar 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Of Walls And Finishing The Surface Even & Fair Faces Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 34 Material And Labour For Rendering 5 Mm Thick In Cement Mortar In (1:3) On Ceiling And Finishing The Surface Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. 35 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 36 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Fair & Even Mixed With Liquid Water Proofing Compound As Per ManufacturerS Instructions But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. Note :- Liquid Water Proofing Compound Shall Be Measured And Paid Separately. 37 Supply And Fixing Chicken Wire Mesh ( Murga Jali ) In Cement Plaster Or Over Joints Of R.C.C And Brickwork Or As Per Site Requirement Of 24 Gauge & 12 Mm Mesh And 300 Mm Width For Construction Joints And Chasing In Brick Work For Electrical Conduits Or Water Supply Pipes And Pegs/Nails With Nailing Machine As Required Before Rendering / Plastering Etc. Complete As Per Site Requirement Complete All As Specified And As Directed By Engineer-In- Charge.Note: Rendering / Plastering Shall Be Measured And Paid Seperately Under Serial Item No. 5.00 Of ScheduleA Boq Here-In- Before. Nothing Shall Be Paid Extra On Account Of Rendering / Plastering In This Item. 38 Material And Labour For Applying Acrylic Wall Care Putty On Internal Surfaces And External Surfaces Of Walls/Ceilings/Soffits (Thickness Vary From 1.5 To 2.5 Mm As Required For Desired Smoothness And Leveling Of Surfaces In Two Or More Layers) By Using Ready Made Acrylic Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc Complete All As Specified And Directed By Engineer-In- Charge.Make Of Acrylic Wall Care Putty : As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After.Notes : (I) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. (Ii)The Make Of Acrylic Wall Care Putty Shall Be As Per The Recommendation Of Manufacturer Of Paint. 39 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 40 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying 01 Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Existing Shade @ 10 Sqm/Litre/1 Coat By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits ( Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc, Over Including A Coat Of Exterior Wall Primer @ 10 Sqm/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Including Removing The Vegetation Of Any Type And Description The Making The Surface Good Complete All As Specified And Directed. 41 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 42 M&L For Preparing Existing Treated Surfaces Of Ceiling Including Cornices And Applying Two Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And As Directed By Engineer-In-Charge. 43 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 44 Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Interior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Including A Coat Of Exterior Wall Primer @ 11 Sq.M/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed. 45 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 46 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying One Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Approved Shade @ 5 Sqm/Litre/2 Coats By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer @ 11 Sqm/Litre/1 Coat Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits (Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed.Note For Item No 5 To 8 :- (A) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. 47 Material And Labour For For Preparing New Plastered Surfaces Of Ceilings And Applying Three Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The Last Two Coats Of White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And Directed By Engineer-In- Charge. 48 Material And Labour For Applying Three Coats Of White Wash On Newly Plastered Or Unplastered Ceiling Surfaces Including Preparation Of Surfaces, Complete All As Specified And Directed 49 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exc 1.5 Sqm Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 50 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4 Sqm Each Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 51 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat Of Size 45Mm X 70 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 52 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat With Double Rebate Of Size 65Mm X 125 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 53 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 54 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Decorative Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 55 Supply & Fixing Factory Made 30Mm Thick Solid Wpc ( Wood Polymer Composite ) Wiremesh Door Shutter Of Required Size Comprising Of Virgin Pvc Resin Of K Value 57-60 ( Suspension Rade ), Calcium Carbonate And Natural Fibers ( Wood Powders/ Rice Husk/ Wheat Husk ) And Non Toxic Additives, Made From Extrusion Process Wpc Foam Sheet Single Extruded ( Inner ) With Having Minimum Density Not Less Than 650 Kg/Cum , Having Good Screw Holding Capacity ( Screw Withdrawal Strength Of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Of 50 N/Mm2, Modulus Of Elasticity 850N/Mm2 And Resistance Of Spread Of Flame Of Class A Category With Property Of Being Termite/ Borer Free.Water/ Moisture Proof And Fire Retardant. Pvc Foil Of Minimum 14 Microns Thick Of Approved Design Pasted On Both Faces Of Shutter For Fixing Mosquito Mesh And Xtn Aluminium Mesh Together On Panel Area Of Door Except Stiles And Rails To Be Panelled With And Including Mesh With Self Tapping Round Headed Scresws At Required Distance, Screws And Edges Covered With Feathered Pvc Edge Beading All Around Of Mesh And Fixing Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws With And Including 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01 No. Of Helical Door Spring Of 300 Mm Length Complete All As Specified And As Directed By Engineer-In-Charge. Note: 1. Material Test Certificate Of All The Items And Authentication Should Be Compulsory Provided By The Manufacturing Company 2. The Rate Of 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01No. Of Helical Door Spring Of 300 Mm Length Is Inclusive In This Item And Nothing Shall Be Paid Extra On This Item..3. The Rate Of Mosquito Mesh And Xtn Aluminium Mesh Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 56 Supply And Fixing Factory Made Upvc White Colour Casement (Openable) Window (Area Exceeding 1.00 Sqm But Not Exceeding 2.00 Sqm Each) Made Of Extruded Profiles With Wall Thickness Of 2.3Mm ( + – 0.2Mm). Window Profile With Hollow Section With Multi Chamber, Frame (60Mm X 58Mm), Sash (60Mm X 73Mm), T Profile (One Vertical Length In Between Two Shutters) (60Mm X 74Mm), Glazing Bead (35Mm X 20Mm) Will Be Mitered Cut And Fusion Welded At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc., Making Arrangement For Fixing Of Hardware. Epdm Gasket 1.2 +– 0.2Mm Thick, Galvanized Steel Frame (28Mm X 21.5Mm), Sash (31Mm X 27.5Mm). T Profile (27Mm X 17Mm) To Be Inserted In Required Profile, Frame Will Be Fixed To The Wall With 8 Mm X 100Mm Long Fasteners. Hardware: [Casement Handle Made Of Zinc Alloyed (White Powder Coated), But Hinges OfZinc Alloyed (White Powder Coated), Transmission Gear Made Of Mild Steel With Multi Point Locking System] And 5Mm Thick Glazing With Selected Quality Glass.(Note: The Unit Rate Quoted By Contractor Excludes Cost Of Glass And Includes All Other Connected Accessories. Net Opening Will Be Measured For Payment Purpose.) 57 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-1 Using 20 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 58 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-2 Using 40 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 59 Demolition And Breaking Up Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete)Of Any Dia Set In Cement Laid In Trenches Incl All Fittings & Accessorises Complete All As Specified And As Directed By Engineer-In- Charge. 60 Supply & Fixing For 4 Mm Thick, Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square Not Exceeding 0.5 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 61 Supply & Fixing 4.0 Mm Thick Figured Glass Pin Head Type And Glazing With Oil Putty In Square N.Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed 62 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Not Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 63 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 64 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles, Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accourdingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (V)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill . 65 Supply & Fixing Stainless Steel Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Stainless Steel Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 66 Supply & Fixing Galvanised Ms Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Galvanised Ms Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 67 Material And Labour For Providing And Laying Premium (1St Quality) Straight Edge,Stain Free, Glooss Finish, Square Marbonite Double Charged Vitrified Tiles Size In 600Mm X 600Mm X 9Mm To 10Mm Thick As In Floors Etc. Shade As Approved By Ge , Set And Jointed With Using Spacer And Approved High Polymer Modified, Grey Cement-Based Tile Adhesive Suitable For Fixing Medium Format Tile/Stone In Walls/Floor Conforms To Is 15477 : 2019 Type 2T “Adhesives For Use With Ceramic, Mosaic And Stone Tiles” Conforms To En 12004: 2017 And Is A Normal Cementitious Adhesives (C1) With Slip Resistance (T) Of Class C1 And Necessary Grouting As Per Manufacturer’S Instruction, Completed All As Specified And Directed By Engineer-In-Charge. 68 Supply And Fixing Anodised Aluminium Snap Grid Frame Work For False Ceiling 605Mm X 605 Mm Etc Complete All As Specified And As Directed By Engineer-In-Charge. 69 Supply And Fixing False Ceiling At All Heights With Grg (Glass Fibre With Reinforced Gypsum) False Ceiling Tiles Of Size 595 X 595 Mm Of Approved Tecture Design And Patterns Having Moisture Content Less Than 2% Humidity Resistance Of 99%, Nrc 0.50 To 0.75 As Per Is 8225:1987, Noncombustible As Per Bs 476 (Part 4)- 1970 And Light Reflectance Of 85%D (Minimum) To Be Laid In True Horizontal Level Suspended On Inter Locking Metal T-Grid Of Hot Dipped Galvanisezed Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 15 X 32 Mm Of Length 3000 Mm, Cross-T Of Size 15 X 32Mm Of Length 1200Mm And Secondary Intermediate Cross T Of Size 15 X 32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L Shape Level Adjuster Of Size 85 X 25 X 2Mm. Galvanized Iron Perimeter Wall Angle Of Size 24 X 24 X 0.40Mm Of Length 3000 Mm To Be Fixed On Periphery Wall I Partition With Help Of Plastic Rawl Plugs At 450 Tiles Fully Center To Center And 40Mm Long Dry Wall Wodd Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge. 70 Material And Labour Anodised Aluminium Frame For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Omplete All As Specified And As Directed By Engineer-In-Charge. 71 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accordingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Powder Coated Butt Hinges, Aluminium Handles, Aluminium Tower Bolts & Aluminium Peg Stays Shall Be Measured And Paid Seperately Under Respective Itmes Of ScheduleA Boq.(V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (Vi)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill 72 Material And Labour Anodised Aluminium Grill (Anodised Transparent Of Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac 15) Of Approved Design/Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass/Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And Direction Of Engineer-In-Charge. 73 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 15Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 74 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 20Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 75 Supply And Fixing 16 Mm Bore Cpvc Pipe Sdr 11 With And Including Cpvc Sdr 11 Fittings And Fixed To Walls & Ceilings Or Laid In Floors, Complete Complete All As Specified And As Directed By Engineer-In-Charge 76 Supply And Fixing 20 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 77 Supply And Fixing 25 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 78 Material And Labour For Cutting Chases In Brick Wall , Pinning In. Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 Or Pcc 1:2:4 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Exc 10 Cm But Not Exc 20 Cm Girth Complete All As Specified And As Directed By Engineer-In- Charge.. 79 Supply And Fixing In Repair Brass Chromium Plated Wall Mixer For Mixing Hot & Cold Water Screwed Down, Screwed For 15Mm Bore Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 80 Supply And Fixing In Repair Bib Taps Cost Copper Alloy With Crutch Or Butterfly Handle , Screwed Down , Chromium Plated Screwed For Iron Pipe Or Brass Ferrul For 15Mm Bore Dia Pipe Complete All As Specified And Director. 81 Supply And Fixing In Reapir 15Mm Bore Bib Tap, Long Body, Fancy Type, Chromium Plated, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 82 Supply And Fixing In Repair 15Mm Bore Stop Valves, Fancy Type, Chromium Plated With Long Shank And Cup (Concealed Type) Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed For Iron Pipe Or For Brass Ferrule Complete All As Specified & Directed By Engineer-In-Charge. 83 Supply And Fixing In Repair Angular Stop Cock With Wall Flange, Fency Type Chromium Plated Cast Copper Alloy Screwed Down, High Pressure, Screwed One Ends For 15Mm Bore Of Iron Pipe Or For Union And Fixed In Position Complete All As Specified & Directed By Engineer-In-Charge. 84 Supply And Fixing In Repair Vitreous China Wash Hand Basin, White, Flat Back, Size 450Mm X 300 Mm Including Cast Iron Cantilever Bracket With And Including 32 Mm Dia Brass Waste Coupling And With And Including Fixing Of Waste Fitting And Union Complete All As Specified And As Directed By Engineer-In-Charge. 85 Supply And Fixing In Repair Ptmt Mirror Cabinet Of Size 380Mm X 450Mm Best Quality Confirming Ot Sample Kept In GeS Office Complete All As Specified And Directed By Engineer-In-Charge. 86 Supply And Fixing In Replacement Sink With Drainage Board Made Of Stainless Steel 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X460Mm Bowl Size 410Mm X330Mm X160Mm Complete All As Specified And As Directed By Engineer-In-Charge. 87 Supply & Fixing In Replacement Brass Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe And Fixed For Iron Pipe 15Mm Bore Complete All As Specified And As Directed By Engineer-In-Charge. 88 Supply And Fixing In Repair Stainless Steel Plate Rack Of Size 900Mm X 600Mm X 250Mm And Thickness Of Stainless Steel Strip Of 1Mm Fixed On Wall Etc. Complete All As Specified And Directed . 89 Material And Labour For Cutting Holes In Brick Walls Built In Cement Mortar (Not Exceeding Half Brick) For Inserting Hold Fast And Making Good Dismantled Portion In Cm 1:3 Or Cement Concrete 1 : 2 : 4 , Type B1 As Required , Depth Of Embedded Portion Exceeding Half Brick Walls And Not Exceeding One Brick Of Hold Fast Or Lugs Measured From The Face Of The Jamb Into Walls Complete All As Specified And As Directed By Engineer-In- Charge. 90 Material And Labour For In Repair Vitreous China Wash Down Water Closet Pan Wall Hanging Single Piece (With And Including Flushing Cistern Ewc) P Trap, With And Including White Coloured Closed Pattern Plastic Seat Cover, Hand Faucet , With And Including Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And As Directed By Engineer-In- Charge. 91 S & F In Repairs Cp Stainless Steel Grating (With Or Without Waste Hole), 125Mm Size, Fixed On Floor/Nahani Gully Trap Traps Etc Complete All As Specified And Directed. 92 S&F In Repair 25Mm Dia And 1Mm Thick Stainless Steel Drapery Rod Including With Bracket / Wall And Other Side Fancy Knobs At Both Ends As Approved By Engineer-In-Charge/Ge Including Taking Down Old Existing Rod/Pelmet With Accessories Complete All As Specified. 93 Supply And Fixing Cp Brass Fancy Type Corner Glass Shelf (25Cm/30Cm ) With Cp Brass Bracket & Railing Etc. Complete All As Specified And As Directed By Engineer-In- Charge. 94 Supply And Fixing In Repair Stainless Steel, Chromium Plated, Decorative Type, Soap Dish Holder Of Approximate Size 160Mm X 160Mm X 90 Mm Fixed To Wall With Rubber Plugs Complete All As Specified And As Directed By Engineer-In-Charge. 95 Supply & Fixing In Replacement Brass Chromium Plated Tubular Towel Rail 20Mm Dia D Type, 600Mm Long Between Flanges Fixed To Plug , Bracket With Chromium Plated Brass Screws Complete All As Specified And Directed By Engineer-In-Charge. 96 Supply And Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Pipes Single Socket 6 Kg/Sq Cm In Any Length With Stack Clamps Made Out Of 50Mm By 5 Mm Flat Iron And 16Mm Dia Round Iron Stays, Including Bolts And Nuts And Securing Ends Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge. Including Taking Down Old Ac Eaves Gutters And Rainwater Pipes ( Of Any Size And Pattern), Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 97 Supply & Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Ring Fit Pipes Single Socket In Any Length With Stack Clamps As Shown In Btd Drg No. 916 Sheet 1/4 To 4/4 And Btd-917 Sheet Sheet 1/1 Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge Including Taking Down Old Ac Eaves Gutters And Rain Water Pipes ( Of Any Size And Pattern) Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 98 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 100 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 99 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 75 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 100 Supply And Fixing 110 Mm Bore, Pvc (Swr) Fittings Type -B Such As Bends, Tee, Shoe Etc; Fixed To Pvc Pipes, Compete All As Specified And As Directed By Engineer - In-Charge. 101 Supply & Fixing 110Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Complete All As Specified And As Directed By Engineer-In- Charge. 102 S&F 110 Mm Bore Of Pvc (Swr) Bends And Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 103 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Single Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 104 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Double Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 105 S&F 75 Mm Bore Of Pvc (Swr) Bends & Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 106 S&F In Repairs Pvc (Swr) Gully Trap Of Size 150 X 150 Mm, Square Or Round Mouthed, Type P Setting And Jointing With Solvent Cement Complete All As Specified And Directed. 107 Supply And Fixing In Repair Pvc (Swr) Type -B Floor Trap Any Type (Q, S, P), 110/75Mm Dia With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregate Complete All As Specified And Directed By Engineer-In- Charge. 108 Supply And Fixing In Replacement 10 Litres Capacity Pvc Valveless Syphonic Action Type Low Level Flushing Cistern White With Inlet, Ball Valve, Float, Handle Including Brackets And 32Mm Dia Pvc Flush Pipe Complete All As Specified And Directed By Engineer-In-Charge. 109 S&F In Repair Vitreous China Wash Basin, White, Oval Type , Size 450 Mm X 300 Mm Fixed On And Including Cast Iron Cantilever Bracket, 32 Mm Dia Brass Waste Coupling And Including Fixing Of Tap, Waste Fitting And Union Complete All As Specified And Directed. 110 Supply & Fixing In Repair Chromium Plated Square Shower Rose 200Mm X 200Mm Size, With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union For 15Mm Bore Of Pipe Complete All As Specified And As Directed By Engineer-In-Charge. 111 Supply & Fixing In Repair Pvc Connections 15Mm Size With Brass Nuts Of Length 450Mm Complete All As Specified And As Directed By Engineer-In-Charge. 112 Supply & Fixing In Repair Pvc Waste Pipe With Socket Suitable For Connection To Waste Fittings Of 32/40Mm Dia, And Of Length Minimum 75 Cm Complete All As Specified And As Directed By Engineer-In-Charge. 113 Supply And Fixing In Replacement Three Layers 500 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 114 Supply And Fixing In Replacement Three Layers 1000 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 115 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of Size 20 Mm Bore (Minimum Weight 20Mm-210 Gram) Complete All As Specified And As Directed By Engineer-In- Charge. 116 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 20Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 117 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 25Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 118 Supply And Fixing In Replacement Bevelled Edge Mirror Selected Quality 5Mm Thick Glass Mounted And Fixed To With Chromium Plated Brass Screws And Cup Washers, With And Including Pvc Frame Around Made Of Pvc Channel, Complete All As Specified And Directed By Engineer-In-Charge. 119 Supply And Fixing In Repairs Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And As Directed By Engineer-In- Charge. 120 Roughening Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 121 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Permises Etc. Complete All As Specified And Directed By Engineer-In-Charge. 122 M&L For Pcc (1:2:4) Type B-1, Using 20 Mm Graded Stone Aggregate As In Floor Surface Finished Fair 30 Mm Thick Below Tiles Complete All As Specified And Directed. . 123 M & L Non-Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over & Including 15Mm Thick Screed In Cm 1:6 Complete All As Specified And Directed. 124 Material And Labour 25Mm Thick Cement Concrete Type B-1, 1:2:4 (12.5 Mm Graded Stone Aggregate) As Floors, Sub-Floors Etc And Finishing Surfaces Of Concrete Topping As Even & Fair Or Even & Rough To Receive The Topping Layer Complete All As Specified And Directed By Engineer-In-Charge. 125 Material And Labour For Double Charge Vitrified Ceramic Tiles ,Stain Free, Having Size Not Less Than 600X300Mm And 8 Mm Thick, Premium (1St Quality) Straight Edge, Colour As Approved By Ge , As In Vertical Surfaces Such As Skirting , Set And Jointed In Neat Cement Slurry And Laid Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In- Charge. 126 Material And Labour Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Pillars,Win Dow-Cills, Cooking Platforms And Like In Laid Over And Including 15 Mm Thick Screed In Cement Mortar (1:4) And Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Marble Shade And Roundening To The Edge Of Stone Slabs On Edges Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 127 Dismantling Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc Laid Dry Or Bedded And Pointed In Any Mortar Complete All As Specified And As Directed By Engineer-In-Charge. 128 Demolition Of Cement Concrete Reinforced Of Any Discription And In Any Position, Including Reinforcement Cut As Required To Facilitate And Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge. Note:The Weight Of Scrap Iron For Schedule Of Credit Shall Be Ascertain By Boo As Ordered By Ge.The Copy Of Boo Duly Countersinged By Ge Shall Be Enclosed With Final Bill. 129 Material And Labour For Reinforced Cement Concrete, Nominal Mix,1:2:4, Type-B1, Using 20 Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Including Proper Compaction By Using Mechanical Viberator Complete All As Specified And Directed. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 130 Supply And Fixing Pvc (Hdpe) Swr, 110 Mm Bore, Single Socketed In Any Length With Rubber Ring Joints Using Solvent As Per Manufacture Instruction, Fixed To Walls Complete All As Specified Including Fixing Of Pipe To Wall With Flat Irons Clamps Of Size 25 X 3 Mm, Bolts, Washers, Nuts, Nails Etc, After Taking Down Existing Damaged Rain Water Pipe Complete All As Specified And Directed 131 Material & Labour For In Repair 75 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 132 Material & Labour For 100 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 133 Material And Labour For Water Proofing Tratment To Roof / Terrace (Material Of Water Proof Treatment As Approved By Ge) Single Component, Acrylic Based, Flexible, Micro Fibre Reinforced Waterproofing And Heat Reflective Coating System. The Treatment Shall Be Carried Out As Per The Manufacturers Instructions And Shall Include The Followings:(A) Preparation Of Substrate And Cleaning It Off All Loose And Triable By Mechanical Means(B) Open The Cracks Lines To Form , V Grooves With Cutter/Hammer/Chisel Up To 5-10Mm And Filling With Crack Filler And Pu Sealant.(C) Application Of Primer Coat @ 0.2 To 0.3 Kg/ Sqm Followed By The First Coat @ 0.75Kg/ Sqm.(D) The Second Coat Shall Be Applied @ 0.75 Kg / Sqm And Reinforced With Fabric Re-Inforcement Between The First And Second Coat.(E) The Top Coat Of Primer Shall Be Applied After The Second Coat Dries Off @ 0.05-0.08 Kg Per Sqm.(F) The Material Shall Adhere To Following Specification. Technical Specification Of Materialtensile Strength 1.5 Mpa Astm D412Elongation At Break > 200% Astm D412Adhesion In Peel > 1.5 Mpa (On Concrete Substrate) En 1542Crack Bridging Ability Passes Upto 3.2Mm Width Astm C1305Permeability To Water Vapour Passes Is 2645Water Vapour Transimission ~ 23 G/M²/24Hr Astm E96Water Absorption 134 Material And Labour For 40Mm Average Thick Pcc Padding In 1:2:4 Type B-1 (Using 20Mm Graded Stone Aggregates) As In Roof Slab Finishing The Surface Even And Fair Using Liquid Water Proofing Compound Complete All As Specified And Directed. Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 135 Material And Labour For Making Benching With Pcc 1:2:4 Type- B0, Using 12.5Mm Graded Stone Aggregates Using With Liquid Water Proof Compound As Per ManufacturerS Instruction Along Side Wall Adjoining To Roof In Concave Shape Complete All As Specified And Directed. Note : Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 136 Material And Labour For Cement Concrete 1:2:4 , Type B-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 137 Material And Labour For Water Proofing Compound Complete All As Specified And Directed. 138 Supply And Laying Dwcpe (Sn 8) Drain Pipes 150 Mm Nominal Dia As Per Is-16098 (Part-Ii), Laid In Trenches On Bed Including All Accessories/ Fittings/ Jointed Ring, Jointing And Testing Complete All As Specified And As Directed By Engineer-In- Charge.Note:- Excavation , Earth Work, Bedding And Pedestal / Anchorage If Required Shall Be Measured And Paid Separately Under Appropriate Item Of Boq/ Sch A 139 Material And Labour For Pcc (1:3:6) Type C-2 Using 40 Mm Graded Stone Aggregates As In Concrete Bed Of Sgsw Drain Pipes Of 150 Mm Bore, Laid To Required Slope Including Packing Under And Haunching Against The Sides Of Pipes After They Are Laid And Tested Complete All As Specified And As Directed By Engineer-In-Charge. Note :- (I) Thickness Of Concrete Bed Below The Barrel Of Pipe Shall Be 10 Cm. (Ii) Width Of Concrete Bed Shall Be Outer Diameter Of Drain Pipes (Not Of Sockets / Collar) Plus 30Cm. 140 Material & Labour For Antitermite Treatment Along The External Wall Below Concrete Or Masonry Apron Using Chemical Emulsion @ 2.25 Litres Per Linear Metre Including Drilling And Plugging Holes Etc. In Apron/Plinth Etc., Complete All As Specified And As Directed By The Engineer-In-Charge. 141 Material And Labour For Att At Points Of Contact Of Wood Work By Chemical Emulsion (In Oil Or Kerosene Based Solution) @ 0.5 Litre/Hole By Drilling 6Mm Dia Holes At A Downward Angle Of 45 Degree At 150Mm Centre To Centre And Sealing The Same Complete All Sepecified And Directed By Engineer-In-Charge. 142 Material And Labour For Att Of Soil Under Existing Floors Using Emulsion @ One Liter Per Hole, 300Mm Apart Including Drilling And Plugging 12Mm Dia Holes With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To Match The Existing Floors Complete All Sepecified And Directed By Engineer-In-Charge. 143 Material And Labour For Writing Letters Or Figures (Block,Roman, Italic Ot Indian) Of Any Description, Not Exceeding 30Cm High With Paint Complete All Sepecified And Directed By Engineer-In-Charge. 144 Material And Labour For Cutting Into Existing Manholes For Connecting New Drains, Making Good To Pipe And Rendering, Cutting Out Existing Benching For And Forming Branch Channel (1/2 Round Or 3/4 Section) In Cement Concrete 1:2:4 Type B-L Smooth Finished, And Reforming Benching As Required For Internal Dia Of Pipe In 150 Mm Complete All As Specified And As Directed By Engineer-In-Charge. 145 Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 146 Material And Labour For 15Mm Thick Rendering In Cm (1:6) (Internal Surface) On Other Than Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Even & Smooth But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 147 Material And Labour For Factory Made,Machine Pressed Precast Interlocking Paver Block 60 Mm Thick With Grey Cement And No Pigment, Any Shape And Size, Conforming To Is 15658-2006, Made Out Of M-35 Grade Concrete Laid Over Sand Cushioning Complete All As Specified And As Directed By Engineer-In- Charge. Note: The R Sand Cushioning Shall Be Measured And Paid Seperately Under Appropriate Item Of Schedule A Boq. 148 Dismantling Of Brick Tiles Or Terracing Tiles Single Layer On Roof & Disposal Of Retrieved Material Upto A Distance N.Exc 100M Where Directed, Complete All As Specified And Directed By Engineer-In- Charge. 149 Demolition Of Mud In Roofs, Any Thickness, Including Plastering And Leeping (Whether Full Thickness Removed Or Only A Part Thereof Disposal Off Rubbish Upto A Distance Not Exceedomg 500.00Mtr Where Directed ) Complete All As Specified And Directed By Engineer-In- Charge. 150 Material And Labour For 15Mm Thick Screed Bed Or Bedding Layear In Cement Mortar 1:4 On Roof Surfaces, Parapet Or Vertical Beam Surface (Horizontal Or Vertical) Finishing The Surfaces Even And Fair Complete All As Specified And Directed By Engineer-In-Charge. 151 Supply And Fixing Anodised Aluminium Handle, Fabricated Type 150Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 152 Supply And Fixing Aluminium Anodised Barrel Tower Bolt Of Extruded Section, 200Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 153 Supply & Fixing Aluminium Anodised Sliding Door Bolts 300Mm Long, With Hasp And Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Specified & Directed By Engineer-In- Charge. 154 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer Without Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 155 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer With Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 156 Supply Only 3.00 Mm Thick Sheet Glass Ordinary Quality ,Fixing With Oil Putty To Wooden Or Steel Surface N.Exc 0.5 Sqm Each Complete All As Specified And Directed 157 Material & Labour For Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, In Soft / Loose Soil Complete All As Specified And Directed By Engineer-In- Charge. Complete All As Specified And Directed By Engr-In-Charge. 158 Supply And Fixing For Mild Steel Screw Bolts 5Mm To 10Mm Dia Of Neck (Machine Made) With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut, Length Of Bolt Exc 5Cm But N Exc 10Cm Long Complete All As Specified And Directed By Engr-In-Charge. 159 Supply And Fixing For Pre -Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thickness Of Any Colour Having Atensile Strength Of 550 Mpa As In Roof Covering Fixed With L Type Or J Type Or Cranked Hook Bolts All As Specified And Directed By Engineer-In-Charge. 160 Material And Labour For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Complete All As Specified And Directed By Engr-In-Charge. 161 Material And Labour For Steel Work In Tubular Post 100Mm Dia Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161- 1979 Grade St.-240 Including Rolled Mild Steel Joist, Channel, Angle, Or Tee Sections, Fixed Independently, Without Connecting Plates, Etc. (Cut To Ordinary Lengths I.E. Within 20Mm Of The Length Indicated Of Gde Fe 410 -S, Complete All As Specified And Directed By Engr-In-Charge. 162 Supply And Fixing In Repairs Magic Eye For Flush/Panelled Door Shutter Etc Complete All As Specified And As Directed By Engineer-In-Charge. 163 Supply And Fixing Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) Andhanging; Also Fastening And Fixing Complete Complete All As Specified And Directed By Engineer-In -Charge. 164 Material And Labour For Preparation Of New Steel Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over With And Including One Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified And As Directed By Engineer-In-Charge. 165 Material And Labour For Preparing Old Steel Surfaces Of Any Description Over 10 Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And As Directed By Engineer-In- Charge. 166 Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And As Directed By Engineer-In- Charge. 167 Supply & Fixing 18Mm Thick Hdhmr Board Uv Coating, Exterior Grade As Approved By Ge, With And Including Acrylic High Gloss Sheet Of Min 1Mm Thick Over Hdhmr Board, Anti Fungal, Moisture Resistance, Anti Borer, As Per Is 14587 For Frame And Shutter For Kitchen Cabinets / Cupboards (Such As Side Wall, Shutter, Partition Back Side Of Etc. Of Cupboard And Cabinets). Complete All As Specified And Directed By Engg-In-Charge. 168 Supply & Fixing In Repairs Of Stainless Steel Cabinet / Drawers Handle Having A Length Of 250Mm And Shape Complete All As Specified And Directed. 169 Supply & Fixing In Repairs Of Partial Overlay / Fully Overlay Hydraulic Self Closing Concealed Hinges Having Size 103Mm X 64Mm Finish Of Nickel/Silver As Approved By Ge Complete All As Specified And Directed By Engg-In-Charge. 170 M&L For 40Mm Gi Pipe Medium Grade Made To Shape As In Spout Pipe As In Sunken /Verandah/ Balconey Complete All As Specified And As Directed. 171 Supply And Laying Or Fixing Or Laid In Trenches/ Ducts/ Through Pipes/ In Floors / Under Roads/ Hard Standing /Along Poles And Testing Lt Cable Xlpe, Pvc Insulated Screened, Bedded, Galvanised Steel Strip Or Wire Armourd Cable (Heavy Duty) 1100 Volt Grade With Aluminium Conductor Having Cross Sectional Area 70 Sqmm X 3.50 Core Conforming To Is-7098 (Part-I -1988) Complete All As Specified And As Directed By Engineer-In-Charge. (Excavation And Earth Work, Sand Cushioning & Gi Pipe Shall Be Measured And Paid For Separately) 172 Taking Down Carefully Copper /Aluminium Point Wiring (Light, Fan, Socket Or Power Point ) Complete Including Fitting Such As Hylem , Sheet Switches, Ceiling Rose, Pendent Holder , Sockets, Fan Regulator , Bell Push, Electronic Bell , Sunken Box Except Concealed Conduit Etc. Complete All As Specified And Directed By Engineer-In-Charge. Notes:(I) The Weight Of Aluminium Scrap , Copper Scrap And Iron Scrap Shall Be Ascertained By Boo As Ordered By Ge And Same Duly Countersinged By Ge Shall Be Enclosed With Final Bill. (Ii) The Rate Of Cutting Chases (As Required) And Making Good Surfaces To Match With Adjoining Surface Shall Be Measured And Paid Seperately Under Serial Item No. 173.00, 174.00, 175.00, 176.00, 177.00, 178.00, 179.00, 180.00, 181.00, 182.00, 183.00, & 184.00 Of Boq. 173 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps One Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 174 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps Two Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 175 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Same Board Complete All As Specified And As Directed By Engineer-In- Charge. 176 All As Per Item No 17400 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 177 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 5/15 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 178 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Bell/Buzzer Point Controlled By One Push Button On Independent Board But Not Below The Switch Board, Complete All As Specified And Directed By Engineer-In-Charge. 179 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Socket Outlet 3 Pin 6 Amp On Independent Board Complete All As Specified And Directed By Engineer-In-Charge. 180 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For 15/16 Amp Socket Out Let By Using 2.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 181 Material And Labour For Point Wiring For One Light / Fan Point Controlled By One Switch With 1.5 Sqmm (Nominal Area) Pvc Insulated Unshealthed Multi Stranded Copper Conductor Cable Fr-Lsh In Existing Conduit And Provision Sunken Boxes But Inclyding 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point Controlled By One Switch And Fan Regulator Including Pvc Insulated Unshealthed 1.5 Sqmm Copper Conductor Cable Fr-Lsh Connected To Common Earth Dolly Complete All As Specified And Directed 182 All As Per Srl Item No 181.00 (Here-In-Before) But Socket 3 Pin 5 Amp 230 Volt Flush Type On Same Board 183 All As Per Srl Item No 181.00 (Here-In-Before) But For One Socket Point Outlet 3 Pin 5 Amp In Incdependent Board 184 All As Per Serial Item No 181.00 Of Boq Here-In-Before But For 15 Amp Socket Out Let By Using 1.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 185 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 5 Amp Complete All As Specified 186 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 15 Amp Complete All As Specified 187 Supply And Fixing Socket Outlet 3 Pin, 5 Amp Flush Type All As Specified 188 Supply And Fixing 2 In 1, 3 Pin, 5 And 15 Amp Flush Type Complete All As Specified 189 Supply And Fixing Modular Switch One Way , 6Amp/10Amp ,1 Module, Single Pole, 250 Volts ,Ac Supply, Isi Marked , Complete All As Specified And Directed By Engineer-In-Charge 190 Supply And Fixing Modular Socket Outlet , 6 Amp-2/3 Pin Combined 2 Module , 230 Volts , Multipurpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 191 Supply And Fixing Modular Switch One Way 16 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 192 Supply And Fixing Modular Switch Two Way 6 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 193 Supply And Fixing Modular Bell Push Switch 6A 1 Module , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge.Note: (I) Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 194 Supply And Fixing Modular Socket Outlet 6Amp/16Amp-2/3 Pin Combined,2 Module ,230 Volts ,Multi Purpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 195 Supply And Fixing Fan Regulator, Modular Type, 5 Step, High Speed, Two Module Complete All As Specified And Directed By Engineer-In-Charge. 196 Supply And Fixing Ceiling Rose 3 Terminal Flush Type 6 Amp 250V ,Isi Marked ,Ac Supply, Topline Series With Polycarbonate 20Mm X 50 Mm Two To Three Terminal, Complete All As Specified And Directed By Engineer-In-Charge. 197 Supply And Fixing Electric / Electronic Bell, Ding Dong Type 230 Volt Ac Supply,Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 198 Supply And Fixing Wall Mounted Extruded Aluminium/Polycarbonate Led Batten Fixture T8(G13 Holder) 1.2 M Including One Led Retrofit Tube 20(±10) Watt. 1.2 M T8 6500 Efficacy Not Less Than 90 Lumen/Watt Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete Including Making Connection Complete All As Specified And Directed 199 Supply And Fixing Lamp Holder ,Isi Marked Of Pvc/Polycarbonate Type With Back Plate Suitable For Batten Fitting With And Including 9Watt Led Retrofit Lamp (Base B-22) Complete All As Specified And Directed By Engineer-In-Charge. 200 Supply And Fixing Lamp Holder Pvc/ Polycarbonate Type With Back Plate Suitable For Batten Fitting With Led Bulb 5 Watt Lamp Base- B-22 Complete All As Specified And As Directed By Engineer-In- Charge.Note: Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 201 Supply Only Led Bulb 9 W (Suitable For B22 Base), 250V Ac, Green/Red/ Clear Day Light ( Cdl) In Colour Complete All As Specified And Directed By Engineer-In-Charge.As Per Direction Of Engineer-In-Charge Colour Of Led Luminiure Cdl/Warm White Shall Be Provided By The Contractor As Per Site Requirment And Nothing Shall Be Paid Extra On This Account.Notes:(A) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Led Bulb Complete Including Lamp/ Strip From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led Bulb . (B) All Led Bulbs Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (C) Scope Of Work Shall Include To Fix Led Bulb Walls/Ceiling Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account.(D) Old Unservicable Retrieved Material Shall Be Deposited In The Store Yard Of Age E/M Ge (North) Bathinda By The Contractor His Own Arrangements And Nothing Shall Be Paid Extra On This Account. (E) The Rate Of Electric Connection Connecting With Using Flexible Copper Wire Twin Core Upto Ceiling Rose/Connector Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 202 Supply And Fixing In Replacement Led Panel Light Fitting Recessed Mounted,Square Shaped Of Size 600Mm X 600Mm , 36 (±10%) Watt, Efficacy Not Less Than 100 Lumen/Watt , Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete As Per ManufacturerS Instructions With And Including Connection With Flexible Twin Core Copper Cable Of Size 23/.00076 From Ceiling Rose To Fitting Complete All As Specified And As Directed By Engineer-In- Charge. 203 Material And Labour In Replacement Sub Main Wiring Complete With Two Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh With And Including Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh For Earth Wire In Existing Pvc Concealed Conduit (Colour Code Phase-Red, Neutral-Black And Earth As Green) Complete All As Specified And Directed By Engineer-In-Charge. Notes:-(A) Three Single Core 6 Sqmm Frlsh Pvc Insulated Unsheathed With Multistranded Copper Conductor Cable 1100 Volts Grade Shall Be Measured As One Length. 204 Supply And Fixing In Replacement Mcb 40Amp -63 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 205 Supply And Fixing In Replacement Mcb 6Amp -32 Amp Sp ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 206 Supply And Fixing In Replacement Mcb 32 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 207 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 8 Way 240 Volt, Ip -54, 200 Amps Rated Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 208 Supply And Fixing Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 12 Way 240 Volt, 200 Amps Rated Copper Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 209 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Ip-54 Protection, Flush Mounted For Metal Door, Powder Coated Db Tpn 4 Way, 415 V Ac With 63 Amps Rated Bus Bar, Double Door, Dust And Vermin Proof Suitable For Incorporation Of Incoming Mccb And Outgoing Mcb Sp/Tp And Earth & Neutral Bus Bar Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 210 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 20 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 211 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 25 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 212 Supply And Fixing Led Batten Fitting 1X10 Watt, 6500K, 2 Ft Complete With Decorative Ultra Slim Square Profile Led Lighting Fixture With Extruded Polycarbonate Environment Friendly, Energy Efficient Complete With All Light Connection All As Specified And Directed 213 Supply And Fixing In Repair Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminium Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Complete With Ip 65/66 Protection Including Fixing With Gi/Ms Bracket Made Out Of Suitable Size Of Light Grade Tube Upto 1.2 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Iron With Suitable Bolt And Nuts Complete With Making Connection Complete All As Specified And Directed 214 Supply & Fixing Building Security Led Light Of 35 Watt , Ip 66 , Luminaire With High Power With Toughened Glass Complete As Per ManufacturerS Instructions With And Including Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt ,Nuts And Washers Complete And Fixing To Wall / Column With And Including Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size And Testing Complete All As Specified And Directed By Engineer-In-Charge. Notes:(A) The Rate Of Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt And Nuts And Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (B) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Security Led Light Fittings Complete Including Lamps From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led /Luminaries. (C) All Security Led Light Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (D) Scope Of Work Shall Include To Fix Security Led Light Fittings Walls/Building Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account. 215 Supply And Fixing Jointing Of Double Walled Corrugated Pipe (Dwc) As Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 216 Supply And Fixing Jointing Of Snap Fit Coupler For Double Walled Corrugated Pipe (Dwc) Of Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 217 Supply And Fixing Mccb With Adjustable Type, 4 Pole, 63 Amps, 415 Volts, 50 Hz, 25 Ka And Including Sheet Metal Enclosure Out Door Type Made Out Of 3.15 Mm Thick Crca Sheet Mounted On Angle Iron Padesta Including Grouting Complete All As Specified And Directed By Engineer-In-Charge. 218 Material And Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode 600Mm X 600Mm X 6 Mm Thick Burried Directly In Ground To Depth Of Pit Not Less Than 2.25 M Below Normal Ground Level With Top Edge Of The Plate Not Less Than 1.5 M Below Normal Ground Level Surrounded From All Sides By 15 Cm Thick Packed Layer Of Charcoal / Coal Dust And Common Salt Filling In Alternate Layers And Connected To Galvanised Earth Lead Wire 4 Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Gi Or Steel Including Gi Protection Pipe 15Mm Dia Light Grade Upto The Extent Of 7.5 Metre And Connecting To Earthing Test Point, Main Switch Board Including Gi Pipe 20 Mm Dia Light Grade For Watering, Ms Funnel And Bringing Out The Watering Pipe Upto 30 Cm Above The Normal Ground Level Plugged At Top Including All Fitting Including Pcc Earth Pit With Pcc 1:2:4 Type B-1 Using 20Mm Graded Stone Aggregate And Rcc Pit Cover Including Necessary Earthwork And Excavation In Any Type Of Soil Complete All As Specified As Shown In Electrical Plate No 3 Of Ssr Part-I And Testing On Completion. Note:- (I) Earth Continuity Of Gi Wire 4 Mm Including Protection Pipe Up To 7.5 Mtrs From Earth Electrode Will Be Included In Unit Rate, Complete All As Specified And Directed. (Ii) The Rate Of Earth Work In Soft/Loose Soil I.E. Excavation, Returing Filling And Removal, Form Work Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) Pcc Chamber Shall Be Constructed At Least 1.5 Metre Away From The Earth Electrode And Pipe For Watering Shall Be Provided In Slanting Manner. (Iv) The Earth Testing Arrangement Should Be Done By The Contractor As Per Direction Of Engineer-In-Charge. 219 Supply And Fixing 1100 Volts Grade Heavy Duty Cable Pvc Insulated Aluminium Strandred Conductor 6Sqmm, Served With Inner Sheathing Of Pvc Tape And Overall Pvc Sheathed In Service Connections Suspended By Insulating Hangers Not More Than 1 Mtr Apart Including 4Mm Suspenstion Wire, One Twin Core Cable Flat All As Specified And Directed 220 Supply And Fixing In Replacement Exhaust Fan 300Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 221 Supply And Fixing Exhaust Fan 250Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 222 Taking Down Unserviceable Complete Ceiling Fan Along With Blades And Deposited To Age E/M Store Yard Of Ge (South Bathinda) Complete All As Specified And Directed By Engr-In- Charge. 223 Supply & Fixing Ceiling Fan Of 1200Mm Sweep Complete With Blades, Down Rods, With And Including Remote Control, Single Phase, 50 Hz, Min Air Delivery 210 Cfm With Service Value 6.00 Bee. Five Star Rated With Brushless Direct Current (Bldc) Motor Connecting Up Complete With And Including Three Core Flexible Pvc Insulated Multi Stranded Copper Conductor Cable Of Suitable Size From Ceiling Rose / Connector, Including Extra Gi / Ms Pipe Down Rod, As Per Site Requirement , With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 224 Dismantling And Taking Down Of Existing Energy Meter And Refixing The Same Complete All As Specified And Directed By Engineer-In- Charge, 225 Dismantling And Taking Down Existing Geyser And Deposit In The Safe Custody / Store Yard Of Age E/M Of Ge (S) Bathinda And Refixing The Same After Carring Out Repair Work/ Rewiring Accn )Complete All As Specified And Directed By Engineer-In- Charge,
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
3.
Agriculture #11101843 AOC
Tender For Sale Of Scrap. , M.S Scrap The Morinda Coop Suger Mills Ltd: 35 Ton The Ajnala Coop. Suger Mills Ltd: 135 Ton The Batala Coop. Suger Mills Ltd: 12 Ton The Budhewal Coop. Suger Mills Ltd: 45 Ton The Bhogpur Coop Suger Mills Ltd: 150 Ton The Fazilka Coop Suger Mills Ltd: 50 Ton The Gurdaspur Coop Suger Mills Ltd: 50 Ton The Nakodar Coop Suger Mills Ltd: 25 Ton The Nawanshahr Coop Suger Mills Ltd: 182 Ton , C.I Scrap The Morinda Coop Suger Mills Ltd: 10 Ton The Ajnala Coop. Suger Mills Ltd: 6 Ton The Batala Coop. Suger Mills Ltd: 0 The Budhewal Coop. Suger Mills Ltd: 6 Ton The Bhogpur Coop Suger Mills Ltd: 10 Ton The Fazilka Coop Suger Mills Ltd: 10 Ton The Gurdaspur Coop Suger Mills Ltd: 0.5 Ton The Nakodar Coop Suger Mills Ltd: 3 Ton The Nawanshahr Coop Suger Mills Ltd: 5.5 Ton , S.S Material The Morinda Coop Suger Mills Ltd: 0.5 Ton The Ajnala Coop. Suger Mills Ltd: 0 The Batala Coop. Suger Mills Ltd: 0 The Budhewal Coop. Suger Mills Ltd: 0 The Bhogpur Coop Suger Mills Ltd: 2.5 Ton The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 3 Ton The Nakodar Coop Suger Mills Ltd: 2.4 Ton The Nawanshahr Coop Suger Mills Ltd: 2.75 Ton , Old S.S Tubes The Morinda Coop Suger Mills Ltd: 2 Ton The Ajnala Coop. Suger Mills Ltd: 5 Ton The Batala Coop. Suger Mills Ltd: 0.4 Ton The Budhewal Coop. Suger Mills Ltd: 4.2 Ton The Bhogpur Coop Suger Mills Ltd: 6 Ton The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 9 Ton The Nakodar Coop Suger Mills Ltd: 11.5 Ton The Nawanshahr Coop Suger Mills Ltd: 1 Ton , Cast Steel Scrap The Morinda Coop Suger Mills Ltd: 5 Ton The Ajnala Coop. Suger Mills Ltd: 7 Ton The Batala Coop. Suger Mills Ltd: 0 The Budhewal Coop. Suger Mills Ltd: 7 Ton The Bhogpur Coop Suger Mills Ltd: 8 Ton The Fazilka Coop Suger Mills Ltd: 5 Ton The Gurdaspur Coop Suger Mills Ltd: 0 The Nakodar Coop Suger Mills Ltd: 3 Ton The Nawanshahr Coop Suger Mills Ltd: 4 Ton , Old Ss Nickel Screen The Morinda Coop Suger Mills Ltd: 0 The Ajnala Coop. Suger Mills Ltd: 0.05 Ton The Batala Coop. Suger Mills Ltd: 0.3 Ton The Budhewal Coop. Suger Mills Ltd: 0.15 Ton The Bhogpur Coop Suger Mills Ltd: 0.2 Ton The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 0.268 Ton The Nakodar Coop Suger Mills Ltd: 0 The Nawanshahr Coop Suger Mills Ltd: 0.2 Ton , Old Ss Wire Netting The Morinda Coop Suger Mills Ltd: 0 The Ajnala Coop. Suger Mills Ltd: 0.35 Ton The Batala Coop. Suger Mills Ltd: 0 The Budhewal Coop. Suger Mills Ltd: 0.25 Ton The Bhogpur Coop Suger Mills Ltd: 0 The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 0 The Nakodar Coop Suger Mills Ltd: 0 The Nawanshahr Coop Suger Mills Ltd: 0.003 Ton , Old Used Brass Liners The Morinda Coop Suger Mills Ltd: 0.025 Ton The Ajnala Coop. Suger Mills Ltd: 5 Ton The Batala Coop. Suger Mills Ltd: 0 The Budhewal Coop. Suger Mills Ltd: 0.45 Ton The Bhogpur Coop Suger Mills Ltd: 0.8 Ton The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 0.047 Ton The Nakodar Coop Suger Mills Ltd: 0.15 Ton The Nawanshahr Coop Suger Mills Ltd: 0.15 Ton , Tin Tupper The Morinda Coop Suger Mills Ltd: 10 Ton The Ajnala Coop. Suger Mills Ltd: 0 The Batala Coop. Suger Mills Ltd: 0 The Budhewal Coop. Suger Mills Ltd: 10 Ton The Bhogpur Coop Suger Mills Ltd: 0 The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 0 The Nakodar Coop Suger Mills Ltd: 8 Ton The Nawanshahr Coop Suger Mills Ltd: 0 , Workshop Scrap (Baruda) The Morinda Coop Suger Mills Ltd: 1 Ton The Ajnala Coop. Suger Mills Ltd: 5 Ton The Batala Coop. Suger Mills Ltd: 0.5 Ton The Budhewal Coop. Suger Mills Ltd: 0 The Bhogpur Coop Suger Mills Ltd: 10 Ton The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 0 The Nakodar Coop Suger Mills Ltd: 1.5 Ton The Nawanshahr Coop Suger Mills Ltd: 0 , Brown Sugar Empty Bags Of 50 Kg Each. The Morinda Coop Suger Mills Ltd: 2 Ton The Ajnala Coop. Suger Mills Ltd: 0 The Batala Coop. Suger Mills Ltd: 0 The Budhewal Coop. Suger Mills Ltd: 9.987 Ton The Bhogpur Coop Suger Mills Ltd: 0 The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 0 The Nakodar Coop Suger Mills Ltd: 0 The Nawanshahr Coop Suger Mills Ltd: 0.6 Ton , Used Black Polythene Sheets The Morinda Coop Suger Mills Ltd: 0.8 Ton The Ajnala Coop. Suger Mills Ltd: 5 Ton The Batala Coop. Suger Mills Ltd: 0.5 Ton The Budhewal Coop. Suger Mills Ltd: 2 Ton The Bhogpur Coop Suger Mills Ltd: 0 The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 0 The Nakodar Coop Suger Mills Ltd: 3 Ton The Nawanshahr Coop Suger Mills Ltd: 1 Ton , Old Ball Bearing The Morinda Coop Suger Mills Ltd: 0.5 Ton The Ajnala Coop. Suger Mills Ltd: 13 Ton The Batala Coop. Suger Mills Ltd: 0.25 Ton The Budhewal Coop. Suger Mills Ltd: 1 Ton The Bhogpur Coop Suger Mills Ltd: 2.5 Ton The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 0.3 Ton The Nakodar Coop Suger Mills Ltd: 0 The Nawanshahr Coop Suger Mills Ltd: 1.5 Ton , Old Empty Oil Drums (Nos.) The Morinda Coop Suger Mills Ltd: 53 Nos. The Ajnala Coop. Suger Mills Ltd: 350 Nos. The Batala Coop. Suger Mills Ltd: 0 The Budhewal Coop. Suger Mills Ltd: 200 Nos. The Bhogpur Coop Suger Mills Ltd: 400 Nos. The Fazilka Coop Suger Mills Ltd: 0 The Gurdaspur Coop Suger Mills Ltd: 40 Nos. The Nakodar Coop Suger Mills Ltd: 0 The Nawanshahr Coop Suger Mills Ltd: 60 Nos.
Contract Date: Jul 03, 2026 Contract Value : 26.44 Lakh
Cooperative No of Bidders 3
4.
Tourism #11085444 Technical Bid
Tender For Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer. , Supplying And Filling Moorum In Plinth Under Floors, Trenches Including Watering Ramming Consolidating, Dressing, Complete. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones Of Size As Specified In Cement Mortar 1: 4 (1 Cement : 4 Coarse Sand) In Foundation And Basement. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry In Cement Mortar 1:3 (1Cement : 3 Coarse Sand) With Bricks Of Class Designation 75 Kg /Cm2. B. Upto Floor V Level. , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: All Work Up To Plinth Level , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: In Retaining Walls , Return Walls(Any Thk) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets Etc, Upto Floor Five Level. , Providing And Laying In Position Ready Mixed Concrete (Rmc) Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continious Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineer-In-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Suspended Floors, Roofs, Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates. Where Inclination To The Horizontal Does Not Exceed 30° Requiring Shuttering On The Underside Only , Extra To Be Added For Additional Height In Centering, Shuttering Where Ever Required With Adequate Bracing, Propping Etc. Including Cost Of De- Shuttering And De-Centering At All Levels, Over A Height Of 3.5M, For Every Additional Height Of 1M Or Part Thereof. (Plan Area To Be Measured) Suspended Floors, Roofs, Landings, Beams And Balconies (Plan Area To Be Measured) , Providing Tmt Steel Reinforcement Bars Of Sail, Tata, Vizag Made Only (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. Minimum Grade Of Steel - Fe 500 , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4B Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint.In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Colour Coated Galvulium Roofing Sheets Of 0.5Mm Thickness Including All The Accessories (Tata Make) But Excluding The Cost Of Purlins, Rafters, Trusses, Flashings Etc. Complete As Per The Directions Of The Engineer In Charge. , Providing & Fixing In Position Galvalume/Zincalume Flashings, Cappings, Ridges, Gutters Upto 600Mm/610Mm Girth And Min 3.00M In Length (Cold Rolled Steel 550 Mpa Yeild Stress Astm A 446 Grade E) With Hot-Dip Metallic Coating Of Aluminium-Zinc Alloy(Az 150 Galvalume) (150 Gms/Sqm Total Of Both Sides With Al-Zn Composition= 55% & 43.5% Resp. & 1.5% Si Conforming To Astm 792/ As 1397) 0.45 Mm Base Metal Thickness And 0.50Mm Total Coated Thickness, Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respects With Az 150 Gsm Smp Color Coated (20Mic Exterior Coat Of Silicon Modified Polyester Paint System Over 5 Mic Primer And 5 Mic Polyester Back Coat Over 5 Mic Primer) Incl. Fixing To Purlins With No 12X14X55Mm Mechanically Galvanised Hex Head Self Drilling Screws Of The Best Quality As Per As-3566 Class 3-4 Approved, Which Should Be Compatible To Be Used With Sheets. With Integral Washers And Epdm Seals Etc. Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed. , Providing And Fixing M.S. Grill Of Required Pattern In Wooden Frames Of Windows Etc. With M.S. Flats Square Or Round Bars With Round Headed Bolts And Nuts Or By By Screws. Plain Grill , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excludingfixingaccessoriessuchasnuts,Bolts, Fasteners Etc.). , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. Light Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Jet Black With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. ( Price Range 2000 To 2100 Rs Per Sq Mtr.) , Providing And Fixing Granite Stone Slabs (Mirror Polished) 18Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On Cement Paste And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete. Jet Black , Providing And Laying Polished Granite Stone Flooring, Coping In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building, All Complete As Per The Architectural Drawings, With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade, Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. Polished Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. ( Price Range 1550 To 1600 Rs Per Sq Mtr.) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm .80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Fixing 18Mm Thick Polished Black Granite Machine Cut For Kitchen Platforms, Counters, Window Sills, Door Frame, Urinal Partitions , Fascia And Similar Locations Of Required Size Of Approved Shade, Colour And Texture Laid Over 20Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing,Moulding And Polishing To Edge To Give High Gloss Finish, Etc. Complete At All Levels.( Price Range Rs.1500 To Rs.1700 Per. Sq.M ) , Providing 25Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. Size 60 Cm L X45 Cm H X 15 Cm T , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand). 20 Mm Thick. , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 (1 Cement: 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , 12 Mm Thick Cement Plaster 1:4 (1 Cement:4 Fine Sand) , 6Mm Thick Cement Plaster To Ceiling With 1:3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer , Extra For Plastering Done On Moldings, Cornices, Or Arch It Raves Including Neat Finish To Line And Level. In One Coat , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing & Fixing 19Mm Thk Plywood Work In Frames Of Doors Using 19Mm Marine Ply (Waterproof) With All Hardware,And Other Frames And Fixed In Position With 50 Mm Fastners Etc. Complete As Specified As Shown In The Drawings. , Providing And Fixing First Class Indian Teak Wood Moulded Beading To Door And Window Frames With Iron Screws , Plugs And Priming Coat On Unexposed Surfaces Etc. 50X12Mm Size. , Providing And Fixing Block Board Flush Door Shutters 35Mm Thick ( 1St Class Teak Ply On Both Faces), Laminated On Both Sides With 1Mm Thick Laminate Of Approved Brand And Colour Including Cost Of Adhesive, Nails, Screws During Fixing Etc. Complete. , Providing & Fixing Bright Finished Stainless Steel Mortise Latch & Lock With 60 Mm Cylinder And A Pair Of Levers, Handles With Necessary Screws Etc.Complete , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete. 300X 16 X 5 Mm , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete Size 125 X 70 X 4.0Mm , Provided And Fixing 150 Mm Chromium Plated Brass Floor Door Stopper With Rubber Cushion Screws Etc. To Suit Shutters Thickness Complete. , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete. 200 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Dismantling The Tile Work In Floors And Roofs Laid In Cement Including Stacking Of Materials Within 50 Meters Lead For Thickness Of Tiles 10Mm To 25Mm. , Disposal Of Unserviceable Materials Such As Laterite Stones, Bricks, Cement Concrete, Scrap Materials, Excess Earth By Tipper Truck Or As Directed By Engineer In Charge Including Loading, Transportation, Unloading, Levelling Etc At The Risk And Cost Of Agency / Contractor Including Selection Of Site For Disposal With All Lifts And Leads Etc. All Complete. , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Window With 3 Tracks And 2 Shutters Sliding Window With Tobular Frame Ployster Powder If Thicness 75-80 Microns With Approved Standard Accessaries Such As Ball Beaing Rollers, Concealed Lock, 6Mm Thick Plain Clear Glass With Epdm Beading Etc. , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete. 10 Mm Dia , Drilling 150 Mm Deep Hole In R C C And Grouting The Rebar With Lockfix Etc Complete.12 Mm Dia , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead Extra For Dismantling Trusses, Rafters, Purlins Etc. Of Steel Work, For Every Additional Span Of One Meter Or Part Thereof Beyond 10 Mts. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Doors, Windows And Clearestory Windows (Steel Or Wood) Shutters Including Chowkhats Architrave Holdfast Etc. Complete And Staking Within 50 Mt. Lead. Of Area 3 Sq.M. And Below , Dismantling Wood Work Of Area Below 40 Sq.Cm. Wrought Framed And Fixed In Frames, Other Frames And Trusses Including Stacking Of Material Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Main Entrance Gate In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Mahadev Big Mural In Frp As Per Tender Drawing , Providing & Fixing Below Mentioned Items Made In Fiber (Frp/Grp/ Any Other Material Specified By Vendor) Alongwith Fabricating A Rigid Skeletal Frame Work By Welding Steel Bars/Weld Mesh As Per The Desired Size, Shape And Profile Of The Finished Structure .Finish Should Be Simillar To The Photofeatures Approved By The Architect. Rate Should Be Inclusive Of Scaffolding , Reinforcement Welding, Framework As Per Structural Design. Work Should Be As Per Detail Design & Drawing And Satisfactory Of The Architects. Theming Work For Nandi In Frp As Per Tender Drawing , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge , Providing And Fixing Concrete Roof Tiles Of Monier Brand Elabana Series Over Fabrication Structure As Per Manufacture Guidelines, Including Fixing Tiles In Standard Patterns Or As Specified By The Architect. Colour - Orange , Providing And Fixing Monier Concrete Ridges As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Fixing Monier Barge Tiles As Required Over Layer Of Topflex Including All Necessary Fixtures Etc. , Providing And Laying 300X350X160 Mm Thick Decorative Laterite Stone Flooring (Patradevi Stone) Laid On 20 Mm Thick Base Of Cement Mortar 1:4 ( 1Cement :4 Coarse Sand ) Including Maintaining 75 Mm Gap Between Two Stone For Grassing.Gaps To Be Filled With Good Earth For Grassing. All Work Completed As Per Directed By Engineer-In-Charge.(Price Including Stone,Gardening Soil,Fertilizers And Grass Etc Complete) , Supplying And Stacking Of Good Earth ( Garden Soil) At Site Including Royalty And Carriage Upto 1 Km. (Earth Measured In Stacks Will Be Reduced By 20% For Payment). , Spreading Of Sludge, Dung Manure Or/And Good Earth (Garden Soil) In Required Thickness (Cost Of Sludge, Dung Manure Or/And Good Earth To Be Paid Separately). , Supply At Site Of Work/Store Deoiled Neem Cake Duly Packed In Used Gunny Bags As Per Mort & H Specification 308.2 , Supplying Of Sludge Duly Stacked At Site/Store As Per Mort & H Specification 308.2 , Filling Mixture Of Earth & Sludge Or Manure In The Desired Proportion In Trenches Flooding With Water And Leveling (Cost Of Supplying Earth And Sludge Or Manure And Mixing Excluded). , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Rubra , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Saraca Ashoka , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neem , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Nyctanthes , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Peltophorum Pterocarpum , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Bauhinia Purpurea , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Filliciam Decipiens , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cordia Dichotoma , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Cassia Fistula , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Millingtonia Hortensis , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Jacaranda Mimosifolia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Neolamarckia Cadamba , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Thevetia , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Michelia Champaca , Providing, Laying And Planting Various Trees & Palms As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. Plumeria Alba , Supplying & Planting Shrubs, Creepers, Ground Covers, As Listed Below As Per The Mentioned Size Including Adding Fertilizers As Per Planting Schedule, Manure And Neem Cake Etc. Including Their Maintainance Upto 3 Months During Which The Contractor Is Suppose To Maintain All These In All Respects Such As Watering, Pruning, Spraying Of Pesticides, Fungicides, Insecticides, Adding Fertilisers, Removing Of Weeds As Per Specification And Direction Of The Engineer And Also Replacing With Similar Plants In Case Of Death Of Any Plants. The Plant Will Be Selected And Approved By The Engineer Before Plantation. , Providing And Fixing White Vitreous China Type Water Closet Squatting Pan (European Type W.C. Pan) With Dual Flushing (Citren Nelson/ Similar)With Stop Cock Wall Flanges Flush Pipe Or Elbow And Vacuum Breaker Coupling Etc. Including Cutting Making Good The Walls And Floors Where Required. (Excluding Handicap Toilets) , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430 X 260 X 350 Mm And 340 X 430 X 265 Mm Sizes Respectively With Pvc Automatic Flushing Cistern With Fittings, R.S. Or C.I. Brackets, Standard Size Galvanized Steel Flush Pipe And Spreaders With Brass Unions & G.I. Clamps Complete, Including Painting Of Cistern And Fittings, Cutting And Making Good The Walls And Floors Where Required. (A)One Urinal Basin With 5 Liters P .V .C. Automatic Flushing Cistern. , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Including Cutting And Making Good The Walls Where Required. Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws. Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Wall Mixer With 3 In 1 System With 115Mm Long Bend Pipe For Connection To Over Head Shower Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing C.P. Brass Towel Rail Complete With C.P. Brass Brackets Fixed To Wooden Cleats With C. P. Brass Screws. 750X20 , Providing & Fixing Soap Dish Chromium Plated With Brackets Fixed To Wooden Cleats With Cp Brass Screw , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed .110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed. 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating.110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door :110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door :110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door 110Mm , Providing And Fixing Single Y Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, Without Door . 75Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Providing And Fixing R.P.V.C. Vent Cowl: 75Mm , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Cm2 In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar. , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:.B) 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching ,Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work. 32Mm Outer Dia. , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 15Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : (Toilet Internal Ball Valve, 40 Mm Nominal Bore . , Providing And Fixing Non-Return Valve Of Approved Quality :40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality .25 Mm Nominal Bore , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 25 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 32 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 40 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Internal Work Exposed On Wall (Medium Duty Sdr 13.5. 50 Mm , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701;1996. 1000 Lit. Capacity , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70B50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Wall Mounted Street Light Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length Complete. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10Cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-15 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And 3 Phase Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (B) 10 To 40 A , Supply, Installation, Testing And Commissioning Of 3 Kva 1 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. (E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm(Ground To Db) , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Square / Circular Max. 20 W Pendent Light With Having Pressure Die-Cast Aluminium Housing, Polystyrene Diffuser Having System Lumens Output Of Min. 2000 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Max. Ripple Of 5%, Thd10%, P.F. 0.95, Operating Range Of 120-270V, Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70B50 Including Driver, Having Mounting Arrangement With Board For Surface Type Or Suspended Accessories Complete. , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii))
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 1
5.
Defence #10805724 Price Bid
Tender For term contract For 21 Sig Gp Anand Parbat Of Age Br Ii Under Ge North Delhi Cantt 10-1. S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions all as specified. Make:- Jaquar Cat Part No ARI39309 or equivalent as approved by GE 2. S&F in repairs 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make:- Jaquar Cat Part No FLR5281N/ CERA Cat Part No F2008401/Hardware Cat Part No F570022 3. S&F in repairs stainless steel curtain rod 25mm dia including brackets, fixing decorative/fancy stops/nobs/lattu etc complete all as specified and directed. 4. S&F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. 5. S & F CP hand spray health faucet with 1.5m long easy flex tube in chrome finish and wall hook complete all as specified. MAKE : Jaquar Cat Pt No ALD-CHR-583/Hindware/CERA or equivalent as approved by GE 6. S&F stainless steel basket (plain) of size 50cm x 37cm x 10cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 11/25 inch length two way extruded MS galvanised over rollers of approved Make 7. S&F stainless steel thali basket (11-13 division) of size 50cm x 37cm x 20cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded mild steel galvanised over rollers of approved Make 8 S&F stainless steel plate basket (11-13 division) of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18//25 inch length two way extruded mild steel galvanised over rollers of approved make. 9 S&F stainless steel partition basket of size 50cm x 37cm x 16cm made of 4mm thick stainless steel. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extrude MS galvanised over rollers of approved make. 10 S&F stainless steel cutlary basket of size 50cm x 37cm x 10cm made of 4mm thick stainless steel. wire and bottom of stainless steel perforated sheet approved quality with suitable arrangement for fixing telescope basket (Channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 11 S&F stainless steel basket (plain) of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 12 S&F stainless steel bottol full out of size 50cm x 40cm x 16 cm in two tier made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 13 S&F telescope basket/drawar (channel) 18/25 inch length extruded MS galvanised over rollers of approved make 14 M&L for complete removal of existing treatment and preparing surfaces plastered or unplastered surface and applying two coats of plastic emulsion paint over a coat of wall care putty complete all as specified and directed. Note:- Plastic emulsion paint shall be done with roller of required size instead of brush 15 S&F factory made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers ( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. 16 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter molded of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer-In-Charge. 17 S&F FRP (Fiberglass reinforced plastics) chajja 4mm thick of fibreways or equivalent in required colour size and design made by resin transfer moulding (RTM) machine technology having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically and 1 Nos horizontally 50 x 2 mm thick mild steel flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS:6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS:11551 complete with protective gelcat ultravoulet coating on top for complete resistance fromm the extreme of temperature, weather & sunlight. (Note - All the gaps are sealed using silicon sealant from tip and bottom to make it water proof including grouting in existing wall and fitting with suitable screws and fixtures upto 3rd floor level incl all labour material tools and plants, scaffolding safety arrangements quality checks complete in all respect all as specified and directed. 18 S&F Aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wire mesh shutter (2 Nos) of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainless steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyester coat of any shade as approved by GE. (vii) Window shall have provision for installation of window AC/Desert Cooler and provision of window glass shutter, wire mesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. 19 S&F stainleless steel handle heavy duty of 150mm fancy type for shutter etc. complete all as specified and directed. 20 S&F stainleless steel butt hinge heavy duty of 100 to 125mm fancy type for shutter etc. complete all as specified and directed. 21 S&F stainleless steel sliding bolt heavy duty of 300mm long fancy type shutter etc. complete all as specified and directed. 22 S&F in repairs soft close heavy duty steel nickel plated telescopic drawer channel size 500mm ( width required 12.8mm available channel hight 45mm) including fixing arrangement to drawer/ baskets etc complete all as specified and directed. 23 S&F in repiars white composite pattern vitreous china wash down water closet pan with P trap or S trap (pedestal pattern, model Gemma/Rosehip of any colour, twin flush system including soft close seat cover all as specified and directed. Cat Part No. for S trap- GS/WC/1013 and for P trap GS/WC/1008 or Hind Ware Cat Part No 92072 model Cedar. 24 M&L 15mm thick ready mix plaster (Make:- Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall internal or external surfaces finished even and smooth all as specified and directed by GE. 25 S&F for resecuring mild steel gate any type to existing door frame with 3 Nos mild steel hinges as designed including application of oil painting of complete door shutters 26 S&F Factory Made double rebated extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non-toxic additives ( max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face & 1100N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made 27 Providing 30mm thick factory-made wire mesh solid WPC door shutter consisting of density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified company, door to be panneled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. (Conforming to IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. stainless steel butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturers specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item except meshes. 28 M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth all as specified and directed by GE. 30 S&F in repairs fancy type chromium plated two way bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as specified & directed. (Make :-Jaquar cat part no. CON-041 KN). or equivalent as approved by GE. 31 S&F in repair frame less looking mirror fancy type 6 to 8mm thick glass selected quality beveled edges fixed with stainless steel screwed with head of screw not less than 20mm or as approved complete all as specified and directed 1. Old chowkhat with shutters not exc 1.5 Sqm each including all fittings 2. Old chowkhat with shutters exc 1.5 but not exc 4 Sqm including all fittings 3. Old shutter area exc 1 Sqm including all fittings. 4. Old shutter area exc 1 Sqm but not exc 2 Sqm including all fittings. 5. Scrap wood/fire wood 6. Scrap copper 7. Old unserviceable flushing cistern 8 Old brass scrap 9 Scrap iron 10 Old unserviceable PVC tank upto 500 Ltr Capacity including cover 11. Old unserviceable PVC tank 1000 Ltr Capacity including cover 12. Old unserviceable PVC water tank 2000 ltrs including cover 13. Brick bats 14. Brick tiles 15. Old unserviceable AC sheets of any thickness including ridges, corrugated/semi corrugated. 16. Unserviceable AC sheets plain any thickness 17 Old unserviceable Wall/Ceiling board of any thickness any type 18. Old unserviceable CGI sheets plain or corrugated 0.63 mm thick 19 Aluminum Scrap 20 Old unserviceable GI pipe 15mm bore 21. Old unserviceable GI Pipe 20mm bore 22. Old unserviceable GI Pipe 25mm bore 23. Old unserviceable GI Pipe 40mm bore 24. Old unserviceable GI Pipe 50mm bore 25. Old unserviceable CI pipe 75mm bore 26. Old unserviceable CI pipe 100mm bore 27. Old unserviceable wire mesh of any type 28. Old unserviceable wall paneling / partition 29. Old unserviceable steel window any size 30. Old unserviceable barbed wire 31. Old unserviceable stainless steel sink without drainage board any size 32. Old unserviceable stainless steel sink with drainage board 33. Old unserviceable interlocking tiles 34. Old unserviceable PGI sheet any thickness 1 2 35. Old unserviceable CP Bib tap/ stop cock/ pillar cock/ gate valve/ angle valve etc of 15/20mm bore 36. Old unserviceable Bib tap/ stop cock/ pillar cock/ gate valve etc of 15/20mm bore PVC 37. Old unserviceable mixture of any type 38. Old unserviceable PVC pipe any size 39. Old unserviceable LDPE water storage tank 250 litter 40. Old unserviceable PVC sheet cover for water closet 41. Old unserviceable cover for PVC water storage tank 42. Old unserviceable chain link fencing / metal mesh 43. Old unserviceable aluminum door / window any description with fitting 44. Old unserviceable health faucet, Jet spray 45. Old unserviceable PVC cabinet Mirror 46. Old unserviceable Stainless Steel Plate Rack 47. Old unserviceable stainless steel Curtain rod 48. Old unserviceable CP soap dish/ toilet paper holder 49. Old unserviceable towel ring/ towel Rail 50. Old unserviceable CP grating Jali 51. Old unserviceable butt Hinges of any size & any type 52. Old unserviceable stainless steel handle of any type and size 53. Old unserviceable towel rack 54. Old unserviceable stainless steel Cap holder & bracket 55. Old unserviceable steel drawer channel 56. Old unserviceable WPC Jali of any thickness and design 57. Old unserviceable WPC Frame of any size 58. Old unserviceable door glass 59. Old unserviceable door stopper 60. Old unserviceable Peg set 61. Old unserviceable PVC connection 450/600 mm long 62. Old unserviceable floor trap of any type and size 63. Old unserviceable PVC bend ‘T’ (single/double), ‘Y’ (single/double) etc of any size 64. Old unserviceable looking mirror of any type 65. Old unserviceable glass shaft of any type or size 66. Old unserviceable float valve of any type or any size 67. Old unserviceable PVC scrap 68. Old unserviceable post or strut (Wood/Steel/RCC) of any description 69. Old unserviceable Concertina Coil of any size of any description
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
6.
Defence #10742227 Price Bid
Tender For term contract For Artificer Works At Delhi Cantt Area Under Age Br Ii Ge North Delhi Cantt 10-1. S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions all as specified. Make:- Jaquar Cat Part No ARI39309 or equivalent as approved by GE 2. S&F in repairs 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make:- Jaquar Cat Part No FLR5281N/ CERA Cat Part No F2008401/Hardware Cat Part No F570022 3. S&F in repairs stainless steel curtain rod 25mm dia including brackets, fixing decorative/fancy stops/nobs/lattu etc complete all as specified and directed. 4. S&F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. 5. S & F CP hand spray health faucet with 1.5m long easy flex tube in chrome finish and wall hook complete all as specified. MAKE : Jaquar Cat Pt No ALD-CHR-583/Hindware/CERA or equivalent as approved by GE 6. S&F stainless steel basket (plain) of size 50cm x 37cm x 10cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 11/25 inch length two way extruded MS galvanised over rollers of approved Make 7. S&F stainless steel thali basket (11-13 division) of size 50cm x 37cm x 20cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded mild steel galvanised over rollers of approved Make 8 S&F stainless steel plate basket (11-13 division) of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18//25 inch length two way extruded mild steel galvanised over rollers of approved make. 9 S&F stainless steel partition basket of size 50cm x 37cm x 16cm made of 4mm thick stainless steel. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extrude MS galvanised over rollers of approved make. 10 S&F stainless steel cutlary basket of size 50cm x 37cm x 10cm made of 4mm thick stainless steel. wire and bottom of stainless steel perforated sheet approved quality with suitable arrangement for fixing telescope basket (Channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 11 S&F stainless steel basket (plain) of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 12 S&F stainless steel bottol full out of size 50cm x 40cm x 16 cm in two tier made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 13 S&F telescope basket/drawar (channel) 18/25 inch length extruded MS galvanised over rollers of approved make 14 M&L for complete removal of existing treatment and preparing surfaces plastered or unplastered surface and applying two coats of plastic emulsion paint over a coat of wall care putty complete all as specified and directed. Note:- Plastic emulsion paint shall be done with roller of required size instead of brush 15 S&F factory made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers ( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. 16 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter molded of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer-In-Charge. 17 S&F FRP (Fiberglass reinforced plastics) chajja 4mm thick of fibreways or equivalent in required colour size and design made by resin transfer moulding (RTM) machine technology having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically and 1 Nos horizontally 50 x 2 mm thick mild steel flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS:6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS:11551 complete with protective gelcat ultravoulet coating on top for complete resistance fromm the extreme of temperature, weather & sunlight. (Note - All the gaps are sealed using silicon sealant from tip and bottom to make it water proof including grouting in existing wall and fitting with suitable screws and fixtures upto 3rd floor level incl all labour material tools and plants, scaffolding safety arrangements quality checks complete in all respect all as specified and directed. 18 S&F Aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wire mesh shutter (2 Nos) of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainless steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyester coat of any shade as approved by GE. (vii) Window shall have provision for installation of window AC/Desert Cooler and provision of window glass shutter, wire mesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. 19 S&F stainleless steel handle heavy duty of 150mm fancy type for shutter etc. complete all as specified and directed. 20 S&F stainleless steel butt hinge heavy duty of 100 to 125mm fancy type for shutter etc. complete all as specified and directed. 21 S&F stainleless steel sliding bolt heavy duty of 300mm long fancy type shutter etc. complete all as specified and directed. 22 S&F in repairs soft close heavy duty steel nickel plated telescopic drawer channel size 500mm ( width required 12.8mm available channel hight 45mm) including fixing arrangement to drawer/ baskets etc complete all as specified and directed. 23 S&F in repiars white composite pattern vitreous china wash down water closet pan with P trap or S trap (pedestal pattern, model Gemma/Rosehip of any colour, twin flush system including soft close seat cover all as specified and directed. Cat Part No. for S trap- GS/WC/1013 and for P trap GS/WC/1008 or Hind Ware Cat Part No 92072 model Cedar. 24 M&L 15mm thick ready mix plaster (Make:- Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall internal or external surfaces finished even and smooth all as specified and directed by GE. 25 S&F for resecuring mild steel gate any type to existing door frame with 3 Nos mild steel hinges as designed including application of oil painting of complete door shutters 26 S&F Factory Made double rebated extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non-toxic additives ( max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face & 1100N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made 27 Providing 30mm thick factory-made wire mesh solid WPC door shutter consisting of density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified company, door to be panneled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. (Conforming to IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. stainless steel butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturers specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item except meshes. 28 M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth all as specified and directed by GE. 30 S&F in repairs fancy type chromium plated two way bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as specified & directed. (Make :-Jaquar cat part no. CON-041 KN). or equivalent as approved by GE. 31 S&F in repair frame less looking mirror fancy type 6 to 8mm thick glass selected quality beveled edges fixed with stainless steel screwed with head of screw not less than 20mm or as approved complete all as specified and directed 1. Old chowkhat with shutters not exc 1.5 Sqm each including all fittings 2. Old chowkhat with shutters exc 1.5 but not exc 4 Sqm including all fittings 3. Old shutter area exc 1 Sqm including all fittings. 4. Old shutter area exc 1 Sqm but not exc 2 Sqm including all fittings. 5. Scrap wood/fire wood 6. Scrap copper 7. Old unserviceable flushing cistern 8 Old brass scrap 9 Scrap iron 10 Old unserviceable PVC tank upto 500 Ltr Capacity including cover 11. Old unserviceable PVC tank 1000 Ltr Capacity including cover 12. Old unserviceable PVC water tank 2000 ltrs including cover 13. Brick bats 14. Brick tiles 15. Old unserviceable AC sheets of any thickness including ridges, corrugated/semi corrugated. 16. Unserviceable AC sheets plain any thickness 17 Old unserviceable Wall/Ceiling board of any thickness any type 18. Old unserviceable CGI sheets plain or corrugated 0.63 mm thick 19 Aluminum Scrap 20 Old unserviceable GI pipe 15mm bore 21. Old unserviceable GI Pipe 20mm bore 22. Old unserviceable GI Pipe 25mm bore 23. Old unserviceable GI Pipe 40mm bore 24. Old unserviceable GI Pipe 50mm bore 25. Old unserviceable CI pipe 75mm bore 26. Old unserviceable CI pipe 100mm bore 27. Old unserviceable wire mesh of any type 28. Old unserviceable wall paneling / partition 29. Old unserviceable steel window any size 30. Old unserviceable barbed wire 31. Old unserviceable stainless steel sink without drainage board any size 32. Old unserviceable stainless steel sink with drainage board 33. Old unserviceable interlocking tiles 34. Old unserviceable PGI sheet any thickness 1 2 35. Old unserviceable CP Bib tap/ stop cock/ pillar cock/ gate valve/ angle valve etc of 15/20mm bore 36. Old unserviceable Bib tap/ stop cock/ pillar cock/ gate valve etc of 15/20mm bore PVC 37. Old unserviceable mixture of any type 38. Old unserviceable PVC pipe any size 39. Old unserviceable LDPE water storage tank 250 litter 40. Old unserviceable PVC sheet cover for water closet 41. Old unserviceable cover for PVC water storage tank 42. Old unserviceable chain link fencing / metal mesh 43. Old unserviceable aluminum door / window any description with fitting 44. Old unserviceable health faucet, Jet spray 45. Old unserviceable PVC cabinet Mirror 46. Old unserviceable Stainless Steel Plate Rack 47. Old unserviceable stainless steel Curtain rod 48. Old unserviceable CP soap dish/ toilet paper holder 49. Old unserviceable towel ring/ towel Rail 50. Old unserviceable CP grating Jali 51. Old unserviceable butt Hinges of any size & any type 52. Old unserviceable stainless steel handle of any type and size 53. Old unserviceable towel rack 54. Old unserviceable stainless steel Cap holder & bracket 55. Old unserviceable steel drawer channel 56. Old unserviceable WPC Jali of any thickness and design 57. Old unserviceable WPC Frame of any size 58. Old unserviceable door glass 59. Old unserviceable door stopper 60. Old unserviceable Peg set 61. Old unserviceable PVC connection 450/600 mm long 62. Old unserviceable floor trap of any type and size 63. Old unserviceable PVC bend ‘T’ (single/double), ‘Y’ (single/double) etc of any size 64. Old unserviceable looking mirror of any type 65. Old unserviceable glass shaft of any type or size 66. Old unserviceable float valve of any type or any size 67. Old unserviceable PVC scrap 68. Old unserviceable post or strut (Wood/Steel/RCC) of any description 69. Old unserviceable Concertina Coil of any size of any description
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
7.
Defence #10742226 Price Bid
Tender For term contract For 339 Asc Timarpur Area Of Age Br Ii Under Ge North Delhi Cantt 10-1. S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions all as specified. Make:- Jaquar Cat Part No ARI39309 or equivalent as approved by GE 2. S&F in repairs 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make:- Jaquar Cat Part No FLR5281N/ CERA Cat Part No F2008401/Hardware Cat Part No F570022 3. S&F in repairs stainless steel curtain rod 25mm dia including brackets, fixing decorative/fancy stops/nobs/lattu etc complete all as specified and directed. 4. S&F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. 5. S & F CP hand spray health faucet with 1.5m long easy flex tube in chrome finish and wall hook complete all as specified. MAKE : Jaquar Cat Pt No ALD-CHR-583/Hindware/CERA or equivalent as approved by GE 6. S&F stainless steel basket (plain) of size 50cm x 37cm x 10cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 11/25 inch length two way extruded MS galvanised over rollers of approved Make 7. S&F stainless steel thali basket (11-13 division) of size 50cm x 37cm x 20cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded mild steel galvanised over rollers of approved Make 8 S&F stainless steel plate basket (11-13 division) of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18//25 inch length two way extruded mild steel galvanised over rollers of approved make. 9 S&F stainless steel partition basket of size 50cm x 37cm x 16cm made of 4mm thick stainless steel. wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extrude MS galvanised over rollers of approved make. 10 S&F stainless steel cutlary basket of size 50cm x 37cm x 10cm made of 4mm thick stainless steel. wire and bottom of stainless steel perforated sheet approved quality with suitable arrangement for fixing telescope basket (Channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 11 S&F stainless steel basket (plain) of size 50cm x 37cm x 16cm made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 12 S&F stainless steel bottol full out of size 50cm x 40cm x 16 cm in two tier made of 4mm thick stainless steel wire approved quality with suitable arrangement for fixing telescope basket (channel) 18/25 inch length two way extruded MS galvanised over rollers of approved make. 13 S&F telescope basket/drawar (channel) 18/25 inch length extruded MS galvanised over rollers of approved make 14 M&L for complete removal of existing treatment and preparing surfaces plastered or unplastered surface and applying two coats of plastic emulsion paint over a coat of wall care putty complete all as specified and directed. Note:- Plastic emulsion paint shall be done with roller of required size instead of brush 15 S&F factory made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers ( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. 16 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter molded of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer-In-Charge. 17 S&F FRP (Fiberglass reinforced plastics) chajja 4mm thick of fibreways or equivalent in required colour size and design made by resin transfer moulding (RTM) machine technology having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically and 1 Nos horizontally 50 x 2 mm thick mild steel flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS:6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS:11551 complete with protective gelcat ultravoulet coating on top for complete resistance fromm the extreme of temperature, weather & sunlight. (Note - All the gaps are sealed using silicon sealant from tip and bottom to make it water proof including grouting in existing wall and fitting with suitable screws and fixtures upto 3rd floor level incl all labour material tools and plants, scaffolding safety arrangements quality checks complete in all respect all as specified and directed. 18 S&F Aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wire mesh shutter (2 Nos) of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainless steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyester coat of any shade as approved by GE. (vii) Window shall have provision for installation of window AC/Desert Cooler and provision of window glass shutter, wire mesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge. 19 S&F stainleless steel handle heavy duty of 150mm fancy type for shutter etc. complete all as specified and directed. 20 S&F stainleless steel butt hinge heavy duty of 100 to 125mm fancy type for shutter etc. complete all as specified and directed. 21 S&F stainleless steel sliding bolt heavy duty of 300mm long fancy type shutter etc. complete all as specified and directed. 22 S&F in repairs soft close heavy duty steel nickel plated telescopic drawer channel size 500mm ( width required 12.8mm available channel hight 45mm) including fixing arrangement to drawer/ baskets etc complete all as specified and directed. 23 S&F in repiars white composite pattern vitreous china wash down water closet pan with P trap or S trap (pedestal pattern, model Gemma/Rosehip of any colour, twin flush system including soft close seat cover all as specified and directed. Cat Part No. for S trap- GS/WC/1013 and for P trap GS/WC/1008 or Hind Ware Cat Part No 92072 model Cedar. 24 M&L 15mm thick ready mix plaster (Make:- Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall internal or external surfaces finished even and smooth all as specified and directed by GE. 25 S&F for resecuring mild steel gate any type to existing door frame with 3 Nos mild steel hinges as designed including application of oil painting of complete door shutters 26 S&F Factory Made double rebated extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non-toxic additives ( max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200N (Face & 1100N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made 27 Providing 30mm thick factory-made wire mesh solid WPC door shutter consisting of density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified company, door to be panneled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. (Conforming to IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. stainless steel butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturers specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item except meshes. 28 M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth all as specified and directed by GE. 30 S&F in repairs fancy type chromium plated two way bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as specified & directed. (Make :-Jaquar cat part no. CON-041 KN). or equivalent as approved by GE. 31 S&F in repair frame less looking mirror fancy type 6 to 8mm thick glass selected quality beveled edges fixed with stainless steel screwed with head of screw not less than 20mm or as approved complete all as specified and directed 1. Old chowkhat with shutters not exc 1.5 Sqm each including all fittings 2. Old chowkhat with shutters exc 1.5 but not exc 4 Sqm including all fittings 3. Old shutter area exc 1 Sqm including all fittings. 4. Old shutter area exc 1 Sqm but not exc 2 Sqm including all fittings. 5. Scrap wood/fire wood 6. Scrap copper 7. Old unserviceable flushing cistern 8 Old brass scrap 9 Scrap iron 10 Old unserviceable PVC tank upto 500 Ltr Capacity including cover 11. Old unserviceable PVC tank 1000 Ltr Capacity including cover 12. Old unserviceable PVC water tank 2000 ltrs including cover 13. Brick bats 14. Brick tiles 15. Old unserviceable AC sheets of any thickness including ridges, corrugated/semi corrugated. 16. Unserviceable AC sheets plain any thickness 17 Old unserviceable Wall/Ceiling board of any thickness any type 18. Old unserviceable CGI sheets plain or corrugated 0.63 mm thick 19 Aluminum Scrap 20 Old unserviceable GI pipe 15mm bore 21. Old unserviceable GI Pipe 20mm bore 22. Old unserviceable GI Pipe 25mm bore 23. Old unserviceable GI Pipe 40mm bore 24. Old unserviceable GI Pipe 50mm bore 25. Old unserviceable CI pipe 75mm bore 26. Old unserviceable CI pipe 100mm bore 27. Old unserviceable wire mesh of any type 28. Old unserviceable wall paneling / partition 29. Old unserviceable steel window any size 30. Old unserviceable barbed wire 31. Old unserviceable stainless steel sink without drainage board any size 32. Old unserviceable stainless steel sink with drainage board 33. Old unserviceable interlocking tiles 34. Old unserviceable PGI sheet any thickness 1 2 35. Old unserviceable CP Bib tap/ stop cock/ pillar cock/ gate valve/ angle valve etc of 15/20mm bore 36. Old unserviceable Bib tap/ stop cock/ pillar cock/ gate valve etc of 15/20mm bore PVC 37. Old unserviceable mixture of any type 38. Old unserviceable PVC pipe any size 39. Old unserviceable LDPE water storage tank 250 litter 40. Old unserviceable PVC sheet cover for water closet 41. Old unserviceable cover for PVC water storage tank 42. Old unserviceable chain link fencing / metal mesh 43. Old unserviceable aluminum door / window any description with fitting 44. Old unserviceable health faucet, Jet spray 45. Old unserviceable PVC cabinet Mirror 46. Old unserviceable Stainless Steel Plate Rack 47. Old unserviceable stainless steel Curtain rod 48. Old unserviceable CP soap dish/ toilet paper holder 49. Old unserviceable towel ring/ towel Rail 50. Old unserviceable CP grating Jali 51. Old unserviceable butt Hinges of any size & any type 52. Old unserviceable stainless steel handle of any type and size 53. Old unserviceable towel rack 54. Old unserviceable stainless steel Cap holder & bracket 55. Old unserviceable steel drawer channel 56. Old unserviceable WPC Jali of any thickness and design 57. Old unserviceable WPC Frame of any size 58. Old unserviceable door glass 59. Old unserviceable door stopper 60. Old unserviceable Peg set 61. Old unserviceable PVC connection 450/600 mm long 62. Old unserviceable floor trap of any type and size 63. Old unserviceable PVC bend ‘T’ (single/double), ‘Y’ (single/double) etc of any size 64. Old unserviceable looking mirror of any type 65. Old unserviceable glass shaft of any type or size 66. Old unserviceable float valve of any type or any size 67. Old unserviceable PVC scrap 68. Old unserviceable post or strut (Wood/Steel/RCC) of any description 69. Old unserviceable Concertina Coil of any size of any description
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
8.
Defence #10689791 Price Bid
Operation, Repair And Maintenance Of Fire Fighting Equipments For The Year-2022-23 ( Sh: Maintenance On Routine Basis ) - 1 Sub Head - I Pumps & Motorspreventive Maintenance Of The Fire As Per Pump List Attached. The Agency Will Undertake The Maintenance Work Of The Pumps Only Through The Oem Or Oem Authorized Dealer. 2 Site, Model, Make, Primer Mover & Qty Of Pumps 3 Old Magzine -Up150 / 45 ( Kbl ) - Engine Driven - 01 Nos Up150 / 45 ( Kbl ) - Motor Driven - 02 Nos Cphm40 / 26 ( Kbl ) - Motor Driven - 01 Nos 4 Niranjan Auditoriumdsm80 / 36 ( Kbl ) - Engine Driven -01 Nosdsm80 / 36 ( Kbl ) -Motor Driven - 02Nosdb32 / 26 ( Kbl ) -Motor Driven -01 Nosdb50 / 16 ( Kbl ) -Motor Driven -02 Nos 5 New Building Dsm100 / 36 ( Kbl ) - Engine Driven -01 Nosdsm125 / 40 ( Kbl ) -Motor Driven - 01Nosrkb40 / 12L5 ( Kbl ) -Motor Driven -01 Nos 6 Nagrani Bk Db50 / 16 ( Kbl ) -Motor Driven -02 Nos 7 Total ( Pumps ) - 15 Nos 8 Scope Of Work Covered Under The Preventive Maintenece 9 One Visit In Each Three Months Will Be Made By An Oem ( Kbl ) Service Person With Priorintimation. 10 Twobreakdown Visits Included Under Amc. 11 Complete Check-Up Of The Pump Sets As Per Kbl Standards. 12 Check Free Rotation Of Pumps. 13 Check Tightness Of Casing Bolts, Foundation Bolts, And Grease Ms Fasteners. 14 Oil Levels, Grease In Bearings, Condition Of Bearing To Be Checked And Replenished If Required ( Spare Shall Be Provided By Deptt ) 15 Vibration, Noise, Bearing Temperature, Voltage, Speed And Pressure To Be Measured And Recorded. 16 Alignment Of Pump Set To Be Checked And In Case If Required Rectification To Be Carried Out And Readings To Be Recorded. 17 Coupling Bushes, Pins, Rubber Parts To Be Checked And To Be Replaced If Required. ( Spare Shall Be Provided By Deptt ) 18 Mechanical Seal Condition To Be Checked And Suitable Recommendations To Be Made. 19 Service Report Will Be Generated Afterevery Visit Recording Data Anddetails Of Above Checks. 20 Training Will Be Provided To Site Operators To Obtain Optimum Output & Lifeof Equipment. 21 Overhaulingof The Following Pump Including Dismentaling, Machining , Oiling , Greasing , Assembling & Installation At Site Includingloading And Unloading, To And Fro Transportation Ofpump From Nsg Campus Manesar To The Workshop. The Work Will Be Done Through The Oem Or Oem-Authorized Dealer Of The Pumps, And The Repair Work Will Be Given A Three-Month Warranty By The Oem / Authorized Dealer. Model & Make. 22 Up150 / 45 Or Dsm80 / 36 Or Rkb40 / 12L5.Kbl Make 23 Cphm40 / 26.Kbl Make 24 Db32 / 26 Or Db50 / 16.Kbl Make 25 Dsm100 / 36 Or Dsm125 / 40.Kbl Make 26 Replacement Of The Following Spare Parts Of The Existing Kbl Pump Up150 / 45 Kirloskar Make Main Fire Pump Driven By Electric Motor 90Kw / 120Hp Capacitywith A New One If Found Defective, Including Testing, Complete As Required, Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. Thework Of The Pumps Will Be Done Only Through The Oem Or Oem Authorized Dealer. 27 Mechanical Seal 28 Mechanical Seal Plate 29 Sleeve Moc-Bronze ( 17458Cq001012 ) 30 Set Of Gasket Moc- Non Asbestos 31 O- Ring Moc- Natural Rubber 32 Ball Bearing 2877 Moc-Ss ( X630900400000 ) 33 Wear Ring Moc-Bronze ( 1712021991012 ) 34 Rewinding Of ( From 12.5 Hp Up To 120 H.P. Three-Phase Capacity ) Electrical Motors Including All Necessary Material And Of The Same Characteristics As Original With Required Size Of Super Enameled Copper Wire And F Class Insulation Material Including Dismantling, Removing Of Burnt Wires, Cleaning Of Slots, Varnishing, Assembling, Greasing, Testing Etc. Complete As Required Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. Thework Of Rewinding Of Motors Will Be Done Only Through The Oem Or Oem Authorized Dealer. 35 Sub Head - Iifire Alarm System Sitc / Replacement Of Addressable Manual Call Point Complete As Required Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 36 Sitc / Of Addressable Photo Thermal Detector Complete With Mounting Base Complete As Read-Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 37 Sitc Of Intelligent Addressable Programmable Sounder Complete As Required Through Authorised Dealer Or Oem ( Compatible With Est3 Or Equivlent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 38 Sitc Of Addressable Fire Control Module Complete As Requiredthrough Authorised Dealer Or Oem ( Compatible With Est3 Or Equivlent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivqlent 39 Providing, Fixing, Testing & Commissioning Of 15Mm Dia Quartzoid Bulb Type Sprinkler Of Rating 68 Degree Centigrade With Required Accessories ( Pendant / Upright Sprinkler ) 40 Sitc Of Horn Cum Strobe Complete As Read-Through Authorised Dealer Or Oem . ( Compatible With Est3 Or Equivalent Addressable System ) Make- Edward / Apollo / Siemens / Notifier Or Equivalent 41 Sitc Of Wall Speaker 1.5 / 3 / 6 W Metal Box Ceiling / Wall Speaker Complete Etc. As Required Make - Honeywell / Bosch / Ahuja Or Equivalent 42 Dismantling , Cleaning & Re-Fixing Intelligence Detector , Hooter , Mcp & Riincluding Checking, Testing And Connection Etc. As Required. 43 Supply Installation Testing Commissioning Of Smps Device Compatible With Two Loop Firepanel Make Est3 Or Equivalent As Per Direction Of Engg In Charge . 44 Servicing , Commissioning And Reprogramming Of Existed Addressable Fire Alarm Panelcompatible With Est3 Etc. Complete As Required. 45 Sitc Of Protective Cover Locked With Plastic Tie / Metallic Wire Suitable For Addressable Manual Call Pointincluding Dismantling & Re-Fixing Mcp With Necessary Arrangements As Per Direction Of Engineer In Charge Make- Hensel Kg9001 / Honeywell Or Equivalent As Approved By Engg In Charge . 46 Sub Head Iii - Pipes & Assecories Supplying, Fixing, Testing & Commissioning Of Double Flanged Sluice Valve Of Rating Pn 1.6 With Non Rising Spindle, Bronze / Gun Metal Seat, Isi Marked Complete With Nuts, Bolts, Washers, Gaskets And Conforming To Is 780 Of Following Sizes As Required :300Mm 47 Dismantling And Reinstalling The Existing 150 Mm Non-Return Valve In Horizontal Alignment In The Fbc Pipeline, As Well As Providingadditional Quantity Of 150 Mm C Class Heavy Duty Ms Pipeconforming To Is 3589 / Is 1239, Including Welding, Fittings Such As Elbows, Flanges, Nuts, Bolts, Gaskets, Etc., Whichever Are Required To Complete The Work, Painting With Two Or More Coats Of Synthetic Enamel Paint On The Pipe Of The Required Shade, Testing And Commissioning, Etc., As Required. 48 Providing, Installation, Testing & Commissioning Of Water Curtain Nozzle 15 / 20 Mm Dia Nickel Chrome Plated Brass, Bspt, K-Factor As Per Design Consideration Complete As Required 49 Providing, Laying, Testing & Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Is 3589 / Is 1239 Including Welding, Fittings Like Elbows, Tees, Flanges, Tapers, Nuts Bolts, Gaskets Etc. And Fixing The Pipe On The Wall / Ceiling Or On Pipe With Suitable Clamp / Support Frame And Painting With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade Complete As Required : 80 Mm Dia 50 Supplying And Fixing Single Headed External Yard Hydrant Valve With 1 No. 63 Mm Diainstantaneous Fm Gunmetal / Stainless Steel Coupling And Cast Iron Wheel, Isi Marked, Conforming To Is 5290 ( Type A ) With Blank Gunmetal / Stainless Steel Cap And Chain As Required 51 Single Headed Gunmetal 52 Supplying, Fixing, Testing And Commissioning Of Butterflyvalve Of Pn 1.6 Rating With Bronze / Gunmetal Seat Duly Isi Marked Complete With Nuts, Bolts, Washers, Gaskets Conforming To Is 13095 Of Following Sizes As Required : 53 80Mm 54 100Mm 55 150Mm 56 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. 57 Supplying & Replacement Of Weather Proof Hose Cabinet Suitable For External Hydrant / Fbic Fabricated Out Of 2 Mm Thick Ms Sheet With 6 Mm Thick Glazed Glass Door In Front Having Locking Arrangement Having Provision For 02 Nos Rrl Hose Pipes & 01 Nos Nozzlemounted On Wall Or Raise Brick Platform & Duly Painted With Po Redexternally & White Internally With Synthetic Enamelled Paint , Sign Writingetc. Complete In All Respect As Required At Site& Having Min Dimension - 900Mm X 600Mm X 500Mm Deep . 58 Supplying And Fixing 63 Mm Dia, 15 M Long Rrl Hose Pipe With 63 Mm Dia Male And Female Couplings Duly Bound With Gi Wire, Rivets Etc. Conforming To Is 636 ( Type-A ) As Required : Gunmetal Make - Newage / Safex / Safegaurd / Essel / Lifegaurd 59 Providing & Fixing Of Pressure Switch In M.S. Pipe Line Including Connection Etc. As Required. Make Denfoss / Indfos / Sitzer 60 Providing & Fixing Flow Switch In Following Sizes M.S. Pipe Including Connection Etc. As Required. 150 Mm Diamakedenfoss / Indfos / Sitzer 61 Supplying And Fixing Undermentioned Item In Existingdrum & Bracket Arrangementcomplete Connection Etc. Asrequired 62 Water Hose Thermoplastic ( Textile Reinforced ) Type -2 As Per Is: 12585Size - 20 Mm Nominal Internal Dia X 30 Mtr Length Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. 63 20 Mm Nominal Internal Dia Gun Metal Globe Valve With Nozzle On Existing Water Hose With Ss Clampincluding Credit For Existing Gun Metal Globe Valve & Nozzle Material Which Will Be Retained By The Contractor Etc., Complete As Required. 64 Hose Reel Drum With Brackets Conforming To Is 884 Ms Construction Spray Painted In Post Office Red Including Credit For Exisitng Reel Drumwhich Will Be Retained By The Contractor. Etc. Complete As Required. 65 Fabrication Supply Installation Testing Commissioning Mscabinet Made Of 1.2Mm Thick Ms Sheet With4 Mm Thick Transparent Acrylic Sheet Double-Leaf Door On The Front Including Necessary Locking Arrangement Including Mounting On Wall, Suitable To Accommodate Different Typefire Extinguisher Duly Painted With Post Office Red Externally And White Internally With Synthetic Enamel Paint Without Back Cover Including Dismantling & Refixing The Existing Fire Extinguisher Completely Required As Per Direction Of Engineer-In-Charge ( Min Depth 250Mm ) As Per Site Condition For A Fire Extinguisher As Required. 66 Providing & Fixing Msclamp Suitable For Existing Fire Extinguisher ( Dry Powder 06 Kg / Water Spray 09 Ltr / Co2 Type 4.5 Kg ) 67 Sub Head Iv - E &M Workearthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 68 Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 69 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 70 Earthing With Copper Earth Plate 600 Mm X 600 Mm X 3 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal / Coke And Salt As Required. 71 Providing And Fixing 25 Mm X 5 Mm Copper Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Brass Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required 72 Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required 73 Sitc Of Wall Fan 400 Mm Sweep Oscillating Type Having Aerodynamically Designed & Balanced Blade Complete With All Accessories Such As Front Cover, Mounting Accessories I / C Connection Etc. As Reqd.Havells Dzire 400 Or Equivalent In Crompton / Usha 74 Wiring For Submain Wiring Along With Earth Wire With Following Size Of Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recess Medium Class Pvc Conduit As Reqd 75 2X1.5 Sqmm + 1X1.5 Sqmm Earth Wire 76 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5 / 6 A Modular Socket Outlet And 5 / 6 A Modular Switch, Connections Etc. As Required. 77 Providing And Fixing Following Switch Gears, Meters And Accessoriesin Existing Cubicle Panel / Starter Board Including Drilling Holes In Cubicle Panel, Making Connections, Etc. As Required Including Credit For Old Scrap Material Which Will Be Retained By The Contractor Etc., Complete As Required. 78 3Pole, 415V , Power Contactor Ac3 Rating 18 A 79 3Pole, 415V , Power Contactor Ac3 Rating 25A 80 3Pole, 415V , Power Contactor Ac3 Rating 32A 81 3Pole, 415V , Power Contactor Ac3 Rating 70A 82 3Pole, 415V , Power Contactor Ac3 Rating 110 A 83 Overload Thermal Relay Mn2 L&T 9-15A 84 Overload Thermal Relay Mn2 L&T 14-23A 85 Overload Thermal Relay Mn5 L&T 66-110A 86 Add On Block 2No+2Nc 87 Add On Block 1No+1Nc 88 Sub Head V - Fire Fightingequipmentssupply, Installation, Testing And Commissioning Of Ul Listed Abc Map-90% ( Mono Ammonium Phosphate ) Automatic Ceiling Mounted Fire Extinguisher For Oil Charged Transformer Rooms, Capacity 10 Kg, Applicable Fire Classes A, B & C, Ugts Pressure Gauge, Brass Forged Sprinkler Valves With Nozzle And Equipped With Pressure Gauge, External Coating Pure Polyester And Internal Epoxy Polyester Powder Coated, Heat Sensitive Glass Bulb Of 68°C. Make : Firemech / Ceasefire / Minimax / Kanex 89 Providing And Fixing Dry Powder ( Stored Pressure ) Type Portable Fire Extinguisher Of Following Capacity With Mono Ammonium Phosphate Powder 90 % Applicable To Fire Class A, B, C Controllable Discharge Mechanism With Epdm Hose And Nozzle, Ugts Pressure Gauge, Deep Drawm With Mig Welding Technology , External Pure Polyester & Internal Epoxy Polyester Powder Coated , Brass Forged Valves With Safety Pin Of Ss Material And Welding Procedure Approved By Tpi Rating As Per 15683 And Isi Mark With Suitable Fixing Bracket ( Ms ) Etc. As Reqd .Make -Ceasefire / Minimax / Kanex 90 6 Kg Powder Stored Pressure Type 91 Providing And Fixing Co2 Type ( High Pressure ) Type Portablefire Extinguisher Of Following Capacity With Co2 Gas Foo Fire Class B & C Electrical Discharge Controlmechanism Fitted With High Pressure Steel Braided Discharge Nozzle For Dispersed Discharge Of Co2 Enamel Spray Painting Powder Coated Handle , Hot Spinning Seamless Isi Marked Rating As Per Is 15683 With Suitable Fixing Bracket ( Ms ) Etc. Complete As Reqd Make - Ceasefire / Minimax / Kanex 92 4.5 Kg Co2 Portable Fire Extinguisher Type 93 Sub Headvi - Miscellaneous Worksitcdiesel Engine Manual Start ( Air Cooled ) Driven Make Kirloskar Taf1 / Greeves / Field Marshal ( With Std Manual Starting ) Or Equivalent Flexiblly Coupled With Self Priming Pump Kirloskar Sp3l Or Equivalent In Crompton / Wilo , Suction- 80Mm Delivery - 80Mm Mounted On Movable Trolley Fabricated Out Of C Channel Complete With Solid Wheel With Movable Handle Arrnagement & Side Open Canopy Of Ms Sheet. [ Warranty -01 Year ] 94 Supplying, Installation, Testing & Commissioning Of 600 Kva, 50 Hz, Servo Motor Operated Line Voltage Corrector, Copper Wound, Indoor, Continuous Duty, Three Phase, Suitable For 3 Phase Unbalanced / Balanced Input Voltage And Unbalanced / Balanced Load Conditions, Which Shall Comprise Three Nos. Fully Ic Controlled Sensing Circuits Microprocessor Based, With Built-In Filters To Improve The Output Wave To Be Pure Sinusoidal And Control Each Phase Individually. Conforming To Is 9815:1994 With Input Voltage 300-460V Output 415 ( As Set Output Voltage ) , + -1%, Naturally Oil Cooledwith First Filling Of Transformer Oiland Necessary Bypass Arrangements, Ms Tank Enclosure Mounted On Wheels, Withdigital Display Having Facilities To Show Fault Indication, Manual / Auto Indication, Manual / Auto Selection Switch, Output Voltage Increase / Decrease Switch, Input / Output Voltage Indication, Load Current Indication, Including Dismantling And Credit For The Existingkva Stabilizer With Transformer Oil. The Stabiliser Should Be Guaranteed For 12 Months From Commissioning For Any Manufacturing Defects. In The Event Of Any Failure Within The Above Period, Replacements Or Rectification Of Parts Shall Be Free Of Cost. The Quoted Rate Should Include Credit For Existing600 Kva Stabilizer With Transformer Oil Which Will Be Retained By The Contractor. ( Make-Vinitec Electronic Laboratory / Precision Control Instruments / Selvon Instruments Pvt. Ltd / Automatic Electric ( Ae ) ) / Purevolt ) 95 Sitc Oflead Acid Battery 150Ah, 12V Including The Dismantling Of Existing Battery, Including Credit For Existing Unserviceable Battery Of The Same Rating Which Will Be Retained By The Contractor Etc., Complete As Required. [ Warranty-36Month ] Make -Exide Xp1500 Or Equivalent In Amaron & Luminuous . 96 Sitc Of 7Ah, 12 V, Vrla Maintenance-Free Battery Including The Dismantling Of Existing Battery, Including Credit For Existing Unserviceable Battery Of The Same Rating Which Will Be Retained By The Contractor Etc., Complete As Required. [ Warranty-36Month ] Make -Exide12bv7b Or Equivalent In Amaron & Luminuous . 97 Supplying & Fixing Pvc Suction Hose Pipe Isi Marked Size 75 / 80Mm ( Make Texmo Code - A0695 Or Equivalent 98 Providing & Fixing Cast Ironfoot Valve Size 80 Mm To End Of Pvc Hose Suction Pipe Etc. Complete As Required ( Make - Kirloskar / Sant / Cri / Kartar )
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
9.
