View Bid Results For Networking Component Tenders

We found 369 Bid Results related to networking component tenders. You can find Contractor details who won networking component tenders along with contract details in Bid awards announcements section.

Indian Tenders
11
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
300
44
25
Tender Publishing Platform
130
239
State / UT
30
60
37
36
33
29
24
19
17
16
13
12
9
8
7
6
6
5
5
5
4
4
3
2
2
2
1
1
1
1
1
Contract Value
84
104
116
63
Publish Date
0
0
0
0
0
Sector
26
67
56
40
39
26
25
14
14
11
10
9
9
8
7
6
5
5
3
3
2
2
2
2
1
1
1
Ownership
6
169
83
80
34
1
1
Within keyword
Active filters:
Showing 1–8 of 369 tenders matching your filters
1.
Drinking Water Supply and Sanitation #11440764 Technical Bid
It Component And Other Works Of Truck Terminal At Panjapur; 1 SECTION 1.00 ELECTRICAL PANAL 2 MV panel - 1 Incomer-630A4PMCCBOutgoing-200ATPNMCCB-2 Nos,160 A TPN MCCB-1 Nos, 100 A TPN MCCB-2 Nos,40A TPN MCCB -3 Nos, ALUMINUM BUS, POWDER COATED ENCLOSER, R,Y, B INDICATION, MFM, (MCCB-L&T & ABB, Accessories – Reputed Make) 3 MV panel - 2 Incomer-630A4PMCCBOutgoing-400ATPNMCCB-1 Nos,160A TPN MCCB-3 Nos,,100A TPN MCCB-2 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER , R,Y,B INDICATION, MFM, (MCCB-L&T & ABB, Accessories –Reputed Make) 4 ACCP-1,6STAGEAPFCPANEL75KVAR,ALUMINUM BUS, POWDER COATED REPUTED BRAND (MCCB, MCB,POWER CONTACTOR - L&T & ABB, Capacitor and APFC relay–Reputed Make) 5 Commercial block –GROUND FLOOR Incomer: 200A 4 P MCCB -1 nos Outgoing-10a sp mcb+elcb+32a fuse carrier+ meter compartment- 24nos 32a sp mcb+elcb+32a fusecarrier+metercompartment-4nos(MCCB& ELCB,MCB - L&T & ABB, Accessories –Reputed Make) 6 Commercial block -1ST FLOOR Incomer: 125A 4 P MCCB -1 nos Outgoing-10a sp mcb+elcb+32a fuse carrier+ meter compartment- 10nos 32a sp mcb+elcb+32a fusecarrier+metercompartment-6nos(MCCB& ELCB,MCB - L&T & ABB, Accessories –Reputed Make) 7 UTILITYPANELCommercialblockIncomer:160A4P MCCB -1 nos Outgoing:100A TPN MCCB-2 Nos, 40A TPN MCB -2 Nos, 40A DP MCB -1 Nos, ALUMINUM BUS,POWDERCOATEDENCLOSER(MCCB&,MCB- L&T & ABB, Accessories – Reputed Make) 8 UTILITY PANEL – DORMITORY BLOCK Incomer: 400A 4 PMCCB-1nosOutgoing:160ATPNMCCB-4Nos,100A TPNMCCB-5Nos,63ATPNMCCB-3Nos,ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 9 EXTERNALLIGHTINGPANEL-1Incomer:160ATPN MCCB -1 nos Outgoing:63A TPN MCB-5 Nos,32A DP MCB -3 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 10 EXTERNALLIGHTINGPANEL-2Incomer:160ATPN MCCB-1nosOutgoing:63ATPNMCB-3Nos,32ADP MCB-2Nos,ALUMINUMBUS,POWDERCOATED ENCLOSER(MCCB-L&T&ABB,Accessories–Reputed Make) 11 SUB LT PANEL DORMITORY BLOCK Incomer: 160A 4P MCCB -1 nos Outgoing:40A TPN MCB-5 Nos,40A DP MCB -5 Nos, ALUMINUM BUS,POWDER COATED ENCLOSER (MCCB-L&T & ABB, Accessories –Reputed Make) 12 LIFTPANELIncomer:100ATPNMCCB-1nos Outgoing:100A TPN MCCB-1 Nos,6A SP MCB -3 Nos,16A SPMCB-3Nos,ALUMINUMBUS,POWDERCOATED ENCLOSER(MCCB-L&T&ABB,Accessories–Reputed Make) 13 HV METRING PANEL 630A 11KV OUTDOOR TYPE VCB SP PANEL WITH CT, PT FOR MEASUREMENT AND PROTECTION 14 11KV VCB 3 phase PANEL LINE UP OUTDOOR 1 INCOME, 2 OUTGOING 15 LTISOLATOR630A4PISOLATORPANELOUTDOOR TYPE 16 Supply, errection, testing and commissioning of 11 KV, 25 KA,630A,HTOutdoorThreePanelRingMainGear complete 17 Supply, errection, testing and commissioning of Fire FightingElectricalControlPanelof15HP,415V,50Hz RatingWallMountedTypefabricatedusingCRCAsheet, hinged lockable door, dust and vermin proof with following provisions:Supply, errection, testing and commissioning of Fire Fighting ElectricalControlPanelof15HP,415V,50HzRating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions: a. 63 Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set b. R, Y, B Phase Indication Lamp, Volt Meter (0 - 500 V), Ammeter (0 - 50 A), Volt Meter Selector Switch- 1 set c. 32 Amps Power Contactor with 230 V Coil, 14 - 23 Amps Over Load Relay - 1 set d. Single Phase Preventer - 1 No. e. Indication Lamp for Motor ON / OFF / TRIP - 1 set f. AUTO / MANUAL Selector Switch, ON / OFF Push Button - 1 set g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover The above panel mounted on wall using anchor fasteners 18 SECTION 2.00 EARTHEN ROD 19 5 Mtr depth for each earth pit which includes 40mm dia GI Pipe,25X5mmCopperStrips,andcopperearthplateof size 125mm x 50mm x 6mm 20 SECTION 3.00 PUDDLE FLANGE 21 Supply, delivery and fixing following puddle flange including cost of materials and following charges etc. complete. As directed by the departmental officers. 22 50NB x 600mm Pipe L one side Flange & Plate GI 23 65NB x 600mm Pipe L one side Flange & Plate GI 24 80NB x 600mm Pipe L one side Flange & Plate GI 25 100NB x 600mm Pipe L one side Flange & Plate GI 26 200NB x 600mm Pipe L one side Flange & Plate GI 27 80NB x 600mm Pipe L one side Flange, One side thread & Plate GI 28 100NB x 600mm Pipe L one side Flange, One side thread & Plate GI 29 150NB x 600mm Pipe L one side Flange, One side thread & Plate GI 30 300NB x 600mm Pipe L one side Flange, One side thread & Plate GI 31 SECTION 4.00 LANDSCAPING 32 SUPPLY AND FIXING THE MEXICAN CARPET / KORIEN LAWN : New Soil preparation like root regulators, vermin, DAP compost, pest control, weeds control, water irrigation and laid with Mexican carpet lawn. 33 PlantingofDurantanewgoldPlantornamentalfoliage shrub variety of height 30-45cm in polythene bagof size 6x7inchincludingloadingandunloadingcharges, transportation,stackingofsaplingsatsite,earthwork excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 34 supply and fixing ofDuranda Gold (Large) including All charge etc compleded 35 Supplying and Planting of Hibiscus tilliaceus tree sapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation,stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the deparment incharge 36 supply and fixing of Exora including transport including all charge etc 37 supply and fixing of Bycuss Tree Plantincluding transport including all charge etc 38 supply and fixing of Royal Parms including transport including all charge etc 39 supply and fixing of Aricka Parms including transport including all charge etc 40 supply and fixing of Mosanda including transport including all charge etc 41 Planting of Asparagus myuri ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch includingloadingandunloadingcharges,transportation, stacking ofsaplings atsite, earthwork excavationof required size,planting of sapling, refilling of excavated earth etc as directed by the site in-charge. 42 supply and fixing of Adineeyam including transport charge etc complete 43 supply and fixing of Gulmahar Tree Plant including transport charge etc complete 44 PlantingofTecomacapensisfoliageshrubvarietyof height 30-45 cm in polythene bag of size 6x7 inch including loadingandunloadingcharges,transportation,stackingof saplingsatsite,earthworkexcavationofrequiredsize, plantingofsapling,refillingofexcavatedearthetcas directed by the site in-charge. 45 PlantingofCycusrevoluta21-30 Leavesornamental foliageSpecimenplantvarietyofheight105-120cmin polythenebagofsize16x16inchincludingloadingand unloadingcharges,transportation,stackingofsaplingsat site,earthworkexcavationofrequiredsize,plantingof sapling, refilling of excavated earth etcasdirectedby the site incharge. 46 supply and fixing of Neem Cake including transport charge etc complete 47 Supply of Vermicompost in powder form, devoid of impuritiesandothermaterials,nutrientdenseandwhich supports plant growth including cost of transportation 48 FOUNTAINSUPPLYANDFIXINGFOUNTAINBOTTOM WITH BASE AS PER DESIGN INCLUDING ALL LABOUR AND MATERIAL ETC. 49 SECTION : 5 IT COMPANANT 50 INDOOR & OUTDOOR SURVEILLANCE 51 Supplyandfixingof5.0MPIPOutdoorCamerawith necessary fitting including labour cost,etc complete 52 Supply and fixing of 4.0MP IP PTZ CAMERA with necessary fitting including labour cost,etc complete 53 Supply and fixing of ANPR CAMERA with necessary fitting including labour cost,etc complete.Similar to dahua technologyITC431- RWIF-IRLS 4 mp outdoor network link line plate bullet Camera. 54 Supply and fixing of NVR 32 CH with necessary fitting including labour cost,etc complete 55 Supply and fixing of NVR 8CHwith necessary fitting including labour cost,etc complete 56 Supply and fixing of 8TB HARD DISK complete 57 Supply and fixing 8 PORT POE SWITCH complete 58 Supply and fixing 24 PORT POE SWITCH complete 59 Supply and fixing CAT6 ARMOURD CABLE complete 60 Supply and fixing OFC CABLE 12CORE Armourd complete 61 Supply and fixing OFC CABLE 6 CORE Armourd complete 62 Supply and fixing Outdoor Rack complete 63 Supply and fixing of 3 Core 4 Sqmm Armourd Cable complete 64 Supply delivery and erection for following Networking Accessories, DB, Rack indoor , LIU, Media Converter, SFP, Pigtail, Cable Manager, Connectors etc , complete as direected by the departmental officer 65 Network Accessories 66 16 Port Gigabit Unmanaged Network Switch with 2 SFP (Including Module & Pigtail) 67 Fiber Patch Panel 12 Port 68 LC/LC Single Mode / Multi mode Patch Cord 2mtr 69 Pigtails Single Mode / multi mode Cord LC type for Fiber Patch Panel 70 CAT 6A UTP Armoured Cable 71 CAT 6A UTP 2 mtr Patch Cord 72 CAT 6A Modular 24 Port Patch Panel fully loaded 73 Fiber Single Mode Cables 12 Core Armoured 74 Supply delivery and erection for following NETWORK VIDEO RECORDER FOR CCTV HIGHER END etc , complete as direected by the departmental officer 75 4 Channel - 1 SATA 76 8 Channel - 1 SATA (1 No. Hard Disk) 77 16 Channel - 2 SATA (2 Nos. Hard Disk) 78 32 Channel - 2 SATA (2 Nos. Hard Disk) 79 Supply delivery and erection for following LAN NETWORK SWITCHES - HIGHER ENDFully Managed 10 / 100 / 1000 Layer-3 with 10G Uplink - Higher End 80 24 Port 81 24 Port with Fibre Port 82 48 Port 83 Supply delivery and erection for following MEDIA CONVERTER FOR OPTICAL FIBRE CABLE HIGHER END complete as direected by the departmental officer 84 Single Mode 85 Multi Mode 86 Supply delivery and erection for following I/O SOCKET - HIGHER END complete as direected by the departmental officer 87 RJ-45 88 RJ-11 89 CAT 6 PVC Module Box 90 Face Plate Single Socket RJ-45 91 Face Plate Dual Socket RJ-45 92 Face Plate Quad Socket RJ-45 93 Supply delivery and erection for following HARD DISK FOR NVR - HIGHER END complete as direected by the departmental officer 94 2 TB 95 4 TB 96 6 TB 97 8 TB 98 Supply delivery and erection for following RACK WITH ACCESSORIES - HIGHER END complete as direected by the departmental officer 99 2U Rack 100 4U Rack 101 6U Rack 102 9U Rack 103 12U Rack 104 36U Rack 105 42U Rack 106 Fan extra for the above rack 107 Supply delivery and erection for following Cable Management Box with Cover complete as direected by the departmental officer 108 CABLE MANAGEMENT SYSTEM 109 50mm x 80mm Cable box with cover 110 150mm x 105mm Cable box with cover 111 b. Divider 112 c. Cover Joint 113 d. End Cap 114 e. Joint for Top Part 115 f. Joint for Bottom Part 116 Supply and fixing of Pole 6 Mtrs with footing includng cost of excavation.Pcc,etc complete 117 Supply and fixing of Pole 8 Mtrs with footing includng cost of excavation.Pcc,etc complete 118 Supply and fixing of 15KVA Online UPSnecessary fitting including labour cost,etc complete 119 SupplyandFixingofIPSANwithHDDforSecodary Recording 1 day 120 SupplyandFixingofVMS-IncludingEnterance&Exit ANPR, Surveillance, Parking availability, Parking Mangement, Duration and Payment Calculation 121 Supply and Fixing of VMS Server including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 122 Supply and Fixing of VMS Workstation for Operation including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 123 INTERACTIVE TOUCH PROFESIONAL DISPLAY, ACTIVE LED VIDEO WALL AND VIDEO CONFERENCING SYSTEM 124 65”, 4K, Andriod-13, INTERACTIVE TOUCH Professional Display with USB-C, HDMI-In & Out. 125 Professional 4K, All-In-One VC Camera bar, extension TABLE MIC, AI face tracking and auto zooming 126 4K, 12x Optical,5x Digital, Total 60x Zoom, Professional PTZ VC Camera:-Built-In Microphone Array, Speaker Tracking. 127 Full HD, 20x Optical, Professional PTZ VC Camera. 128 Outdoor Active LED Video wall with Pixel Pitch of 4mm, MS Cabinets, Receiving Cards and Control Processor. 129 Supply and Fixing of following UHF WIRELESS CONFERENCE MIKE SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 130 UHF Wireless WAP access point ( Supports both Audio system and Camera system ) 131 Supply and Fixing of following OUTDOOR PA SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 132 Supply and fixing of IP Speaker Outdoor 133 Supply and fixing IP Server , Broad Cast 134 Supply and fixing IP Phone 135 Supply and Fixing of following OUTDOOR PARKING SOLUTION including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 136 Supply and fixing of AI Camera for Parking Availability 137 Supply and fixing of LED Display for Vehicle Availability 138 Supply and fixing of 55 4K UHD for Parking availability with connecting Cable 139 Supply and fixing of Work Station at Security Room 140 Supply and Fixing of following INDOOR SURVEILLANCE including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 141 Supply and fixing of CAT6 INDOOR CABLE including labour cost 142 Supply and fixing of 25.4mm pipe for cable laying including labour cost 143 Supplyandfixingof 3Core4SqmmArmourdCable includinglabour cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 144 Supply and Fixing of following IINDOOR PA SYSTEM including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 145 Supply and fixing of 15W Speaker Indoor 146 Supply and fixing of 120W Mixer Amplifier 147 Supply and fixing of240W Power Amplifier 148 Supply and fixing ofCordless Mic UHF 149 Supply and fixing of2 Core 1.5 Sqmm with neatly finishing 150 Supply and fixing of 25.4mm pipe for cable laying including labour cost 151 Supply and Fixing of followingAnalog to IP Module including cost of material and all other charges etc., Completed as Directed by the departmental Engineer. 152 Indoor system 153 Outdoor system 154 INDOOR CONTROL ROOM 155 Supplyandinstallationof2TonA/CwithSteblizer& Accessoriesincludingmaterialconveyance,labour complete as per engineer incharge 156 GST amount as applicable (18 %)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Tamil Nadu View Result →
2.
Environment and Forests #11328348 AOC
Bids Are invited for Facility Management Services - Lumpsum Based - Veerangana Durgavati Tiger Reserve; Long Range Camera With Power And Networking; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) - Ir Long Range Ptz Camera , Vandal-Proof Dome Camera , Solar Panel , Lithium Battery Bank , Solar Offgrid Inverter And Charger , Ptp Antenna 23Dbi , Ptmp 90 Degree Sector Antenna Long Range , Copper Lightning Arrester Assembly , Waterproof Outdoor Control Box , Industrial Grade Poe Switch , Industrial Grade Pdu 6A/16A , Electrical Components (Sensor, Fan Controller, Mcb Etc.) , 1.5 Sqmm 2 Core Outdoor Fr Cable , Services (Installation, Handling, Training) , Transportation Of Material To Work Site
Contract Date: Ref. Documents Contract Value : ₹ 18.62 Lakh
Government Departments No of Bidders 3
Madhya Pradesh View Result →
3.
Law and Justice #11253573 AOC
Bids Are Invited For Annual Maintenance Contract For Networking Devices (Version 2) - All Networking Devices; As Available In Office , Annual Maintenance Service - Desktops, Laptops And Peripherals - As Available In Office Computers Printers And Scanners; As Available In Office , Amc Of Integrated Security And Surveillance System - As Available In The Office; Comprehensive; All Components; Consumables To Be Provided By Service Provider (Included In The Contract Cost); Commercial Government Premises; Control Room; Depending Up.. , Customized Amc/Cmc For Pre-Owned Products - Biometric Attendance System; As Available; Comprehensive Maintenance Contract (Cmc); As Per Requirement; Yes
Contract Date: Ref. Documents Contract Value : ₹ 11.23 Lakh
Government Departments No of Bidders 9
Gujarat View Result →
4.
Housing Urban and Rular Development #11196824 Price Bid
Tender for Construction Of Government Degree College Haroli, District Una Hp (Sh- Providing Lan And Wi-Fi Infrastructure With Active & Passive Networking Components At Admin Block)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 5
Himachal Pradesh View Result →
5.
Educational and Research Institute #11169723 AOC
Purchase Of Three Seater Desk Cum Bench , Computer Lab Work Stations And Chairs For Class Rooms, Teaching Block-Ii At Chaudhary Ranbir Singh University, Jind , Student Desk Cum Bench Specifications: The Class Room Desk Consists Of Front Desk, Middle Row Comprising Of Seat For Front Desk, Back Supported & Jointed With It The Desk Behind For Another Seat, Back & Another Desk For The Person Sitting Behind And So On Till The Last Row Which Shall Consist Of Seat Only, Provided With Back Support. Thus The Desking System Shall Consist Of One Row Of Front Desk, Several Rows Of Middle Seat & Back Desk & Again One Last Row Of Back Seat. The Front Edges Of Mdf Board Shall Be Post Formed And All Other Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue.Mdf Board Shall Have .8 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Balancing Laminate Of White Colour. A. Front Desk: Top Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Top Of Front Desk Shall Be 25Mm Thick Mdf Laminated On Both Sides As Mentioned Above. The Storage Shelf And Front Cladding Will Consist Of 18 Mm Thick Mdf Board Laminated As Mentioned Above.The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. All The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. , B. Middle Seat & Desk: Shall Consist Of Seat, Back & Writing Shelf Behind And Storage Shelf Below It. The Detail Specifications Will Be As Under: Seat Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. Back Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Seat, Back & Writing Desk Shall Be 25Mm Thick Mdf Laminated On Both Sides, Top Laminate & Balancing Laminate On Back As Mentioned Above. The Storage Shelf Will Consist Of 18 Mm Thick Mdf Board Laminated As Mentioned Above. Theall The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Epoxy Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. Writing Shelf Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. , C. Last Row: (Back Row) The Last Row Consists Of Seat & Back Only Mounted On 50 X 25 X 1.6Mm Thick Crca Pipe Frame. Back Row Size: 1800Mm X 375Mm X 25Mm Thick For Three Seater Desk. The Back Row Shall Be 25Mm Thick Mdf Laminated As Mentioned Above. The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Mdf Board 18 Mm Thick. All The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere. Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Epoxy Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. Note: 1 Crca Steel Pipes Shall Be Of Tata/Jindal Or Equivalent. 2. All Pre-Laminated Mdf Boards Shall Be Of Action Tesa/Marino/Godrej Make. 3. The Front Edges Of Mdf Board Will Be Post Formed. 4. Pvc Lipping 2 Mm Thick Will Be Provided On Remaining Edges. , Supply And Installation Of Work Stations - 900W X 600D Providing And Placing Tile Based Modular Workstation, With Partitionthickness As 50-60 Mm And Ht -1200 Including Powder Coated Aluminium Trims.Tiles On Main Spine: Combination Of Top Tiles Are Plb/Fabric Tackable/Whiteboard Tile. Bottom Tiles - Plain Metal. Fin: 50-60 Mm Thick Panel Formed Out Of Blocks Which Are 2X9 Mm Thick Plb Boards Wrapped With Laminate At Intermediate Block And Top Block. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Decorative Laminate/White Board. System Shall Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finish. (Decorative Laminate) Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. The Partition Has Two Integrated Raceway Provided One At Skirting Level And Another At The Work Surface Level Thus Ensuring Separation Of Power And Networking Cables. Necessary Cut Outs For Switches And Switches As Per Site Requirement Will Be Provided. Cost Of Wires Not To Be Considered In Furniture. Work Surface - Made Of 25 Mm Thick Pre-Laminated Particle Board Confirming To Is:12823 Interior Grade With Post Forming On Front Only Of Size 900 Mm W X 600 Mm. Pvc Edge Binding Tape 2 Mm Thick Will Be Provided In Balance Sides. Note: All Partitions And Side Panels Have Leveling Screws For Adjustment In Case Of Uneven Floor To Take Care Of +/- 20 Mm Of Uneven Flooring.Raceway:-The Raceways Are Made Out Of 0.8 Mm Thick Crca & Powder Coated. The Electrical Raceway Can Be Provided Below Worktop Or Above Worktop, These Are Hook On Type Which Will Be Mounted On The Verticals. The Skirting/Data Raceway Is Hollow And Will Be Mounted On The Raceway Channels Cpu Trolley Fixed Type:Cpu Trolley: The Metal Tray Is Made Of 1.0 Mm Thick Crca Sheet And Side Support Is Made Of 0.8 Mm Thick Crca Sheet. On Wall Side (With Common Side Partition Sharing) , Back To Back (With Common Side Partition As Well As Common Central) , Chairs For Computer Lab Work Stations Without Arm: Specifications Upholstered With Fabric, High Resilience Polyurethane Foam, Fixed Type Mechanism, Tubular Frame. Back: (W) 39.0 Cm X (H) 38.0Cm, Seat: (W)45.0Cm X (D) 42.0Cm Overall Dimensions Of Chair Scat Height -45.0Cm. Height -81.5Cm. Width & Depth Of Chair As Measured From Pedestal - Width-56.0 Cm And Depth-54.0 Cm. The Seat Shall Be Made From 1.2 +/- 0.1Cm. Thk. Hot Pressed Plywood And Back Shall Be Injection Moulded From Black Co-Polymer Polypropylene Upholstered With Fabric And Moulded Polyurethane Foam Together With Seat And Back Covers. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Dimensions Of Seat Shall Be 45.0Cm (W) X 42.0Cm. (D) And Of Back Shall Be 39.0Cm(W) X 38.0Cm (H). The Seat And Back Covers Shall Be Injection Moulded In Black Co-Polymer Polypropylene. The Hr Polyurethane Foam Shall Be Moulded With Density 45 +/-2 Kg/M3 And Hardness Load 162 Kgf As Per Is:7888 For 25% Compression. The Fixed Type Mechanism Shall Be Without Back Tilt. The Tubular Frame Shall Be Made Up Of Dia 2.54 ±0.03Cm. X 0.2 +0.016Cm.Thk. M.Ser.W. Tube And Black Powder Coated (Dft 40-60 Microns). The Overall Dimensions Of Chair Shall Be Seat Height - 45.0Cm, Height -81.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-56.0 Cm And Depth-54.0 Cm.
Contract Date: May 26, 2026 Contract Value : ₹ 53.97 Lakh
Boards / Undertakings / PSU No of Bidders 7
Haryana View Result →
Tamil Nadu View Result →
7.
Communications and Information Technology  #11132471 AOC
Selection Of Agencies And Rate Contract For E waste Management And Handling Services Nit , Description , Category 1: Crt Monitors , Category 2: Flat Screen Monitors ( Lcd Monitor ) , Led Monitor , Category 3: A ) Fully Intact Complete Cpu ( With All Components ) , B ) Cpu ( With Missing Components ) , C ) Cpu Cabinet Without Any Components , Category 4:A ) Deskjet Printer , B ) Dot Matrix Printer , C ) Laserjet Printer - With Toner , D ) All In One ( Aoi ) , E ) Line Printer , Category 5: Scanner , Category 6: Networking Switch , Category 7: Keyboards , Category 8: Mouse , Category 9: A ) Ups With Battery , B ) Ups Without Battery , Category 10: Ups Battery , Category 11: Server , Category 12: Laptop , Category 13: Washing Machine , Category 14: Air Conditioners , Category 15: Refrigerator , Category 16: Mobile Phone ( With Battery ) , Tablet , Telephone , Projector , Category 17: ( Domestic Appliances ) Microwave Oven , Water Heater / Geyser , Crt Tv , Lcd / Plasma / Led Tv , Coffee Machine , Water Purifier / Dispenser , Exhaust Fan , Category 18: Office Equipment ( Xerox Machine )
Contract Date: May 21, 2026 Contract Value : ₹ 9,387
Government Departments No of Bidders 3
West Bengal View Result →
8.
Housing Urban and Rular Development #11105349 Technical Bid
Tender for Comprehensive Maintenance Opex Of Data Networking Ip Tel Vc System Inclusive Passive Components For Honble High Courtallahabad Lucknow Bench Lucknow
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
9.
Banking and Finance #11081699 AOC
Bids Are invited for Digital Queue Management And Customer Flow Control System Procurement Package Integrated Queue Management Terminal Unit - Digital Token Generation Unit With User Interface And Display Integration , System Installation And Commissioning Service - Complete Deployment, Configuration And Operational Commissioning , Display And Notification Interface System - Visual Display Interface For Queue Status And Customer Call Management , Connectivity And Network Integration Module - Data Connectivity Setup With Required Networking Components , Software Configuration And Control Interface - Queue Management Software With Control And Reporting Functionality Total Quantity : 25
Contract Date: Ref. Documents Contract Value : ₹ 24.15 Lakh
Government Departments No of Bidders 4
Rajasthan View Result →
Madhya Pradesh View Result →
11.
Educational and Research Institute #10910485 Technical Bid
Tender For Supply, Installation, Testing And Commissioning Of Public Address System At Kuttambalam, Kerala Kalamandalam , Supply, Installation, Testing And Commissioning Of Public Address System At Kuttambalam, Kerala Kalamandalam (Before Quoting The Rate, The Bidder Shall Carefully Read The Conditions In The Nit And The Accompanying Special Conditions.) The Rates Quoted Are All-Inclusive And Include A Comprehensive Annual Maintenance Contract For One Year After The Oem Warranty Period Of Two Years.) The Reference Make And Model Mentioned Are Provided Solely To Indicate The Required Technical Specifications And Performance Standards Of The Item To Be Supplied. Bidders May Offer Any Approved Make, Provided That Such Products Fully Comply With Or Exceed The Specified Technical Parameters And Quality Requirements. , Powered Line-Array Loudspeaker Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Two-Way Self-Powered Line-Array Loudspeaker Module Suitable For Live Sound Reinforcement, Auditorium, Touring, And Fixed Installation Applications, Incorporating Dual Low-Frequency Neodymium Transducers Of Approximately 6-7 Inches Each And A High-Frequency Compression Driver With Waveguide, Driven By Integrated Class-D Amplification With Built-In Dsp Processing For Crossover, Equalization, Delay, Limiting, And System Protection. The Loudspeaker Shall Deliver Continuous Power Handling In The Range Of Approximately 500-800 W Or Higher, Maximum Sound Pressure Level Of Not Less Than 130 Db Spl, Usable Frequency Response Extending Approximately From 60 Hz To 17 Khz Or Wider, And Horizontal Coverage Of About 100°-120°, Suitable For Scalable Vertical Array Deployment. The Enclosure Shall Be Of Rugged, Tour-Grade Construction With Integrated Rigging Hardware Enabling Safe Suspension Or Ground-Stacked Line-Array Configuration, And Shall Include Balanced Audio Input/Output Connectivity, Network Or Software-Based Control/Monitoring Capability Where Applicable, Power Cabling, Flying Accessories, And All Necessary Mounting Hardware Required For Complete System Deployment. The System Shall Be Fully Compatible With Professional Subwoofer Systems And Digital Audio Infrastructure, And Shall Be Supplied Complete With All Accessories, Interconnections, Documentation, Installation, Alignment, Testing, And Commissioning, Ensuring Uniform Coverage, Phase Coherence, Safe Rigging Compliance, And Noise-Free Operation In Accordance With Approved Technical Standards And Site Requirements. Reference Make & Model: Jbl Srx 906La Jbl Professional / Rcf / Db Technologies / Qsc / Wharfedale Pro , High-Power Powered Subwoofer Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Low-Frequency Subwoofer System Suitable For Live Sound Reinforcement, Auditorium, Touring And Fixed Installation Applications, Incorporating A Minimum Single 18-Inch High-Excursion Low-Frequency Transducer Housed In An Acoustically Optimized Enclosure And Driven By Integrated High-Efficiency Class-D Amplification With Built-In Dsp Processing For Crossover, Equalization, Delay, Polarity Control, Limiting, And Comprehensive System Protection. The Unit Shall Deliver Continuous Amplifier Power Of Not Less Than Approximately 1000 W Rms (Or Higher), Maximum Peak Sound Pressure Level Of Not Less Than About 130 Db Special And Usable Low-Frequency Response Extending To Approximately 35 Hz Or Lower, Suitable For Integration With Professional Full-Range And Line-Array Loudspeaker Systems. The Enclosure Shall Be Of Rugged Tour-Grade Construction With Durable Finish, Integrated Handles, Pole-Mount Provision For Satellite Loudspeakers, And Provision For Safe Ground-Stacking Or Transport, And Shall Include Balanced Audio Input And High-Pass Filtered Output Connectivity, Selectable Presets Or Network/Software-Based Control And Monitoring Where Applicable, Power Cabling, And All Necessary Mounting And Interconnection Accessories Required For Complete Deployment. The System Shall Be Supplied Complete With All Accessories, Interconnections, Documentation, Installation, Alignment, Testing, And Commissioning, Ensuring Proper Phase Integration, Uniform Low-Frequency Coverage, Safe Electrical And Mechanical Operation, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Fully Operational High-Power Subwoofer Solution. Reference Make & Model Jbl Srx 918S Approved Makes: Jbl Professional / Qsc / Rcf / Db Technologies / Wharfedale Pro , Compact Array Flying Frame For Powered Line-Array Loudspeaker Supply, Installation, Testing And Commissioning (Sitc) Of A Certified Compact Array Flying Frame Compatible With The Offered Professional Line-Array Loudspeaker System, Suitable For Suspension Or Ground-Stack Deployment In Live Sound, Auditorium, Touring, And Fixed Installations. The Frame Shall Feature A Two-Part Collapsible Or Modular Quick-Deployment Design, Constructed From High-Strength Corrosion-Resistant Metal, And Shall Be Rated To Safely Support The Complete Loudspeaker Array With Appropriate Safety Factor In Compliance With Relevant Rigging And Safety Standards. It Shall Include Secure Locking Mechanisms, Adjustable Tilt/Angle Provision, Certified Suspension Points, And Compatibility With Standard Lifting Hardware, And Be Supplied Complete With All Necessary Rigging Accessories, Fasteners, Safety Pins, Load-Rated Fittings, And Transport Provisions. Preferred Make & Model: Jbl Eon 710 Approved Makes: Jbl Professional / Yamaha / Qsc / Rcf / Db Technologies / Mackie / Ld Systems , Self-Powered Two-Way Floor Monitor Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Floor Monitor Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Sound Applications, Incorporating A Custom-Designed 10-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Waveguide, Driven By Integrated High-Efficiency Class-D Amplification Delivering Not Less Than 1300 W Peak And 650 W Continuous Power, With Maximum Sound Pressure Level Of Approximately 125 Db Or Higher And Usable Frequency Response Extending Approximately From 52 Hz To 20 Khz. The Unit Shall Include A Built-In Multi-Channel Digital Mixer, Advanced Digital Signal Processing Derived From Professional Audio Processing Platforms Providing Equalization, Delay, Crossover, Feedback Control, And Protection Functions, Along With Balanced Xlr/Trs Combo Inputs, Bluetooth Or Equivalent Wireless Audio/Control Capability, And Balanced Xlr Link/Thru Output. Input Impedance, Gain Range, And Crossover Characteristics Shall Be Suitable For Professional Microphone- And Line-Level Operation. The Enclosure Shall Be Of Rugged, Acoustically Optimized Construction Suitable For Wedge-Monitor Or Pole-Mounted Deployment, Incorporating Integral Handles, Stable Base Geometry, And Durable Finish For Continuous Professional Use. The System Shall Be Supplied Complete With All Required Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Safe Electrical Performance, And Full Functional Compliance In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Deployable Powered Floor-Monitor Solution. Reference Make & Model: Jbl Eon 710 Approved Makes: Jbl Professional / Yamaha / Qsc / Rcf / Db Technologies / Mackie / Ld Systems , Supply, Installation, Testing And Commissioning Of: A 24-Channel Analog Mixing Console. A Professional Multi-Channel Analog Mixing Console Suitable For Live Sound Reinforcement And Auditorium Applications, Comprising A Minimum Of 16 Mono Microphone Input Channels With High-Quality, Low-Noise Mic Preamplifiers And +48 V Phantom Power, Along With Additional Stereo Input Channels, Together Forming A 24-Channel Analog Mixing Console, Balanced Xlr/Trs Connectivity, 3-Band Equalization With Sweepable Mid-Frequency And High-Pass Filter On Mono Channels, Equalization On Stereo Channels, Multiple Auxiliary Sends For Monitor And Effects Operation, Built-In 24-Bit Digital Signal Processor Providing Selectable Reverberation, Delay, And Modulation Effects, Subgroup And Main Stereo Bus Routing, Stereo Usb Or Equivalent Interface For Playback And Recording, Led Level Metering, Headphone And Control-Room Monitoring Outputs, Graphic Equalization On Main Outputs, Rugged Metal Chassis Suitable For Continuous Professional Use, And Complete With All Required Accessories, Interconnections, Power Supply, Documentation, Installation, Testing, And Commissioning In Accordance With Approved Technical Standards And Site Requirements. 24-Channel Analog Mixing Console Reference Make & Model: Soundcraft Nano M24 Approved Makes: Sound Craft / Yamaha / Allen & Heath / Mackie / Behringer. , Dynamic Vocal Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wired Dynamic Vocal Microphone Suitable For Live Sound Reinforcement, Stage Performance, Public Address, And Studio Applications, Featuring A Moving-Coil Dynamic Transducer, Cardioid Polar Pickup Pattern For Effective Rear-Noise Rejection And Feedback Control, And Frequency Response Approximately 50 Hz To 15 Khz Optimized For Vocal Clarity. The Microphone Shall Incorporate A Durable All-Metal Body Construction, Integral Pneumatic Or Equivalent Shock-Mount System To Minimize Handling Noise, And Balanced Low-Impedance Xlr Output Compatible With Standard Professional Audio Mixing Consoles And Pa Systems. The Unit Shall Be Supplied Complete With Microphone Clip/Holder, Thread Adapter, Protective Storage Pouch Or Case, And Necessary Interconnection Accessories, And Shall Be Installed, Tested, And Commissioned To Ensure Noise-Free Performance, Proper Signal Integrity, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Vocal-Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 58 Approved Makes: Shure / Sennheiser / Akg / Audix , Dynamic Instrument Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wired Dynamic Instrument Microphone Suitable For Live Sound Reinforcement, Studio Recording, Public Address And Installed Audio Applications, Incorporating A Moving-Coil Dynamic Transducer, Cardioid Polar Pickup Pattern For Effective Off-Axis Noise Rejection And Feedback Control, And Frequency Response Approximately 40 Hz To 15 Khz Optimized For Close-Miking Of Musical Instruments, Percussion, And Amplified Sound Sources. The Microphone Shall Feature A Rugged All-Metal Body Construction, Integral Pneumatic Or Equivalent Internal Shock-Mount System To Minimize Handling Noise And Vibration, And Balanced Low-Impedance Xlr Output Compatible With Standard Professional Mixing Consoles And Pa Systems Without The Need For External Power. The Unit Shall Be Supplied Protective Storage Pouch Or Case And Necessary Interconnection Accessories, And Shall Be Installed, Tested, And Commissioned To Ensure Noise-Free Performance, Proper Signal Integrity, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Instrument-Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 57 Approved Makes: Shure / Sennheiser / Akg / Audix , Professional Drum Microphone Package Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Complete Drum Microphone Package Suitable For Live Sound Reinforcement, Studio Recording, And Installed Performance Applications, Comprising Not Less Than Seven Wired Microphones Including One Dedicated Low-Frequency Kick-Drum Dynamic Microphone, Multiple Dynamic Microphones For Snare And Tom Applications, And A Pair Of Condenser Overhead Microphones Of Identical Make And Model Requiring Standard 48 V Phantom Power, All Featuring Cardioid Pickup Pattern, High Sound-Pressure-Level Handling Capability, Balanced Xlr Output Connectivity, And Frequency Response Optimized For Percussion Instruments. The System Shall Be Supplied Complete With Drum-Rim Mounting Hardware, Microphone Clips, Appropriate Interconnection Cables Where Applicable, And A Durable Protective Carrying Case, Forming A Fully Deployable Drum-Miking Solution Compatible With Standard Professional Audio Mixing Consoles And Pa Systems. The Equipment Shall Be Of Robust Construction Suitable For Continuous Professional Use And Shall Include All Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning In Accordance With Approved Technical Standards And Site Requirements. Reference Make & Model: Shure Pga Drumkit 7 Shure / Sennheiser / Akg / Audix , Compact Overhead Condenser Microphone Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Overhead Condenser Microphone System Suitable For Speech Reinforcement, Choir Capture, Conferencing, And Installed Sound Applications, Comprising A Miniature Condenser Microphone Capsule With Flexible Gooseneck Or Suspension Provision And Interchangeable Polar Pattern Cartridges (Minimum Omnidirectional And Cardioid) To Enable Adaptable Coverage. The Microphone Shall Provide Wide And Natural Frequency Response Approximately 50 Hz To 17 Khz, High Dynamic Range (˜ 95 Db Or Greater), Minimum Common-Mode Rejection Of About 45 Db, And Balanced Low-Impedance Output With Defined Polarity, Ensuring Clear And Accurate Sound Reproduction With Low Noise And Distortion. The Unit Shall Operate On Standard Phantom Power In The Range Of Approximately 11 V To 52 V Dc With Low Current Consumption, And Shall Include An In-Line Or Integrated Preamplifier With Controlled Clipping Characteristics Suitable For Professional Audio Systems. The System Shall Be Supplied Complete With Suspension Accessories, Interchangeable Cartridges, Necessary Interconnection Components, Documentation, Installation, Testing And Commissioning, Ensuring Stable Overhead Deployment, Noise-Free Performance, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Fully Deployable Overhead Condenser Microphone Solution Suitable For Continuous Installed Use. Reference Make & Model : Shure Mx202 Shure / Audio-Technica / Akg / Electro-Voice / Earthworks / Samson / Peavey , 12-Inch Powered Two-Way Loudspeaker With Tripod Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Full-Range Loudspeaker Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Sound Applications, Incorporating A Custom-Designed 12-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Waveguide, Driven By Integrated High-Efficiency Class-D Bi-Amplification Delivering Not Less Than 1300 W Peak And 650 W Continuous Power, With Maximum Peak Sound Pressure Level Of Approximately 127 Db Or Higher And Usable Frequency Response Extending Approximately From 50 Hz To 20 Khz. The Loudspeaker Shall Provide Nominal Dispersion Coverage Of About 100° (H) × 60° (V), Balanced Xlr/Trs Combo Audio Inputs With Xlr Link/Thru Output, And Integrated Advanced Digital Signal Processing Including Equalization, Delay, Feedback Suppression, Ducking, And Protection Functions, Together With A Built-In Multi-Channel Digital Mixer, Bluetooth Or Equivalent Wireless Audio/Control Capability, And User-Interface Display For System Configuration. The Enclosure Shall Be Of Rugged, Acoustically Optimized Portable Construction With Integral Handles, Pole-Mount Provision, And Durable Finish Suitable For Continuous Professional Deployment. The System Shall Be Supplied Complete With A Heavy-Duty Adjustable Tripod Speaker Stand Compatible With The Loudspeaker Pole Socket, Incorporating Stable Base Design, Height-Locking Mechanism, And Adequate Load-Bearing Capacity For Safe Operation, Along With All Necessary Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Safe Mechanical And Electrical Performance, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Powered Loudspeaker Solution. Reference Make & Model Jbl Eon 712 Jbl Professional / Qsc / Rcf / Yamaha , Compact 12-Channel Analog Audio Mixing Console Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Compact Multi-Channel Analog Audio Mixing Console Suitable For Live Sound Reinforcement, Studio Recording, Public Address, And Installed Sound Applications, Comprising Not Less Than 12 Input Channels Including A Minimum Of 8 Mono Microphone/Line Input Channels With High-Quality Low-Noise Mic Preamplifiers And +48 V Phantom Power, Together With Additional Stereo Input Channels, Balanced Xlr/Trs Connectivity And Channel Equalization Suitable For Professional Audio Mixing. The Mixer Shall Incorporate Built-In Digital Signal Processing And/Or Effects Processing, Integrated Stereo Usb Audio Interface For Recording And Playback With Computer Connectivity, Usb Media Playback/Recording Capability, And Bluetooth Or Equivalent Wireless Audio Input, Along With Auxiliary Send(S), Main Stereo Outputs With Level Metering, And Headphone/Control-Room Monitoring Facilities. The Unit Shall Feature A Rugged Compact Chassis Suitable For Continuous Professional Use, And Shall Be Supplied Complete With All Required Accessories, Interconnections, Power Supply, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Performance, Reliable Operation, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Compact Mixing Solution Suitable For Stage, Studio, And Installed Environments. Reference Make & Model: Soundcraft Nano M12bt Soundcraft / Yamaha / Behringer / Mackie / Allen & Heath , 24-Channel Rack-Mountable Remote-Controlled Digital Mixer With Usb Multitrack Recording Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Rack-Mountable Digital Audio Mixing Console With Integrated Usb Multitrack Recording Capability, Suitable For Live Sound Reinforcement, Studio Production, Broadcast, And Installed Sound Applications, Comprising Not Less Than 24 Input Channels With High-Quality Microphone Preamplifiers, Balanced Analog And Digital Input Connectivity, And Fully Recallable Digital Signal Processing On All Channels. The System Shall Provide Remote-Control Capability Via Built-In Dual-Band Wi-Fi And/Or Ethernet, Enabling Operation From Multiple Standard Web-Browser-Enabled Devices Across Major Operating Systems Without Dedicated Software, And Shall Support Simultaneous Control From Multiple Devices For Flexible Mixing And Monitoring. The Mixer Shall Incorporate Integrated Professional Signal Processing Including Equalization, Dynamics Control, Feedback Suppression, Delay, And Effects Derived From Established Audio-Processing Platforms, Along With Multitrack Recording Of Input Channels And Stereo Mix Directly To Usb Storage And/Or A Connected Computer, Forming A Complete Recording And Mixing Solution. The Unit Shall Be Housed In A Road-Rugged Rack-Mountable Enclosure Suitable For Stagebox Or Fixed-Installation Deployment, And Shall Provide Multiple Auxiliary Outputs, Main Outputs, Headphone Monitoring, And Computer Audio-Interface Functionality. The Scope Shall Include The Supply Of The Latest Compatible Software/Firmware Version And An Appropriate Control Interface Device (Tablet) Required For Proper Configuration, Remote Operation, And Monitoring Of The System. The Supply Shall Further Include All Necessary Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Reliable Operation, Noise-Free Performance, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Digital Mixing And Recording System. Reference Make & Model: Soundcraft Ui24r Soundcraft / Allen & Heath / Behringer / Yamaha Tablet: Fully Compatible With The Supplied Mixer For Seamless Operation And Control. , Supply, Installation, Testing And Commissioning Of Signal Cable & Interconnectors As Per Requirements. Approved Make Cable: Belden / Canare / Mogami / Amphenol Approved Interconnectors Neutrik,Canare, Belden, Switchcraft, Amphenol, Seetronic, Rean, Hicon, Deltron , 8-Channel Stage Snake Cable With Stage Box Supply, Installation, Testing And Commissioning (Sitc) Of A Professional 8-Channel Audio Multicore (Snake) Cable Assembly With Stage Box, Suitable For Live Sound Reinforcement, Auditorium, Studio, And Installed Pa System Applications. The System Shall Comprise Not Less Than Eight Balanced Low-Noise Microphone/Line Channels Constructed Using High-Purity Copper Conductors With Individually Shielded Twisted Pairs And Overall Protective Shielding, Enclosed In A Flexible, Abrasion-Resistant Outer Jacket Designed For Stage And Fixed-Installation Environments To Ensure Minimal Signal Loss, Low Electromagnetic Interference, And Reliable Long-Term Performance. The Stage End Shall Terminate In A Rugged Metal Stage Box Fitted With Clearly Numbered Professional Xlr Female Input Connectors (Minimum 8 Channels) And Appropriate Strain Relief, While The Console End Shall Provide Matching Xlr Male Fan-Out Connectors Or Multipin Termination Of Suitable Length For Mixer Connectivity. All Connectors Shall Be Professional-Grade With Secure Contact, Proper Grounding, And Mechanical Protection To Maintain Consistent Signal Integrity. The Multicore Assembly Shall Be Of Suitable Length As Required At Site, Properly Laid, Dressed, Labeled, And Tested For Continuity, Insulation Resistance, Shielding Effectiveness, And Noise-Free Operation. The Supply, Installation, Testing And Commissioning Scope Shall Include All Terminations, Routing Accessories, Identification Ferrules, Documentation, Testing, And Commissioning, Forming A Complete And Fully Operational Stage-To-Mixer Signal Interconnection System In Accordance With Approved Technical Specifications And Site Requirements. Approved Make: Belden / Neutrik / Canare / Mogami / Amphenol , 27U Equipment Rack With Power Distribution Unit Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Standard 27U Equipment Rack Enclosure Suitable For Housing Audio, Networking And Control Equipment Associated With The Pa And Av System. The Rack Shall Be Of Robust Steel Construction With Corrosion-Resistant Powder-Coated Finish, Providing Adequate Load-Bearing Capacity, Ventilation Provisions, Cable-Management Access, And Secure Front Door With Locking Arrangement, Along With Removable Side Panels And Appropriate Mounting Rails Conforming To International Rack Standards. The Rack Shall Be Supplied Complete With A Rack-Mountable Power Distribution Unit Providing Multiple Switched And Fused Ac Output Sockets, Proper Earthing/Grounding Arrangement, Overload Protection, And Suitable Input Power Cord, Ensuring Safe And Reliable Power Distribution To All Installed Equipment. The Installation Shall Include All Necessary Mounting Hardware, Blanking Panels, Cable Organizers, Labeling, Earthing Connections, And Internal Power Wiring, And The System Shall Be Properly Assembled, Installed, Tested, And Commissioned To Ensure Mechanical Stability, Electrical Safety, Effective Heat Dissipation, And Reliable Operation In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete And Ready-To-Use Equipment Rack Solution. Approved Makes: Valrack / Netrack / Rittal / Or Equivalent Professional-Grade Manufacturers Meeting Or Exceeding The Specified Technical Parameters. , Microphone Mini Boom Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Microphone Mini Boom Stand Suitable For Stage Performance, Studio Recording, Auditorium, And Installed Sound Applications. The Stand Shall Be Of Robust Metal Construction With Corrosion-Resistant Finish, Incorporating A Stable Weighted Base Or Tripod Base, Height-Adjustable Vertical Shaft, And A Compact Adjustable Boom Arm With Secure Locking Mechanism For Precise Microphone Positioning. The Stand Shall Provide Standard Microphone Mounting Thread Compatibility (3/8? And 5/8? With Suitable Adapter) And Shall Be Capable Of Supporting Typical Dynamic Or Condenser Microphones Without Vibration Or Drift, Ensuring Stable And Noise-Free Operation During Use. The Unit Shall Be Supplied Complete With All Necessary Mounting Accessories, Thread Adapters, Tightening Knobs, And Protective Fittings, And Shall Be Installed, Tested, And Commissioned To Ensure Mechanical Stability, Smooth Adjustment, And Reliable Performance In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Deployable Microphone Stand Solution Suitable For Continuous Professional Use. Approved Makes : Hercules / K&M / On-Stage / Gator / Samson / Ultimate , Supply, Installation, Testing And Commissioning Of Microphone Boom Stand Having Technical Specifation As Item No: 1.16 Approved Makes : Hercules / K&M / On-Stage / Gator / Samson / Ultimate , 16A + 6A Combo Power Distribution Unit (8-Socket) Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Rack-Mountable Or Portable Power Distribution Unit (Pdu) Suitable For Audio-Visual, Pa, And Equipment Rack Applications, Providing A Minimum Of Eight Ac Output Sockets In A 16A + 6A Combination Configuration Compatible With Standard Indian Electrical Systems. The Unit Shall Be Of Robust Metal Construction With Fire-Retardant Insulated Components, Incorporating Individual Or Grouped Switched Outputs, Suitable Internal Wiring, Proper Earthing/Grounding Provision, And Protection Features Such As Overload Protection, Fuse Or Mcb Safeguarding, And Surge Suppression Where Applicable, Ensuring Safe And Reliable Power Delivery To Connected Equipment. The Pdu Shall Be Designed For Continuous Professional Use, With Clearly Labeled Sockets, Secure Input Power Connection Of Appropriate Current Rating, And Compatibility With Standard Rack Or Equipment Mounting Arrangements. Approved Makes : Valrack / Netrack / Rittal / Hager / Legrand / Or Equivalent Professional-Grade Manufacturers Meeting Or Exceeding The Specified Technical Parameters. , Wireless Handheld Vocal Microphone System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Wireless Handheld Vocal Microphone System Suitable For Live Sound Reinforcement, Stage Performance, Auditorium And Installed Pa Applications, Comprising A Dynamic Handheld Microphone Capsule With Cardioid Polar Pickup Pattern And Frequency Response Approximately 50 Hz To 15 Khz Optimized For Clear Vocal Reproduction And Effective Feedback Rejection. The System Shall Include A Uhf Or Equivalent Professional Wireless Transmission System With Rack-Mountable Or Desktop Receiver, Stable Rf Performance With Selectable Channels/Frequencies As Permitted By National Regulations, Balanced Audio Output Connectivity, And Provisions For Antenna Diversity Or Equivalent Signal-Stability Technology To Ensure Reliable, Noise-Free Operation. The Handheld Transmitter Shall Feature Rugged Metal Construction, Secure Battery Compartment, Suitable Operating Range For Stage Use, And Compatibility With Standard Rechargeable Or Replaceable Batteries. The Receiver Shall Provide Audio Level Control, Rf/Af Indication, And Necessary Output Interfaces For Connection To Professional Mixing Consoles And Pa Systems. The Unit Shall Be Supplied Complete With Microphone Transmitter, Receiver, Antenna System, Power Supply, Mounting Accessories, Interconnection Cables, Documentation, Installation, Testing, And Commissioning, Ensuring Stable Rf Transmission, Clear Audio Performance, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Wireless Vocal Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Shure Sm 58 Approved Makes Sennheiser / Shure / Sennheiser / Audio-Technica / Akg , Digital Speaker Management System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Digital Loudspeaker Management And System-Processing Unit Suitable For Pa, Auditorium, And Installed Sound Reinforcement Systems, Incorporating Multi-Input And Multi-Output Balanced Analog Audio Channels (Minimum 2 Inputs And 6 Outputs Or Higher) With High-Resolution Digital Signal Processing For Complete System Optimization And Protection. The Processor Shall Provide Configurable Crossover Filtering, Parametric And Graphic Equalization, Delay Alignment, Polarity Control, Dynamic Limiting, And System Protection, Along With Automatic Feedback Suppression, Room Equalization, And Loudspeaker Tuning Functions Derived From Established Professional Audio-Processing Technologies. The Unit Shall Support Front-Panel Control With Display Interface And Remote Configuration Via Computer Or Network Connection, And Shall Include Non-Volatile Memory For Storing Multiple User Presets Suitable For Different System Configurations. Audio Performance Shall Ensure Low Noise, Wide Dynamic Range, And Minimal Distortion, Appropriate For Professional Live And Installed Sound Applications. The Equipment Shall Be Housed In A Standard Rack-Mountable Enclosure Suitable For Continuous Operation, And Shall Be Supplied Complete With Power Supply, Interconnection Accessories, Mounting Hardware, Documentation, Installation, Testing, And Commissioning, Ensuring Reliable Signal Processing, Safe Operation, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Speaker-Management Solution. Reference Make & Model Dbx Drive Rack Venue 360 Approved Makes : Dbx / Xilica / Behringer / Bss Audio , Condenser Pickup Microphone System Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Miniature Condenser Pickup Microphone System Suitable For Acoustic Musical Instruments, Stage Performance, Studio Recording, And Installed Sound Applications, Incorporating A Contact-Type Or Surface-Mount Condenser Transducer With Figure-8 (Bi-Directional) Polar Pickup Pattern And Wide Frequency Response Approximately 10 Hz To 18 Khz For Accurate Vibration And Tonal Reproduction. The Microphone Shall Provide High Sensitivity, Low Self-Noise, And Wide Dynamic Range, And Shall Operate On Standard Phantom Power (Approximately 9 V To 52 V Dc) Through An In-Line Or Integrated Preamplifier Module With Balanced Low-Impedance Xlr Output Suitable For Connection To Professional Mixing Consoles And Pa Systems. The System Shall Include Non-Permanent Mounting Provision Such As Adhesive Pad Or Equivalent Detachable Fixing Method To Enable Secure Attachment To Musical Instruments Without Damage, Along With Shielded Connecting Cable, Preamplifier Interface, And Strain-Relief Protection To Ensure Reliable Stage Use. The Unit Shall Be Supplied Complete With Mounting Accessories, Interconnection Components, Protective Storage Provision, Documentation, Installation, Testing, And Commissioning, Ensuring Stable Pickup Performance, Noise-Free Signal Transmission, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Condenser Pickup Microphone Solution Suitable For Continuous Professional Use. Reference Make & Model Akg C411pp Approved Make : Akg / Audio-Technica / Shure / Dpa , Direct Injection (Di) Box Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Direct Injection (Di) Box Suitable For Stage, Studio, Auditorium, And Installed Pa Applications, Designed To Convert High-Impedance Unbalanced Instrument Or Line-Level Signals To Balanced Low-Impedance Microphone-Level Output For Direct Connection To Mixing Consoles And Audio Systems. The Unit Shall Provide High-Quality Signal Isolation And Impedance Matching Using Transformer-Based Or Active Electronic Circuitry, Incorporating Balanced Xlr Output, Parallel/Thru Output For Amplifier Feed, Ground-Lift Switch To Eliminate Hum And Noise, And Attenuation Pad Or Level-Control Facility Where Applicable. The Di Box Shall Support Passive Operation Or Active Powering Via Internal Battery And/Or Phantom Power, Ensuring Compatibility With A Wide Range Of Musical Instruments And Audio Sources. Audio Performance Shall Ensure Wide Frequency Response, Low Distortion, High Headroom, And Minimal Noise, Suitable For Professional Live And Recording Environments. The Enclosure Shall Be Of Rugged Metal Construction With Protective Finish, Suitable For Continuous Stage Use, And Shall Be Supplied Complete With Necessary Connectors, Accessories, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Signal Transmission, Electrical Safety, And Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Di Interface Solution. Reference Make & Model Akg C411pp Approved Make : Radial / Dbx / Klark Technik / K & M / , Additional Xlr-To-Xlr Microphone Cable (10 M Length) Supply, Installation, Testing And Commissioning (Sitc) Of Professional Balanced Xlr-To-Xlr Microphone Interconnection Cables Of Minimum 10 Metres Length, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cables Shall Be Constructed Using High-Purity Copper Conductors With Twisted-Pair Configuration, Effective Overall Shielding, And Low-Capacitance Insulation To Ensure Minimal Signal Loss, Low Electromagnetic Interference, And Noise-Free Audio Transmission Over The Specified Distance. Each Cable Shall Be Terminated With Professional-Grade 3-Pin Xlr Male And Female Connectors Featuring Secure Locking Mechanism, Proper Grounding, Strain-Relief Protection, And Durable Metal Housing, Ensuring Reliable Connectivity And Long-Term Mechanical Integrity Under Continuous Professional Use. The Outer Jacket Shall Be Flexible, Abrasion-Resistant, And Suitable For Stage Handling And Fixed Installation Environments. The Supply, Installation, Testing And Commissioning Scope Shall Include Supply Of Complete Ready-To-Use Cables, Identification/Labeling, Testing For Continuity, Insulation, Shielding Effectiveness, And Signal Integrity, And Commissioning To Achieve Stable, Hum-Free Operation In Accordance With Approved Technical Standards And Site Requirements, Forming A Complete Professional Microphone Interconnection Solution. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Trs To Trs Audio Interconnection Cables Supply, Installation, Testing And Commissioning (Sitc) Of Professional Balanced Trs-To-Trs Audio Interconnection Cables Of Minimum 10 Metres Length Each, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cables Shall Utilize High-Purity Copper Twisted Conductors With Effective Shielding And Low Capacitance, Ensuring Low Noise, Minimal Signal Loss, And Reliable Balanced Audio Transmission Over The Specified Distance. Each Cable Shall Be Terminated With Professional 6.35 Mm Trs (Stereo) Male Connectors Having Durable Metal Housing, Proper Strain Relief, And Secure Electrical Contact, And Provided With A Flexible, Abrasion-Resistant Outer Jacket Suitable For Continuous Professional Use. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Ts To Ts Audio Instrument Cable Supply, Installation, Testing And Commissioning (Sitc) Of Professional Unbalanced Ts-To-Ts Audio/Instrument Interconnection Cable Of Minimum 10 Metres Length, Suitable For Stage, Studio, Auditorium, And Installed Pa System Applications. The Cable Shall Be Constructed Using High-Purity Copper Conductor With Effective Shielding And Low Capacitance, Ensuring Low Noise Pickup, Minimal Signal Loss, And Reliable Signal Transmission For Instrument Or Line-Level Audio Connections. Each Cable Shall Be Terminated With Professional 6.35 Mm Ts (Mono) Male Connectors Featuring Durable Metal Housing, Secure Electrical Contact, And Proper Strain-Relief Protection, And Provided With A Flexible, Abrasion-Resistant Outer Jacket Suitable For Continuous Professional Use. Approved Makes: Belden / Canare / Mogami / Klotz / Nuetrik , Two-Way Loudspeaker With Speaker Stand Supply, Installation, Testing And Commissioning (Sitc) Of A Professional Self-Powered Two-Way Full-Range Loudspeaker Suitable For Live Sound Reinforcement, Stage Monitoring, Auditorium, And Installed Pa System Applications, Incorporating A High-Efficiency 12-Inch Low-Frequency Transducer And A High-Frequency Compression Driver With Constant-Directivity Waveguide, Driven By Integrated Class-D Amplification Delivering Not Less Than Approximately 1000 W Peak Power (Or Equivalent Continuous Rating). The Loudspeaker Shall Provide Maximum Sound Pressure Level Of About 130 Db Special Or Higher And Usable Frequency Response Extending Approximately From 50 Hz To 20 Khz, Ensuring Clear, High-Output Full-Range Audio Performance. The Unit Shall Include Balanced Xlr/Trs Combo Input(S), Additional Line/Microphone Input Capability, And Xlr Link/Thru Output, Along With Built-In Digital Signal Processing Providing Equalization, Crossover Management, Dynamic Protection, And Selectable Operating Modes Suitable For Front-Of-House Or Monitor Use. The Enclosure Shall Be Of Rugged, Acoustically Optimized Moulded Or Composite Construction With Integral Handles, Pole-Mount Socket, Monitor-Wedge Angle Provision, And Durable Protective Finish Suitable For Continuous Professional Deployment. The System Shall Be Supplied Complete With A Heavy-Duty Adjustable Tripod Speaker Stand, All Required Accessories, Interconnections, Documentation, Installation, Testing, And Commissioning, Ensuring Noise-Free Operation, Electrical Safety, Mechanical Stability, And Full Compliance With Approved Professional Audio And Site Technical Standards, Forming A Complete Deployable Powered Loudspeaker Solution. Reference Make : Yamaha Dbr Approved Make : Yamaha / Jbl Professional / Rcf Art, Qsc , Stage-Monitor Loudspeaker Supply, Installation, Testing And Commissioning Of A Self-Powered (Active) Two-Way Bi-Amped Bass-Reflex Professional Stage-Monitor Loudspeaker Comprising A 12-Inch Low-Frequency Woofer With Minimum 2.5-Inch Voice Coil And Ferrite Magnet And A 1.75-Inch High-Frequency Compression Driver In Coaxial Configuration, Providing Nominal Coverage Of Approximately 90° Horizontal × 60° Vertical With Fir-X Dsp-Controlled Crossover Around 1.8 Khz. High-Efficiency Class-D Bi-Amplification Delivering Not Less Than 1000 W Dynamic Power (Lf About 800 W And Hf About 200 W) And Approximately 465 W Continuous Output, Capable Of Producing A Maximum Sound Pressure Level Of At Least 129 Db Peak With A Frequency Response Of Approximately 55 Hz To 20 Khz (-10 Db) Or Wider. A Minimum Of Two Balanced Xlr/Trs Combo Mic/Line Inputs, Stereo Rca Input Provision, Balanced Xlr Link/Output, Integrated Dsp Processing And Protection Circuits, Housed In A Rugged Plywood Bass-Reflex Enclosure With Protective Grille, Monitor-Tilt Provision And Pole-Mount Socket, Suitable For Operation On 220-240 V Ac, 50 Hz Supply, Complete With All Necessary Accessories, Cabling, Installation Hardware. Reference Make & Model : Yamaha Dhr Approved Makes Yamaha / Jbl Professional / Rcf Art, Qsc , Analogue Audio Mixing Console Supply, Installation, Testing And Commissioning Of A Professional Analogue Audio Mixing Console With Minimum 16 Input Channels, Comprising At Least 8 Mono Microphone/Line Input Channels With High-Quality Microphone Preamplifiers, Switchable 48 V Phantom Power, Insert Points, High-Pass Filters, And Single-Knob Compressors On Selected Mono Channels, Together With Additional Stereo Line Input Channels To Realize Not Less Than 16 Simultaneous Inputs. The Mixer Shall Provide Balanced Xlr/Trs Connectivity, Multi-Band Channel Equalization With Sweepable Mid-Frequency On Mono Channels, Minimum Four Auxiliary Sends Including Effects Send, Group And Stereo Bus Routing, Peak Indication, And Comprehensive Master Level Metering. The Unit Shall Incorporate A Built-In Digital Multi-Effects Processor With Multiple Preset Programs And An Integrated Usb Audio Interface Supporting At Least 2-In/2-Out Operation With 24-Bit/192 Khz Resolution For Computer Recording And Playback. The Console Shall Be Housed In A Robust Metal Chassis Suitable For Portable Or Fixed Installation, Operate On 220-240 V Ac, 50 Hz Supply, Complete With All Necessary Accessories, Cabling, Installation Hardware. Reference Make: Yamaha Mg16xu Approved Makes : Yamaha, Allen & Heath, Soundcraft, Mackie, Behringer, Presonus, Midas, Studiomaster. , Supply, Installation, And Execution Of All Electrical Wiring Works Required For The Public Address System, Including Equipment Fixing, Speaker Cabling, Projector Cabling, Scaffolding, Carpentry, Fabrication, Conduit Laying, And Associated Civil Works, Complete In All Respects As Per Site Requirements And Directions Of The Universitys Engineer-In-Charge And Calibration, Testing, And Fine-Tuning Of The Installed Public Address System To Ensure Optimal Performance And Sound Quality, Complete In All Respects As Directed By The Universitys Engineer-In-Charge.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Kerala View Result →
12.
Petroleum and Natural Gas #10899401 AOC
Bids Are invited for Supply Price For Mr Item_Sl_No 01.0001.01 - Console Desk For Rws At Vijaipur , Supply Price For Mr Item_Sl_No 01.0001.02 - Console Desk For Rws At Auriya Location , Supply Price For Mr Item_Sl_No 01.0001.03 - Console Desk For Rws At Pata Location , Supply Price For Mr Item_Sl_No 01.0001.04 - Scada Fep Server With Kvm Console At Vijaipur Along With Accessories As Per Mr , Supply Price For Mr Item_Sl_No 01.0001.05 - Scada Fep Server With Kvm Console At Auriya Along With Accessories As Per Mr , Supply Price For Mr Item_Sl_No 01.0001.06 , Supply Price For Mr Item_Sl_No 01.0001.07 - Router And Networking Components At Vijaipur Along With All Accessories Complete , Supply Price For Mr Item_Sl_No 01.0001.08 - Router And Networking Components At Auriya Along With All Accessories Complete , Supply Price For Mr Item_Sl_No 01.0001.09 - Router And Networking Components At Pata Along With All Accessories Complete , Supply Price For Mr Item_Sl_No 01.0001.10 , Supply Price For Mr Item_Sl_No 01.0001.11 , Supply Price For Mr Item_Sl_No 01.0001.12 , Supply Price For Mr Item_Sl_No 01.0001.13 , Supply Price For Mr Item_Sl_No 01.0001.14 , Supply Price For Mr Item_Sl_No 01.0001.15 , Supply Price For Mr Item_Sl_No 01.0001.16 , Supply Price For Mr Item_Sl_No 01.0001.17 , Supply Price For Mr Item_Sl_No 01.0001.18 , Supply Price For Mr Item_Sl_No 01.0001.19 , Site Work Charges For Mr Item_Sl_No 1.0001 , Transportation Charges For Mr Item_Sl_No 1.0001 , Training Charges At Vendor Works For Mr Item_Sl_No. 1.0001 , Training Charges At Site For Mr Item_Sl_No. 1.0001 , Cpwmc Charges For Mr Item_Sl_No. 1.0001 , Charges For Extended Warranty For Mr Item_Sl_No. 1.0001 , Charges For Extended Storage For Mr Item_Sl_No. 1.0001 Total Quantity : 120
Contract Date: Ref. Documents Contract Value : ₹ 7.11 Crore
Boards / Undertakings / PSU No of Bidders 1
Uttar Pradesh View Result →
Madhya Pradesh View Result →
14.