Communications and Information Technology  #10431546 Price Bid
Tender For Misc Civil Repair Works In Qtr. No. T 20/3 At Atul Grove Road, New Delhi.; 1. Acrylic Emulsion Paint Asian (Royale), ICI (Velvet), Berger (Luxol Silk), Nerolac (Allscapes) 2. Premium Acrylic Smooth Exterior Paint Apex Ultima of Asian paints, Weather Coat All Guard of Berger Paint or equivalent. 3. Aluminium Composite Panel Alpolic, Aluco Bond, Reynobond, Euro bond, Al-stone, Aludecor. 4. Aluminium Extrusions Hindalco, Indalco, Jindal. 5. Aluminum Sections Hindalco, Indalco, Jindal. 6. Board & Plywood Duro, Green, Century. 7. Ceramic/Rectified Tiles Premium double charge tiles of: -Kajaria, RAK, HR Johnsons 8. CP fittings Hindware, Johnson, Marc, Cera. 9. CPVC Pipes Astral, Flowguard, Ashirvad, finolex, supreme 10. Designer coloured cement concrete floor tiles for external used / Concrete paver blocks. Ultra, Nitco, or Equivalent (mandatory tests to be performed before execution). 11. Epoxy Primer & Paints Berger, Pidilite, SIKO, Asian. 12. Float Glass Modi Float, Saint Gobain, Tata. 13. Flush Doors (ISI Mark only) Green, Duro, Century or Equivalent (mandatory tests to be performed before execution). 14. Galvanized/Stainless Steel Anchor Fasteners Arrow, Hilti, Fischer, Hatticth 15. Gun Metal Gate Valve Zoloto, Leader, SAINT 16. Gypsum Board False Ceiling Boral Gypsum, Gypsum India Limited, USG, St. Gobain (Gyproc) 17. Hardner Hard crete of Snowcem India, MC Deritop F.H. 18. Hydraulic Door Closer Hardwyn, Godrej, Dorma, Sandhu. 19. Hydraulic Floor spring Hardwyn, Godrej, Dorma, Sandhu. 20. Laminate Greenlam, Decolam, Century, Formica. 21. Melamine Polish Melamine Gold of Asian Paint, Wudfin of pidilite, Timbertone of ICI Dulux. 22. M. S. Pipe Electro Steel, Apollo (ISI), Jindal, Tata 23. Marine Plywood / BWP Ply Century, Green, Duro 24. Oil Bound Distemper Asian (Tractor), ICI (Maxi lite), Berger (Bison) Nerolac (NAD) 25. Sanitary fittings Parryware, Hindware, Cera, Johnson. 26. Plastic Connection Pipe Parryware, Kamal Delux. 27. Ply Wood Duroply, Green ply, Centurypoy 28. Pre-coated GI sheet for roofing Jindal Saw, Tata Blue Scope. 29. Polymer Modified Cementitious grout Bal-Endura, Pidilite, Ceco. 30. Pre-laminated Particle Board IS : 12823 (Gr-I, Type-II) Action TESA, Kitlam, Archid Ply, Asis, Green Lam 31. Primer Asian, ICI DuLux, Nerolac 32. PVC Rain Water Pipe & Fitting IS:13592 Type A Finolax, Supreme, Plasto. 33. PVC Shutter Rajshri, Sintex, Akal America. 34. PVC Tank (ISI Marked) Sintex, Star, Lotus, Plasto, Supreme. 35. R. C. C. Pipes (NP-2) ISI Make 36. Solid Plastic Seat Cover for EWC EWC standard seat cover white of Perryware/Hindware/ Neycer, Cera. 37. Stainless Steel Jindal Stainless Steel, Salem Steel 38. Stainless steel Sink with or without Draining board. Nirali, Hindware, Frankee, Cobra 39. Structural Silicon Sealant Dow Corning, Wacker, GE. 40. Structural steel section TATA, SAIL, RINL, Jindal. 41. Synthetic Enamel Paints ICI(Dulux), Asian (Apcolite), Berger (Luxol), Nerolac (NST) 42. Textured Exterior wall paint Snowcem, ICI dulux, Asian. 43. Towel Ring/Towel Rod/Towel Rack. Marc, Jaquar, 44. Tubular Section Windows M/S classic Engineers & Fabricator, Raipur, M/s JK Enterprises, Jaipur. 45. TMT Bars As per criteria laid down in Para 4.3 of Part-B 46. Vitrified Tiles First quality full body tiles of Orient Bell, Kajaria, RAK Ceramics, Johnson, NITCO, RESTILE. 47. Waste Pipe Kamal with brass checknut, Viking 48. Water Proofing Compound (Liquid) Pidiproof Ltd., Sico, Impermo 49. Wire mesh Sterling, Trimurty welded mesh. 50. White Cement JK, Birla etc 51. Wall Putty JK, BIRLA, Asian 52. Work Stations/ Modular Furniture Godrej, Wipro 53. Stoneware pipe and Gully Trap Perfect or equivalent 54. PVC flushing System Parryware, Johnson, Commander 55. Tactile Tiles Johnson or equivalent 56. Plastic Emulsion Paint Asian, ICI, Berger, Nerolac 1 By Mechanical Transport including loading, unloading and stacking 1.1 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - Item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. 15 cum 494.10 7412.00 2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 2.1 1:2:4 (1 Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 1 cum 9895.20 9895.00 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 3.1 Cement mortar 1:6(1 cement : 6 coarse sand) 0.3 cum 9105.95 2732.00 4 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : 4.1 Red sand stone 3 sqm 1833.25 5500.00 5 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 5.1 Granite stone slab of colour black, Cherry/Ruby red 5.1.1 Area of slab over 0.50 sqm 2.1 sqm 5136.30 10786.00 6 Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. 3.5 metre 568.55 1990.00 7 Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. 7.1 Wedge expansion type 7.1.1 Fastener with threaded dia 10 mm 20 each 40.00 800.00 8 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 40 sqm 1267.95 50718.00 9 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 9.1 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 5 sqm 2172.10 10861.00 9.2 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 10 sqm 2093.70 20937.00 10 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 10.1 Fixed to steel windows by welding 100 kg 219.10 21910.00 11 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) 11.1 300x16 mm 6 each 216.55 1299.00 12 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 12.1 200x10 mm 6 each 69.40 416.00 13 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 13.1 125 mm 6 each 39.95 240.00 14 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 14.1 1.0 mm thick 30 sqm 897.30 26919.00 15 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 60 kg 117.35 7041.00 16 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Assistant Engineer Contractor Page 42 of 47 16.1 Using flats 30x6 mm for diagonal bracbraces and central cross piece 2.2 sqm 5563.75 12240.00 17 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 17.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 60 kg 141.70 8502.00 18 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ LType sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 18.1 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 80 kg 181.25 14500.00 19 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. 19.1 Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides 4 sqm 844.70 3379.00 20 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 20.1 4.0 mm thick glass panes 4 sqm 1064.65 4259.00 21 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 45 sqm 1330.00 59850.00 22 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 22.1 110 mm diameter 12 metre 377.40 4529.00 23 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. 23.1 Single tee without door 23.1.1 110x110x110 mm 4 each 221.35 885.00 23.2 Bend 87.5° 23.2.1 110 mm bend 4 each 150.35 601.00 24 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 100 sqm 156.05 15605.00 25 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 25.1 One or more coats on old work 100 sqm 102.80 10280.00 26 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 26.1 With cement mortar 1:4 (1cement: 4 coarse sand) 10 sqm 560.50 5605.00 27 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 27.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 1.5 sqm 1090.65 1636.00 28 Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. 1 each 134.10 134.00 29 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 29.1 Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 1 cum 2434.25 2434.00 30 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 30.1 Of area 3 sq. metres and below 4 each 367.20 1469.00 31 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 2.2 sqm 266.45 586.00 32 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 40 sqm 54.65 2186.00 33 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 33.1 W.C. pan with ISI marked white solid plastic seat and lid 1 each 6515.55 6516.00 34 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: 34.1 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 1 each 1879.20 1879.00 35 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 35.1 Kitchen sink without drain board 35.1.1 610x510 mm bowl depth 200 mm 1 each 4940.80 4941.00 36 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 1 each 349.15 349.00 37 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 37.1 Flexible pipe 37.1.1 32 mm dia 2 each 119.55 239.00 38 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 1 each 1607.95 1608.00 39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 39.1 20 mm nominal dia Pipes 15 metre 335.00 5025.00 40 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 40.1 20 mm nominal dia Pipes 25 metre 537.60 13440.00 41 Providing and fixing uplasticised PVC connection pipe with brass unions : 41.1 45 cm length 41.1.1 15 mm nominal bore 3 each 97.75 293.00 42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 500 per litre 11.00 5500.00 43 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 43.1 15 mm nominal bore 4 each 798.95 3196.00 44 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 44.1 15 mm nominal bore 6 each 574.30 3446.00 45 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 45.1 15 mm nominal bore, 105 mm long, weighing not less than 138 gms 1 each 182.10 182.00 46 Strengthening of damaged RCC celing after removing the loose concrete & clean the surface with water and wire brush after that applying a thick layer of cement slurry and providing PCC 1:1.5:3 (1 cement :1.5 coarse sand : 3 stone aggregate of 12.5 mm nominal size)in two layers each of 25 mm average thickness by applying a coat of neat cement slurry before each layer of cement concrete with a suitable time gap for proper setting/hardening and finally finish with 12 mm thick cement plaster of 1:3 ( 1 cement : 3 fine sand) etc all complete as per direction of Engineer in Charge. 4 sqm 1449.64 5799.00 47 Credit of material received from dismantling old damaged wooden door 4 each -249.93 -1000.00 48 Credit of material received from dismantling Steel scrap 20 kg -24.99 -500.00 49 Uprooting & removal of wild growth of vegetation on terrace, walls, drainage system and water supply system with proper treatment with chemicals i/c repairing of walls i/c charges of labour ,T&P and material I/C scaffolding system all height etc complete as per direction of Engineer in charge. 4 each 431.82 1727.00 50 Providing and fixing GI tank nipple of 15mm nominal dia of approved quality all complete as per Engineer in Charge. 2 each 321.59 643.00 51 Repair of steel doors, windows or clerestory windows by welding i.e. necessary hinges , flats etc where ever complete and making them functional by scrapping plaster, oiling, greasing, welding of broken hinges, upto five floors as per direction of Engineer in charge. 4 each 383.97 1536.00 52 Providing & fixing door interlock on MS door by welding all complete as per direction of Engineer in charge. 1 each 1238.12 1238.00 53 Providing and fixing 1mm thick aluminium sheet on the back side of door to prevent the door from seepage including fixing nails etc as per direction of EIC. 2 sqm 412.14 824.00 54 Credit of material received from dismantling old damaged water tank of capacity upto 1000ltrs. 1 each -126.28 -126.00 55 Providing and fixing stainless steel grating round of 100mm dia of approved quality all complete as per Engineer in Charge. 2 each 184.94 370.00 56 Providing and fixing 110 mm diameter unplasticised Rigid PVC (working pressure 6 kg/ cm 2) soil, waste and vent pipes water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 4 metre 557.85 2231.00 57 Providing and fixing 110 mm unplasticised PVC moulded bend (working pressure 6 kg/ cm2) soil, waste and vent pipes water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 2 each 377.77 756.00 58 Providing and fixing CPVC Union 20 mm nominal bore of approved quality & make and as per the direction of Engineer-in-charge. 6 each 211.10 1267.00 59 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Two or more coats old work 250 sqm 113.02 28255.00
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
10.
Petroleum and Natural Gas #9544088 Technical Bid
Tender For Composite Works For Ambient Air Heating System Project At Kll Dabhol; 1 PIPING-OFFSITES 2 PIPING (ABOVE GROUND) :-Transportation of all piping items from Owners storage point to work site/work shop; fabrication including cutting, edge preparation, (inclusive of grinding the edges of pipe, pipe spools, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required); fitup, bending, preheating wherever required, welding, threading, and laying of pipes and pipe spools (spools along with supports) of all types and thickness over sleepers, overhead on racks and at all elevations, hook-ups with existing piping, connecting with equipment nozzles, strainers, steam traps, static mixers, sight flow indicators, thermal sleeve, orifice assemblies, spray nozzles, rotameters, tappings for pressure gauges, thermowells, sample connections, sample coolers, closed sample system cabinets etc. and fixing of gaskets, bolts, nuts including application of torque wherever requiredandall other inline instruments and fittings, like elbows, reducers, tees, flanges, spectacle blinds and spacer and blinds, piping specials such as mitres and fabricated fittings, vents, drains (but excluding reinforcingpads), SW valves upto 1.5 NB, Steam Supply/ Condensate Recovery stations(Cast/Fabricated), Supplyandwelding of Strip as per EIL Std 7-51-0112 to all pipes before hydro-testing at exit points of Units for earthing purpose; alignment, cleaningandflushing by water/compressed air,hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified draining, drying by compressed air, performing Positive Material Identification(PMI) using alloy analysers, completing all such works in all respects (including preparation of isometrics as mentioned in the Scope of Work for the job) as per the specifications, drawings and instructions of Engineer-in-Charge. PMI shall be performed by third party as defined in PMI spec.Rates for tubing (if any) shall include rates for valves, fittings, all in line instruments and testing etc. Carbon steel piping includes LTCS piping also. Erectionof all inline instruments like flow instrumentsandspecialty items like static mixers, sample coolers, thermal sleeve, air mixers, exhaust head, rupture disk, flow meters, venturi tube, flame arrestor, thermal flow switch etc. except valve shall be considered as part of piping and separate payment shall not be made on this account. Note : Contractor to refer to Instrumentation SOR for specific details and rates of Instrumentation items not covered herein. 3 CARBON STEEL PIPING (NON IBR); THK. <= 10MM 4 FABRICATION (BUTT WELD- MANUAL) 5 NB UPTO 1.5 INCH 6 NB 2 INCH - 6 INCH 7 NB 8 INCH - 14 INCH 8 NB 16 INCH - 24 INCH 9 NB 26 INCH - 36 INCH 10 FABRICATION (FILLET WELD) 11 NB UPTO 1.5 INCH 12 ERECTION (OTHER THAN SPOOL) 13 NB UPTO 1.5 INCH 14 NB 2 INCH - 6 INCH 15 NB 8 INCH - 14 INCH 16 NB 16 INCH - 24 INCH 17 NB 26 INCH - 36 INCH 18 CARBON STEEL PIPING (NON IBR); THK. > 10MM AND <= 20MM 19 FABRICATION (BUTT WELD- MANUAL) 20 NB 8 INCH - 14 INCH 21 NB 16 INCH - 24 INCH 22 NB 38 INCH - 48 INCH 23 ERECTION (OTHER THAN SPOOL) 24 NB 8 INCH - 14 INCH 25 NB 16 INCH - 24 INCH 26 NB 38 INCH - 48 INCH 27 STAINLESS STEEL PIPING (NON-IBR); THK. <= 10MM 28 FABRICATION (BUTT WELD- MANUAL) 29 NB UPTO 1.5 INCH 30 NB 2 INCH - 6 INCH 31 FABRICATION (FILLET WELD) 32 NB UPTO 1.5 INCH 33 ERECTION (OTHER THAN SPOOL) 34 NB UPTO 1.5 INCH 35 NB 2 INCH - 6 INCH 36 VALVES :- Transportation of all types of valves (Including special valves and motor operatedvalves) from Owners storage points to contractors stores/worksite and installation of valvesfor all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. Note : For PRDS, PSVs, TSVs, Control valves, On-Off/Shutdown valvesandSelf actuating valves all details and rates shall be as per Instrumentation SOR. 37 FLANGED/WAFER VALVES INCLUDING MOV (UPTO 600#) 38 NB2.000 INCHES 39 NB3.000 INCHES 40 NB4.000 INCHES 41 NB6.000 INCHES 42 NB8.000 INCHES 43 NB 10.000 INCHES 44 NB 12.000 INCHES 45 NB 20.000 INCHES 46 NB 24.000 INCHES 47 NB 42.000 INCHES 48 SPRING SUPPORT ASSEMBLIES :- Transportation of all types of spring support assemblies from Owners storage points to contractors stores/worksite and installation of spring support assemblies for all rating including assembly, if any, fixing of gaskets bolts/nuts, welding attachments wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. Contractor to ensure that travel stops are removed and spring is locked in cold load position for Hydrotest. It shall be ensured that locking devices are removed and springs are properly set at hot load position during commissioning. 49 SOR Sl. No.: 49 || PART NO: 0 || SOR NO: B861-000-16-43-PK-SOR-3001-0-0M ||ITEM NO: M21901000000 50 BOLT TENSIONING :- Carrying out tensioning of bolted joints on all types of piping as called for in EIL Specification No.6-76-0002 on already erected system including supply of all materials, recording devices, instruments etc; Providing all normal and special equipment and gadgets, skilled / un skilled labour, specialist, supervisory staff and completing the work in all respects as per specifications and instructions of engineer-in-charge. some joints may require bolt tensioning more than once, but, payment for one joint shall be made only once. 51 150# JOINTS 52 NB 12.000 INCHES 53 NB 16.000 INCHES 54 NB 18.000 INCHES 55 NB 20.000 INCHES 56 NB 24.000 INCHES 57 NB 42.000 INCHES 58 300# JOINTS 59 NB 12.000 INCHES 60 NB 24.000 INCHES 61 REINFORCING PADS FOR PIPES :- Fabrication ofreinforcingpads for pipeconnection wherever required (from pipes only suppliedbytheOwner) and erection, fitup, weldingandtesting (including DP/MP) if required of the same and performing Positive Material Identification(PMI) using alloy analysers as per the specifications, drawings and instructions ofthe Engineer-in-Charge. Note: Sizes mentioned forReinforcing Pads are for branch pipe 62 C.S REINFORCING PADS 63 NB2.000 INCHES 64 NB3.000 INCHES 65 NB6.000INCHES 66 NB8.000 INCHES 67 NB 10.000INCHES 68 NB 12.000 INCHES 69 NB 18.000INCHES 70 NB 24.000 INCHES 71 NB 28.000 INCHES 72 RADIOGRAPHY :- Performance of radiographic inspection on piping of all typesandthicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but required to perform the work as per specificationsand instructions of Engineer-in-Charge. Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractors fault and for additional radiography necessitated due to poor performance of contractors welders shall be done at contractors cost) Note: Unit for radiography quantity is Nos of circumferencial weld joints. 73 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF JOB NDE SPECIFICATION) 74 NB0.750 INCHES 75 NB1.000 INCHES 76 NB1.500 INCHES 77 NB2.000 INCHES 78 NB3.000 INCHES 79 NB4.000 INCHES 80 NB6.000 INCHES 81 FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lV OF JOB NDE SPECIFICATION/AS/SS) 82 NB2.000 INCHES 83 FOR JOINTS ABOVE THK. 8MM 84 NB8.000 INCHES 85 NB 12.000 INCHES 86 NB 18.000 INCHES 87 NB 24.000 INCHES 88 NB 42.000 INCHES 89 DYE PENETRATION/MAGNETIC PARTICLE TEST :- Performance of magnetic particle/ dye penetrant test including supply of all necessary materials, equipment and labour for carrying out the work as per specification and directions of Engineer-in-Charge. 90 DYE PENETRANT TEST 91 MAGNETIC PARTICLE TEST 92 PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY OWNER) :- Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method using die), turn buckles, saddles, guides,special supports, pads(including corrosion pads & protection shields), providing and welding of stiffeners as per drawings, T post etc. of all types including supply and application one coat of primer, all necessary equipments, consumables, labour,returning surplus materials and scrap etc to owners storage points and completing work as per drawings, specifications and instructions of Engineer-in-charge. Modifications/rectifications, if required; andadjustment/ alignment during precommisioning, commisioning as per the instructions ofEngineer-in-charge. Fabrication of extension of spindle for valves, provision of locking arrangement, etc. shall also be considered under this item. 93 DUMMY PIPE SUPPORTS FOR C.S (OWNER SUPPLIED) 94 DUMMY PIPE SUPPORTS FOR S.S (OWNER SUPPLIED) 95 PIPE SUPPORTS (FROM MATERIALS SUPPLIED BY CONTRACTOR) :- Fabrication, erection(at all elevations) of pipe supports like shoes, cradles,hangers, clamps(of all sizes/thicknesses manufactured by forming method using die), turn buckles, saddles, guides,special supports, pads(including corrosion pads & protection shields), providing and welding of stiffeners as per drawings, T post etc. of all types including supply and application one coat of primer, all necessary equipments, consumables, labour, and completing work as per drawings, specifications and instructions of Engineer-in-charge. Modifications/rectifications, if required; andadjustment/ alignment during precommisioning, commisioning as per the instructions ofEngineer-in-charge. Fabrication of extension of spindle for valves, provision of locking arrangement, etc. shall also be considered under this item. 96 C.S STRUCTURAL STEEL (CONTRACTOR SUPPLIED) 97 S.S STRUCTURAL STEEL (CONTRACTOR SUPPLIED) 98 DUMMY PIPE SUPPORTS FOR C.S (CONTRACTOR SUPPLIED) 99 DUMMY PIPE SUPPORTS FOR S.S (CONTRACTOR SUPPLIED) 100 WOODEN/HIGH DENSITY PUF SUPPORTS FOR COLD LINES :- Supply, shaping, positioning and fixing of cold line supports as per EIL pipe support standard having the following specifications: Wood specification:Hard wood, chemically treated with creosote under pressure. Quality of wood to conform class-I durability as per IS-3629 & Grade-I timber of Group-A withpermissible compression strength of 70 Kg/cm2 perpendicular to grains as per IS-883. PUF specifications: Density for lines upto 6 NB : 240 kg/cm3 Density for lines above 6 NB : 320 kg/cm3 101 WOODEN BLOCKS 102 HIGH DENSITY (240 Kg/Cu.M) PUF BLOCKS 103 HIGH DENSITY (320 Kg/Cu.M) PUF BLOCKS 104 CHEMICAL CLEANING/PICKLING :- Cleaning and pickling of equipment/pipeline includng preparation of circulation loop, supply of temporary piping, pumps, heater coils, gaskets, thermometer, hydrometer, valve, test coupon, spares, laboratoryfacilities, with all accessories for conducting test, chemicals, safety accessories and also providing or hiring all necessary equipment and whatever else even though not expressly mentionedhereinandinspecificaions but required to perform the work as per specifications and instructions ofEngineer-in-Charge. 105 PASSIVATION OF COOLING WATER LINES 106 NB0.500 INCHES 107 NB0.750 INCHES 108 NB1.000 INCHES 109 NB1.500 INCHES 110 NB2.000 INCHES 111 NB3.000 INCHES 112 NB4.000 INCHES 113 NB6.000 INCHES 114 NB8.000 INCHES 115 NB 10.000 INCHES 116 NB 12.000 INCHES 117 NB 14.000 INCHES 118 NB 16.000 INCHES 119 NB 18.000 INCHES 120 NB 20.000 INCHES 121 NB 24.000 INCHES 122 NB 42.000 INCHES 123 FABRICATION & ERECTION OF BLINDS/SPECTACLE BLINDS/SPACER & BLINDS ETC. :- Transportation from owners storage point to work site, fabrication and erection of blinds, spectacle blinds, spacers & blinds of all ratings from plate material of all thicknesses supplied by owner as free issue; cutting, edge preparation, rolling, fit up, welding, cleaning, testing (hydrotesting, MP/DP, radiography), wherever required bolts nuts & gaskets including supply of necessary equipment, consumables, labour etc as per standards / specifications and directions of Engineer-in-charge 124 BLINDS 125 NB0.750 INCHES 126 NB1.000 INCHES 127 NB1.500 INCHES 128 NB2.000 INCHES 129 NB3.000 INCHES 130 NB4.000 INCHES 131 NB6.000 INCHES 132 NB8.000 INCHES 133 NB 12.000 INCHES 134 NB 24.000 INCHES 135 NB 42.000 INCHES 136 SPECTACLE BLINDS 137 NB2.000 INCHES 138 NB3.000 INCHES 139 SPACERS & BLINDS 140 NB 24.000 INCHES 141 NB 42.000 INCHES 142 SUPPLY OF STUDS ALONG WITH NUTS: Supply as per Technical Notes for Fasteners (6-44-0057) from Vendor enlisted in Project Master Supplier List of Studs along with two nutsfor diameter < 1 and 3 nuts for diamemter >= 1of nuts, as per the direction of Engineer in-charge. All Alloy steel fasteners used in SS Piping shall be Hot Dip Galvanized. 143 AS FASTENERS(ASTM A193 GR.B7/B7M/A194 GR.2H/2HM) 144 MODIFICATION/EXTRA WORKS (IF ANY) :- Cutting, bevelling, fitup, welding of different sizes of CS/AS/SS/Higher Alloy piping of all types and thicknessess in shop, in position, on ground/overhead on rack and at all elevations; transportation of pipes, fittings, flanges etc from owners storage point to work site/ work shop, making necessary scaffoldings, consumables, machinery, tools, tackles, labour and supervision including attending repairs for completing the work as per the instruction of Engineer-in-charge. 145 FLAME CUTTING C.S PIPINGIBR/NON IBR 146 HACKSAW CUTTING C.S PIPINGIBR/NON IBR 147 BEVELLINGC.S PIPINGIBR/NON IBR 148 FITUP & WELDINGC.S PIPINGIBR/NON IBR 149 FLAME CUTTINGS.S PIPINGIBR/NON IBR 150 HACKSAW CUTTINGS.S PIPINGIBR/NON IBR 151 BEVELLINGS.S PIPINGIBR/NON IBR 152 FITUP & WELDINGS.S PIPINGIBR/NON IBR 153 REMOVAL ERECTED PIPING(ABOVE GROUND) :- Removal of piping existing/ erected including SW valves for modification as required as per Drawings/P and IDs/instructions of Engineer-in-charge at all elevations, including providing assistance to owner for draining, cleaning and purging of the lines to be removed , unbolting of flanged joints /cutting of pipe lines wherever required, installation of flanges and blind flanges, removal of insulation from insulated lines, removing supports, steam tracers, all fittings and flanges, instruments etc, cutting of pipes in appropriate length for transporting purposes, cleaning, flushing, drying and transporting all materials to storage point(within the complex battery limits) designated by Owner/EIL including stacking of material and disposing of waste etc as instructed by Engineer-in-charge. 154 C.S/A.S PIPING 155 S.S PIPING 156 REMOVAL OF ERECTED VALVES (ABOVE GROUND) :- Removal of all types and ratings of valves by unbolting, cutting etc. as required, cleaning by flushing with water/air etc. asrequiredand transportation of the same to Owners storage point (within thecomplex battery limits) and stacking as per instructions of Engineer-in-Charge. 157 VALVES OTHER THAN CONTROL VALVES 158 NB0.500 INCHES 159 NB0.750 INCHES 160 NB1.000 INCHES 161 NB1.500 INCHES 162 NB2.000 INCHES 163 NB3.000 INCHES 164 NB4.000 INCHES 165 NB6.000 INCHES 166 NB8.000 INCHES 167 NB 10.000 INCHES 168 NB 12.000 INCHES 169 NB 24.000 INCHES 170 NB 42.000 INCHES 171 LOW FRICTION PADS: Supply, fabrication and fixing of low friction pads with suitable bonding materials / fasteners, as specified in Drawings / Isometrics / Special support sketches. 172 TEFLON PAD WITH COMPRESSIVE STRENGTH (0.25 OFFSET) :1870 PSI 173 GRAPHITE PAD WITH COMPRESSIVE STRENGTH : 2877 PSI 174 PRE-COMMISSIONING / COMMISSIONING ASSISTANCE : Carrying out Pre-commissioning / Commissioning activities such as dropping the valves, control valves and spool pieces, air and water flushing and air-blasting, steam blowing, air drying, re-installing the valves, control valves and spool pieces, leak testing etc. as per pre-commissioning / commissioning specification/ procedure and instruction of Engineer-in-charge including supply of necessary hand tools, equipments/ machinery, consumables (electrodes, filler wire, gas, card board, target plate, scaffolding etc. wherever required) and with single point responsibility of Contractors supervision.Note : This manpower will be utilized forPre-commissioning & Commissioning requirement over and above that already described elsewhere in this SOR.One Man day is 12 hour duty. 175 SKILLED (WITH HAND TOOLS, EQUIPMENT/MACHINERY, CONSUMABLES) 176 SEMI SKILLED (WITH HAND TOOLS) 177 HELPER/ UNSKILLED 178 PIPE DAVITS :Supply, fabrication & erection of pipe davits as per EIL std. 7-12-023 for lowering of aircooler motors/safety valves from structural platforms, fixing the same to platforms, inspection as per specs., supply of all necessary materials, equipment, consumables, labour,supervision etc. The work shall be carried out as per the specifications, drawings & instruction of engineerincharge. 179 SOR Sl. No.: 179 || PART NO: 0 || SOR NO: B861-000-16-43-PK-SOR-3001-0-0M ||ITEM NO: M25201000000 180 SUPPLY OF BULK PIPING ITEMS :- Procurement andsupply of following bulk piping items to site/ownersstorage, transportation to work site/fabrication shop.Procurement shall be done as per EIL specifications andfrom Client/EIL approved suppliers.Contractor shall establish quantities from drawingsconsidering wastage, cutting allowance, escalation &spares required by Client 181 PIPES 182 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 0.5 INCH, S160 183 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 0.75 INCH, S160 184 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 1.0 INCH, XS 185 PIPE, B-36.10, ASTM A 106 GR.B, PE, SEAMLESS, 1.5 INCH, XS 186 PIPE, B-36.19, ASTM A 312 TP304, PE, SEAMLESS, 0.5 INCH, 80S 187 PIPE, B-36.19, ASTM A 312 TP304, PE, SEAMLESS, 0.75 INCH, 80S 188 PIPE, B-36.19, ASTM A 312 TP304L, PE, SEAMLESS, 0.75 INCH, 80S 189 FLANGES 190 FLNG.SW, B-16.5, ASTM A 105, 300, RF/125AARH, 1.0 INCH, XS 191 FLNG.SW, B-16.5, ASTM A 105, 300, RF/125AARH, 1.5 INCH, XS 192 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 0.75 INCH, S160 193 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 1.0 INCH, XS 194 FLNG.WN, B-16.5, ASTM A 105, 150, RF/125AARH, 1.5 INCH, XS 195 FLNG.WN, B-16.5, ASTM A 182 GR.F304, 150, RF/125AARH, 0.75 INCH, 80S 196 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 0.75 INCH 197 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 1.0 INCH 198 FLNG.BLIND, B-16.5, ASTM A 105, 150, RF/125AARH, 1.5 INCH 199 FLNG.BLIND, B-16.5, ASTM A 105, 300, RF/125AARH, 1.0 INCH 200 FLNG.BLIND, B-16.5, ASTM A 182 GR.F304, 150, RF/125AARH, 0.75 INCH 201 FITTINGS 202 ELBOW.90, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 203 ELBOW.90, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 204 ELBOW.90, B-16.11, ASTM A 105, SW, 6000, 0.75 INCH 205 ELBOW.90, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 206 T.EQUAL, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 207 T.EQUAL, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 208 T.RED, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH, 0.75 INCH 209 SWAGE.CONC, BS-3799, ASTM A 105, PBE, 0.75 INCH, S160, 0.5 INCH, S160 210 CPLNG.FULL, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 211 CPLNG.FULL, B-16.11, ASTM A 182 GR.F304L, SW, 3000, 0.75 INCH 212 CPLNG.HALF, B-16.11, ASTM A 105, SW, 3000, 1.0 INCH 213 CPLNG.HALF, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 214 CPLNG.HALF, B-16.11, ASTM A 105, SW, 6000, 0.75 INCH 215 CPLNG.HALF, B-16.11, ASTM A 182 GR.F304, SW, 3000, 0.75 INCH 216 CPLNG.LH, B-16.11, ASTM A 105, SW, 3000, 1.5 INCH 217 VALVES 218 VLV.GATE, SHEET 51001, 0.5 INCH 219 VLV.GATE, SHEET 51001, 0.75 INCH 220 VLV.GATE, SHEET 51001, 1.0 INCH, LOCK OPEN 221 VLV.GATE, SHEET 51001, 1.0 INCH 222 VLV.GATE, SHEET 51001, 1.5 INCH, LOCK OPEN 223 VLV.GATE, SHEET 51001, 1.5 INCH 224 VLV.GATE, SHEET 51007, 0.75 INCH 225 VLV.GATE, SHEET 51045, 0.5 INCH 226 VLV.GATE, SHEET 51045, 0.75 INCH 227 VLV.GLOBE, SHEET 52001, 1.0 INCH 228 VLV.GLOBE, SHEET 52007, 1.0 INCH 229 VLV.CHECK, SHEET 53001, 1.0 INCH 230 VLV.CHECK, SHEET 53007, 1.0 INCH 231 VLV.CHECK, SHEET 53050, 0.75 INCH 232 GASKETS 233 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 0.75 INCH 234 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 1.0 INCH 235 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 150, 1.5 INCH 236 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 300, 1.0 INCH 237 GASKET, B-16.20-ANSI B16.5, SP.WND SS316+GRAFIL+ I RING, SPIRAL, 300, 1.5 INCH 238 FASTENERS 239 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.5 INCH X 2.5 INCH 240 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.5 INCH X 2.75 INCH 241 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.0 INCH 242 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.25 INCH 243 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.5 INCH 244 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 3.75 INCH 245 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.625 INCH X 4.0 INCH 246 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 3.5 INCH 247 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 4.0 INCH 248 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7, A194 GR.2H, 0.75 INCH X 4.25 INCH 249 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7(HDG), A194 GR.2H(HDG), 0.5 INCH X 2.5 INCH 250 BOLT.STUD WITH 2 NUTS, B-18.2, A193 GR.B7(HDG), A194 GR.2H(HDG), 0.625 INCH X 3.25 INCH 251 CLOSE PROXIMITY RADIOGRAPHY:-Performance of radiographic inspection on piping of all types & thicknesses includingproviding or hiring of all necessary equipment and whatever else even though notexpressly mentioned but required to perform the work as per specification andinstructions of Engineer-in-Charge by using SELENIUM& IRIDIUM source basedradiography system. Radiography shall be submitted tothe Engineer-in-charge.(Repeat Radiography due todefective radiograph on reparired joints due toContractors fault and for additional radiographynecessitated due to poor performance of contractorswelders shall be done at contractors cost).Note: Unit for radiography quantity is Nos ofcircumferencial weld joints, and rates are also inclusive of scaffoldings wherverrequired. 252 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF JOB NDE SPECIFICATION) 253 NB0.750 INCHES 254 NB1.000 INCHES 255 NB1.500 INCHES 256 NB2.000 INCHES 257 NB3.000 INCHES 258 NB4.000 INCHES 259 NB6.000 INCHES 260 FOR JOINTS THK. <= 8MM (FOR CS AS PER CLASS lV OF JOB NDE SPECIFICATION/AS/SS) 261 NB2.000 INCHES 262 FOR JOINTS ABOVE THK. 8MM 263 NB8.000 INCHES 264 NB 12.000 INCHES 265 NB 18.000 INCHES 266 NB 24.000 INCHES 267 Supply,fabrication and fixing of low friction pad (SS 304 mirror finish) with suitablebonding material/ fasteners as specified in drawing/documents/special supportsketches/isometrics/Gads etc. 268 STAINLESS STEEL 6 MM THK WITH MIRROR FINISH SS304 269 External Chemical Cleaning and Passivation of SSWelds:External chemical cleaning and pickling of SS welds as per latest approved pipingdrawings and as per Job Specification B861-000-06-42-CCS-011. Work shall includesupply of all chemicals, temporary facilities with all accessories for conducting test,safety accessories and also providing or hiring all necessary equipment and whateverelse even though not expressly mentioned herein and in specifications but required toperform the work as per specifications and instructions of Engineer-in-Charge.(Unit ofmeasurement- No. of Joints) 270 NB0.500 INCHES 271 NB0.750 INCHES 272 NB1.000 INCHES 273 NB1.500 INCHES 274 NB2.000 INCHES 275 PAINTING (OFFSITES) :- Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per EIL painting spec., drawings and direction of Engineer-in-Charge for all types of uninsulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. For insulated piping wherever blast cleaning with no primer application is specified, in such cases finish paints shall also be applied inthe fabrication yard.The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabricationas well as erection joints) shall be left unpainted till hydrotesting. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines. 276 SURFACE PREP, PRIMER & FINISH COAT FOR CS, AS & LTCS BARE SURFACES FORENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 277 DESIGN TEMP GROUP: -16 TO 80(DEG C)SURFACE PREPARATION:SSPC-SP-10;1coat of F-9 @ 65-75µ DFT/coat, PRIMER: 1 coat of P-6 @ 40µ DFT/coat, FINISH COAT: 2 coats of F-6B @ 100µ DFT/coat + 1 coat of F-2 @ 40µ DFT/coat (2x100 + 40= 240). Total DFT = 345-355. 278 PIPES 279 NB: .5Inches 280 NB: .75 Inches 281 NB: 1 Inches 282 NB: 1.5 Inches 283 NB: 2 Inches 284 NB: 3 Inches 285 NB: 4 Inches 286 NB: 6 Inches 287 NB: 8 Inches 288 NB: 12Inches 289 VALVES 290 NB: .5Inches 291 NB: .75 Inches 292 NB: 1 Inches 293 NB: 1.5 Inches 294 NB: 2 Inches 295 NB: 3 Inches 296 NB: 4 Inches 297 NB: 6 Inches 298 NB: 8 Inches 299 NB: 12Inches 300 SURFACE PREP, PRIMER &FINISH COAT FOR CS & LTCS INSULATED SURFACES FOR ALLENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 301 DESIGN TEMP GROUP: -45 TO 125(DEG C)SURFACE PREPARATION: SSPC-SP-10;1 coat of F-15 @ 75µ DFT/coat, PRIMER: None, FINISH COAT: 2 coats of F-15 @ 75µ DFT/coat. Total DFT = 225 302 PIPES 303 NB: .5Inches 304 NB: .75 Inches 305 NB: 1 Inches 306 NB: 1.5 Inches 307 NB: 2 Inches 308 NB: 3 Inches 309 NB: 4 Inches 310 NB: 6 Inches 311 NB: 8 Inches 312 NB: 12Inches 313 NB: 18Inches 314 NB: 24Inches 315 NB: 28Inches 316 NB: 36Inches 317 NB: 42Inches 318 VALVES 319 NB: .5Inches 320 NB: .75 Inches 321 NB: 1 Inches 322 NB: 1.5 Inches 323 NB: 2 Inches 324 NB: 3 Inches 325 NB: 4 Inches 326 NB: 6 Inches 327 NB: 8 Inches 328 NB: 12Inches 329 NB: 18Inches 330 NB: 24Inches 331 NB: 42Inches 332 SURFACE PREP, PRIMER & FINISH COAT FOR CS, AS & LTCS BARE SURFACES FOR ENVIRONMENT AS PER JOB SPEC B861-000-06-42-PLS-01 333 DESIGN TEMP GROUP: -45 TO -15(DEG C)SURFACE PREPARATION:SSPC-SP-10; 1 coat of F-9 @ 65-75µ DFT/ coat. Total DFT = 65-75. 334 PIPES 335 NB0.50 INCHES 336 NB0.750 INCHES 337 NB1.000 INCHES 338 NB1.500 INCHES 339 NB2.000 INCHES 340 NB3.000 INCHES 341 NB4.000 INCHES 342 NB6.000 INCHES 343 NB12.000 INCHES 344 VALVES 345 NB0.50 INCHES 346 NB0.750 INCHES 347 NB1.000 INCHES 348 NB1.500 INCHES 349 NB2.000 INCHES 350 NB3.000 INCHES 351 NB4.000 INCHES 352 NB6.000 INCHES 353 NB12.000 INCHES 354 *************************************************************** LEGENDS / NOTES FOR INSULATION WORKS***************************************************************** Types of Insulation :CC =Cold Conservation Insulation SC =Surface Condensation InsulationH = Heat Conservation InsulationCPP =Cold Personal protectionHPP = Hot Personnel Protection Insulation** Basic Line Surface Materials:CS = Carbon Steel (Including LT Carbon Steel)AS = Alloy SteelSS = Stainless Steel ** Notes : 1. For Insulation specification, refer Job specification for Insulation of Piping and Equipment, B861-000-06-43-IL-S001*************************************************************** 355 COLD INSULATION (OFFSITES) Providing thermal insulation including supply of all insulating andancillary materials, Aluminium foil for SS surfaces, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required , including transportation of materials to work site, duly inspected by 3rd party inspector(Llyods/BV/DNV or any other Client approved party) at manufacturers shop & sample check/inspection at site by EIL Construction inspector,applying insulation on surfaces as specified including all preparatory works there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with cladding as per spec., providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. Providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions ofEngineer-in-charge. (Refer Legend for applicable EIL specification) 356 INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 357 INSULATION TYPE : CC; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C); INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 358 PIPES 359 NB 00.75 INCHES; THICKNESS25 MM 360 NB 01.00INCHES; THICKNESS25 MM 361 NB 01.50 INCHES; THICKNESS50 MM 362 NB 02.00 INCHES; THICKNESS50 MM 363 NB 06.00INCHES; THICKNESS50 MM 364 NB 08.00INCHES; THICKNESS50 MM 365 NB 012.000INCHES; THICKNESS60 MM 366 NB 018.000INCHES; THICKNESS60 MM 367 NB 24.00 INCHES; THICKNESS60 MM 368 NB 28.00 INCHES; THICKNESS60 MM 369 NB 42.00 INCHES; THICKNESS60 MM 370 FLANGE ASSEMBLIES 371 NB 00.75INCHES; THICKNESS25 MM 372 NB 01.00INCHES; THICKNESS25 MM 373 NB 01.50 INCHES; THICKNESS50 MM 374 NB 02.00INCHES; THICKNESS50 MM 375 NB 06.00INCHES; THICKNESS50 MM 376 NB 08.00INCHES; THICKNESS50 MM 377 NB 012.000INCHES; THICKNESS60 MM 378 NB 018.000INCHES; THICKNESS60 MM 379 NB 24.00 INCHES; THICKNESS60 MM 380 NB 42.00 INCHES; THICKNESS60 MM 381 BLIND FLANGE ASSEMBLIES 382 NB 00.75 INCHES; THICKNESS25 MM 383 NB 08.00 INCHES; THICKNESS50 MM 384 VALVE ASSEMBLIES 385 NB 00.75 INCHES; THICKNESS25 MM 386 NB 01.00INCHES; THICKNESS25 MM 387 NB 01.50INCHES; THICKNESS50 MM 388 NB 02.00 INCHES; THICKNESS50 MM 389 NB 06.00INCHES; THICKNESS50 MM 390 NB 08.00 INCHES; THICKNESS50 MM 391 NB 012.000INCHES; THICKNESS60 MM 392 NB 018.000INCHES; THICKNESS60 MM 393 NB 24.00 INCHES; THICKNESS60 MM 394 NB 42.00 INCHES; THICKNESS60 MM 395 INSULATION TYPE : SC; SURFACE MATERIAL : CS & AS; OPERATING TEMP. RANGE : UPTO -45 (DEG C); INSULATION MATERIAL : PREFORMED POLYISOCYANURATE RIGID FOAM(PIR) 396 PIPES 397 NB 00.50 INCHES; THICKNESS25 MM 398 NB 00.75 INCHES; THICKNESS25 MM 399 NB 01.00 INCHES; THICKNESS25 MM 400 NB 01.50 INCHES; THICKNESS25 MM 401 NB 02.00 INCHES; THICKNESS25 MM 402 NB 03.00 INCHES; THICKNESS25 MM 403 NB 04.00 INCHES; THICKNESS40 MM 404 NB 06.00 INCHES; THICKNESS25 MM 405 NB 06.00 INCHES; THICKNESS40 MM 406 NB 08.00 INCHES; THICKNESS25 MM 407 NB 08.00 INCHES; THICKNESS40 MM 408 NB 12.00 INCHES; THICKNESS40 MM 409 NB 18.00 INCHES; THICKNESS40 MM 410 NB 24.00 INCHES; THICKNESS40 MM 411 NB 24.00 INCHES; THICKNESS50 MM 412 NB 28.00 INCHES; THICKNESS50 MM 413 NB 42.00 INCHES; THICKNESS50 MM 414 FLANGE ASSEMBLIES 415 NB 00.50INCHES; THICKNESS25 MM 416 NB 00.75INCHES; THICKNESS25 MM 417 NB 01.00INCHES; THICKNESS25 MM 418 NB 01.50 INCHES; THICKNESS25 MM 419 NB 02.00 INCHES; THICKNESS25 MM 420 NB 03.00INCHES; THICKNESS25 MM 421 NB 04.00INCHES; THICKNESS40 MM 422 NB 06.00 INCHES; THICKNESS25 MM 423 NB 06.00 INCHES; THICKNESS40 MM 424 NB 08.00INCHES; THICKNESS25 MM 425 NB 08.00INCHES; THICKNESS40 MM 426 NB 12.00 INCHES; THICKNESS40 MM 427 NB 018.000INCHES; THICKNESS40 MM 428 NB 24.00 INCHES; THICKNESS40 MM 429 NB 24.00 INCHES; THICKNESS50 MM 430 NB 42.00 INCHES; THICKNESS50 MM 431 BLIND FLANGE ASSEMBLIES 432 NB 00.75 INCHES; THICKNESS25 MM 433 NB 01.00 INCHES; THICKNESS25 MM 434 NB 01.50 INCHES; THICKNESS25 MM 435 NB 02.00 INCHES; THICKNESS25 MM 436 NB 08.00 INCHES; THICKNESS40 MM 437 NB 24.00 INCHES; THICKNESS50 MM 438 VALVE ASSEMBLIES 439 NB 00.50 INCHES; THICKNESS25 MM 440 NB 00.75 INCHES; THICKNESS25 MM 441 NB 01.00 INCHES; THICKNESS25 MM 442 NB 01.50 INCHES; THICKNESS25 MM 443 NB 02.00 INCHES; THICKNESS25 MM 444 NB 03.00 INCHES; THICKNESS25 MM 445 NB 04.00 INCHES; THICKNESS40 MM 446 NB 06.00INCHES; THICKNESS25 MM 447 NB 06.00INCHES; THICKNESS40 MM 448 NB 08.00 INCHES; THICKNESS25 MM 449 NB 08.00 INCHES; THICKNESS40 MM 450 NB 12.00 INCHES; THICKNESS40 MM 451 NB 018.000INCHES; THICKNESS40 MM 452 NB 24.00 INCHES; THICKNESS40 MM 453 NB 24.00 INCHES; THICKNESS50 MM 454 NB 42.00 INCHES; THICKNESS50 MM 455 ELECTRICAL WORKS 456 Design, detailed engineering, preparation of documents, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, preparation of graphics for the total microprocessor based analogue addressable type fire detection & alarm system including supply of required software, packing, delivery of the following, including supply of all commissioning spares & special tools and tackles, erection material & documentation as per the enclosed EIL standard specifications, scope of work/job specification, data sheets etc. and other codes and standards attached or referred. 457 8-loop microprocessor based DGFAP with HMI with battery &charger (refer block diagram) 458 Microprocessor based Repeater panel with battery and charger (refer block diagram) 459 Multi - sensor type addressable detectors with junction boxes for safe area 460 Intrinsically safeHeat Detector-addressable type 461 Addressable Linear Beam detectors with transmitter, receiver, reflector for safe area. 462 Zener barrier 463 Outdoor weather proof addressable Break Glass Unit (BGU)/Manual call point (IP-65)in safe area. 464 Indoor addressable Break Glass Unit (BGU) in safe area. 465 Addressable type electronic hooter with minimum 6W output 466 Wall mounting type one faced exit signs suitable for indoor location 467 Ceiling mounting type double faced exit signs suitable for indoor location 468 Weather proof (IP-65) Fault Isolating Modules for loops connecting outdoor break glass units 469 Fault Isolating Modules for loops connecting indoor break glass units/detectors/hooters etc. 470 Control modules with integral junction box installed within loop 471 Input Module with integral junction box installed within loop 472 Industrial type 5 km diametrical range siren with Siren control & starter panel 473 Response indicator for rooms and concealed area for Addressable Fire alarm system 474 Hooter acknowledge Box 475 Providing training for TWO Nos. OWNERs Engineers for a period of 4 days at manufacturer works for Fire Alarm system 476 Providing training for FIVE Nos. OWNERs Engineers at site for the complete fire alarm system 477 Mandatory spares for Fire Alarm system as perCl.6.1 (Mandatory spares), sr.no.15 of EDB document no. B861-000-16-50-EDB-1001 478 Supply, inspection at shop, delivery at site of safe area weatherproof/ indoor push button type desktop/ wallmounting type Analogue caller ID telephone handsets (corded landline phones) with numeric key pad and redialling facility complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-ChargeExisting exchange distribution boxes make is ADC Krone, UK 479 Supply, inspection at shop, delivery at site of safe area weatherproof/ indoor push button type desktop/ wall mounting type Analogue non caller ID telephone handsets complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge.Existing exchange distribution boxes make is ADC Krone, UK 480 Installation, testing and commissioning of safe area weatherproof/ indoor push button type desktop/ wall mounting type telephone handsets complete with all accessories including all labour and materail. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 481 Design, detailed engineering, manufacture, preparation of documents, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, supply & delivery of plant communication system supply of all commissioning spares and special tools & tackles, erection & installation material & documentation as per the enclosed EIL specifications, Job specifications/scope of work, datasheets etc and other codes & standards attached or referred. 482 Desktop type Master Call Station (Central Control Unit withMain Master Control Controller with Gooseneck MIC and All Call & Inter-MCD Call facility) with 24 keys suitable for connection with existing 16 Way Microprocessor based Central Control Exchange of DD Electronic Equipment’s PVT Ltd make.Make & model no. of Desktop type Master call station shall be same/ similar make as that of existing.Existing make is DD Electronic Equipment’s PVT Ltd with Model No: LDD8950/20 483 480W BOOSTER AMPLIFIER UNIT including all accessories such as zonal relay cards, IOs, interconnection cables etc. suitable for integration with existing exchange of make DD equipments. Make & Model no. of Booster amplifier unit shall be same/similar make as that of existing.Existing make is BOSCH with Model No: LBD 1938 484 Weather proof IP-65 loud speaker 15/20 Watt suitable for integration with existing exchange of make DD equipments. Make & Model no. of Booster amplifier unit shall be same/similar make as that of existing. Existing make & model no. is Make – DNH ; Model - HS15T 485 Supply, installation and connection of CU earth plates ( 380x45x10) size, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in- Charge. 486 Unit Rates for UPS ACDB feeders/components 487 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU upto 32 A with Isolation Transformer 488 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 63 A with Isolation Transformer 489 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 100 A with Isolation Transformer 490 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU upto 32 A without Isolation Transformer 491 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 63 A without Isolation Transformer 492 Supply, mounting & wiring of fully equipped outgoing feeder 230V SFU 100 A without Isolation Transformer 493 supply& connection of 300A, 230V ACDB Vertical Empty Panel along with bus bar 494 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 16 A with 230/240V step up transformer) 495 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 32 A with 230/240V step up transformer) 496 Supply, mounting & wiring of Fully equipped outgoing feeder (230V SFU 63 A with 230/240V step up transformer) 497 Supply, mounting & wiring of 100A switch 498 Supply, mounting & wiring of 63A switch 499 Supply, mounting & wiring of 32A switch 500 Supply, mounting & wiring of 100A semiconducting fuse 501 Supply, mounting & wiring of 63A semiconducting fuse 502 Supply, mounting & wiring of 32A semiconducting fuse 503 Supply, mounting & wiring of 100A HRC fuse 504 Supply, mounting & wiring of 63A HRC fuse 505 Supply, mounting & wiring of 32A HRC fuse 506 Supply, mounting & wiring of 6 kVA 230V/230V Isolating Transformer 507 Supply, mounting & wiring of 5 kVA 230V/230V Isolating Transformer 508 Supply, mounting & wiring of 4 kVA 230V/230V Isolating Transformer 509 Supply, mounting & wiring of 3 kVA 230V/230V Isolating Transformer 510 Supply, mounting & wiring of 2 kVA 230V/230V Isolating Transformer 511 Supply, mounting & wiring of 1 kVA 230V/230V Isolating Transformer 512 Unit rates for 110V DCDB feeders/components 513 supply& connection of 350A, 110V DCDB Vertical Empty Panel along with bus bar 514 Supply, mounting & wiring of 63A, 110V DC SFU fully equipped outgoing feeder 515 Supply, mounting & wiring of 32A, 110V DC SFU fully equipped outgoing feeder 516 Supply, mounting & wiring of 16A, 110V DC SFU fully equipped outgoing feeder 517 Supply, mounting & wiring of 32A, 110V DC SFC (switch fuse+ contactor) fully equipped outgoing feeder 518 Supply, mounting & wiring of 16A, 110V DC SFC (switch fuse+ contactor) fully equipped outgoing feeder 519 Supply, mounting & wiring of 100A, 110V DC Switch 520 Supply, mounting & wiring of 63A, 110V DC Switch 521 Supply, mounting & wiring of 32A, 110V DC Switch 522 Supply, mounting & wiring of 16A, 110V DC Switch 523 Supply, mounting & wiring of 100A, 110V DC fuse Link 524 Supply, mounting & wiring of 63A, 110V DC fuse Link 525 Supply, mounting & wiring of 32A, 110V DC fuse Link 526 Supply, mounting & wiring of 16A, 110V DC fuse Link 527 Supply, mounting & wiring of 100A, 110V DC contactor 528 Supply, mounting & wiring of 63A, 110V DC contactor 529 Supply, mounting & wiring of 32A, 110V DC contactor 530 Supply, mounting & wiring of 16A, 110V DC contactor 531 TRANSFORMERS 532 Installation of transformers of the following ratings excluding the construction of foundation, includingtransportation from store/yard to site at the place of installation, unpacking, positioning in place, site assembly of loosely furnished accessories, including connection of auxiliary circuits, topping up with oil and testing of oil with contractors own test equipment, including fixing of nuts and bolts etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 533 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV2.5 MV·A 534 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV1.6 MV·A 535 2 Winding ONAN/ONAF outdoor transformer with OLTC. 11 kV/ 6.9 kV6.3 MV·A 536 Filtration of transformer oil by stream line filter machine provided by the contractor for improving the insulation strength of oil to the required strength,including all labour and materials,specifications of this tender and directions of Engineer-in-Charge.(Excluding the supply of oil). 537 Filtration of transformer oil with dissolved gas analysis test. 538 Filtration of transformer oil without dissolved gas analysis test. 539 Supply of transformer oil conforming to IS-335 in non-returnable 220 litre drums for topping up various transformers. The oil shall be tested prior to filling up and improved by filtering, if required, including all labour and materials,specifications of this tender and directions of Engineer-in-Charge. 540 No. of Drums. 541 Supply of dry type transformers with accessories,including nuts and bolts etc., as per EIL standard specification No. 6-51-0042, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 542 2 Winding Dry type transformers. .415 kV/ .415 kV75 kV·A 543 2 Winding Dry type transformers. .415 kV/ .415 kV160 kV·A 544 Installation, testing and commissioning of dry transformer of following rating, including transportation from store/yard to site at the place of installation, unpacking, positioning in place, site assembly of loosely furnished accessories, connection of auxiliary circuits,including fixing of nuts and bolts etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 545 2 Winding Dry type transformers. .415 kV/ .415 kV75 kV·A 546 2 Winding Dry type transformers. .415 kV/ .415 kV160 kV·A 547 Testing and commissioning of transformers of the following rating including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge. 548 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV2.5 MV·A 549 2 Winding ONAN outdoor transformer with off circuit tap changer. 11 kV/ .433 kV1.6 MV·A 550 2 Winding ONAN/ONAF outdoor transformer with OLTC. 11 kV/ 6.9 kV6.3 MV·A 551 SWITCHBOARDS / UPS / VSD / BATTERY CHARGERS / PANELS 552 Installation, testing and commissioning of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc. electrical panels etc., including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 553 Weight of the Unit upto 100 kg. 554 Weight of the Unit from 101 upto 500 kg. 555 Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc. electrical panels etc., including transportation from store/yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor etc., interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineers-in-Charge. 556 Weight of the Unit upto 100 kg. 557 Weight of the Unit from 101 upto 500 kg. 558 Installation, testing and commissioning of bus ducts of following ratings between transformer secondary and the switchgear incomer panel, including transportation from store/yard to site at the place of installation, unpacking, making connections and installation of bends, breaking of walls and making good of the same etc., (but excluding structural supports), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 559 Air Insulated/segregated bus ducts 415 V4000 A65 kAfor 1 second 560 Air Insulated/segregated bus ducts 415 V2500 A65 kAfor 1 second 561 Installation, testing and commissioning of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc .electrical panels etc., including transportation from store/yard to site at the place of installation, lifting the panels by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 562 Weight of the Unit upto 100 kg 563 Weight of the Unit from 101 upto 500 kg. 564 Weight of the Unit from 501 upto 1000 kg. 565 Weight of the Unit from 1001 upto 1500 kg. 566 Weight of the Unit from 1501 upto 3000 kg. 567 Installation of switch-boards, relay and control panels, annunciation panels, UPS system, battery chargers, distribution boards, cubicles with electrical equipment, VSD panels, misc .electrical panels etc., including transportation from store/yard to site at the place of installation, lifting the panels by deployment of tyre mounted hydraulic trollies, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite inter-panel wiring between shipping sections, including supply of all wiring materials, installation on foundations or fixing to wall or steel structures, aligning, levelling, grouting, testing and calibration of relays and meters etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 568 Weight of the Unit upto 100 kg 569 Weight of the Unit from 101 upto 500 kg. 570 Weight of the Unit from 501 upto 1000 kg. 571 Weight of the Unit from 1001 upto 1500 kg. 572 Weight of the Unit from 1501 upto 3000 kg. 573 Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery to site including all labour and materials along with supply of special tools & tackles for following Single Phase, 50 Hz UPS System along with associated accessories and AC Distribution Board complete with documentations as per approved drawings, specifications, data sheets and other codes & standards attached or referred with this tender and directions of Engineer-in-charge. 574 55KVA, 230V, 50 Hz, SPNParallel Redundant UPS withBypass as data sheet DS-440 575 1X100% NI-CD Battery Bank for 30 Min. backup along with all accessories & battery Isolator. 576 230V, 300 Amps, 50 Hz, AC Distribution Board as per Feeder Details listed in scope of work/job specification 577 Cell booster of adequate rating suitable for battery AH capacity. 578 Providing training to 2 nos. owners engineer at Vendor Works for a period of min. 3 days for 55KVA UPS system 579 Providing training to 5 nos. owners engineers at site for 55KVA UPS system 580 Mandatory spares for 230V, 55KVA UPS system as perCl.6.1 (Mandatory spares), sr.no.10 of EDB document no. B861-000-16-50-EDB-1001 581 MISCELLANEOUS CONTROL GEAR 582 Installation, testing and commissioning of miscellaneous surface mounted industrial/FLP control gear such as lighting/power panel, push button stations, motor starter, communication equipment, junction boxes, panels, plugs, sockets, including supply of necessary hardware, touch up painting including supply of paint, including transportation from store/yard to site at the place of installation, unpacking, (excluding fixing of cable glands and cable terminations),including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 583 Weight of the unit above 5 kg. but upto 20 kg. 584 Weight of the unit above 20 kg. but upto 100 kg. 585 Weight of the unit up to 5 kg. 586 Supply of Industrial, weather proof type Push Button stations as per EIL specification No. 6-51-0014, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 587 With stop (latching type) push button. 588 With stop (non-latching type) push button. 589 With start and stop (latching type) push buttons. 590 With start, stop push buttons and ammeter. 591 With start,stop push buttons and one Three position selector switch. 592 With start,stop push buttons, one Three position selector switch and ammeter. 593 With stop push button (Break Glass Type). 594 With start and stop (non-latching type) push buttons. 595 Supply of flameproof and weather proof type Push Button station as per EIL standard specification No. 6-51-0006 as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 596 With start, stop push buttons and one Three position selector switch and ammeter. 597 DC SYSTEM / BATTERY BANK 598 Supply of following ratings of Nickel-cadmium batteries, battery charger, distribution board alongwith accessories as per EIL specification No. 6-51-0019, 6-51-0047, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 599 160A (Min.) , dual redundant battery charger as per data sheet DS-430 600 110V, 1x500AH(Min.), Ni-Cd battery bank 601 110V, 350A DC distribution board as per feeder details listed in scope of work/job specification 602 3P MCCB / DC Circuit Breaker Battery isolator in weatherproof enclosure(IP-55)of adequate rating. 603 Mandatory spares for 110V Battery & Battery charger as per Cl.6.1 (Mandatory spares), sr.no.11 of EDB document no. B861-000-16-50-EDB-1001 604 Installation, testing and commissioning of stationary nickel-cadmium battery banks of the following ratings, including transportation from store/yard to site at the place of installation, filling with electrolyte, charging and dischargng of cells, including capacity test etc., aligning, levelling, grouting, assembly of battery racks, fixing of inter-cell connectors etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 605 Nickel-cadmium battery banks (including capacity test) rated for 110 V500 Ah 606 Supply of following rating of cell boosters as per EIL specification No. 6-51-0019, including all labour and materials, as per data sheets, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 607 Cell booster rated for 12 V50 A 608 PLUGS, SOCKETS AND JUNCTION BOXES 609 Supply of weatherproof metal clad 415V, TPN, industrial type socket and plug with heavy duty interlocking switch, with adequately sized cable adaptor box for incoming and outgoing cable terminations, including supply of double compression brass nickel plated cable glands, tinned copper lugs,including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 610 63 A, 415 V, 5 pin sockets along with associated 5 pin plugs. 611 240 V, 15 A, 3 pin sockets. 612 240 V, 15 A, 3 pin sockets along with associated 3 pin plugs. 613 24 V, 5 A, 3 pin sockets along with associated 3 pin plugs. WITH TRANSFORMER.(240/24V) 614 Supply, installation, cable termination, connection, testing and commissioning of following types of FLP andWP junction boxes, as per EIL specification No. 6-51-0061, including all labours and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 615 WP JB (IP-65) with 15 A, 16 terminals suitable for 1 No. incoming and6 Nos. outgoing cable entries complete with cable glands for incoming and outgoing cables and 3 Nos. blocking plugs 616 WP 3 way JB (IP-65) complete with 3 Nos. cable glands and 1 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable. 617 WP 4 way JB with IP-65 degree of protection complete with 4 Nos. cable glands and 2 Nos. blocking plug suitable for cables upto 3 x 2.5 sq. mm YWY / XWY cable. 618 NEUTRAL GROUNDING RESISTOR 619 Supply of following rating of outdoor type neutral grounding resistor, as per EIL standard specification no.6-51-0043,including all labour and materials, as per approved drawings, specifications of this tnder and directions of Engineer-in-Charge. 620 NGR rated for 3.81 kV400 A 621 Installation, testing and commissioning of outdoor type following neutral grounding resistor consisting of cast iron/stainless steel grid resistor with/without neutral CT including connection of one end of resistor with transformer neutral and the other end of the resistor to the earthing grid, including transportation from store/yard to site at the place of installation, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 622 NGR rated for 3.81 kV400 A 623 CAPACITOR BANKS 624 Supply of following HV capacitor banks, series reactor and RVT, as per EIL standard specification NO. 6-51-0020, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 625 11kV, 3 Phase,indoor type APFC panel -1500kVAR 626 Mandatory spares for APFC as per Cl.6.1 (Mandatory spares), sr.no.20 of EDB document no. B861-000-16-50-EDB-1001 627 Installation of following H.V. capacitor banks,series reactor and RVT, including transportation from store/yard to site ofinstallation, unpacking, assembly of elevating structure, interconnection of loose parts supplied by equipment vendor, aligning, levelling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 628 HV capacitor banks rated for 1500 kVAR11 kV 629 Testing and commissioning of following H.V. capacitor banks,series reactor and RVT, including testing equipments, all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 630 HV capacitor banks rated for 1500 kVAR11 kV 631 CANOPIES 632 Supply, fabrication and installation of FRP canopies for outdoor electrical miscellaneous equipments such as lighting/power panels and distribution junction boxes, local panels , PB stations etc. to render them weather proof including supply of necessary hardware for fixing and clamping with the equipment, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 633 Lighting Panel/Power panel/distribution junctions boxes. 634 Manual call points/field call stations. 635 Push button stations. 636 Supply, fabrication andinstallation of canopies for miscellaneous outdoor equipment like motors, fire alarm points, telephones, communication hand set stations etc. to render them weatherproof made out of 1.6 mm (16 gauge) sheet steel including supply of hardware and paint, painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 637 Supply, fabrication andinstallation of GI canopies for outdoor electrical motors of following frame sizes to render them weather proof including supply of necessary hardware for fixing and clamping with the motor foundation, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 638 Frame size upto 80. 639 Frame size more than 80 and upto 112. 640 Frame size more than 112 and upto 180. 641 Frame size more than 180 and upto 250. 642 Supply, fabrication and installation of GI canopies for outdoor electrical miscellaneous equipments such as lighting/power panels and distribution junction boxes, local panels , PB stations etc. to render them weather proof including supply of necessary hardware for fixing and clamping with the equipment, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 643 Lighting Panel/Power panel/distribution junctions boxes. 644 Manual call points/field call stations. 645 Push button stations. 646 FLP receptacles. 647 ANCHOR FASTENERS 648 Supply, drilling in RCC and fixing of metallic anchor fasteners for supporting of cable trays and miscellaneous electrical switchgear of following sizes, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 649 3/16 BSW. 650 5/16 BSW. 651 1/4 BSW. 652 3/8 BSW. 653 5/8 BSW. 654 1/2 BSW. 655 SAFETY EQUIPMENT 656 Supply and installation of the following, including the supply of necessary clamps, bolts, rawl plugs etc., breaking and making good of walls, if required, mounting, including all labour and materials, complete and as per applicable standards and CEA Guidelines and as per directions of Engineer-in-Charge. 657 Shock hazard charts complete with frame and glass. 658 First Aid Boxes. 659 4.5 kg capacity CO2 type fire extinguishers. 660 6.8 kg capacity CO2 type fire extinguishers. 661 9 kg capacity CO2 type fire extinguishers. 662 Sand buckets with stand (Each with at least 3 sand buckets). 663 Shock hazard charts - Laminated type 664 Gas Mask for use in substation during fire & smoke as per CEA guidelines 665 Supply and laying of 900 mm wide safety insulation mats complying to IS-15652, of following grades required for maintenance of electrical equipment in substation, including cutting to required shape in running length, including all labour and materials, as per applicable Indian or International standards and CEA Guidelines and as per directions of Engineer-in-Charge. 666 3.3 kV grade. 667 11 kV grade. 668 Supply of following items as per applicable Indian standards/CEA Guidelines. 669 Rubber hand gloves (11 kV grade). 670 Rubber hand gloves (33 kV grade). 671 Enamelled caution boards. 672 Discharge rod with earthing facility (upto 11 kV grade). 673 HV fuse puller handle. 674 Supply and application/installation of epoxy based insulation coating with breakdown voltage as per IS, suitable for system voltage as marked and shall be suitable for installation on concrete flooring of substation in airconditioned/non-airconditioned area, having smooth finish, including all labour and materials, complete as per approved drawings, job & standard specification attached with this tender and directions of the engineer-in- charge 675 For highest systen voltage of 12.1kV 676 SUPPLY OF SPARES / LAMPS 677 MV HRC Fuses 678 16 A. 679 32 A. 680 63 A. 681 100 A. 682 160 A. 683 250 A. 684 SUPPLY OF MV CABLES 685 Supply of 1100 V grade, Copper Conductor,XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 686 2 C x 10 sq. mm 687 2C x 16 sq. mm 688 2 C x 2.5 sq. mm 689 3 C x 6 sq. mm 690 2 C x 4 sq. mm 691 3 C x 4 sq. mm 692 3 C x 10 sq. mm 693 3 C x 2.5 sq. mm 694 Supply of 1100 V grade, Aluminium Conductor, XLPE insulated and armoured, cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 695 3 C x 25 sq. mm 696 3.5 C x 25 sq. mm 697 3 C x 35 sq. mm 698 2 C x 50 sq. mm 699 3 C x 95 sq. mm 700 3 C x 120 sq. mm 701 3.5 C x 185 sq. mm 702 3 C x 240 sq. mm 703 3 C x 50 sq. mm 704 3.5 C x 35 sq. mm 705 3.5 C x 95 sq. mm 706 3.5 C x 300 sq. mm 707 3.5 C x 50 sq. mm 708 3.5 C x 120 sq. mm 709 Supply of 1100 V grade, Copper Conductor, Individual pair shielded & Overall shielded, twisted pair/triad, XLPE insulated, Armored, FRLS outer-sheathed cables of following sizes as per EIL standard specification No. 6-51-0052, data sheets, specifications of this tender and directions of Engineer-in-Charge. 710 1 Pair x 2.5 sq. mm 711 2 Pair x 2.5 sq. mm 712 4 Pair x 2.5 sq. mm 713 6 Pair x 2.5 sq. mm 714 12 Pair x 2.5 sq. mm 715 SUPPLY OF HV CABLES (MULTI CORE) 716 Supply of 6.6 kV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 717 3 C x 240sq. mm, Al 718 Supply of 11 kV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured cables of following sizes as per EIL standardspecification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 719 3 C x 240 sq. mm, Al 720 3 C x 300 sq. mm, Al 721 SUPPLY OF HV CABLES (SINGLE CORE) 722 Supply of 6.6 KV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured single core cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 723 1 C x 630 sq. mm, Al 724 Supply of 11 KV (UE) grade, Al/Cu Conductor, XLPE insulated and armoured single core cables of following sizes as per EIL standard specification No. 6-51-0051, data sheets, specifications of this tender and directions of Engineer-in-Charge. 725 1 C x 630 sq. mm, Al 726 LAYING OF CABLES 727 Laying of cables of different voltage grade and types of the following overall diameters in ready trays/trenches/ supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 728 Cables with OD above 80 mm but upto 100 mm. 729 Cables with OD above 50 mm but upto 60 mm. 730 Cables with OD above 60 mm but upto 80 mm. 731 Cables with OD above 30 mm but upto 40 mm. 732 Cables with OD above 20 mm but upto 30 mm. 733 Cables with OD upto 20 mm. 734 Cables with OD above 40 mm but upto 50 mm. 735 Laying of cables (using cable pulling by motorized winch with torque limits) of different voltage grade and types of the following overall diameters in ready trays/trenches/supported on structure/pull through pipes including supply and fixing of stainless steel strip number tags, supply and fixing of GI saddles & saddle bars, trefoil clamps (for single core cables) etc., including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 736 Cables with OD upto 20 mm. 737 Cables with OD above 20 mm but upto 30 mm. 738 Cables with OD above 30 mm but upto 40 mm. 739 Cables with OD above 40 mm but upto 50 mm. 740 Cables with OD above 50 mm but upto 60 mm. 741 Cables with OD above 60 mm but upto 80 mm. 742 Cables with OD above 80 mm but upto 100 mm. 743 END TERMINATIONS 744 Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per IEC-60331, specifications of this tender and directions of Engineer-in- Charge. (Actual area of surface painted shall be measured). 745 Supply of Unearthed grade H.V. termination kits of (indoor/outdoor type) as per EIL standard specification No. 6-51-0051, excluding cable glands and lugs, as per approved drawings and as per specifications of this tender and directions of Engineer-in-Charge. 746 3 Core cable Indoor termination kit for 6.6 kV240 mm² 747 3 Core cable Outdoor termination kit for 6.6 kV240 mm² 748 3 Core cable Indoor termination kit for 6.6 kV300 mm² 749 3 Core cable Indoor termination kit for 11 kV300 mm² 750 3 Core cable Indoor termination kit for 11 kV240 mm² 751 1 Core cable Indoor termination kit for 6.6 kV630 mm² 752 1 Core cable Indoor termination kit for 11 kV630 mm² 753 Termination of Unearthed grade HV cables and connection of leads including fixing of cable glands,supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug onto the conductor, restoration of the insulation, clamping of cable cores and earthing of armour, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excluding supply of termination kits and cable glands). 754 3 Core cable termination kit for 6.6 kV300 mm² 755 3 Core cable termination kit for 6.6 kV240 mm² 756 3 Core cable termination kit for 11 kV300 mm² 757 3 Core cable termination kit for 11 kV240 mm² 758 1 Core cable termination kit for 6.6 kV630 mm² 759 1 Core cable termination kit for 11 kV630 mm² 760 Termination of XLPE insulated armoured power cables (up to 1100 V grade) and connection of leads excluding the supply of cable glands and lugs but includingfixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations, cutting and stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable-cores, marking with wire number, ferrules etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 761 Cables with OD above 60 mm but upto 80 mm. 762 Cables with OD above 40 mm but upto 50 mm. 763 Cables with OD above 30 mm but upto 40 mm. 764 Cables with OD above 50 mm but upto 60 mm. 765 Cables with OD upto 20 mm. 766 Cables with OD above 20 mm but upto 30 mm. 767 Termination of communication, fire alarm & control paired cables and connection of leads excluding the supply of cable glands and lugs but including fixing of cable glands, supply and fixing of PVC shrouds for outdoor terminations,cutting, stripping of cable insulation, crimping the lug on to the conductor, clamping of the cable- cores, marking with wire number, ferrules etc., including all labour and materials,as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 768 All sizes from 1P to 4P and upto 2.5 sq. mm 769 All sizes from 5P to 10P and upto 2.5 sq. mm 770 All sizes from 11P to 15P and upto 2.5 sq. mm 771 STRAIGHT THROUGH JOINTS 772 Supply and Making of heat shrinkable type straight through joints for 1100 volt grade power cablesas per EIL standard specification No. 6-51-0051, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 773 Cables with OD above 30 mm but upto 40 mm. 774 Cables with OD above 50 mm but upto 60 mm. 775 Cables with OD above 60 mm but upto 80 mm. 776 Cables with OD upto 20 mm. 777 Cables with OD above 40 mm but upto 50 mm. 778 Cables with OD above 20 mm but upto 30 mm. 779 Supply of heat shrinkable type Straight through jointing kits for Unearthed grade H.V. cables of the following sizes,as per EIL standard specification No. 6-51-0051, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 780 3 Core cable Straight through jointing kits for 6.6 kV240 mm² 781 3 Core cable Straight through jointing kits for 11 kV300 mm² 782 1 Core cable Straight through jointing kits for 6.6 kV630 mm² 783 1 Core cable Straight through jointing kits for 11 kV630 mm² 784 Making of Straight through joints for H.V. cables of following sizes excluding supply of jointing kit and accessories, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 785 3 Core cable Straight through jointing kits for 6.6 kV240 mm² 786 3 Core cable Straight through jointing kits for 11 kV300 mm² 787 1 Core cable Straight through jointing kits for 6.6 kV630 mm² 788 1 Core cable Straight through jointing kits for 11 kV630 mm² 789 Supply and Making of heat shrinkable type straight through joints for communication, fire alarm & control paired cables, including cutting, stripping of cable insulation complete with supply of compression / crimping type ferrules, plastic mould and epoxy resin compound etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 790 All sizes from 5P to 10P and upto 2.5 sq. mm 791 All sizes from 11P to 15P and upto 2.5 sq. mm 792 All sizes from 1P to 4P and upto 2.5 sq. mm 793 G.I. & PVC PIPES 794 Supply and laying of following sizes ofG.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs, bushings etc., small civil works, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 795 100 mm NB. 796 150 mm NB. 797 50 mm NB. 798 STRUCTURAL STEEL 799 Supply, fabrication, galvanising andinstallation of base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, cable and cable tray supports out of rolled MS sections, pipes, plates etc. including welding, bolting, rivetting, supply of necessary anchor bolts and grouting etc., including breaking walls, floors etc. for structures as required including supply of all GI hardware materials, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Any item weighing up to 1 kg. or less shall neither be measured nor paid). 800 CABLE - TRAYS 801 Supply and installation of prefabricated hot dip galvanised steel cable trays, fabricated out of hot rolled sheet steel with rigid welded construction ladder type with a rung as per std. 7-51-0333, of approved make and cable tray fittings, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 802 Reducers 750 - 450 RHS. 803 Reducers 750 - 600 RHS. 804 Reducers 750 - 600 LHS. 805 Horizontal bends for 450 mm wide tray with 1000 mm bending radius. 806 Horizontal bends for 600 mm wide tray with 1000 mm bending radius. 807 Vertical outside bends for 450 mm wide tray with 1000 mm bending radius. 808 Vertical outside bends for 600 mm wide tray with 1000 mm bending radius. 809 Vertical inside bends for 600 mm wide tray with 1000 mm bending radius. 810 Tee Joints for 450 mm wide tray with 1000 mm bending radius. 811 Tee Joints for 600 mm wide tray with 1000 mm bending radius. 812 Tee Joints for 750 mm wide tray with 1000 mm bending radius. 813 Cross Joints for 450 mm wide tray with 1000 mm bending radius. 814 Cross Joints for 750 mm wide tray with 1000 mm bending radius. 815 Vertical inside bends for 750 mm wide tray with 1000 mm bending radius. 816 300 mm wide Straight run cable tray. 817 Horizontal bends for 750 mm wide tray with 1000 mm bending radius. 818 Vertical outside bends for 750 mm wide tray with 1000 mm bending radius. 819 600 mm wide Straight run cable tray. 820 Reducers 750 - 300 RHS. 821 Reducers 600 - 300 RHS. 822 Horizontal bends for 300 mm wide tray with 1000 mm bending radius. 823 Vertical outside bends for 300 mm wide tray with 1000 mm bending radius 824 Vertical inside bends for 300 mm wide tray with 1000 mm bending radius 825 Tee Joints for 300 mm wide tray with 1000 mm bending radius. 826 450 mm wide Straight run cable tray. 827 750 mm wide Straight run cable tray. 828 Supply and installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 829 150 mm wide. 830 60 mm wide. 831 100 mm wide. 832 Supply, fabrication andinstallation of 0.91 mm (20 gauge) GI sheet covers for cable trays, including necessary hardwares, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 833 CABLE GLANDS 834 Supply of nickel-plated, flame proof IIA/IIB double compression type brass cable glands, suitable for out door terminations of armoured PVC cables of following overall diameter (excluding termination and connection of cables), including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 835 Cables with OD above 50 mm but upto 60 mm. 836 Cables with OD above 30 mm but upto 40 mm. 837 Cables with OD above 40 mm but upto 50 mm. 838 Cables with OD above 60 mm but upto 80 mm. 839 Cables with OD above 20 mm but upto 30 mm. 840 Cables with OD upto 20 mm. 841 Supply of nickel plated brass double compression cable glands suitable for outdoor installations (WP) of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 842 Cables with OD upto 20 mm. 843 Cables with OD above 20 mm but upto 30 mm. 844 Cables with OD above 30 mm but upto 40 mm. 845 Cables with OD above 40 mm but upto 50 mm. 846 Cables with OD above 50 mm but upto 60 mm. 847 Cables with OD above 60 mm but upto 80 mm. 848 Supply of nickel plated brass single compression cable glands of following overall diameter (excluding termination and connections of cables), including drilling of suitable holes in equipments for fixing purposes etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 849 Cables with OD upto 20 mm. 850 Cables with OD above 20 mm but upto 30 mm. 851 Cables with OD above 30 mm but upto 40 mm. 852 Cables with OD above 40 mm but upto 50 mm. 853 Cables with OD above 50 mm but upto 60 mm. 854 Cables with OD above 60 mm but upto 80 mm. 855 Cables with OD above 80 mm but upto 100 mm. 856 Supply and fixing of FLP(IIA/IIB) blocking plugs for blocking unused cable entries with following diameter in outdoor electrical equipment including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 857 Cables with OD above 60 mm but upto 80 mm 858 Cables with OD above 30 mm but upto 40 mm 859 Cables with OD above 40 mm but upto 50 mm 860 Cables with OD above 50 mm but upto 60 mm 861 Cables with OD up to 20 mm 862 Cables with OD above 20 mm but upto 30 mm 863 MARKERS 864 Supply and installation of earth pit markers for directly buried GI pipe electrodes as per std. 7-51-0101 with 14 SWG enamelled steel plate engraved with white letters BURIED, EARTH ELECTRODE on JADE green background complete with support and foundation, including all labour and materials, as per approved drawings, specifications of this tender and direction of Engineer-in-Charge. 865 Supply and installation of cable markers as per std. 7-51-0301, for underground cable runs with 14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 866 CABLE LUGS 867 Supply of crimping type long barrel tinned copper lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 868 All sizes from 50 to 185 sq. mm 869 All sizes from 16 to 35 sq. mm 870 All sizes from 240 to 400 sq. mm 871 All sizes upto 10 sq. mm 872 All sizes from 500 to 1000 sq. mm 873 Supply of crimping type long barrel aluminium lugs with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 874 All sizes upto 10 sq. mm 875 All sizes from 240 to 400 sq. mm 876 All sizes from 16 to 35 sq. mm 877 All sizes from 50 to 185 sq. mm 878 All sizes from 500 to 1000 sq. mm 879 Supply of crimping type long barrel Bimetallic lugs with Al barrel & tinned Cu palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 880 All sizes from 50 to 185 sq. mm 881 All sizes from 240 to 400 sq. mm 882 All sizes upto 10 sq. mm 883 All sizes from 16 to 35 sq. mm 884 All sizes from 500 to 1000 sq. mm 885 Supply of crimping type long barrel Bimetallic lugs with tinned Cu barrel & Al palm with circular/sector shaped barrel for following conductor sizes, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 886 All sizes upto 10 sq. mm 887 All sizes from 16 to 35 sq. mm 888 All sizes from 240 to 400 sq. mm 889 All sizes from 50 to 185 sq. mm 890 All sizes from 500 to 1000 sq. mm 891 FIRE PROOFING OF CABLES 892 Fire proofing of cables including supply of all fire proofing paint, including all labour and materials, as per specifications of this tender and directions of Engineer-in-Charge. (Actual area of surface painted shall be measured). 893 ADAPTORS / REDUCERS / NIPPLES ETC. 894 Supply and fixing nickel-plated brass adaptors/ reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 895 Eqpt. Thread 3/4 PF (J.I.S.)-E.T. Thread 3/4ET 896 Eqpt. Thread 1 PF (J.I.S.) - E.T. Thread 3/4ET 897 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 1ET 898 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/4ET 899 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/2ET 900 Eqpt. Thread 2 PF (J.I.S.) -E.T. Thread 1-1/2ET 901 Supply and installation of GI reducers/enlargers of following sizes for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 902 Eqpt. Thread PG 13.5(DIN) - E.T. Thread 3/4 ET 903 Eqpt. Thread PG 16 (DIN) -E.T. Thread 3/4 ET 904 Eqpt. Thread PG 21 (DIN) -E.T. Thread 1ET 905 Eqpt. Thread PG 29 (DIN) -E.T. Thread 1-1/2 ET 906 Eqpt. Thread 1 ET (IS) -E.T. Thread 3/4 ET 907 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1 ET 908 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1-1/2 ET 909 Eqpt. Thread 2 ET (IS) -E.T. Thread 1-1/2 ET 910 Supply and fixing FLP(IIA/IIB), weatherproof, nickel-plated brass adaptors/reducers for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 911 Eqpt. Thread 3/4 PF (J.I.S.)-E.T. Thread 3/4ET 912 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 3/4ET 913 Eqpt. Thread 1 PF (J.I.S.) -E.T. Thread 1ET 914 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/4ET 915 Eqpt. Thread 1-1/2 PF (J.I.S.)- E.T. Thread 1-1/2ET 916 Eqpt. Thread 2 PF (J.I.S.) -E.T. Thread 1-1/2ET 917 Supply and installation of FLP(IIA/IIB) GI reducers/ enlargers of following sizes for cable glands of following sizes including all labour and materials complete as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. Adaptors shall have male part threaded as per Eqpt. threads and the other end to receive glands having E.T. thread. 918 Eqpt. Thread PG 13.5(DIN) - E.T. Thread 3/4 ET 919 Eqpt. Thread PG 16 (DIN) -E.T. Thread 3/4 ET 920 Eqpt. Thread PG 21 (DIN) -E.T. Thread 1ET 921 Eqpt. Thread PG 29 (DIN) -E.T. Thread 1-1/2 ET 922 Eqpt. Thread 1 ET (IS) -E.T. Thread 3/4 ET 923 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1 ET 924 Eqpt. Thread 1-1/2 ET (IS) -E.T. Thread 1-1/2 ET 925 LIGHTING POLES 926 Supply and installation of Lighting Poles for floor mounting as per std. 7-51-0201, including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 927 Lighting poles including supply and connection of wires upto fixtures for safe areas. 928 Supply andinstallation of platform Lighting pole as per std. 7-51-0202,including all welding, structural works, paint and all sundry materials as required, including painting, (excluding supply and installation of control gear box/junction box), but including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 929 Lighting poles including supply and connection of wires upto fixtures for safe areas. 930 Supply andinstallation of street lighting poles (single bracket/double bracket) including built in marshalling box andnecessary wire/cable running from marshalling box to the lighting fixture, cable termination and connection, fixing of cable glands and lugs,including all civil works, excavation, foundation, disposal of surplus earth, providing shoring, strutting and dewatering if required and including supply of cement, steel, GI pipes, base plates, paint and all sundry materials as required, including painting, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 931 Poles as per std. 7-51-0233 with MB as per 7-51-0208 for safe area 932 Poles as per std. 7-51-0234 sht. 2 of 2 (Single bracket) 933 HAZARDOUS AREA LIGHTING FIXTURES AND ACCESSORIES 934 Installation, connection, testing and commissioning of following types of flame proof/Div.2 lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 935 3-way, junction box. 936 4-way, junction box. 937 Well glass type pole mounting type for Ground Level. 938 Well glass type ceiling mounted. 939 Well glass type bracket mounted. 940 Well glass type pole mounting type for Platform. 941 Supply and installation of Type-`A clamps(for bracket mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamp as per EIL std.no.7-51-0221, including supply and fixing of anchor fasteners, nuts and bolts, washers etc. as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 942 Supply and installation of adapters for Platform and ground pole mounted lighting fixtures as per EIL std.no.7-51-0221, approved drawings, specifications of this tender and directions of Engineer-in-Charge. 943 Supply and installation of Type-`B clamps(for ceiling mounted lighting fixtures) including bolt (MOC SS304) for fixing the fixture to the clamps per EIL std.no.7-51-0221, including supply and fixing of anchor fastners,nuts and bolts,washers as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 944 SAFE AREA LIGHTING FIXTURES 945 Supply, installation, testing and commissioning of following energy efficient lighting fixtures and connecting to wiring junction box/marshalling box complete with lamps and necessary control gear including supply of all connected materials like flexible conduit, clamps, supports, chains, anchor fastners, bolts, nuts and washers etc. as required, including supply and fixing of cable glands, lugs, including all labour and materials, as per approved drawings, data sheet for lighting fixture schedule, EIL installation standards, specifications of this tender and directions of Engineer-in-Charge. 946 Type LED SFD-12 Fixtures. 947 Type LED BK-3 Fixtures. 948 Type LED ST-10 Fixtures. 949 Type LED FD-1 Fixtures. 950 Type LED FD-2 Fixtures. 951 Type LED FD-3 Fixtures. 952 JUNCTION BOXES (OUTDOOR / INDOOR TYPE) 953 Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 954 3 way. 955 4 way. 956 LIGHTING / POWER PANELS AND DISTRIBUTION BOARDS 957 Supply, installation, connection, testing and commissioning offlame proof weather proof lighting/power panels(for gas group IIA/IIB) as per EIL std. spec. 6-51-0008, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 958 40 A, 4 pole incomer MCB isolator and 12 Nos. outgoingdouble poleMCBs with ELCB (upto 20 A). 959 40 A, 4 pole incomer MCB isolator and 6 Nos. outgoingdouble poleMCBs with ELCB (upto 20 A). 960 Supply, installation, connection, testing and commissioning of safe area lighting/power panels, surface/flush mounting type, wall mounting type in dust tight (with hinged cover) sheet steel enclosure having 4 pole incomer and single pole MCB (9 kA type) for outgoing circuit control with completewiring, including cable termination, connection and fixing of cable glands, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 961 40 A, 4 pole incomer MCB isolator and 6 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 962 40 A, 4 pole incomer MCB isolator and 12 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 963 63 A, 4 pole incomer MCB isolator and 18 Nos. outgoingdouble poleMCBs (upto 20 A) with RCCBs in each outgoing circuits suitable for outdoor location with IP-65 degree of protection 964 WIRING 965 Circuit wiring in non-hazardous areas using (size given below), copper conductor, PVC insulated, FRLS outer sleeve cables (third core for earthing),from lighting/powerpanel/distribution junction box, excluding the supply of cable, junction boxes and cable glands but including termination and connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 966 3 C x 2.5 sq. mm 967 3 C x 4 sq. mm 968 Circuit wiring in hazardous areas using (sizes given below) copper conductor, XLPE insulated, FRLS outer sleeve armoured cables (third core for earthing) from lighting/power panel/distribution junction box onwards, excluding the supply of cables, junction boxes and cable glands but including fixing of cable glands, supply and fixing of clamps, cable terminations and connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 969 3 C x 2.5 sq. mm 970 EARTH ELECTRODES 971 Supply, installation, testing and commissioning of GI earth electrodes, complete with earth pit as per std. 7-51-0102 and all necessary materials including excavation of earth pit, filling with charcoal and salt, back filling, providing necessary brickwork, connections, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 972 GI earth electrode as per std. 7-51-0102. 973 COPPER EARTH ELECTRODES 974 Supply, installation, testing and commissioning of Cu earth electrodes complete with 38 mm outer dia x 3 mm thick Cu pipe in a depth of 25Mtr, 3mm Thick 4Inch X 12 Inch Copper plate, earth pit and all necessary materials including excavation of earth pit, filling with charcoal and salt, bentonite powder, back filling, providing necessary brickwork, connections, including all labour and materials, as per sketch B861-000-16-50-DS-4001, approved drawings, specifications of this tender and directions of Engineer-in-Charge 975 EARTH STRIPS 976 Supply, installation and connection of following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 977 100 X 12 mm 978 40 x 5 mm 979 25 x 3 mm 980 50 x 6 mm 981 Supply, installation and connection of following GI earthing strip buried individually at a depth of 500 mm including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, excavation and refilling etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 982 100 X 12 mm 983 40 x 5 mm 984 25 x 3 mm 985 50 x 6 mm 986 EARTHING CONNECTION 987 Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire /G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 988 3/8 dia (10 mm) flexible rope. 989 5/8 dia (16 mm) flexible rope. 990 8 SWG GI Wire. 991 Supply and installation of 25 sq. mm (168/0.01772) copper flexibles of following length with copper lugs crimped on both sides for earthing of pipeline vessels, equipments (non electrical) as per std. 7- 51-0112, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 992 300 mm 993 500 mm 994 1500 mm 995 EARTH PLATES 996 Supply, installation and connection of GI earth plates as per std. 7-51-0103, complete with anchor bolts, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 997 GI earth plate as per std. 7-51-0103. 998 EARTHING CONNECTORS 999 Supply and installation of MS ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1000 Minimum 75mm to maximum 300 mm long 1001 Supply and installation of stainless steel ear of width 50 mm and thickness 5 mm for earthing of process vessels, steel structures, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1002 Minimum 75mm to maximum 300 mm long 1003 LIGHTNING RODS 1004 Supply and installation of GI lightning rod as per std. 7-51-0503 including supply of all hardware etc., including all labour and materials,as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1005 GI lightning rod as per std. 7-51-0503. 1006 LAYING OF COMMUNICATION / FIRE ALARM CABLES 1007 Horizontal and vertical laying/pulling through of communication/fire alarm cables of the following overall diameters in ready trays/trenches/conduits or supported on structures including supplying and fixing of GI saddle and saddle bars, stainless steel strip number tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1008 Cables of overall dia. above 35 mm. 1009 Cables of overall dia. upto 35 mm. 1010 Laying of HDPE ducts for laying of optical fiber cables between various substations, pulling through pipes or supported on structures including supplying and fixing of GI saddle and saddle bars, including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1011 HDPE duct with overall dia. Upto 60mm 1012 HDPE duct with overall dia. above 60mm 1013 Laying of optical fiber cables between various buildings in already laid HDPE conduits for plant communication and fire alarm data highway, feeder differential protection, etc., including supply of all hardware, splice connectors, accessories, pulling through pipes or supported on structures including supply and fixing of printed stainless steel/ non magnetic non corrosive metal tags, including transportation from store/yard to site at the place of installation, unpacking, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1014 Cables of overall dia. upto 40 mm. 1015 Cables of overall dia. above 40 mm. 1016 STRAIGHT THROUGH JOINTS COMMUNICATION / FIRE ALARM CABLES 1017 Making of straight through joints for polyethylene insulated armoured jelly filled/ non filled overall PVC jacketed, including supply of all necessary materials for the joint, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1018 For Non-Jelly filled cables of size .9 mm5 pair 1019 For Non-Jelly filled cables of size .9 mm20 pair 1020 For Non-Jelly filled cables of size .9 mm10 pair 1021 For Jelly filled cables of size .63 mm²20 pair 1022 For Non-Jelly filled cables of size 1.5 mm²2 pair 1023 Supply of straight through jointing kit for Mono mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1024 6 Fiber 1025 Supply of straight through jointing kit for Multi mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1026 6 Fiber 1027 Making of straight through jointing kit for Mono/Multi mode, multitube/unitube, jelly filled, Optical fiber cable with non metallic armour with following number of fibers, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1028 6 Fiber 1029 END TERMINATIONS FOR COMMUNICATION/FIRE ALARM CABLES. 1030 Termination of following polyethylene insulated armoured jelly filled/ non filled cables including cutting, stripping of cable insulation, sealing of jacket including supply of termination kit, hardware, including all labour and materials, as per approved drawings, specification of this tender and directions of Engineer-in-Charge. 1031 For Non-Jelly filled cables of size .9 mm5 pair 1032 For Non-Jelly filled cables of size .9 mm2 pair 1033 For Non-Jelly filled cables of size .9 mm50 pair 1034 For Non-Jelly filled cables of size .63 mm20 pair 1035 For Non-Jelly filled cables of size 1.5 mm2 pair 1036 For Non-Jelly filled cables of size 1.5 mm²2 pair 1037 Supply ,Installation, testing and commissioning of Fiber Optic Patch panel (LIU) for following type & number of fiber for OFCs including all accessories for terminating, pigtails with Connectors, patch cords with connectors, Splicing sleeves and splice tray including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge 1038 For 6 fiber Mono mode cable with LC pigtails and LC patch cords 1039 For 6 fiber Mono mode cable with SC pigtails and LC patch cords 1040 For 6 fiber Mono mode cable with ST pigtails and LC patch cords 1041 For 6 fiber Mono mode cable with LC pigtails and SC patch cords 1042 For 6 fiber Mono mode cable with LC pigtails and ST patch cords 1043 For 6 fiber Mono mode cable with SC pigtails and SC patch cords 1044 For 6 fiber Mono mode cable with SC pigtails and ST patch cords 1045 For 6 fiber Mono mode cable with ST pigtails and SC patch cords 1046 For 6 fiber Mono mode cable with ST pigtails and ST patch cords 1047 Termination of optical fiber cables for various systems including supply of all hardware, splice connectors, accessories, including all labour and materials as per approved drawings specifications of this tender and directions of engineer-in-Charge 1048 6 Fiber 1049 SUPPLY OF COMMUNICATION / FIRE ALALRM CABLE / CONDUITS / DUCTS 1050 Supply of communication, fire alarm & control paired cables of following sizes as per EIL standard specification No.6-51-0052, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1051 Jelly filled cables of size .9 mm20 pair 1052 Jelly filled cables of size .9 mm10 pair 1053 Non-Jelly filled cables of size .9 mm5 pair 1054 Non-Jelly filled cables of size .9 mm2 pair 1055 Non-Jelly filled cables of size 1.5 mm2 pair 1056 Non-Jelly filled cables of size .9 mm50 pair 1057 Non-Jelly filled cables of size .63 mm2 pair 1058 Supply of Mono mode, jelly filled, Optical fiber cable with non metallic armour with following number of cores & construction, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1059 6 Fiber multitube construction 1060 Supply of Multi mode, jelly filled, Optical fiber cable with non metallic armour with following number of cores & construction, as per EIL standard specifications, data sheet, specifications of this tender and directions of Engineer-in-Charge. 1061 6 Fiber multitube construction 1062 Supply of HDPE ducts for laying of optical fiber cables between various substations, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge 1063 HDPE duct with overall dia. Upto 60mm 1064 HDPE duct with overall dia. above 60mm 1065 CIVIL WORKS/M.S. CHEQUERED PLATE 1066 Making through and through cut outs in pockets of size 150 mm dia in the RCC floor/walls of trenches/buildings of thickness upto 200mm for facilitation cable entries using concrete cutting machines including all labour and materials as per approved drawings, specifications of this tender and directions of Engineer -in-charge 1067 Excavation and backfilling of trenches for cables and earth strip etc. , for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth up to a distance of 30 m, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Excavated trench dimensions shall be measured). 1068 Excavation and backfilling of trenches in all types of soil including rock. 1069 Excavation and backfilling of trenches in all types of soil except rock. 1070 Supply and laying of 40 mm size gravel in one layer of 100/150 mm thick including dressing of soil surface and laying the aggregate in uniform layer and density, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge ( Aggregate will be measured in boxes of size 1.5 m x 1.5 m x 0.5 m which shall be taken as 1 cubic metre, the boxes are to be furnished by the contractor free of cost for measuring purposes). 1071 40 mm size gravel. 1072 Supply and spreading of approved fine river sand/stone dust in cable trenches, including all labour and materials, specifications of this tender and directions of Engineer-in-Charge. 1073 Fine river sand. 1074 Supply and spreading of approved FLY ASH BRICKS - TYPE-5 of 75 mm thickness in cable trenches for cable protection, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. (Actual area of laid brick surfaces shall be measured). 1075 Bricks. 1076 Supply, fabrication and installation of 6 mm thick M.S. chequered plate for covering floor cut- outs/cable trenches etc., including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 1077 6 mm thick M.S. chequered plate. 1078 Making through and through cut outs in pockets of following shape and size in the RCC floor/ walls of trenches/ buildings of thickness above 200 mm and upto 400 mm for facilitating cable/ duct entries, using concrete cutting machines and making cut out good using plastering and painting including all material and labour as per approved drawings, specification of this tender and directions of Engineer-in-charge. 1079 Rectangular Cut Out of length 200 mmwidth 200 mm 1080 Circular Cut Out of diameter 150 mm 1081 LAN SYSTEMS 1082 Supply, installation, mounting, testing & commissioning of following Ethernet switches including performance warranty certification(for LAN) of 25 years through OEM, including all labour and materials, as per approved drawings, specifications of this tender and directions of Engineer-in-charge. 1083 Etherswitch Rack Type-I 1084 PAINTING & MARKING 1085 Letter painting and marking of all buses of switchboards, all incomers, bus couplers, outgoings with details of Tag No, feeder rating in KW/Amp, sending end source, in the front of the panels and bus bar, panel nos.etc. on the rear side of the panels for all switchboards, all other substation equipment viz.transformers, capacitors, neutral grounding resistors, VFD panels, other panels, etc for equipment housed in electrical substations including supply of all material such as stickers, enamel paints, stencil, etc including supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge. 1086 Each alphabet/character above 2 inch and Upto 4 inch in height/length 1087 Each alphabet/character upto 2 inch in height/length 1088 Each alphabet/character above 4 inch and Upto 8 inch in height/length 1089 Each alphabet/character above 8 inch and Upto 12 inch in height/length 1090 Letter painting of tag nos., applicable circuit nos. for identification with red/black/white paint for all outdoor equipment in safe and hazardous areas viz.light fittings, control gear boxes, lighting/power panels, welding receptacles, convenience receptacles, local control stations, fire alarm manual call points, fire alarm detectors, motors,field call stations, loud speakers, etc. including supply of enamel paint, all hardware as required,supply of all labour, materials as per the specification of this tender and directions of Engineer-in-Charge. 1091 Each alphabet/character above 2 inch and Upto 4 inch in height/length 1092 Each alphabet/character upto 2 inch in height/length 1093 Each alphabet/character above 4 inch and Upto 8 inch in height/length 1094 Each alphabet/character above 8 inch and Upto 12 inch in height/length 1095 INSTRUMENTATION 1096 PRESSURE GAUGES AND ACCESSORIES (Incl. supply of Impulse pipe/Tubing material) 1097 Installation of Line mounted or Remote mounted or Local Gauge Board mounted Pressure gauge/ Pressure gauge with Pulsation Dampener/ Syphon/ Overrange Protector (direct/ surface mounted/ diaphragm seal type) inclusive of mounting of instrument, supply of piping and tubing materials such as valves, fittings, pipes, tubes, compression fittings, as per specification, supply and erection of supports, mounting on support, (if support required), laying of capillary on supports, fabrication and installation of manifolds/ impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument, Gauge Board, Yoke, and Calibration. 1098 In Carbon Steel as per Standard 7-52-1103 1099 In Carbon Steel as per Standard 7-52-4079. 1100 DIFFERENTIAL PRESSURE GAUGES (Incl. supply of Impulse pipe/Tubing materials) 1101 Installation of Differential Pressure gauge with/ without pulsation dampner/Syphon/ overrange protector including one side capillary type)/ Diaphragm seal type Differential Pressure gauge, surface/ yoke mounted inclusive of mounting of instrument, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, supply and erection of supports, mounting on support, laying of capillary on supports, fabrication and installation of manifolds/ impulse lines with supports as per standards indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument and Calibration 1102 In Carbon Steel as per Standard 7-52-4077. 1103 In Carbon Steel as per Standard 7-52-4078. 1104 PRESS.INSTRUMENTS (Incl. supply of Impulse pipe/Tubing material) 1105 Installation of Pressure Transmitters/ Pressure Switches (with or without Pulsation Dampener, Overrange Protector)/ Diaphragm seal type Pressure Transmitters/ Diaphragm seal type Pressure Switches including mounting on Yoke/ Surface, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, supply of supports for capillary, supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instrument, all Electrical/ Pneumatic connections, Yoke and Calibration. 1106 In Carbon Steel as per Standard 7-52-1101 1107 In Carbon Steel as per Standard 7-52-1159 1108 In Carbon Steel as per Standard 7-52-1188 1109 In Carbon Steel as per Standard 7-52-1102 1110 In Carbon Steel as per Standard 7-52-1163 1111 In Stainless Steel as per Standard 7-52-1159 1112 DIFFERENTIAL PRESSURE INSTRUMENTS (Incl. supply of Impulse pipe/Tubing materials) 1113 Installation of Differential Pressure Transmitters (including one side capillary type)/ Differential Pressure Switch(including one side capillary type)/ Diaphragm seal type DP Transmitters/ Diaphragm seal type DP Switch including mounting on Yoke/ Surface, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings as per specifications enclosed, ,supply and erection of supports for impulse lines wherever required, fabrication and installation of manifolds/ impulse lines with supports as per Standard indicated below, supply and fabricating of supports for capillary, laying of capillary on supports, painting, installation of flushing connection, hydraulic testing of impulse lines as per standard indicated below but exclusive of Supply of Instrument, all Electrical/ Pneumatic connections, Yoke and Calibration. 1114 In Carbon Steel as per Standard 7-52-1140 1115 In Carbon Steel as per Standard 7-52-1192 1116 DIFFERENTIAL PRESSURE (FLOW) TRANSMITTERS (Incl. supply of Impulse pipe/Tubing material) 1117 Installation of Differential pressure(with or without integral manifold)/ Diaphragm Seal Type Differential Pressure flow instruments including Mounting on Yoke, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compressive fittings as per specifications enclosed,supply of supports for impulse lines/ manifolds/ capillary, fabrication and Installation of manifolds/ impulse lines with supports as per Standard indicated below, laying of capillary on supports, hydraulic testing and painting of supports but exclusive of Supply of Instruments, all Electrical/ Pneumatic connections, Yoke and Calibration. 1118 In Carbon Steel as per Standard 7-52-3489. 1119 In Carbon Steel as per Standard 7-52-3490. 1120 In Carbon Steel as per Standard 7-52-3491. 1121 In Stainless Steel as per Standard 7-52-3490. 1122 ULTRASONIC FLOWMETER 1123 Installation of Transmitters/ Preamplifiers for ultrasonic flowmeters on yoke/ instrument (if required) including Straight length spool piece with pressure and temperature compensation loop including laying and termination of interconnection cable supports for cables as required, painting of supports but exclusive of supply of instrument, yoke and calibration. 1124 Installation of Transmitters/ Preamplifiers for Ultrasonic Flowmeters 1125 DIFFERENTIAL PRESSURE (LEVEL) TRANSMITTERS (Incl. supply of Impulse pipe/Tubing material) 1126 Installation of DP type/ Diaphragm Seal DP type Level Instrument including mounting on Yoke, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compressive fittings, as per specifications enclosed, supply of supports for impulse line/ capillary/ manifold, fabrication of manifolds and erection wherever required, laying of capillary on supports, fabrication and installation of impulse lines with support as per Standard indicated below, hydraulic testing and painting of supports but exclusive of Supply of Instrument,all Electrical/ Pneumatic connections, Yoke and Calibration. 1127 In Carbon Steel as per Standard 7-52-1523. 1128 In Carbon Steel as per Standard 7-52-1524. 1129 LEVEL GAUGES (Incl. supply of Impulse pipe/Tubing material) 1130 Installation of Level Gauges on Vessel/ Piping/ Standpipes with minor modification wherever required, supply of piping & tubing materials such as valves, fittings, pipes, tubes, compression fittings, as per specifications enclosed, fabrication of primary piping, fabrication and installation of drain valve/ vent valve assembly as per Standard indicated below, hydraulic testing of gauge, installation of illuminators/ non-frosting extension if required but exclusive of Supply of Gauges and Illuminators. 1131 In Carbon Steel as per Standard 7-52-1527 1132 SERVO TYPE TANK GAUGES 1133 Installation/ interconnection of Servo type Gauges with/ without Tank Farm Management (TFM) System components. Installation of Gauge, Isolation ball valve, Calibration chamber on flanged equipment nozzle, with or without still well, Junction boxes with barriers, power switch, all Electrical connections but exclusive of Supply of Instrument, still well and Calibration/ Setting of gauges. 1134 Servo Gauge Installation 1135 RADAR LEVEL INSTRUMENTS 1136 Installation of radar sensor and antenna, flanged type connection on equipment nozzle/ rail mounting with/without still well, but exclusive of supply of instruments. Installation of electronics units (total system for indication, transmission, marshalling etc. for one tank), including mounting on Yoke, supply of angle tray with supports, fabrication and erection of supports and laying of cable up to instrument/probe with clamps, termination of cables at both ends, but exclusive of supply of Instruments, supply of yokes and Calibration. 1137 Installation of Top Mounted Radar 1138 Installation of tank side indicator/electronic unit (total system for indication/ transmission/marshalling etc., as required for one tank) including mounting on yoke/support, fabrication and erection of supports, laying and termination of interconnecting cable up to instrument/ indicator with clamps, termination of cables at both ends, painting of supports but exclusive of supply of instruments, yoke, cables and calibration. 1139 Tank Side Indicator 1140 TEMPERATURE INSTRUMENTS 1141 Installation of Temperature Indicators/ Gauges (Filled system/ Bimetallic) RTD/ Thermocouple/ Temperature Switches/ Temperature transmitters with flanged thermowell inclusive of installation of machined/ built-up thermowells on the nozzle and installation of Instruments, Electrical/ Pneumatic connection but exclusive of Supply of Instruments/ Elements/ Thermowell, and Calibration. 1142 Temperature Indicator/ Gauges (Bimetallic Type) with thermowell on flanged wells 1143 TEMPERATURE TRANSMITTERS (REMOTE MOUNTED) 1144 Thermocouple/ RTD element with thermowell, along with Temperature Transmitter remote mounted. Installation of transmitter including mounting on yoke, fabrication and erection of supports with clamps and laying of extension/RTD cable upto thermocouple, termination of cables at both ends, painting of supports but exclusive of Supply of Instruments, Cable, Yoke and Calibration. 1145 Temperature transmitter and RTD. 1146 Temperature Transmitter and RTD with flanged well 1147 Multipoint temperature transmitter with Thermocouple / RTD 1148 MISCELLANEOUS ITEMS AND DEVICES 1149 Mounting of Miscellaneous instrument items as listed below on Yoke; fabrication and erection of Supports and including installation of instrument items,paintingofsupportsbutexclusiveofSupplyofInstrumentitems, Piping/ Tubing material / Calibration and supply and erection of Yoke support. 1150 ER probe assembly with accessories like flange, valve etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1151 Corrosion coupon assembly with accessories like flange, valve etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1152 Weather proof Push Button Station/ Selector Switches. 1153 Corrosion Transmitters 1154 CALIBRATION/ TESTING 1155 Cleaning, adjusting stroke/ positioner, stroke speed checking of Control and On-off (Shutdown) valves. Providing equipments, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable and loop testing. Excludes flow calibration 1156 Control Valves 1157 Self Actuated Pressure reducing valves 1158 Cleaning, set pressure tests of Pressure Relief and Thermal Relief Valves. Providing equipment, necessary test jig, Instrument Air, Nitrogen Cylinders, test reports, all consumable. Excludes flow calibration. 1159 Sizes upto 3/4 x 1 threaded 1160 Inlet Sizes upto 2 flanged, rating 150# to 2500# 1161 Cleaning, calibration of the instrumentslisted below including removal of instrumentfromreinstalledlocationslikepanels,enclosures,racks,field etc.,andfixingthembackinrespectiveplaces,providingequipments, necessarytestjig,InstrumentAir,NitrogenCylinders,testreports,all consumable, exceptforspecialimportedtestequipments for electronic instruments to be supplied by owner if available. 1162 Pressure gauges 1163 Pressure transmitters 1164 Differential Pressure Gauges 1165 Differential Pressure Transmitters for Flow, Level and D.P. 1166 Temperature gauges 1167 Temperature Transmitters 1168 Tank Level Instrument (Radar type) 1169 Servo Type Tank Gauges 1170 Electronic Local Indicator 1171 Cleaning, checking and functional tests for flowmeters. Providing equipments, necessary test jig, Instrument Air, test reports, all consumable, except for special imported test equipments for electronic instruments to be supplied by owner if available. Excludes flow calibration. 1172 Ultrasonic flowmeters 1173 LOOP CHECKING 1174 Loop checking (excluding calibration/ testing) of the instruments listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060. 1175 Pressure transmitters 1176 Differential Pressure Transmitters for Flow, Level and D.P. 1177 Temperature Transmitters 1178 Special Level Instruments/ Guided Wave / Ecclipse type Radar level instruments 1179 Tank Level Instruments (Radar type) 1180 Electronic Local Indicator 1181 Speed / Vibration Transmitter 1182 Push Button/Selector Switches/Lamps 1183 Control valve positioner 1184 Corrosion Transmitter 1185 Loop checking (excluding calibration/ testing) of the flowmeters listed below including verifying the functional performance of all elements comprising the loop, thereby ensuring proper interconnections and operation, with all other specifications inline with clause 4.13 of Standard specification for Erection tender 6-52-0060. 1186 Ultrasonic flowmeters 1187 SUPPLY ITEMS 1188 Supply of Instrument items as per specifications enclosed elsewhere in the Tender. 1189 24 Orifice plate as per Instrument data sheet no. B861-700-YF-DS-0001. 1190 2/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0001. 1191 3/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0001/B861-851-YF-DS-0001. 1192 4/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-851-YF-DS-0001. 1193 Magnetic Level Gauge as per Instrument data sheet no. B861-701-YL-DS-2900. 1194 Breather valve as per Instrument data sheet no. B861-701-YB-DS-3200. 1195 Retractor Tool for ER probes system & Corrosion coupon system as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1196 Tubular ER Probe system (Tag No. 701-CP-1701) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-1701), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3001 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1197 Tubular ER Probe system (Tag No. 701-CP-1801) with ER probe assembly,corrosion transmitter (Tag No. 701-CT-1801), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3002 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1198 Tubular ER Probe system (Tag No. 701-CP-1901) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-1901), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3003 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1199 Tubular ER Probe system (Tag No. 701-CP-2001) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-2001), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3004 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1200 Tubular ER Probe system (Tag No. 701-CP-2101) with ER probe assembly, corrosion transmitter (Tag No. 701-CT-2101), 1 working and 1 spare ER probes for each ER probe locations as per data sheet no. B861-701-YI-DS- 3005 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1201 Corrosion coupon system (Tag No. 701-CC-1701) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3001 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1202 Corrosion coupon system(Tag No. 701-CC-1801) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon locationas per data sheet no. B861-701-YI-DS- 3002 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1203 Corrosion coupon system(Tag No. 701-CC-1901) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3003 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1204 Corrosion coupon system(Tag No. 701-CC-2001) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3004 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1205 Corrosion coupon system(Tag No. 701-CC-2101) with Corrosion Coupon Holder Assembly, 25 nos. of coupons for each corrosion coupon location as per data sheet no. B861-701-YI-DS- 3005 &as per Job specification for corrosion monitoring system document no.B861-000-06-42-CMS-0001. 1206 24 V DC loop powered spare corrosion Transmitter. 1207 Type: Non-contact type Radar Level Instrument (Tag No. 700-LT-1601)as per data sheet no.B861-700-YL-DS-2000 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART / 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1208 Type: Non-contact type Radar Level Instrument (Tag no. 700-LT-1602)as per data sheet no.B861-700-YL-DS-2001 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply,Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1209 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2201) as per data sheet no.B861-701-YL-DS-2000 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316 , Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1210 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2203) as per data sheet no.B861-701-YL-DS-2001 , Smart Transmitter with integral display, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1211 Type: Non-contact type Radar Level Instrument (Tag No. 701-LT-2204) as per data sheet no.B861-701-YL-DS-2002 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply.Gauge Head: 6 Flanged connection / Top mounted , Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1212 Type: Non-contact type Radar Level Instrument (Tag No. 851-LT-5501) as per data sheet no.B861-851-YL-DS-2000 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART / 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1213 Type: Non-contact type Radar Level Instrument (Tag No. 851-LT-5502) as per data sheet no.B861-851-YL-DS-2001 , Smart Transmitter with integral display & local indicator, Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply.Gauge Head: 8 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART /1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1214 Type: Servo Level Instrument (TagNo. 701-LT-2202) as per data sheet no.B861-701-YL-DS-2003 , Smart Transmitter with integral display , Power supply: 24 VDC Loop powered or separate 240V AC UPS Supply, Gauge Head: 6 Flanged connection / Top mounted, Flange Material: SS316, Accuracy: +/- 3mm, Output: 4-20 mA HART/ 1/2 cable entry connectionfor signal & 3/4 cable entry connection for power (if applicable). 1215 Signal cableXLPE insulatedFRLS 2 QUAD X1.5 mm2 as per data sheet no.B861-000-YS-DS-7006. 1216 2/300# Orifice plate & flange assembly as per Instrument data sheet no. B861-700-YF-DS-0002. 1217 Signal cableFR2 QUAD X1.5 mm2 as per data sheet no.B861-000-YS-DS-7009. 1218 Industrial grade 4 1/2 digit digital Multimeter including accessories like battery, connecting pin, carry bag. 1219 Industrial grade digital mA loop calibrator including accessories like battery, connecting pin, carry bag. 1220 Industrial grade Multifunction calibrator with low , high pressure pump including accessories like charger, connecting pin, carry bag. 1221 Universal hand-held HART communicators with accessories including charger, connecting pin, carry bag. 1222 Differential Pressure (Flow) Transmitter-HART as per data sheet no. B861-700-YI-DS-3150 & B861-851-YI-DS-3150. 1223 Differential Pressure (Flow) Transmitter-HART as per data sheet no. B861-700-YI-DS-3151. 1224 Differential Pressure Transmitter-HART as per data sheet no. B861-700-YI-DS-3200. 1225 Differential Pressure (Level) Transmitter-HART as per data sheet no. B861-701-YI-DS-3050. 1226 Pressure Transmitter-HART as per data sheet no. B861-700-YP-DS-3001,B861-700-YP-DS-3002, B861-700-YP-DS-3003 & B861-701-YP-DS-3001. 1227 Pressure Transmitter-HART as per data sheet no. B861-701-YP-DS-3002 & B861-851-YP-DS-3002. 1228 Pressure Transmitter-HART as per data sheet no. B861-701-YP-DS-3003 & B861-851-YP-DS-3001. 1229 Multipoint Temperature Elements - RTD with thermowell as per data sheet no. B861-701-YT-DS-4050. 1230 Temperature Elements - RTD with thermowell as per data sheet no. B861-700-YT-DS-4101, B861-701-YT-DS-4002, B861-851-YT-DS-4001. 1231 Temperature Transmitter-HART as per data sheet no. B861-700-YI-DS-3100, B861-701-YI-DS-3100, B861-701-YI-DS-3101, B861-701-YI-DS-3102 & B861-851-YI-DS-3100. 1232 Temperature Elements - RTD as per data sheet no. B861-701-YT-DS-4001. 1233 Signal cableFR 1PX1.5 mm2 as per data sheet no.B861-000-YS-DS-7008. 1234 Pressure Gauges as per data sheet no. B861-851-YP-DS-1100 & B861-700-YP-DS-1100, B861-701-YP-DS-1100. 1235 Temperature Gauges with thermowell as per data sheet no. B861-851-YT-DS-4100, B861-700-YT-DS-4105, B861-701-YT-DS-4100. 1236 Pressure Gauges as per data sheet no. B861-700-YP-DS-1101, B861-701-YP-DS-1101. 1237 Differential Pressure Gauges as per data sheet no. B861-700-YP-DS-1102, B861-701-YP-DS-1102. 1238 Temperature Gauges with thermowell as per data sheet no. B861-700-YT-DS-4104, B861-701-YT-DS-4101. 1239 Signal cableXLPE insulatedFRLS 12PX1.5 mm2 1240 Signal cableXLPE insulatedFRLS 1PX1.5 mm2 1241 Supply of Junction boxes of various types and specifications 1242 Junction Box, Weatherproof type for 12 Pair Cable 1243 Junction Box, Weatherproof type for 3 Way 1244 Supply of Cable glands ofvarioustypes and specifications 1245 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 1/2 NPTM 1246 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 1 1/2 NPTM 1247 Weatherproof double compression type Cable gland, SS 304 material with PVC shroud, 3/4 NPTM 1248 Supply of plugs for cable entries of varioustypes and specifications 1249 Plug ,weatherproof type, SS 304 material, 1/2 NPTM 1250 Plug ,weatherproof type, SS 304 material, 1 1/2 NPTM 1251 Plug ,weatherproof type, SS 304 material, 3/4 NPTM 1252 Supply of compression tube fittings in Stainless Steel of various types and specifications 1253 Male Connector: Material: SS-316 : Size: 1/2 NPTM X 1/2 OD 153 Bar 1254 Male Connector: Material: SS-316 : Size: 1/4 NPTM X 1/4 OD 153 Bar 1255 Male Connector: Material: SS-316 : Size: 1/2 NPTM X 1/4 OD 153 Bar 1256 SS 316 Ball Valve 1/2 TH 41 Bar. 1257 Tube Union: Material: SS-316 ; Size: 1/2 OD x 1/2 OD 153 Bar 1258 Tube Cap; Material: SS-316 ; Size : 1/2 OD 153 Bar 1259 6 Way Air Manifold SS316 1260 Supply of instrument tubes of different types and specifications 1261 SS316L tube 1/2 OD 153 Bar 1262 SS316L tube 1/4 OD 153 Bar 1263 Supply of pipe and pipe fittings 1264 SS316 Pipe 1 PL End, SCH. 40S 1265 10% of impulse piping / tubing material subject to minimum 1 number (1 meter for pipe / tube), whichever is higher, of each type, size, rating & material wise (such as valves, fittings, pipes, tubes, compression fittings as listed in the list of items of installation standard no. 7-52-3489, 7-52-3490, 7-52-3491, 7-52-1527, 7-52-1523, 7-52-1524, 7-52-4077, 7-52-4078, 7-52-1192, 7-52-1140, 7-52-1103, 7-52-4079 , 7-52-1101, 7-52-1102, 7-52-1159, 7-52-1188 & 7-52-1163) in the overall SOR quantity as per specification as a Mandatory spare. 1266 SS316 Nipple 1/2 TH x TH, SCH. 80S 1267 SS316 Nipple 1 TH x PL, SCH. 40S 1268 SS316 Nipple 1 PL x PL, SCH. 40S 1269 SS316 Equal Tee 1 SW, 3000# 1270 SS316 Elbow 1” SW, 3000# 1271 SS316 Cap 1/2” TH, 3000# 1272 SS316 Cap 1” TH, 3000# 1273 SS316 Coupling full 1” SW, 3000# 1274 SS316 Globe Valve 1 SW, body rating: 800#, end rating: 3000# 1275 JUNCTION BOX INSTALLATION 1276 Installation of weatherproof junction boxes including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG Copper wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings for cable size 12Px0.5/1.0/1.5/2.5 mm² Signal/Alarm/ Control. 1277 Installation of weatherproof three way junction boxes for Power including supply, fabrication and installation of supports, installation of junction boxes, supply of 14 SWG Copper wire (max. length 10 m per Junction Box), laying and connection, screwing plugs for unused entries and painting but exclusive of supply of junction boxes and glands/ fittings for cable size 2C x 2.5 mm² 1278 LAYING OF CABLES 1279 Laying of instrumentation cables for signal, alarm, shutdown, control and signal cable on ducts, main trays, perforated trays, angle trays, trenches (including opening of cable duct covers if requiredthrough IRCs {Instrument Road Crossings}) including clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire, providing and fixing identifying tags and megger testing but exclusive of supply of cables and erection of ducts, main tray, perforated tray/ angle trays and preparation of cable trench. 1280 Signal / Alarm / Control Cables of cable sizes 1P x 1.5 / 2.5 mm² 1281 Signal/ Alarm/ Control Cables of cable sizes 24C /12P x 1.5/ 2.5mm² 1282 Laying of power cables on ducts, main trays, perforated trays, angle trays, trenches (including through IRCs) including opening of cable duct covers if required clamping, glanding the cables, termination at both ends including shield/ drain/ communication wire providing and fixing of identifying tags and megger testing but exclusive of supply of multi cables and erection of ducts, main tray, perforated tray/ angle tray and preparation of cable trench 1283 For cable size 2C x 2.5 mm² 1284 EARTHING 1285 Supply, laying and termination of both ends of earthing cables from earth grid pit to the DCS/ Local panels/ Barrier earth bus bars in trays/ conduits/ trenches as required. 1286 At both ends of earth grid/ Instruments of copper wire (12 AWG) in trays and conduits as required excluding earth-pit preparation and electrode installation. 1287 PIPING / TUBING / FABRICATION WORK 1288 Fabrication and erection of SS Air lines and fittings including supply/ fabrication/ erection of supports, installation of distribution, pneumatic testing and painting of supports but exclusive of supply of pipe and fittings as per standard 1289 For size 1 1290 Laying of Bare/ PVC covered copper tubes/ SS tubes on perforated trays including clamping, termination at both ends, providing identifying tags at both ends and Air testing, but exclusive of supply of copper/SS tubes, fitting and erection of perforated tray/ angle tray 1291 1/2 / 12 mm O.D . (for SS tubes) 1292 Erection of SS Air distribution manifold and fittingsincludingsupply/ fabrication/ erection of supports, pneumatic testing andpaintingofsupportsbutexclusiveofsupplyofSSAir distribution manifold and fittings 1293 Installation of 6-way Air Manifold (1/2) as per Standard 7-52-1905 1294 Tubing Hook-up of Control valves/ Pneumatic Transmitters etc. with air filter regulator / positioner / solenoid valves / Current to Pneumatic converters etc. as per Standards 1295 as per standard 7-52-3982. 1296 RADIOGRAPHY - CARBON STEEL WELD JOINTS 1297 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Gauges 1298 In Carbon Steel as per Standard 7-52-1103. 1299 In Carbon Steel as per Standard 7-52-4079. 1300 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differrential Pressure Gauge 1301 In Carbon Steel as per standard 7-52-4077. 1302 In Carbon Steel as per standard 7-52-4078. 1303 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Instruments installations 1304 In Carbon Steel as per Standard 7-52-1101. 1305 In Carbon Steel as per Standard 7-52-1159. 1306 In Carbon Steel as per Standard 7-52-1188. 1307 In Carbon Steel as per Standard 7-52-1102. 1308 In Carbon Steel as per Standard 7-52-1163. 1309 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure Instruments 1310 In Carbon Steel as per Standard 7-52-1140. 1311 In Carbon Steel as per Standard 7-52-1192. 1312 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Flow) Instruments 1313 In Carbon Steel as per Standard 7-52-3489. 1314 In Carbon Steel as per Standard 7-52-3490. 1315 In Carbon Steel as per Standard 7-52-3491. 1316 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Level) Instruments 1317 In Carbon Steel as per Standard 7-52-1523. 1318 In Carbon Steel as per Standard7-52-1524. 1319 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Magnetic Level Gauges 1320 In Carbon Steel as per Standard 7-52-1527. 1321 RADIOGRAPHY - CS SPECIAL, ALLOY STEEL, SS 1322 Radiography conforming to the requirements of the Piping Class for all weld joints in Piping of Instrument air supply distribution, In Stainless Steel as per Standard 7-52-1905. 1323 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Pressure Instruments installations 1324 In Stainless Steel as per Standard 7-52-1159. 1325 Radiography conforming to the requirements of the Piping Class for all weld joints in impulse piping of Differential Pressure (Flow) Instruments 1326 In Stainless Steel as per Standard 7-52-3490. 1327 Fire protection of instrument cable duct/trays 1328 Supply and erection of fire protection material for instrument cable ducts as per specification enclosed elsewhere with tender 1329 Run of Duct 600mm(W) X 300mm(H) 1330 Supply and erection of fire protection of cable trays as per specification enclosed elsewhere with tender 1331 Run of Tray 100mm (W) X 30mm (H) 1332 Run of Tray 60 mm (W) X 20mm (H) 1333 Run of Tray 150 mm (W) X 75 mm (H) 1334 Run of Tray 300 mm (W) X 75 mm (H) 1335 STRUCTURAL 1336 Supply, Fabrication and erection of Galvanised Iron duct and its supports as per standard. Duct configurations include Duct Equal Tee, Duct Expander Tee, Duct Reducer Tee, Duct Offset Bend, Duct with Reducer, Vertical Plane Tee, Vertical Plane Elbow, Duct Bridge (jumpover), Sleeves. 1337 Run of Duct 1000mm (W) X 400mm (H) 1338 Run of Duct 600mm (W) X 300mm (H) 1339 Run of Duct 800mm (W) X 300mm (H) 1340 Supply and erection of prefabricated FRP perforated trays with covers as per specifications enclosed elsewhere in tenderdocument and its support including tees, bends and elbows 1341 tray of 60 mm (W) X 20 mm (H) 1342 tray of 150 mm (W) X 75 mm (H) 1343 tray of 300 mm (W) X 75 mm (H) 1344 tray of 100 mm (W) X 30 mm (H) 1345 CANOPY FOR INSTRUMENTS AND JUNCTION BOXES 1346 Supply of Prefabricated FRP canopies along with mounting accessories for local instruments, Transmitters, Junction Box etc. for mounting on the stanchion and alignment as per standard 7-52-0105 1347 FRP Canopy (All sides closed) - Field Instruments 1348 FRP Canopy (All Side Closed) - Temperature Transmitter and Loop Powered Indicator 1349 FRP Canopy For Junction Box - Front Side Open 1350 FRP Canopy (All Side Closed) - Guided Wave , Mass Flow Meter 1351 FRP Canopy for RTD / Thermocouple 1352 Erection of Prefabricated FRP canopies for local instruments, Transmitters, Junction Box etc. on the stanchion and alignmentas per standard 7-52-0105 1353 FRP Canopy (All sides closed) - Field Instruments 1354 FRP Canopy (All Side Closed) - Temperature Transmitter and Loop Powered Indicator 1355 FRP Canopy For Junction Box - Front Side Open 1356 FRP Canopy for RTD / Thermocouple 1357 FRP Canopy (All Side Closed) - Radar Level Instruments 1358 GENERAL SITE WORK 1359 Supply of Yoke supports for transmitters/ preamplifiers (wherever applicable) including supply, fabrication and erection of instrument yoke of all types and painting of yoke supports but exclusive of mounting of Instrument on supports. 1360 2 Yoke supports as per standard 7-52-0101 1361 Erection of 2 Yoke supports/ stanchions for Instruments but excluding supply and fabrication of Yoke support. 1362 Erection of2 Yoke supports for instruments excluding supply of Yoke 1363 Supply, fabrication and installation of structural supports with MS channel/angle/plates etc. for supports ofmiscellaneous instruments/cabinets/panels including cutting, welding , bolting, rivetting, groutingincluding supply and installation of installation hardware like anchor bolts/nuts etc., painting of supports including supply of paints as per specification, including all labours and materials and completion of jobs in all aspects as per drawings/directions of Engineer-in-Chargenor paid). 1364 Structural steel ISMC 100 1365 Identification of instrument items wherever required including supply of approved colour of paint/ paints (Fluorescent), painting of tag number (approx 25-50 mm high) on instrument item like transmitter, switches, level gauges, control valves etc. as specified by Engineer-in-Charge. 1366 Identification of instrument items 1367 Supply, Fabrication & Installation of Concrete Pedestal (RCC) for supporting JB/Yoke but exclusive of supply of JB/Yoke as per specifications/drawing attached 1368 Size 500 mm x 500 mm x 600 mm 1369 SITE ACTIVITIES BY MECHANICAL CONTRACTOR 1370 Supply & wrapping of single layer PIR Insulation (Cold conservation type insulation ) with thickness of 50mm for 1/2 impulse lineconsist of insulation blocks fixed with adhesives, joint sealants, protected from moisture/ water ingress by vapour barrier, vapour stop and covered with a weather protection jacket after cleaning the impulse lines of dust, rust, grease in line withJob specification for Insulation of piping & equipment ( B861-000-06-43-IL-S001 ) attached in the tender. The wrapping of the insulation around impulse line shall cover it completely without leaving any gap. Scope of supply & wrapping by Contractor includes all material, tools, tackles & labour etc. to complete the work in all respects. 1371 Supply & wrapping of single layer PIR Insulation (Surface condensation type insulation ) with thickness of 25mm for 1/2 impulse lineconsist of insulation blocks fixed with adhesives, joint sealants, protected from moisture/ water ingress by vapour barrier, vapour stop and covered with a weather protection jacket after cleaning the impulse lines of dust, rust, grease in line withJob specification for Insulation of piping & equipment ( B861-000-06-43-IL-S001 ) attached in the tender. The wrapping of the insulation around impulse line shall cover it completely without leaving any gap. Scope of supply & wrapping by Contractor includes all material, tools, tackles & labour etc. to complete the work in all respects. 1372 Transportation of all types of valves (Including Control Valves, Special Control Valves, Motor Operated Valves, PRDS, Control valves, On-Off/Shutdown valves, Self actuating valves) from Owners storage points to contractors stores/worksite and installation of valvesfor all rating including assembly of valves accessories like air bottles etc, if any, fixing of gaskets bolts/nuts wherever required and performing Positive Material Identification(PMI) using alloy analysers as per specification, drawings and directions of Engineer-in-Charge. 1373 Inlet Valve size - 12 , Rating - 300# 1374 Inlet Valve size - 1 , Rating - 300# 1375 Inlet Valve size - 1 1/2 , Rating - 300# 1376 Inlet Valve size - 3 , Rating - 300# 1377 Transportation of all types of Safety Valves, Pilot Operated Safety Valves from owners storage point to contractors store/worksite and installation of valves for all ratings including assembly of valves, accessories if any, at alllocations and fixing of gaskets, bolts/nuts wherever required as per drawings, specifications and as per the directions of engineer-in-charge. 1378 Inlet size - 1 , Rating - 150# 1379 Inlet size - 2 , Rating - 150# 1380 Inlet size - 4 , Rating - 150# 1381 Inlet size - 3/4 , Rating - NPT 1382 Impulse line painting (uninsulated) as per painting specification for project 1383 Instrumentation impulse line of size 1/2 for temp. (-)14 to 80 degC 1384 Impulse line painting (insulated) as per EIL painting specification for project. 1385 Impulse line size of 1/2 with material Carbon Steel for temp. (-)45 to 125 degC 1386 ENVIRONMENT 1387 Condensate Water Treatment Plant 1388 CONDENSATE WATER TREATMENT PLANT, WITH COMPLETE ACCESSORIES & AUXILLARIES (As per Document no. B861-000-17-42-SS-1001): The scope of work shall include design, engineering, procurement, fabrication, supply, transport, handling, storage at site, erection, civil, electrical, piping, painting, mechanical and instrumentation works, testing, pre-commissioning, commissioning, trial run and guarantee of condensate water treatment system and handing over of the same to the Owner. 1389 EQUIPMENT - PACKAGE 1390 Design, engineering, procurement of raw materials and bought out components, manufacture, assembly, inspection, testing, painting (both primer and finish coat) , erection, testing &commissioning of following Basket Strainers along with associated equipment/items complete in all respect for efficient & satisfactory operation as per enclosed Scope of Work (Doc no. B861-000-80-42-SOW-3001) & Process data sheets. 1391 BASKET STRAINERS, Tag Nos. 701-STR-1701/1702 1392 BASKET STRAINERS, Tag Nos. 701-STR-1801/1802 1393 BASKET STRAINERS, Tag Nos. 701-STR-1901/1902 1394 BASKET STRAINERS, Tag Nos. 701-STR-2001/2002 1395 BASKET STRAINERS, Tag Nos. 701-STR-2101/2102 1396 Supply and Installation of Wall mounted Split Air Conditioners for Store Officer cabin : Supply of single phase inverter controlled Split Air Conditioner with compatible stabilizer (copper winding) complete with all accessories and fittings, including supply of first fill of refrigerants (non-CFC and eco-friendly), remote control, transportation from vendors works to site, unloading at site, handling, transportation to contractors store and from contractors store to work site, storage at site, assembly at site, installation and other field works including civil-structural works complete in all respect, testing, painting, insulation, commissioning, handing over to client. Split unit shall have wall mounted indoor unit and outside located air cooled condenser (outdoor unit) with insulated refrigerant piping (considering approx 10 m length between indoor and outdoor unit), controls and accessories, electrical and civil works(e.g. civil work related to concealing of refrigerant piping, drain piping to the nearest drain, cabling (considering approx 10 m length between indoor and outdoor unit) of AC units) as required including the structural steel framework, pedestal/bracket to mount the indoor and outdoor units, supports & clamps for refrigerant piping/cables, stabilizer, hold down nuts & bolts, spares for commissioning and start up etc. as per the enclosed Job Specification and other documents referred therein and instruction of engineer-in-charge for each equipment including accessories. 1397 Inverter Type Split Air Conditioner of capacity 1.5 TR having star rating 5 (BEE 5 star rating or equivalent) 1398 EOT CRANE (SAFE AREA APPLICATION) FOR MATERIAL STORE/ WORKSHOP BUILDING :Radio Remote Control(1 Working+ 1 Stand by) Operated-Design, engineering, manufacture, procurement of raw materials and bought out components, supply, fabrication, assembly, shop painting (primer + finish coat), inspection, testing (at manufacturers shop), packing and supply of double girder type EOT Crane including supply of all commissioning spares, special tools and tackles as applicable, mandatory spares, first fill of lubricant, consumables,erection material & documentation, transportation from Vendors works to designated storage site, handling, loading, unloading and storage, complete site works including transportation from storage site to work site, storage & handling at work site, assembly at site, erection installation, testing, touch-up painting, pre commissioning, commissioning, performance guarantee test run including arrangement of test loads, completing thework in all respects and handling over to Client, as per drawing, specifications, scope of work and instructions of engineer in charge and other attachment included in Tender for following EOT Crane.NOTE 1: Span or/and travel length of crane may undergo minor changes of ±0.5 meter during detailed engineering, for which no price & time implication shall be entertained.NOTE 2: Height of lift may undergo minor changes by ±0.5 meter during detailed engineering, for which no price & time implication shall be entertained.NOTE-3: Contractor shall arrange/bring adequate certified test loads during testing at EOT crane location. To and Fro transportation of test loads with cage (including loading, handling, unloading etc.), including taking back of test load after successful performance test from worksite and supply of manpower shall be in scope of Contractor). 1399 1 No. Double Girder E.O.T Crane with Main hook SWL (Safe Working Load) 15 MT , Auxillary hook SWL 3 MT , Span -12.7 m, Long Travel - 30 m , Height of lift - 8 m, M5 duty along with rails, fixtures and other accessories.(Refer Scope of Work , Job Specification & Electrical specifications ) enclosed elsewhere with this tender document). 1400 UNIT RATES FOR E.O.T CRANE FOR ADDITION/DELETION PURPOSE 1401 Unit Rate (ADDITION / DELETION) for ±0.5m in HEIGHT OF LIFT (over & above 0.5 m from specified data) 1402 Unit Rate (ADDITION / DELETION) for ±0.5m in SPAN (over & above 0.5 m from specified data). 1403 Unit Rate (ADDITION / DELETION) for ±0.5m in LONG TRAVEL (over & above 0.5 m from specified data) including rail fixtures. 1404 EQUIPMENT - ROTATING 1405 Handling and transportation of Rotating Equipment & miscellaneous items of equipment package from Owners storage points to work site / contractors stores, assembly of sub-assemblies, field assembly (as applicable) placing the equipment on foundations,(including some amount of cutting, welding & field joints wherever required), levelling, aligning, fixation of foundation bolts, providing (including supply) packing / shim plates (as applicable), including chipping & dressing of foundations, grouting (including supply and application of grout material, equipment base frame filling as per vendor recommendation with specified grout), cleaning and flushing, draining and drying, purging of lines, and providing manpower and tools / equipmentforNDT, testing, carrying out trial and start-up runs and testing under supervision of manufactures / customer personnel, rectifying defects (if any), insulation (as applicable),precommissioning and commissioning (as applicable) and completing the work in all respects as per drawings, job specifications / scope of work and instructions of Engineer-in-charge for each equipment including drivers and accessories, as listed below.NOTE: Scope also includes erection, fabrication, insulation (as applicable), welding & field joints wherever required, installation & NDT of vendor supplied prefabricated spools / commercial length between various skids of an equipment package (payable at the rate provided against piping SOR items). 1406 Pump Packages (all types) with drivers, auxiliaries and accessories. 1407 All Types of Pumps (Electric Motor Driven) along with driver, auxiliaries and accessories (Single Skid). 1408 Chemical Dosing Packages 1409 Skid mounted chemical dosing packages along with all auxiliaries and accessories. 1410 Procurement of Rotating Equipment Packages by Contractor.Engineering and Procurement of Rotating Equipment, handling and transportation of Rotating Equipment & miscellaneous items of equipment package from Owners storage points to work site / contractors stores, assembly of sub-assemblies, field assembly (as applicable) placing the equipment on foundations,(including some amount of cutting, welding & field joints wherever required), levelling, aligning, fixation of foundation bolts, providing (including supply) packing / shim plates (as applicable), including chipping & dressing of foundations, grouting (including supply and application of grout material, equipment base frame filling as per vendor recommendation with specified grout), cleaning and flushing, draining and drying, purging of lines, and providing manpower and tools / equipmentforNDT, testing, carrying out trial and start-up runs and testing under supervision of manufactures / customer personnel, rectifying defects (if any), insulation (as applicable),precommissioning and commissioning (as applicable) and completing the work in all respects as per drawings, job specifications / scope of work and instructions of Engineer-in-charge for each equipment including drivers and accessories, as listed below.NOTE: Scope also includes erection, fabrication, insulation (as applicable), welding & field joints wherever required, installation & NDT of vendor supplied prefabricated spools / commercial length between various skids of an equipment package (payable at the rate provided against piping SOR items). 1411 Diesel Engine based Electric Generator Set Packages with auxiliaries and accessories. 1412 Equipment Tag No. 701-DG-001 as per Document No. B861-000-80-42-SOW-3001 1413 EQUIPMENT - STATIC 1414 STORAGE TANKS 1415 PLATE WORK 1416 Plate work for Fixed Roof Tanks (Cone and Dome roof tanks) and covered Floating Roof tanks except Floating Roof:Procurement of all plates as per specifications, transportation to work site, fabrication and erection of shell, bottom (Sketch plates and annular plates including backing strips), cone roof, Dome roof, compression ring/knuckle plate, plate fabricated wind girders, wind girder opening, bearing plates for pipe supports, datum plates, shell manhole- necks, bolting and cover flanges for shell-man-holes, reinforcement pads for shell manholes, nozzle reinforcing pads, roof manhole-necks, bolting and cover flanges for roof manholes, reinforcing pads for Roof manholes, clean-out door assembly (including davit assembly), gusset- support for wind girders, Sump for drain nozzle, pads for all appurtenances and attachments, fabrication and installation of all items as per drawing, conducting tests such as vacuum test, MP/DP test, pneumatic test, oil penetrant examination, Grouting work (including the supply of grouting material, as required for the tanks installed on ring wall foundation) underneath the Annular/ bottom plateas per the specifications attached, tank hydrotest, etc. for shell, bottom and roof as specified, radiography including supply of films, all heat treatment specified in drawings/ specifications/ codes, preparation of drawings as per specifications, standards and relevant codes and getting the same reviewed by Owner/EIL, providing all temporary structures, clamps, wedges, including arrangement of all materials, consumables, labour, equipment, machinery, tools, tackles etc. to complete the work in all respects as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge.All bolting, gaskets wherever required as per scope of supply and scope of work shall be supplied and installed by Contractor. Spares 10% bolting (min. 2 nos.) and 200% spare gaskets shall be included in Contractors scope. Any other (Commissioning etc.) spares as mentioned in tender specifications shall be also be included in Contractors scope.Quoted price shall be inclusive of supply of all bolts, nuts, gaskets including spares. 1417 IS 2062 Gr. E250 (A, BR, B0, C) 1418 SA 516 Gr. 60/ 70 1419 STRUCTURAL/PIPES 1420 STRUCTURAL/ PLATE WORK :Supply, fabrication, erection, inspection and testing of steel structure for cone roof/ dome roof supporting structure including curb angle, spiral stairway, cage ladder, handrail, top and intermediate platform, grating for stairway steps and platform, rolling ladder including track for floating roof, anchor chairs,name plates, earthing connections, ladder rungs for ladders in covered roof tanks, wind girder fabricated from rolled section, wind girder bracings/ support, external structural supports, supports for shell extension for foam nozzles in case of floating roof tanks, stiffeners for shell extension plate of stairway, ventilation slots and over flow slots for covered floating roof tank including SS wire mesh, preparation of drawings, getting the same reviewed/ approved by owner/ EIL, arrangement of all materials, consumables, labour, equipment/ machinery, tools and tackles required to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1421 Roof structure as per Standard/Drg. 1422 SA 36 1423 IS 2062 1424 SA 516 Gr.60/70 1425 STILL WELLS/ DIP PIPES :Supply, fabrication, erection, inspection and testing ofstill well for gauge hatch, still well for level transmitter/ level switches, still well for temperature element including flanges on all still wells, dip pipes (process / instrumentation), pipe fittings, drilling of holes in still well/ dip pipes, arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1426 SA 333 GR6 1427 SA 106 Gr. B 1428 STRUCTURAL PIPES (CS GALVANISED):Supply, fabrication, erection, inspection and testing of pipe specification for pipe handrails (CS and galvanised), arrangement of all materials, consumables, labour to complete the work as per drawings, specifications, standards, codes, scope of work, scope of supply and instructions of Engineer- in-Charge. All materials to be supplied by Contractor. 1429 PIPES(CS GALVANIZED) 1430 APPURTENANCES 1431 Supply, fabrication, installation, welding, radiography, heat treatment, inspection and testing as required for the following nozzles (reinforcing pads covered under plate work) pipe, nozzle flanges and blind / companion/matching flanges (including davit/ hinge assembly for Man way) wherever shown on drawings and standards along with gaskets and boltings including supply of mandatory spares, conducting air pressure test for reinforcing pads, preparation of drawings, getting the same reviewed by Owner/EIL, arrangement of all materials, consumables, labour to complete the work as per drawings, specifications , standards, codes, scope of work, scope of supply and instructions of Engineer-in- Charge. All internal bolting shall be SS 304 as a minimum and contractor shall include the same in his scope of supply and shall be included in nozzleassembly quoted price. Spare gaskets ( 2 nos.) and 10% spare bolting (minimum 2 nos.) shall be included in Contractors scope of supply and shall be included in nozzle assembly quoted price. 1432 Roof Nozzle 150 Class WNRF Type 1.5 InchSize SA 350 LF2 Material 1433 Roof Nozzle 150 Class WNRF Type 2 InchSize SA 105 Material 1434 Roof Nozzle 150 Class WNRF Type 8 InchSize SA 105 Material 1435 Shell Nozzle 150 Class WNRF Type 2 InchSize SA 105 Material 1436 Shell Nozzle 150 Class WNRF Type 4 InchSize SA 105 Material 1437 Shell Nozzle 150 Class WNRF Type 6 InchSize SA 105 Material 1438 Roof Nozzle 150 Class WNRF Type 2 InchSize SA 350 LF2 Material 1439 Roof Nozzle 150 Class WNRF Type 3 InchSize SA 350 LF2 Material 1440 Roof Nozzle 300 Class WNRF Type 3 InchSize SA 350 LF2 Material 1441 Roof Nozzle 150 Class WNRF Type 6 InchSize SA 350 LF2 Material 1442 Roof Nozzle 150 Class WNRF Type 8 InchSize SA 350 LF2 Material 1443 Shell Nozzle 150 Class WNRF Type 2 InchSize SA 350 LF2 Material 1444 Shell Nozzle 150 Class WNRF Type 3 InchSize SA 350 LF2 Material 1445 GOOSE NECK VENT WITH WIRE MESH:supply of materials,fabrication, installation,welding, radiography, heat treatment, inspection and testing as required for the (reinforcement pads covered under Plate work) goose neck vent with wire mesh (SS 304 as minimum) for the following vent materials. 1446 Size 2 InchMaterial SA 106 Gr. B 1447 INSTRUMENTS 1448 Transportation of following instruments from Owner/Storage yard/stores and installation of the same in position as per instructions of Engineer-in-Charge/Supplier. (Contractor shall take care so that no damage occurs while handling these instruments). 1449 Pressure Transmitter Instrument 1450 Level Transmitter Instrument 1451 Breather Valve Instrument 1452 Emergency Vent Instrument 1453 Temperature Gauge Instrument 1454 CALIBRATIONCarrying out calibration of tanks including supply of strapping tapes, scaffolding wherever required, arranging the visit of competent authority, all accessories, labour, preparation and submission of calibration charts duly approved by Competent authority etc. and complete the work in all respect as per Codes, specifications, standards and instructions of Engineer-in-Charge 1455 Diameter (Meters) : upto 10 Height (Meters) : upto10 1456 Diameter (Meters) : > 10 to 25 Height (Meters) : > 10 1457 DESIGN, SUPPLY & INSTALLATION OF EMERGENCY VENT (Lumpsum)Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery, documentation as per the enclosed M/s EIL specification and installation of Emergency Vent etc. to the satisfaction of the Engineer- in Charge. 1458 DESIGN, SUPPLY & INSTALLATION OF BREATHER VALVE (Lumpsum):Design, engineering, manufacture, procurement of materials and bought out components, assembly at shop, inspection, testing at manufacturers works, packing, delivery, documentation as per the enclosed EIL specification and installation of breather valves etc. to the satisfaction of the Engineer-in-charge. 1459 Gauge Hatch with Cover:Supply & installation of Gauge Hatch with Cover for the tankages mentioned in the data sheets/ drawings/ specifications as per the Specifications & Standards attached with the tender. Arrangement of machinery, tools & tackles, labour etc. to accomplish the installation of the same shall also be in the scope of Contractor. The following Gauge Hatch with cover are required. 1460 Material: CS 1461 PAINTING OF TANKS 1462 PAINTING FOR CARBON STEEL AND LOW ALLOY STEEL TANKS 1463 ExternalSurfaces (except underside of bottom plate): Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint onallexternalsurfacesoftanksincluding insulatedtanks i.e.externalshell,windgirders,appurtenances,rooftops including top sideoffloatingroofofopentanksaswellascovered floatingrooftanks, external roof supporting structure,associatedstructuralsteelworks,ladders,walkways, platforms,handrails,spiralstairway,rollingladderandtrack, internal surface of shell above maximum liquid level exposed to atmosphere for open top or floating roof tanks asper painting system defined below and otherrequirementsasspecifiedinrespectiveEngg.datasheets, stencillingtankno., capacity, name of storedproduct,paintingEmblem aspertheattachedsample,includingsupply of metallicandnon-metallic materials,primerandpaintofapprovedquality,providingscaffolding, labour,equipment,consumables,etc.tocompletetheworkinall respect asperapplicable standard specifications,standardsattached elsewhere in the tender document andinstructionsofEngineer- in-Charge. All materials shall be supplied by Contractor. 1464 Design Temperature Range: (-) 14 °CTo 80 °CPrimer: 1coat of F-9 @ 65-75μ DFT/coat + 1coat of P-6 @ 40μ DFT/ coat Finish Paint: 2 coats of F-6B @ 100μ DFT /coat + 1 coat of F-2 @ 40μ DFT/ coat Remarks: Total DFT in Microns (minimum) = 345-355 1465 ExternalSurfaces (underside of bottom plate): Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint onunderside of bottom plate (soil side) asper painting system defined below and otherrequirementsasspecifiedinrespectiveEngg.datasheets includingsupplyofmetallicandnon-metallic materials,primerandpaintofapprovedquality,labour,equipment,consumables,etc.tocompletetheworkinall respect,asperapplicable standard specifications,standardsattached elsewhere in the tender document andinstructionsofEngineer- in-Charge. All materials shall be supplied by Contractor. 1466 Design Temperature range (-) 14°C to 80°C, Primer : 1 coat of F-9@ 65-75µ DFT/coat,Finish Paint : 3 coats of F-7 @ 100µ DFT /coat. 1467 Design Temperature Range: -29 °CTo 400 °CPrimer: 1 coat of F-16 @125 micron Finish Paint: 1 coat of F-16 @125 micron Remarks: total DFT : 250-300 micron 1468 InternalSurfaces:Surfacepreparation to SSPC-SP-10,applicationofprimerandpaint oninternalsurfaceofbottomplate,shell full height,internal surfacesofcone/dome roof,roofstructure,oil side surfacesofpontoons & deck platesandoil side surfaces of doubledecks,internalladder,structuralsteel, internalsupportandinternalaccessories(exceptheatingcoil)asper painting system defined below and requirementsasgiven in the respective engg.datasheets. Supply of metallic and non-metallic materials, labour, primer andpaint of approved quality, equipment, consumables,etc. to complete the work in allrespect, as per applicable specifications, standardsattached elsewhere in the tender document and instructions of Engineer- in-Charge. All materials shall be supplied by Contractor. 1469 Design Temperature Range: -14 °CTo 60 °CPrimer: 1 Coat of F-6A@100 µ DFT/coat Finish Paint 2 Coats of F-6A@ 100µ DFT/Coat(2x100=200) Remarks: - 1470 Design Temperature Range: - °CTo - °CPrimer: - Finish Paint 3 coats of vinylchloride co- polymer @ 75µ/Coat; (3x75=225) Remarks: - 1471 EQUIPMENT ERECTION 1472 TOUCH-UP PAINT APPLICATION (UNINSULATED EQUIPMENT) FOR CS VESSEL 1473 Application of field primers and finish paint(Supply by Others) on C.S vessels, PHE and other equipment, including rubdown and touch up of shop primer (primer as per applicable specification) wherever required as per attached specification, providing scaffolding for all heights, labour, material, tools and tackles, consumables, supervision etc. to complete the work in all respect as per specifications, drawings, equipment details for painting and direction of Engineer in-Charge for all type of uninsulated equipment. The surface area is as per respective temperature ranges given in applicable specification. Note: Surface preparation, primer and finish paint already carried out by equipment supplier. 1474 EQUIPMENT ERECTION:Transportation of reactors, columns, vessels, silencers, heat exchangers (shell and tube, plate fin, plate) and electric heater etc. from owners storage point to work site, assembly of parts, subassemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation bolts, welding of washer on anchor chairs, erection of wooden pillow for cold equipments, stacking of multi-tier exchanger(which are stored in unstacked condition), arranging hooks for test ring/ test flanges in heat exchangers, installation of demister, internal gratings, distributor, pipe davit, installation of mixer/agitator,cleaning and flushing by water, draining, drying by compressed air, arranging all tools, tackles, machinery, consumables, transportation equipment, erection equipment, instruments, labour, ancillary, etc. to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1475 Equipment weighing less than 30 MT but 10 MT and above 1476 TOUCH-UP PAINT APPLICATION (INSULATED EQUIPMENT) FOR CS VESSEL 1477 Application of field primers and finish paint(Supply by Others) on C.S vessels, PHE and other equipment, including rubdown and touch up of shop primer (primer as per applicable specification) wherever required, as per attached specification, providing scaffolding for all heights, labour, materials, tools and tackles, consumables and supervision etc. to complete the work in all respect as per specifications, drawings, equipment details for painting and direction of Engineer in-Charge. The surface area is as per respective temperature ranges given in applicable specification. Note: Surface preparation, primer and finish paint shall be provided by equipment supplier. 1478 EQUIPMENT UNLOADING: Unloading of Equipment from trailer at designated receiving point, Transportation of the same and handling over to owner at designated storage point for the following as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1479 Equipment weighing less than 50 MT but 30 MT and Above 1480 Equipment weighing less than 30 MT but 10 MT and above 1481 LETTERING AND STENCILING:Surface preparation, supply and application of primer and paint on insulated and uninsulated equipment for lettering, stenciling on vessels, columns, drums, for the purposes of identification (Equipment Name, Equipment Number & Service Description) as per applicable painting specification enclosed elsewhere in the tender document, arranging scaffolding for all heights, labour, materials, tools, tackles, supervision etc. to complete the work as per specifications and instructions of Engineer-in- Charge. 1482 ERECTION OF DRESSED-UP EQUIPMENT:Transportation of columns and vessels from owners storage point to work site, dressing up of the column/vessel by contractor , assembly of parts, subassemblies, erection at all elevations, aligning, verticality checking, grouting, tightening of foundation bolts, welding of washer on anchor chairs,arranging all tools, tackles, machinery, consumables,erection of completely dressed-up equipment, & arranging allinstruments, labour, ancillary, etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge.Dressing up of column(As applicable as per the requirement of the tender): Supply/Application/installation of insulation, installation of ladders and platforms, installation of piping spool and support (wherever applicable), installation of demister, internal gratings, distributor, pipe davit etc on the Column/Vessel, cleaning and flushing by water, draining, drying by compressed air etc to complete the job in all respects as per the requirements of the specifications & standards attached else where in the tender. 1483 Equipment(Dressed-up) weighing less than 50 MT but 30 MT and Above 1484 ERECTION OF BURIED EQUIPMENT : Transportation of vessels from Owners storage point to worksite, repair/ touch up of finish paint, arrangement of all accessories, equipments, labour etc., placing/erection of vessel in trenches/pits including assembly of parts, subassemblies, aligning, verticality checking, grouting, tightening of foundation bolts,arranging all tools, tackles, machinery, consumables etc to complete the work in all respects as per drawings, equipment detail, specifications and instructions of the Engineer-in-Charge. 1485 Equipment weighing less than 30 MT but 10 MT and Above 1486 WELDING & NDT OF CUT NOZZLES / SUMP / BOOT OF BURRIED VESSELS:Assembly of cut nozzles/Sump/Boot(as shown in Respective Engg. Data Sheet), vertically checking, alignment, Welding of cut nozzles , NDT such as 100% radiography ,UT , surface preparation of the weld seam portion, application of primer, painting, arranging all tools and tackles, machinery. Consumables, transportation/handling of equipment, labour etc to complete the work in all respects as per drawings & instruction of Engineer-in charge. 1487 MOC : Carbon Steel ,Nozzle size : 2 1488 MOC : Carbon Steel ,Nozzle size : 3 1489 MOC : Carbon Steel ,Nozzle size : 6 1490 MOC : Carbon Steel ,Nozzle size : 8 1491 MOC : Carbon Steel ,Nozzle size : 20 1492 MOC : Carbon Steel ,Nozzle size : 24 1493 EQUIPMENT INSULATION 1494 COLD INSULATION: Providing cold insulation including supply of all insulating andanciliarymaterial,protectivecovering,consumablesand othernecessarymaterials,testingofthematerialasrequiredincluding transportationofthematerialstoworksites,applyinginsulationon surfacesasspecified,includingallpreparatoryworksthereon,allbinding, tying,lacing,stitchingand/orotherwisesecuring,providingvapour barrier,finishingwithplain/corrugatedsheetcladdingorasspecified, providingbolts,rivets,providing vapour stop etc.arranging necessaryscaffolding,alltoolsand tackles,equipment,apparatusetc.labourandsupervisionandcompleting theworkinallrespectatallheightsasperdrawings,specificationsand instructionsofEngineer-in-Charge. 1495 Shells of vertical vessels, columns, exchangers, reactors, silencers etc.Surface material:CS/AS. Insulation type:Ic (Polyurethane foam). Service: Other than LNG. 1496 Insulation Thickness: 50mm 1497 Shells and heads of horizontal vessels, columns, reactors, exchangers, silencers etc and heads of above mentioned vertical equipments. Surface material: CS/AS. Insulation type:Ic (Polyurethane foam). Service: Other than LNG. 1498 Insulation Thickness: 50mm 1499 STRUCTURAL 1500 EARTH WORK (REFER SPECIFICATION NO. 6-68-0003) 1501 Earthwork excavation in soil 1502 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1503 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 1.5m and upto and inclusive of 3.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1504 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 3.0m and upto & inclusive of 4.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1505 Earth work in EXCAVATION below ground level for all kinds of works in ALL TYPES OF SOILS EXCEPT SOFT ROCK AND HARD ROCK as classified in specification for a depth beyond 4.5m and upto & inclusive of 6.0m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting. 1506 SHORING AND STRUTTING 1507 Providing and installing approved type of SHORING AND STRUTTING by open timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed. 1508 Providing and installing approved type of SHORING AND STRUTTING by close timbering method for all depths to retain earth including dismantling and removal of the same etc. from site after completion of work etc. all complete as directed. 1509 Backfilling after execution of work 1510 BACKFILLING after execution of the WORK to proper grade and level with selected materials from available excavated soil from spoil heaps within a LEAD OF 100M, including re- excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 Cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete. 1511 BACKFILLING after execution of the WORK to proper grade and level with selected materials from available excavated soil from spoil heaps beyond a LEAD OF 100M AND UPTO & INCLUSIVE OF 500M including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 Cms. watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete. 1512 Transporting & Disposing the SURPLUS EARTH ANDDEBRIS 1513 Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 100M AND UPTO 1KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids). 1514 Transporting and disposing the SURPLUS EARTH AND DEBRIS including shrubs and vegetations from construction area beyond the initial LEAD OF 1.0KM AND UPTO & INCLUSIVE OF 3.0KM including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. For carting on the basis of truck measurements (volume of truck reduced by 30% for voids). 1515 PLAIN & REINFORCED CEMENT CONCRETE: (REFER SPECIFICATION NO. 6-68-0004) 1516 PCC - Non FIM Items 1517 Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 Cement: 5 Coarse Sand: 10 Crushed Stone Aggregates/Gravels) with 40mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1518 Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations, drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing, etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete grade M20 with 20mm and down size graded crushed stone aggregates/Gravels. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1519 RCC Substrutures - Non FIM Items 1520 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. foundations, raft, beams, slabs, pile caps, retaining walls, dyke walls, jambs, counterforts, buttresses, pedestals, pipe sleepers, columns, suspended floors, staircases, landings, steps, brackets etc., including equipment/ machine foundations & pedestals viz. compressors, ID & FD fans, pumps, generators, crushers, mills, etc., (including single pour concreting as specified on the drawing), applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1521 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUB-STRUCTURE e.g. trenches, culverts, manholes, pipe encasement, catchpits, drains, pits, etc., applying cement wash on concrete surface (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering, etc., wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING & SPECIFIED ADMIXTURES) for all depths below and upto plinth level in any shape, position and thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1522 RCC Superstructures - Non FIM Items 1523 Providing and laying REINFORCED CEMENT CONCRETE OF M-30 GRADE with 20 mm and down size graded crushed stone aggregates/ gravel in SUPER STRUCTURE in suspended floors, slabs, beams, columns, walls including counterforts, staircases, landings, steps, facias, fins, mouldings, gutters, shelves, window sills, canopies, lintels, girders, ducts, brackets, chajjas with drip moulds, pedestals, posts, struts, equipment/ machine foundations, ramps etc. (including single pour concreting as specified on the drawing), providing cement wash (wherever no other surface application is specified), providing pockets, openings, recesses, chamfering wherever required, vibrating, tamping, curing and rendering if required to give a smooth and even surface etc. (EXCLUDING THE COST OF REINFORCEMENT, SHUTTERING AND SPECIFIED ADMIXTURES) FOR ALL HEIGHTS UPTO & INCLUSIVE OF 20 m ABOVE PLINTH LEVEL in any shape, position, thickness etc. all complete as specified, shown and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1524 HYD Bars / MS Bars - Non FIM Items 1525 Supplying and placing in position HIGH YEILD-STRENGTH DEFORMED STEEL BARS REINFORCEMENT of Grade Fe500D (TMT) conforming to IS:1786, for RCC work including transporting the Steel, straightening, cleaning, decoiling, cutting, bending to required shapes and lengths as per details, binding with 18 SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fanhooks etc. for all heights and depths etc. all complete as directed. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. 1526 Centering and Shuttering - Non FIM Items 1527 Providing and fixing CENTERING AND SHUTTERING in foundations, footings,raft beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, equipment/machine foundations, pedestals, abutments, pipe sleepers, columns, plinth beams, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/bunkers/ silos/ shafts/ hoppers/liquid storage structures etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1528 Providing and fixing CENTERING AND SHUTTERING in superstrctures in retaining walls, jambs, counter-forts, buttresses, equipment/ machine foundations, abutments,columns, lintels, suspended slabs, beams, staircases, landings, steps, non-circular tunnels/ bunkers/ silos/ shafts/ hoppers/ liquid storage structures etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1529 Providing and fixing CENTERING AND SHUTTERING for CURVED SHUTTERING in foundations in all types of Structures such as Chimneys/ Shafts/ Silos/ tunnels/ bunkers/ hoppers/ liquid storage structures/ domes/ ring wall for tanks, etc. for all depths below and upto & inclusive of plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1530 Providing and fixing CENTERING AND SHUTTERING for CURVED SHUTTERING in superstructures in all types of Structures such as Chimneys/Shafts/Silos/ tunnels/bunkers/hoppers /liquid storage structures/ domes etc. for all heights above plinth level including shuttering for single pour concreting, strutting, bracing, propping etc., keeping the same in position during concreting and removal of the same after specified period etc. for Straight/ Inclined Shuttering, keeping necessary provision for inserts, projecting dowels, anchor bolts or any other fixture etc. all complete and as specified and directed. 1531 Fixing Re-bars in already cast concrete - Non FIM Items 1532 Designing, supplying and fixing rebars in already cast concrete, including drilling, cleaning hole with air blow-out & wire-brush and injecting odourless Chemical of approved make, packed in dual foil, with the help of dispenser into a hole of diameter and depth as per manufacture specification, at all levels & locations for high strength deformed steel reinforcement bars of dia. 16 mm & 20 mm of Grade Fe500D (conforming to IS:1786), DESIGNED FOR FULL TENSILE ANCHORAGE, including testing (as per manufacturers recommendations), adjusting and making good any damage done to the structure etc. all complete as specified and directed. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE EXCLUDING REINFORCEMENT BARS. 1533 CONCRETE FOR LIQUID RETAINING/LEAK PROOF STRUCTURES (REFER SPECIFICATION NO.6-68-0005 1534 RCC- Non FIM Items 1535 Providing and laying Leak Proof Reinforced Cement Concrete of GRADE M-30 (minimum Cement content shall be as per EIL Specifications) with 20 mm and down size graded crushed stone aggregates/ gravel at all positions and in any shape and thickness, in SUB-STRUCTURE, leaving pockets, recesses, vibrating, tamping, curing, testing (for leak-proofness) and rendering (if required to give smooth and even surface) in foundations, walls , beams, buttresses, columns, piers, slabs, tunnels, basements, storage bins, reservoirs etc. including cement wash (if no other surface application is specified) but excluding the cost of Reinforcement, Shuttering and specified admixtures, all complete as specified and directed. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR. 1536 Water Proofing Comp. - Non FIM Items 1537 Supplying and mixing of approved brand of integral WATER PROOFING COMPOUND in cement concrete, cement mortar etc. as per manufacturers specifications or 1% by weight of cement (whichever is minimum), to make it leak proof/ water tight etc. all complete as specified and directed. 1538 PVC Water bars - Non FIM Items 1539 Supplying and fixing in position 230mm wide x 5mm thick approved PVC WATER STOPS as per manufacturers specifications in R.C.C. Structures including cutting, fixing, jointing by vulcanising etc. all complete as shown specified and directed. 1540 Separation Layer - NonFIM Item 1541 Supplying and laying separating layer of approved polythylene sheet of mass 1 kg/sqm (minimum) in between base slab and the layer of lean concrete, including cleaning, preparing of surfaces, etc., all complete and as directed by the engineer-in-charge. 1542 STRUCTURAL STEEL WORKSSPEC NO. 6-68-0006 1543 General Steel Works - FIM Items 1544 Transporting from storage yard (or any other location as specified by engineer-in-charge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated STRUCTURAL STEEL (of any Grade)at all locations and levels UPTO & INCLUSIVE OF 20 m ABOVE HPP/ FGL, including all builtup sections/ compound sections made out of rolled/ hollow sections and/or plates/ bent plates in all types of structural frameworks, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified etc., all complete. ALREADY FABRICATED STRUCTURAL STEEL SHALL (WITH CONNECTION BOLTS) BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE. 1545 General Steel Works - Non FIM Items 1546 Supplying, transporting, storing, fabricating & erecting in position and testing/ examining bolted and/ or welded STRUCTURAL STEEL WORKS of Grade E350BR / E350B0 (conforming to IS:2062) at all locations and levels UPTO & INCLUSIVE OF 20 m ABOVE HPP/ FGL, including all builtup sections/ compound sections made out of rolled sections and/ or plates/ bent plates in all types of structural frameworks, floor beams, stairs, or any other structural items or accessories to support equipments, piping, conveyor galleries, towers, masts, etc., but excluding silos, bunkers, hoppers, etc., cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints, (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, grouting with Ordinary Grout or premix free flow Nonshrink Grout as specified, including preparation and submission of detailed fabrication drawings, preparing the surface for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per jOb Specification No. B861-000-06-42-PLS-01 after fabrication etc., all complete. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. 1547 Painting - Non FIM Items 1548 Supplying and applying FIELD PAINT SYSTEM of approved quality and shade as per Sl. No. 5.2 of Table 5.0 of JOB Specification No. B861-000-06-42-PLS-01 over the coat of shop primer already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat as per Sl. No. 3.1 of Table 3.0 of JOB Specification No. B861-000-06-42-PLS-01 for steel structures (excluding ladders, spiral stairways & hand rails) at all location & levels, all complete as specified, in OFFISTE (COASTAL) areas as well as UNIT (INLAND & COASTAL) areas. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. (Unit rate based on Structural steel weight). 1549 Supplying and applying COATING (Post-erection/ Field) of approved quality and shade as per Sl. No. 4.1 of Table 4.0 of JOB Specification No. B861-000-06-42-PLS-01 for painting over the coat of shop primer & galvanization already applied, including storage, surface preparation, degreasing, cleaning, drying, providing necessary arrangement for access, testing etc. including touching up of shop primer coat, for LADDERS, SPIRAL STAIRWAYS & HAND RAILS at all location & levels, all complete as specified. SUPPLY OF ALL MATERIAL IN CONTRACTORS SCOPE. (Unit rate based on weight of steel). 1550 STRUCTURAL STEEL WORKS (TUBULAR/HOLLOW SECTION) (REFER SPECIFICATION NO.6-68-0007) 1551 Yst310 IS 4923 1552 Supplying, transporting, storing, fabricating, erecting in position & testing/examining at all locations and levels, bolted and/or welded STRUCTURAL STEEL WORKS of all types using COLD FORMED (RECTANGULAR/SQUARE) HOLLOW SECTIONS conforming to IS: 4923, Grade Yst-310 of approved make in all type of trusses, purlins, girders, side rails, columns, runners, beams, ties, portals, framework, bracing, brackets, sag rods etc. including all handling straightening/ bending if required, cutting to required size & shape, edge preparation, welding & bolting of joints, providing and fixing end caps and plugging holes, fixing in line and level with necessary temporary staging and removal of the same after erection, grouting with Ordinary/ premix free flow Non- Shrink Grout as specified, preparation and submission of detailed fabrication drawings, preparing the exposed surfaces for painting (SSPC-SP-10) and applying pre-erection/ shop primer (1 coat of F-9 @ 65-75 micron DFT) as per Job Specification No. B861-000-06-42-PLS-01. all complete as specified and directed (SUPPLY OF ALL MATERIALS INCLUDING PLATES IN CONTRACTORS SCOPE) 1553 MISCELLANEOUS STEEL WORKS SPECIFICATIONS NO. 6-68-0008 1554 Anchor Bolts - Non FIM Items 1555 Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED ANCHOR BOLTS of all diameters and nomenclature including nuts, washers, anchor plates, pipe sleeves etc. in foundations, columns, pedestals, slabs, beams, walls etc. or any other place as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading, welding, providing necessary templates and auxiliary dummy structures, if any, necessary tying and welding with reinforcement, adjustment of shuttering & reinforcement/any other fixture, greasing exposed metal surfaces, covering bolts and packing the sleeves with jute cloth etc. all complete as specified and directed.(SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1556 MS Metal Inserts - Non FIM Items 1557 Supplying, transporting, storing, fabricating and fixing in position M.S. METAL INSERT (with lugs) of any shape made out of flats, plates, rolled sections, pipes etc. providing necessary templates, staging, cutting, straightening, if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/ any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support the heavy inserts, painting exposed surfaces with a coat of primer as per EIL Specification No. 6-79-0020 (or as per Job Specification wherever applicable), etc. all complete for all depths and heights as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1558 GI Pipe Sleeves - Non FIM Items 1559 Supplying, fabricating and fixing in position G.I. PIPE SLEEVES of all diameters including providing necessary staging, cutting, straightening if required, bolting, welding as required and embedding in position on both Plain and Reinforced Cement concrete members inclusive of adjusting shuttering & reinforcement/any other fixture, welding where necessary, tying and holding to correct level, line and position, any auxiliary dummy structures to support heavy sleeves etc. all complete for all depths and heights as specified and directed. 1560 MS Chequered Plates - Non FIM Items 1561 Supplying, fabricating and erecting in position at all levels and locations bolted, screwed and/or welded M.S. CHEQUERED PLATES of any thickness in walkways, platforms, stair treads, any other place as directed etc. including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing, welding, preparation and submission of fabrication drawings and preparing the surfaces for painting and applying shop primer as per EIL Specification No. 6-79-0020 (or Job Specification, wherever applicable) after fabrication etc. all complete as specified and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1562 MS Grating Cat. A,B - Non FIM Items 1563 Transporting from storage yard (or any other location as specified by engineer-incharge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated Grating for platforms etc., including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening, making the edges smooth, removing the burrs (if required), fixing, tack welding, all complete as specified and directed ALREADY FABRICATED GRATING (WITH CONNECTION BOLTS/CLAMPS) SHALL BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE). 1564 Supplying, fabricating and erecting in position at all levels and locations ELECTROFORGED HOT-DIP GALVANISED GRATING (purchased from approved manufacturer by the Contractor) conforming to EIL Standard No. 7-68-0697 (in walkways, platforms, stair treads etc.) including cutting to required size, shape, making holes, notches, openings of required size, nosing, straightening if required, making the edges smooth, removing the burrs, fixing with manufacturers supplied Hot-dip galvanised clamps, preparation and submission of fabrication drawings, all complete as specified and directed. SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE. 1565 Making openings in galvanized grating for pipes / ducts etc., at all levels and at at all locations by cutting the existing grating and providing 50x6 galvanised flat as toe protection for the openings by welding and application of galvanized paint as per EIL Standard No. 7-68-0697, all complete. Payment shall be made as per number of openings. 1566 MS Rungs - Non FIM Items 1567 Supplying, fabricating, fixing and keeping in position M.S. RUNGS in R.C.C. works at all depths and heights including handling, transporting the steel to site workshop and site of work, straightening, if required, cutting, bending to shape, necessary tying and welding with reinforcement, adjustment of shuttering, cleaning, surface preparation, shop primer as per EIL Spec. 6-79-0020 (or Job Specification, wherever applicable)and two coats of anticorrosive paint of approved quality on the exposed portion of rungs etc. all complete as specified and directed (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1568 Hand Railing 1000mm - Non FIM Items 1569 Supplying, fabricating and fixing in position at all locations 1000mm high INCLINED HAND RAILING (for staircases) consisting of top rail, mid rail and vertical posts (Maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade M.S. Tubes conforming to IS:1239 including straightening if required, cutting, bending, welding, bolting, grouting with ordinary grout, cleaning, surface preparation, hot-dip galvanising (80-85 micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1 coat of P6 of 40 micron) as per Sl. No. 4.1 of Table 4.0 of JOB SPEC. B861-000-06-42-PLS-01 preparation and submission of fabrication drawings etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed). 1570 Supplying, fabricating and fixing in position at all locations 1000mm high HORIZONTAL HAND RAILING (for platforms, walkways, etc. or any other location as directed) consisting of top rail, mid rail and vertical posts (Maximum spacing 1500mm c/c) with 32mm nominal diameter medium grade MS Tubes conforming to IS:1239 and 100x5 MS Toe Plate confirming to IS:2062 (Grade A/B), including straightening if required, cutting, bending, welding, bolting, grouting with ordinary grout, cleaning, surface preparation, hot-dip galvanising (80-85 micron as per IS:4759, IS:2629, IS: 4736, IS:2633), shop primer (1 coat of P6 of 40 micron) as per Sl. No. 4.1 of Table 4.0 of JOB SPEC. B861-000-06-42-PLS-01, preparation and submission of fabrication drawings etc. all complete as specified, shown and directed. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). (Complete handrail work shall be measured as length of top rail only and not length of each element fixed). 1571 Transporting from storage yard (or any other location as specified by engineer-incharge), Storing, Assembling and Erecting in position and testing/ examining, bolted and/ or welded, already Fabricated HAND RAILING for platforms etc. including straightening, cutting, bending (if required) welding, bolting, grouting with ordinary grout, all complete as specified and directed. ALREADY FABRICATED HANDRAILING (WITH CONNECTION BOLTS) SHALL BE PROVIDED TO CONTRACTOR FREE OF COST. SUPPLY OF ALL OTHER MATERIAL IN CONTRACTORS SCOPE. (Complete handrail workshall be measured as length of top rail only and not length of each element fixed) 1572 Mechanical Anchor fastners - Non FIM Items 1573 Supplying, handling, transporting to site of work and fixing approved MECHANICAL ANCHOR FASTENERS M.S. bolts of Grade 5.8 or more, GALVANIZED with minimum thickness of 5 microns (approved for use in cracked concrete), of 12mm dia at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush, and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1574 Supplying, handling, transporting to site of work and fixing approved MECHANICAL ANCHOR FASTENERS M.S. bolts of Grade 5.8 or more, GALVANIZED with minimum thickness of 5 microns (approved for use in cracked concrete), of 16mm dia at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush, and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1575 Chemical Anchor Fastner 1576 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 12mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size, testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1577 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete), packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 16mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size., testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1578 Supplying, handling, transporting to site of work and fixing approved CHEMICAL ANCHOR FASTENERS consisting of M.S. threaded rod of Grade 5.8, GALVANIZED with minimum thickness of 5 microns and chemical (approved for use in cracked concrete),packed in flexible chemical foil or dual foil type, to be usedwith the help of dispenser, of 20mm dia. at specified positions on concrete floors, roofs, beams (sides and bottom), walls, columns etc. according to manufacturers specifications including all accessories like nuts, washers etc. of required size., testing, necessary scaffolding, drilling of the holes in concrete surface with electric drill, cleaning of holes with air blowout & wire-brush and making good any damage done to the structure etc. all complete for all heights, depths and locations as specified and directed. 1579 Threaded bolts for equipment fixing-Non FIM 1580 Supplying, fabricating, fixing and keeping in position at all levels and locations THREADED BOLTS of Grade C property class 4.8 as per IS:1363 (part 2) of all diameters and length including nuts, washers for supporting equipment on steel structure as directed including handling & transporting, straightening if required, turning from relevant size M.S. rounds to required diameter, threading etc. (SUPPLY OF ALL MATERIALS IN CONTRACTORS SCOPE). 1581 BRICK MASONRY (REFER SPECIFICATION NO.6-68-0009) 1582 CLASS 5.0at all depths -Non FIM Items 1583 Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 5.0 in cement mortar 1:6 (1 Cement : 6 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all depths below plinth level including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1584 Providing and laying BRICK MASONRY WITH BRICKS OF CLASS 5.0 in cement mortar 1:6 (1 Cement : 6 Sand) in one or more brick thickness and in any shape (excluding circular/curved brick masonry) at all heights above plinth level including the cost of materials, labour, scaffolding/ staging, sampling & testing, soaking of bricks, cutting and laying of bricks, providing recesses, making openings of any shape & size, finishing the joints flush below ground level and raking out the joints above ground level, sealing the gap between masonry and soffit of beam/slab, embedding the fittings & fixtures, curing, etc. all complete as per specifications. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY THE CONTRACTOR. 1585 HALF BRICK MASONARYwith bricks of CLASS 5.0-Non FIM Items 1586 Providing and laying HALF BRICK MASONRY with bricks of CLASS 5.0 in cement mortar 1:4 (1 Cement : 4 Sand)in any shape, including the cost of materials, labour, scaffolding/staging, sampling and testing, soaking of bricks, cutting and laying of bricks, providing openings of any shape & size, raking out the joints, supplying and placing 2 Nos. 6mm dia. M.S. Bars at every fourth course, sealing the gap between masonry and soffit of beam/slab, embedding the fittings and fixtures, curing etc. all complete as per specification. ALL MATERIALS INCLUDING CEMENT SUPPLIED BY CONTRACTOR. 1587 DEMOLISHING AND DISMANTLING (REFER SPEC NO. 6-68-0012) 1588 Brickwork - Non FIM Items 1589 Demolishing BRICKWORK (taking all necessary safety precautions) for all depths below plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation & backfilling shall be paid separately under relevant items). 1590 Demolishing BRICKWORK (taking all necessary safety precautions) for all heights above plinth level including supply of all tools and tackles, necessary scaffolding, propping, underpinning, cleaning and stacking of serviceable material, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. 1591 RCC - Non FIM Items 1592 Demolishing RCC WORK (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation & backfilling shall be paid separately under relevant items). 1593 Demolishing RCC WORK (taking all necessary safety precautions) for all heights above plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, straightening, scraping and cleaning of reinforcement bars, stacking of serviceable materials, disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. 1594 Chipping of RCC WORK (taking all necessary safety precautions) by CHISELLING, upto & inclusive of 25mm thickness including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc., cutting, lapping/welding of reinforcement bars as per drawings, disposal of the unserviceable material to spoil heaps anywhere within the plant boundary, all complete at all heights and depths, as specified and directed. (Excavation and backfilling shall be paid separately under relevant items). 1595 Cutting/ Dismantling RCC work in pavement, slabs, beams, columns, etc upto a depth of 450 mm by using vibration-less spark-free Diamond Saw Cutter of make HILTI (or equivalent) at all depths & heights, in hazardous areas within process units & offsite which are fire prone due to presence of hydrocarbon vapours etc. taking elaborate precautions for dismantling as per fire permit, clearance etc. and work is to be done with extreme caution. The work item includes cost of all necessary accessories, tools & tacklesincluding diamond saw cutter, disposal of RCC Debris upto lead of 100 m& for all lifts (taking all safety precautions) including cutting reinforcement bars, embedded structural steel members, with necessary scaffolding, propping and underpinning etc. for all elevations with all labour and materials, all complete as per drawings, specifications and directions of the Engineer-in-charge. Payment will be made per sq.m.of cross-sectional cut area. Contractor to submit dismantling plan prior to start of dismantling. Dismantling shall be planned in such a way that each cut piece shall weigh not less than 1.6 MT. 1596 Cutting/ Dismantling of RCC block foundations, raft foundations, pile caps, mass concrete, equipment foundations etc. by using vibration-less spark-free Diamond Wire Saw Cutter of make HILTI (or equivalent) at all depths & heights, in hazardous areas within process units & offsite which are fire prone due to presence of hydrocarbon vapours etc. taking elaborate precautions for dismantling as per fire permit, clearance etc. and work is to be done with extreme caution. The work item includes cost of all necessary accessories, tools & tacklesincluding diamond saw cutter , disposal of RCC Debris upto lead of 100 m& for all lifts (taking all safety precautions) including cutting reinforcement bars, embedded structural steel members, with necessary scaffolding, propping and underpinning etc. for all elevations with all labour and materials complete as per drawings, specificationsand directions of the Engineer-in-charge. Payment will be made per sq.m.of cross-sectional cut area. Contractor to submit dismantling plan prior to start of dismantling. Dismantling shall be planned in such a way that each cut piece shall weigh not less than 1.6 MT. 1597 Pockets - Non FIM Items 1598 Making POCKETS/HOLES of sizes upto & inclusive of 200 x200x500mm in RCC/PCC works (taking all necessary safety precautions) by chiselling/drilling, including supply of all tools & tackles, necessary scaffolding etc. cutting of reinforcement bars, cleaning the pockets of all debris, disposal of the unserviceable material to spoil heaps anywhere within the plant boundary all complete at all heights & depths as specified and directed. 1599 PCC _ Non FIM Items 1600 Demolishing PLAIN CEMENT CONCRETE work (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. disposal of unserviceable material to spoil heaps anywhere within the plant boundary, all complete as specified and directed. (Excavation and backfilling shall be paid separately under relevant items) 1601 Demolishing PLAIN CEMENT CONCRETE work (taking all necessary safety precautions) for all depths below plinth level including supply of all tools & tackles, necessary scaffolding, propping, underpinning etc. stacking of all the demolished concrete material at a designated location within the complex limits, all complete as per specifications and directions of Engineer-in-Charge for further processing in mechanical crushers for generating RA/ RCA as per the specifications. (Excavation & backfilling shall be paid separately under relevant items). 1602 Steelwork - Non FIM Items 1603 Dismantling bolted/rivetted/welded STRUCTURAL STEEL WORK of all descriptions (taking all necessary safety precautions), including supply of all tools and tackles, consumables, necessary scaffolding etc., providing temporary bracings as required, cutting (by flame or saw) gusset plates, bolts, nuts, weldings etc., transporting and stacking of the serviceable materials, cleaning the site of work of all unserviceable materials for disposal to spoil heaps anywhere within the plant boundary, all complete at all depths and heights, as specified and directed. 1604 MISCELLANEOUS ITEMS (REFER SPECIFICATION NO. 6-68-0013) 1605 Anticorrosive - Non FIM Items 1606 Providing and laying 50mm thick ANTI-CORROSIVE LAYER under steel storage tanks with screened dry coarse sand mixed with A90 grade bitumen conforming to IS:73 including mixing in drum, heating to the required temperature, with 3% kerosene if required, tamping, dressing to the required slopes to form hard mass of specified compacted thickness etc. all complete as directed. 1607 Sand Filling - Non FIM Items 1608 Supplying and filling approved SAND of specified quality under floors, in foundations, plinths, tank foundations etc. for all depths and heights including cost of sand, royalties, transportation to site for all leads and lifts, including loading, unloading, spreading in layers of loose thickness not exceeding 150 mm, watering, ramming, compacting with mechanical compactors and/or other equipment to the specified levels to achieve 85% relative density as per IS:2720 Part XIV, including preparation of subgrade to the required slope, providing testing apparatus and testing the degree of consolidation all complete as per drawings, specifications and direction of Engineer-in-charge. The rates shall be inclusive of the cost of all labour, material, equipments etc. all complete . 1609 BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE 1610 Supplying and mixing of approved brand of BI-POLAR CONCRETE PENETRATING CORROSION INHIBITING ADMIXTURE (confirming to EIL Specification No. 6-68-0017) in concrete as per manufacturers specification for protection of reinforcement against corrosion. Supply of admixture in Contractors scope. 1611 BONDING FRESH CONCRETE TO OLD CONCRETE BY EPOXY RESIN BONDING SYSTEM (REFER SPECIFICATION NO. 6-68-0056) 1612 Epoxy Resin - non FIM Items 1613 Providing and applying approved EPOXY RESIN (prepared as per manufacturers recommendation) for bonding of fresh concrete to old concrete in all types of structure at all depths and heights including cleaning of concrete surface, removing of all loose concrete pieces, making rough by chiselling, taking off the skin of concrete, application of Epoxy Resin System by spraying, necessary working platforms, props, scaffolding and other safety measures, removal of same after completion etc. all complete as specified and directed. (Excavation, backfilling, removal of surplus earth, keeping pit dry by pumping/bailing subsoil water shall be paid separately under relevant items). 1614 FIREPROOFING OF STEEL STRUCTURES (REF SPEC NO 6-68-0033) 1615 Concrete - Non FIM Items 1616 Supply and laying of concrete of grade M30 as per Type-I of EIL Standard Specification 6-68-0033 as fire proofing material with 10 mm and down size graded coarse and fine aggregates including admixture around structural steel members (viz. beams, columns, bracings etc.) all complete; cleaning the steel surfaces, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, vibrating, tamping, curing or providing a layer of approved membrane of curing compound, rendering with cement sand mortar (1:3) wherever required to achieve a smooth and even surface, providing L50x50x6 at corners or as specified in the drawing, applying primer on MS nuts, angles and affected surfaces, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights upto & including 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS INCLUDING CEMENT TO BE SUPPLIED BY THE CONTRACTOR). 1617 Vermiculite Concrete for Structural Steel - Non-FIM Items 1618 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-II of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness around structural steel members (viz. beams, columns, bracings etc.) for the required fire protection from reaching temperature 538 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, applying primer on MS nuts and affected surfaces, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights upto & including 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1619 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-II of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness around structural steel members (viz. beams, columns, bracings etc.) for the required fire protection from reaching temperature 538 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062 and stiffeners for members exceeding 600 mm depth, supply and welding ofMS nuts on angle and box sections and cover blocks for other sections, supplying, placing and fixing in position galvanized expanded metal sheet with mesh size 4.5 mm x 13.5 mm conforming to IS:412 except on angle and box sections, hot dipped galvanized welded wire fabric reinforcement 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566, and tying the reinforcement to the cover blocks with galvanized 16 SWG tying wire, including cutting, straightening, cleaning, bending, applying primer on MS nuts and affected surfaces, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions at all heights more than 10 m above pavement etc. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1620 Vermiculite Concrete for Equipments - Non-FIM Items 1621 Supply and laying of vermiculite based lightweight cementitious concrete coating as per Type-III of EIL Standard Specification 6-68-0033 as fire proofing material of required thickness on equipment/ vessel skirts, saddles and supports for the required fire protection from reaching temperature 427 degree C; cleaning the steel surfaces and applying primer compatible to vermiculite material if required as per manufacturer specifications, supplying, placing and fixing in position cover plates conforming to IS:2062, hot dipped galvanized welded wire fabric reinforcement of 2 mm dia 50 mm x 50 mm mesh conforming to IS:1566 and tying the reinforcement with the pre welded nuts by galvanized 16 SWG tying wire, including straightening, cutting, bending of the reinforcement, including supplying and welding of additional MS nuts if directed by the Engineer-in-charge, applying primer wherever required, curing or providing a layer of approved membrane of curing compound, patching of damaged portion wherever required to achieve a smooth and even surface, providing chamfering at corners, supplying and laying of non-bituminous polysulfide or silicon rubber mastic sealant at terminating edges/ metal joints, painting the surfaces with sealer coat of epoxy polyamide as base and finish coats of coating system No.1 of NORSOK Standard M-501, including the cost of all labour, materials, specified tests, shuttering, staging, scaffolding, working platforms, approaches, etc. for all shapes and positions. all complete as per specifications and directions of Engineer-in-Charge. (ALL MATERIALS SHALL BE SUPPLIED BY THE CONTRACTOR). 1622 Mechanical works 1623 Supplying, fabricating and erecting in position MS plates as per detailed drawings, conforming to grade A of IS:2062 on top of all RCC pedestals supporting the sliding saddles of equipments, including cutting, straightening where necessary, rounding rounding unfinished edges by grinding, machining the exposed top surface, making necessary bolt holes, providing and laying ready mixed free flow non-shrink grout below the base plate at all levels & locations, machining top surfaces etc. all complete and as shown and directed. 1624 SAFETY (REFER EIL SPECIFICATION) 1625 Safety Structures - Non FIM Items 1626 Supplying, Transporting, Storing, Fabricating & Erecting in position and testing/ examining bolted and/ or welded Structural Steel Works at all locations and levels in HANGER SCAFFOLDING below piperack, comprising of hangar channels, fabricated pen wen ladder beams, steel planks bent to shape and size and any other sections, if required, all as per sketches/ specifications and load tested for statisfactory performance, including cutting to required size, straightening/ bending if required, edge preparation, cleaning, preheating, bolting/ welding of joints (including sealing the joints of box sections with continuous welding and plugging any open ends & holes of box sections), finishing edges by grinding, fixing in line and level with temporary staging & bracing and removal of the same after erection, including preparation and submission of detailed fabrication drawings, preparing the surface for painting as per BIS codes after fabrication etc. all complete as specified and directed. All items shall be removed & carried back by Contractor as per instructions of Engineer-in-Charge after completion of works. (Supply of All Material In Contractors Scope). 1627 Providing and fixing double scaffolding system of any height made with 40 mm dia MS tube 1.5 m centre to centre, horizontal & vertical tubes joining with MS tubes, MS tube challies, MS clamps and MS staircase system in the scaffolding for working platform/ staircase etc., and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc., wherever required for inspection of work at required locations with essential safety features for the workmen etc., all complete as per directions and approval of Engineer-in-charge. (Height shall be measured from Floor/ platform from where scaffolding is erected) including providing Aluminium ladders for safe acess of workers. 1628 Supply of Safety Personnel 1629 Supply of HSE personnel SAFETY STEWARD over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1630 Supply of HSE personnel SAFETY SUPERVISOR over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1631 Supply of HSE personnel SAFETY OFFICER over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1632 Supply of HSE personnel HOUSE-KEEPING SUPERVISOR over and above the requirement as specified in EIL Standard Specification No. 6-82-0001 at site as per the written instructions of Engineer-in-charge (the rates shall be inclusive of all other payments such as PF, ESI, other benefits payable to the workmen as per the prevalent labour laws). 1633 GENERAL CIVIL 1634 TANK PADS 1635 PVC Liner 1636 Providing and laying of PVC LINER of thickness 30 MIL conforming to IS:15909 below tank pad foundations or any other placeat all heights & depths without any damage during subsequent activities including handling, transportation, unloading, storage, laying in position, jointing & overlapping as per manufacturers recommendations, including supply and providing Asphalt impregnated fiberboards for anchoring, etc., all complete as per drawings, specifications and directions of Engineer-in-charge. (All materials including consumables shall be in contractors scope of supply) 1637 Providing and laying in position 80mm dia. perforated uPVC pipes conforming to IS:9271 wrapped with 125mm thick layer of 40mm down size stone aggregates in Geotextile fabric, Terrum T 700 / equivalent, below tank pad foundations for all heights & depths complete as per drawings, specifications and directions of Engineer-in-Charge. (All materials including consumables shall be in contractors scope of supply) 1638 Providing and installation of uPVC leak detection well arrangement comprising of 80mm dia. uPVC pipe, tee, blind flange & threaded cap conforming to IS:13592 for leak detection purpose below tank pad foundations at all heights & depths including providing proper jointing as per code requirements or manufacturers recommendations for fitting in already installed uPVC pipes etc. all complete as per drawings, specifications & directions of Engineer-in charge. 1639 GENERAL CIVIL 1640 SITE GRADING & ROCK CUTTING FOR SITE GRADING 1641 Earthwork in excavation for general site grading, roads, embankments, etc. for all heights and depths in all types of soils except soft and hard rock, including clearing and stripping of the areas earmarked for excavation, removing shrubs, grass, bushes, vegetables growth and other objectionable materials, trees up to and inclusive of a girth of 30 cms. (girth measured at a height of one meter from ground level) including uprooting of roots, etc. taking spot levels, excavating to required depth, leveling, dressing and consolidating the excavated surface, sorting out the excavated soil into serviceable and unserviceable materials, transporting and stacking serviceable materials to demarcated areas anywhere inside plant boundary limitas per instructions of Engineer-in-Charge and disposal of unserviceable material anywhere inside plant boundary limit. All complete as per drawings, specifications and directions of Engineer-in-Charge. 1642 ROADS & FLEXIBLE PAVEMENT (UPTO WBM/WMM LAYER) 1643 Earthwork in filling with approved available earth for all heights and depths for road embankments, shoulders or any other place as directed to proper levels, slopes, grades and camber with selected earth (having CBR 8%) obtained from approved approved areas for all leads from Complex Limit including excavation of earth at approved areas, clearing and stripping at approved areas (if necessary) loading, unloading, transportation etc., clearing and stripping as per specifications, uprooting of vegetation, roots and disposal of the shrubs, bushes, roots etc., breaking clods, spreading in layers not exceeding 20 cm loose thickness, watering, ramming and compacting with road roller to give at least 97% of laboratory dry density with heavy compaction as perIS:2720 Part-VIII, providing testing apparatus and testing the degree of consolidation, dressing and leveling, etc. complete including disposal of allunserviceable materials if any within the boundary limit for all leads etc. as per drawings, specifications and directions of Engineer-in- Charge. 1644 Supplying and Laying of Wet Mix Macadam (WMM) in BASE COURSE (Section 406 of MORTH Specification of Road & Bridge works) using tough, clean, sound & durable stone aggregates including premixing the material (mixing in Plug Mill/ Pan Type Mixer), including transportation to site, laying & spreading in layers not exceeding 125 mm compacted thickness & rolling with vibratory roller 80-100 KN static weight or equivalent capacity to proper grade, camber & level with all leads & liftsetc. complete as per drawing, specifications (MORTH, EIL) & directions of Engineer-in-Charge. 1645 Supply of forged/ cast fittings 1646 Supplying the following forged fittings and flanges, conforming to piping material specifications of tender documents and delivering the same to Owners stores/workspot etc. all complete as per the directions of Engineer-in- Charge. 1647 Elbow 90 Degree for following Nominal Sizes and Piping Material Class 1648 Dia. 12 InchPipe Class A33A 1649 Dia. 3 InchPipe Class A91A 1650 Elbow 45 Degree for following Nominal Sizes and Piping Material Class 1651 Dia. 6 InchPipe Class A33A 1652 Dia. 8 InchPipe Class A33A 1653 Dia. 12 InchPipe Class A33A 1654 Dia. 3 InchPipe Class A91A 1655 Eccentric Reducer for following Nom. Dia. 1 x Nom. Dia. 2 and Piping Material Class 1656 Nom. Dia. 1 8 InchNom. Dia. 2 6 InchPipe Class A94A 1657 Equal Tees for following Nominal Sizes and Piping Material Class 1658 Dia. 12 InchPipe Class A33A 1659 Dia. 3 InchPipe Class A91A 1660 Flanges, complete with nuts, bolts, gasket etc., for following Nominal Sizes and Piping Material Class 1661 Dia. 3 InchPipe Class A91A 1662 Supplying the following spectacle blind assembly consisting of two number flanges, spectacle blind, nuts, bolts, gasket etc. complete conforming to piping material specifications of tender documents and all complete as per the directions of Engineer-in-charge. For following nominal size and piping material class 1663 Dia. 3 InchPipe Class A91A 1664 MISC. CIVIL AND STRUCTURAL WORKS FOR U/G PIPING AND OTHER CIVIL WORKS 1665 Providing and laying brick masonry with locally available bricks of specified class (Brick of class lower than specifiedshall not be accepted) in cement mortar 1:4 (1 cement : 4 Coarse sand) in one or more brick thickness and in any shape in foundation and plinth for valve pits, drains, circular/square maholes, wing walls, etc. including providing recesses, openings, etc. including curing, finishing the joints flush below ground level and raking out joints in plinth with all labour and material, etc. complete as per drawings, specifications and direction of Engineer-in-Charge.For following Brick Class. 1666 All materials including cement supplied by the Contractor and Following Brick Class 1667 Brick Class 5 1668 Providing 13mm thick average cement plaster in cement mortar 1:3 (1 cement: 3 sand) on brick walls/stone masonry/pitching or on concrete surfaces for manholes, valves pits, culverts, wing walls, etc. including cleaning and preparation of the surface, scaffolding, curing etc. for all depths and heights complete as per drawings specifications and direction of Engineer-in-Charge. 1669 All materials including cement supplied by the Contractor. 1670 MISCELLANEOUS ITEMS 1671 Supply and installation of combined safety shower and eyewash units as per spec. no.6-66-0038, including providing and fixing of necessary foundation bolts in foundations/ pavement etc. complete. Each safety shower shall have proper sign board with florescent letters showing their location, all complete as per specification, drawings and direction of Engineer-in-charge. 1672 Supplying & Laying 60mm thick interlocking Paver Blocks for footpaths and any other place etc. including providing 40 mm thick sand filling below Paver Blocks including compaction of sand layer, filling the joints by dry sand, providing precast kerb stone of PCC M 30 at edges and at every 6.0m across the foot path, including preparation of compacted base/ sub base etc. all complete as per drawing, standard, specificationand directions of Engineer-in-Charge. (All material including cement supplied by contractor, paver blocks shall confirm to category A as per IRC SP63. Colour and shape of paver block shall be as per Owner requirement.). 1673 Modification Works 1674 MODIFICATION AND EXTRA WORKS ( IF ANY ) Cuting,bevelling,fitup,welding of different sizes of CS piping of all thicknesses in shop ,in position, on ground and at all elevations, transportation of pipes,fittings,flanges etc. from owners storage point to work site/workshop,making necessary scaffolding,consumables,machinery,tools,tackles,labour and supervision including attending to repairs for completing the work as per instructions of Engineer -in -charge 1675 Flame cutting CS piping 1676 Beveling CS piping 1677 Fit-up and welding CS piping 1678 Removal and re-installation of fire hydrant 1679 Removal and re-installation of firefighting equipment (Fire Hydrant), including isolation valve and transporting the equipment, valve, flanges from removal point to work spot, and fixing of nuts, bolts, washers, gaskets as needed for fixing the equipment with matching flange etc. complete, including plugging the existing branch with blind flange as per specification, drawings and directions of Engineer-in-charge. (Pipes and fittings shall be supplied by owner as free issue material) 1680 NDT Testing 1681 RADIOGRAPHY :- Performance of radiographic inspection on piping of all types & thicknesses including providing or hiring of all necessary equipment and whatever else even though not expressly mentioned but required to perform the work as per specificationsand instructions of Engineer-in-Charge. Radiographs shall be submitted to the Engineer-in-charge. (Repeat Radiography due to defective radiograph on repaired joints due to Contractors fault and for additional radiography necessitated due to poor performance of contractors welders shall be done at contractors cost) Note: Unit for radiography quantity is Nos of circumferential weld joints. 1682 FOR JOINTS THK. <= 8MM (FOR CS OTHER THAN CLASS lV OF SPEC FOR NDT REQUIREMENT OF PIPING) 1683 Nominal Dia. 3 Inch 1684 Nominal Dia. 4 Inch 1685 Nominal Dia. 6 Inch 1686 Nominal Dia. 8 Inch 1687 Nominal Dia. 12 Inch 1688 Micrograding 1689 Micrograding of the area as directed to proper level, grade and camber including earthwork in excavation in all types of soils up to a maximum depth of 150mm, removing shrubs, vegetation bushes, grass etc., earth work in filling with select material from available earlier excavated soil and borrow earth (in case the select material from excavated soil is short for filling, filling shall be done with borrow earth, supply & transportation of borrow earth shall be paid separately under relevant item) up to a maximum compacted thickness of 150mm by spreading in layers not exceeding200mm loose thickness, watering, ramming & compacting with road roller or hand roller including hand ramming where road rollers or hand rollers are not accessible to give at least 90% of max. laboratory dry density as per IS:2720 part VII, including transportation, leveling, dressing, disposal of surplus earth, debris, etc. all complete as per specifications, drawings and direction of Engineer-in-charge. (Disposal areas shall be anywhere within the plant complex limit as identified by Engineer-in-Charge.) 1690 Dismantling works 1691 Removal of existing A/G piping 1692 Removal of existing A/G piping of all thickness including cutting, unbolting of flanged joints / cutting of pipe lines wherever required, removing supports, all fittings, flanges etc., cutting of pipes in appropriate lengths for transporting purpose, transporting all material to owners storage point within the complex as designated by Owner including stacking of material and disposing of waste etc. as instructed by Engineer - in - charge. 1693 For C.S. A/G Pipe of following nominal dia. 1694 Nominal Dia 8 Inch 1695 Nominal Dia 4 Inch 1696 Nominal Dia 6 Inch 1697 Nominal Dia 12 Inch 1698 Removal of existing U/G piping 1699 Removal of existing U/G piping including excavation in all types of soils except soft rock and hard rock, including supply of any additional material required so as to expose the pipes for removal / dismantling, taking all safety precautions, supporting existing U/G services, dewatering of surface / sub-surface water as required to facilitate dismantling of pipes, cutting of pipes in appropriate lengths for transporting purpose, removal of soft material from bottom of trench and compacting, backfilling with available selected earth including re-excavating the deposited soil excavated earlier, breaking clods, laying in thickness not exceeding 15cms, watering rolling and ramming by manual methods / mechanical Compactors to achieve 90% laboratory maximum dry density as per IS:2720 Part VII or 85% relative density as per IS:2720 part XIV as applicable, stacking of serviceable / unserviceable material, transporting and stacking of all piping material to Owners storage point, disposal of unserviceable material anywhere inside the complex etc. , all complete as per directions of Engineer-in-Charge. 1700 For CS Piping dismantling, Thickness <=10 mm , For following Nominal Sizes 1701 NB 2 inch - 6 inch 1702 NB 8 inch - 14 inch 1703 Portable/ trolley mounted Extinguishers 1704 Supply and installation of portable DCP ( Dry Chemical Powder Type) extinguisher including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification and directions of Engineer-in-Charge. 1705 Capacity in Kg 10 1706 Supply and installation of portable CO2 extinguishers including transporting to worksite, fixing in position including all accessories and all labor and material etc. complete as per drawings, specification, data sheet and directions of Engineer-in-Charge. 1707 Capacity in Kg 4.5 1708 Capacity in Kg 2 1709 Painting of A/G pipes and valves 1710 Supply of paints and primers, preparation of surfaces and application of primer and finish paints, identification (Line numbering), lettering, colour bands, colour coding etc. as specified including rubdown and touch up of shop primer wherever required, providing scaffolding for all heights, labour, material, tools and tackles, consumables supervision etc. to complete the work in all respects as per painting specification, drawings and direction of Engineer-in-Charge for all types of un insulated piping and insulated piping as specified including all pipes, fittings, flanges, supports, valves etc. Surface preparation by blast cleaning and application of first coat of primer (inorganic zinc silicate, F9) shall be done in fabrication yard prior to erection. The identification marks of the piping and joints shall be noted before blasting and the same shall be transferred on primed surface with Polyurethane paint (F2) or as per the instructions of Engineer-in-Charge. Notes: 1. All joints (fabrication as well as erection joints) shall be left unpainted till hydro testing. 2. No extra payment shall be made for identification (line numbering etc.) of insulated and uninsulated lines. 1711 Painting of uninsulated surfaces for Industrial marine environment as per painting specification for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following pipe sizes 1712 Nominal Dia. 12 Inch 1713 Nominal Dia. 4 Inch 1714 Nominal Dia. 3 Inch 1715 Nominal Dia. 6 Inch 1716 Nominal Dia. 8 Inch 1717 Painting of uninsulated surfaces for Industrial marine environment as per painting specification for CS piping for design temp group: -14 to 80 (Deg C) including surface preparation. For following valve sizes 1718 Dia. Of Valve 12 Inch 1719 Dia. Of Valve 4 Inch 1720 Dia. Of Valve 6 Inch 1721 Dia. Of Valve 3 Inch 1722 Dia. Of Valve 8 Inch 1723 Fabrication and Erection of piping (underground) 1724 FABRICATION AND ERECTION OF PIPING (SPEC. NO.6-65-0030 and 6-44-0012) : Laying and joining of Carbon Steel pipes and specials underground including transportation of all material from Owners storage point to worksite, earthwork in excavation in all types of soilEXCLUDING SOFT ROCK AND HARD ROCK for pipe trenches, saddles, etc. including dewatering of rain and /or sub soil water, shoring & strutting if required, dressing of sides, levelining, grading & ramming of bottom of trench, cutting of pipes if required, fitup, edge preparation, providing corrosion protection tape coating as per specification, on pipes and specials, laying the pipes in trenches to required alignment and levels, welding the same after laying, installation of flanges, blind flanges, tapping for pressure gauges, temperature gauges and all other online instruments and fittings like elbows, reducers, tees, flanges, spectacle blinds and spacer blinds etc., as per piping material specification, fixing of nuts, bolts, gaskets and washers, welding, corrosion protection coating of field joints, cutting of road wherever required and making good the same, testing for the corrosion protection coating as per specification, cleaning and flushing by water/ compressed air, hydrostatic/ pnuematic testing of the system, flushing, backfilling the trenches with select material from available excavated soil including re-excavating the deposited soil excavated earlier, breaking clods and laying in layers of 15 cm compacted thickness, watering, compacting with mechanical means like vibro rammers etc. to 90% of dry density as per IS:2720 Part-VII, disposal of surplus earth/ unserviceable material to demarcated area anywhere within the complex limit etc. complete as per drawings, specifications and instructions of Engineer-in-Charge including connecting the pipes to manhole, including return of all unused / scrap pipe to owners storage point (Pipes and fittings shall be supplied by owner as free issuematerial.) (Depth of excavation for pipe trench shall be upto 3.0m) 1725 Carbon SteelPiping (Non IBR), Thickness <=10 mm 1726 Fabrication, For the following nominal sizes 1727 NB 2 inch - 6 inch 1728 NB 8 inch - 14 inch 1729 Erection including corrosion protection coating, for Water System (Pressure Piping), Forfollowing Nominal Sizes 1730 NB 2 inch - 6 inch 1731 NB 8 inch - 14 inch 1732 Erection including corrosion protection coating, for Waste Water Collection System (Gravity Flow), for following Nominal Sizes 1733 NB 2 inch - 6 inch 1734 Fabrication and Erection of piping (Above ground) 1735 PIPING (ABOVE GROUND): Transportation of all piping items from owners storage point to work site/workshop, fabrication including cutting, edge preparation (including grinding the edges of pipe, fittings, flanges etc. to match with the mating edges of uneven/different thickness wherever required), fitup, bending, preheating wherever required, welding, threading, and laying of pipes of all type and thickness over pipe sleepers, overhead on racks and at all elevations, connectingwith equipment nozzles, strainers, orifice assemblies, tapping for pressure gauges etc., fixing of gaskets, bolts, nuts including application of torque wherever required and all other inline instruments and fitting like elbows, reducers, tees, vents, drains, SW valves upto 1.5 NB, alignment, cleaning & flushing by water/compressed air, hydrostatic, pneumatic, vacuum, spark testing and any other type of testing as specified,draining, drying by compressed air completing all such works in all respects (including preparation of isometrics as mentioned in the scope of work for the job)as per drawings, specifications and instruction of Engineer-in-charge. (Pipes and fittings shall be supplied by owner as free issue material) 1736 Carbon SteelPiping (Non IBR), Thickness <=10 mm 1737 Fabrication, For the following nominal sizes 1738 NB 2 inch - 6 inch 1739 NB 8 inch -14 inch 1740 Erection , for Water System (Pressure Piping), Forfollowing Nominal Sizes 1741 NB 2 inch - 6 inch 1742 NB 8 inch -14 inch 1743 Supply of Carbon steel pipes 1744 Supply of Carbon steel pipes as per Piping material class including transportation of all material to owners store complete as per drawings, specifications and instruction of Engineer-in-Charge. For following nominal size and piping material class. 1745 Nominal Dia. 12 InchPiping Material Class A33A 1746 Nominal Dia. 4 InchPiping Material Class A33A 1747 Nominal Dia. 8 InchPiping Material Class A33A 1748 Nominal Dia. 6 InchPiping Material Class A33A 1749 Nominal Dia. 3 InchPiping Material Class A91A 1750 Supply and installation of valve assembly, flange assembly etc. 1751 Supply and installation of valve assembly consisting of valve, 2 no. flanges, 2 no. gaskets and 2 sets of nuts & bolts per valve assembly, erection of valve in position including fixing of nuts, bolts, gaskets, washers etc. complete as per drawings, specifications and directions of Engineer-in-Charge. 1752 Gate valve assembly for following nominal sizes and piping material class 1753 Dia. 12 InchPMS A33A 1754 Dia. 8 InchPMS A33A 1755 Dia. 6 InchPMS A33A 1756 Dia. 3 InchPMS A91A 1757 Supply and installation of valve assembly consisting of valve, 1 no. flange, 2 no. gaskets and 2 sets of nuts & bolts per valve assembly, erection of valve in position including fixing of nuts, bolts, gaskets, washers etc. complete as per drawings, specifications and directions of Engineer-in-Charge. 1758 Dia. 4 InchPMS A33A 1759 Dia. 6 InchPMS A33A 1760 Globe valve assembly for following nominal sizes and piping material class 1761 Dia. 3 InchPMS A91A 1762 Supplying the flange assembly conforming to piping material specifications and delivering the same to owners stores/ work spot etc. Flange assembly shall consist of 2 no. flanges along with one no. matching gasket and one set of matching nuts &, bolts. All complete as per specifications and directions of Engineer-in-Charge. For following nominal size and piping material class 1763 Dia. 3 InchPMS A91A 1764 Supply, Fabrication and installation of strainers 1765 Supply, Fabrication and installation of strainers as per drawingsetc. complete as per specifications and directions of Engineer-in-Charge. 1766 T-type strainers for following nominal size and piping material class 1767 Dia. 3 InchPMS A91A 1768 fire fighting equipments 1769 Supply, installation, testing and commissioning of following firefighting equipment as per relevant specifications, data sheet, drawing, including transporting the equipment to worksite, fixing of nuts, bolts, washers, gaskets, welding needed for fixing the equipment with matching flange etc. all complete as per drawings, specifications, standards, data sheet and direction of Engineer-in-Charge. 1770 Double headed landing valve 1771 First Aid hose reel wall mounted type 1772 Hose box cabinet Type-II (Wall mounted type) including all inside accessories, including all civil works, fixing in position with anchor bolts in foundations or wall 1773 Hose box cabinet Type-II (self-supporting type) including all inside accessories, including all civil works, fixing in position with anchor bolts in foundations or wall 1774 Variable flow Water cum foam monitor of 500/750/1000 GPM capacity 1775 Stand Post Type Fire Hydrant without Pumper Connection 1776 Miscellaneous Items 1777 Miscellaneous 1778 Design, engineering, procurement, supply of all materials and equipment, machinery, civil, structural, electrical, mechanical, instrumentation, piping works including painting works, tape coating on U/G piping, commissioning spares and tools/tackles as per scope of work, specifications, drawings, data sheets etc. and as per directions of Engineer-in-Charge for Auto Actuated High Velocity Spray System on Transformers including taking approval of the complete system from agency appointed by insurance company /Client. Unloading at site, handling, transportation from store to work site, storage at site, fabrication, construction, assembly at site, supply of all labour, installation, field works including civil structural, electrical, mechanical, instrumentation, piping works and supports, testing, pre-commissioning, painting, commissioning and any other activity required to complete the works in all respects including performance guarantee run, handing over to client as per enclosed scope of work, drawings, specifications, instructions to vendors, data sheets and as per directions of Engineer in- Charge. Supply of mandatory spares as per specifications enclosed list/instructions to vendor as per scope of work and specification, drawings and documents as per attached vendor data requirement for all supplies and services etc. complete.