Power #10885242 Technical Bid
Tender for Rate Contract For Supply & Installation Of Peripherals For Computer, Printer And Networking Equipments, Repairing Of Computers & Printers And Toner Refilling In Various Type Of Printers For Offices Situated Under O&M Circle Gwalior, Mpmkvvcl Gwalior , Computer/Pc/Desktop (Hp, Acer , Ibm , Compaq , Hcl , Hcl Infinity, Lenovo, Dell) , Ram (Ddr-3 Ram 8 Gb) , Ram (Ddr-3 Ram 4 Gb) , Ram (Ddr-4 Ram 4 Gb) , Ram (Ddr-4 Ram 8 Gb) , Hard Disc (Usb External 1 Tb) (Segate/Hitachi/Toshiba/Sony/Wd) , Hard Disc (Sata 1 Tb) (Segate/Hitachi/Toshiba/Wd) , Hard Disc (Sata 500 Gb)/(Segate/Hitachi/Toshiba/Wd) , Hard Disc (Sata 500 Gb)/(Segate/Hitachi/Toshiba/Wd)/Refurbished , Hard Disc (Sata 1 Tb) (Segate/Hitachi/Toshiba/Wd)Refurbished , Ssd 1 Tb (Segate/Wd/Toshiba) , Ssd 500 Gb(Segate/Wd/Toshiba) , Processor Fan (For Core 2 Duo) , Processor Fan (For Core I3 And Above) , Smps 500W (Intex/Frontech/Zebronic/Enter) , Smps Repairing , Graphic Card (2 Gb) , Pci Lan Card , Power Cable 1.5 Mtr , Vga Cable 1.5 Mtr , Keyboard+Mouse Combo(Logitech/Hp/Dell) , Wireless Keyboard+Mouse Combo(Logitech/Hp/Dell) , Key Board (Logitech/Hp/Dell) , Mouse (Logitech/Hp/Dell) , Formating Servicing Of Computer Re-Installation Of Os And Relevent Software , Atx Cabinet With Smps(Intex/Zebion) , Atx Cabinet Without Smps(Intex/Zebion) , Dvd Writer Sata (Lg/Asus/Samsung) , Mother Board Repairing , Power Cable 3Mtr , Vga Cable 3 Mtr , New Mother Board Dg61 Including Installation (Zebronics,Other Compatible) , New Mother Board Dg81 Including Installation Zebronics(Other Compatible) , New Mother Board Dg 110 Series Including Installation Zebronics(Other Compatible) , Hdmi Cable 1.5M , Hdmi Cable 3M , Processor I3 3Rd Gen And Above , Processor I3 7Th Gen And Above , Servicing And Repairing Of Tft/Ledmonitor (Damaged Not Included) , Lcd/Led 15/15.5/16 Lg/Samsung/Hp/Dell/Zebronics , Lcd/Led 18.5/19.5 Lg/Samsung/Hp/Dell/Acer/Lenovo , New Mother Board Dg 310 Series Including Installation Zebronics , Led Panel Replacement 18.5 , Tft Panel Replacement 15 , Processor I5 3Rd Gen And Above , Processor I5 7Th Gen And Above , Tft/Led Monitor Reparing (Power Supply Circuit) , Tft/Led Monitor Reparing (Display Unit) , All In One Pc Power Adopter(Acer/Lenovo) All Models But Compatible Make , Hdd Cable Sata , Sata Power Connector , Cmos Battery , Laser Printer And Its Accessories Hp-1020, Hp-1505N, Hp P-1108 And Same Type Series , Opc Drum Compatible , Logic Card Compatible , Pcr Roller Compatible , Chip Replacment Compatible , Bullet For Printer Cartridge , Doctor Blade Compatible , Wiper Blade Compatible , Magnet Roller Compatible , Reffling Toner Including Powder 120Grm , Reffling Toner Including Powder 80Grm , Pressure Roller Compatible , Teflon Paper Compatible , Fuser Unit , Engine Control Card , Relay , Moter , Paper Senser , Gear Assembly , Paper Pickup Assemble , Power Supply Card Reparing , Power Supply Card , Networ Card , Cartridge Senssor , Scanner Unit , Scanner Cable , Screen Panel , Laser Unit For Photocopy , Paper Try , Printer New Carrtidge Original Make All Models , Printer Complete Base , Printer Servicing , Printer Cable 2 Mtrs , Canon Mf 244, 3010, 274Dn,Hp Mfp-128, M208dw Series And Same Type Series , Opc Drum Compatible , Logic Card Compatible , Pcr Roller Compatible , Chip Replacment Compatible , Bullet For Printer Cartridge , Doctor Blade Compatible , Wiper Blade Compatible , Magnet Roller Compatible , Reffling Toner Including Powder 120Grm , Reffling Toner Including Powder 80Grm , Pressure Roller Compatible , Teflon Paper Compatible , Fuser Unit , Engine Control Card , Relay , Original Cartridges Of All Canon (All Mentioned Above) , Other Parts Canon Mf 244, 3010, 274Dn,Hp Mfp-128, M208dw , Paper Senser , Gear Assembly , Paper Pickup Assemble , Power Supply Card Reparing , Power Supply Card , Networ Card , Cartridge Senssor , Scanner Unit , Scanner Cable , Screen Panel , Laser Unit For Photocopy , Paper Try , Printer Complete Base , Printer Servicing , Ups & Accessories (Samtek, Libert Iton,Microtek, Unline, Umax, Iball , Power Etc (0.5 To 1 Kva) , Transformer Charging Isolated 12 V Ac , Ups Charging Unit , Pcg Logic Card 600 Va/800 Va , Mosfet Regulator Component , Logic Card Repairing , Battery 12 V, 7 Ah Smf , Battery 12 V, 18 Ah Smf , Ups 1 Kva(Microtek/Luminous/Elnova) , Ups 650 Va (Microtek/Luminous) , Ups 650 Va (Intex/Zebion/Frontech) , Battery 12 V, 21/24 Ah Smf , Battery 12 V, 65 Ah Smf , Networking Equipments And Cabling (D-Link/Tyco/Dax/ Netgear/Tenda/Tp-Link, Networking Equipment) , Switch 5 Port 10/100 Mbps Fast Ethernet Switch , Switch 8 Port 10/100 Mbps Fast Ethernet Switch , Switch 16 Port 10/100 Mbps Fast Ethernet Switch , Switch 24 Port 10/100 Mbps Fast Ethernet Switch , Power Adopter 5V For 8/16/24 Port Lan Switch , Switch/Router Reparing , Supply Of Rj 45 Connector (Each) , Supply Of Rj 45 (100 Qty) Box , Supply Of Cat6 Cable (100Mtr) Box , Supply Of Cat6 Cable (305Mtr) Box , Patch Cord1.5 Mtr , Patch Cord 3Mtr , Patch Cord 5Mtr , Patch Cord 10Mtr , Patch Cord 15Mtr , Patch Cord 20Mtr , Lan Tester With Battery , Supply Of Rj45 With Cremping (Each) , Other Network Equipments (D-Link/Tyco/Dax/ Netgear/Tenda/Tp-Link/D-Link) , Installation Of Box With Cremping (Each) , Media Convertor 5V 1.5Amp/1 annual periodical maintenance , Ofc Media Convertor Single Mode , Repairing Of Power Supply Circuit Of Cisco Switch , Compatible Cartridges(Make-Lapcare,Foxon,Alphabet,Prodot Etc Any Others) , New Printer Cartridge 12A , New Printer Cartidge 88A , New Printer Cartridge 36A , New Printer Cartridge 77A , New Printer Cartridge 337A , New Printer Cartridge 925 , New Printer Cartridge 110A , New Printer Cartridge 136A , New Compatible Brother Cartridge(Drum Unit Plus Toner Unit) All Series Dcp-B7535dw,Hlb2000d , Cartridge For Dot Matrix Printer (Wep, Epson Lq1150, Tvs Msp 245,345, Pro X900) (Model No . Wipro Dot Matrix 1070+, Model No . Tvs Msp 245, Model No . Tvs 250, Model No . Tvs Msp 345, Model No . Tvs Pro X900, Model No . Epson Lq 1150 , Cartridge , Ribbon Only , Brother Hl Dcp-B7535dw,B2000d Series And Other Same Series , Opc Drum , Logic Card , Pcr Roller , Chip Replacment , Bullet For Printer Cartridge , Doctor Blade , Wiper Blade , Magnet Roller , Reffling Toner Including Powder 120Grm , Reffling Toner Including Powder 80Grm , Pressure Roller , Teflon Paper , Fuser Unit , Engine Control Card , Relay , Moter , Paper Senser , Gear Assembly , Paper Pickup Assemble , Power Supply Card Reparing , Power Supply Card , Networ Card , Cartridge Senssor , Scanner Unit , Scanner Cable , Screen Panel , Laser Unit For Photocopy , Paper Try , Printer New Carrtidge , Printer Servicing , Printer Complete Base , Cctv Cameras Item Only Original(Cp Plus, Hikvision) , Camera 2.4 Mp Bullet , Camera 2.4 Mp Dom , Camera 2Mp Ip Bullet , Camera 2Mp Ip Dom , Dc Pin (Each) , Bnc Connector Each , Cctv Camera Installation Charege , Hard Disk 1Tb Survilance , Hard Disk 2Tb Survilance , Dvr 4 Channel , Dvr 8 Channel , Dvr 16 Channel , Dvr 32 Channel , Nvr 4 Channel , Nvr 8 Channel , Nvr 16 Channel , Nvr 32 Channel , Power Supply 4 Channel , Cctv Cable Per Meter , Power Supply 8 Channel , Power Supply 16 Channel , Power Supply 32 Cahnnel , Poe Switch 4 Port , Poe Switch 8 Port , Service Call For Cctv (Each) , Miscellaneous Items [ Segate/Toshiba/Western Digital, Samsung/Lg/Hp/Dell Pos Machines Make Razorpay/Mosamee/Others , External Dvd Writer , Hdmi Cable For Projector 15 Mtr , Vga Cable For Projector 15 Mtr , Thermoal Printer Power Cable , Thermoal Printer Paper Roll , Thermoal Printer Servcing , Pos Machine Power Adapter , New Pos Machine , Pos Machine Battery 2600 Mah , Pos Machine Battery 3500 Mah , Pos Machine Battery 5000Mah , Pos Machine Servicing/Reparing , Portable Blutooth Printer For Spot-Billing (Tvs/Rugtek) , Thermal Paper Roll 3 Inch , Normal Paper Roll 3 Inch , Usb Wifi Dongle , Usb Male - Female Extension , Usb To Ethernet Cable , Spike 5 Socket With 5 Meter Power Cable(Anchor/Orpat) , Laptop Parts For Hp, Acer , Ibm , Compaq , Dell, Lenovo, Wipro, Hcl [Hp Compaq 8510P, Hp Compaq 6710B, Hp Probook 4510S, Dell Vostro 1015] , Laptop Key Board , Mouse Pad , Laptop Screen , Ram Ddr 1 (1 Gb) , Ram Ddr 2 (1 Gb) , Cd / Dvd / Writter Ide. , Cd / Dvd / Writter Sata , Hard Disk 500 Gb , Hard Disk 1 Tb , Battery Of Laptop , Mother Board , Laptop Charger , Service Charge , Laptop Bag , Scanner [Epson Gt 1500/Canon Lide Series, Others Accessories Misc , Fuser Rod , Gear Assembly , Sensor , Service Charge For Repair , Riffiling Toner (Prodot/Idtl) , New Cartridge Canon , Pressor Roller , Teflon , Fuser Unit , Mini Speaker Wirless Ac Power(Fingers,Portronics) , Mini Speaker With Usb Power(Portronics) , Pen Drive(Sandisk) 128Gb , Quick Heal Antivirus 1U/1Y , Quick Heal Antivirus 3U/1Y , Air Blower 500W (Aeronox/Cheston/Black Decker) , Pen Drive (Sandisk) 32 Gb , 500 Gb Hdd (Acer All In One Pc) , 500 Gb Ssd (Acer All In One Pc) , Ram Dd4 4Gb( Acer All In One Pc) , Ram 8Gb Dd4 (Acer All In One Pc) , Pendrive (Sandisk) 64 Gb
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 6
Madhya Pradesh View Result →
15.
Banking and Finance #10842070 AOC
Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - Work Covers Comprehensive Maintenance Of Hardware (Such As Computers, Printers, Scanners, Networking Components, Etc. Of Different Makes & Models). Various Softwares Installed In The Commissionerate, Assistance In Video Conferencing And Preventive And Corrective Maintenance Of All Computer Systems And Peripherals, Servicing And Repair Of Printers, Scanners, And Related Hardware, Troubleshooting Of Software, Operating Systems, Network Related Issues And Any Other Work Related To Computers, Networking Etc Given By Superintendent (Systems) Or Any Other Officer Or Staff Of Cgst & Central Excise Nagpur-I Commissionerate Or By Officer Or Staff Of Cco, Nagpur Zone. Comprehensive Amc Of Cctv Including Taking Backup Of Cctv Cameras, Surveillance Network, And Allied Equipment To Ensure Uninterrupted Recording And Monitoring And Also Make Sure The Cctv Are Working 24*7 On All Days And Vendor Must Provide All The Spare Parts Or Any Other Items Required For The Proper Working Of Cctv And This Office Does Not Provide Any Other Fees Or Charges Other Than Maintenance Of Departmental Website “Cgstnagpur.Gov.In” Including Updating And Uploading Of Documents On Departmental Website And Complete Scope Of Work Related To Amc Of Departmental Website
Contract Date: Ref. Documents Contract Value : ₹ 12.18 Lakh
Government Departments No of Bidders 4
Maharashtra View Result →
Delhi View Result →
17.
Information and Broadcasting #10811892 Price Bid
Tender For E-Tender For The Supply, Installation, Integration, Testing, And Commissioning Of Equipment, Computer Hardware, Software, And Accessories For Cinematography, Digital Intermediate, Audiography, Direction & Screenplay Writing, Film Editing, And Animation & Visual Effects Sections, On Academic Pricing On Turnkey Basis, Along With Comprehensive Onsite Warranty For Three (3) Years , Direction And Screenplay Writing Section - Equipment Requirements , Smart Tvpc Dell Pro Max Tower T2 - Intel Core Ultra 9 285 (36 Mb Cache, 24 Cores, 24 Threads, 1.9 Ghz To 5.6 Ghz, 65W), 64Gb (2 X 32 Gb) Ddr5 (5600 Mt/S, Non-Ecc), Nvidia Geforce Rtx 5090 32Gb Gddr7, 3Xdp, 1Xhdmi, 1Tb Ssd Tlc With Dram M.2 2280 Pcie Gen4 Sed Ready/ Dell Pro Max Tower T2 With 1500W (80 Plus Platinum) Psu V2 /Windows 11 Pro / 5 Yrs Support , Smart Tv Sony Bravia 3 Series 189 Cm (75 Inches) 4 K Ultra Ai Smart Led Google Tv , Mac Studio M3 Mac Studio, Apple M3 Ultra Chip 28-Core Cpu With 20 Performance Cores And 8 Efficiency Cores 60-Core Gpu Hardware-Accelerated Ray Tracing 32-Core Neural Engine 819Gb/S Memory Bandwidth, 256Gb Unified Memory, 2Tb Ssd, Keyboard & Mouse , External Hard Drive Seagate One Touch 20Tb Usb 3.0 Portable Hdd , Printer Hp Laserjet Mfp M438Dn Multi-Function Monochrome Laser Printer (Toner Cartridge) , Directors Viewfinder Alan Gordan Enterprises Mark Vb Directors View Finder , Video Assist Monitors Blackmagic Video Assist 5 3G 5-Inch Full Hd Lcd Touchscreen 3G-Sdi And Hdmi Inputs/Outputs Supports Up To 1080P60 Recording , Final Draft Final Draft Software Full License (Industry Standard With Life Time License) , Continuity Camera / Script Notes Camera Canon Eos R50 Mirrorless Camera Body With Rf - S 18 - 45 Mm F/4.5 - 6.3 Is Stm , Walkie-Talkies, Head Phones (Sets) Aspera V-9 License Free Walkie Talkie With Standard Accessories Viz Battery, Belt Clip, Rapid Charger And Adaptor, Helifex Antenna, User Manual. , Portable Bluetooth/Monitor Speakers (On-Set Use) Jbl Xtreme 3, Wireless Portable Bluetooth Speaker, Pro Sound With Powerful Bass Radiators, Built-In Powerbank, Partyboost, Ip67 Water & Dustproof, Aux & Type C (Blue, Without Mic) , Digital Clap Board Tribe7 Blackslate7 7.5 Clapperboard E-Image Cb-03 Advanced , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Digital Intermediate Section - Equipment Requirements , Software Davinci Resolve Software Studio Version , Software Adobe Package Software (1 Year Subscription Yearly To Be Renewed) , Software Easy Dcp Software For Resolve , Color Correction Panel Black Magic Design Davinci Resolve Mini Panel , Color Correction Panel Black Magic Design Davinci Resolve Micro Panel , Imac Mac Studio, Apple M3 Ultra Chip 28-Core Cpu With 20 Performance Cores And 8 Efficiency Cores 60-Core Gpu Hardware-Accelerated Ray Tracing 32-Core Neural Engine 819Gb/S Memory Bandwidth, 256Gb Unified Memory, 2Tb Ssd, Keyboard & Mouse With 1-Year Support , Imac Imac, Apple M4 Chip 10-Core Cpu With 4 Performance Cores And 6 Efficiency Cores 10-Core Gpu Hardware-Accelerated Ray Tracing 16-Core Neural Engine 120Gb/S Memory Bandwidth, 2Tb Ssd, 32Gb Unified Memory, 60.96 Cm (24″) 4.5K Retina Display 4480X2520 Resolution At 218 Pixels Per Inch With Support For 1 Billion Colours With 1-Year Support , Imac Mac Keyboard And Mouse Usb Hub 50000 X 1 No. , Dell Tower Work Stations Dell Pro Max Tower T2 / Intel Core Ultra 9 285 (36 Mb Cache, 24 Cores, 24 Threads, 1.9 Ghz To 5.6 Ghz, 65W) / 64Gb: 2 X 32 Gb, Ddr5, 5600 Mt/S, Non- Ecc / Nvidia Geforce Rtx 5090 32Gb Gddr7 3Xdp 1Xhdmi / 1Tb Ssd Tlc With Dram M.2 2280 Pcie Gen4 Sed Ready / Dell Pro Max Tower T2 With 1500W (80 Plus Platinum) Psu V2 / Windows 11 Pro / 5Yrs Support , Dell Tower Work Stations Logitech Mk120 Usb Keybord And Mouse , Dell Tower Work Stations Photoshop System 1 Year Licence Subcription To Be Renewed Annually , Monitor Dell Pro 27 Plus 4K Usb-C Hub Monitor - P2725Qe , Monitor Dell Pro 27 Plus Monitor - P2725H / 5Y Basic Advanced Exchange Service , Monitor Eizo Cg319X-4K / 31.1 Inches,4096X2160,350Cd/M2,Dp,Hdmi,Adobe Rgb, Built In Sensor , Tv Sony Bravia 4K Uhd Tv 65Inch , External Hard Disk Samsung Ssd 4 Tb External Hdd , External Hard Disk Seagate One Touch Backup Plus 5Tb Hdd External , Di Equipments Blackmagic Design Capture, Card Ultrastudio 4K Mini , Di Equipments Black Magic Design Ultrastudio Monitor 3G For Mac 15000 X 4 Nos , Di Equipments Black Magic Design Link Card 4K Extreme 12G , Speaker & Headphones Jbl Stage 260F, Stage 245C, Stage 240H, Stage 200P + Denon Avrx- 250 Bituminous Av Receiver 5.1 Home Theatre , Speaker & Headphones Jbl Sb180 Speakers , Speaker & Headphones Akg K52 Headphones , Accessories Wacom Intuos Bluetooth Ctl-6100/K0-Cx Digital Graphics Pen Tablet For Drawing (Black) Medium (10.4-Inch X 7.8-Inch) , Accessories Hdmi 2.1 -5 Metres , Accessoriest Thunderbolt 4(Usb-C) Pro Cable (3 Metres) , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Animation & Visual Effects - Equipment Requirements , System Lenovo Think Station Px Workstation | 2 X Intel Xeon Gold 5420+ Processor (2.00 Ghz Up To 4.10 Ghz) | 4 X 128 Gb Ddr5-4800Mt/S (Rdimm, Ecc) | 4 X 12 Tb 7200Rpm Hdd 3.5 Sata Enterprise | Nvidia Rtx A6000 48Gb | Intel Eagle Stream C741 Dual Processor Motherboard | Raid 10 (4 Drives Min) | 1 X 1 Tb Ssd M.2 2280 Pcie Gen4 Performance Tlc Opal | 1 X 4 Tb Ssd M.2 2280 Pcie Gen4 Performance Tlc Opal | Integrated Ethernet | 2 X Thermal Kit 250W | Windows 11 Pro 64Bit Pre-Loaded | Wired Keyboard & Mouse | 3 Years Onsite Warranty / Dell Ultrasharp 27 4K Thunderbolt Hub Monitor - U2725Qe , System Dell Pro Max Tower T2 / Intel Core Ultra 9 285 (36 Mb Cache, 24 Cores, 24 Threads, 1.9 Ghz To 5.6 Ghz, 65W) / 64Gb: 2 X 32 Gb, Ddr5, 5600 Mt/S, Non-Ecc / Nvidia Geforce Rtx 5090 32Gb Gddr7 3Xdp 1Xhdmi / 1Tb Ssd Tlc With Dram M.2 2280 Pcie Gen4 Sed Ready / Dell Pro Max Tower T2 With 1500W (80 Plus Platinum) Psu V2 / Windows 11 Pro / 5Yrs Support , System Dell Pro Max Tower T2 / Intel Core Ultra 9 285 (36 Mb Cache, 24 Cores, 24 Threads, 1.9 Ghz To 5.6 Ghz, 65W) / 64Gb: 2 X 32 Gb, Ddr5, 5600 Mt/S, Non-Ecc / Nvidia Geforce Rtx 5070 12Gb Gddr7 3Xdp 1Xhdmi / 1Tb Ssd Tlc With Dram M.2 2280 Pcie Gen4 Sed Ready / Dell Pro Max Tower T2 With 1500W (80 Plus Platinum) Psu V2 / Windows 11 Pro / 5Yrs Support , Software Adobe Creative Cloud All Apps Education Named Subscription License , Software Ai Tools (Google Flow) , Software Davinci Fusion Studio Annual-Commercial , Software Cine Tracer , Software Autodesk Maya Subscription New- Commercial , Software Houdini Academic License , Software Nuke Studio 1-Year Subscription , Laptop Dell Pro Max 16 (Mc16250) Xcto Base / Intel Core Ultra 5 235H, Vpro Enterprise (18Mb, 14 Cores, 14 Threads, Up To 5.00 Ghz Turbo, 45W) / 16Gb: 2X8Gb, Ddr5, 5600 Mt/S, Sodimm, Dual Channel, Non-Ecc / Nvidia C64 Rtx Pro 1000 Blackwell 8Gb Gddr7 / 16 Fhd+ Lcd With 300 Nits, Non- Touch, Fhd Hdr Rgb Camera, Microphone, Wlan / Intel Wi-Fi 6E Ax211, 2X2, 802.11Ax, Bluetooth 5.3 Wireless Card / 512Gb, M.2 2230, Gen4 Pcie Nvme, Ssd, Class 35 / 130W Ac Adapter, Type C (Tco10) / Windows 11 Home / 5Yrs Prosupport Nbd , Smart Tv Smart Tv-32 Inch , Moniters Dell Pro 27 Plus 4K Usb-C Hub Monitor - P2725Qe / 3Y Basic Advanced Exchange Service , Other Equipments Logitech Mk120 Usb Keybord And Mouse , Other Equipments Xp-Pen-Deco01 V3 , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Film Editing - Equipment Requirements , Apple Imac Machines Imac, Apple M4 Chip 10-Core Cpu With 4 Performance Cores And 6 Efficiency Cores 10-Core Gpu Hardware-Accelerated Ray Tracing 16- Core Neural Engine 120Gb/S Memory Bandwidth, 2Tb Ssd, 32Gb Unified Memory, 60.96 Cm (24″) 4.5K Retina Display 4480X2520 Resolution At 218 Pixels Per Inch With Support For 1 Billion Colours With 1-Year Support , Mac Studio M3 Mac Studio, Apple M3 Ultra Chip 28-Core Cpu With 20 Performance Cores And 8 Efficiency Cores 60-Core Gpu Hardware-Accelerated Ray Tracing 32-Core Neural Engine 819Gb/S Memory Bandwidth, 256Gb Unified Memory, 2Tb Ssd, Keyboard & Mouse , Apple Cinema Display 27 Apple Studio Display 5K Retina Display 68.29 Cm / 27 (Diagonal) 5K Retina Display 5120X2880 Resolution At 218 Pixels Per Inch 600 Nits Brightness Support For 1 Billion Colours Wide Colour (P3) True Tone Technology With 1-Year Support , Sennheiser Headphones Hd 280 , Jbl Studio Jbl Monitors/Speakers , External System Connected Ssd External Wd 1Tb Drive , Licenses For Each Software Avid Media Composer Edu 1-Year Subscription New License , Licenses For Each Software Davinci Resolve Software , Licenses For Each Software Fcp Studio , Licenses For Each Software Adobe Premiere Pro Academic License 1-Year Subscription - 3 Nos. , External Backup Hard Drive Wd My Book Backup Drive - 12 Tb , Keyboard/ Mouse Logitech Mk120 Usb Keybord And Mouse , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Audiography - Equipment Requirements , Dubbing/Mixing Room - Hardware And Software Protool Ultimate Edu Subscription For Student/Teacher - New , Dubbing/Mixing Room - Hardware And Software Dolby Atmos Renderer , Dubbing/Mixing Room - Hardware And Software Pace Ilok 3 Usb - C Type , Dubbing/Mixing Room - Hardware And Software Merging Techologies Hapi Mkiii , Dubbing/Mixing Room - Hardware And Software Merging Technologies Ada8V3S 8 Ch Mic/Line Ad&Da 192 Khz , Dubbing/Mixing Room - Hardware And Software Merging Technologies Anubis Pro Sps , Dubbing/Mixing Room - Hardware And Software Avid S1 (Includes 1 Year Hw Warranty) , Dubbing/Mixing Room - Hardware And Software Avid S1 Extended Hw Support - Second Year , Dubbing/Mixing Room - Hardware And Software Avid Dock , Dubbing/Mixing Room - Hardware And Software Focusrite Isa428 Mkii 4-Channel Microphone Preamp , Dubbing/Mixing Room - Hardware And Software Apple Mac Studio M3 Ultra Chip With 28-Core Cpu, 60-Core Gpu, 32-Core Neural Engine, 96Gb Unified Memory, 1Tb Ssd Storage, Macos , Dubbing/Mixing Room - Hardware And Software Applecare+ For Mac Studio (M4 Max / M3 Ultra) , Dubbing/Mixing Room - Hardware And Software Sonnet Rackmac Studio Enclosure - 3U Pro Rackmount Enclosure To Install And Secure One Or Two Mac Studio Computers In A Standard 19-Inch Rack , Dubbing/Mixing Room - Hardware And Software Logic Pro - Professional Music Production , Dubbing/Mixing Room - Hardware And Software Steinberg Nuendo 14 - Software (Standard) , Dubbing/Mixing Room - Hardware And Software Benq 27 Inch 1080P Fhd Ips Monitor|Height Adjustable - 3 Year Warranty (2 Display For Each System) , Dubbing/Mixing Room - Hardware And Software Samsung 65 Tv For Console Room - 1.63 M (65) Crystal 4K Uhd Smart Tv , Dubbing/Mixing Room - Hardware And Software Samsung 55 Tv For Console Room - 1.38 M (55) Crystal 4K Uhd Smart Tv , Dubbing/Mixing Room - Hardware And Software Lg 4K Uhd Hybrid Projector , Dubbing/Mixing Room - Hardware And Software Motorised Projector Screen, 10 X 8 Feet, 150 Diag, 4:3 Aspect Ratio, 1080P-3D-4K With Remote , Dubbing/Mixing Room - Hardware And Software Logitech Mx Keys S Performance Combo - Black (Incl Mx Master 3S, Mx Keys S & Mx Palm Rest) , Dubbing/Mixing Room - Hardware And Software Blackmagic Design Ultrastudio Monitor 3G Sdi/Hdmi Playback Device , Dubbing/Mixing Room - Hardware And Software Thunderbolt 3 Cable (6.6, 40 Gb/S, Active) , Dubbing/Mixing Room - Hardware And Software Usb-C Digital Av Multiport Adapter (1 For Each System) , Dubbing/Mixing Room - Hardware And Software Usb C Hub 10Gbps 6-In-1 Multiport Adapter With 4K@60Hz Hdmi, Type A& C 3.2 Data Ports, 100W Pd For Mac , Dubbing/Mixing Room - Hardware And Software Tt0080831/ Netgear Av Line M4250-12M2Xf 12X2.5G And 2Xsfp+ Managed Switch , Dubbing/Mixing Room - Hardware And Software Izotope Rx 11 Standard , Dubbing/Mixing Room - Hardware And Software Mcdsp Sa2 Dialog Processor , Dubbing/Mixing Room - Hardware And Software Waves Diamond Bundle , Dubbing/Mixing Room - Hardware And Software Fab Filter Mixing Bundle , Dubbing/Mixing Room - Hardware And Software Audio Design Desk Subscription (2 Years) , Dubbing/Mixing Room - Hardware And Software Nugen Loudness Toolkit-2 , Dubbing/Mixing Room - Hardware And Software Sis Edicue , Dubbing/Mixing Room -Mics And Speakers Neumann Ma 1 Monitor Alignment Microphone And Calibration System , Dubbing/Mixing Room -Mics And Speakers Multi-Channel Extension For Neumann Ma 1 System Software , Dubbing/Mixing Room -Mics And Speakers Neumann Kh 150 Dsp Powered Studio Monitor , Dubbing/Mixing Room -Mics And Speakers Height Adjustable Stands For Neumann Kh 150 , Dubbing/Mixing Room -Mics And Speakers Neumann Kh 120 Ii Dsp Powered Studio Monitor (4 For Surrounds & 4 For Tops) , Dubbing/Mixing Room -Mics And Speakers Neumann Lh 32 Wall Mounts With Pan And Tilt (4 For Surrounds & 4 For Tops) , Dubbing/Mixing Room -Mics And Speakers Neumann Kh 870 Ii Dsp Dual 10 Studio Subwoofer , Dubbing/Mixing Room -Mics And Speakers Neumann Kh 310 3-Way Reference Studio Monitors Pair (Left And Right) , Dubbing/Mixing Room -Mics And Speakers Kali Lp 6 (Talk Back Speaker Pair For Recording Booth) , Dubbing/Mixing Room -Mics And Speakers Sennheiser Hd 200 Pro Closed-Back Studio Headphones , Dubbing/Mixing Room -Mics And Speakers Neumann Tlm 103 Stereo Set- Nickel (2 X Tlm 103 Ni + Ea1 In Aluminium Case) , Dubbing/Mixing Room -Mics And Speakers Sennheiser E945 Supercardioid Dynamic Vocal Microphone , Dubbing/Mixing Room -Mics And Speakers Rs-719 Heavy Duty Microphone Boom Stand , Dubbing/Mixing Room -Mics And Speakers Rs-521 Medium Weight Notepad/Lyric Stand , Dubbing/Mixing Room -Mics And Speakers Presonus Hp4 Headphone Annual Periodical Maintenance , Dubbing/Mixing Room -Mics And Speakers Promise Pegasus R4 16 Tb Raid With 3 Years Warranty , Dubbing/Mixing Room -Mics And Speakers Rs T3 Pop Shield , Dubbing/Mixing Room -Mics And Speakers 4-Port Professional Hdmi 4K Automatic Video Switch With Fast Switching , Dubbing/Mixing Room -Mics And Speakers Audio Cables And Connectors (Set) And Testing And Calibration , Dubbing/Mixing Room -Mics And Speakers Audio Rack - Black Color With 7 Pairs L Angle With Screws & Nuts & 15 Amps Power Supply With Side Panel And Heavy Duty Wheels , Dubbing/Mixing Room -Mics And Speakers Active Optical Hdmi Cable 25M , Dubbing/Mixing Room -Mics And Speakers Heavy Duty Cat6 Cable 25M , Dubbing/Mixing Room -Mics And Speakers Usb 2.0 Extender Over Cat5E/Cat6 Cable (Rj45) - Up To 165Ft (50M) - High Speed Usb Port Extender Adapter Kit - Powered , Edit Suite- Hardware And Software Pro Tools Studio Annual Paid Annual Subscription Edu , Edit Suite- Hardware And Software Pace Ilok 3 Usb-C Type , Edit Suite- Hardware And Software Neumann Mt 48 Usb-C Audio Interface , Edit Suite- Hardware And Software Neumann Ndh 20 , Edit Suite- Hardware And Software Neumann Kh 80 Dsp Powered Studio Monitor , Edit Suite- Hardware And Software Apple Mac Mini Apple M4 Chip With 10‑Core Cpu, 10‑Core Gpu, 16‑Core Neural Engine, 32Gb Unified Memory, 512Gb Ssd Storage , Edit Suite- Hardware And Software Applecare+ For Mac Mini (M4) , Edit Suite- Hardware And Software Sonnet Rackmac Mini (2024+) - 2U Enclosure To Mount And Secure Up To Three Mac Minis In A Standard 19-Inch Rack , Edit Suite- Hardware And Software Logic Pro - Professional Music Production , Edit Suite- Hardware And Software Neumann Rime Immersive Binaural Monitoring Plug-In , Edit Suite- Hardware And Software Waves Diamond Bundle , Edit Suite- Hardware And Software Lacie 4 Tb External Hdd Thunderbolt Connected , Edit Suite- Hardware And Software Logitech Mx Keys S Performance Combo - Black (Incl Mx Master 3S, Mx Keys S & Mx Palm Rest) , Edit Suite- Hardware And Software Benq 27 Inch 1080P Fhd Ips Monitor|Height Adjustable - 3 Year Warranty (2 Display For Each System) , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Inter Connection And Storage Equipment Requirements , Storage Centralized Parking Storage For All Departments: Eonstor Gs 3000 G3 3U/16Bay,Cloud-Integrated Unified Storage, Supports Nas, San, Object Protocol And Cloud Gateway, Dual Redundant Controller Subsystem Including 4X12Gb/S Sas Exp. Ports, 4X25Gbe Ports(Sfp28) +4X Host Board Slots,4X16Gb Memory, 2X(Psu+ Fan Module), 2X(Supercap. + Flash Module), 16Xdrive Trays And 1Xrackmount Kit 32X 3.5 Hdd, Sas 12Gb/S, 22Tb, 7200Rpm 3U/16Bay Dual Redundant Controller Expansion Enclosure Including 4X 12Gb Sas Ports, 2X(Psu+Fan Module), 16Xgs Drive Trays, 2X 12G To 12G Sas Cable For Storage Or Expansion Enclosure With 12G Interface And 1Xrackmount Kit 4X 10G Base-Sr Sfp+ Transceiver, Lc, Multi-Mode 3 Years Standard Warranty , Storage Animation Department Blackmagic Cloud Store 80Tb With 1 Year Limited Manufacturers Warranty. , Storage Digital Intermediate Blackmagic Cloud Store 80Tb With 1 Year Limited Manufacturers Warranty. , Interconnection Dell Switch S4148T-On Dell Switch S4148T-On, 1U, 48 X 10Gbase-T, 4 X Qsfp28, 2 X Qsfp+, Io To Psu, 2Xpsu Dell Networking, Qsa Adapter, Qsfp+/Qsfp28 To Sfp/Sfp+/Sfp28 For Select Optics Only (Total-4Nos) Dell Networking, Transceiver, Sfp+, 10Gbe, Sr, 850Nm Wavelength (Total- 4Nos) Dell Networking Cable 100Gbe, Qsfp28 To Qsfp28, Passive Copper Direct Attach Cable, 1 Meter (Total-4Nos) Dell Networking Cable, Om4 Lc/Lc Fiber Cable, (Optics Required), 10 Meter (Total-4Nos) 5 Yrs Pro Support Nbd. , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Cinematography Requirements , Category A: Cameras & Lenses A1. Photography Kit- 1St Year Camera Body- 1St Year Sony A7R5 Body • 61Mp Full-Frame Exmor R Bsi Cmos Sensor • Bionz Xr & Ai Processing Unit • Ai-Based Real-Time Tracking Af System • 8K 24P, 4K 60P, Fhd 120P 10-Bit Video • 4K 16-Bit Raw Output; S-Log3/S-Cinetone • 9.44M-Dot Evf With 120 Fps Refresh Rate • 3.2 4-Axis Multi-Angle Touchscreen Lcd • 10 Fps Shooting With Af/Ae Tracking • 8-Stop 5-Axis Image Stabilization • Dual Cfexpress Type A/Sd Card Slots , Lcd Guard For Sony A7R5 Lcd Panel Guard , Prime Lens 1- 50Mm Sigma 50Mm F1.4 Dg Dn (E-Mount) Or Equivalent • E-Mount Lens/Full-Frame Format, Aperture Range: F/1.4 To F/16 • One Molded Glass Aspherical Element • Three Special Low Dispersion Elements • Super Multi-Layer Coating • Floating System & Large Diameter Design • Hyper Sonic Af Motor • Rounded Nine-Blade Diaphragm • Thermally Stable Composite Material • Brass Bayonet Mount • Compatible With Sigma Usb Dock , Uv Filter For Sigma 50Mm Lens Meco 72Mm Uv Filter , Prime Lens 2 35 Mm Sigma 35Mm F1.4 Dg Dn (E-Mount) Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/1.4 To F/16 • Five Sld Elements • One Aspherical Element, Four Hr Elements • Super Multi-Layer Coating • Stepping Motor Af System • Customizable Afl Button • Physical Aperture Ring; De-Click Switch • Rounded 11-Blade Diaphragm • Weather-Sealed Design , Uv Filter Sigma 35Mm F/1.4 Lens Meco 67Mm Uv Filter , Prime Lens 3 85 Mm Sigma 85Mm F1.4 Dg Dn (E-Mount) Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/1.4 To F/16 • Five Sld Elements • One Aspherical Element, Four Hr Elements • Super Multi-Layer Coating • Stepping Motor Af System • Customizable Afl Button • Physical Aperture Ring; De-Click Switch • Rounded 11-Blade Diaphragm • Weather-Sealed Desig , Uv Filter Sigma 85Mm F/1.4 Lens Meco 77Mm Uv Filter , Wide Lens 14Mm Sigma 14Mm F1.8 (E- Mount) Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/1.8 To F/16 • Three Fld Elements, Four Sld Elements • Four Aspherical Elements • Super Multi-Layer Coating • Hyper Sonic Af Motor, Manual Override • Rounded 9-Blade Diaphragm • Tsc Material, Brass Bayonet Mount , Zoom Lens 1 24-70Mm Sigma 24-70Mm F 2.8 Dg Dn I (E- Mount) Or Equivalent • Full-Frame | F/2.8 To F/22 • Fast & Lightweight Wide-To-Tele Zoom • Hla Autofocus • 6.7 Minimum Focusing Distance • Aperture Ring With Click & Lock Switches • Fld, Sld & Aspherical Elements • Nano Porous & Super Multilayer Coatings • Dust & Splash Resistant , Uv Filter Sigma 24-70Mm Lens Meco 82Mm Uv Filter , Zoom Lens 2 70-200Mm Sigma 70-200Mm F 2.8Mm Dg Dn Os Sport Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/1.8 To F/16 • Three Fld Elements, Four Sld Elements • Four Aspherical Elements • Super Multi-Layer Coating • Hyper Sonic Af Motor, Manual Override • Rounded 9-Blade Diaphragm • Tsc Material, Brass Bayonet Mount , Uv Filter Sigma 70-200Mm Lens Meco 82Mm Uv Filter , Telephoto Lens 150-600Mm Sigma 150-600Mm F 5-6.3 Dg Dn Os Sport Or Equivalent • Ef-Mount Lens/Full-Frame Format • Aperture Range: F/5 To F/22 • Two Fld Elements, Three Sld Elements • Super Multi-Layer Coating • Hyper Sonic Motor Af System • Os Image Stabilization • Fixed, Rotating Tripod Collar • Rounded 9-Blade Diaphragm , Uv Filter Sigma 150-600Mm Lens Meco 95Mm Uv Filter , Macro Lens 105Mm Sigma 105Mm F 2.8 Dg Dn Macro Art Or Equivalent • E-Mount Lens/Full-Frame Format • Aperture Range: F/2.8 To F/22 • One Sld Element • Super Multi-Layer Coating • 1:1 Magnification, 11.6″ Min. Focus • Hyper-Sonic Motor Af System • Custom Afl Button, Focus Limiter Switch • Physical Aperture Ring; De-Click Switch • Rounded 9-Blade Diaphragm • Weather-Sealed Desig , Uv Filter Sigma 105Mm F/2.8 Lens Meco 105Mm Uv Filter , Battery Sony Fz100 Battery Or Equivalent ( A7R5 & Fx3A) • Battery Type: High-Capacity Z-Series Rechargeable Lithium-Ion Battery • Voltage / Capacity: 7.2 Vdc / 2280 Mah (16.4 Wh) • Infolithium Feature, Dimensions: Approx. 51.7 × 38.7 × 22.7 Mm (W × H × D) • Weight: Approx. 83 G (3 Ozcompatibility: Supports Dozens Of Sony Cameras Including: O Alpha Series: A1, A1 Ii, A9, A9 Ii, A9 Iii, A7 Iii, A7R Iii, A7R Iv, A7 Iv, A7R V, A7S Iii, A7C, A7 C Ii, A7Cr, A6600, A6700 Cinema/V-Logging: Ilme-Fx3, Zv-E1, Zv-E10 Ii , Battery Charger Sony Dual Charger Bc-Zd1 (A7R5) • Battery Type: High-Capacity Z-Series Rechargeable Lithium-Ion Battery • Voltage / Capacity: 7.2 V / 2280 Mah (16.4 Wh) • Infolithium Support: Displays Remaining Battery Level On Camera Lcd • Compatibility: Sony Alpha Series (E.G., A1 Ii, A9, A7R Iv, A7 Iv, A6600), Zv Series (Zv-E1, Zv-E10 Ii) • Dimensions: Approx. 38.7 × 22.7 × 51.7 Mm (W × H × D) • Weight: Approx. 83 G (3.0 Oz) • Durability & Safety: Built-In Protection Circuitry To Prevent Overcharging/Overheating (Sony Oem) , Category A2. Video Kit Camera Body-1 (2 Year Continuity Project) Sony Fx6 • 4K Full-Frame 10.2Mp Cmos Exmor R Sensor • Dci 4K60P | Uhd 4K120 | 1080P240 • 15+ Stops Of Dynamic Range In S-Log 3 Electrical Installation • 1.3X And 2.0X Anamorphic De-Squeeze • Compact Form Weighs Less Than 2 Lb • Phase Detection Af/Face Tracking/Eye Af • Base 800-12,800 Iso / 320-409,600 Max • S-Cinetone, S-Log3, Hlg Modes • 10-Bit 4:2:2 Xavc-I/16-Bit Raw Output • Dual Cfexpress Type A/Sdxc Card Slots , Camera Body-2 (3Rd Year Song Project) Sony Fx3A • 12.1Mp Full-Frame Cmos Exmor R Sensor • Uhd 4K Up To 120 | 1080P Up To 240 • Compact Form For Cage-Free Operation • 10-Bit 4:2:2 Xavc S-I,16-Bit Raw Output • S-Cinetone/S-Log3/Hlg, 15+ Stops Dr • Detachable 2 X Xlr/Trs Adapter Handle • Phase Detection Af/Face Tracking/Eye Af • 80 To 409,600 Expanded Iso Range • Dual Cfexpress Type A/Sdxc Card Slots , Battery Sony Fz100 Battery , Panel Guard For Sony Fx3A Lcd Panel Guard , Lens Kit 18Mm, 24Mm, 35Mm, 50Mm, 85Mm, And 105Mm (2Nd And 3Rd Year) Dzo Film, Vespid Ii Prime 6-Lens Set Includes 18Mm,24Mm,35Mm,50Mm,85Mm And 105Mm • Full Frame/Vv | T1.9 To T22 Aperture • 18, 24, 35, 50, 85, And 105Mm Primes • Aspherical Element, Reduced Aberrations • 0.8 Mod Gears, 300° Focus Rotation • Cooke /I Technology Metadata • 80Mm Front Outside Diameter • Compact, Lightweight Design • Less Reflective, More Tactile Surface • Color Matched, Common Gearing And Length • Minimal Breathing And Distortion , Gimbal (3Rd Year Song Project) Rs4 Pro Combo • Lightweight Design With 10 Lb Payload • Combo With Focus Pro Motor • Oled Touchscreen With Auto Lock • 2Nd Gen Native Vertical Shooting • Automated Axis Locks • Joystick Or Bluetooth Mode Switching • Supports Wireless Transmitter, Lidar • Teflon-Coated Axes, Activetrack Pro • 13-Hour Operation Time , Battery Sony Bp-U70 Lithium Ion Battery- (Fx6) • Battery Type: Professional Lithium-Ion Battery (Bp-U Series) • Capacity: 72 Wh • Output Voltage: Approximately 14.4 V Dc Nominal (16.4 V Max) • Charging Time: Approximately 150 Minutes Using Sony Bc-U1A/U2A Charger • Compatibility: Select Sony Professional Camcorders Including Pxw-Fs7, Fx6,.. • Dimensions: 41.5 × 84.5 × 69.7 Mm (1.63 × 3.32 × 2.74 In) Weight: Approximately 450 G (15.9 Oz) • Operating Conditions: Discharge: -20 °C To +45 °C (-4 °F To +113 °F); Charge: 0 °C To +40 °C (32 °F To +104 °F) , Battery Charger Sony Dual Battery Charger Bc-U2A Batteries (Fx6) • Battery Compatibility: Supports Sony Bp-U90, Bp- U60, Bp-U60T, And Bp-U30 Lithium-Ion Batteries. • Charging Capacity: Simultaneously Charges Two Batteries, Optimizing Workflow And Reducing Downtime. • Charge Times: Bp-U90: Approximately 190 Minutes. • Ac Input: 100-240 Vac, 50/60 Hz, Suitable For Global Use. • Dc Output: 12 Vdc Via Integrated Cable, Providing 12 V Dc Power Output While Charging One Battery. • Power Output: 12 Vdc At 3 A (36 W) Via Barrel Connector. • Dimensions: 7.0 × 5.4 × 2.1 Inches (177 × 137 × 53.2 Mm). • Weight: 1.4 Lb (620 G). • Operating Temperature: 32 To 113°F (0 To 45°C). • Certifications: Compliant With Iec62368-1 Safety Standard. , Category B: Photography Lights Flash Light 1 Godox V1 Pro S Or Equivalent • Compatible With Sony Adi / P-Ttl • Output: 76Ws • Auto Zoom Control, Zoom Range: 28-105Mm • 2.4 Ghz X Wireless Radio System • Built-In Led Modeling Lamp • Tilts -7 To 120°, Rotates 330° • Round Head, Optional Magnetic Modifiers • 1.5 Sec Recycle Time, Hss Support • Includes Detachable Sub-Flash , Studio Light 1 Godox Ad 600 Pro Or Equivalent • Built-In 2.4 Ghz Wireless X System • Compatible With Most Ttl Systems • 600Ws, 1/256 To 1/1 Power Output • Lithium-Ion Battery Powered • Up To 360 Full-Power Flashes • Flash Duration: 1/220 To 1/10,100 Sec • 1/8000 Sec High-Speed Sync • 0.01-0.9 Sec Recycling Time • 38W Modeling Lamp • Stable Color Temperature Mode , Studio Light 2 Godox Qt 600 Iii Or Equivalent • 600 Ws, 5600K Color Temperature • 0.01-0.9 Sec Recycling • Flash Duration Hss: 1/26,100 Sec • Built-In Wireless X System • 32 Channels, 16 Groups • Optional X1, X2 & Xpro Transmitter • 1/256 To 1/1 Power Range • 40W Led Modeling Lamp , Softbox Octa Softbox Or Equivalent Jenie Beauty Box 105Cm , Light Stand Harison Heavy Light Stand Harison Heavy Light Stand (Set Of 2) , Strip Box Godox Strip Box 35X160 , Beauty Dish Godox W 550 Silver Eauty Dish With Grid Godox Beauty Dish W550 Sliver With Grid (Set Reflector 1 + Grid 1) , Snoot Godox Snoot , Batteries Eneloop 2000Mah Aa Rechargable Batteries (Set Of 4) , Charger Panasonic Bk 3Hcce Aa Charger , Trigger Godox It 30 Trigger With Flash For Sony Works With X Wireless Radio System Compatible With Sony Adi / P-Ttl Frequency: 2.4 Ghz Range: 328 32 Channels; 99 Ids High-Speed, 1St & 2Nd Curtain Sync Runs On Internal Rechargeable Battery Touchscreen Interface Compact & Portable Design Includes Usb-C Cable & Carry Bag , Category C: Camera Accessories (2Nd And 3Rd Year)Tripod-1 Tripod Manfrotto Mt055-X Pro 3 Or Equivalent • Versatile 3-Section Aluminum Tripod • Spreads To Just 3.5 Above The Ground • 63 Max Height • 23.2 Folded Length • Photo/Video Fluid Tripod Head • 15.4 Lb Load Capacity • All-Direction Photo Mode • Pan-And-Tilt Video Mode • Friction Control , Tripod-2 E Image 7080H • Fluid Head With Bowl Size 75Mm. • Plate With Both 1 /4And 3/8Screws , Memory Card Cf Express Type A 240Gb Or Equivalent (A7R5) & Fx6 , Memory Card Angelbird 1Tb Cf Express Type B Or Equivalent (Burano) , Memory Card Sony 480Gb Tough Card Cf Express Type A , Card Reader 1 Sony Mrw-G3 Cf E Type A Card Reader , Card Reader 2 Sony Mrw-G1 Type B Card Reader , Camera Bag Vanguard Veo 49Bf Camera Bag , Hard Case Camera Hard Case (Pelican Type) (Fx6 & Burano) Explore 7635 Hlb Hard Case For Fx6 & Burano , Camera Cage 1 Small Rig Cage For Sony A7R5 Or Equivalent • Formfitting Camera Cage • 1/4-20 & 3/8-16 Accessory Threads • Maintains Access To Cameras Hot Shoe • Arri-Style Locating Handle Included • Built-In Shoe Mounts, Anti-Twist Design • Threads To Mount Optional Accessories • Durable Aluminum Construction , Camera Cage 2 Small Rig Cage For Sony Fx6 Or Equivalent • Camera Top & Side Plates • Quick Release Baseplate • V-Mount Plate With D-Tap Power Cable • Horizontal & Vertical Mounting • 1/4-20 & 3/8-16 Accessory Threads • 3/8-16 Anti-Twist Threads • Durable Aluminum Construction • Baseplate With Folding V-Lock Plate • 15Mm Rod Clamps & 2 X 15Mm Rods , Mattee Box Mattee Box (Fx6 ) • Compact Matte Box Weighing Only 3.8 Oz • Carbon Fiber Box And Top Flag • Includes 4 X 5.65 Filter Tray • Includes 67/72/77/82-95Mm Adapter Rings • Works With Circular Filters Up To 92.5Mm • 2.2 Lb Maximum Load Capacity , Filters H&Y Nd Filters (0.3,0.6 & 0.9) & Uv Filters (Complete Set) • 0.5 To 3.0 Optical Density • Multicoating & Resistance Coating • Schott B270 Optical Glass • Fits 58-77Mm Lens Filter Threads • High-Grade 6063 Aluminum Construction • Size-Adjustable Adapter Ring • Darkens Entire Image Area • Twist To Attach In Seconds , Filters Polariser Filter (Fx6 & Burano) • Minimize Reflections And Glare • Reduces Haze And Blue Cast In Landscapes • Enhances Color And Tonal Saturation • Colorcore Water White Glass , Field Monitor Atomos Shinobi 7 4K Hdmi/Sdi Monitor • 7 1920 X 1200 Touchscreen Display • 4K60 Hdmi 2.0 In/Out, 2K60 3G-Sdi In/Out • 2200 Cd/M² Brightness • Hdmi/Sdi Cross Conversion • 2.5Mm Camera Control Port For Z Cam E2 • Dual Sony L-Series Battery Slots • Atomos; Atomhdr & 3D Lut Support • 10-Stop Dynamic Range • Supports A Variety Of Log Formats , Measuring Laser Distance Meter , Focus Chart , Colour Checker Calibrite Colorchecker Passport Video 2 (Ccppv2) , Cleaning Kit Lens Cleaning Kit (Professional) , Cables 1 Mtr Cable Hdmi To Hdmi , Cables 0.5 Mtr Cable Sdi To Sdi , Cables 5 Mtr Cable Sdi To Sdi , Cables 10 Mtr Cable Sdi To Sdi , Cables 10 Mtr Cable Hdmi To Hdmi , Cables 15 Mtr Cable Hdmi To Hdmi , Category D: Cine-Lineup Cinema Camera (2Nd Year Misc-En & Scene Project) Sony Burano 8K Digital Motion • Compact, Highly Mobile Design • Full-Frame Cmos 8.6K Sensor • 16 Stops Of Dynamic Range • In-Body Image Stabilization|E & Pl Mount • Dual-Base 800/3200 Iso Range • Electronically Variable 0.6-21Nd Filter • Phase Detection Af | Face/Eye Tracking • Full Frame & Super 35 Sensor Modes • Supports Multiple Frame Rates & Codecs • Dual Cfexpress Type B Card Slots , Monitor/ Recorder Shogun Ultra 7 & Recorder • Atomos 11, 12G-Sdi/Hdmi Conversion • 7 1920 X 1080 Touchscreen • Records Up To 8K Apple Prores Raw • Prores Raw + H.265 Dual Recording • Airglu Rf Wireless Sync, Gige, 6E Wi-Fi • 2000 Cd/M² Brightness • Arri/Canon/Red/Sony Camera Sdi Support • Avid Dnx Quicktime • Atomos Remoteview Via Subscription • Optional Ndi 4K Tx Pro Mode 1-Off , Focus System Tilta Nucleus M(Dual Motor) • 1000 Wireless Range • Two Lens Drive Motors • Motors Feature Integrated Receivers • 0.8 Mod Drive Gears • Focus, Iris, Zoom Hand Unit • Motors Daisy-Chain For Power • Right Handgrip With Focus Control • Left Handgrip With Iris And Zoom Control • Hard-Shell Waterproof Case Included , Memory Card Lexar 512Gb Cf Express Type B Card Diamond Series Or Equivalent , Battery Newell V Mount Battery (290 Watts) , Charger Newell V Mount Dual Charger , Lens Kit 8,24,35,50,75, 100Mm Zeiss Nano Prime 6 Lens Kit(18,24,35,50,75,1 00Mm) Set • 18, 24, 35, 50, 75, And 100Mm Lenses • All Lenses Cover Full-Frame Format • T1.5 To T16 Aperture Range • 12-Blade Rounded Iris • Native Lens Data Communication • Zeiss Extended Data • Lens Scale Marked In Feet • Includes Transport Case , 10 &14Mm Laowa Lenses Pl Mount (12Mm Pl Mount Lens) • Full Frame & Vv | T2.6 To T22 Aperture • Zero-D Design, Low-Distortion Optics • 117.8° Fov, 15-Blade Aperture • 16 Elements In 10 Groups • 7.9 Minimum Focusing Distance • 77Mm Filter Thread, 80Mm Front Diameter , Zoom Lens 70-200Mm Zeiss 70-200Mm Cz.2 Lens , Tripod Occnnor 1040 • Tripod: Flowtech 100 Carbon Fiber • Payload Capacity: Up To 45 Lb (20.4 Kg) • Counterbalance: Sinusoidal, Continuously Adjustable • Pan/Tilt Drag: Independent, 9+0 Positions • Tilt Range: +90° To -90° • Tripod Max Height: 60 (152.4 Cm) • Leg Sections: 3, Quick-Release Locks • Floor Spreader: Included • Handle: Pan Handle Included, Attachable Both Sides • Weight: Approx. 12.5 Kg (27.5 Lb) , Camera Cage Tilta Camera Cage For Sony Burano Advanced Kit • Modular Cage For Sony Burano • 15Mm Lws Baseplate, Side Plates • Top Plate, Top Handle, Monitor Mount • Hdmi Cable Clamp, Wi-Fi Tx Bracket • Multiple 1/4-20 & 3/8-16 Threads • Qd Sockets, Shoe Mount, Nato Rails • Side Rosette, 15Mm Rod For Monitor Mount • Aluminum & Stainless Steel Construction , Evf Bracket Rotatable Evf Bracket For Sony Burano Or Equivalent , Tool Kit Tilta Multi Functional Mini Tool Kit • Multi-Functional Mini Tool Kit • Includes 2.5Mm, 3Mm, 4Mm, 3/16 Allen Keys • Flathead & Phillips #2 Screwdrivers, T10 Torx Driver • Aluminum Alloy Frame With Stainless Steel Tools • 3/8-16 And 1/4-20 Threaded Mounts • Compact And Lightweight Design • Integrated Strap Loop For Easy Carry • Color: Titanium Gray • Compatible With Tilta Camera Cages & Support Systems • Portable For Assembly, Disassembly, And On-Set Use , Matte Box Tilta 4X5.6 Carbon Fiber Matte Box Or Equivalent , Adaptor 1 Metabones Pl To E Mount Adaptor , Dry Cabinet Andbon 300 Ltr Dry Cabinet , Light Meter 1 (Common) Sekonic Spectro Master C- 800 Light Meter • Measurement Range: 0.09-18,600 Fc (1-200,000 Lux) • Color Temperature Range: 1600-40,000K • Sensor: High-Resolution Cmos Sensor With 1Nm Increment • Ssi Support: Spectral Similarity Index For Light Matching • Display: 4.3 Color Touchscreen With 11 Display Modes • Cri/Tlci/Tm-30-15: Full Color Rendering Metrics • Flash Measurement: Selectable Shutter Speeds From 1-1/500 Sec • Power: Usb Rechargeable • Connectivity: Usb 2.0 Interface • Dimensions: 73 X 183 X 27 Mm • Weight: 230 G • Included: Carrying Case And Usb Cable , Light Meter 2 (Common) Sekonic Speed Master L858D-U Light Meter • Measuring System: Incident And Reflected Light Metering • Sensor: Spd Sensor • Measuring Range: -5 To 22.9 Ev (Iso 100) • Illuminance Range: 0.1 To 2,000,000 Lux • Iso Range: Iso 3 To Iso 13,107,200 • Shutter Speed Range: 30 Min To 1/80,000 Sec • Display: 2.7 Color Touchscreen Lcd • Flash Measurement: Flash Duration (1/40 To 1/55,500 Sec) • High-Speed Sync (Hss): Supported • Flash Analyzing Function: Yes • Spot Metering: 1° Spot Meter With Viewfinder • Rotating Lumisphere: 270° Rotation, Retractable • Radio Control Modules: Optional For Pocketwizard, Elinchrom/Phottix • Weather Resistance: All-Weather Design • Power: Rechargeable Battery • Dimensions: Approximately 73 X 183 X 27 Mm • Weight: Approximately 230 G , Cine Video Monitor Tv Logic Monitor (Professional Grade) • 1920 X 1080 Resolution Ips Lcd Screen • Composite, 3G-Sdi A/B, Hdmi & Dvi Inputs • Hlg, Pq & Pq2 Hdr Emulation Support • 1 X Composite & 1 X 3G-Sdi Output • 500 Cd/M² Brightness, 178° Viewing Angle • 3.5Mm Audio Headphone Output • Gpi & Ethernet Control • Waveform, Vectorscope, Audio Meter • Focus Assist, H/V Delay, Key Lock, Zoom • Tvlogic Color Calibration Utility & More , Category E: Studio Kit (Common ) Computer Apple Mac Studio M3 Ultra 28 Core Cpu •Apple M3 Ultra 28-Core Cpu •96Gb Unified Ram | 2Tb Ssd •60-Core Gpu | 32-Core Neural Engine •Uhs-Ii Sdxc Card Reader •Wi-Fi 6E (802.11Ax) | Bluetooth 5.3 •6 X Thunderbolt 5 •2 X Usb-A 3.2 Gen 1 | 1 X Hdmi 2.1 •1 X 10 Gigabit Ethernet Port •Macos , Software Final Cut Pro , Software Adobe Psd Annual Subsrciption , Accessories Apple Monitor 27Inch 4K Retina Display , Accessories Apple Keyboard , Accessories Apple Magic Mouse , Accessories Required Cables , Light Controlling Tablet Apple Ipad Pro •13 Ultra Retina Xdr Oled Touchscreen •2752 X 2064 Screen Resolution (264 Ppi) •Apple M4 9-Core Cpu •10-Core Gpu | 16-Core Neural Engine •512Gb Storage | 8Gb Ram •5G Lte | Wi-Fi 6E | Bluetooth 5.3 •Front & Rear 12Mp Ultra Wide Cameras •40 Gb/S Thunderbolt Connectivity •Supports Apple Pencil Pro•Ipados , Display X Lg C3/G3 Oled 65 •Display Type: Qned (Quantum Dot Nanocell Withminiled) •Screen Size: 164 Cm (65 Inches)•Resolution: 3840 X 2160 Pixels (4K Ultra Hd) •Processor: Α7 Ai Processor 4K Gen8 •Color Technology: Dynamic Qned Color With 100%Dci-P3 Coverage •Local Dimming: Advanced Local Dimming Forenhanced Contrast •Hdr Support: Hdr10, Hlg, Dolby Vision •Audio Output: 20W Rms •Audio Technologies: Ai Sound Pro (9.1.2 Channel),Dolby Atmos •Operating System: Webos 2025 With Ai Features •Remote Control: Ai Magic Remote With Ms Copilotintegration •Connectivity: Wi-Fi, Bluetooth, Hdmi, Usb, Ethernet •Voice Assistant: Built-In Google Assistant, Alexasupport •Mounting: Vesa Compatible (300 X 300 Mm) •Dimensions (W X H X D): 1456 X 840 X 29.7 Mm •Weight: 22.5 Kg , Lg 9.1.5 Sound Bar S95Tr (Latest Model) Sound Bar: • Channels & Power: 9.1.5 Configuration With 810 W Total Output And 17 Built-In Speakers •Immersive Audio: Supports Dolby Atmos, Dts:X, Andtriple- Level Spatial Sound For A Cinematic Surroundexperience •Smart Integration: Ai Room Calibration Pro, Woworchestra & Wowcast Enable Seamless Integrationwith Lg Tvs And Wireless Pairing •Connectivity: Includes Hdmi Earc, Hdmi 2.1 Input,Optical, Bluetooth 5.1, Wi-Fi, Usb, Plus Support Forchromecast, Airplay 2, Alexa, And Google Assistant •Setup: Simple Installation Via Power And Single Hdmiconnection With Wireless Rears And Sub; Ideal Formedium-Sized Rooms •Design: Sleek And Low-Profile, Approximately 49.2 ×2.5 × 5.3 Inches (Soundbar); Space-Efficient Setup. , Projector 4K Projector With Screen •Display Technology: 0.65 Dlp •Resolution: 3840 X 2160 Pixels (4K Uhd) •Brightness: 2200 Ansi Lumens •Contrast Ratio: 600,000:1 •Color Gamut: 84% Dci-P3 •Throw Ratio: 0.69-0.83:1 •Zoom: 1.2X Manual Zoom•Focus: Manual •Input Lag: 4.16 Ms (1080P @240Hz) •Hdr Support: Hdr10, Hlg •Audio Output: 5W X 2 Speakers •Audio Features: Earc, Dolby Atmos Passthrough •Operating System: Android Tv (Via Qs02 Dongle) •Streaming Support: Netflix, Youtube, Prime Video,Disney+, Hbo Max, Apple Tv+, Spotify •Connectivity: 2X Hdmi 2.0B, Usb Type-A, Rs232,Audio Out (3.5Mm Mini Jack) •Wireless Features: Wi-Fi 6, Bluetooth 5.0, Googlecast, Apple Airplay •Dimensions: 11 Cm X 30 Cm X 25 Cm •Weight: 3.1 Kg •Power Consumption: 275W (Max), 0.5W (Standby) , Movable Storage 10Tb Desktop External Hdd - Usb 3.0 For Windows And Mac , Ups 1500Va Ups , Computer Speaker 2.1 2.1 Audio Computer Output , Mega Phone Ahuja Bta 550 Wireless Bluetooth Portable 30 Watt Pa • Power Output: 30W Rms • Speaker Configuration: Single 8 Full-Range Dual-Cone Speaker With Tweeter • Microphone Inputs: Two Wired Mic Inputs (4Mv/4.7Kω), One Wireless Mic Input • Auxiliary Input: One Guitar (Aux) Input (100Mv/47Kω) • Tone Controls: Active Bass And Treble Adjustments • Digital Effects: Built-In Digital Echo • Playback Features: Mp3 Player With Bluetooth, Usb, Sd/Mmc Card Support, And Recording Capability • Remote Control: Included For Convenient Operation • Power Sources: Ac Mains, External 12V Dc, Or Built-In 11.1V 2200Mah Rechargeable Li-Ion Battery • Battery Life: Approximately 4 Hours On Battery Power • Construction: Plastic Moulded Cabinet With Trolley System For Portability • With Microphone , Safety Storage Solid Safety Storage To Store Camera With Lock Camera Safety Storage With Door And Lock (14X3X9) (Lxbxh) , Category F: Lighting Equipments , Portable Light Kit • Eight Lights With Charging Case • Output: 396 Lux At 3.3 Per Light • 2000-10,000K Cct; Rgb Color Control • 4.2 X 2.7 Panel; 2-Hour Runtime Battery • Cri 96 | Tlci 96 | Cqs 95 | Tm-30 Rf 94 • Onboard, Dmx/Rdm, Crmx & App Control • Tighter 45° Beam Angle • 0-100% Dimming, 15 Special Effects • 1/4-20 & Magnetic Mounting, Ip65-Rated • Includes Mounting Accessories & Cables , Cine Led Bulb Kit Aputure B7C Bulb Kit (8 Bulbs) • For Studio And Film/Tv Production Output: 328 Lux At 3.3 (120º, 6500K) • 2000 To 10,000K; Rgb Color Control • 23.8 X 1.8 Panel; Ac/Dc Operation • Cri 96 | Tlci 98 | Ssi 74 | Tm-30 94 • Dmx, Crmx, And Sidus Link App Control • Passive Cooling • 2 X 1/4-20 Threads, Infinibar Rail • Clamp To Baby Pin Adapter • Straight Connector Included , Panel Light 1 Aputure Nova P600 C Panel Light • For Studio & Film/Tv Production Output: 17,520 Lux At 3.3 (5600K) • 2000 To 10,000K; Rgb Color Control • 31.6 X 18.96 Panel, Ac/Dc Operation • Cri 95 | Tlci 95 | Ss1 84 | Cqs 95 • On-Board, Dmx512, Bluetooth App Control • Active Fan Cooling • With Control Box, Yoke, Mounting Clamp • Dimming: 0-100°, Plus/Minus Green Adj. • 300+ Gel Presets, 19 Special Effect , Barn Door Aputure Barndoor For P 600 Light P600Rb4 Barn Door For Aputure P600C Or Equivalent , Soft Box Aputure Softbox P 600R23 • For Studio & Film/Tv Production • Output: 98,500 Lux At 3.3 W/ Reflector • 5600K Cct • Ac Or Battery Power • Onboard, Wireless, Dmx & App Control • Art-Net & Lumenradio • Cri 96 | Tlci 96 | Cqs 94 | Ssi 72 • Active Cooling, Weather-Resistant Design • Bowens S Accessory Mount • Includes Remote, Reflector & Rolling Bag , Cine Led Light Godox M 600R Light For Studio & Film/Tv Production Output: 136,000 Lux At 3.3 W/ Reflector 1800-10,000K Cct; Full Rgb Color Control Onboard, Dmx, Crmx & App Control Art-Net & Sacn Ethernet Control Fan Cooled Bowens Mount Ip65 Rated Includes Control Box Includes Power Cable & Soft Case , Cine Light 1 Godox Tl120-K4 Light Four Lights & Remote Control For Wireless Control From Up To 164 Output: 685 Lux At 3.3 For Each Light 2700-6500K Cct; Rgb Mode Onboard, Wireless, Dmx & App Control Cri 96 | Tlci 98 39 Preset Special Effects Built-In Rechargeable Battery; Ac Power Retaining Clip With 1/4-20 For Mounting Includes Adapters, Clips & Hard Case For Wireless Control From Up To 164 Output: 685 Lux At 3.3 For Each Light 2700-6500K Cct; Rgb Mode Onboard, Wireless, Dmx & App Control Cri 96 | Tlci 98 39 Preset Special Effects Built-In Rechargeable Battery; Ac Power Retaining Clip With 1/4-20 For Mounting Includes Adapters, Clips & Hard Case , Cine Light 2 Godox Tl 60-K2 Light Two Lights & Remote Control For Wireless Control From Up To 164 Output: 421 Lux At 3.3 For Each Light 2700-6500K Cct; Rgb Mode Onboard, Wireless, Dmx & App Control Cri 96 | Tlci 98 39 Preset Special Effects Built-In Rechargeable Battery; Ac Power Retaining Clip With 1/4-20 For Mounting Includes Adapters, Clips & Bag Remote Control & Carry Case , High Power Light 1 Godox Mg 120 Arc-Biannual Rate Contract Color Light For Photo, Video, Film & Tv Production 78,800 Lux At 9.8 With Optional Fresnel 2800-6500K Color Temperature Multi-Voltage Ac Power Onboard, Dmx & Lumenradio Crmx Control Bluetooth & 2.4 Ghz Wireless Control 96 Cri, 96 Tlci Fan Cooled, 0-100% Dimming 11 Special Effects, 4 Dimming Curves Compatible With Godox G-Mount Modifiers , High Power Light 2 Godox Mg1200 R Light Compatible With Godox G-Mount Modifiers Green/Magenta Adjustments, 14 Effects Upgraded Optical Technology, Ip65 Rated 78,800 Lux At 9.8 With Optional Fresnel 2800-6500K Color Temperature Multi-Voltage Ac Power Onboard, Dmx & Lumenradio Crmx Control Bluetooth & 2.4 Ghz Wireless Control 96 Cri, 96 Tlci Fan Cooled, 0-100% Dimming 11 Special Effects, 4 Dimming Curves Compatible With Godox G-Mount Modifiers , Storm Light 1 Godox Mg4 K Arc-Biannual Rate Contract Color Light For Studio & Film/Tv Production Output: 640,000 Lux At 3.3 W/ Reflector 2800-10,000K Cct; Green/Magenta Shift Ac Power Onboard, Dmx, Crmx, Ethernet & App Improved Fan Cooling System Compatible With Godox G-Mount Modifiers Upgraded Optical Technology & Ip65 Rated 2.4 Diameter Light Source Emitter Includes Controller & Ac Power Cable , Storm Light 2 Godox Mg 6K Arc-Biannual Rate Contract Color Light For Studio & Film/Tv Production Output: 1,025,000 Lux At 3.3 (5600K) 2800-10,000K Cct; Bi-Color Mode Powered Via Ac Cable & Power Controller Onboard, Dmx, Rdm & Bluetooth Control Cri 97 | Tlci 97 Advanced Air Cooling System G-Mount-Compatible & Includes Yoke Ip65-Rated For Dust & Water Protection , Light Mat 1 Aputure Infinimat 4 X 4 Light Mat • Type: Modular Rgbww Led Light Mat • Size: 4 X 4 Ft • Color Temperature: 2000-10,000K • Color Accuracy: Cri 96, Tlci 97 • Light Engine: Rgbww • Control Box: 1600W, Ac-Powered • Mounting: Multiple Methods Supported • Included Accessories: Inflatable Softbox, Skirt, Control Grid, Head Cable (24.6), Safety Rope • Power Consumption: 800W (Maximum) • Connectivity: Bluetooth (100M Range) , Light Mat 2 Aputure Infinimat 2 X 4 • Type: Modular Rgbww Led Light Mat • Size: 2 X 4 Ft • Color Temperature: 2000-10,000K • Color Accuracy: Cri 96, Tlci 97 • Light Engine: Rgbww • Control Box: 400W, Gold Mount • Power Options: Ac Or Gold Mount Battery • Mounting: Multiple Methods Supported • Included Accessories: Inflatable Softbox, Skirt, Control Grid, Head Cable (24.6), Safety Rope • Power Consumption: 400W (Maximum) • Connectivity: Bluetooth (100M Range) , Light Bar 1 Aputure Infinibar Pb 12 4 Light Kit • Output: 617 Lux At 3.3 (120º, 7500K) • 2000 To 10,000K; Rgb Color Control • 23.8 X 1.8 Panel; Ac/Dc Operation • Cri 96 | Tlci 98 | Ssi 74 | Tm-30 94 • Dmx, Crmx, And Sidus Link App Control • Passive Cooling • 2 X 1/4-20 Threads, Infinibar Rail • 8 X 45º Light Control Grids • Flight Case And 330W Power Adapter , Light Bar 2 Aputure Infinibar Pb6 4 Light • For Studio And Film/Tv Production Output: 328 Lux At 3.3 (120º, 6500K) • 2000 To 10,000K; Rgb Color Control • 23.8 X 1.8 Panel; Ac/Dc Operation • Cri 96 | Tlci 98 | Ssi 74 | Tm-30 94 • Dmx, Crmx, And Sidus Link App Control • Passive Cooling • 2 X 1/4-20 Threads, Infinibar Rail • Clamp To Baby Pin Adapter • Straight Connector Included , Compact Light 1 Amaran F22C Light • For Studio & Film/Tv Production Output: 6420 Lux At 3.3 (5600K) 2500-7500K Cct; Hsi Color Control • 2 X 2 Mat; Ac/Dc Operation • Cri 95 | Tlci 98 | Cqs 96 • On-Board, Dmx, And Bluetooth Control • Passive Cooling For Silent Operation • 0-100% Dimming, 15 Lighting Effects • Multi-Voltage Ac, V-Mount Battery • Includes Softbox Frame, Diffusers & Grid , Compact Light 2 Godox La 300 R Light For Video Production & Vlogging Output: 94,700 Lux At 3.3 W/ Reflector 1800-10,000K Cct; Full Rgb Color Control Ac Or Optional Battery Power Onboard & App Control; Nfc Connection Cri 95 | Tlci 94 14 Lighting Effects Bowens S Accessory Mount, Black Housing Includes Reflector Includes Power Adapter , Compact Light 3 Godox La 150 R Light For Video Production & Vlogging 165W Fixture 1800-10,000K Cct; Full Rgb Color Control Ac Or Optional Battery Power Onboard & App Control; Nfc Connection Cri 95 | Tlci 94 14 Lighting Effects Bowens S Accessory Mount Includes Reflector Includes Power Adapter , Panel Light 2 Godox Ldx 100 R Light For Video Production And Vlogging Output: 4620 Lux At 3.3 (5600K) 2500-10,000K Cct; Rgb Color Control 18 X 16; Ac/Dc Operation Cri 96 | Tlci 96 Onboard, Wireless & App Control 0-100% Dimming, 14 Lighting Effects Optional Remote Control & Barndoors Includes Diffuser Includes Power Supply & Carry Case , Panel Light 3 Godox Ldx 50 R Light For Video Production And Vlogging Output: 2340 Lux At 3.3 (5600K) 2500-10,000K Cct; Rgb Color Control 14 X 12; Ac/Dc Operation Cri 96 | Tlci 96 Onboard, Wireless & App Control 0-100% Dimming, 14 Lighting Effects Optional Remote Control & Barndoors Includes Diffuser Includes Power Supply & Carry Case , Cine Light Kit Aputure Storm 80C- 3 Light Kit Or Equivalent For Video Production And Vlogging Output: 2340 Lux At 3.3 (5600K) 2500-10,000K Cct; Rgb Color Control 14 X 12; Ac/Dc Operation Cri 96 | Tlci 96 Onboard, Wireless & App Control 0-100% Dimming, 14 Lighting Effects Optional Remote Control & Barndoors Includes Diffuser Includes Power Supply & Carry Case , Professiona L Light 1 Godox P 1200 R Hard P8 / Arri Sky Panel-X 21 Or Equivalent • Type: Modular Rgbacl Led Panel • Color Temperature Range: 1,500-20,000K • Color Accuracy: Cri ≥99, Tlci ≥93 • Light Output: 16,602 Lux At 3.3 (1M) • Panel Size: 2X1 (29.1 X 13.3 Inches) • Pixel Zones: 8 Independent Zones • Control Options: Wired (Dmx-512), Wireless (Bluetooth Via Lico App, Lumenradio) • Cooling: Passive/Active With Ip66 Rating • Power Supply: Integrated Psu; Daisy-Chainable With Other Skypanel X Units • Mounting: Tool-Less Frame With Quick-Lock System • Compatibility: All S60-C Accessories Via Optional Adapter • Included Accessories: X21 Dome, Manual Yoke, Mains Cable , Hard Light Godox P 1200 R Hard / X21 Hard Light For Arri Sky Panel Or Equivalent P8 X21 Hard Light For Arri Sky Panel Or Equivalent , High Power Light Godox P 1200 R Hard P 8 For Studio & Film/Tv Production Output: 129,200 Lux At 3.3 (5600K) 1800-10,000K Cct; Rgb Color Control 29.2 X 15.2 Panel | Ac Power Cri 96 | Tlci 98 Onboard, Dmx/Rdm, Crmx & App Control Improved Fan Cooling System Flicker-Free Operation Ip65-Rated Weather Resistance Includes Yoke & Ac Power Cable , Dido Lights Godox Ms 600R 2K / Dido Lights Light , Category G: Light Accessories Spotlight Mount 1 Godox Vsa-26 K Spotlight Attachment Projectionlight Kit , Spotlight Mount 2 Godox Vsa-36K Kit Spotlight Attachment Kit , Iris 18 X Godox Vsa-Id Spotlight Mount 36 , Gobo Kit Godox Vsa-Gs1 Gobo Kit , Fresnel 1 Godox Fls 5 Fresnel , Fresnel 2 Godox Fls 10 Fresnel , Barn Door Godox Lb-02 , Light Dome 1 Godox Qr-P 90 T Light Dome , Light Dome 2 Godox S 65 T Light Dome Mini , Light Dome 3 Godox Qr-P 150 T Light Dome , Light Dome Godox Cs 85D Lantern 120 , Light Dome Godox Gp 5 Light Dome , Lantern Godox Cs 85 D Lantern , Reflector Kit Reflector Kit (For 1200X & 1000C) Or Equivalent , Cf12 Fresnel Godox Fls 10 Fresnel , Spotlight Max 1 Godox Gp 36 K Spotlight , Spotlight Max 2 Spotlight Max 50 (For 1200X,1000C,Xt 26) Or Equivalent , Iris Max 18 Godox Gp-Id Iris , Gobo Kit Godox Gobo Kit Godox Gp-Gs1,2,3,4,5 , F14 Fresnel Godox Gf 14 Fresnel , Beam Kit Storm Parallel Beam 70 Kit With Flight Case Or Equivalent , Cf16 Fresnel Cf16 Fresnel With Flight Case Or Equivalent , Stand 1 Dearkol Mfe 5800 (Expandable Up To 17Ft Height & 62Kg Payload) Or Equivalent , Stand 2 Dearkol Mfd 6000 (Expandable Up To 20Ft And 82Kg Payload) Or Equivalent , Soft Box Godox P 1200 Rh Do Softbox , Mounting Rig Godox P 1200 Rh Ad Mounting Rig , Lights Dimmer 5K Dimmer , Skimmer Cloth 10X10 Skimmer Cloth , 12 X12 Skimmer Cloth , 10X10 Black Cloth , 12 X12 Black Cloth , 10X10 Green Cloth , 12 X12 Green Cloth , Backgroung For Photography , Safety Storage For Lights Camera Safety Storage With Door And Lock (14X3X9) (Lxbxh) Stainless Steel 0.8Mm, Thickness (Jindal Ss) , Category H: Light Grip Equipments C Stand Godox 270Cs Stand , Par Stand 1 Par Stand Double Height , Par Stand 2 Par Stand Triple Height Or Equivalent , Black Flags 1 4X4 Black Flags Or Equivalent , Black Flags 2 2X1 Black Flags Or Equivalent , Empty Frames 4X4 Empty Frames Or Equivalent , Boom Rods Boom Rods (Various Sizes) Or Equivalent Boom Rods : Stand Height 6Ft To 10Ft, Extension Rod 5 Ft To 10Ft. , Arm Rods Arm Rods (Various Sizes) Or Equivalent , L Rods L Rods (Various Sizes) Or Equivalent , Sand Bag Sand Bag (Professional Grade) Or Equivalent , Skimmer Frame 1 6X6 Skimmer Frames Or Equivalent , Skimmer Frame 2 10X10 Skimmer Frames Or Equivalent , Skimmer Frame 3 12X12 Skimmer Frames Or Equivalent , Grid 1 Honey Comb Grid 6X6 Or Equivalent , Grid 1 Honey Comb Grid 10X10 Or Equivalent , Grid 1 Honey Comb Grid 12X12 Or Equivalent , Loop Boards Loop Boards (Various Sizes) Or Equivalent Solid Wooden Loop Boards (Various Sizes) 20Mtrs 6Pin Socket 2Nos With Led Indicator And A Tripper-15 Nos; 10Mtrs Board With 6Pin Socket 4 Nos With Switch, Led Indicator And A Tripper- 10 Nos; And 20Mtrs Board 6Pin Socket 6Nos With Switch, Led Indicator And A Tripper-5 Nos. , Track System Track & Trolley Full Kit 40Feet Length Manuall 150 Bowl Height 100Kg Capacity With Head , Slider Slider 10Ft Full Kit Or Equivalent , Low Base Stands Low Base Stands , Stand For 100 Bowl Head , Stand For 150 Bowl Head , Cutter Stand , Grip Heads Grip Heads (Professional Grade) , Reflector Board Reflectors 4X4 Board , Low Board , Apple Box Apple Box Setup (Complete Set) Apple Box Setup 20X12X8, 20X12X4, 20X12X2 ,20X12X1 (Complete Set) , Stool Setup Stool Setup 1 Feet , Stool Setup Stool Setup 2 Feet , King Pole- Wall To Wall Mount King Pole (6Ft To 12Ft) , Light Clamps Light Clamps (Various Sizes) , Hydraulic Stand Hydraulic/Windup Stand , Category I: Television Production , Video Camera Sony Hx Z 200 Camera , Mixer Yamaha Mg10X Mixing Console Audio Mixer - Xlr Input/Output, Phono Jack, Level Meter , Recorder Zoom H8 Recorder , Tripod Small Rig Ad80 Carbon Tripod Model No:4163 , Mic And Accessories Sennheiser Lapal Microphone With Cable , Mic And Accessories Rode Boom Pole , Mic And Accessories Rode Ntg4 Mic , Mic And Accessories Rode Blimp , Cables Monitoring Head Phone, Video/Audio Cables And Connectors , Mac Imac, Apple M4 Chip 10-Core Cpu With 4 Performance Cores And 6 Efficiency Cores 10-Core Gpu Hardware-Accelerated Ray Tracing 16- Core Neural Engine 120Gb/S Memory Bandwidth, 512Gb Ssd, 24Gb Unified Memory, 60.96 Cm (24″) 4.5K Retina Display 4480X2520 Resolution At 218 Pixels Per Inch With Support For 1 Billion Colours, Keyboard & Mouse , Cost For Installation, Commissioning And Integration Of All Component / Equipment And Comprehensive Onsite Warranty For 36 Months , Manpower Deployment , Cost For Deployment Of System Administrator For One (1) Year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Tamil Nadu View Result →
18.
Home Affairs #10778848 Price Bid
Purchasing Of CCTV Cameras & Other Equipments & their works & Servicing for Coastal Landing Points under SP Palghar- 1 5 MP bullet Fix 2 4 MP Outdoor PTZ 40X Zoom Cameras 3 4MP IP Dome camera for Cabin 4 Poles for Cameras Anti rusting and Equipment’s 5 Provisioning of Electrical Power Supply 6 8 Port POE Giga Switch 7 Routers VPN 8 Networking Cost (Passive Components, NVR, HDD and allied accessories) 9 Junction Box 10 Patch cords 11 Armour CAT 6 cable 12 Patch cords 13 Pipes HDPI 14 Midea Converters 15 Installation and Labor Cost 16 Installation works, Physical labour for Digging, refilling, RI, Erection of Pole, Camera, Rack, Accessories Mounting, etc. 17 Hydra and JCB etc 18 LED TV 65inch with Android OS 19 Monitoring Workstations Mini i5/8gb/512gb/HDMI Wireless Keyboard Mouse 20 Switches 8 port 21 Router with Allied accessories 22 Networking/IT Racks and Allied Accessories 23 Networking Cost (Passive Components) 24 Bandwidth for Outdoor Box Cameras, and dome Cameras on site Setup as per required MBPS (1st Year) 25 Bandwith Cost for PTZ Outdoor Camera MBPS (1st year) 26 SP Office – Data Centre Dedicated Lease Line 1:1 with 500MBPS with same downloading speed (1st Year) 27 Bandwith for Outdoor Box Cameras and dome cameras on site setup as per required MBPS (2nd Year) 28 Bandwith Cost for PTZ Outdoor Camera MBPS (2nd year) 29 SP Office – Data Centre Dedicated Lease Line 1:1 with 500MBPS with same downloading speed (2nd Year) 30 Bandwith for Outdoor Box Cameras and dome cameras on site setup as per required MBPS (3rd Year) 31 Bandwith cost PTZ outdoor cameras MBPS (3rd Year) 32 SP Office – Data Centre Dedicated Lease Line 1:1 with 500MBPS with same downloading speed (3rd Year) 33 Bandwith for Outdoor Box Cameras and dome cameras on site setup as per required MBPS (4th Year) 34 Bandwith cost for PTZ Outdoor camera MBPS (4th Year) 35 SP Office – Data Centre Dedicated Lease Line 1:1 with 500MBPS with same downloading speed (4th Year) 36 Bandwith for Outdoor Box Cameras and dome cameras on site setup as per required MBPS (5th Year) 37 Bandwith cost for PTZ Outdoor camera MBPS (5th Year) 38 SP Office – Data Centre Dedicated Lease Line 1:1 with 500MBPS with same downloading speed (5th Year) 39 Annual Maintains charges for Outdoor Bullet Cameras = 45qty, Outdoor PTZ Cameras = 15qty, IP camera for Cabin = 15qty, Poles = 15qty, VPN Routers, Switches, Cables, Connectors,Camera and Allied Accessories, 8 CH NVR with 10 TB sate, Switches Pose and allied accessories (1st Year) 40 Cloud Video Management System Software Yearly Licence (1st Year) 41 Annual Maintains charges for Outdoor Bullet Cameras = 45qty, Outdoor PTZ Cameras = 15qty, IP camera for Cabin = 15qty, Poles = 15qty, VPN Routers, Switches, Cables, Connectors,Camera and Allied Accessories, 8 CH NVR with 10 TB sate, Switches Pose and allied accessories (2nd Year) 42 Cloud Video Management System Software Yearly Licence (2nd Year) 43 Annual Maintains charges for Outdoor Bullet Cameras = 45qty, Outdoor PTZ Cameras = 15qty, IP camera for Cabin = 15qty, Poles = 15qty, VPN Routers, Switches, Cables, Connectors,Camera and Allied Accessories, 8 CH NVR with 10 TB sate, Switches Pose and allied accessories (3rd Year) 44 Cloud Video Management System Software Yearly Licence (3rd Year) 45 Annual Maintains charges for Outdoor Bullet Cameras = 45qty, Outdoor PTZ Cameras = 15qty, IP camera for Cabin = 15qty, Poles = 15qty, VPN Routers, Switches, Cables, Connectors,Camera and Allied Accessories, 8 CH NVR with 10 TB sate, Switches Pose and allied accessories (4th Year) 46 Cloud Video Management System Software Yearly Licence (4th Year) 47 Annual Maintains charges for Outdoor Bullet Cameras = 45qty, Outdoor PTZ Cameras = 15qty, IP camera for Cabin = 15qty, Poles = 15qty, VPN Routers, Switches, Cables, Connectors,Camera and Allied Accessories, 8 CH NVR with 10 TB sate, Switches Pose and allied accessories (5th Year) 48 Cloud Video Management System Software Yearly Licence(5thYear)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 5
Maharashtra View Result →
19.
Defence #10626937 Price Bid
Amc Of It Assets And Networking Components Annual Maintenance Contract For It Assets And Networking Components At Ins Valsura , Servers : , Cisco Ucs Mini 5108 With 04 In No Blade Servers Including Onsite Support For V Sphere And V Centre , Emc Vnxe 3200 Including Onsite Support For V Sphere And V Centre , Hp Proliant Dl360 G5 , Hp Proliant Dl580 G5 , Hp Proliant Dl180 G5 , Assembled Storage Server , Wipro ( Tower Server ) , Hcl ( Tower Server ) , Ibm Blade Center-E 8677 With 08 In No Blade Servers , Switches : , Cisco Catalyst L3 Switch , Cisco /Ws-2950G-24 , Cisco/Ws-C4506 ( 2*6 ) , Cisco/Sg300-28 , D-Link/ Dgs-3100-24 , D-Link/ Dgs-3100-48 , D-Link/ Des-3200-28 , D-Link/ Dgs-3200-26 , D-Link/ Des-3526 , Digisol/ Gs-1528-24 , D-Link/ Dgs-1210-28 , D-Link/ Dgs-3100-28 , D-Link/ Des-3200-26 , 24 Port Giga Switch , Layer 2 Networking Switch , Layer 2 Networking Switch , Thin Clients : , Hcl/ Intel Atom D 2500 , Hp/ Thin Pro , 1300 Ethernet Viertual Desktop ( Siddhartha ) , Personal Computers : , Personal Computer ( Acer Veriton-N7440p060678 ) , Wipro Dual Core/ Core 2 Duo , Ibm Dual Core/ Core 2 Duo , Hcl Dual Core / Core 2 Duo , Lenovo Dual Core , Datamini Dual Core , Acer Dual Core , Hp Dual Core/ Core 2 Duo , Hcl I3 , Hp I3 , Hp I5 , Datamini I3 , Acer I3 , Lenovo Amd A8 , Hp Xeon , Acer I5 , Dell I5 , Laptop : , Accer Aspire 5570 , Dell Precision M4500 , Scanner : , Cannon Scanlide , Kodak 1120 Scanmate , Hp Scanjet , Epson Perfection V33 , Multi Functioning Printer : , Hp Laserjet Pro 400 , Hp Cm 1312 , Konica Minolta Bizhub 215 , Canon Image Runner 24221 , Xerox Work Centre , Hp 3050 , Ricoh Mp2001l , Ricoh Aficio Mp 2000L2 , Ricoh Moc3002 , Ricoh Mpc 2011 , Panasonic Rx Mb772cx , Canon Mf 4450 , Canon Mf 4750 , Canon Mf 4820D , Samsung Monchrome Laser Mf ( Scx- 4012S ) , Toshiba E-Studio-2000Ac , Laser Jet Printer : , Brother Hl 1110 , Canon L11121e , Canon Lbp3300 , Canon C2020h , Canon 10891E , Canon Lbp 2900B , Canon Mf 3010 , Hp P1107 , Hp 3055 , Hp 3015 , Hp P1007 , Hp 1018 , Hp 1505 , Hp 1020 , Hp P1606dn , Hp K7108 , Hp Cp4005dn , Hp Cp1025 , Hp 1010 , Hp 6L Pro , Hp P1108 , Hp Pro 200 , Hp 1215 , Hp M1136 , Hp P2055 , Hp 2015Dn , Hp Pro M202n , Hp P 2035 , Samsung Ml1610 , Samsung Ml1640 , Lexmark 510Dn , Canon Rus8247 , Lexmark M5321 Dn , Desk Jet Printer : , Hp 4500 , Epson K100 , Hp 2645 , Hp 2545 , Hp D1360 , Hp 1050 , Hp D1668 , Hp 1510 , Canon Ix 5000 , Hp 1220C , Epson L 130 , Dot Matrix Printer : , Wep Hq 1070Xdx , Tvs , Epson Lq1150 , Epson Gx1170 I I , Printonix P 7005 , Epson Lx300 I I , Fax Machine : , Hp Ink Advata Ge 2645 , Ups : , Delta 30 Kva , Supra 10 Kva , Arrow 10 Kva , Supra 5 Kva , Supra 1 Kva , Apc 1 Kva , Proview 1Kva , Alfa 2000 , Intex 1 Kva , Iball 600Va , Zebronics 600Va , Supra 600Va , Apc 600Va , Hcl 600Sle , Alfa 500Va , Tvs Smart 500Va , Sheron 500Va , Intex 600Va , Dli 650 , Emersion 500Va , Numeric 1Kva , Sukam 500Va , Suvik 1Kva , Double Power 500Va , Syspower 500Va , Ups Dts-4 , India 2010 , Ace 1Kva , Emerge 1Kva , Cyber Power Ups 1Kva , Vpu/Projector : , Benq , Hitachi Cprx82ep , Hitachi Cp X 2021 Wn , Hitachi Cp X 82 , Hitachi Cp Ex 250Ef , Hitachi Cp X 3021 Wn , Hitachi , Mitsubishi X D22u , Epson Eb X 14 , Canon , Sony , Epson , Sony Vpc Ch 375 , Epson Eb 1965 , Short Throw Projector , Networking Components : , Utp Cable ( Repair/ Replace ) , Ofc Cable ( Repair/ Replace ) , D Link Media Convertors 100Fx Sm , D Link Media Convertors 100Fx Mm , D Link Media Convertors Dfe855s , Gbic Fibre Module Sm , Gbic Fibre Module Mm , Sfp Fibre Module Sm , Sfp Fibre Module Mm , Smart Board
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Gujarat View Result →
20.
Communications and Information Technology  #10616555 Price Bid
Supply Of It Equipments And Other It Related Services- Utm / Firewall Subscription Renewal 1 Sophos 3 Yr Fgp Subscription Rnl Of Xg85 2 Sophos 3 Yr Fg Subscription Rnl Of Xg135 3 Sophos 3 Yr Fg Subscription Rnl Of Xg210 4 Sophos 3 Yr Fg Subscription Rnl Of Xg330 5 Sophos 3 Yr Fg Subscription Rnl Of Xg430 6 Sophos 3 Yr Fg Subscription Rnl Of Xg330 7 Sophos 3 Yr Enhanced Support Rnl Of Iview V2 Unl  8 Total Schedule A ( 1 To 7 ) B Schedule B : Commercial Tax Department, U.P., Lucknow 1 Whatsup Gold Premium Software Lcense With 3 Year Support 2 One Time Installation And Commissoning Cost Of Above License 3 Total Schedule B ( 1 To 2 ) C Schedule C :Amc At Rajkiya Engineering College, Kannauj Smart Class Room 1 Ptz Camera Hd1000 ( To Focus On Students ) Make: Peoplelink 2 Epodium ( Digital Podium ) Consisting Of - Core I7 Desktop For Mcu Software - 19 Lcd Touch Monitor - 500Gb Hdd, 4 Gb Ram - Wireless Handheld Mic - Wireless Coller Mic - Digital Amplifier Make: Peoplelink 3 Speakers Mask 4 Make - Peoplelink 4 Projector 3500 Limunes With Hdmi & Wi-Fi Connectivity Roof Mounting Kit Make & Model: Sony, Vpl Dx270 5 Motorized Projection Screen ( Size 10X8 ) , Matt White Fabrics, Good Finishing, Motor With Remote Control Make: Standard 6 3 Kva Ups Online ( Ups Battery Not Covered ) Make: Uniline Network Computer Centre 7 20 Kva Online Ups With 3 Phase In 1 Phase Out ( Ups Battery Not Covered ) Make & Model: Uniline, Maxiline 20 Kva Ups 8 2.0 Ton A.C. ( Split ) With Stabilser Make & Model: Carrier Superia 3 Star Split Ac 9 48 Port Gigabit Web Managed Switch - 48 10 / 100 / 1000 Ports, 2 Sfp Ports Make & Model: Cisco, Sg350x 10 24 Port Gigabit Web Managed Switch - 48 10 / 100 / 1000 Ports, 2 Sfp Ports Make & Model: Cisco, Sg350x Language Lab 11 Language Lab Software Study 1200 Up To 30 + 1 License ( English Content Included ) One Year Support & Maintenance ( Software License Is Perpetual ) Make: Sanako 12 Headset Slh-07 For Desktop Make: Sanako 13 20 Kva Online Ups With 3 Phase In 1 Phase Out ( Ups Battery Not Covered ) Make & Model: Uniline, Maxiline 20 Kva Ups 14 48 Port Gigabit Web Managed Switch - 48 10 / 100 / 1000 Ports, 4 Sfp Ports Make & Model: Cisco, 48 Port Gigabit Switch Computer Lab 15 Desktop Computer With Tft Monitor - Intel Core I7 7700 7Gen Higher -8Gb ( 1X8gb ) Ddr42400 Necc Unbuffered Memory - 1 Tb 7200 Rpm Sata -Graphics Nvidia Geforce Gt730 1Gb Graphics Card. - Integrated 10 / 100 / 1000 Gigabit Ethernet Lan Vga, 1 Rj-45 Gigabit Port - Usb Keyboard & Optical Mouse - Windows 10 Home 64 Plus Sl Make & Model: Hp Desktop Prodesk 400 G4 Mt Pc 16 Computer Server With Configurations:- - Two Socket Rack ( 2U ) - Intel Xeon E5-2620V4 ( 2.1Ghz / 8-Core / 20Mb / 85W ) Processor Kit Or Higher - 1X16gb Memory - 2X600 Gb Sas Hdd; 2.5 Hot Swap - Dvd Writer, - Integrated Raid 0 / 1 In Built ( 24X7 Support ) Usb Keyboard And Usb Optical Mouse Make & Model: Hpe Ml350 Gen9 Computer Server 17 20 Kva Online Ups With 3 Phase In 1 Phase Out ( Ups Battery Not Covered ) Make : Uniline 18 2.0 Ton A.C. ( Split ) With Stabilser Make : Voltas, 243Zyi 19 48 Port Gigabit Web Managed Switch - 48 10 / 100 / 1000 Ports, 2 Sfp Ports Make: Hpe, 1920S-48G-4 Sfp Printer 20 Multifunctional Printer - Print, Scan, Copy - Print Speed Upto 18 Ppm - Resolution Upto 600X600 Dpi Effective Output. - 600 Mhz Processor. - Hi Speed Usb 2.0. - Ethernet Controller 10 / 100 Base Tx Network Port. - 128 Mb Memory Or Equivalent Specification Make & Model: Hp Laserjet Pro Mfp M126nw 21 Laser Printer - Print - Print Speed Upto 22 Ppm. - Resolution Upto 600X600 Dpi. - 600 Mhz Processor. - 1 Hi-Speed Usb 2.0. - 128 Mb Memory Or Equivalent. Make & Model: Hp Laserjet Pro M104a 22 Photocopier Machine - Print - Print Speed Upto 25 Ppm. - Resolution Upto 600 Dpi. - 1 Hi-Speed Usb 2.0. - Standard 16 / 128 / 128 Mb Or Equivalent. Make & Model: Ricoh Mp 2501L 23 Support And Maintenance Of All Passive Supplied, Other Associated Components 24 Posting Of Resident Engineer 25 Total Schedule C ( 1 To 24 ) : D Schedule D : Amc At Rajkiya Engineering College, Mainpuri Wi Fi Networking 1 Controller Base Access Point 802.11Ac Make & Model: Cisco, Air-Ap1832i 2 Wireless Lan Controller To Manage 100 Access Point And Upgradable Up To 150 Access Point License ( Suitable For Above Access Point ) Make & Model: Cisco, Air-Ct3504-K9 3 Layer3 Core Switch Having 8 Nos. 10G Ports, 24 Nos. 10 / 100 / 1000 Base T Ports And Dual Power Supply Make & Model: Cisco, C9300-24P 4 Layer2 Poe Switch Having 24 Nos. Of Gigabit Base T Ports, 2 Nos. Of 10G Base Sfp+ Ports Make & Model : Cisco Ws-C2960x-24Pd-L 5 Layer2 Poe Switch Having 8 Nos. Of Gigabit Base T Ports, 2 Nos. Of 1000 Base X Sfp Ports Make & Model: Cisco , Ws-C2960l-8Ps 6 10G Base Lr Transreceiver ( Suitable For Above Switches ) Make: Cisco 7 1000 Base-X Lx / Lh Transreceiver ( Suitable For Above Switches ) Make: Cisco 8 10Gbase-Cu Sfp+ Cable 1 Meter Make: Cisco 9 1 Kva Line Interactive Ups ( Ups Battery Not Covered ) Make & Model:- Uniline / Keptron / Equivalent Smart Class Room 10 Ptz Camera Hd1000 ( To Focus On Students ) Make: Peoplelink 11 Epodium ( Digital Podium ) Consisting Of - Core I7 Desktop For Mcu Software - 19 Lcd Touch Monitor - 500Gb Hdd, 4 Gb Ram - Wireless Handheld Mic - Wireless Coller Mic - Digital Amplifier Make: Peoplelink 12 Speakers Apart Make - Peoplelink 13 Projector 3500 Limunes With Hdmi & Wi-Fi Connectivity Roof Mounting Kit Make & Model: Sony, Vpl Dx270 14 Motorized Projection Screen ( Size 10X8 ) , Matt White Fabrics, Good Finishing, Motor With Remote Control Make: Standard 15 3 Kva Ups Online ( Ups Battery Not Covered ) Make: Delta Electric Work 16 20 Kva Online Ups With 3 Phase In 1 Phase Out ( Ups Battery Not Covered ) Make & Model: Delta 20 Kva Ups 17 10 Kva Online Ups With 3 Phase In 1 Phase Out ( Ups Battery Not Covered ) Make & Model: Delta 10 Kva Ups 18 2.0 Ton A.C. ( Split ) With Stabilser Make : Carrier 19 48 Port Gigabit Web Managed Switch - 48 10 / 100 / 1000 Ports, 2 Sfp Ports Make & Model : Cisco And Model: Sg350x 20 24 Port Gigabit Web Managed Switch - 24 10 / 100 / 1000 Ports, 2 Sfp Ports Make & Model : Cisco And Model: Sg350x Language Lab 21 Language Lab Software Study 1200 Up To 30 + 1 License ( English Content Included ) One Year Support & Maintenance ( Software License Is Perpetual ) Make: Sanako 22 Headset Slh-07 For Desktop Make: Sanako 23 20 Kva Online Ups With 3 Phase In 1 Phase Out ( Ups Battery Not Covered ) Make & Model: Uniline, Maxiline 20 Kva Ups 24 48 Port Gigabit Web Managed Switch - 48 10 / 100 / 1000 Ports, 4 Sfp Ports Make & Model: Cisco, Sg350x 25 Support And Maintenance Of All Passive Supplied, Other Associated Components 26 Posting Of Resident Engineer 27 Total Schedule D ( 1 To 27 ) : E Schedule E : Shiksha Nideshak, U.P., Lucknow 1 Sql Server 2019 Standard Edition ( Sqlsvrstdcore 2019 Olp 2Lic Nl Gov Corelic Qlfd )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
21.
Defence #10601844 Price Bid
Procurement Of It Equipments And Network Components For Cwn Mh:-1 Os Windows Server 2 Laser Jet Printer 3 Colour Printer With External Ink Tank 4 Firewall Make Cyberoam 5 Interactive Ups 600Va 6 Laser N / W Printer 7 8 Port Switch 8 Patch Cord 1 Mtr 9 Nas 4 Tb 10 L2 Managed Switch 16 Port 11 16 Port Patch Panel 12 9 U Rack With All Accessories 13 Client Thin With Monitor Keyboard And Mouse 14 Cat 6 I / O Box 15 Mcb 10 Amp 16 Single Door Mcb Box 6 Way 17 Dp 32 Amp 18 5A Socket 19 5A Switch 20 Wire 1.5 Mm Black 21 Wire 1.5 Mm Red 22 Wire 6 Mm 23 Tape Roll 24 Electric Wiring , Laying, Installation And Networking Charges 25 Power Distribution Board With 4 Socket 26 Pvc Pipe 1.5 27 Junction Box 1 28 Pvc Batten X 1.0 29 Pvc Batten X 1.5 30 Pvc Band 1 31 Pvc Flexible Pipe 1 32 Gang Box 2 + 2 33 Wire 0.75Mm Earthing 34 Pvc Flexible Pipe 1
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Rajasthan View Result →
22.
Public Administrative Department #10571411 Price Bid
Estimate For The annual maintenance contract Of Desktop Computers, Ups, Networking And Other Components Of Mc Office, Hoshiarpur ( Reso No. 19 Dated 19.07.2021 )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Punjab View Result →
23.
Agriculture #10537494 Price Bid
Comprehensive Annual Maintenance Of Laptop , Desktop Computer Peripherals , Network System Of Alhw For The Period Of 01 Year. , Attending Repair And Maintenance Of Office Computers , Laptops , Ups , Printers , Scanners , Plotter , All Networking Systems Etc . . . Installed In The Ce&A Office . Alhw , Port Blair . ( As Per The Annexure - A ) . During Working Hours For Any Unscheduled Call For Corrective Or Preventive Maintenance Services , Taking Appropriate Measures / Steps In Time To Set Right The Malfunctioning Of The Computer Systems And Networking Systems Including Replacement Of Worm Out Components Etc , Excluding Cost Of Spares Which Willl Be Issued By This Department On Free Of Cost As And When Required Based On The Service Call Report Submitted By The Rsidential Service Engineer Day To Day Basis . But For Providing Residential Service Engineer During All Working Days Including Cost Of All Taxes , Minor Tools And Plants , Transportation Charges Etc Complete . , Attending Repair And Maintenance Of Office Computers , Laptops , Ups , Printers , Scanners , Plotter , All Networking Systems Etc . . . Installed In The Dce - Andaman , Project Cell , And All Subdivision Offices Under This Circle ( As Per The Annexure - B ) . During Working Hours For Any Unscheduled Call For Corrective Or Preventive Maintenance Services , Taking Appropriate Measures / Steps In Time To Set Right The Malfunctioning Of The Computer Systems . Including Replacement Of Worm Out Components Etc . Excluding Cost Of Spares Which Will Be Issued By This Department On Free Of Cost As And When Required Based On The Service Call Report Submitted By The Residential Service Engineer Day To Day Basis . But For Providing Residential Service Engineer During All Working Days Inclusive Of All Taxes , Minor Tools And Plants , Transportation Charges Etc Complete . , Scanners , Plotter , All Networking Systems Etc . . . Installed In The Dce - Mechanical , And All Subdivision Offices Under This Circle ( As Per The Annexure - C ) . During Working Hours For Any Unscheduled Call For Corrective Or Preventive Maintenance Services , Taking Appropriate Measures / Steps In Time To Set Right The Malfunctioning Of The Computer Systems . Including Replacement Of Worm Out Components Etc . Excluding Cost Of Spares Which Will Be Issued By This Department On Free Of Cost As And When Required Based On The Service Call Report Submitted By The Residential Service Engineer Day To Day Basis . But For Providing Residential Service Engineer During All Working Days Inclusive Of All Taxes , Minor Tools And Plants , Transportation Charges Etc Complete .
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Andaman And Nicobar Islands View Result →
24.
Educational and Research Institute #10524394 Price Bid
Supply And Installation Of Equipments , Tools , Instruments , Machineries Etc For Itahar Govt Polytechnic-2 Digital Logic Trainer Board ( In Build Bread Boards Provision ) 3 Ic 4 7 Segment Led Display 5 Resistance 6 Led 7 Jumper Wire 8 Jumper Wire Cutter 9 Twizzer 10 Magnifying Glass 11 Function Generator 12 Diode Trainer Kit 13 Transistor Trainer Kit 14 Operational Amplifier Trainer Kit 15 Electronic Trainer Board ( In Build Bread Boards Provision ) 16 555 Timer In Astable, Monostable Operation 17 Discrete Components Resister 18 Digital Multimeter 19 Discrete Components Capacitors 20 Dual Channel Cro 30Mhz 21 8086 Trainer Kit 22 8086 Simulation Software 23 Unmanaged Switch 24 Hub 25 Cat 5E / 6 Cable 26 Rj 45 Connectors 27 Rj 45 Crimping Tools 28 Network Lan Cable Tester ( Rj 45 ) 29 Access Point ( Wifi Router / Wireless Router ) 30 Software 31 Software 32 Software 33 Software 34 Software 35 Software 36 Software 37 Software 38 Software 39 Software 40 Software 41 Software 42 Software 43 Software 44 Software 45 Software 46 50 Mhz Dual Channel Cro. 47 Function Generator 48 Digital Multimeter 49 50 Mhz Dual Trace Cro 50 Variable Dc Power Supply 51 Diode Trainer Kit 52 To Study The Rectifier With And Without Capacitor Filter For : — N ( A ) Half-Wave Rectifier, N ( B ) Full-Wave Rectifier, N ( C ) Bridge Rectifier N N 53 To Study The Output Waveform Of Push-Pull Amplifier For Class-A, Class-B & Class-Ab Operations 54 To Study The Fet Characteristics Trainer 55 To Determine Frequency Response Characteristics Of Rc Coupled Amplifier Circuit And Calculation Of Nbandwidth, Midband Gain, Input Impedance And Output Impedance For : N ( A ) Single-Stage Amplifier N ( B ) Double-Stage Amplifier N 56 Fet Characteristic Trainer Kit 57 Mosfet Characteristics Trainer Kit 58 Shunt And Series Regulator Trainer Kit For Following Plots: Line Regulation And Load Regulation 59 To Study The V-I Characteristics Of Ujt Trainer Kit. 60 To Study The Input And Output Characteristics And To Find The H-Parameters Of A Bjt For : — N ( A ) C-E Configuration, N ( B ) C-C Configuration, N ( C ) C-B Configuration N 61 Feedback Amplifier Trainer 62 Tuned Amplifier Trainer 63 Oscillator Trainer Kit 64 To Determine The Following Characteristics Of Op-Amp: —A ) Input Offset Voltage, B ) Slew Rate, C ) Non-Inverting Gain, D ) Inverting Gain E ) Adder, F ) Subtractor, G ) Differentiator, H ) Integrator And I ) Voltage Follower 65 To Study The Waveform Of Ujt As Relaxation Oscillator. 66 To Study The Characteristics Of Ic555 Timer Connected As:A ) Astable Multivibrator, B ) Monostable Multivibrator. 67 Multi O / P Programmable Linear Dc Power Supply 68 Digital Trainer Kit ( Experiment 1. -To Verify The Truth Table Of Not, Or, And, Nand, Nor, Xor, X-Nor With Ttl Logic Gates And Cmos Logic Gates. Experiment 2.- To Realize Different Boolean Expressions With Logic Gates. Experiment 3.-To Realize Half-Adder, Full-Adder, Subtractor, Parallel And Serial Full-Adder. Experiment 4-To Design 1’S Complement, 2’S Complement And 9’S Complement Adder-Subtractor. ) 69 Complete Setup To Design / Construct Programmable Up / Down Counter. 70 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer. 71 Complete Setup To Design Controlled Shift Register And Study Their Function. 72 Complete Setup To Design / Construct Parity Generator, Checker And Comparator 73 Complete Trainer Kit Of A To D Converters 74 Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter 75 D / A Converter Trainer 76 Digital I.C Tester 77 A / D & D / A Converter Trainer 78 To Verify The Mesh Analysis And Node Analysis Using Independent And Controlled Source 79 To Verify Thevenin’S And Norton’S Theorems 80 To Verify Maximum Power Transfer Theorem 81 To Verify Superposition Theorem 82 To Study The Series And Parallel Resonant Circuit 83 To Measure The Characteristic Impedance Of Symmetrical T And Ii Networks 84 To Test And To Measure The Cut –Off Frequencies Of The Following: — ( A ) Constant K-Type Low Pass Filter; ( B ) Constant K-Type High Pass Filter 85 To Test T And Pi Attenuator 86 To Study Standing Wave Pattern For A Transmission Line Of Finite Length With: ( A ) Open Termination, ( B ) Shorted Termination And Matched Termination. 2.To Measure The Attenuation Constant And Phase Shift Constant For Matched Termination 87 To Study The Given Rc Integrator And Differentiator At Different Time Constant 88 Study The Construction Features Of Dc Machine 89 To Control The Speed Of D.C. Shunt Motor Above Normal Speed & Draw The Speed Characteristics 90 To Control The Speed Of D.C. Shunt Motor Below Normal Speed & Draw The Speed Characteristics 91 To Determine Equivalent Circuit Parameters Of Single-Phase Transformer By Performing ( I ) O.C. Test ( Ii ) S.C. Test. 92 Study Of Three Point And Four Point Starter 93 Computer Programming Language Laboratory 94 8085 Microprocessor Traineer Kit 95 Microprocessor 8086 Trainer Kit 96 To Study The Amplitude Modulation And Demodulation Ttrainer Kit 97 Am / Fm Radio Receiver Kit 98 Analog Signal Sampling & Reconstruction Trainer Kit 99 Pulse Code Modulation And Demodulation System Trainer 100 Frequency Modulation And Demodulation Kit 101 Delta / Sigma Delta And Adaptive Delta Modulation Demodulation Kit 102 Dpcm & Adpcm Modulation / Demodulation Kit 103 Epbax Trainer Kit 104 Black & White Tv Trainer Kit With Provision Of Fault Finding 105 Dth Tv And Set Top Box Trainer Kit 106 Colour Tv Trainer With Provision Of Fault Finding 107 Tdm Pulse Code Modulation 108 Tdm Pulse Code Demodulation Trainer Kit 109 To Study The V-I Characteristic Of Gunn Diode. 110 Fdm Transmitter / Receiver Kit 111 Digital Storage Oscilloscope 112 Spectrum Analyzer 113 Antenna Trainer 86 - 860 Mhz 114 Microwave Test Bench ( Klystron Based ) 115 Ask / Psk / Fsk Modulation And Demodulation Kit 116 Microwave Test Bench ( Gunn Based ) 117 Antenna Trainer 86 - 860 Mhz ( With Pc Interfacing And Automatic Turntable And Necessary Plotting Software ) 118 Antenna Trainer 86 - 860 Mhz ( Manual Antenna Rotation Set Up ) 119 1 Ghz Spectrum Analyser 120 Antenna Trainer Kit 121 Microwave Power Meter 122 Trainer Kit To Study Reverse Recovery Characteristics Of Power Diodes 123 Power Transistor Drive Ckt Study Kit 124 To Study Drive Circuit Of Scr 125 To Study A Single Phase Rectifier—Output Waveform With Phase Control Circuit 126 To Plot V / I Characteristics Of Triac 127 To Study A Polyphase Rectifier 128 To Study Smps With Pwm Regulator Chip 129 To Plot V / I Characteristics Of Diac 130 To Study A Phase Control Ac Regulator 131 Servo Regulator Stabilizer Study Kit 132 To Study A Jones Chopper 133 To Study Speed Control Of Induction Motor By Voltage And Frequency Variation 134 To Study The Speed Control Of Dc Motor By: ( A ) Varying Field Current Keeping Armature Voltage Constant; And, N ( B ) Varying Armature Voltage Keeping Field Current Constant N 135 Power Electronics Devices Trainer Kit 136 Stepper Motor Study Set 137 Single Phase Bridge Inverter 138 Plc Trainer ( Experiment 1-Use Of Simulation Package For Different Function Of Plc. Experiment 2- Verify Function Of Logic Gates By Using Plc. Experiment 3- Write And Verify Ladder Program For Motor On-Off Control With Two Push Button ) 139 1 Kva Online Ups Trainer Kit 140 Stepper Motor Kit 141 2Mhz Function Generator 142 Power Electronics Development Trainer 143 1. To Study The Operation And To Use: ( A ) Multimeter, And, ( B ) Oscilloscope 2. To Study The Operation And To Use: N ( A ) Af Signal Generator; And, ( B ) Rf Signal Generator N3. To Study The Operation And To Use Frequency Counter N4. To Study The Operation And To Use Frequency Generator N 144 Digital Lcr Meter 145 Distortion Factor Meter 146 To Measure L & Q By Maxwell Method 147 To Measure The Unknown Capacitance By Schering Bridge 148 To Measure The Distortion In A Given Waveform 149 To Construct And Test A Q-Meter 150 To Study The Spectrum Analyzer 151 To Measure The Unknown Frequency By Wein Bridge 152 Microcontroller Trainer Kit 1.Write A Simple Assembly Programs For Na. Addition B. Subtraction B. Multiplication D. Division N2. Write A Programs For ( Any Two Of The Following ) Ni. 4 X 4 Matrix Keypad Interface Nii. Character Based Lcd Interface Niii. Analog To Digital Conversion ( On Chip Adc ) Niv. Serial Eeprom Nv. Seven Segment Led Display Interface Nvi. Interfacing With Temperature Sensor Nvii. Stepper Motor Interface N 153 Microcontroller Simulation Software 154 To Study The Function Of Fibre Optic Analog Link.To Study The Frequency Response Of Optical Receiver At Various Load Conditions. N3. To Study The Losses In Optical Fibre:— N ( A ) Propagation Loss, ( B ) Bending Loss. N4. To Study The Numerical Aperture Of Optical Fibre N 155 To Be Familiar With The Following Network Components 156 To Be Familiar With Mobile Telephone 157 To Be Familiar With Cordless Telephone 158 To Be Familiar With Fax 159 Network Components 160 24 Port Managed Switch 161 24 Port Unmanaged Switch 162 8 Port Hub 163 Access Points 164 Network Passive Component For Networking 165 Lan Trainer 166 Pc Based Optical Fiber Lan Trainer Package 167 Installation & Commissioning Of Network 168 To Measure Displacement With Lvdt 169 To Measure Temperature With Thermocouple 170 To Measure Temperature With Thermistor 171 To Measure Pressure With Strain Gauge 172 To Plot The Characteristics Of Rtd ( Pt-100 ) 173 Temperature Controller With On-Off Controller, Temperature Controller With Pi Controller, Temperature Controller With Pid Controller 174 Oscilloscope 175 Function Generator 176 Experimentation With Transistor Characteristics 177 Common Emitter Amplifier 178 Ujt Characteristics 179 Trainer Kit For Fet Characteristics 180 Trainer Kit For P-N Junction Diode & Zener Diode Characteristics 181 Trainer Kit For Superposition, Thevenins Theorem, Nortons & Max Power Transfer 182 Series Parallel Resonance Of R-L-C Ckt 183 Motor Winding Trainer 184 Automatic Coil Winding Machine 185 Three Point & 4 Point Starter 186 Digital Earth Resistance Tester 187 Digital Multimeter 188 Low Power Factor Analog Watt Meter 189 Power Factor Meter ( Single Phase ) 190 Power Factor Meter ( 3-Phase ) 191 Clamp On Ammeter 192 Calibration Of 3 Phase Energy Meter 193 Kelvin Double Bridge 194 Maxwells Bridge 195 Schearing Bridge 196 Single Phase & 3- Phase Digital Energy Meter With Single Phase & 3 Phase Resistive Load 197 3-Phase With Neutral Resistive Load Box 198 Clip On Type Ammeter 199 Heat Run Test Of A Single Phase Transformer 200 Heat Run Test Of A Single Phase Transformer 201 Determination Of Equivalent Circuit Parameters Of A Single Phase Transformer By O.C And S.C Test 202 3 Phase Transformer For Different Connections 203 D, C. Shunt Generator For Open Circuit Test 204 Load Test Of Dc Series Motor 205 Swinburns Test Of Dc Motor 206 Dc Shunt Motor For Speed Control & Load Test 207 D.C. Compound Motor ( Open Type ) 208 Variable Resistor Wire-Wound Type, Tubular 209 D.C. Power Supply, -I / P-440V, 3 Phase. O / P-220V, 50A 210 3-Phase Autotransformer Starter 211 Different Starters For Induction Motor 212 3 Phase Synchronous Motor With Starter 213 Starting & Reversing Of Single Phase Induction Motor 214 Induction Motor To Measure Slip By Stroboscopic Method 215 Slip Ring Induction Motor For T-S Curve 216 3 Phase Induction Motor ( Semi Open Type ) 217 Multipole Squirrel Cage Induction Motor 218 No-Load Test, Blocked Rotor Test & Load Test Of Induction Motor 219 Synchronization Of 3 Phase Alternators By Synchroscope & 3 Lamp Method 220 Determination Of Parameter & Regulation Of A Three Phase Alternator 221 Tachometer 222 D.C. Servometer Speed Control - Trainer Kit 223 L.V.D.T. To Measure Non Electrical Quantity 224 Proportional, Differential & Integral Controller 225 Strain Gauge & Measurement Of Strain 226 Study Of Proximity Switch 227 Study Kit Of Thermocouple And Temperature Measurement By Thermocouple 228 Demo Board For Different Insulator 229 Dielectric Strength Test Set For Transformer Oil 230 Digital Insulation Tester 231 Digital To Analogue Converter With Power Supply 232 Complete Setup To Design / Construct Binary Synchronous And Asynchronous Counter 233 Complete Setup To Design / Construct Parity Generator, Checker And Comparator 234 Complete Setup To Design / Construct Programmable Up / Down Counter 235 Complete Setup To Design Controlled Shift Register And Study Their Function 236 Complete Setup To Implement Encoder, Decoder , Multiplexer And De-Multiplexer 237 Complete Trainer Kit Of Ad Converters 238 Digital Trainer Kit 239 Master Slave J-K Flip-Flop Using Nand Gates With Power Supply 240 Study Of Universal Logic Gates & Napplications With Power Supply N 241 Experimentation With Fet Amplifier 242 Trainer Kit For Colpitt Oscillator 243 Trainer Kit For Wien Bridge Oscillator 244 Trainer Kit For Potentiometer Characteristics 245 D.C. Series Motor Speed Control Trainer ( Scr Driver ) Kit 246 Trainer Kit For Astable, Monostable & Bistable Multivibrator Using Ic-555 247 Trainer Kit For Scr Characteristics 248 Trainer Kit Of Dc Chopper Using Scr 249 Trainer Kit To Study Single Phase Full Bridge Full Controlled Converter ( Rectifier & Inverter ) Using Scr 250 Trainer Kit To Study Integrator & Differentiator Using Opamp-741 251 Trainer Kit To Study On The Applications Of Op-Amp 252 Speed Control Of Induction Motor 1Ph By Using Scr 253 Online Ups Demonstration Kit 254 D.C Network Analyzer 255 Thermal Over Current Relay 256 C.T. & P.T. Testing Trainer Kit 257 Current Differential Relay , Idmt Type 3 Phase Transformer With Fault Creation Arrangement 258 Induction Type E / F Relay 259 M.C.B. Demo Board 260 Transformer Differential Relay 261 To Test Directional Over Current Relay ( Docr ) By Relay Testing Kit 262 3-Phase Alternator Protection Simulator 263 8085 Microprocessor Trainer Kit 264 8085 Microprocessor Based Controller For The Operation Of A Stepper Motor With A Fixed No.Of Steps And To Determine The Angular Displacement Per Step By Measuring The Total Angular Rotation 265 Control Of Dc Motor At Different Speed And To Note Speed Vs Load Characteristics At Open Loop Conditions By 8085 Microprocessor Based Controller 266 Set Up For Checking Of The Phase Sequence Of Three Phase Supply System Using Three Zero Crossing Detectors Controlled By 8085 Microprocessor 267 Set Up For Measurement Of Ac Voltage, Current, Frequency And Phase Angle Difference Using Suitable Pt, Ct, Zcd, Adc, Etc Based On 8085 Microprocessor 268 Set Up For Over Voltage / Under Voltage Or Over Current / Under Current Relay Ckt Using Suitable Hardware Ckt Controlled By 8085 Microprocessor 269 8051 Microcontroller Trainer Kit Nmicroprocessor And Microcontroller N 270 Halogen Lamp 271 Cfl Lamp 272 Trainer For Sodium Vapour Lamp, Mercury Vapour Lamp 273 Lux- Meter 274 Lead Acid Battery With Charger 275 Protable Grinding Machine 276 Electric Power Drill 277 3-Phase Contactor Unit 278 Solder & De-Solder Including Soldering Iron Flux ( Kit ) 279 Dc Power Supply 280 Analog Dc Voltmeter 281 Analog Ac Voltmeter 282 Analog Ac Ammeter 283 Analog Dc Ammeter 284 Analog Wattmeter
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 15
West Bengal View Result →
25.
Educational and Research Institute #10488347 Price Bid
Development Of Iot Lab At Nsut East Campus Geeta Colony, Delhi 110031--- 1 Civil Work: 1 Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C / C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per AnufacturerS Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With :12.5 Mm Thick Tapered Edge Glass Reinforced Gypsum ( Grg ) Board Conforming To Is: 2095- ( Part 3 ) :1996 ( Boards With Bis Certification Marks ) 2 2 Providing & Fixing False Ceiling At All Heights With Grg ( Glass Fibre Reinforced Gypsum ) False Ceiling Tiles Of Size 595X595 Mm Of Approved Texture, Design And Patterns Having Moisture Content Less Than 2%, Humidity Resistance Of 99%, Nrc0.50 To 0.75 As Per Is 8225:1987, Non Combustible As Per Bs 476 ( Part 4 ) -1970 And Light Reflectance Of 85% ( Minimum ) To Be Laid In True Horizontal Level Suspended On Interlocking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick ( Galvanized @ 120 Grams Per Sqm Including Both Sides ) Comprising Of Main-T Runners Of Size 15X32 Mm Of Length 3000 Mm, Cross - T Of Size 15X32 Mm Of Length 1200 Mm And Secondaryintermediate Cross-T Of Size 15X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanisedmild Steel Items ( Galvanizing @ 80 Grams Per Sqm ) I.E. 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x2 Mm.Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Of Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 450 Mm Center To Center And 40 Mm Long Dry Wall Wood Screws. The Work Shall Be Carried Out As Perspecifications, Drawing And As Per Directions Of The Engineer-In-Charge.With Semi Perforated 12 Mm Thick Micro Tegular Edged Grg False Ceiling Tiles. 3 3 Distempering With 1St Quality Acrylic Distemper, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.One Coat 4 4 Providing And Placing Of Modular Workstations System Of Size 1500Mm ( W1 ) X 1500Mm ( W2 ) X 600Mm ( D ) X 750 Griha Compliant Having Following Specifications. - Main Partition Panel Having 4 Horizontal Blocks And Consists Of Vertical Extrusions 2Nos And Horizontal Extrusions 5 Nos Made Of 1.2Mm Thick Aluminium With Duly Powder Coated At Every Division Of Tile / Block. Each Panel Shall Have Bottom Frame Fabricated For 52.4Mm Panel Comprises Of 2 Nos. L-Channels Made Of 2Mm Thick Crca ( Cold Rolled, Cold Aneeled ) Steel ( Is: 513 ) , Formed Plates Of 3Mm Thick Hot Rolled Steel ( Is: 2062 ) & Erw Steel Tube Of Size 35X15x1.6Mm Thick In Oval Cross Section ( Is: 7138 ) Welded Together. The Complete Bottom Frame Shall Be Powder Coated With An Average Of 50-60 Microns Thickness Of Epoxy Powder Coating. The Bottom Frame Is Bolted With The Upright Verticals. Each Panel Is Provided With 2Nos Legs Of Height 120Mm Are Fixed At The Bottom Frame Of The Panel. Legs Construction-Adjustment Of The Height By 50Mm. It Will Be Coated With 45-50Micron ------------------------ Locking:10 Lever Cam Lock & Central Rh Locking With Actuator & Lock Channel Mechanism. Top Panel : 0.8Mm Thick Metal Straight Edge Top. Castors : Swiveling Non-Lockable 4Nos Castors Mounted Below The Body Shell. The Total Drawer Unit Is Finished With Epoxy Polyester Powder Coated To The Thickness Of 50 Microns ( + / -10 ) . The Product Should Be Complete And As Per Approved Sample And As Per The Direction Of Engineer-In-Charge. 5 Supplying And Placing In Position Faculty Table Of Following Specifications. Overall Dimension Of The Main Desk Shall Be - 1800Mmw X 750Mmd X 1050Mm Hthe System Shall Be A Desk-Based System With A Platform Understructure Made Up Of A Combination Of Ms. Tubes And Plates. The Product Should Be Greenpro Certified And Should Be Listed In Griha Product Catalogue In The Following Category Griha V.3 Criteria: 34; Griha V.2015 Criteria: 31 & Svagriha Criteria: 14. Understructure - The Slanted Legs Are Connected To The Understructure With The Help Of Pdc Connectors To Provide A Stable And Sturdy Base For The Worktops. Modesty Panel Shall Be Of Acrylic ( 8 Mm Thick Acrylic Both Side Frosted ) Or Of Metal 1.2 Mm Thick Crca. Worktop - Worktop Shall Be Made Of 25Mm Thick Pre-Laminated Board Conforming To Is: 12823. All The Edges Of Work Surface Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue.The Worktop Shall Be Complete With Provisions For Screen Mounting As Well As For Wire Management On The Workstation. Provisions For Fixing Of The Switches Shall Be On The Wire Tray / Channel. A Wire Management - It Shall Be A Part Of The Understructure And Can Be In The Form Of Enclosed Metal Tray Or 2 Level Enclosed Channel To Provide Concealed Wire Management Throughout The Cluster Formation. Wire Riser Leg Or Independent Wire Risers Shall Be Provided As Per The Layout Structure.Ccess Flaps With Soft Closing Technology Shall Be Provided On The Table Tops To Access The Switch Points On The Tray. Pedestal Having 3 Drawers Unit Having Flat Metal Front And Top With Central Locking. The Drawer Unit Consists Of 2Box And 1File Drawers. The Overall Size Of The Drawer Units Is 450Mm ( W ) X 435Mm ( D ) X 646Mm ( H ) . Construction & Material Of Drawer Unit :Welded Assembled Of 0.8Mm Thick Crca For Body Shell, Drawer Front & Tray, Front Side Stiffener, Rear Side Stiffener & Bottom, 1.2Mm Thick Crca Top Stiffene, Bottom Stiffener, Drawer Fronts & Metal Front Straight Edge. All Drawers With Double Extension Precision Ball Slide Shall Be Provided. For Drawer Pulling, Side Wise Tapered Recess Provided In Shell Behind Drawer Fronts. Locking:10 Lever Cam Lock & Central Rh Locking With Actuator & Lock Channel Mechanism. Top Panel : 0.8Mm Thick Metal Straight Edge Top. Castors : Swiveling Non-Lockable 4Nos Castors Mounted Below The Body Shell. The Total Drawer Unit Is Finished With Epoxy Polyester Powder Coated To The Thickness Of 50 Microns ( + / -10 ) . 6 6 Supplying And Placing Stool Of Following Specifications:The Seat Shall Be Made Up Of 1.2±0.1Cm Thick Flat Plywood With Moulded Polyurethane Foam And Are Upholstered With Replaceable Synthetic Leather Covers. The Dimensions Of Seat Shall Be Diameter 40.0 Cm And Adjustments Are 360° Revolving Type. The Back Foam Shall Be Designed With Contoured Lumbar Support For Extra Comfort. The Upholstery Shall Be Available In Synthetic Leather. The Dimensions Of Back Shall Be 45.0 Cm ( W ) Covered With Polyurethane Foam. The Hr Polyurethane Foam Shall Be Moulded With Density = 45 + / -2 Kg / M3and Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. The Manual Height Adjustment Shall Be Very Easy To Operate With A Help Of A Knob. It Should Be Easily Locked At The Most Comfortable Position. The Five-Prong Pedestal Shall Be Fabricated From 0.2 ± 0.02 Cm Thick Hr Sheet ( Is : Dd 1079 / Hr ) , Powder Coated ( Dft 40-60 Microns ) And Shall Be Fitted With An Injection Moulded Black Polypropylene Hub Cap And 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 55.0±0.5Cm Pitch-Circle-Diameter ( 65.0±-1.0Cm With Castors ) , Circular-Foot-Ringof Dia 52.0±0.2Cm Shall Be Made Up Of Dia 1.9±0.2 X0.12±0.0096Cm Thk Ms Erw Tube For Foot Support In High-Base Stool.The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Shall Bewidth- 65.0Cm, Depth- 65.0 Cm, Height- 88.0 To 99.5 Cm, Seat Height- 67.0 To 78.5 Cm. 7 7 Supplying And Placing Revolving Chair With The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric.* Full Back Size : 45.5 Cm. ( W ) X 53.0 Cm. ( H ) *Seat Size :48.5 Cm. ( W ) X 47.0 Cm. ( D ) The Hr Polyurethane Foam Used In Seat And Back Cushion Is Moulded In Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf As Per 15:7888 For 25% Compression.The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The 5 Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Am ) De Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion.The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Feature Which Is Inbuilt In Seat Base And The Tension ( Return Force ) Is User Weight Dependent. The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Poly-Amide. The Height Adjustment Feature Is Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Is Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide.The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cmthe Pedestal Is Injection Moulded In Glass-Filled Poly-Amide And Fitted With 5 Nos. In Wheel Castors. The Pedestal Is 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors. 5 Nos. Twin Wheel Castors Are Injection Moulded In Poly-Amide Having 5.0±0.1Cm Heel Diameter And Assembled To The Pedestal. The Product Shall Be From One Of The Approved Make Of Godrej, Hermanmiller, Steel Case, Delform Or Vitra Only. 8 8 Supplying And Placing Almirah Of Following Specifications : Almirah Steel Shall Have An Overall Size Of916mm ( W ) X486mm ( D ) X1980mm ( H ) With Welded Construction. It Should Have The Shelf Thickness Of 0.7 Mm, Back Thickness Of 0.8Mm, Door Thickness Of 0.8Mm ( High Yield Strength ) And All Other Components Shall Have A Thickness Of 0.9Mm. These Components Shall Be Made Of Crca ‘D’ Grade High Yield Strength As Per Is:513. The Almirah Steel Should Have A Mazak Handle And Three Way Locking Mechanism With Shooting Bolts. It Should Have A Height Wise Adjustable Shelf Mounting Which Shall Have A Uniformly Distributed Load Capacity Of Max 40 Kg. It Should Also Have A M10 Screw Type Leveller With Hex Plastic Base. The Finishing Shall Include Epoxy Powder Coated To The Thickness Of 50 Microns ( + / - 10 ) . Plenty Of Colour Options And Shelving Options Shall Be Available. 9 9 Supplying And Placing Locker Of Following Specificationsoverall Size Of 4 Door Locker Shall Be 380Mm ( W ) X450mm ( D ) X1830mm ( H ) .Stackability Shall Have Add- On Units That Can Be Stacked Width Wise To Form Bank Of Lockers Having Common Side Panel. Locking Shall Have 10 Lever Cam Lock With Lock Lever Plus Option Of Hasp Arrangement . Material Shall Be Crca 0.6 Mm Thickness . Construction Shall Be Rigid Knockdown Construction , Shelf Shall Be Uniformly Distributed Load Capacity Per Each Shelf Level Is 35 Kg Maximum . Finish Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns . Handle / Label Holder Shall Be Aesthetically Appealing Snap Fit Absplastic Handle . Ventilation Shall Be Attractive Punched Pattern For Ventilation . 10 10 Supplying And Placing Wall Storage Of Following Specifications Overall Dimensions Of Wall Storage 900 W Shall Be 900 Mmw X 328Mm D X 785 Mmh . The Construction Shall Be Aesthetically Appealing Completely Knock Down Construction Made From 0.6 Mm Thk. Crca As Per Is - 513 . Horizontal Stiffener Shall Be Made From 1.2 Mm Thk. Crca As Per Is - 513 . The Doors Shall Be Madefrom 18 Mm Thk. Interior Grade Pre-Laminated Board As Per Is - 12823 Or 18 Mm Thk . Plain Particle Board As Per Is -3087 With 0.6 Thk. With 0.6 Mmthk. Decorative Laminate And 0.6 Mm Thk. Backing Laminate As Per Is - 2046 On Either Side . All Edges Shall Be Duly Sealed With 2 Mm Thk. Pvc Edge Banding . Twodoor Withsingle Lockon Rhdoor . Locking Shall Be 10 Lever Cam Lock Lever At The Bottom Of The Door .Shelving Shall Be Heightwise Adjustable Shelf 1 No. Uniformly Distributed Load Capacity Of 25 Kg Udl .The Finish Shall Be Epoxy Powder Coated To The Thickness Of 50 Microns . The Doors Shall Be 448 Mm W X 18 Mm D X 783 Mm H Rh Side Door With Lock. 448 Mm W X 18 Mm D X 783 Mm H Lh Side Door W / Olock . The Doors Shall Be Madefrom 18 Mm Thk. Interior Grade Pre-Laminated Board As Per Is - 12823 Or 18 Mm Thk . Plain Particle Board As Per Is -3087 With 0.6 Thk. With 0.6 Mmthk. Decorative Laminate And 0.6 Mm Thk. Backing Laminate As Per Is - 2046 On Either Side . All Edges Shall Be Duly Sealed With 2 Mm Thk. Pvc Edge Banding .It Shall Have Two Door With Single Lock On Rh Door 11 11 Providing And Fixing Manual Chain Operated Roller Blinds Consisting Of 100% Polyester Fabric, Fabric Thickness 0.50 Mm Fabric Weight = 270 Gsm+- 5% , Fabric Width 230Cms, Tearing Strength 4.5 Kgf Warp, Bursting Strength 34 Kgf, Colour Fastness To Light 5 To 6 Grade In Position Of Standard Quantity And Approved Shade / Colour Including Necessary Accessories, Ms Clamps.Screws And Drilling Etc. As Required All Complete As Per Directions Of Engineer-In -Charge. ( Approved Make: Vista / Mac / Sd ) 12 Electrical Worksh-01 ( Wiring And Accessories ) 1 Wiringforlightpoint / Fanpoint / Exhaustfanpoint / Callbellpoint With1.5 Sq.Mmfrls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessedmediumclasspvcconduit, Withmodular Switch, Modularplate, Suitablegiboxandearthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.A Group C 13 2 Wiringforgroupcontrolled ( Looped ) Lightpoint / Fan Point / Exhaustfan Point / Call Bell Point ( Without Independent Switch Etc. ) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Pvc Conduit, And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required.A Group C 14 3 Supply And Fixing Suitable Sizegi Box With Modular Plateand Coverinfrontonsurfaceorinrecess Includingprovidingandfixing6pin, 15 / 16Amps Modular Socket Outlet And 15 / 16 Amps Modular Switch , Connection Etc . As Required . 15 4 Wiring For Light / Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessedmediumclasspvcconduitalong With1no.4Sq.Mmfrlspvcinsulatedcopper Conductor Single Core Cable For Loop Earthing As Required. 16 5 Wiring For Light / Power Plug With 4X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessedmediumclasspvcconduit Alongwith2nos.4Sq.Mmfrlspvcinsulated Copper Conductor Singlecorecablefor Loopearthing As Required. 17 6 Wiringforcircuit / Submainwiringalongwithearth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit Asrequired.A ) 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 18 B ) 2 X 10 Sq. Mm + 1 X 6 Sq. Mm Earth Wire 19 7 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable Inthe Existing Surface / Recessedsteelconduitasrequired A ) 3 X 2.5 Sq. Mm 20 B ) 3 X 4 Sqmm 21 C ) 6 X 4 Sq. Mm 22 8 Supplying And Fixing Modular Blanking Plate , On The Existing Modular Plate & Switch Box Excluding Modular Plate Etc. As Required. 23 9 Supplying And Fixing Following Modular Switch / Socketontheexistingmodularplate&Switchbox Including Connectionsbutexcludingmodularplate Etc. As Required.A 5 / 6 A Switch 24 B 3 Pin 5 / 6 A Socket Outlet 25 10 Supplying And Fixing Following Modular Base & Coverplateonexistingmodularmetalboxesetc.As Required.A 3 Module 26 B 6 Module 27 11 Supplying And Fixing Following Size / Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required.A 12 Module ( 200Mmx150mm ) 28 Sh-02 ( Distribution Board ) 12 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 Volts, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted.A ) 6 Way ( 4 + 18 ) , Double Door 29 13 Supplyingandfixing5ampsto32amps, Rating, 240 / 415Volts, CCurve, Miniaturecircuitbreaker Suitableforinductiveloadoffollowingpolesinthe Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.A ) Single Pole 30 14 Supplying And Fixing Folowingrating Double Pole 240 Volts, Mcbin The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.A ) 63 Amp Doublepole Mcb 31 15 Supplyingandfixingfollowingratingdoublepole 240Volts, Residual Current Circuit Breaker ( Rccb ) , Having Sensitivity Of 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.A ) 63 Amp Dp Rccb 32 16 Supplying And Fixing 63 Amps Rating, 240 / 415 Volts, 10 Ka, “C” Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.A Single Pole 33 17Supplying And Fixing Tpn Mcb 63 A Rating, 240 / 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required 34 Sh-03 Light / Fan Fixtures ) 18 Dismantling The Existing Worn Out / Defective Fittings From The Ceiling Andsitc Of Minimum 36 Watt Aluminium Slim Energy Efficient Led Panel Light Fitting Made Of Crca Sheet, Steel Housing Duly Powder Coatedhaving System Efficacy Minimum 100 Lumen / Watt Lm79, Color Temp 6500 Deg K, Symmetric Glare Free Full Opal Diffuser, Ip 20 Illumination In The False Ceiling, Recess Mounting Suitable For Fitting In The 600Mm X 600Mm Square Existing Space Having Complete With All Standard Accessories Including Drivers Etc. Complete As Required. 35 19 Sitc Of Minimum 20 Watt Aluminium Slim Energy Efficient Led Panel Light Fitting Made Of Crca Sheet, Steel Housing Duly Powder Coatedhaving System Efficacy Minimum 100 Lumen / Watt Lm79, Color Temp 6500 Deg K, Symmetric Glare Free Full Opal Diffuser, Ip 20 Illumination In The False Ceiling, Suspended Mounting Suitable For Fitting In The Existing Space Having Complete With All Standard Accessories Including Drivers Etc. Complete As Required. 36 20 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current ( Bldc ) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value ( Cmm / W ) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm ( Tolerance As Per Is : 374-2019 ) , Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C ( Max. ) , Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. 37 Sh-04 ( Earthing ) 21 Earthing With Copper Earth Plate 600Mm X 600Mm X 3Mm Thick Including Accessories And Providing Masonryenclosurewithcoverplatehavinglocking Arrangementandwateringpipeof2.7Mtrlongetc With Charcoal, Coke And Salt As Required. ( For Computer Earthing ) 38 22 Providing And Fixing 25 Mm X 5 Mm Copper Strip On Surface Or In Recess For Connections Etc. As Required. 39 23 Providing And Fixing 25 Mm X 5 Mm Copper Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With Brass Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required. 40 Sh - 05 ( Networking ) 24 Supplying And Drawing Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 1 Run Of Cable ( Make:- Commscope Systimax Only ) 41 25 Providing And Fixing 24 Port Loaded Straight Patch Panel Of Height 1U In The Existing Data End Rack Including Making Connections, Channel Labellingetc. Complete As Required. 42 26 Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.A Rj 45 Information Outlet 43 27 Supplying And Fixing Following Modular Base & Cover Plate On Existing Modular Metal Boxes Etc. As Required.A 1 Or 2 Module 44 28 Providing And Fixing Stranded Low Smoke Halogen Cordage Unshielded Cat 6 Modular Patch Cord Of Length 1 Mtr With Plug Insertion Life Not Less Than 750 Times And Minimum Plug Retention Force Of 133N I / C Making Connections Etc. Complete As Required. 45 29 Providing And Fixing Stranded Low Smoke Halogen Cordage Unshielded Cat 6 Modular Patch Cord Of Length 2 Mtr With Plug Insertion Life Not Less Than 750 Times And Minimum Plug Retention Force Of 133N I / C Making Connections Etc. Complete As Required. 46 30 Sitc Of12u Floor Mount Network Rack With Accessories ( Make:- Rittal / Apw / Emerson ) 47 31 Sitc Of 24 Port Non-Poe Managed Access Switchs Per Specifications In Annexure -A As Per Directions Of Engineer In-Charge 48 32 5 Years 24X7 Onsite Comprehensive Warranty And Support For24 Port Non-Poe Managedaccess Switch As Per Specifications Provided And Installed Under This Contract As Required. A ) For 1St Year 49 B ) For 2Nd Year 50 C ) For 3Rd Year 51 D ) For 4Th Year 52 E ) For 5Th Year 53 33 Suppling And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Inculding Cutting The Wall And Making Good The Same In Case Of Recessed Condit As Required.25Mm Pvc Conduit 54 34 Supplying And Fixing Of Upvc Trunking Of Size 100 X 50 Along With Accessories On Surface Complete As Required. 55 35 Dismantling & Buy Back Of Old & Defective Following Items As Per Required. A 4 X 1 Light Fitting. 56 B Ceiling Fans
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Delhi View Result →
26.