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 6
11.
Agriculture #9462571 Technical Bid
Tender For Competitive E-Bidding For Sale Of Scrap From Various Co-Operative Sugar Mills And Distilleries In Uttar Pradesh In Year 2024-25 , Scrap , Anoopshahar (M.S. Scrap) , Bagpat (M.S. Scrap) , Morna (M.S. Scrap) , Nanauta (M.S. Scrap) , Ramala (M.S. Scrap) , Sarsawa (M.S. Scrap) , Badaun (M.S. Scrap) , Belrayan (M.S. Scrap) , Rudra Bilaspur (M.S. Scrap) , Bisalpur (M.S. Scrap) , Gajraula (M.S. Scrap) , Kaimganj (M.S. Scrap) , Puranpur (M.S. Scrap) , Sampurnanagar (M.S. Scrap) , Semikhera (M.S. Scrap) , Snehroad (M.S. Scrap) , Tilhar (M.S. Scrap) , Powayan (M.S. Scrap) , Ghosi (M.S. Scrap) , Mahmudabad (M.S. Scrap) , Nanpara (M.S. Scrap) , Sultanpur (M.S. Scrap) , Sathiaon (M.S. Scrap) , Snehroad (C.I. Scrap) , Tilhar (C.I. Scrap) , Ghosi (C.I. Scrap) , Mahmudabad (C.I. Scrap) , Belrayan (C.S. Scrap) , Ghosi (C.S. Scrap) , Bagpat (Old Bearing) , Morna (Old Bearing) , Nanauta (Old Bearing) , Ramala (Old Bearing) , Sarsawa (Old Bearing) , Belrayan (Old Bearing) , Rudra Bilaspur (Old Bearing) , Bisalpur (Old Bearing) , Gajraula (Old Bearing) , Kaimganj (Old Bearing) , Puranpur (Old Bearing) , Sampurnanagar (Old Bearing) , Semikhera (Old Bearing) , Snehroad (Old Bearing) , Tilhar (Old Bearing) , Ghosi (Old Bearing) , Mahmudabad (Old Bearing) , Nanpara (Old Bearing) , Sultanpur (Old Bearing) , Sathiaon (Old Bearing) , Anoopshahr (Brass Scrap) , Nanauta (Brass Scrap) , Sarsawa (Brass Scrap) , Badaun (Brass Scrap) , Puranpur (Brass Scrap) , Anoopshar (Nickel Screen Scrap) , Bagpat (Nickel Screen Scrap) , Morna(Nickel Screen Scrap) , Nanauta (Nickel Screen Scrap) , Ramala (Nickel Screen Scrap) , Sarsawa (Nickel Screen Scrap) , Badaun (Nickel Screen Scrap) , Belrayan (Nickel Screen Scrap) , Bisalpur (Nickel Screen Scrap) , Gajraula (Nickel Screen Scrap) , Puranpur (Nickel Screen Scrap) , Sampurnanagar (Nickel Screen Scrap) , Tilhar (Nickel Screen Scrap) , Powayan (Nickel Screen Scrap) , Ghosi (Nickel Screen Scrap) , Sultanpur (Nickel Screen Scrap) , Sathiaon (Nickel Screen Scrap)
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 2
Uttar Pradesh View Result →
12.
Agriculture #9449902 Technical Bid
tender for COMPETITIVE e-Bidding FOR SALE OF SCRAP FROM VARIOUS CO-OPERATIVE SUGAR MILLS & DISTILLERIES IN UTTAR PRADESH IN YEAR 2023-24 Competitive E-Bidding For Sale Of Scrap From Various Co-Operative Sugar Mills And Distilleries In Uttar Pradesh In Year 2024-25 , Scrap , Anoopshahar (M.S. Scrap) , Bagpat (M.S. Scrap) , Morna (M.S. Scrap) , Nanauta (M.S. Scrap) , Ramala (M.S. Scrap) , Sarsawa (M.S. Scrap) , Badaun (M.S. Scrap) , Belrayan (M.S. Scrap) , Rudra Bilaspur (M.S. Scrap) , Bisalpur (M.S. Scrap) , Kaimganj (M.S. Scrap) , Sampurnanagar (M.S. Scrap) , Semikhera (M.S. Scrap) , Snehroad (M.S. Scrap) , Tilhar (M.S. Scrap) , Nanpara (M.S. Scrap) , Sathiaon (M.S. Scrap) , Nanauta Distillery (M.S. Scrap) , Kaimganj Distillery (M.S. Scrap) , Sampurnanagar Distillery (M.S. Scrap) , Snehroad Distillery (M.S. Scrap) , Snehroad (C.I. Scrap) , Tilhar (C.I. Scrap) , Kaimganj Distillery (C.I. Scrap) , Anoopshahr (C.S. Scrap) , Belrayan (C.S. Scrap) , Kaimganj Distillery (C.S. Scrap) , Anoopshahr (Old Bearing) , Bagpat (Old Bearing) , Morna (Old Bearing) , Nanauta (Old Bearing) , Ramala (Old Bearing) , Sarsawa (Old Bearing) , Belrayan (Old Bearing) , Bisalpur (Old Bearing) , Gajraula (Old Bearing) , Kaimganj (Old Bearing) , Puranpur (Old Bearing) , Sampurnanagar (Old Bearing) , Semikhera (Old Bearing) , Snehroad (Old Bearing) , Tilhar (Old Bearing) , Powayan (Old Bearing) , Mahmudabad (Old Bearing) , Nanpara (Old Bearing) , Sultanpur (Old Bearing) , Sathiaon (Old Bearing) , Kaimganj Distillery (Old Bearing) , Snehroad Distillery (Old Bearing) , Sarsawa (Brass Scrap) , Semikhera (Brass Scrap) , Anoopshar (Nickel Screen Scrap) , Bagpat (Nickel Screen Scrap) , Morna(Nickel Screen Scrap) , Nanauta (Nickel Screen Scrap) , Ramala (Nickel Screen Scrap) , Sarsawa (Nickel Screen Scrap) , Badaun (Nickel Screen Scrap) , Belrayan (Nickel Screen Scrap) , Bisalpur (Nickel Screen Scrap) , Gajraula (Nickel Screen Scrap) , Kaimganj (Nickel Screen Scrap) , Sampurnanagar (Nickel Screen Scrap) , Tilhar (Nickel Screen Scrap) , Powayan (Nickel Screen Scrap) , Sultanpur (Nickel Screen Scrap) , Sathiaon (Nickel Screen Scrap)
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 10
Uttar Pradesh View Result →
13.
Agriculture #9438381 Technical Bid
Competitive E-Bidding For Sale Of Scrap From Various Co-Operative Sugar Mills And Distilleries In Uttar Pradesh In Year 2023-24 , Scrap , Anoopshahar (M.S. Scrap) , Bagpat (M.S. Scrap) , Nanauta (M.S. Scrap) , Ramala (M.S. Scrap) , Sarsawa (M.S. Scrap) , Badaun (M.S. Scrap) , Belrayan (M.S. Scrap) , Bisalpur (M.S. Scrap) , Gajraula (M.S. Scrap) , Kaimganj (M.S. Scrap) , Sampurnanagar (M.S. Scrap) , Semikhera (M.S. Scrap) , Snehroad (M.S. Scrap) , Tilhar (M.S. Scrap) , Powayan (M.S. Scrap) , Mahmudabad (M.S. Scrap) , Nanpara (M.S. Scrap) , Sultanpur (M.S. Scrap) , Sathiaon (M.S. Scrap) , Sampurnanagar Distillery (M.S. Scrap) , Majhola Distillery (M.S. Scrap) , Kaimganj (C.I. Scrap) , Snehroad (C.I. Scrap) , Powayan (C.I. Scrap) , Anoopshahr (C.S. Scrap) , Belrayan (C.S. Scrap) , Powayan (C.S. Scrap) , Anoopshahr (Old Bearing) , Bagpat (Old Bearing) , Morna (Old Bearing) , Nanauta (Old Bearing) , Ramala (Old Bearing) , Sarsawa (Old Bearing) , Badaun (Old Bearing) , Belrayan (Old Bearing) , Bisalpur (Old Bearing) , Gajraula (Old Bearing) , Puranpur (Old Bearing) , Sampurnanagar (Old Bearing) , Semikhera (Old Bearing) , Snehroad (Old Bearing) , Tilhar (Old Bearing) , Powayan (Old Bearing) , Ghosi (Old Bearing) , Mahmudabad (Old Bearing) , Nanpara (Old Bearing) , Sathiaon (Old Bearing) , Sarsawa (Brass Scrap) , Rudra Bilaspur (Brass Scrap) , Powayan (Brass Scrap) , Anoopshar (Nickel Screen Scrap) , Bagpat (Nickel Screen Scrap) , Morna(Nickel Screen Scrap) , Nanauta (Nickel Screen Scrap) , Ramala (Nickel Screen Scrap) , Sarsawa (Nickel Screen Scrap) , Badaun (Nickel Screen Scrap) , Belrayan (Nickel Screen Scrap) , Bisalpur (Nickel Screen Scrap) , Gajraula (Nickel Screen Scrap) , Tilhar (Nickel Screen Scrap) , Powayan (Nickel Screen Scrap) , Ghosi (Nickel Screen Scrap) , Sultanpur (Nickel Screen Scrap) , Sathiaon (Nickel Screen Scrap) , Sathiaon (Old Oil Of Transformer) , Rudra Bilaspur (S.S. Scrap)
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 11
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 7
Uttar Pradesh View Result →
15.
Defence #9379633 Technical Bid
Tender For Renovation /Up-Gradation Of So Mess At Shq Bsf Gurdaspur; 1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 2 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand includingfinishing the top smooth. 3 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade. Area of slab over 0.50 sqm 4 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work 5 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 6 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood andwell matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 7 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 8 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters.With ISI marked stainless steel butt hinges of required size. Kiln seasoned and chemically treated hollock wood 9 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding 10 Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. 11 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm 12 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm 13 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm 14 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm 15 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 16 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper 17 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge. Extruded section profile size 48x40 mm 18 Providing and fixing to existing door frames.24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall Code No. Description Unit Rate SUB HEAD : 9 - WOOD & PVC WORK 159 thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). 19 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 20 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 21 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides 22 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 4.0 mm thick glass panes. 23 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick 24 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 25 Providing and laying Ceramic glazed mat finished floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 26 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 27 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing withgrey cement slurry @ 3.3kg/sqm including grouting the joint with white cement&matching pigmentsetc.complete.Size of Tile 600x600 mm 28 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase 29 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 30 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter 31 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm 32 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) 33 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats 34 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade : Two or more coats on new work 35 Removing dry or oil bound distemper,water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 36 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 37 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 38 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) 39 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 40 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm 41 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge. 42 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 43 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm 44 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 45 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 46 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 47 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 48 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia 49 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 50 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. 51 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms 52 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes 53 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc20 mm nominal outer dia Pipes 54 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal outer dia Pipes 55 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work32 mm nominal outer dia Pipes 56 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore 57 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore 58 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 59 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 25 mm nominal bore 60 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): 32 mm nominal bore 61 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 62 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore 63 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 64 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 65 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore 66 Providing and fixing PTMT grating of approved quality and colour.Circular type. 100 mm nominal dia 67 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :100 mm diameter 68 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement: 1 fine sand) including testing of joints etc. complete :150 mm diameter 69 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 150 mm diameter S.W. pipe 70 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :100 mm diameter S.W. pipe 71 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 72 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 73 Extra for depth for manholes : Size 90x80 cmWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 74 Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. L D- 2.5. Rectangular shape 600x450 mm internal dimensions 75 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within 50 m lead as per direction of Engineer- charge : Rectangular manhole 90x80 cm and 45 cm deep 76 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 77 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) 78 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 79 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. 80 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform 81 Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately). 82 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :15 mm wide and 15 mm deep groove 83 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 84 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittingsshall be paid for separately)Powder coated aluminium (minimumthickness of powder coating 50 micron) 85 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 86 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) 87 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness 88 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 89 add GST 18% in place of 12% on DSR 2021 hence factor 0.0633 on total amount( Srl No. 01 to 88) 90 Add cost index@(-1.90%) on DSR 2021( Srl No. 01 to 88) 91 Providing and fixing Stainless steelEnglish letters (Stainless steel Grade- 304) per inch vertical height of approved pattern with necessary screws etc complete on existing wall/ granite/ iron plate including nessary fixtures etc complete as per direction of Engineer-In-Charge. 92 Providing and fixing 4 mm thick ACP panneling ofapproved colour/shade with aluminium tube (size 50mm x 25 mm)framing including necessary fixtures- padding, SS hardware, Alstone silicon etc complete as per direction of engineer in charge. 93 Providing and fixing ACP (Aluminium Composite Panel ) of approved quality and colour havingthickness 4.00 mm with necessary fixing arrangement etc complete as per direction of engineer in charge 94 Providing and applying white cement based putty of average thickness 0.50 mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(one coat) 95 Providing and fixing white vitreous china large flat back front urinal basin of380x398x600 mm sizes of approved quality with required fittins etc complete as per direction of engineer in charge. 96 Providing and fixing CP brass urinal push cock 15 mm nominal bore of approved quality etc complete as per direction of engineer in charge. 97 Providing and fixing C.P. brass spreader including C.P. connecting pipe Range of one lipped urinals of approved quality etc complete as per direction of engineer in charge. 98 Dismantling and credit to Govt. By dismantling and taking away the doors, windows and clerestory window shutters( steel or wood) of area 3 sq. Metres and below including removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. (dismantleddoors, windows and clerestory window shutters( steel or wood) and other dismantled fittings shall be the property of the contractor). 99 Dismantling and credit to Govt. By dismantling and taking away the Old PVC water storage tankincluding removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. 100 Dismantling and credit to Govt. By dismantling and taking away the old GI pipes 15 mmincluding removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. (dismantledGI pipes and other dismantled fittings shall be the property of the contractor). 101 Dismantling and credit to Govt. By dismantling and taking away the old GI pipes 20 including removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. (dismantledGI pipes and other dismantled fittings shall be the property of the contractor). 102 Dismantling and credit to Govt. By dismantling and taking away the old PTMT stock cock/float valve/bib cock/shower /pillar cock including removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. 103 Dismantling and credit to Govt. By dismantling and taking away the old cast iron pipe all size including removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. (dismantled Iron scrap and other dismantled fittings shall be the property of the contractor) 104 Dismantling and credit to Govt. By dismantling and taking away the old 10 ltrs capacity low level cistern PVC including removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. 105 Dismantling and credit to Govt. By dismantling and taking away the Iron scrap(frame,grill,railing etc) including removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. (dismantled Iron scrap and other dismantled fittings shall be the property of the contractor). 106 Dismantling and credit to Govt. By dismantling and taking away the old brass bib cock/stop cock/pillar cock/mixture of 15 mm dia including removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. (dismantled Iron scrap and other dismantled fittings shall be the property of the contractor). 107 Dismantling and credit to Govt. By dismantling and taking away the old PVC Door shutter with frame including removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. 108 Dismantling and credit to Govt. By dismantling and taking away the old CI floor trape/fitting 100/75 mmincluding removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site , dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. 109 Dismantling and credit to Govt. By dismantling and taking away the old steel sinkincluding removal of all dismanted material from site of work its credit to contractorcomplete cleaning of site, dosposal of unservicable material, taking out, etc, all complete as per direction of engineer-in-charge. 110 ELECTRICAL WORKS( SCHEDULE) (Srl No. 110to 148 ) 111 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. GROUP-B 112 Wiring for light / power plug with 4 x 4.0 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit along with 2 nos. 4.0 sq mm FRLS PVC insulated Cu conductor single core cable for loop earthing as required. 113 Wiring for light / power plug with 2 x 4 sq mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit along with 1 no 4 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 114 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 115 Supplying and drawing following sizes of FRLS PVC insulated copper condutor, single core cable in the existing surface/ recessed steel/ PVC Conduit as required. 3 x 1.5 sqmm 116 Supplying and drawing following sizes of FRLS PVC insulated copper condutor, single core cable in the existing surface/ recessed steel/ PVC Conduit as required. 3 x 4.0 sqmm 117 Supplying and drawing following sizes of FRLS PVC insulated copper condutor, single core cable in the existing surface/ recessed steel/ PVC Conduit as required. 3x6.0 sqmm 118 Supplying and drawing 4 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required 119 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 120 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.i) 20 mm 121 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.ii) 25 mm 122 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.iii) 50 mm 123 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.i) 5/6 amps switch 124 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.ii) 3 pin 5/6 A socket outlet 125 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.iii) Telephone socket outlet 126 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. iv) T.v. socket outlet 127 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modularswitch, connections etc. as required 128 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). 129 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required 130 Supplying and fixing ding dong call bell / buzzer suitable forsingle phase, 230 V complete as required. 131 Supplying and fixing of following way single pole and neutral, sheet steel MCB distribution board 240 V on surface / in recess complete with tinned copper bus bar, neutral bus bar, earth bar, dinbar,interconnections powder painted including earthing etc as required (But without/MCB/RCCB/ISOLATOR). I) 6 way double door 132 Supplying and fixing of following way single pole and neutral, sheet steel MCB distribution board 240 V on surface / in recess complete with tinned copper bus bar, neutral bus bar, earth bar, dinbar,interconnections powder painted including earthing etc as required (But without/MCB/RCCB/ISOLATOR). II) 8 way double door 133 Supplying and fixing of following way single pole and neutral, sheet steel MCB distribution board 240 V on surface / in recess complete with tinned copper bus bar, neutral bus bar, earth bar, dinbar,interconnections powder painted including earthing etc as required (But without/MCB/RCCB/ISOLATOR). III) 12 way double door 134 Supplying and fixing 5 A to 32 A rating 240/415 volts,C curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. i) Single pole 135 Supplying and fixing 5 A to 32 A rating 240/415 volts,C curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. ii) Double pole MCB 136 Earthingwith G.I. earth pipe4.5mtr long x 40mm dia including accessories and providing masonary enclosure with cover platehaving locking arrangement and watering pipe etc. withcharcoalor coke and salt complete as required. 137 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. 138 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required 139 Add GST due to change 12 to 18 % (MF = 0.0633) on DSRItem ( Srl No. 111 to 138) 140 Providing and installation, testing and commissioning of MODULAR ceiling fan Regulator Rotary steptype and dismantling the existing complete etc. as required.Havells or equivalent make Havells/ Anchor/gold medal 141 Supplying and fixing PVC batten/ angle holder Make - Havells/anchor/bajaj etc alongwith S/F 9 watt LED Bulb (B22) including connections etc. as required. Make - Havells/CG/Bajaj etc. 142 Providing and fixing of 10 W LED battern for mirror light new e-Lite LeD triyca batten with options of 3000K , all in one fixture Havella make with wire complete with connection, testing commissioning etc as required and similiar Make of CG/Bajaj /Havells-LHEXBYPNIN1W010/Philips 143 Supplying and fixing decorative, wall mounting Fixture, champagne gold finish finish fixture made up of high grade engineering plastic material complete including S/F 1 x 9 watt LED BULB and making connections etc. as required of make Havells (Model - Stylo; LHFOECE1TZ1O014)/Philips / Bajaj / Crompton or as per decesion of Engg. incharge. 144 Providind and fixing of Exhaust fan 225/230 mm (Metal body) with louvers, fasteners including connection, testing and commissioning etc as reqd. cat no. Drift Air HS 9 (Crompton) or Drift Air DSP(Havells) or equivalent model & specification of ORIENT /BAJAJ MAKE 145 Providing and fixing of 20 Watt, 6500K LED batten lighting fixture with extruded polycarbonate directly on ceiling/ wall, including connection with connector, testing and dismantling the existing complete etc. as required. Cat no LHEXACP7IN1W020 Havells(E-Lite LED Pride Plus Neo) make or equivalent model & specification in philips/Crompton-LDLSR-20-CDL/Bajaj 146 Providing and laying of 3.5 C x 35 sqmmone number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make- Havells/Polycab/KEI 147 Providing and laying of 3.5 x 35 sqmmone number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Make- Havells/KEI/Polycab 148 Providing and laying of 3.5 C x 35 sqmmone number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct/open laying as required. Make- Polycab/Havells/KEI
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 3
16.
Agriculture #9285793 Technical Bid
Competitive E-Bidding For Sale Of Scrap From Various Co-Operative Sugar Mills And Distilleries In Uttar Pradesh In Year 2023-24 , Scrap , Ghosi ( M.S. Scrap ) , Nanpara ( M.S. Scrap ) , Sampurnanagar ( M.S. Scrap ) , Semikhera ( M.S. Scrap ) , Bisalpur ( M.S. Scrap ) , Anoopshahar ( M.S. Scrap ) , Sultanpur ( M.S. Scrap ) , Puranpur ( M.S. Scrap ) , Nanauta ( M.S. Scrap ) , Snehroad ( M.S. Scrap ) , Belraya ( M.S. Scrap ) , Morna ( M.S. Scrap ) , Ramala ( M.S. Scrap ) , Sarsawa ( M.S. Scrap ) , Bagpat ( M.S. Scrap ) , Satha ( M.S. Scrap ) , Badaun ( M.S. Scrap ) , Tilhar ( M.S. Scrap ) , Rudrabilaspur ( M.S. Scrap ) , Powaya ( M.S. Scrap ) , Kaimganj ( M.S. Scrap ) , Sathiaon ( M.S. Scrap ) , Ghosi Distillery ( M.S. Scrap ) , Sampurnanagar Distillery ( M.S. Scrap ) , Nanauta Distillery ( M.S. Scrap ) , Sathiaon Distillery ( M.S. Scrap ) , Ghosi ( C.I. Scrap ) , Semikhera ( C.I. Scrap ) , Sultanpur ( C.I. Scrap ) , Snehroad ( C.I. Scrap ) , Satha ( C.I. Scrap ) , Powayan ( C.I. Scrap ) , Kaiamganj Distillery ( C.I. Scrap ) , Bisalpur ( C.S. Scrap ) , Anoopshahar ( C.S. Scrap ) , Ghosi ( Old Bearing ) , Nanpara ( Old Bearing ) , Sampurnanagar ( Old Bearing ) , Semikhera ( Old Bearing ) , Bisalpur ( Old Bearing ) , Anoopshahr ( Old Bearing ) , Sultanpur ( Old Bearing ) , Puranpur ( Old Bearing ) , Belraya ( Old Bearing ) , Morna ( Old Bearing ) , Sarsawa ( Old Bearing ) , Bagpat ( Old Bearing ) , Satha ( Old Bearing ) , Badaun ( Old Bearing ) , Tilhar ( Old Bearing ) , Rudra Bilaspur ( Old Bearing ) , Kaimganj ( Old Bearing ) , Gajraula ( Old Bearing ) , Ghosi ( Nickel Screen Scrap ) , Semikhera ( Nickel Screen Scrap ) , Anoopshar ( Nickel Screen Scrap ) , Sultanpur ( Nickel Screen Scrap ) , Puranpur ( Nickel Screen Scrap ) , Belrayan ( Nickel Screen Scrap ) , Sarsawa ( Nickel Screen Scrap ) , Bagpat ( Nickel Screen Scrap ) , Badaun ( Nickel Screen Scrap )
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 8
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : Ref. Document
Cooperative No of Bidders 6
18.
Defence #9131000 AOC
Tender For Comprehensive Maintenance Including Periodical Services To 225 Asc (Sup) Under Ge (C) Kolkata; 1.00 Demolition Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc, but excluding Ashlar Facings, dressed Stone Work and Pre-cast Concrete Articles of any descriptions, complete all as specified and as directed. 2.00 Demolition of cement concrete (Un-reinforced) in ground floor and paving nexc 15cm thick above or below GL complete all as specified and directed 3.00 Taking down of shutters of any description nexc 1.0 Sqm each complete all as specified and directed 4.00 Taking down shutters of any description exc. 1.00 Sqm but n.exc 2 Sqm each and removing from site or to store as directed by Engineer in charge. 5.00 Taking down chowkhats or frames with shutters (without taking off shutter from frames) of any sizes nexc 1.5 Sqm complete all as specified and directed. 6.00 Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm and n.exc 4 Sqm each complete all as specified and directed. 7.00 Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debris/ rubbish, etc., complete all as specified and as directed. 8.00 Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), and removing rubbish off the Premises, complete all as specified and as directed. 9.00 Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in mortar complete all as specified and directed. 10.00 Dismantling wrought iron or mild steel work viz steel window, ventilator, guard bars etc of any description not otherwise provided for complete all as specified and directed. 11.00 Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed. 12.00 Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, in Unframed Work, complete all as specified and as directed. 13.00 Dismantling Timber Fillets, Rails, Posts, Rafters, Purlings, etc., under 40 Sqcm in Section, in any Position, as in unframed Work, complete all as specified and as directed. 14.00 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. 15.00 M&L Plain Cement Concrete type C-1, (1:3:6) (40mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. 16.00 M&L Brick work with fly ash bricks designation 75 (kgf/cm2) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. 17.00 M&L Brick Work pulverizes fly ash bricks ,Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed. 18.00 Cutting chase, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of laddings, steps, cills, sushades, shelves, lintels etc and cutting chase for concealed water tubing or concealed coduit wiring etc and making good cutting grith n exc 10 cm girth on brick walls complete all as specified and directed. 19.00 M&L Second Class Hardwood in Scantlings wrought Timber Framed and fixed complete all as specified and as directed. 20.00 M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section wrought, secured with Nails, cross sectional area exc 6.0 Sqcm but not exc. 13.0 Sqcm, complete all as specified and as directed. 21.00 M&L Second Class Hardwood Plain Fillets sqaure, rectangular or triangular in section Wrought, secured with Nails, cross sectional area exc13.0 Sqcm but not exc. 25.0 Sqcm, complete all as specified and as directed. 22.00 S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. 23.00 S&F Plain Colour Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed. 24.00 S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed. 25.00 S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5 mm thick PVC sheet fillet of width 35mm for wall Paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing including taking down old unserviceable PVC wall lining complete all as specified and as directed. 26.00 S&F Second Class Hardwood Plain, Solid, Straight Chowkats and Frames, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue, Pinned at Joints, complete all as specified and as directed. 27.00 S&F for 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed. 28.00 S&F for 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, chamfered or roun-ded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as specified in SSR Part-I 2009.complete all as specified and directed. 29.00 M&L Second Class Hardwood 35mm thick Plain Framed Panelled Door Shutter (any Number of Panels) with Panel of 12mm thick BWP Commercial Ply or Veneered Particle Board with commercial face veneers on both faces and fitted to Wooden Chowkat, complete all as specified and as directed. 30.00 M&L Second Class Hardwood 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed. 31.00 S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to chowkhats complete all as specified and directed. 32.00 S&F Mild Steel Butt Hinges, size of Hinges 75mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed 33.00 S&F Mild Steel Butt Hinges, size of Hinges 100mm, medium weight, Cold Rolled and fixed, complete all as specified and as directed 34.00 S&F Stainless Steel Butt Hinges size of Hinges 100 mm (medium weight) and fixed, complete all as specified and as directed 35.00 S&F Aluminium anodised, barrel tower bolts of extruded section, 100 mm long and fixed with steel screws complete all as specified and directed. 36.00 S&F Aluminium anodised, barrel tower bolts of extruded section, 150 mm long and fixed with steel screws complete all as specified and directed. 37.00 S&F Aluminum alloy Handle 100mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. 38.00 S&F Aluminum alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. 39.00 S&F 250 mm long Aluminum alloy, anodized, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminum alloy and fixed, complete all as specified and as directed. 40.00 S&F Aluminium body(extruded section) door closer hydraulically regulated, designation No 2, universal type suitable for door shutters of 701 to 850 mm in width and weight between 61 to 80 kg and fixed as in repair complete all as specified and as directed. 41.00 S&F Floor door stopper of steel body and overall length of cover plate 150 mm and tongue anodised with hard drawn steel spring as in repair complete all as specified and directed. 42.00 S&F Double action floor spring hydraulically regulated, made up of minimum 1.25mm thick aluminiun alloy sheet foundation box, main body with stainless steel cover ,governing piovet made of brass ,other parts made of mild steel heavy duty and fixed complete all as specified and as directed. 43.00 S&F 20 mm dia Fancy type, Chromium Plated colour coated ( any coloured) curtain rod fixed to bracket/ pelmet box complete all as specified and as directed. 44.00 S&F Chromium plated Bracket for curtain rod in any size complete all as specified and as directed. 45.00 M&L Mild Steel Work in Tubular /hollow section as trusses, purlin , rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-4923 grade YSt.-240 complete all as specified and as directed. 46.00 S&F Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. and similar work complete all as specified and directed. 47.00 S&F Mild Steel as in Holdfast Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed. 48.00 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc fixed with self tapping screws etc; complete all as specified and as directed. 49.00 S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screw complete all as specified and directed. 50.00 M&L for Pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:- Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate 51.00 S&F in repair Steel rolling shutters 1.0mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated push pull or manual type etc as in repair complete all as specified and as directed. 52.00 M&L False ceiling with E board Classic , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/tiles with aluminium anodised main T section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 6mm dia GI hooks and clamp and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces as in repair complete all as specified and as directed. 53.00 M&L Powder coated aluminium 50 micron anodised partition consist of single groove rectangular section 101.60 x 44.45 x 1.60mm (Section of jindal wt @ 1.301 kg/rm) and double groove rectangular section 101.60 x 44.45 x 1.50mm (Section No 20028 of jindal wt @ 1.301 Kg/rm) including jointing cleats and glazing clips for fixing builder hardware fittings and half portion covered with 5.5 mmthick selected quality frosted or plain glass balance portion covered with 4mm thick ACP sheet including necessary fittings/fixture/aluminium snap beads, sleats etc complete all as specified and directed. 54.00 S&F Aluminium door with powder coated anodized aluminium frame of section size 101.60 mm x 44.75 mm x 2.4 mm (jindal section 14021) thick, with shutter of style member size of 85mm x 44.45 x 2.00mm thick (Jindal section 19560), Top/bottom rail of member size 114.30mm x 44.45 x 2.15mm (Jindal section 19574) and lock rail of member size 100mm x 44.45mm x 2.0mm thick (jindal section 19564) with rubber gasket and aluminium glazing clip beading and 100mm mortice locking arrangement ,handle, tower bolt 200mm long per shutter, rollers, etc complete all as specified and directed. 55.00 S&F Aluminium anodised Three track sliding window frame with shutters including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements etc. complete including glazing with 5 mm thick tinted glass to aluminium frame work using rubber gasket where the section of frame and shutter as in repair complete all as specfied and directed as under :-(A) Sections for frame (i) Top and verticals 92x 29.50 x 1.30 mm thick (ii) Bottom 92 x 29.50 x 1.20 mm thick. (B) Sections for shutter (i) A section 39 x 20 x 1.50 mm thick (ii) Interlock section 39 x 20 x 1.50 mm thick(iii) H section 41 x 20 x 1.10 mm thick 56.00 S&F Aluminium ventilator with powder coated anodized aluminium frame of section size 65.5 x 38.10 x 1.5 mm and Shutter with section 47.62mm x 44.5mm x 1.5mm thick half portion fixed with glass and half portion louvered including powder coated alunimium anodised “D” handle, hinges, peg stays, tower bolt etc including jointing cleats for fixing Builder hardware complete all as specified & directed. 57.00 Stripping of old tarfelt including layer of plaster or morter of any type treatement carefully from roof surfaces (without damage of roof) and roughening of surface of old concrete roofing by picking sweeping cleaning and washing down with water to remove dust as directed and specified. 58.00 Materials and labour for 20 mm thick screed bed of bedding layer in CM 1:4 surface finished even and smooth without using extra cement for padding including neat cement slurry @ 3.0 kg per Sqm complete all as specified and directed. 59.00 M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturers instructions, complete all as specified and as directed :-(a) Preparing and cleaning of fully dry surface as per IS:3067-1966.(b) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.40 Litre per Sqm.(c) Applying a layer of APP based Polymeric Membrance; 3.0mm thick (minimum) weighing 3.00 Kilogram per Square Metre (reinforced) with Polyster Non Woven Fabric weighing not less than 160 Grams per Square Metre by Torch application. The overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. 60.00 M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. 61.00 M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. 62.00 M&L Non-skid Ceramic Coloured Tiles, 7.0mm to 8.0mm thick (square/rectangular), area of each tile exc 0.18 sqm but not exc 0.38 sqm in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 15mm thick screed bed (1:6) in cement mortar complete all as specified and as directed. 63.00 M&L Coloured /digital vitrified ceramic floor tiles 8-9 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc. 0.36 sqm (600mm x 600mm x 10mm) as in Floors, etc. Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over 20mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed. 64.00 M&L Coloured /digital vitrified ceramic floor tiles 8-9 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n. exc. 0.36 sqm (600mm x 600mm x 10mm) on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles over and including 10mm thick backing layer in cement mortar (1:4) complete all as specified and as directed. 65.00 M&L glazed ceramic coloured tiles 450x300x6-7mm in vertical surfaces set and jointed in in neat cement slurry and pointed in cloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. 66.00 S&F Machine cut kota stone slab flooring 20-25mm thick on Vertical Surfaces such as Skirting, Dados, Risers to Steps, etc., Set Pillar and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the Shade of the Tiles including rubbing and polishing complete over 20mm thick 1:4 cement mortar screed bed complete all as specified and as directed. 67.00 M&L Granite (of any type) Work (Table rubbed and polished) 18 to 20 mm thick, in Steps, Cooking Platforms and like, Set in Screed bed of 20mm thick in Cement Mortar 1:4 including Pointing in White Cement 1:2 using Marble Dust with admixture of Pigment to match with Shade of Granite including Cutting and Polishing including half round edges, including demolition of old tiles/surface complete all as specified and as directed. 68.00 M&L Pre polished Chequered cement concrete tiles of size 300mm x300mm x25mm thick, with grey cement and no pigment, jointed in neat cemnt slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including taking out old unserviceable chequered tiles complete all as specified and as directed. 69.00 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed 70.00 M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection laid in panels, finish the top surfaces even and smooth without using extra cement complete all as specified and directedNote:- Construction joints will be provided at interval of 2.5m length and filled with bitumen 80/20 mix with sand in ratio of 1:3 and cost of the same shall be deemed included in quoted rate. 71.00 M&L Cement Concrete type B1(1:2:4) (20mm graded crushed stone aggregate) 40 mm thick as in Floor, finishing Concrete Surfaces Even and smooth without using Extra Cement, complete all as specified and as directed. 72.00 M&L Cement Concrete type B1(1:2:4) (20mm graded aggregate) 25mm thick, as in sub base by maintaining required gradient/ undulation, finishing concrete surfaces fair and fair to receive the topping layer, complete all as specified and as directed. 73.00 M&L for 5 mm thick rendering on brick or concrete surfaces of wall in CM 1:3 and finished even and smooth without using extra cement complete all as specified & directed. 74.00 M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and smooth without using Extra Cement complete all as specified and as directed. 75.00 M&L Rendering 15mm thick in Cement Mortar on fair faces of brick work or concrete surface of wall in two layer, first layer 10 mm thick in cement morter (1:4) and top layer 5 mm thick in cement morter (1:4) using water proofing compound and finishing the surface even and fair without using extra cement complete all as specified and as directed. . (NOTE:-WPC shall be measured and paid separately) 76.00 Supply only liquid water proofing compound (ISI marked) complete all as specified and directed. 77.00 M&L Preparing old decorated Plaster Surfaces of Wall and applying One Coat of white wash complete all as specified and as directed. 78.00 M&L Preparing old decorated Plaster Surfaces of Ceiling and applying One Coat of white wash complete all as specified and as directed. 79.00 M&L Preparing new Surfaces of Ceilng and applying Three Coats of White Wash, complete all as specified and as directed. 80.00 M&L Preparing old decorated Plaster Surfaces of ceiling and applying One Coat of oil bound distemper (any colour /tint) complete all as specified and as directed. 81.00 Material and labour for preparation of existing old wall surface and applying one coat of oil bound distemper (any colour/tint) on wall surfaces complete all as specified and directed. 82.00 M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 2 mm thick wall care putty on ceiling surfaces including rubbing with emmery paper to make surface smooth and even complete all as specified and directed. 83.00 M&L for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer over 2 mm thick wall care putty (Birla/Asian) on wall surfaces including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. 84.00 M&L for complete removal of existing finishes and treating with two coats of oil bound distemper (any colour/tint) over a coat of Chalk whiting, over 2 mm thick wall care putty (Birla/Asian) on wall surfaces including rubbing with emmery paper to make wall surface smooth and even complete all as directed and specified. 85.00 M&L for preparation of old plastered surface and applying one coats of weather proof exterior emulsion paint over a coat of primer with approved colour and pattern complete all as directed and specified 86.00 M&L Preparing new plaster surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed. 87.00 M&L for complete removal of existing finishes and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified & directed. 88.00 M&L Preparing new Surfaces of Walls upto 4th storey and applying Two Coats of Cement Base Paint over a coat of primer includning necessary scaffolding and safety measures complete all as specified and as directed. 89.00 M&L Complete removal of old decorated surfaces and Finishing and applying Two Coats of Cement Based Paint over a coat of alkali resistant primer complete all as specified and as directed. 90.00 Material and labour for preparation of existing old wall surface applying one coats of cement based paint on walls surfaces complete all as specified and directed. 91.00 S&F Sheet Glass 4.0mm thick ordinary quality glazing with Oil Putty in Square or Rectangular, not exc. 0.50 Sqm, complete all as specified and as directed. 92.00 S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 93.00 S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. 94.00 M&L Preparing old Wooden Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. 95.00 M&L Preparing new Wood and Wood Based Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of Pink Primer, complete all as specified and as directed. 96.00 M&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. 97.00 M&L for Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel plaint over a coat of red oxide all as specified and directed by Engineer-in-Charge. 98.00 M&L Preparing old Wooden Surfaces of any description not otherwise decribed n. exc 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. 99.00 M&L for PreparatioM&L Preparing old Steel Surfaces of any description not otherwise decribed over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. 100.00 Supply and Laying Steel Water Tubing 15mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old unserviceable tubes and deposit to store complete as all specified and as directed. 101.00 Supply and Laying Steel Water Tubing 20mm Bore (dia), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, including taking down old unserviceable tubes and deposit to store complete as all specified and as directed. 102.00 M&L for taking down and refixing of old Steel Water Tubing 15mm Bore (dia), and connections with all new Fittings such as bends, elbows, tees, short pieces, connectors, back nut, reducer, diminishing pieces, caps, unions and plugs etc but except Steel tube connection, in new or old position such as fixed on Walls, Ceiling or laid in Floors or any other Situation, cleaning the same or deposit to store complete as all specified and as directed. 103.00 M&L for taking down and refixing of old Steel Water Tubing 20mm Bore (dia), and connections with all new Fittings such as bends, elbows, tees, short pieces, connectors, back nut, reducer, diminishing pieces, caps, unions and plugs etc but except Steel tube connection, in new or old position such as fixed on Walls, Ceiling or laid in Floors or any other Situation, cleaning the same or deposit to store complete as all specified and as directed. 104.00 S&F work in repair for 16mm outer dia of CPVC water tubes SDR 11 with all fittings SDR 11 and fixed complete to walls and ceilings or laid in floors including taking down of old pipe complete all as specified and directed 105.00 S&F work in repair for 20mm outer dia of CPVC water tubes SDR 11 with all fittings SDR 11 and fixed complete to walls and ceilings or laid in floors including taking down of old pipe complete all as specified and directed 106.00 S&F 16mm bore brass MTA for CPVC pipe as in repair complete all as specified and directed. 107.00 S&F 20mm bore brass MTA for CPVC pipe as in repair complete all as specified and directed. 108.00 S&F 16mm bore brass FTA for CPVC pipe as in repair complete all as specified and directed. 109.00 S&F 20mm bore brass FTA for CPVC pipe as in repair complete all as specified and directed. 110.00 S&F 16mm bore brass elbow for CPVC pipe as in repair complete all as specified and directed. 111.00 S&F 20mm bore brass elbow for CPVC pipe as in repair complete all as specified and directed. 112.00 S&F 16mm bore brass Tee for CPVC pipe as in repair complete all as specified and directed. 113.00 S&F 20mm bore brass Tee for CPVC pipe as in repair complete all as specified and directed. 114.00 S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed as in repair complete all as specified and directed. 115.00 S&F Bip tap with nozzle 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight15mm-95 gms) as in repair complete all as specified and directed. 116.00 S&F Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min weight 15mm-120gms) as in repair complete all as specified and directed. 117.00 S&F Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min weight 15mm-120gms) as in repair complete all as specified and directed. 118.00 S&F PTMT Grating Doom of 100mm dia size (Min weight 25 grms) and fixed-in-repairs, complete all as specified and as directed. 119.00 S&F PVC soap dish standard size fixed with walls incl necessary fittings & fixtures as in repair complete all as specified & directed. 120.00 S&F 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm for any type/make/size for stainless steel sinks, basins,urinal etc as in repair complete all as specified and directed. 121.00 S&F 32 mm dia Flush pipe of low/high density polyethylene pipe as directed including jointing to any type of WC and any type/size/make of low level flushing cistern and make good dismantle floor to match the existing surfaceas in repair complete all as specified and directed. 122.00 S&F PVC connection pipe 15mm size with PTMT nuts of length 450mm long as in repair complete all as specified and directed. 123.00 S&F in repair PVC (SWR) Soil, Waste and Ventilating Pipe 110mm bore (dia), single socketed, in any length with Rubber Ring Joints fixed to Walls, complete all as specified and as directed. 124.00 S&F in repair PVC (SWR) Bend 110mm bore (dia), any type, and Jointing with Solvent Cement, complete all as specified and as directed. 125.00 S&F in repair PVC (SWR) Junction 110mm bore (dia), Single (Single T) equal or unequal and Jointing with Solvent Cement, complete all as specified and as directed. 126.00 S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash, float valve and overflow pipealongwith PTMT Ball Valve 20mm dia , high pressure with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. 127.00 S&F Stainless Steel Sink with Drainage Board l.0mm thick Overall size 915mm x 460mm and Bowl size 410 mm x 355 mm x 165 mm for Kitchen or Laboratory with Plugs, Washers, Brass chromium plated Waste Fitting 32mm dia, PVC waste pipe, a Pair of Cast Iron Brackets duly Painted including Cutting and Pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including Taking down/out unserviceable Sink and connected Items, complete all as specified and as directed. 128.00 S&F Vitreous China Colour Wash down Water Closet Pan (Pedestal Pattern) with p or s trap front or back inlet including fixing Bolts with and excluding 10 litre capacity low level Flushing Cistern matching with water closet colour with inlet ball valve float handle and providing 32mm dia PVC flush pipe including plastic water closet seat with flat bottom cover (coloured) fixed with mild steel chromium plated or aluminium hinging device including taking down old unserviceable one complete all as specified and as directed. 129.00 S&F in replacement Vitreous China White Squatting Pan ‘ORISSA’ Pattern, size 580x440mm with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan including Flushing Cistern and Flush Pipe, fixing with and including provision of cement Concrete Bedding complete all as specified and as directed. 130.00 Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete as directed. 131.00 S&F in repair for vitreous China urinal half stall type (back or cornerwall type) complete including providing & fixing plugs bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with & including 60mm long brass screw, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe ,grating and union for discharge pipe .(Exclisive of fixing supply pipe to flushing cistern, trap and waste pipe ),complete all as specified and directed . 132.00 S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and as directed . 133.00 S&F EWC Cascade type (coloured) floor mounted water closet with low level flushing cistern coloured with floor trap, PVC coloured seat cover and connecting pipe etc and making all necessary connections etc as in repair complete all as specified and as directed. 134.00 S&F in repairs Plastic seat cover white for EWC with flat bottom incl hinging device complete all as specified & directed. 135.00 S&F Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a pair of Cast Iron Brackets duly painted including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. 136.00 S&F Brass chromium plated fancy type bib cock screwed for 15 mm bore of pipe etc. as in repair complete all as specified & directed. Make:- Essco Cat pat No DLX 511 AKN or equivalent make as specified in the particular specfication. 137.00 S&F Brass chromium plated fancy type stop cock screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed. Make :-Essco cat part no. DLX 513BKN or equivalent model as specified in Particular specification. 138.00 S&F Brass chromium plated fancy type pillar tap screwed for 15 mm bore of pipe etc.incl necessary fittings & fixtures as in repair complete all as specified & directed. Make:- Essco Cat pat No DLX 507 KN or equivalent make as specified in the particular specfication. 139.00 S&F 125 mm dia brass chromium plated shower rose with or without swivels joint for fixing to 15 mm bore pipe etc complete including taking down old one complete all as specified and directed. 140.00 S&F Towel ring of size 150mm dia decorative type fixed with walls including necessary fittings etc as in repair complete all as specified and as directed. 141.00 S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60,cm long between flanges as in repair complete all as specified and directed. 142.00 S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. 143.00 S&F 3-in-1 wall mixer for Hot & Cold water supply with telephonic shower arrarengement, brass chromium plated fancy type, screwed down for 15mm bore iron pipe incl necessary fittings & fixtures etc.as in repair complete all as specified and directed. 144.00 S&F CP Kitchen sink mixture with regular swinging spout (wall mounted model) chromium plated screwed down for iron pipes,including necessary fittings etc as in repair complete all as specified and as directed. 145.00 S&F health faucet with chomium plated with flexible cord fixed on wall screwed down for iron pipes,including necessary fittings etc as in repair complete all as specified and as directed. 146.00 S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers including Taking down unserviceable Mirror, complete all as specified and as directed. 147.00 Cutting/uprooting of tree from walls of bldgs. up to extended root and spraying of acid of required qty at any location of bldg up to 4 storied & making good disturbed surfaces with CM 1:4 or cement concrete (1:3:6) type C1 using 20mm graded aggregate including necessary scaffolding/ through rope with safety belt for size of tree of girth 5 to 10 cm complete all as specified and as directed by Engr -in-charge. 148.00 Taking down point wiring (light, fan, socket and power complete including fixtures and fittings such as switches ceiling roses, pendents , regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc. including cleaning all and specified and directed. 149.00 M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLH/S in and including concealed PVC conduit 20 mm dia medium duty ISI marked with all necessary fittings with sunken cast iron /pressed steel terminal box ,flush to surface of 1.6mm wall thickness and 3 mm thick laminated sheet top cover for mounting switches including 1.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan/bell controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 to finishing the match surface complete all as specified and directed by Engr- in-charge. 150.00 All as per item No.149.00 mentioned here-in-before but 3 pin 5 amps socket out let point same board with other switches of cables of 1.5 sqmm 151.00 All as per item No.149.00 mentioned here-in-before but for one 5 amp switch socket combination on independent board with cables of 1.5 sqmm size 152.00 All as per item No.149.00 mentioned here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly complete all as specified and directed by engineer incharge. 153.00 M&L for point wiring with PVC insulated unsheated stranded copper conductor cable FRLH/S of size 1.5 sq mm in and including PVC casing caping of required width with all necessary fittings with sunk cast iron /pressed steel terminal box of1.6mm wall thickness and 3 mm thick laminated sheet top cover for mounting switches including 1.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light / ceiling fan/exhaust fan controlled by one switch, one way complete all as specified and directed by Engineer incharge. 154.00 All as per item No.153.00 mentioned here-in-before but 3 pin 5 amps socket out let point same board with other switches of cables of 1.5 sqmm 155.00 All as per item No.153.00 mentioned here-in-before but for one 5 amp switch socket combination on independent board with cables of 1.5 sqmm size 156.00 All as per item No.153.00 mentioned here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed by Engineer-in-Charge. 157.00 All as per item No.153.00 mentioned here-in-before but using 4 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board or for AC Starter including 4 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed by Engineer-in-Charge. 158.00 S&F lamp holder insulated body with back plate for batten fittings complete all as directed. 159.00 S&F in repair lamp holder insulated body with back plate for batten fittings complete all as directed. 160.00 S & F in repair switch piano modular flush type 5/6 Amps 230V AC oneway complete all as specified and directed by Engineer-in-Charge. 161.00 S&F in repair modular socket outlet 3 pin 5/6 Amps 230 volts 1 module flush type complete all as specified and directed by Engineer-in-Charge. 162.00 S & F in repair switch piano modular flush type 16 Amps 230V AC complete one way 1 module complete all as specified and directed by Engineer-in-Charge. 163.00 S&F in repair modular bell push flush type 5 Amps 1 module complete all as specified and directed by Engineer-in-Charge. 164.00 Fixing only modular one/ two way switches, socket outlet and bell push of 1 module and of any capacity complete all as specified. Note:- Serviceable switches and socket outlet shall be obtained from item No. 151.00 mentioned here-in-before. 165.00 S&F in repair modular switch socket outlet multipurpose 3 pin 6/16 Amps 2 module complete all as specified and directed by Engineer-in-Charge. 166.00 S& F in repair modular electronic step type fan regulator by step type 230 volt 2 module complete all as specified and directed by Engineer-in-Charge. 167.00 Fixing only modular switch socket outlet and fan regulator of 2 module and of any capacity complete all as specified. Note:- Serviceable switch socket outlet and fan regulator shall be obtained from item No. 151.00 mentioned here-in-before. 168.00 S & F switch piano flush type 5/6 Amps 230V AC one way complete all as specified and directed by Engineer-in-Charge. 169.00 S & F in repair switch piano flush type 5/6 Amps 230V AC one way complete all as specified and directed by Engineer-in-Charge. 170.00 S&F socket outlet 3 pin 5/6 Amps 230 volts flush type. complete all as specified and directed by Engineer-in-Charge. 171.00 S&F in repair socket outlet 3 pin 5/6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge. 172.00 S&F bell push flush type 5 Amps 230V complete all as specified and directed by Engineer-in-Charge. 173.00 S&F call bell, ding dong AC 230 volt single pole (ding dong type) complete all as specified and directed by Engineer-in-Charge. 174.00 S&F in repair call bell, ding dong AC 230 volt single pole (ding dong type) complete all as specified and directed by Engineer-in-Charge. 175.00 S&F ceiling rose surface bakelite 65x50mm single phase complete all as specified and directed by Engineer-in-Charge. 176.00 S&F in repair ceiling rose surface bakelite 65x50mm single phase complete all as specified and directed by Engineer-in-Charge. 177.00 S&F switch socket combination 2in 1 3 pin 6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge. 178.00 S&F in repair switch socket combination 2in 1 3 pin 6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge. 179.00 S&F switch socket combination multipurpose 3 pin 10 and 20 Amps one switch complete all as specified and directed by Engineer-in-Charge. 180.00 S&F in repair switch socket combination multipurpose 3 pin 10 and 20 Amps one switch complete all as specified and directed by Engineer-in-Charge. 181.00 S&F ceiling fan regulator electronic Step type, solid state, 240 volts, complete all as specified and as directed 182.00 S&F in repair ceiling fan regulator electronic Step type, solid state, 240 volts, complete all as specified and as directed 183.00 S&F in repair ceiling fan regulator socket type, solid state, 240 volts, complete all as specified and as directed 184.00 Fixing only swithes, switch socket combination, ceiling rose, call bell and lamp holder, regulator etc of any capacity complete all as specified. Note:- Serviceable swithes, switch socket combination, ceiling rose, call bell and lamp holder shall be obtained from item No. 151.00 mentioned here-in-before. 185.00 S&F in repair switch socket combination with box multipurpose 3 pin 10 and 20 Amps one switch complete all as specified and directed by Engineer-in-Charge. 186.00 S&F in repair switch socket combination with box 2in 1 3 pin 6 Amps 230 volts flush type complete all as specified and directed by Engineer-in-Charge. 187.00 Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. 188.00 S & F LED bulb 9Watts 240V 50Hz 6500K b22 base in bulb holder complete all as specified and directed by Engineer-in-Charge. 189.00 Supply and fix Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base complete with all the connection complete all as specified and directed by Engineer-in-Charge. 190.00 Supply and fixing LED ceiling fitting Recess mounted 2ft x 2ft luminaire, 35/36w, Deep drawn CRCA housing with efficacy of 100 lm/W provides uniform illumination. Designed to create best in class illumination and to be fixed in ceiling including fixing arrangement complete all as specified and directed by Engineer-in-Charge. 191.00 S&F building security light pressure die cast housing with individual LEDs with modular secondary optics security light luminaires 35 watt LED with 50mm dia light grade GI pipe bent to shape of 45 1.5 mtr long and nuts bolts including fixing arrangement complete all as specified and directed by Engineer-in-Charge. 192.00 Supply and fix plug top 3 pin16A 240V Easy to carry, Non flammable & Durable Heavy duty ,nickel plated brass terminals Long lasting polycarbonate plastic material complete all as specified and directed by Engineer-in-Charge. 193.00 S&F in replacement plug and socket in sheet metal enclosures with two pin and earth plug and socket complete with and including MCB SP 20 Amps 240 volts heavy duty all as specified and as directed by Engr-in-charge. 194.00 S&F in repair A C starter unit consisting of one 25 Amp capacity starter, one 240 V 25 Amps 10 KA SPN MCB, one 25 Amps socket and one 25 Amps plug top prewire complete all as specified and directed by Engineer-in-Charge. 195.00 S&F sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls complete for 2 modules including taking down of old unsv one complete all as specified and directed by Engineer-in-Charge. 196.00 All as per item No.195.00 mentioned here-in-before but for 3 modules 197.00 All as per item No.195.00 mentioned here-in-before but for 4 modules 198.00 All as per item No.195.00 mentioned here-in-before but for 6 modules 199.00 All as per item No.195.00 mentioned here-in-before but for 8 modules 200.00 All as per item No.195.00 mentioned here-in-before but for 12 modules 201.00 S&F modular cover plate with frame for fixing of modular switches/sockets complete for 2 modules complete all as specified and directed by Engineer-in-Charge. 202.00 All as per item No.201.00 mentioned here-in-before but for 3 modules 203.00 All as per item No.201.00 mentioned here-in-before but for 4 modules 204.00 All as per item No.201.00 mentioned here-in-before but for 6 modules 205.00 All as per item No.201.00 mentioned here-in-before but for 8 modules 206.00 All as per item No.201.00 mentioned here-in-before but for 12 modules 207.00 Taking down unserviceable rusted / damaged MCB DBs of any type and way along with any type MCB and keeping serviceable MCB in safe custody in re-use in the work and making good to the distubed surfaces of walls etc. complete all as specified and as directed. 208.00 S&F MCB TPN DB made up with sheet metal, phosphorised, power coated, neutral link, earth bar and din rail, 4 way TPN with 200 amps rated bus bar, 415 volts complete all as specified and as directed. 209.00 S&F MCB SPN DB made up with sheet metal double door, phosphorised, power coated, neutral link, earth bar and din rail, 4 way with 200 amps rated bus bar, 240 volts complete all as specified and as directed. 210.00 S&F sheet metal enclosure for DBs when MCBs to be used 12 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified. 211.00 S&F MCB TPN 63 to 100 amps 240 volts 10KA breaking capacity C Curve complete all as specified. 212.00 S&F MCB 6 to 32 amps 240 volts 10KA single pole complete all as specified. 213.00 Fixing only MCB 6 to 32 amps 240 volts 10KA single pole complete all as specified. Note:- Serviceable MCBs shall be obtained from item No. 228.00 mentioned here-in-before. 214.00 S&F in repair MCB 6 to 32 amps 240 volts 10KA single pole complete all as specified. 215.00 S&F MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified. 216.00 Fxing only MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified. Note:- Serviceable MCBs shall be obtained from item No. 228.00 mentioned here-in-before. 217.00 S&F in repair MCB DP 40 to 63 amps 240 volts 10KA breaking capacity complete all as specified and directed by Engineer-in-Charge. 218.00 S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 6 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 6 sqm as earth lead drawing into rigid non metalic PVC conduit of size 20mm dia including taking down old unsv complete all as specified. Note: Two run of 6 sqmm cable and one run of 6 sqmm cable will be measured as single length. 219.00 S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 4 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 4 sqm as earth lead drawing into rigid non metalic PVC conduit of size 20mm dia including taking down old unsv complete all as specified. Note: Two run of 4 sqmm cable and one run of 4 sqmm cable will be measured as single length. 220.00 Supply and fix in repair electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete as directed.Note:- Unserviceable meter shall be deposited to store. 221.00 Supply & fix in repairs PVC flaxible 2 core cable with Copper conductor of size 0.75 sqmm from ceiling rose to fan of 1100 volts grade complete all as specified and directed. 222.00 Supply & fix in repairs 1.5 Sqmm FRLSH Copper conductor coil in existing concealed conduit 1100 volts grade complete all as specified and directed. 223.00 Supply & fix in repairs 2.5 Sqmm FRLSH Copper conductor in existing concealed conduit 1100 volts grade all as specified and directed. 224.00 S&F in replacement of PVC conduit 20 mm dia medium duty in existng wiring with accessories like MS tee, bend, elbow of high quality material size 12-20mm of 2m length complete all as directed. 225.00 Taking down and opening out the ceiling fan/wall mounted upto1200/1400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots complete including materials like split pin, rubber reel etc and reassembling and refixing of fan complete with and including minor Spares, if any required complete all as specified and as directed. Note : Spare parts shall be measured & paid separately. 226.00 Supply and fix in replacement Ceiling fan stator 48 inch sweep 12 mm copper winding including thick steel bolt with double nuts and locking pins and high quality rubber bushing to reduce vibration complete all as specified and directed by Engg-in-charge 227.00 Supply and fix in replacement rotor complete with copper winding suitable for 48 inch sweep ceiling fan complete all as specified and directed by Engg-in-charge 228.00 Supply only ball bearing suitable for 1200/1400mm sweep Ceiling fan of any make. 229.00 Supply only capacitor of 2.5 mfd for Ceiling Fan 230.00 Supply only gun metal bush of suitable size for ceiling fan of sweep 1200mm/1400mm as per existing one complete. 231.00 Supply only shafts for ceiling fan suitable for 1200mm sweep 232.00 Supply only PVC connector for Ceiling Fan 233.00 Supply only fan blades for Ceiling fan suitable for 1200mm sweep/1400mm sweep. 234.00 Supply only nuts, bolts, for Ceiling fan 235.00 Supply only rubber real insulator for Ceiling fan 236.00 Supply and fix in repair PVC canopy set (upper & lower) for ceiling fans of any sweep and make and fixing in position complete all as specified and directed by Engg-in-charge. 237.00 Supply and fix in repair MS heavy duty down rod of 15mm dia and 600mm length with necessary cutting / drilling holes and painting for ceiling fans complete all as specified and directed by Engg-in-charge. 238.00 Supply & Fix in repair ceiling fan mild steel body set (upper & lower) for ceiling fans of any sweep and make and fixing in position complete all as specified and directed by Engg-in-charge. 239.00 M&L for painting of ceiling fan/wall fan/exhaust fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc complete all as specified and directed by Engineer-in-Charge. 240.00 Taking down and opening out the exhaust fan upto 400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and repairing of slots rubber reel etc. reassembling and refixing of fan complete including all as specified and as directed. 241.00 Supply and fix in replacement exhaust fan stator upto 400 sweep , copper winding including thick steel bolt with double nuts and locking pins and high quality rubber bushing to reduce vibration complete all as specified and directed by Engg-in-charge 242.00 Supply and fix in replacement rotor complete with copper winding suitable for 300 sweep exhaust fan all as specified 243.00 M&L for painting of exhaust fan of any size and sweep complete, in situ with approved colour synthetic enamel paint by spraying including filling with cavities with filler, one coat after cleaning all dust etc. 244.00 Supply only bush suitable for exhaust fan. 245.00 Supply only ball bearing suitable for exhaust fan. 246.00 Supply only capacitor 2.5 mfd for exhaust fan. 247.00 S&F in replacement MS louvers with shutter of exhaust fan upto any sweep upto 12th storey building complete including arrangement of scaffolding for fixing of louvers with all nuts, bolts and washers and finished properly with cement work as per existing complete all as specified and as directed by engr in charge 248.00 Taking down carefully unserviceable geyser of any type and make from site after disconnections of water & electrical connections & carrying out to MES store yard for inspection and thereafter to workshop for repair & replacement of components such as heating element, thermostate, cable, neon lamp, plugtop, outer casing, plates & repair work to apparatus plate, copper tank,split plate including de-scaling of water tank etc and carrying back to MES store yard for testing and refixing at site and making water & electrical connection on completion and all as directed. 249.00 M&L for brazing/gas welding of inner container copper of 25 ltrs /50 ltrs capacity and any make and making leak proof all as directed. 250.00 Supply only following spares for geysers:-Heating element 2.00KW including rubber gasket ISI marked suitable for existing geysers. 251.00 Thermostate for suitable existing geyser of 25/50 litrs capacity 252.00 Chromium plated copper pipe of length not less than 60cm including washers for incoming & outgoing hot & cold water connections as specified and directed by Engr-in-charge 253.00 Apparatus plate assembly complete for geyser of capacity 25/50 litrs capacity. 254.00 Outer casing made out of 22 SWG MS sheet suitable for geyser of capacity 25 litrs. 255.00 Storage tank fabricated from copper sheet gauge suitable for geyser of capacity 25 ltrs of make as specified and approved. 256.00 Split plate bottom cover made out of 22 SWG MS sheet suitable for 25 litrs capacity geyser 257.00 Split plate top cover made out of 22 SWG MS sheet suitable for 25 litrs capacity geyser 258.00 Insulating material glass wool 259.00 Element holding brass stud 260.00 Element holding MS clamp 261.00 Fusible metal plug 262.00 Neon lamp round/square with connection lead 263.00 Non return valve for geyser inlet1 Old Unserviceable Brick bats Cum 5.50 750.00 4125.00 2 Old Unserviceable chowkat with sutter incl all fittings and fixtures area exc.1.50sqm but n.exc. 4.00sqm Each 8.00 350.00 2800.00 3 Old Unserviceable chowkat with sutter incl all fittings and fixtures area n. exc.1.50sqm Each 8.00 250.00 2000.00 4 Old Unserviceable door shutter incl all fittings and fixtures n. exc. 1.00 sqm Per 5.00 250.00 1250.00 5 Old Unserviceable door shutter incl all fittings and fixtures area exc. 1.00 sqm & n. exc 2.00 Sqm Per 8.00 250.00 2000.00 6 Old Unserviceable Timber Scantlings of any description Cum 0.30 5000.00 1500.00 7 Old Unserviceable Timber Fillets of any description RM 30.00 10.00 300.00 8 Old Unserviceable iron scrap Kg 310.00 20.00 6200.00 9 Old Unserviceable Brass scrap Kg 20.00 200.00 4000.00 10 Old Unserviceable PVC scrap Kg 10.00 10.00 100.00 11 Old Unserviceable Aluminium scrap Kg 30.00 100.00 3000.00 12 Old Unserviceable Building hardware such as Mild Steel Butt hinges, Aluminum tower bolts, Aluminum Handle, Steel Concealed Hinges, cupboard knobs of any size Each 178.00 5.00 890.00 13 Old Unserviceable Aluminum Sliding Door Bolt, Door Closer hydraulically, Steel Floor door stopper, MS Mortice lock, MS Mortice night latch, floor spring hydraulically, MS Safety lever locks etc of any size Each 28.00 25.00 700.00 14 Old Unserviceable rolling shutter of any size RM 15.00 300.00 4500.00 15 Old Unserviceable MS Drapery rod with stainless steel bracket of any size RM 50.00 25.00 1250.00 16 Old Unserviceable CGI/PGI roof sheet of any description Sqm 115.00 75.00 8625.00 17 Old Unserviceable Wall and ceiling board in any description Sqm 100.00 20.00 2000.00 18 Old Unserviceable Powder coated Aluminium door, window,ventilator,partition of any description Sqm 27.00 50.00 1350.00 19 Old Unserviceable stainless steel wire mesh Sqm 10.00 10.00 100.00 20 Old Unserviceable brass MTA, FTA, elbow, Tee etc of any size Each 20.00 15.00 300.00 21 Old Unserviceable PTMT/PPR Ball valves, PVC Bend, PVC Junction, PVC waste/ flush pipe, waste fittings, grating, PVC connection any size and description Each 87.00 25.00 2175.00 22 Old Unserviceable PTMT bip tap, stop cock, pillar tap, Angular Stop cock, tower rail, shower with arm, of any description Each 30.00 10.00 300.00 23 Old Unserviceable bip tap, stop cock, pillar tap, Angular Stop cock, Two way bib cock, Glass shelf assembly, Glass corner shelf , shower rose and arm, Chromium plated bottle trap, waste coupling of any description Each 30.00 25.00 750.00 24 Old Unserviceable CP basin mixer, Wall Mixer, Kitchen sink mixture of any description Each 4.00 75.00 300.00 25 Old Unserviceable stainless steel grating of any size and description Each 5.00 10.00 50.00 26 Old Unserviceable health faucet, cp toilet paper holder, cp soap dish, towel ring, towel rail jet spray, CP connector of any description Each 29.00 15.00 435.00 27 Old Unserviceable PVC seat cover, PVC tank lid/cover,PVC Syphon assembly of any description Each 8.00 10.00 80.00 28 Old Unserviceable Mirror of any description Each 5.00 25.00 125.00 29 Old Unserviceable Kitchen sink, plate rack of any description Each 1.00 150.00 150.00 30 Old Unserviceable flushing cistern, bathroom cabinet Each 8.00 25.00 200.00 31 Old Unserviceable GI pipeline 15mm bore of any description RM 20.00 20.00 400.00 32 Old Unserviceable GI pipeline 20mm bore of any description RM 10.00 25.00 250.00 33 Old Unserviceable PVC /CPVC water tubes of any size and description RM 70.00 15.00 1050.00 34 Old Unserviceable water storage tank 1000 liter of any description Each 2.00 750.00 1500.00 35 Old Unserviceable copper / aluminium point wiring. Per Point 56.00 35.00 1960.00 36 Old Unserviceable switch piano, socket outlet, Switch Socket Combination, ceiling rose, regulator, bell push, call bell, bulb holder any type and description Each 354.00 3.00 1062.00 37 Old Unserviceable LED light fittings of any description Each 30.00 50.00 1500.00 38 Old Unserviceable LED building security light of any description Each 2.00 65.00 130.00 39 Old Unserviceable plug top,plug and socket in sheet metal enclosures, A C starter unit of any description Each 18.00 25.00 450.00 40 Old Unserviceable sunken flush metal GI boxes of any description Each 18.00 10.00 180.00 41 Old Unserviceable modular cover plate of any description Each 18.00 1.00 18.00 42 Old Unserviceable MCB DB of any capacity Each 3.00 35.00 105.00 43 Old Unserviceable MCB SP/DP/TPN of any capacity Each 58.00 10.00 580.00 44 Old Unserviceable Submain wiring any size RM 75.00 15.00 1125.00 45 Old Unserviceable Capacitor of any capacity Each 51.00 3.00 153.00 46 Old Unserviceable rotor,stator of any capacity Each 86.00 3.00 258.00 47 Old Unserviceable ball bearing Each 70.00 2.00 140.00 48 Old Unserviceable fan bush, PVC canopy set Each 78.00 1 78.00 49 Old Unserviceable shaft Each 42.00 3.00 126.00 50 Old Unserviceable fan blades Set of 3 35.00 10.00 350.00 51 Old Unserviceable MS down rod Each 35.00 10.00 350.00 52 Old Unserviceable nuts,bolts Each 35.00 1.00 35.00 53 Old Unserviceable burnt copper winding of ceiling/exhaust fan. Each 42.00 80.00 3360.00 54 Old Unserviceable PVC cassing caping/ concealed conduit RM 5.00 5.00 25.00 55 Old Unserviceable copper/aluminium conductor RM 180.00 2.00 360.00 56 Old Unserviceable MS Louvers Each 12.00 50.00 600.00 57 Old Unserviceable Heating element of any type Each 6.00 20.00 120.00 58 Old Unserviceable Thermostat of any type Each 6.00 25.00 150.00 59 Old Unserviceable Chromium plated copper pipe of any type Each 12.00 20.00 240.00 60 Old Unserviceable Apparatus plate of any type Each 6.00 40.00 240.00 61 Old Unserviceable Outer casing for geyser of any type Each 6.00 35.00 210.00 62 Old Unserviceable copper storage tankfor geyser of any type Each 6.00 40.00 240.00 63 Old Unserviceable split plate bottom/top cover of any type Each 6.00 5.00 30.00 64 Old Unserviceable metal plug Each 6.00 10.00 60.00 65 Old Unserviceable NRV Each 6.00 20.00 120.00 66 Old Unserviceable Pressure Reducing Valve Each 6.00 50.00 300.00
Contract Date: Feb 03, 2026 Contract Value : 30.99 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
West Bengal View Result →
19.
Defence #8473924 AOC
Tender For Comprehensive Maintenance And Certain Misc B/R And E/M Works At C1 And C1a Area Under Ge(East) Mathura Mil Stn; 1 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 2 M&L for coloured Non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchl aidover and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 3 M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchl aidover and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. 4 M&L forcoloured Glazed ceramic tiles on vertical surface 600x300x7-8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and including 10 mm thick backing coat of cement mortar in 1:4 complete all as specified and directed. 5 M&L for coloured double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqmbut not exceeding 1.00 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. 6 Demolition of Stone slabs and tiles of any description or thickness (except ceramic tiles) in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. 7 M&L for 16-18 mm thick Granite Z black slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over and including 20mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2 )using marble dust with admixture of pigment to match with shade of granite, including rounded/half rounded edge and providing hole for gas pipe in pre-cast slab as well as in granite slab of cooking platformcomplete all as specified and as directed. 8 Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and as directed. 9 M&L for Brick work with old size fly ash Bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. 10 Taking down cement plaster on brick or stone walls,concrete surface etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. 11 M&L rendering 15mm thick on fair face of brick work/concrete in CM 1:4 and finishing surface even and fair by mixing liquid water proofing compound including two coats of Apex exterior emulsion paint over one coat of alkali resistant primer as per manufacturers instructions complete all as specified and as directed.Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ. 12 Supply only liquid water proofing compound hydroseal-W+ /Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by Engineer-in-charge. 13 M&L for rendering 15 mm thick on other than fair faces brick wall or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed. 14 M&L for 10mm thick rendering on fair faces of brick/concrte surface as in ceiling in cement mortar 1:3 finished the surface even and smooth without using extra cement and applying threecoats of white washon ceiling surface complete all as specified and directedcomplete all as specified and as directed. 15 M&L for preparationof new plastered surface of wall and applying providing one coat ofwall care putty ,two coats of Oil Bound Distemper over and including one coat of alkali resistant primer on wall complete all as specified and directed by Engineer-in-Charge. 16 M&L for preparationof new plastered surface of ceiling and applying threecoats of white washon ceiling surface complete all as specified and directed by Engineer-in-Charge. 17 M&L for preparartion of new plastered surfaces of walls and applying two coats cement base paint on walls complete all as specified and as directed. 18 Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removalfrom site complete all as specified and as directed. 19 Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removalfrom site complete all as specified and as directed. 20 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and as directed. 21 Supplying & fixing steel tubing ,galvanised, medium grade 15 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed. 22 Supplying & fixing steel tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed. 23 S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 24 S&F in repair 75 mm bore PVC (SWR)pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 25 S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wallscomplete all as specified and as directed. 26 S&F in repair 110 mm bore PVC (SWR) plain bends any radius complete all as specifiedand as directed. 27 S&F in repair 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed. 28 S&F in repair PVC floor trap plain 75 mm dia of outlet with grating including jointing with solvent cement complete all as specified and as directed. 29 S&F long body bib taps cast copper alloy, chromium plated, fancy type with half turm handle having weight of bib tap should not be less than 450 gms or as per SSR Part-I specification for iron pipes15 mm bore dia complete all as specified and as directed.Make:-Jaquar Cat Part No. KUP-CHR-35037/CERA Cat Part No. F-1003151/Kohler Cat Part No. K-160931N-4-CP 30 S&F in repair fancy type 15 mm size long body angular cock, cast copper alloy, chromium plated, fancy type with capstan head having weight of angular cockshould not be less than 450 gms or as per SSR Part-I specification, screwed down, screwed both end for iron pipes complete.Make:-Jaquar Cat PArt No. KUP-CHR-350553PM/CERA Cat Part No F-1014201/Kohler Cat Part No. K-801541N-4AV-CP 31 S&F in repairs stop valve, 15 mm chromium plated with long shank and cup (Concealed type) both ends for iron pipe 32 S&F in repair vitreous china wash hand basin white flat back size 550 x 400 mm including bracket and pair of rack bolts waste coupling pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed. 33 S&F in repairs 15 mm dia brass chromium plated pillar taplong shank with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long screwed shank having weight of pillar should not be less than 450 gms or as per SSR Part-I specification complete.Make JAquar/Kohler/CERA F 1014101 34 S&F in repairs 750 mm long PVC flexible waste pipe 32 mm dia for fixing in urinals and wash basin complete. 35 S&F in repairdesigner looking mirror of size not less than 1.0 Sqm,selected quality5 mm thick, fixed with chromium plated screws complete all as specified and as directed. 36 S&F Swivel CP shower of size 200 mm for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and as directed. 37 S&FShower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40gms) complete all as specified and as directed. 38 S & F in repairs Viterous china squatting pan, Órissa pattern, size 580 x 440mm white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified. 39 S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, complete all specified and as directed. 40 S&F in repairs 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complete. 41 S&F in repairtwo way angle cock cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes 15 mm bore dia weight of two way angle cockshould not be less than 450 gms or as per SSR Part-I specification complete all as specified and as directed. 42 S&F in repair Health faucet of superior quality ABS body with 8 mm dia 1.2 m long flexible tube and wall hook complete all as specified and as directed. 43 S&F in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete. 44 S&F in repairs stainless steel towel ring 600 mm long 20 mm diafixed with steel screw etc complete all as specified. 45 S&F in repair stainless soap dish fixed to wall complete all as specified and directed. 46 S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,including making thread to both ends of pipes for fixing,screwed both ends for iron pipes and fixed. 47 S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. 48 Taking down chowkhats or frame with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each and making good the disturbed surface complete all as specified. 49 Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed. 50 Taking down shutters of any description exceeding 1.0sqm and not exceeding 2.0sqm each complete all as specified and as directed. 51 S&F Solid WPC Door Frame of size 50mm x 47mm complete all as specified and as directed. 52 S&F30 mm thick factory made WPC door with both side lamination complete all as specified and as directed. 53 S&F Pressed steel frames of size 105x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete as specified and as directed. 54 S&F Pressed steel frames of size 125x60 mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.with one shop coat of red oxide primer complete as specified and as directed. 55 M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for fixing hold fasts and filling of chowkhats etc complete all as specified and as directed. 56 M&L for prepration of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over primed surface complete all as specified and as directed. 57 S&F 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters asspecified in SSR Part-1 section 8 clause 8.24(a) complete all as specified and as directed. 58 S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed. 59 S&F 30 mm thick factory made flushshutters, solid core construction withblock board core and plywood face panel veneer type on both side complete all as specified and as directed. 60 M&L for preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 61 Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 62 Supply & fix 100mm long hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 63 S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed. 64 S&F 150 mm long aluminium anodised handle fabricatedtype all as specified and as directed by Engineer-In-Charge. 65 S&F powder coated Aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. 66 M&L for powder coated aluminium window shutters (Thickness or powder coating not less than 50 micron)., side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1 no.) complete all as specified. 67 M&L for powder coated aluminium door shutters (thickness or powder coating shall not be less than 50 microns of approved colour)aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, lock with 2 keys, anodized aluminum snap beading screws etc. complete all as specified and as directed. 68 S&F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. 69 S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe.290.Gde-E-165. 70 M&L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 71 Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. 72 Providing and fixing false ceiling with semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles at all heights with GRG (Glass fibre reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture,design and patterns having moisture content less than 2%, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part-4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 grams per sqm (including both sides) comprising of main T runnersof size 15x32mm of length 3000mm ,cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600mm to form a grid module of size 600x600mm,suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm)i.e. 50 mm long ,8mm outer diameter M-6dash fasteners ,6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall screws. The work shall be carried out as per specifications,drawing and as per directions of Engineer in charge. 73 S&F in repair floor door stopper of aluminium anodisedbodyand tengue, anodised with hard drwan steel spring overall length of cover plate 140 mm complete all as specfied and as directed. 74 S&F in repair Aluminium (die cast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed. 75 S&F in repair25 mm dia stainless steel drapery rod cut to size and fixed in position including end caps, roller and brackets fixed to wall complete all as specified and as directed. 76 S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed. 77 S&F in repair 2nd Class hard wood plain fillets square/ rectangular or trianguar in section, sectional area exc 6 Sqcm but n.exc 13 Sqcm, clean sawn and fixed withnails complete all as specified and as directed. 78 S&F in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. 79 S&F in repair 100 mm long size of hinges, extruded aluminium alloy with galvanised mild steel hings pin anodized and fixed type B-21complete all as specified and as directed. 80 S&F in repair Extruded aluminium handles of size 150 mm, fabricated type anodised complete all as specified and as directed. 81 S&F in repair aluminium anodized barrel tower bolts 200 mm length of bolt of extruded section and fixed complete all as specified and as directed. 82 S&F in repair 300 mm size mild steel rat tail rod pattern door springs ISI marked including roller & roller plate etc complete all as specified and as directed. 83 Demolition of concrete of any description and position not otherwise specifically provided for as in sunken floor etc. complete all as specified and as directed. 84 M&L for providing cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in lintel upto 1.5 m span, coping, kerbs, stops, cills, bed plate and the like complete all as specified and as diected. 85 M&L for cement concrete 1:7:12 type F2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed. 86 Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. 87 M&L for 100 mm thick cement concrete type-D-2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed. 88 M&L for sand filling under floors or in foundations incl watering and consolidation complete all as specified and as directed. 89 M&L for Machine pressed precast concrete interlocking paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade complete all as specified and as directed. 90 M&L for 50 mm thick cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and fair without using extra cement complete all as specified and as directed. 91 M&L non skid colouredcermic ENDURA tiles 400x400x15mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. 92 S & F 18 mm thick WPC board both side decorative fixed with screws, solvent cement/ adhesive/bolts to make kitchen cabinet sides top and bottom and shelves inside the cabinets etc. complete as per specifications and as directed. 93 S & F 16 mm thick WPC board of Single SidePrelam/ Rigidlam color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Density- 575 to 600 Kg/CBM) (Make- Rajshri Plastiwood 94 S & F 12 mm thickWPC boardofplain white(Matt finish) color fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in –charge- ( Density- 575 to 625 KG/CBM)(Make- Rajshri Plastiwood. 95 S&F in 100 mm sizealuminium anodised Hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed. 96 M&L for providing stainless steel handle 125mm complete all as specified and directed. 97 S & Fauto closing hinges 35 mm of 0 crank( KH-001)OR8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters -(Make- KAFF, Godrej & Hettich) 98 Taking down carefully aluminium / copper point wiring (light, fan, socket any type, power, bell etc.) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the materialfrom site and making good the disturbed surfaces of walls ceiling etc complete all as directed.(Note: Credit for above items should be made as per credit Schedule separately). 99 Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge. 100 Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrapincluding MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed. 101 M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, inuniversal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc or including sunk cast iron /pressed steel/terminal boxed for mounting flush typeswitches/sockets etc with 3 mm thick phenolic laminated sheet covers and including earth wire ofPVC insulated (FRLS) copper conductor multistrandedof 1.5Sqmmsize in green colourcomplete all asspecified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below (item no 104 to 108):- 102 a)One light/ fan point controlled by one way switch 5 amp complete. 103 c)One 3 pin 5 Amps socket point controlled by one way switch on same board. 104 d)One 3 pin 5 Amps socket point controlled by one way switch on independent board. 105 e)One bellpoint controlled by one push button. 106 f) One light point controlled by two 2-way switches. 107 All as per item No. 103 butfor 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed . 108 Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete. 109 Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module. 110 Supply and Fixing Modular switch16 Amp single pole one way,1 Module all as specified. 111 Supply & Fixing Modular fan Regulator electronic step type complete all as specified. 112 Supply and Fixing Modularsocket2-in-1, 5 pins 6 Amps , combined 2 Modulecomplete. 113 Supply and FixingModular socket 2-in-1,3 and5 pins 6 /16 Amps, combined 2 Module complete. 114 Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified. 115 S/F in replacement switch piano type , SP, one way, flush type 5 Amps complete all as specified. 116 S/F in replacement socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified. 117 S/F in replacement socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified. 118 S/F in replacement switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified. 119 S/F in replacement bell push siwtch piano flush type, SP, one way, 5 Amps complete. 120 Supply and fix in repair ceiling rose surface bakelite 65mm x 50mm three terminals complete. 121 Supply and fix in repair lamp holder, PVC / polycarbonate type with back plate. 122 Supply and fix in replacement mini MCB enclosure including DP 16 amp, type C curve complete. 123 Supply and fix in replacement Bell Ding dong type, 230 Volts complete with connection. 124 S/F in replacement fan Regulator piano flush type (Socket type as per existing), electronic step type complete all as specified. 125 M & L for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed(FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(Note: Two runs of 4 Sq mm (P&N),one run of 4 Sq mmearth wire & One run ofPVC casing and caping will be measured as one RM). 126 All as per Item No 127 but for 6 Sqmm 127 All as per Item No 127 but for 10 Sqmm 128 Supply & fix in repair indoor decorative ultra slim surface /Wall mounted LEDbatten tube light complete fitting 1x 20 watt LED Tube fitting withpolycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- relatedcolour temperature (CCT) of 6500K, >100 Lm/Wattcomplete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. 129 Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LEDbatten tube light complete fitting 1x10 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- relatedcolour temperature (CCT) of 6500K,>100Lm/Wattcomplete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. 130 S&F in repair surface mounted bulk head LED light fitting, capacity 10 watt, opal diffuser, IP 65 protection complete with all accessories and connection complete all as specified and as directed.Make: Bajaj Cat part BIBWP10W LED or equivalent in Philips / Havells / Wipro 131 Supply and fix LED9 Wsuitable for normal holder(Base Cap B22 / E14) complete all as specified. 132 Supply and install in replacement of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainablewith heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- relatedcolour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280Vincluding all connections complete all as specified. 133 Supply & fix in repair recess type, 35/36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- relatedcolour temperature (CCT) of 6500K,complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge. 134 S&F in repair LED bed side light fitting, 3 watt, wall mounted with adjustable arm, On /Off inbuilt switch including connection complete.Make : Havells or equivalent to Philips / Bajaj / CGor as directed as per site 135 S&F in repair indoor wall mounted fitting, brushed nickel finishfixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts complete Make: Havells cat part No LHFOAJE1TZ1I060 136 S&F in repair LED post top light fitting 30W IP-65 rated completeall as specified and directed. Make: Surya Cat part No SLE PT 30W-ETPP or equivalent. 137 S&F in repair LED Round/square recess mounted slim downlighter 12 watt, integrated electronic driver, co- relatedcolour temperature (CCT) of 6500K complete all as specified. 138 All as per Item No 35 but for 18 Watt 139 M&L for building securitylight bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubularpole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description. 140 S&F in replacement MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted withbus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified. 141 All as per Item No 142 but for 8 Way 142 All as per Item No 142 but for 4 Way 143 Supply & fix in replacementMCB SPN63 Amps, C series , bracking cap10KA, 240V complete. 144 Supply & fix in replacement of MCB SPN40 Amps, C series , bracking cap 10KA, 240V complete. 145 Supply & fix in replacement of MCB SPN6-32 Amps, C series , bracking cap 10KA, 240V complete. 146 Supply & fix in replacement of MCB SP 6-32 Amps, C series ,bracking cap 10KA, 240V complete. 147 Supply and fix in replacement SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Voltswith all connection complete all as specified and directedMake : Havellsor equivalent of Legrand /L&T/ C&S 148 Supply & fix in replacement metal clad SPN plug top 20 Amp for fixing on AC Box complete. 149 Supply and fix modular MCB DP 16 Amp, C series, 240 V complete all as specified and directed. 150 S&F in repair Plastic Surface mounting box 1 / 2 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge. 151 S&F in repair Plastic Surface mounting box 3 / 4 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge. 152 S&F in repair Plastic Surface mounting box 6 / 8 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge. 153 Supply & replacement of3 mm thicklaminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch / socket and complete connection all as directed.Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately 154 Supply & replacement of3 mm thicklaminated mica sheet top cover suitable for switch board 8 way to 12 way including removing & re-fixing of existing switch / socket and complete connection all as directed.Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately. 155 S&F in repair LED bollard light fitting 10 W, with PC diffuser, made up of MS pipe,IP-65 rated, inetgrated electronic driver, energy efficient complete with all accessories and connection, internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size all as specified and directed. 156 M&L forModular metalflush box 1/2 Module complete all as specified and directed. 157 M&L forModular metalflush box 3 Module complete all as specified and directed. 158 M&L forModular metalflush box4 Module complete all as specified and directed. 159 M&L forModular metalflush box6 Module complete all as specified and directed. 160 M&L forModular metalflush box8 Module complete all as specified and directed. 161 M&L for modular white cover plate with frame, 1 / 2module complete all as specified and directed. 162 M&L for modular white cover plate with frame, 3 module complete all as specified and directed. 163 M&L for modular white cover plate with frame, 4 module complete all as specified and directed. 164 M&L for modular white cover plate with frame, 6 module complete all as specified and directed. 165 M&L for modular white cover plate with frame, 8 module complete all as specified and directed. 166 M&L for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Casing and Caping and its all accessories of suitable size on wall/roof surfaces ( making good all to the disturbed surfaces as per existing) including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing includinggang box / 2.0mm thick MS terminal box as per site requirement for fixing switches, sockets, fan regulators etcfixed to wall with 3mm thick laminated sheet top cover complete all as specified forfor item no 169, 170 and 171:- 167 a)One light point/ fan point / bell pointcontrolled by one switch 168 b)One 3 pin 5 Amps socket point controlled by one way switch on same board. 169 c)One 3 pin 5 Amps socket point controlled by one switch on independent board 170 All as per item No. 168 here-in-before but with 4.0 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge. 171 S/F switch piano type , SP, one way, flush type 5 Amps complete all as specified. 172 S/F socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified. 173 S/F socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified. 174 S/F switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified. 175 S/F fan Regulator piano flush type, electronic step type complete all as specified. 176 Supply and Fixing in repair modular switch 6 Amps single pole one-way, 1 Module complete. 177 Supply and Fixing in repair Modular switch16 Amp single pole one way,1 Module all as specified. 178 Supply & Fixing in repair modular fan Regulator electronic step type complete all as specified. 179 Supply and Fixing in repair modularsocket2-in-1, 5 pins 6 Amps , combined 2 Modulecomplete. 180 Supply and Fixingin repair modular socket 2-in-1,3 and5 pins 6 /16 Amps, combined 2 Module complete all as specified. 181 S&F in repiar Modular AC Box Plastic enclosure, heavy duty with single pole MCB 20 amps c series and plug top complete as directed.Make: Anchor Cat part No 98488 or equivalent 182 Supply & fix in replacement of indoor wall mounted fitting, brushed nickel finish fixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts-02 Nos all as directed at site. Make:-Havells Cat Part No. FLORETINE WL 2LS B22 SS or equivalent make in Crompton/ Philips C&S. 183 Taking down carefully service connection of any type complete all as directed by Engineer-in-Charge. 184 Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out all as specified and as directed by Engr-In-Charge. 185 Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all asspecified. 186 Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified. 187 Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panelfrom pole / Main Panel Box and testing complete all as specified and directed of following (ITEM NO 189-190) sizes :-Note:- HDPE pipe rate shall be deemed in quoted rate above. 188 LT XLPE cable size 10 sq mm 2 core 189 LT XLPE cable size 16 sqmm 4 core 190 Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed. 191 Supply & fix in replacement of MCB TPN40 to 100 Amps, C series , bracking cap 10KA, 415V complete including taking down old MCBsall as specified and directed. 192 S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted withbus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connections complete all as specified and directed.Note : -MCB & MCB /MCCB DBs shall be of same make and measured and paid seperately under respective items of Sch A. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items. 193 Supply & fix in replacement of MCCB250 Amps, thermal magnetic based adjustable type, breaking cap 36 KA, 4 Pole, 415V complete including taking down old MCBsall as specified and directed. 194 Supply & fix in replacement of MCCB160 Amps, breaking cap 25 KA,4 Pole, 415V complete including taking down old MCBs all as specified and directed. 195 Supply & fix in replacement of MCCB125 Amps, breaking cap16 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed. 196 S&F in repair driver suitable for existing LED panel light fittings, 36 watt as directed. 197 S&F in repair driver suitable for existing LED down light fittings 15 watt as directed. 198 Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i)GIearth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii)Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer)(iii)4 mm GI wire from earth plate to MCB DB/machineryincluding necessary GI bolts, nuts check , washers, thimbles etc.(iv)20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit.(v)15 mm dia bore G. I. medium grade pipe for protection of earth wire.(vi)Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit.(vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.