Educational and Research Institute #10444070 Price Bid
Purchase Of Various Furniture Items For Offices, Class Rooms, Hostels And Labs At Chaudhary Ranbir Singh University, Jind Purchase Of Various Furniture Items For Offices, Class Rooms, Hostels And Labs At Chaudhary Ranbir Singh University, Jind , Executive Table ( A Type ) Specifications: Supplying & Placing Modular Table In Completely Knock Down Conditions With An Overall Size 2600Mm X 2100Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of 36Mm Thick ( Top ) And 9Mm Thick ( Base Top ) Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Base Of The Top Shall Be Covered With The Assistance Of 9Mm Thick Extruded Aluminum Frame On The Edges. Flapper Box Shall Be Enclosed At Table Top. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Table Top Shall Be Supported On Particle Board Based Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 18Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Gable End Leg Shall Be Provided With 70Mm Width Made Up Of Extruded Aluminum Channel Having Aesthetically Appealing And Corrosion Resistance Property. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18 Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Side Unit For Storage Purpose With An Overall Size 1200Mm X 550Mm X 760Mm. The Side Unit Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Top And Side 36Mm Thick, Drawer Base 9Mm And Other Parts 18Mm Thick Like Shutter, Back, Facia, Panel Etc. It Shall Have 2 Drawer And 2 Shutter. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. A Fixed Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 675Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Drawer Base Shall Be 9Mm Thick And Other Parts Like Side, Back, Facia Shall Be 18Mm Thick. It Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Molding, Skirting Shall Be Provided At Bottom. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Executive Chair ( A Type ) Specifications: Supplying And Placing Ergonomically Designed, Comfortable & Aesthetically Appealing High Back Chair. The Seat Shall Be Made Of 12Mm Thick Hot Pressed Commercial Plywood Upholstered With High Resilience Polyurethane Foam ( 25+19 ) Mm Thick Having Density ( 40+40 ) Kg / M³ With Beage Leatherette Tapestry 0.8Mm Thick And 535 Gsm And The Back Shall Be Made Of Hot Pressed Plywood 12Mm Thick Upholstered With High Resilience Moulded Polyurethane Foam 40 Mm Thick Having Density 40 Kg / M³ With Beige Leatherette Tapestry 0.8 Mm Thick And 535 Gsm With Contoured Lumbar Support Which Helps To Provide Full Back Support And Maintain The Natural Curvature Of The Spine. Back Shall Be Movable Type With The Assistance Of Gas Lift Provided Under The Seat And Lever In The Arm. The Armrest Shall Be Used Cushion Arm With Leatherette Tapestry And Ss Shiny Chrome Finish Completely Joint With Seat And Back. The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Upto 65Mm With Gas-Lift To Suit Them Using The Lever Under The Seat.. The Pedestal Shall Be Made Up Of Ms Crca Chrome Plated Having Pitch Circle Dia 700 Mm Fitted With 5 Nos. 50Mm Twin Wheel Castors Which Shall Be Made Of Injection Moulded Black Nylon 30% Glass Filled Having Self-Lubricating Property For Friction Free Movement. The Seat Size Shall Be 480±10 Mm ( D ) X 520±10 Mm ( W ) And Back Size Shall Be 520±10 Mm ( W ) X 710±10 Mm ( Ht ) From Seat. Overall Height Shall Be = 1190±10 Mm, Overall Depth = 750±10 Mm & Overall Width = 750±10 Mm. , Executive Table - Type B Specifications: Supplying & Placing Executive Table With Credenza Unit And Pedestal Unit In Completely Knock Down Conditions With An Overall Size 1800 -1900 Mm X 750 Mm X 750 Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Have The Size 1800-1900 Mm X 800Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Enclosed With Wire Manager Cap For Electric Provision. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 300Mm. The Trey Shall Be Operated On Sliding Channel. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 900 Mm X 450Mm X 650Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 2 Box Drawer, 1 Filing Drawer And 1 Shutter. It Should Be Operated With The Assistance Of Ss Handle, Concealed Crank Hinge And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. It Shall Be Mounted On Injection Moulded Nylon Castor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 650Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. The Pedestal Shall Be Mounted Over Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380. , Executive Chair ( B Type ) Specifications: Providing And Supplying A High Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 40+40 ) Mm Thick Having Density ( 40 & 32 ) Kg / M³ In Seat And ( 30+30 ) Mm Thick Having Density ( 32, 32 ) Kg / M³ In Back. The Same Shall Be Upholstered With Fabric. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Leatherette Covering Top. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm Gas-Lift To Suit Them Using The Lever Under The Seat. The Pedestal Should Have Five Legged Ms Crca Powder Coated With 50-60? Dft Thick Having Pitch Circle Dia. 660 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm ( D ) X 520±10 Mm ( W ) And Back Size Shall Be 520±10 Mm ( W ) X 700±10 Mm ( H ) From Seat. Overall Height Shall Be = 1160±10 Mm, Overall Depth = 680±10 Mm & Overall Width = 660±10 Mm. , Executive Table - Type C Specifications: Supplying & Placing Executive Table With Credenza Unit And Pedestal Unit In Completely Knock Down Conditions With An Overall Size 1800-1900 Mm X 2000 Mm X 750 Mm That Is To Be Assembled At Site. The Construction Of The Main Table Shall Be Free Standing Structure Constructed With The Help Of Minifix Dowels And Pins. The Worktop Shall Have The Size 1800Mm X 800Mm Made Up Of 50Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Enclosed With Wire Manager Cap For Electric Provision. A Pullout Keyboard Trey Shall Be Provided Of 18Mm Thick Pre-Laminated Particle Board Having Size 550Mm X 300Mm. The Trey Shall Be Operated On Sliding Channel. The Table Top Shall Be Supported On Particle Board Base Gable End. The End Wall Of The Table On The Side Shall Be Topped By Gable End. It Should Be Made Up Of 25Mm Thick Pre-Laminated Particle Board And Profile Shall Be In Linear Shape With Appropriate Pvc Edge Banding. The Table Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Table. It Should Be 18Mm Thick Pre-Laminated Particle Board In Linear Shape With Appropriate Pvc Edge Banding Connected With Both End. There Shall Be Buffers Provided At The Base To Avoid Scratches On The Floor. The Table Shall Have Credenza Unit For Storage Purpose With An Overall Size 1200Mm X 450Mm X 650Mm. It Should Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Base 9Mm Thick And Other Parts 18Mm Thick Like Shutter, Back, Facia, Side Panel Etc. It Shall Have 2 Box Drawer, 1 Filing Drawer And 1 Shutter. It Should Be Operated With The Assistance Of Ss Handle, Concealed Crank Hinge And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Synchronized Locked With One Single Key. It Shall Be Mounted On Injection Moulded Nylon Castor. A Mobile Pedestal Shall Be Provided With An Overall Size 400Mm X 450Mm X 650Mm. The Pedestal Shall Be Made Up Of Pre-Laminated Particle Board Of Grade Ii Of Is 12823. Pedestal Side, Back, Top, Facia Shall Be 18Mm Thick And Drawer Base Shall Be 9Mm Thick. The Pedestal Shall Have 3 Nos. Of Drawer I.E. 2 Box Drawer And 1 Filing Drawer. The Drawer Shall Be Operated With Ss Handle And Easily Close & Open With The Assistance Of Roller Channel And Ball Bearing Channel To Enable Smooth Operation. The Drawer Shall Have Central Locking Mechanism In Which All The Drawer Shall Be Locked With One Single Key. The Pedestal Shall Be Mounted Over Injection Moulded Nylon Castor. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. The Board Used Should Meet International Standard Of Quality, Indian Standard Is 12823 Grade Ii Should Meet Long Time Load Bending, Screw-Withdrawal Strength, Modulus Of Rupture And Modulus Of Elasticity Bending Tested As Per Is 2380 , Executive Chair ( C Type ) Specifications: Providing And Supplying A Mid Back Chair With Ergonomic Design, Comfortable & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 40+40 ) Mm Thick Having Density ( 40 & 32 ) Kg / M³ In Seat And ( 30+30 ) Mm Thick Having Density ( 32, 32 ) Kg / M³ In Back. The Same Shall Be Upholstered With Fabric The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Lumbar Support Which Helps To Provide Full Back Support As Well As Head Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Leatherette Covering Top. For Seating Durability The Chair Shall Have Torsion Bar 360 Degree Revolving Mechanism With Upright Position Locking And Tilt Tension Adjustment. The Pneumatic Seat Height Adjustment For Healthy Seating, User Can Adjust Seat Height Up To 65Mm Gas-Lift To Suit Them Using The Lever Under The Seat. The Pedestal Should Have Five Legged Ms Crca Powder Coated With 50-60? Dft Thick Having Pitch Circle Dia. 660 Mm Fitted With 5 Nos. Twin Wheel Castors. The Castors Of The Chair Should Be Injection Moulded In Black 30% Glass Filled Nylon, Tested To Perform 98, 000 Cycles With 250Lbs Load. The Seat Size Shall Be 500±10 Mm ( D ) X 520±10 Mm ( W ) And Back Size Shall Be 520±10 Mm ( W ) X 700±10 Mm ( H ) From Seat. Overall Height Shall Be = 1160±10 Mm, Overall Depth = 680±10 Mm & Overall Width = 660±10 Mm. , Visitor Chair ( A ) Specifications Providing And Supplying A Visitor Chair With Ergonomic Design For User Comfort & Aesthetically Appealing. The Seat And Back Shall Be Made Of 18Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Polyurethane Foam ( 40+40 ) Mm Thick Having Density ( 40, 32 ) Kg / M³ In Seat And ( 30+30 ) Mm Thick Having Density ( 32, 32 ) Kg / M³ In Back. The Same Shall Be Upholstered With Leatherette Tapestry 1 Mm Thick And 571 Gsm. The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine For Back Support. The Chair Shall Be Supplied With Polypropylene Arm With Cushion Base Fabric Covering Top. The Frame Structure Shall Be Cantilever Support Type Made Of Crca Powder Coated 50-60? Thick Round Pipe Of Dia. 28.5Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 500±10 Mm ( D ) X 520±10 Mm ( W ) And Back Size Shall Be 520±10 Mm ( W ) X 625±10 Mm ( H ) From Seat. Overall Height Shall Be = 1040±10 Mm, Overall Depth = 680±10 Mm & Overall Width = 660±10 Mm. , Three Seater Sofa Specifications: Supplying And Placing Three Seater Sofa That Shall Be Constructed From Natural Hard Wood And Marine Grade As Per Is: 710 Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Structure Shall Be Upholstered With Fabric Dual Tone. The Understructure Shall Consist Of Ss 304 Grade Legs Having Cross-Section Area 40 Mm X 20 Mm X 1.6 Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 550±10 Mm ( D ) X 1650±10 Mm ( W ) , Seat Height = 450±10 Mm, Overall Width = 2320±10 Mm, Overall Depth = 900±10 Mm & Overall Height = 820±10 Mm. , Two Seater Sofa ( Reg ) Specifications: Supplying And Placing Two Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Structure Shall Be Upholstered With Fabric Dual Tone. The Understructure Shall Consist Of Ss 304 Grade Legs Having Cross-Section Area 40 Mm X 20 Mm X 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 550±10 Mm ( D ) X 550±10 Mm ( W ) , Seat Height = 450±10 Mm, Overall Width = 1120±10 Mm, Overall Depth = 900±10 Mm & Overall Height = 820±10 Mm. , One Seater Sofa ( Reg ) Specifications: Supplying And Placing Single Seater Sofa That Shall Be Constructed From Natural Hard Wood And Commercial Plywood Having Inner Frame. The Thickness Of The Wood Should Allow For The Heavy Tension Webbing. The Sofa Shall Have Spring Attached And Also Be Padded Separately. The Frame Shall Be Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³ In Seat And 32Kg / M³ In Back. There Shall Be Cushion Arm Provided Padded With High Resilience Polyurethane Foam Having Density 40Kg / M³. The Structure Shall Be Upholstered With Fabric Dual Tone. The Understructure Shall Consist Of Ss 304 Grade Legs Having Cross-Section Area 40 Mm X 20 Mm X 1.6Mm Thick. There Shall Be Shoe Provided At The Bottom To Avoid Scratches On The Floor. The Seat Size Shall Be 550±10 Mm ( D ) X 550±10 Mm ( W ) , Seat Height = 450±10 Mm, Overall Width = 1120±10 Mm, Overall Depth = 900±10 Mm & Overall Height = 820±10 Mm. , Centre Table ( A Type ) Specifications Supplying & Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Profile Shall Be In Rectangle Shape With Bevelled Edges. The Bottom Storage Shelf Shall Be Provided With An Overall Size 1155Mm X 280Mm Made Of 8Mm Thick Toughened Glass With Bevelled Edges. The Glass Shall Be Supported On Vacuum Caps Situated Over Ss 304 Grade Pipe Frame. The Under Structure Shall Have Ss Pipe Frame Having Size 67Mm X 13.5Mm. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. , Side Table ( A Type ) Specifications: Supplying & Placing Center Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Shall Be Made Up Of 12Mm Thick Toughened Glass. The Profile Shall Be In Square Shape With Bevelled Edges. The Bottom Storage Shelf Shall Be Provided With An Overall Size 555Mm X 280Mm Made Of 8Mm Thick Toughened Glass With Bevelled Edges. The Glass Shall Be Supported On Vacuum Caps Situated Over Ss 304 Grade Pipe Frame. The Under Structure Shall Have Ss Pipe Frame Having Size 67Mm X 13.5Mm. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. , Side Table ( B Type ) Specifications: Supplying & Placing Center Table With An Overall Size 600Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 18 Mm Ply And 1 Mm Thick Mica Laminated. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius And Should Have Matching Shade. The Profile Shall Be In Square Shape With Bevelled Edges. The Bottom Storage Shelf Shall Be Provided With An Overall Size 555Mm X 280Mm Made Of 8Mm Thick Toughened Glass With Bevelled Edges. The Glass Shall Be Supported On Vacuum Caps Situated Over Ss 304 Grade Pipe Frame. The Under Structure Shall Have Ss Pipe Frame Having Size 67Mm X 13.5Mm. There Shall Be Ppcp Shoe Provided To Avoid Scratches On The Floor. , Centre Table ( B Type ) Specifications: Supplying & Placing Center Table With An Overall Size 1200Mm X 600Mm X 450Mm. The Top Of The Table Shall Be Made Up Of 18 Mm Ply And 1 Mm Thick Mica Laminated. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius And Should Have Matching Shade. The Profile Shall Be In Rectangle Shape With Round Corner. The Top Shall Be Supported On Ss 304 Grade Frame With Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Under Structure Shall Consist Of Four Legs Made Of Ss 304 Garade Oval Pipe Having Cross-Section Area 52Mm X 26Mm With 1.6Mm Thick. There Shall Be Co-Polymer Polypropylene Shoe Provided At The Bottom To Avoid Scratches On The Floor. , Visitor Chair ( Type B ) Specifications: Providing And Supplying Visitor Chair With Ergonomic Design For User Comfort. The Seat And Back Shall Be Made Of 15Mm Thick Hot Pressed Commercial Plywood Padded With High Resilience Moulded Polyurethane Foam 50Mm Thick Having Density 45Kg / M³ In Seat And 45Mm Thick Having Density 35Kg / M³ In Back. The Same Shall Be Upholstered With Fabric Tapestry 1Mm Thick And 300 Gsm. The Back And Base Of Chair Shall Be Supplied With Polypropylene / Abs Moulded Cover And The Backrest Shall Be Made By Keeping The Natural Curvature Of The Spine. The Seat And Back Shall Be Arrested Together With 50-60? Thick Powder Coated Hr Steel Spine And The Armrest Shall Be Used Black Integral Polyurethane Arm With Metal Insert Completely Joint With Seat And Back. The Frame Structure Shall Be Cantilever Support Type Made Up Of Crca Powder Coated With 50-60? ( Dft ) Thick Round Pipe Of Dia. 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm ( W ) X 450±10 Mm ( D ) And Back Size Shall Be 480±10 Mm ( W ) X 400±10 Mm ( H ) From Seat & Overall Height = 820±10 Mm. , Study Table Specifications: Supplying And Placing Table In Knock Down Condition With An Overall Size 1200Mm X 600Mm X 750Mm That Is To Be Assembled At Site. The Worktop Shall Be Made Up Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Table Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Understructure Shall Be Supplied With Crca Round Pipe Having Dia. 25.4Mm With 1.6Mm Thick. 1 Nos. Footstep Shall Be Provided Between Both Side Leg With The Same Size I.E Dia. 25.4Mm With 1.6Mm Thick. Fixed Pedestal Metallic Unit Shall Be Supplied With 3 Nos. Of Drawer At One Side. All The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Recessed Handle. All The Size Shall Have The Tolerance Of Upper And Lower Deviation Of ±10Mm For Board & ±0.2Mm For Metal. , Study Chair Specifications Providing And Supplying Chair The Seat Shall Be Made Of 12Mm Thick Hot Pressed Plywood Upholstered With High Resilience Polyurethane Foam ( 50+19 ) Mm Thick Having Density 40Kg / M³ And The Back Shall Be Made Of Pipe Frame Upholstered With High Resilience Polyurethane Foam ( 19+19 ) Mm Thick Having Density 23Kg / M³. The Same Shall Be Upholstered With Fabric. The Armrest Shall Be Used Cushion Arm Mounted On Pipe Frame. The Frame Structure Shall Be Cantilever Support Type Made Up Of Ss 304 Grade Chrome Finish Round Pipe Of Dia 25.4Mm With 2Mm Thick. There Shall Be Ppcp Shoe Provided At The Base To Avoid Scratches On The Floor. The Seat Size Shall Be 480±10 Mm ( D ) X 510±10 Mm ( W ) And Back Size Shall Be 510±10 Mm ( W ) X 440±10 Mm ( H ) From Seat. Overall Height Shall Be = 870±10 Mm, Overall Depth = 660±10 Mm & Overall Width = 560±10 Mm. , Clerk Table Specifications: Supplying And Placing A Modular Table With An Overall Size 1200Mm X 600Mm X 750Mm. The Top Of The Table Shall Be Made Of 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Profile Of The Top Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Shall Be Supported On Crca Rectangle Pipe Frame Having Cross-Section Area 40Mm X 20Mm With 1.6Mm Thick. The Table Understructure Shall Be Supplied With Crca Rectangle Pipe Having Cross-Section Area 40Mm X 20Mm. The Gable End Shall Be Given At One Side Made Up Of 0.8Mm Thick Perforated High Yield Strength Crca Sheet Of Grade D Confirming To Is:513. Fixed Pedestal Unit With Powder Coated Metallic Body Shall Be Supplied With 3 Nos. Of Drawer I.E. 2 Box+1 Filing At One Side. All The Drawer Shall Be Synchronized Locked With Central Locking Mechanism By One Single Key. The Drawer Shall Be Operated With Abs Plastic Recessed Handle. The Manufacturer Shall Have Basic Quality And Safety Certifications Like Iso-9001:2015, Iso-14001: 2015, Iso-18001:2007. , Book Case Specifications: Providing And Supplying Metal Book Case With An Overall Size 915 Mm ( W ) X 320 Mm ( D ) X 1750Mm ( H ) . The Book Case Shall Be Supplied With 4 Nos. Of Individual Compartments. Top, Back & Side Panels Shall Be Made Of 0.8Mm And Rest 1Mm High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Each Door Shall Have Individual Locking Provision And 4 Mm Thick Transparent Glass For Clear Inside Vision Secured In A Metal Frame Through Rubber Gasket. Each Door Shall Have Scissor Mechanism For Receding Inside The Top Of Respective Compartment Which Ensures Parallel & Smooth Movement. Each Door Shall Have Plastic Side End Caps As Handle Which Is Easy To Grip. Each Compartment Has A Storage Shelf Having Uniformly Distributed Load Capacity Of Each Shelf Is 40 Kg Maximum. The Finish Is Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. , Library Rack Specifications: Providing, Supplying And Placing Double Side Steel Library Racks In Perfectly Upright And Straight Position. The Overall Size Of The Rack Shall Be 940Mm ( W ) X 600Mm ( D ) X 2110Mm ( H ) . The Rack Shall Be Supplied With 4 Nos. Of Adjustable Shelves On Both Side I.E. 10 Loading Levels. Rack, Side Panel, Skirting Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Side And Top Shall Be Covered With 18Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823. The Edges Of The Board Shall Be Sealed With 2Mm Thick Pvc Edge Banding. The Add-On Units Can Be Stacked Width Wise To Form A Bank Of Racks Having Common Side Panel. The Shelves Shall Be Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 80Kg Maximum. Each Shelf Shall Be Provided With Stiffener At Bottom For Strength And Back Stiffener For Separator Between Front And Rear Shelf. All Steel Components Shall Be Epoxy Polyester Powder Coated To The Thickness Of 40-60?. Adjustable Leveler Shall Be Provided With Metal Insert To Resist Scratches On The Floor And Also Level & Support Structure. , Storage Rack Specifications: Providing, Placing And Installing A Slotted Angle Rack With An Overall Size 900Mm ( W ) X 400 Mm ( D ) X 1800Mm ( H ) . The Panel Shall Have 5 Nos. Of Shelves Made Up Of 1.2 Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Crca Slotted Angle Shall Be Supplied With 3 Mm Thick Having Size 40Mm X 40Mm. All Steel Components Shall Be 40-60? Thick ( Dft ) Powder Coated After 7 Tank Pre-Treatment Process Flow. Corner Plate ( Gussets ) And Fasteners Shall Be Provided For Complete Assembly. , Computer Table Specifications: Supplying & Placing Computer Desk With An Overall Size 1500Mm ( W ) X 750Mm ( D ) X 750Mm ( H ) . It Should Have Work Top Made Up Of 25Mm Thick Pre-Laminated Particle Board Of Grade Ii Of Is 12823 With Approved Laminate And Finish As Per Approved Shade. The Top Profile Shall Be In Rectangle Shape And The Edges Shall Be Sealed With 2Mm Thick Thin Strip Of Impermeable Pvc That Is Cut To Fit The Size Of Board Panel And Duly Pasted With The Assistance Of Edge Banding Machine At 200 Degree Celsius. The Top Board Shall Be Supported On Fixed Pedestal At One End And Fixed Cpu Unit At Another End. The Desk Shall Be Clad With 18Mm Thick Modesty Panel Which Provide Structural Support For The Desk. The Modesty Panel Shall Have The Size 690Mm X 600Mm With 18Mm Thick Pre-Laminated Particle Board Connected With Both End. 18Mm Thick Pre-Laminated Board Base Keyboard Tray Shall Be Provided With An Overall Size 684Mm X 350Mm. The Keyboard Trey Shall Be Operated By Sliding Channel To Enable Smooth Operation. A Fixed Pedestal Shall Be Provided With The Size 400Mm X 620Mm X 725Mm At One End With 3 Drawer Operated On Roller Channel And 1 Filing Drawer Operated On Ball Bearing Channel. All Drawer Shall Be Operated With Ss Handle With Multi-Purpose ( Mp ) Locking Mechanism. Other Side Of Table Open Type Storage Shall Be Provided With The Size 400Mm X 600Mm X 725Mm Having One Adjustable Shelf To Accumulate Cpu. Complete Understructure Made In 18Mm Thick Pre-Laminated Particle Board With Appropriate Edge Banding And Drawer Base Shall Be 9Mm Thick. To Protect The Wall From Kicks, Abrasion And Serve As A Decorative Moulding Skirting Shall Be Provided At Bottom Of The Pedestal At Both Sides. The Manufacturer Shall Have Quality And Safety Assurance Like Iso-9001:2015, Iso-14001:2015 And Iso-18001:2007. , Three Seater Visitor Bench Specifications: Supply And Installation Of Bench 3 Seater For Waiting Room: Cross Beam Shall Be Made Up Of Black Powder Coated Rectangular M.S.Erw Tube Having 8 ± 0.03 Cm X 4 ± 0.03 Cm X 0.2 ± 0.014 Cm Size. Leg And Armrest Shall Be Chrome Plated Made Of Cold Rolled Steelwith 0.12 ± 0.013 Cm Thinkness. Seat Back Shell Shall Be 1.6 Mm Thk Powder-Coated Perforated Shell Made From Cold Rolled M.S. Sheet 0.14 ± 0.013 Em Thickness. Theside Bar Shall Be Made Of Chrome Plated Solid Steel 3 ± 0.03 Cm X 1.2 ± 0.3 Cm ( Din174 ) With Fluting And Plastic Inserts.The Shell Shall Be Assembledon The Cross Beam With Help Of M8 Bolts ( Per Seat- 8 Nos. Seat To Bracket And 4Nos. Bracket To Cross Beam ) . The Seat & Back Cushion Shall Be Made Up Of Pu Foam Upholstered With Leather Cloth Or Fabric With Plywood. Overall Dimensions Shall Be Seat Height - 40.0Cm, Height - 67.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-163.0Cm And Depth-57.0 Cm. , Student Desk Cum Bench Specifications: The Class Room Desk Consists Of Front Desk, Middle Row Comprising Of Seat For Front Desk, Back Supported & Jointed With It The Desk Behind For Another Seat, Back & Another Desk For The Person Sitting Behind And So On Till The Last Row Which Shall Consist Of Seat Only, Provided With Back Support. Thus The Desking System Shall Consist Of One Row Of Front Desk, Several Rows Of Middle Seat & Back Desk & Again One Last Row Of Back Seat. A. Front Desk: Top Size: 1200Mm X 375Mm X 18Mm Thick For Two Seater Desk. ( 36 Nos. ) Top Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. ( 180 Nos. ) Made Of 18Mm Thick Commercial Plywood On Top, Front And Rear Edges. 800Mm High In Front And 750Mm Inside Shall Be Fixed To The Main Frame With Steel Inserts And Galvanized Bolts. All Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue. All The Exposed Edges Shall Be Made 36 Mm ( 18+18Mm ) And 1 Mm Thick Laminate On Top, Front And Rear. Below The Top Is Provided A Storage Shelf For The Students To Keep Their Bags, Books Etc. The Vertical Leg Supporting The Storage Shelf Below The Working Top Must Provide Enough Leg Room For Ease In Moving In & Out Of Desk. Also, There Should Be No Sharp Edges Of The Side Supports To Prevent Hurting While Moving In & Out. The Front Of The Desk Should Be Cladded With 18Mm Thick Commercial Plywood Plus 1 Mm Laminate, Held Inside The Front Frame With Edges Within The Frame To Provide Protection To The Board On Edges.Underside Of The Table Shall Be Finished With 0.6 Mm Thick Laminate Of White Colour. B. Middle Seat & Desk: Shall Consist Of Seat, Back & Writing Shelf Behind And Storage Shelf Below It. The Detail Specifications Will Be As Under: Seat Size: 1200Mm X 375Mm X 18Mm Thick For Two Seater Desk. Seat Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. Made Up Of 18Mm Thick Commercial Plywood On Top, Front And Rear Edges Shall Be Fixed To The Main Frame With Steel Inserts And Galvanized Bolts. All Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue. All The Exposed Edges Shall Be Made 36 Mm ( 18+18Mm ) And 1 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Laminate Of White Colour. Back Size: 1200Mm X 375Mm X 18Mm Thick For Two Seater Desk. Back Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. Made Up 18Mm Thick Commercial Plywood On Top, Front And Rear Edges ) Shall Be Fixed To The Main Frame With Steel Inserts And Galvanized Bolts. All Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue. All The Exposed Edges Shall Be Made 36 Mm ( 18+18Mm ) And 1 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Laminate Of White Colour. Writing Shelf: 1200Mm X 375Mm X 18Mm Thick For Two Seater Desk. Writing Shelf Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. Shall Be Made Of 18Mm Thick Commercial Plywood On Top, Front And Rear Edges 36Mm Below The Top Edge Of The Back To Prevent Interference With Student Sitting On The Front Seat. C. Last Row: ( Back Row ) The Last Row Consists Of Seat & Back Only Mounted On 50 X 25 X 1.6Mm Thick Crca Pipe Frame. Back Row Size: 1200Mm X 375Mm X 25M Thick For Two Seater Desk. Back Row Size: 1800Mm X 375Mm X 18Mm Thick For Three Seater Desk. Made Up Of 18Mm Thick Commercial Plywood On Top, Front And Rear Edges Shall Be Fixed To The Main Frame With Steel Inserts And Galvanized Bolts. All Exposed Sides Shall Be Protected With 2.0Mm Thick Pvc Edge Binding Tape Affixed With Hot Melt Glue. All The Exposed Edges Shall Be Made 36 Mm ( 18+18Mm ) And 1 Mm Thick Laminate On Top, Front And Rear. Underside Of The Table Shall Be Finished With 0.6 Mm Thick Laminate Of White Colour. The Frame Shall Be Made From 50 X 25 X 1.6Mm Thick Crca Steel Pipes. Suitably Designed For Maximum Strength & Stability. Only For The Provision Of The Storage Shelf And Cladding Fixing, 25 X 25 X 1.6Mm Thick Crca Pipe Shall Be Used. The Entire Cladding, Shelving Shall Be Pre-Laminated Particle 17Mm Thick. The Seat, Back & Writing Desk Shall Be 25Mm Thick Particle, Laminated On Both Sides, Top Laminate & Balancing Laminate On Back As Mentioned Above. All The Frame Front, Middle And Last Row Shall Be Affixed To Floor With 8 X 75Mm Anchor Fasteners. Also, The Top, Back & Seat Shall Be Affixed With Metal Inserts & Galvanized Bolts. Wood Screws Shall Not Be Used Anywhere Steel Welding Wherever Required, Shall Be Done By Mig Welding Process To Minimize Distortion And For The Deep Penetration Of The Weld. All The Steel Components Shall Be Pre-Treated For De-Greasing, De-Rusting And Phosphating. After Proper Pre-Treatment, The Steel Components Shall Epoxy Power Coated And Oven Baked At Temp. Above 200 Deg. C To Provide Scratch Resistance Surface Coating Film Of Thickness 50-60 Microns. Note: 1. Crca Steel Pipes Shall Be Of Tata / Jindal Make. 2. All Pre-Laminated Particle Boards Shall Be Of Action Tesa / Marino / Godrej Make. Two Seater , Three Seater , Big Almirah Specifications: Providing, Supplying And Placing Steel Almirah In Perfectly Upright And Straight Position. The Overall Size Of The Almirah Shall Be 915Mm ( W ) X 485Mm ( D ) X 1980Mm ( H ) Including Legs. It Should Be Supplied With 4 Nos. Of Adjustable Shelves I.E. 5 Loading Compartments. Door Shall Be Made Of 1Mm Thick And All Other Components Shall Be Made Of 0.8Mm Thick High Yield Strength Crca Sheet Of Grade ‘D’ Confirming To Is: 513. Stiffeners Shall Be Provided In Shelf & Door. The Steel Hinged Door Shall Be Provided With Locking Mechanism Which Is Assembled With Bolt Arrangement. The Shelves Shall Have Folded Constructions Which Have Intrinsic Rigidity And High Load Carrying Capacity. Uniformly Distributed Load Capacity Per Each Shelf Shall Be 40Kg Maximum. The Complete Steel Structure Shall Be Constructed By Welding And Provide Finishing With Epoxy Polyester Powder Coated To Be Thickness 50-60?. , Supply And Installation Of Recta Workstations - 900W X 600D Providing And Placing Tile Based Modular Workstation, With Partitionthickness As 50-60 Mm And Ht -1200 Including Powder Coated Aluminium Trims.Tiles On Main Spine: Combination Of Top Tiles Are Plb / Fabric Tackable / Whiteboard Tile. Bottom Tiles - Plain Metal. Fin: 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 2X9 Mm Thk Plb Boards Wrapped With Laminate At Intermediate Block And Top Block. Bottom Block Is Finished In Metal Finish. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Decorative Laminate / White Board. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finish. ( Decorative Laminate ) Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. The Partition Has Two Integrated Raceway Provided One At Skirting Level And Another At The Work Surface Level Thus Ensuring Separation Of Power And Networking Cables. Necessary Cut Outs For Switches As Per Site Requirement Will Be Provided. Cost Of Switches And Wires Not To Be Considered In Furniture. It Will Be Supplied By Department Separately. Side Panels Or Legs - Made Of 25 Mm Thick Pre-Laminated Particle Board With Flat Pvc Lipping Edge Binding Tape Considered Only On The Open End Conditions Or Metal Powder Coated Legs At The End And Shared Condition. Pvc Edge Binding Tape Should Be From Rehau Or Dolken Of Germany. System Shall Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. Work Surface - Made Of 25 Mm Thick Pre-Laminated Particle Board Confirming To Is:12823 Interior Grade With Post Forming On Front Only Of Size 900 Mm W X 600 Mm D. Note: All Partitions And Side Panels Have Leveling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 20 Mm Of Uneven Flooring.Raceway:-The Raceways Are Made Out Of 0.8Mm Thick Crca & Powder Coated. The Electrical Raceway Can Be Provided Below Worktop Or Above Worktop, These Are Hook On Type Which Will Be Mounted On The Verticals. The Skirting / Data Raceway Is Hollow And Will Be Mounted On The Raceway Channels Cpu Trolley Fixed Type:Cpu Trolley: The Metal Tray Is Made Of 1.0 Mm Thick Crca Sheet And Side Support Is Made Of 0.8 Mm Thick Crca Sheet. On Wall Side ( With Common Side Partition Sharing ) , Back To Back ( With Common Side Partition As Well As Common Central ) , Chairs For Lab-Clerk-Computer Without Arm Revolving: Specifications: Providing, Supply And Placing The Seat And Back Is Made Up Of 12Mm Thick ( 7 Layers ) Hot Pressed Plywood / Pvc Frame Moulded In Polyurethane Foam Of Density 45±2Kg / M3. The Dimensions Of Seat Shall Be Minimum 45.0Cm ( W ) X 42.0Cm. ( D ) And Of Back Shall Be 40.0Cm ( W ) X 47.0Cm. ( H ) . The Seat And Back Covers Shall Be Injection Moulded In Black Co-Polymer Polypropylene. The Back Ply And Foam Is Designed With Contoured Lumber Support For Achieving Comfortable Seating Posture. The Hr Polyurethane Foam Shall Be Moulded With Density.=45±2.Kg / M3and Hardness Load 16±2 Kgf As Per Is:7888.For 25% Compression. The Permanent Contact Mechanism Shall Be Designed With 360° Revolving Type, 14±2°Maximum Back Tilt Only, Upright Position Locking, Tilt Tension Adjustment. The Pneumatic Height Adjustment Shall Has An Adjustment Stroke Of 11.0 ±0.3Cm. The Bellow Shall Be 3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. The Pedestal Shall Be Injection Moulded In Black 30% Glass-Filled Nylon And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Shall Be 62.0 ±0.5Cm. Pitch-Centre Dia. ( 72.0 ±1.0Cm With Castors ) . The Twin Wheel Castors Shall Be Injection Moulded In Black Nylon. Overall Dimensions Of Chair Shall Be Seat Height - Min 43.0 To Max 54.0Cm, Height - Min87.5 To Max 98.5Cm, Width & Depth Of Chair As Measured From Pedestal - Width-71.0 Cm And Depth-71.0 Cm. Gas Lift: Gas Lift Pipe Diameter 50Mm And Has An Height Adjustment Stoke Of 110Mm. , Supply And Installation Of Line Programmer Computer Labs Specifications: Table 1500W X 750D X 750H Providing And Placing Table 1500W X 750D X 750H Desk Based Modular Workstation With System Ht - 750Mm. Understructure: Made Of Erw Pipe 50 X 50 X 1.6Mm Thick Duly Powder Coated With 50-60 Micron. Comprising Of Metal Powder Coated L Connectors Between Legs, Legs Made Up Of Metal Powder Coated Finish And The Entire Assemply Is Fixed To The Worktop With The Help Of Abs Plastic Spacers 20 Mm High Which Gives The Floating Look To The W / S Module. Wire Management : Metal Powder Coated Cable Pole Of Size 170Mm W X 85 Mm D X 705 Mm Ht Is Given To Pull Wires From The Floor Junction Box Upto The Power Box Fixed Under Neath The Worktop. Aluminium Access Flaps On Worktop Above Power Box Cut Out For Accessing Switches. To Carry Wires Forward Through W / S Mesh Type Wire Carrier Assembly Is Provided Below Worktops. Modesty Panels - 25 Mm Thk Plb Modesty X 450 Mm Wide. Work Surface -Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500W X 750D X 750H
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Haryana View Result →
27.
Educational and Research Institute #10365642 Price Bid
Tender For Comprehensive Annual Operation And Maintenance Works & Services At Central University Of Rajasthan.; 1 Comprehensive Annual Operation and Maintenance Works & Services 2 SH-I (a) Deployment of Maintenance Gang for day to day Civil Maintenance work at CURAJ 3 SH-I (b) Operation And Maintenance Of 750 KLD Sewerage Treatment Plant at CURAJ 4 SH-II (a) Electrical & Mechanical Preventive And Day To Day Maintenance Works, Annual Operation, Repair, Maintenance And Periodic Servicing Works Of Pump Houses And Annual Electrical Works At CURAJ 5 Annual preventive and day to day maintenance, to upkeep all the electrical internal & external installations, fittings, fixtures, wiring, Lights, Fans, Geysers etc. functional in the CURAJ campus, for all days in a month, including Sundays and Holidays, including manpower, labour, machinery, general maintenance items, tools & tackles for all deputed staff, safety tools for LT & HT power supply, various type of ladders/tipaya/chopaya etc. as required on site, complete in all respects, as per standard practice. Indicative items are as under: • Wiring/Cabling.• Metal/PVC boxes.• Switches, sockets and accessories of different ratings.• 01phase/03 phase power points & circuits.• 01/03 phase Energy Meters.• Light points/ Fan pts/ Exhaust Fan pts/Call bell pts. etc.• All type of indoor and outdoor lights (conventional/LED/HPSV/MVSV etc.) fittings.• All type of fans (Ceiling/Exhaust/pedestal/wall).• HVLS fans.• Water heaters.• Auditorium stage lights.• Air curtains and electric fly catchers.• Rising mains bus trunking and overhead bus bar of different ratings.• Sandwich rising mains with aluminium bus bar of different ratings.• Switch, disconnector, SFU and MCCB of different ratings.• MCBs, Isolators, RCCBs and MCB DBs of different ratings.• Cable and Boxes of different sizes.• Brass compression glands of different sizes.• Aluminium lugs of different sizes.• HT/LT Cable fault detections and jointing kits.• Overhead electric line.• Road lights.• Lightning arrester and earthing system.• All Electrical indoor and outdoor panels and panel rooms of all buildings.• Maintenance of records etc. and as per tender document. 6 Comprehensive Annual Electrical Operation, Repair, Maintenance and Periodic Servicing Works of pump houses and other water & booster pumps/motors/starters along with associated panels and accessories for all days in a month including Sundays and Holidays, including manpower, machinery, spare parts, consumables, tools & tackles for all deputed staff, safety tools for LT power supply, ladders, ropes etc. as required on site, complete in all respects.Note: Tentative quantity of motors & pumps of different ratings is 30. 7 Providing of uniform to all the deputed staff with reference to (a & b) above, as prescribed by the University and as per tender document. 8 CPWD DSR (E&M) 2022/Chapter-01: Wiring.The bidder has to quote the rates above / below / at par on DSR (E&M) 2022 rates (including all) considering estimated cost of work Rs. 5,00,000/- 9 CPWD DSR (E&M) 2022/Chapter-02: MCCB, MCB, DBs.The bidder has to quote the rates above / below / at par on DSR (E&M) 2022 rates (including all) considering estimated cost of work Rs. 1,00,000/- 10 CPWD DSR (E&M) 2022/Chapter-05: EarthingThe bidder has to quote the rates above / below / at par on DSR (E&M) 2022 rates (including all) considering estimated cost of work Rs. 1,00,000/- 11 Detection of fault in underground electric Low Tension (LT)/High Tension (HT) cable incl. fault detection machine charges, digging & labour charges etc. complete in all respects as per standard practice. 12 Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor LT cable of 1.1 KV grade as required. 13 3½ X 25 sq. mm 14 3½ X 35 sq. mm 15 3½ X 50 sq. mm 16 3½ X 70 sq. mm 17 3½ X 95 sq. mm 18 3½ X 120 sq. mm 19 3½ X 150 sq. mm 20 3½ X 185 sq. mm 21 3½ X 240 sq. mm 22 3½ X 300 sq. mm 23 3½ X 400 sq. mm 24 4 X 16 sq. mm 25 Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor HT cable of 11 KV grade as required : 26 70 sq. mm 27 120 sq. mm 28 185 sq. mm 29 240 sq. mm 30 300 sq. mm 31 400 sq. mm 32 General inspection & patrolling of about 10 km long overhead HT/LT lines feeder wise for identification of maintenance work to be carried out i/c strengthing of cross arms with clamps including tightening of nut bolts, removal of birds nest and foreign material from line along with tree/bush trimming under these lines. (to be carried out before starting of summer season and as per the requirement). 33 Annual Servicing of Fans (Ceiling/Exhaust/Wall/Pedestal etc.) installed in various buildings of the University i/c checking the unit with accessories for functionality tests, replacement of nut-bolts & locking pins/clips wherever reqd, oiling/greasing, cleaning, pasting of service/repair slips on fan and any other minor repair works required on site i/c labour, tools & takels charges as per standard practice and directions of EIC. Note: 1) This work also includes replacement of spare parts of fans like condensors, regulators, fan hooks as required during servicing and these spare parts will be provided by the University.2) This work excludes all major repair works like rewinding, replacement of bush/bearing etc. 34 Copper rewinding of existing burnt fans (Ceiling/ Exhaust/Wall/Pedestal Fans) under buyback of old copper incl. handling charges etc. as per standard practice. 35 Replacement of parts like bush/bearing etc. with new one of same size/rating under buyback of faulty one as per standard practice incl. handling charges. 36 Repairing of rotor/stator/shaft etc. of fans as required as per standard practice incl. handling charges. 37 Comprehensive AMC Work of Online UPS(s) of different ratings installed in various buildings of CURaj 38 Comprehensive AMC Work of Online UPS(s) of different ratings installed in various buildings of CURaj, including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects excluding replacement of batteries.Note: This work includes general R&M on monthly basis, preventive R&M and servicing on quarterly basis and unlimited breakdown calls through qualified & experienced persons. 39 14 Nos. 1 kVAOnline UPS 40 08 Nos. 2 kVA to 3 kVA Online UPS 41 08 Nos. 5 kVA to 6 kVAOnline UPS 42 02 Nos. 10 kVA Online UPS 43 06 Nos. 15 kVA to 20 kVA Online UPS 44 02 Nos. 40 kVA Online UPS 45 Replacement of following capacity faulty/dead SMF rechargeable batteries with new batteries of same rating/capacity along with connections, testing and commissioning etc. as required on site as per standard practice, under buyback offer. Make: Exide/Amaron/Luminous/HBLWarranty:minimum 02 years onsite or as per OEM, whichever is higher. 46 18 AH, 12 V 47 26/28 AH, 12 V 48 42/45 AH, 12 V 49 65 AH, 12 V 50 75 AH, 12 V 51 120 AH, 12 V 52 150 AH, 12 V 53 Comprehensive AMC Work of 86 Nos. Water Coolers of 150 LPH capacity each, installed in various buildings of CURaj 54 Comprehensive AMC Work of 86 Nos. Water Coolers of 150 LPH capacity each, installed in various buildings of CURaj, including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects.Note: This work includes general R&M on monthly basis, preventive R&M on quarterly basis, annual servicing and unlimited breakdown calls through qualified & experienced persons. 55 Repairing of 45 Nos. faulty Water Coolers of 150 LPH capacity each, installed in various buildings of CURaj including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice before starting the CAMC of faulty equipment. 56 SH-II (d) Comprehensive AMC Work of HVAC System (Ductable / VRV-VRF / Cassate / Split / Tower / Window Type Air Conditioners and ETAC System) installed in various buildings of CURajComprehensive AMC Work ofHVAC System (Ductable / VRV-VRF / Cassate / Split / Tower / Window Type Air Conditioners and ETAC System) installed in various buildings of CURaj, including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice and directions of Engineer-in-Charge.Note: This work includes general R&M on monthly basis, preventive R&M and servicing on quarterly basis and unlimited breakdown calls through qualified & experienced persons. 57 100 hp rated inverter technology based VRV/VRF type Air Conditioning System installed in CIL Building. Make: Hitachi 58 40 hp rated inverter technology based VRV/VRF type Air Conditioning System installed in VCS, Admin Building. Make: Hitachi 59 04 Nos. 11.0 TR capacity Ductable Air conditioning units with Scroll Compressor with R 410 A Refrigerant, vibration isolators etc. complete. Make: Hitachi 60 03 Nos. 5.5 TR capacity Ductable Air conditioning units with Scroll Compressor, R 410 A Refrigerant, vibration isolators etc. complete. Make: Carrier 61 03 Nos. Ceiling-mounted 3.0 TR Cassette Air Conditioning units complete. Make: Bluestar 62 400 Nos. Window/Split/Tower type air conditioners. 63 02 Nos. 30000 CFM, Air ducting system (ETAC) 64 04 Nos. 28000 CFM, Air ducting system (ETAC) 65 02 Nos. 10000 CFM, Air ducting system (ETAC) 66 02 Nos. 4000 CFM, Air ducting system (ETAC) 67 Repairing of faulty 100 Nos. Split ACs, 10 Nos. Tower Air-conditioners and 01 No. 5.5 TR Ductable AC, installed in various buildings of CURaj including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice before starting the CAMC of faulty equipment. 68 SH-II (e) Comprehensive Annual Operation, Repair and Maintenance of 04 Nos. 11/0.433 kV electric sub-stations and 05 numbers DG Sets at CURaj. 69 Comprehensive Annual Operation, Repair and Maintenance of 04 Nos. 11/0.433 kV electric sub-stations and 05 numbers DG Sets along with associated panels etc. through OEM/Authorized Service Agents of OEM only, including manpower for operational purpose, labour, machinery, spare parts, Control Panel/DG Set Batteries, consumables, tools & plants etc. complete in all respects, as per standard practice and directions of Engineer-in-Charge.Note: 1) This work includes operators in all three shifts on 24*7*365 basis at each ESS.2) This work includes general R&M on monthly basis, preventive R&M on quarterly basis, annual servicing i/c all B/C/D checks and unlimited breakdown calls through qualified & experienced persons, as per OEM’s standard guidelines & service manuals. 70 SH-II (f) Comprehensive Annual Operation (in general shift), Repair and Maintenance of 14 nos. Johnson make, machine room less passenger lifts at CURaj. 71 Comprehensive Annual Operation (in general shift), Repair and Maintenance of 14 nos. Johnson make, machine room less passenger lifts along with associated panels etc. through OEM/Authorized Service Agents of OEM only, including manpower, labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice.Note:1) This work includes one lift operator in general shift on 24*7*365 basis in Admin Building.2) This work includes general R&M on monthly basis, preventive R&M on quarterly basis, annual servicing and unlimited breakdown calls through qualified & experienced persons, as per OEM’s standard guidelines & service manuals. 72 SH-III Comprehensive Annual Repair & Maintenance Work of Fire Hydrant System and Fire Alarm System installed at CURaj. 73 Comprehensive Annual Repair & Maintenance Work of all Fire Hydrant System installed in various building of the University (tentative buildings = 30 nos.) as specified in Schedule of Work, including manpower, labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice.Note: This work includes general R&M on monthly basis, preventive R&M and servicing on quarterly basis and unlimited breakdown calls through qualified & experienced persons. 74 Comprehensive Annual Repair & Maintenance Work of all Fire Alarm System and associated equipment installed in various building of the University as specified in Schedule of Work, including manpower, labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice.Note: This work includes general R&M on monthly basis, preventive R&M and servicing on quarterly basis and unlimited breakdown calls through qualified & experienced persons. 75 Repairing of existing non-functional Fire Hydrant System including associated equipment, installed in B1 to B7 Hostel buildings, KV Building and B/C/D type Staff Quarter Blocks of CURaj including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice before starting the CAMC of faulty equipment. 76 Repairing of existing non-functional Fire Alarm System including associated equipment, installed in various buildings of CURaj including labour, machinery, spare parts, consumables, tools & plants etc. complete in all respects, as per standard practice before starting the CAMC of faulty equipment. 77 SH-IVComprehensive Annual Maintenance Contract for RO Plants/Purifiers. 78 The scope of work includes comprehensive annual maintenance and servicing of RO Plants/Purifiers and submitting a report after every visit. The scope of work includes checkup of each Unit/system and general cleaning, chemical cleaning of cartridge, if required, replacement of all type of membrane, all type of filters, all pipes, S.V., TDS Controller, all type of sensors, pump etc. as per requirements of the University during the CAMC Period. 79 Supply and Installation (under buy back) of Reverse Osmosis Plant of 50 LPH Capacity Make Eureka ForbesNote: Old Reverse Osmosis Plant of 50 LPH Capacity - Make Eureka Forbes will be the property of the Contractor. Hence contractor may be advised to quote their rates accordingly. 80 SH-VComprehensive Operation and Maintenance of IT Works. 81 Comprehensive Operation and Maintenance of installations IT Works (Operation & CAMC of Audio & Video Conferencing System, Networking items for LAN and Wi-Fi systems like Switches, Active & Passive network components, Smart class rooms Equipments including PA systems, Hardware and software maintenance of Computers, Laptops, Printers, Projectors, Servers), CCTV Systems. as per the details given below: 82 Hardware Items 83 Laptops : 84 Desktop System: 85 Server: 86 Printers: 87 LCD Projector: 88 CCTV System 89 IP Camera 90 DVR Camera 91 Switch (24 port) 92 Switch (8 port) 93 Switch (4 port) 94 42 Screen 95 32 Channel NVR 96 8 Channel NVR 97 4 Channel NVR 98 Surveillance Hard Disk 10 TB 99 Surveillance Hard Disk 4 TB 100 Surveillance Hard Disk 2 TB 101 Biometric Access Control Systems 102 Face Biometric Machine 103 Voice System 104 IP-PBXMachine 105 IP Phone 106 IP Phone DSS KEY 107 Data Networking System 108 Switch(48 Port) 109 Switch (24 Port) 110 Core Switch 111 LAN points 112 Audio Video Conferencing System 113 Group Video Conferencingdevice including camera, speakerphone with USB plug-and-play connectivity 114 PTZ Video Conferencing Camera 115 Smart Classrooms System including PA System 116 Smart Classroom equipped with, interactive screen 75/86 inch, audio systems, digital podium with mini PC, PTZ cameras and other related items 117 SH-VI Comprehensive Maintenance of Horticulture and operation & maintenance of Drip Irrigation System. 118 Horticulture Manpower in General Shift in all days except Sundays and holidays (Unskilled). All tools tackles shall be arranged by contractor within its quoted rates.• Complete maintenance of Trees, Plants and peripherals, shrubs, hedge, lawns, (Including cricket ground, hockey ground and football ground etc.) cemented potted plants, flower beds, creepers etc. within the campus of the Central University of Rajasthan.• Maintenance includes weeding, pruning, gap filling, watering, mowing of lawn, hoeing, hedge-clipping, application of insecticide & pesticide, top dressing of lawn with good earth and manure including other maintenance work as directed by the University from time to time.• Fertilizers, Manures, plant protection materials etc. will be provided by the contractor nothing extra shall be paid in this regard.Maintenance of Drip Irrigation System, (water sprinkler system installed at cricket, football and hockey grounds and another places of the University etc.) periodical checking of the system cleaning, oiling, greasing, routine maintenance, realignment, necessary safety arrangements & repair/ replacement of consumables such as Super flow screen filters, Gravel filters, Pressure relief valve, Non return valve, stainless steel pressure gauges,by pass valve PP, PVC control/ball valves, sub main flush valve, Reinforced nylon air release valve CPVC gate valves, super flow disc clean filters, PVC pipes and fittings etc. as per direction of Engineer-in-charge. This shall include all cost involved in maintenance except for electricity for operation, which shall be provided by the University free of cost. 119 SH-VIIMechanized Housekeeping Services, Garbage Collection & Disposal Services, and Pest Control Services at CURAJ. 120 ProvidingMechanized House Keeping Service include machine enabled cleaning, sweeping, wiping, dusting, moping, freshening, garbage collection, segregation & disposal, vacuum cleaning, scrubbing and any other similar tasks as assigned by CURAJ authorities from time to time.Consumable, like duster, Soap, chemicals, wipers, Phenyl and other cleaning materials for toilets and floor required as indicated in list under the scope of work etc.All façade glass should be cleaned once in a month including glass doors and windows.Providing pest Control Services, Rodent Control Services, Fogging & Fumigation against mosquito & larva, Fly management services, termite treatment etc. as per tender terms and conditions and directions of the University. 121 Termite Treatment: Termite treatment in the University based on IS:6313(Part-3)-1981 specification which consists of creating uninterrupted chemical barriers inside and all around the building. The treatment should be drill holes of 6mm as close as possible to the plinth, walls, junctions of the walls at an interval of 6 inches enough to reach the soil below 6 inches deep. Then chemical emulsion should be injected into these holes, which should be subsequently sealed using white cement match with floor colour all complete , The wall should be spray the chemical emulsion up to roof height wherever required complete. 122 SH-VIII Hiring Manpower with fixed remuneration through outsourced agency at CURaj. 123 Service charges per month per person(To be quoted for deciding the lowest responsive bid to award the work)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
28.
Public Administrative Department #10363312 Price Bid
Tender For Construction Of New Office Building Of Municipal Board Nawa - CIVIL WORKSClearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 2 Earth work in excavation by mechanical means (Hydraulic Excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 3 Add extra for foundation/trenches/drains for every additional lift of 1.5 Mtr. or part thereof inAll kinds of soil 4 Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. 5 Supplying chemical emulsionin sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20% 6 Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion) . 7 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). (UNDER FLOOR) 8 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). (FLOOR UNDER FOOTING AND FOUNDATIONS 9 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M25 grade Design Mix by usingmin 410 kg of cement per Cum . 10 Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor Walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M25 grade Design Mix by usingmin 410 kg of cement per Cum . 11 Providing and laying in position specified grade ofcement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcementfor Beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. M20 grade Nominal Mix / Design Mix 12 Providing and laying in position Ready mix concrete manufactured in fullyautomatic Batching Plant andtransported to site intransit mixer for having continous agitated mixer, manufactured as per approved mix design of specified grade of RCC work including pumping of R.M.C. from transit mixer to site of laying , exculding the cost of centering, shuttering and reinforcement with all lead and lift including cost of admixtures in recommended portion as per IS 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge.All works upto floor V floor. Design Mix by usingM-25 grade concrete by using min 410 kg of cement per Cum 13 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 14 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for : Walls (any thickness) including attached pilasters,buttressesplinthandstring course. 15 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 16 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel propsand removal of formwork for upto floor five level for :Columns, pillars, posts and struts etc. 17 Add extra for additional height in centring, shutteringwhere ever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at alllevels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan are is to be measured) 18 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level.(Original producers who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) Thermo-mechanically Treated bars (Conforming of relevent IS code) 19 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Grade 304 20 Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m) fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes. 21 Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). 22 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 23 Half Brick work with mechanised autoclaved flyash lime bricks conforming to IS: 12894 :2002 of class designation 75 in superstructure above plinth level upto floor V level in. Cement mortar 1 : 6 (1 cement : 6 coarse sand) 24 Add extra providingand placing in position 2 Nos. ,6mm Ø M.S. barat every thirdcourse of half brick masonry 25 Providing and fixing Stone jali 40mm thick Red/Pink sand stone throughoutin cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali patterns to be cut square to jali slab without any chamfers etc: 26 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish : 20mm thick . 27 6 mm thick cement plaster to ceiling of mix1:3 (1cement : 3-fine sand) 28 Providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completeNew Plastered Surface (three or more coats) 29 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding:Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect 30 Finishing walls with textured exterior paint of required shade as per approved colour complete as per manufacturers specificationsincluding primer coat and protecting coat including scaffolding and safety provisionTrowel Finish av. thickness 1500 to 2000 microns. 31 Painting with synthetic enamel paint of approved brand and manufacture togive an even shade :Two or more coats on new work 32 Making of drip course (Tapka) in cement sand mortar 1:6 width upto 40 mmand 10 mm thick as per approved design 33 Making grooves as per design in plaster 10mm to 20mm wide. 34 P & F 1st quality Heavy Duty Vitrified Double Charged tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.Size 600X600mm 35 size600 mm X 1200mm 36 P & F 1st quality Heavy Duty Vitrified glazed MAT tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. size600 mm X 600 mm 37 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 38 Extraforusingsize above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finishedtiles in place of 300mm x 300mm size. 39 Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) For area of each slab from 2001 to 5000 Sq.Cm 40 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001Sqcm 41 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 42 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles includingrubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) Medium shade using approximately 50% white cement and 50% ordinary cement. 43 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.South Red1501 Cm2 to 3600 Cm2 Tiles 44 Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite/Kota Stone Work Full Edge moulding 45 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete 46 Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete 47 Providing and fixing 1st quality standard Marble printed/ Granite Shade or Light/dark shad glazed tiles confirming to IS : 13753 & IS :15622 of size 300mm x 600mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 48 Providing and fixing wall panelling using soft wood frame of size 50x25mm @600 mm c/c in both directions duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using : ISI 9 mm teak ply one side BWR 49 Providing and fixing pressed steel door frames confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applyinga coat of approved steel primer after pre-treatment of the surface including filling with CC 1:2:4(M15 grade) complete as directed by Engineer-in-charge : Profile E 50 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesinin glue both sides with approved steel fittings complete as per annexure A: 35 mm thick . Commercial Veneer both side 51 Extra for providing external lipping with 2ndclass teak wood battens 6 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item no. 8.13. 52 Providing & Fixing mica of approved make for inner/outer side of shutters with fevicol & nails completeas per approved by engineer in charge. 0.8mm thick mica 53 Providing and fixing M.S. sheet 1mm thicksingle leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 54 Providing and fixing fully panelled /partly panelleddouble leaf shutters frame for windows and ventilators as per approved design and drawings with approved steel fittings as per Annexure ‘A’ and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide, beading of 25mm x 15mm size on both faces : 35 mm thickGhana wood grade I 55 Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent withpair ofCP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 56 Providing and fixing of uPVC casement fixed windows or ventilators manufactured in ISO 9001:2000 & 14001:2004 certified company. Frame : Made from the Extruded uPVC Window Profile Section of size 60 x 60mm having outer wall thickness of 2.25mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2mm thick G/J/U/O TYPE GI section. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of acCumulated water, if any, to outer side. Fix Mullion made of 76 x 60mm uPVC Profile Section with steel reinforcement shall be provided in windows as per the requirement. Frame shall have ‘O’ type EPDM gasket fitted in in-built groove of frame profile for proper air & sound insulation of the shutter. Glazing bead of size 34 x 20mm with ‘K’ & ‘O’ type inner and outer EPDM weather seal gaskets alongwith 5mm thick ISI make plain float glass.All welding joints of frame and shutter shall be cleaned and milled with the CNC mechanism to provide uniform grooved finish on all visible joints. Hardware : Installation at Site : Complete window is to be installed on site with 10 x 100mm fastners with white cap in existing pre-finished wall cut-out cemented to glass level plane at all height & width and silicon glue is applied to fill up the crevices between wall and window frame. Complete in all respect as per the drawing and specifications and direction of engineer-in-charge. (Insert 6mm tougend glass) 57 Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, White in finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, two for sliding of window shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milled with drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side.Shutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut & thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-Eweather seal gaskets alongwith 6mm thick ISI make plain float glass. Mesh shuttershall be made of 39w x 69h mm Extruded 3 box multi-chamberUPVC Window profile section of white colour having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymer mesh and rollers/pully. (Insert 6mm tougend glass) 58 Providing and fixingaluminum workfor doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portionPowder coating aluminum( minimum thickness of powder coating 50 micron) 59 Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basicitem.)With float glass panes of 8 mm thickness 60 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminatedparticleboardwithdecorativelaminationononesideandbalancinglaminationonotherside. 61 Grading roof for water proofing treatment withwater proffing compoundCement mortar 1:3 (1 cement : 3 coarse sand) 62 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 63 Making khurras 450 x 450mm with average minimum thickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster 1 : 3 and one coat of neat cement, rounding edges and making and finishing the out let complete. 64 Providing & laying broken glazed titles on roof ( broken glazed tilesnot less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg ofVG-40 (30/40 )grade and 0.30 Kg/Sqm. OfVG-10 (80/100) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineer-in-charge. 65 Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40mm wide and 4mm thick 66 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. b) Second layer of slurryof cement @ 0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners,junction with polymer mixed slurry. 67 Providing&fixingprecastcementconcretecoping1:2:4mix50mmthickcompleteas per specification : 68 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-voilet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall confoim to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 5.0mm thick (Wt. 8.4 Kg./Mtr. Sq.) 69 Providing & fixing 12 mm thick tegular edge Glass Fibre Reinforced Gypsum False ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/Sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per 70 Providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS 2095- Part I at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. 71 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 72 P & F water closet Seat Covers with brass hinges complete :Solid PVC (ISI marked) grade-I White for EWC. 73 P & F White Vitreous China Double Syphonic European W.C. (I.S:2556Mark) with mounted W.V.C. flushing cistern of (IS : 2556 Mark) of 10 litre capacity complete with all necessary internal fittings including cutting and making good the wall and floor. 74 P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (IS :2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor: (Size 580x440 mm.) 75 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall: :PVC with PVCbend as per IS : 7231 . 76 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 630 mm x 500 mm dia for counter top 77 P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick 78 Stainless Steel Sheet size 125mm dia. Heavy Quality of approved make 79 P & F Liquid Soap Container with brackets complete of approved make: C.P. brass 80 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 81 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:15 mm dia nominal boreB Class 82 25 mm dia nominal boreB Class 83 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.15 mm dia nominal boreA Class 84 25 mm dia nominal boreA Class 85 50 mm dia nominal boreA Class 86 Concealed pipe in wall including painting with anticorrosive bitumen paint 15 mm dia nominal boreB Class 87 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C.P. Brass bib cock,15mm nominal bore. 88 P & F Stop Cock(IS :8931 Mark),superior quality & ofapproved make: Brass 400 gm. 15mm nominal bore. 89 P & F Ball Cock (IS :1703 Mark) with Rod& P.V.C. Ball complete : Brass wt.Not less than 400 gm, 20mm. 90 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 91 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. 92 Gun-metal 25mm nominal bore. 93 Gun-metal 50mm nominal bore. 94 P & F Gun-metal Non-return Valve or Check Valve (IS :Make) of approved make, superior quality:50mm nominal bore. Horizontal 95 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved desig1000 Lt. Capacity 96 500Lt Capacity 97 Hoisting Charges for each floor :For ITEMS 2.26.1 TO 2.26.4 98 For ITEMS 2.26.5 TO 2.26.8 99 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /makeincluding joining the pipe with solvent cement rubber ring and lubricant110mm dia 100 160mm dia 101 P&FrigidPVCpipefittings(IS:4985mark)ofapprovedquality/makeincludingjoining the pipe with solvent cement rubber ring and lubricantCoupler (socket)75mm dia 102 110mm dia 103 160 mm dia 104 Reducer 110 X 75 mm110mm dia 105 160 mm dia 106 Plain Tee75mm dia 107 110mm dia 108 160 mm dia 109 Door Y110mm dia 110 160 mm dia 111 Bend 45110mm dia 112 160 mm dia 113 Bend 87 .5110mm dia 114 160 mm dia 115 Door Bend (Top Side110mm dia 116 Vent Cowel110mm dia 117 P- Trap110mm dia 118 Gully trap110mm dia 119 Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M 120 Construction of Man hole, in all types of soil, inner size 1.5 x 1.2 M, with 450mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50 mm thick M-15 grade C.C. flooring making channels, 80 mm thick stone slab covering with 40 mm thick M-15 grade C.C.flooring, Ferro Cement cover with frame of 450mm dia, earthwork etc. complete including disposal of surplus earth within 50 mtr. lead as per design :Depth up to 1.5 M 121 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. Inside size 450 x 450mm depth upto0.5 M Cement cover with frame 122 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users) 123 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make75 mm dia 124 110 mm dia 125 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /makeCoupler75mm dia 126 110mm dia 127 Bend 87.5 Dg.75mm dia 128 110mm dia 129 Bend 45 Dg.75mm dia 130 110mm dia 131 Door Bend 87.5 Dg.75mm dia 132 110mm dia 133 Single Y75mm dia 134 110mm dia 135 Socket Plug75mm dia 136 110mm dia 137 Pipe Clip75mm dia 138 110mm dia 139 Nahani trap with jali 4110mm dia 140 Vent Cowel 110mm dia 141 P & F W.V.C. (IS: 2556 Mark) Squatting Urinal of standard make complete. Including cutting & making good the floor:Size 450x350mm 142 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (small) size 456x355x265mm. 143 Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 240 Cm. dia outside & 240 Cm. depth 144 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 145 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 Sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed : All kinds of soil 146 Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. 147 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. :M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominal size). 148 Providing laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in wet mix plant, carriage of mixed material, laying in uniform layers with motor grader, F.E.loader on a prepared surface and compacting with vibratory compactorto achieve the desired density including all material, labour, mach-nery, lighting barricading and maintenance of diversion complete.[MoRTH specification Clause 401] includiong with all lead 149 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand ) including making joints with without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete including painting etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineerin- charge). 150 M-40,80mm thick to be used in medium- traffic ( Medium traffic is defined as a daily traffic of 150-450 commercial vehicles exceeding 30 KN laden weight, or an equivalent of 0.5 to 2.0 MSA for a design life of 20 years.) like city streets, small and medium market roads, low volume roads, utility cuts on arterial roads, etc Category A Denated units to key into each other on four faces zigzagshape as per IRC SP 63:2004 151 Construction oftubewell up to 100m depth and above to accomodate housing and assembly pipe in all types of alluvium strata by rotay drilling method with code of practice for construction and testing of tubewells (IS:2800 (Part-II) : 1991 and IS:2800 (Part-II) :1979 both amended up to date) with supply of bail plug if necessary.The work will not include cost of housing pipe and strainer pipe assembly cost, gravel and development work. Work would be deemedcompleted only after obtaining sound free water during pumping.200 mm nominal bore 152 Diameter 900 mm+C159Construction of Recharge Shaft in filter pit including Earth work Excavation , lifting excavted earth with all lift and 50 m lead and centering & shuttering evenever required. 153 Supply & fixing Pre-cast RCC Rinngs at the mouth of recharge shaft of M20 mix with40 mm thicknessDiameter 900 mm 154 Supply & lowering air line of 25mm dia, G.I. pipe B class having perforation 3 to 5mm size all arrow of G.I. pipe in Zig-Zag fashion & making air vent at top including the cost of Tee-Nipples, Elbow, Socket etc. 155 Supply and lowering vent air pipe 63mm dia rigid PVC pipe(IS 4985) mark class II (4kg per cm2 ) with required all necessary fittings including perforation of 3 to 5 mm size all around the pipe at a distance of 180 to 220mm in zig zag fashion and making air vent at top complete as per direction of Engineer incharge. 156 Supply & lying River-gravels of following sizes in recharge shaft, filter pit after screening & washing from kachha shift without deduction of voids Size 9 to 12 mm 157 Size 3 to 5 mm 158 Supply & laying of clean, clear sharp river sand of size 1 to 2mm coarse, without deduction of voids. 159 Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985. 200 mm Nominal Bore. 160 Supply and Fixing of Big steel Almirah overall size of916mm (W )x486mm (D )x1980 mm(H) with weldedconstruction. It should have the shelf thickness of 0.7mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high y eld strength) and all other components shall have a thickness of 0.9mm. The Almirah should have a Mazak handle and Three way locking mechanism with Shooting Bolts.It should have a height wise adjustable shelf mounting .Itshould also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated. Plenty of colour options and shelving options shall be available ISimarka brand (Godrej or equivalent) as per approved colour, shape,design,type by engineer in charge. 161 Supply and Fixing of small steelAlmirah overall size of 760mm (W )x455mm (D )x1325 mm(H)with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. The Almirah should have a 2 Mazak handle and Three way locking mechanism with Shooting Bolts.It should have a height wise adjustable shelf mounting.It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated.Plenty of colour options and shelving options shall be available ISimarka brand (Godrej or equivalent) as per approved colour, shape, 162 Providing and supplying Canning Chair of size 455mm X 580mm X880mm. IIshould have wooden canning support at back and bottom supported by steel frame 3 2mm thick,powder coated round pipe with full armwooden handles onsides and other fittings as per direction of enaineer in charae. 163 Providing and supplying Canning Chair of size 455mm X 580mm X880mm. IIshould have wooden canning 4 support at back and bottom supported by steel frame2mm thick,powder coated round pipe without woodenhandles as per approved colour, shape,design,type by 164 Providing and supplying Officer high back Chair, The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around.The back foam is designed with contoured lumbar support for extra comfort. BACK SIZE:65.0cm.(W) X 71.0cm.(H) SEAT SIZE:65.0cm. (W) X 65.0cm.(D) andreinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seaUarmrest connecting strip assembly made of steel.The center pivot mechanism Is designed with the followingfeatures:360 revolving type.Tilt tension 5 adjustment. Upright locking.The pneumatic height adjustment has an adjustment stroke of 12.5 cm..The pedestal Is made of HR steel and fitted with 5 nos.twin wheel castors (castor wheeldia. 5.0cm.). The pedestal is covered with a P.P moulded cladding for modem and aesthetic looks.The pedestal is 65.0 cm. pitch-centre dla.(75.0 cm with castors). The twin wheelcastors are injection moulded In 30% Glass Filled black Nylon, as per approved colour, shape,design,type by engineer In charge. 165 Providing & Supplying table or size 1500mmx900mmx750mm, Top should be nnished with 18mm MDF Bos:d post formed Both side with 0.6mm laminate of approved make & design & with appropriate balancer on the bottom or the top. All verticals supportsincluding Modestypanel should be of 18mm prelaminated MDF Board with 2drawers & 16 Swing door per approved design.The drawers to beprovided with ai:proved handles and fixed on Telescope channels.AppropriateEdge Bendings to be provided where necessary with PVC beading 2mm thick to be provided. Footrest to be provided with 1Bmm MDF prelaminated board of the same color code.P&F PVC wire managers capslo be provided on the table top, as approved colour,shape, design,type by engineer In Charge 166 Providing & Supplying side table of size 900mmx450mmx750mm. Top should be finished with 18mm MDF Bos:d post formed with 0.6mmlaminate oras same as the Table,approved make & design & with appropriate balancer on the bottom or the topAllvert icals supportspanel should be of 1Bmm prelaminated MDF Board. Having 2Drawers & 1Swing7 door CPU unit. Keyboard tray, with mouse rest to beprovided.Appropriate Edge Bendings to be provided where necessary with PVC beading 2mm thick to be provided as per design.The drawers to be provided with approved handles and fixed on Telescope channels.P&F PVC wire managers caps to be provided on the table top, as per approved colour, shape,design, 167 Providing and $Upplylng table of size 1200mmX 750mmX750mm high as per design. The table top should be finished with 0.6mm thick laminated postrorming on 18mm thick MDF board.The 3 drawer unit (provided withlocking mechanlsm)and all other8 exposed vertical supports should be finished with steel members or approvedshade,colour and make.Appropriate moulding/edge bindingto be provided where necessary with PVC beading 2mm thick lo be provided as per approved colour, shape,design, 168 Providing & Supplying Computer table of size 900mmx450mmx750mm.Top should be finished with 18mm MDF Bos:d post formed with 0.6mmlaminate or as same as the Table,approved make & design & withappropriate balancer on the bottom or the topAllverticals supports panel should be of 1Smm 16.00 Each 12100.00 1g3500.oo prelaminated MDF Board. CPU uni Keyboard tray,with mouse restlo be provided.Appropriate EdgeBendlngs to be provided where necessary with PVC beading 2mm thck to be provided as per approved 169 Providing & Supplying depository/cashcabinet made up of CRCA steel with external size or 5g1 x 460 x 460 mm,2 nos of lockable drawers and single door cabinet fitted 3.00 Each 22848.00 68544.00with 6 leverlock system 1vith completein all respect. (approx weight 160 kg to 180 kg) as per approved 170 Book Case - 4 Door Book Case shall have the configuration or 914mm(W)x320mm(D)x1742mm(H). The unique design provides the right rigidity to the Top hinged doors ,which shall faci itate easy use.The Book Case shall be made fromprime quality steel. It shall have a Rigid Knock Down Conslructlon.The TopPannel, Back Pannel and Side Pannel are made from 0.7mm high yield CRCA andother components from O.Smm CRCA. Each door shall have a 6 Lever Cam Lock with Comrron Key. 3mm thick glass should beused in each door for clear inside vision whih shall besecured Ina metalframe through a rubber gasket.11 Scissor Mechanism should be providedin each door for 20.00 Each 17248.00 344960.00receding Inside the top or every compartment andItshall ensure parallel and smooth movement. Each door should be provided with plastic side end caps as handle which Is easy to grip.Each compartment shall have a storage shelf with good capacity. The 4 Door Book Case shall have 18mm PLB Top straight edge with PVC lipping.The Hn shlngshall Include Epoxy powder coated.Complete work as per the as per approved colour,shape,design,type by engineer in charge. 171 150 cm high fencing of precast R.C. posts of 15cmx15cm tapered to 10x10cm at top placed at every 3m apart 30cm in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth posts to be strutted with same R.C. posts provided with 6 horizontal lines and two diagonals of black barbed wire between the two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete 172 FIRE FIGTHING WORKProviding, Fixing, Jointing, Testing & Commissioning of Heavy duty MS C class (Heavy) pipes conforming to IS 3589 / 1239 part-I for hydrant and sprinkler applicationsincluding cutting, screwing, welding etc. & forged steel fittings like elbows, tees, tapers, reducer, gaskets etc. fixing the pipe on the wall/ceiling with suitable clamps, hanger and nuts bolts including cutting hole and chase in brick or RCC walls/ slab and making good the same. complete with painting of one coats of Red Oxide and two or more coats of synthetic enamel paint of requiredshade complete as required. (Pipe to be tested @ 10Kgf/Sqcm for 2 Hrs.). All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 150 mm dia 173 100mm dia 174 80mm dia 175 50mm dia 176 40mm dia 177 32mm dia 178 25mm dia 179 Supplying and fixing first -Aid Fire hose reel Drum wall mounted swinging type with MS construction powder painted in post office Red, conforming to IS 884-1985 with upto date amendments, complete with the following as required.(A) Thermoplastic / Rubber Hose(B)20 mmdia UL, FM Bronze / SS nozzle with 5mm orifice (C)Drum and brackets for fixing the equipments on wall.(D) Connections from riser with 20/25 mm dia Brass/GM gate valves with screwed end and conforming to IS:778 Class-1through Forged steel Screwed Union & M.S. pipe. Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . With 30 m x 20 mm High Pressure Braided Rubber Hose as per IS:5132 - 1969and Bursting pressure 42 Kg/sqcm 180 Supplying and fixing of SS 304 Single / Double headed oblique pattern hydrant landing valve (internal/external) with 75 / 100 mm dia flanged inlet & 63 mm dia instantaneous type female outlet coupling with cast iron wheel complete with ABS cap and chain and all accessories as per IS:5290-93 (Type-A) in cluding matching flange (14 mm thick),nuts, bolts, washers, gaskets,etc as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Single Headed with 75 mm Dia. Flanged Inlet 181 Supplying and fixing of flexible hose made with 100% polyester, black EPDM internal rubber lining with External coat of synthetic elastomer (IS:636, type-A)63 mm dia, 15 mtr. Long RRL hose pipe with instanteneous type 63 mm dia SS-304male and female couplings(IS:903) duly bound and riveted to hose pipes with copper rivets and SS wire etc. as required.Appropriate Test Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. 182 Supplying & fixing SS-304 Short Branch Pipeconforming to IS: 903:93 fitted with 20mm (nominal internal diameter)bore nozzle, for projecting water in form of solid jet. The Branch shall have 63mm Male Instantaneous Inlet, suitable for use with 63 mm size Fire fighting hoses. H.P. tested to 21 kgf/cm² for 2.5 minutes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 183 Supplying and fixing of 750 mm x 600 mm x 250 mm Outdoor application Fire Hose Cabinet made of 1.6 mm thick MS sheetDuly powder coated in red color externally and white internally with 6 mm thick glazeddoors with Expanded Metal 2 mm thick Jali including necessary locking arrangement suitable to accommodate 2 Nos 15 Mtr. Long RRL Hose and 1 No. branch pipe on Existing Wall / Angle Iron Frame as required. (Cost of MS structure for mounting Frame is to be Paid Extra) All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 184 Providing and fixing of Fire / Electrical Shaft Door made frompowder coated (50 Micron) aluminiumpartialy glazed with 6 mm thick glass and Partialy/ Fully Louvered with Outer frame of AluminiumSection of Size 100 mm x 45 mm x 1.5 mmand Shutters Top, Middle & sideSection of Size 82 mm x 45 mm x 1.5 mm, Bottom Section of Size 110 mm x 45 mm x 1.5 mmComplete with Hinges, Tower bolt, Handle, Aldrop, Locking Arrangement including dash fasteners of required dia and size, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. as per drawings and the directions of Engineer-in-charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 185 Supplying, Installation, Testing & Commissioning ofElectrical Driven fire fighting duty Terrace pump as per TAC andIS 12469-1988., Factory assembledin Pump make OEMsuitable for automatic operation and consisting of following details given asA, B, C, D, E, F, G and H.(A) Horizontal End suction Centrifugal Back pull type pump complete for delivery of below mentioned discharge and Head(B) Material of construction : Pump Casing - Cast Iron, Impellor- Bronze, Shaft - SS 410, Packing - Mechanical Seal(C) Squirrel cage induction motor (IE-3 Class) suitable for 3 phase, 415 V, 50 HZ, Ac supply , Class -F Insulation, Synchronous speed not Exceeding 3000 RPM, T.E.F.C confirming to IP:55 , of required HP suitable for the above pump ,along with flexible (Love Joy type) coupling , coupling guard complete in all respect .(D)Common bed plate fabricated frommild steel channel for installation of pump and Motor including anti vibration pads.(E) The Hydrostatic tests (2 times of design operating head or 1.5 times the shut off head whichever is higher) and performance tests (to determine developed head, Pump BHP and efficiency v/s Flow) of pumps along with trip test shall be carried out at manufacturer’s works in Virtual / Physical presence of Department’s representatives.(F) Physical & Chemical Test reports of i) Pump casing (ii) Impeller (iii) Shaft (iv) Shaft sleeveand Dynamic Balance certificate is to be submitted by OEM(G) Suitable size Reinforced cementconcreat (M-30) foundation with foundation bolt, Nozing Angle of size 40mm x40mm x5 mm ( Cost of RCC Foundation to be paid Extra )(H) Weather proof hood fabricated from 5mm thick UV stablised FRP sheet supported by 50 mm x 50 mm x 5 mm Angle Iron fram above pumpset to protect it from weather All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR 450 LPM with 35 mtr head 186 Supplying and fixing Inlet Breeching Connection of CI body with Gun Metal male instantaneous inlet couplings with Inbuilt NRV, Drainage Connection with 50 mm Brass gate valvecomplete with PVC blank cap and chain as required for 150mm dia Outlet with 1 no. Matching Flange (Minimum 16 mm thick), nuts, bolts, washers, gaskets,etc as required of following Ways. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 4 Way 187 SITC of installation control valve of cast iron body and brass/bronze working parts comprising of water motor alarm, bronze seat clapper, and clapper arm, hydraulically driven mechanical gong bell to sound continous alarm when the wet riser/Sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets,etc as required of following sizes.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 150mm dia 188 Supplying and Fixing of PN 16 Cast Iron Dual Plate Wafer Type Check Valve / Non return valve with SS / Bronze flap complete with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets,etc as required of following sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 80 mm dia 189 100 mm dia 190 150 mm dia 191 200 mm dia 192 Supplying and Fixing of PN 1.6Butterfly Valve (Wafer Type) with S.G Iron Disc and confirming to IS:13095 complete with 2 no. Matching Flanges (Minimum 16 mm thick), nuts, bolts, washers, gaskets,etc as required of following sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 150 mm dia 193 100 mm dia 194 80 mm dia 195 Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC typeFire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificatefrom OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 6 kg 196 Supply & Fixing of CO2 type Fire Extinguisher conforming to IS:15683:2018, charged with CO2 gas (purity 99.7% conforming to IS 15222), Powder coated Internal & External Surface Manganese steel ISI marked as per IS 7285 cylinder body , Wheel type Forged brass release valve ISI Marked as per IS 3224 with Inbuilt safety release device ((Fusible plug and Rupture Disc Type), 1.0 Mtr. Metal wire braided hose having minimum bursting pressure of 140 Kgf/cm2, Horn with metallic thread connection, QR code for Product Traceability,including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificatefrom OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSRCapacity 4.5 Kg. 197 Supplying and Fixing ofGalvanized Mild Steel fire bucket Confirming to IS: 2546 : 1974 with one coat of primer and two coat of enamel paint of approved shade on Angle Iron ( 50 x 50 x 5 mm) Stand of Size 800 x 1240 x 400 mm with MS 22 SWG Galvanized Canopy, 4 Hooks for Bucketsincludingassociated civil works etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 198 SITC of UL 10th edition / EN54 / VDS certified Addessable Manual Call point (MCP) with LED/ FIRE Indication Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 199 SITC of UL 10th edition / EN54 / VDS certified Addressable sounder with strobe light,Loop Powered / Direct powered from FACP with sound level 90 dB and programmablefrom the panel etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 200 SITC ofResponse Indicatorfor indicating the activation of the Remotely located Detector for Conventional type detectors as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 201 SITC of EN / LPCB/ UL listed / approved conventional automatic fire Alarm Rate of Rise cum fixed temperature thermister typeHeat Detectors , 12 / 24 volt D.C., visual alarm indicator (LEDs) Blink - green in stand by and Steady - red in alarm complete in all respectswith baseas required.including the cost of all accessories Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 202 SITC of EN / LPCB/ UL listed / approved conventional automatic fire Alarm Optical/Photoelectric type smoke detectorsof photo-optic sensing chamber, 12 / 24 volt D.C., visual alarm indicator (LEDs) Blink - green in stand by and Steady - red in alarm complete in all respectswith baseas required.including the cost of all accessories Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 203 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR2 x 1.5 sq.mm 204 3x 1.5 sq.mm 205 Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002in existingsurface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR4 Pair 206 2 Pair 207 Supplying and fixingof CE certified and UL listed GI wire mesh cable tray made from spot welded steel wirehot dipped galvanised between 60 and 80 microns of zinc as per BS 729including horizontal and vertical bends, reducers, tees, cross members and other OEM made accessories like wall clamp, hold down clamps, Earthing terminal, brackets as required, and duly suspended from the ceiling with electro-zinc coated TF rods,etc. as required of following sizesAll as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .500 mm x 100 mm x 6 mm 208 300 mm x 100 mm x 6 mm 209 SITC of UL 10th edition / EN54 / VDS certifiedActive Repeater Panel for Fire Alarm System with inbuilt networking port (both RS485 & Ethernet),Serial port for printer,two supervisory inputs,two position key switch and USB port for programming. The Repeater Panel shall allow users to acknowledge, reset,silence, program, view hisory events.etc (All functions similar to main panel)The user interface of the repeater panel shall be same as the Main Controller with menu driven user interface with smart search.including the cost of all accessories Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 210 SITC of PA system Operator Console of following wattage to be installed withConventionalfire alarm systemcomplete with following capacity , channel mixing amplifier , 1 no cardioids goose neck microphone , 1 no professional grade cassette deck/ CD Player , 16 zone floor selector console ,equipment rack complete in all respects. PA system shall be coupled to the Fire Alarm System. Etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 1x 240 Watt 211 SITC 6 watt Speakermounted in M S sheet box with perforated front mesh for PA and Emergency System. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 212 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)inrecessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & itsISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thickHot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSRMedium point (up to 6 mtr.) 213 Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694)in recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & its ISI marked (IS:3419-1988) accessories, round tiles, 2 Nos Hot Dipped Galvanized M.S Modularbox of 1.2 mm thickwith earth terminal,2 Nos10 A two way Modular switch, 3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate,screws,making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSRLong point (up to 10 mtr.) 214 Long point(up to 10 mtr.) 215 Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) inrecessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its ISI marked (IS:3419-1988)accessories, Hot Dipped GalvanizedModular box of 1.2 mm thick with earth terminal, 10 A modularswitch, 3/5 pin 6 A modular socket, Modular face plate with grid plate, screws, making connections, testing etc. as required.For specification of copperConductor,Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSRMedium point (up to 6 mtr.) 216 Long point(up to 10 mtr..) 217 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR3x 1.5 sq.mm 218 3x 2.5 sq.mm 219 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 220 2 x 6.0 sq. mm. + 1 x 4.0 sq. mm. 221 2 x 6.0 sq. mm. 222 4 x 10.0 sq.mm 223 4 x 16.0 sq.mm 224 P & F 1.2mm thickM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR 225 Providing & Fixing ofBEEStar rated copper wounded double ball bearing capacitor start, aluminium body & Metallicblade ceilingfanConforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) 226 Providing & Fixing ofof BLDC Technologyventilating fans , single phase with PVC impeller, ABS body, Double Ball bearing, automatic back lower shutterincluding making connection, testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .250 mm sweep with Min. Air delivery 1150 cmh, 1300 RPM 227 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRSingle pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 228 Double pole MCB(With B/C curve tripping Characteristics) 6 A to 32 A rating 229 Three pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 230 50/63 A rating 231 100 A rating 232 Four pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 233 50/63 A rating 234 Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) conforming to (IS:12640-1)/ IEC 61008 -1 , rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock,min. operation 10,000 upto 63 A rating and5000 for 100 Aratingand minimum phase termination capacity of 35 sq.mm. rigid wire, IP 20 contact protection with existing distribution board / sheetincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRTwo pole 30 mA sensitivity6A-32 A rating 235 40 A rating 236 Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRGlazed door (single phase) IK-09 and IP-43 with Metal end box8 Way (8+2) 237 Metal door (Three phase) Per phase isolation, Horizontal IK-09 and IP-43 with Metal end box6Way(Incomer 8,Sub Incomer2+2+2) 238 Providing & Fixing of Recessed/surface mounting heavy duty Vertical TPN Distribution board with Metal end box withprovision of incomer suitable for MCB / RCCB and SP / TP MCB as outgoing ,made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted with reversible door (for double door DB only ) complete with insulated 100 A rating copper bus bar, neutral bars with shrouds, earth bar , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR6 Way(8+18) 239 Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost ofISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification ofWiring accessories refer ChapterE - 07related item & For additional technical parameters of product / work refer Annexure A attached with this BSR 240 Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonatewith brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,minimum width ofswitch toggle( PUSH PART ) should not less then 20mm,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 25 Amp.2 Moduleswitch With LedIndicator 241 Providing & Fixing of modular type lockable feature socket dulymade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR25 Amp. 2 Module Socket 242 Providing & Fixing of following modular accessories as per PWD specification for electrical Works,made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating , includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure A attached with this BSRRJ-11 telephone jack Double line 243 RJ-45, Cat 6 computer jack with shutter 244 Providing & Fixing offollowing size mounting grid plates with cover plates made from fire retardent UV established high performance engineering plastic suitable for all universal metal boxes for front installation & removal direct fit type complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .1 Module 245 4 Module 246 Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printedmade out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tipwith IP-20 rating ,includingall as per pre approved by Engineer in charge,making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure A attached with this BSR5 step fan regulator 2 Module 360 dgree rotating 247 Plate Earthingas per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying3 to 4 mtr. below the ground level with 20mm dia. G.I. B class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height250 to 300 mm. and embodying the pipecomplete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or lessas required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 248 Supply & Laying following size earth stripin horizontal or vertical run in surface by means of Earth strip DMC Insulatorincluding riveting/ soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 25mm x 6mm G.I. ( Hot Dipped) Strip 249 Supply & Laying following size B class , Medium class G.I. Pipe confirming to IS : 1239 P - 1 ( 2004 ) with accessories like bend, socket etc.for laying earth conductor/ strip / cable in ground/ surface/ recess as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 40 mm dia. 250 Providing & Fixing of IP20 SMD Mid Power LED batten type integrated light fixture made from Powder coated Extruded aluminiumhousing with in built driver, System lumen efficacy ≥ 110 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, CRI >80 , life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , Maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .1170mm(+/-10%) LED batten with min. lumen output 2200 lm 251 570mm (+/-10%) batten with min. lumen output 1000 lm 252 Providing & Fixing of IP20, 2x2 LED Surface/ Recessedmounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection(Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 ,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/ 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted.All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .Minimum lumen output 3600 lm 253 Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / SqaureSMD Mid Power LED Downlight with power coated die-cast aluminum housingwith UV Stabilized non yellowish Diffuser withBIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency > 85% . System Lumen efficacy of ≥ 110 lm / watt, THD < 10 % , Pf.≥0.95, CRI >80,life time of minimum50000 Burning Hours with , 70% of intial Lumen maintaned till life ends, CCT 3000°K / 4000°K/5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be ofBIS standard andtrade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing onhousing.OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .Minimumlumen output 650 lm 254 Minimum lumen output 1950 lm 255 Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 256 Supplying and drawing PE Insulated & PVC Sheathed unarmoured telephone cable with 0.5 mm dia. Solid Annealed electrolytic grade bare Copper Conductor as per IS: 8130/84 &confirming to TEC specification GR / WIR/06-03 March 2002in existingsurface or recessed conduit/casing capping. including ferruling on each pair for Identification etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR2 pair 257 Supply and Laying of PE Insulated, PVC Inner Sheathed, armoured & PVC Sheathed Telephone Cable. with 0.5 mm thick Solid Annealed Bare Copper Conductor as per IS: 8130/84 telephone cable confirming to TEC specificationsGR/WIR 06/03, Mar.-2002 in existing pipe / open trench / Cable tray / on surface including making necessary connection, testing etc. as required of size. For additional technical parameters of product / work refer Annexure A attached with this BSR50 pair 258 S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along withISI marked (IS:3419-1988) accessories as requiredinrecessincludingcutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure A attached with this BSR25 mm 259 Supplying and fixing of ISO Certified company made Krone module with base frameas per PWD specification for electrical Works, in the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted., including dressing, ferrulingandpunchingof telephone cable with krone tool etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .50 Pairs 260 CCTV SURVEILLANCE WORKSupply, Installation, Testing and Comissioning of Rack mounted 19 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panelswith Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Modular Patch Panel Loaded with Cat -6A I/O 261 Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected byPVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack &ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 262 Supply and Installation of unsheilded/360 degree sheilded Information outlets made of high impact plastic body with ABS, FR Grade halogen free material with provision for protection against dust in jack, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated Insulation displacement contact, with easy lock mechanism, It supports IEC 60603-7-4 and complied with ANSI/TIA/EIA 568 C.2 standard. jack should be RJ11,RJ12 & RJ45 compatible. Should support Ethernet 1.2 Gb/s ATM,Digital video and broadband/baseband analog video, Voice over internet protocal (VOIP) Specifications in existing modular/MS Boxes along with necessory connections as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Cat 6A, Sheilded Information Outlet 263 Supply & fixing of square Faceplate for Flush / Surface Mount Information Outlets Single/Dual or Quad Aperture ,material should bePC+ABS body, Suitable for RJ45 unshielded/shielded connection modules. Should match with I. O. OEM. Dimensions should be 86mm X 86mm as required complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Single Aperture 264 Supply, Installation, Testing and Comissioning of Rack mounted 19 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panelswith Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . Modular Patch Panel Loaded with Cat -6A I/O 265 Supply & Installation of IP-20 & IK-08 , UL ListedWall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with UMarking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19 angles with wall mounting provision on wall. Accessories like: 1 No of 19 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19 1U, mountable socket strips with 5 nos of 5A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastneretc as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 9 U Rackwith Width 600 mm & Depth 400 mm + 100 mm 266 Supply , Installation, Testing and Comissioning of Managed Layer-2 Intelligent PoE Giga Ethernet Switch providing 24 x 10/100/1000 MBPSPoE Giga Ethernet ports and with min 4 SFP Giga Ports (provision for Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with minimum 370 Watt PoE Power Budget with related LAN Base Software including making connections etc as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 267 SITC of 2 MP IR Fixed Dome Network Camera -1/2.7″ Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.002Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Video tampering, UL, CE, FCC certified. 268 Supply Installation testing and commissioning of 32 Ch Network Video Recorder- Connect Up to 64 IP Cameras, Up to 12 Megapixels Resolution, HDMI1/VGA1 and HDMI2/VGA2 outputs provided, atleast one HDMI output with 4K (3840 × 2160), atleast one VGA output with 2K (2560 × 1440) resolution, Support H.265/MJPEG, Supports N+1 hot spare system, Supports RAID0, RAID1, RAID5, RAID6 and RAID10, Supports HDD hot swap, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, 1 × eSATA interface, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 10 TB, Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0, Alarm I/O 16/4, RS-232, RS-485, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface,Multiple network monitoring: Web viewer, CE, FCC, UL certified. with 30 days backup capacity asrequired. 269 SITC of professional PC alongwith printer and other accessories as required having minimum i7 processor, 8 GB graphic card 1 Tb SSD as per requirement. 270 SITC of 42 inch full HD professional LED display for CCTV monitoring. 271 External Electrical WorkS I T C of star ratedAluminium wound distribution Transformerof following rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & as per BEE star - 1 & BIS approved as per IS 2026- 1977 & lossesas defined as per 2014 (Fourth Revision) Level-1 . including standardaccessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C upto 200 KVA & 40-45 degree C for above 200 KVA, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint,including carrying of pre-commission Testing & Charging of Transformer complete in all respect .The Transformer shall be subjected to routine factory tests (as per IS:2026 and IS:1180) including testing from CTLof discombefore charging of transformer & complete installaion must be certified from Electrical Inspectorate office as per Indian Electricity rule, (CTL testing charges and Electrical Inspection charges shall be reimbursed by the department to the contractor). All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 100 KVA 272 SITC of PLC Based Auto main failure (AMF) Panel fabricated from CRCA sheet steel 2 mmThick , Powder coated finish , Engine Start & Stopcommands, control Relays , Ammeter & Voltmeterwith selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, UPS, operator interface panel complete in all respect suitable for following capacity DG sets: Appropriate Test Certificate/ report of product/accessories from OEM/Panel Manufecturer shall be submitted. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR .20 to 40 KVA 273 Supply & fabrication steel structure with MS channel / angle / joist / ISMB / sheet etc. including welding, rivetting, cutting, nut & bolt , one coat of primer & two coat of enamel paint etc. as requiredcomplete in all respect. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 274 Providing & Laying XLPE insulated three core ArmouredAluminiumcable for working voltage 11 K.V.(E) confirming IS :7098 P - 2withH4- Grade electrolyticaluminium conductor confirming to IS: 8130 class-2 of purity >99.6 %, Insulation Screening: Extruded Semiconducting Compound followed by helically wrapped Copper Tape, round / flat strip armouring of cables , Inner / outer sheath PVC type ST-2 confirming to IS:5831in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray includingtesting etc. as required of following size. OEM must have its own in house NABL accrediated Laboratory for testing procedure as per IS:10810 All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .3 core 150.0 Sq.mm 275 MAIN LT PANELSITC of IP-42 and general construction confirming to IS:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel as specifications andOther parameters requiredas per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)Thickness of CRCA sheet shallbe 2.0 mm,cable alley compartments having concealed hinged type doors with key type lock with / withoutdetachable extension type structure. Removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, Water rinsing, Activation, derusting,pickling in acid bath, phosphatising & shall be subjected to nine tank process and then Powder coated with approved shade of minimum 70 microns on both side of panel.The panel having PE foam/ Neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c)Interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar(>63 amp ) . control wiring will be carried out with 1.5 Sq.mm, Earth wire with 2.5 Sq.mm and CT with 2.5 sq.mm flexible copper wire only.All joints / interconnections of copper bus bar shall be dully tinned . Clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar Bus bar is insulated by Heat Shrinkable sleeves . Earth and Neutral bus bar shall be half of the size of phase bus bar. ( Cost of Bus bar/ Flexible wire for Interconnection between Main busbar and Switchgearis to be Paid Extra )(d)Wiring between components within switchgear and Incoming / outgoing cableshall be done through the terminal block only. Direct connection shall not be permitted. Each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. For tap-offs, adjacent terminals with shorting strips shall be used. 10% Spare terminal blocks shall be provided. Wire identification on marking strip shall correspond to the designation of the wiring diagrams. All wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram. (e)All wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, Wiring between terminals of various devices shall be ‘point to point’ (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)Floor mounted panel shall be mounted on Base frame of ISMCchannel size 100 x 50 x 5 mm( to be paid Extra )(g) Tests: The insulation resistance (with 1000 V Megger) and High voltage Power frequency test (by applying a voltage of 2.5KV for one minute) shall be measured between phases, between phase and neutral and between phase and earth. both before and after high voltage power frequency test. The insulation resistance shall not be less than three megaohm. CT Secondary current injection test shall also be carried out.(h) only outer surface area on all sides shall be measured & panel to be fabricated only from CPRI approved fabricator only (CPRI Test certificates to be submitted)All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR . 276 SITC of3 /4pole current limiting Moulded case circuit breaker (MCCB) made of flame retardent & heat resistant materialhaving following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings , conforming to IS/IEC 60947 P -2 :2003 with frontface and centralised adjustable, trip free mechanisum, true contact position indicator,line load interchangeability,designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree,pollution degree 3, having positive isolation capability, push(test) to trip, trip time less then 10 ms under s/c condition, Breaking capacity Ics = 100% Icu. U imp =8 KV, rated insulation voltage690 V.provision for UVR , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connectionsetc. as required.OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR4 pole MCCB With Thermal Magnetic release160 Amp , 25 kA, adjustable O/L & adjustable S/C setting, 277 up to 100 Amp , 10 kA, fixed O/L & fixed S/C setting 278 Supply and fixing of following accessories for Moulded case circuit breaker (MCCB)compatible to main MCCB OEM as per PWD specification for electrical Works, conforming to IS/IEC 60947 P - 2 :2003 including making connection etc complete in all respect. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test certificate before execution.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .Shunt Trip Release 279 Under Voltage Release 280 Extended Rotary Handle 281 Auxiliary contact 282 Spreaders for 250A, 4 Pole MCCB 283 Spreaders upto 125A, 3 Pole MCCB 284 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRSingle pole MCB (With B/C curve tripping Characteristics) 0.5 A to 5 A rating 285 Providing & Fixing of ISO certified company made Four Pole By pass Change Over Switch conforming to IS:13947(Part 3) : IEC:60947-3-1 and IEC:60947-6-1, Open execution type in the following ratings.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work, refer Annexure A attached with this BSR .100 A 286 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load andsite requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting ofclass 3 as per IEC,minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted inexisting distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections, testing etc. as required. OEM shall have submitNABL / CPRI / ERDA accrediated lab type test reports& All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSRSingle pole MCB (With B/C curve tripping Characteristics) 0.5 A to 5 A rating 287 Double pole MCB(With B/C curve tripping Characteristics) 6 A to 32 A rating 288 Four pole MCB (With B/C curve tripping Characteristics) 6 A to 32 A rating 289 50/63 A rating
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Rajasthan View Result →
29.