Contract Date: Dec 22, 2025 Contract Value : 33.95 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Uttar Pradesh View Result →
20.
Petroleum and Natural Gas #8436902 AOC
Annual Rate Contract For Civil And Other Miscellaneous Maintenance Works At Wrpl Beawar And Sendra Station=10 NRECIV0001: Cleaning mosaic floor with Carborundum block stone, oxalic acid and caustic soda for all heights of all patches, spots a nd polishing with Mansion polish with all tools, tackles, consumables, materials & labour all complete. 20 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 30 NRECIV0003: Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI grade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes / Finit in required proportion to make the a rea clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall b e measured). 40 NRECIV0004: Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water wi th wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete as per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with clea ning powder,paint remover as per requirement all labour, material etc.complete. 50 NRECIV0005: Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, c leaning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with all labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 60 NRECIV0006: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane not exceeding 1.00 sq.m in area 70 NRECIV0007: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane exceeding 1.00 sq.m in area 80 NRECIV0008: Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Exec utive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, segregate the waste into biodegradable & non bio-degradeable waste and finally dispose themseparately at designated place (Dumping Yard/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc . complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to wo rkmen, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engi neer-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepe rately. The unit MONTH (MON) shall mean per house/building per month 90 NRECIV0009: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain upto 2.0 sqm. 100 NRECIV0010: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 2.0 sqm. and upto 4.0 sqm. 110 NRECIV0011: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 4.0 sqm. and upto 10.0 sqm. 120 NRECIV0012: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 10.0 sqm and upto 15.0 sqm. 130 NRECIV0013: Labour charges for cleaning and dechoking of the nahani trap, gully trap and inspection chambers alongwith the CI and S W pipe connection of house drainage including flushing, removal of sludge muck outside all labour, tools etc. complete. The contract or has to clean the line from Nahani trap upto inspection chamber or vice-versa complete. 140 NRECIV0014: Cleaning and removing choking from existing rain water pipe including removing the shoe or grating if necessary & fixin g the same without damaging & fitting of specials all labour etc.complete. Up to 5 mtr. Height 150 NRECIV0015: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth upto 2.0 M 160 NRECIV0016: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 170 NRECIV0017: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 3.0M 180 NRECIV0018: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth upto 2.0 M 190 NRECIV0019: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 200 NRECIV0020: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 3.0M 210 NRECIV0021: Cleaning dechoking and flushing inspection chambers and connected drain lines with drain cleaning rods, bamboos, compres sed air, steaming etc. removal of oily muck outside the chamber completed upto 100M lead. The item includes transportation of all ma chinery and plants, all labour, tools etc. complete, taking all necessary safety precautions as specified. Water at one point shall be supplied free of cost, hire charges for compressed air shall be paid separately if required. 220 NRECIV0022: Cleaning, dechoking and flushing 100mm/ 50mm SW and sewer line by removing muck, cleaning etc. with bamboo strips or sew er cleaning rods etc. as directed (section between two chambers) all complete including cleaning of two manholes as per direction of the Engineer-in-Charge. 230 NRECIV0025: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Upto a lead of 1 km 240 NRECIV0026: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 1 km but upto 2 km 250 NRECIV0027: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 2 km but upto 3 km 260 NRECIV0028: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Upto a lead of 50 m. 270 NRECIV0029: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. 280 NRECIV0030: Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driv er, fuel and other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Eng ineer-in-Charge.(8 hours working period of one tractor is considered as one tractor day). Unit EACH (EA) stands for tractor days. 290 NRECIV0031: Edging with common burnt clay F.P.S. (non modular) bricks of class designation 7.5, laid dry length wise, including requ ired excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50m. 300 NRECIV0038: Providing comprehensive pest control services to the building, sheds, cable trenches, drains and other facilities of th e establishment, to control the nuisance of various pests including (but not limited to) rodents, snakes, lizards, beehives, cockroa ches, mosquitoes, Red and Black ants, crawling pests, house flies, fruit flies, etc. Job includes placing / injecting rodenticide ba its, glue trays, snake repellent and other chemicals, insecticides, Fogging/fumigation, Removal of bee hives below ground (in trench es upto depth of 1m) and above ground (up to height of 15m), complete with all labours, materials, tools, and tackles, equipments, c onsumables etc complete. Periodicity of scheduled pest control activities shall be monthly, while ad hoc requirement shall be as and when required as directed by EIC whose decision shall be final. Area of measurement for pest control application shall be designate d by EIC. Rate is For (PER SQM PER MONTH) 310 NRECIV0039: Lifting, shifting, loading, unloading on of heavy equipment / material etc etc with the help of hydra/crane etc (Min 12T ) including all accessories like belt, sling etc as per directions of EIC/ Site- Engineer. (Unit EA shall mean carrying out abov e activities for 8 hrs. a day). 320 NRECIV0040: Hire and running charges of loader. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 330 PJEALU2634: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubul ar sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM ru bber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever require d including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per arc hitectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separat ely] : 340 PJEALU2636: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 350 PJEALU2637: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 360 PJEALU2638: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 370 PJEALU2639: For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixi ng of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fittings shall be paid for sepa rately] : 380 PJEALU2640: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 390 PJEALU2641: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 400 PJEALU2642: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 410 PJEALU2650: Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, havin g brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cut ting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. : 420 PJEALU2651: With stainless steel cover plate minimum 1.25 mm thickness 430 PJEALU2652: With brass cover plate minimum 1.25 mm thickness 440 PJEALU2685: Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by pr oviding weather/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and dir ections of the Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 : 450 PJEALU2686: Up to 5 mm depth and 5 mm width 460 PJEALU2687: Up to 10 mm depth and 10 mm width 470 PJEALU2688: Up to 20 mm depth and 20 mm width 480 PJEALU2689: Providing and fixing, on fixed glazing/ doors/ window panes, sun control film HP NATURAL 35 SAFETY COMBINATION FILM-4Mi l of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturers specification and as per directions of the Engineer-in-Charge. 490 PJECLA0192: Marble work gang saw cut (polished and machine cut) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marb le of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 ceme nt : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment t o match the marble shade [Note: To be secured to the backing by means of cramps, which shall be paid for separately] : 500 PJECLA0193: Area of slab up to 0.50 sqm 510 PJECLA0194: Area of slab over 0.50 sqm 520 PJECLA0195: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 530 PJECLA0196: Area of slab up to 0.50 sqm 540 PJECLA0197: Area of slab over 0.50 sqm 550 PJECLA0198: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone sl ab of colour black, Cherry/Ruby red for kitchen platforms, vanity counters, window sills, facias and similar locations of required s ize, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with जोधर्पुर matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 560 PJECLA0199: Area of slab up to 0.50 sqm 570 PJECLA0200: Area of slab over 0.50 sqm 580 PJECLA0201: Providing edge moulding to 18 mm thick Marble/ Granite stone counters, Vanities etc., including machine polishing to edg e to give high gloss finish etc. complete as per design approved by the Engineer-in-Charge : 590 PJECLA0202: Marble work 600 PJECLA0203: Granite work 610 PJECLA0206: Mirror polishing on Marble work/ Granite work/ Stone work wherever required to give high gloss finish complete. 620 PJECLA0220: Providing and fixing machine cut, mirror/ eggshell polished Italian Marble stone slab (Perlato, Rosso verona, Fire Red o r Dark Emperadore etc.) of 18 mm thickness for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 c ement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 Kg/sq.m. including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directe d by the Engineer-in-Charge : 630 PJECLA0221: Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional h eight of 3 m or part thereof. 640 PJECLA0222: TILE WORK IN CLADDING : 650 PJECLA0223: Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the ma nufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-i n-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. 660 PJECON0069: CEMENT CONCRETE (CAST IN-SITU) : 670 PJECON0070: Providing and laying in position cement concrete of specified grade at all depths including ramming & shuttering etc. c omplete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directio n of Site Engineer: 680 PJECON0071: 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal siz e derived from natural sources] 690 PJECON0072: 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources] 700 PJECON0074: 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size de rived from natural sources] 710 PJECON0078: Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) deriv ed from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] laid to proper level & line incl uding providing shuttering & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per sq uare metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications a nd direction of Site Engineer. 720 PJECON0080: Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal siz e, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specificatio ns and directions of the Engineer-in-Charge. 730 PJECON0082: Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manuf acturers specification. [Note: Unit KG shall mean PER BAG OF 50 KG OF CEMENT]. 740 PJECON0085: Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centerin g, shuttering and finishing: 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 2 0 mm nominal size derived from natural sources] 750 PJECON0087: Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, ancho r blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mort ar 1:3 (1 cement : 3 coarse sand), cost of required centering complete: 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources] 760 PJECON0088: Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] 770 PJEDIS1159: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per th e directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same s hall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] : 780 PJEDIS1160: Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 790 PJEDIS1161: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 800 PJEDIS1162: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mat erial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift o nly & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be d one prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge] 810 PJEDIS1163: Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mate rial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of n ecessary covers/ barricades around the work area shall be done prior to dismantling operations] 820 PJEDIS1164: Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work as per direction of the Engine er-in-Charge. [Notes: (1) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by th e Engineer-in-Charge. (2) Payment shall be made on the cross sectional area of R.C.C. or R.B. work] 830 PJEDIS1165: Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. 840 PJEDIS1166: Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and d isposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall b e allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades aro und the work area shall be done prior to dismantling operations] 850 PJEDIS1168: Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable materi al and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. 860 PJEDIS1171: Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc . complete and stacking within 50 metres lead : 870 PJEDIS1172: Of area 3.0 sq. metres and below 880 PJEDIS1173: Of area beyond 3.0 sq. metres 890 PJEDIS1177: Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in : 900 PJEDIS1178: Rolled Steel Joists 910 PJEDIS1179: Channels, angles, tees and flats 920 PJEDIS1181: Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 me tres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantlin g operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge .] 930 PJEDIS1185: Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : 940 PJEDIS1186: For thickness of tiles 10 mm to 25 mm 950 PJEDIS1187: For thickness of tiles above 25 mm and up to 40 mm 960 PJEDIS1188: Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unservicea ble material within 50 metres lead. 970 PJEDIS1190: Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable ma terial within 50 metres lead. 980 PJEDIS1191: Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 990 PJEDIS1192: Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of : 1000 PJEDIS1193: G.S. Sheet 1010 PJEDIS1194: Asbestos Sheet 1020 PJEDIS1198: Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 1030 PJEDIS1200: Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : 1040 PJEDIS1201: Thickness up to 40 mm 1050 PJEDIS1202: Thickness above 40 mm up to 75 mm 1060 PJEDIS1204: Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres l ead : 1070 PJEDIS1205: 75 to 80 mm dia pipe 1080 PJEDIS1206: 100 mm dia pipe 1090 PJEDIS1207: 150 mm dia pipe 1100 PJEDIS1208: Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable mater ial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift onl y & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be don e prior to dismantling operations.(3) Adequate safety precautions shall also be taken care before commencement of any activity] : 1110 PJEDIS1209: Water Bound Macadam Road 1120 PJEDIS1210: Bituminous Road 1130 PJEDIS1211: Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1140 PJEDIS1212: 15 mm to 40 mm nominal bore 1150 PJEDIS1213: Above 40 mm nominal bore 1160 PJEDIS1214: Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical m eans breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per the directions of Engineer-in-Charge : 1170 PJEDIS1215: Up to 150 mm diameter 1180 PJEDIS1216: Above 150 mm dia up to 300 mm dia 1190 PJEDIS1217: Above 300 mm diameter 1200 PJEDIS1221: Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manual ly/ by mechanical means and stacking the pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1210 PJEDIS1222: Up to 150 mm diameter 1220 PJEDIS1223: Above 150 mm diameter 1230 PJEDIS1224: Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metre s lead as per the directions of Engineer-in-Charge. 1240 PJEDIS1228: Dismantling of flushing cistern of all types (C.I./ PVC/ Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 1250 PJEDIS1232: Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 1260 PJEDIS1233: Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1270 PJEDIS1234: Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservic eable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. 1280 PJEDIS1237: Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for all leads including all lifts involved. 1290 PJEDRA2505: Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Kg 1300 PJEDRA2506: Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : 1310 PJEDRA2507: Light Duty-2.5 : 1320 PJEDRA2508: Rectangular shape 600x450 mm internal dimensions 1330 PJEDRA2509: Square shape 450 mm internal dimensions 1340 PJEDRA2510: Circular shape 450 mm internal diameter 1350 PJEDRA2511: Medium Duty-10 : 1360 PJEDRA2512: Square shape 450 mm internal dimensions 1370 PJEDRA2513: Circular shape 500 mm internal diameter 1380 PJEDRA2514: Heavy Duty-20 : 1390 PJEDRA2515: Circular shape 560 mm internal diameter 1400 PJEDRA2516: Extra Heavy Duty-35 : 1410 PJEDRA2517: Circular shape 560 mm internal diameter 1420 PJEDRA2518: Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both si des with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels fo r the drain etc. complete : 1430 PJEDRA2519: For pipes 100 to 250 mm diameter 1440 PJEDRA2520: For pipes 250 to 300 mm diameter 1450 PJEDRA2521: For pipes 350 to 450 mm diameter 1460 PJEDRA2550: Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floor s, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materi als, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 1470 PJEDRA2551: Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure coppe r floats, complete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications a nd directions of the Engineer-in-Charge. 1480 PJEDRA2553: Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid over a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) i ncluding making haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat c ement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per s tandard design and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling , curing etc., as per specifications and directions of the Engineer-in-Charge. 1490 PJEDRA2588: Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL shall mean KILO LITRE] 1500 PJEDRA2589: Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, a ll as per the directions of Engineer-in-Charge. 1510 PJEDRA2590: Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting s ewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including ski lled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking an d flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up t o 300 mm dia for all depth. 1520 PJEEAR0002: Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) i n all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Ch arge. 1530 PJEEAR0004: Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including trimming of sides of the trenches, dressing, ramming and levelling the bottom of the trenches correct to level, grade etc. including filling in sid es of foundation trenches, plinth etc. with the excavated earth available and/or depositing the excess earth within station area l imits, in layers not exceeding 20 cms. thick, consolidating each deposited layer by ramming, watering, dressing to level and grade , complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tion of Site Engineer. 1540 PJEEAR0005: In all kinds of soil 1550 PJEEAR0006: In Ordinary rock 1560 PJEEAR0009: Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractors own borrow areas including royalty, with all leads and lifts in trenches, plinth, sides of foundation etc. including watering, compacting in layers not exceed ing 20cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specif ications and direction of Site Engineer. 1570 PJEEAR0011: Supplying and filling coarse sand under floors, in foundations and plinth including cost-of sand, royalty, transportatio n, loading , unloading, spreading in layers not exceeding 20 cm., watering, ramming, compacting, dressing and levelling etc. compl ete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. 1580 PJEEAR0013: Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & floor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the building shall be measured for payment]. 1590 PJEEAR0014: Supplying chemical emulsion (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) in sealed containers including deli very as specified. 1600 PJEEAR0015: Diluting and injecting chemical emulsion (Chlorpyriphos/ Lindane E.C. 20% with 1% concentration) for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 1610 PJEEAR0016: Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete : 1620 PJEEAR0017: Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. : 1630 PJEEAR0020: Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based soluti on) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same : 1640 PJEEAR0021: Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measu red at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 1650 PJEEAR0022: Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 1660 PJEEAR0023: Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, r emoving the roots and stacking of serviceable material and disposal of unserviceable material : 1670 PJEEAR0024: Beyond 30 cm girth upto and including 60 cm girth 1680 PJEEAR0025: Beyond 60 cm girth upto and including 120 cm girth 1690 PJEEAR0026: Beyond 120 cm girth upto and including 240 cm girth 1700 PJEEAR0027: Above 240 cm girth 1710 PJEEAR0028: Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to designated location/ approved municiple dumping ground for lead up to 10 Km and for a ll lifts, complete as per directions of the Engineer-in-Charge. [Note: This item shall also be applicable in urban areas having dire ctions for restricted hours for movement/ plying of load carrying motor vehicles of 3.5 cum or more.] 1720 PJEEAR0030: Excavating trenches by mechinical / manual means of required width in all kinds of soil for pipes, cables, etc. includin g excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and th en returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : 1730 PJEEAR0031: Pipes, cables etc. not exceeding 80 mm dia. 1740 PJEEAR0032: Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 1750 PJEEAR0033: Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 1760 PJEEAR0034: Excavating trenches of required width in ordinary rock for pipes, cables, etc. including excavation for sockets, getting out the excavated materials, returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. , stacking servicable materials for measurements and disposal of unservicable materials, all work up to any lead & lift as directed by the Engineer-in-Charge : 1770 PJEEAR0035: Trench depth upto 1.5m : 1780 PJEEAR0036: Pipes, cables etc. not exceeding 80 mm dia 1790 PJEEAR0037: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1800 PJEEAR0038: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1810 PJEEAR0039: Trench depth exceeding 1.5 m but not exceeding 3 m: 1820 PJEEAR0040: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1830 PJEEAR0041: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1840 PJEEAR0042: Trench depth exceeding 3 m but not exceeding 4.5 m: 1850 PJEEAR0043: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1860 PJEEAR0066: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceedin g 20 cm in depth, consolidating each deposited layer by ramming and watering, all works up to any lead and lift 1870 PJEFIN0898: CEMENT PLASTER (IN FINE SAND) : 1880 PJEFIN0899: 12 mm cement plaster of mix : 1890 PJEFIN0900: 1:4 (1 cement : 4 fine sand) 1900 PJEFIN0901: 1:6 (1 cement : 6 fine sand) 1910 PJEFIN0905: 20 mm cement plaster of mix : 1920 PJEFIN0906: 1:4 (1 cement : 4 fine sand) 1930 PJEFIN0907: 1:6 (1 cement : 6 fine sand) 1940 PJEFIN0908: CEMENT PLASTER (IN COARSE SAND) : 1950 PJEFIN0909: 12 mm cement plaster of mix : 1960 PJEFIN0910: 1:4 (1 cement : 4 coarse sand) 1970 PJEFIN0911: 1:6 (1 cement : 6 coarse sand) 1980 PJEFIN0915: 20 mm cement plaster of mix : 1990 PJEFIN0916: 1:4 (1 cement : 4 coarse sand) 2000 PJEFIN0917: 1:6 (1 cement : 6 coarse sand) 2010 PJEFIN0918: CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 2020 PJEFIN0919: 12 mm cement plaster finished with a floating coat of neat cement of mix : 2030 PJEFIN0920: 1:3 (1 cement : 3 fine sand) 2040 PJEFIN0921: 1:4 (1 cement : 4 fine sand) 2050 PJEFIN0925: Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement : 2060 PJEFIN0926: 12 mm cement plaster 2070 PJEFIN0927: 20 mm cement plaster 2080 PJEFIN0942: Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufactu rers [Note: Unit BAG shall mean PER BAG OF 50 KG CEMENT USED IN THE MIX). 2090 PJEFIN0943: Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or par t thereof. 2100 PJEFIN0944: Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and s mooth complete. 2110 PJEFIN0945: Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Colum ns/ Beams brickwork as directed by the Engineer-in-Charge. 2120 PJEFIN0963: Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved ma nufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and inc luding water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 2130 PJEFIN0964: EXTERIOR FINISHING : 2140 PJEFIN0965: Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 Kg/10 sq m) 2150 PJEFIN0966: Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 2160 PJEFIN0967: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2170 PJEFIN0968: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2180 PJEFIN0969: Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifica tions : 2190 PJEFIN0970: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm 2200 PJEFIN0971: Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. 2210 PJEFIN0972: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm ov er an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. 2220 PJEFIN0973: Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon ad ditives: New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 2230 PJEFIN0974: Applying priming coat : 2240 PJEFIN0975: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 2250 PJEFIN0976: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 2260 PJEFIN0977: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) 2270 PJEFIN0978: Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specification s including appropriate priming coat, preparation of surface, etc. complete : 2280 PJEFIN0979: On steel work 2290 PJEFIN0980: On concrete work 2300 PJEFIN0981: Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : 2310 PJEFIN0982: 75 mm diameter pipes 2320 PJEFIN0983: 100 mm diameter pipes 2330 PJEFIN0984: 150 mm diameter pipes 2340 PJEFIN0985: Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats) 2350 PJEFIN0986: Providing and applying two coats of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat inclu ding preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 2360 PJEFIN0987: Coal tarring two coats on new work using 0.16 Litre and 0.12 Litre coal tar per sqm in the first coat and second coat re spectively. 2370 PJEFIN0988: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2380 PJEFIN0989: Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2390 PJEFIN0990: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or mor e coats on new work 2400 PJEFIN0991: Varnishing with varnish of approved brand and manufacture : 2410 PJEFIN0992: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish 2420 PJEFIN0993: Two or more coats glue sizing with spar varnish or an under coat of flatting varnish 2430 PJEFIN0996: Lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HEIGH T]. 2440 PJEFIN0997: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2450 PJEFIN0998: Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litr e, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Old work (one or more coats) 2460 PJEFIN0999: Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : 2470 PJEFIN1000: One coat 2480 PJEFIN1001: Two coats 2490 PJEFIN1002: Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour : 2500 PJEFIN1003: One coat 2510 PJEFIN1004: Two coats 2520 PJEFIN1005: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content : 2530 PJEFIN1006: With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 2540 PJEFIN1007: With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. 2550 PJEFIN1008: Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair s to scratches etc. complete. 2560 PJEFIN1009: Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2570 PJEFIN1010: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 2580 PJEFIN1011: 75 mm diameter pipes 2590 PJEFIN1012: 100 mm diameter pipes 2600 PJEFIN1013: 150 mm diameter pipes 2610 PJEFIN1014: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of appro ved brand and manufacture and required colour on old work : 2620 PJEFIN1015: 75 mm diameter pipes 2630 PJEFIN1016: 100 mm diameter pipes 2640 PJEFIN1017: 150 mm diameter pipes 2650 PJEFIN1018: Painting with oil type wood preservative of approved brand and manufacture : Old work (one or more coats) 2660 PJEFIN1019: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 2670 PJEFIN1020: Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work 2680 PJEFIN1021: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : One or mor e coats on old work 2690 PJEFIN1022: French spirit polishing : One or more coats on old work 2700 PJEFIN1023: Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work 2710 PJEFIN1024: Re-lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HE IGHT]. 2720 PJEFIN1025: Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 2730 PJEFIN1026: Finishing walls with water proofing cement paint of required shade : 2740 PJEFIN1027: Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete i ncluding cost of Priming coat. 2750 PJEFIN1028: Old work (one or more coats applied @ 2.20 kg/10 sqm) complete. 2760 PJEFIN1029: Finishing walls with textured exterior paint of required shade 2770 PJEFIN1030: Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 2780 PJEFIN1031: Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 2790 PJEFIN1032: Finishing walls with Acrylic Smooth exterior paint of required shade : 2800 PJEFIN1033: Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface. 2810 PJEFIN1034: Old work (One or more coat applied @ 0.90 ltr/10 sqm) 2820 PJEFIN1035: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : 2830 PJEFIN1036: Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 2840 PJEFIN1037: Old work (one or more coats applied @ 0.83 ltr/10 sqm) 2850 PJEFIN1038: Varnishing with varnish of approved brand and manufacture : 2860 PJEFIN1039: One or more coats with copal varnish 2870 PJEFIN1040: One or more coats with spar varnish 2880 PJEFIN1041: Melamine polishing on wood work (one or more coat). 2890 PJEFIN1042: Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 2900 PJEFIN1043: Providing Plaster of Paris coating on ceiling as per approved design complete in all respects inclusive of cost of all l abour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 2910 PJEFLO0706: FLOORING : 2920 PJEFLO0707: Brick on edge flooring with bricks of class designation 7.5 on bed of 12 mm cement mortar, including filling the joint s with same mortar, with common burnt clay non modular bricks : 2930 PJEFLO0708: 1:4 (1 cement : 4 coarse sand) 2940 PJEFLO0709: 1:6 (1 cement : 6 coarse sand) 2950 PJEFLO0710: Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, includ ing filling joints with sand, with common burnt clay non modular bricks. 2960 PJEFLO0711: Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class desig nation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 2970 PJEFLO0712: Providing and laying cement concrete flooring 25 mm thick of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreg ates 12.5 mm nominal thickness), laid monolithically over base of concrete in panels at all locations and heights including treads o f steps, nosing, landing slab etc. and finished with a floating coat of neat cement @ 2.20 Kg of cement per sqm of flooring, supplyi ng and fixing 1.5 mm thick aluminium strips for full depth, chequering in floor finish if required, rounding, sloping, curing, finis hing, preparation of slab, steps, etc., complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. [Note: Payment for base concrete shall be made under relevant item]. 2980 PJEFLO0713: 40 mm thick cement concrete Flooring with P.C.C. of grade mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of step s etc. complete : 2990 PJEFLO0714: Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener c onsisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 li tre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosi ng of steps etc. complete. 3000 PJEFLO0715: 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 ( 1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cemen t or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. comple te. 3010 PJEFLO0716: Providing and laying 52 mm thick cement concrete flooring with metallic hardner topping, under layer of 40 mm thick ceme nt concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 12 mm thick metallic con crete hardner consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compoun d such as IRONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of met allic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications and directions of the Engineer-in-Charge. 3020 PJEFLO0722: TILE FLOORING : 3030 PJEFLO0723: Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) : 3040 PJEFLO0724: Light shade pigment using white cement 3050 PJEFLO0725: Medium shade pigment using 50% white cement 50% Grey cement 3060 PJEFLO0726: Dark shade pigment using ordinary cement 3070 PJEFLO0727: Ordinary cement without any pigment 3080 PJEFLO0728: Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make & colour using acid and/or alkali r esisting mortar bedding and filling joints with acid and/or alkali resisting cement as per IS:4457, all complete as per specifcation s and directions of the Engineer-in-Charge : 3090 PJEFLO0729: In flooring on a bed of 10 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3100 PJEFLO0730: In dado/ skirting on 12 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3110 PJEFLO0731: MARBLE STONE FLOORING : 3120 PJEFLO0732: Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by the Engineer-in-Charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 3130 PJEFLO0733: Makrana White Second Quality 3140 PJEFLO0734: Raj Nagar Plain 3150 PJEFLO0735: Agaria White 3160 PJEFLO0736: Black Zebra 3170 PJEFLO0737: Udaipur Green Marble 3180 PJEFLO0738: Pink Plain Marble 3190 PJEFLO0742: Providing and laying machine cut, mirror polished, 18 mm thick Italian Marble Stone slab (Perlato, Rosso verona, Fire Re d or Dark Emperadore, etc.) flooring laid in required pattern in linear portion of the building all complete as per architectural dr awings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jo inted with white cement slurry @ 4.4 Kg/sq.m., including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 3200 PJEFLO0743: Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstrac t etc.) and in patterns in combination with Italian marble stone slabs (Perlato, Rosso verona, Fire Red or Dark Emperadore, etc.) of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectu ral drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 Kg/sq.m. including pointing with white cement slurry admixed with pigment to match the ma rble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 3210 PJEFLO0744: Providing and laying natural Rajnagar White Marble tile strips 50 mm wide in flooring/ stairs laid over 20 mm thick ceme nt mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per d rawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3220 PJEFLO0745: GRANITE STONE FLOORING : 3230 PJEFLO0746: Providing and laying flamed finish Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) floori ng in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointe d with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and poli shing etc. all complete as specified and as directed by the Engineer-in-Charge. 3240 PJEFLO0747: Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear p ortions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base o f cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed wit h pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer- in-Charge. 3250 PJEFLO0748: Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 3260 PJEFLO0749: Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red 3270 PJEFLO0750: Providing and laying natural granite stone tile strips 50 mm wide in flooring of approved shade laid over 20 mm thick ce ment mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3280 PJEFLO0761: VITRIFIED FLOOR TILES : 3290 PJEFLO0762: Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mort ar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement a nd matching pigments etc., complete : 3300 PJEFLO0763: Size of Tile 500x500 mm 3310 PJEFLO0764: Size of Tile 600x600 mm 3320 PJEFLO0765: Size of Tile 800x800 mm 3330 PJEFLO0766: Size of Tile 1000x1000 mm 3340 PJEFLO0767: Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, includin g grouting of joints. [Note: Payment for grouting of joints shall be made separately] : 3350 PJEFLO0768: Size of Tile 500x500 mm 3360 PJEFLO0769: Size of Tile 600x600 mm 3370 PJEFLO0770: Size of Tile 800x800 mm 3380 PJEFLO0771: Size of Tile 1000x1000 mm 3390 PJEFLO0772: Providing and laying Double Charge Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by th e Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours an d shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. L aying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3400 PJEFLO0773: Size of Tile 600 x 600 mm 3410 PJEFLO0774: Size of Tile 600 x 1200 mm 3420 PJEFLO0775: Size of Tile 800 x 800 mm 3430 PJEFLO0776: Size of Tile 800 x 1600 mm 3440 PJEFLO0777: Size of Tile 1000 x 1000 mm 3450 PJEFLO0778: Providing and laying Glazed Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by the Manuf acturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shade s, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including groutin g the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying o f tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placin g the tiles gently and easily : 3460 PJEFLO0779: Size of Tile 600 x 600 mm 3470 PJEFLO0780: Size of Tile 600 x 1200 mm 3480 PJEFLO0781: Size of Tile 800 x 800 mm 3490 PJEFLO0782: Size of Tile 800 x 1200 mm 3500 PJEFLO0783: Size of Tile 1200 x 1200 mm 3510 PJEFLO0784: Providing and laying Glazed Vitrified Tiles (Matt/ Antiskid finish) of specified sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including g routing the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. La ying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3520 PJEFLO0785: Size of Tile 600 x 600 mm 3530 PJEFLO0786: Size of Tile 600 x 1200 mm 3540 PJEFLO0787: Size of Tile 800 x 800 mm 3550 PJEFLO0788: Size of Tile 800 x 1200 mm 3560 PJEFLO0789: Size of Tile 1200 x 1200 mm 3570 PJEFLO0790: Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorpti on less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm th ick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete : 3580 PJEFLO0791: Size of Tile 500x500 mm 3590 PJEFLO0792: Size of Tile 600x600 mm 3600 PJEFLO0793: Size of Tile 800x800 mm 3610 PJEFLO0794: Size of Tile 1000x1000 mm 3620 PJEGEN2809: GENERAL WORKS : 3630 PJEGEN2816: Supply, installation, testing & commissioning of Turbo Roof Air Ventilators of Fan Size- 24 inch (neck/ throat dia.), Ve ntilator Diameter- 30 inch, Ventilator Base (FRP)- standard width 1.8m x dome height 750mm, Opening for ventilation dome- 860mm x 68 0mm x 608mm, thickness 2mm etc. complete in all respects and as per specifications and directions of the Engineer-in-Charge. 3640 PJEGEN2821: Providing and erecting 2.0 metre high temporary barricading at site; each panel of size 2.5m x 2.0m made of 40x40x6mm an gle iron or 50x50x3mm hollow MS tube posts/ horizontal members/ bracings covered with 1.63mm thick MS Sheet. The steel shall be fixe d with 30x5mm MS flat by suitable welding/ riveting. The panels shall be made so that gap of 50cm above the ground is available maki ng overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/ direction of E ngineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The ba rricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for da mages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be r emoved without prior approval of the Engineer-in-Charge. [Note: One time payment shall be made for providing barricading from start of work till completion of work including shifting. The barricading provided shall remain to be the property of the contractor on co mpletion of the work]. 3650 PJEGEN2824: Providing and laying Non-Woven Geo Textile Mat NW 300 made from high quality polypropylene fibres having mass of 300 gra ms/ SQ.M of GAYATRI or approved equivalent make inclusive of cost of all labour, materials, tools, tackles etc. as per manufacturer s recommendations and directions of the Engineer-in-Charge. 3660 PJEHOR2827: HORTICULTURE & LANDSCAPING : 3670 PJEHOR2828: Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of ea rth measured in stacks will be reduced by 20% for payment]. 3680 PJEHOR2829: Supplying and stacking sludge at site including royalty and carriage up to any lead complete. [Note: Volume of sludge me asured in stacks will be reduced by 8% for payment]. 3690 PJEHOR2830: Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [No te: Volume of cattle manure measured in stacks will reduced by 8% for payment]. 3700 PJEHOR2835: Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 3710 PJEHOR2836: Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material , consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR]. 3720 PJEHOR2837: Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling. [ Note: Cost of supplying earth and sludge or manure and mixing shall be paid separately under relevant items of SOR]. 3730 PJEHOR2838: Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then dispo sing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by fi lling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imported earth, sludge or manure]. 3740 PJEHOR2839: Rough dressing the trenched ground including breaking clods. 3750 PJEHOR2840: Flooding the ground with water including making kiaries and dismantling the same. 3760 PJEHOR2841: Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted veg etation. 3770 PJEHOR2844: Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with ro ots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 3780 PJEHOR2845: Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further dep th of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of sta cked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with w ater, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of material s declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete. [Note: Cost of sludge, manure or extra earth shall be paid for separately under relevant item of SOR]. 3790 PJEHOR2846: Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts. [Note: Cost of m anure, sludge or extra good earth if needed shall be paid separately under relevant item of SOR]. 3800 PJEHOR2847: Holes 1.2 m diameter and 1.2 m deep 3810 PJEHOR2848: Holes 90 cm diameter and 90 cm deep 3820 PJEHOR2849: Holes 60 cm diameter and 60 cm deep 3830 PJEHOR2850: Holes 45 cm diameter and 45 cm deep 3840 PJEHOR2851: Supplying & Stacking of Selection No.1/ Doob Grass at site fresh & free from weeds having proper roots in green includin g loading, unloading, carriage and all taxes paid etc. complete as per directions of the Engineer-in-Charge. 3850 PJEHOR2852: Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the gr ass forms a thick lawn, free from weeds and fit for mowing including supply and filling of good earth, if required during maintenanc e period. [Note: The grass and good earth shall be paid for separately under relevant item of SOR] : 3860 PJEHOR2853: In rows 5 cm apart in both directions 3870 PJEHOR2854: With grass Turf 3880 PJEHOR2855: Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with pro per level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the En gineer-in-Charge. 3890 PJEHOR2856: Providing & laying Selection No. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light wate ring the same maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Charge . 3900 PJEHOR2857: Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per directio n of the Engineer-in-Charge (excluding cost of plant & water): 3910 PJEHOR2858: Tree Plant 3920 PJEHOR2859: Shrub Plant 3930 PJEHOR2860: Hedge Plant/ Ground Cover 3940 PJEHOR2861: Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, As hokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days min imum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions o f the Engineer-in-Charge. 3950 PJEHOR2862: Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 c oarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wi res of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specifie d period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge. 3960 PJEHOR2863: Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm 3970 PJEHOR2864: Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm 3980 PJEHOR2873: Filling of the Polythene bags by mixture of good earth and manure in the ratio of 2:1 (2 part of Good Earth and 1 part o f the Manure) and placing the same at appropriate place including supply & providing Polythene bags, all complete as per direction o f the Engineer-in-Charge. [Note:The Good Earth & Manure shall be paid separately under relevant item of SOR]. 3990 PJEHOR2874: Polythene bags size 12.5 cm diameter & 17.5 cm height 4000 PJEHOR2890: Edging with common burnt clay F.P.S (non modular) bricks of class designation 7.5, laid dry length wise including requir ed excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within any lead. 4010 PJEHOR2894: Providing & fixing of White River (Stone) Pebbles size of 2 to 2.50 dia in natural colour at site of work including lo ading, unloading, carriage and all taxes paid etc.and as per directions of the Engineer-in-Charge. 4020 PJEHOR2895: Providing and fixing of TUFLEX Garden Fencing Hexagonal Net or approved equivalent of green colour (Weight 510 (+/-8%) g rams/SQ.M) in width of 60 cm with bamboo of 90 cm length. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm below ground level and 60 cm above ground level at a distance of 1.50 metres. The n et and bamboo should be binded with 2 mm G.I. wire at three places properly as per directions of the Engineer-in-Charge. 4030 PJEHOR2896: MAINTENANCE WORKS 4040 PJEHOR2897: Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing t he same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds an d fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or m anure. [Note: The good earth shall be paid for separately under relevant item of SOR]. 4050 PJEHOR2898: Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and a pplying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4060 PJEHOR2899: Cutting of designer hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manur ing and applying insecticides and fungicides etc. (excluding the cost of materials) complete as per directions of the Engineer-in-Ch arge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4070 PJEHOR2903: Pruning, trimming, shaping of trees/ shrubs (height 15 feet above) and removal of cut materials up to 50m lead inclusi ve of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 4080 PJEHOR2904: Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation water at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering inclu ding cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 4090 PJEHOR2905: Anti-termite treatment of trees by digging holes 30 cm deep & 4 cm dia, 6 to 7 holes around the tree using chemical emul sion (Chlorpyriphos 20% EC in the ratio of 1% concentration) at the rate of 1.5 liter per hole in two time or more application to ge t the trees free from termite infection, complete as per directions of the Engineer-in-Charge. [Note: Unit EA shall mean EACH TRE E]. 4100 PJEHOR2908: Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, deb ris, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per dire ction of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 4110 PJEHOR2909: Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km l ead & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP] . 4120 PJEMAS0143: MASONRY WORK : 4130 PJEMAS0144: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : 4140 PJEMAS0145: Cement mortar 1:4 (1 cement : 4 coarse sand) 4150 PJEMAS0146: Cement mortar 1:6 (1 cement : 6 coarse sand) 4160 PJEMAS0147: Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : 4170 PJEMAS0148: Cement mortar 1:4 (1 cement : 4 coarse sand) 4180 PJEMAS0149: Cement Mortar 1:6 (1 cement : 6 coarse sand) 4190 PJEMAS0150: Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth le vel up to floor V level in all shapes and sizes in : 4200 PJEMAS0151: Cement mortar 1:4 (1 cement : 4 coarse sand) 4210 PJEMAS0152: Cement mortar 1:6 (1 cement : 6 coarse sand) 4220 PJERAI2738: Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required th ickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4230 PJERAI2739: Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing lay er of boulders, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4240 PJERAI2740: Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4250 PJERAI2742: Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, o f size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all a s per directions of the Engineer-in-Charge. 4260 PJEREI0090: RCC (CAST IN-SITU) : 4270 PJEREI0091: Providing and laying structural reinforced cement concrete work (1:1.5:3) conforming to IS:456 (1 cement : 1.5 coarse sa nd : 3 graded stone aggregate 20 mm nominal size) at all heights and depth for construction of foundations, beams, columns, stairca ses, chajja,lintels, balconies, shelves, plain window sills, roof slabs, facia, canopies, fins, porch, water tank etc. including pro viding centering, shuttering, staging, scaffolding, form work etc compacting with mechanical vibrator, curing etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engin eer. (Payment for Reinforcement shall be made as per relevant item of SOR). 4280 PJEREI0092: a) All work up to plinth level 4290 PJEREI0093: b) In superstructure at all floors up to floor five level, 4300 PJEREI0106: Steel reinforcement for R.C.C. workincluding initial straightening of coiled/uncoiled bars, removal of loose rust, cutti ng, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. : Thermo-Mechanically Treated bars of grade Fe-500 D or more 4310 PJEREP1046: Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper sha pe, raking out joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable are a outside Ownders premises, all complete as per directions of the Engineer-in-Charge : 4320 PJEREP1047: With cement mortar 1:4 (1 cement : 4 fine sand) 4330 PJEREP1048: With cement mortar 1:4 (1 cement : 4 coarse sand) 4340 PJEREP1103: Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube ch allies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condi tion for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runn ers, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shal l be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be use d for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done] 4350 PJEREP1108: Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per the directions of Engineer-in-Charge. 4360 PJEREP1109: Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per the dir ections of Engineer-in-Charge. 4370 PJEREP1113: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer o f membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 350/3 00 N/5 cm. (b) Tear strength in longitudinal and transverse direction as 60/80N. (c) Softening point of membrane not less than 150°C . (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done thr ough the authorised applicator of the manufacturer of membrane. 4380 PJEREP1114: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 l itre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physic al and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C a s 650/450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less tha n 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got d one through the authorised applicator of the manufacturer of membrane. 4390 PJEREP1115: Extra for covering top of membrane with Geotextile, 120 GSM non woven, 100% polyester of thickness 1 to 1.25 mm bonded t o the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 4400 PJEREP1116: STRUCTURAL REPAIR WORKS : 4410 PJEREP1117: Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning t he exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as p er directions of the Engineer-in-Charge : 4420 PJEREP1118: 75 mm average thickness 4430 PJEREP1119: 50 mm average thickness 4440 PJEREP1120: 25 mm average thickness 4450 PJEREP1121: Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkali ne chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per directions of the Engineer-in-Charge : 4460 PJEREP1122: Bars up to 12 mm diameter 4470 PJEREP1123: Bars above 12 mm diameter 4480 PJEREP1124: Providing and applying anticorrosive treatment to exposed structural reinforcement with two coats of IPNET RB or equival ent with time interval of minimum 8-10 hours between each coat after the application of two coats of alkaline rust converting primer . The application shall be done by brush after cleaning existing reinforecement with wire/ rotary wire brush to make the surface fre e from loose material, dirt etc. and thoroughly washing with water and allowing it to dry inclusive of all materials, labour, equipm ent, etc. complete as per specifications and directions of the Engineer-in-Charge. The application of anticorrosive treatment shall be strictly as per technical specifications and directions of the Engineer-in-Charge. [Note: Unit M shall mean RUNNING METRE. Th e running metre of rebars shall be measured for payment purpose]. 4490 PJEREP1125: Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm up to 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the stee l bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per dire ctions of the Engineer-in-Charge : Up to and including 12 mm diameter 4500 PJEREP1126: Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and dir ections of the Engineer-in-Charge complete in all respect : 4510 PJEREP1127: SBR Polymer (@ 10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. 4520 PJEREP1128: Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. 4530 PJEREP1129: Providing, mixing and applying SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 g raded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of the Engineer-in-Charge. [No te: Measurement and Payment- The pre-measurement of thickness shall be done just after the surface preparation is completed and paym ent under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by soundi ng/ tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/sq.mm] : 4540 PJEREP1130: 12 mm average thickness. 4550 PJEREP1131: 25 mm average thickness in 2 layers. 4560 PJEREP1132: 50 mm average thickness in 3 layers. 4570 PJEREP1140: Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/ honey-comb area of con crete/ masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of the Engineer-in-Charge. [Note: The payment shall be made on the basis of actual weight of approved grout injected] : 4580 PJEREP1141: Stirrer mixed Acrylic Polymer of approved make (@ 2% of weight of cement used) modified cement slurry made with non shri nk compound in Concrete/ RCC work. 4590 PJEREP1142: Stirrer mixed SBR Polymer (of approved make) modified cement slurry made with Shrinkage Compensating Cement in Concrete/ RCC work. 4600 PJEREP1143: Epoxy injection grout in Concrete/ RCC work of approved make. 4610 PJEROA1249: Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand pic king, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required de nsity. 4620 PJEROA1250: SURFACE DRESSING : 4630 PJEROA1251: Surface dressing on new surface with paving bitumen of grade VG-10 of approved quality using 2.25 Kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete. 4640 PJEROA1252: Surface dressing on new surface in two coats with bitumen of grade VG-10 of approved quality using 1.8 kg of bitumen per sqm with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface for first coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size per 100 sqm of road surface for second coat, including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. 4650 PJEROA1253: Surface dressing on old surface with hot bitumen of grade VG-10 of approved quality using 1.95 kg of bitumen per sqm wit h 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity, etc. complete. 4660 PJEROA1254: Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 Kg/sqm of surface area with 1 .5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete :Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4670 PJEROA1255: Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area wit h 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity etc. complete : Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4680 PJEROA1285: SEAL COAT : 4690 PJEROA1286: Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitume n using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surfac e, including rolling and finishing with road roller all complete. [Note: This item to be operated only with the prior approval of th e Engineer-in-Charge]. 4700 PJEROA1298: PAINTING AREA / RUNWAY MARKING : 4710 PJEROA1299: Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conf orming to IS:164, on bituminous surface in white/ yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete 4720 PJEROA1300: New work (Two or more coats) 4730 PJEROA1301: Old work (One or more coats) 4740 PJEROA1309: Providing and fixing Glow Studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylore trite) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by the Engineer-in-Charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope o f retro-reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as re commended in BS: 873 (Part-4):1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedu re recommended by the manufacturer complete and as per directions of the Engineer-in-Charge. 4750 PJEROA1315: Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermopl astic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, prop ane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cle aning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charg e and accordance with applicable specifications. 4760 PJEROA1359: Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material withi n 50 metre lead as per directions of the Engineer-in-Charge. 4770 PJEROA1360: Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., dispos al of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge. 4780 PJEROA1361: Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost]. 4790 PJEROA1362: Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, joint ed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except a t sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be suppl ied by the department free of cost.] 4800 PJEROO0824: THERMAL INSULATION: 4810 PJEROO0825: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS:8183, density 24 kg/cu.m., 50mm thick, wrapped in 200G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. 4820 PJEROO0826: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183, Density 16 Kg/cu.m., 5 0 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing G.I. wir e. 4830 PJEROO0827: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183 having density 24 Kg/cu .m., 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held in position by criss crossing G.I. wire etc. complete as per directions of the Engineer-in-Charge. 4840 PJEROO0828: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS:8 183, density 48 Kg/cu.m., 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 Gauge wire mesh, for top most ceiling of building. 4850 PJEROO0872: FALSE CEILING : 4860 PJEROO0873: Providing and fixing tiled false ceiling of specified materials size 595x595 mm in true horizontal level, suspended o n inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sq.m., both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, sp aced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between m ain T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of siz e 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for servi like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using G.I. slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia. and 50 mm long dash fasteners, 4 mm G.I. adjustable rods w ith galvanised butterfly level clips size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings a nd as directed by the Engineer-in-Charge : 4870 PJEROO0874: G.I. Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm dro p; made of G. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and electro-statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 4880 PJEROO0875: G.I. Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made G.I. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and 20% perforation area with 1.8 mm dia. holes and having NRC (Noise Reduction Coefficient) of 0.5, electro-statically polyester powder coated thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 4890 PJEROO0876: 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from n atural gypsum as per IS:2095 (Part-1) and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 4900 PJEROO0877: 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 (Part-1 ), of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm center to center with center borders of 48 mm and the side border s of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bon ded glass wool backing. 4910 PJESAN1368: SANITARY INSTALLATIONS : 4920 PJESAN1369: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 l itre low level white P.V.C. dual flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming t o IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 4930 PJESAN1370: Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litr e low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:72 31, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 4940 PJESAN1371: W.C. pan with ISI marked white solid plastic seat and lid. 4950 PJESAN1373: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low lev el white vitreous china dual flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangemen t with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings a nd brackets, cutting and making good the walls and floors wherever required : 4960 PJESAN1374: W.C. pan with ISI marked white solid plastic seat and lid 4970 PJESAN1376: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass union s and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requir ed : 4980 PJESAN1377: One urinal basin with 5 litre white P.V.C. automatic flushing cistern 4990 PJESAN1378: Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 5000 PJESAN1379: Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 5010 PJESAN1391: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pat tern, including painting of fittings and brackets, cutting and making good the walls wherever require : 5020 PJESAN1392: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 5030 PJESAN1407: Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 5040 PJESAN1408: Kitchen sink with drain board : 5050 PJESAN1409: 510x1040 mm bowl depth 250 mm 5060 PJESAN1410: 510x1040 mm bowl depth 225 mm 5070 PJESAN1411: 510x1040 mm bowl depth 200 mm 5080 PJESAN1412: 510x1040 mm bowl depth 178 mm 5090 PJESAN1457: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : 5100 PJESAN1466: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick har d board ground fixed to wooden cleats with C.P. brass screws and washers complete. 5110 PJESAN1473: Providing and fixing toilet paper holder : 5120 PJESAN1474: C.P. Brass 5130 PJESAN1665: Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour : 5140 PJESAN1666: Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. 5150 PJESAN1667: Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. 5160 PJESAN1668: Providing and fixing PTMT Bottle Trap for Wash basin and sink : 5170 PJESAN1669: Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 5180 PJESAN1670: Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. 5190 PJESAN1671: Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 5200 PJESAN1672: Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wal l face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 5210 PJESAN1673: Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed f ittings arrangement of approved quality and colour : 5220 PJESAN1674: 450 mm long towel rail with total length of 495 mm, 78 mm width and effective height of 88 mm, weighing not less than 17 0 gms. 5230 PJESAN1675: 600 mm long towel rail with total length of 645 mm, 78 mm width and effective height of 88 mm, weighing not less than 19 0 gms. 5240 PJESTE0618: Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, lock ing arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 5250 PJESTE0619: Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respe ctively, including applying a priming coat of approved steel primer. 5260 PJESTE0623: Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through t heir entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing n ecessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top cover of required thickness for rolling shutters : 5270 PJESTE0624: 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover 5280 PJESTE0627: Providing and fixing ball bearing for rolling shutters. 5290 PJESTE0628: Extra for providing mechanical device chain and crank operation for operating rolling shutters : 5300 PJESTE0629: Exceeding 10.00 sq.m. and up to 16.80 sq.m. in the area 5310 PJESTE0630: Exceeding 16.80 sq.m. in area 5320 PJESTE0664: Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase rail ing and similar works, including applying priming coat of approved steel primer : 5330 PJESTE0665: M.S. Tube 5340 PJESTE0666: E.R.W. Tubes 5350 PJESTE0667: G.I. Pipes 5360 PJESTE0674: Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. , of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-C harge. [Note: For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nu ts, bolts, fasteners etc.] 5370 PJESTE0675: Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts c omplete : 5380 PJESTE0676: Galvanised M.S. wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. 5390 PJESTE0677: Stainless Steel (Grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 5400 PJESTE0687: Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the bo dy of the post), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutting and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects i nclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Cha rge. 5410 PJESTE0690: Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provis ion for lifting arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawing s, specifications and directions of the Engineer-in-Charge. 5420 PJESTE0691: Supplying & fixing Pigeon Protection net of mesh 15 mm x 15 mm & Gauge SW14 in sheds including specials required for bol ting with tie members of truss, painted with two coats of synthetic enamel paint of over a coat of red oxide zinc chrome primer comp lete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction o f the Engineer-in-Charge. 5430 PJESTE0698: G.I. Barbed Wire Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizon tal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 Kg/100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. [Notes: (1) Cost of posts, struts, earth work and concrete work to be paid for separately. (2) Payment to be made per metre cost of total length of barbed wire used]. 5440 PJESTE0704: Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diamet er made of high carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating th ickness equivalent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched al l along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thick ness of 12 microns. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficien tly at regular intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the cl osed condition should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles et c. as per drawings, specifications and directions of the Engineer-in-Charge. 5450 PJESTE0705: Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (tota l length 90 m), having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron Y shaped placed 2.4 m o r 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per the directions of Engineer-in-Charge, with re inforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre. [Note: Cost of M.S. angle, C.C. blocks shall be paid separately]. 5460 PJESTO0175: STONE WORK : 5470 PJESTO0176: RANDOM RUBBLE MASONRY : 5480 PJESTO0177: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cem ent : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 5490 PJESTO0178: Cement mortar 1:6 (1 cement : 6 coarse sand) 5500 PJESTO0179: Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling l evel and the like. 5510 PJESTO0180: Cement mortar 1:6 (1 cement : 6 coarse sand) 5520 PJEWAT1698: WATER SUPPLY : 5530 PJEWAT1699: CPVC PIPES : 5540 PJEWAT1700: Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabil ity for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per directi ons of the Engineer-in-Charge : 5550 PJEWAT1701: 15 mm nominal outer dia pipes 5560 PJEWAT1702: 20 mm nominal outer dia pipes 5570 PJEWAT1703: 25 mm nominal outer dia pipes 5580 PJEWAT1704: 32 mm nominal outer dia pipes 5590 PJEWAT1705: 40 mm nominal outer dia pipes 5600 PJEWAT1706: 50 mm nominal outer dia pipes 5610 PJEWAT1707: Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stab ility for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spa cing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good th e same including testing of joints complete as per directions of the Engineer-in-Charge : 5620 PJEWAT1708: 15 mm nominal dia pipes 5630 PJEWAT1709: 20 mm nominal dia pipes 5640 PJEWAT1710: 25 mm nominal dia pipes 5650 PJEWAT1711: 32 mm nominal dia pipes 5660 PJEWAT1712: External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solve nt cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge : 5670 PJEWAT1713: 15 mm nominal dia pipes 5680 PJEWAT1714: 20 mm nominal dia pipes 5690 PJEWAT1715: 25 mm nominal dia pipes 5700 PJEWAT1716: 32 mm nominal dia pipes 5710 PJEWAT1717: 40 mm nominal dia pipes 5720 PJEWAT1718: 50 mm nominal dia pipes 5730 PJEWAT1719: 65 mm nominal dia pipes 5740 PJEWAT1720: 80 mm nominal dia pipes 5750 PJEWAT1721: 100 mm nominal dia pipes 5760 PJEWAT1722: 150 mm nominal dia pipes 5770 PJEWAT1723: G.I. PIPES : 5780 PJEWAT1724: Internal Work - Exposed on Wall: Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutti ng and making good the walls etc. : 5790 PJEWAT1725: 15 mm dia nominal bore 5800 PJEWAT1726: 20 mm dia nominal bore 5810 PJEWAT1727: 25 mm dia nominal bore 5820 PJEWAT1728: 32 mm dia nominal bore 5830 PJEWAT1729: 40 mm dia nominal bore 5840 PJEWAT1730: 50 mm dia nominal bore 5850 PJEWAT1731: Internal Work - Concealed in wall: Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including mak ing good the walls etc. concealed pipe, including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall : 5860 PJEWAT1732: 15 mm dia nominal bore 5870 PJEWAT1733: 20 mm dia nominal bore 5880 PJEWAT1734: External Work: Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : 5890 PJEWAT1735: 15 mm dia nominal bore 5900 PJEWAT1736: 20 mm dia nominal bore 5910 PJEWAT1737: 25 mm dia nominal bore 5920 PJEWAT1738: 32 mm dia nominal bore 5930 PJEWAT1739: 40 mm dia nominal bore 5940 PJEWAT1740: 50 mm dia nominal bore 5950 PJEWAT1741: 65 mm dia nominal bore 5960 PJEWAT1742: 80 mm dia nominal bore 5970 PJEWAT1743: Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including c utting and threading the pipe etc. complete : 5980 PJEWAT1744: 25 to 40 mm nominal bore 5990 PJEWAT1745: 50 to 80 mm nominal bore 6000 PJEWAT1746: Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete. [Note: Cost of water meter and stop cock to be paid separately]. 6010 PJEWAT1799: BRASS FITTINGS : 6020 PJEWAT1800: Providing and fixing brass bib cock of approved quality : 6030 PJEWAT1801: 15 mm nominal bore 6040 PJEWAT1802: 20 mm nominal bore 6050 PJEWAT1803: Providing and fixing brass stop cock of approved quality : 6060 PJEWAT1804: 15 mm nominal bore 6070 PJEWAT1805: 20 mm nominal bore 6080 PJEWAT1806: Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 6090 PJEWAT1807: 20 mm nominal bore 6100 PJEWAT1808: 25 mm nominal bore 6110 PJEWAT1809: 32 mm nominal bore 6120 PJEWAT1810: 40 mm nominal bore 6130 PJEWAT1811: 50 mm nominal bore 6140 PJEWAT1812: 65 mm nominal bore 6150 PJEWAT1813: 80 mm nominal bore 6160 PJEWAT1971: C.P. BRASS FITTINGS : 6170 PJEWAT1972: Providing and fixing C.P. brass bib cock of approved quality conforming to IS-8931 : 15 mm nominal bore 6180 PJEWAT1973: Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms : 15 mm nominal bore 6190 PJEWAT1974: Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm nominal bore 6200 PJEWAT1975: Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS-8931 : 15 mm nominal bore 6210 PJEWAT1976: Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 : 15 mm nominal bore 6220 PJEWAT1977: Providing and fixing C.P. Brass extension nipple (size 15mm x 50mm) of approved make and quality as per directions of th e Engineer-in-Charge. 6230 PJEWAT1978: Providing and fixing following C.P. Brass central hole wash basin mixer with copper pipe/ pipes and brass nuts of size 1 5mm, etc. complete including cutting & making good the walls wherever required complete in all respects as per specifications and di rections of the Engineer-in-Charge : 6240 PJEWAT1979: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-7171 Queens or approved equivalent) with 2 nos. x 10mm diameter & 450mm long copper pipes. 6250 PJEWAT1980: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-167 or approved equivalent) with 1 no. x 10mm dia meter & 450mm long copper pipe. 6260 PJEWAT2382: Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleani ng the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main t ested in the municipal laboratory : 6270 PJEWAT2383: 80 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6280 PJEWAT2384: 100 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6290 PJEWAT2385: 125 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6300 PJEWAT2434: Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching pow der @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deductio n will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contr actor at his own cost and nothing extra will be paid on this account]. 6310 PJEWAT2435: Cleaning of underground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (1) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (2) Entire surface area of the sump shall then scrubbed thoroughly with wir e brush etc. and pressure washed with water. (3) Chlorination of RCC internal surface by liquid chlorine. (4) The treated surface sh all be dried using air jetting and all loose particles shall be removal from the surface. (5) Finally the surface shall be treated w ith ultra-violet radiation etc. as per direction of the Engineer-in-Charge. 6320 PJEWAT2436: Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from th e terrace including shifting at ground level as per the directions of Engineer-in-Charge. 6330 PJEWOO0237: Providing and fixing panelled or panelled & glazed shutters 35 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6340 PJEWOO0238: Second class teak wood 6350 PJEWOO0239: Kiln seasoned and chemically treated hollock wood 6360 PJEWOO0240: Kiln seasoned selected planks of sheesham wood 6370 PJEWOO0241: Providing and fixing panelled or panelled & glazed shutters 30 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6380 PJEWOO0242: Second class teak wood 6390 PJEWOO0243: Kiln seasoned and chemically treated hollock wood 6400 PJEWOO0244: Kiln seasoned selected planks of sheesham wood 6410 PJEWOO0245: Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and TADS 15:20 01 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of the Engineer-in-Charg e and panelling with panels of: [Note: Butt hinges and necessary screws shall be paid separately] : 6420 PJEWOO0246: 12 mm thick plain grade-1, medium density flat pressed three layer particle board FPT-I or graded wood particle board FP T-I, IS:3087 marked, bonded with BWP type synthetic resin adhesive as per IS:848 : 6430 PJEWOO0247: 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, th ree layer particle board FPT-I or graded wood particle board FPT-I, conforming to IS:3087, bonded with BWP type synthetic resin adhe sive as per IS : 848 and pre-laminated conforming to IS:12823, Grade 1, Type-II marked. 6440 PJEWOO0248: 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing laminatio n) grade-1, medium density flat pressed, three layer particle board FPT-I or graded wood particle board FPT-1 conforming to IS:3087 bonded with BWP type synthetic resin adhesive as per IS:848 and pre-laminated conforming to IS:12823, Grade-1, Type-II marked. 6450 PJEWOO0249: Providing and fixing panelling or panelling & glazing for panelled or panelled & glazed shutters (25 mm to 40 mm thick s hutters) for doors, windows and clerestory windows [Note: Area of opening for Panel inserts/ Glass panes excluding portion inside gr ooves or rebates shall be measured for payment] : 6460 PJEWOO0250: Second class teak wood 6470 PJEWOO0251: Kiln seasoned and chemically treated hollock wood 6480 PJEWOO0252: Float Glass Panes - 4.0 mm thick (weight not less than 10 Kg/SQM) 6490 PJEWOO0253: Float Glass Panes - 5.5 mm thick (weigth not less than 12.5 Kg/SQM) 6500 PJEWOO0254: Fly proof Stainless Steel (Grade 304) wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beadi ng 6510 PJEWOO0255: 12 mm thick Exterior Grade-I MDF Board conforming to IS:14587, pre-laminated with decorative lamination on both side 6520 PJEWOO0256: 12 mm thick Marine plywood conforming to IS:710 6530 PJEWOO0257: 12 mm thick Fire retardant plywood conforming to IS:5509 6540 PJEWOO0258: Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4.0 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : 6550 PJEWOO0259: Second class teak wood 6560 PJEWOO0260: Kiln seasoned and chemically treated hollock wood 6570 PJEWOO0261: Kiln seasoned selected planks of sheesham wood : 6580 PJEWOO0291: Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block bo ard construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands a nd face veneers on both faces of shutters : 6590 PJEWOO0292: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6600 PJEWOO0293: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6610 PJEWOO0294: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 6620 PJEWOO0295: Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shu tters conforming to IS:2202 (Part-I) : On one side only 6630 PJEWOO0296: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (ov er all area of door shutter to be measured). 6640 PJEWOO0297: Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors. [Notes: (1) Cost of glass excluded. ( 2) Overall area of door shutter to be measured] : 6650 PJEWOO0298: Rectangular or square 6660 PJEWOO0299: Circular 6670 PJEWOO0300: Extra for cutting rebate in flush door shutters. [Note: Total area of the shutter to be measured]. 6680 PJEWOO0301: Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 6690 PJEWOO0302: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size : 6700 PJEWOO0303: Second class teak wood 6710 PJEWOO0304: Kiln seasoned and chemically treated hollock wood 6720 PJEWOO0305: Kiln seasoned selected class of sheesham wood 6730 PJEWOO0328: Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 6740 PJEWOO0329: 12 mm dia. 6750 PJEWOO0330: 20 mm dia. 6760 PJEWOO0331: 25 mm dia. 6770 PJEWPF2691: WATERPROOFING : 6780 PJEWPF2692: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (a) First course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS:2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (b) Second course of 20 m m cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (c) Third course of applying blown or residual bitumen applied hot at 1.7 Kg/ sqm of ar ea. (d) Fourth course of 400 micron thick PVC sheet. [Note: Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm]. 6790 PJEWPF2698: Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing ceme nt compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 K g/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the pu rpose of measurement the entire treated surface will be measured. 6800 PJEWPF2699: Grading roof for water proofing treatment with : 6810 PJEWPF2700: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6820 PJEWPF2701: Cement mortar 1:3 (1 cement : 3 coarse sand) 6830 PJEWPF2702: Cement mortar 1:4 (1 cement : 4 coarse sand) 6840 PJEWPF2703: Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers havin g Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elast omeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid ( dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping an d properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per directions of the Engine er-in-Charge. 6850 PJEWPF2704: Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC struc tures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ su bway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative ( internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrost atic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and directions of the Engineer-in-Charge. The product performance shall carry guaranteed for 10 years against any leakage : 6860 PJEWPF2705: For vertical surface two coats @ 0.70 kg per sqm per coat 6870 PJEWPF2706: For horizontal surface one coat @ 1.10 kg per sqm 6880 PJEWPF2707: Providing and applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterpro ofing polymers on interior wall plaster surface in three coats @ 14.35 Kg/10 sqm. One coat of self priming of cementatious waterproo fing polymer (dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in t he ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per 10 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 20 NRECIV0003Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI g rade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes Finit in required proportion to make the are a clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall be measured). 30 NRECIV0004Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water with wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete a s per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with cleani ng powder,paint remover as per requirement all labour, material etc.complete. 40 NRECIV0005Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, cle aning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with al l labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 50 NRECIV0008Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Execut ive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, se gregate the waste into biodegradable & non bio-degradeable waste and finally dispose them separately at designated place (Dumping Ya rd/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc. complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to work men, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engine er-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepera tely. The unit MONTH (MON) shall mean per house/building per month 60 PJEDRA2588Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL s hall mean KILO LITRE] 70 PJEHOR2828Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of eart h measured in stacks will be reduced by 20% for payment]. 80 PJEHOR2830Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note : Volume of cattle manure measured in stacks will reduced by 8% for payment]. 90 PJEHOR2835Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 100 PJEHOR2836Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, du mp manure and/or good earth shall be paid separately under relevant item of SOR]. 110 PJEHOR2861Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Asho kas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minim um complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 120 PJEHOR2898Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and app lying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [ Note: Unit SQM shall mean PER SQM PER MONTH.] 130 PJEHOR2903Pruning, trimming, shaping of trees/ shrubs (height 15 feet & above) and removal of cut materials up to 50m lead inclusive of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 140 PJEHOR2904Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation wa ter at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering includi ng cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Un it EA shall mean PER TRIP]. 150 PJEHOR2908Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, debri s, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per direct ion of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 160 PJEHOR2909Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km lea d & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 170 PJEWAT2434Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut b rushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powde r @ 0.5gm per litre capaci ty of tank, including marking the date of cleaning on the side of tank body with the help of stencil and p aint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank s hould be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contrac tor at his own cost and nothing extra will be paid on this account].
Contract Date: Dec 16, 2025 Contract Value : 38.05 Lakh
Boards / Undertakings / PSU No of Bidders 10
21.
Defence #8434072 AOC
Tender For Term Contract For Otm Accommodation In Sector B Area At Patiala Under Ge (S) Patiala.; 1 Supplying and fixing in repairs Box Type Pressed Steel Windows with Fly Proof Shutters as per drawing no. TD-276R (Sheet No 1/4 to 4R/4) with 1.25 mm thick sheet (irrespective of whatever shown on the drawings), stainless steel wire gauge 0.36mm dia and 1.40 aperature (irrespective of whatever shown on the drawings) and grill of 8mm square bar (with or without provision of cooler opening) including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 for four nos for each window complete all as specified and directed. Note : (i) Glass, wire cloth and grill etc are deemed to be included in the unit rates and no payment for any these items shall be done separately. (ii) TD-276R (Sheet No. ¼, 2/4, 3/4 & 4R/4) not attached with the tender documents and the same may be checked in the office of Engineer-in-Charge. Square Metre 5,250.00 2 S&F single piece vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with S/P trap, snow white colour of size 655 x 355 x 735 mm of make Cera (Ceremony 5D) or equivalent make mentioned hereinafter including connection to drain (or out going pipe) and to flushing pipe, anti syphonagee pipe,etc., with flush pipe and incl. slim soft close seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified and directed. Each 22,500.00 3 S&F in repair brass chrome finish wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe for hot and cold water fancy type fixed with iron pipe 15 mm dia of make Cera cat part No. F1099403 or equivalent make mentioned hereinafter complete all as specified and directed. Each 7,500.00 4 S&F in repairs Health Faucet ABS body with 1 meter SS braided connection pipe in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified and directed. Each 1,500.00 5 S&F sheet glass shelf assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel D bracket fixed and railing complete all as specified and directed. Each 750.00 6 S&F vitreous china premium/1st quality wash basin (under counter), snow white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions and taking down existing of any description/size all as specified and directed. Each 4,500.00 7 S&F in repair Wall Hung Basin of size 510X410x160 mm with thin rim snow white colour without pedestal including cutting for and pinning in ends of brackets or erecting stand (bracket includies) and making good the surface/joints with white cement of make Cera (Chino) or equivalent make mentioned hereinafter including S&F all accessories as recommended by manufacturer for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions and taking down existing of any description/size all as specified and directed. Each 4,500.00 8 S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified and directed. Running Metre 225.00 9 S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed. Note : Board on back side wall will be fixed with minimum 5mm PVC spacers/buffers. The payment for the same deemed to be included in the quoted unit rates. Square Metre 2500.00 10 S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing with density of 850 Kg/cu.m complete all as specified and directed. Square Metre 2800.00 11 S&F steel nickel plated auto closing concealed hinges with integrated soft closing mechanism with 35 mm cup diameter of 0 crank or 8 crank openable at 110 degree/ 95 degree alongwith mounting plates and cover caps all as per manufacturers instructions for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Each pair/set 650.00 12 S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. Each pair/set 750.00 13 S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished of make Harrison cat part No. 0812 or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 300.00 14 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished of make Harrison (Jasmine) or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 180.00 15 S&F butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal complete fixed in position all as specified and directed. Each 120.00 16 S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed. Running Metre 225.00 17 S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions all as specified and directed. Each 75.00 18 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished of make Harrison (Jasmine) or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 180.00 19 S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position all as specified and directed. Kilogram 1,800.00 20 S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified and directed. Each 4,500.00 21 S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturers instructions all as specified and directed. Running Metre 750.00 22 S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed. Each 675.00 23 S&F 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish complete fixed in position all as specified and directed. Square Metre 2,250.00 24 Supply and fixing in repair PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed. Each 3,000.00 25 S & F ( in Repair) S/S plate rack size ( 900x900x250mm) of standard size weight not less then 5 kg complete all as specified and directed. Each 3,750.00 26 S&F CP Bottle Trap 32 mm 300mm with inlet and oulet screwed for pipe and connections with including necessary accessories complete all as specified and directed. Each 1,800.00 27 Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Square Metre 7,500.00 28 Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkhats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf Square Metre 6,000.00 29 M&L for efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface after taking down plaster from brick work and finally apply 15 mm thick plastering with mixing of (URP 301) over treated surfaces complete all as specified and directed. Note:- (i) taking down plaster and applying of 15mm thick plaster will be measured separately (ii) :- after taking down plastering, uneven/brick joint surfaces will be repaired with cement mortar in 1:3 with mixing of WPC URP 301. Square Metre 500.00 30 S&F PVC Wall panelling of hollow sections of size 5-6 mm thick (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer and complete all as specified and directed. Square Metre 600.00 31 S&F WPC Wall panelling of fluted/louvers/hollow sections/ of size 12- 23 mm thickness (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer and complete all as specified and directed. Square Metre 1,200.00 32 S&F 12mm thick HDF board both side decorative compact laminate fire retardant/ termite proof/ BWP/ borer proof of approved colour, shade and sizes as in cubicals with 10 years guarantee for the board against any moisture including S&F of following accessories/ hardware with 5 years guarantee for each cubical complete fixed in position in all respect all as specified and directed. (i) Stainless Steel Adjustable Shoes/Legs 316 Grade 150mm High - 2 nos (ii) Stainless Steel Gravity Hinges 304 Grade - 3 nos (iii) Stainless Steel Coat Hook 304 Grade - 1 no (iv) Stainless Steel Door Knob 304 Grade - 1 no (v) Stainless Steel Indicator Lock 304 Grade - 1 no (vi) Profile U Channel (Aluminium powder coated) Length-1.82m (6 Feet) each - 2 nos (vii) Door Stop (Aluminium powder coated) Length-1.82m (6 Feet) each - 2 nos (viii) Noise Defending Tape/ Gasket Rubber Length-1.82m (6 Feet) each - 1 no (ix) Hollow circular pipe of aluminium powder coated of size 30- 40mm for Top Rail of cubicals (x) Corner connector, wall brackets, s/s screws and wall plugs as required Square Metre 6,750.00 33 M&L for 3mm thick ACP sheets of any colour as approved as in wall cladding/ceiling etc. With 12mm groove of silicon water proof and covering all screws on ACP by silicon including aluminium frame work of section 40x25mm and of 14 gauge thickness fixed to existing wall/structure with 75mm stainless steel screws and members interconnected with 40/20mm stainless steel screws, also including all necessary use of all double line scaffolding, trestles, ladders, cradles etc. necessary for execution of work and protective measures including hoisting and lowering, fixed to frame work at height not exceeding 8 mtrs all as specified and directed. Square Metre 2,700.00 34 M&L for Glazed Vitrified Tiles (Premium/1st quality) of size 800 x 1600 in floors etc. set, laid and jointed in suitable adhesive (flexiest H-40 or equivalent as approved) and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved) all as specified and directed. Square Metre 2,250.00 35 S&F double cylinder cam action floor spring with closing force EN4 suitable for max door weight 150 Kg, max door width 1100mm with closing speed 130-10º, final closing speed 10-0º, hold open - 90º, approx weight of floor spring 6Kg, with installation dimensions of size 306x108x40mm of make Ozone (FS-9400-STD-STD) or equivalent make mentioned hereinafter fixed in position as per instructions of manufacture including S&F top fittings/hardware from same manufacturer complete all as specified and directed. Each 9,500.00 36 S&F H type pull glass door Handles of size 25x300/450 mm stainless steel 304 Grade with back to back installation incl all accessories like gasket, grub screws etc fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 1,500.00 37 S&F re-informing rod 19mm dia at top of showers etc stainless steel incl all accessories fixed in position as per instructions of manufacture complete all as specified and directed. Running Metre 800.00 38 S&F all types hinges (wall to glass/glass to glass) stainless steel 304 Grade and PSS finish suitable for 10mm glass as in showers complete fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 4,000.00 39 S&F all types connectors/ brackets/ catchers etc (L-shaped, wall to glass, glass to glass, floor to glass) stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 500.00 40 S&F all types patch fittings stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and directed. Each 2,500.00 41 M&L repairing potholes in roads with cold mix instant pothole repairing mix including preparation, cleaning, applying/spraying a coat of emulsion RS1 and ramming & levelling etc as per manufacturers instructions complete all as specified and directed. Kilogram 50.00 42 M & L for 2.5mm thick road marking thermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm ) and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips of 100/150 mm width on road surfaces complete all as specified and directed. Square Metre 350.00 1. Old Brick work/brick bats Cum 500.00 2. Chowkhats with shutters not exceeding 1.5 Sqr mtr incl iron mongery & hold fast Each 500.00 3. Chowkhats with shutters exceeding 1.5 sqr mtr but not exceeding 4 Sqr mtr incl iron Each 600.00 4. Old unserviceable shutters not exc 2.0 Sqm including iron mongeries Sqm 200.00 5. Old unserviceable PVC frame with PVC shutter n exc 1.50 sqm with unserviceable builder hardware. Sqm 100.00 6. Old unserviceable rusted steel window Sqrn 500.00 7. Old unserviceable ventilator with fitting of an description. Sqm 100.00 8. Old unserviceable Timber Boarding of any description Sqrn 100.00 9. Old unserviceable Timber Fillets rails etc of any description under 40 Sq cm in section. RM 10.00 10. Old wire gauge Sqm 50.00 11. Old unserviceable scrap iron of any description Kg 35.00 12. Old unserviceable aluminium scrap of any description Kg 120.00 13. Old unserviceable iron mongery of any size & description. Each 5.00 14. Old unserviceable plywood of any description Sqm 25.00 15. Old unserviceable board of any description Sqm 50.00 16. Old Cup board shutters of any description Sqm 50.00 17. Old ceiling board incl cover fillets Sqm 10.00 18. Old AC sheets Sqm 20.00 19. Old brick tiles/bats Sqm 20.00 20. Old curtain rods RM 5.00 21. Old rain water pipe of any description incl fittings RM 25.00 22. Old water storage tank of any description incl fittings Each 500.00 23. Old pillar cock, bib cock, stop cock, angle valve of any description. Each 35.00 24. Old unserviceable 15mm bore PTMT bib tap / pillar / stop valve of any description. Each 15.00 25. Old cistern Each 50.00 26. Steel sink Each 100.00 27. Old CI pipe 50/75/100 mm bore without fittings RM 100.00 28. Old CI fitting 75/100 mm bore Each 50.00 29. Old structural steel Qtl 3500.00 30. Old RCC Post or strut RM 100.00 31. Old Chain link fencing mesh Sqm 60.00 32. Old unserviceable CGI Sheets incl ‘J’ hooks sqm 50.00 33. Unserviceable brick tiles sqm 20.00 34. Unserviceable bib taps, stop cock, pillar tap, shower rose, Angle cock, Sink cock. Towel Rail Brass / CP Each 35.00 35. Old WHB with brackets Each 20.00 36. Unserviceable Steel sink Each 100.00 37. Unserviceable flushing cistern incl fitting Each 50.00 38. Unserviceable gate valves 20mm Brass Each 80.00 39. Old scrap steel / iron Kg 35.00 40. Unserviceable CI pipe 100/75 mm dia RM 100.00 41. Unserviceable CI fitting of any size Kg 30.00 42. Old U/S cat eyes of any description Each 10.00 43. Old U/S Delinator of any description Each 20.00 44. Old U/S Convex Mirror of any description Each 50.00 45. Brick Edging of any description RM 5.00 46. Old GI Tubing 15mm bore RM 20.00 47. Old GI Tubing 20mm bore RM 30.00 48. Old GI tubing 25mm bore RM 40.00 49. Old GI tubing 40mm bore RM 50.00 50. Old GI tubing 50mm bore RM 80.00 51. Old GI tubing 80mm bore RN 100.00 52. Old GI tubing 100mm bore RM 150.00 53. Old u/s Gate Valve 20mm die bore Each 35.00 54. Old u/s Gate Valve 25mm dia bore Each 45.00 55. Old u/s Gate Valve 40mm dia bore Each 82.00 56. Old u/s Gate Valve 50mm dia bore Each 100.00 57. Old U/s Sluice valve of 200mm die bore CI Each 750.00 58. Old U/s Sluice valve of 150mm dia bore CI Each 550.00 59. Old U/s Sluice valve of 100mm dia bore CI Each 350.00 60. Old U/s Sluice valve of 80mm die bore CI Each 250.00 61. Old U/s broken Cl/DI pipe of 200mm dia RM 300.00 62. Old U/s broken Cl/DI pipe of 150mm die RM 250.00 63. Old U/s broken Cl/DI pipe of 100mm dia - RM 150.00 64. Old U/s broken Cl/DI pipe of 80mm dia RM 100.00 65. Old Cl/DI fitting Kg 30.00 66. Old U/S Pump Shaft any type Each 105.00 67. Old U/s Brushes Each 22.00 68. Old U/s Impeller obtained from submersible pump set Each 100.00 69. Old U/s Impeller centrifugal / Non clog pump set Each 130.00 70. Old U/s thrust plate Each 10.00 71. Old U/s stage casing bowl Each 30.00 72. Old U/s Coupling assy Each 25.00 73. Old U/s thrust bearing housing Each 30.00 74. Old U/s Thrust pads Each 20.00 75. Old unsv tyre coupling Each 20.00 76. Old UNSV Star delta starter 40 HP Each 300.00 77. Old DOL Starter any type 10 HP Each 120.00 78. Run lead joint 80mm dia Each 40.00 79. Run lead joint 100mm dia Each 50.00 80. Run lead joint 150mm dia Each 60.00 81. Run lead joint 200mm dia Each 80.00 82. MS Spindle 100 mm Sluice valve Each 20.00 83. MS Spindle 150 mm Sluice valve Each 25.00 84. MS Spindle 200 mm Sluice valve Each 30.00 85. Submersible cable 16 sqmm 3 Core RM 25.00 86. Submersible cable 10 sqmm 3 Core RM 15.00 87. Old unsv MCCB Each 20.00 88. Old unsv earthing material Each 100.00 89. Scrap of unserviceable brass Kg 150.00 90. Old wooden or PVC or steel chowkhats with shutters n exc 1.5 sqm each incl iron mongery Each 400.00 91. Old skeleton shutters with iron mongery Each 300.00 92. Old Steel window with frame and shutter of any size complete Each 500.00 93. Old steel cupboard with frame and shutter of any size complete Each 250.00 94. Old steel ventilator of any size complete Each 200.00 95. Old curtain rod of any size description RM 5.00 96. U/s Old PVC water tank of capacity exc. 1000 litre 500 but n.exc Each 450.00 97. Old CI pipe 100 mm dia pipe of any description such as Nahani trap Bends TEE etc RM 100.00 98. Old PVC pipe for rain water of 110 mm dia or 75 mm dia of any size or description RM 25.00 99. Old looking mirror of any size/ description Each 10.00 100. Old grating of any size/ description Each 10.00 101. Old PVC connecting pipe of any size description Each 10.00 102. Old PVC pipe Bends pipe of 110 mm dia or 75 mm dia of any size description Each 5.00 103. Old U/S wiring with switches, sockets, ceiling roses, regulators etc Point 25.00 104. Old U/S Bulk Head Fitting Each 10.00 105. Old U/S Fan Regulator Each 5.00 106. Old U/S MCB DB TPN Each 50.00 107. Old U/S DB SPN 8 way Each 25.00 108. Old U/S MCB Each 2.00 109. Old U/S Sub main Wiring RM 10.00 110. Old Switch, socket, regular, regulator lamp holder, call bell etc Point 25.00 111. Old Unsv bldg security light Each 25.00 112. Old PVC doors Intl frame of any size Incl hardware etc 1.0 Sqm and n.exc 2.00 s.q.m Each 300.00 113. Old wooden door Intl MS frame of any size Incl hardware etc 1.0 s.q.m and n.exc 2.00 s.q.m Each 350.00 114. Old iron stone obtained from demolition of RCC work KG 30.00 115. Old red stone obtained from flooring of any description or size or thickness etc sqm 80.00 116. UNSV Old PVC water tank of capacity 200 to 500 litre Each 250.00 117. Old wooden windows of any description/size and hardware etc Each 150.00 118. Old u/s wall and ceiling boards any thickness, inc!uding cover fillets/frame work of any description Sqm 5.00 119. Old AC sheet or roof of any size Sqm 20.00 120. U/s EWC of any pattern Each 20.00 121. Old CI Cowl of any dia or description Each 30.00 122. Old Granite, Kota and marble etc of any size Sqm 30.00 123. Old U/s rolling shutter of any size or description Each 2000.00 124. Old u/s high level CI flushing cistern of any description Each 300.00 125. U/S light fittings tube light 4 feet Each 25.00 126. Old U/S PVC scrap Kg 20.00 127. Old Aluminum Scrap Kg 150.00 128. Old Copper Scrap Kg 380.00
Contract Date: Dec 15, 2025 Contract Value : 14.04 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
22.
Defence #8434070 AOC
Tender For Term Contract For Artificers Work For Otm And Md Accn At Nabha Under Ge (S) Patiala.; 1 Supplying and fixing in repairs Box Type Pressed Steel Windows with Fly Proof Shutters as per drawing no. TD-276R (Sheet No 1/4 to 4R/4) with 1.25 mm thick sheet (irrespective of whatever shown on the drawings), stainless steel wire gauge 0.36mm dia and 1.40 aperature (irrespective of whatever shown on the drawings) and grill of 8mm square bar (with or without provision of cooler opening) including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 for four nos for each window complete all as specified and directed. Note : (i) Glass, wire cloth and grill etc are deemed to be included in the unit rates and no payment for any these items shall be done separately. (ii) TD-276R (Sheet No. ¼, 2/4, 3/4 & 4R/4) not attached with the tender documents and the same may be checked in the office of Engineer-in-Charge. Square Metre 5,250.00 2 S&F single piece vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) with S/P trap, snow white colour of size 655 x 355 x 735 mm of make Cera (Ceremony 5D) or equivalent make mentioned hereinafter including connection to drain (or out going pipe) and to flushing pipe, anti syphonagee pipe,etc., with flush pipe and incl. slim soft close seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified and directed. Each 22,500.00 3 S&F in repair brass chrome finish wall mixer (3-in-1) with arrangement for both telephonic hand shower and overhead shower with bend pipe for hot and cold water fancy type fixed with iron pipe 15 mm dia of make Cera cat part No. F1099403 or equivalent make mentioned hereinafter complete all as specified and directed. Each 7,500.00 4 S&F in repairs Health Faucet ABS body with 1 meter SS braided connection pipe in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified and directed. Each 1,500.00 5 S&F sheet glass shelf assembly of 300X300mm for corners consisting of 5.5 to 6mm thick glass shelf and with bevelled edges/hatching of edges fixed with stainless steel D bracket fixed and railing complete all as specified and directed. Each 750.00 6 S&F vitreous china premium/1st quality wash basin (under counter), snow white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions and taking down existing of any description/size all as specified and directed. Each 4,500.00 7 S&F in repair Wall Hung Basin of size 510X410x160 mm with thin rim snow white colour without pedestal including cutting for and pinning in ends of brackets or erecting stand (bracket includies) and making good the surface/joints with white cement of make Cera (Chino) or equivalent make mentioned hereinafter including S&F all accessories as recommended by manufacturer for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturers instructions and taking down existing of any description/size all as specified and directed. Each 4,500.00 8 S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified and directed. Running Metre 225.00 9 S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed. Note : Board on back side wall will be fixed with minimum 5mm PVC spacers/buffers. The payment for the same deemed to be included in the quoted unit rates. Square Metre 2500.00 10 S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing with density of 850 Kg/cu.m complete all as specified and directed. Square Metre 2800.00 11 S&F steel nickel plated auto closing concealed hinges with integrated soft closing mechanism with 35 mm cup diameter of 0 crank or 8 crank openable at 110 degree/ 95 degree alongwith mounting plates and cover caps all as per manufacturers instructions for kitchen cabinet shutters complete in all respect and fixed in position all as specified. Each pair/set 650.00 12 S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed. Each pair/set 750.00 13 S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished of make Harrison cat part No. 0812 or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 300.00 14 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished of make Harrison (Jasmine) or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 180.00 15 S&F butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal complete fixed in position all as specified and directed. Each 120.00 16 S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed. Running Metre 225.00 17 S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions all as specified and directed. Each 75.00 18 S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished of make Harrison (Jasmine) or equivalent make mentioned hereinafter complete fixed in position all as specified and directed. Each 180.00 19 S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup & saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required size complete fixed in position all as specified and directed. Kilogram 1,800.00 20 S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified and directed. Each 4,500.00 21 S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturers instructions all as specified and directed. Running Metre 750.00 22 S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed. Each 675.00 23 S&F 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish complete fixed in position all as specified and directed. Square Metre 2,250.00 24 Supply and fixing in repair PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed. Each 3,000.00 25 S & F ( in Repair) S/S plate rack size ( 900x900x250mm) of standard size weight not less then 5 kg complete all as specified and directed. Each 3,750.00 26 S&F CP Bottle Trap 32 mm 300mm with inlet and oulet screwed for pipe and connections with including necessary accessories complete all as specified and directed. Each 1,800.00 27 Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Square Metre 7,500.00 28 Powder coated 50 microns extruded aluminium glazing doors & shutters made out of section 63.5x38.10x1.29mm for chowkhats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. and aluminium beads 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf Square Metre 6,000.00 29 M&L for efflorescence treatment by applying two layer of fastflex Dr. fixit (Pidilite co.) over brick surface after taking down plaster from brick work and finally apply 15 mm thick plastering with mixing of (URP 301) over treated surfaces complete all as specified and directed. Note:- (i) taking down plaster and applying of 15mm thick plaster will be measured separately (ii) :- after taking down plastering, uneven/brick joint surfaces will be repaired with cement mortar in 1:3 with mixing of WPC URP 301. Square Metre 500.00 30 S&F PVC Wall panelling of hollow sections of size 5-6 mm thick (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer and complete all as specified and directed. Square Metre 600.00 31 S&F WPC Wall panelling of fluted/louvers/hollow sections/ of size 12- 23 mm thickness (colour/pattern as approved by AO) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer and complete all as specified and directed. Square Metre 1,200.00 32 S&F 12mm thick HDF board both side decorative compact laminate fire retardant/ termite proof/ BWP/ borer proof of approved colour, shade and sizes as in cubicals with 10 years guarantee for the board against any moisture including S&F of following accessories/ hardware with 5 years guarantee for each cubical complete fixed in position in all respect all as specified and directed. (i) Stainless Steel Adjustable Shoes/Legs 316 Grade 150mm High - 2 nos (ii) Stainless Steel Gravity Hinges 304 Grade - 3 nos (iii) Stainless Steel Coat Hook 304 Grade - 1 no (iv) Stainless Steel Door Knob 304 Grade - 1 no (v) Stainless Steel Indicator Lock 304 Grade - 1 no (vi) Profile U Channel (Aluminium powder coated) Length-1.82m (6 Feet) each - 2 nos (vii) Door Stop (Aluminium powder coated) Length-1.82m (6 Feet) each - 2 nos (viii) Noise Defending Tape/ Gasket Rubber Length-1.82m (6 Feet) each - 1 no (ix) Hollow circular pipe of aluminium powder coated of size 30- 40mm for Top Rail of cubicals (x) Corner connector, wall brackets, s/s screws and wall plugs as required Square Metre 6,750.00 33 M&L for 3mm thick ACP sheets of any colour as approved as in wall cladding/ceiling etc. With 12mm groove of silicon water proof and covering all screws on ACP by silicon including aluminium frame work of section 40x25mm and of 14 gauge thickness fixed to existing wall/structure with 75mm stainless steel screws and members interconnected with 40/20mm stainless steel screws, also including all necessary use of all double line scaffolding, trestles, ladders, cradles etc. necessary for execution of work and protective measures including hoisting and lowering, fixed to frame work at height not exceeding 8 mtrs all as specified and directed. Square Metre 2,700.00 34 M&L for Glazed Vitrified Tiles (Premium/1st quality) of size 800 x 1600 in floors etc. set, laid and jointed in suitable adhesive (flexiest H-40 or equivalent as approved) and pointed in matching coloured cement based tile joint filler (Roff -Pidilite or equivalent as approved) all as specified and directed. Square Metre 2,250.00 35 S&F double cylinder cam action floor spring with closing force EN4 suitable for max door weight 150 Kg, max door width 1100mm with closing speed 130-10º, final closing speed 10-0º, hold open - 90º, approx weight of floor spring 6Kg, with installation dimensions of size 306x108x40mm of make Ozone (FS-9400-STD-STD) or equivalent make mentioned hereinafter fixed in position as per instructions of manufacture including S&F top fittings/hardware from same manufacturer complete all as specified and directed. Each 9,500.00 36 S&F H type pull glass door Handles of size 25x300/450 mm stainless steel 304 Grade with back to back installation incl all accessories like gasket, grub screws etc fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 1,500.00 37 S&F re-informing rod 19mm dia at top of showers etc stainless steel incl all accessories fixed in position as per instructions of manufacture complete all as specified and directed. Running Metre 800.00 38 S&F all types hinges (wall to glass/glass to glass) stainless steel 304 Grade and PSS finish suitable for 10mm glass as in showers complete fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 4,000.00 39 S&F all types connectors/ brackets/ catchers etc (L-shaped, wall to glass, glass to glass, floor to glass) stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and directed. Each pair 500.00 40 S&F all types patch fittings stainless steel 304 Grade and suitable for 10-12mm glass as in showers/partitions/doors etc complete fixed in position as per instructions of manufacture complete all as specified and directed. Each 2,500.00 41 M&L repairing potholes in roads with cold mix instant pothole repairing mix including preparation, cleaning, applying/spraying a coat of emulsion RS1 and ramming & levelling etc as per manufacturers instructions complete all as specified and directed. Kilogram 50.00 42 M & L for 2.5mm thick road marking thermo plastic reflective paint to be carried out mechanically with hot application of material (painting material @ 5 Kg /Sqm ) and glass beads @ 250 gm/Sqm confirming to CI No. 803.4 of MoRTH in strips of 100/150 mm width on road surfaces complete all as specified and directed. Square Metre 350.00 1. Old Brick work/brick bats Cum 500.00 2. Chowkhats with shutters not exceeding 1.5 Sqr mtr incl iron mongery & hold fast Each 500.00 3. Chowkhats with shutters exceeding 1.5 sqr mtr but not exceeding 4 Sqr mtr incl iron Each 600.00 4. Old unserviceable shutters not exc 2.0 Sqm including iron mongeries Sqm 200.00 5. Old unserviceable PVC frame with PVC shutter n exc 1.50 sqm with unserviceable builder hardware. Sqm 100.00 6. Old unserviceable rusted steel window Sqrn 500.00 7. Old unserviceable ventilator with fitting of an description. Sqm 100.00 8. Old unserviceable Timber Boarding of any description Sqrn 100.00 9. Old unserviceable Timber Fillets rails etc of any description under 40 Sq cm in section. RM 10.00 10. Old wire gauge Sqm 50.00 11. Old unserviceable scrap iron of any description Kg 35.00 12. Old unserviceable aluminium scrap of any description Kg 120.00 13. Old unserviceable iron mongery of any size & description. Each 5.00 14. Old unserviceable plywood of any description Sqm 25.00 15. Old unserviceable board of any description Sqm 50.00 16. Old Cup board shutters of any description Sqm 50.00 17. Old ceiling board incl cover fillets Sqm 10.00 18. Old AC sheets Sqm 20.00 19. Old brick tiles/bats Sqm 20.00 20. Old curtain rods RM 5.00 21. Old rain water pipe of any description incl fittings RM 25.00 22. Old water storage tank of any description incl fittings Each 500.00 23. Old pillar cock, bib cock, stop cock, angle valve of any description. Each 35.00 24. Old unserviceable 15mm bore PTMT bib tap / pillar / stop valve of any description. Each 15.00 25. Old flushing cistern Each 50.00 26. Old unsv Steel sink Each 100.00 27. Old CI pipe 50/75/100 mm bore without fittings RM 100.00 28. Old CI fitting 75/100 mm bore Each 50.00 29. Old structural steel Qtl 3500.00 30. Old RCC Post or strut RM 100.00 31. Old Chain link fencing mesh Sqm 60.00 32. Old unserviceable CGI Sheets incl ‘J’ hooks sqm 50.00 33. Unserviceable brick tiles sqm 20.00 34. Unserviceable bib taps, stop cock, pillar tap, shower rose, Angle cock, Sink cock. Towel Rail Brass / CP Each 35.00 35. Old WHB with brackets Each 20.00 36. Unserviceable Steel sink Each 100.00 37. Unserviceable flushing cistern incl fitting Each 50.00 38. Unserviceable gate valves 20mm Brass Each 80.00 39. Old scrap steel / iron Kg 35.00 40. Unserviceable CI pipe 100/75 mm dia RM 100.00 41. Unserviceable CI fitting of any size Kg 30.00 42. Old U/S cat eyes of any description Each 10.00 43. Old U/S Delinator of any description Each 20.00 44. Old U/S Convex Mirror of any description Each 50.00 45. Brick Edging of any description RM 5.00 46. Old GI Tubing 15mm bore RM 20.00 47. Old GI Tubing 20mm bore RM 30.00 48. Old GI tubing 25mm bore RM 40.00 49. Old GI tubing 40mm bore RM 50.00 50. Old GI tubing 50mm bore RM 80.00 51. Old GI tubing 80mm bore RN 100.00 52. Old GI tubing 100mm bore RM 150.00 53. Old u/s Gate Valve 20mm die bore Each 35.00 54. Old u/s Gate Valve 25mm dia bore Each 45.00 55. Old u/s Gate Valve 40mm dia bore Each 82.00 56. Old u/s Gate Valve 50mm dia bore Each 100.00 57. Old U/s Sluice valve of 200mm die bore CI Each 750.00 58. Old U/s Sluice valve of 150mm dia bore CI Each 550.00 59. Old U/s Sluice valve of 100mm dia bore CI Each 350.00 60. Old U/s Sluice valve of 80mm die bore CI Each 250.00 61. Old U/s broken Cl/DI pipe of 200mm dia RM 300.00 62. Old U/s broken Cl/DI pipe of 150mm die RM 250.00 63. Old U/s broken Cl/DI pipe of 100mm dia - RM 150.00 64. Old U/s broken Cl/DI pipe of 80mm dia RM 100.00 65. Old Cl/DI fitting Kg 30.00 66. Old U/S Pump Shaft any type Each 105.00 67. Old U/s Brushes Each 22.00 68. Old U/s Impeller obtained from submersible pump set Each 100.00 69. Old U/s Impeller centrifugal / Non clog pump set Each 130.00 70. Old U/s thrust plate Each 10.00 71. Old U/s stage casing bowl Each 30.00 72. Old U/s Coupling assy Each 25.00 73. Old U/s thrust bearing housing Each 30.00 74. Old U/s Thrust pads Each 20.00 75. Old unsv tyre coupling Each 20.00 76. Old UNSV Star delta starter 40 HP Each 300.00 77. Old DOL Starter any type 10 HP Each 120.00 78. Run lead joint 80mm dia Each 40.00 79. Run lead joint 100mm dia Each 50.00 80. Run lead joint 150mm dia Each 60.00 81. Run lead joint 200mm dia Each 80.00 82. MS Spindle 100 mm Sluice valve Each 20.00 83. MS Spindle 150 mm Sluice valve Each 25.00 84. MS Spindle 200 mm Sluice valve Each 30.00 85. Submersible cable 16 sqmm 3 Core RM 25.00 86. Submersible cable 10 sqmm 3 Core RM 15.00 87. Old unsv MCCB Each 20.00 88. Old unsv earthing material Each 100.00 89. Scrap of unserviceable brass Kg 150.00 90. Old wooden or PVC or steel chowkhats with shutters n exc 1.5 sqm each incl iron mongery Each 400.00 91. Old skeleton shutters with iron mongery Each 300.00 92. Old Steel window with frame and shutter of any size complete Each 500.00 93. Old steel cupboard with frame and shutter of any size complete Each 250.00 94. Old steel ventilator of any size complete Each 200.00 95. Old curtain rod of any size description RM 5.00 96. U/s Old PVC water tank of capacity exc. 1000 litre 500 but n.exc Each 450.00 97. Old CI pipe 100 mm dia pipe of any description such as Nahani trap Bends TEE etc RM 100.00 98. Old PVC pipe for rain water of 110 mm dia or 75 mm dia of any size or description RM 25.00 99. Old looking mirror of any size/ description Each 10.00 100. Old grating of any size/ description Each 10.00 101. Old PVC connecting pipe of any size description Each 10.00 102. Old PVC pipe Bends pipe of 110 mm dia or 75 mm dia of any size description Each 5.00 103. Old U/S wiring with switches, sockets, ceiling roses, regulators etc Point 25.00 104. Old U/S Bulk Head Fitting Each 10.00 105. Old U/S Fan Regulator Each 5.00 106. Old U/S MCB DB TPN Each 50.00 107. Old U/S DB SPN 8 way Each 25.00 108. Old U/S MCB Each 2.00 109. Old U/S Sub main Wiring RM 10.00 110. Old Switch, socket, regular, regulator lamp holder, call bell etc Point 25.00 111. Old Unsv bldg security light Each 25.00 112. Old PVC doors Intl frame of any size Incl hardware etc 1.0 Sqm and n.exc 2.00 s.q.m Each 300.00 113. Old wooden door Intl MS frame of any size Incl hardware etc 1.0 s.q.m and n.exc 2.00 s.q.m Each 350.00 114. Old iron stone obtained from demolition of RCC work KG 30.00 115. Old red stone obtained from flooring of any description or size or thickness etc sqm 80.00 116. UNSV Old PVC water tank of capacity 200 to 500 litre Each 250.00 117. Old wooden windows of any description/size and hardware etc Each 150.00 118. Old u/s wall and ceiling boards any thickness, inc!uding cover fillets/frame work of any description Sqm 5.00 119. Old AC sheet or roof of any size Sqm 20.00 120. U/s EWC of any pattern Each 20.00 121. Old CI Cowl of any dia or description Each 30.00 122. Old Granite, Kota and marble etc of any size Sqm 30.00 123. Old U/s rolling shutter of any size or description Each 2000.00 124. Old u/s high level CI flushing cistern of any description Each 300.00 125. U/S light fittings tube light 4 feet Each 25.00 126. Old U/S PVC scrap Kg 20.00 127. Old Aluminum Scrap Kg 150.00 128. Old Copper Scrap Kg 380.00
Contract Date: Dec 15, 2025 Contract Value : 10.20 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
23.