Rural Development #10361125 Price Bid
Providing And Fixing Furniture Work At Grampanchayat Kondhapuri Tal Shirur - ROLLING SHUTTER - Supplying and fixing rolling shutters of approved make, made of required size 2325 x 2400 mm M.S. laths with 1.20 mm thick top cover, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters.Rate to include priming coat as well as two coats of enamel paint. 2 With all the panels including central panel of the partition(between 14 feet to 8 feet level)shall be covered with 6mm thick HDMR grade commercial plywood & laminate finish (decorative lazoo sheet ) 3 Glass Door (Size :1800x2400mm ) : Supply and installation of ±12mm Thk toughened glass door with all necessary hardwares such as Floor Springs , Top & Bottom Patch , Handles & Lock etc as required .(Location:Near waitingarea) 4 Providing & fixing solid door to partition made out of1 1/2 flush door finished with specified material. T.W.lipping of door should be finished with melaminepolish of approved shade. The door should be fittedwith 5x1.25 brass hinges to the partition as perdesign & necessary fixtures like door closer,cylindrical locks, door stoppers, tower bolts should befitted on it, vision panel, with necessary hardwareetc. complete as per design. 5 Supplying of Visitors Chair: Ergonomically designed seat to be made of High Resilience polyurethane foam , Density -32 kg/m3 , covered with netted fabric & Back made of metal frame duly covered with netted fabric . The Arm rests are to be made of Polypropylene. Mounted on tubular structure of with chrome plated of 70 gsm.Dimension-80 mm (H) X 600 mm (W) X 600 mm (D). 6 providing &fixing vista or equivalent make roller zebra blinds made up of powder coated channel &other imported components and rayon polyester fabric of approved shade & colour . Blinds should be mounted on partition ,wall using wall mounted or ceiling mounted channels as per requirement . the rate should include 6 month gurantee 7 High resolution 3D printed picture ( from stock) painted on acrylic of choice stretched on wooden frame, hung as required. 8 AT ACTUAL 9 High resolution 3D printed picture ( from stock) painted on acrylic of choice stretched on wooden frame, hung as required. 10 AT ACTUAL 11 Full height partly glazed / solid Partitions.(for member room ) Providing & fixing Full height partition using using 2x 2 size seasoned hard wood sections of approved species for all horizontals and verticals space dat 2 feet c /corpartthere-of,both ways or supporting frame work.All the panel sand on both sides of the partition to be covered with 6 mm thick commercial grade plywood and over that 1mm thick laminate of approved colour and brand to be pasted.Necessary opening smust be made in the frame sections tor un the wires,computer cables wherever necessary. Similarly necessary cuttings to be made in the partition to fix witch boxes of electrical ,telephone sockets,computer Information outlet setc. a With all the panels including central panel of the partition (between 3feet to 7feet level) shall be covered with6 mm thick MR grade commercial plywood & laminatefinish. 12 Providing & fixing at site Door for partly glazed partition,door shall be of 32.0mm Commercial grade flush door with1.0 mm lamination on both the sides,and central portion to have 8.0 mm toughened and flutted glass combinationto be fixed with help of teak wood beadings. All the edges of the door to be covered with 35 x 12mm Teakwood beadings, inside,door stopper strictly as per thegiven design & drawing etc complete. 13 Supplying of Visitors Chair: Ergonomically designed seat to be made of High Resilience polyurethane foam , Density -32 kg/m3 , covered with netted fabric & Back made of metal frame duly covered with netted fabric . The Arm rests are to be made of Polypropylene. Mounted on tubular structure of with chrome plated of 70 gsm.Dimension-80 mm (H) X 600 mm (W) X 600 mm (D). 14 providing &fixing vista or equivalent make roller zebra blinds made up of powder coated channel &other imported components and rayon polyester fabric of approved shade & colour . Blinds should be mounted on partition ,wall using wall mounted or ceiling mounted channels as per requirement . the rate should include 6 month gurantee 15 Full height partly glazed / solid Partitions.(Providing & fixing) Full height partition using using 2x 2 size seasoned hard wood sections of approved species for all horizontals and verticals spacedat 2 feet c /corpartthere-of,both ways or supporting frame work.All the panel sand on both sides of the partition to be covered with 6 mm thick commercial grade plywood and over that 1mm thick laminate of approved colour and brand to be pasted.Necessary opening smust be made in the frame sections tor un the wires,computer cables wherever necessary. Similarly necessary cuttings to be made in the partition to fix witch boxes of electrical ,telephone sockets,computer Information outlet setc. a With all the panels including central panel of the partition (between 3 feet to 7 feet level) shall be covered with6 mm thick MR grade commercial plywood & laminatefinish. 16 With all the panels including central panel of the partition(between 11 feet to 9 feet level)shall be covered with 6mm thick HDMR grade commercial plywood & laminate finish in light laminate and marble sheet with indirect light 17 BHAUSAHEB TABLE :L shaped work station with grommet for wire management & side cabinet . the table of dark and light shade shade with top size 1725 x 750 x 750 mm, thickness of 35 mm, laminated on both sides. with louvers and indirect light 18 side runner with grommet for wire management & side cabinet . the table of dark and light shade shade .The side cabinet of size750 x 375 x750with openable shutters . 19 BHAUSAHEB TABLE : Overhead storage with open shelf . the storage dark and light shade with size 1500 x 375 x 1780 mm, thickness of 35 mm, laminated on both sides. 20 Providing & fixing at site Door for partly glazed partition,door shall be of 32.0mm Commercial grade flush door with1.0 mm lamination on both the sides,and central portion to have 8.0 mm toughened and flutted glass combinationto be fixed with help ofbeadings. All the edges of the door to be covered with 35 x 12mm Teakwood beadings, inside,door stopper strictly as per thegiven design & drawing etc complete. 21 Supplying of Visitors Chair: Ergonomically designed seat to be made of High Resilience polyurethane foam , Density -32 kg/m3 , covered with netted fabric & Back made of metal frame duly covered with netted fabric . The Arm rests are to be made of Polypropylene. Mounted on tubular structure of with chrome plated of 70 gsm.Dimension-80 mm (H) X 600 mm (W) X 600 mm (D). 22 Executive Chair 1-Ergonomically designed executive Chairmade up of fabric finishing withadjustable type head-rest made of PUfoamwithPolypropylene cover at back . Seat made up of 12mm hot pressed plywood with moulded PU Foam , Density 45 kg/m3with size 470 ±10mm (W), 460 ±10mm(D)& 70 ±10mm(T). Back seat with Poly propyleneStructure with Mesh & PUfoamwithPoly propylene cover at back of size 500 ±10mm (w),780 ±10 mm(H). Fixed arm rest made up of poly propylene. Over all dimension shall be 1250mm H X 720 mm W X 720 mm D. Mechanism with Centre Tilt, Seat & Back are fixed together and the whole structure moves together in one direction with Upright position Lock. The under structureof Revolving Pedestal with Chrome plated Steel base with 3 piece bellow. 23 providing &fixing vista or equivalent make roller zebra blinds made up of powder coated channel &other imported components and rayon polyester fabric of approved shade & colour . Blinds should be mounted on partition ,wall using wall mounted or ceiling mounted channels as per requirement . the rate should include 6 month gurantee 24 High resolution 3D printed picture ( from stock) painted on acrylic of choice stretched on wooden frame, hung as required. 25 UP-SARPANCH TABLE :L shaped work station with grommet for wire management & side cabinet . the work station ofdark and light shade.the borderinner table goldern laminate with indirect light. with top size 1725 x 750 x 750 mm, thickness of 35 mm, laminated on both sides 26 side runner with grommet for wire management & side cabinet . the table of dark and light shade shade .The side cabinet of size 900 x 375 x750with openable shutters . 27 Supplying of Visitors Chair: Ergonomically designed seat to be made of High Resilience polyurethane foam , Density -32 kg/m3 , covered with netted fabric & Back made of metal frame duly covered with netted fabric . The Arm rests are to be made of Polypropylene. Mounted on tubular structure of with chrome plated of 70 gsm.Dimension-80 mm (H) X 600 mm (W) X 600 mm (D). 28 Executive Chair 1-Ergonomically designed executive Chairmade up of fabric finishing withadjustable type head-rest made of PUfoamwith Polypropylene cover at back . Seat made up of 12mm hot pressed plywood with moulded PU Foam , Density 45 kg/m3with size 470±10mm (W), 460 ±10mm(D)& 70 ±10mm(T). Back seat with PolypropyleneStructure with Mesh & PUfoamwithPoly propylene cover at back of size 500 ±10mm (w),780 ±10 mm(H). Fixed arm rest made upof poly propylene. Over all dimension shall be 1250mm H X 720 mm W X 720 mm D. Mechanism with Centre Tilt, Seat & Back are fixed together and the whole structure moves together in one direction with Upright position Lock. The under structureof Revolving Pedestal with Chrome plated Steel base with 3 piece bellow. 29 Providing and making Sofa chairs with arms using 1828 x 609 x 900 mm .framing with 19 mm thk marine plywood on top seat to have3x 2 zigzag spring P AND SEAL plywood on top seat to have3x2 zigzag spring with 100 mm th.HDPU foam and 75 mm jute strips for back. Sofa tobe upholstered in cloth for exposed for surface. 30 High resolution 3D printed picture ( from stock) painted on acrylic of choice stretched on wooden frame, hung as required. 31 providing &fixing vista or equivalent make roller zebra blinds made up of powder coated channel &other imported components and rayon polyester fabric of approved shade & colour . Blinds should be mounted on partition ,wall using wall mounted or ceiling mounted channels as per requirement . the rate should include 6 month gurantee 32 With all the panels including central panel of the partition(between 11 feet to 9 feet level)shall be covered with 6mm thick HDMR grade commercial plywood & laminate finish in darklaminate with louvers 33 With all the panels including central panel of the partition(between 2 feet to 6 feet level)shall be covered with 6mm thick HDMR grade commercial plywood & laminate finish in darklaminate& 6 projected ledge with indirect light 34 Providing & fixing at site Door for partly glazed partition,door shall be of 32.0mm Commercial grade flush door with1.0 mm lamination on both the sides,and central portion to have 8.0 mm toughened and flutted glass combinationto be fixed with help of teak wood beadings. All the edges of the door to be covered with 35 x 12mm Teakwood beadings, inside,door stopper strictly as per thegiven design & drawing etc complete. 35 AT ACTUAL 36 SARPANCH TABLE :L shaped work station with grommet for wire management & side cabinet . the work station ofdark and light shade.the borderinner table goldern laminate with indirect light. with top size 1725 x 750 x 750 mm, thickness of 35 mm, laminated on both sides 37 side runner with grommet for wire management & side cabinet . the table of dark and light shade shade .The side cabinet of size 900 x 375 x750with openable shutters 38 Supplying of Visitors Chair: Ergonomically designed seat to be made of High Resilience polyurethane foam , Density -32 kg/m3 , covered with netted fabric & Back made of metal frame duly covered with netted fabric . The Arm rests are to be made of Polypropylene. Mounted on tubular structure of with chrome plated of 70 gsm.Dimension-80 mm (H) X 600 mm (W) X 600 mm (D). 39 Executive Chair 1-Ergonomically designed executive Chairmade up of fabric finishing withadjustable type head-rest made of PUfoamwithPolypropylene cover at back . Seat made up of 12mm hot pressed plywood with moulded PU Foam , Density 45 kg/m3with size 470±10mm (W), 460 ±10mm(D)& 70 ±10mm(T). Back seat with PolypropyleneStructure with Mesh & PUfoamwithPoly propylene coverat back of size 500 ±10mm (w),780 ±10 mm(H). Fixed arm rest made upof poly propylene. Over all dimension shall be 1250mm H X 720 mm W X 720 mm D. Mechanism with Centre Tilt, Seat & Back are fixedtogether and the whole structure moves together in one direction withUpright position Lock. The under structureof Revolving Pedestal with Chrome plated Steel base with 3 piece bellow. 40 Providing and making Sofa chairs with arms using 1828 x 609 x 900 mm .framing with 19 mm thk marine plywood on top seat to have3x 2 zigzag spring P AND SEAL plywood on top seat to have3x2 zigzag spring with 100 mm th.HDPU foam and 75 mm jute strips for back. Sofa tobe upholstered in cloth for exposed for surface. 41 Providing & fixing at site Door for partly glazed partition,door shall be of 32.0mm Commercial grade flush door with1.0 mm lamination on both the sides,and central portion to have 8.0 mm toughened and flutted glass combinationto be fixed with help ofbeadings. All the edges of the door to be covered with 35 x 12mm Teakwood beadings, inside,door stopper strictly as per thegiven design & drawing etc complete. 42 With all the panels including central panel of the partition(between 10 feet to 10 feet level)shall be covered with 6mm thick HDMR grade commercial plywood & laminate finish in darkand light laminatewith indirect light 43 With all the panels including central panel of the partition(between 2 feet to 5 feet level)shall be covered with 6mm thick HDMR grade commercial plywood & laminate finish in darklaminate& 6 projected ledge with indirect light 44 High resolution 3D printed picture ( from stock) painted on acrylic of choice stretched on wooden frame, hung as required. 45 AT ACTUAL 46 Providing Table with keyboard Facility of size 130 x 26x 43 as per design on site in 19 mm thk. Marine plywood frame work with 1 mm thk laminatetable top including 12 mm thk. ply ontable top restedon 3. storage forprovided below the desk as shown in the drg. All the inner surfaces shall be finshed with 1mm thick blue laminate. 47 Providing Table with keyboard Facility of size 117 x 26x 43 as per design on site in 19 mm thk. Marine plywood frame work with 1 mm thk laminatetable top including 12 mm thk. plys ontable top restedon 31 no. storage forprovided below the desk as shown in the drg. All the inner surfaces shall be finshed with 1mm thick blue laminate.A drawer unit as shown in the drg shall be provided. 3 nos of drawers and 3nos of shutter with 1.0 mm.Drawer shall consist of 12mm thk. marine Ply sides, back and 6mm thk. marine Ply base. Facia of drawers shall be of 19mm thk. marine Ply finished in 1.0 mm. Thk. Laminate and with a wooden moulding on top/bottom edge for handle.The inside portion of draws to be finished with white laminate. Rate shall be inclusive of all necessary approved fittings like lockse. 48 Providing and fixing storage units of full/ low height as per drwng. They shall consist of 18mm thk. marine ply top, sides, bottom, open shelves and shutters & 8mm thk marine ply for back.The bottom of the storages shall be at 50 mm from FFL. The shutter with box type higes of approved make & teak lipping finished with melamine with approvedlaminate on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages . All the external surfaces including back shall be finished with 1.0mm thk. Laminate of approved make.18mm thk. marine Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hinges, locks, 150 mm long SS brushed finish handles,tower bolts, and any necessary hardware items. 49 Providing and fixing storage units of full/ low height as per drwng. They shall consist of 18mm thk. marine ply top, sides, bottom, open shelves and shutters & 8mm thk marine ply for back.The bottom of the storages shall be at 50 mm from FFL. The shutter with box type higes of approved make & teak lipping finished with melamine with approvedlaminate on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages . All the external surfaces including back shall be finished with 1.0mm thk. Laminate of approved make.18mm thk. marine Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hinges, locks, 150mm long SS brushed finish handles,tower bolts, and any necessary hardware items. 50 Providing and fixing storage units of full/ low height as per drwng. They shall consist of 18mm thk. marine ply top, sides, bottom, shelves and shutters & 6mm thk marine ply for back.The bottom of the storages shall be at 50 mm from FFL. The shutter with box type higes of approved make & teak lipping finished with melamine with approvedlaminate on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages. All the external surfaces shall be finished with 1.0mm thk. Laminate of approved make.18mm thk. marine Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hinges, locks, 150mm long SS brushed finish handles,tower bolts, and any necessary hardware items. 51 P/F soft board made up of 12 mm. Thk. Soft boardmounted on 12mm thk. Comm. Plywood & wrappedwith cloth of approved colour, shade & quality. Thenotice board shall have 1 1/2 x 1/2 liiping Patti to allsides with polish on it. The notice board shall be fixedon wall &/or partition as per direction. 52 Supplying of Visitors Chair: Ergonomically designed seat to be made of High Resilience polyurethane foam , Density -32 kg/m3 , covered with netted fabric & Back made of metal frame duly covered with netted fabric . The Arm rests are to be made of Polypropylene. Mounted on tubular structure of with chrome plated of 70 gsm.Dimension-80 mm (H) X 600 mm (W) X 600 mm (D). 53 Providing & fixing paneling made up of 12 mm thk.interior grade 1st quality particle board fixed oncolumn/wall. The paneling shall be in line, level &true plumb. The paneling shall be finished withspecified finishing material in approved pattern asdirected by the Banks Engineer. The rate includesnecessary hardware. Width below 75 mm. will not beconsidered for the measurement.All provisions to be made for all electrical,networking, telephone etc. boxes onto paneling atrequired heights/levels with necessary additionalsupports &/or scaffolding as required.The item includes finishing of panelling edges withsame type of finishing. 54 Providing & fixing solid door to partition made out of1 1/2 flush door finished with specified material. T.W.lipping of door should be finished with melaminepolish of approved shade. The door should be fittedwith 5x1.25 brass hinges to the partition as perdesign & necessary fixtures like door closer,cylindrical locks, door stoppers, tower bolts should befitted on it, vision panel, with necessary hardwareetc. complete as per design. 55 Providing & fixing solid paneling made up of 18guage 50 x 25 mm Al section framework at 600 mmc/c both ways; covered with 12 mm thk. interiorgrade 1st quality particle board from one side.Paneling should be finished with specified finishingmaterial as per design. Paneling surface shall besecured to wall &/or column surface using screwsetc. complete as per design.All provisions to be made for all electrical,networking, telephone etc. boxes onto panelingframework at required heights/levels with necessaryadditional supports &/or scaffolding as required. Therate includes all necessary hardware & cleaning ofpaneling to the satisfaction of theEngineeretc. complete 56 Providing & fixing door frame made up of 12 mm thk.interior grade 1st quality particle board fixed onwall. The frame shall be in line, level &true plumb. The frame shall be finished withspecified finishing material in approved pattern asdirected by theEngineer. . Width below 75 mm. will not beconsidered for the measurement. 57 Supplying of Visitors Chair: Ergonomically designed seat to be made of High Resilience polyurethane foam , Density -32 kg/m3 , covered with netted fabric & Back made of metal frame duly covered with netted fabric . The Arm rests are to be made of Polypropylene. Mounted on tubular structure of with chrome plated of 70 gsm.Dimension-80 mm (H) X 600 mm (W) X 600 mm (D). 58 Executive Chair 1-Ergonomically designed executive Chairmade up of fabric finishing withadjustable type head-rest made of PUfoamwithPolypropylene cover at back . Seat made up of 12mm hot pressed plywood with moulded PU Foam , Density 45 kg/m3with size 470 ±10mm (W), 460 ±10mm(D)& 70 ±10mm(T). Back seat with Poly propyleneStructure with Mesh & PUfoamwithPoly propylene cover at back of size 500 ±10mm (w),780 ±10 mm(H). Fixed arm rest made up of poly propylene. Over all dimension shall be 1250mm H X 720 mm W X 720 mm D. Mechanism with Centre Tilt, Seat & Back are fixed together and the whole structure moves together in one direction with Upright position Lock. The under structureof Revolving Pedestal with Chrome plated Steel base with 3 piece bellow. 59 Supply and installation ofStorage Made with ±25mm thick Top prelaminated particle board with 2/ 0.8mm edge banding with ±18mm thk shutters and back panel is made of±9mm thk board . The unit will be having all necessary hardwares such as Hinges , Handles and Lock etc as required .(Size : 1570 x 380 x 558mm ) 60 providing &fixing vista or equivalent make roller zebra blinds made up of powder coated channel &other imported components and rayon polyester fabric of approved shade & colour . Blinds should be mounted on partition ,wall using wall mounted or ceiling mounted channels as per requirement . the rate should include 6 month gurantee 61 High resolution 3D printed picture ( from stock) painted on acrylic of choice stretched on wooden frame, hung as required. 62 AT ACTUAL 63 Providing & fixing solid paneling made up of 18guage 50 x 25 mm Al section framework at 600 mmc/c both ways; covered with 12 mm thk. interiorgrade 1st quality particle board from one side.Paneling should be finished with specified finishingmaterial as per design. Paneling surface shall besecured to wall &/or column surface using screwsetc. complete as per design.All provisions to be made for all electrical,networking, telephone etc. boxes onto panelingframework at required heights/levels with necessaryadditional supports &/or scaffolding as required. Therate includes all necessary hardware & cleaning ofpaneling to the satisfaction of theEngineeretc. complete 64 providing &fixing vista or equivalent make roller zebra blinds made up of powder coated channel &other imported components and rayon polyester fabric of approved shade & colour . Blinds should be mounted on partition ,wall using wall mounted or ceiling mounted channels as per requirement . the rate should include 6 month gurantee 65 Providing & fixing paneling made up of 12 mm thk.interior grade 1st quality particle board fixed oncolumn/wall. The paneling shall be in line, level &true plumb. The paneling shall be finished withspecified finishing material in approved pattern asdirected by the Banks Engineer. The rate includesnecessary hardware. Width below 75 mm. will not beconsidered for the measurement.All provisions to be made for all electrical,networking, telephone etc. boxes onto paneling atrequired heights/levels with necessary additionalsupports &/or scaffolding as required.The item includes finishing of panelling edges withsame type of finishing. 66 Providing & fixing the conference table with 18 mmthick plywood structure and finished with laminate ofapproved texture on exposed surface and melaminepolish (glosy/matt) with all accessories amd provisionfor elctrical, networking, telephone, etc, cut out forpop-up and all necessary hardware edges of topshall be covered with 2nd class BT wood and finishedwith melamine polish, etc. all as per direction of Engineer. 67 providing and fixing molding of 20mm thk pvc made or mdf as per selection 68 Supplying of Visitors Chair: Ergonomically designed seat to be made of High Resilience polyurethane foam , Density -32 kg/m3 , covered with netted fabric & Back made of metal frame duly covered with netted fabric . The Arm rests are to be made of Polypropylene. Mounted on tubular structure of with chrome plated of 70 gsm.Dimension-80 mm (H) X 600 mm (W) X 600 mm (D). 69 High resolution 3D printed picture ( from stock) painted on acrylic of choice stretched on wooden frame, hung as required. 70 AT ACTUAL 71 Providing & fixing suspended false ceiling consistingof 12.5mm. thk. Gypsum boards suspended on G.I.framework to consists of G.I. perimeter channels0.55mm thk.x20mm.x30mm. along the perimeter offalse ceiling; screw fixed to wall/partition with nylonsleeves & screws @ 600mm. c/c. Suspending GI.Intermediate channels of size 0.9mmthk.x45mmx15mm. from the soffit at max. distance1220mm. c/c with ceiling angle 0.55mm. thk.x25mm.x10mm. Fixed to soffit using proprietarysupplied GI. Cleats & steel expansion fasteners. Ceiling section 0.55mm thk. web size 51.5mm &flanges 26mm. Each & 10.5 mm. lips fixedperpendicular to intermediate channel at 457mm.c/c. using connecting clips. Gypsum board is screw fixed to ceiling section with 25mm. drywall screws at 230mm. c/c. boards to befinished with proprietary supplied jointing tape &jointing compound & sand papered to achieve asmooth finish etc. complete or as per directions. 72 1 Light Point for fixture_Primary . Providing 12Wspot light 73 POLYCAB OR FINOLEX WIRE. LEGRAND OR ANCHOR SWITCHES. DIAMOND CONCEALED PIPE. THIS INCLUDE MATERIAL AND LABOUR FOR COMPLETE WIRING AND FITTING EXCEPT FOR GEYSERS,CHANDELIER,HANGING LIGHTS AND INVERTOR,INCLUDING LED STRIP AND PROFILE 74 1.30X80 (2 NOS) -482. 26X80 (2 NOS) -40 75 AT ACTUAL 76 AT ACTUAL 77 ROUAND OFF
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
30.
Power #10341226 Price Bid
Tender for Rate Contract For Supply & Installation Of Peripherals For Computer, Printer, Cctv And Networking Equipments, Repairing Of Computers & Printers, Cctv And Toner Refilling In Various Type Of Printers For Offices Situated Under Mpmkvvcl Rajgarh. , Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: General Manager O&M Circle Rajgarh Name Of Work: Rate Contract For Supply & Installation Of Peripherals For Computer, Printer, Cctv And Networking EquipmentS, Repairing Of Computers & Printers, Cctv And Toner Refilling In Various Type Of Printers For Offices Situated Under Mpmkvvcl Rajgarh. Contract No: 6232913900 Name Of The Bidder/ Bidding Firm / Company : Price Schedule (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Name Of Part With Specification Make / Model Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder With Gst Rs. P Excise Duty Vat Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Without Taxes Total Amount With Taxes Total Amount In Words , Computer/Pc/Desktop , Ram 4Gb Ddr3 , Ram 8Gb Ddr3 , Ram 4Gb Ddr4 , Ram 8Gb Ddr4 , Hard Disk 1Tb Sata , Hard Disk 2Tb Sata , Hard Disk Ssd 128Gb Sata , Hard Disk Ssd 256Gb Sata , Hard Disk Ssd 512Gb Sata , Hard Disk Nvme 128Gb , Hard Disk Nvme 256Gb , Hard Disk Nvme 512Gb , Pci Sata Card , Processor Fan I3/I5/I7/I9 , Smps 500W And 650W , Power Cable 1.5M , Power Cable 3M , Vga Cable 1.5M , Vga Cable 3M , Hdmi Cable 1.5M , Hdmi Cable 3M , Hdmi Cable 15M , Keyboard Usb , Mouse Usb , Keyboard + Mouse Combo Usb , Keyboard + Mouse Combo Wirless , Mouse Wirless , Atx Cabinet With Smps , Mother Board Reparing , New Mother Board Lga1150 , New Mother Board Lga1151 , Processor I3 3Rd Gen 2.6 Ghz And Above , Processor I3 7Th Gen 2.6 Ghz And Above , Processor I5 3Rd Gen 2.6 Ghz And Above , Processor I5 7Th Gen 2.6 Ghz And Above , Led Monitor 20 Lg/Samsung/Hp/Dell/Acer/ Zebronics/Lapcare/Frontech , Led Monitor 22 Lg/Samsung/Hp/Dell/Acer/ Zebronics/Lapcare/Frontech , Led Panel Replacement 20,22 , Tft Monitor Power Supply Circuit Reparing , Tft Monitor Display Unit Reparing , Tft Monitor Display Card Reparing , Tft Monitor Display Reparing And Servicing , Hard Disk Sata Cable , Hard Disk Sata Power Cable , All In One Pc Repairing , All In One Pc Power Adopter , All In One Pc Power Mother Board Reparing , All In One Pc Servicing , Led Monitor Power Adopter , Type-B/C Cable , Usb Lan Card , Usb Wifi Card , Usb Com Port Connector , Mouse Pad , Cmos Battery , Usb Hub (4 Port) , Formating Servicing Of Computer And Relevent Software Installation , Laser Printer And Its Accessories , Opc Drum , Logic Card , Pcr Roller , Chip Replacment , Bullet For Printer Cartridge , Doctor Blade , Wiper Blade , Magnet Roller , Toner Powder , Refilling Charge , Pressure Roller , Teflon Paper , Fuser Unit , Engine Control Card , Relay , Moter , Paper Senser , Gear Assembly , Paper Pickup Assemble , Power Supply Card Reparing , Power Supply Card , Networ Card , Cartridge Senssor , Scanner Unit , Scanner Cable , Screen Panel , Laser Unit For Photocopy , Paper Try , Printer New Carrtidge Hp 1020 , Printer New Carrtidge Hp 1505N , Printer New Carrtidge Hp P-1108 , Printer New Carrtidge Cannon 2900 , Printer New Carrtidge Hp P-1015 D , Printer New Carrtidge Hp 1007 , Printer New Carrtidge Canon 6030,6030B , Printer Complete Base , Printer Servicing , Opc Drum , Logic Card , Pcr Roller , Chip Replacment , Bullet For Printer Cartridge , Doctor Blade , Wiper Blade , Magnet Roller , Toner Powder , Refilling Charge , Pressure Roller , Teflon Paper , Fuser Unit , Engine Control Card , Relay , Moter , Paper Senser , Gear Assembly , Paper Pickup Assemble , Power Supply Card Reparing , Power Supply Card , Network Card , Cartridge Senssor , Scanner Unit , Scanner Cable , Screen Panel , Laser Unit For Photocopy , Paper Tray , Printer Servicing , Printer New Carrtidge Canon Mf244 , Printer New Carrtidge Hp 3015Dn , Printer New Carrtidge Hp P-2015Dn , Printer New Carrtidge Hp-274Dn , Printer Complete Base , Opc Drum , Logic Card , Pcr Roller , Chip Replacment , Bullet For Printer Cartridge , Doctor Blade , Wiper Blade , Magnet Roller , Toner Powder , Refilling Charge , Pressure Roller , Teflon Paper , Fuser Unit , Engine Control Card , Relay , Moter , Paper Senser , Gear Assembly , Paper Pickup Assemble , Power Supply Card Reparing , Power Supply Card , Networ Card , Cartridge Senssor , Scanner Unit , Scanner Cable , Screen Panel , Laser Unit For Photocopy , Paper Try , Printer New Carrtidge Hp Mfp-128 , Printer New Carrtidge Hp M208dw , Printer New Carrtidge Hp M329dw , Printer New Carrtidge Hp 403Dn , Printer New Carrtidge Hp Mfp-128 , Printer New Carrtidge Hp Mfp-1188A/1136 , Printer Servicing , Hp 1020 Plus Laserjet New Printer , Canon 2900 Laserjet New Printer , Printer Complete Base , Opc Drum , Logic Card , Pcr Roller , Chip Replacment , Bullet For Printer Cartridge , Doctor Blade , Wiper Blade , Magnet Roller , Toner Powder , Refilling Charge , Pressure Roller , Teflon Paper , Fuser Unit , Engine Control Card , Relay , Moter , Paper Senser , Gear Assembly , Paper Pickup Assemble , Power Supply Card Reparing , Power Supply Card , Networ Card , Cartridge Senssor , Scanner Unit , Scanner Cable , Screen Panel , Laser Unit For Photocopy , Paper Try , Printer New Carrtidge Brother Hl B2000d , Printer New Carrtidge Brother Hl Hl2310 , Printer New Carrtidge Brother Hl D7535dw , Printer Servicing , Printer Complete Base , Opc Drum , Logic Card , Pcr Roller , Chip Replacment , Bullet For Printer Cartridge , Doctor Blade , Wiper Blade , Magnet Roller , Toner Powder , Refilling Charge , Pressure Roller , Teflon Paper , Fuser Unit , Engine Control Card , Relay , Motar All Type , Paper Senser , Gear Assembly , Paper Pickup Assemble , Power Supply Card Reparing , Power Supply Card , Networ Card , Cartridge Senssor , Scanner Unit , Scanner Cable , Toner Reset Chip , Toner Powder , Drum Cleaning Blade , Main Pc Board , Friction Pad , 250-Sheet Paper Tray/Stand , Drum/Developer Units , Toner Cartiage , Screen Panel , Laser Unit For Photocopy , Paper Try , Printer Complete Base , Imaging Drum Unit , Adf Pick Roller Assembly , Printer Servicing , Printer Complete Base , Ups & Accessories , Transformer Charging Isolated 12 V Ac , Ups Charging Unit , Pcg Logic Card 650 Va/850 Va , Mosfet Regulator Component , Logic Card Repairing , Battery 12 V, 7 Ah Smf , Battery 12 V, 18 Ah Smf , Battery 12 V, 12 Ah Smf , Battery 12 V, 24 Ah Smf , New Ups 600 Va With Power Protection , New Ups 1000 Va With Power Protection , Miscellaneous Items , Thermoal Printer Power Cable , Thermoal Printer Paper Roll , Thermoal Printer Servcing , Pos Machine Power Adapter , Pos Machine Battery For Mosambee Mf 919 (7.4V/7500Mah) , Pos Machine Battery For Mosambee P10 7500 Mah , 68 Watt Charging Adapter , Otg Type B/Type C , Usb Wifi Dongle , Voltage Stablilizer For Pc 1Kva/1Kw , Voltage Stabilizer Servicing Charge , Usb Port To Micro Usb Data Cable , Usb A/B Cable (Printer Usb) , Usb Male - Female Extension , Usb To Ethernet Cable , Usb Printer Cable , Usb Male-Female Cable , Usb To Eternet Cable , Vga To Hdmi Convertor , Hdmi To Vga Convertor , Vga To Com Port Convertor , Usb To Com Port Convertor , Hdmi Cable For Projector 15 Mtr , Vga Cable For Projector 15 Mtr , Speaker Wireless 8W Portable (Ac) , Speaker With Usb Power , Pen Drive 3.0 64Gb , Pen Drive 3.0 128Gb , Hard Disk Usb Extenal 1Tb , Hard Disk Usb Extenal 2Tb , Air Blower 500 Watt , Spike 5 Socket With 5 Meter Power Cable , Quick Heal Antivirus (1 Year License Single User) , Quick Heal Antivirus (1 Year License Multi User) , Quick Heal Antivirus (3 Years License Single User) , External Hdd Usb (1 Tb) , Servicing Charge For Projector , Servicing Charge For Hdd Data Recover , Servicing Charge For Ssd Data Recover , Memory Card ,64/128 , Tv 43 Inch And Above With Stand And Projecotr For Semniar And Meeing At Rent , Screw Driver Kit Set Multipurpose Use , Scanner , Fuser Rod , Gear Assembly , Power Adopter , Sensor , Usb Cable , Service Charge For Repair , Cannon Lide 120 New Scanner , Networking Equipments , Switch 5 Port 10/100 Mbps Fast Ethernet Switch , Switch 8 Port 10/100 Mbps Fast Ethernet Switch , Switch 16 Port 10/100 Mbps Fast Ethernet Switch , Power Adapter 5V For 8/16/24 Port Lan Switch , Supply Of Rj 45 Connector (Each) , Supply Of Rj 45 Connector & Creamping It (Each) , Supply Of Stp Cable Drum 305 Meter , Supply Of Cat6 Cable (Per Meter) , Lan Tester With Battery , Cremping Tool , Installation Of Box New With Keystone Jack , Installation Of Box Repairing Charge , New Media Convertor Single Mode , Wifi Router Adsl2 4 Port , Repairing Of Power Supply Circuit Of Cisco Router 4200,3600,1800 Series , Cisco Router 4200 Series Power Adapter , Cisco Router 3600,1800 Series Power Cable , Repairing Of Power Supply Circuit Of Cisco Switch 2100,2200 Series , Cisco Switch 2100,2200 Series Power Adapter , Cisco Router And Switch Power Cable , Optical Fiber Splicing With Box , Optical Fiber Termination , Optical Fiber Splicing , Lan Connectivity Error Resolution The At Site , Rj 45 Connector(100 Pieces) , 2 Mtr Patch Cord(D-Link) , 5 Mtr Patch Cord(D-Link) , Other Items , Laptop Key Board , Touch Pad , Laptop Screen , Ram Ddr 3 (4 Gb) , Ram Ddr 4 (4 Gb) , Ssd (M.2, Nvme) 256 Gb , Hard Disk 1 Tb , Battery Of Laptop , Laptop Mohterboad Repairing , Mother Board , Laptop Charger , Service Charge , Video Conferencing System Model-Scopia Xt5000 Series , Power Adapter 12V , New Remote , Radvision Microphone Device Pod Hi-Band , Cctv Cameras Item , Camera 2.4 Mp Bullet , Camera 2.4 Mp Dom , Wi-Fi Camera 2.4 Mp , Web Camera 2.4 Mp , Dc Pin (Each) , Bnc Connector Each , Cctv Camera Installation Charege , Hard Disk 1Tb Survilance , Hard Disk 2Tb Survilance , Dvr 4 Channel , Dvr 8 Channel , Nvr 4 Channel , Nvr 8 Channel , Power Adapter 12V , Power Supply 4/8/16 Channel , 3+1 Copper Cable (Per Meter) , Power Supply 8 Channel , Power Supply 16 Channel , Poe Switch 4 Port , Poe Switch 8 Port , Service Call For Cctv (Each) , Poe Switch 16 Port , Cctv Pvc Square Junction Box , Dvr Mouting Rack With Spike , Cctv Installation Charges , Cctv Servicing Charge Per Camera , Other Accessories Items Total In Figures 0.0 0.0 Inr Zero Only Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
31.
Power #10300681 Price Bid
Tender For Rate Contract For Supply, Installation Of Peripherals For Computer, Printer And Networking Equipment Repairing Of Computers, Printers And Toner Refilling In Various Type Of Printers For Offices Situated Under Oandm Circle, Mpmkvvcl Bhind - 1 COMPUTER/PC/Desktop (HP, ACER , IBM , COMPAQ , HCL , HCL Infinity, Lenovo, Dell) 2 RAM (SD RAM 512 MB) 3 RAM (DDR-1 RAM 512 MB) 4 RAM (DDR-1 RAM 1 GB) 5 RAM (DDR-2 RAM 512 MB) 6 RAM (DDR-2 RAM 1 GB) 7 RAM (DDR-2 RAM 2 GB) 8 RAM (DDR-3 RAM 1 GB) 9 RAM (DDR-3 RAM 2 GB) 10 RAM (DDR-3 RAM 4 GB) 11 RAM (DDR-4 RAM 4 GB) 12 RAM (DDR-4 RAM 8 GB) 13 Hard Disc (USB External 1 TB) (Segate/Hitachi/Toshiba/Sony/WD) 14 Hard Disc (SATA 1 TB) (Segate/Hitachi/Toshiba) 15 Hard Disc (SATA 500 GB) (Segate/Hitachi/Toshiba) 16 Hard Disc (SATA 160 GB) (Segate/Hitachi/Toshiba) 17 Hard Disc (SATA 320 GB) (Segate/Hitachi/Toshiba) 18 SSD 1 TB (segate/hitachi/tosiba) 19 SSD 500 GB(segate/hitachi/toshiba) 20 IDE HDD 80 GB 21 IDE HDD 160 GB 22 IDE HDD 320 GB 23 PCI SATA CARD 24 Processor fan (for Core 2 Duo) 25 Processor fan (P-IV ) 26 Processor fan (for Core i3 and above) 27 SMPS 500W (Intex/Frontech/Zebronic/Enter) 28 SMPS Repairing 29 Graphic Card (2 GB) 30 PCI VGA Display Card (8 MB/16 MB) 31 PCI LAN CARD 32 Power Cable 33 VGA cable 34 Keyboard+MOUSE COMBO(Logitech/Hp/DELL) 35 Wireless Keyboard+MOUSE COMBO(Logitech/Hp/DELL) 36 Key Board (Logitech/Hp/DELL/I-Ball) 37 Mouse (Logitech/Hp/DELL/I-Ball) 38 Formating servicing of Computer Re-Installation of OS and relevent software 39 ATX Cabinet with SMPS 40 ATX Cabinet without SMPS 41 DVD writer SATA (LG/DELL/SAMSUNG/LIOTON) 42 Mother Board repairing 43 Replacement of Mother Board DG 31 44 Replacement of Mother Board DG 41 45 Replacement of Mother Board DG61 46 Replacement of Mother Board DG81 47 Replacement of Mother Board DG100 Series 48 Replacement of Mother Board DG 965 49 Processor Intel Dual Core 2.6 GHz or Higher 50 Processor Intel Core i3 2.6 GHz or Higher 51 Servicing and Repairing of TFT Monitor (Damaged not included) 52 Servicing and Repairing of CRT Monitor (Damaged not included) 53 LCD/LED 15/15.5/16 LG/SAMSUNG/HP/DELL/ACER 54 LCD/LED TFT 18.5/19.5LG/SAMSUNG/HP/DELL/ACER 55 TFT 18.5/18.5/19.5LG/SAMSUNG/HP/ DELL/ACER 56 LCD/LED TFT 20LG/SAMSUNG/HP/DELL/ACER 57 TFT 20 LG/SAMSUNG/HP/DELL/ACER 58 CRT Monitor Reparing (Power Supply Circuit) 59 CRT Monitor Reparing (Display Unit) 60 TFT Monitor Reparing (Power Supply Circuit) 61 TFT Monitor Reparing (Display Unit) 62 HDD Cable IDE 63 HDD Cable SATA 64 SATA Power connector 65 CMOS BATTERY 66 LASER PRINTER AND ITS ACCESSORIES (HP, SAMSUNG, EPSON, CANON,RICOH SP210, HP Laserjet P3015) 67 OPC Drum 68 Network Card 69 PCR Roller 70 Chip Replacement 71 Bullet for Printer Cartridge 72 Doctor Blade 73 Wiper Blade 74 Refilling of Toner (Formajet/Jet Black) 75 Repairing of FAX THERMEL/LASER FAX 76 Repairing of LASER FAX 77 TEFLON paper for Laser Printer 78 Pressure Roller 79 Fuser Unit 80 Gear Assembly 81 Paper pickup Assembly 82 Power Supply Card 83 Logic Card 84 Cartridge Senssor 85 Scanner Unit for Laser Printer 86 Magnetic Rod 87 OPC Drum 88 PCR Roller 89 Chip Replacement 90 Wiper Blade 91 Doctor Blade 92 Refilling of Toner (RICOH) 93 OPC Drum 94 PCR Roller 95 Chip Replacement 96 Wiper Blade 97 Doctor Blade 98 Refilling of Toner (RICOH) 99 DOT MATRIX PRINTER & ACCESSORIES (TVS, EPSON,Wipro and other compatible printers) 100 Print Head for 9 Pin 101 Print Head for 24 Pin 102 Print Head Cable for 9 Pin 103 Print Head Cable for 24 Pin 104 RD Assembly 105 Paper Sensor 106 Home Sensor 107 Paper Feed Gear 108 Paper Feed Motor 109 LF Motor 110 Printer Servicing 111 Head Mask 112 Printer Head Repair Per Pin 113 Carriage Belt 114 Carriage Rail 115 Carriage Motor 116 COLOR LASER PRINTER & ACCESSORIES (HP) 117 Network Card 118 Printer USB cable 119 Refilling Charges per Catridge 120 Power Supply adopter 121 TEFLON 122 Pressure Roller 123 Fuser Unit 124 Gear Assembly 125 Paper pickup Assembly 126 Fuser Fill 127 OPC Drum 128 PCR Roller 129 Chip Replacement 130 Wiper Blade 131 Printer Servicing 132 Scanner Unit 133 Power Supply Unit 134 Logic Card 135 Magnetic Rod 136 UPS & ACCESSORIES (Samtek, Libert ITON,Microtek, Unline, Umax, Iball , Power etc (0.5 to 1 KVA) 137 Transformer charging isolated 12 V AC 138 UPS Charging Unit 139 PCG logic card 600 VA/800 VA 140 MOSFET regulator component 141 Logic Card Repairing 142 Battery 12 V, 7 AH SMF 143 Battery 12 V, 18 AH SMF 144 Battery 12 V, 12 AH SMF 145 Battery 12 V, 21 AH SMF 146 Battery 12 V, 24 AH SMF 147 Battery 12 V, 27 AH SMF 148 Battery 12 V, 65 AH SMF 149 NETWORKING EQUIPMENTS AND CABLING (D-link/TYCO/DAX/ Netgear/TENDA/TP-LINK, Networking Equipment) 150 5 port 10/100 mbps fast ethernet switch 151 8 port 10/100 mbps fast ethernet switch 152 16 port 10/100 mbps fast ethernet switch 153 Switch Repairing 154 Power Adapter 155 Supply of RJ 45 connector (each) 156 Supply of CAT6 STP cable (in meter) 157 Supply of CAT6 UTP cable (in meter) 158 Supply of RJ 45 connector & creamping it (each) 159 Lan Card PCI 10/100 MBPS 160 USB Lan Card PCI 10/100 MBPS 161 Power Adaper for 8/16/24 Port Lan switch 162 Media Converter/Modem Power Adapter 5V 1.5 Amp./1.0 Amp. 163 OFC Media Converter Single mode(Dlink, Net Axcess, TP-Link, Netlink, Netgear, Tenda) 164 Wi-Fi Router ADSL2 4-Port 165 Lan connectivity error resolution 166 Wifi usb Adapter for PC Sets((Dlink, Net Axcess, TP-Link, Netlink, Netgear, Tenda)) 167 Repair of power supply circuit of Switch 168 CARTRIDGE FOR COLOR Printer (Cartridge Make HP/Samsung) ( Model No.HP 7000 Officejet Wide, Model No. HP 8000 Officejet) 169 BLACK CARTRIDGE 170 C/M/Y EACH CARTRIDGE 171 BLACK CARTRIDGE 172 C/M/Y EACH CARTRIDGE 173 CARTRIDGE for LINE MATRIX PRINTER (LIPI 6050,6306, 6810 & WIPRO PRINTONIX P500) ( Model No . LIPI 6050, Model No . LIPI 6306/6810, Model No. LIPI 6800/6600 chip based, Model No . WEP PRINTONIX P500, Model No . WEP PRINTONIX P1000) 174 CARTRIDGE FOR LIPI 6050 175 RIBBON BLACK 42 meter 176 CARTRIDGE FOR LIPI 6306/6810 177 RIBBON BLACK 60 meter 178 Cartridge Chip Based 179 RIBBON SPOOL FOR WIPRO PRINTONIX P500 180 RIBBON BLACK 181 RIBBON SPOOL FOR WIPRO PRINTONIX P500 182 RIBBON BLACK 183 CARTRIDGE for DOT MATRIX PRINTER (WEP, EPSON LQ1150, TVS MSP 245,345, Pro X900) (Model No . Wipro Dot Matrix 1070+, Model No . TVS MSP 245, Model No . TVS 250, Model No . TVS MSP 345, Model No . TVS Pro X900, Model No . EPSON LQ 1150 184 CARTRIDGE 185 RIBBON ONLY 186 CARTRIDGE 187 RIBBON ONLY 188 CARTRIDGE 189 RIBBON ONLY 190 CARTRIDGE 191 RIBBON ONLY 192 CARTRIDGE 193 RIBBON ONLY 194 CARTRIDGE 195 RIBBON ONLY 196 CARTRIDGE for Laser/Inkjet Printer (Cartridge Make HP/Samsung/EPSON/Canon) [ Model No . Samsung,ML2851 ND,Model No . Samsung ML-2570,Model No . Samsung 2571,Model No . Canon LBP 300, Model No . Canon LBP2902, Model No . Canon LBP 1210, Model No . Canon LBP 1018, Model No . HP 1505n, Model No . HP 1000, Model No . HP 1007, Model No . HP 1018, Model No . HP 1022N, Model No . HP 2015, Model No . HP 1160, Model No . HP 1200, Model No . HP 3030, Model No . HP 3055, Model No . HP 3050, Model No . HP P3015 Network Printer, Model No. HP Laser Jet 1020 plus,Brother, Model No. HP Laser Jet 1136, HP LASEJET208 , Model No. Epson ACULASER 1400M, Model No. Richo SP-210 197 CARTRIDGE FOR LASER PRINTER 198 Paper Tray 199 CARTRIDGE FOR LASER PRINTER 200 Paper Tray 201 CARTRIDGE FOR LASER PRINTER 202 Paper Tray 203 CARTRIDGE FOR LASER PRINTER 204 Paper Tray 205 CARTRIDGE FOR LASER PRINTER(JETBLACK/PRODOT) 206 Paper Tray 207 CARTRIDGE FOR LASER PRINTER 208 Paper Tray 209 CARTRIDGE FOR LASER PRINTER 210 Paper Tray 211 CARTRIDGE FOR LASER PRINTER 212 Paper Tray 213 CARTRIDGE FOR LASER PRINTER 214 Paper Tray 215 CARTRIDGE FOR LASER PRINTER 216 Paper Tray 217 CARTRIDGE FOR LASER PRINTER 218 Paper Tray 219 CARTRIDGE FOR LASER PRINTER 220 Paper Tray 221 CARTRIDGE FOR LASER PRINTER 222 Paper Tray 223 CARTRIDGE FOR LASER PRINTER 224 Paper Tray 225 CARTRIDGE FOR LASER PRINTER 226 Paper Tray 227 CARTRIDGE FOR LASER PRINTER 228 Paper Tray 229 CARTRIDGE FOR LASER PRINTER 230 Paper Tray 231 CARTRIDGE FOR LASER PRINTER 232 Paper Tray 233 CARTRIDGE FOR LASER PRINTER 234 Paper Tray 235 CARTRIDGE FOR LASER PRINTER 236 Paper Tray 237 COMFARTABLE CARTRIDGE 238 CARTRIDGE RIFILLING (JET BLACK IDTL) 239 CARTRIDGE FOR LASER PRINTER 240 Paper Tray 241 CARTRIDGE FOR LASER PRINTER 242 Paper Tray 243 TEFLON 244 POWER CARD 245 LOGIC CARD 246 CAMFARTABLE CATRIDGE(JET BLACK/PRODOT) 247 PRESSOR ROLLER 248 DRUM 249 CARTRIDGE RIFILLING 250 FUSER UNIT 251 CARTRIDGE FOR LASER PRINTER 252 Paper Tray 253 CARTRIDGE FOR LASER PRINTER 254 Paper Tray 255 MISCELLANEOUS ITEMS [ Segate/TOSHIBA/WESTERN DIGITAL,SAMSUNG/LG/HP/DELL, Vguard/Su-Kam/Havells, USB DATA CABLE, Anchor/Orpat, Sony/Moser baer, Quickheal Server Edition 256 500 GB EXTERNAL HDD 257 1 TB EXTERNAL HDD 258 2 TB EXTERNAL HDD 259 External DVD writer 260 VGA Cable for Projector 15 mtr 261 Servicing Charge for Projector 262 Servicing charge for Data Recover 263 Voltage stablilizer for PC 1KVA/1KW 264 Voltage Stabilizer Servicing Charge 265 USB PORT TO MICRO USB DATA CABLE 266 OGT USB Type B and C 267 USB to Ethernet LAN Convertor 268 USB to COM Port Cable 269 Spike 5 socket with 5 Meter power cable 270 Blank DVD Pack of 25 271 Blank CD Pack of 25 272 Blank DVD Pack of 50 273 Blank CD Pack of 50 274 Server Antivirus for 1 Year 275 Laptop parts forHP, ACER , IBM , COMPAQ , Dell, Lenovo, Wipro, HCL [HP COMPAQ 8510P, HP COMPAQ 6710B, HP PROBOOK 4510S, Dell Vostro 1015] 276 Laptop Key Board 277 Mouse Pad 278 Laptop Screen 279 RAM DDR 1 (1 GB) 280 RAM DDR 2 (1 GB) 281 CD / DVD / Writter IDE. 282 CD / DVD / Writter SATA 283 Hard Disk500 GB 284 Hard Disk 1 TB 285 Battery of Laptop 286 Mother Board 287 Laptop Charger 288 Service Charge 289 Laptop Bag 290 SCANNER [EPSON GT 1500/Canon Lide Series, CANNON MF244 LASER JET PRINTER , ACER ALL IN ONE PC 291 Belt 292 Unit 293 Fuser rod 294 Gear Assembly 295 Sensor 296 Service Charge for repair 297 RIFFILING TONER (PRODOT/IDTL) 298 new cartridge canon 299 PRESSOR ROLLER 300 TEFLON 301 FUSER UNIT 302 LOGIC CARD 303 POWER CARD 304 Scanner Unit 305 CANRTOLAR CARD 306 POWERADPTOR (ACER) 307 PANAL NEW 308 1TB SSD 309 500 GBHDD (ACER ALL IN ONE PC) 310 500 GB SSD (ACER ALL IN ONE PC) 311 RAM DD44GB( ACER ALL IN ONE PC) 312 RAM 8GB DD4 (ACER ALL IN ONE PC) 313 TB HDD (ACER ALL IN ONE PC)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 4
Madhya Pradesh View Result →
32.
Science and Technology #10289313 Price Bid
Ncamc Of It Hardware, Networking System And Access Control Component Of Integrated Functional Computerised Ticketing System With Access Control And Parking Management System At Science City, Kolkata
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
West Bengal View Result →
33.
Housing Urban and Rular Development #10278090 Price Bid
Providing Active Networking Components Of Cisco Make For Lan / Wan With 5 Years License And Onsite Support At Scanning And Digitization Centre At First Floor Of Cto Building, Fort, Mumbai 32
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Maharashtra View Result →
34.