Science and Technology #8342328 AOC
For Mics. Civil And Plumbing Works At Csir-Hrdc, Ghaziabad; 1 Sub-Head -I Repair and maintenance work 2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 3 All kinds of soil. 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to any level : 5 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 6 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 7 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 8 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 9 Centering and shuttering including strutting, propping etc. and removal of form for 10 Suspended floors, roofs, landings, balconies, lintel and access platform 11 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 12 Thermo-Mechanically Treated bars of grade Fe-500D or more. 13 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 14 Cement mortar 1:6 (1 cement : 6 coarse sand) 15 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 16 Cement mortar 1:6 (1 cement : 6 coarse sand) 17 Deduct using old bricks including cleaning mortar from the bricks as required. 18 Half brick masonry with common burnt clay F.P.S. (non modular) bricks f class designation 7.5 in superstructure above plinth level up to floor V level. 19 Cement mortar 1:4 (1 cement :4 coarse sand) 20 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, flooring and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 21 Granite stone slab of colour black, Cherry/Ruby red or any colour 22 Area of slab over 0.50 sqm 23 Providing edge moulding to 18 mm thick or above marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 24 Granite work 25 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 26 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 27 35 mm thick including ISI marked Stainless Steel havey duty 125mm long 04 nos. each door butt hinges with one side welded and other side necessary screws etc. 28 Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 29 25 mm dia 30 Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel chromium plating grade I as per IS: 1068 and fixing with necessary screws etc., complete. 31 Overall width 50 mm 32 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 33 40 mm 34 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. 35 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 36 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required in sampion colour or shade, with nuts and screws etc. complete : 37 250x16 mm 38 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 39 150x10 mm 40 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 41 Twin rubber stopper 42 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. 43 Double strip (horizontal type) 44 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineerin- charge. 45 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, includingcost of adhesive of approved quality as per direction of Engineer-in-Charge. 46 1.0 mm thick 47 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 48 With 2nd class teak wood beading 62X19 mm 49 Providing and fixing in wall lining / curtain hanger base medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination including PVC edge banding tape with hot glue by edge bending machine etc and necessary fixing arrangement and screws etc. complete. 50 18 mm thick 51 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 52 125 mm 53 100 mm 54 Providing and fixing 6mm thick both sides Pre-laminated cement bonded wood particle board as per IS : 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineerin- charge. 55 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including PVC edge banding tape with hot glue by edge bending machine etc. with nails,screws etc. complete as per direction of Engineer-in-charge. 56 Providing and fixing of stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 57 200mm 58 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. 59 Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: 60 Profile B 61 Fixing with adjustable lugs with split end tail to each jamb 62 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 63 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 64 Kota stone slab flooring and skirting over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 65 25 mm thick 66 20 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. 67 Red sand stone 68 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in any colours laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 69 Providing and laying Vitrified tiles in floor & skirting in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. 70 Glazed vitrified floor tiles polished finish of size 71 Size of Tile 600 x 600 mm 72 Glazed Vitrified tiles Matt/Antiskid finish of size 73 Size of Tile 600 x 600 mm 74 Providing and fixing 100 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 fine sand). 75 PVC pipe spout 76 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 77 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 78 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated J or L hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 79 2 mm thick flat 80 Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 81 10 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 82 12 mm cement plaster of mix : 83 1:6 (1 cement: 6 coarse sand) 84 12 mm cement plaster finished with a floating coat of neat cement of mix : 85 1:4 (1 cement: 4 fine sand) 86 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 87 Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand): 88 Flush / Ruled/ Struck or weathered pointing 89 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete to achieve even shade and colour: 90 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. 91 Finishing walls with Acrylic Smooth exterior paint of required shade : 92 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 93 Old work (One or more coat applied @ 0.90 ltr/10 sqm). 94 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 95 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 96 Repairing of washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge. (Including cost of required checking, scafolding and grooves). 97 Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 98 15 mm wide and 15 mm deep groove 99 Repairing / pointing of existing washed stone grit plaster groove size upto 20mm wide and 15mm deep on exterior walls height upto 10 above ground level including required scaffolding etc. with cement mortar 1:6 (1 cement: 6 coarse sand) and neat finishing the groove complete as per direction of the Engineer-in-charge : 100 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 101 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 102 Twoor more coats 103 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 104 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 105 [a] One or more coats on old work 106 French spirit polishing : 107 One or more coats on old work 108 Fixing chowkhat in existing opening in brick/ RCC wall with dash / hold fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash / hold fasteners as required. 109 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 110 Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 111 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 112 Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : 113 With F.P.S. brick tiles 114 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The Payment shall be made only once under the head of scaffolding for all works related to scaffolding, irrespective of the duration of the scaffolding. 115 Cleaning and desilting of mainhole, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. 116 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm. 117 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 118 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) 119 Nominal concrete 1:4:8 or leaner mix (i/c equivalentdesign mix) 120 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 121 In cement mortar 122 Dismantling tile / stone work in floors and walllaid in cement mortar including complete plaster and stacking material within 50 metres lead. 123 For thickness of tiles 10 mm to 25 mm 124 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 125 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 126 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 127 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 128 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required. 129 Bituminous portion with WBM 130 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :-Payment to be made per metre cost of total length of barbed wire used. 131 With G.I. barbed wire 132 Supplying and fixing with welded at site Angle iron post & strut of required size and shape including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. 133 Repairing with providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) 134 Providing and fixing Modi / Sant Gobain mirror of superior glass (of approved quality) and of required shape and size including reuired hole and fix with scews and screws top cover with dimond shape cap all complete. 135 Rectangular shape 1500x450 mm 136 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 137 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & all requiredfittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 138 Internal work- Exposed on wall 139 [a] 25 mm nominal outer dia Pipes 140 [b] 32 mm nominal outer dia Pipes 141 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & all required fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 142 Concealed work, including cutting chases and making good the walls etc. 143 [a] 20 mm nominal outer dia Pipes 144 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 145 32 mm nominal dia Pipes 146 Providing and fixing gun metal gate valve with C.I. wheel / Handle of approved quality (screwed end) : 147 25 mm nominal bore 148 65 mm nominal bore 149 80 mm nominal bore 150 Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : 151 Up to 300 mm dia 152 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : 153 Upto 80 mm diameter pipe 154 100 mm diameter pipe 155 150 mm diameter pipe 156 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 157 L D- 2.5 158 Rectangular shape 600x450 mm internal dimensions 159 Raising manhole cover and frame slab to required level including dismantling existing slab, complete manhole neat plaster and making good the damage as required (Raising depth of manhole to be paid separately) : 160 Rectangular manhole 90x80 cm with rectangular fram & cover 600 x 450 mm of grade LD - 2.5 161 Providing and fixing glazing in uPVC / aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . 162 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 163 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 164 With stainless steel cover plate minimum 1.25 mm thickness 165 Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) 166 Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric water proofing liquid (dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. 167 Providing and fixing following dia soil, waste and vent uPVC SWR pipes, ISI marked, conferming to 13592, Type B under ground or above ground level including jointing with seal ring and adhesive solvent for jointing all complete as per direction of Engineer-in-Charge.Make : Prakash /Supreme/ Ashirvad or equivalent. 168 [a]uPVC Pipe 110 mm dia pipe 169 [b]uPVC Pipe 75 mm dia pipe 170 Providing and fixing following dia soil, waste and vent uPVC SWR fitting, ISI marked, conferming to 14735 under ground or above ground level inccluding jointing with seal ring and adhesive solvent for jointing all complete as per direction of Engineer-in-Charge.Make : Prakash /Supreme/ Ashirvad or equivalent. 171 [1]uPVC fittings 110 mm dia 172 (a) Plain / door Bend 173 (b) Plain /door Tee 174 (c) Nahani Trap 110x110mm 175 (d ) Shocket 176 (e ) Multiconnector 110/75 177 [2]uPVC fittings 75 mm dia 178 (a) Plain / door Bend 179 (b) Plain /door Tee 180 (c) Nahani Trap 110x75mm 181 Overhouling of 150/100 mm dia inlet and outletC.I. / D.Isluice / gate valve including dismentaling of all parts and its assembly including re-assembling the valve with required new bolts, nuts,thick gas kit, oiling etc. and making smooth in the operation and fully functional all complete as required. 182 Repairing and jointing of 110 mm dia underground D.I pipe with D jointing kit including required pipe and its complete joint assembly and removing of water from the pit for execution of the work all compet as required. (Note: Excavation and refilling will be paid extra). 183 Providing and fixing of 10mm thick toughenedfrosted safety glassfor urinal partition of sizeheight 900mm, top width 500mm and bottom width 350mm including all required S.S.brackets, screws, edge round etc. all complete as per direction of EIC. 184 Cutting of core in RCC upto 150mm dia including all required machinary and tools etc. making good along the hole all complete per direction of EIC. 185 Providing and fixing 1.5mm thick LG make or equivalent (approved colour and shade) homogeneous Polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufcturer like Dunlop S-758, Fevicole SR-998 or equivalent including rolling with light wooden roller weighing about 5 kg all complete as directied by Engineer-in-Charge. 186 Replacement of white vitreous china under counterwash basin of approx. size 560x470mm with C.I. / M.S. brackets including removing of existing basin,painting of brackets, cutting and making good the walls wherever required all complete as per direction of EIC. 187 Providing and fixing as required size of C class G.I. pipes in pump house including required G.I. fittings like elbow, socket, Tee etc. including dismentaling of exsting GI/MS pipe and re-arranging the existing pipes all complete as required. 188 65 mm dia nominal bore 189 80 mm dia nominal bore 190 110 mm dia nominal bore 191 Replacement of existing damaged 150mm dia pipe between RCC wall from underground water tank to pump house outlet connection pipe with new C class GI pipe, 150mm dia and 750mm long pipe including dismantaling of old pipe and fixing of new pipe with welded the steel bar of RCC wall, fixed with cement concret 1:1:2 (1 Cement: 1 coarse sand (zone-III) derived from natural sources : 2 graded stone aggregate 20 mm nominal size derived from natural sources) repairing of both side as required and water proofing the nearby area with water proofing compound making leakage free connection all complete as required. 192 Providing and fixing of MS cast 100mm dia plug / dead nut for GI pipe all complete as required. 193 Sub-Head-II Provision of the routine maintenance items 194 C.P. brass bib cock / Long body 15mm nominal bore 195 C.P. brass long nosal central hole wash basin pillar cock 15mm nominal bore 196 C.P. brass angle valve 15mm nomonal bore 197 C.P. brass Toilet paper holder 198 C.P. brass 450 mm long towel rail 199 EWC Sheet Cover (soft) with connections hinge any colour 200 PVCJet with flexible tube aprrox. 1 metre 201 PVC Health Faucetwith flexible tube approx. 1 metre 202 PVC connection pipe 15mm nominal bore with PVC unionsupto 60 cm length 203 Semi Rigid PVC waste pipe for sink and wash basin 32 /40 mm dia with length not less than 700 mm i/c PVC waste fittings 204 PTMT grating circular type 100mm nominal dia 205 PTMT 25mm Ball cock with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 206 PVC water tank outer thraded base fram & cover 207 CPVC gate valve 32 mm nominal bore 208 CPVC gate valve 25 mm nominal bore 209 CPVC gate valve 20 mm nominal bore 210 Half / quarter turn Brass Phase (Heavey duty) 211 EWC cystern syphan glass 212 EWC cystern Flush button 213 EWC sheet cover hing 214 Teflon tap 215 Bamboo ladder more than 18 steps 216 White Cement 217 Black Cement 218 Coarse Sand 219 Mason / Carpenter 220 Beldar 221 Sub Head -III Buy Back As is where is basis 222 (a) Brass (bib cock,anglevalve, stop cock, phase, gate valve ) 223 (b ) MS window fram, shutter,Jali , angles, MSbars/ scraps, door handles & clock, false ceiling gride, barbed wire, GI duct etc. 224 (c) Wooden shutter andframs 225 (d) Aluminium door / windows
Contract Date: Nov 28, 2025 Contract Value : 29.97 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Uttar Pradesh View Result →
24.
Public Administrative Department #7586661 AOC
Tender For Auction of unused store items/ scrap -- 1 Instrument scrap 2 Electrical Scrap 3 Motor Scrap/dyno drive different hp 4 Old battery 18,26,180AH (wet + dry) 5 Welding set Aluminum. 6 Damage Cutting torch/ Ragulator 7 Teen Topra G.I/M.S 8 M.S Scrap 9 Aluminum Scrap (tin) 10 Nickel Screen 11 Bearing & Sleeve Scrap 12 S.S screen & Tube 13 M.S /Plastic Drum 200ltr. 14 Plastic Cane 50ltr. 15 Almirah Scrap Tin 16 Folding Bed 17 Gun Metal Chips 18 Gun Metal/Old Pump 19 S.S. Scrap 20 Damage Tizori 21 M.S. Shaft 40C8 (size 400 x 3000 MM) 22 M.S. Shaft 40C8 (different size) 23 Damage FMG Gear Box 300 HP (big size) 24 Damage planetary gear box and different size, reduction gear 25 Good Condition Gear Box 800 HP, Make Walchand Nagar, Fabricated body- 2 Nos. 26 Turbine SS6A, Make belliss with gear & bed- 2 Nos. 27 Damage power turbine HES-14, Make Belliss with gear & bed- 1 No. 28 Bag Stitching Machine 5 Nos. 29 Weighbridge 4 Nos. (10 Ton Capacity) 30 Ratoon Management Device (RMD) 02 Nos. 31 Power Spray Pump, 01 Nos. 32 Simple Ridger, 01 No. 33 Locks 34 Table (Steel/Wood) 35 Computer Set 36 Printer 37 UPS 38 Wall Fan 39 Almirah 40 Fax Machine 41 Stool Iron 42 Inverter 43 Mattress 44 Refrigerator 45 Sign Board 46 Folding Bed 47 Exhaust Fan 48 Geyser 49 TV with Trolly 50 LCD 51 Trolly of TV 52 Hot Air Blower 53 Laptop 54 Hooka 55 Mosquito Refuelent 56 Incumbancy Board 57 Omni Antena 58 Access point memo client status 59 Air Cooler 60 Fiber Chair 61 Mobile (Oppo) 62 AC (Window) 63 AC (Split)
Contract Date: Jul 11, 2025 Contract Value : 31.93 Lakh
Cooperative No of Bidders 8
26.
Defence #5071752 AOC
Supply Of Raw Materials Required For The Manufactory Sections In Various Prisons Across Tamilnadu For The Year 2024 2025 Supply Of Raw Materials And Other Miscellaneous Articles Required For The Manufactory Sections In Various Prisons Across Tamilnadu For The Year 2024 2025 , Central Prison-I, Puzhal Group : B - Other Miscellaneous Articles , Disposable Shaving Razor , Central Prison-I, Puzhal Group : C - Weaving Industry , 2/17S Yarn [Cotton] In Cone - Bleached , 20S Yarn [Cotton] In Cone - Bleached , Central Prison-I, Puzhal Group : D - Book Binding Industry , Card Board -2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Card Board- 2 Lbs , Central Prison-I, Puzhal Group : E - Tailoring Industry , Pencil Black , 80S White Polyester Cotton Thread - 300 Mtrs , 80S Khaki Polyestercotton Thread - 300 Mtrs , White Nylon Button 4 Holes , 60S Overlock Polyester Cotton Thread , 40S Overlock Polyester Cotton Thread , 40S Polyester Cotton Reels White - 300 Mtrs , Khaki Colour Coat Button (As In Praga Brand Or Equivalent) With 4 Holes , White Colour Coat Button (As In Praga Brand Or Equivalent) With 4 Holes , Rain Coat Cloth (Khaki Colour) , Rain Coat Cloth (White Colour) , Thread Graphic 4 Ply (As In Madura Coats Or Equivalent ) , Plastic Buckles - Khaki , Plastic Buckles - White , Reflective Tape White / Orange Colour , Candle , Flourescent Screen Printing As Police In Orange Colour , Velcro 1 , Central Prison-I, Puzhal Group: G - Tag Industry , Gi Sheet , Ribbon Of Colours , Central Prison-I, Puzhal Group : H - Sealing Wax Industry , Rosin , Shelloc Red , Red Vermillinpowder , Chalk White Powder , Firewood , Castor Oil , Central Prison-I, Puzhal Group: K - Shoe Polish Industry , Shoe Polish - Black , Shoe Polish - Dark Tan (Dark Brown) , Logo Printed Pressing Type Polish Container (Material Tin) , Aluminium Foil , Flat Plastic Winding Chord , Press Clip , Hand Gloves , Mask Equivalent To N95 , Brown Adhesive Tape Roll , Corrugated Boxes (345 X 345 X 310 Mm) -5Ply , Central Prison-I, Puzhal Group : M - Printing Press Unit , Chart Paper - Mg Maplitho , Ink Black , Ink Meganda , Ink Cyan , Ink Royal Blue , Gp Plate Cleaner , Ultra Font , Plate Delete Equivalent Technova , Ink Knife , Reducer , Cellulose Sponge , W. Wash , Benzeen , Gear Oil , Domponing Cloth , Central Prison-I, Puzhal Group : V - Mosquito Net , Mosquito Net Cloth - 135 Cm Width , 80S Khaki Polyestercotton Thread - 300 Mtrs , Central Prison-Ii, Puzhal Group : B - Other Miscellaneous Articles , Disposable Shaving Razor , Central Prison, Vellore Group - A : Industrial Spare Sub Group - A1 : Weaving Industry Spare , Shuttle , Picker , Buffer , Healds , Pirns 7 , Picking Band , Picking Stick , Picking Spindle , Shuttle Box Spring , Check Strap , Nylon Rope , Central Prison, Vellore Group - A : Industrial Spare Sub Group -A2 : Boot Industry Spares , Pincers (Boot Industry) , Shoe Hammer , Chucklers Knife , Bobbins Weaving , Engine Oil , Grease , Hydraulic Oil , Belt Cutting Knife , Teflon Roller For Belt Cutting Machine , Skiving Machine Belt Knife , Clicking Machine Teflon Board , Shoe Box , Shoe Pairing Thread , Nylon Thread For Belt Tying , Emery Sheet For Full Shoe Making Machine , Skiving Machine Grinding Stones , V Belt For Stitching Machine , Old News Paper , Teflon Cloth For Mulling Machine , Felt Sheet For Mulling Machine , Bladder For Sole Pressing Machine , Halogenation Tube , Central Prison, Vellore Group - A : Industrial Spare Sub Group -A3 : Book Binding Industry Spares , Paper Cutting Blade , Central Prison, Vellore Group- B : Other Miscellaneous Articles , Disposable Shaving Razor , Jute Twine , Hessain Cloth , Polythene Paper , Central Prison, Vellore Group- C : Weaving Industry , 2/17S Yarn [Cotton] In Cone - Bleached , 20S Yarn [Cotton] In Cone- Bleached , Central Prison, Vellore Group -D : Book Binding Industry , Card Board - 2½ Lbs (13½X 9) , Varnished Marble Paper , Khaki Craftpaper , Tapioca Flour , Copper Sulphate , Calico , White Paper , White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Card Board - 2 Lbs , Central Prison, Vellore Group -F : Carpentry Unit , Wood Adhesive , Sand Paper ( S ) , Sand Paper ( R ) , Turpentine , G.T.Polish , Nails - 1 , Nails - 1 ½ , Screw - 1 , Screw - 1 ½ , Screw - 2 , Nylon Wire , Sand Paper Disc , Bee Wax , Bush , Thinner , Central Prison, Vellore Group - N : Boot Industry Central Prison, Vellore Sub Group : N1 - Black Shoe For Men Specifications For Leather Cut Components For Black Leather Shoes With Tpr Bottom Sole , Central Prison, Vellore Sub Group - N2 : Brown Shoe For Men Specifications For Leather Cut Components For Brown Leather Shoes With Tpr Bottom Sole , Central Prison, Vellore Sub Group - N3 : Black Ammunition Boot Specifications Of Leather Cut Components For Black Ammunition Boots With Tpr Bottom Sole , Central Prison, Vellore Sub Group - N4 : Brown Ammunition Boot Specifications For Leather Cut Components For Brown Ammunition Boots With Tpr Bottom Sole , Central Prison, Vellore Sub Group - N5 : Brown Zip Boot Specifications For Leather Cut Components For Brown Zip Boot With Tprbottom Sole , Central Prison, Vellore Sub Group - N6 : Black Shoe For Women Specifiations For Leather Cut Components For Black Leather Shoes Withtprbottom Sole For Women , Central Prison, Vellore Sub Group - N7 : Brown Shoe For Women Specification For Leather Cut Components For Brown Leather Shoes With Tpr Bottom Sole For Women , Central Prison, Vellore Sub Group - N8: Manufacturing Of Leather Cut Components , Brown Upper Leather , Toe Plain Leather , Sole Cleaning Solvent , Full Shoe Adhesive 1 , Full Shoe Adhesive 2 , Shoe Lasting Adhesive , Socks Adhesive , Central Prison, Vellore Sub Group : N9 - Manufacture Of Uniform Belts , Kattai Leather - Even Thickness 3 Mm. , Buckles For Police Contables , Buckles For Police Contables (Chennai City Police) , Buckles For Officers - Police, Fire, Prisons , Buckles For Cross Belt , Buckles For Prison Warders , Buckles For Prison Officers , Buckles For Fire Officer , Central Prison, Vellore Sub Group : N10 - Raw Materials Required For Manufacturing Shoes & Boots , Black Upper Polish , Brown Upper Polish , Black Shoe Lace , Black Shoe Lace For Boot , Brown Shoe Lace , Brown Shoe Lace For Boot , Air Staples Pins Gi 97/12 , Air Staples Pins Gi 98/12 , Black Wax Nylon Thread , Hardener , Ball Revit Screw Type (Steel) , Rivit Button 9 Mm & 7 Mm , Central Prison, Cuddalore Group A : Industrial Spares Sub Group A1 : Weaving Industrial Spares , Shuttles Of Sizes , Chrome Picking Band , 4B Nylon Pickers , Picker Bush No.2 , Shuttle Box Spindle , Machine Oil , Shuttle Box Spindle Temple Plate , Leather Belt , Round Rope Of Pickers , Shuttle Box Whole Bottom Bolt & Nut , White Nylon Gunny Bags , 32 Nos. X 54 Read , 40 Nos. X 54 Read , Pick Wheel Adjustment Lever , Beam Pipe , Shuttle Kambam , Shuttle Clip , Box End Spring , Picking Powl , Spring Picking , Winding Spindle , Winding Oost Collar , Read Spring , Spring , Pirns , Aluminum Held Frame , Nylon Buffer , No.32 Pick Wheel , Mul Role Size , Central Prison, Cuddalore Group A : Industrial Spares Sub Group A2 : Tailoring Machine Spares , Tailoringmachine Needle (Brass ) Size 110/18 , Tailoringmachine Needle (Brass ) Size 110/16 , Tailoringmachine Teeth , Tailoringmachine Foot , Tailoringmachine Plate , Tailoringmachine Belt , Tailoringmachine Tension Spring , Tailoringmachine Bobbin , Tailoringmachine Case , Tailoring Machine Shetle , Tailoringiron Box Heavy Belmont , Tailoringemming Machine Needle 110/18-110/16 , Post Bed Machine Needle No 140/22 , Post Bed Machine Needle No160/22 , Post Bed Machinebobin Case , Tailoring Scissors 12” (Steel) , Tailoring Scissors 10” (Steel) , Tailoring Scissors (Plastic Handle) 10 , Tailoring Drimmer , Tailoring Nose Player , Cloth Cutting Machine H.S.S. Blade , Cloth Cutting Machine Round Stone , Cloth Cutting Machine Carbon , Cloth Cutting Machine Gear Set , Eyelet Punch , Leathercutting Knife , Leather Cutting Knife Blade - 20 Cm , Leather Cutting Knife Blade- 10 Cm , Kithon Gunney Bag , Tailoring Emming Needle 7.5 Cm , Tailoring Emming Needle 12.5 Cm , Cloth Cutting Machine Belt 120 Xl , Cloth Cutting Machine Belt60 Xl , Cloth Cutting Machine Greeze , Cloth Cutting Machine Wheel Set , Post Bed Machine Belt No.220 Xl , Leather Cutting Machine Bush , Post Bed Machine Shetle , Central Prison, Cuddalore Group A : Industrial Spares Sub Group : A3-Carpentry Unit Spares , Planning Machine Tip Blade , Planning Machine Tip Blade , Hand Planning Machineblade , Planning Machine Belt , Wood Cutting Blade , Grinding Stone , Wood Cutting Machine Blade , Drill Bit , Star Bit , Round Emery Sheet 5” No.80 , Round Emery Sheet 5” No.120 , Metal Paste , Sheeler , Paint , Star Screw , Brush 2” , Brush 1” , Band Saw Machine Blade Length 23’ Breath3” , Band Saw Machine Blade Length 33’ Breath 3” , Band Saw Machine Belt 70” , Red Acid , Hand Planning Machine Blade , Wood Turning Lathe Chisel , Rubber Band , Central Prison, Cuddalore Group - B: Other Miscellaneous Articles , Disposable Shaving Razor , Central Prison, Cuddalore Group - C : Weaving Industry , 2/17S Yarn [Cotton] In Cone - Bleached , 20S Yarn [Cotton] In Cone - Bleached , Central Prison, Cuddalore Group : F - Carpentry Unit , Indian Teak Wood-Width Oues 25 Mm Upto And Inclusiveof 155 Mm , Indian Teak Wood - Width Oues 155 Mm Upto And Inclusive Of 230 Mm , Indian Teak Wood - Width Oues 255 Mm Upto And Inclusive Of 330 Mm , Indian Teak Wood - Width Oues 330 Mm Upto And Inclusive Of 410 Mm , Drawer Lock (Brass) , Shelf Lock (Brass) , Screw - 12 Mm , Screw - 15 Mm , Screw - 20 Mm , Screw -30 Mm , Screw - 35 Mm , Wire Nailsof All Sizes , Hinges (Keel) - Iron Nickel Plate , Khanji Hook , Sand Paper , Sand Disk , Wood Adhesive , Bees Wax , Cocount Fibre , Turpentine , Pin Nail Of All Sizes , Nylon Wire , G.T.Polish , Ply Wood - 6 Mm , Ply Wood - 10 Mm , Ply Wood - 19 Mm , Laminated Sheet Of Colours , Quick Fix (Sr) - 998 , Fevicol , Tower Bolt - 3 Inch , Tower Bolt - 4 Inch , Tower Bolt - 6 Inch , Tower Bolt - 8 Inch , Bush - ½ Inch , Bush - ¾ Inch , Bush - 1 Inch , Bush - 1 ¼ Inch , Bush - 1 ½ Inch , Bush - 2 Inch , Bush - 2 ½ Inch , Design Beading - 3/4 Inch , Roller Beading 2 Inch , Handle (Brass) - 3 Inch , Handle (Brass) - 4 Inch , Handle (Brass) - 6 Inch , Arabite , Pinckeel (S.S. Type) - 1 Sq. Ft. , Mirror - 4 Mm , Mirror - 5 Mm , Cot Clamp Set , Central Prison, Cuddalore Group: O -Cap Industry , Blue Colour Tc Cloth , Rexine - Brown Colour , Leather (Light Brown/Black Colour) , Kithan Coney , 1½ Lb Fibre Sheet , Polythene Thick Paper , Eyelets - Black Coated , Sponge 10 Mm , Nickle Emblem Button , Gum Packet , Piping Thread , No. 40 Nylon Thread- 1500 Metres , Bale Thagadu , Lining Cloth , Velvet Cloth , Multi Grip Sr 97 (Synthetic Rubber Adhesive Foot Wear) , Brass Dress Hook , Polythene Cover (For Packing Uniform Caps) , Packing Tape Roll - 2 Width, Glass White, Cello Tape , Iron String , Thread - (Blue/Red/Khaki) 150 Metres , Nylon Yarn (Narambu) Yellow Colour , Carton Box (For Packing) (Size:630Mm X 600Mm X 450Mm) , Plastic Shade - Used In Stitching Uniform Caps , Tailoring Machine Oil , Pencil (White) , Tailoring Marker Permanent Pen , Black Polyester Thread ( 1500 Mtrs) 3 Ply , Red Cotton Rope , L Sheet 2Mm , Deece , Blue Plastic Ribbon , Military Cloth , Hood (Ash, Black, Maroon, Khaki, Blue) , Cotton Pad , Dori , Lupe , Ribbon - Black , Tahpta (Silk Cloth) , Tapioca Flour , Black Net , Central Prison, Cuddalore Group: P - Lathi With Thong Industry , Bamboo (Cane) Lathi (Radon Variety) , Peril (Brass) , Thong Kattai Leather , G.T. Polish (Wood Polish) , Synthetic Rubber Adhesivemulti Grip Band - Al 905 , Sand Paper , Central Prison, Trichy Group A : Industrial Spares Sub Group : A1- Weaving Industrial Spares , Weaving Shuttle 14 ½ For Power Looms , Wire Heels (Bandage & Gauze Cloth Making) , Wire Heels (Cumbly Making) , Steel Reeds (Bandage & Gauze Cloth Making) , Steel Reeds (Cumbly Making) , Picker Kattai , Picker Kattai Bush , Picker Steel Rod , Weft Pin , Bobbins Of Sizes 4 ½ X 3 ½ , Hand Leather , V. Belt A.86 , V. Belt A.88 , Meter Scale (Brass) , Nylon Rope , Wooden Hand , Monkey Tail Lever And Bush , 8 Picking Bowl Bolt , Picker Soft Wheel 1 1/2 , Shuttle Stick , Reed Spring 12 , Leather Belt 1 , Box End Spring , Weft Pin Needle , Compound Wheel Stud , Quadrant Bracket Rh, Lh , Cloth Roll Spring , Warping Beem Pipe Set , Crank Arm Pin Bit , Crank Soft Gm Baring , Picking Spring , Starter With Breaker , Beam Cup Bracket Rh, Lh , Picking Nose Rh, Lh , Picking Plate Rh, Lh , Stop Rod Spring , Cloth Roll Plate , Oscillating Lever Rh, Lh , Oscillating Cam , Plain Two Thread Top Pet , Cotton Pin , Compound Wheel 89T , Warping Beem Stand , V- Belt A57 , Treadle Lever, Bowl, Bowl Pin , Break Wheel, Shoe , Change Wheel 50T , Cannon Bracket Rh, Lh , Beam Reffles , Tappet Shaft Stay And Bush , Bolt Nut Different Size (¾, 1, 1½, 2½, Etc., ) , Motor Fan 1 Dia , Central Prison, Trichy Group A : Industrial Spares Sub Group : A2- Tailoring Industrial Spares , Sewing Needle - No.18 , Sewing Oil , Needle Stem , Needle Plate , Shuttle , Bobbin (Silver) , Horse Pedal , Bobbin (Case) , Horse Pedal Rod , Motor Belt , Motor Condenser , Scissiors 10 , Scissiors 12 , Iron Box (Brass) Branded , Oil Seal (Brother Machine) , Overlock Needle , Overlock Looper , Kaja Needle , Central Prison, Trichy Group A : Industrial Spares Sub Group : A3- Soap Industrial Spares , V Belt B62 , V Belt B63 , V Belt B55 , V Belt B66 , Gear Box Oil 90 , Gear Greeze (Yellow Colour) , Different Shape Dye(Soap Weight 75 Grams) , Iron Bucket 12 , Iron Bucket 14 , Central Prison, Trichy Group A : Industrial Spares Sub Group : A4- Binding Industrial Spares , Gear Box Oil , V Belt B72 , V Belt B105 , Paper Cutting M/C Blade , Paper Cutting M/C Blade , Paper Cutting M/C Blade , Central Prison, Trichy Group : B - Other Miscellaneous Articles , Char Coal , Soda Ash - Washing Soda , Dhoby Blue , Jute Twine , Hessain Cloth , Disposable Shaving Razor , Central Prison, Trichy Group : C - Weaving Industry , 2/17S Yarn [Cotton] In Cone -Bleached (Cone Weighing 1 Kg) , 20Syarn [Cotton],In Cone -Bleached (Cone Weighing 1 Kg) , Woollen Yarn -Blue , Woollen Yarn - White , Woollen Yarn - Red Colour , Woollen Yarn - Green Colour , Woollen Yarn - Yellow Colour , Central Prison, Trichy Group : D - Book Binding Industry , Card Board - 2½ Lbs (13½X 9) , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Cardboard - 2 Lbs (3 X 2) , Central Prison, Trichy Group : F- Carpentry Unit , Indian Teak Wood - Width Oues 25 Mm Upto And Inclusiveof 155 Mm , Indian Teak Wood - Width Oues 155 Mm Upto And Inclusive Of 255 Mm , Indian Teak Wood - Width Oues 255 Mm Upto And Inclusive Of 330 Mm , Indian Teak Wood - Width Oues 330 Mm Upto And Inclusive Of 410 Mm , Drawer Lock , Shelf Lock , Screw -12 Mm , Screw -15 Mm , Screw -20 Mm , Screw -30 Mm , Screw -35 Mm , Wire Nails Of All Sizes , Hinges (Keel) , Khanji Hook , Sand Paper , Sander Disk , Wood Adhesive , Bees Wax , Cocount Fibre , Turpentine , Pin Nail Of All Sizes , Nylon Wire , Wood Polish , Ply Wood - ¾ , Ply Wood - 6 Mm , Ply Wood - 10Mm , Laminated Sheet Of Colours Sun Glass Mica 1Mm , Quick Fix (Sr) , Central Prison, Trichy Group : O - Cap Industry , Hood (Khaki & Blue) , Thread - Khaki & Black 150 Metres , Tahpta (Black Silk Cloth) , Cotton Pad , Dori (Black Rope) 1/4 Dia , Lupe 2 ½ X 1 ¼ , Ribbon - Black 1 , Eyelets , Polythene Cover (For Packing Uniform Caps) , 44 Blue Drill Cloth Cotton With Polyster , Thread - Blue 150 Metres , Zip - No.8 Blue , Runner - No.8 Blue , Blue Drawer Button , Sticker (Size) , Central Prison, Trichy Group : Q - Soap Industry Sub Group : Q1 - Soap Industry - Washing Soap , Silicate Ofsoda , Rosin , Soap Yellow Powder , Illuppai Oil , Castor Oil , Neem Oil , Coconut Oil , Caustic Soda Flakes , Fire Wood , Salt , Central Prison, Trichy Group : Q - Soap Industry Sub Group - Q2 : Toilet Soap Industry , Premium Soap Noodles , Talc 500 Mesh , A.O.S. Paste (Alpha Olefin Sulfonate Paste) , Different Colour Of Powder , Liquid Perfume (Different Flavour) , Packing Box For Soap With Printing (16 X 12) , Glue Construction 2 Cello Tape, White Glass Colour , Carton Box (120 Gsm) (13X106) 3 Ply , Central Prison, Trichy Group : Q - Soap Industry Sub Group - Q3 : Detergent Soap Industry , Acid Silury , Sodium Poly Phosphate , Dolamate Powder , Calcite Powder , China Clay Powder , Aluminum Sulphate , Iti Blue Colour , Soap Packing Paper With Printing , Carton Box (120 Gsm) (15X106) 3 Ply , Central Prison, Salem Group : A - Industrial Spares , Weaving Shuttle , Wire Heelds , Read Spring , Picking Arm Spring , Spindle Stud Nylon , Spindle , Spindle Stud Bolt , Weft Fork (Left & Right) , Shuttle Tunk , Picking Powl Bolt , Picking Powl , Picking Arm , Picking Nylon Strap , Box End Spring , Cheek Strap Bolt , Weft Grid (Right & Left) , Perforated Steel Strips , V - Belt , Picker , Pirn , Buffer , Yellow Grease , V- Belt For Compressor A - 50 , Grinding Wheel Dia 12 X 1 1/2 Thickness (Rough) , Grinding Wheel Dia 12 X 1 1/2 Thickness (Medium) , Air Compressor Oil (Viscosity 20W X 40) , Mask (Industrial Use) Equalant To N 95 , Carbon Bush Gws 24 - 180 Jz, 180Mm (Angle Grinder) Ag 7 , Pilot Spray Gun No.64 , Welding Holder , Welding Shield With Glass Standard Size Set Of 3 Glass (German Glass 1, White Glass 2) , Welding Flexible Copper Single Cable , Pvc Compressor Air Hose Flexible Pvc / Polumers Inner Dia Meter - 8Mm Outer Dia Meter - 19Mm (Or) 3/4 Inch , Coconut Oil , Steel Reads Of Sizes 36S, 32S Indian Make , Swal Spring , Running Mess , 12 Rubber Cut Field Belt , 10Mm Packing Rope , Blue Mess , 2 1/2 Bearing With Shield Type , 3 Bearing With Shield Type , 3 1/4 Bearing With Shield Type , Mobile Oil ( Heavy Viscosity) , Central Prison, Salem Group : B - Other Miscellaneous Articles , Disposable Shaving Razor , Hessain Cloth , Jute Twine , Central Prison, Salem Group : C - Weaving Industry , 2/17Syarn [Cotton]In Cone - Bleached , 20S Yarn [Cotton] In Cone - Bleached , Central Prison, Salem Group : D - Book Binding Industry , Card Board - 2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Fire Wood , Card Board - 2Lbs , Central Prison, Salem Group : T - Black Smithy Industry , Gi Wire 10G (Galvanised Iron) 3.25 Mm , Emery Cloth Of Grades , 10G Welding Electric Rods , 12 Flat Files , Charcoal , Paints Of Colours (Equivalent To Delux) , Bp Sheet 10 G (Or) 3 Mm , Cr Plain Sheet - 16 G Or 1.63 Mm , Cr Plain Sheet - 18 G Or 1.22 Mm , Ms Channel - 35Mm X 70Mm X 35 Mm , Ms Angles 1 X 1 X ¼ , Ms Angles 1 X 1 X ? , Ms Angles 35Mm X 35Mm X 5Mm , Ms Flat - 1 X ? , Ms Round - Dia ¼ , Ms Round - Dia ? , Ms Round - Dia ½ , 24 Gor 0.56 Mm G.I.Sheet , Thinman Rivites No.12 - Iron , Kniffing Paste Filler (Patti) , Cr Pipe- Dia 18 G -1 , Cr Pipe - Dia 18 G-? , Hinges - 50 Mm , Hinges-75 Mm , White Metal Primer , Thinner , Bolt & Nut-¾ X ? , Bolt & Nut-1 X ? , Bolt & Nut -3 X ? , Bolt & Nut -4 X ? , Painting Brush - 20 Mm , Painting Brush - 30 Mm , Painting Brush - 60 Mm , Painting Brush - 75 Mm , Nylon Bush - (Black / White Colour) (Or) Rubber Bush (White Colour) , L Angle Bush Nylon Bush Innersizes 1 X 1 X 1/8 , 2 Trolley Ball Type Wheel7/8 Pillar Type , 4 Trolley Wheel 7/8 Pillar Type (Length Of Sizes) , Goggles , Drill Bit Of Sizes3/16 , Drill Bit Of Sizes¼ , Drill Bit Of Sizes? , Drill Bit Of Sizes½ , Drill Bit Of Sizes11mm , Sandar Disc 7 , Hacksaw Blade ½ , Hand Gloves (Leather Set) , Goggles (Leather) Grinding Purpose Standard Size , Central Prison, Salem Group - U: Stainless Steel Industry , Stainless Steel Coil Sheet , Fibre Wheel - 2 ½ Dia X 2 Thickness , Fibre Wheel -3 Dia X 2 Thickness , Fibre Wheel3 Dia X 3 Thickness , Fibre Wheel Dia 1, 2 & 4 To 12 , Stainless Sheet Circle , Mob Circle (Cloth Wheel) 2 ½ Dia X 2 Thickness , Mob Circle (Cloth Wheel) 3 Dia X 2 Thickness , Mob Circle (Cloth Wheel) 3 Dia X 3 Thickness , Mob Circle (Cloth Wheel) Dia 1, 2 & 4 To 12 , Emery Soap , Green Soap , Chalk Powder , Packing Cover , Rubber Rolling Sheet , Stainless Steel Coil Sheet For Mugs Handle , Welding Rod - Stainless Steel 10 G , Welding Rod - Stainless Steel 12 G , Lubricant Oil , Corton Box(2 X 3 X 2) , Cutting Tool Bit For Turning Machine And Spinning Machine , Hand Gloves - Leather , Central Prison, Coimbatore Group : A - Industrial Spares Sub Group : A1 - Weaving Industrial Spares , Picking Bowls With Stud Bush And Nuts , Spindle Studwith Bolt And Nut , Pin For Crank Arm , Zip For Crank Arm. , Gun Metal (Bush) Steps For Crank Arm , Treadle Bowls With Centre Pin , Tappets Plain , Weft Forksleft And Right , Shuttle Box Spindles 21 , Shuttle Box Spindles 22 , Perforated Steel Strips - 10/21 Size , Leather Lace , Chrome Picking Band , V. Belta .70 , V. Belt A 73 , Leather Belting Of Sizes , Leather Belting Of Sizes , Shuttles Of Sizes , No Volt Coil Lt / Lktype Mk 1 -400To440 Volts , Aluminium Heald Frames Of Sizes , 6 Weft Pirn , All Metalreed With Adopters 56S X 45 , Warp Stop Motion Droppers (0.8 X 11 X 125) , Noigen Wsl , Anilose E , Mutton Tallow , Goshnol , Carboxy Methylcellulose M Vb , Preservative Bdm , Gum Cesaltex , Alfloc Powderno.101 , Alfloc Powder No. 28 , Technopal , Compal R 300 , Machinery Oil , Synol , Synthosize , Synthowet Oil , Shuttles Of Sizes , Drawing Hooks , Shuttle Pegs , Shuttle Clips (Flat Type) , Shuttle Clips (Wire Type) , Spring Picking , Shuttle Tongue , Servo System 100 Oil , Leather Belting Of Sizes , Carded Belt Hooks No.5 , Nylon L Brackets For Check Straps , Picking Sticks-72Cm , Picking Sticks-78 Cm , Transformer Oil , Asbestos Rope ½ , Graphite Rope ½ , Steel Reeds Of Size 40S X 80 , Steel Reeds Of Size 28S X 90 , Steel Reeds Of Size 40S X 90 , Steel Reeds Of Size 80S X 45 , Steel Reeds Of Size 44S X 80 , Steel Reeds Of Size 40S X 45 , Colour Crayons , V Belt A 75 , V Belt B 49 , S Type Nylon Buffers White , Nylon Pickers 4B White , Wire Healds 27G , Nylon Threaded Bush For Nylon Pickers , Picking Nose, Shell Boss With Bolts & Nuts , 7 Wheel Takeup Motion Complete Set Heavy Type , Contractor 32 Amp230 V Coil , Johnson Head Complete Assemble 1 H Sbf 3400/ Rhp 3400 Greames , Gear Tac Oil300 S , Servo System 32 , Hydraulic Oil , Servo Gem 2 , Shuttles - K Type , Shuttle Jaw , Shuttle Eye , Shuttle Tension Pin , Shuttle Screws , Shuttle Guide Pin , Weft Pirns For Ruti-C , Picker Haag , Double Lug Scrap , Long Lug Strap , Entry Roller , U Buffer , Anaband , Weft Tensioner , Zama Buffer Head , Zama Diaphram , Rubber Wiper Ring , Synthetic Ring , Steel Ring , Air Inlet Valve , Front Wall Leather -All Type , Picking Stick Wooden , Lugstarap Insert , Shift Lever Right/Left , Clamping Bush -10 Mm , Clamping Bush -12 Mm , Feeler Needle , Inside Weft Needle , Feeler Box , Shift Lever Spring Left/ Right , Picking Stick Spring - Left/Right , Reed Adopter , Perforated Steel Strips , Reeds For Ruti - C Looms , Heald Wires Forruti - C Looms , Droppers For Ruti-C Looms , Picking Wheel Shaft R , Warp Beam Bearing , Spur Gear 2.5 Z 29 , Ratchat Wheel Z 38 , Ratchat Wheel Z 62 , Cam Follower , Temple , Bevel Gear 3 Z 28 , Swing Arm Assembly , Picking Lever , Picking Stick Carrier , Box Plate Front , Picking Stick Guide F.L. Br , Sley Sward , Limiting Lever Carrier , Magnet Dc , Break Drum Head , Reversing Disk , Front Plate , Picking Wheel , Heald Frames For Ruti-C Looms , Leno Belt , Selvedge Cutter , Stable Hooks , Reeds , Air Hoses , Temple , Compressor Oil (Synthetic) , Separator , Air Filter , Oil Filter , Compresser Belt , Ball Joint Sf 12 , Pawl Spring , Pawl Rod , Square Support , Cap Screw (10*30) , Activating Rod , Swing Arm Bracket , Harness Frame Cable , Hex Head Screw (14*50) , Grease Nipple No.18 , Grease Nipple No.78 , Torsion Spring (Right & Left) , Picker , Picking Stick Lining , Tongue Roller & Bush , Bearing Bush , Hex Head Screw(6*8) , Cylinder Bush No.16 , Hex Head Cap Screw (6*18) , Spring Washer No.6 , Tension Rail Assly , Hex Head Screw (10*25) , Flat Spring , Needle Bearing Bush , Grub Screw 8*8 , Hex Head Screw 5*18 , Spring Tentioning Bush , Spacing Ring , Stopping Finger , Micro Switch , Bevel Gear 70T , Bevel Gear 28T , Starting Lever With Handle , Activating Lever Bearing , Needle Bearing Hr 2216 , Beam Shaft , Crank Wheel , Sley Profile , Sley Stiffner , Washer , Spacing Plate , Head Screw Hex (10*70) , Piston , Cable Clamping Full Set , Central Prison, Coimbatore Group : A - Industrial Spares Sub Group : A2 - Tailoring Industrial Spares , Bobbin , Bobbin Case , Overlock Machine Needle , Tailoring Belt , Singer Machine Needles , Kaja Machine Needles , Pressure Foot (Horse) , Singer Oil , Shuttle (Juki Sewing Machine) , Teeth Plate , Bobbin Loader (Juki Sewing Machine) , Power Switch (Juki Sewing Machine) , Pedal Setting Sheet , Tension Sheet , Button Machine Capture (Juki Machine) , Kaja Machine Blade 1 , Kaja Machine Blade 1 1/2 , Button Machine Tension Sheet , Button Mahine Cutter , Over Lock Machine Blade , Kaja Machine Bobbin Case , Scissors 10 , Scissors 12 , Mending Cutter , Central Prison, Coimbatore Group : A - Industrial Spares Sub Group : A3 - Book Binding And Paper Making Industries Spares , Roller Ball Bearing 3 , Motor Rope , Grease , Nylon Mesh 40 , Bearing , V.Belt - B 94 , Packing Seal , Oil Seal , Gear Oil , V Belt B45 , Woolen Mat , Mould Mat , V Belt B119 , V Belt B118 , V Belt B 71 , Tyre Coupler , Central Prison, Coimbatore Group : B - Other Miscellaneous Articles , Char Coal , Jute Twine , Hessain Cloth , Polythene Paper , Packing Rope Of Cotton , Disposable Shaving Razors (For Issue To The Male Prisoners) , Central Prison, Coimbatore Group : C - Textile & Weaving Industry , 2/30S Warp And Weft Yarn [Polyester/Cotton] In Cones , 2/30S Warp And Weft Yarn [Polyester/Viscose]In Cones , 18Scotton Yarn Warp Yarn In Cones , 26S Weft / Warp Cotton Yarn In Cones , 10 S Weft / Warp Cotton Yarn In Cones , 2/18S Warp Cotton Yarn In Cones , 10 S Weft Cotton Yarn In Cones In Different Colours (Red, Green, Violet And Yellow) , Firewood , Ground Nut Shell , Central Prison, Coimbatore Group : D - Book Binding& Hand Made Paper Industry , Carboard - 2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Card Board - 2 Lbs , Central Prison, Coimbatore Group : E - Tailoring Industry , 60 S Over Lock Polyster Cotton Thread , 40 S Over Lock Polyster Cotton Thread , Pencil , 40S Polyster White Thread 1000 Mtrs , 80S Polyster White Thread 1000 Mtrs , White Colourcoat Button ( As In Praga Brandor Equivalent) , Khaki Colourcoat Button ( As In Praga Brandor Equivalent) , Rain Coat Cloth (Khaki Colour) , Rain Coat Cloth (White Colour) , Thread Graphic 4 Ply( As In Madura Coats Or Equivalent ) , Plastic Buckles Khaki , Plastic Buckles White , White Nylon Button , Reflective Tape White/Orange Colour , Candle , Flourescent Screen Printing As Policein Orange Colour , Velcro 1 (White & Black Colour) , Central Prison, Coimbatore Group : F - Carpentry Unit , Nylon Wire , Fevicol , Polish , Sand Paper , Brush , Nails , Thinner , Turpentine Oil , Central Prison, Coimbatore Group : V - Mosquito Net , Mosquito Net Cloth 135 Cm Width , 80S Polyster Cottonthread Khaki , Central Prison, Coimbatore Group : W - Dyeing Industry (Only Those Who Are In Theprocessing Field And Having Central Excisel4 License Are Eligble For Quoting Rates For Dyeing Clothes) , Dyeing Charges For Grey T.C. Cloth Into Khaki - Single Width , Dyeing Charges For Grey T.C.Cloth Into White - Single Width , Dyeing Charges Forgrey T.C.Cloth Into Khaki - Double Width , Dyeing Charges For Grey T.C. Cloth Into White - Double Width , Dyeing Charges Forgrey Poly Viscose Cloth Into Khaki- Single Width , Dyeing Charges For Grey Poly Viscose Cloth Into White - Single Width , Dyeing Charges For Grey Poly Viscose Cloth Into Khaki - Double Width , Dyeing Charges For Grey Poly Viscose Cloth Into White - Double Width , Dyeing Charges 114Cm Turban Cloth Into Blue Colour , Dyeing Charges 114Cm Turban Cloth Into Naptal Meroon Colour , Dyeing Charges For Single Width Grey T.C. Cloth Into Red Color , Central Prison, Madurai Group : B - Other Miscellaneous Articles , Char Coal , Jute Twine , Hessain Cloth , Soda Ash , Disposable Shaving Razor (For Issue To The Male Prisoners) , Central Prison, Madurai Group : C -Weaving Industry , 2/17Syarn [Cotton] In Cone - Bleached , 20Syarn [Cotton] In Cone - Bleached , Central Prison, Madurai Group : D - Book Binding Industry , Carboard - 2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Card Board - 2 Lbs , Firewood , Saw Dust , Central Prison, Palayamkottai Group : B- Other Miscellaneous Articles , Jute Twine , Hessian Cloth , Disposable Shaving Razor (For Issue To The Male Prisoners) , Central Prison, Palayamkottai Group - C : Weaving Industry , 2/17S Yarn [Cotton] In Cone - Bleached , 20Syarn [Cotton] In Cone - Bleached , Central Prison, Palayamkottai Group : D - Book Binding Industry , Carboard - 2½ Lbs , Varnished Marble Paper , Khaki Craft Paper , Tapioca Flour , Copper Sulphate , Calico , White Paper , ½ White Tape , Sand Paper , 10S Thread , Glue (Vajjiram) , Firewood
Contract Date: Jul 15, 2024 Contract Value : 28.43 Crore
Government Departments No of Bidders 25
Contract Date: Aug 30, 2023 Contract Value : 14.75 Lakh
Private Organizations No of Bidders 5
Uttarakhand View Result →
28.
Public Administrative Department #3314223 AOC
Etender Sale Auction Of Unused Store Items Etender Sale Auction Of Unused Store Items , M.S. Scrap , Old Bearing Scrap , Nickel Screen Scrap , Brass Screen , Brass Tubes , Ss Tubes Old Different Size , Contactor, Relay Chock, Switch Scrap , Old Battery ( Different Size ) , Aluminum Scrap , Old S.S. Screen , M.S., C.I. Chips, Tin Scrap , Gi, Ms Tin Tapan Scrap , Steel Wire Rope , Ci Scrap , Pit Machine , Cane Planter , Levelar ( Goddi ) , Tiller , Mhat Machine , Power Spray Pump , Kassi , Empty M.S. Drum 200 Ltr. , Empty M.S. Can 20 Ltr. , Empty Plastic Can 35 Ltrs. , Empty Plastic Can 50 Ltr. ( Green ) , Empty Plastic Can 50 Ltr. ( Black ) , Empty Plastic Can 50 Ltr. ( Blue ) , Empty Plastic Can 50 Ltr. ( White ) , Empty Plastic Can 05Ltr. , Rubber Tyre Different Size Truck , R.O. Different Size , R.O. Pump Different Size , Room Heater , Air Cooler Body Plastic / Iron , Land Line Phone , Wall Fan Plastic Body , Weighing Scale 30 Kg. , Fly Catches , Hand Torch , Chemical Plastic Pump , Oxygen / Lpg Regulator , Load Cell , Hammering Machine , Oven , Welding Set , Cutting Torch , Stabilizer Different Size , Old A.C. Split , Frp Pipe, Valve, Flange , Table , Chair Plastic , Chair Steel , Computer Set , Printer , Ups , Dry Cooler , Ceiling Fan , Wall Fan , Almeria , Stabilizer , Fax Machine , Briefcase , Inverter , Hand Battery Chargeable , Mattress , Refrigerator With Stabilizer , Trunck Iron , Sign Board , Folding Bed , Anteena , Hot Air Blower , Water Cooler , Reverse Osmosis , Laptop , Hot Case , Incumbency Board
Contract Date: Dec 30, 2021 Contract Value : 1
Cooperative No of Bidders 6
29.
Public Administrative Department #3272911 AOC
tender for Providing And Suplying Material In Auditorum Building At Ward No.31 xcavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 217.35 M 3 2,173.50 2 21.37 Bd.A.11 Page No. 263 1.00 M 3 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 1025.87 M 3 1,025.87 3 C1-3 10.00 M 3 Removing and transporting the excavated materials within PCMC limit including stacking, loading, unloading etc.complete as directed by engineer in charge. (Transportation Lead 3.0km) 219.98 M 3 2,199.80 4 21.38 Bd.A. 12 Page No. 264 1.50 M 3 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 1957.81 M 3 2,936.72 5 23.01 Bd.C.2 Page No. 275 0.40 MT Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. 106936.20 MT 42,774.48 6 11.04 CD.3 Page.No. 160 2.00 M 3 Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer without SCADA with fine agreegates of required specifications ( VSI sand finely washed etc ) 5810.71 M 3 11,621.42 7 11.04 CD.3 Page.No. 160 1.00 M 3 Providing and laying in situ cement concrete of 1:2:4 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer without SCADA with fine agreegates of required specifications ( VSI sand finely washed etc ) . 6672.08 M 3 6,672.08 8 25.11 Bd.F.3 Page No. 298 and B.7, Page No.38 0.50 M 3 Providing and laying in situ /Ready Mix cement concrete M20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc) 7124.87 M 3 3,562.44 9 27.01 Bd.G. 1 Page No. 313 0.10 M 3 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 8253.20 M 3 825.32 10 27.05 Bd.G.5 Page No. 315 0.50 M 3 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 8504.15 M 3 4,252.08 PIMPRI CHINCHWAD MUNICIPAL CORPORATION, PIMPRI -18 MEMORANDAM SHOWING THE ITEMS OF WORKS TO BE CARRIED OUT SCHEDUEL - B Name of Work :-Providing & suplying material in auditorum building at ward no.31 11 31.04 As directed by Engineer in charge. 50.00 M 2 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. 1219.65 M 2 60,982.50 12 31.09 As directed by Engineer in charge 10.00 M 2 Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. 645.75 M 2 6,457.50 13 32.07+32. 15 Bd.L.4 Page No. 368 2.00 M 2 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. . 489.53 M 2 979.06 14 32.07+32. 21 Bd.L.4 Page No. 368 2.00 M 2 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 with Cement finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. . 496.88 M 2 993.76 15 32.11 Bd.L.7 Page No. 369 5.00 M 2 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. . 682.34 M 2 3,411.70 16 32.24 As directed by Engineer in charge. 1.00 Rmt Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. 71.04 Rmt 71.04 17 33.24 Bd.M.12 Page No. 385. 10.00 M 2 Providing and laying ceramic tiles of having size 30cm x 30cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 1246.97 M 2 12,469.70 18 33.25 Bd.M.13 Page No. 386. 5.00 M 2 Providing and laying ceramic tiles of having size 30cm x 30cm and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. . 1323.62 M 2 6,618.10 19 33.40 Bd.M. 12 Page No.385 10.00 M 2 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622- 2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring 1242.75 M 2 12,427.50 20 33.41 Bd.M. 12 Page No.385 5.00 M 2 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting 1321.50 M 2 6,607.50 21 33.48 Bd. M. 12 10.00 M 2 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. 2497.43 M 2 24,974.30 22 33.66 Bd. M-12 page No. 385 5.00 M 2 Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 778.65 M 2 3,893.25 23 33.67 Bd. M-12 page No. 385 0.50 M 2 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622- 2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete . 1266.90 M 2 633.45 24 33.68 As directed by Engineer-InCharge 5.00 M 2 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. 4617.38 M 2 23,086.90 25 35.04 Bd.0.3 Page No. 404 300.00 M 2 Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat). 93.45 M 2 28,035.00 26 35.11 As directed by Engineer- incharge. 300.00 M 2 Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat) 92.40 M 2 27,720.00 27 35.25 Spec.No.: Bd.O.8/Page No.406 500.00 M 2 Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 274.05 M 2 137,025.00 28 36.11 Bd.P.5 Page No. 413 150.00 M 2 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. . 50.40 M 2 7,560.00 29 38.04 Bd.R.5, Page No. 453 2.00 M 2 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). 913.50 M 2 1,827.00 30 38.05 3.00 Providing and fixing plain zinc sheeting of 0.80mm thick (22B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screw sand bolts,lead and bitumen washers etc. complete.(Weight of 6.8 kg/sq.m.). 1195.95 M 2 3,587.85 31 39.10 BD-T-36 Page No. 500 0.49 M 2 Providing and fixing solid core flush door shutter commercial in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete 3058.65 M 2 1,486.50 32 39.49 As directed by Engineer in charge. 2.00 Rmt Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer. 2114.70 Rmt 4,229.40 33 39.58 As directed by Engineer in charge. 0.50 M 2 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete 3437.70 M 2 1,732.60 34 41.40 Bd.V.8 Page No. 554 20.00 Nos Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. 704.55 Nos 14,091.00 35 41.52 Bd.V.14 Page No. 557 10.00 Nos Providing and fixing 15mm diameter concussion push button type brass/gun metal self-closing tap including necessary socket complete. 487.20 Nos 4,872.00 36 41.60 Bd.V.26 Page No. 564 10.00 Nos Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. 5030.85 Nos 50,308.50 37 41.63 Bd.V.30 Page No. 565 10.00 Nos Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. . 5882.40 Nos 58,824.00 38 42.12 Bd.V.43, Page No. 574 3.00 Nos Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. . 9805.76 Nos 29,417.28 39 42.13 Bd.V.43, Page No. 574 3.00 Nos Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. . 11605.78 Nos 34,817.34 40 42.20 As directed by Engineer in charge. 1.00 Nos Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. . 904.05 Nos 904.05 41 42.30 As directed by Engineer in charge. 2.00 Nos Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. . 4207.35 Nos 8,414.70 42 42.34 As directed by Engineer in charge. 3.00 Nos Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. . 11760.00 Nos 35,280.00 43 42.37 As directed by Engineer in charge. 3.00 Nos Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. 511.35 Nos 1,534.05 44 42.51 As directed by Engineer in charge. 5.00 Rmt Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete 637.35 Rmt 3,186.75 45 42.54 As directed by Engineer in charge. 1,000.00 Lit Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters . 11.55 Lit 11,550.00 46 42.55 BD.V 5 page 551 and as directed by Engineer in charge 5.00 Rmt Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. . 279.30 Rmt 1,396.50 47 42.68 As directed by Engineer in charge. 1.00 Nos Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 kg) 5923.05 Nos 5,923.05 48 42.70 As directed by Engineer in charge. 1.00 Nos Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (160 kg) 5602.80 Nos 5,602.80 49 3.01 18.00 cum Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material 2581.71 cum 46,470.78 50 2.29 (a) MORTH 408 5.00 cum Supplying hard murum/ kankar at the road site, including conveying and stacking complete. 787.52 cum 3,937.60 51 2.30 MORTH 408 5.00 cum Spreading hard murum for side width etc. complete 82.95 cum 414.75 52 P&M- A 13 2.00 Day Hire charges for JCB JS140(8 to10 MT) including operator, disel , oil & other necessary maintainance , labour etc. complete. 1251.75 Hrs 2,503.50 53 P&M- B 83 8.00 Hrs Dumpper 6 Cu.Mt Capacity with VTS (vehicle tracking system) 818.25 Hrs 6,546.00 54 P&M- A 14 2.00 Day Hire charges for Excavator (JCB JS140 / Tata Hitachi EX120) 0.6 Cum Capacity including operator, disel, oil & other necessary maintainance, labour, etc. complete. (JCB 8 to 10 mt.) 10014.00 Day 20,028.00 55 36.00 5.00 Day Supplying mazdoor / Unskilled heavy male labour etc. 615.00 Day 3,075.00 TOTAL OF PART A:- 803,950.96 PART - B : Total Cost of work without GST, including R.A., MJP DSR & Garden DSR only (i.e. other than SSR 2020-21 & Royalty ) 56 The charges for providing and erecting cotton gate (sadi kaman) including all material transportation and labour etc. complete (rate/no) - 5.00 No a) For one day 1271.19 No 6,355.95 57 Hire charges for supplying cushion chair in good condition including polishing etc. complete (rate/no) - 50.00 No a) For one day 42.37 No 2,118.50 58 Hire charge s for supplying wooden table of 6 x 2 long in goood condition and covered with cotton white cover including all material transportation and labour etc. complete (rate/no) - 50.00 No a) For one day 33.90 No 1,695.00 59 Hire charges for supplying Fiber moulding chairs in good condition etc. complete (Rate/No) - 50.00 No a) For Fifteen day 47.08 No 2,354.00 60 Hire charges for supplying drinking water set for period as directed by engineer in charge including two stain less steel drum 50 glasses and two jugs. etc. complete (rate/job) - 10.00 Job a) For one day 338.98 Job 3,389.80 61 RA Approved Rate Analysis 10.00 M 2 Removing & Refixing of interlocking concrete paver blocks of all thickness of plain finish / colour or any size and shape, fixing of 50mm stone grit bedding laid in proper position. Levelling, filling, joints with stone dust, compacting by compactor as per IRC 063, cleaning including loading, unloading, transporating etc. complete as directed by Enginer in charge. (Approved RA). . 247.00 M 2 2,470.00 62 MJP 2021- 22 CD.7 Page.No. 162 20.00 Rmt Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 300mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. . 724.20 Rmt 14,484.00 63 MJP 2021- 23 CD.7 Page.No. 162 5.00 Rmt Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 300mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. . 915.20 Rmt 4,576.00 64 RA Approved Rate Analysis Providing and constructing on sewer BBM circular manhole chamber in cm 1:4 with concentric cone 1.20 m Dia.at bollom & 0.50m dia at top upto a depth of 2.0 m 1.5m Dia.at bottom & 0.5m dia at top upto depth of 9.00 m, with 23 cm thick brick work upto depth of 2.0 m from top of chamber and 35 cm tk brick work form depth up to 5.0m depth chamber & for depth upto 9.00 m. 23 cm thk brick work upto depth of 2.0 m from top chamber 35 cm thk brick work for next depth of 2.0 m depth & 45 cm thk brick for remaining depth upto 9 m depth of chamber plastering cm 1.2 proportin including additional excavation in additions to pipe trenches foundation concrete 250 mm thk. & hounches and channnal in cement concrete 1:2:4. proportion finishing and fixing c.i. dapuri type steps each weighing 5.5 kg cement concrete 1:2:4 coping & Providing and fixing approved making and quality S.F.R.C. (Steel fibre reinforced concrete) covers and frame of 560mm dia (20 tonnes capacity ) etc. complete as directed by engineer -incharge - 3.00 Nos a)up to depth 1.00 M. 20172.00 Nos 60,516.00 NOTE -Rebate Rs.3556- for depth up to 2m and Rs. 7691.00/- for depth above 2 m to 5.0m respectively for 0.50 mt each depth of chamber. 65 RA Approved Rate Analysis Repairing of old Circular Manhole chambers including providing and costructing BB masonry in CM 1:6, 20 mm plastering in CM 1:4 and coping in 1:2:4 includig excavation, fixing in position SFRC circular manhole frame nad cover of dia. 560 mm etc ( Depth upto 0.50 mts) 4.00 Nos a) Without Frame and Cover ( Deduct Rs. 867.00 for depth of 0.10 m) 3887.50 Nos 15,550.00 1.00 Nos b) Complete fixing frame and cover 7426.00 Nos 7,426.00 66 RA 2.00 sqm Painting waterproof wall sign boards with writing slogans and pictures for environment awareness in PCMC area with approved water proof , good quality material (Apex paint ) and labour as per direction of Engineer in charge .( with 5 years guarantee) Excluding GST 663.04 sqm 1,326.08 67 RA 2.00 Providing and Fixing Precast tapering R.C.C. M-40 grade Kerbs Type-VI - B With weepoles of PVC pice 50mm Dia (as per deatiled drawing attatched), in R-40 IRC specification (1000x250x150X350 ) embeded 200 mm below Ground neately with fixing in Position Cement Mortor 1:2 etc complete, including redoing the surface as specified and directed by Engineer-In-Charge.including transportation, Loading, unloading and including all other taxes and excluding GST. 821.72 Rmt 1,643.44 68 RA 5.00 Designing executing artistic painting for bridge landings, pillars, piers, walls and water tanks. To design and execut artistic painting on different concepts like on social subject . Promoting environment awareness and abstract paintings. Agency has to find appropriate location for the paintings. The design concept and location has to be approved from engineer in charge. Branded high quality weatherproof acrylic exterior wall paints should be used. First step is to scrap the walls then apply two coats primer paints and then multi coloring with approved shades as mentioned above. Painting will be done by the skilled artists . Matt finished coat of Polyurethane ( PU) should be applied for protecting weathering effect on wall. Rate should be inclusive of designing, executing. Scaffolding. Material and labor etc complete as per the direction given by engineer in charge and excluding gst 1800.00 sqm 9,000.00 - 69 RA Providing and fixing rectangular chamber of fallowing size in B.B. masonary C.M.1:4 with cement plaster(1:3)20mm thick on both sides,c.c.M-15(1:2:4)for frame &cover fixing 10 cm thick including additional excavation required with providing and fixing approved make and quality SFRC(20 tonne capacity)frame &cover as directed by engineer in charge. - MJP SSR 2021-22 1.00 Nos a)900*450*1200mm ( HD) (Add Rs 1629.00 for every increase in depth of 30cm or part there of 900x450x1200 rec. cham) 13279.00 Nos 13,279.00 MJP SSR 2021-22 1.00 Nos b) 600*450*900 mm ( HD) (Add Rs 1444.00 for every increase in depth of 30cm or part there of 600x450x900 rec. cham) 9245.00 Nos 9,245.00 70 RA Approved R.A. 1.00 Nos Providing and Fixing Sagar black sandstone bench of Type D73, [(01 Top Slgb - (35 x 14 x 3) and 02 Supports - (6 x 1 x 110)l with top surface polished and remaining surfaoes natural finish, fixed with cladex chemical as per Detailed Drawing Attached and Type suggested by Architect and as directed by Engineer In charge including transportation, loading, unloading and all other taxes and excluding GST 16000.00 Nos 16,000.00 TOTAL OF PART B:- 171,428.77 Section-I TOTAL OF PART A and B :- 975,379.73 PART - C : Total Cost of Material Testing Items BASIC TEST OF CEMENT 71 1 - 1.00 1 Test Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness 3770.00 1 Test 3,770.00 BASIC TEST OF AGGREGATE 72 2 - 1.00 1 Test A)Water Absorption, Specific Gravity ,lmpact Value /Crushing Value. 2600.00 1 Test 2,300.00 3 1.00 1 Test B)Sieve Analysis 690.00 1 Test 690.00 73 4 1.00 1 Test C)Abrasion value 1170.00 1 Test 1,170.00 5 1.00 1 Test D)Flakiness index nad Elongation Index 850.00 1 Test 850.00 74 6 1.00 1 Test E)Soundness 2495.00 1 Test 2,495.00 BASIC TEST OF FINE AGGREGATE 75 11 - 1.00 1 Test Finenees module( seive analysis), silt and clay content, 1380.00 1 Test 2,300.00 BRICKS 76 14 - 1.00 1 Test Water Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks) 2175.00 1 Test 2,175.00 CONCRETE PAVING BLOCKS 77 27 - 2.00 1 Test Compressive Strength, Water Absorption, (Set of 8 Blocks) 2495.00 1 Test 4,990.00 SOIL / MURUM 78 30 1.00 1 Test a)Sieve analysis 690.00 1 Test 690.00 STEEL BAR TESTING 79 83 - 2.00 1 Test Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)
Contract Date: Dec 27, 2023 Contract Value : 10.00 Lakh
Local Bodies No of Bidders 2
Maharashtra View Result →
33.
Rural Development #1386867 AOC
Material Supply For Mgnregs Works-Secure 0222 Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long 0223 Fibre ( High Impact Poly Propelene Reinforced ) Cement Corrugated Sheet 6 Mm Thick 0224 Fibre ( High Impact Poly Propelene Reinforced ) Cement Close Fitting Adjustable Ridge 0225 Fibre ( High Impact Poly Propelene Reinforced ) Cement Corrugate Serrated Adjustable Ridge 0226 Fibre ( High Impact Poly Propelene Reinforced ) Cement Plain Wing Adjustable Ridge 0227 Fibre ( High Impact Poly Propelene Reinforced ) Cement Unserrated Adjustable Ridge For Hips 0228 Fibre ( High Impact Poly Propelene Reinforced ) Cement Corrugated Apron Piece 0229 Fibre ( High Impact Poly Propelene Reinforced ) Cement Eaves Filler Piece 0230 Fibre ( High Impact Poly Propelene Reinforced ) Cement North Light Curves 0231 Non-Asbestos Fibre ( High Impact Poly Propelene Reinforced ) Cement Ventilator Curves 0232 Fibre ( High Impact Poly Propelene Reinforced ) Cement Barge Boards 6 Mm Thick 0233 Fibre ( High Impact Poly Propelene Reinforced ) Cement Ridge Finial 0234 Fibre ( High Impact Poly Propelene Reinforced ) Cement Special North Light Curves 0235 Fibre ( High Impact Poly Propelene Reinforced ) Cement S Type Louvers 0236 Multi Purpose Fibre ( High Impact Poly Propelene Reinforced ) Cement Board 6 Mm Thick 0237 Multi Purpose Fibre ( High Impact Poly Propelene Reinforced ) Cement 8 Mm Thick 0238 6 Mm Thick Heavy Duty Fiber Cement Board 0239 8 Mm Thick Heavy Duty Fiber Cement Board 0240 9 Mm Thick Heavy Duty Fiber Cement Board 0241 12.5 Mm Thick Gypsum Plaster Board 0242 6 Mm Thick Multipurpose Cement Bonded Wood Particle Board Conforming To Is : 14276 0243 8 Mm Thick Multipurpose Cement Bonded Wood Particle Board Conforming To Is : 14276 0285 Brick Aggregate ( Single Size ) :63 Mm Nominal Size 0286 Brick Aggregate ( Single Size ) :50 Mm Nominal Size 0287 Brick Aggregate ( Single Size ) :40 Mm Nominal Size 0291 Stone Aggregate ( Single Size ) :63 Mm Nominal Size 0292 Stone Aggregate ( Single Size ) :50 Mm Nominal Size 0293 Stone Aggregate ( Single Size ) : 40 Mm Nominal Size 0294 Stone Aggregate ( Single Size ) :25 Mm Nominal Size 0295 Stone Aggregate ( Single Size ) :20 Mm Nominal Size 0296 Stone Aggregate ( Single Size ) : 12.5 Mm Nominal Size 0297 Stone Aggregate ( Single Size ) : 10 Mm Nominal Size 0298 Stone Aggregate ( Single Size ) : 06 Mm Nominal Size 0302 Safeda Ballies 125 Mm Diameter 0303 Cowdung 0304 Bajiri 0305 Bamboo 25 Mm Dia 2.5 Meter Long 0308 Bhusa 0309 Paving Bitumen Of Grade Vg 10 Of Approved Quality 0310 Bitumen Emulsion 0312 Bitumen Grade Pmb - 40 0313 Blown Type Petroleum Bitumen Of Penetration 85 / 25 Of Approved Quality 0314 Bitumen Hot Sealing Compound : Grade A Secure 0316 Bitumen Solution Primer Of Approved Quality 0317 Premoulded Joing Filler 12 Mm Thick 0318 Bitumen Felt Fibre Base ( Vegetable Or Animal ) : Type 2 Grade 1 0319 Bitumen Felt As Per Is 7193 Grade Ii 0322 Bitumen Felt : Type 3 Grade 1 0323 Separation Membrane Of Impermeable Plastic Sheeting 125 Micron Thick 0324 Coal Tar 0325 Blasting Powder 0326 Blasting Fuse ( Fuse Wire ) 0328 White Face Insulating Board : 12 Mm Thick 0332 Natural Colour Insulating Board : 12 Mm Thick 0336 Flame Retardant Face Insulating Board : 12 Mm Thick 0339 Flame Retardant Face Inslulating, Impregnated Fibre Board 12 Mm Thick 0341 Flat Pressed 3 Layer Particle Board ( Medium Density ) Grade 1, 12 Mm Thick 0346 Extra For Veneered Particle Board With : Teak Veneering On One Side And Commercial Veneering On Other Side 0347 Extra For Veneered Particle Board With Commercial Veneering On Both Sides 0348 Extra For Veneered Particle Board With Teak Veneering Both Sides 0349 Curing Compound 0351 Integral Cystalline Slurry 0352 Integral Crystalline Admixture 0353 Crystalline Mortar 0354 Integral Cystalline Dry Shake 0355 Swellable Type Water Stop Tape 0356 Primer For Swellable Type Wate Stop Tape 0357 Polymer Modified Adhesive Mortar 0362 Brick Bats 0364 Wire Brush 0365 Soft Brush 0367 Portland Cement 0368 White Cement 0369 Plastic Sheath, 1.25 Mm Thick For Dowel Bars 0370 Coal ( Steam ) 0371 Sealant Primer 0373 Cramp Gun Metal 25X6x300 Mm 0374 Pre Moulded Joint Filler, 25Mm Thick For Expansion Joint 0378 Brass Butt Hinges ( Light / Ordinary Type ) :125X70x4 Mm 0379 Brass Butt Hinges ( Light / Ordinary Type ) : 100X70x4 Mm 0380 Brass Butt Hinges ( Light / Ordinary Type ) : 75X40x2.5 Mm 0381 Brass Butt Hinges ( Light / Ordinary Type ) : 50X40x2.5 Mm 0382 Brass Butt Hinges ( Heavy Type ) :125X85x5.5 Mm ( 0.70 Kg ) 0383 Brass Butt Hinges ( Heavy Type ) : 100X85x5.5 Mm ( 0.56Kg ) 0384 Brass Butt Hinges ( Heavy Type ) : 75X65x4.0 Mm ( 0.20 Kg ) 0385 Brass Parliamentary Hinges 150X125x27x5 Mm 0386 Brass Parliamentary Hinges 125X125x27x5 Mm 0387 Brass Parliamentary Hinges 100X125x27x5 Mm 0388 Brass Parliamentary Hinges 75X100x20x3.2 Mm 0389 Brass Single Acting Spring Hinges 150 Mm 0390 Brass Single Acting Spring Hinges 125 Mm 0391 Brass Single Acting Spring Hinges 100 Mm 0392 Brass Double Acting Spring Hinges 150 Mm 0393 Brass Double Acting Spring Hinges 125 Mm 0394 Brass Double Acting Spring Hinges 100 Mm 0400 Brass Tower Bolt ( Barrel Type ) 250X10 Mm 0401 Brass Tower Bolt ( Barrel Type ) 200X10 Mm 0402 Brass Tower Bolt ( Barrel Type ) 150 X 10 Mm 0403 Brass Tower Bolt ( Barrel Type ) 100 X 10 Mm Secure 0404 Brass Flush Bolt 250 Mm 0405 Brass Flush Bolt 150 Mm 0406 Brass Flush Bolt 100 Mm 0408 Brass Handles 125 Mm With Plate 175X32 Mm 0409 Brass Handles 100 Mm With Plate 150X32 Mm Mm 0410 Brass Handles 75 Mm With Plate 125X32 Mm 0411 Brass Door Latch 300X16x5x Mm ( 0.380 Kg ) 0412 Brass Door Latch 250X16x5 Mm ( 0.350 Kg ) 0413 Brass Mortice Latch And Lock 100 X 65 Mm With6 Levers And A Pair Of Brass Lever Handles 0414 Brass Mortice Latch 100X65 Mm With A Pair Of Brass Lever Handles 0417 Brass 150 Mm Floor Door Stopper ( 0.357 Kg ) 0418 Brass Hard Drawn Hooks And Eyes 300 Mm 0419 Brass Hard Drawn Hooks And Eyes 250 Mm 0420 Brass Hard Drawn Hooks And Eyes 200 Mm 0421 Brass Hard Drawn Hooks And Eyes 150 Mm 0422 Brass Hard Drawn Hooks And Eyes 100 Mm 0423 Brass Casement Window Fastener 0424 Brass Casement Stays ( Straight Peg Type ) 300 Mm Weighing Not Less Than 0.33 Kg 0425 Brass Casement Stays ( Straight Peg Type ) 250 Mm Weighing Not Less Than 0.28 Kg 0426 Brass Casement Stays ( Straight Peg Type ) 200 Mm Weighing Not Less Than 0.24 Kg 0427 Brass Quadrant Stays 300 Mm 0428 Brass Fanlight Catch 0429 Brass Fanlight Pivot 0430 Brass Chain With Hook For Fan Light Catch 0431 Brass Hasps And Staples ( Safety Type ) 150 Mm 0432 Brass Hasps And Staples ( Safety Type ) 115 Mm 0433 Brass Hasps And Staples ( Safety Type ) 90 Mm 0438 Brass Night Latch 0442 Brass Helical Spring 150 Mm 0444 Brass Curtain Rod 20 Mm Dia 1.25 Mm Thick 0445 Brass Curtain Rod 25 Mm Dia 1.25 Mm Thick 0446 Brass Brackets ( Curtain Rods ) 20 Mm 0447 Brass Cupboard Knob Or Wardrobe Knob 50 Mm 0449 Brass Screws 50 Mm 0450 Brass Screws 40 Mm 0451 Brass Screws 30 Mm 0452 Brass Screws 25 Mm 0453 Brass Screws 20 Mm 0524 Chromium Plated Brass Butt Hinges ( Heavy ) Type 75X65x4 Mm ( 200 Gms ) 0525 Chromium Plated Brass Butt Hinges ( Light / Ordinary ) Type 125X70x4 Mm 0526 Chromium Plated Brass Butt Hinges ( Light / Ordinary ) Type 100X70x4 Mm 0527 Chromium Plated Brass Butt Hinges ( Light / Ordinary ) Type 75X40x2.5 Mm 0528 Chromium Plated Brass Butt Hinges ( Light / Ordinary ) Type 50X40x2.5 Mm 0552 75 Mm Ss Fancy Handles For Kitchen Cabinet 0553 100 Mm Ss Fancy Handles For Kitchen Cabinet 0554 125 Mm Ss Fancy Handles For Kitchen Cabinet 0555 Chromium Plated Brass Handles 125 Mm With Plate 175X32 Mm 0556 Chromium Plated Brass Handles 100 Mm With Plate 150X32 Mm 0557 Chromium Plated Brass Handles 75 Mm With Plate 125X32 Mm 0558 Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles 0568 Chromium Plated Brass Casement Window Fastener 0569 Chromium Plated Brass Casement Stays ( Straight Peg Type ) 300 Mm Weighing Not Less Than 0.33 Kg 0570 Chromium Plated Brass Casement Stays ( Straight Peg Type ) 250 Mm Weighing Not Less Than 0.28 Secure 0571 Chromium Plated Brass Casement Stays ( Straight Peg Type ) 200 Mm Weighing Not Less Than 0.24 Kg 0583 Chromium Plated Brass Night Latch 0584 Chromium Plated Brass Wardrobe Knob 50 Mm 0585 Chromium Plated Brass Screws 50 Mm 0586 Chromium Plated Brass Screw 40 Mm 0587 Chromium Plated Brass Screws 30 Mm 0588 Chromium Plated Brass Screws 25 Mm 0589 Chromium Plated Brass Screws 20 Mm 0590 Chromium Plated Brass Curtain Rod 12 Mm Dia 1.25 Mm Thick 0591 Chromium Plated Brass Curtain Rod 20 Mm Dia 1.25 Mm Thick 0592 Chromium Plated Brass Curtain Rod 25 Mm Dia 1.25 Mm Thick 0593 C. P. Brass Extension Nipple ( 1 / 2X2 Size ) 0594 Bright Finished Or Black Enameled Mild Steel Butt Hinges 125X65x2.12 Mm 0595 Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x1.90 Mm 0596 Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x1.70 Mm 0597 Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x1.50 Mm 0608 Nickel Plated Bright Finished Mild Steel Piano Hinges 1 Mm Thick 25 Mm Wide 0635 Bright Finished Or Black Enameled Mild Steel Screws 50 Mm 0637 Bright Finished Or Black Enameled Mild Steel Screws 40 Mm 0638 Bright Finished Or Black Enameled Mild Steel Screws 30 Mm 0639 Bright Finished Or Black Enameled Mild Steel Screws 25 Mm 0640 Bright Finished Or Black Enameled Mild Steel Screws 20 Mm 0641 Bright Finished Or Black Enameled Mild Steel Bolts And Nuts 50X6 Mm 0642 Oxidised Mild Steel Butt Hinges 125X65x2.12 Mm 0643 Oxidised Mild Steel Butt Hinges 100X58x1.90 Mm 0644 Oxidised Mild Steel Butt Hinges 75X47x1.70 Mm 0645 Oxidised Mild Steel Butt Hinges 50X37x1.50 Mm 0646 Oxidised Mild Steel Parliamentary Hinges 150X125x27x2.8 Mm 0647 Oxidised Mild Steel Parliamentary Hinges 125X125x27x2.8 Mm 0648 Oxidised Mild Steel Parliamentary Hinges 100X125x27x2.8 Mm 0649 Oxidised Mild Steel Parliamentary Hinges 75X100x20x2.24 Mm 0650 Oxidised Mild Steel Single Acting Spring Hinges 150 Mm 0651 Oxidised Mild Steel Single Acting Spring Hinges 125 Mm 0652 Oxidised Mild Steel Single Acting Spring Hinges 100 Mm 0653 Oxidised Mild Steel Single Acting Spring Hinges 150 Mm 0654 Oxidised Mild Steel Double Acting Spring Hinges 125 Mm 0655 Oxidised Mild Steel Double Acting Spring Hinges 100 Mm 0656 Nickel Plated Mild Steel Piano Hinges 1 Mm Thick 35 Mm Wide 0660 Oxidised Mild Steel Sliding Door Bolt 300X16 Mm 0661 Oxidised Mild Steel Sliding Door Bolt 250X16 Mm 0662 Oxidised Mild Steel Door Latch 300X20x6 Mm 0663 Oxidised Mild Steel Door Latch 250X20x6 Mm 0664 Oxidised Mild Steel Tower Bolt ( Barrel Type ) 250X10mm 0665 Oxidised Mild Steel Tower Bolt ( Barrel Type ) 200X10 Mm 0666 Oxidised Mild Steel Tower Bolt ( Barrel Type ) 150X10 Mm 0667 Oxidised Mild Steel Tower Bolt ( Barrel Type ) 100X10 Mm 0668 Oxidised Mild Steel Handles 125 Mm 0669 Oxidised Mild Steel Handles 100 Mm 0670 Oxidised Mild Steel Handles 75 Mm 0679 Oxidised Mild Steel Hasps And Staples ( Safety Type ) 150 Mm 0680 Oxidised Mild Steel Hasps And Staples ( Safety Type ) 115 Mm 0681 Oxidised Mild Steel Hasps And Staples ( Safety Type ) 90 Mm 0682 Oxidised Mild Steel Screws 50 Mm 0683 Oxidised Mild Steel Screws 40 Mm 0684 Oxidised Mild Steel Screws 30 Mm Secure 0685 Oxidised Mild Steel Screws 25 Mm 0686 Oxidised Mild Steel Screws 20 Mm 0687 Anodised Aluminium Butt Hinges 125X75x4 Mm 0688 Anodised Aluminium Butt Hinges 125X63x4xmm 0689 Anodised Aluminium Butt Hinges 100X75x4 Mm 0690 Anodised Aluminium Butt Hinges 100X63x3.2 Mm 0691 Anodised Aluminium Butt Hinges 100X63x4 Mm 0692 Anodised Aluminium Butt Hinges 75X63x4 Mm 0693 Anodised Aluminium Butt Hinges 75X63x3.2 Mm 0694 Anodised Aluminium Butt Hinges 75X45x3.2 Mm 0696 Anodised Aluminium Sliding Door Bolt 300X16 Mm 0697 Anodised Aluminium Sliding Door Bolt 300X16 Mm 0698 Anodised Aluminium Tower Bolt ( Barrel Type ) 300X10 Mm 0699 Anodised Aluminium Tower Bolt ( Barrel Type ) 250 X 10 Mm 0700 Anodised Aluminium Tower Bolt ( Barrel Type ) 200X10 Mm 0701 Anodised Aluminium Tower Bolt ( Barrel Type ) 150X10 Mm 0702 Anodised Aluminium Tower Bolt ( Barrel Type ) 100X10 Mm 0703 Anodised Aluminium Handles 125 Mm With Plate 175 X 32 Mm 0704 Anodised Aluminium Handles 100 Mm With Plate 150 X 32 Mm 0705 Anodised Aluminium Handles 75 Mm With Plate 125 X 32 Mm 0706 Anodised Aluminium Kicking Plate 50 Cm Long 100X3.15 Mm 0713 Block Board Construction Flush Door With Teak Wood Ply On Both Faces 35 Mm Thick 0714 Block Board Construction Flush Door With Teak Wood Play On Both Faces 30 Mm Thick 0715 Block Board Construction Flush Door With Teak Wood Ply On Both Faces 25 Mm Thick 0717 Block Board Construction Flush Door With Commercial Ply On Both Faces 0718 Block Board Construction Flush Door With Commercial Ply On Both Faces 30 Mm Thick 0719 Block Board Construction Flush Door With Commerciial Ply On Both Faces 25 Mm Thick 0752 Block Board Construction Flush Door Lipping 0753 Square Vision Panel ( Upto 0.10Sqm ) In Block Board Construction Flush Door 0754 Circular Vision Panel ( Upto 0.10 Sqm ) In Block Board Construction Flush Door 0755 Decorative Type Louvers ( Upto 0.20 Sqm ) In Block Board Construction Flush Door 0757 Rebate Cutting In Block Board Construction Flush Door 0759 Decorative Plywood 4 Mm 0761 Fuel Wood 0763 Glue 0764 Calcium Silicate Base Compound For Jointing Calcium Silicate Tiles 0765 Hessian Cloth 0768 Cement Concrete Jali 50 Mm Thick 0769 Cement Concrete Jali 40 Mm Thick 0770 Cement Concrete Jali 25 Mm Thick 0771 Kerosene Oil 0772 White Cement Based Polymer Modified Self Curing Compound In Powder Form 0773 Unslaked Lime 0775 Deharadun White Lime 0776 Satna Lime 0777 Dry Hydrated Lime ( Factory Made ) 0784 Marble Dust / Powder 0785 Marble Chips Up To 4 Mm And Downsize White &Black 0788 Marble Chips Large Size Above 4 Mm White & Black 0801 Silicon And Acrylic Emulsion 0802 Acrylic Distemper Ist Quality, Having Voc Content Less Than 50 Gm / Litre 0803 Acrylic Emulsion, Having Voc Content Less Than 50 Gm / Litre Secure 0804 Premium Acrylic Emulsion Of Interior Grade, Having Voc Content Less Than 50 Gm / Litre 0805 Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm / Liitre 0806 Ready Mixed Pink Or Grey Primer On Wood Work ( Hard And Softwood ) Having Voc Content Less Than 50 Gms / Litre 0807 Ready Mixed Red Oxide Zinc Chromatic On Steel / Iron Work, Having Voc Content Less Than 250 Gms / Litre 0808 Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms / Litre 0809 Exterior Primer 0810 Moorum 0811 Mud ( Dry ) 0815 Dry Distemper 0816 Oil Bound Washable Distemper / Acrylic Distemper 0818 Linseed Oil ( Double Boiled ) 0820 Cement Primer 0821 Distemper Primer 0823 Pink Primer ( For Wood ) 0824 White Cement Based Putty 0826 Aluminium Paint 0827 Acid Proof Paint ( Chocolate Or Black ) 0828 Anticorrosive Bituminous Paint ( Black ) 0829 Black Japan 0830 Enamel Paint 0831 Floor Enamel Paint In All Shades Except Green 0833 Synthetic Enamel Paint In Black Or Chocolate Shade 0834 Synthetic Enamel Paint In All Shades Except Black Or Chocolate Shade 0835 Plastic Emulsion Paint 0845 Roofing Paint For Iron Sheets In Red Colour 0850 White Lead 0851 Water Proofing Cement Paint 0855 Wax Polish ( Ready Made ) 0856 Ordinary Varnish 0857 Superior Copal Varnish 0858 Superior Spar Varnish 0859 Oil Type Wood Preservative 0863 Putty For Wood Work 0865 Pig Lead 0868 Premixed Super White Gypsum Plaster 0869 Plaster Or Paris 0870 Plug 0873 Copper Pins 6 Mm Dia 7.5 Cm Long 0874 Black Colour Dark Shade Pigment 0875 Red Chocolate, Orange, Buff Or Yellow ( Red Oxide Of Iron ) Light Shade 0876 Green Or Blue Medium Shade Pigment 0886 Standard Holder Bat Clamps For Sand Cast Iron Or Cast Iron Pipes 150 Mm Dia 0966 Sand Cast Iron Plain Shoe 150 Mm Dia 0967 Copper Plate 0969 Pulley 25 Mm Dia 0973 Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths 0974 Top Cover For Rolling Shutters 1.25 Mm Thick 0975 27.5 Cm Long Wire Spring Grade No 2 For Rolling Shutters 0976 Ball Bearing For Rolling Shutters 0977 Extra For Mechanical Devices Chain And Cranked Operation For Operating Rolling Shutters: Exceeding 16.80 Sqm Area Of Door 0978 Extra For Mechanical Devices Chain And Cranked Operation For Operating Rolling Shutters: Exceeding 16.80 Sqm Area Of Door 0979 Royalty For Good Earth Secure 0980 Royalty For Sludge 0982 Coarse Sand ( Zone Iii ) 0983 Fine Sand ( Zone Iv ) 0992 Galvanised Steel Plain Sheets 0994 Standard Quality Hard Board Sheet 3 Mm Thick 0996 Standard Quality Hard Board Sheet 4.5 Mm Thick 0999 Shellac 1000 Spirit 10001 Neelgiri Grass Turf With Earth 50Mm To 60Mm Thicknes 10003 Rolling Or Ramming Of Ground Turf ( Grass 10004 Selection No.1 Grass Turf With Earth 50Mm To 60Mm Thickness 10005 Bermuda Grass Or Doob Grass 10006 Floral Foam Brick ( Premium Quality / High Density ) ( 1 Box Containing 20 Bricks 10007 River Pabbles Size Of 2 To 2.50 Dia In Natural Colour 10008 Selection No.1 Grass At Site Fresh & From Weeds 10009 Pvc Hexagonal Net ( Tuflex Or Equivalent 1001 Spun Yarn 10010 Bamboo 18 To 20Cm Grith And 90 Cm Height 10011 Providing Of Aglaonema Parrot Jungle Plant ( Three In One ) , Having Ht. Cm And Above With 20 To 25 Leaves, Well Developed, Fresh & Healthy In Cm Size Of Earthen Pot / Plastic Pot. 10012 Providing Of Aglaonema Dove Variety Plant, Having Ht. 30 Cm To 45 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. 10013 Providing Of Aglaonema Pseudo Bractatum Plants, Having Ht. 30 Cm And Above With 3 To 4 Suckers & 20 To 25 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. 10014 Providing Of Aglaonema Snow White Hybrid Plant ( Three In One ) , Having Ht. 30 Cm & Above With 6 To 8 Leaves, Bright Colour, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. ( Specimen Plant ) . 10015 Providing Of Aglaonema Silver Queen Plant, Having Ht. 30 Cm To 45 Cm. With 12 To 15 Leaves, Multi Suckers, Well Developed, Fresh And Healthy 25 Cm Size Of Earthen Pot / Plastic Pot. 10016 Providing Of Aglaonema Ernesto Plant ( Three In One ) , Having Ht. 45 Cm Above With 12 To 15 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. 10017 Providing Of Aglaonema Marentifolium Variety Plant, Having Ht. 23 Cm 30 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy With Colourfull Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot. 10018 Providing Of Aglaonema Modestum Plant, Having Ht. 23 Cm To 30 Cm With 3 To 4 Suckers & 15 To 20 Leaves, Well Developed, Fresh And Healthy In Cm Size Of Earthen Pot / Plastic Pot. 10019 Providing Of Aglaonema Nitida Plant, Having Ht. 30 Cm To 45 Cm With 8 10 Leaves, Well Developed, Fersh And Healthy With Attractive Leaves In Cm Size Of Earthen Pot / Plastic Pot. 1002 Mild Steel Round Bar 12 Mm Dia And Below 10020 Providing Of Araucaria Cookie Plant, Having Ht. 60 Cm To 75 Cm, Straight, Well Developed, Fresh And Healthy With Lush Green Leaves From Bottom Top In 20 Cm Size Of Earthen Pot / Plastic Pot. 10021 Providing Of Araucaria Cookie Plant, Having Ht. 75 Cm To 90 Cm, Straight, Well Developed, Fresh And Healthy With Lush Green Leaves From Bottom Top In 25 Cm Size Of Earthen Pot / Plastic Pot. 10022 Providing Of Araucaria Cookii Plant, Having Ht.1.20 M To 1.35 M, Straight, Well Developed, Fresh And Healthy With Lush Green Leaves From Bottom Top In 25 Cm Size Of Earthen Pot / Plastic Pot. 10023 Providing Of Araucaria Cookii Plant, Having Ht.1.80 M To 1.95 M, Straight, Well Developed, Fresh And Healthy With Lush Green Leaves From Bottom Top In 30 Cm Size Of Earthen Pot / Plastic Pot. 10024 Providing Of Areca Palm Plant, Having Ht. 90 Cm To 1.20 M With 4 To Suckers, Well Developed, Fresh And Healthy With Lush Green Foliage In 20 Cm Size Of Earthen Pot / Plastic Pot. 10025 Providing Of Areca Palm Plant, Having Ht. 1.20 M To 1.50 M With 5 To Suckers, Well Developed, Fresh And Healthy With Lush Green Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot 10026 Providing Of Areca Palm Plant, Having Ht. 1.50 M To 1.80 M With 6 To Suckers, Well Developed, Fresh And Healthy With Lush Green Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. Secure 10027 Providing Of Areca Palm Plant, Having Ht. 1.80 M To 2.10 M With 8 To 10 Suckers, Well Developed, Fresh And Healthy With Lush Green Foliage In 30 Cm Size Of Earthen Pot / Plastic Pot. 10028 Providing Of Areca Palm Plant, Having Ht. 2.40 M To 2.70 M With 12 To 14 Suckers, Well Developed, Fresh And Healthy With Lush Green Foliage In 35 Cm Size Of Bucket Type Cement Pots 10029 Providing Of Brassia Varigated Plant, Having Ht. 30 Cm, Well Developed With Fresh And Healthy Foliage In 20 Cm Size Of Earthen Pot / Plastic Pot 1003 Mild Steel Round Bar Above 12 Mm Dia 10030 Providing Of Brassia Varigated Plant, Having Ht. 30 Cm To 45 Cm, Well Developed With Fresh And Healthy Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10031 Providing Of Chamaedorea Elegans Palm Plant, Having Ht. 60 Cm To 75 Cm, Well Developed With Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot 10032 Providing Of Croton Challanger Variety Plant, Having Ht. 30Cm And Above, Well Developed With Full Of Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot 10033 Providing Of Croton Baby Golden Variety Plant, Having Ht.30 Cm And Above, Well Developed With Full Of Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot. 10034 Providing Of Croton Baby Golden Punctatumaureum Plant, Having Ht. 23 Cm To 30 Cm, Well Developed With Fresh And Healthy Foliage In 15 Cm Size Of Earthen Pot / Plastic Po 10035 Providing Of Croton Golden Plant, Having Ht. 45 Cm To 60 Cm With 2 To 3 Branches, Well Developed, Fresh And Healthy Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10036 Providing Of Croton Baby Golden Plant ( Three In One ) , Having Ht. 30Cm, Multi Brancheses, Well Developed With Fresh And Healthy Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10037 Providing Of Croton Golden ( Broad Leaves ) Plant, Having Ht. 60 Cm To 75 Cm With 3 To 4 Brancheses, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot 10038 Providing Of Croton Golden Specimen Plant, Having Ht. 90 Cm To 1.05 Cm With 5 To 6 Branches, Well Developed, Fresh And Healthy Foliage In 30 Cm Size Of Earthen Pot / Plastic Pot. 10039 Providing Of Croton Duck Foot ( Elite ) Plant, Having Ht. 45 Cm And Above With 3 To 4 Branches, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 1004 Average Rate Of Mild Steel Round Bars For Reinforcements 10040 Providing Of Croton Duck Foot ( Elite ) Plant, Having Ht. 60 Cm To 75 Cm With 4 To 5 Branches, Well Developed, Fresh And Healthy Colourfull Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10041 Providing Of Croton Petra Banglore Variety Plant, Having Ht 45 Cm & Above, Well Develooped With Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot. 10042 Providing Of Croton Petra Plant, Having Ht. 45 Cm & Above With 2 To 3 Branches, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10043 Providing Of Croton Petra Bangalore Variety Plant, Having Ht. 60 Cm To 75 Cm With 4 To 6 Branches, Well Developed, Fresh And Healthy Colourfull Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10044 Providing Of Speciman Croton Petra Banglore Variety Plant, Having Ht. 60 Cm To 75 Cm With 4 To 6 Branches, Well Developed, Fresh & Healthy Foliage Approximately 60-65 Leaves In 30 Cm Size Of Earthen Pot / Plastic Pot. 10045 Providing Of Diffenbachia Tropicsnow Plant, Having Ht. 60 Cm & Above With 8 - 10 Leaves, Well Developed, Fresh & Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot 10046 Providing Of Diffenbachia Mosaic Plant, Having Ht. 30Cm To 45 Cm With 1012 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. 10047 Providing Of Dieffenbachia ( Meaclata ) Plant, Having Ht. 45 Cm To 60 Cm With 5 And Above Leaves, Well Developed, Fresh And Healthy & Attractive Varigated Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10048 Providing Of Dracaena Song Of India Plant ( Three In One ) , Having Ht. 30 Cm And Above, Multibranched, Well Developed With Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10049 Providing Of Dracaena Song Of India Specimen Plant ( Three In One ) , Having Ht. 60 Cm & Above, Well Developed, Fresh And Healthy With Good Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 1005 Twisted Steel / Deformed Bars Secure 10050 Providing Of Draceana Song Of India Green Plant ( Three In One ) , Having Ht. 30 Cm, Well Developed, Fresh & Healthy, Lush Green Foliage From Bottom To Top In 20 Cm Size Of Earthen Pot / Plastic Pot. 10051 Providing Of Draceana Song Of India Green Plant ( Three In One ) , Having Ht. 30 Cm, Well Developed, Fresh & Healthy, Lush Green Foliage From Bottom To Top In 20 Cm Size Of Earthen Pot / Plastic Pot. 10052 Providing Of Dracaena Kedarnath Plant, Having Ht. 30 Cm & Above, Well Developed With Good Colourful Foliage In 20 Cm Size Of Earthen Pot / Plastic Pot 10053 Providing Of Dracaena Margineta Plant, Having Ht. 30 Cm To 45 Cm With Colourfull Leaves, Fresh And Healthy In 20 Cm Size Of Earthen Pot / Plastic Pot 10054 Providing Of Dracaena Mahatma Plant, Having Ht. 30 Cm To 45 Cm, Well Developed, Fresh And Healthy Foliage In 20 Cm Size Of Earthen Pot / Plastic Pot. 10055 Providing Of Dracaena Rosea Plant, Having Ht. 30 Cm & Above With 8 To10 Leaves, Well Developed, Fresh And Healthy In 20 Cm Size Of Earthen Pot / Plastic Pot. 10056 Providing Of Dracaena Victoria Plant, Having Ht. 30 Cm & Above, Well Developed With Full Of Leaves, Fresh And Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. 10057 Providing Of Dracaena Fragrans”Massangeana’’ Plant, Having Ht. 30 Cm & Above With Full Of Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. 10058 Providing Of Draceana Waranickii Plant, Having Ht. 30 Cm To 45 Cm. With Good Colour Foliage, Well Developed, Fresh And Healthy In 20 Cm Size Of Earthen Pot / Plastic Pot 10059 Providing Of Livistona Palm Plant, Having Ht. 30 Cm To 45 Cm, Well Developed With 5 To 6 Leaves, Fresh & Healthy Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 1006 Mild Steel Square Bars 10060 Providing Of Livistona Palm Plant, Having Ht. 60 Cm To 75 Cm, Well Developed With 8 To 10 Leaves, Fresh & Healthy Foliage In 30 Cm Size Of Earthen Pot / Plastic Pot. 10061 Providing Of Monestaria Plant Mounted On Moss Stick 90 Cm Ht., 2 To 3 Plant In One Pot Well Developed With Fresh & Healthy Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10062 Providing Of Money Plant Broad Leaves Mounted On Moss Stick 90 Cm Ht., 3 To 4 Plants In Each Pot, Well Developed With Full Of Fresh & Healthy Leaves In Size Of 25 Cm Top Dia X 18 Cm Bottom Dia X 25 Cm Perpendicular Height Earthen Pot / Plastic Pot. 10063 Providing Of Money Plant Broad Leaves Mounted On Moss Stick 1.20 M Ht., 5 To 6 Plants In Each Pot, Well Developed With Full Of Fresh & Healthy Leaves In Size Of 25 Cm Top Dia X 18 Cm Bottom Dia X 25 Cm Perpendicular Height Earthen Pot / Plastic Pot. 10064 Providing Of Money Plant Golden Leaves Mounted On Moss Stick 90Cm Ht., Having 3 Plants At Equal Distance, Well Developed With Full Of Fresh, Shinning And Healthy Leaves From Bottom To Top In 25 Cm Size Of Earthen Pot / Plastic Pot. 10065 Providing Of Philodendron Burgundy Plant Mounted On Moss Stick 90 Cm Ht., Well Developed With Full Of Fresh & Healthy Leaves From Bottom To Top In 25 Cm Size Of Earthen Pot / Plastic Pot. 10066 Providing Of Philodendron Emrald Red Colour Plant, Mounted On Moss Stick 90 Cm Ht., Having 3 Plants Placed At Equal Distance, Well Developed With Full Of Fresh & Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10067 Providing Of Philodendron Envy Plant, Mounted On Moss Stick 90 Cm Ht., Well Developed With Full Of Fresh & Healthy Leaves In 30 Cm Size Of Earthen Pot / Plastic Pot. 10068 Providing Of Philodendron Oxicodium Plant, Mounted On Moss Stick 90 Cm Ht., Having 3 Plants Placed At Equal Distance, Well Developed With Full Of Fresh & Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10069 Providing Of Philodendron Oxicodium Golden Colour Plant, Mounted On Moss Stick 90 Cm Ht., Having 3 Plants Placed At Equal Distance, Well Developed With Full Of Fresh & Healthy Leaves In 25 Cm Top Dia X 18 Cm Bottom Dia X 25 Cm Perpendicular Height Earthen Pot / Plastic Pot. 1007 Structural Steel Such As Tees, Angles, Channels And R.S. Joists 10070 Providing Of Philodendron Oxicodium Golden Colour Plant, Mounted On Moss Stick 1.20 M Ht., Having 3 To 4 Plants Placed At Equal Distance, Well Developed With Full Of Fresh & Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10071 Providing Of Philodendron Oxicodium Plant, Mounted On Moss Stick 1.20 M Ht., Having 3 Plants Placed At Equal Distance, Well Developed With Full Of Fresh & Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. Secure 10072 Providing Of Philodendron Sellum Plant, Having Ht. 30 Cm To 45 Cm With 8 To 10 Leaves, Well Devleoped, Fresh And Healthy Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot 10073 Providing Of Philodendron Sellum Plant, Having Ht. 45 Cm To 60 Cm With 12 To 16 Leaves, Well Developed, Fresh And Healthy Foliage In 30 Cm Size Of Earthen Pot / Plastic Pot. 10074 Providing Of Philodendron Ceylon Gold Plant, Having Ht. 30 Cm To 45 Cm With 8 To10 Leaves, Well Developed, Fresh & Healthy Bright Colour Leaves In 15 Cm Size Of Earthen Pot / Plastic Pot. 10075 Providing Of Philodendron Ceylon Gold Plant, Having Ht. 30 Cm To 45 Cm With 8 To10 Leaves, Well Developed, Fresh & Healthy Bright Colour Leaves In 15 Cm Size Of Earthen Pot / Plastic Pot. 10076 Providing Of Philodendron Moonlight Plant, Having Ht. 30 Cm To 45 Cm With 10 To 12 Leaves, Well Developed, Fresh & Healthy Bright Colour Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10077 Providing Of Phoenix Palm Plant, Having Ht. 75 Cm To 90 Cm With 10 To 15 Or More Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. 10078 Providing Of Raphis Palm Plant, Having Ht. 45 Cm To 60 Cm With 5 To 7 Suckers, Well Developed, Full Of Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot / Plastic Pot. 10079 Providing Of Raphis Palm Plant, Having Ht. 75 Cm To 90 Cm With 12 To 15 Equal Suckers, Well Developed, Full Of Fresh & Healthy Leaves From Bottom To Top In 25 Cm Size Earthen Pot / Plastic Pot. 1008 Flats Up To 10 Mm In Thickness 10080 Providing Of Raphis Palm Plant, Having Ht. 75 Cm To 90 Cm With 15 To 18 Equal Suckers, Well Developed, Full Of Fresh And Healthy Leaves From Bottom To Top In 35 Cm Pvc Pots / C.Pots. 10081 Providing Of Raphis Palm Specimen Plant, Having Ht. 1.50 M To 1.65 M With 40 To 50 Lush Green Suckers, Well Developed, Fresh & Healthy Foliage Leaves In 40 Cm Size Of Earthen Pot / Chali / Tray. 10082 Providing Of Ceporthia Palm Plant, Having Ht. 90Cm To 1.20 M With 6-8 Suckers, Well Developed, Fresh And Healthy Lush Green Leaves From Bottom To Top In 20 Cm Size Of Earthen Pot / Plastic Pot. 10083 Providing Of Ceporthia Palm Plant, Having Ht. 1.20 M. To 1.50 M. With 8- 10 Suckers, Well Developed, Fresh And Healthy Lush Green Leaves From Bottom To Top In 25 Cm Size Of Earthen Pot / Plastic Pot. 10084 Providing Of Ceporthia Palm Plant, Having Ht. 1.50 M To 1.80 M With 12- 15 Suckers, Well Developed, Fresh And Healthy Lush Green Leaves From Bottom To Top In 30 Cm Size Of Earthen Pot / Plastic Pot. 10085 Providing Of Sanchezia Nobilis Plant, Having Ht. 30 Cm & Above, Well Developed With Fresh & Healthy Foliage In 20 Cm Size Of Earthen Pot / Plastic Pot. 10086 Providing Of Schefflera High Colour Plant, Having Ht. 23 Cm To 30 Cm, Well Developed With Fresh & Healthy Foliage In 20 Cm Size Of Earthen Pot / Plastic Pot. 10087 Providing Ofschefflera High Colour Plant ( Three In One ) , Having Ht. 23 Cm To 30 Cm, Well Developed With Fresh And Healthy Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10088 Providing Of Schefflera Green Plant ( Three In One ) , Mounted On Moss Stick 90 Cm, Well Developed With Full Of Fresh & Healthy Leaves From Bottom To Top With Rich Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10089 Providing Of Schieflera Verigated Plant, Mounted On Moss Stick 90 Cm Ht., 3 To 4 Plants Placed In Each Pot At Equal Distance, Well Developed With Full Of Fresh & Healthy Bright Leaves From Bottom To Top In 25 Cm Size Of Earthen Pot / Plastic Pot. 1009 Flats Exceeding 10 Mm In Thickness 10090 Providing Of Syngonium Golden Plant, Mounted On Moss Stick 90 Cm Ht., 3 To 4 Plants Placed In Each Pot At Equal Distance, Well Developed With Full Of Fresh & Healthy Leaves From Bottom To Top In 25 Cm Size Of Earthen Pot / Plastic Pot. 10091 Providing Of Syngonium Verigated Plant, Mounted On Moss Stick 90 Cm Ht., 3 To 4 Plants Placed In Each Pot At Equal Distance, Well Developed With Full Of Fresh & Healthy Leaves From Bottom To Top In 25 Cm Size Of Earthen Pot / Plastic Pot 10092 Providing Plant Allyssum White In Full Bloom Well Developed Fresh & Healthy Plant In 20 Cm Earthen Pot / Plastic Pot. 10093 Providing Plant Anemone Hybrid ( 3 In One ) Variety Well Developed With Fresh & Healthy Flower In Full Bloom In 25 Cm Earthen Pot / Plastic Pot. 10094 Providing Plant Antirrhinum Hybrid Dwarf Variety ( 3 In One ) Well Developed With Fresh & Healthy Flower Multi Branch In Full Bloom In 25 Cm Earthen Pot / Plastic Pot. Secure 10095 Providing Plant Antirrhinum Hybrid Dwarf Variety, Specimen ( 8-10 Plants ) With Fresh & Healthy Foliage In Full Bloom Well Developed In 35 Cm Earthen Tray / Challi Pot 10096 Providing Plant Antirrhinum Variety, Well Developed, Fresh & Healthy Multi Branched 30 To 45 Cm Ht, In Full Bloom With Stacking In 30 Cm Earthen Pot / Plastic Pot. 10097 Providing Plant Asiatic Lilly Hybrid Variety ( 3 In One ) Plants In Each Pot Having In Full Bloom 3 To 5 Flowers 30 To 45 Cm Ht. Well Developed In 25 Cm Earthen Pot / Plastic Pot 10098 Providing Plant Aster Hybrid Variety In Different Colour, Well Developed With Fresh & Healthy Foliage In Full Bloom 23 To 30 Cm Ht., In 20 Cm Earthen Pot / Plastic Pot. 10099 Providing Plant Bigonia Rex Having 15 To 23 Cm Ht., Well Developed With Fresh & Healthy Foliage With 10 To 12 Flowers In Bloom In 20 Cm Earthen Pot / Plastic Pot. 1010 Mild Steel Plates 10100 Providing Plant Brachycome Well Developed With Fresh & Healthy Foliage With 100 To 120 Flowers Stacking With Green Painted Bamboo Stick In 25 Cm Earthen Pot / Plastic Pot. 10101 Providing Plant Calceolaria Hybrid Variety In Full Bloom Well Developed With Fresh & Healthy Foliage In 20 Cm Earthen Pot / Plastic Pot. 10102 Providing Plant Calendula Double Variety Well Developed With Fresh & Healthy Foliage In Full Bloom In 20 Cm Earthen Pot / Plastic Pot. 10103 Providing Plant Chrysenthemum Double Variety, Well Developed, Having 45 To 60 Cm Ht., With 6 And Above Flowers With Half Blooming Condition, Fresh And Healthy With Bamboo Stacking In 25 Cm Earthen Pot 10104 Providing Plant Chrysenthemum Single Variety In Different Colour Well Developed Having 45 To 60 Cm Ht., Minimum 100 And Above Half Bloom Flowers Open Well Stacked With Bamboo Stick Having Three Layer Tiding By Thread Fresh And Healthy Foliage In 25 Cm Earthen Pot 10105 Providing Plant Chrysenthemum Single Named Variety In Different Colour Well Developed, Having 45 To 60 Cm Ht., Minimum 150 And Above Half Bloom Flowers Well Stacked With Bamboo Stick Having Three Layer Tiding By Thread Fresh And Healthy Foliage In 30 Cm Earthen Pot 10106 Providing Plant Cineraria Dwarf In Different Colour With Fresh & Healthy Foliage Well Developed In 20 Cm Earthen Pot / Plastic Pot 10107 Providing Plant Cineraria Hybrid Dwarf Variety In Different Colour Well Developed With Fresh & Healthy Foliage In Bloom In 25 Cm Earthen Pot / Plastic Pot. 10108 Providing Plant Cinereria Long 45 To 60 Cm Ht., 8 To 10 Branch With Full Bloom Specimen Plant With Green Painted Stacking In 30 Cm Earthen Pot / Plastic Pot 10109 Providing Plant Clarkia Well Developed With Fresh & Healthy Foliage, 5 To 6 Branch In Full Bloom With Stacking In 25 Cm Earthen Pot / Plastic Pot 1011 Steel Glazed Door, Window / Ventilator, All Members Viz, F7d, F4b, K11 And K12b Etc. 10110 Providing Plant Clianthus Well Developed, With Fresh & Healthy Foliage In Bloom 30 To 45 Cm Ht., With Stacking In 25 Cm Earthen Pot / Plastic Pot. 10111 Providing Plant Coleus Broad Leaves Having 3 To 4 Branches Equal Well Developed With Fresh & Healthy Foliage In Different Colour In 25 Cm Earthen Pot / Plastic Pot. 10112 Providing Plant Coleus Broad Leaves Having 5 To 6 Branches Equal Well Developed With Fresh & Healthy Foliage In Different Colour In 25 Cm Earthen Pot / Plastic Pot. 10113 Providing Plant Cyclemen Hybrid Variety Fresh & Healthy In Full Bloom Well Developed In 25 Cm Earthen Pot / Plastic Pot. 10114 Providing Plant Cyclemen Hybrid Variety Specimen 5-6 Plants Fresh & Healthy In Full Bloom Well Developed In 35 Cm Earthen Tray / Nand. 10115 Providing Plant Dahlia Double Kenya Variety In Different Colour Well Developed With 3 To 4 Flowers In Half Bloom, Good Foliage Stacked With Green Painted Bamboo Sticks, 45 To 60 Cm Height In 25 Cm Earthen Pot / Plastic Pot 10116 Providing Plant Dahlia Single In Different Colour With Fresh & Healthy Foliage Well Developed With 6 To 8 Half Blooming Buds In 20 Cm Earthen Pot / Plastic Pot. 10117 Providing Plant Daisy Well Developed With Fresh & Healthy Foliage In Full Bloom In 20 Cm Earthen Pot / Plastic Pot. 10118 Providing Plant Dianthus Dwarf In Different Colour Fresh & Healthy Bloom In 20 Cm Earthen Pot / Plastic Pot. 10119 Providing Plant Dianthus Dwarf Specimen 6-8 Plants With Fresh & Healthy Foliage In Full Bloom Well Developed In 35 Cm Earthen Tray / Nand Secure 10120 Providing Plant Dianthus In Different Colour Well Developed With Fresh & Healthy Foliage 30 Cm Ht., In Full Bloom With Stacking In 25 Cm Earthen Pot / Plastic Pot. 10121 Providing Plant Fressia Hybrid 6 To 8 Plants In Full Bloom, With Fresh And Healthy Flower And Foliage Stacked With Green Painted Bamboo Sticks In 25 Cm Earthen Pot / Plastic Pot. 10122 Providing Plant Gazania Hybrid In Different Colour Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot / Plastic Pot 10123 Providing Plant Geranium Double Variety Having 30 Cm Ht., In Different Colour Well Developed With Fresh & Healthy Foliage ( 3 In One ) Well 10124 Providing Plant Gerbera Hybrid, Well Developed, With Fresh And Healthy Foliage, Fully Blooms In 25 Cm Earthen Pot / Plastic Pot. 10125 Providing Plant Helianthus Different Colour With Full Bloom ( 3 In One ) Fresh & Healthy In 25 Cm Earthen Pot / Plastic Pot. Well Developed 10126 Providing Plant Impatiens In Different Colour Well Developed Fresh And Healthy ( 3 In One ) Well Bloomed In 25 Cm Earthen Pot / Plastic Pot. 10127 Providing Plant Marigold Jaffri Dwarf In Different Colour Well Developed With Fresh & Healthy Foliage With 12 To 15 Flowers In Full Bloom Specimen Plant 23 To 30 Cm Ht. In 20 Cm Earthen Pot / Plastic Pot. 10128 Providing Plant Marigold Jaffri Orange / Yellow / Russet Colour Well Developed With Fresh & Healthy Foliage With 40 To 50 Flowers In Bloom Specimen Plant 60 To 75 Cm Ht In 25 Cm Earthen Pot / Plastic Pot. 10129 Providing Plant Marigold Jaffri French Orange / Yellow / Russet Colour Well Developed With Fresh & Healthy Foliage With 60 To 75 Flowers In Bloom Specimen Plant 60 To 75 Cm Ht In 30 Cm Earthen Pot / Plastic Pot. 1013 Mild Steel Sheets For Tanks 10130 Providing Plant Kalanchoe Hybrid Variety In Different Colour Well Developed With Fresh & Healthy Foliage In Full Bloom In 20 Cm Earthen Pot / Plastic Pot. 10131 Providing Plant Marigold ( Tagetes ) Inca Hybrid Different Colour Having 30 Cm And Above Ht., With 6 To 8 Flowers In Bloom & Blooming Condition, Well Developed Pot Should Be Fully Covered With Fresh And Healthy, Foliage And Flowers In 20 Cm Earthen Pot / Plastic Pot. 10132 Providing Plant Mimulus Multi Branching Bushy Plant In Different Colour Well Developed Fresh & Healthy In Full Bloom In 20 Cm Earthen Pot In 20 Cm Earthen Pot / Plastic Pot. 10133 Providing Plant Missbranthemum In Different Colour Well Developed With Fresh & Healthy Foliage In Full Bloom In 20 Cm Earthen Pot / Plastic Pot. 10134 Providing Plant Nemasia Well Developed With Fresh & Healthy With Good Attractive Foliage Full Blooming In 20 Cm Earthen Pot / Plastic Pot. 10135 Providing Plant Nasturtium In Different Colour Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot In 20 Cm Earthen Pot / Plastic Pot. 10136 Providing Plant Ornamental Kale Hybrid Variety In Full Bloom With Fresh & Healthy Foliage Well Developed In 25 Cm Earthen Pot In 20 Cm Earthen Pot / Plastic Pot. 10137 Providing Plant Pansy Hybrid Sakata In Different Colour Specimen 6-8 Plants With Fresh & Healthy Foliage In Full Bloom Well Developed In 35 Cm Earthen Tray / Nand 10138 Providing Plant Pansy Hybrid Sakata Well Developed With Fresh & Healthy Foliage With 3 To 4 Flower In Bloom In 20 Cm Earthen Pot / Plastic Pot. 10139 Providing Plant Pansy Hybrid Sakata In Different Colour With Fresh & Healthy Foliage Well Developed In 15 Cm Earthen Pot / Plastic Pot. 10140 Providing Plant Petunia Hybrid Different Colour Single Well Developed In Full Bloom In 20 Cm Earthen / Plastic Pot. 10141 Providing Plant Petunia Hybrid Different Variety In Different Colour Well Developed With Fresh And Healthy Foliage In Full Bloom In 25 Cm Earthen Pot / Plastic Pot. 10142 Providing Plant Petunia Hybrid In Different Colour With Fresh & Healthy Foliage Well Developed In 15 Cm Earthen Pot / Plastic Pot 10143 Providing Plant Petunia Hybrid Well Developed With Fresh & Healthy Foliage In Full Bloom 6-8 Plants In 35 Cm Earthen Tray / Nand 10144 Providing Plant Phlox In Different Colour Well Developed With Fresh & Healthy Foliage 30 Cm Ht., In Full Bloom With Stacking In 25 Cm Earthen Pot / Plastic Pot. 10145 Providing Plant Poincettia Dwarf Variety Different Colour Well Developed 23 To 30 Cm Ht., 3 To 4 Branch Full Bloom With Fresh & Healthy Foliage In 15 Cm Earthen Pot / Plastic Pot. 10146 Providing Plant Poincettia Dwarf Multi Head, Having Upto 30 Cm Ht., With 3 To 4 Branches With Fully Different Coloured Top With Fresh & Healthy Foliage Well Developed In 20 Cm Earthen Pot / Plastic Pot. Secure 10147 Providing Plant Primula Hybrid Variety Specimen 5-6 Plants In Each Pot With Fresh & Healthy Foliage In Full Bloom Different Colour Well Developed In 35 Cm Earthen Tray / Nand 10148 Providing Plant Primula Hybrid Variety Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot / Plastic Pot. 10149 Providing Plant Primula Hybrid Variety Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot / Plastic Pot 1015 Mild Steel Expanded Metal 20X60xmm Strands 10150 Providing Plant Ranunculus Hybrid Variety Well Developed With Fresh & Healthy Foliage With 2-3 Flower In Bloom In 25 Cm Earthen Pot / Plastic Pot. 10151 Providing Plant Salvia Dwarf Variety With Fresh & Healthy Foliage Well Developed Multi Branching In Blooming Stage In 15 Cm Earthen Pot / Plastic Pot. 10152 Providing Plant Salvia Ht. 45 To 60 Cm Multi Branches Stacking With Bamboo Stick Specimen Plants Type With Full Bloom Well Developed In 30 Cm Earthen Pot / Plastic Pot 10153 Providing Plant Salvia Ht. 45 To 60 Cm Multi Branches Stacking With Bamboo Stick Specimen Plants Type With Full Bloom Well Developed In 25 Cm Earthen Pot / Plastic Pot. 10154 Providing Plant Salvia Red Hybrid Dwarf Variety Having 15 Cm To 23 Cm Ht., Well Developed With Fresh & Healthy Foliage In Bloom In 20 Cm Earthen Pot / Plastic Pot. 10155 Providing Plant Salvia Red Hybrid Dwarf Variety Having 15 To 23 Cm Ht., Specimen 6 Plants With Fresh & Healthy Foliage In Full Bloom Well Developed In 35 Cm Earthen Tray / Nand 10156 Providing Plant Star Of Bethlem ( Chinchi - Rinchi ) , 5 To 6 Plant In Each Pot Full Bloom, With Fresh And Healthy Foliage Flower In 25 Cm Earthen Pot / Plastic Pot. 10157 Providing Plant Stock Double Blue Non-Branching Having 30 To 45 Cm Ht., With Full Bloom, Well Developed In 20 Cm Earthen Pot / Plastic Pot. 10158 Providing Plant Stock Double White Colour Dwarf Variety With Fresh And Healthy Foliage With Bloom In 20 Cm Earthen Pot / Plastic Pot. 10159 Providing Plant Stock Double White Colour Dwarf Variety With Fresh And Healthy Foliage With Bloom In 20 Cm Earthen Pot / Plastic Pot. 10160 Providing Plant Stock Double White Colour Dwarf Variety With Fresh And Healthy Foliage With Bloom In 20 Cm Earthen Pot / Plastic Pot. 10161 Providing Plant Stock Double White Colour Dwarf Variety With Fresh And Healthy Foliage With Bloom In 20 Cm Earthen Pot / Plastic Pot. 10162 Providing Plant Celosia Well Developed Fresh & Healthy 20 To 25 Cm Ht. ( Attractive ) Multi Branching At Blooming Stage In 20 Cm Earthen Pot / Plastic Pot. 10163 Providing Plant Cladium Hybrid Variety 3 To 4 Plants Well Developed With Fresh & Healthy Foliage 30 To 45 Cm Ht. In Different Colour 25 Cm Earthen Pot / Plastic Pot. 10164 Providing Plant Cockscomb Well Developed Fresh & Healthy 20 To 25 Cm Ht. Attractive Colours Fully Bloomed In 20 Cm Earthen Pot / Plastic Pot. 10165 Providing Plant Cosmos Well Developed Fresh & Healthy 20 To 25 Cm Ht. Attractive Colours Multi Branching At Blooming Stage In 20 Cm Earthen Pot / Plastic Pot. 10166 Providing Plant Gaillardia Double Hybrid Variety Well Developed 30 To 45 Cm Ht 20 To 30 Fresh & Healthy Flower With Green Painted Bamboo Stick In 25 Cm Earthen Pot / Plastic Pot. 10167 Providing Plant Gamphrina Well Developed Fresh & Healthy 30 To 45 Cm Ht. Bushy Plant 15 & Above Flower In 25 Cm Earthen Pot / Plastic Pot. 10168 Providing Plant Kochia Well Developed Fresh & Healthy 30 To 45 Cm Ht. Lush Green Well Shaped In 25 Cm Earthen Pot / Plastic Pot. 10169 Providing Plant Kochia Well Developed Fresh & Healthy 20 To 25 Cm Ht. Lush Green Well Shaped In 20 Cm Earthen Pot / Plastic Pot. 10170 Providing Plant Portulaka Hybrid In Different Colour With Bloom Well Developed Fresh & Healthy In 20 Cm Earthen Pot / Plastic Pot. 10171 Providing Plant Sunflower Hybrid Well Developed 15 To 20 Cm Ht. With Fresh & Healthy Foliage At Blooming Stage In 20 Cm Earthen Pot / Plastic Pot. 10172 Providing Plant Sunflower Single Well Developed 8 To 10 Half Bloom Buds Multi Branched In Fresh & Healthy Full Stacked With Green Painted Bamboo Stick Stacking In 25 Cm Earthen Pot / Plastic Pot. 10173 Providing Plant Tapioca Variegated ( Manihot Esculenta ) Well Developed Fresh & Healthy 30 To 45 Cm Ht. In Bright Colour Foliage In 25 Cm Earthen Pot / Plastic Pot. 10174 Providing Plant Vinca Different Colour 6 To 8 Well Developed Branch In Full Bloom Stacked With Green Painted Bamboo Stick In 25 Cm Earthen Pot / Plastic Pot. Secure 10175 Providing Plant Vinca Different Colour Fresh & Healthy 23 To 30 Cm Ht. With Bloom Multi Branchy In 20 Cm Earthen Pot / Plastic Pot. 10176 Providing Plant Vinca Hybrid In Different Colour Fresh & Healthy 20 To 25 Cm Ht. With Bloom In 20 Cm Earthen Pot / Plastic Pot. 10177 Providing Plant Zinnia Hybrid Double In Different Colour Well Developed Fresh & Healthy 30 To 45 Cm Ht. ( 3 To 4 Plants In Each Pot ) Full Bloom In 25 Cm Earthen Pot / Plastic Pot. 10178 Providing Plant Budded Rose ( H.T. Variety ) 3 To 4 Healthy Branch 30 Cm And Above Ht. Well Developed With One And Above Flower Plant In 20 Cm Earthen Pot, 10179 Providing Plant Creeper Rose Variety 3 To 4 Healthy Branch 60 Cm And Above Ht. Well Developed With One And Above Flowers In 25 Cm Earthen Pot, 10180 Providing Plant Standard Rose ( H.T. Variety ) 3 To 4 Healthy Branch 90 Cm And Above Ht. Well Developed With One And Above Flowers In 25 Cm Earthen Pot 10181 Acalypha Different Colour Well Developed, Fresh & Healthy With Good Foliage, Multi Branch 30 To 45 Cm Ht. Plant In 20 Cm Size Of Earthen Pot / Plastic 10182 Acalypha Green Well Developed, Fresh & Healthy With Good Foliage, Multi Branch 30 To 45 Cm Ht. Plant In 20 Cm Size Earthen Pot / Plastic 10183 Acalypha Red Well Developed With Fresh & Healthy 30 To 45 Cm Ht. Plant In 20 Cm Size Earthen Pot / Plastic Pot 10184 Acalypha Twisted Well Developed With Fresh & Healthy 30 Cm Ht. Plant In 20 Cm Size Earthen Pot / Plastic Pot 10185 Adenium Obesum Grafted Well Developed With Fresh & Healthy 30 To 60 Cm Ht. Plant In 25 Cm Size Earthen Pot / Plastic Pot 10186 Adenium Obesum Well Developed With Fresh & Healthy 4 To 5 Branch 60 To 75 Cm Ht. Plant In 40 Cm Size Earthen Pot / Plastic Pot 10187 Bamboo Buddha Valley With Fresh & Healthy 3 To 4 Suckers Having 75 To 90 Cm Ht. Plant In 25 Cm Size Earthen Pot / Plastic Pot 10188 Bamboo Buddha Vally Variety With Umbrella Shape Plant Having 120 To 135 Ht. Plant With Fresh & Healthy Foliage Well Developed In 40 Cm Cement Pot Multy Branch, Bushy Plant 10189 Bamboo Buddha Valley With Fresh & Healthy 5 To 6 Suckers 1.80 M To 2.10M Ht Umbrella Type Plant Well Developed In 50 Cm Cement Pot 1019 Mild Steel Hooks 10190 Bird Of Paradise Well Developed With Fresh & Healthy 90 To 120 Cm Ht In 30 Cm Earthen Pot / Plastic Pot 10191 Bismarkia Palm 115 To 180 Cm Ht. Plant, Well Developed 12 And Above Good Color Fresh And Healthy Leaves In 40 Cm Cement Pot. 10192 Bougainvillea Named Variety, Sobhra, Thima, Marry Palmar, Cherry Blossom Etc. Well Developed With Fresh & Healthy Bushy Plant In Full Bloom 75 To 90 Cm Ht. Plant In 40 Cm Cement Pot 10193 Cycus Circinallis Well Developed With Fresh & Healthy 35 To 40 Lush Green Leaves In 40 Cm Cement Pot 10194 Cycus Revoluta In 35 Cm Challi, Specimen Plant, Having 30 To 40 With Fresh And Healthy, Leaves Having 25Cm To 30Cm Circumfrance Of Base Stem Well Developed 10195 Cycus Revoluta Specimen Plant, Having 45 To 50 Fresh And Healthy, Leaves Having 30Cm To 35Cm Circumfrance Of Base Stem Well Developed In 40 Cm Challi, 10196 Cyprus Golden 30 To 45 Cm Ht. Plant Well Developed Good Golden Colour Foliage, Conial Shape In 25 Cm Earthen Pots 10197 Cyprus Golden Well Shaped Developed With Good Colored Foliage Fresh & Healthy 60 To 75 Cm Ht In 30 Cm Earthen Pot 10198 Cyprus Golden Conical Shape 150 To 165 Cm Ht. Plant, With Fresh And Healthy Golden Colour Foliage In 35Cm Cement Pot 10199 Euphorbia Milli Hybrid Variety With Multi Branch, Full Bloom, With Fresh And Healthy Well Developed Having 30 To 45 Cm Ht. Plant In 35 Cm Cement Pots 1020 Mild Steel Rivets 10200 Ficus Black Vivion Piller Topairy ( Sylinder Type ) Well Developed With Fresh & Healthy 180 To 210 Cm Ht In 40 Cm Cement Pot 10201 Ficus Long Island Topairy Well Developed With Fresh & Healthy 5 To 6 Ball Specific Size And Shape 120 To 150 Cm Ht In 40 Cm Cement Pot 10202 Ficus Nuda Topairy Well Developed With Fresh & Healthy 5 To 6 Big Ball Specific Size And Shape 180To 210Cm Ht In 40 Cm Cement Pot 10203 Ficus Nuda Well Developed With Fresh & Healthy Foliage 45 To 60Cm Spread 75 To 90 Cm Ht. Plant Bushy Plant In 35 Cm Cement Pot Secure 10204 Ficus Retusa Topairy Well Developed With Fresh & Healthy 5 To 6 Big Ball Specific Size And Shape 180 To 210Cm Ht In 40 Cm Cement Pot 10205 Ficus Resnold Well Developed Fresh & Healthy Foliage 60 To 75 Cm Spread 105 To 120 Cm Ht. Plant, Bushy Plant In 35 Cm Cement Pot 10206 Ficus Resnold Piller Type Topairy Well Developed With Fresh & Healthy 210 To 240 Cm Ht In 40 Cm Cement Pot 10207 Ficus Resnold Topairy Well Developed With Fresh & Healthy 6 To 7 Big Ball Specific Size 210 To 240 Cm Ht In 45 Cm Cement Pot 10208 Ficus Starlight With Fresh, Healthy And Attractive Foliage 45 To 60 Cm Spread 75 To 90 Cm Ht. Plant, Specimen Bushy Plant, In 35 Cm Cement Pot 10209 Fishtail Palm Well Developed With Fresh & Healthy Foliage Leaves Of Ht 210 To 240Cm Specimen Plant In 35 Cm Cement Pot 1021 Hard Drawn Steel Wire Fabric 10210 Foxtail Palm Well Developed With Fresh & Healthy Foliage Of Ht. Plant 210 To 240 Cm In Big 40 Cm Cement Pot 10211 Furcaira Variegated Well Developed With Fresh & Healthy Foliage 8 To 10 Leaves In 30 Cm Earthen Pot 10212 Furcaria Variegated Hybrid Well Developed With Fresh & Healthy Foliage 20 And Above Attractive Leaves In 35 Cm Cement Pot 10213 Golden Bottle Brush Topairy Well Developed With Fresh & Healthy Foliage 5 To 6 Big Ball 115 To 180 Cm Ht In 40 Cm Cement Pot 10214 Zamia Palm Well Developed With Fresh & Healthy Leaves 90 Cm Ht In 35 Cm Cement Pot 10215 Latania Rubra Palm Well Developed With Fresh & Healthy Foliage 150 To 180 Cm Ht. Plant With 6 To 7 Leaves In Big 35 Cm Cement Pot 10216 Mascarena Palm Well Developed With Fresh & Healthy Foliage Leaves 150 To 180 Cm Ht In 35 Cm Cement Pot 10217 Phoenix Roebelenii Palm Well Developed Having 20 To 25 Fresh & Healthy Leaves 90 To 105 Cm Ht. Plant In 30 Cm Cement Pot 10218 Topairy Plant Of Ficus Bush King Well Developed With Fresh & Healthy Foliage From Top To Bottom With Single Piller 60 To 75 Cm Spread, 210 To 225 Cm Ht. Plant, In 35 Cm Cement Tray / Cement Pot 10219 Topairy Plant Of Ficus Nuda Well Developed With Fresh & Healthy Foliage From Top To Bottom With Single Piller 75 To 90 Cm Spread, 195 To 210 Cm Ht. Plant In 35 Cm Cement Tray / Cement Pot 1022 Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots 10220 Topairy Plant Of Ficus Panda Well Developed With Fresh & Healthy Foliage With 3 To 4 Ball And 60 To 75 Cm Spread Each Ball, 135 To 150 Cm Ht. Plant, In 35 Cm Cement Tray / Cement Pot 10221 Topiary Plant Casuarina Plant Fresh & Healthy Having 5 To 6 Specific Shape And Size Ball Well Developed 195 To 210 Cm Ht. Plant In 40 Cm Cement Pot 10222 Traveller Palm Well Developed With Fresh & Healthy Foliage 120 To 150 Cm Ht. Plant In 35 Cm Cement Pot 10223 Travellar Palm Well Developed With Fresh & Healthy Leaves Foliage 210 To 240 Cm Ht Specimen Plant In 40 Cm Cement Pot 10224 Washingtonia Filifera Palm Well Developed 90 To 105 Cm Ht. Plant Having 5 To 6 Straight Fresh And Healthy Leaves In 35 Cm Cement Pot 10225 Alpinia Variegated ( Three In One ) Plant Having Ht. 30 Cm And Above, With Fresh And Healthy Variegated Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10226 Alternanthera Species Plant Of Height 15 Cm To 20 Cm, Full Of Branches And Foliage In 15 Cm Size Of Earthen Pot / Plastic Pot. 10227 Asparagus Marrie Plant, Well Developed 15 To 20 Leaves, Full Of Branches And Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10228 Topairy Plant Of Ficus Bush King Well Developed With Fresh & Healthy Foliage From Top To Bottom With Single Piller 60 To 75 Cm Spread, 210 To 225 Cm Ht. Plant, In 35 Cm Cement Tray / Cement Pot 10229 Aspidistra Plant, Having 10 To 15 Leaves Well Developed With Fresh & Healthy In 25 Cm Size Of Earthen Pot / Plastic Pot. 1023 Galvanised Steel J Or L Hooks 8 Mm Dia 10230 Clerodendron Inerme Plant Having Ht. 25 Cm To 32 Cm Multi Branched In 20 Cm Size Of Earthen Pot / Plastic Pot. 10231 Clerodendron Inerme Plant Of Ht. 30 Cm To 40 Cm Multi Branched In 25 Cm Size Of Earthen Pot / Plastic Pot. 10232 Chlorophytum ( Green ) Plant, Full Of Leafy Suckers In 20 Cm Size Of Earthen Pot / Plastic Pot. 10233 Chlorophytum-Variegated Plant, Full Of Leafy Suckers In 15 Cm Size Of Earthen Pot / Plastic Pot. Secure 10234 Cuphea Chinensis Plant Of Ht. 30-45 Cm Full Of Branches And Healthy Foliage In 25 Cm Size Of Earthen Pot / Plastic Pot. 10235 Dianella Variegated Plant, With 3 To 4 Variegated Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot. 10236 Duranta Golden Plant, Having Ht.15 To 20 Cm Bushty Shape Plant With Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot. 10237 Euphorbia Milli Hybrid Variety Plant, Having Ht.30 Cm To 45 Cm With Multi Branch, Full Bloom, Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot. 10238 Euphorbia Milli Hybrid Variety Plant, Having Ht. 30 Cm To 45 Cm With Multi Branch, Full Bloom, Fresh And Healthy Leaves In 30 Cm Size Of Earthen Pot / Plastic Pot. 10239 Ipomea ( Golden Leaves ) Plant, With Fresh And Healthy Leaves In 15 Cm Size Of Earthen Pot / Plastic Pot. 1024 Galvanished Steel Bolts & Nuts 10 Mm Dia And 125 Mm Long Round Head With Slots 10240 Iresine Herbstii Plant, Of Height 20-30 Cm. Full Of Branches Well Developed In 15 Cm Size Of Earthen Pot / Plastic Pot. 10241 Iresine Herbstii Plant, Of Height 20-30 Cm., Full Of Branches Well Developed In 20 Cm Size Of Earthen Pot / Plastic Pot. 10242 Juniperus Prostrata Plant With 5 To 6 Latral Branches And Green Foliage In 20 Cm Size Of Earthen Pot / Plastic Pot. 10243 Ophiopogon Plant, Green / Black Full Of Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot. 10244 Ophiopogon Jaburan ( Variegated ) Plant, Full Of Variegated Leaves In 15 Cm Size Of Earthen Pot / Plastic Pot 10245 Ophiopogon Jaburan ( Variegated ) Plant, Full Of Variegated Leaves In 20 Cm Earthen Pot / Plastic Pot 10246 Portulacaria Afra ( Jade Plant ) With 5 To 6 Branches In 20 Cm Size Of Earthen Pot / Plastic Pot 10247 Schflera Green Plant, Having 3 To 4 Branch, Ht. 30 To 45 Cm Well Developed With Fresh & Healthy In 20 Cm Size Of Earthen Pot / Plastic Pot. 10248 Setcreasea Purpurea Full Of Variegated Leaves In 20 Cm Size Of Earthen Pot / Plastic Pot. 10249 Syngonium ( Butterfly ) Variegated With 2-3 Suckers Healthy Foliage In Earthen Pot / Plastic Pot Of Size 20 Cm. 1025 Mild Steel Bolts 6 Mm Dia And 25 Mm Long With Hexagonal Head 10250 Syngonium Golden Of Height 30-45 Cm. With 2-3 Suckers Healthy Foliage In Earthen Pot / Plastic Pot Of Size 20 Cm. 10251 Syngonium Miniature Dwarf Plant, Having Height 30-45 Cm. With 2-3 Suckers Healthy Foliage In Earthen Pot / Plastic Pot Of Size 20 Cm. 10252 Syngonium Variegated Plant, Of Height 30-45 Cm. With 2-3 Suckers Healthy Foliage In Earthen Pot / Plastic Pot Of Size 20 Cm. 10253 Tradiscantia Plant, Full Of Leaves In Earthen Pot / Plastic Pot Of Size 20 Cm 10254 Wadelia Trilobata Plant, Full Of Leaves In 15 Cm Size Of Poly Bags. 10255 Zebrina Trades Cantia Plant Having In 20 Cm Size Of Earthen Pot / Plastic Pot. 10256 Acacia Auriculiformis Of Plants Ht 150-165 Cm In Bag Size Of Plants 25 Cm 10257 Adansonia Digitata ( Kalp Vricksh ) Of Plants Ht 150-165 Cm In Bag Size Of Plants 25 Cm 10258 Albizzia Lebbek Of Plants Height 150-165 Cm. In Bag Of Plants Size 25 Cm 10259 Alstonia Scholaris Of Plants Height 150-165 Cm. In Bag Of Plants Size 25 Cm 10260 Azadirachta Indica ( Neem ) Of Plants Height 120-130Cm In Big Polybag Of Plants Size 25 Cm 10261 Bassia Latifolia ( Mahua ) Of Plants Height 90-105 Cm. In Big Polybag Of Plants Size 25 Cm 10262 Bauhinia Blakeana ( Kachnar ) Of Plants Height 120-150 Cm. In Big Poly Bags Of Plants Size 25 Cm 10263 Bauhinia Purpurea ( Kachnar ) Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10264 Bombax Ceiba Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10265 Bottle Palm Of Plants Ht. 150-180 Cm Bottom Girth 20-25 Cm Well Devedoped In Big Poly Bags Of Plants Size 25 Cm 10266 Bottle Palm Of Plants Ht. 210-240 Cm Bottom Girth 30-35 Cm Well Devedoped In Big Hdpe Bags. 10267 Bottle Palm Of Plants Ht. 210-240 Cm Bottom Girth 30-35 Cm Well Devedoped In Big Hdpe Bags. Secure 10268 Butea Frondosa ( Flame Of Plants Fores Iks / Kkt ) Of Plants Height 60-75 Cm. In Big Poly Bags Of Plants Size 25 Cm 10269 Callistemon Lanceolatus Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10270 Casuarina Equisetifolia Of Plants Height 150-165 Cm In Big Poly Bags Of Plants Size 25 Cm 10271 Cassia Fistula ( Amaltash ) Of Plants Height 120-135 Cm. In Big Poly Bags Of Plants Size 25 Cm 10272 Cassia Siamea Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10273 Cassia Javanica Of Plants Height 120-150 Cm. In Big Poly Bags Of Plants Size 25 Cm 10274 Cassia Nodosa Of Plants Height 120-150 Cm. In Big Poly Bags Of Plants Size 25 Cm 10275 Ceiba Pentandra Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10276 Chorisia Speciosa Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10277 Chukrassia Tabularis Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10278 Dalbergia Sissoo ( Seasam ) Of Plants Height 120-135 Cm. In Big Poly Bags Of Plants Size 25 Cm 10279 Delonix Regia ( Gulmohar ) Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 1028 Straining Bolts 10280 Erythrina Indica Of Plants Height 150-165 Cm. In Big Polybag Of Plants Size 25 Cm 10281 Ficus Benjamina ( Green ) Of Plants Height 120-135 Cm. With 6-8 Branches And Lush Green Foliage In Gunny Bags Of Plants Size 25 Cm 10282 Ficus Benjamina ( Green ) Of Plants Height 150-165 Cm., Bushy With Healthy Branches And Lush Green Foliage In Big Size Hdpe Bags 10283 Ficus Bengalensis ( Bargad ) Of Plants Height 120-135 Cm. In Big Poly Bags Of Plants Size 25 Cm 10284 Ficus Bengalensis ( Varigated ) Of Plants Height 75-90 Cm., Multibranched In Earthen Pots Of Plants Size 30 Cm 10285 Ficus Bengalensis Krishna Of Plants Height 75-90 Cm., Multibranched In Earthen Pots Of Plants Size 30 Cm 10286 Ficus Elastica Decora ( Rubber Plant ) Of Plants Height 45-60 Cm. In Earthen Pots Of Plants Size 25 Cm 10287 Ficus Infectoria ( Pilkhan ) Of Plants Height 150-165 Cm. In Big Polybag Of Plants Size 25 Cm 10288 Ficus Iyrata Of Plants Height 45-60 Cm. In Earthen Pots Of Plants Size 25 Cm 10289 Ficus Nuda Of Plants Height 120-135 Cm. With 6-8 Branches And Lush Green Foliage In G. Bags Of Plants Size 25 Cm 1029 Galvanished Steel Barbed Wire 10290 Ficus Nuda Of Plants Height 150-165 Cm., Bushy With Healthy Branches And Lush Green Foliage In Big Size Hdpe Bags 10291 Ficus Religiosa ( Pepal ) Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 30 Cm 10292 Ficus Retusa Well Branched Of Plants Height 120-135 Cm. In Big Poly Bags Of Plants Size Of Plants 30 Cm 10293 Ficus Shiela Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10294 Fishtail Palm Of Plants Ht. 150-180 Cm Bottom Girth 15-20 Cm Well Developed In Big Poly Bags Of Plants Size 25 Cm 10295 Fishtail Palm Of Plants Ht. 210-240 Cm Bottom Girth 25-30 Cm Well Developed In Big Size Hdpe Bags 10296 Fishtail Palm Of Plants Ht. 270-300 Cm Bottom Girth 40-50 Cm Well Developed In Big Size Hdpe Bags 10297 Foxtail Palm Of Plants Ht. 120-150 Cm Bottom Girth 15-20 Cm Well Developed In Big Poly Bags Of Plants Size 25 Cm 10298 Foxtail Palm Of Plants Ht. 180-210 Cm Bottom Girth 25-30 Cm Well Developed In Big Size Hdpe Bags 10299 Foxtail Palm Of Plants Ht. 240-270 Cm Bottom Girth 35-40 Cm Well Developed In Big Size Hdpe Bags 1030 Galvanised Steel Turn Buckles 10300 Grevillea Robusta ( Silver Oak ) Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm Secure 10301 Heterophragma Adenophyllum ( Marore Fali ) Of Plants Height 150-165 Cm. In Big Poly Bag Of Plants Size 25 Cm 10302 Ingla Dulcis ( Jungle Jalebi ) Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10303 Jacaranda Mimosifolia Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10304 Kigelia Pinnata Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10305 Lagerstroemia Flosreginae Of Plants Height 150-165 Cm.In Big Poly Bag Of Plants Size 25 Cm 10306 Lagerstroemia Thorelli Of Plants Height 150-165 Cm.In Big Poly Bag Of Plants Size 25 Cm 10307 Magnolia Grandiflora Of Plants Height 150-165 Cm. In Big Poly Bag Of Plants Size 25 Cm 10308 Mangifera Indica ( Mango-Grafted ) Of Plants Height 60-75 Cm. In Big Poly Bag Of Plants Size 25 Cm 10309 Melia Azedarach Of Plants Height 120-135 Cm. In Big Poly Bag Of Plants Size 25 Cm 1031 Galvanised Steel Bolts & Nuts 10 Mm Dia And 27 Cm Long Both Sides Threaded With 4 Galvanised Steel Nuts 10310 Michelia Champa ( Golden Champa ) Of Plants Height 90-105 Cm. In Earthen Pots Of Plants Size 25 Cm 10311 Milletia Ovalifolia Of Plants Height 120-135 Cm. In Big Poly Bag Of Plants Size 25 Cm 10312 Millingtonia Hortensis Of Plants Height 150-165 Cm. In Big Poly Bag Of Plants Size 25 Cm 10313 Mimusops Elengi ( Maulsri ) Of Plants Height 150-165 Cm. In Big Poly Bag Of Plants Size 25 Cm 10314 Mimusops Elengi ( Maulsri ) Of Plants Height 180-195 Cm., Well Developed With Thick Stem In Big In Big Size Hdpe Bag 10315 Nauclea Cadamba ( Kadam ) Of Plants Height 150-165 Cm. In Big Poly Bag Of Plants Size 25 Cm 10316 Parkinsonia Species Of Plants Height 120-135 Cm. In Big Poly Bag Of Plants Size 25 Cm 10317 Peltophorum Speciesof Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10318 Phoenix Sylvestris Roxb. ( Wild Date Palm / Khajur ) Of Plants Height 150- 165 Cm. In Big Hdpe Bag 10319 Phyllanthus Emblica ( Amla ) Of Plants Height 150-165 Cm. In Big Hdpe Bag 1032 Galvanised Steel Bolts 10 Mm Dia And 7 Cm Long With Nuts 10320 Pinus Longifolia ( Pinus ) Of Plants Height 90-105 Cm. In Cement Pots Of Plants Size 35 Cm 10321 Pithecellobium Dulce ( Jungle Jalebi ) Of Plants Height 120-150 Cm. In Big Hdpe Bag 10322 Plumeria Acutifolia Of Plants Height 120-135 Cm. With 2-3 Branches In Hdpe Bag Of Plants Size 30 Cm 10323 Plumeria Acutifolia Of Plants Height 150-165 Cm. With 3-4 Branches In Big Size Hdpe Bag 10324 Plumeria Alba Of Plants Height 120-135 Cm. With 2-3 Branches In Bags Of Plants Size 30 Cm 10325 Plumeria Alba Of Plants Height 165-180 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags 10326 Plumeria Alba Dwarf Of Plants Height 90-105 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags 10327 Plumeria Rubra Of Plants Height 120-150 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags 10328 Pongamia Glabra ( Papri ) Of Plants Height 120-135 Cm. In Big Poly Bag Of Plants Size 25 Cm 10329 Polyalthia Longifolia ( Ashok ) Of Plants Height 150-165 Cm. In Earthen Pots Of Plants Size 25 Cm 10330 Polyalthia Longifolia ( Ashok ) Of Plants Height 180-195 Cm. In Gunny Bag Of Plants Size 30 Cm 10331 Polyalthia Pendula ( Ashok Pendula ) Of Plants Height 150-165 Cm. In Earthen Pots Of Plants Size 25 Cm 10332 Polyalthia Pendula ( Ashok Pendula ) Of Plants Height 180-195 Cm. In Gunny Bag Of Plants Size 30 Cm 10333 Pterospermum Acerifolium ( Kanak Champa ) Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm Secure 10334 Putranjiva Roxburghii Of Plants Height 90-105 Cm. In Big Polybag Of Plants Size 25 Cm 10335 Saraca Indica ( Sita Ashok ) Of Plants Height 105-120 Cm. In Big Poly Bags Of Plants Size 25 Cm 10336 Schleichera Trijuga ( Kusum ) Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10337 Spathodea Campanulata Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10338 Eugenia Jambolana ( Jamun ) Of Plants Height 150-165 Cm. In Big Poly Bags Of Plants Size 25 Cm 10339 Tabebuia Sp. Of Plants Height 150-165 Cm. In Big Polybags Of Plants Size 25 Cm 1034 Bolts And Nuts Up To 300 Mm In Length 10340 Tamarindus Indica ( Imli ) Of Plants Height 120-150 Cm. In Big Polybags Of Plants Size 25 Cm 10341 Tecoma Argentea Of Plants Height 120-135 Cm. In Big Poly Bag Of Plants Size 25 Cm 10342 Tectona Grandis ( Teak ) Of Plants Height 150-165 Cm. In Big Polybags Of Plants Size 25 Cm 10343 Terminalia Arjuna Of Plants Height 150-165 Cm. In Big Polybags Of Plants Size 25 Cm 10344 Washingtonia Filifea Palm Stem Ht. 90-105 Cm With 6-7 Healthy Leaves Lush Green Leaves Well Developed In Big Size Hdpe Bags 10345 Washingtonia Filifea Palm Stem Ht. 120-135 Cm With 8-10 Healthy Leaves Lush Green Leaves Well Developed In Big Size Hdpe Bags 10346 Supply And Stacking Of Plant Bauhinia Acuminata Height 60-75 Cm. In Earthen Pots Of Size 20 Cm 10347 Supply And Stacking Of Plant Bauhinia Acuminata Height 60-75 Cm. In Earthen Pots Of Size 20 Cm 10348 Supply And Stacking Of Plant Beloperone Species Of Height 30-45 Cm. In Poly Bags Of Size 20 Cm 10349 Supply And Stacking Of Plant Caesalpinia Pulcherrima Species Of Height 45-60 Cm. In Earthen Pot Of Size 20 Cm 1035 Bolts And Nuts Above 300 Mm In Length 10350 Supply And Stacking Of Plant Calliandra, Emarginata Of Height 45-60 Cm. In Earthen Pot Of Size 20 Cm 10351 Supply And Stacking Of Plant Calliandra Hybrida Of Height 75-90 Cm. With 4-5 Branches In Bag Of Size 25 Cm 10352 Supply And Stacking Of Plant Calliandra Hybrida Of Height 105-120 Cm., Well Branched, Bushy In Big Size Hdpe Bag 10353 Supply And Stacking Of Plant Cassia Biflora Of Height 45-60 Cm. In Earthen Pots Of Size 20 Cm 10354 Supply And Stacking Of Plant Cassia Biflora Of Height 60-75 Cm. With 4-5 Branches In Poly Bags Of Size 25 Cm 10355 Supply And Stacking Of Plant Cassia Biflora Of Height 90-105 Cm., Well Branched, Bushy In Big Size Hdpe Bag 10356 Supply And Stacking Of Plant Cassia Laevigata Of Height 45-60 Cm. In Earthen Pots Of Size 20 Cm 10357 Supply And Stacking Of Plant Cassia Laevigata Of Height 60-75 Cm. With 4-5 Branches In Bag Of Size 25 Cm 10358 Supply And Stacking Of Plant Cestrum Nocturnum ( Raat Ki Rani ) Of Height 60-75 Cm. With 4-5 Branches In Bag Of Size 25 Cm 10359 Supply And Stacking Of Plant Dombeya Mastersii Of Height 60-75 Cm. With 4-5 Branches In Bag Of Size 25 Cm 1036 Iron Pintels Including Weldded Pin 10360 Supply And Stacking Of Plant Euphorbia Caracasana ( Bronze Colour Leaves ) Of Height 60-75 Cm. With 2-3 Branches In Earthen Pots Of Size 20 Cm 10361 Supply And Stacking Of Plant Euphorbia Caracasana ( Bronze Colour Leaves ) Of Height 60-75 Cm. With 4-5 Branches In Bag Of Size 25 Cm 10362 Supply And Stacking Of Plant Euphorbia Caracasana ( Bronze Colour Leaves ) Of Height 90-105 Cm., Bushy In Big Size Hdpe Bag 10363 Supply And Stacking Of Plant Euphorbia Pulcherrima ( Dark Red Double Bracts ) Well Branched Of Height 60-75 Cm. In Earthen Pots Of Size 25 Cm 10364 Supply And Stacking Of Plant Euphorbia Pulcherrima ( Dark Red ) Well Branched ( Poinsettia Red Hegg ) Of Height 60-75 Cm. In Earthen Pots Of Size 25 Cm 10365 Supply And Stacking Of Plant Excoecaria Bicolor Of Height 45-60 Cm. In Earthen Pots Of Size 20 Cm Secure 10366 Supply And Stacking Of Plant Ficus Blackii ( F.Vivion ) Of Height 45-60 Cm. With 6-8 Branches Healthy Foliage In Earthen Pots Of Size 25 Cm 10367 Supply And Stacking Of Plant Ficus Blackii ( F.Vivion ) ( Bushy ) Of Height 150-165 Cm. With 8-10 Branches And Healthy Foliage In Earthen Pots Of Size 30 Cm 10368 Supply And Stacking Of Plant Ficus Blackii ( F.Vivion ) ( Bushy ) Of Height 150-165 Cm. With 8-10 Branches And Healthy Foliage In Earthen Pots Of Size 30 Cm 10369 Supply And Stacking Of Plant Ficus Panda Of Height 30-45 Cm. With 3-4 Branches And Healthy Foliage In P.Bag Of Size 20 Cm 10370 Supply And Stacking Of Plant Ficus Panda Of Height 45-60 Cm. With 6-7 Branches And Healthy Foliage In P.Bag Of Size 25 Cm 10371 Supply And Stacking Of Plant Ficus Panda Of Height 60-90 Cm, With 8-10 Branches, And Healthy Foliage, Bushy In Big Size Hdpe Bag 10372 Supply And Stacking Of Plant Ficus Panda Of Height 90-105 Cm. With 10- 12 Branches And Healthy Foliage, Well Formed In Cement Pots Of Size 30 Cm 10373 Supply And Stacking Of Plant Gardenia Jasminoides Of Height 45-60 Cm. With 3-4 Branches In Earthen Pots Of Size 20 Cm 10374 Supply And Stacking Of Plant Hamelia Patens Of Height 30-45 Cm. With 3- 4 Branches In Poly Bags Of Size 20 Cm 10375 Supply And Stacking Of Plant Hamelia Patens Of Height 60-75 Cm. With 6- 8 Branches In Poly Bags Of Size 25 Cm 10376 Supply And Stacking Of Plant Hamelia Patens Of Height 90-105 Cm. Bushy In Big Size Hdpe Bags As Per Direction Of The Officer-In-Charge 10377 Supply And Stacking Of Plant Hamelia Patens ( Dwarf ) Of Height 30-45 Cm. With 3-4 Branches In Earthen Pots Of Size 20 Cm 10378 Supply And Stacking Of Plant Hibiscus Rosasinensis Of Height 45-60 Cm. With 3-4 Branches In Earthen Pots Of Size 20 Cm 10379 Supply And Stacking Of Plant Hibiscus Rosasinensis Of Height 60-75 Cm. With 5-6 Branches In P.Bag Of Size 25 Cm 10380 Supply And Stacking Of Plant Hibiscus Rosasinensis Of Height 90-105 Cm., Bushy In Big Size Hdpe Bag 10381 Supply And Stacking Of Plant Hibiscus Variegated Of Height 45-60 Cm. With 3-4 Branches And Healthy Variegated Foliage In Earthen Pots Of Size 20 Cm 10382 Supply And Stacking Of Plant Hibiscus Variegated Of Height 60-75 Cm. With 8-10 Branches And Healthy Variegated Foliage In Cement Pots Of Size 35 Cm 10383 Supply And Stacking Of Plant Hibiscus Variegated Of Height 60-75 Cm. With Healthy Variegated Foliage In Earthen Pots Size 25 Cm 10384 Supply And Stacking Of Plant Jatropha Multifida ( Red Colour ) Of Height 45- 60 Cm. With 2-3 Branches In Earthen Pots Of Size 20 Cm 10385 Supply And Stacking Of Plant Jatropha Multifida ( Red Colour ) Of Height 60- 75 Cm. Multibranched In P.Bag Of Size 25 Cm 10386 Supply And Stacking Of Plant Largerstroemia Indica Of Height 90-105 Cm. Multibranched In Poly Bags Of Size 25 Cm 10387 Supply And Stacking Of Plant Largerstroemia Indica Of Height 45-60 Cm. In Polybag Of Size 20 Cm 10388 Supply And Stacking Of Plant Malpighia Coccigera Of Height 30-45 Cm., Multibranched In Earthen Pots Of Size 20 Cm 10389 Supply And Stacking Of Plant Murraya Exotica Of Height 45-60 Cm. In Poly Bags Of Size 15 Cm 10390 Supply And Stacking Of Plant Murraya Koenigii Spreng ( Kadipatta / Meetha Neem ) Of Ht 45-60 Cm Well Developed In Earthen Pots Of Size 20 Cm. 10391 Supply And Stacking Of Plant Mussaenda Erythrophylla ( Rosea ) Of Height 60-75 Cm. Multi Branched In Earthen Pots Of Size 25 Cm 10392 Supply And Stacking Of Plant Nerium Oleander ( Kaner ) Of Height 45-60 Cm. With 3-4 Branches In Poly Bags Of Size 20 Cm 10393 Supply And Stacking Of Plant Nerium Oleander ( Kaner ) Of Height 60-75 Cm. With 5-6 Branches In Poly Bags Of Size 25 Cm 10394 Supply And Stacking Of Plant Nerium Oleander ( Kaner ) Dwarf Of Height 30-40 Cm. In Earthen Pot Of Size 20 Cm 10395 Supply And Stacking Of Plant Nerium Oleander Variegated Of Height 45- 60 Cm. In Earthen Pots Of Size 20 Cm 10396 Supply And Stacking Of Plant Nerium Oleander Variegated Of Height 60- 75 Cm., Multibranched In Earthen Pots Of Size 25 Cm 10397 Supply And Stacking Of Plant Nyctanthes Arbor-Tristis ( Hasingar ) Of Ht. 90- 105 Cm In Earthen Pots Of Size 20 Cm Secure 10398 Supply And Stacking Of Plant Plumbego Capensis Well Developed With Fresh And Healthy 30 To 45 Cm Ht., With Bloom In 20 Cm Earthen Pot / Plastic Pot 10399 Supply And Stacking Of Plant Putranjiva Roxburghii Of Ht. 45-60 Cm In Bag Of Size 15 Cm 10400 Supply And Stacking Of Plant Putranjiva Roxburghii Of Ht. 60-75 Cm In Bag Of Size 20 Cm 10401 Supply And Stacking Of Plant Tabernaemontana Coronaria ( Chandni Single ) Of Height 45-60 Cm. In Earthen Pots Of Size 20 Cm 10402 Supply And Stacking Of Plant Tabernaemontana Coronaria ( Chandni Single ) Of Height 75-90 Cm. With 5-6 Branches In Bag Of Size 25 Cm 10403 Supply And Stacking Of Plant Tabernaemontana Coronaria ( Chandni Single ) Of Height 90-105 Cm., Bushy In Big Size Hdpe Bag 10404 Supply And Stacking Of Plant Tabernaemontana Coronaria ( Chandni Variegated ) Of Height 45-60 Cm. With 3-4 Branches Earthen Pots Of Size 20 Cm 10405 Supply And Stacking Of Plant Tabernaemontana Coronaria ( Chandni Single ) Variegated Of Height 60-75 Cm., 5-6 Branches In P.Bags Of Size 25 Cm 10406 Supply And Stacking Of Plant Tabernaemontana Coronaria ( Chandni Single ) Veriegated Of Height 105-120 Cm., Multibranched, Bushy In Big Size Hdpe Bag 10407 Supply And Stacking Of Plant Tabernaemontana Divaricata ( Chandni Double ) Of Height 45-60 Cm. In Earthen Pots Of Size 20 Cm 10408 Supply And Stacking Of Plant Tabernaemontana Divaricata ( Chandni Double ) Of Height 75-90 Cm. With 4-5 Branches In Bag Of Size 25 Cm 10409 Supply And Stacking Of Plant Tabernaemontana Divaricata ( Chandni Double ) Of Height 90-105 Cm., Bushy In Big Size Hdpe Bag 10410 Supply And Stacking Of Plant Tecoma Gaudichaudi Of Height 45-60 Cm. In Earthen Pots Of Size 20 Cm 10411 Supply And Stacking Of Plant Tecoma Gaudichaudi Of Height 60-75 Cm. With 5-6 Branches In P.Bag Of Size 25 Cm 10412 Supply And Stacking Of Plant Tecoma Gaudichaudi Of Height 90-105 Cm., Bushy In Big Size Hdpe Bage 10413 Supply And Stacking Of Plant Tecoma Stans Of Height 45-60 Cm. Branched In Earthen Pots Of Size 20 Cm 10414 Supply And Stacking Of Plant Tecoma Stans Of Height 60-75 Cm. Branched In Earthen Pots Of Size 20 Cm 10415 Supply And Stacking Of Plant Tecoma Stans Of Height 90-105 Cm. Bushy In Big Size Hdpe Bag 10416 Supply And Stacking Of Plant Thevetia Nerifolia Of Height 30-45 Cm. With 3-4 Branches In Poly Bags Of Size 20 Cm 10417 Supply And Stacking Of Plant Thevetia Nerifolia Of Height 60-75 Cm. With 5-6 Branches In Poly Bags Of Size 25 Cm 10418 Supply And Stacking Of Plant Thuja Compacta Of Height 45-60 Cm., Well Branched In Earthen Pots Of Size 25 Cm 10419 Supply And Stacking Of Plant Thuja Compacta Of Height 75-90 Cm., Conical Shaped, Well Formed With Healthy Foliage In Earthen Pots Of Size 30 Cm 10420 Allamanda Cathartica Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10421 Allamanda Violacea Plant Of Height 30 Cm To 45 Cm. In Poly Bag Of Size 20 Cm 10422 Bignonia Venusta ( Golden Shower ) Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10423 Bougainvillea ( Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra, Thimma, Spectabilis L.N Birla, Refulgens ) Plant Of Height 30 Cm. To 45 Cm. With 2-3 Branches In 20 Cm Size Of Earthen Pots / Plastic Pots. 10424 Clerodendrum Splendens Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10425 Clerodendrum Thompsonae Plant Of Height 30 Cm.To 45 Cm. In 30 Cm To 45 Cm. In 20 Cm Size Of Poly Bag & As Per Direction Of The Officer-Incharge 10426 Ipomea Purpurea ( Morning Glory ) Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10427 Jasminum Grandiflorum ( Chameli ) Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots. 10428 Jasminum Humile ( Yellow ) Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots Secure 10429 Passiflora Caerulea ( Rakhi Bel ) Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10430 Petrea Volubilis Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10431 Quisqualis Indica Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10432 Tecoma Grandiflora Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10433 Vernonia Elaegnifolia ( Curtain Creeper ) Plant Of Height 30 Cm To 45 Cm. In 20 Cm Size Of Earthen Pots / Plastic Pots 10434 Alyssum 10435 Antirrhinum Dwarf 10436 Aster Dwarf 10437 Brachycome 10438 Calendula Double 10439 Carnation ( Double ) Dutch 10440 Carnation ( Double ) Lilyput 10441 Carnation Hybrid 10442 Chrysanthemum Double 10443 Cineraria 10444 Cineraria Dwarf Hybrid 10445 Clarkia Hybrid 10446 Cosmos Hybrid 10447 Dahlia Double 10448 Daisy Hybrid 10449 Dianthus Hybrid 10450 Gazania Hybrid 10451 Gerbera Hybrid Double 10452 Lupin Hybrid 10453 Marigold French Hybrid Dwarf 10454 Marigold Inca Hybrid 10455 Nasturtium 10456 Nemesia Hybrid 10457 Pansy Hybrid 10458 Petunia Hybrid 10459 Phlox Mix Colour Hybrid 10460 Poppy Double 10461 Salvia 10462 Salvia Hybrid Different Colour 10463 Stock Double 10464 Verbena Hybrid 10465 Balsum Seedling 10466 Celosia Argentea & Celosia Cristata Hybrid 10467 Cosmos Hybrid 10468 Gaillardia Double 10469 Gomphrena 10470 Kochia 10471 Portulaca Hybrid 10472 Sunflower Dwarf 10473 Vinca Hybrid 10474 Zinnia Hybrid 1143 Steel Beading Siz 10 X 10X 106 Mm ( Box Type ) 1145 Aluminium Plain Strip Edging 38X12x3 Mm 1149 Glass Strip 4 Mm Thick 40 Mm Deep 1151 Boundary Stone Top Chisel Dressed 15X15x90 Cm 1154 Through And Bond Stone Size 24 X 24 X 39Cm 1157 Stone For Masonry Work 1158 Stone For Pitching 15 Cm X 22.5 Cm 1159 Stone Dust Secure 1160 Red Sand Stone Block 1161 White Sand Stone Block 1163 White Sand Stone Slab 75 Mm Thick ( Un- Dressed ) 1164 Red Sand Stone Slab 40 Mm Thick ( Un-Dressed ) 1165 White Sand Stone Slab 40 Mm Thick ( Un-Dressed ) 1166 Red Sand Stone Slab 30 Mm Thick ( Un-Dressed ) 1168 Kota Stone Slab 20 Mm To 25 Mm Thick ( Semi-Polished ) 1169 Kota Stone Slab 25 Mm Thick ( Rough Chiseled ) 1174 Red Sand Stone Slab 45 Mm To 50 Mm Thick ( Un-Dressed ) 1175 White Sand Stone Slab 45 Mm To 50 Mm Thick ( Un-Dressed ) 1177 Stone Grit 6 Mm And Down Size Or Pea Sized Gravel 1179 Crushed Stone 2.36 Mm To 12.5 Mm Size 1182 Surkhi 1186 Superior Class Teak Wood Such As Dandeli, Balarshah Or Malabar In Planks 1187 First Class Teak Wood In Scantling 1188 First Class Teak Wook In Planks 1189 Second Class Teak Wood In Scantling 1190 Second Class Teak Wood In Planks 1194 Second Class Deodar Wood In Planks 1196 First Class Kail Wood In Planks 1197 Second Class Kail Wood In Scantling 1198 Second Class Kail Wood In Planks 1199 Sal Wood In Scantling 1200 Klin Seasoned Selected Sheesham Wood Planks 1201 Precast Terrazzo Tiles 22 Mm Thick ( Light Shade ) 1202 Precast Terrazzo Tiles 22 Mm Thick ( Medium Shade ) 1203 Precast Terrazzo Tiles 22 Mm Thick ( Dark Shade ) 1204 Precast Heat Resistant Terrance Tiles ( Size 300X300 Mm ) And 20 Mm Thick 1207 G.I Limpet Washer 1208 Bitumen Washer 1209 G.I. Plain Washer Thick 1210 G.I. Plain Washer Thin 1211 G.I. Plain Washer For Seam Bolts 1213 Water Proofing Materials 1214 Welding By Gas Plant 1215 Welding By Electric Plant 1216 Whiting 1219 Wire Nails 1220 Wire Mesh ( Rabbit ) 1221 20 Mm Dia Holding Down Bolts 1222 Mild Steel Sheets With Bolts And Nuts To Rest On Pintels 1224 Hard Drawn Steel Wire 1225 Mild Steel Flat Strap Fitting 1227 Chequered Terrazzo Tiles 22 Mm Thick ( Light Shade ) 1228 Chequered Terrazzo Tiles 22 Mm Thick ( Medium Shade ) 1229 Chequered Terrazzo Tiles 22 Mm Thick ( Dark Shade ) 1231 Extra For Selected Planks Of Second Class Teakwood 1234 Aluminium Plain Strip Edging 57X12x3 Mm 1235 Diesel Oil 1237 Cutting Marble Or Sand Stone Slab Up To 50 Mm Thick By Mechanical Device 1238 Extra For Selected Planks Of First Class Teakwood 1239 18 Mm Thick Flamed Finish Granite Stone Slab 1240 18 Mm Thick Italian Marble Stone Slab. Perlato ( Slab Area Up To 0.5 Sqm ) 1241 Commercial Lpg In Cylinder 1242 Glass Mossaic Tiles ( 20 Mm X 20 Mmx 4 Mm ) . 