Public Administrative Department #10226673 Price Bid
Supply, Installation And Commissioning Of Machines, Tools And Equipment For New Age Courses In Itis Of Jharkhand Selection Of Agency For Supply, Installation And Commissioning Of Machines, Tools And Equipment For New Age Courses In Itis Of Jharkhand , A. General Tools , Pliers , Soldering Station , Multi Meter , Tweezers , Binoculars , Anemometer , Magnifier , B. List Of Equipment , Unassembled Drone , Electricity Lab , Smd Technology Kit With Wall Chart , Multiple Output Dc Regulated Power Supply , Dc Regulated Variable Programmable Dc Power Supply , Smart Smd Tweezer Handheld , 1 Mhz Mixed Signal Oscilloscope ( 4 Analog + 16 Digital Channel) , 25 Mhz Arbitrary Waveform Generator With Digital Display For Frequency And Amplitude , Handheld 3 3/4 Digit Multimeter , 3Ghz Spectrum Analyzer With Built-In Tracking Generator , Smd Soldering & De Soldering Station With Necessary Accessories , Or Drone Workbench , Analog-Digital Circuits Development Platform , Applied Mechanics Training Platform , Drone Battery Management Training Systems , Charge Controller Training System , Bldc (Brushless Dc) Motor Training System , Inverted Pendulum , Drone Sensor Trainer Kit , Antenna Training System , Advanced Microwave Integrated Circuit Lab , Gps Training Platform , Wireless Communication Modules , Fcb And Esc Training Platform , Drone Gimbal Set With Motor And Control , Npnt Compliant Micro Uav Built For Mapping And Surveillance. , Hd Payload , Thermal Camera Payload , Field Repair Kits , Drones And Spare Parts Kit , Balance Charger , Power Distribution Board , Laptop Latest Configuration , Thrust Measurement Meter , Indoor Netted Facility , Outdoor Controlled Netted Testing Facility , Different Types Of Electronic And Electrical Cables, Connectors, Sockets, Terminations, Different Types Of Analog Electronic Components, Digital Ics. , 3D Printer , Drone Upto 18Km , A. Trainees Tool Kit (Foradditional Unit Trainees Tool Kit Sl. 1-12 Is Required Additionally) , Connecting Screwdriver , Neon Tester 500 V. , Screwdriver , Insulated Combination Pliers , Insulated Side Cutting Pliers , Long Nose Pliers , Soldering Iron , Electrician Knife , Tweezers , Digital Multimeter With 4000 Counts, Large Display With Auto/Manual And Can Measure Dcv- 1000V-Acv-750V, Dc & Ac A(Minimum) – 10A, Resistance (Minimum) 40M?, Capacitance Minimum 20?F, Capacitance And Frequency (Minimum)– 3 Mhz , Soldering Iron Changeable Bits , De- Soldering Pump Electrical Heated, Manual Operators , B. Shop Tools, Instruments – For 2 (1+1) Units No Additional Items Are Required , Steel Rule Graduated Both In Metric And English Unit , Precisionof Screw Drivers , Tweezers – Bend Tip , Steel Measuring Tape , Tools Makers Vice , Tools Maker Vice , Crimping Tool (Pliers) , Magneto Spanner , File Flat Bastard , File Flat Second Cut , File Flat Smooth , Plier - Flat Nose , Round Nose Pliers , Scriber Straight , Hammer Ball Pen , Allen Key(Hexagonalof 9) , Tubular Box Spanner , Magnifying Lenses , Continuity Tester , Hacksaw Frame Adjustable , Chisel - Cold - Flat , Scissors , Handsaw 450Mm , Hand Drill Machine Electric With Hammer Action , First Aid Kit , Bench Vice , List Of Equipments , Multiple Output Dc Regulated Power Supply , Dc Regulated Variable Programmable Dc Power Supply , Lcr Meter (Digital) Handheld , 70 Mhz Mixed Signal Oscilloscope ( 4 Analog + 16 Digital Channel ) , 25 Mhz Arbitrary Waveform Generator With Digital Display For Frequency And Amplitude , 6 1/2 Digit Digital Multimeter , 3Ghz Spectrum Analyzer With Built-In Tracking Generator , Or Electronics Workbench , Multi Function Test & Measuring Tool For Field Applications And Testing Compatible With Laptop , Electrical Safety Trainer , Analog Component Trainer With Following Seven Basic Modules • Diode Characteristics (Si,Zener,Led) • Rectifier Circuits • Diode As Clipper Circuit • Diode As Clamping Circuit • Zener As Voltage Regulator. • Transistor Type Npn & Pnp And Ce Characteristics • Transistor As A Switch , Digital Ic Trainer , It Workbench For Computer Hardware And Networking , Laptop Latest Configuration , Laser Jet Printer , Internet Broadband Connection , Electronic Circuit Simulation Software With Five User Licenses , Different Types Of Electronic And Electrical Cables, Connectors, Sockets, Terminations. , Different Types Of Analog Electronic Components, Digital Ics, Power Electronic Components, General Purpose Pcbs, Bread Board, Mcb, Elcb , Smd Soldering & De Soldering Station With Necessary Accessories , Smd Technology Kit , Microcontroller Kits (8051) Along With Programming Software (Assembly Level Programming) With Six Important Different Application Modules 1. Input Interface Switch, Matrix Keypad, Ascii Keypad 2. Display Lcd, Seven Segment, Led Matrix 3. Adc & Dac 4. Pc Interface Module 5. Motor Dc, Stepper, Servo 6. Daq , Sensor Trainer Kit Containing Following Sensors A)Air Humidity And Temperature B)Rtd C)Atmospheric Pressure D)Air Quality E)Smoke Detector Sensors F) Limit Switch G)Photo Sensors H)Capacitive Displacement , Different Types Of Electronic And Electrical Cables, Connectors, Sockets, Terminations. , Different Microcontroller/Processor Training And Development Platform For Avr, Pic, Arm And Ardui , Internet Of Things Explorer , Field Interface And Protocol Simulation Kit , List Of The Machineries , Solar Power Lab , Solar Pv Module Analyzer , Wireless Communication Modules For Interfacing With Microcontrollers A) Rfid Card Reader B) Finger Print C) Zigbee D) Gps E) Gsm F) Bluetooth G) Wifi , Sensors For Smart Environment Application , Sensors For Smart Parking , Sensors For Smart Water & Waste Water Management And Monitoring , Weather Monitoring System , Smart Solar Street Lighting Training Platform , Iot Based Smart Streetlight System , Smart Transportation Monitoring System , Sensors For Smart Building , Iot Data Acquisition Systems And Protocol Converters , Iot Edge Computing Device , Cloud Based Iot Scada , D. Shop Floor Furniture And Materials - For 2 (1+1) Units No Additional Items Are Required. , Instructor’S Table , Instructor’S Chair , Metal Rack , Lockers With 16 Drawers Standard Size , Steel Almirah , Interactive Smart Board With Projector , Fire Extinguisher , A. Trainees Tool Kit , Steel Rule , Hand Gloves , Safety Shoes , Helmet , B. Tools, Instruments And General Shop Outfit , “V” Block , “V” Block , Micrometer Outside , Vernier Caliper , Micrometer Inside , Metal L , Metal L , Angle Plate , Spirit Level , File Warding , File Knife Edge , File Cut Saw , File Feather Edge , File Triangular , File Round , File Square , File Square , File Triangular , File Flat , File Flat , File Flat , File Swiss Type , File Half Round , File Half Round , File Round , File Hand , Card File. , Oil Stone , Pliers Combination , Blow Lamp , Spanner , Spanner Adjustable , Box Spanner , Glass Magnifying , Clamp Toolmaker , Clamp “C” , Clamp “C” , Scraper Flat , Scraper Triangular , Scraper Half Round , Chisel , Chisel , Chisel , Motorized +Tenn Saw , Hand Hammer , Hacksaw , Mallets Wooden , V-Block, Files, Mallets, Screwdrivers, Chisels, Etc. , Hand Drilling Machine , Metal Saw , Straight Grinder Heavy Duty With Attachments , Professional Air Blower , Jig Saw Portable , Hammer Drill Wired , Hand Held Sander / Polisher , Digital Dial Torque Wrench , Lifting Tackle/Sling , Impact Wrench , Laser Light Pen , Surface Plate , Digital Screw Pitch Gauge , Laser Distance Measurement Instrument , Palm Scale , Allen Screwdriver Wrench Tool , Universal Quick Adjustable Multi-Function Wrench Spanner , Double Ended Wrench Hex Socket Spanner , C. General Machinery / Software Installations (Automobile Bom) , Car Lift -4 Ton , 2 Wheeler Bike Or Scooter Assembly Set , Transmission / Gearbox Demo Kit , Cooling System Components Arranged On A Stand With Electric Motor , Exhaust System , Mini Commercial Vehicle Chassis Structure , Rear Axel , Suspension System-Front And Rear On Stand , Steering Wheel And Tyre Systems Assembly On Stand , Disc 7 Drum Brake Systems On Stand (Working Model) , Engine And Transmission Systems On Stand (Working Model) , Hvac Demo Kit , Electronic Ignition System Of An Automobile 4 Wheeler , Demonstration Board Of Working Model Mpfi System With Motorized Control , Instruction Kit For Charging System , Instruction Kit For Starting System , Lighting And Wiring System Mock Layout , System Set Up And Integration With Design. , Electric Vehicle , Electric Vehicle Kit Chassis (In Sets) , Multimeter Digital , Ammeter Able To Read Upto 300 A , Continuity Tester , Tyre Pressure Gauge , Measuring Tape , Electrical Soldering Iron , A. Trainees Tool Kit , Steel Rule , Engineer’S Square , Bevel Straight Edge , Centre Punch , Dot Punch , File Flat Bastard , File Flat 2Nd Cut , File Flat Safe Edge , File Triangular Rough , Hammer , Scriber , Vernier Caliper , Micrometer (Outside) , Safety Goggles (Personal Protective Equipment) , Screw Driver Electrician , Screw Driver , Long Nose Plier , Combination Plier , Diagonal Cutter , Screw Driver Philips , Tweezers , Knife , Wire Stripper , Neon Tester , Scissors , Soldering Iron , Bread Board , B: Tools And Equipments: , Caliper Outside , V-Block , Divider – 150 Mm , Screw Driver , Circlip Plier (Inside And Outside) Each , Centre Gauge , Oil Can , Oil Gun And Grease Gun Each , File Flat Smooth , File Flat Smooth , File Half Round Bastard , File Half Round Smooth , File Triangular Smooth , File Round Bastard , File Square Smooth , Knife Edge File , Needle File Assorted (12 Nos.) , File Card (Spattle) , Scraper Flat , Hammer Ball Peen , Hammer Cross Peen , Chisel Cold Flat , Chisel Cross Cut , Chisel Half Round , Chisel Diamond Point , Scribing Block , Cast Iron Surface Plate , Granite Surface Plate , Tap Extractor , Screw Extractor , Hand Taps And Dies , Bench Vice , Machine Reamer , Machine Tap Set , Twist Drill , Twist Drill , Taper Shank Drills , D.E Spanners , Letter Punch , Number Punch , Parallel Block Standard Sets , Allen Key Metric , Centre Drills , Parallel Hand Reamer , Star Dresser , Diamond Dresser With Holder , Surface Gauge , Angle Plate-Adjustable , Micrometer –Inside – Outside , Vernier Caliper With 0.02Mm Least Count , Digital Vernier Caliper , Digital Micrometer( Inside, Outside And Depth ) , Height Gauge , Vernier Bevel Protractor , Sine Bar And Sine Centre Each , Sprit Level , Slip Gauge Set ( Std ) , Magnetic Stand , Dial Test Indicator , Dial Test Indicator , Bore Gauge , Straight Edge-Single Beveled , Tool Maker’S Clamp , C – Clamp- , Bearing Puller , Ammeter , Ammeter , Voltmeter , Pf Meter , Phase Sequence Meter , Digital Multi Meter , Energy Meter, Single / Three Phase , Clamp On Meter , Ammeter Portable Type , Test Lamp , Tong-Tester , Line Tester , Batter Tester , Electrician Tool Kit , Rechargeable Battery , Pressure Transducers Panel Board To Demonstrate Pressure Gauge, Load Cell, Bourdon Tube, Capacitive Transducers. , Flow Transducers Panel Board To Demonstrate Flow Nozzle, Vane Anemometer, Rota Meter. , Temperature Transducers Panel Board To Demonstrate Bimetallic Strip, Rtd, Thermocouple, Thermistor. , Level Transducers Panel Board To Demonstrate Capacitive And Float Switch. , Insulated Screw Diver , Insulated Combination Cutting Plier , Small Screw Driver , C. Tools & Equipment Of Electrical & Sensors , I) Electrical , Digital Multimeter , Variable Resistance Box, Resistors , 9V Dc Battery With Cap , Dual Power Supply , Solder Iron, Solder Lead, Pcb Board (Groove Board), Solder Wick , Inductor , Relay, Led , Function Generator , Bread Board , Synchronous Motor, Capacitor For Synchronous Motor , Power Chord, Connecting Probes, Single Strand & Multi Strand Wires , Ii) Senors , Power Supply , Sensor Kit , D. Mechatronics Lab Outfit , Discrete Component Tester Trainer Kit , Analog Circuit Trainer Kit , Soldering And De Soldering Station , Power Electronic Trainer , Ac Squirrel Cage Induction Motor , Dc Motor Trainer Board. , Auto Transformer , C.R.O , 50 M Hz , Digital And Analog Ic Tester , Digital Tachometer , Signal Generator , Dc Power Supply Unit , Digital Earth Tester , Firefighting Equipment , Linear Ic Trainer Kit , Ac / Dc Motor Speed Control Trainer Kit , Optical Transducer Trainer Kit. , Simple Servomotor Trainer Kit. , Simple Stepper Motor Trainer Kit , Linear Scale Setup For Positional Accuracy Check , A/D And D/A Trainer Kit , Ups , Stabilizer Trainer Kit , Ac Drive , Dc Drive , Digital Circuits Trainer Kit. , 8051 Microcontroller Trainer Board With Led, Switches, Buzzer, Dc Motor And Stepper Motor Interfacing Circuits. , Plc With Io Simulation Panel And Programming Software With Plc Application Module , Ethernet To Profibus Converter , Hmi , Personal Computers , Operating System (Windows Latest Version) , Portable Hard Disk.(1 Tb) , Ms-Office , Rj45,Bnc,D-Shell, Edge Connector Crimping Tool , Megger , Encoder Trainer Kit , Panel Wiring Work Bench , Protection Devices Trainer Board. , Limit Switch, Pressure Switch, Micro Switch, Float Switch, Foot Switch , Application Trainer Kit Of Proximity Sensor, Float Switch, And Reed Switch , Lvdt Trainer Kit. , Actuators Application Trainer(Servo, Stepper Motor, And Solenoid) , Simple Servomotor Trainer Kit. , Simple Stepper Motor Trainer Kit. , Piezoelectric Transducer/Actuator Trainer Kit. , Pneumatic Control Trainer Kit With Required Pneumatic Components. , Hydraulic Control Trainer Kit With Required Hydraulic Components. , Electro-Pneumatic Control Trainer Kit Using Plc With Required Components. , Electro-Hydraulic Control Trainer Kit Using Plc With Required Components. , Linear Scale Setup For Positional Accuracy Check , Plc Based Conveyor System With Pick And Place And Sorting Of Objects (Pneumatic And Hydraulic) , Cut Section Models Of Pneumatic And Hydraulic Motors ,Pumps , Electrical Simulator Software , Electronic Simulator Software , Hydraulics And Pneumatics Simulator Software , E. General Shop Outfit , Sensitive Drilling Machine , Pillar/Column Type Drilling Machine , Power Hacksaw Machine , Double Ended Pedestal Grinder , Ss And Sc Centre Lathe (All Geared) With Minimum Specification As: , Shearing Machine (Lever Type) Hand Operated Complete , Universal Milling Machine , Horizontal And Vertical Milling Machine , Hydraulic Surface Grinding Machine , Universal Cylindrical Grinding Machine , Cnc Turn Centre , Cnc Vertical Machining Centre , Drafting /Autocad Software , Mechanical Parametric Design /Creo (Proe) Software , Simulation Software
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Jharkhand View Result →
35.
Housing Urban and Rular Development #10215372 Price Bid
Tender For Supply Installation Testing Commissioning Of Miscellaneous Electrical Items At Meditation Centre, Rajpur Road, Delhi.--- 1 Sh: - I ( Ei Work ) Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Steel Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A ) Group C 2 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. I ) 3 X 4 Sq. Mm 3 6 X 4 Sq. Mm 4 3 X 6 Sq. Mm 5 Supplying And Fixing Of Following Sizes Of Steel Conduit Along With Accessories In Surface / Recess Including Painting In Case Of Surface Conduit, Or Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. I ) A ) 20 Mm 6 B ) 25 Mm 7 Supplying And Fixing Following Size / Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required. A ) 1 Or 2 Module ( 75 Mmx75 Mm ) 8 B ) 3 Module ( 100 Mmx75 Mm ) 9 C ) 12 Module ( 200Mmx150mm ) 10 Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. A ) 5 / 6 A Switch 11 B ) 15 / 16 A Switch 12 C ) 3 Pin 5 / 6 A Socket Outlet 13 D ) 6 Pin 15 / 16 A Socket Outlet 14 Sitc Of 34 To 36 Watt 600Mm X 600Mm Nominal Size Ledrecess / Surface Mounted Fitting Suitable For Operation At 150 To 270Volt, 50 Hz + / - 5% Frequency, ( 6000K ) , Crca Sheet Duly Power Coated / Aluminium Body, Power Factor > 0.95Luminaries Efficiency = 100 Lumen / Watt , Driver Efficiency > 85%, Ip-20 Class Protection, 2.5 Kv Surge Protection, L-70 Life 50.000Minimum Burning Hours, Complete With Electronic Driver In The Existing False Ceiling With The Help Of Suitable Chain & Wiringwith 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable I / C Dismantling Of Existing Fittings If Reqd I / C Connection, Testing Etc Complete As Reqd At Site. 15 S.I.T.C Of Surface / Wall Mounted ( Integrated Type ) 18To20 W Led Batten Fitting 1200 Mm Long ( N / S ) Made Out Ofcrca Sheet Duly Power Coated / Aluminum Extruded Body Confirming To Ip - 20, Suitable For Operation On 150 V To 270 V, 50 Hz Ac Supply, Having Power Factor = 0.90, Cri = 80, Luminaries Efficacy = 100 Lumen / Watt , Driver Efficiency > 85%, 2.5 Kv Surge Protection, L-70 Life, 50, 000 Burning Hours. Complete I / C Dismantling Of Existing Fitting, Connection, Etc. Complete As Reqd. 16 Supplying And Fixing Of1200 Mm Sweep Ac Ceiling Fan With Three Star Rating And Above Complete With All Accessories But Without Regulator I / C Wiring The Down Rod Of Standard Length ( Upto 30 Cm ) With 1.5 Sq Mm Frls Pvc Insulated Copper Conductor Cable I / C Dismantling The Existing Non Working Fan Etc. Complete As Required. 17 Sitc Of 2.0 / 2.2 Tr 3-Star Inverter Split Ac Unit With Outdoor Stand Dully Powder Coatedsuitable For Operation On 220V + 10% Single Phase 50 Hz Hv Ac Supply Complete With Energy Efficient Rotary Compressor Type Of Refrigerant R32 / 410, Copper Condenser Ref. Pipe, Indoor & Outdoor Unit, Complete In All Respect & With Cordless Remote I / C Connection Etc. As Required. 18 Supplying, Installation, Testing And Commissioning Of 5 Kva, Copper Wounded, Wall Mounted Voltage Stabilizer With Led Display, Surge Indicator, Automatic Reset Suitable For Operation On 220V + 10% Single Face 50Hz, Hv, Ac Complete Etc. As Required. 19 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 20 Providing And Fixing Of Oil Type Room Heater Of Capacity 2400 Watt 9 Fins Suitable For Operation On 220 V, Ac 50Hz Single Phase Supply With Following Parameters:- 1 ) Adjustable Thermostat2 ) Power Indicator Light3 ) Tip Over Switch4 ) Over Heating Protection5 ) Castor Wheels6 ) With Integrated Handle 21 Supplying, Installation, Testing And Commissioning Of Convection Type Microwave Oven 28 Ltr, 1500 Watts Suitable For 230 V , 50 Hz, 1Ph With Power Defrost , Preheat, Eco Mode, Auto Programs Etc Complete As Required. 22 Supplying, Installation, Testing And Commissioning Ofdomestic Refrigerator Of Capacity 95 Ltr Suitable For 230 V , 50 Hz, 1Ph Ac Supply Having Single Door Etc Complete As Required. 23 Supplying, Installation, Testing And Commissioning Of Water Cooler With Inbuilt Purifier Of Storage Capacity Not Less Than 80 L With Cooling Capacity Not Less Than 60 L / Hr Made Up Of Stainless Steel Suitable For 230 V, 50 Hz, 1 Ph Ac Supply With 3 Stage Filtration With Working On R 22 Refrigerant Etc. Complete As Required. ( Blue Star Model No. Swcsdlx600uvroe / Kent / Ion Exchange ) 24 Supplying, Installation, Testing And Commissioning Of Water Dispenser With Cooling Cabinet Of Capacity Not Less Than 3.2 L Made Up Of Plastic Suitable For 230 V, 50 Hz, 1 Ph Ac Supply Etc. Complete As Required. 25 Supply, Installation, Testing And Commissioning Of Commercial Airpurifier For 350 Sq.Ft Area That Keeps Indoor Air Free From Dust ( Pm 2.5 & Pm 10 ) , Gases, Smoke, Odor Forming Compounds, Allergens And Air Borne Infectants. It Should Have Minimum 7 Stage Air Purification Having 5 Kinds Of Filtration Technologies Incorporating Pre-Filter, Anti Bacterial Filter, Hepa Filter And Activated Carbon Filter, Photo Catalytic Filter, Uv & Ionization. It Should Have Quite Ac Motor, Air Quality Sensor With Led Display, Filter Change Indicator, Full Feature Remote Control To Switch Between Modes And Smart Feather Touch Operational Panel Etc. As Required. 26 Sitc Of Gsm + 2G / 3G / 4G , 5V Dc Signal Booster With Two Indoor Panel Antenna, Ac Adapter, Having Frequency Band 900+1800+2100 Mhz, Output Power 23Dbm, Gain > 65Dbi, Scope To Connect Four Indoor Panel Antenna, Minimum Area Coverage 2500Sqft, System Must Be Non Hazardious And Contractor Must Place A Certificate For It Including Demo At Site Etc As Required. 27 Supplying And Laying Of Network Booster Antenna Rg-11 Coaxial Cable On Wall / Surface / Pipe / Channel Suitable For Frequency Band 800-2500 Mhz And Having Vswr < 1.5, Input Impedance 50 Ohm, Gain 12 Dbi Including N Male Connectors And Bullets Etc As Required. 28 Supply And Fixing Of Additional Panel Antenna And Splitter Suitable For Above Signal Booster I / C Testing And Commissioning Etc As Required. 29 Sitc Of Gsm + 2G / 3G / 4G Outdoor Banana Antenna, Having Frequency Band 900+1800+2100 Mhz System Must Be Non Hazardious And Contractor Must Place A Certificate For It Including Proper Fixing Of Antenna On Terrace Demo At Site Etc. As Required. 30 Sh: - Ii ( Cctv Work ) S / I / T / C Of 2Mp Dome Camera, With Poe Support, 1 / 2.8-Inch , Imager Type Cmos , Resolution 1920 X 1080 , H.265, White Balance Range: 2, 000° To 10, 000°K; Auto, And Manual, 3D Noise Reduction Yes ( On / Off Selectable ) , Lens 2.8-12 Mm , Minimum Illumination Sensitivity F / 1.4, Color 0.0169 Lux 0.00416 Lux , Mono 0.01 Lux 0.0025 Lux, Mono ( Ir On ) 0.0 Lux , Day / Night Capabilities Mechanical Ir Cut Filter ( On / Off / Auto ) , Ir Range Minimum 20 Mtr ; Auto On In Night Mode, Or Off, Signal To Noise Ratio =50 Db, Lens Type Built-In; Auto Iris Type Dc, Aspect Ratio 4:3, Frame Rates Images Per Second ( Ips ) 25, Video Encoding H.265, H.264 High , Network Port Rj-45 Connector For 10 / 100 Base- Tx, Operating Humidity 5% To 95% , Storage Humidity 20% To 80%, Impact Resistance Ik10 , Ip66 , Certifications Ce, Fcc, Ul / , Bis Etc. As Required. 31 S / I / T / C Of 2Mp Bullet Camera , With Poe Support, 1 / 2.8-Inch , Imager Type Cmos, Resolution 1920 X 1080, Ir Range Minimum 20 Mtr , Testable, Electronic Shutter Range 1 / 10, 000 Sec ~ 1 Sec , 3D Noise Reduction Yes ( On / Off Selectable ) , Signal To Noise Ratio =50 Db , Mechanical Ir Cut Filter ( On / Off / Auto ) , Lens Type Built-In; , Focal Length 2.8 ~ 12 Mm , Frame Rates 25, Video Encoding H.265, H.264 High, Network Port Rj-45 Connector For 10 / 100Base-Tx , Ip66 / 67 , Onvif Profile S, Profile G, Profile Q, And Profile T , Supported Protocols Tcp / Ip, Udp / Ip ( Unicast, Multicast Igmp ) , Operating Humidity 5% To 95% , Storage Humidity 20% To 80%, Impact Resistance Ik10, Ip66, Certifications Ce, Fcc, Ul / , Bis Etc As Required. 32 Supply, Installation , Testing &Commissioning Of Up To 8 Channelnvr System Ip Camera Input / H.265 / H.264 Dual Codec Decoding Support 4K Resolution Upto 4Mp Recording / 160Mbps Incoming And 320Mbps Outgoing Bandwidth / Support 2 Sata Hdds Up To 12Tb, 1 Usb Ports / Hdmi / Vga Simultaneous Video Output / Support Multi-Brand Network Cameras 33 Supplying & Fixing Of 8 Port Layer 2, 10 / 100 / 1000 Elthernet Ports, 2 Gigabit Small Form Santic Pluggable ( Sfp ) Module Uplink Slots Poe Budget Of Upto120 Watt Of Complete, Testing As Required. 34 Sitc Of 6Tb Cctv Hdd. This Enterprise Hard Disk Specially Designed For 24*7 For 30 Days Etc. Complete As Required. 35 Sitc Of32 Inchesfollowing Sizes ( Screen Size ) Fhd Led Tv, Full Hd 1920 X 1080 Pixels With Inbuilt Speaker Of 20 Watt ( Record, Pause, Rewinding, Live Shows ) , Connectivity 2 Hdmi Port & 1 Usb Port, With Complete All Accessories Etc. As Reqd. 36 Sitc Of Full Hd Professinal 55 Diagonal Size, 60Hz Led Blu Type Technology, 1920X1080 ( 16:9 ) Resolution , 330Nit Brightness , Rgb Inputs Of Analog D-Sub, Dvi-D, , Video I / P Of Cvbs Component, Hdmi, And Audio I / P Of Stereo Mini Jack, Power Supply Ac 100 - 240 V~ ( + / - 10 % ) , 50 / 60 Hz, Etc With Mounting Accessories Etc As Required. 37 Supplying Fixing Of 24 Port Fully Loaded Jack Panel For The Network Switchetc As Req. 38 Supplying And Fixing Of 1 Mtr Cat-6 Patch Cord In Cctv Camera And Newtork Complete As Required. 39 Supplying And Fixing 9U Wall Mounted Powder Coated Crca Sheet Made, Networking Rack With Lockable Front Glass Complete As Required. 40 Supplying And Drawing Of4 Pair Cat 6 Lan Cable On The Existing Surface / Pvc Conduit As Required. ( I ) 1 Run Of Cable 41 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. ( I ) 25Mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Delhi View Result →
36.
Housing Urban and Rular Development #10191469 AOC
Furnishing Work Of Classrooms, Library And Laboratory, Equipments And Miscellaneous Work For The New University Campus Of Binod Bihari Mahato Koyalanchal University, Dhanbad- 1 Supplying Metal Exhaust Fan 300 mm Sweep-Supplying, erecting and testing of approved make 300 mm sweep Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including frame bolt/ Anchor hole fastners etc, complete finished of a as required. 2 Wall Demolition- Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 3 Taking down chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 4 Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 5 Taking sown chaukhats in windows including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. 6 Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 7 Door Frame- Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile C - Fixing with adjustable lugs with split end tail to each jamb 8 Providing designation 125 mm thick reinforced designation 75A brick work in CM (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 25 including the cost of screening, carriage of materials, scaffolding , raking out joints to 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. 9 Extra for providing and placing in position 2 Nos 6mm dia. M.S. barsat every third course of half brick masonry. 10 Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. 11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 12 Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. 13 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.-Granite stone slab colour black, Cherry/Ruby red-Area of slab over 0.50 sqm 14 Sink- Supplying fitting and fixing white glazed fires clay sink of approved make with overflow arrangements supported on C.I. Or R.S. Painted bracket 40mm. Dia C.P. Brass waste with C.P. Brass chain and rubber plug 40mm dia P.V.C. Waste pipe about 750mm long with brass coupling at one endand 15mm C.I. body brass spindle bib cock of approved quality of weight not less than 450grams including cutting wall and making good the same etc. all complete as per specification and direction of E/I. Size-600 mm x 450 mm x 250 mm ) 15 FULL HEIGHT WOODEN PARTITION WITH PARTLY GLAZING- Providing and fixing partitions made of 50 mm x 50 mm pine wood / 2nd class teak wood @ 600 mm c/c both ways with the help of Fasteners/Screws etc. to achieve desired strength. Providing & fixing Comm. grade 12 mm thick commercial Pty board on the frame on both the faces i/c exposed side edges of Frame & 1.0mm thk Laminate on both outer faces and exposed side edges of ply as per the directions. Partition shall also be provided with 8 mm thick clear float glass of approved size with Polished Edges of approved brands in Wooden Partition Openings as required, fixed from all four sides from both ways inside partition openings with 10mm.tk. T.W. beadings/12 mm thick MDF Board Lipping/D-Buttons of design as per approval and direction at site. Etching / Etching Film (50 Microns) is to be provided as per approved pattern on 8 mm thick clear float glass. All wooden exposed surfaces shall be melamine polished in approved shade and texture finished as per the directions and satisfaction of Engineer In charge, compelete.This work will 16 Frosted glass sheet of nominal thickness 4 mm- Providing and pasting frosted film on glass work including all materials tools, plants and labour complete as per the directions of the Engineer-in-charge. 17 Supply & laying of PVC insulated and sheathed 1.1 kv grade twin twisted 1.5 sqmm cu flexible wire for speaker. 18 Providing & installation 1.5 Tr. 5 Star split A.C (Inverter Type) I91391-part-1 19 Copper refregerant pipe-Providing & installation Copper Tube of size 5/8 for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation 20 Providing & installation 5 KVA wall mounted automatic voltage stablizer from range 140 V to 280V 21 Providing & installation Drain Pipe for AC 22 Non Schedule 23 * PROVIDING AND SUPPLYING MODERN DESIGN RECEPTION DESK IN ENGINEERED WOOD MAKE THE PRODUCTS UTILE AND A DELIGHT.TIMELESS DESIGN THAT ELEVATES YOUR OFFICE SPACE STRUCTURE OF SPACIOUS RECEPTION DESK,TABLETOP OFFERS YOU A GENEROUS LOOK FOR WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 1800 MM(L)X 600 MM(D)X 750 MM(H) WHICH GIVE MORE SURFACE AREA FOR WORK ,TABLE TOP MADE OF25MM THICK ALSO TABLE TOP BASED ON SIDE PANELS MADE 18MM THICK PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST. * COMBINATION CONSTRUCTION OF RECEPTION DESK ABOVE TABLE TOP 18 MM THICK COUNTER TOP TO TABLE TOP HEIGHT IS @ 300MM ,OVERALL RECEPTION DESK HEIGHT IS @ 1050MM WITH COUNTER TOP,TABLE TOP MADE 25 MM THICK PRELAM PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK PVC EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXED WITH HOT MELT GLUE.ALONG WITH 18MM THK ADDITIONAL MODESTY PANEL SIZE IS 1350 MM (L) X 700 MM (H) MADE BY EXCLUSIVE FROSTY WHITE COLOUR WITH EPIC DESIGN & LOOK.1 MOBILEPEDESTAL (2 DRAWERS + 1 FILING CABINET )SIZE IS 450 MM(L)X 450 MM(D)X 725 MM(H) IN PROVIDED WITH CENTRAL LOCKS FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING & PEDESTALS MOVE ON NYLON CASTORS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST 24 PROVIDING AND SUPPLYING * MEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 580MM(L)X 670MM(D)X1110MM(H) ,*THE CHAIR MADE OF FULL UPHOLSTERY IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : AMREST IS HAVING TWO ADJUSTMENT HEIGHTS (UP & DOWN) .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM. SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 480MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1110MM & MINIMUM HEIGHT IS1010MM* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650MM NYLON BASE WITH SMOOTH CASTORS . 25 PROVIDING AND SUPPLYING 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION,THREE SEATERTYPE WAITING AREA CHAIR - MATERIAL : STAINLESS STEEL SIZE 1820MM(L)X 690MM(D)X 790MM(H) COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 26 Supplying of Portrait/Landscape Not applicable Fabric Pin Up Notice Boards(Fabric Pin Up Notice Boards 3 X 6 FT GREEN),Specification-Width of Board in mm:900 mm,Colour(Front/ Display layer):Green,Height of Board in mm:1800mm,Rear panel material of Board:Laminated sheet,Overall pinability depth ofBoard in mm:9 millimeter,Core material thickness inmm:9 millimeter 27 PROVIDING AND SUPPLYING COLLEGE DESK TOMKINS MATERIAL : PRELAMINATED PARTICLE BOARD WITH M.S BASE UNIT SIZE : 590 MM(L) X 1090 MM(D) X 830 MM(H) PER SEAT SIZE- 590 MM X 375 MM X 450 MM/ONE SEATER DESK SIZE :1090 MM(L) X830 MM(H) COLOUR : AVAILABLE ON REQUEST/FINISH : EPOXY POLYESTER ,* PROVIDING & SUPPLYING TWO SEATER COLLEGE DESK TOMKINS COMBINATION OF THREE ROWS FIRST , MIDDLE AND LAST SCRATCHPROOF EASY WIPE TOP / DURABLE ,STRONG & SAFE,UNDERSTRACTURE MADE OF MAIN FRAME MDE OF CRCA POWDER COATED IS GRAD:304 M.S BLACK POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) EPOXY POLYESTER COATING.* TABLE TOP & MODESTY PANNEL MADE IN 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS.CHAIR WITH GAS LIFT ,A). BACK FRAME: 1.2MM COLD ROLLED STEEL/B). BACK BOARD: 10MM PLYWOOD, NO CUSHION C). SEAT BOARD: 15MM PLYWOOD, NO CUSHION/D). TIP-UP SYSTEM: SPRING MECHANISM E). 2. LEG: COLD-ROLLED STEEL, FIXING ON THE FLOOR BY SCREWS, 80 X 35 X 1.5MM THICK OVAL TUBE, BLACK POWDER SPRAYING.* THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST 28 Supplying of Material & Subtype Engineered Wood Table Top Material Engineered Wood Finish Matte Colour & Colour Family Brown - Classic Walnut Dimension (W)550mm X (D)550mm X (H)1200mm Size Compact Assembly Type Knock Down (Obelisk), 29 Suppling of Writing Board ( 4x10 Non-Magnetic) of material Top Surface materials (Used for white boardsurface)-Porcelain,Top surface material thickness -0.7 mm to 0.8 mm,Frame material -Anodized extruded aluminum alloy hollow section conforming to IS 733 (With latest amendment),Frame wall thickness-1.2 mm,Frame section front -20 mm,Frame section side -16 mm,Core material-MDF board grade-I conforming to IS 12406 (with latest amendment),Core material thickness -9 mm as per Department incharge 30 Supplying of 14 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 8850 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 8850 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST, * CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST, 31 Supplying of * HIGH BACK 360° DEGRE REVOLVING CHAIR SKU : MARVEL/HB/ECO ,* ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1380MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM . * ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) , SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1380MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 32 Supplying ofMEDIUM BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 595MM(L)X 670MM(D)X1125MM(H) ,*THE CHAIR MADE OF FULL MESH IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH ABOUT STYLE TYPE IS MODREN.DETAILS :* * ARMS : FIXED PP ARMSREST .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT).* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK :FRAME OF DESIGN SHALLBE CURVEDMADE OF TWO PIECES INJECTION MOULDED FRAME COVER WITH MESH .BACKREST SUPPORTADJUSTABLE LUMBAR SUPPORT* MECHANISM : SINGLE LOCKING MECHANISM .* ONLY SEAT SIZE IS 670MM(L)X 595MM(D)X470-570MM(H) ,SEAT MAXIMUM HEIGHT IS 570MM & MINIMUM HEIGHT IS 470MM & BACK MAX HEIGHT IS @ 1125MM .* GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : NYLON BASE IS 620MM PITCH CENTER DIA (660MM WITH CASTORS) . 33 Supplying of Tte Mild Steel Pipe of diameter 19 mm and wall thickness 16gauge. Classroom Chairs, tte,Thickness-2mm to 45mm,Material-Mild Steel Weight-Depends upon the size,Outside Diameter-0.80 Inch to 36 Inch 34 Supplying of 1-Bay Sprocket Chain Drive Mechanism MobileStorage Compactors,Material-Mild Steel Product Type-1 Bay,Height -7 ft,Storage Capacity-50-80 kg Usage/Application office, Home, Hospital, Store Room, Warehouse 35 Supplying of -- Movable File StorageSystem (Compactor) 1-Bay Mechnized Drive Type(COMPACTOR 2 ( 04 BODY)) 36 Supplying of Methodex MS1-6MCMETHODEX(Methodex MS1-6MC),Accutec Mobile Storage System,Material SS,Usage/Application-Warehouse Height-8-10 Feet,No of Layers-5 37 Supplying of : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 38 Supplying of : PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK . * PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 39 Supplying of* HIGH BACK 360° DEGRE REVOLVING CHAIR * ALL OVER SIZE IS : 590MM(L)X 505MM(D)X1280MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING . * USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * MECHANISM : KNEE TILT MECHANISM . * ONLY SEAT SIZE IS 505MM(L)X 505MM(D)X610MM(H) & THE BACK SIZE IS 590MM(L)X 710MM(H) SEAT MAXIMUM HEIGHT IS 610MM & MINIMUM HEIGHT IS 510MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1280MM & MINIMUM HEIGHT IS1180MM * GAS LIFT 100 MM TELESCOPIC HAUDRAULIC * BASE : 650 MM CHROME BASE WITH SMOOTH CASTORS . 40 Supplying of* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 570MM(L)X 500MM(D)X940MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE . DETAILS : * ARMS : PADDED ARMREST. * USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED. * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT * ONLY SEAT SIZE IS 570MM(L)X 500MM(D)X475MM(H) SEAT HEIGHT IS @ 940MM & BACK HEIGHT IS @ 475MM . * FIXED CANTILEVER CHAIR . * BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 41 * SUPPLYING AND PLACING FIVE SEATER (3+1+1) EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 3 SEATER- 1905MM(L) X890MM(D)X 870MM(H)SOFA SIZE IS 1 SEATER -(W)960mm X (D)890mm X (H)870mm ,WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME. * COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 28 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 50MM THIK,40MM THICK BACK FOAM HAVING 20 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 20 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BLACK-EERIE BLACK-COFFEE BROWN,BROWN-BURNT UMBER COLOUR, IT COMPLEMENTS THE MODISH LEGS ARE MADE BY ROUND SHAPE IN PVC MATERIAL. 42 Supplying of Material & Subtype Solid Wood - Beech Wood Table Top Material Clear Glass,Frame Material Solid Wood Leg Material Solid Wood,Finish Matte Colour & Colour Family Brown - Walnut,Dimension (W)1130mm X (D)630mm X (H)410mm,Number Of Recliners 1 Number Of Reclining Positions 3,Size Standard (HOPPER/CT), 43 Supplying of6 SEATER Rectangular MEETING TABLE DURIAN MODEL SMART/CON/6FT MADE OF PRELAMINATED PARTICLE BOARD WITHSLANTLEGS50X50 MM MS UNDERSTRUCTURE IN POWDER COATING 2TOP MADE OF25MMTHICK PRELAMINATED PARTICLE BOARD IN FROSTY WHITE COLOR WITH MAIN TABLE SIZE1800MM(L)X 1050MM(D)X 750MM(H) (SMART/CON/6FT/A), 44 SUPPLYING & PROVIDING CAFETERIA CHAIR SIZE IS 381MM(L)X 419MM(D)X839MM(H) A COMBINATION OF SYNTHETIC FIBER WITH STAINLESS STEEL MAKE THE PRODUCTS UTILE AND A DELIGHT, THE COMPLETE STRUCTURE SHALL BE MADE UP OF 20% GLASS FILLED BLOW MOLDED HIGH-DENSITY POLYETHYLENE ANDIS,THE FRAME STRUCTURE SHALL BE SUPPORTED BY ( 2 STRAIGHT + 2 SLANT ) FOUR LEGS.THE TUBULAR WELDED FRAME IS MADE FROM DIA2.22 +/- 0.03CMX 0.12+/- 0.0128 CM AND 3.5+/- 0.03 CM X 0.12+/- 0.0128 AM STAINLESS STEEL 202 GRADE TUBE & THE TUBE ARE BUFF POLISHED TO GIVE SHINY FINISH.SEAT AND IN BACK GIVEN HANDLE TO HOLDARE MADE OF INJECTION MOULDED HIGH IMPACT STRENGTH POLYPROPYLENE POLYMER COMPOUND WITH INDOOR GRADE UV RESISTANCE AND PRESSED FITTED WITH LEGS.THE CHAIR IS EASY TO STORE WHEN NOT IN USE, SINCE YOU CAN STACK UP TO 6 CHAIRS ON TOP OF EACH OTHER. (COCO/SUR). 45 SUPPLING OF METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1830MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET.HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, FITTED WITH MS BODY LOCK & HANDLE. WITH 2 NUMBERS OF GLASS DOOR SHUTTERS , THE GLASS USED SHALL BE 4MM THICK CLEAR. UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 30 KG MAXIMUM.EACHRACKSHALLBEPROVIDEDWITHSTIFFENERATBOTTOMFOR STRENGTH.THE ENTIREBODYPANELAND SHELF SHALLBEMADEOF HIGHYIELD STRENGTH,THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY 46 SUPPLING OF DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 750MM(D)X 750MM(H) 36MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITHWENGE FINISH, USING HOT MELT GLUE TO FIXING 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 25MM THICK.*PROVISION OF SIDE RUNNER OF SIZE IS 750MM(L)X 450MM(D)X 760MM(H) ,( CONSTRUCTION IS FROM RIGHT SIDE OF SIDE UNIT TOP BASED ON FIXED PEDESTAL WITH SS STUD OF GRADE 304, ON TABLE TOP PVC GROMENT HOLEFOR WIRE MANAGEMENT .*FIXED PEDESTAL OF SIZE450MM(L)X 450MM(D)X 650MM(H) PER DRAWER HEIGHT IS @ 136MM, FILLING DRAWER HEIGHT IS @ 300MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 47 SUPPLING OF* CANTILEVER CHAIR SKU : 70011/CN/A, * ALL OVER SIZE IS : 590MM(L)X 490MM(D)X980MM(H) , *THE CHAIR MADE OF FULL FABRIC INBLACK COLOUR . IT WILL COMES INFINSIH IN CONTEMPORARY STYLE . DETAILS :* ARMS : FIXED ARMS P.P. CONNECTED WITH SEAT AND BACK .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32(±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* BASE : M.S POWDER COATED TUBLAR FRAME OF CATILEVER TYPE . THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. 48 SUPPLING OF OFFICE DESKDESK STRUCTURE OF L SHAPED DESK . PRIMARY WORK SURFACE OVER ALL SIZE IS 1500MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL 18MADE OF MM THICK . *PROVISION OF SIDE UNIT OF SIZE IS 900MM(L)X 450MM(D)X 750MM(H) ,(COMBINATION CONSTRUCTION WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP, LEFT SIDE TABLE TOP BASED ON A 18MM THICK SIDE PANNEL ENGINEERED WOOD & FROM RIGHT SIDE UNIT HAVE 2 SLIDING DOOR + 1 FIXED SHELVE . *SIDE UNIT SIZE900MM(L)X 450MM(D)X 750MM(H), IN PROVIDED WITH LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF SIDE UNIT IS 18MM THICK ALONG WITH FECIA OF SLIDDING SHUTTERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST . 49 SUPPLING OF * FIX CANTILEVER ,* ALL OVER SIZE IS : 595MM(L)X 510MM(D)X875MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 500MM(L)X 510MM(D)X455 MM(H) & THE BACK SIZE IS 440MM(L)X 595MM(H) , BACK HEIGHT IS @ 440MM .* BASE : 4 LEGS METAL POWDER COATED* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 50 * PROVIDING AND SUPPLYING PENTA WORKSTATIONLSHAPE SINGLE SEATER UNIT NON SHARING IN COMPLETELY KNOCK DOWN CONDITIONS WITH AN OVERALL SIZE 1500MM(L)X 600MM(D)X 1200MM(H) THAT IS TO BE ASSEMBLED AT SITE. THE WORKTOPSHALLHAVETHESIZE1490MM-1490MM (L) x 592(D) MADEUPOF25MMTHICKPRE- LAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST . OF IS LEVEL WITH APPROVED LAMINATE AND FINISH AS PER APPROVED SHADE. * THE PROFILE OF THE TOP SHALL BE IN RECTANGLE SHAPE AND THE EDGES SHALL BE SEALEDWITH 2MM THICK THIN STRIP OF IMPERMEABLEPVCTHAT IS CUT TO FIT THE SIZE OF BOARD PANEL AND DULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THE TOP TRIM, TOP BAR, MID BAR, VERTICAL BAR, RACEWAY, SKIRTING SHALL BE MADE UP OF ALUMINIUM EXTRUSIONS (PRE-TREATED)AND DULY POWDER COATED WITH POLYESTER POWDER COATING 40P-60PTHICK . THE TRIMS SHALL HAVE THE SIZE 67MM X 19MM WITH 1.5MMTHICKCOVERED WITH DIE CAST END CAPS ON JOINTS 2 WAYS,3 WAYS& 4 WAYS(L-COVERFORCORNER,T-COVERFORMIDDLESECTIONWHEREVER REQUIRED).THEALUMINIUMRACEWAYSHALLBESITUATEDBELOWTHEWORKTOPWITHAN OVERALLSIZE149MM(H)X60MM(D)WITH1.4MMCOVERTHICKNESSAND2MMBACK THICKNESS AS PER REQUIREMENT OF INLAYING THE ELECTRICAL MANAGEMENT AND CARRYING THE WIRE HORIZONTALLY. *THE EXPOSED VERTICAL AND HORIZONTALFACES OF THE FRAMES SHALL BE SNAPFITTEDWITHTRIMS.THERESHALLBESOFT-BOARD(WITHFABRIC)ANDMARKERBOARD PROVIDED AT FRONT OF THE USER. LAMINATED TOP TILE AND BOTTOM TILE SHALL BE SITUATED AT BOTH SIDES OF THE USER AND BELOW THE WORK TOP RESPECTIVELY. THE PARTITION SHALL HAVE CONCEALED WIRE MANAGEMENT CAPABILITIES AND SHOULD BE ENGAGED FOR RESPONSIVE AND SAFE OPERATIONSOF POWER,TELECOMMUNICATIONSANDDATA(LAN)AND HASSEPARATE COMPONENTS FOR ELECTRICAL, DATA AND TELEPHONE CABLES HAVING ADEQUATE CAPABILITY OF BOTH THE VERTICAL AND HORIZONTAL WIRE MOVEMENTS.SLOTS/CUT-OUTS SHOULD BE GIVEN ON RACEWAYSTOFIXALLELECTRICALANDDATAPOINTS.SINGLESIDEDPVCWIRE MANAGER SHOULDBE ENCLOSEDATTABLETOP.ADJUSTABLE LEVELLERSHOE SHALL BE PROVIDED AT BOTTOM OF THE PARTITION TO AVOID SCRATCHESON THE FLOOR.PARTICLE BOARD OF GRADE II OFISLEVEL. * THREE LAYER PRELAMINATED PARTICLES BOARD (WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST .* THE SELLER / COMPANY SHOULD BE ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 CERTIFICATES OF THE MANUFACTURER CERTIFIED BY NATIONAL ACCREDITATION BOARD OF CERTIFYING BODIES, IGBC, SEDEX, GREEN PRO, AIOTA, INDIAN DESIGN MARK, FSC CERTIFICATE. THE BIDDER SHOULD BE A MEMBER OF BIFMA AND AT LEAST TWO PRODUCTS OF THE OEM SHOULD BE CERTIFIED AS BIFMA COMPLIANT AND AN OFFICIAL PRODUCT OFFICIAL LINK/SCREENSHOT OF THE PRODUCT LISTING MUST BE PROVIDED FROM WWW.BIFMA.ORG WARRANTY-5 YEARS MAKE-DURIAN /GODREJ/FEATHERLITE 51 PROVIDING & SUPPLYINGFIXING OF TWO SEATER SCHOOL DESK WITH SHELF/STORAGE UNDER DESK WHICH ONE MADE BY CAST IRON,DESK TOP MADE BY 18MM THICK PRELAMINATED PARTICAL BOARD OF GRADE II TYPE III OF IS 12823/LATEST,TWO SEATER CLASSROOM DESK CUM BENCH, TOTAL SIZE OF BENCH : 1050MM(L)X 950MM(D)X 760MM(H) DESK SIZE : 1050MM (W) X 400MM (D) X 760MM (H) BENCH SIZE : 1050MM (W) X 310MM (D) X 390 / 760MM (H) BACK SIZE : 1050MM (W) X 150 MM (H),TABLE TOP SHALL BE POLYPROPYLENE CO POLYMER (PPCP).BANDING UNDER STRUCTURE-BLACK 9005 ERW PIPE (AS PER IS:7138) : 25X25X1.2MM SQUARE MS PIPE, OF THICKNESS 1.2MM IN BLACK EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON) AT BASE WITH PLASTIC CAPS MADE OF PP COPOLYMER (3530 GRADE) ARE ALSO PROVIDED ON THE REAR FRAMES ADDING MORE AESTHETIC VALUE TO THE PRODUCT. * ADDITIONAL HORIZONTAL SUPPORTS OF M.S. C SECTIONS OF 1.5MM THICK ARE PROVIDED BELOW THE DESK & SEAT.SHELF: 0.8MM THICK POWDER COATED M.S. SHEET BELOW THE DESK & HOOKS ON EITHER SIDE OF DESK IN M.S. ROD OF DIA 6MM.TOP,SEAT AND BACK PANEL: 18MM THICK PRE LAMINATED BOARD WITH MACHINE PRESSED EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE FIXEDDULY PASTED WITH THE ASSISTANCE OF EDGE BANDING MACHINE AT 200 DEGREE CELSIUS. * THREE LAYER PRELAMINATED PARTICLES BOARD ( WOOD PRODUCT ) OF GRADE II TYPE III OF IS 12823/LATEST.* 52 Suplying of Laboratory Steel Furniture Sidebench with rack and table top of specification,Size of side benches/Island benches (LxWxH):1800 mm X 1800 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 53 Supplying of Laboratory Steel Furniture Island bench with table top Size of side benches/Island benches (LxWxH):900 mm X 1500 mm X 900 mm,Type of Frame for installation of bench:C type frame,C Type Fixed Under Bench Cabinet size:500 mm x 500 mm x 540 mm (having one door, one drawer and one adjustable/removable shelf) 54 Supplying ofPowder coated Round Classroom Stools Load of 50 Kg of stool of specification:Height Adjustment: Without Hydraulic,Frame and support made of CHROME PLATED MS TUBES,Chair Type:Non Revolving,Type of seating:Only seat,Pedestal base :Aluminium Die Cast 55 Suppling of Over Head Storage delite hi-tech of specification Material of Construction:ISI Marked, three layer Prelaminated particle Board conforming to Grade II Type III of IS 12823/2013 laminated with 0.6-0.8 mm thick lamination conforming to IS 2046/1995 and balancing lamination of 0.5 mm thick on the back side,Number of Shelves (Nos):2 Number of Doors (Nos) -2 ,Height in mm (±10 mm)-750,Depth in mm (±5 mm)-450 56 Suppling ofStainless Steel Name Plates, Monograms, Labels, As per BHEL ,Specifications :Stainless Steel Name Plates, Monograms, Labels, 57 Suppling of Aquaguard RO & UV both SS304 Drinking Water Coolers With Built In Water Purifiction System AquaguardR 58 Suppling ofStainless Steel External Branding Signage Boards, Size 22X6 Feet,Signage Printing-Single size vinyl print ,Material -Stainless steel ,Coating: Gloss or matte,Fabrication Specs-framing with one coat of red oxide & 2 coats of oil paint to avoid rusting 59 PROVIDING & SUPPLYING DIRECTOR DESKDIRECTOR TABLE STRUCTURE OF L SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2100MM(L)X 900MM(D)X 750MM(H) 50MM THICK TABLE TOP MADE OF PRELAMINATED PARTICLE BOARD WORK SURFACE WITH CLASSIC WENGE BROWN FINISH 2MM THICK PVC EDGE BANDING MADE OF SAME MATTE FINISH. SIDE PANNEL IS MADE OF 50MM THICK* PROVISION OF SIDE RUNNER OF SIZE IS 1200MM(L)X 400MM(D)X 760MM(H) ,(CCOMBINATION ONSTRUCTION BELOW TABLE TOP 1 KEY BOARD TRAY IN PVC WITH TELESCOPIC CHANNEL ON RIGHT SIDE IS MOVABLESIDE RUNNERHAVING 1 OPENABLE DOOR WITH 1 FIXED SHELVE, 1 OPEN BOX WITH 1 FIXED SHELVE UPPER SHELVE HEIGHT IS @ 320MM BELOW SHELVE HEIGHT IS @324@ + 3 DRAWERS (2 EQUAL DRAWERS + 1 FILLING DRAWER)PER DRAWER HEIGHT IS @ 184MM, FILLING DRAWER HEIGHT IS @ 303MM HAVE CENTRAL LOCKAND HANDLES WITH CASTORS .* MOBILE PEDESTAL OF SIZE400MM(L)X 530MM(D)X 671MM(H) ,PER DRAWER HEIGHT IS @ 186MM, FILLING DRAWER HEIGHT IS @ 195MM HAVING (2 EQUAL DRAWERS + 1 FILLING DRAWER) IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING.OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATEST , 60 PROVIDING & SUPPLYING* FIX CANTILEVER CHAIR * ALL OVER SIZE IS : 610MM(L)X 505MM(D)X990MM(H) , *THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR . IT WILL COMES IN MATTE BLACK FINISH FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS :CHROMEFINISH ARMS WITH PU PADDING .* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) . * SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORTbackrest support* ONLY SEAT SIZE IS 610MM(L)X 505MM(D)X485MM(H) & THE BACK SIZE IS 610MM(L)X 540MM(H) ,* BASE : CHROME FINISH TUBLAR FRAME OF CANTILEVER TYPE . 61 PROVIDING & SUPPLYING OFFICE DESK STRUCTURE OF RECTANGULAR SHAPE .PRIMARY WORK SURFACE OVER ALL SIZE IS 1200MM(L)X 600MM(D)X 750MM(H) 25MM THICK TABLE TOP MADE OF 25MM THICK PRELAMINATED PARTICLE BOARD WORK SURFACE WITH THE EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE WITH THE HOT MELT GLUE . MODESTY PANNEL MADE OF 18MM THICK, WIRE MANAGEMENT HOLE WITH PVC GROOMENT ON TABLE TOP.*CONSTRUCTION RIGHT SIDE OF TABLE TOP IS BASED ON A FIXED PEDESTAL3 DRAWERS & FROM LEFT SIDE OF TABLE TOP IS BASED ON 18MM THK ENGINEERED WOOD PVC EDGE BANDING PEDESTAL BACK,TOP,BOTTOM & DRAWERS ARE MADE OF 18MM THICK WITH 1 CPU TROLLY MADE IN BLACK METAL POWDER COATED.*FIXED PEDESTAL:L:410MM(L)X 580MM(D)X 750MM(H) ,IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. *THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823. 62 Suppling of Material & Subtype Solid Wood - Beech Wood Table Top Material Solid Wood,Leg Material Solid Wood Finish Glossy Colour & Colour Family Brown - Walnut Dimension (W)680mm X (D)530mm X (H)450mm Table Top Thickness 8mm,Size Compact, 63 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 838MM(L)X 305MM(D)X 1676MM(H) STEEL BOOKCASE HAVING 4 DOORS AND K. TYPE OF LOCK: THREE WAYBOLTING DEVICE CONTROLLED BY LOCK, THICKNESS OF MS SHEET USED FOR SHUTTER: 0.7 MM, THICKNESS OF MS SHEET USED FOR SHELF: 0.7 MM, THICKNESS OF MS SHEET USED FOR TOP,BOTTOM, BACK AND SIDES: 0.7 MM, MATERIAL OF HANDLE: CAST BRASS, THICKNESS OF TRANSPARENT GLASS IN SHUTTERS: 4.0 MM, THE COMPLETE STEEL STRUCTURE SHALL BE CONSTRUCTED BY WELDING AND PROVIDE FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 60-80 MICRONIN COLOR GREY-LIGHT GREY. 64 Suppling of 3 Seater Public Place Seating Chair of mildsteel with arm and backrest WITHOUT CUSHION DURIAN,THREE SEATERTYPE WAITING AREA CHAIR -NIXON/SS/3 MATERIAL : STAINLESS STEEL,SIZE 1820MM(L)X 690MM(D)X 790MM(H)COLOUR : SILVER/WEIGTH OF PRODUCT : 34 KG APPROX,* SUPPLYING AND PLACING IN POSITION OF A STAINLESS STEEL VISITOR BENCH OF SIZE IS 1820MM(L)X 690MM(D)X 790MM(H). THE COMPLETE STAINLESS STEEL BENCH HAS SEAT & BACK SINGLE SECTION. PER SEAT LENGTH IS @ 520 MM &SEATING HEIGHT IS @ 430 MM FROM GROUND . OWING TO THE SMOOTH FINISH, DURABILITY AND TENSILE STRENGTH BEAM STAINLESS STEEL MADE BY 1.6MM THICK.SEAT IS MADE BY 1.2MM THICK STAINLESS STEEL BORDER WITH CHROME PLATING FOR EVERY SEAT & BACK ; STAINLESS STEEL HANDLES CHROME PLATED & DIE PRESSED LEGS AT THE END OF CHAIRS.GROSS WEIGHT OF REGULAR 3-SEATER WILL BE 34 KG.THE STEEL GRADE 202 HIGH YIELD STRENGTH AS PER IS:513 & IS:304 GRADE. 65 PROVIDING & SUPPLYING ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE) 6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY. 66 PROVIDING & SUPPLYING * FIX CANTILEVER CHAIR PROVIDING & SUPPLYING* ALL OVER SIZE IS : 590MM(L)X 490MM(D)X940MM(H) ,*THE CHAIR MADE OF FULL LEATHERETTE IN BLACK COLOUR .IT WILL COMES IN MATTE FINSIH IN CONTEMPORARY STYLE .DETAILS :* ARMS : PADDED ARMREST.* USE OF PLY: SEAT & BACK PLYWOOD MADE OF 12 MM HOT PRESSED.* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT , * BACK : 35 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK . BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* ONLY SEAT SIZE IS 590MM(L)X 490MM(D)X450MM(H) SEAT HEIGHT IS @ 450MM .* BASE : 2 CHROME LEGS + BACK SIDE BOTTOM CHROME IN METAL . 67 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM). 68 SUPPLYING AND PLACING30 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated ParticleBoards Of Grade-II Type-II Of IS:12823/Latest (for 14 seater rate devided by 30X24} 69 SUPPLYING AND PLACING PREMIUM SUITESDIRECTOR TABLE STRUCTURE OF L-SHAPED DESK .PRIMARY WORK SURFACE OVER ALL SIZE IS 2400MM(L)X 2330MM(D)X 770MM(H) 45MM THICK TABLE TOP MADE OFSUPPLYING AND PLACING PRELAMINATED PARTICLE BOARD WORK SURFACE WITH RICH CHERRY FINISH SAME MATCHING EDGE BANDING MADE OF SAME RED CHERRY P.U POLISH.MODESTY IS DESIGNED WITH LEATHER PATCH.SIDE PANNEL IS MADE OF 36MM THICK .* PROVISION OF SIDE UNIT OF SIZE IS 1200MM(L)X 595MM(D)X 770MM(H) ,(COMBINATION CONSTRUCTION ON TABLE TOP WIRE MANAGEMENT 2 HOLE WITH SS GROOMENT & 1 HOLE WITH PVC GROOMENT ON TOP SIDE UNIT. BELOW TABLE TOP ONE KEYBOARD TRAY,IN SIDE UNIT BELOW THE TOP 1 KEY BOARD TRAY,1 OPEN BOX FILE ,1 DRAWER + 1 OPEANABLE DOOR SHELVE. * FIXED PEDESTAL OF SIZE450MM(L)X 400MM(D)X 690MM(H) , HAVING 3 EQUAL DRAWERS IN PROVIDED WITH CETNRAL LOCK FOR SECURITY AND HANDLES ARE PROVIDED FOR EASY OF OPENING. OVERALL CONSTRUCTION OF PEDESTAL IS 18 MM ALONG WITH FECIA OF DRAWERS. * ALL THE MDF BORAD ARE IS-14587-1998 WITH CONFIRM TO DIN 68861.ISO 9001- 2015 QUALITY CERTIFICATION CONFIRMING TO ASTM D 4499 STANDARDS FOR VISCOSITY AND THERMAL STABILITY . 70 SUPPLYING AND PLACING* HIGH BACK 360° DEGRE REVOLVINGCHAIR * ALL OVER SIZE IS : 673MM(L)X 508MM(D)X1270MM(H) , *THE CHAIR MADE OF FULL NATURAL LEATHER IN BROWN COLOUR . IT WILL COMES IN MATTE FINSIH EXTRA PADDED DESIGNED FOR MORE CONFIRMT AT WORKPLACE IN CONTEMPORARY STYLE . DETAILS :* ARMS : WOODEN ARMS WITH LETHER PADDING ARM REST ARE FITTED TO THE SEAT & BACK.* USE OF PLY: 12 MM THICK HOT PRESSED BWR PLYWOOD(IS GRADE - 303 FOR SEAT AND BACK) .* SEAT: 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN SEAT . * BACK : 40 ± 2 MM THICK POLYURETHANE FOAM WITH DENSITY 32 (±3) KG PER CU METER FOR BEST QUALITY CUSHIONING IN BACK .BACKREST SUPPORT FOAM DESIGN BASED ON SYMMETRICAL LUMBAR SUPPORT* MECHANISM : MULTI-LOCKING KNEE TILT MECHANISM .SEAT MAXIMUM HEIGHT IS 580MM & MINIMUM HEIGHT IS 500MM & BACK HEIGHT FROM FLOOR MAXIMUM HEIGHT IS 1270MM & MINIMUM HEIGHT IS 1219MM* GAS LIFT 80MM TELESCOPIC HAUDRAULIC * BASE : THE PRONG (BASE) IS MADE OF SOILD WOOD WITH POLISHEDAND FITTED WITH 5 NUMBERS. TWIN WHEEL CASTORS (CASTOR WHEEL DIA. 50MM) & 700MM PITCH CENTER DIA (740MM WITH CASTORS) . 71 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood Upholstery Material Leather,Seat Material Leather Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)1140mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 1 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 72 SUPPLYING AND PLACING Material & Subtype Leather - Semi Aniline Leather,Metal - Stainless Steel,Frame Material Solid Wood,Upholstery Material Leather,Seat Material Leather,Leg Material Metal,Finish Matte,Colour & Colour Family Beige - Mushroom,Dimension (W)2130mm X (D)1000mm X (H)940mm Mechanism Click Clack Mechanism,Seating Capacity 3 Seater Seating Height 430mm,Function Adjustable Headrest Size Grand. 73 SUPPLYING AND PLACING Rectangular CENTRE TABLE with Marble Top of 1219mmX711mm,(DAISY/CT (W)1300mm X (D)650mm X (H)450mm),Specifications:Number of storage under top No storage,Top material,Tempered glass,Frame material No frames,Dimension of Top (Length X Breadth, or Diameter) ±20mm,762mmX457mm,Height of centre table ±10mm,410,millimeter,Thickness of top material (+/-2 mm)- 8 millimeterThickness of frame material (+/- 1 mm)-10 millimeter 74 SUPPLYING AND PLACING 14 SEATER oval MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II 75 SUPPLYING AND PLACING 6 Seater Sofa Material & Subtype-Premium Leatherette,Frame Material Solid Wood,Upholstery Material Premium Leatherette,Filling Material Foam,Silicone Fiber,Seat Material Premium Leatherette-Leg Material Solid Wood,Finish Matte,Colour & Colour Family Brown -Coffee Brown Dimension (W)4865mm X (D)960mm X (H)820mm,Seating -Capacity 3 Seater,seating Height 475mm,Size Standard 76 SUPPLYING AND PLACING9 SEATER U -* PROVIDING & SUPPLYING U - SHAPE MODERN DESIGN CONFERENCE TABLE & IN BETWEEN U SHAPE TABLE TOP LENGTH IS @ 4650 MM, TABLETOP OFFERS YOU A GENEROUS WORKSPACE,DESK PRIMARY WORK SURFACE USE PREMIUM QUALITY MATERIALS OVER ALL SIZE IS 4650 MM(L)X 600MM(D)X 750MM(H) TABLE TOP MADE OF 36MM THICK WHICH GIVE MORE SURFACE AREA FOR WORK ,MACHINE MADE MODULAR FURNITURE MADE PRELAMINATED PARTICLE BOARD OF GRADE II TYPE III OF IS 12823/LATEST,* CONSTRUCTION PROVISION OF CONFERENCE TABLETOP SUPPORTED WITH 18MM THICK SIDE PANNELS IN BROWN-BLACK OAK COLOUR MADE BY PRELAMINATED PARTICLE BOARD AND BELOW THE TOP 18MM THICK PRELAM PARTICLE BOARD MODESTY PANEL.OUR WORK SURFACE FURNITURE IS FINISHED WITH EXPOSED EDGES SHALL BE FINISHED WITH 2MM THICK EDGE BINDING TAPE OF MATCHING COLOUR AND SHADE,FIXED WITH HOT MELT GLUE. * THREE LAYER PRELAMINATED PARTICLES BOARD(WOOD PRODUCT) OF GRADE II TYPE III OF IS 12823/LATESt. 77 * SUPPLYING AND PLACING THREE SEATER EXCLUSIVE PREMIUM LEATHERETTE MODERNIST CLASSIC DESIGN LOUNGE SEATING SOFA SIZE IS 1650MM(L) X750MM(D)X 710MM(H) WITH KILN-DRIED WOOD FRAMING MAKES IT WARP AND SCRATCH RESISTANT,COMFORTABLE SEAT DEPTH & HEIGHT DESIGNED KEEPING MODERN INDIAN LIFESTYLE IN MIND,WRAPPED IN BUTTERY-SOFT PREMIUM LEATHERETTE, THE PANELLED BACK AND CUSHIONED ARMRESTS ENCOURAGE LOUNGING,DESIGNED WITH MODERNITY & ELEGANCE, CHOOSE THE OPTION THAT SUITS YOUR HOME.* COMBINATION CONSTRUCTION STRUCTURE ARE MADE INMOISTURE CONTENT SHALL BE LESS THAN (10-12)%. THICKNESS OF PLYWOOD USED (MM) SHALL BE 12 MM GRADE IS 303 INDIAN STANDARD FOR COMMERCIAL (COMMON) AND MOISTURE PROOF PLYWOOD (TENTATIVE).UNDERSTRUCTURE FRAME SHALL BE CONSTRUCTED FROM 18 MM THICK KILN-DRIED GERMAN BEECH WOOD FRAMING IS HIGHLY DURABLE. THE COMPLETE STRUCTURE SHALL BE COVERED BY P.U.FOAM FIXED WITH ADHESIVE GLUE ,THE FRAME SHALL BE PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING 25 +/- 5 DENSITY IN SEAT IT SHALL BE STACK FOAM OF 40MM THIK,40MM THICK BACK FOAM HAVING 25 +/- 5 DENSITY FOAM USED ,THERE SHALL BE CUSHION ARM 40MM THICK PROVIDED PADDED WITH HIGH RESILIENCE POLYURETHANE FOAM HAVING DENSITY 25 +/- 5. THE COMPLETE STACK FOAM STRUCTURE SHALL BE COVERED WITH PREMIUM LEATHERETTE IN BROWN-CAMEL BROWN COLOUR, IT COMPLEMENTS THE MODISH SLEEK STEEL . ( SEAT : 545 MM(D) X 410MM(H) , ARMS HEIGHT @ 610 MM /BACK HEIGHT @ 290 MM) 78 SUPPLYING AND PLACING Wooden Acoustic Wall Cladding/Panelling- Providing and fixing in position wood wall paneling of width 128mm, thickness of 16mm and length 2440 mm made up of high density fiber board with minimum density of 800 Kg/m3 substrate with a laminated facing/wood veneer as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 2mm groove & 14mm pitch. The panels shall have fire resistance of Class 1, BS 476 part 7. The edges of the panels shall be tongued-and-grooved to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick glass wool layer as directed by the Engineer-in-Charge. The panel shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install Gel stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall horizontalty using screws and plugs at spacing of 600mm centre-to-centre, Screw the aluminium channel (keel) vertically on channeled G.I stud 600mm 79 SUPPLYING AND PLACINGBlackout roller blind,Specifications-Mounting arrangement profile systems – clicked on hidden mounting clipsTypes of roller blind,Blackout roller blind-Shading solutionSingle roller blind – utilise one layer of fabric (called outer layer Operating mechanism-Side winders (that lock the manually adjustable blinds at different levels with the internal ratchet and tension adjusted by spring inside the tube) 80 Providing and Fixingof Drawers in Brown Finish ,Specification-Material : High QualityParticle board Dimensions (In Centimeters)-H 91 x W 90 x D 44 Dimensions (in Inches)-H 36 x W 35.5 x D 17.5 Primary Material-Engineered Wood as per Engineer incharge 81 Providing and FixingSTAGE - Providing & fixing raised stepped floor (Stage) Consisting ofMS Tabular frame work ofPipe Section (HOT ROLLED/COLD ROLLED) size 50mmx 50mmx2.0mm.tk. duly Painted with one coat of Red Oxide steel Primer, fabricated in module of 600 x 600 mm frame gid (as per Design or as instructed) with support of same section Legs /frame fixed on existing floor from base and raised at height minimum 150mm to max 200mm as required, from Existing floor. Vc providing and fixing 18mm thick heavy duty high density (1450 kg/cum) cement fiber Board fixed by SS. Screw on Horizontal & Vertical Surface on Existing Framework with one coated cement primer on Board and covering Board from top and sides by 2mm thick Vinyl flooring of approved make,colour and texture to be layed and fixed on sub floor smoothly finished and levelled by recommended adhesive cutting fixing and including covered raised portion of Board from all sides etc. complete,suitable for use up to the satisfaction of Engineer- in-charge.Design as approved by Engineer-In-charge. Base ofthe Vertical Legs of M.S. Frame (COLD ROLLED/HOT ROLLED) 82 Providing, fixing & installation MICROPHONE:-Flat frequency response across the vocal range for uncolored sound interchangeable cardioid, supercardioid, and omnidirec- tional cartridges that provide choices for applications Sleek, low-profile design for unobtrusive appearance Balanced transformerless output for increased immunity to noise over long cable runs-Compact Cinema Surround Speaker for Digital Applications:- Frequency range: 50 Hz to 20 kHz • High sensitivity: 91 dB SPL, IW @ 1m (3.3 ft) High power handling capability: 150 watts, continuous pink noise Internal Thermomaster• technology allows for unprecedented high frequency power in a compact, molded enclosure Convenient mounting design supports JBL QuickMountre, OmniMount• or APC multimount brackets Special cabinet shape incorporates 20• angled front baffle SMPTE/lS02969 Curve X high frequency de-emphasisMixer 8 input mono mixer XLR input switchable between mic and line level +/- 15dB gain trim control per input Input 1 is switchable to be pre/post master 24VDC or mains power operation Optional remote VCA/Tone generator/ Muting boards available • Whisper quiet operation 83 Supply, Installation, Testing and commissioning of microphone Delegate unit. 84 Supply, Installation, Testing and commissioning of microphone Chaiman unit, 85 Supply , Installation , testing and commissioning of Factory made 1.4HDMl Cable along with connector (15mtr length) 86 Supply , Installation , testing and commissioning of Factory made VGA along with Connectors.(15mtr length) 87 Supply , Installation , testing and commissioning of Factory made RCA along with Connectors.(15mtr length) 88 Supply , Installation , testing and commissioning 40W power Amplifier of following features:- Rated output wattage - 240W, amplifier output IOOV, 70V and 4-16 ohms transformer isolated speaker outputs, Supply input 0.775 v (OdB) unbalanced, 10k ohms, XLR and phone jack frequency 89 Supply , Installation , testing and commissioning10W wall mount speaker- Supplying, installation, testing and commissioning of 240W power amplifier with following features:- Rated output wattage- 240W, amplifier output 100V, 70V and 4-16 ohms transformer isolated speaker output, Supply input 0.775 v (0 db) unbalanced, 10k ohms, ZLR and phone jack frequency response 50 - 18000 Hz, +/- 1.5 dB, S/N ratio > 105 dB. 90 Supply , Installation , testing and commissioningCONFERENCE CONTROL UNIT, line Output 1 17.5V DC/3a Max.; -34dBV (20mV), line Output 2 17.5V DC/3a Max.; -34dBV (20mV), power Output 50w rMS at 2% THD, 90w Max. inputs 3xMic 0.65mV/4.7kQ Ixaux IOOmV/470kQ Frequency response 60-14,000Hz (± 3dB) 91 Supplying of Material & Subtype Engineered Wood Finish Matte,Colour & Colour Family Brown - Wenge Dimension (W)800mm X (D)384mm X (H)1970mm Size Standard,Style Contemporary,Assembly Type Knock Down 92 Supplying of Powder Coated Extruded Aluminium Sections Hybrid panel based system (combination of sliding & snap fit tiles) Modular Work Stations 93 Supplying of11 SEATER U - shape MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823 94 SUPPLYING AND PLACINGSLOTED ANGLE RACKOF SIZE 900MM(L)X 450MM(D)X 1800MM(H) SLOTTED ANGLE RACK (OPEN TYPE)6 SHELVES INCLUDING TOP & BOTTOM,ANGLES : 40MM X 40MM X 2MM(THICK).,SHELF : 36X15X1MM CRCA SHEET.IN COLOR GREY, 95 SUPPLYING AND PLACING : METAL STORAGE OF SIZE 900MM(L)X 450MM(D)X 1980MM(H) BODY MADE OUT IN 22 GAGUE(0.8MM) & DOOR 19 GAGUE(1 MM) CRCA SHEET. 4 ADJUSTABLE SHELVE IN 22 GAGUE(0.8MM) & PEDESTAL 18 GAGUE 1.2 MM CRCA SHEET. HAVING FOUR SHELVES MAKING FIVE COMPARTMENT, UNIFORMLY DISTRIBUTED LOAD CAPACITY OF EACH SHELF SHALL BE 60 KG MAXIMUM,FITTED WITH MS BODY LOCK & HANDLE. FINISHING WITH EPOXY POLYESTER POWDER COATED TO THE THICKNESS 50-60 MICRONS(+/-5 MICRON)IN COLOR GREY-LIGHT GREY. 96 Providing and fixing e Slimline Tower AC (2 Ton White),Availability of BIS/ISI Mark Certification for Split AC Floor type-Yes,Technology of air conditioner,Non Inverter AC-Nominal Marketing capacity as per BEE Star Rating Label (hint: 1 Ton = 3000 Kcal/Hr, Tolerance +/- 10%) (in Ton)-3 BEE Star rating of the product (Central Ministries/Departments while procuring shall ensure that the items carry 5 star (under normal conditions where annual usages is expected to be more than 1000 hrs),3 Star (where usage is Limited)or higher Star R NA- Star rating for the capacity of >10,465 Watts (>9,000 kcal/hour) 97 Providing & Fixing 2.0 mm thick homogenous single layered vinyl flooring. The flooring shall be laid in manner to provide comfortable and jerk free surfaces including material, adhesive, scaffloding and lead and lift at all floor level etc. complete as per direction and approval of Engineer-in-charge. 98 Providing & Fixing Wiring for Primary Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insuate copperconductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point With 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Switch with Front plate and metal Box with all Accessroies for users. 99 Providing & Fixing Wiring for Secondry Raw Power point 2 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 2 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with all Accessories. 100 Providing & Fixing Wiring for Primary Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 101 Providing & Fixing Wiring for Secondry Raw Power point 1 sets of 6 Amp Switch-Socket Outlet with 2.5 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq.mm FR PVC insulated copper conductor Wire. Including Providing and fixing 1 nos 6A Socket controlled by 1 nos 6A Switch with Front plate and metal Box with allAccessories. 102 Wiring for Primary Power point 6/16 Amp Switch-Socket Outlet with 4 sq.mm FR PVC insulated copper conductor wire in surface / recessed 25mm medium class PVC conduit, earthing the third point with 2.5 sq-mm FR PVC insulated copper conductor Wire. Providing and fixing 1 nos 6/16A Socket controlled by 1 nos 16A switch with front plate and metal box with allAccessories. 