1243 Tile Fixing Chemical Adhesive Secure 1244 Cement Polymer Grout Compound 1245 Acid For Cleaning Tiles 1246 Silicon Based Joint Sealeant For Tiles 1247 Rubber Base Adhesive 1248 Epoxy Based Sealing Compound 1249 Acrylic Based Sealing Compound 1250 Non Woven Reinforcement Tape 1301 Bleaching Powder 1304 Surface Box For Stop Cock 1305 Surface Box For Sluice Valve 1307 Surface Box For Water Meter 1309 C.I. Bracket For Wash Basin And Sinks 1313 8 Mm Dia C.P. Brass / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate For European Type W.C. 1314 C.P. Brass Chain With 32 Mm Dia Rubber Plug 1315 C.P.Brass Chain With 40 Mm Dia Rubber Plug 1330 Clamps And M.S. Stays Including Bolts And Nuts For 100 Mm Pipe 1331 M.S. Holder Bat Clamp Of Approved Design For 100 Mm S.C.I Pipe 1332 M.S. Holder Bat Clamp Of Approved Design For 75 Mm S.C.I. Pipe 1334 Clamps And M.S. Stays Including Bolts And Nuts For 50 Mm Pipe 1335 Clamps And M.S.Stays Including Bolts And Nuts For 75 Mm Pipe 1336 Clearing Eye With Chain And Lid 100 Mm Dia 1337 Clearing Eye With Chain And Lid 150 Mm Dia 1339 Brass Bib-Cock-15 Mm Dia 1340 Brass Bib-Cock 20 Mm Dia 1342 Brass Stop-Cock 15 Mm Dia 1343 Brass Stop-Cock 20 Mm Dia 1350 Mosquito Proof Coupling Of Approved Design 1352 C.I. Cover And Frame 300X300 Mm Inside 1353 C.I. Cover Without Frame 300X300 Mm Inside 1354 Rectangular Cover 455X610 Mm With Frame ( Low Duty ) 1355 Rectangular Cover 455X610 Mm With Frame ( Low Duty ) 1356 500 Mm Dia Cover With Frame ( Medium Duty ) 1357 500 Mm Dia Cover Without Frame ( Medium Duty ) 1360 C.I.Mouth, Brass Ferrule 15 Mm Dia 1361 C.I.Mouth, Brass Ferrule 20 Mm Dia 1362 C.I.Mouth, Brass Ferrule 25 Mm Dia 1363 Vitreous China Foot Rests 250X130x30 Mm 1364 C.I. Grating 100X100 Mm 1366 C.I. Grating 150X150 Mm 1367 C.I. Grating 180X180 Mm 1369 S.C.I. Gully Or Nahani Grating 100 Mm Dia 1373 Rubber Insertions For 80 Mm Dia Pipe Joints 1374 Rubber Insertions For 100 Mm Dia Pipe Joints 1375 Rubber Insertions For 125 Mm Dia Pip Joints 1376 Rubber Insertions For 150 Mm Dia Pipe Joints 1377 Rubber Insertions For 200 Mm Dia Pipe Joints 1378 Rubber Insertions For 250 Mm Dia Pipe Joints 1379 Rubber Insertions For 300 Mm Dia Pipe Joints 1380 Rubber Insertions For 350 Mm Dia Pipe Joints 1381 Rubber Insertions For 400 Mm Dia Pipe Joints 1382 Rubber Insertions For 450 Mm Dia Pipe Joints 1383 Rubber Insertions For 500 Mm Dia Pipe Joints 1384 Rubber Insertions For 600 Mm Dia Pipe Joints 1392 Mirror Of Superior Make Glass 60X45 Cm 1396 Vitreous China Pedestal For Wash Basin 1397 Pig Lead Secure 1410 Supply And Stacking Of Plant Tecoma Gaudichaudi Of Height 45-60 Cm. In Earthen Pots Of Size 20 Cm 1464 S &S.C.I. Standard Specials Up To 300 Mm Dia ( Heavy Class ) 1466 S&S.C.I.Standard Specials Over 300 Mm Dia ( Heavy Class ) 1468 Flanged C.I. Standard Specials Up To 300 Mm Dia ( Heavy Class ) 1470 Flanged C.I. Standard Specials Over 300 Mm Dia ( Heavy Class ) 1472 Casing Pipe 100 Mm Dia 1532 Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Single Stall 1533 Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Double Stall 1534 Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Range Of Three Stall 1535 Flush Pipe With Union Spreaders And Clamps All In C.P. Brass For Range Of Four Stall 1540 Flush Pipe And Spreaders G.I. For Single Set Of One Squatting Plate Urinal 1541 Flush Pipe And Spreaders G.I. For Range Of Two Squatting Plates Urinal 1542 Flush Pipe And Spreaders G.I. For Range Of Three Squatting Plates Urinal 1543 Flush Pipe And Spreaders G.I. For Range Of Four Squatting Plates Urinal 1545 G.I. Pipes 15 Mm Dia 1546 G.I. Pipes 20 Mm Dia 1547 G.I. Pipes 25 Mm Dia 1548 G.I. Pipes 32 Mm Dia 1549 G.I. Pipes 40 Mm Dia 1550 G.I Pipes 50 Mm Dia 1551 G.I. Pipes 65 Mm Dia 1552 G.I. Pipes 80 Mm Dia 1555 G.I. Back ( Jam ) Nuts 25 Mm Dia 1559 G.I.Back ( Jam ) Nuts 65 Mm Dia 1608 G.I.Tees ( Equal ) 25 Mm 1612 G.I. Tees ( Equal ) 65 Mm 1614 G.I. Inlet Connection 1616 S.C.I. Soil, Waste And Vent Single Socketed Pipe 1.80 Metres Long: 75Mm Dia 1617 S.C.I. Soil, Waste And Vent Single Socketed Pipe 1.80 Metres Long:100Mm Dia 1618 S.C.I. Soil, Waste And Vent Single Socketed Pipe 1.80 Metres Long: 150Mm Dia 1620 S.C.I. Plain Bend 75 Mm Dia 1621 S.C.I. Plain Bend 100 Mm Dia 1622 S.C.I. Plain Bend 150 Mm Dia 1624 S.C.I. Bend With Access Door 75 Mm Dia 1625 S.C.I. Bend With Access Door 100 Mm Dia 1627 S.C.I. Plain Single Equal Junctions 75X75x75 Mm Dia 1628 S.C.I. Plainsingle Equal Junctions 100X100x100 Mm Dia 1630 S.C.I. Single Equal Junctions75x75x75mm Dia With Access Door 1631 S.C.I. Single Equal Junctions 100X100x100 Mm Dia With Access Door 1633 S.C.I. Plain Double Equal Junctions 75X75x75x75mm Dia 1634 S.C.I. Plain Double Equal Junctions 100X100x100x100 Mm Dia 1636 S.C.I.Double Equal Junctions 75X75x75x75 Mm Dia With Access Door 1637 S.C.I.Double Equal Junctions 100X100x100x100 Mm Dia With Access Door 1639 Slotted Cowl ( Terminal Guard ) 75 Mm Dia 1640 Slotted Cowl ( Terminal Guard ) 100 Mm Dia 1641 G.I. Union 15 Mm Nominal Bore 1642 G.I. Union 20 Mm Nominal Bore 1643 G.I. Union 25 Mm Nominal Bore 1644 G.I. Union 32 Mm Nominal Bore 1645 G.I. Union 40 Mm Nominal Bore 1646 G.I. Union 50 Mm Nominal Bore 1647 G.I. Union 65 Mm Nominal Bore Secure 1648 G.I. Union 80 Mm Nominal Bore 1649 Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet 1653 Sand Cast Iron S & S Single Unequal Junctions: 100X100x75x75 Mm Dia 1656 Sand Cast Iron S&S Single Unequal Junction: 100X100x75 Mm Dia With Access Dor 1659 Sand Cast Iron S&S Plain Double Unequal Junction: 100X100x75x75 Mm Dia 1662 Sand Cast Iron S&S Double Unequal Junction: 100X100x75x75xmm Dia With Access Door 1666 Sand Cast Iron Heel Rest Bend 75 Mm Dia 1667 Sand Cast Iron Heel Rest Bend 100 Mm Dia 1669 S.C.I. Single Equal Invert Branch Of Required Degree75x75x75x75 Mm Dia 1670 S.C.I. Single Equal Invert Branch Of Required Degree 100X100x100 Mm Dia 1672 S.C.I. Double Equal Invert Branch Of Required Degree 75X75x75x75 Mm Dia 1673 S.C.I. Double Equal Invert Branch Of Required Degree 100X100x100x100 Mm Dia 1674 S.C.I. Single Unequal Invert Branch Of Required Degree 100X100x75 Mm Dia 1677 S.C.I. Double Unequal Invert Branch Of Required Degree 100X100x75x75 Mm Dia 1682 S.C.I. Door Pieces 75 Mm Dia 1683 S.C.I.Door Pieces 100 Mm Dia 1685 S.C.I. Collar 75 Mm Dia 1686 S.C.I. Collar 100 Mm Dia 1687 Unplasticised P.V.C. Connection Pipe With Brass Union 30 Cm Long 15 Mm Bore 1688 Unplasticised P.V.C. Connection Pipe With Brass Union 30 Cm Long 20 Mm Bore 1689 Unplasticised P.V.C. Connection Pipe With Brass Union 45 Cm Long 15 Mm Bore 1690 Unplasticiesd P.V.C. Connection Pipe With Brass Union 45 Cm Long 20 Mm Bore 1693 S.C.I Hand Pump 1700 R.C.C. Pipes Np2 Class 100 Mm Dia 1701 R.C.C.Pipes Np2 Class 150 Mm Dia 1702 R.C.C. Pipes Np2 Class 250 Mm Dia 1703 R.C.C. Pipes Np2 Class 300 Mm Dia 1704 R.C.C. Pipes Np2 Class 450 Mm Dia 1705 R.C.C. Pipes Np2 Class 500 Mm Dia 1706 R.C.C. Pipes Np2 Class 600 Mm Dia 1707 R.C.C. Pipes Np2 Class 700 Mm Dia 1709 R.C.C. Pipes Np2 Class 800 Mm Dia 1710 R.C.C. Pipes Np2 Class 900 Mm Dia 1711 R.C.C. Pipes Np2 Class 1000 Mm Dia 1712 R.C.C. Pipes Np2 Class 1100 Mm Dia 1713 R.C.C. Pipes Np2 Class 1200 Mm Dia 1714 R.C.C. Collars Np2 Class 100 Mm Dia 1715 R.C.C. Collars Np2 Class 150 Mm Dia 1716 R.C.C. Collars Np2 Class 250 Mm Dia 1717 R.C.C. Collars Np2 Class 300 Mm Dia 1718 R.C.C. Collars Np2 Class 450 Mm Dia 1719 R.C.C. Collars Np2 Class 500 Mm Dia 1720 R.C.C. Collars Np2 Class 600 Mm Dia 1721 R.C.C. Collars Np2 Class 700 Mm Dia 1723 R.C.C. Colllars Np2 Class 800 Mm Dia 1724 R.C.C. Collars Np2 Class 900 Mm Dia 1725 R.C.C. Collars Np2 Class 1000 Mm Dia 1726 R.C.C. Collars Np2 Class 1100Mm Dia 1727 R.C.C. Collars Np2 Class 1200 Mm Dia Secure 1728 Rcc Pipe 450 Mm Dia Np -3 Spigot 1729 Rcc Pipe 600 Mm Dia Np- 3 Spigot 1730 Rcc Pipe 900 Mm Dia Np - 3 Spigot 1731 Rcc Pipe 1000 Mm Dia Np -3 Spigot 1732 Rcc Pipe 1200 Mm Dia Np - 3 Spigot 1733 Rcc Pipe 1800 Mm Dia Np- 3 Spigot 1734 Rcc Pipe 450 Mm Dia Np- 4 Spigot 1735 Rcc Pipe 600 Mm Dia Np- 4 Spigot 1736 Rcc Pipe 900 Mm Dia Np- 4 Spigot 1737 Rcc Pipe 1000 Mm Dia Np- 4 Spigot 1738 Rcc Pipe 1200 Mm Dia Np- 4 Spigot 1739 Rcc Pipe 1800 Mm Dia Np- 4 Spigot 1854 Stoneware Pipes Grade A ( 60 Cm Long ) 100 Mm Dia 1855 Stoneware Pipes Grade A ( 60 Cm Long ) 150 Mm Dia 1856 Stoneware Pipes Grade A ( 60 Cm Long ) 200 Mm Dia 1857 Stoneware Pipes Grade A ( 60 Cm Long ) 230 Mm Dia 1858 Stoneware Pipes Grade A ( 60 Cm Long ) 250 Mm Dia 1859 Stoneware Pipes Grade A ( 60 Cm Long ) 300 Mm Dia 1863 Fire Clay Kitchen Sink: 600X450x250 Mm 1871 White Vitreous China Laboratory Sink 450X300x150x Mm 1872 White Vitreous China Laboratory Sink 600X450x200 Mm 1875 White Plastic Seat ( Solid ) With Lid C.P. Brass Hinges And Rubber Buffers 1876 Black Plastic Seat ( Soild ) With Lid C.P.Brass Hinges And Rubber Buffers 1878 Shower Rose C.P Brass For 15 To 20 Mm Intel 100 Mm Dia 1879 Shower Rose C.P.Brass For 15 To 20 Mm Intel 150 Mm Dia 1880 Dismenteled P Or S Trap Scrap ( Approx Wt 2Kg ) 1881 Spun Yarn 1882 Strainer Brass 40 Mm Dia 1.5 Metre Long 1885 15 Mm C.P.Brass Tap 1889 C.P.Brass Toilet Paper Holder Of Standard Size 1890 Centrifugally Sci ( Spun ) S & S P Or S Trap 1891 C.I. Trap For Standard Urinal With Vent Arm With Operating And Other Couplings In C.P. Brass: 50 Mm Dia 1893 C.I. Trap For Standard Urinal With Vent Arm With Operating And Other Coupling In C.P. Brass: 80 Mm Dia 1895 C.P. Brass Trap 40 Mm Dia 1896 100 Mm S.C.I. Trap With Vent Heel 1897 100 Mm S.C.I. Trap With 100 Mm Inlet And 100 Mm Outlet 1898 100 Mm S.C.I. Trap With 100 Mm Inlet And 75 Mm Outlet 1900 S.W. Gully Trap Type 100X100 Mm 1902 S.W. Gully Trap Type 150X100 Mm 1904 S.W. Gully Trap P Type 180X150 Mm 1913 Vitreous China Lipped Front Urinal 1915 Vitreous China Squatting Plate Urinal 1922 H.P. Or L.P. Ball Valve With Polythene Floats: 15 Mm Dia 1923 H.P. Or L.P. Ball Valve With Polythene Floats: 20 Mm Dia 1924 H.P. Or L.P. Ball Valve With Polythene Floats: 25 Mm Dia 1926 20 Mm Dia Gunmetal Gate Valve With Wheel 1927 Brass Full Way Valve With C.I. Wheel ( Screwed End ) 25 Mm Dia 1928 Brass Full Way Valve With C.I. Wheel ( Screwed End ) 32 Mm Dia 1929 Brass Full Way Valve With C.I. Wheel ( Screwed End ) 40 Mm Dia 1930 Brass Full Way Valve With C.I. Wheel ( Screwed End ) 50 Mm Dia 1931 Brass Full Way Valve With C.I. Wheel ( Screwed End ) 65 Mm Dia 1932 Brass Full Way Valve With C.I. Wheel ( Screwed End ) 80 Mm Dia 1933 Gunmetal Non-Return Valve-Horizontal ( Screwed End ) 25 Mm Dia 1934 Gunmetal Non-Return Valve-Horizontal ( Screwed End ) 32 Mm Dia 1935 Gunmetal Non-Return Valve-Horizontal ( Screwed End ) 40 Mm Dia 1936 Gunmetal Non-Return Valve-Horizontal ( Screwed End ) 50 Mm Dia Secure 1937 Gunmetal Non-Return Valve-Horizontal ( Screwed End ) 65 Mm Dia 1938 Gunmetal Non-Return Valve-Horizontal ( Screwed End ) 80 Mm Dia 1940 C.I.Sluice Valve ( With Caps ) Class I : 100 Mm Dia 1941 C.I.Sluice Valve ( With Caps ) Class I : 125 Mm Dia 1942 C.I.Sluice Valve ( With Caps ) Class I : 150 Mm Dia 1943 C.I.Sluice Valve ( With Caps ) Class I : 200 Mm Dia 1944 C.I.Sluice Valve ( With Caps ) Class I : 250 Mm Dia 1945 C.I.Sluice Valve ( With Caps ) Class : 300 Mm Dia 1947 Vitreous China Flat Back Wash Basin 630X450 Mm 1949 Vitreous China Angle Back Wash Basin 600X480 Mm 1950 Vitreous China Angle Back Wash Basin 400X400 Mm 1951 C.P. Brass Waste 32 Mm 1952 C.P. Brass Waste 40 Mm 1953 Vitreous China India Type W.C. Pan Size 580 Mm 1954 Vitreous China Orrisa Type W.C. Pan Size 580 Mm 1955 Vitreous China Pedestal Type Wate Closet 1956 Bolts And Nuts 16 Mm Dia 60 Mm Long 1957 Bolts And Nuts 16 Mm Dia 65 Mm Long 1958 Bolts And Nuts 20 Mm Dia 65 Mm Long 1959 Bolts And Nuts 20 Mm Dia 70 Mm Long 1960 Bolts And Nuts 20 Mm Dia 75 Mm Long 1961 Bolts And Nuts 20 Mm Dia 80 Mm Long 1962 Bolts And Nuts 24 Mm Dia 85 Mm Long 1963 Bolts And Nuts 24 Mm Dia 90 Mm Long 1964 Bolts And Nuts 27 Mm Dia 100 Mm Long 1965 White Vitreous China Dual Purpose Closet ( Anglo Indian W.C. ) Suitable Use As Squatting Pan Or European Type Water Closet As Per Manufactures Specifications 1966 Floor Mounted White Vitrous China Double Trap Syphonic Wc With 10 Litre Cistern And All Fittings, Seat Cover Etc 1970 Vitreous China Foot Rests 250X125x25 Mm 1980 Fly Ash 1984 Common Burnt Clay F.P.S. ( Non Modular ) Bricks Tile Class Designation 1986 Common Burnt Clay Modular Bricks Class Designation 12.5 2391 Strips-Aluminium Fluted 3.15 Mm Thick And 150 Mm Wide 2392 Strips-Aluminium Fluted 3.15 Mm Thick And 200 Mm Wide 2393 1 Mm Thick Sstainless Steel Cover Plate Grade 304 2394 Coupler 16 Mm Dia 2395 Coupler 20 Mm Dia 2396 Coupler 25 Mm Dia 2397 Coupler 28 Mm Dia 2398 Coupler 32 Mm Dia 2399 Complete Roof Joint Of 100 Mm 2400 Complete Roof Joint Of 150 Mm 2401 Complete Roof Joint Of 200 Mm 2402 Epoxy Adhesive 2403 Floor Joint Of 100 Mm 2404 Floor Joint Of 150 Mm 2405 Floor Joint Of 200 Mm 2406 Float Glass Sheet Of Nominal Thickness 4 Mm ( Weight Not Less Than 10 Kg / Sqm ) 2407 Float Glass Sheet Of Nominla Thickness 5.5 Mm ( Weight Not Less Than 13.50 Kg / Sqm ) 2408 Float Glass Sheet Of Nominal Thickness 8 Mm ( Weight Not Less Than 20.00 Kg / Sqm ) 2409 Wall Joint Of 100 Mm 2410 Wall Joint Of 150 Mm 2411 Wall Joint Of 200 Mm 2412 Play Wood 5 Play With Commericila Ply On Both Faces 6 Mm Thick 2413 12 Mm Commercial Ply Secure 2414 18 Mm Thick Block Board With Commercial Ply Veneering On Both Side 2415 21 Mm Thick Clear Toughened Laminated Glass For Fins With Holes 2447 Hollock Ballies 125 Mm Diameter 2449 Oxidised Mild Steel Pull Bolt Lock ( Locking Bolt ) Of Size 85 Mm X 42 Mm With Screws, Bolts, Nuts And Washers Complete 2451 Brass Cupboard Lock 6 Levers Of Approved Quality, 40 Mm Size 2452 Brass Upboard Lock 6 Levers Of Approved Quality, 50 Mm Size 2453 Brass Cupboard Lock 6 Levers Of Approved Quality, 65 Mm Size 2454 Brass Cupboard Lock 6 Levers Of Approved Quality, 75 Mm Size 2455 Brass Hanging Type Door Stopper 150 Mm 2456 Hydraulic Door Closer Bottle Type M.S. Body With Necessary Accessories And Screw Complete 2459 Anodised Aluminium Hanging Type Door Stopper 2464 Anodised Aluminium Pull Bolt Lock ( Locking Bolt ) Of Size 85 Mmx42 Mm Wutg Screws, Bolts, Nuts And Washers Complete 2465 Anodised Aluminium Casement Stay 250 Mm 2466 Hollock Wood In Scantling 2467 Chromium Plated Brass Pull Bolt Lock ( Locking Bolt ) Of Size 85 Mmx42 Mm With Screws, Bolts, Nuts And Washers Complete 2468 Nickeled Chromium Brass Cupboard Lock 40 Mm Size 2469 Nickeled Chromium Brass Cupboard Lock 50 Mm Size 2470 Nickeled Chromium Brass Cupboard Lock 65 Mm Size 2471 Nickeled Chromium Brass Cupboard Lock 75 Mm Size 2480 Ply Wood 5 Ply With Teak Ply On Both Faces 9 Mm Thick 2481 Ply Wood 5 Ply With Teak Ply On One Faces And Commercial Ply On Another Face 9 Mm Thick 2483 Ply Wood 75 Ply With Teak Ply On One Face And Commercial Ply On Another Face 9 Mm Thick 2484 Pre- Laminated With Decorative Lamination On Both Side Exterior Grade - I Mdf Board 12 Mm Thick Confirming To Is:14587 2485 Pre - Laminated With Decorative Lamination On Both Side Exterior Grade - I Mdf Board 18 Mm Thick Confiriming To Is:14587 2486 Pre- Laminated With Decorative Lamination Side And Other Side Balancing Lamination Exterior Grade - I Mdf Board 25 Mm Thick Confirming To Is: 14587 2487 Pre- Laminated With Decorative Lamination Side And Other Side Balancing Lamination Exterior Grade - I Mdf Board 12 Mm Thick Confirming To Is:14587 2488 Pre-Laminated With Decorative Lamination One Side And Other Side Balancing Lamination Exterior Grade- I Mdf Board 18 Mm Thick Confirming To Is:14587 2489 Pvc Edge Bending Tape 2.00 Mm Thick 2491 Pre Laminated Both Side Solid Foam Upvc Profile ( 45X20mm ) 2492 Solid Foam Upvc Sheet 20Mm Thick Prelaminated On Both Side 2493 Pvc Edge Beading 2494 Expandable Fastner With Plastic Sleeve 2500 Extra For Selectd Planks Of Second Class Deodar Wood 2504 Kiln Seasoning Of Timber 2505 Hollock Wood In Planks 2506 Carben Steel Galvanised Dash Fastner ( Min 5 Micron ) Of 10 Mm Dia Double Threaded 608 Grade Counter Sunk Head Screw Comprising Of 10 Mm Dia Polyamide Pa 6 Grade Sleave. Size 10 Mm X 60 Mm 2507 Carben Steel Galvanised Dash Fastner ( Min 5 Micron ) Of 10 Mm Dia Double Threaded 6.8 Grade Counter Sunk Head Screw Comprising Of 10 Mm Dia Polyamide Pa 6 Grade Sleave. Size 10 Mm X Mm 2508 Carben Steel Galvanised Dash Fastner ( Min 5 Micron ) Of 10 Mm Dia Double Threaded 6.8 Grade Counter Sunk Head Screw Comprising Of 10 Mm Dia Polyamide Pa 6 Grade Sleave. Size 10 Mm X 120 Mm 2509 Carben Steel Galvanised Dash Fastner ( Min 5 Micron ) Of 10 Mm Dia Double Threaded 6.8 Grade Sleave, Size 10 Mm X 140 Mm 2510 Carben Steel Galvanised Dash Fastner ( Min 5 Micron ) Of 10 Mm Dia Double Threaded 6.8 Grade Counter Sunk Head Screw Comprising Of 10 Mm Dia Polyamide Pa 6 Grade Sleave. Size 10 Mm X 160 Mm 2602 Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 7.5 2603 Common Burnt Clay F.P.S. ( Non Modular ) Bricks Class Designation 5.00 Secure 2604 Weather / Structural Non Sage Elastomeric Pu Sealant ( 600Ml Sausage ) For Joints In Rcc / Brick / Stone / Wood / Ceramic / Gypsum / Alluminium Work Complying To Astm C920, Din 18540- F & Iso 11600 Incl All Taxes 2605 Structural Sealant- 6Mm X12 Mm 2606 Spacer Tape 6.4 Mm Thick X 6 Mm Wide 2607 Weather Sealant - Non Staining ( 600 Ml ) 2608 Weather Sealant - Normal ( 300 Ml ) 2609 Ms Brackets / Aluminium Alloy Brackets 2610 Silicon Gasket In Kg ( Above 50 G / M ) 2611 Epdm Gasket In Kg ( Above 60 G / M ) 2612 Anchor Fastner - M10 2613 Ss Bolt With Washer Of Sizes For Structural Glazing / Acp Cladding 2614 Ss Screws Of Sizes For Structural Glazing / Acp Cladding 2615 Protective Tape 2616 Gi Flashing - 1.2 Mm Thick 2617 6 Mm Thick High Performance Glass 2618 6 Mm Thick Clear Heat Strengthened Glass 2619 6 Mm Thick Clear Heat Strengthened Glass 2620 Arms Gs Hd - Top Hung -20 2621 Connective Block 2622 Curtain Wall Striker 2623 Adjustable Fastening Pawl 2624 Corner Drive 2625 Top Wedge Block 2626 Glass Wool Density 48 Kg / M3 With Block Glass Tissue ( Bgt ) 2627 Ss Screws - #8X19 2628 Weather Sealant - Dc 789 2629 Cement Board 2630 Baker Rod 2631 4 Mm Thick Acp 2632 Fire Stop 2634 Gi / Aluminium Sheet ( 0.8 Mm Thick ) 2635 Gi Screws Of Guage 10, Length 25 Mm For Fixing Cement Fibre Board To C Section 2636 Gi Screws Of Guage 10, Length 45 Mm For Fixing Cement Fibre Board To C Section 2637 Vapour Barrier 2640 Clear Toughned Interlayed, Non-Wired Fire Resistant Glass Panes Of Minimum 11 Mm Thickness ( 120 Minutes Fire Rating ) 2641 G.I. U Beading Of 1.6 Mm Thick G.I. Sheet With Ceramic Tape 2642 Ceramic Tape 5X20 Mm Size 2704 Aluminium Strip 40 Mm Wide And 2 Mm Thick 2708 Truf Paver ( 500 X 500X 40 Mm ) 2709 Ceremic Tiles Pieces For Crazy Flooring 2710 White Marble Makrana Second Quality Plain Veined Stone Pieces For Crazy Flooting 2711 Fs800h Grade Flooring Panel ( Size 600 Mmx600 Mmx32 Mm ) 2712 Zinc Electroplated Pedestals - 300 Mm 2713 Zinc Electroplated Pedestals - 450 Mm 2714 Zinc Electroplated Tube Stringer 2715 Machine Screw For Fixing 2750 8 Mm Thick Granite Stone Tiles ( Mirror Polished Of All Shades ) 2751 8 Mm Thick Marble Tiles ( Polished ) Raj Nagar 2901 Stone Aggregate ( Single Size ) : 100 Mm Nominal Size 2902 Stone Aggregate ( Single Size ) : 80 Mm Nominal Size 2903 Stone Chippings / Screenings 4.75 Mm Nominla Size 2904 Stone Chippings / Screenings 150 Micron Nominal Size 2908 Over Burnt ( Jhama ) Brick Aggregate: 120 Mm To 40 Mm Size 2909 Over Burnt ( Jhama ) Brick Aggregate: 90 Mm To 40 Mm Siize 2910 Stone Chippings / Screenings 12.5 / 13.2 Mm Nominal Size Secure 2911 Stone Chippings / Screenings 10 / 11.2 Mm Nominal Size 2914 Solvent 2916 Paving Asphalt Vg-10 Of Approved Quality 3002 Polyvinyl Chloride Sheet 400 Micron Thick 3004 Stone Ware Spouts 100 Mm Dia 60 Cm Long 3050 Galvanised Steel Corrugated Sheets 3080 Gunmetal Non-Return Valve-Vertical ( Screwed End ) 25 Mm Dia 3084 Gunmetal Non-Return Valve-Vertical ( Screwed End ) 32 Mm Dia 3088 Gunmetal Non-Return Valve-Vertical ( Screwed End ) 40 Mm Dia 3092 Gunmetal Non-Return Valve-Vertical ( Screwed End ) 50 Mm Dia 3096 Gunmetal Non-Return Valve-Vertical ( Screwed End ) 65 Mm Dia 3213 Vitreous China Surgeon Type Wash Basin Of Size 660X460 Mm 3228 600X120 Mm Glass Shelf With Anodised Aluminium Angle Frame, C.P. Brass Brackets And Guard Rail Of Standard Size 3229 Vitreous China Flat Back Wash Basin 550X400 Mm 3300 Gunmetal Non-Return Valve-Verticlal ( Screwed End ) 80 Mm Dia 3311 C.I. Sluice Valve ( With Caps ) Class Ii : 100 Mm Dia 3314 C.I. Sluice Valve ( With Caps ) Class Ii : 125 Mm Dia 3317 C.I. Sluice Valve ( With Caps ) Class Ii : 150 Mm Dia 3320 C.I. Sluice Valve ( With Caps ) Class Ii : 200 Mm Dia 3321 C.I. Sluice Valve ( With Caps ) Class Ii : 250 Mm Dia 3326 C.I. Sluice Valve ( With Caps ) Class Ii : 300 Mm Dia 3327 15 Mm Battery Based Sensor Pillar Cock 3617 Cp Brass Union 40 Mm Dia 3620 C.C.I. ( Spun ) Socketed Soil, Waste And Vent Pipe 1.80 Metres Long : 100 Mm Dia 3621 C.C.I ( Spun ) Socketed Soil, Waste And Vent Pipe 1.80 Meters Long : 75 Mm Dia 3624 S.C.I. S&S Bends With Access Door 100 Mm Dia 3625 S.C.I. S&S Bends With Access Door 75 Mm Dia 3628 S.C.I. S&S Bend 100 Mm Dia 3629 S.C.I. S&S Bend 75 Mm Dia 3634 S.C.I. S&S Heel Rest Sanitary Bend 100 Mm Dia 3635 S.C.I S&S Heel Rest Sanitary Bend 75 Mm Dia 3640 S.C.I. S&S Single Equal Junctions 100X100x100 Mm 3641 S.C.I. S&S Single Equal Junctions 75X75x75 Mm 3644 S.C.I. S&S Single Equal Junctions Wtih Access Door 100X100x100 Mm 3645 S.C.I. S&S Single Equal Junctions With Access Door 75X75x75 Mm 3650 S.C.I. S&S Double Equal Junctions 100X100x100x100 Mm 3651 S.C.I. S&S Double Equal Junctions 75X75x75x75 Mm 3654 S.C.I. S&S Double Equal Junctions With Access Door 100X100x100x100 Mm 3655 S.C.I. S&S Double Equal Junctions With Access Door 75X75x75x75 Mm 3660 S.C.I. S&S Single Unequal Junctions 100X100x75 Mm 3664 S.C.I. S&S Single Unequal Junctions With Access Door 100X100x75 Mm 3670 S.C.I. S&S Double Unequal Junctions 100X100x75x75 Mm 3674 S.C.I. S&S Double Unequal Junctions With Access Door 100X100x75x75 3681 S.C.I. S&S Single Equal Invert Branch Of Required Degree 100X100x100 Mm Dia 3682 S.C.I. S&S Single Equal Invert Branch Of Required Degree 75X75x75 Mm Dia 3685 S.C.I. S&S Double Equal Invert Branch Of Required Degree 100X100x100x100 Mm Dia 3686 S.C.I. S&S Double Equal Invert Branch Of Required Degree 75X75x75x75 Mm Dia 3690 S.C.I. S&S Single Unequal Invert Branch Of Required Degree 100X100x75 Mm Dia 3695 S.C.I. S&S Double Unequal Invert Branch Of Required Degree 100X100x75x75xmm Dia 3699 S.C.I. S&S, 75 Mm Offsets For 75 Mm Dia Pipe 3707 S.C.I. S&S, 150 Mm Offset For 75 Mm Dia Pipe Secure 3708 S.C.I. S&S, 150 Mm Offset For 100 Mm Dia Pipe 3712 S.C.I. S&S, 114 Mm Offset For 75 Mm Dia Pipe 3713 S.C.I. S&S, 114 Mm Offset For 100 Mm Dia Pipe 3716 S.C.I S&S, 152 Mm Offset For 75 Mm Dia Pipe 3717 S.C.I. S&S, 152 Mm Offset For 100 Mm Dia Pipe 3728 S.C.I. S&S, Door Peeces 100 Mm Dia 3729 S.C.I. S&S, Door Pieces 75 Mm Dia 3733 S.C.I. S&S, Slotted Cowl ( Terminal Guard ) 100 Mm 3734 S.C.I. S&S, Slotted Cowl ( Terminal Guard ) 75 Mm 3738 S.C.I. S&S, Collars 100 Mm 3739 S.C.I. S&S, Collars 75 Mm 3746 S.C.I. S&S, 75 Mm Offset For 75 Mm Dia Pipe 3747 S.C.I. S&S, 75 Mm Offset For Mm Dia Pipe 3749 Vitreous China Toilet Paper Holder Of Standard Size 3860 560 Mm Dia Cover With Frame ( Heavy Duty ) 3861 560 Mm Dia Cover Without Frame ( Heavy Duty ) 3991 Galvanized Iron ( 1.6 + / - 0.2 Mm ) Thick Reinforcement For Small Series Casement Window / Door Frame, Sash, Mulion & Small Series Sliding Window Frame 3992 Galvanized Iron ( 1.6 + / - 0.2Mm ) Thick Reinforcement For Big Series Casement Window / Door Frame, Sash Mullion & Small Series Sliding Window Frame 3993 Galvanized Iron ( 1.6 + / - 0.2Mm ) Thick Reinforcement For Big Series Casement Door Sash 3994 Galvanized Iron ( 1.6 + / - 0.2Mm ) Thick Reinforcement For Big Series Sliding Window / Door Sash 3995 G. I Fasteners 100 X 8 Mm 4001 Stainless Steel ( Grade - 304 ) Hollow Section Round / Square Tubes 4002 Stainless Steel Bolts / Square Bar And Plates 4006 Pressed Steel Door Fames ( Mild Steel Sheet 1.60 Mm ) Profile B 4007 Pressed Steel Door Fames ( Mild Steel Sheet 1.60 Mm ) Profile C 4008 Pressed Steel Door Fames ( Mild Steel Sheet 1.60 Mm ) Profile E 4009 Mild Steel Tubes Hot Finished Welded Type 4010 Mild Steel Tubes Hot Finished Seamless Type 4011 Mild Steel Tubes Electric Resistant Or Induction Butt Welded 4012 Circular C.I. Bok For Ceiling Fan 4013 Pulley 40 Mm Dia 4201 Aluminium Primer 4202 Red Oxide Zinc Chromate Primer 4203 Copper Acetate 4204 Hydrochloric Acid 4205 Copper Chloride 4206 Copper Nitrate 4207 Ammonium Chloride 5001 Mobil Oil 5050 Ss Pipe 304 Grades With Press Fit Technology As Per Jis 3448 Standard 48.60 Mm Outer Dia 5743 Coloured Inter Locking C.C. Paver Block 6001 White Marble Slab Makrana Second Quality Plain Veined 18 Mm Thick 6007 Pink Marble Slab Plain 18 Mm Thick 6010 Udaypur Green Marble Slab Plain 18 Mm Thick 6019 Black Zebra Marble Slab Plain 18 Mm Thick 6501 Sand Zone V ( Jamuna ) 7001 Brass 100 Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles 7003 Pair Anodised Aluminium Lever Handles For 100 Mm Mortice Latch And Lock 7004 Vitreous China Flat Back Wash Basin 450X300 Mm 7005 Vitreous China 10 Litres Low Level Cistern Without Fittings 7006 Vitreous China 10 Litres Low Level Cistern With Fittings 7008 F.P.S. ( Non Modular ) Clay Fly Ash Bricks Class Designation 7.5 Secure 7009 12.5 Mm Thick Tapered Edge Gypsum Plain Board 7010 Galvanised Steel Celling Section ( Size 80X26x0.50 Mm ) 7011 Galvanised Steel Perimetre Channel ( Size 20X27x30x0.50 Mm ) 7012 Galvanised Steel Intermediate Channel ( Size 15X45x15x0.90 Mm ) 7013 Galvanised Steel Angle Hanger ( Celling Angle ) ( Size 25X10x0.50 Mm ) 7014 Galvanised Steel Connecting Clips ( 2.64 Dia And 230 Mm Long Gi Wire ) 7015 Galvanised Steel Soffit Cleat ( Size 27X37x25x0.60 Mm ) 7016 Joint Filler 7017 Joint Finisher 7018 Joint Tape Roll 7019 Dash Fastener / Chemical Fastener 7020 All Drive Screws ( For Gypsum Board ) 7021 Primer ( For Gypsum Board ) 7022 Chlorpyriphos 20% E.C. / Lindane 20% E.C. 7023 Chromium Plated Brackets ( Curtain Rods ) 7024 Acid Proof Cement 7025 Self Tapping Pan Head Nickel Coated Mild Steel Screws Of Size 13 X 3.2 Mm 7026 Fibre Joint Tape 50 Mm Wide ( 90 Metre ) Roll 7027 M.S. Butt Hinges 125X90x4 Mm 7028 12.5 Mm Thick Fully Perforated Gypsum Board 7029 Galvanised Wire Mesh Of Average Width Of Aperture 1.4 And Nominal Dia. Of Wire 0.63 Mm 7030 12.5 Mm Thick Tapered Edge Gypsum Fire Resistant Board 7031 12.5 Mm Thick Tapered Edge Gypsum Moisture Resistant Board 7032 Frosted Glass Sheet Or Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) 7033 Nickel Plated M.S. Pipe 25 Mm Dia. 7034 Nickel Plated M.S. Pipe 20 Mm Dia 7035 Nickel Palted M.S. Brackets For Curtain Rod 20 Mm 7036 Nickel Plated M.S. Bracekts For Curtain Rod 25 Mm 7040 Oxidised Mild Steel Screws 35 Mm 7042 Mild Steel Conduit Pipe ( Heavy Type ) Isi Marked-20 Mm Dia. 7043 Mild Steel Conduit Pipe ( Heavy Type ) Isi Marked-25 Mm Dia 7044 Rolling Shutters Of 80X0.90 Mm Laths 7045 Rolling Shutters Of 80X1.2 Mm Laths 7046 Top Cover Of Rolling Shutters 0.90 Mm Thick 7047 Top Cover Of Rolling Shutters 1.20 Mm Thick 7048 Rawl Plug 50 Mm ( Designation 10 Nos ) 7049 Teak Wood Lipping Of Size 25X3 Mm In Pelmets 7050 Pu Primer 7051 40 Mm ( Average ) Pu Spray Having 40-45 Kg / M3 Density 7052 Gi Wire Netting 3 / 4 7053 400 G Polythene Sheet 7055 Flat Pressed 3 Layer And Graded Particle Board ( Medium Density ) Grade 1 Conforming To Is : 3087-18 Mm Thick 7056 Almonium Tee Channel ( Heavy Duty ) With Rollers And Stop End 7059 Aluminium Hanging Floor Door Stopper With Twin Rubber & Stopper 7060 Hydraulic Door Closer Tubular Type Aluminium Section Body 7063 Oxidised M.S. Casement Stay ( Straight Peg Type ) 300 Mm Not Less Than 0.33 Kg 7064 Oxidised M.S. Casement Stay ( Straight Peg Type ) 250 Mm Not Less Than 0.28 Kg 7065 Oxidised M.S. Casement Stay ( Straight Peg Type ) 200 Mm Not Less Than 0.24 Kg 7068 Extra For Providing Grilled Rolling Shutters With 8 Mm Dia M.S. Rod 7070 Chequered Precast Cement Concrete Tiles 22 Mm Thck Using Marble Chips Of Size 6 Mm - Light Shade Using White Cement 7071 White Marble Raj Nagar Plain 18 Mm Thick Upto 0.50 Sqm Area 7072 Wall Mounted Water Closet Secure 7073 Adjustable Vetrious China Cistern With Fittings 7074 White Vetrious China Waterless Urinal 7075 Cistern With Fittings For Waterless Urinal 7076 White Vetrious Urinal 7077 Acid And Alkali Resistant Tiles 300X300 Mm Size, 10 Mm Thick 7087 S.C.I. Tee 150 Mm 7090 Expanded Polystyrene Type N- Normal 7091 Expanded Polystyrene Type - Se 7095 Stainless Steel Kitchen Sink - With Drain Board Bowl Depth 250 Mm 7096 Stainless Steel Kitchen Sink - With Drain Board 510X 1040 Mm Bowl Depth 225 Mm. 7097 Stainless Steel Kitchen Sink - With Drain Board 510 X 1040 Mm Bowl 7098 Stainless Steel Kitchen Sink - With Drain Board 510 X 1040 Mm Bowl Depth 178 Mm 7101 Stainless Steel Kitchen Sink - Without Drain Board 610X510 Mm Bowl Depth 200 Mm 7102 Stainless Steel Kitchen Sink - Without Drain Board 610X460 Mm Bowl Depth 200 Mm 7103 Stainless Steel Kitchen Sink - Without Drain Board 470X420 Mm Bowl Depth 178 Mm 7104 Coloured Orissa Pattern W.C. Pan 580X440 Mm 7105 Coloured Pedestal Type W.C. Pan 580X440 Mm ( European Type ) 7106 Coloured Vitreous China 10 Lit. Low Level Cistern 7107 Coloured ( Other Than Black ) Solid P.V.C. Seat In European W.C. Pan 7112 Circular Shape 450 Mm Dia Mirror With Plastic Moulded Frame 7113 Rectangular Shape 453X357 Mm Mirror With Plastic Moulded Frame 7114 Oval Shape 450X350 Mm ( Outer Dimension ) Mirror With Plastic Moulded Fame 7115 Rectangular Shape 1500X450 Mm Mirror With Plastic Moulded Frame 7116 Hard Board 6 Mm Thick 7117 Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings 7118 Semi Rigid Pvc Waste Pipe For Sink And Wash Basin 40 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings 7119 Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 32 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings 7120 Flexible ( Coil Shaped ) Pvc Waste Pipe For Sink And Wash Basin 40 Mm Dia With Length Not Less Than 700 Mm I / C Pvc Waste Fittings 7121 Bottle Traop 7122 Cp Brass Single Lever Telephonic Wall Mixer Of Approved Make 7123 Coloured High Density Polyethylene / Poly Propylene 10 Lit. ( Full Flush ) Capacity Controlled Low Level Flushing Cistern With Fittings 7126 White Vitreous China 10 Lit. ( Full Flush ) Capacity Controlled Low Level Flushing Cistern With All Fittings 7127 Coloured Vitreous China 10 Lit. ( Full Flush ) Capacity Controlled Low Level Flushing Cistern With All Fittings 7128 S.W. Intercepting Trap 100 Mm Dia 7129 S.W. Intercepting Trap 150 Mm Dia 7130 Rectangular Shape 600X 450 Mm Precast R.C.C. Manhole Cover With Frame - L.D. - 25 7131 Square Shape 450X450 Mm Precast R.C.C. Manhole Cover With Frame L.D. -25 7132 Circular Shape 450 Mm Dia Precast R.C.C. Manhole Cover With Frame L.D. -25 7133 Rectangular Shape 500X500 Mm Precast R.C.C. Manhole Cover With Frame - M.D.-10 7134 Circular Shape 500 Mm Dia Precast R.C.C. Manhole Cover With Frame M.D. 1 10 7135 Circular Shape 560 Mm Dia Precast R.C.C.Manhole Cover With Frame H.D. - 20 7136 Circular Shape 560 Mm Thick Shutters With Frame E.H.D. -35 7137 Factory Made 35 Mm Thick Shutters With Laminated Veneer Lumber Styles & Rails As Per Tads 15:1995 And Panels Of 12 Mm Thick Plain Type-I, Medium Density Flat Pressed Three Layer, Graded Particle Board ( Fpt - As Per Is:3087 Bonded With Bwp Type Secure 7139 Factory Made 35 Mm Thick Shutters With Laminated Veneer Lumber Styles & Rails As Per Tads 15:1995 And Panels Of 12 Mm Thick Both Sides Prelaminated Type - I, Medium Density Flat Pressed Three Layer, Graded Particle Board ( Fpt - I ) As Per Is:3087 Bonded With Bwp Type Synthetic Resin Adhesive, As Per Is:848 7143 Factory Made 35 Mm Thick Shutters With Laqminated Veneer Lumber Styles & Rails As Per Tads 15:1995 And Panels Of 12 Mm Thick On E Side Prelaminated Type-I, And Other Side Balancing Lamination, Medium Density Flat Pressed Three Layer, Graded Particle Board ( Fpt-I ) As Per 3087 Bonded With Bwp Type Synthetic Resin Adhesive, As Per Is: 848 7151 Factory Made 30 Mm Thick Shutters With Laminated Veneer Lumbers Styles & Rails As Per Tads 15:1995 And Panels Of Sheet Glass Using 10 Kg / Sqm Glass Panes 7154 Factory Made 35 Mm Thck Shutters With Laminated Veneer Lumber Styles & Rails As Per Tads 15:1995 And Panels Of Galvanised Wire Of Dia Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm 7155 Factory Made 30 Mm Thick Shutters With Laminated Veneer Lumber Styles & Rauks As Oer Tads 15:1995 And Panels Of Galvanised Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Direction With Wire Of Dia 0.63 Mm 7157 Laminated Veneer Lumber Confirming To Tads 15:1995 Manufactured Factory In Frames Of Doors, Windows 7178 Chemical Astmc- Type I 7181 C.I. Pile Shoe 7182 M.S. Clamps For Pile Shoe 7183 Bentonite 7184 Oxidised M.S. Safety Chain ( Weighing Not Less Than 450 Gms ) For Door 7187 C.I. Grating 150 Mm Dia, Weighing Not Less Than 440 Gm 7188 Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 75 Mm Dia 7189 Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia 7190 Upvc Pipes ( Working Pressure 4 Kg / Cm 2 ) Rubber ( Seal ) Ring 75 Mm Dia 7191 Upvc Pipes ( Working Pressure 4 Kg / Cm2 ) Rubber ( Seal ) Ring 110 Mm Dia 7192 Upvc Coupler For Upvc Drainage Pipes 75 , Mm 7193 Upvc Coupler For Upvc Drainage Pipes 110 Mm 7194 Upvc Pushfit Coupler ( Single ) 75 Mm Thick 7195 Upvc Pushfit Coupler ( Single ) 110 Mm Thick 7196 Upvc Single Equal Tee ( Without Door ) 75X75x75 Mm 7197 Upvc Single Equal Tee ( Without Door ) 110X110x110 Mm 7198 Upvc Single Equal Tee ( With Door ) 75X75x75 Mm 7199 Upvc Single Equal Tee ( With Door ) 110X110x110 Mmmm 7208 Upvc Bend 87.50, 75 Mm Bend 7209 Upvcbend 87.50, 110 Mm Bend 7212 Upvc Plain Shoe 75 Mm Bend 7213 Upvc Plain Shoe 110 Mm Bend 7214 Upvc Pipe Clip 75 Mm Bend 7215 Upvc Pipe Clip 110 Mm Bend 7231 Resin Bonded Glass Wool 16 Kg / M3 50 Mm Thick 7232 Resin Bonded Glass Wool 24 Kg / M3 50 Mm Thick 7233 Fibre Glass Tissue Reinforcemet Type Ii Grade I 7236 Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement 7237 Precast Chequered Cement Tiles 22 Mm Thick Medium Shade Using 50% White Cement 50% Ordinary Cement 7238 High Allbedo Paint 7239 Epoxy Paint 7240 Fire Retardant Paint 7241 Melamine Polish 7244 Table Rubbed Polished Stone 18 Mm Thick ( 75X50 Cm ) Agaria Marble Stone - 18 Mm Thick 7245 Table Rubbed Polished Stone 18 Mm Thick ( 75X50cm ) Granite Stone 18Mm Thick Secure 7246 Vertical Load Testing ( Initial ) Of Pipes In Accordance With Is : 2911 ( Part - Iv ) Including Installation Of Loading Platform And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc. Complete As Per Specification And Up To 50 Mt Capacity Pile 7247 Vertical Load Testing ( Initial ) Of Piles In Accordance With Is : 2911 ( Part - Iv ) Including Installation Of Loading Platform And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc. Compete As Per Specification & Above 50Mt And Up To 100 Mt 7248 Vertical Load Testing ( Inigial ) Pf Piles In Accordance With Is : 2911 ( Part-Iv ) Including Installation Of Loading Platform And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc. Complete As Per Specification & Group Of Two Ro More Up To 50 Mt 7249 Cyclic Vertical Load Testing Of Piles In Accordance With Is : 2911 ( Part-Iv ) Including Prepartion Of Pile Head Etv. For Single Pile Above 50 Tonne Capacity Pile And Up To 100 Tonnecapacity Pile 7250 Cyclic Vertical Load Testing Of Piles In Accordance With Is : 2911 ( Part-Iv ) Including Preparation Of Pile Head Etc. For Single Pile Above 50 Tonne Capacity Pile And Up To 100 Tonnecapacity Pile 7251 Cyclic Vertical Load Testing Of Piles In Accoraance With Is : 2911 ( Part - Iv ) Including Preparation Of Pile Head Etc. For Group Of Two Piles Up To 50 Tonne Capacity Each 7252 Lateral Load Testing Of Single Pile In Accordance With Is : 2911 Part -Iv For Detemining Safe Allowable Lateral Load Load On Pile. Up To 50 Tonne Capacity 7253 Lateral Load Testing Of Single Pile In Accordance With Is : 2911 Part - Iv For Detemining Safe Allowable Lateral Load On Pile. Above 50 Tonne Capacity 7254 Hardening Compound 7255 Road Marking Paint ( Spirit Based ) 7256 Superior Quality Road Marking Paint ( Water Based ) 7257 C.P.Brass Bibcock 15 Mm 7258 C.P. Brass Long Nose Bibcock 15 Mm 7259 C.P. Brass Long Body Bibcock 15 Mm 7260 C.P. Brass Stop Cock ( Concealed ) 15 Mm 7261 C.P. Brass Angle Valve 15 Mm 7266 Pressed Clay Tiles 20 Mm Thick 250 X 250 Mm Size 7267 Plain Ceiling Tiles ( Bwp Type Phenol Formaldehyde Synthetic Resin Bonded ) 600X600x12 Mm ) 7268 Semi Perforated Ceiling Tiles ( 600X600x12 Mm ) 7269 25 Mm Thick Particle Board 7270 30 Mm Thick Prelaminated Flush Door Shutter 7271 Iind Class Teak Wood Lipping 25 Mm Wide X 12 Mm Thick 7272 25 Mm Thick Melamine Faced Prelaminated Three Layer Particle Board 7273 Resin Bonded Rockwool 48Kg / M3 7274 Glass Wool 50 Mm Thick 7280 Waste Plastic Additive 7281 Chemical Astmc -Type Ii 7295 Granite Of Any Colour, 18 Mm Thick ( Slab Area Upto 0.50 Sqm ) 7296 Granite Of Any Colour, 30 Mm Thick ( Slab Area Up To 0.50 Sqm ) 7297 Granite Of Any Colour, 18 Mm Thick ( Slab Area Above 0.50 Sqm ) 7306 Aluminium T Or L Sections 7307 For Flush Door Shutters Extra For Providing Teak Veneering On One Side Instead Of Commercial Veneering 7309 Paving Asphalt Of Grade Vg-30 Of Approved Quality 7312 Expandable Fastener With Plastic Sleeve And M.S.Screws, 25 Mm Long 7313 Expandable Fastener With Plastic Sleeve And M.S.Screws, 32 Mm Long 7314 Expandable Fastener With Plastic Sleeve And M.S. Screws, 40 Mm Long 7315 Expandable Fastener With Plastic Sleeve And M.S. Screws, 50 Mm Long 7318 Plasticizer / Super Plasticizer 7319 Wall Form Panel 1250X500 Mm 7320 Tie Bolt 12 Mm Dia 100 Mm Length 7321 Tie Bolt 12 Mm Dia 150 Mm Length 7322 Tie Bolt 20 Mm Dia 150 Mm Length 7323 Tile Bolt 20 Mm Dia 225 Mm Length 7324 Spring Coil 12 Mm Secure 7325 Plastic Cone 12 Mm Dia 7326 Corner Angle 45X45x5 Mm 1.50 M Long 7327 100 Mm Channel Shoulder 2.5 M Long 7328 Double Clip ( Bridge Clip ) 7329 Single Clip 7330 M.S. Tube 40 Mm Dia 7331 Wall Form Panel 1250X450xmm 7332 Corner Angle 45X45x5 Mm 2.50 Long 7333 Column Clamp 450X1070 Mm 7334 Prop 2 M ( 2-3.5M ) 7335 Binding Wire 7338 Gun Metal Cramp 7339 Stainless Steel Cramp 7340 Stainless Steel Pin 7342 Adjustable Span Eso+Si ( 2.35-3.40 ) 7343 Adjustable Telescopic Prop 3 M ( 2.02-3.75M ) 7344 Beam Clamp 300-380 Mm ( 450-1070 Mm ) 7345 Prop 4 M 7346 Double Coupler 7347 Cadmium Plated Full Threaded Steel Screws ( 30X4 Mm Dia. ) 7348 Aluminium Washer 2 Mm Thick 15 Mm Dia 7349 12 Mm M.S. U Beading 7354 Plastic Encapsulated M.S. Foor Rest 30X20x15 Cm 7358 Flushing Cistern P.V.C. 10 Lts Capacity ( Low Level ) ( White ) ( With Fittings, Accessories And Flush Pipe ) 7359 P.V.C. Automatic Flushing Cistern 5 Lts Capacity 7361 P.V.C. Automatic Flushing Cistern 10 Lts Capacity 7363 15 Mm C.P. Brass Tap With Elbow Operation Lever 7364 White Glazed Fire Clay Draining Board 600X450x25 Mm 7366 Glass Reinforced Gypsum ( Grg ) Board 12.5 Mm Thick 7367 Galvanised M.S. Sheet 0.5 Mm Thick Pressed Channel Section Of Size 50X32 Mm 7369 Galvanised M.S. Sheet 0.50 Mm Thick Pressed Stud. 48X34x36 Mm 7375 G.I. Flush Pipe And C.P. Brass Spreader Including C.P. Connecting Pipe Single Lipped Urinal 7376 G.I. Flush Pipe And C.P. Brass Spreader Including C.P. Connecting Pipe Range Of Two Lipped Urinals 7377 G.I. Flush Pipe And C.P. Brass Spreader Including C.P. Connecting Pipe Range Of Three Lipped Urinals 7378 G.I. Flush Pipe And C.P. Brass Spreader Including C.P. Connecting Pipe Range Of Four Lipped Urinals 7379 White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 7380 Precast R.C.C. Grating With Frame 500X450 Mm Horizontal Grating 7381 Precast R.C.C. Grating With Frame 450X100 Mm Vertical Grating 7382 Bitumen Emulsion Rapid Setting ( R.S. ) Confirming To Is: 8887 7383 12 Mm Dia 50 Mm Long Wedge Type Expanded Zinc Alloy Dash Fastener 7385 3 Mm Thick Translucent White Acrylic Plastic Sheet 7386 12 Mm Thick Particle Board Ceiling Tile 7387 Spigot For Standard Jointing 7388 Dash Hold Fastener 12.5 Mm Dia, 50 Mm Long With 6 Mm Dia Bolt 7389 Anodising 15 Microns On Aluminium Sections 7390 Neoprene / Epdm Rubber Gasket 7391 Anodising 25 Microns On Aluminium Sections 7392 Powder Coating 50 Microns On Aluminium Sections 7393 Polyester Powder Coating 50 Microns On Aluminium Sections 7394 Double Action Hydraulic Floor Spring With Stainless Steel Cover Plate 7395 6 Mm Dia. G.I Adjustable Hangers Including Clips ( Up To 1.2 M Length ) 7396 Double Action Hydraulic Floor Spring With Brass Cover Plate 7397 Base Jack Secure 7398 Challies 7399 Cup Locks 7400 15 Mm Ptmt Bib Cock 7401 15 Mm Ptmt Bib Cock With Flange ( Fancy ) 7402 15 Mm Ptmt Bib Cock Long Body With Flange 7403 15 Mm Ptmt Bib Stop Cock ( Male Thread ) 7405 20 Mm Dia. Ptmt Bib Stop Cock 7406 Ptmt Pillar Cock 7407 Ptmt Push Cock 15 Mm Dia 7408 Ptmt Push Cock 12 Mm Dia 20 Mm Bsp 7409 Ptmt Grating 100 Mm Dia 7410 Ptmt Pillar Cock ( Fancy ) 15 Mm Foam Flow 7411 125 Mm Grating With Waste Hole 7412 Rectangular Type With Openable Circular Lid 150 Mm Size 18 Mm High With 100 Mm Dia ( 110 Gm ) 7415 Double Acting Air Valve 50 Mm 7416 Double Acting Air Valve 80 Mm 7417 Double Acting Air Valve 100 Mm 7418 Water Meter ( Including Testing Charges ) 80 Mm 7419 Water Meter ( Including Testing Charges ) 150 Mm 7420 Water Meter ( Including Testing Charges ) 150 Mm 7421 Water Meter ( Including Testing Charges ) 200 Mm 7422 Dirt Box Strainer 80 Mm 7423 Dirt Box Strainer 100 Mm 7424 Dirt Box Strainer 150 Mm 7425 Dirt Box Strainer 200 Mm 7426 Cats Eye 7427 Water Stops Serrated With Central Bulb ( 225 Mm Wide, 8-11 Mm Thick ) 7428 Water Stops Dumb Bell With Central Bulb 7429 Kickers 7430 Wedge Expansion Hold Fastener 1 / 4 Or 6 Mm 7431 Wedge Expansion Hold Fastener 3 / 8 Or 10 Mm 7432 Wedge Expansion Hold Fastener 1 / 2 7439 8 Mm Thick ( Mirror Polished Tiles Machine Cut Edge ) Raj Nagar White 7442 Wheel 75 Mm Dia. 40 Mm Wide 7443 Aluminium Single Cleat Of Size 30X32x3 Mm 7444 Aluminium Grip Strip Of 50X12x2 Mm 7445 25 Mm Thick Prelaminated Flush Door Shutter Both Side Decorative 7449 Aluminium U Beading 7451 Glass Sheet ( Pin Headed ) 4 Mm Thick 7452 Raj Nagar Plain White Marble ( Table Rubbed Add Polished ) 18 Mm Thick ( Slab Area Upto 0.50 Sqm ) 7453 Raj Nagar Plain White Marble ( Table Rubbed And Polished ) 18 Mm Thick ( Slab Area More Than 0.50 Sqm ) 7466 Second Class Deodar Teak Wood Lipping 30 Mm Wide X 12 Mm Thick 7468 Veneered Particle Board With Commercial Veneering On Both Sides 12 Mm Thick 7477 Prelaminated Particle Board With One Side Decorative And Other Side Balancing Lamination, Flat Pressed 3 Layer & Graded ( Medium Density ) Grade I, Type Ii Conforming To Is:12823 ( Exterior Grade ) 12 Mm Thick 7478 Prelaminated Particle Board With One Side Decorative And Other Side Balancing Lamination, Flat Pressed 3 Layer & Graded ( Medium Density ) Grade I, Type Ii Conforming To Is:12823 ( Exterior Grade ) 18 Mm Thick 7479 Prelaminated Particle Board With One Side Decorative And Other Side Balancing Lamination, Flat Pressed 3 Layer & Graded ( Medium Density ) Grade I, Type Ii Conforming To Is:12823 ( Exterior Grade ) 25 Mm Thick 7480 Prelaminated Particle Board With Both Side Decorative Lamination, Flat Pressed 3 Layer & Grade ( Medium Density ) Grade I, Type Ii Conforming To Is: 12823 ( Exterior Grade ) 12 Mm Thick 7485 Oxidised M.S. Hinges Finished With Nickel Plating 50 Mm ( Pver All Width ) 7486 Oxidised M.S. Hinges Finished With Nickel Plating 65 Mm ( Over All Width ) 7491 Ptmt - Waste Coupling 31 / 32 Mm Secure 7492 Ptmt - Waste Coupling 38 / 40 Mm 7493 Ptmt - Bottle Trap 31 / 32 Mm 7494 Ptmt - Bottle Trap 38 / 40 Mm 7495 Ptmt - Ball Cock 15 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball 7496 Ptmt - Ball Cock 120 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball 7497 Ptmt - Ball Cock 25 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball 7498 Ptmt - Ball Cock 40 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball 7499 Ptmt - Ball Cock 50 Mm Complete With Epoxy Coated Aluminium Rod & H.D. Ball 7500 Ptmt - Angle Stope Cock With Flange 15 Mm 7501 Ptmt - Swiveling Shower 15 Mm 7503 Ptmt - Liquid Soap Container Of 400 Ml Capacity 7504 Ptmt - Towel Ring 215X200x37 Mm 7505 Ptmt - Towel Rail ( 450 Mm ) 7506 Ptmt - Towel Rail ( 600 Mm ) 7507 Ptmt - Shelf 450X124x36 Mm 7508 Ptmt - Urinal Spreader 15 Mm 7509 Ptmt - Soap Dish / Holder 138X102x75 Mm 7512 Ptmt - Handle 125X34x24 Mm 7513 Ptmt - Handle150x34x24 Mm 7514 Ptmt - Butt Hinges 75X60x10 Mm 7515 Ptmt - Butt Hinges 100X75x10 Mm 7516 Ptmt - Tower Bolt 152X42x18 Mm 7517 Ptmt - Tower Bolt 202X42x18 Mm 7518 Ptmt - Door Catcher 72X42 Mm 7552 Coir Veneered Board 4 Mm Thick 7553 Coir Veneered Board 6 Mm Thick 7555 Coir Veneered Board 12 Mm Thick 7556 Coir Veneered Board 18 Mm Thick 7621 Hubless Centrifugally Cast ( Spun ) Iron Pipes As Per Is 15905 - 100 Mm Dia ( 3000 Mm Length Pipe ) 7622 Hubless Centrifugally Cast ( Spun ) Iron Pipes As Per Is 15905 - 75 Mm Dia ( 3000 Mm Length Pipe ) 7623 Hubless Centrifugally Cast ( Spun ) Iron Plain Bend As Per Is 15905 - 100 Mm Dia 7624 Hubless Centrifugally Cast ( Spun ) Iron Plain Bend As Per Is 15905 - 75 Mm Dia 7625 Hubless Centrifugally Cast ( Spun ) Iron Double Equal Plain Junction As Per Is 15905 - 100X100x100x100 Mm Dia 7626 Hubless Centrifugally Cast ( Spun ) Iron Double Equal Plain Junction As Per Is 15905 - 75X75x75x75 Mm Dia 7627 Hubless Centrifugally Cast ( Spun ) Iron Single Equal Plain Junction As Per Is 15905 - 100X100x100 Mm Dia 7628 Hubless Centrifugally Cast ( Spun ) Iron Single Equal Plain Junction As Per Is 15905 - 75X75x75 Mm Dia 7629 Hubless Centrifugally Cast ( Spun ) Iron Double Unequal Plain Junction As Per Is 15905 - 100X100x75x75 Mm Dia 7630 Hubless Centrifugally Cast ( Spun ) Iron Single Unequal Plain Junction As Per Is 15905 - 100X100x75 Mm Dia 7631 Hubless Centrifugally Cast ( Spun ) Irong Double Equal Plain Invert Branch As Per Is 15905 - 100X100x100x100 Mm Dia 7632 Hubless Centrifugally Cast ( Spun ) Iron Single Equal Plain Invert Branch As Per 15905 - 100X100x100 Mm Dia 7633 Hubless Centrifugally Cast ( Spun ) Iron Single Equal Plain Invert Branch As Per Is 15905 - 75X75x75 Mm Dia 7634 Hubless Centrifugally Cast ( Spun ) Iron Single Unequal Plain Invert Branch 45 Degree As Per Is 15905 - 100X100x75 Mm Dia 7635 Hubless Centrifugally Cast ( Spun ) Iron 65 Mm Offset With 100 Mm Dia Pipe As Per Is 15905 7636 Hubless Centrifugally Cast ( Spun ) Iron 65 Mm Offset With 75 Mm Dia Pipe As Per Is 15905 Secure 7637 Hubless Centrifugally Cast ( Spun ) Iron 130 Mm Offset With 100 Mm Dia Pipe Per Is 15905 7638 Hubless Centrifugally Cast ( Spun ) Iron 130 Mm Offset With 75 Mm Dia Pipe Per Is 15905 7639 Hubless Centrifugally Cast ( Spun ) Iron Bend With Acess Door - 100 Mm Dia As Per 15905 7640 Hubless Centrifugally Cast ( Spun ) Iron Bend With Acess Door - 100 Mm Dia As Per 15905 7641 Hubless Centrifugally Cast ( Spun ) Iron Terminal Guard ( Slotted Cowl ) - 100 Mm Dia As Per Is 15905 7642 Hubless Centrifugally Cast ( Spun ) Iron Trap With 100 Mm Inlet And 100 Mm Outlet As Per Is 15905 7643 Hubless Centrifugally Cast ( Spun ) Iron Trap With 100 Mm Inlet And 75 Mm Outlet As Per Is 15905 7644 Ss 304 Grade Shielded Coupling With Epdm Rubber Gasket For 100 Mm Dia Hubless Centrifugally Cast ( Spun ) Iron 7645 Ss 304 Grade Shielded Coupling With Epdm Rubber Gasket For 75 Mm Dia Hubless Centrifugally Cast ( Spun ) Iron 7651 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 100 Mm Dia 7652 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 150 Mm Dia 7653 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 Mm Dia 7654 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 250 Mm Dia 7655 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 300 Mm Dia 7656 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 350 Mm Dia 7657 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 400 Mm Dia 7658 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329- 450 Mm Dia 7659 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 500 Mm Dia 7660 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 600 Mm Dia 7661 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 700 Mm Dia 7662 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 750 Mm Dia 7663 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 800 Mm Dia 7664 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 - 900 Mm Dia 7665 Ductile Iron Class K - 9 Pipe Conforming To I.S. 8329 -1000 Mm Dia 7666 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 100 Mm Dia 7668 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 150 Mm Dia 7669 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 200 Mm Dia 7670 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 250 Mm Dia 7671 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 300 Mm Dia 7672 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 350 Mm Dia 7673 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 400 Mm Dia 7674 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 450 Mm Dia 7675 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 500 Mm Dia 7676 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 600 Mm Dia 7677 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 700 Mm Dia 7678 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 750 Mm Dia 7679 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 800 Mm Dia 7680 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 900 Mm Dia 7681 Rubber Gaskets Conforming To I.S. 5382 Of S.B.R Quality 1000 Mm Dia 7682 Ductile Iron K-12 Specials Suitable For Push On Jointing Upto 600 Mm Dia 7683 Ductile Iron K-12 Specials Suitable For Push On Jointing Over 600 Mm Dia 7684 Ductile Iron Specials Suitable For Mechanical Jointing As Per I.S. 9523 Utp 600 Mm Dia 7685 Ductile Iron Specials Suitable For Mechanical Jointing As Per I.S. 9523 Upto 600 Mm Dia 7686 Ductile Iron Pipe Class K-9 Flanges And Welding 100 Mm Dia 7687 Ductile Iron Pipe Class K-9 Flanges And Welding 150 Mm Dia 7688 Ductile Iron Pipe Class K-9 Flanges And Welding 200 Mm Dia 7689 Ductile Iron Pipe Class K-9 Flanges And Welding 250 Mm Dia 7690 Ductile Iron Pipe Class K-9 Flanges And Welding 300 Mm Dia 7691 Ductile Iron Pipe Class K-9 Flanges And Welding 350 Mm Dia 7692 Ductile Iron Pipe Class K-9 Flanges And Welding 400 Mm Dia Secure 7693 Ductile Iron Pipe Class K-9 Flanges And Welding 450 Mm Dia 7694 Ductile Iron Pipe Class K-9 Flanges And Welding 500 Mm Dia 7695 Ductile Iron Pipe Class K-9 Flanges And Welding 600 Mm Dia 7696 Ductile Iron Pipe Class K-9 Flanges And Welding 700 Mm Dia 7697 S&S Centrifugally ( Spun ) C.I. Pipe Class La 100 Mm Dia 7698 S&S Centrifugally ( Spun ) C.I. Pipe Class La 125 Mm Dia 7699 S&S Centrifugally ( Spun ) C.I. Pipe Class La 150 Mm Dia 7700 S&S Centrifugally ( Spun ) C.I. Pipe Class La 200 Mm Dia 7701 S&S Centrifugally ( Spun ) C.I. Pipe Class La 250 Mm Dia 7702 S&S Centrifugally ( Spun ) C.I. Pipe Class La 300 Mm Dia 7703 S&S Centrifugally ( Spun ) C.I. Pipe Class La 350 Mm Dia 7704 S&S Centrifugally ( Spun ) C.I. Pipe Class La 400 Mm Dia 7705 S&S Centrifugally ( Spun ) C.I. Pipe Class La 450 Mm Dia 7706 S&S Centrifugally ( Spun ) C.I. Pipe Class La 500 Mm Dia 7707 S&S Centrifugally ( Spun ) C.I. Pipe Class La 600 Mm Dia 7708 S&S Centrifugally ( Spun ) C.I. Pipe Specials As Per Is 1538 Suitable For Lead Jointing Up To 300 Mm Dia 7709 S&S Centrifugally ( Spun ) C.I. Pipe Specials As Per Is 1538 Suitable For Lead Jointing Over 300 Mm Dia 7710 S&S Centrifugally ( Spun ) C.I. Pipe Specials Suitable For Mechanical Joint As Per I.S. 13382 Up To 300 Mm Dia 7711 S & S Centrifugally ( Spun ) C.I. Pipe Specials Suitable For Mechanical Joint As Per Is 13382 Over 300 Mm Dia 7712 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I Pipe Pf Class B Confroming To I.S. 1536.- 100 Mm Dia 7713 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 150 Mm Dia 7714 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536 - 200 Mm Dia 7715 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 250 Mm Dia 7716 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 300 Mm Dia 7717 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 350 Mm Dia 7718 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 400 Mm Dia 7719 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 450 Mm Dia 7720 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 500 Mm Dia 7721 Screwed Double Flanged Centrifugally Cast ( Spun ) C.I. Pipe Of Class B Conforming To I.S. 1536, - 600 Mm Dia 7722 Ductile Iron Class K- 7 Pipe Conforming To I.S.8329 - 100 Mm Dia 7723 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 150 Mm Dia 7724 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 200 Mm Dia 7725 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 250 Mm Dia 7726 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 300 Mm Dia 7727 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 350 Mm Dia 7728 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 400 Mm Dia 7729 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 450 Mm Dia 7730 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 500 Mm Dia 7731 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 600 Mm Dia 7732 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 700 Mm Dia 7733 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 800 Mm Dia 7734 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 900 Mm Dia 7735 Ductile Iron Class K - 7 Pipe Conforming To I.S. 8329 - 1000 Mm Dia 7736 Extruded Burnt Flyash Clay Sewer Bricks Conforming To I.S. 4885 7737 Fly Ash Lime Bricks ( Falg Bricks ) Conforming To I.S. 12894 7738 Calcium Silicate Bricks Machine Moulded Confirming To I.S. 4139 7739 Modified Bitumen Refinery Produced Crmb - 55 7741 Modified Bitumen Refinery Produced Crmb - 60 Secure 7742 Bitumen Emulision Medium Setting ( M.S. ) Conforming To Is: 8887 7743 M.S. Pipe 150 Mm Dia Casing Pipe 7744 M.S. Pipe 200 Mm Dia Casing Pipe 7745 Pvc Blind Pipe 150 Mm Dia As Per Is: 12818 7746 Pvc Blind Pipe 200 Mm Dia As Pe Is: 12818 7747 M.S. Cap 150 Mm Dia 7748 M.S. Cap 200 Mm Dia 7749 M.S. Bail Plug 150 Mm Dia 7750 M.S. Bail Plug 200 Mm Dia 7751 Pvc Slotted Pipe 150 Mm Dia As Per Is: 12818 7752 Pvc Slotted Pipe 200 Mm Dia As Per Is: 12818 7753 Boulder 50 Mm To 200 Mm 7754 Gravel 5 Mm To 10 Mm 7755 Gravel 1.5 Mm To 2 Mm 7756 Gravel 3 Mm To 6 Mm 7757 M.S. Pipe 100 Mm Dia Casing Pipe 7758 Upvc Blind Pipe 100 Mm Dia As Per Is: 12818 7759 Upvc Slotted Pipe 100 Mm Dia As Per Is: 12818 7760 M.S. Cap 100 Mm Dia 7761 M.S. Bail Plug 100 Mm Dia 7762 Precast R.C.C. Perforated Slab 7763 Water Supply Tanker Of 5000 Litre Capacity 7764 M.S. Socket 100 Mm Dia 7765 M.S. Socket 150 Mm Dia 7766 M.S. Socket 200 Mm Dia 7767 Stone Cleaning Chemical Approved By Asi 7768 Water Epellent Chemical Approved By Asi 7769 Stone Surface Strengthening Chemical Approved By Asi 7770 Turpentine Oil 7771 Liquid Amonia 5% 7772 Pea Gravel 7773 Coloured Inter Locking C.C. Paver Block 7774 Stone Size 10X10x7.50Cm 7775 Sodium Pentachlorophenate 7800 Ceramic Glazed Tiles Ist Quality Minimum Thickness 5 Mm In All Colours Shades And Designs Except Burgundy, Bottle Green Black 7801 Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. 7802 Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades Designs Except White, Ivory, Fume Red Brown Etc. 7803 Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc 7804 Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs Except White, Ivory, Grey, Fume Red Brown Etc 7805 Salem Stainless Steel Aisi - 304 ( 18 / 8 ) Orrisa Pattern W.C. Pan 724 Mm X 578 Mm 7806 Salem Stainless Steel Aisi - 304 ( 18 / 8 ) Round Basin 405 Mm X 355 Mm 7807 Salem Stainless Steel Aisi - 304 ( 18 / 8 ) Wash Basin 530 Mm X 345 Mm 7808 Centrifugally Cast ( Spun ) Iron S&S 100 Mm Inlet And 100 Mm Outlet 7809 Centrifugally Cast ( Spun ) Iron S & S 100 Mm Inlet And 75 Mm Outlet 7850 Agaria White Marble Slab Plain 18 Mm Thick 7857 P.T.M.T. Grating Square Slit 150 Mm 7858 P.T.M.T. Urinal Cock 15 Mm Dia 7859 P.T.M.T. Bib Cock With Nozzle 15 Mm 7861 P.T.M.T. Stop Cock ( Concealed ) 15 Mm 7862 15 Mm Nominal Bore And 30 Cm Length Pvc Connection Pipe With P.T.M.T. Nuts 7863 15 Mm Nominal Bore And 45 Cm Length Pvc Connection Pipe With P.T.M.T. Nuts 7864 P.T.M.T. Extension Nipple 15 Mm Secure 7865 P.T.M.T. Extension Nipple 20 Mm 7866 P.T.M.T. Extension Nipple 25 Mm 7893 Tactile Tile 7895 Matt Finished Vitrified Tile 100X100 X16 Mm 7896 Vitrified Tile 7900 Modular Common Burnt Clay Bricks Of Class Designation 7.5 7901 Machine Moulded Perforated Common Burnt Clay Fps ( Non Modular ) Bricks Of Class Designation 12.5 7902 Machine Moulded Common Burnt Clay Modular Perforated Bricks Of Class Designation 12.5 7903 Machine Moulded Common Burnt Clay Fps ( Non Modular ) Bricks Of Class Designation 12.5 7904 Machine Moulded Common Burnt Clay Tile Bricks Of Class Designation 12.5 7911 Chemical Rust Remover 7912 Hire Charges Of Drill Machine Upto 30 Mm Dia 7913 Epoxy 7914 Sbr Polymer 7915 Woven Pvc Cloth 7916 Hire Charges Of Sand Blasting Equipment 7917 Hire Charges Of Compressure 7918 25 Mm Thick Cement Concrete Shotcrete ( Guniting ) With Compressor 7919 50 Mm Thick Cement Concrete Shotcrete ( Guniting ) With Compressor 7920 75 Mm Thick Cement Concrete Shotcrete ( Guniting ) With Compressor 7921 Adhesive Chemical 7922 Bit Of Drilling Machine For Hole Upto 30 Mm Dia 7923 Gi Injection Nipple 12Mm Dia, 75Mm Long 7924 Blowing Compressed Air For Cleaning Holes Upto 30Mm Dia 7925 L Shaped 100Mm Long, 10Mm Dia Mild Steel Shear Key 7926 Welding Charges Of Shear Key To Existing Reinforcement 7927 Acrylic Polymer Chemical For Cracks 7928 Hire Charges Of Plant And Machinery, It Can Inject - 350 Kg / Day 8001 24 Mm Thick Factory Made Shutters With Styles, Rails And Panels Of Pvc Extruded Sections In White, Grey Or Wooden Finish 8002 30 Mm Thick Factory Made Shutters With Styles, Rails And Panels Of Pvc Extruded Sections In White, Grey Or Wooden Finish 8003 Factory Made Pvc Rigid Foam Panelled Shutter I / C Carriage 8004 Factory Made Pvc Rigid Foam Panelled Shutter As Per Is: 4020 I / C Carriage 8006 Factory Made Pvc Rigid Foam Sheet 1 Mm Thick 8007 Factory Made Pvc Rigid Foam Sheet 5 Mm Thick 8008 Factory Made Prelaminated Pvc Rigid Foam Sheet 5 Mm Thick 8010 48 Mm X40 Mmx1.5 Mm Thick Factory Made Door Frame Of Pvc Extruded Sections In White, Grey Or Wooden Finish 8011 Factory Made Door Frame Pvc Extruded Sheet I / C Carriage 8012 Adhesive Solvent Cement 8013 Factory Made Eps Core Wallpanel / Roof Panel Sandwiched Between Two Engineered Welded Wire Fabric Mesh Of 3 Mm Dia G.I. Wire Mesh, With 50 Mm Pitch In Both The Directions, Kept At 120-135 Mm Gap And Interconnected By The Zig Zag G.I. Wire Of 3 Mm Dia At Alternate Row By Welding 8014 Factory Made Door Frame Size 50X47 Mm With Wall Thickness 5 Mm Made Of Single Piece Extruded Profile 8015 Expanded Poly Ethylene Foam Sheet 4 Mm Thick Of Density 40Kg / M3 8016 High Density Expanded Poly Ethylene ( Epe ) Foam 1Mm Thick 8017 Fire Rated Door Frame Made With 1.6 Mm Thick G.I Sheet ( 120 Minutes Fire Rating ) 8018 Fire Rated Door Shutter Made With 1.6 Mm Thick G.I Sheet ( 120 Minutes Fire Rating ) Including Hinges ( Without Glass Panels ) 8021 Bamboo Wood Tile Flooring 14Mm Thick Of Minimum Size 1800Mm X 130 Mm 8022 Bamboo Wood Quarter Round 18 Mm Thick Of Size 1900Mm X 18 Mm 8023 Bamboo Wood Door Reducer 14 Mm Thick Of Size 1900 Mm X 44Mm Secure 8024 Bamboo Wood Skirting 14Mm Thick Of Size 1900Mm X 85 Mm 8025 Bamboo Wood Tile Wall Cladding 10Mm Thick Of Size 1900Mm X 135Mm 8026 Bamboo Wood T-Mold 14Mm Thick Of Size 1900Mm X 44Mm 8027 Bamboo Wood Threshold 14Mm Thick Of Size 1900Mm X 44Mm 8028 Bamboo Wood Shutter Of Doors 8029 Bamboo Wood Panelling ( 10Mm Thick ) 8030 Superior Class Bamboo Wood Door Frame 65 Mm Thick 8031 Aluminium Sheets Grade 5052, 4 Mm Thick For Wall Panel / Deck Panel / Wrb Panel / Kicker Panels / Door Closing Panels ( For Form Work ) 8032 Aluminium Sheed Grad 5052, 4 Mm Thick For Internal Corner / Columns Corners / ( For Form Work ) 8033 Aluminium Sheets Grade 5052, 4 Mm Thick For Mid Soldier / End Soldier ( For Form Work ) 8034 External Corner 2050 Mm 8035 External Corner 825 Mm 8036 Soldier Tie 370 Mm 8037 Adjustable Prop-2.0X2.0 M 8038 Pin -50 8039 Pin - 127 8040 Wedge 8041 Wall Tie -150 ( 355 Mm 8042 Polythene Sleeve 90X150 Mm 8043 Polythene Rool - 150 Mm Long 8044 Vertical Soldier - 1100 Mm 8045 Wall Attchyed Bracket 600X100 Mm 8046 Allignment Pipe - 3.00 Mtr. 8047 Allignment Bracket 8048 Tie Rod Fr Bracket - 500 Mm 8049 Anchor Wing Nut 100 Mm 8050 Debit Pin - 250 Mm 8051 Pvc Pipe - 20 Mm -150 Mm Long 8052 Pvc Cone 8053 Bold+Nut - 16 X 80 Mm 8054 Flat Washer 16, 3 Mm Thick 8055 Bolt +Nut - 16 X30 Mm 8056 Door Spacer 45X45x5 -1135Mm Long 8057 Door Spacer 45X45x5x-985 Mm Long 8100 Powder Coated M.S. Butt Hinges 100 Mm X58 Mm X 1.9 Mm 8101 Ss Ball Bearing Of Sizw 100X89x3 Mm 8116 Zinc Alloy ( White Powder Coated ) 3D Hinges For Upvc Door 8117 Zinc Alloy ( White Powder Coated ) Handles With Zinc Plated Mild Steel Multi Point Locking Having Transmission Gear, Cylinder With Keeps And One Side Key For Upvc Casement Door 8118 Zinc Alloy ( White Powder Coated ) Handles Along With Zinc Plated Mild Steel Multi Point Locking Having Transmission Gear With Keeps For Upvc Sliding Window 8119 Zinc Alloy ( White Powder Coated ) Handles With Key Along With Zinc Plated Mild Steel Multi Point Locking Having Transmission Gear With Keeps For Upvc Sliding Door 8121 Upvc Extruded ( Small Series ) Casement Window Frame Size 47X50mm 8122 Upvc Extruded ( Small Series ) Casement Window Sash / Window Mullion Size 47X68mm 8125 Upvc Extruded Glazing Bead Of Appropriate Dimension For Small Series Casement Window Sash 8126 U Pvc Extruded ( Big Series ) Casement Window Frame Size 67X60mm 8127 U Pvc Extruded ( Big Series ) Casement Door Frame Size 67X60mm 8128 Upvc Extruded ( Big Series ) Casement Window Sash / Window Mullion / Door Mullion Size 67X80 Mm 8129 Upvc Extruded ( Big Series ) Casement Door Sash Size 67X11 Mm 8130 Upvc Extruded Glazing Bead Of Appropriate Dimension For Big Series Casemtne Window / Door Sash Secure 8131 Upvc Extruded Glazing Bead Of Appropriate Dimension For Small Series Sliding Window Sash 8132 Upvc Extruded Glazing Bead Of Appropriate Dimension For Big Series Of Sliding Window / Door Sash 8133 Upvc Extruded ( Small Series ) 2 Track Sliding Window Frame Size 52X44mm 8134 Upvc Extruded ( Big Series ) 2 Track Sliding Window / Door Frame Size 67X50 Mm 8135 Upvc Extruded ( Small Series ) 3 Track Sliding Window Frame Size 92X44 Mm 8136 Upvc Extruded ( Big Series ) 3 Track Sliding Window / Door Frame Size 116X45 Mm 8137 Upvc Extruded ( Small Series ) 2 Track Sliding Window Sash / 3 Track Sliding Window Sash Size 32X60 Mm 8138 Upvc Extruded ( Big Series ) 2 Track Sliding Window Sash Size 46X62 Mm 8139 Upvc Extruded ( Big Series ) 3 Track Sliding Window Sash Size 46X62 Mm 8140 Upvc Extruded Interlock Of Appropriate Dimension For Small Series Sliding Window Sash 8141 Upvc Extruded Interlock Of Appropriate Dimension For Small Series Sliding Window / Door Sash 8142 Upvc Extruded Inline Adaptor Or Appropriate Dimension For Big Series Sliding Window / Door Sash 8143 Upvc Extruded 2 Track Sliding Door Sash / 3 Track Sliding Door Sash ( Big Series ) Size 46X82 Mm 8200 A.P.P. Modified Polymeric Felt ( Two Layers ) 1.5 Mm Thick 8201 A.P.P. Modified Polymeric Felt ( Two Layers ) 2 Mm Thick 8203 A.P.P. Modified 2 Mm Thick Membrane Reinforced With Glass Fibre Matt 8204 A.P.P. Modified 3 Mm Thick Membrane Reinforced With Glass Fibre Matt 8205 A.P. Modified 3 Mm Thick Membrane Reinforced With Polyester Matt 8206 Bitumen Primer For Bitumen Membrane 8207 Geotextile 120 Gram Per Sqm Membrane 8210 Stainless Steel Screws 50 Mm 8211 Stainless Steel Screws 40 Mm 8212 Stainless Steel Screws 30 Mm 8214 Stainless Steel Screws 20 Mm 8215 Stainless Steel Butt Hinges 125X64x1.9 Mm Is: 12817 Marked 8216 Stainless Steel Butt Hinges 100X58x1.9 Mm Is : 12817 Marked 8217 Stainless Steel Butt Hinges 75X47x1.8 Mm Is : 12817 Marked 8218 Stainless Steel Butt Hinges 50X37x1.5 Mm Is : 12817 Marked 8219 Stainless Steel Butt Hinges ( Heavy Weight ) 125X64x2.5 Mm Is: 12817 Marked 8220 Stainless Steel Butt Hinges ( Heavy Weight ) 100X60x2.5 Mm Is : 12817 Marked 8221 Stainless Steel Butt Hinges ( Heavy Weight ) 75X50x2.5 Mm Is : 12817 Marked 8222 M.S. Heavy Weight Butt Hinges 125X90x4.0 Mm Is : 1341 Marked 8223 M.S. Heavy Weight Butt Hinges 100X75x3.5 Mm Is: 1341 Marked 8224 M.S. Heavy Weight Butt Hinges 75X60x3.1 Mm Is : 1341 Marked 8225 M.S. Heavy Weight Butt Hinges 50X40xx2.5 Mm Is : 1341 Marked 8226 Concealed Zinc Coated Hinges 19-20 Mm Thick With Mounting Plate 8300 1216 Mm Pe-Al-Pe Composite Pressure Pipe 8301 1620 Mm Pe-Al-Pe Composite Pressure Pipe 8302 2025 Mm Pe-Al-Pe Composite Pressure Pipe 8303 2532 Mm Pe-Al-Pe Composite Pressure Pipe 8304 3240 Mm Pe-Al-Pe Composite Pressure Pipe 8305 4050 Mm Pe-Al-Pe Composite Pressure Pipe 8500 Water For Jetting / Blowback 8501 Polymer Modified Cementation Coating 8502 Fibre Glass Cloth 8504 Multi Surface Paint 8505 Acrylic Exterior Paint 8506 Premium Arcylic Exterior Paint L Secure 8507 Textured Exterior Paint 8508 Primer For Cement Paint 8509 Special Primer ( C.W ) 8510 Metal Primer ( U.G. ) 8511 Fibre Reinforced Elastomeric Liquid Water Proofing Membrane 8512 Cementitious Water Proofing Coating With Elastic Polymers 8513 Acrylic Modified Resin Based Texture 8514 40 Mm Long S S Screws With Plastic Rawl Plugs 8515 Galavanised Ms 8 Mm Outer Diameter M-6 Dash Fastener 50 Mm Long 8552 Mineral Fibre Beveled Tegular Edged Ceiling Tiles 595X595 Mm, 16 Mm Thick 8553 Mineral Fibre Beveled Tegular Edged Ceiliing Tiles 595X595mm, 16 Mm Thick With Bio-Block Conforming To Iso 5 ( Class 100 ) Specifications 8554 Mineral Fiber Beveled Tegular Edged Ceiling Tiles 595X595mm, 20 Mm Thick 8555 G.I Main Runner 15X32 Mm Of 3000 Mm Length, 0.33 Thick 8556 G.I Cross-T 15X32 Mm Of 1200 Mm Length, 0.33 Mm Thick 8557 G.I. Cross Tee 15X32mm Of 600Mm Length, 0.33 Mm Thick 8558 G.I Hanger Rod 6Mm Dia Fully Threaded Upto 1000 Mm Length 8559 Stainless Steel U Channel Of Size ( 50X25x2 Mm ) 8560 Non Staining Water Resistant Clear Silicon 8561 Extruded Polystrene Rigid Insulation Board 50Mm Thick 8563 15 Mm Thick, Light Weight, Integral Densified Micro Look Edged, False Ceiling Tiles Of Size 595X595 Mm 8564 15 Mm Thick, Light Weight, Fully Perforated Square / Butt Edge Integral Densified, False Ceiling Tile Of Size 595X595 Mm 8565 Galavanised Ms Hanger Rod 6 Mm Dia Ms Fullly Threaded Up To 1000 Mm Length 8566 Powder Coated Steel Section Main-T Ceiling Sections 15X42x0.40 Mm ( 3000 Mm Long ) 8567 Galavanised Mild Steel Perimeter Wall Angle 22X19x0.40 Mm ( 3000 Mm Long ) 8568 Powder Coated Galvanised Iron Intermediate Cross-T Section 15X42x0.40 Mm ( 1200 Mm Long 8569 Powder Coated Galvanised Iron Intermediate Cross-T Section 15X42x0.40 Mm ( 600 Mm Long ) 8576 Crates Made Of Mesh Type 10X12 ( D=100Mm ) Zinc Coated ( Mash Wire Diameter 3.00 Mm ) 8577 Crates Made Of Mesh Type 10X12 ( D=100Mm ) Zn+Pvc Coated Mesh Wire Diameter 2.70 / 2.70 Mm ( Id / Od ) 8578 Crates Made Of Mesh Type 10X12 ( D=100Mm ) Zn+10% Al Alloy + Pvc Coated. Mesh Wire Diameter 2.70 / 3.70 Mm ( Id / Od ) 8579 Cold Form Light Gauge Steel C-Section Of Thickness 0.75 Mm I / C Zink Coating / Sliting Etc 8580 Wastage Of Cold Form Light Guage Steel 8581 12 Mm Thick Micro Tegular Edge Semi Perforated Grg ( Glass Fibre Reinforcemtn Gypsum ) False Ceiling Tiles Of Size 595X595 Mm 8582 12 Mm Thick Micro Tegular Edge Fully Perforated Grg ( Glass Fibre Reinforcemtn Gypsum ) False Ceiling Tiles Of Size 595X595 Mm 8583 10 Mm Thick Square Edge Fully Perforated Grg ( Glass Fibre Reinforcemtn Gypsum ) False Ceiling Tiles Of Size 595X595 Mm 8587 Galvanized Iron Intermediate Cross-T Section 15X32x0.33 Mm ( 600 Mm Long ) 8588 Galvanised Ms Hanger Road 6 Mm Dia Ms Fully Threaded Upto 1000 Mm Length 8589 Calcium Silicate Tegular Edged Celling Tiles 595X595 Mm And 15 Mm Thick 8590 Galvanised Steel Main Tee Ceiling Section Size 24 X 38 X 0.33 Mm ( 3 Metre Long ) 8591 Galvanised Steel Perimeter Wall Angle Size 24 X 24 0.40 Mm ( 3.00 Metre Long ) 8592 Galvanised Steel Intermediate Cross T Section Size 24 X 25 X 0.33 Mm ( 1.2 Metre Long ) 8593 Galvanised Steel Intermediate Cross T Section 24 X 25 X 0.33 ( 0.6 Metre Long ) 8594 Galvanised Steel Soffit Cleat Size 25X35x1.60 Mm Secure 8595 Wooden Screws With Plastic Rawl Plugs 35X8 Mm 8596 Galvanised Ms 8Mm Outer Diameter M-6 Dash Fastener 25 Mm Long 8597 Gi Metal Tile Clip In Plain Beveled Edge Global White Colour Tiles Of Size 600X600 Mm And 0.5 Mm Thick 8598 Gi Metal Tile Clip In Perforated Beveled Edge Global White Colour Tiles Of Size 600X600 Mm And 0.5 Mm Thick 8599 Gi Metal Tile Lay- In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm And 0.5 Mm Thick 8600 Gi Metal Tile Lay-In Perforated Tegular Edge Global White Color Tiles Of Size 595X595 Mm And 0.5 Mm Thick 8601 Pvc Laminated Gypsum Tiles ( Square Edge ) Of Size 595X595 Mm And 12.5 Mm Thick 8602 Gypsum Tiles Fully Perforated Square Edge Of Size 595X595 Mm And 12.5 Mm Thick 8604 Spring T-Section 24X34x0.45 Mm ( 3.00 Meter Long ) 8605 C Wall Angle Section 20X30x20x0.50 Mm ( 3.00 Meter Long ) 8606 Main C Carrier Size 10X38x10x0.70 Mm ( 3.00 Meter Long ) 8607 Spring T-Connector 8608 C Carrier Connector 8609 C Suspension Clip 8610 Wire Coupling Clip 8611 Main T Ceiling Sections 24X38x0.3 Mm ( 3 Metre Long ) 8612 Perimeter Wall Angle 24X24x0.3 Mm ( 3 Metre Long ) 8613 Intermediate Cross T-Section 24X25x0.3 Mm ( 1.2 Mtr Long ) 8614 Intermediate Cross - T Section 24X25x0.3 Mm ( 0.6 Mtr. Long ) 8615 Hanger Rod 4 Mm Thick 8616 Adjustment Clip 85X30x0.8 Mm 8617 Soffit Cleat ( Size 27X37x25x1.60 Mm ) 8618 Dash Fastener 6 Mm Dia 50 Mm Long 8619 Galvanised Ms L-Shaped Level Adjuster Of Size 85X25x2 Mm 8620 Vitrified Floor Tile 50X50 Cm 8621 Vitrified Floor Tile 60X60 Cm 8622 Vitrifies Floor Tile 80X80 Cm 8623 Vitrified Floor Tile 100X100 Cm 8624 Border Tiles 200X75 Mm Size 8625 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4 - 16 Mm Outer Dia 8626 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4 - 20 Mm Outer Dia 8627 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4 - 25 Mm Outer Dia 8628 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4 - 32 Mm Outer Dia 8629 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4 - 40 Mm Outer Dia 8630 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4 - 50 Mm Outer Dia 8631 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4 - 63 Mm Outer Dia 8632 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4 - 75 Mm Outer Dia 8633 Poly Propylene- Random - Co - Polymer ( Ppr ) Pipes Sdr 7.4- 90 Mm Outer Dia 8634 Poly Propylene - Random - Co- Polymer ( Ppr ) Pipes Sdr - 11-110 Mm Outer Dia 8635 Poly Propylene - Random - Co- Polymer ( Ppr ) Pipes Sdr - 11- 160 Mm Outer Dia 8636 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 15 Mm Outer Dia 8637 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 20 Mm Outer Dia 8638 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 25 Mm Outer Dia 8639 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 32 Mm Outer Dia 8640 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 40 Mm Outer Dia 8641 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 50 Mm Outer Dia Secure 8642 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 62.5 Inner Dia 8643 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 75 Mm Inner Dia 8644 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 100 Inner Dia 8645 Chlorinated Polyvinyl - Chloride ( Cpvc ) Pipe 150 Mm Inner Dia 8646 Silicon Sealant 8647 Stainless Steal Screws 30 X 4 Mm 8648 Hermetically Sealed Double Glazed Unit Made With 6 Mm Thick Clear Float Glass Both Side Having 12 Mm Air Gap 8649 Stainless Steel ( Ss 304 Grade ) Adjustable Friction Window Stay 205 X 19 Mm 8650 Stainless Steel ( S S 304 Grade ) Adjustable Friction Window Stay 255 X 19 Mm 8651 Stainless Steel ( S S 304 Grade ) Adjustable Friction Window Stay 355 X 19 Mm 8652 Stainless Steel ( S S 304 Grade ) Adjustable Friction Window Stay 510X 19 Mm 8653 Stainless Steel ( S S 304 Grade ) Adjustable Friction Window Stay 710X 19 Mm 8654 Masking Tape 8655 Autoclaved Aerated Cement ( Aac ) Blocks 8656 Gypsum Pannel 666 X 500 X 100 Mm Siz 8657 Bonding Plaster For Gypsum Panel 8659 Water Proof Ply 12 Mm Thick 8660 Aluminium Casement Window Fastener ( Anodised Ac 15 ) 8661 Aluminium Casement Window Fastener ( Powder Coated ) 8662 Aluminium Casement Window Fastener ( Polyester Powder Coated ) 8663 Aluminium Round Shape Handle ( Anodised Ac 15 ) 8664 Aluminium Round Shape Handle ( Powder Coated ) 8665 Aluminium Round Shape Handle ( Polyester Powder Coated ) 8666 Stainless Steel Screws 25 Mm X 4 Mm 8667 Uv Stabilised 2 Mm Thick Plain Frp Sheet 8668 Uv Stabilised 2 Mm Thick Corrugated Frp Sheet 8669 Mangalore Ridge Tiles 20 Mm Thick 8670 Mangalore Tiles 20 Mm Thcik 8671 Precoated Glavanished Iron Profile Sheet 0.50 Mm Tct 8672 Precoated Galvanised Steel Plain Ridges 8673 Precoated Galvanised Steel Flashings / Aprons 8674 Precoated Galvanised Steel Gutter 8675 Precoted Galvanised Steel North Light Curves 8676 Precoated Galvanised Steel Barge Board 8677 Precoated Galvanish Steel Crimp Curve 8678 I Mm Thick 35 Mm Wide Bright Finished Stainless Steel Piano Hinges 8682 Eposy Grout 8683 Red Sand Stone Gang Saw Cut 30 Mm Thick 8684 White Sand Stone Gang Saw Cut 30 Mm Thick 8685 Delineator 8686 Precast C.C. Kerb Stone M-25 8687 Thermoplastic Paint 8688 Glass Beads 8689 Interlocking C.C. Paver Block ( 60 Mm Thick, M-30 ) 8690 High Intensity Retro- Reflective Sheet 8691 Punched Tape Concertina Coil 600 M Dia . 10 M Openable Length ( Total Length 90 M ) 8692 Rbt Reinforced Barbed Wire 8693 Turn Buckle And Strengthening Bolt 8694 Precast Pavement Slab 450 X 450 X 50 Mm ( M- 30 ) 8695 Chain Link Fabric Fencing Mesh Of Size 50X50 Mm Made Of G.I. Wire Of Dia 4 Mm 8696 Chain Link Fabric Fencing Mesh Of Size 50X50 Mm Made Of G.I. Wire Of Dia Dia 4 Mm. Pvc Coated To Outer Dia 5 Mm Secure 8697 Chain Link Fabric Fencing Mesh Of Size 25X25 Mm Made Of G.I. Wire Of Dia 3 Mm 8698 Stainless Steel Cramps ( Weight 260 Grams ) With Nuts, Bolts And Washer For Dry Stone Cladding 8699 8 Mm Thick Tapered Edge Ccalcium Silicate Board 8700 10 Mm Thick Calcium Silicate Board 8701 Ss Pipe 304 Grades With Press Fit Technology As Per Jis 3448 Standard 48.60 Mm Outer Dia 8702 Coupling / Socket Fittings For 15.88 Mm Outer Dia Ss Pipe 8703 Telescopic Drawer Channels 300 Mm Long 8704 Stainless Steel Roller For Sliding Arrangement In Racks / Cupboards / Cabinets Shutter 8705 50 Mmx42 Mmx2 Mm Thick Factory Made Door Frame Of Pvc Extruded Sections In White, Grey Or Wooden Finish 8706 25 Mm Thick Factory Made Pvc Flush Door Shutter I / C Carriage 8707 Factory Made Glass Reinforced Plastic Door Frame 90X45 Mm I / C Carriage 8708 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I / C Carriage 8709 30 Mm Thick Factory Made Solid Pvc Profile Panelled Door Single Pipece Extruded Profile Decorative Finish ( Wood Grain Printed On Both Side ) 8710 Factory Made Solid Pvc Door Frame 60 X 32 Mm I / C Carriage 8711 28 Mm Factory Made Solid Pvc Panel Door Shutter I / C Carriage 8712 30 Mm Thick Factory Made Solid Pvc Profile Panelled Door Single Pipece Extruded Profile Non Decorative Finish 8713 Fiber Glass Reinforced Plastic Chajja 8714 Magnetic Catcher Triple Strip Vertical Type 8715 Magnetic Catcher Double Strip Horizontal Type 8716 100 Mm Mortice Lock With 6 Levers For Aluminium Door 8717 12.5 Mm Thick Glass Fibre Reinforced Gypsum Board 8719 2Nd Class Teak Wood Lipping / Moulded Beading Or Taj Beading Of Size 18X5 Mm 8720 Ceiling Sections 0.55 Mm Thick Having A Knurled Web Of 51.55 Mm And Two Flanges Of 26 Mm Each With Lips Of 10.55 Mm 8721 Perimeter Channel Having One Flange Of 20 Mm And Another Flange Of 30 Mm With Thickness Of 0.55 Mm And Web Of Length 27 Mm 8722 Nylon Sleeve & Wooden Screws ( 40 Mm ) 8723 Counter Sunk Ribbed Head Screw 25 8724 12 Mm Thick Marine Plywood Conforning Is: 710 8725 12 Mm Thick Fire Retardant Plywood Conforming To Is: 5509 8726 1.5 Mm Thick Decorative Laminated Sheet 8727 1.0 Mm Thick Decorative Laminated Sheet 8730 30 Mm Thick Factory Made Glass Fiber Reinforced Pllastic Flush Door Shutte I / C Carriage 8731 High Polymer Modified Quickset Tile Adhesive 8732 Synthetic Polyster Traingular Fibre Of Length 12 Mm, Effective Diameter 10.40 Microns And Specific Gravity Of 1.34 To 1.40 8733 Synthetic Ployster Triangular Fibre Of Length 6 Mm, Effective Diameter 10- 40 Microns And Specific Gravity Of 1.34 To 1.40 8734 P.V.C. Single Piece Extruded Door Frame Of Profile Size 50 Mm X 47 Mm With Wall Thickness Of 5 Mm 8735 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Non Decorative Finished ( Matt Finished ) 8736 35 Mm Thick Factory Made Solid Panel Pvc Door Shutter Of Single Piece Extruded Profile Decorative Finished ( Wood Grain Finished ) 8737 Stainless Steel Wire Guage ( Grade-304 ) Aperture 1.4 Mm And 0.50 Mm Dia Wire 8738 Facrory Made Door Frame Fire Rated ( 60 Minutes ) Made With 16 Swg G. Sheet Of Section 143 Mm X 57 Mm Duly Filled With Vermuculite Based Concrete Mix 8739 Fire Rated Door Shuttere Made With 16 Swg G.I. Sheet ( 60 Minutes ) Without Panel 8740 Fire Seal Putty 8741 Clear Fire Resistant Glass Panes 6 Mm Thick ( 60 Minutes ) 8742 G.I.U Beading 16 Swg G.I. Sheet ( Zinc Coating >120Gm / M2 ) With Ceramic Tape Of Suitable Thickness And Fire Resistant Primer Coating Secure 8743 Matrix Mineral Board 8744 Panic Bar / Latch ( Double Point ) 8745 65 Mm X 55 Mm X 2 Mm Thick Factory Made Door Frame Of Pvc Extruded Section In White Grey Or Wooden Finish 8746 37 Mm Thick Factory Made Shutter With Style, Rails And Panels Of Pvc Extruded Section In White Or Grey Finish I / C Carriage 8747 75 Mm X 53 Mm X 2.0 Mm Thick Factory Made Door Frame Of Pvc Extruded Section In White, Grey Or Wooden Finish 8748 37 Mm Thick Factory Made Fusion Welded Shutter With Style, Rails And Panels Of Pvc Extruded Section In Wooden Finish 8749 Zinc Alloy ( White Powder Coated ) Touch Lock With Hook For Wire Mesh Shutter 8750 Zinc Alloy ( White Powder Coated ) Casement Handle For Upvc Windows 8751 Zinc Alloy ( White Powder Coated ) Touch Lock For Upvc Windows For Upvc Windows 8752 Zinc Alloy Rollers For Upvc Windows 8753 Zinc Alloy Rollers For Upvc Door 8754 Zinc Alloy ( White Powder Coated ) Casement Lock For Upvc Windows 8755 Stainless Steel Friction Hinge Of Size 200 Mm X 19 X 1.9 Mm For Upvc Windows 8756 Stainless Steel Friction Hinge Of Size 250 Mm X 19 X 1.9 Mm For Upvc Windows 8757 Stainless Steel Friction Hinge Of Size 300 Mm X 19 X 1.9 Mm For Upvc Windows 8758 Stainless Steel Friction Hinge Of Size 350 Mm X 19 X 1.9 Mm For Upvc Windows 8759 Stainless Steel Friction Hinge Of Size 400 Mm X 19 X 1.9 Mm For Upvc Windows 8760 Upvc Extruded Profile Casement Window Frame ( 50 Mm X 50 Mm ) 8761 Upvc Extruded Profile Casement Window Sash ( Style And Rail ) ( 62 Mm X 34 Mm ) 8762 Upvc Extruded Profile Casement Window Mullion ( Intermediate Section ( 66 Mm X 50 Mm 8763 Upvc Extruded Profile Casement Window T Profile ( One Vertical Length In Between Two Shutters ) ( 24 Mm X 34.5 Mm ) 8764 Upvc Extruded Profile Casement Window Glazing Bead ( 12 Mm X 18 Mm ) 8765 Upvc Extruded Profile Casement Window Frame ( 67 X 62 Mm ) 8766 Upvc Extruded Profile Casement Window Sash / Mullion ( 67 Mm X 75 Mm ) ( Style, Rail And Intermediate Section ) 8767 Upvc Extruded Profile Casement Window Glazing Bead ( 35 Mm X 18 Mm ) 8768 Upvc Extruded Profile Two Track Sliding Frame ( 67 Mm X 52 Mm ) 8769 Upvc Extruded Profile Sliding Window Sash ( 60 Mm X 44 ) 8770 Upvc Extruded Profile Sliding Interlock For Window ( One Vertical Length ) In Each Shutter ) ( 45.5 Mm X 28 Mm ) 8771 Upvc Extruded Profile Sliding Door Sash ( 80 Mm X 44 Mm ) 8772 Aluminium Track On Bottom Rail For Upvc Window 8773 Wool Pine For Upvc Window 8774 Aluminium Grill 8775 Steel Galvanised Tubular Reinforcement For Upvc Door / Window 8776 Stainless Steel Dash Fastener Of 8 Mm Dia And 75 Mm Long Bolt 8777 Gi Fastener 100X8 Mm 8778 Toughened Glass 12 Mm Thickness 8779 Ss Pipe 304 Grades With Press Fit Technology As Per Jis 3448 Standard 15.88 Mm Outer Dia 8780 Ss Pipe 304 Grades With Press Fit Technology As Per Jis 3448 Standard 22.22 Mm Outer Dia 8781 Ss Pipe 304 Grades With Press Fit Technology As Per Jis 3448 Standard 28.58 Mm Outer Dia 8782 Ss Pipe 304 Grades With Press Fit Technology As Per Jis 3448 Standard 34.00 Mm Outer Dia 8783 Ss Pipe 304 Grades With Press Fit Technology As Per Jis 3448 Standard 42.70 Mm Outer Dia 8784 8 Mm Thick Calcium Silicate Perforated Tiles Of Size 595 X595 Mm 8785 Interlocking C.C. Paver Block ( 80 Mm Thick, M-30 ) Secure 8786 Coupling / Socket Fittings For 22.22 Mm Outer Dia Ss Pipe 8787 Coupling / Socket Fittings For 28.58 Mm Outer Dia Ss Pipe 8788 Coupling / Socket Fittings For 34.00 Mm Outer Dia Ss Pipe 8789 Coupling / Socket Fittings For 42.70 Mm Outer Dia Ss Pipe 8790 Coupling / Socket Fittings For 48.60 Mm Outer Dia Ss Pipe 8791 Reducer For 22.22 Mm X 15.88 Mm Outer Dia Ss Pipe 8792 Reducer For 28.58 Mm X 15.88 Mm Outer Dia Ss Pipe 8793 Reducer For 28.58 Mm X 22.22 Mm Outer Dia Ss Pipe 8794 Reducer For 34.00 Mm X 15.88 Mm Outer Dia Ss Pipe 8795 Reducer For 34.00 Mm X 22.22 Mm Outer Dia Ss Pipe 8796 Reducer For 34.00 Mm X 28.58 Mm Outer Dia Ss Pipe 8797 Reducer For 42.70 Mm X 15.88 Mm Outer Dia Ss Pipe 8798 Reducer For 42.70 Mm X 22.22 Mm Outer Dia Ss Pipe 8799 Reducer For 42.70 Mm X 28.58 Mm Outer Dia Ss Pipe 8800 Reducer For 48.60 Mm X 15.88 Mm Outer Dia Ss Pipe 8801 Reducer For 42.70 Mm X 34.00 Mm Outer Dia Ss Pipe 8802 Reducer For 48.60 Mm X 22.22 Mm Outer Dia Ss Pipe 8803 Reducer For 48.60 Mm X 28.58 Mm Outer Dia Ss Pipe 8804 Reducer For 48.60 Mm X 34.00 Mm Outer Dia Ss Pipe 8805 Reducer For48.60 Mm X 42.70 Mm Outer Dia Ss Pipe 8806 Slip Coupling / Socket 15.88 Mm Outer Dia Ss Pipe 8807 Slip Coupling / Socket 22.22 Mm Outer Dia Ss Pipe 8808 Slip Coupling / Socket 28.58 Mm Outer Dia Ss Pipe 8809 Slip Coupling / Socket 34.00 Mm Outer Dia Ss Pipe 8810 Slip Coupling / Socket 42.70 Mm Outer Dia Ss Pipe 8811 Slip Coupling / Socket 48.60 Mm Outer Dia Ss Pipe 8812 Elbow 90O For 15.88 Mm Outer Dia Ss Pipe 8813 Elbow 90O For 22.22 Mm Outer Dia Ss Pipe 8814 Elbow 90O For 28.58 Mm Outer Dia Ss Pipe 8815 Elbow 90O For 34.00 Mm Outer Dia Ss Pipe 8816 Elbow 90O For 42.70 Mm Outer Dia Ss Pipe 8817 Elbow 90O For 48.60 Mm Outer Dia Ss Pipe 8818 Reducing Elbow 90O For 22.22 Mm X 15.88 Mm Outer Dia Ss Pipe 8819 Reducing Elbow 90O For 28.58 Mm X 15.88 Mm Outer Dia Ss Pipe 8820 Reducing Elbow 90O For 28.58 Mm X 22.22 Mm Outer Dia Ss Pipe 8821 Reducing Elbow 90O For 34.00 Mm X 22.22 Mm Outer Dia Ss Pipe 8822 Reducing Elbow 90O For 34.00 Mm X 28.58 Mm Outer Dia Ss Pipe 8823 Reducing Elbow 90O For 42.70 Mm X 34.00 Mm Outer Dia Ss Pipe 8824 Equal Tee For 15.88 Mm Outer Dia Ss Pipe 8825 Equal Tee For 22.22 Mm Outer Dia Ss Pipe 8826 Equal Tee For 28.58 Mm Outer Dia Ss Pipe 8827 Equal Tee For 34.00 Mm Outer Dia Ss Pipe 8828 Equal Tee For 42.70 Mm Outer Dia Ss Pipe 8829 Equal Tee For 48.60 Mm Outer Dia Ss Pipe 8830 Reducing Tee For 22.22 Mm X 15.88 Mm Outer Dia Ss Pipe 8831 Reducing Tee For 28.58 Mm X 15.88 Mm Outer Dia Ss Pipe 8832 Reducing Tee For 28.58 Mm X 22.22 Mm Outer Dia Ss Pipe 8833 Reducing Tee For 34.00 Mm X 15.88 Mm Outer Dia Ss Pipe 8834 Reducing Tee For 34.00 Mm X 22.22 Mm Outer Dia Ss Pipe 8835 Reducing Tee For 34.00 Mm X 28.58 Mm Outer Dia Ss Pipe 8836 Reducing Tee For 42.70 Mm X 15.88 Mm Outer Dia Ss Pipe 8837 Reducing Tee For 42.70 Mm X 22.22 Mm Outer Dia Ss Pipe 8838 Reducing Tee For 42.70 Mm X 28.58 Mm Outer Dia Ss Pipe 8839 Reducing Tee For 42.70 Mm X 34.00 Mm Outer Dia Ss Pipe 8840 Reducing Tee For 48.60 Mm X 15.88 Mm Outer Dia Ss Pipe 8841 Reducing Tee For 48.60 Mm X 22.22 Mm Outer Dia Ss Pipe 8842 Reducing Tee For 48.60 Mm X 28.58 Mm Outer Dia Ss Pipe 8843 Reducing Tee For 48.60Mm X 34.00 Mm Outer Dia Ss Pipe Secure 8844 Reducing Tee For 48.60Mm X 42.70Mm Outer Dia Ss Pipe 8845 Male Thread Tee For 15.88 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8846 Male Thread Tee For 22.22 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8847 Male Thread Tee For 22.22 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8848 Male Thread Tee For 28.58 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8849 Stainless Steel Male Thread Tee For 28.58 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8850 Stainless Steel Male Thread Tee For 28.58 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8851 Male Thread Tee For 34.00 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8852 Male Thread Tee For 34.00 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8853 Male Thread Tee For 34.00 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8854 Male Thread Tee For 34.00 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8855 Male Thread Tee For 42.70 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8856 Male Thread Tee For 42.70 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8857 Male Thread Tee For 42.70 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8858 Male Thread Tee For 42.70 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8859 Male Thread Tee For 42.70 Mm Outer Dia X 40 Mm Nominal Dia Threaded 8860 Male Thread Tee For 48.60 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8861 Male Thread Tee For 48.60 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8862 Male Thread Tee For 48.60 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8863 Male Thread Tee For 48.60 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8864 Male Thread Tee For 48.60 Mm Outer Dia X 40 Mm Nominal Dia Threaded 8865 Male Thread Tee For 48.60 Mm Outer Dia X 50 Mm Nominal Dia Threaded 8866 Female Thread Tee For 15.88 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8867 Female Thread Tee For 22.22 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8868 Female Thread Tee For 22.22 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8869 Female Thread Tee For 28.58 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8870 Female Thread Tee For 28.58 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8871 Female Thread Tee For 28.58 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8872 Female Thread Tee For 34.00 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8873 Female Thread Tee For 34.00 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8874 Female Thread Tee For 34.00 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8875 Female Thread Tee For 34.00 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8876 Female Thread Tee For 42.70 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8877 Female Thread Tee For 42.70 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8878 Female Thread Tee For 42.70 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8879 Female Thread Tee For 42.70 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8880 Female Thread Tee For 42.70 Mm Outer Dia X 40 Mm Nominal Dia Threaded 8881 Female Thread Tee For 48.60 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8882 Female Thread Tee For 48.60 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8883 Female Thread Tee For 48.60 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8884 Female Thread Tee For 48.60 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8885 Female Thread Tee For 48.60 Mm Outer Dia X 40 Mm Nominal Dia Threaded Secure 8886 Female Thread Tee For 48.60 Mm Outer Dia X 50 Mm Nominal Dia Threaded 8887 Female Threaded Connector / Adapter For 15.88 Mm Outer Dia X 15 Mm Nominal Threaded 8888 Female Threaded Connector / Adapter For 22.22 Mm Outer Dia X 15 Mm Nominal Threaded 8889 Female Threaded Connector / Adapter For 22.22 Mm Outer Dia X 20 Mm Nominal Threaded 8890 Female Threaded Connector / Adapter For 28.58 Mm Outer Dia X 15 Mm Nominal Threaded 8891 Female Threaded Connector / Adapter For 28.58 Mm Outer Dia X 20 Mm Nominal Threaded 8892 Female Threaded Connector / Adapter For 28.58 Mm Outer Dia X 25 Mm Nominal Threaded 8893 Female Threaded Connector / Adapter For 34.00 Mm Outer Dia X 25 Mm Nominal Threaded 8894 Female Threaded Connector / Adapter For 34.00 Mm Outer Dia X 32 Mm Nominal Threaded 8895 Female Threaded Connector / Adapter For 42.70 Mm Outer Dia X 32 Mm Nominal Threaded 8896 Female Threaded Connector / Adapter For 42.70 Mm Outer Dia X 40 Mm Nominal Threaded 8897 Female Threaded Connector / Adapter For 48.60 Mm Outer Dia X 40 Mm Nominal Threaded 8898 Female Threaded Connector / Adapter For 48.60 Mm Outer Dia X 50 Mm Nominal Threaded 8899 Male Threaded Connector / Adapter For 15.88 Mm Outer Dia X 15 Mm Nominal Threaded 8900 Male Threaded Connector / Adapter For 22.22 Mm Outer Dia X 15 Mm Nominal Threaded 8901 Male Threaded Connector / Adapter For 22.22 Mm Outer Dia X 20 Mm Nominal Threaded 8902 Male Threaded Connector / Adapter For 28.58 Mm Outer Dia X 20 Mm Nominal Threaded 8903 Male Threaded Connector / Adapter For 28.58 Mm Outer Dia X 25 Mm Nominal Threaded 8904 Male Threaded Connector / Adapter For 34.00 Mm Outer Dia X 25 Mm Nominal Threaded 8905 Male Threaded Connector / Adapter For 34.00 Mm Outer Dia X 32 Mm Nominal Threaded 8906 Male Threaded Connector / Adapter For 42.70 Mm Outer Dia X 32 Mm Nominal Threaded 8907 Male Threaded Connector / Adapter For 42.70 Mm Outer Dia X 40 Mm Nominal Threaded 8908 Male Threaded Connector / Adapter For 48.60 Mm Outer Dia X 40 Mm Nominal Threaded 8909 Male Threaded Connector / Adapter For 48.60 Mm Outer Dia X 50 Mm Nominal Threaded 8910 Valve Connector For 15.88 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8911 Valve Connector For 22.22 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8912 Valve Connector For 22.22 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8913 Valve Connector For 28.58 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8914 Valve Connector For 34.00 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8915 Valve Connector For 42.70 Mm Outer Dia X 40 Mm Nominal Dia Threaded 8916 Valve Connector For 48.60 Mm Outer Dia X 50 Mm Nominal Dia Threaded 8917 Female Threaded Elbow 90O For 15.88 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8918 Female Threaded Elbow 90O For 22.22 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8919 Female Threaded Elbow 90O For 22.22 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8920 Female Threaded Elbow 90O For 28.58 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8921 Female Threaded Elbow 90O For 34.00 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8922 Female Threaded Elbow 90O For 42.70 Mm Outer Dia X 32 Mm Nominal Dia Threaded Secure 8923 Female Threaded Elbow 90O For 42.70 Mm Outer Dia X40 Mm Nominal Dia Threaded 8924 Female Threaded Elbow 90O For 48.60 Mm Outer Dia X 40 Mm Nominal Dia Threaded 8925 Female Threaded Elbow 90O For 48.60 Mm Outer Dia X 50 Mm Nominal Dia Threaded 8926 Male Threaded Elbow 90O For 15.88 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8927 Male Threaded Elbow 90O For 22.22 Mm Outer Dia X 15 Mm Nominal Dia Threaded 8928 Male Threaded Elbow 90O For 22.22 Mm Outer Dia X 20 Mm Nominal Dia Threaded 8929 Male Threaded Elbow 90O For 28.58 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8930 Malethreaded Elbow 90O For 34.00 Mm Outer Dia X 25 Mm Nominal Dia Threaded 8931 Male Threaded Elbow 90O For 34.00 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8932 Male Threaded Elbow 90O For 42.70 Mm Outer Dia X 32 Mm Nominal Dia Threaded 8933 Male Threaded Elbow 90O For 42.70 Mm Outer Dia X40 Mm Nominal Dia Threaded 8934 Male Threaded Elbow 90O For 48.60 Mm Outer Dia X 40 Mm Nominal Dia Threaded 8935 Male Threaded Elbow 90O For 48.60 Mm Outer Dia X 50 Mm Nominal Dia Threaded 8936 Cap For 15.88 Mm Outer Dia Pipe 8937 Cap For 22.22 Mm Outer Dia Pipe 8938 Cap For 28.58 Mm Outer Dia Pipe 8939 Cap For 34.00 Mm Outer Dia Pipe 8940 Cap For 42.70 Mm Outer Dia Pipe 8941 Cap For 48.60 Mm Outer Dia Pipe 8942 Pipe Bridge For 15.88 Mm Outer Dia Pipe 8943 Pipe Bridge For 15.88 Mm Outer Dia Pipe 8944 Pipe Bridge For 28.58 Mm Outer Dia Pipe 8945 4 Point Facade Glass Bracket 8946 2 Point Facade Glass Bracket 8947 1 Point Facade Glass Bracket 8948 Flate Head Bolt 8949 400 Fin Plate At Top 8953 Micro Silica 8954 Stop End Tubes For Diaphragmwall 600 Mm Dia. 8955 Driving End Tubes For Diaphragm Wall 600 Mm Dia. 8956 Bi-Axial Extruded Geogrid Of Minimum Tensile Strength 15 Kn / M In The Longitudinal And Transverse Direction 8957 Bi-Axial Extruded Geogrid Of Minimum Tensile Strength 20 Kn / M In The Longitudinal And Transverse Direction 8958 Bi-Axial Extruded Geogrid Of Minimum Tensile Strength 30 Kn / M In The Longitudinal And Transverse Direction 8959 Bi-Axial Extruded Geogrid Of Minimum Tensile Strength 40 Kn / M In The Longitudinal And Transverse Direction 8960 Geosynthetic Drainage With Two Filtering Nonwoven Geotextiles Having A W Configuration As Longitudinal Parallel Channels. Minimum Thickness To Be 7.2 Mm, With Two Filtering Uv Stabilized Polypropylene Nonwoven Geotextile Of Minimum Thickness Of 0.75Mm Having Pores Of 150 Micron And Tensile Strength Of 8.0 Kn / M And Having Plane Flow Capacity Of 2.1 L / ( M.S ) At Hydraulic Gradient Of 1.0 & 20Kpa Pressure Tensile Strength Of 18Kn / M With Mass Per Unit Area Of 740 Gsm 8961 Geosynthetic Drainage Composite Havign Thermobonding A Draining Core -Hdpe Geonet Comprise To Two Set Of Parallel Overlyed Ribs Integrally Connected To Have A Rhomboidal Shape With Polyethylene Film And A Non Woven Geotextile Having Mass Per Unit Are 130G / M2 And Tensile Strength Of 8.0 Kn / M Having A Plane Flow Capacity Of 0.7 L / ( M.S ) At Hydraulic Gradient Of 1.0 & 20 Kpa Pressure And Tensile Stength Of 13.5 Kn / M, With Mass Per Unit Are Of 830 Gsm 8962 Synthetic Geogrid Having Ultimate Tensile Strength - 100Kn / M 8963 Synthetic Geogrid Ultimate Tensile Strength - 150Kn / M 8964 Synthetic Geogrid Ultimate Tensile Strength - 200Kn / M 8965 Synthetic Geogrid Ultimate Tensile Strength - 250Kn / M 8966 Synthetic Geogrid Ultimate Tensile Strength - 300Kn / M 8967 Synthetic Geogrid Ultimate Tensile Strength - 350Kn / M 8968 Synthetic Geogrid Ultimate Tensile Strength - 400Kn / M 8969 Synthetic Geogrid Ultimate Tensile Strength - 500Kn / M 8970 Synthetic Geogrid Ultimate Tensile Strength - 600Kn / M 8971 Synthetic Geogrid Ultimate Tensile Strength - 700Kn / M 8972 Synthetic Geogrid Ultimate Tensile Strength - 800Kn / M 8973 Synthetic Geogrid Ultimate Tensile Strength - 900Kn / M 8974 Synthetic Geogrid Ultimate Tensile Strength - 1000Kn / M 8975 Synthetic Geogrid Ultimate Tensile Strength - 1100Kn / M 8976 Synthetic Geogrid Ultimate Tensile Strength - 1200Kn / M 8977 Aluminium Profile Industrial Troughed Sheet Of Alloy 31500 / 31000 / 40800, Conforming To Is 1254, Is 737, Is 2676, 0.71 Mm Thick, The Profile Detail Width 1044 / 920 Mm, Cover Width 1000 / 875 Mm 8978 Aluminium Profile Industrial Troughed Sheet Of Alloy 31500 / 31000 / 40800 Conforming To Is 1254, Is 737, Is 2676, 0.91 Mm Thick, The Profile Detail Width 1044 / 920 Mm, Cover Width 1000 / 875 Mm 9001 C.P Brass Centre Hole Basin Mixer With Cast Spout 9007 C.P. Brass Centre Hole Basin Mixer With Cast Spout ( Kigston / Marc / Prima / Parko / Hindware 9950 Petrol Liter 56.61 9977 Carriage 9988 Carriage And Sundries 9999 Sundries 99993 Premise 30.50% 1P 99994 G I Wire
Contract Date: Sep 30, 2022 Contract Value : 99.00 Lakh
Local Bodies No of Bidders 4
TenderDetail
Loading tenders