103 Providing & Fixing Standing Bathtubs Specifications:Size:1690x800x445/565mm Free Standing Bath Tub with Over Flow & Drain 104 Providing & Fixing Corazzin Garden Patio Seating Chair and Table Set Outdoor Balcony Garden Coffee Table Set Furniture with 1 Table and 4 Chairs Set (Black) 105 Providing & Fixing Reliable Drapes Cotton Plain Door Curtains Reliable Drapes,Cotton GSM Quality-220,Lining included-No, Pack of-1,Length (Ft)-8.5-9,Width (Ft)-3-3.5 106 Providing MattressDimension 1981 mm X 1829 mm,Thickness of Core Layer (Height of Spring) 200 mm,Thickness of Felt (±1 mm) for Bonnell Spring 12 mm,Thickness of Top Layer (±2 mm)-50 mm Thickness of Bottom Layer (±2 mm)50 mm,Type of Spring in Core Layer Bonnell Spring (with cotton felt),Material of Top Layer Visco Elastic PU Foam (Memory Foam) 107 ProvidingCotton Pillow 33 cm x 56 cm (COTTON PILLOW)of Specification-BIS Marking ( For Body Casing fabric )-No Logo Marking-No,type of Logo,Stitched ( Patch Logo ),Agree to provide 108 Providing240 centimeter x C1112M 135 centimeter (L x W) Printed Bed Sheets(BED SHEET ):Technical Specification of the Product-Sheeting, Tickings and Bedsheets (V2) as per IS 175 BIS Certifcation-No,VarietyVariety - 2,Process of colouring Dyed,Matching Pillow cover 109 Providing 25 liter 3 Star Water Heater,25 Ltr 5 Star Water HeaterCapacity litres (Litres),BEE Star Rating (Central Ministries/ Departments while procuring shall ensure that the items carry 5 star or higher Star Rating of BEE)-3,Availability of Type Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification-No,Material of Inner Container Vitreous enamelled inner tank conforming to IS-13273 110 Providing Wall Mount Mesh Filter T-Shapped Kitchen-Chimney Material of Blower Body-Aluminium,Material of Blower Blade Aluminium,Material of Exhaust pipe-pvc,Filter Material,Stainless Steel,ShapeT-Shapped,Filter Type,Mesh Filter,Control Panel Type Soft Touch,Mount Type,Wall Mount 111 Providing Potable Water Purification System With Inbuilt Water Cooler. RO UV Aquaguard(Hot & Cold uv+ ro) Specifications-Flow rate (Litres/hr.)-12,Cold water storage capacity (Litres)-11 liter,Cooling capacity (litres/hr.)-4,Hot water storage capacity (Litres)-1.5 liter,Heating capacity (litres/hr.)-1.5,Cooling power consumption (Watts)-230,Heating power consumption (Watts)-550. 112 Providing300 L 3 Star Frost Free Double Door Refrigerator, of specification Cooling type:Frost free,Exterior body built:steel,Shelf material -Toughened glass,Voltage Range-160-300V,frequency-50 Hz 113 Providing900 mm wide 2000 mm high Metal Shelving Racks,Specifications :Type-OPEN TYPE Number of Shelves/Compartments (Top / Ceiling Shelf - not to be counted)-4,Shelves Material-0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513,Depth in mm (±5 mm)-400,Width in mm (±5 mm)-900,Height in mm (±5 mm) 2000 114 Providing and fixing Drawers of Specification of Dimension (in cm)-H91 X W90 X D44in Brown Finish,primary material-Engineered wood,Weight 49.45kg 115 Providing and fixingDressing Table With cupboard and open shelves-Design of Dressing table With drawers,cupboard and open shelvesBase of dressing table Rectangular wooden frame Number of side mirror-1 number, Material specification-Prelaminated particle board of grade II type III of IS 12823/Latest.both side laminated. outer side laminated with shade matching with top shade and fascia shade and having balancing laminate of 0.5mm thick on other side Material thickness of complete body, Fascia and drawer/cupboard-19 millimeter,Material thickness for back, partition and drawer /cupboard bottom ± 2mm,19 millimeter 116 Providing and fixing Material & Subtype Solid Wood - Rubber Wood Table Top Material Solid Wood-Frame Material Solid Wood,Finish Glossy,Colour & Colour Family Brown - Walnut Dimension Of Table (W) 600mm X (D) 600 X (H) 610mm Dimension Of Chair (W)640mm X (D)530mm X (H)560mm Size Standard 117 Providing and fixing Wooden Double Bed Storage Box Opening From Material of Mattresses Panel-Other wood, Material of Bottom Panel of Storage Box-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Front, Back and side Panels Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Headrest Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest Material of Legrest-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest,Type of Bed-Wooden Double Bed Material of Bed Frame-Three layer prelaminated particles board (Wood product) of grade II type II of IS 12823/Latest 118 Providing and fixing 1 Seater Sofa With Leatherite Cover Sofa Set is Foldable to use as bed-No Backrest Cushion Material-Foam,density of Cushion of Backrest Material (Kg/Cubic M)-40 Covering Material for Seat and Backrest Fabric Frame Structure Material and size (±1 mm) Any other wood of minimum 25 mm thickness Seat Cushion MaterialFoam 119 Providing and fixing 8 SEATER Rectangular MEETING TABLE with table top of Three Layer Prelaminated Particle Boards Of Grade-II Type-II Of IS:12823/(Elanor Marble 8 Seater Dining Set) 120 Providing and fixing MODULAR TABLE L X D & H 2000 millimeter X 450 millimeter 700 millimeter (Alice TV Unit marble),Sprcification-Mode of Supply of modular table Knocked Down to be assembled at consignee site by the Seller Storage Provided one side,Number of storage unit-triple storage,Table Top material and thickness ±3mm-25mm thickness three layer pre-laminated Particle boards (Wood Product) of grade II Type II of IS 12823 Latest Gable end and modesty panel material and thickness-18 mm thickness three layers pre-laminated Particle boards (Wood Product) of grade II Type III of IS 12823 Latest 121 Supplying of Library Management Department. and NDL Softwares,Server Machines, Air-Condition Systems,Xerox Machines,Lamination Machines, CONNECTION)Binding Machines,Furniture/Furnishing. Computers, Printers,Computer System(with Internet Connection) 122 Supplying of Printer of Specification A Printing Technology Laser-Cartridge Technology,Composite Cartridge,Type of Printing Mono,Paper Size-A4 Print Speed per minutes per Department Incharge 123 Supplying of XEROX Machine(standard company) Type of MachineMultifunction Machine,Print Technology-Laser Type of Printing-Mono,Cartridge Technology Separate Drum and Toner (Dual Component) Platen/Flatbed Size-A3/A4,Paper Size (Original/Image)A3/A3 RAM size (MB)-4096as per Department incharge 124 Supplying of Determination of wavelength of He-Ne Laser light using Grating(Specification- Output Power: up to 15mW, CW - Wavelength: 632.8nm,* Mode Structure: TEM00 (>95%)* Beam size: <= 1mm* Beam Divergence: <= 1.5 mrad* Polarisation: Unpolarised, Vertical Polarisation. complete set up as per Department incharge 125 Supplying of Brewsters Law using spectrometer(Brewsters angle apparatus differ goniometer digital research bench polarizer analyser with rail type bench abron). complete set up as per Department incharge 126 Supplying of Determination of wavelength of Sodium light using Michelson interferometer(Power-3 kW,Usage-Physics Lab,Material-Mild Steel,Power Source,Electric Voltage 240 V). complete set upas per Department incharge 127 Supplying of Determination of wavelength of Sodium light using FabryPerot interferometer complete set up of Specification Flatness of Reflective Mirrors-λ/20 Diameter of Reflective Mirrors-30 mm Reflectance of Mirrors-95% Effective Travel of Preset Micrometer~ 3 mm Min Division Value of Preset Micrometer-0.01 mm Travel of Fine Adjustment of Movable Mirror-1.25 mm Resolution of Fine Adjustment-0.0005 mm Low-Pressure Sodium Lamp-20 W as per Department incharge 128 Supplying of Resolving Power of Telescope complete set up (specification Color-BlackMaterial-Plastic as per Department incharge) 129 Supplying of Resolving Power of Prism(Resolving power of telescope assists the user to know the basic principle of telescope. Fabricated using excellent quality metals, glass and plastic material, it is widely used instrument in scientific lab of colleges and research centers. It is known for accurate calculation and longer service life) complete set up as per Department incharge 130 Supplying of Production and analysis of Polarised light using half and quarter wave plate(Usage/Application Laboratory Voltage-230 V,Color-Black,Material-SS). Complete set up as per Department incharge 131 Supplying ofLogarithmic Amplifier(Built in power supply : +15V & -15V DC,Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet,Weight : 2KGS APPX) complete set up as per Department incharge as per Department incharge 132 Supplying of Zener diode characteristics & voltage stabilizer. Complete-Specification:(Voltage-240 V Frequency-60 Hz,Display Type -Analog)in all respect as per Department incharge 133 Supplying of FET characteristics complete up(Technical specifications-Inbuilt variable, overload & short circuit protected DC regulated power supplies of 0- 5 volt & 0- 15 volt.Voltmeter & ammeter are mounted on the front panel.One FET.Highly insulated front panel .Trainer helps to demonstrate the working principle of FET.Set of required number of patch cords.Multi - colored sockets are used.Housed in an elegant powder coated metal cabinet.Strongly supported by a comprehensive instruction manual complete with theory and operating details.LED indication for supply “ON” to work on 220V AC Mains.) as per Department incharge 134 Supplying of MOSFET characteristics complete set up(Specificaion:Power-AC Mains,Usage/Application-Laboratory Type-Analog,Material-plastic,Power Supply-ac mains, as per Department incharge 135 Supplying of UJT characteristics complete set up(Specification-Usage/Application-laboratory,Type-Analog,Display Type-Analog meters,Power Supply-ac mains)as per Department incharge 136 Supplying of Transistor biasing (CE mode)(Specificaion-Operating Power Supply-220VAC On Board Power Supply 0-1VDC & 0-10VDC Experiment Input & Output Char In CB & CE Mode OF PNP Tr.Meter Type Analog / Digital)set up as per Department incharge 137 Supplying of Characteristics of SCR(SpecificationUsage/Application-laboratory Type-Analog Automation Grade-Manual ,Power Supply-ac mainscomplete set up as per Department incharge 138 Supplying of Basic Logicgates and Universal gates. Operating Supply Voltage 230V,Logic Family-DIGITAL,Number of Inputs per Gate-2,Usage Laboratory,Material-ELECTRONIC Complete set up in all respect as per Department incharge 139 Supplying of Op-amp Integrator &Differentiator. Complete set up in all respect :Product Specification:Type-Analog Material-Metal,Automation Grade=-Manual,Color-black with multicolour PVC front panel,Power Supply-230,Capacity--5,connector Type-patch cord sas per Department incharge 140 Supplying of Half Adder, Full Adder and 4-bit binary Adder. Complete set up in all respect (Product Specification:Type-Digital,Display Type-Digital Interface--NO Material-ABS,Display-Digital,Pulse Generator-50Hz Variable Dc Output-no)as per Department incharge 141 Supplying of G. M. Counter for 6 digits GM counter with built in power supply complete set up(G.M.COUNTER: COMPLETE WITH INBUILT POWER SUPPLY EHT 250-1200v Workable on 220v. 50Hz., Power consumption 8W approx. STOP, START, RESET switches. Counts Capacity : 6 DIGIT COUNTING SYSTEM, Preset time : 3 DIGIT PROGRAMABLE TIMER WITH DIGITAL DISPLAY. 3 ½ Inbuilt Digital Volt Meter for GM TUBE Voltage. G.M.TUBE: END WINDOW G.M.TUBE MOUNTED IN ACRYLIC STAND. WITH ‘LEAD’ AND ‘ALUMINIMUM’ ABSORBENTS, Radioactive Source: ONE RADIOACTIVE SOURCE BETA or GAMMA (in Lead Container and wooden Box) SOURCE, . Dimensions : 460X370X230mm.(Complete instrument is HOUSED in corrugate box with Export Packaging) Wight : Total weight of the Instrument is 5.5kg.) as per Department incharge 142 Supplying of Measurement of Dielectric constants of solid and liquid samples complete set up(It Consists of following partsRF Generator (9-10MHz Approx) Micro Ammeter (Range 0-50mA) Potentiometer for Sensitvity Selection Fixed Capacity (Metal) Variable Gang Capacitor Socket for test Capacitor & Variable Capacitor brought out at front panel One Solid bakelite plate to be insert in gap of test capacitors)as per Department incharge 143 Supplying of Study of Dielectric constants and Curie temperature of ferroelectric ceramics Complete in all respect(Specifications Temperature Range : Ambient to 200°C,Display : 31/2 digit, 7 segment LED with autopolarity & decimal indicationResolution : 0.1°C,Accuracy : ±0.5°C (typical),Stability : ±0.1°C Power : 150W,(ii) Digital Capacitance MeterThis a compact direct reading Instrument for the measurement of capacitance of the sample. Specifications,Range : 50-6000 pf,Resolution : 1pf Display : 3½ digit, 7 segment LED, Typical results obtained with the above set-up are as shown in the graph) as per Department incharge 144 Supplying of Determining Optical constants of a metal by reflection of light Complete in all respect (Specification-Power-AC Mains,Usage/Application-Laboratory,Type-Digital Material-Metal,Automation Grade Manual,Color-White Power Supply-AC Mains,Display Type-Digital) as per Department incharge 145 Supplying of Lattice dynamics kit with frequency meter (Technical Specifications: Audio Oscillator 100 khz,Built in Power Supply and Output Stage to match the Impedance of Simulated Lattice,Lattice DynamicKit consists of Transmission line, which Simulates One-Dimensional Mono-AtomicandDi-atomicLattices,. LCD Based Frequency Counter is Provided on panel to Measure Frequencycomplete set up as per Department incharge 146 Supplying of BCD to seven segments complete set up(Specification:Built in power supply : +5V DC Mains : 230V AC Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX) as per Department incharge 147 Supplying of Monostable Multivibrator using Oscilloscope (CRO) complete set up (Specification:Usage/Application Laboratory Packaging Type-Corrugated Box,Connector-2mm sockets Frequency Range -50Hz) as per Department incharge 148 Supplying of Bistable multivibrator using Oscilloscope(CRO))Technical Specification:(Built in power supply : +12V & -12V DC Mains : 230V AC,Dimension : 27CMS X 17CMS [metal cabinet] Weight : 2KGS APPX)complete set up as per Department incharge 149 Supplying of Pulse code modulation and demodulation complete setup (Product Specification,Type Laboratory Trainer Kit Usage/Application-Laboratory,Accuracy-+/- 10%,Frequency-50 Hz Input Voltage-220V,Packaging Type-Corrugated Box,Power Source-ElectricShape-Rectangular,Material-ABS or Metal Cabinet)as per Department incharge 150 Supplying of Addition, Subtraction, Multiplication using 8086 microprocessor(Product Specification,Usage/Application-LaboratoryType-Fully Automatic,Automation Grade-Semi-AutomaticClock Frequency-Yes,Color-Green,Display-Digital Packaging Type-Corrugated Box, Power-200-400 Weight 2 Kg) as per Department incharge 151 Supplying of Thevenin theorem, (THEVENIN’S AND NORTON’S THEOREM APPARATUS,Technical specifications Inbuilt fixed DC regulated power supply of 12 volt. Voltmeter & ammeter are mounted on the front panel. Resistive network is used in the circuit. Circuit diagram is printed on highly insulated front panel . Trainer helps to demonstrate the working principle & verification of Thevenin’s & Norton’s Theorem based on resistive circuit. Student can calculate & measure the value of current & voltage for different load circuits. Calculation of power consumed by the circuit. Facility for connecting external Power Supply. Set of required number of patch cords. Multi - colored test points are provided in the circuit to observe voltages at different points. Housed in an elegant powder coated metal cabinet. Strongly supported by a comprehensive instruction manual complete with theory and operating details. LED indication for supply “ON” to work on 220V AC Mains. Circuit protection through glass fuse)Complete set up as per Department incharge as per Department incharge 152 Supplying of Active filter set up(Product Specification Operating Temperature-0-50,Frequency (Hz) 50,Condition-New Temperature (deg. Celsius)-50,Usage/Application Industrial, Educational, Residential, Commercial) as per Department incharge 153 Supplying of A to D counter type complete set up (Product Description-M-32 AD M-16 AD,Input AD: 1/4 TRS jack and 25 pin D-sub, servo balanced, completely symmetrical audio path, Output AD: 4 x ADAT optical, 1 x MADI optical/coaxial,Dynamic Range AD: 113 dB RMS unweighted, 116 dBA,THD AD: < -110 dB (< 0.00032 %),THD+N AD: < -104 dB (< 0.00063 %) Crosstalk AD: > 130 dB,Input level for 0 dBFS: +24 dBu, +19 dBu, +13 dBu,Frequency response AD, -0.1 dB: 10 Hz - 23.2 kHz (sf 48 kHz),Frequency response AD, -0.5 dB: < 5 Hz - 45 kHz (sf 96 kHz) Frequency response AD, -1 dB: < 5 Hz - 80 kHz (sf 192 kHz) Sample rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz, variable (Sync/WC),Jitter: Typical < 1 ns for internal, Word Clock, ADAT and MADI input Jitter sensitivity: all PLLs operate error-free even at 100 ns,Jitter suppression: > 30 dB (2.4 kHz),Power supply: Internal switching mode PS, 100V - 240V AC, 60 Watt Dimensions: (WxHxD) 483 x 88 x 200 mm)as per Department incharge 154 Supplying of Determination of Plancks constant(1. 1 0-2V D.C. at 20mA Variable Power Supply. 1.2 Digital Panel meter 3½ digits range 2mA. 1.3 Digital Panel meter 3½ digits range 2 volt 02 Lamp House: 100W Bulb with stand 03 Vacuum Type Photo Cell : Mounted in a Iron box. 04 Three different colour optical filters 05 Adequate no. of patch cords stackable 4mm spring loaded plug length 50cm. 06 Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.) as per Department incharge 155 Supplying of Determination of Energy Band Gap using Four Probe method(Product Specification:Type-Energy Band Gap Usage/Application-Laboratory,Connector-4mm Banana Socket Frequency-50Hz) as per Department incharge 156 Supplying of Determination of Hall coefficient and Hall angle in Hall-effect(Product Specification,Display Type-0-20V DC, 0-5 A, digit LED, Primary safety socket,4mm Electro Magnet Coils 500 T, Voltage resolution -0.1V,Current Resolution 0.1 A) as per Department incharge 157 Supplying of Determination of magnetic susceptibility using Guoys method(Usage/Application Physics Laboratory Type Of Instruments-Magnetic Susceptibility Gouys Balance Method Experiment Setup,Power-230V , 50Hz, +-10% Display Type-LED Type) as per Department incharge 158 Supplying of Study of absorption pattern of a given sample using FTIR spectrometer(Product Specification,Detector-High performance pyroelectric infrared detector,Weight-15 kg Software-1,Voltage-100-240V AC,Electronic System-24bit A/D converter at 500KHz, USB 2.0,Wavenumber Range-7800~350 cm-1Power-100-240V AC,50/60Hz,Signal Noise Ratio-30000:1 (resolution@4cm-1 , sample and background scan for 1 min@2100cm-1 ),Light source-Long life, steady state infrared emitter Beam splitter-coated KBr,Resolution-1 cm-1,Dimension-430mm x 360 x200) as per Department incharge 159 Supplying of LCD Projector and smart board (Product Specification,Projection Distance-<1 m Resolution-WXGA,Lamp Life-5000/9000/10000 HOURS Screen Size-100,Display Type-LCD,Dimensions-400X367X149MM Connectivity Type-Dual HDMI, HDMI,Brightness-2000-4000 Lumens Color-White) as per Department incharge 160 Supplying of Desktop(ntel Core I3/ 10th Gen/ 4GB RAM/ 1TB HDD/ DOS/ NO DVD/ 19.5 Inch Monitor/ 1 Year Warranty) as per Department incharge 161 Supplying of Printer(Product Specification,Printer Type-Ink Tank Color Output-Color,Print Speed-22 ppm,Paper Size-A4,Dimension-403 x 369 x 150 mm,Weight -6,Warranty-One Year or 50,000 pages which ever is earlier) as per Department incharge 162 Supplying of Printer (Product Specification Printer Type-Inkjet Color Output-Color | B&W,Print Speed-10,Paper Size-A4,Connectivity-USB,Dimension-377 x348 x179,Weight-3.9 Print Volume-any)as per Department incharge 163 Supplying of XEROX Machine (Product Specification,Functions-Photocopy,Supported Paper Size-A3,Supported OS-Windows 10 Color Output-Black & White,Number Of Trays-1,Item Color-Black & WhitePrint Speed-22 PPM,Weight-40 kg,Print Technology-Laser Input Tray Capacity-350 sheets,Warm-Up Time-5.6 Sec,Duty Cycle-80000 / Month,Resolution-600 x 600 dpi Connectivity-Ethernet & USB,Duplexing-Yes)as per Department incharge 164 Supplying of computer system with internet connection,PC Specifications to be followed :Processor Intel Core i5(10th Gereneration or newer ),RAM-8 GB or Higher HDD:512 GB,SSD,Monitor 24 LCD Monitor .OS:Windows 10 Professional ,Anti virus:User Licence for one year as per Department incharge 165 Supplying of Laptop (with Internet connection),Processor intel Core i5(11th Generation or newer),RAM 8 GB or higher HDD:512 GB,SSD Monitor 14 screen ,OS Windows 10 Professional ,Antivirus :User Licence for one year 166 Supplying of LCD Projector (Specification-Brightness:2000-4000 Lumens,Resolution-FULL HD 1080P,Connectivity Type-Dual HDMI, HDMI Display Type-DLP,Power Supply-100-240V Portable-Yes) as per Department incharge 167 Supplying of Smart Board (Frame Material-Aluminium Usage/Application-School, Education, etc,Effective Touch Area-72 x 48 inch Material-Ceramic Input Method-USB Power Consumption-150 - 220 W,Shape-Rectangular) as per Department incharge 168 Supplying of MS Suite Software(Specification-Microsoft Office Software,Operating System:For Windows,Brand:Microsoft )as per Department incharge 169 Supplying of Adobe Photoshop Software(Specification -Graphic Design and Photo editing,Licence-1 yea) as per Department incharge 170 Supplying of windows10 OS Software(Specification-License Duration-Life Time,Architecture-32/64 Bits,Operating System For WindowsAlso Provides,Windows Operating System,Provide Installation Service-Yes Support 24/7 (Live Rep)) as per Department incharge 171 Supplying of Laptop of 11th Generation intel core i3,1115G4 processor (6 MB Cache up to 4.1GHZ)windows 10 Home Single language English,intel UHD Graphics with shared graphics memory 8GB ,8 GBX1,DDR4,3200 MHZ,512 MB,2 PCLeNVMe Solid state drive pebble (Top colour is pebble colour,Base and palmrest are black colour as per department incharge 172 Supplying of Desktop of 10th Generation intel core i5-10500T (6 CORE,12MB Cache 2.3GHZ to 3.8GHz,35W ),Windows 10 Pro (64 Bit )English,intel integrated graphics),8GB ,1X8 GB,DDR4 non-EC0C Memory,2.5 inch TB 7200 RPM ,SATA Hatd disk drive 5480AJO 23.8 FHD 1920X10080 ips non touch,Antiglare camera,integrated graphics,Bronze 1505w PSU as per department incharge 173 Supplying of Printer (Specification:Item Weight-12 Kg,Package Dimensions-60 x 56.5 x 38 cm,Connectivity Type-Wi-Fi Operating System-Windows)as per department incharge 174 Supplying of Fumehood(Specification:Type-exhaust,LED-Tube fitting,Power-230 volt,Working Top-Granite ,MOC-GI with PU coated Storage includedas per department incharge 175 Supplying of electronic balance(Specification -Usage/Application-Laboratory,Accuracy-0.01%,Calibration-Fully Automatic,Type Of Weighing Scale-Digital,Voltage-110-220 V Mounting Type Desktop) as per department incharge 176 Supplying of Magnetic stirrer Magnetic stirrer Hot plate (Specification-Weight-2.3 kg,Timer -999 minutes,Temp. Accuracy-+-1 Deg.C(<100 Deg.C)+-3 Deg.C(<300 Deg.C),Dimensions LxWxH (mm)-230 x 180 x 120,Max.Temp. (Plate Surface) 300 Deg.C,Power supply-AC 220V / 50 Hz,Top Plate Size 135 x 135 mm,Display-LCD,Max. Volume (ml) 2000 ml,Speed (RPM)-1250 RPM Plate Material Steel per department incharge 177 Supplying of HOT Air oven of made inner material-stainless steel,Outer material -mild steel ,Surface treatement -Powered coated ,Sizes-Different sizes,Gravity conviction type-Double wall.Mechnical conviction -Triple wall as per department incharge 178 Supplying of colourimetry , Ery colour colorimeter industrial and research purpose stability( Product Specification:Material-Aluminium Alloy,Automation Type Automatic,Brand -DD-LAB ,Dimension-210 x 160 x 80 mm,Display Type-Dual Digital DisplayLight Source-Highly Accurate Laser Source,Stability- + 0.02 O.D. Per Hour Volume 1 ml. minimum,Filters layer-Built in 9 Digital filters 30,000 hours Life,Weight-1.5 Kg,Battery Backup-6 V Ni CD Re-chargeable Battery,Detector Silicon Photo-diode,Display Model Absorbance & Wavelength,Filter Wavelength 680 NM Country of Origin Made in India) as per department incharge 179 Supplying UV-Vis Spectrophotometer Fully touch screen portable UV Spectrophotometer shimadzu model name:UV 1900,Brand :shimadzu,Display =fully touch screen,Type-portable,size 450x501x244 as per department incharge 180 Supplying of potentiometer ,Range-0 to 1999.9mv,Resolution-1 mv,Repeatability -1mV,Accuracy +1 mv+ digit,Input impedency-10ohms,operating temperature 10 to 50 degree Celsius,Display 1/2 digit 0.5 seven segment LED Display indication,Power-230V+10,50hZ,Dimensions 76x275x170 mm,weihjt 2 kh as per department incharge 181 Supplying of Conductivity meter,LT 26 Deluxe conductivity meter,Product details:Model no-LT-26,Brand -Labtronics,Usage-Laborataty,Display type 3.5 Digit LEDas per department incharge 182 Supplying of Online COD/BOD Detector analyzer warer quality monitoring probe,Measure range-0-200/0-1000mg/l,Resolution -1 mg/l ,Accuracy +5%F.s ,Under pressure-1 bar,Power supply -12-24V DC ,Temperature range 0-45 degree ,Production leve;-IP68 as per department incharge 183 Supplying of melting point appratus,Temperature renge -2 degree above ,Readability 1 degree ,Display -3 Digit LED,Heating rate control-Electronic,Temperatre sensor PT-100as per department incharge 184 Supplying of Ph meter Labrtonics,Range:0-14pH,Resolution:0.01pH,Accuracy:0.01pH(Relative),Temp comp:Automatic wvith temp probe,Buffer:Manuals with keys as per department incharge 185 Supplying of Spectrum 3 FT-IR Spectrometer,Model no.-LI280127,Wave length -11000-30 cm-1 as per department incharge 186 Supplying of Stopwatch NIVIA 600 plastic(Product Specification:Color-Black,Usage/Application-Sports,Time Display 12/24 hour display for user option,Material-Plastic,Dial Shape-OvalMaximum Counting-23 hours 59 minutes 59 secondsas per department incharge 187 Supplying of Digital Bomb Calometer(Specification-Auto Off Automatic,Frequency-50 Hz,Voltage-230-280 V,Operating Time Per Test 10 minutes,Power Source Electric(Automatic) as per department incharge 188 Supplying of Microprocessor viscometer ,Product details: Measuring range-101x105mpa,,Spindles-4 Spildles,Rotor speed(rpm)-6/12/30/60 rotor speed rpm as per department incharge 189 Supplying of Flame photometer,Product details:Application-Laboratory use,industialuse,,weight 705kg ,Curve fit accuracy,Resolution-0.1ppm/meq as per department incharge 190 Supplying ofwater purification system,Resolution-18.2 M ohm cm at 25 degree C,Weight-19.5kg,Frequency-50-60Hz as per department incharge 191 Supplying of Refrigerator of 7.5kg fully Automatic Top Load washing machine (Hard water wash,Grey,5 star,10 years warranty as per department incharge 192 Supplying of water bath ,unstirred water bath s ,Digital info Water bathdigital,18L amb+5 tp 99 degree C includes clear lid and base trayas per department incharge 193 Supplying ofmini rotary shakers 50to 400RPM,features-220/230 V ac,Power supply-50-60Hzas per department incharge 194 Supplying of Magnetic stirrer- capacity 5 litre Spinit Digital Magnetic Stirrer Features-Type of Product-Magnetic stirreras per department incharge 195 Supplying of Digital ultrasonic cleaners (Specification: tank capacity 4 L, ultrasonic power 100W, Heating, Power-100W, time setting 1-99 min, heating temp up to 80 degree, in and out both in ss, with digital timer auto stop of sonication. 230V AC +-10% 50HZ. Tank size 300x150x100mm, overall size 330x180x240mm.supplied with basket and Lid.) as per department incharge 196 Supplying of Calomel electrode (Product Specification:Packaging Type-Box.,Length-120 mmUsage-Electrochemical Study(Laboratory))as per department incharge 197 Supplying of Pt-wire counter electrode (Product Specification Electrode Diameter-0.5 mm,Power Source-10A) as per department incharge 198 Supplying of UV-LAMP Cabinet(Product SpecificationSize/Dimension-15 X 12 X 10 (H) Light Source-3 NOS , SHORT WAVE -254nm-1no, LONG WAVE-365nm, VISIBLE LIGHT,Material-MILD STEEL,Voltage 230 V AC) as per department incharge 199 Supplying of Magnet (Magnet Grade-N48 Shape-Cup & Pot,Material Neodymium,Dimensional Tolerance+-0.05 mm,Plating / Coating-Ni-Cu-Ni Colour-red,Surface Gauss 3000 Gauss,Maximum Working Temperature (Deg. C)-230 Deg. C as per department incharge 200 Supplying of Micro Centrifuge tube(Specification: Usage/ApplicationLaboratory Analyzers,Material,Polypropylene Color-White,Pack Contains--20 Packet / carton & 500 pcs / packet,Shape-Conical,Length-4.1 cm,Inlet Diameter-1.3 cm Capacity2 ml)as per department incharge 201 Supplying of Micropiprtte(10-100uL),(Product Specification Capacity-10 ml,Volume Increment -0.1 microlitre Material-Glass,Autoclavable-Yes)as per department incharge 202 Supplying of Micropiprtte(10-1000uL),( Product Specification Material-Plastic,Capacity-Up to 1000ul,Color-Transparent Usage/application-Chemical Laboratory) as per department incharge 203 Supplying of printer-Black and white print ,scan,copy all in one printer Product Specification Print Speed-Up to 18ppm / 19ppmLaser Printer,Color Output-Black & White,Print Technology LaserjetUsage/Application-Printing,Supported Paper Size-A4 Compatible Operating Systems1,Windows 8,Windows 7,Windows Vista,Windows XP,Windows 2000,Mac OS X 10.4 - 10.8,Linux*3 Print Resolution-Up to 600 x 600DPI,1 200 (Equivalent) x 600DPI,Print Language-UFR II LT Dimension-372 x 371 x 254mm (With the Cassette Opened)Weight(W/O CRG)-7.6kg,Monthly Duty Cycle-8000 Pages Power Consumption 960W(Maximum),First Printout Time7.8s / 7.7s (A4 / LTR),Zoom 50 - 200% in 10% Increments Refill Type Toner Cartridge,Internal Memory 64 MB Printer Language UFR II LT (Host Based),Paper Weight 60 to 163g/m2 (Cassette),Copy Speed Up to 18 / 19Cpm (A4 / LTR) Halftones 256 levels,Copy Resolution 600 x 400 DPI Display 7 - Segment,1 - Digit LED as per department incharge 204 Supplying of printer-colour print ,scan,copy all in one printer (Specification :Functions-Print | Scan | Copy,Technology-Inkjet Color output-Color | B&W,Connectivity-Wireless(Wi-Fi) Usage-For Office ,Paper size-A4,Print speed upto 40 pages/min)as per department incharge 205 Supplying of photocopier branded fast print 50ppm high image resolution superior print quality,fast scan up to 50ppm A4 Monocolouras per department incharge 206 Supplying of LAN.Networking,cabling,switches,Wi-Fi points(10 points in each department) as per department incharge 207 Supplying of installation of Printer (Black and white),Printer( colour),Photocopier and LAN,Networking,Cabling,Switches,Wifi Points as per department incharge 208 Supplying of RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio as per department incharge 209 Supplying of Freightof RS+ TT7519RS,RS75+ comes with 75 diagonal length with 3 GB RAM and 48 GB ROM,Slim Glare ,H7 touch surface hardness,Light weight for easy installation,Media suits for Annotation software Bundled with education apps,Office suits ,Great writing experience,Object recognition-First /palm /fine pen ,Touch points -20 points under andriod ,178 degree viewing angle ,IR Touch 15000 14-01-20241 contrast ratio) as per department incharge 210 Supplying of wall mount (Dimension long:Telescopic Adjustable CCTV camera mounting bracket -Color: Beige Universal Camera Bracket, Heavyduty weatherproof iron bracket fits mostbrands of outdoor camera housing,Iron stand Platsic APPLICATION: Ideal for indoor outdoor dome cameras, Security Camera Mount Bracket, high quality with professional design,more stable and reliable.Hidden hole: Cable can feed thru L bracket tothe housing thus provide cable protection Outdoor and Indoor Use.)as per department incharge 211 Supplying of Camcorder Compact full HD ENG Camera with 20X zoom and 5 axis image stabilization. 20X optical zoom (26.8mm, F/1.8-576MM, F/2.;28.8MM, f/1.-576mm). 5 axis image stabilization. Support formats: full HD50P/60P, AVCHD/MP4;SD card slots 2 35mm film camera equivalent when dynamic IS is turned on with Tripod as per Department Incharge 212 Supplying of Video capture and video capture card (Product Specification:Converter type-USB,Material:Metal,Audio Jack:3.5 mm,HDMI Version:Hdmi-1.4,Audio:44100 AU,Video:Full HD Frame:48000 Resolutions)as per department incharge 213 Supplying of UPS(1KVa)(Product Specification: Type-Online UPS,Capacity-1 kVA,Configuration-1 Phase IN - 1 Phase OUT,Protection-OverVoltage,Form Factor-Tower Model Back Up Time-20- 30 Mins,Frequency-40 ~ 70 Hz (auto-sense) Usage/Application All) as per department incharge 214 Supplying of Studio light-125watt,5 LED BULBS consisting of 25watt bulb(Colour Temperature:5500 kelvin)as per department incharge 215 Supplying of Live streaming software for live streaming or live telecast as per department incharge 216 Supplying of Cables,installation,SSD Card(SAMSUNG VNAND SSD 850 EVO 2.5 250GB SATA III 3-D Vertical Internal Solid State Drive (SSD) MZ-75E250B/AM) as per department incharge 217 Supplying of complete making soundproof class(20*20 feet Room) as per department incharge 218 Supplying of RFID Tags RFID Book Lables(specification: Language ‏ : ‎ English,Simultaneous device usage ‏ : ‎ Unlimited Text-to-Speech ‏ : ‎ Enabled,Screen Reader ‏ : ‎ Supported Enhanced typesetting ‏ : ‎ Enabled,X-Ray ‏ : ‎ Not Enabled,Word Wise ‏ : ‎ Not Enabled) as per department incharge 219 Supplying of Anti theft stickers with the university logo(Polycarbonate 175 Microns Matt Finish) as per department incharge 220 Supplying of Middleware Application Desktop(writing and read tags) as per department incharge 221 Supplying of RFID Staff station or desktop reader (used for Tagging of books and circulation) operations through RFID as per department incharge 222 Supplying of Integration with software and Training of complete RFID System as per department incharge 223 Supplying of Data Encoding,Booking Tagging and Registration per book as per department incharge 224 Supplying of RFID Secuity Gates (2 pedestals - 1 gate),RFID Secuity Gate(Provide Installation Service-Yes,Support-24/7 (Live Reporting Language Support-English) as per department incharge 225 Supplying of Automated book drop box (ntegrated RFID Reader • Approx. 250 Books Receiving Cart (Movable) • Client Software for Checking-in Facility and communicating with LMS with provision for E-mail/SMS confirmation • Has automatic hutch which should open only on valid RFID tags and close once the book has been accepted to prevent the patrons from removing checked in books. • Communication with any LMS Software through SIP2/NCIP protocols • Compliant with internationally recognized standards for RFID based library self-services systems. • Book Drop can display item ID once item is returned. • Enabled with necessary items i.e.: Branded CPU etc. • 15” or higher LCD/LED Touch Screen Monitor. • Ethernet High Speed Receipt Printer (Reputed/Branded) • Customizable Design matching the library aesthetics; Contemporary and attractive. • Design is such that there is not damage to the dropped books. • Library Ethernet network and wireless network compliant. • Optional Features: Fingerprint Scanner, Smart Card Readers etc) as per department incharge 226 Supplying of 5KVA Invertor -online UPS with battery back up 100Mah battery (8 units)(Product Specification,Capacity-1100 Voltage-130V ,Rated Input Power-5 KVA,Display-Digital Type-Square Wave Inverter Country of Origin) as per department incharge 227 Supplying of LAN,Switches,Necessary cabling,casing,power supply port including cables as per department incharge 228 Supplying of Installation charges of RFID Tags,Anti-theft sticker,Middleware Application Desktop,RFID Staff statio,Integration of software,Data incoding books,RFID Secuirty Gates,Automated Book Drop Box,Cabling,Casing,Wiring,Switches,LAN as per department incharge 229 Supplying of Air conditioning 1.8Ton heavy duty AC (minimum 3 star rating,Coil material -copper,Power consumption-1950W,Power Requirement -AC 130-285V, 50Hz) as per department incharge 230 Supplying of Desktop,i5 processor ,7th Generation,500GB HDD,4GB RAM,23.8 INCH LED Backlit Monitor,Full HD IPS Panel(Brand-HP,Dell,Acer) as per department incharge 231 Supplying of Headphone with built in microphone,(Communication-Wired) as per department incharge 232 Supplying of 75 diagonal length with 3 GB RAM and 48 GB ROM ,Slim frame anti glare glass.3M Antiglare ,H7 Touch surface hardness,Light weight for easy installation as per department incharge 233 Supplying of Dedicated server-HPE Proliant DL 380,Gen 10 5218.2.3GHz 16core ,1P-32GB-R P408ianNC 8SFF 800WPS Server,Intel xeon G5218 Kit for DL 380,Gen 10 as per department incharge 234 Supplying of 5.5KVA Inverter with battery backup,Microtek inverter,online UPS ,65Mah battery(16 unit )-Exide as per department incharge 235 Supplying of Freight Transportation Charges of Desktop,Headphone,LAN Switches,4K-OPS,Dedicated server,5.5 KVA Inverter with battery back up and Air conditioner as per department incharge 236 Supplying of 86 Diagonal interactive display,3 GB RAM,48 GB ROM,4K Display Android model,Slim framenAnti glare Glass,H7 Touch Surface hardness ,Light weight for easy installation ,Media Suits for Annotation softwatr bundled with education Apps as per department incharge 237 Supplying of 4k OPS i5,7th Gen,8GB RAM,128 GB SSD as per department incharge 238 Supplying of play mounting including white board & Green board,Material post formed ply,Size 15ft(length)x7ft(ht) with green board for chalk,whiteboard for marker and cupboard as per department incharge 239 Supplying of UPS (1KVa,Phase-Single phase.Back up Time 10-20 min,Frequency-50Hz) as per department incharge 240 Supplying ofTraining and installation of 86 diagonal interactive display,4k-OPS,Play mounting including white board & Green board and UPS of 1KVA as per department incharge 241 Supplying of Digital Podium PTGN 500 Windows 8.1 LCD ,Electronic Lectern,On site OEM Warranty in 3 yearsas per department incharge 242 Supplying of PA System sound system with amplifier 350 watt ,30 watt speaker (4 nos) as per department incharge 243 Supplying of wireless mic Dual channel cordless microphone as per department incharge 244 Supplying ofTraining and installation of Digital Podium,86 Diagonal interactive display (4k display),4K-OPS,Play mounting including white board and green board,5KVA invertor,PA System and wireless mic as per department incharge 245 Supplying of Desktop :- 1).i5 Processor, 7th Generation, 500GB HDD, 4GB RAM, 2).23.8 inch. LED backlit Monitor Full HD IPS Panelas per Department Incharge 246 Supplying of 55 LED Display for CCTV Branded LED Display as per department incharge 247 Supplying of CCTV Camera IP based CCTV camera,2 TB Space with NVR with necessary accessories as per department incharge 248 Supplying of Stagmometer as per Department Incharge 249 Supplying ofViscometer as per Department Incharge 250 Supplying of Beaker-50ml as per Department Incharge 251 Supplying of Beaker-100ml as per Department Incharge 252 Supplying of Beaker-250ml as per Department Incharge 253 Supplying of Beaker-500ml as per Department Incharge 254 Supplying of Beaker-1000ml as per Department Incharge 255 Supplying of Buchner Funnel 3 as per Department Incharge 256 Supplying of Buchner Funnel 6as per Department Incharge 257 Supplying of Burette-50ml as per Department Incharge 258 Supplying of Chromatography column 1x18 with stop cock as per Department Incharge 259 Supplying of Conical flask-100ml as per Department Incharge 260 Supplying of Conical flask-250ml as per Department Incharge 261 Supplying of Conical flask-500ml as per Department Incharge 262 Supplying of Conical flask-1000ml as per Department Incharge 263 Supplying of Flat Bottomflask-500ml(Round) B-24 socket as per Department Incharge 264 Supplying of Round bottom flask-50ml Joint B-24 as per Department Incharge 265 Supplying of Round bottom flask-100ml Joint B-24 as per Department Incharge 266 Supplying of 3 neck RB flask B-29,B-19.as per Department Incharge 267 Supplying of Condenser Spiral B-24 and, B-19 as per Department Incharge 268 Supplying of Condenser Spiral B-24 and, B-24 as per Department Incharge 269 Supplying of T-type tube as per Department Incharge 270 Supplying of Rubber Cock No. 10 as per Department Incharge 271 Supplying of Specific Gravity hydrometer 800-1000 as per Department Incharge 272 Supplying of Specific Gravity hydrometer 100-1200 as per Department Incharge 273 Supplying of Universal hydrometer 1000-2000 as per Department Incharge 274 Supplying of Measuring Cylinder-10ml as per Department Incharge 275 Supplying of Measuring Cylinder-50ml as per Department Incharge 276 Supplying of Measuring Cylinder-100ml as per Department Incharge 277 Supplying of Measuring Cylinder-500ml as per Department Incharge 278 Supplying of Measuring Cylinder-1000ml as per Department Incharge 279 Supplying of Measuring Cylinder-2000ml as per Department Incharge 280 Supplying of Measuring flask-100ml as per Department Incharge 281 Supplying of Measuring flask-500ml as per Department Incharge 282 Supplying of Measuring flask-1000ml as per Department Incharge 283 Supplying of Pipette-0.5ml as per Department Incharge 284 Supplying of Pipette-2ml as per Department Incharge 285 Supplying of Pipette-5ml as per Department Incharge 286 Supplying of Pipette-10ml as per Department Incharge 287 Supplying of Pipette-25ml as per Department Incharge 288 Supplying of Separating Funnel-250ml B-24/B-24 as per Department Incharge 289 Supplying of Spatula Flat Spoon 6as per Department Incharge 290 Supplying of Spatula Flat Spoon 5as per Department Incharge 291 Supplying of Stop Cork 2wayas per Department Incharge 292 Supplying of Silica crucible-15ml without Lid as per Department Incharge 293 Supplying of Silica crucible-25ml without Lid as per Department Incharge 294 Supplying of Stalagmometer Straight Graduated as per Department Incharge 295 Supplying of Chemical thermometer 10c-110c as per Department Incharge 296 Supplying of Chemical thermometer 0c-250c as per Department Incharge 297 Supplying of Tiration flask-100ml as per Department Incharge 298 Supplying of Tiration flask-250ml as per Department Incharge 299 Supplying of Tongs crucible S.S.8 as per Department Incharge 300 Supplying of Test tube holder as per Department Incharge 301 Supplying of Filter Flask-500ml as per Department Incharge 302 Supplying of Filter Flask-1000ml as per Department Incharge 303 Supplying of Watch glass 3 as per Department Incharge 304 Supplying of Watch glass 4 as per Department Incharge 305 Supplying of Watch glass 6 as per Department Incharge 306 Supplying of Wire gauge150x150mm as per Department Incharge 307 Supplying of Tripod stand 8 as per Department Incharge 308 Supplying of boiling Test tube 1x8as per Department Incharge 309 Supplying of boiling Test tube 2x8as per Department Incharge 310 Supplying of Reagent Stickers 2x1 as per Department Incharge 311 Supplying of Ordinary Filter paper as per Department Incharge 312 Supplying of Reagent bottles-250mlas per Department Incharge 313 Supplying of Rubber cork as per Department Incharge 314 Supplying of Rubber tube 6mm as per Department Incharge 315 Supplying of Solid Reagent bottle-125mlas per Department Incharge 316 Supplying of Stopwatch plastic body as per Department Incharge 317 Supplying of Test tube stand 12 holes as per Department Incharge 318 Supplying of Thermometer 360 as per Department Incharge 319 Supplying of Test Tube 6mmx15cmas per Department Incharge 320 Supplying of Test Tube 10mmx10cm as per Department Incharge 321 Supplying of China dish 3 as per Department Incharge 322 Supplying of China dish 4 as per Department Incharge 323 Supplying of Brushes for Test Tube as per Department Incharge 324 Supplying of Brushes for Burette as per Department Incharge 325 Supplying of Brushes for Conical flask as per Department Incharge 326 Supplying of LPG gas burner as per Department Incharge 327 Supplying of Condenser Coil 12 as per Department Incharge 328 Supplying of Receiving adopter with vacuum outlet as per Department Incharge 329 Supplying of Plastic Wash bottle-500mlas per Department Incharge 330 Supplying of Pastel and Mortar 3 as per Department Incharge 331 Supplying of Pastel and Mortar 4 as per Department Incharge 332 Supplying of Pastel and Mortar 6 as per Department Incharge 333 Supplying of China Clay 2 as per Department Incharge 334 Supplying of China Clay 3 as per Department Incharge 335 Supplying of China Clay 4 as per Department Incharge 336 Supplying of Petri Dish 3(Borosil) as per Department Incharge 337 Supplying of Petri Dish 4(Borosil) as per Department Incharge 338 Supplying of Distillation Set-Complete flask-500ml as per Department Incharge 339 Supplying of Distillation Set-Complete flask-1000ml as per Department Incharge 340 Supplying of Thermometer Pocket B-14 as per Department Incharge 341 Supplying of Sintered Glass Funnel-25ml as per Department Incharge 342 Supplying of Air Condenser 12 as per Department Incharge 343 Supplying of Burette Stand with Clamp as per Department Incharge 344 Supplying of Cork borer as per Department Incharge 345 Supplying of Capillary Tube for melting point as per Department Incharge 346 Supplying of Dessicators 6 as per Department Incharge 347 Supplying of Dessicators 8 as per Department Incharge 348 Supplying of Dropper with Rubber teats 6 as per Department Incharge 349 Supplying of Dropper 4(Borosilicate glass) as per Department Incharge 350 Supplying of Dropping bottle-125ml as per Department Incharge 351 Supplying of Funnel Stand as per Department Incharge 352 Supplying of Fusion Tubeas per Department Incharge 353 Supplying of Glass Rod as per Department Incharge 354 Supplying of Glass Tube as per Department Incharge 355 Supplying of Stopwatch Steel body as per Department Incharge 356 Supplying of Magnetic Stirrer as per Department Incharge 357 Supplying of Rubber Gloves as per Department Incharge 358 Supplying of Reagent as per Department Incharge 359 Supplying of Sandbath as per Department Incharge 360 Supplying of Tissue Paper(Local made) as per Department Incharge 361 Supplying of Double Beam PC Microprocessor UV-VIS Spectrophotomet erMake:Systroni cs Model: 2202 PC Based Double Beam Automatic source optimization ,Base line calibration & Cell optimization 200 - 1100 nm Range2. 0 nm Bandwidth%T. Abs. Conc . (K factor. Multi standard ). Multi component measuring modesSingle Wave length, Multi Wave length Scan (with multi scan facility). Time Scan. Kinetic scan operating modes Automatic 5 position sample changer Single Position 50 /100 mm Cuvette Holder (Optional) as per Department incharge 362 Supplying of Refrigerated Centrifuge,(Specification:Speed:- 20000 Max.,RCF:- 37570 Max.,Lowest Temp:- -8,Noise:- <-60db)as per Department incharge 363 Supplying of Refrigerated Centrifuge Essential accessories Required:. With angle Heads (with polypropylene tubes)Model- R-248M 24xl.5 ml as per Department incharge 364 Supplying of Refrigerated Centrifuge 2. Voltage stabilizer:- 03 KW Servo controlled Voltage Stabilizer, input 170 volts to 260 volts, output 220 volts to 240volts as per Department incharge 365 Supplying of PCR machine(Specification- Well block, Gradient, temp. range 4° - 99-irC, memory capacity 10000 protocols , display 7inch,volume capacity I 0- 100 μL , preloaded protocol, temperature accuracy ±0.2°C@99°C, with PCR wizard as per Department incharge 366 Supplying of SOS PAGE unit and Western Blot apparatus along with power bank -Mini-TBC electroph_oretic transfer cell, includes: Mini 01P-4 cell tank and lid with cables, buffer, Mini transfer module, gel holder cassettes, 4 fiber pads, cooling units, instructions, Western blot unit, compatible power bank as per Department incharge 367 Supplying of pH Meter With electrode(Type of PH Mater - Portable,Ph Range:0-14,Resolution-0.01pH,compensation-0 to 80 degree celsius) as per Department incharge 368 Supplying of Deep fridge(It is used to store chemicals and preserve samples at very low sub-zero temperatures or below)as per Department incharge 369 Supplying of Autoclave (Vertical)Size- 400 x 600mm ,;Capacity- 75Ltr as per Department incharge 370 Supplying of Hot air oven (Sterilization) as per Department incharge 371 Supplying of Incubator Shaker-Growth and enumeration of microbes (Broth cultures) as per Department incharge 372 Supplying of Horizontal Laminar air flow(Sterile environment Size 4X2)as per Department incharge 373 Supplying of Horizontal Agarose gel electrophoresis unit with gel caster and Power pack Separation of macromoleculeas per Department incharge 374 Supplying of Vortex mixture-To mix content of test tubes and microfuge tubes. as per Department incharge 375 Supplying of Ultrapure Water Purification System:MiliQ Water For distill wateras per Department incharge 376 Supplying of Micropipets - 0.1μL-2.5μL 0.5μL-10.0μL 10.0μL-l00μL 20.0μL-200μL l00μL-l000μL as per Department incharge 377 Supplying of Quebec Colony Counter -Count the microbial colonies as per Department incharge 378 Supplying of Light Microscope (General) 10X,20x, 45x, l00x Visualize microorganisms as per Department incharge 379 Supplying of Bifocal microscope with illuminators, Camera attachment and computer Visualize microorganisms and microgrphy as per Department incharge 380 Supplying of Magnetic stirwith Hotplate and magnetic beads To stir the liquids , preparation of solution as per Department incharge 381 Supplying of Heating mantle For heating round bottomed flask/distillation flask as per Department incharge 382 Supplying of Microwave oven To heat liquids instead of flaming. Samsung/ LG 20 Ltrs as per Department incharge 383 Supplying of Glass Dessicators Used for dessication as per Department incharge 384 Supplying of Fluorescence microscope A fluorescence microscope is an optical Microscope that uses fluorescence and phosphore scence instead of,or in addition to, reflection and absorption to study properties of organic or inorganic substances as per Department incharge 385 Supplying of Electronic Analytical Balance It is used to weigh small quantities of chemicals and samples precisely and quickly. Readability- 1 mg (0.001 g) Cap.- 420gm as per Department incharge 386 Supplying of Electronic Top pan Balance- Readability- 0.1 g Cap.- 2 kg.as per Department incharge 387 Supplying of Double Distillation Unit ,.Approx output: 2 Lit/hrs Wattage:3.3 .KW With safety Cutoff Device Water Stills are carefully designed to produce high purity pyrogen free distiiied water. The water still comprises ofborosilicates glass horizontal typeboiler, coil condenser, constant level device, silica sheathed heaters, along with stand and clamps. All parts are replaceable. pH/conductivity:6-7 / 1-2 μSiem forsingle, 6-7/0.8-lμS/cm for double distilled water as per department incharge 388 Supplying of Microtome-5286(Product Specification Minimum Setting Value-0.5 um,Object Feed-28 mm,Vertical Stroke-60 mm,Specimen Orientation X and Y Axis Universal 8 Degree Trimming Thickness Range-1 um-100 um Operation-Automatic. (Motorized Feed & sectioning and Emergency Stop Provided),Sectioning Speed-0-400 mm/sec.,Specimen-Orientation Z Axis-Upto 360 Degree,Retraction Value-Adjustable Max Specimen Size-50 x 50 mm,Section Thickness Range-0.5 um-60 um)Senior rotary microtome as per Department incharge 389 Supplying of Cryostat -(Product Specification Section Thickness Range-0.5 Micron to 100 Micron (with the increment of 0.5 Micron, 1 Micron, 2 Micron, 5 Micron) Power Supply-220v,Dimension-750mm x 750mm x 950mm (approx) Weight -123 kg (approx),Remote Control-Optional,Sectioning Mode-Single step mode/ Continuous mode Hand Wheel Control-Feather Touch Keypad/ Foot Switch/ Remote Control (optional),Sterilization-U.V-C Sterilization,Cooling down time Up to -30 DegreeC-2 Hour 30 Min Specimen Retraction setting Range-5 Micron to 100 Micron (with increment of 5 Micron),Compressor-Dual Compressor,Cryo Chamber Temp. Adjustable -1 DegreeC to -30 DegreeC Block Holder Head Temperature-Adjustable -1 DegreeC to -35 DegreeC Illumination-LED Lamp)Ultimate usico fully automatic cryostat as per Department incharge 390 Supplying of ELISA -Vet scientific(Specification-Product Specification Automation-Semi Automatic,Assays Performed-ELISAs, Immuno Assays Plate Format-96 well,Optical System Filter-based Detection Method-Absorbance,Number Of User Programs 42 Storage-100000 Results,Filter Positions-8 Display Type-Touch Screen Packaging Type-EXPORT QUALITY,Testing Speed-3 second Type Of Filter 405,450,492, 630,Power Source-115/230 V AC, 50Hz,Weight-9 Kg,Is It Portable-Non Portable, sample Type-Serum, Plasma, Urine, CSF, Whole Blood,sample Volume Range-10-100 Interface-RS232/ USB) as per Department incharge 391 Supplying of Calorimeter -A VI Digital (A VI Scientific,Frequrcy:50Hz,Voltage:230-280V,operating time per test-10 min) as per Department incharge 392 Supplying of HaemometerSahli type-Microsidd (Specification:Amber coloured glass bottle -1 No.,Glass Stirrer-1 No.,Dropper with teat -1 No.,Cleaning Brush -1 No.,Spare latex tubing one meter -1 No.Round tube haemoglobinometer) as per Department incharge 393 Supplying of Anti - theft Sticker with the University logo as per Department incharge 394 Supplying of Middleware Application Desktop(Write and Read Tags) as per Department incharge 395 Supplying of RFID Staff Station or desktop reader (Used for tagging of books and circulation {lssue/Return) operations through RFID) as per Department incharge 396 Supplying of Integration with Software and Training of Complete RFID System as per Department incharge 397 Supplying of RFIDSecurityGates (2 pedestals-1 gate) RFID Security Gate (Single Lane) as per Department incharge 398 Supplying of Automated Book drop Box as per Department incharge 399 Supplying ofCabling. Casing. Wiring , Switches as per Department incharge 400 Supplying of Freight Transportation of Miidle ware Application Desktop,RFID STAFF Station,Integration with software training,Automated Drop box ,Cabling,Casing,Wiring,Switches as per Department incharge 401 Supplying of LAN . Switches, Necessary Cabling, Casing , Power Supply port including cables as per Department incharge 402 Supplying of Dedicated serverGHZ 16 core 1P-32GB -RP408ia -NC8SFF800WPS Serverintel Xeon -G5218 Kit for DL 380 GEN-10-HPE 32GB 2RX4 PC-4 2933YR Smart kit ,HPE DL38x Gen 10-12 Gb SAS Expande,HPE DL 380Gen 10 Box 1/2 Cage Bkpin kit ,HPE 24TB SAS 12G 10K SFF SC 512eDS HDD .HPE 800 WFS Ht Plg LHPwr Sply kit,HPE 3 Year Fiundation care 24x7 DL 380 Gen 10 Serviceas per Department incharge 403 Supplying of RS 86+_TB619RS, 3GB RAM and 48 GB ROM,4K Display Android model,3 GB RAM And 48 GB ROM,slim frame,Anti Glare Glass,3M Anti glare H7 Anti touch surface hardness lightweight for easy installation,Media suits for Annotation,Software bundled with education apps,Office suits,Great writing experience,Object recognition -First pal,/Fine pen ,Touch Points-20 points under window and 10 points under android,178 degree viewing angle IR ,Touch 15000,1 contrast ratio,4 MS Response time 50000 hours life,Reduce clutter and bring efficiency for the faculty,Remote control,15 wattX2 speaker,Android 8.0,Newline cast,Display management,Newline broadcast including installation and Trainingas per Department incharge 404 Supplying of Deep Fridgeas(2 in 1 Converti Freezer & Cooler Corrosion Resistant Cooling Coil & PPGI for inner & outer body Heavy Duty Compressor & Tropicalised Design Approximately 14% Higher Net Capacity compared to competition Sleek Design with heavy duty performance) per Department Incharge 405 Supplying of Autoclave (Horizontal,Height X Dia: 450mm x 250mm Height x Dia: 18Inch x 10Inch,Capacity: 22 Ltr,Load: 2.0 KW) as per Department Incharge 406 Supplying of Autoclave (Vertical): size- 400x600mm, Capacity- 75Ltr as per Department Incharge 407 Supplying of Hot air oven(Standard double wall fabrication. Inner chamber made of highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations.Nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50c to 250c + 1c controlled by capillary type thermostat.Inner Chamber Size 18x18x18 inch. made of Stainless Steel) : any Standard make as per Department Incharge 408 Supplying of Bacteriological incubator(Item Weight ‎10 kg Product Dimensions-30 x 30 x 30 cm; 10 Kilograms,Item model number-12X12,Item Height-30 Centimeters Item Width-30 Centimeters) as per Department Incharge 409 Supplying of Bacteriological shaking incubator as per Department Incharge 410 Supplying of BOD incubator as per Department Incharge 411 Supplying of Laminar air flow any Standard company as per Department Incharge 412 Supplying of Micropipettes with microtips :(1.0uL-10.0uL, 10.0uL-100uL, 100uL-1000uL, 20uL-200uL): A. Prime Variable Pipette, B. Fully Autoclaveable Variable Vol. Pipetteas per Department Incharge 413 Supplying of Colorimeters with cuvettes any Standard company as per Department Incharge 414 Supplying of Western Blot apparatus, as per Department Incharge 415 Supplying of Powerpack with wiresas per Department Incharge 416 Supplying of Homogeniser as per Department Incharge 417 Supplying of PCR machine Block Formats 96x0.2ml(A),54x0.5ml(B), 96x0.2ml +77x05ml©, 384well(D) Size(WxDxH,mm)-380x270x250 as per Department Incharge 418 Supplying of UV Transilluminator/UV chamber UV source: 365nm Wave Length Viewing area: 24x14cm Anti Slip rubber foot provided for base as per Department Incharge 419 Supplying of CO2 incubator as per Department Incharge 420 Supplying of pH meter and buffers: A.pH meter B. pH buffers as per Department Incharge 421 Supplying of Water bath (any Standard company ) as per Department Incharge 422 Supplying of Fume Hood: size- 3x3x2 wooden with Granite working area as per Department Incharge 423 Supplying of Soxlet apparatus with heating mantle and distillation set up as per Department Incharge 424 Supplying of Kjeldahl Apparatus as per Department Incharge 425 Supplying of Ultrapure Water Purification System: MiliQ water as per Department Incharge 426 Supplying of Quebee Colony Counter as per Department Incharge 427 Supplying of Light Microscope (general) 25x, 45x, 100x s as per Department Incharge 428 Supplying of Bifocal microscope with illuminators as per Department Incharge 429 Supplying of Magnetic stirrer with magnetic beads(any Standard company )as per Department Incharge 430 Supplying of Magnetic stirrer with hot plate (Remi) as per Department Incharge 431 Supplying of Heating mantleas per Department Incharge 432 Supplying of Microwave oven ((20Ltr) as per Department Incharge 433 Supplying of Glass Dessicators as per Department Incharge 434 Supplying of Computer : Core i9, 7th Gen. 20 LED Monitor, 4GB DDV, 1TB HDD, DV writer HP/Dell as per Department Incharge 435 Supplying of Culture room: Tissue culture Rack fitted with 16 tubes, 8 bulbs, 4UV & Timer as per Department Incharge 436 Supplying of Electronic Analytical Balance:- Readability- 1mg(0.001g) Cap.-420gm as per Department Incharge 437 Supplying of ElectronicTop-pan Balance:-Readability- 0.1g Cap- 2kgas per Department Incharge 438 Supplying of Electroporator:- as per Department Incharge 439 Supplying of Fermenter(7.5L)(any Standard company )as per Department Incharge 440 Supplying of Fluorescence Microscopeas per Department Incharge 441 Supplying of Hot air oven universalas per Department Incharge 442 Supplying of Distillation Unit as per Department Incharge 443 Supplying of Membrane filter assembly 5000 mlas per Department Incharge 444 Supplying of Fluorimeter as per Department Incharge 445 Supplying of Homogeniser: Remi model- RQT-127 A/D High speed homogenizer, with 1/8 HP Motor, Homogenizer Working Volume [H2O] 0.1-50ml (Dispersing shaft DS-160/5) WEIGHT 0.6KG Dimension[LxWxH] 46mmx55mmx230 operating environment 0-40degre, 85% rel. humidity as per Department Incharge 446 Supplying of ELISA reader and Microtitre plates: ELISA Wavelength range 400nm-800nm Accuracy- +-1% at 1.0OD, 450nm Dimension 450x350x197mm as per Department Incharge 447 Supplying of Liminar air flow : 4x2x2 feet, stainless steel as per Department Incharge 448 Supplying of Gel Documentationd system as per Department Incharge 449 Supplying of 5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 450 Supplying of 12V/26AH- Batteryas per Department Incharge 451 Supplying of Headphone with built in microphone (Brand) as per Department Incharge 452 Supplying of Furniture:- Computer Table & Chairs & Table- Chair for lab. Instructor and student (50 students per batch) as per Department Incharge 453 Supplying of Network:- LAN, Switches, Cabling, Casing Power Supply Port including Cables as per Department Incharge 454 Supplying of 5.5 KVA Inverter with Battery Backup. Microtek inverter, online UPS 65Mah Battery (16 units) -Exide as per Department Incharge 455 Supplying of RS86+ TT8619RS 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0, Newline Cast, Display Managemen, Newline Broadcast Including Installation and Training. as per Department Incharge 456 Supplying ofpH meter(Digital) :- pH range: 0-14, Temperature Range: 0.0 to 100 C (Manual Compensation) as per Department Incharge 457 Supplying ofNoise Level meter:- Auto/Manual ranging from 30 to 130dB in 6 ranges as per Department Incharge 458 Supplying ofWater analysis Kit:- They include; alkalinity, chloride, hardness, iron, and sulphate as per Department Incharge 459 Supplying ofHigh volume sampler:- 1)PM-2.5- Designed to meet International Standards for High volume air Sampling of PM2.5 particulates. 2)PM-10-U.S EPA FRM Designed for the determination of suspended of PM-10 particulates concentrations. (RFPS-1287-063) 3)TSP- Designed to meet U.S EPA reference method for determination of total suspended particulates(TSP) concentration as perDepartment Incharge 460 Supplying ofSoil testing kit (mrinda parikshan kit) : Use for micro and macro nutrients as per Department Incharge 461 Supplying ofSeive plate with shaker : 5mm,1mm,2mm) as per Department Incharge 462 Supplying ofUV/Visible spectrophotometer:- Spectral bandwidth 1 nm (190 to1100nm , Lamp Type 20-W halogen lamp and deuterium lamp as per Department Incharge 463 Supplying ofAutoclave : 10-15 litre Steam Sterilizer as per Department Incharge 464 Supplying ofLaminar hood (Horizantal) : Horizontal air flow cabinet, filter air blow across the work zone in horizontal direction. This constant flow of air provides material and product protection as per Department Incharge 465 Supplying ofHot plate(pic):-Temperature range: 350 C as per Department Incharge 466 Supplying ofShakeer incubator Compact Bench top shaker with temperature control range from Ambient +50C to 600C. Tray dimension : 420x420 , Speed 50-350 rpm with accuracy of +/- 2rpm as per Department Incharge 467 Supplying ofMuffle Furnaces (15x125x250)cm: Temperature upto 35C to 1400C as per Department Incharge 468 Supplying of Analytical Balances:Capacity 220gram as per Department Incharge 469 Supplying ofDigester : 1) vessel size : Dia 39 mm (Aprox.); Volume 160ml 2)Temperature : upto 200degC as per Department Incharge 470 Supplying ofDouble distilled water plant: Model- Vertical:- Distlled Water Output Capacity-2.5 Litres/Hours, Distillate water quality as per Department Incharge 471 Supplying ofOven:- Dry ovens- 30 to 1000 litre capacity. as per Department Incharge 472 Supplying of B.O.D Incubator: Volume 68 Litre as per Department Incharge 473 Supplying ofMagnus Microscope:- Magnification 4x,10x,40x, and 100x as per Department Incharge 474 Supplying ofDesiccators:- Contain: Silica Gel dimension;12x12 in (30.5x30.5 cm),Material Glass as per Department Incharge 475 Supplying ofRichter scale hardness tester Portable Rockwell/brinell vickers Hardness Testing Instrument Mold metal hardness meter display:-parameter- HRC Display Type, Digital Model Name/Number- ATedigiHR, Accuracy- 0.1 HRC Dimensions of Machine base (approx.) 150x425 mm as per Department Incharge 476 Supplying ofProctor Penetrometer: Proctor Penetrometer- Complete with set of needle points Weight, 2 kg as per Department Incharge 477 Supplying ofGas Chromatography Retention time repeatability-< 0.008% or 0.0008 min Area rpeatability -<1% RSD, using 2ng tetradecane as per Department Incharge 478 Supplying of Atomic Absorption Spectrometry(AAS):- aa-7000 SERIES OF Atomic Absorption Spectrophotometers features high- sensitivity analysis as per Department Incharge 479 Supplying ofWavelength range; 400 to710nm Wavelength selection: 8 in-built gelatin filters: 430,470,490,520,540,580,600 and 710 nm Measurement ranges; 0-100%T, 0-1.50Abs, 0.1 to 1000 Concentration. Resolution: 1%T, 0.01Abs, 0.1 to 1 Concentration as per Department Incharge 480 Supplying of Laptops(of Specification:Processor Corei5,RAM:4GB,Hard drive:500GB ,Screen size:12 inch):as per Department Incharge 481 Supplying of Desktops: i7 3rd Gen, 1TB HDD, 4GB RAM, Windos 10, MS office, Graphics card as per Department Incharge 482 Supplying of Xerox Machine(Product Specification:Functions Multi-Function:Supported Paper Size-A3,Supported OS-all,Color Output-Black & White,Number Of Trays-4,Item Color-white and blue Print Speed-up to 35 ppm,Weight 129 kg,Print Technology-Laser Warm-Up Time, As fast as 11 seconds (black and white) Duty Cycle-WorkCentre 5335: Up to 150,000 pages / month Resolution-200 x 1200 dpi) as per Department Incharge 483 Supplying of Air Conditioning:-1.5 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 484 Supplying of Luminous Cruze 3.5KVA Inverter with RC 18000 Battery (4 Batteries) as per Department Incharge 485 Supplying of Projector(Special Feature-portable,Connectivity Technology,Bluetooth, Wi-Fi, USB, HDMI,Display resolution 1920 x 1080,Display Type-LED) as per Department Incharge 486 Supplying of Godrej Lecture Hall Furniture as per Department Incharge 487 Supplying of Electronic Podium(Speaker type-Tweeter,Auxillary,wireless,floor standing) as per Department Incharge 488 Supplying of Smart board (Screen size-11 inches,Connecting technology-Wifi,Multimedia)as per Department Incharge 489 Supplying of Black board( Melamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS CornersMelamine Writing Surface (Chalk), Paper Honeycomb Core, 6063-T6 Alloy Aluminium Frame & Virgin ABS Corners) as per Department Incharge 490 Supplying of Glassware rack as per Department Incharge 491 Supplying of installation of Air conditioner,Luminous Cruze,Projector,Lecture Hall Furniture,Electronic podium,Smart board and black board as per Department Incharge 492 Supplying of Inductively coupled Plasma - Optical Emission Spectrometer with CID detector technology for multi-element analysis of geological petrogical etc. samples in ppb level as per Department Incharge 493 Supplying of Suppressed ion analysis system for anion and cation analysis in water, wastewater, environmental samples and also upgradable to combustion for determination of corrosive halogens and sulfur in Petrochemicals, gaseous samples, solid samples, and complex samples as per Department Incharge 494 Supplying of CHNS/O for the analysis of Carbon, Hydrogen, Nitrogen, Sulfur and Carbon in organic matrices, soil, feed , plant samples, petroleum products, Coal, Coke, Biomass & Liquid Fuels as per Department Incharge 495 Supplying of Gas Analyzers for hydrocarbon and permanent gas analysis as per Department Incharge 496 Supplying of Benchotop XRD as per Department Incharge 497 Supplying of XRF Spectrometer as per Department Incharge 498 Supplying of Refrigereted Centifuge MakE-REMI, Model-C24 PLUS :- Max. Speed:20000, Max. RCF:3757, Max. Lowest Temp.:8, Noise:60db. Essential accessories Required: 01. Withangle Heads (with polypropulene tubes) Model-R-248M24x1.5ml 2)Voltage stabilizer:-03KW Servocontrolled Voltage Stabilizer, input 170volts to 260volts, output 220 to 240volts as per Department Incharge 499 Supplying of pH Meter compatible poer bank Make: REMI :- With eletrode as per Department Incharge 500 Supplying of Bench top Centrifuge Make: Tarson, : - SPINWIN MC-001 6 places Rotor for 1.5 ml tubeas per Department Incharge 501 Supplying of Deep Fridge: It is used to store chemicals and preserve samples at very low sub-zero tempertures or below as per Department Incharge 502 Supplying of Autoclave(Vertical) : size- 400x600mm capacity- 75Ltr as per Department Incharge 503 Supplying of Hot air oven : Sterilization as per Department Incharge 504 Supplying of Incubator Shaker: Growth and enumeration of microbes(Broth Cultures) as per Department Incharge 505 Supplying of Horizontal Laminar air flow:- Sterile environment size 4x2as per Department Incharge 506 Supplying of Ultrapure Water Purification System: MiliQ Water : for distil water as per Department Incharge 507 Supplying of Micropipets (Ependroff): 0.1uL-2.5uL, 0.5uL-10uL, 10.0uL-100uL, 100uL-1000uL each oo these 1pcs as per Department Incharge 508 Supplying of Light Microscope (general)10X, 20X, 45X, 100X, : Visualize microorganisms as per Department Incharge 509 Supplying of Bifocalcal Microscope with illuminators, Camera Attachment and comput: Visuallize microorganisms and micrography as per Department Incharge 510 Supplying of Magnetic stir with Hotplate and magnetic bead as per Department Incharge 511 Supplying of Heatingmant; for heatinground bottomed flask/distillation flask as per Department Incharge 512 Supplying of Microwave oven: To heat liquids instead of flaming. 20Ltrs as per Department Incharge 513 Supplying of kydroPro 100 handeld multiparameter water quality analiser: Turbedityas per Department Incharge 514 Supplying of Petrological Microscope: Study of Optical minrology as per Department Incharge 515 Supplying of Ore petrological microscope: Study of ore petrology as per Department Incharge 516 Supplying of Miscellaneous instruments as per Department Incharge 517 Supplying of glassware as per Department Incharge 518 Supplying of chemical as per Department Incharge 519 Supplying of Arc GIS(Latest) as per Department Incharge 520 Supplying of GCD Toolkits as per Department Incharge 521 Supplying of SURPAC Software as per Department Incharge 522 Supplying of Intergraph Edu Kit [GIS+RS] Version 2020 or latest(Software content as per list), 5 users for Erdas imagine Professional and 5 users for Geomedia professional Software as per Department Incharge 523 Supplying of Interactive Flat Panel as per Department Incharge 524 Supplying of 2 Virtual Class Room including capture, recording and streaming online, 1 Servers one per 05 classrooms per Department Incharge 525 Supplying of N-computing for smart classrooms including servers and clients as per Department Incharge 526 Supplying of Tagging of documents(books/hard-bound journals/CDs/technical films etc)in RFID Technology as per Department Incharge 527 Supplying of Sofwares, Server Machines, Air-Conditioning Systems,Xerox Machines, Lamination Machines, Binding Machines, Furniture/Furnishing, Computers, Printers etc as per Department Incharge 528 Supplying of Digital Podium, PTGN 500, Window & 1 LCD, Elecronic Lectern, on site OEM. Warranty 3years, 3GB RAM,4GB ROM as per Department Incharge 529 Supplying of Air Conditioning:-1.8 Ton heavy duty AC (mimimum 3 Star rating) as per Department Incharge 530 Supplying of Black/ White,Printer:- scan-copy all in printer- Branded as per Department Incharge 531 Supplying of CCTV set for floor: 55 LRD display for CCTV. CCTV Camera-1 P based CCTV camera 2TB space with NVR with necessary accessories as per Department Incharge 532 Supplying of 5KVA Inverter online UPS with battery backup 100Mah battery(8 units) as per Department Incharge 533 Supplying of Electrophoresis Apparatus as per Department Incharge 534 Supplying of Bacteriological Incubator as per Department Incharge 535 Supplying of Autoclave as per Department Incharge 536 Supplying of Centrifuge as per Department Incharge 537 Supplying of Rotar Head as per Department Incharge 538 Supplying of Rotar Head 25 as per Department Incharge 539 Supplying of Gel documentation system as per Department Incharge 540 Supplying of Spectrophotometers as per Department Incharge 541 Supplying of compoud Microscope as per Department Incharge 542 Supplying of Trinocular Microscope with camera as per Department Incharge 543 Supplying of Semi-Automated Microtonne as per Department Incharge 544 Supplying of DNA Sequencer as per Department Incharge 545 Supplying of Spectrophotometer as per Department Incharge 546 Supplying of Laminar air flow chamber as per Department Incharge 547 Supplying of Tissue culture rack as per Department Incharge 548 Supplying of PCR Apparatus as per Department Incharge 549 Supplying of Liquid nitrogen cylinder as per Department Incharge 550 Supplying of TLC apparatus kit as per Department Incharge 551 Supplying of TLC Visualizer/documentation as per Department Incharge 552 Supplying of HPLC System as per Department Incharge 553 Supplying of Scientific vortex mixer as per Department Incharge 554 Supplying of Soil Thermometer as per Department Incharge 555 Supplying of Scientific Digital Balance as per Department Incharge 556 Supplying Equipments for workshop,Seminar & Excrusion as per Department Incharge 557 Supplying Equipments for Non-Recurring(Research Equipment) as per Department Incharge 558 Supplying Equipments for Recurring(Chemical & Glassware) as per Department Incharge 559 Supplying of Furniture Bookshelves, Study Tables and Chairs for Readers as per Department Incharge 560 Supplying of Desktop i5 Processor, 7th Generations, 500GB HDD, 4GB RAM, 23.8 inch, LED backlit Monitor Full HD IPS Panel (Brand: HP/DELL) as per Department Incharge 561 Supplying of Headphone with built in microphoneas per Department Incharge 562 Supplying of Printer with scanner (Laser,Colour/B/W)as per Department Incharge 563 Supplying of Scanner(USB,25.2D x 36.8W x 4.3H Centimeters,Slide) as per Department Incharge 564 Supplying of Xerox Machine:- (,Platen cover & Toner, Resolution (DPI):1200 X 1200dpi, Duty Cycle:1.3 Sec) as per Department Incharge 565 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-500mm,Laminating speed-1200mm)as per Department Incharge 566 Supplying of CCTV Camera(Full HD Picture,AI Powered Motion Detection,Infrared Night Vision; 360° Panorama,Talk Back Feature (2-Way Audio)Material Type: Plastic; Included Components: Camera, Power Adapter, Charging Cable, Wall Mounting Kit, User Manual; Specific Uses For Product: Surveillance) as per Department Incharge 567 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 568 Supplying of RS75+ TT7519RS RS 75+ comes with 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Android Model Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management. as per Department Incharge 569 Supplying of Wall Mount Kit(Material: SS,Max loading capacity-60 to 100kg) as per Department Incharge 570 Supplying of Live streaming software Software Software for Live Streaming or Live telecast as per Department Incharge 571 Supplying of 75 inch diagonal length with 3 GB RAM, 48 GB ROM 4K Display, Slim Frame, Anti-Glare Glass, 3M Anti-Glare, H7 touch surface hardness, Light weight for easy installation. Media Suits for Annotation Software. Bundle with Education Apps. Office Suits. Great Writing Experience. Object Recognition- Fist/Palm/Fine Pen, Touch Points-20 points under Android. 178 Degree viewing Angle, IR Touch. 15000:1 contrast ratio, 4MS Response Time, 50000 Hours life. Reduce cluster and bring efficiency for the faculty. Remote control, 15 watts x 2 speaker. Android 8.0 Newline Cast Display Management including wall mount and installation. as per Department Incharge 572 Supplying of Frieght Transportation of 4K Display,Wall mount kit,Live Streaming software as per Department Incharge 573 Supplying of cctv solutions for Department with 20 cameras(Image Sensor Type-CMOS,Image Sensor Size-0.357 inch,Camera Image Sensing capacity (Picture Mode)-2MP,Resolution-Full HD (1920 x 1080 Pixel)-Day/Night Capable-Yes,IR illumination Range(mtr) 200 Type of Camera HousingDOME CAMERA,IP Camera Yes) as per Department Incharge 574 Supplying of installation and commisioning of CCTV and other computer equipment as per Department Incharge 575 Supplying of 55 Tv for seeing all cctv in HOD room as per Department Incharge 576 Supplying of8 PORT EPBX as per Department Incharge 577 Supplying ofTELEPHONE as per Department Incharge 578 Supplying ofWIRE as per Department Incharge 579 Supplying of CRON BOX as per Department Incharge 580 Supplying ofSWITCHES FOR PORTS as per Department Incharge 581 Supplying of Workststion Table, Chairs, Desktop, UPS as per Department Incharge 582 Supplying of LAN, Switches, Necessary Cabling, Casing Power Supply Port including Cables as per Department Incharge 583 Supplying of Refrigerator(Storage & Interior Description : | Cooling Type ; Frost Free | Display Type ; Thermostat | Shelf Material ; Toughened Glass | Compressor Type ; Reciprocatory)as per Department Incharge 584 Supplying of Microwave(Special Features: Quartz Heater - Concealed Heating. Safer Cooking, Stainless Steel Cavity - More Hygienic. More Durable, Child Lock - Ensures complete safety especially for homes with young children, Interior light)as per Department Incharge 585 Supplying of Washing Machine( Fully automatic 6 kg) as per Department Incharge 586 Supplying of Sewing Machine(Motorised)as per Department Incharge 587 Supplying of Weighting Machineas per Department Incharge 588 Supplying of Blood Pressure Monitor as per Department Incharge 589 Supplying of Oximeter as per Department Incharge 590 Supplying of Gluco Meter as per Department Incharge 591 Supplying of Test Tube & Breakers as per Department Incharge 592 Supplying of RO Water Purifier as per Department Incharge 593 Supplying of Microscope(Student) as per Department Incharge 594 Supplying of Crockery Set as per Department Incharge 595 Supplying of Cocking Utensils set as per Department Incharge 596 Supplying of Cutlery Set as per Department Incharge 597 Supplying of Sofa Set + Centre Table as per Department Incharge 598 Supplying of A.C (Split 2 Ton,3 Star,Twin invertor HD Compressor)as per Department Incharge 599 Supplying of Stabilizer(Automatic Voltage Stabilizer,37.4 x 27.1 x 19.8 Centimeters,5 kg 700 g)as per Department Incharge 600 Supplying of Inveter with battery(Capacity -100AH,Battery Type-Tubular Battery,Warranty-1 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 1 FAN ,28 Light , 8 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 601 Supplying of Desktop Computer with UPS and Computer Tableas per Department Incharge 602 Supplying of Original operating system software window 10 with Antivirus as per Department Incharge 603 Supplying of Printer with scanner (inkjet,Colour/B/W)as per Department Incharge 604 Supplying of Dining Table Set as per Department Incharge 605 Supplying of Camera as per Department Incharge 606 Supplying of Mixer Grinder as per Department Incharge 607 Supplying of Iron as per Department Incharge 608 Supplying of Wall Clockas per Department Incharge 609 Supplying of Whole tailoring Equipments (Local) as per Department Incharge 610 Supplying of Knitting Equipments(Local) as per Department Incharge 611 Supplying of Flower Arrangement Equipments) (local) as per Department Incharge 612 Supplying of Aluminium Set as per Department Incharge 613 Supplying of Plastic Tub as per Department Incharge 614 Supplying of Dustbin(Big) as per Department Incharge 615 Supplying of Basket &Mug as per Department Incharge 616 Supplying of White Table Cloth(Big size)as per Department Incharge 617 Supplying of Wash Basin(Local)as per Department Incharge 618 Supplying of Gas Stove +Cylinderas per Department Incharge 619 Supplying of Curtains(Local) as per Department Incharge 620 Supplying of Floor Mats (Local) as per Department Incharge 621 Supplying of Tube Lightas per Department Incharge 622 Supplying of Fan as per Department Incharge 623 Supplying of Led Projector(New Edition)as per Department Incharge 624 Supplying of Smart Board(specification:white,power consumption<150w ,usage-school,Effective touch-65x46) as per Department Incharge 625 Supplying of Decorative Items(Local) as per Department Incharge 626 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 60 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 15000 ppm,Features-Two-sided printing,Weight-25kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scanner multi as per Department Incharge 627 Supplying of Ceiling Fanas per Department Incharge 628 Supplying of Exhaust Fan as per Department Incharge 629 Supplying of Pedestal Fan as per Department Incharge 630 Supplying of Inveter with battery(Capacity -200AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 14 Hrs Backup- 4 FAN , 8 Light , 14 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 631 Supplying of Wooden Stool(Local) as per Department Incharge 632 Supplying of Wash Basin (Local) as per Department Incharge 633 Supplying of Register (Local) as per Department Incharge 634 Supplying of Stabilizer for ACas per Department Incharge 635 Supplying of Tubelightas per Department Incharge 636 Supplying of Dustbin (Local) as per Department Incharge 637 Supplying of Curtains (Window and Door) (Local)as per Department Incharge 638 Supplying of Door Mat(Local) as per Department Incharge 639 Supplying of Broadband(Wifi)as per Department Incharge 640 Supplying of Furniture Bookshelves, Study Tables and Chairs for attendant and students (30 students at a time) as per Department Incharge 641 Supplying of Wireless mic as per Department Incharge 642 Supplying of Weight Box(100g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 643 Supplying of Weight Box(50g std.) :- Containing 10 cynlinders of the same size and shape but different in weight as per Department Incharge 644 Supplying of Kymograph :-with smoked paper, smoked Drum, Time marker as per Department Incharge 645 Supplying of Memory Drum :- Electrical operated as per Department Incharge 646 Supplying of Memory Drum :- Hand operated as per Department Incharge 647 Supplying of Metronome :- Mechanical as per Department Incharge 648 Supplying of Porteuz Maze Test as per Department Incharge 649 Supplying of Techisto-scope :- Fall Drop type as per Department Incharge 650 Supplying of Techisto-scope :-Electronic as per Department Incharge 651 Supplying of Verniers chronoscope :- Pendulum Type as per Department Incharge 652 Supplying of Ergograph/Smoke drum /smoke paper varshing tray and varnish :- Hand grip model as per Department Incharge 653 Supplying of Weight 6Kg as per Department Incharge 654 Supplying of Multiplication sheets(100sheet) as per Department Incharge 655 Supplying of Screen:- Wooden as per Department Incharge 656 Supplying of Ravens Progressive Matrices as per Department Incharge 657 Supplying of Weschlers Intelligence scale (Adult) as per Department Incharge 658 Supplying of Cattles 16 PF Questionnaire as per Department Incharge 659 Supplying of Jungs Word Association Test as per Department Incharge 660 Supplying of Thematics Apperception Test as per Department Incharge 661 Supplying of Zeigarnik Effect Test as per Department Incharge 662 Supplying of The Occupational Stress Index(OSI) Scale by A.K Shrivastawa and A.P. Singh as per Department Incharge 663 Supplying of Rorschach Test as per Department Incharge 664 Supplying of Coping Strategies Test by A.K. Shrivastava as per Department Incharge 665 Supplying of Job Satisfaction scale(JSS) by Amar Singh and T.R. Sharma as per Department Incharge 666 Supplying of Job Involvement Scale by A.K. Singh and R. Kapoor as per Department Incharge. 667 Supplying ofOrganizational Climate Scale by Somnath Chatopadhya and K.G. Agarwal as per Department Incharge 668 Supplying of Managerial Aptitude Scale(MAS) by Santosh Dhar, Upinder Dhar and Priyanka Sharma as per Department Incharge 669 Supplying of Employees Motivational Scale by A.K. Shrivastava as per Department Incharge 670 Supplying of Employees Mental Health Inventory (EMHI) by Jagdish as per Department Incharge 671 Supplying of Beck Depression Inventory by Arron Beck as per Department Incharge 672 Supplying of Aggration Scale (AS) by G.P. Mathur and Rajkumar Bhatnagar as per Department Incharge 673 Supplying of Ego Strength Scale by Q. Hassan as per Department Incharge 674 Supplying of Bells Adjustment Iventory by S.M. Mohsin and Shamshad as per Department Incharge 675 Supplying of Marital Adjustment Questionnaire by P. Kumar and kanchan Rohtagi as per Department Incharge 676 Supplying of Sacks Sentence Completion Test as per Department Incharge 677 Supplying of PGI Health Questionnaire N-1 (PGIHQN) by S.K. Verma, N.N. Wig and D. Prasad as per Department Incharge 678 Supplying of Rotters Locus of Control Scal by Anand Kumar and S.N Srivastava as per Department Incharge 679 Supplying of Self Concept Inventory by O.N Srivastava as per Department Incharge 680 Supplying of PGI Social Support Scale by S.K. Verma, P. Kulhara and Ritu Nehraas per Department Incharge 681 Supplying of Emotiobnal Maturity Scale(EMS) by R.R. Trtipathi as per Department Incharge 682 Supplying of Life satisfaction Scale(LSS) by Q.G. Alam and R. Srivastava as per Department Incharge 683 Supplying of PGI Quality of Life Scale by S.K Verma and A.C. Moudgil as per Department Incharge 684 Supplying of Environmental Awareness Scale (EAS) by Haseen Taj as per Department Incharge 685 Supplying of Jatota Test of Group Mental ability as per Department Incharge 686 Supplying of Weinsteins Noise Sensitivy Scale (WNSS)(Shore Samvedi Mapak) by P. Bhatia, S. Mohar and I.S Mohar as per Department Incharge 687 Supplying of State Traight Anxiety Test (STAT) as per Department Incharge 688 Supplying of Xerox Machines (Digital)(Product Specification:Copy | Print | Scan | Fax,Number Of Trays-2,Item Color-Black,Duty Cycle-20000,Print Technology-LaserPrint Speed-25 Paper Per Minute ) as per Department Incharge 689 Supplying of Binding Machine (Product Specification:Capacity-12-15 Sheets,Binding Style-Manual ,Max Binding Thickness<20 mm Max Binding Sheet Width 200-300 mm,Automatic Grade-Semi-Automatic,Weight-5.8Kgs Approx.,Dimension-375x230x150mm Approx.Automation Grade,Hole Size-3x8mm,Paper Size-A4 /Letter /A5 etc,Packaging Weight-375 mm,Handle Type-metal,Packaging Size-375x230x150mm Approx.Adjustable Margin-2.5/4.5/6.5mm,Usage/Application-Comb Binding Method Of Operation-Manual,No Of Punch Holes-21 holes Number Of Punch Slots-21 holes,Size-A4,Number Of Punch Holes-21 holes,Machine Dimension-375x230x150mm Approx.Is It Padded)as per Department Incharge 690 Supplying of Printers(Ink End Sensor-yes,paper storage capacity-100 sheets Paper Input, 50 sheets Paper Output-printing technology ink tank,connecter type-Wi-Fi, USB,special feature-Cost per print - 9 paise (Black & White), 33 paise (Colour) as per Department Incharge 691 Supplying of Furnishing (Book shelves:Study table and chair)as per Department Incharge 692 Supplying of Book Case(for Psychological Tests) as per Department Incharge 693 Supplying of Open Racks as per Department Incharge 694 Supplying of Inveter with battery(Capacity -150AH,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit, Over Temperature, Battery Deep -Discharge,Backup Time 8 Hrs Backup- 2 FAN , 2 Light , 12 Hrs Backup - 1FAN ,1 Light Battery Condition-New) as per Department Incharge 695 Supplying of Inverter with Battery(Capacity-150,Battery Type-Tubular Battery,Warranty-3 years,Protection From Short Circuit Backup Time-5hrs,Battery Condition-New)as per Department Incharge 696 Supplying of Desktop(Product Specification:Hard Drive Capacity-320GB,Operating System-Window,Screen Size-17 inch Processor-i5,Display Type LCD Processor) as per Department Incharge 697 Supplying of Tally sofware (Multi User) as per Department Incharge 698 Supplying of Barcode Machine(Product Specification:Type-Thermal Printers,Max Printing Size-10 IPS,Resolution (dpi)-203dpi Model/Type-Citizen CLS-700,Automatic Grade-Fully Automatic Print Line-1~3 Lines) as per Department Incharge 699 Supplying of Server Machines(Product Specification:Memory-1x16 GB RAM/ Open Bay- 2.5 Hot Swap SAS/ SATA,Power Supply 220 V,Networking Type-LAN,Number Of Ports/Channels-8 USB Port-Yes Processor Speed Intel Xeon Silver 4114 (Deca Core) 2.2GHz Power Consumption 750 W) as per Department Incharge 700 Supplying of LAN connection between 7 computers as per Department Incharge 701 Supplying of Xerox Machine (Specification-Functions:Print | Scan | Copy,Technology -Laser,Print speed-upto 30 pages/min,Paper size-A4,Connectivity-Wireless(Wi-Fi),Color output-Color | B&W, Print Volume(per month) -above 10000 ppm,Features-Two-sided printing,Weight-16.8kg,Dimension-451 x 460 x 360mm,Scanner type Flatbed scannercannon image Class MF641CW multi as per Department Incharge 702 Supplying of Lamination Machine(Paper size-A4,A3,FS,max laminating width-330mm,Laminating speed-600mm)as per Department Incharge 703 Supplying of Binding Machine (Punches-43 holes,Hole distance-43 holes in A 11 SHEET,Binding sizes:Max 11) as per Department Incharge 704 Supplying of Computers (Processor -AMD Ryzen 3,RAM-8GB,HDD-512 GB,screen size-19.5 inches,Operating system:Windows 11 )as per Department Incharge 705 Supplying of Office Computer (Processor:i5 10th,HDD:1 TB,RAM-4 GB,GT730 4GB Graphics) as per Department Incharge 706 Supplying oflaser printer(Product Specification:Color Output-Black & White,Function-Print | Scan | Copy,Max. Print Speed (Black)-18 ppm Max. Print Speed (Color)-17 ppm,Connectivity-Ethernet,Paper Size-A4,Print Volume-Up to 500 pages/month) as per Department Incharge 707 Supplying of Smart class Board(Power consumption:220-300V,size/Dimension-65,Input type-finger Touch) per Department Incharge 708 Supplying of Double battery(capacity-250Ah,Over current protection) Inverter(Back up time-5 hrs) as per Department Incharge 709 Supplying of Desktop Computers :- HP 23.8-inch FHD All in One Desktop with Alexa Built-in(10th Gen Intel Core i3- 1005G1/8GB/512 GB SSD/Windows 10/MS Office 2019/Natural Silver), 24-dp0816in as per Department Incharge 710 Supplying of Printer, ScannerMulti-Function Direct Wireless Network Laser Printer (Print, copy, scan, Black) as per Department Incharge 711 Supplying of Networking (LAN, leased lines, wi-fi, switches etc.) TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200Mbps Wi-Fi Speed, 5 Gigabit Ports, 4 External Antennas and 1 Internal Antenna WiFi Coverage with Access as per Department Incharge 712 Supplying of Back up support(UPS, Generator, Transformer):-600VA UPS for Desktop/PC/Computers(not for Routers) with Automatic Voltage Regulation as per Department Incharge 713 Supplying of Xerox Machine:- (IR2004 With Duplex, Platen cover & Toner, Resolution (DPI):600 X 600dpi, Duty Cycle:4.3 Sec) as per Department Incharge 714 Supplying of IBM SPSS(Statistics Package Latest Version) as per Department Incharge 715 Supplying of Nvovo(Package) as per Department Incharge 716 Supplying of LCD Projector:- 1)Project movies,images or data from your devices,most effective in dark settings 2)Projector, Lens Cover/Stand, Carrying Pounch, USB Cable 3) Connect via Wi-Fi to Android smartphones and tables or connect HDMI to iPhone or iPad as per Department Incharge 717 Supplying of Projector Screen:- 1)10 Feet x 6 Feet, 133 Dia, 16:9 Format, UHD-3D-4K 2)Comes with FULL HD 1080P 3D and 4K Viewing Technology, Anti UV coating as per Department Incharge 718 Supplying of DTH connection:- 1)HD Set Top Box 2)Recording facility as per Department Incharge 719 Supplying of Television Set:- 1) Smart LED TV-42 inches 2)4K UHD (Resolution:3840x2160) 3)Connectivity-Input:3*HDMI,3*USB 4)Audio:20W output 5) 4K HDR provides exceptional clarity 6)Smartphone connectivity : Photo sharing plus, screen mirroring as per Department Incharge 720 Supplying of as per Desktop:- Intel i7, 8th Gen, 4GB N-Vidia Geforce Graphics card, 16 GB RAM, Monitor, CPU, Mouse, key board partment Incharge 721 Supplying of Multifunction Laser Printer,Scanner, and Copier :- Functionality: Print, Scan,Copy Print Technology : Monochrome Laser Connectivity: Hi-speed USB, Compatible with USB 2.0 Specifications4as per Department Incharge 722 Supplying of Speaker 7.1 surround stereo(Power -100W,Play tme-11 hours,Voice Range-9m) as per Department Incharge 723 Supplying of Digital SLR Camera: 1)EOS full HD movie mode with movie service 2)18 megapixel CMOS)APS-(sensor 3)14-bit A/D conversion 4)ISO 100-12800)EXPANDABLE TO h:25600(5)Dual Lens camera 55-250mm IS II lens 6) Camera battery charger and bag 7)Wide strap USB cable, software CD. as per Department Incharge 724 Supplying of 24.2MP DigitalSLR Camera:- 1)100% Viewfinder Coverage 2)CMOS sensor with impressive high-resolution result 3)Camera battery, charger, and bag 4)Wide strap USB cable, software CD, manual as per Department Incharge 725 Supplying of Quark express as per Department Incharge 726 Supplying of Adobe Suite(CS6 Master Collection) as per Department Incharge 727 Supplying of Cool Edit Pro as per Department Incharge 728 Supplying of Turnitin as per Department Incharge 729 Supplying of Sound Forge as per Department Incharge 730 Supplying of 18-55mm normal lens as per Department Incharge 731 Supplying of 55-250mm Zoom lens as per Department Incharge 732 Supplying of 18-135mm lens as per Department Incharge 733 Supplying of 35mm prime lens as per Department Incharge 734 Supplying of 80mm macro lensas per Department Incharge 735 Supplying of Tripods as per Department Incharge 736 Supplying of DSLR:- 1)Powered by NP-F570 InfoLithium rechargeble battery pack 2)Records to MiniDV tape stock 3)16:9 widescreen recording 4)3CCD video camera 5)12x optical zoom lens 6)Records to MiniDV tape stock as per Department Incharge 737 Supplying of:- 1)3CCD video camera 2) Crystal Engine 3)Shoulder -Type Design 3)One Touch Navigation 4)Manual Focus Ring 5) 0 lux colour light view 6)10x optical zoom 6)500x digital zoom 7)Super image stabilizer 8) DV IN/OUT Terminal 8)5-mode programme AE: sports, portrait, low light, spot light, and surf &snow 9)SP/I.P recording 10)Back light compensation 11) Cinema mode )16:9 aspect ratio( 12)Infra-red remote controller as per Department Incharge 738 Supplying of Tripods:- 1)3-way head with adjustable pan 2)Steady rubberized legs 3)Multipurpose head with quick release 4)Multipupose head for DV cameras 5)Made from High Grade Aliminium Alloy 6)Quik flip leg locks 7)Fluid pan&tilt movement 8)Quik release plate& Bubble Level as per Department Incharge 739 Supplying of i-Mac(Product Specification,Storage Capacity-256 GB Display-24 inch,Memory Size-256gb ssd,assembled Product Dimensions L X W X H,461 mm x 547 mm x 130 mm, 4.48 kg Color-Silver & Blue,Graphics-8_core GPU,Video Support And Camera 4.5K,Bluetooth-Bluetooth 5.0,Weight-4.48kg,Operating System-macOS Big Sur,Processor- M1Echip,Line Voltage-100-240V AC) for Video Editing as per Department Incharge 740 Supplying of Photographic Design Flash Bender-Small Reflector:- 1) Make a bounce flash reflector, gobo, or snoot 2)Packs flat/great for travel 3)Attaches quickly & securely 4)Adjustable to fit all popular brands of accessory flash 5)For on-camera or off-camera flash as per Department Incharge 741 Supplying of Rim Collapsible softbox Diffuser with Rim :-1)Softbox 36 inches/90 Centimeters with Grey Rim and Bowens Mount, Portable and Quick Folding Softbox Diffuser for Photography Speedlites Flash Monolight 2)for 660 LED Panel-Outer 16.3x6.5 inches,Inner 9.8x8.7 inches Collapsible Light Reflector 3)with Stap Attachment and Carrying Bag for Photo Studio Portrait Video Shooting as per Department Incharge 742 Supplying of Handheld Camera Stabilizer with Quik Release for DSLR:- 1)Light weight, handheld video image stabilization 2)FlyCam 3000 video cam stabilizer accepts camera upto 3.5kg/7.7Ibs. 3)Easy attach a small LCD monitor with Flycam 3000 cam stabilizer when needed. 4)Precision Aluminum made 5)23 tall and just 207 Ibs without counter balance disc. as per Department Incharge 743 Supplying of Green/Blue matte screen )Chroma key( :- 1)8x12 ft Blackboard, perfect for television, video production and digital photography. 2)Rod pocket on each top edge allows to be draped or hung. 3)Finishing along all edges to prevent tears. 4)Made of 100 %pure cotton, good vertical sense and durable as per Department Incharge 744 Supplying of Professional Grade Backdrop Cum Light Stand of 8 Feet Height:- 1)Photography Backdrop Stand Kit. 2)Stand of 8 Feet Height 3)8x12 ft Blackboard, perfect for television, video production and digital photography. 4) Package Contents; 1Pcs White Backdrop , 1Pcs Black Backdrop and Set of Black Backdrop stand. 5)Bag to carry as per Department Incharge 745 Supplying of Video Mixer (Four Channel Digital Video Mixer With Effects, including installation and training):- 1) four channel video mixer by incorportating HDMI inputs/outputs, USB streaming, HDCP support, built-in touch multi-viewer, and audio embedding . 2)(3Input)SD HDMI/Composite +(1Input) Up to1080p HDMI/RGB/Component/Composite. 3) PGM Output) Up to 1080p HDMI + RGB/Component +Composite +(PVW Output)PVW/Multiviewer(. 4)480p/576p Progressive internal processing 5.) Built-in multi-viewer ith touch control 6). Built-in frame synchronizers on all inputs 7). Scalers on CH 4 and Output 8). 259 Transitions 148 Effects 9). HDCP Compliant 10) Audio Embedding 11) Audio Mixer & Delay -up to 4 Fframes 12) USB Streaming Out for web-streaming 13) Video Processing:4:2:2 )Y/b/Pr(8 bits)Internal Processing :480/59.94p when set to NTSC, 576/50p when set to PAL( 14) Input Formats :HDMIVideo: INPUT 1 to3 : reqyires 720x480/59.94p )when set to NTSC( 576/50p ) When set to PAL(15) Input Formats : HDMI and Component Video : INPUT 4:480/59.94p, 720/59.94p, 1080/59.94i, 1080/59.94p )when set to NTSC (576/50i, 576/50p, 720/50p, 1080/50i, 1080/50p )when set PAL( as per Department Incharge 746 Supplying of Studio Condenser Microphone :- 1)Professional, large-diaphragm condenser microphone for unsurpassed audio quality 2) Idea as Mian and support microphone for studio and live applications. 3) Cardioid pickup pattern for outstanding sound source separation and feedback rejection 4)Pressure-gradient transducer with shock-mounted capsule. 5)Ultra-low noise, transformerless FET inputeliminates low-frequency distortion. 6) LED indicates phantom power operation. 7)Swivel stand mount and transport case included. 8)Ultra-rugged construction with metal die-cast body 8)Gold-plated 3-pin XLR output connector for highest signal integrityas per Department Incharge 747 Supplying of Digital Monitor/Speaker System(in Pair) :- 1)Two-way active monitor system for multimedia workstations and keyboard monitoring 2)High-power woofers and tweeters powered provided a linear frequency response 3)optical and coaxial inputs to directly connect digital audio sources via S/PDIF interface 4)Two stereo analogue inputs featuring 1/8 TRS and stereo RCA connectors can be used simultaneously or mixed with a digital stereo source 5)Features 1/4 TRS headphone connector with auto-mute function easily accessible from the front panel 6)2x Stereo Anaog Inputs )TRS and Stereo RCA Connectors( 7) 1/4-inch TRS headphone connector with Auto-mute Loudspeaker Function 8)1/8-inch TRS and Stereo RCA connectors as per Department Incharge 748 Supplying of Lapel Clip-on Microphone for DSLRs Camcorders Video Cameras and Iphone Smart Phone :- 1)Omni directional lavalier microphone, designed for Smartphones, DSLR, Camcorders, Audio recorders PC etc, perfect for video use. 2) With Omni pickup pattern, for full 360A coverage, 3) minimum 6-meter )20(cable with 3.5mm 4-pole gold plug for smarty phone connection as per Department Incharge 749 Supplying of Micophone Stand:- Steel stands for hand held microphones in studio with a base supporting system as per Department Incharge 750 Supplying of MP3 Digital Voice IC Recorder LCD :- 1)Digital Voice IC Recorder 2)LCD Screen 3) 23hrs life with 4GB Memory as per Department Incharge
Contract Date: Jun 17, 2026 Contract Value : ₹ 78.07 Crore
Government Departments No of Bidders 9
Jharkhand View Result →
37.
Housing Urban and Rular Development #10181924 Price Bid
Development Of It And Allied Infrastructure For Temporary Vulnerable Witness Deposition Centre ( Vwdc ) Of The Sub-Divisional Court At Nabadwip, Nadia [ Job No: Kit / Ow / 231 Of 23-24 ] - 1 Sitc Of Layer 2, 24 Port, Poe Enabled, 370 Watt, Full Managed Only, 1Ru, Ge Switch, With Perpetual License Of Oem, Having Minimum Technical Specificationa ) 24 X 10 / 100 / 1000Base-T Mbps Poe+ Enabled Host Ports ( Minimum ) ; B ) 4 X 1 / 10Ge Sfp+Port; And 2 X 10 / 100 / 1000 Base-T Additional Other Than Above Ports; C ) The Switch Should Have 168 Gbps Of Switching Capacity And 125 Mpps Throughput Capacityas Per Details Specification Document Uploaded Separatelyref. Make: Zyxel, Cisco, Juniper, Extreme, Huawei, Aruba, Warranty: 01 ( One ) Years Onsite Comprehensive Oem Warranty Including With Perpetual License, Parts, And Service Except Force Majeure. 2 Sitc Of Ip 2Mp Ir Dome Camera Complete With Perpetual License With Motorized Varifocal Lens Having Minimum Technical Specificationimage Sensor: 1 / 2.8” Progressive Scan Cmos; Min. Illumination: Color: 0.002 Lux @ ( F1.2-1.7, Agc On ) , 0.0002 Lux @ ( F1.2-1.7, Agc On ) , 0 Lux With Ir; Shutter Speed: 1 / 3 S To 1 / 100, 000 S; Focal Length: 2.7 To 13.5 Mm; Aperture: F1.2 To F1.7 With Auto Focus; Lens Mount: Ø14; Ir Range: 40 M Or Higher; As Per Details Specification Document Uploaded Separatelyref. Make: Honeywell, Infinova, Hanwha, Idis, Hikvision, Warranty: 01 ( One ) Years Onsite Comprehensive Oem Warranty Including With Perpetual License, Parts, And Service Except Force Majeure. 3 Sitc Of 16 Channel Fully Featured Ip 4K Network Video Recorder Having Minimum Technical Specificationvideo Input: 16 Channel Ip Fully Featured Nvr; Audio Iuput / Output: 1 Channel Input / 2 Channel Outputs, Rca; Display Interface: 2 Hdmi ( 1 Hdmi Up To 3840 × 2160 ) ; 2 Vga; Record Bit Rate: 320Mbps; Bit Rate: 16 Kbps ~ 20 Mbps, Per Channel; Network Throughput: Input 320Mbps; Output 256Mbps;As Per Details Specification Document Uploaded Separatelyref. Make: Honeywell, Infinova, Hanwha, Idis, Hikvision, Warranty: 01 ( One ) Years Onsite Comprehensive Oem Warranty Including With Perpetual License, Parts, And Service Except Force Majeure. 4 Sitc Of Surveillance Grade Hdd 8Tb Storage Capacity Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Seagate, Western Digital, Sony, Hitachi, Warranty: 01 ( One ) Years Onsite Comprehensive Oem Warranty Including With Perpetual License, Parts, And Service Except Force Majeure. 5 Sitc Of 1 X 03 Kva Rack Mount Online Ups ( 1-Ph To 1-Ph ) System With 1 X 4680 Vah ( Min ) Back-Up Battery And Other Accessories Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make ( Ups ) : Schneider, Apc, Delta, Vertiv, Avo, Orion, Hitachi, Eaton;Ref. Make ( Battery ) : Amararaja-Quanta, Exide, Warranty: 01 ( One ) Years Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 6 Sitc Of 1 X 01 Kva Rack Mount Online Ups ( 1-Ph To 1-Ph ) System With Inbuilt 1 X 168 Vah ( Min ) Back-Up Battery And Other Accessories Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make ( Ups ) : Schneider, Apc, Delta, Vertiv, Avo, Orion, Hitachi, Eaton;Ref. Make ( Battery ) : Amararaja-Quanta, Exide, Warranty: 01 ( One ) Years Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 7 Sitc Of Ups Sub-Db 250V, 16Way Spn Mcbdb Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Schneider, Legrand, Hager, Siemens, L&T, Abb, Havellswarranty: 01 ( One ) Years Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 8 Sitc Of Wall Mount Speaker Having Minimum Technical Specificationtype: 2-Way, Bass Reflex Wall Speakers; Frequency Range ( -10Db ) : 62Hz - 20Khz; Nominal Coverage: H ( 120 ) X V ( 120 ) ; Components: 5.25 Cone & 0.75 Soft Dome; Power Rating: 150W; Nominal Impedance: 8O; Tap: 30W ( 330O ) , 15W ( 670O ) , 7.5W ( 1.3Ko ) ; Max Spl: 114Db Spl;As Per Details Specification Document Uploaded Separatelyref. Make: Bosch, Sennheiser, Yamaha, Jbl ( Harman ) , L-Acoustics, Electro Voice, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 9 Sitc Of 2 Channel Power Amplifier Having Minimum Technical Specificationclass D, Two ( 2 ) Channel Power Amplifier With Output Power @ 1Khz ( Thd+N=1%: 4O ) 120W X 2;As Per Details Specification Document Uploaded Separatelyref. Make: Yamaha, Sonodyne, Qsc, Crown ( Harman ) , L-Acoustics, D&B, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 10 Sitc Of Analog Mixer, 24-Channel Mixing Console Having Minimum Technical Specification24 Line Inputs ( 16 Mono, 4 Stereo ) , 16 Mic Inputs With 48V Phantom Power And Hph Per Channel.As Per Details Specification Document Uploaded Separatelyref. Make: Yamaha, Sonodyne, Qsc, Crown ( Harman ) , L-Acoustics, D&B, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 11 Sitc Of Wired Gooseneck Microphone Having Minimum Technical Specificationsupply Of Pre-Polarized Condenser Gooseneck Microphone With Overall Length Of 450Mm Or Better, With Xlr3m-Type Connector, Shall Offer Radio Frequency Interference ( Rfi ) Shielding Against Intermodulation From Wireless Equipment Or Devices.As Per Details Specification Document Uploaded Separatelyref. Make: Sennheiser, Shure, Akg, Rode, Clock Audio, Audix, Bosch, Dpa Microphones, Studiomaster, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 12 .Sitc Of Base For Gooseneck Microphone Having Minimum Technical Specificationbi-Colored Light Ring For Clear Visual Feedback; Logical Function For Easy Control Of E.G. Cameras; Microphone Modes: Toggle On / Off; Push To Mute; Push To Talk; Permanent On ( External Led Control ) .As Per Details Specification Document Uploaded Separatelyref. Make: Sennheiser, Shure, Akg, Rode, Clock Audio, Audix, Bosch, Dpa Microphones, Studiomaster, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 13 Sitc Of 55-Inch Non-Touch Commercial Led Uhd Display ( Indoor Type ) Having Minimum Technical Specificationdiagonal Size: 55 Inch; Panel Technology: Ips; Resolution: 3840 * 2160 Pixels @ 50 Hz; Brightness: 440 Nits; Static Contrast Ratio: 1200:1; Operational Hour: 24 X 7;As Per Details Specification Document Uploaded Separatelyref. Make: Sony, Panasonic, Delta, Nec, Sharp, Lg, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 14 Sitc Of 32-Inch Non-Touch Commercial Led Hd Display ( Indoor Type ) Having Minimum Technical Specificationdiagonal Size: 32 Inch; Panel Technology: Ips; Resolution: 1333 * 768 Pixels @ 50 Hz; Brightness: 350 Nits; Static Contrast Ratio: 1100:1; Operational Hour: 16 X 7;As Per Details Specification Document Uploaded Separatelyref. Make: Sony, Panasonic, Delta, Nec, Sharp, Lg, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 15 Sitc Of 12X Fhd Ptz Camera For Student Having Minimum Technical Specificationfull Hd Ptz Camera Supporting 1080P At 60 Frames Per Second, Minimum 12X Optical Zoom Withfov Of 72 Degree And Minimum 255 Presets. Camera Should Support Simultaneous Outputs Through Ip, Hdmi, Usb 3.0 & 3G-Sdi Output And Can Be Controlled Via Rs232 / 422 And Ip Controls. As Per Details Specification Document Uploaded Separatelyref. Make: Panasonic, Lumens, Peoplelink, Polycom, Avaya, Globus, Wolfvision, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 16 Sitc Of Document Camera Having Minimum Technical Specificationfull Hd Portable Document Camera, 12X Optical Zoom, 10X Digital Zoom, Hdmi In, Hdmi Output, Inbuilt Storageas Per Details Specification Document Uploaded Separatelyref. Make: Lumens, Epson, Elmo, Wolfvision, Samsung, Canon, Peoplelinkwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 17 Sitc Of Stereo Professional Headphones Having Minimum Technical Specificationover-Ear, Headphone. Headphone Type: Dynamic, Closed; Magnet Type: Neodymium; Driver Size: 40.0 Mm; Frequency Response: 10-20Khz; Impedance: 63 Ohms; Sensitivity: 106 Db / W / M;As Per Details Specification Document Uploaded Separatelyref. Make: Sony, Sennheiser, Bose, Panasonic, Yamaha, Jbl, Logitechwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 18 Sitc Of Hd Audio-Video Live Production Switcher Having Minimum Technical Specificationconnections: Total Video Inputs: 20; Total Video Outputs: 12; Sdi Rates: 1.5G, 3G; Total Audio Inputs: 2 X Balanced 1 / 4 Inch Jack, 1 X 5 Pin Xlr Talkback.; Total Audio Outputs: 1 X 5 Pin Xlr Talkback.; Sdi Audio Inputs: 2 Ch Embedded Audio On All Sdi Inputs.; Sdi Audio Outputs: 2 Ch Embedded Audio On All Sdi Outputs.; Total Multi Views: 2 X 3G-Sdi; Control Panel Connection: Ethernet. Direct Connection Between Panel And Chassis, Or Via Network.; Ethernet: Supports 10 / 100 / 1000 Base-T.As Per Details Specification Document Uploaded Separatelyref. Make: Beyerdynamic Design, Aten, Extron, Lightware, Kramer, Crestron, Canare, Cypress, Seada, Aja, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 19 Sitc Of Audio-Video Recording System For Recording And Streaming Having Minimum Technical Specification:Sdi Video Inputs - 1, Sdi Video Outputs - 2, Sdi Monitor Outputs - 1, Sdi Rates - 270Mb, 1.5G, 3G, 6G Hdmi 2.0 Video Inputs - 1, Hdmi 2.0 Video Outputs - 1, Built In Speaker - Mono, Audio Output - 1 X 6.35 Mm Headphone Jack, Sdi Audio Inputs - 16 Channels Embedded Audio, Sdi Audio Outputs - 16 Channels Embedded Audio, Hdmi Audio Inputs - 8 Channels Embedded Audio, Hdmi Audio Outputs - 8 Channels Embedded Audio, As Per Details Specification Document Uploaded Separatelyref. Make: Beyerdynamic Design, Aten, Extron, Lightware, Kramer, Crestron, Canare, Cypress, Seada, Aja, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 20 Sitc Of Live Video Streaming System Having Minimum Technical Specification:Hdmi / Vga To Hdmi Live Video Streaming And Recording System For Recording And Streaming Live Sessions, Support Upto 4K Uhd+ Resolutions, Built-In Audio Embedding And Mixing Support, Compatible With Facebook, You Tube Or Any Third-Party Cloud, Control Via Front Panel Buttons, Webgui, Telnet, Rs-232 And Ir.As Per Details Specification Document Uploaded Separatelyref. Make: Beyerdynamic Design, Aten, Extron, Lightware, Kramer, Crestron, Canare, Cypress, Seada, Aja, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 21 Sitc Of Intel Core I3 Desktop Computer Having Minimum Technical Specificationdesktop With Intel Core I3-12100 With Intel Uhd Graphics 730, 8Gb Ddr4 Ram, 512Gd M.2 Ssd, 21.5 Display, Integrated Gigabit 10 / 100 / 1000, Dual Band Wi-Fi 802.11 A / B / G / N / Ac & Bluetooth 5.0 Combo, Windows 11 Pro 64Bit Preloaded With Quick Heal Total Security Single User For 01 ( One ) Year.As Per Details Specification Document Uploaded Separatelyref. Make: Hp, Dellwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 22 Sitc Of 1Tb Internal Ssd Hard Disc Drive Having Minimum Technical Specificationform Factor: 2.5-Inch ( 7Mm ) ; Capacity: 1Tb; Interface: Sata ( 6Gb / S ) ;As Per Details Specification Document Uploaded Separatelyref. Make: Samsung, Dell, Hp, Wd, Sony, Crucial, Transcend, Seagatewarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 23 Sitc Of 4Tb Portable Hard Disc Drive Having Minimum Technical Specificationform Factor: 2.5 Inch; Capacity: 4Tb; Interface: Sata ( 6Gb / S ) ; Interface: Usb 3.2 Gen 1, Usb 3.0, Usb 2.0; Transfer Speed: Sequential Read: Up To 540Mb / Sec;Sequential Write: Up To 500 Mb / Sec; As Per Details Specification Document Uploaded Separatelyref. Make: Samsung, Dell, Hp, Wd, Sony, Crucial, Transcend, Seagatewarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 24 Sitc Of Micro Bi-Directional Sdi / Hdmi 3G Converter Having Minimum Technical Specificationsdi Video Inputs - 1 X Sd, Hd Or 3G-Sdi, Sdi Video Outputs - Automatically Matches The Hdmi Video Input, Hdmi Video Inputs - Hdmi Type A In, Hdmi Outputs - Hdmi Type A Out, Multi Rate Support - Auto Detection Of Sd Or Hd, Updates, Configurations And Power - Usb Type-C.As Per Details Specification Document Uploaded Separatelyref. Make: Beyerdynamic Design, Aten, Extron, Lightware, Kramer, Crestron, Canare, Cypress, Seada, Aja, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 25 Sitc Of Mini Up-Down-Cross Hd Sdi / Hdmi 3G Converter Having Minimum Technical Specificationsdi Video Inputs - 1 X Sd, Hd Or 3G-Sdi Video Input And 1 X External Reference Input, Hdmi Video Input - 1 X Hdmi Type A Connector, Sdi Video Outputs - 1 X Loop Out And 2 X Outputs, Hdmi Video Output - Hdmi Type A Out. Output Supports Edid Of The Monitor, Sdi Rates - 270Mb, 1.5G, 3G.As Per Details Specification Document Uploaded Separatelyref. Make: Beyerdynamic Design, Aten, Extron, Lightware, Kramer, Crestron, Canare, Cypress, Seada, Aja, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 26 Sitc Of 1-In To 2-Out Hdmi Splitter Having Minimum Technical Specificationit Should Connects One Hdmi Source To Two Hdmi Displays At The Same Time; It Should Support Hdmi ( 3D, Deep Color, 4Kx2k ) ; Hdcp 1.4 Compliant; It Should Support Max. Resolution Up To 4096 X 2160 / 3840 X 2160 @ 60Hz ( 2:2:0 ) 4096 X 2160 / 3840 X 2160 @ 30Hz ( 2:2:2 ) .As Per Details Specification Document Uploaded Separatelyref. Make: Beyerdynamic Design, Aten, Extron, Lightware, Kramer, Crestron, Canare, Cypress, Seada, Aja, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 27 Sitc Of 8-Channel High-Power Headphones Mixing And Distribution Amplifier Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Behringer, Beyerdynamic Design, Aten, Extron, Lightware, Kramer, Crestron, Canare, Cypress, Seada, Aja, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 28 Sitc Of Microsoft 365 With Soft Vc License Having Minimum Technical Specificationdescription: Teams; Outlook; Word; Excel; Power Point; Publisher ( Pc Only ) ; Access ( Pc Only ) ; Exchange; Onedrive; Sharepoint;License Duration: 01 ( One ) Years, License User: 1 User.Make: Microsoft 365 Business Standardas Per Details Specification Document Uploaded Separatelyref. Make: Microsoft Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 29 Sitc Of Networking Horizontal Un-Armoured Cat6 Cable Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiserwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 30 Sitc Of Indoor Information Outlet With Rj45 Adapter, Gi Box And Single Face Cover Plate Etc Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiserwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 31 Sitc Of 1Mtr Cat6 U / Utp Patch Chord Cable Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiserwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 32 Sitc Of 2Mtr Cat6 U / Utp Patch Chord Cable Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiserwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 33 Sitc Of Cat 6 U / Utp 24 Port Modular Fully Loaded Patch Panel Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Molex, 3C3, Legrand, Commscope, Belden, Derwiserwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 34 Sitc Of 12U Wall Mounted Cross Connect Equipment Network Rack Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Tata, Vertiv, Netrack, Valrack, Rittal, Apw, Mrswarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 35 Sitc Of 27 / 32U Floor Mounted Cross Connect Audio Video Equipment Rack Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Tata, Vertiv, Netrack, Valrack, Rittal, Apw, Mrswarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 36 Sitc & Laying Of Pvc Conduits ( Isi Marked ) Laying Through Surface With All Accessories As Required For The Entire System With All Oem Accessories. ( Quality: Mms; Ø=25Mm ) As Per Details Specification Document Uploaded Separatelymake: Precision, Presto Plast, Supreme, Quality : Isiwarranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 37 Sitc Of Single-Phase Ups Power Point To Network Racks At Different Location Having Minimum Technical Specificationas Per Details Specification Document Uploaded Separatelyref. Make: Schneider, Legrand, Hager, Siemens, L&T, Abb, Havellsref. Make ( Wire ) : Polycab, Mescab, Finolex, Havells, Warranty: 01 ( One ) Year Onsite Comprehensive Oem Warranty Including Parts, And Service Except Force Majeure. 38 Sitc Of: Ultra Flexible Premium Sdi / Vga / Hdmi Cable, Cat6 / Data Cable, Power Cable, Unarmoured Audio-Video, Speaker Cable, Xlr Connector Male-Female, Extension Cable, Control Panel, Architectural Adapter Plate, Headphone Db Splitter And Accessories, Audio Patch Panel With All Accessories, 24 / 20 Channel Analog Mixer Stand / Table / Self With Necessary Accessories, Pvc Conduits, Connectors & All Interconnects, And All Other Passive Accessories Will Required To Complete The Work, Etc:Quantity For Above Mentioned All Items: As Per Site Requirement.As Per Details Specification Document Uploaded Separatelyref. Make ( Architectural Adapter Plate ) : Elite Electric, Akamgo, Milan, Blackdote, Mx, Equivalent Logic, Rgblink, Equivalentref. Make ( Headphone Db Splitter ) : Elite Electric, Akamgo, Milan, Blackdote, Mx, Equivalent Logic, Rgblink, Equivalentref. Make ( Audio Patch Panel ) : Elite Electric, Akamgo, Milan, Blackdote, Mx, Equivalent Logic, Rgblink, Equivalentref. Make ( Audio, Speaker Cable ) : Extron, Lightware, Crestron, Canare, Belden, Sommer.Ref. Make ( Hdmi, Vga Cable ) : Extron, Lightware, Crestron, Canare, Belden, Sommer, Aten.Ref. Make ( Connectors, Etc ) : Swisscraft, Neutrik, Amphenol, Canare.Ref. Make ( Power, Cable ) : Polycab, Finolex, Eurocable, Belden, Havells, Ref. Make ( Pvc Conduits ) : Precision, Presto Plast, Supreme, Warranty: 01 ( One ) Years Onsite Comprehensive Oem Warranty With Parts And Service Except Force Majeure.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
38.
Law and Justice #10173107 AOC
Tender for Tender For Comprehensive Annual Maintenance Contract Of Servers, Desktop/Laptop Computers, Printers, U.P.S.S, Networking Components And Other It Peripherals. (For Three Years)
Contract Date: Apr 23, 2026 Contract Value : ₹ 85.25 Lakh
Government Departments No of Bidders 4
Uttarakhand View Result →
39.
Power #10074178 Price Bid
Gm/Cc/Gwl/Pur/20-21/11647 Dated 17 . 03 . 2021 Rate Contract For Supply AndInstallation Of Peripherals For Computer Printer And Networking Equipments Repairing Of Computers Printers And Toner Refilling In Various Type Of Printers For Offices Situated Under City CircleMpmkvvcl , Computer/Pc/Desktop , Ram ( Ddr-1 Ram 1 Gb ) , Ram ( Ddr-2 Ram 1 Gb ) , Ram ( Ddr-2 Ram 2 Gb ) , Ram ( Ddr-3 Ram 2 Gb ) , Ram ( Ddr-3 Ram 4 Gb ) , Hard Disc ( Sata 500 Gb ) , Hard Disc ( Sata 160 Gb ) , Hard Disc ( Sata 320 Gb ) , Hard Disc ( Sata 1 Tb ) , Ide Hdd 80 Gb , Dh 81 Mother Board Fan , Ide Hdd 320 Gb , Pci Sata Card , Dh 61 Mother Board Fan , Processor Fan ( For Core 2 Duo Or Higher Processor ) , Processor Fan ( For P-Iv Processor ) , Smps 500W , Graphic Card ( 1 Gb ) , Graphic Card ( 2 Gb ) , Pci Vga Display Card ( 8 Mb/16 Mb ) , Power Cable , Vga Cable , Key Board Usb , Key Board And Mouse Wireless Combo , Mouse Usb , Mouse Wireless , Atx Cabinet With Smps , Atx Cabinet Without Smps , Dvd Writer Sata , Mother Board Repairing Charges , Replacement Of Mother Board Dg 81 , Replacement Of Mother Board Dg 41 , Replacement Of Mother Board Dg 110 , Replacement Of Mother Board Dg 61 , Processor Intel Dual Core 2 . 6 Ghz Or Higher , Tft 18 . 5 , Tft 20 , Hdd Cable Ide , Hdd Cable Sata , Sata Power Connector , Cmos Battery , Usb Wifi Adopter , Wifi Network Card , Mouse Pad , Usb Card , Sound Card , Formating Of Computer , Re-Installation Of Os And Relevent Software , Servicing And Repairing Of Tft Monitor ( Damaged Not Included ) , Servicing And Repairing Of Crt Monitor ( Damaged Not Included ) , Laser Printer And Its Accessories , Opc Drum , Network Card , Pcr Roller , Chip Replacement , Wiper Blade , Doctor Blade , Printer Toner Refilling , Teflon Paper For Laser Printer , Pressure Roller For Richo S210 , Pressure Roller , Fuser Unit , Gear Assembly , Paper Pickup Assembly , Power Supply Card , Logic Card , Cartridge Sensor , Refilling Toner Hp 3015 , Opc Drum Hp3015 , Ricoh Sp210 Refilling Toner , Opc Drum Ricoh Sp210 , Brother Printer Refilling Toner , Brother Printer Opc Drum , Scanner Unit For Laser Printer , Magnetic Rod , Ricoh Toner Sp 101S Refilling , Printer Servicing , Opc Drum For Samsung 2826 , 2161 , 1666 , M1005mfp , Opc Drum For Panasonic , Laying And Jointing Pvc Pipe . Heading , Print Head For 9 Pin , Print Head For 24 Pin , Print Head Cable For 9 Pin , Print Head Cable For 24 Pin , Rd Assembly , Paper Sensor , Home Sensor , Paper Feed Gear , Paper Feed Motor , Lf Motor , Ribbin Cartridge For 9 Pin , Ribbin Cartridge For 24 Pin , Head Mask , Printer Head Repair Per Pin , Carriage Belt , Carriage Rail , Carriage Motor , Ups & Accessories , Ups 0 . 8 Kva , Transformer Charging Isolated 12 V Ac , Ups Charging Unit , Pcg Logic Card 600 Va/800 Va , Mosfet Regulator Component , Battery 12 V , 7 Ah Smf , , Battery 12 V , 12 Ah Smf , , Battery 12 V , 18 Ah Smf , , Battery 12 V , 21 Ah Smf , , Battery 12 V , 24 Ah Smf , , Battery 12 V , 65 Ah Smf , , Battery 12 V , 27 Ah Smf , , Battery 12 V , 75 Ah Smf , , Battery 12 V , 100 Ah Smf , , Microtech 600 Va , Apc 600 Va , Microtech 800 Va , Logic Card Repairing , Service Call Charge For Ups , Apc 800 Va , Online Ups Card Repairing , Online Ups Repairing Call Charges , Cartridge For Line Matrix Printer ( Lipi 6050 , 6306 , 6810 & Wipro Printonix P500 , P1500 , P7500 , Spool P500 , P1500 , Spool P500 , P1500 , Spool P500 , P1500 , Spool With Bar Code P7500 , Cartridge Bar Coded 6610 , Cartridge 6306 , Refilling Charges Per Catridge ( 6306/6610 ) , Cartridge 6800 , Refilling Charges Per Catridge ( 6800 ) , Cartridge And Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Cartridge For Laser Printer , Paper Tray , Drum Unit , Cartridge For Inkjet Printer , Miscellaneous Items , 500 Gb External Hdd , 1 Tb External Hdd , 2 Tb External Hdd , External Dvd Writter , Vga Cable For Projector 15 Mtr , Vga Cable For Projector 15 Mtr , Spike 5 Socket With 5 Meter Power Cable , Spike 5 Socket With 1 . 5 Meter Power Cable , Server Rack Spike , Blank Dvd Pack Of 25 , Blank Cd Pack Of 25 , Blank Dvd Pack Of 50 , Blank Cd Pack Of 50 , Single Phase Online With Mcb 5 Kva Voltage , Capacity-15 Amp . , Working Range ( Input ) 130-300V , Servicing Charge For Projector , Servicing Charge For Data Recovery , Scanner , Belt , Unit , Fuser Rod , Gear Assembly , Sensor , Power Adapter , Usb Cable , Networking Equipments , 5 Port 10/100 Mbps Fast Ethernet Switch , 8 Port 10/100 Mbps Fast Ethernet Switch , 16 Port 10/100 Mbps Fast Ethernet Switch , Power Adapter , Supply Of Rj 45 Connector ( Each ) , Power Adaper For 8/16/24 Port Lan Switch , Visisting For Services , Visisting Charges On Call Under Jurisdiction Of City Circle Mpmkvvcl , Gwalior
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Madhya Pradesh View Result →
40.
Educational and Research Institute #10030549 Technical Bid
Tender for Camc And Support Service With Spare Part Of Active & Passive Components Of Computer, Vc Equipment, Camera, Projector, Tablet Monitor, Plasma Display ,Desktop, Transmitters, Receivers, Amplifiers, Av Equipments Etc.,(E-Class Room Equipments List In Annexure -1) Ups And Computer Networking Hardware , Other Equipments Installed Under E-Class Room Project Govt. Medical College, Kota , Camc And Support Service With Spare Part Of Active & Passive Components Of Computer, Vc Equipment, Camera, Projector, Tablet Monitor, Plasma Display ,Desktop, Transmitters, Receivers, Amplifiers, Av Equipments Etc.,(E-Class Room Equipments List In Annexure -1) Ups And Computer Networking Hardware , Other Equipments Installed Under E-Class Room Project Govt. Medical College, Kota
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Rajasthan View Result →
41.
Defence #9991076 AOC
Bids Are Invited For Custom Bid For Services Annual Maintenance Service - Desktops, Laptops and Peripherals Annual Maintenance Contract for Networking Devices (Version 2) 1. The vendor to provide onsite comprehensive annual maintenance of DAQLS, RTPS, and IIPT systems at DIPAC inclusive of cost of spares but limited to hardware and Software up to OS level only. List of items placed as Appendix. 2 Any tools, test equipments and fixtures etc required for maintenance shall be provided by the vendor. 3. During the period of contact the firm shall maintain 98% serviceability of all the systems covered under AMC. All expenses directly/indirectly for repair shall have to be borne by the firm. 5. 10% of critical spares like hard disks, RAM, Graphics card, keyboard, mouse etc to be positioned at DIPAC 6. During the AMC period, vendor to forecast and ensure sufficient spares are stocked to avoid End of Life situation. 7 During the AMC period, Resident Engineer (RE) should be made available at DIPAC. The RE should have good knowledge on Linux, networking and computer hardware systems. The period of contract will be effective from date of appointment of RE with required skill sets. 8. The resident engineer to be available at DIPAC during normal working hours of DIPAC on all days excluding Saturday Sunday and Holidays. However occasionally the RE would be required to work on holiday due operational requirements. Incase onsite RE is to availa leave, a suitable replacement should be appointed by the firm 9. During the AMC period, firms RE or Service Engineer of its ASP shall attend to the reported fault/defect withinsix hours of logging of complaints and the defect is required to be rectified with in one day. In case the fault is of major nature, necessitating procurement of spares or expertise of original equipment supplier/higher formation of the firm, approval for extension of repair time in writing shall be obtained by the firm from DIPAC, failure of which would lead to inclusion of lapse period in system down time. 10. During the period of contract, the firm shall through its own personnel or through its Authorized Service Provider (ASP) shall attend to all breakdowns of Systems covered under AMC, rectify the faults there of and replace components of the Equipments/Systems with serviceable components. Such replacement shall be of free of cost on exchange basis. However, no damaged storage media of any sort Total Quantity :
Contract Date: Ref. Documents Contract Value : ₹ 3.22 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 11
Delhi View Result →
42.
Educational and Research Institute #9982157 Technical Bid
Tender for E-Tenderno.50-2025 Forsupply, Installation, Testing, Commissioning And Configuration Of Optical Fiber Cable (Ofc) Backbone Network Including Active And Passive Networking Components For Interconnecting All Schools And University Buildings Of Srtm University, Nanded , Supply, Installation, Testing, Commissioning And Configuration Of Optical Fiber Cable (Ofc) Backbone Network Including Active And Passive Networking Components For Interconnecting All Schools And University Buildings Of Srtm University, Nanded As Per Mentioned In Tender Document. , Active - Switches , Supply, Installation, Testing, Commissioning And Configuration Of 8X10g, 8Xsfp+ Managed Switch (Distribution) ( Approved Make - Netgear/Hpe/Cisco/Juniper ) , Supply, Installation, Testing, Commissioning And Configuration Of 10G Single Mode Duplex Lc Module (10G Module ) ( Approved Make - Netgear/Hpe/Cisco/Juniper ) , Supply, Installation, Testing, Commissioning And Configuration Of 1G Single Mode Duplex Lc Module (1G Module ) ( Approved Make - Netgear/Hpe/Cisco/Juniper ) , Supply, Installation, Testing, Commissioning And Configuration Of 10G 4-Port Gigabit Ethernet Smart Switch With 4 10G Sfp+ Ports ( 10G Uplink ) ( Approved Make - Netgear/Hpe/Cisco/Juniper ) , Supply, Installation, Testing, Commissioning And Configuration Of 1G 24 Port Gigabit Smart Manage Switch With 2 Sfp ( 1G Uplink ) ( Approved Make - Netgear/Hpe/Cisco/Juniper ) , Ups 1 Kva , Supply, Installation, Testing, Commissioning And Configuration Of 1Kva On-Line Rack Mount Ups , ( Approved Make - Apc / Vertiv / Schneider ) , Fiber Optic Backbone Singlemode , Supply, Installation, Testing, Commissioning And Configuration Of 25Mm Gi Flexible Pipe / Gi Pipe For Ofc Connectivity On The Compound Wall ( Approved Make - Precision / Flex Tubes / Krisstop ). Included Accessories , Supply, Installation, Testing, Commissioning And Configuration Of Steel Rope Wire For Overhead Optical Fiber Cable (Ofc) Installations ( In Meter ) Along With Pole Mount Blocks For Supports Cable ( 608 Nos ) ( Approved Make - Usha Martin / Bharat Wire Ropes / Wireco ) , Supply, Installation, Testing, Commissioning And Configuration Of 6Mtrs Pole With Accessories For Ofc Cable Laying , As Per Actual 6Mtr Hot Deep Galvanised Octagnal Pole 120X 70Mm X2.6Mm, Base 200 X200 X12mm & Foundation Bolt M16/600 ( 1 Set - 4 Pc ) As Per Actual ( Approved Make -Lightsol / Bajaj / Jindal ) , Supply, Installation, Testing, Commissioning And Configuration Of 6 Core Sm Os2 Optical Fiber Cable With Outdoor Corrugated Steel Tape Armoured, Unitube, Water Block Gel Filled, Uv Stabilized Polyethylene (Hdpe) Outer Jacket And Embedded With Two Steel Wires On The Periphery ( In Mtrs ) ( Approved Make -Molex/Systimax/Panduit ) , Supply, Installation, Testing, Commissioning And Configuration Of 12 Fiber Core Fixed Type Loaded Liu - Sm - Lc (Without Pigtails) (Approved Make -Molex/Systimax/Panduit ) , Supply, Installation, Testing, Commissioning And Configuration Of 24 Fiber Core Fixed Type Loaded Liu - Sm - Lc ( Without Pigtails ) ( Approved Make -Molex/Systimax/Panduit ) , Supply, Installation, Testing, Commissioning And Configuration Of 48 Fiber Core Fixed Type Loaded Liu - Sm - Lc ( Without Pigtails ) ( Approved Make -Molex/Systimax/Panduit ) , Supply, Installation, Testing, Commissioning And Configuration Of Lc Pigtails Fibre 9Μm (Os1/2) Sm - 1.5M ( Approved Make -Molex/Systimax/Panduit ) , Supply, Installation, Testing, Commissioning And Configuration Of Lc-Lc Patch Cord, (Os1/2) Sm, Ls0h - 3M ( Approved Make -Molex/Systimax/Panduit ) , Supply, Installation, Testing, Commissioning And Configuration Of 32Mm Hdpe & Gi Pipe And Accessories (Approved Make - Supreme /Prince / Finolex ) , Supply, Installation, Testing, Commissioning And Configuration Of 25Mm Hdpe & Gi Pipe And Accessories (Approved Make - Supreme /Prince / Finolex ) , Supply, Installation, Testing, Commissioning And Configuration Of 3 Core Copper Armoured Cable, 2.5 Sq Mm (Approved Make - Finolex / Havells / Polycab) , Supply, Installation, Testing, Commissioning And Configuration Of 8 Module Face Plate - 3 X 6/16 annual periodical maintenance Socket + 1 Nos 16 annual periodical maintenance Switch + 1 Dummy ( Approved Make - Havells / Anchor / Legrand ) , Supply, Installation, Testing, Commissioning And Configuration Of 8 Module Pvc Surface Box For Above Face Plate ( Approved Make - Havells / Anchor / Legrand ) , Network Racks & Accessories , Supply, Installation, Testing, Commissioning And Configuration Of 9U/550X600 Wallmount Rack With All Accessories ( Approved Make - Netrack/Valrack/Wq ) , Supply, Installation, Testing, Commissioning And Configuration Of 9U Wall Mount Out Door Rack: 9U/600X600 Rack/Wmod/Metal Door/Ip56 ( Approved Make - Netrack/Valrack/Wq ) , Supply, Installation, Testing, Commissioning And Configuration Of 12U/550X600 Wallmount Rack With All Accessories ( Approved Make - Netrack/Valrack/Wq ) , Supply, Installation, Testing, Commissioning And Configuration Of 15U Wall Mount Rack With All Accessories: 15U/550X600 Rack/Welded/Wm (Approved Make - Netrack/Valrack/Wq ) , Supply, Installation, Testing, Commissioning And Configuration Of 22U 600X600 Floor Mount Rack: 22Urack Frame/600X600/Steel/Fm/Casters Type 2 ( Approved Make - Netrack/Valrack/Wq ) , Supply, Installation, Testing, Commissioning And Configuration Of 42U 800X1000 Floor Mount Network Rack With All Accessories ( Approved Make - Netrack/Valrack/Wq )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Maharashtra View Result →
Kerala View Result →
West Bengal View Result →
Tamil Nadu View Result →
Karnataka View Result →
Maharashtra View Result →
Maharashtra View Result →
Maharashtra View Result →
50.
Educational and Research Institute #9746898 AOC
Bids are invited for the supply, installation, testing, and commissioning of a fully integrated conference, audio-visual, electrical, HVAC, acoustic, interior, and IT infrastructure system, including but not limited to chairman and delegate discussion units with removable microphones, central conference controller, DSP, amplifiers, speakers, displays, cameras, AV control systems, networking components, UPS, VRF HVAC system, ceilings, wall acoustics, furniture, lighting, cabling, power distribution, and allied accessories, along with construction works such as false partitions, flooring, acoustic doors, and conference tables, complete electrical wiring and fixtures, and comprehensive annual maintenance for 3 years with 1 year onsite support, for a total quantity of 4513 items.
Contract Date: Ref. Documents Contract Value : ₹ 1.90 Crore
Boards / Undertakings / PSU No of Bidders 3
Assam View Result →
TenderDetail
Loading tenders